From 2226b1c219a18804bc40e32a5d53c287a6c925d9 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:55:32 +0000 Subject: uwb: safely remove all reservations When removing all reservations during shutdown, terminate them first and then wait for any pending timeout work to complete. This prevents the timeout work from running after the reservation has been freed. Signed-off-by: David Vrabel diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index ec6eecb..886f977 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -114,7 +114,8 @@ void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) devaddr = rsv->target.devaddr; uwb_dev_addr_print(target, sizeof(target), &devaddr); - dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); + dev_dbg(dev, "rsv %s %s -> %s: %s\n", + text, owner, target, uwb_rsv_state_str(rsv->state)); } static void uwb_rsv_release(struct kref *kref) @@ -511,8 +512,7 @@ void uwb_rsv_remove(struct uwb_rsv *rsv) if (uwb_rsv_is_owner(rsv)) uwb_rsv_put_stream(rsv); - - del_timer_sync(&rsv->timer); + uwb_dev_put(rsv->owner); if (rsv->target.type == UWB_RSV_TARGET_DEV) uwb_dev_put(rsv->target.dev); @@ -943,13 +943,22 @@ void uwb_rsv_remove_all(struct uwb_rc *rc) mutex_lock(&rc->rsvs_mutex); list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); } /* Cancel any postponed update. */ rc->set_drp_ie_pending = 0; mutex_unlock(&rc->rsvs_mutex); cancel_delayed_work_sync(&rc->rsv_update_work); + flush_workqueue(rc->rsv_workq); + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); } void uwb_rsv_init(struct uwb_rc *rc) -- cgit v0.10.2 From 9a9b1d17ba59b78e4bae67f7a7cf546986a42e7d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:58:02 +0000 Subject: wusb: return -ENOTCONN when resetting a port with no connected device If reading the device descriptor fails during hub_port_init() fails, then the port is disabled, disconnecting the device. The port is then reset at the start of the next init attempt but there is no device to reset. Signed-off-by: David Vrabel diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4b..8e18141 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 95c6fa3..407a9fc 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; -- cgit v0.10.2 From 04c470adb01c62bb9bd663cfc4875cf0a4eb01ab Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 4 Jan 2009 11:13:50 +0800 Subject: uwb: remove unused #include 's Remove unused #include 's in file(s) below, drivers/uwb/allocator.c Signed-off-by: Huang Weiyi Signed-off-by: David Vrabel diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c index c8185e6..c13cec7 100644 --- a/drivers/uwb/allocator.c +++ b/drivers/uwb/allocator.c @@ -15,7 +15,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include #include #include -- cgit v0.10.2 From a5e6ced58d423cb09c4fc0087dcfdb0b5deb5e1c Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 7 Jan 2009 10:54:22 +0000 Subject: wusb: timeout when waiting for ASL/PZL updates in whci-hcd Timeout if an ASL or PZL update doesn't not complete and reset the hardware. Signed-off-by: David Vrabel diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d2..2291c5f 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e72..6afa2e3 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf..7dc85a0 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f..d3543a1 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); -- cgit v0.10.2 From 490dea45d00f01847ebebd007685d564aaf2cd98 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 24 Nov 2008 17:06:57 +0100 Subject: itimers: remove the per-cpu-ish-ness Either we bounce once cacheline per cpu per tick, yielding n^2 bounces or we just bounce a single.. Also, using per-cpu allocations for the thread-groups complicates the per-cpu allocator in that its currently aimed to be a fixed sized allocator and the only possible extention to that would be vmap based, which is seriously constrained on 32 bit archs. So making the per-cpu memory requirement depend on the number of processes is an issue. Lastly, it didn't deal with cpu-hotplug, although admittedly that might be fixable. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 2f3c2d4..ea0ea1a 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -48,6 +48,12 @@ extern struct fs_struct init_fs; .posix_timers = LIST_HEAD_INIT(sig.posix_timers), \ .cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \ .rlim = INIT_RLIMITS, \ + .cputime = { .totals = { \ + .utime = cputime_zero, \ + .stime = cputime_zero, \ + .sum_exec_runtime = 0, \ + .lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock), \ + }, }, \ } extern struct nsproxy init_nsproxy; diff --git a/include/linux/sched.h b/include/linux/sched.h index 4cae9b8..c20943e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -450,6 +450,7 @@ struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; + spinlock_t lock; }; /* Alternate field names when used to cache expirations. */ #define prof_exp stime @@ -465,7 +466,7 @@ struct task_cputime { * used for thread group CPU clock calculations. */ struct thread_group_cputime { - struct task_cputime *totals; + struct task_cputime totals; }; /* @@ -2180,24 +2181,30 @@ static inline int spin_needbreak(spinlock_t *lock) * Thread group CPU time accounting. */ -extern int thread_group_cputime_alloc(struct task_struct *); -extern void thread_group_cputime(struct task_struct *, struct task_cputime *); - -static inline void thread_group_cputime_init(struct signal_struct *sig) +static inline +void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times) { - sig->cputime.totals = NULL; + struct task_cputime *totals = &tsk->signal->cputime.totals; + unsigned long flags; + + spin_lock_irqsave(&totals->lock, flags); + *times = *totals; + spin_unlock_irqrestore(&totals->lock, flags); } -static inline int thread_group_cputime_clone_thread(struct task_struct *curr) +static inline void thread_group_cputime_init(struct signal_struct *sig) { - if (curr->signal->cputime.totals) - return 0; - return thread_group_cputime_alloc(curr); + sig->cputime.totals = (struct task_cputime){ + .utime = cputime_zero, + .stime = cputime_zero, + .sum_exec_runtime = 0, + }; + + spin_lock_init(&sig->cputime.totals.lock); } static inline void thread_group_cputime_free(struct signal_struct *sig) { - free_percpu(sig->cputime.totals); } /* diff --git a/kernel/fork.c b/kernel/fork.c index 7b8f2a7..7087d8c 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -820,14 +820,15 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) int ret; if (clone_flags & CLONE_THREAD) { - ret = thread_group_cputime_clone_thread(current); - if (likely(!ret)) { - atomic_inc(¤t->signal->count); - atomic_inc(¤t->signal->live); - } - return ret; + atomic_inc(¤t->signal->count); + atomic_inc(¤t->signal->live); + return 0; } sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL); + + if (sig) + posix_cpu_timers_init_group(sig); + tsk->signal = sig; if (!sig) return -ENOMEM; @@ -864,8 +865,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim); task_unlock(current->group_leader); - posix_cpu_timers_init_group(sig); - acct_init_pacct(&sig->pacct); tty_audit_fork(sig); diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 157de3a..fa07da9 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -10,76 +10,6 @@ #include /* - * Allocate the thread_group_cputime structure appropriately and fill in the - * current values of the fields. Called from copy_signal() via - * thread_group_cputime_clone_thread() when adding a second or subsequent - * thread to a thread group. Assumes interrupts are enabled when called. - */ -int thread_group_cputime_alloc(struct task_struct *tsk) -{ - struct signal_struct *sig = tsk->signal; - struct task_cputime *cputime; - - /* - * If we have multiple threads and we don't already have a - * per-CPU task_cputime struct (checked in the caller), allocate - * one and fill it in with the times accumulated so far. We may - * race with another thread so recheck after we pick up the sighand - * lock. - */ - cputime = alloc_percpu(struct task_cputime); - if (cputime == NULL) - return -ENOMEM; - spin_lock_irq(&tsk->sighand->siglock); - if (sig->cputime.totals) { - spin_unlock_irq(&tsk->sighand->siglock); - free_percpu(cputime); - return 0; - } - sig->cputime.totals = cputime; - cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id()); - cputime->utime = tsk->utime; - cputime->stime = tsk->stime; - cputime->sum_exec_runtime = tsk->se.sum_exec_runtime; - spin_unlock_irq(&tsk->sighand->siglock); - return 0; -} - -/** - * thread_group_cputime - Sum the thread group time fields across all CPUs. - * - * @tsk: The task we use to identify the thread group. - * @times: task_cputime structure in which we return the summed fields. - * - * Walk the list of CPUs to sum the per-CPU time fields in the thread group - * time structure. - */ -void thread_group_cputime( - struct task_struct *tsk, - struct task_cputime *times) -{ - struct task_cputime *totals, *tot; - int i; - - totals = tsk->signal->cputime.totals; - if (!totals) { - times->utime = tsk->utime; - times->stime = tsk->stime; - times->sum_exec_runtime = tsk->se.sum_exec_runtime; - return; - } - - times->stime = times->utime = cputime_zero; - times->sum_exec_runtime = 0; - for_each_possible_cpu(i) { - tot = per_cpu_ptr(totals, i); - times->utime = cputime_add(times->utime, tot->utime); - times->stime = cputime_add(times->stime, tot->stime); - times->sum_exec_runtime += tot->sum_exec_runtime; - } -} - -/* * Called after updating RLIMIT_CPU to set timer expiration if necessary. */ void update_rlimit_cpu(unsigned long rlim_new) diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index f2773b5..8ab0cef 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -296,6 +296,7 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next) static inline void account_group_user_time(struct task_struct *tsk, cputime_t cputime) { + struct task_cputime *times; struct signal_struct *sig; /* tsk == current, ensure it is safe to use ->signal */ @@ -303,13 +304,11 @@ static inline void account_group_user_time(struct task_struct *tsk, return; sig = tsk->signal; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->utime = cputime_add(times->utime, cputime); - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->utime = cputime_add(times->utime, cputime); + spin_unlock(×->lock); } /** @@ -325,6 +324,7 @@ static inline void account_group_user_time(struct task_struct *tsk, static inline void account_group_system_time(struct task_struct *tsk, cputime_t cputime) { + struct task_cputime *times; struct signal_struct *sig; /* tsk == current, ensure it is safe to use ->signal */ @@ -332,13 +332,11 @@ static inline void account_group_system_time(struct task_struct *tsk, return; sig = tsk->signal; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->stime = cputime_add(times->stime, cputime); - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->stime = cputime_add(times->stime, cputime); + spin_unlock(×->lock); } /** @@ -354,6 +352,7 @@ static inline void account_group_system_time(struct task_struct *tsk, static inline void account_group_exec_runtime(struct task_struct *tsk, unsigned long long ns) { + struct task_cputime *times; struct signal_struct *sig; sig = tsk->signal; @@ -362,11 +361,9 @@ static inline void account_group_exec_runtime(struct task_struct *tsk, if (unlikely(!sig)) return; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->sum_exec_runtime += ns; - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->sum_exec_runtime += ns; + spin_unlock(×->lock); } -- cgit v0.10.2 From 783adf42cf039083dd3c734c07c3bdc707e2bb15 Mon Sep 17 00:00:00 2001 From: Steven Noonan Date: Sun, 11 Jan 2009 01:04:21 -0800 Subject: kernel/fork.c: unused variable 'ret' Removed the unused variable. Signed-off-by: Steven Noonan Signed-off-by: Ingo Molnar diff --git a/kernel/fork.c b/kernel/fork.c index e995899..81da4aa 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -817,7 +817,6 @@ static void posix_cpu_timers_init_group(struct signal_struct *sig) static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) { struct signal_struct *sig; - int ret; if (clone_flags & CLONE_THREAD) { atomic_inc(¤t->signal->count); -- cgit v0.10.2 From c225aa57ff4ffe715df4692676b77c815a337236 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Simon=20Holm=20Th=C3=B8gersen?= Date: Sun, 11 Jan 2009 22:34:01 -0500 Subject: ext4: fix wrong use of do_div MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the following warning: fs/jbd2/journal.c: In function ‘jbd2_seq_info_show’: fs/jbd2/journal.c:850: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘uint32_t’ is caused by wrong usage of do_div that modifies the dividend in-place and returns the quotient. So not only would an incorrect value be displayed, but s->journal->j_average_commit_time would also be changed to a wrong value! Fix it by using div_u64 instead. Signed-off-by: Simon Holm Thøgersen Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 5667530..eb34300 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -37,10 +37,10 @@ #include #include #include +#include #include #include -#include EXPORT_SYMBOL(jbd2_journal_start); EXPORT_SYMBOL(jbd2_journal_restart); @@ -846,8 +846,8 @@ static int jbd2_seq_info_show(struct seq_file *seq, void *v) jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid)); seq_printf(seq, " %ums logging transaction\n", jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid)); - seq_printf(seq, " %luus average transaction commit time\n", - do_div(s->journal->j_average_commit_time, 1000)); + seq_printf(seq, " %lluus average transaction commit time\n", + div_u64(s->journal->j_average_commit_time, 1000)); seq_printf(seq, " %lu handles per transaction\n", s->stats->u.run.rs_handle_count / s->stats->ts_tid); seq_printf(seq, " %lu blocks per transaction\n", -- cgit v0.10.2 From 6d612b0f943289856c6e8186c564cda922cd040e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 12 Jan 2009 12:52:23 +0100 Subject: locking, hpet: annotate false positive warning Alexander Beregalov reported that this warning is caused by the HPET code: > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 comparators, 64-bit 14.318180 MHz counter > ODEBUG: object is on stack, but not annotated > ------------[ cut here ]------------ > WARNING: at lib/debugobjects.c:251 __debug_object_init+0x2a4/0x352() > Bisected down to 26afe5f2fbf06ea0765aaa316640c4dd472310c0 > (x86: HPET_MSI Initialise per-cpu HPET timers) The commit is fine - but the on-stack workqueue entry needs annotation. Reported-and-bisected-by: Alexander Beregalov Signed-off-by: Peter Zijlstra Tested-by: Alexander Beregalov Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index cd759ad..bb2e0f0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -628,7 +628,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n, switch (action & 0xf) { case CPU_ONLINE: - INIT_DELAYED_WORK(&work.work, hpet_work); + INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work); init_completion(&work.complete); /* FIXME: add schedule_work_on() */ schedule_delayed_work_on(cpu, &work.work, 0); diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index b362911..47151c8 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -118,6 +118,12 @@ struct execute_work { init_timer(&(_work)->timer); \ } while (0) +#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \ + do { \ + INIT_WORK(&(_work)->work, (_func)); \ + init_timer_on_stack(&(_work)->timer); \ + } while (0) + #define INIT_DELAYED_WORK_DEFERRABLE(_work, _func) \ do { \ INIT_WORK(&(_work)->work, (_func)); \ -- cgit v0.10.2 From dd59b8537f6cb53ab863fafad86a5828f1e889a2 Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Mon, 12 Jan 2009 15:17:20 -0700 Subject: dmaengine: fix dependency chaining In dmaengine we track the dependencies between the descriptors using the 'next' pointers of the structure. These pointers are set to NULL as soon as the corresponding descriptor has been submitted to the channel (in dma_run_dependencies()). But, the first 'next' in chain is still remaining set, regardless the fact, that tx->next has been already submitted. This may lead to multiple submissions of the same descriptor. This patch fixes this. Actually, some previous implementation of the xxx_run_dependencies() function already had this fix in place. The fdb..0eaf3 commit, beside the correct things, broke this. Cc: Signed-off-by: Yuri Tikhonov Signed-off-by: Dan Williams diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 403dbe7..6df144a 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -961,6 +961,8 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx) if (!dep) return; + /* we'll submit tx->next now, so clear the link */ + tx->next = NULL; chan = dep->chan; /* keep submitting up until a channel switch is detected -- cgit v0.10.2 From 6527de6d6d25ebfae7c7572cb7a4ed768e2e20a5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 12 Jan 2009 15:18:34 -0700 Subject: fsldma: use a valid 'device' for dma_pool_create The dmaengine sysfs implementation was fixed to support proper lifetime rules which means that the current: new_fsl_chan->dev = &new_fsl_chan->common.dev->device; ...retrieves a NULL pointer because new_fsl_chan->common.dev has not been allocated at this point. So, set new_fsl_chan->dev to a valid device. Cc: Li Yang Cc: Zhang Wei Reported-by: Ira Snyder Tested-by: Ira Snyder Signed-off-by: Dan Williams diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ca70a21..748e140 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -822,7 +822,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, */ WARN_ON(fdev->feature != new_fsl_chan->feature); - new_fsl_chan->dev = &new_fsl_chan->common.dev->device; + new_fsl_chan->dev = fdev->dev; new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); -- cgit v0.10.2 From 4a922a969cb0190ce4580d4b064e2ac35f3ac9bf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 Jan 2009 16:11:00 +0100 Subject: x86, cpufreq: remove leftover copymask_copy() Impact: fix potential boot crash on MAXSMP Remove code left over by: 50c668d: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read That cmd.cpumask is not allocated anymore. No impact on default !MAXSMP kernels. Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 6f11e02..8f3c95c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -235,8 +235,6 @@ static u32 get_cur_val(const struct cpumask *mask) return 0; } - cpumask_copy(cmd.mask, mask); - drv_read(&cmd); dprintk("get_cur_val = %u\n", cmd.val); -- cgit v0.10.2 From d86be86e9aab221089d72399072511f13fe2a771 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 13 Jan 2009 09:22:20 -0700 Subject: dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen Acked-by: Maciej Sosnowski Signed-off-by: Atsushi Nemoto Signed-off-by: Dan Williams diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 3603f1e..732fa1e 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -217,6 +217,10 @@ static int dmatest_func(void *data) chan = thread->chan; while (!kthread_should_stop()) { + struct dma_device *dev = chan->device; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_src, dma_dest; + total_tests++; len = dmatest_random() % test_buf_size + 1; @@ -226,10 +230,30 @@ static int dmatest_func(void *data) dmatest_init_srcbuf(thread->srcbuf, src_off, len); dmatest_init_dstbuf(thread->dstbuf, dst_off, len); - cookie = dma_async_memcpy_buf_to_buf(chan, - thread->dstbuf + dst_off, - thread->srcbuf + src_off, - len); + dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off, + len, DMA_TO_DEVICE); + /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */ + dma_dest = dma_map_single(dev->dev, thread->dstbuf, + test_buf_size, DMA_BIDIRECTIONAL); + + tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off, + dma_src, len, + DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP); + if (!tx) { + dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); + pr_warning("%s: #%u: prep error with src_off=0x%x " + "dst_off=0x%x len=0x%x\n", + thread_name, total_tests - 1, + src_off, dst_off, len); + msleep(100); + failed_tests++; + continue; + } + tx->callback = NULL; + cookie = tx->tx_submit(tx); + if (dma_submit_error(cookie)) { pr_warning("%s: #%u: submit error %d with src_off=0x%x " "dst_off=0x%x len=0x%x\n", @@ -253,6 +277,9 @@ static int dmatest_func(void *data) failed_tests++; continue; } + /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */ + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); error_count = 0; -- cgit v0.10.2 From c8399943bdb70fef78798b97f975506ecc99e039 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 12 Jan 2009 23:01:15 +0100 Subject: x86, generic: mark complex bitops.h inlines as __always_inline Impact: reduce kernel image size Hugh Dickins noticed that older gcc versions when the kernel is built for code size didn't inline some of the bitops. Mark all complex x86 bitops that have more than a single asm statement or two as always inline to avoid this problem. Probably should be done for other architectures too. Ingo then found a better fix that only requires a single line change, but it unfortunately only works on gcc 4.3. On older gccs the original patch still makes a ~0.3% defconfig difference with CONFIG_OPTIMIZE_INLINING=y. With gcc 4.1 and a defconfig like build: 6116998 1138540 883788 8139326 7c323e vmlinux-oi-with-patch 6137043 1138540 883788 8159371 7c808b vmlinux-optimize-inlining ~20k / 0.3% difference. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index e02a359..02b47a6 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -3,6 +3,9 @@ /* * Copyright 1992, Linus Torvalds. + * + * Note: inlines with more than a single statement should be marked + * __always_inline to avoid problems with older gcc's inlining heuristics. */ #ifndef _LINUX_BITOPS_H @@ -53,7 +56,8 @@ * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void set_bit(unsigned int nr, volatile unsigned long *addr) +static __always_inline void +set_bit(unsigned int nr, volatile unsigned long *addr) { if (IS_IMMEDIATE(nr)) { asm volatile(LOCK_PREFIX "orb %1,%0" @@ -90,7 +94,8 @@ static inline void __set_bit(int nr, volatile unsigned long *addr) * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ -static inline void clear_bit(int nr, volatile unsigned long *addr) +static __always_inline void +clear_bit(int nr, volatile unsigned long *addr) { if (IS_IMMEDIATE(nr)) { asm volatile(LOCK_PREFIX "andb %1,%0" @@ -204,7 +209,8 @@ static inline int test_and_set_bit(int nr, volatile unsigned long *addr) * * This is the same as test_and_set_bit on x86. */ -static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr) +static __always_inline int +test_and_set_bit_lock(int nr, volatile unsigned long *addr) { return test_and_set_bit(nr, addr); } @@ -300,7 +306,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return oldbit; } -static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr) +static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h index 9a3274a..937d7c4 100644 --- a/include/asm-generic/bitops/__ffs.h +++ b/include/asm-generic/bitops/__ffs.h @@ -9,7 +9,7 @@ * * Undefined if no bit exists, so code should check against 0 first. */ -static inline unsigned long __ffs(unsigned long word) +static __always_inline unsigned long __ffs(unsigned long word) { int num = 0; diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h index be24465..a60a7cc 100644 --- a/include/asm-generic/bitops/__fls.h +++ b/include/asm-generic/bitops/__fls.h @@ -9,7 +9,7 @@ * * Undefined if no set bit exists, so code should check against 0 first. */ -static inline unsigned long __fls(unsigned long word) +static __always_inline unsigned long __fls(unsigned long word) { int num = BITS_PER_LONG - 1; diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h index 850859b..0576d1f 100644 --- a/include/asm-generic/bitops/fls.h +++ b/include/asm-generic/bitops/fls.h @@ -9,7 +9,7 @@ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. */ -static inline int fls(int x) +static __always_inline int fls(int x) { int r = 32; diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h index 86d403f..b097cf8 100644 --- a/include/asm-generic/bitops/fls64.h +++ b/include/asm-generic/bitops/fls64.h @@ -15,7 +15,7 @@ * at position 64. */ #if BITS_PER_LONG == 32 -static inline int fls64(__u64 x) +static __always_inline int fls64(__u64 x) { __u32 h = x >> 32; if (h) @@ -23,7 +23,7 @@ static inline int fls64(__u64 x) return fls(x); } #elif BITS_PER_LONG == 64 -static inline int fls64(__u64 x) +static __always_inline int fls64(__u64 x) { if (x == 0) return 0; -- cgit v0.10.2 From e4fa4c97016037620f9dc8bafe03e1086b665b4c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Wed, 14 Jan 2009 14:58:15 +0800 Subject: rcu: add __cpuinit to rcu_init_percpu_data() Impact: reduce memory footprint add __cpuinit to rcu_init_percpu_data(), and this function's text will be discarded after boot when !CONFIG_HOTPLUG_CPU. Signed-off-by: Lai Jiangshan Signed-off-by: Ingo Molnar diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index 490934f..bd5a900 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -716,7 +716,7 @@ void rcu_check_callbacks(int cpu, int user) raise_rcu_softirq(); } -static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp, +static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp, struct rcu_data *rdp) { unsigned long flags; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index f2d8638..b2fd602 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1314,7 +1314,7 @@ int rcu_needs_cpu(int cpu) * access due to the fact that this CPU cannot possibly have any RCU * callbacks in flight yet. */ -static void +static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp) { unsigned long flags; -- cgit v0.10.2 From baf48f6577e581a9adb8fe849dc80e24b21d171d Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Mon, 12 Jan 2009 21:15:17 -0800 Subject: softlock: fix false panic which can occur if softlockup_thresh is reduced At run-time, if softlockup_thresh is changed to a much lower value, touch_timestamp is likely to be much older than the new softlock_thresh. This will cause a false softlockup to be detected. If softlockup_panic is enabled, the system will panic. The fix is to touch all watchdogs before changing softlockup_thresh. Signed-off-by: Mandeep Singh Baines Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 4cae9b8..54cbabf 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -293,6 +293,9 @@ extern void sched_show_task(struct task_struct *p); extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); extern void touch_all_softlockup_watchdogs(void); +extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; extern unsigned long sysctl_hung_task_check_count; extern unsigned long sysctl_hung_task_timeout_secs; diff --git a/kernel/softlockup.c b/kernel/softlockup.c index d9188c6..85d5a24 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -16,6 +16,7 @@ #include #include #include +#include #include @@ -88,6 +89,14 @@ void touch_all_softlockup_watchdogs(void) } EXPORT_SYMBOL(touch_all_softlockup_watchdogs); +int proc_dosoftlockup_thresh(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos) +{ + touch_all_softlockup_watchdogs(); + return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos); +} + /* * This callback runs from the timer interrupt, and checks * whether the watchdog thread has hung or not: diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 89d7443..596dc31 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -800,7 +800,7 @@ static struct ctl_table kern_table[] = { .data = &softlockup_thresh, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_dointvec_minmax, + .proc_handler = &proc_dosoftlockup_thresh, .strategy = &sysctl_intvec, .extra1 = &neg_one, .extra2 = &sixty, -- cgit v0.10.2 From 14819ea1e0bcbdc9b084cd60a6a24d5d786324ef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 14 Jan 2009 12:34:21 +0100 Subject: irq: export __set_irq_handler() and handle_level_irq() Impact: build fix ARM updates broke x86 allmodconfig builds: ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined! ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined! Signed-off-by: Ingo Molnar diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index f63c706..7de11bd 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -383,6 +383,7 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc) out_unlock: spin_unlock(&desc->lock); } +EXPORT_SYMBOL_GPL(handle_level_irq); /** * handle_fasteoi_irq - irq handler for transparent controllers @@ -593,6 +594,7 @@ __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, } spin_unlock_irqrestore(&desc->lock, flags); } +EXPORT_SYMBOL_GPL(__set_irq_handler); void set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, -- cgit v0.10.2 From 5cca0cf15a94417f49625ce52e23589eed0a1675 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 9 Jan 2009 14:35:20 -0800 Subject: x86, pat: fix reserve_memtype() for legacy 1MB range Thierry Vignaud reported: > http://bugzilla.kernel.org/show_bug.cgi?id=12372 > > On P4 with an SiS motherboard (video card is a SiS 651) > X server fails to start with error: > xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument) Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time. Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed) Reported-and-tested-by: Thierry Vignaud Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 85cbd3c..070ee4a 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -333,11 +333,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, req_type & _PAGE_CACHE_MASK); } - is_range_ram = pagerange_is_ram(start, end); - if (is_range_ram == 1) - return reserve_ram_pages_type(start, end, req_type, new_type); - else if (is_range_ram < 0) - return -EINVAL; + /* + * For legacy reasons, some parts of the physical address range in the + * legacy 1MB region is treated as non-RAM (even when listed as RAM in + * the e820 tables). So we will track the memory attributes of this + * legacy 1MB region using the linear memtype_list always. + */ + if (end >= ISA_END_ADDRESS) { + is_range_ram = pagerange_is_ram(start, end); + if (is_range_ram == 1) + return reserve_ram_pages_type(start, end, req_type, + new_type); + else if (is_range_ram < 0) + return -EINVAL; + } new = kmalloc(sizeof(struct memtype), GFP_KERNEL); if (!new) @@ -437,11 +446,19 @@ int free_memtype(u64 start, u64 end) if (is_ISA_range(start, end - 1)) return 0; - is_range_ram = pagerange_is_ram(start, end); - if (is_range_ram == 1) - return free_ram_pages_type(start, end); - else if (is_range_ram < 0) - return -EINVAL; + /* + * For legacy reasons, some parts of the physical address range in the + * legacy 1MB region is treated as non-RAM (even when listed as RAM in + * the e820 tables). So we will track the memory attributes of this + * legacy 1MB region using the linear memtype_list always. + */ + if (end >= ISA_END_ADDRESS) { + is_range_ram = pagerange_is_ram(start, end); + if (is_range_ram == 1) + return free_ram_pages_type(start, end); + else if (is_range_ram < 0) + return -EINVAL; + } spin_lock(&memtype_lock); list_for_each_entry(entry, &memtype_list, nd) { -- cgit v0.10.2 From 2ea038917bbdd51a7ae4a898c6a04641324dd033 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 14 Jan 2009 21:38:20 +0100 Subject: Revert "kbuild: strip generated symbols from *.ko" This reverts commit ad7a953c522ceb496611d127e51e278bfe0ff483. And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL") 9bb482476c6c9d1ae033306440c51ceac93ea80c These stripping patches has caused a set of issues: 1) People have reported compatibility issues with binutils due to lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2 Reported by: Wenji 2) ccache and distcc no longer works as expeced Reported by: Ted, Roland, + others 3) The installed modules increased a lot in size Reported by: Ted, Davej + others Reported-by: Wenji Huang Reported-by: "Theodore Ts'o" Reported-by: Dave Jones Reported-by: Roland McGrath Signed-off-by: Sam Ravnborg diff --git a/Makefile b/Makefile index c06e250..c2c4bbe 100644 --- a/Makefile +++ b/Makefile @@ -606,25 +606,20 @@ export INSTALL_PATH ?= /boot MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) export MODLIB -strip-symbols := $(srctree)/scripts/strip-symbols \ - $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols) - # -# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while -# they get installed. If INSTALL_MOD_STRIP is '1', then the default -# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will -# be used as the option(s) to the objcopy command. +# INSTALL_MOD_STRIP, if defined, will cause modules to be +# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +# the default option --strip-debug will be used. Otherwise, +# INSTALL_MOD_STRIP will used as the options to the strip command. + ifdef INSTALL_MOD_STRIP ifeq ($(INSTALL_MOD_STRIP),1) -mod_strip_cmd = $(OBJCOPY) --strip-debug -ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED)) -mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols)) -endif +mod_strip_cmd = $(STRIP) --strip-debug else -mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP) +mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) endif # INSTALL_MOD_STRIP=1 else -mod_strip_cmd = false +mod_strip_cmd = true endif # INSTALL_MOD_STRIP export mod_strip_cmd @@ -754,7 +749,6 @@ last_kallsyms := 2 endif kallsyms.o := .tmp_kallsyms$(last_kallsyms).o -kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h) define verify_kallsyms $(Q)$(if $($(quiet)cmd_sysmap), \ @@ -779,41 +773,24 @@ endef # Generate .S file with all kernel symbols quiet_cmd_kallsyms = KSYM $@ - cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \ - | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@ - -quiet_cmd_kstrip = STRIP $@ - cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@ + cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ + $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ -$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute -$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE +.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE $(call if_changed_dep,as_o_S) -ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y) -strip-ext := .stripped -endif - -.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h) +.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) $(call cmd,kallsyms) -# make -jN seems to have problems with intermediate files, see bug #3330. -.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped) -.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h) - $(call cmd,kstrip) - -ifneq ($(CONFIG_DEBUG_INFO),y) -.tmp_vmlinux%: LDFLAGS_vmlinux += -S -endif # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version -.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE - $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__)) +.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE + $(call if_changed_rule,ksym_ld) -.tmp_vmlinux0$(strip-ext): - $(Q)echo "placeholder" >$@ +.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE + $(call if_changed,vmlinux__) -.tmp_vmlinux1: .tmp_kallsyms0.o -.tmp_vmlinux2: .tmp_kallsyms1.o -.tmp_vmlinux3: .tmp_kallsyms2.o +.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE + $(call if_changed,vmlinux__) # Needs to visit scripts/ before $(KALLSYMS) can be used. $(KALLSYMS): scripts ; diff --git a/arch/x86/scripts/strip-symbols b/arch/x86/scripts/strip-symbols deleted file mode 100644 index a2f1ccb..0000000 --- a/arch/x86/scripts/strip-symbols +++ /dev/null @@ -1 +0,0 @@ -__cpu_vendor_dev_X86_VENDOR_* diff --git a/init/Kconfig b/init/Kconfig index a724a14..0e99247 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -626,13 +626,6 @@ config KALLSYMS_ALL Say N. -config KALLSYMS_STRIP_GENERATED - bool "Strip machine generated symbols from kallsyms" - depends on KALLSYMS_ALL - default y - help - Say N if you want kallsyms to retain even machine generated symbols. - config KALLSYMS_EXTRA_PASS bool "Do an extra kallsyms pass" depends on KALLSYMS diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index e694afa..7b8b0f2 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -30,19 +30,20 @@ #define all_var 0 #endif -extern const unsigned long kallsyms_addresses[]; -extern const u8 kallsyms_names[]; +/* These will be re-linked against their real values during the second link stage */ +extern const unsigned long kallsyms_addresses[] __attribute__((weak)); +extern const u8 kallsyms_names[] __attribute__((weak)); /* tell the compiler that the count isn't in the small data section if the arch * has one (eg: FRV) */ extern const unsigned long kallsyms_num_syms - __attribute__((__section__(".rodata"))); +__attribute__((weak, section(".rodata"))); -extern const u8 kallsyms_token_table[]; -extern const u16 kallsyms_token_index[]; +extern const u8 kallsyms_token_table[] __attribute__((weak)); +extern const u16 kallsyms_token_index[] __attribute__((weak)); -extern const unsigned long kallsyms_markers[]; +extern const unsigned long kallsyms_markers[] __attribute__((weak)); static inline int is_kernel_inittext(unsigned long addr) { @@ -167,6 +168,9 @@ static unsigned long get_symbol_pos(unsigned long addr, unsigned long symbol_start = 0, symbol_end = 0; unsigned long i, low, high, mid; + /* This kernel should never had been booted. */ + BUG_ON(!kallsyms_addresses); + /* do a binary search on the sorted kallsyms_addresses array */ low = 0; high = kallsyms_num_syms; diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 5d90030..c7de8b3 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -151,16 +151,16 @@ cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< $(obj)/%.i: $(src)/%.c FORCE $(call if_changed_dep,cc_i_c) -cmd_genksyms = \ +cmd_gensymtypes = \ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ - $(GENKSYMS) -T $@ -A -a $(ARCH) \ + $(GENKSYMS) -T $@ -a $(ARCH) \ $(if $(KBUILD_PRESERVE),-p) \ $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null))) quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = \ set -e; \ - $(call cmd_genksyms, true) >/dev/null; \ + $(call cmd_gensymtypes, true) >/dev/null; \ test -s $@ || rm -f $@ $(obj)/%.symtypes : $(src)/%.c FORCE @@ -177,38 +177,28 @@ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< else # When module versioning is enabled the following steps are executed: -# o compile a .tmp_.s from .c -# o if .tmp_.s doesn't contain a __ksymtab version, i.e. does -# not export symbols, we just assemble .tmp_.s to .o and +# o compile a .tmp_.o from .c +# o if .tmp_.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, we just rename .tmp_.o to .o and # are done. # o otherwise, we calculate symbol versions using the good old # genksyms on the preprocessed source and postprocess them in a way -# that they are usable as assembly source -# o assemble .o from .tmp_.s forcing inclusion of directives -# defining the actual values of __crc_*, followed by objcopy-ing them -# to force these symbols to be local to permit stripping them later. -s_file = $(@D)/.tmp_$(@F:.o=.s) -v_file = $(@D)/.tmp_$(@F:.o=.v) -tmp_o_file = $(@D)/.tmp_$(@F) -no_g_c_flags = $(filter-out -g%,$(c_flags)) - -cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $< +# that they are usable as a linker script +# o generate .o from .tmp_.o using the linker to +# replace the unresolved symbols __crc_exported_symbol with +# the actual value of the checksum generated by genksyms +cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< cmd_modversions = \ - if grep -q __ksymtab $(s_file); then \ - if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \ - && $(CC) $(no_g_c_flags) -c -Wa,$(v_file) \ - -o $(tmp_o_file) $(s_file) \ - && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w \ - $(tmp_o_file) $@; \ - then \ - : ; \ - else \ - rm -f $@; exit 1; \ - fi; \ + if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + $(call cmd_gensymtypes, $(KBUILD_SYMTYPES)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ else \ - rm -f $(v_file); \ - $(CC) $(no_g_c_flags) -c -o $@ $(s_file); \ + mv -f $(@D)/.tmp_$(@F) $@; \ fi; endif @@ -225,12 +215,7 @@ define rule_cc_o_c $(cmd_record_mcount) \ scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ $(dot-target).tmp; \ - if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then \ - echo >> $(dot-target).tmp; \ - echo '$@: $(GENKSYMS)' >> $(dot-target).tmp; \ - echo '$(GENKSYMS):: ;' >> $(dot-target).tmp; \ - fi; \ - rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?); \ + rm -f $(depfile); \ mv -f $(dot-target).tmp $(dot-target).cmd endef diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index a5122dc..efa5d94 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -17,8 +17,7 @@ __modinst: $(modules) @: quiet_cmd_modules_install = INSTALL $@ - cmd_modules_install = mkdir -p $(2); \ - $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2) + cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) # Modules built outside the kernel source tree go into extra by default INSTALL_MOD_DIR ?= extra diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c index f8bb4ca..3a8297b 100644 --- a/scripts/genksyms/genksyms.c +++ b/scripts/genksyms/genksyms.c @@ -43,7 +43,7 @@ int cur_line = 1; char *cur_filename; static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types, - flag_preserve, flag_warnings, flag_asm; + flag_preserve, flag_warnings; static const char *arch = ""; static const char *mod_prefix = ""; @@ -610,11 +610,8 @@ void export_symbol(const char *name) if (flag_dump_defs) fputs(">\n", debugfile); - /* Used as assembly source or a linker script. */ - printf(flag_asm - ? ".equiv %s__crc_%s, %#08lx\n" - : "%s__crc_%s = %#08lx ;\n", - mod_prefix, name, crc); + /* Used as a linker script. */ + printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc); } } @@ -651,10 +648,9 @@ void error_with_pos(const char *fmt, ...) static void genksyms_usage(void) { - fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n" + fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n" #ifdef __GNU_LIBRARY__ " -a, --arch Select architecture\n" - " -A, --asm Generate assembly rather than linker script\n" " -d, --debug Increment the debug level (repeatable)\n" " -D, --dump Dump expanded symbol defs (for debugging only)\n" " -r, --reference file Read reference symbols from a file\n" @@ -666,7 +662,6 @@ static void genksyms_usage(void) " -V, --version Print the release version\n" #else /* __GNU_LIBRARY__ */ " -a Select architecture\n" - " -A Generate assembly rather than linker script\n" " -d Increment the debug level (repeatable)\n" " -D Dump expanded symbol defs (for debugging only)\n" " -r file Read reference symbols from a file\n" @@ -688,7 +683,6 @@ int main(int argc, char **argv) #ifdef __GNU_LIBRARY__ struct option long_opts[] = { {"arch", 1, 0, 'a'}, - {"asm", 0, 0, 'A'}, {"debug", 0, 0, 'd'}, {"warnings", 0, 0, 'w'}, {"quiet", 0, 0, 'q'}, @@ -701,10 +695,10 @@ int main(int argc, char **argv) {0, 0, 0, 0} }; - while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph", + while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph", &long_opts[0], NULL)) != EOF) #else /* __GNU_LIBRARY__ */ - while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF) + while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF) #endif /* __GNU_LIBRARY__ */ switch (o) { case 'a': @@ -722,9 +716,6 @@ int main(int argc, char **argv) case 'V': fputs("genksyms version 2.5.60\n", stderr); break; - case 'A': - flag_asm = 1; - break; case 'D': flag_dump_defs = 1; break; diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 83484fe..971e011 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.1 */ +/* ANSI-C code produced by gperf version 3.0.2 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -32,7 +32,7 @@ #line 3 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; -/* maximum key range = 64, duplicates = 0 */ +/* maximum key range = 62, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -46,32 +46,32 @@ is_reserved_hash (register const char *str, register unsigned int len) { static const unsigned char asso_values[] = { - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 0, - 67, 67, 67, 67, 67, 67, 15, 67, 67, 67, - 0, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 0, 67, 0, 67, 5, - 25, 20, 15, 30, 67, 15, 67, 67, 10, 0, - 10, 40, 20, 67, 10, 5, 0, 10, 15, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67 + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 5, + 65, 65, 65, 65, 65, 65, 35, 65, 65, 65, + 0, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 0, 65, 0, 65, 5, + 20, 15, 10, 30, 65, 15, 65, 65, 20, 0, + 10, 35, 20, 65, 10, 5, 0, 10, 5, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65 }; return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]]; } @@ -84,119 +84,116 @@ is_reserved_word (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 45, + TOTAL_KEYWORDS = 43, MIN_WORD_LENGTH = 3, MAX_WORD_LENGTH = 24, MIN_HASH_VALUE = 3, - MAX_HASH_VALUE = 66 + MAX_HASH_VALUE = 64 }; static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 28 "scripts/genksyms/keywords.gperf" +#line 26 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 8 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 11 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 54 "scripts/genksyms/keywords.gperf" +#line 52 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 13 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" {"__attribute__", ATTRIBUTE_KEYW}, -#line 15 "scripts/genksyms/keywords.gperf" +#line 13 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 20 "scripts/genksyms/keywords.gperf" +#line 18 "scripts/genksyms/keywords.gperf" {"__signed__", SIGNED_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 44 "scripts/genksyms/keywords.gperf" {"static", STATIC_KEYW}, - {""}, -#line 41 "scripts/genksyms/keywords.gperf" +#line 20 "scripts/genksyms/keywords.gperf" + {"__volatile__", VOLATILE_KEYW}, +#line 39 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 32 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 33 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 45 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 27 "scripts/genksyms/keywords.gperf" - {"restrict", RESTRICT_KEYW}, -#line 7 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" - {"__inline__", INLINE_KEYW}, - {""}, -#line 22 "scripts/genksyms/keywords.gperf" - {"__volatile__", VOLATILE_KEYW}, -#line 5 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, #line 25 "scripts/genksyms/keywords.gperf" + {"restrict", RESTRICT_KEYW}, +#line 23 "scripts/genksyms/keywords.gperf" {"_restrict", RESTRICT_KEYW}, - {""}, -#line 12 "scripts/genksyms/keywords.gperf" - {"__attribute", ATTRIBUTE_KEYW}, -#line 6 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, #line 16 "scripts/genksyms/keywords.gperf" + {"__inline__", INLINE_KEYW}, +#line 10 "scripts/genksyms/keywords.gperf" + {"__attribute", ATTRIBUTE_KEYW}, + {""}, +#line 14 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 8 "scripts/genksyms/keywords.gperf" - {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" + {"__volatile", VOLATILE_KEYW}, +#line 36 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 17 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 9 "scripts/genksyms/keywords.gperf" - {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" - {"union", UNION_KEYW}, -#line 53 "scripts/genksyms/keywords.gperf" +#line 7 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, + {""}, +#line 51 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 46 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 15 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 31 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 21 "scripts/genksyms/keywords.gperf" - {"__volatile", VOLATILE_KEYW}, +#line 47 "scripts/genksyms/keywords.gperf" + {"union", UNION_KEYW}, {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"unsigned", UNSIGNED_KEYW}, - {""}, -#line 44 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" + {"void", VOID_KEYW}, +#line 42 "scripts/genksyms/keywords.gperf" {"short", SHORT_KEYW}, -#line 40 "scripts/genksyms/keywords.gperf" + {""}, {""}, +#line 50 "scripts/genksyms/keywords.gperf" + {"volatile", VOLATILE_KEYW}, + {""}, +#line 37 "scripts/genksyms/keywords.gperf" + {"float", FLOAT_KEYW}, +#line 34 "scripts/genksyms/keywords.gperf" + {"double", DOUBLE_KEYW}, + {""}, +#line 5 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, + {""}, {""}, +#line 38 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, +#line 6 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 41 "scripts/genksyms/keywords.gperf" + {"register", REGISTER_KEYW}, {""}, -#line 52 "scripts/genksyms/keywords.gperf" - {"volatile", VOLATILE_KEYW}, -#line 42 "scripts/genksyms/keywords.gperf" - {"long", LONG_KEYW}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 22 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, - {""}, {""}, #line 43 "scripts/genksyms/keywords.gperf" - {"register", REGISTER_KEYW}, -#line 51 "scripts/genksyms/keywords.gperf" - {"void", VOID_KEYW}, -#line 39 "scripts/genksyms/keywords.gperf" - {"float", FLOAT_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" - {"double", DOUBLE_KEYW}, - {""}, {""}, {""}, {""}, -#line 45 "scripts/genksyms/keywords.gperf" - {"signed", SIGNED_KEYW} + {"signed", SIGNED_KEYW}, + {""}, {""}, +#line 40 "scripts/genksyms/keywords.gperf" + {"long", LONG_KEYW} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 8abe7ab..5ef3733 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -5,8 +5,6 @@ struct resword { const char *name; int token; } EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW -EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW -EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW __asm, ASM_KEYW __asm__, ASM_KEYW __attribute, ATTRIBUTE_KEYW diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c index 9275812..ad2434b 100644 --- a/scripts/kallsyms.c +++ b/scripts/kallsyms.c @@ -130,9 +130,18 @@ static int read_symbol(FILE *in, struct sym_entry *s) static int symbol_valid(struct sym_entry *s) { /* Symbols which vary between passes. Passes 1 and 2 must have - * identical symbol lists. + * identical symbol lists. The kallsyms_* symbols below are only added + * after pass 1, they would be included in pass 2 when --all-symbols is + * specified so exclude them to get a stable symbol list. */ static char *special_symbols[] = { + "kallsyms_addresses", + "kallsyms_num_syms", + "kallsyms_names", + "kallsyms_markers", + "kallsyms_token_table", + "kallsyms_token_index", + /* Exclude linker generated symbols which vary between passes */ "_SDA_BASE_", /* ppc */ "_SDA2_BASE_", /* ppc */ @@ -164,9 +173,7 @@ static int symbol_valid(struct sym_entry *s) } /* Exclude symbols which vary between passes. */ - if (strstr((char *)s->sym + offset, "_compiled.") || - strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 || - strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0) + if (strstr((char *)s->sym + offset, "_compiled.")) return 0; for (i = 0; special_symbols[i]; i++) @@ -543,10 +550,8 @@ int main(int argc, char **argv) usage(); read_map(stdin); - if (table_cnt) { - sort_symbols(); - optimize_token_table(); - } + sort_symbols(); + optimize_token_table(); write_src(); return 0; diff --git a/scripts/mksysmap b/scripts/mksysmap index 1db316a..6e133a0 100644 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -37,6 +37,9 @@ # readprofile starts reading symbols when _stext is found, and # continue until it finds a symbol which is not either of 'T', 't', -# 'W' or 'w'. +# 'W' or 'w'. __crc_ are 'A' and placed in the middle +# so we just ignore them to let readprofile continue to work. +# (At least sparc64 has __crc_ in the middle). + +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2 -$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2 diff --git a/scripts/strip-symbols b/scripts/strip-symbols deleted file mode 100644 index 29ee8c1..0000000 --- a/scripts/strip-symbols +++ /dev/null @@ -1,22 +0,0 @@ -<*> -*.h -__compound_literal[$.][0-9]* -__crc_[a-zA-Z_]* -__exitcall_[a-zA-Z_]* -__func__[$.][0-9]* -__FUNCTION__[$.][0-9]* -gcc[0-9]_compiled[$.] -__initcall_[a-zA-Z_]* -__kcrctab_[a-zA-Z_]* -__kstrtab_[a-zA-Z_]* -__ksymtab_[a-zA-Z_]* -__mod_[a-zA-Z_]*[0-9] -__module_depends -__param_[a-zA-Z_]* -__pci_fixup_*PCI_ANY_IDPCI_ANY_ID* -__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_* -__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID* -__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_* -__PRETTY_FUNCTION__[$.][0-9]* -__setup_[a-zA-Z_]* -____versions -- cgit v0.10.2 From 2302e8730e5caa774e7c6702fc878404d71f13f9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 7 Jan 2009 22:33:15 +0100 Subject: kbuild: print usage with no arguments in scripts/config Requested by Sam. Signed-off-by: Andi Kleen Signed-off-by: Sam Ravnborg diff --git a/scripts/config b/scripts/config index 68b9761..db6084b 100755 --- a/scripts/config +++ b/scripts/config @@ -60,6 +60,10 @@ else FN=.config fi +if [ "$1" = "" ] ; then + usage +fi + while [ "$1" != "" ] ; do CMD="$1" shift -- cgit v0.10.2 From df291fa993c506da89a89264ff8166bccd172a14 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Jan 2009 10:59:34 -0800 Subject: kbuild: fix kbuild.txt typos Fix typos in the new kbuild.txt file. Signed-off-by: Randy Dunlap Signed-off-by: Sam Ravnborg diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 923f9dd..f3355b6 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -3,7 +3,7 @@ Environment variables KCPPFLAGS -------------------------------------------------- Additional options to pass when preprocessing. The preprocessing options -will be used in all cases where kbuild do preprocessing including +will be used in all cases where kbuild does preprocessing including building C files and assembler files. KAFLAGS @@ -16,7 +16,7 @@ Additional options to the C compiler. KBUILD_VERBOSE -------------------------------------------------- -Set the kbuild verbosity. Can be assinged same values as "V=...". +Set the kbuild verbosity. Can be assigned same values as "V=...". See make help for the full list. Setting "V=..." takes precedence over KBUILD_VERBOSE. @@ -35,14 +35,14 @@ KBUILD_OUTPUT -------------------------------------------------- Specify the output directory when building the kernel. The output directory can also be specificed using "O=...". -Setting "O=..." takes precedence over KBUILD_OUTPUT +Setting "O=..." takes precedence over KBUILD_OUTPUT. ARCH -------------------------------------------------- Set ARCH to the architecture to be built. In most cases the name of the architecture is the same as the directory name found in the arch/ directory. -But some architectures suach as x86 and sparc has aliases. +But some architectures such as x86 and sparc have aliases. x86: i386 for 32 bit, x86_64 for 64 bit sparc: sparc for 32 bit, sparc64 for 64 bit @@ -63,7 +63,7 @@ CF is often used on the command-line like this: INSTALL_PATH -------------------------------------------------- INSTALL_PATH specifies where to place the updated kernel and system map -images. Default is /boot, but you can set it to other values +images. Default is /boot, but you can set it to other values. MODLIB @@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command. INSTALL_FW_PATH -------------------------------------------------- -INSTALL_FW_PATH specify where to install the firmware blobs. +INSTALL_FW_PATH specifies where to install the firmware blobs. The default value is: $(INSTALL_MOD_PATH)/lib/firmware @@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored. INSTALL_HDR_PATH -------------------------------------------------- -INSTALL_HDR_PATH specify where to install user space headers when +INSTALL_HDR_PATH specifies where to install user space headers when executing "make headers_*". The default value is: @@ -112,22 +112,23 @@ The value can be overridden in which case the default value is ignored. KBUILD_MODPOST_WARN -------------------------------------------------- -KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined -symbols in the final module linking stage. +KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined +symbols in the final module linking stage. It changes such errors +into warnings. -KBUILD_MODPOST_FINAL +KBUILD_MODPOST_NOFINAL -------------------------------------------------- KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. -This is solely usefull to speed up test compiles. +This is solely useful to speed up test compiles. KBUILD_EXTRA_SYMBOLS -------------------------------------------------- -For modules use symbols from another modules. +For modules that use symbols from other modules. See more details in modules.txt. ALLSOURCE_ARCHS -------------------------------------------------- -For tags/TAGS/cscope targets, you can specify more than one archs -to be included in the databases, separated by blankspace. e.g. +For tags/TAGS/cscope targets, you can specify more than one arch +to be included in the databases, separated by blank space. E.g.: $ make ALLSOURCE_ARCHS="x86 mips arm" tags -- cgit v0.10.2 From b8a1b1ce14252b59b2d5c89de25b54f9bfd4cc5e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 14 Jan 2009 14:55:41 -0800 Subject: IPoIB: Fix hang in napi_disable() if P_Key is never found After commit fe25c561 ("IPoIB: Don't enable NAPI when it's already enabled"), if an interface is brought up but the corresponding P_Key never appears, then ipoib_stop() will hang in napi_disable(), because ipoib_open() returns before it does napi_enable(). Fix this by changing ipoib_open() to call napi_enable() even if the P_Key isn't present. Reported-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index dce0443..0bd2a4f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,23 +106,17 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); + if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) + napi_enable(&priv->napi); if (ipoib_pkey_dev_delay_open(dev)) return 0; - napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) + goto err_disable; - if (ipoib_ib_dev_open(dev)) { - napi_disable(&priv->napi); - return -EINVAL; - } - - if (ipoib_ib_dev_up(dev)) { - ipoib_ib_dev_stop(dev, 1); - napi_disable(&priv->napi); - return -EINVAL; - } + if (ipoib_ib_dev_up(dev)) + goto err_stop; if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) { struct ipoib_dev_priv *cpriv; @@ -144,6 +138,15 @@ int ipoib_open(struct net_device *dev) netif_start_queue(dev); return 0; + +err_stop: + ipoib_ib_dev_stop(dev, 1); + +err_disable: + napi_disable(&priv->napi); + clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); + + return -EINVAL; } static int ipoib_stop(struct net_device *dev) -- cgit v0.10.2 From 29b37f42127f7da511560a40ea74f5047da40c13 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 13 Jan 2009 11:26:18 +1100 Subject: crypto: authenc - Fix zero-length IV crash As it is if an algorithm with a zero-length IV is used (e.g., NULL encryption) with authenc, authenc may generate an SG entry of length zero, which will trigger a BUG check in the hash layer. This patch fixes it by skipping the IV SG generation if the IV size is zero. Signed-off-by: Herbert Xu diff --git a/crypto/authenc.c b/crypto/authenc.c index 40b6e9e..5793b64 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -158,16 +158,19 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv, dstp = sg_page(dst); vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset; - sg_init_table(cipher, 2); - sg_set_buf(cipher, iv, ivsize); - authenc_chain(cipher, dst, vdst == iv + ivsize); + if (ivsize) { + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, dst, vdst == iv + ivsize); + dst = cipher; + } cryptlen = req->cryptlen + ivsize; - hash = crypto_authenc_hash(req, flags, cipher, cryptlen); + hash = crypto_authenc_hash(req, flags, dst, cryptlen); if (IS_ERR(hash)) return PTR_ERR(hash); - scatterwalk_map_and_copy(hash, cipher, cryptlen, + scatterwalk_map_and_copy(hash, dst, cryptlen, crypto_aead_authsize(authenc), 1); return 0; } @@ -285,11 +288,14 @@ static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, srcp = sg_page(src); vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset; - sg_init_table(cipher, 2); - sg_set_buf(cipher, iv, ivsize); - authenc_chain(cipher, src, vsrc == iv + ivsize); + if (ivsize) { + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, src, vsrc == iv + ivsize); + src = cipher; + } - return crypto_authenc_verify(req, cipher, cryptlen + ivsize); + return crypto_authenc_verify(req, src, cryptlen + ivsize); } static int crypto_authenc_decrypt(struct aead_request *req) -- cgit v0.10.2 From 6782dfe44acedf1e583d84e9e0d4f966d8e9befa Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 14 Jan 2009 22:32:58 -0700 Subject: fsldma: check for NO_IRQ in fsl_dma_chan_remove() There's no per-channel IRQ on mpc83xx, so only call free_irq if we have one. Acked-by: Timur Tabi Acked-by: Li Yang Signed-off-by: Peter Korsgaard Signed-off-by: Dan Williams diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 748e140..b1b45eb 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -890,7 +890,8 @@ err_no_reg: static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan) { - free_irq(fchan->irq, fchan); + if (fchan->irq != NO_IRQ) + free_irq(fchan->irq, fchan); list_del(&fchan->common.device_node); iounmap(fchan->reg_base); kfree(fchan); -- cgit v0.10.2 From cbbe1efa4972350286b52cb48aefaa11e198c0fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 14 Jan 2009 21:44:39 -0800 Subject: IPoIB: Fix deadlock between ipoib_open() and child interface create Fix a deadlock between child interface creation/deletion and ipoib start/stop. The former takes vlan_mutex, and then might take RTNL via register_netdev()/unregister_netdev(). The latter is executed with RTNL held, and tries to take vlan_mutex, which can lead to an AB-BA deadlock. Fix this by having the child interface creation/deletion code take the RTNL first so vlan_mutex always nests inside RTNL. We can use register_netdevice() for child interfaces because we form the interface name from the parent interface and hence don't need the '%' expansion of register_netdev(). Reported-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 2cf1a40..5a76a55 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -61,6 +61,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + rtnl_lock(); mutex_lock(&ppriv->vlan_mutex); /* @@ -111,7 +112,7 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) goto device_init_failed; } - result = register_netdev(priv->dev); + result = register_netdevice(priv->dev); if (result) { ipoib_warn(priv, "failed to initialize; error %i", result); goto register_failed; @@ -134,12 +135,13 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) list_add_tail(&priv->list, &ppriv->child_intfs); mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return 0; sysfs_failed: ipoib_delete_debug_files(priv->dev); - unregister_netdev(priv->dev); + unregister_netdevice(priv->dev); register_failed: ipoib_dev_cleanup(priv->dev); @@ -149,6 +151,7 @@ device_init_failed: err: mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return result; } @@ -162,10 +165,11 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) ppriv = netdev_priv(pdev); + rtnl_lock(); mutex_lock(&ppriv->vlan_mutex); list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) { if (priv->pkey == pkey) { - unregister_netdev(priv->dev); + unregister_netdevice(priv->dev); ipoib_dev_cleanup(priv->dev); list_del(&priv->list); free_netdev(priv->dev); @@ -175,6 +179,7 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey) } } mutex_unlock(&ppriv->vlan_mutex); + rtnl_unlock(); return ret; } -- cgit v0.10.2 From 9e6f8ed7c3a303d37eb119847dd3029701e37e28 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Wed, 14 Jan 2009 13:02:00 +0100 Subject: mfd: Remove non exported references from pcf50633 Remove references to set_irq_type and handle_level_irq which are not exported to modules Signed-off-by: Balaji Rao Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 24508e2..ea9488e 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -626,7 +626,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client, } if (client->irq) { - set_irq_handler(client->irq, handle_level_irq); ret = request_irq(client->irq, pcf50633_irq, IRQF_TRIGGER_LOW, "pcf50633", pcf); -- cgit v0.10.2 From 934d96eafadcf3eb3ccd094af9919f020907fc41 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 14 Jan 2009 20:38:17 +0530 Subject: time-sched.c: tick_nohz_update_jiffies should be static Impact: cleanup, reduce kernel size a bit, avoid sparse warning Fixes sparse warning: kernel/time/tick-sched.c:137:6: warning: symbol 'tick_nohz_update_jiffies' was not declared. Should it be static? Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 1b6c05b..d3f1ef4 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -134,7 +134,7 @@ __setup("nohz=", setup_tick_nohz); * value. We do this unconditionally on any cpu, as we don't know whether the * cpu, which has the update task assigned is in a long sleep. */ -void tick_nohz_update_jiffies(void) +static void tick_nohz_update_jiffies(void) { int cpu = smp_processor_id(); struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); -- cgit v0.10.2 From dd7667aa700a45ffb3efac64f6df0867d5837f5b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:09:51 +0200 Subject: ARM: OMAP: Fix compile for various McBSP Include irqs.h or cpu.h directly as needed to fix omap builds. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 4474da7..ca7a0cc 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index acdc709..e20023c 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From dc0e88c7e15acbe3d7e8682312f709938f0dcf01 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:09:52 +0200 Subject: ARM: OMAP: Fix compile for palmte Remove old MMC platform init code accidentally left behind. Patches are welcome to the new style MMC init code. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 75e32d3..00322f4 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -195,15 +195,6 @@ static struct omap_usb_config palmte_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_mmc_config palmte_mmc_config __initdata = { - .mmc[0] = { - .enabled = 1, - .wp_pin = PALMTE_MMC_WP_GPIO, - .power_pin = PALMTE_MMC_POWER_GPIO, - .switch_pin = PALMTE_MMC_SWITCH_GPIO, - }, -}; - static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -- cgit v0.10.2 From 73069e388d0f2509e45e1a58b0facca99ef2446e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 15 Jan 2009 13:09:52 +0200 Subject: ARM: OMAP: Fix gpio by switching to generic gpio calls, v2 Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8171fe0..09a2422 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -423,9 +423,9 @@ static void __init omap_sx1_init(void) /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ - omap_request_gpio(1); /* A_IRDA_OFF */ - omap_request_gpio(11); /* A_SWITCH */ - omap_request_gpio(15); /* A_USB_ON */ + gpio_request(1, "A_IRDA_OFF"); + gpio_request(11, "A_SWITCH"); + gpio_request(15, "A_USB_ON"); gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bf1e5d3..0a7b24ba 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -22,8 +22,6 @@ #include #include #include -#include -#include #include #include #include @@ -282,65 +280,16 @@ static void __init apollon_led_init(void) { /* LED0 - AA10 */ omap_cfg_reg(AA10_242X_GPIO13); - omap_request_gpio(LED0_GPIO13); - omap_set_gpio_direction(LED0_GPIO13, 0); - omap_set_gpio_dataout(LED0_GPIO13, 0); + gpio_request(LED0_GPIO13, "LED0"); + gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ omap_cfg_reg(AA6_242X_GPIO14); - omap_request_gpio(LED1_GPIO14); - omap_set_gpio_direction(LED1_GPIO14, 0); - omap_set_gpio_dataout(LED1_GPIO14, 0); + gpio_request(LED1_GPIO14, "LED1"); + gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ omap_cfg_reg(AA4_242X_GPIO15); - omap_request_gpio(LED2_GPIO15); - omap_set_gpio_direction(LED2_GPIO15, 0); - omap_set_gpio_dataout(LED2_GPIO15, 0); -} - -static irqreturn_t apollon_sw_interrupt(int irq, void *ignored) -{ - static unsigned int led0, led1, led2; - - if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) - omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) - omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) - omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); - - return IRQ_HANDLED; -} - -static void __init apollon_sw_init(void) -{ - /* Enter SW - Y11 */ - omap_cfg_reg(Y11_242X_GPIO16); - omap_request_gpio(SW_ENTER_GPIO16); - gpio_direction_input(SW_ENTER_GPIO16); - /* Up SW - AA12 */ - omap_cfg_reg(AA12_242X_GPIO17); - omap_request_gpio(SW_UP_GPIO17); - gpio_direction_input(SW_UP_GPIO17); - /* Down SW - AA8 */ - omap_cfg_reg(AA8_242X_GPIO58); - omap_request_gpio(SW_DOWN_GPIO58); - gpio_direction_input(SW_DOWN_GPIO58); - - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, - IRQF_SHARED, "enter sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, - IRQF_SHARED, "up sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, - IRQF_SHARED, "down sw", - &apollon_sw_interrupt)) - return; + gpio_request(LED2_GPIO15, "LED2"); + gpio_direction_output(LED2_GPIO15, 0); } static void __init apollon_usb_init(void) @@ -357,7 +306,6 @@ static void __init omap_apollon_init(void) u32 v; apollon_led_init(); - apollon_sw_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index aa69727..f6a1345 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (omap_request_gpio(eth_gpio) < 0) { + if (gpio_request(eth_gpio, "smc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", eth_gpio); return; diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 04e68e8..8d9dfe3 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); #include #include -static inline int omap_request_gpio(int gpio) -{ - return gpio_request(gpio, "FIXME"); -} - -static inline void omap_free_gpio(int gpio) -{ - gpio_free(gpio); -} - static inline int gpio_get_value(unsigned gpio) { return __gpio_get_value(gpio); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 96ecc17..77a4f14 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } if (c->gpio_irq) { - if ((r = omap_request_gpio(c->gpio_irq)) < 0) { + if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) { dev_err(&pdev->dev, "Failed to request GPIO%d for " "OneNAND\n", c->gpio_irq); goto err_iounmap; @@ -726,7 +726,7 @@ err_release_dma: free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); err_iounmap: iounmap(c->onenand.base); err_release_mem_region: @@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { free_irq(gpio_to_irq(c->gpio_irq), c); - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); } iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); -- cgit v0.10.2 From 145d9c94b9039efdab6853255f6b916adc793bfd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:09:53 +0200 Subject: ARM: OMAP: Fix compile for beagle Move twl4030 gpio init code to where it should be. Also include twl4030.h. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e5ada0..38c88fb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include #include +#include + #include #include #include @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ -- cgit v0.10.2 From 3a26e3318bc2ceec340f242c6ee7074becdc7219 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:09:53 +0200 Subject: ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS There are no wakeup registers on 15xx, and suspend_wakeup does not exist in the struct gpio_bank. Without this fix we'll get "arch/arm/plat-omap/gpio.c:1792: error: 'struct gpio_bank' has no member named 'suspend_wakeup'" as noted by Russell King. Note that the ifdefs will be cleaned up once the omap gpio code gets split into omap1 and omap2 specific parts. Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 07b6968..f856a90 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) /* FIXME for at least omap2, show pullup/pulldown state */ irqstat = irq_desc[irq].status; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; @@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) (bank->suspend_wakeup & mask) ? " wakeup" : ""); } +#endif seq_printf(s, "\n"); } -- cgit v0.10.2 From 4b3cf44846b6424d4119676ad68d54a62b81e31c Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Thu, 15 Jan 2009 13:09:53 +0200 Subject: ARM: OMAP: Fix DMA CCR programming for request line > 63, v3 Bug in existing code causes synchro control to be set +32 if request line greater than 63 is used. Also clean up the function a bit by removing extra parens and clearing the bits at before write. Reported by Wenbiao Wang. Signed-off-by: Anand Gadiyar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 692d2b4..e77373c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, u32 val; val = dma_read(CCR(lch)); - val &= ~(3 << 19); - if (dma_trigger > 63) - val |= 1 << 20; - if (dma_trigger > 31) - val |= 1 << 19; - - val &= ~(0x1f); - val |= (dma_trigger & 0x1f); + + /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ + val &= ~((3 << 19) | 0x1f); + val |= (dma_trigger & ~0x1f) << 14; + val |= dma_trigger & 0x1f; if (sync_mode & OMAP_DMA_SYNC_FRAME) val |= 1 << 5; -- cgit v0.10.2 From 52628229db37229d9a6eb3af082b17a61736b86c Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 15 Jan 2009 13:09:54 +0200 Subject: ARM: OMAP: remove duplicated #include's Removed duplicated #include's in arch/arm/mach-omap1/board-voiceblue.c Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c224f3c..a765354 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From 9b4a357787c27289b8c9efe916417690473538f7 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Thu, 15 Jan 2009 13:09:54 +0200 Subject: ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23 Adding I2C board info is required for tlvaic23 i2c chip driver. Cc: Jarkko Nikula Signed-off-by: Arun KS Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ff9e67b..d17952f 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -259,8 +259,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { .platform_data = &tps_board, }, + { + I2C_BOARD_INFO("tlv320aic23", 0x1B), + }, /* TODO when driver support is ready: - * - aic23 audio chip at 0x1a * - optionally on Mistral, ov9640 camera sensor at 0x30 */ }; -- cgit v0.10.2 From 3127f8f8595a064b3f1a1837fea2177902589ac3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:09:54 +0200 Subject: ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3 This patch enables writing to McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) for 2430/34xx platforms. It also adds XCCR, RCCR entries in McBSP register configuration structure and bit definitions for both registers. If we enable the writing to CCR registers for 2430/34xx and don't set the default values (setting 0 as a consequence) in ASoC driver, the Transmit/Receive DMA mode gets disabled and the the transmission/reception doesn't happen, ending with a "write error: Input/Output error" when playing with 'aplay'. Also define dummy CCR registers for omap1. Cc: Jarkko Nikula Signed-off-by: Misael Lopez Cruz Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 6a0d1a0..eef873d 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -87,6 +87,10 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C +/* Dummy defines, these are not available on omap1 */ +#define OMAP_MCBSP_REG_XCCR 0x00 +#define OMAP_MCBSP_REG_RCCR 0x00 + #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -231,11 +235,16 @@ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ /*********************** McBSP XCCR bit definitions *************************/ +#define EXTCLKGATE 0x8000 +#define PPCONNECT 0x4000 +#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ +#define XFULL_CYCLE 0x0800 #define DILB 0x0020 #define XDMAEN 0x0008 #define XDISABLE 0x0001 /********************** McBSP RCCR bit definitions *************************/ +#define RFULL_CYCLE 0x0800 #define RDMAEN 0x0008 #define RDISABLE 0x0001 @@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg { u16 rcerh; u16 xcerg; u16 xcerh; + u16 xccr; + u16 rccr; }; typedef enum { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index af33fc7..f2401a8 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr); + OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr); + } } EXPORT_SYMBOL(omap_mcbsp_config); -- cgit v0.10.2 From e999bbe7f1318390e997d13e508e4f16b1b130af Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:55:59 +0200 Subject: ARM: OMAP: Remove unused platform devices, v3 This patch removes old platform devices. Alsa should now be using the ASoC driver. For boards not yet using ASoC, please see sound/soc/omap/osk5912.c. Add dummy aic23_power_up and aic23_power_down functions for 770 to keep things compiling. Remove references to omap_gpio_switch, and unused h2_nand_dev_ready function. This patch is based on an earlier patch by Arun KS. Cc: Jarkko Nikula Signed-off-by: Arun KS Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index b240c5f..0d784a7 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,16 +37,14 @@ #include #include -#include #include +#include #include #include #include #include #include #include -#include -#include static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), @@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = { .id = -1, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H2 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h2_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, @@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_irda_device, &h2_kp_device, &h2_lcd_device, - &h2_mcbsp1_device, }; static void __init h2_init_smc91x(void) @@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H2_NAND_RB_GPIO_PIN); -} - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 5157eea..bf08b6a 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -49,8 +49,6 @@ #include #include #include -#include -#include #define H3_TS_GPIO 48 @@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H3 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h3_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, - &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -static struct omap_gpio_switch h3_gpio_switches[] __initdata = { - { - .name = "mmc_slot", - .gpio = OMAP_MPUIO(1), - .type = OMAP_GPIO_SWITCH_TYPE_COVER, - .debounce_rising = 100, - .debounce_falling = 0, - .notify = h3_mmc_slot_cover_handler, - .notify_data = NULL, - }, -}; - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index af2fb90..071cd02 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -37,8 +37,6 @@ #include #include #include -#include -#include #include static int innovator_keymap[] = { @@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OMAP Innovator AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device innovator_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource innovator_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = { static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, - &innovator_mcbsp1_device, &innovator_kp_device, &innovator1510_lcd_device, &innovator1510_spi_device, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4970c40..af51e0b 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock); */ static int audio_pwr_state = -1; +static inline void aic23_power_up(void) +{ +} +static inline void aic23_power_down(void) +{ +} + /* * audio_pwr_up / down should be called under audio_pwr_lock */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index d17952f..1a16ecb 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -51,8 +51,6 @@ #include #include #include -#include -#include static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OSK AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device osk5912_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *osk5912_devices[] __initdata = { &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, - &osk5912_mcbsp1_device, }; static struct gpio_led tps_leds[] = { diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 00322f4..99f2b43 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -42,8 +42,6 @@ #include #include #include -#include -#include static void __init omap_palmte_init_irq(void) { @@ -203,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), - .xcr2 = XDATDLY(1) | XFIG, - .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), - .pcr0 = SCLKME | FSXP | CLKXP, -}; - -static struct omap_alsa_codec_config palmte_alsa_config = { - .name = "TSC2102 audio", - .mcbsp_regs_alsa = &palmte_mcbsp1_regs, - .codec_configure_dev = NULL, /* tsc2102_configure, */ - .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ - .codec_clock_on = NULL, /* tsc2102_clock_on, */ - .codec_clock_off = NULL, /* tsc2102_clock_off, */ - .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ -}; - #ifdef CONFIG_APM /* * Values measured in 10 minute intervals averaged over 10 samples. diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 5c001af..1cbc127 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -30,7 +30,6 @@ #include #include -#include #include #include #include @@ -40,7 +39,6 @@ #include #include #include -#include #include #include @@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = { .resource = &palmtt_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | - RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | - XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | - FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmTT AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device palmtt_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource palmtt_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = { static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, - &palmtt_mcbsp1_device, &palmtt_kp_device, &palmtt_lcd_device, &palmtt_irda_device, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index cc05257..baf5efb 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -32,7 +32,6 @@ #include #include -#include #include #include #include @@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = { .id = -1, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmZ71 AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate */ - .codec_clock_setup = NULL, /* aic23_clock_setup */ - .codec_clock_on = NULL, /* aic23_clock_on */ - .codec_clock_off = NULL, /* aic23_clock_off */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate */ -}; - -static struct platform_device palmz71_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct omap_backlight_config palmz71_backlight_config = { .default_intensity = 0xa0, }; @@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = { static struct platform_device *devices[] __initdata = { &palmz71_rom_device, &palmz71_kp_device, - &palmz71_mcbsp1_device, &palmz71_lcd_device, &palmz71_irda_device, &palmz71_spi_device, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 09a2422..28c76a1 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -34,13 +34,12 @@ #include #include +#include #include #include #include #include #include -#include -#include #include /* Write to I2C device */ @@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = { .resource = sx1_irda_resources, }; -/*----------- McBSP & Sound -------------------------*/ - -/* Playback interface - McBSP1 */ -static struct omap_mcbsp_reg_cfg mcbsp1_regs = { - .spcr2 = XINTM(3), /* SPCR2=30 */ - .spcr1 = RINTM(3), /* SPCR1=30 */ - .rcr2 = 0, /* RCR2 =00 */ - .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */ - .xcr2 = 0, /* XCR2 = 0 */ - .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ - .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ - .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ - .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /* PCR0 =0f0f */ -}; - -static struct omap_alsa_codec_config sx1_alsa_config = { - .name = "SX1 EGold", - .mcbsp_regs_alsa = &mcbsp1_regs, -}; - -static struct platform_device sx1_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &sx1_alsa_config, - }, -}; - /*----------- MTD -------------------------*/ static struct mtd_partition sx1_partitions[] = { @@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, &sx1_lcd_device, - &sx1_mcbsp1_device, &sx1_irda_device, }; /*-----------------------------------------*/ diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h deleted file mode 100644 index 5ccedac..0000000 --- a/arch/arm/plat-omap/include/mach/aic23.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/aic23.h - * - * Hardware definitions for TI TLV320AIC23 audio codec - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_AIC23_H -#define __ASM_ARCH_AIC23_H - -// Codec TLV320AIC23 -#define LEFT_LINE_VOLUME_ADDR 0x00 -#define RIGHT_LINE_VOLUME_ADDR 0x01 -#define LEFT_CHANNEL_VOLUME_ADDR 0x02 -#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 -#define ANALOG_AUDIO_CONTROL_ADDR 0x04 -#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 -#define POWER_DOWN_CONTROL_ADDR 0x06 -#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 -#define SAMPLE_RATE_CONTROL_ADDR 0x08 -#define DIGITAL_INTERFACE_ACT_ADDR 0x09 -#define RESET_CONTROL_ADDR 0x0F - -// Left (right) line input volume control register -#define LRS_ENABLED 0x0100 -#define LIM_MUTED 0x0080 -#define LIV_DEFAULT 0x0017 -#define LIV_MAX 0x001f -#define LIV_MIN 0x0000 - -// Left (right) channel headphone volume control register -#define LZC_ON 0x0080 -#define LHV_DEFAULT 0x0079 -#define LHV_MAX 0x007f -#define LHV_MIN 0x0000 - -// Analog audio path control register -#define STA_REG(x) ((x)<<6) -#define STE_ENABLED 0x0020 -#define DAC_SELECTED 0x0010 -#define BYPASS_ON 0x0008 -#define INSEL_MIC 0x0004 -#define MICM_MUTED 0x0002 -#define MICB_20DB 0x0001 - -// Digital audio path control register -#define DACM_MUTE 0x0008 -#define DEEMP_32K 0x0002 -#define DEEMP_44K 0x0004 -#define DEEMP_48K 0x0006 -#define ADCHP_ON 0x0001 - -// Power control down register -#define DEVICE_POWER_OFF 0x0080 -#define CLK_OFF 0x0040 -#define OSC_OFF 0x0020 -#define OUT_OFF 0x0010 -#define DAC_OFF 0x0008 -#define ADC_OFF 0x0004 -#define MIC_OFF 0x0002 -#define LINE_OFF 0x0001 - -// Digital audio interface register -#define MS_MASTER 0x0040 -#define LRSWAP_ON 0x0020 -#define LRP_ON 0x0010 -#define IWL_16 0x0000 -#define IWL_20 0x0004 -#define IWL_24 0x0008 -#define IWL_32 0x000C -#define FOR_I2S 0x0002 -#define FOR_DSP 0x0003 - -// Sample rate control register -#define CLKOUT_HALF 0x0080 -#define CLKIN_HALF 0x0040 -#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode -#define USB_CLK_ON 0x0001 -#define SR_MASK 0xf -#define CLKOUT_SHIFT 7 -#define CLKIN_SHIFT 6 -#define SR_SHIFT 2 -#define BOSR_SHIFT 1 - -// Digital interface register -#define ACT_ON 0x0001 - -#define TLV320AIC23ID1 (0x1a) // cs low -#define TLV320AIC23ID2 (0x1b) // cs high - -void aic23_power_up(void); -void aic23_power_down(void); - -#endif /* __ASM_ARCH_AIC23_H */ -- cgit v0.10.2 From 1639058ed1dd0b856a5c34064a990c7827b0e32b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Jan 2009 13:57:48 +0200 Subject: ARM: OMAP: Fix compile for h3 MMC Fix compile for h3 MMC Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h index 14909dc..1888326 100644 --- a/arch/arm/plat-omap/include/mach/board-h3.h +++ b/arch/arm/plat-omap/include/mach/board-h3.h @@ -30,7 +30,9 @@ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ #define OMAP1710_ETHR_START 0x04000300 +#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) + extern void h3_mmc_init(void); -extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ -- cgit v0.10.2 From c9280d681c4093405fc896dc25f81d5ff9de8183 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 15 Jan 2009 17:31:00 +0100 Subject: ALSA: hda - Fix (yet more) STAC925x issues The codec-parsing of STAC925x was utterly broken due to its unique design unlike other STAC codecs. It has a volume control only in NID 0x0e (similar as STAC9200), but the parser assumes that the amp is available on each DAC widget. The patch fixes the whole wrong stories: fix the initial volume, assign the fixed "Master" volume, and avoid to create wrong volume controls. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index c39deeb..faef1ca 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -885,8 +885,8 @@ static struct hda_verb stac92hd71bxx_analog_core_init[] = { static struct hda_verb stac925x_core_init[] = { /* set dac0mux for dac converter */ { 0x06, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute and set max the selector */ - { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f }, + /* mute the master volume */ + { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, {} }; @@ -1138,6 +1138,8 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { }; static struct snd_kcontrol_new stac925x_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT), STAC_INPUT_SOURCE(1), HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT), @@ -3573,13 +3575,12 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = stac92xx_auto_fill_dac_nids(codec); if (err < 0) return err; + err = stac92xx_auto_create_multi_out_ctls(codec, + &spec->autocfg); + if (err < 0) + return err; } - err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg); - - if (err < 0) - return err; - /* setup analog beep controls */ if (spec->anabeep_nid > 0) { err = stac92xx_auto_create_beep_ctls(codec, -- cgit v0.10.2 From c903ff837909ccada51243307d4239f86af40179 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Thu, 15 Jan 2009 12:28:29 -0800 Subject: rcu: move Kconfig menu Move RCU Kconfig options from top-level menu to an "RCU Subsystem" menu under the "General Setup" menu. Signed-off-by: Mike Travis Tested-by: "Paul E. McKenney" Signed-off-by: Ingo Molnar diff --git a/init/Kconfig b/init/Kconfig index a724a14..989f58b 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -238,6 +238,98 @@ config AUDIT_TREE def_bool y depends on AUDITSYSCALL && INOTIFY +menu "RCU Subsystem" + +choice + prompt "RCU Implementation" + default CLASSIC_RCU + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + +endchoice + +config RCU_TRACE + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU + help + This option provides tracing in RCU which presents stats + in debugfs for debugging RCU implementation. + + Say Y here if you want to enable RCU tracing + Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say N if unsure. + +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS + help + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. + +endmenu # "RCU Subsystem" + config IKCONFIG tristate "Kernel .config support" ---help--- @@ -973,90 +1065,3 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool -choice - prompt "RCU Implementation" - default CLASSIC_RCU - -config CLASSIC_RCU - bool "Classic RCU" - help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. - - Select this option if you are unsure. - -config TREE_RCU - bool "Tree-based hierarchical RCU" - help - This option selects the RCU implementation that is - designed for very large SMP system with hundreds or - thousands of CPUs. - -config PREEMPT_RCU - bool "Preemptible RCU" - depends on PREEMPT - help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. - -endchoice - -config RCU_TRACE - bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU - help - This option provides tracing in RCU which presents stats - in debugfs for debugging RCU implementation. - - Say Y here if you want to enable RCU tracing - Say N if you are unsure. - -config RCU_FANOUT - int "Tree-based hierarchical RCU fanout value" - range 2 64 if 64BIT - range 2 32 if !64BIT - depends on TREE_RCU - default 64 if 64BIT - default 32 if !64BIT - help - This option controls the fanout of hierarchical implementations - of RCU, allowing RCU to work efficiently on machines with - large numbers of CPUs. This value must be at least the cube - root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit - systems and up to 262,144 for 64-bit systems. - - Select a specific number if testing RCU itself. - Take the default if unsure. - -config RCU_FANOUT_EXACT - bool "Disable tree-based hierarchical RCU auto-balancing" - depends on TREE_RCU - default n - help - This option forces use of the exact RCU_FANOUT value specified, - regardless of imbalances in the hierarchy. This is useful for - testing RCU itself, and might one day be useful on systems with - strong NUMA behavior. - - Without RCU_FANOUT_EXACT, the code will balance the hierarchy. - - Say N if unsure. - -config TREE_RCU_TRACE - def_bool RCU_TRACE && TREE_RCU - select DEBUG_FS - help - This option provides tracing for the TREE_RCU implementation, - permitting Makefile to trivially select kernel/rcutree_trace.c. - -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU - select DEBUG_FS - help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c. -- cgit v0.10.2 From 4a13ad0bd8869bb491c67918662f9b1852595af5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 14 Jan 2009 12:28:51 +0000 Subject: x86: avoid early crash in disable_local_APIC() E.g. when called due to an early panic. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 0f830e4..d19aa3a 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -895,6 +895,10 @@ void disable_local_APIC(void) { unsigned int value; + /* APIC hasn't been mapped yet */ + if (!apic_phys) + return; + clear_local_APIC(); /* -- cgit v0.10.2 From 18c07cf530cf4aa8b7551801f68ed40db5ee4e45 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 15 Jan 2009 09:51:20 -0600 Subject: x86, UV: cpu_relax in uv_wait_completion The function uv_wait_completion() spins on reads of a memory-mapped register, waiting for completion of BAU hardware replies. It should call "cpu_relax()" between those reads to improve performance on hyperthreaded configurations. Signed-off-by: Cliff Wickman Acked-by: Jack Steiner Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index f885023..6812b82 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -200,6 +200,7 @@ static int uv_wait_completion(struct bau_desc *bau_desc, destination_timeouts = 0; } } + cpu_relax(); } return FLUSH_COMPLETE; } -- cgit v0.10.2 From d3b924d960a808105180d229b4667061123cc4ef Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 15 Jan 2009 20:43:56 -0800 Subject: mlx4_core: Fix min() warning Fix drivers/net/mlx4/profile.c: In function `mlx4_make_profile': drivers/net/mlx4/profile.c:110: warning: comparison of distinct pointer types lacks a cast This happened because num_possible_cpus() was secretly changed by commit ae7a47e7 ("cpumask: make cpumask.h eat its own dogfood.") from returning "int" to (now) returning "unsigned int". I think that was a good change, so we should just swallow the fallout. Cc: "David S. Miller" Cc: Roland Dreier Cc: Yevgeny Petrilin Cc: Jack Morgenstein Cc: Vladimir Sokolovsky Cc: Michael S. Tsirkin Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c index 919fb9e..cebdf32 100644 --- a/drivers/net/mlx4/profile.c +++ b/drivers/net/mlx4/profile.c @@ -107,9 +107,9 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, profile[MLX4_RES_AUXC].num = request->num_qp; profile[MLX4_RES_SRQ].num = request->num_srq; profile[MLX4_RES_CQ].num = request->num_cq; - profile[MLX4_RES_EQ].num = min(dev_cap->max_eqs, - dev_cap->reserved_eqs + - num_possible_cpus() + 1); + profile[MLX4_RES_EQ].num = min_t(unsigned, dev_cap->max_eqs, + dev_cap->reserved_eqs + + num_possible_cpus() + 1); profile[MLX4_RES_DMPT].num = request->num_mpt; profile[MLX4_RES_CMPT].num = MLX4_NUM_CMPTS; profile[MLX4_RES_MTT].num = request->num_mtt; -- cgit v0.10.2 From 169d5f663759ec494aa74a552ce99486235e6e50 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 14 Jan 2009 22:33:31 -0700 Subject: fsldma: print correct IRQ on mpc83xx The mpc83xx variant uses a shared IRQ for all channels, so the individual channel nodes don't have an interrupt property. Fix the code to print the controller IRQ instead if there isn't any for the channel. Acked-by: Timur Tabi Acked-by: Li Yang Signed-off-by: Peter Korsgaard Signed-off-by: Dan Williams diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index b1b45eb..70126a6 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -875,7 +875,8 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, } dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, - compatible, new_fsl_chan->irq); + compatible, + new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq); return 0; -- cgit v0.10.2 From 2de686d227e8869547683de659d5419061c2c518 Mon Sep 17 00:00:00 2001 From: Luke Yelavich Date: Fri, 16 Jan 2009 15:08:02 +1100 Subject: ALSA: hda - add quirks for some 82801H variants to use ALC883_MITAC Add the 82801H variants 1071:8227 and 8086:2503 to use ALC883_MITAC Reference: Ubuntu bug 210865 https://bugs.launchpad.net/bugs/210865 Signed-off-by: Luke Yelavich Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 82dd084..5d249a5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8478,6 +8478,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601), SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG), SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG), + SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL), @@ -8526,6 +8527,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL), + SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC), SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), {} -- cgit v0.10.2 From 49148020bcb6910ce71417bd990a5ce7017f9bd3 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 16 Jan 2009 21:58:10 +1000 Subject: m68k,m68knommu: merge header files Merge header files for m68k and m68knommu to the single location: arch/m68k/include/asm The majority of this patch was the result of the script that is included in the changelog below. The script was originally written by Arnd Bergman and exten by me to cover a few more files. When the header files differed the script uses the following: The original m68k file is named _mm.h [mm for memory manager] The m68knommu file is named _no.h [no for no memory manager] The files uses the following include guard: This include gaurd works as the m68knommu toolchain set the __uClinux__ symbol - so this should work in userspace too. Merging the header files for m68k and m68knommu exposes the (unexpected?) ABI differences thus it is easier to actually identify these and thus to fix them. The commit has been build tested with both a m68k and a m68knommu toolchain - with success. The commit has also been tested with "make headers_check" and this patch fixes make headers_check for m68knommu. The script used: TARGET=arch/m68k/include/asm SOURCE=arch/m68knommu/include/asm INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \ linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \ oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \ shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \ termbits.h termios.h tlb.h types.h user.h" EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \ ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \ sections.h topology.h" NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \ elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \ m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \ m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \ m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \ mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \ mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \ nettel.h quicc_simple.h smp.h" FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \ cacheflush.h checksum.h current.h delay.h div64.h \ dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \ irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \ module.h page.h page_offset.h param.h pci.h pgalloc.h \ pgtable.h processor.h ptrace.h scatterlist.h segment.h \ setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \ thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \ unaligned.h unistd.h" mergefile() { BASE=${1%.h} git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h cat << EOF > ${TARGET}/$1 EOF git add ${TARGET}/$1 } set -e mkdir -p ${TARGET} git mv include/asm-m68k/* ${TARGET} rmdir include/asm-m68k git rm ${SOURCE}/Kbuild for F in $INCLUDE $EQUAL; do git rm ${SOURCE}/$F done for F in $NOMUUFILES; do git mv ${SOURCE}/$F ${TARGET}/$F done for F in $FILES ; do mergefile $F done rmdir arch/m68knommu/include/asm rmdir arch/m68knommu/include Cc: Arnd Bergmann Cc: Geert Uytterhoeven Signed-off-by: Sam Ravnborg Signed-off-by: Greg Ungerer diff --git a/Makefile b/Makefile index c06e250..bab7b84 100644 --- a/Makefile +++ b/Makefile @@ -213,6 +213,10 @@ endif # Where to locate arch specific headers hdr-arch := $(SRCARCH) +ifeq ($(ARCH),m68knommu) + hdr-arch := m68k +endif + KCONFIG_CONFIG ?= .config # SHELL used by kbuild diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild new file mode 100644 index 0000000..52fd96b --- /dev/null +++ b/arch/m68k/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm +header-y += cachectl.h +unifdef-y += swab.h diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h new file mode 100644 index 0000000..a337e56 --- /dev/null +++ b/arch/m68k/include/asm/MC68328.h @@ -0,0 +1,1266 @@ + +/* include/asm-m68knommu/MC68328.h: '328 control registers + * + * Copyright (C) 1999 Vladimir Gurevich + * Bear & Hare Software, Inc. + * + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * + */ + +#ifndef _MC68328_H_ +#define _MC68328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Mask Revision Register + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * Group Base Address Registers + */ +#define GRPBASEA_ADDR 0xfffff100 +#define GRPBASEB_ADDR 0xfffff102 +#define GRPBASEC_ADDR 0xfffff104 +#define GRPBASED_ADDR 0xfffff106 + +#define GRPBASEA WORD_REF(GRPBASEA_ADDR) +#define GRPBASEB WORD_REF(GRPBASEB_ADDR) +#define GRPBASEC WORD_REF(GRPBASEC_ADDR) +#define GRPBASED WORD_REF(GRPBASED_ADDR) + +#define GRPBASE_V 0x0001 /* Valid */ +#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ + +/* + * Group Base Address Mask Registers + */ +#define GRPMASKA_ADDR 0xfffff108 +#define GRPMASKB_ADDR 0xfffff10a +#define GRPMASKC_ADDR 0xfffff10c +#define GRPMASKD_ADDR 0xfffff10e + +#define GRPMASKA WORD_REF(GRPMASKA_ADDR) +#define GRPMASKB WORD_REF(GRPMASKB_ADDR) +#define GRPMASKC WORD_REF(GRPMASKC_ADDR) +#define GRPMASKD WORD_REF(GRPMASKD_ADDR) + +#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ + +/* + * Chip-Select Option Registers (group A) + */ +#define CSA0_ADDR 0xfffff110 +#define CSA1_ADDR 0xfffff114 +#define CSA2_ADDR 0xfffff118 +#define CSA3_ADDR 0xfffff11c + +#define CSA0 LONG_REF(CSA0_ADDR) +#define CSA1 LONG_REF(CSA1_ADDR) +#define CSA2 LONG_REF(CSA2_ADDR) +#define CSA3 LONG_REF(CSA3_ADDR) + +#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSA_WAIT_SHIFT 0 +#define CSA_RO 0x00000008 /* Read-Only */ +#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ +#define CSA_AM_SHIFT 8 +#define CSA_BUSW 0x00010000 /* Bus Width Select */ +#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ +#define CSA_AC_SHIFT 24 + +/* + * Chip-Select Option Registers (group B) + */ +#define CSB0_ADDR 0xfffff120 +#define CSB1_ADDR 0xfffff124 +#define CSB2_ADDR 0xfffff128 +#define CSB3_ADDR 0xfffff12c + +#define CSB0 LONG_REF(CSB0_ADDR) +#define CSB1 LONG_REF(CSB1_ADDR) +#define CSB2 LONG_REF(CSB2_ADDR) +#define CSB3 LONG_REF(CSB3_ADDR) + +#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSB_WAIT_SHIFT 0 +#define CSB_RO 0x00000008 /* Read-Only */ +#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ +#define CSB_AM_SHIFT 8 +#define CSB_BUSW 0x00010000 /* Bus Width Select */ +#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ +#define CSB_AC_SHIFT 24 + +/* + * Chip-Select Option Registers (group C) + */ +#define CSC0_ADDR 0xfffff130 +#define CSC1_ADDR 0xfffff134 +#define CSC2_ADDR 0xfffff138 +#define CSC3_ADDR 0xfffff13c + +#define CSC0 LONG_REF(CSC0_ADDR) +#define CSC1 LONG_REF(CSC1_ADDR) +#define CSC2 LONG_REF(CSC2_ADDR) +#define CSC3 LONG_REF(CSC3_ADDR) + +#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSC_WAIT_SHIFT 0 +#define CSC_RO 0x00000008 /* Read-Only */ +#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ +#define CSC_AM_SHIFT 4 +#define CSC_BUSW 0x00010000 /* Bus Width Select */ +#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ +#define CSC_AC_SHIFT 20 + +/* + * Chip-Select Option Registers (group D) + */ +#define CSD0_ADDR 0xfffff140 +#define CSD1_ADDR 0xfffff144 +#define CSD2_ADDR 0xfffff148 +#define CSD3_ADDR 0xfffff14c + +#define CSD0 LONG_REF(CSD0_ADDR) +#define CSD1 LONG_REF(CSD1_ADDR) +#define CSD2 LONG_REF(CSD2_ADDR) +#define CSD3 LONG_REF(CSD3_ADDR) + +#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ +#define CSD_WAIT_SHIFT 0 +#define CSD_RO 0x00000008 /* Read-Only */ +#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ +#define CSD_AM_SHIFT 4 +#define CSD_BUSW 0x00010000 /* Bus Width Select */ +#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ +#define CSD_AC_SHIFT 20 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_PIXCLK_SEL_SHIFT 11 + +/* 'EZ328-compatible definitions */ +#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK +#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADRR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ +#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ +#define UART_IRQ_NUM 2 /* UART interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define INT4_IRQ_NUM 12 /* External INT4 */ +#define INT5_IRQ_NUM 13 /* External INT5 */ +#define INT6_IRQ_NUM 14 /* External INT6 */ +#define INT7_IRQ_NUM 15 /* External INT7 */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define PEN_IRQ_NUM 20 /* Pen Interrupt */ +#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ +#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ +#define IRQ7_IRQ_NUM 23 /* IRQ7 */ + +/* '328-compatible definitions */ +#define SPI_IRQ_NUM SPIM_IRQ_NUM +#define TMR_IRQ_NUM TMR1_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ +#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ +#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ +#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ +#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ +#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ +#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ +#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define IMR_MSPI IMR_MSPIM +#define IMR_MTMR IMR_MTMR1 + +/* + * Interrupt Wake-Up Enable Register + */ +#define IWR_ADDR 0xfffff308 +#define IWR LONG_REF(IWR_ADDR) + +#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define ISR_SPI ISR_SPIM +#define ISR_TMR ISR_TMR1 + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff310 +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ +#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ +#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ +#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ +#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ +#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ +#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ + +/* 'EZ328-compatible definitions */ +#define IPR_SPI IPR_SPIM +#define IPR_TMR IPR_TMR1 + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PASEL_ADDR 0xfffff403 /* Port A Select register */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PASEL BYTE_REF(PASEL_ADDR) + +#define PA(x) (1 << (x)) +#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ + +#define PA_A16 PA(0) /* Use A16 as PA(0) */ +#define PA_A17 PA(1) /* Use A17 as PA(1) */ +#define PA_A18 PA(2) /* Use A18 as PA(2) */ +#define PA_A19 PA(3) /* Use A19 as PA(3) */ +#define PA_A20 PA(4) /* Use A20 as PA(4) */ +#define PA_A21 PA(5) /* Use A21 as PA(5) */ +#define PA_A22 PA(6) /* Use A22 as PA(6) */ +#define PA_A23 PA(7) /* Use A23 as PA(7) */ + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) +#define PB_D(x) PB(x) /* This is specific to port B only */ + +#define PB_D0 PB(0) /* Use D0 as PB(0) */ +#define PB_D1 PB(1) /* Use D1 as PB(1) */ +#define PB_D2 PB(2) /* Use D2 as PB(2) */ +#define PB_D3 PB(3) /* Use D3 as PB(3) */ +#define PB_D4 PB(4) /* Use D4 as PB(4) */ +#define PB_D5 PB(5) /* Use D5 as PB(5) */ +#define PB_D6 PB(6) /* Use D6 as PB(6) */ +#define PB_D7 PB(7) /* Use D7 as PB(7) */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_WE PC(6) /* Use WE as PC(6) */ +#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ +#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ +#define PC_LDS PC(2) /* Use LDS as PC(2) */ +#define PC_UDS PC(1) /* Use UDS as PC(1) */ +#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) +#define PD_KB(x) PD(x) /* This is specific for Port D only */ + +#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ +#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ +#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ +#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ +#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ +#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ +#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ +#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ +#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ +#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ +#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ +#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ +#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ +#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) +#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ + +#define PF_A24 PF(0) /* Use A24 as PF(0) */ +#define PF_A25 PF(1) /* Use A25 as PF(1) */ +#define PF_A26 PF(2) /* Use A26 as PF(2) */ +#define PF_A27 PF(3) /* Use A27 as PF(3) */ +#define PF_A28 PF(4) /* Use A28 as PF(4) */ +#define PF_A29 PF(5) /* Use A29 as PF(5) */ +#define PF_A30 PF(6) /* Use A30 as PF(6) */ +#define PF_A31 PF(7) /* Use A31 as PF(7) */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ +#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ +#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ +#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ +#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ +#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ +#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ +#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ + +/* + * Port J + */ +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ + +/* + * Port K + */ +#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ +#define PKDATA_ADDR 0xfffff441 /* Port K data register */ +#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ +#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ + +#define PKDIR BYTE_REF(PKDIR_ADDR) +#define PKDATA BYTE_REF(PKDATA_ADDR) +#define PKPUEN BYTE_REF(PKPUEN_ADDR) +#define PKSEL BYTE_REF(PKSEL_ADDR) + +#define PK(x) (1 << (x)) + +/* + * Port M + */ +#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ +#define PMDATA_ADDR 0xfffff439 /* Port M data register */ +#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ +#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ + +#define PMDIR BYTE_REF(PMDIR_ADDR) +#define PMDATA BYTE_REF(PMDATA_ADDR) +#define PMPUEN BYTE_REF(PMPUEN_ADDR) +#define PMSEL BYTE_REF(PMSEL_ADDR) + +#define PM(x) (1 << (x)) + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_PWMEN 0x0010 /* Enable PWM */ +#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ +#define PWMC_PIN 0x0080 /* Current PWM output pin status */ +#define PWMC_LOAD 0x0100 /* Force a new period */ +#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* 'EZ328-compatible definitions */ +#define PWMC_EN PWMC_PWMEN + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff502 +#define PWMP WORD_REF(PWMP_ADDR) + +/* + * PWM Width Register + */ +#define PWMW_ADDR 0xfffff504 +#define PWMW WORD_REF(PWMW_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff506 +#define PWMCNT WORD_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timers + * + **********/ + +/* + * Timer Unit 1 and 2 Control Registers + */ +#define TCTL1_ADDR 0xfffff600 +#define TCTL1 WORD_REF(TCTL1_ADDR) +#define TCTL2_ADDR 0xfffff60c +#define TCTL2 WORD_REF(TCTL2_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* 'EZ328-compatible definitions */ +#define TCTL_ADDR TCTL1_ADDR +#define TCTL TCTL1 + +/* + * Timer Unit 1 and 2 Prescaler Registers + */ +#define TPRER1_ADDR 0xfffff602 +#define TPRER1 WORD_REF(TPRER1_ADDR) +#define TPRER2_ADDR 0xfffff60e +#define TPRER2 WORD_REF(TPRER2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TPRER_ADDR TPRER1_ADDR +#define TPRER TPRER1 + +/* + * Timer Unit 1 and 2 Compare Registers + */ +#define TCMP1_ADDR 0xfffff604 +#define TCMP1 WORD_REF(TCMP1_ADDR) +#define TCMP2_ADDR 0xfffff610 +#define TCMP2 WORD_REF(TCMP2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCMP_ADDR TCMP1_ADDR +#define TCMP TCMP1 + +/* + * Timer Unit 1 and 2 Capture Registers + */ +#define TCR1_ADDR 0xfffff606 +#define TCR1 WORD_REF(TCR1_ADDR) +#define TCR2_ADDR 0xfffff612 +#define TCR2 WORD_REF(TCR2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCR_ADDR TCR1_ADDR +#define TCR TCR1 + +/* + * Timer Unit 1 and 2 Counter Registers + */ +#define TCN1_ADDR 0xfffff608 +#define TCN1 WORD_REF(TCN1_ADDR) +#define TCN2_ADDR 0xfffff614 +#define TCN2 WORD_REF(TCN2_ADDR) + +/* 'EZ328-compatible definitions */ +#define TCN_ADDR TCN1_ADDR +#define TCN TCN + +/* + * Timer Unit 1 and 2 Status Registers + */ +#define TSTAT1_ADDR 0xfffff60a +#define TSTAT1 WORD_REF(TSTAT1_ADDR) +#define TSTAT2_ADDR 0xfffff616 +#define TSTAT2 WORD_REF(TSTAT2_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* 'EZ328-compatible definitions */ +#define TSTAT_ADDR TSTAT1_ADDR +#define TSTAT TSTAT1 + +/* + * Watchdog Compare Register + */ +#define WRR_ADDR 0xfffff61a +#define WRR WORD_REF(WRR_ADDR) + +/* + * Watchdog Counter Register + */ +#define WCN_ADDR 0xfffff61c +#define WCN WORD_REF(WCN_ADDR) + +/* + * Watchdog Control and Status Register + */ +#define WCSR_ADDR 0xfffff618 +#define WCSR WORD_REF(WCSR_ADDR) + +#define WCSR_WDEN 0x0001 /* Watchdog Enable */ +#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ +#define WCSR_WRST 0x0004 /* Watchdog Reset */ + +/********** + * + * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) + * + **********/ + +/* + * SPI Slave Register + */ +#define SPISR_ADDR 0xfffff700 +#define SPISR WORD_REF(SPISR_ADDR) + +#define SPISR_DATA_ADDR 0xfffff701 +#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) + +#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ +#define SPISR_DATA_SHIFT 0 +#define SPISR_SPISEN 0x0100 /* SPIS module enable */ +#define SPISR_POL 0x0200 /* SPSCLK polarity control */ +#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ +#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ +#define SPISR_DATARDY 0x1000 /* Data ready */ +#define SPISR_ENPOL 0x2000 /* Enable Polarity */ +#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ +#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* 'EZ328-compatible definitions */ +#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ +#define SPIMCONT_ENABLE SPIMCONT_SPIMEN +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ +#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ +#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ +#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ +#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ +#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UARTEN 0x8000 /* UART Enable */ + +/* 'EZ328-compatible definitions */ +#define USTCNT_TXAE USTCNT_TXAVAILEN +#define USTCNT_TXHE USTCNT_TXHALFEN +#define USTCNT_TXEE USTCNT_TXEMPTYEN +#define USTCNT_RXRE USTCNT_RXREADYEN +#define USTCNT_RXHE USTCNT_RXHALFEN +#define USTCNT_RXFE USTCNT_RXFULLEN +#define USTCNT_CTSD USTCNT_CTSDELTAEN +#define USTCNT_ODD USTCNT_ODD_EVEN +#define USTCNT_PEN USTCNT_PARITYEN +#define USTCNT_CLKM USTCNT_CLKMODE +#define USTCNT_UEN USTCNT_UARTEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ +#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ +#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ +#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STATUS 0x0200 /* CTS State */ +#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* 'EZ328-compatible definitions */ +#define UTX_CTS_STAT UTX_CTS_STATUS +#define UTX_NOCTS UTX_IGNORE_CTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef volatile struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int pad1; + volatile unsigned short int pad2; + volatile unsigned short int pad3; +} __attribute__((packed)) m68328_uart; + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with 'EZ328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x02 +#define LPICF_PBSIZ_4 0x04 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ +#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ +#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 2 +#define LCKCON_DMA16 0x40 /* DMA burst length */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* 'EZ328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Last Buffer Address Register + */ +#define LLBAR_ADDR 0xfffffa29 +#define LLBAR BYTE_REF(LLBAR_ADDR) + +#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ +#define LLBAR_LBAR_SHIFT 0 + +/* + * LCD Octet Terminal Count Register + */ +#define LOTCR_ADDR 0xfffffa2b +#define LOTCR BYTE_REF(LOTCR_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ +#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa32 +#define LGPMR WORD_REF(LGPMR_ADDR) + +#define LGPMR_GLEVEL3_MASK 0x000f +#define LGPMR_GLEVEL3_SHIFT 0 +#define LGPMR_GLEVEL2_MASK 0x00f0 +#define LGPMR_GLEVEL2_SHIFT 4 +#define LGPMR_GLEVEL0_MASK 0x0f00 +#define LGPMR_GLEVEL0_SHIFT 8 +#define LGPMR_GLEVEL1_MASK 0xf000 +#define LGPMR_GLEVEL1_SHIFT 12 + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_384 0x0020 /* Crystal Selection */ +#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ + +/* 'EZ328-compatible definitions */ +#define RTCCTL_XTL RTCCTL_384 +#define RTCCTL_EN RTCCTL_ENABLE + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH) + +#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +#endif /* _MC68328_H_ */ diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h new file mode 100644 index 0000000..6bb8f02 --- /dev/null +++ b/arch/m68k/include/asm/MC68332.h @@ -0,0 +1,152 @@ + +/* include/asm-m68knommu/MC68332.h: '332 control registers + * + * Copyright (C) 1998 Kenneth Albanowski , + * + */ + +#ifndef _MC68332_H_ +#define _MC68332_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) + +#define PORTE_ADDR 0xfffa11 +#define PORTE BYTE_REF(PORTE_ADDR) +#define DDRE_ADDR 0xfffa15 +#define DDRE BYTE_REF(DDRE_ADDR) +#define PEPAR_ADDR 0xfffa17 +#define PEPAR BYTE_REF(PEPAR_ADDR) + +#define PORTF_ADDR 0xfffa19 +#define PORTF BYTE_REF(PORTF_ADDR) +#define DDRF_ADDR 0xfffa1d +#define DDRF BYTE_REF(DDRF_ADDR) +#define PFPAR_ADDR 0xfffa1f +#define PFPAR BYTE_REF(PFPAR_ADDR) + +#define PORTQS_ADDR 0xfffc15 +#define PORTQS BYTE_REF(PORTQS_ADDR) +#define DDRQS_ADDR 0xfffc17 +#define DDRQS BYTE_REF(DDRQS_ADDR) +#define PQSPAR_ADDR 0xfffc16 +#define PQSPAR BYTE_REF(PQSPAR_ADDR) + +#define CSPAR0_ADDR 0xFFFA44 +#define CSPAR0 WORD_REF(CSPAR0_ADDR) +#define CSPAR1_ADDR 0xFFFA46 +#define CSPAR1 WORD_REF(CSPAR1_ADDR) +#define CSARBT_ADDR 0xFFFA48 +#define CSARBT WORD_REF(CSARBT_ADDR) +#define CSOPBT_ADDR 0xFFFA4A +#define CSOPBT WORD_REF(CSOPBT_ADDR) +#define CSBAR0_ADDR 0xFFFA4C +#define CSBAR0 WORD_REF(CSBAR0_ADDR) +#define CSOR0_ADDR 0xFFFA4E +#define CSOR0 WORD_REF(CSOR0_ADDR) +#define CSBAR1_ADDR 0xFFFA50 +#define CSBAR1 WORD_REF(CSBAR1_ADDR) +#define CSOR1_ADDR 0xFFFA52 +#define CSOR1 WORD_REF(CSOR1_ADDR) +#define CSBAR2_ADDR 0xFFFA54 +#define CSBAR2 WORD_REF(CSBAR2_ADDR) +#define CSOR2_ADDR 0xFFFA56 +#define CSOR2 WORD_REF(CSOR2_ADDR) +#define CSBAR3_ADDR 0xFFFA58 +#define CSBAR3 WORD_REF(CSBAR3_ADDR) +#define CSOR3_ADDR 0xFFFA5A +#define CSOR3 WORD_REF(CSOR3_ADDR) +#define CSBAR4_ADDR 0xFFFA5C +#define CSBAR4 WORD_REF(CSBAR4_ADDR) +#define CSOR4_ADDR 0xFFFA5E +#define CSOR4 WORD_REF(CSOR4_ADDR) +#define CSBAR5_ADDR 0xFFFA60 +#define CSBAR5 WORD_REF(CSBAR5_ADDR) +#define CSOR5_ADDR 0xFFFA62 +#define CSOR5 WORD_REF(CSOR5_ADDR) +#define CSBAR6_ADDR 0xFFFA64 +#define CSBAR6 WORD_REF(CSBAR6_ADDR) +#define CSOR6_ADDR 0xFFFA66 +#define CSOR6 WORD_REF(CSOR6_ADDR) +#define CSBAR7_ADDR 0xFFFA68 +#define CSBAR7 WORD_REF(CSBAR7_ADDR) +#define CSOR7_ADDR 0xFFFA6A +#define CSOR7 WORD_REF(CSOR7_ADDR) +#define CSBAR8_ADDR 0xFFFA6C +#define CSBAR8 WORD_REF(CSBAR8_ADDR) +#define CSOR8_ADDR 0xFFFA6E +#define CSOR8 WORD_REF(CSOR8_ADDR) +#define CSBAR9_ADDR 0xFFFA70 +#define CSBAR9 WORD_REF(CSBAR9_ADDR) +#define CSOR9_ADDR 0xFFFA72 +#define CSOR9 WORD_REF(CSOR9_ADDR) +#define CSBAR10_ADDR 0xFFFA74 +#define CSBAR10 WORD_REF(CSBAR10_ADDR) +#define CSOR10_ADDR 0xFFFA76 +#define CSOR10 WORD_REF(CSOR10_ADDR) + +#define CSOR_MODE_ASYNC 0x0000 +#define CSOR_MODE_SYNC 0x8000 +#define CSOR_MODE_MASK 0x8000 +#define CSOR_BYTE_DISABLE 0x0000 +#define CSOR_BYTE_UPPER 0x4000 +#define CSOR_BYTE_LOWER 0x2000 +#define CSOR_BYTE_BOTH 0x6000 +#define CSOR_BYTE_MASK 0x6000 +#define CSOR_RW_RSVD 0x0000 +#define CSOR_RW_READ 0x0800 +#define CSOR_RW_WRITE 0x1000 +#define CSOR_RW_BOTH 0x1800 +#define CSOR_RW_MASK 0x1800 +#define CSOR_STROBE_DS 0x0400 +#define CSOR_STROBE_AS 0x0000 +#define CSOR_STROBE_MASK 0x0400 +#define CSOR_DSACK_WAIT(x) (wait << 6) +#define CSOR_DSACK_FTERM (14 << 6) +#define CSOR_DSACK_EXTERNAL (15 << 6) +#define CSOR_DSACK_MASK 0x03c0 +#define CSOR_SPACE_CPU 0x0000 +#define CSOR_SPACE_USER 0x0010 +#define CSOR_SPACE_SU 0x0020 +#define CSOR_SPACE_BOTH 0x0030 +#define CSOR_SPACE_MASK 0x0030 +#define CSOR_IPL_ALL 0x0000 +#define CSOR_IPL_PRIORITY(x) (x << 1) +#define CSOR_IPL_MASK 0x000e +#define CSOR_AVEC_ON 0x0001 +#define CSOR_AVEC_OFF 0x0000 +#define CSOR_AVEC_MASK 0x0001 + +#define CSBAR_ADDR(x) ((addr >> 11) << 3) +#define CSBAR_ADDR_MASK 0xfff8 +#define CSBAR_BLKSIZE_2K 0x0000 +#define CSBAR_BLKSIZE_8K 0x0001 +#define CSBAR_BLKSIZE_16K 0x0002 +#define CSBAR_BLKSIZE_64K 0x0003 +#define CSBAR_BLKSIZE_128K 0x0004 +#define CSBAR_BLKSIZE_256K 0x0005 +#define CSBAR_BLKSIZE_512K 0x0006 +#define CSBAR_BLKSIZE_1M 0x0007 +#define CSBAR_BLKSIZE_MASK 0x0007 + +#define CSPAR_DISC 0 +#define CSPAR_ALT 1 +#define CSPAR_CS8 2 +#define CSPAR_CS16 3 +#define CSPAR_MASK 3 + +#define CSPAR0_CSBOOT(x) (x << 0) +#define CSPAR0_CS0(x) (x << 2) +#define CSPAR0_CS1(x) (x << 4) +#define CSPAR0_CS2(x) (x << 6) +#define CSPAR0_CS3(x) (x << 8) +#define CSPAR0_CS4(x) (x << 10) +#define CSPAR0_CS5(x) (x << 12) + +#define CSPAR1_CS6(x) (x << 0) +#define CSPAR1_CS7(x) (x << 2) +#define CSPAR1_CS8(x) (x << 4) +#define CSPAR1_CS9(x) (x << 6) +#define CSPAR1_CS10(x) (x << 8) + +#endif diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h new file mode 100644 index 0000000..69b7f91 --- /dev/null +++ b/arch/m68k/include/asm/MC68EZ328.h @@ -0,0 +1,1253 @@ + +/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers + * + * Copyright (C) 1999 Vladimir Gurevich + * Bear & Hare Software, Inc. + * + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * + */ + +#ifndef _MC68EZ328_H_ +#define _MC68EZ328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/* + * Chip Select Group Base Registers + */ +#define CSGBA_ADDR 0xfffff100 +#define CSGBB_ADDR 0xfffff102 + +#define CSGBC_ADDR 0xfffff104 +#define CSGBD_ADDR 0xfffff106 + +#define CSGBA WORD_REF(CSGBA_ADDR) +#define CSGBB WORD_REF(CSGBB_ADDR) +#define CSGBC WORD_REF(CSGBC_ADDR) +#define CSGBD WORD_REF(CSGBD_ADDR) + +/* + * Chip Select Registers + */ +#define CSA_ADDR 0xfffff110 +#define CSB_ADDR 0xfffff112 +#define CSC_ADDR 0xfffff114 +#define CSD_ADDR 0xfffff116 + +#define CSA WORD_REF(CSA_ADDR) +#define CSB WORD_REF(CSB_ADDR) +#define CSC WORD_REF(CSC_ADDR) +#define CSD WORD_REF(CSD_ADDR) + +#define CSA_EN 0x0001 /* Chip-Select Enable */ +#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSA_SIZ_SHIFT 1 +#define CSA_WS_MASK 0x0070 /* Wait State */ +#define CSA_WS_SHIFT 4 +#define CSA_BSW 0x0080 /* Data Bus Width */ +#define CSA_FLASH 0x0100 /* FLASH Memory Support */ +#define CSA_RO 0x8000 /* Read-Only */ + +#define CSB_EN 0x0001 /* Chip-Select Enable */ +#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSB_SIZ_SHIFT 1 +#define CSB_WS_MASK 0x0070 /* Wait State */ +#define CSB_WS_SHIFT 4 +#define CSB_BSW 0x0080 /* Data Bus Width */ +#define CSB_FLASH 0x0100 /* FLASH Memory Support */ +#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSB_UPSIZ_SHIFT 11 +#define CSB_ROP 0x2000 /* Readonly if protected */ +#define CSB_SOP 0x4000 /* Supervisor only if protected */ +#define CSB_RO 0x8000 /* Read-Only */ + +#define CSC_EN 0x0001 /* Chip-Select Enable */ +#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSC_SIZ_SHIFT 1 +#define CSC_WS_MASK 0x0070 /* Wait State */ +#define CSC_WS_SHIFT 4 +#define CSC_BSW 0x0080 /* Data Bus Width */ +#define CSC_FLASH 0x0100 /* FLASH Memory Support */ +#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSC_UPSIZ_SHIFT 11 +#define CSC_ROP 0x2000 /* Readonly if protected */ +#define CSC_SOP 0x4000 /* Supervisor only if protected */ +#define CSC_RO 0x8000 /* Read-Only */ + +#define CSD_EN 0x0001 /* Chip-Select Enable */ +#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSD_SIZ_SHIFT 1 +#define CSD_WS_MASK 0x0070 /* Wait State */ +#define CSD_WS_SHIFT 4 +#define CSD_BSW 0x0080 /* Data Bus Width */ +#define CSD_FLASH 0x0100 /* FLASH Memory Support */ +#define CSD_DRAM 0x0200 /* Dram Selection */ +#define CSD_COMB 0x0400 /* Combining */ +#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSD_UPSIZ_SHIFT 11 +#define CSD_ROP 0x2000 /* Readonly if protected */ +#define CSD_SOP 0x4000 /* Supervisor only if protected */ +#define CSD_RO 0x8000 /* Read-Only */ + +/* + * Emulation Chip-Select Register + */ +#define EMUCS_ADDR 0xfffff118 +#define EMUCS WORD_REF(EMUCS_ADDR) + +#define EMUCS_WS_MASK 0x0070 +#define EMUCS_WS_SHIFT 4 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_PRESC 0x0020 /* VCO prescaler */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_LCDCLK_SEL_SHIFT 11 + +/* '328-compatible definitions */ +#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK +#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADDR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPI_IRQ_NUM 0 /* SPI interrupt */ +#define TMR_IRQ_NUM 1 /* Timer interrupt */ +#define UART_IRQ_NUM 2 /* UART interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define IRQ5_IRQ_NUM 20 /* IRQ5 */ +#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ +#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define SPIM_IRQ_NUM SPI_IRQ_NUM +#define TMR1_IRQ_NUM TMR_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ +#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ +#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ +#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IMR_MSPIM IMR_MSPI +#define IMR_MTMR1 IMR_MTMR + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define ISR_SPIM ISR_SPI +#define ISR_TMR1 ISR_TMR + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff30c +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IPR_SPIM IPR_SPI +#define IPR_TMR1 IPR_TMR + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PAPUEN BYTE_REF(PAPUEN_ADDR) + +#define PA(x) (1 << (x)) + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBPUEN BYTE_REF(PBPUEN_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) + +#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ +#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ +#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ +#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ +#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ +#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ +#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ +#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCPDEN BYTE_REF(PCPDEN_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_LD0 0x01 /* Use LD0 as PC[0] */ +#define PC_LD1 0x02 /* Use LD1 as PC[1] */ +#define PC_LD2 0x04 /* Use LD2 as PC[2] */ +#define PC_LD3 0x08 /* Use LD3 as PC[3] */ +#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ +#define PC_LLP 0x20 /* Use LLP as PC[5] */ +#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ +#define PC_LACD 0x80 /* Use LACD as PC[7] */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDSEL BYTE_REF(PDSEL_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDKBEN BYTE_REF(PDKBEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) + +#define PD_INT0 0x01 /* Use INT0 as PD[0] */ +#define PD_INT1 0x02 /* Use INT1 as PD[1] */ +#define PD_INT2 0x04 /* Use INT2 as PD[2] */ +#define PD_INT3 0x08 /* Use INT3 as PD[3] */ +#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ +#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ +#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ +#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ +#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ +#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ +#define PE_DWE 0x08 /* Use DWE as PE[3] */ +#define PE_RXD 0x10 /* Use RXD as PE[4] */ +#define PE_TXD 0x20 /* Use TXD as PE[5] */ +#define PE_RTS 0x40 /* Use RTS as PE[6] */ +#define PE_CTS 0x80 /* Use CTS as PE[7] */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) + +#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ +#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ +#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ +#define PF_A20 0x08 /* Use A20 as PF[3] */ +#define PF_A21 0x10 /* Use A21 as PF[4] */ +#define PF_A22 0x20 /* Use A22 as PF[5] */ +#define PF_A23 0x40 /* Use A23 as PF[6] */ +#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ +#define PG_A0 0x02 /* Use A0 as PG[1] */ +#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ +#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ +#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ +#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ +#define PWMC_REPEAT_SHIFT 2 +#define PWMC_EN 0x0010 /* Enable PWM */ +#define PMNC_FIFOAV 0x0020 /* FIFO Available */ +#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ +#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ +#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ +#define PWMC_PRESCALER_SHIFT 8 +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* '328-compatible definitions */ +#define PWMC_PWMEN PWMC_EN + +/* + * PWM Sample Register + */ +#define PWMS_ADDR 0xfffff502 +#define PWMS WORD_REF(PWMS_ADDR) + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff504 +#define PWMP BYTE_REF(PWMP_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff505 +#define PWMCNT BYTE_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timer + * + **********/ + +/* + * Timer Control register + */ +#define TCTL_ADDR 0xfffff600 +#define TCTL WORD_REF(TCTL_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* '328-compatible definitions */ +#define TCTL1_ADDR TCTL_ADDR +#define TCTL1 TCTL + +/* + * Timer Prescaler Register + */ +#define TPRER_ADDR 0xfffff602 +#define TPRER WORD_REF(TPRER_ADDR) + +/* '328-compatible definitions */ +#define TPRER1_ADDR TPRER_ADDR +#define TPRER1 TPRER + +/* + * Timer Compare Register + */ +#define TCMP_ADDR 0xfffff604 +#define TCMP WORD_REF(TCMP_ADDR) + +/* '328-compatible definitions */ +#define TCMP1_ADDR TCMP_ADDR +#define TCMP1 TCMP + +/* + * Timer Capture register + */ +#define TCR_ADDR 0xfffff606 +#define TCR WORD_REF(TCR_ADDR) + +/* '328-compatible definitions */ +#define TCR1_ADDR TCR_ADDR +#define TCR1 TCR + +/* + * Timer Counter Register + */ +#define TCN_ADDR 0xfffff608 +#define TCN WORD_REF(TCN_ADDR) + +/* '328-compatible definitions */ +#define TCN1_ADDR TCN_ADDR +#define TCN1 TCN + +/* + * Timer Status Register + */ +#define TSTAT_ADDR 0xfffff60a +#define TSTAT WORD_REF(TSTAT_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* '328-compatible definitions */ +#define TSTAT1_ADDR TSTAT_ADDR +#define TSTAT1 TSTAT + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* '328-compatible definitions */ +#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ +#define SPIMCONT_SPIMEN SPIMCONT_ENABLE + +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ +#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ +#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ +#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ +#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD 0x0400 /* Odd Parity */ +#define USTCNT_PEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UEN 0x8000 /* UART Enable */ + +/* '328-compatible definitions */ +#define USTCNT_TXAVAILEN USTCNT_TXAE +#define USTCNT_TXHALFEN USTCNT_TXHE +#define USTCNT_TXEMPTYEN USTCNT_TXEE +#define USTCNT_RXREADYEN USTCNT_RXRE +#define USTCNT_RXHALFEN USTCNT_RXHE +#define USTCNT_RXFULLEN USTCNT_RXFE +#define USTCNT_CTSDELTAEN USTCNT_CTSD +#define USTCNT_ODD_EVEN USTCNT_ODD +#define USTCNT_PARITYEN USTCNT_PEN +#define USTCNT_CLKMODE USTCNT_CLKM +#define USTCNT_UARTEN USTCNT_UEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STAT 0x0200 /* CTS State */ +#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ +#define UTX_NOCTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* '328-compatible definitions */ +#define UTX_CTS_STATUS UTX_CTS_STAT +#define UTX_IGNORE_CTS UTX_NOCTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ +#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ +#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ + +/* + * UART Non-integer Prescaler Register + */ +#define NIPR_ADDR 0xfffff90a +#define NIPR WORD_REF(NIPR_ADDR) + +#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ +#define NIPR_STEP_VALUE_SHIFT 0 +#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ +#define NIPR_SELECT_SHIFT 8 +#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef volatile struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int nipr; + volatile unsigned short int pad1; + volatile unsigned short int pad2; +} __attribute__((packed)) m68328_uart; + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with '328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_GS_GRAY_16 0x02 +#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x04 +#define LPICF_PBSIZ_4 0x08 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 0 +#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* '328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Refresh Rate Adjustment Register + */ +#define LRRA_ADDR 0xfffffa29 +#define LRRA BYTE_REF(LRRA_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa33 +#define LGPMR BYTE_REF(LGPMR_ADDR) + +#define LGPMR_G1_MASK 0x0f +#define LGPMR_G1_SHIFT 0 +#define LGPMR_G2_MASK 0xf0 +#define LGPMR_G2_SHIFT 4 + +/* + * PWM Contrast Control Register + */ +#define PWMR_ADDR 0xfffffa36 +#define PWMR WORD_REF(PWMR_ADDR) + +#define PWMR_PW_MASK 0x00ff /* Pulse Width */ +#define PWMR_PW_SHIFT 0 +#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ +#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ +#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ +#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ +#define PWMR_SRC_LCD 0x4000 /* LCD clock */ + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * Watchdog Timer Register + */ +#define WATCHDOG_ADDR 0xfffffb0a +#define WATCHDOG WORD_REF(WATCHDOG_ADDR) + +#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ +#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ +#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ +#define WATCHDOG_CNT_SHIFT 8 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_XTL 0x0020 /* Crystal Selection */ +#define RTCCTL_EN 0x0080 /* RTC Enable */ + +/* '328-compatible definitions */ +#define RTCCTL_384 RTCCTL_XTL +#define RTCCTL_ENABLE RTCCTL_EN + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ +#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ +#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ +#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ +#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ +#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ +#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ +#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ +#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ +#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ +#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ +#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ +#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ +#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ +#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ +#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ +#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ +#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ +#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH) + +#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +/* + * RTC Day Count Register + */ +#define DAYR_ADDR 0xfffffb1a +#define DAYR WORD_REF(DAYR_ADDR) + +#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ +#define DAYR_DAYS_SHIFT 0 + +/* + * RTC Day Alarm Register + */ +#define DAYALARM_ADDR 0xfffffb1c +#define DAYALARM WORD_REF(DAYALARM_ADDR) + +#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ +#define DAYALARM_DAYSAL_SHIFT 0 + +/********** + * + * 0xFFFFFCxx -- DRAM Controller + * + **********/ + +/* + * DRAM Memory Configuration Register + */ +#define DRAMMC_ADDR 0xfffffc00 +#define DRAMMC WORD_REF(DRAMMC_ADDR) + +#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ +#define DRAMMC_ROW12_PA10 0x0000 +#define DRAMMC_ROW12_PA21 0x4000 +#define DRAMMC_ROW12_PA23 0x8000 +#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ +#define DRAMMC_ROW0_PA11 0x0000 +#define DRAMMC_ROW0_PA22 0x1000 +#define DRAMMC_ROW0_PA23 0x2000 +#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ +#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ +#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ +#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ +#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ +#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ +#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ +#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ +#define DRAMMC_REF_SHIFT 0 + +/* + * DRAM Control Register + */ +#define DRAMC_ADDR 0xfffffc02 +#define DRAMC WORD_REF(DRAMC_ADDR) + +#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ +#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ +#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ +#define DRAMC_SLW 0x0008 /* Slow RAM */ +#define DRAMC_LSP 0x0010 /* Light Sleep */ +#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ +#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ +#define DRAMC_WS_SHIFT 6 +#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ +#define DRAMC_PGSZ_SHIFT 8 +#define DRAMC_PGSZ_256K 0x0000 +#define DRAMC_PGSZ_512K 0x0100 +#define DRAMC_PGSZ_1024K 0x0200 +#define DRAMC_PGSZ_2048K 0x0300 +#define DRAMC_EDO 0x0400 /* EDO DRAM */ +#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ +#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ +#define DRAMC_BC_SHIFT 12 +#define DRAMC_RM 0x4000 /* Refresh Mode */ +#define DRAMC_EN 0x8000 /* DRAM Controller enable */ + + +/********** + * + * 0xFFFFFDxx -- In-Circuit Emulation (ICE) + * + **********/ + +/* + * ICE Module Address Compare Register + */ +#define ICEMACR_ADDR 0xfffffd00 +#define ICEMACR LONG_REF(ICEMACR_ADDR) + +/* + * ICE Module Address Mask Register + */ +#define ICEMAMR_ADDR 0xfffffd04 +#define ICEMAMR LONG_REF(ICEMAMR_ADDR) + +/* + * ICE Module Control Compare Register + */ +#define ICEMCCR_ADDR 0xfffffd08 +#define ICEMCCR WORD_REF(ICEMCCR_ADDR) + +#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ +#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ + +/* + * ICE Module Control Mask Register + */ +#define ICEMCMR_ADDR 0xfffffd0a +#define ICEMCMR WORD_REF(ICEMCMR_ADDR) + +#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ +#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ + +/* + * ICE Module Control Register + */ +#define ICEMCR_ADDR 0xfffffd0c +#define ICEMCR WORD_REF(ICEMCR_ADDR) + +#define ICEMCR_CEN 0x0001 /* Compare Enable */ +#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ +#define ICEMCR_SB 0x0004 /* Single Breakpoint */ +#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ +#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ + +/* + * ICE Module Status Register + */ +#define ICEMSR_ADDR 0xfffffd0e +#define ICEMSR WORD_REF(ICEMSR_ADDR) + +#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ +#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ +#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ +#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ + +#endif /* _MC68EZ328_H_ */ diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h new file mode 100644 index 0000000..2b9bf62 --- /dev/null +++ b/arch/m68k/include/asm/MC68VZ328.h @@ -0,0 +1,1349 @@ + +/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers + * + * Copyright (c) 2000-2001 Lineo Inc. + * Copyright (c) 2000-2001 Lineo Canada Corp. + * Copyright (C) 1999 Vladimir Gurevich + * Bare & Hare Software, Inc. + * Based on include/asm-m68knommu/MC68332.h + * Copyright (C) 1998 Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * + * M68VZ328 fixes by Evan Stawnyczy + * vz multiport fixes by Michael Leslie + */ + +#ifndef _MC68VZ328_H_ +#define _MC68VZ328_H_ + +#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) +#define WORD_REF(addr) (*((volatile unsigned short*)addr)) +#define LONG_REF(addr) (*((volatile unsigned long*)addr)) + +#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) +#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) + +/********** + * + * 0xFFFFF0xx -- System Control + * + **********/ + +/* + * System Control Register (SCR) + */ +#define SCR_ADDR 0xfffff000 +#define SCR BYTE_REF(SCR_ADDR) + +#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ +#define SCR_DMAP 0x04 /* Double Map */ +#define SCR_SO 0x08 /* Supervisor Only */ +#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ +#define SCR_PRV 0x20 /* Privilege Violation */ +#define SCR_WPV 0x40 /* Write Protect Violation */ +#define SCR_BETO 0x80 /* Bus-Error TimeOut */ + +/* + * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) + */ +#define MRR_ADDR 0xfffff004 +#define MRR LONG_REF(MRR_ADDR) + +/********** + * + * 0xFFFFF1xx -- Chip-Select logic + * + **********/ + +/* + * Chip Select Group Base Registers + */ +#define CSGBA_ADDR 0xfffff100 +#define CSGBB_ADDR 0xfffff102 + +#define CSGBC_ADDR 0xfffff104 +#define CSGBD_ADDR 0xfffff106 + +#define CSGBA WORD_REF(CSGBA_ADDR) +#define CSGBB WORD_REF(CSGBB_ADDR) +#define CSGBC WORD_REF(CSGBC_ADDR) +#define CSGBD WORD_REF(CSGBD_ADDR) + +/* + * Chip Select Registers + */ +#define CSA_ADDR 0xfffff110 +#define CSB_ADDR 0xfffff112 +#define CSC_ADDR 0xfffff114 +#define CSD_ADDR 0xfffff116 + +#define CSA WORD_REF(CSA_ADDR) +#define CSB WORD_REF(CSB_ADDR) +#define CSC WORD_REF(CSC_ADDR) +#define CSD WORD_REF(CSD_ADDR) + +#define CSA_EN 0x0001 /* Chip-Select Enable */ +#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSA_SIZ_SHIFT 1 +#define CSA_WS_MASK 0x0070 /* Wait State */ +#define CSA_WS_SHIFT 4 +#define CSA_BSW 0x0080 /* Data Bus Width */ +#define CSA_FLASH 0x0100 /* FLASH Memory Support */ +#define CSA_RO 0x8000 /* Read-Only */ + +#define CSB_EN 0x0001 /* Chip-Select Enable */ +#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSB_SIZ_SHIFT 1 +#define CSB_WS_MASK 0x0070 /* Wait State */ +#define CSB_WS_SHIFT 4 +#define CSB_BSW 0x0080 /* Data Bus Width */ +#define CSB_FLASH 0x0100 /* FLASH Memory Support */ +#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSB_UPSIZ_SHIFT 11 +#define CSB_ROP 0x2000 /* Readonly if protected */ +#define CSB_SOP 0x4000 /* Supervisor only if protected */ +#define CSB_RO 0x8000 /* Read-Only */ + +#define CSC_EN 0x0001 /* Chip-Select Enable */ +#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSC_SIZ_SHIFT 1 +#define CSC_WS_MASK 0x0070 /* Wait State */ +#define CSC_WS_SHIFT 4 +#define CSC_BSW 0x0080 /* Data Bus Width */ +#define CSC_FLASH 0x0100 /* FLASH Memory Support */ +#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSC_UPSIZ_SHIFT 11 +#define CSC_ROP 0x2000 /* Readonly if protected */ +#define CSC_SOP 0x4000 /* Supervisor only if protected */ +#define CSC_RO 0x8000 /* Read-Only */ + +#define CSD_EN 0x0001 /* Chip-Select Enable */ +#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ +#define CSD_SIZ_SHIFT 1 +#define CSD_WS_MASK 0x0070 /* Wait State */ +#define CSD_WS_SHIFT 4 +#define CSD_BSW 0x0080 /* Data Bus Width */ +#define CSD_FLASH 0x0100 /* FLASH Memory Support */ +#define CSD_DRAM 0x0200 /* Dram Selection */ +#define CSD_COMB 0x0400 /* Combining */ +#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ +#define CSD_UPSIZ_SHIFT 11 +#define CSD_ROP 0x2000 /* Readonly if protected */ +#define CSD_SOP 0x4000 /* Supervisor only if protected */ +#define CSD_RO 0x8000 /* Read-Only */ + +/* + * Emulation Chip-Select Register + */ +#define EMUCS_ADDR 0xfffff118 +#define EMUCS WORD_REF(EMUCS_ADDR) + +#define EMUCS_WS_MASK 0x0070 +#define EMUCS_WS_SHIFT 4 + +/********** + * + * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control + * + **********/ + +/* + * PLL Control Register + */ +#define PLLCR_ADDR 0xfffff200 +#define PLLCR WORD_REF(PLLCR_ADDR) + +#define PLLCR_DISPLL 0x0008 /* Disable PLL */ +#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ +#define PLLCR_PRESC 0x0020 /* VCO prescaler */ +#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ +#define PLLCR_SYSCLK_SEL_SHIFT 8 +#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ +#define PLLCR_LCDCLK_SEL_SHIFT 11 + +/* '328-compatible definitions */ +#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK +#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT + +/* + * PLL Frequency Select Register + */ +#define PLLFSR_ADDR 0xfffff202 +#define PLLFSR WORD_REF(PLLFSR_ADDR) + +#define PLLFSR_PC_MASK 0x00ff /* P Count */ +#define PLLFSR_PC_SHIFT 0 +#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ +#define PLLFSR_QC_SHIFT 8 +#define PLLFSR_PROT 0x4000 /* Protect P & Q */ +#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ + +/* + * Power Control Register + */ +#define PCTRL_ADDR 0xfffff207 +#define PCTRL BYTE_REF(PCTRL_ADDR) + +#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ +#define PCTRL_WIDTH_SHIFT 0 +#define PCTRL_PCEN 0x80 /* Power Control Enable */ + +/********** + * + * 0xFFFFF3xx -- Interrupt Controller + * + **********/ + +/* + * Interrupt Vector Register + */ +#define IVR_ADDR 0xfffff300 +#define IVR BYTE_REF(IVR_ADDR) + +#define IVR_VECTOR_MASK 0xF8 + +/* + * Interrupt control Register + */ +#define ICR_ADDR 0xfffff302 +#define ICR WORD_REF(ICR_ADDR) + +#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ +#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ +#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ +#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ +#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ +#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ +#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ +#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ +#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ + +/* + * Interrupt Mask Register + */ +#define IMR_ADDR 0xfffff304 +#define IMR LONG_REF(IMR_ADDR) + +/* + * Define the names for bit positions first. This is useful for + * request_irq + */ +#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ +#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ +#define UART1_IRQ_NUM 2 /* UART 1 interrupt */ +#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ +#define RTC_IRQ_NUM 4 /* RTC interrupt */ +#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ +#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ +#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ +#define INT0_IRQ_NUM 8 /* External INT0 */ +#define INT1_IRQ_NUM 9 /* External INT1 */ +#define INT2_IRQ_NUM 10 /* External INT2 */ +#define INT3_IRQ_NUM 11 /* External INT3 */ +#define UART2_IRQ_NUM 12 /* UART 2 interrupt */ +#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ +#define IRQ1_IRQ_NUM 16 /* IRQ1 */ +#define IRQ2_IRQ_NUM 17 /* IRQ2 */ +#define IRQ3_IRQ_NUM 18 /* IRQ3 */ +#define IRQ6_IRQ_NUM 19 /* IRQ6 */ +#define IRQ5_IRQ_NUM 20 /* IRQ5 */ +#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ +#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ +#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ + +#define SPI_IRQ_NUM SPI2_IRQ_NUM + +/* '328-compatible definitions */ +#define SPIM_IRQ_NUM SPI_IRQ_NUM +#define TMR1_IRQ_NUM TMR_IRQ_NUM +#define UART_IRQ_NUM UART1_IRQ_NUM + +/* + * Here go the bitmasks themselves + */ +#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ +#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ +#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ +#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ +#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ +#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ +#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ +#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ +#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ +#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ +#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ +#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ +#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ +#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ +#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ +#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ +#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ +#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IMR_MSPIM IMR_MSPI +#define IMR_MTMR1 IMR_MTMR + +/* + * Interrupt Status Register + */ +#define ISR_ADDR 0xfffff30c +#define ISR LONG_REF(ISR_ADDR) + +#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define ISR_SPIM ISR_SPI +#define ISR_TMR1 ISR_TMR + +/* + * Interrupt Pending Register + */ +#define IPR_ADDR 0xfffff30c +#define IPR LONG_REF(IPR_ADDR) + +#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ +#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ +#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ +#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ +#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ +#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ +#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ +#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ +#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ +#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ +#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ +#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ +#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ +#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ +#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ +#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ +#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ +#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ + +/* '328-compatible definitions */ +#define IPR_SPIM IPR_SPI +#define IPR_TMR1 IPR_TMR + +/********** + * + * 0xFFFFF4xx -- Parallel Ports + * + **********/ + +/* + * Port A + */ +#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ +#define PADATA_ADDR 0xfffff401 /* Port A data register */ +#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ + +#define PADIR BYTE_REF(PADIR_ADDR) +#define PADATA BYTE_REF(PADATA_ADDR) +#define PAPUEN BYTE_REF(PAPUEN_ADDR) + +#define PA(x) (1 << (x)) + +/* + * Port B + */ +#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ +#define PBDATA_ADDR 0xfffff409 /* Port B data register */ +#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ +#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ + +#define PBDIR BYTE_REF(PBDIR_ADDR) +#define PBDATA BYTE_REF(PBDATA_ADDR) +#define PBPUEN BYTE_REF(PBPUEN_ADDR) +#define PBSEL BYTE_REF(PBSEL_ADDR) + +#define PB(x) (1 << (x)) + +#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ +#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ +#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ +#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ +#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ +#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ +#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ +#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ + +/* + * Port C + */ +#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ +#define PCDATA_ADDR 0xfffff411 /* Port C data register */ +#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ +#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ + +#define PCDIR BYTE_REF(PCDIR_ADDR) +#define PCDATA BYTE_REF(PCDATA_ADDR) +#define PCPDEN BYTE_REF(PCPDEN_ADDR) +#define PCSEL BYTE_REF(PCSEL_ADDR) + +#define PC(x) (1 << (x)) + +#define PC_LD0 0x01 /* Use LD0 as PC[0] */ +#define PC_LD1 0x02 /* Use LD1 as PC[1] */ +#define PC_LD2 0x04 /* Use LD2 as PC[2] */ +#define PC_LD3 0x08 /* Use LD3 as PC[3] */ +#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ +#define PC_LLP 0x20 /* Use LLP as PC[5] */ +#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ +#define PC_LACD 0x80 /* Use LACD as PC[7] */ + +/* + * Port D + */ +#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ +#define PDDATA_ADDR 0xfffff419 /* Port D data register */ +#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ +#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ +#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ +#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ +#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ +#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ + +#define PDDIR BYTE_REF(PDDIR_ADDR) +#define PDDATA BYTE_REF(PDDATA_ADDR) +#define PDPUEN BYTE_REF(PDPUEN_ADDR) +#define PDSEL BYTE_REF(PDSEL_ADDR) +#define PDPOL BYTE_REF(PDPOL_ADDR) +#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) +#define PDKBEN BYTE_REF(PDKBEN_ADDR) +#define PDIQEG BYTE_REF(PDIQEG_ADDR) + +#define PD(x) (1 << (x)) + +#define PD_INT0 0x01 /* Use INT0 as PD[0] */ +#define PD_INT1 0x02 /* Use INT1 as PD[1] */ +#define PD_INT2 0x04 /* Use INT2 as PD[2] */ +#define PD_INT3 0x08 /* Use INT3 as PD[3] */ +#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ +#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ +#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ +#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ + +/* + * Port E + */ +#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ +#define PEDATA_ADDR 0xfffff421 /* Port E data register */ +#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ +#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ + +#define PEDIR BYTE_REF(PEDIR_ADDR) +#define PEDATA BYTE_REF(PEDATA_ADDR) +#define PEPUEN BYTE_REF(PEPUEN_ADDR) +#define PESEL BYTE_REF(PESEL_ADDR) + +#define PE(x) (1 << (x)) + +#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ +#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ +#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ +#define PE_DWE 0x08 /* Use DWE as PE[3] */ +#define PE_RXD 0x10 /* Use RXD as PE[4] */ +#define PE_TXD 0x20 /* Use TXD as PE[5] */ +#define PE_RTS 0x40 /* Use RTS as PE[6] */ +#define PE_CTS 0x80 /* Use CTS as PE[7] */ + +/* + * Port F + */ +#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ +#define PFDATA_ADDR 0xfffff429 /* Port F data register */ +#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ +#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ + +#define PFDIR BYTE_REF(PFDIR_ADDR) +#define PFDATA BYTE_REF(PFDATA_ADDR) +#define PFPUEN BYTE_REF(PFPUEN_ADDR) +#define PFSEL BYTE_REF(PFSEL_ADDR) + +#define PF(x) (1 << (x)) + +#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ +#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ +#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ +#define PF_A20 0x08 /* Use A20 as PF[3] */ +#define PF_A21 0x10 /* Use A21 as PF[4] */ +#define PF_A22 0x20 /* Use A22 as PF[5] */ +#define PF_A23 0x40 /* Use A23 as PF[6] */ +#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ + +/* + * Port G + */ +#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ +#define PGDATA_ADDR 0xfffff431 /* Port G data register */ +#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ +#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ + +#define PGDIR BYTE_REF(PGDIR_ADDR) +#define PGDATA BYTE_REF(PGDATA_ADDR) +#define PGPUEN BYTE_REF(PGPUEN_ADDR) +#define PGSEL BYTE_REF(PGSEL_ADDR) + +#define PG(x) (1 << (x)) + +#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ +#define PG_A0 0x02 /* Use A0 as PG[1] */ +#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ +#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ +#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ +#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ + +/* + * Port J + */ +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ +#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJPUEN BYTE_REF(PJPUEN_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +/* + * Port K + */ +#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ +#define PKDATA_ADDR 0xfffff441 /* Port K data register */ +#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ +#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ + +#define PKDIR BYTE_REF(PKDIR_ADDR) +#define PKDATA BYTE_REF(PKDATA_ADDR) +#define PKPUEN BYTE_REF(PKPUEN_ADDR) +#define PKSEL BYTE_REF(PKSEL_ADDR) + +#define PK(x) (1 << (x)) + +#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ +#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ +#define PK_R_W 0x02 /* Use R/W as PK[1] */ +#define PK_LDS 0x04 /* Use /LDS as PK[2] */ +#define PK_UDS 0x08 /* Use /UDS as PK[3] */ +#define PK_LD4 0x10 /* Use LD4 as PK[4] */ +#define PK_LD5 0x20 /* Use LD5 as PK[5] */ +#define PK_LD6 0x40 /* Use LD6 as PK[6] */ +#define PK_LD7 0x80 /* Use LD7 as PK[7] */ + +#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ +#define PJDATA_ADDR 0xfffff439 /* Port J data register */ +#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ +#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ + +#define PJDIR BYTE_REF(PJDIR_ADDR) +#define PJDATA BYTE_REF(PJDATA_ADDR) +#define PJPUEN BYTE_REF(PJPUEN_ADDR) +#define PJSEL BYTE_REF(PJSEL_ADDR) + +#define PJ(x) (1 << (x)) + +#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ +#define PJ_MISO 0x02 /* Use MISO as PJ[1] */ +#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ +#define PJ_SS 0x08 /* Use SS as PJ[3] */ +#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ +#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ +#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ +#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ + +/* + * Port M + */ +#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ +#define PMDATA_ADDR 0xfffff449 /* Port M data register */ +#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ +#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ + +#define PMDIR BYTE_REF(PMDIR_ADDR) +#define PMDATA BYTE_REF(PMDATA_ADDR) +#define PMPUEN BYTE_REF(PMPUEN_ADDR) +#define PMSEL BYTE_REF(PMSEL_ADDR) + +#define PM(x) (1 << (x)) + +#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ +#define PM_SDCE 0x02 /* Use SDCE as PM[1] */ +#define PM_DQMH 0x04 /* Use DQMH as PM[2] */ +#define PM_DQML 0x08 /* Use DQML as PM[3] */ +#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ +#define PM_DMOE 0x20 /* Use DMOE as PM[5] */ + +/********** + * + * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) + * + **********/ + +/* + * PWM Control Register + */ +#define PWMC_ADDR 0xfffff500 +#define PWMC WORD_REF(PWMC_ADDR) + +#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ +#define PWMC_CLKSEL_SHIFT 0 +#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ +#define PWMC_REPEAT_SHIFT 2 +#define PWMC_EN 0x0010 /* Enable PWM */ +#define PMNC_FIFOAV 0x0020 /* FIFO Available */ +#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ +#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ +#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ +#define PWMC_PRESCALER_SHIFT 8 +#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ + +/* '328-compatible definitions */ +#define PWMC_PWMEN PWMC_EN + +/* + * PWM Sample Register + */ +#define PWMS_ADDR 0xfffff502 +#define PWMS WORD_REF(PWMS_ADDR) + +/* + * PWM Period Register + */ +#define PWMP_ADDR 0xfffff504 +#define PWMP BYTE_REF(PWMP_ADDR) + +/* + * PWM Counter Register + */ +#define PWMCNT_ADDR 0xfffff505 +#define PWMCNT BYTE_REF(PWMCNT_ADDR) + +/********** + * + * 0xFFFFF6xx -- General-Purpose Timer + * + **********/ + +/* + * Timer Control register + */ +#define TCTL_ADDR 0xfffff600 +#define TCTL WORD_REF(TCTL_ADDR) + +#define TCTL_TEN 0x0001 /* Timer Enable */ +#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ +#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ +#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ +#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ +#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ +#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ +#define TCTL_IRQEN 0x0010 /* IRQ Enable */ +#define TCTL_OM 0x0020 /* Output Mode */ +#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ +#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ +#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ +#define TCTL_FRR 0x0010 /* Free-Run Mode */ + +/* '328-compatible definitions */ +#define TCTL1_ADDR TCTL_ADDR +#define TCTL1 TCTL + +/* + * Timer Prescaler Register + */ +#define TPRER_ADDR 0xfffff602 +#define TPRER WORD_REF(TPRER_ADDR) + +/* '328-compatible definitions */ +#define TPRER1_ADDR TPRER_ADDR +#define TPRER1 TPRER + +/* + * Timer Compare Register + */ +#define TCMP_ADDR 0xfffff604 +#define TCMP WORD_REF(TCMP_ADDR) + +/* '328-compatible definitions */ +#define TCMP1_ADDR TCMP_ADDR +#define TCMP1 TCMP + +/* + * Timer Capture register + */ +#define TCR_ADDR 0xfffff606 +#define TCR WORD_REF(TCR_ADDR) + +/* '328-compatible definitions */ +#define TCR1_ADDR TCR_ADDR +#define TCR1 TCR + +/* + * Timer Counter Register + */ +#define TCN_ADDR 0xfffff608 +#define TCN WORD_REF(TCN_ADDR) + +/* '328-compatible definitions */ +#define TCN1_ADDR TCN_ADDR +#define TCN1 TCN + +/* + * Timer Status Register + */ +#define TSTAT_ADDR 0xfffff60a +#define TSTAT WORD_REF(TSTAT_ADDR) + +#define TSTAT_COMP 0x0001 /* Compare Event occurred */ +#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ + +/* '328-compatible definitions */ +#define TSTAT1_ADDR TSTAT_ADDR +#define TSTAT1 TSTAT + +/********** + * + * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) + * + **********/ + +/* + * SPIM Data Register + */ +#define SPIMDATA_ADDR 0xfffff800 +#define SPIMDATA WORD_REF(SPIMDATA_ADDR) + +/* + * SPIM Control/Status Register + */ +#define SPIMCONT_ADDR 0xfffff802 +#define SPIMCONT WORD_REF(SPIMCONT_ADDR) + +#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ +#define SPIMCONT_BIT_COUNT_SHIFT 0 +#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ +#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ +#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ +#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ +#define SPIMCONT_XCH 0x0100 /* Exchange */ +#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ +#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ +#define SPIMCONT_DATA_RATE_SHIFT 13 + +/* '328-compatible definitions */ +#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ +#define SPIMCONT_SPIMEN SPIMCONT_ENABLE + +/********** + * + * 0xFFFFF9xx -- UART + * + **********/ + +/* + * UART Status/Control Register + */ + +#define USTCNT_ADDR 0xfffff900 +#define USTCNT WORD_REF(USTCNT_ADDR) + +#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ +#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ +#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ +#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ +#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ +#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ +#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ +#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ +#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ +#define USTCNT_STOP 0x0200 /* Stop bit transmission */ +#define USTCNT_ODD 0x0400 /* Odd Parity */ +#define USTCNT_PEN 0x0800 /* Parity Enable */ +#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ +#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ +#define USTCNT_RXEN 0x4000 /* Receiver Enable */ +#define USTCNT_UEN 0x8000 /* UART Enable */ + +/* '328-compatible definitions */ +#define USTCNT_TXAVAILEN USTCNT_TXAE +#define USTCNT_TXHALFEN USTCNT_TXHE +#define USTCNT_TXEMPTYEN USTCNT_TXEE +#define USTCNT_RXREADYEN USTCNT_RXRE +#define USTCNT_RXHALFEN USTCNT_RXHE +#define USTCNT_RXFULLEN USTCNT_RXFE +#define USTCNT_CTSDELTAEN USTCNT_CTSD +#define USTCNT_ODD_EVEN USTCNT_ODD +#define USTCNT_PARITYEN USTCNT_PEN +#define USTCNT_CLKMODE USTCNT_CLKM +#define USTCNT_UARTEN USTCNT_UEN + +/* + * UART Baud Control Register + */ +#define UBAUD_ADDR 0xfffff902 +#define UBAUD WORD_REF(UBAUD_ADDR) + +#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ +#define UBAUD_PRESCALER_SHIFT 0 +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ +#define UBAUD_DIVIDE_SHIFT 8 +#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ +#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ + +/* + * UART Receiver Register + */ +#define URX_ADDR 0xfffff904 +#define URX WORD_REF(URX_ADDR) + +#define URX_RXDATA_ADDR 0xfffff905 +#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) + +#define URX_RXDATA_MASK 0x00ff /* Received data */ +#define URX_RXDATA_SHIFT 0 +#define URX_PARITY_ERROR 0x0100 /* Parity Error */ +#define URX_BREAK 0x0200 /* Break Detected */ +#define URX_FRAME_ERROR 0x0400 /* Framing Error */ +#define URX_OVRUN 0x0800 /* Serial Overrun */ +#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ +#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ +#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ +#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ + +/* + * UART Transmitter Register + */ +#define UTX_ADDR 0xfffff906 +#define UTX WORD_REF(UTX_ADDR) + +#define UTX_TXDATA_ADDR 0xfffff907 +#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) + +#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ +#define UTX_TXDATA_SHIFT 0 +#define UTX_CTS_DELTA 0x0100 /* CTS changed */ +#define UTX_CTS_STAT 0x0200 /* CTS State */ +#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ +#define UTX_NOCTS 0x0800 /* Ignore CTS */ +#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ +#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ +#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ +#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ + +/* '328-compatible definitions */ +#define UTX_CTS_STATUS UTX_CTS_STAT +#define UTX_IGNORE_CTS UTX_NOCTS + +/* + * UART Miscellaneous Register + */ +#define UMISC_ADDR 0xfffff908 +#define UMISC WORD_REF(UMISC_ADDR) + +#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ +#define UMISC_RX_POL 0x0008 /* Receive Polarity */ +#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ +#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ +#define UMISC_RTS 0x0040 /* Set RTS status */ +#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ +#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ +#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ +#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ +#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ +#define UMISC_CLKSRC 0x4000 /* Clock Source */ +#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ + +/* + * UART Non-integer Prescaler Register + */ +#define NIPR_ADDR 0xfffff90a +#define NIPR WORD_REF(NIPR_ADDR) + +#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ +#define NIPR_STEP_VALUE_SHIFT 0 +#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ +#define NIPR_SELECT_SHIFT 8 +#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ + + +/* generalization of uart control registers to support multiple ports: */ +typedef struct { + volatile unsigned short int ustcnt; + volatile unsigned short int ubaud; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char rxdata; + } b; + } urx; + union { + volatile unsigned short int w; + struct { + volatile unsigned char status; + volatile unsigned char txdata; + } b; + } utx; + volatile unsigned short int umisc; + volatile unsigned short int nipr; + volatile unsigned short int hmark; + volatile unsigned short int unused; +} __attribute__((packed)) m68328_uart; + + + + +/********** + * + * 0xFFFFFAxx -- LCD Controller + * + **********/ + +/* + * LCD Screen Starting Address Register + */ +#define LSSA_ADDR 0xfffffa00 +#define LSSA LONG_REF(LSSA_ADDR) + +#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ + +/* + * LCD Virtual Page Width Register + */ +#define LVPW_ADDR 0xfffffa05 +#define LVPW BYTE_REF(LVPW_ADDR) + +/* + * LCD Screen Width Register (not compatible with '328 !!!) + */ +#define LXMAX_ADDR 0xfffffa08 +#define LXMAX WORD_REF(LXMAX_ADDR) + +#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ + +/* + * LCD Screen Height Register + */ +#define LYMAX_ADDR 0xfffffa0a +#define LYMAX WORD_REF(LYMAX_ADDR) + +#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ + +/* + * LCD Cursor X Position Register + */ +#define LCXP_ADDR 0xfffffa18 +#define LCXP WORD_REF(LCXP_ADDR) + +#define LCXP_CC_MASK 0xc000 /* Cursor Control */ +#define LCXP_CC_TRAMSPARENT 0x0000 +#define LCXP_CC_BLACK 0x4000 +#define LCXP_CC_REVERSED 0x8000 +#define LCXP_CC_WHITE 0xc000 +#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ + +/* + * LCD Cursor Y Position Register + */ +#define LCYP_ADDR 0xfffffa1a +#define LCYP WORD_REF(LCYP_ADDR) + +#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ + +/* + * LCD Cursor Width and Heigth Register + */ +#define LCWCH_ADDR 0xfffffa1c +#define LCWCH WORD_REF(LCWCH_ADDR) + +#define LCWCH_CH_MASK 0x001f /* Cursor Height */ +#define LCWCH_CH_SHIFT 0 +#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ +#define LCWCH_CW_SHIFT 8 + +/* + * LCD Blink Control Register + */ +#define LBLKC_ADDR 0xfffffa1f +#define LBLKC BYTE_REF(LBLKC_ADDR) + +#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ +#define LBLKC_BD_SHIFT 0 +#define LBLKC_BKEN 0x80 /* Blink Enabled */ + +/* + * LCD Panel Interface Configuration Register + */ +#define LPICF_ADDR 0xfffffa20 +#define LPICF BYTE_REF(LPICF_ADDR) + +#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ +#define LPICF_GS_BW 0x00 +#define LPICF_GS_GRAY_4 0x01 +#define LPICF_GS_GRAY_16 0x02 +#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ +#define LPICF_PBSIZ_1 0x00 +#define LPICF_PBSIZ_2 0x04 +#define LPICF_PBSIZ_4 0x08 + +/* + * LCD Polarity Configuration Register + */ +#define LPOLCF_ADDR 0xfffffa21 +#define LPOLCF BYTE_REF(LPOLCF_ADDR) + +#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ +#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ +#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ +#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ + +/* + * LACD (LCD Alternate Crystal Direction) Rate Control Register + */ +#define LACDRC_ADDR 0xfffffa23 +#define LACDRC BYTE_REF(LACDRC_ADDR) + +#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ +#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ +#define LACDRC_ACD_SHIFT 0 + +/* + * LCD Pixel Clock Divider Register + */ +#define LPXCD_ADDR 0xfffffa25 +#define LPXCD BYTE_REF(LPXCD_ADDR) + +#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ +#define LPXCD_PCD_SHIFT 0 + +/* + * LCD Clocking Control Register + */ +#define LCKCON_ADDR 0xfffffa27 +#define LCKCON BYTE_REF(LCKCON_ADDR) + +#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ +#define LCKCON_DWS_SHIFT 0 +#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ +#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ + +/* '328-compatible definitions */ +#define LCKCON_DW_MASK LCKCON_DWS_MASK +#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT + +/* + * LCD Refresh Rate Adjustment Register + */ +#define LRRA_ADDR 0xfffffa29 +#define LRRA BYTE_REF(LRRA_ADDR) + +/* + * LCD Panning Offset Register + */ +#define LPOSR_ADDR 0xfffffa2d +#define LPOSR BYTE_REF(LPOSR_ADDR) + +#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ +#define LPOSR_POS_SHIFT 0 + +/* + * LCD Frame Rate Control Modulation Register + */ +#define LFRCM_ADDR 0xfffffa31 +#define LFRCM BYTE_REF(LFRCM_ADDR) + +#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ +#define LFRCM_YMOD_SHIFT 0 +#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ +#define LFRCM_XMOD_SHIFT 4 + +/* + * LCD Gray Palette Mapping Register + */ +#define LGPMR_ADDR 0xfffffa33 +#define LGPMR BYTE_REF(LGPMR_ADDR) + +#define LGPMR_G1_MASK 0x0f +#define LGPMR_G1_SHIFT 0 +#define LGPMR_G2_MASK 0xf0 +#define LGPMR_G2_SHIFT 4 + +/* + * PWM Contrast Control Register + */ +#define PWMR_ADDR 0xfffffa36 +#define PWMR WORD_REF(PWMR_ADDR) + +#define PWMR_PW_MASK 0x00ff /* Pulse Width */ +#define PWMR_PW_SHIFT 0 +#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ +#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ +#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ +#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ +#define PWMR_SRC_LCD 0x4000 /* LCD clock */ + +/********** + * + * 0xFFFFFBxx -- Real-Time Clock (RTC) + * + **********/ + +/* + * RTC Hours Minutes and Seconds Register + */ +#define RTCTIME_ADDR 0xfffffb00 +#define RTCTIME LONG_REF(RTCTIME_ADDR) + +#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCTIME_SECONDS_SHIFT 0 +#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCTIME_MINUTES_SHIFT 16 +#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCTIME_HOURS_SHIFT 24 + +/* + * RTC Alarm Register + */ +#define RTCALRM_ADDR 0xfffffb04 +#define RTCALRM LONG_REF(RTCALRM_ADDR) + +#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ +#define RTCALRM_SECONDS_SHIFT 0 +#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ +#define RTCALRM_MINUTES_SHIFT 16 +#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ +#define RTCALRM_HOURS_SHIFT 24 + +/* + * Watchdog Timer Register + */ +#define WATCHDOG_ADDR 0xfffffb0a +#define WATCHDOG WORD_REF(WATCHDOG_ADDR) + +#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ +#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ +#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ +#define WATCHDOG_CNT_SHIFT 8 + +/* + * RTC Control Register + */ +#define RTCCTL_ADDR 0xfffffb0c +#define RTCCTL WORD_REF(RTCCTL_ADDR) + +#define RTCCTL_XTL 0x0020 /* Crystal Selection */ +#define RTCCTL_EN 0x0080 /* RTC Enable */ + +/* '328-compatible definitions */ +#define RTCCTL_384 RTCCTL_XTL +#define RTCCTL_ENABLE RTCCTL_EN + +/* + * RTC Interrupt Status Register + */ +#define RTCISR_ADDR 0xfffffb0e +#define RTCISR WORD_REF(RTCISR_ADDR) + +#define RTCISR_SW 0x0001 /* Stopwatch timed out */ +#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ +#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ +#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ +#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ +#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ +#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ +#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ +#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ +#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ +#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ +#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ +#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ +#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ + +/* + * RTC Interrupt Enable Register + */ +#define RTCIENR_ADDR 0xfffffb10 +#define RTCIENR WORD_REF(RTCIENR_ADDR) + +#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ +#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ +#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ +#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ +#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ +#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ +#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ +#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ +#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ +#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ +#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ +#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ +#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ +#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ + +/* + * Stopwatch Minutes Register + */ +#define STPWCH_ADDR 0xfffffb12 +#define STPWCH WORD_REF(STPWCH_ADDR) + +#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ +#define SPTWCH_CNT_SHIFT 0 + +/* + * RTC Day Count Register + */ +#define DAYR_ADDR 0xfffffb1a +#define DAYR WORD_REF(DAYR_ADDR) + +#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ +#define DAYR_DAYS_SHIFT 0 + +/* + * RTC Day Alarm Register + */ +#define DAYALARM_ADDR 0xfffffb1c +#define DAYALARM WORD_REF(DAYALARM_ADDR) + +#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ +#define DAYALARM_DAYSAL_SHIFT 0 + +/********** + * + * 0xFFFFFCxx -- DRAM Controller + * + **********/ + +/* + * DRAM Memory Configuration Register + */ +#define DRAMMC_ADDR 0xfffffc00 +#define DRAMMC WORD_REF(DRAMMC_ADDR) + +#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ +#define DRAMMC_ROW12_PA10 0x0000 +#define DRAMMC_ROW12_PA21 0x4000 +#define DRAMMC_ROW12_PA23 0x8000 +#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ +#define DRAMMC_ROW0_PA11 0x0000 +#define DRAMMC_ROW0_PA22 0x1000 +#define DRAMMC_ROW0_PA23 0x2000 +#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ +#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ +#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ +#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ +#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ +#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ +#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ +#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ +#define DRAMMC_REF_SHIFT 0 + +/* + * DRAM Control Register + */ +#define DRAMC_ADDR 0xfffffc02 +#define DRAMC WORD_REF(DRAMC_ADDR) + +#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ +#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ +#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ +#define DRAMC_SLW 0x0008 /* Slow RAM */ +#define DRAMC_LSP 0x0010 /* Light Sleep */ +#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ +#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ +#define DRAMC_WS_SHIFT 6 +#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ +#define DRAMC_PGSZ_SHIFT 8 +#define DRAMC_PGSZ_256K 0x0000 +#define DRAMC_PGSZ_512K 0x0100 +#define DRAMC_PGSZ_1024K 0x0200 +#define DRAMC_PGSZ_2048K 0x0300 +#define DRAMC_EDO 0x0400 /* EDO DRAM */ +#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ +#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ +#define DRAMC_BC_SHIFT 12 +#define DRAMC_RM 0x4000 /* Refresh Mode */ +#define DRAMC_EN 0x8000 /* DRAM Controller enable */ + + +/********** + * + * 0xFFFFFDxx -- In-Circuit Emulation (ICE) + * + **********/ + +/* + * ICE Module Address Compare Register + */ +#define ICEMACR_ADDR 0xfffffd00 +#define ICEMACR LONG_REF(ICEMACR_ADDR) + +/* + * ICE Module Address Mask Register + */ +#define ICEMAMR_ADDR 0xfffffd04 +#define ICEMAMR LONG_REF(ICEMAMR_ADDR) + +/* + * ICE Module Control Compare Register + */ +#define ICEMCCR_ADDR 0xfffffd08 +#define ICEMCCR WORD_REF(ICEMCCR_ADDR) + +#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ +#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ + +/* + * ICE Module Control Mask Register + */ +#define ICEMCMR_ADDR 0xfffffd0a +#define ICEMCMR WORD_REF(ICEMCMR_ADDR) + +#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ +#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ + +/* + * ICE Module Control Register + */ +#define ICEMCR_ADDR 0xfffffd0c +#define ICEMCR WORD_REF(ICEMCR_ADDR) + +#define ICEMCR_CEN 0x0001 /* Compare Enable */ +#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ +#define ICEMCR_SB 0x0004 /* Single Breakpoint */ +#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ +#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ + +/* + * ICE Module Status Register + */ +#define ICEMSR_ADDR 0xfffffd0e +#define ICEMSR WORD_REF(ICEMSR_ADDR) + +#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ +#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ +#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ +#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ + +#endif /* _MC68VZ328_H_ */ diff --git a/arch/m68k/include/asm/a.out-core.h b/arch/m68k/include/asm/a.out-core.h new file mode 100644 index 0000000..f6bfc1d --- /dev/null +++ b/arch/m68k/include/asm/a.out-core.h @@ -0,0 +1,67 @@ +/* a.out coredump register dumper + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_A_OUT_CORE_H +#define _ASM_A_OUT_CORE_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * fill in the user structure for an a.out core dump + */ +static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) +{ + struct switch_stack *sw; + +/* changed the size calculations - should hopefully work better. lbt */ + dump->magic = CMAGIC; + dump->start_code = 0; + dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); + dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; + dump->u_dsize = ((unsigned long) (current->mm->brk + + (PAGE_SIZE-1))) >> PAGE_SHIFT; + dump->u_dsize -= dump->u_tsize; + dump->u_ssize = 0; + + if (dump->start_stack < TASK_SIZE) + dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; + + dump->u_ar0 = offsetof(struct user, regs); + sw = ((struct switch_stack *)regs) - 1; + dump->regs.d1 = regs->d1; + dump->regs.d2 = regs->d2; + dump->regs.d3 = regs->d3; + dump->regs.d4 = regs->d4; + dump->regs.d5 = regs->d5; + dump->regs.d6 = sw->d6; + dump->regs.d7 = sw->d7; + dump->regs.a0 = regs->a0; + dump->regs.a1 = regs->a1; + dump->regs.a2 = regs->a2; + dump->regs.a3 = sw->a3; + dump->regs.a4 = sw->a4; + dump->regs.a5 = sw->a5; + dump->regs.a6 = sw->a6; + dump->regs.d0 = regs->d0; + dump->regs.orig_d0 = regs->orig_d0; + dump->regs.stkadj = regs->stkadj; + dump->regs.sr = regs->sr; + dump->regs.pc = regs->pc; + dump->regs.fmtvec = (regs->format << 12) | regs->vector; + /* dump floating point stuff */ + dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/m68k/include/asm/a.out.h b/arch/m68k/include/asm/a.out.h new file mode 100644 index 0000000..3885fe4 --- /dev/null +++ b/arch/m68k/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __M68K_A_OUT_H__ +#define __M68K_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __M68K_A_OUT_H__ */ diff --git a/arch/m68k/include/asm/adb_iop.h b/arch/m68k/include/asm/adb_iop.h new file mode 100644 index 0000000..8a48e56 --- /dev/null +++ b/arch/m68k/include/asm/adb_iop.h @@ -0,0 +1,44 @@ +/* + * ADB through the IOP + * Written by Joshua M. Thompson + */ + +/* IOP number and channel number for ADB */ + +#define ADB_IOP IOP_NUM_ISM +#define ADB_CHAN 2 + +/* From the A/UX headers...maybe important, maybe not */ + +#define ADB_IOP_LISTEN 0x01 +#define ADB_IOP_TALK 0x02 +#define ADB_IOP_EXISTS 0x04 +#define ADB_IOP_FLUSH 0x08 +#define ADB_IOP_RESET 0x10 +#define ADB_IOP_INT 0x20 +#define ADB_IOP_POLL 0x40 +#define ADB_IOP_UNINT 0x80 + +#define AIF_RESET 0x00 +#define AIF_FLUSH 0x01 +#define AIF_LISTEN 0x08 +#define AIF_TALK 0x0C + +/* Flag bits in struct adb_iopmsg */ + +#define ADB_IOP_EXPLICIT 0x80 /* nonzero if explicit command */ +#define ADB_IOP_AUTOPOLL 0x40 /* auto/SRQ polling enabled */ +#define ADB_IOP_SRQ 0x04 /* SRQ detected */ +#define ADB_IOP_TIMEOUT 0x02 /* nonzero if timeout */ + +#ifndef __ASSEMBLY__ + +struct adb_iopmsg { + __u8 flags; /* ADB flags */ + __u8 count; /* no. of data bytes */ + __u8 cmd; /* ADB command */ + __u8 data[8]; /* ADB data */ + __u8 spare[21]; /* spare */ +}; + +#endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/amigahw.h b/arch/m68k/include/asm/amigahw.h new file mode 100644 index 0000000..5ca5dd9 --- /dev/null +++ b/arch/m68k/include/asm/amigahw.h @@ -0,0 +1,350 @@ +/* +** asm-m68k/amigahw.h -- This header defines some macros and pointers for +** the various Amiga custom hardware registers. +** The naming conventions used here conform to those +** used in the Amiga Hardware Reference Manual, 3rd Edition +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created: 9/24/92 by Greg Harp +*/ + +#ifndef _M68K_AMIGAHW_H +#define _M68K_AMIGAHW_H + +#include + + /* + * Different Amiga models + */ + +#define AMI_UNKNOWN (0) +#define AMI_500 (1) +#define AMI_500PLUS (2) +#define AMI_600 (3) +#define AMI_1000 (4) +#define AMI_1200 (5) +#define AMI_2000 (6) +#define AMI_2500 (7) +#define AMI_3000 (8) +#define AMI_3000T (9) +#define AMI_3000PLUS (10) +#define AMI_4000 (11) +#define AMI_4000T (12) +#define AMI_CDTV (13) +#define AMI_CD32 (14) +#define AMI_DRACO (15) + + + /* + * Chipsets + */ + +extern unsigned long amiga_chipset; + +#define CS_STONEAGE (0) +#define CS_OCS (1) +#define CS_ECS (2) +#define CS_AGA (3) + + + /* + * Miscellaneous + */ + +extern unsigned long amiga_eclock; /* 700 kHz E Peripheral Clock */ +extern unsigned long amiga_colorclock; /* 3.5 MHz Color Clock */ +extern unsigned long amiga_chip_size; /* Chip RAM Size (bytes) */ +extern unsigned char amiga_vblank; /* VBLANK Frequency */ + + +#define AMIGAHW_DECLARE(name) unsigned name : 1 +#define AMIGAHW_SET(name) (amiga_hw_present.name = 1) +#define AMIGAHW_PRESENT(name) (amiga_hw_present.name) + +struct amiga_hw_present { + /* video hardware */ + AMIGAHW_DECLARE(AMI_VIDEO); /* Amiga Video */ + AMIGAHW_DECLARE(AMI_BLITTER); /* Amiga Blitter */ + AMIGAHW_DECLARE(AMBER_FF); /* Amber Flicker Fixer */ + /* sound hardware */ + AMIGAHW_DECLARE(AMI_AUDIO); /* Amiga Audio */ + /* disk storage interfaces */ + AMIGAHW_DECLARE(AMI_FLOPPY); /* Amiga Floppy */ + AMIGAHW_DECLARE(A3000_SCSI); /* SCSI (wd33c93, A3000 alike) */ + AMIGAHW_DECLARE(A4000_SCSI); /* SCSI (ncr53c710, A4000T alike) */ + AMIGAHW_DECLARE(A1200_IDE); /* IDE (A1200 alike) */ + AMIGAHW_DECLARE(A4000_IDE); /* IDE (A4000 alike) */ + AMIGAHW_DECLARE(CD_ROM); /* CD ROM drive */ + /* other I/O hardware */ + AMIGAHW_DECLARE(AMI_KEYBOARD); /* Amiga Keyboard */ + AMIGAHW_DECLARE(AMI_MOUSE); /* Amiga Mouse */ + AMIGAHW_DECLARE(AMI_SERIAL); /* Amiga Serial */ + AMIGAHW_DECLARE(AMI_PARALLEL); /* Amiga Parallel */ + /* real time clocks */ + AMIGAHW_DECLARE(A2000_CLK); /* Hardware Clock (A2000 alike) */ + AMIGAHW_DECLARE(A3000_CLK); /* Hardware Clock (A3000 alike) */ + /* supporting hardware */ + AMIGAHW_DECLARE(CHIP_RAM); /* Chip RAM */ + AMIGAHW_DECLARE(PAULA); /* Paula (8364) */ + AMIGAHW_DECLARE(DENISE); /* Denise (8362) */ + AMIGAHW_DECLARE(DENISE_HR); /* Denise (8373) */ + AMIGAHW_DECLARE(LISA); /* Lisa (8375) */ + AMIGAHW_DECLARE(AGNUS_PAL); /* Normal/Fat PAL Agnus (8367/8371) */ + AMIGAHW_DECLARE(AGNUS_NTSC); /* Normal/Fat NTSC Agnus (8361/8370) */ + AMIGAHW_DECLARE(AGNUS_HR_PAL); /* Fat Hires PAL Agnus (8372) */ + AMIGAHW_DECLARE(AGNUS_HR_NTSC); /* Fat Hires NTSC Agnus (8372) */ + AMIGAHW_DECLARE(ALICE_PAL); /* PAL Alice (8374) */ + AMIGAHW_DECLARE(ALICE_NTSC); /* NTSC Alice (8374) */ + AMIGAHW_DECLARE(MAGIC_REKICK); /* A3000 Magic Hard Rekick */ + AMIGAHW_DECLARE(PCMCIA); /* PCMCIA Slot */ + AMIGAHW_DECLARE(GG2_ISA); /* GG2 Zorro2ISA Bridge */ + AMIGAHW_DECLARE(ZORRO); /* Zorro AutoConfig */ + AMIGAHW_DECLARE(ZORRO3); /* Zorro III */ +}; + +extern struct amiga_hw_present amiga_hw_present; + +struct CUSTOM { + unsigned short bltddat; + unsigned short dmaconr; + unsigned short vposr; + unsigned short vhposr; + unsigned short dskdatr; + unsigned short joy0dat; + unsigned short joy1dat; + unsigned short clxdat; + unsigned short adkconr; + unsigned short pot0dat; + unsigned short pot1dat; + unsigned short potgor; + unsigned short serdatr; + unsigned short dskbytr; + unsigned short intenar; + unsigned short intreqr; + unsigned char *dskptr; + unsigned short dsklen; + unsigned short dskdat; + unsigned short refptr; + unsigned short vposw; + unsigned short vhposw; + unsigned short copcon; + unsigned short serdat; + unsigned short serper; + unsigned short potgo; + unsigned short joytest; + unsigned short strequ; + unsigned short strvbl; + unsigned short strhor; + unsigned short strlong; + unsigned short bltcon0; + unsigned short bltcon1; + unsigned short bltafwm; + unsigned short bltalwm; + unsigned char *bltcpt; + unsigned char *bltbpt; + unsigned char *bltapt; + unsigned char *bltdpt; + unsigned short bltsize; + unsigned char pad2d; + unsigned char bltcon0l; + unsigned short bltsizv; + unsigned short bltsizh; + unsigned short bltcmod; + unsigned short bltbmod; + unsigned short bltamod; + unsigned short bltdmod; + unsigned short spare2[4]; + unsigned short bltcdat; + unsigned short bltbdat; + unsigned short bltadat; + unsigned short spare3[3]; + unsigned short deniseid; + unsigned short dsksync; + unsigned short *cop1lc; + unsigned short *cop2lc; + unsigned short copjmp1; + unsigned short copjmp2; + unsigned short copins; + unsigned short diwstrt; + unsigned short diwstop; + unsigned short ddfstrt; + unsigned short ddfstop; + unsigned short dmacon; + unsigned short clxcon; + unsigned short intena; + unsigned short intreq; + unsigned short adkcon; + struct { + unsigned short *audlc; + unsigned short audlen; + unsigned short audper; + unsigned short audvol; + unsigned short auddat; + unsigned short audspare[2]; + } aud[4]; + unsigned char *bplpt[8]; + unsigned short bplcon0; + unsigned short bplcon1; + unsigned short bplcon2; + unsigned short bplcon3; + unsigned short bpl1mod; + unsigned short bpl2mod; + unsigned short bplcon4; + unsigned short clxcon2; + unsigned short bpldat[8]; + unsigned char *sprpt[8]; + struct { + unsigned short pos; + unsigned short ctl; + unsigned short dataa; + unsigned short datab; + } spr[8]; + unsigned short color[32]; + unsigned short htotal; + unsigned short hsstop; + unsigned short hbstrt; + unsigned short hbstop; + unsigned short vtotal; + unsigned short vsstop; + unsigned short vbstrt; + unsigned short vbstop; + unsigned short sprhstrt; + unsigned short sprhstop; + unsigned short bplhstrt; + unsigned short bplhstop; + unsigned short hhposw; + unsigned short hhposr; + unsigned short beamcon0; + unsigned short hsstrt; + unsigned short vsstrt; + unsigned short hcenter; + unsigned short diwhigh; + unsigned short spare4[11]; + unsigned short fmode; +}; + +/* + * DMA register bits + */ +#define DMAF_SETCLR (0x8000) +#define DMAF_AUD0 (0x0001) +#define DMAF_AUD1 (0x0002) +#define DMAF_AUD2 (0x0004) +#define DMAF_AUD3 (0x0008) +#define DMAF_DISK (0x0010) +#define DMAF_SPRITE (0x0020) +#define DMAF_BLITTER (0x0040) +#define DMAF_COPPER (0x0080) +#define DMAF_RASTER (0x0100) +#define DMAF_MASTER (0x0200) +#define DMAF_BLITHOG (0x0400) +#define DMAF_BLTNZERO (0x2000) +#define DMAF_BLTDONE (0x4000) +#define DMAF_ALL (0x01FF) + +struct CIA { + unsigned char pra; char pad0[0xff]; + unsigned char prb; char pad1[0xff]; + unsigned char ddra; char pad2[0xff]; + unsigned char ddrb; char pad3[0xff]; + unsigned char talo; char pad4[0xff]; + unsigned char tahi; char pad5[0xff]; + unsigned char tblo; char pad6[0xff]; + unsigned char tbhi; char pad7[0xff]; + unsigned char todlo; char pad8[0xff]; + unsigned char todmid; char pad9[0xff]; + unsigned char todhi; char pada[0x1ff]; + unsigned char sdr; char padb[0xff]; + unsigned char icr; char padc[0xff]; + unsigned char cra; char padd[0xff]; + unsigned char crb; char pade[0xff]; +}; + +#define zTwoBase (0x80000000) +#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase) +#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase) + +#define CUSTOM_PHYSADDR (0xdff000) +#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR))) + +#define CIAA_PHYSADDR (0xbfe001) +#define CIAB_PHYSADDR (0xbfd000) +#define ciaa ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR))) +#define ciab ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR))) + +#define CHIP_PHYSADDR (0x000000) + +void amiga_chip_init (void); +void *amiga_chip_alloc(unsigned long size, const char *name); +void *amiga_chip_alloc_res(unsigned long size, struct resource *res); +void amiga_chip_free(void *ptr); +unsigned long amiga_chip_avail( void ); /*MILAN*/ +extern volatile unsigned short amiga_audio_min_period; + +static inline void amifb_video_off(void) +{ + if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) { + /* program Denise/Lisa for a higher maximum play rate */ + amiga_custom.htotal = 113; /* 31 kHz */ + amiga_custom.vtotal = 223; /* 70 Hz */ + amiga_custom.beamcon0 = 0x4390; /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */ + /* suspend the monitor */ + amiga_custom.hsstrt = amiga_custom.hsstop = 116; + amiga_custom.vsstrt = amiga_custom.vsstop = 226; + amiga_audio_min_period = 57; + } +} + +struct tod3000 { + unsigned int :28, second2:4; /* lower digit */ + unsigned int :28, second1:4; /* upper digit */ + unsigned int :28, minute2:4; /* lower digit */ + unsigned int :28, minute1:4; /* upper digit */ + unsigned int :28, hour2:4; /* lower digit */ + unsigned int :28, hour1:4; /* upper digit */ + unsigned int :28, weekday:4; + unsigned int :28, day2:4; /* lower digit */ + unsigned int :28, day1:4; /* upper digit */ + unsigned int :28, month2:4; /* lower digit */ + unsigned int :28, month1:4; /* upper digit */ + unsigned int :28, year2:4; /* lower digit */ + unsigned int :28, year1:4; /* upper digit */ + unsigned int :28, cntrl1:4; /* control-byte 1 */ + unsigned int :28, cntrl2:4; /* control-byte 2 */ + unsigned int :28, cntrl3:4; /* control-byte 3 */ +}; +#define TOD3000_CNTRL1_HOLD 0 +#define TOD3000_CNTRL1_FREE 9 +#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000))) + +struct tod2000 { + unsigned int :28, second2:4; /* lower digit */ + unsigned int :28, second1:4; /* upper digit */ + unsigned int :28, minute2:4; /* lower digit */ + unsigned int :28, minute1:4; /* upper digit */ + unsigned int :28, hour2:4; /* lower digit */ + unsigned int :28, hour1:4; /* upper digit */ + unsigned int :28, day2:4; /* lower digit */ + unsigned int :28, day1:4; /* upper digit */ + unsigned int :28, month2:4; /* lower digit */ + unsigned int :28, month1:4; /* upper digit */ + unsigned int :28, year2:4; /* lower digit */ + unsigned int :28, year1:4; /* upper digit */ + unsigned int :28, weekday:4; + unsigned int :28, cntrl1:4; /* control-byte 1 */ + unsigned int :28, cntrl2:4; /* control-byte 2 */ + unsigned int :28, cntrl3:4; /* control-byte 3 */ +}; + +#define TOD2000_CNTRL1_HOLD (1<<0) +#define TOD2000_CNTRL1_BUSY (1<<1) +#define TOD2000_CNTRL3_24HMODE (1<<2) +#define TOD2000_HOUR1_PM (1<<2) +#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000))) + +#endif /* _M68K_AMIGAHW_H */ diff --git a/arch/m68k/include/asm/amigaints.h b/arch/m68k/include/asm/amigaints.h new file mode 100644 index 0000000..b1bcdb8 --- /dev/null +++ b/arch/m68k/include/asm/amigaints.h @@ -0,0 +1,113 @@ +/* +** amigaints.h -- Amiga Linux interrupt handling structs and prototypes +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created 10/2/92 by Greg Harp +*/ + +#ifndef _ASMm68k_AMIGAINTS_H_ +#define _ASMm68k_AMIGAINTS_H_ + +#include + +/* +** Amiga Interrupt sources. +** +*/ + +#define AUTO_IRQS (8) +#define AMI_STD_IRQS (14) +#define CIA_IRQS (5) +#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */ + +/* builtin serial port interrupts */ +#define IRQ_AMIGA_TBE (IRQ_USER+0) +#define IRQ_AMIGA_RBF (IRQ_USER+11) + +/* floppy disk interrupts */ +#define IRQ_AMIGA_DSKBLK (IRQ_USER+1) +#define IRQ_AMIGA_DSKSYN (IRQ_USER+12) + +/* software interrupts */ +#define IRQ_AMIGA_SOFT (IRQ_USER+2) + +/* interrupts from external hardware */ +#define IRQ_AMIGA_PORTS IRQ_AUTO_2 +#define IRQ_AMIGA_EXTER IRQ_AUTO_6 + +/* copper interrupt */ +#define IRQ_AMIGA_COPPER (IRQ_USER+4) + +/* vertical blanking interrupt */ +#define IRQ_AMIGA_VERTB (IRQ_USER+5) + +/* Blitter done interrupt */ +#define IRQ_AMIGA_BLIT (IRQ_USER+6) + +/* Audio interrupts */ +#define IRQ_AMIGA_AUD0 (IRQ_USER+7) +#define IRQ_AMIGA_AUD1 (IRQ_USER+8) +#define IRQ_AMIGA_AUD2 (IRQ_USER+9) +#define IRQ_AMIGA_AUD3 (IRQ_USER+10) + +/* CIA interrupt sources */ +#define IRQ_AMIGA_CIAA (IRQ_USER+14) +#define IRQ_AMIGA_CIAA_TA (IRQ_USER+14) +#define IRQ_AMIGA_CIAA_TB (IRQ_USER+15) +#define IRQ_AMIGA_CIAA_ALRM (IRQ_USER+16) +#define IRQ_AMIGA_CIAA_SP (IRQ_USER+17) +#define IRQ_AMIGA_CIAA_FLG (IRQ_USER+18) +#define IRQ_AMIGA_CIAB (IRQ_USER+19) +#define IRQ_AMIGA_CIAB_TA (IRQ_USER+19) +#define IRQ_AMIGA_CIAB_TB (IRQ_USER+20) +#define IRQ_AMIGA_CIAB_ALRM (IRQ_USER+21) +#define IRQ_AMIGA_CIAB_SP (IRQ_USER+22) +#define IRQ_AMIGA_CIAB_FLG (IRQ_USER+23) + + +/* INTREQR masks */ +#define IF_SETCLR 0x8000 /* set/clr bit */ +#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */ +#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */ +#define IF_DSKSYN 0x1000 /* disk sync interrupt */ +#define IF_RBF 0x0800 /* serial receive buffer full interrupt */ +#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */ +#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */ +#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */ +#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */ +#define IF_BLIT 0x0040 /* blitter done interrupt */ +#define IF_VERTB 0x0020 /* vertical blanking interrupt */ +#define IF_COPER 0x0010 /* copper interrupt */ +#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */ +#define IF_SOFT 0x0004 /* software initiated interrupt */ +#define IF_DSKBLK 0x0002 /* diskblock DMA finished */ +#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */ + +/* CIA interrupt control register bits */ + +#define CIA_ICR_TA 0x01 +#define CIA_ICR_TB 0x02 +#define CIA_ICR_ALRM 0x04 +#define CIA_ICR_SP 0x08 +#define CIA_ICR_FLG 0x10 +#define CIA_ICR_ALL 0x1f +#define CIA_ICR_SETCLR 0x80 + +extern void amiga_init_IRQ(void); + +/* to access the interrupt control registers of CIA's use only +** these functions, they behave exactly like the amiga os routines +*/ + +extern struct ciabase ciaa_base, ciab_base; + +extern void cia_init_IRQ(struct ciabase *base); +extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask); +extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask); + +#endif /* asm-m68k/amigaints.h */ diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h new file mode 100644 index 0000000..bb5a6aa --- /dev/null +++ b/arch/m68k/include/asm/amigayle.h @@ -0,0 +1,107 @@ +/* +** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip +** found on the Amiga 1200 +** This information was found by disassembling card.resource, +** so the definitions may not be 100% correct +** anyone has an official doc ? +** +** Copyright 1997 by Alain Malek +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created: 11/28/97 by Alain Malek +*/ + +#ifndef _M68K_AMIGAYLE_H_ +#define _M68K_AMIGAYLE_H_ + +#include +#include + +/* memory layout */ + +#define GAYLE_RAM (0x600000+zTwoBase) +#define GAYLE_RAMSIZE (0x400000) +#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase) +#define GAYLE_ATTRIBUTESIZE (0x020000) +#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */ +#define GAYLE_IOSIZE (0x010000) +#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */ + +/* offset for accessing odd IO registers */ +#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1) + +/* GAYLE registers */ + +struct GAYLE { + u_char cardstatus; + u_char pad0[0x1000-1]; + + u_char intreq; + u_char pad1[0x1000-1]; + + u_char inten; + u_char pad2[0x1000-1]; + + u_char config; + u_char pad3[0x1000-1]; +}; + +#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */ + +#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset, + read 1 byte to stop reset */ + +#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS)) +#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET)) + +#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE)) + +#if 0 +#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) +#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) + +#define gayle_inw(a) readw( GAYLE_IO+(a) ) +#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) ) +#endif + +/* GAYLE_CARDSTATUS bit def */ + +#define GAYLE_CS_CCDET 0x40 /* credit card detect */ +#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */ +#define GAYLE_CS_SC 0x20 /* credit card status change */ +#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */ +#define GAYLE_CS_DA 0x10 /* digital audio */ +#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */ +#define GAYLE_CS_BSY 0x04 /* credit card busy */ +#define GAYLE_CS_IRQ 0x04 /* interrupt request */ + +/* GAYLE_IRQ bit def */ + +#define GAYLE_IRQ_IDE 0x80 +#define GAYLE_IRQ_CCDET 0x40 +#define GAYLE_IRQ_BVD1 0x20 +#define GAYLE_IRQ_SC 0x20 +#define GAYLE_IRQ_BVD2 0x10 +#define GAYLE_IRQ_DA 0x10 +#define GAYLE_IRQ_WR 0x08 +#define GAYLE_IRQ_BSY 0x04 +#define GAYLE_IRQ_IRQ 0x04 +#define GAYLE_IRQ_IDEACK1 0x02 +#define GAYLE_IRQ_IDEACK0 0x01 + +/* GAYLE_CONFIG bit def + (bit 0-1 for program voltage, bit 2-3 for access speed */ + +#define GAYLE_CFG_0V 0x00 +#define GAYLE_CFG_5V 0x01 +#define GAYLE_CFG_12V 0x02 + +#define GAYLE_CFG_100NS 0x08 +#define GAYLE_CFG_150NS 0x04 +#define GAYLE_CFG_250NS 0x00 +#define GAYLE_CFG_720NS 0x0c + +#endif /* asm-m68k/amigayle.h */ diff --git a/arch/m68k/include/asm/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h new file mode 100644 index 0000000..6f1ec18 --- /dev/null +++ b/arch/m68k/include/asm/amipcmcia.h @@ -0,0 +1,110 @@ +/* +** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions +** +** Copyright 1997 by Alain Malek +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created: 12/10/97 by Alain Malek +*/ + +#ifndef __AMIGA_PCMCIA_H__ +#define __AMIGA_PCMCIA_H__ + +#include + +/* prototypes */ + +void pcmcia_reset(void); +int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len); +void pcmcia_program_voltage(int voltage); +void pcmcia_access_speed(int speed); +void pcmcia_write_enable(void); +void pcmcia_write_disable(void); + +static inline u_char pcmcia_read_status(void) +{ + return (gayle.cardstatus & 0x7c); +} + +static inline u_char pcmcia_get_intreq(void) +{ + return (gayle.intreq); +} + +static inline void pcmcia_ack_int(u_char intreq) +{ + gayle.intreq = 0xf8; +} + +static inline void pcmcia_enable_irq(void) +{ + gayle.inten |= GAYLE_IRQ_IRQ; +} + +static inline void pcmcia_disable_irq(void) +{ + gayle.inten &= ~GAYLE_IRQ_IRQ; +} + +#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET) + +/* valid voltages for pcmcia_ProgramVoltage */ + +#define PCMCIA_0V 0 +#define PCMCIA_5V 5 +#define PCMCIA_12V 12 + +/* valid speeds for pcmcia_AccessSpeed */ + +#define PCMCIA_SPEED_100NS 100 +#define PCMCIA_SPEED_150NS 150 +#define PCMCIA_SPEED_250NS 250 +#define PCMCIA_SPEED_720NS 720 + +/* PCMCIA Tuple codes */ + +#define CISTPL_NULL 0x00 +#define CISTPL_DEVICE 0x01 +#define CISTPL_LONGLINK_CB 0x02 +#define CISTPL_CONFIG_CB 0x04 +#define CISTPL_CFTABLE_ENTRY_CB 0x05 +#define CISTPL_LONGLINK_MFC 0x06 +#define CISTPL_BAR 0x07 +#define CISTPL_CHECKSUM 0x10 +#define CISTPL_LONGLINK_A 0x11 +#define CISTPL_LONGLINK_C 0x12 +#define CISTPL_LINKTARGET 0x13 +#define CISTPL_NO_LINK 0x14 +#define CISTPL_VERS_1 0x15 +#define CISTPL_ALTSTR 0x16 +#define CISTPL_DEVICE_A 0x17 +#define CISTPL_JEDEC_C 0x18 +#define CISTPL_JEDEC_A 0x19 +#define CISTPL_CONFIG 0x1a +#define CISTPL_CFTABLE_ENTRY 0x1b +#define CISTPL_DEVICE_OC 0x1c +#define CISTPL_DEVICE_OA 0x1d +#define CISTPL_DEVICE_GEO 0x1e +#define CISTPL_DEVICE_GEO_A 0x1f +#define CISTPL_MANFID 0x20 +#define CISTPL_FUNCID 0x21 +#define CISTPL_FUNCE 0x22 +#define CISTPL_SWIL 0x23 +#define CISTPL_END 0xff + +/* FUNCID */ + +#define CISTPL_FUNCID_MULTI 0x00 +#define CISTPL_FUNCID_MEMORY 0x01 +#define CISTPL_FUNCID_SERIAL 0x02 +#define CISTPL_FUNCID_PARALLEL 0x03 +#define CISTPL_FUNCID_FIXED 0x04 +#define CISTPL_FUNCID_VIDEO 0x05 +#define CISTPL_FUNCID_NETWORK 0x06 +#define CISTPL_FUNCID_AIMS 0x07 +#define CISTPL_FUNCID_SCSI 0x08 + +#endif diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h new file mode 100644 index 0000000..871c0d5 --- /dev/null +++ b/arch/m68k/include/asm/anchor.h @@ -0,0 +1,112 @@ +/****************************************************************************/ + +/* + * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. + * + * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) + */ + +/****************************************************************************/ +#ifndef anchor_h +#define anchor_h +/****************************************************************************/ + +/* + * Define basic addressing info. + */ +#if defined(CONFIG_M5407C3) +#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#else +#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ +#define COMEM_IRQ 25 /* IRQ of anchor part */ +#endif + +/****************************************************************************/ + +/* + * 4-byte registers of CO-MEM, so adjust register addresses for + * easy access. Handy macro for word access too. + */ +#define LREG(a) ((a) >> 2) +#define WREG(a) ((a) >> 1) + + +/* + * Define base addresses within CO-MEM Lite register address space. + */ +#define COMEM_I2O 0x0000 /* I2O registers */ +#define COMEM_OPREGS 0x0400 /* Operation registers */ +#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ +#define COMEM_SHMEM 0x4000 /* Shared memory region */ + +#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ + + +/* + * Define CO-MEM Registers. + */ +#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ +#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ +#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ +#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ +#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ +#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ +#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ +#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ + +#define COMEM_DAHBASE 0x0460 /* Direct access base address */ + +#define COMEM_NVCMD 0x04a0 /* I2C serial command */ +#define COMEM_NVREAD 0x04a4 /* I2C serial read */ +#define COMEM_NVSTAT 0x04a8 /* I2C status */ + +#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ +#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ +#define COMEM_DMASIZE 0x04b8 /* DMA size */ +#define COMEM_DMACTL 0x04bc /* DMA control */ + +#define COMEM_HCTL 0x04e0 /* Host control */ +#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ +#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ +#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ +#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ + +#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ + + +/* + * Commands and flags for use with Direct Access Register. + */ +#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ +#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ +#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ +#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ +#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ +#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ +#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ +#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ + +#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) + +#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) + + +/* + * The PCI bus will be limited in what slots will actually be used. + * Define valid device numbers for different boards. + */ +#if defined(CONFIG_M5407C3) +#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ +#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ +#else +#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ +#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ +#endif + +#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ + + +/****************************************************************************/ +#endif /* anchor_h */ diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h new file mode 100644 index 0000000..954adc8 --- /dev/null +++ b/arch/m68k/include/asm/apollodma.h @@ -0,0 +1,248 @@ +/* + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + */ + +#ifndef _ASM_APOLLO_DMA_H +#define _ASM_APOLLO_DMA_H + +#include /* need byte IO */ +#include /* And spinlocks */ +#include + + +#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) +#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * DMA transfers are limited to the lower 16MB of _physical_ memory. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +#define MAX_DMA_CHANNELS 8 + +/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ +#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ +#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ +#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ +#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ +#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ +#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ +#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ + +#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ +#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ +#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ +#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ +#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ +#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ +#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ +#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ + +#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ +#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) +#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) +#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) +#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) +#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) +#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) +#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) + +#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ +#define DMA_CNT_1 (IO_DMA1_BASE+0x03) +#define DMA_CNT_2 (IO_DMA1_BASE+0x05) +#define DMA_CNT_3 (IO_DMA1_BASE+0x07) +#define DMA_CNT_4 (IO_DMA2_BASE+0x02) +#define DMA_CNT_5 (IO_DMA2_BASE+0x06) +#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) +#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) + +#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ +#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +#define DMA_8BIT 0 +#define DMA_16BIT 1 +#define DMA_BUSMASTER 2 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr, DMA1_MASK_REG); + else + dma_outb(dmanr & 3, DMA2_MASK_REG); +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr<=3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr&3), DMA2_MODE_REG); +} + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + if (dmanr <= 3) { + dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { + dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + } +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + } else { + dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE + : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr<=3)? count : (count<<1); +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +/* These are in arch/m68k/apollo/dma.c: */ +extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); +extern void dma_unmap_page(unsigned short dma_addr); + +#endif /* _ASM_APOLLO_DMA_H */ diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h new file mode 100644 index 0000000..a1373b9 --- /dev/null +++ b/arch/m68k/include/asm/apollohw.h @@ -0,0 +1,108 @@ +/* apollohw.h : some structures to access apollo HW */ + +#ifndef _ASMm68k_APOLLOHW_H_ +#define _ASMm68k_APOLLOHW_H_ + +#include + +/* + apollo models +*/ + +extern u_long apollo_model; + +#define APOLLO_UNKNOWN (0) +#define APOLLO_DN3000 (1) +#define APOLLO_DN3010 (2) +#define APOLLO_DN3500 (3) +#define APOLLO_DN4000 (4) +#define APOLLO_DN4500 (5) + +/* + see scn2681 data sheet for more info. + member names are read_write. +*/ + +#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x + +struct SCN2681 { + + DECLARE_2681_FIELD(mra); + DECLARE_2681_FIELD(sra_csra); + DECLARE_2681_FIELD(BRGtest_cra); + DECLARE_2681_FIELD(rhra_thra); + DECLARE_2681_FIELD(ipcr_acr); + DECLARE_2681_FIELD(isr_imr); + DECLARE_2681_FIELD(ctu_ctur); + DECLARE_2681_FIELD(ctl_ctlr); + DECLARE_2681_FIELD(mrb); + DECLARE_2681_FIELD(srb_csrb); + DECLARE_2681_FIELD(tst_crb); + DECLARE_2681_FIELD(rhrb_thrb); + DECLARE_2681_FIELD(reserved); + DECLARE_2681_FIELD(ip_opcr); + DECLARE_2681_FIELD(startCnt_setOutBit); + DECLARE_2681_FIELD(stopCnt_resetOutBit); + +}; + +#if 0 +struct mc146818 { + + unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4, + minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4; + unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4, + day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4; + unsigned int month1:4, month2:4, year1:4, year2:4, :16; + +}; +#endif + +struct mc146818 { + unsigned char second, alarm_second; + unsigned char minute, alarm_minute; + unsigned char hours, alarm_hours; + unsigned char day_of_week, day_of_month; + unsigned char month, year; +}; + + +#define IO_BASE 0x80000000 + +extern u_long sio01_physaddr; +extern u_long sio23_physaddr; +extern u_long rtc_physaddr; +extern u_long pica_physaddr; +extern u_long picb_physaddr; +extern u_long cpuctrl_physaddr; +extern u_long timer_physaddr; + +#define SAU7_SIO01_PHYSADDR 0x10400 +#define SAU7_SIO23_PHYSADDR 0x10500 +#define SAU7_RTC_PHYSADDR 0x10900 +#define SAU7_PICA 0x11000 +#define SAU7_PICB 0x11100 +#define SAU7_CPUCTRL 0x10100 +#define SAU7_TIMER 0x010800 + +#define SAU8_SIO01_PHYSADDR 0x8400 +#define SAU8_RTC_PHYSADDR 0x8900 +#define SAU8_PICA 0x9400 +#define SAU8_PICB 0x9500 +#define SAU8_CPUCTRL 0x8100 +#define SAU8_TIMER 0x8800 + +#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr))) +#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr))) +#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr))) +#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) +#define pica (IO_BASE + pica_physaddr) +#define picb (IO_BASE + picb_physaddr) +#define timer (IO_BASE + timer_physaddr) +#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) + +#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) + +#define IRQ_APOLLO IRQ_USER + +#endif diff --git a/arch/m68k/include/asm/atafd.h b/arch/m68k/include/asm/atafd.h new file mode 100644 index 0000000..8456889 --- /dev/null +++ b/arch/m68k/include/asm/atafd.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M68K_FD_H +#define _ASM_M68K_FD_H + +/* Definitions for the Atari Floppy driver */ + +struct atari_format_descr { + int track; /* to be formatted */ + int head; /* "" "" */ + int sect_offset; /* offset of first sector */ +}; + +#endif diff --git a/arch/m68k/include/asm/atafdreg.h b/arch/m68k/include/asm/atafdreg.h new file mode 100644 index 0000000..bbf8094 --- /dev/null +++ b/arch/m68k/include/asm/atafdreg.h @@ -0,0 +1,79 @@ +#ifndef _LINUX_FDREG_H +#define _LINUX_FDREG_H + +/* +** WD1772 stuff + */ + +/* register codes */ + +#define FDCSELREG_STP (0x80) /* command/status register */ +#define FDCSELREG_TRA (0x82) /* track register */ +#define FDCSELREG_SEC (0x84) /* sector register */ +#define FDCSELREG_DTA (0x86) /* data register */ + +/* register names for FDC_READ/WRITE macros */ + +#define FDCREG_CMD 0 +#define FDCREG_STATUS 0 +#define FDCREG_TRACK 2 +#define FDCREG_SECTOR 4 +#define FDCREG_DATA 6 + +/* command opcodes */ + +#define FDCCMD_RESTORE (0x00) /* - */ +#define FDCCMD_SEEK (0x10) /* | */ +#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */ +#define FDCCMD_STIN (0x40) /* | */ +#define FDCCMD_STOT (0x60) /* - */ +#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */ +#define FDCCMD_WRSEC (0xa0) /* - " */ +#define FDCCMD_RDADR (0xc0) /* - */ +#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */ +#define FDCCMD_WRTRA (0xf0) /* - */ +#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */ + +/* command modifier bits */ + +#define FDCCMDADD_SR6 (0x00) /* step rate settings */ +#define FDCCMDADD_SR12 (0x01) +#define FDCCMDADD_SR2 (0x02) +#define FDCCMDADD_SR3 (0x03) +#define FDCCMDADD_V (0x04) /* verify */ +#define FDCCMDADD_H (0x08) /* wait for spin-up */ +#define FDCCMDADD_U (0x10) /* update track register */ +#define FDCCMDADD_M (0x10) /* multiple sector access */ +#define FDCCMDADD_E (0x04) /* head settling flag */ +#define FDCCMDADD_P (0x02) /* precompensation off */ +#define FDCCMDADD_A0 (0x01) /* DAM flag */ + +/* status register bits */ + +#define FDCSTAT_MOTORON (0x80) /* motor on */ +#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */ +#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */ +#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */ +#define FDCSTAT_RECNF (0x10) /* record not found */ +#define FDCSTAT_CRC (0x08) /* CRC error */ +#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */ +#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */ +#define FDCSTAT_IDX (0x02) /* Index status (Type I) */ +#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */ +#define FDCSTAT_BUSY (0x01) /* FDC is busy */ + + +/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */ +#define DSKSIDE (0x01) + +#define DSKDRVNONE (0x06) +#define DSKDRV0 (0x02) +#define DSKDRV1 (0x04) + +/* step rates */ +#define FDCSTEP_6 0x00 +#define FDCSTEP_12 0x01 +#define FDCSTEP_2 0x02 +#define FDCSTEP_3 0x03 + +#endif diff --git a/arch/m68k/include/asm/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h new file mode 100644 index 0000000..93be7da --- /dev/null +++ b/arch/m68k/include/asm/atari_joystick.h @@ -0,0 +1,22 @@ +#ifndef _LINUX_ATARI_JOYSTICK_H +#define _LINUX_ATARI_JOYSTICK_H + +/* + * linux/include/linux/atari_joystick.h + * header file for Atari Joystick driver + * by Robert de Vries (robert@and.nl) on 19Jul93 + */ + +void atari_joystick_interrupt(char*); +int atari_joystick_init(void); +extern int atari_mouse_buttons; + +struct joystick_status { + char fire; + char dir; + int ready; + int active; + wait_queue_head_t wait; +}; + +#endif diff --git a/arch/m68k/include/asm/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h new file mode 100644 index 0000000..8e389b7 --- /dev/null +++ b/arch/m68k/include/asm/atari_stdma.h @@ -0,0 +1,22 @@ + +#ifndef _atari_stdma_h +#define _atari_stdma_h + + +#include + + +/***************************** Prototypes *****************************/ + +void stdma_lock(irq_handler_t handler, void *data); +void stdma_release( void ); +int stdma_others_waiting( void ); +int stdma_islocked( void ); +void *stdma_locked_by( void ); +void stdma_init( void ); + +/************************* End of Prototypes **************************/ + + + +#endif /* _atari_stdma_h */ diff --git a/arch/m68k/include/asm/atari_stram.h b/arch/m68k/include/asm/atari_stram.h new file mode 100644 index 0000000..7546d13 --- /dev/null +++ b/arch/m68k/include/asm/atari_stram.h @@ -0,0 +1,17 @@ +#ifndef _M68K_ATARI_STRAM_H +#define _M68K_ATARI_STRAM_H + +/* + * Functions for Atari ST-RAM management + */ + +/* public interface */ +void *atari_stram_alloc(long size, const char *owner); +void atari_stram_free(void *); + +/* functions called internally by other parts of the kernel */ +void atari_stram_init(void); +void atari_stram_reserve_pages(void *start_mem); +void atari_stram_mem_init_hook (void); + +#endif /*_M68K_ATARI_STRAM_H */ diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h new file mode 100644 index 0000000..1412b4a --- /dev/null +++ b/arch/m68k/include/asm/atarihw.h @@ -0,0 +1,807 @@ +/* +** linux/atarihw.h -- This header defines some macros and pointers for +** the various Atari custom hardware registers. +** +** Copyright 1994 by Björn Brauel +** +** 5/1/94 Roman Hodek: +** Added definitions for TT specific chips. +** +** 1996-09-13 lars brinkhoff : +** Finally added definitions for the matrix/codec and the DSP56001 host +** interface. +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +*/ + +#ifndef _LINUX_ATARIHW_H_ +#define _LINUX_ATARIHW_H_ + +#include +#include +#include + +extern u_long atari_mch_cookie; +extern u_long atari_mch_type; +extern u_long atari_switches; +extern int atari_rtc_year_offset; +extern int atari_dont_touch_floppy_select; + +/* convenience macros for testing machine type */ +#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST) +#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ + (atari_mch_cookie & 0xffff) == 0) +#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ + (atari_mch_cookie & 0xffff) == 0x10) +#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT) +#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON) +#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA) +#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40) + +/* values for atari_switches */ +#define ATARI_SWITCH_IKBD 0x01 +#define ATARI_SWITCH_MIDI 0x02 +#define ATARI_SWITCH_SND6 0x04 +#define ATARI_SWITCH_SND7 0x08 +#define ATARI_SWITCH_OVSC_SHIFT 16 +#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT) +#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT) +#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT) +#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT) +#define ATARI_SWITCH_OVSC_MASK 0xffff0000 + +/* + * Define several Hardware-Chips for indication so that for the ATARI we do + * no longer decide whether it is a Falcon or other machine . It's just + * important what hardware the machine uses + */ + +/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */ + +#define ATARIHW_DECLARE(name) unsigned name : 1 +#define ATARIHW_SET(name) (atari_hw_present.name = 1) +#define ATARIHW_PRESENT(name) (atari_hw_present.name) + +struct atari_hw_present { + /* video hardware */ + ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */ + ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */ + ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */ + ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */ + /* sound hardware */ + ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */ + ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */ + ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */ + /* disk storage interfaces */ + ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */ + ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */ + ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */ + ATARIHW_DECLARE(IDE); /* IDE Interface */ + ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */ + /* other I/O hardware */ + ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari + without it... but who knows?) */ + ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */ + ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */ + ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */ + ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe + and Falcon */ + ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */ + /* DMA */ + ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */ + ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */ + ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */ + ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */ + /* real time clocks */ + ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */ + ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */ + /* supporting hardware */ + ATARIHW_DECLARE(SCU); /* System Control Unit */ + ATARIHW_DECLARE(BLITTER); /* Blitter */ + ATARIHW_DECLARE(VME); /* VME Bus */ + ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */ +}; + +extern struct atari_hw_present atari_hw_present; + + +/* Reading the MFP port register gives a machine independent delay, since the + * MFP always has a 8 MHz clock. This avoids problems with the varying length + * of nops on various machines. Somebody claimed that the tstb takes 600 ns. + */ +#define MFPDELAY() \ + __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" ); + +/* Do cache push/invalidate for DMA read/write. This function obeys the + * snooping on some machines (Medusa) and processors: The Medusa itself can + * snoop, but only the '040 can source data from its cache to DMA writes i.e., + * reads from memory). Both '040 and '060 invalidate cache entries on snooped + * DMA reads (i.e., writes to memory). + */ + + +#define atari_readb raw_inb +#define atari_writeb raw_outb + +#define atari_inb_p raw_inb +#define atari_outb_p raw_outb + + + +#include +#include + +static inline void dma_cache_maintenance( unsigned long paddr, + unsigned long len, + int writeflag ) + +{ + if (writeflag) { + if (!MACH_IS_MEDUSA || CPU_IS_060) + cache_push( paddr, len ); + } + else { + if (!MACH_IS_MEDUSA) + cache_clear( paddr, len ); + } +} + + +/* +** Shifter + */ +#define ST_LOW 0 +#define ST_MID 1 +#define ST_HIGH 2 +#define TT_LOW 7 +#define TT_MID 4 +#define TT_HIGH 6 + +#define SHF_BAS (0xffff8200) +struct SHIFTER + { + u_char pad1; + u_char bas_hi; + u_char pad2; + u_char bas_md; + u_char pad3; + u_char volatile vcounthi; + u_char pad4; + u_char volatile vcountmid; + u_char pad5; + u_char volatile vcountlow; + u_char volatile syncmode; + u_char pad6; + u_char pad7; + u_char bas_lo; + }; +# define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) + +#define SHF_FBAS (0xffff820e) +struct SHIFTER_F030 + { + u_short off_next; + u_short scn_width; + }; +# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS)) + + +#define SHF_TBAS (0xffff8200) +struct SHIFTER_TT { + u_char char_dummy0; + u_char bas_hi; /* video mem base addr, high and mid byte */ + u_char char_dummy1; + u_char bas_md; + u_char char_dummy2; + u_char vcount_hi; /* pointer to currently displayed byte */ + u_char char_dummy3; + u_char vcount_md; + u_char char_dummy4; + u_char vcount_lo; + u_short st_sync; /* ST compatible sync mode register, unused */ + u_char char_dummy5; + u_char bas_lo; /* video mem addr, low byte */ + u_char char_dummy6[2+3*16]; + /* $ffff8240: */ + u_short color_reg[16]; /* 16 color registers */ + u_char st_shiftmode; /* ST compatible shift mode register, unused */ + u_char char_dummy7; + u_short tt_shiftmode; /* TT shift mode register */ + + +}; +#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS)) + +/* values for shifter_tt->tt_shiftmode */ +#define TT_SHIFTER_STLOW 0x0000 +#define TT_SHIFTER_STMID 0x0100 +#define TT_SHIFTER_STHIGH 0x0200 +#define TT_SHIFTER_TTLOW 0x0700 +#define TT_SHIFTER_TTMID 0x0400 +#define TT_SHIFTER_TTHIGH 0x0600 +#define TT_SHIFTER_MODEMASK 0x0700 +#define TT_SHIFTER_NUMMODE 0x0008 +#define TT_SHIFTER_PALETTE_MASK 0x000f +#define TT_SHIFTER_GRAYMODE 0x1000 + +/* 256 TT palette registers */ +#define TT_PALETTE_BASE (0xffff8400) +#define tt_palette ((volatile u_short *)TT_PALETTE_BASE) + +#define TT_PALETTE_RED_MASK 0x0f00 +#define TT_PALETTE_GREEN_MASK 0x00f0 +#define TT_PALETTE_BLUE_MASK 0x000f + +/* +** Falcon030 VIDEL Video Controller +** for description see File 'linux\tools\atari\hardware.txt + */ +#define f030_col ((u_long *) 0xffff9800) +#define f030_xreg ((u_short*) 0xffff8282) +#define f030_yreg ((u_short*) 0xffff82a2) +#define f030_creg ((u_short*) 0xffff82c0) +#define f030_sreg ((u_short*) 0xffff8260) +#define f030_mreg ((u_short*) 0xffff820a) +#define f030_linewidth ((u_short*) 0xffff820e) +#define f030_hscroll ((u_char*) 0xffff8265) + +#define VIDEL_BAS (0xffff8260) +struct VIDEL { + u_short st_shift; + u_short pad1; + u_char xoffset_s; + u_char xoffset; + u_short f_shift; + u_char pad2[0x1a]; + u_short hht; + u_short hbb; + u_short hbe; + u_short hdb; + u_short hde; + u_short hss; + u_char pad3[0x14]; + u_short vft; + u_short vbb; + u_short vbe; + u_short vdb; + u_short vde; + u_short vss; + u_char pad4[0x12]; + u_short control; + u_short mode; +}; +#define videl ((*(volatile struct VIDEL *)VIDEL_BAS)) + +/* +** DMA/WD1772 Disk Controller + */ + +#define FWD_BAS (0xffff8604) +struct DMA_WD + { + u_short fdc_acces_seccount; + u_short dma_mode_status; + u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */ + u_char dma_hi; + u_char char_dummy2; + u_char dma_md; + u_char char_dummy3; + u_char dma_lo; + u_short fdc_speed; + }; +# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS)) +/* alias */ +#define st_dma dma_wd +/* The two highest bytes of an extended DMA as a short; this is a must + * for the Medusa. + */ +#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608)) + +/* +** YM2149 Sound Chip +** access in bytes + */ + +#define YM_BAS (0xffff8800) +struct SOUND_YM + { + u_char rd_data_reg_sel; + u_char char_dummy1; + u_char wd_data; + }; +#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS)) + +/* TT SCSI DMA */ + +#define TT_SCSI_DMA_BAS (0xffff8700) +struct TT_DMA { + u_char char_dummy0; + u_char dma_addr_hi; + u_char char_dummy1; + u_char dma_addr_hmd; + u_char char_dummy2; + u_char dma_addr_lmd; + u_char char_dummy3; + u_char dma_addr_lo; + u_char char_dummy4; + u_char dma_cnt_hi; + u_char char_dummy5; + u_char dma_cnt_hmd; + u_char char_dummy6; + u_char dma_cnt_lmd; + u_char char_dummy7; + u_char dma_cnt_lo; + u_long dma_restdata; + u_short dma_ctrl; +}; +#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS)) + +/* TT SCSI Controller 5380 */ + +#define TT_5380_BAS (0xffff8781) +struct TT_5380 { + u_char scsi_data; + u_char char_dummy1; + u_char scsi_icr; + u_char char_dummy2; + u_char scsi_mode; + u_char char_dummy3; + u_char scsi_tcr; + u_char char_dummy4; + u_char scsi_idstat; + u_char char_dummy5; + u_char scsi_dmastat; + u_char char_dummy6; + u_char scsi_targrcv; + u_char char_dummy7; + u_char scsi_inircv; +}; +#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS)) +#define tt_scsi_regp ((volatile char *)TT_5380_BAS) + + +/* +** Falcon DMA Sound Subsystem + */ + +#define MATRIX_BASE (0xffff8930) +struct MATRIX +{ + u_short source; + u_short destination; + u_char external_frequency_divider; + u_char internal_frequency_divider; +}; +#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE) + +#define CODEC_BASE (0xffff8936) +struct CODEC +{ + u_char tracks; + u_char input_source; +#define CODEC_SOURCE_ADC 1 +#define CODEC_SOURCE_MATRIX 2 + u_char adc_source; +#define ADC_SOURCE_RIGHT_PSG 1 +#define ADC_SOURCE_LEFT_PSG 2 + u_char gain; +#define CODEC_GAIN_RIGHT 0x0f +#define CODEC_GAIN_LEFT 0xf0 + u_char attenuation; +#define CODEC_ATTENUATION_RIGHT 0x0f +#define CODEC_ATTENUATION_LEFT 0xf0 + u_char unused1; + u_char status; +#define CODEC_OVERFLOW_RIGHT 1 +#define CODEC_OVERFLOW_LEFT 2 + u_char unused2, unused3, unused4, unused5; + u_char gpio_directions; +#define GPIO_IN 0 +#define GPIO_OUT 1 + u_char unused6; + u_char gpio_data; +}; +#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE) + +/* +** Falcon Blitter +*/ + +#define BLT_BAS (0xffff8a00) + +struct BLITTER + { + u_short halftone[16]; + u_short src_x_inc; + u_short src_y_inc; + u_long src_address; + u_short endmask1; + u_short endmask2; + u_short endmask3; + u_short dst_x_inc; + u_short dst_y_inc; + u_long dst_address; + u_short wd_per_line; + u_short ln_per_bb; + u_short hlf_op_reg; + u_short log_op_reg; + u_short lin_nm_reg; + u_short skew_reg; + }; +# define blitter ((*(volatile struct BLITTER *)BLT_BAS)) + + +/* +** SCC Z8530 + */ + +#define SCC_BAS (0xffff8c81) +struct SCC + { + u_char cha_a_ctrl; + u_char char_dummy1; + u_char cha_a_data; + u_char char_dummy2; + u_char cha_b_ctrl; + u_char char_dummy3; + u_char cha_b_data; + }; +# define scc ((*(volatile struct SCC*)SCC_BAS)) + +/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */ +# define st_escc ((*(volatile struct SCC*)0xfffffa31)) +# define st_escc_dsr ((*(volatile char *)0xfffffa39)) + +/* TT SCC DMA Controller (same chip as SCSI DMA) */ + +#define TT_SCC_DMA_BAS (0xffff8c00) +#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS)) + +/* +** VIDEL Palette Register + */ + +#define FPL_BAS (0xffff9800) +struct VIDEL_PALETTE + { + u_long reg[256]; + }; +# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS)) + + +/* +** Falcon DSP Host Interface + */ + +#define DSP56K_HOST_INTERFACE_BASE (0xffffa200) +struct DSP56K_HOST_INTERFACE { + u_char icr; +#define DSP56K_ICR_RREQ 0x01 +#define DSP56K_ICR_TREQ 0x02 +#define DSP56K_ICR_HF0 0x08 +#define DSP56K_ICR_HF1 0x10 +#define DSP56K_ICR_HM0 0x20 +#define DSP56K_ICR_HM1 0x40 +#define DSP56K_ICR_INIT 0x80 + + u_char cvr; +#define DSP56K_CVR_HV_MASK 0x1f +#define DSP56K_CVR_HC 0x80 + + u_char isr; +#define DSP56K_ISR_RXDF 0x01 +#define DSP56K_ISR_TXDE 0x02 +#define DSP56K_ISR_TRDY 0x04 +#define DSP56K_ISR_HF2 0x08 +#define DSP56K_ISR_HF3 0x10 +#define DSP56K_ISR_DMA 0x40 +#define DSP56K_ISR_HREQ 0x80 + + u_char ivr; + + union { + u_char b[4]; + u_short w[2]; + u_long l; + } data; +}; +#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE)) + +/* +** MFP 68901 + */ + +#define MFP_BAS (0xfffffa01) +struct MFP + { + u_char par_dt_reg; + u_char char_dummy1; + u_char active_edge; + u_char char_dummy2; + u_char data_dir; + u_char char_dummy3; + u_char int_en_a; + u_char char_dummy4; + u_char int_en_b; + u_char char_dummy5; + u_char int_pn_a; + u_char char_dummy6; + u_char int_pn_b; + u_char char_dummy7; + u_char int_sv_a; + u_char char_dummy8; + u_char int_sv_b; + u_char char_dummy9; + u_char int_mk_a; + u_char char_dummy10; + u_char int_mk_b; + u_char char_dummy11; + u_char vec_adr; + u_char char_dummy12; + u_char tim_ct_a; + u_char char_dummy13; + u_char tim_ct_b; + u_char char_dummy14; + u_char tim_ct_cd; + u_char char_dummy15; + u_char tim_dt_a; + u_char char_dummy16; + u_char tim_dt_b; + u_char char_dummy17; + u_char tim_dt_c; + u_char char_dummy18; + u_char tim_dt_d; + u_char char_dummy19; + u_char sync_char; + u_char char_dummy20; + u_char usart_ctr; + u_char char_dummy21; + u_char rcv_stat; + u_char char_dummy22; + u_char trn_stat; + u_char char_dummy23; + u_char usart_dta; + }; +# define mfp ((*(volatile struct MFP*)MFP_BAS)) + +/* TT's second MFP */ + +#define TT_MFP_BAS (0xfffffa81) +# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS)) + + +/* TT System Control Unit */ + +#define TT_SCU_BAS (0xffff8e01) +struct TT_SCU { + u_char sys_mask; + u_char char_dummy1; + u_char sys_stat; + u_char char_dummy2; + u_char softint; + u_char char_dummy3; + u_char vmeint; + u_char char_dummy4; + u_char gp_reg1; + u_char char_dummy5; + u_char gp_reg2; + u_char char_dummy6; + u_char vme_mask; + u_char char_dummy7; + u_char vme_stat; +}; +#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS)) + +/* TT real time clock */ + +#define TT_RTC_BAS (0xffff8961) +struct TT_RTC { + u_char regsel; + u_char dummy; + u_char data; +}; +#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS)) + + +/* +** ACIA 6850 + */ +/* constants for the ACIA registers */ + +/* baudrate selection and reset (Baudrate = clock/factor) */ +#define ACIA_DIV1 0 +#define ACIA_DIV16 1 +#define ACIA_DIV64 2 +#define ACIA_RESET 3 + +/* character format */ +#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */ +#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */ +#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */ +#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */ +#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */ +#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */ +#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */ +#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */ + +/* transmit control */ +#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */ +#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */ +#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */ +#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */ + +/* receive control */ +#define ACIA_RID (0<<7) /* RxINT disabled */ +#define ACIA_RIE (1<<7) /* RxINT enabled */ + +/* status fields of the ACIA */ +#define ACIA_RDRF 1 /* Receive Data Register Full */ +#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */ +#define ACIA_DCD (1<<2) /* Data Carrier Detect */ +#define ACIA_CTS (1<<3) /* Clear To Send */ +#define ACIA_FE (1<<4) /* Framing Error */ +#define ACIA_OVRN (1<<5) /* Receiver Overrun */ +#define ACIA_PE (1<<6) /* Parity Error */ +#define ACIA_IRQ (1<<7) /* Interrupt Request */ + +#define ACIA_BAS (0xfffffc00) +struct ACIA + { + u_char key_ctrl; + u_char char_dummy1; + u_char key_data; + u_char char_dummy2; + u_char mid_ctrl; + u_char char_dummy3; + u_char mid_data; + }; +# define acia ((*(volatile struct ACIA*)ACIA_BAS)) + +#define TT_DMASND_BAS (0xffff8900) +struct TT_DMASND { + u_char int_ctrl; /* Falcon: Interrupt control */ + u_char ctrl; + u_char pad2; + u_char bas_hi; + u_char pad3; + u_char bas_mid; + u_char pad4; + u_char bas_low; + u_char pad5; + u_char addr_hi; + u_char pad6; + u_char addr_mid; + u_char pad7; + u_char addr_low; + u_char pad8; + u_char end_hi; + u_char pad9; + u_char end_mid; + u_char pad10; + u_char end_low; + u_char pad11[12]; + u_char track_select; /* Falcon */ + u_char mode; + u_char pad12[14]; + /* Falcon only: */ + u_short cbar_src; + u_short cbar_dst; + u_char ext_div; + u_char int_div; + u_char rec_track_select; + u_char dac_src; + u_char adc_src; + u_char input_gain; + u_short output_atten; +}; +# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS)) + +#define DMASND_MFP_INT_REPLAY 0x01 +#define DMASND_MFP_INT_RECORD 0x02 +#define DMASND_TIMERA_INT_REPLAY 0x04 +#define DMASND_TIMERA_INT_RECORD 0x08 + +#define DMASND_CTRL_OFF 0x00 +#define DMASND_CTRL_ON 0x01 +#define DMASND_CTRL_REPEAT 0x02 +#define DMASND_CTRL_RECORD_ON 0x10 +#define DMASND_CTRL_RECORD_OFF 0x00 +#define DMASND_CTRL_RECORD_REPEAT 0x20 +#define DMASND_CTRL_SELECT_REPLAY 0x00 +#define DMASND_CTRL_SELECT_RECORD 0x80 +#define DMASND_MODE_MONO 0x80 +#define DMASND_MODE_STEREO 0x00 +#define DMASND_MODE_8BIT 0x00 +#define DMASND_MODE_16BIT 0x40 /* Falcon only */ +#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */ +#define DMASND_MODE_12KHZ 0x01 +#define DMASND_MODE_25KHZ 0x02 +#define DMASND_MODE_50KHZ 0x03 + + +#define DMASNDSetBase(bufstart) \ + do { \ + tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \ + tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \ + tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \ + } while( 0 ) + +#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \ + (tt_dmasnd.addr_mid << 8) + \ + (tt_dmasnd.addr_low)) + +#define DMASNDSetEnd(bufend) \ + do { \ + tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \ + tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \ + tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \ + } while( 0 ) + + +#define TT_MICROWIRE_BAS (0xffff8922) +struct TT_MICROWIRE { + u_short data; + u_short mask; +}; +# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS)) + +#define MW_LM1992_ADDR 0x0400 + +#define MW_LM1992_VOLUME(dB) \ + (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2))) +#define MW_LM1992_BALLEFT(dB) \ + (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) +#define MW_LM1992_BALRIGHT(dB) \ + (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) +#define MW_LM1992_TREBLE(dB) \ + (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) +#define MW_LM1992_BASS(dB) \ + (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) + +#define MW_LM1992_PSG_LOW 0x000 +#define MW_LM1992_PSG_HIGH 0x001 +#define MW_LM1992_PSG_OFF 0x002 + +#define MSTE_RTC_BAS (0xfffffc21) + +struct MSTE_RTC { + u_char sec_ones; + u_char dummy1; + u_char sec_tens; + u_char dummy2; + u_char min_ones; + u_char dummy3; + u_char min_tens; + u_char dummy4; + u_char hr_ones; + u_char dummy5; + u_char hr_tens; + u_char dummy6; + u_char weekday; + u_char dummy7; + u_char day_ones; + u_char dummy8; + u_char day_tens; + u_char dummy9; + u_char mon_ones; + u_char dummy10; + u_char mon_tens; + u_char dummy11; + u_char year_ones; + u_char dummy12; + u_char year_tens; + u_char dummy13; + u_char mode; + u_char dummy14; + u_char test; + u_char dummy15; + u_char reset; +}; + +#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS)) + +#endif /* linux/atarihw.h */ + diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h new file mode 100644 index 0000000..5748e99 --- /dev/null +++ b/arch/m68k/include/asm/atariints.h @@ -0,0 +1,204 @@ +/* +** atariints.h -- Atari Linux interrupt handling structs and prototypes +** +** Copyright 1994 by Björn Brauel +** +** 5/2/94 Roman Hodek: +** TT interrupt definitions added. +** +** 12/02/96: (Roman) +** Adapted to new int handling scheme (see ataints.c); revised numbering +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +*/ + +#ifndef _LINUX_ATARIINTS_H_ +#define _LINUX_ATARIINTS_H_ + +#include +#include + +/* +** Atari Interrupt sources. +** +*/ + +#define STMFP_SOURCE_BASE 8 +#define TTMFP_SOURCE_BASE 24 +#define SCC_SOURCE_BASE 40 +#define VME_SOURCE_BASE 56 +#define VME_MAX_SOURCES 16 + +#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE) + +/* convert vector number to int source number */ +#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8))) + +/* convert irq_handler index to vector number */ +#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8))) + +/* interrupt service types */ +#define IRQ_TYPE_SLOW 0 +#define IRQ_TYPE_FAST 1 +#define IRQ_TYPE_PRIO 2 + +/* ST-MFP interrupts */ +#define IRQ_MFP_BUSY (8) +#define IRQ_MFP_DCD (9) +#define IRQ_MFP_CTS (10) +#define IRQ_MFP_GPU (11) +#define IRQ_MFP_TIMD (12) +#define IRQ_MFP_TIMC (13) +#define IRQ_MFP_ACIA (14) +#define IRQ_MFP_FDC (15) +#define IRQ_MFP_ACSI IRQ_MFP_FDC +#define IRQ_MFP_FSCSI IRQ_MFP_FDC +#define IRQ_MFP_IDE IRQ_MFP_FDC +#define IRQ_MFP_TIMB (16) +#define IRQ_MFP_SERERR (17) +#define IRQ_MFP_SEREMPT (18) +#define IRQ_MFP_RECERR (19) +#define IRQ_MFP_RECFULL (20) +#define IRQ_MFP_TIMA (21) +#define IRQ_MFP_RI (22) +#define IRQ_MFP_MMD (23) + +/* TT-MFP interrupts */ +#define IRQ_TT_MFP_IO0 (24) +#define IRQ_TT_MFP_IO1 (25) +#define IRQ_TT_MFP_SCC (26) +#define IRQ_TT_MFP_RI (27) +#define IRQ_TT_MFP_TIMD (28) +#define IRQ_TT_MFP_TIMC (29) +#define IRQ_TT_MFP_DRVRDY (30) +#define IRQ_TT_MFP_SCSIDMA (31) +#define IRQ_TT_MFP_TIMB (32) +#define IRQ_TT_MFP_SERERR (33) +#define IRQ_TT_MFP_SEREMPT (34) +#define IRQ_TT_MFP_RECERR (35) +#define IRQ_TT_MFP_RECFULL (36) +#define IRQ_TT_MFP_TIMA (37) +#define IRQ_TT_MFP_RTC (38) +#define IRQ_TT_MFP_SCSI (39) + +/* SCC interrupts */ +#define IRQ_SCCB_TX (40) +#define IRQ_SCCB_STAT (42) +#define IRQ_SCCB_RX (44) +#define IRQ_SCCB_SPCOND (46) +#define IRQ_SCCA_TX (48) +#define IRQ_SCCA_STAT (50) +#define IRQ_SCCA_RX (52) +#define IRQ_SCCA_SPCOND (54) + + +#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ +#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ + + +#define MFP_ENABLE 0 +#define MFP_PENDING 1 +#define MFP_SERVICE 2 +#define MFP_MASK 3 + +/* Utility functions for setting/clearing bits in the interrupt registers of + * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is + * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */ + +static inline int get_mfp_bit( unsigned irq, int type ) + +{ unsigned char mask, *reg; + + mask = 1 << (irq & 7); + reg = (unsigned char *)&mfp.int_en_a + type*4 + + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); + return( *reg & mask ); +} + +static inline void set_mfp_bit( unsigned irq, int type ) + +{ unsigned char mask, *reg; + + mask = 1 << (irq & 7); + reg = (unsigned char *)&mfp.int_en_a + type*4 + + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); + __asm__ __volatile__ ( "orb %0,%1" + : : "di" (mask), "m" (*reg) : "memory" ); +} + +static inline void clear_mfp_bit( unsigned irq, int type ) + +{ unsigned char mask, *reg; + + mask = ~(1 << (irq & 7)); + reg = (unsigned char *)&mfp.int_en_a + type*4 + + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); + if (type == MFP_PENDING || type == MFP_SERVICE) + __asm__ __volatile__ ( "moveb %0,%1" + : : "di" (mask), "m" (*reg) : "memory" ); + else + __asm__ __volatile__ ( "andb %0,%1" + : : "di" (mask), "m" (*reg) : "memory" ); +} + +/* + * {en,dis}able_irq have the usual semantics of temporary blocking the + * interrupt, but not loosing requests that happen between disabling and + * enabling. This is done with the MFP mask registers. + */ + +static inline void atari_enable_irq( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; + set_mfp_bit( irq, MFP_MASK ); +} + +static inline void atari_disable_irq( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; + clear_mfp_bit( irq, MFP_MASK ); +} + +/* + * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not + * "stored" + */ + +static inline void atari_turnon_irq( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; + set_mfp_bit( irq, MFP_ENABLE ); +} + +static inline void atari_turnoff_irq( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; + clear_mfp_bit( irq, MFP_ENABLE ); + clear_mfp_bit( irq, MFP_PENDING ); +} + +static inline void atari_clear_pending_irq( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; + clear_mfp_bit( irq, MFP_PENDING ); +} + +static inline int atari_irq_pending( unsigned irq ) + +{ + if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 ); + return( get_mfp_bit( irq, MFP_PENDING ) ); +} + +unsigned long atari_register_vme_int( void ); +void atari_unregister_vme_int( unsigned long ); + +#endif /* linux/atariints.h */ diff --git a/arch/m68k/include/asm/atarikb.h b/arch/m68k/include/asm/atarikb.h new file mode 100644 index 0000000..546e7da --- /dev/null +++ b/arch/m68k/include/asm/atarikb.h @@ -0,0 +1,46 @@ +/* +** atarikb.h -- This header contains the prototypes of functions of +** the intelligent keyboard of the Atari needed by the +** mouse and joystick drivers. +** +** Copyright 1994 by Robert de Vries +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created: 20 Feb 1994 by Robert de Vries +*/ + +#ifndef _LINUX_ATARIKB_H +#define _LINUX_ATARIKB_H + +void ikbd_write(const char *, int); +void ikbd_mouse_button_action(int mode); +void ikbd_mouse_rel_pos(void); +void ikbd_mouse_abs_pos(int xmax, int ymax); +void ikbd_mouse_kbd_mode(int dx, int dy); +void ikbd_mouse_thresh(int x, int y); +void ikbd_mouse_scale(int x, int y); +void ikbd_mouse_pos_get(int *x, int *y); +void ikbd_mouse_pos_set(int x, int y); +void ikbd_mouse_y0_bot(void); +void ikbd_mouse_y0_top(void); +void ikbd_mouse_disable(void); +void ikbd_joystick_event_on(void); +void ikbd_joystick_event_off(void); +void ikbd_joystick_get_state(void); +void ikbd_joystick_disable(void); + +/* Hook for MIDI serial driver */ +extern void (*atari_MIDI_interrupt_hook) (void); +/* Hook for mouse driver */ +extern void (*atari_mouse_interrupt_hook) (char *); +/* Hook for keyboard inputdev driver */ +extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char); +/* Hook for mouse inputdev driver */ +extern void (*atari_input_mouse_interrupt_hook) (char *); + +int atari_keyb_init(void); + +#endif /* _LINUX_ATARIKB_H */ diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h new file mode 100644 index 0000000..8d29145 --- /dev/null +++ b/arch/m68k/include/asm/atomic.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "atomic_no.h" +#else +#include "atomic_mm.h" +#endif diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h new file mode 100644 index 0000000..eb0ab9d --- /dev/null +++ b/arch/m68k/include/asm/atomic_mm.h @@ -0,0 +1,196 @@ +#ifndef __ARCH_M68K_ATOMIC__ +#define __ARCH_M68K_ATOMIC__ + +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +/* + * We do not have SMP m68k systems, so we don't have to deal with that. + */ + +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +static inline void atomic_add(int i, atomic_t *v) +{ + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i)); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i)); +} + +static inline void atomic_inc(atomic_t *v) +{ + __asm__ __volatile__("addql #1,%0" : "+m" (*v)); +} + +static inline void atomic_dec(atomic_t *v) +{ + __asm__ __volatile__("subql #1,%0" : "+m" (*v)); +} + +static inline int atomic_dec_and_test(atomic_t *v) +{ + char c; + __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +static inline int atomic_inc_and_test(atomic_t *v) +{ + char c; + __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +#ifdef CONFIG_RMW_INSNS + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int t, tmp; + + __asm__ __volatile__( + "1: movel %2,%1\n" + " addl %3,%1\n" + " casl %2,%1,%0\n" + " jne 1b" + : "+m" (*v), "=&d" (t), "=&d" (tmp) + : "g" (i), "2" (atomic_read(v))); + return t; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int t, tmp; + + __asm__ __volatile__( + "1: movel %2,%1\n" + " subl %3,%1\n" + " casl %2,%1,%0\n" + " jne 1b" + : "+m" (*v), "=&d" (t), "=&d" (tmp) + : "g" (i), "2" (atomic_read(v))); + return t; +} + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +#else /* !CONFIG_RMW_INSNS */ + +static inline int atomic_add_return(int i, atomic_t * v) +{ + unsigned long flags; + int t; + + local_irq_save(flags); + t = atomic_read(v); + t += i; + atomic_set(v, t); + local_irq_restore(flags); + + return t; +} + +static inline int atomic_sub_return(int i, atomic_t * v) +{ + unsigned long flags; + int t; + + local_irq_save(flags); + t = atomic_read(v); + t -= i; + atomic_set(v, t); + local_irq_restore(flags); + + return t; +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + unsigned long flags; + int prev; + + local_irq_save(flags); + prev = atomic_read(v); + if (prev == old) + atomic_set(v, new); + local_irq_restore(flags); + return prev; +} + +static inline int atomic_xchg(atomic_t *v, int new) +{ + unsigned long flags; + int prev; + + local_irq_save(flags); + prev = atomic_read(v); + atomic_set(v, new); + local_irq_restore(flags); + return prev; +} + +#endif /* !CONFIG_RMW_INSNS */ + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +static inline int atomic_sub_and_test(int i, atomic_t *v) +{ + char c; + __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i)); + return c != 0; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + char c; + __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); + return c != 0; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); +} + +static inline void atomic_set_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); +} + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include +#endif /* __ARCH_M68K_ATOMIC __ */ diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h new file mode 100644 index 0000000..6bb6748 --- /dev/null +++ b/arch/m68k/include/asm/atomic_no.h @@ -0,0 +1,155 @@ +#ifndef __ARCH_M68KNOMMU_ATOMIC__ +#define __ARCH_M68KNOMMU_ATOMIC__ + +#include +#include + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +/* + * We do not have SMP m68k systems, so we don't have to deal with that. + */ + +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +static __inline__ void atomic_add(int i, atomic_t *v) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); +#else + __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); +#endif +} + +static __inline__ void atomic_sub(int i, atomic_t *v) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); +#else + __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); +#endif +} + +static __inline__ int atomic_sub_and_test(int i, atomic_t * v) +{ + char c; +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__("subl %2,%1; seq %0" + : "=d" (c), "+m" (*v) + : "d" (i)); +#else + __asm__ __volatile__("subl %2,%1; seq %0" + : "=d" (c), "+m" (*v) + : "di" (i)); +#endif + return c != 0; +} + +static __inline__ void atomic_inc(volatile atomic_t *v) +{ + __asm__ __volatile__("addql #1,%0" : "+m" (*v)); +} + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ + +static __inline__ int atomic_inc_and_test(volatile atomic_t *v) +{ + char c; + __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +static __inline__ void atomic_dec(volatile atomic_t *v) +{ + __asm__ __volatile__("subql #1,%0" : "+m" (*v)); +} + +static __inline__ int atomic_dec_and_test(volatile atomic_t *v) +{ + char c; + __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); + return c != 0; +} + +static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); +} + +static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) +{ + __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +static inline int atomic_add_return(int i, atomic_t * v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static inline int atomic_sub_return(int i, atomic_t * v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +#include +#endif /* __ARCH_M68KNOMMU_ATOMIC __ */ diff --git a/arch/m68k/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h new file mode 100644 index 0000000..844d6d5 --- /dev/null +++ b/arch/m68k/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMm68k_AUXVEC_H +#define __ASMm68k_AUXVEC_H + +#endif diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h new file mode 100644 index 0000000..ce163ab --- /dev/null +++ b/arch/m68k/include/asm/bitops.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bitops_no.h" +#else +#include "bitops_mm.h" +#endif diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h new file mode 100644 index 0000000..9bde784 --- /dev/null +++ b/arch/m68k/include/asm/bitops_mm.h @@ -0,0 +1,464 @@ +#ifndef _M68K_BITOPS_H +#define _M68K_BITOPS_H +/* + * Copyright 1992, Linus Torvalds. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include + +/* + * Require 68020 or better. + * + * They use the standard big-endian m680x0 bit ordering. + */ + +#define test_and_set_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_test_and_set_bit(nr, vaddr) : \ + __generic_test_and_set_bit(nr, vaddr)) + +#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr) + +static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + + return retval; +} + +static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0" + : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); + + return retval; +} + +#define set_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_set_bit(nr, vaddr) : \ + __generic_set_bit(nr, vaddr)) + +#define __set_bit(nr,vaddr) set_bit(nr,vaddr) + +static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + __asm__ __volatile__ ("bset %1,%0" + : "+m" (*p) : "di" (nr & 7)); +} + +static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfset %1{%0:#1}" + : : "d" (nr^31), "o" (*vaddr) : "memory"); +} + +#define test_and_clear_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_test_and_clear_bit(nr, vaddr) : \ + __generic_test_and_clear_bit(nr, vaddr)) + +#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr) + +static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + + return retval; +} + +static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0" + : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); + + return retval; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#define clear_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_clear_bit(nr, vaddr) : \ + __generic_clear_bit(nr, vaddr)) +#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr) + +static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + __asm__ __volatile__ ("bclr %1,%0" + : "+m" (*p) : "di" (nr & 7)); +} + +static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfclr %1{%0:#1}" + : : "d" (nr^31), "o" (*vaddr) : "memory"); +} + +#define test_and_change_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_test_and_change_bit(nr, vaddr) : \ + __generic_test_and_change_bit(nr, vaddr)) + +#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr) +#define __change_bit(nr,vaddr) change_bit(nr,vaddr) + +static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bchg %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + + return retval; +} + +static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0" + : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); + + return retval; +} + +#define change_bit(nr,vaddr) \ + (__builtin_constant_p(nr) ? \ + __constant_change_bit(nr, vaddr) : \ + __generic_change_bit(nr, vaddr)) + +static inline void __constant_change_bit(int nr, unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + __asm__ __volatile__ ("bchg %1,%0" + : "+m" (*p) : "di" (nr & 7)); +} + +static inline void __generic_change_bit(int nr, unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfchg %1{%0:#1}" + : : "d" (nr^31), "o" (*vaddr) : "memory"); +} + +static inline int test_bit(int nr, const unsigned long *vaddr) +{ + return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; +} + +static inline int find_first_zero_bit(const unsigned long *vaddr, + unsigned size) +{ + const unsigned long *p = vaddr; + int res = 32; + unsigned long num; + + if (!size) + return 0; + + size = (size + 31) >> 5; + while (!(num = ~*p++)) { + if (!--size) + goto out; + } + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + res ^= 31; +out: + return ((long)p - (long)vaddr - 4) * 8 + res; +} + +static inline int find_next_zero_bit(const unsigned long *vaddr, int size, + int offset) +{ + const unsigned long *p = vaddr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + unsigned long num = ~*p++ & (~0UL << bit); + offset -= bit; + + /* Look for zero in first longword */ + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + if (res < 32) + return offset + (res ^ 31); + offset += 32; + } + /* No zero yet, search remaining full bytes for a zero */ + res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8); + return offset + res; +} + +static inline int find_first_bit(const unsigned long *vaddr, unsigned size) +{ + const unsigned long *p = vaddr; + int res = 32; + unsigned long num; + + if (!size) + return 0; + + size = (size + 31) >> 5; + while (!(num = *p++)) { + if (!--size) + goto out; + } + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + res ^= 31; +out: + return ((long)p - (long)vaddr - 4) * 8 + res; +} + +static inline int find_next_bit(const unsigned long *vaddr, int size, + int offset) +{ + const unsigned long *p = vaddr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + unsigned long num = *p++ & (~0UL << bit); + offset -= bit; + + /* Look for one in first longword */ + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + if (res < 32) + return offset + (res ^ 31); + offset += 32; + } + /* No one yet, search remaining full bytes for a one */ + res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8); + return offset + res; +} + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static inline unsigned long ffz(unsigned long word) +{ + int res; + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (~word & -~word)); + return res ^ 31; +} + +#ifdef __KERNEL__ + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +static inline int ffs(int x) +{ + int cnt; + + asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x)); + + return 32 - cnt; +} +#define __ffs(x) (ffs(x) - 1) + +/* + * fls: find last bit set. + */ + +static inline int fls(int x) +{ + int cnt; + + asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x)); + + return 32 - cnt; +} + +static inline int __fls(int x) +{ + return fls(x) - 1; +} + +#include +#include +#include +#include + +/* Bitmap functions for the minix filesystem */ + +static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) +{ + const unsigned short *p = vaddr, *addr = vaddr; + int res; + unsigned short num; + + if (!size) + return 0; + + size = (size >> 4) + ((size & 15) > 0); + while (*p++ == 0xffff) + { + if (--size == 0) + return (p - addr) << 4; + } + + num = ~*--p; + __asm__ __volatile__ ("bfffo %1{#16,#16},%0" + : "=d" (res) : "d" (num & -num)); + return ((p - addr) << 4) + (res ^ 31); +} + +#define minix_test_and_set_bit(nr, addr) __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr)) +#define minix_set_bit(nr,addr) __set_bit((nr) ^ 16, (unsigned long *)(addr)) +#define minix_test_and_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr)) + +static inline int minix_test_bit(int nr, const void *vaddr) +{ + const unsigned short *p = vaddr; + return (p[nr >> 4] & (1U << (nr & 15))) != 0; +} + +/* Bitmap functions for the ext2 filesystem. */ + +#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) +#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) +#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) +#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) + +static inline int ext2_test_bit(int nr, const void *vaddr) +{ + const unsigned char *p = vaddr; + return (p[nr >> 3] & (1U << (nr & 7))) != 0; +} + +static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) +{ + const unsigned long *p = vaddr, *addr = vaddr; + int res; + + if (!size) + return 0; + + size = (size >> 5) + ((size & 31) > 0); + while (*p++ == ~0UL) + { + if (--size == 0) + return (p - addr) << 5; + } + + --p; + for (res = 0; res < 32; res++) + if (!ext2_test_bit (res, p)) + break; + return (p - addr) * 32 + res; +} + +static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, + unsigned offset) +{ + const unsigned long *addr = vaddr; + const unsigned long *p = addr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + /* Look for zero in first longword */ + for (res = bit; res < 32; res++) + if (!ext2_test_bit (res, p)) + return (p - addr) * 32 + res; + p++; + } + /* No zero yet, search remaining full bytes for a zero */ + res = ext2_find_first_zero_bit (p, size - 32 * (p - addr)); + return (p - addr) * 32 + res; +} + +static inline int ext2_find_first_bit(const void *vaddr, unsigned size) +{ + const unsigned long *p = vaddr, *addr = vaddr; + int res; + + if (!size) + return 0; + + size = (size >> 5) + ((size & 31) > 0); + while (*p++ == 0UL) { + if (--size == 0) + return (p - addr) << 5; + } + + --p; + for (res = 0; res < 32; res++) + if (ext2_test_bit(res, p)) + break; + return (p - addr) * 32 + res; +} + +static inline int ext2_find_next_bit(const void *vaddr, unsigned size, + unsigned offset) +{ + const unsigned long *addr = vaddr; + const unsigned long *p = addr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + /* Look for one in first longword */ + for (res = bit; res < 32; res++) + if (ext2_test_bit(res, p)) + return (p - addr) * 32 + res; + p++; + } + /* No set bit yet, search remaining full bytes for a set bit */ + res = ext2_find_first_bit(p, size - 32 * (p - addr)); + return (p - addr) * 32 + res; +} + +#endif /* __KERNEL__ */ + +#endif /* _M68K_BITOPS_H */ diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h new file mode 100644 index 0000000..9d3cbe5 --- /dev/null +++ b/arch/m68k/include/asm/bitops_no.h @@ -0,0 +1,337 @@ +#ifndef _M68KNOMMU_BITOPS_H +#define _M68KNOMMU_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include +#include /* swab32 */ + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline int ffs(unsigned int val) +{ + if (!val) + return 0; + + asm volatile( + "bitrev %0\n\t" + "ff1 %0\n\t" + : "=d" (val) + : "0" (val) + ); + val++; + return val; +} + +static inline int __ffs(unsigned int val) +{ + asm volatile( + "bitrev %0\n\t" + "ff1 %0\n\t" + : "=d" (val) + : "0" (val) + ); + return val; +} + +#else +#include +#include +#endif + +#include +#include + +static __inline__ void set_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bset %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __set_bit(nr, addr) set_bit(nr, addr) + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bclr %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __clear_bit(nr, addr) clear_bit(nr, addr) + +static __inline__ void change_bit(int nr, volatile unsigned long * addr) +{ +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0", "cc"); +#else + __asm__ __volatile__ ("bchg %1,%0" + : "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + : "cc"); +#endif +} + +#define __change_bit(nr, addr) change_bit(nr, addr) + +static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) + +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) + +static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bchg %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) +{ + int * a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include +#include +#include + +static __inline__ int ext2_set_bit(int nr, volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +static __inline__ int ext2_clear_bit(int nr, volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) + : "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define ext2_set_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_set_bit((nr), (addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +#define ext2_clear_bit_atomic(lock, nr, addr) \ + ({ \ + int ret; \ + spin_lock(lock); \ + ret = ext2_clear_bit((nr), (addr)); \ + spin_unlock(lock); \ + ret; \ + }) + +static __inline__ int ext2_test_bit(int nr, const volatile void * addr) +{ + char retval; + +#ifdef CONFIG_COLDFIRE + __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" + : "=d" (retval) + : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) + : "%a0"); +#else + __asm__ __volatile__ ("btst %2,%1; sne %0" + : "=d" (retval) + : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) + /* No clobber */); +#endif + + return retval; +} + +#define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if(offset) { + /* We hold the little endian value in tmp, but then the + * shift is illegal. So we could keep a big endian value + * in tmp, like this: + * + * tmp = __swab32(*(p++)); + * tmp |= ~0UL >> (32-offset); + * + * but this would decrease performance, so we change the + * shift: + */ + tmp = *(p++); + tmp |= __swab32(~0UL >> (32-offset)); + if(size < 32) + goto found_first; + if(~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while(size & ~31UL) { + if(~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if(!size) + return result; + tmp = *p; + +found_first: + /* tmp is little endian, so we would have to swab the shift, + * see above. But then we have to swab tmp below for ffz, so + * we might as well do this here. + */ + return result + ffz(__swab32(tmp) | (~0UL << size)); +found_middle: + return result + ffz(__swab32(tmp)); +} + +#define ext2_find_next_bit(addr, size, off) \ + generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) +#include + +#endif /* __KERNEL__ */ + +#include +#include +#include + +#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h new file mode 100644 index 0000000..1a749cf --- /dev/null +++ b/arch/m68k/include/asm/blinken.h @@ -0,0 +1,32 @@ +/* +** asm/blinken.h -- m68k blinkenlights support (currently hp300 only) +** +** (c) 1998 Phil Blundell +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +*/ + +#ifndef _M68K_BLINKEN_H +#define _M68K_BLINKEN_H + +#include +#include + +#define HP300_LEDS 0xf001ffff + +extern unsigned char ledstate; + +static __inline__ void blinken_leds(int on, int off) +{ + if (MACH_IS_HP300) + { + ledstate |= on; + ledstate &= ~off; + out_8(HP300_LEDS, ~ledstate); + } +} + +#endif diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h new file mode 100644 index 0000000..fedf3e3 --- /dev/null +++ b/arch/m68k/include/asm/bootinfo.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bootinfo_no.h" +#else +#include "bootinfo_mm.h" +#endif diff --git a/arch/m68k/include/asm/bootinfo_mm.h b/arch/m68k/include/asm/bootinfo_mm.h new file mode 100644 index 0000000..fb8a06b --- /dev/null +++ b/arch/m68k/include/asm/bootinfo_mm.h @@ -0,0 +1,378 @@ +/* +** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created 09/29/92 by Greg Harp +** +** 5/2/94 Roman Hodek: +** Added bi_atari part of the machine dependent union bi_un; for now it +** contains just a model field to distinguish between TT and Falcon. +** 26/7/96 Roman Zippel: +** Renamed to setup.h; added some useful macros to allow gcc some +** optimizations if possible. +** 5/10/96 Geert Uytterhoeven: +** Redesign of the boot information structure; renamed to bootinfo.h again +** 27/11/96 Geert Uytterhoeven: +** Backwards compatibility with bootinfo interface version 1.0 +*/ + +#ifndef _M68K_BOOTINFO_H +#define _M68K_BOOTINFO_H + + + /* + * Bootinfo definitions + * + * This is an easily parsable and extendable structure containing all + * information to be passed from the bootstrap to the kernel. + * + * This way I hope to keep all future changes back/forewards compatible. + * Thus, keep your fingers crossed... + * + * This structure is copied right after the kernel bss by the bootstrap + * routine. + */ + +#ifndef __ASSEMBLY__ + +struct bi_record { + unsigned short tag; /* tag ID */ + unsigned short size; /* size of record (in bytes) */ + unsigned long data[0]; /* data */ +}; + +#endif /* __ASSEMBLY__ */ + + + /* + * Tag Definitions + * + * Machine independent tags start counting from 0x0000 + * Machine dependent tags start counting from 0x8000 + */ + +#define BI_LAST 0x0000 /* last record (sentinel) */ +#define BI_MACHTYPE 0x0001 /* machine type (u_long) */ +#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */ +#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */ +#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */ +#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */ + /* (struct mem_info) */ +#define BI_RAMDISK 0x0006 /* ramdisk address and size */ + /* (struct mem_info) */ +#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */ + /* (string) */ + + /* + * Amiga-specific tags + */ + +#define BI_AMIGA_MODEL 0x8000 /* model (u_long) */ +#define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */ + /* (struct ConfigDev) */ +#define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (u_long) */ +#define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (u_char) */ +#define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (u_char) */ +#define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (u_long) */ +#define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (u_long) */ +#define BI_AMIGA_SERPER 0x8007 /* serial port period (u_short) */ + + /* + * Atari-specific tags + */ + +#define BI_ATARI_MCH_COOKIE 0x8000 /* _MCH cookie from TOS (u_long) */ +#define BI_ATARI_MCH_TYPE 0x8001 /* special machine type (u_long) */ + /* (values are ATARI_MACH_* defines */ + +/* mch_cookie values (upper word) */ +#define ATARI_MCH_ST 0 +#define ATARI_MCH_STE 1 +#define ATARI_MCH_TT 2 +#define ATARI_MCH_FALCON 3 + +/* mch_type values */ +#define ATARI_MACH_NORMAL 0 /* no special machine type */ +#define ATARI_MACH_MEDUSA 1 /* Medusa 040 */ +#define ATARI_MACH_HADES 2 /* Hades 040 or 060 */ +#define ATARI_MACH_AB40 3 /* Afterburner040 on Falcon */ + + /* + * VME-specific tags + */ + +#define BI_VME_TYPE 0x8000 /* VME sub-architecture (u_long) */ +#define BI_VME_BRDINFO 0x8001 /* VME board information (struct) */ + +/* BI_VME_TYPE codes */ +#define VME_TYPE_TP34V 0x0034 /* Tadpole TP34V */ +#define VME_TYPE_MVME147 0x0147 /* Motorola MVME147 */ +#define VME_TYPE_MVME162 0x0162 /* Motorola MVME162 */ +#define VME_TYPE_MVME166 0x0166 /* Motorola MVME166 */ +#define VME_TYPE_MVME167 0x0167 /* Motorola MVME167 */ +#define VME_TYPE_MVME172 0x0172 /* Motorola MVME172 */ +#define VME_TYPE_MVME177 0x0177 /* Motorola MVME177 */ +#define VME_TYPE_BVME4000 0x4000 /* BVM Ltd. BVME4000 */ +#define VME_TYPE_BVME6000 0x6000 /* BVM Ltd. BVME6000 */ + +/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on + * Motorola VME boards. Contains board number, Bug version, board + * configuration options, etc. See include/asm/mvme16xhw.h for details. + */ + + + /* + * Macintosh-specific tags (all u_long) + */ + +#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */ +#define BI_MAC_VADDR 0x8001 /* Mac video base address */ +#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */ +#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */ +#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */ +#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */ +#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */ +#define BI_MAC_BTIME 0x8007 /* Mac boot time */ +#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */ +#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */ +#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */ +#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */ + + /* + * Macintosh hardware profile data - unused, see macintosh.h for + * resonable type values + */ + +#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ +#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */ +#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */ +#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */ +#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */ +#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */ +#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */ +#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */ +#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */ +#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */ +#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */ +#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */ +#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */ +#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */ +#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */ +#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */ +#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */ +#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */ + + /* + * Mac: compatibility with old booter data format (temporarily) + * Fields unused with the new bootinfo can be deleted now; instead of + * adding new fields the struct might be splitted into a hardware address + * part and a hardware type part + */ + +#ifndef __ASSEMBLY__ + +struct mac_booter_data +{ + unsigned long videoaddr; + unsigned long videorow; + unsigned long videodepth; + unsigned long dimensions; + unsigned long args; + unsigned long boottime; + unsigned long gmtbias; + unsigned long bootver; + unsigned long videological; + unsigned long sccbase; + unsigned long id; + unsigned long memsize; + unsigned long serialmf; + unsigned long serialhsk; + unsigned long serialgpi; + unsigned long printmf; + unsigned long printhsk; + unsigned long printgpi; + unsigned long cpuid; + unsigned long rombase; + unsigned long adbdelay; + unsigned long timedbra; +}; + +extern struct mac_booter_data + mac_bi_data; + +#endif + + /* + * Apollo-specific tags + */ + +#define BI_APOLLO_MODEL 0x8000 /* model (u_long) */ + + /* + * HP300-specific tags + */ + +#define BI_HP300_MODEL 0x8000 /* model (u_long) */ +#define BI_HP300_UART_SCODE 0x8001 /* UART select code (u_long) */ +#define BI_HP300_UART_ADDR 0x8002 /* phys. addr of UART (u_long) */ + + /* + * Stuff for bootinfo interface versioning + * + * At the start of kernel code, a 'struct bootversion' is located. + * bootstrap checks for a matching version of the interface before booting + * a kernel, to avoid user confusion if kernel and bootstrap don't work + * together :-) + * + * If incompatible changes are made to the bootinfo interface, the major + * number below should be stepped (and the minor reset to 0) for the + * appropriate machine. If a change is backward-compatible, the minor + * should be stepped. "Backwards-compatible" means that booting will work, + * but certain features may not. + */ + +#define BOOTINFOV_MAGIC 0x4249561A /* 'BIV^Z' */ +#define MK_BI_VERSION(major,minor) (((major)<<16)+(minor)) +#define BI_VERSION_MAJOR(v) (((v) >> 16) & 0xffff) +#define BI_VERSION_MINOR(v) ((v) & 0xffff) + +#ifndef __ASSEMBLY__ + +struct bootversion { + unsigned short branch; + unsigned long magic; + struct { + unsigned long machtype; + unsigned long version; + } machversions[0]; +}; + +#endif /* __ASSEMBLY__ */ + +#define AMIGA_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define ATARI_BOOTI_VERSION MK_BI_VERSION( 2, 1 ) +#define MAC_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define MVME147_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define MVME16x_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define Q40_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) +#define HP300_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) + +#ifdef BOOTINFO_COMPAT_1_0 + + /* + * Backwards compatibility with bootinfo interface version 1.0 + */ + +#define COMPAT_AMIGA_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) +#define COMPAT_ATARI_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) +#define COMPAT_MAC_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) + +#include + +#define COMPAT_NUM_AUTO 16 + +struct compat_bi_Amiga { + int model; + int num_autocon; + struct ConfigDev autocon[COMPAT_NUM_AUTO]; + unsigned long chip_size; + unsigned char vblank; + unsigned char psfreq; + unsigned long eclock; + unsigned long chipset; + unsigned long hw_present; +}; + +struct compat_bi_Atari { + unsigned long hw_present; + unsigned long mch_cookie; +}; + +#ifndef __ASSEMBLY__ + +struct compat_bi_Macintosh +{ + unsigned long videoaddr; + unsigned long videorow; + unsigned long videodepth; + unsigned long dimensions; + unsigned long args; + unsigned long boottime; + unsigned long gmtbias; + unsigned long bootver; + unsigned long videological; + unsigned long sccbase; + unsigned long id; + unsigned long memsize; + unsigned long serialmf; + unsigned long serialhsk; + unsigned long serialgpi; + unsigned long printmf; + unsigned long printhsk; + unsigned long printgpi; + unsigned long cpuid; + unsigned long rombase; + unsigned long adbdelay; + unsigned long timedbra; +}; + +#endif + +struct compat_mem_info { + unsigned long addr; + unsigned long size; +}; + +#define COMPAT_NUM_MEMINFO 4 + +#define COMPAT_CPUB_68020 0 +#define COMPAT_CPUB_68030 1 +#define COMPAT_CPUB_68040 2 +#define COMPAT_CPUB_68060 3 +#define COMPAT_FPUB_68881 5 +#define COMPAT_FPUB_68882 6 +#define COMPAT_FPUB_68040 7 +#define COMPAT_FPUB_68060 8 + +#define COMPAT_CPU_68020 (1<= (unsigned long)(-64)) { \ + /* let errno be a function, preserve res in %d0 */ \ + int __err = -(res); \ + errno = __err; \ + res = -1; \ + } \ + return (type)(res); \ +} while (0) + +#define _bsc0(type,name) \ +type name(void) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc1(type,name,atype,a) \ +type name(atype a) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc2(type,name,atype,a,btype,b) \ +type name(atype a, btype b) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc3(type,name,atype,a,btype,b,ctype,c) \ +type name(atype a, btype b, ctype c) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ +type name(atype a, btype b, ctype c, dtype d) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + register long __d __asm__ ("%d4") = (long)d; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c), "d" (__d) \ + ); \ + __bsc_return(type,__res); \ +} + +#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ +type name(atype a, btype b, ctype c, dtype d, etype e) \ +{ \ + register long __res __asm__ ("%d0") = __BN_##name; \ + register long __a __asm__ ("%d1") = (long)a; \ + register long __b __asm__ ("%d2") = (long)b; \ + register long __c __asm__ ("%d3") = (long)c; \ + register long __d __asm__ ("%d4") = (long)d; \ + register long __e __asm__ ("%d5") = (long)e; \ + __asm__ __volatile__ ("trap #2" \ + : "=g" (__res) \ + : "0" (__res), "d" (__a), "d" (__b), \ + "d" (__c), "d" (__d), "d" (__e) \ + ); \ + __bsc_return(type,__res); \ +} + +#endif /* __BOOTSTD_H__ */ diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h new file mode 100644 index 0000000..997e094 --- /dev/null +++ b/arch/m68k/include/asm/bug.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bug_no.h" +#else +#include "bug_mm.h" +#endif diff --git a/arch/m68k/include/asm/bug_mm.h b/arch/m68k/include/asm/bug_mm.h new file mode 100644 index 0000000..e5b528d --- /dev/null +++ b/arch/m68k/include/asm/bug_mm.h @@ -0,0 +1,29 @@ +#ifndef _M68K_BUG_H +#define _M68K_BUG_H + + +#ifdef CONFIG_BUG +#ifdef CONFIG_DEBUG_BUGVERBOSE +#ifndef CONFIG_SUN3 +#define BUG() do { \ + printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ + __builtin_trap(); \ +} while (0) +#else +#define BUG() do { \ + printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ + panic("BUG!"); \ +} while (0) +#endif +#else +#define BUG() do { \ + __builtin_trap(); \ +} while (0) +#endif + +#define HAVE_ARCH_BUG +#endif + +#include + +#endif diff --git a/arch/m68k/include/asm/bug_no.h b/arch/m68k/include/asm/bug_no.h new file mode 100644 index 0000000..70e7dc0 --- /dev/null +++ b/arch/m68k/include/asm/bug_no.h @@ -0,0 +1,4 @@ +#ifndef _M68KNOMMU_BUG_H +#define _M68KNOMMU_BUG_H +#include +#endif diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h new file mode 100644 index 0000000..01f047d --- /dev/null +++ b/arch/m68k/include/asm/bugs.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bugs_no.h" +#else +#include "bugs_mm.h" +#endif diff --git a/arch/m68k/include/asm/bugs_mm.h b/arch/m68k/include/asm/bugs_mm.h new file mode 100644 index 0000000..d019355 --- /dev/null +++ b/arch/m68k/include/asm/bugs_mm.h @@ -0,0 +1,14 @@ +/* + * include/asm-m68k/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +extern void check_bugs(void); /* in arch/m68k/kernel/setup.c */ diff --git a/arch/m68k/include/asm/bugs_no.h b/arch/m68k/include/asm/bugs_no.h new file mode 100644 index 0000000..5f382da --- /dev/null +++ b/arch/m68k/include/asm/bugs_no.h @@ -0,0 +1,16 @@ +/* + * include/asm-m68k/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/arch/m68k/include/asm/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h new file mode 100644 index 0000000..f40d2f8 --- /dev/null +++ b/arch/m68k/include/asm/bvme6000hw.h @@ -0,0 +1,150 @@ +#ifndef _M68K_BVME6000HW_H_ +#define _M68K_BVME6000HW_H_ + +#include + +/* + * PIT structure + */ + +#define BVME_PIT_BASE 0xffa00000 + +typedef struct { + unsigned char + pad_a[3], pgcr, + pad_b[3], psrr, + pad_c[3], paddr, + pad_d[3], pbddr, + pad_e[3], pcddr, + pad_f[3], pivr, + pad_g[3], pacr, + pad_h[3], pbcr, + pad_i[3], padr, + pad_j[3], pbdr, + pad_k[3], paar, + pad_l[3], pbar, + pad_m[3], pcdr, + pad_n[3], psr, + pad_o[3], res1, + pad_p[3], res2, + pad_q[3], tcr, + pad_r[3], tivr, + pad_s[3], res3, + pad_t[3], cprh, + pad_u[3], cprm, + pad_v[3], cprl, + pad_w[3], res4, + pad_x[3], crh, + pad_y[3], crm, + pad_z[3], crl, + pad_A[3], tsr, + pad_B[3], res5; +} PitRegs_t, *PitRegsPtr; + +#define bvmepit ((*(volatile PitRegsPtr)(BVME_PIT_BASE))) + +#define BVME_RTC_BASE 0xff900000 + +typedef struct { + unsigned char + pad_a[3], msr, + pad_b[3], t0cr_rtmr, + pad_c[3], t1cr_omr, + pad_d[3], pfr_icr0, + pad_e[3], irr_icr1, + pad_f[3], bcd_tenms, + pad_g[3], bcd_sec, + pad_h[3], bcd_min, + pad_i[3], bcd_hr, + pad_j[3], bcd_dom, + pad_k[3], bcd_mth, + pad_l[3], bcd_year, + pad_m[3], bcd_ujcc, + pad_n[3], bcd_hjcc, + pad_o[3], bcd_dow, + pad_p[3], t0lsb, + pad_q[3], t0msb, + pad_r[3], t1lsb, + pad_s[3], t1msb, + pad_t[3], cmp_sec, + pad_u[3], cmp_min, + pad_v[3], cmp_hr, + pad_w[3], cmp_dom, + pad_x[3], cmp_mth, + pad_y[3], cmp_dow, + pad_z[3], sav_sec, + pad_A[3], sav_min, + pad_B[3], sav_hr, + pad_C[3], sav_dom, + pad_D[3], sav_mth, + pad_E[3], ram, + pad_F[3], test; +} RtcRegs_t, *RtcPtr_t; + + +#define BVME_I596_BASE 0xff100000 + +#define BVME_ETHIRQ_REG 0xff20000b + +#define BVME_LOCAL_IRQ_STAT 0xff20000f + +#define BVME_ETHERR 0x02 +#define BVME_ABORT_STATUS 0x08 + +#define BVME_NCR53C710_BASE 0xff000000 + +#define BVME_SCC_A_ADDR 0xffb0000b +#define BVME_SCC_B_ADDR 0xffb00003 +#define BVME_SCC_RTxC 7372800 + +#define BVME_CONFIG_REG 0xff500003 + +#define config_reg_ptr (volatile unsigned char *)BVME_CONFIG_REG + +#define BVME_CONFIG_SW1 0x08 +#define BVME_CONFIG_SW2 0x04 +#define BVME_CONFIG_SW3 0x02 +#define BVME_CONFIG_SW4 0x01 + + +#define BVME_IRQ_TYPE_PRIO 0 + +#define BVME_IRQ_PRN (IRQ_USER+20) +#define BVME_IRQ_TIMER (IRQ_USER+25) +#define BVME_IRQ_I596 IRQ_AUTO_2 +#define BVME_IRQ_SCSI IRQ_AUTO_3 +#define BVME_IRQ_RTC IRQ_AUTO_6 +#define BVME_IRQ_ABORT IRQ_AUTO_7 + +/* SCC interrupts */ +#define BVME_IRQ_SCC_BASE IRQ_USER +#define BVME_IRQ_SCCB_TX IRQ_USER +#define BVME_IRQ_SCCB_STAT (IRQ_USER+2) +#define BVME_IRQ_SCCB_RX (IRQ_USER+4) +#define BVME_IRQ_SCCB_SPCOND (IRQ_USER+6) +#define BVME_IRQ_SCCA_TX (IRQ_USER+8) +#define BVME_IRQ_SCCA_STAT (IRQ_USER+10) +#define BVME_IRQ_SCCA_RX (IRQ_USER+12) +#define BVME_IRQ_SCCA_SPCOND (IRQ_USER+14) + +/* Address control registers */ + +#define BVME_ACR_A32VBA 0xff400003 +#define BVME_ACR_A32MSK 0xff410003 +#define BVME_ACR_A24VBA 0xff420003 +#define BVME_ACR_A24MSK 0xff430003 +#define BVME_ACR_A16VBA 0xff440003 +#define BVME_ACR_A32LBA 0xff450003 +#define BVME_ACR_A24LBA 0xff460003 +#define BVME_ACR_ADDRCTL 0xff470003 + +#define bvme_acr_a32vba *(volatile unsigned char *)BVME_ACR_A32VBA +#define bvme_acr_a32msk *(volatile unsigned char *)BVME_ACR_A32MSK +#define bvme_acr_a24vba *(volatile unsigned char *)BVME_ACR_A24VBA +#define bvme_acr_a24msk *(volatile unsigned char *)BVME_ACR_A24MSK +#define bvme_acr_a16vba *(volatile unsigned char *)BVME_ACR_A16VBA +#define bvme_acr_a32lba *(volatile unsigned char *)BVME_ACR_A32LBA +#define bvme_acr_a24lba *(volatile unsigned char *)BVME_ACR_A24LBA +#define bvme_acr_addrctl *(volatile unsigned char *)BVME_ACR_ADDRCTL + +#endif diff --git a/arch/m68k/include/asm/byteorder.h b/arch/m68k/include/asm/byteorder.h new file mode 100644 index 0000000..f20502a --- /dev/null +++ b/arch/m68k/include/asm/byteorder.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "byteorder_no.h" +#else +#include "byteorder_mm.h" +#endif diff --git a/arch/m68k/include/asm/byteorder_mm.h b/arch/m68k/include/asm/byteorder_mm.h new file mode 100644 index 0000000..3008665 --- /dev/null +++ b/arch/m68k/include/asm/byteorder_mm.h @@ -0,0 +1,7 @@ +#ifndef _M68K_BYTEORDER_H +#define _M68K_BYTEORDER_H + +#include +#include + +#endif /* _M68K_BYTEORDER_H */ diff --git a/arch/m68k/include/asm/byteorder_no.h b/arch/m68k/include/asm/byteorder_no.h new file mode 100644 index 0000000..a6f0b8f --- /dev/null +++ b/arch/m68k/include/asm/byteorder_no.h @@ -0,0 +1,7 @@ +#ifndef _M68KNOMMU_BYTEORDER_H +#define _M68KNOMMU_BYTEORDER_H + +#include +#include + +#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h new file mode 100644 index 0000000..599c29b --- /dev/null +++ b/arch/m68k/include/asm/cache.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "cache_no.h" +#else +#include "cache_mm.h" +#endif diff --git a/arch/m68k/include/asm/cache_mm.h b/arch/m68k/include/asm/cache_mm.h new file mode 100644 index 0000000..fed3fd3 --- /dev/null +++ b/arch/m68k/include/asm/cache_mm.h @@ -0,0 +1,11 @@ +/* + * include/asm-m68k/cache.h + */ +#ifndef __ARCH_M68K_CACHE_H +#define __ARCH_M68K_CACHE_H + +/* bytes per L1 cache line */ +#define L1_CACHE_SHIFT 4 +#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT) + +#endif diff --git a/arch/m68k/include/asm/cache_no.h b/arch/m68k/include/asm/cache_no.h new file mode 100644 index 0000000..24e9eac --- /dev/null +++ b/arch/m68k/include/asm/cache_no.h @@ -0,0 +1,12 @@ +#ifndef __ARCH_M68KNOMMU_CACHE_H +#define __ARCH_M68KNOMMU_CACHE_H + +/* bytes per L1 cache line */ +#define L1_CACHE_BYTES 16 /* this need to be at least 1 */ + +/* m68k-elf-gcc 2.95.2 doesn't like these */ + +#define __cacheline_aligned +#define ____cacheline_aligned + +#endif diff --git a/arch/m68k/include/asm/cachectl.h b/arch/m68k/include/asm/cachectl.h new file mode 100644 index 0000000..525978e --- /dev/null +++ b/arch/m68k/include/asm/cachectl.h @@ -0,0 +1,14 @@ +#ifndef _M68K_CACHECTL_H +#define _M68K_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ +#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ +#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ + +#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ +#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ +#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ + +#endif /* _M68K_CACHECTL_H */ diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h new file mode 100644 index 0000000..a70d731 --- /dev/null +++ b/arch/m68k/include/asm/cacheflush.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "cacheflush_no.h" +#else +#include "cacheflush_mm.h" +#endif diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h new file mode 100644 index 0000000..16bf375 --- /dev/null +++ b/arch/m68k/include/asm/cacheflush_mm.h @@ -0,0 +1,156 @@ +#ifndef _M68K_CACHEFLUSH_H +#define _M68K_CACHEFLUSH_H + +#include + +/* cache code */ +#define FLUSH_I_AND_D (0x00000808) +#define FLUSH_I (0x00000008) + +/* + * Cache handling functions + */ + +static inline void flush_icache(void) +{ + if (CPU_IS_040_OR_060) + asm volatile ( "nop\n" + " .chip 68040\n" + " cpusha %bc\n" + " .chip 68k"); + else { + unsigned long tmp; + asm volatile ( "movec %%cacr,%0\n" + " or.w %1,%0\n" + " movec %0,%%cacr" + : "=&d" (tmp) + : "id" (FLUSH_I)); + } +} + +/* + * invalidate the cache for the specified memory range. + * It starts at the physical address specified for + * the given number of bytes. + */ +extern void cache_clear(unsigned long paddr, int len); +/* + * push any dirty cache in the specified memory range. + * It starts at the physical address specified for + * the given number of bytes. + */ +extern void cache_push(unsigned long paddr, int len); + +/* + * push and invalidate pages in the specified user virtual + * memory range. + */ +extern void cache_push_v(unsigned long vaddr, int len); + +/* This is needed whenever the virtual mapping of the current + process changes. */ +#define __flush_cache_all() \ +({ \ + if (CPU_IS_040_OR_060) \ + __asm__ __volatile__("nop\n\t" \ + ".chip 68040\n\t" \ + "cpusha %dc\n\t" \ + ".chip 68k"); \ + else { \ + unsigned long _tmp; \ + __asm__ __volatile__("movec %%cacr,%0\n\t" \ + "orw %1,%0\n\t" \ + "movec %0,%%cacr" \ + : "=&d" (_tmp) \ + : "di" (FLUSH_I_AND_D)); \ + } \ +}) + +#define __flush_cache_030() \ +({ \ + if (CPU_IS_020_OR_030) { \ + unsigned long _tmp; \ + __asm__ __volatile__("movec %%cacr,%0\n\t" \ + "orw %1,%0\n\t" \ + "movec %0,%%cacr" \ + : "=&d" (_tmp) \ + : "di" (FLUSH_I_AND_D)); \ + } \ +}) + +#define flush_cache_all() __flush_cache_all() + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +static inline void flush_cache_mm(struct mm_struct *mm) +{ + if (mm == current->mm) + __flush_cache_030(); +} + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +/* flush_cache_range/flush_cache_page must be macros to avoid + a dependency on linux/mm.h, which includes this file... */ +static inline void flush_cache_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end) +{ + if (vma->vm_mm == current->mm) + __flush_cache_030(); +} + +static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn) +{ + if (vma->vm_mm == current->mm) + __flush_cache_030(); +} + + +/* Push the page at kernel virtual address and clear the icache */ +/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ +static inline void __flush_page_to_ram(void *vaddr) +{ + if (CPU_IS_040_OR_060) { + __asm__ __volatile__("nop\n\t" + ".chip 68040\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (__pa(vaddr))); + } else { + unsigned long _tmp; + __asm__ __volatile__("movec %%cacr,%0\n\t" + "orw %1,%0\n\t" + "movec %0,%%cacr" + : "=&d" (_tmp) + : "di" (FLUSH_I)); + } +} + +#define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) + +extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); +extern void flush_icache_range(unsigned long address, unsigned long endaddr); + +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + flush_cache_page(vma, vaddr, page_to_pfn(page)); + memcpy(dst, src, len); + flush_icache_user_range(vma, page, vaddr, len); +} +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + flush_cache_page(vma, vaddr, page_to_pfn(page)); + memcpy(dst, src, len); +} + +#endif /* _M68K_CACHEFLUSH_H */ diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h new file mode 100644 index 0000000..87e5dc04 --- /dev/null +++ b/arch/m68k/include/asm/cacheflush_no.h @@ -0,0 +1,84 @@ +#ifndef _M68KNOMMU_CACHEFLUSH_H +#define _M68KNOMMU_CACHEFLUSH_H + +/* + * (C) Copyright 2000-2004, Greg Ungerer + */ +#include + +#define flush_cache_all() __flush_cache_all() +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) __flush_cache_all() +#define flush_cache_page(vma, vmaddr) do { } while (0) +#define flush_dcache_range(start,len) __flush_cache_all() +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start,len) __flush_cache_all() +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +static inline void __flush_cache_all(void) +{ +#ifdef CONFIG_M5407 + /* + * Use cpushl to push and invalidate all cache lines. + * Gas doesn't seem to know how to generate the ColdFire + * cpushl instruction... Oh well, bit stuff it for now. + */ + __asm__ __volatile__ ( + "nop\n\t" + "clrl %%d0\n\t" + "1:\n\t" + "movel %%d0,%%a0\n\t" + "2:\n\t" + ".word 0xf468\n\t" + "addl #0x10,%%a0\n\t" + "cmpl #0x00000800,%%a0\n\t" + "blt 2b\n\t" + "addql #1,%%d0\n\t" + "cmpil #4,%%d0\n\t" + "bne 1b\n\t" + "movel #0xb6088500,%%d0\n\t" + "movec %%d0,%%CACR\n\t" + : : : "d0", "a0" ); +#endif /* CONFIG_M5407 */ +#if defined(CONFIG_M527x) || defined(CONFIG_M528x) + __asm__ __volatile__ ( + "movel #0x81000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M527x || CONFIG_M528x */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) + __asm__ __volatile__ ( + "movel #0x81000100, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ +#ifdef CONFIG_M5249 + __asm__ __volatile__ ( + "movel #0xa1000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M5249 */ +#ifdef CONFIG_M532x + __asm__ __volatile__ ( + "movel #0x81000200, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M532x */ +} + +#endif /* _M68KNOMMU_CACHEFLUSH_H */ diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h new file mode 100644 index 0000000..1cf5447 --- /dev/null +++ b/arch/m68k/include/asm/checksum.