From 7194efb8f063ee3aa0cb50d9002348887e68ec10 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 5 Apr 2012 14:45:47 +0300 Subject: mmc: fixes for eMMC v4.5 discard operation eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Cc: Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 2517547..996f8e3 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -139,7 +139,7 @@ static void mmc_queue_setup_discard(struct request_queue *q, queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); q->limits.max_discard_sectors = max_discard; - if (card->erased_byte == 0) + if (card->erased_byte == 0 && !mmc_can_discard(card)) q->limits.discard_zeroes_data = 1; q->limits.discard_granularity = card->pref_erase << 9; /* granularity must not be greater than max. discard */ diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7474c47..83db5ef 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1409,7 +1409,10 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, { unsigned int erase_timeout; - if (card->ext_csd.erase_group_def & 1) { + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { /* High Capacity Erase Group Size uses HC timeouts */ if (arg == MMC_TRIM_ARG) erase_timeout = card->ext_csd.trim_timeout; @@ -1681,8 +1684,6 @@ int mmc_can_trim(struct mmc_card *card) { if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) return 1; - if (mmc_can_discard(card)) - return 1; return 0; } EXPORT_SYMBOL(mmc_can_trim); -- cgit v0.10.2 From 283028122db37621b124f079ca8eae5b64807ad4 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 5 Apr 2012 14:45:48 +0300 Subject: mmc: fixes for eMMC v4.5 sanitize operation eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Cc: Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index b180965..4232bc4 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -873,7 +873,7 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, { struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; - unsigned int from, nr, arg; + unsigned int from, nr, arg, trim_arg, erase_arg; int err = 0, type = MMC_BLK_SECDISCARD; if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) { @@ -881,20 +881,26 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, goto out; } + from = blk_rq_pos(req); + nr = blk_rq_sectors(req); + /* The sanitize operation is supported at v4.5 only */ if (mmc_can_sanitize(card)) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_SANITIZE_START, 1, 0); - goto out; + erase_arg = MMC_ERASE_ARG; + trim_arg = MMC_TRIM_ARG; + } else { + erase_arg = MMC_SECURE_ERASE_ARG; + trim_arg = MMC_SECURE_TRIM1_ARG; } - from = blk_rq_pos(req); - nr = blk_rq_sectors(req); - - if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) - arg = MMC_SECURE_TRIM1_ARG; - else - arg = MMC_SECURE_ERASE_ARG; + if (mmc_erase_group_aligned(card, from, nr)) + arg = erase_arg; + else if (mmc_can_trim(card)) + arg = trim_arg; + else { + err = -EINVAL; + goto out; + } retry: if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -904,25 +910,41 @@ retry: INAND_CMD38_ARG_SECERASE, 0); if (err) - goto out; + goto out_retry; } + err = mmc_erase(card, from, nr, arg); - if (!err && arg == MMC_SECURE_TRIM1_ARG) { + if (err == -EIO) + goto out_retry; + if (err) + goto out; + + if (arg == MMC_SECURE_TRIM1_ARG) { if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, 0); if (err) - goto out; + goto out_retry; } + err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); + if (err == -EIO) + goto out_retry; + if (err) + goto out; } -out: - if (err == -EIO && !mmc_blk_reset(md, card->host, type)) + + if (mmc_can_sanitize(card)) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_SANITIZE_START, 1, 0); +out_retry: + if (err && !mmc_blk_reset(md, card->host, type)) goto retry; if (!err) mmc_blk_reset_success(md, type); +out: spin_lock_irq(&md->lock); __blk_end_request(req, err, blk_rq_bytes(req)); spin_unlock_irq(&md->lock); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 83db5ef..e541efb 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1702,6 +1702,8 @@ EXPORT_SYMBOL(mmc_can_discard); int mmc_can_sanitize(struct mmc_card *card) { + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) return 1; return 0; -- cgit v0.10.2 From b6d085f6f59108508c1eea9c5251deb765350c50 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Tue, 10 Apr 2012 09:57:36 -0400 Subject: mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m Commit 46856a68dc ("mmc: omap_hsmmc: Convert hsmmc driver to use device tree") introduced in 3.4-rc1 has a missing semi-colon, causing: drivers/mmc/host/omap_hsmmc.c:1745: error: expected ',' or ';' before 'extern' Reported-by: Russell King Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 5c2b1c1..cfd049c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1741,7 +1741,7 @@ static const struct of_device_id omap_mmc_of_match[] = { .data = &omap4_reg_offset, }, {}, -} +}; MODULE_DEVICE_TABLE(of, omap_mmc_of_match); static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) -- cgit v0.10.2 From 4d048f915f32c8455605b106aa0de2cf68a71903 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 11 Apr 2012 15:33:13 +0530 Subject: mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage of_have_populated_dt() is not expected to be used in drivers but instead only in early platform init code. Drivers on the other hand should rely on dev->of_node or of_match_device(). Besides usage