From 7bcdca95c039d1cd1cfddd6aa012026b409ddb14 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Sun, 6 Mar 2011 10:04:31 +0000 Subject: ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c Signed-off-by: Alexander Clouter Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 8554707..edb1dd2 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void) /* enable devices if magic matches */ switch ((ts78xx_fpga.id >> 8) & 0xffffff) { case TS7800_FPGA_MAGIC: - printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n", + pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n", ts78xx_fpga.id & 0xff); ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; @@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rtc.present == 1) { tmp = ts78xx_ts_rtc_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RTC not registered\n"); + pr_info("TS-78xx: RTC not registered\n"); ts78xx_fpga.supports.ts_rtc.present = 0; } ret |= tmp; @@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_nand.present == 1) { tmp = ts78xx_ts_nand_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: NAND not registered\n"); + pr_info("TS-78xx: NAND not registered\n"); ts78xx_fpga.supports.ts_nand.present = 0; } ret |= tmp; @@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rng.present == 1) { tmp = ts78xx_ts_rng_load(); if (tmp) { - printk(KERN_INFO "TS-78xx: RNG not registered\n"); + pr_info("TS-78xx: RNG not registered\n"); ts78xx_fpga.supports.ts_rng.present = 0; } ret |= tmp; @@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void) { ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff); @@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void) * UrJTAG SVN since r1381 can be used to reprogram the FPGA */ if (ts78xx_fpga.id != fpga_id) { - printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n" + pr_err("TS-78xx FPGA: magic/rev mismatch\n" "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); @@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, int value, ret; if (ts78xx_fpga.state < 0) { - printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n"); + pr_err("TS-78xx FPGA: borked, you must powercycle asap\n"); return -EBUSY; } @@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) value = 0; else { - printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n"); + pr_err("ts78xx_fpga_store: Invalid value\n"); return -EINVAL; } @@ -616,7 +616,7 @@ static void __init ts78xx_init(void) ret = ts78xx_fpga_load(); ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); if (ret) - printk(KERN_ERR "sysfs_create_file failed: %d\n", ret); + pr_err("sysfs_create_file failed: %d\n", ret); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") -- cgit v0.10.2 From 7428fff20494935b4ce767d7c80de077e8d1d745 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 17:55:45 +0100 Subject: ARM: pxa: PalmTE2: Use gpio arrays in backlight init Use gpio_request_array() / gpio_free_array() in backlight init and exit functions. This makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 3f25014..66311c7 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct gpio palmte_bl_gpios[] = { + { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, + { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, +}; + static int palmte2_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMTE2_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static int palmte2_backlight_notify(struct device *dev, int brightness) @@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness) static void palmte2_backlight_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTE2_BL_POWER); - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); + gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static struct platform_pwm_backlight_data palmte2_backlight_data = { -- cgit v0.10.2 From e593106ca409e5e37d18121d922fc4f449c60d41 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 18:40:49 +0100 Subject: ARM: pxa: Use gpio arrays in colibri_pcmcia driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c index a520395..443cb7f 100644 --- a/drivers/pcmcia/pxa2xx_colibri.c +++ b/drivers/pcmcia/pxa2xx_colibri.c @@ -34,14 +34,24 @@ #define COLIBRI320_DETECT_GPIO 81 #define COLIBRI320_READY_GPIO 29 -static struct { - int reset_gpio; - int ppen_gpio; - int bvd1_gpio; - int bvd2_gpio; - int detect_gpio; - int ready_gpio; -} colibri_pcmcia_gpio; +enum { + DETECT = 0, + READY = 1, + BVD1 = 2, + BVD2 = 3, + PPEN = 4, + RESET = 5, +}; + +/* Contents of this array are configured on-the-fly in init function */ +static struct gpio colibri_pcmcia_gpios[] = { + { 0, GPIOF_IN, "PCMCIA Detect" }, + { 0, GPIOF_IN, "PCMCIA Ready" }, + { 0, GPIOF_IN, "PCMCIA BVD1" }, + { 0, GPIOF_IN, "PCMCIA BVD2" }, + { 0, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { 0, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; static struct pcmcia_irqs colibri_irqs[] = { { @@ -54,88 +64,42 @@ static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret; - ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT"); + ret = gpio_request_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); if (ret) goto err1; - ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio); - if (ret) - goto err2; - - ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY"); - if (ret) - goto