From bcfed2a8a61a0f6ee7769f5093a8279a9e50c526 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 6 Jun 2013 17:38:11 +0200 Subject: ARM: shmobile: armadillo800eva: remove left-overs A comment and a #define in board-armadillo800eva.c have been left over after recent changes and are no longer relevant or needed, remove them. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f67..66cfd56 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = { }; /* SDHI0 */ -/* - * FIXME - * - * It use polling mode here, since - * CD (= Card Detect) pin is not connected to SDHI0_CD. - * We can use IRQ31 as card detect irq, - * but it needs chattering removal operation - */ -#define IRQ31 irq_pin(31) static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, -- cgit v0.10.2 From 8b770e3c9824c98eafe67950ad6e41e09ec9c98a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Jul 2013 21:13:24 +0200 Subject: backlight: Add GPIO-based backlight driver The GPIO backlight driver controls the backlight in on/off mode through a single GPIO. Signed-off-by: Laurent Pinchart Acked-by: Jingoo Han Signed-off-by: Simon Horman diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index d5ab658..5ab6423 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -425,6 +425,13 @@ config BACKLIGHT_AS3711 If you have an Austrian Microsystems AS3711 say Y to enable the backlight driver. +config BACKLIGHT_GPIO + tristate "Generic GPIO based Backlight Driver" + depends on GPIOLIB + help + If you have a LCD backlight adjustable by GPIO, say Y to enable + this driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 92711fe..65698a8 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o +obj-$(CONFIG_BACKLIGHT_GPIO) += gpio_backlight.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c new file mode 100644 index 0000000..5fa217f --- /dev/null +++ b/drivers/video/backlight/gpio_backlight.c @@ -0,0 +1,133 @@ +/* + * gpio_backlight.c - Simple GPIO-controlled backlight + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct gpio_backlight { + struct device *dev; + struct device *fbdev; + + int gpio; + int active; +}; + +static int gpio_backlight_update_status(struct backlight_device *bl) +{ + struct gpio_backlight *gbl = bl_get_data(bl); + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK || + bl->props.fb_blank != FB_BLANK_UNBLANK || + bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) + brightness = 0; + + gpio_set_value(gbl->gpio, brightness ? gbl->active : !gbl->active); + + return 0; +} + +static int gpio_backlight_get_brightness(struct backlight_device *bl) +{ + return bl->props.brightness; +} + +static int gpio_backlight_check_fb(struct backlight_device *bl, + struct fb_info *info) +{ + struct gpio_backlight *gbl = bl_get_data(bl); + + return gbl->fbdev == NULL || gbl->fbdev == info->dev; +} + +static const struct backlight_ops gpio_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = gpio_backlight_update_status, + .get_brightness = gpio_backlight_get_brightness, + .check_fb = gpio_backlight_check_fb, +}; + +static int gpio_backlight_probe(struct platform_device *pdev) +{ + struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data; + struct backlight_properties props; + struct backlight_device *bl; + struct gpio_backlight *gbl; + int ret; + + if (!pdata) { + dev_err(&pdev->dev, "failed to find platform data\n"); + return -ENODEV; + } + + gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL); + if (gbl == NULL) + return -ENOMEM; + + gbl->dev = &pdev->dev; + gbl->fbdev = pdata->fbdev; + gbl->gpio = pdata->gpio; + gbl->active = pdata->active_low ? 0 : 1; + + ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT | + (gbl->active ? GPIOF_INIT_LOW + : GPIOF_INIT_HIGH), + pdata->name); + if (ret < 0) { + dev_err(&pdev->dev, "unable to request GPIO\n"); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 1; + bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl, + &gpio_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = pdata->def_value; + backlight_update_status(bl); + + platform_set_drvdata(pdev, bl); + return 0; +} + +static int gpio_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + + backlight_device_unregister(bl); + return 0; +} + +static struct platform_driver gpio_backlight_driver = { + .driver = { + .name = "gpio-backlight", + .owner = THIS_MODULE, + }, + .probe = gpio_backlight_probe, + .remove = gpio_backlight_remove, +}; + +module_platform_driver(gpio_backlight_driver); + +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_DESCRIPTION("GPIO-based Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-backlight"); diff --git a/include/linux/platform_data/gpio_backlight.h b/include/linux/platform_data/gpio_backlight.h new file mode 100644 index 0000000..5ae0d9c --- /dev/null +++ b/include/linux/platform_data/gpio_backlight.h @@ -0,0 +1,21 @@ +/* + * gpio_backlight.h - Simple GPIO-controlled backlight + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __GPIO_BACKLIGHT_H__ +#define __GPIO_BACKLIGHT_H__ + +struct device; + +struct gpio_backlight_platform_data { + struct device *fbdev; + int gpio; + int def_value; + bool active_low; + const char *name; +}; + +#endif -- cgit v0.10.2 From 82e5c40d88f928afffe7bd4027719d3184433908 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Jul 2013 21:13:25 +0200 Subject: backlight: Add Sanyo LV5207LP backlight driver The LV5207LP is a multi-purpose 7 LEDs driver for the mobile market. Only the main LED is supported by this driver. Signed-off-by: Laurent Pinchart