From 86a8280a7fe007d61b05fa8a352edc0595283dad Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:57:20 +0200 Subject: m68k: Assorted spelling fixes - s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S index fa31be2..73d92ea 100644 --- a/arch/m68k/coldfire/head.S +++ b/arch/m68k/coldfire/head.S @@ -288,7 +288,7 @@ _clear_bss: #endif /* - * Assember start up done, start code proper. + * Assembler start up done, start code proper. */ jsr start_kernel /* start Linux kernel */ diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c index c525e4c..9abb1a4 100644 --- a/arch/m68k/coldfire/m5272.c +++ b/arch/m68k/coldfire/m5272.c @@ -111,7 +111,7 @@ void __init config_BSP(char *commandp, int size) /***************************************************************************/ /* - * Some 5272 based boards have the FEC ethernet diectly connected to + * Some 5272 based boards have the FEC ethernet directly connected to * an ethernet switch. In this case we need to use the fixed phy type, * and we need to declare it early in boot. */ diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c index 821de92..6a640be 100644 --- a/arch/m68k/coldfire/pci.c +++ b/arch/m68k/coldfire/pci.c @@ -42,7 +42,7 @@ static unsigned long iospace; /* * We need to be carefull probing on bus 0 (directly connected to host - * bridge). We should only acccess the well defined possible devices in + * bridge). We should only access the well defined possible devices in * use, ignore aliases and the like. */ static unsigned char mcf_host_slot2sid[32] = { diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 78cb60f..9bbffeb 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -10191,7 +10191,7 @@ xdnrm_con: xdnrm_sd: mov.l %a1,-(%sp) tst.b LOCAL_EX(%a0) # is denorm pos or neg? - smi.b %d1 # set d0 accodingly + smi.b %d1 # set d0 accordingly bsr.l unf_sub mov.l (%sp)+,%a1 xdnrm_exit: @@ -10990,7 +10990,7 @@ src_qnan_m: # routines where an instruction is selected by an index into # a large jump table corresponding to a given instruction which # has been decoded. Flow continues here where we now decode -# further accoding to the source operand type. +# further according to the source operand type. # global fsinh @@ -23196,14 +23196,14 @@ m_sign: # # 1. Branch on the sign of the adjusted exponent. # 2p.(positive exp) -# 2. Check M16 and the digits in lwords 2 and 3 in decending order. +# 2. Check M16 and the digits in lwords 2 and 3 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Subtract the count from the exp. # 5. Check if the exp has crossed zero in #3 above; make the exp abs # and set SE. # 6. Multiply the mantissa by 10**count. # 2n.(negative exp) -# 2. Check the digits in lwords 3 and 2 in decending order. +# 2. Check the digits in lwords 3 and 2 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Add the count to the exp. # 5. Check if the exp has crossed zero in #3 above; clear SE. diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 4aedef9..3535e6c 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -13156,14 +13156,14 @@ m_sign: # # 1. Branch on the sign of the adjusted exponent. # 2p.(positive exp) -# 2. Check M16 and the digits in lwords 2 and 3 in decending order. +# 2. Check M16 and the digits in lwords 2 and 3 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Subtract the count from the exp. # 5. Check if the exp has crossed zero in #3 above; make the exp abs # and set SE. # 6. Multiply the mantissa by 10**count. # 2n.(negative exp) -# 2. Check the digits in lwords 3 and 2 in decending order. +# 2. Check the digits in lwords 3 and 2 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Add the count to the exp. # 5. Check if the exp has crossed zero in #3 above; clear SE. diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index 429fe26..208b4da 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -18,7 +18,7 @@ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) * * APR/18/2002 : added proper support for MCF5272 DMA controller. diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h index f186459..699f20c 100644 --- a/arch/m68k/include/asm/m525xsim.h +++ b/arch/m68k/include/asm/m525xsim.h @@ -123,10 +123,10 @@ /* * I2C module. */ -#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */ +#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base address I2C0 */ #define MCFI2C_SIZE0 0x20 /* Register set size */ -#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ +#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base address I2C1 */ #define MCFI2C_SIZE1 0x20 /* Register set size */ /* diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h index 26cc3d5..8824236 100644 --- a/arch/m68k/include/asm/mcfmmu.h +++ b/arch/m68k/include/asm/mcfmmu.h @@ -38,7 +38,7 @@ /* * MMU Operation register. */ -#define MMUOR_UAA 0x00000001 /* Update allocatiom address */ +#define MMUOR_UAA 0x00000001 /* Update allocation address */ #define MMUOR_ACC 0x00000002 /* TLB access */ #define MMUOR_RD 0x00000004 /* TLB access read */ #define MMUOR_WR 0x00000000 /* TLB access write */ diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h index fc5b362..c48d21b 100644 --- a/arch/m68k/include/asm/q40_master.h +++ b/arch/m68k/include/asm/q40_master.h @@ -1,6 +1,6 @@ /* * Q40 master Chip Control - * RTC stuff merged for compactnes.. + * RTC stuff merged for compactness. */ #ifndef _Q40_MASTER_H diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 4d2adfb..7990b6f 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -60,7 +60,7 @@ * * The host talks to the IOPs using a rather simple message-passing scheme via * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each - * channel is conneced to a specific software driver on the IOP. For example + * channel is connected to a specific software driver on the IOP. For example * on the SCC IOP there is one channel for each serial port. Each channel has * an incoming and and outgoing message queue with a depth of one. * diff --git a/arch/m68k/math-emu/fp_decode.h b/arch/m68k/math-emu/fp_decode.h index 759679d..6d1e760 100644 --- a/arch/m68k/math-emu/fp_decode.h +++ b/arch/m68k/math-emu/fp_decode.h @@ -130,7 +130,7 @@ do_fscc=0 bfextu %d2{#13,#3},%d0 .endm -| decode the 8bit diplacement from the brief extension word +| decode the 8bit displacement from the brief extension word .macro fp_decode_disp8 move.b %d2,%d0 ext.w %d0 -- cgit v0.10.2