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "checksum_no.h" +#else +#include "checksum_mm.h" +#endif diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h new file mode 100644 index 0000000..494f9ae --- /dev/null +++ b/arch/m68k/include/asm/checksum_mm.h @@ -0,0 +1,148 @@ +#ifndef _M68K_CHECKSUM_H +#define _M68K_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, + int len, __wsum sum, + int *csum_err); + +extern __wsum csum_partial_copy_nocheck(const void *src, + void *dst, int len, + __wsum sum); + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum = 0; + unsigned long tmp; + + __asm__ ("subqw #1,%2\n" + "1:\t" + "movel %1@+,%3\n\t" + "addxl %3,%0\n\t" + "dbra %2,1b\n\t" + "movel %0,%3\n\t" + "swap %3\n\t" + "addxw %3,%0\n\t" + "clrw %3\n\t" + "addxw %3,%0\n\t" + : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) + : "0" (sum), "1" (iph), "2" (ihl) + : "memory"); + return (__force __sum16)~sum; +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" + "addxw %1, %0" + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (tmp)); + return (__force __sum16)~sum; +} + + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("addl %2,%0\n\t" + "addxl %3,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=d" (saddr) + : "g" (daddr), "1" (saddr), "d" (len + proto), + "0" (sum)); + return sum; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + register unsigned long tmp; + __asm__("addl %2@,%0\n\t" + "movel %2@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(12),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@,%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(12),%1\n\t" + "addxl %1,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (tmp) + : "a" (saddr), "a" (daddr), "d" (len + proto), + "0" (sum)); + + return csum_fold(sum); +} + +#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h new file mode 100644 index 0000000..8188348 --- /dev/null +++ b/arch/m68k/include/asm/checksum_no.h @@ -0,0 +1,132 @@ +#ifndef _M68K_CHECKSUM_H +#define _M68K_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, int len, __wsum sum, int *csum_err); + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; +#ifdef CONFIG_COLDFIRE + tmp = (tmp & 0xffff) + (tmp >> 16); + tmp = (tmp & 0xffff) + (tmp >> 16); + return (__force __sum16)~tmp; +#else + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" + "addxw %1, %0" + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (sum)); + return (__force __sum16)~sum; +#endif +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("addl %1,%0\n\t" + "addxl %4,%0\n\t" + "addxl %5,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (saddr) + : "0" (daddr), "1" (saddr), "d" (len + proto), + "d"(sum)); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + register unsigned long tmp; + __asm__("addl %2@,%0\n\t" + "movel %2@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(12),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@,%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(12),%1\n\t" + "addxl %1,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (tmp) + : "a" (saddr), "a" (daddr), "d" (len + proto), + "0" (sum)); + + return csum_fold(sum); +} + +#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h new file mode 100644 index 0000000..83a9fa4 --- /dev/null +++ b/arch/m68k/include/asm/coldfire.h @@ -0,0 +1,51 @@ +/****************************************************************************/ + +/* + * coldfire.h -- Motorola ColdFire CPU sepecific defines + * + * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef coldfire_h +#define coldfire_h +/****************************************************************************/ + + +/* + * Define master clock frequency. This is essentially done at config + * time now. No point enumerating dozens of possible clock options + * here. Also the peripheral clock (bus clock) divide ratio is set + * at config time too. + */ +#ifdef CONFIG_CLOCK_SET +#define MCF_CLK CONFIG_CLOCK_FREQ +#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) +#else +#error "Don't know what your ColdFire CPU clock frequency is??" +#endif + +/* + * Define the processor support peripherals base address. + * This is generally setup by the boards start up code. + */ +#define MCF_MBAR 0x10000000 +#define MCF_MBAR2 0x80000000 +#if defined(CONFIG_M520x) +#define MCF_IPSBAR 0xFC000000 +#else +#define MCF_IPSBAR 0x40000000 +#endif + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M520x) +#undef MCF_MBAR +#define MCF_MBAR MCF_IPSBAR +#elif defined(CONFIG_M532x) +#undef MCF_MBAR +#define MCF_MBAR 0x00000000 +#endif + +/****************************************************************************/ +#endif /* coldfire_h */ diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h new file mode 100644 index 0000000..edf5eb6 --- /dev/null +++ b/arch/m68k/include/asm/commproc.h @@ -0,0 +1,703 @@ + +/* + * 68360 Communication Processor Module. + * Copyright (c) 2000 Michael Leslie (mc68360) after: + * Copyright (c) 1997 Dan Malek (mpc8xx) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * through the 68360 internal memory map. See include/asm/360_immap.h for details. + * This file is not a complete map of all of the 360 QUICC's capabilities + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM_360__ +#define __CPM_360__ + + +/* CPM Command register masks: */ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* CPM Command set (opcodes): */ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRSTOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) +#define CPM_CR_GCI_ABORT ((ushort)0x000a) +#define CPM_CR_RESET_BCS ((ushort)0x000a) + +/* CPM Channel numbers. */ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ +#define CPM_CR_CH_TMR ((ushort)0x0005) +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ +#define CPM_CR_CH_IDMA1 ((ushort)0x0009) +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ +#define CPM_CR_CH_IDMA2 ((ushort)0x000d) + + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +#if 1 /* mleslie: I dinna think we have any such restrictions on + * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ + +/* The dual ported RAM is multi-functional. Some areas can be (and are + * being) used for microcode. There is an area that can only be used + * as data ram for buffer descriptors, which is all we use right now. + * Currently the first 512 and last 256 bytes are used for microcode. + */ +/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ +#define CPM_DATAONLY_BASE ((uint)0x0000) +#define CPM_DATAONLY_SIZE ((uint)0x0800) +#define CPM_DP_NOSPACE ((uint)0x7fffffff) + +#endif + + +/* Export the base address of the communication processor registers + * and dual port ram. */ +/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ +extern QUICC *pquicc; +uint m360_cpm_dpalloc(uint size); +/* void *m360_cpm_hostalloc(uint size); */ +void m360_cpm_setbrg(uint brg, uint rate); + +#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; +#endif + + +/* rx bd status/control bits */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ + +#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ +#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ + +#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ + +#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ +#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ + +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ + +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ + +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ + +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ + +/* tx bd status/control bits (as differ from rx bd) */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_UN ((ushort)0x0002) /* Underrun */ + + + + +/* Parameter RAM offsets. */ + + + +/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. + * In 2.0, we use a more structured C struct map of DPRAM, and so + * instead, we need only a parameter ram `slot' */ + +#define PRSLOT_SCC1 0 +#define PRSLOT_SCC2 1 +#define PRSLOT_SCC3 2 +#define PRSLOT_SMC1 2 +#define PRSLOT_SCC4 3 +#define PRSLOT_SMC2 3 + + +/* #define PROFF_SCC1 ((uint)0x0000) */ +/* #define PROFF_SCC2 ((uint)0x0100) */ +/* #define PROFF_SCC3 ((uint)0x0200) */ +/* #define PROFF_SMC1 ((uint)0x0280) */ +/* #define PROFF_SCC4 ((uint)0x0300) */ +/* #define PROFF_SMC2 ((uint)0x0380) */ + + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + + +/* Function code bits. + */ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ +#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + + +#if defined (CONFIG_UCQUICC) +/* uCquicc has the following signals connected to Ethernet: + * 68360 - lxt905 + * PA0/RXD1 - rxd + * PA1/TXD1 - txd + * PA8/CLK1 - tclk + * PA9/CLK2 - rclk + * PC0/!RTS1 - t_en + * PC1/!CTS1 - col + * PC5/!CD1 - cd + */ +#define PA_ENET_RXD PA_RXD1 +#define PA_ENET_TXD PA_TXD1 +#define PA_ENET_TCLK PA_CLK1 +#define PA_ENET_RCLK PA_CLK2 +#define PC_ENET_TENA PC_RTS1 +#define PC_ENET_CLSN PC_CTS1 +#define PC_ENET_RENA PC_CD1 + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) + +#endif /* config_ucquicc */ + + +#ifdef MBX +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. The TCLK and RCLK seem unique + * to the MBX860 board. Any two of the four available clocks could be + * used, and the MPC860 cookbook manual has an example using different + * clock pins. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PC_ENET_TENA ((ushort)0x0001) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000003d) +#endif + +#ifdef CONFIG_RPXLITE +/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of + * this may be unique to the RPX-Lite configuration. + * Note TENA is on Port B. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0200) +#define PA_ENET_RCLK ((ushort)0x0800) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00003d00) +#endif + +#ifdef CONFIG_BSEIP +/* This ENET stuff is for the MPC823 with ethernet on SCC2. + * This is unique to the BSE ip-Engine board. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* BSE uses port B and C bits for PHY control also. +*/ +#define PB_BSE_POWERUP ((uint)0x00000004) +#define PB_BSE_FDXDIS ((uint)0x00008000) +#define PC_BSE_LOOPBACK ((ushort)0x0800) + +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002c00) +#endif + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* Buffer descriptor control/status used by Ethernet receive. +*/ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. +*/ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PMSR_FLC ((ushort)0x8000) +#define SCU_PMSR_SL ((ushort)0x4000) +#define SCU_PMSR_CL ((ushort)0x3000) +#define SCU_PMSR_UM ((ushort)0x0c00) +#define SCU_PMSR_FRZ ((ushort)0x0200) +#define SCU_PMSR_RZS ((ushort)0x0100) +#define SCU_PMSR_SYN ((ushort)0x0080) +#define SCU_PMSR_DRT ((ushort)0x0040) +#define SCU_PMSR_PEN ((ushort)0x0010) +#define SCU_PMSR_RPM ((ushort)0x000c) +#define SCU_PMSR_REVP ((ushort)0x0008) +#define SCU_PMSR_TPM ((ushort)0x0003) +#define SCU_PMSR_TEVP ((ushort)0x0003) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +#define BD_SCC_TX_LAST ((ushort)0x0800) + + + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +/* #define CPMVEC_NR 32 */ +/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ +/* #define CPMVEC_SCC1 ((ushort)0x1e) */ +/* #define CPMVEC_SCC2 ((ushort)0x1d) */ +/* #define CPMVEC_SCC3 ((ushort)0x1c) */ +/* #define CPMVEC_SCC4 ((ushort)0x1b) */ +/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ +/* #define CPMVEC_TIMER1 ((ushort)0x19) */ +/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ +/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ +/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ +/* #define CPMVEC_IDMA1 ((ushort)0x15) */ +/* #define CPMVEC_IDMA2 ((ushort)0x14) */ +/* #define CPMVEC_TIMER2 ((ushort)0x12) */ +/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ +/* #define CPMVEC_I2C ((ushort)0x10) */ +/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ +/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ +/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ +/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ +/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ +/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ +/* #define CPMVEC_TIMER4 ((ushort)0x07) */ +/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ +/* #define CPMVEC_SPI ((ushort)0x05) */ +/* #define CPMVEC_SMC1 ((ushort)0x04) */ +/* #define CPMVEC_SMC2 ((ushort)0x03) */ +/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ +/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ +/* #define CPMVEC_ERROR ((ushort)0x00) */ + +extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ +#endif /* __CPM_360__ */ diff --git a/arch/m68k/include/asm/contregs.h b/arch/m68k/include/asm/contregs.h new file mode 100644 index 0000000..d1ea750 --- /dev/null +++ b/arch/m68k/include/asm/contregs.h @@ -0,0 +1,53 @@ +#ifndef _M68K_CONTREGS_H +#define _M68K_CONTREGS_H + +/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address + * space. These are for the mmu's context register, etc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* 3=sun3 + 4=sun4 (as in sun4 sysmaint student book) + c=sun4c (according to davem) */ + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ +#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ +#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ +#define AC_M_CXR 0x0200 /* shv Context Register */ +#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ +#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ +#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ +#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ +#define AC_M_RESET 0x0700 /* hv Reset Reg */ +#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ +#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ +#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ +#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ +#define AC_M_ITR 0x1300 /* hv Index Tag Register */ +#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ +#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ +#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ +#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ +#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ +#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ + +#endif /* _M68K_CONTREGS_H */ diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h new file mode 100644 index 0000000..c79c5e8 --- /dev/null +++ b/arch/m68k/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __M68K_CPUTIME_H +#define __M68K_CPUTIME_H + +#include + +#endif /* __M68K_CPUTIME_H */ diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h new file mode 100644 index 0000000..51b056d --- /dev/null +++ b/arch/m68k/include/asm/current.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "current_no.h" +#else +#include "current_mm.h" +#endif diff --git a/arch/m68k/include/asm/current_mm.h b/arch/m68k/include/asm/current_mm.h new file mode 100644 index 0000000..8de8f8c --- /dev/null +++ b/arch/m68k/include/asm/current_mm.h @@ -0,0 +1,6 @@ +#ifndef _M68K_CURRENT_H +#define _M68K_CURRENT_H + +register struct task_struct *current __asm__("%a2"); + +#endif /* !(_M68K_CURRENT_H) */ diff --git a/arch/m68k/include/asm/current_no.h b/arch/m68k/include/asm/current_no.h new file mode 100644 index 0000000..53ee0f9 --- /dev/null +++ b/arch/m68k/include/asm/current_no.h @@ -0,0 +1,24 @@ +#ifndef _M68KNOMMU_CURRENT_H +#define _M68KNOMMU_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ + +#include + +struct task_struct; + +static inline struct task_struct *get_current(void) +{ + return(current_thread_info()->task); +} + +#define current get_current() + +#endif /* _M68KNOMMU_CURRENT_H */ diff --git a/arch/m68k/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h new file mode 100644 index 0000000..27af327 --- /dev/null +++ b/arch/m68k/include/asm/dbg.h @@ -0,0 +1,6 @@ +#define DEBUG 1 +#ifdef CONFIG_COLDFIRE +#define BREAK asm volatile ("halt") +#else +#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 +#endif diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h new file mode 100644 index 0000000..d2598e3 --- /dev/null +++ b/arch/m68k/include/asm/delay.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "delay_no.h" +#else +#include "delay_mm.h" +#endif diff --git a/arch/m68k/include/asm/delay_mm.h b/arch/m68k/include/asm/delay_mm.h new file mode 100644 index 0000000..5ed9285 --- /dev/null +++ b/arch/m68k/include/asm/delay_mm.h @@ -0,0 +1,57 @@ +#ifndef _M68K_DELAY_H +#define _M68K_DELAY_H + +#include + +/* + * Copyright (C) 1994 Hamish Macdonald + * + * Delay routines, using a pre-computed "loops_per_jiffy" value. + */ + +static inline void __delay(unsigned long loops) +{ + __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" + : "=d" (loops) : "0" (loops)); +} + +extern void __bad_udelay(void); + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +static inline void __const_udelay(unsigned long xloops) +{ + unsigned long tmp; + + __asm__ ("mulul %2,%0:%1" + : "=d" (xloops), "=d" (tmp) + : "d" (xloops), "1" (loops_per_jiffy)); + __delay(xloops * HZ); +} + +static inline void __udelay(unsigned long usecs) +{ + __const_udelay(usecs * 4295); /* 2**32 / 1000000 */ +} + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \ + __udelay(n)) + +static inline unsigned long muldiv(unsigned long a, unsigned long b, + unsigned long c) +{ + unsigned long tmp; + + __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" + : "=d" (tmp), "=d" (a) + : "d" (b), "d" (c), "1" (a)); + return a; +} + +#endif /* defined(_M68K_DELAY_H) */ diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h new file mode 100644 index 0000000..55cbd62 --- /dev/null +++ b/arch/m68k/include/asm/delay_no.h @@ -0,0 +1,76 @@ +#ifndef _M68KNOMMU_DELAY_H +#define _M68KNOMMU_DELAY_H + +/* + * Copyright (C) 1994 Hamish Macdonald + * Copyright (C) 2004 Greg Ungerer + */ + +#include + +static inline void __delay(unsigned long loops) +{ +#if defined(CONFIG_COLDFIRE) + /* The coldfire runs this loop at significantly different speeds + * depending upon long word alignment or not. We'll pad it to + * long word alignment which is the faster version. + * The 0x4a8e is of course a 'tstl %fp' instruction. This is better + * than using a NOP (0x4e71) instruction because it executes in one + * cycle not three and doesn't allow for an arbitary delay waiting + * for bus cycles to finish. Also fp/a6 isn't likely to cause a + * stall waiting for the register to become valid if such is added + * to the coldfire at some stage. + */ + __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" + "1: subql #1, %0\n\t" + "jcc 1b" + : "=d" (loops) : "0" (loops)); +#else + __asm__ __volatile__ ( "1: subql #1, %0\n\t" + "jcc 1b" + : "=d" (loops) : "0" (loops)); +#endif +} + +/* + * Ideally we use a 32*32->64 multiply to calculate the number of + * loop iterations, but the older standard 68k and ColdFire do not + * have this instruction. So for them we have a clsoe approximation + * loop using 32*32->32 multiplies only. This calculation based on + * the ARM version of delay. + * + * We want to implement: + * + * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 + */ + +#define HZSCALE (268435456 / (1000000/HZ)) + +extern unsigned long loops_per_jiffy; + +static inline void _udelay(unsigned long usecs) +{ +#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ + defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ + defined(CONFIG_COLDFIRE) + __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); +#else + unsigned long tmp; + + usecs *= 4295; /* 2**32 / 1000000 */ + __asm__ ("mulul %2,%0:%1" + : "=d" (usecs), "=d" (tmp) + : "d" (usecs), "1" (loops_per_jiffy*HZ)); + __delay(usecs); +#endif +} + +/* + * Moved the udelay() function into library code, no longer inlined. + * I had to change the algorithm because we are overflowing now on + * the faster ColdFire parts. The code is a little bigger, so it makes + * sense to library it. + */ +extern void udelay(unsigned long usecs); + +#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h new file mode 100644 index 0000000..d8f9872 --- /dev/null +++ b/arch/m68k/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h new file mode 100644 index 0000000..d211d9f5 --- /dev/null +++ b/arch/m68k/include/asm/div64.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "div64_no.h" +#else +#include "div64_mm.h" +#endif diff --git a/arch/m68k/include/asm/div64_mm.h b/arch/m68k/include/asm/div64_mm.h new file mode 100644 index 0000000..8243c93 --- /dev/null +++ b/arch/m68k/include/asm/div64_mm.h @@ -0,0 +1,28 @@ +#ifndef _M68K_DIV64_H +#define _M68K_DIV64_H + +#include + +/* n = n / base; return rem; */ + +#define do_div(n, base) ({ \ + union { \ + unsigned long n32[2]; \ + unsigned long long n64; \ + } __n; \ + unsigned long __rem, __upper; \ + \ + __n.n64 = (n); \ + if ((__upper = __n.n32[0])) { \ + asm ("divul.l %2,%1:%0" \ + : "=d" (__n.n32[0]), "=d" (__upper) \ + : "d" (base), "0" (__n.n32[0])); \ + } \ + asm ("divu.l %2,%1:%0" \ + : "=d" (__n.n32[1]), "=d" (__rem) \ + : "d" (base), "1" (__upper), "0" (__n.n32[1])); \ + (n) = __n.n64; \ + __rem; \ +}) + +#endif /* _M68K_DIV64_H */ diff --git a/arch/m68k/include/asm/div64_no.h b/arch/m68k/include/asm/div64_no.h new file mode 100644 index 0000000..6cd978c --- /dev/null +++ b/arch/m68k/include/asm/div64_no.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h new file mode 100644 index 0000000..f4a4c76 --- /dev/null +++ b/arch/m68k/include/asm/dma-mapping.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "dma-mapping_no.h" +#else +#include "dma-mapping_mm.h" +#endif diff --git a/arch/m68k/include/asm/dma-mapping_mm.h b/arch/m68k/include/asm/dma-mapping_mm.h new file mode 100644 index 0000000..26f5054 --- /dev/null +++ b/arch/m68k/include/asm/dma-mapping_mm.h @@ -0,0 +1,112 @@ +#ifndef _M68K_DMA_MAPPING_H +#define _M68K_DMA_MAPPING_H + +#include + +struct scatterlist; + +#ifndef CONFIG_MMU_SUN3 +static inline int dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static inline int dma_set_mask(struct device *dev, u64 mask) +{ + return 0; +} + +static inline int dma_get_cache_alignment(void) +{ + return 1 << L1_CACHE_SHIFT; +} + +static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +extern void *dma_alloc_coherent(struct device *, size_t, + dma_addr_t *, gfp_t); +extern void dma_free_coherent(struct device *, size_t, + void *, dma_addr_t); + +static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t flag) +{ + return dma_alloc_coherent(dev, size, handle, flag); +} +static inline void dma_free_noncoherent(struct device *dev, size_t size, + void *addr, dma_addr_t handle) +{ + dma_free_coherent(dev, size, addr, handle); +} +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir) +{ + /* we use coherent allocation, so not much to do here. */ +} + +extern dma_addr_t dma_map_single(struct device *, void *, size_t, + enum dma_data_direction); +static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ +} + +extern dma_addr_t dma_map_page(struct device *, struct page *, + unsigned long, size_t size, + enum dma_data_direction); +static inline void dma_unmap_page(struct device *dev, dma_addr_t address, + size_t size, enum dma_data_direction dir) +{ +} + +extern int dma_map_sg(struct device *, struct scatterlist *, int, + enum dma_data_direction); +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction dir) +{ +} + +extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t, + enum dma_data_direction); +extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, + enum dma_data_direction); + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_device(dev, dma_handle, offset + size, direction); +} + +static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) +{ +} + +static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t handle) +{ + return 0; +} + +#else +#include +#endif + +#endif /* _M68K_DMA_MAPPING_H */ diff --git a/arch/m68k/include/asm/dma-mapping_no.h b/arch/m68k/include/asm/dma-mapping_no.h new file mode 100644 index 0000000..6aeab18 --- /dev/null +++ b/arch/m68k/include/asm/dma-mapping_no.h @@ -0,0 +1,10 @@ +#ifndef _M68KNOMMU_DMA_MAPPING_H +#define _M68KNOMMU_DMA_MAPPING_H + +#ifdef CONFIG_PCI +#include +#else +#include +#endif + +#endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h new file mode 100644 index 0000000..b82e660 --- /dev/null +++ b/arch/m68k/include/asm/dma.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "dma_no.h" +#else +#include "dma_mm.h" +#endif diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h new file mode 100644 index 0000000..4240fbc --- /dev/null +++ b/arch/m68k/include/asm/dma_mm.h @@ -0,0 +1,16 @@ +#ifndef _M68K_DMA_H +#define _M68K_DMA_H 1 + + +/* it's useless on the m68k, but unfortunately needed by the new + bootmem allocator (but this should do it for this) */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +#define MAX_DMA_CHANNELS 8 + +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#define isa_dma_bridge_buggy (0) + +#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h new file mode 100644 index 0000000..939a020 --- /dev/null +++ b/arch/m68k/include/asm/dma_no.h @@ -0,0 +1,494 @@ +#ifndef _M68K_DMA_H +#define _M68K_DMA_H 1 + +//#define DMA_DEBUG 1 + + +#ifdef CONFIG_COLDFIRE +/* + * ColdFire DMA Model: + * ColdFire DMA supports two forms of DMA: Single and Dual address. Single + * address mode emits a source address, and expects that the device will either + * pick up the data (DMA READ) or source data (DMA WRITE). This implies that + * the device will place data on the correct byte(s) of the data bus, as the + * memory transactions are always 32 bits. This implies that only 32 bit + * devices will find single mode transfers useful. Dual address DMA mode + * performs two cycles: source read and destination write. ColdFire will + * align the data so that the device will always get the correct bytes, thus + * is useful for 8 and 16 bit devices. This is the mode that is supported + * below. + * + * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * APR/18/2002 : added proper support for MCF5272 DMA controller. + * Arthur Shipkowski (art@videon-central.com) + */ + +#include +#include +#include + +/* + * Set number of channels of DMA on ColdFire for different implementations. + */ +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ + defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MAX_M68K_DMA_CHANNELS 4 +#elif defined(CONFIG_M5272) +#define MAX_M68K_DMA_CHANNELS 1 +#elif defined(CONFIG_M532x) +#define MAX_M68K_DMA_CHANNELS 0 +#else +#define MAX_M68K_DMA_CHANNELS 2 +#endif + +extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +#if !defined(CONFIG_M5272) +#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ +#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ +#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ +#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ 0 +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE 1 +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD 2 +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD 3 +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG 4 +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG 5 +/* I/O to memory, 8 bits, single-address-mode */ +#define DMA_MODE_READ_SINGLE 8 +/* memory to I/O, 8 bits, single-address-mode */ +#define DMA_MODE_WRITE_SINGLE 9 +/* I/O to memory, 16 bits, single-address-mode */ +#define DMA_MODE_READ_WORD_SINGLE 10 +/* memory to I/O, 16 bits, single-address-mode */ +#define DMA_MODE_WRITE_WORD_SINGLE 11 +/* I/O to memory, 32 bits, single-address-mode */ +#define DMA_MODE_READ_LONG_SINGLE 12 +/* memory to I/O, 32 bits, single-address-mode */ +#define DMA_MODE_WRITE_LONG_SINGLE 13 + +#else /* CONFIG_M5272 is defined */ + +/* Source static-address mode */ +#define DMA_MODE_SRC_SA_BIT 0x01 +/* Two bits to select between all four modes */ +#define DMA_MODE_SSIZE_MASK 0x06 +/* Offset to shift bits in */ +#define DMA_MODE_SSIZE_OFF 0x01 +/* Destination static-address mode */ +#define DMA_MODE_DES_SA_BIT 0x10 +/* Two bits to select between all four modes */ +#define DMA_MODE_DSIZE_MASK 0x60 +/* Offset to shift bits in */ +#define DMA_MODE_DSIZE_OFF 0x05 +/* Size modifiers */ +#define DMA_MODE_SIZE_LONG 0x00 +#define DMA_MODE_SIZE_BYTE 0x01 +#define DMA_MODE_SIZE_WORD 0x02 +#define DMA_MODE_SIZE_LINE 0x03 + +/* + * Aliases to help speed quick ports; these may be suboptimal, however. They + * do not include the SINGLE mode modifiers since the MCF5272 does not have a + * mode where the device is in control of its addressing. + */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) + +#endif /* !defined(CONFIG_M5272) */ + +#if !defined(CONFIG_M5272) +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + volatile unsigned char *dmapb; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmapb = (unsigned char *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; + dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned char *dmabp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + + dmabp = (unsigned char *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + // Clear config errors + dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; + + // Set command register + dmawp[MCFDMA_DCR] = + MCFDMA_DCR_INT | // Enable completion irq + MCFDMA_DCR_CS | // Force one xfer per request + MCFDMA_DCR_AA | // Enable auto alignment + // single-address-mode + ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | + // sets s_rw (-> r/w) high if Memory to I/0 + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | + // Memory to I/O or I/O to Memory + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | + // 32 bit, 16 bit or 8 bit transfers + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : + MCFDMA_DCR_SSIZE_BYTE)) | + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : + MCFDMA_DCR_DSIZE_BYTE)); + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], + (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned short *dmawp; + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + // Determine which address registers are used for memory/device accesses + if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { + // Source incrementing, must be memory + dmalp[MCFDMA_SAR] = a; + // Set dest address, must be device + dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; + } else { + // Destination incrementing, must be memory + dmalp[MCFDMA_DAR] = a; + // Set source address, must be device + dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], + (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], + (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_BCR] = (unsigned short)count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + unsigned short count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + count = dmawp[MCFDMA_BCR]; + return((int) count); +} +#else /* CONFIG_M5272 is defined */ + +/* + * The MCF5272 DMA controller is very different than the controller defined above + * in terms of register mapping. For instance, with the exception of the 16-bit + * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. + * + * The big difference, however, is the lack of device-requested DMA. All modes + * are dual address transfer, and there is no 'device' setup or direction bit. + * You can DMA between a device and memory, between memory and memory, or even between + * two devices directly, with any combination of incrementing and non-incrementing + * addresses you choose. This puts a crimp in distinguishing between the 'device + * address' set up by set_dma_device_addr. + * + * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, + * which will act exactly as above in -- it will look to see if the source is set to + * autoincrement, and if so it will make the source use the set_dma_addr value and the + * destination the set_dma_device_addr value. Otherwise the source will be set to the + * set_dma_device_addr value and the destination will get the set_dma_addr value. + * + * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions + * and make it explicit. Depending on what you're doing, one of these two should work + * for you, but don't mix them in the same transfer setup. + */ + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned int *dmalp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + // Clear config errors + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; + + // Set command register + dmalp[MCFDMA_DMR] = + MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting + MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. + MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. + // source static-address-mode + ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | + // dest static-address-mode + ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | + // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); + + dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], + (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + // Determine which address registers are used for memory/device accesses + if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { + // Source incrementing, must be memory + dmalp[MCFDMA_DSAR] = a; + // Set dest address, must be device + dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; + } else { + // Destination incrementing, must be memory + dmalp[MCFDMA_DDAR] = a; + // Set source address, must be device + dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], + (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], + (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + * + * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DBCR] = count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + unsigned int count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + count = dmalp[MCFDMA_DBCR]; + return(count); +} + +#endif /* !defined(CONFIG_M5272) */ +#endif /* CONFIG_COLDFIRE */ + +#define MAX_DMA_CHANNELS 8 + +/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any + occurrence should be flagged as an error. */ +/* under 2.4 it is actually needed by the new bootmem allocator */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dsp56k.h b/arch/m68k/include/asm/dsp56k.h new file mode 100644 index 0000000..2d8c0c9 --- /dev/null +++ b/arch/m68k/include/asm/dsp56k.h @@ -0,0 +1,35 @@ +/* + * linux/include/asm-m68k/dsp56k.h - defines and declarations for + * DSP56k device driver + * + * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + + +/* Used for uploading DSP binary code */ +struct dsp56k_upload { + int len; + char __user *bin; +}; + +/* For the DSP host flags */ +struct dsp56k_host_flags { + int dir; /* Bit field. 1 = write output bit, 0 = do nothing. + * 0x0000 means reading only, 0x0011 means + * writing the bits stored in `out' on HF0 and HF1. + * Note that HF2 and HF3 can only be read. + */ + int out; /* Bit field like above. */ + int status; /* Host register's current state is returned */ +}; + +/* ioctl command codes */ +#define DSP56K_UPLOAD 1 /* Upload DSP binary program */ +#define DSP56K_SET_TX_WSIZE 2 /* Host transmit word size (1-4) */ +#define DSP56K_SET_RX_WSIZE 3 /* Host receive word size (1-4) */ +#define DSP56K_HOST_FLAGS 4 /* Host flag registers */ +#define DSP56K_HOST_CMD 5 /* Trig Host Command (0-31) */ diff --git a/arch/m68k/include/asm/dvma.h b/arch/m68k/include/asm/dvma.h new file mode 100644 index 0000000..890bbf7 --- /dev/null +++ b/arch/m68k/include/asm/dvma.h @@ -0,0 +1,240 @@ +/* + * include/asm-m68k/dma.h + * + * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu) + * + * Hacked to fit Sun3x needs by Thomas Bogendoerfer + */ + +#ifndef __M68K_DVMA_H +#define __M68K_DVMA_H + + +#define DVMA_PAGE_SHIFT 13 +#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT) +#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1)) +#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE) + +extern void dvma_init(void); +extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr, + int len); + +#define dvma_malloc(x) dvma_malloc_align(x, 0) +#define dvma_map(x, y) dvma_map_align(x, y, 0) +#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff) +#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff) +extern unsigned long dvma_map_align(unsigned long kaddr, int len, + int align); +extern void *dvma_malloc_align(unsigned long len, unsigned long align); + +extern void dvma_unmap(void *baddr); +extern void dvma_free(void *vaddr); + + +#ifdef CONFIG_SUN3 +/* sun3 dvma page support */ + +/* memory and pmegs potentially reserved for dvma */ +#define DVMA_PMEG_START 10 +#define DVMA_PMEG_END 16 +#define DVMA_START 0xf00000 +#define DVMA_END 0xfe0000 +#define DVMA_SIZE (DVMA_END-DVMA_START) +#define IOMMU_TOTAL_ENTRIES 128 +#define IOMMU_ENTRIES 120 + +/* empirical kludge -- dvma regions only seem to work right on 0x10000 + byte boundaries */ +#define DVMA_REGION_SIZE 0x10000 +#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \ + ~(DVMA_REGION_SIZE-1)) + +/* virt <-> phys conversions */ +#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff) +#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000) +#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff) +#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000) +#define dvma_vtob(x) dvma_vtop(x) +#define dvma_btov(x) dvma_ptov(x) + +static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, + int len) +{ + return 0; +} + +#else /* Sun3x */ + +/* sun3x dvma page support */ + +#define DVMA_START 0x0 +#define DVMA_END 0xf00000 +#define DVMA_SIZE (DVMA_END-DVMA_START) +#define IOMMU_TOTAL_ENTRIES 2048 +/* the prom takes the top meg */ +#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80) + +#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff) +#define dvma_btov(x) ((unsigned long)(x) | 0xff000000) + +extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len); + + + +/* everything below this line is specific to dma used for the onboard + ESP scsi on sun3x */ + +/* Structure to describe the current status of DMA registers on the Sparc */ +struct sparc_dma_registers { + __volatile__ unsigned long cond_reg; /* DMA condition register */ + __volatile__ unsigned long st_addr; /* Start address of this transfer */ + __volatile__ unsigned long cnt; /* How many bytes to transfer */ + __volatile__ unsigned long dma_test; /* DMA test register */ +}; + +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; + +#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) + +/* Linux DMA information structure, filled during probe. */ +struct Linux_SBus_DMA { + struct Linux_SBus_DMA *next; + struct linux_sbus_device *SBus_dev; + struct sparc_dma_registers *regs; + + /* Status, misc info */ + int node; /* Prom node for this DMA device */ + int running; /* Are we doing DMA now? */ + int allocated; /* Are we "owned" by anyone yet? */ + + /* Transfer information. */ + unsigned long addr; /* Start address of current transfer */ + int nbytes; /* Size of current transfer */ + int realbytes; /* For splitting up large transfers, etc. */ + + /* DMA revision */ + enum dvma_rev revision; +}; + +extern struct Linux_SBus_DMA *dma_chain; + +/* Broken hardware... */ +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) +#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* Determine highest possible final transfer address given a base */ +#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) + +/* Yes, I hack a lot of elisp in my spare time... */ +#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) +#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) +#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) +#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) +#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) +#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) +#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) +#define DMA_BEGINDMA_W(regs) \ + ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) +#define DMA_BEGINDMA_R(regs) \ + ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) + +/* For certain DMA chips, we need to disable ints upon irq entry + * and turn them back on when we are done. So in any ESP interrupt + * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT + * when leaving the handler. You have been warned... + */ +#define DMA_IRQ_ENTRY(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ + } while (0) + +#define DMA_IRQ_EXIT(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ + } while(0) + +/* Reset the friggin' thing... */ +#define DMA_RESET(dma) do { \ + struct sparc_dma_registers *regs = dma->regs; \ + /* Let the current FIFO drain itself */ \ + sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ + /* Reset the logic */ \ + regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ + __delay(400); /* let the bits set ;) */ \ + regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ + sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ + /* Enable FAST transfers if available */ \ + if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ + dma->running = 0; \ +} while(0) + + +#endif /* !CONFIG_SUN3 */ + +#endif /* !(__M68K_DVMA_H) */ diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h new file mode 100644 index 0000000..04ce488 --- /dev/null +++ b/arch/m68k/include/asm/elf.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "elf_no.h" +#else +#include "elf_mm.h" +#endif diff --git a/arch/m68k/include/asm/elf_mm.h b/arch/m68k/include/asm/elf_mm.h new file mode 100644 index 0000000..0b0f49e --- /dev/null +++ b/arch/m68k/include/asm/elf_mm.h @@ -0,0 +1,119 @@ +#ifndef __ASMm68k_ELF_H +#define __ASMm68k_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include + +/* + * 68k ELF relocation types + */ +#define R_68K_NONE 0 +#define R_68K_32 1 +#define R_68K_16 2 +#define R_68K_8 3 +#define R_68K_PC32 4 +#define R_68K_PC16 5 +#define R_68K_PC8 6 +#define R_68K_GOT32 7 +#define R_68K_GOT16 8 +#define R_68K_GOT8 9 +#define R_68K_GOT32O 10 +#define R_68K_GOT16O 11 +#define R_68K_GOT8O 12 +#define R_68K_PLT32 13 +#define R_68K_PLT16 14 +#define R_68K_PLT8 15 +#define R_68K_PLT32O 16 +#define R_68K_PLT16O 17 +#define R_68K_PLT8O 18 +#define R_68K_COPY 19 +#define R_68K_GLOB_DAT 20 +#define R_68K_JMP_SLOT 21 +#define R_68K_RELATIVE 22 + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_m68kfp_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_68K) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_68K + +/* For SVR4/m68k the function pointer to be registered with `atexit' is + passed in %a1. Although my copy of the ABI has no such statement, it + is actually used on ASV. */ +#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 + +#define USE_ELF_CORE_DUMP +#ifndef CONFIG_SUN3 +#define ELF_EXEC_PAGESIZE 4096 +#else +#define ELF_EXEC_PAGESIZE 8192 +#endif + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#ifndef CONFIG_SUN3 +#define ELF_ET_DYN_BASE 0xD0000000UL +#else +#define ELF_ET_DYN_BASE 0x0D800000UL +#endif + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + /* Bleech. */ \ + pr_reg[0] = regs->d1; \ + pr_reg[1] = regs->d2; \ + pr_reg[2] = regs->d3; \ + pr_reg[3] = regs->d4; \ + pr_reg[4] = regs->d5; \ + pr_reg[7] = regs->a0; \ + pr_reg[8] = regs->a1; \ + pr_reg[9] = regs->a2; \ + pr_reg[14] = regs->d0; \ + pr_reg[15] = rdusp(); \ + pr_reg[16] = regs->orig_d0; \ + pr_reg[17] = regs->sr; \ + pr_reg[18] = regs->pc; \ + pr_reg[19] = (regs->format << 12) | regs->vector; \ + { \ + struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ + pr_reg[5] = sw->d6; \ + pr_reg[6] = sw->d7; \ + pr_reg[10] = sw->a3; \ + pr_reg[11] = sw->a4; \ + pr_reg[12] = sw->a5; \ + pr_reg[13] = sw->a6; \ + } + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif diff --git a/arch/m68k/include/asm/elf_no.h b/arch/m68k/include/asm/elf_no.h new file mode 100644 index 0000000..b804683 --- /dev/null +++ b/arch/m68k/include/asm/elf_no.h @@ -0,0 +1,110 @@ +#ifndef __ASMm68k_ELF_H +#define __ASMm68k_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include + +/* + * 68k ELF relocation types + */ +#define R_68K_NONE 0 +#define R_68K_32 1 +#define R_68K_16 2 +#define R_68K_8 3 +#define R_68K_PC32 4 +#define R_68K_PC16 5 +#define R_68K_PC8 6 +#define R_68K_GOT32 7 +#define R_68K_GOT16 8 +#define R_68K_GOT8 9 +#define R_68K_GOT32O 10 +#define R_68K_GOT16O 11 +#define R_68K_GOT8O 12 +#define R_68K_PLT32 13 +#define R_68K_PLT16 14 +#define R_68K_PLT8 15 +#define R_68K_PLT32O 16 +#define R_68K_PLT16O 17 +#define R_68K_PLT8O 18 +#define R_68K_COPY 19 +#define R_68K_GLOB_DAT 20 +#define R_68K_JMP_SLOT 21 +#define R_68K_RELATIVE 22 + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_m68kfp_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_68K) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_68K + +/* For SVR4/m68k the function pointer to be registered with `atexit' is + passed in %a1. Although my copy of the ABI has no such statement, it + is actually used on ASV. */ +#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + /* Bleech. */ \ + pr_reg[0] = regs->d1; \ + pr_reg[1] = regs->d2; \ + pr_reg[2] = regs->d3; \ + pr_reg[3] = regs->d4; \ + pr_reg[4] = regs->d5; \ + pr_reg[7] = regs->a0; \ + pr_reg[8] = regs->a1; \ + pr_reg[14] = regs->d0; \ + pr_reg[15] = rdusp(); \ + pr_reg[16] = 0 /* regs->orig_d0 */; \ + pr_reg[17] = regs->sr; \ + pr_reg[18] = regs->pc; \ + /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ + { \ + struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ + pr_reg[5] = sw->d6; \ + pr_reg[6] = sw->d7; \ + pr_reg[10] = sw->a3; \ + pr_reg[11] = sw->a4; \ + pr_reg[12] = sw->a5; \ + pr_reg[13] = sw->a6; \ + } + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h new file mode 100644 index 0000000..e037d4e --- /dev/null +++ b/arch/m68k/include/asm/elia.h @@ -0,0 +1,41 @@ +/****************************************************************************/ + +/* + * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. + * + * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) + * (C) Copyright 1999-2000, Lineo (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef elia_h +#define elia_h +/****************************************************************************/ + +#include + +#ifdef CONFIG_eLIA + +/* + * The serial port DTR and DCD lines are also on the Parallel I/O + * as well, so define those too. + */ + +#define eLIA_DCD1 0x0001 +#define eLIA_DCD0 0x0002 +#define eLIA_DTR1 0x0004 +#define eLIA_DTR0 0x0008 + +#define eLIA_PCIRESET 0x0020 + +/* + * Kernel macros to set and unset the LEDs. + */ +#ifndef __ASSEMBLY__ +extern unsigned short ppdata; +#endif /* __ASSEMBLY__ */ + +#endif /* CONFIG_eLIA */ + +/****************************************************************************/ +#endif /* elia_h */ diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h new file mode 100644 index 0000000..108d8c4 --- /dev/null +++ b/arch/m68k/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h new file mode 100644 index 0000000..876eec6 --- /dev/null +++ b/arch/m68k/include/asm/entry.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "entry_no.h" +#else +#include "entry_mm.h" +#endif diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h new file mode 100644 index 0000000..5202f5a --- /dev/null +++ b/arch/m68k/include/asm/entry_mm.h @@ -0,0 +1,137 @@ +#ifndef __M68K_ENTRY_H +#define __M68K_ENTRY_H + +#include +#include + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - sr + * 2E(sp) - pc + * 32(sp) - format & vector + */ + +/* + * 97/05/14 Andreas: Register %a2 is now set to the current task throughout + * the whole kernel. + */ + +/* the following macro is used when enabling interrupts */ +#if defined(MACH_ATARI_ONLY) + /* block out HSYNC on the atari */ +#define ALLOWINT (~0x400) +#define MAX_NOINT_IPL 3 +#else + /* portable version */ +#define ALLOWINT (~0x700) +#define MAX_NOINT_IPL 0 +#endif /* machine compilation types */ + +#ifdef __ASSEMBLY__ + +#define curptr a2 + +LFLUSH_I_AND_D = 0x00000808 +LSIGTRAP = 5 + +/* process bits for task_struct.ptrace */ +PT_TRACESYS_OFF = 3 +PT_TRACESYS_BIT = 1 +PT_PTRACED_OFF = 3 +PT_PTRACED_BIT = 0 +PT_DTRACE_OFF = 3 +PT_DTRACE_BIT = 2 + +#define SAVE_ALL_INT save_all_int +#define SAVE_ALL_SYS save_all_sys +#define RESTORE_ALL restore_all +/* + * This defines the normal kernel pt-regs layout. + * + * regs a3-a6 and d6-d7 are preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ + +/* + * a -1 in the orig_d0 field signifies + * that the stack frame is NOT for syscall + */ +.macro save_all_int + clrl %sp@- | stk_adj + pea -1:w | orig d0 + movel %d0,%sp@- | d0 + moveml %d1-%d5/%a0-%a1/%curptr,%sp@- +.endm + +.macro save_all_sys + clrl %sp@- | stk_adj + movel %d0,%sp@- | orig d0 + movel %d0,%sp@- | d0 + moveml %d1-%d5/%a0-%a1/%curptr,%sp@- +.endm + +.macro restore_all + moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp | orig d0 + addl %sp@+,%sp | stk adj + rte +.endm + +#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ + +#define SAVE_SWITCH_STACK save_switch_stack +#define RESTORE_SWITCH_STACK restore_switch_stack +#define GET_CURRENT(tmp) get_current tmp + +.macro save_switch_stack + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro restore_switch_stack + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +.macro get_current reg=%d0 + movel %sp,\reg + andw #-THREAD_SIZE,\reg + movel \reg,%curptr + movel %curptr@,%curptr +.endm + +#else /* C source */ + +#define STR(X) STR1(X) +#define STR1(X) #X + +#define PT_OFF_ORIG_D0 0x24 +#define PT_OFF_FORMATVEC 0x32 +#define PT_OFF_SR 0x2C +#define SAVE_ALL_INT \ + "clrl %%sp@-;" /* stk_adj */ \ + "pea -1:w;" /* orig d0 = -1 */ \ + "movel %%d0,%%sp@-;" /* d0 */ \ + "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" +#define GET_CURRENT(tmp) \ + "movel %%sp,"#tmp"\n\t" \ + "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ + "movel "#tmp",%%a2\n\t" \ + "movel %%a2@,%%a2" + +#endif + +#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h new file mode 100644 index 0000000..c2553d2 --- /dev/null +++ b/arch/m68k/include/asm/entry_no.h @@ -0,0 +1,182 @@ +#ifndef __M68KNOMMU_ENTRY_H +#define __M68KNOMMU_ENTRY_H + +#include +#include + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - [ sr ] [ format & vector ] + * 2E(sp) - [ pc-hiword ] [ sr ] + * 30(sp) - [ pc-loword ] [ pc-hiword ] + * 32(sp) - [ format & vector ] [ pc-loword ] + * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ + * M68K COLDFIRE + */ + +#define ALLOWINT 0xf8ff + +#ifdef __ASSEMBLY__ + +/* process bits for task_struct.flags */ +PF_TRACESYS_OFF = 3 +PF_TRACESYS_BIT = 5 +PF_PTRACED_OFF = 3 +PF_PTRACED_BIT = 4 +PF_DTRACE_OFF = 1 +PF_DTRACE_BIT = 5 + +LENOSYS = 38 + +#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ + +/* + * This defines the normal kernel pt-regs layout. + * + * regs are a2-a6 and d6-d7 preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ + +#ifdef CONFIG_COLDFIRE +/* + * This is made a little more tricky on the ColdFire. There is no + * separate kernel and user stack pointers. Need to artificially + * construct a usp in software... When doing this we need to disable + * interrupts, otherwise bad things could happen. + */ +.macro SAVE_ALL + move #0x2700,%sr /* disable intrs */ + btst #5,%sp@(2) /* from user? */ + bnes 6f /* no, skip */ + movel %sp,sw_usp /* save user sp */ + addql #8,sw_usp /* remove exception */ + movel sw_ksp,%sp /* kernel sp */ + subql #8,%sp /* room for exception */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + movel sw_usp,%a0 /* get usp */ + movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ + bra 7f + 6: + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + 7: +.endm + +.macro RESTORE_ALL + btst #5,%sp@(PT_SR) /* going user? */ + bnes 8f /* no, skip */ + move #0x2700,%sr /* disable intrs */ + movel sw_usp,%a0 /* get usp */ + movel %sp@(PT_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + addql #8,%sp /* remove exception */ + movel %sp,sw_ksp /* save ksp */ + subql #8,sw_usp /* set exception */ + movel sw_usp,%sp /* restore usp */ + rte + 8: + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +/* + * Quick exception save, use current stack only. + */ +.macro SAVE_LOCAL + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro RESTORE_LOCAL + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro SAVE_SWITCH_STACK + lea %sp@(-24),%sp /* 6 regs */ + moveml %a3-%a6/%d6-%d7,%sp@ +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@,%a3-%a6/%d6-%d7 + lea %sp@(24),%sp /* 6 regs */ +.endm + +/* + * Software copy of the user and kernel stack pointers... Ugh... + * Need these to get around ColdFire not having separate kernel + * and user stack pointers. + */ +.globl sw_usp +.globl sw_ksp + +#else /* !CONFIG_COLDFIRE */ + +/* + * Standard 68k interrupt entry and exit macros. + */ +.macro SAVE_ALL + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro RESTORE_ALL + moveml %sp@+,%a0-%a2/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro SAVE_SWITCH_STACK + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +#endif /* !CONFIG_COLDFIRE */ +#endif /* __ASSEMBLY__ */ +#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h new file mode 100644 index 0000000..0d4e188 --- /dev/null +++ b/arch/m68k/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef _M68K_ERRNO_H +#define _M68K_ERRNO_H + +#include + +#endif /* _M68K_ERRNO_H */ diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h new file mode 100644 index 0000000..97bcaef --- /dev/null +++ b/arch/m68k/include/asm/fb.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "fb_no.h" +#else +#include "fb_mm.h" +#endif diff --git a/arch/m68k/include/asm/fb_mm.h b/arch/m68k/include/asm/fb_mm.h new file mode 100644 index 0000000..380b97a --- /dev/null +++ b/arch/m68k/include/asm/fb_mm.h @@ -0,0 +1,34 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include +#include + +#ifdef CONFIG_SUN3 +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE; +} +#else +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + if (CPU_IS_020_OR_030) + pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030; + if (CPU_IS_040_OR_060) { + pgprot_val(vma->vm_page_prot) &= _CACHEMASK040; + /* Use no-cache mode, serialized */ + pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S; + } +} +#endif /* CONFIG_SUN3 */ + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/m68k/include/asm/fb_no.h b/arch/m68k/include/asm/fb_no.h new file mode 100644 index 0000000..c7df380 --- /dev/null +++ b/arch/m68k/include/asm/fb_no.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h new file mode 100644 index 0000000..b9215a0 --- /dev/null +++ b/arch/m68k/include/asm/fbio.h @@ -0,0 +1,330 @@ +#ifndef __LINUX_FBIO_H +#define __LINUX_FBIO_H + +#include +#include + +/* Constants used for fbio SunOS compatibility */ +/* (C) 1996 Miguel de Icaza */ + +/* Frame buffer types */ +#define FBTYPE_NOTYPE -1 +#define FBTYPE_SUN1BW 0 /* mono */ +#define FBTYPE_SUN1COLOR 1 +#define FBTYPE_SUN2BW 2 +#define FBTYPE_SUN2COLOR 3 +#define FBTYPE_SUN2GP 4 +#define FBTYPE_SUN5COLOR 5 +#define FBTYPE_SUN3COLOR 6 +#define FBTYPE_MEMCOLOR 7 +#define FBTYPE_SUN4COLOR 8 + +#define FBTYPE_NOTSUN1 9 +#define FBTYPE_NOTSUN2 10 +#define FBTYPE_NOTSUN3 11 + +#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ +#define FBTYPE_SUNROP_COLOR 13 +#define FBTYPE_SUNFB_VIDEO 14 +#define FBTYPE_SUNGIFB 15 +#define FBTYPE_SUNGPLAS 16 +#define FBTYPE_SUNGP3 17 +#define FBTYPE_SUNGT 18 +#define FBTYPE_SUNLEO 19 /* zx Leo card */ +#define FBTYPE_MDICOLOR 20 /* cg14 */ +#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ + +#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ + +/* Does not seem to be listed in the Sun file either */ +#define FBTYPE_CREATOR 22 +#define FBTYPE_PCI_IGA1682 23 +#define FBTYPE_P9100COLOR 24 + +#define FBTYPE_PCI_GENERIC 1000 +#define FBTYPE_PCI_MACH64 1001 + +/* fbio ioctls */ +/* Returned by FBIOGTYPE */ +struct fbtype { + int fb_type; /* fb type, see above */ + int fb_height; /* pixels */ + int fb_width; /* pixels */ + int fb_depth; + int fb_cmsize; /* color map entries */ + int fb_size; /* fb size in bytes */ +}; +#define FBIOGTYPE _IOR('F', 0, struct fbtype) + +struct fbcmap { + int index; /* first element (0 origin) */ + int count; + unsigned char __user *red; + unsigned char __user *green; + unsigned char __user *blue; +}; + +#ifdef __KERNEL__ +#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) +#else +#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) +#endif + +/* # of device specific values */ +#define FB_ATTR_NDEVSPECIFIC 8 +/* # of possible emulations */ +#define FB_ATTR_NEMUTYPES 4 + +struct fbsattr { + int flags; + int emu_type; /* -1 if none */ + int dev_specific[FB_ATTR_NDEVSPECIFIC]; +}; + +struct fbgattr { + int real_type; /* real frame buffer type */ + int owner; /* unknown */ + struct fbtype fbtype; /* real frame buffer fbtype */ + struct fbsattr sattr; + int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ +}; +#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ +#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ + +#define FBIOSVIDEO _IOW('F', 7, int) +#define FBIOGVIDEO _IOR('F', 8, int) + +struct fbcursor { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + char __user *image; /* cursor image bits */ + char __user *mask; /* cursor mask bits */ +}; + +/* set/get cursor attributes/shape */ +#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) +#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) + +/* set/get cursor position */ +#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) +#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) + +/* get max cursor size */ +#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) + +/* wid manipulation */ +struct fb_wid_alloc { +#define FB_WID_SHARED_8 0 +#define FB_WID_SHARED_24 1 +#define FB_WID_DBL_8 2 +#define FB_WID_DBL_24 3 + __u32 wa_type; + __s32 wa_index; /* Set on return */ + __u32 wa_count; +}; +struct fb_wid_item { + __u32 wi_type; + __s32 wi_index; + __u32 wi_attrs; + __u32 wi_values[32]; +}; +struct fb_wid_list { + __u32 wl_flags; + __u32 wl_count; + struct fb_wid_item *wl_list; +}; + +#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) +#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) +#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) +#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) + +/* Creator ioctls */ +#define FFB_IOCTL ('F'<<8) +#define FFB_SYS_INFO (FFB_IOCTL|80) +#define FFB_CLUTREAD (FFB_IOCTL|81) +#define FFB_CLUTPOST (FFB_IOCTL|82) +#define FFB_SETDIAGMODE (FFB_IOCTL|83) +#define FFB_GETMONITORID (FFB_IOCTL|84) +#define FFB_GETVIDEOMODE (FFB_IOCTL|85) +#define FFB_SETVIDEOMODE (FFB_IOCTL|86) +#define FFB_SETSERVER (FFB_IOCTL|87) +#define FFB_SETOVCTL (FFB_IOCTL|88) +#define FFB_GETOVCTL (FFB_IOCTL|89) +#define FFB_GETSAXNUM (FFB_IOCTL|90) +#define FFB_FBDEBUG (FFB_IOCTL|91) + +/* Cg14 ioctls */ +#define MDI_IOCTL ('M'<<8) +#define MDI_RESET (MDI_IOCTL|1) +#define MDI_GET_CFGINFO (MDI_IOCTL|2) +#define MDI_SET_PIXELMODE (MDI_IOCTL|3) +# define MDI_32_PIX 32 +# define MDI_16_PIX 16 +# define MDI_8_PIX 8 + +struct mdi_cfginfo { + int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ + int mdi_type; /* FBTYPE name */ + int mdi_height; /* height */ + int mdi_width; /* widht */ + int mdi_size; /* available ram */ + int mdi_mode; /* 8bpp, 16bpp or 32bpp */ + int mdi_pixfreq; /* pixel clock (from PROM) */ +}; + +/* SparcLinux specific ioctl for the MDI, should be replaced for + * the SET_XLUT/SET_CLUTn ioctls instead + */ +#define MDI_CLEAR_XLUT (MDI_IOCTL|9) + +/* leo & ffb ioctls */ +struct fb_clut_alloc { + __u32 clutid; /* Set on return */ + __u32 flag; + __u32 index; +}; + +struct fb_clut { +#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + char * red; + char * green; + char * blue; +}; + +struct fb_clut32 { + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + __u32 red; + __u32 green; + __u32 blue; +}; + +#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) +#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) +#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) +#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) +#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ +#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ + +#ifdef __KERNEL__ +/* Addresses on the fd of a cgsix that are mappable */ +#define CG6_FBC 0x70000000 +#define CG6_TEC 0x70001000 +#define CG6_BTREGS 0x70002000 +#define CG6_FHC 0x70004000 +#define CG6_THC 0x70005000 +#define CG6_ROM 0x70006000 +#define CG6_RAM 0x70016000 +#define CG6_DHC 0x80000000 + +#define CG3_MMAP_OFFSET 0x4000000 + +/* Addresses on the fd of a tcx that are mappable */ +#define TCX_RAM8BIT 0x00000000 +#define TCX_RAM24BIT 0x01000000 +#define TCX_UNK3 0x10000000 +#define TCX_UNK4 0x20000000 +#define TCX_CONTROLPLANE 0x28000000 +#define TCX_UNK6 0x30000000 +#define TCX_UNK7 0x38000000 +#define TCX_TEC 0x70000000 +#define TCX_BTREGS 0x70002000 +#define TCX_THC 0x70004000 +#define TCX_DHC 0x70008000 +#define TCX_ALT 0x7000a000 +#define TCX_SYNC 0x7000e000 +#define TCX_UNK2 0x70010000 + +/* CG14 definitions */ + +/* Offsets into the OBIO space: */ +#define CG14_REGS 0 /* registers */ +#define CG14_CURSORREGS 0x1000 /* cursor registers */ +#define CG14_DACREGS 0x2000 /* DAC registers */ +#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ +#define CG14_CLUT1 0x4000 /* Color Look Up Table */ +#define CG14_CLUT2 0x5000 /* Color Look Up Table */ +#define CG14_CLUT3 0x6000 /* Color Look Up Table */ +#define CG14_AUTO 0xf000 + +#endif /* KERNEL */ + +/* These are exported to userland for applications to use */ +/* Mappable offsets for the cg14: control registers */ +#define MDI_DIRECT_MAP 0x10000000 +#define MDI_CTLREG_MAP 0x20000000 +#define MDI_CURSOR_MAP 0x30000000 +#define MDI_SHDW_VRT_MAP 0x40000000 + +/* Mappable offsets for the cg14: frame buffer resolutions */ +/* 32 bits */ +#define MDI_CHUNKY_XBGR_MAP 0x50000000 +#define MDI_CHUNKY_BGR_MAP 0x60000000 + +/* 16 bits */ +#define MDI_PLANAR_X16_MAP 0x70000000 +#define MDI_PLANAR_C16_MAP 0x80000000 + +/* 8 bit is done as CG3 MMAP offset */ +/* 32 bits, planar */ +#define MDI_PLANAR_X32_MAP 0x90000000 +#define MDI_PLANAR_B32_MAP 0xa0000000 +#define MDI_PLANAR_G32_MAP 0xb0000000 +#define MDI_PLANAR_R32_MAP 0xc0000000 + +/* Mappable offsets on leo */ +#define LEO_SS0_MAP 0x00000000 +#define LEO_LC_SS0_USR_MAP 0x00800000 +#define LEO_LD_SS0_MAP 0x00801000 +#define LEO_LX_CURSOR_MAP 0x00802000 +#define LEO_SS1_MAP 0x00803000 +#define LEO_LC_SS1_USR_MAP 0x01003000 +#define LEO_LD_SS1_MAP 0x01004000 +#define LEO_UNK_MAP 0x01005000 +#define LEO_LX_KRN_MAP 0x01006000 +#define LEO_LC_SS0_KRN_MAP 0x01007000 +#define LEO_LC_SS1_KRN_MAP 0x01008000 +#define LEO_LD_GBL_MAP 0x01009000 +#define LEO_UNK2_MAP 0x0100a000 + +#ifdef __KERNEL__ +struct fbcmap32 { + int index; /* first element (0 origin) */ + int count; + u32 red; + u32 green; + u32 blue; +}; + +#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) +#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) + +struct fbcursor32 { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap32 cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + u32 image; /* cursor image bits */ + u32 mask; /* cursor mask bits */ +}; + +#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) +#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) +#endif + +#endif /* __LINUX_FBIO_H */ diff --git a/arch/m68k/include/asm/fcntl.h b/arch/m68k/include/asm/fcntl.h new file mode 100644 index 0000000..1c369b2 --- /dev/null +++ b/arch/m68k/include/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _M68K_FCNTL_H +#define _M68K_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include + +#endif /* _M68K_FCNTL_H */ diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h new file mode 100644 index 0000000..814b517 --- /dev/null +++ b/arch/m68k/include/asm/flat.h @@ -0,0 +1,17 @@ +/* + * include/asm-m68knommu/flat.h -- uClinux flat-format executables + */ + +#ifndef __M68KNOMMU_FLAT_H__ +#define __M68KNOMMU_FLAT_H__ + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 + +#endif /* __M68KNOMMU_FLAT_H__ */ diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h new file mode 100644 index 0000000..697d503 --- /dev/null +++ b/arch/m68k/include/asm/floppy.h @@ -0,0 +1,254 @@ +/* + * Implementation independent bits of the Floppy driver. + * + * much of this file is derived from what was originally the Q40 floppy driver. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 2001 + * + * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net) + * + */ + +#include + +#include + +asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id); + +/* constants... */ + +#undef MAX_DMA_ADDRESS +#define MAX_DMA_ADDRESS 0x00 /* nothing like that */ + + +/* + * Again, the CMOS information doesn't work on m68k.. + */ +#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4) +#define FLOPPY1_TYPE 0 + +/* basically PC init + set use_virtual_dma */ +#define FDC1 m68k_floppy_init() + +#define N_FDC 1 +#define N_DRIVE 8 + + +/* vdma globals adapted from asm-i386/floppy.h */ + +static int virtual_dma_count=0; +static int virtual_dma_residue=0; +static char *virtual_dma_addr=NULL; +static int virtual_dma_mode=0; +static int doing_pdma=0; + +#include + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + + +static __inline__ unsigned char fd_inb(int port) +{ + if(MACH_IS_Q40) + return inb_p(port); + else if(MACH_IS_SUN3X) + return sun3x_82072_fd_inb(port); + return 0; +} + +static __inline__ void fd_outb(unsigned char value, int port) +{ + if(MACH_IS_Q40) + outb_p(value, port); + else if(MACH_IS_SUN3X) + sun3x_82072_fd_outb(value, port); +} + + +static int fd_request_irq(void) +{ + if(MACH_IS_Q40) + return request_irq(FLOPPY_IRQ, floppy_hardint, + IRQF_DISABLED, "floppy", floppy_hardint); + else if(MACH_IS_SUN3X) + return sun3xflop_request_irq(); + return -ENXIO; +} + +static void fd_free_irq(void) +{ + if(MACH_IS_Q40) + free_irq(FLOPPY_IRQ, floppy_hardint); +} + +#define fd_request_dma() vdma_request_dma(FLOPPY_DMA,"floppy") +#define fd_get_dma_residue() vdma_get_dma_residue(FLOPPY_DMA) +#define fd_dma_mem_alloc(size) vdma_mem_alloc(size) +#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io) + +#define fd_enable_irq() /* nothing... */ +#define fd_disable_irq() /* nothing... */ + +#define fd_free_dma() /* nothing */ + +/* No 64k boundary crossing problems on Q40 - no DMA at all */ +#define CROSS_64KB(a,s) (0) + +#define DMA_MODE_READ 0x44 /* i386 look-alike */ +#define DMA_MODE_WRITE 0x48 + + +static int m68k_floppy_init(void) +{ + use_virtual_dma =1; + can_use_virtual_dma = 1; + + + if (MACH_IS_Q40) + return 0x3f0; + else if(MACH_IS_SUN3X) + return sun3xflop_init(); + else + return -1; +} + + +static int vdma_request_dma(unsigned int dmanr, const char * device_id) +{ + return 0; +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static unsigned long vdma_mem_alloc(unsigned long size) +{ + return (unsigned long) vmalloc(size); + +} + +static void _fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + vfree((void *)addr); +} +#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size) + + +/* choose_dma_mode ???*/ + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_pdma = 1; + virtual_dma_port = (MACH_IS_Q40 ? io : 0); + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + + + +static void fd_disable_dma(void) +{ + doing_pdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + + + +/* this is the only truly Q40 specific function */ + +asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + register unsigned char st; + +#undef TRACE_FLPY_INT +#define NO_FLOPPY_ASSEMBLER + +#ifdef TRACE_FLPY_INT + static int calls=0; + static int bytes=0; + static int dma_wait=0; +#endif + if(!doing_pdma) { + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + +#ifdef TRACE_FLPY_INT + if(!calls) + bytes = virtual_dma_count; +#endif + + { + register int lcount; + register char *lptr; + + /* serve 1st byte fast: */ + + st=1; + for(lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if(st != 0xa0) + break; + if(virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + } + +#ifdef TRACE_FLPY_INT + calls++; +#endif + if(st == 0x20) + return IRQ_HANDLED; + if(!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +#ifdef TRACE_FLPY_INT + printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", + virtual_dma_count, virtual_dma_residue, calls, bytes, + dma_wait); + calls = 0; + dma_wait=0; +#endif + doing_pdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } +#ifdef TRACE_FLPY_INT + if(!virtual_dma_count) + dma_wait++; +#endif + return IRQ_HANDLED; +} + +#define EXTRA_FLOPPY_PARAMS diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h new file mode 100644 index 0000000..e19bc5e --- /dev/null +++ b/arch/m68k/include/asm/fpu.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "fpu_no.h" +#else +#include "fpu_mm.h" +#endif diff --git a/arch/m68k/include/asm/fpu_mm.h b/arch/m68k/include/asm/fpu_mm.h new file mode 100644 index 0000000..ffb6b8c --- /dev/null +++ b/arch/m68k/include/asm/fpu_mm.h @@ -0,0 +1,21 @@ +#ifndef __M68K_FPU_H +#define __M68K_FPU_H + + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ + +#if defined(CONFIG_M68020) || defined(CONFIG_M68030) +#define FPSTATESIZE (216) +#elif defined(CONFIG_M68040) +#define FPSTATESIZE (96) +#elif defined(CONFIG_M68KFPU_EMU) +#define FPSTATESIZE (28) +#elif defined(CONFIG_M68060) +#define FPSTATESIZE (12) +#else +#define FPSTATESIZE (0) +#endif + +#endif /* __M68K_FPU_H */ diff --git a/arch/m68k/include/asm/fpu_no.h b/arch/m68k/include/asm/fpu_no.h new file mode 100644 index 0000000..b16b2e4 --- /dev/null +++ b/arch/m68k/include/asm/fpu_no.h @@ -0,0 +1,21 @@ +#ifndef __M68KNOMMU_FPU_H +#define __M68KNOMMU_FPU_H + + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ +#if defined(CONFIG_M68020) || defined(CONFIG_M68030) +#define FPSTATESIZE (216/sizeof(unsigned char)) +#elif defined(CONFIG_M68040) +#define FPSTATESIZE (96/sizeof(unsigned char)) +#elif defined(CONFIG_M68KFPU_EMU) +#define FPSTATESIZE (28/sizeof(unsigned char)) +#elif defined(CONFIG_M68060) +#define FPSTATESIZE (12/sizeof(unsigned char)) +#else +/* Assume no FP unit present then... */ +#define FPSTATESIZE (2) /* dummy size */ +#endif + +#endif /* __M68K_FPU_H */ diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h new file mode 100644 index 0000000..6a332a9 --- /dev/null +++ b/arch/m68k/include/asm/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h new file mode 100644 index 0000000..56d0d5d --- /dev/null +++ b/arch/m68k/include/asm/hardirq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "hardirq_no.h" +#else +#include "hardirq_mm.h" +#endif diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h new file mode 100644 index 0000000..394ee94 --- /dev/null +++ b/arch/m68k/include/asm/hardirq_mm.h @@ -0,0 +1,16 @@ +#ifndef __M68K_HARDIRQ_H +#define __M68K_HARDIRQ_H + +#include +#include + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +#endif diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h new file mode 100644 index 0000000..bfad281 --- /dev/null +++ b/arch/m68k/include/asm/hardirq_no.h @@ -0,0 +1,27 @@ +#ifndef __M68K_HARDIRQ_H +#define __M68K_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +void ack_bad_irq(unsigned int irq); + +#endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68k/include/asm/hp300hw.h b/arch/m68k/include/asm/hp300hw.h new file mode 100644 index 0000000..d998ea6 --- /dev/null +++ b/arch/m68k/include/asm/hp300hw.h @@ -0,0 +1,25 @@ +#ifndef _M68K_HP300HW_H +#define _M68K_HP300HW_H + +extern unsigned long hp300_model; + +/* This information was taken from NetBSD */ +#define HP_320 (0) /* 16MHz 68020+HP MMU+16K external cache */ +#define HP_330 (1) /* 16MHz 68020+68851 MMU */ +#define HP_340 (2) /* 16MHz 68030 */ +#define HP_345 (3) /* 50MHz 68030+32K external cache */ +#define HP_350 (4) /* 25MHz 68020+HP MMU+32K external cache */ +#define HP_360 (5) /* 25MHz 68030 */ +#define HP_370 (6) /* 33MHz 68030+64K external cache */ +#define HP_375 (7) /* 50MHz 68030+32K external cache */ +#define HP_380 (8) /* 25MHz 68040 */ +#define HP_385 (9) /* 33MHz 68040 */ + +#define HP_400 (10) /* 50MHz 68030+32K external cache */ +#define HP_425T (11) /* 25MHz 68040 - model 425t */ +#define HP_425S (12) /* 25MHz 68040 - model 425s */ +#define HP_425E (13) /* 25MHz 68040 - model 425e */ +#define HP_433T (14) /* 33MHz 68040 - model 433t */ +#define HP_433S (15) /* 33MHz 68040 - model 433s */ + +#endif /* _M68K_HP300HW_H */ diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h new file mode 100644 index 0000000..e195260 --- /dev/null +++ b/arch/m68k/include/asm/hw_irq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "hw_irq_no.h" +#else +#include "hw_irq_mm.h" +#endif diff --git a/arch/m68k/include/asm/hw_irq_mm.h b/arch/m68k/include/asm/hw_irq_mm.h new file mode 100644 index 0000000..eacef09 --- /dev/null +++ b/arch/m68k/include/asm/hw_irq_mm.h @@ -0,0 +1,6 @@ +#ifndef __ASM_M68K_HW_IRQ_H +#define __ASM_M68K_HW_IRQ_H + +/* Dummy include. */ + +#endif diff --git a/arch/m68k/include/asm/hw_irq_no.h b/arch/m68k/include/asm/hw_irq_no.h new file mode 100644 index 0000000..f3ec9e5 --- /dev/null +++ b/arch/m68k/include/asm/hw_irq_no.h @@ -0,0 +1,4 @@ +#ifndef __M68KNOMMU_HW_IRQ_H__ +#define __M68KNOMMU_HW_IRQ_H__ + +#endif /* __M68KNOMMU_HW_IRQ_H__ */ diff --git a/arch/m68k/include/asm/hwtest.h b/arch/m68k/include/asm/hwtest.h new file mode 100644 index 0000000..402c8a4 --- /dev/null +++ b/arch/m68k/include/asm/hwtest.h @@ -0,0 +1,15 @@ +/* Routines to test for presence/absence of hardware registers: + * see arch/m68k/mm/hwtest.c. + * -- PMM 05/1998 + * + * Removed __init from decls. We might want them in modules, and + * the code is tiny anyway. 16/5/98 pb + */ + +#ifndef __ASM_HWTEST_H +#define __ASM_HWTEST_H + +extern int hwreg_present(volatile void *regp); +extern int hwreg_write(volatile void *regp, unsigned short val); + +#endif diff --git a/arch/m68k/include/asm/ide.h b/arch/m68k/include/asm/ide.h new file mode 100644 index 0000000..b996a3c --- /dev/null +++ b/arch/m68k/include/asm/ide.h @@ -0,0 +1,130 @@ +/* + * linux/include/asm-m68k/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +/* Copyright(c) 1996 Kars de Jong */ +/* Based on the ide driver from 1.2.13pl8 */ + +/* + * Credits (alphabetical): + * + * - Bjoern Brauel + * - Kars de Jong + * - Torsten Ebeling + * - Dwight Engen + * - Thorsten Floeck + * - Roman Hodek + * - Guenther Kelleter + * - Chris Lawrence + * - Michael Rausch + * - Christian Sauer + * - Michael Schmitz + * - Jes Soerensen + * - Michael Thurm + * - Geert Uytterhoeven + */ + +#ifndef _M68K_IDE_H +#define _M68K_IDE_H + +#ifdef __KERNEL__ + + +#include +#include +#include + +#ifdef CONFIG_ATARI +#include +#include +#endif + +#ifdef CONFIG_MAC +#include +#endif + +/* + * Get rid of defs from io.h - ide has its private and conflicting versions + * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we + * always use the `raw' MMIO versions + */ +#undef inb +#undef inw +#undef insw +#undef inl +#undef insl +#undef outb +#undef outw +#undef outsw +#undef outl +#undef outsl +#undef readb +#undef readw +#undef readl +#undef writeb +#undef writew +#undef writel + +#define inb in_8 +#define inw in_be16 +#define insw(port, addr, n) raw_insw((u16 *)port, addr, n) +#define inl in_be32 +#define insl(port, addr, n) raw_insl((u32 *)port, addr, n) +#define outb(val, port) out_8(port, val) +#define outw(val, port) out_be16(port, val) +#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) +#define outl(val, port) out_be32(port, val) +#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) +#define readb in_8 +#define readw in_be16 +#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n) +#define readl in_be32 +#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n) +#define writeb(val, port) out_8(port, val) +#define writew(val, port) out_be16(port, val) +#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) +#define writel(val, port) out_be32(port, val) +#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) +#if defined(CONFIG_ATARI) || defined(CONFIG_Q40) +#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n) +#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n) +#endif + +#ifdef CONFIG_BLK_DEV_FALCON_IDE +#define IDE_ARCH_LOCK + +extern int falconide_intr_lock; + +static __inline__ void ide_release_lock (void) +{ + if (MACH_IS_ATARI) { + if (falconide_intr_lock == 0) { + printk("ide_release_lock: bug\n"); + return; + } + falconide_intr_lock = 0; + stdma_release(); + } +} + +static __inline__ void +ide_get_lock(irq_handler_t handler, void *data) +{ + if (MACH_IS_ATARI) { + if (falconide_intr_lock == 0) { + if (in_interrupt() > 0) + panic( "Falcon IDE hasn't ST-DMA lock in interrupt" ); + stdma_lock(handler, data); + falconide_intr_lock = 1; + } + } +} +#endif /* CONFIG_BLK_DEV_FALCON_IDE */ + +#define IDE_ARCH_ACK_INTR +#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) + +#endif /* __KERNEL__ */ +#endif /* _M68K_IDE_H */ diff --git a/arch/m68k/include/asm/idprom.h b/arch/m68k/include/asm/idprom.h new file mode 100644 index 0000000..160616a --- /dev/null +++ b/arch/m68k/include/asm/idprom.h @@ -0,0 +1,27 @@ +#ifndef _M68K_IDPROM_H +#define _M68K_IDPROM_H +/* + * idprom.h: Macros and defines for idprom routines + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#include + +struct idprom { + u8 id_format; /* Format identifier (always 0x01) */ + u8 id_machtype; /* Machine type */ + u8 id_ethaddr[6]; /* Hardware ethernet address */ + s32 id_date; /* Date of manufacture */ + u32 id_sernum:24; /* Unique serial number */ + u8 id_cksum; /* Checksum - xor of the data bytes */ + u8 reserved[16]; +}; + +extern struct idprom *idprom; +extern void idprom_init(void); + +/* Sun3: in control space */ +#define SUN3_IDPROM_BASE 0x00000000 + +#endif /* !(_M68K_IDPROM_H) */ diff --git a/arch/m68k/include/asm/intersil.h b/arch/m68k/include/asm/intersil.h new file mode 100644 index 0000000..f482902 --- /dev/null +++ b/arch/m68k/include/asm/intersil.h @@ -0,0 +1,48 @@ +#ifndef _SUN3_INTERSIL_H +#define _SUN3_INTERSIL_H +/* bits 0 and 1 */ +#define INTERSIL_FREQ_32K 0x00 +#define INTERSIL_FREQ_1M 0x01 +#define INTERSIL_FREQ_2M 0x02 +#define INTERSIL_FREQ_4M 0x03 + +/* bit 2 */ +#define INTERSIL_12H_MODE 0x00 +#define INTERSIL_24H_MODE 0x04 + +/* bit 3 */ +#define INTERSIL_STOP 0x00 +#define INTERSIL_RUN 0x08 + +/* bit 4 */ +#define INTERSIL_INT_ENABLE 0x10 +#define INTERSIL_INT_DISABLE 0x00 + +/* bit 5 */ +#define INTERSIL_MODE_NORMAL 0x00 +#define INTERSIL_MODE_TEST 0x20 + +#define INTERSIL_HZ_100_MASK 0x02 + +struct intersil_dt { + unsigned char csec; + unsigned char hour; + unsigned char minute; + unsigned char second; + unsigned char month; + unsigned char day; + unsigned char year; + unsigned char weekday; +}; + +struct intersil_7170 { + struct intersil_dt counter; + struct intersil_dt alarm; + unsigned char int_reg; + unsigned char cmd_reg; +}; + +extern volatile char* clock_va; +#define intersil_clock ((volatile struct intersil_7170 *) clock_va) +#define intersil_clear() (void)intersil_clock->int_reg +#endif diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h new file mode 100644 index 0000000..c7210ba --- /dev/null +++ b/arch/m68k/include/asm/io.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "io_no.h" +#else +#include "io_mm.h" +#endif diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h new file mode 100644 index 0000000..9e673e3 --- /dev/null +++ b/arch/m68k/include/asm/io_mm.h @@ -0,0 +1,369 @@ +/* + * linux/include/asm-m68k/io.h + * + * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other + * IO access + * - added Q40 support + * - added skeleton for GG-II and Amiga PCMCIA + * 2/3/01 RZ: - moved a few more defs into raw_io.h + * + * inX/outX should not be used by any driver unless it does + * ISA access. Other drivers should use function defined in raw_io.h + * or define its own macros on top of these. + * + * inX(),outX() are for ISA I/O + * isa_readX(),isa_writeX() are for ISA memory + */ + +#ifndef _IO_H +#define _IO_H + +#ifdef __KERNEL__ + +#include +#include +#include + +#include + +#ifdef CONFIG_ATARI +#include +#endif + + +/* + * IO/MEM definitions for various ISA bridges + */ + + +#ifdef CONFIG_Q40 + +#define q40_isa_io_base 0xff400000 +#define q40_isa_mem_base 0xff800000 + +#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr))) +#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+ 4*((unsigned long)(ioaddr))) +#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr))) +#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr))) + +#define MULTI_ISA 0 +#endif /* Q40 */ + +/* GG-II Zorro to ISA bridge */ +#ifdef CONFIG_GG2 + +extern unsigned long gg2_isa_base; +#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4)) +#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+ ((unsigned long)(ioaddr)*4)) +#define GG2_ISA_MEM_B(madr) (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff)) +#define GG2_ISA_MEM_W(madr) (gg2_isa_base+ (((unsigned long)(madr)*4) & 0xfffff)) + +#ifndef MULTI_ISA +#define MULTI_ISA 0 +#else +#undef MULTI_ISA +#define MULTI_ISA 1 +#endif +#endif /* GG2 */ + +#ifdef CONFIG_AMIGA_PCMCIA +#include + +#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) ) +#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) ) + +#ifndef MULTI_ISA +#define MULTI_ISA 0 +#else +#undef MULTI_ISA +#define MULTI_ISA 1 +#endif +#endif /* AMIGA_PCMCIA */ + + + +#ifdef CONFIG_ISA + +#if MULTI_ISA == 0 +#undef MULTI_ISA +#endif + +#define ISA_TYPE_Q40 (1) +#define ISA_TYPE_GG2 (2) +#define ISA_TYPE_AG (3) + +#if defined(CONFIG_Q40) && !defined(MULTI_ISA) +#define ISA_TYPE ISA_TYPE_Q40 +#define ISA_SEX 0 +#endif +#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA) +#define ISA_TYPE ISA_TYPE_AG +#define ISA_SEX 1 +#endif +#if defined(CONFIG_GG2) && !defined(MULTI_ISA) +#define ISA_TYPE ISA_TYPE_GG2 +#define ISA_SEX 0 +#endif + +#ifdef MULTI_ISA +extern int isa_type; +extern int isa_sex; + +#define ISA_TYPE isa_type +#define ISA_SEX isa_sex +#endif + +/* + * define inline addr translation functions. Normally only one variant will + * be compiled in so the case statement will be optimised away + */ + +static inline u8 __iomem *isa_itb(unsigned long addr) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_Q40 + case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr); +#endif +#ifdef CONFIG_GG2 + case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr); +#endif +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr); +#endif + default: return NULL; /* avoid warnings, just in case */ + } +} +static inline u16 __iomem *isa_itw(unsigned long addr) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_Q40 + case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr); +#endif +#ifdef CONFIG_GG2 + case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr); +#endif +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr); +#endif + default: return NULL; /* avoid warnings, just in case */ + } +} +static inline u32 __iomem *isa_itl(unsigned long addr) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr); +#endif + default: return 0; /* avoid warnings, just in case */ + } +} +static inline u8 __iomem *isa_mtb(unsigned long addr) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_Q40 + case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr); +#endif +#ifdef CONFIG_GG2 + case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr); +#endif +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: return (u8 __iomem *)addr; +#endif + default: return NULL; /* avoid warnings, just in case */ + } +} +static inline u16 __iomem *isa_mtw(unsigned long addr) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_Q40 + case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr); +#endif +#ifdef CONFIG_GG2 + case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr); +#endif +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: return (u16 __iomem *)addr; +#endif + default: return NULL; /* avoid warnings, just in case */ + } +} + + +#define isa_inb(port) in_8(isa_itb(port)) +#define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port))) +#define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port))) +#define isa_outb(val,port) out_8(isa_itb(port),(val)) +#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val))) +#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val))) + +#define isa_readb(p) in_8(isa_mtb((unsigned long)(p))) +#define isa_readw(p) \ + (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \ + : in_le16(isa_mtw((unsigned long)(p)))) +#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val)) +#define isa_writew(val,p) \ + (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ + : out_le16(isa_mtw((unsigned long)(p)),(val))) + +static inline void isa_delay(void) +{ + switch(ISA_TYPE) + { +#ifdef CONFIG_Q40 + case ISA_TYPE_Q40: isa_outb(0,0x80); break; +#endif +#ifdef CONFIG_GG2 + case ISA_TYPE_GG2: break; +#endif +#ifdef CONFIG_AMIGA_PCMCIA + case ISA_TYPE_AG: break; +#endif + default: break; /* avoid warnings */ + } +} + +#define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;}) +#define isa_outb_p(v,p) ({isa_outb((v),(p));isa_delay();}) +#define isa_inw_p(p) ({u16 v=isa_inw(p);isa_delay();v;}) +#define isa_outw_p(v,p) ({isa_outw((v),(p));isa_delay();}) +#define isa_inl_p(p) ({u32 v=isa_inl(p);isa_delay();v;}) +#define isa_outl_p(v,p) ({isa_outl((v),(p));isa_delay();}) + +#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr)) +#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr)) + +#define isa_insw(port, buf, nr) \ + (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) : \ + raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr))) + +#define isa_outsw(port, buf, nr) \ + (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \ + raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr))) + +#define isa_insl(port, buf, nr) \ + (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) : \ + raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) + +#define isa_outsl(port, buf, nr) \ + (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \ + raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) + + +#define inb isa_inb +#define inb_p isa_inb_p +#define outb isa_outb +#define outb_p isa_outb_p +#define inw isa_inw +#define inw_p isa_inw_p +#define outw isa_outw +#define outw_p isa_outw_p +#define inl isa_inl +#define inl_p isa_inl_p +#define outl isa_outl +#define outl_p isa_outl_p +#define insb isa_insb +#define insw isa_insw +#define insl isa_insl +#define outsb isa_outsb +#define outsw isa_outsw +#define outsl isa_outsl +#define readb isa_readb +#define readw isa_readw +#define writeb isa_writeb +#define writew isa_writew + +#else /* CONFIG_ISA */ + +/* + * We need to define dummy functions for GENERIC_IOMAP support. + */ +#define inb(port) 0xff +#define inb_p(port) 0xff +#define outb(val,port) ((void)0) +#define outb_p(val,port) ((void)0) +#define inw(port) 0xffff +#define outw(val,port) ((void)0) +#define inl(port) 0xffffffffUL +#define outl(val,port) ((void)0) + +#define insb(port,buf,nr) ((void)0) +#define outsb(port,buf,nr) ((void)0) +#define insw(port,buf,nr) ((void)0) +#define outsw(port,buf,nr) ((void)0) +#define insl(port,buf,nr) ((void)0) +#define outsl(port,buf,nr) ((void)0) + +/* + * These should be valid on any ioremap()ed region + */ +#define readb(addr) in_8(addr) +#define writeb(val,addr) out_8((addr),(val)) +#define readw(addr) in_le16(addr) +#define writew(val,addr) out_le16((addr),(val)) + +#endif /* CONFIG_ISA */ + +#define readl(addr) in_le32(addr) +#define writel(val,addr) out_le32((addr),(val)) + +#define mmiowb() + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void __iomem *ioremap_writethrough(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void __iomem *ioremap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + __builtin_memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + __builtin_memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + __builtin_memcpy((void __force *) dst, src, count); +} + +#ifndef CONFIG_SUN3 +#define IO_SPACE_LIMIT 0xffff +#else +#define IO_SPACE_LIMIT 0x0fffffff +#endif + +#endif /* __KERNEL__ */ + +#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* _IO_H */ diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h new file mode 100644 index 0000000..6adef1e --- /dev/null +++ b/arch/m68k/include/asm/io_no.h @@ -0,0 +1,194 @@ +#ifndef _M68KNOMMU_IO_H +#define _M68KNOMMU_IO_H + +#ifdef __KERNEL__ + + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesireable for some devices. + */ + +/* + * swap functions are sometimes needed to interface little-endian hardware + */ +static inline unsigned short _swapw(volatile unsigned short v) +{ + return ((v << 8) | (v >> 8)); +} + +static inline unsigned int _swapl(volatile unsigned long v) +{ + return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); +} + +#define readb(addr) \ + ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) +#define readw(addr) \ + ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) +#define readl(addr) \ + ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) + +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +static inline void io_outsb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *ap = *bp++; +} + +static inline void io_outsw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *ap = _swapw(*bp++); +} + +static inline void io_outsl(unsigned int addr, void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *ap = _swapl(*bp++); +} + +static inline void io_insb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *bp++ = *ap; +} + +static inline void io_insw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *bp++ = _swapw(*ap); +} + +static inline void io_insl(unsigned int addr, void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *bp++ = _swapl(*ap); +} + +#define mmiowb() + +/* + * make the short names macros so specific devices + * can override them as required + */ + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) io_outsl(a,b,l) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) io_insl(a,b,l) + +#define IO_SPACE_LIMIT 0xffff + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +static inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +/* + * Macros used for converting between virtual and physical mappings. + */ +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _M68KNOMMU_IO_H */ diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/m68k/include/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h new file mode 100644 index 0000000..b8d2f4b --- /dev/null +++ b/arch/m68k/include/asm/ioctls.h @@ -0,0 +1,84 @@ +#ifndef __ARCH_M68K_IOCTLS_H__ +#define __ARCH_M68K_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h new file mode 100644 index 0000000..a623ea3 --- /dev/null +++ b/arch/m68k/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __m68k_IPCBUF_H__ +#define __m68k_IPCBUF_H__ + +/* + * The user_ipc_perm structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __m68k_IPCBUF_H__ */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h new file mode 100644 index 0000000..d031416 --- /dev/null +++ b/arch/m68k/include/asm/irq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "irq_no.h" +#else +#include "irq_mm.h" +#endif diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h new file mode 100644 index 0000000..226bfc0 --- /dev/null +++ b/arch/m68k/include/asm/irq_mm.h @@ -0,0 +1,125 @@ +#ifndef _M68K_IRQ_H_ +#define _M68K_IRQ_H_ + +#include +#include +#include + +/* + * This should be the same as the max(NUM_X_SOURCES) for all the + * different m68k hosts compiled into the kernel. + * Currently the Atari has 72 and the Amiga 24, but if both are + * supported in the kernel it is better to make room for 72. + */ +#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) +#define NR_IRQS 200 +#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) +#define NR_IRQS 72 +#elif defined(CONFIG_Q40) +#define NR_IRQS 43 +#elif defined(CONFIG_AMIGA) +#define NR_IRQS 32 +#elif defined(CONFIG_APOLLO) +#define NR_IRQS 24 +#elif defined(CONFIG_HP300) +#define NR_IRQS 8 +#else +#define NR_IRQS 0 +#endif + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +/* + * Interrupt source definitions + * General interrupt sources are the level 1-7. + * Adding an interrupt service routine for one of these sources + * results in the addition of that routine to a chain of routines. + * Each one is called in succession. Each individual interrupt + * service routine should determine if the device associated with + * that routine requires service. + */ + +#define IRQ_SPURIOUS 0 + +#define IRQ_AUTO_1 1 /* level 1 interrupt */ +#define IRQ_AUTO_2 2 /* level 2 interrupt */ +#define IRQ_AUTO_3 3 /* level 3 interrupt */ +#define IRQ_AUTO_4 4 /* level 4 interrupt */ +#define IRQ_AUTO_5 5 /* level 5 interrupt */ +#define IRQ_AUTO_6 6 /* level 6 interrupt */ +#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ + +#define IRQ_USER 8 + +extern unsigned int irq_canonicalize(unsigned int irq); + +struct pt_regs; + +/* + * various flags for request_irq() - the Amiga now uses the standard + * mechanism like all other architectures - IRQF_DISABLED and + * IRQF_SHARED are your friends. + */ +#ifndef MACH_AMIGA_ONLY +#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ +#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ +#define IRQ_FLG_FAST (0x0004) +#define IRQ_FLG_SLOW (0x0008) +#define IRQ_FLG_STD (0x8000) /* internally used */ +#endif + +/* + * This structure is used to chain together the ISRs for a particular + * interrupt source (if it supports chaining). + */ +typedef struct irq_node { + int (*handler)(int, void *); + void *dev_id; + struct irq_node *next; + unsigned long flags; + const char *devname; +} irq_node_t; + +/* + * This structure has only 4 elements for speed reasons + */ +struct irq_handler { + int (*handler)(int, void *); + unsigned long flags; + void *dev_id; + const char *devname; +}; + +struct irq_controller { + const char *name; + spinlock_t lock; + int (*startup)(unsigned int irq); + void (*shutdown)(unsigned int irq); + void (*enable)(unsigned int irq); + void (*disable)(unsigned int irq); +}; + +extern int m68k_irq_startup(unsigned int); +extern void m68k_irq_shutdown(unsigned int); + +/* + * This function returns a new irq_node_t + */ +extern irq_node_t *new_irq_node(void); + +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); + +asmlinkage void m68k_handle_int(unsigned int); +asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); + +#endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h new file mode 100644 index 0000000..9373c31 --- /dev/null +++ b/arch/m68k/include/asm/irq_no.h @@ -0,0 +1,26 @@ +#ifndef _M68KNOMMU_IRQ_H_ +#define _M68KNOMMU_IRQ_H_ + +#ifdef CONFIG_COLDFIRE +/* + * On the ColdFire we keep track of all vectors. That way drivers + * can register whatever vector number they wish, and we can deal + * with it. + */ +#define SYS_IRQS 256 +#define NR_IRQS SYS_IRQS + +#else + +/* + * # of m68k interrupts + */ +#define SYS_IRQS 8 +#define NR_IRQS (24 + SYS_IRQS) + +#endif /* CONFIG_COLDFIRE */ + + +#define irq_canonicalize(irq) (irq) + +#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h new file mode 100644 index 0000000..3dd9c0b --- /dev/null +++ b/arch/m68k/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h new file mode 100644 index 0000000..6ece1b0 --- /dev/null +++ b/arch/m68k/include/asm/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h new file mode 100644 index 0000000..045d9fd --- /dev/null +++ b/arch/m68k/include/asm/kmap_types.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "kmap_types_no.h" +#else +#include "kmap_types_mm.h" +#endif diff --git a/arch/m68k/include/asm/kmap_types_mm.h b/arch/m68k/include/asm/kmap_types_mm.h new file mode 100644 index 0000000..c843c63 --- /dev/null +++ b/arch/m68k/include/asm/kmap_types_mm.h @@ -0,0 +1,21 @@ +#ifndef __ASM_M68K_KMAP_TYPES_H +#define __ASM_M68K_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/arch/m68k/include/asm/kmap_types_no.h b/arch/m68k/include/asm/kmap_types_no.h new file mode 100644 index 0000000..bfb6707 --- /dev/null +++ b/arch/m68k/include/asm/kmap_types_no.h @@ -0,0 +1,21 @@ +#ifndef __ASM_M68K_KMAP_TYPES_H +#define __ASM_M68K_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/m68k/include/asm/linkage.h b/arch/m68k/include/asm/linkage.h new file mode 100644 index 0000000..5a822bb --- /dev/null +++ b/arch/m68k/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h new file mode 100644 index 0000000..6c25926 --- /dev/null +++ b/arch/m68k/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M68K_LOCAL_H +#define _ASM_M68K_LOCAL_H + +#include + +#endif /* _ASM_M68K_LOCAL_H */ diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h new file mode 100644 index 0000000..7e3594d --- /dev/null +++ b/arch/m68k/include/asm/m5206sim.h @@ -0,0 +1,131 @@ +/****************************************************************************/ + +/* + * m5206sim.h -- ColdFire 5206 System Integration Module support. + * + * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef m5206sim_h +#define m5206sim_h +/****************************************************************************/ + + +/* + * Define the 5206 SIM register set addresses. + */ +#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ +#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ +#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ +#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ +#ifdef CONFIG_M5206e +#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ +#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ +#endif + +#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ + +#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ + +#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ + +#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ +#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ +#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ +#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ +#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ +#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ +#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ + +#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ +#define MCFSIM_DMCR 0xc6 /* Default control */ + +#ifdef CONFIG_M5206e +#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ +#else +#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ +#endif + +#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#ifdef CONFIG_M5206e +#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ + /* Clear to select T0 input */ +#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ + /* Clear to select T0 output */ +#endif + +/* + * Some symbol defines for the Interrupt Control Register + */ +#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ +#ifdef CONFIG_M5206e +#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ +#endif + +#if defined(CONFIG_M5206e) +#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ +#endif + +/* + * Macro to get and set IMR register. It is 16 bits on the 5206. + */ +#define mcf_getimr() \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) + +#define mcf_getipr() \ + *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) + +/****************************************************************************/ +#endif /* m5206sim_h */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h new file mode 100644 index 0000000..49d016e --- /dev/null +++ b/arch/m68k/include/asm/m520xsim.h @@ -0,0 +1,63 @@ +/****************************************************************************/ + +/* + * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. + * + * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) + */ + +/****************************************************************************/ +#ifndef m520xsim_h +#define m520xsim_h +/****************************************************************************/ + + +/* + * Define the 5282 SIM register set addresses. + */ +#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 +#define MCFINT_UART0 26 /* Interrupt number for UART0 */ +#define MCFINT_UART1 27 /* Interrupt number for UART1 */ +#define MCFINT_UART2 28 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ +#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ +#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ +#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ +#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ +#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ +#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ + + +#define MCF_GPIO_PAR_UART (0xA4036) +#define MCF_GPIO_PAR_FECI2C (0xA4033) +#define MCF_GPIO_PAR_FEC (0xA4038) + +#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) +#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) + +#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) +#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) + +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) + +#define ICR_INTRCONF 0x05 +#define MCFPIT_IMR MCFINTC_IMRL +#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) + +/****************************************************************************/ +#endif /* m520xsim_h */ diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h new file mode 100644 index 0000000..bf39731 --- /dev/null +++ b/arch/m68k/include/asm/m523xsim.h @@ -0,0 +1,45 @@ +/****************************************************************************/ + +/* + * m523xsim.h -- ColdFire 523x System Integration Module support. + * + * (C) Copyright 2003-2005, Greg Ungerer + */ + +/****************************************************************************/ +#ifndef m523xsim_h +#define m523xsim_h +/****************************************************************************/ + + +/* + * Define the 523x SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ + +/****************************************************************************/ +#endif /* m523xsim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h new file mode 100644 index 0000000..366eb86 --- /dev/null +++ b/arch/m68k/include/asm/m5249sim.h @@ -0,0 +1,209 @@ +/****************************************************************************/ + +/* + * m5249sim.h -- ColdFire 5249 System Integration Module support. + * + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m5249sim_h +#define m5249sim_h +/****************************************************************************/ + +/* + * Define the 5249 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +/* + * General purpose IO registers (in MBAR2). + */ +#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ +#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ +#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ +#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ +#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ + +#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ +#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ +#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ + +#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ +#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ +#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ +#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ +#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ +#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ +#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ +#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ + +#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ + +#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ +#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ + + +/* + * Macro to set IMR register. It is 32 bits on the 5249. + */ +#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ + +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + +/****************************************************************************/ + +#ifdef __ASSEMBLER__ + +/* + * The M5249C3 board needs a little help getting all its SIM devices + * initialized at kernel start time. dBUG doesn't set much up, so + * we need to do it manually. + */ +.macro m5249c3_setup + /* + * Set MBAR1 and MBAR2, just incase they are not set. + */ + movel #0x10000001,%a0 + movec %a0,%MBAR /* map MBAR region */ + subql #1,%a0 /* get MBAR address in a0 */ + + movel #0x80000001,%a1 + movec %a1,#3086 /* map MBAR2 region */ + subql #1,%a1 /* get MBAR2 address in a1 */ + + /* + * Move secondary interrupts to base at 128. + */ + moveb #0x80,%d0 + moveb %d0,0x16b(%a1) /* interrupt base register */ + + /* + * Work around broken CSMR0/DRAM vector problem. + */ + movel #0x001F0021,%d0 /* disable C/I bit */ + movel %d0,0x84(%a0) /* set CSMR0 */ + + /* + * Disable the PLL firstly. (Who knows what state it is + * in here!). + */ + movel 0x180(%a1),%d0 /* get current PLL value */ + andl #0xfffffffe,%d0 /* PLL bypass first */ + movel %d0,0x180(%a1) /* set PLL register */ + nop + +#if CONFIG_CLOCK_FREQ == 140000000 + /* + * Set initial clock frequency. This assumes M5249C3 board + * is fitted with 11.2896MHz crystal. It will program the + * PLL for 140MHz. Lets go fast :-) + */ + movel #0x125a40f0,%d0 /* set for 140MHz */ + movel %d0,0x180(%a1) /* set PLL register */ + orl #0x1,%d0 + movel %d0,0x180(%a1) /* set PLL register */ +#endif + + /* + * Setup CS1 for ethernet controller. + * (Setup as per M5249C3 doco). + */ + movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ + movel %d0,0x8c(%a0) + movel #0x001f0021,%d0 /* CS1 size of 1Mb */ + movel %d0,0x90(%a0) + movew #0x0080,%d0 /* CS1 = 16bit port, AA */ + movew %d0,0x96(%a0) + + /* + * Setup CS2 for IDE interface. + */ + movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ + movel %d0,0x98(%a0) + movel #0x001f0001,%d0 /* CS2 size of 1MB */ + movel %d0,0x9c(%a0) + movew #0x0080,%d0 /* CS2 = 16bit, TA */ + movew %d0,0xa2(%a0) + + movel #0x00107000,%d0 /* IDEconfig1 */ + movel %d0,0x18c(%a1) + movel #0x000c0400,%d0 /* IDEconfig2 */ + movel %d0,0x190(%a1) + + movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ + orl %d0,0xc(%a1) /* function GPIO19 */ + orl %d0,0x8(%a1) /* enable GPIO19 as output */ + orl %d0,0x4(%a1) /* de-assert IDE reset */ +.endm + +#define PLATFORM_SETUP m5249c3_setup + +#endif /* __ASSEMBLER__ */ + +/****************************************************************************/ +#endif /* m5249sim_h */ diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h new file mode 100644 index 0000000..6217edc --- /dev/null +++ b/arch/m68k/include/asm/m5272sim.h @@ -0,0 +1,78 @@ +/****************************************************************************/ + +/* + * m5272sim.h -- ColdFire 5272 System Integration Module support. + * + * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef m5272sim_h +#define m5272sim_h +/****************************************************************************/ + + +/* + * Define the 5272 SIM register set addresses. + */ +#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ +#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ +#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ +#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ +#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ + +#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ + +#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ +#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ +#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ +#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ + +#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ +#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ +#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ +#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ + +#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ +#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ +#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ +#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ +#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ +#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ +#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ +#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ +#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ +#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ +#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ +#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ +#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ +#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ +#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ +#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ + +#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ +#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ +#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ +#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ +#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ +#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ +#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ + +#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ +#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ +#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ +#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ +#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ +#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ +#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ +#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ +#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ + + +/****************************************************************************/ +#endif /* m5272sim_h */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h new file mode 100644 index 0000000..1f63ab3 --- /dev/null +++ b/arch/m68k/include/asm/m527xsim.h @@ -0,0 +1,74 @@ +/****************************************************************************/ + +/* + * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. + * + * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m527xsim_h +#define m527xsim_h +/****************************************************************************/ + + +/* + * Define the 5270/5271 SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_UART1 14 /* Interrupt number for UART1 */ +#define MCFINT_UART2 15 /* Interrupt number for UART2 */ +#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ + +/* + * SDRAM configuration registers. + */ +#ifdef CONFIG_M5271 +#define MCFSIM_DCR 0x40 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +#endif +#ifdef CONFIG_M5275 +#define MCFSIM_DMR 0x40 /* SDRAM mode */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ +#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ +#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ +#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ +#endif + +/* + * GPIO pins setups to enable the UARTs. + */ +#ifdef CONFIG_M5271 +#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif +#ifdef CONFIG_M5275 +#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif + +/****************************************************************************/ +#endif /* m527xsim_h */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h new file mode 100644 index 0000000..28bf783 --- /dev/null +++ b/arch/m68k/include/asm/m528xsim.h @@ -0,0 +1,159 @@ +/****************************************************************************/ + +/* + * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. + * + * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef m528xsim_h +#define m528xsim_h +/****************************************************************************/ + + +/* + * Define the 5280/5282 SIM register set addresses. + */ +#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +#define MCFINT_VECBASE 64 /* Vector base number */ +#define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ + +/* + * SDRAM configuration registers. + */ +#define MCFSIM_DCR 0x44 /* SDRAM control */ +#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ +#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ +#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ +#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ + +/* + * Derek Cheung - 6 Feb 2005 + * add I2C and QSPI register definition using Freescale's MCF5282 + */ +/* set Port AS pin for I2C or UART */ +#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) + +/* Port UA Pin Assignment Register (8 Bit) */ +#define MCF5282_GPIO_PUAPAR 0x10005C + +/* Interrupt Mask Register Register Low */ +#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) +/* Interrupt Control Register 7 */ +#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) + + + +/********************************************************************* +* +* Inter-IC (I2C) Module +* +*********************************************************************/ +/* Read/Write access macros for general use */ +#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address +#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider +#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control +#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status +#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O + +/* Bit level definitions and macros */ +#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) + +#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) + +#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable +#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable +#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode +#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode +#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable +#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start + +#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit +#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave +#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy +#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost +#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write +#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt +#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge + + + +/********************************************************************* +* +* Queued Serial Peripheral Interface (QSPI) Module +* +*********************************************************************/ +/* Derek - 21 Feb 2005 */ +/* change to the format used in I2C */ +/* Read/Write access macros for general use */ +#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 +#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 +#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 +#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C +#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 +#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 +#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 + +/* Bit level definitions and macros */ +#define MCF5282_QSPI_QMR_MSTR (0x8000) +#define MCF5282_QSPI_QMR_DOHIE (0x4000) +#define MCF5282_QSPI_QMR_BITS_16 (0x0000) +#define MCF5282_QSPI_QMR_BITS_8 (0x2000) +#define MCF5282_QSPI_QMR_BITS_9 (0x2400) +#define MCF5282_QSPI_QMR_BITS_10 (0x2800) +#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) +#define MCF5282_QSPI_QMR_BITS_12 (0x3000) +#define MCF5282_QSPI_QMR_BITS_13 (0x3400) +#define MCF5282_QSPI_QMR_BITS_14 (0x3800) +#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) +#define MCF5282_QSPI_QMR_CPOL (0x0200) +#define MCF5282_QSPI_QMR_CPHA (0x0100) +#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QDLYR_SPE (0x80) +#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) +#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) + +#define MCF5282_QSPI_QWR_HALT (0x8000) +#define MCF5282_QSPI_QWR_WREN (0x4000) +#define MCF5282_QSPI_QWR_WRTO (0x2000) +#define MCF5282_QSPI_QWR_CSIV (0x1000) +#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) +#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) +#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) + +#define MCF5282_QSPI_QIR_WCEFB (0x8000) +#define MCF5282_QSPI_QIR_ABRTB (0x4000) +#define MCF5282_QSPI_QIR_ABRTL (0x1000) +#define MCF5282_QSPI_QIR_WCEFE (0x0800) +#define MCF5282_QSPI_QIR_ABRTE (0x0400) +#define MCF5282_QSPI_QIR_SPIFE (0x0100) +#define MCF5282_QSPI_QIR_WCEF (0x0008) +#define MCF5282_QSPI_QIR_ABRT (0x0004) +#define MCF5282_QSPI_QIR_SPIF (0x0001) + +#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) + +#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) +#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) +#define MCF5282_QSPI_QCR_CONT (0x8000) +#define MCF5282_QSPI_QCR_BITSE (0x4000) +#define MCF5282_QSPI_QCR_DT (0x2000) +#define MCF5282_QSPI_QCR_DSCK (0x1000) +#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) + +/****************************************************************************/ +#endif /* m528xsim_h */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h new file mode 100644 index 0000000..5886728 --- /dev/null +++ b/arch/m68k/include/asm/m5307sim.h @@ -0,0 +1,181 @@ +/****************************************************************************/ + +/* + * m5307sim.h -- ColdFire 5307 System Integration Module support. + * + * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. + * (C) Copyright 1999, Lineo (www.lineo.com) + * + * Modified by David W. Miller for the MCF5307 Eval Board. + */ + +/****************************************************************************/ +#ifndef m5307sim_h +#define m5307sim_h +/****************************************************************************/ + +/* + * Define the 5307 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ + +#ifdef CONFIG_OLDMASK +#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ +#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ +#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#else +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#endif /* CONFIG_OLDMASK */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + +#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ + + +/* Definition offset address for CS2-7 -- old mask 5307 */ + +#define MCF5307_CS2 (0x400000) +#define MCF5307_CS3 (0x600000) +#define MCF5307_CS4 (0x800000) +#define MCF5307_CS5 (0xA00000) +#define MCF5307_CS6 (0xC00000) +#define MCF5307_CS7 (0xE00000) + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +#if defined(CONFIG_M5307) +#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ +#endif + +/* + * Macro to set IMR register. It is 32 bits on the 5307. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ + /* Clear to select par I/O */ +#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ + /* Clear to select par I/O */ + +/* + * Defines for the IRQPAR Register + */ +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 + + +/* + * Define the Cache register flags. + */ +#define CACR_EC (1<<31) +#define CACR_ESB (1<<29) +#define CACR_DPI (1<<28) +#define CACR_HLCK (1<<27) +#define CACR_CINVA (1<<24) +#define CACR_DNFB (1<<10) +#define CACR_DCM_WTHRU (0<<8) +#define CACR_DCM_WBACK (1<<8) +#define CACR_DCM_OFF_PRE (2<<8) +#define CACR_DCM_OFF_IMP (3<<8) +#define CACR_DW (1<<5) + +#define ACR_BASE_POS 24 +#define ACR_MASK_POS 16 +#define ACR_ENABLE (1<<15) +#define ACR_USER (0<<13) +#define ACR_SUPER (1<<13) +#define ACR_ANY (2<<13) +#define ACR_CM_WTHRU (0<<5) +#define ACR_CM_WBACK (1<<5) +#define ACR_CM_OFF_PRE (2<<5) +#define ACR_CM_OFF_IMP (3<<5) +#define ACR_WPROTECT (1<<2) + +/****************************************************************************/ +#endif /* m5307sim_h */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h new file mode 100644 index 0000000..1835fd2 --- /dev/null +++ b/arch/m68k/include/asm/m532xsim.h @@ -0,0 +1,2238 @@ +/****************************************************************************/ + +/* + * m532xsim.h -- ColdFire 5329 registers + */ + +/****************************************************************************/ +#ifndef m532xsim_h +#define m532xsim_h +/****************************************************************************/ + +#define MCF_REG32(x) (*(volatile unsigned long *)(x)) +#define MCF_REG16(x) (*(volatile unsigned short *)(x)) +#define MCF_REG08(x) (*(volatile unsigned char *)(x)) + +#define MCFINT_VECBASE 64 +#define MCFINT_UART0 26 /* Interrupt number for UART0 */ +#define MCFINT_UART1 27 /* Interrupt number for UART1 */ + +#define MCF_WTM_WCR MCF_REG16(0xFC098000) + +/* + * Define the 532x SIM register set addresses. + */ +#define MCFSIM_IPRL 0xFC048004 +#define MCFSIM_IPRH 0xFC048000 +#define MCFSIM_IPR MCFSIM_IPRL +#define MCFSIM_IMRL 0xFC04800C +#define MCFSIM_IMRH 0xFC048008 +#define MCFSIM_IMR MCFSIM_IMRL +#define MCFSIM_ICR0 0xFC048040 +#define MCFSIM_ICR1 0xFC048041 +#define MCFSIM_ICR2 0xFC048042 +#define MCFSIM_ICR3 0xFC048043 +#define MCFSIM_ICR4 0xFC048044 +#define MCFSIM_ICR5 0xFC048045 +#define MCFSIM_ICR6 0xFC048046 +#define MCFSIM_ICR7 0xFC048047 +#define MCFSIM_ICR8 0xFC048048 +#define MCFSIM_ICR9 0xFC048049 +#define MCFSIM_ICR10 0xFC04804A +#define MCFSIM_ICR11 0xFC04804B + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + + +#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ + +#define MCFSIM_IMR_SIMR0 0xFC04801C +#define MCFSIM_IMR_SIMR1 0xFC04C01C +#define MCFSIM_IMR_CIMR0 0xFC04801D +#define MCFSIM_IMR_CIMR1 0xFC04C01D + +#define MCFSIM_ICR_TIMER1 (0xFC048040+32) +#define MCFSIM_ICR_TIMER2 (0xFC048040+33) + + +/* + * Macro to set IMR register. It is 32 bits on the 5307. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + +#define mcf_getiprl() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) + +#define mcf_getiprh() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) + + +#define mcf_enable_irq0(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); + +#define mcf_enable_irq1(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); + +#define mcf_disable_irq0(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); + +#define mcf_disable_irq1(irq) \ + *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); + +/* + * Define the Cache register flags. + */ +#define CACR_EC (1<<31) +#define CACR_ESB (1<<29) +#define CACR_DPI (1<<28) +#define CACR_HLCK (1<<27) +#define CACR_CINVA (1<<24) +#define CACR_DNFB (1<<10) +#define CACR_DCM_WTHRU (0<<8) +#define CACR_DCM_WBACK (1<<8) +#define CACR_DCM_OFF_PRE (2<<8) +#define CACR_DCM_OFF_IMP (3<<8) +#define CACR_DW (1<<5) + +#define ACR_BASE_POS 24 +#define ACR_MASK_POS 16 +#define ACR_ENABLE (1<<15) +#define ACR_USER (0<<13) +#define ACR_SUPER (1<<13) +#define ACR_ANY (2<<13) +#define ACR_CM_WTHRU (0<<5) +#define ACR_CM_WBACK (1<<5) +#define ACR_CM_OFF_PRE (2<<5) +#define ACR_CM_OFF_IMP (3<<5) +#define ACR_WPROTECT (1<<2) + +/********************************************************************* + * + * Inter-IC (I2C) Module + * + *********************************************************************/ + +/* Read/Write access macros for general use */ +#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address +#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider +#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control +#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status +#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O + +/* Bit level definitions and macros */ +#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) + +#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) + +#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable +#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable +#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode +#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode +#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable +#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start + +#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit +#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave +#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy +#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost +#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write +#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt +#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge + +#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) + + +/* + * The M5329EVB board needs a help getting its devices initialized + * at kernel start time if dBUG doesn't set it up (for example + * it is not used), so we need to do it manually. + */ +#ifdef __ASSEMBLER__ +.macro m5329EVB_setup + movel #0xFC098000, %a7 + movel #0x0, (%a7) +#define CORE_SRAM 0x80000000 +#define CORE_SRAM_SIZE 0x8000 + movel #CORE_SRAM, %d0 + addl #0x221, %d0 + movec %d0,%RAMBAR1 + movel #CORE_SRAM, %sp + addl #CORE_SRAM_SIZE, %sp + jsr sysinit +.endm +#define PLATFORM_SETUP m5329EVB_setup + +#endif /* __ASSEMBLER__ */ + +/********************************************************************* + * + * Chip Configuration Module (CCM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) +#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) +#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) +#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) +#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) +#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) +#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) + +/* Bit definitions and macros for MCF_CCM_CCR */ +#define MCF_CCM_CCR_RESERVED (0x0001) +#define MCF_CCM_CCR_PLL_MODE (0x0003) +#define MCF_CCM_CCR_OSC_MODE (0x0005) +#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define MCF_CCM_CCR_LOAD (0x0021) +#define MCF_CCM_CCR_LIMP (0x0041) +#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) + +/* Bit definitions and macros for MCF_CCM_RCON */ +#define MCF_CCM_RCON_RESERVED (0x0001) +#define MCF_CCM_RCON_PLL_MODE (0x0003) +#define MCF_CCM_RCON_OSC_MODE (0x0005) +#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) +#define MCF_CCM_RCON_LOAD (0x0021) +#define MCF_CCM_RCON_LIMP (0x0041) +#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) + +/* Bit definitions and macros for MCF_CCM_CIR */ +#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) +#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) + +/* Bit definitions and macros for MCF_CCM_MISCCR */ +#define MCF_CCM_MISCCR_USBSRC (0x0001) +#define MCF_CCM_MISCCR_USBDIV (0x0002) +#define MCF_CCM_MISCCR_SSI_SRC (0x0010) +#define MCF_CCM_MISCCR_TIM_DMA (0x0020) +#define MCF_CCM_MISCCR_SSI_PUS (0x0040) +#define MCF_CCM_MISCCR_SSI_PUE (0x0080) +#define MCF_CCM_MISCCR_LCD_CHEN (0x0100) +#define MCF_CCM_MISCCR_LIMP (0x1000) +#define MCF_CCM_MISCCR_PLL_LOCK (0x2000) + +/* Bit definitions and macros for MCF_CCM_CDR */ +#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) +#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) + +/* Bit definitions and macros for MCF_CCM_UHCSR */ +#define MCF_CCM_UHCSR_XPDE (0x0001) +#define MCF_CCM_UHCSR_UHMIE (0x0002) +#define MCF_CCM_UHCSR_WKUP (0x0004) +#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_CCM_UOCSR */ +#define MCF_CCM_UOCSR_XPDE (0x0001) +#define MCF_CCM_UOCSR_UOMIE (0x0002) +#define MCF_CCM_UOCSR_WKUP (0x0004) +#define MCF_CCM_UOCSR_PWRFLT (0x0008) +#define MCF_CCM_UOCSR_SEND (0x0010) +#define MCF_CCM_UOCSR_VVLD (0x0020) +#define MCF_CCM_UOCSR_BVLD (0x0040) +#define MCF_CCM_UOCSR_AVLD (0x0080) +#define MCF_CCM_UOCSR_DPPU (0x0100) +#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) +#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) +#define MCF_CCM_UOCSR_DRV_VBUS (0x0800) +#define MCF_CCM_UOCSR_DMPD (0x1000) +#define MCF_CCM_UOCSR_DPPD (0x2000) +#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) + +/********************************************************************* + * + * DMA Timers (DTIM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) +#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) +#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) +#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) +#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) +#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) +#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) +#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) +#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) +#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) +#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) +#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) +#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) +#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) +#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) +#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) +#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) +#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) +#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) +#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) +#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) +#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) +#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) +#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) +#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) +#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) +#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) +#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) +#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) +#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) + +/* Bit definitions and macros for MCF_DTIM_DTMR */ +#define MCF_DTIM_DTMR_RST (0x0001) +#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) +#define MCF_DTIM_DTMR_FRR (0x0008) +#define MCF_DTIM_DTMR_ORRI (0x0010) +#define MCF_DTIM_DTMR_OM (0x0020) +#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) +#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) +#define MCF_DTIM_DTMR_CE_ANY (0x00C0) +#define MCF_DTIM_DTMR_CE_FALL (0x0080) +#define MCF_DTIM_DTMR_CE_RISE (0x0040) +#define MCF_DTIM_DTMR_CE_NONE (0x0000) +#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) +#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) +#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) +#define MCF_DTIM_DTMR_CLK_STOP (0x0000) + +/* Bit definitions and macros for MCF_DTIM_DTXMR */ +#define MCF_DTIM_DTXMR_MODE16 (0x01) +#define MCF_DTIM_DTXMR_DMAEN (0x80) + +/* Bit definitions and macros for MCF_DTIM_DTER */ +#define MCF_DTIM_DTER_CAP (0x01) +#define MCF_DTIM_DTER_REF (0x02) + +/* Bit definitions and macros for MCF_DTIM_DTRR */ +#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_DTIM_DTCR */ +#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_DTIM_DTCN */ +#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) + +/********************************************************************* + * + * FlexBus Chip Selects (FBCS) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) +#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) +#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) +#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) +#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) +#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) +#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) +#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) +#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) +#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) +#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) +#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) +#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) +#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) +#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) +#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) +#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) +#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) +#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) +#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) +#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) + +/* Bit definitions and macros for MCF_FBCS_CSAR */ +#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) + +/* Bit definitions and macros for MCF_FBCS_CSMR */ +#define MCF_FBCS_CSMR_V (0x00000001) +#define MCF_FBCS_CSMR_WP (0x00000100) +#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) +#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) +#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) +#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) +#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) +#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) +#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) +#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) +#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) +#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) +#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) +#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) +#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) +#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) +#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) +#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) +#define MCF_FBCS_CSMR_BAM_512K (0x00070000) +#define MCF_FBCS_CSMR_BAM_256K (0x00030000) +#define MCF_FBCS_CSMR_BAM_128K (0x00010000) +#define MCF_FBCS_CSMR_BAM_64K (0x00000000) + +/* Bit definitions and macros for MCF_FBCS_CSCR */ +#define MCF_FBCS_CSCR_BSTW (0x00000008) +#define MCF_FBCS_CSCR_BSTR (0x00000010) +#define MCF_FBCS_CSCR_BEM (0x00000020) +#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) +#define MCF_FBCS_CSCR_AA (0x00000100) +#define MCF_FBCS_CSCR_SBM (0x00000200) +#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) +#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) +#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) +#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) +#define MCF_FBCS_CSCR_SWSEN (0x00800000) +#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) +#define MCF_FBCS_CSCR_PS_8 (0x0040) +#define MCF_FBCS_CSCR_PS_16 (0x0080) +#define MCF_FBCS_CSCR_PS_32 (0x0000) + +/********************************************************************* + * + * General Purpose I/O (GPIO) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) +#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) +#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) +#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) +#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) +#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) +#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) +#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) +#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) +#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) +#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) +#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) +#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) +#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) +#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) +#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) +#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) +#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) +#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) +#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) +#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) +#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) +#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) +#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) +#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) +#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) +#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) +#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) +#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) +#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) +#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) +#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) +#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) +#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) +#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) +#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) +#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) +#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) +#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) +#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) +#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) +#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) +#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) +#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) +#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) +#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) +#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) +#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) +#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) +#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) +#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) +#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) +#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) +#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) +#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) +#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) +#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) +#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) +#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) +#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) +#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) +#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) +#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) +#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) +#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) +#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) +#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) +#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) +#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) +#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) +#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) +#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) +#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) +#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) +#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) +#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) +#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) +#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) +#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) +#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) +#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) +#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) +#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) +#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) +#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) +#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) +#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) +#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) +#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) +#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECH */ +#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) +#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) +#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) +#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) +#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) +#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) +#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) +#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECL */ +#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) +#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) +#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) +#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) +#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) +#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) +#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) +#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_SSI */ +#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) +#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) +#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) +#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) +#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ +#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) +#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_BE */ +#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) +#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) +#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) +#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_CS */ +#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) +#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) +#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) +#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) +#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_PWM */ +#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) +#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) +#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) +#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) +#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_UART */ +#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) +#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) +#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) +#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) +#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) +#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) +#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) +#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ +#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) +#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ +#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) +#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ +#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) +#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) +#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) +#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ +#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) +#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ +#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) +#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ +#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) +#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ +#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) +#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ +#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) +#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_BE */ +#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) +#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) +#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) +#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_CS */ +#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) +#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) +#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) +#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) +#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ +#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) +#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) +#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_UART */ +#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) +#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) +#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) +#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) +#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) +#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) +#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) +#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) +#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) +#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ +#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) +#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) +#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ +#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) +#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) +#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) +#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) +#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ +#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) +#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) +#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) +#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) +#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) +#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) +#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) +#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) +#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ +#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) +#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) +#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ +#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) +#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) +#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) +#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) +#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ +#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) +#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ +#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) +#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ +#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) +#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) +#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) +#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ +#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) +#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) +#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) +#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ +#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) +#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) +#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ +#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) + +/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) +#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) + +/* Bit definitions and macros for MCF_GPIO_PAR_FEC */ +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) +#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) +#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_PWM */ +#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) +#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) + +/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ +#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) +#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) + +/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ +#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) +#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) +#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) +#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) +#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_BE */ +#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) +#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) +#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) +#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) + +/* Bit definitions and macros for MCF_GPIO_PAR_CS */ +#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) +#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) +#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) +#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) +#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) +#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_SSI */ +#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) +#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) +#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_GPIO_PAR_UART */ +#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) +#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) +#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) +#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) +#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) +#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) +#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) +#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) +#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) +#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) +#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) +#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) +#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) + +/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ +#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) +#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) + +/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ +#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) +#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) +#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) +#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) +#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) + +/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ +#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) +#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) + +/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ +#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) +#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) +#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) +#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) +#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) +#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) +#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) +#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) +#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) + +/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ +#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) +#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) + +/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) +#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) +#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) + +/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ +#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ +#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ +#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_UART */ +#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) +#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) + +/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ +#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ +#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ +#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ +#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ +#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ +#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) + +/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ +#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) + +/********************************************************************* + * + * Interrupt Controller (INTC) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) +#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) +#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) +#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) +#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) +#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) +#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) +#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) +#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) +#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) +#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) +#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) +#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) +#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) +#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) +#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) +#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) +#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) +#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) +#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) +#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) +#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) +#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) +#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) +#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) +#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) +#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) +#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) +#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) +#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) +#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) +#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) +#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) +#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) +#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) +#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) +#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) +#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) +#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) +#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) +#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) +#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) +#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) +#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) +#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) +#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) +#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) +#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) +#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) +#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) +#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) +#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) +#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) +#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) +#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) +#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) +#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) +#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) +#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) +#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) +#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) +#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) +#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) +#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) +#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) +#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) +#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) +#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) +#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) +#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) +#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) +#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) +#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) +#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) +#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) +#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) +#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) +#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) +#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) +#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) +#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) +#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) +#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) +#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) +#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) +#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) +#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) +#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) +#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) +#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) +#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) +#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) +#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) +#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) +#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) +#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) +#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) +#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) +#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) +#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) +#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) +#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) +#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) +#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) +#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) +#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) +#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) +#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) +#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) +#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) +#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) +#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) +#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) +#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) +#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) +#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) +#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) +#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) +#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) +#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) +#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) +#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) +#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) +#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) +#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) +#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) +#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) +#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) +#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) +#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) +#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) +#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) +#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) +#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) +#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) +#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) +#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) +#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) +#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) +#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) +#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) +#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) +#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) +#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) +#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) +#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) +#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) +#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) +#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) +#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) +#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) +#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) +#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) +#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) +#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) +#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) +#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) +#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) +#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) +#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) +#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) +#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) +#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) +#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) +#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) +#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) +#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) +#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) +#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) +#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) +#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) +#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) +#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) +#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) +#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) +#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) +#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) +#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) +#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) +#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) +#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) +#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) +#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) +#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) +#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) +#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) +#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) +#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) +#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) +#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) +#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) +#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) +#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) +#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) +#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) +#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) +#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) +#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) +#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) +#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) +#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) +#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) +#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) +#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) +#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) +#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) +#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) +#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) +#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) +#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) +#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) +#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) +#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) +#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) +#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) +#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) +#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) +#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) +#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) +#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) +#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) +#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) +#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) +#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) +#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) +#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) +#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) +#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) +#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) +#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) +#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) +#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) +#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) +#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) +#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) +#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) +#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) +#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) +#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) +#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) +#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) +#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) +#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) +#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) +#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) +#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) +#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) +#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) +#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) +#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) +#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) +#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) +#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) + +/* Bit definitions and macros for MCF_INTC_IPRH */ +#define MCF_INTC_IPRH_INT32 (0x00000001) +#define MCF_INTC_IPRH_INT33 (0x00000002) +#define MCF_INTC_IPRH_INT34 (0x00000004) +#define MCF_INTC_IPRH_INT35 (0x00000008) +#define MCF_INTC_IPRH_INT36 (0x00000010) +#define MCF_INTC_IPRH_INT37 (0x00000020) +#define MCF_INTC_IPRH_INT38 (0x00000040) +#define MCF_INTC_IPRH_INT39 (0x00000080) +#define MCF_INTC_IPRH_INT40 (0x00000100) +#define MCF_INTC_IPRH_INT41 (0x00000200) +#define MCF_INTC_IPRH_INT42 (0x00000400) +#define MCF_INTC_IPRH_INT43 (0x00000800) +#define MCF_INTC_IPRH_INT44 (0x00001000) +#define MCF_INTC_IPRH_INT45 (0x00002000) +#define MCF_INTC_IPRH_INT46 (0x00004000) +#define MCF_INTC_IPRH_INT47 (0x00008000) +#define MCF_INTC_IPRH_INT48 (0x00010000) +#define MCF_INTC_IPRH_INT49 (0x00020000) +#define MCF_INTC_IPRH_INT50 (0x00040000) +#define MCF_INTC_IPRH_INT51 (0x00080000) +#define MCF_INTC_IPRH_INT52 (0x00100000) +#define MCF_INTC_IPRH_INT53 (0x00200000) +#define MCF_INTC_IPRH_INT54 (0x00400000) +#define MCF_INTC_IPRH_INT55 (0x00800000) +#define MCF_INTC_IPRH_INT56 (0x01000000) +#define MCF_INTC_IPRH_INT57 (0x02000000) +#define MCF_INTC_IPRH_INT58 (0x04000000) +#define MCF_INTC_IPRH_INT59 (0x08000000) +#define MCF_INTC_IPRH_INT60 (0x10000000) +#define MCF_INTC_IPRH_INT61 (0x20000000) +#define MCF_INTC_IPRH_INT62 (0x40000000) +#define MCF_INTC_IPRH_INT63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IPRL */ +#define MCF_INTC_IPRL_INT0 (0x00000001) +#define MCF_INTC_IPRL_INT1 (0x00000002) +#define MCF_INTC_IPRL_INT2 (0x00000004) +#define MCF_INTC_IPRL_INT3 (0x00000008) +#define MCF_INTC_IPRL_INT4 (0x00000010) +#define MCF_INTC_IPRL_INT5 (0x00000020) +#define MCF_INTC_IPRL_INT6 (0x00000040) +#define MCF_INTC_IPRL_INT7 (0x00000080) +#define MCF_INTC_IPRL_INT8 (0x00000100) +#define MCF_INTC_IPRL_INT9 (0x00000200) +#define MCF_INTC_IPRL_INT10 (0x00000400) +#define MCF_INTC_IPRL_INT11 (0x00000800) +#define MCF_INTC_IPRL_INT12 (0x00001000) +#define MCF_INTC_IPRL_INT13 (0x00002000) +#define MCF_INTC_IPRL_INT14 (0x00004000) +#define MCF_INTC_IPRL_INT15 (0x00008000) +#define MCF_INTC_IPRL_INT16 (0x00010000) +#define MCF_INTC_IPRL_INT17 (0x00020000) +#define MCF_INTC_IPRL_INT18 (0x00040000) +#define MCF_INTC_IPRL_INT19 (0x00080000) +#define MCF_INTC_IPRL_INT20 (0x00100000) +#define MCF_INTC_IPRL_INT21 (0x00200000) +#define MCF_INTC_IPRL_INT22 (0x00400000) +#define MCF_INTC_IPRL_INT23 (0x00800000) +#define MCF_INTC_IPRL_INT24 (0x01000000) +#define MCF_INTC_IPRL_INT25 (0x02000000) +#define MCF_INTC_IPRL_INT26 (0x04000000) +#define MCF_INTC_IPRL_INT27 (0x08000000) +#define MCF_INTC_IPRL_INT28 (0x10000000) +#define MCF_INTC_IPRL_INT29 (0x20000000) +#define MCF_INTC_IPRL_INT30 (0x40000000) +#define MCF_INTC_IPRL_INT31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IMRH */ +#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) +#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) +#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) +#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) +#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) +#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) +#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) +#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) +#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) +#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) +#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) +#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) +#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) +#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) +#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) +#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) +#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) +#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) +#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) +#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) +#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) +#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) +#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) +#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) +#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) +#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) +#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) +#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) +#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) +#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) +#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) +#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_IMRL */ +#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) +#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) +#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) +#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) +#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) +#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) +#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) +#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) +#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) +#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) +#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) +#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) +#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) +#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) +#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) +#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) +#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) +#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) +#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) +#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) +#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) +#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) +#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) +#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) +#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) +#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) +#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) +#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) +#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) +#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) +#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) +#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_INTFRCH */ +#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) +#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) +#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) +#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) +#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) +#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) +#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) +#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) +#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) +#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) +#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) +#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) +#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) +#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) +#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) +#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) +#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) +#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) +#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) +#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) +#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) +#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) +#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) +#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) +#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) +#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) +#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) +#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) +#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) +#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) +#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) +#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_INTFRCL */ +#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) +#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) +#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) +#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) +#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) +#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) +#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) +#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) +#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) +#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) +#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) +#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) +#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) +#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) +#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) +#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) +#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) +#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) +#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) +#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) +#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) +#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) +#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) +#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) +#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) +#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) +#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) +#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) +#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) +#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) +#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) +#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) + +/* Bit definitions and macros for MCF_INTC_ICONFIG */ +#define MCF_INTC_ICONFIG_EMASK (0x0020) +#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) +#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) +#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) +#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) +#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) +#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) +#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) + +/* Bit definitions and macros for MCF_INTC_SIMR */ +#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) + +/* Bit definitions and macros for MCF_INTC_CIMR */ +#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) + +/* Bit definitions and macros for MCF_INTC_CLMASK */ +#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for MCF_INTC_SLMASK */ +#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) + +/* Bit definitions and macros for MCF_INTC_ICR */ +#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) + +/* Bit definitions and macros for MCF_INTC_SWIACK */ +#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) + +/* Bit definitions and macros for MCF_INTC_LIACK */ +#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) + +/********************************************************************/ +/********************************************************************* +* +* LCD Controller (LCDC) +* +*********************************************************************/ + +/* Register read/write macros */ +#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) +#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) +#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) +#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) +#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) +#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) +#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) +#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) +#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) +#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) +#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) +#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) +#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) +#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) +#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) +#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) +#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) +#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) +#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) +#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) +#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) +#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) +#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) +#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) +#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) +#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) + +/* Bit definitions and macros for MCF_LCDC_LSSAR */ +#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for MCF_LCDC_LSR */ +#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for MCF_LCDC_LVPWR */ +#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for MCF_LCDC_LCPR */ +#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) +#define MCF_LCDC_LCPR_OP (0x10000000) +#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) +#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) +#define MCF_LCDC_LCPR_CC_OR (0x40000000) +#define MCF_LCDC_LCPR_CC_XOR (0x80000000) +#define MCF_LCDC_LCPR_CC_AND (0xC0000000) +#define MCF_LCDC_LCPR_OP_ON (0x10000000) +#define MCF_LCDC_LCPR_OP_OFF (0x00000000) + +/* Bit definitions and macros for MCF_LCDC_LCWHBR */ +#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) +#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) +#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) +#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) + +/* Bit definitions and macros for MCF_LCDC_LCCMR */ +#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) +#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) + +/* Bit definitions and macros for MCF_LCDC_LPCR */ +#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LPCR_SHARP (0x00000040) +#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) +#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) +#define MCF_LCDC_LPCR_ACDSEL (0x00008000) +#define MCF_LCDC_LPCR_REV_VS (0x00010000) +#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) +#define MCF_LCDC_LPCR_ENDSEL (0x00040000) +#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) +#define MCF_LCDC_LPCR_OEPOL (0x00100000) +#define MCF_LCDC_LPCR_CLKPOL (0x00200000) +#define MCF_LCDC_LPCR_LPPOL (0x00400000) +#define MCF_LCDC_LPCR_FLM (0x00800000) +#define MCF_LCDC_LPCR_PIXPOL (0x01000000) +#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) +#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) +#define MCF_LCDC_LPCR_COLOR (0x40000000) +#define MCF_LCDC_LPCR_TFT (0x80000000) +#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) +#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) +#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) +#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) +#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) +#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) +#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) +#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) +#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) +#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) +#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) +#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) +#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) +#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) + +#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) + +/* Bit definitions and macros for MCF_LCDC_LHCR */ +#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) +#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for MCF_LCDC_LVCR */ +#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) +#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) + +/* Bit definitions and macros for MCF_LCDC_LPOR */ +#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for MCF_LCDC_LPCCR */ +#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) +#define MCF_LCDC_LPCCR_CC_EN (0x00000100) +#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) +#define MCF_LCDC_LPCCR_LDMSK (0x00008000) +#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) +#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) +#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) +#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) + +/* Bit definitions and macros for MCF_LCDC_LDCR */ +#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) +#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LDCR_BURST (0x80000000) + +/* Bit definitions and macros for MCF_LCDC_LRMCR */ +#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) + +/* Bit definitions and macros for MCF_LCDC_LICR */ +#define MCF_LCDC_LICR_INTCON (0x00000001) +#define MCF_LCDC_LICR_INTSYN (0x00000004) +#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) + +/* Bit definitions and macros for MCF_LCDC_LIER */ +#define MCF_LCDC_LIER_BOF_EN (0x00000001) +#define MCF_LCDC_LIER_EOF_EN (0x00000002) +#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) +#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) +#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) +#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) +#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) +#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) + +/* Bit definitions and macros for MCF_LCDC_LISR */ +#define MCF_LCDC_LISR_BOF (0x00000001) +#define MCF_LCDC_LISR_EOF (0x00000002) +#define MCF_LCDC_LISR_ERR_RES (0x00000004) +#define MCF_LCDC_LISR_UDR_ERR (0x00000008) +#define MCF_LCDC_LISR_GW_BOF (0x00000010) +#define MCF_LCDC_LISR_GW_EOF (0x00000020) +#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) +#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) + +/* Bit definitions and macros for MCF_LCDC_LGWSAR */ +#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) + +/* Bit definitions and macros for MCF_LCDC_LGWSR */ +#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) + +/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ +#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) + +/* Bit definitions and macros for MCF_LCDC_LGWPOR */ +#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) + +/* Bit definitions and macros for MCF_LCDC_LGWPR */ +#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) +#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) + +/* Bit definitions and macros for MCF_LCDC_LGWCR */ +#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) +#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) +#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) +#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) +#define MCF_LCDC_LGWCR_GWE (0x00400000) +#define MCF_LCDC_LGWCR_GWCKE (0x00800000) +#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) + +/* Bit definitions and macros for MCF_LCDC_LGWDCR */ +#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) +#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) +#define MCF_LCDC_LGWDCR_GWBT (0x80000000) + +/* Bit definitions and macros for MCF_LCDC_LSCR */ +#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) +#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) +#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) +#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) +#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) + +/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ +#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ +#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) + +/********************************************************************* + * + * Phase Locked Loop (PLL) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) +#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) +#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) +#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) + +/* Bit definitions and macros for MCF_PLL_PODR */ +#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) +#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) + +/* Bit definitions and macros for MCF_PLL_PLLCR */ +#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) +#define MCF_PLL_PLLCR_DITHEN (0x80) + +/* Bit definitions and macros for MCF_PLL_PMDR */ +#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) + +/* Bit definitions and macros for MCF_PLL_PFDR */ +#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) + +/********************************************************************* + * + * System Control Module Registers (SCM) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_SCM_MPR MCF_REG32(0xFC000000) +#define MCF_SCM_PACRA MCF_REG32(0xFC000020) +#define MCF_SCM_PACRB MCF_REG32(0xFC000024) +#define MCF_SCM_PACRC MCF_REG32(0xFC000028) +#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) +#define MCF_SCM_PACRE MCF_REG32(0xFC000040) +#define MCF_SCM_PACRF MCF_REG32(0xFC000044) + +#define MCF_SCM_BCR MCF_REG32(0xFC040024) + +/********************************************************************* + * + * SDRAM Controller (SDRAMC) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) +#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) +#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) +#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) +#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) +#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) +#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) +#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) +#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) +#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) +#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) + +/* Bit definitions and macros for MCF_SDRAMC_SDMR */ +#define MCF_SDRAMC_SDMR_CMD (0x00010000) +#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) +#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) +#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) +#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCR */ +#define MCF_SDRAMC_SDCR_IPALL (0x00000002) +#define MCF_SDRAMC_SDCR_IREF (0x00000004) +#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) +#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) +#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) +#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) +#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) +#define MCF_SDRAMC_SDCR_REF (0x10000000) +#define MCF_SDRAMC_SDCR_DDR (0x20000000) +#define MCF_SDRAMC_SDCR_CKE (0x40000000) +#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) +#define MCF_SDRAMC_SDCR_PS_16 (0x00002000) +#define MCF_SDRAMC_SDCR_PS_32 (0x00000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ +#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) +#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) +#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) +#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) +#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) +#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) + +/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ +#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) +#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) +#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) +#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) + +/* Device Errata - LIMP mode work around */ +#define MCF_SDRAMC_REFRESH (0x40000000) + +/* Bit definitions and macros for MCF_SDRAMC_SDDS */ +#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) +#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) +#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) +#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) +#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) + +/* Bit definitions and macros for MCF_SDRAMC_SDCS */ +#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) +#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) +#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) +#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) +#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) +#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) +#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) +#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) +#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) +#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) +#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) +#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) +#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) +#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) +#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) +#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) +#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) + +/********************************************************************* + * + * FlexCAN module registers + * + *********************************************************************/ +#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) +#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) +#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) +#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) +#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) +#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) +#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) +#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) +#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) +#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) +#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) + +#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) +#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) +#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) + +/* + * FlexCAN Module Configuration Register + */ +#define CANMCR_MDIS (0x80000000) +#define CANMCR_FRZ (0x40000000) +#define CANMCR_HALT (0x10000000) +#define CANMCR_SOFTRST (0x02000000) +#define CANMCR_FRZACK (0x01000000) +#define CANMCR_SUPV (0x00800000) +#define CANMCR_MAXMB(x) ((x)&0x0F) + +/* + * FlexCAN Control Register + */ +#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) +#define CANCTRL_RJW(x) (((x)&0x03)<<22) +#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) +#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) +#define CANCTRL_BOFFMSK (0x00008000) +#define CANCTRL_ERRMSK (0x00004000) +#define CANCTRL_CLKSRC (0x00002000) +#define CANCTRL_LPB (0x00001000) +#define CANCTRL_SAMP (0x00000080) +#define CANCTRL_BOFFREC (0x00000040) +#define CANCTRL_TSYNC (0x00000020) +#define CANCTRL_LBUF (0x00000010) +#define CANCTRL_LOM (0x00000008) +#define CANCTRL_PROPSEG(x) ((x)&0x07) + +/* + * FlexCAN Error Counter Register + */ +#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) +#define ERRCNT_TXECTR(x) ((x)&0xFF) + +/* + * FlexCAN Error and Status Register + */ +#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) +#define ERRSTAT_ACKERR (0x00002000) +#define ERRSTAT_CRCERR (0x00001000) +#define ERRSTAT_FRMERR (0x00000800) +#define ERRSTAT_STFERR (0x00000400) +#define ERRSTAT_TXWRN (0x00000200) +#define ERRSTAT_RXWRN (0x00000100) +#define ERRSTAT_IDLE (0x00000080) +#define ERRSTAT_TXRX (0x00000040) +#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) +#define ERRSTAT_BOFFINT (0x00000004) +#define ERRSTAT_ERRINT (0x00000002) + +/* + * Interrupt Mask Register + */ +#define IMASK_BUF15M (0x8000) +#define IMASK_BUF14M (0x4000) +#define IMASK_BUF13M (0x2000) +#define IMASK_BUF12M (0x1000) +#define IMASK_BUF11M (0x0800) +#define IMASK_BUF10M (0x0400) +#define IMASK_BUF9M (0x0200) +#define IMASK_BUF8M (0x0100) +#define IMASK_BUF7M (0x0080) +#define IMASK_BUF6M (0x0040) +#define IMASK_BUF5M (0x0020) +#define IMASK_BUF4M (0x0010) +#define IMASK_BUF3M (0x0008) +#define IMASK_BUF2M (0x0004) +#define IMASK_BUF1M (0x0002) +#define IMASK_BUF0M (0x0001) +#define IMASK_BUFnM(x) (0x1<<(x)) +#define IMASK_BUFF_ENABLE_ALL (0x1111) +#define IMASK_BUFF_DISABLE_ALL (0x0000) + +/* + * Interrupt Flag Register + */ +#define IFLAG_BUF15M (0x8000) +#define IFLAG_BUF14M (0x4000) +#define IFLAG_BUF13M (0x2000) +#define IFLAG_BUF12M (0x1000) +#define IFLAG_BUF11M (0x0800) +#define IFLAG_BUF10M (0x0400) +#define IFLAG_BUF9M (0x0200) +#define IFLAG_BUF8M (0x0100) +#define IFLAG_BUF7M (0x0080) +#define IFLAG_BUF6M (0x0040) +#define IFLAG_BUF5M (0x0020) +#define IFLAG_BUF4M (0x0010) +#define IFLAG_BUF3M (0x0008) +#define IFLAG_BUF2M (0x0004) +#define IFLAG_BUF1M (0x0002) +#define IFLAG_BUF0M (0x0001) +#define IFLAG_BUFF_SET_ALL (0xFFFF) +#define IFLAG_BUFF_CLEAR_ALL (0x0000) +#define IFLAG_BUFnM(x) (0x1<<(x)) + +/* + * Message Buffers + */ +#define MB_CNT_CODE(x) (((x)&0x0F)<<24) +#define MB_CNT_SRR (0x00400000) +#define MB_CNT_IDE (0x00200000) +#define MB_CNT_RTR (0x00100000) +#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) +#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) +#define MB_ID_STD(x) (((x)&0x07FF)<<18) +#define MB_ID_EXT(x) ((x)&0x3FFFF) + +/********************************************************************* + * + * Edge Port Module (EPORT) + * + *********************************************************************/ + +/* Register read/write macros */ +#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) +#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) +#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) +#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) +#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) +#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) + +/* Bit definitions and macros for MCF_EPORT_EPPAR */ +#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) +#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) +#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) +#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) +#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) +#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) +#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) +#define MCF_EPORT_EPPAR_LEVEL (0) +#define MCF_EPORT_EPPAR_RISING (1) +#define MCF_EPORT_EPPAR_FALLING (2) +#define MCF_EPORT_EPPAR_BOTH (3) +#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) +#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) +#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) +#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) +#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) +#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) +#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) +#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) +#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) +#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) +#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) +#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) +#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) +#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) +#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) +#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) +#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) +#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) +#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) +#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) +#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) +#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) + +/* Bit definitions and macros for MCF_EPORT_EPDDR */ +#define MCF_EPORT_EPDDR_EPDD1 (0x02) +#define MCF_EPORT_EPDDR_EPDD2 (0x04) +#define MCF_EPORT_EPDDR_EPDD3 (0x08) +#define MCF_EPORT_EPDDR_EPDD4 (0x10) +#define MCF_EPORT_EPDDR_EPDD5 (0x20) +#define MCF_EPORT_EPDDR_EPDD6 (0x40) +#define MCF_EPORT_EPDDR_EPDD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPIER */ +#define MCF_EPORT_EPIER_EPIE1 (0x02) +#define MCF_EPORT_EPIER_EPIE2 (0x04) +#define MCF_EPORT_EPIER_EPIE3 (0x08) +#define MCF_EPORT_EPIER_EPIE4 (0x10) +#define MCF_EPORT_EPIER_EPIE5 (0x20) +#define MCF_EPORT_EPIER_EPIE6 (0x40) +#define MCF_EPORT_EPIER_EPIE7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPDR */ +#define MCF_EPORT_EPDR_EPD1 (0x02) +#define MCF_EPORT_EPDR_EPD2 (0x04) +#define MCF_EPORT_EPDR_EPD3 (0x08) +#define MCF_EPORT_EPDR_EPD4 (0x10) +#define MCF_EPORT_EPDR_EPD5 (0x20) +#define MCF_EPORT_EPDR_EPD6 (0x40) +#define MCF_EPORT_EPDR_EPD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPPDR */ +#define MCF_EPORT_EPPDR_EPPD1 (0x02) +#define MCF_EPORT_EPPDR_EPPD2 (0x04) +#define MCF_EPORT_EPPDR_EPPD3 (0x08) +#define MCF_EPORT_EPPDR_EPPD4 (0x10) +#define MCF_EPORT_EPPDR_EPPD5 (0x20) +#define MCF_EPORT_EPPDR_EPPD6 (0x40) +#define MCF_EPORT_EPPDR_EPPD7 (0x80) + +/* Bit definitions and macros for MCF_EPORT_EPFR */ +#define MCF_EPORT_EPFR_EPF1 (0x02) +#define MCF_EPORT_EPFR_EPF2 (0x04) +#define MCF_EPORT_EPFR_EPF3 (0x08) +#define MCF_EPORT_EPFR_EPF4 (0x10) +#define MCF_EPORT_EPFR_EPF5 (0x20) +#define MCF_EPORT_EPFR_EPF6 (0x40) +#define MCF_EPORT_EPFR_EPF7 (0x80) + +/********************************************************************/ +#endif /* m532xsim_h */ diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h new file mode 100644 index 0000000..cc22c4a --- /dev/null +++ b/arch/m68k/include/asm/m5407sim.h @@ -0,0 +1,157 @@ +/****************************************************************************/ + +/* + * m5407sim.h -- ColdFire 5407 System Integration Module support. + * + * (C) Copyright 2000, Lineo (www.lineo.com) + * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. + * + * Modified by David W. Miller for the MCF5307 Eval Board. + */ + +/****************************************************************************/ +#ifndef m5407sim_h +#define m5407sim_h +/****************************************************************************/ + +/* + * Define the 5407 SIM register set addresses. + */ +#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ +#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ +#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ +#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ +#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ +#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ +#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ +#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ +#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ +#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ +#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ +#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ +#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ +#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ +#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ +#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ +#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ +#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ +#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ +#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ +#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ + +#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ +#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ +#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ +#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ +#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ +#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ + +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ +#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ +#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ +#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ +#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ +#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ +#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ +#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ +#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ +#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ +#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ +#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ +#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ + +#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ +#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ +#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ +#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ + +#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ + + +/* + * Some symbol defines for the above... + */ +#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ +#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ +#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ +#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ +#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ +#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ +#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ +#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ +#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ + +/* + * Macro to set IMR register. It is 32 bits on the 5407. + */ +#define mcf_getimr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) + +#define mcf_setimr(imr) \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); + +#define mcf_getipr() \ + *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) + + +/* + * Some symbol defines for the Parallel Port Pin Assignment Register + */ +#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ + /* Clear to select par I/O */ +#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ + /* Clear to select par I/O */ + +/* + * Defines for the IRQPAR Register + */ +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 + + +/* + * Define the Cache register flags. + */ +#define CACR_DEC 0x80000000 /* Enable data cache */ +#define CACR_DWP 0x40000000 /* Data write protection */ +#define CACR_DESB 0x20000000 /* Enable data store buffer */ +#define CACR_DDPI 0x10000000 /* Disable CPUSHL */ +#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ +#define CACR_DDCM_WT 0x00000000 /* Write through cache*/ +#define CACR_DDCM_CP 0x02000000 /* Copyback cache */ +#define CACR_DDCM_P 0x04000000 /* No cache, precise */ +#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ +#define CACR_DCINVA 0x01000000 /* Invalidate data cache */ +#define CACR_BEC 0x00080000 /* Enable branch cache */ +#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ +#define CACR_IEC 0x00008000 /* Enable instruction cache */ +#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ +#define CACR_IDPI 0x00001000 /* Disable CPUSHL */ +#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ +#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ +#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ + +#define ACR_BASE_POS 24 /* Address Base */ +#define ACR_MASK_POS 16 /* Address Mask */ +#define ACR_ENABLE 0x00008000 /* Enable address */ +#define ACR_USER 0x00000000 /* User mode access only */ +#define ACR_SUPER 0x00002000 /* Supervisor mode only */ +#define ACR_ANY 0x00004000 /* Match any access mode */ +#define ACR_CM_WT 0x00000000 /* Write through mode */ +#define ACR_CM_CP 0x00000020 /* Copyback mode */ +#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ +#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ +#define ACR_WPROTECT 0x00000004 /* Write protect */ + +/****************************************************************************/ +#endif /* m5407sim_h */ diff --git a/arch/m68k/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h new file mode 100644 index 0000000..eb7d39e --- /dev/null +++ b/arch/m68k/include/asm/m68360.h @@ -0,0 +1,13 @@ +#include "m68360_regs.h" +#include "m68360_pram.h" +#include "m68360_quicc.h" +#include "m68360_enet.h" + +#ifdef CONFIG_M68360 + +#define CPM_INTERRUPT 4 + +/* see MC68360 User's Manual, p. 7-377 */ +#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ + +#endif /* CONFIG_M68360 */ diff --git a/arch/m68k/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h new file mode 100644 index 0000000..c36f4d0 --- /dev/null +++ b/arch/m68k/include/asm/m68360_enet.h @@ -0,0 +1,177 @@ +/*********************************** + * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions for the ETHERNET controllers + *************************************** + */ + +#ifndef __ETHER_H +#define __ETHER_H + +#include "quicc_simple.h" + +/* + * transmit BD's + */ +#define T_R 0x8000 /* ready bit */ +#define E_T_PAD 0x4000 /* short frame padding */ +#define T_W 0x2000 /* wrap bit */ +#define T_I 0x1000 /* interrupt on completion */ +#define T_L 0x0800 /* last in frame */ +#define T_TC 0x0400 /* transmit CRC (when last) */ + +#define T_DEF 0x0200 /* defer indication */ +#define T_HB 0x0100 /* heartbeat */ +#define T_LC 0x0080 /* error: late collision */ +#define T_RL 0x0040 /* error: retransmission limit */ +#define T_RC 0x003c /* retry count */ +#define T_UN 0x0002 /* error: underrun */ +#define T_CSL 0x0001 /* carier sense lost */ +#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) + +/* + * receive BD's + */ +#define R_E 0x8000 /* buffer empty */ +#define R_W 0x2000 /* wrap bit */ +#define R_I 0x1000 /* interrupt on reception */ +#define R_L 0x0800 /* last BD in frame */ +#define R_F 0x0400 /* first BD in frame */ +#define R_M 0x0100 /* received because of promisc. mode */ + +#define R_LG 0x0020 /* frame too long */ +#define R_NO 0x0010 /* non-octet aligned */ +#define R_SH 0x0008 /* short frame */ +#define R_CR 0x0004 /* receive CRC error */ +#define R_OV 0x0002 /* receive overrun */ +#define R_CL 0x0001 /* collision */ +#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) + + +/* + * ethernet interrupts + */ +#define ETHERNET_GRA 0x0080 /* graceful stop complete */ +#define ETHERNET_TXE 0x0010 /* transmit error */ +#define ETHERNET_RXF 0x0008 /* receive frame */ +#define ETHERNET_BSY 0x0004 /* busy condition */ +#define ETHERNET_TXB 0x0002 /* transmit buffer */ +#define ETHERNET_RXB 0x0001 /* receive buffer */ + +/* + * ethernet protocol specific mode register (PSMR) + */ +#define ETHER_HBC 0x8000 /* heartbeat checking */ +#define ETHER_FC 0x4000 /* force collision */ +#define ETHER_RSH 0x2000 /* receive short frames */ +#define ETHER_IAM 0x1000 /* individual address mode */ +#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ +#define ETHER_PRO 0x0200 /* promiscuous */ +#define ETHER_BRO 0x0100 /* broadcast address */ +#define ETHER_SBT 0x0080 /* stop backoff timer */ +#define ETHER_LPB 0x0040 /* Loop Back Mode */ +#define ETHER_SIP 0x0020 /* sample input pins */ +#define ETHER_LCW 0x0010 /* late collision window */ +#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ +#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ +#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ +#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ +#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ +#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ +#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ +#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ + +/* + * ethernet specific parameters + */ +#define CRC_WORD 4 /* Length in bytes of CRC */ +#define C_PRES 0xffffffff /* preform 32 bit CRC */ +#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ +#define CRCEC 0x00000000 +#define ALEC 0x00000000 +#define DISFC 0x00000000 +#define PADS 0x00000000 +#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ +#define ETH_MFLR 0x05ee /* 1518 max frame size */ +#define MINFLR 0x0040 /* Minimum frame size 64 */ +#define MAXD1 0x05ee /* Max dma count 1518 */ +#define MAXD2 0x05ee +#define GADDR1 0x00000000 /* Clear group address */ +#define GADDR2 0x00000000 +#define GADDR3 0x00000000 +#define GADDR4 0x00000000 +#define P_PER 0x00000000 /*not used */ +#define IADDR1 0x00000000 /* Individual hash table not used */ +#define IADDR2 0x00000000 +#define IADDR3 0x00000000 +#define IADDR4 0x00000000 +#define TADDR_H 0x00000000 /* clear this regs */ +#define TADDR_M 0x00000000 +#define TADDR_L 0x00000000 + +/* SCC Parameter Ram */ +#define RFCR 0x18 /* normal operation */ +#define TFCR 0x18 /* normal operation */ +#define E_MRBLR 1518 /* Max ethernet frame length */ + +/* + * ethernet specific structure + */ +typedef union { + unsigned char b[6]; + struct { + unsigned short high; + unsigned short middl; + unsigned short low; + } w; +} ETHER_ADDR; + +typedef struct { + int max_frame_length; + int promisc_mode; + int reject_broadcast; + ETHER_ADDR phys_adr; +} ETHER_SPECIFIC; + +typedef struct { + ETHER_ADDR dst_addr; + ETHER_ADDR src_addr; + unsigned short type_or_len; + unsigned char data[1]; +} ETHER_FRAME; + +#define MAX_DATALEN 1500 +typedef struct { + ETHER_ADDR dst_addr; + ETHER_ADDR src_addr; + unsigned short type_or_len; + unsigned char data[MAX_DATALEN]; + unsigned char fcs[CRC_WORD]; +} ETHER_MAX_FRAME; + + +/* + * Internal ethernet function prototypes + */ +void ether_interrupt(int scc_num); +/* mleslie: debug */ +/* static void ethernet_rx_internal(int scc_num); */ +/* static void ethernet_tx_internal(int scc_num); */ + +/* + * User callable routines prototypes (ethernet specific) + */ +void ethernet_init(int scc_number, + alloc_routine *alloc_buffer, + free_routine *free_buffer, + store_rx_buffer_routine *store_rx_buffer, + handle_tx_error_routine *handle_tx_error, + handle_rx_error_routine *handle_rx_error, + handle_lost_error_routine *handle_lost_error, + ETHER_SPECIFIC *ether_spec); +int ethernet_tx(int scc_number, void *buf, int length); + +#endif + diff --git a/arch/m68k/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h new file mode 100644 index 0000000..e6088bb --- /dev/null +++ b/arch/m68k/include/asm/m68360_pram.h @@ -0,0 +1,431 @@ +/*********************************** + * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of the parameter area RAM. + * Note that different structures are overlaid + * at the same offsets for the different modes + * of operation. + *************************************** + */ + +#ifndef __PRAM_H +#define __PRAM_H + +/* Time slot assignment table */ +#define VALID_SLOT 0x8000 +#define WRAP_SLOT 0x4000 + +/***************************************************************** + Global Multichannel parameter RAM +*****************************************************************/ +struct global_multi_pram { + /* + * Global Multichannel parameter RAM + */ + unsigned long mcbase; /* Multichannel Base pointer */ + unsigned short qmcstate; /* Multichannel Controller state */ + unsigned short mrblr; /* Maximum Receive Buffer Length */ + unsigned short tx_s_ptr; /* TSTATx Pointer */ + unsigned short rxptr; /* Current Time slot entry in TSATRx */ + unsigned short grfthr; /* Global Receive frame threshold */ + unsigned short grfcnt; /* Global Receive Frame Count */ + unsigned long intbase; /* Multichannel Base address */ + unsigned long iintptr; /* Pointer to interrupt queue */ + unsigned short rx_s_ptr; /* TSTARx Pointer */ + + unsigned short txptr; /* Current Time slot entry in TSATTx */ + unsigned long c_mask32; /* CRC Constant (debb20e3) */ + unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ + unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ + unsigned short c_mask16; /* CRC Constant (f0b8) */ +}; + +/***************************************************************** + Quicc32 HDLC parameter RAM +*****************************************************************/ +struct quicc32_pram { + + unsigned short tbase; /* Tx Buffer Descriptors Base Address */ + unsigned short chamr; /* Channel Mode Register */ + unsigned long tstate; /* Tx Internal State */ + unsigned long txintr; /* Tx Internal Data Pointer */ + unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ + unsigned short txcntr; /* Tx Internal Byte Count */ + unsigned long tupack; /* (Tx Temp) */ + unsigned long zistate; /* Zero Insertion machine state */ + unsigned long tcrc; /* Temp Transmit CRC */ + unsigned short intmask; /* Channel's interrupt mask flags */ + unsigned short bdflags; + unsigned short rbase; /* Rx Buffer Descriptors Base Address */ + unsigned short mflr; /* Max Frame Length Register */ + unsigned long rstate; /* Rx Internal State */ + unsigned long rxintr; /* Rx Internal Data Pointer */ + unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ + unsigned short rxbyc; /* Rx Internal Byte Count */ + unsigned long rpack; /* (Rx Temp) */ + unsigned long zdstate; /* Zero Deletion machine state */ + unsigned long rcrc; /* Temp Transmit CRC */ + unsigned short maxc; /* Max_length counter */ + unsigned short tmp_mb; /* Temp */ +}; + + +/***************************************************************** + HDLC parameter RAM +*****************************************************************/ + +struct hdlc_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * HDLC specific parameter RAM + */ + unsigned char RESERVED1[4]; /* Reserved area */ + unsigned long c_mask; /* CRC constant */ + unsigned long c_pres; /* CRC preset */ + unsigned short disfc; /* discarded frame counter */ + unsigned short crcec; /* CRC error counter */ + unsigned short abtsc; /* abort sequence counter */ + unsigned short nmarc; /* nonmatching address rx cnt */ + unsigned short retrc; /* frame retransmission cnt */ + unsigned short mflr; /* maximum frame length reg */ + unsigned short max_cnt; /* maximum length counter */ + unsigned short rfthr; /* received frames threshold */ + unsigned short rfcnt; /* received frames count */ + unsigned short hmask; /* user defined frm addr mask */ + unsigned short haddr1; /* user defined frm address 1 */ + unsigned short haddr2; /* user defined frm address 2 */ + unsigned short haddr3; /* user defined frm address 3 */ + unsigned short haddr4; /* user defined frm address 4 */ + unsigned short tmp; /* temp */ + unsigned short tmp_mb; /* temp */ +}; + + + +/***************************************************************** + UART parameter RAM +*****************************************************************/ + +/* + * bits in uart control characters table + */ +#define CC_INVALID 0x8000 /* control character is valid */ +#define CC_REJ 0x4000 /* don't store char in buffer */ +#define CC_CHAR 0x00ff /* control character */ + +/* UART */ +struct uart_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rx_temp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * UART specific parameter RAM + */ + unsigned char RESERVED1[8]; /* Reserved area */ + unsigned short max_idl; /* maximum idle characters */ + unsigned short idlc; /* rx idle counter (internal) */ + unsigned short brkcr; /* break count register */ + + unsigned short parec; /* Rx parity error counter */ + unsigned short frmer; /* Rx framing error counter */ + unsigned short nosec; /* Rx noise counter */ + unsigned short brkec; /* Rx break character counter */ + unsigned short brkln; /* Reaceive break length */ + + unsigned short uaddr1; /* address character 1 */ + unsigned short uaddr2; /* address character 2 */ + unsigned short rtemp; /* temp storage */ + unsigned short toseq; /* Tx out of sequence char */ + unsigned short cc[8]; /* Rx control characters */ + unsigned short rccm; /* Rx control char mask */ + unsigned short rccr; /* Rx control char register */ + unsigned short rlbc; /* Receive last break char */ +}; + + + +/***************************************************************** + BISYNC parameter RAM +*****************************************************************/ + +struct bisync_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * BISYNC specific parameter RAM + */ + unsigned char RESERVED1[4]; /* Reserved area */ + unsigned long crcc; /* CRC Constant Temp Value */ + unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ + unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ + unsigned short parec; /* Receive Parity Error Counter */ + unsigned short bsync; /* BISYNC SYNC Character */ + unsigned short bdle; /* BISYNC DLE Character */ + unsigned short cc[8]; /* Rx control characters */ + unsigned short rccm; /* Receive Control Character Mask */ +}; + +/***************************************************************** + IOM2 parameter RAM + (overlaid on tx bd[5] of SCC channel[2]) +*****************************************************************/ +struct iom2_pram { + unsigned short ci_data; /* ci data */ + unsigned short monitor_data; /* monitor data */ + unsigned short tstate; /* transmitter state */ + unsigned short rstate; /* receiver state */ +}; + +/***************************************************************** + SPI/SMC parameter RAM + (overlaid on tx bd[6,7] of SCC channel[2]) +*****************************************************************/ + +#define SPI_R 0x8000 /* Ready bit in BD */ + +struct spi_pram { + unsigned short rbase; /* Rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ +}; + +struct smc_uart_pram { + unsigned short rbase; /* Rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned short max_idl; /* Maximum IDLE Characters */ + unsigned short idlc; /* Temporary IDLE Counter */ + unsigned short brkln; /* Last Rx Break Length */ + unsigned short brkec; /* Rx Break Condition Counter */ + unsigned short brkcr; /* Break Count Register (Tx) */ + unsigned short r_mask; /* Temporary bit mask */ +}; + +struct smc_trnsp_pram { + unsigned short rbase; /* rx BD Base Address */ + unsigned short tbase; /* Tx BD Base Address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned short reserved[5]; /* Reserved */ +}; + +struct idma_pram { + unsigned short ibase; /* IDMA BD Base Address */ + unsigned short ibptr; /* IDMA buffer descriptor pointer */ + unsigned long istate; /* IDMA internal state */ + unsigned long itemp; /* IDMA temp */ +}; + +struct ethernet_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * ETHERNET specific parameter RAM + */ + unsigned long c_pres; /* preset CRC */ + unsigned long c_mask; /* constant mask for CRC */ + unsigned long crcec; /* CRC error counter */ + unsigned long alec; /* alighnment error counter */ + unsigned long disfc; /* discard frame counter */ + unsigned short pads; /* short frame PAD characters */ + unsigned short ret_lim; /* retry limit threshold */ + unsigned short ret_cnt; /* retry limit counter */ + unsigned short mflr; /* maximum frame length reg */ + unsigned short minflr; /* minimum frame length reg */ + unsigned short maxd1; /* maximum DMA1 length reg */ + unsigned short maxd2; /* maximum DMA2 length reg */ + unsigned short maxd; /* rx max DMA */ + unsigned short dma_cnt; /* rx dma counter */ + unsigned short max_b; /* max bd byte count */ + unsigned short gaddr1; /* group address filter 1 */ + unsigned short gaddr2; /* group address filter 2 */ + unsigned short gaddr3; /* group address filter 3 */ + unsigned short gaddr4; /* group address filter 4 */ + unsigned long tbuf0_data0; /* save area 0 - current frm */ + unsigned long tbuf0_data1; /* save area 1 - current frm */ + unsigned long tbuf0_rba0; + unsigned long tbuf0_crc; + unsigned short tbuf0_bcnt; + union { + unsigned char b[6]; + struct { + unsigned short high; + unsigned short middl; + unsigned short low; + } w; + } paddr; + unsigned short p_per; /* persistence */ + unsigned short rfbd_ptr; /* rx first bd pointer */ + unsigned short tfbd_ptr; /* tx first bd pointer */ + unsigned short tlbd_ptr; /* tx last bd pointer */ + unsigned long tbuf1_data0; /* save area 0 - next frame */ + unsigned long tbuf1_data1; /* save area 1 - next frame */ + unsigned long tbuf1_rba0; + unsigned long tbuf1_crc; + unsigned short tbuf1_bcnt; + unsigned short tx_len; /* tx frame length counter */ + unsigned short iaddr1; /* individual address filter 1*/ + unsigned short iaddr2; /* individual address filter 2*/ + unsigned short iaddr3; /* individual address filter 3*/ + unsigned short iaddr4; /* individual address filter 4*/ + unsigned short boff_cnt; /* back-off counter */ + unsigned short taddr_h; /* temp address (MSB) */ + unsigned short taddr_m; /* temp address */ + unsigned short taddr_l; /* temp address (LSB) */ +}; + +struct transparent_pram { + /* + * SCC parameter RAM + */ + unsigned short rbase; /* RX BD base address */ + unsigned short tbase; /* TX BD base address */ + unsigned char rfcr; /* Rx function code */ + unsigned char tfcr; /* Tx function code */ + unsigned short mrblr; /* Rx buffer length */ + unsigned long rstate; /* Rx internal state */ + unsigned long rptr; /* Rx internal data pointer */ + unsigned short rbptr; /* rb BD Pointer */ + unsigned short rcount; /* Rx internal byte count */ + unsigned long rtemp; /* Rx temp */ + unsigned long tstate; /* Tx internal state */ + unsigned long tptr; /* Tx internal data pointer */ + unsigned short tbptr; /* Tx BD pointer */ + unsigned short tcount; /* Tx byte count */ + unsigned long ttemp; /* Tx temp */ + unsigned long rcrc; /* temp receive CRC */ + unsigned long tcrc; /* temp transmit CRC */ + + /* + * TRANSPARENT specific parameter RAM + */ + unsigned long crc_p; /* CRC Preset */ + unsigned long crc_c; /* CRC constant */ +}; + +struct timer_pram { + /* + * RISC timers parameter RAM + */ + unsigned short tm_base; /* RISC timer table base adr */ + unsigned short tm_ptr; /* RISC timer table pointer */ + unsigned short r_tmr; /* RISC timer mode register */ + unsigned short r_tmv; /* RISC timer valid register */ + unsigned long tm_cmd; /* RISC timer cmd register */ + unsigned long tm_cnt; /* RISC timer internal cnt */ +}; + +#endif diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h new file mode 100644 index 0000000..6d40f4d --- /dev/null +++ b/arch/m68k/include/asm/m68360_quicc.h @@ -0,0 +1,362 @@ +/*********************************** + * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of QUICC memory structures + *************************************** + */ + +#ifndef __M68360_QUICC_H +#define __M68360_QUICC_H + +/* + * include registers and + * parameter ram definitions files + */ +#include +#include + + + +/* Buffer Descriptors */ +typedef struct quicc_bd { + volatile unsigned short status; + volatile unsigned short length; + volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ +} QUICC_BD; + + +#ifdef MOTOROLA_ORIGINAL +struct user_data { + /* BASE + 0x000: user data memory */ + volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ + volatile unsigned char udata_bd[0x200]; /*user data Ucode */ + volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ + volatile unsigned char RESERVED1[0x500]; /* Reserved area */ +}; +#else +struct user_data { + /* BASE + 0x000: user data memory */ + volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ + volatile unsigned char udata_bd1[0x200]; /* user, bds */ + volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ + volatile unsigned char udata_bd2[0x100]; /* user, bds */ + volatile unsigned char RESERVED1[0x400]; /* Reserved area */ +}; +#endif + + +/* + * internal ram + */ +typedef struct quicc { + union { + struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ + struct user_data u; + }ch_or_u; /* multipul or user space */ + + /* BASE + 0xc00: PARAMETER RAM */ + union { + struct scc_pram { + union { + struct hdlc_pram h; + struct uart_pram u; + struct bisync_pram b; + struct transparent_pram t; + unsigned char RESERVED66[0x70]; + } pscc; /* scc parameter area (protocol dependent) */ + union { + struct { + unsigned char RESERVED70[0x10]; + struct spi_pram spi; + unsigned char RESERVED72[0x8]; + struct timer_pram timer; + } timer_spi; + struct { + struct idma_pram idma; + unsigned char RESERVED67[0x4]; + union { + struct smc_uart_pram u; + struct smc_trnsp_pram t; + } psmc; + } idma_smc; + } pothers; + } scc; + struct ethernet_pram enet_scc; + struct global_multi_pram m; + unsigned char pr[0x100]; + } pram[4]; + + /* reserved */ + + /* BASE + 0x1000: INTERNAL REGISTERS */ + /* SIM */ + volatile unsigned long sim_mcr; /* module configuration reg */ + volatile unsigned short sim_simtr; /* module test register */ + volatile unsigned char RESERVED2[0x2]; /* Reserved area */ + volatile unsigned char sim_avr; /* auto vector reg */ + volatile unsigned char sim_rsr; /* reset status reg */ + volatile unsigned char RESERVED3[0x2]; /* Reserved area */ + volatile unsigned char sim_clkocr; /* CLCO control register */ + volatile unsigned char RESERVED62[0x3]; /* Reserved area */ + volatile unsigned short sim_pllcr; /* PLL control register */ + volatile unsigned char RESERVED63[0x2]; /* Reserved area */ + volatile unsigned short sim_cdvcr; /* Clock devider control register */ + volatile unsigned short sim_pepar; /* Port E pin assignment register */ + volatile unsigned char RESERVED64[0xa]; /* Reserved area */ + volatile unsigned char sim_sypcr; /* system protection control*/ + volatile unsigned char sim_swiv; /* software interrupt vector*/ + volatile unsigned char RESERVED6[0x2]; /* Reserved area */ + volatile unsigned short sim_picr; /* periodic interrupt control reg */ + volatile unsigned char RESERVED7[0x2]; /* Reserved area */ + volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ + volatile unsigned char RESERVED8[0x3]; /* Reserved area */ + volatile unsigned char sim_swsr; /* software service */ + volatile unsigned long sim_bkar; /* breakpoint address register*/ + volatile unsigned long sim_bkcr; /* breakpoint control register*/ + volatile unsigned char RESERVED10[0x8]; /* Reserved area */ + /* MEMC */ + volatile unsigned long memc_gmr; /* Global memory register */ + volatile unsigned short memc_mstat; /* MEMC status register */ + volatile unsigned char RESERVED11[0xa]; /* Reserved area */ + volatile unsigned long memc_br0; /* base register 0 */ + volatile unsigned long memc_or0; /* option register 0 */ + volatile unsigned char RESERVED12[0x8]; /* Reserved area */ + volatile unsigned long memc_br1; /* base register 1 */ + volatile unsigned long memc_or1; /* option register 1 */ + volatile unsigned char RESERVED13[0x8]; /* Reserved area */ + volatile unsigned long memc_br2; /* base register 2 */ + volatile unsigned long memc_or2; /* option register 2 */ + volatile unsigned char RESERVED14[0x8]; /* Reserved area */ + volatile unsigned long memc_br3; /* base register 3 */ + volatile unsigned long memc_or3; /* option register 3 */ + volatile unsigned char RESERVED15[0x8]; /* Reserved area */ + volatile unsigned long memc_br4; /* base register 3 */ + volatile unsigned long memc_or4; /* option register 3 */ + volatile unsigned char RESERVED16[0x8]; /* Reserved area */ + volatile unsigned long memc_br5; /* base register 3 */ + volatile unsigned long memc_or5; /* option register 3 */ + volatile unsigned char RESERVED17[0x8]; /* Reserved area */ + volatile unsigned long memc_br6; /* base register 3 */ + volatile unsigned long memc_or6; /* option register 3 */ + volatile unsigned char RESERVED18[0x8]; /* Reserved area */ + volatile unsigned long memc_br7; /* base register 3 */ + volatile unsigned long memc_or7; /* option register 3 */ + volatile unsigned char RESERVED9[0x28]; /* Reserved area */ + /* TEST */ + volatile unsigned short test_tstmra; /* master shift a */ + volatile unsigned short test_tstmrb; /* master shift b */ + volatile unsigned short test_tstsc; /* shift count */ + volatile unsigned short test_tstrc; /* repetition counter */ + volatile unsigned short test_creg; /* control */ + volatile unsigned short test_dreg; /* destributed register */ + volatile unsigned char RESERVED58[0x404]; /* Reserved area */ + /* IDMA1 */ + volatile unsigned short idma_iccr; /* channel configuration reg*/ + volatile unsigned char RESERVED19[0x2]; /* Reserved area */ + volatile unsigned short idma1_cmr; /* dma mode reg */ + volatile unsigned char RESERVED68[0x2]; /* Reserved area */ + volatile unsigned long idma1_sapr; /* dma source addr ptr */ + volatile unsigned long idma1_dapr; /* dma destination addr ptr */ + volatile unsigned long idma1_bcr; /* dma byte count reg */ + volatile unsigned char idma1_fcr; /* function code reg */ + volatile unsigned char RESERVED20; /* Reserved area */ + volatile unsigned char idma1_cmar; /* channel mask reg */ + volatile unsigned char RESERVED21; /* Reserved area */ + volatile unsigned char idma1_csr; /* channel status reg */ + volatile unsigned char RESERVED22[0x3]; /* Reserved area */ + /* SDMA */ + volatile unsigned char sdma_sdsr; /* status reg */ + volatile unsigned char RESERVED23; /* Reserved area */ + volatile unsigned short sdma_sdcr; /* configuration reg */ + volatile unsigned long sdma_sdar; /* address reg */ + /* IDMA2 */ + volatile unsigned char RESERVED69[0x2]; /* Reserved area */ + volatile unsigned short idma2_cmr; /* dma mode reg */ + volatile unsigned long idma2_sapr; /* dma source addr ptr */ + volatile unsigned long idma2_dapr; /* dma destination addr ptr */ + volatile unsigned long idma2_bcr; /* dma byte count reg */ + volatile unsigned char idma2_fcr; /* function code reg */ + volatile unsigned char RESERVED24; /* Reserved area */ + volatile unsigned char idma2_cmar; /* channel mask reg */ + volatile unsigned char RESERVED25; /* Reserved area */ + volatile unsigned char idma2_csr; /* channel status reg */ + volatile unsigned char RESERVED26[0x7]; /* Reserved area */ + /* Interrupt Controller */ + volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ + volatile unsigned long intr_cipr; /* CP interrupt pending reg */ + volatile unsigned long intr_cimr; /* CP interrupt mask reg */ + volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ + /* Parallel I/O */ + volatile unsigned short pio_padir; /* port A data direction reg */ + volatile unsigned short pio_papar; /* port A pin assignment reg */ + volatile unsigned short pio_paodr; /* port A open drain reg */ + volatile unsigned short pio_padat; /* port A data register */ + volatile unsigned char RESERVED28[0x8]; /* Reserved area */ + volatile unsigned short pio_pcdir; /* port C data direction reg*/ + volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ + volatile unsigned short pio_pcso; /* port C special options */ + volatile unsigned short pio_pcdat; /* port C data register */ + volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ + volatile unsigned char RESERVED29[0x16]; /* Reserved area */ + /* Timer */ + volatile unsigned short timer_tgcr; /* timer global configuration reg */ + volatile unsigned char RESERVED30[0xe]; /* Reserved area */ + volatile unsigned short timer_tmr1; /* timer 1 mode reg */ + volatile unsigned short timer_tmr2; /* timer 2 mode reg */ + volatile unsigned short timer_trr1; /* timer 1 referance reg */ + volatile unsigned short timer_trr2; /* timer 2 referance reg */ + volatile unsigned short timer_tcr1; /* timer 1 capture reg */ + volatile unsigned short timer_tcr2; /* timer 2 capture reg */ + volatile unsigned short timer_tcn1; /* timer 1 counter reg */ + volatile unsigned short timer_tcn2; /* timer 2 counter reg */ + volatile unsigned short timer_tmr3; /* timer 3 mode reg */ + volatile unsigned short timer_tmr4; /* timer 4 mode reg */ + volatile unsigned short timer_trr3; /* timer 3 referance reg */ + volatile unsigned short timer_trr4; /* timer 4 referance reg */ + volatile unsigned short timer_tcr3; /* timer 3 capture reg */ + volatile unsigned short timer_tcr4; /* timer 4 capture reg */ + volatile unsigned short timer_tcn3; /* timer 3 counter reg */ + volatile unsigned short timer_tcn4; /* timer 4 counter reg */ + volatile unsigned short timer_ter1; /* timer 1 event reg */ + volatile unsigned short timer_ter2; /* timer 2 event reg */ + volatile unsigned short timer_ter3; /* timer 3 event reg */ + volatile unsigned short timer_ter4; /* timer 4 event reg */ + volatile unsigned char RESERVED34[0x8]; /* Reserved area */ + /* CP */ + volatile unsigned short cp_cr; /* command register */ + volatile unsigned char RESERVED35[0x2]; /* Reserved area */ + volatile unsigned short cp_rccr; /* main configuration reg */ + volatile unsigned char RESERVED37; /* Reserved area */ + volatile unsigned char cp_rmds; /* development support status reg */ + volatile unsigned long cp_rmdr; /* development support control reg */ + volatile unsigned short cp_rctr1; /* ram break register 1 */ + volatile unsigned short cp_rctr2; /* ram break register 2 */ + volatile unsigned short cp_rctr3; /* ram break register 3 */ + volatile unsigned short cp_rctr4; /* ram break register 4 */ + volatile unsigned char RESERVED59[0x2]; /* Reserved area */ + volatile unsigned short cp_rter; /* RISC timers event reg */ + volatile unsigned char RESERVED38[0x2]; /* Reserved area */ + volatile unsigned short cp_rtmr; /* RISC timers mask reg */ + volatile unsigned char RESERVED39[0x14]; /* Reserved area */ + /* BRG */ + union { + volatile unsigned long l; + struct { + volatile unsigned short BRGC_RESERV:14; + volatile unsigned short rst:1; + volatile unsigned short en:1; + volatile unsigned short extc:2; + volatile unsigned short atb:1; + volatile unsigned short cd:12; + volatile unsigned short div16:1; + } b; + } brgc[4]; /* BRG1-BRG4 configuration regs*/ + /* SCC registers */ + struct scc_regs { + union { + struct { + /* Low word. */ + volatile unsigned short GSMR_RESERV2:1; + volatile unsigned short edge:2; + volatile unsigned short tci:1; + volatile unsigned short tsnc:2; + volatile unsigned short rinv:1; + volatile unsigned short tinv:1; + volatile unsigned short tpl:3; + volatile unsigned short tpp:2; + volatile unsigned short tend:1; + volatile unsigned short tdcr:2; + volatile unsigned short rdcr:2; + volatile unsigned short renc:3; + volatile unsigned short tenc:3; + volatile unsigned short diag:2; + volatile unsigned short enr:1; + volatile unsigned short ent:1; + volatile unsigned short mode:4; + /* High word. */ + volatile unsigned short GSMR_RESERV1:14; + volatile unsigned short pri:1; + volatile unsigned short gde:1; + volatile unsigned short tcrc:2; + volatile unsigned short revd:1; + volatile unsigned short trx:1; + volatile unsigned short ttx:1; + volatile unsigned short cdp:1; + volatile unsigned short ctsp:1; + volatile unsigned short cds:1; + volatile unsigned short ctss:1; + volatile unsigned short tfl:1; + volatile unsigned short rfw:1; + volatile unsigned short txsy:1; + volatile unsigned short synl:2; + volatile unsigned short rtsm:1; + volatile unsigned short rsyn:1; + } b; + struct { + volatile unsigned long low; + volatile unsigned long high; + } w; + } scc_gsmr; /* SCC general mode reg */ + volatile unsigned short scc_psmr; /* protocol specific mode reg */ + volatile unsigned char RESERVED42[0x2]; /* Reserved area */ + volatile unsigned short scc_todr; /* SCC transmit on demand */ + volatile unsigned short scc_dsr; /* SCC data sync reg */ + volatile unsigned short scc_scce; /* SCC event reg */ + volatile unsigned char RESERVED43[0x2];/* Reserved area */ + volatile unsigned short scc_sccm; /* SCC mask reg */ + volatile unsigned char RESERVED44[0x1];/* Reserved area */ + volatile unsigned char scc_sccs; /* SCC status reg */ + volatile unsigned char RESERVED45[0x8]; /* Reserved area */ + } scc_regs[4]; + /* SMC */ + struct smc_regs { + volatile unsigned char RESERVED46[0x2]; /* Reserved area */ + volatile unsigned short smc_smcmr; /* SMC mode reg */ + volatile unsigned char RESERVED60[0x2]; /* Reserved area */ + volatile unsigned char smc_smce; /* SMC event reg */ + volatile unsigned char RESERVED47[0x3]; /* Reserved area */ + volatile unsigned char smc_smcm; /* SMC mask reg */ + volatile unsigned char RESERVED48[0x5]; /* Reserved area */ + } smc_regs[2]; + /* SPI */ + volatile unsigned short spi_spmode; /* SPI mode reg */ + volatile unsigned char RESERVED51[0x4]; /* Reserved area */ + volatile unsigned char spi_spie; /* SPI event reg */ + volatile unsigned char RESERVED52[0x3]; /* Reserved area */ + volatile unsigned char spi_spim; /* SPI mask reg */ + volatile unsigned char RESERVED53[0x2]; /* Reserved area */ + volatile unsigned char spi_spcom; /* SPI command reg */ + volatile unsigned char RESERVED54[0x4]; /* Reserved area */ + /* PIP */ + volatile unsigned short pip_pipc; /* pip configuration reg */ + volatile unsigned char RESERVED65[0x2]; /* Reserved area */ + volatile unsigned short pip_ptpr; /* pip timing parameters reg */ + volatile unsigned long pip_pbdir; /* port b data direction reg */ + volatile unsigned long pip_pbpar; /* port b pin assignment reg */ + volatile unsigned long pip_pbodr; /* port b open drain reg */ + volatile unsigned long pip_pbdat; /* port b data reg */ + volatile unsigned char RESERVED71[0x18]; /* Reserved area */ + /* Serial Interface */ + volatile unsigned long si_simode; /* SI mode register */ + volatile unsigned char si_sigmr; /* SI global mode register */ + volatile unsigned char RESERVED55; /* Reserved area */ + volatile unsigned char si_sistr; /* SI status register */ + volatile unsigned char si_sicmr; /* SI command register */ + volatile unsigned char RESERVED56[0x4]; /* Reserved area */ + volatile unsigned long si_sicr; /* SI clock routing */ + volatile unsigned long si_sirp; /* SI ram pointers */ + volatile unsigned char RESERVED57[0xc]; /* Reserved area */ + volatile unsigned short si_siram[0x80]; /* SI routing ram */ +} QUICC; + +#endif + +/* + * Local variables: + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ diff --git a/arch/m68k/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h new file mode 100644 index 0000000..d57217c --- /dev/null +++ b/arch/m68k/include/asm/m68360_regs.h @@ -0,0 +1,408 @@ +/*********************************** + * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ + *********************************** + * + *************************************** + * Definitions of the QUICC registers + *************************************** + */ + +#ifndef __REGISTERS_H +#define __REGISTERS_H + +#define CLEAR_BIT(x, bit) x =bit + +/***************************************************************** + Command Register +*****************************************************************/ + +/* bit fields within command register */ +#define SOFTWARE_RESET 0x8000 +#define CMD_OPCODE 0x0f00 +#define CMD_CHANNEL 0x00f0 +#define CMD_FLAG 0x0001 + +/* general command opcodes */ +#define INIT_RXTX_PARAMS 0x0000 +#define INIT_RX_PARAMS 0x0100 +#define INIT_TX_PARAMS 0x0200 +#define ENTER_HUNT_MODE 0x0300 +#define STOP_TX 0x0400 +#define GR_STOP_TX 0x0500 +#define RESTART_TX 0x0600 +#define CLOSE_RX_BD 0x0700 +#define SET_ENET_GROUP 0x0800 +#define RESET_ENET_GROUP 0x0900 + +/* quicc32 CP commands */ +#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ +#define ENTER_HUNT_MODE_32 0x1e00 + +/* quicc32 mask/event SCC register */ +#define GOV 0x01 +#define GUN 0x02 +#define GINT 0x04 +#define IQOV 0x08 + + +/* Timer commands */ +#define SET_TIMER 0x0800 + +/* Multi channel Interrupt structure */ +#define INTR_VALID 0x8000 /* Valid interrupt entry */ +#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ +#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ +#define INTR_MASK_BITS 0x383f + +/* + * General SCC mode register (GSMR) + */ + +#define MODE_HDLC 0x0 +#define MODE_APPLE_TALK 0x2 +#define MODE_SS7 0x3 +#define MODE_UART 0x4 +#define MODE_PROFIBUS 0x5 +#define MODE_ASYNC_HDLC 0x6 +#define MODE_V14 0x7 +#define MODE_BISYNC 0x8 +#define MODE_DDCMP 0x9 +#define MODE_MULTI_CHANNEL 0xa +#define MODE_ETHERNET 0xc + +#define DIAG_NORMAL 0x0 +#define DIAG_LOCAL_LPB 0x1 +#define DIAG_AUTO_ECHO 0x2 +#define DIAG_LBP_ECHO 0x3 + +/* For RENC and TENC fields in GSMR */ +#define ENC_NRZ 0x0 +#define ENC_NRZI 0x1 +#define ENC_FM0 0x2 +#define ENC_MANCH 0x4 +#define ENC_DIFF_MANC 0x6 + +/* For TDCR and RDCR fields in GSMR */ +#define CLOCK_RATE_1 0x0 +#define CLOCK_RATE_8 0x1 +#define CLOCK_RATE_16 0x2 +#define CLOCK_RATE_32 0x3 + +#define TPP_00 0x0 +#define TPP_10 0x1 +#define TPP_01 0x2 +#define TPP_11 0x3 + +#define TPL_NO 0x0 +#define TPL_8 0x1 +#define TPL_16 0x2 +#define TPL_32 0x3 +#define TPL_48 0x4 +#define TPL_64 0x5 +#define TPL_128 0x6 + +#define TSNC_INFINITE 0x0 +#define TSNC_14_65 0x1 +#define TSNC_4_15 0x2 +#define TSNC_3_1 0x3 + +#define EDGE_BOTH 0x0 +#define EDGE_POS 0x1 +#define EDGE_NEG 0x2 +#define EDGE_NO 0x3 + +#define SYNL_NO 0x0 +#define SYNL_4 0x1 +#define SYNL_8 0x2 +#define SYNL_16 0x3 + +#define TCRC_CCITT16 0x0 +#define TCRC_CRC16 0x1 +#define TCRC_CCITT32 0x2 + + +/***************************************************************** + TODR (Transmit on demand) Register +*****************************************************************/ +#define TODR_TOD 0x8000 /* Transmit on demand */ + + +/***************************************************************** + CICR register settings +*****************************************************************/ + +/* note that relative irq priorities of the SCCs can be reordered + * if desired - see p. 7-377 of the MC68360UM */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ + +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + + +/***************************************************************** + Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) +*****************************************************************/ + +#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ +#define INTR_SCC1 0x40000000 /* SCC port 1 */ +#define INTR_SCC2 0x20000000 /* SCC port 2 */ +#define INTR_SCC3 0x10000000 /* SCC port 3 */ +#define INTR_SCC4 0x08000000 /* SCC port 4 */ +#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ +#define INTR_TIMER1 0x02000000 /* timer 1 */ +#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ +#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ +#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ +#define INTR_DMA1 0x00200000 /* idma 1 */ +#define INTR_DMA2 0x00100000 /* idma 2 */ +#define INTR_TIMER2 0x00040000 /* timer 2 */ +#define INTR_CP_TIMER 0x00020000 /* CP timer */ +#define INTR_PIP_STATUS 0x00010000 /* PIP status */ +#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ +#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ +#define INTR_TIMER3 0x00001000 /* timer 3 */ +#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ +#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ +#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ +#define INTR_TIMER4 0x00000080 /* timer 4 */ +#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ +#define INTR_SCP 0x00000020 /* SCP */ +#define INTR_SMC1 0x00000010 /* SMC 1 */ +#define INTR_SMC2 0x00000008 /* SMC 2 */ +#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ +#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ +#define INTR_ERR 0x00000001 /* error */ + + +/***************************************************************** + CPM Interrupt vector encodings (MC68360UM p. 7-376) +*****************************************************************/ + +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC0 0x1f +#define CPMVEC_SCC1 0x1e +#define CPMVEC_SCC2 0x1d +#define CPMVEC_SCC3 0x1c +#define CPMVEC_SCC4 0x1b +#define CPMVEC_PIO_PC1 0x1a +#define CPMVEC_TIMER1 0x19 +#define CPMVEC_PIO_PC2 0x18 +#define CPMVEC_PIO_PC3 0x17 +#define CPMVEC_SDMA_CB_ERR 0x16 +#define CPMVEC_IDMA1 0x15 +#define CPMVEC_IDMA2 0x14 +#define CPMVEC_RESERVED3 0x13 +#define CPMVEC_TIMER2 0x12 +#define CPMVEC_RISCTIMER 0x11 +#define CPMVEC_RESERVED2 0x10 +#define CPMVEC_PIO_PC4 0x0f +#define CPMVEC_PIO_PC5 0x0e +#define CPMVEC_TIMER3 0x0c +#define CPMVEC_PIO_PC6 0x0b +#define CPMVEC_PIO_PC7 0x0a +#define CPMVEC_PIO_PC8 0x09 +#define CPMVEC_RESERVED1 0x08 +#define CPMVEC_TIMER4 0x07 +#define CPMVEC_PIO_PC9 0x06 +#define CPMVEC_SPI 0x05 +#define CPMVEC_SMC1 0x04 +#define CPMVEC_SMC2 0x03 +#define CPMVEC_PIO_PC10 0x02 +#define CPMVEC_PIO_PC11 0x01 +#define CPMVEC_ERROR 0x00 + +/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ +/* #define CPMVEC_SCC1 ((ushort)0x1e) */ +/* #define CPMVEC_SCC2 ((ushort)0x1d) */ +/* #define CPMVEC_SCC3 ((ushort)0x1c) */ +/* #define CPMVEC_SCC4 ((ushort)0x1b) */ +/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ +/* #define CPMVEC_TIMER1 ((ushort)0x19) */ +/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ +/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ +/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ +/* #define CPMVEC_IDMA1 ((ushort)0x15) */ +/* #define CPMVEC_IDMA2 ((ushort)0x14) */ +/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ +/* #define CPMVEC_TIMER2 ((ushort)0x12) */ +/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ +/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ +/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ +/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ +/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ +/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ +/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ +/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ +/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ +/* #define CPMVEC_TIMER4 ((ushort)0x07) */ +/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ +/* #define CPMVEC_SPI ((ushort)0x05) */ +/* #define CPMVEC_SMC1 ((ushort)0x04) */ +/* #define CPMVEC_SMC2 ((ushort)0x03) */ +/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ +/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ +/* #define CPMVEC_ERROR ((ushort)0x00) */ + + +/***************************************************************** + * PIO control registers + *****************************************************************/ + +/* Port A - See 360UM p. 7-358 + * + * Note that most of these pins have alternate functions + */ + + +/* The macros are nice, but there are all sorts of references to 1-indexed + * facilities on the 68360... */ +/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ +/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ + +#define PA_RXD1 ((ushort)0x0001) +#define PA_TXD1 ((ushort)0x0002) +#define PA_RXD2 ((ushort)0x0004) +#define PA_TXD2 ((ushort)0x0008) +#define PA_RXD3 ((ushort)0x0010) +#define PA_TXD3 ((ushort)0x0020) +#define PA_RXD4 ((ushort)0x0040) +#define PA_TXD4 ((ushort)0x0080) + +#define PA_CLK1 ((ushort)0x0100) +#define PA_CLK2 ((ushort)0x0200) +#define PA_CLK3 ((ushort)0x0400) +#define PA_CLK4 ((ushort)0x0800) +#define PA_CLK5 ((ushort)0x1000) +#define PA_CLK6 ((ushort)0x2000) +#define PA_CLK7 ((ushort)0x4000) +#define PA_CLK8 ((ushort)0x8000) + + +/* Port B - See 360UM p. 7-362 + */ + + +/* Port C - See 360UM p. 7-365 + */ + +#define PC_RTS1 ((ushort)0x0001) +#define PC_RTS2 ((ushort)0x0002) +#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ +#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ + +#define PC_CTS1 ((ushort)0x0010) +#define PC_CD1 ((ushort)0x0020) +#define PC_CTS2 ((ushort)0x0040) +#define PC_CD2 ((ushort)0x0080) +#define PC_CTS3 ((ushort)0x0100) +#define PC_CD3 ((ushort)0x0200) +#define PC_CTS4 ((ushort)0x0400) +#define PC_CD4 ((ushort)0x0800) + + + +/***************************************************************** + chip select option register +*****************************************************************/ +#define DTACK 0xe000 +#define ADR_MASK 0x1ffc +#define RDWR_MASK 0x0002 +#define FC_MASK 0x0001 + +/***************************************************************** + tbase and rbase registers +*****************************************************************/ +#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) +#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) +#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) +#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ + (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) +#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ + ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) +#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ + ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) +#define INCREASE_TBD(bd,quicc,pram) { \ + if((bd)->status & T_W) \ + (bd) = TBD_ADDR(quicc,pram); \ + else \ + (bd)++; \ +} +#define DECREASE_TBD(bd,quicc,pram) { \ + if ((bd) == TBD_ADDR(quicc, pram)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} +#define INCREASE_RBD(bd,quicc,pram) { \ + if((bd)->status & R_W) \ + (bd) = RBD_ADDR(quicc,pram); \ + else \ + (bd)++; \ +} +#define DECREASE_RBD(bd,quicc,pram) { \ + if ((bd) == RBD_ADDR(quicc, pram)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} + +/***************************************************************** + Macros for Multi channel +*****************************************************************/ +#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) +#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) +#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ + (&(quicc->ch_or_u.ch_pram_tbl[channel]))) +#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) +#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) +#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) +#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ + (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) +#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ + CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ + ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) +#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ + CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ + ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) + +#define INCREASE_TBD_32(bd,quicc,page,channel) { \ + if((bd)->status & T_W) \ + (bd) = TBD_32_ADDR(quicc,page,channel); \ + else \ + (bd)++; \ +} +#define DECREASE_TBD_32(bd,quicc,page,channel) { \ + if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} +#define INCREASE_RBD_32(bd,quicc,page,channel) { \ + if((bd)->status & R_W) \ + (bd) = RBD_32_ADDR(quicc,page,channel); \ + else \ + (bd)++; \ +} +#define DECREASE_RBD_32(bd,quicc,page,channel) { \ + if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ + while (!((bd)->status & T_W)) \ + (bd)++; \ + else \ + (bd)--; \ +} + +#endif diff --git a/arch/m68k/include/asm/mac_asc.h b/arch/m68k/include/asm/mac_asc.h new file mode 100644 index 0000000..fc2e546 --- /dev/null +++ b/arch/m68k/include/asm/mac_asc.h @@ -0,0 +1,27 @@ +/* + * Apple Sound Chip + */ + +#ifndef __ASM_MAC_ASC_H +#define __ASM_MAC_ASC_H + +/* + * ASC offsets and controls + */ + +#define ASC_BUF_BASE 0x00 /* RAM buffer offset */ +#define ASC_BUF_SIZE 0x800 + +#define ASC_CONTROL 0x800 +#define ASC_CONTROL_OFF 0x00 +#define ASC_FREQ(chan,byte) ((0x810)+((chan)<<3)+(byte)) +#define ASC_ENABLE 0x801 +#define ASC_ENABLE_SAMPLE 0x02 +#define ASC_MODE 0x802 +#define ASC_MODE_SAMPLE 0x02 + +#define ASC_VOLUME 0x806 +#define ASC_CHAN 0x807 /* ??? */ + + +#endif diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h new file mode 100644 index 0000000..c2a042b --- /dev/null +++ b/arch/m68k/include/asm/mac_baboon.h @@ -0,0 +1,32 @@ +/* + * Definitions for the "Baboon" custom IC on the PowerBook 190. + */ + +#define BABOON_BASE (0x50F1A000) /* same as IDE controller base */ + +#ifndef __ASSEMBLY__ + +struct baboon { + char pad1[208]; /* generic IDE registers, not used here */ + short mb_control; /* Control register: + * bit 5 : slot 2 power control + * bit 6 : slot 1 power control + */ + char pad2[2]; + short mb_status; /* (0xD4) media bay status register: + * + * bit 0: ???? + * bit 1: IDE interrupt active? + * bit 2: bay status, 0 = full, 1 = empty + * bit 3: ???? + */ + char pad3[2]; /* (0xD6) not used */ + short mb_ifr; /* (0xD8) media bay interrupt flags register: + * + * bit 0: ???? + * bit 1: IDE controller interrupt + * bit 2: media bay status change interrupt + */ +}; + +#endif /* __ASSEMBLY **/ diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h new file mode 100644 index 0000000..a2c7e6f --- /dev/null +++ b/arch/m68k/include/asm/mac_iop.h @@ -0,0 +1,162 @@ +/* + * I/O Processor (IOP) defines and structures, mostly snagged from A/UX + * header files. + * + * The original header from which this was taken is copyrighted. I've done some + * rewriting (in fact my changes make this a bit more readable, IMHO) but some + * more should be done. + */ + +/* + * This is the base address of the IOPs. Use this as the address of + * a "struct iop" (see below) to see where the actual registers fall. + */ + +#define SCC_IOP_BASE_IIFX (0x50F04000) +#define ISM_IOP_BASE_IIFX (0x50F12000) + +#define SCC_IOP_BASE_QUADRA (0x50F0C000) +#define ISM_IOP_BASE_QUADRA (0x50F1E000) + +/* IOP status/control register bits: */ + +#define IOP_BYPASS 0x01 /* bypass-mode hardware access */ +#define IOP_AUTOINC 0x02 /* allow autoincrement of ramhi/lo */ +#define IOP_RUN 0x04 /* set to 0 to reset IOP chip */ +#define IOP_IRQ 0x08 /* generate IRQ to IOP if 1 */ +#define IOP_INT0 0x10 /* intr priority from IOP to host */ +#define IOP_INT1 0x20 /* intr priority from IOP to host */ +#define IOP_HWINT 0x40 /* IRQ from hardware; bypass mode only */ +#define IOP_DMAINACTIVE 0x80 /* no DMA request active; bypass mode only */ + +#define NUM_IOPS 2 +#define NUM_IOP_CHAN 7 +#define NUM_IOP_MSGS NUM_IOP_CHAN*8 +#define IOP_MSG_LEN 32 + +/* IOP reference numbers, used by the globally-visible iop_xxx functions */ + +#define IOP_NUM_SCC 0 +#define IOP_NUM_ISM 1 + +/* IOP channel states */ + +#define IOP_MSG_IDLE 0 /* idle */ +#define IOP_MSG_NEW 1 /* new message sent */ +#define IOP_MSG_RCVD 2 /* message received; processing */ +#define IOP_MSG_COMPLETE 3 /* message processing complete */ + +/* IOP message status codes */ + +#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */ +#define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */ +#define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */ +#define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */ +#define IOP_MSGSTATUS_UNSOL 6 /* message is unsolicited */ + +/* IOP memory addresses of the members of the mac_iop_kernel structure. */ + +#define IOP_ADDR_MAX_SEND_CHAN 0x0200 +#define IOP_ADDR_SEND_STATE 0x0201 +#define IOP_ADDR_PATCH_CTRL 0x021F +#define IOP_ADDR_SEND_MSG 0x0220 +#define IOP_ADDR_MAX_RECV_CHAN 0x0300 +#define IOP_ADDR_RECV_STATE 0x0301 +#define IOP_ADDR_ALIVE 0x031F +#define IOP_ADDR_RECV_MSG 0x0320 + +#ifndef __ASSEMBLY__ + +/* + * IOP Control registers, staggered because in usual Apple style they were + * too lazy to decode the A0 bit. This structure is assumed to begin at + * one of the xxx_IOP_BASE addresses given above. + */ + +struct mac_iop { + __u8 ram_addr_hi; /* shared RAM address hi byte */ + __u8 pad0; + __u8 ram_addr_lo; /* shared RAM address lo byte */ + __u8 pad1; + __u8 status_ctrl; /* status/control register */ + __u8 pad2[3]; + __u8 ram_data; /* RAM data byte at ramhi/lo */ + + __u8 pad3[23]; + + /* Bypass-mode hardware access registers */ + + union { + struct { /* SCC registers */ + __u8 sccb_cmd; /* SCC B command reg */ + __u8 pad4; + __u8 scca_cmd; /* SCC A command reg */ + __u8 pad5; + __u8 sccb_data; /* SCC B data */ + __u8 pad6; + __u8 scca_data; /* SCC A data */ + } scc_regs; + + struct { /* ISM registers */ + __u8 wdata; /* write a data byte */ + __u8 pad7; + __u8 wmark; /* write a mark byte */ + __u8 pad8; + __u8 wcrc; /* write 2-byte crc to disk */ + __u8 pad9; + __u8 wparams; /* write the param regs */ + __u8 pad10; + __u8 wphase; /* write the phase states & dirs */ + __u8 pad11; + __u8 wsetup; /* write the setup register */ + __u8 pad12; + __u8 wzeroes; /* mode reg: 1's clr bits, 0's are x */ + __u8 pad13; + __u8 wones; /* mode reg: 1's set bits, 0's are x */ + __u8 pad14; + __u8 rdata; /* read a data byte */ + __u8 pad15; + __u8 rmark; /* read a mark byte */ + __u8 pad16; + __u8 rerror; /* read the error register */ + __u8 pad17; + __u8 rparams; /* read the param regs */ + __u8 pad18; + __u8 rphase; /* read the phase states & dirs */ + __u8 pad19; + __u8 rsetup; /* read the setup register */ + __u8 pad20; + __u8 rmode; /* read the mode register */ + __u8 pad21; + __u8 rhandshake; /* read the handshake register */ + } ism_regs; + } b; +}; + +/* This structure is used to track IOP messages in the Linux kernel */ + +struct iop_msg { + struct iop_msg *next; /* next message in queue or NULL */ + uint iop_num; /* IOP number */ + uint channel; /* channel number */ + void *caller_priv; /* caller private data */ + int status; /* status of this message */ + __u8 message[IOP_MSG_LEN]; /* the message being sent/received */ + __u8 reply[IOP_MSG_LEN]; /* the reply to the message */ + void (*handler)(struct iop_msg *); + /* function to call when reply recvd */ +}; + +extern int iop_scc_present,iop_ism_present; + +extern int iop_listen(uint, uint, + void (*handler)(struct iop_msg *), + const char *); +extern int iop_send_message(uint, uint, void *, uint, __u8 *, + void (*)(struct iop_msg *)); +extern void iop_complete_message(struct iop_msg *); +extern void iop_upload_code(uint, __u8 *, uint, __u16); +extern void iop_download_code(uint, __u8 *, uint, __u16); +extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16); + +#endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h new file mode 100644 index 0000000..39a5c29 --- /dev/null +++ b/arch/m68k/include/asm/mac_mouse.h @@ -0,0 +1,23 @@ +#ifndef _ASM_MAC_MOUSE_H +#define _ASM_MAC_MOUSE_H + +/* + * linux/include/asm-m68k/mac_mouse.h + * header file for Macintosh ADB mouse driver + * 27-10-97 Michael Schmitz + * copied from: + * header file for Atari Mouse driver + * by Robert de Vries (robert@and.nl) on 19Jul93 + */ + +struct mouse_status { + char buttons; + short dx; + short dy; + int ready; + int active; + wait_queue_head_t wait; + struct fasync_struct *fasyncptr; +}; + +#endif diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h new file mode 100644 index 0000000..7221f72 --- /dev/null +++ b/arch/m68k/include/asm/mac_oss.h @@ -0,0 +1,94 @@ +/* + * OSS + * + * This is used in place of VIA2 on the IIfx. + */ + +#define OSS_BASE (0x50f1a000) + +/* + * Interrupt level offsets for mac_oss->irq_level + */ + +#define OSS_NUBUS0 0 +#define OSS_NUBUS1 1 +#define OSS_NUBUS2 2 +#define OSS_NUBUS3 3 +#define OSS_NUBUS4 4 +#define OSS_NUBUS5 5 +#define OSS_IOPISM 6 +#define OSS_IOPSCC 7 +#define OSS_SOUND 8 +#define OSS_SCSI 9 +#define OSS_60HZ 10 +#define OSS_VIA1 11 +#define OSS_UNUSED1 12 +#define OSS_UNUSED2 13 +#define OSS_PARITY 14 +#define OSS_UNUSED3 15 + +#define OSS_NUM_SOURCES 16 + +/* + * Pending interrupt bits in mac_oss->irq_pending + */ + +#define OSS_IP_NUBUS0 0x0001 +#define OSS_IP_NUBUS1 0x0002 +#define OSS_IP_NUBUS2 0x0004 +#define OSS_IP_NUBUS3 0x0008 +#define OSS_IP_NUBUS4 0x0010 +#define OSS_IP_NUBUS5 0x0020 +#define OSS_IP_IOPISM 0x0040 +#define OSS_IP_IOPSCC 0x0080 +#define OSS_IP_SOUND 0x0100 +#define OSS_IP_SCSI 0x0200 +#define OSS_IP_60HZ 0x0400 +#define OSS_IP_VIA1 0x0800 +#define OSS_IP_UNUSED1 0x1000 +#define OSS_IP_UNUSED2 0x2000 +#define OSS_IP_PARITY 0x4000 +#define OSS_IP_UNUSED3 0x8000 + +#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5) + +/* + * Rom Control Register + */ + +#define OSS_POWEROFF 0x80 + +/* + * OSS Interrupt levels for various sub-systems + * + * This mapping is layed out with two things in mind: first, we try to keep + * things on their own levels to avoid having to do double-dispatches. Second, + * the levels match as closely as possible the alternate IRQ mapping mode (aka + * "A/UX mode") available on some VIA machines. + */ + +#define OSS_IRQLEV_DISABLED 0 +#define OSS_IRQLEV_IOPISM 1 /* ADB? */ +#define OSS_IRQLEV_SCSI IRQ_AUTO_2 +#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */ +#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */ +#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */ +#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */ +#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */ +#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */ + +#ifndef __ASSEMBLY__ + +struct mac_oss { + __u8 irq_level[0x10]; /* [0x000-0x00f] Interrupt levels */ + __u8 padding0[0x1F2]; /* [0x010-0x201] IO space filler */ + __u16 irq_pending; /* [0x202-0x203] pending interrupts bits */ + __u8 rom_ctrl; /* [0x204-0x204] ROM cntl reg (for poweroff) */ + __u8 padding1[0x2]; /* [0x205-0x206] currently unused by A/UX */ + __u8 ack_60hz; /* [0x207-0x207] 60 Hz ack. */ +}; + +extern volatile struct mac_oss *oss; +extern int oss_present; + +#endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h new file mode 100644 index 0000000..7808bb0 --- /dev/null +++ b/arch/m68k/include/asm/mac_psc.h @@ -0,0 +1,248 @@ +/* + * Apple Peripheral System Controller (PSC) + * + * The PSC is used on the AV Macs to control IO functions not handled + * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA + * channels. + * + * The first seven DMA channels appear to be "one-shot" and are actually + * sets of two channels; one member is active while the other is being + * configured, and then you flip the active member and start all over again. + * The one-shot channels are grouped together and are: + * + * 1. SCSI + * 2. Ethernet Read + * 3. Ethernet Write + * 4. Floppy Disk Controller + * 5. SCC Channel A Receive + * 6. SCC Channel B Receive + * 7. SCC Channel A Transmit + * + * The remaining two channels are handled somewhat differently. They appear + * to be closely tied and share one set of registers. They also seem to run + * continuously, although how you keep the buffer filled in this scenario is + * not understood as there seems to be only one input and one output buffer + * pointer. + * + * Much of this was extrapolated from what was known about the Ethernet + * registers and subsequently confirmed using MacsBug (ie by pinging the + * machine with easy-to-find patterns and looking for them in the DMA + * buffers, or by sending a file over the serial ports and finding the + * file in the buffers.) + * + * 1999-05-25 (jmt) + */ + +#define PSC_BASE (0x50F31000) + +/* + * The IER/IFR registers work like the VIA, except that it has 4 + * of them each on different interrupt levels, and each register + * set only seems to handle four interrupts instead of seven. + * + * To access a particular set of registers, add 0xn0 to the base + * where n = 3,4,5 or 6. + */ + +#define pIFRbase 0x100 +#define pIERbase 0x104 + +/* + * One-shot DMA control registers + */ + +#define PSC_MYSTERY 0x804 + +#define PSC_CTL_BASE 0xC00 + +#define PSC_SCSI_CTL 0xC00 +#define PSC_ENETRD_CTL 0xC10 +#define PSC_ENETWR_CTL 0xC20 +#define PSC_FDC_CTL 0xC30 +#define PSC_SCCA_CTL 0xC40 +#define PSC_SCCB_CTL 0xC50 +#define PSC_SCCATX_CTL 0xC60 + +/* + * DMA channels. Add +0x10 for the second channel in the set. + * You're supposed to use one channel while the other runs and + * then flip channels and do the whole thing again. + */ + +#define PSC_ADDR_BASE 0x1000 +#define PSC_LEN_BASE 0x1004 +#define PSC_CMD_BASE 0x1008 + +#define PSC_SET0 0x00 +#define PSC_SET1 0x10 + +#define PSC_SCSI_ADDR 0x1000 /* confirmed */ +#define PSC_SCSI_LEN 0x1004 /* confirmed */ +#define PSC_SCSI_CMD 0x1008 /* confirmed */ +#define PSC_ENETRD_ADDR 0x1020 /* confirmed */ +#define PSC_ENETRD_LEN 0x1024 /* confirmed */ +#define PSC_ENETRD_CMD 0x1028 /* confirmed */ +#define PSC_ENETWR_ADDR 0x1040 /* confirmed */ +#define PSC_ENETWR_LEN 0x1044 /* confirmed */ +#define PSC_ENETWR_CMD 0x1048 /* confirmed */ +#define PSC_FDC_ADDR 0x1060 /* strongly suspected */ +#define PSC_FDC_LEN 0x1064 /* strongly suspected */ +#define PSC_FDC_CMD 0x1068 /* strongly suspected */ +#define PSC_SCCA_ADDR 0x1080 /* confirmed */ +#define PSC_SCCA_LEN 0x1084 /* confirmed */ +#define PSC_SCCA_CMD 0x1088 /* confirmed */ +#define PSC_SCCB_ADDR 0x10A0 /* confirmed */ +#define PSC_SCCB_LEN 0x10A4 /* confirmed */ +#define PSC_SCCB_CMD 0x10A8 /* confirmed */ +#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */ +#define PSC_SCCATX_LEN 0x10C4 /* confirmed */ +#define PSC_SCCATX_CMD 0x10C8 /* confirmed */ + +/* + * Free-running DMA registers. The only part known for sure are the bits in + * the control register, the buffer addresses and the buffer length. Everything + * else is anybody's guess. + * + * These registers seem to be mirrored every thirty-two bytes up until offset + * 0x300. It's safe to assume then that a new set of registers starts there. + */ + +#define PSC_SND_CTL 0x200 /* + * [ 16-bit ] + * Sound (Singer?) control register. + * + * bit 0 : ???? + * bit 1 : ???? + * bit 2 : Set to one to enable sound + * output. Possibly a mute flag. + * bit 3 : ???? + * bit 4 : ???? + * bit 5 : ???? + * bit 6 : Set to one to enable pass-thru + * audio. In this mode the audio data + * seems to appear in both the input + * buffer and the output buffer. + * bit 7 : Set to one to activate the + * sound input DMA or zero to + * disable it. + * bit 8 : Set to one to activate the + * sound output DMA or zero to + * disable it. + * bit 9 : \ + * bit 11 : | + * These two bits control the sample + * rate. Usually set to binary 10 and + * MacOS 8.0 says I'm at 48 KHz. Using + * a binary value of 01 makes things + * sound about 1/2 speed (24 KHz?) and + * binary 00 is slower still (22 KHz?) + * + * Setting this to 0x0000 is a good way to + * kill all DMA at boot time so that the + * PSC won't overwrite the kernel image + * with sound data. + */ + +/* + * 0x0202 - 0x0203 is unused. Writing there + * seems to clobber the control register. + */ + +#define PSC_SND_SOURCE 0x204 /* + * [ 32-bit ] + * Controls input source and volume: + * + * bits 12-15 : input source volume, 0 - F + * bits 16-19 : unknown, always 0x5 + * bits 20-23 : input source selection: + * 0x3 = CD Audio + * 0x4 = External Audio + * + * The volume is definitely not the general + * output volume as it doesn't affect the + * alert sound volume. + */ +#define PSC_SND_STATUS1 0x208 /* + * [ 32-bit ] + * Appears to be a read-only status register. + * The usual value is 0x00400002. + */ +#define PSC_SND_HUH3 0x20C /* + * [ 16-bit ] + * Unknown 16-bit value, always 0x0000. + */ +#define PSC_SND_BITS2GO 0x20E /* + * [ 16-bit ] + * Counts down to zero from some constant + * value. The value appears to be the + * number of _bits_ remaining before the + * buffer is full, which would make sense + * since Apple's docs say the sound DMA + * channels are 1 bit wide. + */ +#define PSC_SND_INADDR 0x210 /* + * [ 32-bit ] + * Address of the sound input DMA buffer + */ +#define PSC_SND_OUTADDR 0x214 /* + * [ 32-bit ] + * Address of the sound output DMA buffer + */ +#define PSC_SND_LEN 0x218 /* + * [ 16-bit ] + * Length of both buffers in eight-byte units. + */ +#define PSC_SND_HUH4 0x21A /* + * [ 16-bit ] + * Unknown, always 0x0000. + */ +#define PSC_SND_STATUS2 0x21C /* + * [ 16-bit ] + * Appears to e a read-only status register. + * The usual value is 0x0200. + */ +#define PSC_SND_HUH5 0x21E /* + * [ 16-bit ] + * Unknown, always 0x0000. + */ + +#ifndef __ASSEMBLY__ + +extern volatile __u8 *psc; +extern int psc_present; + +/* + * Access functions + */ + +static inline void psc_write_byte(int offset, __u8 data) +{ + *((volatile __u8 *)(psc + offset)) = data; +} + +static inline void psc_write_word(int offset, __u16 data) +{ + *((volatile __u16 *)(psc + offset)) = data; +} + +static inline void psc_write_long(int offset, __u32 data) +{ + *((volatile __u32 *)(psc + offset)) = data; +} + +static inline u8 psc_read_byte(int offset) +{ + return *((volatile __u8 *)(psc + offset)); +} + +static inline u16 psc_read_word(int offset) +{ + return *((volatile __u16 *)(psc + offset)); +} + +static inline u32 psc_read_long(int offset) +{ + return *((volatile __u32 *)(psc + offset)); +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h new file mode 100644 index 0000000..39afb43 --- /dev/null +++ b/arch/m68k/include/asm/mac_via.h @@ -0,0 +1,267 @@ +/* + * 6522 Versatile Interface Adapter (VIA) + * + * There are two of these on the Mac II. Some IRQ's are vectored + * via them as are assorted bits and bobs - eg rtc, adb. The picture + * is a bit incomplete as the Mac documentation doesn't cover this well + */ + +#ifndef _ASM_MAC_VIA_H_ +#define _ASM_MAC_VIA_H_ + +/* + * Base addresses for the VIAs. There are two in every machine, + * although on some machines the second is an RBV or an OSS. + * The OSS is different enough that it's handled separately. + * + * Do not use these values directly; use the via1 and via2 variables + * instead (and don't forget to check rbv_present when using via2!) + */ + +#define VIA1_BASE (0x50F00000) +#define VIA2_BASE (0x50F02000) +#define RBV_BASE (0x50F26000) + +/* + * Not all of these are true post MacII I think. + * CSA: probably the ones CHRP marks as 'unused' change purposes + * when the IWM becomes the SWIM. + * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html + * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf + * + * also, http://developer.apple.com/technotes/hw/hw_09.html claims the + * following changes for IIfx: + * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP. + * Also, "All of the functionality of VIA2 has been moved to other chips". + */ + +#define VIA1A_vSccWrReq 0x80 /* SCC write. (input) + * [CHRP] SCC WREQ: Reflects the state of the + * Wait/Request pins from the SCC. + * [Macintosh Family Hardware] + * as CHRP on SE/30,II,IIx,IIcx,IIci. + * on IIfx, "0 means an active request" + */ +#define VIA1A_vRev8 0x40 /* Revision 8 board ??? + * [CHRP] En WaitReqB: Lets the WaitReq_L + * signal from port B of the SCC appear on + * the PA7 input pin. Output. + * [Macintosh Family] On the SE/30, this + * is the bit to flip screen buffers. + * 0=alternate, 1=main. + * on II,IIx,IIcx,IIci,IIfx this is a bit + * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx + */ +#define VIA1A_vHeadSel 0x20 /* Head select for IWM. + * [CHRP] unused. + * [Macintosh Family] "Floppy disk + * state-control line SEL" on all but IIfx + */ +#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx + * this bit enables the "Overlay" address + * map in the address decoders as it is on + * reset for mapping the ROM over the reset + * vector. 1=use overlay map. + * On the IIci,IIfx it is another bit of the + * CPU ID: 0=normal IIci, 1=IIci with parity + * feature or IIfx. + * [CHRP] En WaitReqA: Lets the WaitReq_L + * signal from port A of the SCC appear + * on the PA7 input pin (CHRP). Output. + * [MkLinux] "Drive Select" + * (with 0x20 being 'disk head select') + */ +#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select: + * 1: select the external serial clock to + * drive the SCC's /RTxCA pin. + * 0: Select the 3.6864MHz clock to drive + * the SCC cell. + * [Macintosh Family] Correct on all but IIfx + */ + +/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control + * on Macs which had the PWM sound hardware. Reserved on newer models. + * On IIci,IIfx, bits 1-2 are the rest of the CPU ID: + * bit 2: 1=IIci, 0=IIfx + * bit 1: 1 on both IIci and IIfx. + * MkLinux sez bit 0 is 'burnin flag' in this case. + * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as + * inputs, these bits will read 0. + */ +#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */ +#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */ +#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */ +#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */ +#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */ + +/* Info on VIA1B is from Macintosh Family Hardware & MkLinux. + * CHRP offers no info. */ +#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with + * PWM hardware) 0=enabled. + * Also, on IIci w/parity, shows parity error + * 0=error, 1=OK. */ +#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled + * On SE/30, vertical sync interrupt enable. + * 0=enabled. This vSync interrupt shows up + * as a slot $E interrupt. */ +#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */ +#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */ +#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/ +#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */ +#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */ +#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */ + +/* MkLinux defines the following "VIA1 Register B contents where they + * differ from standard VIA1". From the naming scheme, we assume they + * correspond to a VIA work-alike named 'EVR'. */ +#define EVRB_XCVR 0x08 /* XCVR_SESSION* */ +#define EVRB_FULL 0x10 /* VIA_FULL */ +#define EVRB_SYSES 0x20 /* SYS_SESSION */ +#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */ +#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */ +#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */ +#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */ + +/* + * VIA2 A register is the interrupt lines raised off the nubus + * slots. + * The below info is from 'Macintosh Family Hardware.' + * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.' + * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and + * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike. + * Perhaps OSS uses vRAM1 and vRAM2 for ADB. + */ + +#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */ +#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */ +#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */ +#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */ +#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */ +#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */ +#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */ +#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */ + +/* RAM size bits decoded as follows: + * bit1 bit0 size of ICs in bank A + * 0 0 256 kbit + * 0 1 1 Mbit + * 1 0 4 Mbit + * 1 1 16 Mbit + */ + +/* + * Register B has the fun stuff in it + */ + +#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by + * timer T1. + * on IIci, parity test: 0=test mode. + * [MkLinux] RBV_PARODD: 1=odd,0=even. */ +#define VIA2B_vSndJck 0x40 /* External sound jack status. + * 0=plug is inserted. On SE/30, always 0 */ +#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */ +#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */ +#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush + * on II, AMU/PMMU control. + * if AMU, 0=24bit to 32bit translation + * if PMMU, 1=PMMU is accessing page table. + * on SE/30 tied low. + * on IIx,IIcx,IIfx, unused. + * on IIci/RBV, cache control. 0=flush cache. + */ +#define VIA2B_vPower 0x04 /* Power off, 0=shut off power. + * on SE/30 this signal sent to PDS card. */ +#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked. + * on SE/30 sent to PDS card. */ +#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card + * on others, 0=disable processor's instruction + * and data caches. */ + +/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html + * Another example of a valid function that has no ROM support is the use + * of the alternate video page for page-flipping animation. Since there + * is no ROM call to flip pages, it is necessary to go play with the + * right bit in the VIA chip (6522 Versatile Interface Adapter). + * [CSA: don't know which one this is, but it's one of 'em!] + */ + +/* + * 6522 registers - see databook. + * CSA: Assignments for VIA1 confirmed from CHRP spec. + */ + +/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */ +/* Note: 15 VIA regs, 8 RBV regs */ + +#define vBufB 0x0000 /* [VIA/RBV] Register B */ +#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */ +#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */ +#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */ +#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */ +#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */ +#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */ +#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */ +#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ +#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ +#define vSR 0x1400 /* [VIA only] Shift register. */ +#define vACR 0x1600 /* [VIA only] Auxilary control register. */ +#define vPCR 0x1800 /* [VIA only] Peripheral control register. */ + /* CHRP sez never ever to *write* this. + * Mac family says never to *change* this. + * In fact we need to initialize it once at start. */ +#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */ +#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */ +#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */ + +/* The RBV only decodes the bottom eight address lines; the VIA doesn't + * decode the bottom eight -- so vBufB | rBufB will always get you BufB */ +/* CSA: in fact, only bits 0,1, and 4 seem to be decoded. + * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem + * to matter. In fact *all* of the top 8 bits seem to matter; + * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either. + * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999] + */ + +#define rBufB 0x0000 /* [VIA/RBV] Register B */ +#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */ +#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */ +#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */ +#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */ +#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */ +#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */ +#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */ +#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */ + +/* + * Video monitor parameters, for rMonP: + */ +#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */ +#define RBV_MONID 0x38 /* monitor type, as below. */ +#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */ +/* Supported monitor types: */ +#define MON_15BW (1<<3) /* 15" BW portrait. */ +#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */ +#define MON_15RGB (5<<3) /* 15" RGB portrait. */ +#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */ +#define MON_NONE (7<<3) /* No monitor attached. */ + +/* To clarify IER manipulations */ +#define IER_SET_BIT(b) (0x80 | (1<<(b)) ) +#define IER_CLR_BIT(b) (0x7F & (1<<(b)) ) + +#ifndef __ASSEMBLY__ + +extern volatile __u8 *via1,*via2; +extern int rbv_present,via_alt_mapping; + +static inline int rbv_set_video_bpp(int bpp) +{ + char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1; + if (!rbv_present || val<0) return -1; + via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val; + return 0; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_MAC_VIA_H_ */ diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h new file mode 100644 index 0000000..fc24b6f --- /dev/null +++ b/arch/m68k/include/asm/machdep.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "machdep_no.h" +#else +#include "machdep_mm.h" +#endif diff --git a/arch/m68k/include/asm/machdep_mm.h b/arch/m68k/include/asm/machdep_mm.h new file mode 100644 index 0000000..5637dce --- /dev/null +++ b/arch/m68k/include/asm/machdep_mm.h @@ -0,0 +1,35 @@ +#ifndef _M68K_MACHDEP_H +#define _M68K_MACHDEP_H + +#include +#include + +struct pt_regs; +struct mktime; +struct rtc_time; +struct rtc_pll_info; +struct buffer_head; + +extern void (*mach_sched_init) (irq_handler_t handler); +/* machine dependent irq functions */ +extern void (*mach_init_IRQ) (void); +extern void (*mach_get_model) (char *model); +extern void (*mach_get_hardware_list) (struct seq_file *m); +/* machine dependent timer functions */ +extern unsigned long (*mach_gettimeoffset)(void); +extern int (*mach_hwclk)(int, struct rtc_time*); +extern unsigned int (*mach_get_ss)(void); +extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); +extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); +extern int (*mach_set_clock_mmss)(unsigned long); +extern void (*mach_reset)( void ); +extern void (*mach_halt)( void ); +extern void (*mach_power_off)( void ); +extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); +extern void (*mach_hd_setup)(char *, int *); +extern long mach_max_dma_address; +extern void (*mach_heartbeat) (int); +extern void (*mach_l2_flush) (int); +extern void (*mach_beep) (unsigned int, unsigned int); + +#endif /* _M68K_MACHDEP_H */ diff --git a/arch/m68k/include/asm/machdep_no.h b/arch/m68k/include/asm/machdep_no.h new file mode 100644 index 0000000..de9f47a --- /dev/null +++ b/arch/m68k/include/asm/machdep_no.h @@ -0,0 +1,26 @@ +#ifndef _M68KNOMMU_MACHDEP_H +#define _M68KNOMMU_MACHDEP_H + +#include + +/* Hardware clock functions */ +extern void hw_timer_init(void); +extern unsigned long hw_timer_offset(void); + +extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); + +/* Machine dependent time handling */ +extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, + int *min, int *sec); +extern int (*mach_set_clock_mmss)(unsigned long); + +/* machine dependent power off functions */ +extern void (*mach_reset)( void ); +extern void (*mach_halt)( void ); +extern void (*mach_power_off)( void ); + +extern void config_BSP(char *command, int len); + +extern void do_IRQ(int irq, struct pt_regs *fp); + +#endif /* _M68KNOMMU_MACHDEP_H */ diff --git a/arch/m68k/include/asm/machines.h b/arch/m68k/include/asm/machines.h new file mode 100644 index 0000000..be667e8 --- /dev/null +++ b/arch/m68k/include/asm/machines.h @@ -0,0 +1,85 @@ +/* + * machines.h: Defines for taking apart the machine type value in the + * idprom and determining the kind of machine we are on. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au) + */ +#ifndef _SPARC_MACHINES_H +#define _SPARC_MACHINES_H + +struct Sun_Machine_Models { + char *name; + unsigned char id_machtype; +}; + +/* Current number of machines we know about that has an IDPROM + * machtype entry including one entry for the 0x80 OBP machines. + */ +// reduced along with table in arch/m68k/sun3/idprom.c +// sun3 port doesn't need to know about sparc machines. +//#define NUM_SUN_MACHINES 23 +#define NUM_SUN_MACHINES 8 + +/* The machine type in the idprom area looks like this: + * + * --------------- + * | ARCH | MACH | + * --------------- + * 7 4 3 0 + * + * The ARCH field determines the architecture line (sun4, sun4c, etc). + * The MACH field determines the machine make within that architecture. + */ + +#define SM_ARCH_MASK 0xf0 +#define SM_SUN3 0x10 +#define SM_SUN4 0x20 +#define SM_SUN3X 0x40 +#define SM_SUN4C 0x50 +#define SM_SUN4M 0x70 +#define SM_SUN4M_OBP 0x80 + +#define SM_TYP_MASK 0x0f +/* Sun3 machines */ +#define SM_3_160 0x01 /* Sun 3/160 series */ +#define SM_3_50 0x02 /* Sun 3/50 series */ +#define SM_3_260 0x03 /* Sun 3/260 series */ +#define SM_3_110 0x04 /* Sun 3/110 series */ +#define SM_3_60 0x07 /* Sun 3/60 series */ +#define SM_3_E 0x08 /* Sun 3/E series */ + +/* Sun3x machines */ +#define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */ +#define SM_3_80 0x02 /* Sun 3/80 series */ + +/* Sun4 machines */ +#define SM_4_260 0x01 /* Sun 4/200 series */ +#define SM_4_110 0x02 /* Sun 4/100 series */ +#define SM_4_330 0x03 /* Sun 4/300 series */ +#define SM_4_470 0x04 /* Sun 4/400 series */ + +/* Sun4c machines Full Name - PROM NAME */ +#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ +#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ +#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ +#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ +#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ +#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ +#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ + +/* Sun4m machines, these predate the OpenBoot. These values only mean + * something if the value in the ARCH field is SM_SUN4M, if it is + * SM_SUN4M_OBP then you have the following situation: + * 1) You either have a sun4d, a sun4e, or a recently made sun4m. + * 2) You have to consult OpenBoot to determine which machine this is. + */ +#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ +#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ +#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ + +/* Sun4d machines -- N/A */ +/* Sun4e machines -- N/A */ +/* Sun4u machines -- N/A */ + +#endif /* !(_SPARC_MACHINES_H) */ diff --git a/arch/m68k/include/asm/machw.h b/arch/m68k/include/asm/machw.h new file mode 100644 index 0000000..2b4de0c --- /dev/null +++ b/arch/m68k/include/asm/machw.h @@ -0,0 +1,49 @@ +/* +** linux/machw.h -- This header defines some macros and pointers for +** the various Macintosh custom hardware registers. +** +** Copyright 1997 by Michael Schmitz +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +*/ + +#ifndef _ASM_MACHW_H_ +#define _ASM_MACHW_H_ + +/* + * head.S maps the videomem to VIDEOMEMBASE + */ + +#define VIDEOMEMBASE 0xf0000000 +#define VIDEOMEMSIZE (4096*1024) +#define VIDEOMEMMASK (-4096*1024) + +#ifndef __ASSEMBLY__ + +#include + +#if 0 +/* +** SCC Z8530 +*/ + +#define MAC_SCC_BAS (0x50F04000) +struct MAC_SCC + { + u_char cha_a_ctrl; + u_char char_dummy1; + u_char cha_a_data; + u_char char_dummy2; + u_char cha_b_ctrl; + u_char char_dummy3; + u_char cha_b_data; + }; +# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS)) +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* linux/machw.h */ diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h new file mode 100644 index 0000000..05309f7 --- /dev/null +++ b/arch/m68k/include/asm/macintosh.h @@ -0,0 +1,135 @@ +#ifndef __ASM_MACINTOSH_H +#define __ASM_MACINTOSH_H + +#include +#include + +/* + * Apple Macintoshisms + */ + +extern void mac_reset(void); +extern void mac_poweroff(void); +extern void mac_init_IRQ(void); +extern int mac_irq_pending(unsigned int); + +/* + * Floppy driver magic hook - probably shouldnt be here + */ + +extern void via1_set_head(int); + +/* + * Macintosh Table + */ + +struct mac_model +{ + short ident; + char *name; + char adb_type; + char via_type; + char scsi_type; + char ide_type; + char scc_type; + char ether_type; + char nubus_type; +}; + +#define MAC_ADB_NONE 0 +#define MAC_ADB_II 1 +#define MAC_ADB_IISI 2 +#define MAC_ADB_CUDA 3 +#define MAC_ADB_PB1 4 +#define MAC_ADB_PB2 5 +#define MAC_ADB_IOP 6 + +#define MAC_VIA_II 1 +#define MAC_VIA_IIci 2 +#define MAC_VIA_QUADRA 3 + +#define MAC_SCSI_NONE 0 +#define MAC_SCSI_OLD 1 +#define MAC_SCSI_QUADRA 2 +#define MAC_SCSI_QUADRA2 3 +#define MAC_SCSI_QUADRA3 4 + +#define MAC_IDE_NONE 0 +#define MAC_IDE_QUADRA 1 +#define MAC_IDE_PB 2 +#define MAC_IDE_BABOON 3 + +#define MAC_SCC_II 1 +#define MAC_SCC_IOP 2 +#define MAC_SCC_QUADRA 3 +#define MAC_SCC_PSC 4 + +#define MAC_ETHER_NONE 0 +#define MAC_ETHER_SONIC 1 +#define MAC_ETHER_MACE 2 + +#define MAC_NO_NUBUS 0 +#define MAC_NUBUS 1 + +/* + * Gestalt numbers + */ + +#define MAC_MODEL_II 6 +#define MAC_MODEL_IIX 7 +#define MAC_MODEL_IICX 8 +#define MAC_MODEL_SE30 9 +#define MAC_MODEL_IICI 11 +#define MAC_MODEL_IIFX 13 /* And well numbered it is too */ +#define MAC_MODEL_IISI 18 +#define MAC_MODEL_LC 19 +#define MAC_MODEL_Q900 20 +#define MAC_MODEL_PB170 21 +#define MAC_MODEL_Q700 22 +#define MAC_MODEL_CLII 23 /* aka: P200 */ +#define MAC_MODEL_PB140 25 +#define MAC_MODEL_Q950 26 /* aka: WGS95 */ +#define MAC_MODEL_LCIII 27 /* aka: P450 */ +#define MAC_MODEL_PB210 29 +#define MAC_MODEL_C650 30 +#define MAC_MODEL_PB230 32 +#define MAC_MODEL_PB180 33 +#define MAC_MODEL_PB160 34 +#define MAC_MODEL_Q800 35 /* aka: WGS80 */ +#define MAC_MODEL_Q650 36 +#define MAC_MODEL_LCII 37 /* aka: P400/405/410/430 */ +#define MAC_MODEL_PB250 38 +#define MAC_MODEL_IIVI 44 +#define MAC_MODEL_P600 45 /* aka: P600CD */ +#define MAC_MODEL_IIVX 48 +#define MAC_MODEL_CCL 49 /* aka: P250 */ +#define MAC_MODEL_PB165C 50 +#define MAC_MODEL_C610 52 /* aka: WGS60 */ +#define MAC_MODEL_Q610 53 +#define MAC_MODEL_PB145 54 /* aka: PB145B */ +#define MAC_MODEL_P520 56 /* aka: LC520 */ +#define MAC_MODEL_C660 60 +#define MAC_MODEL_P460 62 /* aka: LCIII+, P466/P467 */ +#define MAC_MODEL_PB180C 71 +#define MAC_MODEL_PB520 72 /* aka: PB520C, PB540, PB540C, PB550C */ +#define MAC_MODEL_PB270C 77 +#define MAC_MODEL_Q840 78 +#define MAC_MODEL_P550 80 /* aka: LC550, P560 */ +#define MAC_MODEL_CCLII 83 /* aka: P275 */ +#define MAC_MODEL_PB165 84 +#define MAC_MODEL_PB190 85 /* aka: PB190CS */ +#define MAC_MODEL_TV 88 +#define MAC_MODEL_P475 89 /* aka: LC475, P476 */ +#define MAC_MODEL_P475F 90 /* aka: P475 w/ FPU (no LC040) */ +#define MAC_MODEL_P575 92 /* aka: LC575, P577/P578 */ +#define MAC_MODEL_Q605 94 +#define MAC_MODEL_Q605_ACC 95 /* Q605 accelerated to 33 MHz */ +#define MAC_MODEL_Q630 98 /* aka: LC630, P630/631/635/636/637/638/640 */ +#define MAC_MODEL_P588 99 /* aka: LC580, P580 */ +#define MAC_MODEL_PB280 102 +#define MAC_MODEL_PB280C 103 +#define MAC_MODEL_PB150 115 + +extern struct mac_model *macintosh_config; + +#endif diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h new file mode 100644 index 0000000..679c48a --- /dev/null +++ b/arch/m68k/include/asm/macints.h @@ -0,0 +1,155 @@ +/* +** macints.h -- Macintosh Linux interrupt handling structs and prototypes +** +** Copyright 1997 by Michael Schmitz +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +*/ + +#ifndef _ASM_MACINTS_H_ +#define _ASM_MACINTS_H_ + +#include + +/* Setting this prints debugging info for unclaimed interrupts */ + +#define DEBUG_SPURIOUS + +/* Setting this prints debugging info on each autovector interrupt */ + +/* #define DEBUG_IRQS */ + +/* Setting this prints debugging info on each Nubus interrupt */ + +/* #define DEBUG_NUBUS_INT */ + +/* Setting this prints debugging info on irqs as they enabled and disabled. */ + +/* #define DEBUG_IRQUSE */ + +/* + * Base IRQ number for all Mac68K interrupt sources. Each source + * has eight indexes (base -> base+7). + */ + +#define VIA1_SOURCE_BASE 8 +#define VIA2_SOURCE_BASE 16 +#define MAC_SCC_SOURCE_BASE 24 +#define PSC3_SOURCE_BASE 24 +#define PSC4_SOURCE_BASE 32 +#define PSC5_SOURCE_BASE 40 +#define PSC6_SOURCE_BASE 48 +#define NUBUS_SOURCE_BASE 56 +#define BABOON_SOURCE_BASE 64 + +/* + * Maximum IRQ number is BABOON_SOURCE_BASE + 7, + * giving us IRQs up through 71 + */ + +#define NUM_MAC_SOURCES 72 + +/* + * clean way to separate IRQ into its source and index + */ + +#define IRQ_SRC(irq) (irq >> 3) +#define IRQ_IDX(irq) (irq & 7) + +/* VIA1 interrupts */ +#define IRQ_VIA1_0 (8) /* one second int. */ +#define IRQ_VIA1_1 (9) /* VBlank int. */ +#define IRQ_MAC_VBL IRQ_VIA1_1 +#define IRQ_VIA1_2 (10) /* ADB SR shifts complete */ +#define IRQ_MAC_ADB IRQ_VIA1_2 +#define IRQ_MAC_ADB_SR IRQ_VIA1_2 +#define IRQ_VIA1_3 (11) /* ADB SR CB2 ?? */ +#define IRQ_MAC_ADB_SD IRQ_VIA1_3 +#define IRQ_VIA1_4 (12) /* ADB SR ext. clock pulse */ +#define IRQ_MAC_ADB_CL IRQ_VIA1_4 +#define IRQ_VIA1_5 (13) +#define IRQ_MAC_TIMER_2 IRQ_VIA1_5 +#define IRQ_VIA1_6 (14) +#define IRQ_MAC_TIMER_1 IRQ_VIA1_6 +#define IRQ_VIA1_7 (15) + +/* VIA2/RBV interrupts */ +#define IRQ_VIA2_0 (16) +#define IRQ_MAC_SCSIDRQ IRQ_VIA2_0 +#define IRQ_VIA2_1 (17) +#define IRQ_MAC_NUBUS IRQ_VIA2_1 +#define IRQ_VIA2_2 (18) +#define IRQ_VIA2_3 (19) +#define IRQ_MAC_SCSI IRQ_VIA2_3 +#define IRQ_VIA2_4 (20) +#define IRQ_VIA2_5 (21) +#define IRQ_VIA2_6 (22) +#define IRQ_VIA2_7 (23) + +/* Level 3 (PSC, AV Macs only) interrupts */ +#define IRQ_PSC3_0 (24) +#define IRQ_MAC_MACE IRQ_PSC3_0 +#define IRQ_PSC3_1 (25) +#define IRQ_PSC3_2 (26) +#define IRQ_PSC3_3 (27) + +/* Level 4 (SCC) interrupts */ +#define IRQ_SCC (32) +#define IRQ_SCCA (33) +#define IRQ_SCCB (34) +#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */ +/* SCC interrupts */ +#define IRQ_SCCB_TX (32) +#define IRQ_SCCB_STAT (33) +#define IRQ_SCCB_RX (34) +#define IRQ_SCCB_SPCOND (35) +#define IRQ_SCCA_TX (36) +#define IRQ_SCCA_STAT (37) +#define IRQ_SCCA_RX (38) +#define IRQ_SCCA_SPCOND (39) +#endif + +/* Level 4 (PSC, AV Macs only) interrupts */ +#define IRQ_PSC4_0 (32) +#define IRQ_PSC4_1 (33) +#define IRQ_PSC4_2 (34) +#define IRQ_PSC4_3 (35) +#define IRQ_MAC_MACE_DMA IRQ_PSC4_3 + +/* Level 5 (PSC, AV Macs only) interrupts */ +#define IRQ_PSC5_0 (40) +#define IRQ_PSC5_1 (41) +#define IRQ_PSC5_2 (42) +#define IRQ_PSC5_3 (43) + +/* Level 6 (PSC, AV Macs only) interrupts */ +#define IRQ_PSC6_0 (48) +#define IRQ_PSC6_1 (49) +#define IRQ_PSC6_2 (50) +#define IRQ_PSC6_3 (51) + +/* Nubus interrupts (cascaded to VIA2) */ +#define IRQ_NUBUS_9 (56) +#define IRQ_NUBUS_A (57) +#define IRQ_NUBUS_B (58) +#define IRQ_NUBUS_C (59) +#define IRQ_NUBUS_D (60) +#define IRQ_NUBUS_E (61) +#define IRQ_NUBUS_F (62) + +/* Baboon interrupts (cascaded to nubus slot $C) */ +#define IRQ_BABOON_0 (64) +#define IRQ_BABOON_1 (65) +#define IRQ_BABOON_2 (66) +#define IRQ_BABOON_3 (67) + +#define SLOT2IRQ(x) (x + 47) +#define IRQ2SLOT(x) (x - 47) + +#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ +#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ + +#endif /* asm/macints.h */ diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h new file mode 100644 index 0000000..ddfab96 --- /dev/null +++ b/arch/m68k/include/asm/math-emu.h @@ -0,0 +1,315 @@ +#ifndef _ASM_M68K_SETUP_H +#define _ASM_M68K_SETUP_H + +#include +#include + +/* Status Register bits */ + +/* accrued exception bits */ +#define FPSR_AEXC_INEX 3 +#define FPSR_AEXC_DZ 4 +#define FPSR_AEXC_UNFL 5 +#define FPSR_AEXC_OVFL 6 +#define FPSR_AEXC_IOP 7 + +/* exception status bits */ +#define FPSR_EXC_INEX1 8 +#define FPSR_EXC_INEX2 9 +#define FPSR_EXC_DZ 10 +#define FPSR_EXC_UNFL 11 +#define FPSR_EXC_OVFL 12 +#define FPSR_EXC_OPERR 13 +#define FPSR_EXC_SNAN 14 +#define FPSR_EXC_BSUN 15 + +/* quotient byte, assumes big-endian, of course */ +#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) + +/* condition code bits */ +#define FPSR_CC_NAN 24 +#define FPSR_CC_INF 25 +#define FPSR_CC_Z 26 +#define FPSR_CC_NEG 27 + + +/* Control register bits */ + +/* rounding mode */ +#define FPCR_ROUND_RN 0 /* round to nearest/even */ +#define FPCR_ROUND_RZ 1 /* round to zero */ +#define FPCR_ROUND_RM 2 /* minus infinity */ +#define FPCR_ROUND_RP 3 /* plus infinity */ + +/* rounding precision */ +#define FPCR_PRECISION_X 0 /* long double */ +#define FPCR_PRECISION_S 1 /* double */ +#define FPCR_PRECISION_D 2 /* float */ + + +/* Flags to select the debugging output */ +#define PDECODE 0 +#define PEXECUTE 1 +#define PCONV 2 +#define PNORM 3 +#define PREGISTER 4 +#define PINSTR 5 +#define PUNIMPL 6 +#define PMOVEM 7 + +#define PMDECODE (1< +#include + +union fp_mant64 { + unsigned long long m64; + unsigned long m32[2]; +}; + +union fp_mant128 { + unsigned long long m64[2]; + unsigned long m32[4]; +}; + +/* internal representation of extended fp numbers */ +struct fp_ext { + unsigned char lowmant; + unsigned char sign; + unsigned short exp; + union fp_mant64 mant; +}; + +/* C representation of FPU registers */ +/* NOTE: if you change this, you have to change the assembler offsets + below and the size in , too */ +struct fp_data { + struct fp_ext fpreg[8]; + unsigned int fpcr; + unsigned int fpsr; + unsigned int fpiar; + unsigned short prec; + unsigned short rnd; + struct fp_ext temp[2]; +}; + +#ifdef FPU_EMU_DEBUG +extern unsigned int fp_debugprint; + +#define dprint(bit, fmt, args...) ({ \ + if (fp_debugprint & (1 << (bit))) \ + printk(fmt, ## args); \ +}) +#else +#define dprint(bit, fmt, args...) +#endif + +#define uprint(str) ({ \ + static int __count = 3; \ + \ + if (__count > 0) { \ + printk("You just hit an unimplemented " \ + "fpu instruction (%s)\n", str); \ + printk("Please report this to ....