Acked-by: Jingoo Han Signed-off-by: Simon Horman diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 5ab6423..b304e07 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -432,6 +432,12 @@ config BACKLIGHT_GPIO If you have a LCD backlight adjustable by GPIO, say Y to enable this driver. +config BACKLIGHT_LV5207LP + tristate "Sanyo LV5207LP Backlight" + depends on I2C + help + If you have a Sanyo LV5207LP say Y to enable the backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 65698a8..4e5e8116 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o obj-$(CONFIG_BACKLIGHT_LP8788) += lp8788_bl.o +obj-$(CONFIG_BACKLIGHT_LV5207LP) += lv5207lp.o obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o diff --git a/drivers/video/backlight/lv5207lp.c b/drivers/video/backlight/lv5207lp.c new file mode 100644 index 0000000..498fd73 --- /dev/null +++ b/drivers/video/backlight/lv5207lp.c @@ -0,0 +1,171 @@ +/* + * Sanyo LV5207LP LED Driver + * + * Copyright (C) 2013 Ideas on board SPRL + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define LV5207LP_CTRL1 0x00 +#define LV5207LP_CPSW (1 << 7) +#define LV5207LP_SCTEN (1 << 6) +#define LV5207LP_C10 (1 << 5) +#define LV5207LP_CKSW (1 << 4) +#define LV5207LP_RSW (1 << 3) +#define LV5207LP_GSW (1 << 2) +#define LV5207LP_BSW (1 << 1) +#define LV5207LP_CTRL2 0x01 +#define LV5207LP_MSW (1 << 7) +#define LV5207LP_MLED4 (1 << 6) +#define LV5207LP_RED 0x02 +#define LV5207LP_GREEN 0x03 +#define LV5207LP_BLUE 0x04 + +#define LV5207LP_MAX_BRIGHTNESS 32 + +struct lv5207lp { + struct i2c_client *client; + struct backlight_device *backlight; + struct lv5207lp_platform_data *pdata; +}; + +static int lv5207lp_write(struct lv5207lp *lv, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(lv->client, reg, data); +} + +static int lv5207lp_backlight_update_status(struct backlight_device *backlight) +{ + struct lv5207lp *lv = bl_get_data(backlight); + int brightness = backlight->props.brightness; + + if (backlight->props.power != FB_BLANK_UNBLANK || + backlight->props.fb_blank != FB_BLANK_UNBLANK || + backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) + brightness = 0; + + if (brightness) { + lv5207lp_write(lv, LV5207LP_CTRL1, + LV5207LP_CPSW | LV5207LP_C10 | LV5207LP_CKSW); + lv5207lp_write(lv, LV5207LP_CTRL2, + LV5207LP_MSW | LV5207LP_MLED4 | + (brightness - 1)); + } else { + lv5207lp_write(lv, LV5207LP_CTRL1, 0); + lv5207lp_write(lv, LV5207LP_CTRL2, 0); + } + + return 0; +} + +static int lv5207lp_backlight_get_brightness(struct backlight_device *backlight) +{ + return backlight->props.brightness; +} + +static int lv5207lp_backlight_check_fb(struct backlight_device *backlight, + struct fb_info *info) +{ + struct lv5207lp *lv = bl_get_data(backlight); + + return lv->pdata->fbdev == NULL || lv->pdata->fbdev == info->dev; +} + +static const struct backlight_ops lv5207lp_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lv5207lp_backlight_update_status, + .get_brightness = lv5207lp_backlight_get_brightness, + .check_fb = lv5207lp_backlight_check_fb, +}; + +static int lv5207lp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lv5207lp_platform_data *pdata = client->dev.platform_data; + struct backlight_device *backlight; + struct backlight_properties props; + struct lv5207lp *lv; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data supplied\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&client->dev, + "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + lv = devm_kzalloc(&client->dev, sizeof(*lv), GFP_KERNEL); + if (!lv) + return -ENOMEM; + + lv->client = client; + lv->pdata = pdata; + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = min_t(unsigned int, pdata->max_value, + LV5207LP_MAX_BRIGHTNESS); + props.brightness = clamp_t(unsigned int, pdata->def_value, 0, + props.max_brightness); + + backlight = backlight_device_register(dev_name(&client->dev), + &lv->client->dev, lv, + &lv5207lp_backlight_ops, &props); + if (IS_ERR(backlight)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(backlight); + } + + backlight_update_status(backlight); + i2c_set_clientdata(client, backlight); + + return 0; +} + +static int lv5207lp_remove(struct i2c_client *client) +{ + struct backlight_device *backlight = i2c_get_clientdata(client); + + backlight->props.brightness = 0; + backlight_update_status(backlight); + backlight_device_unregister(backlight); + + return 0; +} + +static const struct i2c_device_id lv5207lp_ids[] = { + { "lv5207lp", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lv5207lp_ids); + +static struct i2c_driver lv5207lp_driver = { + .driver = { + .name = "lv5207lp", + }, + .probe = lv5207lp_probe, + .remove = lv5207lp_remove, + .id_table = lv5207lp_ids, +}; + +module_i2c_driver(lv5207lp_driver); + +MODULE_DESCRIPTION("Sanyo LV5207LP Backlight Driver"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/lv5207lp.h b/include/linux/platform_data/lv5207lp.h new file mode 100644 index 0000000..7dc4d9a --- /dev/null +++ b/include/linux/platform_data/lv5207lp.h @@ -0,0 +1,19 @@ +/* + * lv5207lp.h - Sanyo LV5207LP LEDs Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LV5207LP_H__ +#define __LV5207LP_H__ + +struct device; + +struct lv5207lp_platform_data { + struct device *fbdev; + unsigned int max_value; + unsigned int def_value; +}; + +#endif -- cgit v0.10.2 From 67b43e590415866649e5ba8a6421bb84ecb74f72 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Jul 2013 21:13:26 +0200 Subject: backlight: Add ROHM BD6107 backlight driver The BD6107 is