From 26447231fe8cb695369a392d8e018c035455ac8c Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 15 Dec 2015 13:36:35 +0000 Subject: arm64: dts: prepare foundation-v8.dts to cope with GICv3 To prepare the ARM foundation model to support GICv3, we adjust the #address-cells property of the current GICv2 node to be compatible with the two cells required for GICv3 later. Signed-off-by: Andre Przywara Acked-by: Marc Zyngier Signed-off-by: Sudeep Holla diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 4eac8dc..3c5595d 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -75,7 +75,7 @@ gic: interrupt-controller@2c001000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <0>; + #address-cells = <2>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, <0x0 0x2c002000 0 0x1000>, @@ -116,49 +116,49 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; + interrupt-map = <0 0 0 &gic 0 0 0 0 4>, + <0 0 1 &gic 0 0 0 1 4>, + <0 0 2 &gic 0 0 0 2 4>, + <0 0 3 &gic 0 0 0 3 4>, + <0 0 4 &gic 0 0 0 4 4>, + <0 0 5 &gic 0 0 0 5 4>, + <0 0 6 &gic 0 0 0 6 4>, + <0 0 7 &gic 0 0 0 7 4>, + <0 0 8 &gic 0 0 0 8 4>, + <0 0 9 &gic 0 0 0 9 4>, + <0 0 10 &gic 0 0 0 10 4>, + <0 0 11 &gic 0 0 0 11 4>, + <0 0 12 &gic 0 0 0 12 4>, + <0 0 13 &gic 0 0 0 13 4>, + <0 0 14 &gic 0 0 0 14 4>, + <0 0 15 &gic 0 0 0 15 4>, + <0 0 16 &gic 0 0 0 16 4>, + <0 0 17 &gic 0 0 0 17 4>, + <0 0 18 &gic 0 0 0 18 4>, + <0 0 19 &gic 0 0 0 19 4>, + <0 0 20 &gic 0 0 0 20 4>, + <0 0 21 &gic 0 0 0 21 4>, + <0 0 22 &gic 0 0 0 22 4>, + <0 0 23 &gic 0 0 0 23 4>, + <0 0 24 &gic 0 0 0 24 4>, + <0 0 25 &gic 0 0 0 25 4>, + <0 0 26 &gic 0 0 0 26 4>, + <0 0 27 &gic 0 0 0 27 4>, + <0 0 28 &gic 0 0 0 28 4>, + <0 0 29 &gic 0 0 0 29 4>, + <0 0 30 &gic 0 0 0 30 4>, + <0 0 31 &gic 0 0 0 31 4>, + <0 0 32 &gic 0 0 0 32 4>, + <0 0 33 &gic 0 0 0 33 4>, + <0 0 34 &gic 0 0 0 34 4>, + <0 0 35 &gic 0 0 0 35 4>, + <0 0 36 &gic 0 0 0 36 4>, + <0 0 37 &gic 0 0 0 37 4>, + <0 0 38 &gic 0 0 0 38 4>, + <0 0 39 &gic 0 0 0 39 4>, + <0 0 40 &gic 0 0 0 40 4>, + <0 0 41 &gic 0 0 0 41 4>, + <0 0 42 &gic 0 0 0 42 4>; ethernet@2,02000000 { compatible = "smsc,lan91c111"; -- cgit v0.10.2 From e6b512285a46c71e056e15985140d8a078937b7d Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 15 Dec 2015 13:36:36 +0000 Subject: arm64: dts: Foundation model: increase GICC region to allow EOImode=1 The Foundation model GIC mapping is wrong, as the GICC region should be 8kB instead of 4kB (the model implements the GICv2 architecture). This defect prevents the driver from switching to EOImode==1. Signed-off-by: Andre Przywara Reviewed-by: Marc Zyngier Signed-off-by: Sudeep Holla diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 3c5595d..57ad9fe 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -78,7 +78,7 @@ #address-cells = <2>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; -- cgit v0.10.2 From d11a8979667818d44f25ebe4efeed258d9f770e8 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 15 Dec 2015 13:36:37 +0000 Subject: arm64: dts: split Foundation model dts to put the GIC separately The ARMv8 Foundation model can be run with a GICv2 or a GICv3. To prepare for the GICv3 version of the .dts without code duplication, move most of the nodes of the existing DT (except the GIC) into an include file and just keep that include statement and the GIC node in the current foundation-v8.dts. Signed-off-by: Andre Przywara Acked-by: Marc Zyngier Signed-off-by: Sudeep Holla diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 57ad9fe..7116807 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -1,77 +1,12 @@ /* * ARM Ltd. * - * ARMv8 Foundation model DTS + * ARMv8 Foundation model DTS (GICv2 configuration) */ -/dts-v1/; - -/memreserve/ 0x80000000 0x00010000; +#include "foundation-v8.dtsi" / { - model = "Foundation-v8A"; - compatible = "arm,foundation-aarch64", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - next-level-cache = <&L2_0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - next-level-cache = <&L2_0>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - next-level-cache = <&L2_0>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - next-level-cache = <&L2_0>; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>, - <0x00000008 0x80000000 0 0x80000000>; - }; - gic: interrupt-controller@2c001000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -83,158 +18,4 @@ <0x0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - }; - - smb { - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - arm,v2m-memory-map = "rs1"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 0 0 4>, - <0 0 1 &gic 0 0 0 1 4>, - <0 0 2 &gic 0 0 0 2 4>, - <0 0 3 &gic 0 0 0 3 4>, - <0 0 4 &gic 0 0 0 4 4>, - <0 0 5 &gic 0 0 0 5 4>, - <0 0 6 &gic 0 0 0 6 4>, - <0 0 7 &gic 0 0 0 7 4>, - <0 0 8 &gic 0 0 0 8 4>, - <0 0 9 &gic 0 0 0 9 4>, - <0 0 10 &gic 0 0 0 10 4>, - <0 0 11 &gic 0 0 0 11 4>, - <0 0 12 &gic 0 0 0 12 4>, - <0 0 13 &gic 0 0 0 13 4>, - <0 0 14 &gic 0 0 0 14 4>, - <0 0 15 &gic 0 0 0 15 4>, - <0 0 16 &gic 0 0 0 16 4>, - <0 0 17 &gic 0 0 0 17 4>, - <0 0 18 &gic 0 0 0 18 4>, - <0 0 19 &gic 0 0 0 19 4>, - <0 0 20 &gic 0 0 0 20 4>, - <0 0 21 &gic 0 0 0 21 4>, - <0 0 22 &gic 0 0 0 22 4>, - <0 0 23 &gic 0 0 0 23 4>, - <0 0 24 &gic 0 0 0 24 4>, - <0 0 25 &gic 0 0 0 25 4>, - <0 0 26 &gic 0 0 0 26 4>, - <0 0 27 &gic 0 0 0 27 4>, - <0 0 28 &gic 0 0 0 28 4>, - <0 0 29 &gic 0 0 0 29 4>, - <0 0 30 &gic 0 0 0 30 4>, - <0 0 31 &gic 0 0 0 31 4>, - <0 0 32 &gic 0 0 0 32 4>, - <0 0 33 &gic 0 0 0 33 4>, - <0 0 34 &gic 0 0 0 34 4>, - <0 0 35 &gic 0 0 0 35 4>, - <0 0 36 &gic 0 0 0 36 4>, - <0 0 37 &gic 0 0 0 37 4>, - <0 0 38 &gic 0 0 0 38 4>, - <0 0 39 &gic 0 0 0 39 4>, - <0 0 40 &gic 0 0 0 40 4>, - <0 0 41 &gic 0 0 0 41 4>, - <0 0 42 &gic 0 0 0 42 4>; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@010000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - }; - - v2m_serial0: uart@090000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@0a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@0b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@0c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - virtio_block@0130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi new file mode 100644 index 0000000..9314f39 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -0,0 +1,228 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "Foundation-v8A"; + compatible = "arm,foundation-aarch64", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 0 0 4>, + <0 0 1 &gic 0 0 0 1 4>, + <0 0 2 &gic 0 0 0 2 4>, + <0 0 3 &gic 0 0 0 3 4>, + <0 0 4 &gic 0 0 0 4 4>, + <0 0 5 &gic 0 0 0 5 4>, + <0 0 6 &gic 0 0 0 6 4>, + <0 0 7 &gic 0 0 0 7 4>, + <0 0 8 &gic 0 0 0 8 4>, + <0 0 9 &gic 0 0 0 9 4>, + <0 0 10 &gic 0 0 0 10 4>, + <0 0 11 &gic 0 0 0 11 4>, + <0 0 12 &gic 0 0 0 12 4>, + <0 0 13 &gic 0 0 0 13 4>, + <0 0 14 &gic 0 0 0 14 4>, + <0 0 15 &gic 0 0 0 15 4>, + <0 0 16 &gic 0 0 0 16 4>, + <0 0 17 &gic 0 0 0 17 4>, + <0 0 18 &gic 0 0 0 18 4>, + <0 0 19 &gic 0 0 0 19 4>, + <0 0 20 &gic 0 0 0 20 4>, + <0 0 21 &gic 0 0 0 21 4>, + <0 0 22 &gic 0 0 0 22 4>, + <0 0 23 &gic 0 0 0 23 4>, + <0 0 24 &gic 0 0 0 24 4>, + <0 0 25 &gic 0 0 0 25 4>, + <0 0 26 &gic 0 0 0 26 4>, + <0 0 27 &gic 0 0 0 27 4>, + <0 0 28 &gic 0 0 0 28 4>, + <0 0 29 &gic 0 0 0 29 4>, + <0 0 30 &gic 0 0 0 30 4>, + <0 0 31 &gic 0 0 0 31 4>, + <0 0 32 &gic 0 0 0 32 4>, + <0 0 33 &gic 0 0 0 33 4>, + <0 0 34 &gic 0 0 0 34 4>, + <0 0 35 &gic 0 0 0 35 4>, + <0 0 36 &gic 0 0 0 36 4>, + <0 0 37 &gic 0 0 0 37 4>, + <0 0 38 &gic 0 0 0 38 4>, + <0 0 39 &gic 0 0 0 39 4>, + <0 0 40 &gic 0 0 0 40 4>, + <0 0 41 &gic 0 0 0 41 4>, + <0 0 42 &gic 0 0 0 42 4>; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + }; +}; -- cgit v0.10.2 From 6ba29e916e15c11341b0e043ed643555143e9e64 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 15 Dec 2015 13:36:38 +0000 Subject: arm64: dts: add .dts for GICv3 Foundation model The ARMv8 Foundation model sports a command line parameter to use a GICv3 emulation instead of the default GICv2 interrupt