\n"); \ + __count--; \ + } \ +}) + +#define FPDATA ((struct fp_data *)current->thread.fp) + +#else /* __ASSEMBLY__ */ + +#define FPDATA %a2 + +/* offsets from the base register to the floating point data in the task struct */ +#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) +#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) +#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) +#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) +#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) +#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) +#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) +#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) +#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) + +/* offsets on the stack to access saved registers, + * these are only used during instruction decoding + * where we always know how deep we're on the stack. + */ +#define FPS_DO (PT_D0) +#define FPS_D1 (PT_D1) +#define FPS_D2 (PT_D2) +#define FPS_A0 (PT_A0) +#define FPS_A1 (PT_A1) +#define FPS_A2 (PT_A2) +#define FPS_SR (PT_SR) +#define FPS_PC (PT_PC) +#define FPS_EA (PT_PC+6) +#define FPS_PC2 (PT_PC+10) + +.macro fp_get_fp_reg + lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 + lea (%a0,%d0.w*8),%a0 +.endm + +/* Macros used to get/put the current program counter. + * 020/030 use a different stack frame then 040/060, for the + * 040/060 the return pc points already to the next location, + * so this only needs to be modified for jump instructions. + */ +.macro fp_get_pc dest + move.l (FPS_PC+4,%sp),\dest +.endm + +.macro fp_put_pc src,jump=0 + move.l \src,(FPS_PC+4,%sp) +.endm + +.macro fp_get_instr_data f,s,dest,label + getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) + addq.l #\s,%sp@(FPS_PC+4) +.endm + +.macro fp_get_instr_word dest,label,addr + fp_get_instr_data w,2,\dest,\label,\addr +.endm + +.macro fp_get_instr_long dest,label,addr + fp_get_instr_data l,4,\dest,\label,\addr +.endm + +/* These macros are used to read from/write to user space + * on error we jump to the fixup section, load the fault + * address into %a0 and jump to the exit. + * (derived from ) + */ +.macro getuser size,src,dest,label,addr +| printf ,"[\size<%08x]",1,\addr +.Lu1\@: moves\size \src,\dest + + .section .fixup,"ax" + .even +.Lu2\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu2\@ + .previous +.endm + +.macro putuser size,src,dest,label,addr +| printf ,"[\size>%08x]",1,\addr +.Lu1\@: moves\size \src,\dest +.Lu2\@: + + .section .fixup,"ax" + .even +.Lu3\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu3\@ + .long .Lu2\@,.Lu3\@ + .previous +.endm + +/* work around binutils idiocy */ +old_gas=-1 +.irp gas_ident.x .x +old_gas=old_gas+1 +.endr +.if !old_gas +.irp m b,w,l +.macro getuser.\m src,dest,label,addr + getuser .\m,\src,\dest,\label,\addr +.endm +.macro putuser.\m src,dest,label,addr + putuser .\m,\src,\dest,\label,\addr +.endm +.endr +.endif + +.macro movestack nr,arg1,arg2,arg3,arg4,arg5 + .if \nr + movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 + move.l \arg1,-(%sp) + .endif +.endm + +.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 +#ifdef FPU_EMU_DEBUG + .data +.Lpdata\@: + .string "\string" + .previous + + movem.l %d0/%d1/%a0/%a1,-(%sp) + .if \bit+1 +#if 0 + moveq #\bit,%d0 + andw #7,%d0 + btst %d0,fp_debugprint+((31-\bit)/8) +#else + btst #\bit,fp_debugprint+((31-\bit)/8) +#endif + jeq .Lpskip\@ + .endif + movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 + pea .Lpdata\@ + jsr printk + lea ((\nr+1)*4,%sp),%sp +.Lpskip\@: + movem.l (%sp)+,%d0/%d1/%a0/%a1 +#endif +.endm + +.macro printx bit,fp +#ifdef FPU_EMU_DEBUG + movem.l %d0/%a0,-(%sp) + lea \fp,%a0 +#if 0 + moveq #'+',%d0 + tst.w (%a0) + jeq .Lx1\@ + moveq #'-',%d0 +.Lx1\@: printf \bit," %c",1,%d0 + move.l (4,%a0),%d0 + bclr #31,%d0 + jne .Lx2\@ + printf \bit,"0." + jra .Lx3\@ +.Lx2\@: printf \bit,"1." +.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) + move.w (2,%a0),%d0 + ext.l %d0 + printf \bit,"E%04x",1,%d0 +#else + printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) +#endif + movem.l (%sp)+,%d0/%a0 +#endif +.endm + +.macro debug instr,args +#ifdef FPU_EMU_DEBUG + \instr \args +#endif +.endm + + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_M68K_SETUP_H */ diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h new file mode 100644 index 0000000..fb90dcf --- /dev/null +++ b/arch/m68k/include/asm/mc146818rtc.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mc146818rtc_no.h" +#else +#include "mc146818rtc_mm.h" +#endif diff --git a/arch/m68k/include/asm/mc146818rtc_mm.h b/arch/m68k/include/asm/mc146818rtc_mm.h new file mode 100644 index 0000000..9f70a01 --- /dev/null +++ b/arch/m68k/include/asm/mc146818rtc_mm.h @@ -0,0 +1,26 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + + +#ifdef CONFIG_ATARI +/* RTC in Atari machines */ + +#include + +#define RTC_PORT(x) (TT_RTC_BAS + 2*(x)) +#define RTC_ALWAYS_BCD 0 + +#define CMOS_READ(addr) ({ \ +atari_outb_p((addr),RTC_PORT(0)); \ +atari_inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +atari_outb_p((addr),RTC_PORT(0)); \ +atari_outb_p((val),RTC_PORT(1)); \ +}) +#endif /* CONFIG_ATARI */ + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/m68k/include/asm/mc146818rtc_no.h b/arch/m68k/include/asm/mc146818rtc_no.h new file mode 100644 index 0000000..907a0481 --- /dev/null +++ b/arch/m68k/include/asm/mc146818rtc_no.h @@ -0,0 +1,9 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _M68KNOMMU_MC146818RTC_H +#define _M68KNOMMU_MC146818RTC_H + +/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ + +#endif /* _M68KNOMMU_MC146818RTC_H */ diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h new file mode 100644 index 0000000..c042634 --- /dev/null +++ b/arch/m68k/include/asm/mcfcache.h @@ -0,0 +1,150 @@ +/****************************************************************************/ + +/* + * mcfcache.h -- ColdFire CPU cache support code + * + * (C) Copyright 2004, Greg Ungerer + */ + +/****************************************************************************/ +#ifndef __M68KNOMMU_MCFCACHE_H +#define __M68KNOMMU_MCFCACHE_H +/****************************************************************************/ + + +/* + * The different ColdFire families have different cache arrangments. + * Everything from a small instruction only cache, to configurable + * data and/or instruction cache, to unified instruction/data, to + * harvard style separate instruction and data caches. + */ + +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) +/* + * Simple version 2 core cache. These have instruction cache only, + * we just need to invalidate it and enable it. + */ +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate cache cmd */ + movec %d0,%CACR /* do invalidate cache */ + movel #0x80000100,%d0 /* setup cache mask */ + movec %d0,%CACR /* enable cache */ +.endm +#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) +/* + * New version 2 cores have a configurable split cache arrangement. + * For now I am just enabling instruction cache - but ultimately I + * think a split instruction/data cache would be better. + */ +.macro CACHE_ENABLE + movel #0x01400000,%d0 + movec %d0,%CACR /* invalidate cache */ + nop + movel #0x0000c000,%d0 /* set SDRAM cached only */ + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0x80400100,%d0 /* configure cache */ + movec %d0,%CACR /* enable cache */ + nop +.endm +#endif /* CONFIG_M523x || CONFIG_M527x */ + +#if defined(CONFIG_M528x) +.macro CACHE_ENABLE + nop + movel #0x01000000, %d0 + movec %d0, %CACR /* Invalidate cache */ + nop + movel #0x0000c020, %d0 /* Set SDRAM cached only */ + movec %d0, %ACR0 + movel #0x00000000, %d0 /* No other regions cached */ + movec %d0, %ACR1 + movel #0x80000200, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop +.endm +#endif /* CONFIG_M528x */ + +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) +/* + * The version 3 core cache. Oddly enough the version 2 core 5249 + * has the same SDRAM and cache setup as the version 3 cores. + * This is a single unified instruction/data cache. + */ +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop +#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) + movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ +#else + movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ +#endif + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0xa0000200,%d0 /* enable cache */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M5249 || CONFIG_M5307 */ + +#if defined(CONFIG_M532x) +.macro CACHE_ENABLE + movel #0x01000000,%d0 /* invalidate cache cmd */ + movec %d0,%CACR /* do invalidate cache */ + nop + movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ + movec %d0,%ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + movel #0x80000200,%d0 /* setup cache mask */ + movec %d0,%CACR /* enable cache */ + nop +.endm +#endif /* CONFIG_M532x */ + +#if defined(CONFIG_M5407) +/* + * Version 4 cores have a true harvard style separate instruction + * and data cache. Invalidate and enable cache, also enable write + * buffers and branch accelerator. + */ +.macro CACHE_ENABLE + movel #0x01040100,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop + movel #0x000fc000,%d0 /* set SDRAM cached only */ + movec %d0, %ACR0 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0, %ACR1 + movel #0x000fc000,%d0 /* set SDRAM cached only */ + movec %d0, %ACR2 + movel #0x00000000,%d0 /* no other regions cached */ + movec %d0, %ACR3 + movel #0xb6088400,%d0 /* enable caches */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M5407 */ + +#if defined(CONFIG_M520x) +.macro CACHE_ENABLE + move.l #0x01000000,%d0 /* invalidate whole cache */ + movec %d0,%CACR + nop + move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ + movec %d0,%ACR0 + move.l #0x00000000,%d0 /* no other regions cached */ + movec %d0,%ACR1 + move.l #0x80400000,%d0 /* enable 8K instruction cache */ + movec %d0,%CACR + nop +.endm +#endif /* CONFIG_M520x */ + +/****************************************************************************/ +#endif /* __M68KNOMMU_MCFCACHE_H */ diff --git a/arch/m68k/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h new file mode 100644 index 0000000..705c52c --- /dev/null +++ b/arch/m68k/include/asm/mcfdma.h @@ -0,0 +1,144 @@ +/****************************************************************************/ + +/* + * mcfdma.h -- Coldfire internal DMA support defines. + * + * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) + */ + +/****************************************************************************/ +#ifndef mcfdma_h +#define mcfdma_h +/****************************************************************************/ + + +/* + * Get address specific defines for this Coldfire member. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ +#elif defined(CONFIG_M5272) +#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +/* These are relative to the IPSBAR, not MBAR */ +#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ +#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ +#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ +#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ +#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ +#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ +#endif + + +#if !defined(CONFIG_M5272) + +/* + * Define the DMA register set addresses. + * Note: these are longword registers, use unsigned long as data type + */ +#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ +#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ +/* these are word registers, use unsigned short data type */ +#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ +#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ +/* these are byte registers, use unsiged char data type */ +#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ +#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ + +/* + * Bit definitions for the DMA Control Register (DCR). + */ +#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ +#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ +#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ +#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ +#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ +#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ +#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ +#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ +#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ +#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ +#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ +#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ +#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ +#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ +#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ +#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ +#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ +#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ +#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ +#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ +#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ +#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ +#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ +#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ +#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ +#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ +#define MCFDMA_DCR_START 0x0001 /* Start transfer */ + +/* + * Bit definitions for the DMA Status Register (DSR). + */ +#define MCFDMA_DSR_CE 0x40 /* Config error */ +#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ +#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ +#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ +#define MCFDMA_DSR_BSY 0x02 /* Busy */ +#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ + +#else /* This is an MCF5272 */ + +#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ +#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ +#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ +#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ +#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ + +/* Bit definitions for the DMA Mode Register (DMR) */ +#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ +#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ +#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ +#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ +#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ +#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ +#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ +#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ +#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ +#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ +#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ +#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ +#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ +#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ +#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ +#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ +#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ +#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ +#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ +#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ +#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ +#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ +#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ +#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ +#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ +#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ +#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ +#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ + +/* Bit definitions for the DMA interrupt register (DIR) */ +#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ +#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ +#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ +#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ +#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ +#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ +#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ +#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ + +#endif /* !defined(CONFIG_M5272) */ + +/****************************************************************************/ +#endif /* mcfdma_h */ diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h new file mode 100644 index 0000000..319899c --- /dev/null +++ b/arch/m68k/include/asm/mcfmbus.h @@ -0,0 +1,77 @@ +/****************************************************************************/ + +/* + * mcfmbus.h -- Coldfire MBUS support defines. + * + * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) + */ + +/****************************************************************************/ + + +#ifndef mcfmbus_h +#define mcfmbus_h + + +#define MCFMBUS_BASE 0x280 +#define MCFMBUS_IRQ_VECTOR 0x19 +#define MCFMBUS_IRQ 0x1 +#define MCFMBUS_CLK 0x3f +#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ +#define MCFMBUS_ADDRESS 0x01 + + +/* +* Define the 5307 MBUS register set addresses +*/ + +#define MCFMBUS_MADR 0x00 +#define MCFMBUS_MFDR 0x04 +#define MCFMBUS_MBCR 0x08 +#define MCFMBUS_MBSR 0x0C +#define MCFMBUS_MBDR 0x10 + + +#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ + +#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ + +/* +* Define bit flags in Control Register +*/ + +#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ +#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ +#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ +#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ +#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ +#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ + +/* +* Define bit flags in Status Register +*/ + +#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ +#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ +#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ +#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ +#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ +#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ +#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ + +/* +* Define bit flags in DATA I/O Register +*/ + +#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ + +#define MBUSIOCSCLOCK 1 +#define MBUSIOCGCLOCK 2 +#define MBUSIOCSADDR 3 +#define MBUSIOCGADDR 4 +#define MBUSIOCSSLADDR 5 +#define MBUSIOCGSLADDR 6 +#define MBUSIOCSSUBADDR 7 +#define MBUSIOCGSUBADDR 8 + +#endif diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h new file mode 100644 index 0000000..431f63a --- /dev/null +++ b/arch/m68k/include/asm/mcfne.h @@ -0,0 +1,325 @@ +/****************************************************************************/ + +/* + * mcfne.h -- NE2000 in ColdFire eval boards. + * + * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo (www.lineo.com) + * (C) Copyright 2001, SnapGear (www.snapgear.com) + * + * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board + * + * Hacked support for m5206e Cadre III evaluation board + * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 + */ + +/****************************************************************************/ +#ifndef mcfne_h +#define mcfne_h +/****************************************************************************/ + + +/* + * Support for NE2000 clones devices in ColdFire based boards. + * Not all boards address these parts the same way, some use a + * direct addressing method, others use a side-band address space + * to access odd address registers, some require byte swapping + * others do not. + */ +#define BSWAP(w) (((w) << 8) | ((w) >> 8)) +#define RSWAP(w) (w) + + +/* + * Define the basic hardware resources of NE2000 boards. + */ + +#if defined(CONFIG_ARN5206) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0xf0 +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 4 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5206eC3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1c +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 4 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) +#define NE2000_ADDR 0x30000300 +#define NE2000_IRQ_VECTOR 25 +#define NE2000_IRQ_PRIORITY 1 +#define NE2000_IRQ_LEVEL 3 +#define NE2000_BYTE volatile unsigned char +#endif + +#if defined(CONFIG_M5307C3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +#define NE2000_ADDR 0x30600300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR 67 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_M5307) && defined(CONFIG_NETtel) +#define NE2000_ADDR0 0x30600300 +#define NE2000_ADDR1 0x30800300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR0 27 +#define NE2000_IRQ_VECTOR1 29 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) +#define NE2000_ADDR 0x30600300 +#define NE2000_ODDOFFSET 0x00008000 +#define NE2000_IRQ_VECTOR 27 +#undef BSWAP +#define BSWAP(w) (w) +#define NE2000_BYTE volatile unsigned short +#undef RSWAP +#define RSWAP(w) (((w) << 8) | ((w) >> 8)) +#endif + +#if defined(CONFIG_ARN5307) +#define NE2000_ADDR 0xfe600300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_IRQ_PRIORITY 2 +#define NE2000_IRQ_LEVEL 3 +#define NE2000_BYTE volatile unsigned short +#endif + +#if defined(CONFIG_M5407C3) +#define NE2000_ADDR 0x40000300 +#define NE2000_ODDOFFSET 0x00010000 +#define NE2000_IRQ_VECTOR 0x1b +#define NE2000_BYTE volatile unsigned short +#endif + +/****************************************************************************/ + +/* + * Side-band address space for odd address requires re-mapping + * many of the standard ISA access functions. + */ +#ifdef NE2000_ODDOFFSET + +#undef outb +#undef outb_p +#undef inb +#undef inb_p +#undef outsb +#undef outsw +#undef insb +#undef insw + +#define outb ne2000_outb +#define inb ne2000_inb +#define outb_p ne2000_outb +#define inb_p ne2000_inb +#define outsb ne2000_outsb +#define outsw ne2000_outsw +#define insb ne2000_insb +#define insw ne2000_insw + + +#ifndef COLDFIRE_NE2000_FUNCS + +void ne2000_outb(unsigned int val, unsigned int addr); +int ne2000_inb(unsigned int addr); +void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); +void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); +void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); +void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); + +#else + +/* + * This macro converts a conventional register address into the + * real memory pointer of the mapped NE2000 device. + * On most NE2000 implementations on ColdFire boards the chip is + * mapped in kinda funny, due to its ISA heritage. + */ +#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) +#define NE2000_DATA_PTR(addr) (addr) + + +void ne2000_outb(unsigned int val, unsigned int addr) +{ + NE2000_BYTE *rp; + + rp = (NE2000_BYTE *) NE2000_PTR(addr); + *rp = RSWAP(val); +} + +int ne2000_inb(unsigned int addr) +{ + NE2000_BYTE *rp, val; + + rp = (NE2000_BYTE *) NE2000_PTR(addr); + val = *rp; + return((int) ((NE2000_BYTE) RSWAP(val))); +} + +void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) +{ + NE2000_BYTE *rp, val; + unsigned char *buf; + + buf = (unsigned char *) vbuf; + rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *rp; + *buf++ = RSWAP(val); + } +} + +void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short w, *buf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *rp; + *buf++ = BSWAP(w); + } +} + +void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) +{ + NE2000_BYTE *rp, val; + unsigned char *buf; + + buf = (unsigned char *) vbuf; + rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + val = *buf++; + *rp = RSWAP(val); + } +} + +void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short w, *buf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); + for (; (len > 0); len--) { + w = *buf++; + *rp = BSWAP(w); + } +} + +#endif /* COLDFIRE_NE2000_FUNCS */ +#endif /* NE2000_OFFOFFSET */ + +/****************************************************************************/ + +#ifdef COLDFIRE_NE2000_FUNCS + +/* + * Lastly the interrupt set up code... + * Minor differences between the different board types. + */ + +#if defined(CONFIG_ARN5206) +void ne2000_irqsetup(int irq) +{ + volatile unsigned char *icrp; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); + *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); +} +#endif + +#if defined(CONFIG_M5206eC3) +void ne2000_irqsetup(int irq) +{ + volatile unsigned char *icrp; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); + *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); +} +#endif + +#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) +void ne2000_irqsetup(int irq) +{ + mcf_autovector(irq); +} +#endif + +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +void ne2000_irqsetup(int irq) +{ + volatile unsigned long *icrp; + volatile unsigned long *pitr; + + /* The NE2000 device uses external IRQ3 */ + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); + *icrp = (*icrp & 0x77077777) | 0x00d00000; + + pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); + *pitr = *pitr | 0x20000000; +} + +void ne2000_irqack(int irq) +{ + volatile unsigned long *icrp; + + /* The NE2000 device uses external IRQ3 */ + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); + *icrp = (*icrp & 0x77777777) | 0x00800000; +} +#endif + +#if defined(CONFIG_M5307) || defined(CONFIG_M5407) +#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) + +void ne2000_irqsetup(int irq) +{ + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); + mcf_autovector(irq); +} + +#else + +void ne2000_irqsetup(int irq) +{ + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); +} + +#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ +#endif /* CONFIG_M5307 || CONFIG_M5407 */ + +#endif /* COLDFIRE_NE2000_FUNCS */ + +/****************************************************************************/ +#endif /* mcfne_h */ diff --git a/arch/m68k/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h new file mode 100644 index 0000000..f1507dd --- /dev/null +++ b/arch/m68k/include/asm/mcfpci.h @@ -0,0 +1,119 @@ +/****************************************************************************/ + +/* + * mcfpci.h -- PCI bridge on ColdFire eval boards. + * + * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfpci_h +#define mcfpci_h +/****************************************************************************/ + + +#ifdef CONFIG_PCI + +/* + * Address regions in the PCI address space are not mapped into the + * normal memory space of the ColdFire. They must be accessed via + * handler routines. This is easy for I/O space (inb/outb/etc) but + * needs some code changes to support ordinary memory. Interrupts + * also need to be vectored through the PCI handler first, then it + * will call the actual driver sub-handlers. + */ + +/* + * Un-define all the standard I/O access routines. + */ +#undef inb +#undef inw +#undef inl +#undef inb_p +#undef inw_p +#undef insb +#undef insw +#undef insl +#undef outb +#undef outw +#undef outl +#undef outb_p +#undef outw_p +#undef outsb +#undef outsw +#undef outsl + +#undef request_irq +#undef free_irq + +#undef bus_to_virt +#undef virt_to_bus + + +/* + * Re-direct all I/O memory accesses functions to PCI specific ones. + */ +#define inb pci_inb +#define inw pci_inw +#define inl pci_inl +#define inb_p pci_inb +#define inw_p pci_inw +#define insb pci_insb +#define insw pci_insw +#define insl pci_insl + +#define outb pci_outb +#define outw pci_outw +#define outl pci_outl +#define outb_p pci_outb +#define outw_p pci_outw +#define outsb pci_outsb +#define outsw pci_outsw +#define outsl pci_outsl + +#define request_irq pci_request_irq +#define free_irq pci_free_irq + +#define virt_to_bus pci_virt_to_bus +#define bus_to_virt pci_bus_to_virt + +#define CONFIG_COMEMPCI 1 + + +/* + * Prototypes of the real PCI functions (defined in bios32.c). + */ +unsigned char pci_inb(unsigned int addr); +unsigned short pci_inw(unsigned int addr); +unsigned int pci_inl(unsigned int addr); +void pci_insb(void *addr, void *buf, int len); +void pci_insw(void *addr, void *buf, int len); +void pci_insl(void *addr, void *buf, int len); + +void pci_outb(unsigned char val, unsigned int addr); +void pci_outw(unsigned short val, unsigned int addr); +void pci_outl(unsigned int val, unsigned int addr); +void pci_outsb(void *addr, void *buf, int len); +void pci_outsw(void *addr, void *buf, int len); +void pci_outsl(void *addr, void *buf, int len); + +int pci_request_irq(unsigned int irq, + void (*handler)(int, void *, struct pt_regs *), + unsigned long flags, + const char *device, + void *dev_id); +void pci_free_irq(unsigned int irq, void *dev_id); + +void *pci_bmalloc(int size); +void pci_bmfree(void *bmp, int len); +void pci_copytoshmem(unsigned long bmp, void *src, int size); +void pci_copyfromshmem(void *dst, unsigned long bmp, int size); +unsigned long pci_virt_to_bus(volatile void *address); +void *pci_bus_to_virt(unsigned long address); +void pci_bmcpyto(void *dst, void *src, int len); +void pci_bmcpyfrom(void *dst, void *src, int len); + +#endif /* CONFIG_PCI */ +/****************************************************************************/ +#endif /* mcfpci_h */ diff --git a/arch/m68k/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h new file mode 100644 index 0000000..f570cf6 --- /dev/null +++ b/arch/m68k/include/asm/mcfpit.h @@ -0,0 +1,64 @@ +/****************************************************************************/ + +/* + * mcfpit.h -- ColdFire internal PIT timer support defines. + * + * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) + */ + +/****************************************************************************/ +#ifndef mcfpit_h +#define mcfpit_h +/****************************************************************************/ + + +/* + * Get address specific defines for the 5270/5271, 5280/5282, and 5208. + */ +#if defined(CONFIG_M520x) +#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ +#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ +#else +#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ +#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ +#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ +#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ +#endif + +/* + * Define the PIT timer register set addresses. + */ +#define MCFPIT_PCSR 0x0 /* PIT control register */ +#define MCFPIT_PMR 0x2 /* PIT modulus register */ +#define MCFPIT_PCNTR 0x4 /* PIT count register */ + +/* + * Bit definitions for the PIT Control and Status register. + */ +#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ +#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ +#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ +#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ +#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ +#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ +#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ +#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ +#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ +#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ +#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ +#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ +#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ +#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ +#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ +#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ +#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ +#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ +#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ +#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ + +/****************************************************************************/ +#endif /* mcfpit_h */ diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h new file mode 100644 index 0000000..da3f2ce --- /dev/null +++ b/arch/m68k/include/asm/mcfsim.h @@ -0,0 +1,126 @@ +/****************************************************************************/ + +/* + * mcfsim.h -- ColdFire System Integration Module support. + * + * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfsim_h +#define mcfsim_h +/****************************************************************************/ + + +/* + * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, + * 5307 or 5407 specific addresses. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#include +#elif defined(CONFIG_M520x) +#include +#elif defined(CONFIG_M523x) +#include +#elif defined(CONFIG_M5249) +#include +#elif defined(CONFIG_M527x) +#include +#elif defined(CONFIG_M5272) +#include +#elif defined(CONFIG_M528x) +#include +#elif defined(CONFIG_M5307) +#include +#elif defined(CONFIG_M532x) +#include +#elif defined(CONFIG_M5407) +#include +#endif + + +/* + * Define the base address of the SIM within the MBAR address space. + */ +#define MCFSIM_BASE 0x0 /* Base address of SIM */ + + +/* + * Bit definitions for the ICR family of registers. + */ +#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ +#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ +#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ +#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ +#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ +#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ +#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ +#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ +#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ + +#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ +#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ +#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ +#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ + +/* + * Bit definitions for the Interrupt Mask register (IMR). + */ +#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ +#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ +#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ +#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ +#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ +#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ +#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ + +#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ +#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ +#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ +#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ +#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ +#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ + +#if defined(CONFIG_M5206e) +#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ +#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) +#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ +#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ +#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ +#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ +#endif + +/* + * Mask for all of the SIM devices. Some parts have more or less + * SIM devices. This is a catchall for the sandard set. + */ +#ifndef MCFSIM_IMR_MASKALL +#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ +#endif + + +/* + * PIT interrupt settings, if not found in mXXXXsim.h file. + */ +#ifndef ICR_INTRCONF +#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ +#endif +#ifndef MCFPIT_IMR +#define MCFPIT_IMR MCFINTC_IMRH +#endif +#ifndef MCFPIT_IMR_IBIT +#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) +#endif + + +#ifndef __ASSEMBLY__ +/* + * Definition for the interrupt auto-vectoring support. + */ +extern void mcf_autovector(unsigned int vec); +#endif /* __ASSEMBLY__ */ + +/****************************************************************************/ +#endif /* mcfsim_h */ diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h new file mode 100644 index 0000000..2d7a4db --- /dev/null +++ b/arch/m68k/include/asm/mcfsmc.h @@ -0,0 +1,187 @@ +/****************************************************************************/ + +/* + * mcfsmc.h -- SMC ethernet support for ColdFire environments. + * + * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfsmc_h +#define mcfsmc_h +/****************************************************************************/ + +/* + * None of the current ColdFire targets that use the SMC91x111 + * allow 8 bit accesses. So this code is 16bit access only. + */ + + +#undef outb +#undef inb +#undef outw +#undef outwd +#undef inw +#undef outl +#undef inl + +#undef outsb +#undef outsw +#undef outsl +#undef insb +#undef insw +#undef insl + +/* + * Re-defines for ColdFire environment... The SMC part is + * mapped into memory space, so remap the PC-style in/out + * routines to handle that. + */ +#define outb smc_outb +#define inb smc_inb +#define outw smc_outw +#define outwd smc_outwd +#define inw smc_inw +#define outl smc_outl +#define inl smc_inl + +#define outsb smc_outsb +#define outsw smc_outsw +#define outsl smc_outsl +#define insb smc_insb +#define insw smc_insw +#define insl smc_insl + + +static inline int smc_inb(unsigned int addr) +{ + register unsigned short w; + w = *((volatile unsigned short *) (addr & ~0x1)); + return(((addr & 0x1) ? w : (w >> 8)) & 0xff); +} + +static inline void smc_outw(unsigned int val, unsigned int addr) +{ + *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); +} + +static inline int smc_inw(unsigned int addr) +{ + register unsigned short w; + w = *((volatile unsigned short *) addr); + return(((w << 8) | (w >> 8)) & 0xffff); +} + +static inline void smc_outl(unsigned long val, unsigned int addr) +{ + *((volatile unsigned long *) addr) = + ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | + ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); +} + +static inline void smc_outwd(unsigned int val, unsigned int addr) +{ + *((volatile unsigned short *) addr) = val; +} + + +/* + * The rep* functions are used to feed the data port with + * raw data. So we do not byte swap them when copying. + */ + +static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + + /* Copy as words for as long as possible */ + for (ebuf = buf + (len >> 1); (buf < ebuf); ) + *buf++ = *rp; + + /* Lastly, handle left over byte */ + if (len & 0x1) + *((unsigned char *) buf) = (*rp >> 8) & 0xff; +} + +static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *buf++ = *rp; +} + +static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned long *rp; + unsigned long *buf, *ebuf; + + buf = (unsigned long *) vbuf; + rp = (volatile unsigned long *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *buf++ = *rp; +} + +static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) +{ + volatile unsigned short *rp; + unsigned short *buf, *ebuf; + + buf = (unsigned short *) vbuf; + rp = (volatile unsigned short *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *rp = *buf++; +} + +static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) +{ + volatile unsigned long *rp; + unsigned long *buf, *ebuf; + + buf = (unsigned long *) vbuf; + rp = (volatile unsigned long *) addr; + for (ebuf = buf + len; (buf < ebuf); ) + *rp = *buf++; +} + + +#ifdef CONFIG_NETtel +/* + * Re-map the address space of at least one of the SMC ethernet + * parts. Both parts power up decoding the same address, so we + * need to move one of them first, before doing enything else. + * + * We also increase the number of wait states for this part by one. + */ + +void smc_remap(unsigned int ioaddr) +{ + static int once = 0; + extern unsigned short ppdata; + if (once++ == 0) { + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; + ppdata |= 0x0080; + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + outw(0x0001, ioaddr + BANK_SELECT); + outw(0x0001, ioaddr + BANK_SELECT); + outw(0x0067, ioaddr + BASE); + + ppdata &= ~0x0080; + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + } + + *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; +} + +#endif + +/****************************************************************************/ +#endif /* mcfsmc_h */ diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h new file mode 100644 index 0000000..0f90f6d --- /dev/null +++ b/arch/m68k/include/asm/mcftimer.h @@ -0,0 +1,80 @@ +/****************************************************************************/ + +/* + * mcftimer.h -- ColdFire internal TIMER support defines. + * + * (C) Copyright 1999-2006, Greg Ungerer + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcftimer_h +#define mcftimer_h +/****************************************************************************/ + + +/* + * Get address specific defines for this ColdFire member. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ +#elif defined(CONFIG_M5272) +#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ +#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ +#elif defined(CONFIG_M532x) +#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ +#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ +#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ +#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ +#endif + + +/* + * Define the TIMER register set addresses. + */ +#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ +#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ +#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ +#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ +#if defined(CONFIG_M532x) +#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ +#else +#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ +#endif + +/* + * Bit definitions for the Timer Mode Register (TMR). + * Register bit flags are common accross ColdFires. + */ +#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ +#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ +#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ +#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ +#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ +#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ +#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ +#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ +#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ +#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ +#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ +#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ +#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ +#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ +#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ +#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ +#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ + +/* + * Bit definitions for the Timer Event Registers (TER). + */ +#define MCFTIMER_TER_CAP 0x01 /* Capture event */ +#define MCFTIMER_TER_REF 0x02 /* Refernece event */ + +/****************************************************************************/ +#endif /* mcftimer_h */ diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h new file mode 100644 index 0000000..ef22938 --- /dev/null +++ b/arch/m68k/include/asm/mcfuart.h @@ -0,0 +1,216 @@ +/****************************************************************************/ + +/* + * mcfuart.h -- ColdFire internal UART support defines. + * + * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfuart_h +#define mcfuart_h +/****************************************************************************/ + +/* + * Define the base address of the UARTS within the MBAR address + * space. + */ +#if defined(CONFIG_M5272) +#define MCFUART_BASE1 0x100 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) +#if defined(CONFIG_NETtel) +#define MCFUART_BASE1 0x180 /* Base address of UART1 */ +#define MCFUART_BASE2 0x140 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x140 /* Base address of UART1 */ +#define MCFUART_BASE2 0x180 /* Base address of UART2 */ +#endif +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x240 /* Base address of UART2 */ +#define MCFUART_BASE3 0x280 /* Base address of UART3 */ +#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) +#define MCFUART_BASE1 0x200 /* Base address of UART1 */ +#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ +#else +#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ +#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#endif +#elif defined(CONFIG_M520x) +#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ +#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ +#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ +#elif defined(CONFIG_M532x) +#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ +#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ +#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ +#endif + + +#include +#include + +struct mcf_platform_uart { + unsigned long mapbase; /* Physical address base */ + void __iomem *membase; /* Virtual address if mapped */ + unsigned int irq; /* Interrupt vector */ + unsigned int uartclk; /* UART clock rate */ +}; + +/* + * Define the ColdFire UART register set addresses. + */ +#define MCFUART_UMR 0x00 /* Mode register (r/w) */ +#define MCFUART_USR 0x04 /* Status register (r) */ +#define MCFUART_UCSR 0x04 /* Clock Select (w) */ +#define MCFUART_UCR 0x08 /* Command register (w) */ +#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ +#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ +#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ +#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ +#define MCFUART_UISR 0x14 /* Interrupt Status (r) */ +#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ +#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ +#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ +#ifdef CONFIG_M5272 +#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ +#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ +#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ +#else +#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ +#endif +#define MCFUART_UIPR 0x34 /* Input Port (r) */ +#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ +#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ + + +/* + * Define bit flags in Mode Register 1 (MR1). + */ +#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ +#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ +#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ +#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ +#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ + +#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ +#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ +#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ +#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ +#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ + +#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ +#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ +#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ +#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ + +/* + * Define bit flags in Mode Register 2 (MR2). + */ +#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ +#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ +#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ +#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ +#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ + +#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ +#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ +#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ + +/* + * Define bit flags in Status Register (USR). + */ +#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ +#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ +#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ +#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ +#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ +#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ +#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ +#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ + +#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ + MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) + +/* + * Define bit flags in Clock Select Register (UCSR). + */ +#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ +#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ +#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ + +#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ +#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ +#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ + +/* + * Define bit flags in Command Register (UCR). + */ +#define MCFUART_UCR_CMDNULL 0x00 /* No command */ +#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ +#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ +#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ +#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ +#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ +#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ +#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ + +#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ +#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ +#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ +#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ +#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ +#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ + +/* + * Define bit flags in Input Port Change Register (UIPCR). + */ +#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ +#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ + +/* + * Define bit flags in Input Port Register (UIP). + */ +#define MCFUART_UIPR_CTS 0x01 /* CTS value */ + +/* + * Define bit flags in Output Port Registers (UOP). + * Clear bit by writing to UOP0, set by writing to UOP1. + */ +#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ + +/* + * Define bit flags in the Auxiliary Control Register (UACR). + */ +#define MCFUART_UACR_IEC 0x01 /* Input enable control */ + +/* + * Define bit flags in Interrupt Status Register (UISR). + * These same bits are used for the Interrupt Mask Register (UIMR). + */ +#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ +#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ +#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ +#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ + +#ifdef CONFIG_M5272 +/* + * Define bit flags in the Transmitter FIFO Register (UTF). + */ +#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ +#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ +#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ + +/* + * Define bit flags in the Receiver FIFO Register (URF). + */ +#define MCFUART_URF_RXB 0x1f /* Receiver data level */ +#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ +#define MCFUART_URF_RXS 0xc0 /* Receiver status */ +#endif + +/****************************************************************************/ +#endif /* mcfuart_h */ diff --git a/arch/m68k/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h new file mode 100644 index 0000000..27f70e4 --- /dev/null +++ b/arch/m68k/include/asm/mcfwdebug.h @@ -0,0 +1,118 @@ +/****************************************************************************/ + +/* + * mcfdebug.h -- ColdFire Debug Module support. + * + * (C) Copyright 2001, Lineo Inc. (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef mcfdebug_h +#define mcfdebug_h +/****************************************************************************/ + +/* Define the debug module registers */ +#define MCFDEBUG_CSR 0x0 /* Configuration status */ +#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ +#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ +#define MCFDEBUG_TDR 0x7 /* Trigger definition */ +#define MCFDEBUG_PBR 0x8 /* PC breakpoint */ +#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ +#define MCFDEBUG_ABHR 0xc /* High address breakpoint */ +#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ +#define MCFDEBUG_DBR 0xe /* Data breakpoint */ +#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ + +/* Define some handy constants for the trigger definition register */ +#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ +#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ +#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ +#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ +#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ +#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ +#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ +#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ +#define MCFDEBUG_TDR_EDLW2 0x10000000 +#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ +#define MCFDEBUG_TDR_EDWL2 0x08000000 +#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ +#define MCFDEBUG_TDR_EDWU2 0x04000000 +#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ +#define MCFDEBUG_TDR_EDLL2 0x02000000 +#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ +#define MCFDEBUG_TDR_EDLM2 0x01000000 +#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ +#define MCFDEBUG_TDR_EDUM2 0x00800000 +#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ +#define MCFDEBUG_TDR_EDUU2 0x00400000 +#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ +#define MCFDEBUG_TDR_DI2 0x00200000 +#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ +#define MCFDEBUG_TDR_EAI2 0x00100000 +#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ +#define MCFDEBUG_TDR_EAR2 0x00080000 +#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ +#define MCFDEBUG_TDR_EAL2 0x00040000 +#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ +#define MCFDEBUG_TDR_EPC2 0x00020000 +#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ +#define MCFDEBUG_TDR_PCI2 0x00010000 + +/* Constants for the address attribute trigger register */ +#define MCFDEBUG_AAR_RESET 0x00000005 +/* Fields not yet implemented */ + +/* And some definitions for the writable sections of the CSR */ +#define MCFDEBUG_CSR_RESET 0x00100000 +#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ +#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ +#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ +#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ +#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ +#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ +#define MCFDEBUG_CSR_DDC_WRITE 0x00001000 +#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ +#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ +#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ +#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ +#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ +#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ +#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ + +/* Constants for the BDM address attribute register */ +#define MCFDEBUG_BAAR_RESET 0x00000005 +/* Fields not yet implemented */ + + +/* This routine wrappers up the wdebug asm instruction so that the register + * and value can be relatively easily specified. The biggest hassle here is + * that the debug module instructions (2 longs) must be long word aligned and + * some pointer fiddling is performed to ensure this. + */ +static inline void wdebug(int reg, unsigned long data) { + unsigned short dbg_spc[6]; + unsigned short *dbg; + + // Force alignment to long word boundary + dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); + + // Build up the debug instruction + dbg[0] = 0x2c80 | (reg & 0xf); + dbg[1] = (data >> 16) & 0xffff; + dbg[2] = data & 0xffff; + dbg[3] = 0; + + // Perform the wdebug instruction +#if 0 + // This strain is for gas which doesn't have the wdebug instructions defined + asm( "move.l %0, %%a0\n\t" + ".word 0xfbd0\n\t" + ".word 0x0003\n\t" + :: "g" (dbg) : "a0"); +#else + // And this is for when it does + asm( "wdebug (%0)" :: "a" (dbg)); +#endif +} + +#endif diff --git a/arch/m68k/include/asm/md.h b/arch/m68k/include/asm/md.h new file mode 100644 index 0000000..d2f78f2 --- /dev/null +++ b/arch/m68k/include/asm/md.h @@ -0,0 +1,13 @@ +/* + * md.h: High speed xor_block operation for RAID4/5 + * + */ + +#ifndef __ASM_MD_H +#define __ASM_MD_H + +/* #define HAVE_ARCH_XORBLOCK */ + +#define MD_XORBLOCK_ALIGNMENT sizeof(long) + +#endif /* __ASM_MD_H */ diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h new file mode 100644 index 0000000..1626d37 --- /dev/null +++ b/arch/m68k/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __M68K_MMAN_H__ +#define __M68K_MMAN_H__ + +#include + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __M68K_MMAN_H__ */ diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h new file mode 100644 index 0000000..a81d394 --- /dev/null +++ b/arch/m68k/include/asm/mmu.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mmu_no.h" +#else +#include "mmu_mm.h" +#endif diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h new file mode 100644 index 0000000..b440928 --- /dev/null +++ b/arch/m68k/include/asm/mmu_context.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mmu_context_no.h" +#else +#include "mmu_context_mm.h" +#endif diff --git a/arch/m68k/include/asm/mmu_context_mm.h b/arch/m68k/include/asm/mmu_context_mm.h new file mode 100644 index 0000000..894dacb --- /dev/null +++ b/arch/m68k/include/asm/mmu_context_mm.h @@ -0,0 +1,154 @@ +#ifndef __M68K_MMU_CONTEXT_H +#define __M68K_MMU_CONTEXT_H + +#include + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#ifndef CONFIG_SUN3 + +#include +#include +#include + +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + mm->context = virt_to_phys(mm->pgd); + return 0; +} + +#define destroy_context(mm) do { } while(0) + +static inline void switch_mm_0230(struct mm_struct *mm) +{ + unsigned long crp[2] = { + 0x80000000 | _PAGE_TABLE, mm->context + }; + unsigned long tmp; + + asm volatile (".chip 68030"); + + /* flush MC68030/MC68020 caches (they are virtually addressed) */ + asm volatile ( + "movec %%cacr,%0;" + "orw %1,%0; " + "movec %0,%%cacr" + : "=d" (tmp) : "di" (FLUSH_I_AND_D)); + + /* Switch the root pointer. For a 030-only kernel, + * avoid flushing the whole ATC, we only need to + * flush the user entries. The 68851 does this by + * itself. Avoid a runtime check here. + */ + asm volatile ( +#ifdef CPU_M68030_ONLY + "pmovefd %0,%%crp; " + "pflush #0,#4" +#else + "pmove %0,%%crp" +#endif + : : "m" (crp[0])); + + asm volatile (".chip 68k"); +} + +static inline void switch_mm_0460(struct mm_struct *mm) +{ + asm volatile (".chip 68040"); + + /* flush address translation cache (user entries) */ + asm volatile ("pflushan"); + + /* switch the root pointer */ + asm volatile ("movec %0,%%urp" : : "r" (mm->context)); + + if (CPU_IS_060) { + unsigned long tmp; + + /* clear user entries in the branch cache */ + asm volatile ( + "movec %%cacr,%0; " + "orl %1,%0; " + "movec %0,%%cacr" + : "=d" (tmp): "di" (0x00200000)); + } + + asm volatile (".chip 68k"); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ + if (prev != next) { + if (CPU_IS_020_OR_030) + switch_mm_0230(next); + else + switch_mm_0460(next); + } +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ + next_mm->context = virt_to_phys(next_mm->pgd); + + if (CPU_IS_020_OR_030) + switch_mm_0230(next_mm); + else + switch_mm_0460(next_mm); +} + +#else /* CONFIG_SUN3 */ +#include +#include + +extern unsigned long get_free_context(struct mm_struct *mm); +extern void clear_context(unsigned long context); + +/* set the context for a new task to unmapped */ +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context = SUN3_INVALID_CONTEXT; + return 0; +} + +/* find the context given to this process, and if it hasn't already + got one, go get one for it. */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + if(mm->context == SUN3_INVALID_CONTEXT) + mm->context = get_free_context(mm); +} + +/* flush context if allocated... */ +static inline void destroy_context(struct mm_struct *mm) +{ + if(mm->context != SUN3_INVALID_CONTEXT) + clear_context(mm->context); +} + +static inline void activate_context(struct mm_struct *mm) +{ + get_mmu_context(mm); + sun3_put_context(mm->context); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ + activate_context(tsk->mm); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ + activate_context(next_mm); +} + +#endif +#endif diff --git a/arch/m68k/include/asm/mmu_context_no.h b/arch/m68k/include/asm/mmu_context_no.h new file mode 100644 index 0000000..9ccee42 --- /dev/null +++ b/arch/m68k/include/asm/mmu_context_no.h @@ -0,0 +1,33 @@ +#ifndef __M68KNOMMU_MMU_CONTEXT_H +#define __M68KNOMMU_MMU_CONTEXT_H + +#include +#include +#include +#include + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + // mm->context = virt_to_phys(mm->pgd); + return(0); +} + +#define destroy_context(mm) do { } while(0) + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ +} + +#endif diff --git a/arch/m68k/include/asm/mmu_mm.h b/arch/m68k/include/asm/mmu_mm.h new file mode 100644 index 0000000..ccd36d2 --- /dev/null +++ b/arch/m68k/include/asm/mmu_mm.h @@ -0,0 +1,7 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_t; + +#endif diff --git a/arch/m68k/include/asm/mmu_no.h b/arch/m68k/include/asm/mmu_no.h new file mode 100644 index 0000000..e2da1e6 --- /dev/null +++ b/arch/m68k/include/asm/mmu_no.h @@ -0,0 +1,10 @@ +#ifndef __M68KNOMMU_MMU_H +#define __M68KNOMMU_MMU_H + +/* Copyright (C) 2002, David McCullough */ + +typedef struct { + unsigned long end_brk; +} mm_context_t; + +#endif /* __M68KNOMMU_MMU_H */ diff --git a/arch/m68k/include/asm/mmzone.h b/arch/m68k/include/asm/mmzone.h new file mode 100644 index 0000000..e1f1ec7 --- /dev/null +++ b/arch/m68k/include/asm/mmzone.h @@ -0,0 +1,9 @@ +#ifndef _ASM_M68K_MMZONE_H_ +#define _ASM_M68K_MMZONE_H_ + +extern pg_data_t pg_data_map[]; + +#define NODE_DATA(nid) (&pg_data_map[nid]) +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) + +#endif /* _ASM_M68K_MMZONE_H_ */ diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h new file mode 100644 index 0000000..79b59d1 --- /dev/null +++ b/arch/m68k/include/asm/module.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "module_no.h" +#else +#include "module_mm.h" +#endif diff --git a/arch/m68k/include/asm/module_mm.h b/arch/m68k/include/asm/module_mm.h new file mode 100644 index 0000000..382d20a --- /dev/null +++ b/arch/m68k/include/asm/module_mm.h @@ -0,0 +1,39 @@ +#ifndef _ASM_M68K_MODULE_H +#define _ASM_M68K_MODULE_H + +struct mod_arch_specific { + struct m68k_fixup_info *fixup_start, *fixup_end; +}; + +#define MODULE_ARCH_INIT { \ + .fixup_start = __start_fixup, \ + .fixup_end = __stop_fixup, \ +} + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + + +enum m68k_fixup_type { + m68k_fixup_memoffset, + m68k_fixup_vnode_shift, +}; + +struct m68k_fixup_info { + enum m68k_fixup_type type; + void *addr; +}; + +#define m68k_fixup(type, addr) \ + " .section \".m68k_fixup\",\"aw\"\n" \ + " .long " #type "," #addr "\n" \ + " .previous\n" + +extern struct m68k_fixup_info __start_fixup[], __stop_fixup[]; + +struct module; +extern void module_fixup(struct module *mod, struct m68k_fixup_info *start, + struct m68k_fixup_info *end); + +#endif /* _ASM_M68K_MODULE_H */ diff --git a/arch/m68k/include/asm/module_no.h b/arch/m68k/include/asm/module_no.h new file mode 100644 index 0000000..2e45ab5 --- /dev/null +++ b/arch/m68k/include/asm/module_no.h @@ -0,0 +1,11 @@ +#ifndef ASM_M68KNOMMU_MODULE_H +#define ASM_M68KNOMMU_MODULE_H + +struct mod_arch_specific { +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h new file mode 100644 index 0000000..d08bf62 --- /dev/null +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -0,0 +1,109 @@ +#ifndef _MOTOROLA_PGALLOC_H +#define _MOTOROLA_PGALLOC_H + +#include +#include + +extern pmd_t *get_pointer_table(void); +extern int free_pointer_table(pmd_t *); + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +{ + pte_t *pte; + + pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); + if (pte) { + __flush_page_to_ram(pte); + flush_tlb_kernel_page(pte); + nocache_page(pte); + } + + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + cache_page(pte); + free_page((unsigned long) pte); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) +{ + struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); + pte_t *pte; + + if(!page) + return NULL; + + pte = kmap(page); + if (pte) { + __flush_page_to_ram(pte); + flush_tlb_kernel_page(pte); + nocache_page(pte); + } + kunmap(pte); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t page) +{ + pgtable_page_dtor(page); + cache_page(kmap(page)); + kunmap(page); + __free_page(page); +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page) +{ + pgtable_page_dtor(page); + cache_page(kmap(page)); + kunmap(page); + __free_page(page); +} + + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) +{ + return get_pointer_table(); +} + +static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + return free_pointer_table(pmd); +} + +static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) +{ + return free_pointer_table(pmd); +} + + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + pmd_free(mm, (pmd_t *)pgd); +} + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return (pgd_t *)get_pointer_table(); +} + + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) +{ + pmd_set(pmd, pte); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) +{ + pmd_set(pmd, page_address(page)); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) +{ + pgd_set(pgd, pmd); +} + +#endif /* _MOTOROLA_PGALLOC_H */ diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h new file mode 100644 index 0000000..8e9a8a7 --- /dev/null +++ b/arch/m68k/include/asm/motorola_pgtable.h @@ -0,0 +1,291 @@ +#ifndef _MOTOROLA_PGTABLE_H +#define _MOTOROLA_PGTABLE_H + + +/* + * Definitions for MMU descriptors + */ +#define _PAGE_PRESENT 0x001 +#define _PAGE_SHORT 0x002 +#define _PAGE_RONLY 0x004 +#define _PAGE_ACCESSED 0x008 +#define _PAGE_DIRTY 0x010 +#define _PAGE_SUPER 0x080 /* 68040 supervisor only */ +#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ +#define _PAGE_NOCACHE030 0x040 /* 68030 no-cache mode */ +#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ +#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ +#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ +#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ + +#define _DESCTYPE_MASK 0x003 + +#define _CACHEMASK040 (~0x060) +#define _TABLE_MASK (0xfffffe00) + +#define _PAGE_TABLE (_PAGE_SHORT) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE) + +#define _PAGE_PROTNONE 0x004 +#define _PAGE_FILE 0x008 /* pagecache or swap? */ + +#ifndef __ASSEMBLY__ + +/* This is the cache mode to be used for pages containing page descriptors for + * processors >= '040. It is in pte_mknocache(), and the variable is defined + * and initialized in head.S */ +extern int m68k_pgtable_cachemode; + +/* This is the cache mode for normal pages, for supervisor access on + * processors >= '040. It is used in pte_mkcache(), and the variable is + * defined and initialized in head.S */ + +#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH) +#define m68k_supervisor_cachemode _PAGE_CACHE040W +#elif defined(CPU_M68040_OR_M68060_ONLY) +#define m68k_supervisor_cachemode _PAGE_CACHE040 +#elif defined(CPU_M68020_OR_M68030_ONLY) +#define m68k_supervisor_cachemode 0 +#else +extern int m68k_supervisor_cachemode; +#endif + +#if defined(CPU_M68040_OR_M68060_ONLY) +#define mm_cachebits _PAGE_CACHE040 +#elif defined(CPU_M68020_OR_M68030_ONLY) +#define mm_cachebits 0 +#else +extern unsigned long mm_cachebits; +#endif + +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits) + +/* Alternate definitions that are compile time constants, for + initializing protection_map. The cachebits are fixed later. */ +#define PAGE_NONE_C __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED_C __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) +#define PAGE_COPY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) +#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) + +/* + * The m68k can't do page protection for execute, and considers that the same are read. + * Also, write permissions imply read permissions. This is the closest we can get.. + */ +#define __P000 PAGE_NONE_C +#define __P001 PAGE_READONLY_C +#define __P010 PAGE_COPY_C +#define __P011 PAGE_COPY_C +#define __P100 PAGE_READONLY_C +#define __P101 PAGE_READONLY_C +#define __P110 PAGE_COPY_C +#define __P111 PAGE_COPY_C + +#define __S000 PAGE_NONE_C +#define __S001 PAGE_READONLY_C +#define __S010 PAGE_SHARED_C +#define __S011 PAGE_SHARED_C +#define __S100 PAGE_READONLY_C +#define __S101 PAGE_READONLY_C +#define __S110 PAGE_SHARED_C +#define __S111 PAGE_SHARED_C + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) +{ + unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED; + unsigned long *ptr = pmdp->pmd; + short i = 16; + while (--i >= 0) { + *ptr++ = ptbl; + ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16); + } +} + +static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) +{ + pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp); +} + +#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK)) +#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK)) +#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK)) + + +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE)) +#define pte_clear(mm,addr,ptep) ({ pte_val(*(ptep)) = 0; }) + +#define pte_page(pte) virt_to_page(__va(pte_val(pte))) +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE) +#define pmd_present(pmd) (pmd_val(pmd) & _PAGE_TABLE) +#define pmd_clear(pmdp) ({ \ + unsigned long *__ptr = pmdp->pmd; \ + short __i = 16; \ + while (--__i >= 0) \ + *__ptr++ = 0; \ +}) +#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) + + +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE) +#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE) +#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; }) +#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT)) + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_RONLY); } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_special(pte_t pte) { return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_RONLY; return pte; } +static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_RONLY; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mknocache(pte_t pte) +{ + pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode; + return pte; +} +static inline pte_t pte_mkcache(pte_t pte) +{ + pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode; + return pte; +} +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address)) + +#define pgd_index(address) ((address) >> PGDIR_SHIFT) + +/* to find an entry in a page-table-directory */ +static inline pgd_t *pgd_offset(const struct mm_struct *mm, + unsigned long address) +{ + return mm->pgd + pgd_index(address); +} + +#define swapper_pg_dir kernel_pg_dir +extern pgd_t kernel_pg_dir[128]; + +static inline pgd_t *pgd_offset_k(unsigned long address) +{ + return kernel_pg_dir + (address >> PGDIR_SHIFT); +} + + +/* Find an entry in the second-level page table.. */ +static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) +{ + return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1)); +} + +/* Find an entry in the third-level page table.. */ +static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address) +{ + return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); +} + +#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) +#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address) +#define pte_unmap(pte) ((void)0) +#define pte_unmap_nested(pte) ((void)0) + +/* + * Allocate and free page tables. The xxx_kernel() versions are + * used to allocate a kernel page table - this turns on ASN bits + * if any. + */ + +/* Prior to calling these routines, the page should have been flushed + * from both the cache and ATC, or the CPU might not notice that the + * cache setting for the page has been changed. -jskov + */ +static inline void nocache_page(void *vaddr) +{ + unsigned long addr = (unsigned long)vaddr; + + if (CPU_IS_040_OR_060) { + pgd_t *dir; + pmd_t *pmdp; + pte_t *ptep; + + dir = pgd_offset_k(addr); + pmdp = pmd_offset(dir, addr); + ptep = pte_offset_kernel(pmdp, addr); + *ptep = pte_mknocache(*ptep); + } +} + +static inline void cache_page(void *vaddr) +{ + unsigned long addr = (unsigned long)vaddr; + + if (CPU_IS_040_OR_060) { + pgd_t *dir; + pmd_t *pmdp; + pte_t *ptep; + + dir = pgd_offset_k(addr); + pmdp = pmd_offset(dir, addr); + ptep = pte_offset_kernel(pmdp, addr); + *ptep = pte_mkcache(*ptep); + } +} + +#define PTE_FILE_MAX_BITS 28 + +static inline unsigned long pte_to_pgoff(pte_t pte) +{ + return pte.pte >> 4; +} + +static inline pte_t pgoff_to_pte(unsigned off) +{ + pte_t pte = { (off << 4) + _PAGE_FILE }; + return pte; +} + +/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ +#define __swp_type(x) (((x).val >> 4) & 0xff) +#define __swp_offset(x) ((x).val >> 12) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#endif /* !__ASSEMBLY__ */ +#endif /* _MOTOROLA_PGTABLE_H */ diff --git a/arch/m68k/include/asm/movs.h b/arch/m68k/include/asm/movs.h new file mode 100644 index 0000000..67dbea3 --- /dev/null +++ b/arch/m68k/include/asm/movs.h @@ -0,0 +1,55 @@ +#ifndef __MOVS_H__ +#define __MOVS_H__ + +/* +** movs.h +** +** Inline assembly macros to generate movs & related instructions +*/ + +/* Set DFC register value */ + +#define SET_DFC(x) \ + __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x)); + +/* Get DFC register value */ + +#define GET_DFC(x) \ + __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : ); + +/* Set SFC register value */ + +#define SET_SFC(x) \ + __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x)); + +/* Get SFC register value */ + +#define GET_SFC(x) \ + __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : ); + +#define SET_VBR(x) \ + __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x)); + +#define GET_VBR(x) \ + __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : ); + +/* Set a byte using the "movs" instruction */ + +#define SET_CONTROL_BYTE(addr,value) \ + __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr)); + +/* Get a byte using the "movs" instruction */ + +#define GET_CONTROL_BYTE(addr,value) \ + __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr)); + +/* Set a (long)word using the "movs" instruction */ + +#define SET_CONTROL_WORD(addr,value) \ + __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr)); + +/* Get a (long)word using the "movs" instruction */ + +#define GET_CONTROL_WORD(addr,value) \ + __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr)); +#endif diff --git a/arch/m68k/include/asm/msgbuf.h b/arch/m68k/include/asm/msgbuf.h new file mode 100644 index 0000000..243cb79 --- /dev/null +++ b/arch/m68k/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _M68K_MSGBUF_H +#define _M68K_MSGBUF_H + +/* + * The msqid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _M68K_MSGBUF_H */ diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h new file mode 100644 index 0000000..458c1f7 --- /dev/null +++ b/arch/m68k/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/m68k/include/asm/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h new file mode 100644 index 0000000..b810431 --- /dev/null +++ b/arch/m68k/include/asm/mvme147hw.h @@ -0,0 +1,113 @@ +#ifndef _MVME147HW_H_ +#define _MVME147HW_H_ + +#include + +typedef struct { + unsigned char + ctrl, + bcd_sec, + bcd_min, + bcd_hr, + bcd_dow, + bcd_dom, + bcd_mth, + bcd_year; +} MK48T02; + +#define RTC_WRITE 0x80 +#define RTC_READ 0x40 +#define RTC_STOP 0x20 + +#define m147_rtc ((MK48T02 * volatile)0xfffe07f8) + + +struct pcc_regs { + volatile u_long dma_tadr; + volatile u_long dma_dadr; + volatile u_long dma_bcr; + volatile u_long dma_hr; + volatile u_short t1_preload; + volatile u_short t1_count; + volatile u_short t2_preload; + volatile u_short t2_count; + volatile u_char t1_int_cntrl; + volatile u_char t1_cntrl; + volatile u_char t2_int_cntrl; + volatile u_char t2_cntrl; + volatile u_char ac_fail; + volatile u_char watchdog; + volatile u_char lpt_intr; + volatile u_char lpt_cntrl; + volatile u_char dma_intr; + volatile u_char dma_cntrl; + volatile u_char bus_error; + volatile u_char dma_status; + volatile u_char abort; + volatile u_char ta_fnctl; + volatile u_char serial_cntrl; + volatile u_char general_cntrl; + volatile u_char lan_cntrl; + volatile u_char general_status; + volatile u_char scsi_interrupt; + volatile u_char slave; + volatile u_char soft1_cntrl; + volatile u_char int_base; + volatile u_char soft2_cntrl; + volatile u_char revision_level; + volatile u_char lpt_data; + volatile u_char lpt_status; + }; + +#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000) + + +#define PCC_INT_ENAB 0x08 + +#define PCC_TIMER_INT_CLR 0x80 +#define PCC_TIMER_PRELOAD 63936l + +#define PCC_LEVEL_ABORT 0x07 +#define PCC_LEVEL_SERIAL 0x04 +#define PCC_LEVEL_ETH 0x04 +#define PCC_LEVEL_TIMER1 0x04 +#define PCC_LEVEL_SCSI_PORT 0x04 +#define PCC_LEVEL_SCSI_DMA 0x04 + +#define PCC_IRQ_AC_FAIL (IRQ_USER+0) +#define PCC_IRQ_BERR (IRQ_USER+1) +#define PCC_IRQ_ABORT (IRQ_USER+2) +/* #define PCC_IRQ_SERIAL (IRQ_USER+3) */ +#define PCC_IRQ_PRINTER (IRQ_USER+7) +#define PCC_IRQ_TIMER1 (IRQ_USER+8) +#define PCC_IRQ_TIMER2 (IRQ_USER+9) +#define PCC_IRQ_SOFTWARE1 (IRQ_USER+10) +#define PCC_IRQ_SOFTWARE2 (IRQ_USER+11) + + +#define M147_SCC_A_ADDR 0xfffe3002 +#define M147_SCC_B_ADDR 0xfffe3000 +#define M147_SCC_PCLK 5000000 + +#define MVME147_IRQ_SCSI_PORT (IRQ_USER+0x45) +#define MVME147_IRQ_SCSI_DMA (IRQ_USER+0x46) + +/* SCC interrupts, for MVME147 */ + +#define MVME147_IRQ_TYPE_PRIO 0 +#define MVME147_IRQ_SCC_BASE (IRQ_USER+32) +#define MVME147_IRQ_SCCB_TX (IRQ_USER+32) +#define MVME147_IRQ_SCCB_STAT (IRQ_USER+34) +#define MVME147_IRQ_SCCB_RX (IRQ_USER+36) +#define MVME147_IRQ_SCCB_SPCOND (IRQ_USER+38) +#define MVME147_IRQ_SCCA_TX (IRQ_USER+40) +#define MVME147_IRQ_SCCA_STAT (IRQ_USER+42) +#define MVME147_IRQ_SCCA_RX (IRQ_USER+44) +#define MVME147_IRQ_SCCA_SPCOND (IRQ_USER+46) + +#define MVME147_LANCE_BASE 0xfffe1800 +#define MVME147_LANCE_IRQ (IRQ_USER+4) + +#define ETHERNET_ADDRESS 0xfffe0778 + +#endif diff --git a/arch/m68k/include/asm/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h new file mode 100644 index 0000000..6117f56 --- /dev/null +++ b/arch/m68k/include/asm/mvme16xhw.h @@ -0,0 +1,111 @@ +#ifndef _M68K_MVME16xHW_H_ +#define _M68K_MVME16xHW_H_ + +#include + +/* Board ID data structure - pointer to this retrieved from Bug by head.S */ + +/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */ + +extern long mvme_bdid_ptr; + +typedef struct { + char bdid[4]; + u_char rev, mth, day, yr; + u_short size, reserved; + u_short brdno; + char brdsuffix[2]; + u_long options; + u_short clun, dlun, ctype, dnum; + u_long option2; +} t_bdid, *p_bdid; + + +typedef struct { + u_char ack_icr, + flt_icr, + sel_icr, + pe_icr, + bsy_icr, + spare1, + isr, + cr, + spare2, + spare3, + spare4, + data; +} MVMElp, *MVMElpPtr; + +#define MVME_LPR_BASE 0xfff42030 + +#define mvmelp ((*(volatile MVMElpPtr)(MVME_LPR_BASE))) + +typedef struct { + unsigned char + ctrl, + bcd_sec, + bcd_min, + bcd_hr, + bcd_dow, + bcd_dom, + bcd_mth, + bcd_year; +} MK48T08_t, *MK48T08ptr_t; + +#define RTC_WRITE 0x80 +#define RTC_READ 0x40 +#define RTC_STOP 0x20 + +#define MVME_RTC_BASE 0xfffc1ff8 + +#define MVME_I596_BASE 0xfff46000 + +#define MVME_SCC_A_ADDR 0xfff45005 +#define MVME_SCC_B_ADDR 0xfff45001 +#define MVME_SCC_PCLK 10000000 + +#define MVME162_IRQ_TYPE_PRIO 0 + +#define MVME167_IRQ_PRN (IRQ_USER+20) +#define MVME16x_IRQ_I596 (IRQ_USER+23) +#define MVME16x_IRQ_SCSI (IRQ_USER+21) +#define MVME16x_IRQ_FLY (IRQ_USER+63) +#define MVME167_IRQ_SER_ERR (IRQ_USER+28) +#define MVME167_IRQ_SER_MODEM (IRQ_USER+29) +#define MVME167_IRQ_SER_TX (IRQ_USER+30) +#define MVME167_IRQ_SER_RX (IRQ_USER+31) +#define MVME16x_IRQ_TIMER (IRQ_USER+25) +#define MVME167_IRQ_ABORT (IRQ_USER+46) +#define MVME162_IRQ_ABORT (IRQ_USER+30) + +/* SCC interrupts, for MVME162 */ +#define MVME162_IRQ_SCC_BASE (IRQ_USER+0) +#define MVME162_IRQ_SCCB_TX (IRQ_USER+0) +#define MVME162_IRQ_SCCB_STAT (IRQ_USER+2) +#define MVME162_IRQ_SCCB_RX (IRQ_USER+4) +#define MVME162_IRQ_SCCB_SPCOND (IRQ_USER+6) +#define MVME162_IRQ_SCCA_TX (IRQ_USER+8) +#define MVME162_IRQ_SCCA_STAT (IRQ_USER+10) +#define MVME162_IRQ_SCCA_RX (IRQ_USER+12) +#define MVME162_IRQ_SCCA_SPCOND (IRQ_USER+14) + +/* MVME162 version register */ + +#define MVME162_VERSION_REG 0xfff4202e + +extern unsigned short mvme16x_config; + +/* Lower 8 bits must match the revision register in the MC2 chip */ + +#define MVME16x_CONFIG_SPEED_32 0x0001 +#define MVME16x_CONFIG_NO_VMECHIP2 0x0002 +#define MVME16x_CONFIG_NO_SCSICHIP 0x0004 +#define MVME16x_CONFIG_NO_ETHERNET 0x0008 +#define MVME16x_CONFIG_GOT_FPU 0x0010 + +#define MVME16x_CONFIG_GOT_LP 0x0100 +#define MVME16x_CONFIG_GOT_CD2401 0x0200 +#define MVME16x_CONFIG_GOT_SCCA 0x0400 +#define MVME16x_CONFIG_GOT_SCCB 0x0800 + +#endif diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h new file mode 100644 index 0000000..0299f6a --- /dev/null +++ b/arch/m68k/include/asm/nettel.h @@ -0,0 +1,108 @@ +/****************************************************************************/ + +/* + * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. + * + * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) + * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) + * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) + */ + +/****************************************************************************/ +#ifndef nettel_h +#define nettel_h +/****************************************************************************/ + + +/****************************************************************************/ +#ifdef CONFIG_NETtel +/****************************************************************************/ + +#ifdef CONFIG_COLDFIRE +#include +#include +#endif + +/*---------------------------------------------------------------------------*/ +#if defined(CONFIG_M5307) +/* + * NETtel/5307 based hardware first. DTR/DCD lines are wired to + * GPIO lines. Most of the LED's are driver through a latch + * connected to CS2. + */ +#define MCFPP_DCD1 0x0001 +#define MCFPP_DCD0 0x0002 +#define MCFPP_DTR1 0x0004 +#define MCFPP_DTR0 0x0008 + +#define NETtel_LEDADDR 0x30400000 + +#ifndef __ASSEMBLY__ + +extern volatile unsigned short ppdata; + +/* + * These functions defined to give quasi generic access to the + * PPIO bits used for DTR/DCD. + */ +static __inline__ unsigned int mcf_getppdata(void) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + return((unsigned int) *pp); +} + +static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + ppdata = (ppdata & ~mask) | bits; + *pp = ppdata; +} +#endif + +/*---------------------------------------------------------------------------*/ +#elif defined(CONFIG_M5206e) +/* + * NETtel/5206e based hardware has leds on latch on CS3. + * No support modem for lines?? + */ +#define NETtel_LEDADDR 0x50000000 + +/*---------------------------------------------------------------------------*/ +#elif defined(CONFIG_M5272) +/* + * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. + */ +#define MCFPP_DCD0 0x0080 +#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ +#define MCFPP_DTR0 0x0040 +#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ + +#ifndef __ASSEMBLY__ +/* + * These functions defined to give quasi generic access to the + * PPIO bits used for DTR/DCD. + */ +static __inline__ unsigned int mcf_getppdata(void) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); + return((unsigned int) *pp); +} + +static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) +{ + volatile unsigned short *pp; + pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); + *pp = (*pp & ~mask) | bits; +} +#endif + +#endif +/*---------------------------------------------------------------------------*/ + +/****************************************************************************/ +#endif /* CONFIG_NETtel */ +/****************************************************************************/ +#endif /* nettel_h */ diff --git a/arch/m68k/include/asm/nubus.h b/arch/m68k/include/asm/nubus.h new file mode 100644 index 0000000..d6be997 --- /dev/null +++ b/arch/m68k/include/asm/nubus.h @@ -0,0 +1,46 @@ +#ifndef _ASM_M68K_NUBUS_H +#define _ASM_M68K_NUBUS_H + +#include + +#define nubus_readb raw_inb +#define nubus_readw raw_inw +#define nubus_readl raw_inl + +#define nubus_writeb raw_outb +#define nubus_writew raw_outw +#define nubus_writel raw_outl + +#define nubus_memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define nubus_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define nubus_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +static inline void *nubus_remap_nocache_ser(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void *nubus_remap_nocache_nonser(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); +} + +static inline void *nbus_remap_writethrough(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} + +static inline void *nubus_remap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +#define nubus_unmap iounmap +#define nubus_iounmap iounmap +#define nubus_ioremap nubus_remap_nocache_ser + +#endif /* _ASM_NUBUS_H */ diff --git a/arch/m68k/include/asm/openprom.h b/arch/m68k/include/asm/openprom.h new file mode 100644 index 0000000..d33cdad --- /dev/null +++ b/arch/m68k/include/asm/openprom.h @@ -0,0 +1,312 @@ +#ifndef __SPARC_OPENPROM_H +#define __SPARC_OPENPROM_H + +/* openprom.h: Prom structures and defines for access to the OPENBOOT + * prom routines and data areas. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + + +/* Empirical constants... */ +#ifdef CONFIG_SUN3 +#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/ +#define LINUX_OPPROM_BEGVM 0x0fef0000 +#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */ +#else +#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ +#define LINUX_OPPROM_BEGVM 0xffd00000 +#define LINUX_OPPROM_ENDVM 0xfff00000 +#define LINUX_OPPROM_MAGIC 0x10010407 +#endif + +#ifndef __ASSEMBLY__ +/* V0 prom device operations. */ +struct linux_dev_v0_funcs { + int (*v0_devopen)(char *device_str); + int (*v0_devclose)(int dev_desc); + int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_seekdev)(int dev_desc, long logical_offst, int from); +}; + +/* V2 and later prom device operations. */ +struct linux_dev_v2_funcs { + int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ + char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); + void (*v2_dumb_mem_free)(char *va, unsigned sz); + + /* To map devices into virtual I/O space. */ + char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); + void (*v2_dumb_munmap)(char *virta, unsigned size); + + int (*v2_dev_open)(char *devpath); + void (*v2_dev_close)(int d); + int (*v2_dev_read)(int d, char *buf, int nbytes); + int (*v2_dev_write)(int d, char *buf, int nbytes); + int (*v2_dev_seek)(int d, int hi, int lo); + + /* Never issued (multistage load support) */ + void (*v2_wheee2)(void); + void (*v2_wheee3)(void); +}; + +struct linux_mlist_v0 { + struct linux_mlist_v0 *theres_more; + char *start_adr; + unsigned num_bytes; +}; + +struct linux_mem_v0 { + struct linux_mlist_v0 **v0_totphys; + struct linux_mlist_v0 **v0_prommap; + struct linux_mlist_v0 **v0_available; /* What we can use */ +}; + +/* Arguments sent to the kernel from the boot prompt. */ +struct linux_arguments_v0 { + char *argv[8]; + char args[100]; + char boot_dev[2]; + int boot_dev_ctrl; + int boot_dev_unit; + int dev_partition; + char *kernel_file_name; + void *aieee1; /* XXX */ +}; + +/* V2 and up boot things. */ +struct linux_bootargs_v2 { + char **bootpath; + char **bootargs; + int *fd_stdin; + int *fd_stdout; +}; + +#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) +struct linux_romvec { + char *pv_initsp; + int (*pv_startmon)(void); + + int *diagberr; + + struct linux_arguments_v0 **pv_v0bootargs; + unsigned *pv_sun3mem; + + unsigned char (*pv_getchar)(void); + int (*pv_putchar)(int ch); + int (*pv_nbgetchar)(void); + int (*pv_nbputchar)(int ch); + unsigned char *pv_echo; + unsigned char *pv_insource; + unsigned char *pv_outsink; + + int (*pv_getkey)(void); + int (*pv_initgetkey)(void); + unsigned int *pv_translation; + unsigned char *pv_keybid; + int *pv_screen_x; + int *pv_screen_y; + struct keybuf *pv_keybuf; + + char *pv_monid; + + /* + * Frame buffer output and terminal emulation + */ + + int (*pv_fbwritechar)(char); + int *pv_fbaddr; + char **pv_font; + int (*pv_fbwritestr)(char); + + void (*pv_reboot)(char *bootstr); + + /* + * Line input and parsing + */ + + unsigned char *pv_linebuf; + unsigned char **pv_lineptr; + int *pv_linesize; + int (*pv_getline)(void); + unsigned char (*pv_getnextchar)(void); + unsigned char (*pv_peeknextchar)(void); + int *pv_fbthere; + int (*pv_getnum)(void); + + void (*pv_printf)(const char *fmt, ...); + int (*pv_printhex)(void); + + unsigned char *pv_leds; + int (*pv_setleds)(void); + + /* + * Non-maskable interrupt (nmi) information + */ + + int (*pv_nmiaddr)(void); + int (*pv_abortentry)(void); + int *pv_nmiclock; + + int *pv_fbtype; + + /* + * Assorted other things + */ + + unsigned pv_romvers; + struct globram *pv_globram; + char *pv_kbdzscc; + + int *pv_keyrinit; + unsigned char *pv_keyrtick; + unsigned *pv_memoryavail; + long *pv_resetaddr; + long *pv_resetmap; + + void (*pv_halt)(void); + unsigned char *pv_memorybitmap; + +#ifdef CONFIG_SUN3 + void (*pv_setctxt)(int ctxt, char *va, int pmeg); + void (*pv_vector_cmd)(void); + int dummy1z; + int dummy2z; + int dummy3z; + int dummy4z; +#endif +}; +#else +/* The top level PROM vector. */ +struct linux_romvec { + /* Version numbers. */ + unsigned int pv_magic_cookie; + unsigned int pv_romvers; + unsigned int pv_plugin_revision; + unsigned int pv_printrev; + + /* Version 0 memory descriptors. */ + struct linux_mem_v0 pv_v0mem; + + /* Node operations. */ + struct linux_nodeops *pv_nodeops; + + char **pv_bootstr; + struct linux_dev_v0_funcs pv_v0devops; + + char *pv_stdin; + char *pv_stdout; +#define PROMDEV_KBD 0 /* input from keyboard */ +#define PROMDEV_SCREEN 0 /* output to screen */ +#define PROMDEV_TTYA 1 /* in/out to ttya */ +#define PROMDEV_TTYB 2 /* in/out to ttyb */ + + /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ + int (*pv_getchar)(void); + void (*pv_putchar)(int ch); + + /* Non-blocking variants. */ + int (*pv_nbgetchar)(void); + int (*pv_nbputchar)(int ch); + + void (*pv_putstr)(char *str, int len); + + /* Miscellany. */ + void (*pv_reboot)(char *bootstr); + void (*pv_printf)(__const__ char *fmt, ...); + void (*pv_abort)(void); + __volatile__ int *pv_ticks; + void (*pv_halt)(void); + void (**pv_synchook)(void); + + /* Evaluate a forth string, not different proto for V0 and V2->up. */ + union { + void (*v0_eval)(int len, char *str); + void (*v2_eval)(char *str); + } pv_fortheval; + + struct linux_arguments_v0 **pv_v0bootargs; + + /* Get ether address. */ + unsigned int (*pv_enaddr)(int d, char *enaddr); + + struct linux_bootargs_v2 pv_v2bootargs; + struct linux_dev_v2_funcs pv_v2devops; + + int filler[15]; + + /* This one is sun4c/sun4 only. */ + void (*pv_setctxt)(int ctxt, char *va, int pmeg); + + /* Prom version 3 Multiprocessor routines. This stuff is crazy. + * No joke. Calling these when there is only one cpu probably + * crashes the machine, have to test this. :-) + */ + + /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context + * 'thiscontext' executing at address 'prog_counter' + */ + int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, + int thiscontext, char *prog_counter); + + /* v3_cpustop() will cause cpu 'whichcpu' to stop executing + * until a resume cpu call is made. + */ + int (*v3_cpustop)(unsigned int whichcpu); + + /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or + * resume cpu call is made. + */ + int (*v3_cpuidle)(unsigned int whichcpu); + + /* v3_cpuresume() will resume processor 'whichcpu' executing + * starting with whatever 'pc' and 'npc' were left at the + * last 'idle' or 'stop' call. + */ + int (*v3_cpuresume)(unsigned int whichcpu); +}; +#endif + +/* Routines for traversing the prom device tree. */ +struct linux_nodeops { + int (*no_nextnode)(int node); + int (*no_child)(int node); + int (*no_proplen)(int node, char *name); + int (*no_getprop)(int node, char *name, char *val); + int (*no_setprop)(int node, char *name, char *val, int len); + char * (*no_nextprop)(int node, char *name); +}; + +/* More fun PROM structures for device probing. */ +#define PROMREG_MAX 16 +#define PROMVADDR_MAX 16 +#define PROMINTR_MAX 15 + +struct linux_prom_registers { + int which_io; /* is this in OBIO space? */ + char *phys_addr; /* The physical address of this register */ + int reg_size; /* How many bytes does this register take up? */ +}; + +struct linux_prom_irqs { + int pri; /* IRQ priority */ + int vector; /* This is foobar, what does it do? */ +}; + +/* Element of the "ranges" vector */ +struct linux_prom_ranges { + unsigned int ot_child_space; + unsigned int ot_child_base; /* Bus feels this */ + unsigned int ot_parent_space; + unsigned int ot_parent_base; /* CPU looks from here */ + unsigned int or_size; +}; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/arch/m68k/include/asm/oplib.h b/arch/m68k/include/asm/oplib.h new file mode 100644 index 0000000..f082d03 --- /dev/null +++ b/arch/m68k/include/asm/oplib.h @@ -0,0 +1,291 @@ +/* + * oplib.h: Describes the interface and available routines in the + * Linux Prom library. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_OPLIB_H +#define __SPARC_OPLIB_H + +#include + +/* The master romvec pointer... */ +extern struct linux_romvec *romvec; + +/* Enumeration to describe the prom major version we have detected. */ +enum prom_major_version { + PROM_V0, /* Original sun4c V0 prom */ + PROM_V2, /* sun4c and early sun4m V2 prom */ + PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ + PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ +}; + +extern enum prom_major_version prom_vers; +/* Revision, and firmware revision. */ +extern unsigned int prom_rev, prom_prev; + +/* Root node of the prom device tree, this stays constant after + * initialization is complete. + */ +extern int prom_root_node; + +/* Pointer to prom structure containing the device tree traversal + * and usage utility functions. Only prom-lib should use these, + * users use the interface defined by the library only! + */ +extern struct linux_nodeops *prom_nodeops; + +/* The functions... */ + +/* You must call prom_init() before using any of the library services, + * preferably as early as possible. Pass it the romvec pointer. + */ +extern void prom_init(struct linux_romvec *rom_ptr); + +/* Boot argument acquisition, returns the boot command line string. */ +extern char *prom_getbootargs(void); + +/* Device utilities. */ + +/* Map and unmap devices in IO space at virtual addresses. Note that the + * virtual address you pass is a request and the prom may put your mappings + * somewhere else, so check your return value as that is where your new + * mappings really are! + * + * Another note, these are only available on V2 or higher proms! + */ +extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); +extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); + +/* Device operations. */ + +/* Open the device described by the passed string. Note, that the format + * of the string is different on V0 vs. V2->higher proms. The caller must + * know what he/she is doing! Returns the device descriptor, an int. + */ +extern int prom_devopen(char *device_string); + +/* Close a previously opened device described by the passed integer + * descriptor. + */ +extern int prom_devclose(int device_handle); + +/* Do a seek operation on the device described by the passed integer + * descriptor. + */ +extern void prom_seek(int device_handle, unsigned int seek_hival, + unsigned int seek_lowval); + +/* Machine memory configuration routine. */ + +/* This function returns a V0 format memory descriptor table, it has three + * entries. One for the total amount of physical ram on the machine, one + * for the amount of physical ram available, and one describing the virtual + * areas which are allocated by the prom. So, in a sense the physical + * available is a calculation of the total physical minus the physical mapped + * by the prom with virtual mappings. + * + * These lists are returned pre-sorted, this should make your life easier + * since the prom itself is way too lazy to do such nice things. + */ +extern struct linux_mem_v0 *prom_meminfo(void); + +/* Miscellaneous routines, don't really fit in any category per se. */ + +/* Reboot the machine with the command line passed. */ +extern void prom_reboot(char *boot_command); + +/* Evaluate the forth string passed. */ +extern void prom_feval(char *forth_string); + +/* Enter the prom, with possibility of continuation with the 'go' + * command in newer proms. + */ +extern void prom_cmdline(void); + +/* Enter the prom, with no chance of continuation for the stand-alone + * which calls this. + */ +extern void prom_halt(void); + +/* Set the PROM 'sync' callback function to the passed function pointer. + * When the user gives the 'sync' command at the prom prompt while the + * kernel is still active, the prom will call this routine. + * + * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX + */ +typedef void (*sync_func_t)(void); +extern void prom_setsync(sync_func_t func_ptr); + +/* Acquire the IDPROM of the root node in the prom device tree. This + * gets passed a buffer where you would like it stuffed. The return value + * is the format type of this idprom or 0xff on error. + */ +extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); + +/* Get the prom major version. */ +extern int prom_version(void); + +/* Get the prom plugin revision. */ +extern int prom_getrev(void); + +/* Get the prom firmware revision. */ +extern int prom_getprev(void); + +/* Character operations to/from the console.... */ + +/* Non-blocking get character from console. */ +extern int prom_nbgetchar(void); + +/* Non-blocking put character to console. */ +extern int prom_nbputchar(char character); + +/* Blocking get character from console. */ +extern char prom_getchar(void); + +/* Blocking put character to console. */ +extern void prom_putchar(char character); + +/* Prom's internal printf routine, don't use in kernel/boot code. */ +void prom_printf(char *fmt, ...); + +/* Query for input device type */ + +enum prom_input_device { + PROMDEV_IKBD, /* input from keyboard */ + PROMDEV_ITTYA, /* input from ttya */ + PROMDEV_ITTYB, /* input from ttyb */ + PROMDEV_I_UNK, +}; + +extern enum prom_input_device prom_query_input_device(void); + +/* Query for output device type */ + +enum prom_output_device { + PROMDEV_OSCREEN, /* to screen */ + PROMDEV_OTTYA, /* to ttya */ + PROMDEV_OTTYB, /* to ttyb */ + PROMDEV_O_UNK, +}; + +extern enum prom_output_device prom_query_output_device(void); + +/* Multiprocessor operations... */ + +/* Start the CPU with the given device tree node, context table, and context + * at the passed program counter. + */ +extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, + int context, char *program_counter); + +/* Stop the CPU with the passed device tree node. */ +extern int prom_stopcpu(int cpunode); + +/* Idle the CPU with the passed device tree node. */ +extern int prom_idlecpu(int cpunode); + +/* Re-Start the CPU with the passed device tree node. */ +extern int prom_restartcpu(int cpunode); + +/* PROM memory allocation facilities... */ + +/* Allocated at possibly the given virtual address a chunk of the + * indicated size. + */ +extern char *prom_alloc(char *virt_hint, unsigned int size); + +/* Free a previously allocated chunk. */ +extern void prom_free(char *virt_addr, unsigned int size); + +/* Sun4/sun4c specific memory-management startup hook. */ + +/* Map the passed segment in the given context at the passed + * virtual address. + */ +extern void prom_putsegment(int context, unsigned long virt_addr, + int physical_segment); + +/* PROM device tree traversal functions... */ + +/* Get the child node of the given node, or zero if no child exists. */ +extern int prom_getchild(int parent_node); + +/* Get the next sibling node of the given node, or zero if no further + * siblings exist. + */ +extern int prom_getsibling(int node); + +/* Get the length, at the passed node, of the given property type. + * Returns -1 on error (ie. no such property at this node). + */ +extern int prom_getproplen(int thisnode, char *property); + +/* Fetch the requested property using the given buffer. Returns + * the number of bytes the prom put into your buffer or -1 on error. + */ +extern int prom_getproperty(int thisnode, char *property, + char *prop_buffer, int propbuf_size); + +/* Acquire an integer property. */ +extern int prom_getint(int node, char *property); + +/* Acquire an integer property, with a default value. */ +extern int prom_getintdefault(int node, char *property, int defval); + +/* Acquire a boolean property, 0=FALSE 1=TRUE. */ +extern int prom_getbool(int node, char *prop); + +/* Acquire a string property, null string on error. */ +extern void prom_getstring(int node, char *prop, char *buf, int bufsize); + +/* Does the passed node have the given "name"? YES=1 NO=0 */ +extern int prom_nodematch(int thisnode, char *name); + +/* Search all siblings starting at the passed node for "name" matching + * the given string. Returns the node on success, zero on failure. + */ +extern int prom_searchsiblings(int node_start, char *name); + +/* Return the first property type, as a string, for the given node. + * Returns a null string on error. + */ +extern char *prom_firstprop(int node); + +/* Returns the next property after the passed property for the given + * node. Returns null string on failure. + */ +extern char *prom_nextprop(int node, char *prev_property); + +/* Returns 1 if the specified node has given property. */ +extern int prom_node_has_property(int node, char *property); + +/* Set the indicated property at the given node with the passed value. + * Returns the number of bytes of your value that the prom took. + */ +extern int prom_setprop(int node, char *prop_name, char *prop_value, + int value_size); + +extern int prom_pathtoinode(char *path); +extern int prom_inst2pkg(int); + +/* Dorking with Bus ranges... */ + +/* Adjust reg values with the passed ranges. */ +extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs, + struct linux_prom_ranges *rangep, int nranges); + +/* Adjust child ranges with the passed parent ranges. */ +extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges, + struct linux_prom_ranges *pranges, int npranges); + +/* Apply promlib probed OBIO ranges to registers. */ +extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); + +/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ +extern void prom_apply_generic_ranges(int node, int parent, + struct linux_prom_registers *sbusregs, int nregs); + + +#endif /* !(__SPARC_OPLIB_H) */ diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h new file mode 100644 index 0000000..f2b4480 --- /dev/null +++ b/arch/m68k/include/asm/page.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "page_no.h" +#else +#include "page_mm.h" +#endif diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h new file mode 100644 index 0000000..a34b8ba --- /dev/null +++ b/arch/m68k/include/asm/page_mm.h @@ -0,0 +1,228 @@ +#ifndef _M68K_PAGE_H +#define _M68K_PAGE_H + +#include + +/* PAGE_SHIFT determines the page size */ +#ifndef CONFIG_SUN3 +#define PAGE_SHIFT (12) +#else +#define PAGE_SHIFT (13) +#endif +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include + +#if PAGE_SHIFT < 13 +#define THREAD_SIZE (8192) +#else +#define THREAD_SIZE PAGE_SIZE +#endif + +#ifndef __ASSEMBLY__ + +#include + +#include + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +/* + * We don't need to check for alignment etc. + */ +#ifdef CPU_M68040_OR_M68060_ONLY +static inline void copy_page(void *to, void *from) +{ + unsigned long tmp; + + __asm__ __volatile__("1:\t" + ".chip 68040\n\t" + "move16 %1@+,%0@+\n\t" + "move16 %1@+,%0@+\n\t" + ".chip 68k\n\t" + "dbra %2,1b\n\t" + : "=a" (to), "=a" (from), "=d" (tmp) + : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1) + ); +} + +static inline void clear_page(void *page) +{ + unsigned long tmp; + unsigned long *sp = page; + + *sp++ = 0; + *sp++ = 0; + *sp++ = 0; + *sp++ = 0; + + __asm__ __volatile__("1:\t" + ".chip 68040\n\t" + "move16 %2@+,%0@+\n\t" + ".chip 68k\n\t" + "subqw #8,%2\n\t" + "subqw #8,%2\n\t" + "dbra %1,1b\n\t" + : "=a" (sp), "=d" (tmp) + : "a" (page), "0" (sp), + "1" ((PAGE_SIZE - 16) / 16 - 1)); +} + +#else +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) +#endif + +#define clear_user_page(addr, vaddr, page) \ + do { clear_page(addr); \ + flush_dcache_page(page); \ + } while (0) +#define copy_user_page(to, from, vaddr, page) \ + do { copy_page(to, from); \ + flush_dcache_page(page); \ + } while (0) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#endif /* !__ASSEMBLY__ */ + +#include + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +extern unsigned long m68k_memoffset; + +#ifndef CONFIG_SUN3 + +#define WANT_PAGE_VIRTUAL + +static inline unsigned long ___pa(void *vaddr) +{ + unsigned long paddr; + asm ( + "1: addl #0,%0\n" + m68k_fixup(%c2, 1b+2) + : "=r" (paddr) + : "0" (vaddr), "i" (m68k_fixup_memoffset)); + return paddr; +} +#define __pa(vaddr) ___pa((void *)(vaddr)) +static inline void *__va(unsigned long paddr) +{ + void *vaddr; + asm ( + "1: subl #0,%0\n" + m68k_fixup(%c2, 1b+2) + : "=r" (vaddr) + : "0" (paddr), "i" (m68k_fixup_memoffset)); + return vaddr; +} + +#else /* !CONFIG_SUN3 */ +/* This #define is a horrible hack to suppress lots of warnings. --m */ +#define __pa(x) ___pa((unsigned long)(x)) +static inline unsigned long ___pa(unsigned long x) +{ + if(x == 0) + return 0; + if(x >= PAGE_OFFSET) + return (x-PAGE_OFFSET); + else + return (x+0x2000000); +} + +static inline void *__va(unsigned long x) +{ + if(x == 0) + return (void *)0; + + if(x < 0x2000000) + return (void *)(x+PAGE_OFFSET); + else + return (void *)(x-0x2000000); +} +#endif /* CONFIG_SUN3 */ + +/* + * NOTE: virtual isn't really correct, actually it should be the offset into the + * memory node, but we have no highmem, so that works for now. + * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots + * of the shifts unnecessary. + */ +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) + +extern int m68k_virt_to_node_shift; + +#ifdef CONFIG_SINGLE_MEMORY_CHUNK +#define __virt_to_node(addr) (&pg_data_map[0]) +#else +extern struct pglist_data *pg_data_table[]; + +static inline __attribute_const__ int __virt_to_node_shift(void) +{ + int shift; + + asm ( + "1: moveq #0,%0\n" + m68k_fixup(%c1, 1b) + : "=d" (shift) + : "i" (m68k_fixup_vnode_shift)); + return shift; +} + +#define __virt_to_node(addr) (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()]) +#endif + +#define virt_to_page(addr) ({ \ + pfn_to_page(virt_to_pfn(addr)); \ +}) +#define page_to_virt(page) ({ \ + pfn_to_virt(page_to_pfn(page)); \ +}) + +#define pfn_to_page(pfn) ({ \ + unsigned long __pfn = (pfn); \ + struct pglist_data *pgdat; \ + pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn)); \ + pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \ +}) +#define page_to_pfn(_page) ({ \ + struct page *__p = (_page); \ + struct pglist_data *pgdat; \ + pgdat = &pg_data_map[page_to_nid(__p)]; \ + ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \ +}) + +#define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory) +#define pfn_valid(pfn) virt_addr_valid(pfn_to_virt(pfn)) + +#endif /* __ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include + +#endif /* _M68K_PAGE_H */ diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h new file mode 100644 index 0000000..3a1ede4 --- /dev/null +++ b/arch/m68k/include/asm/page_no.h @@ -0,0 +1,77 @@ +#ifndef _M68KNOMMU_PAGE_H +#define _M68KNOMMU_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT (12) +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) + +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) + +#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) +#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#endif /* __ASSEMBLY__ */ + +#include + +#endif /* _M68KNOMMU_PAGE_H */ diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h new file mode 100644 index 0000000..66455c8 --- /dev/null +++ b/arch/m68k/include/asm/page_offset.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "page_offset_no.h" +#else +#include "page_offset_mm.h" +#endif diff --git a/arch/m68k/include/asm/page_offset_mm.h b/arch/m68k/include/asm/page_offset_mm.h new file mode 100644 index 0000000..1cbdb7f --- /dev/null +++ b/arch/m68k/include/asm/page_offset_mm.h @@ -0,0 +1,8 @@ + +/* This handles the memory map.. */ +#ifndef CONFIG_SUN3 +#define PAGE_OFFSET_RAW 0x00000000 +#else +#define PAGE_OFFSET_RAW 0x0E000000 +#endif + diff --git a/arch/m68k/include/asm/page_offset_no.h b/arch/m68k/include/asm/page_offset_no.h new file mode 100644 index 0000000..d4e73e0 --- /dev/null +++ b/arch/m68k/include/asm/page_offset_no.h @@ -0,0 +1,5 @@ + + +/* This handles the memory map.. */ +#define PAGE_OFFSET_RAW CONFIG_RAMBASE + diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h new file mode 100644 index 0000000..40d1112 --- /dev/null +++ b/arch/m68k/include/asm/param.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "param_no.h" +#else +#include "param_mm.h" +#endif diff --git a/arch/m68k/include/asm/param_mm.h b/arch/m68k/include/asm/param_mm.h new file mode 100644 index 0000000..536a278 --- /dev/null +++ b/arch/m68k/include/asm/param_mm.h @@ -0,0 +1,22 @@ +#ifndef _M68K_PARAM_H +#define _M68K_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 8192 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/asm/param_no.h b/arch/m68k/include/asm/param_no.h new file mode 100644 index 0000000..6044397 --- /dev/null +++ b/arch/m68k/include/asm/param_no.h @@ -0,0 +1,22 @@ +#ifndef _M68KNOMMU_PARAM_H +#define _M68KNOMMU_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ HZ +#define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _M68KNOMMU_PARAM_H */ diff --git a/arch/m68k/include/asm/parport.h b/arch/m68k/include/asm/parport.h new file mode 100644 index 0000000..646b187 --- /dev/null +++ b/arch/m68k/include/asm/parport.h @@ -0,0 +1,26 @@ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + * + * RZ: for use with Q40 and other ISA machines + */ + +#ifndef _ASM_M68K_PARPORT_H +#define _ASM_M68K_PARPORT_H 1 + +#define insl(port,buf,len) isa_insb(port,buf,(len)<<2) +#define outsl(port,buf,len) isa_outsb(port,buf,(len)<<2) + +/* no dma, or IRQ autoprobing */ +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + if (! (MACH_IS_Q40)) + return 0; /* count=0 */ + return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE); +} + +#endif /* !(_ASM_M68K_PARPORT_H) */ diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h new file mode 100644 index 0000000..dbea953 --- /dev/null +++ b/arch/m68k/include/asm/pci.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pci_no.h" +#else +#include "pci_mm.h" +#endif diff --git a/arch/m68k/include/asm/pci_mm.h b/arch/m68k/include/asm/pci_mm.h new file mode 100644 index 0000000..4ad0aea --- /dev/null +++ b/arch/m68k/include/asm/pci_mm.h @@ -0,0 +1,12 @@ +#ifndef _ASM_M68K_PCI_H +#define _ASM_M68K_PCI_H + +#include + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* _ASM_M68K_PCI_H */ diff --git a/arch/m68k/include/asm/pci_no.h b/arch/m68k/include/asm/pci_no.h new file mode 100644 index 0000000..9abbc03 --- /dev/null +++ b/arch/m68k/include/asm/pci_no.h @@ -0,0 +1,29 @@ +#ifndef M68KNOMMU_PCI_H +#define M68KNOMMU_PCI_H + +#include + +#ifdef CONFIG_COMEMPCI +/* + * These are pretty much arbitary with the CoMEM implementation. + * We have the whole address space to ourselves. + */ +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x00010000 + +#define pcibios_scan_all_fns(a, b) 0 + +/* + * Return whether the given PCI device DMA address mask can + * be supported properly. For example, if your device can + * only drive the low 24-bits during PCI bus mastering, then + * you would pass 0x00ffffff as the mask to this function. + */ +static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) +{ + return 1; +} + +#endif /* CONFIG_COMEMPCI */ + +#endif /* M68KNOMMU_PCI_H */ diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h new file mode 100644 index 0000000..0859d04 --- /dev/null +++ b/arch/m68k/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_M68K_PERCPU_H +#define __ASM_M68K_PERCPU_H + +#include + +#endif /* __ASM_M68K_PERCPU_H */ diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h new file mode 100644 index 0000000..059cb73 --- /dev/null +++ b/arch/m68k/include/asm/pgalloc.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pgalloc_no.h" +#else +#include "pgalloc_mm.h" +#endif diff --git a/arch/m68k/include/asm/pgalloc_mm.h b/arch/m68k/include/asm/pgalloc_mm.h new file mode 100644 index 0000000..4cb1a57 --- /dev/null +++ b/arch/m68k/include/asm/pgalloc_mm.h @@ -0,0 +1,19 @@ + +#ifndef M68K_PGALLOC_H +#define M68K_PGALLOC_H + +#include +#include +#include +#include + + +#ifdef CONFIG_SUN3 +#include +#else +#include +#endif + +extern void m68k_setup_node(int node); + +#endif /* M68K_PGALLOC_H */ diff --git a/arch/m68k/include/asm/pgalloc_no.h b/arch/m68k/include/asm/pgalloc_no.h new file mode 100644 index 0000000..d6352f6 --- /dev/null +++ b/arch/m68k/include/asm/pgalloc_no.h @@ -0,0 +1,8 @@ +#ifndef _M68KNOMMU_PGALLOC_H +#define _M68KNOMMU_PGALLOC_H + +#include + +#define check_pgt_cache() do { } while (0) + +#endif /* _M68KNOMMU_PGALLOC_H */ diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h new file mode 100644 index 0000000..ee6759e --- /dev/null +++ b/arch/m68k/include/asm/pgtable.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pgtable_no.h" +#else +#include "pgtable_mm.h" +#endif diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h new file mode 100644 index 0000000..0b604f0 --- /dev/null +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -0,0 +1,166 @@ +#ifndef _M68K_PGTABLE_H +#define _M68K_PGTABLE_H + +#include + +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include + +/* + * This file contains the functions and defines necessary to modify and use + * the m68k page table tree. + */ + +#include + +/* Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) \ + do{ \ + *(pteptr) = (pteval); \ + } while(0) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#ifdef CONFIG_SUN3 +#define PMD_SHIFT 17 +#else +#define PMD_SHIFT 22 +#endif +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#ifdef CONFIG_SUN3 +#define PGDIR_SHIFT 17 +#else +#define PGDIR_SHIFT 25 +#endif +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * entries per page directory level: the m68k is configured as three-level, + * so we do have PMD level physically. + */ +#ifdef CONFIG_SUN3 +#define PTRS_PER_PTE 16 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 +#else +#define PTRS_PER_PTE 1024 +#define PTRS_PER_PMD 8 +#define PTRS_PER_PGD 128 +#endif +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +/* Virtual address region for use by kernel_map() */ +#ifdef CONFIG_SUN3 +#define KMAP_START 0x0DC00000 +#define KMAP_END 0x0E000000 +#else +#define KMAP_START 0xd0000000 +#define KMAP_END 0xf0000000 +#endif + +#ifndef CONFIG_SUN3 +/* Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_END KMAP_START +#else +extern unsigned long vmalloc_end; +#define VMALLOC_START 0x0f800000 +#define VMALLOC_END vmalloc_end +#endif /* CONFIG_SUN3 */ + +/* zero page used for uninitialized stuff */ +extern void *empty_zero_page; + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +/* number of bits that fit into a memory pointer */ +#define BITS_PER_PTR (8*sizeof(unsigned long)) + +/* to align the pointer to a pointer address */ +#define PTR_MASK (~(sizeof(void*)-1)) + +/* sizeof(void*)==1< +#else +#include +#endif + +#ifndef __ASSEMBLY__ +#include + +/* + * Macro to mark a page protection value as "uncacheable". + */ +#ifdef SUN3_PAGE_NOCACHE +# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE +#else +# define __SUN3_PAGE_NOCACHE 0 +#endif +#define pgprot_noncached(prot) \ + (MMU_IS_SUN3 \ + ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \ + : ((MMU_IS_851 || MMU_IS_030) \ + ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030)) \ + : (MMU_IS_040 || MMU_IS_060) \ + ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ + : (prot))) + +#endif /* !__ASSEMBLY__ */ + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#define check_pgt_cache() do { } while (0) + +#endif /* _M68K_PGTABLE_H */ diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h new file mode 100644 index 0000000..4625101 --- /dev/null +++ b/arch/m68k/include/asm/pgtable_no.h @@ -0,0 +1,70 @@ +#ifndef _M68KNOMMU_PGTABLE_H +#define _M68KNOMMU_PGTABLE_H + +#include + +/* + * (C) Copyright 2000-2002, Greg Ungerer + */ + +#include +#include +#include +#include + +/* + * Trivial page table functions. + */ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) + +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) + +extern void paging_init(void); +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +/* + * These would be in other places but having them here reduces the diffs. + */ +extern unsigned int kobjsize(const void *objp); + +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#include + +#endif /* _M68KNOMMU_PGTABLE_H */ diff --git a/arch/m68k/include/asm/poll.h b/arch/m68k/include/asm/poll.h new file mode 100644 index 0000000..f080fcd --- /dev/null +++ b/arch/m68k/include/asm/poll.h @@ -0,0 +1,9 @@ +#ifndef __m68k_POLL_H +#define __m68k_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include + +#endif diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/asm/posix_types.h new file mode 100644 index 0000000..63cdcc1 --- /dev/null +++ b/arch/m68k/include/asm/posix_types.h @@ -0,0 +1,61 @@ +#ifndef __ARCH_M68K_POSIX_TYPES_H +#define __ARCH_M68K_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) */ + +#endif diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h new file mode 100644 index 0000000..fc3f2c2 --- /dev/null +++ b/arch/m68k/include/asm/processor.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "processor_no.h" +#else +#include "processor_mm.h" +#endif diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h new file mode 100644 index 0000000..1f61ef5 --- /dev/null +++ b/arch/m68k/include/asm/processor_mm.h @@ -0,0 +1,130 @@ +/* + * include/asm-m68k/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_M68K_PROCESSOR_H +#define __ASM_M68K_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include +#include + +static inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); + return usp; +} + +static inline void wrusp(unsigned long usp) +{ + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#ifndef CONFIG_SUN3 +#define TASK_SIZE (0xF0000000UL) +#else +#define TASK_SIZE (0x0E000000UL) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#ifndef CONFIG_SUN3 +#define TASK_UNMAPPED_BASE 0xC0000000UL +#else +#define TASK_UNMAPPED_BASE 0x0A000000UL +#endif +#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ + unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long faddr; /* info about last fault */ + int signo, code; + unsigned long fp[8*3]; + unsigned long fpcntl[3]; /* fp control regs */ + unsigned char fpstate[FPSTATESIZE]; /* floating point state */ + struct thread_info info; +}; + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ + .sr = PS_S, \ + .fs = __KERNEL_DS, \ + .info = INIT_THREAD_INFO(init_task), \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +static inline void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp) +{ + /* reads from user space */ + set_fs(USER_DS); + + regs->pc = pc; + regs->sr &= ~0x2000; + wrusp(usp); +} + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + (virt_addr_valid((tsk)->thread.esp0))) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +#endif diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h new file mode 100644 index 0000000..91cba18 --- /dev/null +++ b/arch/m68k/include/asm/processor_no.h @@ -0,0 +1,143 @@ +/* + * include/asm-m68knommu/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_M68K_PROCESSOR_H +#define __ASM_M68K_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include +#include +#include +#include +#include + +static inline unsigned long rdusp(void) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + return(sw_usp); +#else + unsigned long usp; + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); + return usp; +#endif +} + +static inline void wrusp(unsigned long usp) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + sw_usp = usp; +#else + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); +#endif +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE (0xF0000000UL) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +#define TASK_UNMAPPED_BASE 0 + +/* + * if you change this structure, you must change the code and offsets + * in m68k/machasm.S + */ + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ + unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long fp[8*3]; + unsigned long fpcntl[3]; /* fp control regs */ + unsigned char fpstate[FPSTATESIZE]; /* floating point state */ +}; + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, __KERNEL_DS, \ + {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ +} + +/* + * Coldfire stacks need to be re-aligned on trap exit, conventional + * 68k can handle this case cleanly. + */ +#if defined(CONFIG_COLDFIRE) +#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) +#else +#define reformat(_regs) do { } while (0) +#endif + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + ((struct switch_stack *)(_regs))[-1].a6 = 0; \ + reformat(_regs); \ + if (current->mm) \ + (_regs)->d5 = current->mm->start_data; \ + (_regs)->sr &= ~0x2000; \ + wrusp(_usp); \ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +unsigned long thread_saved_pc(struct task_struct *tsk); +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + (virt_addr_valid((tsk)->thread.esp0))) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +#endif diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h new file mode 100644 index 0000000..e83cd2f --- /dev/null +++ b/arch/m68k/include/asm/ptrace.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "ptrace_no.h" +#else +#include "ptrace_mm.h" +#endif diff --git a/arch/m68k/include/asm/ptrace_mm.h b/arch/m68k/include/asm/ptrace_mm.h new file mode 100644 index 0000000..57e763d --- /dev/null +++ b/arch/m68k/include/asm/ptrace_mm.h @@ -0,0 +1,80 @@ +#ifndef _M68K_PTRACE_H +#define _M68K_PTRACE_H + +#define PT_D1 0 +#define PT_D2 1 +#define PT_D3 2 +#define PT_D4 3 +#define PT_D5 4 +#define PT_D6 5 +#define PT_D7 6 +#define PT_A0 7 +#define PT_A1 8 +#define PT_A2 9 +#define PT_A3 10 +#define PT_A4 11 +#define PT_A5 12 +#define PT_A6 13 +#define PT_D0 14 +#define PT_USP 15 +#define PT_ORIG_D0 16 +#define PT_SR 17 +#define PT_PC 18 + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long d1; + long d2; + long d3; + long d4; + long d5; + long a0; + long a1; + long a2; + long d0; + long orig_d0; + long stkadj; + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long d6; + unsigned long d7; + unsigned long a3; + unsigned long a4; + unsigned long a5; + unsigned long a6; + unsigned long retpc; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +#ifdef __KERNEL__ + +#ifndef PS_S +#define PS_S (0x2000) +#define PS_M (0x1000) +#endif + +#define user_mode(regs) (!((regs)->sr & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _M68K_PTRACE_H */ diff --git a/arch/m68k/include/asm/ptrace_no.h b/arch/m68k/include/asm/ptrace_no.h new file mode 100644 index 0000000..8c9194b --- /dev/null +++ b/arch/m68k/include/asm/ptrace_no.h @@ -0,0 +1,87 @@ +#ifndef _M68K_PTRACE_H +#define _M68K_PTRACE_H + +#define PT_D1 0 +#define PT_D2 1 +#define PT_D3 2 +#define PT_D4 3 +#define PT_D5 4 +#define PT_D6 5 +#define PT_D7 6 +#define PT_A0 7 +#define PT_A1 8 +#define PT_A2 9 +#define PT_A3 10 +#define PT_A4 11 +#define PT_A5 12 +#define PT_A6 13 +#define PT_D0 14 +#define PT_USP 15 +#define PT_ORIG_D0 16 +#define PT_SR 17 +#define PT_PC 18 + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long d1; + long d2; + long d3; + long d4; + long d5; + long a0; + long a1; + long a2; + long d0; + long orig_d0; + long stkadj; +#ifdef CONFIG_COLDFIRE + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ + unsigned short sr; + unsigned long pc; +#else + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ +#endif +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long d6; + unsigned long d7; + unsigned long a3; + unsigned long a4; + unsigned long a5; + unsigned long a6; + unsigned long retpc; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +#ifdef __KERNEL__ + +#ifndef PS_S +#define PS_S (0x2000) +#define PS_M (0x1000) +#endif + +#define user_mode(regs) (!((regs)->sr & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _M68K_PTRACE_H */ diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h new file mode 100644 index 0000000..3907a09 --- /dev/null +++ b/arch/m68k/include/asm/q40_master.h @@ -0,0 +1,69 @@ +/* + * Q40 master Chip Control + * RTC stuff merged for compactnes.. +*/ + +#ifndef _Q40_MASTER_H +#define _Q40_MASTER_H + +#include + + +#define q40_master_addr 0xff000000 + +#define IIRQ_REG 0x0 /* internal IRQ reg */ +#define EIRQ_REG 0x4 /* external ... */ +#define KEYCODE_REG 0x1c /* value of received scancode */ +#define DISPLAY_CONTROL_REG 0x18 +#define FRAME_CLEAR_REG 0x24 +#define LED_REG 0x30 + +#define Q40_LED_ON() master_outb(1,LED_REG) +#define Q40_LED_OFF() master_outb(0,LED_REG) + +#define INTERRUPT_REG IIRQ_REG /* "native" ints */ +#define KEY_IRQ_ENABLE_REG 0x08 /**/ +#define KEYBOARD_UNLOCK_REG 0x20 /* clear kb int */ + +#define SAMPLE_ENABLE_REG 0x14 /* generate SAMPLE ints */ +#define SAMPLE_RATE_REG 0x2c +#define SAMPLE_CLEAR_REG 0x28 +#define SAMPLE_LOW 0x00 +#define SAMPLE_HIGH 0x01 + +#define FRAME_RATE_REG 0x38 /* generate FRAME ints at 200 HZ rate */ + +#if 0 +#define SER_ENABLE_REG 0x0c /* allow serial ints to be generated */ +#endif +#define EXT_ENABLE_REG 0x10 /* ... rest of the ISA ints ... */ + + +#define master_inb(_reg_) in_8((unsigned char *)q40_master_addr+_reg_) +#define master_outb(_b_,_reg_) out_8((unsigned char *)q40_master_addr+_reg_,_b_) + +/* RTC defines */ + +#define Q40_RTC_BASE (0xff021ffc) + +#define Q40_RTC_YEAR (*(volatile unsigned char *)(Q40_RTC_BASE+0)) +#define Q40_RTC_MNTH (*(volatile unsigned char *)(Q40_RTC_BASE-4)) +#define Q40_RTC_DATE (*(volatile unsigned char *)(Q40_RTC_BASE-8)) +#define Q40_RTC_DOW (*(volatile unsigned char *)(Q40_RTC_BASE-12)) +#define Q40_RTC_HOUR (*(volatile unsigned char *)(Q40_RTC_BASE-16)) +#define Q40_RTC_MINS (*(volatile unsigned char *)(Q40_RTC_BASE-20)) +#define Q40_RTC_SECS (*(volatile unsigned char *)(Q40_RTC_BASE-24)) +#define Q40_RTC_CTRL (*(volatile unsigned char *)(Q40_RTC_BASE-28)) + +/* some control bits */ +#define Q40_RTC_READ 64 /* prepare for reading */ +#define Q40_RTC_WRITE 128 + +/* define some Q40 specific ints */ +#include "q40ints.h" + +/* misc defs */ +#define DAC_LEFT ((unsigned char *)0xff008000) +#define DAC_RIGHT ((unsigned char *)0xff008004) + +#endif /* _Q40_MASTER_H */ diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h new file mode 100644 index 0000000..3d970af --- /dev/null +++ b/arch/m68k/include/asm/q40ints.h @@ -0,0 +1,29 @@ +/* + * contains some Q40 related interrupt definitions + */ + +#define Q40_IRQ_MAX (34) + +#define Q40_IRQ_SAMPLE (34) +#define Q40_IRQ_KEYBOARD (32) +#define Q40_IRQ_FRAME (33) + + +/* masks for interrupt regiosters*/ +/* internal, IIRQ_REG */ +#define Q40_IRQ_KEYB_MASK (2) +#define Q40_IRQ_SER_MASK (1<<2) +#define Q40_IRQ_FRAME_MASK (1<<3) +#define Q40_IRQ_EXT_MASK (1<<4) /* is a EIRQ */ +/* eirq, EIRQ_REG */ +#define Q40_IRQ3_MASK (1) +#define Q40_IRQ4_MASK (1<<1) +#define Q40_IRQ5_MASK (1<<2) +#define Q40_IRQ6_MASK (1<<3) +#define Q40_IRQ7_MASK (1<<4) +#define Q40_IRQ10_MASK (1<<5) +#define Q40_IRQ14_MASK (1<<6) +#define Q40_IRQ15_MASK (1<<7) + +extern unsigned long q40_probe_irq_on (void); +extern int q40_probe_irq_off (unsigned long irqs); diff --git a/arch/m68k/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h new file mode 100644 index 0000000..c363693 --- /dev/null +++ b/arch/m68k/include/asm/quicc_simple.h @@ -0,0 +1,52 @@ +/*********************************** + * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ + *********************************** + * + *************************************** + * Simple drivers common header + *************************************** + */ + +#ifndef __SIMPLE_H +#define __SIMPLE_H + +/* #include "quicc.h" */ + +#define GLB_SCC_0 0 +#define GLB_SCC_1 1 +#define GLB_SCC_2 2 +#define GLB_SCC_3 3 + +typedef void (int_routine)(unsigned short interrupt_event); +typedef int_routine *int_routine_ptr; +typedef void *(alloc_routine)(int length); +typedef void (free_routine)(int scc_num, int channel_num, void *buf); +typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); +typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); +typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); +typedef void (handle_lost_error_routine)(int scc_num, int channel_num); + +/* user defined functions for global errors */ +typedef void (handle_glob_overrun_routine)(int scc_number); +typedef void (handle_glob_underrun_routine)(int scc_number); +typedef void (glob_intr_q_overflow_routine)(int scc_number); + +/* + * General initialization and command routines + */ +void quicc_issue_cmd (unsigned short cmd, int scc_num); +void quicc_init(void); +void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); +void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); +void quicc_scc_start(int scc_num); +void quicc_scc_loopback(int scc_num); + +/* Interrupt enable/disable routines for critical pieces of code*/ +unsigned short IntrDis(void); +void IntrEna(unsigned short old_sr); + +/* For debugging */ +void print_rbd(int scc_num); +void print_tbd(int scc_num); + +#endif diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h new file mode 100644 index 0000000..d9eb983 --- /dev/null +++ b/arch/m68k/include/asm/raw_io.h @@ -0,0 +1,347 @@ +/* + * linux/include/asm-m68k/raw_io.h + * + * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace + * + */ + +#ifndef _RAW_IO_H +#define _RAW_IO_H + +#ifdef __KERNEL__ + +#include + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void iounmap(void __iomem *addr); + +extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + + +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesirable for some devices. + */ +#define in_8(addr) \ + ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; }) +#define in_be16(addr) \ + ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; }) +#define in_be32(addr) \ + ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; }) +#define in_le16(addr) \ + ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; }) +#define in_le32(addr) \ + ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; }) + +#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b)) +#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w)) +#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l)) +#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) +#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) + +#define raw_inb in_8 +#define raw_inw in_be16 +#define raw_inl in_be32 +#define __raw_readb in_8 +#define __raw_readw in_be16 +#define __raw_readl in_be32 + +#define raw_outb(val,port) out_8((port),(val)) +#define raw_outw(val,port) out_be16((port),(val)) +#define raw_outl(val,port) out_be32((port),(val)) +#define __raw_writeb(val,addr) out_8((addr),(val)) +#define __raw_writew(val,addr) out_be16((addr),(val)) +#define __raw_writel(val,addr) out_be32((addr),(val)) + +static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) +{ + unsigned int i; + + for (i = 0; i < len; i++) + *buf++ = in_8(port); +} + +static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf, + unsigned int len) +{ + unsigned int i; + + for (i = 0; i < len; i++) + out_8(port, *buf++); +} + +static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr) +{ + unsigned int tmp; + + if (nr & 15) { + tmp = (nr & 15) - 1; + asm volatile ( + "1: movew %2@,%0@+; dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } + if (nr >> 4) { + tmp = (nr >> 4) - 1; + asm volatile ( + "1: " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "movew %2@,%0@+; " + "dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } +} + +static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf, + unsigned int nr) +{ + unsigned int tmp; + + if (nr & 15) { + tmp = (nr & 15) - 1; + asm volatile ( + "1: movew %0@+,%2@; dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } + if (nr >> 4) { + tmp = (nr >> 4) - 1; + asm volatile ( + "1: " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "movew %0@+,%2@; " + "dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } +} + +static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr) +{ + unsigned int tmp; + + if (nr & 15) { + tmp = (nr & 15) - 1; + asm volatile ( + "1: movel %2@,%0@+; dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } + if (nr >> 4) { + tmp = (nr >> 4) - 1; + asm volatile ( + "1: " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "movel %2@,%0@+; " + "dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } +} + +static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf, + unsigned int nr) +{ + unsigned int tmp; + + if (nr & 15) { + tmp = (nr & 15) - 1; + asm volatile ( + "1: movel %0@+,%2@; dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } + if (nr >> 4) { + tmp = (nr >> 4) - 1; + asm volatile ( + "1: " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "movel %0@+,%2@; " + "dbra %1,1b" + : "=a" (buf), "=d" (tmp) + : "a" (port), "0" (buf), + "1" (tmp)); + } +} + + +static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf, + unsigned int nr) +{ + if ((nr) % 8) + __asm__ __volatile__ + ("\tmovel %0,%/a0\n\t" + "movel %1,%/a1\n\t" + "movel %2,%/d6\n\t" + "subql #1,%/d6\n" + "1:\tmovew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "dbra %/d6,1b" + : + : "g" (port), "g" (buf), "g" (nr) + : "d0", "a0", "a1", "d6"); + else + __asm__ __volatile__ + ("movel %0,%/a0\n\t" + "movel %1,%/a1\n\t" + "movel %2,%/d6\n\t" + "lsrl #3,%/d6\n\t" + "subql #1,%/d6\n" + "1:\tmovew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "movew %/a0@,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a1@+\n\t" + "dbra %/d6,1b" + : + : "g" (port), "g" (buf), "g" (nr) + : "d0", "a0", "a1", "d6"); +} + +static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, + unsigned int nr) +{ + if ((nr) % 8) + __asm__ __volatile__ + ("movel %0,%/a0\n\t" + "movel %1,%/a1\n\t" + "movel %2,%/d6\n\t" + "subql #1,%/d6\n" + "1:\tmovew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "dbra %/d6,1b" + : + : "g" (port), "g" (buf), "g" (nr) + : "d0", "a0", "a1", "d6"); + else + __asm__ __volatile__ + ("movel %0,%/a0\n\t" + "movel %1,%/a1\n\t" + "movel %2,%/d6\n\t" + "lsrl #3,%/d6\n\t" + "subql #1,%/d6\n" + "1:\tmovew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "movew %/a1@+,%/d0\n\t" + "rolw #8,%/d0\n\t" + "movew %/d0,%/a0@\n\t" + "dbra %/d6,1b" + : + : "g" (port), "g" (buf), "g" (nr) + : "d0", "a0", "a1", "d6"); +} + +#endif /* __KERNEL__ */ + +#endif /* _RAW_IO_H */ diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h new file mode 100644 index 0000000..e7d3501 --- /dev/null +++ b/arch/m68k/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef _M68K_RESOURCE_H +#define _M68K_RESOURCE_H + +#include + +#endif /* _M68K_RESOURCE_H */ diff --git a/arch/m68k/include/asm/rtc.h b/arch/m68k/include/asm/rtc.h new file mode 100644 index 0000000..5d3e038 --- /dev/null +++ b/arch/m68k/include/asm/rtc.h @@ -0,0 +1,76 @@ +/* include/asm-m68k/rtc.h + * + * Copyright Richard Zidlicky + * implementation details for genrtc/q40rtc driver + */ +/* permission is hereby granted to copy, modify and redistribute this code + * in terms of the GNU Library General Public License, Version 2 or later, + * at your option. + */ + +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +#ifdef __KERNEL__ + +#include +#include +#include + +#define RTC_PIE 0x40 /* periodic interrupt enable */ +#define RTC_AIE 0x20 /* alarm interrupt enable */ +#define RTC_UIE 0x10 /* update-finished interrupt enable */ + +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +static inline unsigned int get_rtc_time(struct rtc_time *time) +{ + /* + * Only the values that we read from the RTC are set. We leave + * tm_wday, tm_yday and tm_isdst untouched. Even though the + * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated + * by the RTC when initially set to a non-zero value. + */ + mach_hwclk(0, time); + return RTC_24H; +} + +static inline int set_rtc_time(struct rtc_time *time) +{ + return mach_hwclk(1, time); +} + +static inline unsigned int get_rtc_ss(void) +{ + if (mach_get_ss) + return mach_get_ss(); + else{ + struct rtc_time h; + + get_rtc_time(&h); + return h.tm_sec; + } +} + +static inline int get_rtc_pll(struct rtc_pll_info *pll) +{ + if (mach_get_rtc_pll) + return mach_get_rtc_pll(pll); + else + return -EINVAL; +} +static inline int set_rtc_pll(struct rtc_pll_info *pll) +{ + if (mach_set_rtc_pll) + return mach_set_rtc_pll(pll); + else + return -EINVAL; +} +#endif /* __KERNEL__ */ + +#endif /* _ASM__RTC_H */ diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h new file mode 100644 index 0000000..bfe3ba1 --- /dev/null +++ b/arch/m68k/include/asm/sbus.h @@ -0,0 +1,45 @@ +/* + * some sbus structures and macros to make usage of sbus drivers possible + */ + +#ifndef __M68K_SBUS_H +#define __M68K_SBUS_H + +struct sbus_dev { + struct { + unsigned int which_io; + unsigned int phys_addr; + } reg_addrs[1]; +}; + +/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ +/* No SBUS on the Sun3, kludge -- sam */ + +static inline void _sbus_writeb(unsigned char val, unsigned long addr) +{ + *(volatile unsigned char *)addr = val; +} + +static inline unsigned char _sbus_readb(unsigned long addr) +{ + return *(volatile unsigned char *)addr; +} + +static inline void _sbus_writel(unsigned long val, unsigned long addr) +{ + *(volatile unsigned long *)addr = val; + +} + +extern inline unsigned long _sbus_readl(unsigned long addr) +{ + return *(volatile unsigned long *)addr; +} + + +#define sbus_readb(a) _sbus_readb((unsigned long)a) +#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) +#define sbus_readl(a) _sbus_readl((unsigned long)a) +#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) + +#endif diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h new file mode 100644 index 0000000..b7e5286 --- /dev/null +++ b/arch/m68k/include/asm/scatterlist.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "scatterlist_no.h" +#else +#include "scatterlist_mm.h" +#endif diff --git a/arch/m68k/include/asm/scatterlist_mm.h b/arch/m68k/include/asm/scatterlist_mm.h new file mode 100644 index 0000000..d3a7a0e --- /dev/null +++ b/arch/m68k/include/asm/scatterlist_mm.h @@ -0,0 +1,23 @@ +#ifndef _M68K_SCATTERLIST_H +#define _M68K_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; + + __u32 dma_address; /* A place to hang host-specific addresses at. */ +}; + +/* This is bogus and should go away. */ +#define ISA_DMA_THRESHOLD (0x00ffffff) + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/scatterlist_no.h b/arch/m68k/include/asm/scatterlist_no.h new file mode 100644 index 0000000..afc4788 --- /dev/null +++ b/arch/m68k/include/asm/scatterlist_no.h @@ -0,0 +1,22 @@ +#ifndef _M68KNOMMU_SCATTERLIST_H +#define _M68KNOMMU_SCATTERLIST_H + +#include +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* !(_M68KNOMMU_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h new file mode 100644 index 0000000..d64967e --- /dev/null +++ b/arch/m68k/include/asm/sections.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M68K_SECTIONS_H +#define _ASM_M68K_SECTIONS_H + +#include + +#endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h new file mode 100644 index 0000000..82583bc --- /dev/null +++ b/arch/m68k/include/asm/segment.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "segment_no.h" +#else +#include "segment_mm.h" +#endif diff --git a/arch/m68k/include/asm/segment_mm.h b/arch/m68k/include/asm/segment_mm.h new file mode 100644 index 0000000..7b0b2d3 --- /dev/null +++ b/arch/m68k/include/asm/segment_mm.h @@ -0,0 +1,57 @@ +#ifndef _M68K_SEGMENT_H +#define _M68K_SEGMENT_H + +/* define constants */ +/* Address spaces (FC0-FC2) */ +#define USER_DATA (1) +#ifndef __USER_DS +#define __USER_DS (USER_DATA) +#endif +#define USER_PROGRAM (2) +#define SUPER_DATA (5) +#ifndef __KERNEL_DS +#define __KERNEL_DS (SUPER_DATA) +#endif +#define SUPER_PROGRAM (6) +#define CPU_SPACE (7) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) + +/* + * Get/set the SFC/DFC registers for MOVES instructions + */ + +static inline mm_segment_t get_fs(void) +{ + mm_segment_t _v; + __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); + + return _v; +} + +static inline mm_segment_t get_ds(void) +{ + /* return the supervisor data space code */ + return KERNEL_DS; +} + +static inline void set_fs(mm_segment_t val) +{ + __asm__ __volatile__ ("movec %0,%/sfc\n\t" + "movec %0,%/dfc\n\t" + : /* no outputs */ : "r" (val.seg) : "memory"); +} + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68k/include/asm/segment_no.h b/arch/m68k/include/asm/segment_no.h new file mode 100644 index 0000000..42318eb --- /dev/null +++ b/arch/m68k/include/asm/segment_no.h @@ -0,0 +1,51 @@ +#ifndef _M68K_SEGMENT_H +#define _M68K_SEGMENT_H + +/* define constants */ +/* Address spaces (FC0-FC2) */ +#define USER_DATA (1) +#ifndef __USER_DS +#define __USER_DS (USER_DATA) +#endif +#define USER_PROGRAM (2) +#define SUPER_DATA (5) +#ifndef __KERNEL_DS +#define __KERNEL_DS (SUPER_DATA) +#endif +#define SUPER_PROGRAM (6) +#define CPU_SPACE (7) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) + +/* + * Get/set the SFC/DFC registers for MOVES instructions + */ + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline mm_segment_t get_ds(void) +{ + /* return the supervisor data space code */ + return KERNEL_DS; +} + +static inline void set_fs(mm_segment_t val) +{ +} + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68k/include/asm/sembuf.h b/arch/m68k/include/asm/sembuf.h new file mode 100644 index 0000000..2308052 --- /dev/null +++ b/arch/m68k/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _M68K_SEMBUF_H +#define _M68K_SEMBUF_H + +/* + * The semid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _M68K_SEMBUF_H */ diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h new file mode 100644 index 0000000..2b90d6e --- /dev/null +++ b/arch/m68k/include/asm/serial.h @@ -0,0 +1,33 @@ +/* + * include/asm-m68k/serial.h + * + * currently this seems useful only for a Q40, + * it's an almost exact copy of ../asm-alpha/serial.h + * + */ + + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h new file mode 100644 index 0000000..842f86f --- /dev/null +++ b/arch/m68k/include/asm/setup.