err2; - ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio); - if (ret) - goto err3; - ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1"); - if (ret) - goto err3; - ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio); - if (ret) - goto err4; + colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio); + skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio); - ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2"); - if (ret) - goto err4; - ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio); - if (ret) - goto err5; - - ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN"); - if (ret) - goto err5; - ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0); - if (ret) - goto err6; - - ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET"); - if (ret) - goto err6; - ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1); + ret = soc_pcmcia_request_irqs(skt, colibri_irqs, + ARRAY_SIZE(colibri_irqs)); if (ret) - goto err7; - - colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio); - skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio); + goto err2; - return soc_pcmcia_request_irqs(skt, colibri_irqs, - ARRAY_SIZE(colibri_irqs)); + return ret; -err7: - gpio_free(colibri_pcmcia_gpio.detect_gpio); -err6: - gpio_free(colibri_pcmcia_gpio.ready_gpio); -err5: - gpio_free(colibri_pcmcia_gpio.bvd1_gpio); -err4: - gpio_free(colibri_pcmcia_gpio.bvd2_gpio); -err3: - gpio_free(colibri_pcmcia_gpio.reset_gpio); err2: - gpio_free(colibri_pcmcia_gpio.ppen_gpio); + gpio_free_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); err1: return ret; } static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { - gpio_free(colibri_pcmcia_gpio.detect_gpio); - gpio_free(colibri_pcmcia_gpio.ready_gpio); - gpio_free(colibri_pcmcia_gpio.bvd1_gpio); - gpio_free(colibri_pcmcia_gpio.bvd2_gpio); - gpio_free(colibri_pcmcia_gpio.reset_gpio); - gpio_free(colibri_pcmcia_gpio.ppen_gpio); + gpio_free_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); } static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) { - state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio); - state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio); - state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio); - state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio); + state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio); + state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio); + state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio); + state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio); state->wrprot = 0; state->vs_3v = 1; state->vs_Xv = 0; @@ -145,9 +109,10 @@ static int colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { - gpio_set_value(colibri_pcmcia_gpio.ppen_gpio, + gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio, !(state->Vcc == 33 && state->Vpp < 50)); - gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET); + gpio_set_value(colibri_pcmcia_gpios[RESET].gpio, + state->flags & SS_RESET); return 0; } @@ -190,20 +155,20 @@ static int __init colibri_pcmcia_init(void) /* Colibri PXA270 */ if (machine_is_colibri()) { - colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO; - colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO; - colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO; - colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO; - colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO; - colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO; + colibri_pcmcia_gpios[RESET].gpio = COLIBRI270_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI270_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI270_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI270_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI270_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI270_READY_GPIO; /* Colibri PXA320 */ } else if (machine_is_colibri320()) { - colibri_pcmcia_gpio.reset_gpio = COLIBRI320_RESET_GPIO; - colibri_pcmcia_gpio.ppen_gpio = COLIBRI320_PPEN_GPIO; - colibri_pcmcia_gpio.bvd1_gpio = COLIBRI320_BVD1_GPIO; - colibri_pcmcia_gpio.bvd2_gpio = COLIBRI320_BVD2_GPIO; - colibri_pcmcia_gpio.detect_gpio = COLIBRI320_DETECT_GPIO; - colibri_pcmcia_gpio.ready_gpio = COLIBRI320_READY_GPIO; + colibri_pcmcia_gpios[RESET].gpio = COLIBRI320_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI320_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI320_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI320_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI320_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI320_READY_GPIO; } ret = platform_device_add_data(colibri_pcmcia_device, -- cgit v0.10.2 From 2070417dffa9e75b370a5c0dee8c5dc3605e1c4d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 18:49:07 +0100 Subject: ARM: pxa: Use gpio arrays in palmld_pcmcia driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c index 6fb6f7f..59f8405 100644 --- a/drivers/pcmcia/pxa2xx_palmld.c +++ b/drivers/pcmcia/pxa2xx_palmld.c @@ -20,49 +20,27 @@ #include #include "soc_common.h" +static struct gpio palmld_pcmcia_gpios[] = { + { GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" }, + { GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, + { GPIO_NR_PALMLD_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" }, +}; + static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret; - ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR"); - if (ret) - goto err1; - ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1); - if (ret) - goto err3; - - ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY"); - if (ret) - goto err3; - ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY); - if (ret) - goto err4; + ret = gpio_request_array(palmld_pcmcia_gpios, + ARRAY_SIZE(palmld_pcmcia_gpios)); skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY); - return 0; -err4: - gpio_free(GPIO_NR_PALMLD_PCMCIA_READY); -err3: - gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET); -err2: - gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER); -err1: return ret; } static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { - gpio_free(GPIO_NR_PALMLD_PCMCIA_READY); - gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET); - gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER); + gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios)); } static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt, -- cgit v0.10.2 From ba388307946cf86050d63cd398b4b341e2fb5043 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 18:59:43 +0100 Subject: ARM: pxa: Use gpio arrays in palmtc_pcmcia driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c index 459a232..e655af9 100644 --- a/drivers/pcmcia/pxa2xx_palmtc.c +++ b/drivers/pcmcia/pxa2xx_palmtc.c @@ -21,79 +21,30 @@ #include #include "soc_common.h" +static struct gpio palmtc_pcmcia_gpios[] = { + { GPIO_NR_PALMTC_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" }, + { GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, + { GPIO_NR_PALMTC_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" }, + { GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" }, +}; + static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret; - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1"); - if (ret) - goto err1; - ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0); - if (ret) - goto err3; - - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3"); - if (ret) - goto err3; - ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0); - if (ret) - goto err4; - - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST"); - if (ret) - goto err4; - ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1); - if (ret) - goto err5; - - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY"); - if (ret) - goto err5; - ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY); - if (ret) - goto err6; - - ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY"); - if (ret) - goto err6; - ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY); - if (ret) - goto err7; + ret = gpio_request_array(palmtc_pcmcia_gpios, + ARRAY_SIZE(palmtc_pcmcia_gpios)); skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY); - return 0; -err7: - gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY); -err6: - gpio_free(GPIO_NR_PALMTC_PCMCIA_READY); -err5: - gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET); -err4: - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3); -err3: - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2); -err2: - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1); -err1: return ret; } static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { - gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY); - gpio_free(GPIO_NR_PALMTC_PCMCIA_READY); - gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET); - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3); - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2); - gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1); + gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios)); } static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt, -- cgit v0.10.2 From 235a175c401ab2d79d63f08257acebe1558a0621 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 18:59:55 +0100 Subject: ARM: pxa: Use gpio arrays in palmtx_pcmcia driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c index b07b247..06f7f14 100644 --- a/drivers/pcmcia/pxa2xx_palmtx.c +++ b/drivers/pcmcia/pxa2xx_palmtx.c @@ -13,67 +13,34 @@ #include #include +#include #include - -#include #include - #include "soc_common.h" +static struct gpio palmtx_pcmcia_gpios[] = { + { GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, + { GPIO_NR_PALMTX_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" }, +}; + static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret; - ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1"); - if (ret) - goto err1; - ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0); - if (ret) - goto err3; - - ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST"); - if (ret) - goto err3; - ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1); - if (ret) - goto err4; - - ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY"); - if (ret) - goto err4; - ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY); - if (ret) - goto err5; + ret = gpio_request_array(palmtx_pcmcia_gpios, + ARRAY_SIZE(palmtx_pcmcia_gpios)); skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY); - return 0; -err5: - gpio_free(GPIO_NR_PALMTX_PCMCIA_READY); -err4: - gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET); -err3: - gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2); -err2: - gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1); -err1: return ret; } static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { - gpio_free(GPIO_NR_PALMTX_PCMCIA_READY); - gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET); - gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2); - gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1); + gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios)); } static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt, -- cgit v0.10.2 From e27af7edda008d225ad542c3b6645483683a7e91 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 19:11:16 +0100 Subject: ARM: pxa: Use gpio arrays in vpac270_pcmcia driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. Signed-off-by: Marek Vasut diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index 55627ec..c13f411 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -22,6 +22,19 @@ #include "soc_common.h" +static struct gpio vpac270_pcmcia_gpios[] = { + { GPIO84_VPAC270_PCMCIA_CD, GPIOF_IN, "PCMCIA Card Detect" }, + { GPIO35_VPAC270_PCMCIA_RDY, GPIOF_IN, "PCMCIA Ready" }, + { GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" }, +}; + +static struct gpio vpac270_cf_gpios[] = { + { GPIO17_VPAC270_CF_CD, GPIOF_IN, "CF Card Detect" }, + { GPIO12_VPAC270_CF_RDY, GPIOF_IN, "CF Ready" }, + { GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" }, +}; + static struct pcmcia_irqs cd_irqs[] = { { .sock = 0, @@ -40,96 +53,34 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) int ret; if (skt->nr == 0) { - ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD"); - if (ret) - goto err1; - ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD); - if (ret) - goto err2; - - ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY"); - if (ret) - goto err2; - ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY); - if (ret) - goto err3; - - ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN"); - if (ret) - goto err3; - ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0); - if (ret) - goto err4; - - ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET"); - if (ret) - goto err4; - ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0); - if (ret) - goto err5; + ret = gpio_request_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY); - return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1); - -err5: - gpio_free(GPIO11_VPAC270_PCMCIA_RESET); -err4: - gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); -err3: - gpio_free(GPIO35_VPAC270_PCMCIA_RDY); -err2: - gpio_free(GPIO84_VPAC270_PCMCIA_CD); -err1: - return ret; - + if (!ret) + ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1); } else { - ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD"); - if (ret) - goto err6; - ret = gpio_direction_input(GPIO17_VPAC270_CF_CD); - if (ret) - goto err7; - - ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY"); - if (ret) - goto err7; - ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY); - if (ret) - goto err8; - - ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET"); - if (ret) - goto err8; - ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0); - if (ret) - goto err9; + ret = gpio_request_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY); - return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1); - -err9: - gpio_free(GPIO16_VPAC270_CF_RESET); -err8: - gpio_free(GPIO12_VPAC270_CF_RDY); -err7: - gpio_free(GPIO17_VPAC270_CF_CD); -err6: - return ret; - + if (!ret) + ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1); } + + return ret; } static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { - gpio_free(GPIO11_VPAC270_PCMCIA_RESET); - gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); - gpio_free(GPIO35_VPAC270_PCMCIA_RDY); - gpio_free(GPIO84_VPAC270_PCMCIA_CD); - gpio_free(GPIO16_VPAC270_CF_RESET); - gpio_free(GPIO12_VPAC270_CF_RDY); - gpio_free(GPIO17_VPAC270_CF_CD); + if (skt->nr == 0) + gpio_request_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); + else + gpio_request_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); } static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, -- cgit v0.10.2 From 6b1e3fca6ffb981db05688b1660a5d03d242edd4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 19:19:05 +0100 Subject: ARM: pxa: Use gpio arrays in palmld_hdd driver Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. This patch also properly frees GPIOs in case ata_host_activate() call fails. Signed-off-by: Marek Vasut diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c index 11fb4cc..fecf527 100644 --- a/drivers/ata/pata_palmld.c +++ b/drivers/ata/pata_palmld.c @@ -33,6 +33,11 @@ #define DRV_NAME "pata_palmld" +static struct gpio palmld_hdd_gpios[] = { + { GPIO_NR_PALMLD_IDE_PWEN, GPIOF_INIT_HIGH, "HDD Power" }, + { GPIO_NR_PALMLD_IDE_RESET, GPIOF_INIT_LOW, "HDD Reset" }, +}; + static struct scsi_host_template palmld_sht = { ATA_PIO_SHT(DRV_NAME), }; @@ -52,28 +57,23 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev) /* allocate host */ host = ata_host_alloc(&pdev->dev, 1); - if (!host) - return -ENOMEM; + if (!host) { + ret = -ENOMEM; + goto err1; + } /* remap drive's