From 666cbe342622c959ad95515918a1c1f8210c93f2 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 28 Jun 2009 23:50:08 -0700 Subject: Input: dm355evm_keys - use threaded IRQs Convert the dm355evm keys driver to use IRQ threading instead of a private workqueue. IRQ threads were added to Linux after this driver was written, and in this case fit what the driver needs. (Although the non-shared thread costs more runtime memory.) Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index a63315c..0918aca 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -23,30 +23,16 @@ * pressed, or its autorepeat kicks in, an event is sent. This driver * read those events from the small (32 event) queue and reports them. * - * Because we communicate with the MSP430 using I2C, and all I2C calls - * in Linux sleep, we need to cons up a kind of threaded IRQ handler - * using a work_struct. The IRQ is active low, but we use it through - * the GPIO controller so we can trigger on falling edges. - * * Note that physically there can only be one of these devices. * * This driver was tested with firmware revision A4. */ struct dm355evm_keys { - struct work_struct work; struct input_dev *input; struct device *dev; int irq; }; -static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) -{ - struct dm355evm_keys *keys = _keys; - - schedule_work(&keys->work); - return IRQ_HANDLED; -} - /* These initial keycodes can be remapped by dm355evm_setkeycode(). */ static struct { u16 event; @@ -110,13 +96,12 @@ static struct { { 0x3169, KEY_PAUSE, }, }; -static void dm355evm_keys_work(struct work_struct *work) +/* runs in an IRQ thread -- can (and will!) sleep */ +static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) { - struct dm355evm_keys *keys; + struct dm355evm_keys *keys = _keys; int status; - keys = container_of(work, struct dm355evm_keys, work); - /* For simplicity we ignore INPUT_COUNT and just read * events until we get the "queue empty" indicator. * Reading INPUT_LOW decrements the count. @@ -183,6 +168,19 @@ static void dm355evm_keys_work(struct work_struct *work) input_report_key(keys->input, keycode, 0); input_sync(keys->input); } + return IRQ_HANDLED; +} + +/* + * Because we communicate with the MSP430 using I2C, and all I2C calls + * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is + * active low, but we go through the GPIO controller so we can trigger + * on falling edges and not worry about enabling/disabling the IRQ in + * the keypress handling path. + */ +static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys) +{ + return IRQ_WAKE_THREAD; } static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode) @@ -233,7 +231,6 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) keys->dev = &pdev->dev; keys->input = input; - INIT_WORK(&keys->work, dm355evm_keys_work); /* set up "threaded IRQ handler" */ status = platform_get_irq(pdev, 0); @@ -260,9 +257,10 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev) /* REVISIT: flush the event queue? */ - status = request_irq(keys->irq, dm355evm_keys_irq, - IRQF_TRIGGER_FALLING, - dev_name(&pdev->dev), keys); + status = request_threaded_irq(keys->irq, + dm355evm_keys_hardirq, dm355evm_keys_irq, + IRQF_TRIGGER_FALLING, + dev_name(&pdev->dev), keys); if (status < 0) goto fail1; -- cgit v0.10.2 From 72398e4b1a4cf55d3698a4f265b638093a470b04 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 7 Jul 2009 22:04:55 -0700 Subject: Input: use resource_size when allocating resources Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // Signed-off-by: Julia Lawall Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 2adf9cb..d01da9b 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -116,7 +116,7 @@ static int __devinit cobalt_buttons_probe(struct platform_device *pdev) } bdev->poll_dev = poll_dev; - bdev->reg = ioremap(res->start, res->end - res->start + 1); + bdev->reg = ioremap(res->start, resource_size(res)); dev_set_drvdata(&pdev->dev, bdev); error = input_register_polled_device(poll_dev); diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c index 41fda8c..a6fb7a3 100644 --- a/drivers/input/serio/at32psif.c +++ b/drivers/input/serio/at32psif.c @@ -231,7 +231,7 @@ static int __init psif_probe(struct platform_device *pdev) goto out_free_io; } - psif->regs = ioremap(regs->start, regs->end - regs->start + 1); + psif->regs = ioremap(regs->start, resource_size(regs)); if (!psif->regs) { ret = -ENOMEM; dev_dbg(&pdev->dev, "could not map I/O memory\n"); diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 055969e..9c7fce4 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -204,14 +204,14 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev) goto err_free_dev; } - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), "atmel tsadcc regs")) { dev_err(&pdev->dev, "resources is unavailable.\n"); err = -EBUSY; goto err_free_dev; } - tsc_base = ioremap(res->start, res->end - res->start + 1); + tsc_base = ioremap(res->start, resource_size(res)); if (!tsc_base) { dev_err(&pdev->dev, "failed to map registers.\n"); err = -ENOMEM; @@ -286,7 +286,7 @@ err_free_irq: err_unmap_regs: iounmap(tsc_base); err_release_mem: - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); err_free_dev: input_free_device(ts_dev->input); err_free_mem: @@ -305,7 +305,7 @@ static int __devexit atmel_tsadcc_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iounmap(tsc_base); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); clk_disable(ts_dev->clk); clk_put(ts_dev->clk); diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 6071f58..b3e782f 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -241,13 +241,13 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) goto fail1; } - if (!request_mem_region(res->start, res->end - res->start + 1, + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { err = -EBUSY; goto fail1; } - w90p910_ts->ts_reg = ioremap(res->start, res->end - res->start + 1); + w90p910_ts->ts_reg = ioremap(res->start, resource_size(res)); if (!w90p910_ts->ts_reg) { err = -ENOMEM; goto fail2; @@ -296,7 +296,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) fail4: free_irq(w90p910_ts->irq_num, w90p910_ts); fail3: iounmap(w90p910_ts->ts_reg); -fail2: release_mem_region(res->start, res->end - res->start + 1); +fail2: release_mem_region(res->start, resource_size(res)); fail1: input_free_device(input_dev); kfree(w90p910_ts); return err; @@ -312,7 +312,7 @@ static int __devexit w90x900ts_remove(struct platform_device *pdev) iounmap(w90p910_ts->ts_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); + release_mem_region(res->start, resource_size(res)); input_unregister_device(w90p910_ts->input); kfree(w90p910_ts); -- cgit v0.10.2 From f7370699fbbb18f97442d6f47cc2d478a911ad6f Mon Sep 17 00:00:00 2001 From: Jim Persson Date: Tue, 7 Jul 2009 22:07:59 -0700 Subject: Input: usbtouchscreen - support for JASTEC/DigiTech DTR-02U USB touch controllers Add support for the JASTEC/DigiTech DTR-02U USB touch screen controllers. Signed-off-by: Jim Persson Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 72e2712..a66e50a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -406,6 +406,7 @@ config TOUCHSCREEN_USB_COMPOSITE - IRTOUCHSYSTEMS/UNITOP - IdealTEK URTC1000 - GoTop Super_Q2/GogoPen/PenPower tablets + - JASTEC USB Touch Controller/DigiTech DTR-02U Have a look at for a usage description and the required user-space stuff. @@ -468,6 +469,11 @@ config TOUCHSCREEN_USB_GOTOP bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_JASTEC + default y + bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index fb7cb9b..c07be07 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -13,6 +13,7 @@ * - IdealTEK URTC1000 * - General Touch * - GoTop Super_Q2/GogoPen/PenPower tablets + * - JASTEC USB touch controller/DigiTech DTR-02U * * Copyright (C) 2004-2007 by Daniel Ritz * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -118,6 +119,7 @@ enum { DEVTYPE_IDEALTEK, DEVTYPE_GENERAL_TOUCH, DEVTYPE_GOTOP, + DEVTYPE_JASTEC, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -191,6 +193,10 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC}, +#endif + {} }; @@ -559,6 +565,21 @@ static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt) dev->x = ((pkt[1] & 0x38) << 4) | pkt[2]; dev->y = ((pkt[1] & 0x07) << 7) | pkt[3]; dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + +/***************************************************************************** + * JASTEC Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC +static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f); + dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f); + dev->touch = (pkt[0] & 0x40) >> 6; + return 1; } #endif @@ -702,6 +723,17 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = gotop_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + [DEVTYPE_JASTEC] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = jastec_read_data, + }, +#endif }; -- cgit v0.10.2 From f9c22736940cdc8f5e2db0109fc9493e0cbd895d Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Sun, 12 Jul 2009 20:51:25 -0700 Subject: Input: ucb1400_ts - fix a misleading function name The driver for UCB1400 touchscreen controllers contains a function named ucb1400_ts_pen_down(), but it returns 0 if the pen is down and 1 if it's up. This causes confusion, especially since it's used as a boolean truth value later in the code. This patch renames it. Signed-off-by: Hans J. Koch Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 6954f55..e854835 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -128,9 +128,10 @@ static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) return ucb1400_adc_read(ucb->ac97, 0, adcsync); } -static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97) +static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97) { unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR); + return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW); } @@ -209,7 +210,7 @@ static int ucb1400_ts_thread(void *_ucb) msleep(10); - if (ucb1400_ts_pen_down(ucb->ac97)) { + if (ucb1400_ts_pen_up(ucb->ac97)) { ucb1400_ts_irq_enable(ucb->ac97); /* -- cgit v0.10.2 From b7788c5ff9e7676dc98ca6dce437ae16b79c6726 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Sun, 12 Jul 2009 20:52:19 -0700 Subject: Input: w90p910_ts - use clk API Now that clk API is available on ARM we can use it in the driver. Signed-off-by: Wan ZongShun Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a66e50a..1c05b32 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -498,6 +498,7 @@ config TOUCHSCREEN_TSC2007 config TOUCHSCREEN_W90X900 tristate "W90P910 touchscreen driver" + depends on HAVE_CLK help Say Y here if you have a W90P910 based touchscreen. diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index b3e782f..dc4c9d6 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -47,8 +48,8 @@ enum ts_state { struct w90p910_ts { struct input_dev *input; struct timer_list timer; + struct clk *clk; int irq_num; - void __iomem *clocken; void __iomem *ts_reg; spinlock_t lock; enum ts_state state; @@ -166,8 +167,7 @@ static int w90p910_open(struct input_dev *dev) unsigned long val; /* enable the ADC clock */ - val = __raw_readl(w90p910_ts->clocken); - __raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken); + clk_enable(w90p910_ts->clk); __raw_writel(ADC_RST1, w90p910_ts->ts_reg); msleep(1); @@ -211,8 +211,7 @@ static void w90p910_close(struct input_dev *dev) del_timer_sync(&w90p910_ts->timer); /* stop the ADC clock */ - val = __raw_readl(w90p910_ts->clocken); - __raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken); + clk_disable(w90p910_ts->clk); } static int __devinit w90x900ts_probe(struct platform_device *pdev) @@ -253,14 +252,12 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) goto fail2; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - err = -ENXIO; + w90p910_ts->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(w90p910_ts->clk)) { + err = PTR_ERR(w90p910_ts->clk); goto fail3; } - w90p910_ts->clocken = (void __iomem *)res->start; - input_dev->name = "W90P910 TouchScreen"; input_dev->phys = "w90p910ts/event0"; input_dev->id.bustype = BUS_HOST; @@ -283,18 +280,19 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt, IRQF_DISABLED, "w90p910ts", w90p910_ts)) { err = -EBUSY; - goto fail3; + goto fail4; } err = input_register_device(w90p910_ts->input); if (err) - goto fail4; + goto fail5; platform_set_drvdata(pdev, w90p910_ts); return 0; -fail4: free_irq(w90p910_ts->irq_num, w90p910_ts); +fail5: free_irq(w90p910_ts->irq_num, w90p910_ts); +fail4: clk_put(w90p910_ts->clk); fail3: iounmap(w90p910_ts->ts_reg); fail2: release_mem_region(res->start, resource_size(res)); fail1: input_free_device(input_dev); @@ -311,6 +309,8 @@ static int __devexit w90x900ts_remove(struct platform_device *pdev) del_timer_sync(&w90p910_ts->timer); iounmap(w90p910_ts->ts_reg); + clk_put(w90p910_ts->clk); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); -- cgit v0.10.2 From b833306febc7d9b805a89aff29f1e410a64981c4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 Jul 2009 22:26:37 -0700 Subject: Input: wm97xx - add Palm support to Mainstone accelerated touch This patch refactors the Mainstone accelerated touch code a little and adds support for interrupt driven touchscreen on Palm LifeDrive, TX and Tungsten T5. Signed-off-by: Marek Vasut Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1c05b32..07703bc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -366,11 +366,11 @@ config TOUCHSCREEN_WM97XX_ATMEL be called atmel-wm97xx. config TOUCHSCREEN_WM97XX_MAINSTONE - tristate "WM97xx Mainstone accelerated touch" + tristate "WM97xx Mainstone/Palm accelerated touch" depends on TOUCHSCREEN_WM97XX && ARCH_PXA help Say Y here for support for streaming mode with WM97xx touchscreens - on Mainstone systems. + on Mainstone, Palm Tungsten T5, TX and LifeDrive systems. If unsure, say N. diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 4cc047a..c797bc0 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -31,9 +31,11 @@ #include #include #include +#include + #include -#define VERSION "0.13" +#include struct continuous { u16 id; /* codec id */ @@ -62,6 +64,7 @@ static const struct continuous cinfo[] = { /* continuous speed index */ static int sp_idx; static u16 last, tries; +static int irq; /* * Pen sampling frequency (Hz) in continuous mode. @@ -171,7 +174,7 @@ up: static int wm97xx_acc_startup(struct wm97xx *wm) { - int idx = 0; + int idx = 0, ret = 0; /* check we have a codec */ if (wm->ac97 == NULL) @@ -191,18 +194,37 @@ static int wm97xx_acc_startup(struct wm97xx *wm) "mainstone accelerated touchscreen driver, %d samples/sec\n", cinfo[sp_idx].speed); + /* IRQ driven touchscreen is used on Palm hardware */ + if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) { + pen_int = 1; + irq = 27; + } else if (machine_is_mainstone() && pen_int) + irq = 4; + + if (irq) { + ret = gpio_request(irq, "Touchscreen IRQ"); + if (ret) + goto out; + + ret = gpio_direction_input(irq); + if (ret) { + gpio_free(irq); + goto out; + } + + wm->pen_irq = gpio_to_irq(irq); + set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH); + } else /* pen irq not supported */ + pen_int = 0; + /* codec specific irq config */ if (pen_int) { switch (wm->id) { case WM9705_ID2: - wm->pen_irq = IRQ_GPIO(4); - set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH); break; case WM9712_ID2: case WM9713_ID2: - /* enable pen down interrupt */ /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */ - wm->pen_irq = MAINSTONE_AC97_IRQ; wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, WM97XX_GPIO_POL_HIGH, WM97XX_GPIO_STICKY, @@ -220,23 +242,17 @@ static int wm97xx_acc_startup(struct wm97xx *wm) } } - return 0; +out: + return ret; } static void wm97xx_acc_shutdown(struct wm97xx *wm) { /* codec specific deconfig */ if (pen_int) { - switch (wm->id & 0xffff) { - case WM9705_ID2: - wm->pen_irq = 0; - break; - case WM9712_ID2: - case WM9713_ID2: - /* disable interrupt */ - wm->pen_irq = 0; - break; - } + if (irq) + gpio_free(irq); + wm->pen_irq = 0; } } -- cgit v0.10.2 From 99fde513f57db2c8e1b202ade4be7d47033ff09b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 Jul 2009 22:28:50 -0700 Subject: Input: wm97xx - add possibility to control the GPIO_STATUS shift This patch allows tweaking the behaviour of GPIO_STATUS register shift quirk that's in wm97xx-core. The problem with GPIO_STATUS register being shifted by one doesn't appear on all hardware it seems and causes problems with accelerated touchscreen drivers on Palm hardware. Therefore an accelerated touchscreen driver can select if the shift is/isn't happening on the hardware. Signed-off-by: Marek Vasut Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index c797bc0..8fc3b08 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -198,6 +198,9 @@ static int wm97xx_acc_startup(struct wm97xx *wm) if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) { pen_int = 1; irq = 27; + /* There is some obscure mutant of WM9712 interbred with WM9713 + * used on Palm HW */ + wm->variant = WM97xx_WM1613; } else if (machine_is_mainstone() && pen_int) irq = 4; diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 2957d48..252eb11 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -204,7 +204,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, else reg &= ~gpio; - if (wm->id == WM9712_ID2) + if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613) wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1); else wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg); @@ -307,7 +307,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) WM97XX_GPIO_13); } - if (wm->id == WM9712_ID2) + if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613) wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status & ~WM97XX_GPIO_13) << 1); else @@ -582,6 +582,8 @@ static int wm97xx_probe(struct device *dev) wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2); + wm->variant = WM97xx_GENERIC; + dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff); switch (wm->id & 0xff) { diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 6f69968..0c98781 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -16,6 +16,12 @@ #include /* + * WM97xx variants + */ +#define WM97xx_GENERIC 0x0000 +#define WM97xx_WM1613 0x1613 + +/* * WM97xx AC97 Touchscreen registers */ #define AC97_WM97XX_DIGITISER1 0x76 @@ -283,6 +289,7 @@ struct wm97xx { unsigned pen_is_down:1; /* Pen is down */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned pen_probably_down:1; /* used in polling mode */ + u16 variant; /* WM97xx chip variant */ u16 suspend_mode; /* PRP in suspend mode */ }; -- cgit v0.10.2 From 24d01c0681bfbc10a99304c48a89ad213d2d7a4b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 21 Jul 2009 01:12:12 -0700 Subject: Input: sh_keysc - allow modifying keymap from userspace Adjust the driver so EVIOCGKEYCODE/EVIOCSKEYCODE work. Acked-by: Magnus Damm Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index cea70e6..0714bf2 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -128,7 +128,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) struct resource *res; struct input_dev *input; char clk_name[8]; - int i, k; + int i; int irq, error; if (!pdev->dev.platform_data) { @@ -195,17 +195,19 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) input->id.product = 0x0001; input->id.version = 0x0100; + input->keycode = pdata->keycodes; + input->keycodesize = sizeof(pdata->keycodes[0]); + input->keycodemax = ARRAY_SIZE(pdata->keycodes); + error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto err4; } - for (i = 0; i < SH_KEYSC_MAXKEYS; i++) { - k = pdata->keycodes[i]; - if (k) - input_set_capability(input, EV_KEY, k); - } + for (i = 0; i < SH_KEYSC_MAXKEYS; i++) + __set_bit(pdata->keycodes[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); error = input_register_device(input); if (error) { @@ -221,7 +223,9 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS); device_init_wakeup(&pdev->dev, 1); + return 0; + err5: free_irq(irq, pdev); err4: @@ -252,6 +256,7 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); kfree(priv); + return 0; } @@ -267,11 +272,12 @@ static int sh_keysc_suspend(struct device *dev) if (device_may_wakeup(dev)) { value |= 0x80; enable_irq_wake(irq); - } - else + } else { value &= ~0x80; + } iowrite16(value, priv->iomem_base + KYCR1_OFFS); + return 0; } -- cgit v0.10.2 From 52ec7752b457311f10f5a8d16faa8ac2e684eb65 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 22 Jul 2009 21:51:40 -0700 Subject: Input: pxa27x_keypad - remove extra clk_disable clk_disable() in remove method is not needed since we already have clk_disable in pxa27x_keypad_close(). Also make sure the driver uses resource_size() and helpers from include/input/matrix_keypad.h Tested-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h index d5a48a9..63e8965 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h @@ -2,6 +2,7 @@ #define __ASM_ARCH_PXA27x_KEYPAD_H #include +#include #define MAX_MATRIX_KEY_ROWS (8) #define MAX_MATRIX_KEY_COLS (8) @@ -51,8 +52,6 @@ struct pxa27x_keypad_platform_data { unsigned int debounce_interval; }; -#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) - extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 0d2fc64..0943238 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -107,7 +108,7 @@ struct pxa27x_keypad { int irq; /* matrix key code map */ - unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; + unsigned short matrix_keycodes[MAX_MATRIX_KEY_NUM]; /* state row bits of each column scan */ uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS]; @@ -124,21 +125,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) { struct pxa27x_keypad_platform_data *pdata = keypad->pdata; struct input_dev *input_dev = keypad->input_dev; - unsigned int *key; int i; - key = &pdata->matrix_key_map[0]; - for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { - int row = ((*key) >> 28) & 0xf; - int col = ((*key) >> 24) & 0xf; - int code = (*key) & 0xffffff; + for (i = 0; i < pdata->matrix_key_map_size; i++) { + unsigned int key = pdata->matrix_key_map[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); keypad->matrix_keycodes[(row << 3) + col] = code; - set_bit(code, input_dev->keybit); + __set_bit(code, input_dev->keybit); } + __clear_bit(KEY_RESERVED, input_dev->keybit); for (i = 0; i < pdata->direct_key_num; i++) - set_bit(pdata->direct_key_map[i], input_dev->keybit); + __set_bit(pdata->direct_key_map[i], input_dev->keybit); keypad->rotary_up_key[0] = pdata->rotary0_up_key; keypad->rotary_up_key[1] = pdata->rotary1_up_key; @@ -149,18 +150,18 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) if (pdata->enable_rotary0) { if (pdata->rotary0_up_key && pdata->rotary0_down_key) { - set_bit(pdata->rotary0_up_key, input_dev->keybit); - set_bit(pdata->rotary0_down_key, input_dev->keybit); + __set_bit(pdata->rotary0_up_key, input_dev->keybit); + __set_bit(pdata->rotary0_down_key, input_dev->keybit); } else - set_bit(pdata->rotary0_rel_code, input_dev->relbit); + __set_bit(pdata->rotary0_rel_code, input_dev->relbit); } if (pdata->enable_rotary1) { if (pdata->rotary1_up_key && pdata->rotary1_down_key) { - set_bit(pdata->rotary1_up_key, input_dev->keybit); - set_bit(pdata->rotary1_down_key, input_dev->keybit); + __set_bit(pdata->rotary1_up_key, input_dev->keybit); + __set_bit(pdata->rotary1_down_key, input_dev->keybit); } else - set_bit(pdata->rotary1_rel_code, input_dev->relbit); + __set_bit(pdata->rotary1_rel_code, input_dev->relbit); } } @@ -425,8 +426,6 @@ static int pxa27x_keypad_resume(struct platform_device *pdev) #define pxa27x_keypad_resume NULL #endif -#define res_size(res) ((res)->end - (res)->start + 1) - static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) { struct pxa27x_keypad *keypad; @@ -461,14 +460,14 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free; } - res = request_mem_region(res->start, res_size(res), pdev->name); + res = request_mem_region(res->start, resource_size(res), pdev->name); if (res == NULL) { dev_err(&pdev->dev, "failed to request I/O memory\n"); error = -EBUSY; goto failed_free; } - keypad->mmio_base = ioremap(res->start, res_size(res)); + keypad->mmio_base = ioremap(res->start, resource_size(res)); if (keypad->mmio_base == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); error = -ENXIO; @@ -540,7 +539,7 @@ failed_put_clk: failed_free_io: iounmap(keypad->mmio_base); failed_free_mem: - release_mem_region(res->start, res_size(res)); + release_mem_region(res->start, resource_size(res)); failed_free: kfree(keypad); return error; @@ -552,8 +551,6 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev) struct resource *res; free_irq(keypad->irq, pdev); - - clk_disable(keypad->clk); clk_put(keypad->clk); input_unregister_device(keypad->input_dev); @@ -562,7 +559,7 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev) iounmap(keypad->mmio_base); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res_size(res)); + release_mem_region(res->start, resource_size(res)); platform_set_drvdata(pdev, NULL); kfree(keypad); -- cgit v0.10.2 From 4832958218f96f98009c5e01729fbe2b48c7124c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 22 Jul 2009 21:51:34 -0700 Subject: Input: add Blackfin rotary input driver This driver handles the Blackfin on-chip rotary peripheral. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h new file mode 100644 index 0000000..425ece6 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_rotary.h @@ -0,0 +1,39 @@ +/* + * board initialization should put one of these structures into platform_data + * and place the bfin-rotary onto platform_bus named "bfin-rotary". + */ + +#ifndef _BFIN_ROTARY_H +#define _BFIN_ROTARY_H + +/* mode bitmasks */ +#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ +#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ +#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ +#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ + +#define ROT_DEBE DEBE /* Debounce Enable */ + +#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ +#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ +#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ + +struct bfin_rotary_platform_data { + /* set rotary UP KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_up_key; + /* set rotary DOWN KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_down_key; + /* set rotary BUTTON KEY_### or BTN_### */ + unsigned int rotary_button_key; + /* set rotary Relative Axis REL_### in case you prefer + * bfin-rotary to send EV_REL otherwise set 0 + */ + unsigned int rotary_rel_code; + unsigned short debounce; /* 0..17 */ + unsigned short mode; +}; +#endif diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1acfa3a..cbe21bc 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -269,4 +269,14 @@ config INPUT_DM355EVM To compile this driver as a module, choose M here: the module will be called dm355evm_keys. + +config INPUT_BFIN_ROTARY + tristate "Blackfin Rotary support" + depends on BF54x || BF52x + help + Say Y here if you want to use the Blackfin Rotary. + + To compile this driver as a module, choose M here: the + module will be called bfin-rotary. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0d979fd..79c1e9a 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c new file mode 100644 index 0000000..690f3fa --- /dev/null +++ b/drivers/input/misc/bfin_rotary.c @@ -0,0 +1,283 @@ +/* + * Rotary counter driver for Analog Devices Blackfin Processors + * + * Copyright 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static const u16 per_cnt[] = { + P_CNT_CUD, + P_CNT_CDG, + P_CNT_CZM, + 0 +}; + +struct bfin_rot { + struct input_dev *input; + int irq; + unsigned int up_key; + unsigned int down_key; + unsigned int button_key; + unsigned int rel_code; + unsigned short cnt_config; + unsigned short cnt_imask; + unsigned short cnt_debounce; +}; + +static void report_key_event(struct input_dev *input, int keycode) +{ + /* simulate a press-n-release */ + input_report_key(input, keycode, 1); + input_sync(input); + input_report_key(input, keycode, 0); + input_sync(input); +} + +static void report_rotary_event(struct bfin_rot *rotary, int delta) +{ + struct input_dev *input = rotary->input; + + if (rotary->up_key) { + report_key_event(input, + delta > 0 ? rotary->up_key : rotary->down_key); + } else { + input_report_rel(input, rotary->rel_code, delta); + input_sync(input); + } +} + +static irqreturn_t bfin_rotary_isr(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct bfin_rot *rotary = platform_get_drvdata(pdev); + int delta; + + switch (bfin_read_CNT_STATUS()) { + + case ICII: + break; + + case UCII: + case DCII: + delta = bfin_read_CNT_COUNTER(); + if (delta) + report_rotary_event(rotary, delta); + break; + + case CZMII: + report_key_event(rotary->input, rotary->button_key); + break; + + default: + break; + } + + bfin_write_CNT_COMMAND(W1LCNT_ZERO); /* Clear COUNTER */ + bfin_write_CNT_STATUS(-1); /* Clear STATUS */ + + return IRQ_HANDLED; +} + +static int __devinit bfin_rotary_probe(struct platform_device *pdev) +{ + struct bfin_rotary_platform_data *pdata = pdev->dev.platform_data; + struct bfin_rot *rotary; + struct input_dev *input; + int error; + + /* Basic validation */ + if ((pdata->rotary_up_key && !pdata->rotary_down_key) || + (!pdata->rotary_up_key && pdata->rotary_down_key)) { + return -EINVAL; + } + + error = peripheral_request_list(per_cnt, dev_name(&pdev->dev)); + if (error) { + dev_err(&pdev->dev, "requesting peripherals failed\n"); + return error; + } + + rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL); + input = input_allocate_device(); + if (!rotary || !input) { + error = -ENOMEM; + goto out1; + } + + rotary->input = input; + + rotary->up_key = pdata->rotary_up_key; + rotary->down_key = pdata->rotary_down_key; + rotary->button_key = pdata->rotary_button_key; + rotary->rel_code = pdata->rotary_rel_code; + + error = rotary->irq = platform_get_irq(pdev, 0); + if (error < 0) + goto out1; + + input->name = pdev->name; + input->phys = "bfin-rotary/input0"; + input->dev.parent = &pdev->dev; + + input_set_drvdata(input, rotary); + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + if (rotary->up_key) { + __set_bit(EV_KEY, input->evbit); + __set_bit(rotary->up_key, input->keybit); + __set_bit(rotary->down_key, input->keybit); + } else { + __set_bit(EV_REL, input->evbit); + __set_bit(rotary->rel_code, input->relbit); + } + + if (rotary->button_key) { + __set_bit(EV_KEY, input->evbit); + __set_bit(rotary->button_key, input->keybit); + } + + error = request_irq(rotary->irq, bfin_rotary_isr, + 0, dev_name(&pdev->dev), pdev); + if (error) { + dev_err(&pdev->dev, + "unable to claim irq %d; error %d\n", + rotary->irq, error); + goto out1; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device (%d)\n", error); + goto out2; + } + + if (pdata->rotary_button_key) + bfin_write_CNT_IMASK(CZMIE); + + if (pdata->mode & ROT_DEBE) + bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE); + + if (pdata->mode) + bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | + (pdata->mode & ~CNTE)); + + bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE); + bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE); + + platform_set_drvdata(pdev, rotary); + device_init_wakeup(&pdev->dev, 1); + + return 0; + +out2: + free_irq(rotary->irq, pdev); +out1: + input_free_device(input); + kfree(rotary); + peripheral_free_list(per_cnt); + + return error; +} + +static int __devexit bfin_rotary_remove(struct platform_device *pdev) +{ + struct bfin_rot *rotary = platform_get_drvdata(pdev); + + bfin_write_CNT_CONFIG(0); + bfin_write_CNT_IMASK(0); + + free_irq(rotary->irq, pdev); + input_unregister_device(rotary->input); + peripheral_free_list(per_cnt); + + kfree(rotary); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int bfin_rotary_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bfin_rot *rotary = platform_get_drvdata(pdev); + + rotary->cnt_config = bfin_read_CNT_CONFIG(); + rotary->cnt_imask = bfin_read_CNT_IMASK(); + rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE(); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(rotary->irq); + + return 0; +} + +static int bfin_rotary_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bfin_rot *rotary = platform_get_drvdata(pdev); + + bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce); + bfin_write_CNT_IMASK(rotary->cnt_imask); + bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE); + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(rotary->irq); + + if (rotary->cnt_config & CNTE) + bfin_write_CNT_CONFIG(rotary->cnt_config); + + return 0; +} + +static struct dev_pm_ops bfin_rotary_pm_ops = { + .suspend = bfin_rotary_suspend, + .resume = bfin_rotary_resume, +}; +#endif + +static struct platform_driver bfin_rotary_device_driver = { + .probe = bfin_rotary_probe, + .remove = __devexit_p(bfin_rotary_remove), + .driver = { + .name = "bfin-rotary", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &bfin_rotary_pm_ops, +#endif + }, +}; + +static int __init bfin_rotary_init(void) +{ + return platform_driver_register(&bfin_rotary_device_driver); +} +module_init(bfin_rotary_init); + +static void __exit bfin_rotary_exit(void) +{ + platform_driver_unregister(&bfin_rotary_device_driver); +} +module_exit(bfin_rotary_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Rotary Counter driver for Blackfin Processors"); +MODULE_ALIAS("platform:bfin-rotary"); -- cgit v0.10.2 From 11a79260916b00bcfe1bcfbd7a994321ee25b880 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 23 Jul 2009 01:14:15 -0700 Subject: Input: bf54x-keys - convert printk() to dev_*() Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index d427f32..fe376a2 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -184,14 +184,13 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) int i, error; if (!pdata->rows || !pdata->cols || !pdata->keymap) { - printk(KERN_ERR DRV_NAME - ": No rows, cols or keymap from pdata\n"); + dev_err(&pdev->dev, "no rows, cols or keymap from pdata\n"); return -EINVAL; } if (!pdata->keymapsize || pdata->keymapsize > (pdata->rows * pdata->cols)) { - printk(KERN_ERR DRV_NAME ": Invalid keymapsize\n"); + dev_err(&pdev->dev, "invalid keymapsize\n"); return -EINVAL; } @@ -211,8 +210,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT || !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) { - printk(KERN_WARNING DRV_NAME - ": Invalid Debounce/Columndrive Time in platform data\n"); + dev_warn(&pdev->dev, + "invalid platform debounce/columndrive time\n"); bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */ } else { bfin_write_KPAD_MSEL( @@ -231,16 +230,14 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) if (peripheral_request_list((u16 *)&per_rows[MAX_RC - pdata->rows], DRV_NAME)) { - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); + dev_err(&pdev->dev, "requesting peripherals failed\n"); error = -EFAULT; goto out0; } if (peripheral_request_list((u16 *)&per_cols[MAX_RC - pdata->cols], DRV_NAME)) { - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); + dev_err(&pdev->dev, "requesting peripherals failed\n"); error = -EFAULT; goto out1; } @@ -254,9 +251,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, 0, DRV_NAME, pdev); if (error) { - printk(KERN_ERR DRV_NAME - ": unable to claim irq %d; error %d\n", - bf54x_kpad->irq, error); + dev_err(&pdev->dev, "unable to claim irq %d\n", + bf54x_kpad->irq); goto out2; } @@ -297,8 +293,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) error = input_register_device(input); if (error) { - printk(KERN_ERR DRV_NAME - ": Unable to register input device (%d)\n", error); + dev_err(&pdev->dev, "unable to register input device\n"); goto out4; } @@ -316,9 +311,6 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); - printk(KERN_ERR DRV_NAME - ": Blackfin BF54x Keypad registered IRQ %d\n", bf54x_kpad->irq); - return 0; out4: -- cgit v0.10.2 From 8150f32b90f630ad3e460f026ce338cb81685bc9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Jul 2009 22:11:32 -0700 Subject: Driver Core: Make PM operations a const pointer They are not supposed to be modified by drivers, so make them const. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 81cb01b..c4b3fce 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -925,7 +925,7 @@ static int platform_pm_restore_noirq(struct device *dev) #endif /* !CONFIG_HIBERNATION */ -static struct dev_pm_ops platform_dev_pm_ops = { +static const struct dev_pm_ops platform_dev_pm_ops = { .prepare = platform_pm_prepare, .complete = platform_pm_complete, .suspend = platform_pm_suspend, diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 58a3e57..1b1a786 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -157,8 +157,9 @@ void device_pm_move_last(struct device *dev) * @ops: PM operations to choose from. * @state: PM transition of the system being carried out. */ -static int pm_op(struct device *dev, struct dev_pm_ops *ops, - pm_message_t state) +static int pm_op(struct device *dev, + const struct dev_pm_ops *ops, + pm_message_t state) { int error = 0; @@ -220,7 +221,8 @@ static int pm_op(struct device *dev, struct dev_pm_ops *ops, * The operation is executed with interrupts disabled by the only remaining * functional CPU in the system. */ -static int pm_noirq_op(struct device *dev, struct dev_pm_ops *ops, +static int pm_noirq_op(struct device *dev, + const struct dev_pm_ops *ops, pm_message_t state) { int error = 0; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index d76c4c8..0c2ea44 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -575,7 +575,7 @@ static void pci_pm_complete(struct device *dev) static int pci_pm_suspend(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_SUSPEND); @@ -613,7 +613,7 @@ static int pci_pm_suspend(struct device *dev) static int pci_pm_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend_late(dev, PMSG_SUSPEND); @@ -672,7 +672,7 @@ static int pci_pm_resume_noirq(struct device *dev) static int pci_pm_resume(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; /* @@ -711,7 +711,7 @@ static int pci_pm_resume(struct device *dev) static int pci_pm_freeze(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_FREEZE); @@ -780,7 +780,7 @@ static int pci_pm_thaw_noirq(struct device *dev) static int pci_pm_thaw(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; if (pci_has_legacy_pm_support(pci_dev)) @@ -799,7 +799,7 @@ static int pci_pm_thaw(struct device *dev) static int pci_pm_poweroff(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_HIBERNATE); @@ -872,7 +872,7 @@ static int pci_pm_restore_noirq(struct device *dev) static int pci_pm_restore(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int error = 0; /* @@ -910,7 +910,7 @@ static int pci_pm_restore(struct device *dev) #endif /* !CONFIG_HIBERNATION */ -struct dev_pm_ops pci_dev_pm_ops = { +const struct dev_pm_ops pci_dev_pm_ops = { .prepare = pci_pm_prepare, .complete = pci_pm_complete, .suspend = pci_pm_suspend, diff --git a/include/linux/device.h b/include/linux/device.h index aebb810..a286429 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -62,7 +62,7 @@ struct bus_type { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct bus_type_private *p; }; @@ -132,7 +132,7 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct driver_private *p; }; @@ -200,7 +200,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; + struct class_private *p; }; @@ -291,7 +292,7 @@ struct device_type { char *(*nodename)(struct device *dev); void (*release)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; }; /* interface for exporting device attributes */ -- cgit v0.10.2 From ae78e0e0e49885bef3bffee2a56254db6abf562c Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 22 Jul 2009 23:02:54 -0700 Subject: Input: gpio_keys - swtich to dev_pm_ops Signed-off-by: Mike Rapoport Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index efed0c9..a88aff3 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -216,8 +216,9 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) #ifdef CONFIG_PM -static int gpio_keys_suspend(struct platform_device *pdev, pm_message_t state) +static int gpio_keys_suspend(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; int i; @@ -234,8 +235,9 @@ static int gpio_keys_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int gpio_keys_resume(struct platform_device *pdev) +static int gpio_keys_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; int i; @@ -251,19 +253,22 @@ static int gpio_keys_resume(struct platform_device *pdev) return 0; } -#else -#define gpio_keys_suspend NULL -#define gpio_keys_resume NULL + +static const struct dev_pm_ops gpio_keys_pm_ops = { + .suspend = gpio_keys_suspend, + .resume = gpio_keys_resume, +}; #endif static struct platform_driver gpio_keys_device_driver = { .probe = gpio_keys_probe, .remove = __devexit_p(gpio_keys_remove), - .suspend = gpio_keys_suspend, - .resume = gpio_keys_resume, .driver = { .name = "gpio-keys", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_keys_pm_ops, +#endif } }; -- cgit v0.10.2 From ebd7768daeb39b0691e25175e25b980f13e913e2 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 22 Jul 2009 21:51:32 -0700 Subject: Input: i8042 - switch to using dev_pm_ops Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 582245c..9f5c050 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -923,41 +923,27 @@ static void i8042_dritek_enable(void) #ifdef CONFIG_PM -static bool i8042_suspended; - /* - * Here we try to restore the original BIOS settings. We only want to - * do that once, when we really suspend, not when we taking memory - * snapshot for swsusp (in this case we'll perform required cleanup - * as part of shutdown process). + * Here we try to restore the original BIOS settings to avoid + * upsetting it. */ -static int i8042_suspend(struct platform_device *dev, pm_message_t state) +static int i8042_pm_reset(struct device *dev) { - if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) - i8042_controller_reset(); - - i8042_suspended = state.event == PM_EVENT_SUSPEND || - state.event == PM_EVENT_FREEZE; + i8042_controller_reset(); return 0; } - /* - * Here we try to reset everything back to a state in which suspended + * Here we try to reset everything back to a state we had + * before suspending. */ -static int i8042_resume(struct platform_device *dev) +static int i8042_pm_restore(struct device *dev) { int error; -/* - * Do not bother with restoring state if we haven't suspened yet - */ - if (!i8042_suspended) - return 0; - error = i8042_controller_check(); if (error) return error; @@ -1001,11 +987,18 @@ static int i8042_resume(struct platform_device *dev) if (i8042_ports[I8042_KBD_PORT_NO].serio) i8042_enable_kbd_port(); - i8042_suspended = false; i8042_interrupt(0, NULL); return 0; } + +static const struct dev_pm_ops i8042_pm_ops = { + .suspend = i8042_pm_reset, + .resume = i8042_pm_restore, + .poweroff = i8042_pm_reset, + .restore = i8042_pm_restore, +}; + #endif /* CONFIG_PM */ /* @@ -1251,14 +1244,13 @@ static struct platform_driver i8042_driver = { .driver = { .name = "i8042", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &i8042_pm_ops, +#endif }, .probe = i8042_probe, .remove = __devexit_p(i8042_remove), .shutdown = i8042_shutdown, -#ifdef CONFIG_PM - .suspend = i8042_suspend, - .resume = i8042_resume, -#endif }; static int __init i8042_init(void) -- cgit v0.10.2 From 633aae23ff31bef692a70772652e753a0ae59b81 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 22 Jul 2009 21:51:36 -0700 Subject: Input: serio - switch to using dev_pm_ops Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index d66f494..0236f0d 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -931,15 +931,11 @@ static int serio_uevent(struct device *dev, struct kobj_uevent_env *env) #endif /* CONFIG_HOTPLUG */ #ifdef CONFIG_PM -static int serio_suspend(struct device *dev, pm_message_t state) +static int serio_suspend(struct device *dev) { struct serio *serio = to_serio_port(dev); - if (!serio->suspended && state.event == PM_EVENT_SUSPEND) - serio_cleanup(serio); - - serio->suspended = state.event == PM_EVENT_SUSPEND || - state.event == PM_EVENT_FREEZE; + serio_cleanup(serio); return 0; } @@ -952,13 +948,17 @@ static int serio_resume(struct device *dev) * Driver reconnect can take a while, so better let kseriod * deal with it. */ - if (serio->suspended) { - serio->suspended = false; - serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT); - } + serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT); return 0; } + +static const struct dev_pm_ops serio_pm_ops = { + .suspend = serio_suspend, + .resume = serio_resume, + .poweroff = serio_suspend, + .restore = serio_resume, +}; #endif /* CONFIG_PM */ /* called from serio_driver->connect/disconnect methods under serio_mutex */ @@ -1015,8 +1015,7 @@ static struct bus_type serio_bus = { .remove = serio_driver_remove, .shutdown = serio_shutdown, #ifdef CONFIG_PM - .suspend = serio_suspend, - .resume = serio_resume, + .pm = &serio_pm_ops, #endif }; diff --git a/include/linux/serio.h b/include/linux/serio.h index 126d24c..a640bc2 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -31,8 +31,6 @@ struct serio { bool manual_bind; bool registered; /* port has been fully registered with driver core */ - bool suspended; /* port is suspended */ - struct serio_device_id id; -- cgit v0.10.2 From b0010911d52dc7836a78c9f5c3b32ce4ac05b3c3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Jul 2009 22:01:43 -0700 Subject: Input: pxa27x_keypad - switch to using dev_pm_ops Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 0943238..c987cc7 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -389,8 +389,9 @@ static void pxa27x_keypad_close(struct input_dev *dev) } #ifdef CONFIG_PM -static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t state) +static int pxa27x_keypad_suspend(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); clk_disable(keypad->clk); @@ -401,8 +402,9 @@ static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t stat return 0; } -static int pxa27x_keypad_resume(struct platform_device *pdev) +static int pxa27x_keypad_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); struct input_dev *input_dev = keypad->input_dev; @@ -421,9 +423,11 @@ static int pxa27x_keypad_resume(struct platform_device *pdev) return 0; } -#else -#define pxa27x_keypad_suspend NULL -#define pxa27x_keypad_resume NULL + +static const struct dev_pm_ops pxa27x_keypad_pm_ops = { + .suspend = pxa27x_keypad_suspend, + .resume = pxa27x_keypad_resume, +}; #endif static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) @@ -572,11 +576,12 @@ MODULE_ALIAS("platform:pxa27x-keypad"); static struct platform_driver pxa27x_keypad_driver = { .probe = pxa27x_keypad_probe, .remove = __devexit_p(pxa27x_keypad_remove), - .suspend = pxa27x_keypad_suspend, - .resume = pxa27x_keypad_resume, .driver = { .name = "pxa27x-keypad", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &pxa27x_keypad_pm_ops, +#endif }, }; -- cgit v0.10.2 From 75fba3b05d6ed82b975c1f8df8f8e08d5d81dee5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Fri, 24 Jul 2009 22:01:39 -0700 Subject: Input: tsc2007 - remove HR timer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since it's not allowed to do synchronous I2C in the HR timer callback context we have to switch to using the global workqueue. The work is scheduled every 1ms when polling rather than 5 us. Signed-off-by: Richard Röjfors Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 880f58c..b512697 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -21,15 +21,13 @@ */ #include -#include #include #include #include #include #include -#define TS_POLL_DELAY (10 * 1000) /* ns delay before the first sample */ -#define TS_POLL_PERIOD (5 * 1000) /* ns delay between samples */ +#define TS_POLL_PERIOD msecs_to_jiffies(1) /* ms delay between samples */ #define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) @@ -70,13 +68,11 @@ struct ts_event { struct tsc2007 { struct input_dev *input; char phys[32]; - struct hrtimer timer; + struct delayed_work work; struct ts_event tc; struct i2c_client *client; - spinlock_t lock; - u16 model; u16 x_plate_ohms; @@ -142,8 +138,7 @@ static void tsc2007_send_event(void *tsc) if (rt > MAX_12BIT) { dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, TS_POLL_PERIOD); return; } @@ -153,7 +148,7 @@ static void tsc2007_send_event(void *tsc) * in some cases may not even settle at the expected value. * * The only safe way to check for the pen up condition is in the - * timer by reading the pen signal state (it's a GPIO _and_ IRQ). + * work function by reading the pen signal state (it's a GPIO and IRQ). */ if (rt) { struct input_dev *input = ts->input; @@ -175,8 +170,7 @@ static void tsc2007_send_event(void *tsc) x, y, rt); } - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, TS_POLL_PERIOD); } static int tsc2007_read_values(struct tsc2007 *tsc) @@ -197,13 +191,10 @@ static int tsc2007_read_values(struct tsc2007 *tsc) return 0; } -static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) +static void tsc2007_work(struct work_struct *work) { - struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); - unsigned long flags; - - spin_lock_irqsave(&ts->lock, flags); - + struct tsc2007 *ts = + container_of(to_delayed_work(work), struct tsc2007, work); if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -222,30 +213,20 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) tsc2007_read_values(ts); tsc2007_send_event(ts); } - - spin_unlock_irqrestore(&ts->lock, flags); - - return HRTIMER_NORESTART; } static irqreturn_t tsc2007_irq(int irq, void *handle) { struct tsc2007 *ts = handle; - unsigned long flags; - - spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { disable_irq_nosync(ts->irq); - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), - HRTIMER_MODE_REL); + schedule_delayed_work(&ts->work, 0); } if (ts->clear_penirq) ts->clear_penirq(); - spin_unlock_irqrestore(&ts->lock, flags); - return IRQ_HANDLED; } @@ -278,11 +259,6 @@ static int tsc2007_probe(struct i2c_client *client, ts->input = input_dev; - hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - ts->timer.function = tsc2007_timer; - - spin_lock_init(&ts->lock); - ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->get_pendown_state = pdata->get_pendown_state; @@ -308,6 +284,8 @@ static int tsc2007_probe(struct i2c_client *client, ts->irq = client->irq; + INIT_DELAYED_WORK(&ts->work, tsc2007_work); + err = request_irq(ts->irq, tsc2007_irq, 0, client->dev.driver->name, ts); if (err < 0) { @@ -325,7 +303,6 @@ static int tsc2007_probe(struct i2c_client *client, err_free_irq: free_irq(ts->irq, ts); - hrtimer_cancel(&ts->timer); err_free_mem: input_free_device(input_dev); kfree(ts); @@ -337,11 +314,12 @@ static int tsc2007_remove(struct i2c_client *client) struct tsc2007 *ts = i2c_get_clientdata(client); struct tsc2007_platform_data *pdata; + cancel_delayed_work_sync(&ts->work); + pdata = client->dev.platform_data; pdata->exit_platform_hw(); free_irq(ts->irq, ts); - hrtimer_cancel(&ts->timer); input_unregister_device(ts->input); kfree(ts); -- cgit v0.10.2 From 141586bc57f6083f36c18d86e1cfa5916a1e7c05 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Jul 2009 23:14:16 -0700 Subject: Input: tsc2007 - properly shut off interrupts/delayed work MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Properly shut off interrupts/delayed work by free-ing IRQ first and then ensuring that enable/disable is balanced. Also add __devinit/__devexit markings, restore poll delay/period scheduling logic, make sure we call exit_platform_hw() method when probe fails. Tested-by: Richard Röjfors Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index b512697..75fbd75 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -27,7 +27,8 @@ #include #include -#define TS_POLL_PERIOD msecs_to_jiffies(1) /* ms delay between samples */ +#define TS_POLL_DELAY 1 /* ms delay between samples */ +#define TS_POLL_PERIOD 1 /* ms delay between samples */ #define TSC2007_MEASURE_TEMP0 (0x0 << 4) #define TSC2007_MEASURE_AUX (0x2 << 4) @@ -76,7 +77,7 @@ struct tsc2007 { u16 model; u16 x_plate_ohms; - unsigned pendown; + bool pendown; int irq; int (*get_pendown_state)(void); @@ -131,18 +132,18 @@ static void tsc2007_send_event(void *tsc) } else rt = 0; - /* Sample found inconsistent by debouncing or pressure is beyond + /* + * Sample found inconsistent by debouncing or pressure is beyond * the maximum. Don't report it to user space, repeat at least * once more the measurement */ if (rt > MAX_12BIT) { dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - - schedule_delayed_work(&ts->work, TS_POLL_PERIOD); return; } - /* NOTE: We can't rely on the pressure to determine the pen down + /* + * NOTE: We can't rely on the pressure to determine the pen down * state, even this controller has a pressure sensor. The pressure * value can fluctuate for quite a while after lifting the pen and * in some cases may not even settle at the expected value. @@ -157,7 +158,7 @@ static void tsc2007_send_event(void *tsc) dev_dbg(&ts->client->dev, "DOWN\n"); input_report_key(input, BTN_TOUCH, 1); - ts->pendown = 1; + ts->pendown = true; } input_report_abs(input, ABS_X, x); @@ -169,8 +170,6 @@ static void tsc2007_send_event(void *tsc) dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n", x, y, rt); } - - schedule_delayed_work(&ts->work, TS_POLL_PERIOD); } static int tsc2007_read_values(struct tsc2007 *tsc) @@ -195,6 +194,7 @@ static void tsc2007_work(struct work_struct *work) { struct tsc2007 *ts = container_of(to_delayed_work(work), struct tsc2007, work); + if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -204,7 +204,7 @@ static void tsc2007_work(struct work_struct *work) input_report_abs(input, ABS_PRESSURE, 0); input_sync(input); - ts->pendown = 0; + ts->pendown = false; enable_irq(ts->irq); } else { /* pen is still down, continue with the measurement */ @@ -212,6 +212,9 @@ static void tsc2007_work(struct work_struct *work) tsc2007_read_values(ts); tsc2007_send_event(ts); + + schedule_delayed_work(&ts->work, + msecs_to_jiffies(TS_POLL_PERIOD)); } } @@ -221,7 +224,8 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) if (likely(ts->get_pendown_state())) { disable_irq_nosync(ts->irq); - schedule_delayed_work(&ts->work, 0); + schedule_delayed_work(&ts->work, + msecs_to_jiffies(TS_POLL_DELAY)); } if (ts->clear_penirq) @@ -230,8 +234,21 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) return IRQ_HANDLED; } -static int tsc2007_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static void tsc2007_free_irq(struct tsc2007 *ts) +{ + free_irq(ts->irq, ts); + if (cancel_delayed_work_sync(&ts->work)) { + /* + * Work was pending, therefore we need to enable + * IRQ here to balance the disable_irq() done in the + * interrupt handler. + */ + enable_irq(ts->irq); + } +} + +static int __devinit tsc2007_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct tsc2007 *ts; struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data; @@ -255,17 +272,15 @@ static int tsc2007_probe(struct i2c_client *client, } ts->client = client; - i2c_set_clientdata(client, ts); - + ts->irq = client->irq; ts->input = input_dev; + INIT_DELAYED_WORK(&ts->work, tsc2007_work); ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; - pdata->init_platform_hw(); - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); @@ -280,11 +295,7 @@ static int tsc2007_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); - tsc2007_read_values(ts); - - ts->irq = client->irq; - - INIT_DELAYED_WORK(&ts->work, tsc2007_work); + pdata->init_platform_hw(); err = request_irq(ts->irq, tsc2007_irq, 0, client->dev.driver->name, ts); @@ -297,29 +308,30 @@ static int tsc2007_probe(struct i2c_client *client, if (err) goto err_free_irq; - dev_info(&client->dev, "registered with irq (%d)\n", ts->irq); + i2c_set_clientdata(client, ts); + + tsc2007_read_values(ts); return 0; err_free_irq: - free_irq(ts->irq, ts); + tsc2007_free_irq(ts); + pdata->exit_platform_hw(); err_free_mem: input_free_device(input_dev); kfree(ts); return err; } -static int tsc2007_remove(struct i2c_client *client) +static int __devexit tsc2007_remove(struct i2c_client *client) { struct tsc2007 *ts = i2c_get_clientdata(client); - struct tsc2007_platform_data *pdata; + struct tsc2007_platform_data *pdata = client->dev.platform_data; - cancel_delayed_work_sync(&ts->work); + tsc2007_free_irq(ts); - pdata = client->dev.platform_data; pdata->exit_platform_hw(); - free_irq(ts->irq, ts); input_unregister_device(ts->input); kfree(ts); @@ -340,7 +352,7 @@ static struct i2c_driver tsc2007_driver = { }, .id_table = tsc2007_idtable, .probe = tsc2007_probe, - .remove = tsc2007_remove, + .remove = __devexit_p(tsc2007_remove), }; static int __init tsc2007_init(void) -- cgit v0.10.2 From cad065fd1e95003444e8528f801f52164cb78561 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Fri, 24 Jul 2009 23:14:17 -0700 Subject: Input: tsc2007 - make init/exit platform hw callbacks optional MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make init_platform_hw and exit_platform_hw callbacks optional since they are not needed on all platforms. Signed-off-by: Richard Röjfors Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 75fbd75..8105bf6 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -295,7 +295,8 @@ static int __devinit tsc2007_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); - pdata->init_platform_hw(); + if (pdata->init_platform_hw) + pdata->init_platform_hw(); err = request_irq(ts->irq, tsc2007_irq, 0, client->dev.driver->name, ts); @@ -316,7 +317,8 @@ static int __devinit tsc2007_probe(struct i2c_client *client, err_free_irq: tsc2007_free_irq(ts); - pdata->exit_platform_hw(); + if (pdata->exit_platform_hw) + pdata->exit_platform_hw(); err_free_mem: input_free_device(input_dev); kfree(ts); @@ -330,7 +332,8 @@ static int __devexit tsc2007_remove(struct i2c_client *client) tsc2007_free_irq(ts); - pdata->exit_platform_hw(); + if (pdata->exit_platform_hw) + pdata->exit_platform_hw(); input_unregister_device(ts->input); kfree(ts); -- cgit v0.10.2 From 703490ff7eaff03e412683da3d8367b5190a71ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Fri, 24 Jul 2009 23:14:17 -0700 Subject: Input: tsc2007 - do not read coordinates during probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't read coordinates during probe of the driver, just power down the controller and wait for interrupts. Signed-off-by: Richard Röjfors Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 8105bf6..f710af4 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -184,7 +184,7 @@ static int tsc2007_read_values(struct tsc2007 *tsc) tsc->tc.z1 = tsc2007_xfer(tsc, READ_Z1); tsc->tc.z2 = tsc2007_xfer(tsc, READ_Z2); - /* power down */ + /* Prepare for next touch reading - power down ADC, enable PENIRQ */ tsc2007_xfer(tsc, PWRDOWN); return 0; @@ -311,7 +311,8 @@ static int __devinit tsc2007_probe(struct i2c_client *client, i2c_set_clientdata(client, ts); - tsc2007_read_values(ts); + /* Prepare for touch readings - power down ADC and enable PENIRQ */ + tsc2007_xfer(ts, PWRDOWN); return 0; -- cgit v0.10.2 From 9e3b25837a20f4d48fef57b0cb8bf750a8cfa8e2 Mon Sep 17 00:00:00 2001 From: Florian Echtler Date: Mon, 27 Jul 2009 17:35:39 -0700 Subject: Input: usbtouchscreen - add support for e2i touchscreen controller This patch adds support for the e2i touchscreen controller used in the Mimo 740 (and probably in other e2i touchscreen products). Tested on Mimo 740. Signed-off-by: Florian Echtler Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 07703bc..87a1ae6 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -474,6 +474,11 @@ config TOUCHSCREEN_USB_JASTEC bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_E2I + default y + bool "e2i Touchscreen controller (e.g. from Mimo 740)" + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index c07be07..68ece58 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -120,6 +120,7 @@ enum { DEVTYPE_GENERAL_TOUCH, DEVTYPE_GOTOP, DEVTYPE_JASTEC, + DEVTYPE_E2I, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -197,11 +198,47 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I}, +#endif {} }; /***************************************************************************** + * e2i Part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I +static int e2i_init(struct usbtouch_usb *usbtouch) +{ + int ret; + + ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + 0x01, 0x02, 0x0000, 0x0081, + NULL, 0, USB_CTRL_SET_TIMEOUT); + + dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d", + __func__, ret); + return ret; +} + +static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int tmp = (pkt[0] << 8) | pkt[1]; + dev->x = (pkt[2] << 8) | pkt[3]; + dev->y = (pkt[4] << 8) | pkt[5]; + + tmp = tmp - 0xA000; + dev->touch = (tmp > 0); + dev->press = (tmp > 0 ? tmp : 0); + + return 1; +} +#endif + + +/***************************************************************************** * eGalax part */ @@ -734,6 +771,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = jastec_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + [DEVTYPE_E2I] = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 6, + .init = e2i_init, + .read_data = e2i_read_data, + }, +#endif }; -- cgit v0.10.2 From d570e9ef84e559b09e729f27f5381b6868f6cc5f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 4 Aug 2009 22:07:26 -0700 Subject: Input: tsc2007 - make get_pendown_state platform callback optional In cases when get_pendown_state callback is not available have the driver to fallback on pressure calculation to determine if the pen is up. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index f710af4..3714d19 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -70,7 +70,6 @@ struct tsc2007 { struct input_dev *input; char phys[32]; struct delayed_work work; - struct ts_event tc; struct i2c_client *client; @@ -106,51 +105,96 @@ static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) return val; } -static void tsc2007_send_event(void *tsc) +static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) { - struct tsc2007 *ts = tsc; - u32 rt; - u16 x, y, z1, z2; + /* y- still on; turn on only y+ (and ADC) */ + tc->y = tsc2007_xfer(tsc, READ_Y); + + /* turn y- off, x+ on, then leave in lowpower */ + tc->x = tsc2007_xfer(tsc, READ_X); + + /* turn y+ off, x- on; we'll use formula #1 */ + tc->z1 = tsc2007_xfer(tsc, READ_Z1); + tc->z2 = tsc2007_xfer(tsc, READ_Z2); - x = ts->tc.x; - y = ts->tc.y; - z1 = ts->tc.z1; - z2 = ts->tc.z2; + /* Prepare for next touch reading - power down ADC, enable PENIRQ */ + tsc2007_xfer(tsc, PWRDOWN); +} + +static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) +{ + u32 rt = 0; /* range filtering */ - if (x == MAX_12BIT) - x = 0; + if (tc->x == MAX_12BIT) + tc->x = 0; - if (likely(x && z1)) { + if (likely(tc->x && tc->z1)) { /* compute touch pressure resistance using equation #1 */ - rt = z2; - rt -= z1; - rt *= x; - rt *= ts->x_plate_ohms; - rt /= z1; + rt = tc->z2 - tc->z1; + rt *= tc->x; + rt *= tsc->x_plate_ohms; + rt /= tc->z1; rt = (rt + 2047) >> 12; - } else - rt = 0; - - /* - * Sample found inconsistent by debouncing or pressure is beyond - * the maximum. Don't report it to user space, repeat at least - * once more the measurement - */ - if (rt > MAX_12BIT) { - dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - return; } + return rt; +} + +static void tsc2007_send_up_event(struct tsc2007 *tsc) +{ + struct input_dev *input = tsc->input; + + dev_dbg(&tsc->client->dev, "UP\n"); + + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); +} + +static void tsc2007_work(struct work_struct *work) +{ + struct tsc2007 *ts = + container_of(to_delayed_work(work), struct tsc2007, work); + struct ts_event tc; + u32 rt; + /* * NOTE: We can't rely on the pressure to determine the pen down - * state, even this controller has a pressure sensor. The pressure - * value can fluctuate for quite a while after lifting the pen and - * in some cases may not even settle at the expected value. + * state, even though this controller has a pressure sensor. + * The pressure value can fluctuate for quite a while after + * lifting the pen and in some cases may not even settle at the + * expected value. * * The only safe way to check for the pen up condition is in the - * work function by reading the pen signal state (it's a GPIO and IRQ). + * work function by reading the pen signal state (it's a GPIO + * and IRQ). Unfortunately such callback is not always available, + * in that case we have rely on the pressure anyway. */ + if (ts->get_pendown_state) { + if (unlikely(!ts->get_pendown_state())) { + tsc2007_send_up_event(ts); + ts->pendown = false; + goto out; + } + + dev_dbg(&ts->client->dev, "pen is still down\n"); + } + + tsc2007_read_values(ts, &tc); + + rt = tsc2007_calculate_pressure(ts, &tc); + if (rt > MAX_12BIT) { + /* + * Sample found inconsistent by debouncing or pressure is + * beyond the maximum. Don't report it to user space, + * repeat at least once more the measurement. + */ + dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); + goto out; + + } + if (rt) { struct input_dev *input = ts->input; @@ -161,68 +205,38 @@ static void tsc2007_send_event(void *tsc) ts->pendown = true; } - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_X, tc.x); + input_report_abs(input, ABS_Y, tc.y); input_report_abs(input, ABS_PRESSURE, rt); input_sync(input); dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n", - x, y, rt); - } -} - -static int tsc2007_read_values(struct tsc2007 *tsc) -{ - /* y- still on; turn on only y+ (and ADC) */ - tsc->tc.y = tsc2007_xfer(tsc, READ_Y); - - /* turn y- off, x+ on, then leave in lowpower */ - tsc->tc.x = tsc2007_xfer(tsc, READ_X); - - /* turn y+ off, x- on; we'll use formula #1 */ - tsc->tc.z1 = tsc2007_xfer(tsc, READ_Z1); - tsc->tc.z2 = tsc2007_xfer(tsc, READ_Z2); - - /* Prepare for next touch reading - power down ADC, enable PENIRQ */ - tsc2007_xfer(tsc, PWRDOWN); - - return 0; -} - -static void tsc2007_work(struct work_struct *work) -{ - struct tsc2007 *ts = - container_of(to_delayed_work(work), struct tsc2007, work); - - if (unlikely(!ts->get_pendown_state() && ts->pendown)) { - struct input_dev *input = ts->input; - - dev_dbg(&ts->client->dev, "UP\n"); - - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_sync(input); + tc.x, tc.y, rt); + } else if (!ts->get_pendown_state && ts->pendown) { + /* + * We don't have callback to check pendown state, so we + * have to assume that since pressure reported is 0 the + * pen was lifted up. + */ + tsc2007_send_up_event(ts); ts->pendown = false; - enable_irq(ts->irq); - } else { - /* pen is still down, continue with the measurement */ - dev_dbg(&ts->client->dev, "pen is still down\n"); - - tsc2007_read_values(ts); - tsc2007_send_event(ts); + } + out: + if (ts->pendown) schedule_delayed_work(&ts->work, msecs_to_jiffies(TS_POLL_PERIOD)); - } + else + enable_irq(ts->irq); } static irqreturn_t tsc2007_irq(int irq, void *handle) { struct tsc2007 *ts = handle; - if (likely(ts->get_pendown_state())) { + if (!ts->get_pendown_state || likely(ts->get_pendown_state())) { disable_irq_nosync(ts->irq); schedule_delayed_work(&ts->work, msecs_to_jiffies(TS_POLL_DELAY)); @@ -255,7 +269,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, struct input_dev *input_dev; int err; - if (!pdata || !pdata->get_pendown_state) { + if (!pdata) { dev_err(&client->dev, "platform data is required!\n"); return -EINVAL; } -- cgit v0.10.2 From cf5f439b48f82c230dcd81d0061e00664cbb6d39 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 4 Aug 2009 22:34:10 -0700 Subject: Input: tsc2007 - check if I2C communication works during probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check the result when sending the power down command to the controller. Signed-off-by: Richard Röjfors Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 3714d19..7ef0d14 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -319,15 +319,17 @@ static int __devinit tsc2007_probe(struct i2c_client *client, goto err_free_mem; } + /* Prepare for touch readings - power down ADC and enable PENIRQ */ + err = tsc2007_xfer(ts, PWRDOWN); + if (err < 0) + goto err_free_irq; + err = input_register_device(input_dev); if (err) goto err_free_irq; i2c_set_clientdata(client, ts); - /* Prepare for touch readings - power down ADC and enable PENIRQ */ - tsc2007_xfer(ts, PWRDOWN); - return 0; err_free_irq: -- cgit v0.10.2 From c46dd1eb9a4f1b8c1bb597a75199e3d34fb7b43b Mon Sep 17 00:00:00 2001 From: Paul Fox Date: Wed, 5 Aug 2009 00:30:31 -0700 Subject: Input: hgpk - forced recalibration for the OLPC touchpad The OLPC XO laptop incorporates a combination touchpad/tablet device which unfortunately requires frequent recalibration. The driver will force this automatically when various suspicious behaviors are observed, and the user can recalibrate manually (with a special keyboard sequence). There's currently no way, however, for an external program to cause recalibration. We can not use the reconnect capability which is already available in /sys because full reset of the touchpad takes 1.1 - 1.2 secons which is too long. This patch creates a new node in /sys which, when written with '1', will force a touchpad recalibration; no other writes (or reads) of this node are supported. Signed-off-by: Paul Fox Acked-by: Andres Salomon Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index a1ad2f1..f5aa035 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -369,12 +369,46 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL, hgpk_show_powered, hgpk_set_powered, 0); +static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse, + void *data, char *buf) +{ + return -EINVAL; +} + +static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + struct hgpk_data *priv = psmouse->private; + unsigned long value; + int err; + + err = strict_strtoul(buf, 10, &value); + if (err || value != 1) + return -EINVAL; + + /* + * We queue work instead of doing recalibration right here + * to avoid adding locking to to hgpk_force_recalibrate() + * since workqueue provides serialization. + */ + psmouse_queue_work(psmouse, &priv->recalib_wq, 0); + return count; +} + +__PSMOUSE_DEFINE_ATTR(recalibrate, S_IWUSR | S_IRUGO, NULL, + hgpk_trigger_recal_show, hgpk_trigger_recal, 0); + static void hgpk_disconnect(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); + + if (psmouse->model >= HGPK_MODEL_C) + device_remove_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_recalibrate.dattr); + psmouse_reset(psmouse); kfree(priv); } @@ -423,10 +457,25 @@ static int hgpk_register(struct psmouse *psmouse) err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); - if (err) - hgpk_err(psmouse, "Failed to create sysfs attribute\n"); + if (err) { + hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n"); + return err; + } - return err; + /* C-series touchpads added the recalibrate command */ + if (psmouse->model >= HGPK_MODEL_C) { + err = device_create_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_recalibrate.dattr); + if (err) { + hgpk_err(psmouse, + "Failed creating 'recalibrate' sysfs node\n"); + device_remove_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_powered.dattr); + return err; + } + } + + return 0; } int hgpk_init(struct psmouse *psmouse) -- cgit v0.10.2 From dd0d5443da02b091636e967407805f0b7712fd44 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 5 Aug 2009 00:30:26 -0700 Subject: Input: serio - don't use serio->write() directly We have a nice wrapper for that. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index 6f35670..f732893 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -280,28 +280,28 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) init_MUTEX_LOCKED(&kbd->sem); /* Get device info. MLC driver supplies devid/status/etc. */ - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_IDD); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_IDD); down(&kbd->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_RSC); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RSC); down(&kbd->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_RNM); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RNM); down(&kbd->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_EXD); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_EXD); down(&kbd->sem); up(&kbd->sem); @@ -350,10 +350,10 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) printk(KERN_INFO "input: %s, ID: %d\n", kbd->dev->name, did); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */ + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */ down(&kbd->sem); up(&kbd->sem); diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index 4730ef3..f9847e0 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -525,12 +525,12 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code, CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); if (leds_on != 0) { - lk->serio->write (lk->serio, LK_CMD_LED_ON); - lk->serio->write (lk->serio, leds_on); + serio_write (lk->serio, LK_CMD_LED_ON); + serio_write (lk->serio, leds_on); } if (leds_off != 0) { - lk->serio->write (lk->serio, LK_CMD_LED_OFF); - lk->serio->write (lk->serio, leds_off); + serio_write (lk->serio, LK_CMD_LED_OFF); + serio_write (lk->serio, leds_off); } return 0; @@ -539,20 +539,20 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code, case SND_CLICK: if (value == 0) { DBG ("%s: Deactivating key clicks\n", __func__); - lk->serio->write (lk->serio, LK_CMD_DISABLE_KEYCLICK); - lk->serio->write (lk->serio, LK_CMD_DISABLE_CTRCLICK); + serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK); + serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK); } else { DBG ("%s: Activating key clicks\n", __func__); - lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK); - lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume)); - lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK); - lk->serio->write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); + serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK); + serio_write (lk->serio, volume_to_hw (lk->keyclick_volume)); + serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK); + serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); } return 0; case SND_BELL: if (value != 0) - lk->serio->write (lk->serio, LK_CMD_SOUND_BELL); + serio_write (lk->serio, LK_CMD_SOUND_BELL); return 0; } @@ -579,10 +579,10 @@ lkkbd_reinit (struct work_struct *work) unsigned char leds_off = 0; /* Ask for ID */ - lk->serio->write (lk->serio, LK_CMD_REQUEST_ID); + serio_write (lk->serio, LK_CMD_REQUEST_ID); /* Reset parameters */ - lk->serio->write (lk->serio, LK_CMD_SET_DEFAULTS); + serio_write (lk->serio, LK_CMD_SET_DEFAULTS); /* Set LEDs */ CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK); @@ -590,12 +590,12 @@ lkkbd_reinit (struct work_struct *work) CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK); CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT); if (leds_on != 0) { - lk->serio->write (lk->serio, LK_CMD_LED_ON); - lk->serio->write (lk->serio, leds_on); + serio_write (lk->serio, LK_CMD_LED_ON); + serio_write (lk->serio, leds_on); } if (leds_off != 0) { - lk->serio->write (lk->serio, LK_CMD_LED_OFF); - lk->serio->write (lk->serio, leds_off); + serio_write (lk->serio, LK_CMD_LED_OFF); + serio_write (lk->serio, leds_off); } /* @@ -603,31 +603,31 @@ lkkbd_reinit (struct work_struct *work) * only work with a LK401 keyboard and grants access to * LAlt, RAlt, RCompose and RShift. */ - lk->serio->write (lk->serio, LK_CMD_ENABLE_LK401); + serio_write (lk->serio, LK_CMD_ENABLE_LK401); /* Set all keys to UPDOWN mode */ for (division = 1; division <= 14; division++) - lk->serio->write (lk->serio, LK_CMD_SET_MODE (LK_MODE_UPDOWN, + serio_write (lk->serio, LK_CMD_SET_MODE (LK_MODE_UPDOWN, division)); /* Enable bell and set volume */ - lk->serio->write (lk->serio, LK_CMD_ENABLE_BELL); - lk->serio->write (lk->serio, volume_to_hw (lk->bell_volume)); + serio_write (lk->serio, LK_CMD_ENABLE_BELL); + serio_write (lk->serio, volume_to_hw (lk->bell_volume)); /* Enable/disable keyclick (and possibly set volume) */ if (test_bit (SND_CLICK, lk->dev->snd)) { - lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK); - lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume)); - lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK); - lk->serio->write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); + serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK); + serio_write (lk->serio, volume_to_hw (lk->keyclick_volume)); + serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK); + serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume)); } else { - lk->serio->write (lk->serio, LK_CMD_DISABLE_KEYCLICK); - lk->serio->write (lk->serio, LK_CMD_DISABLE_CTRCLICK); + serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK); + serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK); } /* Sound the bell if needed */ if (test_bit (SND_BELL, lk->dev->snd)) - lk->serio->write (lk->serio, LK_CMD_SOUND_BELL); + serio_write (lk->serio, LK_CMD_SOUND_BELL); } /* @@ -684,8 +684,10 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv) input_dev->keycode = lk->keycode; input_dev->keycodesize = sizeof (lk_keycode_t); input_dev->keycodemax = LK_NUM_KEYCODES; + for (i = 0; i < LK_NUM_KEYCODES; i++) - set_bit (lk->keycode[i], input_dev->keybit); + __set_bit (lk->keycode[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); serio_set_drvdata (serio, lk); @@ -697,7 +699,7 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv) if (err) goto fail3; - lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET); + serio_write (lk->serio, LK_CMD_POWERCYCLE_RESET); return 0; diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c index 9fce6d1..e7aa935 100644 --- a/drivers/input/keyboard/sunkbd.c +++ b/drivers/input/keyboard/sunkbd.c @@ -150,8 +150,8 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c case EV_LED: - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED); - sunkbd->serio->write(sunkbd->serio, + serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); + serio_write(sunkbd->serio, (!!test_bit(LED_CAPSL, dev->led) << 3) | (!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_COMPOSE, dev->led) << 1) | !!test_bit(LED_NUML, dev->led)); return 0; @@ -161,11 +161,11 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c switch (code) { case SND_CLICK: - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value); + serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value); return 0; case SND_BELL: - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value); + serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value); return 0; } @@ -183,7 +183,7 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c static int sunkbd_initialize(struct sunkbd *sunkbd) { sunkbd->reset = -2; - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET); + serio_write(sunkbd->serio, SUNKBD_CMD_RESET); wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ); if (sunkbd->reset < 0) return -1; @@ -192,7 +192,7 @@ static int sunkbd_initialize(struct sunkbd *sunkbd) if (sunkbd->type == 4) { /* Type 4 keyboard */ sunkbd->layout = -2; - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_LAYOUT); + serio_write(sunkbd->serio, SUNKBD_CMD_LAYOUT); wait_event_interruptible_timeout(sunkbd->wait, sunkbd->layout >= 0, HZ/4); if (sunkbd->layout < 0) return -1; if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) sunkbd->type = 5; @@ -212,12 +212,14 @@ static void sunkbd_reinit(struct work_struct *work) wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED); - sunkbd->serio->write(sunkbd->serio, - (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | - (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); + serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); + serio_write(sunkbd->serio, + (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | + (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | + (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | + !!test_bit(LED_NUML, sunkbd->dev->led)); + serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); + serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); } static void sunkbd_enable(struct sunkbd *sunkbd, int enable) diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c index 3263ce0..cd12c2d 100644 --- a/drivers/input/mouse/hil_ptr.c +++ b/drivers/input/mouse/hil_ptr.c @@ -273,28 +273,28 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) init_MUTEX_LOCKED(&ptr->sem); /* Get device info. MLC driver supplies devid/status/etc. */ - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_IDD); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_IDD); down(&ptr->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_RSC); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RSC); down(&ptr->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_RNM); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_RNM); down(&ptr->sem); - serio->write(serio, 0); - serio->write(serio, 0); - serio->write(serio, HIL_PKT_CMD >> 8); - serio->write(serio, HIL_CMD_EXD); + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + serio_write(serio, HIL_CMD_EXD); down(&ptr->sem); up(&ptr->sem); diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index 404eedd..7011144 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -384,11 +384,11 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse) printk (KERN_NOTICE "%s on %s: Forceing standard packet format, " "incremental streaming mode and 72 samples/sec\n", mouse->name, mouse->phys); - mouse->serio->write (mouse->serio, 'S'); /* Standard format */ + serio_write (mouse->serio, 'S'); /* Standard format */ mdelay (50); - mouse->serio->write (mouse->serio, 'R'); /* Incremental */ + serio_write (mouse->serio, 'R'); /* Incremental */ mdelay (50); - mouse->serio->write (mouse->serio, 'L'); /* 72 samples/sec */ + serio_write (mouse->serio, 'L'); /* 72 samples/sec */ } static void @@ -532,7 +532,7 @@ vsxxxaa_connect (struct serio *serio, struct serio_driver *drv) * Request selftest. Standard packet format and differential * mode will be requested after the device ID'ed successfully. */ - serio->write (serio, 'T'); /* Test */ + serio_write (serio, 'T'); /* Test */ err = input_register_device (input_dev); if (err) diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index 4d3139e..b4d7f63 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -148,9 +148,10 @@ unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr) struct h3600_dev *ts = input_get_drvdata(dev); /* Must be in this order */ - ts->serio->write(ts->serio, 1); - ts->serio->write(ts->serio, pwr); - ts->serio->write(ts->serio, brightness); + serio_write(ts->serio, 1); + serio_write(ts->serio, pwr); + serio_write(ts->serio, brightness); + return 0; } @@ -262,7 +263,7 @@ static int h3600ts_event(struct input_dev *dev, unsigned int type, switch (type) { case EV_LED: { - // ts->serio->write(ts->serio, SOME_CMD); + // serio_write(ts->serio, SOME_CMD); return 0; } } -- cgit v0.10.2 From 67dbe83adca4415e210e436bf961e8a833030d1e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 7 Aug 2009 23:17:39 -0700 Subject: Input: wistron_btns - switch to using dev_pm_ops Also start using 'bool' where it makes sense. Tested-by: Giuseppe Mazzotta Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 26e17a9..bc3116b 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -243,9 +243,9 @@ enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH }; #define FE_UNTESTED 0x80 static struct key_entry *keymap; /* = NULL; Current key map */ -static int have_wifi; -static int have_bluetooth; -static int have_leds; +static bool have_wifi; +static bool have_bluetooth; +static int leds_present; /* bitmask of leds present */ static int __init dmi_matched(const struct dmi_system_id *dmi) { @@ -254,11 +254,11 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) keymap = dmi->driver_data; for (key = keymap; key->type != KE_END; key++) { if (key->type == KE_WIFI) - have_wifi = 1; + have_wifi = true; else if (key->type == KE_BLUETOOTH) - have_bluetooth = 1; + have_bluetooth = true; } - have_leds = key->code & (FE_MAIL_LED | FE_WIFI_LED); + leds_present = key->code & (FE_MAIL_LED | FE_WIFI_LED); return 1; } @@ -993,8 +993,8 @@ static int __init select_keymap(void) static struct input_polled_dev *wistron_idev; static unsigned long jiffies_last_press; -static int wifi_enabled; -static int bluetooth_enabled; +static bool wifi_enabled; +static bool bluetooth_enabled; static void report_key(struct input_dev *dev, unsigned int keycode) { @@ -1037,24 +1037,24 @@ static struct led_classdev wistron_wifi_led = { static void __devinit wistron_led_init(struct device *parent) { - if (have_leds & FE_WIFI_LED) { + if (leds_present & FE_WIFI_LED) { u16 wifi = bios_get_default_setting(WIFI); if (wifi & 1) { wistron_wifi_led.brightness = (wifi & 2) ? LED_FULL : LED_OFF; if (led_classdev_register(parent, &wistron_wifi_led)) - have_leds &= ~FE_WIFI_LED; + leds_present &= ~FE_WIFI_LED; else bios_set_state(WIFI, wistron_wifi_led.brightness); } else - have_leds &= ~FE_WIFI_LED; + leds_present &= ~FE_WIFI_LED; } - if (have_leds & FE_MAIL_LED) { + if (leds_present & FE_MAIL_LED) { /* bios_get_default_setting(MAIL) always retuns 0, so just turn the led off */ wistron_mail_led.brightness = LED_OFF; if (led_classdev_register(parent, &wistron_mail_led)) - have_leds &= ~FE_MAIL_LED; + leds_present &= ~FE_MAIL_LED; else bios_set_state(MAIL_LED, wistron_mail_led.brightness); } @@ -1062,28 +1062,28 @@ static void __devinit wistron_led_init(struct device *parent) static void __devexit wistron_led_remove(void) { - if (have_leds & FE_MAIL_LED) + if (leds_present & FE_MAIL_LED) led_classdev_unregister(&wistron_mail_led); - if (have_leds & FE_WIFI_LED) + if (leds_present & FE_WIFI_LED) led_classdev_unregister(&wistron_wifi_led); } static inline void wistron_led_suspend(void) { - if (have_leds & FE_MAIL_LED) + if (leds_present & FE_MAIL_LED) led_classdev_suspend(&wistron_mail_led); - if (have_leds & FE_WIFI_LED) + if (leds_present & FE_WIFI_LED) led_classdev_suspend(&wistron_wifi_led); } static inline void wistron_led_resume(void) { - if (have_leds & FE_MAIL_LED) + if (leds_present & FE_MAIL_LED) led_classdev_resume(&wistron_mail_led); - if (have_leds & FE_WIFI_LED) + if (leds_present & FE_WIFI_LED) led_classdev_resume(&wistron_wifi_led); } @@ -1296,7 +1296,7 @@ static int __devinit wistron_probe(struct platform_device *dev) if (have_wifi) { u16 wifi = bios_get_default_setting(WIFI); if (wifi & 1) - wifi_enabled = (wifi & 2) ? 1 : 0; + wifi_enabled = wifi & 2; else have_wifi = 0; @@ -1307,15 +1307,16 @@ static int __devinit wistron_probe(struct platform_device *dev) if (have_bluetooth) { u16 bt = bios_get_default_setting(BLUETOOTH); if (bt & 1) - bluetooth_enabled = (bt & 2) ? 1 : 0; + bluetooth_enabled = bt & 2; else - have_bluetooth = 0; + have_bluetooth = false; if (have_bluetooth) bios_set_state(BLUETOOTH, bluetooth_enabled); } wistron_led_init(&dev->dev); + err = setup_input_dev(); if (err) { bios_detach(); @@ -1336,7 +1337,7 @@ static int __devexit wistron_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int wistron_suspend(struct platform_device *dev, pm_message_t state) +static int wistron_suspend(struct device *dev) { if (have_wifi) bios_set_state(WIFI, 0); @@ -1345,10 +1346,11 @@ static int wistron_suspend(struct platform_device *dev, pm_message_t state) bios_set_state(BLUETOOTH, 0); wistron_led_suspend(); + return 0; } -static int wistron_resume(struct platform_device *dev) +static int wistron_resume(struct device *dev) { if (have_wifi) bios_set_state(WIFI, wifi_enabled); @@ -1357,24 +1359,30 @@ static int wistron_resume(struct platform_device *dev) bios_set_state(BLUETOOTH, bluetooth_enabled); wistron_led_resume(); + poll_bios(true); return 0; } -#else -#define wistron_suspend NULL -#define wistron_resume NULL + +static const struct dev_pm_ops wistron_pm_ops = { + .suspend = wistron_suspend, + .resume = wistron_resume, + .poweroff = wistron_suspend, + .restore = wistron_resume, +}; #endif static struct platform_driver wistron_driver = { .driver = { .name = "wistron-bios", .owner = THIS_MODULE, +#if CONFIG_PM + .pm = &wistron_pm_ops, +#endif }, .probe = wistron_probe, .remove = __devexit_p(wistron_remove), - .suspend = wistron_suspend, - .resume = wistron_resume, }; static int __init wb_module_init(void) -- cgit v0.10.2 From 6777f01728d5fc40e02cc0ae43639bf51cc247dd Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 7 Aug 2009 23:17:46 -0700 Subject: Input: hil_kbd - switch to use completion instead of semaphore Stop abusing semaphore for waiting, use completion instead. Also handle errors from input_register_device. Tested-by: Helge Deller Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index f732893..fe57044 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include @@ -81,135 +81,128 @@ struct hil_kbd { char exd[HIL_KBD_MAX_LENGTH]; /* EXD record */ char rnm[HIL_KBD_MAX_LENGTH + 1]; /* RNM record + NULL term. */ - /* Something to sleep around with. */ - struct semaphore sem; + struct completion cmd_done; }; -/* Process a complete packet after transfer from the HIL */ -static void hil_kbd_process_record(struct hil_kbd *kbd) +static bool hil_kbd_is_command_response(hil_packet p) { - struct input_dev *dev = kbd->dev; - hil_packet *data = kbd->data; - hil_packet p; - int idx, i, cnt; + if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) + return false; - idx = kbd->idx4/4; - p = data[idx - 1]; + if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) + return false; + + return true; +} + +static void hil_kbd_handle_command_response(struct hil_kbd *kbd) +{ + hil_packet p; + char *buf; + int i, idx; - if ((p & ~HIL_CMDCT_POL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) - goto report; - if ((p & ~HIL_CMDCT_RPL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) - goto report; + idx = kbd->idx4 / 4; + p = kbd->data[idx - 1]; - /* Not a poll response. See if we are loading config records. */ switch (p & HIL_PKT_DATA_MASK) { case HIL_CMD_IDD: - for (i = 0; i < idx; i++) - kbd->idd[i] = kbd->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_KBD_MAX_LENGTH; i++) - kbd->idd[i] = 0; + buf = kbd->idd; break; case HIL_CMD_RSC: - for (i = 0; i < idx; i++) - kbd->rsc[i] = kbd->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_KBD_MAX_LENGTH; i++) - kbd->rsc[i] = 0; + buf = kbd->rsc; break; case HIL_CMD_EXD: - for (i = 0; i < idx; i++) - kbd->exd[i] = kbd->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_KBD_MAX_LENGTH; i++) - kbd->exd[i] = 0; + buf = kbd->exd; break; case HIL_CMD_RNM: - for (i = 0; i < idx; i++) - kbd->rnm[i] = kbd->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_KBD_MAX_LENGTH + 1; i++) - kbd->rnm[i] = '\0'; + kbd->rnm[HIL_KBD_MAX_LENGTH] = 0; + buf = kbd->rnm; break; default: /* These occur when device isn't present */ - if (p == (HIL_ERR_INT | HIL_PKT_CMD)) - break; - /* Anything else we'd like to know about. */ - printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); - break; + if (p != (HIL_ERR_INT | HIL_PKT_CMD)) { + /* Anything else we'd like to know about. */ + printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); + } + goto out; } - goto out; - report: - cnt = 1; + for (i = 0; i < idx; i++) + buf[i] = kbd->data[i] & HIL_PKT_DATA_MASK; + for (; i < HIL_KBD_MAX_LENGTH; i++) + buf[i] = 0; + out: + complete(&kbd->cmd_done); +} + +static void hil_kbd_handle_key_events(struct hil_kbd *kbd) +{ + struct input_dev *dev = kbd->dev; + int idx = kbd->idx4 / 4; + int i; + switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) { case HIL_POL_CHARTYPE_NONE: - break; + return; case HIL_POL_CHARTYPE_ASCII: - while (cnt < idx - 1) - input_report_key(dev, kbd->data[cnt++] & 0x7f, 1); + for (i = 1; i < idx - 1; i++) + input_report_key(dev, kbd->data[i] & 0x7f, 1); break; case HIL_POL_CHARTYPE_RSVD1: case HIL_POL_CHARTYPE_RSVD2: case HIL_POL_CHARTYPE_BINARY: - while (cnt < idx - 1) - input_report_key(dev, kbd->data[cnt++], 1); + for (i = 1; i < idx - 1; i++) + input_report_key(dev, kbd->data[i], 1); break; case HIL_POL_CHARTYPE_SET1: - while (cnt < idx - 1) { - unsigned int key; - int up; - key = kbd->data[cnt++]; - up = key & HIL_KBD_SET1_UPBIT; + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET1_UPBIT; + key &= (~HIL_KBD_SET1_UPBIT & 0xff); key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT]; - if (key != KEY_RESERVED) - input_report_key(dev, key, !up); + input_report_key(dev, key, !up); } break; case HIL_POL_CHARTYPE_SET2: - while (cnt < idx - 1) { - unsigned int key; - int up; - key = kbd->data[cnt++]; - up = key & HIL_KBD_SET2_UPBIT; + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET2_UPBIT; + key &= (~HIL_KBD_SET1_UPBIT & 0xff); key = key >> HIL_KBD_SET2_SHIFT; - if (key != KEY_RESERVED) - input_report_key(dev, key, !up); + input_report_key(dev, key, !up); } break; case HIL_POL_CHARTYPE_SET3: - while (cnt < idx - 1) { - unsigned int key; - int up; - key = kbd->data[cnt++]; - up = key & HIL_KBD_SET3_UPBIT; + for (i = 1; i < idx - 1; i++) { + unsigned int key = kbd->data[i]; + int up = key & HIL_KBD_SET3_UPBIT; + key &= (~HIL_KBD_SET1_UPBIT & 0xff); key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT]; - if (key != KEY_RESERVED) - input_report_key(dev, key, !up); + input_report_key(dev, key, !up); } break; } - out: - kbd->idx4 = 0; - up(&kbd->sem); + + input_sync(dev); } static void hil_kbd_process_err(struct hil_kbd *kbd) { printk(KERN_WARNING PREFIX "errored HIL packet\n"); kbd->idx4 = 0; - up(&kbd->sem); + complete(&kbd->cmd_done); /* just in case somebody is waiting */ } static irqreturn_t hil_kbd_interrupt(struct serio *serio, @@ -222,11 +215,12 @@ static irqreturn_t hil_kbd_interrupt(struct serio *serio, kbd = serio_get_drvdata(serio); BUG_ON(kbd == NULL); - if (kbd->idx4 >= (HIL_KBD_MAX_LENGTH * sizeof(hil_packet))) { + if (kbd->idx4 >= HIL_KBD_MAX_LENGTH * sizeof(hil_packet)) { hil_kbd_process_err(kbd); - return IRQ_HANDLED; + goto out; } - idx = kbd->idx4/4; + + idx = kbd->idx4 / 4; if (!(kbd->idx4 % 4)) kbd->data[idx] = 0; packet = kbd->data[idx]; @@ -234,22 +228,25 @@ static irqreturn_t hil_kbd_interrupt(struct serio *serio, kbd->data[idx] = packet; /* Records of N 4-byte hil_packets must terminate with a command. */ - if ((++(kbd->idx4)) % 4) - return IRQ_HANDLED; - if ((packet & 0xffff0000) != HIL_ERR_INT) { - hil_kbd_process_err(kbd); - return IRQ_HANDLED; + if ((++kbd->idx4 % 4) == 0) { + if ((packet & 0xffff0000) != HIL_ERR_INT) { + hil_kbd_process_err(kbd); + } else if (packet & HIL_PKT_CMD) { + if (hil_kbd_is_command_response(packet)) + hil_kbd_handle_command_response(kbd); + else + hil_kbd_handle_key_events(kbd); + kbd->idx4 = 0; + } } - if (packet & HIL_PKT_CMD) - hil_kbd_process_record(kbd); + out: return IRQ_HANDLED; } static void hil_kbd_disconnect(struct serio *serio) { - struct hil_kbd *kbd; + struct hil_kbd *kbd = serio_get_drvdata(serio); - kbd = serio_get_drvdata(serio); BUG_ON(kbd == NULL); serio_close(serio); @@ -259,52 +256,64 @@ static void hil_kbd_disconnect(struct serio *serio) static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) { - struct hil_kbd *kbd; - uint8_t did, *idd; - int i; + struct hil_kbd *kbd; + struct input_dev *input_dev; + uint8_t did, *idd; + int i; + int error; kbd = kzalloc(sizeof(*kbd), GFP_KERNEL); - if (!kbd) - return -ENOMEM; - - kbd->dev = input_allocate_device(); - if (!kbd->dev) + input_dev = input_allocate_device(); + if (!kbd || !input_dev) { + error = -ENOMEM; goto bail0; + } - if (serio_open(serio, drv)) - goto bail1; - - serio_set_drvdata(serio, kbd); kbd->serio = serio; + kbd->dev = input_dev; + + error = serio_open(serio, drv); + if (error) + goto bail0; - init_MUTEX_LOCKED(&kbd->sem); + serio_set_drvdata(serio, kbd); /* Get device info. MLC driver supplies devid/status/etc. */ + init_completion(&kbd->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_IDD); - down(&kbd->sem); + error = wait_for_completion_killable(&kbd->cmd_done); + if (error) + goto bail1; + init_completion(&kbd->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_RSC); - down(&kbd->sem); + error = wait_for_completion_killable(&kbd->cmd_done); + if (error) + goto bail1; + init_completion(&kbd->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_RNM); - down(&kbd->sem); + error = wait_for_completion_killable(&kbd->cmd_done); + if (error) + goto bail1; + init_completion(&kbd->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_EXD); - down(&kbd->sem); - - up(&kbd->sem); + error = wait_for_completion_killable(&kbd->cmd_done); + if (error) + goto bail1; did = kbd->idd[0]; idd = kbd->idd + 1; @@ -317,55 +326,54 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]); break; default: - goto bail2; + goto bail1; } if (HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) { printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n"); - goto bail2; + goto bail1; } - kbd->dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - kbd->dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | - BIT_MASK(LED_SCROLLL); - kbd->dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; - kbd->dev->keycodesize = sizeof(hil_kbd_set1[0]); - kbd->dev->keycode = hil_kbd_set1; - kbd->dev->name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME; - kbd->dev->phys = "hpkbd/input0"; /* XXX */ - - kbd->dev->id.bustype = BUS_HIL; - kbd->dev->id.vendor = PCI_VENDOR_ID_HP; - kbd->dev->id.product = 0x0001; /* TODO: get from kbd->rsc */ - kbd->dev->id.version = 0x0100; /* TODO: get from kbd->rsc */ - kbd->dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | + BIT_MASK(LED_SCROLLL); + input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; + input_dev->keycodesize = sizeof(hil_kbd_set1[0]); + input_dev->keycode = hil_kbd_set1; + input_dev->name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME; + input_dev->phys = "hpkbd/input0"; /* XXX */ + + input_dev->id.bustype = BUS_HIL; + input_dev->id.vendor = PCI_VENDOR_ID_HP; + input_dev->id.product = 0x0001; /* TODO: get from kbd->rsc */ + input_dev->id.version = 0x0100; /* TODO: get from kbd->rsc */ + input_dev->dev.parent = &serio->dev; for (i = 0; i < 128; i++) { - set_bit(hil_kbd_set1[i], kbd->dev->keybit); - set_bit(hil_kbd_set3[i], kbd->dev->keybit); + __set_bit(hil_kbd_set1[i], input_dev->keybit); + __set_bit(hil_kbd_set3[i], input_dev->keybit); } - clear_bit(0, kbd->dev->keybit); - - input_register_device(kbd->dev); - printk(KERN_INFO "input: %s, ID: %d\n", - kbd->dev->name, did); + __clear_bit(KEY_RESERVED, input_dev->keybit); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */ - down(&kbd->sem); - up(&kbd->sem); + /* No need to wait for completion */ + + error = input_register_device(kbd->dev); + if (error) + goto bail1; return 0; - bail2: + + bail1: serio_close(serio); serio_set_drvdata(serio, NULL); - bail1: - input_free_device(kbd->dev); bail0: + input_free_device(input_dev); kfree(kbd); - return -EIO; + return error; } static struct serio_device_id hil_kbd_ids[] = { -- cgit v0.10.2 From 1437dc3089911d42180be11c50a0b960250a1d87 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 7 Aug 2009 23:17:47 -0700 Subject: Input: hil_kbd - prepare for merging with hil_ptr Rename functions and variables from [hil_]kbd to [hil_]dev in preparation of merging hil_kbd and hil_ptr. Tested-by: Helge Deller Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index fe57044..235a669 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -49,7 +49,7 @@ MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver"); MODULE_LICENSE("Dual BSD/GPL"); MODULE_ALIAS("serio:ty03pr25id00ex*"); -#define HIL_KBD_MAX_LENGTH 16 +#define HIL_PACKET_MAX_LENGTH 16 #define HIL_KBD_SET1_UPBIT 0x01 #define HIL_KBD_SET1_SHIFT 1 @@ -67,24 +67,24 @@ static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly = static const char hil_language[][16] = { HIL_LOCALE_MAP }; -struct hil_kbd { +struct hil_dev { struct input_dev *dev; struct serio *serio; /* Input buffer and index for packets from HIL bus. */ - hil_packet data[HIL_KBD_MAX_LENGTH]; + hil_packet data[HIL_PACKET_MAX_LENGTH]; int idx4; /* four counts per packet */ /* Raw device info records from HIL bus, see hil.h for fields. */ - char idd[HIL_KBD_MAX_LENGTH]; /* DID byte and IDD record */ - char rsc[HIL_KBD_MAX_LENGTH]; /* RSC record */ - char exd[HIL_KBD_MAX_LENGTH]; /* EXD record */ - char rnm[HIL_KBD_MAX_LENGTH + 1]; /* RNM record + NULL term. */ + char idd[HIL_PACKET_MAX_LENGTH]; /* DID byte and IDD record */ + char rsc[HIL_PACKET_MAX_LENGTH]; /* RSC record */ + char exd[HIL_PACKET_MAX_LENGTH]; /* EXD record */ + char rnm[HIL_PACKET_MAX_LENGTH + 1]; /* RNM record + NULL term. */ struct completion cmd_done; }; -static bool hil_kbd_is_command_response(hil_packet p) +static bool hil_dev_is_command_response(hil_packet p) { if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) return false; @@ -95,31 +95,31 @@ static bool hil_kbd_is_command_response(hil_packet p) return true; } -static void hil_kbd_handle_command_response(struct hil_kbd *kbd) +static void hil_dev_handle_command_response(struct hil_dev *dev) { hil_packet p; char *buf; int i, idx; - idx = kbd->idx4 / 4; - p = kbd->data[idx - 1]; + idx = dev->idx4 / 4; + p = dev->data[idx - 1]; switch (p & HIL_PKT_DATA_MASK) { case HIL_CMD_IDD: - buf = kbd->idd; + buf = dev->idd; break; case HIL_CMD_RSC: - buf = kbd->rsc; + buf = dev->rsc; break; case HIL_CMD_EXD: - buf = kbd->exd; + buf = dev->exd; break; case HIL_CMD_RNM: - kbd->rnm[HIL_KBD_MAX_LENGTH] = 0; - buf = kbd->rnm; + dev->rnm[HIL_PACKET_MAX_LENGTH] = 0; + buf = dev->rnm; break; default: @@ -132,14 +132,14 @@ static void hil_kbd_handle_command_response(struct hil_kbd *kbd) } for (i = 0; i < idx; i++) - buf[i] = kbd->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_KBD_MAX_LENGTH; i++) + buf[i] = dev->data[i] & HIL_PKT_DATA_MASK; + for (; i < HIL_PACKET_MAX_LENGTH; i++) buf[i] = 0; out: - complete(&kbd->cmd_done); + complete(&dev->cmd_done); } -static void hil_kbd_handle_key_events(struct hil_kbd *kbd) +static void hil_dev_handle_key_events(struct hil_dev *kbd) { struct input_dev *dev = kbd->dev; int idx = kbd->idx4 / 4; @@ -198,125 +198,125 @@ static void hil_kbd_handle_key_events(struct hil_kbd *kbd) input_sync(dev); } -static void hil_kbd_process_err(struct hil_kbd *kbd) +static void hil_dev_process_err(struct hil_dev *dev) { printk(KERN_WARNING PREFIX "errored HIL packet\n"); - kbd->idx4 = 0; - complete(&kbd->cmd_done); /* just in case somebody is waiting */ + dev->idx4 = 0; + complete(&dev->cmd_done); /* just in case somebody is waiting */ } -static irqreturn_t hil_kbd_interrupt(struct serio *serio, +static irqreturn_t hil_dev_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { - struct hil_kbd *kbd; + struct hil_dev *dev; hil_packet packet; int idx; - kbd = serio_get_drvdata(serio); - BUG_ON(kbd == NULL); + dev = serio_get_drvdata(serio); + BUG_ON(dev == NULL); - if (kbd->idx4 >= HIL_KBD_MAX_LENGTH * sizeof(hil_packet)) { - hil_kbd_process_err(kbd); + if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) { + hil_dev_process_err(dev); goto out; } - idx = kbd->idx4 / 4; - if (!(kbd->idx4 % 4)) - kbd->data[idx] = 0; - packet = kbd->data[idx]; - packet |= ((hil_packet)data) << ((3 - (kbd->idx4 % 4)) * 8); - kbd->data[idx] = packet; + idx = dev->idx4 / 4; + if (!(dev->idx4 % 4)) + dev->data[idx] = 0; + packet = dev->data[idx]; + packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8); + dev->data[idx] = packet; /* Records of N 4-byte hil_packets must terminate with a command. */ - if ((++kbd->idx4 % 4) == 0) { + if ((++dev->idx4 % 4) == 0) { if ((packet & 0xffff0000) != HIL_ERR_INT) { - hil_kbd_process_err(kbd); + hil_dev_process_err(dev); } else if (packet & HIL_PKT_CMD) { - if (hil_kbd_is_command_response(packet)) - hil_kbd_handle_command_response(kbd); + if (hil_dev_is_command_response(packet)) + hil_dev_handle_command_response(dev); else - hil_kbd_handle_key_events(kbd); - kbd->idx4 = 0; + hil_dev_handle_key_events(dev); + dev->idx4 = 0; } } out: return IRQ_HANDLED; } -static void hil_kbd_disconnect(struct serio *serio) +static void hil_dev_disconnect(struct serio *serio) { - struct hil_kbd *kbd = serio_get_drvdata(serio); + struct hil_dev *dev = serio_get_drvdata(serio); - BUG_ON(kbd == NULL); + BUG_ON(dev == NULL); serio_close(serio); - input_unregister_device(kbd->dev); - kfree(kbd); + input_unregister_device(dev->dev); + kfree(dev); } -static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) +static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) { - struct hil_kbd *kbd; + struct hil_dev *dev; struct input_dev *input_dev; uint8_t did, *idd; int i; int error; - kbd = kzalloc(sizeof(*kbd), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); input_dev = input_allocate_device(); - if (!kbd || !input_dev) { + if (!dev || !input_dev) { error = -ENOMEM; goto bail0; } - kbd->serio = serio; - kbd->dev = input_dev; + dev->serio = serio; + dev->dev = input_dev; error = serio_open(serio, drv); if (error) goto bail0; - serio_set_drvdata(serio, kbd); + serio_set_drvdata(serio, dev); /* Get device info. MLC driver supplies devid/status/etc. */ - init_completion(&kbd->cmd_done); + init_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_IDD); - error = wait_for_completion_killable(&kbd->cmd_done); + error = wait_for_completion_killable(&dev->cmd_done); if (error) goto bail1; - init_completion(&kbd->cmd_done); + init_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_RSC); - error = wait_for_completion_killable(&kbd->cmd_done); + error = wait_for_completion_killable(&dev->cmd_done); if (error) goto bail1; - init_completion(&kbd->cmd_done); + init_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_RNM); - error = wait_for_completion_killable(&kbd->cmd_done); + error = wait_for_completion_killable(&dev->cmd_done); if (error) goto bail1; - init_completion(&kbd->cmd_done); + init_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); serio_write(serio, HIL_CMD_EXD); - error = wait_for_completion_killable(&kbd->cmd_done); + error = wait_for_completion_killable(&dev->cmd_done); if (error) goto bail1; - did = kbd->idd[0]; - idd = kbd->idd + 1; + did = dev->idd[0]; + idd = dev->idd + 1; switch (did & HIL_IDD_DID_TYPE_MASK) { case HIL_IDD_DID_TYPE_KB_INTEGRAL: case HIL_IDD_DID_TYPE_KB_ITF: @@ -340,7 +340,7 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; input_dev->keycodesize = sizeof(hil_kbd_set1[0]); input_dev->keycode = hil_kbd_set1; - input_dev->name = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME; + input_dev->name = strlen(dev->rnm) ? dev->rnm : HIL_GENERIC_NAME; input_dev->phys = "hpkbd/input0"; /* XXX */ input_dev->id.bustype = BUS_HIL; @@ -361,7 +361,7 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) serio_write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */ /* No need to wait for completion */ - error = input_register_device(kbd->dev); + error = input_register_device(input_dev); if (error) goto bail1; @@ -372,11 +372,11 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, NULL); bail0: input_free_device(input_dev); - kfree(kbd); + kfree(dev); return error; } -static struct serio_device_id hil_kbd_ids[] = { +static struct serio_device_id hil_dev_ids[] = { { .type = SERIO_HIL_MLC, .proto = SERIO_HIL, @@ -386,26 +386,26 @@ static struct serio_device_id hil_kbd_ids[] = { { 0 } }; -static struct serio_driver hil_kbd_serio_drv = { +static struct serio_driver hil_serio_drv = { .driver = { .name = "hil_kbd", }, .description = "HP HIL keyboard driver", - .id_table = hil_kbd_ids, - .connect = hil_kbd_connect, - .disconnect = hil_kbd_disconnect, - .interrupt = hil_kbd_interrupt + .id_table = hil_dev_ids, + .connect = hil_dev_connect, + .disconnect = hil_dev_disconnect, + .interrupt = hil_dev_interrupt }; -static int __init hil_kbd_init(void) +static int __init hil_dev_init(void) { - return serio_register_driver(&hil_kbd_serio_drv); + return serio_register_driver(&hil_serio_drv); } -static void __exit hil_kbd_exit(void) +static void __exit hil_dev_exit(void) { - serio_unregister_driver(&hil_kbd_serio_drv); + serio_unregister_driver(&hil_serio_drv); } -module_init(hil_kbd_init); -module_exit(hil_kbd_exit); +module_init(hil_dev_init); +module_exit(hil_dev_exit); -- cgit v0.10.2 From fa71c605c2bb4d816514c2611ad53f48007f1fd3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 7 Aug 2009 23:17:47 -0700 Subject: Input: combine hil_kbd and hil_ptr drivers hil_kbd and hil_ptr look like twins so it makes sense to combine them into a single driver. [deller@gmx.de: add MODULE_ALIAS() entry for mouse] Tested-by: Helge Deller Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a6b989a..5239e25 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -187,7 +187,7 @@ config KEYBOARD_HIL_OLD submenu. config KEYBOARD_HIL - tristate "HP HIL keyboard support" + tristate "HP HIL keyboard/pointer support" depends on GSC || HP300 default y select HP_SDC @@ -196,7 +196,8 @@ config KEYBOARD_HIL help The "Human Interface Loop" is a older, 8-channel USB-like controller used in several Hewlett Packard models. - This driver implements support for HIL-keyboards attached + This driver implements support for HIL-keyboards and pointing + devices (mice, tablets, touchscreens) attached to your machine, so normally you should say Y here. config KEYBOARD_HP6XX diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index 235a669..c83f4b2 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -41,13 +41,13 @@ #include #include -#define PREFIX "HIL KEYB: " -#define HIL_GENERIC_NAME "HIL keyboard" +#define PREFIX "HIL: " MODULE_AUTHOR("Brian S. Julin "); -MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver"); +MODULE_DESCRIPTION("HIL keyboard/mouse driver"); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_ALIAS("serio:ty03pr25id00ex*"); +MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */ +MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */ #define HIL_PACKET_MAX_LENGTH 16 @@ -82,6 +82,11 @@ struct hil_dev { char rnm[HIL_PACKET_MAX_LENGTH + 1]; /* RNM record + NULL term. */ struct completion cmd_done; + + bool is_pointer; + /* Extra device details needed for pointing devices. */ + unsigned int nbtn, naxes; + unsigned int btnmap[7]; }; static bool hil_dev_is_command_response(hil_packet p) @@ -139,7 +144,7 @@ static void hil_dev_handle_command_response(struct hil_dev *dev) complete(&dev->cmd_done); } -static void hil_dev_handle_key_events(struct hil_dev *kbd) +static void hil_dev_handle_kbd_events(struct hil_dev *kbd) { struct input_dev *dev = kbd->dev; int idx = kbd->idx4 / 4; @@ -198,6 +203,67 @@ static void hil_dev_handle_key_events(struct hil_dev *kbd) input_sync(dev); } +static void hil_dev_handle_ptr_events(struct hil_dev *ptr) +{ + struct input_dev *dev = ptr->dev; + int idx = ptr->idx4 / 4; + hil_packet p = ptr->data[idx - 1]; + int i, cnt, laxis; + bool absdev, ax16; + + if ((p & HIL_CMDCT_POL) != idx - 1) { + printk(KERN_WARNING PREFIX + "Malformed poll packet %x (idx = %i)\n", p, idx); + return; + } + + i = (p & HIL_POL_AXIS_ALT) ? 