controller. Add a new .dts file which reuses most of the definitions of the existing model while just adding the required properties for the GICv3 node. This allows the public Foundation model to run with a GICv3. Signed-off-by: Andre Przywara Signed-off-by: Sudeep Holla diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index bb3c072..46d342d 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts new file mode 100644 index 0000000..35588df --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts @@ -0,0 +1,30 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3 configuration) + */ + +#include "foundation-v8.dtsi" + +/ { + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0x0 0x10000>, + <0x0 0x2f100000 0x0 0x200000>, + <0x0 0x2c000000 0x0 0x2000>, + <0x0 0x2c010000 0x0 0x2000>, + <0x0 0x2c02f000 0x0 0x2000>; + interrupts = <1 9 4>; + + its: its@2f020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x2f020000 0x0 0x20000>; + }; + }; +}; -- cgit v0.10.2 From 36582c60de2789feb91b63ff4ed8ec9381fa4d1e Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 11 Jan 2016 17:16:08 +0000 Subject: arm64: dts: move juno pcie-controller to base file The PCIe controller is found on all Juno SoC version. However it's not functional on R0 due to some hardware bug. In preparation to add Juno R2 support, this patch moves the pcie-controller defination to base DTS file. It's marked as disabled by default and is enabled for Juno R1 explicitly. Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158e..b501721 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -75,6 +75,28 @@ }; }; + pcie_ctlr: pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + status = "disabled"; + }; + scpi { compatible = "arm,scpi"; mboxes = <&mailbox 1>; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 8826f83..d95d9e7 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -172,29 +172,12 @@ }; #include "juno-base.dtsi" - - pcie-controller@40000000 { - compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; - device_type = "pci"; - reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ - bus-range = <0 255>; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - dma-coherent; - ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, - <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, - <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, - <0 0 0 2 &gic 0 0 0 137 4>, - <0 0 0 3 &gic 0 0 0 138 4>, - <0 0 0 4 &gic 0 0 0 139 4>; - msi-parent = <&v2m_0>; - }; }; &memtimer { status = "okay"; }; + +&pcie_ctlr { + status = "okay"; +}; -- cgit v0.10.2 From e6d7f6dc857f6e8efafc68217a598bd5d532034f Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 22 Dec 2015 17:45:29 +0000 Subject: arm64: dts: Add support for Juno r2 board Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by Cortex A72 cores. Acked-by: Rob Herring Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 1a70997..70601a5 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -180,6 +180,7 @@ described under the RS1 memory mapping. Required properties (in root node): compatible = "arm,juno"; /* For Juno r0 board */ compatible = "arm,juno-r1"; /* For Juno r1 board */ + compatible = "arm,juno-r2"; /* For Juno r2 board */ Required nodes: The description for the board must include: diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 46d342d..75cc2aa 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts new file mode 100644 index 0000000..88ecd61 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -0,0 +1,183 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include + +/ { + model = "ARM Juno development board (r2)"; + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + + A72_0: cpu@0 { + compatible = "arm,cortex-a72","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A72_1: cpu@1 { + compatible = "arm,cortex-a72","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + A72_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = , + ; + interrupt-affinity = <&A72_0>, + <&A72_1>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" +}; + +&memtimer { + status = "okay"; +}; + +&pcie_ctlr { + status = "okay"; +}; -- cgit v0.10.2 From a6356f930233ff3b240b45069e7665ca357e739e Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Thu, 12 Dec 2013 18:23:35 +0000 Subject: Documentation: drm: Add DT bindings for ARM HDLCD Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Acked-by: Rob Herring Signed-off-by: Liviu Dudau diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt new file mode 100644 index 0000000..78bc242 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,hdlcd.txt @@ -0,0 +1,79 @@ +ARM HDLCD + +This is a display controller found on several development platforms produced +by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB +streamer that reads the data from a framebuffer and sends it to a single +digital encoder (DVI or HDMI). + +Required properties: + - compatible: "arm,hdlcd" + - reg: Physical base address and length of the controller's registers. + - interrupts: One interrupt used by the display controller to notify the + interrupt controller when any of the interrupt sources programmed in + the interrupt mask register have activated. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For HDLCD it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The HDLCD connection to an encoder chip. The connection is modeled + using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be + used for the framebuffer; if not present, the framebuffer may be located + anywhere in memory. + + +Example: + +/ { + ... + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = ; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint@0 { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c@7ffa0000 { + .... + hdmi-transmitter@70 { + compatible = "....."; + reg = <0x70>; + port@0 { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + + hdmi_enc_output: endpoint { + remote-endpoint = <&hdmi_1_port>; + }; + }; + }; + + }; + + hdmi1: connector@1 { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi_1_port: endpoint { + remote-endpoint = <&hdmi_enc_output>; + }; + }; + }; + + ... +}; -- cgit v0.10.2 From 9fd9288ed0899f9e318a97d73e777d6d3357265e Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Thu, 2 Apr 2015 19:50:29 +0100 Subject: arm64: dts: Add HDLCD support on Juno platforms ARM's Juno platforms have two HDLCD controllers, each linked to an NXP TDA19988 HDMI transmitter that provides output encoding. Add them to the device tree. Acked-by: Sudeep Holla Signed-off-by: Liviu Dudau diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index b501721..31d5d44 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -114,8 +114,8 @@ scpi_clk: scpi_clocks@3 { compatible = "arm,scpi-variable-clocks"; #clock-cells = <1>; - clock-indices = <3>, <4>; - clock-output-names = "pxlclk0", "pxlclk1"; + clock-indices = <3>; + clock-output-names = "pxlclk"; }; }; @@ -145,6 +145,34 @@ clock-names = "apb_pclk"; }; + hdlcd@7ff50000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff50000 0 0x1000>; + interrupts = ; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd1_output: endpoint@0 { + remote-endpoint = <&tda998x_1_input>; + }; + }; + }; + + hdlcd@7ff60000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff60000 0 0x1000>; + interrupts = ; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd0_output: endpoint@0 { + remote-endpoint = <&tda998x_0_input>; + }; + }; + }; + soc_uart0: uart@7ff80000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x7ff80000 0x0 0x1000>; @@ -163,14 +191,24 @@ i2c-sda-hold-time-ns = <500>; clocks = <&soc_smc50mhz>; - dvi0: dvi-transmitter@70 { + hdmi-transmitter@70 { compatible = "nxp,tda998x"; reg = <0x70>; + port { + tda998x_0_input: endpoint@0 { + remote-endpoint = <&hdlcd0_output>; + }; + }; }; - dvi1: dvi-transmitter@71 { + hdmi-transmitter@71 { compatible = "nxp,tda998x"; reg = <0x71>; + port { + tda998x_1_input: endpoint@0 { + remote-endpoint = <&hdlcd1_output>; + }; + }; }; }; -- cgit v0.10.2