From 4f3549d72d1b5c90ecc7e673402f38f4486d22c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 22:15:29 +0200 Subject: Driver core: Add offline/online device operations In some cases, graceful hot-removal of devices is not possible, although in principle the devices in question support hotplug. For example, that may happen for the last CPU in the system or for memory modules holding kernel memory. In those cases it is nice to be able to check if the given device can be gracefully hot-removed before triggering a removal procedure that cannot be aborted or reversed. Unfortunately, however, the kernel currently doesn't provide any support for that. To address that deficiency, introduce support for offline and online operations that can be performed on devices, respectively, before a hot-removal and in case when it is necessary (or convenient) to put a device back online after a successful offline (that has not been followed by removal). The idea is that the offline will fail whenever the given device cannot be gracefully removed from the system and it will not be allowed to use the device after a successful offline (until a subsequent online) in analogy with the existing CPU offline/online mechanism. For now, the offline and online operations are introduced at the bus type level, as that should be sufficient for the most urgent use cases (CPUs and memory modules). In the future, however, the approach may be extended to cover some more complicated device offline/online scenarios involving device drivers etc. The lock_device_hotplug() and unlock_device_hotplug() functions are introduced because subsequent patches need to put larger pieces of code under device_hotplug_lock to prevent race conditions between device offline and removal from happening. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani diff --git a/Documentation/ABI/testing/sysfs-devices-online b/Documentation/ABI/testing/sysfs-devices-online new file mode 100644 index 0000000..f990026 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-online @@ -0,0 +1,20 @@ +What: /sys/devices/.../online +Date: April 2013 +Contact: Rafael J. Wysocki +Description: + The /sys/devices/.../online attribute is only present for + devices whose bus types provide .online() and .offline() + callbacks. The number read from it (0 or 1) reflects the value + of the device's 'offline' field. If that number is 1 and '0' + (or 'n', or 'N') is written to this file, the device bus type's + .offline() callback is executed for the device and (if + successful) its 'offline' field is updated accordingly. In + turn, if that number is 0 and '1' (or 'y', or 'Y') is written to + this file, the device bus type's .online() callback is executed + for the device and (if successful) its 'offline' field is + updated as appropriate. + + After a successful execution of the bus type's .offline() + callback the device cannot be used for any purpose until either + it is removed (i.e. device_del() is called for it), or its bus + type's .online() is exeucted successfully. diff --git a/drivers/base/core.c b/drivers/base/core.c index 016312437..60c9756 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -403,6 +403,36 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, static struct device_attribute uevent_attr = __ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent); +static ssize_t show_online(struct device *dev, struct device_attribute *attr, + char *buf) +{ + bool val; + + lock_device_hotplug(); + val = !dev->offline; + unlock_device_hotplug(); + return sprintf(buf, "%u\n", val); +} + +static ssize_t store_online(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + bool val; + int ret; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + lock_device_hotplug(); + ret = val ? device_online(dev) : device_offline(dev); + unlock_device_hotplug(); + return ret < 0 ? ret : count; +} + +static struct device_attribute online_attr = + __ATTR(online, S_IRUGO | S_IWUSR, show_online, store_online); + static int device_add_attributes(struct device *dev, struct device_attribute *attrs) { @@ -516,6 +546,12 @@ static int device_add_attrs(struct device *dev) if (error) goto err_remove_type_groups; + if (device_supports_offline(dev) && !dev->offline_disabled) { + error = device_create_file(dev, &online_attr); + if (error) + goto err_remove_type_groups; + } + return 0; err_remove_type_groups: @@ -536,6 +572,7 @@ static void device_remove_attrs(struct device *dev) struct class *class = dev->class; const struct device_type *type = dev->type; + device_remove_file(dev, &online_attr); device_remove_groups(dev, dev->groups); if (type) @@ -1431,6 +1468,99 @@ EXPORT_SYMBOL_GPL(put_device); EXPORT_SYMBOL_GPL(device_create_file); EXPORT_SYMBOL_GPL(device_remove_file); +static DEFINE_MUTEX(device_hotplug_lock); + +void lock_device_hotplug(void) +{ + mutex_lock(&device_hotplug_lock); +} + +void unlock_device_hotplug(void) +{ + mutex_unlock(&device_hotplug_lock); +} + +static int device_check_offline(struct device *dev, void *not_used) +{ + int ret; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + return device_supports_offline(dev) && !dev->offline ? -EBUSY : 0; +} + +/** + * device_offline - Prepare the device for hot-removal. + * @dev: Device to be put offline. + * + * Execute the device bus type's .offline() callback, if present, to prepare + * the device for a subsequent hot-removal. If that succeeds, the device must + * not be used until either it is removed or its bus type's .online() callback + * is executed. + * + * Call under device_hotplug_lock. + */ +int device_offline(struct device *dev) +{ + int ret; + + if (dev->offline_disabled) + return -EPERM; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = 1; + } else { + ret = dev->bus->offline(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_OFFLINE); + dev->offline = true; + } + } + } + device_unlock(dev); + + return ret; +} + +/** + * device_online - Put the device back online after successful device_offline(). + * @dev: Device to be put back online. + * + * If device_offline() has been successfully executed for @dev, but the device + * has not been removed subsequently, execute its bus type's .online() callback + * to indicate that the device can be used again. + * + * Call under device_hotplug_lock. + */ +int device_online(struct device *dev) +{ + int ret = 0; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = dev->bus->online(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_ONLINE); + dev->offline = false; + } + } else { + ret = 1; + } + } + device_unlock(dev); + + return ret; +} + struct root_device { struct device dev; struct module *owner; diff --git a/include/linux/device.h b/include/linux/device.h index c0a1261..eeb3331 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -71,6 +71,10 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); * the specific driver's probe to initial the matched device. * @remove: Called when a device removed from this bus. * @shutdown: Called at shut-down time to quiesce the device. + * + * @online: Called to put the device back online (after offlining it). + * @offline: Called to put the device offline for hot-removal. May fail. + * * @suspend: Called when a device on this bus wants to go to sleep mode. * @resume: Called to bring a device on this bus out of sleep mode. * @pm: Power management operations of this bus, callback the specific @@ -104,6 +108,9 @@ struct bus_type { int (*remove)(struct device *dev); void (*shutdown)(struct device *dev); + int (*online)(struct device *dev); + int (*offline)(struct device *dev); + int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); @@ -648,6 +655,8 @@ struct acpi_dev_node { * @release: Callback to free the device after all references have * gone away. This should be set by the allocator of the * device (i.e. the bus driver that discovered the device). + * @offline_disabled: If set, the device is permanently online. + * @offline: Set after successful invocation of bus type's .offline(). * * At the lowest level, every device in a Linux system is represented by an * instance of struct device. The device structure contains the information @@ -720,6 +729,9 @@ struct device { void (*release)(struct device *dev); struct iommu_group *iommu_group; + + bool offline_disabled:1; + bool offline:1; }; static inline struct device *kobj_to_dev(struct kobject *kobj) @@ -856,6 +868,15 @@ extern const char *device_get_devnode(struct device *dev, extern void *dev_get_drvdata(const struct device *dev); extern int dev_set_drvdata(struct device *dev, void *data); +static inline bool device_supports_offline(struct device *dev) +{ + return dev->bus && dev->bus->offline && dev->bus->online; +} + +extern void lock_device_hotplug(void); +extern void unlock_device_hotplug(void); +extern int device_offline(struct device *dev); +extern int device_online(struct device *dev); /* * Root device objects for grouping under /sys/devices */ -- cgit v0.10.2 From 0902a9044fa5b7a0456ea4daacec2c2b3189ba8c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 May 2013 00:25:49 +0200 Subject: Driver core: Use generic offline/online for CPU offline/online Rework the CPU hotplug code in drivers/base/cpu.c to use the generic offline/online support introduced previously instead of its own CPU-specific code. For this purpose, modify cpu_subsys to provide offline and online callbacks for CONFIG_HOTPLUG_CPU set and remove the code handling the CPU-specific 'online' sysfs attribute. This modification is not supposed to change the user-observable behavior of the kernel (i.e. the 'online' attribute will be present in exactly the same place in sysfs and should trigger exactly the same actions as before). Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 3d48fc8..25c8768 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -16,12 +16,6 @@ #include "base.h" -struct bus_type cpu_subsys = { - .name = "cpu", - .dev_name = "cpu", -}; -EXPORT_SYMBOL_GPL(cpu_subsys); - static DEFINE_PER_CPU(struct device *, cpu_sys_devices); #ifdef CONFIG_HOTPLUG_CPU @@ -34,69 +28,45 @@ static void change_cpu_under_node(struct cpu *cpu, cpu->node_id = to_nid; } -static ssize_t show_online(struct device *dev, - struct device_attribute *attr, - char *buf) +static int __ref cpu_subsys_online(struct device *dev) { struct cpu *cpu = container_of(dev, struct cpu, dev); + int cpuid = dev->id; + int from_nid, to_nid; + int ret; + + cpu_hotplug_driver_lock(); + + from_nid = cpu_to_node(cpuid); + ret = cpu_up(cpuid); + /* + * When hot adding memory to memoryless node and enabling a cpu + * on the node, node number of the cpu may internally change. + */ + to_nid = cpu_to_node(cpuid); + if (from_nid != to_nid) + change_cpu_under_node(cpu, from_nid, to_nid); - return sprintf(buf, "%u\n", !!cpu_online(cpu->dev.id)); + cpu_hotplug_driver_unlock(); + return ret; } -static ssize_t __ref store_online(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int cpu_subsys_offline(struct device *dev) { - struct cpu *cpu = container_of(dev, struct cpu, dev); - int cpuid = cpu->dev.id; - int from_nid, to_nid; - ssize_t ret; + int ret; cpu_hotplug_driver_lock(); - switch (buf[0]) { - case '0': - ret = cpu_down(cpuid); - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_OFFLINE); - break; - case '1': - from_nid = cpu_to_node(cpuid); - ret = cpu_up(cpuid); - - /* - * When hot adding memory to memoryless node and enabling a cpu - * on the node, node number of the cpu may internally change. - */ - to_nid = cpu_to_node(cpuid); - if (from_nid != to_nid) - change_cpu_under_node(cpu, from_nid, to_nid); - - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_ONLINE); - break; - default: - ret = -EINVAL; - } + ret = cpu_down(dev->id); cpu_hotplug_driver_unlock(); - - if (ret >= 0) - ret = count; return ret; } -static DEVICE_ATTR(online, 0644, show_online, store_online); -static void __cpuinit register_cpu_control(struct cpu *cpu) -{ - device_create_file(&cpu->dev, &dev_attr_online); -} void unregister_cpu(struct cpu *cpu) { int logical_cpu = cpu->dev.id; unregister_cpu_under_node(logical_cpu, cpu_to_node(logical_cpu)); - device_remove_file(&cpu->dev, &dev_attr_online); - device_unregister(&cpu->dev); per_cpu(cpu_sys_devices, logical_cpu) = NULL; return; @@ -123,12 +93,18 @@ static DEVICE_ATTR(probe, S_IWUSR, NULL, cpu_probe_store); static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ -#else /* ... !CONFIG_HOTPLUG_CPU */ -static inline void register_cpu_control(struct cpu *cpu) -{ -} #endif /* CONFIG_HOTPLUG_CPU */ +struct bus_type cpu_subsys = { + .name = "cpu", + .dev_name = "cpu", +#ifdef CONFIG_HOTPLUG_CPU + .online = cpu_subsys_online, + .offline = cpu_subsys_offline, +#endif +}; +EXPORT_SYMBOL_GPL(cpu_subsys); + #ifdef CONFIG_KEXEC #include @@ -277,12 +253,11 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->dev.id = num; cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; + cpu->dev.offline_disabled = !cpu->hotpluggable; #ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE cpu->dev.bus->uevent = arch_cpu_uevent; #endif error = device_register(&cpu->dev); - if (!error && cpu->hotpluggable) - register_cpu_control(cpu); if (!error) per_cpu(cpu_sys_devices, num) = &cpu->dev; if (!error) -- cgit v0.10.2 From 683058e315f00a216fd6c79df4f63bc9945ca434 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 May 2013 00:26:16 +0200 Subject: ACPI / hotplug: Use device offline/online for graceful hot-removal Modify the generic ACPI hotplug code to be able to check if devices scheduled for hot-removal may be gracefully removed from the system using the device offline/online mechanism introduced previously. Namely, make acpi_scan_hot_remove() handling device hot-removal call device_offline() for all physical companions of the ACPI device nodes involved in the operation and check the results. If any of the device_offline() calls fails, the function will not progress to the removal phase (which cannot be aborted), unless its (new) force argument is set (in case of a failing offline it will put the devices offlined by it back online). In support of 'forced' device hot-removal, add a new sysfs attribute 'force_remove' that will reside under /sys/firmware/acpi/hotplug/. Signed-off-by: Rafael J. Wysocki Reviewed-by: Toshi Kani diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index ce9bee9..b4436cca 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -44,6 +44,16 @@ Description: or 0 (unset). Attempts to write any other values to it will cause -EINVAL to be returned. +What: /sys/firmware/acpi/hotplug/force_remove +Date: May 2013 +Contact: Rafael J. Wysocki +Description: + The number in this file (0 or 1) determines whether (1) or not + (0) the ACPI subsystem will allow devices to be hot-removed even + if they cannot be put offline gracefully (from the kernel's + viewpoint). That number can be changed by writing a boolean + value to this file. + What: /sys/firmware/acpi/interrupts/ Date: February 2008 Contact: Len Brown diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9..4548f0a 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -47,6 +47,8 @@ void acpi_memory_hotplug_init(void); static inline void acpi_memory_hotplug_init(void) {} #endif +extern bool acpi_force_hot_remove; + void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug, const char *name); int acpi_scan_add_handler_with_hotplug(struct acpi_scan_handler *handler, diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd..4fd3920 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -27,6 +27,12 @@ extern struct acpi_device *acpi_root; #define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent) +/* + * If set, devices will be hot-removed even if they cannot be put offline + * gracefully (from the kernel's standpoint). + */ +bool acpi_force_hot_remove; + static const char *dummy_hid = "device"; static LIST_HEAD(acpi_device_list); @@ -120,6 +126,59 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL); +static acpi_status acpi_bus_offline_companions(acpi_handle handle, u32 lvl, + void *data, void **ret_p) +{ + struct acpi_device *device = NULL; + struct acpi_device_physical_node *pn; + acpi_status status = AE_OK; + + if (acpi_bus_get_device(handle, &device)) + return AE_OK; + + mutex_lock(&device->physical_node_lock); + + list_for_each_entry(pn, &device->physical_node_list, node) { + int ret; + + ret = device_offline(pn->dev); + if (acpi_force_hot_remove) + continue; + + if (ret < 0) { + status = AE_ERROR; + break; + } + pn->put_online = !ret; + } + + mutex_unlock(&device->physical_node_lock); + + return status; +} + +static acpi_status acpi_bus_online_companions(acpi_handle handle, u32 lvl, + void *data, void **ret_p) +{ + struct acpi_device *device = NULL; + struct acpi_device_physical_node *pn; + + if (acpi_bus_get_device(handle, &device)) + return AE_OK; + + mutex_lock(&device->physical_node_lock); + + list_for_each_entry(pn, &device->physical_node_list, node) + if (pn->put_online) { + device_online(pn->dev); + pn->put_online = false; + } + + mutex_unlock(&device->physical_node_lock); + + return AE_OK; +} + static int acpi_scan_hot_remove(struct acpi_device *device) { acpi_handle handle = device->handle; @@ -136,10 +195,33 @@ static int acpi_scan_hot_remove(struct acpi_device *device) return -EINVAL; } + lock_device_hotplug(); + + status = acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, + NULL, acpi_bus_offline_companions, NULL, + NULL); + if (ACPI_SUCCESS(status) || acpi_force_hot_remove) + status = acpi_bus_offline_companions(handle, 0, NULL, NULL); + + if (ACPI_FAILURE(status) && !acpi_force_hot_remove) { + acpi_bus_online_companions(handle, 0, NULL, NULL); + acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, + acpi_bus_online_companions, NULL, NULL, + NULL); + + unlock_device_hotplug(); + + put_device(&device->dev); + return -EBUSY; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Hot-removing device %s...\n", dev_name(&device->dev))); acpi_bus_trim(device); + + unlock_device_hotplug(); + /* Device node has been unregistered. */ put_device(&device->dev); device = NULL; @@ -236,6 +318,7 @@ static void acpi_scan_bus_device_check(acpi_handle handle, u32 ost_source) int error; mutex_lock(&acpi_scan_lock); + lock_device_hotplug(); acpi_bus_get_device(handle, &device); if (device) { @@ -259,6 +342,7 @@ static void acpi_scan_bus_device_check(acpi_handle handle, u32 ost_source) kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); out: + unlock_device_hotplug(); acpi_evaluate_hotplug_ost(handle, ost_source, ost_code, NULL); mutex_unlock(&acpi_scan_lock); } diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index fcae5fa..5c5d162 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -780,6 +780,33 @@ void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug, pr_err(PREFIX "Unable to add hotplug profile '%s'\n", name); } +static ssize_t force_remove_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", !!acpi_force_hot_remove); +} + +static ssize_t force_remove_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t size) +{ + bool val; + int ret; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + lock_device_hotplug(); + acpi_force_hot_remove = val; + unlock_device_hotplug(); + return size; +} + +static const struct kobj_attribute force_remove_attr = + __ATTR(force_remove, S_IRUGO | S_IWUSR, force_remove_show, + force_remove_store); + int __init acpi_sysfs_init(void) { int result; @@ -789,6 +816,10 @@ int __init acpi_sysfs_init(void) return result; hotplug_kobj = kobject_create_and_add("hotplug", acpi_kobj); + result = sysfs_create_file(hotplug_kobj, &force_remove_attr.attr); + if (result) + return result; + result = sysfs_create_file(acpi_kobj, &pm_profile_attr.attr); return result; } diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d..4d5d3e7 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -286,6 +286,7 @@ struct acpi_device_physical_node { u8 node_id; struct list_head node; struct device *dev; + bool put_online:1; }; /* set maximum of physical nodes to 32 for expansibility */ -- cgit v0.10.2 From ac212b6980d8d5eda705864fc5a8ecddc6d6eacc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 May 2013 00:26:22 +0200 Subject: ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743b..93e49bd 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -34,6 +34,7 @@ acpi-$(CONFIG_ACPI_SLEEP) += proc.o acpi-y += bus.o glue.o acpi-y += scan.o acpi-y += resource.o +acpi-y += acpi_processor.o acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c new file mode 100644 index 0000000..587d2af --- /dev/null +++ b/drivers/acpi/acpi_processor.c @@ -0,0 +1,484 @@ +/* + * acpi_processor.c - ACPI processor enumeration support + * + * Copyright (C) 2001, 2002 Andy Grover + * Copyright (C) 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2004 Dominik Brodowski + * Copyright (C) 2004 Anil S Keshavamurthy + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include + +#include "internal.h" + +#define _COMPONENT ACPI_PROCESSOR_COMPONENT + +ACPI_MODULE_NAME("processor"); + +/* -------------------------------------------------------------------------- + Errata Handling + -------------------------------------------------------------------------- */ + +struct acpi_processor_errata errata __read_mostly; +EXPORT_SYMBOL_GPL(errata); + +static int acpi_processor_errata_piix4(struct pci_dev *dev) +{ + u8 value1 = 0; + u8 value2 = 0; + + + if (!dev) + return -EINVAL; + + /* + * Note that 'dev' references the PIIX4 ACPI Controller. + */ + + switch (dev->revision) { + case 0: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); + break; + case 1: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); + break; + case 2: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); + break; + case 3: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); + break; + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); + break; + } + + switch (dev->revision) { + + case 0: /* PIIX4 A-step */ + case 1: /* PIIX4 B-step */ + /* + * See specification changes #13 ("Manual Throttle Duty Cycle") + * and #14 ("Enabling and Disabling Manual Throttle"), plus + * erratum #5 ("STPCLK# Deassertion Time") from the January + * 2002 PIIX4 specification update. Applies to only older + * PIIX4 models. + */ + errata.piix4.throttle = 1; + + case 2: /* PIIX4E */ + case 3: /* PIIX4M */ + /* + * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA + * Livelock") from the January 2002 PIIX4 specification update. + * Applies to all PIIX4 models. + */ + + /* + * BM-IDE + * ------ + * Find the PIIX4 IDE Controller and get the Bus Master IDE + * Status register address. We'll use this later to read + * each IDE controller's DMA status to make sure we catch all + * DMA activity. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + errata.piix4.bmisx = pci_resource_start(dev, 4); + pci_dev_put(dev); + } + + /* + * Type-F DMA + * ---------- + * Find the PIIX4 ISA Controller and read the Motherboard + * DMA controller's status to see if Type-F (Fast) DMA mode + * is enabled (bit 7) on either channel. Note that we'll + * disable C3 support if this is enabled, as some legacy + * devices won't operate well if fast DMA is disabled. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_0, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + pci_read_config_byte(dev, 0x76, &value1); + pci_read_config_byte(dev, 0x77, &value2); + if ((value1 & 0x80) || (value2 & 0x80)) + errata.piix4.fdma = 1; + pci_dev_put(dev); + } + + break; + } + + if (errata.piix4.bmisx) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus master activity detection (BM-IDE) erratum enabled\n")); + if (errata.piix4.fdma) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Type-F DMA livelock erratum (C3 disabled)\n")); + + return 0; +} + +static int acpi_processor_errata(struct acpi_processor *pr) +{ + int result = 0; + struct pci_dev *dev = NULL; + + + if (!pr) + return -EINVAL; + + /* + * PIIX4 + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, + PCI_ANY_ID, NULL); + if (dev) { + result = acpi_processor_errata_piix4(dev); + pci_dev_put(dev); + } + + return result; +} + +/* -------------------------------------------------------------------------- + Initialization + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +static int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + unsigned long long sta; + acpi_status status; + int ret; + + status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) + return -ENODEV; + + ret = acpi_map_lsapic(pr->handle, &pr->id); + if (ret) + return ret; + + ret = arch_register_cpu(pr->id); + if (ret) { + acpi_unmap_lsapic(pr->id); + return ret; + } + + /* + * CPU got hot-added, but cpu_data is not initialized yet. Set a flag + * to delay cpu_idle/throttling initialization and do it when the CPU + * gets online for the first time. + */ + pr_info("CPU%d has been hot-added\n", pr->id); + pr->flags.need_hotplug_init = 1; + return 0; +} +#else +static inline int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + return -ENODEV; +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +static int acpi_processor_get_info(struct acpi_device *device) +{ + union acpi_object object = { 0 }; + struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_processor *pr = acpi_driver_data(device); + int cpu_index, device_declaration = 0; + acpi_status status = AE_OK; + static int cpu0_initialized; + + if (num_online_cpus() > 1) + errata.smp = TRUE; + + acpi_processor_errata(pr); + + /* + * Check to see if we have bus mastering arbitration control. This + * is required for proper C3 usage (to maintain cache coherency). + */ + if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { + pr->flags.bm_control = 1; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus mastering arbitration control present\n")); + } else + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "No bus mastering arbitration control\n")); + + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { + /* Declared with "Processor" statement; match ProcessorID */ + status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor object (0x%x)\n", + status); + return -ENODEV; + } + + /* + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ + pr->acpi_id = object.processor.proc_id; + } else { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ + unsigned long long value; + status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, + NULL, &value); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor _UID (0x%x)\n", + status); + return -ENODEV; + } + device_declaration = 1; + pr->acpi_id = value; + } + cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); + + /* Handle UP system running SMP kernel, with no LAPIC in MADT */ + if (!cpu0_initialized && (cpu_index == -1) && + (num_online_cpus() == 1)) { + cpu_index = 0; + } + + cpu0_initialized = 1; + + pr->id = cpu_index; + + /* + * Extra Processor objects may be enumerated on MP systems with + * less than the max # of CPUs. They should be ignored _iff + * they are physically not present. + */ + if (pr->id == -1) { + int ret = acpi_processor_hotadd_init(pr); + if (ret) + return ret; + } + /* + * On some boxes several processors use the same processor bus id. + * But they are located in different scope. For example: + * \_SB.SCK0.CPU0 + * \_SB.SCK1.CPU0 + * Rename the processor device bus id. And the new bus id will be + * generated as the following format: + * CPU+CPU ID. + */ + sprintf(acpi_device_bid(device), "CPU%X", pr->id); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, + pr->acpi_id)); + + if (!object.processor.pblk_address) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); + else if (object.processor.pblk_length != 6) + dev_err(&device->dev, "Invalid PBLK length [%d]\n", + object.processor.pblk_length); + else { + pr->throttling.address = object.processor.pblk_address; + pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; + pr->throttling.duty_width = acpi_gbl_FADT.duty_width; + + pr->pblk = object.processor.pblk_address; + + /* + * We don't care about error returns - we just try to mark + * these reserved so that nobody else is confused into thinking + * that this region might be unused.. + * + * (In particular, allocating the IO range for Cardbus) + */ + request_region(pr->throttling.address, 6, "ACPI CPU throttle"); + } + + /* + * If ACPI describes a slot number for this CPU, we can use it to + * ensure we get the right value in the "physical id" field + * of /proc/cpuinfo + */ + status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); + if (ACPI_SUCCESS(status)) + arch_fix_phys_package_id(pr->id, object.integer.value); + + return 0; +} + +/* + * Do not put anything in here which needs the core to be online. + * For example MSR access or setting up things which check for cpuinfo_x86 + * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. + * Such things have to be put in and set up by the processor driver's .probe(). + */ +static DEFINE_PER_CPU(void *, processor_device_array); + +static int __cpuinit acpi_processor_add(struct acpi_device *device, + const struct acpi_device_id *id) +{ + struct acpi_processor *pr; + struct device *dev; + int result = 0; + + pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); + if (!pr) + return -ENOMEM; + + if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free_pr; + } + + pr->handle = device->handle; + strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); + device->driver_data = pr; + + result = acpi_processor_get_info(device); + if (result) /* Processor is not physically present or unavailable */ + return 0; + +#ifdef CONFIG_SMP + if (pr->id >= setup_max_cpus && pr->id != 0) + return 0; +#endif + + BUG_ON(pr->id >= nr_cpu_ids); + + /* + * Buggy BIOS check. + * ACPI id of processors can be reported wrongly by the BIOS. + * Don't trust it blindly + */ + if (per_cpu(processor_device_array, pr->id) != NULL && + per_cpu(processor_device_array, pr->id) != device) { + dev_warn(&device->dev, + "BIOS reported wrong ACPI id %d for the processor\n", + pr->id); + /* Give up, but do not abort the namespace scan. */ + goto err; + } + /* + * processor_device_array is not cleared on errors to allow buggy BIOS + * checks. + */ + per_cpu(processor_device_array, pr->id) = device; + + dev = get_cpu_device(pr->id); + ACPI_HANDLE_SET(dev, pr->handle); + result = acpi_bind_one(dev, NULL); + if (result) + goto err; + + pr->dev = dev; + dev->offline = pr->flags.need_hotplug_init; + + /* Trigger the processor driver's .probe() if present. */ + if (device_attach(dev) >= 0) + return 1; + + dev_err(dev, "Processor driver could not be attached\n"); + acpi_unbind_one(dev); + + err: + free_cpumask_var(pr->throttling.shared_cpu_map); + device->driver_data = NULL; + err_free_pr: + kfree(pr); + return result; +} + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +/* -------------------------------------------------------------------------- + Removal + -------------------------------------------------------------------------- */ + +static void acpi_processor_remove(struct acpi_device *device) +{ + struct acpi_processor *pr; + + if (!device || !acpi_driver_data(device)) + return; + + pr = acpi_driver_data(device); + if (pr->id >= nr_cpu_ids) + goto out; + + /* + * The only reason why we ever get here is CPU hot-removal. The CPU is + * already offline and the ACPI device removal locking prevents it from + * being put back online at this point. + * + * Unbind the driver from the processor device and detach it from the + * ACPI companion object. + */ + device_release_driver(pr->dev); + acpi_unbind_one(pr->dev); + + /* Clean up. */ + per_cpu(processor_device_array, pr->id) = NULL; + try_offline_node(cpu_to_node(pr->id)); + + /* Remove the CPU. */ + get_online_cpus(); + arch_unregister_cpu(pr->id); + acpi_unmap_lsapic(pr->id); + put_online_cpus(); + + out: + free_cpumask_var(pr->throttling.shared_cpu_map); + kfree(pr); +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +/* + * The following ACPI IDs are known to be suitable for representing as + * processor devices. + */ +static const struct acpi_device_id processor_device_ids[] = { + + { ACPI_PROCESSOR_OBJECT_HID, }, + { ACPI_PROCESSOR_DEVICE_HID, }, + + { } +}; + +static struct acpi_scan_handler __refdata processor_handler = { + .ids = processor_device_ids, + .attach = acpi_processor_add, +#ifdef CONFIG_ACPI_HOTPLUG_CPU + .detach = acpi_processor_remove, +#endif + .hotplug = { + .enabled = true, + }, +}; + +void __init acpi_processor_init(void) +{ + acpi_scan_add_handler_with_hotplug(&processor_handler, "processor"); +} diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 40a84cc..9783f40 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -105,7 +105,7 @@ acpi_handle acpi_get_child(acpi_handle parent, u64 address) } EXPORT_SYMBOL(acpi_get_child); -static int acpi_bind_one(struct device *dev, acpi_handle handle) +int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; acpi_status status; @@ -188,8 +188,9 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) kfree(physical_node); goto err; } +EXPORT_SYMBOL_GPL(acpi_bind_one); -static int acpi_unbind_one(struct device *dev) +int acpi_unbind_one(struct device *dev) { struct acpi_device_physical_node *entry; struct acpi_device *acpi_dev; @@ -238,6 +239,7 @@ err: dev_err(dev, "Oops, 'acpi_handle' corrupt\n"); return -EINVAL; } +EXPORT_SYMBOL_GPL(acpi_unbind_one); static int acpi_platform_notify(struct device *dev) { diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 4548f0a..bf79259 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -33,6 +33,7 @@ static inline void acpi_pci_slot_init(void) { } void acpi_pci_root_init(void); void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); +void acpi_processor_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); void acpi_csrt_init(void); @@ -79,6 +80,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, int type, unsigned long long sta); void acpi_device_add_finalize(struct acpi_device *device); void acpi_free_pnp_ids(struct acpi_device_pnp *pnp); +int acpi_bind_one(struct device *dev, acpi_handle handle); +int acpi_unbind_one(struct device *dev); /* -------------------------------------------------------------------------- Power Resource diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index c266cdc..ac28f18 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -1,11 +1,13 @@ /* - * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $) + * processor_driver.c - ACPI Processor Driver * * Copyright (C) 2001, 2002 Andy Grover * Copyright (C) 2001, 2002 Paul Diefenbaugh * Copyright (C) 2004 Dominik Brodowski * Copyright (C) 2004 Anil S Keshavamurthy * - Added processor hotplug support + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -24,52 +26,29 @@ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * TBD: - * 1. Make # power states dynamic. - * 2. Support duty_cycle values that span bit 4. - * 3. Optimize by having scheduler determine business instead of - * having us try to calculate it here. - * 4. Need C1 timing -- must modify kernel (IRQ handler) to get this. */ #include #include #include -#include -#include -#include #include #include -#include -#include #include #include #include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include + #include +#include "internal.h" + #define PREFIX "ACPI: " -#define ACPI_PROCESSOR_CLASS "processor" -#define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" #define ACPI_PROCESSOR_FILE_THROTTLING "throttling" #define ACPI_PROCESSOR_FILE_LIMIT "limit" #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 -#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -81,12 +60,8 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Processor Driver"); MODULE_LICENSE("GPL"); -static int acpi_processor_add(struct acpi_device *device); -static int acpi_processor_remove(struct acpi_device *device); -static void acpi_processor_notify(struct acpi_device *device, u32 event); -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr); -static int acpi_processor_handle_eject(struct acpi_processor *pr); -static int acpi_processor_start(struct acpi_processor *pr); +static int acpi_processor_start(struct device *dev); +static int acpi_processor_stop(struct device *dev); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, @@ -95,295 +70,27 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static struct acpi_driver acpi_processor_driver = { +static struct device_driver acpi_processor_driver = { .name = "processor", - .class = ACPI_PROCESSOR_CLASS, - .ids = processor_device_ids, - .ops = { - .add = acpi_processor_add, - .remove = acpi_processor_remove, - .notify = acpi_processor_notify, - }, + .bus = &cpu_subsys, + .acpi_match_table = processor_device_ids, + .probe = acpi_processor_start, + .remove = acpi_processor_stop, }; -#define INSTALL_NOTIFY_HANDLER 1 -#define UNINSTALL_NOTIFY_HANDLER 2 - DEFINE_PER_CPU(struct acpi_processor *, processors); EXPORT_PER_CPU_SYMBOL(processors); -struct acpi_processor_errata errata __read_mostly; - -/* -------------------------------------------------------------------------- - Errata Handling - -------------------------------------------------------------------------- */ - -static int acpi_processor_errata_piix4(struct pci_dev *dev) +static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { - u8 value1 = 0; - u8 value2 = 0; - - - if (!dev) - return -EINVAL; - - /* - * Note that 'dev' references the PIIX4 ACPI Controller. - */ - - switch (dev->revision) { - case 0: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); - break; - case 1: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); - break; - case 2: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); - break; - case 3: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); - break; - } - - switch (dev->revision) { - - case 0: /* PIIX4 A-step */ - case 1: /* PIIX4 B-step */ - /* - * See specification changes #13 ("Manual Throttle Duty Cycle") - * and #14 ("Enabling and Disabling Manual Throttle"), plus - * erratum #5 ("STPCLK# Deassertion Time") from the January - * 2002 PIIX4 specification update. Applies to only older - * PIIX4 models. - */ - errata.piix4.throttle = 1; - - case 2: /* PIIX4E */ - case 3: /* PIIX4M */ - /* - * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA - * Livelock") from the January 2002 PIIX4 specification update. - * Applies to all PIIX4 models. - */ - - /* - * BM-IDE - * ------ - * Find the PIIX4 IDE Controller and get the Bus Master IDE - * Status register address. We'll use this later to read - * each IDE controller's DMA status to make sure we catch all - * DMA activity. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - errata.piix4.bmisx = pci_resource_start(dev, 4); - pci_dev_put(dev); - } - - /* - * Type-F DMA - * ---------- - * Find the PIIX4 ISA Controller and read the Motherboard - * DMA controller's status to see if Type-F (Fast) DMA mode - * is enabled (bit 7) on either channel. Note that we'll - * disable C3 support if this is enabled, as some legacy - * devices won't operate well if fast DMA is disabled. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_0, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_read_config_byte(dev, 0x76, &value1); - pci_read_config_byte(dev, 0x77, &value2); - if ((value1 & 0x80) || (value2 & 0x80)) - errata.piix4.fdma = 1; - pci_dev_put(dev); - } - - break; - } - - if (errata.piix4.bmisx) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus master activity detection (BM-IDE) erratum enabled\n")); - if (errata.piix4.fdma) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Type-F DMA livelock erratum (C3 disabled)\n")); - - return 0; -} - -static int acpi_processor_errata(struct acpi_processor *pr) -{ - int result = 0; - struct pci_dev *dev = NULL; - - - if (!pr) - return -EINVAL; - - /* - * PIIX4 - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, - PCI_ANY_ID, NULL); - if (dev) { - result = acpi_processor_errata_piix4(dev); - pci_dev_put(dev); - } - - return result; -} - -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ - -static int acpi_processor_get_info(struct acpi_device *device) -{ - acpi_status status = 0; - union acpi_object object = { 0 }; - struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_device *device = data; struct acpi_processor *pr; - int cpu_index, device_declaration = 0; - static int cpu0_initialized; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - if (num_online_cpus() > 1) - errata.smp = TRUE; - - acpi_processor_errata(pr); - - /* - * Check to see if we have bus mastering arbitration control. This - * is required for proper C3 usage (to maintain cache coherency). - */ - if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { - pr->flags.bm_control = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus mastering arbitration control present\n")); - } else - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "No bus mastering arbitration control\n")); - - if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { - /* Declared with "Processor" statement; match ProcessorID */ - status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor object (0x%x)\n", - status); - return -ENODEV; - } - - /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in - * arch/xxx/acpi.c - */ - pr->acpi_id = object.processor.proc_id; - } else { - /* - * Declared with "Device" statement; match _UID. - * Note that we don't handle string _UIDs yet. - */ - unsigned long long value; - status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, - NULL, &value); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor _UID (0x%x)\n", - status); - return -ENODEV; - } - device_declaration = 1; - pr->acpi_id = value; - } - cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); - - /* Handle UP system running SMP kernel, with no LAPIC in MADT */ - if (!cpu0_initialized && (cpu_index == -1) && - (num_online_cpus() == 1)) { - cpu_index = 0; - } - - cpu0_initialized = 1; - - pr->id = cpu_index; - - /* - * Extra Processor objects may be enumerated on MP systems with - * less than the max # of CPUs. They should be ignored _iff - * they are physically not present. - */ - if (pr->id == -1) { - if (ACPI_FAILURE(acpi_processor_hotadd_init(pr))) - return -ENODEV; - } - /* - * On some boxes several processors use the same processor bus id. - * But they are located in different scope. For example: - * \_SB.SCK0.CPU0 - * \_SB.SCK1.CPU0 - * Rename the processor device bus id. And the new bus id will be - * generated as the following format: - * CPU+CPU ID. - */ - sprintf(acpi_device_bid(device), "CPU%X", pr->id); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, - pr->acpi_id)); - - if (!object.processor.pblk_address) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); - else if (object.processor.pblk_length != 6) - dev_err(&device->dev, "Invalid PBLK length [%d]\n", - object.processor.pblk_length); - else { - pr->throttling.address = object.processor.pblk_address; - pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; - pr->throttling.duty_width = acpi_gbl_FADT.duty_width; - - pr->pblk = object.processor.pblk_address; - - /* - * We don't care about error returns - we just try to mark - * these reserved so that nobody else is confused into thinking - * that this region might be unused.. - * - * (In particular, allocating the IO range for Cardbus) - */ - request_region(pr->throttling.address, 6, "ACPI CPU throttle"); - } - - /* - * If ACPI describes a slot number for this CPU, we can use it - * ensure we get the right value in the "physical id" field - * of /proc/cpuinfo - */ - status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); - if (ACPI_SUCCESS(status)) - arch_fix_phys_package_id(pr->id, object.integer.value); - - return 0; -} - -static DEFINE_PER_CPU(void *, processor_device_array); - -static void acpi_processor_notify(struct acpi_device *device, u32 event) -{ - struct acpi_processor *pr = acpi_driver_data(device); int saved; + if (device->handle != handle) + return; + + pr = acpi_driver_data(device); if (!pr) return; @@ -420,55 +127,62 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event) return; } -static int acpi_cpu_soft_notify(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static __cpuinit int __acpi_processor_start(struct acpi_device *device); + +static int __cpuinit acpi_cpu_soft_notify(struct notifier_block *nfb, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; struct acpi_processor *pr = per_cpu(processors, cpu); + struct acpi_device *device; - if (action == CPU_ONLINE && pr) { - /* CPU got physically hotplugged and onlined the first time: - * Initialize missing things + if (!pr || acpi_bus_get_device(pr->handle, &device)) + return NOTIFY_DONE; + + if (action == CPU_ONLINE) { + /* + * CPU got physically hotplugged and onlined for the first time: + * Initialize missing things. */ if (pr->flags.need_hotplug_init) { + int ret; + pr_info("Will online and init hotplugged CPU: %d\n", pr->id); - WARN(acpi_processor_start(pr), "Failed to start CPU:" - " %d\n", pr->id); pr->flags.need_hotplug_init = 0; - /* Normal CPU soft online event */ + ret = __acpi_processor_start(device); + WARN(ret, "Failed to start CPU: %d\n", pr->id); } else { + /* Normal CPU soft online event. */ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } - } - if (action == CPU_DEAD && pr) { - /* invalidate the flag.throttling after one CPU is offline */ + } else if (action == CPU_DEAD) { + /* Invalidate flag.throttling after the CPU is offline. */ acpi_processor_reevaluate_tstate(pr, action); } return NOTIFY_OK; } -static struct notifier_block acpi_cpu_notifier = +static struct notifier_block __refdata acpi_cpu_notifier = { .notifier_call = acpi_cpu_soft_notify, }; -/* - * acpi_processor_start() is called by the cpu_hotplug_notifier func: - * acpi_cpu_soft_notify(). Getting it __cpuinit{data} is difficult, the - * root cause seem to be that acpi_processor_uninstall_hotplug_notify() - * is in the module_exit (__exit) func. Allowing acpi_processor_start() - * to not be in __cpuinit section, but being called from __cpuinit funcs - * via __ref looks like the right thing to do here. - */ -static __ref int acpi_processor_start(struct acpi_processor *pr) +static __cpuinit int __acpi_processor_start(struct acpi_device *device) { - struct acpi_device *device = per_cpu(processor_device_array, pr->id); + struct acpi_processor *pr = acpi_driver_data(device); + acpi_status status; int result = 0; + if (!pr) + return -ENODEV; + + if (pr->flags.need_hotplug_init) + return 0; + #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_load_module(pr); @@ -506,129 +220,48 @@ static __ref int acpi_processor_start(struct acpi_processor *pr) goto err_remove_sysfs_thermal; } - return 0; + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify, device); + if (ACPI_SUCCESS(status)) + return 0; -err_remove_sysfs_thermal: + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); -err_thermal_unregister: + err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); -err_power_exit: + err_power_exit: acpi_processor_power_exit(pr); - return result; } -/* - * Do not put anything in here which needs the core to be online. - * For example MSR access or setting up things which check for cpuinfo_x86 - * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. - * Such things have to be put in and set up above in acpi_processor_start() - */ -static int __cpuinit acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_start(struct device *dev) { - struct acpi_processor *pr = NULL; - int result = 0; - struct device *dev; - - pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); - if (!pr) - return -ENOMEM; + struct acpi_device *device; - if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - result = -ENOMEM; - goto err_free_pr; - } - - pr->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); - device->driver_data = pr; - - result = acpi_processor_get_info(device); - if (result) { - /* Processor is physically not present */ - return 0; - } - -#ifdef CONFIG_SMP - if (pr->id >= setup_max_cpus && pr->id != 0) - return 0; -#endif - - BUG_ON(pr->id >= nr_cpu_ids); - - /* - * Buggy BIOS check - * ACPI id of processors can be reported wrongly by the BIOS. - * Don't trust it blindly - */ - if (per_cpu(processor_device_array, pr->id) != NULL && - per_cpu(processor_device_array, pr->id) != device) { - dev_warn(&device->dev, - "BIOS reported wrong ACPI id %d for the processor\n", - pr->id); - result = -ENODEV; - goto err_free_cpumask; - } - per_cpu(processor_device_array, pr->id) = device; - - per_cpu(processors, pr->id) = pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return -ENODEV; - dev = get_cpu_device(pr->id); - if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { - result = -EFAULT; - goto err_clear_processor; - } - - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - - result = acpi_processor_start(pr); - if (result) - goto err_remove_sysfs; - - return 0; - -err_remove_sysfs: - sysfs_remove_link(&device->dev.kobj, "sysdev"); -err_clear_processor: - /* - * processor_device_array is not cleared to allow checks for buggy BIOS - */ - per_cpu(processors, pr->id) = NULL; -err_free_cpumask: - free_cpumask_var(pr->throttling.shared_cpu_map); -err_free_pr: - kfree(pr); - return result; + return __acpi_processor_start(device); } -static int acpi_processor_remove(struct acpi_device *device) +static int acpi_processor_stop(struct device *dev) { - struct acpi_processor *pr = NULL; + struct acpi_device *device; + struct acpi_processor *pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return 0; - if (!device || !acpi_driver_data(device)) - return -EINVAL; + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify); pr = acpi_driver_data(device); - - if (pr->id >= nr_cpu_ids) - goto free; - - if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) { - if (acpi_processor_handle_eject(pr)) - return -EINVAL; - } + if (!pr) + return 0; acpi_processor_power_exit(pr); - sysfs_remove_link(&device->dev.kobj, "sysdev"); - if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); @@ -637,331 +270,47 @@ static int acpi_processor_remove(struct acpi_device *device) } per_cpu(processors, pr->id) = NULL; - per_cpu(processor_device_array, pr->id) = NULL; - try_offline_node(cpu_to_node(pr->id)); - -free: - free_cpumask_var(pr->throttling.shared_cpu_map); - kfree(pr); - return 0; } -#ifdef CONFIG_ACPI_HOTPLUG_CPU -/**************************************************************************** - * Acpi processor hotplug support * - ****************************************************************************/ - -static int is_processor_present(acpi_handle handle) -{ - acpi_status status; - unsigned long long sta = 0; - - - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - - if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) - return 1; - - /* - * _STA is mandatory for a processor that supports hot plug - */ - if (status == AE_NOT_FOUND) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor does not support hot plug\n")); - else - ACPI_EXCEPTION((AE_INFO, status, - "Processor Device is not present")); - return 0; -} - -static void acpi_processor_hotplug_notify(acpi_handle handle, - u32 event, void *data) -{ - struct acpi_device *device = NULL; - struct acpi_eject_event *ej_event = NULL; - u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ - acpi_status status; - int result; - - acpi_scan_lock_acquire(); - - switch (event) { - case ACPI_NOTIFY_BUS_CHECK: - case ACPI_NOTIFY_DEVICE_CHECK: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor driver received %s event\n", - (event == ACPI_NOTIFY_BUS_CHECK) ? - "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK")); - - if (!is_processor_present(handle)) - break; - - if (!acpi_bus_get_device(handle, &device)) - break; - - result = acpi_bus_scan(handle); - if (result) { - acpi_handle_err(handle, "Unable to add the device\n"); - break; - } - result = acpi_bus_get_device(handle, &device); - if (result) { - acpi_handle_err(handle, "Missing device object\n"); - break; - } - ost_code = ACPI_OST_SC_SUCCESS; - break; - - case ACPI_NOTIFY_EJECT_REQUEST: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "received ACPI_NOTIFY_EJECT_REQUEST\n")); - - if (acpi_bus_get_device(handle, &device)) { - acpi_handle_err(handle, - "Device don't exist, dropping EJECT\n"); - break; - } - if (!acpi_driver_data(device)) { - acpi_handle_err(handle, - "Driver data is NULL, dropping EJECT\n"); - break; - } - - ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); - if (!ej_event) { - acpi_handle_err(handle, "No memory, dropping EJECT\n"); - break; - } - - get_device(&device->dev); - ej_event->device = device; - ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; - /* The eject is carried out asynchronously. */ - status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, - ej_event); - if (ACPI_FAILURE(status)) { - put_device(&device->dev); - kfree(ej_event); - break; - } - goto out; - - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - - /* non-hotplug event; possibly handled by other handler */ - goto out; - } - - /* Inform firmware that the hotplug operation has completed */ - (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); - - out: - acpi_scan_lock_release(); -} - -static acpi_status is_processor_device(acpi_handle handle) -{ - struct acpi_device_info *info; - char *hid; - acpi_status status; - - status = acpi_get_object_info(handle, &info); - if (ACPI_FAILURE(status)) - return status; - - if (info->type == ACPI_TYPE_PROCESSOR) { - kfree(info); - return AE_OK; /* found a processor object */ - } - - if (!(info->valid & ACPI_VALID_HID)) { - kfree(info); - return AE_ERROR; - } - - hid = info->hardware_id.string; - if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { - kfree(info); - return AE_ERROR; - } - - kfree(info); - return AE_OK; /* found a processor device object */ -} - -static acpi_status -processor_walk_namespace_cb(acpi_handle handle, - u32 lvl, void *context, void **rv) -{ - acpi_status status; - int *action = context; - - status = is_processor_device(handle); - if (ACPI_FAILURE(status)) - return AE_OK; /* not a processor; continue to walk */ - - switch (*action) { - case INSTALL_NOTIFY_HANDLER: - acpi_install_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify, - NULL); - break; - case UNINSTALL_NOTIFY_HANDLER: - acpi_remove_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify); - break; - default: - break; - } - - /* found a processor; skip walking underneath */ - return AE_CTRL_DEPTH; -} - -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - acpi_handle handle = pr->handle; - - if (!is_processor_present(handle)) { - return AE_ERROR; - } - - if (acpi_map_lsapic(handle, &pr->id)) - return AE_ERROR; - - if (arch_register_cpu(pr->id)) { - acpi_unmap_lsapic(pr->id); - return AE_ERROR; - } - - /* CPU got hot-plugged, but cpu_data is not initialized yet - * Set flag to delay cpu_idle/throttling initialization - * in: - * acpi_processor_add() - * acpi_processor_get_info() - * and do it when the CPU gets online the first time - * TBD: Cleanup above functions and try to do this more elegant. - */ - pr_info("CPU %d got hotplugged\n", pr->id); - pr->flags.need_hotplug_init = 1; - - return AE_OK; -} - -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - if (cpu_online(pr->id)) - cpu_down(pr->id); - - get_online_cpus(); - /* - * The cpu might become online again at this point. So we check whether - * the cpu has been onlined or not. If the cpu became online, it means - * that someone wants to use the cpu. So acpi_processor_handle_eject() - * returns -EAGAIN. - */ - if (unlikely(cpu_online(pr->id))) { - put_online_cpus(); - pr_warn("Failed to remove CPU %d, because other task " - "brought the CPU back online\n", pr->id); - return -EAGAIN; - } - arch_unregister_cpu(pr->id); - acpi_unmap_lsapic(pr->id); - put_online_cpus(); - return (0); -} -#else -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - return AE_ERROR; -} -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - return (-EINVAL); -} -#endif - -static -void acpi_processor_install_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - register_hotcpu_notifier(&acpi_cpu_notifier); -} - -static -void acpi_processor_uninstall_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - unregister_hotcpu_notifier(&acpi_cpu_notifier); -} - /* * We keep the driver loaded even when ACPI is not running. * This is needed for the powernow-k8 driver, that works even without * ACPI, but needs symbols from this driver */ -static int __init acpi_processor_init(void) +static int __init acpi_processor_driver_init(void) { int result = 0; if (acpi_disabled) return 0; - result = acpi_bus_register_driver(&acpi_processor_driver); + result = driver_register(&acpi_processor_driver); if (result < 0) return result; acpi_processor_syscore_init(); - - acpi_processor_install_hotplug_notify(); - + register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); - acpi_processor_ppc_init(); - acpi_processor_throttling_init(); - return 0; } -static void __exit acpi_processor_exit(void) +static void __exit acpi_processor_driver_exit(void) { if (acpi_disabled) return; acpi_processor_ppc_exit(); - acpi_thermal_cpufreq_exit(); - - acpi_processor_uninstall_hotplug_notify(); - + unregister_hotcpu_notifier(&acpi_cpu_notifier); acpi_processor_syscore_exit(); - - acpi_bus_unregister_driver(&acpi_processor_driver); - - return; + driver_unregister(&acpi_processor_driver); } -module_init(acpi_processor_init); -module_exit(acpi_processor_exit); +module_init(acpi_processor_driver_init); +module_exit(acpi_processor_driver_exit); MODULE_ALIAS("processor"); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 4fd3920..ad82bb2 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2124,6 +2124,7 @@ int __init acpi_scan_init(void) acpi_pci_root_init(); acpi_pci_link_init(); + acpi_processor_init(); acpi_platform_init(); acpi_lpss_init(); acpi_csrt_init(); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 25c8768..7431ba6 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -13,11 +13,21 @@ #include #include #include +#include #include "base.h" static DEFINE_PER_CPU(struct device *, cpu_sys_devices); +static int cpu_subsys_match(struct device *dev, struct device_driver *drv) +{ + /* ACPI style match is the only one that may succeed. */ + if (acpi_driver_match_device(dev, drv)) + return 1; + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void change_cpu_under_node(struct cpu *cpu, unsigned int from_nid, unsigned int to_nid) @@ -98,6 +108,7 @@ static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); struct bus_type cpu_subsys = { .name = "cpu", .dev_name = "cpu", + .match = cpu_subsys_match, #ifdef CONFIG_HOTPLUG_CPU .online = cpu_subsys_online, .offline = cpu_subsys_offline, diff --git a/include/acpi/processor.h b/include/acpi/processor.h index ea69367..66096d0 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -6,6 +6,10 @@ #include #include +#define ACPI_PROCESSOR_CLASS "processor" +#define ACPI_PROCESSOR_DEVICE_NAME "Processor" +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" + #define ACPI_PROCESSOR_BUSY_METRIC 10 #define ACPI_PROCESSOR_MAX_POWER 8 @@ -207,6 +211,7 @@ struct acpi_processor { struct acpi_processor_throttling throttling; struct acpi_processor_limit limit; struct thermal_cooling_device *cdev; + struct device *dev; /* Processor device. */ }; struct acpi_processor_errata { -- cgit v0.10.2 From e2ff39400d81233374e780b133496a2296643d7d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 00:29:49 +0200 Subject: ACPI / memhotplug: Bind removable memory blocks to ACPI device nodes During ACPI memory hotplug configuration bind memory blocks residing in modules removable through the standard ACPI mechanism to struct acpi_device objects associated with ACPI namespace objects representing those modules. Accordingly, unbind those memory blocks from the struct acpi_device objects when the memory modules in question are being removed. When "offline" operation for devices representing memory blocks is introduced, this will allow the ACPI core's device hot-remove code to use it to carry out remove_memory() for those memory blocks and check the results of that before it actually removes the modules holding them from the system. Since walk_memory_range() is used for accessing all memory blocks corresponding to a given ACPI namespace object, it is exported from memory_hotplug.c so that the code in acpi_memhotplug.c can use it. Signed-off-by: Rafael J. Wysocki Tested-by: Vasilis Liaskovitis Reviewed-by: Toshi Kani diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 5e6301e..5590db1 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -28,6 +28,7 @@ */ #include +#include #include #include "internal.h" @@ -166,13 +167,50 @@ static int acpi_memory_check_device(struct acpi_memory_device *mem_device) return 0; } +static unsigned long acpi_meminfo_start_pfn(struct acpi_memory_info *info) +{ + return PFN_DOWN(info->start_addr); +} + +static unsigned long acpi_meminfo_end_pfn(struct acpi_memory_info *info) +{ + return PFN_UP(info->start_addr + info->length-1); +} + +static int acpi_bind_memblk(struct memory_block *mem, void *arg) +{ + return acpi_bind_one(&mem->dev, (acpi_handle)arg); +} + +static int acpi_bind_memory_blocks(struct acpi_memory_info *info, + acpi_handle handle) +{ + return walk_memory_range(acpi_meminfo_start_pfn(info), + acpi_meminfo_end_pfn(info), (void *)handle, + acpi_bind_memblk); +} + +static int acpi_unbind_memblk(struct memory_block *mem, void *arg) +{ + acpi_unbind_one(&mem->dev); + return 0; +} + +static void acpi_unbind_memory_blocks(struct acpi_memory_info *info, + acpi_handle handle) +{ + walk_memory_range(acpi_meminfo_start_pfn(info), + acpi_meminfo_end_pfn(info), NULL, acpi_unbind_memblk); +} + static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) { + acpi_handle handle = mem_device->device->handle; int result, num_enabled = 0; struct acpi_memory_info *info; int node; - node = acpi_get_node(mem_device->device->handle); + node = acpi_get_node(handle); /* * Tell the VM there is more memory here... * Note: Assume that this function returns zero on success @@ -203,6 +241,12 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) if (result && result != -EEXIST) continue; + result = acpi_bind_memory_blocks(info, handle); + if (result) { + acpi_unbind_memory_blocks(info, handle); + return -ENODEV; + } + info->enabled = 1; /* @@ -229,10 +273,11 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) { + acpi_handle handle = mem_device->device->handle; int result = 0, nid; struct acpi_memory_info *info, *n; - nid = acpi_get_node(mem_device->device->handle); + nid = acpi_get_node(handle); list_for_each_entry_safe(info, n, &mem_device->res_list, list) { if (!info->enabled) @@ -240,6 +285,8 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) if (nid < 0) nid = memory_add_physaddr_to_nid(info->start_addr); + + acpi_unbind_memory_blocks(info, handle); result = remove_memory(nid, info->start_addr, info->length); if (result) return result; @@ -300,7 +347,7 @@ static int acpi_memory_device_add(struct acpi_device *device, if (result) { dev_err(&device->dev, "acpi_memory_enable_device() error\n"); acpi_memory_device_free(mem_device); - return -ENODEV; + return result; } dev_dbg(&device->dev, "Memory device configured by ACPI\n"); diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 3e622c6..2975b7b 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -245,6 +245,8 @@ static inline int is_mem_section_removable(unsigned long pfn, static inline void try_offline_node(int nid) {} #endif /* CONFIG_MEMORY_HOTREMOVE */ +extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, + void *arg, int (*func)(struct memory_block *, void *)); extern int mem_online_node(int nid); extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index a221fac..5ea1287 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1618,6 +1618,7 @@ int offline_pages(unsigned long start_pfn, unsigned long nr_pages) { return __offline_pages(start_pfn, start_pfn + nr_pages, 120 * HZ); } +#endif /* CONFIG_MEMORY_HOTREMOVE */ /** * walk_memory_range - walks through all mem sections in [start_pfn, end_pfn) @@ -1631,7 +1632,7 @@ int offline_pages(unsigned long start_pfn, unsigned long nr_pages) * * Returns the return value of func. */ -static int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, +int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, void *arg, int (*func)(struct memory_block *, void *)) { struct memory_block *mem = NULL; @@ -1668,6 +1669,7 @@ static int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, return 0; } +#ifdef CONFIG_MEMORY_HOTREMOVE /** * offline_memory_block_cb - callback function for offlining memory block * @mem: the memory block to be offlined -- cgit v0.10.2 From 4960e05e22604ee270a023f968e0e4f9bd0c6fef Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 14:18:37 +0200 Subject: Driver core: Introduce offline/online callbacks for memory blocks Introduce .offline() and .online() callbacks for memory_subsys that will allow the generic device_offline() and device_online() to be used with device objects representing memory blocks. That, in turn, allows the ACPI subsystem to use device_offline() to put removable memory blocks offline, if possible, before removing memory modules holding them. The 'online' sysfs attribute of memory block devices will attempt to put them offline if 0 is written to it and will attempt to apply the previously used online type when onlining them (i.e. when 1 is written to it). Signed-off-by: Rafael J. Wysocki Tested-by: Vasilis Liaskovitis Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 14f8a69..c8f3b63 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -37,9 +37,14 @@ static inline int base_memory_block_id(int section_nr) return section_nr / sections_per_block; } +static int memory_subsys_online(struct device *dev); +static int memory_subsys_offline(struct device *dev); + static struct bus_type memory_subsys = { .name = MEMORY_CLASS_NAME, .dev_name = MEMORY_CLASS_NAME, + .online = memory_subsys_online, + .offline = memory_subsys_offline, }; static BLOCKING_NOTIFIER_HEAD(memory_chain); @@ -88,6 +93,7 @@ int register_memory(struct memory_block *memory) memory->dev.bus = &memory_subsys; memory->dev.id = memory->start_section_nr / sections_per_block; memory->dev.release = memory_block_release; + memory->dev.offline = memory->state == MEM_OFFLINE; error = device_register(&memory->dev); return error; @@ -278,33 +284,70 @@ static int __memory_block_change_state(struct memory_block *mem, { int ret = 0; - if (mem->state != from_state_req) { - ret = -EINVAL; - goto out; - } + if (mem->state != from_state_req) + return -EINVAL; if (to_state == MEM_OFFLINE) mem->state = MEM_GOING_OFFLINE; ret = memory_block_action(mem->start_section_nr, to_state, online_type); - if (ret) { mem->state = from_state_req; - goto out; + } else { + mem->state = to_state; + if (to_state == MEM_ONLINE) + mem->last_online = online_type; } + return ret; +} - mem->state = to_state; - switch (mem->state) { - case MEM_OFFLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); - break; - case MEM_ONLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); - break; - default: - break; +static int memory_subsys_online(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; + + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_ONLINE ? 0 : + __memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, + mem->last_online); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int memory_subsys_offline(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; + + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_OFFLINE ? 0 : + __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int __memory_block_change_state_uevent(struct memory_block *mem, + unsigned long to_state, unsigned long from_state_req, + int online_type) +{ + int ret = __memory_block_change_state(mem, to_state, from_state_req, + online_type); + if (!ret) { + switch (mem->state) { + case MEM_OFFLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); + break; + case MEM_ONLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); + break; + default: + break; + } } -out: return ret; } @@ -315,8 +358,8 @@ static int memory_block_change_state(struct memory_block *mem, int ret; mutex_lock(&mem->state_mutex); - ret = __memory_block_change_state(mem, to_state, from_state_req, - online_type); + ret = __memory_block_change_state_uevent(mem, to_state, from_state_req, + online_type); mutex_unlock(&mem->state_mutex); return ret; @@ -326,22 +369,34 @@ store_mem_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct memory_block *mem; + bool offline; int ret = -EINVAL; mem = container_of(dev, struct memory_block, dev); - if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) + lock_device_hotplug(); + + if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KERNEL); - else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) + } else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_MOVABLE); - else if (!strncmp(buf, "online", min_t(int, count, 6))) + } else if (!strncmp(buf, "online", min_t(int, count, 6))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KEEP); - else if(!strncmp(buf, "offline", min_t(int, count, 7))) + } else if(!strncmp(buf, "offline", min_t(int, count, 7))) { + offline = true; ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + } + if (!ret) + dev->offline = offline; + + unlock_device_hotplug(); if (ret) return ret; @@ -563,6 +618,7 @@ static int init_memory_block(struct memory_block **memory, base_memory_block_id(scn_nr) * sections_per_block; mem->end_section_nr = mem->start_section_nr + sections_per_block - 1; mem->state = state; + mem->last_online = ONLINE_KEEP; mem->section_count++; mutex_init(&mem->state_mutex); start_pfn = section_nr_to_pfn(mem->start_section_nr); @@ -681,14 +737,20 @@ int unregister_memory_section(struct mem_section *section) /* * offline one memory block. If the memory block has been offlined, do nothing. + * + * Call under device_hotplug_lock. */ int offline_memory_block(struct memory_block *mem) { int ret = 0; mutex_lock(&mem->state_mutex); - if (mem->state != MEM_OFFLINE) - ret = __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + if (mem->state != MEM_OFFLINE) { + ret = __memory_block_change_state_uevent(mem, MEM_OFFLINE, + MEM_ONLINE, -1); + if (!ret) + mem->dev.offline = true; + } mutex_unlock(&mem->state_mutex); return ret; diff --git a/include/linux/memory.h b/include/linux/memory.h index 85c31a8..3d53465 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -26,6 +26,7 @@ struct memory_block { unsigned long start_section_nr; unsigned long end_section_nr; unsigned long state; + int last_online; int section_count; /* -- cgit v0.10.2 From 416ad3c9c0066405b83ec875b75496523549be09 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:06 +0000 Subject: freezer: add unsafe versions of freezable helpers for NFS NFS calls the freezable helpers with locks held, which is unsafe and will cause lockdep warnings when 6aa9707 "lockdep: check that no locks held at freeze time" is reapplied (it was reverted in dbf520a). NFS shouldn't be doing this, but it has long-running syscalls that must hold a lock but also shouldn't block suspend. Until NFS freeze handling is rewritten to use a signal to exit out of the critical section, add new *_unsafe versions of the helpers that will not run the lockdep test when 6aa9707 is reapplied, and call them from NFS. In practice the likley result of holding the lock while freezing is that a second task blocked on the lock will never freeze, aborting suspend, but it is possible to manufacture a case using the cgroup freezer, the lock, and the suspend freezer to create a deadlock. Silencing the lockdep warning here will allow problems to be found in other drivers that may have a more serious deadlock risk, and prevent new problems from being added. Signed-off-by: Colin Cross Acked-by: Pavel Machek Acked-by: Tejun Heo Signed-off-by: Rafael J. Wysocki diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index c1c7a9d..ce72704 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -79,7 +79,7 @@ int nfs_wait_bit_killable(void *word) { if (fatal_signal_pending(current)) return -ERESTARTSYS; - freezable_schedule(); + freezable_schedule_unsafe(); return 0; } EXPORT_SYMBOL_GPL(nfs_wait_bit_killable); diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 43ea96c..ce90eb4 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -33,7 +33,7 @@ nfs3_rpc_wrapper(struct rpc_clnt *clnt, struct rpc_message *msg, int flags) res = rpc_call_sync(clnt, msg, flags); if (res != -EJUKEBOX) break; - freezable_schedule_timeout_killable(NFS_JUKEBOX_RETRY_TIME); + freezable_schedule_timeout_killable_unsafe(NFS_JUKEBOX_RETRY_TIME); res = -ERESTARTSYS; } while (!fatal_signal_pending(current)); return res; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8fbc100..9b18af1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -268,7 +268,7 @@ static int nfs4_delay(struct rpc_clnt *clnt, long *timeout) *timeout = NFS4_POLL_RETRY_MIN; if (*timeout > NFS4_POLL_RETRY_MAX) *timeout = NFS4_POLL_RETRY_MAX; - freezable_schedule_timeout_killable(*timeout); + freezable_schedule_timeout_killable_unsafe(*timeout); if (fatal_signal_pending(current)) res = -ERESTARTSYS; *timeout <<= 1; @@ -4528,7 +4528,7 @@ int nfs4_proc_delegreturn(struct inode *inode, struct rpc_cred *cred, const nfs4 static unsigned long nfs4_set_lock_task_retry(unsigned long timeout) { - freezable_schedule_timeout_killable(timeout); + freezable_schedule_timeout_killable_unsafe(timeout); timeout <<= 1; if (timeout > NFS4_LOCK_MAXTIMEOUT) return NFS4_LOCK_MAXTIMEOUT; diff --git a/include/linux/freezer.h b/include/linux/freezer.h index e70df40..5b31e21c 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -46,7 +46,11 @@ extern int freeze_kernel_threads(void); extern void thaw_processes(void); extern void thaw_kernel_threads(void); -static inline bool try_to_freeze(void) +/* + * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION + * If try_to_freeze causes a lockdep warning it means the caller may deadlock + */ +static inline bool try_to_freeze_unsafe(void) { might_sleep(); if (likely(!freezing(current))) @@ -54,6 +58,11 @@ static inline bool try_to_freeze(void) return __refrigerator(false); } +static inline bool try_to_freeze(void) +{ + return try_to_freeze_unsafe(); +} + extern bool freeze_task(struct task_struct *p); extern bool set_freezable(void); @@ -115,6 +124,14 @@ static inline void freezer_count(void) try_to_freeze(); } +/* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ +static inline void freezer_count_unsafe(void) +{ + current->flags &= ~PF_FREEZER_SKIP; + smp_mb(); + try_to_freeze_unsafe(); +} + /** * freezer_should_skip - whether to skip a task when determining frozen * state is reached @@ -152,6 +169,14 @@ static inline bool freezer_should_skip(struct task_struct *p) freezer_count(); \ }) +/* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ +#define freezable_schedule_unsafe() \ +({ \ + freezer_do_not_count(); \ + schedule(); \ + freezer_count_unsafe(); \ +}) + /* Like schedule_timeout_killable(), but should not block the freezer. */ #define freezable_schedule_timeout_killable(timeout) \ ({ \ @@ -162,6 +187,16 @@ static inline bool freezer_should_skip(struct task_struct *p) __retval; \ }) +/* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ +#define freezable_schedule_timeout_killable_unsafe(timeout) \ +({ \ + long __retval; \ + freezer_do_not_count(); \ + __retval = schedule_timeout_killable(timeout); \ + freezer_count_unsafe(); \ + __retval; \ +}) + /* * Freezer-friendly wrappers around wait_event_interruptible(), * wait_event_killable() and wait_event_interruptible_timeout(), originally @@ -225,9 +260,14 @@ static inline void set_freezable(void) {} #define freezable_schedule() schedule() +#define freezable_schedule_unsafe() schedule() + #define freezable_schedule_timeout_killable(timeout) \ schedule_timeout_killable(timeout) +#define freezable_schedule_timeout_killable_unsafe(timeout) \ + schedule_timeout_killable(timeout) + #define wait_event_freezable(wq, condition) \ wait_event_interruptible(wq, condition) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index f8529fc..8dcfadc 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -254,7 +254,7 @@ static int rpc_wait_bit_killable(void *word) { if (fatal_signal_pending(current)) return -ERESTARTSYS; - freezable_schedule(); + freezable_schedule_unsafe(); return 0; } -- cgit v0.10.2 From 5853cc2a89f726e21d51ca0fd75757a03126a84b Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Tue, 7 May 2013 17:52:05 +0000 Subject: freezer: add unsafe versions of freezable helpers for CIFS CIFS calls wait_event_freezekillable_unsafe with a VFS lock held, which is unsafe and will cause lockdep warnings when 6aa9707 "lockdep: check that no locks held at freeze time" is reapplied (it was reverted in dbf520a). CIFS shouldn't be doing this, but it has long-running syscalls that must hold a lock but also shouldn't block suspend. Until CIFS freeze handling is rewritten to use a signal to exit out of the critical section, add a new wait_event_freezekillable_unsafe helper that will not run the lockdep test when 6aa9707 is reapplied, and call it from CIFS. In practice the likley result of holding the lock while freezing is that a second task blocked on the lock will never freeze, aborting suspend, but it is possible to manufacture a case using the cgroup freezer, the lock, and the suspend freezer to create a deadlock. Silencing the lockdep warning here will allow problems to be found in other drivers that may have a more serious deadlock risk, and prevent new problems from being added. Acked-by: Pavel Machek Acked-by: Tejun Heo Reviewed-by: Jeff Layton Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index bfbf470..b70aa7c 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -447,7 +447,7 @@ wait_for_response(struct TCP_Server_Info *server, struct mid_q_entry *midQ) { int error; - error = wait_event_freezekillable(server->response_q, + error = wait_event_freezekillable_unsafe(server->response_q, midQ->mid_state != MID_REQUEST_SUBMITTED); if (error < 0) return -ERESTARTSYS; diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 5b31e21c..d3c038e 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -212,6 +212,16 @@ static inline bool freezer_should_skip(struct task_struct *p) __retval; \ }) +/* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ +#define wait_event_freezekillable_unsafe(wq, condition) \ +({ \ + int __retval; \ + freezer_do_not_count(); \ + __retval = wait_event_killable(wq, (condition)); \ + freezer_count_unsafe(); \ + __retval; \ +}) + #define wait_event_freezable(wq, condition) \ ({ \ int __retval; \ @@ -277,6 +287,9 @@ static inline void set_freezable(void) {} #define wait_event_freezekillable(wq, condition) \ wait_event_killable(wq, condition) +#define wait_event_freezekillable_unsafe(wq, condition) \ + wait_event_killable(wq, condition) + #endif /* !CONFIG_FREEZER */ #endif /* FREEZER_H_INCLUDED */ -- cgit v0.10.2 From 1b1d2fb4444231f25ddabc598aa2b5a9c0833fba Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:08 +0000 Subject: lockdep: remove task argument from debug_check_no_locks_held The only existing caller to debug_check_no_locks_held calls it with 'current' as the task, and the freezer needs to call debug_check_no_locks_held but doesn't already have a current task pointer, so remove the argument. It is already assuming that the current task is relevant by dumping the current stack trace as part of the warning. This was originally part of 6aa9707099c (lockdep: check that no locks held at freeze time) which was reverted in dbf520a9d7d4. Original-author: Mandeep Singh Baines Acked-by: Pavel Machek Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 21ca773..822c135 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -51,7 +51,7 @@ struct task_struct; extern void debug_show_all_locks(void); extern void debug_show_held_locks(struct task_struct *task); extern void debug_check_no_locks_freed(const void *from, unsigned long len); -extern void debug_check_no_locks_held(struct task_struct *task); +extern void debug_check_no_locks_held(void); #else static inline void debug_show_all_locks(void) { @@ -67,7 +67,7 @@ debug_check_no_locks_freed(const void *from, unsigned long len) } static inline void -debug_check_no_locks_held(struct task_struct *task) +debug_check_no_locks_held(void) { } #endif diff --git a/kernel/exit.c b/kernel/exit.c index af2eb3c..e597562 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -835,7 +835,7 @@ void do_exit(long code) /* * Make sure we are holding no locks: */ - debug_check_no_locks_held(tsk); + debug_check_no_locks_held(); /* * We can do this unlocked here. The futex code uses this flag * just to verify whether the pi state cleanup has been done diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 1f3186b..e16c45b 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -4090,7 +4090,7 @@ void debug_check_no_locks_freed(const void *mem_from, unsigned long mem_len) } EXPORT_SYMBOL_GPL(debug_check_no_locks_freed); -static void print_held_locks_bug(struct task_struct *curr) +static void print_held_locks_bug(void) { if (!debug_locks_off()) return; @@ -4099,22 +4099,21 @@ static void print_held_locks_bug(struct task_struct *curr) printk("\n"); printk("=====================================\n"); - printk("[ BUG: lock held at task exit time! ]\n"); + printk("[ BUG: %s/%d still has locks held! ]\n", + current->comm, task_pid_nr(current)); print_kernel_ident(); printk("-------------------------------------\n"); - printk("%s/%d is exiting with locks still held!\n", - curr->comm, task_pid_nr(curr)); - lockdep_print_held_locks(curr); - + lockdep_print_held_locks(current); printk("\nstack backtrace:\n"); dump_stack(); } -void debug_check_no_locks_held(struct task_struct *task) +void debug_check_no_locks_held(void) { - if (unlikely(task->lockdep_depth > 0)) - print_held_locks_bug(task); + if (unlikely(current->lockdep_depth > 0)) + print_held_locks_bug(); } +EXPORT_SYMBOL_GPL(debug_check_no_locks_held); void debug_show_all_locks(void) { -- cgit v0.10.2 From 0f9548ca10916dec166eaf74c816bded7d8e611d Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Mon, 6 May 2013 23:50:09 +0000 Subject: lockdep: check that no locks held at freeze time We shouldn't try_to_freeze if locks are held. Holding a lock can cause a deadlock if the lock is later acquired in the suspend or hibernate path (e.g. by dpm). Holding a lock can also cause a deadlock in the case of cgroup_freezer if a lock is held inside a frozen cgroup that is later acquired by a process outside that group. History: This patch was originally applied as 6aa9707099c and reverted in dbf520a9d7d4 because NFS was freezing with locks held. It was deemed better to keep the bad freeze point in NFS to allow laptops to suspend consistently. The previous patch in this series converts NFS to call _unsafe versions of the freezable helpers so that lockdep doesn't complain about them until a more correct fix can be applied. [akpm@linux-foundation.org: export debug_check_no_locks_held] Signed-off-by: Mandeep Singh Baines Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Acked-by: Pavel Machek Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/freezer.h b/include/linux/freezer.h index d3c038e..bcf9e65 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -3,6 +3,7 @@ #ifndef FREEZER_H_INCLUDED #define FREEZER_H_INCLUDED +#include #include #include #include @@ -60,6 +61,8 @@ static inline bool try_to_freeze_unsafe(void) static inline bool try_to_freeze(void) { + if (!(current->flags & PF_NOFREEZE)) + debug_check_no_locks_held(); return try_to_freeze_unsafe(); } -- cgit v0.10.2 From 18ad0c6297df1d671ecea83b608cd9e432642a05 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:10 +0000 Subject: freezer: shorten freezer sleep time using exponential backoff All tasks can easily be frozen in under 10 ms, switch to using an initial 1 ms sleep followed by exponential backoff until 8 ms. Also convert the printed time to ms instead of centiseconds. Acked-by: Pavel Machek Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/process.c b/kernel/power/process.c index 98088e0..fc0df84 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -30,9 +30,10 @@ static int try_to_freeze_tasks(bool user_only) unsigned int todo; bool wq_busy = false; struct timeval start, end; - u64 elapsed_csecs64; - unsigned int elapsed_csecs; + u64 elapsed_msecs64; + unsigned int elapsed_msecs; bool wakeup = false; + int sleep_usecs = USEC_PER_MSEC; do_gettimeofday(&start); @@ -68,22 +69,25 @@ static int try_to_freeze_tasks(bool user_only) /* * We need to retry, but first give the freezing tasks some - * time to enter the refrigerator. + * time to enter the refrigerator. Start with an initial + * 1 ms sleep followed by exponential backoff until 8 ms. */ - msleep(10); + usleep_range(sleep_usecs / 2, sleep_usecs); + if (sleep_usecs < 8 * USEC_PER_MSEC) + sleep_usecs *= 2; } do_gettimeofday(&end); - elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); - do_div(elapsed_csecs64, NSEC_PER_SEC / 100); - elapsed_csecs = elapsed_csecs64; + elapsed_msecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); + do_div(elapsed_msecs64, NSEC_PER_MSEC); + elapsed_msecs = elapsed_msecs64; if (todo) { printk("\n"); - printk(KERN_ERR "Freezing of tasks %s after %d.%02d seconds " + printk(KERN_ERR "Freezing of tasks %s after %d.%03d seconds " "(%d tasks refusing to freeze, wq_busy=%d):\n", wakeup ? "aborted" : "failed", - elapsed_csecs / 100, elapsed_csecs % 100, + elapsed_msecs / 1000, elapsed_msecs % 1000, todo - wq_busy, wq_busy); if (!wakeup) { @@ -96,8 +100,8 @@ static int try_to_freeze_tasks(bool user_only) read_unlock(&tasklist_lock); } } else { - printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, - elapsed_csecs % 100); + printk("(elapsed %d.%03d seconds) ", elapsed_msecs / 1000, + elapsed_msecs % 1000); } return todo ? -EBUSY : 0; -- cgit v0.10.2 From 613f5d13b569859171f0896fbc73ee0bfa811fda Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:11 +0000 Subject: freezer: skip waking up tasks with PF_FREEZER_SKIP set Android goes through suspend/resume very often (every few seconds when on a busy wifi network with the screen off), and a significant portion of the energy used to go in and out of suspend is spent in the freezer. If a task has called freezer_do_not_count(), don't bother waking it up. If it happens to wake up later it will call freezer_count() and immediately enter the refrigerator. Combined with patches to convert freezable helpers to use freezer_do_not_count() and convert common sites where idle userspace tasks are blocked to use the freezable helpers, this reduces the time and energy required to suspend and resume. Acked-by: Tejun Heo Acked-by: Pavel Machek Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/kernel/freezer.c b/kernel/freezer.c index c38893b..8b2afc1 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -110,6 +110,18 @@ bool freeze_task(struct task_struct *p) { unsigned long flags; + /* + * This check can race with freezer_do_not_count, but worst case that + * will result in an extra wakeup being sent to the task. It does not + * race with freezer_count(), the barriers in freezer_count() and + * freezer_should_skip() ensure that either freezer_count() sees + * freezing == true in try_to_freeze() and freezes, or + * freezer_should_skip() sees !PF_FREEZE_SKIP and freezes the task + * normally. + */ + if (freezer_should_skip(p)) + return false; + spin_lock_irqsave(&freezer_lock, flags); if (!freezing(p) || frozen(p)) { spin_unlock_irqrestore(&freezer_lock, flags); -- cgit v0.10.2 From b01235861b84c0f6107d3f9da189c9898fc3caaf Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:12 +0000 Subject: freezer: convert freezable helpers to freezer_do_not_count() Freezing tasks will wake up almost every userspace task from where it is blocking and force it to run until it hits a call to try_to_sleep(), generally on the exit path from the syscall it is blocking in. On resume each task will run again, usually restarting the syscall and running until it hits the same blocking call as it was originally blocked in. Convert the existing wait_event_freezable* wrappers to use freezer_do_not_count(). Combined with a previous patch, these tasks will not run during suspend or resume unless they wake up for another reason, in which case they will run until they hit the try_to_freeze() in freezer_count(), and then continue processing the wakeup after tasks are thawed. This results in a small change in behavior, previously a race between freezing and a normal wakeup would be won by the wakeup, now the task will freeze and then handle the wakeup after thawing. