From 100d4a9d20015315bf4215d11c2cf4b1f30c33b8 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 15 Mar 2011 16:24:24 +0100 Subject: usb: musb: clear AUTOSET while clearing DMAENAB On the completion of tx dma, dma is disabled by clearing MUSB_TXCSR_DMAENAB in TXCSR. If MUSB_TXCSR_AUTOSET was set in txstate() it will remain set although it is not needed in PIO mode. Clear it as soon as it is not needed. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 98519c5..9ecb057 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum) is_dma = 1; csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN | - MUSB_TXCSR_TXPKTRDY); + MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET); musb_writew(epio, MUSB_TXCSR, csr); /* Ensure writebuffer is empty. */ csr = musb_readw(epio, MUSB_TXCSR); -- cgit v0.10.2 From 8726606424738ca0341e1bb93ebac956d80f6d29 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 15 Mar 2011 16:24:29 +0100 Subject: usb: musb: ux500: copy dma mask from platform device to musb device musb code checks dma mask before calling dma hooks. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d6384e4..f7e04bf 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev) } musb->dev.parent = &pdev->dev; + musb->dev.dma_mask = pdev->dev.dma_mask; + musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; glue->dev = &pdev->dev; glue->musb = musb; -- cgit v0.10.2 From ec63bf6c06b01ceeb6048a2b9fa9e73060259307 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Mar 2011 14:14:36 +0300 Subject: USB: musb: add missing unlock in cppi_interrupt() We should unlock before returning here. Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index de55a3c..6385eeb 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1167,8 +1167,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG); rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG); - if (!tx && !rx) + if (!tx && !rx) { + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); return IRQ_NONE; + } DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx); -- cgit v0.10.2 From aca7f353219abfb7b8a1530fbba1b1acf0e30da4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Mar 2011 14:15:24 +0300 Subject: USB: musb: using 0 instead of NULL Sparse complains (and rightly so): drivers/usb/musb/cppi_dma.c:1458:33: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 6385eeb..0db0f5e 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1455,7 +1455,7 @@ static int cppi_channel_abort(struct dma_channel *channel) * compare mode by writing 1 to the tx_complete register. */ cppi_reset_tx(tx_ram, 1); - cppi_ch->head = 0; + cppi_ch->head = NULL; musb_writel(&tx_ram->tx_complete, 0, 1); cppi_dump_tx(5, cppi_ch, " (done teardown)"); -- cgit v0.10.2 From 2fbcf3fa43af809ebf4e4ad33c2f0a17e903385c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Mar 2011 14:16:17 +0300 Subject: USB: musb: silence printk format warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gcc gives the following warnings: drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_tx_segment’: drivers/usb/musb/cppi_dma.c:600: warning: format ‘%x’ expects type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_rx_segment’: drivers/usb/musb/cppi_dma.c:822: warning: format ‘%x’ expects type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_rx_scan’: drivers/usb/musb/cppi_dma.c:1042: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c:1114: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ dma_addr_t is sometimes 32 bit and sometimes 64. We normally cast them to unsigned long long for printk(). Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 0db0f5e..eb9161a 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) length = min(n_bds * maxpacket, length); } - DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n", + DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n", tx->index, maxpacket, rndis ? "rndis" : "transparent", n_bds, - addr, length); + (unsigned long long)addr, length); cppi_rndis_update(tx, 0, musb->ctrl_base, rndis); @@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) length = min(n_bds * maxpacket, length); DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) " - "dma 0x%x len %u %u/%u\n", + "dma 0x%llx len %u %u/%u\n", rx->index, maxpacket, onepacket ? (is_rndis ? "rndis" : "onepacket") @@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) musb_readl(tibase, DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4)) & 0xffff, - addr, length, rx->channel.actual_len, rx->buf_len); + (unsigned long long)addr, length, + rx->channel.actual_len, rx->buf_len); /* only queue one segment at a time, since the hardware prevents * correct queue shutdown after unexpected short packets @@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) if (!completed && (bd->hw_options & CPPI_OWN_SET)) break; - DBG(5, "C/RXBD %08x: nxt %08x buf %08x " + DBG(5, "C/RXBD %llx: nxt %08x buf %08x " "off.len %08x opt.len %08x (%d)\n", - bd->dma, bd->hw_next, bd->hw_bufp, + (unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options, rx->channel.actual_len); @@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) musb_ep_select(cppi->mregs, rx->index + 1); csr = musb_readw(regs, MUSB_RXCSR); if (csr & MUSB_RXCSR_DMAENAB) { - DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n", + DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n", rx->index, rx->head, rx->tail, rx->last_processed - ? rx->last_processed->dma + ? (unsigned long long) + rx->last_processed->dma : 0, completed ? ", completed" : "", csr); -- cgit v0.10.2 From 2e10f5e70f670d981f789075e3ebc394f5bb51e3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Mar 2011 14:18:26 +0300 Subject: USB: musb: dereferencing an iomem pointer "tx_ram" points to io memory. We can't dereference it directly. Sparse complains about this: "drivers/usb/musb/cppi_dma.c:1205:25: warning: dereference of noderef expression" Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index eb9161a..ab434fb 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1204,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) */ if (NULL == bd) { DBG(1, "null BD\n"); - tx_ram->tx_complete = 0; + musb_writel(&tx_ram->tx_complete, 0, 0); continue; } -- cgit v0.10.2 From 7a180e70cfc56e131bfe4796773df2acfc7d4180 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 22 Mar 2011 11:31:37 +0200 Subject: usb: musb: temporarily make it bool Due to the recent changes to musb's glue layers, we can't compile musb-hdrc as a module - compilation will break due to undefined symbol musb_debug. In order to fix that, we need a big re-work of the debug support on the MUSB driver. Because that would mean a lot of new code coming into the -rc series, it's best to defer that to next merge window and for now just disable module support for MUSB. Once we get the refactor of the debugging support done, we can simply revert this patch and things will go back to normal again. Cc: stable@kernel.org # v2.6.38 Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 4cbb7e4..74073b3 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -14,7 +14,7 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS - tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' + bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -30,8 +30,8 @@ config USB_MUSB_HDRC If you do not know what this is, please say N. - To compile this driver as a module, choose M here; the - module will be called "musb-hdrc". +# To compile this driver as a module, choose M here; the +# module will be called "musb-hdrc". choice prompt "Platform Glue Layer" -- cgit v0.10.2 From 3d5ad13eac320292f64071ea7ded1b661edd9430 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 22 Mar 2011 11:38:49 +0200 Subject: usb: musb: gadget: check the correct list_head We are now using our own list_head, so we should be checking against that, not the gadget driver's list_head. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9ecb057..6dfbf9f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) } /* if the hardware doesn't have the request, easy ... */ - if (musb_ep->req_list.next != &request->list || musb_ep->busy) + if (musb_ep->req_list.next != &req->list || musb_ep->busy) musb_g_giveback(musb_ep, request, -ECONNRESET); /* ... else abort the dma transfer ... */ -- cgit v0.10.2 From 4f9edd2d7e8dd170d10780532cb76eb5890468b4 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Tue, 22 Mar 2011 16:02:12 +0530 Subject: usb: musb: Fix the crash issue during reboot Below crash observed with commit 7acc6197b76edd0b932a7cbcc6cfad0a8a87f026 (usb: musb: Idle path retention and offmode support for OMAP3) during board reboot. The musb clock was disabled when musb_shutdown() was called by platform_drv_shutdown in which there are register accesses. call pm_runtime_get_sync() and pm_runtime_put_sync() in the musb_shutdown function. / # [ 172.368774] Unhandled fault: imprecise external abort (0x1406) at 0x400f0000 [ 172.376190] Internal error: : 1406 [#1] SMP [ 172.380554] last sysfs file: /sys/devices/platform/omap/omap_i2c.4/i2c-4/i2c-dev/i2c-4/dev [ 172.389221] Modules linked in: [ 172.392456] CPU: 0 Tainted: G W (2.6.38-06671-geddecbb #33) [ 172.399475] PC is at do_raw_spin_unlock+0x50/0xc0 [ 172.404418] LR is at _raw_spin_unlock_irqrestore+0x24/0x44 [ 172.410186] pc : [] lr : [] psr: 60000093 [ 172.410186] sp : ee993e40 ip : c0d00240 fp : bea9cf14 [ 172.422241] r10: 00000000 r9 : ee992000 r8 : c04b2fa8 [ 172.427703] r7 : 00000000 r6 : c0fa46c0 r5 : ef966124 r4 : ef966124 [ 172.434539] r3 : ef92cbc0 r2 : ef92cbc0 r1 : 00000000 r0 : ef966124 [ 172.441406] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 172.448974] Control: 10c5387d Table: ae8d804a DAC: 00000015 [ 172.454986] Process init (pid: 1094, stack limit = 0xee9922f8) [ 172.461120] Stack: (0xee993e40 to 0xee994000) [ 172.465667] 3e40: a0000013 c085a7f8 ef966124 a0000013 c0fa46c0 c0761ab4 c0761a70 ef95c008 [ 172.474273] 3e60: ef95c014 c06e2fd0 c06e2fbc c06dea90 00000000 01234567 28121969 c04fccb4 [ 172.482849] 3e80: 00000000 c04fcd04 c0a302bc c04fce44 c0a02600 00000001 00000000 c085cd04 [ 172.491424] 3ea0: 00000000 00000002 c09ea000 c085afc0 ee993f24 00000000 00040001 00000445 [ 172.499999] 3ec0: a8eb9d34 00000027 00000000 00000000 00000000 c0a56a4c 00000000 00000000 [ 172.508575] 3ee0: 00000002 60000093 00000000 c0519aac 00000002 00000080 00000000 c0550420 [ 172.517150] 3f00: 00000000 00000002 ee970000 c0a56a3c c0a56a20 00000002 c0a56a3c 00000000 [ 172.525726] 3f20: c0a56a3c 0000000a c1580e00 c0a56a20 00000002 c0a56a3c c1580e00 c0a56a20 [ 172.534301] 3f40: ef92cbc0 c05173a0 00000001 ef92cbc0 c0576190 c04e3174 20000013 c0517324 [ 172.542877] 3f60: ef815c00 ee90b720 c04e3174 c0576190 00000001 ef92cbc0 c04b2f00 ffffffff [ 172.551483] 3f80: 00000058 c0517324 00000000 00000000 ffffffff 00000000 00000000 ffffffff [ 172.560058] 3fa0: 00000058 c04b2de0 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 172.568634] 3fc0: 00000000 00000000 ffffffff 00000058 00000000 00000001 400aa000 bea9cf14 [ 172.577209] 3fe0: 000ea148 bea9c958 000aa750 40225728 60000010 fee1dead 00000000 00000000 [ 172.585784] [] (do_raw_spin_unlock+0x50/0xc0) from [] (_raw_spin_unlock_irqrestore+0x24/0x44) [ 172.596588] [] (_raw_spin_unlock_irqrestore+0x24/0x44) from [] (musb_shutdown+0x44/0x88) [ 172.606933] [] (musb_shutdown+0x44/0x88) from [] (platform_drv_shutdown+0x14/0x18) [ 172.616699] [] (platform_drv_shutdown+0x14/0x18) from [] (device_shutdown+0x74/0xb4) [ 172.626647] [] (device_shutdown+0x74/0xb4) from [] (kernel_restart_prepare+0x24/0x38) [ 172.636688] [] (kernel_restart_prepare+0x24/0x38) from [] (kernel_restart+0xc/0x48) [ 172.646545] [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xfc/0x1d8) [ 172.655426] [] (sys_reboot+0xfc/0x1d8) from [] (ret_fast_syscall+0x0/0x3c) [ 172.664459] Code: e3c3303f e594200c e593300c e1520003 (0a000002) [ 172.670867] ------------[ cut here ]------------ Signed-off-by: Hema HK Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 630ae7f..f10ff00 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev) struct musb *musb = dev_to_musb(&pdev->dev); unsigned long flags; + pm_runtime_get_sync(musb->controller); spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); @@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); + pm_runtime_put(musb->controller); /* FIXME power down */ } -- cgit v0.10.2 From 132543074af3cf1e94e3608abf162880edbdcbb3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Mar 2011 22:48:54 -0400 Subject: USB: musb: blackfin: work around anomaly 05000450 DMA mode 1 data corruption anomaly on Blackfin systems. This issue is specific to the Blackfin silicon as the bug appears to be related to the connection of the musb ip to the bus/dma fabric. Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105) DMA mode 1 allows large size transfers to generate a single interrupt at the end of the entire transfer. The transfer is split up in packets of length specified in the Maximum Packet Size field for that endpoint. If the transfer size is not an integer multiple of the Maximum Packet Size, a short packet will be present at the end of the transfer. Under certain conditions this packet may be corrupted in the USB FIFO. Workaround: Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA mode 0 to transfer the short packet. As an example if your transfer size is 33168 bytes and Maximum Packet Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and the remainder (33168 mod 512) in DMA mode 0. Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 52312e8..8e2a1ff 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -21,6 +21,7 @@ #include #include "musb_core.h" +#include "musbhsdma.h" #include "blackfin.h" struct bfin_glue { @@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode) return -EIO; } +static int bfin_musb_adjust_channel_params(struct dma_channel *channel, + u16 packet_sz, u8 *mode, + dma_addr_t *dma_addr, u32 *len) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + + /* + * Anomaly 05000450 might cause data corruption when using DMA + * MODE 1 transmits with short packet. So to work around this, + * we truncate all MODE 1 transfers down to a multiple of the + * max packet size, and then do the last short packet transfer + * (if there is any) using MODE 0. + */ + if (ANOMALY_05000450) { + if (musb_channel->transmit && *mode == 1) + *len = *len - (*len % packet_sz); + } + + return 0; +} + static void bfin_musb_reg_init(struct musb *musb) { if (ANOMALY_05000346) { @@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = { .vbus_status = bfin_musb_vbus_status, .set_vbus = bfin_musb_set_vbus, + + .adjust_channel_params = bfin_musb_adjust_channel_params, }; static u64 bfin_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 4bd9e21..0e053b5 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -261,6 +261,7 @@ enum musb_g_ep0_state { * @try_ilde: tries to idle the IP * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status + * @channel_program: pre check for standard dma channel_program func */ struct musb_platform_ops { int (*init)(struct musb *musb); @@ -274,6 +275,10 @@ struct musb_platform_ops { int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); + + int (*adjust_channel_params)(struct dma_channel *channel, + u16 packet_sz, u8 *mode, + dma_addr_t *dma_addr, u32 *len); }; /* diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 0144a2d..d281792 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + /* Let targets check/tweak the arguments */ + if (musb->ops->adjust_channel_params) { + int ret = musb->ops->adjust_channel_params(channel, + packet_sz, &mode, &dma_addr, &len); + if (ret) + return ret; + } + /* * The DMA engine in RTL1.8 and above cannot handle * DMA addresses that are not aligned to a 4 byte boundary. -- cgit v0.10.2 From d06847fec256f4f902075ce5986e10f7c55fa250 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 15 Mar 2011 17:09:10 -0700 Subject: usb: fix ips1760-hcd printk format warning Fix printk format build warning and grammar typo on same line. drivers/usb/host/isp1760-hcd.c:300: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index f50e84a..795345a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -295,7 +295,7 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) } dev_err(hcd->self.controller, - "%s: Can not allocate %lu bytes of memory\n" + "%s: Cannot allocate %zu bytes of memory\n" "Current memory map:\n", __func__, qtd->length); for (i = 0; i < BLOCKS; i++) { -- cgit v0.10.2 From 00cc7a5faf25b3ba5cf30fcffc62249bdd152006 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 16 Mar 2011 21:54:05 +0200 Subject: USB: usb-gadget: unlock data->lock mutex on error path in ep_read() ep_read() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 3ed73f4..a01383f 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -386,8 +386,10 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) /* halt any endpoint by doing a "wrong direction" i/o call */ if (usb_endpoint_dir_in(&data->desc)) { - if (usb_endpoint_xfer_isoc(&data->desc)) + if (usb_endpoint_xfer_isoc(&data->desc)) { + mutex_unlock(&data->lock); return -EINVAL; + } DBG (data->dev, "%s halt\n", data->name); spin_lock_irq (&data->dev->lock); if (likely (data->ep != NULL)) -- cgit v0.10.2 From 0291303d37585ab9056bae9fac1d1e13ae1ce913 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 4 Apr 2011 11:35:05 +0200 Subject: usb: Fix Kconfig unmet dependencies for Microblaze EHCI Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig Warning log: warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 851b3bf..eccdefe 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,7 +6,6 @@ config MICROBLAZE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD - select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE select HAVE_ARCH_KGDB diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 41b6e51..006489d 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_VT8500 default y if PLAT_SPEAR default y if ARCH_MSM + default y if MICROBLAZE default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. -- cgit v0.10.2 From 2c2da1799ba776c4bd8d51ee46d9f00cb4cc6120 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 4 Apr 2011 13:09:22 +0900 Subject: usb: r8a66597-udc: fix spinlock usage Because the disconnect function in the composite driver will call spin_lock, this driver has to call spin_unlock before calling driver->disconnet(). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 0151185..6dcc1f6 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1083,7 +1083,9 @@ static void irq_device_state(struct r8a66597 *r8a66597) if (dvsq == DS_DFLT) { /* bus reset */ + spin_unlock(&r8a66597->lock); r8a66597->driver->disconnect(&r8a66597->gadget); + spin_lock(&r8a66597->lock); r8a66597_update_usb_speed(r8a66597); } if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG) -- cgit v0.10.2 From 5a9443f08c83c294c5c806a689c1184b27cb26b3 Mon Sep 17 00:00:00 2001 From: Christian Simon Date: Mon, 28 Mar 2011 21:54:47 +0200 Subject: USB: ftdi_sio: Added IDs for CTI USB Serial Devices I added new ProdutIds for two devices from CTI GmbH Leipzig. Signed-off-by: Christian Simon Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a973c7a..8a02407 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -151,6 +151,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = { * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! */ static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index c543e55..770b5dd 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1141,3 +1141,12 @@ #define QIHARDWARE_VID 0x20B7 #define MILKYMISTONE_JTAGSERIAL_PID 0x0713 +/* + * CTI GmbH RS485 Converter http://www.cti-lean.com/ + */ +/* USB-485-Mini*/ +#define FTDI_CTI_MINI_PID 0xF608 +/* USB-Nano-485*/ +#define FTDI_CTI_NANO_PID 0xF60B + + -- cgit v0.10.2 From 505d1f69ec4f8697a74711fb3a01ed151fda3834 Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Tue, 5 Apr 2011 16:55:25 +0300 Subject: usb: gadget: eem: fix echo command processing During processing of bunch of eem frames if "echo" command is found skb is cloned and the cloned version should be used to send reply. Unfortunately, the data of the original skb were actually used and the cloned skb is never freed. Using the cloned skb and freeing the skb in the completion callback for usb request. Signed-off-by: Yauheni Kaliuta Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 95dd466..b3c3042 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -314,6 +314,9 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f) static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req) { + struct sk_buff *skb = (struct sk_buff *)req->context; + + dev_kfree_skb_any(skb); } /* @@ -428,10 +431,11 @@ static int eem_unwrap(struct gether *port, skb_trim(skb2, len); put_unaligned_le16(BIT(15) | BIT(11) | len, skb_push(skb2, 2)); - skb_copy_bits(skb, 0, req->buf, skb->len); - req->length = skb->len; + skb_copy_bits(skb2, 0, req->buf, skb2->len); + req->length = skb2->len; req->complete = eem_cmd_complete; req->zero = 1; + req->context = skb2; if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC)) DBG(cdev, "echo response queue fail\n"); break; -- cgit v0.10.2 From 94ae4976e253757e9b03a44d27d41b20f1829d80 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 5 Apr 2011 13:36:15 -0400 Subject: USB: EHCI: unlink unused QHs when the controller is stopped This patch (as1458) fixes a problem affecting ultra-reliable systems: When hardware failover of an EHCI controller occurs, the data structures do not get released correctly. This is because the routine responsible for removing unused QHs from the async schedule assumes the controller is running properly (the frame counter is used in determining how long the QH has been idle) -- but when a failover causes the controller to be electronically disconnected from the PCI bus, obviously it stops running. The solution is simple: Allow scan_async() to remove a QH from the async schedule if it has been idle for long enough _or_ if the controller is stopped. Signed-off-by: Alan Stern Reported-and-Tested-by: Dan Duval CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 98ded66..42abd0f 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1247,24 +1247,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) static void scan_async (struct ehci_hcd *ehci) { + bool stopped; struct ehci_qh *qh; enum ehci_timer_action action = TIMER_IO_WATCHDOG; ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index); timer_action_done (ehci, TIMER_ASYNC_SHRINK); rescan: + stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state); qh = ehci->async->qh_next.qh; if (likely (qh != NULL)) { do { /* clean any finished work for this qh */ - if (!list_empty (&qh->qtd_list) - && qh->stamp != ehci->stamp) { + if (!list_empty(&qh->qtd_list) && (stopped || + qh->stamp != ehci->stamp)) { int temp; /* unlinks could happen here; completion * reporting drops the lock. rescan using * the latest schedule, but don't rescan - * qhs we already finished (no looping). + * qhs we already finished (no looping) + * unless the controller is stopped. */ qh = qh_get (qh); qh->stamp = ehci->stamp; @@ -1285,9 +1288,9 @@ rescan: */ if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { - if (!ehci->reclaim - && ((ehci->stamp - qh->stamp) & 0x1fff) - >= (EHCI_SHRINK_FRAMES * 8)) + if (!ehci->reclaim && (stopped || + ((ehci->stamp - qh->stamp) & 0x1fff) + >= EHCI_SHRINK_FRAMES * 8)) start_unlink_async(ehci, qh); else action = TIMER_ASYNC_SHRINK; -- cgit v0.10.2 From 36a52c009a39049893c9a3a4091f8f8f48585f47 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 5 Apr 2011 19:50:34 +0200 Subject: usb: musb: omap2430: fix build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix build failure introduced by commit 7acc6197b76edd0b932a7cbcc6cfad0a8a87f026 (usb: musb: Idle path retention and offmode support for OMAP3) when building without gadget support. CC drivers/usb/musb/omap2430.o drivers/usb/musb/omap2430.c: In function ‘musb_otg_notifications’: drivers/usb/musb/omap2430.c:262: error: ‘struct musb’ has no member named ‘gadget_driver’ Signed-off-by: Johan Hovold Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 25cb8b0..57a27fa 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -259,9 +259,10 @@ static int musb_otg_notifications(struct notifier_block *nb, case USB_EVENT_VBUS: DBG(4, "VBUS Connect\n"); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC if (musb->gadget_driver) pm_runtime_get_sync(musb->controller); - +#endif otg_init(musb->xceiv); break; -- cgit v0.10.2 From 11a31d84129dc3133417d626643d714c9df5317e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 8 Apr 2011 17:38:22 +0200 Subject: USB: ftdi_sio: add PID for OCT DK201 docking station Add PID 0x0103 for serial port of the OCT DK201 docking station. Reported-by: Jan Hoogenraad Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8a02407..51b7801 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -527,6 +527,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, { USB_DEVICE(OCT_VID, OCT_US101_PID) }, + { USB_DEVICE(OCT_VID, OCT_DK201_PID) }, { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID), .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk }, { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 770b5dd..0bdba7a 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -572,6 +572,7 @@ /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* -- cgit v0.10.2 From 0fdf65c3394358a3634ad1064ea4984a03a6aa07 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 11 Apr 2011 21:56:39 +0900 Subject: USB: ohci-au1xxx: fix warning "__BIG_ENDIAN" is not defined In file included from drivers/usb/host/ohci-hcd.c:1028:0: drivers/usb/host/ohci-au1xxx.c:36:7: warning: "__BIG_ENDIAN" is not defined Signed-off-by: Yoichi Yuasa Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 17a6043..958d985f 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -33,7 +33,7 @@ #ifdef __LITTLE_ENDIAN #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C) -#elif __BIG_ENDIAN +#elif defined(__BIG_ENDIAN) #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \ USBH_ENABLE_BE) #else -- cgit v0.10.2 From 16a2f970f3b4beb8d21009b2c45b9b5ab56bb621 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 11 Apr 2011 20:44:30 +0200 Subject: usb/gadget: don't leak hs_descriptors We should free both descriptors. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 9abecfd..0111f8a 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -706,6 +706,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f) struct f_audio *audio = func_to_audio(f); usb_free_descriptors(f->descriptors); + usb_free_descriptors(f->hs_descriptors); kfree(audio); } -- cgit v0.10.2 From 9ab7927bb845cf2549110b19c212fe44a2bfbacb Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 13 Apr 2011 08:38:16 +0200 Subject: USB host: Fix lockdep warning in AMD PLL quirk Booting latest kernel on my test machine produces a lockdep warning from the usb_amd_find_chipset_info() function: WARNING: at /data/lemmy/linux.trees.git/kernel/lockdep.c:2465 lockdep_trace_alloc+0x95/0xc2() Hardware name: Snook Modules linked in: Pid: 959, comm: work_for_cpu Not tainted 2.6.39-rc2+ #22 Call Trace: [] warn_slowpath_common+0x80/0x98 [] ? T.492+0x24/0x26 [] warn_slowpath_null+0x15/0x17 [] lockdep_trace_alloc+0x95/0xc2 [] slab_pre_alloc_hook+0x18/0x3b [] kmem_cache_alloc_trace+0x25/0xba [] T.492+0x24/0x26 [] pci_get_subsys+0x2e/0x73 [] pci_get_device+0x11/0x13 [] usb_amd_find_chipset_info+0x3f/0x18a ... It turns out that this function calls pci_get_device under a spin_lock with irqs disabled, but the pci_get_device function is only allowed in preemptible context. This patch fixes the warning by making all data-structure modifications on temporal storage and commiting this back into the visible structure at the end. While at it, this patch also moves the pci_dev_put calls out of the spinlocks because this function might sleep too. Signed-off-by: Joerg Roedel Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 1d586d4..9b166d7 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -84,65 +84,92 @@ int usb_amd_find_chipset_info(void) { u8 rev = 0; unsigned long flags; + struct amd_chipset_info