From d5cc9901ca05a816bd05b69699a1ba5358871ad5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Apr 2013 12:54:18 +0000 Subject: cpufreq: blackfin: move cpufreq driver to drivers/cpufreq This patch moves cpufreq driver of BLACKFIN architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar Acked-by: Steven Miao Signed-off-by: Rafael J. Wysocki diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 75f0ba2..675466d 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o ifneq ($(CONFIG_BF60x),y) obj-$(CONFIG_PM) += dpmc_modes.o endif -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c deleted file mode 100644 index 995511e80..0000000 --- a/arch/blackfin/mach-common/cpufreq.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Blackfin core clock scaling - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -/* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ -static struct cpufreq_frequency_table bfin_freq_table[] = { - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 1, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 2, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, -}; - -static struct bfin_dpm_state { - unsigned int csel; /* system clock divider */ - unsigned int tscale; /* change the divider on the core timer interrupt */ -} dpm_state_table[3]; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) -/* - * normalized to maximum frequency offset for CYCLES, - * used in time-ts cycles clock source, but could be used - * somewhere also. - */ -unsigned long long __bfin_cycles_off; -unsigned int __bfin_cycles_mod; -#endif - -/**************************************************************************/ -static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) -{ - - unsigned long csel, min_cclk; - int index; - - /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ - && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - -#ifndef CONFIG_BF60x - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); -#else - csel = bfin_read32(CGU0_DIV) & 0x1F; -#endif - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; -#ifndef CONFIG_BF60x - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ -#else - dpm_state_table[index].csel = csel; -#endif - dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } - return; -} - -static void bfin_adjust_core_timer(void *info) -{ - unsigned int tscale; - unsigned int index = *(unsigned int *)info; - - /* we have to adjust the core timer, because it is using cclk */ - tscale = dpm_state_table[index].tscale; - bfin_write_TSCALE(tscale); - return; -} - -static unsigned int bfin_getfreq_khz(unsigned int cpu) -{ - /* Both CoreA/B have the same core clock */ - return get_cclk() / 1000; -} - -#ifdef CONFIG_BF60x -unsigned long cpu_set_cclk(int cpu, unsigned long new) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, "CCLK"); - if (IS_ERR(clk)) - return -ENODEV; - - ret = clk_set_rate(clk, new); - clk_put(clk); - return ret; -} -#endif - -static int bfin_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ -#ifndef CONFIG_BF60x - unsigned int plldiv; -#endif - unsigned int index; - unsigned long cclk_hz; - struct cpufreq_freqs freqs; - static unsigned long lpj_ref; - static unsigned int lpj_ref_freq; - int ret = 0; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles_t cycles; -#endif - - if (cpufreq_frequency_table_target(policy, bfin_freq_table, target_freq, - relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; - - pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); -#ifndef CONFIG_BF60x - plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; - bfin_write_PLL_DIV(plldiv); -#else - ret = cpu_set_cclk(policy->cpu, freqs.new * 1000); - if (ret != 0) { - WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); - return ret; - } -#endif - on_each_cpu(bfin_adjust_core_timer, &index, 1); -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; -#endif - if (!lpj_ref_freq) { - lpj_ref = loops_per_jiffy; - lpj_ref_freq = freqs.old; - } - if (freqs.new != freqs.old) { - loops_per_jiffy = cpufreq_scale(lpj_ref, - lpj_ref_freq, freqs.new); - } - - /* TODO: just test case for cycles clock source, remove later */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: done\n"); - return ret; -} - -static int bfin_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, bfin_freq_table); -} - -static int __bfin_cpu_init(struct cpufreq_policy *policy) -{ - - unsigned long cclk, sclk; - - cclk = get_cclk() / 1000; - sclk = get_sclk() / 1000; - - if (policy->cpu == CPUFREQ_CPU) - bfin_init_tables(cclk, sclk); - - policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - - policy->cur = cclk; - cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); -} - -static struct freq_attr *bfin_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bfin_driver = { - .verify = bfin_verify_speed, - .target = bfin_target, - .get = bfin_getfreq_khz, - .init = __bfin_cpu_init, - .name = "bfin cpufreq", - .owner = THIS_MODULE, - .attr = bfin_freq_attr, -}; - -static int __init bfin_cpu_init(void) -{ - return cpufreq_register_driver(&bfin_driver); -} - -static void __exit bfin_cpu_exit(void) -{ - cpufreq_unregister_driver(&bfin_driver); -} - -MODULE_AUTHOR("Michael Hennerich "); -MODULE_DESCRIPTION("cpufreq driver for Blackfin"); -MODULE_LICENSE("GPL"); - -module_init(bfin_cpu_init); -module_exit(bfin_cpu_exit); diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 2701aca..6f8fec3 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -78,3 +78,4 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o +obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c