3 : 0; + laxis = (p & HIL_POL_NUM_AXES_MASK) + i; + + ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ + absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; + + for (cnt = 1; i < laxis; i++) { + unsigned int lo, hi, val; + + lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK; + hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0; + + if (absdev) { + val = lo + (hi << 8); +#ifdef TABLET_AUTOADJUST + if (val < dev->absmin[ABS_X + i]) + dev->absmin[ABS_X + i] = val; + if (val > dev->absmax[ABS_X + i]) + dev->absmax[ABS_X + i] = val; +#endif + if (i%3) val = dev->absmax[ABS_X + i] - val; + input_report_abs(dev, ABS_X + i, val); + } else { + val = (int) (((int8_t)lo) | ((int8_t)hi << 8)); + if (i % 3) + val *= -1; + input_report_rel(dev, REL_X + i, val); + } + } + + while (cnt < idx - 1) { + unsigned int btn = ptr->data[cnt++]; + int up = btn & 1; + + btn &= 0xfe; + if (btn == 0x8e) + continue; /* TODO: proximity == touch? */ + if (btn > 0x8c || btn < 0x80) + continue; + btn = (btn - 0x80) >> 1; + btn = ptr->btnmap[btn]; + input_report_key(dev, btn, !up); + } + + input_sync(dev); +} + static void hil_dev_process_err(struct hil_dev *dev) { printk(KERN_WARNING PREFIX "errored HIL packet\n"); @@ -234,8 +300,10 @@ static irqreturn_t hil_dev_interrupt(struct serio *serio, } else if (packet & HIL_PKT_CMD) { if (hil_dev_is_command_response(packet)) hil_dev_handle_command_response(dev); + else if (dev->is_pointer) + hil_dev_handle_ptr_events(dev); else - hil_dev_handle_key_events(dev); + hil_dev_handle_kbd_events(dev); dev->idx4 = 0; } } @@ -251,15 +319,130 @@ static void hil_dev_disconnect(struct serio *serio) serio_close(serio); input_unregister_device(dev->dev); + serio_set_drvdata(serio, NULL); kfree(dev); } +static void hil_dev_keyboard_setup(struct hil_dev *kbd) +{ + struct input_dev *input_dev = kbd->dev; + uint8_t did = kbd->idd[0]; + int i; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | + BIT_MASK(LED_SCROLLL); + + for (i = 0; i < 128; i++) { + __set_bit(hil_kbd_set1[i], input_dev->keybit); + __set_bit(hil_kbd_set3[i], input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; + input_dev->keycodesize = sizeof(hil_kbd_set1[0]); + input_dev->keycode = hil_kbd_set1; + + input_dev->name = strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard"; + input_dev->phys = "hpkbd/input0"; + + printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", + did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]); +} + +static void hil_dev_pointer_setup(struct hil_dev *ptr) +{ + struct input_dev *input_dev = ptr->dev; + uint8_t did = ptr->idd[0]; + uint8_t *idd = ptr->idd + 1; + unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd); + unsigned int i, btntype; + const char *txt; + + ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); + + switch (did & HIL_IDD_DID_TYPE_MASK) { + case HIL_IDD_DID_TYPE_REL: + input_dev->evbit[0] = BIT_MASK(EV_REL); + + for (i = 0; i < ptr->naxes; i++) + __set_bit(REL_X + i, input_dev->relbit); + + for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) + __set_bit(REL_X + i, input_dev->relbit); + + txt = "relative"; + break; + + case HIL_IDD_DID_TYPE_ABS: + input_dev->evbit[0] = BIT_MASK(EV_ABS); + + for (i = 0; i < ptr->naxes; i++) + input_set_abs_params(input_dev, ABS_X + i, + 0, HIL_IDD_AXIS_MAX(idd, i), 0, 0); + + for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) + input_set_abs_params(input_dev, ABS_X + i, + 0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0); + +#ifdef TABLET_AUTOADJUST + for (i = 0; i < ABS_MAX; i++) { + int diff = input_dev->absmax[ABS_X + i] / 10; + input_dev->absmin[ABS_X + i] += diff; + input_dev->absmax[ABS_X + i] -= diff; + } +#endif + + txt = "absolute"; + break; + + default: + BUG(); + } + + ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); + if (ptr->nbtn) + input_dev->evbit[0] |= BIT_MASK(EV_KEY); + + btntype = BTN_MISC; + if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) +#ifdef TABLET_SIMULATES_MOUSE + btntype = BTN_TOUCH; +#else + btntype = BTN_DIGI; +#endif + if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) + btntype = BTN_TOUCH; + + if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) + btntype = BTN_MOUSE; + + for (i = 0; i < ptr->nbtn; i++) { + __set_bit(btntype | i, input_dev->keybit); + ptr->btnmap[i] = btntype | i; + } + + if (btntype == BTN_MOUSE) { + /* Swap buttons 2 and 3 */ + ptr->btnmap[1] = BTN_MIDDLE; + ptr->btnmap[2] = BTN_RIGHT; + } + + input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device"; + + printk(KERN_INFO PREFIX + "HIL pointer device found (did: 0x%02x, axis: %s)\n", + did, txt); + printk(KERN_INFO PREFIX + "HIL pointer has %i buttons and %i sets of %i axes\n", + ptr->nbtn, naxsets, ptr->naxes); +} + static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) { struct hil_dev *dev; struct input_dev *input_dev; uint8_t did, *idd; - int i; int error; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -317,49 +500,47 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) did = dev->idd[0]; idd = dev->idd + 1; + switch (did & HIL_IDD_DID_TYPE_MASK) { case HIL_IDD_DID_TYPE_KB_INTEGRAL: case HIL_IDD_DID_TYPE_KB_ITF: case HIL_IDD_DID_TYPE_KB_RSVD: case HIL_IDD_DID_TYPE_CHAR: - printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", - did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]); + if (HIL_IDD_NUM_BUTTONS(idd) || + HIL_IDD_NUM_AXES_PER_SET(*idd)) { + printk(KERN_INFO PREFIX + "combo devices are not supported.\n"); + goto bail1; + } + + dev->is_pointer = false; + hil_dev_keyboard_setup(dev); break; - default: - goto bail1; - } - if (HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) { - printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n"); + case HIL_IDD_DID_TYPE_REL: + case HIL_IDD_DID_TYPE_ABS: + dev->is_pointer = true; + hil_dev_pointer_setup(dev); + break; + + default: goto bail1; } - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | - BIT_MASK(LED_SCROLLL); - input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; - input_dev->keycodesize = sizeof(hil_kbd_set1[0]); - input_dev->keycode = hil_kbd_set1; - input_dev->name = strlen(dev->rnm) ? dev->rnm : HIL_GENERIC_NAME; - input_dev->phys = "hpkbd/input0"; /* XXX */ - input_dev->id.bustype = BUS_HIL; input_dev->id.vendor = PCI_VENDOR_ID_HP; input_dev->id.product = 0x0001; /* TODO: get from kbd->rsc */ input_dev->id.version = 0x0100; /* TODO: get from kbd->rsc */ input_dev->dev.parent = &serio->dev; - for (i = 0; i < 128; i++) { - __set_bit(hil_kbd_set1[i], input_dev->keybit); - __set_bit(hil_kbd_set3[i], input_dev->keybit); + if (!dev->is_pointer) { + serio_write(serio, 0); + serio_write(serio, 0); + serio_write(serio, HIL_PKT_CMD >> 8); + /* Enable Keyswitch Autorepeat 1 */ + serio_write(serio, HIL_CMD_EK1); + /* No need to wait for completion */ } - __clear_bit(KEY_RESERVED, input_dev->keybit); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */ - /* No need to wait for completion */ error = input_register_device(input_dev); if (error) @@ -388,9 +569,9 @@ static struct serio_device_id hil_dev_ids[] = { static struct serio_driver hil_serio_drv = { .driver = { - .name = "hil_kbd", + .name = "hil_dev", }, - .description = "HP HIL keyboard driver", + .description = "HP HIL keyboard/mouse/tablet driver", .id_table = hil_dev_ids, .connect = hil_dev_connect, .disconnect = hil_dev_disconnect, diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 8a2c5b1..90bef5d 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -262,14 +262,6 @@ config MOUSE_VSXXXAA described in the source file). This driver also works with the digitizer (VSXXX-AB) DEC produced. -config MOUSE_HIL - tristate "HIL pointers (mice etc)." - depends on GSC || HP300 - select HP_SDC - select HIL_MLC - help - Say Y here to support HIL pointers. - config MOUSE_GPIO tristate "GPIO mouse" depends on GENERIC_GPIO diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 010f265..ea58c9a 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o -obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c deleted file mode 100644 index cd12c2d..0000000 --- a/drivers/input/mouse/hil_ptr.c +++ /dev/null @@ -1,447 +0,0 @@ -/* - * Generic linux-input device driver for axis-bearing devices - * - * Copyright (c) 2001 Brian S. Julin - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL"). - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * - * References: - * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define PREFIX "HIL PTR: " -#define HIL_GENERIC_NAME "HIL pointer device" - -MODULE_AUTHOR("Brian S. Julin "); -MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_ALIAS("serio:ty03pr25id0Fex*"); - -#define TABLET_SIMULATES_MOUSE /* allow tablet to be used as mouse */ -#undef TABLET_AUTOADJUST /* auto-adjust valid tablet ranges */ - - -#define HIL_PTR_MAX_LENGTH 16 - -struct hil_ptr { - struct input_dev *dev; - struct serio *serio; - - /* Input buffer and index for packets from HIL bus. */ - hil_packet data[HIL_PTR_MAX_LENGTH]; - int idx4; /* four counts per packet */ - - /* Raw device info records from HIL bus, see hil.h for fields. */ - char idd[HIL_PTR_MAX_LENGTH]; /* DID byte and IDD record */ - char rsc[HIL_PTR_MAX_LENGTH]; /* RSC record */ - char exd[HIL_PTR_MAX_LENGTH]; /* EXD record */ - char rnm[HIL_PTR_MAX_LENGTH + 1]; /* RNM record + NULL term. */ - - /* Extra device details not contained in struct input_dev. */ - unsigned int nbtn, naxes; - unsigned int btnmap[7]; - - /* Something to sleep around with. */ - struct semaphore sem; -}; - -/* Process a complete packet after transfer from the HIL */ -static void hil_ptr_process_record(struct hil_ptr *ptr) -{ - struct input_dev *dev = ptr->dev; - hil_packet *data = ptr->data; - hil_packet p; - int idx, i, cnt, laxis; - int ax16, absdev; - - idx = ptr->idx4/4; - p = data[idx - 1]; - - if ((p & ~HIL_CMDCT_POL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) - goto report; - if ((p & ~HIL_CMDCT_RPL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) - goto report; - - /* Not a poll response. See if we are loading config records. */ - switch (p & HIL_PKT_DATA_MASK) { - case HIL_CMD_IDD: - for (i = 0; i < idx; i++) - ptr->idd[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->idd[i] = 0; - break; - - case HIL_CMD_RSC: - for (i = 0; i < idx; i++) - ptr->rsc[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->rsc[i] = 0; - break; - - case HIL_CMD_EXD: - for (i = 0; i < idx; i++) - ptr->exd[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->exd[i] = 0; - break; - - case HIL_CMD_RNM: - for (i = 0; i < idx; i++) - ptr->rnm[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH + 1; i++) - ptr->rnm[i] = 0; - break; - - default: - /* These occur when device isn't present */ - if (p == (HIL_ERR_INT | HIL_PKT_CMD)) - break; - /* Anything else we'd like to know about. */ - printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); - break; - } - goto out; - - report: - if ((p & HIL_CMDCT_POL) != idx - 1) { - printk(KERN_WARNING PREFIX - "Malformed poll packet %x (idx = %i)\n", p, idx); - goto out; - } - - i = (ptr->data[0] & HIL_POL_AXIS_ALT) ? 3 : 0; - laxis = ptr->data[0] & HIL_POL_NUM_AXES_MASK; - laxis += i; - - ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ - absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; - - for (cnt = 1; i < laxis; i++) { - unsigned int lo,hi,val; - lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK; - hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0; - if (absdev) { - val = lo + (hi<<8); -#ifdef TABLET_AUTOADJUST - if (val < dev->absmin[ABS_X + i]) - dev->absmin[ABS_X + i] = val; - if (val > dev->absmax[ABS_X + i]) - dev->absmax[ABS_X + i] = val; -#endif - if (i%3) val = dev->absmax[ABS_X + i] - val; - input_report_abs(dev, ABS_X + i, val); - } else { - val = (int) (((int8_t)lo) | ((int8_t)hi<<8)); - if (i%3) - val *= -1; - input_report_rel(dev, REL_X + i, val); - } - } - - while (cnt < idx - 1) { - unsigned int btn; - int up; - btn = ptr->data[cnt++]; - up = btn & 1; - btn &= 0xfe; - if (btn == 0x8e) - continue; /* TODO: proximity == touch? */ - else - if ((btn > 0x8c) || (btn < 0x80)) - continue; - btn = (btn - 0x80) >> 1; - btn = ptr->btnmap[btn]; - input_report_key(dev, btn, !up); - } - input_sync(dev); - out: - ptr->idx4 = 0; - up(&ptr->sem); -} - -static void hil_ptr_process_err(struct hil_ptr *ptr) -{ - printk(KERN_WARNING PREFIX "errored HIL packet\n"); - ptr->idx4 = 0; - up(&ptr->sem); -} - -static irqreturn_t hil_ptr_interrupt(struct serio *serio, - unsigned char data, unsigned int flags) -{ - struct hil_ptr *ptr; - hil_packet packet; - int idx; - - ptr = serio_get_drvdata(serio); - BUG_ON(ptr == NULL); - - if (ptr->idx4 >= (HIL_PTR_MAX_LENGTH * sizeof(hil_packet))) { - hil_ptr_process_err(ptr); - return IRQ_HANDLED; - } - idx = ptr->idx4/4; - if (!(ptr->idx4 % 4)) - ptr->data[idx] = 0; - packet = ptr->data[idx]; - packet |= ((hil_packet)data) << ((3 - (ptr->idx4 % 4)) * 8); - ptr->data[idx] = packet; - - /* Records of N 4-byte hil_packets must terminate with a command. */ - if ((++(ptr->idx4)) % 4) - return IRQ_HANDLED; - if ((packet & 0xffff0000) != HIL_ERR_INT) { - hil_ptr_process_err(ptr); - return IRQ_HANDLED; - } - if (packet & HIL_PKT_CMD) - hil_ptr_process_record(ptr); - - return IRQ_HANDLED; -} - -static void hil_ptr_disconnect(struct serio *serio) -{ - struct hil_ptr *ptr; - - ptr = serio_get_drvdata(serio); - BUG_ON(ptr == NULL); - - serio_close(serio); - input_unregister_device(ptr->dev); - kfree(ptr); -} - -static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) -{ - struct hil_ptr *ptr; - const char *txt; - unsigned int i, naxsets, btntype; - uint8_t did, *idd; - int error; - - ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL); - if (!ptr) - return -ENOMEM; - - ptr->dev = input_allocate_device(); - if (!ptr->dev) { - error = -ENOMEM; - goto bail0; - } - - error = serio_open(serio, driver); - if (error) - goto bail1; - - serio_set_drvdata(serio, ptr); - ptr->serio = serio; - - init_MUTEX_LOCKED(&ptr->sem); - - /* Get device info. MLC driver supplies devid/status/etc. */ - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_IDD); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_RSC); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_RNM); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_EXD); - down(&ptr->sem); - - up(&ptr->sem); - - did = ptr->idd[0]; - idd = ptr->idd + 1; - txt = "unknown"; - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) { - ptr->dev->evbit[0] = BIT_MASK(EV_REL); - txt = "relative"; - } - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_ABS) { - ptr->dev->evbit[0] = BIT_MASK(EV_ABS); - txt = "absolute"; - } - - if (!ptr->dev->evbit[0]) { - error = -ENODEV; - goto bail2; - } - - ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); - if (ptr->nbtn) - ptr->dev->evbit[0] |= BIT_MASK(EV_KEY); - - naxsets = HIL_IDD_NUM_AXSETS(*idd); - ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); - - printk(KERN_INFO PREFIX "HIL pointer device found (did: 0x%02x, axis: %s)\n", - did, txt); - printk(KERN_INFO PREFIX "HIL pointer has %i buttons and %i sets of %i axes\n", - ptr->nbtn, naxsets, ptr->naxes); - - btntype = BTN_MISC; - if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) -#ifdef TABLET_SIMULATES_MOUSE - btntype = BTN_TOUCH; -#else - btntype = BTN_DIGI; -#endif - if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) - btntype = BTN_TOUCH; - - if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) - btntype = BTN_MOUSE; - - for (i = 0; i < ptr->nbtn; i++) { - set_bit(btntype | i, ptr->dev->keybit); - ptr->btnmap[i] = btntype | i; - } - - if (btntype == BTN_MOUSE) { - /* Swap buttons 2 and 3 */ - ptr->btnmap[1] = BTN_MIDDLE; - ptr->btnmap[2] = BTN_RIGHT; - } - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) { - for (i = 0; i < ptr->naxes; i++) - set_bit(REL_X + i, ptr->dev->relbit); - for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) - set_bit(REL_X + i, ptr->dev->relbit); - } else { - for (i = 0; i < ptr->naxes; i++) { - set_bit(ABS_X + i, ptr->dev->absbit); - ptr->dev->absmin[ABS_X + i] = 0; - ptr->dev->absmax[ABS_X + i] = - HIL_IDD_AXIS_MAX((ptr->idd + 1), i); - } - for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) { - set_bit(ABS_X + i, ptr->dev->absbit); - ptr->dev->absmin[ABS_X + i] = 0; - ptr->dev->absmax[ABS_X + i] = - HIL_IDD_AXIS_MAX((ptr->idd + 1), (i - 3)); - } -#ifdef TABLET_AUTOADJUST - for (i = 0; i < ABS_MAX; i++) { - int diff = ptr->dev->absmax[ABS_X + i] / 10; - ptr->dev->absmin[ABS_X + i] += diff; - ptr->dev->absmax[ABS_X + i] -= diff; - } -#endif - } - - ptr->dev->name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME; - - ptr->dev->id.bustype = BUS_HIL; - ptr->dev->id.vendor = PCI_VENDOR_ID_HP; - ptr->dev->id.product = 0x0001; /* TODO: get from ptr->rsc */ - ptr->dev->id.version = 0x0100; /* TODO: get from ptr->rsc */ - ptr->dev->dev.parent = &serio->dev; - - error = input_register_device(ptr->dev); - if (error) { - printk(KERN_INFO PREFIX "Unable to register input device\n"); - goto bail2; - } - - printk(KERN_INFO "input: %s (%s), ID: %d\n", - ptr->dev->name, - (btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad", - did); - - return 0; - - bail2: - serio_close(serio); - bail1: - input_free_device(ptr->dev); - bail0: - kfree(ptr); - serio_set_drvdata(serio, NULL); - return error; -} - -static struct serio_device_id hil_ptr_ids[] = { - { - .type = SERIO_HIL_MLC, - .proto = SERIO_HIL, - .id = SERIO_ANY, - .extra = SERIO_ANY, - }, - { 0 } -}; - -static struct serio_driver hil_ptr_serio_driver = { - .driver = { - .name = "hil_ptr", - }, - .description = "HP HIL mouse/tablet driver", - .id_table = hil_ptr_ids, - .connect = hil_ptr_connect, - .disconnect = hil_ptr_disconnect, - .interrupt = hil_ptr_interrupt -}; - -static int __init hil_ptr_init(void) -{ - return serio_register_driver(&hil_ptr_serio_driver); -} - -static void __exit hil_ptr_exit(void) -{ - serio_unregister_driver(&hil_ptr_serio_driver); -} - -module_init(hil_ptr_init); -module_exit(hil_ptr_exit); -- cgit v0.10.2 From 4a15235e79f5160a34100b362af2c674d191d0a5 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Sun, 9 Aug 2009 21:22:22 -0700 Subject: Input: add keypad driver for w90p910 Add keypad driver for the 4x4 keypad on an evaluation board based on w90p910. Signed-off-by: Wan ZongShun Reviewed-by: Trilok Soni Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h new file mode 100644 index 0000000..79462fa --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_W90P910_KEYPAD_H +#define __ASM_ARCH_W90P910_KEYPAD_H + +#include + +extern void mfp_set_groupi(struct device *dev); + +struct w90p910_keypad_platform_data { + + unsigned int prescale; + unsigned int debounce; + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + unsigned int *matrix_key_map; + int matrix_key_map_size; +}; + +#endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 5239e25..50e407d 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -362,4 +362,14 @@ config KEYBOARD_XTKBD To compile this driver as a module, choose M here: the module will be called xtkbd. +config KEYBOARD_W90P910 + tristate "W90P910 Matrix Keypad support" + depends on ARCH_W90X900 + help + Say Y here to enable the matrix keypad on evaluation board + based on W90P910. + + To compile this driver as a module, choose M here: the + module will be called w90p910_keypad. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index b5b5eae..1523030 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c new file mode 100644 index 0000000..472c705 --- /dev/null +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -0,0 +1,305 @@ +/* + * Copyright (c) 2008-2009 Nuvoton technology corporation. + * + * Wan ZongShun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Keypad Interface Control Registers */ +#define KPI_CONF 0x00 +#define KPI_3KCONF 0x04 +#define KPI_LPCONF 0x08 +#define KPI_STATUS 0x0C + +#define IS1KEY (0x01 << 16) +#define INTTR (0x01 << 21) +#define KEY0R (0x0f << 3) +#define KEY0C 0x07 +#define DEBOUNCE_BIT 0x08 +#define KSIZE0 (0x01 << 16) +#define KSIZE1 (0x01 << 17) +#define KPSEL (0x01 << 19) +#define ENKP (0x01 << 18) + +#define KGET_RAW(n) (((n) & KEY0R) >> 3) +#define KGET_COLUMN(n) ((n) & KEY0C) + +#define MAX_MATRIX_KEY_NUM (8 * 8) + +struct w90p910_keypad { + struct w90p910_keypad_platform_data *pdata; + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + int irq; + unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; +}; + +static void w90p910_keypad_build_keycode(struct w90p910_keypad *keypad) +{ + struct w90p910_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + unsigned int *key; + int i; + + key = &pdata->matrix_key_map[0]; + for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { + int row = KEY_ROW(*key); + int col = KEY_COL(*key); + int code = KEY_VAL(*key); + + keypad->matrix_keycodes[(row << 3) + col] = code; + __set_bit(code, input_dev->keybit); + } +} + +static inline unsigned int lookup_matrix_keycode( + struct w90p910_keypad *keypad, int row, int col) +{ + return keypad->matrix_keycodes[(row << 3) + col]; +} + +static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad, + unsigned int status) +{ + unsigned int row, col, val; + + row = KGET_RAW(status); + col = KGET_COLUMN(status); + + val = lookup_matrix_keycode(keypad, row, col); + + input_report_key(keypad->input_dev, val, 1); + + input_sync(keypad->input_dev); + + input_report_key(keypad->input_dev, val, 0); + + input_sync(keypad->input_dev); +} + +static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id) +{ + struct w90p910_keypad *keypad = dev_id; + unsigned int kstatus, val; + + kstatus = __raw_readl(keypad->mmio_base + KPI_STATUS); + + val = INTTR | IS1KEY; + + if (kstatus & val) + w90p910_keypad_scan_matrix(keypad, kstatus); + + return IRQ_HANDLED; +} + +static int w90p910_keypad_open(struct input_dev *dev) +{ + struct w90p910_keypad *keypad = input_get_drvdata(dev); + struct w90p910_keypad_platform_data *pdata = keypad->pdata; + unsigned int val, config; + + /* Enable unit clock */ + clk_enable(keypad->clk); + + val = __raw_readl(keypad->mmio_base + KPI_CONF); + val |= (KPSEL | ENKP); + val &= ~(KSIZE0 | KSIZE1); + + config = pdata->prescale | (pdata->debounce << DEBOUNCE_BIT); + + val |= config; + + __raw_writel(val, keypad->mmio_base + KPI_CONF); + + return 0; +} + +static void w90p910_keypad_close(struct input_dev *dev) +{ + struct w90p910_keypad *keypad = input_get_drvdata(dev); + + /* Disable clock unit */ + clk_disable(keypad->clk); +} + +static int __devinit w90p910_keypad_probe(struct platform_device *pdev) +{ + struct w90p910_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq, error; + + keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL); + if (keypad == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + keypad->pdata = pdev->dev.platform_data; + if (keypad->pdata == NULL) { + dev_err(&pdev->dev, "no platform data defined\n"); + error = -EINVAL; + goto failed_free; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + error = -ENXIO; + goto failed_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + error = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto failed_free; + } + + keypad->mmio_base = ioremap(res->start, resource_size(res)); + if (keypad->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto failed_free_mem; + } + + keypad->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + error = PTR_ERR(keypad->clk); + goto failed_free_io; + } + + /* Create and register the input driver. */ + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + error = -ENOMEM; + goto failed_put_clk; + } + + /* set multi-function pin for w90p910 kpi. */ + mfp_set_groupi(&pdev->dev); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = w90p910_keypad_open; + input_dev->close = w90p910_keypad_close; + input_dev->dev.parent = &pdev->dev; + input_dev->keycode = keypad->matrix_keycodes; + input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes); + + keypad->input_dev = input_dev; + input_set_drvdata(input_dev, keypad); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + w90p910_keypad_build_keycode(keypad); + platform_set_drvdata(pdev, keypad); + + error = request_irq(irq, w90p910_keypad_irq_handler, IRQF_DISABLED, + pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_free_dev; + } + + keypad->irq = irq; + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + return 0; + +failed_free_irq: + free_irq(irq, pdev); + platform_set_drvdata(pdev, NULL); +failed_free_dev: + input_free_device(input_dev); +failed_put_clk: + clk_put(keypad->clk); +failed_free_io: + iounmap(keypad->mmio_base); +failed_free_mem: + release_mem_region(res->start, resource_size(res)); +failed_free: + kfree(keypad); + return error; +} + +static int __devexit w90p910_keypad_remove(struct platform_device *pdev) +{ + struct w90p910_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(keypad->irq, pdev); + + clk_put(keypad->clk); + + input_unregister_device(keypad->input_dev); + + iounmap(keypad->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + platform_set_drvdata(pdev, NULL); + kfree(keypad); + return 0; +} + +static struct platform_driver w90p910_keypad_driver = { + .probe = w90p910_keypad_probe, + .remove = __devexit_p(w90p910_keypad_remove), + .driver = { + .name = "w90p910-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init w90p910_keypad_init(void) +{ + return platform_driver_register(&w90p910_keypad_driver); +} + +static void __exit w90p910_keypad_exit(void) +{ + platform_driver_unregister(&w90p910_keypad_driver); +} + +module_init(w90p910_keypad_init); +module_exit(w90p910_keypad_exit); + +MODULE_AUTHOR("Wan ZongShun "); +MODULE_DESCRIPTION("w90p910 keypad driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-keypad"); -- cgit v0.10.2 From 09113aea553cfaf074fd669cd0465daac4cea6e8 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 9 Aug 2009 21:22:22 -0700 Subject: Input: w90p910_keypad - adjust to use definitions from matrix_keypad.h Also have the driver send MSC_SCAN events as most keyboards do to aid in updating keymap from userspace. Tested-by: Wan ZongShun Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h index 79462fa..556778e 100644 --- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h +++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h @@ -6,13 +6,10 @@ extern void mfp_set_groupi(struct device *dev); struct w90p910_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; unsigned int prescale; unsigned int debounce; - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; }; #endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 472c705..24096cd 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -41,58 +41,34 @@ #define KGET_RAW(n) (((n) & KEY0R) >> 3) #define KGET_COLUMN(n) ((n) & KEY0C) -#define MAX_MATRIX_KEY_NUM (8 * 8) +#define W90P910_MAX_KEY_NUM (8 * 8) +#define W90P910_ROW_SHIFT 3 struct w90p910_keypad { - struct w90p910_keypad_platform_data *pdata; + const struct w90p910_keypad_platform_data *pdata; struct clk *clk; struct input_dev *input_dev; void __iomem *mmio_base; int irq; - unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; + unsigned short keymap[W90P910_MAX_KEY_NUM]; }; -static void w90p910_keypad_build_keycode(struct w90p910_keypad *keypad) -{ - struct w90p910_keypad_platform_data *pdata = keypad->pdata; - struct input_dev *input_dev = keypad->input_dev; - unsigned int *key; - int i; - - key = &pdata->matrix_key_map[0]; - for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { - int row = KEY_ROW(*key); - int col = KEY_COL(*key); - int code = KEY_VAL(*key); - - keypad->matrix_keycodes[(row << 3) + col] = code; - __set_bit(code, input_dev->keybit); - } -} - -static inline unsigned int lookup_matrix_keycode( - struct w90p910_keypad *keypad, int row, int col) -{ - return keypad->matrix_keycodes[(row << 3) + col]; -} - static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad, unsigned int status) { - unsigned int row, col, val; - - row = KGET_RAW(status); - col = KGET_COLUMN(status); - - val = lookup_matrix_keycode(keypad, row, col); - - input_report_key(keypad->input_dev, val, 1); - - input_sync(keypad->input_dev); - - input_report_key(keypad->input_dev, val, 0); - - input_sync(keypad->input_dev); + struct input_dev *input_dev = keypad->input_dev; + unsigned int row = KGET_RAW(status); + unsigned int col = KGET_COLUMN(status); + unsigned int code = MATRIX_SCAN_CODE(row, col, W90P910_ROW_SHIFT); + unsigned int key = keypad->keymap[code]; + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, key, 1); + input_sync(input_dev); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, key, 0); + input_sync(input_dev); } static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id) @@ -113,7 +89,7 @@ static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id) static int w90p910_keypad_open(struct input_dev *dev) { struct w90p910_keypad *keypad = input_get_drvdata(dev); - struct w90p910_keypad_platform_data *pdata = keypad->pdata; + const struct w90p910_keypad_platform_data *pdata = keypad->pdata; unsigned int val, config; /* Enable unit clock */ @@ -142,31 +118,39 @@ static void w90p910_keypad_close(struct input_dev *dev) static int __devinit w90p910_keypad_probe(struct platform_device *pdev) { + const struct w90p910_keypad_platform_data *pdata = + pdev->dev.platform_data; + const struct matrix_keymap_data *keymap_data = pdata->keymap_data; struct w90p910_keypad *keypad; struct input_dev *input_dev; struct resource *res; - int irq, error; - - keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL); - if (keypad == NULL) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); - return -ENOMEM; - } + int irq; + int error; + int i; - keypad->pdata = pdev->dev.platform_data; - if (keypad->pdata == NULL) { + if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); - error = -EINVAL; - goto failed_free; + return -EINVAL; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "failed to get keypad irq\n"); - error = -ENXIO; + return -ENXIO; + } + + keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + error = -ENOMEM; goto failed_free; } + keypad->pdata = pdata; + keypad->input_dev = input_dev; + keypad->irq = irq; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "failed to get I/O memory\n"); @@ -185,7 +169,7 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) if (keypad->mmio_base == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); error = -ENXIO; - goto failed_free_mem; + goto failed_free_res; } keypad->clk = clk_get(&pdev->dev, NULL); @@ -195,14 +179,6 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) goto failed_free_io; } - /* Create and register the input driver. */ - input_dev = input_allocate_device(); - if (!input_dev) { - dev_err(&pdev->dev, "failed to allocate input device\n"); - error = -ENOMEM; - goto failed_put_clk; - } - /* set multi-function pin for w90p910 kpi. */ mfp_set_groupi(&pdev->dev); @@ -211,26 +187,37 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) input_dev->open = w90p910_keypad_open; input_dev->close = w90p910_keypad_close; input_dev->dev.parent = &pdev->dev; - input_dev->keycode = keypad->matrix_keycodes; - input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]); - input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes); - keypad->input_dev = input_dev; + input_dev->keycode = keypad->keymap; + input_dev->keycodesize = sizeof(keypad->keymap[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keymap); + input_set_drvdata(input_dev, keypad); input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - w90p910_keypad_build_keycode(keypad); - platform_set_drvdata(pdev, keypad); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short keycode = KEY_VAL(key); + unsigned int scancode = MATRIX_SCAN_CODE(row, col, + W90P910_ROW_SHIFT); + + keypad->keymap[scancode] = keycode; + __set_bit(keycode, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + - error = request_irq(irq, w90p910_keypad_irq_handler, IRQF_DISABLED, - pdev->name, keypad); + error = request_irq(keypad->irq, w90p910_keypad_irq_handler, + IRQF_DISABLED, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); - goto failed_free_dev; + goto failed_put_clk; } - keypad->irq = irq; - /* Register the input device */ error = input_register_device(input_dev); if (error) { @@ -238,20 +225,19 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) goto failed_free_irq; } + platform_set_drvdata(pdev, keypad); return 0; failed_free_irq: free_irq(irq, pdev); - platform_set_drvdata(pdev, NULL); -failed_free_dev: - input_free_device(input_dev); failed_put_clk: clk_put(keypad->clk); failed_free_io: iounmap(keypad->mmio_base); -failed_free_mem: +failed_free_res: release_mem_region(res->start, resource_size(res)); failed_free: + input_free_device(input_dev); kfree(keypad); return error; } @@ -268,12 +254,12 @@ static int __devexit w90p910_keypad_remove(struct platform_device *pdev) input_unregister_device(keypad->input_dev); iounmap(keypad->mmio_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); platform_set_drvdata(pdev, NULL); kfree(keypad); + return 0; } -- cgit v0.10.2 From 25a70e38cd57952b09a013bf070e03705ee4f2ff Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 12 Aug 2009 00:50:09 -0700 Subject: Input: eeti_ts - allow active high irq lines This adds a struct eeti_ts_platform_data which currently holds only one value to specify the interrupt polarity. The driver has a fallback if no platform data is passed in via the i2c_board_info, so no regression is caused. Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 3ab9222..9029bd3 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -32,6 +32,7 @@ #include #include #include +#include static int flip_x; module_param(flip_x, bool, 0644); @@ -46,7 +47,7 @@ struct eeti_ts_priv { struct input_dev *input; struct work_struct work; struct mutex mutex; - int irq; + int irq, irq_active_high; }; #define EETI_TS_BITDEPTH (11) @@ -58,6 +59,11 @@ struct eeti_ts_priv { #define REPORT_BIT_HAS_PRESSURE (1 << 6) #define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH) +static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) +{ + return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; +} + static void eeti_ts_read(struct work_struct *work) { char buf[6]; @@ -67,7 +73,7 @@ static void eeti_ts_read(struct work_struct *work) mutex_lock(&priv->mutex); - while (!gpio_get_value(irq_to_gpio(priv->irq)) && --to) + while (eeti_ts_irq_active(priv) && --to) i2c_master_recv(priv->client, buf, sizeof(buf)); if (!to) { @@ -140,8 +146,10 @@ static void eeti_ts_close(struct input_dev *dev) static int __devinit eeti_ts_probe(struct i2c_client *client, const struct i2c_device_id *idp) { + struct eeti_ts_platform_data *pdata; struct eeti_ts_priv *priv; struct input_dev *input; + unsigned int irq_flags; int err = -ENOMEM; /* In contrast to what's described in the datasheet, there seems @@ -180,6 +188,14 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, priv->input = input; priv->irq = client->irq; + pdata = client->dev.platform_data; + + if (pdata) + priv->irq_active_high = pdata->irq_active_high; + + irq_flags = priv->irq_active_high ? + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; + INIT_WORK(&priv->work, eeti_ts_read); i2c_set_clientdata(client, priv); input_set_drvdata(input, priv); @@ -188,7 +204,7 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, if (err) goto err1; - err = request_irq(priv->irq, eeti_ts_isr, IRQF_TRIGGER_FALLING, + err = request_irq(priv->irq, eeti_ts_isr, irq_flags, client->name, priv); if (err) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h new file mode 100644 index 0000000..f875b31 --- /dev/null +++ b/include/linux/input/eeti_ts.h @@ -0,0 +1,9 @@ +#ifndef LINUX_INPUT_EETI_TS_H +#define LINUX_INPUT_EETI_TS_H + +struct eeti_ts_platform_data { + unsigned int irq_active_high; +}; + +#endif /* LINUX_INPUT_EETI_TS_H */ + -- cgit v0.10.2 From 3b72094409ab673d096b3852f4636be540780faf Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 18 Aug 2009 11:45:02 -0700 Subject: Input: psmouse - allow defining read-only attributes Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 54ed267..e3562da 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -116,9 +116,7 @@ ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *at ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); -#define __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, _protect) \ -static ssize_t _show(struct psmouse *, void *data, char *); \ -static ssize_t _set(struct psmouse *, void *data, const char *, size_t); \ +#define __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, _set, _protect) \ static struct psmouse_attribute psmouse_attr_##_name = { \ .dattr = { \ .attr = { \ @@ -134,7 +132,20 @@ static struct psmouse_attribute psmouse_attr_##_name = { \ .protect = _protect, \ } -#define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set) \ - __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, 1) +#define __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, _protect) \ + static ssize_t _show(struct psmouse *, void *, char *); \ + static ssize_t _set(struct psmouse *, void *, const char *, size_t); \ + __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, _set, _protect) + +#define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set) \ + __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, 1) + +#define PSMOUSE_DEFINE_RO_ATTR(_name, _mode, _data, _show) \ + static ssize_t _show(struct psmouse *, void *, char *); \ + __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, NULL, 1) + +#define PSMOUSE_DEFINE_WO_ATTR(_name, _mode, _data, _set) \ + static ssize_t _set(struct psmouse *, void *, const char *, size_t); \ + __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, 1) #endif /* _PSMOUSE_H */ -- cgit v0.10.2 From fc69f4a6af49ee69475dc4217924d9edf77760e0 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Sun, 10 May 2009 18:15:39 -0700 Subject: Input: add new driver for Sentelic Finger Sensing Pad This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt new file mode 100644 index 0000000..f7160a2 --- /dev/null +++ b/Documentation/input/sentelic.txt @@ -0,0 +1,475 @@ +Copyright (C) 2002-2008 Sentelic Corporation. +Last update: Oct-31-2008 + +============================================================================== +* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) +============================================================================== +A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward + page (5th button) +@1. Set sample rate to 200; +@2. Set sample rate to 200; +@3. Set sample rate to 80; +@4. Issuing the "Get device ID" command (0xF2) and waits for the response; +@5. FSP will respond 0x04. + +Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X Movement(9-bit 2's complement integers) +Byte 3: Y Movement(9-bit 2's complement integers) +Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. + valid values, -8 ~ +7 + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +B) MSID 6: Horizontal and Vertical scrolling. +@ Set bit 1 in register 0x40 to 1 + +# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and + vertical scrolling. + +Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|l|r|u|d| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X Movement(9-bit 2's complement integers) +Byte 3: Y Movement(9-bit 2's complement integers) +Byte 4: Bit0 => the Vertical scrolling movement downward. + Bit1 => the Vertical scrolling movement upward. + Bit2 => the Vertical scrolling movement rightward. + Bit3 => the Vertical scrolling movement leftward. + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +C) MSID 7: +# FSP uses 2 packets(8 Bytes) data to represent Absolute Position + so we have PACKET NUMBER to identify packets. + If PACKET NUMBER is 0, the packet is Packet 1. + If PACKET NUMBER is 1, the packet is Packet 2. + Please count this number in program. + +# MSID6 special packet will be enable at the same time when enable MSID 7. + +============================================================================== +* Absolute position for STL3886-G0. +============================================================================== +@ Set bit 2 or 3 in register 0x40 to 1 +@ Set bit 6 in register 0x40 to 1 + +Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => valid bit + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll up + Bit5 => scroll down + Bit6 => scroll left + Bit7 => scroll right + +Notify Packet for G0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 0 + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: Message Type => 0x5A (Enable/Disable status packet) + Mode Type => 0xA5 (Normal/Icon mode status) +Byte 3: Message Type => 0x00 (Disabled) + => 0x01 (Enabled) + Mode Type => 0x00 (Normal) + => 0x01 (Icon) +Byte 4: Bit7~Bit0 => Don't Care + +============================================================================== +* Absolute position for STL3888-A0. +============================================================================== +Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Left Button, 1 is pressed, 0 is released. + Bit1 => 0 + Bit0 => 1 +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y1_g + Bit7~Bit6 => x1_g + +Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Right Button, 1 is pressed, 0 is released. + Bit1 => 1 + Bit0 => 0 +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y2_g + Bit7~Bit6 => x2_g + +Notify Packet for STL3888-A0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) +Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode +Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll down button + Bit4 => scroll up button + * Note that if gesture and additional button (Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved + +Sample sequence of Multi-finger, Multi-coordinate mode: + + notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, + abs pkt 2, ..., notify packet(valid bit == 0) + +============================================================================== +* FSP Enable/Disable packet +============================================================================== + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | + |---------------| |---------------| |---------------| |---------------| + +FSP will send out enable/disable packet when FSP receive PS/2 enable/disable +command. Host will receive the packet which Middle, Right, Left button will +be set. The packet only use byte 0 and byte 1 as a pattern of original packet. +Ignore the other bytes of the packet. + +Byte 1: Bit7 => 0, Y overflow + Bit6 => 0, X overflow + Bit5 => 0, Y sign bit + Bit4 => 0, X sign bit + Bit3 => 1 + Bit2 => 1, Middle Button + Bit1 => 1, Right Button + Bit0 => 1, Left Button +Byte 2: Bit7~1 => (0101101b) + Bit0 => 1 = Enable + 0 = Disable +Byte 3: Don't care +Byte 4: Don't care (MOUSE ID 3, 4) +Byte 5~8: Don't care (Absolute packet) + +============================================================================== +* PS/2 Command Set +============================================================================== + +FSP supports basic PS/2 commanding set and modes, refer to following URL for +details about PS/2 commands: + +http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface + +============================================================================== +* Programming Sequence for Determining Packet Parsing Flow +============================================================================== +1. Identify FSP by reading device ID(0x00) and version(0x01) register + +2. Determine number of buttons by reading status2 (0x0b) register + + buttons = reg[0x0b] & 0x30 + + if buttons == 0x30 or buttons == 0x20: + # two/four buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail(ignore byte 4, bit ~ 7) + elif buttons == 0x10: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section B for packet parsing detail + elif buttons == 0x00: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail + +============================================================================== +* Programming Sequence for Register Reading/Writing +============================================================================== + +Register inversion requirement: + + Following values needed to be inverted(the '~' operator in C) before being +sent to FSP: + + 0xe9, 0xee, 0xf2 and 0xff. + +Register swapping requirement: + + Following values needed to have their higher 4 bits and lower 4 bits being +swapped before being sent to FSP: + + 10, 20, 40, 60, 80, 100 and 200. + +Register reading sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x66 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. if the register address being to read is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 6 + + 5a. send 0x68 PS/2 command to FSP; + + 5b. send the inverted register address to FSP and goto step 8; + + 6. if the register address being to read is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 7 + + 6a. send 0xcc PS/2 command to FSP; + + 6b. send the swapped register address to FSP and goto step 8; + + 7. send 0x66 PS/2 command to FSP; + + 7a. send the original register address to FSP and goto step 8; + + 8. send 0xe9(status request) PS/2 command to FSP; + + 9. the response read from FSP should be the requested register value. + +Register writing sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. if the register address being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 3 + + 2a. send 0x74 PS/2 command to FSP; + + 2b. send the inverted register address to FSP and goto step 5; + + 3. if the register address being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 4 + + 3a. send 0x77 PS/2 command to FSP; + + 3b. send the swapped register address to FSP and goto step 5; + + 4. send 0x55 PS/2 command to FSP; + + 4a. send the register address to FSP and goto step 5; + + 5. send 0xf3 PS/2 command to FSP; + + 6. if the register value being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 7 + + 6a. send 0x47 PS/2 command to FSP; + + 6b. send the inverted register value to FSP and goto step 9; + + 7. if the register value being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 8 + + 7a. send 0x44 PS/2 command to FSP; + + 7b. send the swapped register value to FSP and goto step 9; + + 8. send 0x33 PS/2 command to FSP; + + 8a. send the register value to FSP; + + 9. the register writing sequence is completed. + +============================================================================== +* Register Listing +============================================================================== + +offset width default r/w name +0x00 bit7~bit0 0x01 RO device ID + +0x01 bit7~bit0 0xc0 RW version ID + +0x02 bit7~bit0 0x01 RO vendor ID + +0x03 bit7~bit0 0x01 RO product ID + +0x04 bit3~bit0 0x01 RW revision ID + +0x0b RO test mode status 1 + bit3 1 RO 0: rotate 180 degree, 1: no rotation + + bit5~bit4 RO number of buttons + 11 => 2, lbtn/rbtn + 10 => 4, lbtn/rbtn/scru/scrd + 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr + 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn + +0x0f RW register file page control + bit0 0 RW 1 to enable page 1 register files + +0x10 RW system control 1 + bit0 1 RW Reserved, must be 1 + bit1 0 RW Reserved, must be 0 + bit4 1 RW Reserved, must be 0 + bit5 0 RW register clock gating enable + 0: read only, 1: read/write enable + (Note that following registers does not require clock gating being + enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e + 40 41 42 43.) + +0x31 RW on-pad command detection + bit7 0 RW on-pad command left button down tag + enable + 0: disable, 1: enable + +0x34 RW on-pad command control 5 + bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + + bit7 0 RW on-pad tap zone enable + 0: disable, 1: enable + +0x35 RW on-pad command control 6 + bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 + (Note that position unit is in 0.5 scanline) + +0x36 RW on-pad command control 7 + bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + +0x37 RW on-pad command control 8 + bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 + (Note that position unit is in 0.5 scanline) + +0x40 RW system control 5 + bit1 0 RW FSP Intellimouse mode enable + 0: disable, 1: enable + + bit2 0 RW movement + abs. coordinate mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1 and bit 2 are set at the same time, bit 2 will + override bit 1.) + + bit3 0 RW abs. coordinate only mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1, bit 2 and bit 3 are set at the same time, + bit 3 will override bit 1 and 2.) + + bit5 0 RW auto switch enable + 0: disable, 1: enable + + bit6 0 RW G0 abs. + notify packet format enable + 0: disable, 1: enable + (Note that the absolute/relative coordinate output still depends on + bit 2 and 3. That is, if any of those bit is 1, host will receive + absolute coordinates; otherwise, host only receives packets with + relative coordinate.) + +0x43 RW on-pad control + bit0 0 RW on-pad control enable + 0: disable, 1: enable + (Note that if this bit is cleared, bit 3/5 will be ineffective) + + bit3 0 RW on-pad fix vertical scrolling enable + 0: disable, 1: enable + + bit5 0 RW on-pad fix horizontal scrolling enable + 0: disable, 1: enable diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 90bef5d..3feeb3a 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -107,6 +107,14 @@ config MOUSE_PS2_ELANTECH entries. For further information, see . +config MOUSE_PS2_SENTELIC + bool "Sentelic Finger Sensing Pad PS/2 protocol extension" + depends on MOUSE_PS2 + help + Say Y here if you have a laptop (such as MSI WIND Netbook) + with Sentelic Finger Sensing Pad touchpad. + + If unsure, say N. config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index ea58c9a..570c84a4 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -27,5 +27,6 @@ psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o +psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index b407b35..df31888 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -30,6 +30,7 @@ #include "trackpoint.h" #include "touchkit_ps2.h" #include "elantech.h" +#include "sentelic.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -666,6 +667,20 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } +/* + * Try Finger Sensing Pad + */ + if (max_proto > PSMOUSE_IMEX) { + if (fsp_detect(psmouse, set_properties) == 0) { + if (!set_properties || fsp_init(psmouse) == 0) + return PSMOUSE_FSP; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + } + if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) return PSMOUSE_GENPS; @@ -813,7 +828,16 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = elantech_detect, .init = elantech_init, }, - #endif +#endif +#ifdef CONFIG_MOUSE_PS2_SENTELIC + { + .type = PSMOUSE_FSP, + .name = "FSPPS/2", + .alias = "fsp", + .detect = fsp_detect, + .init = fsp_init, + }, +#endif { .type = PSMOUSE_CORTRON, .name = "CortronPS/2", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index e3562da..cca1744 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -91,6 +91,7 @@ enum psmouse_type { PSMOUSE_CORTRON, PSMOUSE_HGPK, PSMOUSE_ELANTECH, + PSMOUSE_FSP, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c new file mode 100644 index 0000000..97b1e72 --- /dev/null +++ b/drivers/input/mouse/sentelic.c @@ -0,0 +1,867 @@ +/*- + * Finger Sensing Pad PS/2 mouse driver. + * + * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. + * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "psmouse.h" +#include "sentelic.h" + +/* + * Timeout for FSP PS/2 command only (in milliseconds). + */ +#define FSP_CMD_TIMEOUT 200 +#define FSP_CMD_TIMEOUT2 30 + +/** Driver version. */ +static const char fsp_drv_ver[] = "1.0.0-K"; + +/* + * Make sure that the value being sent to FSP will not conflict with + * possible sample rate values. + */ +static unsigned char fsp_test_swap_cmd(unsigned char reg_val) +{ + switch (reg_val) { + case 10: case 20: case 40: case 60: case 80: case 100: case 200: + /* + * The requested value being sent to FSP matched to possible + * sample rates, swap the given value such that the hardware + * wouldn't get confused. + */ + return (reg_val >> 4) | (reg_val << 4); + default: + return reg_val; /* swap isn't necessary */ + } +} + +/* + * Make sure that the value being sent to FSP will not conflict with certain + * commands. + */ +static unsigned char fsp_test_invert_cmd(unsigned char reg_val) +{ + switch (reg_val) { + case 0xe9: case 0xee: case 0xf2: case 0xff: + /* + * The requested value being sent to FSP matched to certain + * commands, inverse the given value such that the hardware + * wouldn't get confused. + */ + return ~reg_val; + default: + return reg_val; /* inversion isn't necessary */ + } +} + +static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + unsigned char addr; + int rc = -1; + + /* + * We need to shut off the device and switch it into command + * mode so we don't confuse our protocol handler. We don't need + * to do that for writes because sysfs set helper does this for + * us. + */ + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + /* should return 0xfe(request for resending) */ + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + /* should return 0xfc(failed) */ + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + if ((addr = fsp_test_invert_cmd(reg_addr)) != reg_addr) { + ps2_sendbyte(ps2dev, 0x68, FSP_CMD_TIMEOUT2); + } else if ((addr = fsp_test_swap_cmd(reg_addr)) != reg_addr) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0xcc, FSP_CMD_TIMEOUT2); + /* expect 0xfe */ + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + /* expect 0xfe */ + } + /* should return 0xfc(failed) */ + ps2_sendbyte(ps2dev, addr, FSP_CMD_TIMEOUT); + + if (__ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) < 0) + goto out; + + *reg_val = param[2]; + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", + reg_addr, *reg_val, rc); + return rc; +} + +static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char v; + int rc = -1; + + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + if ((v = fsp_test_invert_cmd(reg_addr)) != reg_addr) { + /* inversion is required */ + ps2_sendbyte(ps2dev, 0x74, FSP_CMD_TIMEOUT2); + } else { + if ((v = fsp_test_swap_cmd(reg_addr)) != reg_addr) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x77, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x55, FSP_CMD_TIMEOUT2); + } + } + /* write the register address in correct order */ + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + return -1; + + if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { + /* inversion is required */ + ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); + } else if ((v = fsp_test_swap_cmd(reg_val)) != reg_val) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x44, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x33, FSP_CMD_TIMEOUT2); + } + + /* write the register value in correct order */ + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", + reg_addr, reg_val, rc); + return rc; +} + +/* Enable register clock gating for writing certain registers */ +static int fsp_reg_write_enable(struct psmouse *psmouse, bool enable) +{ + int v, nv; + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL1, &v) == -1) + return -1; + + if (enable) + nv = v | FSP_BIT_EN_REG_CLK; + else + nv = v & ~FSP_BIT_EN_REG_CLK; + + /* only write if necessary */ + if (nv != v) + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL1, nv) == -1) + return -1; + + return 0; +} + +static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + int rc = -1; + + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x66, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x83, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + /* get the returned result */ + if (__ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + goto out; + + *reg_val = param[2]; + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", + *reg_val, rc); + return rc; +} + +static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char v; + int rc = -1; + + mutex_lock(&ps2dev->cmd_mutex); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + goto out; + + ps2_sendbyte(ps2dev, 0x38, FSP_CMD_TIMEOUT2); + ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2); + + if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0) + return -1; + + if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) { + ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2); + } else if ((v = fsp_test_swap_cmd(reg_val)) != reg_val) { + /* swapping is required */ + ps2_sendbyte(ps2dev, 0x44, FSP_CMD_TIMEOUT2); + } else { + /* swapping isn't necessary */ + ps2_sendbyte(ps2dev, 0x33, FSP_CMD_TIMEOUT2); + } + + ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2); + rc = 0; + + out: + mutex_unlock(&ps2dev->cmd_mutex); + dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", + reg_val, rc); + return rc; +} + +static int fsp_get_version(struct psmouse *psmouse, int *version) +{ + if (fsp_reg_read(psmouse, FSP_REG_VERSION, version)) + return -EIO; + + return 0; +} + +static int fsp_get_revision(struct psmouse *psmouse, int *rev) +{ + if (fsp_reg_read(psmouse, FSP_REG_REVISION, rev)) + return -EIO; + + return 0; +} + +static int fsp_get_buttons(struct psmouse *psmouse, int *btn) +{ + static const int buttons[] = { + 0x16, /* Left/Middle/Right/Forward/Backward & Scroll Up/Down */ + 0x06, /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + 0x04, /* Left/Middle/Right & Scroll Up/Down */ + 0x02, /* Left/Middle/Right */ + }; + int val; + + if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1) + return -EIO; + + *btn = buttons[(val & 0x30) >> 4]; + return 0; +} + +/* Enable on-pad command tag output */ +static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) +{ + int v, nv; + int res = 0; + + if (fsp_reg_read(psmouse, FSP_REG_OPC_QDOWN, &v) == -1) { + dev_err(&psmouse->ps2dev.serio->dev, "Unable get OPC state.\n"); + return -EIO; + } + + if (enable) + nv = v | FSP_BIT_EN_OPC_TAG; + else + nv = v & ~FSP_BIT_EN_OPC_TAG; + + /* only write if necessary */ + if (nv != v) { + fsp_reg_write_enable(psmouse, true); + res = fsp_reg_write(psmouse, FSP_REG_OPC_QDOWN, nv); + fsp_reg_write_enable(psmouse, false); + } + + if (res != 0) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to enable OPC tag.\n"); + res = -EIO; + } + + return res; +} + +static int fsp_onpad_vscr(struct psmouse *psmouse, bool enable) +{ + struct fsp_data *pad = psmouse->private; + int val; + + if (fsp_reg_read(psmouse, FSP_REG_ONPAD_CTL, &val)) + return -EIO; + + pad->vscroll = enable; + + if (enable) + val |= (FSP_BIT_FIX_VSCR | FSP_BIT_ONPAD_ENABLE); + else + val &= ~FSP_BIT_FIX_VSCR; + + if (fsp_reg_write(psmouse, FSP_REG_ONPAD_CTL, val)) + return -EIO; + + return 0; +} + +static int fsp_onpad_hscr(struct psmouse *psmouse, bool enable) +{ + struct fsp_data *pad = psmouse->private; + int val, v2; + + if (fsp_reg_read(psmouse, FSP_REG_ONPAD_CTL, &val)) + return -EIO; + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &v2)) + return -EIO; + + pad->hscroll = enable; + + if (enable) { + val |= (FSP_BIT_FIX_HSCR | FSP_BIT_ONPAD_ENABLE); + v2 |= FSP_BIT_EN_MSID6; + } else { + val &= ~FSP_BIT_FIX_HSCR; + v2 &= ~(FSP_BIT_EN_MSID6 | FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8); + } + + if (fsp_reg_write(psmouse, FSP_REG_ONPAD_CTL, val)) + return -EIO; + + /* reconfigure horizontal scrolling packet output */ + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, v2)) + return -EIO; + + return 0; +} + +/* + * Write device specific initial parameters. + * + * ex: 0xab 0xcd - write oxcd into register 0xab + */ +static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long reg, val; + char *rest; + ssize_t retval; + + reg = simple_strtoul(buf, &rest, 16); + if (rest == buf || *rest != ' ' || reg > 0xff) + return -EINVAL; + + if (strict_strtoul(rest + 1, 16, &val) || val > 0xff) + return -EINVAL; + + if (fsp_reg_write_enable(psmouse, true)) + return -EIO; + + retval = fsp_reg_write(psmouse, reg, val) < 0 ? -EIO : count; + + fsp_reg_write_enable(psmouse, false); + + return count; +} + +PSMOUSE_DEFINE_WO_ATTR(setreg, S_IWUSR, NULL, fsp_attr_set_setreg); + +static ssize_t fsp_attr_show_getreg(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%02x%02x\n", pad->last_reg, pad->last_val); +} + +/* + * Read a register from device. + * + * ex: 0xab -- read content from register 0xab + */ +static ssize_t fsp_attr_set_getreg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + struct fsp_data *pad = psmouse->private; + unsigned long reg; + int val; + + if (strict_strtoul(buf, 16, ®) || reg > 0xff) + return -EINVAL; + + if (fsp_reg_read(psmouse, reg, &val)) + return -EIO; + + pad->last_reg = reg; + pad->last_val = val; + + return count; +} + +PSMOUSE_DEFINE_ATTR(getreg, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_getreg, fsp_attr_set_getreg); + +static ssize_t fsp_attr_show_pagereg(struct psmouse *psmouse, + void *data, char *buf) +{ + int val = 0; + + if (fsp_page_reg_read(psmouse, &val)) + return -EIO; + + return sprintf(buf, "%02x\n", val); +} + +static ssize_t fsp_attr_set_pagereg(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 16, &val) || val > 0xff) + return -EINVAL; + + if (fsp_page_reg_write(psmouse, val)) + return -EIO; + + return count; +} + +PSMOUSE_DEFINE_ATTR(page, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_pagereg, fsp_attr_set_pagereg); + +static ssize_t fsp_attr_show_vscroll(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%d\n", pad->vscroll); +} + +static ssize_t fsp_attr_set_vscroll(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 10, &val) || val > 1) + return -EINVAL; + + fsp_onpad_vscr(psmouse, val); + + return count; +} + +PSMOUSE_DEFINE_ATTR(vscroll, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_vscroll, fsp_attr_set_vscroll); + +static ssize_t fsp_attr_show_hscroll(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%d\n", pad->hscroll); +} + +static ssize_t fsp_attr_set_hscroll(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + unsigned long val; + + if (strict_strtoul(buf, 10, &val) || val > 1) + return -EINVAL; + + fsp_onpad_hscr(psmouse, val); + + return count; +} + +PSMOUSE_DEFINE_ATTR(hscroll, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_hscroll, fsp_attr_set_hscroll); + +static ssize_t fsp_attr_show_flags(struct psmouse *psmouse, + void *data, char *buf) +{ + struct fsp_data *pad = psmouse->private; + + return sprintf(buf, "%c\n", + pad->flags & FSPDRV_FLAG_EN_OPC ? 'C' : 'c'); +} + +static ssize_t fsp_attr_set_flags(struct psmouse *psmouse, void *data, + const char *buf, size_t count) +{ + struct fsp_data *pad = psmouse->private; + size_t i; + + for (i = 0; i < count; i++) { + switch (buf[i]) { + case 'C': + pad->flags |= FSPDRV_FLAG_EN_OPC; + break; + case 'c': + pad->flags &= ~FSPDRV_FLAG_EN_OPC; + break; + default: + return -EINVAL; + } + } + return count; +} + +PSMOUSE_DEFINE_ATTR(flags, S_IWUSR | S_IRUGO, NULL, + fsp_attr_show_flags, fsp_attr_set_flags); + +static ssize_t fsp_attr_show_ver(struct psmouse *psmouse, + void *data, char *buf) +{ + return sprintf(buf, "Sentelic FSP kernel module %s\n", fsp_drv_ver); +} + +PSMOUSE_DEFINE_RO_ATTR(ver, S_IRUGO, NULL, fsp_attr_show_ver); + +static struct attribute *fsp_attributes[] = { + &psmouse_attr_setreg.dattr.attr, + &psmouse_attr_getreg.dattr.attr, + &psmouse_attr_page.dattr.attr, + &psmouse_attr_vscroll.dattr.attr, + &psmouse_attr_hscroll.dattr.attr, + &psmouse_attr_flags.dattr.attr, + &psmouse_attr_ver.dattr.attr, + NULL +}; + +static struct attribute_group fsp_attribute_group = { + .attrs = fsp_attributes, +}; + +#ifdef FSP_DEBUG +static void fsp_packet_debug(unsigned char packet[]) +{ + static unsigned int ps2_packet_cnt; + static unsigned int ps2_last_second; + unsigned int jiffies_msec; + + ps2_packet_cnt++; + jiffies_msec = jiffies_to_msecs(jiffies); + printk(KERN_DEBUG "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", + jiffies_msec, packet[0], packet[1], packet[2], packet[3]); + + if (jiffies_msec - ps2_last_second > 1000) { + printk(KERN_DEBUG "PS/2 packets/sec = %d\n", ps2_packet_cnt); + ps2_packet_cnt = 0; + ps2_last_second = jiffies_msec; + } +} +#else +static void fsp_packet_debug(unsigned char packet[]) +{ +} +#endif + +static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct fsp_data *ad = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char button_status = 0, lscroll = 0, rscroll = 0; + int rel_x, rel_y; + + if (psmouse->pktcnt < 4) + return PSMOUSE_GOOD_DATA; + + /* + * Full packet accumulated, process it + */ + + switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { + case FSP_PKT_TYPE_ABS: + dev_warn(&psmouse->ps2dev.serio->dev, + "Unexpected absolute mode packet, ignored.\n"); + break; + + case FSP_PKT_TYPE_NORMAL_OPC: + /* on-pad click, filter it if necessary */ + if ((ad->flags & FSPDRV_FLAG_EN_OPC) != FSPDRV_FLAG_EN_OPC) + packet[0] &= ~BIT(0); + /* fall through */ + + case FSP_PKT_TYPE_NORMAL: + /* normal packet */ + /* special packet data translation from on-pad packets */ + if (packet[3] != 0) { + if (packet[3] & BIT(0)) + button_status |= 0x01; /* wheel down */ + if (packet[3] & BIT(1)) + button_status |= 0x0f; /* wheel up */ + if (packet[3] & BIT(2)) + button_status |= BIT(5);/* horizontal left */ + if (packet[3] & BIT(3)) + button_status |= BIT(4);/* horizontal right */ + /* push back to packet queue */ + if (button_status != 0) + packet[3] = button_status; + rscroll = (packet[3] >> 4) & 1; + lscroll = (packet[3] >> 5) & 1; + } + /* + * Processing wheel up/down and extra button events + */ + input_report_rel(dev, REL_WHEEL, + (int)(packet[3] & 8) - (int)(packet[3] & 7)); + input_report_rel(dev, REL_HWHEEL, lscroll - rscroll); + input_report_key(dev, BTN_BACK, lscroll); + input_report_key(dev, BTN_FORWARD, rscroll); + + /* + * Standard PS/2 Mouse + */ + input_report_key(dev, BTN_LEFT, packet[0] & 1); + input_report_key(dev, BTN_MIDDLE, (packet[0] >> 2) & 1); + input_report_key(dev, BTN_RIGHT, (packet[0] >> 1) & 1); + + rel_x = packet[1] ? (int)packet[1] - (int)((packet[0] << 4) & 0x100) : 0; + rel_y = packet[2] ? (int)((packet[0] << 3) & 0x100) - (int)packet[2] : 0; + + input_report_rel(dev, REL_X, rel_x); + input_report_rel(dev, REL_Y, rel_y); + break; + } + + input_sync(dev); + + fsp_packet_debug(packet); + + return PSMOUSE_FULL_PACKET; +} + +static int fsp_activate_protocol(struct psmouse *psmouse) +{ + struct fsp_data *pad = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[2]; + int val; + + /* + * Standard procedure to enter FSP Intellimouse mode + * (scrolling wheel, 4th and 5th buttons) + */ + param[0] = 200; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + param[0] = 200; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + param[0] = 80; + ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + + ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); + if (param[0] != 0x04) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to enable 4 bytes packet format.\n"); + return -EIO; + } + + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to read SYSCTL5 register.\n"); + return -EIO; + } + + val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); + /* Ensure we are not in absolute mode */ + val &= ~FSP_BIT_EN_PKT_G0; + if (pad->buttons == 0x06) { + /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + val |= FSP_BIT_EN_MSID6; + } + + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { + dev_err(&psmouse->ps2dev.serio->dev, + "Unable to set up required mode bits.\n"); + return -EIO; + } + + /* + * Enable OPC tags such that driver can tell the difference between + * on-pad and real button click + */ + if (fsp_opc_tag_enable(psmouse, true)) + dev_warn(&psmouse->ps2dev.serio->dev, + "Failed to enable OPC tag mode.\n"); + + /* Enable on-pad vertical and horizontal scrolling */ + fsp_onpad_vscr(psmouse, true); + fsp_onpad_hscr(psmouse, true); + + return 0; +} + +int fsp_detect(struct psmouse *psmouse, int set_properties) +{ + int id; + + if (fsp_reg_read(psmouse, FSP_REG_DEVICE_ID, &id)) + return -EIO; + + if (id != 0x01) + return -ENODEV; + + if (set_properties) { + psmouse->vendor = "Sentelic"; + psmouse->name = "FingerSensingPad"; + } + + return 0; +} + +static void fsp_reset(struct psmouse *psmouse) +{ + fsp_opc_tag_enable(psmouse, false); + fsp_onpad_vscr(psmouse, false); + fsp_onpad_hscr(psmouse, false); +} + +static void fsp_disconnect(struct psmouse *psmouse) +{ + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &fsp_attribute_group); + + fsp_reset(psmouse); + kfree(psmouse->private); +} + +static int fsp_reconnect(struct psmouse *psmouse) +{ + int version; + + if (fsp_detect(psmouse, 0)) + return -ENODEV; + + if (fsp_get_version(psmouse, &version)) + return -ENODEV; + + if (fsp_activate_protocol(psmouse)) + return -EIO; + + return 0; +} + +int fsp_init(struct psmouse *psmouse) +{ + struct fsp_data *priv; + int ver, rev, buttons; + int error; + + if (fsp_get_version(psmouse, &ver) || + fsp_get_revision(psmouse, &rev) || + fsp_get_buttons(psmouse, &buttons)) { + return -ENODEV; + } + + printk(KERN_INFO + "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", + ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); + + psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ver = ver; + priv->rev = rev; + priv->buttons = buttons; + + /* enable on-pad click by default */ + priv->flags |= FSPDRV_FLAG_EN_OPC; + + /* Set up various supported input event bits */ + __set_bit(BTN_BACK, psmouse->dev->keybit); + __set_bit(BTN_FORWARD, psmouse->dev->keybit); + __set_bit(REL_WHEEL, psmouse->dev->relbit); + __set_bit(REL_HWHEEL, psmouse->dev->relbit); + + psmouse->protocol_handler = fsp_process_byte; + psmouse->disconnect = fsp_disconnect; + psmouse->reconnect = fsp_reconnect; + psmouse->cleanup = fsp_reset; + psmouse->pktsize = 4; + + /* set default packet output based on number of buttons we found */ + error = fsp_activate_protocol(psmouse); + if (error) + goto err_out; + + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, + &fsp_attribute_group); + if (error) { + dev_err(&psmouse->ps2dev.serio->dev, + "Failed to create sysfs attributes (%d)", error); + goto err_out; + } + + return 0; + + err_out: + kfree(psmouse->private); + psmouse->private = NULL; + return error; +} diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h new file mode 100644 index 0000000..083559c --- /dev/null +++ b/drivers/input/mouse/sentelic.h @@ -0,0 +1,98 @@ +/*- + * Finger Sensing Pad PS/2 mouse driver. + * + * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. + * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __SENTELIC_H +#define __SENTELIC_H + +/* Finger-sensing Pad information registers */ +#define FSP_REG_DEVICE_ID 0x00 +#define FSP_REG_VERSION 0x01 +#define FSP_REG_REVISION 0x04 +#define FSP_REG_TMOD_STATUS1 0x0B +#define FSP_BIT_NO_ROTATION BIT(3) +#define FSP_REG_PAGE_CTRL 0x0F + +/* Finger-sensing Pad control registers */ +#define FSP_REG_SYSCTL1 0x10 +#define FSP_BIT_EN_REG_CLK BIT(5) +#define FSP_REG_OPC_QDOWN 0x31 +#define FSP_BIT_EN_OPC_TAG BIT(7) +#define FSP_REG_OPTZ_XLO 0x34 +#define FSP_REG_OPTZ_XHI 0x35 +#define FSP_REG_OPTZ_YLO 0x36 +#define FSP_REG_OPTZ_YHI 0x37 +#define FSP_REG_SYSCTL5 0x40 +#define FSP_BIT_90_DEGREE BIT(0) +#define FSP_BIT_EN_MSID6 BIT(1) +#define FSP_BIT_EN_MSID7 BIT(2) +#define FSP_BIT_EN_MSID8 BIT(3) +#define FSP_BIT_EN_AUTO_MSID8 BIT(5) +#define FSP_BIT_EN_PKT_G0 BIT(6) + +#define FSP_REG_ONPAD_CTL 0x43 +#define FSP_BIT_ONPAD_ENABLE BIT(0) +#define FSP_BIT_ONPAD_FBBB BIT(1) +#define FSP_BIT_FIX_VSCR BIT(3) +#define FSP_BIT_FIX_HSCR BIT(5) +#define FSP_BIT_DRAG_LOCK BIT(6) + +/* Finger-sensing Pad packet formating related definitions */ + +/* absolute packet type */ +#define FSP_PKT_TYPE_NORMAL (0x00) +#define FSP_PKT_TYPE_ABS (0x01) +#define FSP_PKT_TYPE_NOTIFY (0x02) +#define FSP_PKT_TYPE_NORMAL_OPC (0x03) +#define FSP_PKT_TYPE_SHIFT (6) + +#ifdef __KERNEL__ + +struct fsp_data { + unsigned char ver; /* hardware version */ + unsigned char rev; /* hardware revison */ + unsigned char buttons; /* Number of buttons */ + unsigned int flags; +#define FSPDRV_FLAG_EN_OPC (0x001) /* enable on-pad clicking */ + + bool vscroll; /* Vertical scroll zone enabled */ + bool hscroll; /* Horizontal scroll zone enabled */ + + unsigned char last_reg; /* Last register we requested read from */ + unsigned char last_val; +}; + +#ifdef CONFIG_MOUSE_PS2_SENTELIC +extern int fsp_detect(struct psmouse *psmouse, int set_properties); +extern int fsp_init(struct psmouse *psmouse); +#else +inline int fsp_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +inline int fsp_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif + +#endif /* __KERNEL__ */ + +#endif /* !