a multi-purpose 10 channels LED driver for the mobile market. Only the main channel is supported by this driver. Signed-off-by: Laurent Pinchart Acked-by: Jingoo Han Signed-off-by: Simon Horman diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index b304e07..d4a7a35 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -438,6 +438,12 @@ config BACKLIGHT_LV5207LP help If you have a Sanyo LV5207LP say Y to enable the backlight driver. +config BACKLIGHT_BD6107 + tristate "Rohm BD6107 Backlight" + depends on I2C + help + If you have a Rohm BD6107 say Y to enable the backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 4e5e8116..38e1bab 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o +obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c new file mode 100644 index 0000000..15e3294 --- /dev/null +++ b/drivers/video/backlight/bd6107.c @@ -0,0 +1,213 @@ +/* + * ROHM Semiconductor BD6107 LED Driver + * + * Copyright (C) 2013 Ideas on board SPRL + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BD6107_PSCNT1 0x00 +#define BD6107_PSCNT1_PSCNTREG2 (1 << 2) +#define BD6107_PSCNT1_PSCNTREG1 (1 << 0) +#define BD6107_REGVSET 0x02 +#define BD6107_REGVSET_REG1VSET_2_85V (1 << 2) +#define BD6107_REGVSET_REG1VSET_2_80V (0 << 2) +#define BD6107_LEDCNT1 0x03 +#define BD6107_LEDCNT1_LEDONOFF2 (1 << 1) +#define BD6107_LEDCNT1_LEDONOFF1 (1 << 0) +#define BD6107_PORTSEL 0x04 +#define BD6107_PORTSEL_LEDM(n) (1 << (n)) +#define BD6107_RGB1CNT1 0x05 +#define BD6107_RGB1CNT2 0x06 +#define BD6107_RGB1CNT3 0x07 +#define BD6107_RGB1CNT4 0x08 +#define BD6107_RGB1CNT5 0x09 +#define BD6107_RGB1FLM 0x0a +#define BD6107_RGB2CNT1 0x0b +#define BD6107_RGB2CNT2 0x0c +#define BD6107_RGB2CNT3 0x0d +#define BD6107_RGB2CNT4 0x0e +#define BD6107_RGB2CNT5 0x0f +#define BD6107_RGB2FLM 0x10 +#define BD6107_PSCONT3 0x11 +#define BD6107_SMMONCNT 0x12 +#define BD6107_DCDCCNT 0x13 +#define BD6107_IOSEL 0x14 +#define BD6107_OUT1 0x15 +#define BD6107_OUT2 0x16 +#define BD6107_MASK1 0x17 +#define BD6107_MASK2 0x18 +#define BD6107_FACTOR1 0x19 +#define BD6107_FACTOR2 0x1a +#define BD6107_CLRFACT1 0x1b +#define BD6107_CLRFACT2 0x1c +#define BD6107_STATE1 0x1d +#define BD6107_LSIVER 0x1e +#define BD6107_GRPSEL 0x1f +#define BD6107_LEDCNT2 0x20 +#define BD6107_LEDCNT3 0x21 +#define BD6107_MCURRENT 0x22 +#define BD6107_MAINCNT1 0x23 +#define BD6107_MAINCNT2 0x24 +#define BD6107_SLOPECNT 0x25 +#define BD6107_MSLOPE 0x26 +#define BD6107_RGBSLOPE 0x27 +#define BD6107_TEST 0x29 +#define BD6107_SFTRST 0x2a +#define BD6107_SFTRSTGD 0x2b + +struct bd6107 { + struct i2c_client *client; + struct backlight_device *backlight; + struct bd6107_platform_data *pdata; +}; + +static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(bd->client, reg, data); +} + +static int bd6107_backlight_update_status(struct backlight_device *backlight) +{ + struct bd6107 *bd = bl_get_data(backlight); + int brightness = backlight->props.brightness; + + if (backlight->props.power != FB_BLANK_UNBLANK || + backlight->props.fb_blank != FB_BLANK_UNBLANK || + backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) + brightness = 0; + + if (brightness) { + bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) | + BD6107_PORTSEL_LEDM(1) | BD6107_PORTSEL_LEDM(0)); + bd6107_write(bd, BD6107_MAINCNT1, brightness); + bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1); + } else { + gpio_set_value(bd->pdata->reset, 0); + msleep(24); + gpio_set_value(bd->pdata->reset, 1); + } + + return 0; +} + +static int bd6107_backlight_get_brightness(struct backlight_device *backlight) +{ + return backlight->props.brightness; +} + +static int bd6107_backlight_check_fb(struct backlight_device *backlight, + struct fb_info *info) +{ + struct bd6107 *bd = bl_get_data(backlight); + + return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->dev; +} + +static const struct backlight_ops bd6107_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = bd6107_backlight_update_status, + .get_brightness = bd6107_backlight_get_brightness, + .check_fb = bd6107_backlight_check_fb, +}; + +static int bd6107_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bd6107_platform_data *pdata = client->dev.platform_data; + struct backlight_device *backlight; + struct backlight_properties props; + struct bd6107 *bd; + int ret; + + if (pdata == NULL || !pdata->reset) { + dev_err(&client->dev, "No reset GPIO in platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&client->dev, + "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + bd->client = client; + bd->pdata = pdata; + + ret = devm_gpio_request_one(&client->dev, pdata->reset, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "reset"); + if (ret < 0) { + dev_err(&client->dev, "unable to request reset GPIO\n"); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 128; + props.brightness = clamp_t(unsigned int, pdata->def_value, 0, + props.max_brightness); + + backlight = backlight_device_register(dev_name(&client->dev), + &bd->client->dev, bd, + &bd6107_backlight_ops, &props); + if (IS_ERR(backlight)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(backlight); + } + + backlight_update_status(backlight); + i2c_set_clientdata(client, backlight); + + return 0; +} + +static int bd6107_remove(struct i2c_client *client) +{ + struct backlight_device *backlight = i2c_get_clientdata(client); + + backlight->props.brightness = 0; + backlight_update_status(backlight); + backlight_device_unregister(backlight); + + return 0; +} + +static const struct