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/freezer.h b/include/linux/freezer.h index bcf9e65..c71337af 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -228,27 +228,19 @@ static inline bool freezer_should_skip(struct task_struct *p) #define wait_event_freezable(wq, condition) \ ({ \ int __retval; \ - for (;;) { \ - __retval = wait_event_interruptible(wq, \ - (condition) || freezing(current)); \ - if (__retval || (condition)) \ - break; \ - try_to_freeze(); \ - } \ + freezer_do_not_count(); \ + __retval = wait_event_interruptible(wq, (condition)); \ + freezer_count(); \ __retval; \ }) #define wait_event_freezable_timeout(wq, condition, timeout) \ ({ \ long __retval = timeout; \ - for (;;) { \ - __retval = wait_event_interruptible_timeout(wq, \ - (condition) || freezing(current), \ - __retval); \ - if (__retval <= 0 || (condition)) \ - break; \ - try_to_freeze(); \ - } \ + freezer_do_not_count(); \ + __retval = wait_event_interruptible_timeout(wq, (condition), \ + __retval); \ + freezer_count(); \ __retval; \ }) -- cgit v0.10.2 From 8ee492d6595573a0d4be168ebda1c7ceb4ec509d Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:13 +0000 Subject: freezer: convert freezable helpers to static inline where possible Some of the freezable helpers have to be macros because their condition argument needs to get evaluated every time through the wait loop. Convert the others to static inline to make future changes easier. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/freezer.h b/include/linux/freezer.h index c71337af..8430d4c5 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -159,46 +159,46 @@ static inline bool freezer_should_skip(struct task_struct *p) } /* - * These macros are intended to be used whenever you want allow a sleeping + * These functions are intended to be used whenever you want allow a sleeping * task to be frozen. Note that neither return any clear indication of * whether a freeze event happened while in this function. */ /* Like schedule(), but should not block the freezer. */ -#define freezable_schedule() \ -({ \ - freezer_do_not_count(); \ - schedule(); \ - freezer_count(); \ -}) +static inline void freezable_schedule(void) +{ + freezer_do_not_count(); + schedule(); + freezer_count(); +} /* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ -#define freezable_schedule_unsafe() \ -({ \ - freezer_do_not_count(); \ - schedule(); \ - freezer_count_unsafe(); \ -}) +static inline void freezable_schedule_unsafe(void) +{ + freezer_do_not_count(); + schedule(); + freezer_count_unsafe(); +} /* Like schedule_timeout_killable(), but should not block the freezer. */ -#define freezable_schedule_timeout_killable(timeout) \ -({ \ - long __retval; \ - freezer_do_not_count(); \ - __retval = schedule_timeout_killable(timeout); \ - freezer_count(); \ - __retval; \ -}) +static inline long freezable_schedule_timeout_killable(long timeout) +{ + long __retval; + freezer_do_not_count(); + __retval = schedule_timeout_killable(timeout); + freezer_count(); + return __retval; +} /* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */ -#define freezable_schedule_timeout_killable_unsafe(timeout) \ -({ \ - long __retval; \ - freezer_do_not_count(); \ - __retval = schedule_timeout_killable(timeout); \ - freezer_count_unsafe(); \ - __retval; \ -}) +static inline long freezable_schedule_timeout_killable_unsafe(long timeout) +{ + long __retval; + freezer_do_not_count(); + __retval = schedule_timeout_killable(timeout); + freezer_count_unsafe(); + return __retval; +} /* * Freezer-friendly wrappers around wait_event_interruptible(), -- cgit v0.10.2 From dd5ec0f4e72bed3d0e589e21fdf46eedafc106b7 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:14 +0000 Subject: freezer: add new freezable helpers using freezer_do_not_count() Freezing tasks will wake up almost every userspace task from where it is blocking and force it to run until it hits a call to try_to_sleep(), generally on the exit path from the syscall it is blocking in. On resume each task will run again, usually restarting the syscall and running until it hits the same blocking call as it was originally blocked in. To allow tasks to avoid running on every suspend/resume cycle, this patch adds additional freezable wrappers around blocking calls that call freezer_do_not_count(). Combined with the previous patch, these tasks will not run during suspend or resume unless they wake up for another reason, in which case they will run until they hit the try_to_freeze() in freezer_count(), and then continue processing the wakeup after tasks are thawed. Additional patches will convert the most common locations that userspace blocks in to use freezable helpers. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 8430d4c5..7fd81b8 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -180,6 +180,32 @@ static inline void freezable_schedule_unsafe(void) freezer_count_unsafe(); } +/* + * Like freezable_schedule_timeout(), but should not block the freezer. Do not + * call this with locks held. + */ +static inline long freezable_schedule_timeout(long timeout) +{ + long __retval; + freezer_do_not_count(); + __retval = schedule_timeout(timeout); + freezer_count(); + return __retval; +} + +/* + * Like schedule_timeout_interruptible(), but should not block the freezer. Do not + * call this with locks held. + */ +static inline long freezable_schedule_timeout_interruptible(long timeout) +{ + long __retval; + freezer_do_not_count(); + __retval = schedule_timeout_interruptible(timeout); + freezer_count(); + return __retval; +} + /* Like schedule_timeout_killable(), but should not block the freezer. */ static inline long freezable_schedule_timeout_killable(long timeout) { @@ -201,6 +227,20 @@ static inline long freezable_schedule_timeout_killable_unsafe(long timeout) } /* + * Like schedule_hrtimeout_range(), but should not block the freezer. Do not + * call this with locks held. + */ +static inline int freezable_schedule_hrtimeout_range(ktime_t *expires, + unsigned long delta, const enum hrtimer_mode mode) +{ + int __retval; + freezer_do_not_count(); + __retval = schedule_hrtimeout_range(expires, delta, mode); + freezer_count(); + return __retval; +} + +/* * Freezer-friendly wrappers around wait_event_interruptible(), * wait_event_killable() and wait_event_interruptible_timeout(), originally * defined in @@ -244,6 +284,16 @@ static inline long freezable_schedule_timeout_killable_unsafe(long timeout) __retval; \ }) +#define wait_event_freezable_exclusive(wq, condition) \ +({ \ + int __retval; \ + freezer_do_not_count(); \ + __retval = wait_event_interruptible_exclusive(wq, condition); \ + freezer_count(); \ + __retval; \ +}) + + #else /* !CONFIG_FREEZER */ static inline bool frozen(struct task_struct *p) { return false; } static inline bool freezing(struct task_struct *p) { return false; } @@ -267,18 +317,29 @@ static inline void set_freezable(void) {} #define freezable_schedule_unsafe() schedule() +#define freezable_schedule_timeout(timeout) schedule_timeout(timeout) + +#define freezable_schedule_timeout_interruptible(timeout) \ + schedule_timeout_interruptible(timeout) + #define freezable_schedule_timeout_killable(timeout) \ schedule_timeout_killable(timeout) #define freezable_schedule_timeout_killable_unsafe(timeout) \ schedule_timeout_killable(timeout) +#define freezable_schedule_hrtimeout_range(expires, delta, mode) \ + schedule_hrtimeout_range(expires, delta, mode) + #define wait_event_freezable(wq, condition) \ wait_event_interruptible(wq, condition) #define wait_event_freezable_timeout(wq, condition, timeout) \ wait_event_interruptible_timeout(wq, condition, timeout) +#define wait_event_freezable_exclusive(wq, condition) \ + wait_event_interruptible_exclusive(wq, condition) + #define wait_event_freezekillable(wq, condition) \ wait_event_killable(wq, condition) -- cgit v0.10.2 From e2610b268bb74d24866a9578e78d8c3de90ed596 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:15 +0000 Subject: binder: use freezable blocking calls Avoid waking up every thread sleeping in a binder call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 1567ac2..1ffc2eb 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -2140,13 +2141,13 @@ retry: if (!binder_has_proc_work(proc, thread)) ret = -EAGAIN; } else - ret = wait_event_interruptible_exclusive(proc->wait, binder_has_proc_work(proc, thread)); + ret = wait_event_freezable_exclusive(proc->wait, binder_has_proc_work(proc, thread)); } else { if (non_block) { if (!binder_has_thread_work(thread)) ret = -EAGAIN; } else - ret = wait_event_interruptible(thread->wait, binder_has_thread_work(thread)); + ret = wait_event_freezable(thread->wait, binder_has_thread_work(thread)); } binder_lock(__func__); -- cgit v0.10.2 From 1c441e921201d523b5a6036aea22b0b426bf1af2 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:16 +0000 Subject: epoll: use freezable blocking call Avoid waking up every thread sleeping in an epoll_wait call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/fs/eventpoll.c b/fs/eventpoll.c index deecc72..0cff443 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -1602,7 +1603,8 @@ fetch_events: } spin_unlock_irqrestore(&ep->lock, flags); - if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS)) + if (!freezable_schedule_hrtimeout_range(to, slack, + HRTIMER_MODE_ABS)) timed_out = 1; spin_lock_irqsave(&ep->lock, flags); -- cgit v0.10.2 From 9745cdb36da83aeec198650b410ca06304cf7928 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:17 +0000 Subject: select: use freezable blocking call Avoid waking up every thread sleeping in a select call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/fs/select.c b/fs/select.c index 8c1c96c..6b14dc7 100644 --- a/fs/select.c +++ b/fs/select.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -236,7 +237,8 @@ int poll_schedule_timeout(struct poll_wqueues *pwq, int state, set_current_state(state); if (!pwq->triggered) - rc = schedule_hrtimeout_range(expires, slack, HRTIMER_MODE_ABS); + rc = freezable_schedule_hrtimeout_range(expires, slack, + HRTIMER_MODE_ABS); __set_current_state(TASK_RUNNING); /* -- cgit v0.10.2 From 56467c7697f5aef6974501fbe2c3e63674583549 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:18 +0000 Subject: futex: use freezable blocking call Avoid waking up every thread sleeping in a futex_wait call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Acked-by: Thomas Gleixner Acked-by: Darren Hart Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/kernel/futex.c b/kernel/futex.c index b26dcfc..d710fae 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -61,6 +61,7 @@ #include #include #include +#include #include @@ -1807,7 +1808,7 @@ static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q, * is no timeout, or if it has yet to expire. */ if (!timeout || timeout->task) - schedule(); + freezable_schedule(); } __set_current_state(TASK_RUNNING); } -- cgit v0.10.2 From b0f8c44f30e58c3aaaaaf864d5c3d3cc2e8a4c2d Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:19 +0000 Subject: nanosleep: use freezable blocking call Avoid waking up every thread sleeping in a nanosleep call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Acked-by: Thomas Gleixner Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index fd4b13b..3ee4d06 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -1545,7 +1546,7 @@ static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mod t->task = NULL; if (likely(t->task)) - schedule(); + freezable_schedule(); hrtimer_cancel(&t->timer); mode = HRTIMER_MODE_ABS; -- cgit v0.10.2 From a2d5f1f5d941593e61071dc78e9de228eda5475f Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:20 +0000 Subject: sigtimedwait: use freezable blocking call Avoid waking up every thread sleeping in a sigtimedwait call during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/kernel/signal.c b/kernel/signal.c index 113411b..50e4107 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2848,7 +2848,7 @@ int do_sigtimedwait(const sigset_t *which, siginfo_t *info, recalc_sigpending(); spin_unlock_irq(&tsk->sighand->siglock); - timeout = schedule_timeout_interruptible(timeout); + timeout = freezable_schedule_timeout_interruptible(timeout); spin_lock_irq(&tsk->sighand->siglock); __set_task_blocked(tsk, &tsk->real_blocked); -- cgit v0.10.2 From 2b15af6f953012aac49984ead3f8ec744d941540 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 6 May 2013 23:50:21 +0000 Subject: af_unix: use freezable blocking calls in read Avoid waking up every thread sleeping in read call on an AF_UNIX socket during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: Tejun Heo Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 826e099..c4ce243 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -114,6 +114,7 @@ #include #include #include +#include struct hlist_head unix_socket_table[2 * UNIX_HASH_SIZE]; EXPORT_SYMBOL_GPL(unix_socket_table); @@ -1879,7 +1880,7 @@ static long unix_stream_data_wait(struct sock *sk, long timeo, set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags); unix_state_unlock(sk); - timeo = schedule_timeout(timeo); + timeo = freezable_schedule_timeout(timeo); unix_state_lock(sk); clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags); } -- cgit v0.10.2 From bdf0eb3a026922dbf57f6839f3184c8d2ecc5f2e Mon Sep 17 00:00:00 2001 From: David Flater Date: Fri, 10 May 2013 14:37:43 +0200 Subject: pnp: restore automatic resolution of DMA conflicts To fix a 5-year-old regression, reverse changes made by commit 7ef3639 (PNP: don't fail device init if no DMA channel available). As an example to show the problem, my sound card provides a prioritized list of PnP "dependent sets" of requested resources: dependent set 0 (preferred) wants DMA 5. dependent set 1 (acceptable) will take DMA 5, 6, or 7. ... dependent set 4 (acceptable) doesn't request a high DMA. If DMA 5 is not available, pnp_assign_dma has to fail on set 0 so that pnp_auto_config_dev will move on to set 1 and get DMA 6 or 7. Instead, pnp_assign_dma adds the resource with flags |= IORESOURCE_DISABLED and returns success. pnp_auto_config_dev just sees success and therefore chooses set 0 with a disabled DMA and never tries the sets that would have resolved the conflict. Furthermore, this mode of "success" is unexpected and unhandled in sound/isa/sb and probably other drivers. sb assumes that the returned DMA is enabled and obliviously uses the invalid DMA number. Observed consequences were sb successfully grabbing a DMA that was expressly forbidden by the kernel parameter pnp_reserve_dma. The only upside to the original change would be as a kludge for devices that can operate in degraded mode without a DMA but that don't provide the corresponding non-preferred dependent set. The right workaround for those devices is to synthesize the missing set in quirks.c; otherwise, you're reinventing PnP fallback functionality at the driver level for that device and all others. Signed-off-by: David Flater Signed-off-by: Rafael J. Wysocki diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 95cebf0..9357aa7 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -211,6 +211,12 @@ static int pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) res->start = -1; res->end = -1; + if (!rule->map) { + res->flags |= IORESOURCE_DISABLED; + pnp_dbg(&dev->dev, " dma %d disabled\n", idx); + goto __add; + } + for (i = 0; i < 8; i++) { if (rule->map & (1 << xtab[i])) { res->start = res->end = xtab[i]; @@ -218,11 +224,9 @@ static int pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) goto __add; } } -#ifdef MAX_DMA_CHANNELS - res->start = res->end = MAX_DMA_CHANNELS; -#endif - res->flags |= IORESOURCE_DISABLED; - pnp_dbg(&dev->dev, " disable dma %d\n", idx); + + pnp_dbg(&dev->dev, " couldn't assign dma %d\n", idx); + return -EBUSY; __add: pnp_add_dma_resource(dev, res->start, res->flags); -- cgit v0.10.2 From 5d69030db5c93d0521174ef0d3d5d3bceeb04e42 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 14 May 2013 19:08:50 +0530 Subject: cpufreq: tegra: Don't initialize .index field of cpufreq_frequency_table The Tegra cpufreq driver doesn't use .index field of cpufreq_frequency_table and so we don't need to initialize it. Don't initialize it. Signed-off-by: Viresh Kumar Acked-by: Stephen Warren Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index c74c0e1..81561be 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -28,17 +28,16 @@ #include #include -/* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, + { .frequency = 216000 }, + { .frequency = 312000 }, + { .frequency = 456000 }, + { .frequency = 608000 }, + { .frequency = 760000 }, + { .frequency = 816000 }, + { .frequency = 912000 }, + { .frequency = 1000000 }, + { .frequency = CPUFREQ_TABLE_END }, }; #define NUM_CPUS 2 -- cgit v0.10.2 From 3f869d6d41d032392abafe17ea5257a2514a24a7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 May 2013 05:09:56 +0000 Subject: cpufreq: Add EXPORT_SYMBOL_GPL for have_governor_per_policy This patch adds: EXPORT_SYMBOL_GPL(have_governor_per_policy), so that this routine can be used by modules too. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 2d53f47..2f25469 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -132,6 +132,7 @@ bool have_governor_per_policy(void) { return cpufreq_driver->have_governor_per_policy; } +EXPORT_SYMBOL_GPL(have_governor_per_policy); static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) { -- cgit v0.10.2 From 944e9a0316e60bc5bc122e46c1fde36e5f6e9f56 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 May 2013 05:09:57 +0000 Subject: cpufreq: governors: Move get_governor_parent_kobj() to cpufreq.c get_governor_parent_kobj() can be used by any governor, generic cpufreq governors or platform specific ones and so must be present in cpufreq.c instead of cpufreq_governor.c. This patch moves it to cpufreq.c. This also adds EXPORT_SYMBOL_GPL(get_governor_parent_kobj) so that modules can use this function too. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 2f25469..3faf62b 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -134,6 +134,15 @@ bool have_governor_per_policy(void) } EXPORT_SYMBOL_GPL(have_governor_per_policy); +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) +{ + if (have_governor_per_policy()) + return &policy->kobj; + else + return cpufreq_global_kobject; +} +EXPORT_SYMBOL_GPL(get_governor_parent_kobj); + static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) { struct cpufreq_policy *data; diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 5af40ad..d1421b4 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -29,14 +29,6 @@ #include "cpufreq_governor.h" -static struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) -{ - if (have_governor_per_policy()) - return &policy->kobj; - else - return cpufreq_global_kobject; -} - static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) { if (have_governor_per_policy()) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 037d36a..dd1a5d4 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -340,6 +340,7 @@ const char *cpufreq_get_current_driver(void); int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); bool have_governor_per_policy(void); +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy); #ifdef CONFIG_CPU_FREQ /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ -- cgit v0.10.2 From 72a4ce340a7ebf39e1c6fdc8f5feb4f974d6c635 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 17 May 2013 11:26:32 +0000 Subject: cpufreq: Move get_cpu_idle_time() to cpufreq.c Governors other than ondemand and conservative can also use get_cpu_idle_time() and they aren't required to compile cpufreq_governor.c. So, move these independent routines to cpufreq.c instead. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3faf62b..c6ab218 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -17,7 +17,9 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include +#include #include #include #include @@ -25,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -143,6 +146,41 @@ struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) } EXPORT_SYMBOL_GPL(get_governor_parent_kobj); +static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) +{ + u64 idle_time; + u64 cur_wall_time; + u64 busy_time; + + cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); + + busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; + + idle_time = cur_wall_time - busy_time; + if (wall) + *wall = cputime_to_usecs(cur_wall_time); + + return cputime_to_usecs(idle_time); +} + +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + else if (!io_busy) + idle_time += get_cpu_iowait_time_us(cpu, wall); + + return idle_time; +} +EXPORT_SYMBOL_GPL(get_cpu_idle_time); + static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) { struct cpufreq_policy *data; diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index d1421b4..b6cfd55 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include @@ -37,41 +36,6 @@ static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) return dbs_data->cdata->attr_group_gov_sys; } -static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) -{ - u64 idle_time; - u64 cur_wall_time; - u64 busy_time; - - cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); - - busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; - - idle_time = cur_wall_time - busy_time; - if (wall) - *wall = cputime_to_usecs(cur_wall_time); - - return cputime_to_usecs(idle_time); -} - -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) -{ - u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); - - if (idle_time == -1ULL) - return get_cpu_idle_time_jiffy(cpu, wall); - else if (!io_busy) - idle_time += get_cpu_iowait_time_us(cpu, wall); - - return idle_time; -} -EXPORT_SYMBOL_GPL(get_cpu_idle_time); - void dbs_check_cpu(struct dbs_data *dbs_data, int cpu) { struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index e16a961..e7bbf76 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -256,7 +256,6 @@ static ssize_t show_sampling_rate_min_gov_pol \ return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \ } -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy); void dbs_check_cpu(struct dbs_data *dbs_data, int cpu); bool need_load_eval(struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index dd1a5d4..fbf392a 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -337,6 +337,7 @@ const char *cpufreq_get_current_driver(void); /********************************************************************* * CPUFREQ 2.6. INTERFACE * *********************************************************************/ +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy); int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); bool have_governor_per_policy(void); -- cgit v0.10.2 From 2361be23666232dbb4851a527f466c4cbf5340fc Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 17 May 2013 16:09:09 +0530 Subject: cpufreq: Don't create empty /sys/devices/system/cpu/cpufreq directory When we don't have any file in cpu/cpufreq directory we shouldn't create it. Specially with the introduction of per-policy governor instance patchset, even governors are moved to cpu/cpu*/cpufreq/governor-name directory and so this directory is just not required. Lets have it only when required. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 11b8b4b..8c02622 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -947,7 +947,7 @@ static void __init acpi_cpufreq_boost_init(void) /* We create the boost file in any case, though for systems without * hardware support it will be read-only and hardwired to return 0. */ - if (sysfs_create_file(cpufreq_global_kobject, &(global_boost.attr))) + if (cpufreq_sysfs_create_file(&(global_boost.attr))) pr_warn(PFX "could not register global boost sysfs file\n"); else pr_debug("registered global boost sysfs file\n"); @@ -955,7 +955,7 @@ static void __init acpi_cpufreq_boost_init(void) static void __exit acpi_cpufreq_boost_exit(void) { - sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr)); + cpufreq_sysfs_remove_file(&(global_boost.attr)); if (msrs) { unregister_cpu_notifier(&boost_nb); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index c6ab218..ce9273a7 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -678,9 +678,6 @@ static struct attribute *default_attrs[] = { NULL }; -struct kobject *cpufreq_global_kobject; -EXPORT_SYMBOL(cpufreq_global_kobject); - #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) #define to_attr(a) container_of(a, struct freq_attr, attr) @@ -751,6 +748,49 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; +struct kobject *cpufreq_global_kobject; +EXPORT_SYMBOL(cpufreq_global_kobject); + +static int cpufreq_global_kobject_usage; + +int cpufreq_get_global_kobject(void) +{ + if (!cpufreq_global_kobject_usage++) + return kobject_add(cpufreq_global_kobject, + &cpu_subsys.dev_root->kobj, "%s", "cpufreq"); + + return 0; +} +EXPORT_SYMBOL(cpufreq_get_global_kobject); + +void cpufreq_put_global_kobject(void) +{ + if (!--cpufreq_global_kobject_usage) + kobject_del(cpufreq_global_kobject); +} +EXPORT_SYMBOL(cpufreq_put_global_kobject); + +int cpufreq_sysfs_create_file(const struct attribute *attr) +{ + int ret = cpufreq_get_global_kobject(); + + if (!ret) { + ret = sysfs_create_file(cpufreq_global_kobject, attr); + if (ret) + cpufreq_put_global_kobject(); + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_sysfs_create_file); + +void cpufreq_sysfs_remove_file(const struct attribute *attr) +{ + sysfs_remove_file(cpufreq_global_kobject, attr); + cpufreq_put_global_kobject(); +} +EXPORT_SYMBOL(cpufreq_sysfs_remove_file); + /* symlink affected CPUs */ static int cpufreq_add_dev_symlink(unsigned int cpu, struct cpufreq_policy *policy) @@ -2020,7 +2060,7 @@ static int __init cpufreq_core_init(void) init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); } - cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj); + cpufreq_global_kobject = kobject_create(); BUG_ON(!cpufreq_global_kobject); register_syscore_ops(&cpufreq_syscore_ops); diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index b6cfd55..7532570 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -231,6 +231,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, return rc; } + if (!have_governor_per_policy()) + WARN_ON(cpufreq_get_global_kobject()); + rc = sysfs_create_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); if (rc) { @@ -269,6 +272,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); + if (!have_governor_per_policy()) + cpufreq_put_global_kobject(); + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && (policy->governor->initialized == 1)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index fbf392a..1b5b5ef 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -71,6 +71,10 @@ struct cpufreq_governor; /* /sys/devices/system/cpu/cpufreq: entry point for global variables */ extern struct kobject *cpufreq_global_kobject; +int cpufreq_get_global_kobject(void); +void cpufreq_put_global_kobject(void); +int cpufreq_sysfs_create_file(const struct attribute *attr); +void cpufreq_sysfs_remove_file(const struct attribute *attr); #define CPUFREQ_ETERNAL (-1) struct cpufreq_cpuinfo { -- cgit v0.10.2 From 1001b4d4a8ee6b2e7a6078a02ccdf68f91b192bd Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Thu, 30 May 2013 00:30:05 +0200 Subject: CPU: Fix sysfs cpu/online of offlined CPUs As reported by Dave Hansen, sysfs cpu/online shows 1 for offlined CPUs at boot. Fix this problem by initializing dev.offline with cpu_online() when registering a CPU. References: https://lkml.org/lkml/2013/5/29/403 Reported-and-tested-by: Dave Hansen Signed-off-by: Toshi Kani Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 7431ba6..1d110dc6 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -265,6 +265,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; cpu->dev.offline_disabled = !cpu->hotpluggable; + cpu->dev.offline = !cpu_online(num); #ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE cpu->dev.bus->uevent = arch_cpu_uevent; #endif -- cgit v0.10.2 From 2e4f1db49d97222110b6add9a2c6cf5251a41e35 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 30 May 2013 21:55:46 +0200 Subject: ACPI / processor: Initialize per_cpu(processors, pr->id) properly Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) forgot about initializing the per-CPU 'processors' variables which lead to ACPI cpuidle failure to use C-states and caused boot slowdown on multi-CPU machines. Fix the problem by adding per_cpu(processors, pr->id) initialization to acpi_processor_add() and add make acpi_processor_remove() clean it up as appropriate. Also modify acpi_processor_stop() so that it doesn't clear per_cpu(processors, pr->id) on processor driver removal which would then cause problems to happen when the driver is loaded again. This version of the patch contains fixes from Yinghai Lu. Reported-and-tested-by: Yinghai Lu Reported-and-tested-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 587d2af..cae2641 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -29,6 +29,9 @@ ACPI_MODULE_NAME("processor"); +DEFINE_PER_CPU(struct acpi_processor *, processors); +EXPORT_PER_CPU_SYMBOL(processors); + /* -------------------------------------------------------------------------- Errata Handling -------------------------------------------------------------------------- */ @@ -387,6 +390,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device, * checks. */ per_cpu(processor_device_array, pr->id) = device; + per_cpu(processors, pr->id) = pr; dev = get_cpu_device(pr->id); ACPI_HANDLE_SET(dev, pr->handle); @@ -407,6 +411,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device, err: free_cpumask_var(pr->throttling.shared_cpu_map); device->driver_data = NULL; + per_cpu(processors, pr->id) = NULL; err_free_pr: kfree(pr); return result; @@ -441,6 +446,7 @@ static void acpi_processor_remove(struct acpi_device *device) /* Clean up. */ per_cpu(processor_device_array, pr->id) = NULL; + per_cpu(processors, pr->id) = NULL; try_offline_node(cpu_to_node(pr->id)); /* Remove the CPU. */ diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index ac28f18..d93963f 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -78,9 +78,6 @@ static struct device_driver acpi_processor_driver = { .remove = acpi_processor_stop, }; -DEFINE_PER_CPU(struct acpi_processor *, processors); -EXPORT_PER_CPU_SYMBOL(processors); - static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { struct acpi_device *device = data; @@ -268,8 +265,6 @@ static int acpi_processor_stop(struct device *dev) thermal_cooling_device_unregister(pr->cdev); pr->cdev = NULL; } - - per_cpu(processors, pr->id) = NULL; return 0; } -- cgit v0.10.2 From b2c064b25ad07169b2892a733918e6b941bf3366 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:38:55 +0200 Subject: Driver core / memory: Simplify __memory_block_change_state() As noted by Tang Chen, the last_online field in struct memory_block introduced by commit 4960e05 (Driver core: Introduce offline/online callbacks for memory blocks) is not really necessary, because online_pages() restores the previous state if passed ONLINE_KEEP as the last argument. Therefore, remove that field along with the code referring to it. References: http://marc.info/?l=linux-kernel&m=136919777305599&w=2 Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Tang Chen diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c8f3b63..c7092bc 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -291,13 +291,7 @@ static int __memory_block_change_state(struct memory_block *mem, mem->state = MEM_GOING_OFFLINE; ret = memory_block_action(mem->start_section_nr, to_state, online_type); - if (ret) { - mem->state = from_state_req; - } else { - mem->state = to_state; - if (to_state == MEM_ONLINE) - mem->last_online = online_type; - } + mem->state = ret ? from_state_req : to_state; return ret; } @@ -310,7 +304,7 @@ static int memory_subsys_online(struct device *dev) ret = mem->state == MEM_ONLINE ? 0 : __memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, - mem->last_online); + ONLINE_KEEP); mutex_unlock(&mem->state_mutex); return ret; @@ -618,7 +612,6 @@ static int init_memory_block(struct memory_block **memory, base_memory_block_id(scn_nr) * sections_per_block; mem->end_section_nr = mem->start_section_nr + sections_per_block - 1; mem->state = state; - mem->last_online = ONLINE_KEEP; mem->section_count++; mutex_init(&mem->state_mutex); start_pfn = section_nr_to_pfn(mem->start_section_nr); diff --git a/include/linux/memory.h b/include/linux/memory.h index 3d53465..85c31a8 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -26,7 +26,6 @@ struct memory_block { unsigned long start_section_nr; unsigned long end_section_nr; unsigned long state; - int last_online; int section_count; /* -- cgit v0.10.2 From 2e199192df85eb936a7829dc28b57b85c59c86fc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:40:35 +0200 Subject: ACPI: Drop removal_type field from struct acpi_device The ACPI processor driver was the only user of the removal_type field in struct acpi_device, but it doesn't use that field any more after recent changes. Thus, removal_type has no more users, so drop it along with the associated data type. Signed-off-by: Rafael J. Wysocki Acked-by: Toshi Kani diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ad82bb2..ba8ee6cb 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1036,7 +1036,6 @@ int acpi_device_add(struct acpi_device *device, printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", dev_name(&device->dev)); - device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; err: @@ -2025,7 +2024,6 @@ static acpi_status acpi_bus_device_detach(acpi_handle handle, u32 lvl_not_used, if (!acpi_bus_get_device(handle, &device)) { struct acpi_scan_handler *dev_handler = device->handler; - device->removal_type = ACPI_BUS_REMOVAL_EJECT; if (dev_handler) { if (dev_handler->detach) dev_handler->detach(device); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 4d5d3e7..1a681ee 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -63,13 +63,6 @@ acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld_info **pld #define ACPI_BUS_FILE_ROOT "acpi" extern struct proc_dir_entry *acpi_root_dir; -enum acpi_bus_removal_type { - ACPI_BUS_REMOVAL_NORMAL = 0, - ACPI_BUS_REMOVAL_EJECT, - ACPI_BUS_REMOVAL_SUPRISE, - ACPI_BUS_REMOVAL_TYPE_COUNT -}; - enum acpi_bus_device_type { ACPI_BUS_TYPE_DEVICE = 0, ACPI_BUS_TYPE_POWER, @@ -311,7 +304,6 @@ struct acpi_device { struct acpi_driver *driver; void *driver_data; struct device dev; - enum acpi_bus_removal_type removal_type; /* indicate for different removal type */ u8 physical_node_count; struct list_head physical_node_list; struct mutex physical_node_lock; -- cgit v0.10.2 From be547436c22c3b7d934d9afd841cfd7a6807f7ab Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:40:56 +0200 Subject: ACPI / processor: Pass processor object handle to acpi_bind_one() Make acpi_processor_add() pass the ACPI handle of the processor namespace object to acpi_bind_one() instead of setting it directly to allow acpi_bind_one() to catch possible bugs causing the ACPI handle of the processor device to be set earlier. Signed-off-by: Rafael J. Wysocki Acked-by: Toshi Kani diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index cae2641..157e738 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -393,8 +393,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device, per_cpu(processors, pr->id) = pr; dev = get_cpu_device(pr->id); - ACPI_HANDLE_SET(dev, pr->handle); - result = acpi_bind_one(dev, NULL); + result = acpi_bind_one(dev, pr->handle); if (result) goto err; -- cgit v0.10.2 From ea50be59345a2b714fd3ed43e1bba89906c177c3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:41:50 +0200 Subject: Driver core / MM: Drop offline_memory_block() Since offline_memory_block(mem) is functionally equivalent to device_offline(&mem->dev), make the only caller of the former use the latter instead and drop offline_memory_block() entirely. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Acked-by: Toshi Kani diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c7092bc..4ebf97f 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -728,27 +728,6 @@ int unregister_memory_section(struct mem_section *section) } #endif /* CONFIG_MEMORY_HOTREMOVE */ -/* - * offline one memory block. If the memory block has been offlined, do nothing. - * - * Call under device_hotplug_lock. - */ -int offline_memory_block(struct memory_block *mem) -{ - int ret = 0; - - mutex_lock(&mem->state_mutex); - if (mem->state != MEM_OFFLINE) { - ret = __memory_block_change_state_uevent(mem, MEM_OFFLINE, - MEM_ONLINE, -1); - if (!ret) - mem->dev.offline = true; - } - mutex_unlock(&mem->state_mutex); - - return ret; -} - /* return true if the memory block is offlined, otherwise, return false */ bool is_memblock_offlined(struct memory_block *mem) { diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 2975b7b..ae5480a 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -251,7 +251,6 @@ extern int mem_online_node(int nid); extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages); -extern int offline_memory_block(struct memory_block *mem); extern bool is_memblock_offlined(struct memory_block *mem); extern int remove_memory(int nid, u64 start, u64 size); extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 5ea1287..a39841d 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1680,7 +1680,7 @@ int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, static int offline_memory_block_cb(struct memory_block *mem, void *arg) { int *ret = arg; - int error = offline_memory_block(mem); + int error = device_offline(&mem->dev); if (error != 0 && *ret == 0) *ret = error; -- cgit v0.10.2 From 303bfdb1a14d0460feb859cd008ff81da36b517c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:43:13 +0200 Subject: ACPI / scan: Add second pass of companion offlining to hot-remove code As indicated by comments in mm/memory_hotplug.c:remove_memory(), if CONFIG_MEMCG is set, it may not be possible to offline all of the memory blocks held by one module (FRU) in one pass (because one of them may be used by the others to store page cgroup in that case and that block has to be offlined before the other ones). To handle that arguably corner case, add a second pass of companion device offlining to acpi_scan_hot_remove() and make it ignore errors returned in the first pass (and make it skip the second pass if the first one is successful). Signed-off-by: Rafael J. Wysocki Acked-by: Toshi Kani diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ba8ee6cb..2959fe1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -131,6 +131,7 @@ static acpi_status acpi_bus_offline_companions(acpi_handle handle, u32 lvl, { struct acpi_device *device = NULL; struct acpi_device_physical_node *pn; + bool second_pass = (bool)data; acpi_status status = AE_OK; if (acpi_bus_get_device(handle, &device)) @@ -141,15 +142,26 @@ static acpi_status acpi_bus_offline_companions(acpi_handle handle, u32 lvl, list_for_each_entry(pn, &device->physical_node_list, node) { int ret; + if (second_pass) { + /* Skip devices offlined by the first pass. */ + if (pn->put_online) + continue; + } else { + pn->put_online = false; + } ret = device_offline(pn->dev); if (acpi_force_hot_remove) continue; - if (ret < 0) { - status = AE_ERROR; - break; + if (ret >= 0) { + pn->put_online = !ret; + } else { + *ret_p = pn->dev; + if (second_pass) { + status = AE_ERROR; + break; + } } - pn->put_online = !ret; } mutex_unlock(&device->physical_node_lock); @@ -185,6 +197,7 @@ static int acpi_scan_hot_remove(struct acpi_device *device) acpi_handle not_used; struct acpi_object_list arg_list; union acpi_object arg; + struct device *errdev; acpi_status status; unsigned long long sta; @@ -197,22 +210,42 @@ static int acpi_scan_hot_remove(struct acpi_device *device) lock_device_hotplug(); - status = acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, - NULL, acpi_bus_offline_companions, NULL, - NULL); - if (ACPI_SUCCESS(status) || acpi_force_hot_remove) - status = acpi_bus_offline_companions(handle, 0, NULL, NULL); - - if (ACPI_FAILURE(status) && !acpi_force_hot_remove) { - acpi_bus_online_companions(handle, 0, NULL, NULL); + /* + * Carry out two passes here and ignore errors in the first pass, + * because if the devices in question are memory blocks and + * CONFIG_MEMCG is set, one of the blocks may hold data structures + * that the other blocks depend on, but it is not known in advance which + * block holds them. + * + * If the first pass is successful, the second one isn't needed, though. + */ + errdev = NULL; + acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, + NULL, acpi_bus_offline_companions, + (void *)false, (void **)&errdev); + acpi_bus_offline_companions(handle, 0, (void *)false, (void **)&errdev); + if (errdev) { + errdev = NULL; acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, - acpi_bus_online_companions, NULL, NULL, - NULL); - - unlock_device_hotplug(); - - put_device(&device->dev); - return -EBUSY; + NULL, acpi_bus_offline_companions, + (void *)true , (void **)&errdev); + if (!errdev || acpi_force_hot_remove) + acpi_bus_offline_companions(handle, 0, (void *)true, + (void **)&errdev); + + if (errdev && !acpi_force_hot_remove) { + dev_warn(errdev, "Offline failed.\n"); + acpi_bus_online_companions(handle, 0, NULL, NULL); + acpi_walk_namespace(ACPI_TYPE_ANY, handle, + ACPI_UINT32_MAX, + acpi_bus_online_companions, NULL, + NULL, NULL); + + unlock_device_hotplug(); + + put_device(&device->dev); + return -EBUSY; + } } ACPI_DEBUG_PRINT((ACPI_DB_INFO, -- cgit v0.10.2 From 242831eb15a06fa4414eaa705fdc6dd432ab98d1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 27 May 2013 12:58:46 +0200 Subject: Memory hotplug / ACPI: Simplify memory removal Now that the memory offlining should be taken care of by the companion device offlining code in acpi_scan_hot_remove(), the ACPI memory hotplug driver doesn't need to offline it in remove_memory() any more. Moreover, since the return value of remove_memory() is not used, it's better to make it be a void function and trigger a BUG() if the memory scheduled for removal is not offline. Change the code in accordance with the above observations. Signed-off-by: Rafael J. Wysocki Reviewed-by: Toshi Kani diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 5590db1..c711d11 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -271,13 +271,11 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) return 0; } -static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) +static void acpi_memory_remove_memory(struct acpi_memory_device *mem_device) { acpi_handle handle = mem_device->device->handle; - int result = 0, nid; struct acpi_memory_info *info, *n; - - nid = acpi_get_node(handle); + int nid = acpi_get_node(handle); list_for_each_entry_safe(info, n, &mem_device->res_list, list) { if (!info->enabled) @@ -287,15 +285,10 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) nid = memory_add_physaddr_to_nid(info->start_addr); acpi_unbind_memory_blocks(info, handle); - result = remove_memory(nid, info->start_addr, info->length); - if (result) - return result; - + remove_memory(nid, info->start_addr, info->length); list_del(&info->list); kfree(info); } - - return result; } static void acpi_memory_device_free(struct acpi_memory_device *mem_device) diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index ae5480a..00569fb 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -252,7 +252,7 @@ extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages); extern bool is_memblock_offlined(struct memory_block *mem); -extern int remove_memory(int nid, u64 start, u64 size); +extern void remove_memory(int nid, u64 start, u64 size); extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, int nr_pages); extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms); diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index a39841d..7026fbc 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1670,24 +1670,6 @@ int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, } #ifdef CONFIG_MEMORY_HOTREMOVE -/** - * offline_memory_block_cb - callback function for offlining memory block - * @mem: the memory block to be offlined - * @arg: buffer to hold error msg - * - * Always return 0, and put the error msg in arg if any. - */ -static int offline_memory_block_cb(struct memory_block *mem, void *arg) -{ - int *ret = arg; - int error = device_offline(&mem->dev); - - if (error != 0 && *ret == 0) - *ret = error; - - return 0; -} - static int is_memblock_offlined_cb(struct memory_block *mem, void *arg) { int ret = !is_memblock_offlined(mem); @@ -1813,54 +1795,22 @@ void try_offline_node(int nid) } EXPORT_SYMBOL(try_offline_node); -int __ref remove_memory(int nid, u64 start, u64 size) +void __ref remove_memory(int nid, u64 start, u64 size) { - unsigned long start_pfn, end_pfn; - int ret = 0; - int retry = 1; - - start_pfn = PFN_DOWN(start); - end_pfn = PFN_UP(start + size - 1); - - /* - * When CONFIG_MEMCG is on, one memory block may be used by other - * blocks to store page cgroup when onlining pages. But we don't know - * in what order pages are onlined. So we iterate twice to offline - * memory: - * 1st iterate: offline every non primary memory block. - * 2nd iterate: offline primary (i.e. first added) memory block. - */ -repeat: - walk_memory_range(start_pfn, end_pfn, &ret, - offline_memory_block_cb); - if (ret) { - if (!retry) - return ret; - - retry = 0; - ret = 0; - goto repeat; - } + int ret; lock_memory_hotplug(); /* - * we have offlined all memory blocks like this: - * 1. lock memory hotplug - * 2. offline a memory block - * 3. unlock memory hotplug - * - * repeat step1-3 to offline the memory block. All memory blocks - * must be offlined before removing memory. But we don't hold the - * lock in the whole operation. So we should check whether all - * memory blocks are offlined. + * All memory blocks must be offlined before removing memory. Check + * whether all memory blocks in question are offline and trigger a BUG() + * if this is not the case. */ - - ret = walk_memory_range(start_pfn, end_pfn, NULL, + ret = walk_memory_range(PFN_DOWN(start), PFN_UP(start + size - 1), NULL, is_memblock_offlined_cb); if (ret) { unlock_memory_hotplug(); - return ret; + BUG(); } /* remove memmap entry */ @@ -1871,17 +1821,12 @@ repeat: try_offline_node(nid); unlock_memory_hotplug(); - - return 0; } #else int offline_pages(unsigned long start_pfn, unsigned long nr_pages) { return -EINVAL; } -int remove_memory(int nid, u64 start, u64 size) -{ - return -EINVAL; -} +void remove_memory(int nid, u64 start, u64 size) {} #endif /* CONFIG_MEMORY_HOTREMOVE */ EXPORT_SYMBOL_GPL(remove_memory); -- cgit v0.10.2 From f6f57f605eecd4f6a9b59b55bf91c50fe7b52186 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 30 May 2013 09:59:00 +0800 Subject: ACPICA: Change an exception code for the ASL UnLoad() operator Change the exception code for the case where the input DdbHandle is invalid from AE_BAD_PARAMETER to the more appropriate AE_AML_OPERAND_TYPE. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index d93b70b..a689aac 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -588,7 +588,7 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) || (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) || (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* Get the table index from the ddb_handle */ -- cgit v0.10.2 From e1405ca5ebf1068a0d62afd2fec8f0354038147a Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 30 May 2013 09:59:21 +0800 Subject: ACPICA: Add BIOS error interface for predefined name validation support BIOS error message for errors found in predefined names. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 53666bd..530a2f8 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -374,10 +374,11 @@ * the plist contains a set of parens to allow variable-length lists. * These macros are used for both the debug and non-debug versions of the code. */ -#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e); -#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e); -#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist -#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist +#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e); +#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e); +#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist +#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist +#define ACPI_BIOS_ERROR_PREDEFINED(plist) acpi_ut_predefined_bios_error plist #else @@ -387,6 +388,7 @@ #define ACPI_ERROR_METHOD(s, n, p, e) #define ACPI_WARN_PREDEFINED(plist) #define ACPI_INFO_PREDEFINED(plist) +#define ACPI_BIOS_ERROR_PREDEFINED(plist) #endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 202f4f1..19e5cf7 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -670,6 +670,12 @@ acpi_ut_predefined_info(const char *module_name, u32 line_number, char *pathname, u8 node_flags, const char *format, ...); +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_bios_error(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...); + void acpi_ut_namespace_error(const char *module_name, u32 line_number, diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 976b6c7..61a2c17 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -82,8 +82,8 @@ extern FILE *acpi_gbl_output_file; #define ACPI_MSG_EXCEPTION "ACPI Exception: " #define ACPI_MSG_WARNING "ACPI Warning: " #define ACPI_MSG_INFO "ACPI: " -#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: " -#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: " +#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Error (bug): " +#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Warning (bug): " /* * Common message suffix */ @@ -325,7 +325,7 @@ acpi_ut_predefined_warning(const char *module_name, return; } - acpi_os_printf(ACPI_MSG_WARNING "For %s: ", pathname); + acpi_os_printf(ACPI_MSG_WARNING "%s: ", pathname); va_start(arg_list, format); acpi_os_vprintf(format, arg_list); @@ -367,7 +367,50 @@ acpi_ut_predefined_info(const char *module_name, return; } - acpi_os_printf(ACPI_MSG_INFO "For %s: ", pathname); + acpi_os_printf(ACPI_MSG_INFO "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_bios_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: BIOS error message for predefined names. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_bios_error(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_BIOS_ERROR "%s: ", pathname); va_start(arg_list, format); acpi_os_vprintf(format, arg_list); -- cgit v0.10.2 From 29a241cc02110b8b2259fd72719b8cadc03909be Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 30 May 2013 10:00:01 +0800 Subject: ACPICA: Add argument typechecking for all predefined ACPI names Fully implements typechecking on all incoming arguments for all predefined names. This ensures that ACPI-related drivers are passing the correct number of arguments, each of the correct object type. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 7ddf29e..29b3dab 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -83,6 +83,7 @@ acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o acpi-y += \ nsaccess.o \ nsalloc.o \ + nsarguments.o \ nsconvert.o \ nsdump.o \ nseval.o \ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index d5bfbd3..dfed265 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -362,23 +362,6 @@ union acpi_predefined_info { #pragma pack() -/* Data block used during object validation */ - -struct acpi_predefined_data { - char *pathname; - const union acpi_predefined_info *predefined; - union acpi_operand_object *parent_package; - struct acpi_namespace_node *node; - u32 flags; - u32 return_btype; - u8 node_flags; -}; - -/* Defines for Flags field above */ - -#define ACPI_OBJECT_REPAIRED 1 -#define ACPI_OBJECT_WRAPPED 2 - /* Return object auto-repair info */ typedef acpi_status(*acpi_object_converter) (union acpi_operand_object diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index d2e4918..b83dc32 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -223,22 +223,33 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info); void acpi_ns_exec_module_code_list(void); /* - * nspredef - Support for predefined/reserved names + * nsarguments - Argument count/type checking for predefined/reserved names */ -acpi_status -acpi_ns_check_predefined_names(struct acpi_namespace_node *node, - u32 user_param_count, - acpi_status return_status, - union acpi_operand_object **return_object); +void +acpi_ns_check_argument_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *info); void -acpi_ns_check_parameter_count(char *pathname, +acpi_ns_check_acpi_compliance(char *pathname, struct acpi_namespace_node *node, - u32 user_param_count, - const union acpi_predefined_info *info); + const union acpi_predefined_info *predefined); + +void acpi_ns_check_argument_types(struct acpi_evaluate_info *info); + +/* + * nspredef - Return value checking for predefined/reserved names + */ +acpi_status +acpi_ns_check_return_value(struct acpi_namespace_node *node, + struct acpi_evaluate_info *info, + u32 user_param_count, + acpi_status return_status, + union acpi_operand_object **return_object); acpi_status -acpi_ns_check_object_type(struct acpi_predefined_data *data, +acpi_ns_check_object_type(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr, u32 expected_btypes, u32 package_index); @@ -246,7 +257,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * nsprepkg - Validation of predefined name packages */ acpi_status -acpi_ns_check_package(struct acpi_predefined_data *data, +acpi_ns_check_package(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); /* @@ -308,24 +319,24 @@ acpi_ns_get_attached_data(struct acpi_namespace_node *node, * predefined methods/objects */ acpi_status -acpi_ns_simple_repair(struct acpi_predefined_data *data, +acpi_ns_simple_repair(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_wrap_with_package(struct acpi_predefined_data *data, +acpi_ns_wrap_with_package(struct acpi_evaluate_info *info, union acpi_operand_object *original_object, union acpi_operand_object **obj_desc_ptr); acpi_status -acpi_ns_repair_null_element(struct acpi_predefined_data *data, +acpi_ns_repair_null_element(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr); void -acpi_ns_remove_null_elements(struct acpi_predefined_data *data, +acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, u8 package_type, union acpi_operand_object *obj_desc); @@ -334,7 +345,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, * predefined methods/objects */ acpi_status -acpi_ns_complex_repairs(struct acpi_predefined_data *data, +acpi_ns_complex_repairs(struct acpi_evaluate_info *info, struct acpi_namespace_node *node, acpi_status validate_status, union acpi_operand_object **return_object_ptr); diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index b22b709..f600aded 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -128,8 +128,8 @@ enum acpi_return_package_types { #define ARG_COUNT_IS_MINIMUM 0x8000 #define METHOD_MAX_ARG_TYPE ACPI_TYPE_PACKAGE -#define METHOD_GET_COUNT(arg_list) (arg_list & METHOD_ARG_MASK) -#define METHOD_GET_NEXT_ARG(arg_list) (arg_list >> METHOD_ARG_BIT_WIDTH) +#define METHOD_GET_ARG_COUNT(arg_list) ((arg_list) & METHOD_ARG_MASK) +#define METHOD_GET_NEXT_TYPE(arg_list) (((arg_list) >>= METHOD_ARG_BIT_WIDTH) & METHOD_ARG_MASK) /* Macros used to build the predefined info table */ diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h index 7896d85..fc83c0a 100644 --- a/drivers/acpi/acpica/acstruct.h +++ b/drivers/acpi/acpica/acstruct.h @@ -178,25 +178,41 @@ union acpi_aml_operands { }; /* - * Structure used to pass object evaluation parameters. + * Structure used to pass object evaluation information and parameters. * Purpose is to reduce CPU stack use. */ struct acpi_evaluate_info { - struct acpi_namespace_node *prefix_node; - char *pathname; - union acpi_operand_object *obj_desc; - union acpi_operand_object **parameters; - struct acpi_namespace_node *resolved_node; - union acpi_operand_object *return_object; - u8 param_count; - u8 pass_number; - u8 return_object_type; - u8 flags; + /* The first 3 elements are passed by the caller to acpi_ns_evaluate */ + + struct acpi_namespace_node *prefix_node; /* Input: starting node */ + char *relative_pathname; /* Input: path relative to prefix_node */ + union acpi_operand_object **parameters; /* Input: argument list */ + + struct acpi_namespace_node *node; /* Resolved node (prefix_node:relative_pathname) */ + union acpi_operand_object *obj_desc; /* Object attached to the resolved node */ + char *full_pathname; /* Full pathname of the resolved node */ + + const union acpi_predefined_info *predefined; /* Used if Node is a predefined name */ + union acpi_operand_object *return_object; /* Object returned from the evaluation */ + union acpi_operand_object *parent_package; /* Used if return object is a Package */ + + u32 return_flags; /* Used for return value analysis */ + u32 return_btype; /* Bitmapped type of the returned object */ + u16 param_count; /* Count of the input argument list */ + u8 pass_number; /* Parser pass number */ + u8 return_object_type; /* Object type of the returned object */ + u8 node_flags; /* Same as Node->Flags */ + u8 flags; /* General flags */ }; /* Values for Flags above */ -#define ACPI_IGNORE_RETURN_VALUE 1 +#define ACPI_IGNORE_RETURN_VALUE 1 + +/* Defines for return_flags field above */ + +#define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* Info used by acpi_ns_initialize_devices */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index a493b52..ae50d6c 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -579,7 +579,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) (local_gpe_event_info->dispatch. method_node))); } - break; default: diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 6555e35..8ae8f5b 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -532,7 +532,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) } info->prefix_node = region_obj2->extra.method_REG; - info->pathname = NULL; + info->relative_pathname = NULL; info->parameters = args; info->flags = ACPI_IGNORE_RETURN_VALUE; diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 04c2e16..f4224e6 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -495,7 +495,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) * Evaluate the \_Sx namespace object containing the register values * for this state */ - info->pathname = + info->relative_pathname = ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]); status = acpi_ns_evaluate(info); if (ACPI_FAILURE(status)) { @@ -506,7 +506,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) if (!info->return_object) { ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]", - info->pathname)); + info->relative_pathname)); status = AE_AML_NO_RETURN_VALUE; goto cleanup; } @@ -565,7 +565,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "While evaluating Sleep State [%s]", - info->pathname)); + info->relative_pathname)); } ACPI_FREE(info); diff --git a/drivers/acpi/acpica/nsarguments.c b/drivers/acpi/acpica/nsarguments.c new file mode 100644 index 0000000..74b24c8 --- /dev/null +++ b/drivers/acpi/acpica/nsarguments.c @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * Module Name: nsarguments - Validation of args for ACPI predefined methods + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acnamesp.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nsarguments") + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_types + * + * PARAMETERS: info - Method execution information block + * + * RETURN: None + * + * DESCRIPTION: Check the incoming argument count and all argument types + * against the argument type list for a predefined name. + * + ******************************************************************************/ +void acpi_ns_check_argument_types(struct acpi_evaluate_info *info) +{ + u16 arg_type_list; + u8 arg_count; + u8 arg_type; + u8 user_arg_type; + u32 i; + + /* If not a predefined name, cannot typecheck args */ + + if (!info->predefined) { + return; + } + + arg_type_list = info->predefined->info.argument_list; + arg_count = METHOD_GET_ARG_COUNT(arg_type_list); + + /* Typecheck all arguments */ + + for (i = 0; ((i < arg_count) && (i < info->param_count)); i++) { + arg_type = METHOD_GET_NEXT_TYPE(arg_type_list); + user_arg_type = info->parameters[i]->common.type; + + if (user_arg_type != arg_type) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Argument #%u type mismatch - " + "Found [%s], ACPI requires [%s]", + (i + 1), + acpi_ut_get_type_name + (user_arg_type), + acpi_ut_get_type_name(arg_type))); + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_acpi_compliance + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a + * predefined name is what is expected (matches what is defined in + * the ACPI specification for this predefined name.) + * + ******************************************************************************/ + +void +acpi_ns_check_acpi_compliance(char *pathname, + struct acpi_namespace_node *node, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + return; + } + + /* Get the ACPI-required arg count from the predefined info table */ + + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + /* + * If this object is not a control method, we can check if the ACPI + * spec requires that it be a method. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (required_param_count > 0) { + + /* Object requires args, must be implemented as a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method with %u arguments", + acpi_ut_get_type_name(node-> + type), + required_param_count)); + } else if (!required_param_count + && !predefined->info.expected_btypes) { + + /* Object requires no args and no return value, must be a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method " + "with no arguments and no return value", + acpi_ut_get_type_name(node-> + type))); + } + + return; + } + + /* + * This is a control method. + * Check that the ASL/AML-defined parameter count for this method + * matches the ACPI-required parameter count + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + * + * Note: These are BIOS errors in the declaration of the object + */ + aml_param_count = node->object->method.param_count; + + if (aml_param_count < required_param_count) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } else if ((aml_param_count > required_param_count) + && !(predefined->info. + argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_count + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * user_param_count - Number of args passed in by the caller + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that incoming argument count matches the declared + * parameter count (in the ASL/AML) for an object. + * + ******************************************************************************/ + +void +acpi_ns_check_argument_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + /* + * Not a predefined name. Check the incoming user argument count + * against the count that is specified in the method/object. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (user_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "%u arguments were passed to a non-method ACPI object (%s)", + user_param_count, + acpi_ut_get_type_name + (node->type))); + } + + return; + } + + /* + * This is a control method. Check the parameter count. + * We can only check the incoming argument count against the + * argument count declared for the method in the ASL/AML. + * + * Emit a message if too few or too many arguments have been passed + * by the caller. + * + * Note: Too many arguments will not cause the method to + * fail. However, the method will fail if there are too few + * arguments and the method attempts to use one of the missing ones. + */ + aml_param_count = node->object->method.param_count; + + if (user_param_count < aml_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } else if (user_param_count > aml_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } + + return; + } + + /* + * This is a predefined name. Validate the user-supplied parameter + * count against the ACPI specification. We don't validate against + * the method itself because what is important here is that the + * caller is in conformance with the spec. (The arg count for the + * method was checked against the ACPI spec earlier.) + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + */ + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + if (user_param_count < required_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } else if ((user_param_count > required_param_count) && + !(predefined->info.argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } +} diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index b61db69..18108bc 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -61,7 +61,7 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * * PARAMETERS: info - Evaluation info block, contains: * prefix_node - Prefix or Method/Object Node to execute - * pathname - Name of method to execute, If NULL, the + * relative_path - Name of method to execute, If NULL, the * Node is the object to execute * parameters - List of parameters to pass to the method, * terminated by NULL. Params itself may be @@ -82,10 +82,9 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * ******************************************************************************/ -acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) +acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info) { acpi_status status; - struct acpi_namespace_node *node; ACPI_FUNCTION_TRACE(ns_evaluate); @@ -93,83 +92,138 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Initialize the return value to an invalid object */ - - info->return_object = NULL; - info->param_count = 0; - - if (!info->resolved_node) { + if (!info->node) { /* - * Get the actual namespace node for the target object if we need to. - * Handles these cases: + * Get the actual namespace node for the target object if we + * need to. Handles these cases: * - * 1) Null node, Pathname (absolute path) - * 2) Node, Pathname (path relative to Node) - * 3) Node, Null Pathname + * 1) Null node, valid pathname from root (absolute path) + * 2) Node and valid pathname (path relative to Node) + * 3) Node, Null pathname */ - status = acpi_ns_get_node(info->prefix_node, info->pathname, - ACPI_NS_NO_UPSEARCH, - &info->resolved_node); + status = + acpi_ns_get_node(info->prefix_node, info->relative_pathname, + ACPI_NS_NO_UPSEARCH, &info->node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* - * For a method alias, we must grab the actual method node so that proper - * scoping context will be established before execution. + * For a method alias, we must grab the actual method node so that + * proper scoping context will be established before execution. */ - if (acpi_ns_get_type(info->resolved_node) == - ACPI_TYPE_LOCAL_METHOD_ALIAS) { - info->resolved_node = + if (acpi_ns_get_type(info->node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) { + info->node = ACPI_CAST_PTR(struct acpi_namespace_node, - info->resolved_node->object); + info->node->object); + } + + /* Complete the info block initialization */ + + info->return_object = NULL; + info->node_flags = info->node->flags; + info->obj_desc = acpi_ns_get_attached_object(info->node); + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", + info->relative_pathname, info->node, + acpi_ns_get_attached_object(info->node))); + + /* Get info if we have a predefined name (_HID, etc.) */ + + info->predefined = + acpi_ut_match_predefined_method(info->node->name.ascii); + + /* Get the full pathname to the object, for use in warning messages */ + + info->full_pathname = acpi_ns_get_external_pathname(info->node); + if (!info->full_pathname) { + return_ACPI_STATUS(AE_NO_MEMORY); } - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", info->pathname, - info->resolved_node, - acpi_ns_get_attached_object(info->resolved_node))); + /* Count the number of arguments being passed in */ + + info->param_count = 0; + if (info->parameters) { + while (info->parameters[info->param_count]) { + info->param_count++; + } + + /* Warn on impossible argument count */ + + if (info->param_count > ACPI_METHOD_NUM_ARGS) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Excess arguments (%u) - using only %u", + info->param_count, + ACPI_METHOD_NUM_ARGS)); + + info->param_count = ACPI_METHOD_NUM_ARGS; + } + } + + /* + * For predefined names: Check that the declared argument count + * matches the ACPI spec -- otherwise this is a BIOS error. + */ + acpi_ns_check_acpi_compliance(info->full_pathname, info->node, + info->predefined); + + /* + * For all names: Check that the incoming argument count for + * this method/object matches the actual ASL/AML definition. + */ + acpi_ns_check_argument_count(info->full_pathname, info->node, + info->param_count, info->predefined); - node = info->resolved_node; + /* For predefined names: Typecheck all incoming arguments */ + + acpi_ns_check_argument_types(info); /* - * Two major cases here: + * Three major evaluation cases: * - * 1) The object is a control method -- execute it - * 2) The object is not a method -- just return it's current value + * 1) Object types that cannot be evaluated by definition + * 2) The object is a control method -- execute it + * 3) The object is not a method -- just return it's current value */ - if (acpi_ns_get_type(info->resolved_node) == ACPI_TYPE_METHOD) { + switch (acpi_ns_get_type(info->node)) { + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_EVENT: + case ACPI_TYPE_MUTEX: + case ACPI_TYPE_REGION: + case ACPI_TYPE_THERMAL: + case ACPI_TYPE_LOCAL_SCOPE: + /* + * 1) Disallow evaluation of certain object types. For these, + * object evaluation is undefined and not supported. + */ + ACPI_ERROR((AE_INFO, + "%s: Evaluation of object type [%s] is not supported", + info->full_pathname, + acpi_ut_get_type_name(info->node->type))); + + status = AE_TYPE; + goto cleanup; + + case ACPI_TYPE_METHOD: /* - * 1) Object is a control method - execute it + * 2) Object is a control method - execute it */ /* Verify that there is a method object associated with this node */ - info->obj_desc = - acpi_ns_get_attached_object(info->resolved_node); if (!info->obj_desc) { ACPI_ERROR((AE_INFO, - "Control method has no attached sub-object")); - return_ACPI_STATUS(AE_NULL_OBJECT); + "%s: Method has no attached sub-object", + info->full_pathname)); + status = AE_NULL_OBJECT; + goto cleanup; } - /* Count the number of arguments being passed to the method */ - - if (info->parameters) { - while (info->parameters[info->param_count]) { - if (info->param_count > ACPI_METHOD_MAX_ARG) { - return_ACPI_STATUS(AE_LIMIT); - } - info->param_count++; - } - } - - - ACPI_DUMP_PATHNAME(info->resolved_node, "ACPI: Execute Method", - ACPI_LV_INFO, _COMPONENT); - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Method at AML address %p Length %X\n", + "**** Execute method [%s] at AML address %p length %X\n", + info->full_pathname, info->obj_desc->method.aml_start + 1, info->obj_desc->method.aml_length - 1)); @@ -184,81 +238,61 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) acpi_ex_enter_interpreter(); status = acpi_ps_execute_method(info); acpi_ex_exit_interpreter(); - } else { + break; + + default: /* - * 2) Object is not a method, return its current value - * - * Disallow certain object types. For these, "evaluation" is undefined. + * 3) All other non-method objects -- get the current object value */ - switch (info->resolved_node->type) { - case ACPI_TYPE_DEVICE: - case ACPI_TYPE_EVENT: - case ACPI_TYPE_MUTEX: - case ACPI_TYPE_REGION: - case ACPI_TYPE_THERMAL: - case ACPI_TYPE_LOCAL_SCOPE: - - ACPI_ERROR((AE_INFO, - "[%4.4s] Evaluation of object type [%s] is not supported", - info->resolved_node->name.ascii, - acpi_ut_get_type_name(info->resolved_node-> - type))); - - return_ACPI_STATUS(AE_TYPE); - - default: - break; - } /* - * Objects require additional resolution steps (e.g., the Node may be - * a field that must be read, etc.) -- we can't just grab the object - * out of the node. + * Some objects require additional resolution steps (e.g., the Node + * may be a field that must be read, etc.) -- we can't just grab + * the object out of the node. * * Use resolve_node_to_value() to get the associated value. * * NOTE: we can get away with passing in NULL for a walk state because - * resolved_node is guaranteed to not be a reference to either a method + * the Node is guaranteed to not be a reference to either a method * local or a method argument (because this interface is never called * from a running method.) * * Even though we do not directly invoke the interpreter for object - * resolution, we must lock it because we could access an opregion. - * The opregion access code assumes that the interpreter is locked. + * resolution, we must lock it because we could access an op_region. + * The op_region access code assumes that the interpreter is locked. */ acpi_ex_enter_interpreter(); - /* Function has a strange interface */ + /* TBD: resolve_node_to_value has a strange interface, fix */ + + info->return_object = + ACPI_CAST_PTR(union acpi_operand_object, info->node); status = - acpi_ex_resolve_node_to_value(&info->resolved_node, NULL); + acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR + (struct acpi_namespace_node, + &info->return_object), NULL); acpi_ex_exit_interpreter(); - /* - * If acpi_ex_resolve_node_to_value() succeeded, the return value was placed - * in resolved_node. - */ - if (ACPI_SUCCESS(status)) { - status = AE_CTRL_RETURN_VALUE; - info->return_object = - ACPI_CAST_PTR(union acpi_operand_object, - info->resolved_node); - - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, - "Returning object %p [%s]\n", - info->return_object, - acpi_ut_get_object_type_name(info-> - return_object))); + if (ACPI_FAILURE(status)) { + goto cleanup; } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Returned object %p [%s]\n", + info->return_object, + acpi_ut_get_object_type_name(info-> + return_object))); + + status = AE_CTRL_RETURN_VALUE; /* Always has a "return value" */ + break; } /* - * Check input argument count against the ASL-defined count for a method. - * Also check predefined names: argument count and return value against - * the ACPI specification. Some incorrect return value types are repaired. + * For predefined names, check the return value against the ACPI + * specification. Some incorrect return value types are repaired. */ - (void)acpi_ns_check_predefined_names(node, info->param_count, - status, &info->return_object); + (void)acpi_ns_check_return_value(info->node, info, info->param_count, + status, &info->return_object); /* Check if there is a return value that must be dealt with */ @@ -278,12 +312,15 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "*** Completed evaluation of object %s ***\n", - info->pathname)); + info->relative_pathname)); + cleanup: /* * Namespace was unlocked by the handling acpi_ns* function, so we - * just return + * just free the pathname and return */ + ACPI_FREE(info->full_pathname); + info->full_pathname = NULL; return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 46f0f83..23e426f 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -176,7 +176,7 @@ acpi_status acpi_ns_initialize_devices(void) * part of the ACPI specification. */ info.evaluate_info->prefix_node = acpi_gbl_root_node; - info.evaluate_info->pathname = METHOD_NAME__INI; + info.evaluate_info->relative_pathname = METHOD_NAME__INI; info.evaluate_info->parameters = NULL; info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE; @@ -560,7 +560,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info)); info->prefix_node = device_node; - info->pathname = METHOD_NAME__INI; + info->relative_pathname = METHOD_NAME__INI; info->parameters = NULL; info->flags = ACPI_IGNORE_RETURN_VALUE; @@ -574,8 +574,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, /* Ignore error and move on to next device */ - char *scope_name = - acpi_ns_get_external_pathname(info->resolved_node); + char *scope_name = acpi_ns_get_external_pathname(info->node); ACPI_EXCEPTION((AE_INFO, status, "during %s._INI execution", scope_name)); diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 8a52916..7ab7ddb 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -61,28 +61,29 @@ ACPI_MODULE_NAME("nspredef") * There are several areas that are validated: * * 1) The number of input arguments as defined by the method/object in the - * ASL is validated against the ACPI specification. + * ASL is validated against the ACPI specification. * 2) The type of the return object (if any) is validated against the ACPI - * specification. + * specification. * 3) For returned package objects, the count of package elements is - * validated, as well as the type of each package element. Nested - * packages are supported. + * validated, as well as the type of each package element. Nested + * packages are supported. * * For any problems found, a warning message is issued. * ******************************************************************************/ /* Local prototypes */ static acpi_status -acpi_ns_check_reference(struct acpi_predefined_data *data, +acpi_ns_check_reference(struct acpi_evaluate_info *info, union acpi_operand_object *return_object); static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object); /******************************************************************************* * - * FUNCTION: acpi_ns_check_predefined_names + * FUNCTION: acpi_ns_check_return_value * * PARAMETERS: node - Namespace node for the method/object + * info - Method execution information block * user_param_count - Number of parameters actually passed * return_status - Status from the object evaluation * return_object_ptr - Pointer to the object returned from the @@ -90,44 +91,28 @@ static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object); * * RETURN: Status * - * DESCRIPTION: Check an ACPI name for a match in the predefined name list. + * DESCRIPTION: Check the value returned from a predefined name. * ******************************************************************************/ acpi_status -acpi_ns_check_predefined_names(struct acpi_namespace_node *node, - u32 user_param_count, - acpi_status return_status, - union acpi_operand_object **return_object_ptr) +acpi_ns_check_return_value(struct acpi_namespace_node *node, + struct acpi_evaluate_info *info, + u32 user_param_count, + acpi_status return_status, + union acpi_operand_object **return_object_ptr) { - acpi_status status = AE_OK; + acpi_status status; const union acpi_predefined_info *predefined; char *pathname; - struct acpi_predefined_data *data; - - /* Match the name for this method/object against the predefined list */ - - predefined = acpi_ut_match_predefined_method(node->name.ascii); - /* Get the full pathname to the object, for use in warning messages */ - - pathname = acpi_ns_get_external_pathname(node); - if (!pathname) { - return (AE_OK); /* Could not get pathname, ignore */ - } - - /* - * Check that the parameter count for this method matches the ASL - * definition. For predefined names, ensure that both the caller and - * the method itself are in accordance with the ACPI specification. - */ - acpi_ns_check_parameter_count(pathname, node, user_param_count, - predefined); + predefined = info->predefined; + pathname = info->full_pathname; /* If not a predefined name, we cannot validate the return object */ if (!predefined) { - goto cleanup; + return (AE_OK); } /* @@ -135,7 +120,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * validate the return object */ if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) { - goto cleanup; + return (AE_OK); } /* @@ -154,25 +139,14 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, if (acpi_gbl_disable_auto_repair || (!predefined->info.expected_btypes) || (predefined->info.expected_btypes == ACPI_RTYPE_ALL)) { - goto cleanup; - } - - /* Create the parameter data block for object validation */ - - data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data)); - if (!data) { - goto cleanup; + return (AE_OK); } - data->predefined = predefined; - data->node = node; - data->node_flags = node->flags; - data->pathname = pathname; /* * Check that the type of the main return object is what is expected * for this predefined name */ - status = acpi_ns_check_object_type(data, return_object_ptr, + status = acpi_ns_check_object_type(info, return_object_ptr, predefined->info.expected_btypes, ACPI_NOT_PACKAGE_ELEMENT); if (ACPI_FAILURE(status)) { @@ -184,8 +158,8 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * Note: Package may have been newly created by call above. */ if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) { - data->parent_package = *return_object_ptr; - status = acpi_ns_check_package(data, return_object_ptr); + info->parent_package = *return_object_ptr; + status = acpi_ns_check_package(info, return_object_ptr); if (ACPI_FAILURE(status)) { goto exit; } @@ -199,7 +173,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * performed on a per-name basis, i.e., the code is specific to * particular predefined names. */ - status = acpi_ns_complex_repairs(data, node, status, return_object_ptr); + status = acpi_ns_complex_repairs(info, node, status, return_object_ptr); exit: /* @@ -207,112 +181,18 @@ exit: * or more objects, mark the parent node to suppress further warning * messages during the next evaluation of the same method/object. */ - if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) { + if (ACPI_FAILURE(status) || (info->return_flags & ACPI_OBJECT_REPAIRED)) { node->flags |= ANOBJ_EVALUATED; } - ACPI_FREE(data); -cleanup: - ACPI_FREE(pathname); return (status); } /******************************************************************************* * - * FUNCTION: acpi_ns_check_parameter_count - * - * PARAMETERS: pathname - Full pathname to the node (for error msgs) - * node - Namespace node for the method/object - * user_param_count - Number of args passed in by the caller - * predefined - Pointer to entry in predefined name table - * - * RETURN: None - * - * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a - * predefined name is what is expected (i.e., what is defined in - * the ACPI specification for this predefined name.) - * - ******************************************************************************/ - -void -acpi_ns_check_parameter_count(char *pathname, - struct acpi_namespace_node *node, - u32 user_param_count, - const union acpi_predefined_info *predefined) -{ - u32 param_count; - u32 required_params_current; - u32 required_params_old; - - /* Methods have 0-7 parameters. All other types have zero. */ - - param_count = 0; - if (node->type == ACPI_TYPE_METHOD) { - param_count = node->object->method.param_count; - } - - if (!predefined) { - /* - * Check the parameter count for non-predefined methods/objects. - * - * Warning if too few or too many arguments have been passed by the - * caller. An incorrect number of arguments may not cause the method - * to fail. However, the method will fail if there are too few - * arguments and the method attempts to use one of the missing ones. - */ - if (user_param_count < param_count) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Insufficient arguments - needs %u, found %u", - param_count, user_param_count)); - } else if (user_param_count > param_count) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Excess arguments - needs %u, found %u", - param_count, user_param_count)); - } - return; - } - - /* - * Validate the user-supplied parameter count. - * Allow two different legal argument counts (_SCP, etc.) - */ - required_params_current = - predefined->info.argument_list & METHOD_ARG_MASK; - required_params_old = - predefined->info.argument_list >> METHOD_ARG_BIT_WIDTH; - - if (user_param_count != ACPI_UINT32_MAX) { - if ((user_param_count != required_params_current) && - (user_param_count != required_params_old)) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Parameter count mismatch - " - "caller passed %u, ACPI requires %u", - user_param_count, - required_params_current)); - } - } - - /* - * Check that the ASL-defined parameter count is what is expected for - * this predefined name (parameter count as defined by the ACPI - * specification) - */ - if ((param_count != required_params_current) && - (param_count != required_params_old)) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags, - "Parameter count mismatch - ASL declared %u, ACPI requires %u", - param_count, required_params_current)); - } -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_check_object_type * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * expected_btypes - Bitmap of expected return type(s) @@ -328,7 +208,7 @@ acpi_ns_check_parameter_count(char *pathname, ******************************************************************************/ acpi_status -acpi_ns_check_object_type(struct acpi_predefined_data *data, +acpi_ns_check_object_type(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr, u32 expected_btypes, u32 package_index) { @@ -340,7 +220,8 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, if (return_object && ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid return type - Found a Namespace node [%4.4s] type %s", return_object->node.name.ascii, acpi_ut_get_type_name(return_object->node. @@ -356,8 +237,8 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * from all of the predefined names (including elements of returned * packages) */ - data->return_btype = acpi_ns_get_bitmapped_type(return_object); - if (data->return_btype == ACPI_RTYPE_ANY) { + info->return_btype = acpi_ns_get_bitmapped_type(return_object); + if (info->return_btype == ACPI_RTYPE_ANY) { /* Not one of the supported objects, must be incorrect */ goto type_error_exit; @@ -365,16 +246,18 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, /* For reference objects, check that the reference type is correct */ - if ((data->return_btype & expected_btypes) == ACPI_RTYPE_REFERENCE) { - status = acpi_ns_check_reference(data, return_object); + if ((info->return_btype & expected_btypes) == ACPI_RTYPE_REFERENCE) { + status = acpi_ns_check_reference(info, return_object); return (status); } /* Attempt simple repair of the returned object if necessary */ - status = acpi_ns_simple_repair(data, expected_btypes, + status = acpi_ns_simple_repair(info, expected_btypes, package_index, return_object_ptr); - return (status); + if (ACPI_SUCCESS(status)) { + return (AE_OK); /* Successful repair */ + } type_error_exit: @@ -383,12 +266,14 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, acpi_ut_get_expected_return_types(type_buffer, expected_btypes); if (package_index == ACPI_NOT_PACKAGE_ELEMENT) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return type mismatch - found %s, expected %s", acpi_ut_get_object_type_name (return_object), type_buffer)); } else { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return Package type mismatch at index %u - " "found %s, expected %s", package_index, acpi_ut_get_object_type_name @@ -402,7 +287,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_reference * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object - Object returned from the evaluation of a * method or object * @@ -415,7 +300,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_reference(struct acpi_predefined_data *data, +acpi_ns_check_reference(struct acpi_evaluate_info *info, union acpi_operand_object *return_object) { @@ -428,7 +313,7 @@ acpi_ns_check_reference(struct acpi_predefined_data *data, return (AE_OK); } - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return type mismatch - unexpected reference object type [%s] %2.2X", acpi_ut_get_reference_name(return_object), return_object->reference.class)); diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c index 77cdd53..ab2a3f4 100644 --- a/drivers/acpi/acpica/nsprepkg.c +++ b/drivers/acpi/acpica/nsprepkg.c @@ -51,12 +51,12 @@ ACPI_MODULE_NAME("nsprepkg") /* Local prototypes */ static acpi_status -acpi_ns_check_package_list(struct acpi_predefined_data *data, +acpi_ns_check_package_list(struct acpi_evaluate_info *info, const union acpi_predefined_info *package, union acpi_operand_object **elements, u32 count); static acpi_status -acpi_ns_check_package_elements(struct acpi_predefined_data *data, +acpi_ns_check_package_elements(struct acpi_evaluate_info *info, union acpi_operand_object **elements, u8 type1, u32 count1, @@ -66,7 +66,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -78,7 +78,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, ******************************************************************************/ acpi_status -acpi_ns_check_package(struct acpi_predefined_data *data, +acpi_ns_check_package(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -93,18 +93,18 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* The package info for this name is in the next table entry */ - package = data->predefined + 1; + package = info->predefined + 1; ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s Validating return Package of Type %X, Count %X\n", - data->pathname, package->ret_info.type, + info->full_pathname, package->ret_info.type, return_object->package.count)); /* * For variable-length Packages, we can safely remove all embedded * and trailing NULL package elements */ - acpi_ns_remove_null_elements(data, package->ret_info.type, + acpi_ns_remove_null_elements(info, package->ret_info.type, return_object); /* Extract package count and elements array */ @@ -121,7 +121,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, return (AE_OK); } - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return Package has no elements (empty)")); return (AE_AML_OPERAND_VALUE); @@ -150,13 +151,13 @@ acpi_ns_check_package(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Return Package is larger than needed - " "found %u, expected %u\n", - data->pathname, count, + info->full_pathname, count, expected_count)); } /* Validate all elements of the returned package */ - status = acpi_ns_check_package_elements(data, elements, + status = acpi_ns_check_package_elements(info, elements, package->ret_info. object_type1, package->ret_info. @@ -174,7 +175,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, * elements must be of the same type */ for (i = 0; i < count; i++) { - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, package->ret_info. object_type1, i); if (ACPI_FAILURE(status)) { @@ -206,7 +207,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* These are the required package elements (0, 1, or 2) */ status = - acpi_ns_check_object_type(data, elements, + acpi_ns_check_object_type(info, elements, package-> ret_info3. object_type[i], @@ -218,7 +219,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* These are the optional package elements */ status = - acpi_ns_check_object_type(data, elements, + acpi_ns_check_object_type(info, elements, package-> ret_info3. tail_object_type, @@ -235,7 +236,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* First element is the (Integer) revision */ - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { return (status); @@ -247,14 +248,14 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; case ACPI_PTYPE2_PKG_COUNT: /* First element is the (Integer) count of sub-packages to follow */ - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { return (status); @@ -275,7 +276,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; case ACPI_PTYPE2: @@ -300,7 +301,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_wrap_with_package(data, return_object, + acpi_ns_wrap_with_package(info, return_object, return_object_ptr); if (ACPI_FAILURE(status)) { return (status); @@ -316,14 +317,15 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; default: /* Should not get here if predefined info table is correct */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid internal return type in table entry: %X", package->ret_info.type)); @@ -336,7 +338,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Error exit for the case with an incorrect package count */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return Package is too small - found %u elements, expected %u", count, expected_count)); @@ -347,7 +349,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package_list * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * package - Pointer to package-specific info for method * elements - Element list of parent package. All elements * of this list should be of type Package. @@ -360,7 +362,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_package_list(struct acpi_predefined_data *data, +acpi_ns_check_package_list(struct acpi_evaluate_info *info, const union acpi_predefined_info *package, union acpi_operand_object **elements, u32 count) { @@ -381,11 +383,11 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, for (i = 0; i < count; i++) { sub_package = *elements; sub_elements = sub_package->package.elements; - data->parent_package = sub_package; + info->parent_package = sub_package; /* Each sub-object must be of type Package */ - status = acpi_ns_check_object_type(data, &sub_package, + status = acpi_ns_check_object_type(info, &sub_package, ACPI_RTYPE_PACKAGE, i); if (ACPI_FAILURE(status)) { return (status); @@ -393,7 +395,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Examine the different types of expected sub-packages */ - data->parent_package = sub_package; + info->parent_package = sub_package; switch (package->ret_info.type) { case ACPI_PTYPE2: case ACPI_PTYPE2_PKG_COUNT: @@ -408,7 +410,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, } status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, package->ret_info. @@ -434,7 +436,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, } status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, package->ret_info. @@ -463,7 +465,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, for (j = 0; j < expected_count; j++) { status = - acpi_ns_check_object_type(data, + acpi_ns_check_object_type(info, &sub_elements[j], package-> ret_info2. @@ -487,7 +489,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Check the type of each sub-package element */ status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, sub_package->package. @@ -503,7 +505,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, * First element is the (Integer) count of elements, including * the count field (the ACPI name is num_elements) */ - status = acpi_ns_check_object_type(data, sub_elements, + status = acpi_ns_check_object_type(info, sub_elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { @@ -537,7 +539,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Check the type of each sub-package element */ status = - acpi_ns_check_package_elements(data, + acpi_ns_check_package_elements(info, (sub_elements + 1), package->ret_info. object_type1, @@ -562,7 +564,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* The sub-package count was smaller than required */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return Sub-Package[%u] is too small - found %u elements, expected %u", i, sub_package->package.count, expected_count)); @@ -573,7 +575,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package_elements * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * elements - Pointer to the package elements array * type1 - Object type for first group * count1 - Count for first group @@ -589,7 +591,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_package_elements(struct acpi_predefined_data *data, +acpi_ns_check_package_elements(struct acpi_evaluate_info *info, union acpi_operand_object **elements, u8 type1, u32 count1, @@ -605,7 +607,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, * The second group can have a count of zero. */ for (i = 0; i < count1; i++) { - status = acpi_ns_check_object_type(data, this_element, + status = acpi_ns_check_object_type(info, this_element, type1, i + start_index); if (ACPI_FAILURE(status)) { return (status); @@ -614,7 +616,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, } for (i = 0; i < count2; i++) { - status = acpi_ns_check_object_type(data, this_element, + status = acpi_ns_check_object_type(info, this_element, type2, (i + count1 + start_index)); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 18f02e4..89caef0 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -130,7 +130,7 @@ static const struct acpi_simple_repair_info acpi_object_repair_info[] = { * * FUNCTION: acpi_ns_simple_repair * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -146,7 +146,7 @@ static const struct acpi_simple_repair_info acpi_object_repair_info[] = { ******************************************************************************/ acpi_status -acpi_ns_simple_repair(struct acpi_predefined_data *data, +acpi_ns_simple_repair(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr) @@ -162,12 +162,12 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * Special repairs for certain names that are in the repair table. * Check if this name is in the list of repairable names. */ - predefined = acpi_ns_match_simple_repair(data->node, - data->return_btype, + predefined = acpi_ns_match_simple_repair(info->node, + info->return_btype, package_index); if (predefined) { if (!return_object) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, ACPI_WARN_ALWAYS, "Missing expected return value")); } @@ -191,7 +191,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * Do not perform simple object repair unless the return type is not * expected. */ - if (data->return_btype & expected_btypes) { + if (info->return_btype & expected_btypes) { return (AE_OK); } @@ -211,7 +211,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, */ if (!return_object) { if (expected_btypes && (!