info; + int ret; spin_lock_irqsave(&amd_lock, flags); - amd_chipset.probe_count++; /* probe only once */ - if (amd_chipset.probe_count > 1) { + if (amd_chipset.probe_count > 0) { + amd_chipset.probe_count++; spin_unlock_irqrestore(&amd_lock, flags); return amd_chipset.probe_result; } + memset(&info, 0, sizeof(info)); + spin_unlock_irqrestore(&amd_lock, flags); - amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (amd_chipset.smbus_dev) { - rev = amd_chipset.smbus_dev->revision; + info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); + if (info.smbus_dev) { + rev = info.smbus_dev->revision; if (rev >= 0x40) - amd_chipset.sb_type = 1; + info.sb_type = 1; else if (rev >= 0x30 && rev <= 0x3b) - amd_chipset.sb_type = 3; + info.sb_type = 3; } else { - amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, - 0x780b, NULL); - if (!amd_chipset.smbus_dev) { - spin_unlock_irqrestore(&amd_lock, flags); - return 0; + info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x780b, NULL); + if (!info.smbus_dev) { + ret = 0; + goto commit; } - rev = amd_chipset.smbus_dev->revision; + + rev = info.smbus_dev->revision; if (rev >= 0x11 && rev <= 0x18) - amd_chipset.sb_type = 2; + info.sb_type = 2; } - if (amd_chipset.sb_type == 0) { - if (amd_chipset.smbus_dev) { - pci_dev_put(amd_chipset.smbus_dev); - amd_chipset.smbus_dev = NULL; + if (info.sb_type == 0) { + if (info.smbus_dev) { + pci_dev_put(info.smbus_dev); + info.smbus_dev = NULL; } - spin_unlock_irqrestore(&amd_lock, flags); - return 0; + ret = 0; + goto commit; } - amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL); - if (amd_chipset.nb_dev) { - amd_chipset.nb_type = 1; + info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL); + if (info.nb_dev) { + info.nb_type = 1; } else { - amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, - 0x1510, NULL); - if (amd_chipset.nb_dev) { - amd_chipset.nb_type = 2; - } else { - amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, - 0x9600, NULL); - if (amd_chipset.nb_dev) - amd_chipset.nb_type = 3; + info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); + if (info.nb_dev) { + info.nb_type = 2; + } else { + info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x9600, NULL); + if (info.nb_dev) + info.nb_type = 3; } } - amd_chipset.probe_result = 1; + ret = info.probe_result = 1; printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); - spin_unlock_irqrestore(&amd_lock, flags); - return amd_chipset.probe_result; +commit: + + spin_lock_irqsave(&amd_lock, flags); + if (amd_chipset.probe_count > 0) { + /* race - someone else was faster - drop devices */ + + /* Mark that we where here */ + amd_chipset.probe_count++; + ret = amd_chipset.probe_result; + + spin_unlock_irqrestore(&amd_lock, flags); + + if (info.nb_dev) + pci_dev_put(info.nb_dev); + if (info.smbus_dev) + pci_dev_put(info.smbus_dev); + + } else { + /* no race - commit the result */ + info.probe_count++; + amd_chipset = info; + spin_unlock_irqrestore(&amd_lock, flags); + } + + return ret; } EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); @@ -284,6 +311,7 @@ EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable); void usb_amd_dev_put(void) { + struct pci_dev *nb, *smbus; unsigned long flags; spin_lock_irqsave(&amd_lock, flags); @@ -294,20 +322,23 @@ void usb_amd_dev_put(void) return; } - if (amd_chipset.nb_dev) { - pci_dev_put(amd_chipset.nb_dev); - amd_chipset.nb_dev = NULL; - } - if (amd_chipset.smbus_dev) { - pci_dev_put(amd_chipset.smbus_dev); - amd_chipset.smbus_dev = NULL; - } + /* save them to pci_dev_put outside of spinlock */ + nb = amd_chipset.nb_dev; + smbus = amd_chipset.smbus_dev; + + amd_chipset.nb_dev = NULL; + amd_chipset.smbus_dev = NULL; amd_chipset.nb_type = 0; amd_chipset.sb_type = 0; amd_chipset.isoc_reqs = 0; amd_chipset.probe_result = 0; spin_unlock_irqrestore(&amd_lock, flags); + + if (nb) + pci_dev_put(nb); + if (smbus) + pci_dev_put(smbus); } EXPORT_SYMBOL_GPL(usb_amd_dev_put); -- cgit v0.10.2 From 485707116b3949ab41e1aba8d74f45a7551e3a65 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Mar 2011 14:09:50 +0300 Subject: usb: pch_udc: unlock on allocation failure There was an unlock missing on the error path. Also I did a small cleanup by changing ep->dev->lock for just dev->lock. They're the same lock, but dev->lock is shorter and that's how it is used for the spin_unlock_irqrestore() call. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 3e4b35e..68dbcc3 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -1608,7 +1608,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, return -EINVAL; if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; - spin_lock_irqsave(&ep->dev->lock, iflags); + spin_lock_irqsave(&dev->lock, iflags); /* map the buffer for dma */ if (usbreq->length && ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { @@ -1625,8 +1625,10 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, DMA_FROM_DEVICE); } else { req->buf = kzalloc(usbreq->length, GFP_ATOMIC); - if (!req->buf) - return -ENOMEM; + if (!req->buf) { + retval = -ENOMEM; + goto probe_end; + } if (ep->in) { memcpy(req->buf, usbreq->buf, usbreq->length); req->dma = dma_map_single(&dev->pdev->dev, -- cgit v0.10.2 From 80f9df3e0093ad9f1eeefd2ff7fd27daaa518d25 Mon Sep 17 00:00:00 2001 From: "Marius B. Kotsbak" Date: Tue, 22 Mar 2011 00:01:53 +0100 Subject: USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem. Bind only modem AT command endpoint to option. Signed-off-by: Marius B. Kotsbak Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 75c7f45..d77ff04 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -407,6 +407,10 @@ static void option_instat_callback(struct urb *urb); /* ONDA MT825UP HSDPA 14.2 modem */ #define ONDA_MT825UP 0x000b +/* Samsung products */ +#define SAMSUNG_VENDOR_ID 0x04e8 +#define SAMSUNG_PRODUCT_GT_B3730 0x6889 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -968,6 +972,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ + { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v0.10.2 From c53c2fab40cf16e13af66f40bfd27200cda98d2f Mon Sep 17 00:00:00 2001 From: Paul Friedrich Date: Fri, 18 Mar 2011 11:13:55 +0100 Subject: USB: ftdi_sio: add ids for Hameg HO720 and HO730 usb serial: ftdi_sio: add two missing USB ID's for Hameg interfaces HO720 and HO730 Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51b7801..4de6ef0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -790,6 +790,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 0bdba7a..efffc237 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -300,6 +300,8 @@ * Hameg HO820 and HO870 interface (using VID 0x0403) */ #define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO730_PID 0xed73 +#define HAMEG_HO720_PID 0xed72 #define HAMEG_HO870_PID 0xed71 /* -- cgit v0.10.2 From 10c9ab15d6aee153968d150c05b3ee3df89673de Mon Sep 17 00:00:00 2001 From: Steven Hardy Date: Mon, 4 Apr 2011 17:57:37 +0100 Subject: usb: Fix qcserial memory leak on rmmod qcprobe function allocates serial->private but this is never freed, this patch adds a new function qc_release() which frees serial->private, after calling usb_wwan_release Signed-off-by: Steven Hardy Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8858201..6e3b933 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -205,6 +205,18 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) return retval; } +static void qc_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); + + dbg("%s", __func__); + + /* Call usb_wwan release & free the private data allocated in qcprobe */ + usb_wwan_release(serial); + usb_set_serial_data(serial, NULL); + kfree(priv); +} + static struct usb_serial_driver qcdevice = { .driver = { .owner = THIS_MODULE, @@ -222,7 +234,7 @@ static struct usb_serial_driver qcdevice = { .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, .disconnect = usb_wwan_disconnect, - .release = usb_wwan_release, + .release = qc_release, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, -- cgit v0.10.2 From 99ab3f9e4eaec35fd2d7159c31b71f17f7e613e3 Mon Sep 17 00:00:00 2001 From: Steven Hardy Date: Mon, 4 Apr 2011 17:59:55 +0100 Subject: usb: qcserial avoid pointing to freed memory Rework the qcprobe logic such that serial->private is not set when qcprobe exits with -ENODEV, otherwise serial->private will point to freed memory on -ENODEV Signed-off-by: Steven Hardy Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 6e3b933..cd63864 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -111,7 +111,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) ifnum = intf->desc.bInterfaceNumber; dbg("This Interface = %d", ifnum); - data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) return -ENOMEM; @@ -134,8 +134,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { dbg("QDL port found"); - if (serial->interface->num_altsetting == 1) - return 0; + if (serial->interface->num_altsetting == 1) { + retval = 0; /* Success */ + break; + } retval = usb_set_interface(serial->dev, ifnum, 1); if (retval < 0) { @@ -145,7 +147,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) retval = -ENODEV; kfree(data); } - return retval; } break; @@ -177,7 +178,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) retval = -ENODEV; kfree(data); } - return retval; } else if (ifnum==3) { /* * NMEA (serial line 9600 8N1) @@ -199,9 +199,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) dev_err(&serial->dev->dev, "unknown