i2c_device_id bd6107_ids[] = { + { "bd6107", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bd6107_ids); + +static struct i2c_driver bd6107_driver = { + .driver = { + .name = "bd6107", + }, + .probe = bd6107_probe, + .remove = bd6107_remove, + .id_table = bd6107_ids, +}; + +module_i2c_driver(bd6107_driver); + +MODULE_DESCRIPTION("Rohm BD6107 Backlight Driver"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/bd6107.h b/include/linux/platform_data/bd6107.h new file mode 100644 index 0000000..671d650 --- /dev/null +++ b/include/linux/platform_data/bd6107.h @@ -0,0 +1,19 @@ +/* + * bd6107.h - Rohm BD6107 LEDs Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __BD6107_H__ +#define __BD6107_H__ + +struct device; + +struct bd6107_platform_data { + struct device *fbdev; + int reset; /* Reset GPIO */ + unsigned int def_value; +}; + +#endif -- cgit v0.10.2 From c9031fbb35bd44d99c5cfe7d3c97ec238d63643a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 26 May 2013 17:53:37 -0700 Subject: ARM: shmobile: r8a7778: add __initdata on resource and device data These data will be kmemdup()'ed on platform_device_add_resources() and platform_device_add_data() Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 80c2039..b70bfeef 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -53,7 +53,7 @@ .irqs = SCIx_IRQ_MUXED(irq), \ } -static struct plat_sci_port scif_platform_data[] = { +static struct plat_sci_port scif_platform_data[] __initdata = { SCIF_INFO(0xffe40000, gic_iid(0x66)), SCIF_INFO(0xffe41000, gic_iid(0x67)), SCIF_INFO(0xffe42000, gic_iid(0x68)), @@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = { }; /* TMU */ -static struct resource sh_tmu0_resources[] = { +static struct resource sh_tmu0_resources[] __initdata = { DEFINE_RES_MEM(0xffd80008, 12), DEFINE_RES_IRQ(gic_iid(0x40)), }; -static struct sh_timer_config sh_tmu0_platform_data = { +static struct sh_timer_config sh_tmu0_platform_data __initdata = { .name = "TMU00", .channel_offset = 0x4, .timer_bit = 0, .clockevent_rating = 200, }; -static struct resource sh_tmu1_resources[] = { +static struct resource sh_tmu1_resources[] __initdata = { DEFINE_RES_MEM(0xffd80014, 12), DEFINE_RES_IRQ(gic_iid(0x41)), }; -static struct sh_timer_config sh_tmu1_platform_data = { +static struct sh_timer_config sh_tmu1_platform_data __initdata = { .name = "TMU01", .channel_offset = 0x10, .timer_bit = 1, @@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ohci); /* Ether */ -static struct resource ether_resources[] = { +static struct resource ether_resources[] __initdata = { DEFINE_RES_MEM(0xfde00000, 0x400), DEFINE_RES_IRQ(gic_iid(0x89)), }; @@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) } /* PFC/GPIO */ -static struct resource pfc_resources[] = { +static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xfffc0000, 0x118), }; #define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] = { \ +static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ DEFINE_RES_IRQ(gic_iid(0x87)), \ }; \ \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ .gpio_base = 32 * (idx), \ .irq_base = GPIO_IRQ_BASE(idx), \ .number_of_pins = 32, \ @@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void) }; /* SDHI */ -static struct resource sdhi_resources[] = { +static struct resource sdhi_resources[] __initdata = { /* SDHI0 */ DEFINE_RES_MEM(0xFFE4C000, 0x100), DEFINE_RES_IRQ(gic_iid(0x77)), @@ -365,12 +365,12 @@ void __init r8a7778_init_late(void) platform_device_register_full(&ohci_info); } -static struct renesas_intc_irqpin_config irqpin_platform_data = { +static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, }; -static struct resource irqpin_resources[] = { +static struct resource irqpin_resources[] __initdata = { DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ -- cgit v0.10.2 From 474f67587345bf7b32bbd9d2b5621e85500103c5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 27 Jun 2013 17:09:01 +0900 Subject: ARM: shmobile: sh73a0 pinmux platform device cleanup Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm Acked-by: Laurent Pinchart [ remove const from resource pfc_resources to avoid section miss-match reported by 4.4.5 ] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 96e7ca1..79a6040 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -61,29 +61,16 @@ void __init sh73a0_map_io(void) iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); } -static struct resource sh73a0_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605801c, - .end = 0xe6058027, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device sh73a0_pfc_device = { - .name = "pfc-sh73a0", - .id = -1, - .resource = sh73a0_pfc_resources, - .num_resources = ARRAY_SIZE(sh73a0_pfc_resources), +/* PFC */ +static struct resource pfc_resources[] __initdata = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605801c, 0x000c), }; void __init sh73a0_pinmux_init(void) { - platform_device_register(&sh73a0_pfc_device); + platform_device_register_simple("pfc-sh73a0", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct plat_sci_port scif0_platform_data = { -- cgit v0.10.2 From 34dd9fc04a028edad7658006764c4d18ac3dca73 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 26 May 2013 22:05:23 +0900 Subject: ARM: shmobile: emev2: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 1ccddd2..6e8b6ac 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -454,7 +453,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END -- cgit v0.10.2 From 