(expected_btypes & ACPI_RTYPE_NONE))) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, ACPI_WARN_ALWAYS, "Missing expected return value")); @@ -247,14 +247,14 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * for correct contents (expected object type or types). */ status = - acpi_ns_wrap_with_package(data, return_object, &new_object); + acpi_ns_wrap_with_package(info, return_object, &new_object); if (ACPI_SUCCESS(status)) { /* * The original object just had its reference count * incremented for being inserted into the new package. */ *return_object_ptr = new_object; /* New Package object */ - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } } @@ -277,7 +277,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * package object as part of the repair, we don't need to * change the reference count. */ - if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + if (!(info->return_flags & ACPI_OBJECT_WRAPPED)) { new_object->common.reference_count = return_object->common.reference_count; @@ -288,14 +288,14 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted %s to expected %s at Package index %u\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), package_index)); } else { ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted %s to expected %s\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object))); } @@ -304,7 +304,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, acpi_ut_remove_reference(return_object); *return_object_ptr = new_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -359,7 +359,7 @@ static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct * * FUNCTION: acpi_ns_repair_null_element * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -374,7 +374,7 @@ static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct ******************************************************************************/ acpi_status -acpi_ns_repair_null_element(struct acpi_predefined_data *data, +acpi_ns_repair_null_element(struct acpi_evaluate_info * info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr) @@ -424,16 +424,16 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, /* Set the reference count according to the parent Package object */ new_object->common.reference_count = - data->parent_package->common.reference_count; + info->parent_package->common.reference_count; ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted NULL package element to expected %s at index %u\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(new_object), package_index)); *return_object_ptr = new_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -441,7 +441,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_remove_null_elements * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * package_type - An acpi_return_package_types value * obj_desc - A Package object * @@ -454,7 +454,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, *****************************************************************************/ void -acpi_ns_remove_null_elements(struct acpi_predefined_data *data, +acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, u8 package_type, union acpi_operand_object *obj_desc) { @@ -511,7 +511,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, if (new_count < count) { ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Found and removed %u NULL elements\n", - data->pathname, (count - new_count))); + info->full_pathname, (count - new_count))); /* NULL terminate list and update the package count */ @@ -524,7 +524,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_wrap_with_package * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * original_object - Pointer to the object to repair. * obj_desc_ptr - The new package object is returned here * @@ -545,7 +545,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, ******************************************************************************/ acpi_status -acpi_ns_wrap_with_package(struct acpi_predefined_data *data, +acpi_ns_wrap_with_package(struct acpi_evaluate_info *info, union acpi_operand_object *original_object, union acpi_operand_object **obj_desc_ptr) { @@ -566,12 +566,12 @@ acpi_ns_wrap_with_package(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Wrapped %s with expected Package object\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; + info->return_flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 149e9b9..39acc4e 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -54,7 +54,7 @@ ACPI_MODULE_NAME("nsrepair2") * be repaired on a per-name basis. */ typedef -acpi_status(*acpi_repair_function) (struct acpi_predefined_data *data, +acpi_status(*acpi_repair_function) (struct acpi_evaluate_info * info, union acpi_operand_object **return_object_ptr); @@ -71,31 +71,31 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct *node); static acpi_status -acpi_ns_repair_ALR(struct acpi_predefined_data *data, +acpi_ns_repair_ALR(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_CID(struct acpi_predefined_data *data, +acpi_ns_repair_CID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_FDE(struct acpi_predefined_data *data, +acpi_ns_repair_FDE(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_HID(struct acpi_predefined_data *data, +acpi_ns_repair_HID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_PSS(struct acpi_predefined_data *data, +acpi_ns_repair_PSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_TSS(struct acpi_predefined_data *data, +acpi_ns_repair_TSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_check_sorted_list(struct acpi_predefined_data *data, +acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, u32 expected_count, u32 sort_index, @@ -150,7 +150,7 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { * * FUNCTION: acpi_ns_complex_repairs * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * node - Namespace node for the method/object * validate_status - Original status of earlier validation * return_object_ptr - Pointer to the object returned from the @@ -165,7 +165,7 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { *****************************************************************************/ acpi_status -acpi_ns_complex_repairs(struct acpi_predefined_data *data, +acpi_ns_complex_repairs(struct acpi_evaluate_info *info, struct acpi_namespace_node *node, acpi_status validate_status, union acpi_operand_object **return_object_ptr) @@ -180,7 +180,7 @@ acpi_ns_complex_repairs(struct acpi_predefined_data *data, return (validate_status); } - status = predefined->repair_function(data, return_object_ptr); + status = predefined->repair_function(info, return_object_ptr); return (status); } @@ -219,7 +219,7 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct * * FUNCTION: acpi_ns_repair_ALR * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -231,13 +231,13 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct *****************************************************************************/ static acpi_status -acpi_ns_repair_ALR(struct acpi_predefined_data *data, +acpi_ns_repair_ALR(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; acpi_status status; - status = acpi_ns_check_sorted_list(data, return_object, 2, 1, + status = acpi_ns_check_sorted_list(info, return_object, 2, 1, ACPI_SORT_ASCENDING, "AmbientIlluminance"); @@ -248,7 +248,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_FDE * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -262,7 +262,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_FDE(struct acpi_predefined_data *data, +acpi_ns_repair_FDE(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -285,8 +285,8 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, /* We can only repair if we have exactly 5 BYTEs */ if (return_object->buffer.length != ACPI_FDE_BYTE_BUFFER_SIZE) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, - data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Incorrect return buffer length %u, expected %u", return_object->buffer.length, ACPI_FDE_DWORD_BUFFER_SIZE)); @@ -316,7 +316,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s Expanded Byte Buffer to expected DWord Buffer\n", - data->pathname)); + info->full_pathname)); break; default: @@ -328,7 +328,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, acpi_ut_remove_reference(return_object); *return_object_ptr = buffer_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -336,7 +336,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_CID * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -349,7 +349,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_CID(struct acpi_predefined_data *data, +acpi_ns_repair_CID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { acpi_status status; @@ -362,7 +362,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, /* Check for _CID as a simple string */ if (return_object->common.type == ACPI_TYPE_STRING) { - status = acpi_ns_repair_HID(data, return_object_ptr); + status = acpi_ns_repair_HID(info, return_object_ptr); return (status); } @@ -379,7 +379,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, original_element = *element_ptr; original_ref_count = original_element->common.reference_count; - status = acpi_ns_repair_HID(data, element_ptr); + status = acpi_ns_repair_HID(info, element_ptr); if (ACPI_FAILURE(status)) { return (status); } @@ -406,7 +406,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_HID * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -418,7 +418,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_HID(struct acpi_predefined_data *data, +acpi_ns_repair_HID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -435,12 +435,13 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, } if (return_object->string.length == 0) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid zero-length _HID or _CID string")); /* Return AE_OK anyway, let driver handle it */ - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -464,7 +465,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Removed invalid leading asterisk\n", - data->pathname)); + info->full_pathname)); } /* @@ -488,7 +489,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_TSS * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -500,7 +501,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_TSS(struct acpi_predefined_data *data, +acpi_ns_repair_TSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -515,13 +516,13 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data, * In this case, it is best to just return the _TSS package as-is. * (May, 2011) */ - status = - acpi_ns_get_node(data->node, "^_PSS", ACPI_NS_NO_UPSEARCH, &node); + status = acpi_ns_get_node(info->node, "^_PSS", + ACPI_NS_NO_UPSEARCH, &node); if (ACPI_SUCCESS(status)) { return (AE_OK); } - status = acpi_ns_check_sorted_list(data, return_object, 5, 1, + status = acpi_ns_check_sorted_list(info, return_object, 5, 1, ACPI_SORT_DESCENDING, "PowerDissipation"); @@ -532,7 +533,7 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_PSS * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -546,7 +547,7 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_PSS(struct acpi_predefined_data *data, +acpi_ns_repair_PSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -564,7 +565,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, * incorrectly sorted, sort it. We sort by cpu_frequency, since this * should be proportional to the power. */ - status = acpi_ns_check_sorted_list(data, return_object, 6, 0, + status = acpi_ns_check_sorted_list(info, return_object, 6, 0, ACPI_SORT_DESCENDING, "CpuFrequency"); if (ACPI_FAILURE(status)) { @@ -584,8 +585,8 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, obj_desc = elements[1]; /* Index1 = power_dissipation */ if ((u32) obj_desc->integer.value > previous_value) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, - data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "SubPackage[%u,%u] - suspicious power dissipation values", i - 1, i)); } @@ -601,7 +602,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_sorted_list * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object - Pointer to the top-level returned object * expected_count - Minimum length of each sub-package * sort_index - Sub-package entry to sort on @@ -617,7 +618,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_check_sorted_list(struct acpi_predefined_data *data, +acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, u32 expected_count, u32 sort_index, @@ -689,11 +690,11 @@ acpi_ns_check_sorted_list(struct acpi_predefined_data *data, outer_element_count, sort_index, sort_direction); - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Repaired unsorted list - now sorted by %s\n", - data->pathname, sort_key_name)); + info->full_pathname, sort_key_name)); return (AE_OK); } diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index fc69949..82bec40 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -187,8 +187,6 @@ acpi_evaluate_object(acpi_handle handle, return_ACPI_STATUS(AE_NO_MEMORY); } - info->pathname = pathname; - /* Convert and validate the device handle */ info->prefix_node = acpi_ns_validate_handle(handle); @@ -198,17 +196,64 @@ acpi_evaluate_object(acpi_handle handle, } /* - * If there are parameters to be passed to a control method, the external - * objects must all be converted to internal objects + * Get the actual namespace node for the target object. + * Handles these cases: + * + * 1) Null node, valid pathname from root (absolute path) + * 2) Node and valid pathname (path relative to Node) + * 3) Node, Null pathname + */ + if ((pathname) && (ACPI_IS_ROOT_PREFIX(pathname[0]))) { + + /* The path is fully qualified, just evaluate by name */ + + info->prefix_node = NULL; + } else if (!handle) { + /* + * A handle is optional iff a fully qualified pathname is specified. + * Since we've already handled fully qualified names above, this is + * an error. + */ + if (!pathname) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Both Handle and Pathname are NULL")); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Null Handle with relative pathname [%s]", + pathname)); + } + + status = AE_BAD_PARAMETER; + goto cleanup; + } + + info->relative_pathname = pathname; + + /* + * Convert all external objects passed as arguments to the + * internal version(s). */ if (external_params && external_params->count) { + info->param_count = (u16)external_params->count; + + /* Warn on impossible argument count */ + + if (info->param_count > ACPI_METHOD_NUM_ARGS) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Excess arguments (%u) - using only %u", + info->param_count, + ACPI_METHOD_NUM_ARGS)); + + info->param_count = ACPI_METHOD_NUM_ARGS; + } + /* * Allocate a new parameter block for the internal objects * Add 1 to count to allow for null terminated internal list */ - info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) - external_params-> - count + + info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) info-> + param_count + 1) * sizeof(void *)); if (!info->parameters) { status = AE_NO_MEMORY; @@ -217,7 +262,7 @@ acpi_evaluate_object(acpi_handle handle, /* Convert each external object in the list to an internal object */ - for (i = 0; i < external_params->count; i++) { + for (i = 0; i < info->param_count; i++) { status = acpi_ut_copy_eobject_to_iobject(&external_params-> pointer[i], @@ -227,43 +272,96 @@ acpi_evaluate_object(acpi_handle handle, goto cleanup; } } - info->parameters[external_params->count] = NULL; + + info->parameters[info->param_count] = NULL; } +#if 0 + /* - * Three major cases: - * 1) Fully qualified pathname - * 2) No handle, not fully qualified pathname (error) - * 3) Valid handle + * Begin incoming argument count analysis. Check for too few args + * and too many args. */ - if ((pathname) && (ACPI_IS_ROOT_PREFIX(pathname[0]))) { - /* The path is fully qualified, just evaluate by name */ + switch (acpi_ns_get_type(info->node)) { + case ACPI_TYPE_METHOD: + + /* Check incoming argument count against the method definition */ + + if (info->obj_desc->method.param_count > info->param_count) { + ACPI_ERROR((AE_INFO, + "Insufficient arguments (%u) - %u are required", + info->param_count, + info->obj_desc->method.param_count)); + + status = AE_MISSING_ARGUMENTS; + goto cleanup; + } + + else if (info->obj_desc->method.param_count < info->param_count) { + ACPI_WARNING((AE_INFO, + "Excess arguments (%u) - only %u are required", + info->param_count, + info->obj_desc->method.param_count)); + + /* Just pass the required number of arguments */ + + info->param_count = info->obj_desc->method.param_count; + } - info->prefix_node = NULL; - status = acpi_ns_evaluate(info); - } else if (!handle) { /* - * A handle is optional iff a fully qualified pathname is specified. - * Since we've already handled fully qualified names above, this is - * an error + * Any incoming external objects to be passed as arguments to the + * method must be converted to internal objects */ - if (!pathname) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Both Handle and Pathname are NULL")); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Null Handle with relative pathname [%s]", - pathname)); + if (info->param_count) { + /* + * Allocate a new parameter block for the internal objects + * Add 1 to count to allow for null terminated internal list + */ + info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) + info-> + param_count + + 1) * + sizeof(void *)); + if (!info->parameters) { + status = AE_NO_MEMORY; + goto cleanup; + } + + /* Convert each external object in the list to an internal object */ + + for (i = 0; i < info->param_count; i++) { + status = + acpi_ut_copy_eobject_to_iobject + (&external_params->pointer[i], + &info->parameters[i]); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + } + + info->parameters[info->param_count] = NULL; } + break; - status = AE_BAD_PARAMETER; - } else { - /* We have a namespace a node and a possible relative path */ + default: - status = acpi_ns_evaluate(info); + /* Warn if arguments passed to an object that is not a method */ + + if (info->param_count) { + ACPI_WARNING((AE_INFO, + "%u arguments were passed to a non-method ACPI object", + info->param_count)); + } + break; } +#endif + + /* Now we can evaluate the object */ + + status = acpi_ns_evaluate(info); + /* * If we are expecting a return value, and all went well above, * copy the return value to an external object. diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c index f682542..11b99ab 100644 --- a/drivers/acpi/acpica/psxface.c +++ b/drivers/acpi/acpica/psxface.c @@ -125,7 +125,7 @@ static void acpi_ps_start_trace(struct acpi_evaluate_info *info) } if ((!acpi_gbl_trace_method_name) || - (acpi_gbl_trace_method_name != info->resolved_node->name.integer)) { + (acpi_gbl_trace_method_name != info->node->name.integer)) { goto exit; } @@ -170,7 +170,7 @@ static void acpi_ps_stop_trace(struct acpi_evaluate_info *info) } if ((!acpi_gbl_trace_method_name) || - (acpi_gbl_trace_method_name != info->resolved_node->name.integer)) { + (acpi_gbl_trace_method_name != info->node->name.integer)) { goto exit; } @@ -226,15 +226,14 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) /* Validate the Info and method Node */ - if (!info || !info->resolved_node) { + if (!info || !info->node) { return_ACPI_STATUS(AE_NULL_ENTRY); } /* Init for new method, wait on concurrency semaphore */ status = - acpi_ds_begin_method_execution(info->resolved_node, info->obj_desc, - NULL); + acpi_ds_begin_method_execution(info->node, info->obj_desc, NULL); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -253,8 +252,7 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Begin Method Parse/Execute [%4.4s] **** Node=%p Obj=%p\n", - info->resolved_node->name.ascii, info->resolved_node, - info->obj_desc)); + info->node->name.ascii, info->node, info->obj_desc)); /* Create and init a Root Node */ @@ -275,7 +273,7 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) goto cleanup; } - status = acpi_ds_init_aml_walk(walk_state, op, info->resolved_node, + status = acpi_ds_init_aml_walk(walk_state, op, info->node, info->obj_desc->method.aml_start, info->obj_desc->method.aml_length, info, info->pass_number); diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index a44953c..59bdf37 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -736,7 +736,7 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, } info->prefix_node = node; - info->pathname = METHOD_NAME__SRS; + info->relative_pathname = METHOD_NAME__SRS; info->parameters = args; info->flags = ACPI_IGNORE_RETURN_VALUE; diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index c3f3a7e..1673ddd 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -87,7 +87,7 @@ acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node, } info->prefix_node = prefix_node; - info->pathname = path; + info->relative_pathname = path; /* Evaluate the object/method */ diff --git a/drivers/acpi/acpica/utpredef.c b/drivers/acpi/acpica/utpredef.c index 2945947..2b1ce4c 100644 --- a/drivers/acpi/acpica/utpredef.c +++ b/drivers/acpi/acpica/utpredef.c @@ -147,6 +147,11 @@ void acpi_ut_get_expected_return_types(char *buffer, u32 expected_btypes) u32 i; u32 j; + if (!expected_btypes) { + ACPI_STRCPY(buffer, "NONE"); + return; + } + j = 1; buffer[0] = 0; this_rtype = ACPI_RTYPE_INTEGER; @@ -328,9 +333,7 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) /* First field in the types list is the count of args to follow */ - arg_count = (argument_types & METHOD_ARG_MASK); - argument_types >>= METHOD_ARG_BIT_WIDTH; - + arg_count = METHOD_GET_ARG_COUNT(argument_types); if (arg_count > METHOD_PREDEF_ARGS_MAX) { printf("**** Invalid argument count (%u) " "in predefined info structure\n", arg_count); @@ -340,7 +343,8 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) /* Get each argument from the list, convert to ascii, store to buffer */ for (i = 0; i < arg_count; i++) { - this_argument_type = (argument_types & METHOD_ARG_MASK); + this_argument_type = METHOD_GET_NEXT_TYPE(argument_types); + if (!this_argument_type || (this_argument_type > METHOD_MAX_ARG_TYPE)) { printf("**** Invalid argument type (%u) " @@ -351,10 +355,6 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) strcat(buffer, ut_external_type_names[this_argument_type] + sub_index); - - /* Shift to next argument type field */ - - argument_types >>= METHOD_ARG_BIT_WIDTH; sub_index = 0; } diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 14ceff7..1c16f82 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -219,8 +219,8 @@ * *****************************************************************************/ -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ -#define ACPI_DB_LINE_BUFFER_SIZE 512 +#define ACPI_DEBUGGER_MAX_ARGS ACPI_METHOD_NUM_ARGS + 4 /* Max command line arguments */ +#define ACPI_DB_LINE_BUFFER_SIZE 512 #define ACPI_DEBUGGER_COMMAND_PROMPT '-' #define ACPI_DEBUGGER_EXECUTE_PROMPT '%' -- cgit v0.10.2 From 43e5318f34f2cafd8734ac20d0e7bb0dd5c2538e Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 30 May 2013 10:00:53 +0800 Subject: ACPICA: Predefined name support: Remove unused local variable "Pathname" is no longer used. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 7ab7ddb..5c83a8b 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -104,13 +104,10 @@ acpi_ns_check_return_value(struct acpi_namespace_node *node, { acpi_status status; const union acpi_predefined_info *predefined; - char *pathname; - - predefined = info->predefined; - pathname = info->full_pathname; /* If not a predefined name, we cannot validate the return object */ + predefined = info->predefined; if (!predefined) { return (AE_OK); } -- cgit v0.10.2 From d835e7f4f87e783575a44b1322f8a3d95f52ef5e Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 30 May 2013 10:01:05 +0800 Subject: ACPICA: Remove unused macros, no functional change Remove several unused/duplicated macros in acoutput.h Lv Zheng. Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 4f52ea7..4607b02 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -428,27 +428,21 @@ * This is the non-debug case -- make everything go away, * leaving no executable debug code! */ -#define ACPI_FUNCTION_NAME(a) #define ACPI_DEBUG_PRINT(pl) #define ACPI_DEBUG_PRINT_RAW(pl) #define ACPI_DEBUG_EXEC(a) #define ACPI_DEBUG_ONLY_MEMBERS(a) +#define ACPI_FUNCTION_NAME(a) #define ACPI_FUNCTION_TRACE(a) #define ACPI_FUNCTION_TRACE_PTR(a, b) #define ACPI_FUNCTION_TRACE_U32(a, b) #define ACPI_FUNCTION_TRACE_STR(a, b) -#define ACPI_FUNCTION_EXIT -#define ACPI_FUNCTION_STATUS_EXIT(s) -#define ACPI_FUNCTION_VALUE_EXIT(s) #define ACPI_FUNCTION_ENTRY() #define ACPI_DUMP_STACK_ENTRY(a) #define ACPI_DUMP_OPERANDS(a, b, c) #define ACPI_DUMP_ENTRY(a, b) -#define ACPI_DUMP_TABLES(a, b) #define ACPI_DUMP_PATHNAME(a, b, c, d) #define ACPI_DUMP_BUFFER(a, b) -#define ACPI_DEBUG_PRINT(pl) -#define ACPI_DEBUG_PRINT_RAW(pl) #define ACPI_IS_DEBUG_ENABLED(level, component) 0 /* Return macros must have a return statement at the minimum */ -- cgit v0.10.2 From 8f4f5e781554493230ce9b2d5a979eef637aa109 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 30 May 2013 10:02:13 +0800 Subject: ACPICA: Update for "orphan" embedded controller _REG method support This refers to _REG methods under the EC device that have no corresponding operation region. This is allowed by the ACPI specification. This update removes a dependency on having an ECDT table, and will execute an orphan _REG method as long as the handler for the EC is installed at the EC device node (not the namespace root). Rui Zhang (original update), Bob Moore (update/integrate). Signed-off-by: Zhang Rui Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 8ae8f5b..cea14d6 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -54,7 +54,8 @@ extern u8 acpi_gbl_default_address_spaces[]; /* Local prototypes */ -static void acpi_ev_orphan_ec_reg_method(void); +static void +acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node); static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, @@ -612,7 +613,7 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, /* Special case for EC: handle "orphan" _REG methods with no region */ if (space_id == ACPI_ADR_SPACE_EC) { - acpi_ev_orphan_ec_reg_method(); + acpi_ev_orphan_ec_reg_method(node); } return_ACPI_STATUS(status); @@ -681,7 +682,7 @@ acpi_ev_reg_run(acpi_handle obj_handle, * * FUNCTION: acpi_ev_orphan_ec_reg_method * - * PARAMETERS: None + * PARAMETERS: ec_device_node - Namespace node for an EC device * * RETURN: None * @@ -693,37 +694,27 @@ acpi_ev_reg_run(acpi_handle obj_handle, * detected by providing a _REG method object underneath the * Embedded Controller device." * - * To quickly access the EC device, we use the EC_ID that appears - * within the ECDT. Otherwise, we would need to perform a time- - * consuming namespace walk, executing _HID methods to find the - * EC device. + * To quickly access the EC device, we use the ec_device_node used + * during EC handler installation. Otherwise, we would need to + * perform a time consuming namespace walk, executing _HID + * methods to find the EC device. + * + * MUTEX: Assumes the namespace is locked * ******************************************************************************/ -static void acpi_ev_orphan_ec_reg_method(void) +static void +acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node) { - struct acpi_table_ecdt *table; + acpi_handle reg_method; + struct acpi_namespace_node *next_node; acpi_status status; struct acpi_object_list args; union acpi_object objects[2]; - struct acpi_namespace_node *ec_device_node; - struct acpi_namespace_node *reg_method; - struct acpi_namespace_node *next_node; ACPI_FUNCTION_TRACE(ev_orphan_ec_reg_method); - /* Get the ECDT (if present in system) */ - - status = acpi_get_table(ACPI_SIG_ECDT, 0, - ACPI_CAST_INDIRECT_PTR(struct acpi_table_header, - &table)); - if (ACPI_FAILURE(status)) { - return_VOID; - } - - /* We need a valid EC_ID string */ - - if (!(*table->id)) { + if (!ec_device_node) { return_VOID; } @@ -731,22 +722,11 @@ static void acpi_ev_orphan_ec_reg_method(void) (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - /* Get a handle to the EC device referenced in the ECDT */ - - status = acpi_get_handle(NULL, - ACPI_CAST_PTR(char, table->id), - ACPI_CAST_PTR(acpi_handle, &ec_device_node)); - if (ACPI_FAILURE(status)) { - goto exit; - } - /* Get a handle to a _REG method immediately under the EC device */ - status = acpi_get_handle(ec_device_node, - METHOD_NAME__REG, ACPI_CAST_PTR(acpi_handle, - ®_method)); + status = acpi_get_handle(ec_device_node, METHOD_NAME__REG, ®_method); if (ACPI_FAILURE(status)) { - goto exit; + goto exit; /* There is no _REG method present */ } /* @@ -754,19 +734,20 @@ static void acpi_ev_orphan_ec_reg_method(void) * this scope with the Embedded Controller space ID. Otherwise, it * will already have been executed. Note, this allows for Regions * with other space IDs to be present; but the code below will then - * execute the _REG method with the EC space ID argument. + * execute the _REG method with the embedded_control space_ID argument. */ next_node = acpi_ns_get_next_node(ec_device_node, NULL); while (next_node) { if ((next_node->type == ACPI_TYPE_REGION) && (next_node->object) && (next_node->object->region.space_id == ACPI_ADR_SPACE_EC)) { - goto exit; /* Do not execute _REG */ + goto exit; /* Do not execute the _REG */ } + next_node = acpi_ns_get_next_node(ec_device_node, next_node); } - /* Evaluate the _REG(EC,Connect) method */ + /* Evaluate the _REG(embedded_control,Connect) method */ args.count = 2; args.pointer = objects; -- cgit v0.10.2 From 67a9277496d8e674f27bb2a62c995eb79801d555 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 30 May 2013 10:01:19 +0800 Subject: ACPICA: Update version to 20130418 Version 20130418. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 454881e..1561264 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20130328 +#define ACPI_CA_VERSION 0x20130418 #include #include -- cgit v0.10.2 From 173a5a4c909789fcd57d00355d2237618a3824a4 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Fri, 31 May 2013 11:36:08 +0800 Subject: ACPI / processor: Fix potential NULL pointer dereference in acpi_processor_add() In acpi_processor_add(), get_cpu_device() may return NULL in some cases which is then passed to acpi_bind_one() and that will case a NULL pointer dereference to occur. Add a check to prevent that from happening. [rjw: Changelog] Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 157e738..e9b01e3 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -393,6 +393,11 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device, per_cpu(processors, pr->id) = pr; dev = get_cpu_device(pr->id); + if (!dev) { + result = -ENODEV; + goto err; + } + result = acpi_bind_one(dev, pr->handle); if (result) goto err; -- cgit v0.10.2 From aba6efc47133af4941cda16e690f71b7ad894da2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 1 Jun 2013 22:24:07 +0200 Subject: Memory hotplug: Move alternative function definitions to header Move the definitions of offline_pages() and remove_memory() for CONFIG_MEMORY_HOTREMOVE to memory_hotplug.h, where they belong, and make them static inline. Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 00569fb..dd38e62 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -234,6 +234,8 @@ static inline void unlock_memory_hotplug(void) {} extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages); extern void try_offline_node(int nid); +extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages); +extern void remove_memory(int nid, u64 start, u64 size); #else static inline int is_mem_section_removable(unsigned long pfn, @@ -243,6 +245,13 @@ static inline int is_mem_section_removable(unsigned long pfn, } static inline void try_offline_node(int nid) {} + +static inline int offline_pages(unsigned long start_pfn, unsigned long nr_pages) +{ + return -EINVAL; +} + +static inline void remove_memory(int nid, u64 start, u64 size) {} #endif /* CONFIG_MEMORY_HOTREMOVE */ extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 7026fbc..490e3d4 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1822,11 +1822,5 @@ void __ref remove_memory(int nid, u64 start, u64 size) unlock_memory_hotplug(); } -#else -int offline_pages(unsigned long start_pfn, unsigned long nr_pages) -{ - return -EINVAL; -} -void remove_memory(int nid, u64 start, u64 size) {} -#endif /* CONFIG_MEMORY_HOTREMOVE */ EXPORT_SYMBOL_GPL(remove_memory); +#endif /* CONFIG_MEMORY_HOTREMOVE */ -- cgit v0.10.2 From 537eb8e2b6e879d6aea58d913b2ebc3edc7af621 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Fri, 18 Jan 2013 18:54:29 +0530 Subject: PM / devfreq: Move exynos4 devfreq driver into a new sub-directory In anticipation of the new exynos5 devfreq and ppmu driver, create an exynos sub-directory. Move the existing exynos4 devfreq driver into the same. Signed-off-by: Abhilash Kesavan Acked-by: MyungJoo Ham Cc: Jonghwan Choi Cc: Kukjin Kim diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 8c46423..3bc1fef 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o # DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o +obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile new file mode 100644 index 0000000..1498823 --- /dev/null +++ b/drivers/devfreq/exynos/Makefile @@ -0,0 +1,2 @@ +# Exynos DEVFREQ Drivers +obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c new file mode 100644 index 0000000..3f37f3b --- /dev/null +++ b/drivers/devfreq/exynos/exynos4_bus.c @@ -0,0 +1,1153 @@ +/* drivers/devfreq/exynos4210_memorybus.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * MyungJoo Ham + * + * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework + * This version supports EXYNOS4210 only. This changes bus frequencies + * and vddint voltages. Exynos4412/4212 should be able to be supported + * with minor modifications. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */ +#ifdef CONFIG_EXYNOS_ASV +extern unsigned int exynos_result_of_asv; +#endif + +#include + +#include + +#define MAX_SAFEVOLT 1200000 /* 1.2V */ + +enum exynos4_busf_type { + TYPE_BUSF_EXYNOS4210, + TYPE_BUSF_EXYNOS4x12, +}; + +/* Assume that the bus is saturated if the utilization is 40% */ +#define BUS_SATURATION_RATIO 40 + +enum ppmu_counter { + PPMU_PMNCNT0 = 0, + PPMU_PMCCNT1, + PPMU_PMNCNT2, + PPMU_PMNCNT3, + PPMU_PMNCNT_MAX, +}; +struct exynos4_ppmu { + void __iomem *hw_base; + unsigned int ccnt; + unsigned int event; + unsigned int count[PPMU_PMNCNT_MAX]; + bool ccnt_overflow; + bool count_overflow[PPMU_PMNCNT_MAX]; +}; + +enum busclk_level_idx { + LV_0 = 0, + LV_1, + LV_2, + LV_3, + LV_4, + _LV_END +}; +#define EX4210_LV_MAX LV_2 +#define EX4x12_LV_MAX LV_4 +#define EX4210_LV_NUM (LV_2 + 1) +#define EX4x12_LV_NUM (LV_4 + 1) + +/** + * struct busfreq_opp_info - opp information for bus + * @rate: Frequency in hertz + * @volt: Voltage in microvolts corresponding to this OPP + */ +struct busfreq_opp_info { + unsigned long rate; + unsigned long volt; +}; + +struct busfreq_data { + enum exynos4_busf_type type; + struct device *dev; + struct devfreq *devfreq; + bool disabled; + struct regulator *vdd_int; + struct regulator *vdd_mif; /* Exynos4412/4212 only */ + struct busfreq_opp_info curr_oppinfo; + struct exynos4_ppmu dmc[2]; + + struct notifier_block pm_notifier; + struct mutex lock; + + /* Dividers calculated at boot/probe-time */ + unsigned int dmc_divtable[_LV_END]; /* DMC0 */ + unsigned int top_divtable[_LV_END]; +}; + +struct bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +/* 4210 controls clock of mif and voltage of int */ +static struct bus_opp_table exynos4210_busclk_table[] = { + {LV_0, 400000, 1150000}, + {LV_1, 267000, 1050000}, + {LV_2, 133000, 1025000}, + {0, 0, 0}, +}; + +/* + * MIF is the main control knob clock for exynox4x12 MIF/INT + * clock and voltage of both mif/int are controlled. + */ +static struct bus_opp_table exynos4x12_mifclk_table[] = { + {LV_0, 400000, 1100000}, + {LV_1, 267000, 1000000}, + {LV_2, 160000, 950000}, + {LV_3, 133000, 950000}, + {LV_4, 100000, 950000}, + {0, 0, 0}, +}; + +/* + * INT is not the control knob of 4x12. LV_x is not meant to represent + * the current performance. (MIF does) + */ +static struct bus_opp_table exynos4x12_intclk_table[] = { + {LV_0, 200000, 1000000}, + {LV_1, 160000, 950000}, + {LV_2, 133000, 925000}, + {LV_3, 100000, 900000}, + {0, 0, 0}, +}; + +/* TODO: asv volt definitions are "__initdata"? */ +/* Some chips have different operating voltages */ +static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { + {1150000, 1050000, 1050000}, + {1125000, 1025000, 1025000}, + {1100000, 1000000, 1000000}, + {1075000, 975000, 975000}, + {1050000, 950000, 950000}, +}; + +static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { + /* 400 267 160 133 100 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ + {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ + {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ + {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ + {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ + {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ +}; + +static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { + /* 200 160 133 100 */ + {1000000, 950000, 925000, 900000}, /* ASV0 */ + {975000, 925000, 925000, 900000}, /* ASV1 */ + {950000, 925000, 900000, 875000}, /* ASV2 */ + {950000, 900000, 900000, 875000}, /* ASV3 */ + {925000, 875000, 875000, 875000}, /* ASV4 */ + {900000, 850000, 850000, 850000}, /* ASV5 */ + {900000, 850000, 850000, 850000}, /* ASV6 */ + {900000, 850000, 850000, 850000}, /* ASV7 */ + {900000, 850000, 850000, 850000}, /* ASV8 */ +}; + +/*** Clock Divider Data for Exynos4210 ***/ +static unsigned int exynos4210_clkdiv_dmc0[][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + /* DMC L1: 266.7MHz */ + { 4, 1, 1, 2, 1, 1, 3, 1 }, + /* DMC L2: 133MHz */ + { 5, 1, 1, 5, 1, 1, 3, 1 }, +}; +static unsigned int exynos4210_clkdiv_top[][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + /* ACLK200 L1: 160MHz */ + { 4, 7, 5, 6, 1 }, + /* ACLK200 L2: 133MHz */ + { 5, 7, 7, 7, 1 }, +}; +static unsigned int exynos4210_clkdiv_lr_bus[][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, + /* ACLK_GDL/R L3: 133MHz */ + { 5, 1 }, +}; + +/*** Clock Divider Data for Exynos4212/4412 ***/ +static unsigned int exynos4x12_clkdiv_dmc0[][6] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP} + */ + + /* DMC L0: 400MHz */ + {3, 1, 1, 1, 1, 1}, + /* DMC L1: 266.7MHz */ + {4, 1, 1, 2, 1, 1}, + /* DMC L2: 160MHz */ + {5, 1, 1, 4, 1, 1}, + /* DMC L3: 133MHz */ + {5, 1, 1, 5, 1, 1}, + /* DMC L4: 100MHz */ + {7, 1, 1, 7, 1, 1}, +}; +static unsigned int exynos4x12_clkdiv_dmc1[][6] = { + /* + * Clock divider value for following + * { G2DACP, DIVC2C, DIVC2C_ACLK } + */ + + /* DMC L0: 400MHz */ + {3, 1, 1}, + /* DMC L1: 266.7MHz */ + {4, 2, 1}, + /* DMC L2: 160MHz */ + {5, 4, 1}, + /* DMC L3: 133MHz */ + {5, 5, 1}, + /* DMC L4: 100MHz */ + {7, 7, 1}, +}; +static unsigned int exynos4x12_clkdiv_top[][5] = { + /* + * Clock divider value for following + * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, + DIVACLK133, DIVONENAND } + */ + + /* ACLK_GDL/R L0: 200MHz */ + {2, 7, 4, 5, 1}, + /* ACLK_GDL/R L1: 200MHz */ + {2, 7, 4, 5, 1}, + /* ACLK_GDL/R L2: 160MHz */ + {4, 7, 5, 7, 1}, + /* ACLK_GDL/R L3: 133MHz */ + {4, 7, 5, 7, 1}, + /* ACLK_GDL/R L4: 100MHz */ + {7, 7, 7, 7, 1}, +}; +static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + {3, 1}, + /* ACLK_GDL/R L1: 200MHz */ + {3, 1}, + /* ACLK_GDL/R L2: 160MHz */ + {4, 1}, + /* ACLK_GDL/R L3: 133MHz */ + {5, 1}, + /* ACLK_GDL/R L4: 100MHz */ + {7, 1}, +}; +static unsigned int exynos4x12_clkdiv_sclkip[][3] = { + /* + * Clock divider value for following + * { DIVMFC, DIVJPEG, DIVFIMC0~3} + */ + + /* SCLK_MFC: 200MHz */ + {3, 3, 4}, + /* SCLK_MFC: 200MHz */ + {3, 3, 4}, + /* SCLK_MFC: 160MHz */ + {4, 4, 5}, + /* SCLK_MFC: 133MHz */ + {5, 5, 5}, + /* SCLK_MFC: 100MHz */ + {7, 7, 7}, +}; + + +static int exynos4210_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) +{ + unsigned int index; + unsigned int tmp; + + for (index = LV_0; index < EX4210_LV_NUM; index++) + if (oppi->rate == exynos4210_busclk_table[index].clk) + break; + + if (index == EX4210_LV_NUM) + return -EINVAL; + + /* Change Divider - DMC0 */ + tmp = data->dmc_divtable[index]; + + __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + tmp = data->top_divtable[index]; + + __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); + + tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << + EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4210_clkdiv_lr_bus[index][1] << + EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); + + tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << + EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4210_clkdiv_lr_bus[index][1] << + EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); + + return 0; +} + +static int exynos4x12_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) +{ + unsigned int index; + unsigned int tmp; + + for (index = LV_0; index < EX4x12_LV_NUM; index++) + if (oppi->rate == exynos4x12_mifclk_table[index].clk) + break; + + if (index == EX4x12_LV_NUM) + return -EINVAL; + + /* Change Divider - DMC0 */ + tmp = data->dmc_divtable[index]; + + __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - DMC1 */ + tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1); + + tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK | + EXYNOS4_CLKDIV_DMC1_C2C_MASK | + EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK); + + tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << + EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) | + (exynos4x12_clkdiv_dmc1[index][1] << + EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) | + (exynos4x12_clkdiv_dmc1[index][2] << + EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1); + } while (tmp & 0x111111); + + /* Change Divider - TOP */ + tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); + + tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK | + EXYNOS4_CLKDIV_TOP_ACLK100_MASK | + EXYNOS4_CLKDIV_TOP_ACLK160_MASK | + EXYNOS4_CLKDIV_TOP_ACLK133_MASK | + EXYNOS4_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((exynos4x12_clkdiv_top[index][0] << + EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) | + (exynos4x12_clkdiv_top[index][1] << + EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | + (exynos4x12_clkdiv_top[index][2] << + EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | + (exynos4x12_clkdiv_top[index][3] << + EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | + (exynos4x12_clkdiv_top[index][4] << + EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); + + tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << + EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4x12_clkdiv_lr_bus[index][1] << + EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); + + tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << + EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | + (exynos4x12_clkdiv_lr_bus[index][1] << + EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); + + /* Change Divider - MFC */ + tmp = __raw_readl(EXYNOS4_CLKDIV_MFC); + + tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << + EXYNOS4_CLKDIV_MFC_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_MFC); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC); + } while (tmp & 0x1); + + /* Change Divider - JPEG */ + tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1); + + tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << + EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); + } while (tmp & 0x1); + + /* Change Divider - FIMC0~3 */ + tmp = __raw_readl(EXYNOS4_CLKDIV_CAM); + + tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK | + EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK); + + tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << + EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) | + (exynos4x12_clkdiv_sclkip[index][2] << + EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)); + + __raw_writel(tmp, EXYNOS4_CLKDIV_CAM); + + do { + tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); + } while (tmp & 0x1111); + + return 0; +} + + +static void busfreq_mon_reset(struct busfreq_data *data) +{ + unsigned int i; + + for (i = 0; i < 2; i++) { + void __iomem *ppmu_base = data->dmc[i].hw_base; + + /* Reset PPMU */ + __raw_writel(0x8000000f, ppmu_base + 0xf010); + __raw_writel(0x8000000f, ppmu_base + 0xf050); + __raw_writel(0x6, ppmu_base + 0xf000); + __raw_writel(0x0, ppmu_base + 0xf100); + + /* Set PPMU Event */ + data->dmc[i].event = 0x6; + __raw_writel(((data->dmc[i].event << 12) | 0x1), + ppmu_base + 0xfc); + + /* Start PPMU */ + __raw_writel(0x1, ppmu_base + 0xf000); + } +} + +static void exynos4_read_ppmu(struct busfreq_data *data) +{ + int i, j; + + for (i = 0; i < 2; i++) { + void __iomem *ppmu_base = data->dmc[i].hw_base; + u32 overflow; + + /* Stop PPMU */ + __raw_writel(0x0, ppmu_base + 0xf000); + + /* Update local data from PPMU */ + overflow = __raw_readl(ppmu_base + 0xf050); + + data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100); + data->dmc[i].ccnt_overflow = overflow & (1 << 31); + + for (j = 0; j < PPMU_PMNCNT_MAX; j++) { + data->dmc[i].count[j] = __raw_readl( + ppmu_base + (0xf110 + (0x10 * j))); + data->dmc[i].count_overflow[j] = overflow & (1 << j); + } + } + + busfreq_mon_reset(data); +} + +static int exynos4x12_get_intspec(unsigned long mifclk) +{ + int i = 0; + + while (exynos4x12_intclk_table[i].clk) { + if (exynos4x12_intclk_table[i].clk <= mifclk) + return i; + i++; + } + + return -EINVAL; +} + +static int exynos4_bus_setvolt(struct busfreq_data *data, + struct busfreq_opp_info *oppi, + struct busfreq_opp_info *oldoppi) +{ + int err = 0, tmp; + unsigned long volt = oppi->volt; + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + /* OPP represents DMC clock + INT voltage */ + err = regulator_set_voltage(data->vdd_int, volt, + MAX_SAFEVOLT); + break; + case TYPE_BUSF_EXYNOS4x12: + /* OPP represents MIF clock + MIF voltage */ + err = regulator_set_voltage(data->vdd_mif, volt, + MAX_SAFEVOLT); + if (err) + break; + + tmp = exynos4x12_get_intspec(oppi->rate); + if (tmp < 0) { + err = tmp; + regulator_set_voltage(data->vdd_mif, + oldoppi->volt, + MAX_SAFEVOLT); + break; + } + err = regulator_set_voltage(data->vdd_int, + exynos4x12_intclk_table[tmp].volt, + MAX_SAFEVOLT); + /* Try to recover */ + if (err) + regulator_set_voltage(data->vdd_mif, + oldoppi->volt, + MAX_SAFEVOLT); + break; + default: + err = -EINVAL; + } + + return err; +} + +static int exynos4_bus_target(struct device *dev, unsigned long *_freq, + u32 flags) +{ + int err = 0; + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data *data = platform_get_drvdata(pdev); + struct opp *opp; + unsigned long freq; + unsigned long old_freq = data->curr_oppinfo.rate; + struct busfreq_opp_info new_oppinfo; + + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + freq = new_oppinfo.rate; + + if (old_freq == freq) + return 0; + + dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); + + mutex_lock(&data->lock); + + if (data->disabled) + goto out; + + if (old_freq < freq) + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); + if (err) + goto out; + + if (old_freq != freq) { + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_set_busclk(data, &new_oppinfo); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_set_busclk(data, &new_oppinfo); + break; + default: + err = -EINVAL; + } + } + if (err) + goto out; + + if (old_freq > freq) + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); + if (err) + goto out; + + data->curr_oppinfo = new_oppinfo; +out: + mutex_unlock(&data->lock); + return err; +} + +static int exynos4_get_busier_dmc(struct busfreq_data *data) +{ + u64 p0 = data->dmc[0].count[0]; + u64 p1 = data->dmc[1].count[0]; + + p0 *= data->dmc[1].ccnt; + p1 *= data->dmc[0].ccnt; + + if (data->dmc[1].ccnt == 0) + return 0; + + if (p0 > p1) + return 0; + return 1; +} + +static int exynos4_bus_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct busfreq_data *data = dev_get_drvdata(dev); + int busier_dmc; + int cycles_x2 = 2; /* 2 x cycles */ + void __iomem *addr; + u32 timing; + u32 memctrl; + + exynos4_read_ppmu(data); + busier_dmc = exynos4_get_busier_dmc(data); + stat->current_frequency = data->curr_oppinfo.rate; + + if (busier_dmc) + addr = S5P_VA_DMC1; + else + addr = S5P_VA_DMC0; + + memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */ + timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */ + + switch ((memctrl >> 8) & 0xf) { + case 0x4: /* DDR2 */ + cycles_x2 = ((timing >> 16) & 0xf) * 2; + break; + case 0x5: /* LPDDR2 */ + case 0x6: /* DDR3 */ + cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf); + break; + default: + pr_err("%s: Unknown Memory Type(%d).\n", __func__, + (memctrl >> 8) & 0xf); + return -EINVAL; + } + + /* Number of cycles spent on memory access */ + stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2); + stat->busy_time *= 100 / BUS_SATURATION_RATIO; + stat->total_time = data->dmc[busier_dmc].ccnt; + + /* If the counters have overflown, retry */ + if (data->dmc[busier_dmc].ccnt_overflow || + data->dmc[busier_dmc].count_overflow[0]) + return -EAGAIN; + + return 0; +} + +static void exynos4_bus_exit(struct device *dev) +{ + struct busfreq_data *data = dev_get_drvdata(dev); + + devfreq_unregister_opp_notifier(dev, data->devfreq); +} + +static struct devfreq_dev_profile exynos4_devfreq_profile = { + .initial_freq = 400000, + .polling_ms = 50, + .target = exynos4_bus_target, + .get_dev_status = exynos4_bus_get_dev_status, + .exit = exynos4_bus_exit, +}; + +static int exynos4210_init_tables(struct busfreq_data *data) +{ + u32 tmp; + int mgrp; + int i, err = 0; + + tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); + for (i = LV_0; i < EX4210_LV_NUM; i++) { + tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | + EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | + EXYNOS4_CLKDIV_DMC0_DPHY_MASK | + EXYNOS4_CLKDIV_DMC0_DMC_MASK | + EXYNOS4_CLKDIV_DMC0_DMCD_MASK | + EXYNOS4_CLKDIV_DMC0_DMCP_MASK | + EXYNOS4_CLKDIV_DMC0_COPY2_MASK | + EXYNOS4_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((exynos4210_clkdiv_dmc0[i][0] << + EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | + (exynos4210_clkdiv_dmc0[i][1] << + EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (exynos4210_clkdiv_dmc0[i][2] << + EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | + (exynos4210_clkdiv_dmc0[i][3] << + EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | + (exynos4210_clkdiv_dmc0[i][4] << + EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | + (exynos4210_clkdiv_dmc0[i][5] << + EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) | + (exynos4210_clkdiv_dmc0[i][6] << + EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) | + (exynos4210_clkdiv_dmc0[i][7] << + EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)); + + data->dmc_divtable[i] = tmp; + } + + tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); + for (i = LV_0; i < EX4210_LV_NUM; i++) { + tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK | + EXYNOS4_CLKDIV_TOP_ACLK100_MASK | + EXYNOS4_CLKDIV_TOP_ACLK160_MASK | + EXYNOS4_CLKDIV_TOP_ACLK133_MASK | + EXYNOS4_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((exynos4210_clkdiv_top[i][0] << + EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) | + (exynos4210_clkdiv_top[i][1] << + EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | + (exynos4210_clkdiv_top[i][2] << + EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | + (exynos4210_clkdiv_top[i][3] << + EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | + (exynos4210_clkdiv_top[i][4] << + EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); + + data->top_divtable[i] = tmp; + } + +#ifdef CONFIG_EXYNOS_ASV + tmp = exynos4_result_of_asv; +#else + tmp = 0; /* Max voltages for the reliability of the unknown */ +#endif + + pr_debug("ASV Group of Exynos4 is %d\n", tmp); + /* Use merged grouping for voltage */ + switch (tmp) { + case 0: + mgrp = 0; + break; + case 1: + case 2: + mgrp = 1; + break; + case 3: + case 4: + mgrp = 2; + break; + case 5: + case 6: + mgrp = 3; + break; + case 7: + mgrp = 4; + break; + default: + pr_warn("Unknown ASV Group. Use max voltage.\n"); + mgrp = 0; + } + + for (i = LV_0; i < EX4210_LV_NUM; i++) + exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; + + for (i = LV_0; i < EX4210_LV_NUM; i++) { + err = opp_add(data->dev, exynos4210_busclk_table[i].clk, + exynos4210_busclk_table[i].volt); + if (err) { + dev_err(data->dev, "Cannot add opp entries.\n"); + return err; + } + } + + + return 0; +} + +static int exynos4x12_init_tables(struct busfreq_data *data) +{ + unsigned int i; + unsigned int tmp; + int ret; + + /* Enable pause function for DREX2 DVFS */ + tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL); + tmp |= EXYNOS4_DMC_PAUSE_ENABLE; + __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL); + + tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); + + for (i = 0; i < EX4x12_LV_NUM; i++) { + tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | + EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | + EXYNOS4_CLKDIV_DMC0_DPHY_MASK | + EXYNOS4_CLKDIV_DMC0_DMC_MASK | + EXYNOS4_CLKDIV_DMC0_DMCD_MASK | + EXYNOS4_CLKDIV_DMC0_DMCP_MASK); + + tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << + EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][1] << + EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][2] << + EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][3] << + EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][4] << + EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | + (exynos4x12_clkdiv_dmc0[i][5] << + EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)); + + data->dmc_divtable[i] = tmp; + } + +#ifdef CONFIG_EXYNOS_ASV + tmp = exynos4_result_of_asv; +#else + tmp = 0; /* Max voltages for the reliability of the unknown */ +#endif + + if (tmp > 8) + tmp = 0; + pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); + + for (i = 0; i < EX4x12_LV_NUM; i++) { + exynos4x12_mifclk_table[i].volt = + exynos4x12_mif_step_50[tmp][i]; + exynos4x12_intclk_table[i].volt = + exynos4x12_int_volt[tmp][i]; + } + + for (i = 0; i < EX4x12_LV_NUM; i++) { + ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk, + exynos4x12_mifclk_table[i].volt); + if (ret) { + dev_err(data->dev, "Fail to add opp entries.\n"); + return ret; + } + } + + return 0; +} + +static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct busfreq_data *data = container_of(this, struct busfreq_data, + pm_notifier); + struct opp *opp; + struct busfreq_opp_info new_oppinfo; + unsigned long maxfreq = ULONG_MAX; + int err = 0; + + switch (event) { + case PM_SUSPEND_PREPARE: + /* Set Fastest and Deactivate DVFS */ + mutex_lock(&data->lock); + + data->disabled = true; + + rcu_read_lock(); + opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(data->dev, "%s: unable to find a min freq\n", + __func__); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); + if (err) + goto unlock; + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_set_busclk(data, &new_oppinfo); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_set_busclk(data, &new_oppinfo); + break; + default: + err = -EINVAL; + } + if (err) + goto unlock; + + data->curr_oppinfo = new_oppinfo; +unlock: + mutex_unlock(&data->lock); + if (err) + return err; + return NOTIFY_OK; + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + /* Reactivate */ + mutex_lock(&data->lock); + data->disabled = false; + mutex_unlock(&data->lock); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int exynos4_busfreq_probe(struct platform_device *pdev) +{ + struct busfreq_data *data; + struct opp *opp; + struct device *dev = &pdev->dev; + int err = 0; + + data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + + data->type = pdev->id_entry->driver_data; + data->dmc[0].hw_base = S5P_VA_DMC0; + data->dmc[1].hw_base = S5P_VA_DMC1; + data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; + data->dev = dev; + mutex_init(&data->lock); + + switch (data->type) { + case TYPE_BUSF_EXYNOS4210: + err = exynos4210_init_tables(data); + break; + case TYPE_BUSF_EXYNOS4x12: + err = exynos4x12_init_tables(data); + break; + default: + dev_err(dev, "Cannot determine the device id %d\n", data->type); + err = -EINVAL; + } + if (err) + return err; + + data->vdd_int = devm_regulator_get(dev, "vdd_int"); + if (IS_ERR(data->vdd_int)) { + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); + return PTR_ERR(data->vdd_int); + } + if (data->type == TYPE_BUSF_EXYNOS4x12) { + data->vdd_mif = devm_regulator_get(dev, "vdd_mif"); + if (IS_ERR(data->vdd_mif)) { + dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); + return PTR_ERR(data->vdd_mif); + } + } + + rcu_read_lock(); + opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dev, "Invalid initial frequency %lu kHz.\n", + exynos4_devfreq_profile.initial_freq); + return PTR_ERR(opp); + } + data->curr_oppinfo.rate = opp_get_freq(opp); + data->curr_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + + platform_set_drvdata(pdev, data); + + busfreq_mon_reset(data); + + data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile, + "simple_ondemand", NULL); + if (IS_ERR(data->devfreq)) + return PTR_ERR(data->devfreq); + + devfreq_register_opp_notifier(dev, data->devfreq); + + err = register_pm_notifier(&data->pm_notifier); + if (err) { + dev_err(dev, "Failed to setup pm notifier\n"); + devfreq_remove_device(data->devfreq); + return err; + } + + return 0; +} + +static int exynos4_busfreq_remove(struct platform_device *pdev) +{ + struct busfreq_data *data = platform_get_drvdata(pdev); + + unregister_pm_notifier(&data->pm_notifier); + devfreq_remove_device(data->devfreq); + + return 0; +} + +static int exynos4_busfreq_resume(struct device *dev) +{ + struct busfreq_data *data = dev_get_drvdata(dev); + + busfreq_mon_reset(data); + return 0; +} + +static const struct dev_pm_ops exynos4_busfreq_pm = { + .resume = exynos4_busfreq_resume, +}; + +static const struct platform_device_id exynos4_busfreq_id[] = { + { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, + { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, + { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, + { }, +}; + +static struct platform_driver exynos4_busfreq_driver = { + .probe = exynos4_busfreq_probe, + .remove = exynos4_busfreq_remove, + .id_table = exynos4_busfreq_id, + .driver = { + .name = "exynos4-busfreq", + .owner = THIS_MODULE, + .pm = &exynos4_busfreq_pm, + }, +}; + +static int __init exynos4_busfreq_init(void) +{ + return platform_driver_register(&exynos4_busfreq_driver); +} +late_initcall(exynos4_busfreq_init); + +static void __exit exynos4_busfreq_exit(void) +{ + platform_driver_unregister(&exynos4_busfreq_driver); +} +module_exit(exynos4_busfreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); +MODULE_AUTHOR("MyungJoo Ham "); diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c deleted file mode 100644 index 3f37f3b..0000000 --- a/drivers/devfreq/exynos4_bus.c +++ /dev/null @@ -1,1153 +0,0 @@ -/* drivers/devfreq/exynos4210_memorybus.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * MyungJoo Ham - * - * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework - * This version supports EXYNOS4210 only. This changes bus frequencies - * and vddint voltages. Exynos4412/4212 should be able to be supported - * with minor modifications. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */ -#ifdef CONFIG_EXYNOS_ASV -extern unsigned int exynos_result_of_asv; -#endif - -#include - -#include - -#define MAX_SAFEVOLT 1200000 /* 1.2V */ - -enum exynos4_busf_type { - TYPE_BUSF_EXYNOS4210, - TYPE_BUSF_EXYNOS4x12, -}; - -/* Assume that the bus is saturated if the utilization is 40% */ -#define BUS_SATURATION_RATIO 40 - -enum ppmu_counter { - PPMU_PMNCNT0 = 0, - PPMU_PMCCNT1, - PPMU_PMNCNT2, - PPMU_PMNCNT3, - PPMU_PMNCNT_MAX, -}; -struct exynos4_ppmu { - void __iomem *hw_base; - unsigned int ccnt; - unsigned int event; - unsigned int count[PPMU_PMNCNT_MAX]; - bool ccnt_overflow; - bool count_overflow[PPMU_PMNCNT_MAX]; -}; - -enum busclk_level_idx { - LV_0 = 0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; -#define EX4210_LV_MAX LV_2 -#define EX4x12_LV_MAX LV_4 -#define EX4210_LV_NUM (LV_2 + 1) -#define EX4x12_LV_NUM (LV_4 + 1) - -/** - * struct busfreq_opp_info - opp information for bus - * @rate: Frequency in hertz - * @volt: Voltage in microvolts corresponding to this OPP - */ -struct busfreq_opp_info { - unsigned long rate; - unsigned long volt; -}; - -struct busfreq_data { - enum exynos4_busf_type type; - struct device *dev; - struct devfreq *devfreq; - bool disabled; - struct regulator *vdd_int; - struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct busfreq_opp_info curr_oppinfo; - struct exynos4_ppmu dmc[2]; - - struct notifier_block pm_notifier; - struct mutex lock; - - /* Dividers calculated at boot/probe-time */ - unsigned int dmc_divtable[_LV_END]; /* DMC0 */ - unsigned int top_divtable[_LV_END]; -}; - -struct bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -/* 4210 controls clock of mif and voltage of int */ -static struct bus_opp_table exynos4210_busclk_table[] = { - {LV_0, 400000, 1150000}, - {LV_1, 267000, 1050000}, - {LV_2, 133000, 1025000}, - {0, 0, 0}, -}; - -/* - * MIF is the main control knob clock for exynox4x12 MIF/INT - * clock and voltage of both mif/int are controlled. - */ -static struct bus_opp_table exynos4x12_mifclk_table[] = { - {LV_0, 400000, 1100000}, - {LV_1, 267000, 1000000}, - {LV_2, 160000, 950000}, - {LV_3, 133000, 950000}, - {LV_4, 100000, 950000}, - {0, 0, 0}, -}; - -/* - * INT is not the control knob of 4x12. LV_x is not meant to represent - * the current performance. (MIF does) - */ -static struct bus_opp_table exynos4x12_intclk_table[] = { - {LV_0, 200000, 1000000}, - {LV_1, 160000, 950000}, - {LV_2, 133000, 925000}, - {LV_3, 100000, 900000}, - {0, 0, 0}, -}; - -/* TODO: asv volt definitions are "__initdata"? */ -/* Some chips have different operating voltages */ -static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = { - {1150000, 1050000, 1050000}, - {1125000, 1025000, 1025000}, - {1100000, 1000000, 1000000}, - {1075000, 975000, 975000}, - {1050000, 950000, 950000}, -}; - -static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = { - /* 400 267 160 133 100 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */ - {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */ - {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */ - {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */ - {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */ - {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = { - /* 200 160 133 100 */ - {1000000, 950000, 925000, 900000}, /* ASV0 */ - {975000, 925000, 925000, 900000}, /* ASV1 */ - {950000, 925000, 900000, 875000}, /* ASV2 */ - {950000, 900000, 900000, 875000}, /* ASV3 */ - {925000, 875000, 875000, 875000}, /* ASV4 */ - {900000, 850000, 850000, 850000}, /* ASV5 */ - {900000, 850000, 850000, 850000}, /* ASV6 */ - {900000, 850000, 850000, 850000}, /* ASV7 */ - {900000, 850000, 850000, 850000}, /* ASV8 */ -}; - -/*** Clock Divider Data for Exynos4210 ***/ -static unsigned int exynos4210_clkdiv_dmc0[][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - /* DMC L1: 266.7MHz */ - { 4, 1, 1, 2, 1, 1, 3, 1 }, - /* DMC L2: 133MHz */ - { 5, 1, 1, 5, 1, 1, 3, 1 }, -}; -static unsigned int exynos4210_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - /* ACLK200 L1: 160MHz */ - { 4, 7, 5, 6, 1 }, - /* ACLK200 L2: 133MHz */ - { 5, 7, 7, 7, 1 }, -}; -static unsigned int exynos4210_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - /* ACLK_GDL/R L3: 133MHz */ - { 5, 1 }, -}; - -/*** Clock Divider Data for Exynos4212/4412 ***/ -static unsigned int exynos4x12_clkdiv_dmc0[][6] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP} - */ - - /* DMC L0: 400MHz */ - {3, 1, 1, 1, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 1, 1, 2, 1, 1}, - /* DMC L2: 160MHz */ - {5, 1, 1, 4, 1, 1}, - /* DMC L3: 133MHz */ - {5, 1, 1, 5, 1, 1}, - /* DMC L4: 100MHz */ - {7, 1, 1, 7, 1, 1}, -}; -static unsigned int exynos4x12_clkdiv_dmc1[][6] = { - /* - * Clock divider value for following - * { G2DACP, DIVC2C, DIVC2C_ACLK } - */ - - /* DMC L0: 400MHz */ - {3, 1, 1}, - /* DMC L1: 266.7MHz */ - {4, 2, 1}, - /* DMC L2: 160MHz */ - {5, 4, 1}, - /* DMC L3: 133MHz */ - {5, 5, 1}, - /* DMC L4: 100MHz */ - {7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_top[][5] = { - /* - * Clock divider value for following - * { DIVACLK266_GPS, DIVACLK100, DIVACLK160, - DIVACLK133, DIVONENAND } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {2, 7, 4, 5, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {4, 7, 5, 7, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 7, 7, 7, 1}, -}; -static unsigned int exynos4x12_clkdiv_lr_bus[][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L1: 200MHz */ - {3, 1}, - /* ACLK_GDL/R L2: 160MHz */ - {4, 1}, - /* ACLK_GDL/R L3: 133MHz */ - {5, 1}, - /* ACLK_GDL/R L4: 100MHz */ - {7, 1}, -}; -static unsigned int exynos4x12_clkdiv_sclkip[][3] = { - /* - * Clock divider value for following - * { DIVMFC, DIVJPEG, DIVFIMC0~3} - */ - - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 200MHz */ - {3, 3, 4}, - /* SCLK_MFC: 160MHz */ - {4, 4, 5}, - /* SCLK_MFC: 133MHz */ - {5, 5, 5}, - /* SCLK_MFC: 100MHz */ - {7, 7, 7}, -}; - - -static int exynos4210_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4210_LV_NUM; index++) - if (oppi->rate == exynos4210_busclk_table[index].clk) - break; - - if (index == EX4210_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - tmp = data->top_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4210_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4210_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - return 0; -} - -static int exynos4x12_set_busclk(struct busfreq_data *data, - struct busfreq_opp_info *oppi) -{ - unsigned int index; - unsigned int tmp; - - for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (oppi->rate == exynos4x12_mifclk_table[index].clk) - break; - - if (index == EX4x12_LV_NUM) - return -EINVAL; - - /* Change Divider - DMC0 */ - tmp = data->dmc_divtable[index]; - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - DMC1 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1); - - tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK | - EXYNOS4_CLKDIV_DMC1_C2C_MASK | - EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc1[index][0] << - EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][1] << - EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) | - (exynos4x12_clkdiv_dmc1[index][2] << - EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1); - } while (tmp & 0x111111); - - /* Change Divider - TOP */ - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4x12_clkdiv_top[index][0] << - EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) | - (exynos4x12_clkdiv_top[index][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4x12_clkdiv_top[index][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4x12_clkdiv_top[index][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4x12_clkdiv_top[index][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_TOP); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS); - - tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] << - EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) | - (exynos4x12_clkdiv_lr_bus[index][1] << - EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); - - /* Change Divider - MFC */ - tmp = __raw_readl(EXYNOS4_CLKDIV_MFC); - - tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][0] << - EXYNOS4_CLKDIV_MFC_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_MFC); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC); - } while (tmp & 0x1); - - /* Change Divider - JPEG */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1); - - tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][1] << - EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1); - - /* Change Divider - FIMC0~3 */ - tmp = __raw_readl(EXYNOS4_CLKDIV_CAM); - - tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK | - EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK); - - tmp |= ((exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) | - (exynos4x12_clkdiv_sclkip[index][2] << - EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)); - - __raw_writel(tmp, EXYNOS4_CLKDIV_CAM); - - do { - tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1); - } while (tmp & 0x1111); - - return 0; -} - - -static void busfreq_mon_reset(struct busfreq_data *data) -{ - unsigned int i; - - for (i = 0; i < 2; i++) { - void __iomem *ppmu_base = data->dmc[i].hw_base; - - /* Reset PPMU */ - __raw_writel(0x8000000f, ppmu_base + 0xf010); - __raw_writel(0x8000000f, ppmu_base + 0xf050); - __raw_writel(0x6, ppmu_base + 0xf000); - __raw_writel(0x0, ppmu_base + 0xf100); - - /* Set PPMU Event */ - data->dmc[i].event = 0x6; - __raw_writel(((data->dmc[i].event << 12) | 0x1), - ppmu_base + 0xfc); - - /* Start PPMU */ - __raw_writel(0x1, ppmu_base + 0xf000); - } -} - -static void exynos4_read_ppmu(struct busfreq_data *data) -{ - int i, j; - - for (i = 0; i < 2; i++) { - void __iomem *ppmu_base = data->dmc[i].hw_base; - u32 overflow; - - /* Stop PPMU */ - __raw_writel(0x0, ppmu_base + 0xf000); - - /* Update local data from PPMU */ - overflow = __raw_readl(ppmu_base + 0xf050); - - data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100); - data->dmc[i].ccnt_overflow = overflow & (1 << 31); - - for (j = 0; j < PPMU_PMNCNT_MAX; j++) { - data->dmc[i].count[j] = __raw_readl( - ppmu_base + (0xf110 + (0x10 * j))); - data->dmc[i].count_overflow[j] = overflow & (1 << j); - } - } - - busfreq_mon_reset(data); -} - -static int exynos4x12_get_intspec(unsigned long mifclk) -{ - int i = 0; - - while (exynos4x12_intclk_table[i].clk) { - if (exynos4x12_intclk_table[i].clk <= mifclk) - return i; - i++; - } - - return -EINVAL; -} - -static int exynos4_bus_setvolt(struct busfreq_data *data, - struct busfreq_opp_info *oppi, - struct busfreq_opp_info *oldoppi) -{ - int err = 0, tmp; - unsigned long volt = oppi->volt; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - /* OPP represents DMC clock + INT voltage */ - err = regulator_set_voltage(data->vdd_int, volt, - MAX_SAFEVOLT); - break; - case TYPE_BUSF_EXYNOS4x12: - /* OPP represents MIF clock + MIF voltage */ - err = regulator_set_voltage(data->vdd_mif, volt, - MAX_SAFEVOLT); - if (err) - break; - - tmp = exynos4x12_get_intspec(oppi->rate); - if (tmp < 0) { - err = tmp; - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - } - err = regulator_set_voltage(data->vdd_int, - exynos4x12_intclk_table[tmp].volt, - MAX_SAFEVOLT); - /* Try to recover */ - if (err) - regulator_set_voltage(data->vdd_mif, - oldoppi->volt, - MAX_SAFEVOLT); - break; - default: - err = -EINVAL; - } - - return err; -} - -static int exynos4_bus_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp; - unsigned long freq; - unsigned long old_freq = data->curr_oppinfo.rate; - struct busfreq_opp_info new_oppinfo; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - return PTR_ERR(opp); - } - new_oppinfo.rate = opp_get_freq(opp); - new_oppinfo.volt = opp_get_voltage(opp); - rcu_read_unlock(); - freq = new_oppinfo.rate; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (old_freq < freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - if (old_freq != freq) { - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - } - if (err) - goto out; - - if (old_freq > freq) - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto out; - - data->curr_oppinfo = new_oppinfo; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos4_get_busier_dmc(struct busfreq_data *data) -{ - u64 p0 = data->dmc[0].count[0]; - u64 p1 = data->dmc[1].count[0]; - - p0 *= data->dmc[1].ccnt; - p1 *= data->dmc[0].ccnt; - - if (data->dmc[1].ccnt == 0) - return 0; - - if (p0 > p1) - return 0; - return 1; -} - -static int exynos4_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - int busier_dmc; - int cycles_x2 = 2; /* 2 x cycles */ - void __iomem *addr; - u32 timing; - u32 memctrl; - - exynos4_read_ppmu(data); - busier_dmc = exynos4_get_busier_dmc(data); - stat->current_frequency = data->curr_oppinfo.rate; - - if (busier_dmc) - addr = S5P_VA_DMC1; - else - addr = S5P_VA_DMC0; - - memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */ - timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */ - - switch ((memctrl >> 8) & 0xf) { - case 0x4: /* DDR2 */ - cycles_x2 = ((timing >> 16) & 0xf) * 2; - break; - case 0x5: /* LPDDR2 */ - case 0x6: /* DDR3 */ - cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf); - break; - default: - pr_err("%s: Unknown Memory Type(%d).\n", __func__, - (memctrl >> 8) & 0xf); - return -EINVAL; - } - - /* Number of cycles spent on memory access */ - stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2); - stat->busy_time *= 100 / BUS_SATURATION_RATIO; - stat->total_time = data->dmc[busier_dmc].ccnt; - - /* If the counters have overflown, retry */ - if (data->dmc[busier_dmc].ccnt_overflow || - data->dmc[busier_dmc].count_overflow[0]) - return -EAGAIN; - - return 0; -} - -static void exynos4_bus_exit(struct device *dev) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - - devfreq_unregister_opp_notifier(dev, data->devfreq); -} - -static struct devfreq_dev_profile exynos4_devfreq_profile = { - .initial_freq = 400000, - .polling_ms = 50, - .target = exynos4_bus_target, - .get_dev_status = exynos4_bus_get_dev_status, - .exit = exynos4_bus_exit, -}; - -static int exynos4210_init_tables(struct busfreq_data *data) -{ - u32 tmp; - int mgrp; - int i, err = 0; - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK | - EXYNOS4_CLKDIV_DMC0_COPY2_MASK | - EXYNOS4_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((exynos4210_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4210_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4210_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4210_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4210_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) | - (exynos4210_clkdiv_dmc0[i][6] << - EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) | - (exynos4210_clkdiv_dmc0[i][7] << - EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - - tmp = __raw_readl(EXYNOS4_CLKDIV_TOP); - for (i = LV_0; i < EX4210_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK | - EXYNOS4_CLKDIV_TOP_ACLK100_MASK | - EXYNOS4_CLKDIV_TOP_ACLK160_MASK | - EXYNOS4_CLKDIV_TOP_ACLK133_MASK | - EXYNOS4_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((exynos4210_clkdiv_top[i][0] << - EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) | - (exynos4210_clkdiv_top[i][1] << - EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) | - (exynos4210_clkdiv_top[i][2] << - EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) | - (exynos4210_clkdiv_top[i][3] << - EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) | - (exynos4210_clkdiv_top[i][4] << - EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)); - - data->top_divtable[i] = tmp; - } - -#ifdef CONFIG_EXYNOS_ASV - tmp = exynos4_result_of_asv; -#else - tmp = 0; /* Max voltages for the reliability of the unknown */ -#endif - - pr_debug("ASV Group of Exynos4 is %d\n", tmp); - /* Use merged grouping for voltage */ - switch (tmp) { - case 0: - mgrp = 0; - break; - case 1: - case 2: - mgrp = 1; - break; - case 3: - case 4: - mgrp = 2; - break; - case 5: - case 6: - mgrp = 3; - break; - case 7: - mgrp = 4; - break; - default: - pr_warn("Unknown ASV Group. Use max voltage.\n"); - mgrp = 0; - } - - for (i = LV_0; i < EX4210_LV_NUM; i++) - exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; - - for (i = LV_0; i < EX4210_LV_NUM; i++) { - err = opp_add(data->dev, exynos4210_busclk_table[i].clk, - exynos4210_busclk_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - - return 0; -} - -static int exynos4x12_init_tables(struct busfreq_data *data) -{ - unsigned int i; - unsigned int tmp; - int ret; - - /* Enable pause function for DREX2 DVFS */ - tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL); - tmp |= EXYNOS4_DMC_PAUSE_ENABLE; - __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL); - - tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK | - EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK | - EXYNOS4_CLKDIV_DMC0_DPHY_MASK | - EXYNOS4_CLKDIV_DMC0_DMC_MASK | - EXYNOS4_CLKDIV_DMC0_DMCD_MASK | - EXYNOS4_CLKDIV_DMC0_DMCP_MASK); - - tmp |= ((exynos4x12_clkdiv_dmc0[i][0] << - EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][1] << - EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][2] << - EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][3] << - EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][4] << - EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) | - (exynos4x12_clkdiv_dmc0[i][5] << - EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)); - - data->dmc_divtable[i] = tmp; - } - -#ifdef CONFIG_EXYNOS_ASV - tmp = exynos4_result_of_asv; -#else - tmp = 0; /* Max voltages for the reliability of the unknown */ -#endif - - if (tmp > 8) - tmp = 0; - pr_debug("ASV Group of Exynos4x12 is %d\n", tmp); - - for (i = 0; i < EX4x12_LV_NUM; i++) { - exynos4x12_mifclk_table[i].volt = - exynos4x12_mif_step_50[tmp][i]; - exynos4x12_intclk_table[i].volt = - exynos4x12_int_volt[tmp][i]; - } - - for (i = 0; i < EX4x12_LV_NUM; i++) { - ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk, - exynos4x12_mifclk_table[i].volt); - if (ret) { - dev_err(data->dev, "Fail to add opp entries.