number of interfaces: %d\n", nintf); kfree(data); - return -ENODEV; + retval = -ENODEV; } + /* Set serial->private if not returning -ENODEV */ + if (retval != -ENODEV) + usb_set_serial_data(serial, data); return retval; } -- cgit v0.10.2 From cb62d65f966146a39fdde548cb474dacf1d00fa5 Mon Sep 17 00:00:00 2001 From: Steven Hardy Date: Mon, 4 Apr 2011 18:02:25 +0100 Subject: usb: qcserial add missing errorpath kfrees There are two -ENODEV error paths in qcprobe where the allocated private data is not freed, this patch adds the two missing kfrees to avoid leaking memory on the error path Signed-off-by: Steven Hardy Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index cd63864..54a9dab 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -167,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } } else if (ifnum == 2) { dbg("Modem port found"); @@ -191,6 +192,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } } break; -- cgit v0.10.2 From d834508e159fe8936f9e7fd941b1e2fe9a209d4b Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 23 Mar 2011 17:47:00 +0100 Subject: USB: fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0 The driver did not take the zero flag in the USB request. If the request length is the same as the endpoint's maxpacket, an additional ZLP with no data has to be transmitted. The method used here is inspired to what is done in fsl_udc_core.c (and pxa27x_udc.c and at91_udc.c) where this is supported. There already was a discussion about this topic with people from Keymile, and I propose here a better implementation: http://thread.gmane.org/gmane.linux.usb.general/38951 Signed-off-by: Valentin Longchamp Acked-by: Li Yang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index aee7e3c..36613b3 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1148,6 +1148,12 @@ static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame) static int txcomplete(struct qe_ep *ep, unsigned char restart) { if (ep->tx_req != NULL) { + struct qe_req *req = ep->tx_req; + unsigned zlp = 0, last_len = 0; + + last_len = min_t(unsigned, req->req.length - ep->sent, + ep->ep.maxpacket); + if (!restart) { int asent = ep->last; ep->sent += asent; @@ -1156,9 +1162,18 @@ static int txcomplete(struct qe_ep *ep, unsigned char restart) ep->last = 0; } + /* zlp needed when req->re.zero is set */ + if (req->req.zero) { + if (last_len == 0 || + (req->req.length % ep->ep.maxpacket) != 0) + zlp = 0; + else + zlp = 1; + } else + zlp = 0; + /* a request already were transmitted completely */ - if ((ep->tx_req->req.length - ep->sent) <= 0) { - ep->tx_req->req.actual = (unsigned int)ep->sent; + if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) { done(ep, ep->tx_req, 0); ep->tx_req = NULL; ep->last = 0; @@ -1191,6 +1206,7 @@ static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame) buf = (u8 *)ep->tx_req->req.buf + ep->sent; if (buf && size) { ep->last = size; + ep->tx_req->req.actual += size; frame_set_data(frame, buf); frame_set_length(frame, size); frame_set_status(frame, FRAME_OK); -- cgit v0.10.2 From 5808544690300071f09eef9ab83a0fb1f60cf1cd Mon Sep 17 00:00:00 2001 From: Richard Retanubun Date: Thu, 17 Mar 2011 17:39:28 -0400 Subject: USB: isp1760-hcd: move imask clear after pending work is done This patch moves the HcInterrupt register write to clear the pending interrupt to after the isr work is done, doing this removes glitches in the irq line. Signed-off-by: Richard Retanubun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 795345a..564b033 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1676,13 +1676,15 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) if (unlikely(!imask)) goto leave; - reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); if (imask & (HC_ATL_INT | HC_SOT_INT)) do_atl_int(hcd); if (imask & HC_INTL_INT) do_intl_int(hcd); + /* Clear interrupt mask on device after the work is done */ + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); + irqret = IRQ_HANDLED; leave: spin_unlock(&priv->lock); -- cgit v0.10.2 From 2868a2b1ba8f9c7f6c4170519ebb6c62934df70e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 18 Mar 2011 21:29:01 -0700 Subject: USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices Isochronous and interrupt SuperSpeed endpoints use the same mechanisms for decoding bInterval values as HighSpeed ones so adjust the code accordingly. Also bandwidth reservation for SuperSpeed matches highspeed, not low/full speed. Signed-off-by: Dmitry Torokhov Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index a3d2e23..96fdfb8 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, break; case USB_ENDPOINT_XFER_INT: type = "Int."; - if (speed == USB_SPEED_HIGH) + if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER) interval = 1 << (desc->bInterval - 1); else interval = desc->bInterval; @@ -229,7 +229,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, default: /* "can't happen" */ return start; } - interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000; + interval *= (speed == USB_SPEED_HIGH || + speed == USB_SPEED_SUPER) ? 125 : 1000; if (interval % 1000) unit = 'u'; else { @@ -542,8 +543,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, if (level == 0) { int max; - /* high speed reserves 80%, full/low reserves 90% */ - if (usbdev->speed == USB_SPEED_HIGH) + /* super/high speed reserves 80%, full/low reserves 90% */ + if (usbdev->speed == USB_SPEED_HIGH || + usbdev->speed == USB_SPEED_SUPER) max = 800; else max = FRAME_TIME_MAX_USECS_ALLOC; -- cgit v0.10.2 From 5a6c2f3ff039154872ce597952f8b8900ea0d732 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 20 Mar 2011 02:15:17 -0700 Subject: USB: xhci - fix unsafe macro definitions Macro arguments used in expressions need to be enclosed in parenthesis to avoid unpleasant surprises. This should be queued for kernels back to 2.6.31 Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 07e2630..91b1a23 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -232,7 +232,7 @@ struct xhci_op_regs { * notification type that matches a bit set in this bit field. */ #define DEV_NOTE_MASK (0xffff) -#define ENABLE_DEV_NOTE(x) (1 << x) +#define ENABLE_DEV_NOTE(x) (1 << (x)) /* Most of the device notification types should only be used for debug. * SW does need to pay attention to function wake notifications. */ @@ -601,11 +601,11 @@ struct xhci_ep_ctx { #define EP_STATE_STOPPED 3 #define EP_STATE_ERROR 4 /* Mult - Max number of burtst within an interval, in EP companion desc. */ -#define EP_MULT(p) ((p & 0x3) << 8) +#define EP_MULT(p) (((p) & 0x3) << 8) /* bits 10:14 are Max Primary Streams */ /* bit 15 is Linear Stream Array */ /* Interval - period between requests to an endpoint - 125u increments. */ -#define EP_INTERVAL(p) ((p & 0xff) << 16) +#define EP_INTERVAL(p) (((p) & 0xff) << 16) #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff)) #define EP_MAXPSTREAMS_MASK (0x1f << 10) #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) -- cgit v0.10.2 From 22e0487047567252d5677ff35766cd884375efc2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 17 Mar 2011 22:39:49 +0300 Subject: USB: xhci: unsigned char never equals -1 There were some places that compared port_speed == -1 where port_speed is a u8. This doesn't work unless we cast the -1 to u8. Some places did it correctly. Instead of using -1 directly, I've created a DUPLICATE_ENTRY define which does the cast and is more descriptive as well. Signed-off-by: Dan Carpenter Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a003e79..ab7fc2b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, * Skip ports that don't have known speeds, or have duplicate * Extended Capabilities port speed entries. */ - if (port_speed == 0 || port_speed == -1) + if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) continue; /* @@ -1727,12 +1727,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, * found a similar duplicate. */ if (xhci->port_array[i] != major_revision && - xhci->port_array[i] != (u8) -1) { + xhci->port_array[i] != DUPLICATE_ENTRY) { if (xhci->port_array[i] == 0x03) xhci->num_usb3_ports--; else xhci->num_usb2_ports--; - xhci->port_array[i] = (u8) -1; + xhci->port_array[i] = DUPLICATE_ENTRY; } /* FIXME: Should we disable the port? */ continue; @@ -1831,7 +1831,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < num_ports; i++) { if (xhci->port_array[i] == 0x03 || xhci->port_array[i] == 0 || - xhci->port_array[i] == -1) + xhci->port_array[i] == DUPLICATE_ENTRY) continue; xhci->usb2_ports[port_index] = diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cfc1ad9..c6d1462 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1209,7 +1209,7 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, * Skip ports that don't have known speeds, or have duplicate * Extended Capabilities port speed entries. */ - if (port_speed == 0 || port_speed == -1) + if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) continue; /* @@ -1260,7 +1260,7 @@ static void handle_port_status(struct xhci_hcd *xhci, port_id); goto cleanup; } - if (major_revision == (u8) -1) { + if (major_revision == DUPLICATE_ENTRY) { xhci_warn(xhci, "Event for port %u duplicated in" "Extended Capabilities, ignoring.