0bdbe04db005e025d3522ad3ae9797a4954528e9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 26 May 2013 22:05:56 +0900 Subject: ARM: shmobile: r8a73a4: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 7f45c2e..a8c4e41 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -18,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include -#include #include #include #include @@ -194,7 +193,6 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_irq = irqchip_init, .init_machine = r8a73a4_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a73a4_boards_compat_dt, -- cgit v0.10.2 From c7f6085f6ea7b7cf155f470431cf1b12cd999450 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:21 +0900 Subject: ARM: shmobile: ape6evm: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a73a4 SoC and altered the subject to use the same format as the patch that updates the r8a73a4. ] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 5eb0caa..1fbc39a 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include @@ -102,7 +101,6 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_irq = irqchip_init, .init_time = shmobile_timer_init, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, -- cgit v0.10.2 From 125332daf2e4119614c561bc8cbf1f49cd243023 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 May 2013 18:00:22 +0900 Subject: ARM: shmobile: r8a7790: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 28f9475..d405dbd 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -19,7 +19,6 @@ */ #include -#include #include #include #include @@ -188,7 +187,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_irq = irqchip_init, .init_machine = r8a7790_add_standard_devices_dt, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, -- cgit v0.10.2 From 5f85052c606e38c98de28170a2df72f78931aa30 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:31 +0900 Subject: ARM: shmobile: lager: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the r8a7790 SoC and altered the subject to use the same format as the patch that updates the r8a7790. ] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d..1e99b17 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -103,7 +102,6 @@ static const char *lager_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(LAGER_DT, "lager") - .init_irq = irqchip_init, .init_time = r8a7790_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, -- cgit v0.10.2 From 7d6b8883547feacc705c476cdb7f272e309d9fb0 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 May 2013 18:00:49 +0900 Subject: ARM: shmobile: sh73a0: Remove init_irq declaration in machine description Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is specified") removed the need to explictly setup the init_irq field in the machine description when using only irqchip_init. Remove that declaration for shmobile as well. Signed-off-by: Maxime Ripard Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 79a6040..bd9370f 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -975,7 +974,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END -- cgit v0.10.2 From fc492ba58aa6642f34eba716daf6ec4d2715e492 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 15:01:40 +0900 Subject: ARM: shmobile: kzm9g: Remove init_irq declaration in machine description Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the sh73a0 SoC and altered the subject to use the same format as the patch that updates the sh73a0. ] Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 44055fe..41092bb 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = kzm_init, .init_time = shmobile_timer_init, .dt_compat = kzm9g_boards_compat_dt, -- cgit v0.10.2 From a597d8df88143f7a409b260b1e89735eb0bdca05 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:15 +0900 Subject: ARM: shmobile: Remove unused EMEV2 auxdata and callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 6e8b6ac..b0564ce 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -434,15 +434,6 @@ void __init emev2_init_irq(void) } #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { - { } -}; - -static void __init emev2_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - emev2_auxdata_lookup, NULL); -} static const char *emev2_boards_compat_dt[] __initdata = { "renesas,emev2", @@ -453,7 +444,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END -- cgit v0.10.2 From 88378837780166d67a11142cd6f76596c0a2d8c3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:24 +0900 Subject: ARM: shmobile: Remove unused r8a7740 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 00c5a70..ac29c2e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -986,16 +986,22 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { - { } -}; +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, ARRAY_SIZE(r8a7740_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7740_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } void __init r8a7740_init_delay(void) -- cgit v0.10.2 From 40216263d3d0b9b46688a28a96daf66fe75caa28 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:33 +0900 Subject: ARM: shmobile: Remove unused r8a7778 auxdata and callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index b70bfeef..2a101eb 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -457,16 +457,6 @@ void __init r8a7778_init_irq_dt(void) r8a7778_init_irq_common(); } -static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = { - {}, -}; - -void __init r8a7778_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - r8a7778_auxdata_lookup, NULL); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, @@ -475,7 +465,6 @@ static const char *r8a7778_compat_dt[] __initdata = { DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = r8a7778_init_delay, .init_irq = r8a7778_init_irq_dt, - .