\n"); - return ret; - } - } - - return 0; -} - -static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data *data = container_of(this, struct busfreq_data, - pm_notifier); - struct opp *opp; - struct busfreq_opp_info new_oppinfo; - unsigned long maxfreq = ULONG_MAX; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(data->dev, "%s: unable to find a min freq\n", - __func__); - return PTR_ERR(opp); - } - new_oppinfo.rate = opp_get_freq(opp); - new_oppinfo.volt = opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos4_bus_setvolt(data, &new_oppinfo, - &data->curr_oppinfo); - if (err) - goto unlock; - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, &new_oppinfo); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, &new_oppinfo); - break; - default: - err = -EINVAL; - } - if (err) - goto unlock; - - data->curr_oppinfo = new_oppinfo; -unlock: - mutex_unlock(&data->lock); - if (err) - return err; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos4_busfreq_probe(struct platform_device *pdev) -{ - struct busfreq_data *data; - struct opp *opp; - struct device *dev = &pdev->dev; - int err = 0; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - data->type = pdev->id_entry->driver_data; - data->dmc[0].hw_base = S5P_VA_DMC0; - data->dmc[1].hw_base = S5P_VA_DMC1; - data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - switch (data->type) { - case TYPE_BUSF_EXYNOS4210: - err = exynos4210_init_tables(data); - break; - case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_init_tables(data); - break; - default: - dev_err(dev, "Cannot determine the device id %d\n", data->type); - err = -EINVAL; - } - if (err) - return err; - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - if (data->type == TYPE_BUSF_EXYNOS4x12) { - data->vdd_mif = devm_regulator_get(dev, "vdd_mif"); - if (IS_ERR(data->vdd_mif)) { - dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n"); - return PTR_ERR(data->vdd_mif); - } - } - - rcu_read_lock(); - opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos4_devfreq_profile.initial_freq); - return PTR_ERR(opp); - } - data->curr_oppinfo.rate = opp_get_freq(opp); - data->curr_oppinfo.volt = opp_get_voltage(opp); - rcu_read_unlock(); - - platform_set_drvdata(pdev, data); - - busfreq_mon_reset(data); - - data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - devfreq_register_opp_notifier(dev, data->devfreq); - - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - devfreq_remove_device(data->devfreq); - return err; - } - - return 0; -} - -static int exynos4_busfreq_remove(struct platform_device *pdev) -{ - struct busfreq_data *data = platform_get_drvdata(pdev); - - unregister_pm_notifier(&data->pm_notifier); - devfreq_remove_device(data->devfreq); - - return 0; -} - -static int exynos4_busfreq_resume(struct device *dev) -{ - struct busfreq_data *data = dev_get_drvdata(dev); - - busfreq_mon_reset(data); - return 0; -} - -static const struct dev_pm_ops exynos4_busfreq_pm = { - .resume = exynos4_busfreq_resume, -}; - -static const struct platform_device_id exynos4_busfreq_id[] = { - { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 }, - { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 }, - { }, -}; - -static struct platform_driver exynos4_busfreq_driver = { - .probe = exynos4_busfreq_probe, - .remove = exynos4_busfreq_remove, - .id_table = exynos4_busfreq_id, - .driver = { - .name = "exynos4-busfreq", - .owner = THIS_MODULE, - .pm = &exynos4_busfreq_pm, - }, -}; - -static int __init exynos4_busfreq_init(void) -{ - return platform_driver_register(&exynos4_busfreq_driver); -} -late_initcall(exynos4_busfreq_init); - -static void __exit exynos4_busfreq_exit(void) -{ - platform_driver_unregister(&exynos4_busfreq_driver); -} -module_exit(exynos4_busfreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework"); -MODULE_AUTHOR("MyungJoo Ham "); -- cgit v0.10.2 From 6ccce69955c1bf2973bdec0d023685401de543f4 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Mon, 4 Feb 2013 17:44:48 +0530 Subject: PM / devfreq: Add Exynos5-bus devfreq driver for Exynos5250 Exynos5-bus device devfreq driver monitors PPMU counters and adjusts operating frequencies and voltages with OPP. ASV should be used to provide appropriate voltages as per the speed group of the SoC rather than using a constant 1.025V. Signed-off-by: Abhilash Kesavan [myungjoo.ham@samsung.com: minor style update] Signed-off-by: MyungJoo Ham Cc: Jonghwan Choi Cc: Kukjin Kim diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 0f079be..1560d0d 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ To operate with optimal voltages, ASV support is required (CONFIG_EXYNOS_ASV). +config ARM_EXYNOS5_BUS_DEVFREQ + bool "ARM Exynos5250 Bus DEVFREQ Driver" + depends on SOC_EXYNOS5250 + select ARCH_HAS_OPP + select DEVFREQ_GOV_SIMPLE_ONDEMAND + help + This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). + It reads PPMU counters of memory controllers and adjusts the + operating frequencies and voltages with OPP support. + endif # PM_DEVFREQ diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 3bc1fef..16138c9 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o # DEVFREQ Drivers obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/ diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile index 1498823..bfaaf5b 100644 --- a/drivers/devfreq/exynos/Makefile +++ b/drivers/devfreq/exynos/Makefile @@ -1,2 +1,3 @@ # Exynos DEVFREQ Drivers obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c new file mode 100644 index 0000000..574b16b --- /dev/null +++ b/drivers/devfreq/exynos/exynos5_bus.c @@ -0,0 +1,503 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework + * Based on work done by Jonghwan Choi + * Support for only EXYNOS5250 is present. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "exynos_ppmu.h" + +#define MAX_SAFEVOLT 1100000 /* 1.10V */ +/* Assume that the bus is saturated if the utilization is 25% */ +#define INT_BUS_SATURATION_RATIO 25 + +enum int_level_idx { + LV_0, + LV_1, + LV_2, + LV_3, + LV_4, + _LV_END +}; + +enum exynos_ppmu_list { + PPMU_RIGHT, + PPMU_END, +}; + +struct busfreq_data_int { + struct device *dev; + struct devfreq *devfreq; + struct regulator *vdd_int; + struct exynos_ppmu ppmu[PPMU_END]; + unsigned long curr_freq; + bool disabled; + + struct notifier_block pm_notifier; + struct mutex lock; + struct pm_qos_request int_req; + struct clk *int_clk; +}; + +struct int_bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +static struct int_bus_opp_table exynos5_int_opp_table[] = { + {LV_0, 266000, 1025000}, + {LV_1, 200000, 1025000}, + {LV_2, 160000, 1025000}, + {LV_3, 133000, 1025000}, + {LV_4, 100000, 1025000}, + {0, 0, 0}, +}; + +static void busfreq_mon_reset(struct busfreq_data_int *data) +{ + unsigned int i; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + void __iomem *ppmu_base = data->ppmu[i].hw_base; + + /* Reset the performance and cycle counters */ + exynos_ppmu_reset(ppmu_base); + + /* Setup count registers to monitor read/write transactions */ + data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT; + exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3, + data->ppmu[i].event[PPMU_PMNCNT3]); + + exynos_ppmu_start(ppmu_base); + } +} + +static void exynos5_read_ppmu(struct busfreq_data_int *data) +{ + int i, j; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + void __iomem *ppmu_base = data->ppmu[i].hw_base; + + exynos_ppmu_stop(ppmu_base); + + /* Update local data from PPMU */ + data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT); + + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { + if (data->ppmu[i].event[j] == 0) + data->ppmu[i].count[j] = 0; + else + data->ppmu[i].count[j] = + exynos_ppmu_read(ppmu_base, j); + } + } + + busfreq_mon_reset(data); +} + +static int exynos5_int_setvolt(struct busfreq_data_int *data, + unsigned long volt) +{ + return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT); +} + +static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, + u32 flags) +{ + int err = 0; + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + struct opp *opp; + unsigned long old_freq, freq; + unsigned long volt; + + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dev, "%s: Invalid OPP.\n", __func__); + return PTR_ERR(opp); + } + + freq = opp_get_freq(opp); + volt = opp_get_voltage(opp); + rcu_read_unlock(); + + old_freq = data->curr_freq; + + if (old_freq == freq) + return 0; + + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt); + + mutex_lock(&data->lock); + + if (data->disabled) + goto out; + + if (freq > exynos5_int_opp_table[0].clk) + pm_qos_update_request(&data->int_req, freq * 16 / 1000); + else + pm_qos_update_request(&data->int_req, -1); + + if (old_freq < freq) + err = exynos5_int_setvolt(data, volt); + if (err) + goto out; + + err = clk_set_rate(data->int_clk, freq * 1000); + + if (err) + goto out; + + if (old_freq > freq) + err = exynos5_int_setvolt(data, volt); + if (err) + goto out; + + data->curr_freq = freq; +out: + mutex_unlock(&data->lock); + return err; +} + +static int exynos5_get_busier_dmc(struct busfreq_data_int *data) +{ + int i, j; + int busy = 0; + unsigned int temp = 0; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { + if (data->ppmu[i].count[j] > temp) { + temp = data->ppmu[i].count[j]; + busy = i; + } + } + } + + return busy; +} + +static int exynos5_int_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + int busier_dmc; + + exynos5_read_ppmu(data); + busier_dmc = exynos5_get_busier_dmc(data); + + stat->current_frequency = data->curr_freq; + + /* Number of cycles spent on memory access */ + stat->busy_time = data->ppmu[busier_dmc].count[PPMU_PMNCNT3]; + stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO; + stat->total_time = data->ppmu[busier_dmc].ccnt; + + return 0; +} +static void exynos5_int_exit(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + devfreq_unregister_opp_notifier(dev, data->devfreq); +} + +static struct devfreq_dev_profile exynos5_devfreq_int_profile = { + .initial_freq = 160000, + .polling_ms = 100, + .target = exynos5_busfreq_int_target, + .get_dev_status = exynos5_int_get_dev_status, + .exit = exynos5_int_exit, +}; + +static int exynos5250_init_int_tables(struct busfreq_data_int *data) +{ + int i, err = 0; + + for (i = LV_0; i < _LV_END; i++) { + err = opp_add(data->dev, exynos5_int_opp_table[i].clk, + exynos5_int_opp_table[i].volt); + if (err) { + dev_err(data->dev, "Cannot add opp entries.\n"); + return err; + } + } + + return 0; +} + +static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct busfreq_data_int *data = container_of(this, + struct busfreq_data_int, pm_notifier); + struct opp *opp; + unsigned long maxfreq = ULONG_MAX; + unsigned long freq; + unsigned long volt; + int err = 0; + + switch (event) { + case PM_SUSPEND_PREPARE: + /* Set Fastest and Deactivate DVFS */ + mutex_lock(&data->lock); + + data->disabled = true; + + rcu_read_lock(); + opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + err = PTR_ERR(opp); + goto unlock; + } + freq = opp_get_freq(opp); + volt = opp_get_voltage(opp); + rcu_read_unlock(); + + err = exynos5_int_setvolt(data, volt); + if (err) + goto unlock; + + err = clk_set_rate(data->int_clk, freq * 1000); + + if (err) + goto unlock; + + data->curr_freq = freq; +unlock: + mutex_unlock(&data->lock); + if (err) + return NOTIFY_BAD; + return NOTIFY_OK; + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + /* Reactivate */ + mutex_lock(&data->lock); + data->disabled = false; + mutex_unlock(&data->lock); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int exynos5_busfreq_int_probe(struct platform_device *pdev) +{ + struct busfreq_data_int *data; + struct opp *opp; + struct device *dev = &pdev->dev; + struct device_node *np; + unsigned long initial_freq; + unsigned long initial_volt; + int err = 0; + int i; + + data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int), + GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu"); + if (np == NULL) { + pr_err("Unable to find PPMU node\n"); + return -ENOENT; + } + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + /* map PPMU memory region */ + data->ppmu[i].hw_base = of_iomap(np, i); + if (data->ppmu[i].hw_base == NULL) { + dev_err(&pdev->dev, "failed to map memory region\n"); + return -ENOMEM; + } + } + data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event; + data->dev = dev; + mutex_init(&data->lock); + + err = exynos5250_init_int_tables(data); + if (err) + goto err_regulator; + + data->vdd_int = regulator_get(dev, "vdd_int"); + if (IS_ERR(data->vdd_int)) { + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); + err = PTR_ERR(data->vdd_int); + goto err_regulator; + } + + data->int_clk = clk_get(dev, "int_clk"); + if (IS_ERR(data->int_clk)) { + dev_err(dev, "Cannot get clock \"int_clk\"\n"); + err = PTR_ERR(data->int_clk); + goto err_clock; + } + + rcu_read_lock(); + opp = opp_find_freq_floor(dev, + &exynos5_devfreq_int_profile.initial_freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dev, "Invalid initial frequency %lu kHz.\n", + exynos5_devfreq_int_profile.initial_freq); + err = PTR_ERR(opp); + goto err_opp_add; + } + initial_freq = opp_get_freq(opp); + initial_volt = opp_get_voltage(opp); + rcu_read_unlock(); + data->curr_freq = initial_freq; + + err = clk_set_rate(data->int_clk, initial_freq * 1000); + if (err) { + dev_err(dev, "Failed to set initial frequency\n"); + goto err_opp_add; + } + + err = exynos5_int_setvolt(data, initial_volt); + if (err) + goto err_opp_add; + + platform_set_drvdata(pdev, data); + + busfreq_mon_reset(data); + + data->devfreq = devfreq_add_device(dev, &exynos5_devfreq_int_profile, + "simple_ondemand", NULL); + + if (IS_ERR(data->devfreq)) { + err = PTR_ERR(data->devfreq); + goto err_devfreq_add; + } + + devfreq_register_opp_notifier(dev, data->devfreq); + + err = register_pm_notifier(&data->pm_notifier); + if (err) { + dev_err(dev, "Failed to setup pm notifier\n"); + goto err_devfreq_add; + } + + /* TODO: Add a new QOS class for int/mif bus */ + pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1); + + return 0; + +err_devfreq_add: + devfreq_remove_device(data->devfreq); + platform_set_drvdata(pdev, NULL); +err_opp_add: + clk_put(data->int_clk); +err_clock: + regulator_put(data->vdd_int); +err_regulator: + return err; +} + +static int exynos5_busfreq_int_remove(struct platform_device *pdev) +{ + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + pm_qos_remove_request(&data->int_req); + unregister_pm_notifier(&data->pm_notifier); + devfreq_remove_device(data->devfreq); + regulator_put(data->vdd_int); + clk_put(data->int_clk); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static int exynos5_busfreq_int_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + busfreq_mon_reset(data); + return 0; +} + +static const struct dev_pm_ops exynos5_busfreq_int_pm = { + .resume = exynos5_busfreq_int_resume, +}; + +/* platform device pointer for exynos5 devfreq device. */ +static struct platform_device *exynos5_devfreq_pdev; + +static struct platform_driver exynos5_busfreq_int_driver = { + .probe = exynos5_busfreq_int_probe, + .remove = exynos5_busfreq_int_remove, + .driver = { + .name = "exynos5-bus-int", + .owner = THIS_MODULE, + .pm = &exynos5_busfreq_int_pm, + }, +}; + +static int __init exynos5_busfreq_int_init(void) +{ + int ret; + + ret = platform_driver_register(&exynos5_busfreq_int_driver); + if (ret < 0) + goto out; + + exynos5_devfreq_pdev = + platform_device_register_simple("exynos5-bus-int", -1, NULL, 0); + if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) { + ret = PTR_ERR(exynos5_devfreq_pdev); + goto out1; + } + + return 0; +out1: + platform_driver_unregister(&exynos5_busfreq_int_driver); +out: + return ret; +} +late_initcall(exynos5_busfreq_int_init); + +static void __exit exynos5_busfreq_int_exit(void) +{ + platform_device_unregister(exynos5_devfreq_pdev); + platform_driver_unregister(&exynos5_busfreq_int_driver); +} +module_exit(exynos5_busfreq_int_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework"); diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c new file mode 100644 index 0000000..85fc5ac --- /dev/null +++ b/drivers/devfreq/exynos/exynos_ppmu.c @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS - PPMU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include "exynos_ppmu.h" + +void exynos_ppmu_reset(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base); + __raw_writel(PPMU_ENABLE_CYCLE | + PPMU_ENABLE_COUNT0 | + PPMU_ENABLE_COUNT1 | + PPMU_ENABLE_COUNT2 | + PPMU_ENABLE_COUNT3, + ppmu_base + PPMU_CNTENS); +} + +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, + unsigned int evt) +{ + __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch)); +} + +void exynos_ppmu_start(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_ENABLE, ppmu_base); +} + +void exynos_ppmu_stop(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_DISABLE, ppmu_base); +} + +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch) +{ + unsigned int total; + + if (ch == PPMU_PMNCNT3) + total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) | + __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1))); + else + total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch)); + + return total; +} diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h new file mode 100644 index 0000000..7dfb221 --- /dev/null +++ b/drivers/devfreq/exynos/exynos_ppmu.h @@ -0,0 +1,78 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS PPMU header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __DEVFREQ_EXYNOS_PPMU_H +#define __DEVFREQ_EXYNOS_PPMU_H __FILE__ + +#include + +/* For PPMU Control */ +#define PPMU_ENABLE BIT(0) +#define PPMU_DISABLE 0x0 +#define PPMU_CYCLE_RESET BIT(1) +#define PPMU_COUNTER_RESET BIT(2) + +#define PPMU_ENABLE_COUNT0 BIT(0) +#define PPMU_ENABLE_COUNT1 BIT(1) +#define PPMU_ENABLE_COUNT2 BIT(2) +#define PPMU_ENABLE_COUNT3 BIT(3) +#define PPMU_ENABLE_CYCLE BIT(31) + +#define PPMU_CNTENS 0x10 +#define PPMU_FLAG 0x50 +#define PPMU_CCNT_OVERFLOW BIT(31) +#define PPMU_CCNT 0x100 + +#define PPMU_PMCNT0 0x110 +#define PPMU_PMCNT_OFFSET 0x10 +#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x)) + +#define PPMU_BEVT0SEL 0x1000 +#define PPMU_BEVTSEL_OFFSET 0x100 +#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET)) + +/* For Event Selection */ +#define RD_DATA_COUNT 0x5 +#define WR_DATA_COUNT 0x6 +#define RDWR_DATA_COUNT 0x7 + +enum ppmu_counter { + PPMU_PMNCNT0, + PPMU_PMCCNT1, + PPMU_PMNCNT2, + PPMU_PMNCNT3, + PPMU_PMNCNT_MAX, +}; + +struct bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +struct exynos_ppmu { + void __iomem *hw_base; + unsigned int ccnt; + unsigned int event[PPMU_PMNCNT_MAX]; + unsigned int count[PPMU_PMNCNT_MAX]; + unsigned long long ns; + ktime_t reset_time; + bool ccnt_overflow; + bool count_overflow[PPMU_PMNCNT_MAX]; +}; + +void exynos_ppmu_reset(void __iomem *ppmu_base); +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, + unsigned int evt); +void exynos_ppmu_start(void __iomem *ppmu_base); +void exynos_ppmu_stop(void __iomem *ppmu_base); +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch); +#endif /* __DEVFREQ_EXYNOS_PPMU_H */ -- cgit v0.10.2 From 39688ce6facd63de796def41a0b9012882b5cc14 Mon Sep 17 00:00:00 2001 From: Rajagopal Venkat Date: Tue, 8 Jan 2013 11:20:39 +0530 Subject: PM / devfreq: account suspend/resume for stats devfreq stats is not taking device suspend and resume into account. Fix it. Signed-off-by: Rajagopal Venkat Acked-by: MyungJoo Ham diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 3b36797..abfa14d 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -271,6 +271,7 @@ void devfreq_monitor_suspend(struct devfreq *devfreq) return; } + devfreq_update_status(devfreq, devfreq->previous_freq); devfreq->stop_polling = true; mutex_unlock(&devfreq->lock); cancel_delayed_work_sync(&devfreq->work); @@ -287,6 +288,8 @@ EXPORT_SYMBOL(devfreq_monitor_suspend); */ void devfreq_monitor_resume(struct devfreq *devfreq) { + unsigned long freq; + mutex_lock(&devfreq->lock); if (!devfreq->stop_polling) goto out; @@ -295,8 +298,14 @@ void devfreq_monitor_resume(struct devfreq *devfreq) devfreq->profile->polling_ms) queue_delayed_work(devfreq_wq, &devfreq->work, msecs_to_jiffies(devfreq->profile->polling_ms)); + + devfreq->last_stat_updated = jiffies; devfreq->stop_polling = false; + if (devfreq->profile->get_cur_freq && + !devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq)) + devfreq->previous_freq = freq; + out: mutex_unlock(&devfreq->lock); } @@ -905,11 +914,11 @@ static ssize_t show_trans_table(struct device *dev, struct device_attribute *att { struct devfreq *devfreq = to_devfreq(dev); ssize_t len; - int i, j, err; + int i, j; unsigned int max_state = devfreq->profile->max_state; - err = devfreq_update_status(devfreq, devfreq->previous_freq); - if (err) + if (!devfreq->stop_polling && + devfreq_update_status(devfreq, devfreq->previous_freq)) return 0; len = sprintf(buf, " From : To\n"); -- cgit v0.10.2 From de9c739435b47e7d39e448b2cc4c8154cabc9e5a Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Tue, 5 Feb 2013 18:40:17 +0900 Subject: PM / devfreq: add comments and Documentation - Added missing ABI documents - Added comments to clarify the objectives of functions Signed-off-by: MyungJoo Ham Acked-by: Nishanth Menon Acked-by: Rajagopal Venkat diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 0ba6ea2..ee39aca 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -78,3 +78,23 @@ Contact: Nishanth Menon Description: The /sys/class/devfreq/.../available_governors shows currently available governors in the system. + +What: /sys/class/devfreq/.../min_freq +Date: January 2013 +Contact: MyungJoo Ham +Description: + The /sys/class/devfreq/.../min_freq shows and stores + the minimum frequency requested by users. It is 0 if + the user does not care. min_freq overrides the + frequency requested by governors. + +What: /sys/class/devfreq/.../max_freq +Date: January 2013 +Contact: MyungJoo Ham +Description: + The /sys/class/devfreq/.../max_freq shows and stores + the maximum frequency requested by users. It is 0 if + the user does not care. max_freq overrides the + frequency requested by governors and min_freq. + The max_freq overrides min_freq because max_freq may be + used to throttle devices to avoid overheating. diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index abfa14d..44c4079 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -527,6 +527,8 @@ EXPORT_SYMBOL(devfreq_add_device); /** * devfreq_remove_device() - Remove devfreq feature from a device. * @devfreq: the devfreq instance to be removed + * + * The opposite of devfreq_add_device(). */ int devfreq_remove_device(struct devfreq *devfreq) { @@ -542,6 +544,10 @@ EXPORT_SYMBOL(devfreq_remove_device); /** * devfreq_suspend_device() - Suspend devfreq of a device. * @devfreq: the devfreq instance to be suspended + * + * This function is intended to be called by the pm callbacks + * (e.g., runtime_suspend, suspend) of the device driver that + * holds the devfreq. */ int devfreq_suspend_device(struct devfreq *devfreq) { @@ -559,6 +565,10 @@ EXPORT_SYMBOL(devfreq_suspend_device); /** * devfreq_resume_device() - Resume devfreq of a device. * @devfreq: the devfreq instance to be resumed + * + * This function is intended to be called by the pm callbacks + * (e.g., runtime_resume, resume) of the device driver that + * holds the devfreq. */ int devfreq_resume_device(struct devfreq *devfreq) { diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index fe8c447..5f1ab92 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -181,6 +181,8 @@ extern struct devfreq *devfreq_add_device(struct device *dev, const char *governor_name, void *data); extern int devfreq_remove_device(struct devfreq *devfreq); + +/* Supposed to be called by PM_SLEEP/PM_RUNTIME callbacks */ extern int devfreq_suspend_device(struct devfreq *devfreq); extern int devfreq_resume_device(struct devfreq *devfreq); -- cgit v0.10.2 From 5751cdc0c9337b4f5fdd05f45ca3483e7cd7a708 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Feb 2013 12:33:50 +0800 Subject: PM / devfreq: fix missing unlock on error in exynos4_busfreq_pm_notifier_event() Add the missing unlock before return from function exynos4_busfreq_pm_notifier_event() in the error handling case. This issue introduced by commit 8fa938 (PM / devfreq: exynos4_bus: honor RCU lock usage) Signed-off-by: Wei Yongjun [Resolved path conflicts by MyungJoo Ham] Signed-off-by: MyungJoo Ham diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c index 3f37f3b..c5f86d8 100644 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ b/drivers/devfreq/exynos/exynos4_bus.c @@ -974,6 +974,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, rcu_read_unlock(); dev_err(data->dev, "%s: unable to find a min freq\n", __func__); + mutex_unlock(&data->lock); return PTR_ERR(opp); } new_oppinfo.rate = opp_get_freq(opp); -- cgit v0.10.2 From fe98461feac4557bc3110ec5a2847fd21c722b73 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 13 Mar 2013 22:10:02 +0100 Subject: PM / devfreq: fix typo "CPU_EXYNOS4.12" twice Dependencies on CPU_EXYNOS4212 and CPU_EXYNOS4412 for the "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" were added in commit 7b4050381127ae11fcfc74a106d715a5fbbf888a ("PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412."). The tree (at that time, v3.3, and currently) makes clear that this should have been dependencies on SOC_EXYNOS4212 and SOC_EXYNOS4412. Signed-off-by: Paul Bolle diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 1560d0d..31f3adb 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -67,7 +67,7 @@ comment "DEVFREQ Drivers" config ARM_EXYNOS4_BUS_DEVFREQ bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" - depends on CPU_EXYNOS4210 || CPU_EXYNOS4212 || CPU_EXYNOS4412 + depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 select ARCH_HAS_OPP select DEVFREQ_GOV_SIMPLE_ONDEMAND help -- cgit v0.10.2 From 88476d34ea3cc20c7357cbc5543082360815ad05 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Thu, 14 Mar 2013 17:28:24 +0900 Subject: MAINTAINERS: update mailing list for devfreq(DVFS). Devfreq is a power-management framework. Thus linux-pm mailing list is recommended. Signed-off-by: MyungJoo Ham diff --git a/MAINTAINERS b/MAINTAINERS index f35a259..7c875d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2516,7 +2516,7 @@ F: drivers/usb/dwc3/ DEVICE FREQUENCY (DEVFREQ) M: MyungJoo Ham M: Kyungmin Park -L: linux-kernel@vger.kernel.org +L: linux-pm@vger.kernel.org S: Maintained F: drivers/devfreq/ -- cgit v0.10.2 From d6f346f2d2bf511c2c59176121a6e42ce60173a0 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 28 May 2013 15:51:54 +0000 Subject: cpuidle: improve governor Kconfig options Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system. The Kconfig does not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line. Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor. Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it. The governors will be enabled depending on the CONFIG_NO_HZ option: - If CONFIG_NO_HZ is set, then the menu governor is selected and the ladder governor is optional, defaulting to 'yes' - If CONFIG_NO_HZ is not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'yes' Signed-off-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index c4cc27e..e997f15 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -1,7 +1,9 @@ -config CPU_IDLE +menuconfig CPU_IDLE bool "CPU idle PM support" default y if ACPI || PPC_PSERIES + select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE) + select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform @@ -9,9 +11,10 @@ config CPU_IDLE If you're using an ACPI-enabled platform, you should say Y here. +if CPU_IDLE + config CPU_IDLE_MULTIPLE_DRIVERS bool "Support multiple cpuidle drivers" - depends on CPU_IDLE default n help Allows the cpuidle framework to use different drivers for each CPU. @@ -19,24 +22,19 @@ config CPU_IDLE_MULTIPLE_DRIVERS states. If unsure say N. config CPU_IDLE_GOV_LADDER - bool - depends on CPU_IDLE + bool "Ladder governor (for periodic timer tick)" default y config CPU_IDLE_GOV_MENU - bool - depends on CPU_IDLE && NO_HZ + bool "Menu governor (for tickless system)" default y config ARCH_NEEDS_CPU_IDLE_COUPLED def_bool n -if CPU_IDLE - config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK help Select this to enable cpuidle on Calxeda processors. - endif -- cgit v0.10.2 From cd38ca854de15b26eb91009137cbe157d8a8e773 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 3 Jun 2013 18:20:29 +0000 Subject: PM / Hibernate: print physical addresses consistently with other parts of kernel Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. Commit 69f1d475cc did this for a similar printk in this file, but I must have missed this one. Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 0de2857..7872a35 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -642,8 +642,9 @@ __register_nosave_region(unsigned long start_pfn, unsigned long end_pfn, region->end_pfn = end_pfn; list_add_tail(®ion->list, &nosave_regions); Report: - printk(KERN_INFO "PM: Registered nosave memory: %016lx - %016lx\n", - start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); + printk(KERN_INFO "PM: Registered nosave memory: [mem %#010llx-%#010llx]\n", + (unsigned long long) start_pfn << PAGE_SHIFT, + ((unsigned long long) end_pfn << PAGE_SHIFT) - 1); } /* -- cgit v0.10.2 From 45f0a85c8258741d11bda25c0a5669c06267204a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 3 Jun 2013 21:49:52 +0200 Subject: PM / Runtime: Rework the "runtime idle" helper routine The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg Tested-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki Acked-by: Kevin Hilman Reviewed-by: Ulf Hansson Acked-by: Alan Stern diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 6c9f5d9..6c470c7 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -660,11 +660,6 @@ Subsystems may wish to conserve code space by using the set of generic power management callbacks provided by the PM core, defined in driver/base/power/generic_ops.c: - int pm_generic_runtime_idle(struct device *dev); - - invoke the ->runtime_idle() callback provided by the driver of this - device, if defined, and call pm_runtime_suspend() for this device if the - return value is 0 or the callback is not defined - int pm_generic_runtime_suspend(struct device *dev); - invoke the ->runtime_suspend() callback provided by the driver of this device and return its result, or return -EINVAL if not defined diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index e6d2307..e37feb2 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -591,11 +591,6 @@ static int _od_runtime_suspend(struct device *dev) return ret; } -static int _od_runtime_idle(struct device *dev) -{ - return pm_generic_runtime_idle(dev); -} - static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -653,7 +648,7 @@ static int _od_resume_noirq(struct device *dev) struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, - _od_runtime_idle) + NULL) USE_PLATFORM_PM_SLEEP_OPS .suspend_noirq = _od_suspend_noirq, .resume_noirq = _od_resume_noirq, diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index bc493aa..1eb8b62 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -886,7 +886,6 @@ static struct dev_pm_domain acpi_general_pm_domain = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = acpi_subsys_runtime_suspend, .runtime_resume = acpi_subsys_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif #ifdef CONFIG_PM_SLEEP .prepare = acpi_subsys_prepare, diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index cdbad3a..c670727 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -284,7 +284,7 @@ static const struct dev_pm_ops amba_pm = { SET_RUNTIME_PM_OPS( amba_pm_runtime_suspend, amba_pm_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743b..84e3b62 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5430,7 +5430,7 @@ static int ata_port_runtime_idle(struct device *dev) return -EBUSY; } - return pm_runtime_suspend(dev); + return 0; } static int ata_port_runtime_suspend(struct device *dev) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9eda842..96a9303 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -888,7 +888,6 @@ int platform_pm_restore(struct device *dev) static const struct dev_pm_ops platform_dev_pm_ops = { .runtime_suspend = pm_generic_runtime_suspend, .runtime_resume = pm_generic_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, USE_PLATFORM_PM_SLEEP_OPS }; diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 7072404..bfb8955 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2143,7 +2143,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->max_off_time_changed = true; genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; - genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; genpd->domain.ops.suspend_late = pm_genpd_suspend_late; diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index bfd898b..5ee030a 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -12,29 +12,6 @@ #ifdef CONFIG_PM_RUNTIME /** - * pm_generic_runtime_idle - Generic runtime idle callback for subsystems. - * @dev: Device to handle. - * - * If PM operations are defined for the @dev's driver and they include - * ->runtime_idle(), execute it and return its error code, if nonzero. - * Otherwise, execute pm_runtime_suspend() for the device and return 0. - */ -int pm_generic_runtime_idle(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm && pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } - - pm_runtime_suspend(dev); - return 0; -} -EXPORT_SYMBOL_GPL(pm_generic_runtime_idle); - -/** * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems. * @dev: Device to suspend. * diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index ef13ad08..268a350 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -293,11 +293,8 @@ static int rpm_idle(struct device *dev, int rpmflags) /* Pending requests need to be canceled. */ dev->power.request = RPM_REQ_NONE; - if (dev->power.no_callbacks) { - /* Assume ->runtime_idle() callback would have suspended. */ - retval = rpm_suspend(dev, rpmflags); + if (dev->power.no_callbacks) goto out; - } /* Carry out an asynchronous or a synchronous idle notification. */ if (rpmflags & RPM_ASYNC) { @@ -306,7 +303,8 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.request_pending = true; queue_work(pm_wq, &dev->power.work); } - goto out; + trace_rpm_return_int(dev, _THIS_IP_, 0); + return 0; } dev->power.idle_notification = true; @@ -326,14 +324,14 @@ static int rpm_idle(struct device *dev, int rpmflags) callback = dev->driver->pm->runtime_idle; if (callback) - __rpm_callback(callback, dev); + retval = __rpm_callback(callback, dev); dev->power.idle_notification = false; wake_up_all(&dev->power.wait_queue); out: trace_rpm_return_int(dev, _THIS_IP_, retval); - return retval; + return retval ? retval : rpm_suspend(dev, rpmflags); } /** diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index a0de82e..a975ebe 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1405,7 +1405,7 @@ static int dma_runtime_idle(struct device *dev) return -EAGAIN; } - return pm_schedule_suspend(dev, 0); + return 0; } /****************************************************************************** diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index 62ef10a..89d0d2a3 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -305,11 +305,7 @@ static const struct irq_domain_ops lnw_gpio_irq_ops = { static int lnw_gpio_runtime_idle(struct device *dev) { - int err = pm_schedule_suspend(dev, 500); - - if (!err) - return 0; - + pm_schedule_suspend(dev, 500); return -EBUSY; } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 48e31ed..f32ca29 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -435,7 +435,7 @@ static const struct dev_pm_ops i2c_device_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 13f7866..3598b0e 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -886,12 +886,6 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) return ret; } -static int ab8500_gpadc_runtime_idle(struct device *dev) -{ - pm_runtime_suspend(dev); - return 0; -} - static int ab8500_gpadc_suspend(struct device *dev) { struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); @@ -1039,7 +1033,7 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) static const struct dev_pm_ops ab8500_gpadc_pm_ops = { SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, ab8500_gpadc_runtime_resume, - ab8500_gpadc_runtime_idle) + NULL) SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, ab8500_gpadc_resume) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index e219c97..9d5c711 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -164,7 +164,7 @@ static int mmc_runtime_resume(struct device *dev) static int mmc_runtime_idle(struct device *dev) { - return pm_runtime_suspend(dev); + return 0; } #endif /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 546c67c..6d67492 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -211,7 +211,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 79277fb..e6515e2 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1050,26 +1050,22 @@ static int pci_pm_runtime_idle(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int ret = 0; /* * If pci_dev->driver is not set (unbound), the device should * always remain in D0 regardless of the runtime PM status */ if (!pci_dev->driver) - goto out; + return 0; if (!pm) return -ENOSYS; - if (pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } + if (pm->runtime_idle) + ret = pm->runtime_idle(dev); -out: - pm_runtime_suspend(dev); - return 0; + return ret; } #else /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 42539ee..4c5aabe 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -229,8 +229,6 @@ static int scsi_runtime_resume(struct device *dev) static int scsi_runtime_idle(struct device *dev) { - int err; - dev_dbg(dev, "scsi_runtime_idle\n"); /* Insert hooks here for targets, hosts, and transport classes */ @@ -240,14 +238,11 @@ static int scsi_runtime_idle(struct device *dev) if (sdev->request_queue->dev) { pm_runtime_mark_last_busy(dev); - err = pm_runtime_autosuspend(dev); - } else { - err = pm_runtime_suspend(dev); + pm_runtime_autosuspend(dev); + return -EBUSY; } - } else { - err = pm_runtime_suspend(dev); } - return err; + return 0; } int scsi_autopm_get_device(struct scsi_device *sdev) diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index afe9282..8afa5a4 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -25,7 +25,7 @@ static int default_platform_runtime_idle(struct device *dev) { /* suspend synchronously to disable clocks immediately */ - return pm_runtime_suspend(dev); + return 0; } static struct dev_pm_domain default_pm_domain = { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 32b7bb1..095cfad 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -223,7 +223,7 @@ static const struct dev_pm_ops spi_pm = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 5f4765a..5dfcf3b 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1248,13 +1248,8 @@ static int serial_hsu_resume(struct pci_dev *pdev) #ifdef CONFIG_PM_RUNTIME static int serial_hsu_runtime_idle(struct device *dev) { - int err; - - err = pm_schedule_suspend(dev, 500); - if (err) - return -EBUSY; - - return 0; + pm_schedule_suspend(dev, 500); + return -EBUSY; } static int serial_hsu_runtime_suspend(struct device *dev) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 6eab440..7609ac4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1765,7 +1765,8 @@ int usb_runtime_idle(struct device *dev) */ if (autosuspend_check(udev) == 0) pm_runtime_autosuspend(dev); - return 0; + /* Tell the core not to suspend it, though. */ + return -EBUSY; } int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index b8bad29..8c1b2c5 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -141,7 +141,6 @@ static const struct dev_pm_ops usb_port_pm_ops = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif }; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 7d7e09e..6fa7cea 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -37,7 +37,6 @@ extern void pm_runtime_enable(struct device *dev); extern void __pm_runtime_disable(struct device *dev, bool check_resume); extern void pm_runtime_allow(struct device *dev); extern void pm_runtime_forbid(struct device *dev); -extern int pm_generic_runtime_idle(struct device *dev); extern int pm_generic_runtime_suspend(struct device *dev); extern int pm_generic_runtime_resume(struct device *dev); extern void pm_runtime_no_callbacks(struct device *dev); @@ -143,7 +142,6 @@ static inline bool pm_runtime_active(struct device *dev) { return true; } static inline bool pm_runtime_status_suspended(struct device *dev) { return false; } static inline bool pm_runtime_enabled(struct device *dev) { return false; } -static inline int pm_generic_runtime_idle(struct device *dev) { return 0; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } static inline int pm_generic_runtime_resume(struct device *dev) { return 0; } static inline void pm_runtime_no_callbacks(struct device *dev) {} -- cgit v0.10.2 From 43d51af489126305dbacc1b8ebd1ce4797d277ea Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 3 Jun 2013 21:49:59 +0200 Subject: PM / Runtime: Update .runtime_idle() callback documentation Runtime PM documentation needs to be updated after the previous change of the rpm_idle() behavior, so modify it as appropriate. [rjw: Subject and changelog] Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 6c470c7..71d8fe4 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -144,8 +144,12 @@ The action performed by the idle callback is totally dependent on the subsystem (or driver) in question, but the expected and recommended action is to check if the device can be suspended (i.e. if all of the conditions necessary for suspending the device are satisfied) and to queue up a suspend request for the -device in that case. The value returned by this callback is ignored by the PM -core. +device in that case. If there is no idle callback, or if the callback returns +0, then the PM core will attempt to carry out a runtime suspend of the device; +in essence, it will call pm_runtime_suspend() directly. To prevent this (for +example, if the callback routine has started a delayed suspend), the routine +should return a non-zero value. Negative error return codes are ignored by the +PM core. The helper functions provided by the PM core, described in Section 4, guarantee that the following constraints are met with respect to runtime PM callbacks for @@ -301,9 +305,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: removing the device from device hierarchy int pm_runtime_idle(struct device *dev); - - execute the subsystem-level idle callback for the device; returns 0 on - success or error code on failure, where -EINPROGRESS means that - ->runtime_idle() is already being executed + - execute the subsystem-level idle callback for the device; returns an + error code on failure, where -EINPROGRESS means that ->runtime_idle() is + already being executed; if there is no callback or the callback returns 0 + then run pm_runtime_suspend(dev) and return its result int pm_runtime_suspend(struct device *dev); - execute the subsystem-level suspend callback for the device; returns 0 on -- cgit v0.10.2 From 5070158804b5339c71809f5e673cea1cfacd804d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 30 Mar 2013 16:25:15 +0530 Subject: cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar Acked-by: Simon Horman Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index a3585ea..19fa98e 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -186,7 +186,7 @@ As most cpufreq processors only allow for being set to a few specific frequencies, a "frequency table" with some functions might assist in some work of the processor driver. Such a "frequency table" consists of an array of struct cpufreq_frequency_table entries, with any value in -"index" you want to use, and the corresponding frequency in +"driver_data" you want to use, and the corresponding frequency in "frequency". At the end of the table, you need to add a cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And if you want to skip one entry in the table, set the frequency to @@ -214,10 +214,4 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, is the corresponding frequency table helper for the ->target stage. Just pass the values to this function, and the unsigned int index returns the number of the frequency table entry which contains -the frequency the CPU shall be set to. PLEASE NOTE: This is not the -"index" which is in this cpufreq_table_entry.index, but instead -cpufreq_table[index]. So, the new frequency is -cpufreq_table[index].frequency, and the value you stored into the -frequency table "index" field is -cpufreq_table[index].index. - +the frequency the CPU shall be set to. diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 4d69338..a0d4f60 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1004,7 +1004,7 @@ static const struct da850_opp da850_opp_96 = { #define OPP(freq) \ { \ - .index = (unsigned int) &da850_opp_##freq, \ + .driver_data = (unsigned int) &da850_opp_##freq, \ .frequency = freq * 1000, \ } @@ -1016,7 +1016,7 @@ static struct cpufreq_frequency_table da850_freq_table[] = { OPP(200), OPP(96), { - .index = 0, + .driver_data = 0, .frequency = CPUFREQ_TABLE_END, }, }; @@ -1044,7 +1044,7 @@ static int da850_set_voltage(unsigned int index) if (!cvdd) return -ENODEV; - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; + opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data; return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); } @@ -1125,7 +1125,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) struct pll_data *pll = clk->pll_data; int ret; - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; + opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data; prediv = opp->prediv; mult = opp->mult; postdiv = opp->postdiv; diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index ddd8280..2a0aa56 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -60,5 +60,5 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.index, S3C2410_MPLLCON); + __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); } diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 3c0e78e..3513e74 100644 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -70,7 +70,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -431,7 +431,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); suspend_freq = s3c_cpufreq_get(0) * 1000; return 0; diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index dcf3420..5e37d36 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -33,36 +33,36 @@ #include static struct cpufreq_frequency_table pll_vals_12MHz[] = { - { .frequency = 34000000, .index = PLLVAL(82, 2, 3), }, - { .frequency = 45000000, .index = PLLVAL(82, 1, 3), }, - { .frequency = 51000000, .index = PLLVAL(161, 3, 3), }, - { .frequency = 48000000, .index = PLLVAL(120, 2, 3), }, - { .frequency = 56000000, .index = PLLVAL(142, 2, 3), }, - { .frequency = 68000000, .index = PLLVAL(82, 2, 2), }, - { .frequency = 79000000, .index = PLLVAL(71, 1, 2), }, - { .frequency = 85000000, .index = PLLVAL(105, 2, 2), }, - { .frequency = 90000000, .index = PLLVAL(112, 2, 2), }, - { .frequency = 101000000, .index = PLLVAL(127, 2, 2), }, - { .frequency = 113000000, .index = PLLVAL(105, 1, 2), }, - { .frequency = 118000000, .index = PLLVAL(150, 2, 2), }, - { .frequency = 124000000, .index = PLLVAL(116, 1, 2), }, - { .frequency = 135000000, .index = PLLVAL(82, 2, 1), }, - { .frequency = 147000000, .index = PLLVAL(90, 2, 1), }, - { .frequency = 152000000, .index = PLLVAL(68, 1, 1), }, - { .frequency = 158000000, .index = PLLVAL(71, 1, 1), }, - { .frequency = 170000000, .index = PLLVAL(77, 1, 1), }, - { .frequency = 180000000, .index = PLLVAL(82, 1, 1), }, - { .frequency = 186000000, .index = PLLVAL(85, 1, 1), }, - { .frequency = 192000000, .index = PLLVAL(88, 1, 1), }, - { .frequency = 203000000, .index = PLLVAL(161, 3, 1), }, + { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, + { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, + { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, + { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, + { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, + { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), }, + { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), }, + { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), }, + { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), }, + { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), }, + { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), }, + { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), }, + { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), }, + { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), }, + { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), }, + { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), }, + { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), }, + { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), }, + { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), }, + { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), }, /* 2410A extras */ - { .frequency = 210000000, .index = PLLVAL(132, 2, 1), }, - { .frequency = 226000000, .index = PLLVAL(105, 1, 1), }, - { .frequency = 266000000, .index = PLLVAL(125, 1, 1), }, - { .frequency = 268000000, .index = PLLVAL(126, 1, 1), }, - { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, + { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), }, + { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), }, + { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), }, + { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), }, + { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), }, }; static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index 6737817..a19460e 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -21,33 +21,33 @@ #include static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { - { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ - { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ - { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ - { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ - { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ - { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ - { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ - { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ - { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ - { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ - { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ - { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ - { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ - { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ - { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ - { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ - { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ - { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ - { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ - { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ - { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ - { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ - { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ - { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ - { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ - { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ - { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ + { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ + { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ + { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ + { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ + { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ + { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ + { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ + { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ + { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ + { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ + { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ + { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ + { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ + { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ + { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ + { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ + { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ + { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ + { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ + { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ + { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ + { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ + { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ + { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ + { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ + { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ + { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index debfa10..1191b29 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -21,61 +21,61 @@ #include static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { - { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ - { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ - { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ - { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ - { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ - { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ - { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ - { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ - { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ - { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ - { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ - { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ - { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ - { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ - { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ - { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ - { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ - { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ - { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ - { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ - { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ - { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ - { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ - { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ - { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ - { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ - { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ - { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ - { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ - { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ - { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ - { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ - { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ - { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ - { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ - { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ - { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ - { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ - { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ - { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ - { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ - { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ - { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ - { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ - { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ - { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ - { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ - { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ - { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ - { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ - { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ - { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ - { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ - { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ - { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ + { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ + { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ + { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ + { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ + { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ + { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ + { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ + { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ + { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ + { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ + { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ + { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ + { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ + { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ + { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ + { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ + { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ + { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ + { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ + { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ + { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ + { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ + { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ + { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ + { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ + { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ + { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ + { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ + { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ + { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ + { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ + { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ + { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ + { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ + { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ + { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ + { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ + { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ + { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ + { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ + { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ + { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ + { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ + { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ + { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ + { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ + { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ + { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ + { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ + { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ + { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ + { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ + { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ + { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ + { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; static int s3c2440_plls169344_add(struct device *dev, diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 7e10593..5390c6b 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -142,15 +142,15 @@ static void pllc2_table_rebuild(struct clk *clk) /* Initialise PLLC2 frequency table */ for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) { pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; } /* This is a special entry - switching PLL off makes it a repeater */ pllc2_freq_table[i].frequency = clk->parent->rate; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; } static unsigned long pllc2_recalc(struct clk *clk) diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 95509d8..a8a760d 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -285,7 +285,7 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, s3c_freq_dbg("%s: { %d = %u kHz }\n", __func__, index, freq); - table[index].index = index; + table[index].driver_data = index; table[index].frequency = freq; } diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c index bc739d4..4dc2f5f 100644 --- a/arch/mips/loongson/lemote-2f/clock.c +++ b/arch/mips/loongson/lemote-2f/clock.c @@ -121,7 +121,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk->rate = rate; regval = LOONGSON_CHIPCFG0; - regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); + regval = (regval & ~0x7) | + (loongson2_clockmod_table[i].driver_data - 1); LOONGSON_CHIPCFG0 = regval; return ret; diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index be1e795..b704da4 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -204,7 +204,8 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000; + pas_freqs[i].frequency = + get_astate_freq(pas_freqs[i].driver_data) * 100000; pr_debug("%d: %d\n", i, pas_freqs[i].frequency); } @@ -280,7 +281,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy, pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", policy->cpu, pas_freqs[pas_astate_new].frequency, - pas_freqs[pas_astate_new].index); + pas_freqs[pas_astate_new].driver_data); current_astate = pas_astate_new; diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index f0077cb..c8ec186 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -648,14 +648,14 @@ int opp_init_cpufreq_table(struct device *dev, list_for_each_entry(opp, &dev_opp->opp_list, node) { if (opp->available) { - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = opp->rate / 1000; i++; } } mutex_unlock(&dev_opp_list_lock); - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 8c02622..0d25677 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) perf = data->acpi_data; for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) + if (msr == perf->states[data->freq_table[i].driver_data].status) return data->freq_table[i].frequency; } return data->freq_table[0].frequency; @@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, goto out; } - next_perf_state = data->freq_table[next_state].index; + next_perf_state = data->freq_table[next_state].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -811,7 +811,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->freq_table[valid_states-1].frequency / 1000) continue; - data->freq_table[valid_states].index = i; + data->freq_table[valid_states].driver_data = i; data->freq_table[valid_states].frequency = perf->states[i].core_frequency * 1000; valid_states++; diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index 995511e80..9cdbbd2 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -20,23 +20,23 @@ /* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ static struct cpufreq_frequency_table bfin_freq_table[] = { { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, { .frequency = CPUFREQ_TABLE_END, - .index = 1, + .driver_data = 1, }, { .frequency = CPUFREQ_TABLE_END, - .index = 2, + .driver_data = 2, }, { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, }; diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 37380fb..324aff2 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -188,7 +188,7 @@ static int eps_target(struct cpufreq_policy *policy, } /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; + dest_state = centaur->freq_table[newstate].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) printk(KERN_ERR "eps: Timeout!\n"); @@ -380,9 +380,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) f_table = ¢aur->freq_table[0]; if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; f_table[2].frequency = CPUFREQ_TABLE_END; } else { k = 0; @@ -391,7 +391,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) for (i = min_multiplier; i <= max_multiplier; i++) { voltage = (k * step) / 256 + min_voltage; f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; + f_table[k].driver_data = (i << 8) | voltage; k++; } f_table[k].frequency = CPUFREQ_TABLE_END; diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index d7a7966..f0d8741 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, continue; } - pr_debug("table entry %u: %u kHz, %u index\n", - i, freq, table[i].index); + pr_debug("table entry %u: %u kHz, %u driver_data\n", + i, freq, table[i].driver_data); if (freq < min_freq) min_freq = freq; if (freq > max_freq) @@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, unsigned int *index) { struct cpufreq_frequency_table optimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; struct cpufreq_frequency_table suboptimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; unsigned int i; @@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq <= target_freq) { if (freq >= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq <= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; @@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq >= target_freq) { if (freq <= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq >= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; } } - if (optimal.index > i) { - if (suboptimal.index > i) + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) return -EINVAL; - *index = suboptimal.index; + *index = suboptimal.driver_data; } else - *index = optimal.index; + *index = optimal.driver_data; pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency, - table[*index].index); + table[*index].driver_data); return 0; } diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index c0075db..573c14e 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init ( /* table init */ for (i = 0; i <= data->acpi_data.state_count; i++) { - data->freq_table[i].index = i; + data->freq_table[i].driver_data = i; if (i < data->acpi_data.state_count) { data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index b2644af..c233ea6 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - unsigned int state = kirkwood_freq_table[index].index; + unsigned int state = kirkwood_freq_table[index].driver_data; unsigned long reg; freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index b448638..b6a0a7a 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy, u32 bm_timeout = 1000; unsigned int dir = 0; - mults_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].driver_data; /* Safety precautions */ mult = mults[mults_index & 0x1f]; if (mult == -1) @@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void) if (ratio > maxmult || ratio < minmult) continue; longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; + longhaul_table[k].driver_data = j; k++; } if (k <= 1) { @@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void) if (min_i != j) { swap(longhaul_table[j].frequency, longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); } } @@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { longhaul_index = j; break; } @@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; + longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); @@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; if (vid != current_vid) { longhaul_setstate(policy, i); current_vid = vid; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index d539127..bb838b9 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, freq = ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].index) / 8; + loongson2_clockmod_table[newstate].driver_data) / 8; if (freq < policy->min || freq > policy->max) return -EINVAL; diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 421ef37..9ee7817 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; + freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; if (freqs.new == freqs.old) return 0; @@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); + cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index ea0222a..ea8e103 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - return clock_ratio[(invalue >> 5)&7].index; + return clock_ratio[(invalue >> 5)&7].driver_data; } @@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, unsigned long msrval; struct cpufreq_freqs freqs; - if (clock_ratio[best_i].index > max_multiplier) { + if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); return; } freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; + freqs.new = busfreq * clock_ratio[best_i].driver_data; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; + f = clock_ratio[i].driver_data; if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index 53888da..b9f80b7 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst) fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ + powernow_table[j].driver_data = fid; /* lower 8 bits */ speed = powernow_table[j].frequency; @@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst) maximum_speed = speed; vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, @@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst) mobile_vid_table[vid]%1000); } powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; + powernow_table[number_scales].driver_data = 0; return 0; } @@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index) * vid are the upper 8 bits. */ - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; @@ -373,8 +373,8 @@ static int powernow_acpi_init(void) fid = pc.bits.fid; powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ speed = powernow_table[i].frequency; speed_mhz = speed / 1000; @@ -417,7 +417,7 @@ static int powernow_acpi_init(void) } powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; + powernow_table[i].driver_data = 0; /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index b828efe..51343a1 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data) CPUFREQ_ENTRY_INVALID) { printk(KERN_INFO PFX "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, + data->powernow_table[j].driver_data & 0xff, data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); + data->powernow_table[j].driver_data >> 8); } } if (data->batps) @@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data, for (j = 0; j < data->numps; j++) { int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ freq = find_khz_freq_from_fid(pst[j].fid); powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; + powernow_table[data->numps].driver_data = 0; if (query_current_values_with_pending_wait(data)) { kfree(powernow_table); @@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; + powernow_table[data->acpi_data.state_count].driver_data = 0; data->powernow_table = powernow_table; if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) @@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); index = fid | (vid<<8); - powernow_table[i].index = index; + powernow_table[i].driver_data = index; freq = find_khz_freq_from_fid(fid); powernow_table[i].frequency = freq; @@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, * the cpufreq frequency table in find_psb_table, vid * are the upper 8 bits. */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index e577a1d..5936f8d 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data; pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); } @@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, "1/%d of max frequency\n", policy->cpu, cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); + cbe_freqs[cbe_pmode_new].driver_data); rc = set_pmode(policy->cpu, cbe_pmode_new); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 9e5bc8e..fb3981a 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) /* Generate pxa25x the run cpufreq_frequency_table struct */ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; + pxa255_run_freq_table[i].driver_data = i; } pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; + pxa255_turbo_freq_table[i].driver_data = i; } pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) if (freq > pxa27x_maxfreq) break; pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; } - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index 15d60f8..9c92ef0 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy, return -ENOMEM; for (i = 0; i < num; i++) { - table[i].index = i; + table[i].driver_data = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].index = i; + table[num].driver_data = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 4f1881e..69f2e55 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) goto out; - idx = s3c_freq->freq_table[i].index; + idx = s3c_freq->freq_table[i].driver_data; if (idx == SOURCE_HCLK) to_dvs = 1; diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb5..306d395 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, freqs.old = clk_get_rate(armclk) / 1000; freqs.new = s3c64xx_freq_table[i].frequency; freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data]; if (freqs.old == freqs.new) return 0; diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index f740b13..77a2109 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_disable(); clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; local_irq_enable(); diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c index 306ae46..93061a4 100644 --- a/drivers/cpufreq/sparc-us2e-cpufreq.c +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us2e_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 4; - table[2].index = 3; + table[2].driver_data = 3; table[2].frequency = clock_tick / 6; - table[2].index = 4; + table[2].driver_data = 4; table[2].frequency = clock_tick / 8; - table[2].index = 5; + table[2].driver_data = 5; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c index c71ee14..880ee29 100644 --- a/drivers/cpufreq/sparc-us3-cpufreq.c +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us3_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 32; - table[3].index = 0; + table[3].driver_data = 0; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 156829f..c3efa7f 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void) } for (i = 0; i < cnt; i++) { - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = be32_to_cpup(val++); } - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = CPUFREQ_TABLE_END; spear_cpufreq.freq_tbl = freq_tbl; diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 618e6f4..0915e71 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver; /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ + This is stored as "driver_data" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ } /* @@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) per_cpu(centrino_model, cpu)->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) return per_cpu(centrino_model, cpu)-> op_points[i].frequency; } @@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; + msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 66f8097..ed79d7b 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1724,9 +1724,9 @@ static long round_clock_rate(u8 clock, unsigned long rate) /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .index = ARM_EXTCLK,}, - { .frequency = 400000, .index = ARM_50_OPP,}, - { .frequency = 800000, .index = ARM_100_OPP,}, + { .frequency = 200000, .driver_data = ARM_EXTCLK,}, + { .frequency = 400000, .driver_data = ARM_50_OPP,}, + { .frequency = 800000, .driver_data = ARM_100_OPP,}, { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ { .frequency = CPUFREQ_TABLE_END,}, }; @@ -1901,7 +1901,7 @@ static int set_armss_rate(unsigned long rate) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); + return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data); } static int set_plldsi_rate(unsigned long rate) @@ -3105,7 +3105,7 @@ static void db8500_prcmu_update_cpufreq(void) { if (prcmu_has_arm_maxopp()) { db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].index = ARM_MAX_OPP; + db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; } } diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 7715de2..7472785 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk, else freq = clk->parent->rate * mult / div; - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = freq; } /* Termination entry */ - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 1b5b5ef..d939056 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -410,7 +410,7 @@ extern struct cpufreq_governor cpufreq_gov_conservative; #define CPUFREQ_TABLE_END ~1 struct cpufreq_frequency_table { - unsigned int index; /* any */ + unsigned int driver_data; /* driver specific data, not used by core */ unsigned int frequency; /* kHz - doesn't need to be in ascending * order */ }; -- cgit v0.10.2 From 27209d913e5127a1e7ef6655319a406833462d0c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 29 May 2013 12:23:14 +0530 Subject: cpufreq: MAINTAINERS: Add git tree path for ARM specific updates To reduce cpufreq maintenance load for Rafael, ARM specific patches will be applied by me now. Rafael will pull in these changes on a regular basis (after rc's are released). Additionally, I will be sending pull request for every merge window and rc's (for fixes). Web interface of my tree is available at: https://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=summary Branch names will be: cpufreq-next and cpufreq-fixes. This also prefixes the main tree path with "git ". [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495..92a6624 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2215,7 +2215,8 @@ M: Viresh Kumar L: cpufreq@vger.kernel.org L: linux-pm@vger.kernel.org S: Maintained -T: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git +T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates) F: drivers/cpufreq/ F: include/linux/cpufreq.h -- cgit v0.10.2 From a262e94cdcb961762e5d91e7fcb857bba7d420a0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 31 May 2013 06:15:08 +0000 Subject: cpufreq: remove unnecessary cpufreq_cpu_{get|put}() calls struct cpufreq_policy is already passed as argument to some routines like: __cpufreq_driver_getavg() and so we don't really need to do cpufreq_cpu_get() before and cpufreq_cpu_put() in them to get a policy structure. Remove them. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index ce9273a7..f8c2860 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1572,10 +1572,6 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, { int ret = -EINVAL; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - goto no_policy; - if (unlikely(lock_policy_rwsem_write(policy->cpu))) goto fail; @@ -1584,30 +1580,19 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, unlock_policy_rwsem_write(policy->cpu); fail: - cpufreq_cpu_put(policy); -no_policy: return ret; } EXPORT_SYMBOL_GPL(cpufreq_driver_target); int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu) { - int ret = 0; - if (cpufreq_disabled()) - return ret; + return 0; if (!cpufreq_driver->getavg) return 0; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - return -EINVAL; - - ret = cpufreq_driver->getavg(policy, cpu); - - cpufreq_cpu_put(policy); - return ret; + return cpufreq_driver->getavg(policy, cpu); } EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg); -- cgit v0.10.2 From bd2a337a25dd22bcd6b3fb1f99461f6991773e68 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 4 Jun 2013 07:17:39 +0000 Subject: ARM: zynq: Add cpuidle support Add cpuidle support for Xilinx Zynq. Signed-off-by: Michal Simek Acked-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/MAINTAINERS b/MAINTAINERS index f35a259..796aa0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1309,6 +1309,7 @@ W: http://wiki.xilinx.com T: git git://git.xilinx.com/linux-xlnx.git S: Supported F: arch/arm/mach-zynq/ +F: drivers/cpuidle/cpuidle-zynq.c ARM64 PORT (AARCH64 ARCHITECTURE) M: Catalin Marinas diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index e997f15..a7d2e83 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -37,4 +37,11 @@ config CPU_IDLE_CALXEDA depends on ARCH_HIGHBANK help Select this to enable cpuidle on Calxeda processors. + +config CPU_IDLE_ZYNQ + bool "CPU Idle Driver for Xilinx Zynq processors" + depends on ARCH_ZYNQ + help + Select this to enable cpuidle on Xilinx Zynq processors. + endif diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 0d8bd55..8767a7b 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o +obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o diff --git a/drivers/cpuidle/cpuidle-zynq.c b/drivers/cpuidle/cpuidle-zynq.c new file mode 100644 index 0000000..38e03a1 --- /dev/null +++ b/drivers/cpuidle/cpuidle-zynq.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012-2013 Xilinx + * + * CPU idle support for Xilinx Zynq + * + * based on arch/arm/mach-at91/cpuidle.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + * + * The cpu idle uses wait-for-interrupt and RAM self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and RAM self refresh + * + * Maintainer: Michal Simek + */ + +#include +#include +#include +#include +#include +#include + +#define ZYNQ_MAX_STATES 2 + +/* Actual code that puts the SoC in different idle states */ +static int zynq_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + /* Devices must be stopped here */ + cpu_pm_enter(); + + /* Add code for DDR self refresh start */ + cpu_do_idle(); + + /* Add code for DDR self refresh stop */ + cpu_pm_exit(); + + return index; +} + +static struct cpuidle_driver zynq_idle_driver = { + .name = "zynq_idle", + .owner = THIS_MODULE, + .states = { + ARM_CPUIDLE_WFI_STATE, + { + .enter = zynq_enter_idle, + .exit_latency = 10, + .target_residency = 10000, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, + .name = "RAM_SR", + .desc = "WFI and RAM Self Refresh", + }, + }, + .safe_state_index = 0, + .state_count = ZYNQ_MAX_STATES, +}; + +/* Initialize CPU idle by registering the idle states */ +static int __init zynq_cpuidle_init(void) +{ + if (!of_machine_is_compatible("xlnx,zynq-7000")) + return -ENODEV; + + pr_info("Xilinx Zynq CpuIdle Driver started\n"); + + return cpuidle_register(&zynq_idle_driver, NULL); +} + +device_initcall(zynq_cpuidle_init); -- cgit v0.10.2 From defa4c738aa90e29e91eff43b0c1b3198367ce9c Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Wed, 5 Jun 2013 09:30:48 +0000 Subject: cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCs Add cpufreq driver for Freescale e500mc, e5500 and e6500 SoCs which are capable of changing the CPU frequency dynamically Signed-off-by: Tang Yuantian Signed-off-by: Li Yang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 9c926ca..88f629e 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -23,3 +23,13 @@ config CPU_FREQ_MAPLE help This adds support for frequency switching on Maple 970FX Evaluation Board and compatible boards (IBM JS2x blades). + +config PPC_CORENET_CPUFREQ + tristate "CPU frequency scaling driver for Freescale E500MC SoCs" + depends on PPC_E500MC && OF && COMMON_CLK + select CPU_FREQ_TABLE + select CLK_PPC_CORENET + help + This adds the CPUFreq driver support for Freescale e500mc, + e5500 and e6500 series SoCs which are capable of changing + the CPU's frequency dynamically. