From e33936451484b06b61b259172fa3761a7d1cd4dc Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 15:03:55 -0600 Subject: Kbuild: centralize MKIMAGE and cmd_uimage definitions All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib to avoid duplication. All ARCHs have similar definitions of cmd_uimage. Place a sufficiently parameterized version in Makefile.lib to avoid duplication. Signed-off-by: Stephen Warren Acked-by: Nicolas Pitre Tested-by: Mike Frysinger [Blackfin] Tested-by: Michal Simek [Microblaze] Tested-by: Guan Xuetao [unicore32] Signed-off-by: Michal Marek diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index fc871e7..c877087 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -11,8 +11,6 @@ # Copyright (C) 1995-2002 Russell King # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif @@ -69,22 +67,19 @@ $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) clean-files := *.dtb -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(STARTADDR) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ - -ifeq ($(CONFIG_ZBOOT_ROM),y) -$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) +ifneq ($(LOADADDR),) + UIMAGE_LOADADDR=$(LOADADDR) else -$(obj)/uImage: LOADADDR=$(ZRELADDR) + ifeq ($(CONFIG_ZBOOT_ROM),y) + UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) + else + UIMAGE_LOADADDR=$(ZRELADDR) + endif endif -$(obj)/uImage: STARTADDR=$(LOADADDR) - check_for_multiple_loadaddr = \ -if [ $(words $(LOADADDR)) -gt 1 ]; then \ - echo 'multiple load addresses: $(LOADADDR)'; \ +if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \ echo 'This is incompatible with uImages'; \ echo 'Specify LOADADDR on the commandline to build an uImage'; \ false; \ diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile index 1848bf0..2a3b539 100644 --- a/arch/avr32/boot/images/Makefile +++ b/arch/avr32/boot/images/Makefile @@ -6,8 +6,6 @@ # for more details. # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - extra-y := vmlinux.bin vmlinux.gz OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id @@ -17,10 +15,9 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T kernel \ - -C gzip -a $(CONFIG_LOAD_ADDRESS) -e $(CONFIG_ENTRY_ADDRESS) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ +UIMAGE_LOADADDR = $(CONFIG_LOAD_ADDRESS) +UIMAGE_ENTRYADDR = $(CONFIG_ENTRY_ADDRESS) +UIMAGE_COMPRESSION = gzip targets += uImage uImage.srec $(obj)/uImage: $(obj)/vmlinux.gz diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index 0a49279..f7d27d5 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -6,20 +6,17 @@ # for more details. # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip -UIMAGE_OPTS-y := -UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD) -UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n '$(CPU_REV)-$(KERNELRELEASE)' \ - -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ - $(UIMAGE_OPTS-y) -d $< $@ +ifeq ($(CONFIG_RAMKERNEL),y) +UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD) +else # CONFIG_ROMKERNEL must be set +UIMAGE_LOADADDR = $(CONFIG_ROM_BASE) +endif +UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') +UIMAGE_NAME = '$(CPU_REV)-$(KERNELRELEASE)' +UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -x $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 0c796cf..ca76ecd 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,8 +2,6 @@ # arch/microblaze/boot/Makefile # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - obj-y += linked_dtb.o targets := linux.bin linux.bin.gz simpleImage.% @@ -35,11 +33,9 @@ quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \ -K _fdt_start vmlinux -o $@ -quiet_cmd_uimage = UIMAGE $@.ub - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \ - -C none -n 'Linux-$(KERNELRELEASE)' \ - -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \ - -d $@ $@.ub +UIMAGE_IN = $@ +UIMAGE_OUT = $@.ub +UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR) $(obj)/simpleImage.%: vmlinux FORCE $(call if_changed,cp,.unstrip) diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index e4ea31a..58592df 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -8,8 +8,6 @@ # Copyright (C) 1999 Stuart Menefy # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - # # Assign safe dummy values if these variables are not defined, # in order to suppress error message. @@ -61,10 +59,8 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $(KERNEL_MEMORY) + \ $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ +UIMAGE_LOADADDR = $(KERNEL_LOAD) +UIMAGE_ENTRYADDR = $(KERNEL_ENTRY) $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index 9205416..d56d199 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -5,7 +5,6 @@ ROOT_IMG := /usr/src/root.img ELFTOAOUT := elftoaout -MKIMAGE := $(srctree)/scripts/mkuboot.sh hostprogs-y := piggyback btfixupprep targets := tftpboot.img btfix.o btfix.S image zImage vmlinux.aout @@ -92,11 +91,9 @@ $(obj)/image.bin: $(obj)/image FORCE $(obj)/image.gz: $(obj)/image.bin $(call if_changed,gzip) -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sparc -O linux -T kernel \ - -C gzip -a $(CONFIG_UBOOT_LOAD_ADDR) \ - -e $(CONFIG_UBOOT_ENTRY_ADDR) -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ +UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR) +UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR) +UIMAGE_COMPRESSION = gzip quiet_cmd_uimage.o = UIMAGE.O $@ cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \ diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile index 79e5f88..ec7fb70 100644 --- a/arch/unicore32/boot/Makefile +++ b/arch/unicore32/boot/Makefile @@ -11,8 +11,6 @@ # Copyright (C) 2001~2010 GUAN Xue-tao # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - targets := Image zImage uImage $(obj)/Image: vmlinux FORCE @@ -26,14 +24,8 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) @echo ' Kernel: $@ is ready' -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A unicore -O linux -T kernel \ - -C none -a $(LOADADDR) -e $(STARTADDR) \ - -n 'Linux-$(KERNELRELEASE)' -d $< $@ - -$(obj)/uImage: LOADADDR=0x0 - -$(obj)/uImage: STARTADDR=$(LOADADDR) +UIMAGE_ARCH = unicore +UIMAGE_LOADADDR = 0x0 $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 00c368c..0be6f11 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -304,6 +304,30 @@ cmd_lzo = (cat $(filter-out FORCE,$^) | \ lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ (rm -f $@ ; false) +# U-Boot mkimage +# --------------------------------------------------------------------------- + +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces +# the number of overrides in arch makefiles +UIMAGE_ARCH ?= $(SRCARCH) +UIMAGE_COMPRESSION ?= $(if $(2),$(2),none) +UIMAGE_OPTS-y ?= +UIMAGE_TYPE ?= kernel +UIMAGE_LOADADDR ?= arch_must_set_this +UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) +UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)' +UIMAGE_IN ?= $< +UIMAGE_OUT ?= $@ + +quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT) + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ + -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ + -T $(UIMAGE_TYPE) \ + -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ + -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT) + # XZ # --------------------------------------------------------------------------- # Use xzkern to compress the kernel image and xzmisc to compress other things. -- cgit v0.10.2