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "setup_no.h" +#else +#include "setup_mm.h" +#endif diff --git a/arch/m68k/include/asm/setup_mm.h b/arch/m68k/include/asm/setup_mm.h new file mode 100644 index 0000000..4dfb395 --- /dev/null +++ b/arch/m68k/include/asm/setup_mm.h @@ -0,0 +1,376 @@ +/* +** asm/setup.h -- Definition of the Linux/m68k setup information +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created 09/29/92 by Greg Harp +** +** 5/2/94 Roman Hodek: +** Added bi_atari part of the machine dependent union bi_un; for now it +** contains just a model field to distinguish between TT and Falcon. +** 26/7/96 Roman Zippel: +** Renamed to setup.h; added some useful macros to allow gcc some +** optimizations if possible. +** 5/10/96 Geert Uytterhoeven: +** Redesign of the boot information structure; moved boot information +** structure to bootinfo.h +*/ + +#ifndef _M68K_SETUP_H +#define _M68K_SETUP_H + + + + /* + * Linux/m68k Architectures + */ + +#define MACH_AMIGA 1 +#define MACH_ATARI 2 +#define MACH_MAC 3 +#define MACH_APOLLO 4 +#define MACH_SUN3 5 +#define MACH_MVME147 6 +#define MACH_MVME16x 7 +#define MACH_BVME6000 8 +#define MACH_HP300 9 +#define MACH_Q40 10 +#define MACH_SUN3X 11 + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ + +#define CL_SIZE COMMAND_LINE_SIZE + +#ifndef __ASSEMBLY__ +extern unsigned long m68k_machtype; +#endif /* !__ASSEMBLY__ */ + +#if !defined(CONFIG_AMIGA) +# define MACH_IS_AMIGA (0) +#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ + || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA) +#else +# define MACH_AMIGA_ONLY +# define MACH_IS_AMIGA (1) +# define MACH_TYPE (MACH_AMIGA) +#endif + +#if !defined(CONFIG_ATARI) +# define MACH_IS_ATARI (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ + || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI) +#else +# define MACH_ATARI_ONLY +# define MACH_IS_ATARI (1) +# define MACH_TYPE (MACH_ATARI) +#endif + +#if !defined(CONFIG_MAC) +# define MACH_IS_MAC (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \ + || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_MAC (m68k_machtype == MACH_MAC) +#else +# define MACH_MAC_ONLY +# define MACH_IS_MAC (1) +# define MACH_TYPE (MACH_MAC) +#endif + +#if defined(CONFIG_SUN3) +#define MACH_IS_SUN3 (1) +#define MACH_SUN3_ONLY (1) +#define MACH_TYPE (MACH_SUN3) +#else +#define MACH_IS_SUN3 (0) +#endif + +#if !defined (CONFIG_APOLLO) +# define MACH_IS_APOLLO (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO) +#else +# define MACH_APOLLO_ONLY +# define MACH_IS_APOLLO (1) +# define MACH_TYPE (MACH_APOLLO) +#endif + +#if !defined (CONFIG_MVME147) +# define MACH_IS_MVME147 (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) +# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147) +#else +# define MACH_MVME147_ONLY +# define MACH_IS_MVME147 (1) +# define MACH_TYPE (MACH_MVME147) +#endif + +#if !defined (CONFIG_MVME16x) +# define MACH_IS_MVME16x (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x) +#else +# define MACH_MVME16x_ONLY +# define MACH_IS_MVME16x (1) +# define MACH_TYPE (MACH_MVME16x) +#endif + +#if !defined (CONFIG_BVME6000) +# define MACH_IS_BVME6000 (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000) +#else +# define MACH_BVME6000_ONLY +# define MACH_IS_BVME6000 (1) +# define MACH_TYPE (MACH_BVME6000) +#endif + +#if !defined (CONFIG_HP300) +# define MACH_IS_HP300 (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_HP300 (m68k_machtype == MACH_HP300) +#else +# define MACH_HP300_ONLY +# define MACH_IS_HP300 (1) +# define MACH_TYPE (MACH_HP300) +#endif + +#if !defined (CONFIG_Q40) +# define MACH_IS_Q40 (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) +# define MACH_IS_Q40 (m68k_machtype == MACH_Q40) +#else +# define MACH_Q40_ONLY +# define MACH_IS_Q40 (1) +# define MACH_TYPE (MACH_Q40) +#endif + +#if !defined (CONFIG_SUN3X) +# define MACH_IS_SUN3X (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ + || defined(CONFIG_Q40) || defined(CONFIG_MVME147) +# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X) +#else +# define CONFIG_SUN3X_ONLY +# define MACH_IS_SUN3X (1) +# define MACH_TYPE (MACH_SUN3X) +#endif + +#ifndef MACH_TYPE +# define MACH_TYPE (m68k_machtype) +#endif + +#endif /* __KERNEL__ */ + + + /* + * CPU, FPU and MMU types + * + * Note: we may rely on the following equalities: + * + * CPU_68020 == MMU_68851 + * CPU_68030 == MMU_68030 + * CPU_68040 == FPU_68040 == MMU_68040 + * CPU_68060 == FPU_68060 == MMU_68060 + */ + +#define CPUB_68020 0 +#define CPUB_68030 1 +#define CPUB_68040 2 +#define CPUB_68060 3 + +#define CPU_68020 (1< + +/* We have a bigger command line buffer. */ +#undef COMMAND_LINE_SIZE + +#endif /* __KERNEL__ */ + +#define COMMAND_LINE_SIZE 512 diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h new file mode 100644 index 0000000..fa56ec8 --- /dev/null +++ b/arch/m68k/include/asm/shm.h @@ -0,0 +1,31 @@ +#ifndef _M68K_SHM_H +#define _M68K_SHM_H + + +/* format of page table entries that correspond to shared memory pages + currently out in swap space (see also mm/swap.c): + bits 0-1 (PAGE_PRESENT) is = 0 + bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE + bits 31..9 are used like this: + bits 15..9 (SHM_ID) the id of the shared memory segment + bits 30..16 (SHM_IDX) the index of the page within the shared memory segment + (actually only bits 25..16 get used since SHMMAX is so low) + bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach +*/ +/* on the m68k both bits 0 and 1 must be zero */ +/* format on the sun3 is similar, but bits 30, 31 are set to zero and all + others are reduced by 2. --m */ + +#ifndef CONFIG_SUN3 +#define SHM_ID_SHIFT 9 +#else +#define SHM_ID_SHIFT 7 +#endif +#define _SHM_ID_BITS 7 +#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) + +#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) +#define _SHM_IDX_BITS 15 +#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) + +#endif /* _M68K_SHM_H */ diff --git a/arch/m68k/include/asm/shmbuf.h b/arch/m68k/include/asm/shmbuf.h new file mode 100644 index 0000000..f8928d6 --- /dev/null +++ b/arch/m68k/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _M68K_SHMBUF_H +#define _M68K_SHMBUF_H + +/* + * The shmid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _M68K_SHMBUF_H */ diff --git a/arch/m68k/include/asm/shmparam.h b/arch/m68k/include/asm/shmparam.h new file mode 100644 index 0000000..558892a --- /dev/null +++ b/arch/m68k/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _M68K_SHMPARAM_H +#define _M68K_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _M68K_SHMPARAM_H */ diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h new file mode 100644 index 0000000..bff6d40 --- /dev/null +++ b/arch/m68k/include/asm/sigcontext.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "sigcontext_no.h" +#else +#include "sigcontext_mm.h" +#endif diff --git a/arch/m68k/include/asm/sigcontext_mm.h b/arch/m68k/include/asm/sigcontext_mm.h new file mode 100644 index 0000000..64fbe34 --- /dev/null +++ b/arch/m68k/include/asm/sigcontext_mm.h @@ -0,0 +1,19 @@ +#ifndef _ASM_M68k_SIGCONTEXT_H +#define _ASM_M68k_SIGCONTEXT_H + +struct sigcontext { + unsigned long sc_mask; /* old sigmask */ + unsigned long sc_usp; /* old user stack pointer */ + unsigned long sc_d0; + unsigned long sc_d1; + unsigned long sc_a0; + unsigned long sc_a1; + unsigned short sc_sr; + unsigned long sc_pc; + unsigned short sc_formatvec; + unsigned long sc_fpregs[2*3]; /* room for two fp registers */ + unsigned long sc_fpcntl[3]; + unsigned char sc_fpstate[216]; +}; + +#endif diff --git a/arch/m68k/include/asm/sigcontext_no.h b/arch/m68k/include/asm/sigcontext_no.h new file mode 100644 index 0000000..36c293f --- /dev/null +++ b/arch/m68k/include/asm/sigcontext_no.h @@ -0,0 +1,17 @@ +#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H +#define _ASM_M68KNOMMU_SIGCONTEXT_H + +struct sigcontext { + unsigned long sc_mask; /* old sigmask */ + unsigned long sc_usp; /* old user stack pointer */ + unsigned long sc_d0; + unsigned long sc_d1; + unsigned long sc_a0; + unsigned long sc_a1; + unsigned long sc_a5; + unsigned short sc_sr; + unsigned long sc_pc; + unsigned short sc_formatvec; +}; + +#endif diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h new file mode 100644 index 0000000..61219d7 --- /dev/null +++ b/arch/m68k/include/asm/siginfo.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "siginfo_no.h" +#else +#include "siginfo_mm.h" +#endif diff --git a/arch/m68k/include/asm/siginfo_mm.h b/arch/m68k/include/asm/siginfo_mm.h new file mode 100644 index 0000000..05a8d6d --- /dev/null +++ b/arch/m68k/include/asm/siginfo_mm.h @@ -0,0 +1,92 @@ +#ifndef _M68K_SIGINFO_H +#define _M68K_SIGINFO_H + +#define HAVE_ARCH_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO + +#include + +typedef struct siginfo { + int si_signo; + int si_errno; + int si_code; + + union { + int _pad[SI_PAD_SIZE]; + + /* kill() */ + struct { + __kernel_pid_t _pid; /* sender's pid */ + __kernel_uid_t _uid; /* backwards compatibility */ + __kernel_uid32_t _uid32; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; + sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + __kernel_pid_t _pid; /* sender's pid */ + __kernel_uid_t _uid; /* backwards compatibility */ + sigval_t _sigval; + __kernel_uid32_t _uid32; /* sender's uid */ + } _rt; + + /* SIGCHLD */ + struct { + __kernel_pid_t _pid; /* which child */ + __kernel_uid_t _uid; /* backwards compatibility */ + int _status; /* exit code */ + clock_t _utime; + clock_t _stime; + __kernel_uid32_t _uid32; /* sender's uid */ + } _sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + void *_addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} siginfo_t; + +#define UID16_SIGINFO_COMPAT_NEEDED + +/* + * How these fields are to be accessed. + */ +#undef si_uid +#ifdef __KERNEL__ +#define si_uid _sifields._kill._uid32 +#define si_uid16 _sifields._kill._uid +#else +#define si_uid _sifields._kill._uid +#endif + +#ifdef __KERNEL__ + +#include + +static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) +{ + if (from->si_code < 0) + memcpy(to, from, sizeof(*to)); + else + /* _sigchld is currently the largest know union member */ + memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); +} + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/m68k/include/asm/siginfo_no.h b/arch/m68k/include/asm/siginfo_no.h new file mode 100644 index 0000000..b18e5f4 --- /dev/null +++ b/arch/m68k/include/asm/siginfo_no.h @@ -0,0 +1,6 @@ +#ifndef _M68KNOMMU_SIGINFO_H +#define _M68KNOMMU_SIGINFO_H + +#include + +#endif diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h new file mode 100644 index 0000000..3c19988 --- /dev/null +++ b/arch/m68k/include/asm/signal.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "signal_no.h" +#else +#include "signal_mm.h" +#endif diff --git a/arch/m68k/include/asm/signal_mm.h b/arch/m68k/include/asm/signal_mm.h new file mode 100644 index 0000000..3db8a81 --- /dev/null +++ b/arch/m68k/include/asm/signal_mm.h @@ -0,0 +1,206 @@ +#ifndef _M68K_SIGNAL_H +#define _M68K_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#define __HAVE_ARCH_SIG_BITOPS + +static inline void sigaddset(sigset_t *set, int _sig) +{ + asm ("bfset %0{%1,#1}" + : "+od" (*set) + : "id" ((_sig - 1) ^ 31) + : "cc"); +} + +static inline void sigdelset(sigset_t *set, int _sig) +{ + asm ("bfclr %0{%1,#1}" + : "+od" (*set) + : "id" ((_sig - 1) ^ 31) + : "cc"); +} + +static inline int __const_sigismember(sigset_t *set, int _sig) +{ + unsigned long sig = _sig - 1; + return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW)); +} + +static inline int __gen_sigismember(sigset_t *set, int _sig) +{ + int ret; + asm ("bfextu %1{%2,#1},%0" + : "=d" (ret) + : "od" (*set), "id" ((_sig-1) ^ 31) + : "cc"); + return ret; +} + +#define sigismember(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigismember(set,sig) : \ + __gen_sigismember(set,sig)) + +static inline int sigfindinword(unsigned long word) +{ + asm ("bfffo %1{#0,#0},%0" + : "=d" (word) + : "d" (word & -word) + : "cc"); + return word ^ 31; +} + +struct pt_regs; +extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); + +#endif /* __KERNEL__ */ + +#endif /* _M68K_SIGNAL_H */ diff --git a/arch/m68k/include/asm/signal_no.h b/arch/m68k/include/asm/signal_no.h new file mode 100644 index 0000000..216c08b --- /dev/null +++ b/arch/m68k/include/asm/signal_no.h @@ -0,0 +1,159 @@ +#ifndef _M68KNOMMU_SIGNAL_H +#define _M68KNOMMU_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _M68KNOMMU_SIGNAL_H */ diff --git a/arch/m68k/include/asm/smp.h b/arch/m68k/include/asm/smp.h new file mode 100644 index 0000000..9e9bd7e --- /dev/null +++ b/arch/m68k/include/asm/smp.h @@ -0,0 +1 @@ +/* nothing required here yet */ diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h new file mode 100644 index 0000000..dbc64e9 --- /dev/null +++ b/arch/m68k/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/sockios.h b/arch/m68k/include/asm/sockios.h new file mode 100644 index 0000000..c04a239 --- /dev/null +++ b/arch/m68k/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_M68K_SOCKIOS__ +#define __ARCH_M68K_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/arch/m68k/include/asm/spinlock.h b/arch/m68k/include/asm/spinlock.h new file mode 100644 index 0000000..20f46e2 --- /dev/null +++ b/arch/m68k/include/asm/spinlock.h @@ -0,0 +1,6 @@ +#ifndef __M68K_SPINLOCK_H +#define __M68K_SPINLOCK_H + +#error "m68k doesn't do SMP yet" + +#endif diff --git a/arch/m68k/include/asm/stat.h b/arch/m68k/include/asm/stat.h new file mode 100644 index 0000000..dd38bc2 --- /dev/null +++ b/arch/m68k/include/asm/stat.h @@ -0,0 +1,77 @@ +#ifndef _M68K_STAT_H +#define _M68K_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[2]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[2]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _M68K_STAT_H */ diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h new file mode 100644 index 0000000..08d93f1 --- /dev/null +++ b/arch/m68k/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef _M68K_STATFS_H +#define _M68K_STATFS_H + +#include + +#endif /* _M68K_STATFS_H */ diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h new file mode 100644 index 0000000..2c356f9 --- /dev/null +++ b/arch/m68k/include/asm/string.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "string_no.h" +#else +#include "string_mm.h" +#endif diff --git a/arch/m68k/include/asm/string_mm.h b/arch/m68k/include/asm/string_mm.h new file mode 100644 index 0000000..2eb7df1 --- /dev/null +++ b/arch/m68k/include/asm/string_mm.h @@ -0,0 +1,131 @@ +#ifndef _M68K_STRING_H_ +#define _M68K_STRING_H_ + +#include +#include + +static inline size_t __kernel_strlen(const char *s) +{ + const char *sc; + + for (sc = s; *sc++; ) + ; + return sc - s - 1; +} + +static inline char *__kernel_strcpy(char *dest, const char *src) +{ + char *xdest = dest; + + asm volatile ("\n" + "1: move.b (%1)+,(%0)+\n" + " jne 1b" + : "+a" (dest), "+a" (src) + : : "memory"); + return xdest; +} + +#ifndef __IN_STRING_C + +#define __HAVE_ARCH_STRLEN +#define strlen(s) (__builtin_constant_p(s) ? \ + __builtin_strlen(s) : \ + __kernel_strlen(s)) + +#define __HAVE_ARCH_STRNLEN +static inline size_t strnlen(const char *s, size_t count) +{ + const char *sc = s; + + asm volatile ("\n" + "1: subq.l #1,%1\n" + " jcs 2f\n" + " tst.b (%0)+\n" + " jne 1b\n" + " subq.l #1,%0\n" + "2:" + : "+a" (sc), "+d" (count)); + return sc - s; +} + +#define __HAVE_ARCH_STRCPY +#if __GNUC__ >= 4 +#define strcpy(d, s) (__builtin_constant_p(s) && \ + __builtin_strlen(s) <= 32 ? \ + __builtin_strcpy(d, s) : \ + __kernel_strcpy(d, s)) +#else +#define strcpy(d, s) __kernel_strcpy(d, s) +#endif + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + + asm volatile ("\n" + " jra 2f\n" + "1: move.b (%1),(%0)+\n" + " jeq 2f\n" + " addq.l #1,%1\n" + "2: subq.l #1,%2\n" + " jcc 1b\n" + : "+a" (dest), "+a" (src), "+d" (n) + : : "memory"); + return xdest; +} + +#define __HAVE_ARCH_STRCAT +#define strcat(d, s) ({ \ + char *__d = (d); \ + strcpy(__d + strlen(__d), (s)); \ +}) + +#define __HAVE_ARCH_STRCHR +static inline char *strchr(const char *s, int c) +{ + char sc, ch = c; + + for (; (sc = *s++) != ch; ) { + if (!sc) + return NULL; + } + return (char *)s - 1; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *cs, const char *ct) +{ + char res; + + asm ("\n" + "1: move.b (%0)+,%2\n" /* get *cs */ + " cmp.b (%1)+,%2\n" /* compare a byte */ + " jne 2f\n" /* not equal, break out */ + " tst.b %2\n" /* at end of cs? */ + " jne 1b\n" /* no, keep going */ + " jra 3f\n" /* strings are equal */ + "2: sub.b -(%1),%2\n" /* *cs - *ct */ + "3:" + : "+a" (cs), "+a" (ct), "=d" (res)); + return res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *, int, __kernel_size_t); +#define memset(d, c, n) __builtin_memset(d, c, n) + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *, const void *, __kernel_size_t); +#define memcpy(d, s, n) __builtin_memcpy(d, s, n) + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *, const void *, __kernel_size_t); +#define memcmp(d, s, n) __builtin_memcmp(d, s, n) + +#endif + +#endif /* _M68K_STRING_H_ */ diff --git a/arch/m68k/include/asm/string_no.h b/arch/m68k/include/asm/string_no.h new file mode 100644 index 0000000..af09e17 --- /dev/null +++ b/arch/m68k/include/asm/string_no.h @@ -0,0 +1,126 @@ +#ifndef _M68KNOMMU_STRING_H_ +#define _M68KNOMMU_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#include +#include + +#define __HAVE_ARCH_STRCPY +static inline char * strcpy(char * dest,const char *src) +{ + char *xdest = dest; + + __asm__ __volatile__ + ("1:\tmoveb %1@+,%0@+\n\t" + "jne 1b" + : "=a" (dest), "=a" (src) + : "0" (dest), "1" (src) : "memory"); + return xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char * strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + + if (n == 0) + return xdest; + + __asm__ __volatile__ + ("1:\tmoveb %1@+,%0@+\n\t" + "jeq 2f\n\t" + "subql #1,%2\n\t" + "jne 1b\n\t" + "2:" + : "=a" (dest), "=a" (src), "=d" (n) + : "0" (dest), "1" (src), "2" (n) + : "memory"); + return xdest; +} + + +#ifndef CONFIG_COLDFIRE + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char * cs,const char * ct) +{ + char __res; + + __asm__ + ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ + "cmpb %1@+,%2\n\t" /* compare a byte */ + "jne 2f\n\t" /* not equal, break out */ + "tstb %2\n\t" /* at end of cs? */ + "jne 1b\n\t" /* no, keep going */ + "jra 3f\n\t" /* strings are equal */ + "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ + "3:" + : "=a" (cs), "=a" (ct), "=d" (__res) + : "0" (cs), "1" (ct)); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char * cs,const char * ct,size_t count) +{ + char __res; + + if (!count) + return 0; + __asm__ + ("1:\tmovb %0@+,%3\n\t" /* get *cs */ + "cmpb %1@+,%3\n\t" /* compare a byte */ + "jne 3f\n\t" /* not equal, break out */ + "tstb %3\n\t" /* at end of cs? */ + "jeq 4f\n\t" /* yes, all done */ + "subql #1,%2\n\t" /* no, adjust count */ + "jne 1b\n\t" /* more to do, keep going */ + "2:\tmoveq #0,%3\n\t" /* strings are equal */ + "jra 4f\n\t" + "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ + "4:" + : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) + : "0" (cs), "1" (ct), "2" (count)); + return __res; +} + +#endif /* CONFIG_COLDFIRE */ + +#define __HAVE_ARCH_MEMSET +extern void * memset(void * s, int c, size_t count); + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *d, const void *s, size_t count); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ + +#endif /* _M68K_STRING_H_ */ diff --git a/arch/m68k/include/asm/sun3-head.h b/arch/m68k/include/asm/sun3-head.h new file mode 100644 index 0000000..05af2f1 --- /dev/null +++ b/arch/m68k/include/asm/sun3-head.h @@ -0,0 +1,10 @@ +#ifndef __SUN3_HEAD_H +#define __SUN3_HEAD_H + +#define KERNBASE 0xE000000 /* First address the kernel will eventually be */ +#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ +#define FC_CONTROL 3 +#define FC_SUPERD 5 +#define FC_CPU 7 + +#endif /* __SUN3_HEAD_H */ diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h new file mode 100644 index 0000000..d4c83f1 --- /dev/null +++ b/arch/m68k/include/asm/sun3_pgalloc.h @@ -0,0 +1,102 @@ +/* sun3_pgalloc.h -- + * reorganization around 2.3.39, routines moved from sun3_pgtable.h + * + * + * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam) + * + * moved 1/26/2000 Sam Creasey + */ + +#ifndef _SUN3_PGALLOC_H +#define _SUN3_PGALLOC_H + +#include + +/* FIXME - when we get this compiling */ +/* erm, now that it's compiling, what do we do with it? */ +#define _KERNPG_TABLE 0 + +extern const char bad_pmd_string[]; + +#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) + + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long) pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t page) +{ + pgtable_page_dtor(page); + __free_page(page); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), pte); \ +} while (0) + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT); + + if (!page) + return NULL; + + memset((void *)page, 0, PAGE_SIZE); + return (pte_t *) (page); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); + + if (page == NULL) + return NULL; + + clear_highpage(page); + pgtable_page_ctor(page); + return page; + +} + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) +{ + pmd_val(*pmd) = __pa((unsigned long)pte); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) +{ + pmd_val(*pmd) = __pa((unsigned long)page_address(page)); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x) do { } while (0) + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_page((unsigned long) pgd); +} + +static inline pgd_t * pgd_alloc(struct mm_struct *mm) +{ + pgd_t *new_pgd; + + new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL); + memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); + memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT)); + return new_pgd; +} + +#define pgd_populate(mm, pmd, pte) BUG() + +#endif /* SUN3_PGALLOC_H */ diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h new file mode 100644 index 0000000..f847ec7 --- /dev/null +++ b/arch/m68k/include/asm/sun3_pgtable.h @@ -0,0 +1,234 @@ +#ifndef _SUN3_PGTABLE_H +#define _SUN3_PGTABLE_H + +#include + +#ifndef __ASSEMBLY__ +#include +#include + +/* + * This file contains all the things which change drastically for the sun3 + * pagetable stuff, to avoid making too much of a mess of the generic m68k + * `pgtable.h'; this should only be included from the generic file. --m + */ + +/* For virtual address to physical address conversion */ +#define VTOP(addr) __pa(addr) +#define PTOV(addr) __va(addr) + + +#endif /* !__ASSEMBLY__ */ + +/* These need to be defined for compatibility although the sun3 doesn't use them */ +#define _PAGE_NOCACHE030 0x040 +#define _CACHEMASK040 (~0x060) +#define _PAGE_NOCACHE_S 0x040 + +/* Page protection values within PTE. */ +#define SUN3_PAGE_VALID (0x80000000) +#define SUN3_PAGE_WRITEABLE (0x40000000) +#define SUN3_PAGE_SYSTEM (0x20000000) +#define SUN3_PAGE_NOCACHE (0x10000000) +#define SUN3_PAGE_ACCESSED (0x02000000) +#define SUN3_PAGE_MODIFIED (0x01000000) + + +/* Externally used page protection values. */ +#define _PAGE_PRESENT (SUN3_PAGE_VALID) +#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED) + +#define PTE_FILE_MAX_BITS 28 + +/* Compound page protection values. */ +//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix... +// is it just PAGE_KERNEL and PAGE_SHARED? +#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_ACCESSED \ + | SUN3_PAGE_NOCACHE) +#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_WRITEABLE \ + | SUN3_PAGE_ACCESSED \ + | SUN3_PAGE_NOCACHE) +#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_ACCESSED \ + | SUN3_PAGE_NOCACHE) +#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_ACCESSED \ + | SUN3_PAGE_NOCACHE) +#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_WRITEABLE \ + | SUN3_PAGE_SYSTEM \ + | SUN3_PAGE_NOCACHE \ + | SUN3_PAGE_ACCESSED \ + | SUN3_PAGE_MODIFIED) +#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \ + | SUN3_PAGE_WRITEABLE \ + | SUN3_PAGE_SYSTEM \ + | SUN3_PAGE_NOCACHE) + +/* + * Page protections for initialising protection_map. The sun3 has only two + * protection settings, valid (implying read and execute) and writeable. These + * are as close as we can get... + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED + +/* Use these fake page-protections on PMDs. */ +#define SUN3_PMD_VALID (0x00000001) +#define SUN3_PMD_MASK (0x0000003F) +#define SUN3_PMD_MAGIC (0x0000002B) + +#ifndef __ASSEMBLY__ + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +#define pmd_set(pmdp,ptep) do {} while (0) + +static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) +{ + pgd_val(*pgdp) = virt_to_phys(pmdp); +} + +#define __pte_page(pte) \ +((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT)) +#define __pmd_page(pmd) \ +((unsigned long) __va (pmd_val (pmd) & PAGE_MASK)) + +static inline int pte_none (pte_t pte) { return !pte_val (pte); } +static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; } +static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_val (*ptep) = 0; +} + +#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK) +#define pfn_pte(pfn, pgprot) \ +({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; }) + +#define pte_page(pte) virt_to_page(__pte_page(pte)) +#define pmd_page(pmd) virt_to_page(__pmd_page(pmd)) + + +static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); } +#define pmd_none(pmd) pmd_none2(&(pmd)) +//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; } +static inline int pmd_bad2 (pmd_t *pmd) { return 0; } +#define pmd_bad(pmd) pmd_bad2(&(pmd)) +static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; } +/* #define pmd_present(pmd) pmd_present2(&(pmd)) */ +#define pmd_present(pmd) (!pmd_none2(&(pmd))) +static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; } + +static inline int pgd_none (pgd_t pgd) { return 0; } +static inline int pgd_bad (pgd_t pgd) { return 0; } +static inline int pgd_present (pgd_t pgd) { return 1; } +static inline void pgd_clear (pgd_t *pgdp) {} + + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not... + * [we have the full set here even if they don't change from m68k] + */ +static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } +static inline int pte_special(pte_t pte) { return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; } +static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; } +static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; } +// use this version when caches work... +//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; } +// until then, use: +static inline pte_t pte_mkcache(pte_t pte) { return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; + +/* Find an entry in a pagetable directory. */ +#define pgd_index(address) ((address) >> PGDIR_SHIFT) + +#define pgd_offset(mm, address) \ +((mm)->pgd + pgd_index(address)) + +/* Find an entry in a kernel pagetable directory. */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the second-level pagetable. */ +static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address) +{ + return (pmd_t *) pgd; +} + +static inline unsigned long pte_to_pgoff(pte_t pte) +{ + return pte.pte & SUN3_PAGE_PGNUM_MASK; +} + +static inline pte_t pgoff_to_pte(unsigned off) +{ + pte_t pte = { off + SUN3_PAGE_ACCESSED }; + return pte; +} + + +/* Find an entry in the third-level pagetable. */ +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) +#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address)) +/* FIXME: should we bother with kmap() here? */ +#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address)) +#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address) +#define pte_unmap(pte) kunmap(pte) +#define pte_unmap_nested(pte) kunmap(pte) + +/* Macros to (de)construct the fake PTEs representing swap pages. */ +#define __swp_type(x) ((x).val & 0x7F) +#define __swp_offset(x) (((x).val) >> 7) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#endif /* !__ASSEMBLY__ */ +#endif /* !_SUN3_PGTABLE_H */ diff --git a/arch/m68k/include/asm/sun3ints.h b/arch/m68k/include/asm/sun3ints.h new file mode 100644 index 0000000..309d6e6 --- /dev/null +++ b/arch/m68k/include/asm/sun3ints.h @@ -0,0 +1,37 @@ +/* + * sun3ints.h -- Linux/Sun3 interrupt handling code definitions + * + * Erik Verbruggen (erik@bigmama.xtdnet.nl) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef SUN3INTS_H +#define SUN3INTS_H + +#include +#include +#include +#include +#include +#include + +#define SUN3_INT_VECS 192 + +void sun3_enable_irq(unsigned int irq); +void sun3_disable_irq(unsigned int irq); +extern void sun3_init_IRQ (void); +extern void sun3_enable_interrupts (void); +extern void sun3_disable_interrupts (void); +extern volatile unsigned char* sun3_intreg; + +/* master list of VME vectors -- don't fuck with this */ +#define SUN3_VEC_FLOPPY (IRQ_USER+0) +#define SUN3_VEC_VMESCSI0 (IRQ_USER+0) +#define SUN3_VEC_VMESCSI1 (IRQ_USER+1) +#define SUN3_VEC_CG (IRQ_USER+104) + + +#endif /* SUN3INTS_H */ diff --git a/arch/m68k/include/asm/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h new file mode 100644 index 0000000..d8f17a0 --- /dev/null +++ b/arch/m68k/include/asm/sun3mmu.h @@ -0,0 +1,171 @@ +/* + * Definitions for Sun3 custom MMU. + */ +#ifndef __SUN3_MMU_H__ +#define __SUN3_MMU_H__ + +#include +#include +#include + +/* MMU characteristics. */ +#define SUN3_SEGMAPS_PER_CONTEXT 2048 +#define SUN3_PMEGS_NUM 256 +#define SUN3_CONTEXTS_NUM 8 + +#define SUN3_PMEG_SIZE_BITS 17 +#define SUN3_PMEG_SIZE (1 << SUN3_PMEG_SIZE_BITS) +#define SUN3_PMEG_MASK (SUN3_PMEG_SIZE - 1) + +#define SUN3_PTE_SIZE_BITS 13 +#define SUN3_PTE_SIZE (1 << SUN3_PTE_SIZE_BITS) +#define SUN3_PTE_MASK (SUN3_PTE_SIZE - 1) + +#define SUN3_CONTROL_MASK (0x0FFFFFFC) +#define SUN3_INVALID_PMEG 255 +#define SUN3_INVALID_CONTEXT 255 + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \ + | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED) + +/* Bus access type within PTE. */ +#define SUN3_PAGE_TYPE_MASK (0x0c000000) +#define SUN3_PAGE_TYPE_MEMORY (0x00000000) +#define SUN3_PAGE_TYPE_IO (0x04000000) +#define SUN3_PAGE_TYPE_VME16 (0x08000000) +#define SUN3_PAGE_TYPE_VME32 (0x0c000000) + +/* Mask for page number within PTE. */ +#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF) + +/* Bits within bus-error register. */ +#define SUN3_BUSERR_WATCHDOG (0x01) +#define SUN3_BUSERR_unused (0x02) +#define SUN3_BUSERR_FPAENERR (0x04) +#define SUN3_BUSERR_FPABERR (0x08) +#define SUN3_BUSERR_VMEBERR (0x10) +#define SUN3_BUSERR_TIMEOUT (0x20) +#define SUN3_BUSERR_PROTERR (0x40) +#define SUN3_BUSERR_INVALID (0x80) + +#ifndef __ASSEMBLY__ + +/* Read bus error status register (implicitly clearing it). */ +static inline unsigned char sun3_get_buserr(void) +{ + unsigned char sfc, c; + + GET_SFC (sfc); + SET_SFC (FC_CONTROL); + GET_CONTROL_BYTE (AC_BUS_ERROR, c); + SET_SFC (sfc); + + return c; +} + +/* Read segmap from hardware MMU. */ +static inline unsigned long sun3_get_segmap(unsigned long addr) +{ + register unsigned long entry; + unsigned char c, sfc; + + GET_SFC (sfc); + SET_SFC (FC_CONTROL); + GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c); + SET_SFC (sfc); + entry = c; + + return entry; +} + +/* Write segmap to hardware MMU. */ +static inline void sun3_put_segmap(unsigned long addr, unsigned long entry) +{ + unsigned char sfc; + + GET_DFC (sfc); + SET_DFC (FC_CONTROL); + SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry); + SET_DFC (sfc); + + return; +} + +/* Read PTE from hardware MMU. */ +static inline unsigned long sun3_get_pte(unsigned long addr) +{ + register unsigned long entry; + unsigned char sfc; + + GET_SFC (sfc); + SET_SFC (FC_CONTROL); + GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); + SET_SFC (sfc); + + return entry; +} + +/* Write PTE to hardware MMU. */ +static inline void sun3_put_pte(unsigned long addr, unsigned long entry) +{ + unsigned char sfc; + + GET_DFC (sfc); + SET_DFC (FC_CONTROL); + SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); + SET_DFC (sfc); + + return; +} + +/* get current context */ +static inline unsigned char sun3_get_context(void) +{ + unsigned char sfc, c; + + GET_SFC(sfc); + SET_SFC(FC_CONTROL); + GET_CONTROL_BYTE(AC_CONTEXT, c); + SET_SFC(sfc); + + return c; +} + +/* set alternate context */ +static inline void sun3_put_context(unsigned char c) +{ + unsigned char dfc; + GET_DFC(dfc); + SET_DFC(FC_CONTROL); + SET_CONTROL_BYTE(AC_CONTEXT, c); + SET_DFC(dfc); + + return; +} + +extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size, + unsigned long type); + +extern int sun3_map_test(unsigned long addr, char *val); + +#endif /* !__ASSEMBLY__ */ + +#endif /* !__SUN3_MMU_H__ */ diff --git a/arch/m68k/include/asm/sun3x.h b/arch/m68k/include/asm/sun3x.h new file mode 100644 index 0000000..f5691a1 --- /dev/null +++ b/arch/m68k/include/asm/sun3x.h @@ -0,0 +1,27 @@ +#ifndef SUN3X_H +#define SUN3X_H + +/* hardware addresses */ +#define SUN3X_IOMMU 0x60000000 +#define SUN3X_ENAREG 0x61000000 +#define SUN3X_INTREG 0x61001400 +#define SUN3X_DIAGREG 0x61001800 +#define SUN3X_ZS1 0x62000000 +#define SUN3X_ZS2 0x62002000 +#define SUN3X_LANCE 0x65002000 +#define SUN3X_EEPROM 0x64000000 +#define SUN3X_IDPROM 0x640007d8 +#define SUN3X_VIDEO_BASE 0x50000000 +#define SUN3X_VIDEO_P4ID 0x50300000 +#define SUN3X_ESP_BASE 0x66000000 +#define SUN3X_ESP_DMA 0x66001000 +#define SUN3X_FDC 0x6e000000 +#define SUN3X_FDC_FCR 0x6e000400 +#define SUN3X_FDC_FVR 0x6e000800 + +/* some NVRAM addresses */ +#define SUN3X_EEPROM_CONS (SUN3X_EEPROM + 0x1f) +#define SUN3X_EEPROM_PORTA (SUN3X_EEPROM + 0x58) +#define SUN3X_EEPROM_PORTB (SUN3X_EEPROM + 0x60) + +#endif diff --git a/arch/m68k/include/asm/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h new file mode 100644 index 0000000..32c45f8 --- /dev/null +++ b/arch/m68k/include/asm/sun3xflop.h @@ -0,0 +1,263 @@ +/* sun3xflop.h: Sun3/80 specific parts of the floppy driver. + * + * Derived partially from asm-sparc/floppy.h, which is: + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net) + */ + +#ifndef __ASM_SUN3X_FLOPPY_H +#define __ASM_SUN3X_FLOPPY_H + +#include +#include +#include +#include +#include + +/* default interrupt vector */ +#define SUN3X_FDC_IRQ 0x40 + +/* some constants */ +#define FCR_TC 0x1 +#define FCR_EJECT 0x2 +#define FCR_MTRON 0x4 +#define FCR_DSEL1 0x8 +#define FCR_DSEL0 0x10 + +/* We don't need no stinkin' I/O port allocation crap. */ +#undef release_region +#undef request_region +#define release_region(X, Y) do { } while(0) +#define request_region(X, Y, Z) (1) + +struct sun3xflop_private { + volatile unsigned char *status_r; + volatile unsigned char *data_r; + volatile unsigned char *fcr_r; + volatile unsigned char *fvr_r; + unsigned char fcr; +} sun3x_fdc; + +/* Super paranoid... */ +#undef HAVE_DISABLE_HLT + +/* Routines unique to each controller type on a Sun. */ +static unsigned char sun3x_82072_fd_inb(int port) +{ + static int once = 0; +// udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 4: /* FD_STATUS */ + return (*sun3x_fdc.status_r) & ~STATUS_DMA; + case 5: /* FD_DATA */ + return (*sun3x_fdc.data_r); + case 7: /* FD_DIR */ + /* ugly hack, I can't find a way to actually detect the disk */ + if(!once) { + once = 1; + return 0x80; + } + return 0; + }; + panic("sun_82072_fd_inb: How did I get here?"); +} + +static void sun3x_82072_fd_outb(unsigned char value, int port) +{ +// udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + /* Oh geese, 82072 on the Sun has no DOR register, + * so we make do with taunting the FCR. + * + * ASSUMPTIONS: There will only ever be one floppy + * drive attached to a Sun controller + * and it will be at drive zero. + */ + + { + unsigned char fcr = sun3x_fdc.fcr; + + if(value & 0x10) { + fcr |= (FCR_DSEL0 | FCR_MTRON); + } else + fcr &= ~(FCR_DSEL0 | FCR_MTRON); + + + if(fcr != sun3x_fdc.fcr) { + *(sun3x_fdc.fcr_r) = fcr; + sun3x_fdc.fcr = fcr; + } + } + break; + case 5: /* FD_DATA */ + *(sun3x_fdc.data_r) = value; + break; + case 7: /* FD_DCR */ + *(sun3x_fdc.status_r) = value; + break; + case 4: /* FD_STATUS */ + *(sun3x_fdc.status_r) = value; + break; + }; + return; +} + + +asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id) +{ + register unsigned char st; + +#undef TRACE_FLPY_INT +#define NO_FLOPPY_ASSEMBLER + +#ifdef TRACE_FLPY_INT + static int calls=0; + static int bytes=0; + static int dma_wait=0; +#endif + if(!doing_pdma) { + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + +// printk("doing pdma\n");// st %x\n", sun_fdc->status_82072); + +#ifdef TRACE_FLPY_INT + if(!calls) + bytes = virtual_dma_count; +#endif + + { + register int lcount; + register char *lptr; + + for(lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { +/* st=fd_inb(virtual_dma_port+4) & 0x80 ; */ + st = *(sun3x_fdc.status_r); +/* if(st != 0xa0) */ +/* break; */ + + if((st & 0x80) == 0) { + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + return IRQ_HANDLED; + } + + if((st & 0x20) == 0) + break; + + if(virtual_dma_mode) +/* fd_outb(*lptr, virtual_dma_port+5); */ + *(sun3x_fdc.data_r) = *lptr; + else +/* *lptr = fd_inb(virtual_dma_port+5); */ + *lptr = *(sun3x_fdc.data_r); + } + + virtual_dma_count = lcount; + virtual_dma_addr = lptr; +/* st = fd_inb(virtual_dma_port+4); */ + st = *(sun3x_fdc.status_r); + } + +#ifdef TRACE_FLPY_INT + calls++; +#endif +// printk("st=%02x\n", st); + if(st == 0x20) + return IRQ_HANDLED; + if(!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_pdma = 0; + +#ifdef TRACE_FLPY_INT + printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n", + virtual_dma_count, virtual_dma_residue, calls, bytes, + dma_wait); + calls = 0; + dma_wait=0; +#endif + + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + + +#ifdef TRACE_FLPY_INT + if(!virtual_dma_count) + dma_wait++; +#endif + return IRQ_HANDLED; +} + +static int sun3xflop_request_irq(void) +{ + static int once = 0; + int error; + + if(!once) { + once = 1; + error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, + IRQF_DISABLED, "floppy", NULL); + return ((error == 0) ? 0 : -1); + } else return 0; +} + +static void __init floppy_set_flags(int *ints,int param, int param2); + +static int sun3xflop_init(void) +{ + if(FLOPPY_IRQ < 0x40) + FLOPPY_IRQ = SUN3X_FDC_IRQ; + + sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC; + sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1); + sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR; + sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR; + sun3x_fdc.fcr = 0; + + /* Last minute sanity check... */ + if(*sun3x_fdc.status_r == 0xff) { + return -1; + } + + *sun3x_fdc.fvr_r = FLOPPY_IRQ; + + *sun3x_fdc.fcr_r = FCR_TC; + udelay(10); + *sun3x_fdc.fcr_r = 0; + + /* Success... */ + floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this. + allowed_drive_mask = 0x01; + return (int) SUN3X_FDC; +} + +/* I'm not precisely sure this eject routine works */ +static int sun3x_eject(void) +{ + if(MACH_IS_SUN3X) { + + sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT); + *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; + udelay(10); + sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT); + *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; + } + + return 0; +} + +#define fd_eject(drive) sun3x_eject() + +#endif /* !(__ASM_SUN3X_FLOPPY_H) */ diff --git a/arch/m68k/include/asm/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h new file mode 100644 index 0000000..6735efc --- /dev/null +++ b/arch/m68k/include/asm/sun3xprom.h @@ -0,0 +1,43 @@ +/* Useful PROM locations */ + +#ifndef SUN3X_PROM_H +#define SUN3X_PROM_H + +extern void (*sun3x_putchar)(int); +extern int (*sun3x_getchar)(void); +extern int (*sun3x_mayget)(void); +extern int (*sun3x_mayput)(int); + +void sun3x_reboot(void); +void sun3x_abort(void); +void sun3x_prom_init(void); +unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size); + +/* interesting hardware locations */ +#define SUN3X_IOMMU 0x60000000 +#define SUN3X_ENAREG 0x61000000 +#define SUN3X_INTREG 0x61001400 +#define SUN3X_DIAGREG 0x61001800 +#define SUN3X_ZS1 0x62000000 +#define SUN3X_ZS2 0x62002000 +#define SUN3X_LANCE 0x65002000 +#define SUN3X_EEPROM 0x64000000 +#define SUN3X_IDPROM 0x640007d8 +#define SUN3X_VIDEO_BASE 0x50400000 +#define SUN3X_VIDEO_REGS 0x50300000 + +/* vector table */ +#define SUN3X_PROM_BASE 0xfefe0000 +#define SUN3X_P_GETCHAR (SUN3X_PROM_BASE + 20) +#define SUN3X_P_PUTCHAR (SUN3X_PROM_BASE + 24) +#define SUN3X_P_MAYGET (SUN3X_PROM_BASE + 28) +#define SUN3X_P_MAYPUT (SUN3X_PROM_BASE + 32) +#define SUN3X_P_REBOOT (SUN3X_PROM_BASE + 96) +#define SUN3X_P_SETLEDS (SUN3X_PROM_BASE + 144) +#define SUN3X_P_ABORT (SUN3X_PROM_BASE + 152) + +/* mapped area */ +#define SUN3X_MAP_START 0xfee00000 +#define SUN3X_MAP_END 0xff000000 + +#endif diff --git a/arch/m68k/include/asm/suspend.h b/arch/m68k/include/asm/suspend.h new file mode 100644 index 0000000..57b3ddb --- /dev/null +++ b/arch/m68k/include/asm/suspend.h @@ -0,0 +1,6 @@ +#ifndef _M68K_SUSPEND_H +#define _M68K_SUSPEND_H + +/* Dummy include. */ + +#endif /* _M68K_SUSPEND_H */ diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/m68k/include/asm/swab_mm.h b/arch/m68k/include/asm/swab_mm.h new file mode 100644 index 0000000..7221e30 --- /dev/null +++ b/arch/m68k/include/asm/swab_mm.h @@ -0,0 +1,16 @@ +#ifndef _M68K_SWAB_H +#define _M68K_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); + return val; +} +#define __arch_swab32 __arch_swab32 + +#endif /* _M68K_SWAB_H */ diff --git a/arch/m68k/include/asm/swab_no.h b/arch/m68k/include/asm/swab_no.h new file mode 100644 index 0000000..e582257 --- /dev/null +++ b/arch/m68k/include/asm/swab_no.h @@ -0,0 +1,24 @@ +#ifndef _M68KNOMMU_SWAB_H +#define _M68KNOMMU_SWAB_H + +#include + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + asm( + "byterev %0" + : "=d" (val) + : "0" (val) + ); + return val; +} + +#define __arch_swab32 __arch_swab32 +#endif + +#endif /* _M68KNOMMU_SWAB_H */ diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h new file mode 100644 index 0000000..ccea925 --- /dev/null +++ b/arch/m68k/include/asm/system.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "system_no.h" +#else +#include "system_mm.h" +#endif diff --git a/arch/m68k/include/asm/system_mm.h b/arch/m68k/include/asm/system_mm.h new file mode 100644 index 0000000..dbb6515 --- /dev/null +++ b/arch/m68k/include/asm/system_mm.h @@ -0,0 +1,218 @@ +#ifndef _M68K_SYSTEM_H +#define _M68K_SYSTEM_H + +#include +#include +#include +#include + +#ifdef __KERNEL__ + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1 + */ +asmlinkage void resume(void); +#define switch_to(prev,next,last) do { \ + register void *_prev __asm__ ("a0") = (prev); \ + register void *_next __asm__ ("a1") = (next); \ + register void *_last __asm__ ("d1"); \ + __asm__ __volatile__("jbsr resume" \ + : "=a" (_prev), "=a" (_next), "=d" (_last) \ + : "0" (_prev), "1" (_next) \ + : "d0", "d2", "d3", "d4", "d5"); \ + (last) = _last; \ +} while (0) + + +/* + * Force strict CPU ordering. + * Not really required on m68k... + */ +#define nop() do { asm volatile ("nop"); barrier(); } while (0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() ((void)0) +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() ((void)0) + +/* interrupt control.. */ +#if 0 +#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") +#else +#include +#define local_irq_enable() ({ \ + if (MACH_IS_Q40 || !hardirq_count()) \ + asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ +}) +#endif +#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") +#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") +#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") + +static inline int irqs_disabled(void) +{ + unsigned long flags; + local_save_flags(flags); + return flags & ~ALLOWINT; +} + +/* For spinlocks etc */ +#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); }) + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +#ifndef CONFIG_RMW_INSNS +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + unsigned long flags, tmp; + + local_irq_save(flags); + + switch (size) { + case 1: + tmp = *(u8 *)ptr; + *(u8 *)ptr = x; + x = tmp; + break; + case 2: + tmp = *(u16 *)ptr; + *(u16 *)ptr = x; + x = tmp; + break; + case 4: + tmp = *(u32 *)ptr; + *(u32 *)ptr = x; + x = tmp; + break; + default: + BUG(); + } + + local_irq_restore(flags); + return x; +} +#else +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "1:\n\t" + "casb %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "1:\n\t" + "casw %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "1:\n\t" + "casl %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + return x; +} +#endif + +#include + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ +#ifdef CONFIG_RMW_INSNS +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ ("casb %0,%2,%1" + : "=d" (old), "=m" (*(char *)p) + : "d" (new), "0" (old), "m" (*(char *)p)); + break; + case 2: + __asm__ __volatile__ ("casw %0,%2,%1" + : "=d" (old), "=m" (*(short *)p) + : "d" (new), "0" (old), "m" (*(short *)p)); + break; + case 4: + __asm__ __volatile__ ("casl %0,%2,%1" + : "=d" (old), "=m" (*(int *)p) + : "d" (new), "0" (old), "m" (*(int *)p)); + break; + } + return old; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#else + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) + +#ifndef CONFIG_SMP +#include +#endif + +#endif + +#define arch_align_stack(x) (x) + +#endif /* __KERNEL__ */ + +#endif /* _M68K_SYSTEM_H */ diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h new file mode 100644 index 0000000..40f49de --- /dev/null +++ b/arch/m68k/include/asm/system_no.h @@ -0,0 +1,324 @@ +#ifndef _M68KNOMMU_SYSTEM_H +#define _M68KNOMMU_SYSTEM_H + +#include +#include +#include + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1, offset of tss in d1, and whether + * the mm structures are shared in d2 (to avoid atc flushing). + */ +asmlinkage void resume(void); +#define switch_to(prev,next,last) \ +{ \ + void *_last; \ + __asm__ __volatile__( \ + "movel %1, %%a0\n\t" \ + "movel %2, %%a1\n\t" \ + "jbsr resume\n\t" \ + "movel %%d1, %0\n\t" \ + : "=d" (_last) \ + : "d" (prev), "d" (next) \ + : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ + (last) = _last; \ +} + +#ifdef CONFIG_COLDFIRE +#define local_irq_enable() __asm__ __volatile__ ( \ + "move %/sr,%%d0\n\t" \ + "andi.l #0xf8ff,%%d0\n\t" \ + "move %%d0,%/sr\n" \ + : /* no outputs */ \ + : \ + : "cc", "%d0", "memory") +#define local_irq_disable() __asm__ __volatile__ ( \ + "move %/sr,%%d0\n\t" \ + "ori.l #0x0700,%%d0\n\t" \ + "move %%d0,%/sr\n" \ + : /* no outputs */ \ + : \ + : "cc", "%d0", "memory") +/* For spinlocks etc */ +#define local_irq_save(x) __asm__ __volatile__ ( \ + "movew %%sr,%0\n\t" \ + "movew #0x0700,%%d0\n\t" \ + "or.l %0,%%d0\n\t" \ + "movew %%d0,%/sr" \ + : "=d" (x) \ + : \ + : "cc", "%d0", "memory") +#else + +/* portable version */ /* FIXME - see entry.h*/ +#define ALLOWINT 0xf8ff + +#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") +#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") +#endif + +#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") +#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") + +/* For spinlocks etc */ +#ifndef local_irq_save +#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) +#endif + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + ((flags & 0x0700) == 0x0700); \ +}) + +#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") + +/* + * Force strict CPU ordering. + * Not really required on m68k... + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define read_barrier_depends() ((void)0) + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +#ifndef CONFIG_RMW_INSNS +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + unsigned long tmp, flags; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "moveb %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "movew %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "movel %1,%2" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + local_irq_restore(flags); + return tmp; +} +#else +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "1:\n\t" + "casb %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "1:\n\t" + "casw %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "1:\n\t" + "casl %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + return x; +} +#endif + +#include + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#ifndef CONFIG_SMP +#include +#endif + +#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ + defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) +#define HARD_RESET_NOW() ({ \ + local_irq_disable(); \ + asm(" \ + moveal #0x10c00000, %a0; \ + moveb #0, 0xFFFFF300; \ + moveal 0(%a0), %sp; \ + moveal 4(%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#endif + +#ifdef CONFIG_COLDFIRE +#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) +/* + * Need to account for broken early mask of 5272 silicon. So don't + * jump through the original start address. Jump strait into the + * known start of the FLASH code. + */ +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + jmp 0xf0000400; \ + "); \ +}) +#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ + defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + moveal #0x10000044, %a0; \ + movel #0xffffffff, (%a0); \ + moveal #0x10000001, %a0; \ + moveb #0x00, (%a0); \ + moveal #0xf0000004, %a0; \ + moveal (%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#elif defined(CONFIG_M5272) +/* + * Retrieve the boot address in flash using CSBR0 and CSOR0 + * find the reset vector at flash_address + 4 (e.g. 0x400) + * remap it in the flash's current location (e.g. 0xf0000400) + * and jump there. + */ +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %%sr; \ + move.l %0+0x40,%%d0; \ + and.l %0+0x44,%%d0; \ + andi.l #0xfffff000,%%d0; \ + mov.l %%d0,%%a0; \ + or.l 4(%%a0),%%d0; \ + mov.l %%d0,%%a0; \ + jmp (%%a0);" \ + : /* No output */ \ + : "o" (*(char *)MCF_MBAR) ); \ +}) +#elif defined(CONFIG_M528x) +/* + * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), + * that when set, resets the MCF528x. + */ +#define HARD_RESET_NOW() \ +({ \ + unsigned char volatile *reset; \ + asm("move.w #0x2700, %sr"); \ + reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ + while(1) \ + *reset |= (0x01 << 7);\ +}) +#elif defined(CONFIG_M523x) +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + movel #0x01000000, %sp; \ + moveal #0x40110000, %a0; \ + moveb #0x80, (%a0); \ + "); \ +}) +#elif defined(CONFIG_M520x) + /* + * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register + * RCR), that when set, resets the MCF5208. + */ +#define HARD_RESET_NOW() \ +({ \ + unsigned char volatile *reset; \ + asm("move.w #0x2700, %sr"); \ + reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ + while(1) \ + *reset |= 0x80; \ +}) +#else +#define HARD_RESET_NOW() ({ \ + asm(" \ + movew #0x2700, %sr; \ + moveal #0x4, %a0; \ + moveal (%a0), %a0; \ + jmp (%a0); \ + "); \ +}) +#endif +#endif +#define arch_align_stack(x) (x) + + +static inline int irqs_disabled_flags(unsigned long flags) +{ + if (flags & 0x0700) + return 0; + else + return 1; +} + +#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h new file mode 100644 index 0000000..8c14170 --- /dev/null +++ b/arch/m68k/include/asm/termbits.h @@ -0,0 +1,200 @@ +#ifndef __ARCH_M68K_TERMBITS_H__ +#define __ARCH_M68K_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h new file mode 100644 index 0000000..0823032 --- /dev/null +++ b/arch/m68k/include/asm/termios.h @@ -0,0 +1,92 @@ +#ifndef _M68K_TERMIOS_H +#define _M68K_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + get_user((termios)->c_line, &(termio)->c_line); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _M68K_TERMIOS_H */ diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h new file mode 100644 index 0000000..f31a3f4 --- /dev/null +++ b/arch/m68k/include/asm/thread_info.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "thread_info_no.h" +#else +#include "thread_info_mm.h" +#endif diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h new file mode 100644 index 0000000..af0fda4 --- /dev/null +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -0,0 +1,57 @@ +#ifndef _ASM_M68K_THREAD_INFO_H +#define _ASM_M68K_THREAD_INFO_H + +#include +#include + +struct thread_info { + struct task_struct *task; /* main task structure */ + unsigned long flags; + struct exec_domain *exec_domain; /* execution domain */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + __u32 cpu; /* should always be 0 on m68k */ + struct restart_block restart_block; +}; + +#define PREEMPT_ACTIVE 0x4000000 + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */ +#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT) + +#define init_thread_info (init_task.thread.info) +#define init_stack (init_thread_union.stack) + +#define task_thread_info(tsk) (&(tsk)->thread.info) +#define task_stack_page(tsk) ((tsk)->stack) +#define current_thread_info() task_thread_info(current) + +#define __HAVE_THREAD_FUNCTIONS + +#define setup_thread_stack(p, org) ({ \ + *(struct task_struct **)(p)->stack = (p); \ + task_thread_info(p)->task = (p); \ +}) + +#define end_of_stack(p) ((unsigned long *)(p)->stack + 1) + +/* entry.S relies on these definitions! + * bits 0-7 are tested at every exception exit + * bits 8-15 are also tested at syscall exit + */ +#define TIF_SIGPENDING 6 /* signal pending */ +#define TIF_NEED_RESCHED 7 /* rescheduling necessary */ +#define TIF_DELAYED_TRACE 14 /* single step a syscall */ +#define TIF_SYSCALL_TRACE 15 /* syscall trace active */ +#define TIF_MEMDIE 16 +#define TIF_FREEZE 17 /* thread is freezing for suspend */ + +#endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h new file mode 100644 index 0000000..82529f4 --- /dev/null +++ b/arch/m68k/include/asm/thread_info_no.h @@ -0,0 +1,100 @@ +/* thread_info.h: m68knommu low-level thread information + * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE_ORDER (0) +#else +#define THREAD_SIZE_ORDER (1) +#endif + +/* + * for asm files, THREAD_SIZE is now generated by asm-offsets.c + */ +#define THREAD_SIZE (PAGE_SIZE< preemptable, <0 => BUG */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__( + "move.l %%sp, %0 \n\t" + "and.l %1, %0" + : "=&d"(ti) + : "di" (~(THREAD_SIZE-1)) + ); + return ti; +} + +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 4 +#define TIF_FREEZE 16 /* is freezing for suspend */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1< +#define CLOCK_TICK_RATE MCF_CLK +#else +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#endif + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif diff --git a/arch/m68k/include/asm/tlb.h b/arch/m68k/include/asm/tlb.h new file mode 100644 index 0000000..1785cff --- /dev/null +++ b/arch/m68k/include/asm/tlb.h @@ -0,0 +1,20 @@ +#ifndef _M68K_TLB_H +#define _M68K_TLB_H + +/* + * m68k doesn't need any special per-pte or + * per-vma handling.. + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it + * fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include + +#endif /* _M68K_TLB_H */ diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h new file mode 100644 index 0000000..b6f93b3 --- /dev/null +++ b/arch/m68k/include/asm/tlbflush.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "tlbflush_no.h" +#else +#include "tlbflush_mm.h" +#endif diff --git a/arch/m68k/include/asm/tlbflush_mm.h b/arch/m68k/include/asm/tlbflush_mm.h new file mode 100644 index 0000000..acb6bf2 --- /dev/null +++ b/arch/m68k/include/asm/tlbflush_mm.h @@ -0,0 +1,219 @@ +#ifndef _M68K_TLBFLUSH_H +#define _M68K_TLBFLUSH_H + + +#ifndef CONFIG_SUN3 + +#include + +static inline void flush_tlb_kernel_page(void *addr) +{ + if (CPU_IS_040_OR_060) { + mm_segment_t old_fs = get_fs(); + set_fs(KERNEL_DS); + __asm__ __volatile__(".chip 68040\n\t" + "pflush (%0)\n\t" + ".chip 68k" + : : "a" (addr)); + set_fs(old_fs); + } else if (CPU_IS_020_OR_030) + __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr)); +} + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + if (CPU_IS_040_OR_060) + __asm__ __volatile__(".chip 68040\n\t" + "pflushan\n\t" + ".chip 68k"); + else if (CPU_IS_020_OR_030) + __asm__ __volatile__("pflush #0,#4"); +} + +static inline void __flush_tlb040_one(unsigned long addr) +{ + __asm__ __volatile__(".chip 68040\n\t" + "pflush (%0)\n\t" + ".chip 68k" + : : "a" (addr)); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + if (CPU_IS_040_OR_060) + __flush_tlb040_one(addr); + else if (CPU_IS_020_OR_030) + __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr)); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + if (CPU_IS_040_OR_060) + __asm__ __volatile__(".chip 68040\n\t" + "pflusha\n\t" + ".chip 68k"); + else if (CPU_IS_020_OR_030) + __asm__ __volatile__("pflusha"); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + if (mm == current->active_mm) + __flush_tlb(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + if (vma->vm_mm == current->active_mm) { + mm_segment_t old_fs = get_fs(); + set_fs(USER_DS); + __flush_tlb_one(addr); + set_fs(old_fs); + } +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + if (vma->vm_mm == current->active_mm) + __flush_tlb(); +} + +static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + flush_tlb_all(); +} + +#else + + +/* Reserved PMEGs. */ +extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM]; +extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM]; +extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM]; +extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM]; + +/* Flush all userspace mappings one by one... (why no flush command, + sun?) */ +static inline void flush_tlb_all(void) +{ + unsigned long addr; + unsigned char ctx, oldctx; + + oldctx = sun3_get_context(); + for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) { + for(ctx = 0; ctx < 8; ctx++) { + sun3_put_context(ctx); + sun3_put_segmap(addr, SUN3_INVALID_PMEG); + } + } + + sun3_put_context(oldctx); + /* erase all of the userspace pmeg maps, we've clobbered them + all anyway */ + for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) { + if(pmeg_alloc[addr] == 1) { + pmeg_alloc[addr] = 0; + pmeg_ctx[addr] = 0; + pmeg_vaddr[addr] = 0; + } + } + +} + +/* Clear user TLB entries within the context named in mm */ +static inline void flush_tlb_mm (struct mm_struct *mm) +{ + unsigned char oldctx; + unsigned char seg; + unsigned long i; + + oldctx = sun3_get_context(); + sun3_put_context(mm->context); + + for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) { + seg = sun3_get_segmap(i); + if(seg == SUN3_INVALID_PMEG) + continue; + + sun3_put_segmap(i, SUN3_INVALID_PMEG); + pmeg_alloc[seg] = 0; + pmeg_ctx[seg] = 0; + pmeg_vaddr[seg] = 0; + } + + sun3_put_context(oldctx); + +} + +/* Flush a single TLB page. In this case, we're limited to flushing a + single PMEG */ +static inline void flush_tlb_page (struct vm_area_struct *vma, + unsigned long addr) +{ + unsigned char oldctx; + unsigned char i; + + oldctx = sun3_get_context(); + sun3_put_context(vma->vm_mm->context); + addr &= ~SUN3_PMEG_MASK; + if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG) + { + pmeg_alloc[i] = 0; + pmeg_ctx[i] = 0; + pmeg_vaddr[i] = 0; + sun3_put_segmap (addr, SUN3_INVALID_PMEG); + } + sun3_put_context(oldctx); + +} +/* Flush a range of pages from TLB. */ + +static inline void flush_tlb_range (struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + unsigned char seg, oldctx; + + start &= ~SUN3_PMEG_MASK; + + oldctx = sun3_get_context(); + sun3_put_context(mm->context); + + while(start < end) + { + if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG) + goto next; + if(pmeg_ctx[seg] == mm->context) { + pmeg_alloc[seg] = 0; + pmeg_ctx[seg] = 0; + pmeg_vaddr[seg] = 0; + } + sun3_put_segmap(start, SUN3_INVALID_PMEG); + next: + start += SUN3_PMEG_SIZE; + } +} + +static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + flush_tlb_all(); +} + +/* Flush kernel page from TLB. */ +static inline void flush_tlb_kernel_page (unsigned long addr) +{ + sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG); +} + +#endif + +#endif /* _M68K_TLBFLUSH_H */ diff --git a/arch/m68k/include/asm/tlbflush_no.h b/arch/m68k/include/asm/tlbflush_no.h new file mode 100644 index 0000000..a470cfb --- /dev/null +++ b/arch/m68k/include/asm/tlbflush_no.h @@ -0,0 +1,55 @@ +#ifndef _M68KNOMMU_TLBFLUSH_H +#define _M68KNOMMU_TLBFLUSH_H + +/* + * Copyright (C) 2000 Lineo, David McCullough + * Copyright (C) 2000-2002, Greg Ungerer + */ + +#include + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +#endif /* _M68KNOMMU_TLBFLUSH_H */ diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h new file mode 100644 index 0000000..ca173e9 --- /dev/null +++ b/arch/m68k/include/asm/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_M68K_TOPOLOGY_H +#define _ASM_M68K_TOPOLOGY_H + +#include + +#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h new file mode 100644 index 0000000..3011ec0 --- /dev/null +++ b/arch/m68k/include/asm/traps.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "traps_no.h" +#else +#include "traps_mm.h" +#endif diff --git a/arch/m68k/include/asm/traps_mm.h b/arch/m68k/include/asm/traps_mm.h new file mode 100644 index 0000000..8caef25 --- /dev/null +++ b/arch/m68k/include/asm/traps_mm.h @@ -0,0 +1,272 @@ +/* + * linux/include/asm/traps.h + * + * Copyright (C) 1993 Hamish Macdonald + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _M68K_TRAPS_H +#define _M68K_TRAPS_H + +#ifndef __ASSEMBLY__ + +#include +#include + +typedef void (*e_vector)(void); + +asmlinkage void auto_inthandler(void); +asmlinkage void user_inthandler(void); +asmlinkage void bad_inthandler(void); + +extern e_vector vectors[]; + +#endif + +#define VEC_RESETSP (0) +#define VEC_RESETPC (1) +#define VEC_BUSERR (2) +#define VEC_ADDRERR (3) +#define VEC_ILLEGAL (4) +#define VEC_ZERODIV (5) +#define VEC_CHK (6) +#define VEC_TRAP (7) +#define VEC_PRIV (8) +#define VEC_TRACE (9) +#define VEC_LINE10 (10) +#define VEC_LINE11 (11) +#define VEC_RESV12 (12) +#define VEC_COPROC (13) +#define VEC_FORMAT (14) +#define VEC_UNINT (15) +#define VEC_RESV16 (16) +#define VEC_RESV17 (17) +#define VEC_RESV18 (18) +#define VEC_RESV19 (19) +#define VEC_RESV20 (20) +#define VEC_RESV21 (21) +#define VEC_RESV22 (22) +#define VEC_RESV23 (23) +#define VEC_SPUR (24) +#define VEC_INT1 (25) +#define VEC_INT2 (26) +#define VEC_INT3 (27) +#define VEC_INT4 (28) +#define VEC_INT5 (29) +#define VEC_INT6 (30) +#define VEC_INT7 (31) +#define VEC_SYS (32) +#define VEC_TRAP1 (33) +#define VEC_TRAP2 (34) +#define VEC_TRAP3 (35) +#define VEC_TRAP4 (36) +#define VEC_TRAP5 (37) +#define VEC_TRAP6 (38) +#define VEC_TRAP7 (39) +#define VEC_TRAP8 (40) +#define VEC_TRAP9 (41) +#define VEC_TRAP10 (42) +#define VEC_TRAP11 (43) +#define VEC_TRAP12 (44) +#define VEC_TRAP13 (45) +#define VEC_TRAP14 (46) +#define VEC_TRAP15 (47) +#define VEC_FPBRUC (48) +#define VEC_FPIR (49) +#define VEC_FPDIVZ (50) +#define VEC_FPUNDER (51) +#define VEC_FPOE (52) +#define VEC_FPOVER (53) +#define VEC_FPNAN (54) +#define VEC_FPUNSUP (55) +#define VEC_MMUCFG (56) +#define VEC_MMUILL (57) +#define VEC_MMUACC (58) +#define VEC_RESV59 (59) +#define VEC_UNIMPEA (60) +#define VEC_UNIMPII (61) +#define VEC_RESV62 (62) +#define VEC_RESV63 (63) +#define VEC_USER (64) + +#define VECOFF(vec) ((vec)<<2) + +#ifndef __ASSEMBLY__ + +/* Status register bits */ +#define PS_T (0x8000) +#define PS_S (0x2000) +#define PS_M (0x1000) +#define PS_C (0x0001) + +/* bits for 68020/68030 special status word */ + +#define FC (0x8000) +#define FB (0x4000) +#define RC (0x2000) +#define RB (0x1000) +#define DF (0x0100) +#define RM (0x0080) +#define RW (0x0040) +#define SZ (0x0030) +#define DFC (0x0007) + +/* bits for 68030 MMU status register (mmusr,psr) */ + +#define MMU_B (0x8000) /* bus error */ +#define MMU_L (0x4000) /* limit violation */ +#define MMU_S (0x2000) /* supervisor violation */ +#define MMU_WP (0x0800) /* write-protected */ +#define MMU_I (0x0400) /* invalid descriptor */ +#define MMU_M (0x0200) /* ATC entry modified */ +#define MMU_T (0x0040) /* transparent translation */ +#define MMU_NUM (0x0007) /* number of levels traversed */ + + +/* bits for 68040 special status word */ +#define CP_040 (0x8000) +#define CU_040 (0x4000) +#define CT_040 (0x2000) +#define CM_040 (0x1000) +#define MA_040 (0x0800) +#define ATC_040 (0x0400) +#define LK_040 (0x0200) +#define RW_040 (0x0100) +#define SIZ_040 (0x0060) +#define TT_040 (0x0018) +#define TM_040 (0x0007) + +/* bits for 68040 write back status word */ +#define WBV_040 (0x80) +#define WBSIZ_040 (0x60) +#define WBBYT_040 (0x20) +#define WBWRD_040 (0x40) +#define WBLNG_040 (0x00) +#define WBTT_040 (0x18) +#define WBTM_040 (0x07) + +/* bus access size codes */ +#define BA_SIZE_BYTE (0x20) +#define BA_SIZE_WORD (0x40) +#define BA_SIZE_LONG (0x00) +#define BA_SIZE_LINE (0x60) + +/* bus access transfer type codes */ +#define BA_TT_MOVE16 (0x08) + +/* bits for 68040 MMU status register (mmusr) */ +#define MMU_B_040 (0x0800) +#define MMU_G_040 (0x0400) +#define MMU_S_040 (0x0080) +#define MMU_CM_040 (0x0060) +#define MMU_M_040 (0x0010) +#define MMU_WP_040 (0x0004) +#define MMU_T_040 (0x0002) +#define MMU_R_040 (0x0001) + +/* bits in the 68060 fault status long word (FSLW) */ +#define MMU060_MA (0x08000000) /* misaligned */ +#define MMU060_LK (0x02000000) /* locked transfer */ +#define MMU060_RW (0x01800000) /* read/write */ +# define MMU060_RW_W (0x00800000) /* write */ +# define MMU060_RW_R (0x01000000) /* read */ +# define MMU060_RW_RMW (0x01800000) /* read/modify/write */ +# define MMU060_W (0x00800000) /* general write, includes rmw */ +#define MMU060_SIZ (0x00600000) /* transfer size */ +#define MMU060_TT (0x00180000) /* transfer type (TT) bits */ +#define MMU060_TM (0x00070000) /* transfer modifier (TM) bits */ +#define MMU060_IO (0x00008000) /* instruction or operand */ +#define MMU060_PBE (0x00004000) /* push buffer bus error */ +#define MMU060_SBE (0x00002000) /* store buffer bus error */ +#define MMU060_PTA (0x00001000) /* pointer A fault */ +#define MMU060_PTB (0x00000800) /* pointer B fault */ +#define MMU060_IL (0x00000400) /* double indirect descr fault */ +#define MMU060_PF (0x00000200) /* page fault (invalid descr) */ +#define MMU060_SP (0x00000100) /* supervisor protection */ +#define MMU060_WP (0x00000080) /* write protection */ +#define MMU060_TWE (0x00000040) /* bus error on table search */ +#define MMU060_RE (0x00000020) /* bus error on read */ +#define MMU060_WE (0x00000010) /* bus error on write */ +#define MMU060_TTR (0x00000008) /* error caused by TTR translation */ +#define MMU060_BPE (0x00000004) /* branch prediction error */ +#define MMU060_SEE (0x00000001) /* software emulated error */ + +/* cases of missing or invalid descriptors */ +#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \ + MMU060_IL | MMU060_PF) +/* bits that indicate real errors */ +#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \ + MMU060_WP | MMU060_TWE | MMU060_RE | MMU060_WE) + +/* structure for stack frames */ + +struct frame { + struct pt_regs ptregs; + union { + struct { + unsigned long iaddr; /* instruction address */ + } fmt2; + struct { + unsigned long effaddr; /* effective address */ + } fmt3; + struct { + unsigned long effaddr; /* effective address */ + unsigned long pc; /* pc of faulted instr */ + } fmt4; + struct { + unsigned long effaddr; /* effective address */ + unsigned short ssw; /* special status word */ + unsigned short wb3s; /* write back 3 status */ + unsigned short wb2s; /* write back 2 status */ + unsigned short wb1s; /* write back 1 status */ + unsigned long faddr; /* fault address */ + unsigned long wb3a; /* write back 3 address */ + unsigned long wb3d; /* write back 3 data */ + unsigned long wb2a; /* write back 2 address */ + unsigned long wb2d; /* write back 2 data */ + unsigned long wb1a; /* write back 1 address */ + unsigned long wb1dpd0; /* write back 1 data/push data 0*/ + unsigned long pd1; /* push data 1*/ + unsigned long pd2; /* push data 2*/ + unsigned long pd3; /* push data 3*/ + } fmt7; + struct { + unsigned long iaddr; /* instruction address */ + unsigned short int1[4]; /* internal registers */ + } fmt9; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[2]; + } fmta; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[4]; + unsigned long baddr; /* stage B address */ + unsigned short int4[2]; + unsigned long dibuf; /* data cycle input buffer */ + unsigned short int5[3]; + unsigned ver : 4; /* stack frame version # */ + unsigned int6:12; + unsigned short int7[18]; + } fmtb; + } un; +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68K_TRAPS_H */ diff --git a/arch/m68k/include/asm/traps_no.h b/arch/m68k/include/asm/traps_no.h new file mode 100644 index 0000000..d0671e5 --- /dev/null +++ b/arch/m68k/include/asm/traps_no.h @@ -0,0 +1,154 @@ +/* + * linux/include/asm/traps.h + * + * Copyright (C) 1993 Hamish Macdonald + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _M68KNOMMU_TRAPS_H +#define _M68KNOMMU_TRAPS_H + +#ifndef __ASSEMBLY__ + +typedef void (*e_vector)(void); + +extern e_vector vectors[]; +extern void init_vectors(void); +extern void enable_vector(unsigned int irq); +extern void disable_vector(unsigned int irq); +extern void ack_vector(unsigned int irq); + +#endif + +#define VEC_BUSERR (2) +#define VEC_ADDRERR (3) +#define VEC_ILLEGAL (4) +#define VEC_ZERODIV (5) +#define VEC_CHK (6) +#define VEC_TRAP (7) +#define VEC_PRIV (8) +#define VEC_TRACE (9) +#define VEC_LINE10 (10) +#define VEC_LINE11 (11) +#define VEC_RESV1 (12) +#define VEC_COPROC (13) +#define VEC_FORMAT (14) +#define VEC_UNINT (15) +#define VEC_SPUR (24) +#define VEC_INT1 (25) +#define VEC_INT2 (26) +#define VEC_INT3 (27) +#define VEC_INT4 (28) +#define VEC_INT5 (29) +#define VEC_INT6 (30) +#define VEC_INT7 (31) +#define VEC_SYS (32) +#define VEC_TRAP1 (33) +#define VEC_TRAP2 (34) +#define VEC_TRAP3 (35) +#define VEC_TRAP4 (36) +#define VEC_TRAP5 (37) +#define VEC_TRAP6 (38) +#define VEC_TRAP7 (39) +#define VEC_TRAP8 (40) +#define VEC_TRAP9 (41) +#define VEC_TRAP10 (42) +#define VEC_TRAP11 (43) +#define VEC_TRAP12 (44) +#define VEC_TRAP13 (45) +#define VEC_TRAP14 (46) +#define VEC_TRAP15 (47) +#define VEC_FPBRUC (48) +#define VEC_FPIR (49) +#define VEC_FPDIVZ (50) +#define VEC_FPUNDER (51) +#define VEC_FPOE (52) +#define VEC_FPOVER (53) +#define VEC_FPNAN (54) +#define VEC_FPUNSUP (55) +#define VEC_UNIMPEA (60) +#define VEC_UNIMPII (61) +#define VEC_USER (64) + +#define VECOFF(vec) ((vec)<<2) + +#ifndef __ASSEMBLY__ + +/* Status register bits */ +#define PS_T (0x8000) +#define PS_S (0x2000) +#define PS_M (0x1000) +#define PS_C (0x0001) + +/* structure for stack frames */ + +struct frame { + struct pt_regs ptregs; + union { + struct { + unsigned long iaddr; /* instruction address */ + } fmt2; + struct { + unsigned long effaddr; /* effective address */ + } fmt3; + struct { + unsigned long effaddr; /* effective address */ + unsigned long pc; /* pc of faulted instr */ + } fmt4; + struct { + unsigned long effaddr; /* effective address */ + unsigned short ssw; /* special status word */ + unsigned short wb3s; /* write back 3 status */ + unsigned short wb2s; /* write back 2 status */ + unsigned short wb1s; /* write back 1 status */ + unsigned long faddr; /* fault address */ + unsigned long wb3a; /* write back 3 address */ + unsigned long wb3d; /* write back 3 data */ + unsigned long wb2a; /* write back 2 address */ + unsigned long wb2d; /* write back 2 data */ + unsigned long wb1a; /* write back 1 address */ + unsigned long wb1dpd0; /* write back 1 data/push data 0*/ + unsigned long pd1; /* push data 1*/ + unsigned long pd2; /* push data 2*/ + unsigned long pd3; /* push data 3*/ + } fmt7; + struct { + unsigned long iaddr; /* instruction address */ + unsigned short int1[4]; /* internal registers */ + } fmt9; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[2]; + } fmta; + struct { + unsigned short int1; + unsigned short ssw; /* special status word */ + unsigned short isc; /* instruction stage c */ + unsigned short isb; /* instruction stage b */ + unsigned long daddr; /* data cycle fault address */ + unsigned short int2[2]; + unsigned long dobuf; /* data cycle output buffer */ + unsigned short int3[4]; + unsigned long baddr; /* stage B address */ + unsigned short int4[2]; + unsigned long dibuf; /* data cycle input buffer */ + unsigned short int5[3]; + unsigned ver : 4; /* stack frame version # */ + unsigned int6:12; + unsigned short int7[18]; + } fmtb; + } un; +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* _M68KNOMMU_TRAPS_H */ diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h new file mode 100644 index 0000000..6441cb5 --- /dev/null +++ b/arch/m68k/include/asm/types.h @@ -0,0 +1,37 @@ +#ifndef _M68K_TYPES_H +#define _M68K_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ +#include + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* DMA addresses are always 32-bits wide */ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _M68K_TYPES_H */ diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h new file mode 100644 index 0000000..38f92db --- /dev/null +++ b/arch/m68k/include/asm/uaccess.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "uaccess_no.h" +#else +#include "uaccess_mm.h" +#endif diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h new file mode 100644 index 0000000..7107f3fb --- /dev/null +++ b/arch/m68k/include/asm/uaccess_mm.h @@ -0,0 +1,374 @@ +#ifndef __M68K_UACCESS_H +#define __M68K_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* We let the MMU do all checking */ +static inline int access_ok(int type, const void __user *addr, + unsigned long size) +{ + return 1; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int __put_user_bad(void); +extern int __get_user_bad(void); + +#define __put_user_asm(res, x, ptr, bwl, reg, err) \ +asm volatile ("\n" \ + "1: moves."#bwl" %2,%1\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: moveq.l %3,%0\n" \ + " jra 2b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .previous" \ + : "+d" (res), "=m" (*(ptr)) \ + : #reg (x), "i" (err)) + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define __put_user(x, ptr) \ +({ \ + typeof(*(ptr)) __pu_val = (x); \ + int __pu_err = 0; \ + __chk_user_ptr(ptr); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ + break; \ + case 8: \ + { \ + const void __user *__pu_ptr = (ptr); \ + asm volatile ("\n" \ + "1: moves.l %2,(%1)+\n" \ + "2: moves.l %R2,(%1)\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: movel %3,%0\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .long 3b,10b\n" \ + " .previous" \ + : "+d" (__pu_err), "+a" (__pu_ptr) \ + : "r" (__pu_val), "i" (-EFAULT) \ + : "memory"); \ + break; \ + } \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +#define put_user(x, ptr) __put_user(x, ptr) + + +#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ + type __gu_val; \ + asm volatile ("\n" \ + "1: moves."#bwl" %2,%1\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: move.l %3,%0\n" \ + " sub."#bwl" %1,%1\n" \ + " jra 2b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .previous" \ + : "+d" (res), "=&" #reg (__gu_val) \ + : "m" (*(ptr)), "i" (err)); \ + (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \ +}) + +#define __get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + __chk_user_ptr(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ + break; \ + case 2: \ + __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \ + break; \ + case 4: \ + __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ + break; \ +/* case 8: disabled because gcc-4.1 has a broken typeof \ + { \ + const void *__gu_ptr = (ptr); \ + u64 __gu_val; \ + asm volatile ("\n" \ + "1: moves.l (%2)+,%1\n" \ + "2: moves.l (%2),%R1\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: move.l %3,%0\n" \ + " sub.l %1,%1\n" \ + " sub.l %R1,%R1\n" \ + " jra 3b\n" \ + " .previous\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10b\n" \ + " .long 2b,10b\n" \ + " .previous" \ + : "+d" (__gu_err), "=&r" (__gu_val), \ + "+a" (__gu_ptr) \ + : "i" (-EFAULT) \ + : "memory"); \ + (x) = (typeof(*(ptr)))__gu_val; \ + break; \ + } */ \ + default: \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + __gu_err; \ +}) +#define get_user(x, ptr) __get_user(x, ptr) + +unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n); +unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n); + +#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ + asm volatile ("\n" \ + "1: moves."#s1" (%2)+,%3\n" \ + " move."#s1" %3,(%1)+\n" \ + "2: moves."#s2" (%2)+,%3\n" \ + " move."#s2" %3,(%1)+\n" \ + " .ifnc \""#s3"\",\"\"\n" \ + "3: moves."#s3" (%2)+,%3\n" \ + " move."#s3" %3,(%1)+\n" \ + " .endif\n" \ + "4:\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b,10f\n" \ + " .long 2b,20f\n" \ + " .ifnc \""#s3"\",\"\"\n" \ + " .long 3b,30f\n" \ + " .endif\n" \ + " .previous\n" \ + "\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "10: clr."#s1" (%1)+\n" \ + "20: clr."#s2" (%1)+\n" \ + " .ifnc \""#s3"\",\"\"\n" \ + "30: clr."#s3" (%1)+\n" \ + " .endif\n" \ + " moveq.l #"#n",%0\n" \ + " jra 4b\n" \ + " .previous\n" \ + : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \ + : : "memory") + +static __always_inline unsigned long +__constant_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long res = 0, tmp; + + switch (n) { + case 1: + __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1); + break; + case 2: + __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2); + break; + case 3: + __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,); + break; + case 4: + __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4); + break; + case 5: + __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,); + break; + case 6: + __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,); + break; + case 7: + __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b); + break; + case 8: + __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,); + break; + case 9: + __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b); + break; + case 10: + __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w); + break; + case 12: + __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l); + break; + default: + /* we limit the inlined version to 3 moves */ + return __generic_copy_from_user(to, from, n); + } + + return res; +} + +#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ + asm volatile ("\n" \ + " move."#s1" (%2)+,%3\n" \ + "11: moves."#s1" %3,(%1)+\n" \ + "12: move."#s2" (%2)+,%3\n" \ + "21: moves."#s2" %3,(%1)+\n" \ + "22:\n" \ + " .ifnc \""#s3"\",\"\"\n" \ + " move."#s3" (%2)+,%3\n" \ + "31: moves."#s3" %3,(%1)+\n" \ + "32:\n" \ + " .endif\n" \ + "4:\n" \ + "\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 11b,5f\n" \ + " .long 12b,5f\n" \ + " .long 21b,5f\n" \ + " .long 22b,5f\n" \ + " .ifnc \""#s3"\",\"\"\n" \ + " .long 31b,5f\n" \ + " .long 32b,5f\n" \ + " .endif\n" \ + " .previous\n" \ + "\n" \ + " .section .fixup,\"ax\"\n" \ + " .even\n" \ + "5: moveq.l #"#n",%0\n" \ + " jra 4b\n" \ + " .previous\n" \ + : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \ + : : "memory") + +static __always_inline unsigned long +__constant_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long res = 0, tmp; + + switch (n) { + case 1: + __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); + break; + case 2: + __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2); + break; + case 3: + __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); + break; + case 4: + __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); + break; + case 5: + __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); + break; + case 6: + __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,); + break; + case 7: + __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b); + break; + case 8: + __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,); + break; + case 9: + __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b); + break; + case 10: + __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w); + break; + case 12: + __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l); + break; + default: + /* limit the inlined version to 3 moves */ + return __generic_copy_to_user(to, from, n); + } + + return res; +} + +#define __copy_from_user(to, from, n) \ +(__builtin_constant_p(n) ? \ + __constant_copy_from_user(to, from, n) : \ + __generic_copy_from_user(to, from, n)) + +#define __copy_to_user(to, from, n) \ +(__builtin_constant_p(n) ? \ + __constant_copy_to_user(to, from, n) : \ + __generic_copy_to_user(to, from, n)) + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_from_user(to, from, n) __copy_from_user(to, from, n) +#define copy_to_user(to, from, n) __copy_to_user(to, from, n) + +long strncpy_from_user(char *dst, const char __user *src, long count); +long strnlen_user(const char __user *src, long n); +unsigned long __clear_user(void __user *to, unsigned long n); + +#define clear_user __clear_user + +#define strlen_user(str) strnlen_user(str, 32767) + +#endif /* _M68K_UACCESS_H */ diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h new file mode 100644 index 0000000..68bbe9b --- /dev/null +++ b/arch/m68k/include/asm/uaccess_no.h @@ -0,0 +1,181 @@ +#ifndef __M68KNOMMU_UACCESS_H +#define __M68KNOMMU_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include + +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) + +/* + * It is not enough to just have access_ok check for a real RAM address. + * This would disallow the case of code/ro-data running XIP in flash/rom. + * Ideally we would check the possible flash ranges too, but that is + * currently not so easy. + */ +static inline int _access_ok(unsigned long addr, unsigned long size) +{ + return 1; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + typeof(*(ptr)) __pu_val = (x); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, b); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, w); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, l); \ + break; \ + case 8: \ + memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +#define __put_user(x, ptr) put_user(x, ptr) + +extern int __put_user_bad(void); + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(err,x,ptr,bwl) \ + __asm__ ("move" #bwl " %0,%1" \ + : /* no outputs */ \ + :"d" (x),"m" (*__ptr(ptr)) : "memory") + +#define get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + typeof(x) __gu_val = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ + break; \ + case 2: \ + __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ + break; \ + case 4: \ + __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ + break; \ + case 8: \ + memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ + break; \ + default: \ + __gu_val = 0; \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + (x) = (typeof(*(ptr))) __gu_val; \ + __gu_err; \ +}) +#define __get_user(x, ptr) get_user(x, ptr) + +extern int __get_user_bad(void); + +#define __get_user_asm(err,x,ptr,bwl,reg) \ + __asm__ ("move" #bwl " %1,%0" \ + : "=d" (x) \ + : "m" (*__ptr(ptr))) + +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) + +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long +strncpy_from_user(char *dst, const char *src, long count) +{ + char *tmp; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) + ; + return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return(strlen(src) + 1); /* DAVIDM make safer */ +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long +__clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +#define clear_user(to,n) __clear_user(to,n) + +#endif /* _M68KNOMMU_UACCESS_H */ diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h new file mode 100644 index 0000000..b53cd16 --- /dev/null +++ b/arch/m68k/include/asm/ucontext.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "ucontext_no.h" +#else +#include "ucontext_mm.h" +#endif diff --git a/arch/m68k/include/asm/ucontext_mm.h b/arch/m68k/include/asm/ucontext_mm.h new file mode 100644 index 0000000..e4e2266 --- /dev/null +++ b/arch/m68k/include/asm/ucontext_mm.h @@ -0,0 +1,30 @@ +#ifndef _M68K_UCONTEXT_H +#define _M68K_UCONTEXT_H + +typedef int greg_t; +#define NGREG 18 +typedef greg_t gregset_t[NGREG]; + +typedef struct fpregset { + int f_fpcntl[3]; + int f_fpregs[8*3]; +} fpregset_t; + +struct mcontext { + int version; + gregset_t gregs; + fpregset_t fpregs; +}; + +#define MCONTEXT_VERSION 2 + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct mcontext uc_mcontext; + unsigned long uc_filler[80]; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/m68k/include/asm/ucontext_no.h b/arch/m68k/include/asm/ucontext_no.h new file mode 100644 index 0000000..713a27f --- /dev/null +++ b/arch/m68k/include/asm/ucontext_no.h @@ -0,0 +1,32 @@ +#ifndef _M68KNOMMU_UCONTEXT_H +#define _M68KNOMMU_UCONTEXT_H + +typedef int greg_t; +#define NGREG 18 +typedef greg_t gregset_t[NGREG]; + +typedef struct fpregset { + int f_pcr; + int f_psr; + int f_fpiaddr; + int f_fpregs[8][3]; +} fpregset_t; + +struct mcontext { + int version; + gregset_t gregs; + fpregset_t fpregs; +}; + +#define MCONTEXT_VERSION 2 + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct mcontext uc_mcontext; + unsigned long uc_filler[80]; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h new file mode 100644 index 0000000..c640bba --- /dev/null +++ b/arch/m68k/include/asm/unaligned.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "unaligned_no.h" +#else +#include "unaligned_mm.h" +#endif diff --git a/arch/m68k/include/asm/unaligned_mm.h b/arch/m68k/include/asm/unaligned_mm.h new file mode 100644 index 0000000..77698f2 --- /dev/null +++ b/arch/m68k/include/asm/unaligned_mm.h @@ -0,0 +1,13 @@ +#ifndef _ASM_M68K_UNALIGNED_H +#define _ASM_M68K_UNALIGNED_H + +/* + * The m68k can do unaligned accesses itself. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_M68K_UNALIGNED_H */ diff --git a/arch/m68k/include/asm/unaligned_no.h b/arch/m68k/include/asm/unaligned_no.h new file mode 100644 index 0000000..eb1ea4c --- /dev/null +++ b/arch/m68k/include/asm/unaligned_no.h @@ -0,0 +1,25 @@ +#ifndef _ASM_M68KNOMMU_UNALIGNED_H +#define _ASM_M68KNOMMU_UNALIGNED_H + + +#ifdef CONFIG_COLDFIRE +#include +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#else +/* + * The m68k can do unaligned accesses itself. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif + +#endif /* _ASM_M68KNOMMU_UNALIGNED_H */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h new file mode 100644 index 0000000..df1d9d4 --- /dev/null +++ b/arch/m68k/include/asm/unistd.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "unistd_no.h" +#else +#include "unistd_mm.h" +#endif diff --git a/arch/m68k/include/asm/unistd_mm.h b/arch/m68k/include/asm/unistd_mm.h new file mode 100644 index 0000000..965abb8 --- /dev/null +++ b/arch/m68k/include/asm/unistd_mm.h @@ -0,0 +1,374 @@ +#ifndef _ASM_M68K_UNISTD_H_ +#define _ASM_M68K_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +#define __NR_idle /* 112 */ Obsolete +#define __NR_vm86 /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +#define __NR_vserver 278 +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 + +#ifdef __KERNEL__ + +#define NR_syscalls 329 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* whitelist for checksyscalls */ +#define __IGNORE_restart_syscall + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/include/asm/unistd_no.h b/arch/m68k/include/asm/unistd_no.h new file mode 100644 index 0000000..b034a2f --- /dev/null +++ b/arch/m68k/include/asm/unistd_no.h @@ -0,0 +1,372 @@ +#ifndef _ASM_M68K_UNISTD_H_ +#define _ASM_M68K_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +#define __NR_idle /* 112 */ Obsolete +#define __NR_vm86 /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +#define __NR_vserver 278 +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 + +#ifdef __KERNEL__ + +#define NR_syscalls 329 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/include/asm/user.h b/arch/m68k/include/asm/user.h new file mode 100644 index 0000000..f1f478d --- /dev/null +++ b/arch/m68k/include/asm/user.h @@ -0,0 +1,86 @@ +#ifndef _M68K_USER_H +#define _M68K_USER_H + +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + +struct user_m68kfp_struct { + unsigned long fpregs[8*3]; /* fp0-fp7 registers */ + unsigned long fpcntl[3]; /* fp control regs */ +}; + +/* This is the old layout of "struct pt_regs" as of Linux 1.x, and + is still the layout used by user (the new pt_regs doesn't have + all registers). */ +struct user_regs_struct { + long d1,d2,d3,d4,d5,d6,d7; + long a0,a1,a2,a3,a4,a5,a6; + long d0; + long usp; + long orig_d0; + short stkadj; + short sr; + long pc; + short fmtvec; + short __fill; +}; + + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user{ +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct user_regs_struct regs; /* Where the registers are actually stored */ +/* ptrace does not yet supply these. Someday.... */ + int u_fpvalid; /* True if math co-processor being used. */ + /* for this mess. Not yet used. */ + struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + unsigned long u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#define NBPG 4096 +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h new file mode 100644 index 0000000..22ab05c --- /dev/null +++ b/arch/m68k/include/asm/virtconvert.h @@ -0,0 +1,48 @@ +#ifndef __VIRT_CONVERT__ +#define __VIRT_CONVERT__ + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +/* + * Change virtual addresses to physical addresses and vv. + */ +static inline unsigned long virt_to_phys(void *address) +{ + return __pa(address); +} + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* Permanent address of a page. */ +#ifdef CONFIG_SINGLE_MEMORY_CHUNK +#define page_to_phys(page) \ + __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT)) +#else +#define page_to_phys(_page) ({ \ + struct page *__page = _page; \ + struct pglist_data *pgdat; \ + pgdat = pg_data_table[page_to_nid(__page)]; \ + page_to_pfn(__page) << PAGE_SHIFT; \ +}) +#endif + +/* + * IO bus memory addresses are 1:1 with the physical address, + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif +#endif diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h new file mode 100644 index 0000000..c82eb12 --- /dev/null +++ b/arch/m68k/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/m68k/include/asm/zorro.h b/arch/m68k/include/asm/zorro.h new file mode 100644 index 0000000..5ce97c2 --- /dev/null +++ b/arch/m68k/include/asm/zorro.h @@ -0,0 +1,45 @@ +#ifndef _ASM_M68K_ZORRO_H +#define _ASM_M68K_ZORRO_H + +#include + +#define z_readb raw_inb +#define z_readw raw_inw +#define z_readl raw_inl + +#define z_writeb raw_outb +#define z_writew raw_outw +#define z_writel raw_outl + +#define z_memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); +} + +static inline void __iomem *z_remap_writethrough(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void __iomem *z_remap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +#define z_unmap iounmap +#define z_iounmap iounmap +#define z_ioremap z_remap_nocache_ser + +#endif /* _ASM_M68K_ZORRO_H */ diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild deleted file mode 100644 index 58c02a4..0000000 --- a/arch/m68knommu/include/asm/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -unifdef-y += swab.h diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h deleted file mode 100644 index a337e56..0000000 --- a/arch/m68knommu/include/asm/MC68328.h +++ /dev/null @@ -1,1266 +0,0 @@ - -/* include/asm-m68knommu/MC68328.h: '328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68328_H_ -#define _MC68328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Mask Revision Register - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * Group Base Address Registers - */ -#define GRPBASEA_ADDR 0xfffff100 -#define GRPBASEB_ADDR 0xfffff102 -#define GRPBASEC_ADDR 0xfffff104 -#define GRPBASED_ADDR 0xfffff106 - -#define GRPBASEA WORD_REF(GRPBASEA_ADDR) -#define GRPBASEB WORD_REF(GRPBASEB_ADDR) -#define GRPBASEC WORD_REF(GRPBASEC_ADDR) -#define GRPBASED WORD_REF(GRPBASED_ADDR) - -#define GRPBASE_V 0x0001 /* Valid */ -#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ - -/* - * Group Base Address Mask Registers - */ -#define GRPMASKA_ADDR 0xfffff108 -#define GRPMASKB_ADDR 0xfffff10a -#define GRPMASKC_ADDR 0xfffff10c -#define GRPMASKD_ADDR 0xfffff10e - -#define GRPMASKA WORD_REF(GRPMASKA_ADDR) -#define GRPMASKB WORD_REF(GRPMASKB_ADDR) -#define GRPMASKC WORD_REF(GRPMASKC_ADDR) -#define GRPMASKD WORD_REF(GRPMASKD_ADDR) - -#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ - -/* - * Chip-Select Option Registers (group A) - */ -#define CSA0_ADDR 0xfffff110 -#define CSA1_ADDR 0xfffff114 -#define CSA2_ADDR 0xfffff118 -#define CSA3_ADDR 0xfffff11c - -#define CSA0 LONG_REF(CSA0_ADDR) -#define CSA1 LONG_REF(CSA1_ADDR) -#define CSA2 LONG_REF(CSA2_ADDR) -#define CSA3 LONG_REF(CSA3_ADDR) - -#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSA_WAIT_SHIFT 0 -#define CSA_RO 0x00000008 /* Read-Only */ -#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSA_AM_SHIFT 8 -#define CSA_BUSW 0x00010000 /* Bus Width Select */ -#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSA_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group B) - */ -#define CSB0_ADDR 0xfffff120 -#define CSB1_ADDR 0xfffff124 -#define CSB2_ADDR 0xfffff128 -#define CSB3_ADDR 0xfffff12c - -#define CSB0 LONG_REF(CSB0_ADDR) -#define CSB1 LONG_REF(CSB1_ADDR) -#define CSB2 LONG_REF(CSB2_ADDR) -#define CSB3 LONG_REF(CSB3_ADDR) - -#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSB_WAIT_SHIFT 0 -#define CSB_RO 0x00000008 /* Read-Only */ -#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSB_AM_SHIFT 8 -#define CSB_BUSW 0x00010000 /* Bus Width Select */ -#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSB_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group C) - */ -#define CSC0_ADDR 0xfffff130 -#define CSC1_ADDR 0xfffff134 -#define CSC2_ADDR 0xfffff138 -#define CSC3_ADDR 0xfffff13c - -#define CSC0 LONG_REF(CSC0_ADDR) -#define CSC1 LONG_REF(CSC1_ADDR) -#define CSC2 LONG_REF(CSC2_ADDR) -#define CSC3 LONG_REF(CSC3_ADDR) - -#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSC_WAIT_SHIFT 0 -#define CSC_RO 0x00000008 /* Read-Only */ -#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSC_AM_SHIFT 4 -#define CSC_BUSW 0x00010000 /* Bus Width Select */ -#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSC_AC_SHIFT 20 - -/* - * Chip-Select Option Registers (group D) - */ -#define CSD0_ADDR 0xfffff140 -#define CSD1_ADDR 0xfffff144 -#define CSD2_ADDR 0xfffff148 -#define CSD3_ADDR 0xfffff14c - -#define CSD0 LONG_REF(CSD0_ADDR) -#define CSD1 LONG_REF(CSD1_ADDR) -#define CSD2 LONG_REF(CSD2_ADDR) -#define CSD3 LONG_REF(CSD3_ADDR) - -#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSD_WAIT_SHIFT 0 -#define CSD_RO 0x00000008 /* Read-Only */ -#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSD_AM_SHIFT 4 -#define CSD_BUSW 0x00010000 /* Bus Width Select */ -#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSD_AC_SHIFT 20 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_PIXCLK_SEL_SHIFT 11 - -/* 'EZ328-compatible definitions */ -#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK -#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADRR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ -#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define INT4_IRQ_NUM 12 /* External INT4 */ -#define INT5_IRQ_NUM 13 /* External INT5 */ -#define INT6_IRQ_NUM 14 /* External INT6 */ -#define INT7_IRQ_NUM 15 /* External INT7 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define PEN_IRQ_NUM 20 /* Pen Interrupt */ -#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ -#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ -#define IRQ7_IRQ_NUM 23 /* IRQ7 */ - -/* '328-compatible definitions */ -#define SPI_IRQ_NUM SPIM_IRQ_NUM -#define TMR_IRQ_NUM TMR1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ -#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ -#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ -#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ -#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ -#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ -#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ -#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IMR_MSPI IMR_MSPIM -#define IMR_MTMR IMR_MTMR1 - -/* - * Interrupt Wake-Up Enable Register - */ -#define IWR_ADDR 0xfffff308 -#define IWR LONG_REF(IWR_ADDR) - -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define ISR_SPI ISR_SPIM -#define ISR_TMR ISR_TMR1 - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff310 -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IPR_SPI IPR_SPIM -#define IPR_TMR IPR_TMR1 - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PASEL_ADDR 0xfffff403 /* Port A Select register */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PASEL BYTE_REF(PASEL_ADDR) - -#define PA(x) (1 << (x)) -#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ - -#define PA_A16 PA(0) /* Use A16 as PA(0) */ -#define PA_A17 PA(1) /* Use A17 as PA(1) */ -#define PA_A18 PA(2) /* Use A18 as PA(2) */ -#define PA_A19 PA(3) /* Use A19 as PA(3) */ -#define PA_A20 PA(4) /* Use A20 as PA(4) */ -#define PA_A21 PA(5) /* Use A21 as PA(5) */ -#define PA_A22 PA(6) /* Use A22 as PA(6) */ -#define PA_A23 PA(7) /* Use A23 as PA(7) */ - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) -#define PB_D(x) PB(x) /* This is specific to port B only */ - -#define PB_D0 PB(0) /* Use D0 as PB(0) */ -#define PB_D1 PB(1) /* Use D1 as PB(1) */ -#define PB_D2 PB(2) /* Use D2 as PB(2) */ -#define PB_D3 PB(3) /* Use D3 as PB(3) */ -#define PB_D4 PB(4) /* Use D4 as PB(4) */ -#define PB_D5 PB(5) /* Use D5 as PB(5) */ -#define PB_D6 PB(6) /* Use D6 as PB(6) */ -#define PB_D7 PB(7) /* Use D7 as PB(7) */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_WE PC(6) /* Use WE as PC(6) */ -#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ -#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ -#define PC_LDS PC(2) /* Use LDS as PC(2) */ -#define PC_UDS PC(1) /* Use UDS as PC(1) */ -#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) -#define PD_KB(x) PD(x) /* This is specific for Port D only */ - -#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ -#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ -#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ -#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ -#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ -#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ -#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ -#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ -#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ -#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ -#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ -#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ -#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ -#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) -#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ - -#define PF_A24 PF(0) /* Use A24 as PF(0) */ -#define PF_A25 PF(1) /* Use A25 as PF(1) */ -#define PF_A26 PF(2) /* Use A26 as PF(2) */ -#define PF_A27 PF(3) /* Use A27 as PF(3) */ -#define PF_A28 PF(4) /* Use A28 as PF(4) */ -#define PF_A29 PF(5) /* Use A29 as PF(5) */ -#define PF_A30 PF(6) /* Use A30 as PF(6) */ -#define PF_A31 PF(7) /* Use A31 as PF(7) */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ -#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ -#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ -#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ -#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ -#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ -#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ -#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff439 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_PWMEN 0x0010 /* Enable PWM */ -#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ -#define PWMC_PIN 0x0080 /* Current PWM output pin status */ -#define PWMC_LOAD 0x0100 /* Force a new period */ -#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* 'EZ328-compatible definitions */ -#define PWMC_EN PWMC_PWMEN - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff502 -#define PWMP WORD_REF(PWMP_ADDR) - -/* - * PWM Width Register - */ -#define PWMW_ADDR 0xfffff504 -#define PWMW WORD_REF(PWMW_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff506 -#define PWMCNT WORD_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timers - * - **********/ - -/* - * Timer Unit 1 and 2 Control Registers - */ -#define TCTL1_ADDR 0xfffff600 -#define TCTL1 WORD_REF(TCTL1_ADDR) -#define TCTL2_ADDR 0xfffff60c -#define TCTL2 WORD_REF(TCTL2_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* 'EZ328-compatible definitions */ -#define TCTL_ADDR TCTL1_ADDR -#define TCTL TCTL1 - -/* - * Timer Unit 1 and 2 Prescaler Registers - */ -#define TPRER1_ADDR 0xfffff602 -#define TPRER1 WORD_REF(TPRER1_ADDR) -#define TPRER2_ADDR 0xfffff60e -#define TPRER2 WORD_REF(TPRER2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TPRER_ADDR TPRER1_ADDR -#define TPRER TPRER1 - -/* - * Timer Unit 1 and 2 Compare Registers - */ -#define TCMP1_ADDR 0xfffff604 -#define TCMP1 WORD_REF(TCMP1_ADDR) -#define TCMP2_ADDR 0xfffff610 -#define TCMP2 WORD_REF(TCMP2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCMP_ADDR TCMP1_ADDR -#define TCMP TCMP1 - -/* - * Timer Unit 1 and 2 Capture Registers - */ -#define TCR1_ADDR 0xfffff606 -#define TCR1 WORD_REF(TCR1_ADDR) -#define TCR2_ADDR 0xfffff612 -#define TCR2 WORD_REF(TCR2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCR_ADDR TCR1_ADDR -#define TCR TCR1 - -/* - * Timer Unit 1 and 2 Counter Registers - */ -#define TCN1_ADDR 0xfffff608 -#define TCN1 WORD_REF(TCN1_ADDR) -#define TCN2_ADDR 0xfffff614 -#define TCN2 WORD_REF(TCN2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCN_ADDR TCN1_ADDR -#define TCN TCN - -/* - * Timer Unit 1 and 2 Status Registers - */ -#define TSTAT1_ADDR 0xfffff60a -#define TSTAT1 WORD_REF(TSTAT1_ADDR) -#define TSTAT2_ADDR 0xfffff616 -#define TSTAT2 WORD_REF(TSTAT2_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* 'EZ328-compatible definitions */ -#define TSTAT_ADDR TSTAT1_ADDR -#define TSTAT TSTAT1 - -/* - * Watchdog Compare Register - */ -#define WRR_ADDR 0xfffff61a -#define WRR WORD_REF(WRR_ADDR) - -/* - * Watchdog Counter Register - */ -#define WCN_ADDR 0xfffff61c -#define WCN WORD_REF(WCN_ADDR) - -/* - * Watchdog Control and Status Register - */ -#define WCSR_ADDR 0xfffff618 -#define WCSR WORD_REF(WCSR_ADDR) - -#define WCSR_WDEN 0x0001 /* Watchdog Enable */ -#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ -#define WCSR_WRST 0x0004 /* Watchdog Reset */ - -/********** - * - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) - * - **********/ - -/* - * SPI Slave Register - */ -#define SPISR_ADDR 0xfffff700 -#define SPISR WORD_REF(SPISR_ADDR) - -#define SPISR_DATA_ADDR 0xfffff701 -#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) - -#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ -#define SPISR_DATA_SHIFT 0 -#define SPISR_SPISEN 0x0100 /* SPIS module enable */ -#define SPISR_POL 0x0200 /* SPSCLK polarity control */ -#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ -#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ -#define SPISR_DATARDY 0x1000 /* Data ready */ -#define SPISR_ENPOL 0x2000 /* Enable Polarity */ -#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ -#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* 'EZ328-compatible definitions */ -#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ -#define SPIMCONT_ENABLE SPIMCONT_SPIMEN -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ -#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ -#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ -#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ -#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ -#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UARTEN 0x8000 /* UART Enable */ - -/* 'EZ328-compatible definitions */ -#define USTCNT_TXAE USTCNT_TXAVAILEN -#define USTCNT_TXHE USTCNT_TXHALFEN -#define USTCNT_TXEE USTCNT_TXEMPTYEN -#define USTCNT_RXRE USTCNT_RXREADYEN -#define USTCNT_RXHE USTCNT_RXHALFEN -#define USTCNT_RXFE USTCNT_RXFULLEN -#define USTCNT_CTSD USTCNT_CTSDELTAEN -#define USTCNT_ODD USTCNT_ODD_EVEN -#define USTCNT_PEN USTCNT_PARITYEN -#define USTCNT_CLKM USTCNT_CLKMODE -#define USTCNT_UEN USTCNT_UARTEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ -#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ -#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ -#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STATUS 0x0200 /* CTS State */ -#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* 'EZ328-compatible definitions */ -#define UTX_CTS_STAT UTX_CTS_STATUS -#define UTX_NOCTS UTX_IGNORE_CTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int pad1; - volatile unsigned short int pad2; - volatile unsigned short int pad3; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with 'EZ328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x02 -#define LPICF_PBSIZ_4 0x04 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ -#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ -#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 2 -#define LCKCON_DMA16 0x40 /* DMA burst length */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* 'EZ328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Last Buffer Address Register - */ -#define LLBAR_ADDR 0xfffffa29 -#define LLBAR BYTE_REF(LLBAR_ADDR) - -#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ -#define LLBAR_LBAR_SHIFT 0 - -/* - * LCD Octet Terminal Count Register - */ -#define LOTCR_ADDR 0xfffffa2b -#define LOTCR BYTE_REF(LOTCR_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ -#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa32 -#define LGPMR WORD_REF(LGPMR_ADDR) - -#define LGPMR_GLEVEL3_MASK 0x000f -#define LGPMR_GLEVEL3_SHIFT 0 -#define LGPMR_GLEVEL2_MASK 0x00f0 -#define LGPMR_GLEVEL2_SHIFT 4 -#define LGPMR_GLEVEL0_MASK 0x0f00 -#define LGPMR_GLEVEL0_SHIFT 8 -#define LGPMR_GLEVEL1_MASK 0xf000 -#define LGPMR_GLEVEL1_SHIFT 12 - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_384 0x0020 /* Crystal Selection */ -#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ - -/* 'EZ328-compatible definitions */ -#define RTCCTL_XTL RTCCTL_384 -#define RTCCTL_EN RTCCTL_ENABLE - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -#endif /* _MC68328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02..0000000 --- a/arch/m68knommu/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h deleted file mode 100644 index 69b7f91..0000000 --- a/arch/m68knommu/include/asm/MC68EZ328.h +++ /dev/null @@ -1,1253 +0,0 @@ - -/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * The Silver Hammer Group, Ltd. - * - */ - -#ifndef _MC68EZ328_H_ -#define _MC68EZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI_IRQ_NUM 0 /* SPI interrupt */ -#define TMR_IRQ_NUM 1 /* Timer interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int pad1; - volatile unsigned short int pad2; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68EZ328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h deleted file mode 100644 index 2b9bf62..0000000 --- a/arch/m68knommu/include/asm/MC68VZ328.h +++ /dev/null @@ -1,1349 +0,0 @@ - -/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers - * - * Copyright (c) 2000-2001 Lineo Inc. - * Copyright (c) 2000-2001 Lineo Canada Corp. - * Copyright (C) 1999 Vladimir Gurevich - * Bare & Hare Software, Inc. - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski , - * The Silver Hammer Group, Ltd. - * - * M68VZ328 fixes by Evan Stawnyczy - * vz multiport fixes by Michael Leslie - */ - -#ifndef _MC68VZ328_H_ -#define _MC68VZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ -#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ -#define UART1_IRQ_NUM 2 /* UART 1 interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define UART2_IRQ_NUM 12 /* UART 2 interrupt */ -#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -#define SPI_IRQ_NUM SPI2_IRQ_NUM - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM -#define UART_IRQ_NUM UART1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ -#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ -#define PK_R_W 0x02 /* Use R/W as PK[1] */ -#define PK_LDS 0x04 /* Use /LDS as PK[2] */ -#define PK_UDS 0x08 /* Use /UDS as PK[3] */ -#define PK_LD4 0x10 /* Use LD4 as PK[4] */ -#define PK_LD5 0x20 /* Use LD5 as PK[5] */ -#define PK_LD6 0x40 /* Use LD6 as PK[6] */ -#define PK_LD7 0x80 /* Use LD7 as PK[7] */ - -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ -#define PJ_MISO 0x02 /* Use MISO as PJ[1] */ -#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ -#define PJ_SS 0x08 /* Use SS as PJ[3] */ -#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ -#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ -#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ -#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff449 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ -#define PM_SDCE 0x02 /* Use SDCE as PM[1] */ -#define PM_DQMH 0x04 /* Use DQMH as PM[2] */ -#define PM_DQML 0x08 /* Use DQML as PM[3] */ -#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ -#define PM_DMOE 0x20 /* Use DMOE as PM[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ - -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int hmark; - volatile unsigned short int unused; -} __attribute__((packed)) m68328_uart; - - - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH_ADDR) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68VZ328_H_ */ diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h deleted file mode 100644 index 871c0d5..0000000 --- a/arch/m68knommu/include/asm/anchor.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************/ - -/* - * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. - * - * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) - */ - -/****************************************************************************/ -#ifndef anchor_h -#define anchor_h -/****************************************************************************/ - -/* - * Define basic addressing info. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#else -#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#endif - -/****************************************************************************/ - -/* - * 4-byte registers of CO-MEM, so adjust register addresses for - * easy access. Handy macro for word access too. - */ -#define LREG(a) ((a) >> 2) -#define WREG(a) ((a) >> 1) - - -/* - * Define base addresses within CO-MEM Lite register address space. - */ -#define COMEM_I2O 0x0000 /* I2O registers */ -#define COMEM_OPREGS 0x0400 /* Operation registers */ -#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ -#define COMEM_SHMEM 0x4000 /* Shared memory region */ - -#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ - - -/* - * Define CO-MEM Registers. - */ -#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ -#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ -#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ -#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ -#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ -#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ -#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ -#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ - -#define COMEM_DAHBASE 0x0460 /* Direct access base address */ - -#define COMEM_NVCMD 0x04a0 /* I2C serial command */ -#define COMEM_NVREAD 0x04a4 /* I2C serial read */ -#define COMEM_NVSTAT 0x04a8 /* I2C status */ - -#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ -#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ -#define COMEM_DMASIZE 0x04b8 /* DMA size */ -#define COMEM_DMACTL 0x04bc /* DMA control */ - -#define COMEM_HCTL 0x04e0 /* Host control */ -#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ -#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ -#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ -#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ - -#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ - - -/* - * Commands and flags for use with Direct Access Register. - */ -#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ -#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ -#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ -#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ -#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ -#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ -#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ -#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ - -#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) - -#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) - - -/* - * The PCI bus will be limited in what slots will actually be used. - * Define valid device numbers for different boards. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ -#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ -#else -#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ -#endif - -#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ - - -/****************************************************************************/ -#endif /* anchor_h */ diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h deleted file mode 100644 index 6bb6748..0000000 --- a/arch/m68knommu/include/asm/atomic.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_ATOMIC__ -#define __ARCH_M68KNOMMU_ATOMIC__ - -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * We do not have SMP m68k systems, so we don't have to deal with that. - */ - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -static __inline__ void atomic_add(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ void atomic_sub(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ int atomic_sub_and_test(int i, atomic_t * v) -{ - char c; -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "d" (i)); -#else - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "di" (i)); -#endif - return c != 0; -} - -static __inline__ void atomic_inc(volatile atomic_t *v) -{ - __asm__ __volatile__("addql #1,%0" : "+m" (*v)); -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ - -static __inline__ int atomic_inc_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_dec(volatile atomic_t *v) -{ - __asm__ __volatile__("subql #1,%0" : "+m" (*v)); -} - -static __inline__ int atomic_dec_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); -} - -static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -#include -#endif /* __ARCH_M68KNOMMU_ATOMIC __ */ diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h deleted file mode 100644 index 844d6d5..0000000 --- a/arch/m68knommu/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h deleted file mode 100644 index 9d3cbe5..0000000 --- a/arch/m68knommu/include/asm/bitops.h +++ /dev/null @@ -1,337 +0,0 @@ -#ifndef _M68KNOMMU_BITOPS_H -#define _M68KNOMMU_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include -#include /* swab32 */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline int ffs(unsigned int val) -{ - if (!val) - return 0; - - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - val++; - return val; -} - -static inline int __ffs(unsigned int val) -{ - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#else -#include -#include -#endif - -#include -#include - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bset %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __set_bit(nr, addr) set_bit(nr, addr) - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -static __inline__ void clear_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __clear_bit(nr, addr) clear_bit(nr, addr) - -static __inline__ void change_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __change_bit(nr, addr) change_bit(nr, addr) - -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) - -/* - * This routine doesn't need to be atomic. - */ -static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include -#include -#include - -static __inline__ int ext2_set_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -static __inline__ int ext2_clear_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_set_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_set_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -#define ext2_clear_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_clear_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -static __inline__ int ext2_test_bit(int nr, const volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("btst %2,%1; sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); - unsigned long result = offset & ~31UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if(offset) { - /* We hold the little endian value in tmp, but then the - * shift is illegal. So we could keep a big endian value - * in tmp, like this: - * - * tmp = __swab32(*(p++)); - * tmp |= ~0UL >> (32-offset); - * - * but this would decrease performance, so we change the - * shift: - */ - tmp = *(p++); - tmp |= __swab32(~0UL >> (32-offset)); - if(size < 32) - goto found_first; - if(~tmp) - goto found_middle; - size -= 32; - result += 32; - } - while(size & ~31UL) { - if(~(tmp = *(p++))) - goto found_middle; - result += 32; - size -= 32; - } - if(!size) - return result; - tmp = *p; - -found_first: - /* tmp is little endian, so we would have to swab the shift, - * see above. But then we have to swab tmp below for ffz, so - * we might as well do this here. - */ - return result + ffz(__swab32(tmp) | (~0UL << size)); -found_middle: - return result + ffz(__swab32(tmp)); -} - -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) -#include - -#endif /* __KERNEL__ */ - -#include -#include -#include - -#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h deleted file mode 100644 index c12e526..0000000 --- a/arch/m68knommu/include/asm/bootinfo.h +++ /dev/null @@ -1,2 +0,0 @@ - -/* Nothing for m68knommu */ diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h deleted file mode 100644 index bdc1a4a..0000000 --- a/arch/m68knommu/include/asm/bootstd.h +++ /dev/null @@ -1,132 +0,0 @@ -/* bootstd.h: Bootloader system call interface - * - * (c) 1999, Rt-Control, Inc. - */ - -#ifndef __BOOTSTD_H__ -#define __BOOTSTD_H__ - -#define NR_BSC 21 /* last used bootloader system call */ - -#define __BN_reset 0 /* reset and start the bootloader */ -#define __BN_test 1 /* tests the system call interface */ -#define __BN_exec 2 /* executes a bootloader image */ -#define __BN_exit 3 /* terminates a bootloader image */ -#define __BN_program 4 /* program FLASH from a chain */ -#define __BN_erase 5 /* erase sector(s) of FLASH */ -#define __BN_open 6 -#define __BN_write 7 -#define __BN_read 8 -#define __BN_close 9 -#define __BN_mmap 10 /* map a file descriptor into memory */ -#define __BN_munmap 11 /* remove a file to memory mapping */ -#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */ -#define __BN_getserialnum 13 /* get the serial number of this board */ -#define __BN_getbenv 14 /* get a bootloader envvar */ -#define __BN_setbenv 15 /* get a bootloader envvar */ -#define __BN_setpmask 16 /* set the protection mask */ -#define __BN_readenv 17 /* read environment variables */ -#define __BN_flash_chattr_range 18 -#define __BN_flash_erase_range 19 -#define __BN_flash_write_range 20 - -/* Calling conventions compatible to (uC)linux/68k - * We use simmilar macros to call into the bootloader as for uClinux - */ - -#define __bsc_return(type, res) \ -do { \ - if ((unsigned long)(res) >= (unsigned long)(-64)) { \ - /* let errno be a function, preserve res in %d0 */ \ - int __err = -(res); \ - errno = __err; \ - res = -1; \ - } \ - return (type)(res); \ -} while (0) - -#define _bsc0(type,name) \ -type name(void) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc1(type,name,atype,a) \ -type name(atype a) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc2(type,name,atype,a,btype,b) \ -type name(atype a, btype b) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc3(type,name,atype,a,btype,b,ctype,c) \ -type name(atype a, btype b, ctype c) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ -type name(atype a, btype b, ctype c, dtype d) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ -type name(atype a, btype b, ctype c, dtype d, etype e) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - register long __e __asm__ ("%d5") = (long)e; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d), "d" (__e) \ - ); \ - __bsc_return(type,__res); \ -} - -#endif /* __BOOTSTD_H__ */ diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h deleted file mode 100644 index 70e7dc0..0000000 --- a/arch/m68knommu/include/asm/bug.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _M68KNOMMU_BUG_H -#define _M68KNOMMU_BUG_H -#include -#endif diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h deleted file mode 100644 index 5f382da..0000000 --- a/arch/m68knommu/include/asm/bugs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-m68k/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h deleted file mode 100644 index a6f0b8f..0000000 --- a/arch/m68knommu/include/asm/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_BYTEORDER_H -#define _M68KNOMMU_BYTEORDER_H - -#include -#include - -#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h deleted file mode 100644 index 24e9eac..0000000 --- a/arch/m68knommu/include/asm/cache.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_CACHE_H -#define __ARCH_M68KNOMMU_CACHE_H - -/* bytes per L1 cache line */ -#define L1_CACHE_BYTES 16 /* this need to be at least 1 */ - -/* m68k-elf-gcc 2.95.2 doesn't like these */ - -#define __cacheline_aligned -#define ____cacheline_aligned - -#endif diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h deleted file mode 100644 index bcf5a6a..0000000 --- a/arch/m68knommu/include/asm/cachectl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h deleted file mode 100644 index 87e5dc04..0000000 --- a/arch/m68knommu/include/asm/cacheflush.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _M68KNOMMU_CACHEFLUSH_H -#define _M68KNOMMU_CACHEFLUSH_H - -/* - * (C) Copyright 2000-2004, Greg Ungerer - */ -#include - -#define flush_cache_all() __flush_cache_all() -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) __flush_cache_all() -#define flush_cache_page(vma, vmaddr) do { } while (0) -#define flush_dcache_range(start,len) __flush_cache_all() -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start,len) __flush_cache_all() -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -static inline void __flush_cache_all(void) -{ -#ifdef CONFIG_M5407 - /* - * Use cpushl to push and invalidate all cache lines. - * Gas doesn't seem to know how to generate the ColdFire - * cpushl instruction... Oh well, bit stuff it for now. - */ - __asm__ __volatile__ ( - "nop\n\t" - "clrl %%d0\n\t" - "1:\n\t" - "movel %%d0,%%a0\n\t" - "2:\n\t" - ".word 0xf468\n\t" - "addl #0x10,%%a0\n\t" - "cmpl #0x00000800,%%a0\n\t" - "blt 2b\n\t" - "addql #1,%%d0\n\t" - "cmpil #4,%%d0\n\t" - "bne 1b\n\t" - "movel #0xb6088500,%%d0\n\t" - "movec %%d0,%%CACR\n\t" - : : : "d0", "a0" ); -#endif /* CONFIG_M5407 */ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M527x || CONFIG_M528x */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) - __asm__ __volatile__ ( - "movel #0x81000100, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ -#ifdef CONFIG_M5249 - __asm__ __volatile__ ( - "movel #0xa1000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5249 */ -#ifdef CONFIG_M532x - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M532x */ -} - -#endif /* _M68KNOMMU_CACHEFLUSH_H */ diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h deleted file mode 100644 index 8188348..0000000 --- a/arch/m68knommu/include/asm/checksum.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, __wsum sum, int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; -#ifdef CONFIG_COLDFIRE - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - return (__force __sum16)~tmp; -#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (sum)); - return (__force __sum16)~sum; -#endif -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %1,%0\n\t" - "addxl %4,%0\n\t" - "addxl %5,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (saddr) - : "0" (daddr), "1" (saddr), "d" (len + proto), - "d"(sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h deleted file mode 100644 index 83a9fa4..0000000 --- a/arch/m68knommu/include/asm/coldfire.h +++ /dev/null @@ -1,51 +0,0 @@ -/****************************************************************************/ - -/* - * coldfire.h -- Motorola ColdFire CPU sepecific defines - * - * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef coldfire_h -#define coldfire_h -/****************************************************************************/ - - -/* - * Define master clock frequency. This is essentially done at config - * time now. No point enumerating dozens of possible clock options - * here. Also the peripheral clock (bus clock) divide ratio is set - * at config time too. - */ -#ifdef CONFIG_CLOCK_SET -#define MCF_CLK CONFIG_CLOCK_FREQ -#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) -#else -#error "Don't know what your ColdFire CPU clock frequency is??" -#endif - -/* - * Define the processor support peripherals base address. - * This is generally setup by the boards start up code. - */ -#define MCF_MBAR 0x10000000 -#define MCF_MBAR2 0x80000000 -#if defined(CONFIG_M520x) -#define MCF_IPSBAR 0xFC000000 -#else -#define MCF_IPSBAR 0x40000000 -#endif - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) -#undef MCF_MBAR -#define MCF_MBAR MCF_IPSBAR -#elif defined(CONFIG_M532x) -#undef MCF_MBAR -#define MCF_MBAR 0x00000000 -#endif - -/****************************************************************************/ -#endif /* coldfire_h */ diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h deleted file mode 100644 index edf5eb6..0000000 --- a/arch/m68knommu/include/asm/commproc.h +++ /dev/null @@ -1,703 +0,0 @@ - -/* - * 68360 Communication Processor Module. - * Copyright (c) 2000 Michael Leslie (mc68360) after: - * Copyright (c) 1997 Dan Malek (mpc8xx) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * through the 68360 internal memory map. See include/asm/360_immap.h for details. - * This file is not a complete map of all of the 360 QUICC's capabilities - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM_360__ -#define __CPM_360__ - - -/* CPM Command register masks: */ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* CPM Command set (opcodes): */ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRSTOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) -#define CPM_CR_GCI_ABORT ((ushort)0x000a) -#define CPM_CR_RESET_BCS ((ushort)0x000a) - -/* CPM Channel numbers. */ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ -#define CPM_CR_CH_TMR ((ushort)0x0005) -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ -#define CPM_CR_CH_IDMA1 ((ushort)0x0009) -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ -#define CPM_CR_CH_IDMA2 ((ushort)0x000d) - - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -#if 1 /* mleslie: I dinna think we have any such restrictions on - * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ - -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ -#define CPM_DATAONLY_BASE ((uint)0x0000) -#define CPM_DATAONLY_SIZE ((uint)0x0800) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) - -#endif - - -/* Export the base address of the communication processor registers - * and dual port ram. */ -/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ -extern QUICC *pquicc; -uint m360_cpm_dpalloc(uint size); -/* void *m360_cpm_hostalloc(uint size); */ -void m360_cpm_setbrg(uint brg, uint rate); - -#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; -#endif - - -/* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ - -#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ -#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ - -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ - -#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ -#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ - -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ - -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ - -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ - -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ - -/* tx bd status/control bits (as differ from rx bd) */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_UN ((ushort)0x0002) /* Underrun */ - - - - -/* Parameter RAM offsets. */ - - - -/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. - * In 2.0, we use a more structured C struct map of DPRAM, and so - * instead, we need only a parameter ram `slot' */ - -#define PRSLOT_SCC1 0 -#define PRSLOT_SCC2 1 -#define PRSLOT_SCC3 2 -#define PRSLOT_SMC1 2 -#define PRSLOT_SCC4 3 -#define PRSLOT_SMC2 3 - - -/* #define PROFF_SCC1 ((uint)0x0000) */ -/* #define PROFF_SCC2 ((uint)0x0100) */ -/* #define PROFF_SCC3 ((uint)0x0200) */ -/* #define PROFF_SMC1 ((uint)0x0280) */ -/* #define PROFF_SCC4 ((uint)0x0300) */ -/* #define PROFF_SMC2 ((uint)0x0380) */ - - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - - -/* Function code bits. - */ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ -#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - - -#if defined (CONFIG_UCQUICC) -/* uCquicc has the following signals connected to Ethernet: - * 68360 - lxt905 - * PA0/RXD1 - rxd - * PA1/TXD1 - txd - * PA8/CLK1 - tclk - * PA9/CLK2 - rclk - * PC0/!RTS1 - t_en - * PC1/!CTS1 - col - * PC5/!CD1 - cd - */ -#define PA_ENET_RXD PA_RXD1 -#define PA_ENET_TXD PA_TXD1 -#define PA_ENET_TCLK PA_CLK1 -#define PA_ENET_RCLK PA_CLK2 -#define PC_ENET_TENA PC_RTS1 -#define PC_ENET_CLSN PC_CTS1 -#define PC_ENET_RENA PC_CD1 - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - -#endif /* config_ucquicc */ - - -#ifdef MBX -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. The TCLK and RCLK seem unique - * to the MBX860 board. Any two of the four available clocks could be - * used, and the MPC860 cookbook manual has an example using different - * clock pins. - */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PC_ENET_TENA ((ushort)0x0001) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) -#endif - -#ifdef CONFIG_RPXLITE -/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of - * this may be unique to the RPX-Lite configuration. - * Note TENA is on Port B. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003d00) -#endif - -#ifdef CONFIG_BSEIP -/* This ENET stuff is for the MPC823 with ethernet on SCC2. - * This is unique to the BSE ip-Engine board. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -/* BSE uses port B and C bits for PHY control also. -*/ -#define PB_BSE_POWERUP ((uint)0x00000004) -#define PB_BSE_FDXDIS ((uint)0x00008000) -#define PC_BSE_LOOPBACK ((ushort)0x0800) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002c00) -#endif - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. -*/ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. -*/ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PMSR_FLC ((ushort)0x8000) -#define SCU_PMSR_SL ((ushort)0x4000) -#define SCU_PMSR_CL ((ushort)0x3000) -#define SCU_PMSR_UM ((ushort)0x0c00) -#define SCU_PMSR_FRZ ((ushort)0x0200) -#define SCU_PMSR_RZS ((ushort)0x0100) -#define SCU_PMSR_SYN ((ushort)0x0080) -#define SCU_PMSR_DRT ((ushort)0x0040) -#define SCU_PMSR_PEN ((ushort)0x0010) -#define SCU_PMSR_RPM ((ushort)0x000c) -#define SCU_PMSR_REVP ((ushort)0x0008) -#define SCU_PMSR_TPM ((ushort)0x0003) -#define SCU_PMSR_TEVP ((ushort)0x0003) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - - - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -/* #define CPMVEC_NR 32 */ -/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_I2C ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#endif /* __CPM_360__ */ diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h deleted file mode 100644 index a0c4a66..0000000 --- a/arch/m68knommu/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_CPUTIME_H -#define __M68KNOMMU_CPUTIME_H - -#include - -#endif /* __M68KNOMMU_CPUTIME_H */ diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h deleted file mode 100644 index 53ee0f9..0000000 --- a/arch/m68knommu/include/asm/current.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _M68KNOMMU_CURRENT_H -#define _M68KNOMMU_CURRENT_H -/* - * current.h - * (C) Copyright 2000, Lineo, David McCullough - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - * - * rather than dedicate a register (as the m68k source does), we - * just keep a global, we should probably just change it all to be - * current and lose _current_task. - */ - -#include - -struct task_struct; - -static inline struct task_struct *get_current(void) -{ - return(current_thread_info()->task); -} - -#define current get_current() - -#endif /* _M68KNOMMU_CURRENT_H */ diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h deleted file mode 100644 index 27af327..0000000 --- a/arch/m68knommu/include/asm/dbg.h +++ /dev/null @@ -1,6 +0,0 @@ -#define DEBUG 1 -#ifdef CONFIG_COLDFIRE -#define BREAK asm volatile ("halt") -#else -#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 -#endif diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h deleted file mode 100644 index 55cbd62..0000000 --- a/arch/m68knommu/include/asm/delay.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _M68KNOMMU_DELAY_H -#define _M68KNOMMU_DELAY_H - -/* - * Copyright (C) 1994 Hamish Macdonald - * Copyright (C) 2004 Greg Ungerer - */ - -#include - -static inline void __delay(unsigned long loops) -{ -#if defined(CONFIG_COLDFIRE) - /* The coldfire runs this loop at significantly different speeds - * depending upon long word alignment or not. We'll pad it to - * long word alignment which is the faster version. - * The 0x4a8e is of course a 'tstl %fp' instruction. This is better - * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitary delay waiting - * for bus cycles to finish. Also fp/a6 isn't likely to cause a - * stall waiting for the register to become valid if such is added - * to the coldfire at some stage. - */ - __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" - "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#else - __asm__ __volatile__ ( "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#endif -} - -/* - * Ideally we use a 32*32->64 multiply to calculate the number of - * loop iterations, but the older standard 68k and ColdFire do not - * have this instruction. So for them we have a clsoe approximation - * loop using 32*32->32 multiplies only. This calculation based on - * the ARM version of delay. - * - * We want to implement: - * - * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 - */ - -#define HZSCALE (268435456 / (1000000/HZ)) - -extern unsigned long loops_per_jiffy; - -static inline void _udelay(unsigned long usecs) -{ -#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ - defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ - defined(CONFIG_COLDFIRE) - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); -#else - unsigned long tmp; - - usecs *= 4295; /* 2**32 / 1000000 */ - __asm__ ("mulul %2,%0:%1" - : "=d" (usecs), "=d" (tmp) - : "d" (usecs), "1" (loops_per_jiffy*HZ)); - __delay(usecs); -#endif -} - -/* - * Moved the udelay() function into library code, no longer inlined. - * I had to change the algorithm because we are overflowing now on - * the faster ColdFire parts. The code is a little bigger, so it makes - * sense to library it. - */ -extern void udelay(unsigned long usecs); - -#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h deleted file mode 100644 index d8f9872..0000000 --- a/arch/m68knommu/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/arch/m68knommu/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h deleted file mode 100644 index 6aeab18..0000000 --- a/arch/m68knommu/include/asm/dma-mapping.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _M68KNOMMU_DMA_MAPPING_H -#define _M68KNOMMU_DMA_MAPPING_H - -#ifdef CONFIG_PCI -#include -#else -#include -#endif - -#endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h deleted file mode 100644 index 939a020..0000000 --- a/arch/m68knommu/include/asm/dma.h +++ /dev/null @@ -1,494 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - -//#define DMA_DEBUG 1 - - -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include -#include -#include - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - // Set command register - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | // Enable completion irq - MCFDMA_DCR_CS | // Force one xfer per request - MCFDMA_DCR_AA | // Enable auto alignment - // single-address-mode - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - // sets s_rw (-> r/w) high if Memory to I/0 - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - // Memory to I/O or I/O to Memory - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - // 32 bit, 16 bit or 8 bit transfers - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - // Source incrementing, must be memory - dmalp[MCFDMA_SAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DAR] = a; - // Set source address, must be device - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - // Set command register - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting - MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. - MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. - // source static-address-mode - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - // dest static-address-mode - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - // Source incrementing, must be memory - dmalp[MCFDMA_DSAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DDAR] = a; - // Set source address, must be device - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - -#define MAX_DMA_CHANNELS 8 - -/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any - occurrence should be flagged as an error. */ -/* under 2.4 it is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h deleted file mode 100644 index b804683..0000000 --- a/arch/m68knommu/include/asm/elf.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef __ASMm68k_ELF_H -#define __ASMm68k_ELF_H - -/* - * ELF register definitions.. - */ - -#include -#include - -/* - * 68k ELF relocation types - */ -#define R_68K_NONE 0 -#define R_68K_32 1 -#define R_68K_16 2 -#define R_68K_8 3 -#define R_68K_PC32 4 -#define R_68K_PC16 5 -#define R_68K_PC8 6 -#define R_68K_GOT32 7 -#define R_68K_GOT16 8 -#define R_68K_GOT8 9 -#define R_68K_GOT32O 10 -#define R_68K_GOT16O 11 -#define R_68K_GOT8O 12 -#define R_68K_PLT32 13 -#define R_68K_PLT16 14 -#define R_68K_PLT8 15 -#define R_68K_PLT32O 16 -#define R_68K_PLT16O 17 -#define R_68K_PLT8O 18 -#define R_68K_COPY 19 -#define R_68K_GLOB_DAT 20 -#define R_68K_JMP_SLOT 21 -#define R_68K_RELATIVE 22 - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_m68kfp_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_68K) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_68K - -/* For SVR4/m68k the function pointer to be registered with `atexit' is - passed in %a1. Although my copy of the ABI has no such statement, it - is actually used on ASV. */ -#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0xD0000000UL - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - /* Bleech. */ \ - pr_reg[0] = regs->d1; \ - pr_reg[1] = regs->d2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d4; \ - pr_reg[4] = regs->d5; \ - pr_reg[7] = regs->a0; \ - pr_reg[8] = regs->a1; \ - pr_reg[14] = regs->d0; \ - pr_reg[15] = rdusp(); \ - pr_reg[16] = 0 /* regs->orig_d0 */; \ - pr_reg[17] = regs->sr; \ - pr_reg[18] = regs->pc; \ - /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ - { \ - struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ - pr_reg[5] = sw->d6; \ - pr_reg[6] = sw->d7; \ - pr_reg[10] = sw->a3; \ - pr_reg[11] = sw->a4; \ - pr_reg[12] = sw->a5; \ - pr_reg[13] = sw->a6; \ - } - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h deleted file mode 100644 index e037d4e..0000000 --- a/arch/m68knommu/include/asm/elia.h +++ /dev/null @@ -1,41 +0,0 @@ -/****************************************************************************/ - -/* - * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) - * (C) Copyright 1999-2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef elia_h -#define elia_h -/****************************************************************************/ - -#include - -#ifdef CONFIG_eLIA - -/* - * The serial port DTR and DCD lines are also on the Parallel I/O - * as well, so define those too. - */ - -#define eLIA_DCD1 0x0001 -#define eLIA_DCD0 0x0002 -#define eLIA_DTR1 0x0004 -#define eLIA_DTR0 0x0008 - -#define eLIA_PCIRESET 0x0020 - -/* - * Kernel macros to set and unset the LEDs. - */ -#ifndef __ASSEMBLY__ -extern unsigned short ppdata; -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_eLIA */ - -/****************************************************************************/ -#endif /* elia_h */ diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/arch/m68knommu/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h deleted file mode 100644 index c2553d2..0000000 --- a/arch/m68knommu/include/asm/entry.h +++ /dev/null @@ -1,182 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include -#include - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT 0xf8ff - -#ifdef __ASSEMBLY__ - -/* process bits for task_struct.flags */ -PF_TRACESYS_OFF = 3 -PF_TRACESYS_BIT = 5 -PF_PTRACED_OFF = 3 -PF_PTRACED_BIT = 4 -PF_DTRACE_OFF = 1 -PF_DTRACE_BIT = 5 - -LENOSYS = 38 - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -/* - * This is made a little more tricky on the ColdFire. There is no - * separate kernel and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things could happen. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_ALL - btst #5,%sp@(PT_SR) /* going user? */ - bnes 8f /* no, skip */ - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte - 8: - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -/* - * Quick exception save, use current stack only. - */ -.macro SAVE_LOCAL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_LOCAL - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -/* - * Software copy of the user and kernel stack pointers... Ugh... - * Need these to get around ColdFire not having separate kernel - * and user stack pointers. - */ -.globl sw_usp -.globl sw_ksp - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !CONFIG_COLDFIRE */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h deleted file mode 100644 index 7e8c22b..0000000 --- a/arch/m68knommu/include/asm/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h deleted file mode 100644 index c7df380..0000000 --- a/arch/m68knommu/include/asm/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h deleted file mode 100644 index f6a552c..0000000 --- a/arch/m68knommu/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h deleted file mode 100644 index 814b517..0000000 --- a/arch/m68knommu/include/asm/flat.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-m68knommu/flat.h -- uClinux flat-format executables - */ - -#ifndef __M68KNOMMU_FLAT_H__ -#define __M68KNOMMU_FLAT_H__ - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 1 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 - -#endif /* __M68KNOMMU_FLAT_H__ */ diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h deleted file mode 100644 index b16b2e4..0000000 --- a/arch/m68knommu/include/asm/fpu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __M68KNOMMU_FPU_H -#define __M68KNOMMU_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ -#if defined(CONFIG_M68020) || defined(CONFIG_M68030) -#define FPSTATESIZE (216/sizeof(unsigned char)) -#elif defined(CONFIG_M68040) -#define FPSTATESIZE (96/sizeof(unsigned char)) -#elif defined(CONFIG_M68KFPU_EMU) -#define FPSTATESIZE (28/sizeof(unsigned char)) -#elif defined(CONFIG_M68060) -#define FPSTATESIZE (12/sizeof(unsigned char)) -#else -/* Assume no FP unit present then... */ -#define FPSTATESIZE (2) /* dummy size */ -#endif - -#endif /* __M68K_FPU_H */ diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h deleted file mode 100644 index 6a332a9..0000000 --- a/arch/m68knommu/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h deleted file mode 100644 index bfad281..0000000 --- a/arch/m68knommu/include/asm/hardirq.