of of_have_populated_dt() also throws up build error as below which was reported by Balaji TK, when omap_hsmmc is built as a module. ERROR: "allnodes" [drivers/mmc/host/omap_hsmmc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 So get rid of all of_have_populated_dt() usage in omap_hsmmc driver and instead use dev->of_node to make the same dicisions as earlier. Signed-off-by: Rajendra Nayak Reported-by: Benoit Cousson Cc: Sebastian Andrzej Siewior Acked-by: Rob Herring Reviewed-by: Balaji T K Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index cfd049c..56d4499 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -249,7 +249,7 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, * the pbias cell programming support is still missing when * booting with Device tree */ - if (of_have_populated_dt() && !vdd) + if (dev->of_node && !vdd) return 0; if (mmc_slot(host).before_set_reg) @@ -1549,7 +1549,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * can't be allowed when booting with device * tree. */ - (!of_have_populated_dt())) { + !host->dev->of_node) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to -- cgit v0.10.2 From 32d317c60e56c2a34463b51fc0336cc96b3e1735 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Wed, 11 Apr 2012 19:54:38 +0800 Subject: mmc: remove MMC bus legacy suspend/resume method MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html Signed-off-by: Chuanxiao Dong Tested-by: Hebbar, Gururaja Acked-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4232bc4..dabec55 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1824,7 +1824,7 @@ static void mmc_blk_remove(struct mmc_card *card) } #ifdef CONFIG_PM -static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) +static int mmc_blk_suspend(struct mmc_card *card) { struct mmc_blk_data *part_md; struct mmc_blk_data *md = mmc_get_drvdata(card); diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 3f60606..c60cee9 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev) return 0; } -static int mmc_bus_suspend(struct device *dev, pm_message_t state) +static int mmc_bus_suspend(struct device *dev) { struct mmc_driver *drv = to_mmc_driver(dev->driver); struct mmc_card *card = mmc_dev_to_card(dev); int ret = 0; if (dev->driver && drv->suspend) - ret = drv->suspend(card, state); + ret = drv->suspend(card); return ret; } @@ -165,20 +165,14 @@ static int mmc_runtime_idle(struct device *dev) return pm_runtime_suspend(dev); } +#endif /* !CONFIG_PM_RUNTIME */ + static const struct dev_pm_ops mmc_bus_pm_ops = { - .runtime_suspend = mmc_runtime_suspend, - .runtime_resume = mmc_runtime_resume, - .runtime_idle = mmc_runtime_idle, + SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, + mmc_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume) }; -#define MMC_PM_OPS_PTR (&mmc_bus_pm_ops) - -#else /* !CONFIG_PM_RUNTIME */ - -#define MMC_PM_OPS_PTR NULL - -#endif /* !CONFIG_PM_RUNTIME */ - static struct bus_type mmc_bus_type = { .name = "mmc", .dev_attrs = mmc_dev_attrs, @@ -186,9 +180,7 @@ static struct bus_type mmc_bus_type = { .uevent = mmc_bus_uevent, .probe = mmc_bus_probe, .remove = mmc_bus_remove, - .suspend = mmc_bus_suspend, - .resume = mmc_bus_resume, - .pm = MMC_PM_OPS_PTR, + .pm = &mmc_bus_pm_ops, }; int mmc_register_bus(void) diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 01beae7..629b823 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -481,7 +481,7 @@ struct mmc_driver { struct device_driver drv; int (*probe)(struct mmc_card *); void (*remove)(struct mmc_card *); - int (*suspend)(struct mmc_card *, pm_message_t); + int (*suspend)(struct mmc_card *); int (*resume)(struct mmc_card *); }; -- cgit v0.10.2 From a99aa9b9b4f4f3e496d17a1b4e0ff63fb0c9f31d Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Tue, 10 Apr 2012 09:53:32 +0900 Subject: mmc: dw_mmc: Fix switch from DMA to PIO When dw_mci_pre_dma_transfer returns failure in some reasons, dw_mci_submit_data will prepare to switch the PIO mode from DMA. After switching to PIO mode, DMA(IDMAC in particular) is still enabled. This makes the corruption in handling interrupt and the driver lock-up. Signed-off-by: Seungwon Jeon Acked-by: Will Newton Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index bf3c9b4..f3b0fcd 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -526,8 +526,10 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) return -ENODEV; sg_len = dw_mci_pre_dma_transfer(host, data, 0); - if (sg_len < 0) + if (sg_len < 0) { + host->dma_ops->stop(host); return sg_len; + } host->using_dma = 1; -- cgit v0.10.2 From 87b87a3fc0eec58d95e4216392f889a26439ad22 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 10 Apr 2012 00:14:20 +0100 Subject: mmc: sdhci: refine non-removable card checking for card detection Commit c79396c191bc19 ("mmc: sdhci: prevent card detection activity for non-removable cards") disables card detection where the cards are marked as non-removable. This makes sense, but the implementation detail of calling mmc_card_is_removable() causes some problems, because mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root filesystem is stored on SD, but we also have external SD card slots where we want automatic card detection. Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE, which is defined to mean that the card is *really* nonremovable. This could be revisited in future if we find a way to improve CONFIG_MMC_UNSAFE_RESUME semantics. Signed-off-by: Daniel Drake Acked-by: Chuanxiao Dong [stable@: please apply to 3.3-stable] Cc: stable Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9aa77f3..ccefdeb 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -147,7 +147,7 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) u32 present, irqs; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || - !mmc_card_is_removable(host->mmc)) + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) return; present = sdhci_readl(host, SDHCI_PRESENT_STATE) & -- cgit v0.10.2 From 5ca6518832ac913ac277b50ceddda8372dbf7bea Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 17 Apr 2012 13:03:38 -0700 Subject: mmc: cd-gpio: Include header to pickup exported symbol prototypes Include the linux/mmc/cd-gpio.h header to pickup the prototypes for the two exported symbols. This quiets the sparse warnings: warning: symbol 'mmc_cd_gpio_request' was not declared. Should it be static? warning: symbol 'mmc_cd_gpio_free' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten Acked-by: Guennadi Liakhovetski Acked-by: Venkatraman S Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 29de31e..2c14be7 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From b89152824f993a9572b47eb31f4579feadeac34c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Wed, 18 Apr 2012 02:30:20 +0200 Subject: mmc: unbreak sdhci-esdhc-imx on i.MX25 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by: Eric Bénard Acked-by: Wolfram Sang Cc: stable Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 6193a0d..8abdaf6 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -467,8 +467,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) clk_prepare_enable(clk); pltfm_host->clk = clk; - if (!is_imx25_esdhc(imx_data)) - host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */ -- cgit v0.10.2 From e1631f989e0c6c8d9b43a2dbdd1097f70da603a5 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Wed, 18 Apr 2012 15:42:31 +0900 Subject: mmc: dw_mmc: prevent NULL dereference for dma_ops Now, dma_ops is assumed that use the IDMAC. But if dma_ops is assigned the pdata->dma_ops, we didn't ensure that callback function is defined. If the callback isn't defined, then we should run in PIO mode. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Will Newton Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index f3b0fcd..ab3fc46 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1881,7 +1881,8 @@ static void dw_mci_init_dma(struct dw_mci *host) if (!host->dma_ops) goto no_dma; - if (host->dma_ops->init) { + if (host->dma_ops->init && host->dma_ops->start && + host->dma_ops->stop && host->dma_ops->cleanup) { if (host->dma_ops->init(host)) { dev_err(&host->dev, "%s: Unable to initialize " "DMA Controller.\n", __func__); -- cgit v0.10.2 From 7c5709194096beea1ab6e6db46768d70a068efb0 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 19 Apr 2012 11:55:25 +0200 Subject: mmc: core: Do not pre-claim host in suspend Since SDIO drivers may want to do some SDIO operations in their suspend callback functions, we must not keep the host claimed when calling them. Daniel Drake reported that libertas_sdio encountered a deadlock in its suspend function. Signed-off-by: Ulf Hansson Tested-by: Daniel Drake [stable@: please apply to 3.2-stable and 3.3-stable] Cc: stable Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index e541efb..ba821fe 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2238,6 +2238,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable) mmc_card_is_removable(host)) return err; + mmc_claim_host(host); if (card && mmc_card_mmc(card) && (card->ext_csd.cache_size > 0)) { enable = !!enable; @@ -2255,6 +2256,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable) card->ext_csd.cache_ctrl = enable; } } + mmc_release_host(host); return err; } @@ -2272,49 +2274,32 @@ int mmc_suspend_host(struct mmc_host *host) cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); - if (mmc_try_claim_host(host)) { - err = mmc_cache_ctrl(host, 0); - mmc_release_host(host); - } else { - err = -EBUSY; - } + err = mmc_cache_ctrl(host, 0); if (err) goto out; mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { - /* - * A long response time is not acceptable for device drivers - * when doing suspend. Prevent mmc_claim_host in the suspend - * sequence, to potentially wait "forever" by trying to - * pre-claim the host. - */ - if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) { - err = host->bus_ops->suspend(host); - } - mmc_release_host(host); + if (host->bus_ops->suspend) + err = host->bus_ops->suspend(host); - if (err == -ENOSYS || !host->bus_ops->resume) { - /* - * We simply "remove" the card in this case. - * It will be redetected on resume. (Calling - * bus_ops->remove() with a claimed host can - * deadlock.) - */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_power_off(host); - mmc_release_host(host); - host->pm_flags = 0; - err = 0; - } - } else { - err = -EBUSY; + if (err == -ENOSYS || !host->bus_ops->resume) { + /* + * We simply "remove" the card in this case. + * It will be redetected on resume. (Calling + * bus_ops->remove() with a claimed host can + * deadlock.) + */ + if (host->bus_ops->remove) + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + host->pm_flags = 0; + err = 0; } } mmc_bus_put(host); -- cgit v0.10.2