From 9e8147bb5ec5d1dda2141da70f96b98985a306cb Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Sep 2013 23:09:36 +0800 Subject: ARM: imx6q: move low-power code out of clock driver The LPM (Low Power Mode) code that currently sits in imx6q clock driver will be reused by imx6sl. Let's move it into pm-imx6q.c, so that we can keep clock driver SoC specific and reuse pm-imx6q.c on imx6sl. In order to avoid adding another ioremap for CCM block, imx6q_pm_set_ccm_base() is created to let clock driver set up ccm_base for pm code. During the move, the unused CCGR macros get removed. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 07bc0d8..d756d91 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -25,155 +24,6 @@ #include "common.h" #include "hardware.h" -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CCGR0 0x68 -#define CCGR1 0x6c -#define CCGR2 0x70 -#define CCGR3 0x74 -#define CCGR4 0x78 -#define CCGR5 0x7c -#define CCGR6 0x80 -#define CCGR7 0x84 - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - static bool last_rbc_mode; - - if (last_rbc_mode == enable) - return; - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); - - last_rbc_mode = enable; -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - static bool last_wb_mode; - - if (last_wb_mode == enable) - return; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); - - last_wb_mode = enable; -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - imx6q_enable_wb(false); - imx6q_enable_rbc(false); - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - break; - default: - return -EINVAL; - } - - writel_relaxed(val, ccm_base + CLPCR); - - return 0; -} - static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; @@ -384,7 +234,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); - ccm_base = base; + + imx6q_pm_set_ccm_base(base); /* name reg shift width parent_names num_parents */ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); @@ -627,9 +478,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (IS_ENABLED(CONFIG_PCI_IMX6)) clk_set_parent(clk[lvds1_sel], clk[sata_ref]); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index ddcbd90..fde6661 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -147,9 +147,11 @@ int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM void imx6q_pm_init(void); +void imx6q_pm_set_ccm_base(void __iomem *base); void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 2049427..461a895 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -10,9 +10,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include #include #include +#include #include #include #include @@ -22,6 +24,146 @@ #include "common.h" #include "hardware.h" +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + +static void __iomem *ccm_base; + +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + static bool last_rbc_mode; + + if (last_rbc_mode == enable) + return; + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); + + last_rbc_mode = enable; +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + static bool last_wb_mode; + + if (last_wb_mode == enable) + return; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); + + last_wb_mode = enable; +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + imx6q_enable_wb(false); + imx6q_enable_rbc(false); + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + imx6q_enable_wb(true); + imx6q_enable_rbc(true); + break; + default: + return -EINVAL; + } + + writel_relaxed(val, ccm_base + CLPCR); + + return 0; +} + static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -55,7 +197,17 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = suspend_valid_only_mem, }; +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + void __init imx6q_pm_init(void) { + WARN_ON(!ccm_base); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + suspend_set_ops(&imx6q_pm_ops); } -- cgit v0.10.2