__SENTELIC_H */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index be5bbbb..3a95b50 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -161,7 +161,7 @@ static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout) * ps2_command() can only be called from a process context */ -int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) +int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) { int timeout; int send = (command >> 12) & 0xf; @@ -179,8 +179,6 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) return -1; } - mutex_lock(&ps2dev->cmd_mutex); - serio_pause_rx(ps2dev->serio); ps2dev->flags = command == PS2_CMD_GETID ? PS2_FLAG_WAITID : 0; ps2dev->cmdcnt = receive; @@ -231,7 +229,18 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) ps2dev->flags = 0; serio_continue_rx(ps2dev->serio); + return rc; +} +EXPORT_SYMBOL(__ps2_command); + +int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) +{ + int rc; + + mutex_lock(&ps2dev->cmd_mutex); + rc = __ps2_command(ps2dev, param, command); mutex_unlock(&ps2dev->cmd_mutex); + return rc; } EXPORT_SYMBOL(ps2_command); diff --git a/include/linux/libps2.h b/include/linux/libps2.h index b94534b..fcf5fbe 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -44,6 +44,7 @@ struct ps2dev { void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); +int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data); -- cgit v0.10.2 From fb962e1e1772df163358832476e6091d1660ba9f Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Thu, 20 Aug 2009 21:41:03 -0700 Subject: Input: w90p910_keypad - rename driver name to match platform Signed-off-by: Wan ZongShun Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 24096cd..b8598ae 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -267,7 +267,7 @@ static struct platform_driver w90p910_keypad_driver = { .probe = w90p910_keypad_probe, .remove = __devexit_p(w90p910_keypad_remove), .driver = { - .name = "w90p910-keypad", + .name = "nuc900-keypad", .owner = THIS_MODULE, }, }; @@ -286,6 +286,6 @@ module_init(w90p910_keypad_init); module_exit(w90p910_keypad_exit); MODULE_AUTHOR("Wan ZongShun "); -MODULE_DESCRIPTION("w90p910 keypad driver!"); +MODULE_DESCRIPTION("w90p910 keypad driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:w90p910-keypad"); +MODULE_ALIAS("platform:nuc900-keypad"); -- cgit v0.10.2 From 805423e84e900e56c834aadee61a020b0d5092c3 Mon Sep 17 00:00:00 2001 From: Corbin Simpson Date: Thu, 20 Aug 2009 21:41:04 -0700 Subject: Input: xpad - add USB ID for the drumkit controller from Rock Band Signed-off-by: Corbin Simpson Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index f155ad8..2388cf5 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -144,6 +144,7 @@ static const struct xpad_device { { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, + { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN } }; @@ -208,6 +209,7 @@ static struct usb_device_id xpad_table [] = { XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */ { } }; -- cgit v0.10.2 From 999b874f4aa39b7abf45662ff0900f943ddb2d02 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 25 Aug 2009 19:24:22 -0700 Subject: Input: joydev - validate axis/button maps before clobbering current ones Up to now axis and button map validation was done after the user-supplied values were copied over the driver's map. This patch copies the user-supplied values into temporary buffers and validated them before overwriting the driver's permanent maps. Also change JSIOCGBTNMAP and JSIOCGAXMAP to return number of bytes returned to userspace instead of 0. Signed-off-by: Stephen Kitt Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 9a1d55b..901b252 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -452,6 +452,76 @@ static unsigned int joydev_poll(struct file *file, poll_table *wait) (joydev->exist ? 0 : (POLLHUP | POLLERR)); } +static int joydev_handle_JSIOCSAXMAP(struct joydev *joydev, + void __user *argp, size_t len) +{ + __u8 *abspam; + int i; + int retval = 0; + + len = min(len, sizeof(joydev->abspam)); + + /* Validate the map. */ + abspam = kmalloc(len, GFP_KERNEL); + if (!abspam) + return -ENOMEM; + + if (copy_from_user(abspam, argp, len)) { + retval = -EFAULT; + goto out; + } + + for (i = 0; i < joydev->nabs; i++) { + if (abspam[i] > ABS_MAX) { + retval = -EINVAL; + goto out; + } + } + + memcpy(joydev->abspam, abspam, len); + + out: + kfree(abspam); + return retval; +} + +static int joydev_handle_JSIOCSBTNMAP(struct joydev *joydev, + void __user *argp, size_t len) +{ + __u16 *keypam; + int i; + int retval = 0; + + len = min(len, sizeof(joydev->keypam)); + + /* Validate the map. */ + keypam = kmalloc(len, GFP_KERNEL); + if (!keypam) + return -ENOMEM; + + if (copy_from_user(keypam, argp, len)) { + retval = -EFAULT; + goto out; + } + + for (i = 0; i < joydev->nkey; i++) { + if (keypam[i] > KEY_MAX || keypam[i] < BTN_MISC) { + retval = -EINVAL; + goto out; + } + } + + memcpy(joydev->keypam, keypam, len); + + for (i = 0; i < joydev->nkey; i++) + joydev->keymap[keypam[i] - BTN_MISC] = i; + + out: + kfree(keypam); + return retval; +} + + static int joydev_ioctl_common(struct joydev *joydev, unsigned int cmd, void __user *argp) { @@ -512,46 +582,18 @@ static int joydev_ioctl_common(struct joydev *joydev, switch (cmd & ~IOCSIZE_MASK) { case (JSIOCSAXMAP & ~IOCSIZE_MASK): - len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); - /* - * FIXME: we should not copy into our axis map before - * validating the data. - */ - if (copy_from_user(joydev->abspam, argp, len)) - return -EFAULT; - - for (i = 0; i < joydev->nabs; i++) { - if (joydev->abspam[i] > ABS_MAX) - return -EINVAL; - joydev->absmap[joydev->abspam[i]] = i; - } - return 0; + return joydev_handle_JSIOCSAXMAP(joydev, argp, _IOC_SIZE(cmd)); case (JSIOCGAXMAP & ~IOCSIZE_MASK): len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); - return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0; + return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : len; case (JSIOCSBTNMAP & ~IOCSIZE_MASK): - len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); - /* - * FIXME: we should not copy into our keymap before - * validating the data. - */ - if (copy_from_user(joydev->keypam, argp, len)) - return -EFAULT; - - for (i = 0; i < joydev->nkey; i++) { - if (joydev->keypam[i] > KEY_MAX || - joydev->keypam[i] < BTN_MISC) - return -EINVAL; - joydev->keymap[joydev->keypam[i] - BTN_MISC] = i; - } - - return 0; + return joydev_handle_JSIOCSBTNMAP(joydev, argp, _IOC_SIZE(cmd)); case (JSIOCGBTNMAP & ~IOCSIZE_MASK): len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); - return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0; + return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : len; case JSIOCGNAME(0): name = dev->name; -- cgit v0.10.2 From 8fbac18e8edd974b5234d96a9b8e2a26ab2ac556 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 25 Aug 2009 19:24:23 -0700 Subject: Input: tosakbd - fix cleaning up KEY_STROBEs after error Direct to fail2 to gpio_free() the KEY_STROBEs as well as the KEY_SENSEs. [dtor@mail.ru: change keymap from unsigned int to unsigned short] Signed-off-by: Roel Kluin Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c index 677276b..42cb3fa 100644 --- a/drivers/input/keyboard/tosakbd.c +++ b/drivers/input/keyboard/tosakbd.c @@ -31,7 +31,7 @@ #define KB_DISCHARGE_DELAY 10 #define KB_ACTIVATE_DELAY 10 -static unsigned int tosakbd_keycode[NR_SCANCODES] = { +static unsigned short tosakbd_keycode[NR_SCANCODES] = { 0, 0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, 0, 0, 0, 0, 0, 0, 0, 0, @@ -50,9 +50,9 @@ KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_ }; struct tosakbd { - unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)]; + unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)]; struct input_dev *input; - int suspended; + bool suspended; spinlock_t lock; /* protect kbd scanning */ struct timer_list timer; }; @@ -215,7 +215,7 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) unsigned long flags; spin_lock_irqsave(&tosakbd->lock, flags); - tosakbd->suspended = 1; + tosakbd->suspended = true; spin_unlock_irqrestore(&tosakbd->lock, flags); del_timer_sync(&tosakbd->timer); @@ -227,7 +227,7 @@ static int tosakbd_resume(struct platform_device *dev) { struct tosakbd *tosakbd = platform_get_drvdata(dev); - tosakbd->suspended = 0; + tosakbd->suspended = false; tosakbd_scankeyboard(dev); return 0; @@ -277,14 +277,14 @@ static int __devinit tosakbd_probe(struct platform_device *pdev) { input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); input_dev->keycode = tosakbd->keycode; - input_dev->keycodesize = sizeof(unsigned int); + input_dev->keycodesize = sizeof(tosakbd->keycode[0]); input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) __set_bit(tosakbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { @@ -344,7 +344,7 @@ static int __devinit tosakbd_probe(struct platform_device *pdev) { " direction for GPIO %d, error %d\n", gpio, error); gpio_free(gpio); - goto fail; + goto fail2; } } @@ -353,7 +353,7 @@ static int __devinit tosakbd_probe(struct platform_device *pdev) { if (error) { printk(KERN_ERR "tosakbd: Unable to register input device, " "error: %d\n", error); - goto fail; + goto fail2; } printk(KERN_INFO "input: Tosa Keyboard Registered\n"); -- cgit v0.10.2 From 77a53fd21870c726b670c0d8179294ac1ea33468 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 25 Aug 2009 19:24:13 -0700 Subject: Input: matrix-keypad - add function to build device keymap Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 541b981..91cfe51 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -319,7 +319,6 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev) struct input_dev *input_dev; unsigned short *keycodes; unsigned int row_shift; - int i; int err; pdata = pdev->dev.platform_data; @@ -363,18 +362,10 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev) input_dev->keycode = keycodes; input_dev->keycodesize = sizeof(*keycodes); - input_dev->keycodemax = pdata->num_row_gpios << keypad->row_shift; - - for (i = 0; i < keymap_data->keymap_size; i++) { - unsigned int key = keymap_data->keymap[i]; - unsigned int row = KEY_ROW(key); - unsigned int col = KEY_COL(key); - unsigned short code = KEY_VAL(key); + input_dev->keycodemax = pdata->num_row_gpios << row_shift; - keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code; - __set_bit(code, input_dev->keybit); - } - __clear_bit(KEY_RESERVED, input_dev->keybit); + matrix_keypad_build_keymap(keymap_data, row_shift, + input_dev->keycode, input_dev->keybit); input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_set_drvdata(input_dev, keypad); diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index b8598ae..2d03dd0 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -126,7 +126,6 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) struct resource *res; int irq; int error; - int i; if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); @@ -197,19 +196,8 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - for (i = 0; i < keymap_data->keymap_size; i++) { - unsigned int key = keymap_data->keymap[i]; - unsigned int row = KEY_ROW(key); - unsigned int col = KEY_COL(key); - unsigned short keycode = KEY_VAL(key); - unsigned int scancode = MATRIX_SCAN_CODE(row, col, - W90P910_ROW_SHIFT); - - keypad->keymap[scancode] = keycode; - __set_bit(keycode, input_dev->keybit); - } - __clear_bit(KEY_RESERVED, input_dev->keybit); - + matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT, + input_dev->keycode, input_dev->keybit); error = request_irq(keypad->irq, w90p910_keypad_irq_handler, IRQF_DISABLED, pdev->name, keypad); diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 15d5903..b3cd42d5 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -63,4 +63,36 @@ struct matrix_keypad_platform_data { bool wakeup; }; +/** + * matrix_keypad_build_keymap - convert platform keymap into matrix keymap + * @keymap_data: keymap supplied by the platform code + * @row_shift: number of bits to shift row value by to advance to the next + * line in the keymap + * @keymap: expanded version of keymap that is suitable for use by + * matrix keyboad driver + * @keybit: pointer to bitmap of keys supported by input device + * + * This function converts platform keymap (encoded with KEY() macro) into + * an array of keycodes that is suitable for using in a standard matrix + * keyboard driver that uses row and col as indices. + */ +static inline void +matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, + unsigned int row_shift, + unsigned short *keymap, unsigned long *keybit) +{ + int i; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code; + __set_bit(code, keybit); + } + __clear_bit(KEY_RESERVED, keybit); +} + #endif /* _MATRIX_KEYPAD_H */ -- cgit v0.10.2 From 9d8340687c524ce61e3c9c76758c4c81303acfc0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 25 Aug 2009 19:24:14 -0700 Subject: Input: add twl4030_keypad driver Add a driver for the keypad controller on TWL4030 family chips. These support up to an 8x8 key matrix. The TWL4030 multifunction chips are mostly used on OMAP3 (or OMAP 2430) based boards. [dtor@mail.ru: switch to matrix-keypad framework, fix changing keymap from userspace] Reviewed-by: Trilok Soni Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 50e407d..3525c19 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -330,6 +330,17 @@ config KEYBOARD_OMAP To compile this driver as a module, choose M here: the module will be called omap-keypad. +config KEYBOARD_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" + depends on TWL4030_CORE + help + Say Y here if your board use the keypad controller on + TWL4030 family chips. It's safe to say enable this + even on boards that don't use the keypad controller. + + To compile this driver as a module, choose M here: the + module will be called twl4030_keypad. + config KEYBOARD_TOSA tristate "Tosa keyboard" depends on MACH_TOSA diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 1523030..8a7a22b 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c new file mode 100644 index 0000000..9a2977c --- /dev/null +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -0,0 +1,480 @@ +/* + * twl4030_keypad.c - driver for 8x8 keypad controller in twl4030 chips + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Code re-written for 2430SDP by: + * Syed Mohammed Khasim + * + * Initial Code: + * Manjunatha G K + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + + +/* + * The TWL4030 family chips include a keypad controller that supports + * up to an 8x8 switch matrix. The controller can issue system wakeup + * events, since it uses only the always-on 32KiHz oscillator, and has + * an internal state machine that decodes pressed keys, including + * multi-key combinations. + * + * This driver lets boards define what keycodes they wish to report for + * which scancodes, as part of the "struct twl4030_keypad_data" used in + * the probe() routine. + * + * See the TPS65950 documentation; that's the general availability + * version of the TWL5030 second generation part. + */ +#define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */ +#define TWL4030_MAX_COLS 8 +#define TWL4030_ROW_SHIFT 3 +#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS) + +struct twl4030_keypad { + unsigned short keymap[TWL4030_KEYMAP_SIZE]; + u16 kp_state[TWL4030_MAX_ROWS]; + unsigned n_rows; + unsigned n_cols; + unsigned irq; + + struct device *dbg_dev; + struct input_dev *input; +}; + +/*----------------------------------------------------------------------*/ + +/* arbitrary prescaler value 0..7 */ +#define PTV_PRESCALER 4 + +/* Register Offsets */ +#define KEYP_CTRL 0x00 +#define KEYP_DEB 0x01 +#define KEYP_LONG_KEY 0x02 +#define KEYP_LK_PTV 0x03 +#define KEYP_TIMEOUT_L 0x04 +#define KEYP_TIMEOUT_H 0x05 +#define KEYP_KBC 0x06 +#define KEYP_KBR 0x07 +#define KEYP_SMS 0x08 +#define KEYP_FULL_CODE_7_0 0x09 /* row 0 column status */ +#define KEYP_FULL_CODE_15_8 0x0a /* ... row 1 ... */ +#define KEYP_FULL_CODE_23_16 0x0b +#define KEYP_FULL_CODE_31_24 0x0c +#define KEYP_FULL_CODE_39_32 0x0d +#define KEYP_FULL_CODE_47_40 0x0e +#define KEYP_FULL_CODE_55_48 0x0f +#define KEYP_FULL_CODE_63_56 0x10 +#define KEYP_ISR1 0x11 +#define KEYP_IMR1 0x12 +#define KEYP_ISR2 0x13 +#define KEYP_IMR2 0x14 +#define KEYP_SIR 0x15 +#define KEYP_EDR 0x16 /* edge triggers */ +#define KEYP_SIH_CTRL 0x17 + +/* KEYP_CTRL_REG Fields */ +#define KEYP_CTRL_SOFT_NRST BIT(0) +#define KEYP_CTRL_SOFTMODEN BIT(1) +#define KEYP_CTRL_LK_EN BIT(2) +#define KEYP_CTRL_TOE_EN BIT(3) +#define KEYP_CTRL_TOLE_EN BIT(4) +#define KEYP_CTRL_RP_EN BIT(5) +#define KEYP_CTRL_KBD_ON BIT(6) + +/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/ +#define KEYP_PERIOD_US(t, prescale) ((t) / (31 << (prescale + 1)) - 1) + +/* KEYP_LK_PTV_REG Fields */ +#define KEYP_LK_PTV_PTV_SHIFT 5 + +/* KEYP_{IMR,ISR,SIR} Fields */ +#define KEYP_IMR1_MIS BIT(3) +#define KEYP_IMR1_TO BIT(2) +#define KEYP_IMR1_LK BIT(1) +#define KEYP_IMR1_KP BIT(0) + +/* KEYP_EDR Fields */ +#define KEYP_EDR_KP_FALLING 0x01 +#define KEYP_EDR_KP_RISING 0x02 +#define KEYP_EDR_KP_BOTH 0x03 +#define KEYP_EDR_LK_FALLING 0x04 +#define KEYP_EDR_LK_RISING 0x08 +#define KEYP_EDR_TO_FALLING 0x10 +#define KEYP_EDR_TO_RISING 0x20 +#define KEYP_EDR_MIS_FALLING 0x40 +#define KEYP_EDR_MIS_RISING 0x80 + + +/*----------------------------------------------------------------------*/ + +static int twl4030_kpread(struct twl4030_keypad *kp, + u8 *data, u32 reg, u8 num_bytes) +{ + int ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes); + + if (ret < 0) + dev_warn(kp->dbg_dev, + "Couldn't read TWL4030: %X - ret %d[%x]\n", + reg, ret, ret); + + return ret; +} + +static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg) +{ + int ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg); + + if (ret < 0) + dev_warn(kp->dbg_dev, + "Could not write TWL4030: %X - ret %d[%x]\n", + reg, ret, ret); + + return ret; +} + +static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col) +{ + /* If all bits in a row are active for all coloumns then + * we have that row line connected to gnd. Mark this + * key on as if it was on matrix position n_cols (ie + * one higher than the size of the matrix). + */ + if (col == 0xFF) + return 1 << kp->n_cols; + else + return col & ((1 << kp->n_cols) - 1); +} + +static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state) +{ + u8 new_state[TWL4030_MAX_ROWS]; + int row; + int ret = twl4030_kpread(kp, new_state, + KEYP_FULL_CODE_7_0, kp->n_rows); + if (ret >= 0) + for (row = 0; row < kp->n_rows; row++) + state[row] = twl4030_col_xlate(kp, new_state[row]); + + return ret; +} + +static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) +{ + int i; + u16 check = 0; + + for (i = 0; i < kp->n_rows; i++) { + u16 col = key_state[i]; + + if ((col & check) && hweight16(col) > 1) + return 1; + + check |= col; + } + + return 0; +} + +static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) +{ + struct input_dev *input = kp->input; + u16 new_state[TWL4030_MAX_ROWS]; + int col, row; + + if (release_all) + memset(new_state, 0, sizeof(new_state)); + else { + /* check for any changes */ + int ret = twl4030_read_kp_matrix_state(kp, new_state); + + if (ret < 0) /* panic ... */ + return; + + if (twl4030_is_in_ghost_state(kp, new_state)) + return; + } + + /* check for changes and print those */ + for (row = 0; row < kp->n_rows; row++) { + int changed = new_state[row] ^ kp->kp_state[row]; + + if (!changed) + continue; + + for (col = 0; col < kp->n_cols; col++) { + int code; + + if (!(changed & (1 << col))) + continue; + + dev_dbg(kp->dbg_dev, "key [%d:%d] %s\n", row, col, + (new_state[row] & (1 << col)) ? + "press" : "release"); + + code = MATRIX_SCAN_CODE(row, col, TWL4030_ROW_SHIFT); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, kp->keymap[code], + new_state[row] & (1 << col)); + } + kp->kp_state[row] = new_state[row]; + } + input_sync(input); +} + +/* + * Keypad interrupt handler + */ +static irqreturn_t do_kp_irq(int irq, void *_kp) +{ + struct twl4030_keypad *kp = _kp; + u8 reg; + int ret; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + /* Read & Clear TWL4030 pending interrupt */ + ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1); + + /* Release all keys if I2C has gone bad or + * the KEYP has gone to idle state */ + if (ret >= 0 && (reg & KEYP_IMR1_KP)) + twl4030_kp_scan(kp, false); + else + twl4030_kp_scan(kp, true); + + return IRQ_HANDLED; +} + +static int __devinit twl4030_kp_program(struct twl4030_keypad *kp) +{ + u8 reg; + int i; + + /* Enable controller, with hardware decoding but not autorepeat */ + reg = KEYP_CTRL_SOFT_NRST | KEYP_CTRL_SOFTMODEN + | KEYP_CTRL_TOE_EN | KEYP_CTRL_KBD_ON; + if (twl4030_kpwrite_u8(kp, reg, KEYP_CTRL) < 0) + return -EIO; + + /* NOTE: we could use sih_setup() here to package keypad + * event sources as four different IRQs ... but we don't. + */ + + /* Enable TO rising and KP rising and falling edge detection */ + reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING; + if (twl4030_kpwrite_u8(kp, reg, KEYP_EDR) < 0) + return -EIO; + + /* Set PTV prescaler Field */ + reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT); + if (twl4030_kpwrite_u8(kp, reg, KEYP_LK_PTV) < 0) + return -EIO; + + /* Set key debounce time to 20 ms */ + i = KEYP_PERIOD_US(20000, PTV_PRESCALER); + if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0) + return -EIO; + + /* Set timeout period to 100 ms */ + i = KEYP_PERIOD_US(200000, PTV_PRESCALER); + if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0) + return -EIO; + + if (twl4030_kpwrite_u8(kp, (i >> 8), KEYP_TIMEOUT_H) < 0) + return -EIO; + + /* + * Enable Clear-on-Read; disable remembering events that fire + * after the IRQ but before our handler acks (reads) them, + */ + reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK; + if (twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL) < 0) + return -EIO; + + /* initialize key state; irqs update it from here on */ + if (twl4030_read_kp_matrix_state(kp, kp->kp_state) < 0) + return -EIO; + + return 0; +} + +/* + * Registers keypad device with input subsystem + * and configures TWL4030 keypad registers + */ +static int __devinit twl4030_kp_probe(struct platform_device *pdev) +{ + struct twl4030_keypad_data *pdata = pdev->dev.platform_data; + const struct matrix_keymap_data *keymap_data = pdata->keymap_data; + struct twl4030_keypad *kp; + struct input_dev *input; + u8 reg; + int error; + + if (!pdata || !pdata->rows || !pdata->cols || + pdata->rows > TWL4030_MAX_ROWS || pdata->cols > TWL4030_MAX_COLS) { + dev_err(&pdev->dev, "Invalid platform_data\n"); + return -EINVAL; + } + + kp = kzalloc(sizeof(*kp), GFP_KERNEL); + input = input_allocate_device(); + if (!kp || !input) { + error = -ENOMEM; + goto err1; + } + + /* Get the debug Device */ + kp->dbg_dev = &pdev->dev; + kp->input = input; + + kp->n_rows = pdata->rows; + kp->n_cols = pdata->cols; + kp->irq = platform_get_irq(pdev, 0); + + /* setup input device */ + __set_bit(EV_KEY, input->evbit); + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + input_set_capability(input, EV_MSC, MSC_SCAN); + + input->name = "TWL4030 Keypad"; + input->phys = "twl4030_keypad/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0003; + + input->keycode = kp->keymap; + input->keycodesize = sizeof(kp->keymap[0]); + input->keycodemax = ARRAY_SIZE(kp->keymap); + + matrix_keypad_build_keymap(keymap_data, TWL4030_ROW_SHIFT, + input->keycode, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(kp->dbg_dev, + "Unable to register twl4030 keypad device\n"); + goto err1; + } + + error = twl4030_kp_program(kp); + if (error) + goto err2; + + /* + * This ISR will always execute in kernel thread context because of + * the need to access the TWL4030 over the I2C bus. + * + * NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ... + */ + error = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp); + if (error) { + dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n", + kp->irq); + goto err3; + } + + /* Enable KP and TO interrupts now. */ + reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO); + if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) { + error = -EIO; + goto err4; + } + + platform_set_drvdata(pdev, kp); + return 0; + +err4: + /* mask all events - we don't care about the result */ + (void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1); +err3: + free_irq(kp->irq, NULL); +err2: + input_unregister_device(input); + input = NULL; +err1: + input_free_device(input); + kfree(kp); + return error; +} + +static int __devexit twl4030_kp_remove(struct platform_device *pdev) +{ + struct twl4030_keypad *kp = platform_get_drvdata(pdev); + + free_irq(kp->irq, kp); + input_unregister_device(kp->input); + platform_set_drvdata(pdev, NULL); + kfree(kp); + + return 0; +} + +/* + * NOTE: twl4030 are multi-function devices connected via I2C. + * So this device is a child of an I2C parent, thus it needs to + * support unplug/replug (which most platform devices don't). + */ + +static struct platform_driver twl4030_kp_driver = { + .probe = twl4030_kp_probe, + .remove = __devexit_p(twl4030_kp_remove), + .driver = { + .name = "twl4030_keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init twl4030_kp_init(void) +{ + return platform_driver_register(&twl4030_kp_driver); +} +module_init(twl4030_kp_init); + +static void __exit twl4030_kp_exit(void) +{ + platform_driver_unregister(&twl4030_kp_driver); +} +module_exit(twl4030_kp_exit); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TWL4030 Keypad Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl4030_keypad"); + diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 0dc80ef..3fd21d7 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -25,6 +25,9 @@ #ifndef __TWL4030_H_ #define __TWL4030_H_ +#include +#include + /* * Using the twl4030 core we address registers using a pair * { module id, relative register offset } @@ -302,13 +305,17 @@ struct twl4030_madc_platform_data { int irq_line; }; +/* Boards have uniqe mappings of {col, row} --> keycode. + * Column and row are 4 bits, but range only from 0..7. + * a PERSISTENT_KEY is "always on" and never reported. + */ +#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_RESERVED) + struct twl4030_keypad_data { - int rows; - int cols; - int *keymap; - int irq; - unsigned int keymapsize; - unsigned int rep:1; + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; }; enum twl4030_usb_mode { -- cgit v0.10.2 From 903b9124eae00edf8a9d6491dab60fcda777aabd Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 30 Aug 2009 11:30:48 -0700 Subject: Input: w90p910_keypad - move a dereference below a NULL test We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: Julia Lawall Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 2d03dd0..6032def 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -120,7 +120,7 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) { const struct w90p910_keypad_platform_data *pdata = pdev->dev.platform_data; - const struct matrix_keymap_data *keymap_data = pdata->keymap_data; + const struct matrix_keymap_data *keymap_data; struct w90p910_keypad *keypad; struct input_dev *input_dev; struct resource *res; @@ -132,6 +132,8 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) return -EINVAL; } + keymap_data = pdata->keymap_data; + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "failed to get keypad irq\n"); -- cgit v0.10.2 From 1ba36e11b227e32f818aea5b4d84f5cbff71e7db Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 Sep 2009 17:22:04 -0700 Subject: Input: atkbd - allow setting force-release bitmap via sysfs There are more and more laptop requiring use of force_release quirk for their multimedia and other specialized keys. Adding their DMI data to the kernel is not sustainable; instead we will rely on help from userspace (HAL) to do that for us. This patch creates a new 'force_release' sysfs attribute (that belongs to serio device to which keyboard is attached) which can be used to set up force_release keymap. For example, Dell laptop owners might do: echo 133-139,143,147 > /sys/devices/platform/i8042/serio0/force_release Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 95fe045..8083508 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -68,7 +68,9 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and * are loadable via a userland utility. */ -static const unsigned short atkbd_set2_keycode[512] = { +#define ATKBD_KEYMAP_SIZE 512 + +static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES @@ -99,7 +101,7 @@ static const unsigned short atkbd_set2_keycode[512] = { #endif }; -static const unsigned short atkbd_set3_keycode[512] = { +static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, @@ -200,8 +202,8 @@ struct atkbd { char phys[32]; unsigned short id; - unsigned short keycode[512]; - DECLARE_BITMAP(force_release_mask, 512); + unsigned short keycode[ATKBD_KEYMAP_SIZE]; + DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); unsigned char set; unsigned char translated; unsigned char extra; @@ -253,6 +255,7 @@ static struct device_attribute atkbd_attr_##_name = \ __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name); ATKBD_DEFINE_ATTR(extra); +ATKBD_DEFINE_ATTR(force_release); ATKBD_DEFINE_ATTR(scroll); ATKBD_DEFINE_ATTR(set); ATKBD_DEFINE_ATTR(softrepeat); @@ -272,6 +275,7 @@ ATKBD_DEFINE_RO_ATTR(err_count); static struct attribute *atkbd_attributes[] = { &atkbd_attr_extra.attr, + &atkbd_attr_force_release.attr, &atkbd_attr_scroll.attr, &atkbd_attr_set.attr, &atkbd_attr_softrepeat.attr, @@ -926,7 +930,7 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) int i, j; memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); - bitmap_zero(atkbd->force_release_mask, 512); + bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); if (atkbd->translated) { for (i = 0; i < 128; i++) { @@ -1033,7 +1037,7 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd) input_dev->keycodesize = sizeof(unsigned short); input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); - for (i = 0; i < 512; i++) + for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) __set_bit(atkbd->keycode[i], input_dev->keybit); } @@ -1301,6 +1305,33 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun return count; } +static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) +{ + size_t len = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, + atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); + + buf[len++] = '\n'; + buf[len] = '\0'; + + return len; +} + +static ssize_t atkbd_set_force_release(struct atkbd *atkbd, + const char *buf, size_t count) +{ + /* 64 bytes on stack should be acceptable */ + DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); + int err; + + err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); + if (err) + return err; + + memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); + return count; +} + + static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); -- cgit v0.10.2 From 41c372dcad935fe7c27ec45211bad810515110bd Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 Sep 2009 17:22:03 -0700 Subject: Input: wacom_w8001 - simplify querying logic There is no need for locking when we send query and start commands to the touchscreen since there is no concurrency. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 2f33a01..56dc35c 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -25,18 +25,16 @@ MODULE_AUTHOR("Jaya Kumar "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -/* - * Definitions & global arrays. - */ - #define W8001_MAX_LENGTH 11 -#define W8001_PACKET_LEN 11 -#define W8001_LEAD_MASK 0x80 -#define W8001_LEAD_BYTE 0x80 -#define W8001_TAB_MASK 0x40 -#define W8001_TAB_BYTE 0x40 +#define W8001_LEAD_MASK 0x80 +#define W8001_LEAD_BYTE 0x80 +#define W8001_TAB_MASK 0x40 +#define W8001_TAB_BYTE 0x40 -#define W8001_QUERY_PACKET 0x20 +#define W8001_QUERY_PACKET 0x20 + +#define W8001_CMD_START '1' +#define W8001_CMD_QUERY '*' struct w8001_coord { u8 rdy; @@ -57,18 +55,19 @@ struct w8001_coord { struct w8001 { struct input_dev *dev; struct serio *serio; - struct mutex cmd_mutex; struct completion cmd_done; int id; int idx; - unsigned char expected_packet; + unsigned char response_type; + unsigned char response[W8001_MAX_LENGTH]; unsigned char data[W8001_MAX_LENGTH]; - unsigned char response[W8001_PACKET_LEN]; char phys[32]; }; -static int parse_data(u8 *data, struct w8001_coord *coord) +static void parse_data(u8 *data, struct w8001_coord *coord) { + memset(coord, 0, sizeof(*coord)); + coord->rdy = data[0] & 0x20; coord->tsw = data[0] & 0x01; coord->f1 = data[0] & 0x02; @@ -87,15 +86,15 @@ static int parse_data(u8 *data, struct w8001_coord *coord) coord->tilt_x = data[7] & 0x7F; coord->tilt_y = data[8] & 0x7F; - - return 0; } -static void w8001_process_data(struct w8001 *w8001, unsigned char data) +static irqreturn_t w8001_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) { + struct w8001 *w8001 = serio_get_drvdata(serio); struct input_dev *dev = w8001->dev; - u8 tmp; struct w8001_coord coord; + unsigned char tmp; w8001->data[w8001->idx] = data; switch (w8001->idx++) { @@ -105,12 +104,13 @@ static void w8001_process_data(struct w8001 *w8001, unsigned char data) w8001->idx = 0; } break; + case 8: tmp = w8001->data[0] & W8001_TAB_MASK; if (unlikely(tmp == W8001_TAB_BYTE)) break; + w8001->idx = 0; - memset(&coord, 0, sizeof(coord)); parse_data(w8001->data, &coord); input_report_abs(dev, ABS_X, coord.x); input_report_abs(dev, ABS_Y, coord.y); @@ -118,86 +118,48 @@ static void w8001_process_data(struct w8001 *w8001, unsigned char data) input_report_key(dev, BTN_TOUCH, coord.tsw); input_sync(dev); break; + case 10: w8001->idx = 0; - memcpy(w8001->response, &w8001->data, W8001_PACKET_LEN); - w8001->expected_packet = W8001_QUERY_PACKET; + memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH); + w8001->response_type = W8001_QUERY_PACKET; complete(&w8001->cmd_done); break; } -} - - -static irqreturn_t w8001_interrupt(struct serio *serio, - unsigned char data, unsigned int flags) -{ - struct w8001 *w8001 = serio_get_drvdata(serio); - - w8001_process_data(w8001, data); return IRQ_HANDLED; } -static int w8001_async_command(struct w8001 *w8001, unsigned char *packet, - int len) -{ - int rc = -1; - int i; - - mutex_lock(&w8001->cmd_mutex); - - for (i = 0; i < len; i++) { - if (serio_write(w8001->serio, packet[i])) - goto out; - } - rc = 0; - -out: - mutex_unlock(&w8001->cmd_mutex); - return rc; -} - -static int w8001_command(struct w8001 *w8001, unsigned char *packet, int len) +static int w8001_command(struct w8001 *w8001, unsigned char command, + bool wait_response) { - int rc = -1; - int i; + int rc; - mutex_lock(&w8001->cmd_mutex); - - serio_pause_rx(w8001->serio); + w8001->response_type = 0; init_completion(&w8001->cmd_done); - serio_continue_rx(w8001->serio); - - for (i = 0; i < len; i++) { - if (serio_write(w8001->serio, packet[i])) - goto out; - } - wait_for_completion_timeout(&w8001->cmd_done, HZ); + rc = serio_write(w8001->serio, command); + if (rc == 0 && wait_response) { - if (w8001->expected_packet == W8001_QUERY_PACKET) { - /* We are back in reporting mode, the query was ACKed */ - memcpy(packet, w8001->response, W8001_PACKET_LEN); - rc = 0; + wait_for_completion_timeout(&w8001->cmd_done, HZ); + if (w8001->response_type != W8001_QUERY_PACKET) + rc = -EIO; } -out: - mutex_unlock(&w8001->cmd_mutex); return rc; } static int w8001_setup(struct w8001 *w8001) { - struct w8001_coord coord; struct input_dev *dev = w8001->dev; - unsigned char start[1] = { '1' }; - unsigned char query[11] = { '*' }; + struct w8001_coord coord; + int error; - if (w8001_command(w8001, query, 1)) - return -1; + error = w8001_command(w8001, W8001_CMD_QUERY, true); + if (error) + return error; - memset(&coord, 0, sizeof(coord)); - parse_data(query, &coord); + parse_data(w8001->response, &coord); input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); @@ -205,10 +167,7 @@ static int w8001_setup(struct w8001 *w8001) input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); - if (w8001_async_command(w8001, start, 1)) - return -1; - - return 0; + return w8001_command(w8001, W8001_CMD_START, false); } /* @@ -249,7 +208,6 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) w8001->serio = serio; w8001->id = serio->id.id; w8001->dev = input_dev; - mutex_init(&w8001->cmd_mutex); init_completion(&w8001->cmd_done); snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); @@ -269,7 +227,8 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) if (err) goto fail2; - if (w8001_setup(w8001)) + err = w8001_setup(w8001); + if (err) goto fail3; err = input_register_device(w8001->dev); -- cgit v0.10.2 From 1c7827ae70e7c8456e08f7bb9ef2238d27814cbe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 Sep 2009 21:45:34 -0700 Subject: Input: i8042 - bypass AUX IRQ delivery test on laptops It seems that many laptops do not fully implement AUX LOOP command in their keyboard controllers, causing issues with touchpad detection. We know however that almost every laptop/portable uses a PS/2 pointing device and, even if user disables it in favor of an external mouse, the system will not use IRQ 12 for anything else. Therefore we may bypass AUX IRQ delivery test when running on a laptop and assume that it is routed properly. Just to be safe we require the box to have good PNP data in order to bypass the test. [Jin Dongming : fix crash caused by missing terminator in the DMI table] Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index ae04d8a4..66829a8 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -449,6 +449,34 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { }, { } }; + +static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = { + { + .ident = "Portable", + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + }, + { + .ident = "Laptop", + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ + }, + }, + { + .ident = "Notebook", + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + }, + { + .ident = "Sub-Notebook", + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ + }, + }, + { } +}; #endif /* @@ -727,6 +755,11 @@ static int __init i8042_pnp_init(void) i8042_kbd_irq = i8042_pnp_kbd_irq; i8042_aux_irq = i8042_pnp_aux_irq; +#ifdef CONFIG_X86 + i8042_bypass_aux_irq_test = !pnp_data_busted && + dmi_check_system(i8042_dmi_laptop_table); +#endif + return 0; } diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 9f5c050..b53a015 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -83,6 +83,8 @@ module_param_named(debug, i8042_debug, bool, 0600); MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); #endif +static bool i8042_bypass_aux_irq_test; + #include "i8042.h" static DEFINE_SPINLOCK(i8042_lock); @@ -641,7 +643,7 @@ static int __devinit i8042_check_aux(void) * used it for a PCI card or somethig else. */ - if (i8042_noloop || aux_loop_broken) { + if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) { /* * Without LOOP command we can't test AUX IRQ delivery. Assume the port * is working and hope we are right. -- cgit v0.10.2 From 7cac9cd935533e52e277c0c8799a8ba16c24f250 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 Sep 2009 21:57:48 -0700 Subject: Input: sunkbd - fix formatting Adjust the way 'switch' statements were indented; make sure we stay under 80 ciolumns. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c index e7aa935..472b566 100644 --- a/drivers/input/keyboard/sunkbd.c +++ b/drivers/input/keyboard/sunkbd.c @@ -73,7 +73,7 @@ static unsigned char sunkbd_keycode[128] = { */ struct sunkbd { - unsigned char keycode[128]; + unsigned char keycode[ARRAY_SIZE(sunkbd_keycode)]; struct input_dev *dev; struct serio *serio; struct work_struct tq; @@ -81,7 +81,7 @@ struct sunkbd { char name[64]; char phys[32]; char type; - unsigned char enabled; + bool enabled; volatile s8 reset; volatile s8 layout; }; @@ -94,10 +94,14 @@ struct sunkbd { static irqreturn_t sunkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { - struct sunkbd* sunkbd = serio_get_drvdata(serio); + struct sunkbd *sunkbd = serio_get_drvdata(serio); - if (sunkbd->reset <= -1) { /* If cp[i] is 0xff, sunkbd->reset will stay -1. */ - sunkbd->reset = data; /* The keyboard sends 0xff 0xff 0xID on powerup */ + if (sunkbd->reset <= -1) { + /* + * If cp[i] is 0xff, sunkbd->reset will stay -1. + * The keyboard sends 0xff 0xff 0xID on powerup. + */ + sunkbd->reset = data; wake_up_interruptible(&sunkbd->wait); goto out; } @@ -110,29 +114,33 @@ static irqreturn_t sunkbd_interrupt(struct serio *serio, switch (data) { - case SUNKBD_RET_RESET: - schedule_work(&sunkbd->tq); - sunkbd->reset = -1; - break; + case SUNKBD_RET_RESET: + schedule_work(&sunkbd->tq); + sunkbd->reset = -1; + break; - case SUNKBD_RET_LAYOUT: - sunkbd->layout = -1; - break; + case SUNKBD_RET_LAYOUT: + sunkbd->layout = -1; + break; - case SUNKBD_RET_ALLUP: /* All keys released */ + case SUNKBD_RET_ALLUP: /* All keys released */ + break; + + default: + if (!sunkbd->enabled) break; - default: - if (!sunkbd->enabled) - break; - - if (sunkbd->keycode[data & SUNKBD_KEY]) { - input_report_key(sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE)); - input_sync(sunkbd->dev); - } else { - printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n", - data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed"); - } + if (sunkbd->keycode[data & SUNKBD_KEY]) { + input_report_key(sunkbd->dev, + sunkbd->keycode[data & SUNKBD_KEY], + !(data & SUNKBD_RELEASE)); + input_sync(sunkbd->dev); + } else { + printk(KERN_WARNING + "sunkbd.c: Unknown key (scancode %#x) %s.\n", + data & SUNKBD_KEY, + data & SUNKBD_RELEASE ? "released" : "pressed"); + } } out: return IRQ_HANDLED; @@ -142,34 +150,37 @@ out: * sunkbd_event() handles events from the input module. */ -static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) +static int sunkbd_event(struct input_dev *dev, + unsigned int type, unsigned int code, int value) { struct sunkbd *sunkbd = input_get_drvdata(dev); switch (type) { - case EV_LED: + case EV_LED: - serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); - serio_write(sunkbd->serio, - (!!test_bit(LED_CAPSL, dev->led) << 3) | (!!test_bit(LED_SCROLLL, dev->led) << 2) | - (!!test_bit(LED_COMPOSE, dev->led) << 1) | !!test_bit(LED_NUML, dev->led)); - return 0; + serio_write(sunkbd->serio, SUNKBD_CMD_SETLED); + serio_write(sunkbd->serio, + (!!test_bit(LED_CAPSL, dev->led) << 3) | + (!!test_bit(LED_SCROLLL, dev->led) << 2) | + (!!test_bit(LED_COMPOSE, dev->led) << 1) | + !!test_bit(LED_NUML, dev->led)); + return 0; - case EV_SND: + case EV_SND: - switch (code) { + switch (code) { - case SND_CLICK: - serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value); - return 0; + case SND_CLICK: + serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - value); + return 0; - case SND_BELL: - serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value); - return 0; - } + case SND_BELL: + serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - value); + return 0; + } - break; + break; } return -1; @@ -193,9 +204,12 @@ static int sunkbd_initialize(struct sunkbd *sunkbd) if (sunkbd->type == 4) { /* Type 4 keyboard */ sunkbd->layout = -2; serio_write(sunkbd->serio, SUNKBD_CMD_LAYOUT); - wait_event_interruptible_timeout(sunkbd->wait, sunkbd->layout >= 0, HZ/4); - if (sunkbd->layout < 0) return -1; - if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) sunkbd->type = 5; + wait_event_interruptible_timeout(sunkbd->wait, + sunkbd->layout >= 0, HZ / 4); + if (sunkbd->layout < 0) + return -1; + if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) + sunkbd->type = 5; } return 0; @@ -218,11 +232,13 @@ static void sunkbd_reinit(struct work_struct *work) (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led)); - serio_write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); - serio_write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); + serio_write(sunkbd->serio, + SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); + serio_write(sunkbd->serio, + SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); } -static void sunkbd_enable(struct sunkbd *sunkbd, int enable) +static void sunkbd_enable(struct sunkbd *sunkbd, bool enable) { serio_pause_rx(sunkbd->serio); sunkbd->enabled = enable; @@ -230,7 +246,8 @@ static void sunkbd_enable(struct sunkbd *sunkbd, int enable) } /* - * sunkbd_connect() probes for a Sun keyboard and fills the necessary structures. + * sunkbd_connect() probes for a Sun keyboard and fills the necessary + * structures. */ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) @@ -262,7 +279,8 @@ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) goto fail3; } - snprintf(sunkbd->name, sizeof(sunkbd->name), "Sun Type %d keyboard", sunkbd->type); + snprintf(sunkbd->name, sizeof(sunkbd->name), + "Sun Type %d keyboard", sunkbd->type); memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode)); input_dev->name = sunkbd->name; @@ -286,11 +304,11 @@ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) input_dev->keycode = sunkbd->keycode; input_dev->keycodesize = sizeof(unsigned char); input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode); - for (i = 0; i < 128; i++) - set_bit(sunkbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); + for (i = 0; i < ARRAY_SIZE(sunkbd_keycode); i++) + __set_bit(sunkbd->keycode[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); - sunkbd_enable(sunkbd, 1); + sunkbd_enable(sunkbd, true); err = input_register_device(sunkbd->dev); if (err) @@ -298,7 +316,7 @@ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) return 0; - fail4: sunkbd_enable(sunkbd, 0); + fail4: sunkbd_enable(sunkbd, false); fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(input_dev); @@ -314,7 +332,7 @@ static void sunkbd_disconnect(struct serio *serio) { struct sunkbd *sunkbd = serio_get_drvdata(serio); - sunkbd_enable(sunkbd, 0); + sunkbd_enable(sunkbd, false); input_unregister_device(sunkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); -- cgit v0.10.2 From bd96f37895197563bc1d6d6f7c012b3ae7df1c45 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 4 Sep 2009 23:46:18 -0700 Subject: Input: pxa27x_keypad - allow modifying keymap from userspace Tested-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h index 63e8965..7b4eadc 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h @@ -6,6 +6,8 @@ #define MAX_MATRIX_KEY_ROWS (8) #define MAX_MATRIX_KEY_COLS (8) +#define MATRIX_ROW_SHIFT (3) +#define MAX_DIRECT_KEY_NUM (8) /* pxa3xx keypad platform specific parameters * @@ -34,7 +36,7 @@ struct pxa27x_keypad_platform_data { /* direct keys */ int direct_key_num; - unsigned int direct_key_map[8]; + unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; /* rotary encoders 0 */ int enable_rotary0; diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index c987cc7..76f9668 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -32,7 +32,6 @@ #include #include - /* * Keypad Controller registers */ @@ -96,7 +95,8 @@ #define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) #define keypad_writel(off, v) __raw_writel((v), keypad->mmio_base + (off)) -#define MAX_MATRIX_KEY_NUM (8 * 8) +#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) +#define MAX_KEYPAD_KEYS (MAX_MATRIX_KEY_NUM + MAX_DIRECT_KEY_NUM) struct pxa27x_keypad { struct pxa27x_keypad_platform_data *pdata; @@ -107,73 +107,82 @@ struct pxa27x_keypad { int irq; - /* matrix key code map */ - unsigned short matrix_keycodes[MAX_MATRIX_KEY_NUM]; + unsigned short keycodes[MAX_KEYPAD_KEYS]; + int rotary_rel_code[2]; /* state row bits of each column scan */ uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS]; uint32_t direct_key_state; unsigned int direct_key_mask; - - int rotary_rel_code[2]; - int rotary_up_key[2]; - int rotary_down_key[2]; }; static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) { struct pxa27x_keypad_platform_data *pdata = keypad->pdata; struct input_dev *input_dev = keypad->input_dev; + unsigned short keycode; int i; for (i = 0; i < pdata->matrix_key_map_size; i++) { unsigned int key = pdata->matrix_key_map[i]; unsigned int row = KEY_ROW(key); unsigned int col = KEY_COL(key); - unsigned short code = KEY_VAL(key); + unsigned int scancode = MATRIX_SCAN_CODE(row, col, + MATRIX_ROW_SHIFT); - keypad->matrix_keycodes[(row << 3) + col] = code; - __set_bit(code, input_dev->keybit); + keycode = KEY_VAL(key); + keypad->keycodes[scancode] = keycode; + __set_bit(keycode, input_dev->keybit); } - __clear_bit(KEY_RESERVED, input_dev->keybit); - - for (i = 0; i < pdata->direct_key_num; i++) - __set_bit(pdata->direct_key_map[i], input_dev->keybit); - keypad->rotary_up_key[0] = pdata->rotary0_up_key; - keypad->rotary_up_key[1] = pdata->rotary1_up_key; - keypad->rotary_down_key[0] = pdata->rotary0_down_key; - keypad->rotary_down_key[1] = pdata->rotary1_down_key; - keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; - keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; + for (i = 0; i < pdata->direct_key_num; i++) { + keycode = pdata->direct_key_map[i]; + keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = keycode; + __set_bit(keycode, input_dev->keybit); + } if (pdata->enable_rotary0) { if (pdata->rotary0_up_key && pdata->rotary0_down_key) { - __set_bit(pdata->rotary0_up_key, input_dev->keybit); - __set_bit(pdata->rotary0_down_key, input_dev->keybit); - } else + keycode = pdata->rotary0_up_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 0] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = pdata->rotary0_down_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 1] = keycode; + __set_bit(keycode, input_dev->keybit); + + keypad->rotary_rel_code[0] = -1; + } else { + keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; __set_bit(pdata->rotary0_rel_code, input_dev->relbit); + } } if (pdata->enable_rotary1) { if (pdata->rotary1_up_key && pdata->rotary1_down_key) { - __set_bit(pdata->rotary1_up_key, input_dev->keybit); - __set_bit(pdata->rotary1_down_key, input_dev->keybit); - } else + keycode = pdata->rotary1_up_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 2] = keycode; + __set_bit(keycode, input_dev->keybit); + + keycode = pdata->rotary1_down_key; + keypad->keycodes[MAX_MATRIX_KEY_NUM + 3] = keycode; + __set_bit(keycode, input_dev->keybit); + + keypad->rotary_rel_code[1] = -1; + } else { + keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; __set_bit(pdata->rotary1_rel_code, input_dev->relbit); + } } -} -static inline unsigned int lookup_matrix_keycode( - struct pxa27x_keypad *keypad, int row, int col) -{ - return keypad->matrix_keycodes[(row << 3) + col]; + __clear_bit(KEY_RESERVED, input_dev->keybit); } static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad) { struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; int row, col, num_keys_pressed = 0; uint32_t new_state[MAX_MATRIX_KEY_COLS]; uint32_t kpas = keypad_readl(KPAS); @@ -216,6 +225,7 @@ static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad) scan: for (col = 0; col < pdata->matrix_key_cols; col++) { uint32_t bits_changed; + int code; bits_changed = keypad->matrix_key_state[col] ^ new_state[col]; if (bits_changed == 0) @@ -225,12 +235,13 @@ scan: if ((bits_changed & (1 << row)) == 0) continue; - input_report_key(keypad->input_dev, - lookup_matrix_keycode(keypad, row, col), - new_state[col] & (1 << row)); + code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + new_state[col] & (1 << row)); } } - input_sync(keypad->input_dev); + input_sync(input_dev); memcpy(keypad->matrix_key_state, new_state, sizeof(new_state)); } @@ -253,13 +264,15 @@ static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta) if (delta == 0) return; - if (keypad->rotary_up_key[r] && keypad->rotary_down_key[r]) { - int keycode = (delta > 0) ? keypad->rotary_up_key[r] : - keypad->rotary_down_key[r]; + if (keypad->rotary_rel_code[r] == -1) { + int code = MAX_MATRIX_KEY_NUM + 2 * r + (delta > 0 ? 0 : 1); + unsigned char keycode = keypad->keycodes[code]; /* simulate a press-n-release */ + input_event(dev, EV_MSC, MSC_SCAN, code); input_report_key(dev, keycode, 1); input_sync(dev); + input_event(dev, EV_MSC, MSC_SCAN, code); input_report_key(dev, keycode, 0); input_sync(dev); } else { @@ -287,6 +300,7 @@ static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad) static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) { struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; unsigned int new_state; uint32_t kpdk, bits_changed; int i; @@ -296,9 +310,6 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) if (pdata->enable_rotary0 || pdata->enable_rotary1) pxa27x_keypad_scan_rotary(keypad); - if (pdata->direct_key_map == NULL) - return; - new_state = KPDK_DK(kpdk) & keypad->direct_key_mask; bits_changed = keypad->direct_key_state ^ new_state; @@ -306,12 +317,15 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) return; for (i = 0; i < pdata->direct_key_num; i++) { - if (bits_changed & (1 << i)) - input_report_key(keypad->input_dev, - pdata->direct_key_map[i], - (new_state & (1 << i))); + if (bits_changed & (1 << i)) { + int code = MAX_MATRIX_KEY_NUM + i; + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + new_state & (1 << i)); + } } - input_sync(keypad->input_dev); + input_sync(input_dev); keypad->direct_key_state = new_state; } @@ -432,38 +446,41 @@ static const struct dev_pm_ops pxa27x_keypad_pm_ops = { static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) { + struct pxa27x_keypad_platform_data *pdata = pdev->dev.platform_data; struct pxa27x_keypad *keypad; struct input_dev *input_dev; struct resource *res; int irq, error; - keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL); - if (keypad == NULL) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); - return -ENOMEM; - } - - keypad->pdata = pdev->dev.platform_data; - if (keypad->pdata == NULL) { + if (pdata == NULL) { dev_err(&pdev->dev, "no platform data defined\n"); - error = -EINVAL; - goto failed_free; + return -EINVAL; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "failed to get keypad irq\n"); - error = -ENXIO; - goto failed_free; + return -ENXIO; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "failed to get I/O memory\n"); - error = -ENXIO; + return -ENXIO; + } + + keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + error = -ENOMEM; goto failed_free; } + keypad->pdata = pdata; + keypad->input_dev = input_dev; + keypad->irq = irq; + res = request_mem_region(res->start, resource_size(res), pdev->name); if (res == NULL) { dev_err(&pdev->dev, "failed to request I/O memory\n"); @@ -485,43 +502,35 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free_io; } - /* Create and register the input driver. */ - input_dev = input_allocate_device(); - if (!input_dev) { - dev_err(&pdev->dev, "failed to allocate input device\n"); - error = -ENOMEM; - goto failed_put_clk; - } - input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->open = pxa27x_keypad_open; input_dev->close = pxa27x_keypad_close; input_dev->dev.parent = &pdev->dev; - keypad->input_dev = input_dev; + input_dev->keycode = keypad->keycodes; + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + input_set_drvdata(input_dev, keypad); input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - if ((keypad->pdata->enable_rotary0 && - keypad->pdata->rotary0_rel_code) || - (keypad->pdata->enable_rotary1 && - keypad->pdata->rotary1_rel_code)) { - input_dev->evbit[0] |= BIT_MASK(EV_REL); - } + input_set_capability(input_dev, EV_MSC, MSC_SCAN); pxa27x_keypad_build_keycode(keypad); - platform_set_drvdata(pdev, keypad); + + if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) || + (pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + } error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); - goto failed_free_dev; + goto failed_put_clk; } - keypad->irq = irq; - /* Register the input device */ error = input_register_device(input_dev); if (error) { @@ -529,15 +538,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free_irq; } + platform_set_drvdata(pdev, keypad); device_init_wakeup(&pdev->dev, 1); return 0; failed_free_irq: free_irq(irq, pdev); - platform_set_drvdata(pdev, NULL); -failed_free_dev: - input_free_device(input_dev); failed_put_clk: clk_put(keypad->clk); failed_free_io: @@ -545,6 +552,7 @@ failed_free_io: failed_free_mem: release_mem_region(res->start, resource_size(res)); failed_free: + input_free_device(input_dev); kfree(keypad); return error; } @@ -567,6 +575,7 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); kfree(keypad); + return 0; } -- cgit v0.10.2 From 5ddbc77c3eb54336fcd44b7b66b44784d65677e2 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:08:15 -0700 Subject: Input: i8042 - try disabling and re-enabling AUX port at close Ever since we switched from having a polling timer to registering IRQ handlers for both keyboard and AUX ports at the driver registration time, on certain boxes probing for a mouse results in keyboard stopping working. The only real difference between old and new way is that before we disabled ports after unsuccessful probe whereas now we leave them as is. Try to emulate the old behavior by disabling and immediately re-enabling AUX and KBD ports when corresponding serio port is being closed. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index b53a015..8aaf8fc 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -264,6 +264,49 @@ static int i8042_aux_write(struct serio *serio, unsigned char c) I8042_CMD_MUX_SEND + port->mux); } + +/* + * i8042_aux_close attempts to clear AUX or KBD port state by disabling + * and then re-enabling it. + */ + +static void i8042_port_close(struct serio *serio) +{ + int irq_bit; + int disable_bit; + const char *port_name; + + if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) { + irq_bit = I8042_CTR_AUXINT; + disable_bit = I8042_CTR_AUXDIS; + port_name = "AUX"; + } else { + irq_bit = I8042_CTR_KBDINT; + disable_bit = I8042_CTR_KBDDIS; + port_name = "KBD"; + } + + i8042_ctr &= ~irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING + "i8042.c: Can't write CTR while closing %s port.\n", + port_name); + + udelay(50); + + i8042_ctr &= ~disable_bit; + i8042_ctr |= irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n", + port_name); + + /* + * See if there is any data appeared while we were messing with + * port state. + */ + i8042_interrupt(0, NULL); +} + /* * i8042_start() is called by serio core when port is about to finish * registering. It will mark port as existing so i8042_interrupt can @@ -393,7 +436,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id) } /* - * i8042_enable_kbd_port enables keybaord port on chip + * i8042_enable_kbd_port enables keyboard port on chip */ static int i8042_enable_kbd_port(void) @@ -841,6 +884,9 @@ static void i8042_controller_reset(void) i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); + if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n"); + /* * Disable MUX mode if present. */ @@ -1026,6 +1072,7 @@ static int __devinit i8042_create_kbd_port(void) serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; serio->start = i8042_start; serio->stop = i8042_stop; + serio->close = i8042_port_close; serio->port_data = port; serio->dev.parent = &i8042_platform_device->dev; strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name)); @@ -1056,6 +1103,7 @@ static int __devinit i8042_create_aux_port(int idx) if (idx < 0) { strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name)); strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + serio->close = i8042_port_close; } else { snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); -- cgit v0.10.2 From 386b384900a200d5fcabdd4a9c27eb21db606cd4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:08:16 -0700 Subject: Input: i8042 - use boolean type where it makes sense Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 66829a8..248a6ac 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -550,9 +550,9 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { #ifdef CONFIG_PNP #include -static int i8042_pnp_kbd_registered; +static bool i8042_pnp_kbd_registered; static unsigned int i8042_pnp_kbd_devices; -static int i8042_pnp_aux_registered; +static bool i8042_pnp_aux_registered; static unsigned int i8042_pnp_aux_devices; static int i8042_pnp_command_reg; @@ -640,12 +640,12 @@ static struct pnp_driver i8042_pnp_aux_driver = { static void i8042_pnp_exit(void) { if (i8042_pnp_kbd_registered) { - i8042_pnp_kbd_registered = 0; + i8042_pnp_kbd_registered = false; pnp_unregister_driver(&i8042_pnp_kbd_driver); } if (i8042_pnp_aux_registered) { - i8042_pnp_aux_registered = 0; + i8042_pnp_aux_registered = false; pnp_unregister_driver(&i8042_pnp_aux_driver); } } @@ -653,12 +653,12 @@ static void i8042_pnp_exit(void) static int __init i8042_pnp_init(void) { char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 }; - int pnp_data_busted = 0; + int pnp_data_busted = false; int err; #ifdef CONFIG_X86 if (dmi_check_system(i8042_dmi_nopnp_table)) - i8042_nopnp = 1; + i8042_nopnp = true; #endif if (i8042_nopnp) { @@ -668,11 +668,11 @@ static int __init i8042_pnp_init(void) err = pnp_register_driver(&i8042_pnp_kbd_driver); if (!err) - i8042_pnp_kbd_registered = 1; + i8042_pnp_kbd_registered = true; err = pnp_register_driver(&i8042_pnp_aux_driver); if (!err) - i8042_pnp_aux_registered = 1; + i8042_pnp_aux_registered = true; if (!i8042_pnp_kbd_devices && !i8042_pnp_aux_devices) { i8042_pnp_exit(); @@ -700,9 +700,9 @@ static int __init i8042_pnp_init(void) #if defined(__ia64__) if (!i8042_pnp_kbd_devices) - i8042_nokbd = 1; + i8042_nokbd = true; if (!i8042_pnp_aux_devices) - i8042_noaux = 1; + i8042_noaux = true; #endif if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) && @@ -713,7 +713,7 @@ static int __init i8042_pnp_init(void) "using default %#x\n", i8042_pnp_data_reg, i8042_data_reg); i8042_pnp_data_reg = i8042_data_reg; - pnp_data_busted = 1; + pnp_data_busted = true; } if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) && @@ -724,7 +724,7 @@ static int __init i8042_pnp_init(void) "using default %#x\n", i8042_pnp_command_reg, i8042_command_reg); i8042_pnp_command_reg = i8042_command_reg; - pnp_data_busted = 1; + pnp_data_busted = true; } if (!i8042_nokbd && !i8042_pnp_kbd_irq) { @@ -732,7 +732,7 @@ static int __init i8042_pnp_init(void) "PNP: PS/2 controller doesn't have KBD irq; " "using default %d\n", i8042_kbd_irq); i8042_pnp_kbd_irq = i8042_kbd_irq; - pnp_data_busted = 1; + pnp_data_busted = true; } if (!i8042_noaux && !i8042_pnp_aux_irq) { @@ -741,7 +741,7 @@ static int __init i8042_pnp_init(void) "PNP: PS/2 appears to have AUX port disabled, " "if this is incorrect please boot with " "i8042.nopnp\n"); - i8042_noaux = 1; + i8042_noaux = true; } else { printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; " @@ -788,21 +788,21 @@ static int __init i8042_platform_init(void) return retval; #if defined(__ia64__) - i8042_reset = 1; + i8042_reset = true; #endif #ifdef CONFIG_X86 if (dmi_check_system(i8042_dmi_reset_table)) - i8042_reset = 1; + i8042_reset = true; if (dmi_check_system(i8042_dmi_noloop_table)) - i8042_noloop = 1; + i8042_noloop = true; if (dmi_check_system(i8042_dmi_nomux_table)) - i8042_nomux = 1; + i8042_nomux = true; if (dmi_check_system(i8042_dmi_dritek_table)) - i8042_dritek = 1; + i8042_dritek = true; #endif /* CONFIG_X86 */ return retval; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 8aaf8fc..61ed7a9 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -28,35 +28,35 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); MODULE_LICENSE("GPL"); -static unsigned int i8042_nokbd; +static bool i8042_nokbd; module_param_named(nokbd, i8042_nokbd, bool, 0); MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port."); -static unsigned int i8042_noaux; +static bool i8042_noaux; module_param_named(noaux, i8042_noaux, bool, 0); MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); -static unsigned int i8042_nomux; +static bool i8042_nomux; module_param_named(nomux, i8042_nomux, bool, 0); MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); -static unsigned int i8042_unlock; +static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); -static unsigned int i8042_reset; +static bool i8042_reset; module_param_named(reset, i8042_reset, bool, 0); MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); -static unsigned int i8042_direct; +static bool i8042_direct; module_param_named(direct, i8042_direct, bool, 0); MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); -static unsigned int i8042_dumbkbd; +static bool i8042_dumbkbd; module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); -static unsigned int i8042_noloop; +static bool i8042_noloop; module_param_named(noloop, i8042_noloop, bool, 0); MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); @@ -65,20 +65,20 @@ module_param_named(panicblink, i8042_blink_frequency, uint, 0600); MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); #ifdef CONFIG_X86 -static unsigned int i8042_dritek; +static bool i8042_dritek; module_param_named(dritek, i8042_dritek, bool, 0); MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); #endif #ifdef CONFIG_PNP -static int i8042_nopnp; +static bool i8042_nopnp; module_param_named(nopnp, i8042_nopnp, bool, 0); MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); #endif #define DEBUG #ifdef DEBUG -static int i8042_debug; +static bool i8042_debug; module_param_named(debug, i8042_debug, bool, 0600); MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); #endif @@ -92,7 +92,7 @@ static DEFINE_SPINLOCK(i8042_lock); struct i8042_port { struct serio *serio; int irq; - unsigned char exists; + bool exists; signed char mux; }; @@ -105,9 +105,9 @@ static struct i8042_port i8042_ports[I8042_NUM_PORTS]; static unsigned char i8042_initial_ctr; static unsigned char i8042_ctr; -static unsigned char i8042_mux_present; -static unsigned char i8042_kbd_irq_registered; -static unsigned char i8042_aux_irq_registered; +static bool i8042_mux_present; +static bool i8042_kbd_irq_registered; +static bool i8042_aux_irq_registered; static unsigned char i8042_suppress_kbd_ack; static struct platform_device *i8042_platform_device; @@ -316,7 +316,7 @@ static int i8042_start(struct serio *serio) { struct i8042_port *port = serio->port_data; - port->exists = 1; + port->exists = true; mb(); return 0; } @@ -330,7 +330,7 @@ static void i8042_stop(struct serio *serio) { struct i8042_port *port = serio->port_data; - port->exists = 0; + port->exists = false; /* * We synchronize with both AUX and KBD IRQs because there is @@ -492,14 +492,15 @@ static int i8042_enable_mux_ports(void) } /* - * i8042_set_mux_mode checks whether the controller has an active - * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode. + * i8042_set_mux_mode checks whether the controller has an + * active multiplexor and puts the chip into Multiplexed (true) + * or Legacy (false) mode. */ -static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) +static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) { - unsigned char param; + unsigned char param, val; /* * Get rid of bytes in the queue. */ @@ -511,14 +512,21 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) * mouse interface, the last should be version. */ - param = 0xf0; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0xf0) + param = val = 0xf0; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) + return -1; + param = val = multiplex ? 0x56 : 0xf6; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) return -1; - param = mode ? 0x56 : 0xf6; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6)) + param = val = multiplex ? 0xa4 : 0xa5; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == val) return -1; - param = mode ? 0xa4 : 0xa5; - if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5)) + +/* + * Workaround for interference with USB Legacy emulation + * that causes a v10.12 MUX to be found. + */ + if (param == 0xac) return -1; if (mux_version) @@ -537,14 +545,7 @@ static int __devinit i8042_check_mux(void) { unsigned char mux_version; - if (i8042_set_mux_mode(1, &mux_version)) - return -1; - -/* - * Workaround for interference with USB Legacy emulation - * that causes a v10.12 MUX to be found. - */ - if (mux_version == 0xAC) + if (i8042_set_mux_mode(true, &mux_version)) return -1; printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n", @@ -561,7 +562,7 @@ static int __devinit i8042_check_mux(void) return -EIO; } - i8042_mux_present = 1; + i8042_mux_present = true; return 0; } @@ -570,7 +571,7 @@ static int __devinit i8042_check_mux(void) * The following is used to test AUX IRQ delivery. */ static struct completion i8042_aux_irq_delivered __devinitdata; -static int i8042_irq_being_tested __devinitdata; +static bool i8042_irq_being_tested __devinitdata; static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) { @@ -597,7 +598,7 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) * verifies success by readinng CTR. Used when testing for presence of AUX * port. */ -static int __devinit i8042_toggle_aux(int on) +static int __devinit i8042_toggle_aux(bool on) { unsigned char param; int i; @@ -628,8 +629,8 @@ static int __devinit i8042_toggle_aux(int on) static int __devinit i8042_check_aux(void) { int retval = -1; - int irq_registered = 0; - int aux_loop_broken = 0; + bool irq_registered = false; + bool aux_loop_broken = false; unsigned long flags; unsigned char param; @@ -666,19 +667,19 @@ static int __devinit i8042_check_aux(void) * mark it as broken */ if (!retval) - aux_loop_broken = 1; + aux_loop_broken = true; } /* * Bit assignment test - filters out PS/2 i8042's in AT mode */ - if (i8042_toggle_aux(0)) { + if (i8042_toggle_aux(false)) { printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); } - if (i8042_toggle_aux(1)) + if (i8042_toggle_aux(true)) return -1; /* @@ -699,7 +700,7 @@ static int __devinit i8042_check_aux(void) "i8042", i8042_platform_device)) goto out; - irq_registered = 1; + irq_registered = true; if (i8042_enable_aux_port()) goto out; @@ -707,7 +708,7 @@ static int __devinit i8042_check_aux(void) spin_lock_irqsave(&i8042_lock, flags); init_completion(&i8042_aux_irq_delivered); - i8042_irq_being_tested = 1; + i8042_irq_being_tested = true; param = 0xa5; retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff); @@ -844,7 +845,7 @@ static int i8042_controller_init(void) */ if (~i8042_ctr & I8042_CTR_XLATE) - i8042_direct = 1; + i8042_direct = true; /* * Set nontranslated mode for the kbd interface if requested by an option. @@ -892,7 +893,7 @@ static void i8042_controller_reset(void) */ if (i8042_mux_present) - i8042_set_mux_mode(0, NULL); + i8042_set_mux_mode(false, NULL); /* * Reset the controller if requested. @@ -1025,7 +1026,7 @@ static int i8042_pm_restore(struct device *dev) #endif if (i8042_mux_present) { - if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) + if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports()) printk(KERN_WARNING "i8042: failed to resume active multiplexor, " "mouse won't work.