From cedc8ef87c3349a6645e285f920715380dd25ddc Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Tue, 24 Jul 2012 17:26:34 +0200 Subject: MIPS: Netlogic: Update comments in smpboot.S No change in logic, comments update and whitespace cleanup. * A few comments in the file were in assembler style and the rest int C style, convert all of them to C style. * Mark workarounds for Ax silicon with a macro XLP_AX_WORKAROUND * Whitespace fixes - use tabs consistently * rename __config_lsu macro to xlp_config_lsu Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3749/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S index c138b1a..c4872a7 100644 --- a/arch/mips/netlogic/common/smpboot.S +++ b/arch/mips/netlogic/common/smpboot.S @@ -54,28 +54,36 @@ XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ SYS_CPU_NONCOHERENT_MODE * 4 -.macro __config_lsu - li t0, LSU_DEFEATURE - mfcr t1, t0 +#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */ - lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */ - or t1, t1, t2 - li t2, ~0xe /* S1RCM */ +/* Enable XLP features and workarounds in the LSU */ +.macro xlp_config_lsu + li t0, LSU_DEFEATURE + mfcr t1, t0 + + lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */ + or t1, t1, t2 +#ifdef XLP_AX_WORKAROUND + li t2, ~0xe /* S1RCM */ and t1, t1, t2 +#endif mtcr t1, t0 - li t0, SCHED_DEFEATURE - lui t1, 0x0100 /* Experimental: Disable BRU accepting ALU ops */ - mtcr t1, t0 +#ifdef XLP_AX_WORKAROUND + li t0, SCHED_DEFEATURE + lui t1, 0x0100 /* Disable BRU accepting ALU ops */ + mtcr t1, t0 +#endif .endm /* - * The cores can come start when they are woken up. This is also the NMI - * entry, so check that first. + * This is the code that will be copied to the reset entry point for + * XLR and XLP. The XLP cores start here when they are woken up. This + * is also the NMI entry point. * - * The data corresponding to reset is stored at RESET_DATA_PHYS location, - * this will have the thread mask (used when core is woken up) and the - * current NMI handler in case we reached here for an NMI. + * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS + * location, this will have the thread mask (used when core is woken up) + * and the current NMI handler in case we reached here for an NMI. * * When a core or thread is newly woken up, it loops in a 'wait'. When * the CPU really needs waking up, we send an NMI to it, with the NMI @@ -89,12 +97,12 @@ FEXPORT(nlm_reset_entry) dmtc0 k0, $22, 6 dmtc0 k1, $22, 7 - mfc0 k0, CP0_STATUS - li k1, 0x80000 - and k1, k0, k1 - beqz k1, 1f /* go to real reset entry */ + mfc0 k0, CP0_STATUS + li k1, 0x80000 + and k1, k0, k1 + beqz k1, 1f /* go to real reset entry */ nop - li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ + li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ ld k0, BOOT_NMI_HANDLER(k1) jr k0 nop @@ -114,21 +122,23 @@ FEXPORT(nlm_reset_entry) li t2, SYS_CPU_COHERENT_BASE(0) add t2, t2, t3 /* t2 <- SYS offset for node */ lw t1, 0(t2) - and t1, t1, t0 - sw t1, 0(t2) + and t1, t1, t0 + sw t1, 0(t2) /* read back to ensure complete */ - lw t1, 0(t2) + lw t1, 0(t2) sync /* Configure LSU on Non-0 Cores. */ - __config_lsu + xlp_config_lsu + /* FALL THROUGH */ /* * Wake up sibling threads from the initial thread in * a core. */ EXPORT(nlm_boot_siblings) + /* Enable hw threads by writing to MAP_THREADMODE of the core */ li t0, CKSEG1ADDR(RESET_DATA_PHYS) lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) @@ -139,13 +149,14 @@ EXPORT(nlm_boot_siblings) /* * The new hardware thread starts at the next instruction * For all the cases other than core 0 thread 0, we will - * jump to the secondary wait function. - */ + * jump to the secondary wait function. + */ mfc0 v0, CP0_EBASE, 1 andi v0, 0x7f /* v0 <- node/core */ -#if 1 - /* A0 errata - Write MMU_SETUP after changing thread mode register. */ + /* Init MMU in the first thread after changing THREAD_MODE + * register (Ax Errata?) + */ andi v1, v0, 0x3 /* v1 <- thread id */ bnez v1, 2f nop @@ -154,9 +165,8 @@ EXPORT(nlm_boot_siblings) li t1, 0 mtcr t1, t0 ehb -#endif -2: beqz v0, 4f +2: beqz v0, 4f /* boot cpu (cpuid == 0)? */ nop /* setup status reg */ @@ -183,9 +193,9 @@ EXPORT(nlm_boot_siblings) * For the boot CPU, we have to restore registers and * return */ -4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ +4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ li t1, 0xfadebeef - dmtc0 t1, $4, 2 /* restore SP from UserLocal */ + dmtc0 t1, $4, 2 /* restore SP from UserLocal */ PTR_SUBU sp, t0, PT_SIZE RESTORE_ALL jr ra @@ -193,7 +203,7 @@ EXPORT(nlm_boot_siblings) EXPORT(nlm_reset_entry_end) FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */ - __config_lsu + xlp_config_lsu dmtc0 sp, $4, 2 /* SP saved in UserLocal */ SAVE_ALL sync @@ -234,36 +244,36 @@ END(nlm_boot_secondary_cpus) */ __CPUINIT NESTED(nlm_rmiboot_preboot, 16, sp) - mfc0 t0, $15, 1 # read ebase - andi t0, 0x1f # t0 has the processor_id() - andi t2, t0, 0x3 # thread no - sll t0, 2 # offset in cpu array + mfc0 t0, $15, 1 /* read ebase */ + andi t0, 0x1f /* t0 has the processor_id() */ + andi t2, t0, 0x3 /* thread num */ + sll t0, 2 /* offset in cpu array */ - PTR_LA t1, nlm_cpu_ready # mark CPU ready + PTR_LA t1, nlm_cpu_ready /* mark CPU ready */ PTR_ADDU t1, t0 li t3, 1 sw t3, 0(t1) - bnez t2, 1f # skip thread programming - nop # for non zero hw threads + bnez t2, 1f /* skip thread programming */ + nop /* for thread id != 0 */ /* - * MMU setup only for first thread in core + * XLR MMU setup only for first thread in core */ li t0, 0x400 mfcr t1, t0 - li t2, 6 # XLR thread mode mask + li t2, 6 /* XLR thread mode mask */ nor t3, t2, zero - and t2, t1, t2 # t2 - current thread mode + and t2, t1, t2 /* t2 - current thread mode */ li v0, CKSEG1ADDR(RESET_DATA_PHYS) - lw v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode + lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */ sll v1, 1 - beq v1, t2, 1f # same as request value - nop # nothing to do */ + beq v1, t2, 1f /* same as request value */ + nop /* nothing to do */ - and t2, t1, t3 # mask out old thread mode - or t1, t2, v1 # put in new value - mtcr t1, t0 # update core control + and t2, t1, t3 /* mask out old thread mode */ + or t1, t2, v1 /* put in new value */ + mtcr t1, t0 /* update core control */ 1: wait j 1b -- cgit v0.10.2