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 315b923..c956094 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o ################################################################################## # Other platform drivers diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c new file mode 100644 index 0000000..3cae452 --- /dev/null +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -0,0 +1,380 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * CPU Frequency Scaling driver for Freescale PowerPC corenet SoCs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * struct cpu_data - per CPU data struct + * @clk: the clk of CPU + * @parent: the parent node of cpu clock + * @table: frequency table + */ +struct cpu_data { + struct clk *clk; + struct device_node *parent; + struct cpufreq_frequency_table *table; +}; + +/** + * struct soc_data - SoC specific data + * @freq_mask: mask the disallowed frequencies + * @flag: unique flags + */ +struct soc_data { + u32 freq_mask[4]; + u32 flag; +}; + +#define FREQ_MASK 1 +/* see hardware specification for the allowed frqeuencies */ +static const struct soc_data sdata[] = { + { /* used by p2041 and p3041 */ + .freq_mask = {0x8, 0x8, 0x2, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p5020 */ + .freq_mask = {0x8, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p4080, p5040 */ + .freq_mask = {0}, + .flag = 0, + }, +}; + +/* + * the minimum allowed core frequency, in Hz + * for chassis v1.0, >= platform frequency + * for chassis v2.0, >= platform frequency / 2 + */ +static u32 min_cpufreq; +static const u32 *fmask; + +/* serialize frequency changes */ +static DEFINE_MUTEX(cpufreq_lock); +static DEFINE_PER_CPU(struct cpu_data *, cpu_data); + +/* cpumask in a cluster */ +static DEFINE_PER_CPU(cpumask_var_t, cpu_mask); + +#ifndef CONFIG_SMP +static inline const struct cpumask *cpu_core_mask(int cpu) +{ + return cpumask_of(0); +} +#endif + +static unsigned int corenet_cpufreq_get_speed(unsigned int cpu) +{ + struct cpu_data *data = per_cpu(cpu_data, cpu); + + return clk_get_rate(data->clk) / 1000; +} + +/* reduce the duplicated frequencies in frequency table */ +static void freq_table_redup(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j; + + for (i = 1; i < count; i++) { + for (j = 0; j < i; j++) { + if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID || + freq_table[j].frequency != + freq_table[i].frequency) + continue; + + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + break; + } + } +} + +/* sort the frequencies in frequency table in descenting order */ +static void freq_table_sort(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j, ind; + unsigned int freq, max_freq; + struct cpufreq_frequency_table table; + for (i = 0; i < count - 1; i++) { + max_freq = freq_table[i].frequency; + ind = i; + for (j = i + 1; j < count; j++) { + freq = freq_table[j].frequency; + if (freq == CPUFREQ_ENTRY_INVALID || + freq <= max_freq) + continue; + ind = j; + max_freq = freq; + } + + if (ind != i) { + /* exchange the frequencies */ + table.driver_data = freq_table[i].driver_data; + table.frequency = freq_table[i].frequency; + freq_table[i].driver_data = freq_table[ind].driver_data; + freq_table[i].frequency = freq_table[ind].frequency; + freq_table[ind].driver_data = table.driver_data; + freq_table[ind].frequency = table.frequency; + } + } +} + +static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct device_node *np; + int i, count, ret; + u32 freq, mask; + struct clk *clk; + struct cpufreq_frequency_table *table; + struct cpu_data *data; + unsigned int cpu = policy->cpu; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + pr_err("%s: no memory\n", __func__); + goto err_np; + } + + data->clk = of_clk_get(np, 0); + if (IS_ERR(data->clk)) { + pr_err("%s: no clock information\n", __func__); + goto err_nomem2; + } + + data->parent = of_parse_phandle(np, "clocks", 0); + if (!data->parent) { + pr_err("%s: could not get clock information\n", __func__); + goto err_nomem2; + } + + count = of_property_count_strings(data->parent, "clock-names"); + table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL); + if (!table) { + pr_err("%s: no memory\n", __func__); + goto err_node; + } + + if (fmask) + mask = fmask[get_hard_smp_processor_id(cpu)]; + else + mask = 0x0; + + for (i = 0; i < count; i++) { + clk = of_clk_get(data->parent, i); + freq = clk_get_rate(clk); + /* + * the clock is valid if its frequency is not masked + * and large than minimum allowed frequency. + */ + if (freq < min_cpufreq || (mask & (1 << i))) + table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + table[i].frequency = freq / 1000; + table[i].driver_data = i; + } + freq_table_redup(table, count); + freq_table_sort(table, count); + table[i].frequency = CPUFREQ_TABLE_END; + + /* set the min and max frequency properly */ + ret = cpufreq_frequency_table_cpuinfo(policy, table); + if (ret) { + pr_err("invalid frequency table: %d\n", ret); + goto err_nomem1; + } + + data->table = table; + per_cpu(cpu_data, cpu) = data; + + /* update ->cpus if we have cluster, no harm if not */ + cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu)); + for_each_cpu(i, per_cpu(cpu_mask, cpu)) + per_cpu(cpu_data, i) = data; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = corenet_cpufreq_get_speed(policy->cpu); + + cpufreq_frequency_table_get_attr(table, cpu); + of_node_put(np); + + return 0; + +err_nomem1: + kfree(table); +err_node: + of_node_put(data->parent); +err_nomem2: + per_cpu(cpu_data, cpu) = NULL; + kfree(data); +err_np: + of_node_put(np); + + return -ENODEV; +} + +static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + unsigned int cpu; + + cpufreq_frequency_table_put_attr(policy->cpu); + of_node_put(data->parent); + kfree(data->table); + kfree(data); + + for_each_cpu(cpu, per_cpu(cpu_mask, policy->cpu)) + per_cpu(cpu_data, cpu) = NULL; + + return 0; +} + +static int corenet_cpufreq_verify(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table = + per_cpu(cpu_data, policy->cpu)->table; + + return cpufreq_frequency_table_verify(policy, table); +} + +static int corenet_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned int new; + struct clk *parent; + int ret; + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + + cpufreq_frequency_table_target(policy, data->table, + target_freq, relation, &new); + + if (policy->cur == data->table[new].frequency) + return 0; + + freqs.old = policy->cur; + freqs.new = data->table[new].frequency; + + mutex_lock(&cpufreq_lock); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + parent = of_clk_get(data->parent, data->table[new].driver_data); + ret = clk_set_parent(data->clk, parent); + if (ret) + freqs.new = freqs.old; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&cpufreq_lock); + + return ret; +} + +static struct freq_attr *corenet_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver ppc_corenet_cpufreq_driver = { + .name = "ppc_cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = corenet_cpufreq_cpu_init, + .exit = __exit_p(corenet_cpufreq_cpu_exit), + .verify = corenet_cpufreq_verify, + .target = corenet_cpufreq_target, + .get = corenet_cpufreq_get_speed, + .attr = corenet_cpufreq_attr, +}; + +static const struct of_device_id node_matches[] __initdata = { + { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], }, + { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, + {} +}; + +static int __init ppc_corenet_cpufreq_init(void) +{ + int ret; + struct device_node *np; + const struct of_device_id *match; + const struct soc_data *data; + unsigned int cpu; + + np = of_find_matching_node(NULL, node_matches); + if (!np) + return -ENODEV; + + for_each_possible_cpu(cpu) { + if (!alloc_cpumask_var(&per_cpu(cpu_mask, cpu), GFP_KERNEL)) + goto err_mask; + cpumask_copy(per_cpu(cpu_mask, cpu), cpu_core_mask(cpu)); + } + + match = of_match_node(node_matches, np); + data = match->data; + if (data) { + if (data->flag) + fmask = data->freq_mask; + min_cpufreq = fsl_get_sys_freq(); + } else { + min_cpufreq = fsl_get_sys_freq() / 2; + } + + of_node_put(np); + + ret = cpufreq_register_driver(&ppc_corenet_cpufreq_driver); + if (!ret) + pr_info("Freescale PowerPC corenet CPU frequency scaling driver\n"); + + return ret; + +err_mask: + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + return -ENOMEM; +} +module_init(ppc_corenet_cpufreq_init); + +static void __exit ppc_corenet_cpufreq_exit(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + cpufreq_unregister_driver(&ppc_corenet_cpufreq_driver); +} +module_exit(ppc_corenet_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tang Yuantian "); +MODULE_DESCRIPTION("cpufreq driver for Freescale e500mc series SoCs"); -- cgit v0.10.2 From 4b416745b9aa20a2b51509348d886ea8a5c99951 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 1 Jun 2013 00:22:44 +0200 Subject: cpufreq: SPEAr needs cpufreq table Like a lot of the other cpufreq drivers, this one needs to select CONFIG_CPU_FREQ_TABLE to avoid a build error like drivers/built-in.o: In function `spear_cpufreq_exit': spear-cpufreq.c:198: undefined reference to `cpufreq_frequency_table_put_attr' drivers/built-in.o: In function `spear_cpufreq_verify': spear-cpufreq.c:35: undefined reference to `cpufreq_frequency_table_verify' drivers/built-in.o: In function `spear_cpufreq_init': spear-cpufreq.c:181: undefined reference to `cpufreq_frequency_table_cpuinfo' spear-cpufreq.c:187: undefined reference to `cpufreq_frequency_table_get_attr' drivers/built-in.o: In function `spear_cpufreq_target': spear-cpufreq.c:120: undefined reference to `cpufreq_frequency_table_target' drivers/built-in.o:(.data+0x5e63c): undefined reference to `cpufreq_freq_attr_scaling_available_freqs' Signed-off-by: Arnd Bergmann Cc: Rafael J. Wysocki Cc: Viresh Kumar Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 6e57543..d06fe1a 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -147,6 +147,7 @@ config ARM_SA1110_CPUFREQ config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver support for SPEAr SOCs. -- cgit v0.10.2 From fe948f541abc1e176da4daf4dd181751f764ec75 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 3 Jun 2013 23:41:14 +0200 Subject: cpufreq: big.LITTLE needs cpufreq table Like a lot of the other cpufreq drivers, this one needs to select CONFIG_CPU_FREQ_TABLE to avoid a build error like built-in.o: In function `bL_cpufreq_set_target': cpufreq/arm_big_little.c:71: undefined reference to `cpufreq_frequency_table_target' built-in.o: In function `bL_cpufreq_verify_policy': cpufreq/arm_big_little.c:55: undefined reference to `cpufreq_frequency_table_verify' built-in.o: In function `bL_cpufreq_init': cpufreq/arm_big_little.c:170: undefined reference to `cpufreq_frequency_table_cpuinfo' cpufreq/arm_big_little.c:178: undefined reference to `cpufreq_frequency_table_get_attr' built-in.o:(.data+0x5a80c): undefined reference to `cpufreq_freq_attr_scaling_available_freqs' Signed-off-by: Arnd Bergmann Cc: Rafael J. Wysocki Cc: Viresh Kumar Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index d06fe1a..1ed171d 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,6 +5,7 @@ config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK + select CPU_FREQ_TABLE help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. -- cgit v0.10.2 From ea61623fe9badd5a195b3a0878e6d89a2f97ac0e Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 4 Jun 2013 14:03:18 -0300 Subject: cpufreq: kirkwood: Select CPU_FREQ_TABLE option We need to select CPU_FREQ_TABLE in order to build without this kind of errors: drivers/built-in.o: In function `kirkwood_cpufreq_cpu_exit': /home/zeta/linux-devel/marvell-legacy/drivers/cpufreq/kirkwood-cpufreq.c:145: undefined reference to `cpufreq_frequency_table_put_attr' Signed-off-by: Ezequiel Garcia Acked-by: Jason Cooper Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 1ed171d..5c7c2e1 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -87,6 +87,7 @@ config ARM_INTEGRATOR config ARM_KIRKWOOD_CPUFREQ def_bool ARCH_KIRKWOOD && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Marvell Kirkwood SoCs. -- cgit v0.10.2 From c655affbd524d0105978ecd696c3bb8a281b418b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jun 2013 13:13:31 +0200 Subject: ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq After commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) the acpi-cpufreq module is not loaded automatically by udev which fails to match it against the x86cpu modalias. Still, it can be matched against ACPI processor device IDs, which even makes more sense, because it depends on the ACPI processor driver that uses those device IDs to bind to processor devices. For this reason, add ACPI processor device IDs to acpi-cpufreq. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 11b8b4b..4a9ca01 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -1034,4 +1034,11 @@ static const struct x86_cpu_id acpi_cpufreq_ids[] = { }; MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); +static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + MODULE_ALIAS("acpi"); -- cgit v0.10.2 From 7fb6a53db58c729ff470095371f431b6d66c527b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Apr 2013 18:24:25 +0530 Subject: cpufreq: powerpc: move cpufreq driver to drivers/cpufreq Move cpufreq driver of powerpc platform to drivers/cpufreq. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index b62aab3..e17cdfc 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -193,37 +193,6 @@ config PPC_IO_WORKAROUNDS source "drivers/cpufreq/Kconfig" -menu "CPU Frequency drivers" - depends on CPU_FREQ - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on PPC_PMAC && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC_PASEMI_CPUFREQ - bool "Support for PA Semi PWRficient" - depends on PPC_PASEMI - default y - select CPU_FREQ_TABLE - help - This adds the support for frequency switching on PA Semi - PWRficient processors. - -endmenu - menu "CPUIdle driver" source "drivers/cpuidle/Kconfig" diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index ce6d789..8e8d4ca 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,3 +1,2 @@ obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o -obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c deleted file mode 100644 index b704da4..0000000 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright (C) 2007 PA Semi, Inc - * - * Authors: Egor Martovetsky - * Olof Johansson - * - * Maintained by: Olof Johansson - * - * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include - -#include -#include -#include -#include -#include - -#define SDCASR_REG 0x0100 -#define SDCASR_REG_STRIDE 0x1000 -#define SDCPWR_CFGA0_REG 0x0100 -#define SDCPWR_PWST0_REG 0x0000 -#define SDCPWR_GIZTIME_REG 0x0440 - -/* SDCPWR_GIZTIME_REG fields */ -#define SDCPWR_GIZTIME_GR 0x80000000 -#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff - -/* Offset of ASR registers from SDC base */ -#define SDCASR_OFFSET 0x120000 - -static void __iomem *sdcpwr_mapbase; -static void __iomem *sdcasr_mapbase; - -static DEFINE_MUTEX(pas_switch_mutex); - -/* Current astate, is used when waking up from power savings on - * one core, in case the other core has switched states during - * the idle time. - */ -static int current_astate; - -/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ -static struct cpufreq_frequency_table pas_freqs[] = { - {0, 0}, - {1, 0}, - {2, 0}, - {3, 0}, - {4, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr *pas_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* - * hardware specific functions - */ - -static int get_astate_freq(int astate) -{ - u32 ret; - ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); - - return ret & 0x3f; -} - -static int get_cur_astate(int cpu) -{ - u32 ret; - - ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); - ret = (ret >> (cpu * 4)) & 0x7; - - return ret; -} - -static int get_gizmo_latency(void) -{ - u32 giztime, ret; - - giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); - - /* just provide the upper bound */ - if (giztime & SDCPWR_GIZTIME_GR) - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; - else - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; - - return ret; -} - -static void set_astate(int cpu, unsigned int astate) -{ - unsigned long flags; - - /* Return if called before init has run */ - if (unlikely(!sdcasr_mapbase)) - return; - - local_irq_save(flags); - - out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); - - local_irq_restore(flags); -} - -int check_astate(void) -{ - return get_cur_astate(hard_smp_processor_id()); -} - -void restore_astate(int cpu) -{ - set_astate(cpu, current_astate); -} - -/* - * cpufreq functions - */ - -static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - const u32 *max_freqp; - u32 max_freq; - int i, cur_astate; - struct resource res; - struct device_node *cpu, *dn; - int err = -ENODEV; - - cpu = of_get_cpu_node(policy->cpu, NULL); - - if (!cpu) - goto out; - - dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-sdc"); - if (!dn) - goto out; - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out; - sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); - if (!sdcasr_mapbase) { - err = -EINVAL; - goto out; - } - - dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-gizmo"); - if (!dn) { - err = -ENODEV; - goto out_unmap_sdcasr; - } - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out_unmap_sdcasr; - sdcpwr_mapbase = ioremap(res.start, 0x1000); - if (!sdcpwr_mapbase) { - err = -EINVAL; - goto out_unmap_sdcasr; - } - - pr_debug("init cpufreq on CPU %d\n", policy->cpu); - - max_freqp = of_get_property(cpu, "clock-frequency", NULL); - if (!max_freqp) { - err = -EINVAL; - goto out_unmap_sdcpwr; - } - - /* we need the freq in kHz */ - max_freq = *max_freqp / 1000; - - pr_debug("max clock-frequency is at %u kHz\n", max_freq); - pr_debug("initializing frequency table\n"); - - /* initialize frequency table */ - for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - pas_freqs[i].frequency = - get_astate_freq(pas_freqs[i].driver_data) * 100000; - pr_debug("%d: %d\n", i, pas_freqs[i].frequency); - } - - policy->cpuinfo.transition_latency = get_gizmo_latency(); - - cur_astate = get_cur_astate(policy->cpu); - pr_debug("current astate is at %d\n",cur_astate); - - policy->cur = pas_freqs[cur_astate].frequency; - cpumask_copy(policy->cpus, cpu_online_mask); - - ppc_proc_freq = policy->cur * 1000ul; - - cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max - * are set correctly - */ - return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); - -out_unmap_sdcpwr: - iounmap(sdcpwr_mapbase); - -out_unmap_sdcasr: - iounmap(sdcasr_mapbase); -out: - return err; -} - -static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - /* - * We don't support CPU hotplug. Don't unmap after the system - * has already made it to a running state. - */ - if (system_state != SYSTEM_BOOTING) - return 0; - - if (sdcasr_mapbase) - iounmap(sdcasr_mapbase); - if (sdcpwr_mapbase) - iounmap(sdcpwr_mapbase); - - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int pas_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pas_freqs); -} - -static int pas_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - int pas_astate_new; - int i; - - cpufreq_frequency_table_target(policy, - pas_freqs, - target_freq, - relation, - &pas_astate_new); - - freqs.old = policy->cur; - freqs.new = pas_freqs[pas_astate_new].frequency; - - mutex_lock(&pas_switch_mutex); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - - pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", - policy->cpu, - pas_freqs[pas_astate_new].frequency, - pas_freqs[pas_astate_new].driver_data); - - current_astate = pas_astate_new; - - for_each_online_cpu(i) - set_astate(i, pas_astate_new); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - mutex_unlock(&pas_switch_mutex); - - ppc_proc_freq = freqs.new * 1000ul; - return 0; -} - -static struct cpufreq_driver pas_cpufreq_driver = { - .name = "pas-cpufreq", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = pas_cpufreq_cpu_init, - .exit = pas_cpufreq_cpu_exit, - .verify = pas_cpufreq_verify, - .target = pas_cpufreq_target, - .attr = pas_cpu_freqs_attr, -}; - -/* - * module init and destoy - */ - -static int __init pas_cpufreq_init(void) -{ - if (!of_machine_is_compatible("PA6T-1682M") && - !of_machine_is_compatible("pasemi,pwrficient")) - return -ENODEV; - - return cpufreq_register_driver(&pas_cpufreq_driver); -} - -static void __exit pas_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pas_cpufreq_driver); -} - -module_init(pas_cpufreq_init); -module_exit(pas_cpufreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Egor Martovetsky , Olof Johansson "); diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index ea47df6..52c6ce1 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -9,8 +9,6 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o -obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c deleted file mode 100644 index 3104fad..0000000 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt - * Copyright (C) 2004 John Steele Scott - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; -static unsigned long transition_latency; - -/* - * Different models uses different mechanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = mpic_cpu_get_priority(); - mpic_cpu_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occurring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - switch_mmu_context(NULL, current->active_mm); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* - * Restore decrementer; we'll take a decrementer interrupt - * as soon as interrupts are re-enabled and the generic - * clockevents code will reprogram it with the right value. - */ - set_dec(1); - - /* Restore interrupts */ - mpic_cpu_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, - int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - int rc; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(policy, newstate, 1); - - ppc_proc_freq = cur_freq * 1000ul; - return rc; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - const u32 *reg = of_get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(policy, sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - ppc_proc_freq = cur_freq * 1000ul; - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - const u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - const u32 *freqs, *ratio; - - freqs = of_get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", - NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = of_get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = of_get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr; - const u32 *value; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = of_get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - const u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = of_get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - transition_latency = CPUFREQ_ETERNAL; - - /* Check for 7447A based MacRISC3 */ - if (of_machine_is_compatible("MacRISC3") && - of_get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - transition_latency = 8000000; - /* Check for other MacRISC3 machines */ - } else if (of_machine_is_compatible("PowerBook3,4") || - of_machine_is_compatible("PowerBook3,5") || - of_machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (of_machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (of_machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - of_node_put(cpunode); - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - ppc_proc_freq = cur_freq * 1000ul; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c deleted file mode 100644 index 7ba4234..0000000 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt - * and Markus Demleitner - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table g5_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* g5_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int g5_pmode_cur; - -static void (*g5_switch_volt)(int speed_mode); -static int (*g5_switch_freq)(int speed_mode); -static int (*g5_query_freq)(void); - -static DEFINE_MUTEX(g5_switch_mutex); - -static unsigned long transition_latency; - -#ifdef CONFIG_PMAC_SMU - -static const u32 *g5_pmode_data; -static int g5_pmode_max; - -static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ -static int g5_fvt_count; /* number of op. points */ -static int g5_fvt_cur; /* current op. point */ - -/* - * SMU based voltage switching for Neo2 platforms - */ - -static void g5_smu_switch_volt(int speed_mode) -{ - struct smu_simple_cmd cmd; - - DECLARE_COMPLETION_ONSTACK(comp); - smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, - &comp, 'V', 'S', 'L', 'E', 'W', - 0xff, g5_fvt_cur+1, speed_mode); - wait_for_completion(&comp); -} - -/* - * Platform function based voltage/vdnap switching for Neo2 - */ - -static struct pmf_function *pfunc_set_vdnap0; -static struct pmf_function *pfunc_vdnap0_complete; - -static void g5_vdnap_switch_volt(int speed_mode) -{ - struct pmf_args args; - u32 slew, done = 0; - unsigned long timeout; - - slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; - args.count = 1; - args.u[0].p = &slew; - - pmf_call_one(pfunc_set_vdnap0, &args); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_vdnap0_complete, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); -} - - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int g5_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - g5_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= g5_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} - -#endif /* CONFIG_PMAC_SMU */ - -/* - * Platform function based voltage switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu0_volt_high; -static struct pmf_function *pfunc_cpu0_volt_low; -static struct pmf_function *pfunc_cpu1_volt_high; -static struct pmf_function *pfunc_cpu1_volt_low; - -static void g5_pfunc_switch_volt(int speed_mode) -{ - if (speed_mode == CPUFREQ_HIGH) { - if (pfunc_cpu0_volt_high) - pmf_call_one(pfunc_cpu0_volt_high, NULL); - if (pfunc_cpu1_volt_high) - pmf_call_one(pfunc_cpu1_volt_high, NULL); - } else { - if (pfunc_cpu0_volt_low) - pmf_call_one(pfunc_cpu0_volt_low, NULL); - if (pfunc_cpu1_volt_low) - pmf_call_one(pfunc_cpu1_volt_low, NULL); - } - msleep(10); /* should be faster , to fix */ -} - -/* - * Platform function based frequency switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu_setfreq_high; -static struct pmf_function *pfunc_cpu_setfreq_low; -static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done; - -static int g5_pfunc_switch_freq(int speed_mode) -{ - struct pmf_args args; - u32 done = 0; - unsigned long timeout; - int rc; - - DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - /* Do it */ - if (speed_mode == CPUFREQ_HIGH) - rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); - else - rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); - - if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_slewing_done, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_pfunc_query_freq(void) -{ - struct pmf_args args; - u32 val = 0; - - args.count = 1; - args.u[0].p = &val; - pmf_call_one(pfunc_cpu_getfreq, &args); - return val ? CPUFREQ_HIGH : CPUFREQ_LOW; -} - - -/* - * Common interface to the cpufreq core - */ - -static int g5_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); -} - -static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - int rc; - - if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - - mutex_lock(&g5_switch_mutex); - - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - - mutex_unlock(&g5_switch_mutex); - - return rc; -} - -static unsigned int g5_cpufreq_get_speed(unsigned int cpu) -{ - return g5_cpu_freqs[g5_pmode_cur].frequency; -} - -static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - cpumask_copy(policy->cpus, cpu_online_mask); - cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - g5_cpu_freqs); -} - - -static struct cpufreq_driver g5_cpufreq_driver = { - .name = "powermac", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = g5_cpufreq_cpu_init, - .verify = g5_cpufreq_verify, - .target = g5_cpufreq_target, - .get = g5_cpufreq_get_speed, - .attr = g5_cpu_freqs_attr, -}; - - -#ifdef CONFIG_PMAC_SMU - -static int __init g5_neo2_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpunode; - unsigned int psize, ssize; - unsigned long max_freq; - char *freq_method, *volt_method; - const u32 *valp; - u32 pvr_hi; - int use_volts_vdnap = 0; - int use_volts_smu = 0; - int rc = -ENODEV; - - /* Check supported platforms */ - if (of_machine_is_compatible("PowerMac8,1") || - of_machine_is_compatible("PowerMac8,2") || - of_machine_is_compatible("PowerMac9,1")) - use_volts_smu = 1; - else if (of_machine_is_compatible("PowerMac11,2")) - use_volts_vdnap = 1; - else - return -ENODEV; - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - const u32 *reg = of_get_property(cpunode, "reg", NULL); - if (reg == NULL || (*reg) != 0) - continue; - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); - return -ENODEV; - } - - /* Check 970FX for now */ - valp = of_get_property(cpunode, "cpu-version", NULL); - if (!valp) { - DBG("No cpu-version property !\n"); - goto bail_noprops; - } - pvr_hi = (*valp) >> 16; - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); - if (!g5_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - g5_pmode_max = psize / sizeof(u32) - 1; - - if (use_volts_smu) { - const struct smu_sdbp_header *shdr; - - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; - - g5_switch_volt = g5_smu_switch_volt; - volt_method = "SMU"; - } else if (use_volts_vdnap) { - struct device_node *root; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); - goto bail_noprops; - } - pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); - pfunc_vdnap0_complete = - pmf_find_function(root, "slewing-done"); - if (pfunc_set_vdnap0 == NULL || - pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); - goto bail_noprops; - } - - g5_switch_volt = g5_vdnap_switch_volt; - volt_method = "GPIO"; - } else { - g5_switch_volt = g5_dummy_switch_volt; - volt_method = "none"; - } - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - return -ENODEV; - max_freq = (*valp)/1000; - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = max_freq/2; - - /* Set callbacks */ - transition_latency = 12000; - g5_switch_freq = g5_scom_switch_freq; - g5_query_freq = g5_scom_query_freq; - freq_method = "SCOM"; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - - /* We keep the CPU node on hold... hopefully, Apple G5 don't have - * hotplug CPU with a dynamic device-tree ... - */ - return rc; - - bail_noprops: - of_node_put(cpunode); - - return rc; -} - -#endif /* CONFIG_PMAC_SMU */ - - -static int __init g5_pm72_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; - const u8 *eeprom = NULL; - const u32 *valp; - u64 max_freq, min_freq, ih, il; - int has_volt = 1, rc = 0; - - DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" - " RackMac3,1...\n"); - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); - return -ENODEV; - } - - /* Lookup the cpuid eeprom node */ - cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); - if (cpuid != NULL) - eeprom = of_get_property(cpuid, "cpuid", NULL); - if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); - rc = -ENODEV; - goto bail; - } - - /* Lookup the i2c hwclock */ - for (hwclock = NULL; - (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ - const char *loc = of_get_property(hwclock, - "hwctrl-location", NULL); - if (loc == NULL) - continue; - if (strcmp(loc, "CPU CLOCK")) - continue; - if (!of_get_property(hwclock, "platform-get-frequency", NULL)) - continue; - break; - } - if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); - rc = -ENODEV; - goto bail; - } - - DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); - - /* Now get all the platform functions */ - pfunc_cpu_getfreq = - pmf_find_function(hwclock, "get-frequency"); - pfunc_cpu_setfreq_high = - pmf_find_function(hwclock, "set-frequency-high"); - pfunc_cpu_setfreq_low = - pmf_find_function(hwclock, "set-frequency-low"); - pfunc_slewing_done = - pmf_find_function(hwclock, "slewing-done"); - pfunc_cpu0_volt_high = - pmf_find_function(hwclock, "set-voltage-high-0"); - pfunc_cpu0_volt_low = - pmf_find_function(hwclock, "set-voltage-low-0"); - pfunc_cpu1_volt_high = - pmf_find_function(hwclock, "set-voltage-high-1"); - pfunc_cpu1_volt_low = - pmf_find_function(hwclock, "set-voltage-low-1"); - - /* Check we have minimum requirements */ - if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || - pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); - rc = -ENODEV; - goto bail; - } - - /* Check that we have complete sets */ - if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; - has_volt = 0; - } - if (!has_volt || - pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; - } - - /* Note: The device tree also contains a "platform-set-values" - * function for which I haven't quite figured out the usage. It - * might have to be called on init and/or wakeup, I'm not too sure - * but things seem to work fine without it so far ... - */ - - /* Get max frequency from device-tree */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); - rc = -ENODEV; - goto bail; - } - - max_freq = (*valp)/1000; - - /* Now calculate reduced frequency by using the cpuid input freq - * ratio. This requires 64 bits math unless we are willing to lose - * some precision - */ - ih = *((u32 *)(eeprom + 0x10)); - il = *((u32 *)(eeprom + 0x20)); - - /* Check for machines with no useful settings */ - if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); - rc = -ENODEV; - goto bail; - } - - min_freq = 0; - if (ih != 0 && il != 0) - min_freq = (max_freq * il) / ih; - - /* Sanity check */ - if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENXIO; - goto bail; - } - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = min_freq; - - /* Set callbacks */ - transition_latency = CPUFREQ_ETERNAL; - g5_switch_volt = g5_pfunc_switch_volt; - g5_switch_freq = g5_pfunc_switch_freq; - g5_query_freq = g5_pfunc_query_freq; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - bail: - if (rc != 0) { - pmf_put_function(pfunc_cpu_getfreq); - pmf_put_function(pfunc_cpu_setfreq_high); - pmf_put_function(pfunc_cpu_setfreq_low); - pmf_put_function(pfunc_slewing_done); - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - } - of_node_put(hwclock); - of_node_put(cpuid); - of_node_put(cpunode); - - return rc; -} - -static int __init g5_cpufreq_init(void) -{ - struct device_node *cpus; - int rc = 0; - - cpus = of_find_node_by_path("/cpus"); - if (cpus == NULL) { - DBG("No /cpus node !\n"); - return -ENODEV; - } - - if (of_machine_is_compatible("PowerMac7,2") || - of_machine_is_compatible("PowerMac7,3") || - of_machine_is_compatible("RackMac3,1")) - rc = g5_pm72_cpufreq_init(cpus); -#ifdef CONFIG_PMAC_SMU - else - rc = g5_neo2_cpufreq_init(cpus); -#endif /* CONFIG_PMAC_SMU */ - - of_node_put(cpus); - return rc; -} - -module_init(g5_cpufreq_init); - - -MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 88f629e..c48f83c 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -33,3 +33,29 @@ config PPC_CORENET_CPUFREQ This adds the CPUFreq driver support for Freescale e500mc, e5500 and e6500 series SoCs which are capable of changing the CPU's frequency dynamically. + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + select CPU_FREQ_TABLE + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index c956094..2de2af2 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -80,6 +80,9 @@ ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o ################################################################################## # Other platform drivers diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 0000000..b704da4 --- /dev/null +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,331 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky + * Olof Johansson + * + * Maintained by: Olof Johansson + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +static DEFINE_MUTEX(pas_switch_mutex); + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0}, + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr *pas_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + const u32 *max_freqp; + u32 max_freq; + int i, cur_astate; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + goto out; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + if (!max_freqp) { + err = -EINVAL; + goto out_unmap_sdcpwr; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + pas_freqs[i].frequency = + get_astate_freq(pas_freqs[i].driver_data) * 100000; + pr_debug("%d: %d\n", i, pas_freqs[i].frequency); + } + + policy->cpuinfo.transition_latency = get_gizmo_latency(); + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + cpumask_copy(policy->cpus, cpu_online_mask); + + ppc_proc_freq = policy->cur * 1000ul; + + cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max + * are set correctly + */ + return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); + +out_unmap_sdcpwr: + iounmap(sdcpwr_mapbase); + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int pas_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pas_freqs); +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + int pas_astate_new; + int i; + + cpufreq_frequency_table_target(policy, + pas_freqs, + target_freq, + relation, + &pas_astate_new); + + freqs.old = policy->cur; + freqs.new = pas_freqs[pas_astate_new].frequency; + + mutex_lock(&pas_switch_mutex); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&pas_switch_mutex); + + ppc_proc_freq = freqs.new * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = pas_cpufreq_verify, + .target = pas_cpufreq_target, + .attr = pas_cpu_freqs_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky , Olof Johansson "); diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c new file mode 100644 index 0000000..3104fad --- /dev/null +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -0,0 +1,721 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt + * Copyright (C) 2004 John Steele Scott + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; +static unsigned long transition_latency; + +/* + * Different models uses different mechanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occurring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + switch_mmu_context(NULL, current->active_mm); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, + int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + int rc; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + rc = do_set_cpu_speed(policy, newstate, 1); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + const u32 *reg = of_get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(policy, sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + const u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + const u32 *freqs, *ratio; + + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = of_get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = of_get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr; + const u32 *value; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + const u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = of_get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + transition_latency = CPUFREQ_ETERNAL; + + /* Check for 7447A based MacRISC3 */ + if (of_machine_is_compatible("MacRISC3") && + of_get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + transition_latency = 8000000; + /* Check for other MacRISC3 machines */ + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (of_machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (of_machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + of_node_put(cpunode); + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c new file mode 100644 index 0000000..7ba4234 --- /dev/null +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -0,0 +1,746 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt + * and Markus Demleitner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int g5_pmode_cur; + +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + +static DEFINE_MUTEX(g5_switch_mutex); + +static unsigned long transition_latency; + +#ifdef CONFIG_PMAC_SMU + +static const u32 *g5_pmode_data; +static int g5_pmode_max; + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* + * SMU based voltage switching for Neo2 platforms + */ + +static void g5_smu_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION_ONSTACK(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) +{ + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; + + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; + + pmf_call_one(pfunc_set_vdnap0, &args); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} + + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + msleep(10); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + + +/* + * Common interface to the cpufreq core + */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + int rc; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + if (g5_pmode_cur == newstate) + return 0; + + mutex_lock(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[newstate].frequency; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + rc = g5_switch_freq(newstate); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + mutex_unlock(&g5_switch_mutex); + + return rc; +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + /* secondary CPUs are tied to the primary one by the + * cpufreq core if in the secondary policy we tell it that + * it actually must be one policy together with all others. */ + cpumask_copy(policy->cpus, cpu_online_mask); + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +#ifdef CONFIG_PMAC_SMU + +static int __init g5_neo2_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + unsigned long max_freq; + char *freq_method, *volt_method; + const u32 *valp; + u32 pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; + int rc = -ENODEV; + + /* Check supported platforms */ + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1")) + use_volts_smu = 1; + else if (of_machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + const u32 *reg = of_get_property(cpunode, "reg", NULL); + if (reg == NULL || (*reg) != 0) + continue; + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = of_get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + if (use_volts_smu) { + const struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - + sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Set callbacks */ + transition_latency = 12000; + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +#endif /* CONFIG_PMAC_SMU */ + + +static int __init g5_pm72_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; + const u8 *eeprom = NULL; + const u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = of_get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for (hwclock = NULL; + (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + const char *loc = of_get_property(hwclock, + "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENXIO; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Set callbacks */ + transition_latency = CPUFREQ_ETERNAL; + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpus; + int rc = 0; + + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) { + DBG("No /cpus node !\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + rc = g5_pm72_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU + else + rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ + + of_node_put(cpus); + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From efe4e06de34953888504f4ea1d36c86db2267ea9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 30 May 2013 13:08:34 +0300 Subject: PM / AVS: SmartReflex: disable errgen before vpbound disable vpboundsintr_en is available inside the IP block as an re-sycned version and one which is not. Due to this, there is an 1 sysclk cycle window where the SR_SInterruptz signal could be asserted low. IF, intr_en is cleared on the exact same cycle as the irqclr, an additional pulse is generated which indicates for VP that an additional adjustment of voltage is required. This results in VP doing two voltage adjustments for the SRERR (based on configuration, upto 4 steps), instead of the needed 1 step. Due to the unexpected pulse from AVS which breaks the AVS-VP communication protocol, VP also ends up in a stuck condition by entering a state where VP module remains non-responsive to any futher AVS adjustment events. This creates the symptom called "TRANXDONE Timeout" scenario. By disabling errgen prior to disable of intr_en, this situation can be avoided. Signed-off-by: Vincent Bour Signed-off-by: Leonardo Affortunati Signed-off-by: Nishanth Menon Signed-off-by: Andrii.Tseglytskyi Signed-off-by: Kevin Hilman diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 6b2238b..f34d34d 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -449,12 +449,17 @@ int sr_disable_errgen(struct voltagedomain *voltdm) return -EINVAL; } - /* Disable the interrupts of ERROR module */ - sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); - /* Disable the Sensor and errorgen */ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); + /* + * Disable the interrupts of ERROR module + * NOTE: modify is a read, modify,write - an implicit OCP barrier + * which is required is present here - sequencing is critical + * at this point (after errgen is disabled, vpboundint disable) + */ + sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); + return 0; } -- cgit v0.10.2 From bd4a36bec0e63941881608ad38351778748675e0 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Thu, 30 May 2013 13:08:35 +0300 Subject: PM / AVS: SmartReflex: disable runtime PM on driver remove Runtime PM should be disabled for device on driver remove, otherwise runtime PM will be not balanced, and this will cause an error message, on next driver probe. Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index f34d34d..9b56648 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -1032,6 +1032,7 @@ static int omap_sr_remove(struct platform_device *pdev) if (sr_info->dbg_dir) debugfs_remove_recursive(sr_info->dbg_dir); + pm_runtime_disable(&pdev->dev); list_del(&sr_info->node); iounmap(sr_info->base); kfree(sr_info->name); -- cgit v0.10.2 From 33da28246f8cba3f1ffbca9434622d93afcde013 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Thu, 30 May 2013 13:08:36 +0300 Subject: PM / AVS: SmartReflex: fix driver name DRIVER_NAME was undefined for SmartReflex. Now it is defined with valid value "smartreflex". It is needed to define proper value for: MODULE_ALIAS("platform:" DRIVER_NAME); Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 9b56648..002005e 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -27,6 +27,7 @@ #include #include +#define DRIVER_NAME "smartreflex" #define SMARTREFLEX_NAME_LEN 16 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200 @@ -1070,7 +1071,7 @@ static struct platform_driver smartreflex_driver = { .remove = omap_sr_remove, .shutdown = omap_sr_shutdown, .driver = { - .name = "smartreflex", + .name = DRIVER_NAME, }, }; -- cgit v0.10.2 From 3dfc35ffd938abe67f2559db6b517536a207df24 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Mon, 27 May 2013 14:09:22 +0300 Subject: PM / AVS: SmartReflex: use omap_sr * for errgen interfaces SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_disable_errgen() and sr_configure_errgen() are interface functions between SR driver and SR class. They are typically used by Class driver to configure error generator module during SmartReflex enable/disable sequence. Now they take struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index aee3c89..6c26dc15 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -31,7 +31,7 @@ static int sr_class3_enable(struct omap_sr *sr) static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) { - sr_disable_errgen(sr->voltdm); + sr_disable_errgen(sr); omap_vp_disable(sr->voltdm); sr_disable(sr->voltdm); if (is_volt_reset) @@ -42,7 +42,7 @@ static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) static int sr_class3_configure(struct omap_sr *sr) { - return sr_configure_errgen(sr->voltdm); + return sr_configure_errgen(sr); } /* SR class3 structure */ diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 002005e..fccb627 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -342,9 +342,9 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row( /* Public Functions */ /** - * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the + * sr_configure_errgen() - Configures the SmartReflex to perform AVS using the * error generator module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * configure the error generator module inside the smartreflex module. @@ -353,17 +353,17 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row( * SR CLASS 2 can choose between ERROR module and MINMAXAVG * module. Returns 0 on success and error value in case of failure. */ -int sr_configure_errgen(struct voltagedomain *voltdm) +int sr_configure_errgen(struct omap_sr *sr) { u32 sr_config, sr_errconfig, errconfig_offs; u32 vpboundint_en, vpboundint_st; u32 senp_en = 0, senn_en = 0; u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } if (!sr->clk_length) @@ -415,22 +415,22 @@ int sr_configure_errgen(struct voltagedomain *voltdm) /** * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * disable the error generator module inside the smartreflex module. * * Returns 0 on success and error value in case of failure. */ -int sr_disable_errgen(struct voltagedomain *voltdm) +int sr_disable_errgen(struct omap_sr *sr) { u32 errconfig_offs; u32 vpboundint_en, vpboundint_st; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } switch (sr->ip_type) { diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index c0f44c2..9c3b9ad 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -301,8 +301,8 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); /* Smartreflex driver hooks to be called from Smartreflex class driver */ int sr_enable(struct voltagedomain *voltdm, unsigned long volt); void sr_disable(struct voltagedomain *voltdm); -int sr_configure_errgen(struct voltagedomain *voltdm); -int sr_disable_errgen(struct voltagedomain *voltdm); +int sr_configure_errgen(struct omap_sr *sr); +int sr_disable_errgen(struct omap_sr *sr); int sr_configure_minmax(struct voltagedomain *voltdm); /* API to register the smartreflex class driver with the smartreflex driver */ -- cgit v0.10.2 From 6c80573415fe47450579d5d8bfab53b304d803ed Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Mon, 27 May 2013 14:09:23 +0300 Subject: PM / AVS: SmartReflex: use omap_sr * for minmax interfaces SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_configure_minmax() is interface function between SR driver and SR class. It is typically used by Class driver to configure MINMAXAVG module inside SmartReflex module. Now it takes struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index fccb627..08a8a29 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -465,9 +465,9 @@ int sr_disable_errgen(struct omap_sr *sr) } /** - * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the + * sr_configure_minmax() - Configures the SmartReflex to perform AVS using the * minmaxavg module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * configure the minmaxavg module inside the smartreflex module. @@ -476,16 +476,16 @@ int sr_disable_errgen(struct omap_sr *sr) * SR CLASS 2 can choose between ERROR module and MINMAXAVG * module. Returns 0 on success and error value in case of failure. */ -int sr_configure_minmax(struct voltagedomain *voltdm) +int sr_configure_minmax(struct omap_sr *sr) { u32 sr_config, sr_avgwt; u32 senp_en = 0, senn_en = 0; u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } if (!sr->clk_length) diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 9c3b9ad..648be77 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -303,7 +303,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt); void sr_disable(struct voltagedomain *voltdm); int sr_configure_errgen(struct omap_sr *sr); int sr_disable_errgen(struct omap_sr *sr); -int sr_configure_minmax(struct voltagedomain *voltdm); +int sr_configure_minmax(struct omap_sr *sr); /* API to register the smartreflex class driver with the smartreflex driver */ int sr_register_class(struct omap_sr_class_data *class_data); -- cgit v0.10.2 From 299066bb376ef7720cc3d8de95d5b967c5446863 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Mon, 27 May 2013 14:09:24 +0300 Subject: PM / AVS: SmartReflex: use omap_sr * for enable/disable interface SmartReflex driver interface is natively divided to two parts: - external SmartReflex interface - interface between SmartReflex driver and SmartReflex Class Functions which belong to AVS class interface can use struct omap_sr* instead of struct voltatedomain*, to provide a direct connection between SR driver and SR class. This allows us to optimize and not do additional lookups where none is required. sr_enable() and sr_disable() are interface functions between SR driver and SR class. They are typically used by Class driver to enable/disable SmartReflex hardware module. Now they take struct omap_sr* as input parameter. Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 6c26dc15..7a42e19 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -26,14 +26,14 @@ static int sr_class3_enable(struct omap_sr *sr) } omap_vp_enable(sr->voltdm); - return sr_enable(sr->voltdm, volt); + return sr_enable(sr, volt); } static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset) { sr_disable_errgen(sr); omap_vp_disable(sr->voltdm); - sr_disable(sr->voltdm); + sr_disable(sr); if (is_volt_reset) voltdm_reset(sr->voltdm); diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 08a8a29..14cce7a 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -552,7 +552,7 @@ int sr_configure_minmax(struct omap_sr *sr) /** * sr_enable() - Enables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: pointer to which the SR module to be configured belongs to. * @volt: The voltage at which the Voltage domain associated with * the smartreflex module is operating at. * This is required only to program the correct Ntarget value. @@ -561,16 +561,16 @@ int sr_configure_minmax(struct omap_sr *sr) * enable a smartreflex module. Returns 0 on success. Returns error * value if the voltage passed is wrong or if ntarget value is wrong. */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt) +int sr_enable(struct omap_sr *sr, unsigned long volt) { struct omap_volt_data *volt_data; - struct omap_sr *sr = _sr_lookup(voltdm); struct omap_sr_nvalue_table *nvalue_row; int ret; - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); @@ -612,17 +612,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt) /** * sr_disable() - Disables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: pointer to which the SR module to be configured belongs to. * * This API is to be called from the smartreflex class driver to * disable a smartreflex module. */ -void sr_disable(struct voltagedomain *voltdm) +void sr_disable(struct omap_sr *sr) { - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); return; } diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 648be77..d8b187c3 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -299,8 +299,8 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); /* Smartreflex driver hooks to be called from Smartreflex class driver */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt); -void sr_disable(struct voltagedomain *voltdm); +int sr_enable(struct omap_sr *sr, unsigned long volt); +void sr_disable(struct omap_sr *sr); int sr_configure_errgen(struct omap_sr *sr); int sr_disable_errgen(struct omap_sr *sr); int sr_configure_minmax(struct omap_sr *sr); -- cgit v0.10.2 From efca406b940e93e6af38c597eecd5fb79b39b7ea Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Thu, 30 May 2013 13:43:56 +0300 Subject: PM / AVS: SmartReflex: use devm_* API to initialize SmartReflex Use of of devm_* API for resource allocation provides benefits such as auto handling of resource free. This reduces possibility have memory leaks in case of wrong error handling. All direct release calls should be removed to avoid races. Reported-by: Grygorii Strashko Signed-off-by: Andrii Tseglytskyi Signed-off-by: Kevin Hilman diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 14cce7a..db9973b 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -28,7 +28,7 @@ #include #define DRIVER_NAME "smartreflex" -#define SMARTREFLEX_NAME_LEN 16 +#define SMARTREFLEX_NAME_LEN 32 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200 @@ -208,12 +208,11 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) static int sr_late_init(struct omap_sr *sr_info) { struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data; - struct resource *mem; int ret = 0; if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { - ret = request_irq(sr_info->irq, sr_interrupt, - 0, sr_info->name, sr_info); + ret = devm_request_irq(&sr_info->pdev->dev, sr_info->irq, + sr_interrupt, 0, sr_info->name, sr_info); if (ret) goto error; disable_irq(sr_info->irq); @@ -225,14 +224,10 @@ static int sr_late_init(struct omap_sr *sr_info) return ret; error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); list_del(&sr_info->node); dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" "interrupt handler. Smartreflex will" "not function as desired\n", __func__); - kfree(sr_info); return ret; } @@ -852,34 +847,33 @@ static int __init omap_sr_probe(struct platform_device *pdev) struct dentry *nvalue_dir; int i, ret = 0; - sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); + sr_info = devm_kzalloc(&pdev->dev, sizeof(struct omap_sr), GFP_KERNEL); if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", __func__); return -ENOMEM; } + sr_info->name = devm_kzalloc(&pdev->dev, + SMARTREFLEX_NAME_LEN, GFP_KERNEL); + if (!sr_info->name) { + dev_err(&pdev->dev, "%s: unable to allocate SR instance name\n", + __func__); + return -ENOMEM; + } + platform_set_drvdata(pdev, sr_info); if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - ret = -EINVAL; - goto err_free_devinfo; + return -EINVAL; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem resource\n", __func__); - ret = -ENODEV; - goto err_free_devinfo; - } - - mem = request_mem_region(mem->start, resource_size(mem), - dev_name(&pdev->dev)); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem region\n", __func__); - ret = -EBUSY; - goto err_free_devinfo; + sr_info->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(sr_info->base)) { + dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); + return PTR_ERR(sr_info->base); } irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -887,13 +881,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_irq_safe(&pdev->dev); - sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name); - if (!sr_info->name) { - dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n", - __func__); - ret = -ENOMEM; - goto err_release_region; - } + snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name); sr_info->pdev = pdev; sr_info->srid = pdev->id; @@ -910,13 +898,6 @@ static int __init omap_sr_probe(struct platform_device *pdev) sr_info->autocomp_active = false; sr_info->ip_type = pdata->ip_type; - sr_info->base = ioremap(mem->start, resource_size(mem)); - if (!sr_info->base) { - dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); - ret = -ENOMEM; - goto err_free_name; - } - if (irq) sr_info->irq = irq->start; @@ -932,7 +913,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_iounmap; + goto err_list_del; } } @@ -943,7 +924,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = PTR_ERR(sr_dbg_dir); pr_err("%s:sr debugfs dir creation failed(%d)\n", __func__, ret); - goto err_iounmap; + goto err_list_del; } } @@ -996,16 +977,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) err_debugfs: debugfs_remove_recursive(sr_info->dbg_dir); -err_iounmap: +err_list_del: list_del(&sr_info->node); - iounmap(sr_info->base); -err_free_name: - kfree(sr_info->name); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); -err_free_devinfo: - kfree(sr_info); - return ret; } @@ -1013,7 +986,6 @@ static int omap_sr_remove(struct platform_device *pdev) { struct omap_sr_data *pdata = pdev->dev.platform_data; struct omap_sr *sr_info; - struct resource *mem; if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); @@ -1034,12 +1006,6 @@ static int omap_sr_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); list_del(&sr_info->node); - iounmap(sr_info->base); - kfree(sr_info->name); - kfree(sr_info); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - return 0; } -- cgit v0.10.2 From 82467a5a885ddd9f80309682159da8db510e7832 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Fri, 7 Jun 2013 21:53:09 +0000 Subject: cpuidle: simplify multiple driver support Commit bf4d1b5 (cpuidle: support multiple drivers) introduced support for using multiple cpuidle drivers at the same time. It added a couple of new APIs to register the driver per CPU, but that led to some unnecessary code complexity related to the kernel config options deciding whether or not the multiple driver support is enabled. The code has to work as it did before when the multiple driver support is not enabled and the multiple driver support has to be compatible with the previously existing API. Remove the new API, not used by any driver in the tree yet (but needed for the HMP cpuidle drivers that will be submitted soon), and add a new cpumask pointer to the cpuidle driver structure that will point to the mask of CPUs handled by the given driver. That will allow the cpuidle_[un]register_driver() API to be used for the multiple driver support along with the cpuidle_[un]register() functions added recently. [rjw: Changelog] Signed-off-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index c3a93fe..fdc432f 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -466,7 +466,7 @@ void cpuidle_unregister(struct cpuidle_driver *drv) int cpu; struct cpuidle_device *device; - for_each_possible_cpu(cpu) { + for_each_cpu(cpu, drv->cpumask) { device = &per_cpu(cpuidle_dev, cpu); cpuidle_unregister_device(device); } @@ -498,7 +498,7 @@ int cpuidle_register(struct cpuidle_driver *drv, return ret; } - for_each_possible_cpu(cpu) { + for_each_cpu(cpu, drv->cpumask) { device = &per_cpu(cpuidle_dev, cpu); device->cpu = cpu; diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 8dfaaae..e75fa54 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -18,167 +18,140 @@ DEFINE_SPINLOCK(cpuidle_driver_lock); -static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu); -static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu); +#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS -static void cpuidle_setup_broadcast_timer(void *arg) +static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers); + +static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) { - int cpu = smp_processor_id(); - clockevents_notify((long)(arg), &cpu); + return per_cpu(cpuidle_drivers, cpu); } -static void __cpuidle_driver_init(struct cpuidle_driver *drv, int cpu) +static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { - int i; - - drv->refcnt = 0; + int cpu; - for (i = drv->state_count - 1; i >= 0 ; i--) { + for_each_cpu(cpu, drv->cpumask) { - if (!(drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP)) + if (drv != __cpuidle_get_cpu_driver(cpu)) continue; - drv->bctimer = 1; - on_each_cpu_mask(get_cpu_mask(cpu), cpuidle_setup_broadcast_timer, - (void *)CLOCK_EVT_NOTIFY_BROADCAST_ON, 1); - break; + per_cpu(cpuidle_drivers, cpu) = NULL; } } -static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu) +static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) { - if (!drv || !drv->state_count) - return -EINVAL; - - if (cpuidle_disabled()) - return -ENODEV; + int cpu; - if (__cpuidle_get_cpu_driver(cpu)) - return -EBUSY; + for_each_cpu(cpu, drv->cpumask) { - __cpuidle_driver_init(drv, cpu); + if (__cpuidle_get_cpu_driver(cpu)) { + __cpuidle_unset_driver(drv); + return -EBUSY; + } - __cpuidle_set_cpu_driver(drv, cpu); + per_cpu(cpuidle_drivers, cpu) = drv; + } return 0; } -static void __cpuidle_unregister_driver(struct cpuidle_driver *drv, int cpu) -{ - if (drv != __cpuidle_get_cpu_driver(cpu)) - return; +#else - if (!WARN_ON(drv->refcnt > 0)) - __cpuidle_set_cpu_driver(NULL, cpu); +static struct cpuidle_driver *cpuidle_curr_driver; - if (drv->bctimer) { - drv->bctimer = 0; - on_each_cpu_mask(get_cpu_mask(cpu), cpuidle_setup_broadcast_timer, - (void *)CLOCK_EVT_NOTIFY_BROADCAST_OFF, 1); - } +static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) +{ + return cpuidle_curr_driver; } -#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS +static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) +{ + if (cpuidle_curr_driver) + return -EBUSY; -static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers); + cpuidle_curr_driver = drv; -static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - per_cpu(cpuidle_drivers, cpu) = drv; + return 0; } -static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) +static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { - return per_cpu(cpuidle_drivers, cpu); + if (drv == cpuidle_curr_driver) + cpuidle_curr_driver = NULL; } -static void __cpuidle_unregister_all_cpu_driver(struct cpuidle_driver *drv) +#endif + +static void cpuidle_setup_broadcast_timer(void *arg) { - int cpu; - for_each_present_cpu(cpu) - __cpuidle_unregister_driver(drv, cpu); + int cpu = smp_processor_id(); + clockevents_notify((long)(arg), &cpu); } -static int __cpuidle_register_all_cpu_driver(struct cpuidle_driver *drv) +static int __cpuidle_driver_init(struct cpuidle_driver *drv) { - int ret = 0; - int i, cpu; + int i; - for_each_present_cpu(cpu) { - ret = __cpuidle_register_driver(drv, cpu); - if (ret) - break; - } + drv->refcnt = 0; - if (ret) - for_each_present_cpu(i) { - if (i == cpu) - break; - __cpuidle_unregister_driver(drv, i); - } + if (!drv->cpumask) + drv->cpumask = (struct cpumask *)cpu_possible_mask; + for (i = drv->state_count - 1; i >= 0 ; i--) { - return ret; + if (!(drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP)) + continue; + + drv->bctimer = 1; + break; + } + + return 0; } -int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu) +static int __cpuidle_register_driver(struct cpuidle_driver *drv) { int ret; - spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_driver(drv, cpu); - spin_unlock(&cpuidle_driver_lock); + if (!drv || !drv->state_count) + return -EINVAL; - return ret; -} + if (cpuidle_disabled()) + return -ENODEV; -void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_driver(drv, cpu); - spin_unlock(&cpuidle_driver_lock); -} + ret = __cpuidle_driver_init(drv); + if (ret) + return ret; -/** - * cpuidle_register_driver - registers a driver - * @drv: the driver - */ -int cpuidle_register_driver(struct cpuidle_driver *drv) -{ - int ret; + ret = __cpuidle_set_driver(drv); + if (ret) + return ret; - spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_all_cpu_driver(drv); - spin_unlock(&cpuidle_driver_lock); + if (drv->bctimer) + on_each_cpu_mask(drv->cpumask, cpuidle_setup_broadcast_timer, + (void *)CLOCK_EVT_NOTIFY_BROADCAST_ON, 1); - return ret; + return 0; } -EXPORT_SYMBOL_GPL(cpuidle_register_driver); /** * cpuidle_unregister_driver - unregisters a driver * @drv: the driver */ -void cpuidle_unregister_driver(struct cpuidle_driver *drv) +static void __cpuidle_unregister_driver(struct cpuidle_driver *drv) { - spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_all_cpu_driver(drv); - spin_unlock(&cpuidle_driver_lock); -} -EXPORT_SYMBOL_GPL(cpuidle_unregister_driver); - -#else - -static struct cpuidle_driver *cpuidle_curr_driver; + if (WARN_ON(drv->refcnt > 0)) + return; -static inline void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - cpuidle_curr_driver = drv; -} + if (drv->bctimer) { + drv->bctimer = 0; + on_each_cpu_mask(drv->cpumask, cpuidle_setup_broadcast_timer, + (void *)CLOCK_EVT_NOTIFY_BROADCAST_OFF, 1); + } -static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) -{ - return cpuidle_curr_driver; + __cpuidle_unset_driver(drv); } /** @@ -187,13 +160,11 @@ static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) */ int cpuidle_register_driver(struct cpuidle_driver *drv) { - int ret, cpu; + int ret; - cpu = get_cpu(); spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_driver(drv, cpu); + ret = __cpuidle_register_driver(drv); spin_unlock(&cpuidle_driver_lock); - put_cpu(); return ret; } @@ -205,16 +176,11 @@ EXPORT_SYMBOL_GPL(cpuidle_register_driver); */ void cpuidle_unregister_driver(struct cpuidle_driver *drv) { - int cpu; - - cpu = get_cpu(); spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_driver(drv, cpu); + __cpuidle_unregister_driver(drv); spin_unlock(&cpuidle_driver_lock); - put_cpu(); } EXPORT_SYMBOL_GPL(cpuidle_unregister_driver); -#endif /** * cpuidle_get_driver - return the current driver diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 8f04062..0bc4b74 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -111,6 +111,9 @@ struct cpuidle_driver { struct cpuidle_state states[CPUIDLE_STATE_MAX]; int state_count; int safe_state_index; + + /* the driver handles the cpus in cpumask */ + struct cpumask *cpumask; }; #ifdef CONFIG_CPU_IDLE @@ -135,9 +138,6 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev); extern int cpuidle_play_dead(void); extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev); -extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu); -extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu); - #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } -- cgit v0.10.2 From 6d19cb93d60a5403753756c502699751116c954c Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Fri, 7 Jun 2013 21:53:10 +0000 Subject: cpuidle: Comment the driver's framework code Add kerneldoc (and other) comments to the cpuidle driver's framework code. Signed-off-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index e75fa54..3ac499d 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -22,11 +22,26 @@ DEFINE_SPINLOCK(cpuidle_driver_lock); static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers); +/** + * __cpuidle_get_cpu_driver - return the cpuidle driver tied to a CPU. + * @cpu: the CPU handled by the driver + * + * Returns a pointer to struct cpuidle_driver or NULL if no driver has been + * registered for @cpu. + */ static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) { return per_cpu(cpuidle_drivers, cpu); } +/** + * __cpuidle_unset_driver - unset per CPU driver variables. + * @drv: a valid pointer to a struct cpuidle_driver + * + * For each CPU in the driver's CPU mask, unset the registered driver per CPU + * variable. If @drv is different from the registered driver, the corresponding + * variable is not cleared. + */ static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { int cpu; @@ -40,6 +55,15 @@ static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) } } +/** + * __cpuidle_set_driver - set per CPU driver variables the the given driver. + * @drv: a valid pointer to a struct cpuidle_driver + * + * For each CPU in the driver's cpumask, unset the registered driver per CPU + * to @drv. + * + * Returns 0 on success, -EBUSY if the CPUs have driver(s) already. + */ static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) { int cpu; @@ -61,11 +85,24 @@ static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) static struct cpuidle_driver *cpuidle_curr_driver; +/** + * __cpuidle_get_cpu_driver - return the global cpuidle driver pointer. + * @cpu: ignored without the multiple driver support + * + * Return a pointer to a struct cpuidle_driver object or NULL if no driver was + * previously registered. + */ static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) { return cpuidle_curr_driver; } +/** + * __cpuidle_set_driver - assign the global cpuidle driver variable. + * @drv: pointer to a struct cpuidle_driver object + * + * Returns 0 on success, -EBUSY if the driver is already registered. + */ static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) { if (cpuidle_curr_driver) @@ -76,6 +113,13 @@ static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) return 0; } +/** + * __cpuidle_unset_driver - unset the global cpuidle driver variable. + * @drv: a pointer to a struct cpuidle_driver + * + * Reset the global cpuidle variable to NULL. If @drv does not match the + * registered driver, do nothing. + */ static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { if (drv == cpuidle_curr_driver) @@ -84,21 +128,49 @@ static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) #endif +/** + * cpuidle_setup_broadcast_timer - enable/disable the broadcast timer + * @arg: a void pointer used to match the SMP cross call API + * + * @arg is used as a value of type 'long' with on of the two values: + * - CLOCK_EVT_NOTIFY_BROADCAST_ON + * - CLOCK_EVT_NOTIFY_BROADCAST_OFF + * + * Set the broadcast timer notification for the current CPU. This function + * is executed per CPU by an SMP cross call. It not supposed to be called + * directly. + */ static void cpuidle_setup_broadcast_timer(void *arg) { int cpu = smp_processor_id(); clockevents_notify((long)(arg), &cpu); } +/** + * __cpuidle_driver_init - initialize the driver's internal data + * @drv: a valid pointer to a struct cpuidle_driver + * + * Returns 0 on success, a negative error code otherwise. + */ static int __cpuidle_driver_init(struct cpuidle_driver *drv) { int i; drv->refcnt = 0; + /* + * Use all possible CPUs as the default, because if the kernel boots + * with some CPUs offline and then we online one of them, the CPU + * notifier has to know which driver to assign. + */ if (!drv->cpumask) drv->cpumask = (struct cpumask *)cpu_possible_mask; + /* + * Look for the timer stop flag in the different states, so that we know + * if the broadcast timer has to be set up. The loop is in the reverse + * order, because usually on of the the deeper states has this flag set. + */ for (i = drv->state_count - 1; i >= 0 ; i--) { if (!(drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP)) @@ -111,6 +183,19 @@ static int __cpuidle_driver_init(struct cpuidle_driver *drv) return 0; } +/** + * __cpuidle_register_driver: register the driver + * @drv: a valid pointer to a struct cpuidle_driver + * + * Do some sanity checks, initialize the driver, assign the driver to the + * global cpuidle driver variable(s) and set up the broadcast timer if the + * cpuidle driver has some states that shut down the local timer. + * + * Returns 0 on success, a negative error code otherwise: + * * -EINVAL if the driver pointer is NULL or no idle states are available + * * -ENODEV if the cpuidle framework is disabled + * * -EBUSY if the driver is already assigned to the global variable(s) + */ static int __cpuidle_register_driver(struct cpuidle_driver *drv) { int ret; @@ -137,8 +222,13 @@ static int __cpuidle_register_driver(struct cpuidle_driver *drv) } /** - * cpuidle_unregister_driver - unregisters a driver - * @drv: the driver + * __cpuidle_unregister_driver - unregister the driver + * @drv: a valid pointer to a struct cpuidle_driver + * + * Check if the driver is no longer in use, reset the global cpuidle driver + * variable(s) and disable the timer broadcast notification mechanism if it was + * in use. + * */ static void __cpuidle_unregister_driver(struct cpuidle_driver *drv) { @@ -156,7 +246,13 @@ static void __cpuidle_unregister_driver(struct cpuidle_driver *drv) /** * cpuidle_register_driver - registers a driver - * @drv: the driver + * @drv: a pointer to a valid struct cpuidle_driver + * + * Register the driver under a lock to prevent concurrent attempts to + * [un]register the driver from occuring at the same time. + * + * Returns 0 on success, a negative error code (returned by + * __cpuidle_register_driver()) otherwise. */ int cpuidle_register_driver(struct cpuidle_driver *drv) { @@ -172,7 +268,11 @@ EXPORT_SYMBOL_GPL(cpuidle_register_driver); /** * cpuidle_unregister_driver - unregisters a driver - * @drv: the driver + * @drv: a pointer to a valid struct cpuidle_driver + * + * Unregisters the cpuidle driver under a lock to prevent concurrent attempts + * to [un]register the driver from occuring at the same time. @drv has to + * match the currently registered driver. */ void cpuidle_unregister_driver(struct cpuidle_driver *drv) { @@ -183,7 +283,9 @@ void cpuidle_unregister_driver(struct cpuidle_driver *drv) EXPORT_SYMBOL_GPL(cpuidle_unregister_driver); /** - * cpuidle_get_driver - return the current driver + * cpuidle_get_driver - return the driver tied to the current CPU. + * + * Returns a struct cpuidle_driver pointer, or NULL if no driver is registered. */ struct cpuidle_driver *cpuidle_get_driver(void) { @@ -199,7 +301,11 @@ struct cpuidle_driver *cpuidle_get_driver(void) EXPORT_SYMBOL_GPL(cpuidle_get_driver); /** - * cpuidle_get_cpu_driver - return the driver tied with a cpu + * cpuidle_get_cpu_driver - return the driver registered for a CPU. + * @dev: a valid pointer to a struct cpuidle_device + * + * Returns a struct cpuidle_driver pointer, or NULL if no driver is registered + * for the CPU associated with @dev. */ struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev) { @@ -210,6 +316,14 @@ struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev) } EXPORT_SYMBOL_GPL(cpuidle_get_cpu_driver); +/** + * cpuidle_driver_ref - get a reference to the driver. + * + * Increment the reference counter of the cpuidle driver associated with + * the current CPU. + * + * Returns a pointer to the driver, or NULL if the current CPU has no driver. + */ struct cpuidle_driver *cpuidle_driver_ref(void) { struct cpuidle_driver *drv; @@ -223,6 +337,12 @@ struct cpuidle_driver *cpuidle_driver_ref(void) return drv; } +/** + * cpuidle_driver_unref - puts down the refcount for the driver + * + * Decrement the reference counter of the cpuidle driver associated with + * the current CPU. + */ void cpuidle_driver_unref(void) { struct cpuidle_driver *drv = cpuidle_get_driver(); -- cgit v0.10.2 From b39b0981b0811943d724915a8a0150d6ac5110e0 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 11 Jun 2013 08:09:45 +0000 Subject: cpuidle: Fix ARCH_NEEDS_CPU_IDLE_COUPLED dependency warning Before commit d6f346f (cpuidle: improve governor Kconfig options), the CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED option didn't depend on CONFIG_CPU_IDLE but now it has been moved under the CPU_IDLE menuconfig. That raises the following warnings: warning: (ARCH_OMAP4 && ARCH_TEGRA_2x_SOC) selects ARCH_NEEDS_CPU_IDLE_COUPLED which has unmet direct dependencies (CPU_IDLE) warning: (ARCH_OMAP4 && ARCH_TEGRA_2x_SOC) selects ARCH_NEEDS_CPU_IDLE_COUPLED which has unmet direct dependencies (CPU_IDLE) because the tegra2 and omap4 Kconfig files select this option without checking if CPU_IDLE is set. Fix that by moving ARCH_NEEDS_CPU_IDLE_COUPLED outside of CPU_IDLE. [rjw: Changelog] Signed-off-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index a7d2e83..81de5d9 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -29,9 +29,6 @@ config CPU_IDLE_GOV_MENU bool "Menu governor (for tickless system)" default y -config ARCH_NEEDS_CPU_IDLE_COUPLED - def_bool n - config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK @@ -45,3 +42,6 @@ config CPU_IDLE_ZYNQ Select this to enable cpuidle on Xilinx Zynq processors. endif + +config ARCH_NEEDS_CPU_IDLE_COUPLED + def_bool n -- cgit v0.10.2 From 9350de06be45a5a8b927ac6577c9d35de61c90ca Mon Sep 17 00:00:00 2001 From: Bernie Thompson Date: Sat, 1 Jun 2013 00:47:43 +0000 Subject: PM / wakeup: Adjust messaging for wake events during suspend This adds in a new message to the wakeup code which adds an indication to the log that suspend was cancelled due to a wake event occouring during the suspend sequence. It also adjusts the message printed in suspend.c to reflect the potential that a suspend was aborted, as opposed to a device failing to suspend. Without these message adjustments one can end up with a kernel log that says that a device failed to suspend with no actual device suspend failures, which can be confusing to the log examiner. Signed-off-by: Bernie Thompson Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 79715e7..407a2ef 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -707,8 +707,10 @@ bool pm_wakeup_pending(void) } spin_unlock_irqrestore(&events_lock, flags); - if (ret) + if (ret) { + pr_info("PM: Wakeup pending, aborting suspend\n"); print_active_wakeup_sources(); + } return ret; } diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index bef86d1..ece0422 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -269,7 +269,7 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_test_start(); error = dpm_suspend_start(PMSG_SUSPEND); if (error) { - printk(KERN_ERR "PM: Some devices failed to suspend\n"); + pr_err("PM: Some devices failed to suspend, or early wake event detected\n"); goto Recover_platform; } suspend_test_finish("suspend devices"); -- cgit v0.10.2 From d9e455f53f6fb93c764de2399c3894bbdfd2caa7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 10 Jun 2013 13:00:50 +0200 Subject: ACPI / scan: Simplify ACPI driver probing There is no particular reason why acpi_bus_driver_init() needs to be a separate function and its location with respect to its only caller, acpi_device_probe(), makes the code a bit difficult to follow. Besides, it doesn't really make sense to check if 'device' is not NULL in acpi_bus_driver_init(), because we've already dereferenced dev->driver in acpi_device_probe() at that point and, moreover, 'device' cannot be NULL then, because acpi_device_probe() is called via really_probe() (which also sets dev->driver for that matter). For these reasons, drop acpi_bus_driver_init() altogether and move the remaining code from it directly into acpi_device_probe(). Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b14ac46..4eeea22 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -816,32 +816,40 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device) acpi_device_notify); } -static int acpi_bus_driver_init(struct acpi_device *, struct acpi_driver *); -static int acpi_device_probe(struct device * dev) +static int acpi_device_probe(struct device *dev) { struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); int ret; - ret = acpi_bus_driver_init(acpi_dev, acpi_drv); - if (!ret) { - if (acpi_drv->ops.notify) { - ret = acpi_device_install_notify_handler(acpi_dev); - if (ret) { - if (acpi_drv->ops.remove) - acpi_drv->ops.remove(acpi_dev); - acpi_dev->driver = NULL; - acpi_dev->driver_data = NULL; - return ret; - } - } + if (!acpi_drv->ops.add) + return -ENOSYS; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Found driver [%s] for device [%s]\n", - acpi_drv->name, acpi_dev->pnp.bus_id)); - get_device(dev); + ret = acpi_drv->ops.add(acpi_dev); + if (ret) + return ret; + + acpi_dev->driver = acpi_drv; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Driver [%s] successfully bound to device [%s]\n", + acpi_drv->name, acpi_dev->pnp.bus_id)); + + if (acpi_drv->ops.notify) { + ret = acpi_device_install_notify_handler(acpi_dev); + if (ret) { + if (acpi_drv->ops.remove) + acpi_drv->ops.remove(acpi_dev); + + acpi_dev->driver = NULL; + acpi_dev->driver_data = NULL; + return ret; + } } - return ret; + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n", + acpi_drv->name, acpi_dev->pnp.bus_id)); + get_device(dev); + return 0; } static int acpi_device_remove(struct device * dev) @@ -998,41 +1006,6 @@ static void acpi_device_unregister(struct acpi_device *device) Driver Management -------------------------------------------------------------------------- */ /** - * acpi_bus_driver_init - add a device to a driver - * @device: the device to add and initialize - * @driver: driver for the device - * - * Used to initialize a device via its device driver. Called whenever a - * driver is bound to a device. Invokes the driver's add() ops. - */ -static int -acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver) -{ - int result = 0; - - if (!device || !driver) - return -EINVAL; - - if (!driver->ops.add) - return -ENOSYS; - - result = driver->ops.add(device); - if (result) - return result; - - device->driver = driver; - - /* - * TBD - Configuration Management: Assign resources to device based - * upon possible configuration and currently allocated resources. - */ - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Driver successfully bound to device\n")); - return 0; -} - -/** * acpi_bus_register_driver - register a driver with the ACPI bus * @driver: driver being registered * -- cgit v0.10.2 From 88ec28603c09ccba0346c15eef64ff0b4327c9ee Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Sat, 8 Jun 2013 00:57:47 +0000 Subject: ACPICA: Split buffer dump routines into separate file To enhance configurability of ACPICA. The new file is utilities/utbuffer.c Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 29b3dab..474901e 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -146,6 +146,7 @@ acpi-y += \ acpi-y += \ utaddress.o \ utalloc.o \ + utbuffer.o \ utcopy.o \ utexcep.o \ utdebug.o \ diff --git a/drivers/acpi/acpica/utbuffer.c b/drivers/acpi/acpica/utbuffer.c new file mode 100644 index 0000000..11fde93 --- /dev/null +++ b/drivers/acpi/acpica/utbuffer.c @@ -0,0 +1,201 @@ +/****************************************************************************** + * + * Module Name: utbuffer - Buffer dump routines + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utbuffer") + +/******************************************************************************* + * + * FUNCTION: acpi_ut_dump_buffer + * + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display: + * DB_BYTE_DISPLAY + * DB_WORD_DISPLAY + * DB_DWORD_DISPLAY + * DB_QWORD_DISPLAY + * base_offset - Beginning buffer offset (display only) + * + * RETURN: None + * + * DESCRIPTION: Generic dump buffer in both hex and ascii. + * + ******************************************************************************/ +void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset) +{ + u32 i = 0; + u32 j; + u32 temp32; + u8 buf_char; + + if (!buffer) { + acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n"); + return; + } + + if ((count < 4) || (count & 0x01)) { + display = DB_BYTE_DISPLAY; + } + + /* Nasty little dump buffer routine! */ + + while (i < count) { + + /* Print current offset */ + + acpi_os_printf("%6.4X: ", (base_offset + i)); + + /* Print 16 hex chars */ + + for (j = 0; j < 16;) { + if (i + j >= count) { + + /* Dump fill spaces */ + + acpi_os_printf("%*s", ((display * 2) + 1), " "); + j += display; + continue; + } + + switch (display) { + case DB_BYTE_DISPLAY: + default: /* Default is BYTE display */ + + acpi_os_printf("%02X ", + buffer[(acpi_size) i + j]); + break; + + case DB_WORD_DISPLAY: + + ACPI_MOVE_16_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%04X ", temp32); + break; + + case DB_DWORD_DISPLAY: + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%08X ", temp32); + break; + + case DB_QWORD_DISPLAY: + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%08X", temp32); + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j + + 4]); + acpi_os_printf("%08X ", temp32); + break; + } + + j += display; + } + + /* + * Print the ASCII equivalent characters but watch out for the bad + * unprintable ones (printable chars are 0x20 through 0x7E) + */ + acpi_os_printf(" "); + for (j = 0; j < 16; j++) { + if (i + j >= count) { + acpi_os_printf("\n"); + return; + } + + buf_char = buffer[(acpi_size) i + j]; + if (ACPI_IS_PRINT(buf_char)) { + acpi_os_printf("%c", buf_char); + } else { + acpi_os_printf("."); + } + } + + /* Done with that line. */ + + acpi_os_printf("\n"); + i += 16; + } + + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_debug_dump_buffer + * + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display: + * DB_BYTE_DISPLAY + * DB_WORD_DISPLAY + * DB_DWORD_DISPLAY + * DB_QWORD_DISPLAY + * component_ID - Caller's component ID + * + * RETURN: None + * + * DESCRIPTION: Generic dump buffer in both hex and ascii. + * + ******************************************************************************/ + +void +acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id) +{ + + /* Only dump the buffer if tracing is enabled */ + + if (!((ACPI_LV_TABLES & acpi_dbg_level) && + (component_id & acpi_dbg_layer))) { + return; + } + + acpi_ut_dump_buffer(buffer, count, display, 0); +} diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index c57d9cc..5796e11 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: utdebug - Debug print routines + * Module Name: utdebug - Debug print/trace routines * *****************************************************************************/ @@ -543,149 +543,3 @@ acpi_ut_ptr_exit(u32 line_number, } #endif - -/******************************************************************************* - * - * FUNCTION: acpi_ut_dump_buffer - * - * PARAMETERS: buffer - Buffer to dump - * count - Amount to dump, in bytes - * display - BYTE, WORD, DWORD, or QWORD display - * offset - Beginning buffer offset (display only) - * - * RETURN: None - * - * DESCRIPTION: Generic dump buffer in both hex and ascii. - * - ******************************************************************************/ - -void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset) -{ - u32 i = 0; - u32 j; - u32 temp32; - u8 buf_char; - - if (!buffer) { - acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n"); - return; - } - - if ((count < 4) || (count & 0x01)) { - display = DB_BYTE_DISPLAY; - } - - /* Nasty little dump buffer routine! */ - - while (i < count) { - - /* Print current offset */ - - acpi_os_printf("%6.4X: ", (base_offset + i)); - - /* Print 16 hex chars */ - - for (j = 0; j < 16;) { - if (i + j >= count) { - - /* Dump fill spaces */ - - acpi_os_printf("%*s", ((display * 2) + 1), " "); - j += display; - continue; - } - - switch (display) { - case DB_BYTE_DISPLAY: - default: /* Default is BYTE display */ - - acpi_os_printf("%02X ", - buffer[(acpi_size) i + j]); - break; - - case DB_WORD_DISPLAY: - - ACPI_MOVE_16_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%04X ", temp32); - break; - - case DB_DWORD_DISPLAY: - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%08X ", temp32); - break; - - case DB_QWORD_DISPLAY: - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%08X", temp32); - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j + - 4]); - acpi_os_printf("%08X ", temp32); - break; - } - - j += display; - } - - /* - * Print the ASCII equivalent characters but watch out for the bad - * unprintable ones (printable chars are 0x20 through 0x7E) - */ - acpi_os_printf(" "); - for (j = 0; j < 16; j++) { - if (i + j >= count) { - acpi_os_printf("\n"); - return; - } - - buf_char = buffer[(acpi_size) i + j]; - if (ACPI_IS_PRINT(buf_char)) { - acpi_os_printf("%c", buf_char); - } else { - acpi_os_printf("."); - } - } - - /* Done with that line. */ - - acpi_os_printf("\n"); - i += 16; - } - - return; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_debug_dump_buffer - * - * PARAMETERS: buffer - Buffer to dump - * count - Amount to dump, in bytes - * display - BYTE, WORD, DWORD, or QWORD display - * component_ID - Caller's component ID - * - * RETURN: None - * - * DESCRIPTION: Generic dump buffer in both hex and ascii. - * - ******************************************************************************/ - -void -acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id) -{ - - /* Only dump the buffer if tracing is enabled */ - - if (!