\n", port_id); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 91b1a23..bdb78f5 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -348,6 +348,9 @@ struct xhci_op_regs { /* Initiate a warm port reset - complete when PORT_WRC is '1' */ #define PORT_WR (1 << 31) +/* We mark duplicate entries with -1 */ +#define DUPLICATE_ENTRY ((u8)(-1)) + /* Port Power Management Status and Control - port_power_base bitmasks */ /* Inactivity timer value for transitions into U1, in microseconds. * Timeout can be up to 127us. 0xFF means an infinite timeout. -- cgit v0.10.2 From 575688e1e5f462c44ddd608ce3ec9f38b64c3c0d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 20 Mar 2011 02:15:16 -0700 Subject: USB: xhci - remove excessive 'inline' markings Remove 'inline' markings from file-local functions and let compiler do its job and inline what makes sense for given architecture. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ab7fc2b..7f56c9b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval * is set to 0. */ -static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, +static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, struct usb_host_endpoint *ep) { unsigned int interval = 0; @@ -1041,7 +1041,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, * transaction opportunities per microframe", but that goes in the Max Burst * endpoint context field. */ -static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, +static u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { if (udev->speed != USB_SPEED_SUPER || @@ -1050,7 +1050,7 @@ static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, return ep->ss_ep_comp.bmAttributes; } -static inline u32 xhci_get_endpoint_type(struct usb_device *udev, +static u32 xhci_get_endpoint_type(struct usb_device *udev, struct usb_host_endpoint *ep) { int in; @@ -1084,7 +1084,7 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev, * Basically, this is the maxpacket size, multiplied by the burst size * and mult size. */ -static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, +static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, struct usb_device *udev, struct usb_host_endpoint *ep) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c6d1462..0161eb0 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -93,7 +93,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, /* Does this link TRB point to the first segment in a ring, * or was the previous TRB the last TRB on the last segment in the ERST? */ -static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, +static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == xhci->event_ring) @@ -107,7 +107,7 @@ static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring * segment? I.e. would the updated event TRB pointer step off the end of the * event seg? */ -static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, +static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == xhci->event_ring) @@ -116,7 +116,7 @@ static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK); } -static inline int enqueue_is_link_trb(struct xhci_ring *ring) +static int enqueue_is_link_trb(struct xhci_ring *ring) { struct xhci_link_trb *link = &ring->enqueue->link; return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)); @@ -592,7 +592,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, ep->ep_state |= SET_DEQ_PENDING; } -static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, +static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, struct xhci_virt_ep *ep) { ep->ep_state &= ~EP_HALT_PENDING; -- cgit v0.10.2 From 926008c9386dde09b015753b6681c502177baa30 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Mar 2011 20:47:05 -0700 Subject: USB: xhci: simplify logic of skipping missed isoc TDs The logic of the handling Missed Service Error Events was pretty confusing as we were checking the same condition several times. In addition, it caused compiler warning since the compiler could not figure out that event_trb is actually unused in case we are skipping current TD. Fix that by rearranging "skip" condition checks, and factor out skip_isoc_td() so that it is called explicitly. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0161eb0..b69a0a1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1675,71 +1675,52 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, struct urb_priv *urb_priv; int idx; int len = 0; - int skip_td = 0; union xhci_trb *cur_trb; struct xhci_segment *cur_seg; + struct usb_iso_packet_descriptor *frame; u32 trb_comp_code; + bool skip_td = false; ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); trb_comp_code = GET_COMP_CODE(event->transfer_len); urb_priv = td->urb->hcpriv; idx = urb_priv->td_cnt; + frame = &td->urb->iso_frame_desc[idx]; - if (ep->skip) { - /* The transfer is partly done */ - *status = -EXDEV; - td->urb->iso_frame_desc[idx].status = -EXDEV; - } else { - /* handle completion code */ - switch (trb_comp_code) { - case COMP_SUCCESS: - td->urb->iso_frame_desc[idx].status = 0; - xhci_dbg(xhci, "Successful isoc transfer!\n"); - break; - case COMP_SHORT_TX: - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - td->urb->iso_frame_desc[idx].status = - -EREMOTEIO; - else - td->urb->iso_frame_desc[idx].status = 0; - break; - case COMP_BW_OVER: - td->urb->iso_frame_desc[idx].status = -ECOMM; - skip_td = 1; - break; - case COMP_BUFF_OVER: - case COMP_BABBLE: - td->urb->iso_frame_desc[idx].status = -EOVERFLOW; - skip_td = 1; - break; - case COMP_STALL: - td->urb->iso_frame_desc[idx].status = -EPROTO; - skip_td = 1; - break; - case COMP_STOP: - case COMP_STOP_INVAL: - break; - default: - td->urb->iso_frame_desc[idx].status = -1; - break; - } - } - - /* calc actual length */ - if (ep->skip) { - td->urb->iso_frame_desc[idx].actual_length = 0; - /* Update ring dequeue pointer */ - while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); - return finish_td(xhci, td, event_trb, event, ep, status, true); + /* handle completion code */ + switch (trb_comp_code) { + case COMP_SUCCESS: + frame->status = 0; + xhci_dbg(xhci, "Successful isoc transfer!\n"); + break; + case COMP_SHORT_TX: + frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? + -EREMOTEIO : 0; + break; + case COMP_BW_OVER: + frame->status = -ECOMM; + skip_td = true; + break; + case COMP_BUFF_OVER: + case COMP_BABBLE: + frame->status = -EOVERFLOW; + skip_td = true; + break; + case COMP_STALL: + frame->status = -EPROTO; + skip_td = true; + break; + case COMP_STOP: + case COMP_STOP_INVAL: + break; + default: + frame->status = -1; + break; } - if (trb_comp_code == COMP_SUCCESS || skip_td == 1) { - td->urb->iso_frame_desc[idx].actual_length = - td->urb->iso_frame_desc[idx].length; - td->urb->actual_length += - td->urb->iso_frame_desc[idx].length; + if (trb_comp_code == COMP_SUCCESS || skip_td) { + frame->actual_length = frame->length; + td->urb->actual_length += frame->length; } else { for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; cur_trb != event_trb; @@ -1755,7 +1736,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, TRB_LEN(event->transfer_len); if (trb_comp_code != COMP_STOP_INVAL) { - td->urb->iso_frame_desc[idx].actual_length = len; + frame->actual_length = len; td->urb->actual_length += len; } } @@ -1766,6 +1747,35 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, return finish_td(xhci, td, event_trb, event, ep, status, false); } +static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, + struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; + struct usb_iso_packet_descriptor *frame; + int idx; + + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + urb_priv = td->urb->hcpriv; + idx = urb_priv->td_cnt; + frame = &td->urb->iso_frame_desc[idx]; + + /* The transfer is partly done */ + *status = -EXDEV; + frame->status = -EXDEV; + + /* calc actual length */ + frame->actual_length = 0; + + /* Update ring dequeue pointer */ + while (ep_ring->dequeue != td->last_trb) + inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring, false); + + return finish_td(xhci, td, NULL, event, ep, status, true); +} + /* * Process bulk and interrupt tds, update urb status and actual_length. */ @@ -2024,36 +2034,42 @@ static int handle_tx_event(struct xhci_hcd *xhci, } td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, td->last_trb, event_dma); - if (event_seg && ep->skip) { + if (!event_seg) { + if (!ep->skip || + !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { + /* HC is busted, give up! */ + xhci_err(xhci, + "ERROR Transfer event TRB DMA ptr not " + "part of current TD\n"); + return -ESHUTDOWN; + } + + ret = skip_isoc_td(xhci, td, event, ep, &status); + goto cleanup; + } + + if (ep->skip) { xhci_dbg(xhci, "Found td. Clear skip flag.