From e6131fa3835483944c13d03bcff1d9103d9f53ce Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 6 Nov 2014 10:20:23 +0300 Subject: ARM: debug: move StrongARM debug include to arch/arm/include/debug StrongARM debug-macro.S is quite standalone thing, depending only on register mappings. Move it to proper place and add Kconfig entry. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Arnd Bergmann diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6a4ee00..6c23769 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -734,6 +734,14 @@ choice their output to UART 2. The port must have been initialised by the boot-loader before use. + config DEBUG_SA1100 + depends on ARCH_SA1100 + bool "Use SA1100 UARTs for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on SA-11x0 UART ports. The kernel will check for the first + enabled UART in a sequence 3-1-2. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -1052,6 +1060,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string + default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO diff --git a/arch/arm/include/debug/sa1100.S b/arch/arm/include/debug/sa1100.S new file mode 100644 index 0000000..a0ae4f4 --- /dev/null +++ b/arch/arm/include/debug/sa1100.S @@ -0,0 +1,68 @@ +/* arch/arm/include/debug/sa1100.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#define UTCR3 0x0c +#define UTDR 0x14 +#define UTSR1 0x20 +#define UTCR3_TXE 0x00000002 /* Transmit Enable */ +#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ +#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ + + .macro addruart, rp, rv, tmp + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + moveq \rp, #0x80000000 @ physical base address + movne \rp, #0xf8000000 @ virtual address + + @ We probe for the active serial port here, coherently with + @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. + @ We assume r1 can be clobbered. + + @ see if Ser3 is active + add \rp, \rp, #0x00050000 + ldr \rv, [\rp, #UTCR3] + tst \rv, #UTCR3_TXE + + @ if Ser3 is inactive, then try Ser1 + addeq \rp, \rp, #(0x00010000 - 0x00050000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE + + @ if Ser1 is inactive, then try Ser2 + addeq \rp, \rp, #(0x00030000 - 0x00010000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE + + @ clear top bits, and generate both phys and virt addresses + lsl \rp, \rp, #8 + lsr \rp, \rp, #8 + orr \rv, \rp, #0xf8000000 @ virtual + orr \rp, \rp, #0x80000000 @ physical + + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UTDR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UTSR1] + tst \rd, #UTSR1_TNF + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #UTSR1] + tst \rd, #UTSR1_TBY + bne 1001b + .endm diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S deleted file mode 100644 index 530772d..0000000 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ /dev/null @@ -1,62 +0,0 @@ -/* arch/arm/mach-sa1100/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include - - .macro addruart, rp, rv, tmp - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - moveq \rp, #0x80000000 @ physical base address - movne \rp, #0xf8000000 @ virtual address - - @ We probe for the active serial port here, coherently with - @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. - @ We assume r1 can be clobbered. - - @ see if Ser3 is active - add \rp, \rp, #0x00050000 - ldr \rv, [\rp, #UTCR3] - tst \rv, #UTCR3_TXE - - @ if Ser3 is inactive, then try Ser1 - addeq \rp, \rp, #(0x00010000 - 0x00050000) - ldreq \rv, [\rp, #UTCR3] - tsteq \rv, #UTCR3_TXE - - @ if Ser1 is inactive, then try Ser2 - addeq \rp, \rp, #(0x00030000 - 0x00010000) - ldreq \rv, [\rp, #UTCR3] - tsteq \rv, #UTCR3_TXE - - @ clear top bits, and generate both phys and virt addresses - lsl \rp, \rp, #8 - lsr \rp, \rp, #8 - orr \rv, \rp, #0xf8000000 @ virtual - orr \rp, \rp, #0x80000000 @ physical - - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UTDR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TNF - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TBY - bne 1001b - .endm -- cgit v0.10.2