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, .init_late = r8a7778_init_late, -- cgit v0.10.2 From 41b0156ca5a1460f8f6dde7e57baf1b80d6a7030 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:46 +0900 Subject: ARM: shmobile: Remove unused r8a7779 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 3986877..66d3826 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void) shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ } -static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { - {}, -}; - void __init r8a7779_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void) platform_add_devices(r8a7779_devices_dt, ARRAY_SIZE(r8a7779_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7779_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *r8a7779_compat_dt[] __initdata = { -- cgit v0.10.2 From 975e5af958916f8b76a8926cd4d50c04936d7079 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:41:55 +0900 Subject: ARM: shmobile: Remove unused sh7372 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 5502d62..13e6fdb 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void) shmobile_setup_console(); } -static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = { - { } -}; - void __init sh7372_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void) platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); - of_platform_populate(NULL, of_default_bus_match_table, - sh7372_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *sh7372_boards_compat_dt[] __initdata = { -- cgit v0.10.2 From ea31597fe72245985e9d2521ea7e87acf2f14252 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:42:04 +0900 Subject: ARM: shmobile: Remove unused sh73a0 auxdata table Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index bd9370f..516c239 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -944,10 +944,6 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { - {}, -}; - void __init sh73a0_add_standard_devices_dt(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; @@ -957,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void) platform_add_devices(sh73a0_devices_dt, ARRAY_SIZE(sh73a0_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - sh73a0_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); /* Instantiate cpufreq-cpu0 */ platform_device_register_full(&devinfo); -- cgit v0.10.2 From fdbc45dbbe5a69a2c665630ab577726e01eadf23 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 1 Jul 2013 14:42:13 +0900 Subject: ARM: shmobile: Remove redundant r8a7790 callback Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index d405dbd..b7e78b9 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -176,10 +176,6 @@ void __init r8a7790_timer_init(void) } #ifdef CONFIG_USE_OF -void __init r8a7790_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char *r8a7790_boards_compat_dt[] __initdata = { "renesas,r8a7790", @@ -187,7 +183,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_machine = r8a7790_add_standard_devices_dt, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END -- cgit v0.10.2 From 4146fa8861419ac0d2c3607168339621586f6c03 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:33 +0900 Subject: ARM: shmobile: Remove unused EMEV2/KZM9D early console Remove EMEV2 early console code from KZM9D and instead rely on console setup during regular platform device probe time. This makes the DT code and the KZM9D board support behave the same. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 4368000..15900f1 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -85,7 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = { DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, - .init_early = emev2_add_early_devices, + .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index ac37517..3e0c044 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -3,7 +3,7 @@ extern void emev2_map_io(void); extern void emev2_init_irq(void); -extern void emev2_add_early_devices(void); +extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); extern void emev2_set_boot_vector(unsigned long value); diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index b0564ce..f6edd19 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -375,14 +375,11 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static struct platform_device *emev2_early_devices[] __initdata = { +static struct platform_device *emev2_devices[] __initdata = { &uart0_device, &uart1_device, &uart2_device, &uart3_device, -}; - -static struct platform_device *emev2_late_devices[] __initdata = { &sti_device, &gio0_device, &gio1_device, @@ -396,29 +393,14 @@ void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - platform_add_devices(emev2_late_devices, - ARRAY_SIZE(emev2_late_devices)); + platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices)); } -static void __init emev2_init_delay(void) +void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_add_early_devices(void) -{ - emev2_init_delay(); - - early_platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - void __init emev2_init_irq(void) { void __iomem *gic_dist_base; -- cgit v0.10.2 From 210e179da2e39c965872b941a36e55ab78328e49 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Jul 2013 18:27:49 +0900 Subject: ARM: shmobile: Make EMEV2 platform devices more compact Convert the EMEV2 