((ACPI_LV_TABLES & acpi_dbg_level) && - (component_id & acpi_dbg_layer))) { - return; - } - - acpi_ut_dump_buffer(buffer, count, display, 0); -} -- cgit v0.10.2 From b6872ff9a4785a790f9647ee2076e7e616a3bb0e Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Sat, 8 Jun 2013 00:58:00 +0000 Subject: ACPICA: Split internal error msg routines to a separate file Improves configurability of ACPICA. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 474901e..987bf41 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -152,6 +152,7 @@ acpi-y += \ utdebug.o \ utdecode.o \ utdelete.o \ + uterror.o \ uteval.o \ utglobal.o \ utids.o \ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 19e5cf7..d552036 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -87,6 +87,48 @@ extern const char *acpi_gbl_fc_decode[]; extern const char *acpi_gbl_pt_decode[]; #endif +/* + * For the iASL compiler case, the output is redirected to stderr so that + * any of the various ACPI errors and warnings do not appear in the output + * files, for either the compiler or disassembler portions of the tool. + */ +#ifdef ACPI_ASL_COMPILER + +#include +extern FILE *acpi_gbl_output_file; + +#define ACPI_MSG_REDIRECT_BEGIN \ + FILE *output_file = acpi_gbl_output_file; \ + acpi_os_redirect_output (stderr); + +#define ACPI_MSG_REDIRECT_END \ + acpi_os_redirect_output (output_file); + +#else +/* + * non-iASL case - no redirection, nothing to do + */ +#define ACPI_MSG_REDIRECT_BEGIN +#define ACPI_MSG_REDIRECT_END +#endif + +/* + * Common error message prefixes + */ +#define ACPI_MSG_ERROR "ACPI Error: " +#define ACPI_MSG_EXCEPTION "ACPI Exception: " +#define ACPI_MSG_WARNING "ACPI Warning: " +#define ACPI_MSG_INFO "ACPI: " + +#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Error (bug): " +#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Warning (bug): " + +/* + * Common message suffix + */ +#define ACPI_MSG_SUFFIX \ + acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) + /* Types for Resource descriptor entries */ #define ACPI_INVALID_RESOURCE 0 diff --git a/drivers/acpi/acpica/uterror.c b/drivers/acpi/acpica/uterror.c new file mode 100644 index 0000000..154fdca --- /dev/null +++ b/drivers/acpi/acpica/uterror.c @@ -0,0 +1,289 @@ +/******************************************************************************* + * + * Module Name: uterror - Various internal error/warning output functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("uterror") + +/* + * This module contains internal error functions that may + * be configured out. + */ +#if !defined (ACPI_NO_ERROR_MESSAGES) +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_warning + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Warnings for the predefined validation module. Messages are + * only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of error + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_warning(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_WARNING "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_info + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Info messages for the predefined validation module. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_info(const char *module_name, + u32 line_number, + char *pathname, u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_INFO "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_bios_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: BIOS error message for predefined names. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_bios_error(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_BIOS_ERROR "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_namespace_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * internal_name - Name or path of the namespace node + * lookup_status - Exception code from NS lookup + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the NS node. + * + ******************************************************************************/ + +void +acpi_ut_namespace_error(const char *module_name, + u32 line_number, + const char *internal_name, acpi_status lookup_status) +{ + acpi_status status; + u32 bad_name; + char *name = NULL; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (lookup_status == AE_BAD_CHARACTER) { + + /* There is a non-ascii character in the name */ + + ACPI_MOVE_32_TO_32(&bad_name, + ACPI_CAST_PTR(u32, internal_name)); + acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name); + } else { + /* Convert path to external format */ + + status = acpi_ns_externalize_name(ACPI_UINT32_MAX, + internal_name, NULL, &name); + + /* Print target name */ + + if (ACPI_SUCCESS(status)) { + acpi_os_printf("[%s]", name); + } else { + acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); + } + + if (name) { + ACPI_FREE(name); + } + } + + acpi_os_printf(" Namespace lookup failure, %s", + acpi_format_exception(lookup_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_method_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * message - Error message to use on failure + * prefix_node - Prefix relative to the path + * path - Path to the node (optional) + * method_status - Execution status + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the method. + * + ******************************************************************************/ + +void +acpi_ut_method_error(const char *module_name, + u32 line_number, + const char *message, + struct acpi_namespace_node *prefix_node, + const char *path, acpi_status method_status) +{ + acpi_status status; + struct acpi_namespace_node *node = prefix_node; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (path) { + status = + acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, + &node); + if (ACPI_FAILURE(status)) { + acpi_os_printf("[Could not get node by pathname]"); + } + } + + acpi_ns_print_node_pathname(node, message); + acpi_os_printf(", %s", acpi_format_exception(method_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +#endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 1673ddd..9d68029 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -68,7 +68,7 @@ ACPI_MODULE_NAME("uteval") ******************************************************************************/ acpi_status -acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node, +acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, char *path, u32 expected_return_btypes, union acpi_operand_object **return_desc) diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 61a2c17..e966a2e 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -44,7 +44,6 @@ #include #include #include "accommon.h" -#include "acnamesp.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utxferror") @@ -52,43 +51,7 @@ ACPI_MODULE_NAME("utxferror") /* * This module is used for the in-kernel ACPICA as well as the ACPICA * tools/applications. - * - * For the iASL compiler case, the output is redirected to stderr so that - * any of the various ACPI errors and warnings do not appear in the output - * files, for either the compiler or disassembler portions of the tool. - */ -#ifdef ACPI_ASL_COMPILER -#include -extern FILE *acpi_gbl_output_file; - -#define ACPI_MSG_REDIRECT_BEGIN \ - FILE *output_file = acpi_gbl_output_file; \ - acpi_os_redirect_output (stderr); - -#define ACPI_MSG_REDIRECT_END \ - acpi_os_redirect_output (output_file); - -#else -/* - * non-iASL case - no redirection, nothing to do - */ -#define ACPI_MSG_REDIRECT_BEGIN -#define ACPI_MSG_REDIRECT_END -#endif -/* - * Common message prefixes */ -#define ACPI_MSG_ERROR "ACPI Error: " -#define ACPI_MSG_EXCEPTION "ACPI Exception: " -#define ACPI_MSG_WARNING "ACPI Warning: " -#define ACPI_MSG_INFO "ACPI: " -#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Error (bug): " -#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Warning (bug): " -/* - * Common message suffix - */ -#define ACPI_MSG_SUFFIX \ - acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) /******************************************************************************* * * FUNCTION: acpi_error @@ -285,243 +248,3 @@ acpi_bios_warning(const char *module_name, } ACPI_EXPORT_SYMBOL(acpi_bios_warning) - -/* - * The remainder of this module contains internal error functions that may - * be configured out. - */ -#if !defined (ACPI_NO_ERROR_MESSAGES) && !defined (ACPI_BIN_APP) -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_warning - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Warnings for the predefined validation module. Messages are - * only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of error - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_warning(const char *module_name, - u32 line_number, - char *pathname, - u8 node_flags, const char *format, ...) -{ - va_list arg_list; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf(ACPI_MSG_WARNING "%s: ", pathname); - - va_start(arg_list, format); - acpi_os_vprintf(format, arg_list); - ACPI_MSG_SUFFIX; - va_end(arg_list); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_info - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Info messages for the predefined validation module. Messages - * are only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_info(const char *module_name, - u32 line_number, - char *pathname, u8 node_flags, const char *format, ...) -{ - va_list arg_list; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf(ACPI_MSG_INFO "%s: ", pathname); - - va_start(arg_list, format); - acpi_os_vprintf(format, arg_list); - ACPI_MSG_SUFFIX; - va_end(arg_list); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_bios_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: BIOS error message for predefined names. Messages - * are only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_bios_error(const char *module_name, - u32 line_number, - char *pathname, - u8 node_flags, const char *format, ...) -{ - va_list arg_list; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf(ACPI_MSG_BIOS_ERROR "%s: ", pathname); - - va_start(arg_list, format); - acpi_os_vprintf(format, arg_list); - ACPI_MSG_SUFFIX; - va_end(arg_list); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_namespace_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * internal_name - Name or path of the namespace node - * lookup_status - Exception code from NS lookup - * - * RETURN: None - * - * DESCRIPTION: Print error message with the full pathname for the NS node. - * - ******************************************************************************/ - -void -acpi_ut_namespace_error(const char *module_name, - u32 line_number, - const char *internal_name, acpi_status lookup_status) -{ - acpi_status status; - u32 bad_name; - char *name = NULL; - - ACPI_MSG_REDIRECT_BEGIN; - acpi_os_printf(ACPI_MSG_ERROR); - - if (lookup_status == AE_BAD_CHARACTER) { - - /* There is a non-ascii character in the name */ - - ACPI_MOVE_32_TO_32(&bad_name, - ACPI_CAST_PTR(u32, internal_name)); - acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name); - } else { - /* Convert path to external format */ - - status = acpi_ns_externalize_name(ACPI_UINT32_MAX, - internal_name, NULL, &name); - - /* Print target name */ - - if (ACPI_SUCCESS(status)) { - acpi_os_printf("[%s]", name); - } else { - acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); - } - - if (name) { - ACPI_FREE(name); - } - } - - acpi_os_printf(" Namespace lookup failure, %s", - acpi_format_exception(lookup_status)); - - ACPI_MSG_SUFFIX; - ACPI_MSG_REDIRECT_END; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_method_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * message - Error message to use on failure - * prefix_node - Prefix relative to the path - * path - Path to the node (optional) - * method_status - Execution status - * - * RETURN: None - * - * DESCRIPTION: Print error message with the full pathname for the method. - * - ******************************************************************************/ - -void -acpi_ut_method_error(const char *module_name, - u32 line_number, - const char *message, - struct acpi_namespace_node *prefix_node, - const char *path, acpi_status method_status) -{ - acpi_status status; - struct acpi_namespace_node *node = prefix_node; - - ACPI_MSG_REDIRECT_BEGIN; - acpi_os_printf(ACPI_MSG_ERROR); - - if (path) { - status = - acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, - &node); - if (ACPI_FAILURE(status)) { - acpi_os_printf("[Could not get node by pathname]"); - } - } - - acpi_ns_print_node_pathname(node, message); - acpi_os_printf(", %s", acpi_format_exception(method_status)); - - ACPI_MSG_SUFFIX; - ACPI_MSG_REDIRECT_END; -} - -#endif /* ACPI_NO_ERROR_MESSAGES */ -- cgit v0.10.2 From 1d1ea1b723d9f239f736b8cf284327cbbf9d15d1 Mon Sep 17 00:00:00 2001 From: Chao Guan Date: Sat, 8 Jun 2013 00:58:14 +0000 Subject: ACPICA: Standardize all switch() blocks After many years, different formatting for switch() has crept in. This change makes every switch block identical. Chao Guan. ACPICA bugzilla 997. References: https://bugs.acpica.org/show_bug.cgi?id=997 Signed-off-by: Chao Guan Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c index 7ea0f16..eb56b66 100644 --- a/drivers/acpi/acpica/dscontrol.c +++ b/drivers/acpi/acpica/dscontrol.c @@ -78,7 +78,6 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, switch (op->common.aml_opcode) { case AML_WHILE_OP: - /* * If this is an additional iteration of a while loop, continue. * There is no need to allocate a new control state. @@ -99,7 +98,6 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, /*lint -fallthrough */ case AML_IF_OP: - /* * IF/WHILE: Create a new control state to manage these * constructs. We need to manage these as a stack, in order @@ -142,6 +140,7 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, break; default: + break; } @@ -344,6 +343,7 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state, case AML_NOOP_OP: /* Just do nothing! */ + break; case AML_BREAK_POINT_OP: diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index feadeed..d4bfe7b 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -563,21 +563,25 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, */ switch (walk_state->opcode) { case AML_FIELD_OP: + arg = acpi_ps_get_arg(op, 2); type = ACPI_TYPE_LOCAL_REGION_FIELD; break; case AML_BANK_FIELD_OP: + arg = acpi_ps_get_arg(op, 4); type = ACPI_TYPE_LOCAL_BANK_FIELD; break; case AML_INDEX_FIELD_OP: + arg = acpi_ps_get_arg(op, 3); type = ACPI_TYPE_LOCAL_INDEX_FIELD; break; default: + return_ACPI_STATUS(AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index bc8e63f..1442420 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -127,6 +127,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle, break; default: + break; } diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index 3da8046..c4b0b36 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -285,6 +285,7 @@ acpi_ds_method_data_get_node(u8 type, break; default: + ACPI_ERROR((AE_INFO, "Type %u is invalid", type)); return_ACPI_STATUS(AE_TYPE); } @@ -428,7 +429,6 @@ acpi_ds_method_data_get_value(u8 type, return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG); case ACPI_REFCLASS_LOCAL: - /* * No error message for this case, will be trapped again later to * detect and ignore cases of Store(local_x,local_x) diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index e20e9f8..63f0d22 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -648,7 +648,6 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER: - /* * Defer evaluation of Buffer term_arg operand */ @@ -660,7 +659,6 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, break; case ACPI_TYPE_PACKAGE: - /* * Defer evaluation of Package term_arg operand */ @@ -741,6 +739,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, break; default: + ACPI_ERROR((AE_INFO, "Unknown Integer type 0x%X", op_info->type)); status = AE_AML_OPERAND_TYPE; diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c index ee6367b..1fc1ff1 100644 --- a/drivers/acpi/acpica/dsopcode.c +++ b/drivers/acpi/acpica/dsopcode.c @@ -636,6 +636,7 @@ acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state, break; default: + return_ACPI_STATUS(AE_AML_BAD_OPCODE); } diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index 9977899..c666fc0 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -240,7 +240,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, case AML_IF_OP: case AML_WHILE_OP: - /* * If we are executing the predicate AND this is the predicate op, * we will use the return value @@ -254,7 +253,9 @@ acpi_ds_is_result_used(union acpi_parse_object * op, break; default: + /* Ignore other control opcodes */ + break; } @@ -263,7 +264,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, goto result_not_used; case AML_CLASS_CREATE: - /* * These opcodes allow term_arg(s) as operands and therefore * the operands can be method calls. The result is used. @@ -292,7 +292,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, goto result_not_used; default: - /* * In all other cases. the parent will actually use the return * object, so keep it. diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index e2199a9..151d924 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -327,6 +327,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, break; default: + break; } @@ -488,7 +489,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) break; case AML_TYPE_METHOD_CALL: - /* * If the method is referenced from within a package * declaration, it is not a invocation of the method, just @@ -582,7 +582,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) switch (op->common.parent->common.aml_opcode) { case AML_NAME_OP: - /* * Put the Node on the object stack (Contains the ACPI Name * of this object) diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index 6e17c0e..95e681a 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -74,6 +74,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) switch (pass_number) { case 1: + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE; walk_state->descending_callback = acpi_ds_load1_begin_op; @@ -81,6 +82,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; case 2: + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE; walk_state->descending_callback = acpi_ds_load2_begin_op; @@ -88,6 +90,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; case 3: + #ifndef ACPI_NO_METHOD_EXECUTION walk_state->parse_flags |= ACPI_PARSE_EXECUTE | ACPI_PARSE_DELETE_TREE; @@ -97,6 +100,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; default: + return (AE_BAD_PARAMETER); } @@ -161,7 +165,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, switch (walk_state->opcode) { case AML_SCOPE_OP: - /* * The target name of the Scope() operator must exist at this point so * that we can actually open the scope to enter new names underneath it. @@ -210,7 +213,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * These types we will allow, but we will change the type. * This enables some existing code of the form: @@ -232,7 +234,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, break; case ACPI_TYPE_METHOD: - /* * Allow scope change to root during execution of module-level * code. Root is typed METHOD during this time. diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c index 4407ff2..b1f8f47 100644 --- a/drivers/acpi/acpica/dswload2.c +++ b/drivers/acpi/acpica/dswload2.c @@ -509,6 +509,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + /* All NAMED_FIELD opcodes must be handled above */ break; } @@ -548,6 +549,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + /* Unknown opcode */ status = AE_OK; @@ -674,6 +676,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) #endif /* ACPI_NO_METHOD_EXECUTION */ default: + /* All NAMED_COMPLEX opcodes must be handled above */ break; } @@ -721,6 +724,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + break; } diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index ae50d6c..c8a1f7d 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -529,7 +529,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) { case ACPI_GPE_DISPATCH_NOTIFY: - /* * Implicit notify. * Dispatch a DEVICE_WAKE notify to the appropriate handler. @@ -582,7 +581,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) break; default: - return_VOID; /* Should never happen */ + + return_VOID; /* Should never happen */ } /* Defer enabling of GPE until all notify handlers are done */ @@ -754,7 +754,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, case ACPI_GPE_DISPATCH_METHOD: case ACPI_GPE_DISPATCH_NOTIFY: - /* * Execute the method associated with the GPE * NOTE: Level-triggered GPEs are cleared after the method completes. @@ -770,7 +769,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, break; default: - /* * No handler or method to run! * 03/2010: This case should no longer be possible. We will not allow diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 72b8f6b..9037f17 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -363,14 +363,17 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, */ switch (name[1]) { case 'L': + type = ACPI_GPE_LEVEL_TRIGGERED; break; case 'E': + type = ACPI_GPE_EDGE_TRIGGERED; break; default: + /* Unknown method type, just ignore it */ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, diff --git a/drivers/acpi/acpica/evhandler.c b/drivers/acpi/acpica/evhandler.c index d4f8311..068af96 100644 --- a/drivers/acpi/acpica/evhandler.c +++ b/drivers/acpi/acpica/evhandler.c @@ -354,36 +354,43 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: + handler = acpi_ex_system_memory_space_handler; setup = acpi_ev_system_memory_region_setup; break; case ACPI_ADR_SPACE_SYSTEM_IO: + handler = acpi_ex_system_io_space_handler; setup = acpi_ev_io_space_region_setup; break; case ACPI_ADR_SPACE_PCI_CONFIG: + handler = acpi_ex_pci_config_space_handler; setup = acpi_ev_pci_config_region_setup; break; case ACPI_ADR_SPACE_CMOS: + handler = acpi_ex_cmos_space_handler; setup = acpi_ev_cmos_region_setup; break; case ACPI_ADR_SPACE_PCI_BAR_TARGET: + handler = acpi_ex_pci_bar_space_handler; setup = acpi_ev_pci_bar_region_setup; break; case ACPI_ADR_SPACE_DATA_TABLE: + handler = acpi_ex_data_table_space_handler; setup = NULL; break; default: + status = AE_BAD_PARAMETER; goto unlock_and_exit; } diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index c986b23..db59fe3 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -78,6 +78,7 @@ u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node) return (TRUE); default: + return (FALSE); } } diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 3bb6167..8354c4f 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -596,7 +596,9 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, break; default: + /* Ignore other objects */ + break; } diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index aff4cc2..7662f1a 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -366,16 +366,19 @@ acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action) switch (action) { case ACPI_GPE_ENABLE: + ACPI_SET_BIT(gpe_register_info->enable_for_wake, (u8)register_bit); break; case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, (u8)register_bit); break; default: + ACPI_ERROR((AE_INFO, "%u, Invalid action", action)); status = AE_BAD_PARAMETER; break; diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 96c9e5f..80cecf8 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -139,6 +139,7 @@ acpi_install_address_space_handler(acpi_handle device, break; default: + break; } diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index a689aac..06d216c 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -480,6 +480,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index d2b9613..69e4a8c 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -99,6 +99,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -117,7 +118,6 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, switch (obj_desc->common.type) { case ACPI_TYPE_STRING: - /* * Convert string to an integer - for most cases, the string must be * hexadecimal as per the ACPI specification. The only exception (as @@ -161,6 +161,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, default: /* No other types can get here */ + break; } @@ -213,7 +214,6 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_OK); case ACPI_TYPE_INTEGER: - /* * Create a new Buffer object. * Need enough space for one integer @@ -233,7 +233,6 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_STRING: - /* * Create a new Buffer object * Size will be the string length @@ -258,6 +257,7 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -304,15 +304,18 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width) switch (data_width) { case 1: + decimal_length = ACPI_MAX8_DECIMAL_DIGITS; break; case 4: + decimal_length = ACPI_MAX32_DECIMAL_DIGITS; break; case 8: default: + decimal_length = ACPI_MAX64_DECIMAL_DIGITS; break; } @@ -546,6 +549,7 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -599,6 +603,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + /* No conversion allowed for these types */ if (destination_type != source_desc->common.type) { @@ -649,6 +654,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + ACPI_ERROR((AE_INFO, "Bad destination type during conversion: 0x%X", destination_type)); @@ -664,6 +670,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + ACPI_ERROR((AE_INFO, "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s", GET_CURRENT_ARG_TYPE(walk_state->op_info-> diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index 26a13f6..269e81d 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -103,7 +103,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) case ACPI_TYPE_BUFFER: case ACPI_TYPE_PACKAGE: case ACPI_TYPE_BUFFER_FIELD: - /* * These types open a new scope, so we need the NS node in order to access * any children. @@ -113,7 +112,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_THERMAL: case ACPI_TYPE_LOCAL_SCOPE: - /* * The new alias has the type ALIAS and points to the original * NS node, not the object itself. @@ -124,7 +122,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_METHOD: - /* * Control method aliases need to be differentiated */ diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c index 7eb853c..81c72a4 100644 --- a/drivers/acpi/acpica/exdebug.c +++ b/drivers/acpi/acpica/exdebug.c @@ -193,6 +193,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, return_VOID; default: + break; } @@ -226,6 +227,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, break; default: + acpi_ex_do_debug_object((source_desc-> reference. node)->object, diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index e5a3c24..c740f24 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -357,6 +357,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc, switch (info->opcode) { case ACPI_EXD_INIT: + break; case ACPI_EXD_TYPE: @@ -718,6 +719,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) break; default: + /* Unknown Type */ acpi_os_printf("Unknown Type %X\n", obj_desc->common.type); diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index 7d4bae7..c2a65aa 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -331,21 +331,25 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, switch (source_desc->common.type) { case ACPI_TYPE_INTEGER: + buffer = &source_desc->integer.value; length = sizeof(source_desc->integer.value); break; case ACPI_TYPE_BUFFER: + buffer = source_desc->buffer.pointer; length = source_desc->buffer.length; break; case ACPI_TYPE_STRING: + buffer = source_desc->string.pointer; length = source_desc->string.length; break; default: + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index c84ee95..7e0afe7 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -446,7 +446,6 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_LOCAL_BANK_FIELD: - /* * Ensure that the bank_value is not beyond the capacity of * the register @@ -488,7 +487,6 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_LOCAL_INDEX_FIELD: - /* * Ensure that the index_value is not beyond the capacity of * the register diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 72a2a13..00bf298 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -105,7 +105,6 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, break; case ACPI_DESC_TYPE_NAMED: - /* * A named reference that has already been resolved to a Node */ @@ -261,20 +260,24 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, */ switch (operand0->common.type) { case ACPI_TYPE_INTEGER: + status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: + status = acpi_ex_convert_to_string(operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: + status = acpi_ex_convert_to_buffer(operand1, &local_operand1); break; default: + ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", operand0->common.type)); status = AE_AML_INTERNAL; @@ -519,6 +522,7 @@ acpi_ex_do_logical_numeric_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } @@ -580,20 +584,24 @@ acpi_ex_do_logical_op(u16 opcode, */ switch (operand0->common.type) { case ACPI_TYPE_INTEGER: + status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: + status = acpi_ex_convert_to_string(operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: + status = acpi_ex_convert_to_buffer(operand1, &local_operand1); break; default: + status = AE_AML_INTERNAL; break; } @@ -636,6 +644,7 @@ acpi_ex_do_logical_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } @@ -703,6 +712,7 @@ acpi_ex_do_logical_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index b60c877..814b4a3 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -327,7 +327,6 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_FROM_BCD_OP: /* from_bcd (BCDValue, Result) */ - /* * The 64-bit ACPI integer can hold 16 4-bit BCD characters * (if table is 32-bit, integer can hold 8 BCD characters) @@ -407,7 +406,6 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_COND_REF_OF_OP: /* cond_ref_of (source_object, Result) */ - /* * This op is a little strange because the internal return value is * different than the return value stored in the result descriptor @@ -442,13 +440,14 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) goto cleanup; default: + /* No other opcodes get here */ + break; } break; case AML_STORE_OP: /* Store (Source, Target) */ - /* * A store operand is typically a number, string, buffer or lvalue * Be careful about deleting the source object, @@ -615,7 +614,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) case AML_DECREMENT_OP: /* Decrement (Operand) */ case AML_INCREMENT_OP: /* Increment (Operand) */ - /* * Create a new integer. Can't just get the base integer and * increment it because it may be an Arg or Field. @@ -682,7 +680,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case AML_TYPE_OP: /* object_type (source_object) */ - /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. For example, we don't @@ -709,7 +706,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case AML_SIZE_OF_OP: /* size_of (source_object) */ - /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. @@ -735,10 +731,12 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) */ switch (type) { case ACPI_TYPE_INTEGER: + value = acpi_gbl_integer_byte_width; break; case ACPI_TYPE_STRING: + value = temp_desc->string.length; break; @@ -759,6 +757,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; default: + ACPI_ERROR((AE_INFO, "Operand must be Buffer/Integer/String/Package - found type %s", acpi_ut_get_type_name(type))); @@ -860,9 +859,11 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_STRING: + break; default: + status = AE_AML_OPERAND_TYPE; goto cleanup; } @@ -923,7 +924,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) */ switch (operand[0]->reference.class) { case ACPI_REFCLASS_INDEX: - /* * The target type for the Index operator must be * either a Buffer or a Package @@ -956,7 +956,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_PACKAGE: - /* * Return the referenced element of the package. We must * add another reference to the referenced object, however. @@ -999,6 +998,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; default: + ACPI_ERROR((AE_INFO, "Unknown class in reference(%p) - 0x%2.2X", operand[0], diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index b0838a4..d5088f7 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -304,7 +304,6 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_TO_STRING_OP: /* to_string (Buffer, Length, Result) (ACPI 2.0) */ - /* * Input object is guaranteed to be a buffer at this point (it may have * been converted.) Copy the raw buffer data to a new object of diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index 2d7491f..37656f1 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -155,7 +155,6 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state) switch (walk_state->opcode) { case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */ - /* * Create the return object. The Source operand is guaranteed to be * either a String or a Buffer, so just use its type. diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c index b76b970..879b6cd 100644 --- a/drivers/acpi/acpica/exoparg6.c +++ b/drivers/acpi/acpica/exoparg6.c @@ -119,7 +119,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MEQ: - /* * True if equal: (P[i] == M) * Change to: (M == P[i]) @@ -133,7 +132,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MLE: - /* * True if less than or equal: (P[i] <= M) (P[i] not_greater than M) * Change to: (M >= P[i]) (M not_less than P[i]) @@ -148,7 +146,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MLT: - /* * True if less than: (P[i] < M) * Change to: (M > P[i]) @@ -162,7 +159,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MGE: - /* * True if greater than or equal: (P[i] >= M) (P[i] not_less than M) * Change to: (M <= P[i]) (M not_greater than P[i]) @@ -177,7 +173,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MGT: - /* * True if greater than: (P[i] > M) * Change to: (M < P[i]) diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 6b728ae..5a58861 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -253,26 +253,31 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, case AML_FIELD_ACCESS_BYTE: case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */ + byte_alignment = 1; bit_length = 8; break; case AML_FIELD_ACCESS_WORD: + byte_alignment = 2; bit_length = 16; break; case AML_FIELD_ACCESS_DWORD: + byte_alignment = 4; bit_length = 32; break; case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */ + byte_alignment = 8; bit_length = 64; break; default: + /* Invalid field access type */ ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access)); @@ -598,7 +603,9 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) break; default: + /* No other types should get here */ + break; } diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 182abaf..303429bb 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -88,22 +88,27 @@ acpi_ex_system_memory_space_handler(u32 function, switch (bit_width) { case 8: + length = 1; break; case 16: + length = 2; break; case 32: + length = 4; break; case 64: + length = 8; break; default: + ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u", bit_width)); return_ACPI_STATUS(AE_AML_OPERAND_VALUE); @@ -214,23 +219,29 @@ acpi_ex_system_memory_space_handler(u32 function, *value = 0; switch (bit_width) { case 8: - *value = (u64) ACPI_GET8(logical_addr_ptr); + + *value = (u64)ACPI_GET8(logical_addr_ptr); break; case 16: - *value = (u64) ACPI_GET16(logical_addr_ptr); + + *value = (u64)ACPI_GET16(logical_addr_ptr); break; case 32: - *value = (u64) ACPI_GET32(logical_addr_ptr); + + *value = (u64)ACPI_GET32(logical_addr_ptr); break; case 64: - *value = (u64) ACPI_GET64(logical_addr_ptr); + + *value = (u64)ACPI_GET64(logical_addr_ptr); break; default: + /* bit_width was already validated */ + break; } break; @@ -239,28 +250,35 @@ acpi_ex_system_memory_space_handler(u32 function, switch (bit_width) { case 8: + ACPI_SET8(logical_addr_ptr, *value); break; case 16: + ACPI_SET16(logical_addr_ptr, *value); break; case 32: + ACPI_SET32(logical_addr_ptr, *value); break; case 64: + ACPI_SET64(logical_addr_ptr, *value); break; default: + /* bit_width was already validated */ + break; } break; default: + status = AE_BAD_PARAMETER; break; } @@ -320,6 +338,7 @@ acpi_ex_system_io_space_handler(u32 function, break; default: + status = AE_BAD_PARAMETER; break; } diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c index 8565b6b..acd34f5 100644 --- a/drivers/acpi/acpica/exresnte.c +++ b/drivers/acpi/acpica/exresnte.c @@ -248,6 +248,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, break; default: + /* No named references are allowed here */ ACPI_ERROR((AE_INFO, diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index e4f9dfb..ac04278 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -156,7 +156,6 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, switch (ref_type) { case ACPI_REFCLASS_LOCAL: case ACPI_REFCLASS_ARG: - /* * Get the local from the method's state info * Note: this increments the local's object reference count @@ -309,6 +308,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, break; default: + break; } @@ -348,10 +348,12 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) { case ACPI_DESC_TYPE_OPERAND: + type = obj_desc->common.type; break; case ACPI_DESC_TYPE_NAMED: + type = ((struct acpi_namespace_node *)obj_desc)->type; obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *) @@ -538,7 +540,9 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, break; default: + /* No change to Type required */ + break; } diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index 9fb9f5e..00e5af7 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -307,7 +307,6 @@ acpi_ex_resolve_operands(u16 opcode, case ARGI_TARGETREF: /* Allows implicit conversion rules before store */ case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */ case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */ - /* * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE * A Namespace Node is OK as-is @@ -326,7 +325,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_DATAREFOBJ: /* Store operator only */ - /* * We don't want to resolve index_op reference objects during * a store because this would be an implicit de_ref_of operation. @@ -343,7 +341,9 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + /* All cases covered above */ + break; } @@ -433,7 +433,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_BUFFER: - /* * Need an operand of type ACPI_TYPE_BUFFER, * But we can implicitly convert from a STRING or INTEGER @@ -459,7 +458,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_STRING: - /* * Need an operand of type ACPI_TYPE_STRING, * But we can implicitly convert from a BUFFER or INTEGER @@ -562,6 +560,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Buffer/String/Package/Reference], found [%s] %p", acpi_ut_get_object_type_name @@ -584,6 +583,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Buffer/String/Package], found [%s] %p", acpi_ut_get_object_type_name @@ -605,6 +605,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Region/Buffer], found [%s] %p", acpi_ut_get_object_type_name diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index 93c6049..2bdba6f 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -114,6 +114,7 @@ acpi_ex_store(union acpi_operand_object *source_desc, switch (dest_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: + break; case ACPI_TYPE_INTEGER: @@ -178,7 +179,6 @@ acpi_ex_store(union acpi_operand_object *source_desc, break; case ACPI_REFCLASS_DEBUG: - /* * Storing to the Debug object causes the value stored to be * displayed and otherwise has no effect -- see ACPI Specification @@ -291,7 +291,6 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, break; case ACPI_TYPE_BUFFER_FIELD: - /* * Store into a Buffer or String (not actually a real buffer_field) * at a location defined by an Index. @@ -447,7 +446,6 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * These target types are all of type Integer/String/Buffer, and * therefore support implicit conversion before the store. diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c index 1cefe77..20d809d 100644 --- a/drivers/acpi/acpica/exstoren.c +++ b/drivers/acpi/acpica/exstoren.c @@ -85,11 +85,9 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, * These cases all require only Integers or values that * can be converted to Integers (Strings or Buffers) */ - case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * Stores into a Field/Region or into a Integer/Buffer/String * are all essentially the same. This case handles the @@ -133,7 +131,6 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, case ACPI_TYPE_LOCAL_ALIAS: case ACPI_TYPE_LOCAL_METHOD_ALIAS: - /* * All aliases should have been resolved earlier, during the * operand resolution phase. @@ -144,7 +141,6 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, case ACPI_TYPE_PACKAGE: default: - /* * All other types than Alias and the various Fields come here, * including the untyped case - ACPI_TYPE_ANY. diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index 579c3a5..3d36df8 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -108,7 +108,6 @@ acpi_status acpi_hw_set_mode(u32 mode) break; case ACPI_SYS_MODE_LEGACY: - /* * BIOS should clear all fixed status bits and restore fixed event * enable bits to default @@ -120,6 +119,7 @@ acpi_status acpi_hw_set_mode(u32 mode) break; default: + return_ACPI_STATUS(AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 20d02e9..9654050 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -127,14 +127,17 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) /*lint -fallthrough */ case ACPI_GPE_ENABLE: + ACPI_SET_BIT(enable_mask, register_bit); break; case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(enable_mask, register_bit); break; default: + ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action)); return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 083d655..8d2e866 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -419,6 +419,7 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) break; default: + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; @@ -491,7 +492,6 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ - /* * Perform a read first to preserve certain bits (per ACPI spec) * Note: This includes SCI_EN, we never want to change this bit @@ -520,7 +520,6 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - /* * For control registers, all reserved bits must be preserved, * as per the ACPI spec. @@ -555,6 +554,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; default: + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index f4224e6..5ee7a814 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -528,10 +528,12 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) elements = info->return_object->package.elements; switch (info->return_object->package.count) { case 0: + status = AE_AML_PACKAGE_LIMIT; break; case 1: + if (elements[0]->common.type != ACPI_TYPE_INTEGER) { status = AE_AML_OPERAND_TYPE; break; @@ -545,6 +547,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) case 2: default: + if ((elements[0]->common.type != ACPI_TYPE_INTEGER) || (elements[1]->common.type != ACPI_TYPE_INTEGER)) { status = AE_AML_OPERAND_TYPE; diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 35eebda..111849c2 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -314,20 +314,24 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) switch (sleep_state) { case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; break; case ACPI_STATE_S1: case ACPI_STATE_S2: case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; break; case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; break; default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ break; } diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 8769cf8..c5316e5 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -151,6 +151,7 @@ acpi_status acpi_ns_root_initialize(void) */ switch (init_val->type) { case ACPI_TYPE_METHOD: + obj_desc->method.param_count = (u8) ACPI_TO_INTEGER(val); obj_desc->common.flags |= AOPOBJ_DATA_VALID; diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c index 8f79a9d..acd2964 100644 --- a/drivers/acpi/acpica/nsconvert.c +++ b/drivers/acpi/acpica/nsconvert.c @@ -103,6 +103,7 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } @@ -191,6 +192,7 @@ acpi_ns_convert_to_string(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } @@ -294,6 +296,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index ce6e973..7418c77 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -244,10 +244,12 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, case ACPI_TYPE_BUFFER: case ACPI_TYPE_STRING: case ACPI_TYPE_METHOD: + acpi_os_printf(""); break; default: + break; } @@ -433,6 +435,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, break; default: + break; } break; @@ -567,32 +570,39 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, goto cleanup; case ACPI_TYPE_BUFFER_FIELD: + obj_desc = (union acpi_operand_object *)obj_desc->buffer_field. buffer_obj; break; case ACPI_TYPE_PACKAGE: + obj_desc = (void *)obj_desc->package.elements; break; case ACPI_TYPE_METHOD: + obj_desc = (void *)obj_desc->method.aml_start; break; case ACPI_TYPE_LOCAL_REGION_FIELD: + obj_desc = (void *)obj_desc->field.region_obj; break; case ACPI_TYPE_LOCAL_BANK_FIELD: + obj_desc = (void *)obj_desc->bank_field.region_obj; break; case ACPI_TYPE_LOCAL_INDEX_FIELD: + obj_desc = (void *)obj_desc->index_field.index_obj; break; default: + goto cleanup; } diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 23e426f..dd2ceae 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -266,28 +266,34 @@ acpi_ns_init_one_object(acpi_handle obj_handle, switch (type) { case ACPI_TYPE_REGION: + info->op_region_count++; break; case ACPI_TYPE_BUFFER_FIELD: + info->field_count++; break; case ACPI_TYPE_LOCAL_BANK_FIELD: + info->field_count++; break; case ACPI_TYPE_BUFFER: + info->buffer_count++; break; case ACPI_TYPE_PACKAGE: + info->package_count++; break; default: /* No init required, just exit now */ + return (AE_OK); } @@ -337,7 +343,9 @@ acpi_ns_init_one_object(acpi_handle obj_handle, break; default: + /* No other types can get here */ + break; } @@ -416,6 +424,7 @@ acpi_ns_find_ini_methods(acpi_handle obj_handle, break; default: + break; } diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 5c83a8b..600268d 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -344,26 +344,32 @@ static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object) switch (return_object->common.type) { case ACPI_TYPE_INTEGER: + return_btype = ACPI_RTYPE_INTEGER; break; case ACPI_TYPE_BUFFER: + return_btype = ACPI_RTYPE_BUFFER; break; case ACPI_TYPE_STRING: + return_btype = ACPI_RTYPE_STRING; break; case ACPI_TYPE_PACKAGE: + return_btype = ACPI_RTYPE_PACKAGE; break; case ACPI_TYPE_LOCAL_REFERENCE: + return_btype = ACPI_RTYPE_REFERENCE; break; default: + /* Not one of the supported objects, must be incorrect */ return_btype = ACPI_RTYPE_ANY; diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c index ab2a3f4..6d55cef 100644 --- a/drivers/acpi/acpica/nsprepkg.c +++ b/drivers/acpi/acpica/nsprepkg.c @@ -136,7 +136,6 @@ acpi_ns_check_package(struct acpi_evaluate_info *info, */ switch (package->ret_info.type) { case ACPI_PTYPE1_FIXED: - /* * The package count is fixed and there are no sub-packages * @@ -169,7 +168,6 @@ acpi_ns_check_package(struct acpi_evaluate_info *info, break; case ACPI_PTYPE1_VAR: - /* * The package count is variable, there are no sub-packages, and all * elements must be of the same type @@ -186,7 +184,6 @@ acpi_ns_check_package(struct acpi_evaluate_info *info, break; case ACPI_PTYPE1_OPTION: - /* * The package count is variable, there are no sub-packages. There are * a fixed number of required elements, and a variable number of @@ -284,7 +281,6 @@ acpi_ns_check_package(struct acpi_evaluate_info *info, case ACPI_PTYPE2_MIN: case ACPI_PTYPE2_COUNT: case ACPI_PTYPE2_FIX_VAR: - /* * These types all return a single Package that consists of a * variable number of sub-Packages. @@ -500,7 +496,6 @@ acpi_ns_check_package_list(struct acpi_evaluate_info *info, break; case ACPI_PTYPE2_COUNT: - /* * First element is the (Integer) count of elements, including * the count field (the ACPI name is num_elements) diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 89caef0..f8e71ea 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -480,6 +480,7 @@ acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, case ACPI_PTYPE2_MIN: case ACPI_PTYPE2_REV_FIXED: case ACPI_PTYPE2_FIX_VAR: + break; default: diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 39acc4e..daac8da 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -320,6 +320,7 @@ acpi_ns_repair_FDE(struct acpi_evaluate_info *info, break; default: + return (AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index 2808586..08c0b5b 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -419,10 +419,12 @@ acpi_ns_externalize_name(u32 internal_name_length, switch (internal_name[0]) { case AML_ROOT_PREFIX: + prefix_length = 1; break; case AML_PARENT_PREFIX: + for (i = 0; i < internal_name_length; i++) { if (ACPI_IS_PARENT_PREFIX(internal_name[i])) { prefix_length = i + 1; @@ -438,6 +440,7 @@ acpi_ns_externalize_name(u32 internal_name_length, break; default: + break; } diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index 82bec40..f553cfd 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -511,6 +511,7 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info) break; default: + return; } diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 9f25a3d..91a5a69 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -629,24 +629,28 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state switch (opcode) { case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ + buffer_length = ACPI_GET8(parser_state->aml); parser_state->aml += 1; break; case AML_WORD_OP: /* AML_WORDDATA_ARG */ + buffer_length = ACPI_GET16(parser_state->aml); parser_state->aml += 2; break; case AML_DWORD_OP: /* AML_DWORDATA_ARG */ + buffer_length = ACPI_GET32(parser_state->aml); parser_state->aml += 4; break; default: + buffer_length = 0; break; } diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index 63c4554..065b44a 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -164,7 +164,6 @@ acpi_ps_get_arguments(struct acpi_walk_state *walk_state, case AML_IF_OP: case AML_ELSE_OP: case AML_WHILE_OP: - /* * Currently supported module-level opcodes are: * IF/ELSE/WHILE. These appear to be the most common, @@ -289,6 +288,7 @@ acpi_ps_get_arguments(struct acpi_walk_state *walk_state, default: /* No action for all other opcodes */ + break; } diff --git a/drivers/acpi/acpica/psobject.c b/drivers/acpi/acpica/psobject.c index 12c4028..95dc608 100644 --- a/drivers/acpi/acpica/psobject.c +++ b/drivers/acpi/acpica/psobject.c @@ -402,6 +402,7 @@ acpi_ps_complete_op(struct acpi_walk_state *walk_state, switch (status) { case AE_OK: + break; case AE_CTRL_TRANSFER: diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index abc4c48..86198a9 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -176,10 +176,10 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, switch (parent_info->class) { case AML_CLASS_CONTROL: + break; case AML_CLASS_CREATE: - /* * These opcodes contain term_arg operands. The current * op must be replaced by a placeholder return op @@ -192,7 +192,6 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, break; case AML_CLASS_NAMED_OBJECT: - /* * These opcodes contain term_arg operands. The current * op must be replaced by a placeholder return op diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c index c1934bf..877dc0d 100644 --- a/drivers/acpi/acpica/pstree.c +++ b/drivers/acpi/acpica/pstree.c @@ -308,7 +308,9 @@ union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op) break; default: + /* All others have no children */ + break; } diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 72077fa..608ebb5 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -352,6 +352,7 @@ acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed) break; default: + break; } @@ -539,6 +540,7 @@ acpi_rs_get_list_length(u8 * aml_buffer, break; default: + break; } diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c index b5fc0db..8a2d498 100644 --- a/drivers/acpi/acpica/rsdump.c +++ b/drivers/acpi/acpica/rsdump.c @@ -120,17 +120,20 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) /* Strings */ case ACPI_RSD_LITERAL: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table->pointer)); break; case ACPI_RSD_STRING: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, target)); break; /* Data items, 8/16/32/64 bit */ case ACPI_RSD_UINT8: + if (table->pointer) { acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> @@ -142,20 +145,24 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_UINT16: + acpi_rs_out_integer16(name, ACPI_GET16(target)); break; case ACPI_RSD_UINT32: + acpi_rs_out_integer32(name, ACPI_GET32(target)); break; case ACPI_RSD_UINT64: + acpi_rs_out_integer64(name, ACPI_GET64(target)); break; /* Flags: 1-bit and 2-bit flags supported */ case ACPI_RSD_1BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -163,6 +170,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_2BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -170,6 +178,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_3BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -258,6 +267,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; default: + acpi_os_printf("**** Invalid table opcode [%X] ****\n", table->opcode); return; diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c index d5bf05a..80d1299 100644 --- a/drivers/acpi/acpica/rsmisc.c +++ b/drivers/acpi/acpica/rsmisc.c @@ -194,7 +194,6 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, break; case ACPI_RSC_COUNT_GPIO_RES: - /* * Vendor data is optional (length/offset may both be zero) * Examine vendor data length field first @@ -410,12 +409,14 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, */ switch (info->resource_offset) { case ACPI_RSC_COMPARE_AML_LENGTH: + if (aml_resource_length != info->value) { goto exit; } break; case ACPI_RSC_COMPARE_VALUE: + if (ACPI_GET8(source) != info->value) { goto exit; } diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 59bdf37..480b6b4 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -147,6 +147,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) case ACPI_RSC_MOVE_GPIO_RES: case ACPI_RSC_MOVE_SERIAL_VEN: case ACPI_RSC_MOVE_SERIAL_RES: + ACPI_MEMCPY(destination, source, item_count); return; @@ -157,21 +158,25 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) */ case ACPI_RSC_MOVE16: case ACPI_RSC_MOVE_GPIO_PIN: + ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i], &ACPI_CAST_PTR(u16, source)[i]); break; case ACPI_RSC_MOVE32: + ACPI_MOVE_32_TO_32(&ACPI_CAST_PTR(u32, destination)[i], &ACPI_CAST_PTR(u32, source)[i]); break; case ACPI_RSC_MOVE64: + ACPI_MOVE_64_TO_64(&ACPI_CAST_PTR(u64, destination)[i], &ACPI_CAST_PTR(u64, source)[i]); break; default: + return; } } diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index c0e5d2d..94e3517 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -402,6 +402,7 @@ acpi_resource_to_address64(struct acpi_resource *resource, break; default: + return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index e57cd38..a04e54d 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -471,15 +471,19 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) } switch (table_desc->flags & ACPI_TABLE_ORIGIN_MASK) { case ACPI_TABLE_ORIGIN_MAPPED: + acpi_os_unmap_memory(table_desc->pointer, table_desc->length); break; + case ACPI_TABLE_ORIGIN_ALLOCATED: + ACPI_FREE(table_desc->pointer); break; /* Not mapped or allocated, there is nothing we can do */ default: + return; } diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index e4c9291..1731c27 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -178,7 +178,6 @@ acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object, switch (internal_object->reference.class) { case ACPI_REFCLASS_NAME: - /* * For namepath, return the object handle ("reference") * We are referring to the namespace node @@ -264,7 +263,6 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, switch (object_type) { case ACPI_COPY_TYPE_SIMPLE: - /* * This is a simple or null object */ @@ -278,7 +276,6 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, break; case ACPI_COPY_TYPE_PACKAGE: - /* * Build the package object */ @@ -304,6 +301,7 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, break; default: + return (AE_BAD_PARAMETER); } @@ -481,6 +479,7 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, return_ACPI_STATUS(AE_OK); default: + /* All other types are not supported */ ACPI_ERROR((AE_INFO, @@ -544,7 +543,9 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, break; default: + /* Other types can't get here */ + break; } @@ -800,7 +801,9 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc, break; default: + /* Nothing to do for other simple objects */ + break; } @@ -868,7 +871,6 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, break; case ACPI_COPY_TYPE_PACKAGE: - /* * This object is a package - go down another nesting level * Create and build the package object @@ -891,6 +893,7 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, break; default: + return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index 29b9302..d6b33f2 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -303,6 +303,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) break; default: + break; } @@ -508,7 +509,6 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_POWER: case ACPI_TYPE_THERMAL: - /* * Update the notify objects for these types (if present) * Two lists, system and device notify handlers. @@ -623,6 +623,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) case ACPI_TYPE_REGION: default: + break; /* No subobjects for all other types */ } diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 9d68029..ee83adb 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -123,22 +123,27 @@ acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, switch ((info->return_object)->common.type) { case ACPI_TYPE_INTEGER: + return_btype = ACPI_BTYPE_INTEGER; break; case ACPI_TYPE_BUFFER: + return_btype = ACPI_BTYPE_BUFFER; break; case ACPI_TYPE_STRING: + return_btype = ACPI_BTYPE_STRING; break; case ACPI_TYPE_PACKAGE: + return_btype = ACPI_BTYPE_PACKAGE; break; default: + return_btype = 0; break; } diff --git a/drivers/acpi/acpica/utexcep.c b/drivers/acpi/acpica/utexcep.c index b543a14..ff6d9e8 100644 --- a/drivers/acpi/acpica/utexcep.c +++ b/drivers/acpi/acpica/utexcep.c @@ -146,6 +146,7 @@ const struct acpi_exception_info *acpi_ut_validate_exception(acpi_status status) break; default: + break; } diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c index 43a170a..fa69071 100644 --- a/drivers/acpi/acpica/utids.c +++ b/drivers/acpi/acpica/utids.c @@ -341,14 +341,17 @@ acpi_ut_execute_CID(struct acpi_namespace_node *device_node, switch (cid_objects[i]->common.type) { case ACPI_TYPE_INTEGER: + string_area_size += ACPI_EISAID_STRING_SIZE; break; case ACPI_TYPE_STRING: + string_area_size += cid_objects[i]->string.length + 1; break; default: + status = AE_TYPE; goto cleanup; } diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index 785fdd0..02f9101 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -382,10 +382,12 @@ acpi_ut_display_init_pathname(u8 type, switch (type) { case ACPI_TYPE_METHOD: + acpi_os_printf("Executing "); break; default: + acpi_os_printf("Initializing "); break; } diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index 1099f5c..aa61f66 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -129,6 +129,7 @@ union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char break; default: + /* All others have no secondary object */ break; } @@ -353,6 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object) return (TRUE); default: + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%p is not not an ACPI operand obj [%s]\n", object, acpi_ut_get_descriptor_name(object))); @@ -509,7 +511,6 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, switch (internal_object->reference.class) { case ACPI_REFCLASS_NAME: - /* * Get the actual length of the full pathname to this object. * The reference will be converted to the pathname to the object @@ -525,7 +526,6 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, break; default: - /* * No other reference opcodes are supported. * Notably, Locals and Args are not supported, but this may be @@ -585,7 +585,6 @@ acpi_ut_get_element_length(u8 object_type, switch (object_type) { case ACPI_COPY_TYPE_SIMPLE: - /* * Simple object - just get the size (Null object/entry is handled * here also) and sum it into the running package length diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c index b3e36a8..31a06a1 100644 --- a/drivers/acpi/acpica/utstring.c +++ b/drivers/acpi/acpica/utstring.c @@ -186,10 +186,13 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) switch (base) { case ACPI_ANY_BASE: case 16: + break; default: + /* Invalid Base */ + return_ACPI_STATUS(AE_BAD_PARAMETER); } @@ -355,36 +358,44 @@ void acpi_ut_print_string(char *string, u8 max_length) switch (string[i]) { case 0x07: + acpi_os_printf("\\a"); /* BELL */ break; case 0x08: + acpi_os_printf("\\b"); /* BACKSPACE */ break; case 0x0C: + acpi_os_printf("\\f"); /* FORMFEED */ break; case 0x0A: + acpi_os_printf("\\n"); /* LINEFEED */ break; case 0x0D: + acpi_os_printf("\\r"); /* CARRIAGE RETURN */ break; case 0x09: + acpi_os_printf("\\t"); /* HORIZONTAL TAB */ break; case 0x0B: + acpi_os_printf("\\v"); /* VERTICAL TAB */ break; case '\'': /* Single Quote */ case '\"': /* Double Quote */ case '\\': /* Backslash */ + acpi_os_printf("\\%c", (int)string[i]); break; diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c index 62774c7..160f13f 100644 --- a/drivers/acpi/acpica/uttrack.c +++ b/drivers/acpi/acpica/uttrack.c @@ -603,6 +603,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) switch (ACPI_GET_DESCRIPTOR_TYPE (descriptor)) { case ACPI_DESC_TYPE_OPERAND: + if (element->size == sizeof(union acpi_operand_object)) @@ -613,6 +614,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_PARSER: + if (element->size == sizeof(union acpi_parse_object)) { @@ -622,6 +624,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_NAMED: + if (element->size == sizeof(struct acpi_namespace_node)) @@ -632,6 +635,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; default: + break; } @@ -639,6 +643,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) switch (descriptor_type) { case ACPI_DESC_TYPE_OPERAND: + acpi_os_printf ("%12.12s RefCount 0x%04X\n", acpi_ut_get_type_name @@ -649,6 +654,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_PARSER: + acpi_os_printf ("AmlOpcode 0x%04hX\n", descriptor->op.asl. @@ -656,6 +662,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_NAMED: + acpi_os_printf("%4.4s\n", acpi_ut_get_node_name (&descriptor-> @@ -663,6 +670,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; default: + acpi_os_printf("\n"); break; } -- cgit v0.10.2 From b75dd2977fc3c5848f739681fc799f27b1322e44 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 8 Jun 2013 00:58:48 +0000 Subject: ACPICA: Add option to disable loading of SSDTs from the RSDT/XSDT Optionally do not load any SSDTs from the RSDT/XSDT during initialization. This can be useful for overriding SSDTs using DSDT overriding, thus useful for debugging ACPI problems on some machines. Lv Zheng. ACPICA BZ 1005. References: https://bugs.acpica.org/show_bug.cgi?id=1005 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 0716092..b8d3811 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -132,6 +132,12 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE); */ u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_auto_repair, FALSE); +/* + * Optionally do not load any SSDTs from the RSDT/XSDT during initialization. + * This can be useful for debugging ACPI problems on some machines. + */ +u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_ssdt_table_load, FALSE); + /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */ struct acpi_table_fadt acpi_gbl_FADT; diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c index 67e046e..0ba9e32 100644 --- a/drivers/acpi/acpica/tbxfload.c +++ b/drivers/acpi/acpica/tbxfload.c @@ -53,8 +53,6 @@ ACPI_MODULE_NAME("tbxfload") /* Local prototypes */ static acpi_status acpi_tb_load_namespace(void); -static int no_auto_ssdt; - /******************************************************************************* * * FUNCTION: acpi_load_tables @@ -180,8 +178,16 @@ static acpi_status acpi_tb_load_namespace(void) continue; } - if (no_auto_ssdt) { - printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n"); + /* + * Optionally do not load any SSDTs from the RSDT/XSDT. This can + * be useful for debugging ACPI problems on some machines. + */ + if (acpi_gbl_disable_ssdt_table_load) { + ACPI_INFO((AE_INFO, "Ignoring %4.4s at %p", + acpi_gbl_root_table_list.tables[i].signature. + ascii, ACPI_CAST_PTR(void, + acpi_gbl_root_table_list. + tables[i].address))); continue; } @@ -376,14 +382,3 @@ acpi_status acpi_unload_parent_table(acpi_handle object) } ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) - -static int __init acpi_no_auto_ssdt_setup(char *s) { - - printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n"); - - no_auto_ssdt = 1; - - return 1; -} - -__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e721863..da6b663 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1715,6 +1715,17 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) } #endif +static int __init acpi_no_auto_ssdt_setup(char *s) +{ + printk(KERN_NOTICE PREFIX "SSDT auto-load disabled\n"); + + acpi_gbl_disable_ssdt_table_load = TRUE; + + return 1; +} + +__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); + acpi_status __init acpi_os_initialize(void) { acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 1561264..5d9bf46 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -80,6 +80,7 @@ extern bool acpi_gbl_enable_aml_debug_object; extern u8 acpi_gbl_copy_dsdt_locally; extern u8 acpi_gbl_truncate_io_addresses; extern u8 acpi_gbl_disable_auto_repair; +extern u8 acpi_gbl_disable_ssdt_table_load; /* * Hardware-reduced prototypes. All interfaces that use these macros will -- cgit v0.10.2 From 42f47869c6a73a6893c998725365b587b0311f9a Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Sat, 8 Jun 2013 00:59:02 +0000 Subject: ACPICA: Split table print utilities to a new a separate file Improves configurability of ACPICA. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 987bf41..4383040 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -138,6 +138,7 @@ acpi-y += \ tbfadt.o \ tbfind.o \ tbinstal.o \ + tbprint.o \ tbutils.o \ tbxface.o \ tbxfload.o \ diff --git a/drivers/acpi/acpica/tbprint.c b/drivers/acpi/acpica/tbprint.c new file mode 100644 index 0000000..dc963f8 --- /dev/null +++ b/drivers/acpi/acpica/tbprint.c @@ -0,0 +1,237 @@ +/****************************************************************************** + * + * Module Name: tbprint - Table output utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "actables.h" + +#define _COMPONENT ACPI_TABLES +ACPI_MODULE_NAME("tbprint") + +/* Local prototypes */ +static void acpi_tb_fix_string(char *string, acpi_size length); + +static void +acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, + struct acpi_table_header *header); + +/******************************************************************************* + * + * FUNCTION: acpi_tb_fix_string + * + * PARAMETERS: string - String to be repaired + * length - Maximum length + * + * RETURN: None + * + * DESCRIPTION: Replace every non-printable or non-ascii byte in the string + * with a question mark '?'. + * + ******************************************************************************/ + +static void acpi_tb_fix_string(char *string, acpi_size length) +{ + + while (length && *string) { + if (!ACPI_IS_PRINT(*string)) { + *string = '?'; + } + string++; + length--; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_cleanup_table_header + * + * PARAMETERS: out_header - Where the cleaned header is returned + * header - Input ACPI table header + * + * RETURN: Returns the cleaned header in out_header + * + * DESCRIPTION: Copy the table header and ensure that all "string" fields in + * the header consist of printable characters. + * + ******************************************************************************/ + +static void +acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, + struct acpi_table_header *header) +{ + + ACPI_MEMCPY(out_header, header, sizeof(struct acpi_table_header)); + + acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE); + acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE); + acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE); + acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_print_table_header + * + * PARAMETERS: address - Table physical address + * header - Table header + * + * RETURN: None + * + * DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP. + * + ******************************************************************************/ + +void +acpi_tb_print_table_header(acpi_physical_address address, + struct acpi_table_header *header) +{ + struct acpi_table_header local_header; + + /* + * The reason that the Address is cast to a void pointer is so that we + * can use %p which will work properly on both 32-bit and 64-bit hosts. + */ + if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { + + /* FACS only has signature and length fields */ + + ACPI_INFO((AE_INFO, "%4.4s %p %05X", + header->signature, ACPI_CAST_PTR(void, address), + header->length)); + } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) { + + /* RSDP has no common fields */ + + ACPI_MEMCPY(local_header.oem_id, + ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->oem_id, ACPI_OEM_ID_SIZE); + acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE); + + ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)", + ACPI_CAST_PTR(void, address), + (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> + revision > + 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->length : 20, + ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->revision, + local_header.oem_id)); + } else { + /* Standard ACPI table with full common header */ + + acpi_tb_cleanup_table_header(&local_header, header); + + ACPI_INFO((AE_INFO, + "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)", + local_header.signature, ACPI_CAST_PTR(void, address), + local_header.length, local_header.revision, + local_header.oem_id, local_header.oem_table_id, + local_header.oem_revision, + local_header.asl_compiler_id, + local_header.asl_compiler_revision)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_validate_checksum + * + * PARAMETERS: table - ACPI table to verify + * length - Length of entire table + * + * RETURN: Status + * + * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns + * exception on bad checksum. + * + ******************************************************************************/ + +acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) +{ + u8 checksum; + + /* Compute the checksum on the table */ + + checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length); + + /* Checksum ok? (should be zero) */ + + if (checksum) { + ACPI_BIOS_WARNING((AE_INFO, + "Incorrect checksum in table [%4.4s] - 0x%2.2X, " + "should be 0x%2.2X", + table->signature, table->checksum, + (u8)(table->checksum - checksum))); + +#if (ACPI_CHECKSUM_ABORT) + return (AE_BAD_CHECKSUM); +#endif + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_checksum + * + * PARAMETERS: buffer - Pointer to memory region to be checked + * length - Length of this memory region + * + * RETURN: Checksum (u8) + * + * DESCRIPTION: Calculates circular checksum of memory region. + * + ******************************************************************************/ + +u8 acpi_tb_checksum(u8 *buffer, u32 length) +{ + u8 sum = 0; + u8 *end = buffer + length; + + while (buffer < end) { + sum = (u8)(sum + *(buffer++)); + } + + return (sum); +} diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index ce3d5db..bffdfc7 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: tbutils - table utilities + * Module Name: tbutils - ACPI Table utilities * *****************************************************************************/ @@ -49,12 +49,6 @@ ACPI_MODULE_NAME("tbutils") /* Local prototypes */ -static void acpi_tb_fix_string(char *string, acpi_size length); - -static void -acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, - struct acpi_table_header *header); - static acpi_physical_address acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size); @@ -176,189 +170,6 @@ u8 acpi_tb_tables_loaded(void) /******************************************************************************* * - * FUNCTION: acpi_tb_fix_string - * - * PARAMETERS: string - String to be repaired - * length - Maximum length - * - * RETURN: None - * - * DESCRIPTION: Replace every non-printable or non-ascii byte in the string - * with a question mark '?'. - * - ******************************************************************************/ - -static void acpi_tb_fix_string(char *string, acpi_size length) -{ - - while (length && *string) { - if (!ACPI_IS_PRINT(*string)) { - *string = '?'; - } - string++; - length--; - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_cleanup_table_header - * - * PARAMETERS: out_header - Where the cleaned header is returned - * header - Input ACPI table header - * - * RETURN: Returns the cleaned header in out_header - * - * DESCRIPTION: Copy the table header and ensure that all "string" fields in - * the header consist of printable characters. - * - ******************************************************************************/ - -static void -acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, - struct acpi_table_header *header) -{ - - ACPI_MEMCPY(out_header, header, sizeof(struct acpi_table_header)); - - acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE); - acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE); - acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE); - acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_print_table_header - * - * PARAMETERS: address - Table physical address - * header - Table header - * - * RETURN: None - * - * DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP. - * - ******************************************************************************/ - -void -acpi_tb_print_table_header(acpi_physical_address address, - struct acpi_table_header *header) -{ - struct acpi_table_header local_header; - - /* - * The reason that the Address is cast to a void pointer is so that we - * can use %p which will work properly on both 32-bit and 64-bit hosts. - */ - if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { - - /* FACS only has signature and length fields */ - - ACPI_INFO((AE_INFO, "%4.4s %p %05X", - header->signature, ACPI_CAST_PTR(void, address), - header->length)); - } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) { - - /* RSDP has no common fields */ - - ACPI_MEMCPY(local_header.oem_id, - ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->oem_id, ACPI_OEM_ID_SIZE); - acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE); - - ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)", - ACPI_CAST_PTR (void, address), - (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> - revision > - 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->length : 20, - ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->revision, - local_header.oem_id)); - } else { - /* Standard ACPI table with full common header */ - - acpi_tb_cleanup_table_header(&local_header, header); - - ACPI_INFO((AE_INFO, - "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)", - local_header.signature, ACPI_CAST_PTR(void, address), - local_header.length, local_header.revision, - local_header.oem_id, local_header.oem_table_id, - local_header.oem_revision, - local_header.asl_compiler_id, - local_header.asl_compiler_revision)); - - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_validate_checksum - * - * PARAMETERS: table - ACPI table to verify - * length - Length of entire table - * - * RETURN: Status - * - * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns - * exception on bad checksum. - * - ******************************************************************************/ - -acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) -{ - u8 checksum; - - /* Compute the checksum on the table */ - - checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length); - - /* Checksum ok? (should be zero) */ - - if (checksum) { - ACPI_BIOS_WARNING((AE_INFO, - "Incorrect checksum in table [%4.4s] - 0x%2.2X, " - "should be 0x%2.2X", - table->signature, table->checksum, - (u8)(table->checksum - checksum))); - -#if (ACPI_CHECKSUM_ABORT) - - return (AE_BAD_CHECKSUM); -#endif - } - - return (AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_checksum - * - * PARAMETERS: buffer - Pointer to memory region to be checked - * length - Length of this memory region - * - * RETURN: Checksum (u8) - * - * DESCRIPTION: Calculates circular checksum of memory region. - * - ******************************************************************************/ - -u8 acpi_tb_checksum(u8 *buffer, u32 length) -{ - u8 sum = 0; - u8 *end = buffer + length; - - while (buffer < end) { - sum = (u8) (sum + *(buffer++)); - } - - return (sum); -} - -/******************************************************************************* - * * FUNCTION: acpi_tb_check_dsdt_header * * PARAMETERS: None -- cgit v0.10.2 From 7cec7048fe22e3e92389da2cd67098f6c4284e7f Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 8 Jun 2013 00:59:18 +0000 Subject: ACPICA: Do not use extended sleep registers unless HW-reduced bit is set Previous implementation incorrectly used the ACPI 5.0 extended sleep registers if they were simply populated. This caused problems on some non-HW-reduced machines. As per the ACPI spec, they should only be used if the HW-reduced bit is set. Lv Zheng, ACPICA BZ 1020. References: https://bugzilla.kernel.org/show_bug.cgi?id=54181 References: https://bugs.acpica.org/show_bug.cgi?id=1020 Reported-by: Daniel Rowe Bisected-by: Brint E. Kriebel Cc: 3.4+ Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 111849c2..f2e669db 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -240,12 +240,14 @@ static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) &acpi_sleep_dispatch[function_id]; #if (!ACPI_REDUCED_HARDWARE) - /* * If the Hardware Reduced flag is set (from the FADT), we must - * use the extended sleep registers + * use the extended sleep registers (FADT). Note: As per the ACPI + * specification, these extended registers are to be used for HW-reduced + * platforms only. They are not general-purpose replacements for the + * legacy PM register sleep support. */ - if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + if (acpi_gbl_reduced_hardware) { status = sleep_functions->extended_function(sleep_state); } else { /* Legacy sleep */ -- cgit v0.10.2 From de8e7db74a98124406b72a528f4c79766e08b410 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Sat, 8 Jun 2013 00:59:44 +0000 Subject: ACPICA: Update interface to acpi_ut_valid_acpi_name() Clean up the interface by making the input argument a char * string instead of a UINT32 name. This is easier to use for all callers and eliminates casting to *(UINT32*) Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index d552036..3c76ede 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -620,7 +620,7 @@ void acpi_ut_print_string(char *string, u8 max_length); void ut_convert_backslashes(char *pathname); -u8 acpi_ut_valid_acpi_name(u32 name); +u8 acpi_ut_valid_acpi_name(char *name); u8 acpi_ut_valid_acpi_char(char character, u32 position); diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index a04e54d..42a13c0 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -141,8 +141,7 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) ACPI_BIOS_ERROR((AE_INFO, "Table has invalid signature [%4.4s] (0x%8.8X), " "must be SSDT or OEMx", - acpi_ut_valid_acpi_name(*(u32 *)table_desc-> - pointer-> + acpi_ut_valid_acpi_name(table_desc->pointer-> signature) ? table_desc->pointer->signature : "????", *(u32 *)table_desc->pointer->signature)); diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c index 31a06a1..c53759b 100644 --- a/drivers/acpi/acpica/utstring.c +++ b/drivers/acpi/acpica/utstring.c @@ -462,7 +462,8 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * * FUNCTION: acpi_ut_valid_acpi_name * - * PARAMETERS: name - The name to be examined + * PARAMETERS: name - The name to be examined. Does not have to + * be NULL terminated string. * * RETURN: TRUE if the name is valid, FALSE otherwise * @@ -473,15 +474,14 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * ******************************************************************************/ -u8 acpi_ut_valid_acpi_name(u32 name) +u8 acpi_ut_valid_acpi_name(char *name) { u32 i; ACPI_FUNCTION_ENTRY(); for (i = 0; i < ACPI_NAME_SIZE; i++) { - if (!acpi_ut_valid_acpi_char - ((ACPI_CAST_PTR(char, &name))[i], i)) { + if (!acpi_ut_valid_acpi_char(name[i], i)) { return (FALSE); } } -- cgit v0.10.2 From 9dae7bb0459332cc8fe8e29880cd158807c03d6b Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Sat, 8 Jun 2013 00:59:55 +0000 Subject: ACPICA: ACPICA Termination: Delete global lock pending lock Add deletion of this lock, used for the global lock. ACPICA BZ 1012. Tomasz Nowicki References: https://bugs.acpica.org/show_bug.cgi?id=1012 Signed-off-by: Tomasz Nowicki Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Reviewed-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index a621481..fdb0a76 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -128,6 +128,7 @@ acpi_status acpi_ev_remove_global_lock_handler(void) status = acpi_remove_fixed_event_handler(ACPI_EVENT_GLOBAL, acpi_ev_global_lock_handler); + acpi_os_delete_lock(acpi_gbl_global_lock_pending_lock); return_ACPI_STATUS(status); } -- cgit v0.10.2 From b739f106cb6385b83bac41e1f417c4e9347171a4 Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Sat, 8 Jun 2013 01:00:07 +0000 Subject: ACPICA: Fix possible memory leak in GPE init error path Some GPE blocks were not deleted. ACPICA BZ 1018. Tomasz Nowicki References: https://bugs.acpica.org/show_bug.cgi?id=1018 Signed-off-by: Tomasz Nowicki Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Reviewed-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index a2d688b..c1aa1ed 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -382,6 +382,8 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, status = acpi_ev_install_gpe_block(gpe_block, interrupt_number); if (ACPI_FAILURE(status)) { + ACPI_FREE(gpe_block->register_info); + ACPI_FREE(gpe_block->event_info); ACPI_FREE(gpe_block); return_ACPI_STATUS(status); } -- cgit v0.10.2 From 64f3af5fd1405b6856ef6eef555e72d7ea67ee14 Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Sat, 8 Jun 2013 01:00:23 +0000 Subject: ACPICA: Clear events initialized flag upon event component termination Clear this flag to allow clean startup and even double termination. ACPICA BZ 1013. Tomasz Nowicki References: https://bugs.acpica.org/show_bug.cgi?id=1013 Signed-off-by: Tomasz Nowicki Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Reviewed-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index db59fe3..1b111ef 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -276,6 +276,8 @@ void acpi_ev_terminate(void) ACPI_ERROR((AE_INFO, "Could not remove Global Lock handler")); } + + acpi_gbl_events_initialized = FALSE; } /* Deallocate all handler objects installed within GPE info structs */ -- cgit v0.10.2 From 96070b1db1ffb837d59b501e743ffbda82b6a9d9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 11:32:00 +0530 Subject: cpufreq: blackfin: enable driver for CONFIG_BFIN_CPU_FREQ By mistake blackfin's cpufreq driver is enabled when CONFIG_BLACKFIN was present, whereas it should have been enabled only when CONFIG_BFIN_CPU_FREQ is present. Fix it. Acked-by: Mike Frysinger Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 315b923..13c3f83 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -83,7 +83,7 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o -obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o +obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o -- cgit v0.10.2 From 1cdff572624ccfdd772ee6cefe6616eeb90e4913 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: cris: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Cc: linux-cris-kernel@axis.com Signed-off-by: Viresh Kumar diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 8769a90..5f7530c 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -134,11 +134,13 @@ config SVINTO_SIM config ETRAXFS bool "ETRAX-FS-V32" + select CPU_FREQ_TABLE if CPU_FREQ help Support CRIS V32. config CRIS_MACH_ARTPEC3 bool "ARTPEC-3" + select CPU_FREQ_TABLE if CPU_FREQ help Support Axis ARTPEC-3. -- cgit v0.10.2 From d38066673dd8847d6598724a82e83688cae993ec Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: davinci: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Cc: Sekhar Nori Signed-off-by: Viresh Kumar diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a075b3e..e026b19 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -40,6 +40,7 @@ config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ + select CPU_FREQ_TABLE select CP_INTC config ARCH_DAVINCI_DA8XX -- cgit v0.10.2 From 46f3049fb280e8e6084bca71bd1ed74f828c14ef Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: exynos: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Cc: Kukjin Kim Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 6e57543..9d7e209 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -18,6 +18,7 @@ config ARM_DT_BL_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver common part for Samsung @@ -46,6 +47,7 @@ config ARM_EXYNOS5250_CPUFREQ config ARM_EXYNOS5440_CPUFREQ def_bool SOC_EXYNOS5440 depends on HAVE_CLK && PM_OPP && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Samsung EXYNOS5440 SoC. The nature of exynos5440 clock controller is -- cgit v0.10.2 From 29c4b5766eef1aa0c786056e536fae8bb82fbc78 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:08:44 +0530 Subject: cpufreq: highbank: remove select CPU_FREQ_TABLE Highbank cpufreq driver doesn't use any APIs from freq_table.c and so must not select CPU_FREQ_TABLE. Acked-by: Arnd Bergmann Acked-by: Mark Langsdorf Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 9d7e209..891dd1c 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -57,7 +57,6 @@ config ARM_EXYNOS5440_CPUFREQ config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK - select CPU_FREQ_TABLE select GENERIC_CPUFREQ_CPU0 select PM_OPP select REGULATOR -- cgit v0.10.2 From 5d6a62be1b0d035f84f00ff8ec49ba8ba2809650 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: imx: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Acked-by: Shawn Guo Acked-by: Arnd Bergmann Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 891dd1c..dc26303 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -72,6 +72,7 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6Q cpufreq support" depends on SOC_IMX6Q depends on REGULATOR_ANATOP + select CPU_FREQ_TABLE help This adds cpufreq driver support for Freescale i.MX6Q SOC. -- cgit v0.10.2 From 5f5e302b53cafe094d3c0ecad160a995f84ebab0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: powerpc: CBE_RAS: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Arnd Bergmann Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 9c926ca..68c1abc 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -1,6 +1,7 @@ config CPU_FREQ_CBE tristate "CBE frequency scaling" depends on CBE_RAS && PPC_CELL + select CPU_FREQ_TABLE default m help This adds the cpufreq driver for Cell BE processors. -- cgit v0.10.2 From 842e756bbc0cab9c3a488d2453110d0d18d4cbb5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: pxa: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Cc: Eric Miao Acked-by: Arnd Bergmann Signed-off-by: Viresh Kumar diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96100db..a842711 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -615,12 +615,14 @@ endmenu config PXA25x bool select CPU_XSCALE + select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE + select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA27x variants @@ -633,6 +635,7 @@ config CPU_PXA26x config PXA3xx bool select CPU_XSC3 + select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA3xx variants -- cgit v0.10.2 From 6866cba3a4fe1d06d6c4493d5c9a8736db4c5459 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: S3C2416/S3C64XX: select CPU_FREQ_TABLE CPUFreq driver of this platform uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Acked-by: Arnd Bergmann Acked-by: Heiko Stuebner Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index dc26303..d52261b 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -101,6 +101,7 @@ config ARM_OMAP2PLUS_CPUFREQ config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 + select CPU_FREQ_TABLE help This adds the CPUFreq driver for the Samsung S3C2416 and S3C2450 SoC. The S3C2416 supports changing the rate of the @@ -123,6 +124,7 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver for Samsung S3C6410 SoC. -- cgit v0.10.2 From dbb8d76e5ed9bb7f33a092f4aa5b28d8b1c872a4 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:05:48 +0530 Subject: cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQ currently Tegra cpufreq driver gets built based on ARCH_TEGRA, which doesn't depend on nor select CPU_FREQ itself, so: select CPU_FREQ_TABLE if CPU_FREQ ... isn't guaranteed to fire. The correct solution seems to be: * Add CONFIG_ARM_TEGRA_CPUFREQ to drivers/cpufreq/Kconfig.arm. * Make that Kconfig option selct CPU_FREQ_TABLE. * Make that Kconfig option be def_bool ARCH_TEGRA. * Modify drivers/cpufreq/Makefile to build tegra-cpufreq.c based on that. * Remove all the cpufreq-related stuff from arch/arm/mach-tegra/Kconfig. That way, tegra-cpufreq.c can't be built if !CPU_FREQ, and Tegra's cpufreq works the same way as all the other cpufreq drivers. This patch does it. Suggested-by: Stephen Warren Tested-by: Stephen Warren Acked-by: Stephen Warren Acked-by: Arnd Bergmann Signed-off-by: Viresh Kumar diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 84d72fc..5c0db06 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -28,7 +28,6 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_FREQ_TABLE if CPU_FREQ select CPU_V7 select PINCTRL select PINCTRL_TEGRA20 @@ -46,7 +45,6 @@ config ARCH_TEGRA_3x_SOC select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_FREQ_TABLE if CPU_FREQ select CPU_V7 select PINCTRL select PINCTRL_TEGRA30 @@ -63,7 +61,6 @@ config ARCH_TEGRA_114_SOC select ARM_ARCH_TIMER select ARM_GIC select ARM_L1_CACHE_SHIFT_6 - select CPU_FREQ_TABLE if CPU_FREQ select CPU_V7 select PINCTRL select PINCTRL_TEGRA114 diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index d52261b..5085427 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -154,3 +154,11 @@ config ARM_SPEAR_CPUFREQ default y help This adds the CPUFreq driver support for SPEAr SOCs. + +config ARM_TEGRA_CPUFREQ + bool "TEGRA CPUFreq support" + depends on ARCH_TEGRA + select CPU_FREQ_TABLE + default y + help + This adds the CPUFreq driver support for TEGRA SOCs. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 13c3f83..9c873e7 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -71,7 +71,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o -obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o +obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers -- cgit v0.10.2 From dbcc9f845efc604564f34a5fa62f939c2bebfff6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 12 Jun 2013 12:10:41 +0530 Subject: cpufreq: X86_AMD_FREQ_SENSITIVITY: select CPU_FREQ_TABLE This CPUFreq driver uses APIs from freq_table.c and so must select CPU_FREQ_TABLE. Acked-by: Jacob Shin Acked-by: Arnd Bergmann Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 6bd63d6..e2b6eab 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -132,6 +132,7 @@ config X86_POWERNOW_K8 config X86_AMD_FREQ_SENSITIVITY tristate "AMD frequency sensitivity feedback powersave bias" depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + select CPU_FREQ_TABLE help This adds AMD-specific powersave bias function to the ondemand governor, which allows it to make more power-conscious frequency -- cgit v0.10.2 From 08f502c1c343031f0d126bd00e87dede38269d12 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Tue, 18 Jun 2013 15:06:45 -0600 Subject: ACPI: Do not use CONFIG_ACPI_HOTPLUG_MEMORY_MODULE CONFIG_ACPI_HOTPLUG_MEMORY has been changed to bool (y/n), and its module option is no longer valid. So, stop using CONFIG_ACPI_HOTPLUG_MEMORY_MODULE. Signed-off-by: Toshi Kani Signed-off-by: Rafael J. Wysocki diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 17b5b59..353ba25 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -352,8 +352,7 @@ extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, /* Enable _OST when all relevant hotplug operations are enabled */ #if defined(CONFIG_ACPI_HOTPLUG_CPU) && \ - (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \ - defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) && \ + defined(CONFIG_ACPI_HOTPLUG_MEMORY) && \ defined(CONFIG_ACPI_CONTAINER) #define ACPI_HOTPLUG_OST #endif -- cgit v0.10.2 From f627217064dbef1eef53ceb01edb9c94203991e0 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 May 2013 12:42:44 +0000 Subject: ACPI / LPSS: add support for Intel BayTrail Intel BayTrail has almost the same Low Power Subsystem than Lynxpoint with few differences. Peripherals are clocked with different speeds (typically lower) and the clock is not always gated. To support this we add possibility to share a common fixed rate clock and make clock gating optional. Signed-off-by: Mika Westerberg Acked-by: Mike Turquette Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 652fd5c..f6d7605 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -33,11 +33,19 @@ ACPI_MODULE_NAME("acpi_lpss"); #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 +struct lpss_shared_clock { + const char *name; + unsigned long rate; + struct clk *clk; +}; + struct lpss_device_desc { bool clk_required; const char *clkdev_name; bool ltr_required; unsigned int prv_offset; + bool clk_gate; + struct lpss_shared_clock *shared_clock; }; static struct lpss_device_desc lpss_dma_desc = { @@ -56,6 +64,7 @@ static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, .prv_offset = 0x800, .ltr_required = true, + .clk_gate = true, }; static struct lpss_device_desc lpt_sdio_dev_desc = { @@ -63,6 +72,45 @@ static struct lpss_device_desc lpt_sdio_dev_desc = { .ltr_required = true, }; +static struct lpss_shared_clock uart_clock = { + .name = "uart_clk", + .rate = 44236800, +}; + +static struct lpss_device_desc byt_uart_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .clk_gate = true, + .shared_clock = &uart_clock, +}; + +static struct lpss_shared_clock spi_clock = { + .name = "spi_clk", + .rate = 50000000, +}; + +static struct lpss_device_desc byt_spi_dev_desc = { + .clk_required = true, + .prv_offset = 0x400, + .clk_gate = true, + .shared_clock = &spi_clock, +}; + +static struct lpss_device_desc byt_sdio_dev_desc = { + .clk_required = true, +}; + +static struct lpss_shared_clock i2c_clock = { + .name = "i2c_clk", + .rate = 100000000, +}; + +static struct lpss_device_desc byt_i2c_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .shared_clock = &i2c_clock, +}; + static const struct acpi_device_id acpi_lpss_device_ids[] = { /* Generic LPSS devices */ { "INTL9C60", (unsigned long)&lpss_dma_desc }, @@ -77,6 +125,13 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = { { "INT33C6", (unsigned long)&lpt_sdio_dev_desc }, { "INT33C7", }, + /* BayTrail LPSS devices */ + { "80860F0A", (unsigned long)&byt_uart_dev_desc }, + { "80860F0E", (unsigned long)&byt_spi_dev_desc }, + { "80860F14", (unsigned long)&byt_sdio_dev_desc }, + { "80860F41", (unsigned long)&byt_i2c_dev_desc }, + { "INT33B2", }, + { } }; @@ -98,7 +153,10 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_shared_clock *shared_clock = dev_desc->shared_clock; + struct clk *clk = ERR_PTR(-ENODEV); struct lpss_clk_data *clk_data; + const char *parent; if (!lpss_clk_dev) lpt_register_clock_device(); @@ -117,14 +175,30 @@ static int register_device_clock(struct acpi_device *adev, || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; - pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - clk_data->name, 0, - pdata->mmio_base + dev_desc->prv_offset, - 0, 0, NULL); - if (IS_ERR(pdata->clk)) - return PTR_ERR(pdata->clk); + parent = clk_data->name; + + if (shared_clock) { + clk = shared_clock->clk; + if (!clk) { + clk = clk_register_fixed_rate(NULL, shared_clock->name, + "lpss_clk", 0, + shared_clock->rate); + shared_clock->clk = clk; + } + parent = shared_clock->name; + } + + if (dev_desc->clk_gate) { + clk = clk_register_gate(NULL, dev_name(&adev->dev), parent, 0, + pdata->mmio_base + dev_desc->prv_offset, + 0, 0, NULL); + pdata->clk = clk; + } + + if (IS_ERR(clk)) + return PTR_ERR(clk); - clk_register_clkdev(pdata->clk, NULL, dev_name(&adev->dev)); + clk_register_clkdev(clk, NULL, dev_name(&adev->dev)); return 0; } diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 4f45eee..812f83f 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -1,5 +1,5 @@ /* - * Intel Lynxpoint LPSS clocks. + * Intel Low Power Subsystem clocks. * * Copyright (C) 2013, Intel Corporation * Authors: Mika Westerberg @@ -18,8 +18,6 @@ #include #include -#define PRV_CLOCK_PARAMS 0x800 - static int lpt_clk_probe(struct platform_device *pdev) { struct lpss_clk_data *drvdata; -- cgit v0.10.2 From 06d8641504726322fca54400bbac982bd44f9a27 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 17 Jun 2013 13:25:46 +0300 Subject: ACPI / LPSS: mask the UART TX completion interrupt Intel LPSS provides an extra TX byte counter and an extra TX completion interrupt for some of its bus controllers. However, there is no use for the extra UART interrupt and it has to be masked out during initialization. Otherwise, if the firmware does not mask the interrupt and the driver does not clear it, it may cause an interrupt flood freezing the board to happen. Add code masking that problematic interrupt to the ACPI LPSS driver. [rjw: Changelog] Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index f6d7605..bd9867f 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -32,6 +32,8 @@ ACPI_MODULE_NAME("acpi_lpss"); #define LPSS_GENERAL_LTR_MODE_SW BIT(2) #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 +#define LPSS_TX_INT 0x20 +#define LPSS_TX_INT_MASK BIT(1) struct lpss_shared_clock { const char *name; @@ -39,6 +41,8 @@ struct lpss_shared_clock { struct clk *clk; }; +struct lpss_private_data; + struct lpss_device_desc { bool clk_required; const char *clkdev_name; @@ -46,6 +50,7 @@ struct lpss_device_desc { unsigned int prv_offset; bool clk_gate; struct lpss_shared_clock *shared_clock; + void (*setup)(struct lpss_private_data *pdata); }; static struct lpss_device_desc lpss_dma_desc = { @@ -60,6 +65,15 @@ struct lpss_private_data { const struct lpss_device_desc *dev_desc; }; +static void lpss_uart_setup(struct lpss_private_data *pdata) +{ + unsigned int tx_int_offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + u32 reg; + + reg = readl(pdata->mmio_base + tx_int_offset); + writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + tx_int_offset); +} + static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, .prv_offset = 0x800, @@ -67,6 +81,14 @@ static struct lpss_device_desc lpt_dev_desc = { .clk_gate = true, }; +static struct lpss_device_desc lpt_uart_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .ltr_required = true, + .clk_gate = true, + .setup = lpss_uart_setup, +}; + static struct lpss_device_desc lpt_sdio_dev_desc = { .prv_offset = 0x1000, .ltr_required = true, @@ -82,6 +104,7 @@ static struct lpss_device_desc byt_uart_dev_desc = { .prv_offset = 0x800, .clk_gate = true, .shared_clock = &uart_clock, + .setup = lpss_uart_setup, }; static struct lpss_shared_clock spi_clock = { @@ -120,8 +143,8 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = { { "INT33C1", (unsigned long)&lpt_dev_desc }, { "INT33C2", (unsigned long)&lpt_dev_desc }, { "INT33C3", (unsigned long)&lpt_dev_desc }, - { "INT33C4", (unsigned long)&lpt_dev_desc }, - { "INT33C5", (unsigned long)&lpt_dev_desc }, + { "INT33C4", (unsigned long)&lpt_uart_dev_desc }, + { "INT33C5", (unsigned long)&lpt_uart_dev_desc }, { "INT33C6", (unsigned long)&lpt_sdio_dev_desc }, { "INT33C7", }, @@ -247,6 +270,9 @@ static int acpi_lpss_create_device(struct acpi_device *adev, } } + if (dev_desc->setup) + dev_desc->setup(pdata); + adev->driver_data = pdata; ret = acpi_create_platform_device(adev, id); if (ret > 0) -- cgit v0.10.2 From 958c4eb2aa325099ea1f54c7354e381e3d79f3ae Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 18 Jun 2013 16:51:35 +0300 Subject: ACPI / LPSS: override SDIO private register space size from ACPI tables The SDIO device in Lynxpoint has its LTR registers reserved for a WiFi device (a child of the SDIO device) in the ACPI namespace even though those registers physically belong to the SDIO device itself. In order to be able to access the SDIO LTR registers from the ACPI LPSS driver for diagnostic purposes we need to use a size override for the SDIO private register space. Add a possibility to override the size of the private register space of an LPSS device provided by the ACPI tables in the ACPI LPSS driver and set the correct size for the SDIO device in there. [rjw: Changelog] Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index bd9867f..a4e8c03 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -48,6 +48,7 @@ struct lpss_device_desc { const char *clkdev_name; bool ltr_required; unsigned int prv_offset; + size_t prv_size_override; bool clk_gate; struct lpss_shared_clock *shared_clock; void (*setup)(struct lpss_private_data *pdata); @@ -91,6 +92,7 @@ static struct lpss_device_desc lpt_uart_dev_desc = { static struct lpss_device_desc lpt_sdio_dev_desc = { .prv_offset = 0x1000, + .prv_size_override = 0x1018, .ltr_required = true, }; @@ -249,7 +251,10 @@ static int acpi_lpss_create_device(struct acpi_device *adev, list_for_each_entry(rentry, &resource_list, node) if (resource_type(&rentry->res) == IORESOURCE_MEM) { - pdata->mmio_size = resource_size(&rentry->res); + if (dev_desc->prv_size_override) + pdata->mmio_size = dev_desc->prv_size_override; + else + pdata->mmio_size = resource_size(&rentry->res); pdata->mmio_base = ioremap(rentry->res.start, pdata->mmio_size); pdata->dev_desc = dev_desc; -- cgit v0.10.2 From d1922f02562fe230396400e466e6e38dfeb072f5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 5 Jun 2013 11:47:38 +0530 Subject: cpufreq: Simplify userspace governor Userspace governor has got more code than what it needs for its functioning, so simplify it. Portions of code removed are: - Extra header files which aren't required anymore (rearrange them as well). - cpu_{max|min|cur|set}_freq, as they are always the same as policy->{max|min|cur}. - userspace_cpufreq_notifier_block as we don't need to set cpu_cur_freq anymore. - cpus_using_userspace_governor as it was for the notifier code. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index bbeb9c0..5dc77b7 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -13,55 +13,13 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include -#include -#include -#include -#include -#include #include -#include -#include -#include -#include +#include +#include #include -/** - * A few values needed by the userspace governor - */ -static DEFINE_PER_CPU(unsigned int, cpu_max_freq); -static DEFINE_PER_CPU(unsigned int, cpu_min_freq); -static DEFINE_PER_CPU(unsigned int, cpu_cur_freq); /* current CPU freq */ -static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by - userspace */ static DEFINE_PER_CPU(unsigned int, cpu_is_managed); - static DEFINE_MUTEX(userspace_mutex); -static int cpus_using_userspace_governor; - -/* keep track of frequency transitions */ -static int -userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (!per_cpu(cpu_is_managed, freq->cpu)) - return 0; - - if (val == CPUFREQ_POSTCHANGE) { - pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n", - freq->cpu, freq->new); - per_cpu(cpu_cur_freq, freq->cpu) = freq->new; - } - - return 0; -} - -static struct notifier_block userspace_cpufreq_notifier_block = { - .notifier_call = userspace_cpufreq_notifier -}; - /** * cpufreq_set - set the CPU frequency @@ -80,13 +38,6 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) if (!per_cpu(cpu_is_managed, policy->cpu)) goto err; - per_cpu(cpu_set_freq, policy->cpu) = freq; - - if (freq < per_cpu(cpu_min_freq, policy->cpu)) - freq = per_cpu(cpu_min_freq, policy->cpu); - if (freq > per_cpu(cpu_max_freq, policy->cpu)) - freq = per_cpu(cpu_max_freq, policy->cpu); - /* * We're safe from concurrent calls to ->target() here * as we hold the userspace_mutex lock. If we were calling @@ -107,7 +58,7 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) { - return sprintf(buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu)); + return sprintf(buf, "%u\n", policy->cur); } static int cpufreq_governor_userspace(struct cpufreq_policy *policy, @@ -119,66 +70,31 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, switch (event) { case CPUFREQ_GOV_START: BUG_ON(!policy->cur); - mutex_lock(&userspace_mutex); - - if (cpus_using_userspace_governor == 0) { - cpufreq_register_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } - cpus_using_userspace_governor++; + pr_debug("started managing cpu %u\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 1; - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; - per_cpu(cpu_set_freq, cpu) = policy->cur; - pr_debug("managing cpu %u started " - "(%u - %u kHz, currently %u kHz)\n", - cpu, - per_cpu(cpu_min_freq, cpu), - per_cpu(cpu_max_freq, cpu), - per_cpu(cpu_cur_freq, cpu)); - mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_STOP: - mutex_lock(&userspace_mutex); - cpus_using_userspace_governor--; - if (cpus_using_userspace_governor == 0) { - cpufreq_unregister_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } + pr_debug("managing cpu %u stopped\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 0; - per_cpu(cpu_min_freq, cpu) = 0; - per_cpu(cpu_max_freq, cpu) = 0; - per_cpu(cpu_set_freq, cpu) = 0; - pr_debug("managing cpu %u stopped\n", cpu); mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_LIMITS: mutex_lock(&userspace_mutex); - pr_debug("limit event for cpu %u: %u - %u kHz, " - "currently %u kHz, last set to %u kHz\n", + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n", cpu, policy->min, policy->max, - per_cpu(cpu_cur_freq, cpu), - per_cpu(cpu_set_freq, cpu)); - if (policy->max < per_cpu(cpu_set_freq, cpu)) { + policy->cur); + + if (policy->max < policy->cur) __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - } else if (policy->min > per_cpu(cpu_set_freq, cpu)) { + else if (policy->min > policy->cur) __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); - } else { - __cpufreq_driver_target(policy, - per_cpu(cpu_set_freq, cpu), - CPUFREQ_RELATION_L); - } - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; mutex_unlock(&userspace_mutex); break; } -- cgit v0.10.2 From ecde3003e5205a283b46b931c729a2aecab64ba1 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Wed, 22 May 2013 14:59:11 +0200 Subject: ACPI / EC: access user space with get_user()/put_user() User space pointer may not be dereferenced. Use get_user()/put_user() instead and check their return codes. Signed-off-by: Vasiliy Kulikov Signed-off-by: Thomas Renninger Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c index 7586544..4e7b798 100644 --- a/drivers/acpi/ec_sys.c +++ b/drivers/acpi/ec_sys.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "internal.h" MODULE_AUTHOR("Thomas Renninger "); @@ -34,7 +35,6 @@ static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; */ unsigned int size = EC_SPACE_SIZE; - u8 *data = (u8 *) buf; loff_t init_off = *off; int err = 0; @@ -47,9 +47,15 @@ static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, size = count; while (size) { - err = ec_read(*off, &data[*off - init_off]); + u8 byte_read; + err = ec_read(*off, &byte_read); if (err) return err; + if (put_user(byte_read, buf + *off - init_off)) { + if (*off - init_off) + return *off - init_off; /* partial read */ + return -EFAULT; + } *off += 1; size--; } @@ -65,7 +71,6 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, unsigned int size = count; loff_t init_off = *off; - u8 *data = (u8 *) buf; int err = 0; if (*off >= EC_SPACE_SIZE) @@ -76,7 +81,12 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, } while (size) { - u8 byte_write = data[*off - init_off]; + u8 byte_write; + if (get_user(byte_write, buf + *off - init_off)) { + if (*off - init_off) + return *off - init_off; /* partial write */ + return -EFAULT; + } err = ec_write(*off, byte_write); if (err) return err; -- cgit v0.10.2 From c7d9ca90aa9497f0b6e301ec67c52dd4b57a7852 Mon Sep 17 00:00:00 2001 From: Jeff Wu Date: Wed, 29 May 2013 06:31:30 +0000 Subject: ACPI: add _STA evaluation at do_acpi_find_child() Once do_acpi_find_child() has found the first matching handle, it makes the acpi_get_child() loop stop and return that handle. On some platforms, though, there are multiple devices with the same value of "_ADR" in the same namespace scope, and if one of them is enabled, the others will be disabled. For example: Address : 0x1FFFF ; path : SB_PCI0.SATA.DEV0 Address : 0x1FFFF ; path : SB_PCI0.SATA.DEV1 Address : 0x1FFFF ; path : SB_PCI0.SATA.DEV2 If DEV0 and DEV1 are disabled and DEV2 is enabled, the handle of DEV2 should be returned, but actually the function always returns the handle of DEV0. To address that issue, make do_acpi_find_child() evaluate _STA to check the device status. If a matching device object exists, but is disabled, acpi_get_child() will continue to walk the namespace in the hope of finding an enabled one. If one is found, its handle will be returned, but otherwise the function will return the handle of the disabled object found before (in case it is enabled going forward). [rjw: Changelog] Signed-off-by: Jeff Wu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 40a84cc..51ca764 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -81,13 +81,15 @@ static struct acpi_bus_type *acpi_get_bus_type(struct device *dev) static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used, void *addr_p, void **ret_p) { - unsigned long long addr; + unsigned long long addr, sta; acpi_status status; status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr); if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) { *ret_p = handle; - return AE_CTRL_TERMINATE; + status = acpi_bus_get_status_handle(handle, &sta); + if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_ENABLED)) + return AE_CTRL_TERMINATE; } return AE_OK; } -- cgit v0.10.2 From 0f4c65478d2ac03296415a5bdac1ead3e24cfc5b Mon Sep 17 00:00:00 2001 From: Nicholas Mazzuca Date: Wed, 8 May 2013 23:11:15 +0000 Subject: ACPI / battery: Make sure all spaces are in correct places Add or remove spaces that give errors or warnings from checkpatch.pl. Signed-off-by: Nicholas Mazzuca Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index e710045..082b4dd 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -425,7 +425,7 @@ static int acpi_battery_get_info(struct acpi_battery *battery) { int result = -EFAULT; acpi_status status = 0; - char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags)? + char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags) ? "_BIX" : "_BIF"; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -661,11 +661,11 @@ static void find_battery(const struct dmi_header *dm, void *private) static void acpi_battery_quirks(struct acpi_battery *battery) { if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) - return ; + return; - if (battery->full_charge_capacity == 100 && - battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && - battery->capacity_now >=0 && battery->capacity_now <= 100) { + if (battery->full_charge_capacity == 100 && + battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && + battery->capacity_now >= 0 && battery->capacity_now <= 100) { set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); battery->full_charge_capacity = battery->design_capacity; battery->capacity_now = (battery->capacity_now * @@ -673,7 +673,7 @@ static void acpi_battery_quirks(struct acpi_battery *battery) } if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) - return ; + return; if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { const char *s; @@ -761,7 +761,7 @@ static int acpi_battery_print_info(struct seq_file *seq, int result) goto end; seq_printf(seq, "present: %s\n", - acpi_battery_present(battery)?"yes":"no"); + acpi_battery_present(battery) ? "yes" : "no"); if (!acpi_battery_present(battery)) goto end; if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN) @@ -817,12 +817,12 @@ static int acpi_battery_print_state(struct seq_file *seq, int result) goto end; seq_printf(seq, "present: %s\n", - acpi_battery_present(battery)?"yes":"no"); + acpi_battery_present(battery) ? "yes" : "no"); if (!acpi_battery_present(battery)) goto end; seq_printf(seq, "capacity state: %s\n", - (battery->state & 0x04)?"critical":"ok"); + (battery->state & 0x04) ? "critical" : "ok"); if ((battery->state & 0x01) && (battery->state & 0x02)) seq_printf(seq, "charging state: charging/discharging\n"); -- cgit v0.10.2 From 6a8c0af6e2d6c472517959b66c96900151c9cb5b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 3 Jun 2013 18:20:24 +0000 Subject: ACPI: Remove useless initializers These local variables are all initialized at their first use, so there's no point in initializing them earlier. Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 292de3c..a5bb33b 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -91,8 +91,7 @@ static struct dmi_system_id dsdt_dmi_table[] __initdata = { int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) { - acpi_status status = AE_OK; - + acpi_status status; if (!device) return -EINVAL; @@ -162,7 +161,7 @@ EXPORT_SYMBOL(acpi_bus_private_data_handler); int acpi_bus_get_private_data(acpi_handle handle, void **data) { - acpi_status status = AE_OK; + acpi_status status; if (!*data) return -EINVAL; @@ -361,7 +360,7 @@ extern int event_is_open; int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, u8 type, int data) { struct acpi_bus_event *event; - unsigned long flags = 0; + unsigned long flags; /* drop event on the floor if no one's listening */ if (!event_is_open) @@ -400,7 +399,7 @@ EXPORT_SYMBOL(acpi_bus_generate_proc_event); int acpi_bus_receive_event(struct acpi_bus_event *event) { - unsigned long flags = 0; + unsigned long flags; struct acpi_bus_event *entry = NULL; DECLARE_WAITQUEUE(wait, current); @@ -593,7 +592,7 @@ static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) static int __init acpi_bus_init_irq(void) { - acpi_status status = AE_OK; + acpi_status status; union acpi_object arg = { ACPI_TYPE_INTEGER }; struct acpi_object_list arg_list = { 1, &arg }; char *message = NULL; @@ -640,7 +639,7 @@ u8 acpi_gbl_permanent_mmap; void __init acpi_early_init(void) { - acpi_status status = AE_OK; + acpi_status status; if (acpi_disabled) return; @@ -714,8 +713,8 @@ void __init acpi_early_init(void) static int __init acpi_bus_init(void) { - int result = 0; - acpi_status status = AE_OK; + int result; + acpi_status status; extern acpi_status acpi_os_initialize1(void); acpi_os_initialize1(); -- cgit v0.10.2 From 358b4b35c8fa97a83c4d476cbd0830205504d798 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Tue, 4 Jun 2013 21:56:25 +0000 Subject: ACPI: Remove unused flags in acpi_device_flags suprise_removal_ok and performance_manageable in struct acpi_device_flags are not used by any code. So, remove them. Signed-off-by: Toshi Kani Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 636c59f..b790607 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -163,12 +163,10 @@ struct acpi_device_flags { u32 dynamic_status:1; u32 removable:1; u32 ejectable:1; - u32 suprise_removal_ok:1; u32 power_manageable:1; - u32 performance_manageable:1; u32 eject_pending:1; u32 match_driver:1; - u32 reserved:24; + u32 reserved:26; }; /* File System */ -- cgit v0.10.2 From d6a77ead21b69c395ca6d09a066ededfac601bcc Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 14 May 2013 17:09:16 +0000 Subject: x86 / ACPI / sleep: Provide registration for acpi_suspend_lowlevel. Which by default will be x86_acpi_suspend_lowlevel. This registration allows us to register another callback if there is a need to use another platform specific callback. Signed-off-by: Liang Tang Signed-off-by: Konrad Rzeszutek Wilk Tested-by: Ben Guthro Acked-by: "H. Peter Anvin" Signed-off-by: Rafael J. Wysocki diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index b31bf97..2dfac58 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -111,7 +111,7 @@ static inline void acpi_disable_pci(void) } /* Low-level suspend routine. */ -extern int acpi_suspend_lowlevel(void); +extern int (*acpi_suspend_lowlevel)(void); /* Physical address to resume after wakeup */ #define acpi_wakeup_address ((unsigned long)(real_mode_header->wakeup_start)) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 230c8ea..d81a972 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -44,6 +44,7 @@ #include #include +#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */ static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; int acpi_disabled; @@ -559,6 +560,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi, int (*__acpi_register_gsi)(struct device *dev, u32 gsi, int trigger, int polarity) = acpi_register_gsi_pic; +#ifdef CONFIG_ACPI_SLEEP +int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel; +#else +int (*acpi_suspend_lowlevel)(void); +#endif + /* * success: return IRQ number (>=0) * failure: return < 0 diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index b44577b..2a34aaf 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -26,12 +26,12 @@ static char temp_stack[4096]; #endif /** - * acpi_suspend_lowlevel - save kernel state + * x86_acpi_suspend_lowlevel - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_suspend_lowlevel(void) +int x86_acpi_suspend_lowlevel(void) { struct wakeup_header *header = (struct wakeup_header *) __va(real_mode_header->wakeup_header); diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 67f59f8..c9c2c98 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -15,3 +15,5 @@ extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); extern void do_suspend_lowlevel(void); + +extern int x86_acpi_suspend_lowlevel(void); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 9c1a435..187ab61 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -494,6 +494,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) break; case ACPI_STATE_S3: + if (!acpi_suspend_lowlevel) + return -ENOSYS; error = acpi_suspend_lowlevel(); if (error) return error; -- cgit v0.10.2 From 068e0dc7b7c1db9801e3d7f2ba5cb1d2a552a35b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 14 May 2013 17:46:12 +0000 Subject: xen / ACPI / sleep: Register an acpi_suspend_lowlevel callback. We piggyback on "x86/acpi: Provide registration for acpi_suspend_lowlevel." to register a Xen version of the callback. The callback does not do anything special - except it omits the x86_acpi_suspend_lowlevel. This is necessary b/c during suspend the generic code tries to write cr3 values that clashes with what the hypervisor has set up for the guest. Signed-off-by: Liang Tang Signed-off-by: Konrad Rzeszutek Wilk Tested-by: Ben Guthro Acked-by: H. Peter Anvin Signed-off-by: Rafael J. Wysocki diff --git a/include/xen/acpi.h b/include/xen/acpi.h index 68d73d0..46aa3d1 100644 --- a/include/xen/acpi.h +++ b/include/xen/acpi.h @@ -78,11 +78,25 @@ static inline int xen_acpi_get_pxm(acpi_handle h) int xen_acpi_notify_hypervisor_state(u8 sleep_state, u32 pm1a_cnt, u32 pm1b_cnd); +static inline int xen_acpi_suspend_lowlevel(void) +{ + /* + * Xen will save and restore CPU context, so + * we can skip that and just go straight to + * the suspend. + */ + acpi_enter_sleep_state(ACPI_STATE_S3); + return 0; +} + static inline void xen_acpi_sleep_register(void) { - if (xen_initial_domain()) + if (xen_initial_domain()) { acpi_os_set_prepare_sleep( &xen_acpi_notify_hypervisor_state); + + acpi_suspend_lowlevel = xen_acpi_suspend_lowlevel; + } } #else static inline void xen_acpi_sleep_register(void) -- cgit v0.10.2 From 95d45d4cab6540e3f2183d86662c255fa4332331 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 11 Jun 2013 00:55:10 +0200 Subject: ACPI / PM: acpi_processor_suspend() can be static Since acpi_processor_suspend() and acpi_processor_resume() need not be visible outside of the file they are defined in, make them static. [rjw: Changelog] Signed-off-by: Fengguang Wu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index eb133c7..0461ccc 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -214,13 +214,13 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; -int acpi_processor_suspend(void) +static int acpi_processor_suspend(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); return 0; } -void acpi_processor_resume(void) +static void acpi_processor_resume(void) { u32 resumed_bm_rld; -- cgit v0.10.2 From b25c77efa71178f8281401e492e5c63cf7c34900 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:37:42 +0200 Subject: ACPI / PM: Rename function acpi_device_power_state() and make it static There is a name clash between function acpi_device_power_state() defined in drivers/acpi/device_pm.c and structure type acpi_device_power_state defined in include/acpi/acpi_bus.h, which may be resolved by renaming the function. Additionally, that funtion may be made static, because it is not used anywhere outside of the file it is defined in. Rename acpi_device_power_state() to acpi_dev_pm_get_state(), which better reflects its purpose, and make it static. Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 318fa32..26d3fd7 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -399,7 +399,7 @@ bool acpi_bus_can_wakeup(acpi_handle handle) EXPORT_SYMBOL(acpi_bus_can_wakeup); /** - * acpi_device_power_state - Get preferred power state of ACPI device. + * acpi_dev_pm_get_state - Get preferred power state of ACPI device. * @dev: Device whose preferred target power state to return. * @adev: ACPI device node corresponding to @dev. * @target_state: System state to match the resultant device state. @@ -417,8 +417,8 @@ EXPORT_SYMBOL(acpi_bus_can_wakeup); * Callers must ensure that @dev and @adev are valid pointers and that @adev * actually corresponds to @dev before using this function. */ -int acpi_device_power_state(struct device *dev, struct acpi_device *adev, - u32 target_state, int d_max_in, int *d_min_p) +static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, + u32 target_state, int d_max_in, int *d_min_p) { char acpi_method[] = "_SxD"; unsigned long long d_min, d_max; @@ -501,7 +501,6 @@ int acpi_device_power_state(struct device *dev, struct acpi_device *adev, } return d_max; } -EXPORT_SYMBOL_GPL(acpi_device_power_state); /** * acpi_pm_device_sleep_state - Get preferred power state of ACPI device. @@ -523,8 +522,8 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) return -ENODEV; } - return acpi_device_power_state(dev, adev, acpi_target_system_state(), - d_max_in, d_min_p); + return acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(), + d_max_in, d_min_p); } EXPORT_SYMBOL(acpi_pm_device_sleep_state); @@ -680,8 +679,8 @@ static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev, if (!acpi_device_power_manageable(adev)) return 0; - power_state = acpi_device_power_state(dev, adev, system_state, - ACPI_STATE_D3, NULL); + power_state = acpi_dev_pm_get_state(dev, adev, system_state, + ACPI_STATE_D3, NULL); if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3) return -EIO; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 636c59f..c3dc203 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -467,8 +467,6 @@ acpi_status acpi_add_pm_notifier(struct acpi_device *adev, acpi_notify_handler handler, void *context); acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, acpi_notify_handler handler); -int acpi_device_power_state(struct device *dev, struct acpi_device *adev, - u32 target_state, int d_max_in, int *d_min_p); int acpi_pm_device_sleep_state(struct device *, int *, int); void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev); void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev); @@ -484,23 +482,13 @@ static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, { return AE_SUPPORT; } -static inline int __acpi_device_power_state(int m, int *p) +static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m) { if (p) *p = ACPI_STATE_D0; + return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0; } -static inline int acpi_device_power_state(struct device *dev, - struct acpi_device *adev, - u32 target_state, int d_max_in, - int *d_min_p) -{ - return __acpi_device_power_state(d_max_in, d_min_p); -} -static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m) -{ - return __acpi_device_power_state(m, p); -} static inline void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev) {} static inline void acpi_dev_pm_remove_dependent(acpi_handle handle, -- cgit v0.10.2 From 4c164ae7d8a7ee1f39b773d97794535c2c193b12 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:37:50 +0200 Subject: ACPI / PM: Replace ACPI_STATE_D3 with ACPI_STATE_D3_COLD in device_pm.c The two symbols ACPI_STATE_D3 and ACPI_STATE_D3_COLD actually represent the same number (4), but ACPI_STATE_D3 is slightly ambigugous, because it may not be clear that it really means D3cold and not D3hot at first sight. Remove that ambiguity from drivers/acpi/device_pm.c by making it use ACPI_STATE_D3_COLD everywhere instead of ACPI_STATE_D3. Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 26d3fd7..afc808e 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -424,7 +424,7 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, unsigned long long d_min, d_max; bool wakeup = false; - if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) return -EINVAL; if (d_max_in > ACPI_STATE_D3_HOT) { @@ -443,7 +443,7 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, * the lowest limit with the specified one. */ d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; + d_max = ACPI_STATE_D3_COLD; /* * If present, _SxD methods return the minimum D-state (highest power @@ -680,8 +680,8 @@ static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev, return 0; power_state = acpi_dev_pm_get_state(dev, adev, system_state, - ACPI_STATE_D3, NULL); - if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3) + ACPI_STATE_D3_COLD, NULL); + if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3_COLD) return -EIO; return acpi_device_set_power(adev, power_state); -- cgit v0.10.2 From fa1675b56537651270e79967b7f1ee4202c83bf6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:37:59 +0200 Subject: ACPI / PM: Rework and clean up acpi_dev_pm_get_state() The acpi_dev_pm_get_state() function defined in device_pm.c is quite convoluted, which isn't really necessary, and it doesn't validate the values returned by the ACPI methods executed by it appropriately. To address these shortcomings modify it in the following way. (1) Make its return value only mean whether or not it succeeded and pass the device power states determined by it through pointers. (2) Drop the d_max_in argument, used by only one of its callers, from it, and move the code related to d_max_in into that caller, acpi_pm_device_sleep_state(). (3) Make it always check the return value of acpi_evaluate_integer() and handle failures as appropriate. Moreover, make it check if the values returned by the executed ACPI methods are not out of range. (4) Make it check if the values returned by the executed ACPI methods represent valid power states of the given device and handle situations in which that's not the case gracefully. Also update the kerneldoc comments of acpi_dev_pm_get_state() and acpi_pm_device_sleep_state() to reflect the code changes. Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index afc808e..fd363b5 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -403,44 +403,37 @@ EXPORT_SYMBOL(acpi_bus_can_wakeup); * @dev: Device whose preferred target power state to return. * @adev: ACPI device node corresponding to @dev. * @target_state: System state to match the resultant device state. - * @d_max_in: Deepest low-power state to take into consideration. - * @d_min_p: Location to store the upper limit of the allowed states range. - * Return value: Preferred power state of the device on success, -ENODEV - * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * @d_min_p: Location to store the highest power state available to the device. + * @d_max_p: Location to store the lowest power state available to the device. * - * Find the lowest power (highest number) ACPI device power state that the - * device can be in while the system is in the state represented by - * @target_state. If @d_min_p is set, the highest power (lowest number) device - * power state that @dev can be in for the given system sleep state is stored - * at the location pointed to by it. + * Find the lowest power (highest number) and highest power (lowest number) ACPI + * device power states that the device can be in while the system is in the + * state represented by @target_state. Store the integer numbers representing + * those stats in the memory locations pointed to by @d_max_p and @d_min_p, + * respectively. * * Callers must ensure that @dev and @adev are valid pointers and that @adev * actually corresponds to @dev before using this function. + * + * Returns 0 on success or -ENODATA when one of the ACPI methods fails or + * returns a value that doesn't make sense. The memory locations pointed to by + * @d_max_p and @d_min_p are only modified on success. */ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, - u32 target_state, int d_max_in, int *d_min_p) + u32 target_state, int *d_min_p, int *d_max_p) { - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; + char method[] = { '_', 'S', '0' + target_state, 'D', '\0' }; + acpi_handle handle = adev->handle; + unsigned long long ret; + int d_min, d_max; bool wakeup = false; + acpi_status status; - if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) - return -EINVAL; - - if (d_max_in > ACPI_STATE_D3_HOT) { - enum pm_qos_flags_status stat; - - stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); - if (stat == PM_QOS_FLAGS_ALL) - d_max_in = ACPI_STATE_D3_HOT; - } - - acpi_method[2] = '0' + target_state; /* - * If the sleep state is S0, the lowest limit from ACPI is D3, - * but if the device has _S0W, we will use the value from _S0W - * as the lowest limit from ACPI. Finally, we will constrain - * the lowest limit with the specified one. + * If the system state is S0, the lowest power state the device can be + * in is D3cold, unless the device has _S0W and is supposed to signal + * wakeup, in which case the return value of _S0W has to be used as the + * lowest power state available to the device. */ d_min = ACPI_STATE_D0; d_max = ACPI_STATE_D3_COLD; @@ -449,12 +442,30 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, * If present, _SxD methods return the minimum D-state (highest power * state) we can use for the corresponding S-states. Otherwise, the * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. */ if (target_state > ACPI_STATE_S0) { - acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min); + /* + * We rely on acpi_evaluate_integer() not clobbering the integer + * provided if AE_NOT_FOUND is returned. + */ + ret = d_min; + status = acpi_evaluate_integer(handle, method, NULL, &ret); + if ((ACPI_FAILURE(status) && status != AE_NOT_FOUND) + || ret > ACPI_STATE_D3_COLD) + return -ENODATA; + + /* + * We need to handle legacy systems where D3hot and D3cold are + * the same and 3 is returned in both cases, so fall back to + * D3cold if D3hot is not a valid state. + */ + if (!adev->power.states[ret].flags.valid) { + if (ret == ACPI_STATE_D3_HOT) + ret = ACPI_STATE_D3_COLD; + else + return -ENODATA; + } + d_min = ret; wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid && adev->wakeup.sleep_state >= target_state; } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) != @@ -470,36 +481,29 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, * can wake the system. _S0W may be valid, too. */ if (wakeup) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(adev->handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - if (target_state != ACPI_STATE_S0 || - status != AE_NOT_FOUND) + method[3] = 'W'; + status = acpi_evaluate_integer(handle, method, NULL, &ret); + if (status == AE_NOT_FOUND) { + if (target_state > ACPI_STATE_S0) d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; + } else if (ACPI_SUCCESS(status) && ret <= ACPI_STATE_D3_COLD) { + /* Fall back to D3cold if ret is not a valid state. */ + if (!adev->power.states[ret].flags.valid) + ret = ACPI_STATE_D3_COLD; + + d_max = ret > d_min ? ret : d_min; + } else { + return -ENODATA; } } - if (d_max_in < d_min) - return -EINVAL; if (d_min_p) *d_min_p = d_min; - /* constrain d_max with specified lowest limit (max number) */ - if (d_max > d_max_in) { - for (d_max = d_max_in; d_max > d_min; d_max--) { - if (adev->power.states[d_max].flags.valid) - break; - } - } - return d_max; + + if (d_max_p) + *d_max_p = d_max; + + return 0; } /** @@ -508,7 +512,8 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, * @d_min_p: Location to store the upper limit of the allowed states range. * @d_max_in: Deepest low-power state to take into consideration. * Return value: Preferred power state of the device on success, -ENODEV - * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * if there's no 'struct acpi_device' for @dev, -EINVAL if @d_max_in is + * incorrect, or -ENODATA on ACPI method failure. * * The caller must ensure that @dev is valid before using this function. */ @@ -516,14 +521,39 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; + int ret, d_max; + + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) + return -EINVAL; + + if (d_max_in > ACPI_STATE_D3_HOT) { + enum pm_qos_flags_status stat; + + stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); + if (stat == PM_QOS_FLAGS_ALL) + d_max_in = ACPI_STATE_D3_HOT; + } if (!handle || acpi_bus_get_device(handle, &adev)) { dev_dbg(dev, "ACPI handle without context in %s!\n", __func__); return -ENODEV; } - return acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(), - d_max_in, d_min_p); + ret = acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(), + d_min_p, &d_max); + if (ret) + return ret; + + if (d_max_in < *d_min_p) + return -EINVAL; + + if (d_max > d_max_in) { + for (d_max = d_max_in; d_max > *d_min_p; d_max--) { + if (adev->power.states[d_max].flags.valid) + break; + } + } + return d_max; } EXPORT_SYMBOL(acpi_pm_device_sleep_state); @@ -674,17 +704,13 @@ struct acpi_device *acpi_dev_pm_get_node(struct device *dev) static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev, u32 system_state) { - int power_state; + int ret, state; if (!acpi_device_power_manageable(adev)) return 0; - power_state = acpi_dev_pm_get_state(dev, adev, system_state, - ACPI_STATE_D3_COLD, NULL); - if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3_COLD) - return -EIO; - - return acpi_device_set_power(adev, power_state); + ret = acpi_dev_pm_get_state(dev, adev, system_state, NULL, &state); + return ret ? ret : acpi_device_set_power(adev, state); } /** -- cgit v0.10.2 From 66345d5f79fcfa0214f5d98763643d4ee8e6965d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:36:26 +0200 Subject: ACPI / ia64 / sba_iommu: Use ACPI scan handler for device discovery The IA64 System Bus Adapter (SBA) I/O MMU driver uses an ACPI driver object to look for device objects it needs in the ACPI namespace, but that leads to an ordering issue between that driver and the container scan handler on ia64 HP rx2600. Namely, on that machine the SBA I/O MMU device object in the ACPI namespace has a _HID returning its own specific device ID and a _CID returning a generic container device ID. According to Toshi Kani, the idea is that if a _HID is not mached by an I/O MMU driver, the _CID should be matched by a generic container driver, so those device IDs should be used mutually exclusively. That is not what happens, however, because the container driver uses an ACPI scan handler which is matched against the device object in question before registering the SBA I/O MMU driver object. As a result, that scan handler claims the device object first. The driver binds to the same device object later, however, and they both happily use it simultaneously going forward (fortunately, that doesn't cause any real breakage to happen). To avoid that ordering issue, make the SBA I/O MMU code use an ACPI scan handler instead of an ACPI driver, so that it can claim the SBA I/O MMU device object before the container driver (thanks to an improved algorithm of matching ACPI device IDs used for ACPI scan handlers, which matches device _HIDs against the registered scan handlers before _CIDs). This also reduces the kernel's memory footprint slightly by avoiding to register a driver object that's not used after system initialization, so having it registered (and present in sysfs) throughout the system's life time isn't particularly useful. Signed-off-by: Rafael J. Wysocki Tested-by: Tony Luck Acked-by: Toshi Kani diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index bcda5b2..d43daf1 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2042,7 +2042,8 @@ sba_map_ioc_to_node(struct ioc *ioc, acpi_handle handle) #endif static int __init -acpi_sba_ioc_add(struct acpi_device *device) +acpi_sba_ioc_add(struct acpi_device *device, + const struct acpi_device_id *not_used) { struct ioc *ioc; acpi_status status; @@ -2090,14 +2091,18 @@ static const struct acpi_device_id hp_ioc_iommu_device_ids[] = { {"HWP0004", 0}, {"", 0}, }; -static struct acpi_driver acpi_sba_ioc_driver = { - .name = "IOC IOMMU Driver", - .ids = hp_ioc_iommu_device_ids, - .ops = { - .add = acpi_sba_ioc_add, - }, +static struct acpi_scan_handler acpi_sba_ioc_handler = { + .ids = hp_ioc_iommu_device_ids, + .attach = acpi_sba_ioc_add, }; +static int __init acpi_sba_ioc_init_acpi(void) +{ + return acpi_scan_add_handler(&acpi_sba_ioc_handler); +} +/* This has to run before acpi_scan_init(). */ +arch_initcall(acpi_sba_ioc_init_acpi); + extern struct dma_map_ops swiotlb_dma_ops; static int __init @@ -2122,7 +2127,10 @@ sba_init(void) } #endif - acpi_bus_register_driver(&acpi_sba_ioc_driver); + /* + * ioc_list should be populated by the acpi_sba_ioc_handler's .attach() + * routine, but that only happens if acpi_scan_init() has already run. + */ if (!ioc_list) { #ifdef CONFIG_IA64_GENERIC /* -- cgit v0.10.2 From 24071f472d813fccacc1ef7356b1f41422a1b968 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jun 2013 00:36:41 +0200 Subject: ACPI / scan: Do not bind ACPI drivers to objects with scan handlers ACPI drivers must not be bound to device objects having scan handlers attatched to them, so make acpi_device_probe() fail with -EINVAL if the device object being probed has an ACPI scan handler. After this change the analogous check introduced into the ACPI video driver by commit 8c9b7a7 (ACPI / video: Do not bind to device objects with a scan handler) is not necessary any more and may be dropped, so drop it. Signed-off-by: Rafael J. Wysocki Tested-by: Tony Luck Acked-by: Toshi Kani diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 4eeea22..5452942 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -822,6 +822,9 @@ static int acpi_device_probe(struct device *dev) struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); int ret; + if (acpi_dev->handler) + return -EINVAL; + if (!acpi_drv->ops.add) return -ENOSYS; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 440eadf..5d7075d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1722,9 +1722,6 @@ static int acpi_video_bus_add(struct acpi_device *device) int error; acpi_status status; - if (device->handler) - return -EINVAL; - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, device->parent->handle, 1, acpi_video_bus_match, NULL, -- cgit v0.10.2 From aa6329c44bccedbd8b17094c1c1aee1d9a9de461 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 8 Jun 2013 09:01:01 +0800 Subject: ACPICA: Move _PRT repair into the standard complex repair module Moved this longstanding repair to the relatively new predefined name repair module. ACPICA BZ 783. Lv Zheng. No functional change. This change simply moves the repair code from where it was originally implemented to the (more recent) repair module where it now belongs. References: https://bugs.acpica.org/show_bug.cgi?id=783 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 600268d..8d59ac2 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -158,7 +158,12 @@ acpi_ns_check_return_value(struct acpi_namespace_node *node, info->parent_package = *return_object_ptr; status = acpi_ns_check_package(info, return_object_ptr); if (ACPI_FAILURE(status)) { - goto exit; + + /* We might be able to fix an operand type error (_PRT) */ + + if (status != AE_AML_OPERAND_TYPE) { + goto exit; + } } } diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index daac8da..aca9bdf 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -87,6 +87,10 @@ acpi_ns_repair_HID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status +acpi_ns_repair_PRT(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr); + +static acpi_status acpi_ns_repair_PSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); @@ -121,6 +125,7 @@ acpi_ns_sort_list(union acpi_operand_object **elements, * _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs * _HID: Strings: uppercase all, remove any leading asterisk + * _PRT: Fix reversed source_name and source_index * _PSS: Sort the list descending by Power * _TSS: Sort the list descending by Power * @@ -137,6 +142,7 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { {"_FDE", acpi_ns_repair_FDE}, {"_GTM", acpi_ns_repair_FDE}, /* _GTM has same repair as _FDE */ {"_HID", acpi_ns_repair_HID}, + {"_PRT", acpi_ns_repair_PRT}, {"_PSS", acpi_ns_repair_PSS}, {"_TSS", acpi_ns_repair_TSS}, {{0, 0, 0, 0}, NULL} /* Table terminator */ @@ -488,7 +494,7 @@ acpi_ns_repair_HID(struct acpi_evaluate_info *info, /****************************************************************************** * - * FUNCTION: acpi_ns_repair_TSS + * FUNCTION: acpi_ns_repair_PRT * * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the @@ -496,38 +502,54 @@ acpi_ns_repair_HID(struct acpi_evaluate_info *info, * * RETURN: Status. AE_OK if object is OK or was repaired successfully * - * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list - * descending by the power dissipation values. + * DESCRIPTION: Repair for the _PRT object. If necessary, fix reversed + * source_name and source_index field, a common BIOS bug. * *****************************************************************************/ static acpi_status -acpi_ns_repair_TSS(struct acpi_evaluate_info *info, +acpi_ns_repair_PRT(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { - union acpi_operand_object *return_object = *return_object_ptr; - acpi_status status; - struct acpi_namespace_node *node; + union acpi_operand_object *package_object = *return_object_ptr; + union acpi_operand_object **top_object_list; + union acpi_operand_object **sub_object_list; + union acpi_operand_object *obj_desc; + u32 element_count; + u32 index; - /* - * We can only sort the _TSS return package if there is no _PSS in the - * same scope. This is because if _PSS is present, the ACPI specification - * dictates that the _TSS Power Dissipation field is to be ignored, and - * therefore some BIOSs leave garbage values in the _TSS Power field(s). - * In this case, it is best to just return the _TSS package as-is. - * (May, 2011) - */ - status = acpi_ns_get_node(info->node, "^_PSS", - ACPI_NS_NO_UPSEARCH, &node); - if (ACPI_SUCCESS(status)) { - return (AE_OK); - } + /* Each element in the _PRT package is a subpackage */ - status = acpi_ns_check_sorted_list(info, return_object, 5, 1, - ACPI_SORT_DESCENDING, - "PowerDissipation"); + top_object_list = package_object->package.elements; + element_count = package_object->package.count; - return (status); + for (index = 0; index < element_count; index++) { + sub_object_list = (*top_object_list)->package.elements; + + /* + * If the BIOS has erroneously reversed the _PRT source_name (index 2) + * and the source_index (index 3), fix it. _PRT is important enough to + * workaround this BIOS error. This also provides compatibility with + * other ACPI implementations. + */ + obj_desc = sub_object_list[3]; + if (!obj_desc || (obj_desc->common.type != ACPI_TYPE_INTEGER)) { + sub_object_list[3] = sub_object_list[2]; + sub_object_list[2] = obj_desc; + info->return_flags |= ACPI_OBJECT_REPAIRED; + + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "PRT[%X]: Fixed reversed SourceName and SourceIndex", + index)); + } + + /* Point to the next union acpi_operand_object in the top level package */ + + top_object_list++; + } + + return (AE_OK); } /****************************************************************************** @@ -601,6 +623,50 @@ acpi_ns_repair_PSS(struct acpi_evaluate_info *info, /****************************************************************************** * + * FUNCTION: acpi_ns_repair_TSS + * + * PARAMETERS: info - Method execution information block + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list + * descending by the power dissipation values. + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_TSS(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + acpi_status status; + struct acpi_namespace_node *node; + + /* + * We can only sort the _TSS return package if there is no _PSS in the + * same scope. This is because if _PSS is present, the ACPI specification + * dictates that the _TSS Power Dissipation field is to be ignored, and + * therefore some BIOSs leave garbage values in the _TSS Power field(s). + * In this case, it is best to just return the _TSS package as-is. + * (May, 2011) + */ + status = acpi_ns_get_node(info->node, "^_PSS", + ACPI_NS_NO_UPSEARCH, &node); + if (ACPI_SUCCESS(status)) { + return (AE_OK); + } + + status = acpi_ns_check_sorted_list(info, return_object, 5, 1, + ACPI_SORT_DESCENDING, + "PowerDissipation"); + + return (status); +} + +/****************************************************************************** + * * FUNCTION: acpi_ns_check_sorted_list * * PARAMETERS: info - Method execution information block diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 608ebb5..b62a0f4 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -652,8 +652,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, name_found = FALSE; - for (table_index = 0; table_index < 4 && !name_found; - table_index++) { + for (table_index = 0; + table_index < package_element->package.count + && !name_found; table_index++) { if (*sub_object_list && /* Null object allowed */ ((ACPI_TYPE_STRING == (*sub_object_list)->common.type) || diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index f8b55b4..65f3e1c 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -273,17 +273,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, */ user_prt->length = (sizeof(struct acpi_pci_routing_table) - 4); - /* Each element of the top-level package must also be a package */ - - if ((*top_object_list)->common.type != ACPI_TYPE_PACKAGE) { - ACPI_ERROR((AE_INFO, - "(PRT[%u]) Need sub-package, found %s", - index, - acpi_ut_get_object_type_name - (*top_object_list))); - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); - } - /* Each sub-package must be of length 4 */ if ((*top_object_list)->package.count != 4) { @@ -327,22 +316,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, user_prt->pin = (u32) obj_desc->integer.value; /* - * If the BIOS has erroneously reversed the _PRT source_name (index 2) - * and the source_index (index 3), fix it. _PRT is important enough to - * workaround this BIOS error. This also provides compatibility with - * other ACPI implementations. - */ - obj_desc = sub_object_list[3]; - if (!obj_desc || (obj_desc->common.type != ACPI_TYPE_INTEGER)) { - sub_object_list[3] = sub_object_list[2]; - sub_object_list[2] = obj_desc; - - ACPI_WARNING((AE_INFO, - "(PRT[%X].Source) SourceName and SourceIndex are reversed, fixed", - index)); - } - - /* * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object */ -- cgit v0.10.2 From 5a9792f3be74bfad2985b3f4c7afc9e6f6a3f798 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 8 Jun 2013 09:01:07 +0800 Subject: ACPICA: Add several repairs for _CST predefined name Sort list based on the C-state, remove invalid/zero entries. ACPICA BZ 890. Lv Zheng. Fixes these possible problems with the _CST object: 1. Sort the list ascending by C state type. 2. Ensure type cannot be zero. 3. A sub-package count of zero means _CST is meaningless. 4. Count must match the number of C state sub-packages. References: https://bugs.acpica.org/show_bug.cgi?id=890 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 8d59ac2..24b71a0 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -159,9 +159,10 @@ acpi_ns_check_return_value(struct acpi_namespace_node *node, status = acpi_ns_check_package(info, return_object_ptr); if (ACPI_FAILURE(status)) { - /* We might be able to fix an operand type error (_PRT) */ + /* We might be able to fix some errors */ - if (status != AE_AML_OPERAND_TYPE) { + if ((status != AE_AML_OPERAND_TYPE) && + (status != AE_AML_OPERAND_VALUE)) { goto exit; } } diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index aca9bdf..029816e 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -79,6 +79,10 @@ acpi_ns_repair_CID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status +acpi_ns_repair_CST(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr); + +static acpi_status acpi_ns_repair_FDE(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); @@ -101,19 +105,23 @@ acpi_ns_repair_TSS(struct acpi_evaluate_info *info, static acpi_status acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, + u32 start_index, u32 expected_count, u32 sort_index, u8 sort_direction, char *sort_key_name); -static void -acpi_ns_sort_list(union acpi_operand_object **elements, - u32 count, u32 index, u8 sort_direction); - /* Values for sort_direction above */ #define ACPI_SORT_ASCENDING 0 #define ACPI_SORT_DESCENDING 1 +static void +acpi_ns_remove_element(union acpi_operand_object *obj_desc, u32 index); + +static void +acpi_ns_sort_list(union acpi_operand_object **elements, + u32 count, u32 index, u8 sort_direction); + /* * This table contains the names of the predefined methods for which we can * perform more complex repairs. @@ -122,6 +130,7 @@ acpi_ns_sort_list(union acpi_operand_object **elements, * * _ALR: Sort the list ascending by ambient_illuminance * _CID: Strings: uppercase all, remove any leading asterisk + * _CST: Sort the list ascending by C state type * _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs * _HID: Strings: uppercase all, remove any leading asterisk @@ -139,6 +148,7 @@ acpi_ns_sort_list(union acpi_operand_object **elements, static const struct acpi_repair_info acpi_ns_repairable_names[] = { {"_ALR", acpi_ns_repair_ALR}, {"_CID", acpi_ns_repair_CID}, + {"_CST", acpi_ns_repair_CST}, {"_FDE", acpi_ns_repair_FDE}, {"_GTM", acpi_ns_repair_FDE}, /* _GTM has same repair as _FDE */ {"_HID", acpi_ns_repair_HID}, @@ -243,7 +253,7 @@ acpi_ns_repair_ALR(struct acpi_evaluate_info *info, union acpi_operand_object *return_object = *return_object_ptr; acpi_status status; - status = acpi_ns_check_sorted_list(info, return_object, 2, 1, + status = acpi_ns_check_sorted_list(info, return_object, 0, 2, 1, ACPI_SORT_ASCENDING, "AmbientIlluminance"); @@ -411,6 +421,92 @@ acpi_ns_repair_CID(struct acpi_evaluate_info *info, /****************************************************************************** * + * FUNCTION: acpi_ns_repair_CST + * + * PARAMETERS: info - Method execution information block + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _CST object: + * 1. Sort the list ascending by C state type + * 2. Ensure type cannot be zero + * 3. A sub-package count of zero means _CST is meaningless + * 4. Count must match the number of C state sub-packages + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_CST(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + union acpi_operand_object **outer_elements; + u32 outer_element_count; + union acpi_operand_object *obj_desc; + acpi_status status; + u8 removing; + u32 i; + + ACPI_FUNCTION_NAME(ns_repair_CST); + + /* + * Entries (subpackages) in the _CST Package must be sorted by the + * C-state type, in ascending order. + */ + status = acpi_ns_check_sorted_list(info, return_object, 1, 4, 1, + ACPI_SORT_ASCENDING, "C-State Type"); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * We now know the list is correctly sorted by C-state type. Check if + * the C-state type values are proportional. + */ + outer_element_count = return_object->package.count - 1; + i = 0; + while (i < outer_element_count) { + outer_elements = &return_object->package.elements[i + 1]; + removing = FALSE; + + if ((*outer_elements)->package.count == 0) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "SubPackage[%u] - removing entry due to zero count", + i)); + removing = TRUE; + goto remove_element; + } + + obj_desc = (*outer_elements)->package.elements[1]; /* Index1 = Type */ + if ((u32)obj_desc->integer.value == 0) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "SubPackage[%u] - removing entry due to invalid Type(0)", + i)); + removing = TRUE; + } + + remove_element: + if (removing) { + acpi_ns_remove_element(return_object, i + 1); + outer_element_count--; + } else { + i++; + } + } + + /* Update top-level package count, Type "Integer" checked elsewhere */ + + obj_desc = return_object->package.elements[0]; + obj_desc->integer.value = outer_element_count; + return (AE_OK); +} + +/****************************************************************************** + * * FUNCTION: acpi_ns_repair_HID * * PARAMETERS: info - Method execution information block @@ -588,7 +684,7 @@ acpi_ns_repair_PSS(struct acpi_evaluate_info *info, * incorrectly sorted, sort it. We sort by cpu_frequency, since this * should be proportional to the power. */ - status = acpi_ns_check_sorted_list(info, return_object, 6, 0, + status = acpi_ns_check_sorted_list(info, return_object, 0, 6, 0, ACPI_SORT_DESCENDING, "CpuFrequency"); if (ACPI_FAILURE(status)) { @@ -658,7 +754,7 @@ acpi_ns_repair_TSS(struct acpi_evaluate_info *info, return (AE_OK); } - status = acpi_ns_check_sorted_list(info, return_object, 5, 1, + status = acpi_ns_check_sorted_list(info, return_object, 0, 5, 1, ACPI_SORT_DESCENDING, "PowerDissipation"); @@ -671,6 +767,7 @@ acpi_ns_repair_TSS(struct acpi_evaluate_info *info, * * PARAMETERS: info - Method execution information block * return_object - Pointer to the top-level returned object + * start_index - Index of the first sub-package * expected_count - Minimum length of each sub-package * sort_index - Sub-package entry to sort on * sort_direction - Ascending or descending @@ -687,6 +784,7 @@ acpi_ns_repair_TSS(struct acpi_evaluate_info *info, static acpi_status acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, + u32 start_index, u32 expected_count, u32 sort_index, u8 sort_direction, char *sort_key_name) @@ -711,12 +809,14 @@ acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, * Any NULL elements should have been removed by earlier call * to acpi_ns_remove_null_elements. */ - outer_elements = return_object->package.elements; outer_element_count = return_object->package.count; - if (!outer_element_count) { + if (!outer_element_count || start_index >= outer_element_count) { return (AE_AML_PACKAGE_LIMIT); } + outer_elements = &return_object->package.elements[start_index]; + outer_element_count -= start_index; + previous_value = 0; if (sort_direction == ACPI_SORT_DESCENDING) { previous_value = ACPI_UINT32_MAX; @@ -753,7 +853,8 @@ acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, (obj_desc->integer.value < previous_value)) || ((sort_direction == ACPI_SORT_DESCENDING) && (obj_desc->integer.value > previous_value))) { - acpi_ns_sort_list(return_object->package.elements, + acpi_ns_sort_list(&return_object->package. + elements[start_index], outer_element_count, sort_index, sort_direction); @@ -820,3 +921,52 @@ acpi_ns_sort_list(union acpi_operand_object **elements, } } } + +/****************************************************************************** + * + * FUNCTION: acpi_ns_remove_element + * + * PARAMETERS: obj_desc - Package object element list + * index - Index of element to remove + * + * RETURN: None + * + * DESCRIPTION: Remove the requested element of a package and delete it. + * + *****************************************************************************/ + +static void +acpi_ns_remove_element(union acpi_operand_object *obj_desc, u32 index) +{ + union acpi_operand_object **source; + union acpi_operand_object **dest; + u32 count; + u32 new_count; + u32 i; + + ACPI_FUNCTION_NAME(ns_remove_element); + + count = obj_desc->package.count; + new_count = count - 1; + + source = obj_desc->package.elements; + dest = source; + + /* Examine all elements of the package object, remove matched index */ + + for (i = 0; i < count; i++) { + if (i == index) { + acpi_ut_remove_reference(*source); /* Remove one ref for being in pkg */ + acpi_ut_remove_reference(*source); + } else { + *dest = *source; + dest++; + } + source++; + } + + /* NULL terminate list and update the package count */ + + *dest = NULL; + obj_desc->package.count = new_count; +} -- cgit v0.10.2 From 341e7ba1a9a48c50b46a1ebf305823f883c85d4f Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Sat, 8 Jun 2013 09:01:19 +0800 Subject: ACPICA: _CST repair: Handle null package entries Sort package only after null/bad elements have been removed. Fixes a problem where the _CST sort was performed too early. This change sorts the package only after null/bad elements have been removed. Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 029816e..c84603e 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -452,18 +452,7 @@ acpi_ns_repair_CST(struct acpi_evaluate_info *info, ACPI_FUNCTION_NAME(ns_repair_CST); /* - * Entries (subpackages) in the _CST Package must be sorted by the - * C-state type, in ascending order. - */ - status = acpi_ns_check_sorted_list(info, return_object, 1, 4, 1, - ACPI_SORT_ASCENDING, "C-State Type"); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* - * We now know the list is correctly sorted by C-state type. Check if - * the C-state type values are proportional. + * Check if the C-state type values are proportional. */ outer_element_count = return_object->package.count - 1; i = 0; @@ -502,6 +491,17 @@ acpi_ns_repair_CST(struct acpi_evaluate_info *info, obj_desc = return_object->package.elements[0]; obj_desc->integer.value = outer_element_count; + + /* + * Entries (subpackages) in the _CST Package must be sorted by the + * C-state type, in ascending order. + */ + status = acpi_ns_check_sorted_list(info, return_object, 1, 4, 1, + ACPI_SORT_ASCENDING, "C-State Type"); + if (ACPI_FAILURE(status)) { + return (status); + } + return (AE_OK); } -- cgit v0.10.2 From 069189a1c8e897be8c9d8f2365c30a6497100519 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Sat, 8 Jun 2013 09:01:37 +0800 Subject: ACPICA: Update version to 20130517 Version 20130517. Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 5d9bf46..1b09300 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20130418 +#define ACPI_CA_VERSION 0x20130517 #include #include -- cgit v0.10.2 From 994b942fb4eba34013b0b0131265d89d06c907cc Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 20 Jun 2013 08:02:20 +0800 Subject: ACPI: Update MAINTAINERS file to include Documentation/acpi Documentation/acpi contains all of the Docunmentation for the Linux/ACPI subsystem. Adds this to the MAINTAINERS file. Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/MAINTAINERS b/MAINTAINERS index 5be702c..aa0fafd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -242,6 +242,7 @@ F: drivers/acpi/ F: drivers/pnp/pnpacpi/ F: include/linux/acpi.h F: include/acpi/ +F: Documentation/acpi ACPI FAN DRIVER M: Zhang Rui -- cgit v0.10.2 From 89ca78a060a101b21cec46f34ad2ade3fafed0d0 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 20 Jun 2013 08:02:44 +0800 Subject: ACPI: Add sysfs ABI documentation Add initial ABI documentation for ACPI devices' sysfs interfaces. Contacts information fields are filled with current ACPI maintainer and the relevant authors are carbon copied. [rjw: Use my e-mail address that's likely to be valid longer.] Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi new file mode 100644 index 0000000..7fa9cbc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-acpi @@ -0,0 +1,58 @@ +What: /sys/bus/acpi/devices/.../path +Date: December 2006 +Contact: Rafael J. Wysocki +Description: + This attribute indicates the full path of ACPI namespace + object associated with the device object. For example, + \_SB_.PCI0. + This file is not present for device objects representing + fixed ACPI hardware features (like power and sleep + buttons). + +What: /sys/bus/acpi/devices/.../modalias +Date: July 2007 +Contact: Rafael J. Wysocki +Description: + This attribute indicates the PNP IDs of the device object. + That is acpi:HHHHHHHH:[CCCCCCC:]. Where each HHHHHHHH or + CCCCCCCC contains device object's PNPID (_HID or _CID). + +What: /sys/bus/acpi/devices/.../hid +Date: April 2005 +Contact: Rafael J. Wysocki +Description: + This attribute indicates the hardware ID (_HID) of the + device object. For example, PNP0103. + This file is present for device objects having the _HID + control method. + +What: /sys/bus/acpi/devices/.../description +Date: October 2012 +Contact: Rafael J. Wysocki +Description: + This attribute contains the output of the device object's + _STR control method, if present. + +What: /sys/bus/acpi/devices/.../adr +Date: October 2012 +Contact: Rafael J. Wysocki +Description: + This attribute contains the output of the device object's + _ADR control method, which is present for ACPI device + objects representing devices having standard enumeration + algorithms, such as PCI. + +What: /sys/bus/acpi/devices/.../uid +Date: October 2012 +Contact: Rafael J. Wysocki +Description: + This attribute contains the output of the device object's + _UID control method, if present. + +What: /sys/bus/acpi/devices/.../eject +Date: December 2006 +Contact: Rafael J. Wysocki +Description: + Writing 1 to this attribute will trigger hot removal of + this device object. This file exists for every device + object that has _EJ0 method. diff --git a/Documentation/ABI/testing/sysfs-devices-sun b/Documentation/ABI/testing/sysfs-devices-sun index 86be984..625ce4b 100644 --- a/Documentation/ABI/testing/sysfs-devices-sun +++ b/Documentation/ABI/testing/sysfs-devices-sun @@ -1,4 +1,4 @@ -Whatt: /sys/devices/.../sun +What: /sys/devices/.../sun Date: October 2012 Contact: Yasuaki Ishimatsu Description: diff --git a/MAINTAINERS b/MAINTAINERS index aa0fafd..95911af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -243,6 +243,7 @@ F: drivers/pnp/pnpacpi/ F: include/linux/acpi.h F: include/acpi/ F: Documentation/acpi +F: Documentation/ABI/testing/sysfs-bus-acpi ACPI FAN DRIVER M: Zhang Rui -- cgit v0.10.2 From c76911bc6b0aa6280bee01ab01a7c790029c47ef Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Thu, 20 Jun 2013 08:03:13 +0800 Subject: ACPI: Add ACPI namespace documentation ACPI is implemented as a subsystem in Linux, it creates a device tree by mapping specific ACPI namespace objects (Device/Processor/PowerResource/ThermalZone) into Linux device objects. This patch adds documentation for the ACPI device tree. Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/namespace.txt b/Documentation/acpi/namespace.txt new file mode 100644 index 0000000..260f6a3 --- /dev/null +++ b/Documentation/acpi/namespace.txt @@ -0,0 +1,395 @@ +ACPI Device Tree - Representation of ACPI Namespace + +Copyright (C) 2013, Intel Corporation +Author: Lv Zheng + + +Abstract: + +The Linux ACPI subsystem converts ACPI namespace objects into a Linux +device tree under the /sys/devices/LNXSYSTEM:00 and updates it upon +receiving ACPI hotplug notification events. For each device object in this +hierarchy there is a corresponding symbolic link in the +/sys/bus/acpi/devices. +This document illustrates the structure of the ACPI device tree. + + +Credit: + +Thanks for the help from Zhang Rui and Rafael J. +Wysocki . + + +1. ACPI Definition Blocks + + The ACPI firmware sets up RSDP (Root System Description Pointer) in the + system memory address space pointing to the XSDT (Extended System + Description Table). The XSDT always points to the FADT (Fixed ACPI + Description Table) using its first entry, the data within the FADT + includes various fixed-length entries that describe fixed ACPI features + of the hardware. The FADT contains a pointer to the DSDT + (Differentiated System Descripition Table). The XSDT also contains + entries pointing to possibly multiple SSDTs (Secondary System + Description Table). + + The DSDT and SSDT data is organized in data structures called definition + blocks that contain definitions of various objects, including ACPI + control methods, encoded in AML (ACPI Machine Language). The data block + of the DSDT along with the contents of SSDTs represents a hierarchical + data structure called the ACPI namespace whose topology reflects the + structure of the underlying hardware platform. + + The relationships between ACPI System Definition Tables described above + are illustrated in the following diagram. + + +---------+ +-------+ +--------+ +------------------------+ + | RSDP | +->| XSDT | +->| FADT | | +-------------------+ | + +---------+ | +-------+ | +--------+ +-|->| DSDT | | + | Pointer | | | Entry |-+ | ...... | | | +-------------------+ | + +---------+ | +-------+ | X_DSDT |--+ | | Definition Blocks | | + | Pointer |-+ | ..... | | ...... | | +-------------------+ | + +---------+ +-------+ +--------+ | +-------------------+ | + | Entry |------------------|->| SSDT | | + +- - - -+ | +-------------------| | + | Entry | - - - - - - - -+ | | Definition Blocks | | + +- - - -+ | | +-------------------+ | + | | +- - - - - - - - - -+ | + +-|->| SSDT | | + | +-------------------+ | + | | Definition Blocks | | + | +- - - - - - - - - -+ | + +------------------------+ + | + OSPM Loading | + \|/ + +----------------+ + | ACPI Namespace | + +----------------+ + + Figure 1. ACPI Definition Blocks + + NOTE: RSDP can also contain a pointer to the RSDT (Root System + Description Table). Platforms provide RSDT to enable + compatibility with ACPI 1.0 operating systems. The OS is expected + to use XSDT, if present. + + +2. Example ACPI Namespace + + All definition blocks are loaded into a single namespace. The namespace + is a hierarchy of objects identified by names and paths. + The following naming conventions apply to object names in the ACPI + namespace: + 1. All names are 32 bits long. + 2. The first byte of a name must be one of 'A' - 'Z', '_'. + 3. Each of the remaining bytes of a name must be one of 'A' - 'Z', '0' + - '9', '_'. + 4. Names starting with '_' are reserved by the ACPI specification. + 5. The '\' symbol represents the root of the namespace (i.e. names + prepended with '\' are relative to the namespace root). + 6. The '^' symbol represents the parent of the current namespace node + (i.e. names prepended with '^' are relative to the parent of the + current namespace node). + + The figure below shows an example ACPI namespace. + + +------+ + | \ | Root + +------+ + | + | +------+ + +-| _PR | Scope(_PR): the processor namespace + | +------+ + | | + | | +------+ + | +-| CPU0 | Processor(CPU0): the first processor + | +------+ + | + | +------+ + +-| _SB | Scope(_SB): the system bus namespace + | +------+ + | | + | | +------+ + | +-| LID0 | Device(LID0); the lid device + | | +------+ + | | | + | | | +------+ + | | +-| _HID | Name(_HID, "PNP0C0D"): the hardware ID + | | | +------+ + | | | + | | | +------+ + | | +-| _STA | Method(_STA): the status control method + | | +------+ + | | + | | +------+ + | +-| PCI0 | Device(PCI0); the PCI root bridge + | +------+ + | | + | | +------+ + | +-| _HID | Name(_HID, "PNP0A08"): the hardware ID + | | +------+ + | | + | | +------+ + | +-| _CID | Name(_CID, "PNP0A03"): the compatible ID + | | +------+ + | | + | | +------+ + | +-| RP03 | Scope(RP03): the PCI0 power scope + | | +------+ + | | | + | | | +------+ + | | +-| PXP3 | PowerResource(PXP3): the PCI0 power resource + | | +------+ + | | + | | +------+ + | +-| GFX0 | Device(GFX0): the graphics adapter + | +------+ + | | + | | +------+ + | +-| _ADR | Name(_ADR, 0x00020000): the PCI bus address + | | +------+ + | | + | | +------+ + | +-| DD01 | Device(DD01): the LCD output device + | +------+ + | | + | | +------+ + | +-| _BCL | Method(_BCL): the backlight control method + | +------+ + | + | +------+ + +-| _TZ | Scope(_TZ): the thermal zone namespace + | +------+ + | | + | | +------+ + | +-| FN00 | PowerResource(FN00): the FAN0 power resource + | | +------+ + | | + | | +------+ + | +-| FAN0 | Device(FAN0): the FAN0 cooling device + | | +------+ + | | | + | | | +------+ + | | +-| _HID | Name(_HID, "PNP0A0B"): the hardware ID + | | +------+ + | | + | | +------+ + | +-| TZ00 | ThermalZone(TZ00); the FAN thermal zone + | +------+ + | + | +------+ + +-| _GPE | Scope(_GPE): the GPE namespace + +------+ + + Figure 2. Example ACPI Namespace + + +3. Linux ACPI Device Objects + + The Linux kernel's core ACPI subsystem creates struct acpi_device + objects for ACPI namespace objects representing devices, power resources + processors, thermal zones. Those objects are exported to user space via + sysfs as directories in the subtree under /sys/devices/LNXSYSTM:00. The + format of their names is , where 'bus_id' refers to the + ACPI namespace representation of the given object and 'instance' is used + for distinguishing different object of the same 'bus_id' (it is + two-digit decimal representation of an unsigned integer). + + The value of 'bus_id' depends on the type of the object whose name it is + part of as listed in the table below. + + +---+-----------------+-------+----------+ + | | Object/Feature | Table | bus_id | + +---+-----------------+-------+----------+ + | N | Root | xSDT | LNXSYSTM | + +---+-----------------+-------+----------+ + | N | Device | xSDT | _HID | + +---+-----------------+-------+----------+ + | N | Processor | xSDT | LNXCPU | + +---+-----------------+-------+----------+ + | N | ThermalZone | xSDT | LNXTHERM | + +---+-----------------+-------+----------+ + | N | PowerResource | xSDT | LNXPOWER | + +---+-----------------+-------+----------+ + | N | Other Devices | xSDT | device | + +---+-----------------+-------+----------+ + | F | PWR_BUTTON | FADT | LNXPWRBN | + +---+-----------------+-------+----------+ + | F | SLP_BUTTON | FADT | LNXSLPBN | + +---+-----------------+-------+----------+ + | M | Video Extension | xSDT | LNXVIDEO | + +---+-----------------+-------+----------+ + | M | ATA Controller | xSDT | LNXIOBAY | + +---+-----------------+-------+----------+ + | M | Docking Station | xSDT | LNXDOCK | + +---+-----------------+-------+----------+ + + Table 1. ACPI Namespace Objects Mapping + + The following rules apply when creating struct acpi_device objects on + the basis of the contents of ACPI System Description Tables (as + indicated by the letter in the first column and the notation in the + second column of the table above): + N: + The object's source is an ACPI namespace node (as indicated by the + named object's type in the second column). In that case the object's + directory in sysfs will contain the 'path' attribute whose value is + the full path to the node from the namespace root. + struct acpi_device objects are created for the ACPI namespace nodes + whose _STA control methods return PRESENT or FUNCTIONING. The power + resource nodes or nodes without _STA are assumed to be both PRESENT + and FUNCTIONING. + F: + The struct acpi_device object is created for a fixed hardware + feature (as indicated by the fixed feature flag's name in the second + column), so its sysfs directory will not contain the 'path' + attribute. + M: + The struct acpi_device object is created for an ACPI namespace node + with specific control methods (as indicated by the ACPI defined + device's type in the second column). The 'path' attribute containing + its namespace path will be present in its sysfs directory. For + example, if the _BCL method is present for an ACPI namespace node, a + struct acpi_device object with LNXVIDEO 'bus_id' will be created for + it. + + The third column of the above table indicates which ACPI System + Description Tables contain information used for the creation of the + struct acpi_device objects represented by the given row (xSDT means DSDT + or SSDT). + + The forth column of the above table indicates the 'bus_id' generation + rule of the struct acpi_device object: + _HID: + _HID in the last column of the table means that the object's bus_id + is derived from the _HID/_CID identification objects present under + the corresponding ACPI namespace node. The object's sysfs directory + will then contain the 'hid' and 'modalias' attributes that can be + used to retrieve the _HID and _CIDs of that object. + LNXxxxxx: + The 'modalias' attribute is also present for struct acpi_device + objects having bus_id of the "LNXxxxxx" form (pseudo devices), in + which cases it contains the bus_id string itself. + device: + 'device' in the last column of the table indicates that the object's + bus_id cannot be determined from _HID/_CID of the corresponding + ACPI namespace node, although that object represents a device (for + example, it may be a PCI device with _ADR defined and without _HID + or _CID). In that case the string 'device' will be used as the + object's bus_id. + + +4. Linux ACPI Physical Device Glue + + ACPI device (i.e. struct acpi_device) objects may be linked to other + objects in the Linux' device hierarchy that represent "physical" devices + (for example, devices on the PCI bus). If that happens, it means that + the ACPI device object is a "companion" of a device otherwise + represented in a different way and is used (1) to provide configuration + information on that device which cannot be obtained by other means and + (2) to do specific things to the device with the help of its ACPI + control methods. One ACPI device object may be linked this way to + multiple "physical" devices. + + If an ACPI device object is linked to a "physical" device, its sysfs + directory contains the "physical_node" symbolic link to the sysfs + directory of the target device object. In turn, the target device's + sysfs directory will then contain the "firmware_node" symbolic link to + the sysfs directory of the companion ACPI device object. + The linking mechanism relies on device identification provided by the + ACPI namespace. For example, if there's an ACPI namespace object + representing a PCI device (i.e. a device object under an ACPI namespace + object representing a PCI bridge) whose _ADR returns 0x00020000 and the + bus number of the parent PCI bridge is 0, the sysfs directory + representing the struct acpi_device object created for that ACPI + namespace object will contain the 'physical_node' symbolic link to the + /sys/devices/pci0000:00/0000:00:02:0/ sysfs directory of the + corresponding PCI device. + + The linking mechanism is generally bus-specific. The core of its + implementation is located in the drivers/acpi/glue.c file, but there are + complementary parts depending on the bus types in question located + elsewhere. For example, the PCI-specific part of it is located in + drivers/pci/pci-acpi.c. + + +5. Example Linux ACPI Device Tree + + The sysfs hierarchy of struct acpi_device objects corresponding to the + example ACPI namespace illustrated in Figure 2 with the addition of + fixed PWR_BUTTON/SLP_BUTTON devices is shown below. + + +--------------+---+-----------------+ + | LNXSYSTEM:00 | \ | acpi:LNXSYSTEM: | + +--------------+---+-----------------+ + | + | +-------------+-----+----------------+ + +-| LNXPWRBN:00 | N/A | acpi:LNXPWRBN: | + | +-------------+-----+----------------+ + | + | +-------------+-----+----------------+ + +-| LNXSLPBN:00 | N/A | acpi:LNXSLPBN: | + | +-------------+-----+----------------+ + | + | +-----------+------------+--------------+ + +-| LNXCPU:00 | \_PR_.CPU0 | acpi:LNXCPU: | + | +-----------+------------+--------------+ + | + | +-------------+-------+----------------+ + +-| LNXSYBUS:00 | \_SB_ | acpi:LNXSYBUS: | + | +-------------+-------+----------------+ + | | + | | +- - - - - - - +- - - - - - +- - - - - - - -+ + | +-| * PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: | + | | +- - - - - - - +- - - - - - +- - - - - - - -+ + | | + | | +------------+------------+-----------------------+ + | +-| PNP0A08:00 | \_SB_.PCI0 | acpi:PNP0A08:PNP0A03: | + | +------------+------------+-----------------------+ + | | + | | +-----------+-----------------+-----+ + | +-| device:00 | \_SB_.PCI0.RP03 | N/A | + | | +-----------+-----------------+-----+ + | | | + | | | +-------------+----------------------+----------------+ + | | +-| LNXPOWER:00 | \_SB_.PCI0.RP03.PXP3 | acpi:LNXPOWER: | + | | +-------------+----------------------+----------------+ + | | + | | +-------------+-----------------+----------------+ + | +-| LNXVIDEO:00 | \_SB_.PCI0.GFX0 | acpi:LNXVIDEO: | + | +-------------+-----------------+----------------+ + | | + | | +-----------+-----------------+-----+ + | +-| device:01 | \_SB_.PCI0.DD01 | N/A | + | +-----------+-----------------+-----+ + | + | +-------------+-------+----------------+ + +-| LNXSYBUS:01 | \_TZ_ | acpi:LNXSYBUS: | + +-------------+-------+----------------+ + | + | +-------------+------------+----------------+ + +-| LNXPOWER:0a | \_TZ_.FN00 | acpi:LNXPOWER: | + | +-------------+------------+----------------+ + | + | +------------+------------+---------------+ + +-| PNP0C0B:00 | \_TZ_.FAN0 | acpi:PNP0C0B: | + | +------------+------------+---------------+ + | + | +-------------+------------+----------------+ + +-| LNXTHERM:00 | \_TZ_.TZ00 | acpi:LNXTHERM: | + +-------------+------------+----------------+ + + Figure 3. Example Linux ACPI Device Tree + + NOTE: Each node is represented as "object/path/modalias", where: + 1. 