physical memory address */ mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000); - if (!mem) - return -ENOMEM; + if (!mem) { + ret = -ENOMEM; + goto err1; + } /* request and activate power GPIO, IRQ GPIO */ - ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR"); + ret = gpio_request_array(palmld_hdd_gpios, + ARRAY_SIZE(palmld_hdd_gpios)); if (ret) goto err1; - ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1); - if (ret) - goto err2; - - ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0); - if (ret) - goto err3; /* reset the drive */ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0); @@ -96,13 +96,15 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev) ata_sff_std_ports(&ap->ioaddr); /* activate host */ - return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, + ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, &palmld_sht); + if (ret) + goto err2; + + return ret; -err3: - gpio_free(GPIO_NR_PALMLD_IDE_RESET); err2: - gpio_free(GPIO_NR_PALMLD_IDE_PWEN); + gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios)); err1: return ret; } @@ -116,8 +118,7 @@ static __devexit int palmld_pata_remove(struct platform_device *dev) /* power down the HDD */ gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0); - gpio_free(GPIO_NR_PALMLD_IDE_RESET); - gpio_free(GPIO_NR_PALMLD_IDE_PWEN); + gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios)); return 0; } -- cgit v0.10.2 From 9ed3fbf1cbc2b747b3532985059f4738c15f4c07 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 15 Jan 2011 19:22:19 +0100 Subject: ARM: pxa: Update copyright notices for Palm devices Signed-off-by: Marek Vasut diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 35572c4..4c9a938 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -1,8 +1,7 @@ /* * Common code for Palm LD, T5, TX, Z72 * - * Copyright (C) 2010 - * Marek Vasut + * Copyright (C) 2010-2011 Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c index 59f8405..69f7367 100644 --- a/drivers/pcmcia/pxa2xx_palmld.c +++ b/drivers/pcmcia/pxa2xx_palmld.c @@ -4,7 +4,7 @@ * Driver for Palm LifeDrive PCMCIA * * Copyright (C) 2006 Alex Osborne - * Copyright (C) 2007-2008 Marek Vasut + * Copyright (C) 2007-2011 Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c index e655af9..d0ad6a7 100644 --- a/drivers/pcmcia/pxa2xx_palmtc.c +++ b/drivers/pcmcia/pxa2xx_palmtc.c @@ -4,7 +4,7 @@ * Driver for Palm Tungsten|C PCMCIA * * Copyright (C) 2008 Alex Osborne - * Copyright (C) 2009 Marek Vasut + * Copyright (C) 2009-2011 Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c index 06f7f14..1a25804 100644 --- a/drivers/pcmcia/pxa2xx_palmtx.c +++ b/drivers/pcmcia/pxa2xx_palmtx.c @@ -3,7 +3,7 @@ * * Driver for Palm T|X PCMCIA * - * Copyright (C) 2007-2008 Marek Vasut + * Copyright (C) 2007-2011 Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index c13f411..435002d 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -3,8 +3,7 @@ * * Driver for Voipac PXA270 PCMCIA and CF sockets * - * Copyright (C) 2010 - * Marek Vasut + * Copyright (C) 2010-2011 Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v0.10.2 From 54a93b69a4341a14acb67e0bb19b9bf1cc878cb2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 13 Jan 2011 11:45:30 +0100 Subject: ARM: pxa: PalmZ72: Add OV9640 camera support Rework of patch from 2009: PalmZ72: Add support for OV9640 camera sensor Signed-off-by: Marek Vasut diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2bbcf70..0d4700a 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -44,6 +44,11 @@ #define GPIO_NR_PALMZ72_BT_POWER 17 #define GPIO_NR_PALMZ72_BT_RESET 83 +/* Camera */ +#define GPIO_NR_PALMZ72_CAM_PWDN 56 +#define GPIO_NR_PALMZ72_CAM_RESET 57 +#define GPIO_NR_PALMZ72_CAM_POWER 91 + /** Initial values **/ /* Battery */ diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 7bf4017..27a8e6d 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -47,6 +48,9 @@ #include #include +#include + +#include #include "generic.h" #include "devices.h" @@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO22_GPIO, /* LCD border color */ GPIO96_GPIO, /* lcd power */ + /* PXA Camera */ + GPIO81_CIF_DD_0, + GPIO48_CIF_DD_5, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO84_CIF_FV, + GPIO85_CIF_LV, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + + GPIO56_GPIO, /* OV9640 Powerdown */ + GPIO57_GPIO, /* OV9640 Reset */ + GPIO91_GPIO, /* OV9640 Power */ + + /* I2C */ + GPIO117_GPIO, /* I2C_SCL */ + GPIO118_GPIO, /* I2C_SDA */ + /* Misc. */ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ GPIO88_GPIO, /* green led */ @@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init); #endif /****************************************************************************** + * SoC Camera + ******************************************************************************/ +#if defined(CONFIG_SOC_CAMERA_OV9640) || \ + defined(CONFIG_SOC_CAMERA_OV9640_MODULE) +static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +/* Board I2C devices. */ +static struct i2c_board_info palmz72_i2c_device[] = { + { + I2C_BOARD_INFO("ov9640", 0x30), + } +}; + +static int palmz72_camera_power(struct device *dev, int power) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); + mdelay(50); + return 0; +} + +static int palmz72_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); + mdelay(50); + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); + mdelay(50); + return 0; +} + +static struct soc_camera_link palmz72_iclink = { + .