\n"); ep->skip = false; } - if (!event_seg && - (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) { - /* HC is busted, give up! */ - xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " - "part of current TD\n"); - return -ESHUTDOWN; - } - if (event_seg) { - event_trb = &event_seg->trbs[(event_dma - - event_seg->dma) / sizeof(*event_trb)]; - /* - * No-op TRB should not trigger interrupts. - * If event_trb is a no-op TRB, it means the - * corresponding TD has been cancelled. Just ignore - * the TD. - */ - if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK) - == TRB_TYPE(TRB_TR_NOOP)) { - xhci_dbg(xhci, "event_trb is a no-op TRB. " - "Skip it\n"); - goto cleanup; - } + event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / + sizeof(*event_trb)]; + /* + * No-op TRB should not trigger interrupts. + * If event_trb is a no-op TRB, it means the + * corresponding TD has been cancelled. Just ignore + * the TD. + */ + if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_TR_NOOP)) { + xhci_dbg(xhci, + "event_trb is a no-op TRB. Skip it\n"); + goto cleanup; } /* Now update the urb's actual_length and give back to -- cgit v0.10.2 From dfa49c4ad120a784ef1ff0717168aa79f55a483a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Mar 2011 22:41:23 -0700 Subject: USB: xhci - fix math in xhci_get_endpoint_interval() When parsing exponent-expressed intervals we subtract 1 from the value and then expect it to match with original + 1, which is highly unlikely, and we end with frequent spew: usb 3-4: ep 0x83 - rounding interval to 512 microframes Also, parsing interval for fullspeed isochronous endpoints was incorrect - according to USB spec they use exponent-based intervals (but xHCI spec claims frame-based intervals). I trust USB spec more, especially since USB core agrees with it. This should be queued for stable kernels back to 2.6.31. Reviewed-by: Micah Elizabeth Scott Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 7f56c9b..627f343 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return 0; } +/* + * Convert interval expressed as 2^(bInterval - 1) == interval into + * straight exponent value 2^n == interval. + * + */ +static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval; + + interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; + if (interval != ep->desc.bInterval - 1) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d microframes\n", + ep->desc.bEndpointAddress, + 1 << interval); + + return interval; +} + +/* + * Convert bInterval expressed in frames (in 1-255 range) to exponent of + * microframes, rounded down to nearest power of 2. + */ +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval; + + interval = fls(8 * ep->desc.bInterval) - 1; + interval = clamp_val(interval, 3, 10); + if ((1 << interval) != 8 * ep->desc.bInterval) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", + ep->desc.bEndpointAddress, + 1 << interval, + 8 * ep->desc.bInterval); + + return interval; +} + /* Return the polling or NAK interval. * * The polling interval is expressed in "microframes". If xHCI's Interval field @@ -991,45 +1032,38 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, case USB_SPEED_HIGH: /* Max NAK rate */ if (usb_endpoint_xfer_control(&ep->desc) || - usb_endpoint_xfer_bulk(&ep->desc)) + usb_endpoint_xfer_bulk(&ep->desc)) { interval = ep->desc.bInterval; + break; + } /* Fall through - SS and HS isoc/int have same decoding */ + case USB_SPEED_SUPER: if (usb_endpoint_xfer_int(&ep->desc) || - usb_endpoint_xfer_isoc(&ep->desc)) { - if (ep->desc.bInterval == 0) - interval = 0; - else - interval = ep->desc.bInterval - 1; - if (interval > 15) - interval = 15; - if (interval != ep->desc.bInterval + 1) - dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n", - ep->desc.bEndpointAddress, 1 << interval); + usb_endpoint_xfer_isoc(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); } break; - /* Convert bInterval (in 1-255 frames) to microframes and round down to - * nearest power of 2. - */ + case USB_SPEED_FULL: + if (usb_endpoint_xfer_int(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); + break; + } + /* + * Fall through for isochronous endpoint interval decoding + * since it uses the same rules as low speed interrupt + * endpoints. + */ + case USB_SPEED_LOW: if (usb_endpoint_xfer_int(&ep->desc) || - usb_endpoint_xfer_isoc(&ep->desc)) { - interval = fls(8*ep->desc.bInterval) - 1; - if (interval > 10) - interval = 10; - if (interval < 3) - interval = 3; - if ((1 << interval) != 8*ep->desc.bInterval) - dev_warn(&udev->dev, - "ep %#x - rounding interval" - " to %d microframes, " - "ep desc says %d microframes\n", - ep->desc.bEndpointAddress, - 1 << interval, - 8*ep->desc.bInterval); + usb_endpoint_xfer_isoc(&ep->desc)) { + + interval = xhci_parse_frame_interval(udev, ep); } break; + default: BUG(); } -- cgit v0.10.2 From 386139d7c8f22d4983ca89de35d339cc41bb0996 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 24 Mar 2011 08:02:58 -0700 Subject: xhci: Fix NULL pointer deref in handle_port_status() When we get a port status change event, we need to figure out what type of port it came from: a USB 3.0 port, or a USB 2.0/1.1 port. We can't know which usb_hcd to use until that point, so hcd will be NULL for part of the function. Unfortunately, if any of the sanity checks fail, we'll jump to the cleanup label before hcd is set to a valid pointer, and then we'll attempt to tell the USB core to kick the hcd, which is NULL. Skip kicking the roothub if the sanity checks fail. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b69a0a1..b0b4cc3 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1235,6 +1235,7 @@ static void handle_port_status(struct xhci_hcd *xhci, u8 major_revision; struct xhci_bus_state *bus_state; u32 __iomem **port_array; + bool bogus_port_status = false; /* Port status change events always have a successful completion code */ if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { @@ -1247,6 +1248,7 @@ static void handle_port_status(struct xhci_hcd *xhci, max_ports = HCS_MAX_PORTS(xhci->hcs_params1); if ((port_id <= 0) || (port_id > max_ports)) { xhci_warn(xhci, "Invalid port id %d\n", port_id); + bogus_port_status = true; goto cleanup; } @@ -1258,12 +1260,14 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_warn(xhci, "Event for port %u not in " "Extended Capabilities, ignoring.\n", port_id); + bogus_port_status = true; goto cleanup; } if (major_revision == DUPLICATE_ENTRY) { xhci_warn(xhci, "Event for port %u duplicated in" "Extended Capabilities, ignoring.\n", port_id); + bogus_port_status = true; goto cleanup; } @@ -1335,6 +1339,13 @@ cleanup: /* Update event ring dequeue pointer before dropping the lock */ inc_deq(xhci, xhci->event_ring, true); + /* Don't make the USB core poll the roothub if we got a bad port status + * change event. Besides, at that point we can't tell which roothub + * (USB 2.0 or USB 3.0) to kick. + */ + if (bogus_port_status) + return; + spin_unlock(&xhci->lock); /* Pass this up to the core */ usb_hcd_poll_rh_status(hcd); -- cgit v0.10.2 From 2dea75d96ade3c7cd2bfe73f99c7b3291dc3d03a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 12 Apr 2011 23:06:28 -0700 Subject: USB: xhci - also free streams when resetting devices Currently, when resetting a device, xHCI driver disables all but one endpoints and frees their rings, but leaves alone any streams that might have been allocated. Later, when users try to free allocated streams, we oops in xhci_setup_no_streams_ep_input_ctx() because ep->ring is NULL. Let's free not only rings but also stream data as well, so that calling free_streams() on a device that was reset will be safe. This should be queued for stable trees back to 2.6.35. Reviewed-by: Micah Elizabeth Scott Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 196e018..48706c0 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2386,10 +2386,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Everything but endpoint 0 is disabled, so free or cache the rings. */ last_freed_endpoint = 1; for (i = 1; i < 31; ++i) { - if (!virt_dev->eps[i].ring) - continue; - xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); - last_freed_endpoint = i; + struct xhci_virt_ep *ep = &virt_dev->eps[i]; + + if (ep->ep_state & EP_HAS_STREAMS) { + xhci_free_stream_info(xhci, ep->stream_info); + ep->stream_info = NULL; + ep->ep_state &= ~EP_HAS_STREAMS; + } + + if (ep->ring) { + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + last_freed_endpoint = i; + } } xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); -- cgit v0.10.2 From b214f191d95ba4b5a35aebd69cd129cf7e3b1884 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 28 Sep 2010 00:57:32 -0400 Subject: USB: Fix unplug of device with active streams If I unplug a device while the UAS driver is loaded, I get an oops in usb_free_streams(). This is because usb_unbind_interface() calls usb_disable_interface() which calls usb_disable_endpoint() which sets ep_out and ep_in to NULL. Then the UAS driver calls usb_pipe_endpoint() which returns a NULL pointer and passes an array of NULL pointers to usb_free_streams(). I think the correct fix for this is to check for the NULL pointer in usb_free_streams() rather than making the driver check for this situation. My original patch for this checked for dev->state == USB_STATE_NOTATTACHED, but the call to usb_disable_interface() is conditional, so not all drivers would want this check. Note from Sarah Sharp: This patch does avoid a potential dereference, but the real fix (which will be implemented later) is to set the .soft_unbind flag in the usb_driver structure for the UAS driver, and all drivers that allocate streams. The driver should free any streams when it is unbound from the interface. This avoids leaking stream rings in the xHCI driver when usb_disable_interface() is called. This should be queued for stable trees back to 2.6.35. Signed-off-by: Matthew Wilcox Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8eed05d2..77a7fae 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1908,7 +1908,7 @@ void usb_free_streams(struct usb_interface *interface, /* Streams only apply to bulk endpoints. */ for (i = 0; i < num_eps; i++) - if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc)) return; hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); -- cgit v0.10.2 From a8f08d86dbf1b7bb5869cf1807d2fd40ec9d6d0a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Thu, 31 Mar 2011 14:56:50 +0800 Subject: usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub This patch clear PORT_POWER when suspend a USB3.0 device behind a USB3.0 external hub, so the system can suspend and resume. Note USB3.0 device may not work after system resume and this is a temporary workaround. The correct fix will be in future patches. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8fb7549..93720bdc 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2285,7 +2285,17 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) } /* see 7.1.7.6 */ - status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); + /* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0 + * external hub. + * FIXME: this is a temporary workaround to make the system able + * to suspend/resume. + */ + if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev)) + status = clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_POWER); + else + status = set_port_feature(hub->hdev, port1, + USB_PORT_FEAT_SUSPEND); if (status) { dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); -- cgit v0.10.2 From fedd383e33f9ba9b91626f72c593ea327403bf59 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 12 Apr 2011 17:43:19 -0700 Subject: xhci: Tell USB core both roothubs lost power. On a resume, when the power is lost during hibernate, the USB core will call hub_reset_resume for the xHCI USB 2.0 roothub, but not for the USB 3.0 roothub: [ 164.748310] usb usb1: root hub lost power or was reset [ 164.748353] usb usb2: root hub lost power or was reset [ 164.748487] usb usb3: root hub lost power or was reset [ 164.748488] xhci_hcd 0000:01:00.0: Stop HCD ... [ 164.870039] hub 4-0:1.0: hub_resume ... [ 164.870054] hub 3-0:1.0: hub_reset_resume This causes issues later, because the USB core assumes the USB 3.0 hub attached to the USB 3.0 roothub is still active. It attempts to queue a control URB for the external hub, which fails because all the device slot contexts were released when the USB 3.0 roothub lost power: [ 164.980044] hub 4-1:1.0: hub_resume [ 164.980047] xhci_hcd 0000:01:00.0: Get port status returned 0x10101 [ 164.980049] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980053] hub 3-0:1.0: port 1: status 0101 change 0001 [ 164.980056] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980060] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90008948440, 32'h202e1, 4'hf); [ 164.980062] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980066] xhci_hcd 0000:01:00.0: clear port connect change, actual port 0 status = 0x2e1 [ 164.980069] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980072] xhci_hcd 0000:01:00.0: get port status, actual port 1 status = 0x2a0 [ 164.980074] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980077] xhci_hcd 0000:01:00.0: Get port status returned 0x100 [ 164.980079] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980082] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980085] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980088] hub 4-1:1.0: port 4: status 0000 change 0000 [ 164.980091] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980094] hub 4-1:1.0: activate --> -22 [ 164.980113] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980117] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980119] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980123] hub 4-1:1.0: can't resume port 4, status -22 [ 164.980126] hub 4-1:1.0: port 4 status ffff.ffff after resume, -22 [ 164.980129] usb 4-1.4: can't resume, status -22 [ 164.980131] hub 4-1:1.0: logical disconnect on port 4 This causes issues when a USB 3.0 hard drive is attached to the external USB 3.0 hub when the system is hibernated: [ 6249.849653] sd 8:0:0:0: [sdb] Unhandled error code [ 6249.849659] sd 8:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 6249.849663] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 2a 08 00 00 02 00 [ 6249.849671] end_request: I/O error, dev sdb, sector 10760 Make sure to inform the USB core that *both* xHCI roothubs lost power. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 48706c0..c41358e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -771,7 +771,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { - usb_root_hub_lost_power(hcd->self.root_hub); + /* Let the USB core know _both_ roothubs lost power. */ + usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); + usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); -- cgit v0.10.2 From c41136b05d3fb213a192f76a5688ff83687c1136 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Tue, 22 Mar 2011 17:08:14 +0800 Subject: xHCI: Implement AMD PLL quirk This patch disable the optional PM feature inside the Hudson3 platform under the following conditions: 1. If an isochronous device is connected to xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. The PM feature needs to be disabled to eliminate PLL startup delays when the link comes out of low power state. The performance of DMA data transfer could be impacted if system delay were encountered and in addition to the PLL start up delays. Disabling the PM would leave room for unpredictable system delays in order to guarantee uninterrupted data transfer to isochronous audio or video stream devices that require time sensitive information. If data in an audio/video stream was interrupted then erratic audio or video performance may be encountered. AMD PLL quirk is already implemented in OHCI/EHCI driver. After moving the quirk code to pci-quirks.c and export them, xHCI driver can call it directly without having the quirk implementation in itself. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ceea9f3..a10494c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -114,6 +114,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + /* AMD PLL quirk */ + if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) + xhci->quirks |= XHCI_AMD_PLL_FIX; + /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b0b4cc3..7437386 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -619,6 +619,13 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, /* Only giveback urb when this is the last td in urb */ if (urb_priv->td_cnt == urb_priv->length) { + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_enable(); + } + } usb_hcd_unlink_urb_from_ep(hcd, urb); xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); @@ -1565,8 +1572,17 @@ td_cleanup: urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ - if (urb_priv->td_cnt == urb_priv->length) + if (urb_priv->td_cnt == urb_priv->length) { ret = 1; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--; + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs + == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_enable(); + } + } + } } return ret; @@ -3153,6 +3169,12 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } + if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) { + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_quirk_pll_disable(); + } + xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++; + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c41358e..81b976e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -550,6 +550,9 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + if (xhci->quirks & XHCI_AMD_PLL_FIX) + usb_amd_dev_put(); + xhci_dbg(xhci, "// Disabling event ring interrupts\n"); temp = xhci_readl(xhci, &xhci->op_regs->status); xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index bdb78f5..ba1be6b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -30,6 +30,7 @@ /* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" +#include "pci-quirks.h" /* xHCI PCI Configuration Registers */ #define XHCI_SBRN_OFFSET (0x60) @@ -1279,6 +1280,7 @@ struct xhci_hcd { #define XHCI_LINK_TRB_QUIRK (1 << 0) #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) +#define XHCI_AMD_PLL_FIX (1 << 3) /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ -- cgit v0.10.2 From 753d8534cc190ed144caebc2ea49ab7a43dca662 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 14 Apr 2011 13:37:07 -0700 Subject: Revert "USB: isp1760-hcd: move imask clear after pending work is done" This reverts commit 5808544690300071f09eef9ab83a0fb1f60cf1cd. To quote Richard: I don't think this should be mainlined. It was a misunderstanding on my part. If you see all the other hdc drivers in the same location, they all do the same thing (i.e. clear the interrupt status first, then do the work) that "glitch" I think I saw was actually two back-to-back interrupts. Sebastian (the original author of isp1760) explained it to me a few days after my submission. sorry for the confusion Cc: Richard Retanubun Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 564b033..795345a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1676,15 +1676,13 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd) if (unlikely(!imask)) goto leave; + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); if (imask & (HC_ATL_INT | HC_SOT_INT)) do_atl_int(hcd); if (imask & HC_INTL_INT) do_intl_int(hcd); - /* Clear interrupt mask on device after the work is done */ - reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); - irqret = IRQ_HANDLED; leave: spin_unlock(&priv->lock); -- cgit v0.10.2