'object' is the name of the object's directory in sysfs. + 2. 'path' is the ACPI namespace path of the corresponding + ACPI namespace object, as returned by the object's 'path' + sysfs attribute. + 3. 'modalias' is the value of the object's 'modalias' sysfs + attribute (as described earlier in this document). + NOTE: N/A indicates the device object does not have the 'path' or the + 'modalias' attribute. + NOTE: The PNP0C0D device listed above is highlighted (marked by "*") + to indicate it will be created only when its _STA methods return + PRESENT or FUNCTIONING. -- cgit v0.10.2 From 3afe6dab86b669dd5bcef07b67d3ba7fb12a69a0 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 20 Jun 2013 15:08:55 +0800 Subject: ACPI / video: add description for brightness_switch_enabled Add description for video module's parameter brightness_switch_enabled into kernel-parameters.txt. Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2fe6e76..7f64e0f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3229,6 +3229,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. video= [FB] Frame buffer configuration See Documentation/fb/modedb.txt. + video.brightness_switch_enabled= [0,1] + If set to 1, on receiving an ACPI notify event + generated by hotkey, video driver will adjust brightness + level and then send out the event to user space through + the allocated input device; If set to 0, video driver + will only send out the event without touching backlight + brightness level. + default: 1 + virtio_mmio.device= [VMMIO] Memory mapped virtio (platform) device. -- cgit v0.10.2 From 70e66e4df19167653aba95b4dacbcfd3254a4019 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Fri, 21 Jun 2013 00:15:59 +0200 Subject: ACPI / video: move video_extension.txt to Documentation/acpi ACPI video driver is written according to ACPI spec, appendix B: Video Extensions. So it better be put under the acpi directory instead of the power directory. This patch moves the file there without any other change. Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/video_extension.txt b/Documentation/acpi/video_extension.txt new file mode 100644 index 0000000..b2f9b15 --- /dev/null +++ b/Documentation/acpi/video_extension.txt @@ -0,0 +1,37 @@ +ACPI video extensions +~~~~~~~~~~~~~~~~~~~~~ + +This driver implement the ACPI Extensions For Display Adapters for +integrated graphics devices on motherboard, as specified in ACPI 2.0 +Specification, Appendix B, allowing to perform some basic control like +defining the video POST device, retrieving EDID information or to +setup a video output, etc. Note that this is an ref. implementation +only. It may or may not work for your integrated video device. + +Interfaces exposed to userland through /proc/acpi/video: + +VGA/info : display the supported video bus device capability like Video ROM, CRT/LCD/TV. +VGA/ROM : Used to get a copy of the display devices' ROM data (up to 4k). +VGA/POST_info : Used to determine what options are implemented. +VGA/POST : Used to get/set POST device. +VGA/DOS : Used to get/set ownership of output switching: + Please refer ACPI spec B.4.1 _DOS +VGA/CRT : CRT output +VGA/LCD : LCD output +VGA/TVO : TV output +VGA/*/brightness : Used to get/set brightness of output device + +Notify event through /proc/acpi/event: + +#define ACPI_VIDEO_NOTIFY_SWITCH 0x80 +#define ACPI_VIDEO_NOTIFY_PROBE 0x81 +#define ACPI_VIDEO_NOTIFY_CYCLE 0x82 +#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83 +#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84 + +#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x82 +#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x83 +#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x84 +#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x85 +#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x86 + diff --git a/Documentation/power/video_extension.txt b/Documentation/power/video_extension.txt deleted file mode 100644 index b2f9b15..0000000 --- a/Documentation/power/video_extension.txt +++ /dev/null @@ -1,37 +0,0 @@ -ACPI video extensions -~~~~~~~~~~~~~~~~~~~~~ - -This driver implement the ACPI Extensions For Display Adapters for -integrated graphics devices on motherboard, as specified in ACPI 2.0 -Specification, Appendix B, allowing to perform some basic control like -defining the video POST device, retrieving EDID information or to -setup a video output, etc. Note that this is an ref. implementation -only. It may or may not work for your integrated video device. - -Interfaces exposed to userland through /proc/acpi/video: - -VGA/info : display the supported video bus device capability like Video ROM, CRT/LCD/TV. -VGA/ROM : Used to get a copy of the display devices' ROM data (up to 4k). -VGA/POST_info : Used to determine what options are implemented. -VGA/POST : Used to get/set POST device. -VGA/DOS : Used to get/set ownership of output switching: - Please refer ACPI spec B.4.1 _DOS -VGA/CRT : CRT output -VGA/LCD : LCD output -VGA/TVO : TV output -VGA/*/brightness : Used to get/set brightness of output device - -Notify event through /proc/acpi/event: - -#define ACPI_VIDEO_NOTIFY_SWITCH 0x80 -#define ACPI_VIDEO_NOTIFY_PROBE 0x81 -#define ACPI_VIDEO_NOTIFY_CYCLE 0x82 -#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83 -#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84 - -#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x82 -#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x83 -#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x84 -#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x85 -#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x86 - -- cgit v0.10.2 From 86393865f0c9f7002aa1fc2b8bdce11f3aefcebe Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 20 Jun 2013 15:08:57 +0800 Subject: ACPI / video: update video_extension.txt for backlight control The ACPI video driver has changed a lot, and it doesn't export interfaces in /proc any more, so the documentation for it should be updated. This update focuses on ACPI video driver's backlight control. Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/acpi/video_extension.txt b/Documentation/acpi/video_extension.txt index b2f9b15..78b32ac 100644 --- a/Documentation/acpi/video_extension.txt +++ b/Documentation/acpi/video_extension.txt @@ -8,30 +8,99 @@ defining the video POST device, retrieving EDID information or to setup a video output, etc. Note that this is an ref. implementation only. It may or may not work for your integrated video device. -Interfaces exposed to userland through /proc/acpi/video: - -VGA/info : display the supported video bus device capability like Video ROM, CRT/LCD/TV. -VGA/ROM : Used to get a copy of the display devices' ROM data (up to 4k). -VGA/POST_info : Used to determine what options are implemented. -VGA/POST : Used to get/set POST device. -VGA/DOS : Used to get/set ownership of output switching: - Please refer ACPI spec B.4.1 _DOS -VGA/CRT : CRT output -VGA/LCD : LCD output -VGA/TVO : TV output -VGA/*/brightness : Used to get/set brightness of output device - -Notify event through /proc/acpi/event: - -#define ACPI_VIDEO_NOTIFY_SWITCH 0x80 -#define ACPI_VIDEO_NOTIFY_PROBE 0x81 -#define ACPI_VIDEO_NOTIFY_CYCLE 0x82 -#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83 -#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84 - -#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x82 -#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x83 -#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x84 -#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x85 -#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x86 +The ACPI video driver does 3 things regarding backlight control: +1 Export a sysfs interface for user space to control backlight level + +If the ACPI table has a video device, and acpi_backlight=vendor kernel +command line is not present, the driver will register a backlight device +and set the required backlight operation structure for it for the sysfs +interface control. For every registered class device, there will be a +directory named acpi_videoX under /sys/class/backlight. + +The backlight sysfs interface has a standard definition here: +Documentation/ABI/stable/sysfs-class-backlight. + +And what ACPI video driver does is: +actual_brightness: on read, control method _BQC will be evaluated to +get the brightness level the firmware thinks it is at; +bl_power: not implemented, will set the current brightness instead; +brightness: on write, control method _BCM will run to set the requested +brightness level; +max_brightness: Derived from the _BCL package(see below); +type: firmware + +Note that ACPI video backlight driver will always use index for +brightness, actual_brightness and max_brightness. So if we have +the following _BCL package: + +Method (_BCL, 0, NotSerialized) +{ + Return (Package (0x0C) + { + 0x64, + 0x32, + 0x0A, + 0x14, + 0x1E, + 0x28, + 0x32, + 0x3C, + 0x46, + 0x50, + 0x5A, + 0x64 + }) +} + +The first two levels are for when laptop are on AC or on battery and are +not used by Linux currently. The remaining 10 levels are supported levels +that we can choose from. The applicable index values are from 0 (that +corresponds to the 0x0A brightness value) to 9 (that corresponds to the +0x64 brightness value) inclusive. Each of those index values is regarded +as a "brightness level" indicator. Thus from the user space perspective +the range of available brightness levels is from 0 to 9 (max_brightness) +inclusive. + +2 Notify user space about hotkey event + +There are generally two cases for hotkey event reporting: +i) For some laptops, when user presses the hotkey, a scancode will be + generated and sent to user space through the input device created by + the keyboard driver as a key type input event, with proper remap, the + following key code will appear to user space: + + EV_KEY, KEY_BRIGHTNESSUP + EV_KEY, KEY_BRIGHTNESSDOWN + etc. + +For this case, ACPI video driver does not need to do anything(actually, +it doesn't even know this happened). + +ii) For some laptops, the press of the hotkey will not generate the + scancode, instead, firmware will notify the video device ACPI node + about the event. The event value is defined in the ACPI spec. ACPI + video driver will generate an key type input event according to the + notify value it received and send the event to user space through the + input device it created: + + event keycode + 0x86 KEY_BRIGHTNESSUP + 0x87 KEY_BRIGHTNESSDOWN + etc. + +so this would lead to the same effect as case i) now. + +Once user space tool receives this event, it can modify the backlight +level through the sysfs interface. + +3 Change backlight level in the kernel + +This works for machines covered by case ii) in Section 2. Once the driver +received a notification, it will set the backlight level accordingly. This does +not affect the sending of event to user space, they are always sent to user +space regardless of whether or not the video module controls the backlight level +directly. This behaviour can be controlled through the brightness_switch_enabled +module parameter as documented in kernel-parameters.txt. It is recommended to +disable this behaviour once a GUI environment starts up and wants to have full +control of the backlight level. -- cgit v0.10.2 From d24c2a4f919d17bd1ae4f4010a38ab07ece99cf7 Mon Sep 17 00:00:00 2001 From: Sahara Date: Thu, 20 Jun 2013 11:33:57 +0900 Subject: PM / QoS: correct the valid range of pm_qos_class The valid start index for pm_qos_array is not 0, but PM_QOS_CPU_DMA_LATENCY. There is a null_pm_qos at index 0 of pm_qos_array. However, null_pm_qos is not created as misc device so that inclusion of 0 index for checking pm_qos_class especially for file operations is not proper here. [rjw: Changelog, a bit] Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 587ddde..f2f5f6e 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -477,7 +477,7 @@ static int find_pm_qos_object_by_minor(int minor) { int pm_qos_class; - for (pm_qos_class = 0; + for (pm_qos_class = PM_QOS_CPU_DMA_LATENCY; pm_qos_class < PM_QOS_NUM_CLASSES; pm_qos_class++) { if (minor == pm_qos_array[pm_qos_class]->pm_qos_power_miscdev.minor) @@ -491,7 +491,7 @@ static int pm_qos_power_open(struct inode *inode, struct file *filp) long pm_qos_class; pm_qos_class = find_pm_qos_object_by_minor(iminor(inode)); - if (pm_qos_class >= 0) { + if (pm_qos_class >= PM_QOS_CPU_DMA_LATENCY) { struct pm_qos_request *req = kzalloc(sizeof(*req), GFP_KERNEL); if (!req) return -ENOMEM; @@ -584,7 +584,7 @@ static int __init pm_qos_power_init(void) BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES); - for (i = 1; i < PM_QOS_NUM_CLASSES; i++) { + for (i = PM_QOS_CPU_DMA_LATENCY; i < PM_QOS_NUM_CLASSES; i++) { ret = register_pm_qos_misc(pm_qos_array[i]); if (ret < 0) { printk(KERN_ERR "pm_qos_param: %s setup failed\n", -- cgit v0.10.2 From bb177fedd348c92c2bea6adc9a2163ebff15272e Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Wed, 12 Jun 2013 12:55:22 -0700 Subject: PM / Sleep: Print last wakeup source on failed wakeup_count write Commit a938da06 introduced a useful little log message to tell users/debuggers which wakeup source aborted a suspend. However, this message is only printed if the abort happens during the in-kernel suspend path (after writing /sys/power/state). The full specification of the /sys/power/wakeup_count facility allows user-space power managers to double-check if wakeups have already happened before it actually tries to suspend (e.g. while it was running user-space pre-suspend hooks), by writing the last known wakeup_count value to /sys/power/wakeup_count. This patch changes the sysfs handler for that node to also print said log message if that write fails, so that we can figure out the offending wakeup source for both kinds of suspend aborts. Signed-off-by: Julius Werner Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 407a2ef..2d56f41 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -659,7 +659,7 @@ void pm_wakeup_event(struct device *dev, unsigned int msec) } EXPORT_SYMBOL_GPL(pm_wakeup_event); -static void print_active_wakeup_sources(void) +void pm_print_active_wakeup_sources(void) { struct wakeup_source *ws; int active = 0; @@ -683,6 +683,7 @@ static void print_active_wakeup_sources(void) last_activity_ws->name); rcu_read_unlock(); } +EXPORT_SYMBOL_GPL(pm_print_active_wakeup_sources); /** * pm_wakeup_pending - Check if power transition in progress should be aborted. @@ -709,7 +710,7 @@ bool pm_wakeup_pending(void) if (ret) { pr_info("PM: Wakeup pending, aborting suspend\n"); - print_active_wakeup_sources(); + pm_print_active_wakeup_sources(); } return ret; diff --git a/include/linux/suspend.h b/include/linux/suspend.h index d4e3f16..f73cabf 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -363,6 +363,7 @@ extern bool pm_wakeup_pending(void); extern bool pm_get_wakeup_count(unsigned int *count, bool block); extern bool pm_save_wakeup_count(unsigned int count); extern void pm_wakep_autosleep_enabled(bool set); +extern void pm_print_active_wakeup_sources(void); static inline void lock_system_sleep(void) { diff --git a/kernel/power/main.c b/kernel/power/main.c index d77663b..0828070 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -424,6 +424,8 @@ static ssize_t wakeup_count_store(struct kobject *kobj, if (sscanf(buf, "%u", &val) == 1) { if (pm_save_wakeup_count(val)) error = n; + else + pm_print_active_wakeup_sources(); } out: -- cgit v0.10.2 From 95731ebb114c5f0c028459388560fc2a72fe5049 Mon Sep 17 00:00:00 2001 From: Xiaoguang Chen Date: Wed, 19 Jun 2013 15:00:07 +0800 Subject: cpufreq: Fix governor start/stop race condition Cpufreq governors' stop and start operations should be carried out in sequence. Otherwise, there will be unexpected behavior, like in the example below. Suppose there are 4 CPUs and policy->cpu=CPU0, CPU1/2/3 are linked to CPU0. The normal sequence is: 1) Current governor is userspace. An application tries to set the governor to ondemand. It will call __cpufreq_set_policy() in which it will stop the userspace governor and then start the ondemand governor. 2) Current governor is userspace. The online of CPU3 runs on CPU0. It will call cpufreq_add_policy_cpu() in which it will first stop the userspace governor, and then start it again. If the sequence of the above two cases interleaves, it becomes: 1) Application stops userspace governor 2) Hotplug stops userspace governor which is a problem, because the governor shouldn't be stopped twice in a row. What happens next is: 3) Application starts ondemand governor 4) Hotplug starts a governor In step 4, the hotplug is supposed to start the userspace governor, but now the governor has been changed by the application to ondemand, so the ondemand governor is started once again, which is incorrect. The solution is to prevent policy governors from being stopped multiple times in a row. A governor should only be stopped once for one policy. After it has been stopped, no more governor stop operations should be executed. Also add a mutex to serialize governor operations. [rjw: Changelog. And you owe me a beverage of my choice.] Signed-off-by: Xiaoguang Chen Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index f8c2860..43cf608 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -49,6 +49,7 @@ static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif static DEFINE_RWLOCK(cpufreq_driver_lock); +static DEFINE_MUTEX(cpufreq_governor_lock); /* * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure @@ -1635,6 +1636,21 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, pr_debug("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event); + + mutex_lock(&cpufreq_governor_lock); + if ((!policy->governor_enabled && (event == CPUFREQ_GOV_STOP)) || + (policy->governor_enabled && (event == CPUFREQ_GOV_START))) { + mutex_unlock(&cpufreq_governor_lock); + return -EBUSY; + } + + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = false; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = true; + + mutex_unlock(&cpufreq_governor_lock); + ret = policy->governor->governor(policy, event); if (!ret) { @@ -1642,6 +1658,14 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, policy->governor->initialized++; else if (event == CPUFREQ_GOV_POLICY_EXIT) policy->governor->initialized--; + } else { + /* Restore original values */ + mutex_lock(&cpufreq_governor_lock); + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = true; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = false; + mutex_unlock(&cpufreq_governor_lock); } /* we keep one module reference alive for diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index d939056..125719d 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -111,6 +111,7 @@ struct cpufreq_policy { unsigned int policy; /* see above */ struct cpufreq_governor *governor; /* see below */ void *governor_data; + bool governor_enabled; /* governor start/stop flag */ struct work_struct update; /* if update_policy() needs to be * called, but you're in IRQ context */ -- cgit v0.10.2 From bb176f7d038fee4d46b3293e64e173bfb05ab7b5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:19:33 +0530 Subject: cpufreq: Fix minor formatting issues There were a few noticeable formatting issues in core cpufreq code. This cleans them up to make code look better. The changes include: - Whitespace cleanup. - Rearrangements of code. - Multiline comments fixes. - Formatting changes to fit 80 columns. Copyright information in cpufreq.c is also updated to include my name for 2013. [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 43cf608..075edef 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -3,6 +3,7 @@ * * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski + * (C) 2013 Viresh Kumar * * Oct 2005 - Ashok Raj * Added handling for CPU hotplug @@ -12,7 +13,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -44,12 +44,13 @@ */ static struct cpufreq_driver *cpufreq_driver; static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); +static DEFINE_RWLOCK(cpufreq_driver_lock); +static DEFINE_MUTEX(cpufreq_governor_lock); + #ifdef CONFIG_HOTPLUG_CPU /* This one keeps track of the previously set governor of a removed CPU */ static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif -static DEFINE_RWLOCK(cpufreq_driver_lock); -static DEFINE_MUTEX(cpufreq_governor_lock); /* * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure @@ -199,7 +200,6 @@ static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) if (!try_module_get(cpufreq_driver->owner)) goto err_out_unlock; - /* get the CPU */ data = per_cpu(cpufreq_cpu_data, cpu); @@ -269,7 +269,7 @@ static void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data) */ #ifndef CONFIG_SMP static unsigned long l_p_j_ref; -static unsigned int l_p_j_ref_freq; +static unsigned int l_p_j_ref_freq; static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { @@ -282,7 +282,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) pr_debug("saving %lu as reference value for loops_per_jiffy; " "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq); } - if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || + if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new); @@ -297,7 +297,6 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) } #endif - void __cpufreq_notify_transition(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, unsigned int state) { @@ -343,6 +342,7 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy, break; } } + /** * cpufreq_notify_transition - call notifier chain and adjust_jiffies * on frequency transition. @@ -360,7 +360,6 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy, EXPORT_SYMBOL_GPL(cpufreq_notify_transition); - /********************************************************************* * SYSFS INTERFACE * *********************************************************************/ @@ -425,7 +424,6 @@ out: return err; } - /** * cpufreq_per_cpu_attr_read() / show_##file_name() - * print out cpufreq information @@ -490,7 +488,6 @@ static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, return sprintf(buf, "%u\n", cur_freq); } - /** * show_scaling_governor - show the current policy for the specified CPU */ @@ -506,7 +503,6 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) return -EINVAL; } - /** * store_scaling_governor - store policy for the specified CPU */ @@ -529,8 +525,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, &new_policy.governor)) return -EINVAL; - /* Do not use cpufreq_set_policy here or the user_policy.max - will be wrongly overridden */ + /* + * Do not use cpufreq_set_policy here or the user_policy.max + * will be wrongly overridden + */ ret = __cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; @@ -1094,7 +1092,8 @@ static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) * Caller should already have policy_rwsem in write mode for this CPU. * This routine frees the rwsem before returning. */ -static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) +static int __cpufreq_remove_dev(struct device *dev, + struct subsys_interface *sif) { unsigned int cpu = dev->id, ret, cpus; unsigned long flags; @@ -1201,7 +1200,6 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif return 0; } - static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) { unsigned int cpu = dev->id; @@ -1214,7 +1212,6 @@ static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) return retval; } - static void handle_update(struct work_struct *work) { struct cpufreq_policy *policy = @@ -1225,7 +1222,8 @@ static void handle_update(struct work_struct *work) } /** - * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble. + * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're + * in deep trouble. * @cpu: cpu number * @old_freq: CPU frequency the kernel thinks the CPU runs at * @new_freq: CPU frequency the CPU actually runs at @@ -1240,7 +1238,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, struct cpufreq_freqs freqs; unsigned long flags; - pr_debug("Warning: CPU frequency out of sync: cpufreq and timing " "core thinks of %u, is %u kHz.\n", old_freq, new_freq); @@ -1255,7 +1252,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); } - /** * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur * @cpu: CPU number @@ -1301,7 +1297,6 @@ unsigned int cpufreq_quick_get_max(unsigned int cpu) } EXPORT_SYMBOL(cpufreq_quick_get_max); - static unsigned int __cpufreq_get(unsigned int cpu) { struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); @@ -1360,7 +1355,6 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; - /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1497,11 +1491,10 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) } EXPORT_SYMBOL(cpufreq_register_notifier); - /** * cpufreq_unregister_notifier - unregister a driver with cpufreq * @nb: notifier block to be unregistered - * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER * * Remove a driver from the CPU frequency notifier list. * @@ -1537,7 +1530,6 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * GOVERNORS * *********************************************************************/ - int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -1678,7 +1670,6 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, return ret; } - int cpufreq_register_governor(struct cpufreq_governor *governor) { int err; @@ -1703,7 +1694,6 @@ int cpufreq_register_governor(struct cpufreq_governor *governor) } EXPORT_SYMBOL_GPL(cpufreq_register_governor); - void cpufreq_unregister_governor(struct cpufreq_governor *governor) { #ifdef CONFIG_HOTPLUG_CPU @@ -1733,7 +1723,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor) EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); - /********************************************************************* * POLICY INTERFACE * *********************************************************************/ @@ -1762,7 +1751,6 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) } EXPORT_SYMBOL(cpufreq_get_policy); - /* * data : current policy. * policy : policy to be set. @@ -1796,8 +1784,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, blocking_notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_INCOMPATIBLE, policy); - /* verify the cpu speed can be set within this limit, - which might be different to the first one */ + /* + * verify the cpu speed can be set within this limit, which might be + * different to the first one + */ ret = cpufreq_driver->verify(policy); if (ret) goto error_out; @@ -1899,8 +1889,10 @@ int cpufreq_update_policy(unsigned int cpu) policy.policy = data->user_policy.policy; policy.governor = data->user_policy.governor; - /* BIOS might change freq behind our back - -> ask driver for current freq and notify governors about a change */ + /* + * BIOS might change freq behind our back + * -> ask driver for current freq and notify governors about a change + */ if (cpufreq_driver->get) { policy.cur = cpufreq_driver->get(cpu); if (!data->cur) { @@ -1949,7 +1941,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, } static struct notifier_block __refdata cpufreq_cpu_notifier = { - .notifier_call = cpufreq_cpu_callback, + .notifier_call = cpufreq_cpu_callback, }; /********************************************************************* @@ -1961,7 +1953,7 @@ static struct notifier_block __refdata cpufreq_cpu_notifier = { * @driver_data: A struct cpufreq_driver containing the values# * submitted by the CPU Frequency driver. * - * Registers a CPU Frequency driver to this core code. This code + * Registers a CPU Frequency driver to this core code. This code * returns zero on success, -EBUSY when another driver got here first * (and isn't unregistered in the meantime). * @@ -2028,11 +2020,10 @@ err_null_driver: } EXPORT_SYMBOL_GPL(cpufreq_register_driver); - /** * cpufreq_unregister_driver - unregister the current CPUFreq driver * - * Unregister the current CPUFreq driver. Only call this if you have + * Unregister the current CPUFreq driver. Only call this if you have * the right to do so, i.e. if you have succeeded in initialising before! * Returns zero if successful, and -EINVAL if the cpufreq_driver is * currently not initialised. diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index e7bbf76..6663ec3 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -81,7 +81,7 @@ static ssize_t show_##file_name##_gov_sys \ return sprintf(buf, "%u\n", tuners->file_name); \ } \ \ -static ssize_t show_##file_name##_gov_pol \ +static ssize_t show_##file_name##_gov_pol \ (struct cpufreq_policy *policy, char *buf) \ { \ struct dbs_data *dbs_data = policy->governor_data; \ @@ -91,7 +91,7 @@ static ssize_t show_##file_name##_gov_pol \ #define store_one(_gov, file_name) \ static ssize_t store_##file_name##_gov_sys \ -(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ +(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ { \ struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \ return store_##file_name(dbs_data, buf, count); \ diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c index ceee068..9fef7d6 100644 --- a/drivers/cpufreq/cpufreq_performance.c +++ b/drivers/cpufreq/cpufreq_performance.c @@ -17,7 +17,6 @@ #include #include - static int cpufreq_governor_performance(struct cpufreq_policy *policy, unsigned int event) { @@ -44,19 +43,16 @@ struct cpufreq_governor cpufreq_gov_performance = { .owner = THIS_MODULE, }; - static int __init cpufreq_gov_performance_init(void) { return cpufreq_register_governor(&cpufreq_gov_performance); } - static void __exit cpufreq_gov_performance_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_performance); } - MODULE_AUTHOR("Dominik Brodowski "); MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c index 2d948a1..32109a1 100644 --- a/drivers/cpufreq/cpufreq_powersave.c +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -1,7 +1,7 @@ /* - * linux/drivers/cpufreq/cpufreq_powersave.c + * linux/drivers/cpufreq/cpufreq_powersave.c * - * Copyright (C) 2002 - 2003 Dominik Brodowski + * Copyright (C) 2002 - 2003 Dominik Brodowski * * * This program is free software; you can redistribute it and/or modify @@ -48,13 +48,11 @@ static int __init cpufreq_gov_powersave_init(void) return cpufreq_register_governor(&cpufreq_gov_powersave); } - static void __exit cpufreq_gov_powersave_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_powersave); } - MODULE_AUTHOR("Dominik Brodowski "); MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index fb65dec..6d35caa 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -27,7 +27,7 @@ static spinlock_t cpufreq_stats_lock; struct cpufreq_stats { unsigned int cpu; unsigned int total_trans; - unsigned long long last_time; + unsigned long long last_time; unsigned int max_state; unsigned int state_num; unsigned int last_index; @@ -116,7 +116,7 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", stat->freq_table[i]); - for (j = 0; j < stat->state_num; j++) { + for (j = 0; j < stat->state_num; j++) { if (len >= PAGE_SIZE) break; len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 5dc77b7..0307809 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -55,7 +55,6 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) return ret; } - static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) { return sprintf(buf, "%u\n", policy->cur); @@ -101,7 +100,6 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, return rc; } - #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE static #endif @@ -118,13 +116,11 @@ static int __init cpufreq_gov_userspace_init(void) return cpufreq_register_governor(&cpufreq_gov_userspace); } - static void __exit cpufreq_gov_userspace_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_userspace); } - MODULE_AUTHOR("Dominik Brodowski , " "Russell King "); MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 125719d..3c7ee2f 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -1,8 +1,8 @@ /* - * linux/include/linux/cpufreq.h + * linux/include/linux/cpufreq.h * - * Copyright (C) 2001 Russell King - * (C) 2002 - 2003 Dominik Brodowski + * Copyright (C) 2001 Russell King + * (C) 2002 - 2003 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,7 +26,6 @@ /* Print length for names. Extra 1 space for accomodating '\n' in prints */ #define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1) - /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ @@ -153,17 +152,18 @@ struct cpufreq_freqs { u8 flags; /* flags of cpufreq_driver, see below. */ }; - /** - * cpufreq_scale - "old * mult / div" calculation for large values (32-bit-arch safe) + * cpufreq_scale - "old * mult / div" calculation for large values (32-bit-arch + * safe) * @old: old value * @div: divisor * @mult: multiplier * * - * new = old * mult / div + * new = old * mult / div */ -static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mult) +static inline unsigned long cpufreq_scale(unsigned long old, u_int div, + u_int mult) { #if BITS_PER_LONG == 32 @@ -216,14 +216,12 @@ extern int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); - extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); - /********************************************************************* * CPUFREQ DRIVER INTERFACE * *********************************************************************/ @@ -234,7 +232,7 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor); struct freq_attr; struct cpufreq_driver { - struct module *owner; + struct module *owner; char name[CPUFREQ_NAME_LEN]; u8 flags; /* @@ -282,11 +280,11 @@ struct cpufreq_driver { int cpufreq_register_driver(struct cpufreq_driver *driver_data); int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); - void cpufreq_notify_transition(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, unsigned int state); -static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max) +static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, + unsigned int min, unsigned int max) { if (policy->min < min) policy->min = min; @@ -349,7 +347,9 @@ bool have_governor_per_policy(void); struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy); #ifdef CONFIG_CPU_FREQ -/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ +/* + * query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it + */ unsigned int cpufreq_get(unsigned int cpu); #else static inline unsigned int cpufreq_get(unsigned int cpu) @@ -358,7 +358,9 @@ static inline unsigned int cpufreq_get(unsigned int cpu) } #endif -/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ +/* + * query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it + */ #ifdef CONFIG_CPU_FREQ unsigned int cpufreq_quick_get(unsigned int cpu); unsigned int cpufreq_quick_get_max(unsigned int cpu); @@ -373,16 +375,14 @@ static inline unsigned int cpufreq_quick_get_max(unsigned int cpu) } #endif - /********************************************************************* * CPUFREQ DEFAULT GOVERNOR * *********************************************************************/ - /* - Performance governor is fallback governor if any other gov failed to - auto load due latency restrictions -*/ + * Performance governor is fallback governor if any other gov failed to auto + * load due latency restrictions + */ #ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE extern struct cpufreq_governor cpufreq_gov_performance; #endif @@ -402,7 +402,6 @@ extern struct cpufreq_governor cpufreq_gov_conservative; #define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_conservative) #endif - /********************************************************************* * FREQUENCY TABLE HELPERS * *********************************************************************/ -- cgit v0.10.2 From 0956df9c842a534b0b36f62f3a0fdb5fca19dc96 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:19:34 +0530 Subject: cpufreq: make __cpufreq_notify_transition() static __cpufreq_notify_transition() is used only in cpufreq.c, make it static. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 075edef..d976e22 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -297,7 +297,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) } #endif -void __cpufreq_notify_transition(struct cpufreq_policy *policy, +static void __cpufreq_notify_transition(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, unsigned int state) { BUG_ON(irqs_disabled()); -- cgit v0.10.2 From 73e797f79e5edb3d000d1911a2d859f15c446c1a Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Fri, 21 Jun 2013 17:09:18 +0800 Subject: Documentation / CPU hotplug: Rephrase the outdated description for MADT entries More than 256 entries in ACPI MADT is supported from ACPI 3.0, so the information in should be Documentation/cpu-hotplug.txt updated. [rjw: Changelog] Suggested-by: Rafael J. Wysocki Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 9f40135..67f733d 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -370,8 +370,10 @@ A: There is no clear spec defined way from ACPI that can give us that CPUs in MADT as hotpluggable CPUS. In the case there are no disabled CPUS we assume 1/2 the number of CPUs currently present can be hotplugged. - Caveat: Today's ACPI MADT can only provide 256 entries since the apicid field - in MADT is only 8 bits. + Caveat: ACPI MADT can only provide 256 entries in systems with only ACPI 2.0c + or earlier ACPI version supported, because the apicid field in MADT is only + 8 bits. From ACPI 3.0, this limitation was removed since the apicid field + was extended to 32 bits with x2APIC introduced. User Space Notification -- cgit v0.10.2 From d30b82a46942cda5c0af3744142a650db0732a7c Mon Sep 17 00:00:00 2001 From: "lan,Tianyu" Date: Fri, 21 Jun 2013 10:09:15 +0800 Subject: PM / QoS: Update Documentation/power/pm_qos_interface.txt Update PM QoS documentation after recent changes. [rjw: Changelog] Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index 79a2a58..4836320 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -7,7 +7,7 @@ one of the parameters. Two different PM QoS frameworks are available: 1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput. 2. the per-device PM QoS framework provides the API to manage the per-device latency -constraints. +constraints and PM QoS flags. Each parameters have defined units: * latency: usec @@ -86,13 +86,17 @@ To remove the user mode request for a target value simply close the device node. -2. PM QoS per-device latency framework +2. PM QoS per-device latency and flags framework + +For each device, there are two lists of PM QoS requests. One is maintained +along with the aggregated target of latency value and the other is for PM QoS +flags. Values are updated in response to changes of the request list. + +Target latency value is simply the minimum of the request values held in the +parameter list elements. The PM QoS flags aggregate value is a gather (bitwise +OR) of all list elements' values. Two device PM QoS flags are defined currently: +PM_QOS_FLAG_NO_POWER_OFF and PM_QOS_FLAG_REMOTE_WAKEUP. -For each device a list of performance requests is maintained along with -an aggregated target value. The aggregated target value is updated with -changes to the request list or elements of the list. Typically the -aggregated target value is simply the max or min of the request values held -in the parameter list elements. Note: the aggregated target value is implemented as an atomic variable so that reading the aggregated value does not require any locking mechanism. @@ -119,6 +123,38 @@ the request. s32 dev_pm_qos_read_value(device): Returns the aggregated value for a given device's constraints list. +enum pm_qos_flags_status dev_pm_qos_flags(device, mask) +Check PM QoS flags of the given device against the given mask of flags. +The meaning of the return values is as follows: + PM_QOS_FLAGS_ALL: All flags from the mask are set + PM_QOS_FLAGS_SOME: Some flags from the mask are set + PM_QOS_FLAGS_NONE: No flags from the mask are set + PM_QOS_FLAGS_UNDEFINED: The device's PM QoS structure has not been + initialized or the list of requests is empty. + +int dev_pm_qos_add_ancestor_request(dev, handle, value) +Add a PM QoS request for the first direct ancestor of the given device whose +power.ignore_children flag is unset. + +int dev_pm_qos_expose_latency_limit(device, value) +Add a request to the device's PM QoS list of latency constraints and create +a sysfs attribute pm_qos_resume_latency_us under the device's power directory +allowing user space to manipulate that request. + +void dev_pm_qos_hide_latency_limit(device) +Drop the request added by dev_pm_qos_expose_latency_limit() from the device's +PM QoS list of latency constraints and remove sysfs attribute pm_qos_resume_latency_us +from the device's power directory. + +int dev_pm_qos_expose_flags(device, value) +Add a request to the device's PM QoS list of flags and create sysfs attributes +pm_qos_no_power_off and pm_qos_remote_wakeup under the device's power directory +allowing user space to change these flags' value. + +void dev_pm_qos_hide_flags(device) +Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list +of flags and remove sysfs attributes pm_qos_no_power_off and pm_qos_remote_wakeup +under the device's power directory. Notification mechanisms: The per-device PM QoS framework has 2 different and distinct notification trees: -- cgit v0.10.2 From 166b9addd83aaf6eb22d9db7dc015f81913c9a0e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sun, 23 Jun 2013 01:08:25 +0200 Subject: cpufreq: s3c2416: fix forgotten driver_data conversions Commit 5070158804b5 (cpufreq: rename index as driver_data in cpufreq_frequency_table) renamed the index field to driver_data. But it seems some uses in the s3c2416 driver were forgotten. So convert the last index users to read driver_data. Signed-off-by: Heiko Stuebner Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 4f1881e..f123314 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -312,7 +312,7 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; - dvfs = &s3c2416_dvfs_table[freq->index]; + dvfs = &s3c2416_dvfs_table[freq->driver_data]; found = 0; /* Check only the min-voltage, more is always ok on S3C2416 */ @@ -462,7 +462,7 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) freq = s3c_freq->freq_table; while (freq->frequency != CPUFREQ_TABLE_END) { /* special handling for dvs mode */ - if (freq->index == 0) { + if (freq->driver_data == 0) { if (!s3c_freq->hclk) { pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", freq->frequency); -- cgit v0.10.2 From 86d6725a572d08e5e709871a77a7df137adf5ad4 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Mon, 24 Jun 2013 15:36:33 +0800 Subject: ACPI / processor: Remove unused macros in processor_driver.c ACPI_PROCESSOR_FILE_INFO, ACPI_PROCESSOR_FILE_THROTTLING and ACPI_PROCESSOR_FILE_LIMIT are used for procfs, but this feature was removed in commit d09fe555 (ACPI processor: remove deprecated ACPI procfs I/F) long ago. So, these macros should also be removed. ACPI_PROCESSOR_LIMIT_USER and ACPI_PROCESSOR_LIMIT_THERMAL are not used by any code, remove them too. Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index d93963f..823be116 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -43,16 +43,10 @@ #define PREFIX "ACPI: " -#define ACPI_PROCESSOR_FILE_INFO "info" -#define ACPI_PROCESSOR_FILE_THROTTLING "throttling" -#define ACPI_PROCESSOR_FILE_LIMIT "limit" #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 -#define ACPI_PROCESSOR_LIMIT_USER 0 -#define ACPI_PROCESSOR_LIMIT_THERMAL 1 - #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_driver"); -- cgit v0.10.2 From 247e9ee034b0448a585afa16e292cbb9dc0aef68 Mon Sep 17 00:00:00 2001 From: Sahara Date: Fri, 21 Jun 2013 11:12:28 +0900 Subject: PM / QoS: Add pm_qos_update_target/flags tracepoints This patch adds tracepoints to pm_qos_update_target and pm_qos_update_flags. It's useful for checking pm qos action, previous value and current value. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki diff --git a/include/trace/events/power.h b/include/trace/events/power.h index 427acab..f1e73bd 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -5,6 +5,7 @@ #define _TRACE_POWER_H #include +#include #include DECLARE_EVENT_CLASS(cpu, @@ -177,6 +178,56 @@ DEFINE_EVENT(power_domain, power_domain_target, TP_ARGS(name, state, cpu_id) ); + +/* + * The pm qos events are used for pm qos update + */ +DECLARE_EVENT_CLASS(pm_qos_update, + + TP_PROTO(enum pm_qos_req_action action, int prev_value, int curr_value), + + TP_ARGS(action, prev_value, curr_value), + + TP_STRUCT__entry( + __field( enum pm_qos_req_action, action ) + __field( int, prev_value ) + __field( int, curr_value ) + ), + + TP_fast_assign( + __entry->action = action; + __entry->prev_value = prev_value; + __entry->curr_value = curr_value; + ), + + TP_printk("action=%s prev_value=%d curr_value=%d", + __print_symbolic(__entry->action, + { PM_QOS_ADD_REQ, "ADD_REQ" }, + { PM_QOS_UPDATE_REQ, "UPDATE_REQ" }, + { PM_QOS_REMOVE_REQ, "REMOVE_REQ" }), + __entry->prev_value, __entry->curr_value) +); + +DEFINE_EVENT(pm_qos_update, pm_qos_update_target, + + TP_PROTO(enum pm_qos_req_action action, int prev_value, int curr_value), + + TP_ARGS(action, prev_value, curr_value) +); + +DEFINE_EVENT_PRINT(pm_qos_update, pm_qos_update_flags, + + TP_PROTO(enum pm_qos_req_action action, int prev_value, int curr_value), + + TP_ARGS(action, prev_value, curr_value), + + TP_printk("action=%s prev_value=0x%x curr_value=0x%x", + __print_symbolic(__entry->action, + { PM_QOS_ADD_REQ, "ADD_REQ" }, + { PM_QOS_UPDATE_REQ, "UPDATE_REQ" }, + { PM_QOS_REMOVE_REQ, "REMOVE_REQ" }), + __entry->prev_value, __entry->curr_value) +); #endif /* _TRACE_POWER_H */ /* This part must be outside protection */ diff --git a/kernel/power/qos.c b/kernel/power/qos.c index f2f5f6e..4fb8d14 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -44,6 +44,7 @@ #include #include +#include /* * locking rule: all changes to constraints or notifiers lists @@ -202,6 +203,7 @@ int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, spin_unlock_irqrestore(&pm_qos_lock, flags); + trace_pm_qos_update_target(action, prev_value, curr_value); if (prev_value != curr_value) { blocking_notifier_call_chain(c->notifiers, (unsigned long)curr_value, @@ -272,6 +274,7 @@ bool pm_qos_update_flags(struct pm_qos_flags *pqf, spin_unlock_irqrestore(&pm_qos_lock, irqflags); + trace_pm_qos_update_flags(action, prev_value, curr_value); return prev_value != curr_value; } -- cgit v0.10.2 From ae8822b842e229fa4459fca2d979b630d812311d Mon Sep 17 00:00:00 2001 From: Sahara Date: Fri, 21 Jun 2013 11:12:29 +0900 Subject: PM / QoS: Add pm_qos_request tracepoints Adds tracepoints to pm_qos_add_request, pm_qos_update_request, pm_qos_remove_request, and pm_qos_update_request_timeout. It's useful for checking pm_qos_class, value, and timeout_us. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki diff --git a/include/trace/events/power.h b/include/trace/events/power.h index f1e73bd..6411f92 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -182,6 +182,77 @@ DEFINE_EVENT(power_domain, power_domain_target, /* * The pm qos events are used for pm qos update */ +DECLARE_EVENT_CLASS(pm_qos_request, + + TP_PROTO(int pm_qos_class, s32 value), + + TP_ARGS(pm_qos_class, value), + + TP_STRUCT__entry( + __field( int, pm_qos_class ) + __field( s32, value ) + ), + + TP_fast_assign( + __entry->pm_qos_class = pm_qos_class; + __entry->value = value; + ), + + TP_printk("pm_qos_class=%s value=%d", + __print_symbolic(__entry->pm_qos_class, + { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }, + { PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" }, + { PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }), + __entry->value) +); + +DEFINE_EVENT(pm_qos_request, pm_qos_add_request, + + TP_PROTO(int pm_qos_class, s32 value), + + TP_ARGS(pm_qos_class, value) +); + +DEFINE_EVENT(pm_qos_request, pm_qos_update_request, + + TP_PROTO(int pm_qos_class, s32 value), + + TP_ARGS(pm_qos_class, value) +); + +DEFINE_EVENT(pm_qos_request, pm_qos_remove_request, + + TP_PROTO(int pm_qos_class, s32 value), + + TP_ARGS(pm_qos_class, value) +); + +TRACE_EVENT(pm_qos_update_request_timeout, + + TP_PROTO(int pm_qos_class, s32 value, unsigned long timeout_us), + + TP_ARGS(pm_qos_class, value, timeout_us), + + TP_STRUCT__entry( + __field( int, pm_qos_class ) + __field( s32, value ) + __field( unsigned long, timeout_us ) + ), + + TP_fast_assign( + __entry->pm_qos_class = pm_qos_class; + __entry->value = value; + __entry->timeout_us = timeout_us; + ), + + TP_printk("pm_qos_class=%s value=%d, timeout_us=%ld", + __print_symbolic(__entry->pm_qos_class, + { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }, + { PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" }, + { PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }), + __entry->value, __entry->timeout_us) +); + DECLARE_EVENT_CLASS(pm_qos_update, TP_PROTO(enum pm_qos_req_action action, int prev_value, int curr_value), diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 4fb8d14..06fe285 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -336,6 +336,7 @@ void pm_qos_add_request(struct pm_qos_request *req, } req->pm_qos_class = pm_qos_class; INIT_DELAYED_WORK(&req->work, pm_qos_work_fn); + trace_pm_qos_add_request(pm_qos_class, value); pm_qos_update_target(pm_qos_array[pm_qos_class]->constraints, &req->node, PM_QOS_ADD_REQ, value); } @@ -364,6 +365,7 @@ void pm_qos_update_request(struct pm_qos_request *req, cancel_delayed_work_sync(&req->work); + trace_pm_qos_update_request(req->pm_qos_class, new_value); if (new_value != req->node.prio) pm_qos_update_target( pm_qos_array[req->pm_qos_class]->constraints, @@ -390,6 +392,8 @@ void pm_qos_update_request_timeout(struct pm_qos_request *req, s32 new_value, cancel_delayed_work_sync(&req->work); + trace_pm_qos_update_request_timeout(req->pm_qos_class, + new_value, timeout_us); if (new_value != req->node.prio) pm_qos_update_target( pm_qos_array[req->pm_qos_class]->constraints, @@ -419,6 +423,7 @@ void pm_qos_remove_request(struct pm_qos_request *req) cancel_delayed_work_sync(&req->work); + trace_pm_qos_remove_request(req->pm_qos_class, PM_QOS_DEFAULT_VALUE); pm_qos_update_target(pm_qos_array[req->pm_qos_class]->constraints, &req->node, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE); -- cgit v0.10.2 From 96d9d0b5dc17e80cefbd7c5be15a5072d33513f8 Mon Sep 17 00:00:00 2001 From: Sahara Date: Fri, 21 Jun 2013 11:12:30 +0900 Subject: PM / QoS: Add dev_pm_qos_request tracepoints Adds tracepoints to dev_pm_qos_add_request, dev_pm_qos_update_request, and dev_pm_qos_remove_request. It's useful for checking device name, dev_pm_qos_request_type, and value. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 71671c4..5c1361a 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "power.h" @@ -305,6 +306,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, else if (!dev->power.qos) ret = dev_pm_qos_constraints_allocate(dev); + trace_dev_pm_qos_add_request(dev_name(dev), type, value); if (!ret) { req->dev = dev; req->type = type; @@ -349,6 +351,8 @@ static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req, return -EINVAL; } + trace_dev_pm_qos_update_request(dev_name(req->dev), req->type, + new_value); if (curr_value != new_value) ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value); @@ -398,6 +402,8 @@ static int __dev_pm_qos_remove_request(struct dev_pm_qos_request *req) if (IS_ERR_OR_NULL(req->dev->power.qos)) return -ENODEV; + trace_dev_pm_qos_remove_request(dev_name(req->dev), req->type, + PM_QOS_DEFAULT_VALUE); ret = apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE); memset(req, 0, sizeof(*req)); return ret; diff --git a/include/trace/events/power.h b/include/trace/events/power.h index 6411f92..8e42410 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -299,6 +299,57 @@ DEFINE_EVENT_PRINT(pm_qos_update, pm_qos_update_flags, { PM_QOS_REMOVE_REQ, "REMOVE_REQ" }), __entry->prev_value, __entry->curr_value) ); + +DECLARE_EVENT_CLASS(dev_pm_qos_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value), + + TP_STRUCT__entry( + __string( name, name ) + __field( enum dev_pm_qos_req_type, type ) + __field( s32, new_value ) + ), + + TP_fast_assign( + __assign_str(name, name); + __entry->type = type; + __entry->new_value = new_value; + ), + + TP_printk("device=%s type=%s new_value=%d", + __get_str(name), + __print_symbolic(__entry->type, + { DEV_PM_QOS_LATENCY, "DEV_PM_QOS_LATENCY" }, + { DEV_PM_QOS_FLAGS, "DEV_PM_QOS_FLAGS" }), + __entry->new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_add_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_update_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_remove_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); #endif /* _TRACE_POWER_H */ /* This part must be outside protection */ -- cgit v0.10.2 From f5ce1572109049b90484e2bb44927cb6034c5eb1 Mon Sep 17 00:00:00 2001 From: Sahara Date: Fri, 21 Jun 2013 11:12:31 +0900 Subject: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt Add PM QOS events section and description to events-power.txt. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt index e1498ff..3bd33b8 100644 --- a/Documentation/trace/events-power.txt +++ b/Documentation/trace/events-power.txt @@ -63,3 +63,34 @@ power_domain_target "%s state=%lu cpu_id=%lu" The first parameter gives the power domain name (e.g. "mpu_pwrdm"). The second parameter is the power domain target state. +4. PM QoS events +================ +The PM QoS events are used for QoS add/update/remove request and for +target/flags update. + +pm_qos_add_request "pm_qos_class=%s value=%d" +pm_qos_update_request "pm_qos_class=%s value=%d" +pm_qos_remove_request "pm_qos_class=%s value=%d" +pm_qos_update_request_timeout "pm_qos_class=%s value=%d, timeout_us=%ld" + +The first parameter gives the QoS class name (e.g. "CPU_DMA_LATENCY"). +The second parameter is value to be added/updated/removed. +The third parameter is timeout value in usec. + +pm_qos_update_target "action=%s prev_value=%d curr_value=%d" +pm_qos_update_flags "action=%s prev_value=0x%x curr_value=0x%x" + +The first parameter gives the QoS action name (e.g. "ADD_REQ"). +The second parameter is the previous QoS value. +The third parameter is the current QoS value to update. + +And, there are also events used for device PM QoS add/update/remove request. + +dev_pm_qos_add_request "device=%s type=%s new_value=%d" +dev_pm_qos_update_request "device=%s type=%s new_value=%d" +dev_pm_qos_remove_request "device=%s type=%s new_value=%d" + +The first parameter gives the device name which tries to add/update/remove +QoS requests. +The second parameter gives the request type (e.g. "DEV_PM_QOS_LATENCY"). +The third parameter is value to be added/updated/removed. -- cgit v0.10.2 From e15d8309e961ea960dbe40f94fd7ac64f8efe3f6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:22:55 +0530 Subject: cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that the sequence of calling notifiers is complete. This patch fixes it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 0d25677..1f9849d 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -494,12 +494,14 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, pr_debug("acpi_cpufreq_target failed (%d)\n", policy->cpu); result = -EAGAIN; - goto out; + freqs.new = freqs.old; } } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - perf->state = next_perf_state; + + if (!result) + perf->state = next_perf_state; out: return result; -- cgit v0.10.2 From 567f4f6727bccf729fb2c55c9da29c787bb1b583 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:22:59 +0530 Subject: cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old. This driver does take care of it, but the POSTCHANGE is called with freqs.new on errors too, which is incorrect, so fix it. [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 324aff2..a60efae 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -161,6 +161,9 @@ postchange: current_multiplier); } #endif + if (err) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return err; } -- cgit v0.10.2 From f77f146599146ddc19e0454170c06ddff75bc81f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:23:03 +0530 Subject: cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that the sequence of calling notifiers is complete. This patch fixes it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 0de0008..1581fcc 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -243,6 +243,8 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy, return 0; cmd_incomplete: + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); iowrite16(0, &pcch_hdr->status); spin_unlock(&pcc_lock); return -EINVAL; -- cgit v0.10.2 From 7f77a563f0c110a633b4ab0fec9f49d41630039a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 14:23:04 +0530 Subject: cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e. either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 51343a1..78f018f 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -967,9 +967,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, res = transition_fid_vid(data, fid, vid); if (res) - return res; - - freqs.new = find_khz_freq_from_fid(data->currfid); + freqs.new = freqs.old; + else + freqs.new = find_khz_freq_from_fid(data->currfid); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return res; -- cgit v0.10.2 From 3d69dd50517f4a1c037298ac4af85aae1d070879 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. This also removes code setting policy->cur as this is also done by POSTCHANGE notifier. Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 5d7f53f..3549f07 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -84,11 +84,9 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); if (ret) { pr_err("clk_set_rate failed: %d\n", ret); - return ret; + freqs.new = freqs.old; } - policy->cur = freqs.new; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; -- cgit v0.10.2 From f20b97d9faed5b5e0c57fcf921297a92723a85da Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. Davinci driver was taking care of it but frequency isn't restored to freqs.old. This patch fixes it. Acked-by: Sekhar Nori Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index c33c76c..551dd65 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -114,6 +114,9 @@ static int davinci_target(struct cpufreq_policy *policy, pdata->set_voltage(idx); out: + if (ret) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; -- cgit v0.10.2 From 803c126af699602561a3ddb1814354993e4395b6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Acked-by: Linus Walleij Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 6ec6539..1fdb02b 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -57,13 +57,13 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy, if (ret) { pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n", freqs.new * 1000, ret); - return ret; + freqs.new = freqs.old; } /* post change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) -- cgit v0.10.2 From c3aca6b1ce17a2e866788bc2bd40e25ef6e5ba58 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Cc: Kukjin Kim Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 475b4f6..0d32f02 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -113,7 +113,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } @@ -123,14 +124,19 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, safe_arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } exynos_info->set_freq(old_index, index); +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto out; + /* When the new frequency is lower than current frequency */ if ((freqs.new < freqs.old) || ((freqs.new > freqs.old) && safe_arm_volt)) { -- cgit v0.10.2 From 5a571c352db1eb0aa6325d71807bb40b972faa3b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. This also moves PRECHANGE notifier down so that we call it just before starting frequency transition. Acked-by: Shawn Guo Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index b78bc35..e37cdae 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -68,8 +68,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -86,13 +84,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old / 1000, freqs.new / 1000, volt / 1000); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (freqs.new > freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_err(cpu_dev, "failed to scale vddarm up: %d\n", ret); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* @@ -145,15 +146,18 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* scaling down? scale voltage after frequency */ if (freqs.new < freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); - if (ret) + if (ret) { dev_warn(cpu_dev, "failed to scale vddarm down: %d\n", ret); + ret = 0; + } if (freqs.old == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, @@ -163,9 +167,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, } } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static int imx6q_cpufreq_init(struct cpufreq_policy *policy) -- cgit v0.10.2 From 44a49a23c97d9442f4eafe011913897c77bd3075 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. Omap driver was taking care of it well, but wasn't restoring freqs.new to freqs.old in some cases. I wasn't required to add code for it as moving PRECHANGE notifier down was a better option, so that we call it just before starting frequency transition. Acked-by: Santosh Shilimkar Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 0279d18..29468a5 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -93,9 +93,6 @@ static int omap_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new && policy->cur == freqs.new) return ret; - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - freq = freqs.new * 1000; ret = clk_round_rate(mpu_clk, freq); if (IS_ERR_VALUE(ret)) { @@ -125,6 +122,9 @@ static int omap_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old ? volt_old / 1000 : -1, freqs.new / 1000, volt ? volt / 1000 : -1); + /* notifiers */ + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (mpu_reg && (freqs.new > freqs.old)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); -- cgit v0.10.2 From 6cdc9ef32c62d3863c922300b00ef29718f06593 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Cc: Mark Brown Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb5..017ade0 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -104,7 +104,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) { pr_err("Failed to set VDDARM for %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; + goto post_notify; } } #endif @@ -113,10 +114,13 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret < 0) { pr_err("Failed to set rate %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto err; #ifdef CONFIG_REGULATOR if (vddarm && freqs.new < freqs.old) { -- cgit v0.10.2 From f56cc99e3f189ce214408e9c0fdda9e664d83dc1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Acked-by: Stephen Warren Signed-off-by: Viresh Kumar diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index c74c0e1..e74d777 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -138,12 +138,12 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, if (ret) { pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", freqs.new); - return ret; + freqs.new = freqs.old; } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned long tegra_cpu_highest_speed(void) -- cgit v0.10.2 From 09d5ca804e796a20dbc50be0971b9e89e692c256 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Tue, 25 Jun 2013 10:06:45 +0800 Subject: ACPI / processor: Drop unused variable from processor_perflib.c The count variable in acpi_processor_preregister_performance() is only initalized as 1 for one CPU and incremented when another CPU sharing the same dependency domain is found. It isn't referenced anywhere else, so drop it. Signed-off-by: Lan Tianyu Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index e854582..1e9732d 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -639,7 +639,7 @@ end: int acpi_processor_preregister_performance( struct acpi_processor_performance __percpu *performance) { - int count, count_target; + int count_target; int retval = 0; unsigned int i, j; cpumask_var_t covered_cpus; @@ -711,7 +711,6 @@ int acpi_processor_preregister_performance( /* Validate the Domain info */ count_target = pdomain->num_processors; - count = 1; if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) @@ -745,7 +744,6 @@ int acpi_processor_preregister_performance( cpumask_set_cpu(j, covered_cpus); cpumask_set_cpu(j, pr->performance->shared_cpu_map); - count++; } for_each_possible_cpu(j) { -- cgit v0.10.2 From 2fa97feb4406c546b52e35b6b6c50cb8f63425d2 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 5 Jun 2013 02:27:50 +0000 Subject: ACPI: Add CMOS RTC Operation Region handler support On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy Signed-off-by: Lan Tianyu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 536562c..97c949a 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -43,6 +43,7 @@ acpi-y += acpi_platform.o acpi-y += power.o acpi-y += event.o acpi-y += sysfs.o +acpi-$(CONFIG_X86) += acpi_cmos_rtc.o acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o diff --git a/drivers/acpi/acpi_cmos_rtc.c b/drivers/acpi/acpi_cmos_rtc.c new file mode 100644 index 0000000..84190ed --- /dev/null +++ b/drivers/acpi/acpi_cmos_rtc.c @@ -0,0 +1,92 @@ +/* + * ACPI support for CMOS RTC Address Space access + * + * Copyright (C) 2013, Intel Corporation + * Authors: Lan Tianyu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include "internal.h" + +#define PREFIX "ACPI: " + +ACPI_MODULE_NAME("cmos rtc"); + +static const struct acpi_device_id acpi_cmos_rtc_ids[] = { + { "PNP0B00" }, + { "PNP0B01" }, + { "PNP0B02" }, + {} +}; + +static acpi_status +acpi_cmos_rtc_space_handler(u32 function, acpi_physical_address address, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + int i; + u8 *value = (u8 *)&value64; + + if (address > 0xff || !value64) + return AE_BAD_PARAMETER; + + if (function != ACPI_WRITE && function != ACPI_READ) + return AE_BAD_PARAMETER; + + spin_lock_irq(&rtc_lock); + + for (i = 0; i < DIV_ROUND_UP(bits, 8); ++i, ++address, ++value) + if (function == ACPI_READ) + *value = CMOS_READ(address); + else + CMOS_WRITE(*value, address); + + spin_unlock_irq(&rtc_lock); + + return AE_OK; +} + +static int acpi_install_cmos_rtc_space_handler(struct acpi_device *adev, + const struct acpi_device_id *id) +{ + acpi_status status; + + status = acpi_install_address_space_handler(adev->handle, + ACPI_ADR_SPACE_CMOS, + &acpi_cmos_rtc_space_handler, + NULL, NULL); + if (ACPI_FAILURE(status)) { + pr_err(PREFIX "Error installing CMOS-RTC region handler\n"); + return -ENODEV; + } + + return 0; +} + +static void acpi_remove_cmos_rtc_space_handler(struct acpi_device *adev) +{ + if (ACPI_FAILURE(acpi_remove_address_space_handler(adev->handle, + ACPI_ADR_SPACE_CMOS, &acpi_cmos_rtc_space_handler))) + pr_err(PREFIX "Error removing CMOS-RTC region handler\n"); +} + +static struct acpi_scan_handler cmos_rtc_handler = { + .ids = acpi_cmos_rtc_ids, + .attach = acpi_install_cmos_rtc_space_handler, + .detach = acpi_remove_cmos_rtc_space_handler, +}; + +void __init acpi_cmos_rtc_init(void) +{ + acpi_scan_add_handler(&cmos_rtc_handler); +} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 297cbf4..4163d4b 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -45,6 +45,11 @@ void acpi_memory_hotplug_init(void); #else static inline void acpi_memory_hotplug_init(void) {} #endif +#ifdef CONFIG_X86 +void acpi_cmos_rtc_init(void); +#else +static inline void acpi_cmos_rtc_init(void) {} +#endif void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug, const char *name); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b14ac46..a514be2 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2040,6 +2040,7 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); + acpi_cmos_rtc_init(); acpi_container_init(); acpi_memory_hotplug_init(); -- cgit v0.10.2 From eff9a4b62b14cf0d9913e3caf1f26f8b7a6105c9 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 5 Jun 2013 02:27:51 +0000 Subject: ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's _REG method will access that region. To allow the CMOS RTC region handler to be installed before the EC _REG method is first invoked, add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy Signed-off-by: Lan Tianyu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index edc0081..80403c1 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -983,6 +983,10 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { ec_enlarge_storm_threshold, "CLEVO hardware", { DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL}, + { + ec_skip_dsdt_scan, "HP Folio 13", { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13"),}, NULL}, {}, }; -- cgit v0.10.2 From 10619066a353f27fe3700a448fa2b21643687840 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 23 May 2013 10:27:46 +0300 Subject: ACPI: implement acpi_os_get_timer() according the spec ACPI Timer() opcode should return monotonically increasing clock with 100ns granularity according the ACPI 5.0 spec. Testing the current Timer() implementation with following ASL code (and an additional debug print in acpi_os_sleep() to get the sleep times dumped out to dmesg): // Test: 10ms Store(Timer, Local1) Sleep(10) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test: 200ms Store(Timer, Local1) Sleep(200) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test 1300ms Store(Timer, Local1) Sleep(1300) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) The second sleep value is calculated using Timer(). If the implementation is good enough we should be able to get the second value pretty close to the first. However, the current Timer() gives pretty bad sleep times: [ 11.488100] ACPI: acpi_os_get_timer() TBD [ 11.492150] ACPI: Sleep(10) [ 11.502993] ACPI: Sleep(0) [ 11.506315] ACPI: Sleep(200) [ 11.706237] ACPI: Sleep(0) [ 11.709550] ACPI: Sleep(1300) [ 13.008929] ACPI: Sleep(0) Fix this with the help of ktime_get(). Once the fix is applied and run against the same ASL code we get: [ 11.486786] ACPI: Sleep(10) [ 11.499029] ACPI: Sleep(12) [ 11.512350] ACPI: Sleep(200) [ 11.712282] ACPI: Sleep(200) [ 11.912170] ACPI: Sleep(1300) [ 13.211577] ACPI: Sleep(1300) That is much more closer to the values we expected. Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e721863..c290769 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -835,19 +835,9 @@ void acpi_os_stall(u32 us) */ u64 acpi_os_get_timer(void) { - static u64 t; - -#ifdef CONFIG_HPET - /* TBD: use HPET if available */ -#endif - -#ifdef CONFIG_X86_PM_TIMER - /* TBD: default to PM timer if HPET was not available */ -#endif - if (!t) - printk(KERN_ERR PREFIX "acpi_os_get_timer() TBD\n"); - - return ++t; + u64 time_ns = ktime_to_ns(ktime_get()); + do_div(time_ns, 100); + return time_ns; } acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width) -- cgit v0.10.2 From 7c30ed532cf798a8d924562f2f44d03d7652f7a7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 10:16:55 +0530 Subject: cpufreq: make sure frequency transitions are serialized Whenever we are changing frequency of a cpu, we are calling PRECHANGE and POSTCHANGE notifiers. They must be serialized. i.e. PRECHANGE or POSTCHANGE shouldn't be called twice contiguously. This can happen due to bugs in users of __cpufreq_driver_target() or actual cpufreq drivers who are sending these notifiers. This patch adds some protection against this. Now, we keep track of the last transaction and see if something went wrong. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d976e22..03b3b69 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -312,6 +312,12 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy, switch (state) { case CPUFREQ_PRECHANGE: + if (WARN(policy->transition_ongoing, + "In middle of another frequency transition\n")) + return; + + policy->transition_ongoing = true; + /* detect if the driver reported a value as "old frequency" * which is not equal to what the cpufreq core thinks is * "old frequency". @@ -331,6 +337,12 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy, break; case CPUFREQ_POSTCHANGE: + if (WARN(!policy->transition_ongoing, + "No frequency transition in progress\n")) + return; + + policy->transition_ongoing = false; + adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new, (unsigned long)freqs->cpu); @@ -1539,6 +1551,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, if (cpufreq_disabled()) return -ENODEV; + if (policy->transition_ongoing) + return -EBUSY; /* Make sure that target_freq is within supported range */ if (target_freq > policy->max) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 3c7ee2f..c0bc737 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -119,6 +119,7 @@ struct cpufreq_policy { struct kobject kobj; struct completion kobj_unregister; + bool transition_ongoing; /* Tracks transition status */ }; #define CPUFREQ_ADJUST (0) -- cgit v0.10.2 From f4fd3797848aa04e72e942c855fd279840a47fe4 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 27 Jun 2013 15:08:54 +0800 Subject: acpi-cpufreq: Add new sysfs attribute freqdomain_cpus Commits fcf8058 (cpufreq: Simplify cpufreq_add_dev()) and aa77a52 (cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()) changed the contents of the "related_cpus" sysfs attribute on systems where acpi-cpufreq is used and user space can't get the list of CPUs which are in the same hardware coordination CPU domain (provided by the ACPI AML method _PSD) via "related_cpus" any more. To make up for that loss add a new sysfs attribute "freqdomian_cpus" for the acpi-cpufreq driver which exposes the list of CPUs in the same domain regardless of whether it is coordinated by hardware or software. [rjw: Changelog, documentation] References: https://bugzilla.kernel.org/show_bug.cgi?id=58761 Reported-by: Jean-Philippe Halimi Signed-off-by: Lan Tianyu Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2447698..468e4d4 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -144,6 +144,21 @@ Description: Discover and change clock speed of CPUs to learn how to control the knobs. +What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus +Date: June 2013 +Contact: cpufreq@vger.kernel.org +Description: Discover CPUs in the same CPU frequency coordination domain + + freqdomain_cpus is the list of CPUs (online+offline) that share + the same clock/freq domain (possibly at the hardware level). + That information may be hidden from the cpufreq core and the + value of related_cpus may be different from freqdomain_cpus. This + attribute is useful for user space DVFS controllers to get better + power/performance results for platforms using acpi-cpufreq. + + This file is only present if the acpi-cpufreq driver is in use. + + What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1} Date: August 2008 KernelVersion: 2.6.27 diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 2c5906d..403dad6 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -70,6 +70,7 @@ struct acpi_cpufreq_data { struct cpufreq_frequency_table *freq_table; unsigned int resume; unsigned int cpu_feature; + cpumask_var_t freqdomain_cpus; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); @@ -176,6 +177,15 @@ static struct global_attr global_boost = __ATTR(boost, 0644, show_global_boost, store_global_boost); +static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + + return cpufreq_show_cpus(data->freqdomain_cpus, buf); +} + +cpufreq_freq_attr_ro(freqdomain_cpus); + #ifdef CONFIG_X86_ACPI_CPUFREQ_CPB static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, size_t count) @@ -704,6 +714,11 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (!data) return -ENOMEM; + if (!zalloc_cpumask_var(&data->freqdomain_cpus, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free; + } + data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); per_cpu(acfreq_data, cpu) = data; @@ -712,7 +727,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) result = acpi_processor_register_performance(data->acpi_data, cpu); if (result) - goto err_free; + goto err_free_mask; perf = data->acpi_data; policy->shared_type = perf->shared_type; @@ -725,6 +740,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { cpumask_copy(policy->cpus, perf->shared_cpu_map); } + cpumask_copy(data->freqdomain_cpus, perf->shared_cpu_map); #ifdef CONFIG_SMP dmi_check_system(sw_any_bug_dmi_table); @@ -736,6 +752,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) { cpumask_clear(policy->cpus); cpumask_set_cpu(cpu, policy->cpus); + cpumask_copy(data->freqdomain_cpus, cpu_sibling_mask(cpu)); policy->shared_type = CPUFREQ_SHARED_TYPE_HW; pr_info_once(PFX "overriding BIOS provided _PSD data\n"); } @@ -870,6 +887,8 @@ err_freqfree: kfree(data->freq_table); err_unreg: acpi_processor_unregister_performance(perf, cpu); +err_free_mask: + free_cpumask_var(data->freqdomain_cpus); err_free: kfree(data); per_cpu(acfreq_data, cpu) = NULL; @@ -888,6 +907,7 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) per_cpu(acfreq_data, policy->cpu) = NULL; acpi_processor_unregister_performance(data->acpi_data, policy->cpu); + free_cpumask_var(data->freqdomain_cpus); kfree(data->freq_table); kfree(data); } @@ -908,6 +928,7 @@ static int acpi_cpufreq_resume(struct cpufreq_policy *policy) static struct freq_attr *acpi_cpufreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, + &freqdomain_cpus, NULL, /* this is a placeholder for cpb, do not remove */ NULL, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 03b3b69..6a015ad 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -585,7 +585,7 @@ out: return i; } -static ssize_t show_cpus(const struct cpumask *mask, char *buf) +ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf) { ssize_t i = 0; unsigned int cpu; @@ -600,6 +600,7 @@ static ssize_t show_cpus(const struct cpumask *mask, char *buf) i += sprintf(&buf[i], "\n"); return i; } +EXPORT_SYMBOL_GPL(cpufreq_show_cpus); /** * show_related_cpus - show the CPUs affected by each transition even if @@ -607,7 +608,7 @@ static ssize_t show_cpus(const struct cpumask *mask, char *buf) */ static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) { - return show_cpus(policy->related_cpus, buf); + return cpufreq_show_cpus(policy->related_cpus, buf); } /** @@ -615,7 +616,7 @@ static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) */ static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) { - return show_cpus(policy->cpus, buf); + return cpufreq_show_cpus(policy->cpus, buf); } static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index c0bc737..4d7390b 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -439,4 +439,7 @@ void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, void cpufreq_frequency_table_update_policy_cpu(struct cpufreq_policy *policy); void cpufreq_frequency_table_put_attr(unsigned int cpu); + +ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf); + #endif /* _LINUX_CPUFREQ_H */ -- cgit v0.10.2 From 419e172145cf6c51d436a8bf4afcd17511f0ff79 Mon Sep 17 00:00:00 2001 From: Jacob Shin Date: Thu, 27 Jun 2013 22:02:12 +0200 Subject: cpufreq: don't leave stale policy pointer in cdbs->cur_policy Clear ->cur_policy when stopping a governor, or the ->cur_policy pointer may be stale on systems with have_governor_per_policy when a new policy is allocated due to CPU hotplug offline/online. [rjw: Changelog] Suggested-by: Viresh Kumar Signed-off-by: Jacob Shin Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index a849b2d..4645876 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -366,6 +366,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, mutex_lock(&dbs_data->mutex); mutex_destroy(&cpu_cdbs->timer_mutex); + cpu_cdbs->cur_policy = NULL; mutex_unlock(&dbs_data->mutex); -- cgit v0.10.2 From 9dceefe483d7640ba0bbf3e53d1db880e7469aba Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 26 Jun 2013 16:27:35 -0600 Subject: PM / Sleep: Warn about system time after resume with pm_trace pm_trace uses the system's Real Time Clock (RTC) to save the magic number. The reason for this is that the RTC is the only reliably available piece of hardware during resume operations where a value can be set that will survive a reboot. Consequence is that after a resume (even if it is successful) your system clock will have a value corresponding to the magic number instead of the correct date/time! It is therefore advisable to use a program like ntp-date or rdate to reset the correct date/time from an external time source when using this trace option. There is no run-time message to warn users of the consequences of enabling pm_trace. Adding a warning message to pm_trace_store() will serve as a reminder to users to set the system date and time after resume. Signed-off-by: Shuah Khan Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/main.c b/kernel/power/main.c index 0828070..1d1bf63 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -530,6 +530,10 @@ pm_trace_store(struct kobject *kobj, struct kobj_attribute *attr, if (sscanf(buf, "%d", &val) == 1) { pm_trace_enabled = !!val; + if (pm_trace_enabled) { + pr_warn("PM: Enabling pm_trace changes system date and time during resume.\n" + "PM: Correct system time has to be restored manually after resume.\n"); + } return n; } return -EINVAL; -- cgit v0.10.2 From 9b5c7a5a977a330ffaf83c4d383ba247c74c800f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 27 Jun 2013 14:01:02 +0200 Subject: ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() After commit fa1675b (ACPI / PM: Rework and clean up acpi_dev_pm_get_state()) a NULL pointer dereference will take place if NULL is passed to acpi_pm_device_sleep_state() as the second argument. Fix that by avoiding to use the pointer that may be NULL until it's necessary to store a return value at the location pointed to by it (if not NULL). Reported-and-tested-by: Aaron Lu Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index fd363b5..4c56dc8 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -521,7 +521,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; - int ret, d_max; + int ret, d_min, d_max; if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) return -EINVAL; @@ -540,19 +540,23 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) } ret = acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(), - d_min_p, &d_max); + &d_min, &d_max); if (ret) return ret; - if (d_max_in < *d_min_p) + if (d_max_in < d_min) return -EINVAL; if (d_max > d_max_in) { - for (d_max = d_max_in; d_max > *d_min_p; d_max--) { + for (d_max = d_max_in; d_max > d_min; d_max--) { if (adev->power.states[d_max].flags.valid) break; } } + + if (d_min_p) + *d_min_p = d_min; + return d_max; } EXPORT_SYMBOL(acpi_pm_device_sleep_state); -- cgit v0.10.2 From f51e1eb63d9c28cec188337ee656a13be6980cfd Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 1 Jul 2013 00:40:55 +0200 Subject: cpufreq: Fix cpufreq regression after suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Toralf Förster reported that the cpufreq ondemand governor behaves erratically (doesn't scale well) after a suspend/resume cycle. The problem was that the cpufreq subsystem's idea of the cpu frequencies differed from the actual frequencies set in the hardware after a suspend/resume cycle. Toralf bisected the problem to commit a66b2e5 (cpufreq: Preserve sysfs files across suspend/resume). Among other (harmless) things, that commit skipped the call to cpufreq_update_policy() in the resume path. But cpufreq_update_policy() plays an important role during resume, because it is responsible for checking if the BIOS changed the cpu frequencies behind our back and resynchronize the cpufreq subsystem's knowledge of the cpu frequencies, and update them accordingly. So, restore the call to cpufreq_update_policy() in the resume path to fix the cpufreq regression. Reported-and-tested-by: Toralf Förster Signed-off-by: Srivatsa S. Bhat Cc: 3.10+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 6d35caa..cd9e817 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -349,6 +349,7 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: + case CPU_ONLINE_FROZEN: cpufreq_update_policy(cpu); break; case CPU_DOWN_PREPARE: -- cgit v0.10.2