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ + .board_info = &palmz72_i2c_device[0], + .i2c_adapter_id = 0, + .module_name = "ov96xx", + .power = &palmz72_camera_power, + .reset = &palmz72_camera_reset, + .flags = SOCAM_DATAWIDTH_8, +}; + +static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { + .sda_pin = 118, + .scl_pin = 117, + .udelay = 10, + .timeout = 100, +}; + +static struct platform_device palmz72_i2c_bus_device = { + .name = "i2c-gpio", + .id = 0, /* we use this as a replacement for i2c-pxa */ + .dev = { + .platform_data = &palmz72_i2c_bus_data, + } +}; + +static struct platform_device palmz72_camera = { + .name = "soc-camera-pdrv", + .id = -1, + .dev = { + .platform_data = &palmz72_iclink, + }, +}; + +/* Here we request the camera GPIOs and configure them. We power up the camera + * module, deassert the reset pin, but put it into powerdown (low to no power + * consumption) mode. This allows us to later bring the module up fast. */ +static struct gpio palmz72_camera_gpios[] = { + { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, + { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, + { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, +}; + +static inline void __init palmz72_cam_gpio_init(void) +{ + int ret; + + ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + if (!ret) + gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + else + printk(KERN_ERR "Camera GPIO init failed!\n"); + + return; +} + +static void __init palmz72_camera_init(void) +{ + palmz72_cam_gpio_init(); + pxa_set_camera_info(&palmz72_pxacamera_platform_data); + platform_device_register(&palmz72_i2c_bus_device); + platform_device_register(&palmz72_camera); +} +#else +static inline void palmz72_camera_init(void) {} +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init palmz72_init(void) @@ -276,6 +402,7 @@ static void __init palmz72_init(void) palm27x_pmic_init(); palmz72_kpc_init(); palmz72_leds_init(); + palmz72_camera_init(); } MACHINE_START(PALMZ72, "Palm Zire72") -- cgit v0.10.2 From 4321e1a12b811c02441240aa6183156791204f3f Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 15 Feb 2011 15:37:30 +0800 Subject: ARM: pxa: clean up set_pxa_fb_info set_pxa_fb_info() has been a long-standing wart in the naming scheme of the pxa_set_xxx_info() functions. This renames the function, and combines set_pxa_fb_parent() with set_pxa_fb_info(). Signed-off-by: Russell King Acked-by: Igor Grinberg Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 3499fad..10964e3 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = { }; /* this gets called as part of our init. these steps must be done now so - * that we can use set_pxa_fb_info */ + * that we can use pxa_set_fb_info */ static void __init am200_presetup_fb(void) { int fw; @@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void) /* we divide since we told the LCD controller we're 16bpp */ am200_fb_info.modes->xres /= 2; - set_pxa_fb_info(&am200_fb_info); + pxa_set_fb_info(NULL, &am200_fb_info); } diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a134a14..1539577 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -264,7 +264,7 @@ static void __init balloon3_lcd_init(void) } balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; - set_pxa_fb_info(&balloon3_lcd_screen); + pxa_set_fb_info(NULL, &balloon3_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index b734d84..8225e2e 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display); static void __init cmx2xx_init_display(void) { - set_pxa_fb_info(cmx2xx_display); + pxa_set_fb_info(NULL, cmx2xx_display); } #else static inline void cmx2xx_init_display(void) {} diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7984268..0c9cfbc 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = { static void __init cm_x300_init_lcd(void) { - set_pxa_fb_info(&cm_x300_lcd); + pxa_set_fb_info(NULL, &cm_x300_lcd); } #else static inline void cm_x300_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 07b62a0..c2f164b 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -176,7 +176,7 @@ static struct pxafb_mach_info income_lcd_screen = { static void __init income_lcd_init(void) { - set_pxa_fb_info(&income_lcd_screen); + pxa_set_fb_info(NULL, &income_lcd_screen); } #else static inline void income_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 96b2d9f..3f9be41 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin) lcd_bl_pin = bl_pin; gpio_request(bl_pin, "lcd backlight"); gpio_direction_output(bl_pin, 0); - set_pxa_fb_info(&sharp_lq43_info); + pxa_set_fb_info(NULL, &sharp_lq43_info); } #endif diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4c766e3..edfe803 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -188,16 +188,12 @@ struct platform_device pxa_device_fb = { .resource = pxafb_resources, }; -void __init set_pxa_fb_info(struct pxafb_mach_info *info) +void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info) { + pxa_device_fb.dev.parent = parent; pxa_register_device(&pxa_device_fb, info); } -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - static struct resource pxa_resource_ffuart[] = { { .start = 0x40100000, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a78bb30..2da03a4 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = { static void __init em_x270_init_lcd(void) { - set_pxa_fb_info(&em_x270_lcd); + pxa_set_fb_info(NULL, &em_x270_lcd); } #else static inline void em_x270_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index edca0a0..8fdf5a3 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -344,7 +344,7 @@ static void __init e400_init(void) /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); + pxa_set_fb_info(NULL, &e400_pxafb_mach_info); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); pxa_set_udc_info(&e7xx_udc_mach_info); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 87cec0a..fcd366a 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -783,7 +783,7 @@ static void __init a780_init(void) pxa_set_i2c_info(NULL); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); @@ -853,7 +853,7 @@ static void __init e680_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&e680_keypad_platform_data); @@ -918,7 +918,7 @@ static void __init a1200_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a1200_keypad_platform_data); @@ -1103,7 +1103,7 @@ static void __init a910_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a910_keypad_platform_data); @@ -1173,7 +1173,7 @@ static void __init e6_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e6_keypad_platform_data); @@ -1212,7 +1212,7 @@ static void __init e2_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e2_keypad_platform_data); diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index dd40e4a..f7fb64f 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -167,7 +167,7 @@ static void __init idp_init(void) platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&idp_mci_platform_data); } diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 160ec83..01a45ac4 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -154,8 +154,8 @@ struct pxafb_mach_info { void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); void (*smart_update)(struct fb_info *); }; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index ccb7bfa..4b2c45f 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = { static void littleton_init_lcd(void) { - set_pxa_fb_info(&littleton_lcd_info); + pxa_set_fb_info(NULL, &littleton_lcd_info); } #else static inline void littleton_init_lcd(void) {}; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index c9a3e77..8aebc58 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -480,7 +480,7 @@ static void __init lpd270_init(void) pxa_set_ac97_info(NULL); if (lpd270_lcd_to_use != NULL) - set_pxa_fb_info(lpd270_lcd_to_use); + pxa_set_fb_info(NULL, lpd270_lcd_to_use); pxa_set_ohci_info(&lpd270_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dca20de..12a2a56 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -521,7 +521,7 @@ static void __init lubbock_init(void) clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 41198f0..ad70264 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -757,7 +757,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); - set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d4b6f23..a58f522 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -592,7 +592,7 @@ static void __init mainstone_init(void) else mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; - set_pxa_fb_info(&mainstone_pxafb_info); + pxa_set_fb_info(NULL, &mainstone_pxafb_info); mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index faafea3..18e05b1 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void) pxa_set_stuart_info(NULL); mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); - set_pxa_fb_info(&mioa701_pxafb_info); + pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); pxa_set_udc_info(&mioa701_udc_info); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 4c9a938..5c93728 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -158,7 +158,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; } - set_pxa_fb_info(&palm27x_lcd_screen); + pxa_set_fb_info(NULL, &palm27x_lcd_screen); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index a09a237..fb06bd0 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = { static void __init palmtc_lcd_init(void) { - set_pxa_fb_info(&palmtc_lcd_screen); + pxa_set_fb_info(NULL, &palmtc_lcd_screen); } #else static inline void palmtc_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 66311c7..726f5b9 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -346,7 +346,7 @@ static void __init palmte2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_fb_info(NULL, &palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); pxa_set_ac97_info(&palmte2_ac97_pdata); diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 90820fa..c1a6448 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void) pcm990_init_irq(); #ifndef CONFIG_PCM990_DISPLAY_NONE - set_pxa_fb_info(&pcm990_fbinfo); + pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif platform_device_register(&pcm990_backlight_device); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 4f0ff1a..be68ec5 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -445,8 +445,7 @@ static void __init poodle_init(void) if (ret) pr_warning("poodle: Unable to register LoCoMo device\n"); - set_pxa_fb_parent(&poodle_locomo_device.dev); - set_pxa_fb_info(&poodle_fb_info); + pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8361151..d9a5791 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void) { int ret; - set_pxa_fb_info(&raumfeld_sharp_lcd_info); + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); /* Earlier devices had the backlight regulator controlled * via PWM, later versions use another controller for that */ diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index c1ca8cb..dd0118f 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = { static void __init saar_init_lcd(void) { - set_pxa_fb_info(&saar_lcd_info); + pxa_set_fb_info(NULL, &saar_lcd_info); } #else static inline void saar_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b49a2c2..e646b6d 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -725,7 +725,7 @@ static struct pxafb_mach_info spitz_pxafb_info = { static void __init spitz_lcd_init(void) { - set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_fb_info(NULL, &spitz_pxafb_info); } #else static inline void spitz_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 9cecf83..53d4a47 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void) { platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); - set_pxa_fb_info(&tavorevb_lcd_info); + pxa_set_fb_info(NULL, &tavorevb_lcd_info); } #else static inline void tavorevb_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 423261d..fa510fd 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -516,9 +516,9 @@ static void __init trizeps4_init(void) pxa_set_stuart_info(NULL); if (0) /* dont know how to determine LCD */ - set_pxa_fb_info(&sharp_lcd); + pxa_set_fb_info(NULL, &sharp_lcd); else - set_pxa_fb_info(&toshiba_lcd); + pxa_set_fb_info(NULL, &toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); #ifndef STATUS_LEDS_ON_STUART_PINS diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 49eeeab..53b2495 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -932,7 +932,7 @@ static void __init viper_init(void) /* Wake-up serial console */ viper_init_serial_gpio(); - set_pxa_fb_info(&fb_info); + pxa_set_fb_info(NULL, &fb_info); /* v1 hardware cannot use the datacs line */ version = viper_hw_version(); diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index b9b5797..a46f8d1 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -573,7 +573,7 @@ static void __init vpac270_lcd_init(void) } vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; - set_pxa_fb_info(&vpac270_lcd_screen); + pxa_set_fb_info(NULL, &vpac270_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index a323e07..084c724 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -272,7 +272,7 @@ static struct pxafb_mach_info z2_lcd_screen = { static void __init z2_lcd_init(void) { - set_pxa_fb_info(&z2_lcd_screen); + pxa_set_fb_info(NULL, &z2_lcd_screen); } #else static inline void z2_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index f4b053b..3db0ba4 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -847,7 +847,7 @@ static void __init zeus_init(void) if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); else - set_pxa_fb_info(&zeus_fb_info); + pxa_set_fb_info(NULL, &zeus_fb_info); pxa_set_mci_info(&zeus_mci_platform_data); pxa_set_udc_info(&zeus_udc_info); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index a4c784a..5821185 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void) platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { - set_pxa_fb_info(&zylonite_sharp_lcd_info); + pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info); return; } @@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void) else zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; - set_pxa_fb_info(&zylonite_toshiba_lcd_info); + pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info); } #else static inline void zylonite_init_lcd(void) {} -- cgit v0.10.2 From ccc46e29a63c88aa9ac72aac86ff0cfd5c627a11 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 24 Nov 2010 11:54:23 +0800 Subject: ARM: pxa: auto compute shift and mult of timer Use auto-computed shift and mult of timer with new API clocksource_calc_mult_shift()/clockevents_calc_mult_shift(). Signed-off-by: Haojian Zhuang Cc: Nicolas Pitre Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index e7f64d9..428da3f 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = pxa_osmr0_set_next_event, .set_mode = pxa_osmr0_set_mode, @@ -135,8 +134,8 @@ static void __init pxa_timer_init(void) init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); - ckevt_pxa_osmr0.mult = - div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4); + clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = -- cgit v0.10.2 From 133dce0687b4c38184609fa921d060a54dff93e9 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 14 Feb 2011 15:33:16 +0300 Subject: ARM: pxa/eseries: switch to using gpio-vbus transceiver Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus tranceiver. Signed-off-by: Dmitry Eremin-Solenikov Cc: Ian Molton Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 8fdf5a3..2e3970f 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,6 +20,7 @@ #include #include #include +#include #include