From 80546ac51396bd1d2e37cc78c7bed44c08f90352 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 10 Oct 2013 19:19:15 +1100 Subject: powerpc/powernv: Add support for indirect XSCOM via debugfs Indirect XSCOM addresses normally have the top bit set (of the 64-bit address). This doesn't work via the normal debugfs interface, so we use a different encoding, which we need to convert before calling OPAL. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 09a90d8..4d99a8f 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -71,11 +71,33 @@ static int opal_xscom_err_xlate(int64_t rc) } } +static u64 opal_scom_unmangle(u64 reg) +{ + /* + * XSCOM indirect addresses have the top bit set. Additionally + * the reset of the top 3 nibbles is always 0. + * + * Because the debugfs interface uses signed offsets and shifts + * the address left by 3, we basically cannot use the top 4 bits + * of the 64-bit address, and thus cannot use the indirect bit. + * + * To deal with that, we support the indirect bit being in bit + * 4 (IBM notation) instead of bit 0 in this API, we do the + * conversion here. To leave room for further xscom address + * expansion, we only clear out the top byte + * + */ + if (reg & (1ull << 59)) + reg = (reg & ~(0xffull << 56)) | (1ull << 63); + return reg; +} + static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) { struct opal_scom_map *m = map; int64_t rc; + reg = opal_scom_unmangle(reg); rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value)); return opal_xscom_err_xlate(rc); } @@ -85,6 +107,7 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value) struct opal_scom_map *m = map; int64_t rc; + reg = opal_scom_unmangle(reg); rc = opal_xscom_write(m->chip, m->addr + reg, value); return opal_xscom_err_xlate(rc); } -- cgit v0.10.2