new file mode 100644 index 0000000..995511e80 --- /dev/null +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -0,0 +1,247 @@ +/* + * Blackfin core clock scaling + * + * Copyright 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* this is the table of CCLK frequencies, in Hz */ +/* .index is the entry in the auxiliary dpm_state_table[] */ +static struct cpufreq_frequency_table bfin_freq_table[] = { + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 1, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 2, + }, + { + .frequency = CPUFREQ_TABLE_END, + .index = 0, + }, +}; + +static struct bfin_dpm_state { + unsigned int csel; /* system clock divider */ + unsigned int tscale; /* change the divider on the core timer interrupt */ +} dpm_state_table[3]; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) +/* + * normalized to maximum frequency offset for CYCLES, + * used in time-ts cycles clock source, but could be used + * somewhere also. + */ +unsigned long long __bfin_cycles_off; +unsigned int __bfin_cycles_mod; +#endif + +/**************************************************************************/ +static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) +{ + + unsigned long csel, min_cclk; + int index; + + /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ +#if ANOMALY_05000273 || ANOMALY_05000274 || \ + (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ + && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) + min_cclk = sclk * 2; +#else + min_cclk = sclk; +#endif + +#ifndef CONFIG_BF60x + csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); +#else + csel = bfin_read32(CGU0_DIV) & 0x1F; +#endif + + for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { + bfin_freq_table[index].frequency = cclk >> index; +#ifndef CONFIG_BF60x + dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ +#else + dpm_state_table[index].csel = csel; +#endif + dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; + + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", + bfin_freq_table[index].frequency, + dpm_state_table[index].csel, + dpm_state_table[index].tscale); + } + return; +} + +static void bfin_adjust_core_timer(void *info) +{ + unsigned int tscale; + unsigned int index = *(unsigned int *)info; + + /* we have to adjust the core timer, because it is using cclk */ + tscale = dpm_state_table[index].tscale; + bfin_write_TSCALE(tscale); + return; +} + +static unsigned int bfin_getfreq_khz(unsigned int cpu) +{ + /* Both CoreA/B have the same core clock */ + return get_cclk() / 1000; +} + +#ifdef CONFIG_BF60x +unsigned long cpu_set_cclk(int cpu, unsigned long new) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "CCLK"); + if (IS_ERR(clk)) + return -ENODEV; + + ret = clk_set_rate(clk, new); + clk_put(clk); + return ret; +} +#endif + +static int bfin_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ +#ifndef CONFIG_BF60x + unsigned int plldiv; +#endif + unsigned int index; + unsigned long cclk_hz; + struct cpufreq_freqs freqs; + static unsigned long lpj_ref; + static unsigned int lpj_ref_freq; + int ret = 0; + +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles_t cycles; +#endif + + if (cpufreq_frequency_table_target(policy, bfin_freq_table, target_freq, + relation, &index)) + return -EINVAL; + + cclk_hz = bfin_freq_table[index].frequency; + + freqs.old = bfin_getfreq_khz(0); + freqs.new = cclk_hz; + + pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", + cclk_hz, target_freq, freqs.old); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); +#ifndef CONFIG_BF60x + plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel; + bfin_write_PLL_DIV(plldiv); +#else + ret = cpu_set_cclk(policy->cpu, freqs.new * 1000); + if (ret != 0) { + WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); + return ret; + } +#endif + on_each_cpu(bfin_adjust_core_timer, &index, 1); +#if defined(CONFIG_CYCLES_CLOCKSOURCE) + cycles = get_cycles(); + SSYNC(); + cycles += 10; /* ~10 cycles we lose after get_cycles() */ + __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index); + __bfin_cycles_mod = index; +#endif + if (!lpj_ref_freq) { + lpj_ref = loops_per_jiffy; + lpj_ref_freq = freqs.old; + } + if (freqs.new != freqs.old) { + loops_per_jiffy = cpufreq_scale(lpj_ref, + lpj_ref_freq, freqs.new); + } + + /* TODO: just test case for cycles clock source, remove later */ + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + pr_debug("cpufreq: done\n"); + return ret; +} + +static int bfin_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, bfin_freq_table); +} + +static int __bfin_cpu_init(struct cpufreq_policy *policy) +{ + + unsigned long cclk, sclk; + + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; + + if (policy->cpu == CPUFREQ_CPU) + bfin_init_tables(cclk, sclk); + + policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ + + policy->cur = cclk; + cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); +} + +static struct freq_attr *bfin_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bfin_driver = { + .verify = bfin_verify_speed, + .target = bfin_target, + .get = bfin_getfreq_khz, + .init = __bfin_cpu_init, + .name = "bfin cpufreq", + .owner = THIS_MODULE, + .attr = bfin_freq_attr, +}; + +static int __init bfin_cpu_init(void) +{ + return cpufreq_register_driver(&bfin_driver); +} + +static void __exit bfin_cpu_exit(void) +{ + cpufreq_unregister_driver(&bfin_driver); +} + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("cpufreq driver for Blackfin"); +MODULE_LICENSE("GPL"); + +module_init(bfin_cpu_init); +module_exit(bfin_cpu_exit); -- cgit v0.10.2