SoC device setup code from using very verbose resources and static platform devices to the same style as more recent boards. This reduces the size of the code. Signed-off-by: Magnus Damm Acked-by: Arnd Bergmann Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index f6edd19..e4b4693 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -62,102 +62,40 @@ void __init emev2_map_io(void) /* UART */ static struct resource uart0_resources[] = { - [0] = { - .start = 0xe1020000, - .end = 0xe1020037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 40, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart0_device = { - .name = "serial8250-em", - .id = 0, - .num_resources = ARRAY_SIZE(uart0_resources), - .resource = uart0_resources, + DEFINE_RES_MEM(0xe1020000, 0x38), + DEFINE_RES_IRQ(40), }; static struct resource uart1_resources[] = { - [0] = { - .start = 0xe1030000, - .end = 0xe1030037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 41, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart1_device = { - .name = "serial8250-em", - .id = 1, - .num_resources = ARRAY_SIZE(uart1_resources), - .resource = uart1_resources, + DEFINE_RES_MEM(0xe1030000, 0x38), + DEFINE_RES_IRQ(41), }; static struct resource uart2_resources[] = { - [0] = { - .start = 0xe1040000, - .end = 0xe1040037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 42, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart2_device = { - .name = "serial8250-em", - .id = 2, - .num_resources = ARRAY_SIZE(uart2_resources), - .resource = uart2_resources, + DEFINE_RES_MEM(0xe1040000, 0x38), + DEFINE_RES_IRQ(42), }; static struct resource uart3_resources[] = { - [0] = { - .start = 0xe1050000, - .end = 0xe1050037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 43, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(0xe1050000, 0x38), + DEFINE_RES_IRQ(43), }; -static struct platform_device uart3_device = { - .name = "serial8250-em", - .id = 3, - .num_resources = ARRAY_SIZE(uart3_resources), - .resource = uart3_resources, -}; +#define emev2_register_uart(idx) \ + platform_device_register_simple("serial8250-em", idx, \ + uart##idx##_resources, \ + ARRAY_SIZE(uart##idx##_resources)) /* STI */ static struct resource sti_resources[] = { - [0] = { - .name = "STI", - .start = 0xe0180000, - .end = 0xe0180053, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 157, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sti_device = { - .name = "em_sti", - .id = 0, - .resource = sti_resources, - .num_resources = ARRAY_SIZE(sti_resources), + DEFINE_RES_MEM(0xe0180000, 0x54), + DEFINE_RES_IRQ(157), }; +#define emev2_register_sti() \ + platform_device_register_simple("em_sti", 0, \ + sti_resources, \ + ARRAY_SIZE(sti_resources)) /* GIO */ static struct gpio_em_config gio0_config = { @@ -167,36 +105,10 @@ static struct gpio_em_config gio0_config = { }; static struct resource gio0_resources[] = { - [0] = { - .name = "GIO_000", - .start = 0xe0050000, - .end = 0xe005002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_000", - .start = 0xe0050040, - .end = 0xe005005f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 99, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 100, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio0_device = { - .name = "em_gio", - .id = 0, - .resource = gio0_resources, - .num_resources = ARRAY_SIZE(gio0_resources), - .dev = { - .platform_data = &gio0_config, - }, + DEFINE_RES_MEM(0xe0050000, 0x2c), + DEFINE_RES_MEM(0xe0050040, 0x20), + DEFINE_RES_IRQ(99), + DEFINE_RES_IRQ(100), }; static struct gpio_em_config gio1_config = { @@ -206,36 +118,10 @@ static struct gpio_em_config gio1_config = { }; static struct resource gio1_resources[] = { - [0] = { - .name = "GIO_032", - .start = 0xe0050080, - .end = 0xe00500ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_032", - .start = 0xe00500c0, - .end = 0xe00500df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 101, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 102, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio1_device = { - .name = "em_gio", - .id = 1, - .resource = gio1_resources, - .num_resources = ARRAY_SIZE(gio1_resources), - .dev = { - .platform_data = &gio1_config, - }, + DEFINE_RES_MEM(0xe0050080, 0x2c), + DEFINE_RES_MEM(0xe00500c0, 0x20), + DEFINE_RES_IRQ(101), + DEFINE_RES_IRQ(102), }; static struct gpio_em_config gio2_config = { @@ -245,36 +131,10 @@ static struct gpio_em_config gio2_config = { }; static struct resource gio2_resources[] = { - [0] = { - .name = "GIO_064", - .start = 0xe0050100, - .end = 0xe005012b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_064", - .start = 0xe0050140, - .end = 0xe005015f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 103, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 104, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio2_device = { - .name = "em_gio", - .id = 2, - .resource = gio2_resources, - .num_resources = ARRAY_SIZE(gio2_resources), - .dev = { - .platform_data = &gio2_config, - }, + DEFINE_RES_MEM(0xe0050100, 0x2c), + DEFINE_RES_MEM(0xe0050140, 0x20), + DEFINE_RES_IRQ(103), + DEFINE_RES_IRQ(104), }; static struct gpio_em_config gio3_config = { @@ -284,36 +144,10 @@ static struct gpio_em_config gio3_config = { }; static struct resource gio3_resources[] = { - [0] = { - .name = "GIO_096", - .start = 0xe0050180, - .end = 0xe00501ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_096", - .start = 0xe00501c0, - .end = 0xe00501df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 105, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 106, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio3_device = { - .name = "em_gio", - .id = 3, - .resource = gio3_resources, - .num_resources = ARRAY_SIZE(gio3_resources), - .dev = { - .platform_data = &gio3_config, - }, + DEFINE_RES_MEM(0xe0050180, 0x2c), + DEFINE_RES_MEM(0xe00501c0, 0x20), + DEFINE_RES_IRQ(105), + DEFINE_RES_IRQ(106), }; static struct gpio_em_config gio4_config = { @@ -323,77 +157,44 @@ static struct gpio_em_config gio4_config = { }; static struct resource gio4_resources[] = { - [0] = { - .name = "GIO_128", - .start = 0xe0050200, - .end = 0xe005022b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_128", - .start = 0xe0050240, - .end = 0xe005025f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 107, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 108, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe0050200, 0x2c), + DEFINE_RES_MEM(0xe0050240, 0x20), + DEFINE_RES_IRQ(107), + DEFINE_RES_IRQ(108), }; -static struct platform_device gio4_device = { - .name = "em_gio", - .id = 4, - .resource = gio4_resources, - .num_resources = ARRAY_SIZE(gio4_resources), - .dev = { - .platform_data = &gio4_config, - }, -}; +#define emev2_register_gio(idx) \ + platform_device_register_resndata(&platform_bus, "em_gio", \ + idx, gio##idx##_resources, \ + ARRAY_SIZE(gio##idx##_resources), \ + &gio##idx##_config, \ + sizeof(struct gpio_em_config)) static struct resource pmu_resources[] = { - [0] = { - .start = 152, - .end = 152, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = 153, - .end = 153, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_IRQ(152), + DEFINE_RES_IRQ(153), }; -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static struct platform_device *emev2_devices[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &sti_device, - &gio0_device, - &gio1_device, - &gio2_device, - &gio3_device, - &gio4_device, - &pmu_device, -}; +#define emev2_register_pmu() \ + platform_device_register_simple("arm-pmu", -1, \ + pmu_resources, \ + ARRAY_SIZE(pmu_resources)) void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices)); + emev2_register_uart(0); + emev2_register_uart(1); + emev2_register_uart(2); + emev2_register_uart(3); + emev2_register_sti(); + emev2_register_gio(0); + emev2_register_gio(1); + emev2_register_gio(2); + emev2_register_gio(3); + emev2_register_gio(4); + emev2_register_pmu(); } void __init emev2_init_delay(void) -- cgit v0.10.2 From 09cb2e366737ac70f1d7c6c0a3747a75c8f90f1e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 8 Jul 2013 15:20:05 +0900 Subject: ARM: shmobile: Fix EMEV2 clock comment typo Update the STI timer frequency comment to 32.768 kHz to fix 37 kHz typo. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 4710f18..56dd0cf 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -221,7 +221,7 @@ void __init emev2_clock_init(void) smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); BUG_ON(!smu_base); - /* setup STI timer to run on 37.768 kHz and deassert reset */ + /* setup STI timer to run on 32.768 kHz and deassert reset */ emev2_smu_write(0, STI_CLKSEL); emev2_smu_write(1, STI_RSTCTRL); -- cgit v0.10.2 From 54aa4c48bc0d364565e7d1c722b07314efdc2a10 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 9 Jul 2013 01:48:34 -0700 Subject: ARM: shmobile: r8a7778: remove r8a7778_init_irq() This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 851d027..9b561bf 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info); extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); -extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 2a101eb..a3a2e37 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm) &irqpin_platform_data, sizeof(irqpin_platform_data)); } +void __init r8a7778_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +} + +#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -static void __init r8a7778_init_irq_common(void) +void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); BUG_ON(!base); + irqchip_init(); + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -430,33 +438,6 @@ static void __init r8a7778_init_irq_common(void) iounmap(base); } -void __init r8a7778_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE); - gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - r8a7778_init_irq_common(); -} - -void __init r8a7778_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -} - -#ifdef CONFIG_USE_OF -void __init r8a7778_init_irq_dt(void) -{ - irqchip_init(); - r8a7778_init_irq_common(); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, -- cgit v0.10.2 From ebd9616f439a8a46b9dca9a272b342f34c5f3614 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 9 Jul 2013 19:40:16 +0900 Subject: ARM: shmobile: Remove unused mach/dma.h Remove mach-shmobile mach/dma.h since it only seems to be used on non-mach-shmobile platforms. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h deleted file mode 100644 index 40a8c17..0000000 --- a/arch/arm/mach-shmobile/include/mach/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ -- cgit v0.10.2 From 14bd03e08831a52035e601ae85b05a4849214ec4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Jul 2013 21:13:27 +0200 Subject: ARM: mach-shmobile: mackerel: Use gpio-backlight Replace the backlight callback with a gpio-backlight platform device. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 85f51a8..af06753 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,6 @@ #include #include #include - #include