\n"); @@ -1167,7 +1168,7 @@ static void i8042_free_irqs(void) if (i8042_kbd_irq_registered) free_irq(I8042_KBD_IRQ, i8042_platform_device); - i8042_aux_irq_registered = i8042_kbd_irq_registered = 0; + i8042_aux_irq_registered = i8042_kbd_irq_registered = false; } static int __devinit i8042_setup_aux(void) @@ -1201,7 +1202,7 @@ static int __devinit i8042_setup_aux(void) if (aux_enable()) goto err_free_irq; - i8042_aux_irq_registered = 1; + i8042_aux_irq_registered = true; return 0; err_free_irq: @@ -1228,7 +1229,7 @@ static int __devinit i8042_setup_kbd(void) if (error) goto err_free_irq; - i8042_kbd_irq_registered = 1; + i8042_kbd_irq_registered = true; return 0; err_free_irq: -- cgit v0.10.2 From f81134163fc785622f58af27363079ba1de7c7aa Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:08:17 -0700 Subject: Input: i8042 - use platform_driver_probe i8042 is not hot-pluggable and we create the device when we register the driver, so let's save some memory by using platform_device_probe and using __init instead of __devinit. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 61ed7a9..eb3ff94 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -541,7 +541,7 @@ static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) * LCS/Telegraphics. */ -static int __devinit i8042_check_mux(void) +static int __init i8042_check_mux(void) { unsigned char mux_version; @@ -570,10 +570,10 @@ static int __devinit i8042_check_mux(void) /* * The following is used to test AUX IRQ delivery. */ -static struct completion i8042_aux_irq_delivered __devinitdata; -static bool i8042_irq_being_tested __devinitdata; +static struct completion i8042_aux_irq_delivered __initdata; +static bool i8042_irq_being_tested __initdata; -static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) +static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id) { unsigned long flags; unsigned char str, data; @@ -598,7 +598,7 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) * verifies success by readinng CTR. Used when testing for presence of AUX * port. */ -static int __devinit i8042_toggle_aux(bool on) +static int __init i8042_toggle_aux(bool on) { unsigned char param; int i; @@ -626,7 +626,7 @@ static int __devinit i8042_toggle_aux(bool on) * the presence of an AUX interface. */ -static int __devinit i8042_check_aux(void) +static int __init i8042_check_aux(void) { int retval = -1; bool irq_registered = false; @@ -1060,7 +1060,7 @@ static void i8042_shutdown(struct platform_device *dev) i8042_controller_reset(); } -static int __devinit i8042_create_kbd_port(void) +static int __init i8042_create_kbd_port(void) { struct serio *serio; struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; @@ -1085,7 +1085,7 @@ static int __devinit i8042_create_kbd_port(void) return 0; } -static int __devinit i8042_create_aux_port(int idx) +static int __init i8042_create_aux_port(int idx) { struct serio *serio; int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx; @@ -1117,13 +1117,13 @@ static int __devinit i8042_create_aux_port(int idx) return 0; } -static void __devinit i8042_free_kbd_port(void) +static void __init i8042_free_kbd_port(void) { kfree(i8042_ports[I8042_KBD_PORT_NO].serio); i8042_ports[I8042_KBD_PORT_NO].serio = NULL; } -static void __devinit i8042_free_aux_ports(void) +static void __init i8042_free_aux_ports(void) { int i; @@ -1133,7 +1133,7 @@ static void __devinit i8042_free_aux_ports(void) } } -static void __devinit i8042_register_ports(void) +static void __init i8042_register_ports(void) { int i; @@ -1171,7 +1171,7 @@ static void i8042_free_irqs(void) i8042_aux_irq_registered = i8042_kbd_irq_registered = false; } -static int __devinit i8042_setup_aux(void) +static int __init i8042_setup_aux(void) { int (*aux_enable)(void); int error; @@ -1212,7 +1212,7 @@ static int __devinit i8042_setup_aux(void) return error; } -static int __devinit i8042_setup_kbd(void) +static int __init i8042_setup_kbd(void) { int error; @@ -1239,7 +1239,7 @@ static int __devinit i8042_setup_kbd(void) return error; } -static int __devinit i8042_probe(struct platform_device *dev) +static int __init i8042_probe(struct platform_device *dev) { int error; @@ -1299,7 +1299,6 @@ static struct platform_driver i8042_driver = { .pm = &i8042_pm_ops, #endif }, - .probe = i8042_probe, .remove = __devexit_p(i8042_remove), .shutdown = i8042_shutdown, }; @@ -1318,28 +1317,28 @@ static int __init i8042_init(void) if (err) goto err_platform_exit; - err = platform_driver_register(&i8042_driver); - if (err) - goto err_platform_exit; - i8042_platform_device = platform_device_alloc("i8042", -1); if (!i8042_platform_device) { err = -ENOMEM; - goto err_unregister_driver; + goto err_platform_exit; } err = platform_device_add(i8042_platform_device); if (err) goto err_free_device; + err = platform_driver_probe(&i8042_driver, i8042_probe); + if (err) + goto err_del_device; + panic_blink = i8042_panic_blink; return 0; + err_del_device: + platform_device_del(i8042_platform_device); err_free_device: platform_device_put(i8042_platform_device); - err_unregister_driver: - platform_driver_unregister(&i8042_driver); err_platform_exit: i8042_platform_exit(); @@ -1348,8 +1347,8 @@ static int __init i8042_init(void) static void __exit i8042_exit(void) { - platform_device_unregister(i8042_platform_device); platform_driver_unregister(&i8042_driver); + platform_device_unregister(i8042_platform_device); i8042_platform_exit(); panic_blink = NULL; -- cgit v0.10.2 From b7802c5c1ea9563f3746bea09c214ccedc8600f4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:13:20 -0700 Subject: Input: psmouse - use boolean type Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 5547e24..f361106 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -279,7 +279,7 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int * subsequent commands. It looks like glidepad is behind stickpointer, * I'd thought it would be other way around... */ -static int alps_passthrough_mode(struct psmouse *psmouse, int enable) +static int alps_passthrough_mode(struct psmouse *psmouse, bool enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11; @@ -367,16 +367,16 @@ static int alps_poll(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char buf[6]; - int poll_failed; + bool poll_failed; if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, 1); + alps_passthrough_mode(psmouse, true); poll_failed = ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, 0); + alps_passthrough_mode(psmouse, false); if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0) return -1; @@ -401,10 +401,12 @@ static int alps_hw_init(struct psmouse *psmouse, int *version) if (!priv->i) return -1; - if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1)) + if ((priv->i->flags & ALPS_PASS) && + alps_passthrough_mode(psmouse, true)) { return -1; + } - if (alps_tap_mode(psmouse, 1)) { + if (alps_tap_mode(psmouse, true)) { printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); return -1; } @@ -414,8 +416,10 @@ static int alps_hw_init(struct psmouse *psmouse, int *version) return -1; } - if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0)) + if ((priv->i->flags & ALPS_PASS) && + alps_passthrough_mode(psmouse, false)) { return -1; + } /* ALPS needs stream mode, otherwise it won't report any data */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { @@ -519,7 +523,7 @@ init_fail: return -1; } -int alps_detect(struct psmouse *psmouse, int set_properties) +int alps_detect(struct psmouse *psmouse, bool set_properties) { int version; const struct alps_model_info *model; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 4bbddc9..bc87936 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -26,10 +26,10 @@ struct alps_data { }; #ifdef CONFIG_MOUSE_PS2_ALPS -int alps_detect(struct psmouse *psmouse, int set_properties); +int alps_detect(struct psmouse *psmouse, bool set_properties); int alps_init(struct psmouse *psmouse); #else -inline int alps_detect(struct psmouse *psmouse, int set_properties) +inline int alps_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 4bc78892..fda35e6 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -553,7 +553,7 @@ static struct attribute_group elantech_attr_group = { /* * Use magic knock to detect Elantech touchpad */ -int elantech_detect(struct psmouse *psmouse, int set_properties) +int elantech_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[3]; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index ed848cc..feac5f7 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -109,10 +109,10 @@ struct elantech_data { }; #ifdef CONFIG_MOUSE_PS2_ELANTECH -int elantech_detect(struct psmouse *psmouse, int set_properties); +int elantech_detect(struct psmouse *psmouse, bool set_properties); int elantech_init(struct psmouse *psmouse); #else -static inline int elantech_detect(struct psmouse *psmouse, int set_properties) +static inline int elantech_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index f5aa035..de1e553 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -367,7 +367,7 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, } __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL, - hgpk_show_powered, hgpk_set_powered, 0); + hgpk_show_powered, hgpk_set_powered, false); static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse, void *data, char *buf) @@ -396,7 +396,7 @@ static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, } __PSMOUSE_DEFINE_ATTR(recalibrate, S_IWUSR | S_IRUGO, NULL, - hgpk_trigger_recal_show, hgpk_trigger_recal, 0); + hgpk_trigger_recal_show, hgpk_trigger_recal, false); static void hgpk_disconnect(struct psmouse *psmouse) { @@ -489,7 +489,7 @@ int hgpk_init(struct psmouse *psmouse) psmouse->private = priv; priv->psmouse = psmouse; - priv->powered = 1; + priv->powered = true; INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work); err = psmouse_reset(psmouse); @@ -532,7 +532,7 @@ static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) return param[2]; } -int hgpk_detect(struct psmouse *psmouse, int set_properties) +int hgpk_detect(struct psmouse *psmouse, bool set_properties) { int version; diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h index a4b2a96..d61cfd3 100644 --- a/drivers/input/mouse/hgpk.h +++ b/drivers/input/mouse/hgpk.h @@ -15,7 +15,7 @@ enum hgpk_model_t { struct hgpk_data { struct psmouse *psmouse; - int powered; + bool powered; int count, x_tally, y_tally; /* hardware workaround stuff */ unsigned long recalib_window; struct delayed_work recalib_wq; @@ -33,10 +33,10 @@ struct hgpk_data { dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg) #ifdef CONFIG_MOUSE_PS2_OLPC -int hgpk_detect(struct psmouse *psmouse, int set_properties); +int hgpk_detect(struct psmouse *psmouse, bool set_properties); int hgpk_init(struct psmouse *psmouse); #else -static inline int hgpk_detect(struct psmouse *psmouse, int set_properties) +static inline int hgpk_detect(struct psmouse *psmouse, bool set_properties) { return -ENODEV; } diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index dcd4236..5e63086 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -33,11 +33,11 @@ static int lifebook_set_serio_phys(const struct dmi_system_id *d) return 0; } -static unsigned char lifebook_use_6byte_proto; +static bool lifebook_use_6byte_proto; static int lifebook_set_6byte_proto(const struct dmi_system_id *d) { - lifebook_use_6byte_proto = 1; + lifebook_use_6byte_proto = true; return 0; } @@ -125,7 +125,7 @@ static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse) struct input_dev *dev1 = psmouse->dev; struct input_dev *dev2 = priv ? priv->dev2 : NULL; unsigned char *packet = psmouse->packet; - int relative_packet = packet[0] & 0x08; + bool relative_packet = packet[0] & 0x08; if (relative_packet || !lifebook_use_6byte_proto) { if (psmouse->pktcnt != 3) @@ -242,7 +242,7 @@ static void lifebook_disconnect(struct psmouse *psmouse) psmouse->private = NULL; } -int lifebook_detect(struct psmouse *psmouse, int set_properties) +int lifebook_detect(struct psmouse *psmouse, bool set_properties) { if (!dmi_check_system(lifebook_dmi_table)) return -1; diff --git a/drivers/input/mouse/lifebook.h b/drivers/input/mouse/lifebook.h index c1647cf..407cb22 100644 --- a/drivers/input/mouse/lifebook.h +++ b/drivers/input/mouse/lifebook.h @@ -12,10 +12,10 @@ #define _LIFEBOOK_H #ifdef CONFIG_MOUSE_PS2_LIFEBOOK -int lifebook_detect(struct psmouse *psmouse, int set_properties); +int lifebook_detect(struct psmouse *psmouse, bool set_properties); int lifebook_init(struct psmouse *psmouse); #else -inline int lifebook_detect(struct psmouse *psmouse, int set_properties) +inline int lifebook_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 390f1db..de745d7 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -130,14 +130,11 @@ static int ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned cha * 0 - disabled */ -static void ps2pp_set_smartscroll(struct psmouse *psmouse, unsigned int smartscroll) +static void ps2pp_set_smartscroll(struct psmouse *psmouse, bool smartscroll) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; - if (smartscroll > 1) - smartscroll = 1; - ps2pp_cmd(psmouse, param, 0x32); param[0] = 0; @@ -149,12 +146,14 @@ static void ps2pp_set_smartscroll(struct psmouse *psmouse, unsigned int smartscr ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); } -static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse, void *data, char *buf) +static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse, + void *data, char *buf) { - return sprintf(buf, "%d\n", psmouse->smartscroll ? 1 : 0); + return sprintf(buf, "%d\n", psmouse->smartscroll); } -static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) +static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data, + const char *buf, size_t count) { unsigned long value; @@ -261,29 +260,29 @@ static const struct ps2pp_info *get_model_info(unsigned char model) static void ps2pp_set_model_properties(struct psmouse *psmouse, const struct ps2pp_info *model_info, - int using_ps2pp) + bool using_ps2pp) { struct input_dev *input_dev = psmouse->dev; if (model_info->features & PS2PP_SIDE_BTN) - set_bit(BTN_SIDE, input_dev->keybit); + __set_bit(BTN_SIDE, input_dev->keybit); if (model_info->features & PS2PP_EXTRA_BTN) - set_bit(BTN_EXTRA, input_dev->keybit); + __set_bit(BTN_EXTRA, input_dev->keybit); if (model_info->features & PS2PP_TASK_BTN) - set_bit(BTN_TASK, input_dev->keybit); + __set_bit(BTN_TASK, input_dev->keybit); if (model_info->features & PS2PP_NAV_BTN) { - set_bit(BTN_FORWARD, input_dev->keybit); - set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_BACK, input_dev->keybit); } if (model_info->features & PS2PP_WHEEL) - set_bit(REL_WHEEL, input_dev->relbit); + __set_bit(REL_WHEEL, input_dev->relbit); if (model_info->features & PS2PP_HWHEEL) - set_bit(REL_HWHEEL, input_dev->relbit); + __set_bit(REL_HWHEEL, input_dev->relbit); switch (model_info->kind) { case PS2PP_KIND_WHEEL: @@ -321,13 +320,13 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, * that support it. */ -int ps2pp_init(struct psmouse *psmouse, int set_properties) +int ps2pp_init(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; unsigned char model, buttons; const struct ps2pp_info *model_info; - int use_ps2pp = 0; + bool use_ps2pp = false; int error; param[0] = 0; @@ -364,7 +363,7 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties) param[0] = 0; if (!ps2_command(ps2dev, param, 0x13d1) && param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14) { - use_ps2pp = 1; + use_ps2pp = true; } } else { @@ -376,8 +375,8 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties) if ((param[0] & 0x78) == 0x48 && (param[1] & 0xf3) == 0xc2 && (param[2] & 0x03) == ((param[1] >> 2) & 3)) { - ps2pp_set_smartscroll(psmouse, psmouse->smartscroll); - use_ps2pp = 1; + ps2pp_set_smartscroll(psmouse, false); + use_ps2pp = true; } } } @@ -406,7 +405,7 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties) } if (buttons < 3) - clear_bit(BTN_MIDDLE, psmouse->dev->keybit); + __clear_bit(BTN_MIDDLE, psmouse->dev->keybit); if (model_info) ps2pp_set_model_properties(psmouse, model_info, use_ps2pp); diff --git a/drivers/input/mouse/logips2pp.h b/drivers/input/mouse/logips2pp.h index 6e57125..0c186f0 100644 --- a/drivers/input/mouse/logips2pp.h +++ b/drivers/input/mouse/logips2pp.h @@ -12,9 +12,9 @@ #define _LOGIPS2PP_H #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP -int ps2pp_init(struct psmouse *psmouse, int set_properties); +int ps2pp_init(struct psmouse *psmouse, bool set_properties); #else -inline int ps2pp_init(struct psmouse *psmouse, int set_properties) +inline int ps2pp_init(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index df31888..690aed9 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -109,10 +109,10 @@ static struct workqueue_struct *kpsmoused_wq; struct psmouse_protocol { enum psmouse_type type; + bool maxproto; const char *name; const char *alias; - int maxproto; - int (*detect)(struct psmouse *, int); + int (*detect)(struct psmouse *, bool); int (*init)(struct psmouse *); }; @@ -217,7 +217,7 @@ void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work, static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) { psmouse->state = new_state; - psmouse->pktcnt = psmouse->out_of_sync = 0; + psmouse->pktcnt = psmouse->out_of_sync_cnt = 0; psmouse->ps2dev.flags = 0; psmouse->last = jiffies; } @@ -250,7 +250,7 @@ static int psmouse_handle_byte(struct psmouse *psmouse) if (psmouse->state == PSMOUSE_ACTIVATED) { printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n", psmouse->name, psmouse->phys, psmouse->pktcnt); - if (++psmouse->out_of_sync == psmouse->resetafter) { + if (++psmouse->out_of_sync_cnt == psmouse->resetafter) { __psmouse_set_state(psmouse, PSMOUSE_IGNORE); printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n"); serio_reconnect(psmouse->ps2dev.serio); @@ -262,8 +262,8 @@ static int psmouse_handle_byte(struct psmouse *psmouse) case PSMOUSE_FULL_PACKET: psmouse->pktcnt = 0; - if (psmouse->out_of_sync) { - psmouse->out_of_sync = 0; + if (psmouse->out_of_sync_cnt) { + psmouse->out_of_sync_cnt = 0; printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n", psmouse->name, psmouse->phys); } @@ -409,7 +409,7 @@ int psmouse_reset(struct psmouse *psmouse) /* * Genius NetMouse magic init. */ -static int genius_detect(struct psmouse *psmouse, int set_properties) +static int genius_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; @@ -425,9 +425,9 @@ static int genius_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev->keybit); - set_bit(BTN_SIDE, psmouse->dev->keybit); - set_bit(REL_WHEEL, psmouse->dev->relbit); + __set_bit(BTN_EXTRA, psmouse->dev->keybit); + __set_bit(BTN_SIDE, psmouse->dev->keybit); + __set_bit(REL_WHEEL, psmouse->dev->relbit); psmouse->vendor = "Genius"; psmouse->name = "Mouse"; @@ -440,7 +440,7 @@ static int genius_detect(struct psmouse *psmouse, int set_properties) /* * IntelliMouse magic init. */ -static int intellimouse_detect(struct psmouse *psmouse, int set_properties) +static int intellimouse_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; @@ -457,8 +457,8 @@ static int intellimouse_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev->keybit); - set_bit(REL_WHEEL, psmouse->dev->relbit); + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); + __set_bit(REL_WHEEL, psmouse->dev->relbit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Wheel Mouse"; @@ -471,7 +471,7 @@ static int intellimouse_detect(struct psmouse *psmouse, int set_properties) /* * Try IntelliMouse/Explorer magic init. */ -static int im_explorer_detect(struct psmouse *psmouse, int set_properties) +static int im_explorer_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; @@ -498,11 +498,11 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev->keybit); - set_bit(REL_WHEEL, psmouse->dev->relbit); - set_bit(REL_HWHEEL, psmouse->dev->relbit); - set_bit(BTN_SIDE, psmouse->dev->keybit); - set_bit(BTN_EXTRA, psmouse->dev->keybit); + __set_bit(BTN_MIDDLE, psmouse->dev->keybit); + __set_bit(REL_WHEEL, psmouse->dev->relbit); + __set_bit(REL_HWHEEL, psmouse->dev->relbit); + __set_bit(BTN_SIDE, psmouse->dev->keybit); + __set_bit(BTN_EXTRA, psmouse->dev->keybit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Explorer Mouse"; @@ -515,7 +515,7 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) /* * Kensington ThinkingMouse / ExpertMouse magic init. */ -static int thinking_detect(struct psmouse *psmouse, int set_properties) +static int thinking_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; @@ -536,7 +536,7 @@ static int thinking_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev->keybit); + __set_bit(BTN_EXTRA, psmouse->dev->keybit); psmouse->vendor = "Kensington"; psmouse->name = "ThinkingMouse"; @@ -548,7 +548,7 @@ static int thinking_detect(struct psmouse *psmouse, int set_properties) /* * Bare PS/2 protocol "detection". Always succeeds. */ -static int ps2bare_detect(struct psmouse *psmouse, int set_properties) +static int ps2bare_detect(struct psmouse *psmouse, bool set_properties) { if (set_properties) { if (!psmouse->vendor) psmouse->vendor = "Generic"; @@ -562,12 +562,12 @@ static int ps2bare_detect(struct psmouse *psmouse, int set_properties) * Cortron PS/2 protocol detection. There's no special way to detect it, so it * must be forced by sysfs protocol writing. */ -static int cortron_detect(struct psmouse *psmouse, int set_properties) +static int cortron_detect(struct psmouse *psmouse, bool set_properties) { if (set_properties) { psmouse->vendor = "Cortron"; psmouse->name = "PS/2 Trackball"; - set_bit(BTN_SIDE, psmouse->dev->keybit); + __set_bit(BTN_SIDE, psmouse->dev->keybit); } return 0; @@ -579,9 +579,9 @@ static int cortron_detect(struct psmouse *psmouse, int set_properties) */ static int psmouse_extensions(struct psmouse *psmouse, - unsigned int max_proto, int set_properties) + unsigned int max_proto, bool set_properties) { - int synaptics_hardware = 0; + bool synaptics_hardware = true; /* * We always check for lifebook because it does not disturb mouse @@ -608,7 +608,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * can reset it properly after probing for intellimouse. */ if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse, set_properties) == 0) { - synaptics_hardware = 1; + synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { if (!set_properties || synaptics_init(psmouse) == 0) @@ -733,7 +733,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .type = PSMOUSE_PS2, .name = "PS/2", .alias = "bare", - .maxproto = 1, + .maxproto = true, .detect = ps2bare_detect, }, #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP @@ -760,14 +760,14 @@ static const struct psmouse_protocol psmouse_protocols[] = { .type = PSMOUSE_IMPS, .name = "ImPS/2", .alias = "imps", - .maxproto = 1, + .maxproto = true, .detect = intellimouse_detect, }, { .type = PSMOUSE_IMEX, .name = "ImExPS/2", .alias = "exps", - .maxproto = 1, + .maxproto = true, .detect = im_explorer_detect, }, #ifdef CONFIG_MOUSE_PS2_SYNAPTICS @@ -848,7 +848,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .type = PSMOUSE_AUTO, .name = "auto", .alias = "any", - .maxproto = 1, + .maxproto = true, }, }; @@ -1014,7 +1014,7 @@ static void psmouse_resync(struct work_struct *work) container_of(work, struct psmouse, resync_work.work); struct serio *serio = psmouse->ps2dev.serio; psmouse_ret_t rc = PSMOUSE_GOOD_DATA; - int failed = 0, enabled = 0; + bool failed = false, enabled = false; int i; mutex_lock(&psmouse_mutex); @@ -1041,9 +1041,9 @@ static void psmouse_resync(struct work_struct *work) if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) { if (psmouse->num_resyncs < 3 || psmouse->acks_disable_command) - failed = 1; + failed = true; } else - psmouse->acks_disable_command = 1; + psmouse->acks_disable_command = true; /* * Poll the mouse. If it was reset the packet will be shorter than @@ -1054,7 +1054,7 @@ static void psmouse_resync(struct work_struct *work) */ if (!failed) { if (psmouse->poll(psmouse)) - failed = 1; + failed = true; else { psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); for (i = 0; i < psmouse->pktsize; i++) { @@ -1064,7 +1064,7 @@ static void psmouse_resync(struct work_struct *work) break; } if (rc != PSMOUSE_FULL_PACKET) - failed = 1; + failed = true; psmouse_set_state(psmouse, PSMOUSE_RESYNCING); } } @@ -1075,7 +1075,7 @@ static void psmouse_resync(struct work_struct *work) */ for (i = 0; i < 5; i++) { if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { - enabled = 1; + enabled = true; break; } msleep(200); @@ -1084,7 +1084,7 @@ static void psmouse_resync(struct work_struct *work) if (!enabled) { printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n", psmouse->ps2dev.serio->phys); - failed = 1; + failed = true; } if (failed) { @@ -1211,7 +1211,8 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse psmouse->type = proto->type; } else - psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, 1); + psmouse->type = psmouse_extensions(psmouse, + psmouse_max_proto, true); /* * If mouse's packet size is 3 there is no point in polling the @@ -1366,8 +1367,10 @@ static int psmouse_reconnect(struct serio *serio) if (psmouse->reconnect(psmouse)) goto out; } else if (psmouse_probe(psmouse) < 0 || - psmouse->type != psmouse_extensions(psmouse, psmouse_max_proto, 0)) + psmouse->type != psmouse_extensions(psmouse, + psmouse_max_proto, false)) { goto out; + } /* ok, the device type (and capabilities) match the old one, * we can continue using it, complete intialization @@ -1552,7 +1555,9 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co while (serio->child) { if (++retry > 3) { - printk(KERN_WARNING "psmouse: failed to destroy child port, protocol change aborted.\n"); + printk(KERN_WARNING + "psmouse: failed to destroy child port, " + "protocol change aborted.\n"); input_free_device(new_dev); return -EIO; } diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index cca1744..e053bdd 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -47,10 +47,10 @@ struct psmouse { unsigned char pktcnt; unsigned char pktsize; unsigned char type; - unsigned char acks_disable_command; + bool acks_disable_command; unsigned int model; unsigned long last; - unsigned long out_of_sync; + unsigned long out_of_sync_cnt; unsigned long num_resyncs; enum psmouse_state state; char devname[64]; @@ -60,7 +60,7 @@ struct psmouse { unsigned int resolution; unsigned int resetafter; unsigned int resync_time; - unsigned int smartscroll; /* Logitech only */ + bool smartscroll; /* Logitech only */ psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse); void (*set_rate)(struct psmouse *psmouse, unsigned int rate); @@ -108,7 +108,7 @@ struct psmouse_attribute { ssize_t (*show)(struct psmouse *psmouse, void *data, char *buf); ssize_t (*set)(struct psmouse *psmouse, void *data, const char *buf, size_t count); - int protect; + bool protect; }; #define to_psmouse_attr(a) container_of((a), struct psmouse_attribute, dattr) @@ -139,14 +139,14 @@ static struct psmouse_attribute psmouse_attr_##_name = { \ __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, _set, _protect) #define PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set) \ - __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, 1) + __PSMOUSE_DEFINE_ATTR(_name, _mode, _data, _show, _set, true) #define PSMOUSE_DEFINE_RO_ATTR(_name, _mode, _data, _show) \ static ssize_t _show(struct psmouse *, void *, char *); \ - __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, NULL, 1) + __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, _show, NULL, true) #define PSMOUSE_DEFINE_WO_ATTR(_name, _mode, _data, _set) \ static ssize_t _set(struct psmouse *, void *, const char *, size_t); \ - __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, 1) + __PSMOUSE_DEFINE_ATTR_VAR(_name, _mode, _data, NULL, _set, true) #endif /* _PSMOUSE_H */ diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 97b1e72..84e2fc0 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -756,7 +756,7 @@ static int fsp_activate_protocol(struct psmouse *psmouse) return 0; } -int fsp_detect(struct psmouse *psmouse, int set_properties) +int fsp_detect(struct psmouse *psmouse, bool set_properties) { int id; diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index 083559c..ed1395a 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -80,10 +80,10 @@ struct fsp_data { }; #ifdef CONFIG_MOUSE_PS2_SENTELIC -extern int fsp_detect(struct psmouse *psmouse, int set_properties); +extern int fsp_detect(struct psmouse *psmouse, bool set_properties); extern int fsp_init(struct psmouse *psmouse); #else -inline int fsp_detect(struct psmouse *psmouse, int set_properties) +inline int fsp_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 19984bf..b66ff1a 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -60,7 +60,7 @@ static int synaptics_mode_cmd(struct psmouse *psmouse, unsigned char mode) return 0; } -int synaptics_detect(struct psmouse *psmouse, int set_properties) +int synaptics_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; @@ -556,38 +556,38 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) { int i; - set_bit(EV_ABS, dev->evbit); + __set_bit(EV_ABS, dev->evbit); input_set_abs_params(dev, ABS_X, XMIN_NOMINAL, XMAX_NOMINAL, 0, 0); input_set_abs_params(dev, ABS_Y, YMIN_NOMINAL, YMAX_NOMINAL, 0, 0); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); - set_bit(ABS_TOOL_WIDTH, dev->absbit); + __set_bit(ABS_TOOL_WIDTH, dev->absbit); - set_bit(EV_KEY, dev->evbit); - set_bit(BTN_TOUCH, dev->keybit); - set_bit(BTN_TOOL_FINGER, dev->keybit); - set_bit(BTN_LEFT, dev->keybit); - set_bit(BTN_RIGHT, dev->keybit); + __set_bit(EV_KEY, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); if (SYN_CAP_MULTIFINGER(priv->capabilities)) { - set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); - set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); } if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - set_bit(BTN_MIDDLE, dev->keybit); + __set_bit(BTN_MIDDLE, dev->keybit); if (SYN_CAP_FOUR_BUTTON(priv->capabilities) || SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { - set_bit(BTN_FORWARD, dev->keybit); - set_bit(BTN_BACK, dev->keybit); + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); } for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) - set_bit(BTN_0 + i, dev->keybit); + __set_bit(BTN_0 + i, dev->keybit); - clear_bit(EV_REL, dev->evbit); - clear_bit(REL_X, dev->relbit); - clear_bit(REL_Y, dev->relbit); + __clear_bit(EV_REL, dev->evbit); + __clear_bit(REL_X, dev->relbit); + __clear_bit(REL_Y, dev->relbit); dev->absres[ABS_X] = priv->x_res; dev->absres[ABS_Y] = priv->y_res; diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 3023821..871f6fe 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -105,7 +105,7 @@ struct synaptics_data { int scroll; }; -int synaptics_detect(struct psmouse *psmouse, int set_properties); +int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c index 3fadb2a..0308a0f 100644 --- a/drivers/input/mouse/touchkit_ps2.c +++ b/drivers/input/mouse/touchkit_ps2.c @@ -67,7 +67,7 @@ static psmouse_ret_t touchkit_ps2_process_byte(struct psmouse *psmouse) return PSMOUSE_FULL_PACKET; } -int touchkit_ps2_detect(struct psmouse *psmouse, int set_properties) +int touchkit_ps2_detect(struct psmouse *psmouse, bool set_properties) { struct input_dev *dev = psmouse->dev; unsigned char param[3]; @@ -86,7 +86,7 @@ int touchkit_ps2_detect(struct psmouse *psmouse, int set_properties) if (set_properties) { dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOUCH, dev->keybit); input_set_abs_params(dev, ABS_X, 0, TOUCHKIT_MAX_XC, 0, 0); input_set_abs_params(dev, ABS_Y, 0, TOUCHKIT_MAX_YC, 0, 0); diff --git a/drivers/input/mouse/touchkit_ps2.h b/drivers/input/mouse/touchkit_ps2.h index 8a0dd35..2efe9ea 100644 --- a/drivers/input/mouse/touchkit_ps2.h +++ b/drivers/input/mouse/touchkit_ps2.h @@ -13,10 +13,10 @@ #define _TOUCHKIT_PS2_H #ifdef CONFIG_MOUSE_PS2_TOUCHKIT -int touchkit_ps2_detect(struct psmouse *psmouse, int set_properties); +int touchkit_ps2_detect(struct psmouse *psmouse, bool set_properties); #else static inline int touchkit_ps2_detect(struct psmouse *psmouse, - int set_properties) + bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index e68c814..e354362 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -282,7 +282,7 @@ static int trackpoint_reconnect(struct psmouse *psmouse) return 0; } -int trackpoint_detect(struct psmouse *psmouse, int set_properties) +int trackpoint_detect(struct psmouse *psmouse, bool set_properties) { struct trackpoint_data *priv; struct ps2dev *ps2dev = &psmouse->ps2dev; diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h index c10a6e7..e558a70 100644 --- a/drivers/input/mouse/trackpoint.h +++ b/drivers/input/mouse/trackpoint.h @@ -143,9 +143,9 @@ struct trackpoint_data }; #ifdef CONFIG_MOUSE_PS2_TRACKPOINT -int trackpoint_detect(struct psmouse *psmouse, int set_properties); +int trackpoint_detect(struct psmouse *psmouse, bool set_properties); #else -inline int trackpoint_detect(struct psmouse *psmouse, int set_properties) +inline int trackpoint_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } -- cgit v0.10.2 From 85927b0d5240dd2f48f1debf2797bd28ed4d112b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 9 Sep 2009 19:17:24 -0700 Subject: Input: wistron_btns - add keymap for AOpen 1557 This one does not have anything useful in DMI either so again we need to use: force=1 keymap=aopen1557 Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index ebb08cf..11fd038 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -611,10 +611,24 @@ static struct key_entry keymap_wistron_generic[] __initdata = { { KE_END, 0 } }; +static struct key_entry keymap_aopen_1557[] __initdata = { + { KE_KEY, 0x01, {KEY_HELP} }, + { KE_KEY, 0x11, {KEY_PROG1} }, + { KE_KEY, 0x12, {KEY_PROG2} }, + { KE_WIFI, 0x30 }, + { KE_KEY, 0x22, {KEY_REWIND} }, + { KE_KEY, 0x23, {KEY_FORWARD} }, + { KE_KEY, 0x24, {KEY_PLAYPAUSE} }, + { KE_KEY, 0x25, {KEY_STOPCD} }, + { KE_KEY, 0x31, {KEY_MAIL} }, + { KE_KEY, 0x36, {KEY_WWW} }, + { KE_END, 0 } +}; + static struct key_entry keymap_prestigio[] __initdata = { { KE_KEY, 0x11, {KEY_PROG1} }, { KE_KEY, 0x12, {KEY_PROG2} }, - { KE_WIFI, 0x30 }, + { KE_WIFI, 0x30 }, { KE_KEY, 0x22, {KEY_REWIND} }, { KE_KEY, 0x23, {KEY_FORWARD} }, { KE_KEY, 0x24, {KEY_PLAYPAUSE} }, @@ -985,6 +999,8 @@ static int __init select_keymap(void) if (keymap_name != NULL) { if (strcmp (keymap_name, "1557/MS2141") == 0) keymap = keymap_wistron_ms2141; + else if (strcmp (keymap_name, "aopen1557") == 0) + keymap = keymap_aopen_1557; else if (strcmp (keymap_name, "prestigio") == 0) keymap = keymap_prestigio; else if (strcmp (keymap_name, "generic") == 0) -- cgit v0.10.2 From 9de48cc300fb10f7d9faa978670becf5e352462a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 13 Sep 2009 09:10:11 -0700 Subject: Input: bcm5974 - silence uninitialized variables warnings Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2d8fc0b..0d1d334 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -317,7 +317,7 @@ static int report_tp_state(struct bcm5974 *dev, int size) const struct tp_finger *f; struct input_dev *input = dev->input; int raw_p, raw_w, raw_x, raw_y, raw_n; - int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; + int ptest, origin, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) @@ -345,21 +345,22 @@ static int report_tp_state(struct bcm5974 *dev, int size) /* set the integrated button if applicable */ if (c->tp_type == TYPE2) ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); - } - /* while tracking finger still valid, count all fingers */ - if (ptest > PRESSURE_LOW && origin) { - abs_p = ptest; - abs_w = int2bound(&c->w, raw_w); - abs_x = int2bound(&c->x, raw_x - c->x.devmin); - abs_y = int2bound(&c->y, c->y.devmax - raw_y); - while (raw_n--) { - ptest = int2bound(&c->p, raw2int(f->force_major)); - if (ptest > PRESSURE_LOW) - nmax++; - if (ptest > PRESSURE_HIGH) - nmin++; - f++; + /* while tracking finger still valid, count all fingers */ + if (ptest > PRESSURE_LOW && origin) { + abs_p = ptest; + abs_w = int2bound(&c->w, raw_w); + abs_x = int2bound(&c->x, raw_x - c->x.devmin); + abs_y = int2bound(&c->y, c->y.devmax - raw_y); + while (raw_n--) { + ptest = int2bound(&c->p, + raw2int(f->force_major)); + if (ptest > PRESSURE_LOW) + nmax++; + if (ptest > PRESSURE_HIGH) + nmin++; + f++; + } } } -- cgit v0.10.2