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include -#include -#include - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -void ack_bad_irq(unsigned int irq); - -#endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h deleted file mode 100644 index f3ec9e5..0000000 --- a/arch/m68knommu/include/asm/hw_irq.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __M68KNOMMU_HW_IRQ_H__ -#define __M68KNOMMU_HW_IRQ_H__ - -#endif /* __M68KNOMMU_HW_IRQ_H__ */ diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h deleted file mode 100644 index 700626a..0000000 --- a/arch/m68knommu/include/asm/hwtest.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h deleted file mode 100644 index 6adef1e..0000000 --- a/arch/m68knommu/include/asm/io.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef _M68KNOMMU_IO_H -#define _M68KNOMMU_IO_H - -#ifdef __KERNEL__ - - -/* - * These are for ISA/PCI shared memory _only_ and should never be used - * on any other type of memory, including Zorro memory. They are meant to - * access the bus in the bus byte order which is little-endian!. - * - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the m68k architecture, we just read/write the - * memory location directly. - */ -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. - */ - -/* - * swap functions are sometimes needed to interface little-endian hardware - */ -static inline unsigned short _swapw(volatile unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned int _swapl(volatile unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -#define readb(addr) \ - ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -#define readw(addr) \ - ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -#define readl(addr) \ - ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -static inline void io_outsb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *ap = *bp++; -} - -static inline void io_outsw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *ap = _swapw(*bp++); -} - -static inline void io_outsl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *ap = _swapl(*bp++); -} - -static inline void io_insb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *bp++ = *ap; -} - -static inline void io_insw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *bp++ = _swapw(*ap); -} - -static inline void io_insl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *bp++ = _swapl(*ap); -} - -#define mmiowb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) io_outsl(a,b,l) - -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) io_insl(a,b,l) - -#define IO_SPACE_LIMIT 0xffff - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - -static inline void *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -extern void iounmap(void *addr); - -/* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) - -/* - * Macros used for converting between virtual and physical mappings. - */ -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_IO_H */ diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/m68knommu/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h deleted file mode 100644 index 0b1eb4d..0000000 --- a/arch/m68knommu/include/asm/ioctls.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h deleted file mode 100644 index e4a7be6..0000000 --- a/arch/m68knommu/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h deleted file mode 100644 index 9373c31..0000000 --- a/arch/m68knommu/include/asm/irq.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_IRQ_H_ -#define _M68KNOMMU_IRQ_H_ - -#ifdef CONFIG_COLDFIRE -/* - * On the ColdFire we keep track of all vectors. That way drivers - * can register whatever vector number they wish, and we can deal - * with it. - */ -#define SYS_IRQS 256 -#define NR_IRQS SYS_IRQS - -#else - -/* - * # of m68k interrupts - */ -#define SYS_IRQS 8 -#define NR_IRQS (24 + SYS_IRQS) - -#endif /* CONFIG_COLDFIRE */ - - -#define irq_canonicalize(irq) (irq) - -#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/m68knommu/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/arch/m68knommu/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h deleted file mode 100644 index bfb6707..0000000 --- a/arch/m68knommu/include/asm/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h deleted file mode 100644 index c288a19..0000000 --- a/arch/m68knommu/include/asm/linkage.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h deleted file mode 100644 index 84a39c1..0000000 --- a/arch/m68knommu/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_LOCAL_H -#define __M68KNOMMU_LOCAL_H - -#include - -#endif /* __M68KNOMMU_LOCAL_H */ diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h deleted file mode 100644 index 7e3594d..0000000 --- a/arch/m68knommu/include/asm/m5206sim.h +++ /dev/null @@ -1,131 +0,0 @@ -/****************************************************************************/ - -/* - * m5206sim.h -- ColdFire 5206 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5206sim_h -#define m5206sim_h -/****************************************************************************/ - - -/* - * Define the 5206 SIM register set addresses. - */ -#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ -#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ -#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ -#ifdef CONFIG_M5206e -#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ -#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ -#endif - -#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ - -#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ - -#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ - -#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ -#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ -#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ -#define MCFSIM_DMCR 0xc6 /* Default control */ - -#ifdef CONFIG_M5206e -#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ -#else -#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ -#endif - -#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#ifdef CONFIG_M5206e -#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ - /* Clear to select T0 input */ -#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ - /* Clear to select T0 output */ -#endif - -/* - * Some symbol defines for the Interrupt Control Register - */ -#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ -#ifdef CONFIG_M5206e -#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ -#endif - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ -#endif - -/* - * Macro to get and set IMR register. It is 16 bits on the 5206. - */ -#define mcf_getimr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) - -#define mcf_getipr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ -#endif /* m5206sim_h */ diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h deleted file mode 100644 index 49d016e..0000000 --- a/arch/m68knommu/include/asm/m520xsim.h +++ /dev/null @@ -1,63 +0,0 @@ -/****************************************************************************/ - -/* - * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. - * - * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) - */ - -/****************************************************************************/ -#ifndef m520xsim_h -#define m520xsim_h -/****************************************************************************/ - - -/* - * Define the 5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ -#define MCFINT_UART2 28 /* Interrupt number for UART2 */ -#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ -#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ -#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ -#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ -#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ -#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ -#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ - - -#define MCF_GPIO_PAR_UART (0xA4036) -#define MCF_GPIO_PAR_FECI2C (0xA4033) -#define MCF_GPIO_PAR_FEC (0xA4038) - -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) - -#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) - -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) - -#define ICR_INTRCONF 0x05 -#define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) - -/****************************************************************************/ -#endif /* m520xsim_h */ diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h deleted file mode 100644 index bf39731..0000000 --- a/arch/m68knommu/include/asm/m523xsim.h +++ /dev/null @@ -1,45 +0,0 @@ -/****************************************************************************/ - -/* - * m523xsim.h -- ColdFire 523x System Integration Module support. - * - * (C) Copyright 2003-2005, Greg Ungerer - */ - -/****************************************************************************/ -#ifndef m523xsim_h -#define m523xsim_h -/****************************************************************************/ - - -/* - * Define the 523x SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ -#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/****************************************************************************/ -#endif /* m523xsim_h */ diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h deleted file mode 100644 index 366eb86..0000000 --- a/arch/m68knommu/include/asm/m5249sim.h +++ /dev/null @@ -1,209 +0,0 @@ -/****************************************************************************/ - -/* - * m5249sim.h -- ColdFire 5249 System Integration Module support. - * - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m5249sim_h -#define m5249sim_h -/****************************************************************************/ - -/* - * Define the 5249 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * General purpose IO registers (in MBAR2). - */ -#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ - -#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ -#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ -#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ - -#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ -#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ -#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ -#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ -#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ -#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ -#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ -#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ - -#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ - -#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ -#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ - - -/* - * Macro to set IMR register. It is 32 bits on the 5249. - */ -#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ - -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ - -#ifdef __ASSEMBLER__ - -/* - * The M5249C3 board needs a little help getting all its SIM devices - * initialized at kernel start time. dBUG doesn't set much up, so - * we need to do it manually. - */ -.macro m5249c3_setup - /* - * Set MBAR1 and MBAR2, just incase they are not set. - */ - movel #0x10000001,%a0 - movec %a0,%MBAR /* map MBAR region */ - subql #1,%a0 /* get MBAR address in a0 */ - - movel #0x80000001,%a1 - movec %a1,#3086 /* map MBAR2 region */ - subql #1,%a1 /* get MBAR2 address in a1 */ - - /* - * Move secondary interrupts to base at 128. - */ - moveb #0x80,%d0 - moveb %d0,0x16b(%a1) /* interrupt base register */ - - /* - * Work around broken CSMR0/DRAM vector problem. - */ - movel #0x001F0021,%d0 /* disable C/I bit */ - movel %d0,0x84(%a0) /* set CSMR0 */ - - /* - * Disable the PLL firstly. (Who knows what state it is - * in here!). - */ - movel 0x180(%a1),%d0 /* get current PLL value */ - andl #0xfffffffe,%d0 /* PLL bypass first */ - movel %d0,0x180(%a1) /* set PLL register */ - nop - -#if CONFIG_CLOCK_FREQ == 140000000 - /* - * Set initial clock frequency. This assumes M5249C3 board - * is fitted with 11.2896MHz crystal. It will program the - * PLL for 140MHz. Lets go fast :-) - */ - movel #0x125a40f0,%d0 /* set for 140MHz */ - movel %d0,0x180(%a1) /* set PLL register */ - orl #0x1,%d0 - movel %d0,0x180(%a1) /* set PLL register */ -#endif - - /* - * Setup CS1 for ethernet controller. - * (Setup as per M5249C3 doco). - */ - movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ - movel %d0,0x8c(%a0) - movel #0x001f0021,%d0 /* CS1 size of 1Mb */ - movel %d0,0x90(%a0) - movew #0x0080,%d0 /* CS1 = 16bit port, AA */ - movew %d0,0x96(%a0) - - /* - * Setup CS2 for IDE interface. - */ - movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ - movel %d0,0x98(%a0) - movel #0x001f0001,%d0 /* CS2 size of 1MB */ - movel %d0,0x9c(%a0) - movew #0x0080,%d0 /* CS2 = 16bit, TA */ - movew %d0,0xa2(%a0) - - movel #0x00107000,%d0 /* IDEconfig1 */ - movel %d0,0x18c(%a1) - movel #0x000c0400,%d0 /* IDEconfig2 */ - movel %d0,0x190(%a1) - - movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ - orl %d0,0xc(%a1) /* function GPIO19 */ - orl %d0,0x8(%a1) /* enable GPIO19 as output */ - orl %d0,0x4(%a1) /* de-assert IDE reset */ -.endm - -#define PLATFORM_SETUP m5249c3_setup - -#endif /* __ASSEMBLER__ */ - -/****************************************************************************/ -#endif /* m5249sim_h */ diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h deleted file mode 100644 index 6217edc..0000000 --- a/arch/m68knommu/include/asm/m5272sim.h +++ /dev/null @@ -1,78 +0,0 @@ -/****************************************************************************/ - -/* - * m5272sim.h -- ColdFire 5272 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5272sim_h -#define m5272sim_h -/****************************************************************************/ - - -/* - * Define the 5272 SIM register set addresses. - */ -#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ -#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ -#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ -#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ -#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ - -#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ - -#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ -#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ -#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ -#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ - -#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ -#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ -#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ -#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ - -#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ -#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ -#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ -#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ -#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ -#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ -#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ -#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ -#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ -#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ -#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ -#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ -#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ -#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ -#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ -#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ - -#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ -#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ -#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ - - -/****************************************************************************/ -#endif /* m5272sim_h */ diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h deleted file mode 100644 index 1f63ab3..0000000 --- a/arch/m68knommu/include/asm/m527xsim.h +++ /dev/null @@ -1,74 +0,0 @@ -/****************************************************************************/ - -/* - * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. - * - * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m527xsim_h -#define m527xsim_h -/****************************************************************************/ - - -/* - * Define the 5270/5271 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_UART1 14 /* Interrupt number for UART1 */ -#define MCFINT_UART2 15 /* Interrupt number for UART2 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#ifdef CONFIG_M5271 -#define MCFSIM_DCR 0x40 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ -#endif -#ifdef CONFIG_M5275 -#define MCFSIM_DMR 0x40 /* SDRAM mode */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ -#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ -#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ -#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ -#endif - -/* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif - -/****************************************************************************/ -#endif /* m527xsim_h */ diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h deleted file mode 100644 index 28bf783..0000000 --- a/arch/m68knommu/include/asm/m528xsim.h +++ /dev/null @@ -1,159 +0,0 @@ -/****************************************************************************/ - -/* - * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m528xsim_h -#define m528xsim_h -/****************************************************************************/ - - -/* - * Define the 5280/5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/* - * Derek Cheung - 6 Feb 2005 - * add I2C and QSPI register definition using Freescale's MCF5282 - */ -/* set Port AS pin for I2C or UART */ -#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) - -/* Port UA Pin Assignment Register (8 Bit) */ -#define MCF5282_GPIO_PUAPAR 0x10005C - -/* Interrupt Mask Register Register Low */ -#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) -/* Interrupt Control Register 7 */ -#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) - - - -/********************************************************************* -* -* Inter-IC (I2C) Module -* -*********************************************************************/ -/* Read/Write access macros for general use */ -#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address -#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider -#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control -#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status -#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O - -/* Bit level definitions and macros */ -#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - - - -/********************************************************************* -* -* Queued Serial Peripheral Interface (QSPI) Module -* -*********************************************************************/ -/* Derek - 21 Feb 2005 */ -/* change to the format used in I2C */ -/* Read/Write access macros for general use */ -#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 -#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 -#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 -#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C -#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 -#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 -#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 - -/* Bit level definitions and macros */ -#define MCF5282_QSPI_QMR_MSTR (0x8000) -#define MCF5282_QSPI_QMR_DOHIE (0x4000) -#define MCF5282_QSPI_QMR_BITS_16 (0x0000) -#define MCF5282_QSPI_QMR_BITS_8 (0x2000) -#define MCF5282_QSPI_QMR_BITS_9 (0x2400) -#define MCF5282_QSPI_QMR_BITS_10 (0x2800) -#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) -#define MCF5282_QSPI_QMR_BITS_12 (0x3000) -#define MCF5282_QSPI_QMR_BITS_13 (0x3400) -#define MCF5282_QSPI_QMR_BITS_14 (0x3800) -#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) -#define MCF5282_QSPI_QMR_CPOL (0x0200) -#define MCF5282_QSPI_QMR_CPHA (0x0100) -#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QDLYR_SPE (0x80) -#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QWR_HALT (0x8000) -#define MCF5282_QSPI_QWR_WREN (0x4000) -#define MCF5282_QSPI_QWR_WRTO (0x2000) -#define MCF5282_QSPI_QWR_CSIV (0x1000) -#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) -#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) - -#define MCF5282_QSPI_QIR_WCEFB (0x8000) -#define MCF5282_QSPI_QIR_ABRTB (0x4000) -#define MCF5282_QSPI_QIR_ABRTL (0x1000) -#define MCF5282_QSPI_QIR_WCEFE (0x0800) -#define MCF5282_QSPI_QIR_ABRTE (0x0400) -#define MCF5282_QSPI_QIR_SPIFE (0x0100) -#define MCF5282_QSPI_QIR_WCEF (0x0008) -#define MCF5282_QSPI_QIR_ABRT (0x0004) -#define MCF5282_QSPI_QIR_SPIF (0x0001) - -#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) - -#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) -#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) -#define MCF5282_QSPI_QCR_CONT (0x8000) -#define MCF5282_QSPI_QCR_BITSE (0x4000) -#define MCF5282_QSPI_QCR_DT (0x2000) -#define MCF5282_QSPI_QCR_DSCK (0x1000) -#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) - -/****************************************************************************/ -#endif /* m528xsim_h */ diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h deleted file mode 100644 index 5886728..0000000 --- a/arch/m68knommu/include/asm/m5307sim.h +++ /dev/null @@ -1,181 +0,0 @@ -/****************************************************************************/ - -/* - * m5307sim.h -- ColdFire 5307 System Integration Module support. - * - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * (C) Copyright 1999, Lineo (www.lineo.com) - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5307sim_h -#define m5307sim_h -/****************************************************************************/ - -/* - * Define the 5307 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#ifdef CONFIG_OLDMASK -#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ -#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ -#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#else -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#endif /* CONFIG_OLDMASK */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* Definition offset address for CS2-7 -- old mask 5307 */ - -#define MCF5307_CS2 (0x400000) -#define MCF5307_CS3 (0x600000) -#define MCF5307_CS4 (0x800000) -#define MCF5307_CS5 (0xA00000) -#define MCF5307_CS6 (0xC00000) -#define MCF5307_CS7 (0xE00000) - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -#if defined(CONFIG_M5307) -#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ -#endif - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/****************************************************************************/ -#endif /* m5307sim_h */ diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h deleted file mode 100644 index 1835fd2..0000000 --- a/arch/m68knommu/include/asm/m532xsim.h +++ /dev/null @@ -1,2238 +0,0 @@ -/****************************************************************************/ - -/* - * m532xsim.h -- ColdFire 5329 registers - */ - -/****************************************************************************/ -#ifndef m532xsim_h -#define m532xsim_h -/****************************************************************************/ - -#define MCF_REG32(x) (*(volatile unsigned long *)(x)) -#define MCF_REG16(x) (*(volatile unsigned short *)(x)) -#define MCF_REG08(x) (*(volatile unsigned char *)(x)) - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ - -#define MCF_WTM_WCR MCF_REG16(0xFC098000) - -/* - * Define the 532x SIM register set addresses. - */ -#define MCFSIM_IPRL 0xFC048004 -#define MCFSIM_IPRH 0xFC048000 -#define MCFSIM_IPR MCFSIM_IPRL -#define MCFSIM_IMRL 0xFC04800C -#define MCFSIM_IMRH 0xFC048008 -#define MCFSIM_IMR MCFSIM_IMRL -#define MCFSIM_ICR0 0xFC048040 -#define MCFSIM_ICR1 0xFC048041 -#define MCFSIM_ICR2 0xFC048042 -#define MCFSIM_ICR3 0xFC048043 -#define MCFSIM_ICR4 0xFC048044 -#define MCFSIM_ICR5 0xFC048045 -#define MCFSIM_ICR6 0xFC048046 -#define MCFSIM_ICR7 0xFC048047 -#define MCFSIM_ICR8 0xFC048048 -#define MCFSIM_ICR9 0xFC048049 -#define MCFSIM_ICR10 0xFC04804A -#define MCFSIM_ICR11 0xFC04804B - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - - -#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ - -#define MCFSIM_IMR_SIMR0 0xFC04801C -#define MCFSIM_IMR_SIMR1 0xFC04C01C -#define MCFSIM_IMR_CIMR0 0xFC04801D -#define MCFSIM_IMR_CIMR1 0xFC04C01D - -#define MCFSIM_ICR_TIMER1 (0xFC048040+32) -#define MCFSIM_ICR_TIMER2 (0xFC048040+33) - - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -#define mcf_getiprl() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) - -#define mcf_getiprh() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) - - -#define mcf_enable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); - -#define mcf_enable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); - -#define mcf_disable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); - -#define mcf_disable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/********************************************************************* - * - * Inter-IC (I2C) Module - * - *********************************************************************/ - -/* Read/Write access macros for general use */ -#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address -#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider -#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control -#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status -#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O - -/* Bit level definitions and macros */ -#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge - -#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) - - -/* - * The M5329EVB board needs a help getting its devices initialized - * at kernel start time if dBUG doesn't set it up (for example - * it is not used), so we need to do it manually. - */ -#ifdef __ASSEMBLER__ -.macro m5329EVB_setup - movel #0xFC098000, %a7 - movel #0x0, (%a7) -#define CORE_SRAM 0x80000000 -#define CORE_SRAM_SIZE 0x8000 - movel #CORE_SRAM, %d0 - addl #0x221, %d0 - movec %d0,%RAMBAR1 - movel #CORE_SRAM, %sp - addl #CORE_SRAM_SIZE, %sp - jsr sysinit -.endm -#define PLATFORM_SETUP m5329EVB_setup - -#endif /* __ASSEMBLER__ */ - -/********************************************************************* - * - * Chip Configuration Module (CCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) -#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) -#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) -#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) -#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) -#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) -#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) - -/* Bit definitions and macros for MCF_CCM_CCR */ -#define MCF_CCM_CCR_RESERVED (0x0001) -#define MCF_CCM_CCR_PLL_MODE (0x0003) -#define MCF_CCM_CCR_OSC_MODE (0x0005) -#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_CCR_LOAD (0x0021) -#define MCF_CCM_CCR_LIMP (0x0041) -#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_RCON */ -#define MCF_CCM_RCON_RESERVED (0x0001) -#define MCF_CCM_RCON_PLL_MODE (0x0003) -#define MCF_CCM_RCON_OSC_MODE (0x0005) -#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_RCON_LOAD (0x0021) -#define MCF_CCM_RCON_LIMP (0x0041) -#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_CIR */ -#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) -#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) - -/* Bit definitions and macros for MCF_CCM_MISCCR */ -#define MCF_CCM_MISCCR_USBSRC (0x0001) -#define MCF_CCM_MISCCR_USBDIV (0x0002) -#define MCF_CCM_MISCCR_SSI_SRC (0x0010) -#define MCF_CCM_MISCCR_TIM_DMA (0x0020) -#define MCF_CCM_MISCCR_SSI_PUS (0x0040) -#define MCF_CCM_MISCCR_SSI_PUE (0x0080) -#define MCF_CCM_MISCCR_LCD_CHEN (0x0100) -#define MCF_CCM_MISCCR_LIMP (0x1000) -#define MCF_CCM_MISCCR_PLL_LOCK (0x2000) - -/* Bit definitions and macros for MCF_CCM_CDR */ -#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) -#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) - -/* Bit definitions and macros for MCF_CCM_UHCSR */ -#define MCF_CCM_UHCSR_XPDE (0x0001) -#define MCF_CCM_UHCSR_UHMIE (0x0002) -#define MCF_CCM_UHCSR_WKUP (0x0004) -#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_CCM_UOCSR */ -#define MCF_CCM_UOCSR_XPDE (0x0001) -#define MCF_CCM_UOCSR_UOMIE (0x0002) -#define MCF_CCM_UOCSR_WKUP (0x0004) -#define MCF_CCM_UOCSR_PWRFLT (0x0008) -#define MCF_CCM_UOCSR_SEND (0x0010) -#define MCF_CCM_UOCSR_VVLD (0x0020) -#define MCF_CCM_UOCSR_BVLD (0x0040) -#define MCF_CCM_UOCSR_AVLD (0x0080) -#define MCF_CCM_UOCSR_DPPU (0x0100) -#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) -#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) -#define MCF_CCM_UOCSR_DRV_VBUS (0x0800) -#define MCF_CCM_UOCSR_DMPD (0x1000) -#define MCF_CCM_UOCSR_DPPD (0x2000) -#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) - -/********************************************************************* - * - * DMA Timers (DTIM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) -#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) -#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) -#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) -#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) -#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) -#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) -#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) -#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) -#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) -#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) -#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) -#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) -#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) -#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) -#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) -#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) -#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) -#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) -#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) -#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) -#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) -#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) -#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) -#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) -#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) -#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) -#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) -#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) -#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) - -/* Bit definitions and macros for MCF_DTIM_DTMR */ -#define MCF_DTIM_DTMR_RST (0x0001) -#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) -#define MCF_DTIM_DTMR_FRR (0x0008) -#define MCF_DTIM_DTMR_ORRI (0x0010) -#define MCF_DTIM_DTMR_OM (0x0020) -#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) -#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) -#define MCF_DTIM_DTMR_CE_ANY (0x00C0) -#define MCF_DTIM_DTMR_CE_FALL (0x0080) -#define MCF_DTIM_DTMR_CE_RISE (0x0040) -#define MCF_DTIM_DTMR_CE_NONE (0x0000) -#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) -#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) -#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) -#define MCF_DTIM_DTMR_CLK_STOP (0x0000) - -/* Bit definitions and macros for MCF_DTIM_DTXMR */ -#define MCF_DTIM_DTXMR_MODE16 (0x01) -#define MCF_DTIM_DTXMR_DMAEN (0x80) - -/* Bit definitions and macros for MCF_DTIM_DTER */ -#define MCF_DTIM_DTER_CAP (0x01) -#define MCF_DTIM_DTER_REF (0x02) - -/* Bit definitions and macros for MCF_DTIM_DTRR */ -#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCR */ -#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCN */ -#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * FlexBus Chip Selects (FBCS) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) -#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) -#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) -#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) -#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) -#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) -#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) -#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) -#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) -#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) -#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) -#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) -#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) -#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) -#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) -#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) -#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) -#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) -#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) -#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) -#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) - -/* Bit definitions and macros for MCF_FBCS_CSAR */ -#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) - -/* Bit definitions and macros for MCF_FBCS_CSMR */ -#define MCF_FBCS_CSMR_V (0x00000001) -#define MCF_FBCS_CSMR_WP (0x00000100) -#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) -#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) -#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) -#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) -#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) -#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) -#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) -#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) -#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) -#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) -#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) -#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) -#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) -#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) -#define MCF_FBCS_CSMR_BAM_512K (0x00070000) -#define MCF_FBCS_CSMR_BAM_256K (0x00030000) -#define MCF_FBCS_CSMR_BAM_128K (0x00010000) -#define MCF_FBCS_CSMR_BAM_64K (0x00000000) - -/* Bit definitions and macros for MCF_FBCS_CSCR */ -#define MCF_FBCS_CSCR_BSTW (0x00000008) -#define MCF_FBCS_CSCR_BSTR (0x00000010) -#define MCF_FBCS_CSCR_BEM (0x00000020) -#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) -#define MCF_FBCS_CSCR_AA (0x00000100) -#define MCF_FBCS_CSCR_SBM (0x00000200) -#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) -#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) -#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) -#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) -#define MCF_FBCS_CSCR_SWSEN (0x00800000) -#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) -#define MCF_FBCS_CSCR_PS_8 (0x0040) -#define MCF_FBCS_CSCR_PS_16 (0x0080) -#define MCF_FBCS_CSCR_PS_32 (0x0000) - -/********************************************************************* - * - * General Purpose I/O (GPIO) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) -#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) -#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) -#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) -#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) -#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) -#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) -#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) -#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) -#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) -#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) -#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) -#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) -#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) -#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) -#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) -#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) -#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) -#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) -#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) -#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) -#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) -#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) -#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) -#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) -#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) -#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) -#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) -#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) -#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) -#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) -#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) -#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) -#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) -#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) -#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) -#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) -#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) -#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) -#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) -#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) -#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) -#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) -#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) -#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) -#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) -#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) -#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) -#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) -#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) -#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) -#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) -#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) -#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) -#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) -#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) -#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) -#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) -#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) -#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) -#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) -#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) -#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) -#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) -#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) -#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) -#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) -#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) -#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) -#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) -#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) -#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) -#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) -#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) -#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) -#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) -#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) -#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) -#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) -#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) -#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) -#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) -#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) -#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) -#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) -#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) -#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) -#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) -#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) -#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECH */ -#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) -#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) -#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) -#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) -#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) -#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) -#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) -#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECL */ -#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) -#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) -#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) -#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) -#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) -#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) -#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) -#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_SSI */ -#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) -#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) -#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) -#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) -#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ -#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_BE */ -#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) -#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) -#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) -#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_CS */ -#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) -#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) -#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) -#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) -#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_PWM */ -#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) -#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) -#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) -#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_UART */ -#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) -#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) -#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) -#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) -#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) -#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) -#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) -#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ -#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ -#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ -#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ -#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ -#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ -#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ -#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BE */ -#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) -#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) -#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) -#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_CS */ -#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) -#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) -#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) -#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) -#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ -#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_UART */ -#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) -#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) -#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) -#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) -#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) -#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) -#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) -#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ -#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ -#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ -#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ -#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ -#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ -#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ -#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ -#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PAR_FEC */ -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_PWM */ -#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) -#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ -#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) - -/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ -#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_BE */ -#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) -#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) -#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) -#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PAR_CS */ -#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) -#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) -#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) -#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) -#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_SSI */ -#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) -#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_UART */ -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) -#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) -#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) -#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) -#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) -#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) -#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) -#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) -#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) - -/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ -#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ -#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ -#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ -#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) -#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) -#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) -#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) -#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) -#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) -#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) -#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) -#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) - -/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ -#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) - -/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ -#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ -#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ -#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_UART */ -#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) -#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) - -/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ -#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ -#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ -#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ -#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ -#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ -#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ -#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) - -/********************************************************************* - * - * Interrupt Controller (INTC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) -#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) -#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) -#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) -#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) -#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) -#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) -#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) -#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) -#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) -#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) -#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) -#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) -#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) -#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) -#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) -#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) -#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) -#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) -#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) -#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) -#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) -#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) -#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) -#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) -#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) -#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) -#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) -#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) -#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) -#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) -#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) -#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) -#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) -#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) -#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) -#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) -#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) -#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) -#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) -#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) -#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) -#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) -#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) -#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) -#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) -#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) -#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) -#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) -#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) -#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) -#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) -#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) -#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) -#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) -#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) -#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) -#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) -#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) -#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) -#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) -#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) -#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) -#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) -#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) -#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) -#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) -#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) -#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) -#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) -#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) -#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) -#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) -#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) -#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) -#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) -#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) -#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) -#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) -#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) -#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) -#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) -#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) -#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) -#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) -#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) -#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) -#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) -#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) -#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) -#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) -#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) -#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) -#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) -#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) -#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) -#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) -#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) -#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) -#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) -#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) -#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) -#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) -#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) -#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) -#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) -#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) -#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) -#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) -#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) -#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) -#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) -#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) -#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) -#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) -#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) -#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) -#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) -#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) -#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) -#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) -#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) -#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) -#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) -#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) -#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) -#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) -#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) -#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) -#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) -#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) -#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) -#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) -#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) -#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) -#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) -#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) -#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) -#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) -#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) -#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) -#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) -#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) -#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) -#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) -#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) -#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) -#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) -#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) -#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) -#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) -#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) -#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) -#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) -#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) -#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) -#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) -#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) -#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) -#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) -#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) -#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) -#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) -#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) -#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) -#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) -#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) -#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) -#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) -#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) -#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) -#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) -#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) -#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) -#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) -#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) -#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) -#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) -#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) -#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) -#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) -#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) -#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) -#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) -#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) -#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) -#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) -#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) -#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) -#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) -#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) -#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) -#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) -#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) -#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) -#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) -#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) -#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) -#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) -#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) -#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) -#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) -#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) -#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) -#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) -#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) -#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) -#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) -#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) -#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) -#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) -#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) -#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) -#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) -#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) -#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) -#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) -#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) -#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) -#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) -#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) -#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) -#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) -#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) -#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) -#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) -#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) -#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) -#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) -#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) -#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) -#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) -#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) -#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) -#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) -#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) -#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) -#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) -#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) -#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) -#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) -#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) -#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) -#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) -#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) -#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) -#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) -#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) -#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) -#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) -#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) -#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) -#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) - -/* Bit definitions and macros for MCF_INTC_IPRH */ -#define MCF_INTC_IPRH_INT32 (0x00000001) -#define MCF_INTC_IPRH_INT33 (0x00000002) -#define MCF_INTC_IPRH_INT34 (0x00000004) -#define MCF_INTC_IPRH_INT35 (0x00000008) -#define MCF_INTC_IPRH_INT36 (0x00000010) -#define MCF_INTC_IPRH_INT37 (0x00000020) -#define MCF_INTC_IPRH_INT38 (0x00000040) -#define MCF_INTC_IPRH_INT39 (0x00000080) -#define MCF_INTC_IPRH_INT40 (0x00000100) -#define MCF_INTC_IPRH_INT41 (0x00000200) -#define MCF_INTC_IPRH_INT42 (0x00000400) -#define MCF_INTC_IPRH_INT43 (0x00000800) -#define MCF_INTC_IPRH_INT44 (0x00001000) -#define MCF_INTC_IPRH_INT45 (0x00002000) -#define MCF_INTC_IPRH_INT46 (0x00004000) -#define MCF_INTC_IPRH_INT47 (0x00008000) -#define MCF_INTC_IPRH_INT48 (0x00010000) -#define MCF_INTC_IPRH_INT49 (0x00020000) -#define MCF_INTC_IPRH_INT50 (0x00040000) -#define MCF_INTC_IPRH_INT51 (0x00080000) -#define MCF_INTC_IPRH_INT52 (0x00100000) -#define MCF_INTC_IPRH_INT53 (0x00200000) -#define MCF_INTC_IPRH_INT54 (0x00400000) -#define MCF_INTC_IPRH_INT55 (0x00800000) -#define MCF_INTC_IPRH_INT56 (0x01000000) -#define MCF_INTC_IPRH_INT57 (0x02000000) -#define MCF_INTC_IPRH_INT58 (0x04000000) -#define MCF_INTC_IPRH_INT59 (0x08000000) -#define MCF_INTC_IPRH_INT60 (0x10000000) -#define MCF_INTC_IPRH_INT61 (0x20000000) -#define MCF_INTC_IPRH_INT62 (0x40000000) -#define MCF_INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IPRL */ -#define MCF_INTC_IPRL_INT0 (0x00000001) -#define MCF_INTC_IPRL_INT1 (0x00000002) -#define MCF_INTC_IPRL_INT2 (0x00000004) -#define MCF_INTC_IPRL_INT3 (0x00000008) -#define MCF_INTC_IPRL_INT4 (0x00000010) -#define MCF_INTC_IPRL_INT5 (0x00000020) -#define MCF_INTC_IPRL_INT6 (0x00000040) -#define MCF_INTC_IPRL_INT7 (0x00000080) -#define MCF_INTC_IPRL_INT8 (0x00000100) -#define MCF_INTC_IPRL_INT9 (0x00000200) -#define MCF_INTC_IPRL_INT10 (0x00000400) -#define MCF_INTC_IPRL_INT11 (0x00000800) -#define MCF_INTC_IPRL_INT12 (0x00001000) -#define MCF_INTC_IPRL_INT13 (0x00002000) -#define MCF_INTC_IPRL_INT14 (0x00004000) -#define MCF_INTC_IPRL_INT15 (0x00008000) -#define MCF_INTC_IPRL_INT16 (0x00010000) -#define MCF_INTC_IPRL_INT17 (0x00020000) -#define MCF_INTC_IPRL_INT18 (0x00040000) -#define MCF_INTC_IPRL_INT19 (0x00080000) -#define MCF_INTC_IPRL_INT20 (0x00100000) -#define MCF_INTC_IPRL_INT21 (0x00200000) -#define MCF_INTC_IPRL_INT22 (0x00400000) -#define MCF_INTC_IPRL_INT23 (0x00800000) -#define MCF_INTC_IPRL_INT24 (0x01000000) -#define MCF_INTC_IPRL_INT25 (0x02000000) -#define MCF_INTC_IPRL_INT26 (0x04000000) -#define MCF_INTC_IPRL_INT27 (0x08000000) -#define MCF_INTC_IPRL_INT28 (0x10000000) -#define MCF_INTC_IPRL_INT29 (0x20000000) -#define MCF_INTC_IPRL_INT30 (0x40000000) -#define MCF_INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRH */ -#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) -#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) -#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) -#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) -#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) -#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) -#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) -#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) -#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) -#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) -#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) -#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) -#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) -#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) -#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) -#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) -#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) -#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) -#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) -#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) -#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) -#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) -#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) -#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) -#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) -#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) -#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) -#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) -#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) -#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) -#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) -#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRL */ -#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) -#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) -#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) -#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) -#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) -#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) -#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) -#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) -#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) -#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) -#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) -#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) -#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) -#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) -#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) -#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) -#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) -#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) -#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) -#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) -#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) -#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) -#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) -#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) -#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) -#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) -#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) -#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) -#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) -#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) -#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) -#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCH */ -#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) -#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) -#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) -#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) -#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) -#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) -#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) -#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) -#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) -#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) -#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) -#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) -#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) -#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) -#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) -#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) -#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) -#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) -#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) -#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) -#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) -#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) -#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) -#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) -#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) -#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) -#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) -#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) -#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) -#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) -#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) -#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCL */ -#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) -#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) -#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) -#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) -#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) -#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) -#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) -#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) -#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) -#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) -#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) -#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) -#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) -#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) -#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) -#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) -#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) -#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) -#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) -#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) -#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) -#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) -#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) -#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) -#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) -#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) -#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) -#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) -#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) -#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) -#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) -#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_ICONFIG */ -#define MCF_INTC_ICONFIG_EMASK (0x0020) -#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) -#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) -#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) -#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) -#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) -#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) -#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for MCF_INTC_SIMR */ -#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CIMR */ -#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CLMASK */ -#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_SLMASK */ -#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_ICR */ -#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) - -/* Bit definitions and macros for MCF_INTC_SWIACK */ -#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_INTC_LIACK */ -#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) - -/********************************************************************/ -/********************************************************************* -* -* LCD Controller (LCDC) -* -*********************************************************************/ - -/* Register read/write macros */ -#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) -#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) -#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) -#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) -#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) -#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) -#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) -#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) -#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) -#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) -#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) -#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) -#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) -#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) -#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) -#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) -#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) -#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) -#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) -#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) -#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) -#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) -#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) -#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) -#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) -#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) - -/* Bit definitions and macros for MCF_LCDC_LSSAR */ -#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LSR */ -#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LVPWR */ -#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LCPR */ -#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) -#define MCF_LCDC_LCPR_OP (0x10000000) -#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) -#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) -#define MCF_LCDC_LCPR_CC_OR (0x40000000) -#define MCF_LCDC_LCPR_CC_XOR (0x80000000) -#define MCF_LCDC_LCPR_CC_AND (0xC0000000) -#define MCF_LCDC_LCPR_OP_ON (0x10000000) -#define MCF_LCDC_LCPR_OP_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCWHBR */ -#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) -#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCCMR */ -#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) - -/* Bit definitions and macros for MCF_LCDC_LPCR */ -#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LPCR_SHARP (0x00000040) -#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) -#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) -#define MCF_LCDC_LPCR_ACDSEL (0x00008000) -#define MCF_LCDC_LPCR_REV_VS (0x00010000) -#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) -#define MCF_LCDC_LPCR_ENDSEL (0x00040000) -#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) -#define MCF_LCDC_LPCR_OEPOL (0x00100000) -#define MCF_LCDC_LPCR_CLKPOL (0x00200000) -#define MCF_LCDC_LPCR_LPPOL (0x00400000) -#define MCF_LCDC_LPCR_FLM (0x00800000) -#define MCF_LCDC_LPCR_PIXPOL (0x01000000) -#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) -#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) -#define MCF_LCDC_LPCR_COLOR (0x40000000) -#define MCF_LCDC_LPCR_TFT (0x80000000) -#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) -#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) -#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) -#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) -#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) -#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) -#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) -#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) -#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) -#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) -#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) -#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) -#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) -#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) - -#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) - -/* Bit definitions and macros for MCF_LCDC_LHCR */ -#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LVCR */ -#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LPOR */ -#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LPCCR */ -#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LPCCR_CC_EN (0x00000100) -#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) -#define MCF_LCDC_LPCCR_LDMSK (0x00008000) -#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) -#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) -#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) -#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) - -/* Bit definitions and macros for MCF_LCDC_LDCR */ -#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LDCR_BURST (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LRMCR */ -#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) - -/* Bit definitions and macros for MCF_LCDC_LICR */ -#define MCF_LCDC_LICR_INTCON (0x00000001) -#define MCF_LCDC_LICR_INTSYN (0x00000004) -#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) - -/* Bit definitions and macros for MCF_LCDC_LIER */ -#define MCF_LCDC_LIER_BOF_EN (0x00000001) -#define MCF_LCDC_LIER_EOF_EN (0x00000002) -#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) -#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) -#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) -#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) -#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) -#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LISR */ -#define MCF_LCDC_LISR_BOF (0x00000001) -#define MCF_LCDC_LISR_EOF (0x00000002) -#define MCF_LCDC_LISR_ERR_RES (0x00000004) -#define MCF_LCDC_LISR_UDR_ERR (0x00000008) -#define MCF_LCDC_LISR_GW_BOF (0x00000010) -#define MCF_LCDC_LISR_GW_EOF (0x00000020) -#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) -#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LGWSAR */ -#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LGWSR */ -#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ -#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPOR */ -#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPR */ -#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) - -/* Bit definitions and macros for MCF_LCDC_LGWCR */ -#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) -#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) -#define MCF_LCDC_LGWCR_GWE (0x00400000) -#define MCF_LCDC_LGWCR_GWCKE (0x00800000) -#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) - -/* Bit definitions and macros for MCF_LCDC_LGWDCR */ -#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LGWDCR_GWBT (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LSCR */ -#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) -#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) -#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) -#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) -#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) - -/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ -#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ -#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * Phase Locked Loop (PLL) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) -#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) -#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) -#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) - -/* Bit definitions and macros for MCF_PLL_PODR */ -#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) -#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) - -/* Bit definitions and macros for MCF_PLL_PLLCR */ -#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) -#define MCF_PLL_PLLCR_DITHEN (0x80) - -/* Bit definitions and macros for MCF_PLL_PMDR */ -#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_PLL_PFDR */ -#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) - -/********************************************************************* - * - * System Control Module Registers (SCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SCM_MPR MCF_REG32(0xFC000000) -#define MCF_SCM_PACRA MCF_REG32(0xFC000020) -#define MCF_SCM_PACRB MCF_REG32(0xFC000024) -#define MCF_SCM_PACRC MCF_REG32(0xFC000028) -#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) -#define MCF_SCM_PACRE MCF_REG32(0xFC000040) -#define MCF_SCM_PACRF MCF_REG32(0xFC000044) - -#define MCF_SCM_BCR MCF_REG32(0xFC040024) - -/********************************************************************* - * - * SDRAM Controller (SDRAMC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) -#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) -#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) -#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) -#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) -#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) -#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) -#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) -#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) -#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) -#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) - -/* Bit definitions and macros for MCF_SDRAMC_SDMR */ -#define MCF_SDRAMC_SDMR_CMD (0x00010000) -#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) -#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) -#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) -#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCR */ -#define MCF_SDRAMC_SDCR_IPALL (0x00000002) -#define MCF_SDRAMC_SDCR_IREF (0x00000004) -#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) -#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) -#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) -#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) -#define MCF_SDRAMC_SDCR_REF (0x10000000) -#define MCF_SDRAMC_SDCR_DDR (0x20000000) -#define MCF_SDRAMC_SDCR_CKE (0x40000000) -#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) -#define MCF_SDRAMC_SDCR_PS_16 (0x00002000) -#define MCF_SDRAMC_SDCR_PS_32 (0x00000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ -#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) -#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) -#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) -#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) -#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ -#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) -#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) -#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) - -/* Device Errata - LIMP mode work around */ -#define MCF_SDRAMC_REFRESH (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDDS */ -#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) -#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) -#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) -#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) -#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) - -/* Bit definitions and macros for MCF_SDRAMC_SDCS */ -#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) -#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) -#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) -#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) -#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) - -/********************************************************************* - * - * FlexCAN module registers - * - *********************************************************************/ -#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) -#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) -#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) -#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) -#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) -#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) -#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) -#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) -#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) -#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) -#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) - -#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) -#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) -#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) - -/* - * FlexCAN Module Configuration Register - */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_MAXMB(x) ((x)&0x0F) - -/* - * FlexCAN Control Register - */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SAMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) ((x)&0x07) - -/* - * FlexCAN Error Counter Register - */ -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) -#define ERRCNT_TXECTR(x) ((x)&0xFF) - -/* - * FlexCAN Error and Status Register - */ -#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) - -/* - * Interrupt Mask Register - */ -#define IMASK_BUF15M (0x8000) -#define IMASK_BUF14M (0x4000) -#define IMASK_BUF13M (0x2000) -#define IMASK_BUF12M (0x1000) -#define IMASK_BUF11M (0x0800) -#define IMASK_BUF10M (0x0400) -#define IMASK_BUF9M (0x0200) -#define IMASK_BUF8M (0x0100) -#define IMASK_BUF7M (0x0080) -#define IMASK_BUF6M (0x0040) -#define IMASK_BUF5M (0x0020) -#define IMASK_BUF4M (0x0010) -#define IMASK_BUF3M (0x0008) -#define IMASK_BUF2M (0x0004) -#define IMASK_BUF1M (0x0002) -#define IMASK_BUF0M (0x0001) -#define IMASK_BUFnM(x) (0x1<<(x)) -#define IMASK_BUFF_ENABLE_ALL (0x1111) -#define IMASK_BUFF_DISABLE_ALL (0x0000) - -/* - * Interrupt Flag Register - */ -#define IFLAG_BUF15M (0x8000) -#define IFLAG_BUF14M (0x4000) -#define IFLAG_BUF13M (0x2000) -#define IFLAG_BUF12M (0x1000) -#define IFLAG_BUF11M (0x0800) -#define IFLAG_BUF10M (0x0400) -#define IFLAG_BUF9M (0x0200) -#define IFLAG_BUF8M (0x0100) -#define IFLAG_BUF7M (0x0080) -#define IFLAG_BUF6M (0x0040) -#define IFLAG_BUF5M (0x0020) -#define IFLAG_BUF4M (0x0010) -#define IFLAG_BUF3M (0x0008) -#define IFLAG_BUF2M (0x0004) -#define IFLAG_BUF1M (0x0002) -#define IFLAG_BUF0M (0x0001) -#define IFLAG_BUFF_SET_ALL (0xFFFF) -#define IFLAG_BUFF_CLEAR_ALL (0x0000) -#define IFLAG_BUFnM(x) (0x1<<(x)) - -/* - * Message Buffers - */ -#define MB_CNT_CODE(x) (((x)&0x0F)<<24) -#define MB_CNT_SRR (0x00400000) -#define MB_CNT_IDE (0x00200000) -#define MB_CNT_RTR (0x00100000) -#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) -#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) -#define MB_ID_STD(x) (((x)&0x07FF)<<18) -#define MB_ID_EXT(x) ((x)&0x3FFFF) - -/********************************************************************* - * - * Edge Port Module (EPORT) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) - -/* Bit definitions and macros for MCF_EPORT_EPPAR */ -#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -#define MCF_EPORT_EPPAR_LEVEL (0) -#define MCF_EPORT_EPPAR_RISING (1) -#define MCF_EPORT_EPPAR_FALLING (2) -#define MCF_EPORT_EPPAR_BOTH (3) -#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) -#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) -#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) -#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) -#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) -#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) -#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) -#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) -#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) -#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) -#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) -#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) -#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) -#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) -#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) -#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) -#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) -#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) -#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) -#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) -#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) - -/* Bit definitions and macros for MCF_EPORT_EPDDR */ -#define MCF_EPORT_EPDDR_EPDD1 (0x02) -#define MCF_EPORT_EPDDR_EPDD2 (0x04) -#define MCF_EPORT_EPDDR_EPDD3 (0x08) -#define MCF_EPORT_EPDDR_EPDD4 (0x10) -#define MCF_EPORT_EPDDR_EPDD5 (0x20) -#define MCF_EPORT_EPDDR_EPDD6 (0x40) -#define MCF_EPORT_EPDDR_EPDD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPIER */ -#define MCF_EPORT_EPIER_EPIE1 (0x02) -#define MCF_EPORT_EPIER_EPIE2 (0x04) -#define MCF_EPORT_EPIER_EPIE3 (0x08) -#define MCF_EPORT_EPIER_EPIE4 (0x10) -#define MCF_EPORT_EPIER_EPIE5 (0x20) -#define MCF_EPORT_EPIER_EPIE6 (0x40) -#define MCF_EPORT_EPIER_EPIE7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPDR */ -#define MCF_EPORT_EPDR_EPD1 (0x02) -#define MCF_EPORT_EPDR_EPD2 (0x04) -#define MCF_EPORT_EPDR_EPD3 (0x08) -#define MCF_EPORT_EPDR_EPD4 (0x10) -#define MCF_EPORT_EPDR_EPD5 (0x20) -#define MCF_EPORT_EPDR_EPD6 (0x40) -#define MCF_EPORT_EPDR_EPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPPDR */ -#define MCF_EPORT_EPPDR_EPPD1 (0x02) -#define MCF_EPORT_EPPDR_EPPD2 (0x04) -#define MCF_EPORT_EPPDR_EPPD3 (0x08) -#define MCF_EPORT_EPPDR_EPPD4 (0x10) -#define MCF_EPORT_EPPDR_EPPD5 (0x20) -#define MCF_EPORT_EPPDR_EPPD6 (0x40) -#define MCF_EPORT_EPPDR_EPPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPFR */ -#define MCF_EPORT_EPFR_EPF1 (0x02) -#define MCF_EPORT_EPFR_EPF2 (0x04) -#define MCF_EPORT_EPFR_EPF3 (0x08) -#define MCF_EPORT_EPFR_EPF4 (0x10) -#define MCF_EPORT_EPFR_EPF5 (0x20) -#define MCF_EPORT_EPFR_EPF6 (0x40) -#define MCF_EPORT_EPFR_EPF7 (0x80) - -/********************************************************************/ -#endif /* m532xsim_h */ diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h deleted file mode 100644 index cc22c4a..0000000 --- a/arch/m68knommu/include/asm/m5407sim.h +++ /dev/null @@ -1,157 +0,0 @@ -/****************************************************************************/ - -/* - * m5407sim.h -- ColdFire 5407 System Integration Module support. - * - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5407sim_h -#define m5407sim_h -/****************************************************************************/ - -/* - * Define the 5407 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * Macro to set IMR register. It is 32 bits on the 5407. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_DEC 0x80000000 /* Enable data cache */ -#define CACR_DWP 0x40000000 /* Data write protection */ -#define CACR_DESB 0x20000000 /* Enable data store buffer */ -#define CACR_DDPI 0x10000000 /* Disable CPUSHL */ -#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ -#define CACR_DDCM_WT 0x00000000 /* Write through cache*/ -#define CACR_DDCM_CP 0x02000000 /* Copyback cache */ -#define CACR_DDCM_P 0x04000000 /* No cache, precise */ -#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ -#define CACR_DCINVA 0x01000000 /* Invalidate data cache */ -#define CACR_BEC 0x00080000 /* Enable branch cache */ -#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ -#define CACR_IEC 0x00008000 /* Enable instruction cache */ -#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ -#define CACR_IDPI 0x00001000 /* Disable CPUSHL */ -#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ -#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ -#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ - -#define ACR_BASE_POS 24 /* Address Base */ -#define ACR_MASK_POS 16 /* Address Mask */ -#define ACR_ENABLE 0x00008000 /* Enable address */ -#define ACR_USER 0x00000000 /* User mode access only */ -#define ACR_SUPER 0x00002000 /* Supervisor mode only */ -#define ACR_ANY 0x00004000 /* Match any access mode */ -#define ACR_CM_WT 0x00000000 /* Write through mode */ -#define ACR_CM_CP 0x00000020 /* Copyback mode */ -#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ -#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ -#define ACR_WPROTECT 0x00000004 /* Write protect */ - -/****************************************************************************/ -#endif /* m5407sim_h */ diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h deleted file mode 100644 index eb7d39e..0000000 --- a/arch/m68knommu/include/asm/m68360.h +++ /dev/null @@ -1,13 +0,0 @@ -#include "m68360_regs.h" -#include "m68360_pram.h" -#include "m68360_quicc.h" -#include "m68360_enet.h" - -#ifdef CONFIG_M68360 - -#define CPM_INTERRUPT 4 - -/* see MC68360 User's Manual, p. 7-377 */ -#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ - -#endif /* CONFIG_M68360 */ diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h deleted file mode 100644 index c36f4d0..0000000 --- a/arch/m68knommu/include/asm/m68360_enet.h +++ /dev/null @@ -1,177 +0,0 @@ -/*********************************** - * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions for the ETHERNET controllers - *************************************** - */ - -#ifndef __ETHER_H -#define __ETHER_H - -#include "quicc_simple.h" - -/* - * transmit BD's - */ -#define T_R 0x8000 /* ready bit */ -#define E_T_PAD 0x4000 /* short frame padding */ -#define T_W 0x2000 /* wrap bit */ -#define T_I 0x1000 /* interrupt on completion */ -#define T_L 0x0800 /* last in frame */ -#define T_TC 0x0400 /* transmit CRC (when last) */ - -#define T_DEF 0x0200 /* defer indication */ -#define T_HB 0x0100 /* heartbeat */ -#define T_LC 0x0080 /* error: late collision */ -#define T_RL 0x0040 /* error: retransmission limit */ -#define T_RC 0x003c /* retry count */ -#define T_UN 0x0002 /* error: underrun */ -#define T_CSL 0x0001 /* carier sense lost */ -#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) - -/* - * receive BD's - */ -#define R_E 0x8000 /* buffer empty */ -#define R_W 0x2000 /* wrap bit */ -#define R_I 0x1000 /* interrupt on reception */ -#define R_L 0x0800 /* last BD in frame */ -#define R_F 0x0400 /* first BD in frame */ -#define R_M 0x0100 /* received because of promisc. mode */ - -#define R_LG 0x0020 /* frame too long */ -#define R_NO 0x0010 /* non-octet aligned */ -#define R_SH 0x0008 /* short frame */ -#define R_CR 0x0004 /* receive CRC error */ -#define R_OV 0x0002 /* receive overrun */ -#define R_CL 0x0001 /* collision */ -#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) - - -/* - * ethernet interrupts - */ -#define ETHERNET_GRA 0x0080 /* graceful stop complete */ -#define ETHERNET_TXE 0x0010 /* transmit error */ -#define ETHERNET_RXF 0x0008 /* receive frame */ -#define ETHERNET_BSY 0x0004 /* busy condition */ -#define ETHERNET_TXB 0x0002 /* transmit buffer */ -#define ETHERNET_RXB 0x0001 /* receive buffer */ - -/* - * ethernet protocol specific mode register (PSMR) - */ -#define ETHER_HBC 0x8000 /* heartbeat checking */ -#define ETHER_FC 0x4000 /* force collision */ -#define ETHER_RSH 0x2000 /* receive short frames */ -#define ETHER_IAM 0x1000 /* individual address mode */ -#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ -#define ETHER_PRO 0x0200 /* promiscuous */ -#define ETHER_BRO 0x0100 /* broadcast address */ -#define ETHER_SBT 0x0080 /* stop backoff timer */ -#define ETHER_LPB 0x0040 /* Loop Back Mode */ -#define ETHER_SIP 0x0020 /* sample input pins */ -#define ETHER_LCW 0x0010 /* late collision window */ -#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ -#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ -#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ -#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ -#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ -#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ -#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ -#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ - -/* - * ethernet specific parameters - */ -#define CRC_WORD 4 /* Length in bytes of CRC */ -#define C_PRES 0xffffffff /* preform 32 bit CRC */ -#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ -#define CRCEC 0x00000000 -#define ALEC 0x00000000 -#define DISFC 0x00000000 -#define PADS 0x00000000 -#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ -#define ETH_MFLR 0x05ee /* 1518 max frame size */ -#define MINFLR 0x0040 /* Minimum frame size 64 */ -#define MAXD1 0x05ee /* Max dma count 1518 */ -#define MAXD2 0x05ee -#define GADDR1 0x00000000 /* Clear group address */ -#define GADDR2 0x00000000 -#define GADDR3 0x00000000 -#define GADDR4 0x00000000 -#define P_PER 0x00000000 /*not used */ -#define IADDR1 0x00000000 /* Individual hash table not used */ -#define IADDR2 0x00000000 -#define IADDR3 0x00000000 -#define IADDR4 0x00000000 -#define TADDR_H 0x00000000 /* clear this regs */ -#define TADDR_M 0x00000000 -#define TADDR_L 0x00000000 - -/* SCC Parameter Ram */ -#define RFCR 0x18 /* normal operation */ -#define TFCR 0x18 /* normal operation */ -#define E_MRBLR 1518 /* Max ethernet frame length */ - -/* - * ethernet specific structure - */ -typedef union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; -} ETHER_ADDR; - -typedef struct { - int max_frame_length; - int promisc_mode; - int reject_broadcast; - ETHER_ADDR phys_adr; -} ETHER_SPECIFIC; - -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[1]; -} ETHER_FRAME; - -#define MAX_DATALEN 1500 -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[MAX_DATALEN]; - unsigned char fcs[CRC_WORD]; -} ETHER_MAX_FRAME; - - -/* - * Internal ethernet function prototypes - */ -void ether_interrupt(int scc_num); -/* mleslie: debug */ -/* static void ethernet_rx_internal(int scc_num); */ -/* static void ethernet_tx_internal(int scc_num); */ - -/* - * User callable routines prototypes (ethernet specific) - */ -void ethernet_init(int scc_number, - alloc_routine *alloc_buffer, - free_routine *free_buffer, - store_rx_buffer_routine *store_rx_buffer, - handle_tx_error_routine *handle_tx_error, - handle_rx_error_routine *handle_rx_error, - handle_lost_error_routine *handle_lost_error, - ETHER_SPECIFIC *ether_spec); -int ethernet_tx(int scc_number, void *buf, int length); - -#endif - diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h deleted file mode 100644 index e6088bb..0000000 --- a/arch/m68knommu/include/asm/m68360_pram.h +++ /dev/null @@ -1,431 +0,0 @@ -/*********************************** - * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the parameter area RAM. - * Note that different structures are overlaid - * at the same offsets for the different modes - * of operation. - *************************************** - */ - -#ifndef __PRAM_H -#define __PRAM_H - -/* Time slot assignment table */ -#define VALID_SLOT 0x8000 -#define WRAP_SLOT 0x4000 - -/***************************************************************** - Global Multichannel parameter RAM -*****************************************************************/ -struct global_multi_pram { - /* - * Global Multichannel parameter RAM - */ - unsigned long mcbase; /* Multichannel Base pointer */ - unsigned short qmcstate; /* Multichannel Controller state */ - unsigned short mrblr; /* Maximum Receive Buffer Length */ - unsigned short tx_s_ptr; /* TSTATx Pointer */ - unsigned short rxptr; /* Current Time slot entry in TSATRx */ - unsigned short grfthr; /* Global Receive frame threshold */ - unsigned short grfcnt; /* Global Receive Frame Count */ - unsigned long intbase; /* Multichannel Base address */ - unsigned long iintptr; /* Pointer to interrupt queue */ - unsigned short rx_s_ptr; /* TSTARx Pointer */ - - unsigned short txptr; /* Current Time slot entry in TSATTx */ - unsigned long c_mask32; /* CRC Constant (debb20e3) */ - unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ - unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ - unsigned short c_mask16; /* CRC Constant (f0b8) */ -}; - -/***************************************************************** - Quicc32 HDLC parameter RAM -*****************************************************************/ -struct quicc32_pram { - - unsigned short tbase; /* Tx Buffer Descriptors Base Address */ - unsigned short chamr; /* Channel Mode Register */ - unsigned long tstate; /* Tx Internal State */ - unsigned long txintr; /* Tx Internal Data Pointer */ - unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ - unsigned short txcntr; /* Tx Internal Byte Count */ - unsigned long tupack; /* (Tx Temp) */ - unsigned long zistate; /* Zero Insertion machine state */ - unsigned long tcrc; /* Temp Transmit CRC */ - unsigned short intmask; /* Channel's interrupt mask flags */ - unsigned short bdflags; - unsigned short rbase; /* Rx Buffer Descriptors Base Address */ - unsigned short mflr; /* Max Frame Length Register */ - unsigned long rstate; /* Rx Internal State */ - unsigned long rxintr; /* Rx Internal Data Pointer */ - unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ - unsigned short rxbyc; /* Rx Internal Byte Count */ - unsigned long rpack; /* (Rx Temp) */ - unsigned long zdstate; /* Zero Deletion machine state */ - unsigned long rcrc; /* Temp Transmit CRC */ - unsigned short maxc; /* Max_length counter */ - unsigned short tmp_mb; /* Temp */ -}; - - -/***************************************************************** - HDLC parameter RAM -*****************************************************************/ - -struct hdlc_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * HDLC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long c_mask; /* CRC constant */ - unsigned long c_pres; /* CRC preset */ - unsigned short disfc; /* discarded frame counter */ - unsigned short crcec; /* CRC error counter */ - unsigned short abtsc; /* abort sequence counter */ - unsigned short nmarc; /* nonmatching address rx cnt */ - unsigned short retrc; /* frame retransmission cnt */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short max_cnt; /* maximum length counter */ - unsigned short rfthr; /* received frames threshold */ - unsigned short rfcnt; /* received frames count */ - unsigned short hmask; /* user defined frm addr mask */ - unsigned short haddr1; /* user defined frm address 1 */ - unsigned short haddr2; /* user defined frm address 2 */ - unsigned short haddr3; /* user defined frm address 3 */ - unsigned short haddr4; /* user defined frm address 4 */ - unsigned short tmp; /* temp */ - unsigned short tmp_mb; /* temp */ -}; - - - -/***************************************************************** - UART parameter RAM -*****************************************************************/ - -/* - * bits in uart control characters table - */ -#define CC_INVALID 0x8000 /* control character is valid */ -#define CC_REJ 0x4000 /* don't store char in buffer */ -#define CC_CHAR 0x00ff /* control character */ - -/* UART */ -struct uart_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rx_temp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * UART specific parameter RAM - */ - unsigned char RESERVED1[8]; /* Reserved area */ - unsigned short max_idl; /* maximum idle characters */ - unsigned short idlc; /* rx idle counter (internal) */ - unsigned short brkcr; /* break count register */ - - unsigned short parec; /* Rx parity error counter */ - unsigned short frmer; /* Rx framing error counter */ - unsigned short nosec; /* Rx noise counter */ - unsigned short brkec; /* Rx break character counter */ - unsigned short brkln; /* Reaceive break length */ - - unsigned short uaddr1; /* address character 1 */ - unsigned short uaddr2; /* address character 2 */ - unsigned short rtemp; /* temp storage */ - unsigned short toseq; /* Tx out of sequence char */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Rx control char mask */ - unsigned short rccr; /* Rx control char register */ - unsigned short rlbc; /* Receive last break char */ -}; - - - -/***************************************************************** - BISYNC parameter RAM -*****************************************************************/ - -struct bisync_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * BISYNC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long crcc; /* CRC Constant Temp Value */ - unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ - unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ - unsigned short parec; /* Receive Parity Error Counter */ - unsigned short bsync; /* BISYNC SYNC Character */ - unsigned short bdle; /* BISYNC DLE Character */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Receive Control Character Mask */ -}; - -/***************************************************************** - IOM2 parameter RAM - (overlaid on tx bd[5] of SCC channel[2]) -*****************************************************************/ -struct iom2_pram { - unsigned short ci_data; /* ci data */ - unsigned short monitor_data; /* monitor data */ - unsigned short tstate; /* transmitter state */ - unsigned short rstate; /* receiver state */ -}; - -/***************************************************************** - SPI/SMC parameter RAM - (overlaid on tx bd[6,7] of SCC channel[2]) -*****************************************************************/ - -#define SPI_R 0x8000 /* Ready bit in BD */ - -struct spi_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ -}; - -struct smc_uart_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short max_idl; /* Maximum IDLE Characters */ - unsigned short idlc; /* Temporary IDLE Counter */ - unsigned short brkln; /* Last Rx Break Length */ - unsigned short brkec; /* Rx Break Condition Counter */ - unsigned short brkcr; /* Break Count Register (Tx) */ - unsigned short r_mask; /* Temporary bit mask */ -}; - -struct smc_trnsp_pram { - unsigned short rbase; /* rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short reserved[5]; /* Reserved */ -}; - -struct idma_pram { - unsigned short ibase; /* IDMA BD Base Address */ - unsigned short ibptr; /* IDMA buffer descriptor pointer */ - unsigned long istate; /* IDMA internal state */ - unsigned long itemp; /* IDMA temp */ -}; - -struct ethernet_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * ETHERNET specific parameter RAM - */ - unsigned long c_pres; /* preset CRC */ - unsigned long c_mask; /* constant mask for CRC */ - unsigned long crcec; /* CRC error counter */ - unsigned long alec; /* alighnment error counter */ - unsigned long disfc; /* discard frame counter */ - unsigned short pads; /* short frame PAD characters */ - unsigned short ret_lim; /* retry limit threshold */ - unsigned short ret_cnt; /* retry limit counter */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short minflr; /* minimum frame length reg */ - unsigned short maxd1; /* maximum DMA1 length reg */ - unsigned short maxd2; /* maximum DMA2 length reg */ - unsigned short maxd; /* rx max DMA */ - unsigned short dma_cnt; /* rx dma counter */ - unsigned short max_b; /* max bd byte count */ - unsigned short gaddr1; /* group address filter 1 */ - unsigned short gaddr2; /* group address filter 2 */ - unsigned short gaddr3; /* group address filter 3 */ - unsigned short gaddr4; /* group address filter 4 */ - unsigned long tbuf0_data0; /* save area 0 - current frm */ - unsigned long tbuf0_data1; /* save area 1 - current frm */ - unsigned long tbuf0_rba0; - unsigned long tbuf0_crc; - unsigned short tbuf0_bcnt; - union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; - } paddr; - unsigned short p_per; /* persistence */ - unsigned short rfbd_ptr; /* rx first bd pointer */ - unsigned short tfbd_ptr; /* tx first bd pointer */ - unsigned short tlbd_ptr; /* tx last bd pointer */ - unsigned long tbuf1_data0; /* save area 0 - next frame */ - unsigned long tbuf1_data1; /* save area 1 - next frame */ - unsigned long tbuf1_rba0; - unsigned long tbuf1_crc; - unsigned short tbuf1_bcnt; - unsigned short tx_len; /* tx frame length counter */ - unsigned short iaddr1; /* individual address filter 1*/ - unsigned short iaddr2; /* individual address filter 2*/ - unsigned short iaddr3; /* individual address filter 3*/ - unsigned short iaddr4; /* individual address filter 4*/ - unsigned short boff_cnt; /* back-off counter */ - unsigned short taddr_h; /* temp address (MSB) */ - unsigned short taddr_m; /* temp address */ - unsigned short taddr_l; /* temp address (LSB) */ -}; - -struct transparent_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * TRANSPARENT specific parameter RAM - */ - unsigned long crc_p; /* CRC Preset */ - unsigned long crc_c; /* CRC constant */ -}; - -struct timer_pram { - /* - * RISC timers parameter RAM - */ - unsigned short tm_base; /* RISC timer table base adr */ - unsigned short tm_ptr; /* RISC timer table pointer */ - unsigned short r_tmr; /* RISC timer mode register */ - unsigned short r_tmv; /* RISC timer valid register */ - unsigned long tm_cmd; /* RISC timer cmd register */ - unsigned long tm_cnt; /* RISC timer internal cnt */ -}; - -#endif diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h deleted file mode 100644 index 6d40f4d..0000000 --- a/arch/m68knommu/include/asm/m68360_quicc.h +++ /dev/null @@ -1,362 +0,0 @@ -/*********************************** - * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of QUICC memory structures - *************************************** - */ - -#ifndef __M68360_QUICC_H -#define __M68360_QUICC_H - -/* - * include registers and - * parameter ram definitions files - */ -#include -#include - - - -/* Buffer Descriptors */ -typedef struct quicc_bd { - volatile unsigned short status; - volatile unsigned short length; - volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ -} QUICC_BD; - - -#ifdef MOTOROLA_ORIGINAL -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ - volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ - volatile unsigned char RESERVED1[0x500]; /* Reserved area */ -}; -#else -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ - volatile unsigned char udata_bd1[0x200]; /* user, bds */ - volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ - volatile unsigned char udata_bd2[0x100]; /* user, bds */ - volatile unsigned char RESERVED1[0x400]; /* Reserved area */ -}; -#endif - - -/* - * internal ram - */ -typedef struct quicc { - union { - struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ - struct user_data u; - }ch_or_u; /* multipul or user space */ - - /* BASE + 0xc00: PARAMETER RAM */ - union { - struct scc_pram { - union { - struct hdlc_pram h; - struct uart_pram u; - struct bisync_pram b; - struct transparent_pram t; - unsigned char RESERVED66[0x70]; - } pscc; /* scc parameter area (protocol dependent) */ - union { - struct { - unsigned char RESERVED70[0x10]; - struct spi_pram spi; - unsigned char RESERVED72[0x8]; - struct timer_pram timer; - } timer_spi; - struct { - struct idma_pram idma; - unsigned char RESERVED67[0x4]; - union { - struct smc_uart_pram u; - struct smc_trnsp_pram t; - } psmc; - } idma_smc; - } pothers; - } scc; - struct ethernet_pram enet_scc; - struct global_multi_pram m; - unsigned char pr[0x100]; - } pram[4]; - - /* reserved */ - - /* BASE + 0x1000: INTERNAL REGISTERS */ - /* SIM */ - volatile unsigned long sim_mcr; /* module configuration reg */ - volatile unsigned short sim_simtr; /* module test register */ - volatile unsigned char RESERVED2[0x2]; /* Reserved area */ - volatile unsigned char sim_avr; /* auto vector reg */ - volatile unsigned char sim_rsr; /* reset status reg */ - volatile unsigned char RESERVED3[0x2]; /* Reserved area */ - volatile unsigned char sim_clkocr; /* CLCO control register */ - volatile unsigned char RESERVED62[0x3]; /* Reserved area */ - volatile unsigned short sim_pllcr; /* PLL control register */ - volatile unsigned char RESERVED63[0x2]; /* Reserved area */ - volatile unsigned short sim_cdvcr; /* Clock devider control register */ - volatile unsigned short sim_pepar; /* Port E pin assignment register */ - volatile unsigned char RESERVED64[0xa]; /* Reserved area */ - volatile unsigned char sim_sypcr; /* system protection control*/ - volatile unsigned char sim_swiv; /* software interrupt vector*/ - volatile unsigned char RESERVED6[0x2]; /* Reserved area */ - volatile unsigned short sim_picr; /* periodic interrupt control reg */ - volatile unsigned char RESERVED7[0x2]; /* Reserved area */ - volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ - volatile unsigned char RESERVED8[0x3]; /* Reserved area */ - volatile unsigned char sim_swsr; /* software service */ - volatile unsigned long sim_bkar; /* breakpoint address register*/ - volatile unsigned long sim_bkcr; /* breakpoint control register*/ - volatile unsigned char RESERVED10[0x8]; /* Reserved area */ - /* MEMC */ - volatile unsigned long memc_gmr; /* Global memory register */ - volatile unsigned short memc_mstat; /* MEMC status register */ - volatile unsigned char RESERVED11[0xa]; /* Reserved area */ - volatile unsigned long memc_br0; /* base register 0 */ - volatile unsigned long memc_or0; /* option register 0 */ - volatile unsigned char RESERVED12[0x8]; /* Reserved area */ - volatile unsigned long memc_br1; /* base register 1 */ - volatile unsigned long memc_or1; /* option register 1 */ - volatile unsigned char RESERVED13[0x8]; /* Reserved area */ - volatile unsigned long memc_br2; /* base register 2 */ - volatile unsigned long memc_or2; /* option register 2 */ - volatile unsigned char RESERVED14[0x8]; /* Reserved area */ - volatile unsigned long memc_br3; /* base register 3 */ - volatile unsigned long memc_or3; /* option register 3 */ - volatile unsigned char RESERVED15[0x8]; /* Reserved area */ - volatile unsigned long memc_br4; /* base register 3 */ - volatile unsigned long memc_or4; /* option register 3 */ - volatile unsigned char RESERVED16[0x8]; /* Reserved area */ - volatile unsigned long memc_br5; /* base register 3 */ - volatile unsigned long memc_or5; /* option register 3 */ - volatile unsigned char RESERVED17[0x8]; /* Reserved area */ - volatile unsigned long memc_br6; /* base register 3 */ - volatile unsigned long memc_or6; /* option register 3 */ - volatile unsigned char RESERVED18[0x8]; /* Reserved area */ - volatile unsigned long memc_br7; /* base register 3 */ - volatile unsigned long memc_or7; /* option register 3 */ - volatile unsigned char RESERVED9[0x28]; /* Reserved area */ - /* TEST */ - volatile unsigned short test_tstmra; /* master shift a */ - volatile unsigned short test_tstmrb; /* master shift b */ - volatile unsigned short test_tstsc; /* shift count */ - volatile unsigned short test_tstrc; /* repetition counter */ - volatile unsigned short test_creg; /* control */ - volatile unsigned short test_dreg; /* destributed register */ - volatile unsigned char RESERVED58[0x404]; /* Reserved area */ - /* IDMA1 */ - volatile unsigned short idma_iccr; /* channel configuration reg*/ - volatile unsigned char RESERVED19[0x2]; /* Reserved area */ - volatile unsigned short idma1_cmr; /* dma mode reg */ - volatile unsigned char RESERVED68[0x2]; /* Reserved area */ - volatile unsigned long idma1_sapr; /* dma source addr ptr */ - volatile unsigned long idma1_dapr; /* dma destination addr ptr */ - volatile unsigned long idma1_bcr; /* dma byte count reg */ - volatile unsigned char idma1_fcr; /* function code reg */ - volatile unsigned char RESERVED20; /* Reserved area */ - volatile unsigned char idma1_cmar; /* channel mask reg */ - volatile unsigned char RESERVED21; /* Reserved area */ - volatile unsigned char idma1_csr; /* channel status reg */ - volatile unsigned char RESERVED22[0x3]; /* Reserved area */ - /* SDMA */ - volatile unsigned char sdma_sdsr; /* status reg */ - volatile unsigned char RESERVED23; /* Reserved area */ - volatile unsigned short sdma_sdcr; /* configuration reg */ - volatile unsigned long sdma_sdar; /* address reg */ - /* IDMA2 */ - volatile unsigned char RESERVED69[0x2]; /* Reserved area */ - volatile unsigned short idma2_cmr; /* dma mode reg */ - volatile unsigned long idma2_sapr; /* dma source addr ptr */ - volatile unsigned long idma2_dapr; /* dma destination addr ptr */ - volatile unsigned long idma2_bcr; /* dma byte count reg */ - volatile unsigned char idma2_fcr; /* function code reg */ - volatile unsigned char RESERVED24; /* Reserved area */ - volatile unsigned char idma2_cmar; /* channel mask reg */ - volatile unsigned char RESERVED25; /* Reserved area */ - volatile unsigned char idma2_csr; /* channel status reg */ - volatile unsigned char RESERVED26[0x7]; /* Reserved area */ - /* Interrupt Controller */ - volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ - volatile unsigned long intr_cipr; /* CP interrupt pending reg */ - volatile unsigned long intr_cimr; /* CP interrupt mask reg */ - volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ - /* Parallel I/O */ - volatile unsigned short pio_padir; /* port A data direction reg */ - volatile unsigned short pio_papar; /* port A pin assignment reg */ - volatile unsigned short pio_paodr; /* port A open drain reg */ - volatile unsigned short pio_padat; /* port A data register */ - volatile unsigned char RESERVED28[0x8]; /* Reserved area */ - volatile unsigned short pio_pcdir; /* port C data direction reg*/ - volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ - volatile unsigned short pio_pcso; /* port C special options */ - volatile unsigned short pio_pcdat; /* port C data register */ - volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ - volatile unsigned char RESERVED29[0x16]; /* Reserved area */ - /* Timer */ - volatile unsigned short timer_tgcr; /* timer global configuration reg */ - volatile unsigned char RESERVED30[0xe]; /* Reserved area */ - volatile unsigned short timer_tmr1; /* timer 1 mode reg */ - volatile unsigned short timer_tmr2; /* timer 2 mode reg */ - volatile unsigned short timer_trr1; /* timer 1 referance reg */ - volatile unsigned short timer_trr2; /* timer 2 referance reg */ - volatile unsigned short timer_tcr1; /* timer 1 capture reg */ - volatile unsigned short timer_tcr2; /* timer 2 capture reg */ - volatile unsigned short timer_tcn1; /* timer 1 counter reg */ - volatile unsigned short timer_tcn2; /* timer 2 counter reg */ - volatile unsigned short timer_tmr3; /* timer 3 mode reg */ - volatile unsigned short timer_tmr4; /* timer 4 mode reg */ - volatile unsigned short timer_trr3; /* timer 3 referance reg */ - volatile unsigned short timer_trr4; /* timer 4 referance reg */ - volatile unsigned short timer_tcr3; /* timer 3 capture reg */ - volatile unsigned short timer_tcr4; /* timer 4 capture reg */ - volatile unsigned short timer_tcn3; /* timer 3 counter reg */ - volatile unsigned short timer_tcn4; /* timer 4 counter reg */ - volatile unsigned short timer_ter1; /* timer 1 event reg */ - volatile unsigned short timer_ter2; /* timer 2 event reg */ - volatile unsigned short timer_ter3; /* timer 3 event reg */ - volatile unsigned short timer_ter4; /* timer 4 event reg */ - volatile unsigned char RESERVED34[0x8]; /* Reserved area */ - /* CP */ - volatile unsigned short cp_cr; /* command register */ - volatile unsigned char RESERVED35[0x2]; /* Reserved area */ - volatile unsigned short cp_rccr; /* main configuration reg */ - volatile unsigned char RESERVED37; /* Reserved area */ - volatile unsigned char cp_rmds; /* development support status reg */ - volatile unsigned long cp_rmdr; /* development support control reg */ - volatile unsigned short cp_rctr1; /* ram break register 1 */ - volatile unsigned short cp_rctr2; /* ram break register 2 */ - volatile unsigned short cp_rctr3; /* ram break register 3 */ - volatile unsigned short cp_rctr4; /* ram break register 4 */ - volatile unsigned char RESERVED59[0x2]; /* Reserved area */ - volatile unsigned short cp_rter; /* RISC timers event reg */ - volatile unsigned char RESERVED38[0x2]; /* Reserved area */ - volatile unsigned short cp_rtmr; /* RISC timers mask reg */ - volatile unsigned char RESERVED39[0x14]; /* Reserved area */ - /* BRG */ - union { - volatile unsigned long l; - struct { - volatile unsigned short BRGC_RESERV:14; - volatile unsigned short rst:1; - volatile unsigned short en:1; - volatile unsigned short extc:2; - volatile unsigned short atb:1; - volatile unsigned short cd:12; - volatile unsigned short div16:1; - } b; - } brgc[4]; /* BRG1-BRG4 configuration regs*/ - /* SCC registers */ - struct scc_regs { - union { - struct { - /* Low word. */ - volatile unsigned short GSMR_RESERV2:1; - volatile unsigned short edge:2; - volatile unsigned short tci:1; - volatile unsigned short tsnc:2; - volatile unsigned short rinv:1; - volatile unsigned short tinv:1; - volatile unsigned short tpl:3; - volatile unsigned short tpp:2; - volatile unsigned short tend:1; - volatile unsigned short tdcr:2; - volatile unsigned short rdcr:2; - volatile unsigned short renc:3; - volatile unsigned short tenc:3; - volatile unsigned short diag:2; - volatile unsigned short enr:1; - volatile unsigned short ent:1; - volatile unsigned short mode:4; - /* High word. */ - volatile unsigned short GSMR_RESERV1:14; - volatile unsigned short pri:1; - volatile unsigned short gde:1; - volatile unsigned short tcrc:2; - volatile unsigned short revd:1; - volatile unsigned short trx:1; - volatile unsigned short ttx:1; - volatile unsigned short cdp:1; - volatile unsigned short ctsp:1; - volatile unsigned short cds:1; - volatile unsigned short ctss:1; - volatile unsigned short tfl:1; - volatile unsigned short rfw:1; - volatile unsigned short txsy:1; - volatile unsigned short synl:2; - volatile unsigned short rtsm:1; - volatile unsigned short rsyn:1; - } b; - struct { - volatile unsigned long low; - volatile unsigned long high; - } w; - } scc_gsmr; /* SCC general mode reg */ - volatile unsigned short scc_psmr; /* protocol specific mode reg */ - volatile unsigned char RESERVED42[0x2]; /* Reserved area */ - volatile unsigned short scc_todr; /* SCC transmit on demand */ - volatile unsigned short scc_dsr; /* SCC data sync reg */ - volatile unsigned short scc_scce; /* SCC event reg */ - volatile unsigned char RESERVED43[0x2];/* Reserved area */ - volatile unsigned short scc_sccm; /* SCC mask reg */ - volatile unsigned char RESERVED44[0x1];/* Reserved area */ - volatile unsigned char scc_sccs; /* SCC status reg */ - volatile unsigned char RESERVED45[0x8]; /* Reserved area */ - } scc_regs[4]; - /* SMC */ - struct smc_regs { - volatile unsigned char RESERVED46[0x2]; /* Reserved area */ - volatile unsigned short smc_smcmr; /* SMC mode reg */ - volatile unsigned char RESERVED60[0x2]; /* Reserved area */ - volatile unsigned char smc_smce; /* SMC event reg */ - volatile unsigned char RESERVED47[0x3]; /* Reserved area */ - volatile unsigned char smc_smcm; /* SMC mask reg */ - volatile unsigned char RESERVED48[0x5]; /* Reserved area */ - } smc_regs[2]; - /* SPI */ - volatile unsigned short spi_spmode; /* SPI mode reg */ - volatile unsigned char RESERVED51[0x4]; /* Reserved area */ - volatile unsigned char spi_spie; /* SPI event reg */ - volatile unsigned char RESERVED52[0x3]; /* Reserved area */ - volatile unsigned char spi_spim; /* SPI mask reg */ - volatile unsigned char RESERVED53[0x2]; /* Reserved area */ - volatile unsigned char spi_spcom; /* SPI command reg */ - volatile unsigned char RESERVED54[0x4]; /* Reserved area */ - /* PIP */ - volatile unsigned short pip_pipc; /* pip configuration reg */ - volatile unsigned char RESERVED65[0x2]; /* Reserved area */ - volatile unsigned short pip_ptpr; /* pip timing parameters reg */ - volatile unsigned long pip_pbdir; /* port b data direction reg */ - volatile unsigned long pip_pbpar; /* port b pin assignment reg */ - volatile unsigned long pip_pbodr; /* port b open drain reg */ - volatile unsigned long pip_pbdat; /* port b data reg */ - volatile unsigned char RESERVED71[0x18]; /* Reserved area */ - /* Serial Interface */ - volatile unsigned long si_simode; /* SI mode register */ - volatile unsigned char si_sigmr; /* SI global mode register */ - volatile unsigned char RESERVED55; /* Reserved area */ - volatile unsigned char si_sistr; /* SI status register */ - volatile unsigned char si_sicmr; /* SI command register */ - volatile unsigned char RESERVED56[0x4]; /* Reserved area */ - volatile unsigned long si_sicr; /* SI clock routing */ - volatile unsigned long si_sirp; /* SI ram pointers */ - volatile unsigned char RESERVED57[0xc]; /* Reserved area */ - volatile unsigned short si_siram[0x80]; /* SI routing ram */ -} QUICC; - -#endif - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h deleted file mode 100644 index d57217c..0000000 --- a/arch/m68knommu/include/asm/m68360_regs.h +++ /dev/null @@ -1,408 +0,0 @@ -/*********************************** - * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the QUICC registers - *************************************** - */ - -#ifndef __REGISTERS_H -#define __REGISTERS_H - -#define CLEAR_BIT(x, bit) x =bit - -/***************************************************************** - Command Register -*****************************************************************/ - -/* bit fields within command register */ -#define SOFTWARE_RESET 0x8000 -#define CMD_OPCODE 0x0f00 -#define CMD_CHANNEL 0x00f0 -#define CMD_FLAG 0x0001 - -/* general command opcodes */ -#define INIT_RXTX_PARAMS 0x0000 -#define INIT_RX_PARAMS 0x0100 -#define INIT_TX_PARAMS 0x0200 -#define ENTER_HUNT_MODE 0x0300 -#define STOP_TX 0x0400 -#define GR_STOP_TX 0x0500 -#define RESTART_TX 0x0600 -#define CLOSE_RX_BD 0x0700 -#define SET_ENET_GROUP 0x0800 -#define RESET_ENET_GROUP 0x0900 - -/* quicc32 CP commands */ -#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ -#define ENTER_HUNT_MODE_32 0x1e00 - -/* quicc32 mask/event SCC register */ -#define GOV 0x01 -#define GUN 0x02 -#define GINT 0x04 -#define IQOV 0x08 - - -/* Timer commands */ -#define SET_TIMER 0x0800 - -/* Multi channel Interrupt structure */ -#define INTR_VALID 0x8000 /* Valid interrupt entry */ -#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ -#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ -#define INTR_MASK_BITS 0x383f - -/* - * General SCC mode register (GSMR) - */ - -#define MODE_HDLC 0x0 -#define MODE_APPLE_TALK 0x2 -#define MODE_SS7 0x3 -#define MODE_UART 0x4 -#define MODE_PROFIBUS 0x5 -#define MODE_ASYNC_HDLC 0x6 -#define MODE_V14 0x7 -#define MODE_BISYNC 0x8 -#define MODE_DDCMP 0x9 -#define MODE_MULTI_CHANNEL 0xa -#define MODE_ETHERNET 0xc - -#define DIAG_NORMAL 0x0 -#define DIAG_LOCAL_LPB 0x1 -#define DIAG_AUTO_ECHO 0x2 -#define DIAG_LBP_ECHO 0x3 - -/* For RENC and TENC fields in GSMR */ -#define ENC_NRZ 0x0 -#define ENC_NRZI 0x1 -#define ENC_FM0 0x2 -#define ENC_MANCH 0x4 -#define ENC_DIFF_MANC 0x6 - -/* For TDCR and RDCR fields in GSMR */ -#define CLOCK_RATE_1 0x0 -#define CLOCK_RATE_8 0x1 -#define CLOCK_RATE_16 0x2 -#define CLOCK_RATE_32 0x3 - -#define TPP_00 0x0 -#define TPP_10 0x1 -#define TPP_01 0x2 -#define TPP_11 0x3 - -#define TPL_NO 0x0 -#define TPL_8 0x1 -#define TPL_16 0x2 -#define TPL_32 0x3 -#define TPL_48 0x4 -#define TPL_64 0x5 -#define TPL_128 0x6 - -#define TSNC_INFINITE 0x0 -#define TSNC_14_65 0x1 -#define TSNC_4_15 0x2 -#define TSNC_3_1 0x3 - -#define EDGE_BOTH 0x0 -#define EDGE_POS 0x1 -#define EDGE_NEG 0x2 -#define EDGE_NO 0x3 - -#define SYNL_NO 0x0 -#define SYNL_4 0x1 -#define SYNL_8 0x2 -#define SYNL_16 0x3 - -#define TCRC_CCITT16 0x0 -#define TCRC_CRC16 0x1 -#define TCRC_CCITT32 0x2 - - -/***************************************************************** - TODR (Transmit on demand) Register -*****************************************************************/ -#define TODR_TOD 0x8000 /* Transmit on demand */ - - -/***************************************************************** - CICR register settings -*****************************************************************/ - -/* note that relative irq priorities of the SCCs can be reordered - * if desired - see p. 7-377 of the MC68360UM */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ - -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - - -/***************************************************************** - Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) -*****************************************************************/ - -#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ -#define INTR_SCC1 0x40000000 /* SCC port 1 */ -#define INTR_SCC2 0x20000000 /* SCC port 2 */ -#define INTR_SCC3 0x10000000 /* SCC port 3 */ -#define INTR_SCC4 0x08000000 /* SCC port 4 */ -#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ -#define INTR_TIMER1 0x02000000 /* timer 1 */ -#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ -#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ -#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ -#define INTR_DMA1 0x00200000 /* idma 1 */ -#define INTR_DMA2 0x00100000 /* idma 2 */ -#define INTR_TIMER2 0x00040000 /* timer 2 */ -#define INTR_CP_TIMER 0x00020000 /* CP timer */ -#define INTR_PIP_STATUS 0x00010000 /* PIP status */ -#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ -#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ -#define INTR_TIMER3 0x00001000 /* timer 3 */ -#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ -#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ -#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ -#define INTR_TIMER4 0x00000080 /* timer 4 */ -#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ -#define INTR_SCP 0x00000020 /* SCP */ -#define INTR_SMC1 0x00000010 /* SMC 1 */ -#define INTR_SMC2 0x00000008 /* SMC 2 */ -#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ -#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ -#define INTR_ERR 0x00000001 /* error */ - - -/***************************************************************** - CPM Interrupt vector encodings (MC68360UM p. 7-376) -*****************************************************************/ - -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC0 0x1f -#define CPMVEC_SCC1 0x1e -#define CPMVEC_SCC2 0x1d -#define CPMVEC_SCC3 0x1c -#define CPMVEC_SCC4 0x1b -#define CPMVEC_PIO_PC1 0x1a -#define CPMVEC_TIMER1 0x19 -#define CPMVEC_PIO_PC2 0x18 -#define CPMVEC_PIO_PC3 0x17 -#define CPMVEC_SDMA_CB_ERR 0x16 -#define CPMVEC_IDMA1 0x15 -#define CPMVEC_IDMA2 0x14 -#define CPMVEC_RESERVED3 0x13 -#define CPMVEC_TIMER2 0x12 -#define CPMVEC_RISCTIMER 0x11 -#define CPMVEC_RESERVED2 0x10 -#define CPMVEC_PIO_PC4 0x0f -#define CPMVEC_PIO_PC5 0x0e -#define CPMVEC_TIMER3 0x0c -#define CPMVEC_PIO_PC6 0x0b -#define CPMVEC_PIO_PC7 0x0a -#define CPMVEC_PIO_PC8 0x09 -#define CPMVEC_RESERVED1 0x08 -#define CPMVEC_TIMER4 0x07 -#define CPMVEC_PIO_PC9 0x06 -#define CPMVEC_SPI 0x05 -#define CPMVEC_SMC1 0x04 -#define CPMVEC_SMC2 0x03 -#define CPMVEC_PIO_PC10 0x02 -#define CPMVEC_PIO_PC11 0x01 -#define CPMVEC_ERROR 0x00 - -/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ -/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - - -/***************************************************************** - * PIO control registers - *****************************************************************/ - -/* Port A - See 360UM p. 7-358 - * - * Note that most of these pins have alternate functions - */ - - -/* The macros are nice, but there are all sorts of references to 1-indexed - * facilities on the 68360... */ -/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ -/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ - -#define PA_RXD1 ((ushort)0x0001) -#define PA_TXD1 ((ushort)0x0002) -#define PA_RXD2 ((ushort)0x0004) -#define PA_TXD2 ((ushort)0x0008) -#define PA_RXD3 ((ushort)0x0010) -#define PA_TXD3 ((ushort)0x0020) -#define PA_RXD4 ((ushort)0x0040) -#define PA_TXD4 ((ushort)0x0080) - -#define PA_CLK1 ((ushort)0x0100) -#define PA_CLK2 ((ushort)0x0200) -#define PA_CLK3 ((ushort)0x0400) -#define PA_CLK4 ((ushort)0x0800) -#define PA_CLK5 ((ushort)0x1000) -#define PA_CLK6 ((ushort)0x2000) -#define PA_CLK7 ((ushort)0x4000) -#define PA_CLK8 ((ushort)0x8000) - - -/* Port B - See 360UM p. 7-362 - */ - - -/* Port C - See 360UM p. 7-365 - */ - -#define PC_RTS1 ((ushort)0x0001) -#define PC_RTS2 ((ushort)0x0002) -#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ -#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ - -#define PC_CTS1 ((ushort)0x0010) -#define PC_CD1 ((ushort)0x0020) -#define PC_CTS2 ((ushort)0x0040) -#define PC_CD2 ((ushort)0x0080) -#define PC_CTS3 ((ushort)0x0100) -#define PC_CD3 ((ushort)0x0200) -#define PC_CTS4 ((ushort)0x0400) -#define PC_CD4 ((ushort)0x0800) - - - -/***************************************************************** - chip select option register -*****************************************************************/ -#define DTACK 0xe000 -#define ADR_MASK 0x1ffc -#define RDWR_MASK 0x0002 -#define FC_MASK 0x0001 - -/***************************************************************** - tbase and rbase registers -*****************************************************************/ -#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) -#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) -#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) -#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) -#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define INCREASE_TBD(bd,quicc,pram) { \ - if((bd)->status & T_W) \ - (bd) = TBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD(bd,quicc,pram) { \ - if ((bd) == TBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD(bd,quicc,pram) { \ - if((bd)->status & R_W) \ - (bd) = RBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD(bd,quicc,pram) { \ - if ((bd) == RBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -/***************************************************************** - Macros for Multi channel -*****************************************************************/ -#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) -#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) -#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ - (&(quicc->ch_or_u.ch_pram_tbl[channel]))) -#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) -#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) -#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) -#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) -#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) -#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) - -#define INCREASE_TBD_32(bd,quicc,page,channel) { \ - if((bd)->status & T_W) \ - (bd) = TBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD_32(bd,quicc,page,channel) { \ - if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD_32(bd,quicc,page,channel) { \ - if((bd)->status & R_W) \ - (bd) = RBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD_32(bd,quicc,page,channel) { \ - if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -#endif diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h deleted file mode 100644 index de9f47a..0000000 --- a/arch/m68knommu/include/asm/machdep.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_MACHDEP_H -#define _M68KNOMMU_MACHDEP_H - -#include - -/* Hardware clock functions */ -extern void hw_timer_init(void); -extern unsigned long hw_timer_offset(void); - -extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); - -/* Machine dependent time handling */ -extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, - int *min, int *sec); -extern int (*mach_set_clock_mmss)(unsigned long); - -/* machine dependent power off functions */ -extern void (*mach_reset)( void ); -extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); - -extern void config_BSP(char *command, int len); - -extern void do_IRQ(int irq, struct pt_regs *fp); - -#endif /* _M68KNOMMU_MACHDEP_H */ diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h deleted file mode 100644 index 7e70905..0000000 --- a/arch/m68knommu/include/asm/math-emu.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h deleted file mode 100644 index 907a0481..0000000 --- a/arch/m68knommu/include/asm/mc146818rtc.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _M68KNOMMU_MC146818RTC_H -#define _M68KNOMMU_MC146818RTC_H - -/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ - -#endif /* _M68KNOMMU_MC146818RTC_H */ diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h deleted file mode 100644 index c042634..0000000 --- a/arch/m68knommu/include/asm/mcfcache.h +++ /dev/null @@ -1,150 +0,0 @@ -/****************************************************************************/ - -/* - * mcfcache.h -- ColdFire CPU cache support code - * - * (C) Copyright 2004, Greg Ungerer - */ - -/****************************************************************************/ -#ifndef __M68KNOMMU_MCFCACHE_H -#define __M68KNOMMU_MCFCACHE_H -/****************************************************************************/ - - -/* - * The different ColdFire families have different cache arrangments. - * Everything from a small instruction only cache, to configurable - * data and/or instruction cache, to unified instruction/data, to - * harvard style separate instruction and data caches. - */ - -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) -/* - * Simple version 2 core cache. These have instruction cache only, - * we just need to invalidate it and enable it. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - movel #0x80000100,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ -.endm -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) -/* - * New version 2 cores have a configurable split cache arrangement. - * For now I am just enabling instruction cache - but ultimately I - * think a split instruction/data cache would be better. - */ -.macro CACHE_ENABLE - movel #0x01400000,%d0 - movec %d0,%CACR /* invalidate cache */ - nop - movel #0x0000c000,%d0 /* set SDRAM cached only */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80400100,%d0 /* configure cache */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M523x || CONFIG_M527x */ - -#if defined(CONFIG_M528x) -.macro CACHE_ENABLE - nop - movel #0x01000000, %d0 - movec %d0, %CACR /* Invalidate cache */ - nop - movel #0x0000c020, %d0 /* Set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000, %d0 /* No other regions cached */ - movec %d0, %ACR1 - movel #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop -.endm -#endif /* CONFIG_M528x */ - -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) -/* - * The version 3 core cache. Oddly enough the version 2 core 5249 - * has the same SDRAM and cache setup as the version 3 cores. - * This is a single unified instruction/data cache. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop -#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) - movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ -#else - movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ -#endif - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0xa0000200,%d0 /* enable cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5249 || CONFIG_M5307 */ - -#if defined(CONFIG_M532x) -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - nop - movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80000200,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M532x */ - -#if defined(CONFIG_M5407) -/* - * Version 4 cores have a true harvard style separate instruction - * and data cache. Invalidate and enable cache, also enable write - * buffers and branch accelerator. - */ -.macro CACHE_ENABLE - movel #0x01040100,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR1 - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR2 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR3 - movel #0xb6088400,%d0 /* enable caches */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5407 */ - -#if defined(CONFIG_M520x) -.macro CACHE_ENABLE - move.l #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - move.l #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - move.l #0x80400000,%d0 /* enable 8K instruction cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M520x */ - -/****************************************************************************/ -#endif /* __M68KNOMMU_MCFCACHE_H */ diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h deleted file mode 100644 index 705c52c..0000000 --- a/arch/m68knommu/include/asm/mcfdma.h +++ /dev/null @@ -1,144 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdma.h -- Coldfire internal DMA support defines. - * - * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) - */ - -/****************************************************************************/ -#ifndef mcfdma_h -#define mcfdma_h -/****************************************************************************/ - - -/* - * Get address specific defines for this Coldfire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ -#elif defined(CONFIG_M5272) -#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -/* These are relative to the IPSBAR, not MBAR */ -#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ -#endif - - -#if !defined(CONFIG_M5272) - -/* - * Define the DMA register set addresses. - * Note: these are longword registers, use unsigned long as data type - */ -#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ -#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ -/* these are word registers, use unsigned short data type */ -#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ -#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ -/* these are byte registers, use unsiged char data type */ -#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ -#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ - -/* - * Bit definitions for the DMA Control Register (DCR). - */ -#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ -#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ -#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ -#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ -#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ -#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ -#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ -#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ -#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ -#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ -#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ -#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ -#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ -#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ -#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ -#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ -#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ -#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ -#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ -#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ -#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ -#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ -#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ -#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ -#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ -#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ -#define MCFDMA_DCR_START 0x0001 /* Start transfer */ - -/* - * Bit definitions for the DMA Status Register (DSR). - */ -#define MCFDMA_DSR_CE 0x40 /* Config error */ -#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ -#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ -#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ -#define MCFDMA_DSR_BSY 0x02 /* Busy */ -#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ - -#else /* This is an MCF5272 */ - -#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ -#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ -#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ -#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ -#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ - -/* Bit definitions for the DMA Mode Register (DMR) */ -#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ -#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ -#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ -#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ -#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ -#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ -#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ -#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ -#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ -#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ -#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ -#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ -#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ -#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ -#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ -#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ -#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ -#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ -#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ -#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ -#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ -#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ -#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ -#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ -#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ -#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ -#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ -#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ - -/* Bit definitions for the DMA interrupt register (DIR) */ -#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ -#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ -#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ -#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ -#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ -#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ -#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ -#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ - -#endif /* !defined(CONFIG_M5272) */ - -/****************************************************************************/ -#endif /* mcfdma_h */ diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h deleted file mode 100644 index 319899c..0000000 --- a/arch/m68knommu/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h deleted file mode 100644 index 431f63a..0000000 --- a/arch/m68knommu/include/asm/mcfne.h +++ /dev/null @@ -1,325 +0,0 @@ -/****************************************************************************/ - -/* - * mcfne.h -- NE2000 in ColdFire eval boards. - * - * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 2001, SnapGear (www.snapgear.com) - * - * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board - * - * Hacked support for m5206e Cadre III evaluation board - * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 - */ - -/****************************************************************************/ -#ifndef mcfne_h -#define mcfne_h -/****************************************************************************/ - - -/* - * Support for NE2000 clones devices in ColdFire based boards. - * Not all boards address these parts the same way, some use a - * direct addressing method, others use a side-band address space - * to access odd address registers, some require byte swapping - * others do not. - */ -#define BSWAP(w) (((w) << 8) | ((w) >> 8)) -#define RSWAP(w) (w) - - -/* - * Define the basic hardware resources of NE2000 boards. - */ - -#if defined(CONFIG_ARN5206) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0xf0 -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206eC3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1c -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30000300 -#define NE2000_IRQ_VECTOR 25 -#define NE2000_IRQ_PRIORITY 1 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned char -#endif - -#if defined(CONFIG_M5307C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 67 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_NETtel) -#define NE2000_ADDR0 0x30600300 -#define NE2000_ADDR1 0x30800300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR0 27 -#define NE2000_IRQ_VECTOR1 29 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 27 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_ARN5307) -#define NE2000_ADDR 0xfe600300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5407C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -/****************************************************************************/ - -/* - * Side-band address space for odd address requires re-mapping - * many of the standard ISA access functions. - */ -#ifdef NE2000_ODDOFFSET - -#undef outb -#undef outb_p -#undef inb -#undef inb_p -#undef outsb -#undef outsw -#undef insb -#undef insw - -#define outb ne2000_outb -#define inb ne2000_inb -#define outb_p ne2000_outb -#define inb_p ne2000_inb -#define outsb ne2000_outsb -#define outsw ne2000_outsw -#define insb ne2000_insb -#define insw ne2000_insw - - -#ifndef COLDFIRE_NE2000_FUNCS - -void ne2000_outb(unsigned int val, unsigned int addr); -int ne2000_inb(unsigned int addr); -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); - -#else - -/* - * This macro converts a conventional register address into the - * real memory pointer of the mapped NE2000 device. - * On most NE2000 implementations on ColdFire boards the chip is - * mapped in kinda funny, due to its ISA heritage. - */ -#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) -#define NE2000_DATA_PTR(addr) (addr) - - -void ne2000_outb(unsigned int val, unsigned int addr) -{ - NE2000_BYTE *rp; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - *rp = RSWAP(val); -} - -int ne2000_inb(unsigned int addr) -{ - NE2000_BYTE *rp, val; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - val = *rp; - return((int) ((NE2000_BYTE) RSWAP(val))); -} - -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *rp; - *buf++ = RSWAP(val); - } -} - -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *rp; - *buf++ = BSWAP(w); - } -} - -void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *buf++; - *rp = RSWAP(val); - } -} - -void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *buf++; - *rp = BSWAP(w); - } -} - -#endif /* COLDFIRE_NE2000_FUNCS */ -#endif /* NE2000_OFFOFFSET */ - -/****************************************************************************/ - -#ifdef COLDFIRE_NE2000_FUNCS - -/* - * Lastly the interrupt set up code... - * Minor differences between the different board types. - */ - -#if defined(CONFIG_ARN5206) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206eC3) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - mcf_autovector(irq); -} -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - volatile unsigned long *icrp; - volatile unsigned long *pitr; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77077777) | 0x00d00000; - - pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); - *pitr = *pitr | 0x20000000; -} - -void ne2000_irqack(int irq) -{ - volatile unsigned long *icrp; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77777777) | 0x00800000; -} -#endif - -#if defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); - mcf_autovector(irq); -} - -#else - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); -} - -#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ -#endif /* CONFIG_M5307 || CONFIG_M5407 */ - -#endif /* COLDFIRE_NE2000_FUNCS */ - -/****************************************************************************/ -#endif /* mcfne_h */ diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h deleted file mode 100644 index f1507dd..0000000 --- a/arch/m68knommu/include/asm/mcfpci.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpci.h -- PCI bridge on ColdFire eval boards. - * - * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfpci_h -#define mcfpci_h -/****************************************************************************/ - - -#ifdef CONFIG_PCI - -/* - * Address regions in the PCI address space are not mapped into the - * normal memory space of the ColdFire. They must be accessed via - * handler routines. This is easy for I/O space (inb/outb/etc) but - * needs some code changes to support ordinary memory. Interrupts - * also need to be vectored through the PCI handler first, then it - * will call the actual driver sub-handlers. - */ - -/* - * Un-define all the standard I/O access routines. - */ -#undef inb -#undef inw -#undef inl -#undef inb_p -#undef inw_p -#undef insb -#undef insw -#undef insl -#undef outb -#undef outw -#undef outl -#undef outb_p -#undef outw_p -#undef outsb -#undef outsw -#undef outsl - -#undef request_irq -#undef free_irq - -#undef bus_to_virt -#undef virt_to_bus - - -/* - * Re-direct all I/O memory accesses functions to PCI specific ones. - */ -#define inb pci_inb -#define inw pci_inw -#define inl pci_inl -#define inb_p pci_inb -#define inw_p pci_inw -#define insb pci_insb -#define insw pci_insw -#define insl pci_insl - -#define outb pci_outb -#define outw pci_outw -#define outl pci_outl -#define outb_p pci_outb -#define outw_p pci_outw -#define outsb pci_outsb -#define outsw pci_outsw -#define outsl pci_outsl - -#define request_irq pci_request_irq -#define free_irq pci_free_irq - -#define virt_to_bus pci_virt_to_bus -#define bus_to_virt pci_bus_to_virt - -#define CONFIG_COMEMPCI 1 - - -/* - * Prototypes of the real PCI functions (defined in bios32.c). - */ -unsigned char pci_inb(unsigned int addr); -unsigned short pci_inw(unsigned int addr); -unsigned int pci_inl(unsigned int addr); -void pci_insb(void *addr, void *buf, int len); -void pci_insw(void *addr, void *buf, int len); -void pci_insl(void *addr, void *buf, int len); - -void pci_outb(unsigned char val, unsigned int addr); -void pci_outw(unsigned short val, unsigned int addr); -void pci_outl(unsigned int val, unsigned int addr); -void pci_outsb(void *addr, void *buf, int len); -void pci_outsw(void *addr, void *buf, int len); -void pci_outsl(void *addr, void *buf, int len); - -int pci_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, - const char *device, - void *dev_id); -void pci_free_irq(unsigned int irq, void *dev_id); - -void *pci_bmalloc(int size); -void pci_bmfree(void *bmp, int len); -void pci_copytoshmem(unsigned long bmp, void *src, int size); -void pci_copyfromshmem(void *dst, unsigned long bmp, int size); -unsigned long pci_virt_to_bus(volatile void *address); -void *pci_bus_to_virt(unsigned long address); -void pci_bmcpyto(void *dst, void *src, int len); -void pci_bmcpyfrom(void *dst, void *src, int len); - -#endif /* CONFIG_PCI */ -/****************************************************************************/ -#endif /* mcfpci_h */ diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h deleted file mode 100644 index f570cf6..0000000 --- a/arch/m68knommu/include/asm/mcfpit.h +++ /dev/null @@ -1,64 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpit.h -- ColdFire internal PIT timer support defines. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef mcfpit_h -#define mcfpit_h -/****************************************************************************/ - - -/* - * Get address specific defines for the 5270/5271, 5280/5282, and 5208. - */ -#if defined(CONFIG_M520x) -#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ -#else -#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ -#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ -#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ -#endif - -/* - * Define the PIT timer register set addresses. - */ -#define MCFPIT_PCSR 0x0 /* PIT control register */ -#define MCFPIT_PMR 0x2 /* PIT modulus register */ -#define MCFPIT_PCNTR 0x4 /* PIT count register */ - -/* - * Bit definitions for the PIT Control and Status register. - */ -#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ -#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ -#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ -#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ -#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ -#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ -#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ -#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ -#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ -#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ -#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ -#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ -#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ -#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ - -/****************************************************************************/ -#endif /* mcfpit_h */ diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h deleted file mode 100644 index da3f2ce..0000000 --- a/arch/m68knommu/include/asm/mcfsim.h +++ /dev/null @@ -1,126 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsim.h -- ColdFire System Integration Module support. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsim_h -#define mcfsim_h -/****************************************************************************/ - - -/* - * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, - * 5307 or 5407 specific addresses. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#include -#elif defined(CONFIG_M520x) -#include -#elif defined(CONFIG_M523x) -#include -#elif defined(CONFIG_M5249) -#include -#elif defined(CONFIG_M527x) -#include -#elif defined(CONFIG_M5272) -#include -#elif defined(CONFIG_M528x) -#include -#elif defined(CONFIG_M5307) -#include -#elif defined(CONFIG_M532x) -#include -#elif defined(CONFIG_M5407) -#include -#endif - - -/* - * Define the base address of the SIM within the MBAR address space. - */ -#define MCFSIM_BASE 0x0 /* Base address of SIM */ - - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Bit definitions for the Interrupt Mask register (IMR). - */ -#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ - -#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) -#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ -#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ -#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ -#endif - -/* - * Mask for all of the SIM devices. Some parts have more or less - * SIM devices. This is a catchall for the sandard set. - */ -#ifndef MCFSIM_IMR_MASKALL -#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -#endif - - -/* - * PIT interrupt settings, if not found in mXXXXsim.h file. - */ -#ifndef ICR_INTRCONF -#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -#endif -#ifndef MCFPIT_IMR -#define MCFPIT_IMR MCFINTC_IMRH -#endif -#ifndef MCFPIT_IMR_IBIT -#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -#endif - - -#ifndef __ASSEMBLY__ -/* - * Definition for the interrupt auto-vectoring support. - */ -extern void mcf_autovector(unsigned int vec); -#endif /* __ASSEMBLY__ */ - -/****************************************************************************/ -#endif /* mcfsim_h */ diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h deleted file mode 100644 index 2d7a4db..0000000 --- a/arch/m68knommu/include/asm/mcfsmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsmc.h -- SMC ethernet support for ColdFire environments. - * - * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsmc_h -#define mcfsmc_h -/****************************************************************************/ - -/* - * None of the current ColdFire targets that use the SMC91x111 - * allow 8 bit accesses. So this code is 16bit access only. - */ - - -#undef outb -#undef inb -#undef outw -#undef outwd -#undef inw -#undef outl -#undef inl - -#undef outsb -#undef outsw -#undef outsl -#undef insb -#undef insw -#undef insl - -/* - * Re-defines for ColdFire environment... The SMC part is - * mapped into memory space, so remap the PC-style in/out - * routines to handle that. - */ -#define outb smc_outb -#define inb smc_inb -#define outw smc_outw -#define outwd smc_outwd -#define inw smc_inw -#define outl smc_outl -#define inl smc_inl - -#define outsb smc_outsb -#define outsw smc_outsw -#define outsl smc_outsl -#define insb smc_insb -#define insw smc_insw -#define insl smc_insl - - -static inline int smc_inb(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) (addr & ~0x1)); - return(((addr & 0x1) ? w : (w >> 8)) & 0xff); -} - -static inline void smc_outw(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); -} - -static inline int smc_inw(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) addr); - return(((w << 8) | (w >> 8)) & 0xffff); -} - -static inline void smc_outl(unsigned long val, unsigned int addr) -{ - *((volatile unsigned long *) addr) = - ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | - ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); -} - -static inline void smc_outwd(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = val; -} - - -/* - * The rep* functions are used to feed the data port with - * raw data. So we do not byte swap them when copying. - */ - -static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - - /* Copy as words for as long as possible */ - for (ebuf = buf + (len >> 1); (buf < ebuf); ) - *buf++ = *rp; - - /* Lastly, handle left over byte */ - if (len & 0x1) - *((unsigned char *) buf) = (*rp >> 8) & 0xff; -} - -static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - -static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - - -#ifdef CONFIG_NETtel -/* - * Re-map the address space of at least one of the SMC ethernet - * parts. Both parts power up decoding the same address, so we - * need to move one of them first, before doing enything else. - * - * We also increase the number of wait states for this part by one. - */ - -void smc_remap(unsigned int ioaddr) -{ - static int once = 0; - extern unsigned short ppdata; - if (once++ == 0) { - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; - ppdata |= 0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0067, ioaddr + BASE); - - ppdata &= ~0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - } - - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; -} - -#endif - -/****************************************************************************/ -#endif /* mcfsmc_h */ diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h deleted file mode 100644 index 0f90f6d..0000000 --- a/arch/m68knommu/include/asm/mcftimer.h +++ /dev/null @@ -1,80 +0,0 @@ -/****************************************************************************/ - -/* - * mcftimer.h -- ColdFire internal TIMER support defines. - * - * (C) Copyright 1999-2006, Greg Ungerer - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcftimer_h -#define mcftimer_h -/****************************************************************************/ - - -/* - * Get address specific defines for this ColdFire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ -#elif defined(CONFIG_M532x) -#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ -#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ -#endif - - -/* - * Define the TIMER register set addresses. - */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M532x) -#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ -#else -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ -#endif - -/* - * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. - */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ - -/* - * Bit definitions for the Timer Event Registers (TER). - */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ - -/****************************************************************************/ -#endif /* mcftimer_h */ diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h deleted file mode 100644 index ef22938..0000000 --- a/arch/m68knommu/include/asm/mcfuart.h +++ /dev/null @@ -1,216 +0,0 @@ -/****************************************************************************/ - -/* - * mcfuart.h -- ColdFire internal UART support defines. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfuart_h -#define mcfuart_h -/****************************************************************************/ - -/* - * Define the base address of the UARTS within the MBAR address - * space. - */ -#if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M520x) -#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ -#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ -#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ -#elif defined(CONFIG_M532x) -#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ -#endif - - -#include -#include - -struct mcf_platform_uart { - unsigned long mapbase; /* Physical address base */ - void __iomem *membase; /* Virtual address if mapped */ - unsigned int irq; /* Interrupt vector */ - unsigned int uartclk; /* UART clock rate */ -}; - -/* - * Define the ColdFire UART register set addresses. - */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrupt Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ -#ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ -#endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ - - -/* - * Define bit flags in Mode Register 1 (MR1). - */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ - -/* - * Define bit flags in Mode Register 2 (MR2). - */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ - -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ - -/* - * Define bit flags in Status Register (USR). - */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ - -#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ - MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) - -/* - * Define bit flags in Clock Select Register (UCSR). - */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ - -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ - -/* - * Define bit flags in Command Register (UCR). - */ -#define MCFUART_UCR_CMDNULL 0x00 /* No command */ -#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ -#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ -#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ -#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ -#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ -#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ -#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ - -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ - -/* - * Define bit flags in Input Port Change Register (UIPCR). - */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Input Port Register (UIP). - */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Output Port Registers (UOP). - * Clear bit by writing to UOP0, set by writing to UOP1. - */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ - -/* - * Define bit flags in the Auxiliary Control Register (UACR). - */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ - -/* - * Define bit flags in Interrupt Status Register (UISR). - * These same bits are used for the Interrupt Mask Register (UIMR). - */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ - -#ifdef CONFIG_M5272 -/* - * Define bit flags in the Transmitter FIFO Register (UTF). - */ -#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ - -/* - * Define bit flags in the Receiver FIFO Register (URF). - */ -#define MCFUART_URF_RXB 0x1f /* Receiver data level */ -#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* Receiver status */ -#endif - -/****************************************************************************/ -#endif /* mcfuart_h */ diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h deleted file mode 100644 index 27f70e4..0000000 --- a/arch/m68knommu/include/asm/mcfwdebug.h +++ /dev/null @@ -1,118 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdebug.h -- ColdFire Debug Module support. - * - * (C) Copyright 2001, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfdebug_h -#define mcfdebug_h -/****************************************************************************/ - -/* Define the debug module registers */ -#define MCFDEBUG_CSR 0x0 /* Configuration status */ -#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ -#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ -#define MCFDEBUG_TDR 0x7 /* Trigger definition */ -#define MCFDEBUG_PBR 0x8 /* PC breakpoint */ -#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ -#define MCFDEBUG_ABHR 0xc /* High address breakpoint */ -#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ -#define MCFDEBUG_DBR 0xe /* Data breakpoint */ -#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ - -/* Define some handy constants for the trigger definition register */ -#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ -#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ -#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ -#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ -#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ -#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ -#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ -#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ -#define MCFDEBUG_TDR_EDLW2 0x10000000 -#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ -#define MCFDEBUG_TDR_EDWL2 0x08000000 -#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ -#define MCFDEBUG_TDR_EDWU2 0x04000000 -#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ -#define MCFDEBUG_TDR_EDLL2 0x02000000 -#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ -#define MCFDEBUG_TDR_EDLM2 0x01000000 -#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ -#define MCFDEBUG_TDR_EDUM2 0x00800000 -#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ -#define MCFDEBUG_TDR_EDUU2 0x00400000 -#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ -#define MCFDEBUG_TDR_DI2 0x00200000 -#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ -#define MCFDEBUG_TDR_EAI2 0x00100000 -#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ -#define MCFDEBUG_TDR_EAR2 0x00080000 -#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ -#define MCFDEBUG_TDR_EAL2 0x00040000 -#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ -#define MCFDEBUG_TDR_EPC2 0x00020000 -#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ -#define MCFDEBUG_TDR_PCI2 0x00010000 - -/* Constants for the address attribute trigger register */ -#define MCFDEBUG_AAR_RESET 0x00000005 -/* Fields not yet implemented */ - -/* And some definitions for the writable sections of the CSR */ -#define MCFDEBUG_CSR_RESET 0x00100000 -#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ -#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ -#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ -#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ -#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ -#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ -#define MCFDEBUG_CSR_DDC_WRITE 0x00001000 -#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ -#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ -#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ -#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ -#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ -#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ -#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ - -/* Constants for the BDM address attribute register */ -#define MCFDEBUG_BAAR_RESET 0x00000005 -/* Fields not yet implemented */ - - -/* This routine wrappers up the wdebug asm instruction so that the register - * and value can be relatively easily specified. The biggest hassle here is - * that the debug module instructions (2 longs) must be long word aligned and - * some pointer fiddling is performed to ensure this. - */ -static inline void wdebug(int reg, unsigned long data) { - unsigned short dbg_spc[6]; - unsigned short *dbg; - - // Force alignment to long word boundary - dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); - - // Build up the debug instruction - dbg[0] = 0x2c80 | (reg & 0xf); - dbg[1] = (data >> 16) & 0xffff; - dbg[2] = data & 0xffff; - dbg[3] = 0; - - // Perform the wdebug instruction -#if 0 - // This strain is for gas which doesn't have the wdebug instructions defined - asm( "move.l %0, %%a0\n\t" - ".word 0xfbd0\n\t" - ".word 0x0003\n\t" - :: "g" (dbg) : "a0"); -#else - // And this is for when it does - asm( "wdebug (%0)" :: "a" (dbg)); -#endif -} - -#endif diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h deleted file mode 100644 index d810c78..0000000 --- a/arch/m68knommu/include/asm/md.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h deleted file mode 100644 index 4846c68..0000000 --- a/arch/m68knommu/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h deleted file mode 100644 index e2da1e6..0000000 --- a/arch/m68knommu/include/asm/mmu.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __M68KNOMMU_MMU_H -#define __M68KNOMMU_MMU_H - -/* Copyright (C) 2002, David McCullough */ - -typedef struct { - unsigned long end_brk; -} mm_context_t; - -#endif /* __M68KNOMMU_MMU_H */ diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h deleted file mode 100644 index 9ccee42..0000000 --- a/arch/m68knommu/include/asm/mmu_context.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __M68KNOMMU_MMU_CONTEXT_H -#define __M68KNOMMU_MMU_CONTEXT_H - -#include -#include -#include -#include - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - // mm->context = virt_to_phys(mm->pgd); - return(0); -} - -#define destroy_context(mm) do { } while(0) - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ -} - -#endif diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h deleted file mode 100644 index 2e45ab5..0000000 --- a/arch/m68knommu/include/asm/module.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef ASM_M68KNOMMU_MODULE_H -#define ASM_M68KNOMMU_MODULE_H - -struct mod_arch_specific { -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h deleted file mode 100644 index 81a1677..0000000 --- a/arch/m68knommu/include/asm/movs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h deleted file mode 100644 index bdfadec4..0000000 --- a/arch/m68knommu/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h deleted file mode 100644 index 458c1f7..0000000 --- a/arch/m68knommu/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h deleted file mode 100644 index 0299f6a..0000000 --- a/arch/m68knommu/include/asm/nettel.h +++ /dev/null @@ -1,108 +0,0 @@ -/****************************************************************************/ - -/* - * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) - * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) - * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) - */ - -/****************************************************************************/ -#ifndef nettel_h -#define nettel_h -/****************************************************************************/ - - -/****************************************************************************/ -#ifdef CONFIG_NETtel -/****************************************************************************/ - -#ifdef CONFIG_COLDFIRE -#include -#include -#endif - -/*---------------------------------------------------------------------------*/ -#if defined(CONFIG_M5307) -/* - * NETtel/5307 based hardware first. DTR/DCD lines are wired to - * GPIO lines. Most of the LED's are driver through a latch - * connected to CS2. - */ -#define MCFPP_DCD1 0x0001 -#define MCFPP_DCD0 0x0002 -#define MCFPP_DTR1 0x0004 -#define MCFPP_DTR0 0x0008 - -#define NETtel_LEDADDR 0x30400000 - -#ifndef __ASSEMBLY__ - -extern volatile unsigned short ppdata; - -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - ppdata = (ppdata & ~mask) | bits; - *pp = ppdata; -} -#endif - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5206e) -/* - * NETtel/5206e based hardware has leds on latch on CS3. - * No support modem for lines?? - */ -#define NETtel_LEDADDR 0x50000000 - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5272) -/* - * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. - */ -#define MCFPP_DCD0 0x0080 -#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ -#define MCFPP_DTR0 0x0040 -#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ - -#ifndef __ASSEMBLY__ -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - *pp = (*pp & ~mask) | bits; -} -#endif - -#endif -/*---------------------------------------------------------------------------*/ - -/****************************************************************************/ -#endif /* CONFIG_NETtel */ -/****************************************************************************/ -#endif /* nettel_h */ diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h deleted file mode 100644 index fdba795..0000000 --- a/arch/m68knommu/include/asm/openprom.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h deleted file mode 100644 index ce079dc..0000000 --- a/arch/m68knommu/include/asm/oplib.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h deleted file mode 100644 index 3a1ede4..0000000 --- a/arch/m68knommu/include/asm/page.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68KNOMMU_PAGE_H -#define _M68KNOMMU_PAGE_H - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* !__ASSEMBLY__ */ - -#include - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) - -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) - -#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) -#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ - ((void *)(kaddr) < (void *)memory_end)) - -#endif /* __ASSEMBLY__ */ - -#include - -#endif /* _M68KNOMMU_PAGE_H */ diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h deleted file mode 100644 index d4e73e0..0000000 --- a/arch/m68knommu/include/asm/page_offset.h +++ /dev/null @@ -1,5 +0,0 @@ - - -/* This handles the memory map.. */ -#define PAGE_OFFSET_RAW CONFIG_RAMBASE - diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h deleted file mode 100644 index 6044397..0000000 --- a/arch/m68knommu/include/asm/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_PARAM_H -#define _M68KNOMMU_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ -#define USER_HZ HZ -#define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _M68KNOMMU_PARAM_H */ diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h deleted file mode 100644 index a13f3cc..0000000 --- a/arch/m68knommu/include/asm/pci.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef M68KNOMMU_PCI_H -#define M68KNOMMU_PCI_H - -#include - -#ifdef CONFIG_COMEMPCI -/* - * These are pretty much arbitary with the CoMEM implementation. - * We have the whole address space to ourselves. - */ -#define PCIBIOS_MIN_IO 0x100 -#define PCIBIOS_MIN_MEM 0x00010000 - -#define pcibios_scan_all_fns(a, b) 0 - -/* - * Return whether the given PCI device DMA address mask can - * be supported properly. For example, if your device can - * only drive the low 24-bits during PCI bus mastering, then - * you would pass 0x00ffffff as the mask to this function. - */ -static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) -{ - return 1; -} - -#endif /* CONFIG_COMEMPCI */ - -#endif /* M68KNOMMU_PCI_H */ diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h deleted file mode 100644 index 5de72c3..0000000 --- a/arch/m68knommu/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_PERCPU__ -#define __ARCH_M68KNOMMU_PERCPU__ - -#include - -#endif /* __ARCH_M68KNOMMU_PERCPU__ */ diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h deleted file mode 100644 index d6352f6..0000000 --- a/arch/m68knommu/include/asm/pgalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _M68KNOMMU_PGALLOC_H -#define _M68KNOMMU_PGALLOC_H - -#include - -#define check_pgt_cache() do { } while (0) - -#endif /* _M68KNOMMU_PGALLOC_H */ diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h deleted file mode 100644 index 4625101..0000000 --- a/arch/m68knommu/include/asm/pgtable.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef _M68KNOMMU_PGTABLE_H -#define _M68KNOMMU_PGTABLE_H - -#include - -/* - * (C) Copyright 2000-2002, Greg Ungerer - */ - -#include -#include -#include -#include - -/* - * Trivial page table functions. - */ -#define pgd_present(pgd) (1) -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *)0) - -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - -extern void paging_init(void); -#define swapper_pg_dir ((pgd_t *) 0) - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline int pte_file(pte_t pte) { return 0; } - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* - * These would be in other places but having them here reduces the diffs. - */ -extern unsigned int kobjsize(const void *objp); - -/* - * No page table caches to initialise. - */ -#define pgtable_cache_init() do { } while (0) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -/* - * All 32bit addresses are effectively valid for vmalloc... - * Sort of meaningless for non-VM targets. - */ -#define VMALLOC_START 0 -#define VMALLOC_END 0xffffffff - -#include - -#endif /* _M68KNOMMU_PGTABLE_H */ diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h deleted file mode 100644 index ee1b6cb..0000000 --- a/arch/m68knommu/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h deleted file mode 100644 index 6205fb9..0000000 --- a/arch/m68knommu/include/asm/posix_types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h deleted file mode 100644 index 91cba18..0000000 --- a/arch/m68knommu/include/asm/processor.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-m68knommu/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include -#include -#include -#include -#include -#include -#include - -static inline unsigned long rdusp(void) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - return(sw_usp); -#else - unsigned long usp; - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -#endif -} - -static inline void wrusp(unsigned long usp) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - sw_usp = usp; -#else - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -#endif -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE (0xF0000000UL) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it - */ -#define TASK_UNMAPPED_BASE 0 - -/* - * if you change this structure, you must change the code and offsets - * in m68k/machasm.S - */ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ -}; - -#define INIT_THREAD { \ - sizeof(init_stack) + (unsigned long) init_stack, 0, \ - PS_S, __KERNEL_DS, \ - {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ -} - -/* - * Coldfire stacks need to be re-aligned on trap exit, conventional - * 68k can handle this case cleanly. - */ -#if defined(CONFIG_COLDFIRE) -#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) -#else -#define reformat(_regs) do { } while (0) -#endif - -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->pc = (_pc); \ - ((struct switch_stack *)(_regs))[-1].a6 = 0; \ - reformat(_regs); \ - if (current->mm) \ - (_regs)->d5 = current->mm->start_data; \ - (_regs)->sr &= ~0x2000; \ - wrusp(_usp); \ -} while(0) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -unsigned long thread_saved_pc(struct task_struct *tsk); -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h deleted file mode 100644 index 8c9194b..0000000 --- a/arch/m68knommu/include/asm/ptrace.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _M68K_PTRACE_H -#define _M68K_PTRACE_H - -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 - -#ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; -#ifdef CONFIG_COLDFIRE - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ - unsigned short sr; - unsigned long pc; -#else - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -#endif -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#ifdef __KERNEL__ - -#ifndef PS_S -#define PS_S (0x2000) -#define PS_M (0x1000) -#endif - -#define user_mode(regs) (!((regs)->sr & PS_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _M68K_PTRACE_H */ diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h deleted file mode 100644 index c363693..0000000 --- a/arch/m68knommu/include/asm/quicc_simple.h +++ /dev/null @@ -1,52 +0,0 @@ -/*********************************** - * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ - *********************************** - * - *************************************** - * Simple drivers common header - *************************************** - */ - -#ifndef __SIMPLE_H -#define __SIMPLE_H - -/* #include "quicc.h" */ - -#define GLB_SCC_0 0 -#define GLB_SCC_1 1 -#define GLB_SCC_2 2 -#define GLB_SCC_3 3 - -typedef void (int_routine)(unsigned short interrupt_event); -typedef int_routine *int_routine_ptr; -typedef void *(alloc_routine)(int length); -typedef void (free_routine)(int scc_num, int channel_num, void *buf); -typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); -typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); -typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); -typedef void (handle_lost_error_routine)(int scc_num, int channel_num); - -/* user defined functions for global errors */ -typedef void (handle_glob_overrun_routine)(int scc_number); -typedef void (handle_glob_underrun_routine)(int scc_number); -typedef void (glob_intr_q_overflow_routine)(int scc_number); - -/* - * General initialization and command routines - */ -void quicc_issue_cmd (unsigned short cmd, int scc_num); -void quicc_init(void); -void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_scc_start(int scc_num); -void quicc_scc_loopback(int scc_num); - -/* Interrupt enable/disable routines for critical pieces of code*/ -unsigned short IntrDis(void); -void IntrEna(unsigned short old_sr); - -/* For debugging */ -void print_rbd(int scc_num); -void print_tbd(int scc_num); - -#endif diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h deleted file mode 100644 index 7fa63d5..0000000 --- a/arch/m68knommu/include/asm/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h deleted file mode 100644 index eaf18ec..0000000 --- a/arch/m68knommu/include/asm/rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h deleted file mode 100644 index afc4788..0000000 --- a/arch/m68knommu/include/asm/scatterlist.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_SCATTERLIST_H -#define _M68KNOMMU_SCATTERLIST_H - -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffff) - -#endif /* !(_M68KNOMMU_SCATTERLIST_H) */ diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h deleted file mode 100644 index dd0ecb9..0000000 --- a/arch/m68knommu/include/asm/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_SECTIONS_H -#define _M68KNOMMU_SECTIONS_H - -/* nothing to see, move along */ -#include - -#endif diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h deleted file mode 100644 index 42318eb..0000000 --- a/arch/m68knommu/include/asm/segment.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline mm_segment_t get_ds(void) -{ - /* return the supervisor data space code */ - return KERNEL_DS; -} - -static inline void set_fs(mm_segment_t val) -{ -} - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h deleted file mode 100644 index 3a634f9..0000000 --- a/arch/m68knommu/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h deleted file mode 100644 index fb86bb2..0000000 --- a/arch/m68knommu/include/asm/setup.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifdef __KERNEL__ - -#include - -/* We have a bigger command line buffer. */ -#undef COMMAND_LINE_SIZE - -#endif /* __KERNEL__ */ - -#define COMMAND_LINE_SIZE 512 diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h deleted file mode 100644 index cc8e522..0000000 --- a/arch/m68knommu/include/asm/shm.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h deleted file mode 100644 index bc34cf8..0000000 --- a/arch/m68knommu/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h deleted file mode 100644 index d7ee696..0000000 --- a/arch/m68knommu/include/asm/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h deleted file mode 100644 index 36c293f..0000000 --- a/arch/m68knommu/include/asm/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H -#define _ASM_M68KNOMMU_SIGCONTEXT_H - -struct sigcontext { - unsigned long sc_mask; /* old sigmask */ - unsigned long sc_usp; /* old user stack pointer */ - unsigned long sc_d0; - unsigned long sc_d1; - unsigned long sc_a0; - unsigned long sc_a1; - unsigned long sc_a5; - unsigned short sc_sr; - unsigned long sc_pc; - unsigned short sc_formatvec; -}; - -#endif diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h deleted file mode 100644 index b18e5f4..0000000 --- a/arch/m68knommu/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68KNOMMU_SIGINFO_H -#define _M68KNOMMU_SIGINFO_H - -#include - -#endif diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h deleted file mode 100644 index 216c08b..0000000 --- a/arch/m68knommu/include/asm/signal.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef _M68KNOMMU_SIGNAL_H -#define _M68KNOMMU_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_SIGNAL_H */ diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h deleted file mode 100644 index 9e9bd7e..0000000 --- a/arch/m68knommu/include/asm/smp.h +++ /dev/null @@ -1 +0,0 @@ -/* nothing required here yet */ diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h deleted file mode 100644 index ac5478b..0000000 --- a/arch/m68knommu/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h deleted file mode 100644 index dcc6a89..0000000 --- a/arch/m68knommu/include/asm/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h deleted file mode 100644 index 6bb1f06..0000000 --- a/arch/m68knommu/include/asm/spinlock.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h deleted file mode 100644 index 3d4b260..0000000 --- a/arch/m68knommu/include/asm/stat.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h deleted file mode 100644 index 2ce99ea..0000000 --- a/arch/m68knommu/include/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h deleted file mode 100644 index af09e17..0000000 --- a/arch/m68knommu/include/asm/string.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _M68KNOMMU_STRING_H_ -#define _M68KNOMMU_STRING_H_ - -#ifdef __KERNEL__ /* only set these up for kernel code */ - -#include -#include - -#define __HAVE_ARCH_STRCPY -static inline char * strcpy(char * dest,const char *src) -{ - char *xdest = dest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jne 1b" - : "=a" (dest), "=a" (src) - : "0" (dest), "1" (src) : "memory"); - return xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char * strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - - if (n == 0) - return xdest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jeq 2f\n\t" - "subql #1,%2\n\t" - "jne 1b\n\t" - "2:" - : "=a" (dest), "=a" (src), "=d" (n) - : "0" (dest), "1" (src), "2" (n) - : "memory"); - return xdest; -} - - -#ifndef CONFIG_COLDFIRE - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char * cs,const char * ct) -{ - char __res; - - __asm__ - ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ - "cmpb %1@+,%2\n\t" /* compare a byte */ - "jne 2f\n\t" /* not equal, break out */ - "tstb %2\n\t" /* at end of cs? */ - "jne 1b\n\t" /* no, keep going */ - "jra 3f\n\t" /* strings are equal */ - "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ - "3:" - : "=a" (cs), "=a" (ct), "=d" (__res) - : "0" (cs), "1" (ct)); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char * cs,const char * ct,size_t count) -{ - char __res; - - if (!count) - return 0; - __asm__ - ("1:\tmovb %0@+,%3\n\t" /* get *cs */ - "cmpb %1@+,%3\n\t" /* compare a byte */ - "jne 3f\n\t" /* not equal, break out */ - "tstb %3\n\t" /* at end of cs? */ - "jeq 4f\n\t" /* yes, all done */ - "subql #1,%2\n\t" /* no, adjust count */ - "jne 1b\n\t" /* more to do, keep going */ - "2:\tmoveq #0,%3\n\t" /* strings are equal */ - "jra 4f\n\t" - "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ - "4:" - : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) - : "0" (cs), "1" (ct), "2" (count)); - return __res; -} - -#endif /* CONFIG_COLDFIRE */ - -#define __HAVE_ARCH_MEMSET -extern void * memset(void * s, int c, size_t count); - -#define __HAVE_ARCH_MEMCPY -extern void * memcpy(void *d, const void *s, size_t count); - -#else /* KERNEL */ - -/* - * let user libraries deal with these, - * IMHO the kernel has no place defining these functions for user apps - */ - -#define __HAVE_ARCH_STRCPY 1 -#define __HAVE_ARCH_STRNCPY 1 -#define __HAVE_ARCH_STRCAT 1 -#define __HAVE_ARCH_STRNCAT 1 -#define __HAVE_ARCH_STRCMP 1 -#define __HAVE_ARCH_STRNCMP 1 -#define __HAVE_ARCH_STRNICMP 1 -#define __HAVE_ARCH_STRCHR 1 -#define __HAVE_ARCH_STRRCHR 1 -#define __HAVE_ARCH_STRSTR 1 -#define __HAVE_ARCH_STRLEN 1 -#define __HAVE_ARCH_STRNLEN 1 -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 -#define __HAVE_ARCH_MEMMOVE 1 -#define __HAVE_ARCH_MEMSCAN 1 -#define __HAVE_ARCH_MEMCMP 1 -#define __HAVE_ARCH_MEMCHR 1 -#define __HAVE_ARCH_STRTOK 1 - -#endif /* KERNEL */ - -#endif /* _M68K_STRING_H_ */ diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68knommu/include/asm/swab.h deleted file mode 100644 index e582257..0000000 --- a/arch/m68knommu/include/asm/swab.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _M68KNOMMU_SWAB_H -#define _M68KNOMMU_SWAB_H - -#include - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - asm( - "byterev %0" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#define __arch_swab32 __arch_swab32 -#endif - -#endif /* _M68KNOMMU_SWAB_H */ diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h deleted file mode 100644 index 40f49de..0000000 --- a/arch/m68knommu/include/asm/system.h +++ /dev/null @@ -1,324 +0,0 @@ -#ifndef _M68KNOMMU_SYSTEM_H -#define _M68KNOMMU_SYSTEM_H - -#include -#include -#include - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1, offset of tss in d1, and whether - * the mm structures are shared in d2 (to avoid atc flushing). - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) \ -{ \ - void *_last; \ - __asm__ __volatile__( \ - "movel %1, %%a0\n\t" \ - "movel %2, %%a1\n\t" \ - "jbsr resume\n\t" \ - "movel %%d1, %0\n\t" \ - : "=d" (_last) \ - : "d" (prev), "d" (next) \ - : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ - (last) = _last; \ -} - -#ifdef CONFIG_COLDFIRE -#define local_irq_enable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "andi.l #0xf8ff,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -#define local_irq_disable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "ori.l #0x0700,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ( \ - "movew %%sr,%0\n\t" \ - "movew #0x0700,%%d0\n\t" \ - "or.l %0,%%d0\n\t" \ - "movew %%d0,%/sr" \ - : "=d" (x) \ - : \ - : "cc", "%d0", "memory") -#else - -/* portable version */ /* FIXME - see entry.h*/ -#define ALLOWINT 0xf8ff - -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#endif - -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -/* For spinlocks etc */ -#ifndef local_irq_save -#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) -#endif - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - ((flags & 0x0700) == 0x0700); \ -}) - -#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() asm volatile ("nop"::) -#define mb() asm volatile ("" : : :"memory") -#define rmb() asm volatile ("" : : :"memory") -#define wmb() asm volatile ("" : : :"memory") -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long tmp, flags; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "moveb %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "movew %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "movel %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - local_irq_restore(flags); - return tmp; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include -#endif - -#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ - defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) -#define HARD_RESET_NOW() ({ \ - local_irq_disable(); \ - asm(" \ - moveal #0x10c00000, %a0; \ - moveb #0, 0xFFFFF300; \ - moveal 0(%a0), %sp; \ - moveal 4(%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif - -#ifdef CONFIG_COLDFIRE -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -/* - * Need to account for broken early mask of 5272 silicon. So don't - * jump through the original start address. Jump strait into the - * known start of the FLASH code. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - jmp 0xf0000400; \ - "); \ -}) -#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ - defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x10000044, %a0; \ - movel #0xffffffff, (%a0); \ - moveal #0x10000001, %a0; \ - moveb #0x00, (%a0); \ - moveal #0xf0000004, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#elif defined(CONFIG_M5272) -/* - * Retrieve the boot address in flash using CSBR0 and CSOR0 - * find the reset vector at flash_address + 4 (e.g. 0x400) - * remap it in the flash's current location (e.g. 0xf0000400) - * and jump there. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %%sr; \ - move.l %0+0x40,%%d0; \ - and.l %0+0x44,%%d0; \ - andi.l #0xfffff000,%%d0; \ - mov.l %%d0,%%a0; \ - or.l 4(%%a0),%%d0; \ - mov.l %%d0,%%a0; \ - jmp (%%a0);" \ - : /* No output */ \ - : "o" (*(char *)MCF_MBAR) ); \ -}) -#elif defined(CONFIG_M528x) -/* - * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), - * that when set, resets the MCF528x. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ - while(1) \ - *reset |= (0x01 << 7);\ -}) -#elif defined(CONFIG_M523x) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - movel #0x01000000, %sp; \ - moveal #0x40110000, %a0; \ - moveb #0x80, (%a0); \ - "); \ -}) -#elif defined(CONFIG_M520x) - /* - * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register - * RCR), that when set, resets the MCF5208. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ - while(1) \ - *reset |= 0x80; \ -}) -#else -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x4, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif -#endif -#define arch_align_stack(x) (x) - - -static inline int irqs_disabled_flags(unsigned long flags) -{ - if (flags & 0x0700) - return 0; - else - return 1; -} - -#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h deleted file mode 100644 index 05dd6bc..0000000 --- a/arch/m68knommu/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h deleted file mode 100644 index e733788..0000000 --- a/arch/m68knommu/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h deleted file mode 100644 index 82529f4..0000000 --- a/arch/m68knommu/include/asm/thread_info.h +++ /dev/null @@ -1,100 +0,0 @@ -/* thread_info.h: m68knommu low-level thread information - * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#include - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* - * Size of kernel stack for each process. This must be a power of 2... - */ -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE_ORDER (0) -#else -#define THREAD_SIZE_ORDER (1) -#endif - -/* - * for asm files, THREAD_SIZE is now generated by asm-offsets.c - */ -#define THREAD_SIZE (PAGE_SIZE< preemptable, <0 => BUG */ - struct restart_block restart_block; -}; - -/* - * macros/functions for gaining access to the thread information structure - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__( - "move.l %%sp, %0 \n\t" - "and.l %1, %0" - : "=&d"(ti) - : "di" (~(THREAD_SIZE-1)) - ); - return ti; -} - -#endif /* __ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x4000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 -#define TIF_FREEZE 16 /* is freezing for suspend */ - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1< -#define CLOCK_TICK_RATE MCF_CLK -#else -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#endif - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h deleted file mode 100644 index 77a7c51..0000000 --- a/arch/m68knommu/include/asm/tlb.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h deleted file mode 100644 index a470cfb..0000000 --- a/arch/m68knommu/include/asm/tlbflush.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _M68KNOMMU_TLBFLUSH_H -#define _M68KNOMMU_TLBFLUSH_H - -/* - * Copyright (C) 2000 Lineo, David McCullough - * Copyright (C) 2000-2002, Greg Ungerer - */ - -#include - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG(); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG(); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - BUG(); -} - -static inline void flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - BUG(); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG(); -} - -#endif /* _M68KNOMMU_TLBFLUSH_H */ diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h deleted file mode 100644 index ca173e9..0000000 --- a/arch/m68knommu/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h deleted file mode 100644 index d0671e5..0000000 --- a/arch/m68knommu/include/asm/traps.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * linux/include/asm/traps.h - * - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _M68KNOMMU_TRAPS_H -#define _M68KNOMMU_TRAPS_H - -#ifndef __ASSEMBLY__ - -typedef void (*e_vector)(void); - -extern e_vector vectors[]; -extern void init_vectors(void); -extern void enable_vector(unsigned int irq); -extern void disable_vector(unsigned int irq); -extern void ack_vector(unsigned int irq); - -#endif - -#define VEC_BUSERR (2) -#define VEC_ADDRERR (3) -#define VEC_ILLEGAL (4) -#define VEC_ZERODIV (5) -#define VEC_CHK (6) -#define VEC_TRAP (7) -#define VEC_PRIV (8) -#define VEC_TRACE (9) -#define VEC_LINE10 (10) -#define VEC_LINE11 (11) -#define VEC_RESV1 (12) -#define VEC_COPROC (13) -#define VEC_FORMAT (14) -#define VEC_UNINT (15) -#define VEC_SPUR (24) -#define VEC_INT1 (25) -#define VEC_INT2 (26) -#define VEC_INT3 (27) -#define VEC_INT4 (28) -#define VEC_INT5 (29) -#define VEC_INT6 (30) -#define VEC_INT7 (31) -#define VEC_SYS (32) -#define VEC_TRAP1 (33) -#define VEC_TRAP2 (34) -#define VEC_TRAP3 (35) -#define VEC_TRAP4 (36) -#define VEC_TRAP5 (37) -#define VEC_TRAP6 (38) -#define VEC_TRAP7 (39) -#define VEC_TRAP8 (40) -#define VEC_TRAP9 (41) -#define VEC_TRAP10 (42) -#define VEC_TRAP11 (43) -#define VEC_TRAP12 (44) -#define VEC_TRAP13 (45) -#define VEC_TRAP14 (46) -#define VEC_TRAP15 (47) -#define VEC_FPBRUC (48) -#define VEC_FPIR (49) -#define VEC_FPDIVZ (50) -#define VEC_FPUNDER (51) -#define VEC_FPOE (52) -#define VEC_FPOVER (53) -#define VEC_FPNAN (54) -#define VEC_FPUNSUP (55) -#define VEC_UNIMPEA (60) -#define VEC_UNIMPII (61) -#define VEC_USER (64) - -#define VECOFF(vec) ((vec)<<2) - -#ifndef __ASSEMBLY__ - -/* Status register bits */ -#define PS_T (0x8000) -#define PS_S (0x2000) -#define PS_M (0x1000) -#define PS_C (0x0001) - -/* structure for stack frames */ - -struct frame { - struct pt_regs ptregs; - union { - struct { - unsigned long iaddr; /* instruction address */ - } fmt2; - struct { - unsigned long effaddr; /* effective address */ - } fmt3; - struct { - unsigned long effaddr; /* effective address */ - unsigned long pc; /* pc of faulted instr */ - } fmt4; - struct { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ - } fmt7; - struct { - unsigned long iaddr; /* instruction address */ - unsigned short int1[4]; /* internal registers */ - } fmt9; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[2]; - } fmta; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[4]; - unsigned long baddr; /* stage B address */ - unsigned short int4[2]; - unsigned long dibuf; /* data cycle input buffer */ - unsigned short int5[3]; - unsigned ver : 4; /* stack frame version # */ - unsigned int6:12; - unsigned short int7[18]; - } fmtb; - } un; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68KNOMMU_TRAPS_H */ diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h deleted file mode 100644 index 031238c..0000000 --- a/arch/m68knommu/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h deleted file mode 100644 index 68bbe9b..0000000 --- a/arch/m68knommu/include/asm/uaccess.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_UACCESS_H -#define __M68KNOMMU_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include - -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) - -/* - * It is not enough to just have access_ok check for a real RAM address. - * This would disallow the case of code/ro-data running XIP in flash/rom. - * Ideally we would check the possible flash ranges too, but that is - * currently not so easy. - */ -static inline int _access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -#define put_user(x, ptr) \ -({ \ - int __pu_err = 0; \ - typeof(*(ptr)) __pu_val = (x); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l); \ - break; \ - case 8: \ - memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) -#define __put_user(x, ptr) put_user(x, ptr) - -extern int __put_user_bad(void); - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ - -#define __ptr(x) ((unsigned long *)(x)) - -#define __put_user_asm(err,x,ptr,bwl) \ - __asm__ ("move" #bwl " %0,%1" \ - : /* no outputs */ \ - :"d" (x),"m" (*__ptr(ptr)) : "memory") - -#define get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - typeof(x) __gu_val = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ - break; \ - case 2: \ - __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ - break; \ - case 4: \ - __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ - break; \ - case 8: \ - memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ - break; \ - default: \ - __gu_val = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - (x) = (typeof(*(ptr))) __gu_val; \ - __gu_err; \ -}) -#define __get_user(x, ptr) get_user(x, ptr) - -extern int __get_user_bad(void); - -#define __get_user_asm(err,x,ptr,bwl,reg) \ - __asm__ ("move" #bwl " %1,%0" \ - : "=d" (x) \ - : "m" (*__ptr(ptr))) - -#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) -#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) - -#define __copy_from_user(to, from, n) copy_from_user(to, from, n) -#define __copy_to_user(to, from, n) copy_to_user(to, from, n) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) - -#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) - -/* - * Copy a null terminated string from userspace. - */ - -static inline long -strncpy_from_user(char *dst, const char *src, long count) -{ - char *tmp; - strncpy(dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--) - ; - return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -static inline long strnlen_user(const char *src, long n) -{ - return(strlen(src) + 1); /* DAVIDM make safer */ -} - -#define strlen_user(str) strnlen_user(str, 32767) - -/* - * Zero Userspace - */ - -static inline unsigned long -__clear_user(void *to, unsigned long n) -{ - memset(to, 0, n); - return 0; -} - -#define clear_user(to,n) __clear_user(to,n) - -#endif /* _M68KNOMMU_UACCESS_H */ diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h deleted file mode 100644 index 713a27f..0000000 --- a/arch/m68knommu/include/asm/ucontext.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _M68KNOMMU_UCONTEXT_H -#define _M68KNOMMU_UCONTEXT_H - -typedef int greg_t; -#define NGREG 18 -typedef greg_t gregset_t[NGREG]; - -typedef struct fpregset { - int f_pcr; - int f_psr; - int f_fpiaddr; - int f_fpregs[8][3]; -} fpregset_t; - -struct mcontext { - int version; - gregset_t gregs; - fpregset_t fpregs; -}; - -#define MCONTEXT_VERSION 2 - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct mcontext uc_mcontext; - unsigned long uc_filler[80]; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h deleted file mode 100644 index eb1ea4c..0000000 --- a/arch/m68knommu/include/asm/unaligned.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_M68KNOMMU_UNALIGNED_H -#define _ASM_M68KNOMMU_UNALIGNED_H - - -#ifdef CONFIG_COLDFIRE -#include -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#else -/* - * The m68k can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif - -#endif /* _ASM_M68KNOMMU_UNALIGNED_H */ diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h deleted file mode 100644 index b034a2f..0000000 --- a/arch/m68knommu/include/asm/unistd.h +++ /dev/null @@ -1,372 +0,0 @@ -#ifndef _ASM_M68K_UNISTD_H_ -#define _ASM_M68K_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -#define __NR_vserver 278 -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 - -#ifdef __KERNEL__ - -#define NR_syscalls 329 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h deleted file mode 100644 index a5a555b..0000000 --- a/arch/m68knommu/include/asm/user.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/Kbuild b/include/asm-m68k/Kbuild deleted file mode 100644 index 52fd96b..0000000 --- a/include/asm-m68k/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm -header-y += cachectl.h -unifdef-y += swab.h diff --git a/include/asm-m68k/a.out-core.h b/include/asm-m68k/a.out-core.h deleted file mode 100644 index f6bfc1d..0000000 --- a/include/asm-m68k/a.out-core.h +++ /dev/null @@ -1,67 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct switch_stack *sw; - -/* changed the size calculations - should hopefully work better. lbt */ - dump->magic = CMAGIC; - dump->start_code = 0; - dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); - dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; - dump->u_dsize = ((unsigned long) (current->mm->brk + - (PAGE_SIZE-1))) >> PAGE_SHIFT; - dump->u_dsize -= dump->u_tsize; - dump->u_ssize = 0; - - if (dump->start_stack < TASK_SIZE) - dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; - - dump->u_ar0 = offsetof(struct user, regs); - sw = ((struct switch_stack *)regs) - 1; - dump->regs.d1 = regs->d1; - dump->regs.d2 = regs->d2; - dump->regs.d3 = regs->d3; - dump->regs.d4 = regs->d4; - dump->regs.d5 = regs->d5; - dump->regs.d6 = sw->d6; - dump->regs.d7 = sw->d7; - dump->regs.a0 = regs->a0; - dump->regs.a1 = regs->a1; - dump->regs.a2 = regs->a2; - dump->regs.a3 = sw->a3; - dump->regs.a4 = sw->a4; - dump->regs.a5 = sw->a5; - dump->regs.a6 = sw->a6; - dump->regs.d0 = regs->d0; - dump->regs.orig_d0 = regs->orig_d0; - dump->regs.stkadj = regs->stkadj; - dump->regs.sr = regs->sr; - dump->regs.pc = regs->pc; - dump->regs.fmtvec = (regs->format << 12) | regs->vector; - /* dump floating point stuff */ - dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-m68k/a.out.h b/include/asm-m68k/a.out.h deleted file mode 100644 index 3885fe4..0000000 --- a/include/asm-m68k/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __M68K_A_OUT_H__ -#define __M68K_A_OUT_H__ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __M68K_A_OUT_H__ */ diff --git a/include/asm-m68k/adb_iop.h b/include/asm-m68k/adb_iop.h deleted file mode 100644 index 8a48e56..0000000 --- a/include/asm-m68k/adb_iop.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * ADB through the IOP - * Written by Joshua M. Thompson - */ - -/* IOP number and channel number for ADB */ - -#define ADB_IOP IOP_NUM_ISM -#define ADB_CHAN 2 - -/* From the A/UX headers...maybe important, maybe not */ - -#define ADB_IOP_LISTEN 0x01 -#define ADB_IOP_TALK 0x02 -#define ADB_IOP_EXISTS 0x04 -#define ADB_IOP_FLUSH 0x08 -#define ADB_IOP_RESET 0x10 -#define ADB_IOP_INT 0x20 -#define ADB_IOP_POLL 0x40 -#define ADB_IOP_UNINT 0x80 - -#define AIF_RESET 0x00 -#define AIF_FLUSH 0x01 -#define AIF_LISTEN 0x08 -#define AIF_TALK 0x0C - -/* Flag bits in struct adb_iopmsg */ - -#define ADB_IOP_EXPLICIT 0x80 /* nonzero if explicit command */ -#define ADB_IOP_AUTOPOLL 0x40 /* auto/SRQ polling enabled */ -#define ADB_IOP_SRQ 0x04 /* SRQ detected */ -#define ADB_IOP_TIMEOUT 0x02 /* nonzero if timeout */ - -#ifndef __ASSEMBLY__ - -struct adb_iopmsg { - __u8 flags; /* ADB flags */ - __u8 count; /* no. of data bytes */ - __u8 cmd; /* ADB command */ - __u8 data[8]; /* ADB data */ - __u8 spare[21]; /* spare */ -}; - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/amigahw.h b/include/asm-m68k/amigahw.h deleted file mode 100644 index 5ca5dd9..0000000 --- a/include/asm-m68k/amigahw.h +++ /dev/null @@ -1,350 +0,0 @@ -/* -** asm-m68k/amigahw.h -- This header defines some macros and pointers for -** the various Amiga custom hardware registers. -** The naming conventions used here conform to those -** used in the Amiga Hardware Reference Manual, 3rd Edition -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 9/24/92 by Greg Harp -*/ - -#ifndef _M68K_AMIGAHW_H -#define _M68K_AMIGAHW_H - -#include - - /* - * Different Amiga models - */ - -#define AMI_UNKNOWN (0) -#define AMI_500 (1) -#define AMI_500PLUS (2) -#define AMI_600 (3) -#define AMI_1000 (4) -#define AMI_1200 (5) -#define AMI_2000 (6) -#define AMI_2500 (7) -#define AMI_3000 (8) -#define AMI_3000T (9) -#define AMI_3000PLUS (10) -#define AMI_4000 (11) -#define AMI_4000T (12) -#define AMI_CDTV (13) -#define AMI_CD32 (14) -#define AMI_DRACO (15) - - - /* - * Chipsets - */ - -extern unsigned long amiga_chipset; - -#define CS_STONEAGE (0) -#define CS_OCS (1) -#define CS_ECS (2) -#define CS_AGA (3) - - - /* - * Miscellaneous - */ - -extern unsigned long amiga_eclock; /* 700 kHz E Peripheral Clock */ -extern unsigned long amiga_colorclock; /* 3.5 MHz Color Clock */ -extern unsigned long amiga_chip_size; /* Chip RAM Size (bytes) */ -extern unsigned char amiga_vblank; /* VBLANK Frequency */ - - -#define AMIGAHW_DECLARE(name) unsigned name : 1 -#define AMIGAHW_SET(name) (amiga_hw_present.name = 1) -#define AMIGAHW_PRESENT(name) (amiga_hw_present.name) - -struct amiga_hw_present { - /* video hardware */ - AMIGAHW_DECLARE(AMI_VIDEO); /* Amiga Video */ - AMIGAHW_DECLARE(AMI_BLITTER); /* Amiga Blitter */ - AMIGAHW_DECLARE(AMBER_FF); /* Amber Flicker Fixer */ - /* sound hardware */ - AMIGAHW_DECLARE(AMI_AUDIO); /* Amiga Audio */ - /* disk storage interfaces */ - AMIGAHW_DECLARE(AMI_FLOPPY); /* Amiga Floppy */ - AMIGAHW_DECLARE(A3000_SCSI); /* SCSI (wd33c93, A3000 alike) */ - AMIGAHW_DECLARE(A4000_SCSI); /* SCSI (ncr53c710, A4000T alike) */ - AMIGAHW_DECLARE(A1200_IDE); /* IDE (A1200 alike) */ - AMIGAHW_DECLARE(A4000_IDE); /* IDE (A4000 alike) */ - AMIGAHW_DECLARE(CD_ROM); /* CD ROM drive */ - /* other I/O hardware */ - AMIGAHW_DECLARE(AMI_KEYBOARD); /* Amiga Keyboard */ - AMIGAHW_DECLARE(AMI_MOUSE); /* Amiga Mouse */ - AMIGAHW_DECLARE(AMI_SERIAL); /* Amiga Serial */ - AMIGAHW_DECLARE(AMI_PARALLEL); /* Amiga Parallel */ - /* real time clocks */ - AMIGAHW_DECLARE(A2000_CLK); /* Hardware Clock (A2000 alike) */ - AMIGAHW_DECLARE(A3000_CLK); /* Hardware Clock (A3000 alike) */ - /* supporting hardware */ - AMIGAHW_DECLARE(CHIP_RAM); /* Chip RAM */ - AMIGAHW_DECLARE(PAULA); /* Paula (8364) */ - AMIGAHW_DECLARE(DENISE); /* Denise (8362) */ - AMIGAHW_DECLARE(DENISE_HR); /* Denise (8373) */ - AMIGAHW_DECLARE(LISA); /* Lisa (8375) */ - AMIGAHW_DECLARE(AGNUS_PAL); /* Normal/Fat PAL Agnus (8367/8371) */ - AMIGAHW_DECLARE(AGNUS_NTSC); /* Normal/Fat NTSC Agnus (8361/8370) */ - AMIGAHW_DECLARE(AGNUS_HR_PAL); /* Fat Hires PAL Agnus (8372) */ - AMIGAHW_DECLARE(AGNUS_HR_NTSC); /* Fat Hires NTSC Agnus (8372) */ - AMIGAHW_DECLARE(ALICE_PAL); /* PAL Alice (8374) */ - AMIGAHW_DECLARE(ALICE_NTSC); /* NTSC Alice (8374) */ - AMIGAHW_DECLARE(MAGIC_REKICK); /* A3000 Magic Hard Rekick */ - AMIGAHW_DECLARE(PCMCIA); /* PCMCIA Slot */ - AMIGAHW_DECLARE(GG2_ISA); /* GG2 Zorro2ISA Bridge */ - AMIGAHW_DECLARE(ZORRO); /* Zorro AutoConfig */ - AMIGAHW_DECLARE(ZORRO3); /* Zorro III */ -}; - -extern struct amiga_hw_present amiga_hw_present; - -struct CUSTOM { - unsigned short bltddat; - unsigned short dmaconr; - unsigned short vposr; - unsigned short vhposr; - unsigned short dskdatr; - unsigned short joy0dat; - unsigned short joy1dat; - unsigned short clxdat; - unsigned short adkconr; - unsigned short pot0dat; - unsigned short pot1dat; - unsigned short potgor; - unsigned short serdatr; - unsigned short dskbytr; - unsigned short intenar; - unsigned short intreqr; - unsigned char *dskptr; - unsigned short dsklen; - unsigned short dskdat; - unsigned short refptr; - unsigned short vposw; - unsigned short vhposw; - unsigned short copcon; - unsigned short serdat; - unsigned short serper; - unsigned short potgo; - unsigned short joytest; - unsigned short strequ; - unsigned short strvbl; - unsigned short strhor; - unsigned short strlong; - unsigned short bltcon0; - unsigned short bltcon1; - unsigned short bltafwm; - unsigned short bltalwm; - unsigned char *bltcpt; - unsigned char *bltbpt; - unsigned char *bltapt; - unsigned char *bltdpt; - unsigned short bltsize; - unsigned char pad2d; - unsigned char bltcon0l; - unsigned short bltsizv; - unsigned short bltsizh; - unsigned short bltcmod; - unsigned short bltbmod; - unsigned short bltamod; - unsigned short bltdmod; - unsigned short spare2[4]; - unsigned short bltcdat; - unsigned short bltbdat; - unsigned short bltadat; - unsigned short spare3[3]; - unsigned short deniseid; - unsigned short dsksync; - unsigned short *cop1lc; - unsigned short *cop2lc; - unsigned short copjmp1; - unsigned short copjmp2; - unsigned short copins; - unsigned short diwstrt; - unsigned short diwstop; - unsigned short ddfstrt; - unsigned short ddfstop; - unsigned short dmacon; - unsigned short clxcon; - unsigned short intena; - unsigned short intreq; - unsigned short adkcon; - struct { - unsigned short *audlc; - unsigned short audlen; - unsigned short audper; - unsigned short audvol; - unsigned short auddat; - unsigned short audspare[2]; - } aud[4]; - unsigned char *bplpt[8]; - unsigned short bplcon0; - unsigned short bplcon1; - unsigned short bplcon2; - unsigned short bplcon3; - unsigned short bpl1mod; - unsigned short bpl2mod; - unsigned short bplcon4; - unsigned short clxcon2; - unsigned short bpldat[8]; - unsigned char *sprpt[8]; - struct { - unsigned short pos; - unsigned short ctl; - unsigned short dataa; - unsigned short datab; - } spr[8]; - unsigned short color[32]; - unsigned short htotal; - unsigned short hsstop; - unsigned short hbstrt; - unsigned short hbstop; - unsigned short vtotal; - unsigned short vsstop; - unsigned short vbstrt; - unsigned short vbstop; - unsigned short sprhstrt; - unsigned short sprhstop; - unsigned short bplhstrt; - unsigned short bplhstop; - unsigned short hhposw; - unsigned short hhposr; - unsigned short beamcon0; - unsigned short hsstrt; - unsigned short vsstrt; - unsigned short hcenter; - unsigned short diwhigh; - unsigned short spare4[11]; - unsigned short fmode; -}; - -/* - * DMA register bits - */ -#define DMAF_SETCLR (0x8000) -#define DMAF_AUD0 (0x0001) -#define DMAF_AUD1 (0x0002) -#define DMAF_AUD2 (0x0004) -#define DMAF_AUD3 (0x0008) -#define DMAF_DISK (0x0010) -#define DMAF_SPRITE (0x0020) -#define DMAF_BLITTER (0x0040) -#define DMAF_COPPER (0x0080) -#define DMAF_RASTER (0x0100) -#define DMAF_MASTER (0x0200) -#define DMAF_BLITHOG (0x0400) -#define DMAF_BLTNZERO (0x2000) -#define DMAF_BLTDONE (0x4000) -#define DMAF_ALL (0x01FF) - -struct CIA { - unsigned char pra; char pad0[0xff]; - unsigned char prb; char pad1[0xff]; - unsigned char ddra; char pad2[0xff]; - unsigned char ddrb; char pad3[0xff]; - unsigned char talo; char pad4[0xff]; - unsigned char tahi; char pad5[0xff]; - unsigned char tblo; char pad6[0xff]; - unsigned char tbhi; char pad7[0xff]; - unsigned char todlo; char pad8[0xff]; - unsigned char todmid; char pad9[0xff]; - unsigned char todhi; char pada[0x1ff]; - unsigned char sdr; char padb[0xff]; - unsigned char icr; char padc[0xff]; - unsigned char cra; char padd[0xff]; - unsigned char crb; char pade[0xff]; -}; - -#define zTwoBase (0x80000000) -#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase) -#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase) - -#define CUSTOM_PHYSADDR (0xdff000) -#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR))) - -#define CIAA_PHYSADDR (0xbfe001) -#define CIAB_PHYSADDR (0xbfd000) -#define ciaa ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR))) -#define ciab ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR))) - -#define CHIP_PHYSADDR (0x000000) - -void amiga_chip_init (void); -void *amiga_chip_alloc(unsigned long size, const char *name); -void *amiga_chip_alloc_res(unsigned long size, struct resource *res); -void amiga_chip_free(void *ptr); -unsigned long amiga_chip_avail( void ); /*MILAN*/ -extern volatile unsigned short amiga_audio_min_period; - -static inline void amifb_video_off(void) -{ - if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) { - /* program Denise/Lisa for a higher maximum play rate */ - amiga_custom.htotal = 113; /* 31 kHz */ - amiga_custom.vtotal = 223; /* 70 Hz */ - amiga_custom.beamcon0 = 0x4390; /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */ - /* suspend the monitor */ - amiga_custom.hsstrt = amiga_custom.hsstop = 116; - amiga_custom.vsstrt = amiga_custom.vsstop = 226; - amiga_audio_min_period = 57; - } -} - -struct tod3000 { - unsigned int :28, second2:4; /* lower digit */ - unsigned int :28, second1:4; /* upper digit */ - unsigned int :28, minute2:4; /* lower digit */ - unsigned int :28, minute1:4; /* upper digit */ - unsigned int :28, hour2:4; /* lower digit */ - unsigned int :28, hour1:4; /* upper digit */ - unsigned int :28, weekday:4; - unsigned int :28, day2:4; /* lower digit */ - unsigned int :28, day1:4; /* upper digit */ - unsigned int :28, month2:4; /* lower digit */ - unsigned int :28, month1:4; /* upper digit */ - unsigned int :28, year2:4; /* lower digit */ - unsigned int :28, year1:4; /* upper digit */ - unsigned int :28, cntrl1:4; /* control-byte 1 */ - unsigned int :28, cntrl2:4; /* control-byte 2 */ - unsigned int :28, cntrl3:4; /* control-byte 3 */ -}; -#define TOD3000_CNTRL1_HOLD 0 -#define TOD3000_CNTRL1_FREE 9 -#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000))) - -struct tod2000 { - unsigned int :28, second2:4; /* lower digit */ - unsigned int :28, second1:4; /* upper digit */ - unsigned int :28, minute2:4; /* lower digit */ - unsigned int :28, minute1:4; /* upper digit */ - unsigned int :28, hour2:4; /* lower digit */ - unsigned int :28, hour1:4; /* upper digit */ - unsigned int :28, day2:4; /* lower digit */ - unsigned int :28, day1:4; /* upper digit */ - unsigned int :28, month2:4; /* lower digit */ - unsigned int :28, month1:4; /* upper digit */ - unsigned int :28, year2:4; /* lower digit */ - unsigned int :28, year1:4; /* upper digit */ - unsigned int :28, weekday:4; - unsigned int :28, cntrl1:4; /* control-byte 1 */ - unsigned int :28, cntrl2:4; /* control-byte 2 */ - unsigned int :28, cntrl3:4; /* control-byte 3 */ -}; - -#define TOD2000_CNTRL1_HOLD (1<<0) -#define TOD2000_CNTRL1_BUSY (1<<1) -#define TOD2000_CNTRL3_24HMODE (1<<2) -#define TOD2000_HOUR1_PM (1<<2) -#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000))) - -#endif /* _M68K_AMIGAHW_H */ diff --git a/include/asm-m68k/amigaints.h b/include/asm-m68k/amigaints.h deleted file mode 100644 index b1bcdb8..0000000 --- a/include/asm-m68k/amigaints.h +++ /dev/null @@ -1,113 +0,0 @@ -/* -** amigaints.h -- Amiga Linux interrupt handling structs and prototypes -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 10/2/92 by Greg Harp -*/ - -#ifndef _ASMm68k_AMIGAINTS_H_ -#define _ASMm68k_AMIGAINTS_H_ - -#include - -/* -** Amiga Interrupt sources. -** -*/ - -#define AUTO_IRQS (8) -#define AMI_STD_IRQS (14) -#define CIA_IRQS (5) -#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */ - -/* builtin serial port interrupts */ -#define IRQ_AMIGA_TBE (IRQ_USER+0) -#define IRQ_AMIGA_RBF (IRQ_USER+11) - -/* floppy disk interrupts */ -#define IRQ_AMIGA_DSKBLK (IRQ_USER+1) -#define IRQ_AMIGA_DSKSYN (IRQ_USER+12) - -/* software interrupts */ -#define IRQ_AMIGA_SOFT (IRQ_USER+2) - -/* interrupts from external hardware */ -#define IRQ_AMIGA_PORTS IRQ_AUTO_2 -#define IRQ_AMIGA_EXTER IRQ_AUTO_6 - -/* copper interrupt */ -#define IRQ_AMIGA_COPPER (IRQ_USER+4) - -/* vertical blanking interrupt */ -#define IRQ_AMIGA_VERTB (IRQ_USER+5) - -/* Blitter done interrupt */ -#define IRQ_AMIGA_BLIT (IRQ_USER+6) - -/* Audio interrupts */ -#define IRQ_AMIGA_AUD0 (IRQ_USER+7) -#define IRQ_AMIGA_AUD1 (IRQ_USER+8) -#define IRQ_AMIGA_AUD2 (IRQ_USER+9) -#define IRQ_AMIGA_AUD3 (IRQ_USER+10) - -/* CIA interrupt sources */ -#define IRQ_AMIGA_CIAA (IRQ_USER+14) -#define IRQ_AMIGA_CIAA_TA (IRQ_USER+14) -#define IRQ_AMIGA_CIAA_TB (IRQ_USER+15) -#define IRQ_AMIGA_CIAA_ALRM (IRQ_USER+16) -#define IRQ_AMIGA_CIAA_SP (IRQ_USER+17) -#define IRQ_AMIGA_CIAA_FLG (IRQ_USER+18) -#define IRQ_AMIGA_CIAB (IRQ_USER+19) -#define IRQ_AMIGA_CIAB_TA (IRQ_USER+19) -#define IRQ_AMIGA_CIAB_TB (IRQ_USER+20) -#define IRQ_AMIGA_CIAB_ALRM (IRQ_USER+21) -#define IRQ_AMIGA_CIAB_SP (IRQ_USER+22) -#define IRQ_AMIGA_CIAB_FLG (IRQ_USER+23) - - -/* INTREQR masks */ -#define IF_SETCLR 0x8000 /* set/clr bit */ -#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */ -#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */ -#define IF_DSKSYN 0x1000 /* disk sync interrupt */ -#define IF_RBF 0x0800 /* serial receive buffer full interrupt */ -#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */ -#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */ -#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */ -#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */ -#define IF_BLIT 0x0040 /* blitter done interrupt */ -#define IF_VERTB 0x0020 /* vertical blanking interrupt */ -#define IF_COPER 0x0010 /* copper interrupt */ -#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */ -#define IF_SOFT 0x0004 /* software initiated interrupt */ -#define IF_DSKBLK 0x0002 /* diskblock DMA finished */ -#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */ - -/* CIA interrupt control register bits */ - -#define CIA_ICR_TA 0x01 -#define CIA_ICR_TB 0x02 -#define CIA_ICR_ALRM 0x04 -#define CIA_ICR_SP 0x08 -#define CIA_ICR_FLG 0x10 -#define CIA_ICR_ALL 0x1f -#define CIA_ICR_SETCLR 0x80 - -extern void amiga_init_IRQ(void); - -/* to access the interrupt control registers of CIA's use only -** these functions, they behave exactly like the amiga os routines -*/ - -extern struct ciabase ciaa_base, ciab_base; - -extern void cia_init_IRQ(struct ciabase *base); -extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask); -extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask); - -#endif /* asm-m68k/amigaints.h */ diff --git a/include/asm-m68k/amigayle.h b/include/asm-m68k/amigayle.h deleted file mode 100644 index bb5a6aa..0000000 --- a/include/asm-m68k/amigayle.h +++ /dev/null @@ -1,107 +0,0 @@ -/* -** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip -** found on the Amiga 1200 -** This information was found by disassembling card.resource, -** so the definitions may not be 100% correct -** anyone has an official doc ? -** -** Copyright 1997 by Alain Malek -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 11/28/97 by Alain Malek -*/ - -#ifndef _M68K_AMIGAYLE_H_ -#define _M68K_AMIGAYLE_H_ - -#include -#include - -/* memory layout */ - -#define GAYLE_RAM (0x600000+zTwoBase) -#define GAYLE_RAMSIZE (0x400000) -#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase) -#define GAYLE_ATTRIBUTESIZE (0x020000) -#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */ -#define GAYLE_IOSIZE (0x010000) -#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */ - -/* offset for accessing odd IO registers */ -#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1) - -/* GAYLE registers */ - -struct GAYLE { - u_char cardstatus; - u_char pad0[0x1000-1]; - - u_char intreq; - u_char pad1[0x1000-1]; - - u_char inten; - u_char pad2[0x1000-1]; - - u_char config; - u_char pad3[0x1000-1]; -}; - -#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */ - -#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset, - read 1 byte to stop reset */ - -#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS)) -#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET)) - -#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE)) - -#if 0 -#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) -#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) - -#define gayle_inw(a) readw( GAYLE_IO+(a) ) -#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) ) -#endif - -/* GAYLE_CARDSTATUS bit def */ - -#define GAYLE_CS_CCDET 0x40 /* credit card detect */ -#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */ -#define GAYLE_CS_SC 0x20 /* credit card status change */ -#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */ -#define GAYLE_CS_DA 0x10 /* digital audio */ -#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */ -#define GAYLE_CS_BSY 0x04 /* credit card busy */ -#define GAYLE_CS_IRQ 0x04 /* interrupt request */ - -/* GAYLE_IRQ bit def */ - -#define GAYLE_IRQ_IDE 0x80 -#define GAYLE_IRQ_CCDET 0x40 -#define GAYLE_IRQ_BVD1 0x20 -#define GAYLE_IRQ_SC 0x20 -#define GAYLE_IRQ_BVD2 0x10 -#define GAYLE_IRQ_DA 0x10 -#define GAYLE_IRQ_WR 0x08 -#define GAYLE_IRQ_BSY 0x04 -#define GAYLE_IRQ_IRQ 0x04 -#define GAYLE_IRQ_IDEACK1 0x02 -#define GAYLE_IRQ_IDEACK0 0x01 - -/* GAYLE_CONFIG bit def - (bit 0-1 for program voltage, bit 2-3 for access speed */ - -#define GAYLE_CFG_0V 0x00 -#define GAYLE_CFG_5V 0x01 -#define GAYLE_CFG_12V 0x02 - -#define GAYLE_CFG_100NS 0x08 -#define GAYLE_CFG_150NS 0x04 -#define GAYLE_CFG_250NS 0x00 -#define GAYLE_CFG_720NS 0x0c - -#endif /* asm-m68k/amigayle.h */ diff --git a/include/asm-m68k/amipcmcia.h b/include/asm-m68k/amipcmcia.h deleted file mode 100644 index 6f1ec18..0000000 --- a/include/asm-m68k/amipcmcia.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions -** -** Copyright 1997 by Alain Malek -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 12/10/97 by Alain Malek -*/ - -#ifndef __AMIGA_PCMCIA_H__ -#define __AMIGA_PCMCIA_H__ - -#include - -/* prototypes */ - -void pcmcia_reset(void); -int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len); -void pcmcia_program_voltage(int voltage); -void pcmcia_access_speed(int speed); -void pcmcia_write_enable(void); -void pcmcia_write_disable(void); - -static inline u_char pcmcia_read_status(void) -{ - return (gayle.cardstatus & 0x7c); -} - -static inline u_char pcmcia_get_intreq(void) -{ - return (gayle.intreq); -} - -static inline void pcmcia_ack_int(u_char intreq) -{ - gayle.intreq = 0xf8; -} - -static inline void pcmcia_enable_irq(void) -{ - gayle.inten |= GAYLE_IRQ_IRQ; -} - -static inline void pcmcia_disable_irq(void) -{ - gayle.inten &= ~GAYLE_IRQ_IRQ; -} - -#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET) - -/* valid voltages for pcmcia_ProgramVoltage */ - -#define PCMCIA_0V 0 -#define PCMCIA_5V 5 -#define PCMCIA_12V 12 - -/* valid speeds for pcmcia_AccessSpeed */ - -#define PCMCIA_SPEED_100NS 100 -#define PCMCIA_SPEED_150NS 150 -#define PCMCIA_SPEED_250NS 250 -#define PCMCIA_SPEED_720NS 720 - -/* PCMCIA Tuple codes */ - -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* FUNCID */ - -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -#endif diff --git a/include/asm-m68k/apollodma.h b/include/asm-m68k/apollodma.h deleted file mode 100644 index 954adc8..0000000 --- a/include/asm-m68k/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/include/asm-m68k/apollohw.h b/include/asm-m68k/apollohw.h deleted file mode 100644 index a1373b9..0000000 --- a/include/asm-m68k/apollohw.h +++ /dev/null @@ -1,108 +0,0 @@ -/* apollohw.h : some structures to access apollo HW */ - -#ifndef _ASMm68k_APOLLOHW_H_ -#define _ASMm68k_APOLLOHW_H_ - -#include - -/* - apollo models -*/ - -extern u_long apollo_model; - -#define APOLLO_UNKNOWN (0) -#define APOLLO_DN3000 (1) -#define APOLLO_DN3010 (2) -#define APOLLO_DN3500 (3) -#define APOLLO_DN4000 (4) -#define APOLLO_DN4500 (5) - -/* - see scn2681 data sheet for more info. - member names are read_write. -*/ - -#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x - -struct SCN2681 { - - DECLARE_2681_FIELD(mra); - DECLARE_2681_FIELD(sra_csra); - DECLARE_2681_FIELD(BRGtest_cra); - DECLARE_2681_FIELD(rhra_thra); - DECLARE_2681_FIELD(ipcr_acr); - DECLARE_2681_FIELD(isr_imr); - DECLARE_2681_FIELD(ctu_ctur); - DECLARE_2681_FIELD(ctl_ctlr); - DECLARE_2681_FIELD(mrb); - DECLARE_2681_FIELD(srb_csrb); - DECLARE_2681_FIELD(tst_crb); - DECLARE_2681_FIELD(rhrb_thrb); - DECLARE_2681_FIELD(reserved); - DECLARE_2681_FIELD(ip_opcr); - DECLARE_2681_FIELD(startCnt_setOutBit); - DECLARE_2681_FIELD(stopCnt_resetOutBit); - -}; - -#if 0 -struct mc146818 { - - unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4, - minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4; - unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4, - day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4; - unsigned int month1:4, month2:4, year1:4, year2:4, :16; - -}; -#endif - -struct mc146818 { - unsigned char second, alarm_second; - unsigned char minute, alarm_minute; - unsigned char hours, alarm_hours; - unsigned char day_of_week, day_of_month; - unsigned char month, year; -}; - - -#define IO_BASE 0x80000000 - -extern u_long sio01_physaddr; -extern u_long sio23_physaddr; -extern u_long rtc_physaddr; -extern u_long pica_physaddr; -extern u_long picb_physaddr; -extern u_long cpuctrl_physaddr; -extern u_long timer_physaddr; - -#define SAU7_SIO01_PHYSADDR 0x10400 -#define SAU7_SIO23_PHYSADDR 0x10500 -#define SAU7_RTC_PHYSADDR 0x10900 -#define SAU7_PICA 0x11000 -#define SAU7_PICB 0x11100 -#define SAU7_CPUCTRL 0x10100 -#define SAU7_TIMER 0x010800 - -#define SAU8_SIO01_PHYSADDR 0x8400 -#define SAU8_RTC_PHYSADDR 0x8900 -#define SAU8_PICA 0x9400 -#define SAU8_PICB 0x9500 -#define SAU8_CPUCTRL 0x8100 -#define SAU8_TIMER 0x8800 - -#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr))) -#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr))) -#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr))) -#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) -#define pica (IO_BASE + pica_physaddr) -#define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) -#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) - -#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) - -#define IRQ_APOLLO IRQ_USER - -#endif diff --git a/include/asm-m68k/atafd.h b/include/asm-m68k/atafd.h deleted file mode 100644 index 8456889..0000000 --- a/include/asm-m68k/atafd.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M68K_FD_H -#define _ASM_M68K_FD_H - -/* Definitions for the Atari Floppy driver */ - -struct atari_format_descr { - int track; /* to be formatted */ - int head; /* "" "" */ - int sect_offset; /* offset of first sector */ -}; - -#endif diff --git a/include/asm-m68k/atafdreg.h b/include/asm-m68k/atafdreg.h deleted file mode 100644 index bbf8094..0000000 --- a/include/asm-m68k/atafdreg.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef _LINUX_FDREG_H -#define _LINUX_FDREG_H - -/* -** WD1772 stuff - */ - -/* register codes */ - -#define FDCSELREG_STP (0x80) /* command/status register */ -#define FDCSELREG_TRA (0x82) /* track register */ -#define FDCSELREG_SEC (0x84) /* sector register */ -#define FDCSELREG_DTA (0x86) /* data register */ - -/* register names for FDC_READ/WRITE macros */ - -#define FDCREG_CMD 0 -#define FDCREG_STATUS 0 -#define FDCREG_TRACK 2 -#define FDCREG_SECTOR 4 -#define FDCREG_DATA 6 - -/* command opcodes */ - -#define FDCCMD_RESTORE (0x00) /* - */ -#define FDCCMD_SEEK (0x10) /* | */ -#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */ -#define FDCCMD_STIN (0x40) /* | */ -#define FDCCMD_STOT (0x60) /* - */ -#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */ -#define FDCCMD_WRSEC (0xa0) /* - " */ -#define FDCCMD_RDADR (0xc0) /* - */ -#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */ -#define FDCCMD_WRTRA (0xf0) /* - */ -#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */ - -/* command modifier bits */ - -#define FDCCMDADD_SR6 (0x00) /* step rate settings */ -#define FDCCMDADD_SR12 (0x01) -#define FDCCMDADD_SR2 (0x02) -#define FDCCMDADD_SR3 (0x03) -#define FDCCMDADD_V (0x04) /* verify */ -#define FDCCMDADD_H (0x08) /* wait for spin-up */ -#define FDCCMDADD_U (0x10) /* update track register */ -#define FDCCMDADD_M (0x10) /* multiple sector access */ -#define FDCCMDADD_E (0x04) /* head settling flag */ -#define FDCCMDADD_P (0x02) /* precompensation off */ -#define FDCCMDADD_A0 (0x01) /* DAM flag */ - -/* status register bits */ - -#define FDCSTAT_MOTORON (0x80) /* motor on */ -#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */ -#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */ -#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */ -#define FDCSTAT_RECNF (0x10) /* record not found */ -#define FDCSTAT_CRC (0x08) /* CRC error */ -#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */ -#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */ -#define FDCSTAT_IDX (0x02) /* Index status (Type I) */ -#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */ -#define FDCSTAT_BUSY (0x01) /* FDC is busy */ - - -/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */ -#define DSKSIDE (0x01) - -#define DSKDRVNONE (0x06) -#define DSKDRV0 (0x02) -#define DSKDRV1 (0x04) - -/* step rates */ -#define FDCSTEP_6 0x00 -#define FDCSTEP_12 0x01 -#define FDCSTEP_2 0x02 -#define FDCSTEP_3 0x03 - -#endif diff --git a/include/asm-m68k/atari_joystick.h b/include/asm-m68k/atari_joystick.h deleted file mode 100644 index 93be7da..0000000 --- a/include/asm-m68k/atari_joystick.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _LINUX_ATARI_JOYSTICK_H -#define _LINUX_ATARI_JOYSTICK_H - -/* - * linux/include/linux/atari_joystick.h - * header file for Atari Joystick driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -void atari_joystick_interrupt(char*); -int atari_joystick_init(void); -extern int atari_mouse_buttons; - -struct joystick_status { - char fire; - char dir; - int ready; - int active; - wait_queue_head_t wait; -}; - -#endif diff --git a/include/asm-m68k/atari_stdma.h b/include/asm-m68k/atari_stdma.h deleted file mode 100644 index 8e389b7..0000000 --- a/include/asm-m68k/atari_stdma.h +++ /dev/null @@ -1,22 +0,0 @@ - -#ifndef _atari_stdma_h -#define _atari_stdma_h - - -#include - - -/***************************** Prototypes *****************************/ - -void stdma_lock(irq_handler_t handler, void *data); -void stdma_release( void ); -int stdma_others_waiting( void ); -int stdma_islocked( void ); -void *stdma_locked_by( void ); -void stdma_init( void ); - -/************************* End of Prototypes **************************/ - - - -#endif /* _atari_stdma_h */ diff --git a/include/asm-m68k/atari_stram.h b/include/asm-m68k/atari_stram.h deleted file mode 100644 index 7546d13..0000000 --- a/include/asm-m68k/atari_stram.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _M68K_ATARI_STRAM_H -#define _M68K_ATARI_STRAM_H - -/* - * Functions for Atari ST-RAM management - */ - -/* public interface */ -void *atari_stram_alloc(long size, const char *owner); -void atari_stram_free(void *); - -/* functions called internally by other parts of the kernel */ -void atari_stram_init(void); -void atari_stram_reserve_pages(void *start_mem); -void atari_stram_mem_init_hook (void); - -#endif /*_M68K_ATARI_STRAM_H */ diff --git a/include/asm-m68k/atarihw.h b/include/asm-m68k/atarihw.h deleted file mode 100644 index 1412b4a..0000000 --- a/include/asm-m68k/atarihw.h +++ /dev/null @@ -1,807 +0,0 @@ -/* -** linux/atarihw.h -- This header defines some macros and pointers for -** the various Atari custom hardware registers. -** -** Copyright 1994 by Björn Brauel -** -** 5/1/94 Roman Hodek: -** Added definitions for TT specific chips. -** -** 1996-09-13 lars brinkhoff : -** Finally added definitions for the matrix/codec and the DSP56001 host -** interface. -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _LINUX_ATARIHW_H_ -#define _LINUX_ATARIHW_H_ - -#include -#include -#include - -extern u_long atari_mch_cookie; -extern u_long atari_mch_type; -extern u_long atari_switches; -extern int atari_rtc_year_offset; -extern int atari_dont_touch_floppy_select; - -/* convenience macros for testing machine type */ -#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST) -#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ - (atari_mch_cookie & 0xffff) == 0) -#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ - (atari_mch_cookie & 0xffff) == 0x10) -#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT) -#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON) -#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA) -#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40) - -/* values for atari_switches */ -#define ATARI_SWITCH_IKBD 0x01 -#define ATARI_SWITCH_MIDI 0x02 -#define ATARI_SWITCH_SND6 0x04 -#define ATARI_SWITCH_SND7 0x08 -#define ATARI_SWITCH_OVSC_SHIFT 16 -#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_MASK 0xffff0000 - -/* - * Define several Hardware-Chips for indication so that for the ATARI we do - * no longer decide whether it is a Falcon or other machine . It's just - * important what hardware the machine uses - */ - -/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */ - -#define ATARIHW_DECLARE(name) unsigned name : 1 -#define ATARIHW_SET(name) (atari_hw_present.name = 1) -#define ATARIHW_PRESENT(name) (atari_hw_present.name) - -struct atari_hw_present { - /* video hardware */ - ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */ - ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */ - ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */ - ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */ - /* sound hardware */ - ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */ - ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */ - ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */ - /* disk storage interfaces */ - ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */ - ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */ - ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */ - ATARIHW_DECLARE(IDE); /* IDE Interface */ - ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */ - /* other I/O hardware */ - ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari - without it... but who knows?) */ - ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */ - ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */ - ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */ - ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe - and Falcon */ - ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */ - /* DMA */ - ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */ - ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */ - ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */ - ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */ - /* real time clocks */ - ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */ - ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */ - /* supporting hardware */ - ATARIHW_DECLARE(SCU); /* System Control Unit */ - ATARIHW_DECLARE(BLITTER); /* Blitter */ - ATARIHW_DECLARE(VME); /* VME Bus */ - ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */ -}; - -extern struct atari_hw_present atari_hw_present; - - -/* Reading the MFP port register gives a machine independent delay, since the - * MFP always has a 8 MHz clock. This avoids problems with the varying length - * of nops on various machines. Somebody claimed that the tstb takes 600 ns. - */ -#define MFPDELAY() \ - __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" ); - -/* Do cache push/invalidate for DMA read/write. This function obeys the - * snooping on some machines (Medusa) and processors: The Medusa itself can - * snoop, but only the '040 can source data from its cache to DMA writes i.e., - * reads from memory). Both '040 and '060 invalidate cache entries on snooped - * DMA reads (i.e., writes to memory). - */ - - -#define atari_readb raw_inb -#define atari_writeb raw_outb - -#define atari_inb_p raw_inb -#define atari_outb_p raw_outb - - - -#include -#include - -static inline void dma_cache_maintenance( unsigned long paddr, - unsigned long len, - int writeflag ) - -{ - if (writeflag) { - if (!MACH_IS_MEDUSA || CPU_IS_060) - cache_push( paddr, len ); - } - else { - if (!MACH_IS_MEDUSA) - cache_clear( paddr, len ); - } -} - - -/* -** Shifter - */ -#define ST_LOW 0 -#define ST_MID 1 -#define ST_HIGH 2 -#define TT_LOW 7 -#define TT_MID 4 -#define TT_HIGH 6 - -#define SHF_BAS (0xffff8200) -struct SHIFTER - { - u_char pad1; - u_char bas_hi; - u_char pad2; - u_char bas_md; - u_char pad3; - u_char volatile vcounthi; - u_char pad4; - u_char volatile vcountmid; - u_char pad5; - u_char volatile vcountlow; - u_char volatile syncmode; - u_char pad6; - u_char pad7; - u_char bas_lo; - }; -# define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) - -#define SHF_FBAS (0xffff820e) -struct SHIFTER_F030 - { - u_short off_next; - u_short scn_width; - }; -# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS)) - - -#define SHF_TBAS (0xffff8200) -struct SHIFTER_TT { - u_char char_dummy0; - u_char bas_hi; /* video mem base addr, high and mid byte */ - u_char char_dummy1; - u_char bas_md; - u_char char_dummy2; - u_char vcount_hi; /* pointer to currently displayed byte */ - u_char char_dummy3; - u_char vcount_md; - u_char char_dummy4; - u_char vcount_lo; - u_short st_sync; /* ST compatible sync mode register, unused */ - u_char char_dummy5; - u_char bas_lo; /* video mem addr, low byte */ - u_char char_dummy6[2+3*16]; - /* $ffff8240: */ - u_short color_reg[16]; /* 16 color registers */ - u_char st_shiftmode; /* ST compatible shift mode register, unused */ - u_char char_dummy7; - u_short tt_shiftmode; /* TT shift mode register */ - - -}; -#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS)) - -/* values for shifter_tt->tt_shiftmode */ -#define TT_SHIFTER_STLOW 0x0000 -#define TT_SHIFTER_STMID 0x0100 -#define TT_SHIFTER_STHIGH 0x0200 -#define TT_SHIFTER_TTLOW 0x0700 -#define TT_SHIFTER_TTMID 0x0400 -#define TT_SHIFTER_TTHIGH 0x0600 -#define TT_SHIFTER_MODEMASK 0x0700 -#define TT_SHIFTER_NUMMODE 0x0008 -#define TT_SHIFTER_PALETTE_MASK 0x000f -#define TT_SHIFTER_GRAYMODE 0x1000 - -/* 256 TT palette registers */ -#define TT_PALETTE_BASE (0xffff8400) -#define tt_palette ((volatile u_short *)TT_PALETTE_BASE) - -#define TT_PALETTE_RED_MASK 0x0f00 -#define TT_PALETTE_GREEN_MASK 0x00f0 -#define TT_PALETTE_BLUE_MASK 0x000f - -/* -** Falcon030 VIDEL Video Controller -** for description see File 'linux\tools\atari\hardware.txt - */ -#define f030_col ((u_long *) 0xffff9800) -#define f030_xreg ((u_short*) 0xffff8282) -#define f030_yreg ((u_short*) 0xffff82a2) -#define f030_creg ((u_short*) 0xffff82c0) -#define f030_sreg ((u_short*) 0xffff8260) -#define f030_mreg ((u_short*) 0xffff820a) -#define f030_linewidth ((u_short*) 0xffff820e) -#define f030_hscroll ((u_char*) 0xffff8265) - -#define VIDEL_BAS (0xffff8260) -struct VIDEL { - u_short st_shift; - u_short pad1; - u_char xoffset_s; - u_char xoffset; - u_short f_shift; - u_char pad2[0x1a]; - u_short hht; - u_short hbb; - u_short hbe; - u_short hdb; - u_short hde; - u_short hss; - u_char pad3[0x14]; - u_short vft; - u_short vbb; - u_short vbe; - u_short vdb; - u_short vde; - u_short vss; - u_char pad4[0x12]; - u_short control; - u_short mode; -}; -#define videl ((*(volatile struct VIDEL *)VIDEL_BAS)) - -/* -** DMA/WD1772 Disk Controller - */ - -#define FWD_BAS (0xffff8604) -struct DMA_WD - { - u_short fdc_acces_seccount; - u_short dma_mode_status; - u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */ - u_char dma_hi; - u_char char_dummy2; - u_char dma_md; - u_char char_dummy3; - u_char dma_lo; - u_short fdc_speed; - }; -# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS)) -/* alias */ -#define st_dma dma_wd -/* The two highest bytes of an extended DMA as a short; this is a must - * for the Medusa. - */ -#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608)) - -/* -** YM2149 Sound Chip -** access in bytes - */ - -#define YM_BAS (0xffff8800) -struct SOUND_YM - { - u_char rd_data_reg_sel; - u_char char_dummy1; - u_char wd_data; - }; -#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS)) - -/* TT SCSI DMA */ - -#define TT_SCSI_DMA_BAS (0xffff8700) -struct TT_DMA { - u_char char_dummy0; - u_char dma_addr_hi; - u_char char_dummy1; - u_char dma_addr_hmd; - u_char char_dummy2; - u_char dma_addr_lmd; - u_char char_dummy3; - u_char dma_addr_lo; - u_char char_dummy4; - u_char dma_cnt_hi; - u_char char_dummy5; - u_char dma_cnt_hmd; - u_char char_dummy6; - u_char dma_cnt_lmd; - u_char char_dummy7; - u_char dma_cnt_lo; - u_long dma_restdata; - u_short dma_ctrl; -}; -#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS)) - -/* TT SCSI Controller 5380 */ - -#define TT_5380_BAS (0xffff8781) -struct TT_5380 { - u_char scsi_data; - u_char char_dummy1; - u_char scsi_icr; - u_char char_dummy2; - u_char scsi_mode; - u_char char_dummy3; - u_char scsi_tcr; - u_char char_dummy4; - u_char scsi_idstat; - u_char char_dummy5; - u_char scsi_dmastat; - u_char char_dummy6; - u_char scsi_targrcv; - u_char char_dummy7; - u_char scsi_inircv; -}; -#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS)) -#define tt_scsi_regp ((volatile char *)TT_5380_BAS) - - -/* -** Falcon DMA Sound Subsystem - */ - -#define MATRIX_BASE (0xffff8930) -struct MATRIX -{ - u_short source; - u_short destination; - u_char external_frequency_divider; - u_char internal_frequency_divider; -}; -#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE) - -#define CODEC_BASE (0xffff8936) -struct CODEC -{ - u_char tracks; - u_char input_source; -#define CODEC_SOURCE_ADC 1 -#define CODEC_SOURCE_MATRIX 2 - u_char adc_source; -#define ADC_SOURCE_RIGHT_PSG 1 -#define ADC_SOURCE_LEFT_PSG 2 - u_char gain; -#define CODEC_GAIN_RIGHT 0x0f -#define CODEC_GAIN_LEFT 0xf0 - u_char attenuation; -#define CODEC_ATTENUATION_RIGHT 0x0f -#define CODEC_ATTENUATION_LEFT 0xf0 - u_char unused1; - u_char status; -#define CODEC_OVERFLOW_RIGHT 1 -#define CODEC_OVERFLOW_LEFT 2 - u_char unused2, unused3, unused4, unused5; - u_char gpio_directions; -#define GPIO_IN 0 -#define GPIO_OUT 1 - u_char unused6; - u_char gpio_data; -}; -#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE) - -/* -** Falcon Blitter -*/ - -#define BLT_BAS (0xffff8a00) - -struct BLITTER - { - u_short halftone[16]; - u_short src_x_inc; - u_short src_y_inc; - u_long src_address; - u_short endmask1; - u_short endmask2; - u_short endmask3; - u_short dst_x_inc; - u_short dst_y_inc; - u_long dst_address; - u_short wd_per_line; - u_short ln_per_bb; - u_short hlf_op_reg; - u_short log_op_reg; - u_short lin_nm_reg; - u_short skew_reg; - }; -# define blitter ((*(volatile struct BLITTER *)BLT_BAS)) - - -/* -** SCC Z8530 - */ - -#define SCC_BAS (0xffff8c81) -struct SCC - { - u_char cha_a_ctrl; - u_char char_dummy1; - u_char cha_a_data; - u_char char_dummy2; - u_char cha_b_ctrl; - u_char char_dummy3; - u_char cha_b_data; - }; -# define scc ((*(volatile struct SCC*)SCC_BAS)) - -/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */ -# define st_escc ((*(volatile struct SCC*)0xfffffa31)) -# define st_escc_dsr ((*(volatile char *)0xfffffa39)) - -/* TT SCC DMA Controller (same chip as SCSI DMA) */ - -#define TT_SCC_DMA_BAS (0xffff8c00) -#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS)) - -/* -** VIDEL Palette Register - */ - -#define FPL_BAS (0xffff9800) -struct VIDEL_PALETTE - { - u_long reg[256]; - }; -# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS)) - - -/* -** Falcon DSP Host Interface - */ - -#define DSP56K_HOST_INTERFACE_BASE (0xffffa200) -struct DSP56K_HOST_INTERFACE { - u_char icr; -#define DSP56K_ICR_RREQ 0x01 -#define DSP56K_ICR_TREQ 0x02 -#define DSP56K_ICR_HF0 0x08 -#define DSP56K_ICR_HF1 0x10 -#define DSP56K_ICR_HM0 0x20 -#define DSP56K_ICR_HM1 0x40 -#define DSP56K_ICR_INIT 0x80 - - u_char cvr; -#define DSP56K_CVR_HV_MASK 0x1f -#define DSP56K_CVR_HC 0x80 - - u_char isr; -#define DSP56K_ISR_RXDF 0x01 -#define DSP56K_ISR_TXDE 0x02 -#define DSP56K_ISR_TRDY 0x04 -#define DSP56K_ISR_HF2 0x08 -#define DSP56K_ISR_HF3 0x10 -#define DSP56K_ISR_DMA 0x40 -#define DSP56K_ISR_HREQ 0x80 - - u_char ivr; - - union { - u_char b[4]; - u_short w[2]; - u_long l; - } data; -}; -#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE)) - -/* -** MFP 68901 - */ - -#define MFP_BAS (0xfffffa01) -struct MFP - { - u_char par_dt_reg; - u_char char_dummy1; - u_char active_edge; - u_char char_dummy2; - u_char data_dir; - u_char char_dummy3; - u_char int_en_a; - u_char char_dummy4; - u_char int_en_b; - u_char char_dummy5; - u_char int_pn_a; - u_char char_dummy6; - u_char int_pn_b; - u_char char_dummy7; - u_char int_sv_a; - u_char char_dummy8; - u_char int_sv_b; - u_char char_dummy9; - u_char int_mk_a; - u_char char_dummy10; - u_char int_mk_b; - u_char char_dummy11; - u_char vec_adr; - u_char char_dummy12; - u_char tim_ct_a; - u_char char_dummy13; - u_char tim_ct_b; - u_char char_dummy14; - u_char tim_ct_cd; - u_char char_dummy15; - u_char tim_dt_a; - u_char char_dummy16; - u_char tim_dt_b; - u_char char_dummy17; - u_char tim_dt_c; - u_char char_dummy18; - u_char tim_dt_d; - u_char char_dummy19; - u_char sync_char; - u_char char_dummy20; - u_char usart_ctr; - u_char char_dummy21; - u_char rcv_stat; - u_char char_dummy22; - u_char trn_stat; - u_char char_dummy23; - u_char usart_dta; - }; -# define mfp ((*(volatile struct MFP*)MFP_BAS)) - -/* TT's second MFP */ - -#define TT_MFP_BAS (0xfffffa81) -# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS)) - - -/* TT System Control Unit */ - -#define TT_SCU_BAS (0xffff8e01) -struct TT_SCU { - u_char sys_mask; - u_char char_dummy1; - u_char sys_stat; - u_char char_dummy2; - u_char softint; - u_char char_dummy3; - u_char vmeint; - u_char char_dummy4; - u_char gp_reg1; - u_char char_dummy5; - u_char gp_reg2; - u_char char_dummy6; - u_char vme_mask; - u_char char_dummy7; - u_char vme_stat; -}; -#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS)) - -/* TT real time clock */ - -#define TT_RTC_BAS (0xffff8961) -struct TT_RTC { - u_char regsel; - u_char dummy; - u_char data; -}; -#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS)) - - -/* -** ACIA 6850 - */ -/* constants for the ACIA registers */ - -/* baudrate selection and reset (Baudrate = clock/factor) */ -#define ACIA_DIV1 0 -#define ACIA_DIV16 1 -#define ACIA_DIV64 2 -#define ACIA_RESET 3 - -/* character format */ -#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */ -#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */ -#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */ -#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */ -#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */ -#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */ -#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */ -#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */ - -/* transmit control */ -#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */ -#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */ -#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */ -#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */ - -/* receive control */ -#define ACIA_RID (0<<7) /* RxINT disabled */ -#define ACIA_RIE (1<<7) /* RxINT enabled */ - -/* status fields of the ACIA */ -#define ACIA_RDRF 1 /* Receive Data Register Full */ -#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */ -#define ACIA_DCD (1<<2) /* Data Carrier Detect */ -#define ACIA_CTS (1<<3) /* Clear To Send */ -#define ACIA_FE (1<<4) /* Framing Error */ -#define ACIA_OVRN (1<<5) /* Receiver Overrun */ -#define ACIA_PE (1<<6) /* Parity Error */ -#define ACIA_IRQ (1<<7) /* Interrupt Request */ - -#define ACIA_BAS (0xfffffc00) -struct ACIA - { - u_char key_ctrl; - u_char char_dummy1; - u_char key_data; - u_char char_dummy2; - u_char mid_ctrl; - u_char char_dummy3; - u_char mid_data; - }; -# define acia ((*(volatile struct ACIA*)ACIA_BAS)) - -#define TT_DMASND_BAS (0xffff8900) -struct TT_DMASND { - u_char int_ctrl; /* Falcon: Interrupt control */ - u_char ctrl; - u_char pad2; - u_char bas_hi; - u_char pad3; - u_char bas_mid; - u_char pad4; - u_char bas_low; - u_char pad5; - u_char addr_hi; - u_char pad6; - u_char addr_mid; - u_char pad7; - u_char addr_low; - u_char pad8; - u_char end_hi; - u_char pad9; - u_char end_mid; - u_char pad10; - u_char end_low; - u_char pad11[12]; - u_char track_select; /* Falcon */ - u_char mode; - u_char pad12[14]; - /* Falcon only: */ - u_short cbar_src; - u_short cbar_dst; - u_char ext_div; - u_char int_div; - u_char rec_track_select; - u_char dac_src; - u_char adc_src; - u_char input_gain; - u_short output_atten; -}; -# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS)) - -#define DMASND_MFP_INT_REPLAY 0x01 -#define DMASND_MFP_INT_RECORD 0x02 -#define DMASND_TIMERA_INT_REPLAY 0x04 -#define DMASND_TIMERA_INT_RECORD 0x08 - -#define DMASND_CTRL_OFF 0x00 -#define DMASND_CTRL_ON 0x01 -#define DMASND_CTRL_REPEAT 0x02 -#define DMASND_CTRL_RECORD_ON 0x10 -#define DMASND_CTRL_RECORD_OFF 0x00 -#define DMASND_CTRL_RECORD_REPEAT 0x20 -#define DMASND_CTRL_SELECT_REPLAY 0x00 -#define DMASND_CTRL_SELECT_RECORD 0x80 -#define DMASND_MODE_MONO 0x80 -#define DMASND_MODE_STEREO 0x00 -#define DMASND_MODE_8BIT 0x00 -#define DMASND_MODE_16BIT 0x40 /* Falcon only */ -#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */ -#define DMASND_MODE_12KHZ 0x01 -#define DMASND_MODE_25KHZ 0x02 -#define DMASND_MODE_50KHZ 0x03 - - -#define DMASNDSetBase(bufstart) \ - do { \ - tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \ - tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \ - tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \ - } while( 0 ) - -#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \ - (tt_dmasnd.addr_mid << 8) + \ - (tt_dmasnd.addr_low)) - -#define DMASNDSetEnd(bufend) \ - do { \ - tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \ - tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \ - tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \ - } while( 0 ) - - -#define TT_MICROWIRE_BAS (0xffff8922) -struct TT_MICROWIRE { - u_short data; - u_short mask; -}; -# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS)) - -#define MW_LM1992_ADDR 0x0400 - -#define MW_LM1992_VOLUME(dB) \ - (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2))) -#define MW_LM1992_BALLEFT(dB) \ - (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) -#define MW_LM1992_BALRIGHT(dB) \ - (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) -#define MW_LM1992_TREBLE(dB) \ - (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) -#define MW_LM1992_BASS(dB) \ - (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) - -#define MW_LM1992_PSG_LOW 0x000 -#define MW_LM1992_PSG_HIGH 0x001 -#define MW_LM1992_PSG_OFF 0x002 - -#define MSTE_RTC_BAS (0xfffffc21) - -struct MSTE_RTC { - u_char sec_ones; - u_char dummy1; - u_char sec_tens; - u_char dummy2; - u_char min_ones; - u_char dummy3; - u_char min_tens; - u_char dummy4; - u_char hr_ones; - u_char dummy5; - u_char hr_tens; - u_char dummy6; - u_char weekday; - u_char dummy7; - u_char day_ones; - u_char dummy8; - u_char day_tens; - u_char dummy9; - u_char mon_ones; - u_char dummy10; - u_char mon_tens; - u_char dummy11; - u_char year_ones; - u_char dummy12; - u_char year_tens; - u_char dummy13; - u_char mode; - u_char dummy14; - u_char test; - u_char dummy15; - u_char reset; -}; - -#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS)) - -#endif /* linux/atarihw.h */ - diff --git a/include/asm-m68k/atariints.h b/include/asm-m68k/atariints.h deleted file mode 100644 index 5748e99..0000000 --- a/include/asm-m68k/atariints.h +++ /dev/null @@ -1,204 +0,0 @@ -/* -** atariints.h -- Atari Linux interrupt handling structs and prototypes -** -** Copyright 1994 by Björn Brauel -** -** 5/2/94 Roman Hodek: -** TT interrupt definitions added. -** -** 12/02/96: (Roman) -** Adapted to new int handling scheme (see ataints.c); revised numbering -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _LINUX_ATARIINTS_H_ -#define _LINUX_ATARIINTS_H_ - -#include -#include - -/* -** Atari Interrupt sources. -** -*/ - -#define STMFP_SOURCE_BASE 8 -#define TTMFP_SOURCE_BASE 24 -#define SCC_SOURCE_BASE 40 -#define VME_SOURCE_BASE 56 -#define VME_MAX_SOURCES 16 - -#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE) - -/* convert vector number to int source number */ -#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8))) - -/* convert irq_handler index to vector number */ -#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8))) - -/* interrupt service types */ -#define IRQ_TYPE_SLOW 0 -#define IRQ_TYPE_FAST 1 -#define IRQ_TYPE_PRIO 2 - -/* ST-MFP interrupts */ -#define IRQ_MFP_BUSY (8) -#define IRQ_MFP_DCD (9) -#define IRQ_MFP_CTS (10) -#define IRQ_MFP_GPU (11) -#define IRQ_MFP_TIMD (12) -#define IRQ_MFP_TIMC (13) -#define IRQ_MFP_ACIA (14) -#define IRQ_MFP_FDC (15) -#define IRQ_MFP_ACSI IRQ_MFP_FDC -#define IRQ_MFP_FSCSI IRQ_MFP_FDC -#define IRQ_MFP_IDE IRQ_MFP_FDC -#define IRQ_MFP_TIMB (16) -#define IRQ_MFP_SERERR (17) -#define IRQ_MFP_SEREMPT (18) -#define IRQ_MFP_RECERR (19) -#define IRQ_MFP_RECFULL (20) -#define IRQ_MFP_TIMA (21) -#define IRQ_MFP_RI (22) -#define IRQ_MFP_MMD (23) - -/* TT-MFP interrupts */ -#define IRQ_TT_MFP_IO0 (24) -#define IRQ_TT_MFP_IO1 (25) -#define IRQ_TT_MFP_SCC (26) -#define IRQ_TT_MFP_RI (27) -#define IRQ_TT_MFP_TIMD (28) -#define IRQ_TT_MFP_TIMC (29) -#define IRQ_TT_MFP_DRVRDY (30) -#define IRQ_TT_MFP_SCSIDMA (31) -#define IRQ_TT_MFP_TIMB (32) -#define IRQ_TT_MFP_SERERR (33) -#define IRQ_TT_MFP_SEREMPT (34) -#define IRQ_TT_MFP_RECERR (35) -#define IRQ_TT_MFP_RECFULL (36) -#define IRQ_TT_MFP_TIMA (37) -#define IRQ_TT_MFP_RTC (38) -#define IRQ_TT_MFP_SCSI (39) - -/* SCC interrupts */ -#define IRQ_SCCB_TX (40) -#define IRQ_SCCB_STAT (42) -#define IRQ_SCCB_RX (44) -#define IRQ_SCCB_SPCOND (46) -#define IRQ_SCCA_TX (48) -#define IRQ_SCCA_STAT (50) -#define IRQ_SCCA_RX (52) -#define IRQ_SCCA_SPCOND (54) - - -#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ -#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ - - -#define MFP_ENABLE 0 -#define MFP_PENDING 1 -#define MFP_SERVICE 2 -#define MFP_MASK 3 - -/* Utility functions for setting/clearing bits in the interrupt registers of - * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is - * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */ - -static inline int get_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - return( *reg & mask ); -} - -static inline void set_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - __asm__ __volatile__ ( "orb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); -} - -static inline void clear_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = ~(1 << (irq & 7)); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - if (type == MFP_PENDING || type == MFP_SERVICE) - __asm__ __volatile__ ( "moveb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); - else - __asm__ __volatile__ ( "andb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); -} - -/* - * {en,dis}able_irq have the usual semantics of temporary blocking the - * interrupt, but not loosing requests that happen between disabling and - * enabling. This is done with the MFP mask registers. - */ - -static inline void atari_enable_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - set_mfp_bit( irq, MFP_MASK ); -} - -static inline void atari_disable_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_MASK ); -} - -/* - * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not - * "stored" - */ - -static inline void atari_turnon_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - set_mfp_bit( irq, MFP_ENABLE ); -} - -static inline void atari_turnoff_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_ENABLE ); - clear_mfp_bit( irq, MFP_PENDING ); -} - -static inline void atari_clear_pending_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_PENDING ); -} - -static inline int atari_irq_pending( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 ); - return( get_mfp_bit( irq, MFP_PENDING ) ); -} - -unsigned long atari_register_vme_int( void ); -void atari_unregister_vme_int( unsigned long ); - -#endif /* linux/atariints.h */ diff --git a/include/asm-m68k/atarikb.h b/include/asm-m68k/atarikb.h deleted file mode 100644 index 546e7da..0000000 --- a/include/asm-m68k/atarikb.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -** atarikb.h -- This header contains the prototypes of functions of -** the intelligent keyboard of the Atari needed by the -** mouse and joystick drivers. -** -** Copyright 1994 by Robert de Vries -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 20 Feb 1994 by Robert de Vries -*/ - -#ifndef _LINUX_ATARIKB_H -#define _LINUX_ATARIKB_H - -void ikbd_write(const char *, int); -void ikbd_mouse_button_action(int mode); -void ikbd_mouse_rel_pos(void); -void ikbd_mouse_abs_pos(int xmax, int ymax); -void ikbd_mouse_kbd_mode(int dx, int dy); -void ikbd_mouse_thresh(int x, int y); -void ikbd_mouse_scale(int x, int y); -void ikbd_mouse_pos_get(int *x, int *y); -void ikbd_mouse_pos_set(int x, int y); -void ikbd_mouse_y0_bot(void); -void ikbd_mouse_y0_top(void); -void ikbd_mouse_disable(void); -void ikbd_joystick_event_on(void); -void ikbd_joystick_event_off(void); -void ikbd_joystick_get_state(void); -void ikbd_joystick_disable(void); - -/* Hook for MIDI serial driver */ -extern void (*atari_MIDI_interrupt_hook) (void); -/* Hook for mouse driver */ -extern void (*atari_mouse_interrupt_hook) (char *); -/* Hook for keyboard inputdev driver */ -extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char); -/* Hook for mouse inputdev driver */ -extern void (*atari_input_mouse_interrupt_hook) (char *); - -int atari_keyb_init(void); - -#endif /* _LINUX_ATARIKB_H */ diff --git a/include/asm-m68k/atomic.h b/include/asm-m68k/atomic.h deleted file mode 100644 index eb0ab9d..0000000 --- a/include/asm-m68k/atomic.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef __ARCH_M68K_ATOMIC__ -#define __ARCH_M68K_ATOMIC__ - -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * We do not have SMP m68k systems, so we don't have to deal with that. - */ - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -static inline void atomic_add(int i, atomic_t *v) -{ - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i)); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i)); -} - -static inline void atomic_inc(atomic_t *v) -{ - __asm__ __volatile__("addql #1,%0" : "+m" (*v)); -} - -static inline void atomic_dec(atomic_t *v) -{ - __asm__ __volatile__("subql #1,%0" : "+m" (*v)); -} - -static inline int atomic_dec_and_test(atomic_t *v) -{ - char c; - __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static inline int atomic_inc_and_test(atomic_t *v) -{ - char c; - __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -#ifdef CONFIG_RMW_INSNS - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int t, tmp; - - __asm__ __volatile__( - "1: movel %2,%1\n" - " addl %3,%1\n" - " casl %2,%1,%0\n" - " jne 1b" - : "+m" (*v), "=&d" (t), "=&d" (tmp) - : "g" (i), "2" (atomic_read(v))); - return t; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int t, tmp; - - __asm__ __volatile__( - "1: movel %2,%1\n" - " subl %3,%1\n" - " casl %2,%1,%0\n" - " jne 1b" - : "+m" (*v), "=&d" (t), "=&d" (tmp) - : "g" (i), "2" (atomic_read(v))); - return t; -} - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -#else /* !CONFIG_RMW_INSNS */ - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned long flags; - int t; - - local_irq_save(flags); - t = atomic_read(v); - t += i; - atomic_set(v, t); - local_irq_restore(flags); - - return t; -} - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long flags; - int t; - - local_irq_save(flags); - t = atomic_read(v); - t -= i; - atomic_set(v, t); - local_irq_restore(flags); - - return t; -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - unsigned long flags; - int prev; - - local_irq_save(flags); - prev = atomic_read(v); - if (prev == old) - atomic_set(v, new); - local_irq_restore(flags); - return prev; -} - -static inline int atomic_xchg(atomic_t *v, int new) -{ - unsigned long flags; - int prev; - - local_irq_save(flags); - prev = atomic_read(v); - atomic_set(v, new); - local_irq_restore(flags); - return prev; -} - -#endif /* !CONFIG_RMW_INSNS */ - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -static inline int atomic_sub_and_test(int i, atomic_t *v) -{ - char c; - __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i)); - return c != 0; -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - char c; - __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); - return c != 0; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); -} - -static inline void atomic_set_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); -} - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* __ARCH_M68K_ATOMIC __ */ diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h deleted file mode 100644 index 844d6d5..0000000 --- a/include/asm-m68k/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h deleted file mode 100644 index 9bde784..0000000 --- a/include/asm-m68k/bitops.h +++ /dev/null @@ -1,464 +0,0 @@ -#ifndef _M68K_BITOPS_H -#define _M68K_BITOPS_H -/* - * Copyright 1992, Linus Torvalds. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include - -/* - * Require 68020 or better. - * - * They use the standard big-endian m680x0 bit ordering. - */ - -#define test_and_set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_set_bit(nr, vaddr) : \ - __generic_test_and_set_bit(nr, vaddr)) - -#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr) - -static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_set_bit(nr, vaddr) : \ - __generic_set_bit(nr, vaddr)) - -#define __set_bit(nr,vaddr) set_bit(nr,vaddr) - -static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bset %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfset %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_clear_bit(nr, vaddr) : \ - __generic_test_and_clear_bit(nr, vaddr)) - -#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr) - -static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#define clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_clear_bit(nr, vaddr) : \ - __generic_clear_bit(nr, vaddr)) -#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr) - -static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfclr %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_change_bit(nr, vaddr) : \ - __generic_test_and_change_bit(nr, vaddr)) - -#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr) -#define __change_bit(nr,vaddr) change_bit(nr,vaddr) - -static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_change_bit(nr, vaddr) : \ - __generic_change_bit(nr, vaddr)) - -static inline void __constant_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_change_bit(int nr, unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfchg %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -static inline int test_bit(int nr, const unsigned long *vaddr) -{ - return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; -} - -static inline int find_first_zero_bit(const unsigned long *vaddr, - unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned long num; - - if (!size) - return 0; - - size = (size + 31) >> 5; - while (!(num = ~*p++)) { - if (!--size) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - return ((long)p - (long)vaddr - 4) * 8 + res; -} - -static inline int find_next_zero_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = ~*p++ & (~0UL << bit); - offset -= bit; - - /* Look for zero in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); - offset += 32; - } - /* No zero yet, search remaining full bytes for a zero */ - res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; -} - -static inline int find_first_bit(const unsigned long *vaddr, unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned long num; - - if (!size) - return 0; - - size = (size + 31) >> 5; - while (!(num = *p++)) { - if (!--size) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - return ((long)p - (long)vaddr - 4) * 8 + res; -} - -static inline int find_next_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = *p++ & (~0UL << bit); - offset -= bit; - - /* Look for one in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); - offset += 32; - } - /* No one yet, search remaining full bytes for a one */ - res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; -} - -/* - * ffz = Find First Zero in word. Undefined if no zero exists, - * so code should check against ~0UL first.. - */ -static inline unsigned long ffz(unsigned long word) -{ - int res; - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (~word & -~word)); - return res ^ 31; -} - -#ifdef __KERNEL__ - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -static inline int ffs(int x) -{ - int cnt; - - asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x)); - - return 32 - cnt; -} -#define __ffs(x) (ffs(x) - 1) - -/* - * fls: find last bit set. - */ - -static inline int fls(int x) -{ - int cnt; - - asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x)); - - return 32 - cnt; -} - -static inline int __fls(int x) -{ - return fls(x) - 1; -} - -#include -#include -#include -#include - -/* Bitmap functions for the minix filesystem */ - -static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) -{ - const unsigned short *p = vaddr, *addr = vaddr; - int res; - unsigned short num; - - if (!size) - return 0; - - size = (size >> 4) + ((size & 15) > 0); - while (*p++ == 0xffff) - { - if (--size == 0) - return (p - addr) << 4; - } - - num = ~*--p; - __asm__ __volatile__ ("bfffo %1{#16,#16},%0" - : "=d" (res) : "d" (num & -num)); - return ((p - addr) << 4) + (res ^ 31); -} - -#define minix_test_and_set_bit(nr, addr) __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr)) -#define minix_set_bit(nr,addr) __set_bit((nr) ^ 16, (unsigned long *)(addr)) -#define minix_test_and_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr)) - -static inline int minix_test_bit(int nr, const void *vaddr) -{ - const unsigned short *p = vaddr; - return (p[nr >> 4] & (1U << (nr & 15))) != 0; -} - -/* Bitmap functions for the ext2 filesystem. */ - -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) - -static inline int ext2_test_bit(int nr, const void *vaddr) -{ - const unsigned char *p = vaddr; - return (p[nr >> 3] & (1U << (nr & 7))) != 0; -} - -static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res; - - if (!size) - return 0; - - size = (size >> 5) + ((size & 31) > 0); - while (*p++ == ~0UL) - { - if (--size == 0) - return (p - addr) << 5; - } - - --p; - for (res = 0; res < 32; res++) - if (!ext2_test_bit (res, p)) - break; - return (p - addr) * 32 + res; -} - -static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, - unsigned offset) -{ - const unsigned long *addr = vaddr; - const unsigned long *p = addr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - /* Look for zero in first longword */ - for (res = bit; res < 32; res++) - if (!ext2_test_bit (res, p)) - return (p - addr) * 32 + res; - p++; - } - /* No zero yet, search remaining full bytes for a zero */ - res = ext2_find_first_zero_bit (p, size - 32 * (p - addr)); - return (p - addr) * 32 + res; -} - -static inline int ext2_find_first_bit(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res; - - if (!size) - return 0; - - size = (size >> 5) + ((size & 31) > 0); - while (*p++ == 0UL) { - if (--size == 0) - return (p - addr) << 5; - } - - --p; - for (res = 0; res < 32; res++) - if (ext2_test_bit(res, p)) - break; - return (p - addr) * 32 + res; -} - -static inline int ext2_find_next_bit(const void *vaddr, unsigned size, - unsigned offset) -{ - const unsigned long *addr = vaddr; - const unsigned long *p = addr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - /* Look for one in first longword */ - for (res = bit; res < 32; res++) - if (ext2_test_bit(res, p)) - return (p - addr) * 32 + res; - p++; - } - /* No set bit yet, search remaining full bytes for a set bit */ - res = ext2_find_first_bit(p, size - 32 * (p - addr)); - return (p - addr) * 32 + res; -} - -#endif /* __KERNEL__ */ - -#endif /* _M68K_BITOPS_H */ diff --git a/include/asm-m68k/blinken.h b/include/asm-m68k/blinken.h deleted file mode 100644 index 1a749cf..0000000 --- a/include/asm-m68k/blinken.h +++ /dev/null @@ -1,32 +0,0 @@ -/* -** asm/blinken.h -- m68k blinkenlights support (currently hp300 only) -** -** (c) 1998 Phil Blundell -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _M68K_BLINKEN_H -#define _M68K_BLINKEN_H - -#include -#include - -#define HP300_LEDS 0xf001ffff - -extern unsigned char ledstate; - -static __inline__ void blinken_leds(int on, int off) -{ - if (MACH_IS_HP300) - { - ledstate |= on; - ledstate &= ~off; - out_8(HP300_LEDS, ~ledstate); - } -} - -#endif diff --git a/include/asm-m68k/bootinfo.h b/include/asm-m68k/bootinfo.h deleted file mode 100644 index fb8a06b..0000000 --- a/include/asm-m68k/bootinfo.h +++ /dev/null @@ -1,378 +0,0 @@ -/* -** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 09/29/92 by Greg Harp -** -** 5/2/94 Roman Hodek: -** Added bi_atari part of the machine dependent union bi_un; for now it -** contains just a model field to distinguish between TT and Falcon. -** 26/7/96 Roman Zippel: -** Renamed to setup.h; added some useful macros to allow gcc some -** optimizations if possible. -** 5/10/96 Geert Uytterhoeven: -** Redesign of the boot information structure; renamed to bootinfo.h again -** 27/11/96 Geert Uytterhoeven: -** Backwards compatibility with bootinfo interface version 1.0 -*/ - -#ifndef _M68K_BOOTINFO_H -#define _M68K_BOOTINFO_H - - - /* - * Bootinfo definitions - * - * This is an easily parsable and extendable structure containing all - * information to be passed from the bootstrap to the kernel. - * - * This way I hope to keep all future changes back/forewards compatible. - * Thus, keep your fingers crossed... - * - * This structure is copied right after the kernel bss by the bootstrap - * routine. - */ - -#ifndef __ASSEMBLY__ - -struct bi_record { - unsigned short tag; /* tag ID */ - unsigned short size; /* size of record (in bytes) */ - unsigned long data[0]; /* data */ -}; - -#endif /* __ASSEMBLY__ */ - - - /* - * Tag Definitions - * - * Machine independent tags start counting from 0x0000 - * Machine dependent tags start counting from 0x8000 - */ - -#define BI_LAST 0x0000 /* last record (sentinel) */ -#define BI_MACHTYPE 0x0001 /* machine type (u_long) */ -#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */ -#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */ -#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */ -#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */ - /* (struct mem_info) */ -#define BI_RAMDISK 0x0006 /* ramdisk address and size */ - /* (struct mem_info) */ -#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */ - /* (string) */ - - /* - * Amiga-specific tags - */ - -#define BI_AMIGA_MODEL 0x8000 /* model (u_long) */ -#define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */ - /* (struct ConfigDev) */ -#define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (u_long) */ -#define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (u_char) */ -#define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (u_char) */ -#define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (u_long) */ -#define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (u_long) */ -#define BI_AMIGA_SERPER 0x8007 /* serial port period (u_short) */ - - /* - * Atari-specific tags - */ - -#define BI_ATARI_MCH_COOKIE 0x8000 /* _MCH cookie from TOS (u_long) */ -#define BI_ATARI_MCH_TYPE 0x8001 /* special machine type (u_long) */ - /* (values are ATARI_MACH_* defines */ - -/* mch_cookie values (upper word) */ -#define ATARI_MCH_ST 0 -#define ATARI_MCH_STE 1 -#define ATARI_MCH_TT 2 -#define ATARI_MCH_FALCON 3 - -/* mch_type values */ -#define ATARI_MACH_NORMAL 0 /* no special machine type */ -#define ATARI_MACH_MEDUSA 1 /* Medusa 040 */ -#define ATARI_MACH_HADES 2 /* Hades 040 or 060 */ -#define ATARI_MACH_AB40 3 /* Afterburner040 on Falcon */ - - /* - * VME-specific tags - */ - -#define BI_VME_TYPE 0x8000 /* VME sub-architecture (u_long) */ -#define BI_VME_BRDINFO 0x8001 /* VME board information (struct) */ - -/* BI_VME_TYPE codes */ -#define VME_TYPE_TP34V 0x0034 /* Tadpole TP34V */ -#define VME_TYPE_MVME147 0x0147 /* Motorola MVME147 */ -#define VME_TYPE_MVME162 0x0162 /* Motorola MVME162 */ -#define VME_TYPE_MVME166 0x0166 /* Motorola MVME166 */ -#define VME_TYPE_MVME167 0x0167 /* Motorola MVME167 */ -#define VME_TYPE_MVME172 0x0172 /* Motorola MVME172 */ -#define VME_TYPE_MVME177 0x0177 /* Motorola MVME177 */ -#define VME_TYPE_BVME4000 0x4000 /* BVM Ltd. BVME4000 */ -#define VME_TYPE_BVME6000 0x6000 /* BVM Ltd. BVME6000 */ - -/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on - * Motorola VME boards. Contains board number, Bug version, board - * configuration options, etc. See include/asm/mvme16xhw.h for details. - */ - - - /* - * Macintosh-specific tags (all u_long) - */ - -#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */ -#define BI_MAC_VADDR 0x8001 /* Mac video base address */ -#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */ -#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */ -#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */ -#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */ -#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */ -#define BI_MAC_BTIME 0x8007 /* Mac boot time */ -#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */ -#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */ -#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */ -#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */ - - /* - * Macintosh hardware profile data - unused, see macintosh.h for - * resonable type values - */ - -#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ -#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */ -#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */ -#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */ -#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */ -#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */ -#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */ -#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */ -#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */ -#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */ -#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */ -#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */ -#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */ -#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */ -#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */ -#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */ -#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */ -#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */ - - /* - * Mac: compatibility with old booter data format (temporarily) - * Fields unused with the new bootinfo can be deleted now; instead of - * adding new fields the struct might be splitted into a hardware address - * part and a hardware type part - */ - -#ifndef __ASSEMBLY__ - -struct mac_booter_data -{ - unsigned long videoaddr; - unsigned long videorow; - unsigned long videodepth; - unsigned long dimensions; - unsigned long args; - unsigned long boottime; - unsigned long gmtbias; - unsigned long bootver; - unsigned long videological; - unsigned long sccbase; - unsigned long id; - unsigned long memsize; - unsigned long serialmf; - unsigned long serialhsk; - unsigned long serialgpi; - unsigned long printmf; - unsigned long printhsk; - unsigned long printgpi; - unsigned long cpuid; - unsigned long rombase; - unsigned long adbdelay; - unsigned long timedbra; -}; - -extern struct mac_booter_data - mac_bi_data; - -#endif - - /* - * Apollo-specific tags - */ - -#define BI_APOLLO_MODEL 0x8000 /* model (u_long) */ - - /* - * HP300-specific tags - */ - -#define BI_HP300_MODEL 0x8000 /* model (u_long) */ -#define BI_HP300_UART_SCODE 0x8001 /* UART select code (u_long) */ -#define BI_HP300_UART_ADDR 0x8002 /* phys. addr of UART (u_long) */ - - /* - * Stuff for bootinfo interface versioning - * - * At the start of kernel code, a 'struct bootversion' is located. - * bootstrap checks for a matching version of the interface before booting - * a kernel, to avoid user confusion if kernel and bootstrap don't work - * together :-) - * - * If incompatible changes are made to the bootinfo interface, the major - * number below should be stepped (and the minor reset to 0) for the - * appropriate machine. If a change is backward-compatible, the minor - * should be stepped. "Backwards-compatible" means that booting will work, - * but certain features may not. - */ - -#define BOOTINFOV_MAGIC 0x4249561A /* 'BIV^Z' */ -#define MK_BI_VERSION(major,minor) (((major)<<16)+(minor)) -#define BI_VERSION_MAJOR(v) (((v) >> 16) & 0xffff) -#define BI_VERSION_MINOR(v) ((v) & 0xffff) - -#ifndef __ASSEMBLY__ - -struct bootversion { - unsigned short branch; - unsigned long magic; - struct { - unsigned long machtype; - unsigned long version; - } machversions[0]; -}; - -#endif /* __ASSEMBLY__ */ - -#define AMIGA_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define ATARI_BOOTI_VERSION MK_BI_VERSION( 2, 1 ) -#define MAC_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define MVME147_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define MVME16x_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define Q40_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define HP300_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) - -#ifdef BOOTINFO_COMPAT_1_0 - - /* - * Backwards compatibility with bootinfo interface version 1.0 - */ - -#define COMPAT_AMIGA_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) -#define COMPAT_ATARI_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) -#define COMPAT_MAC_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) - -#include - -#define COMPAT_NUM_AUTO 16 - -struct compat_bi_Amiga { - int model; - int num_autocon; - struct ConfigDev autocon[COMPAT_NUM_AUTO]; - unsigned long chip_size; - unsigned char vblank; - unsigned char psfreq; - unsigned long eclock; - unsigned long chipset; - unsigned long hw_present; -}; - -struct compat_bi_Atari { - unsigned long hw_present; - unsigned long mch_cookie; -}; - -#ifndef __ASSEMBLY__ - -struct compat_bi_Macintosh -{ - unsigned long videoaddr; - unsigned long videorow; - unsigned long videodepth; - unsigned long dimensions; - unsigned long args; - unsigned long boottime; - unsigned long gmtbias; - unsigned long bootver; - unsigned long videological; - unsigned long sccbase; - unsigned long id; - unsigned long memsize; - unsigned long serialmf; - unsigned long serialhsk; - unsigned long serialgpi; - unsigned long printmf; - unsigned long printhsk; - unsigned long printgpi; - unsigned long cpuid; - unsigned long rombase; - unsigned long adbdelay; - unsigned long timedbra; -}; - -#endif - -struct compat_mem_info { - unsigned long addr; - unsigned long size; -}; - -#define COMPAT_NUM_MEMINFO 4 - -#define COMPAT_CPUB_68020 0 -#define COMPAT_CPUB_68030 1 -#define COMPAT_CPUB_68040 2 -#define COMPAT_CPUB_68060 3 -#define COMPAT_FPUB_68881 5 -#define COMPAT_FPUB_68882 6 -#define COMPAT_FPUB_68040 7 -#define COMPAT_FPUB_68060 8 - -#define COMPAT_CPU_68020 (1< - -#endif diff --git a/include/asm-m68k/bugs.h b/include/asm-m68k/bugs.h deleted file mode 100644 index d019355..0000000 --- a/include/asm-m68k/bugs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-m68k/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -extern void check_bugs(void); /* in arch/m68k/kernel/setup.c */ diff --git a/include/asm-m68k/bvme6000hw.h b/include/asm-m68k/bvme6000hw.h deleted file mode 100644 index f40d2f8..0000000 --- a/include/asm-m68k/bvme6000hw.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _M68K_BVME6000HW_H_ -#define _M68K_BVME6000HW_H_ - -#include - -/* - * PIT structure - */ - -#define BVME_PIT_BASE 0xffa00000 - -typedef struct { - unsigned char - pad_a[3], pgcr, - pad_b[3], psrr, - pad_c[3], paddr, - pad_d[3], pbddr, - pad_e[3], pcddr, - pad_f[3], pivr, - pad_g[3], pacr, - pad_h[3], pbcr, - pad_i[3], padr, - pad_j[3], pbdr, - pad_k[3], paar, - pad_l[3], pbar, - pad_m[3], pcdr, - pad_n[3], psr, - pad_o[3], res1, - pad_p[3], res2, - pad_q[3], tcr, - pad_r[3], tivr, - pad_s[3], res3, - pad_t[3], cprh, - pad_u[3], cprm, - pad_v[3], cprl, - pad_w[3], res4, - pad_x[3], crh, - pad_y[3], crm, - pad_z[3], crl, - pad_A[3], tsr, - pad_B[3], res5; -} PitRegs_t, *PitRegsPtr; - -#define bvmepit ((*(volatile PitRegsPtr)(BVME_PIT_BASE))) - -#define BVME_RTC_BASE 0xff900000 - -typedef struct { - unsigned char - pad_a[3], msr, - pad_b[3], t0cr_rtmr, - pad_c[3], t1cr_omr, - pad_d[3], pfr_icr0, - pad_e[3], irr_icr1, - pad_f[3], bcd_tenms, - pad_g[3], bcd_sec, - pad_h[3], bcd_min, - pad_i[3], bcd_hr, - pad_j[3], bcd_dom, - pad_k[3], bcd_mth, - pad_l[3], bcd_year, - pad_m[3], bcd_ujcc, - pad_n[3], bcd_hjcc, - pad_o[3], bcd_dow, - pad_p[3], t0lsb, - pad_q[3], t0msb, - pad_r[3], t1lsb, - pad_s[3], t1msb, - pad_t[3], cmp_sec, - pad_u[3], cmp_min, - pad_v[3], cmp_hr, - pad_w[3], cmp_dom, - pad_x[3], cmp_mth, - pad_y[3], cmp_dow, - pad_z[3], sav_sec, - pad_A[3], sav_min, - pad_B[3], sav_hr, - pad_C[3], sav_dom, - pad_D[3], sav_mth, - pad_E[3], ram, - pad_F[3], test; -} RtcRegs_t, *RtcPtr_t; - - -#define BVME_I596_BASE 0xff100000 - -#define BVME_ETHIRQ_REG 0xff20000b - -#define BVME_LOCAL_IRQ_STAT 0xff20000f - -#define BVME_ETHERR 0x02 -#define BVME_ABORT_STATUS 0x08 - -#define BVME_NCR53C710_BASE 0xff000000 - -#define BVME_SCC_A_ADDR 0xffb0000b -#define BVME_SCC_B_ADDR 0xffb00003 -#define BVME_SCC_RTxC 7372800 - -#define BVME_CONFIG_REG 0xff500003 - -#define config_reg_ptr (volatile unsigned char *)BVME_CONFIG_REG - -#define BVME_CONFIG_SW1 0x08 -#define BVME_CONFIG_SW2 0x04 -#define BVME_CONFIG_SW3 0x02 -#define BVME_CONFIG_SW4 0x01 - - -#define BVME_IRQ_TYPE_PRIO 0 - -#define BVME_IRQ_PRN (IRQ_USER+20) -#define BVME_IRQ_TIMER (IRQ_USER+25) -#define BVME_IRQ_I596 IRQ_AUTO_2 -#define BVME_IRQ_SCSI IRQ_AUTO_3 -#define BVME_IRQ_RTC IRQ_AUTO_6 -#define BVME_IRQ_ABORT IRQ_AUTO_7 - -/* SCC interrupts */ -#define BVME_IRQ_SCC_BASE IRQ_USER -#define BVME_IRQ_SCCB_TX IRQ_USER -#define BVME_IRQ_SCCB_STAT (IRQ_USER+2) -#define BVME_IRQ_SCCB_RX (IRQ_USER+4) -#define BVME_IRQ_SCCB_SPCOND (IRQ_USER+6) -#define BVME_IRQ_SCCA_TX (IRQ_USER+8) -#define BVME_IRQ_SCCA_STAT (IRQ_USER+10) -#define BVME_IRQ_SCCA_RX (IRQ_USER+12) -#define BVME_IRQ_SCCA_SPCOND (IRQ_USER+14) - -/* Address control registers */ - -#define BVME_ACR_A32VBA 0xff400003 -#define BVME_ACR_A32MSK 0xff410003 -#define BVME_ACR_A24VBA 0xff420003 -#define BVME_ACR_A24MSK 0xff430003 -#define BVME_ACR_A16VBA 0xff440003 -#define BVME_ACR_A32LBA 0xff450003 -#define BVME_ACR_A24LBA 0xff460003 -#define BVME_ACR_ADDRCTL 0xff470003 - -#define bvme_acr_a32vba *(volatile unsigned char *)BVME_ACR_A32VBA -#define bvme_acr_a32msk *(volatile unsigned char *)BVME_ACR_A32MSK -#define bvme_acr_a24vba *(volatile unsigned char *)BVME_ACR_A24VBA -#define bvme_acr_a24msk *(volatile unsigned char *)BVME_ACR_A24MSK -#define bvme_acr_a16vba *(volatile unsigned char *)BVME_ACR_A16VBA -#define bvme_acr_a32lba *(volatile unsigned char *)BVME_ACR_A32LBA -#define bvme_acr_a24lba *(volatile unsigned char *)BVME_ACR_A24LBA -#define bvme_acr_addrctl *(volatile unsigned char *)BVME_ACR_ADDRCTL - -#endif diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h deleted file mode 100644 index 3008665..0000000 --- a/include/asm-m68k/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68K_BYTEORDER_H -#define _M68K_BYTEORDER_H - -#include -#include - -#endif /* _M68K_BYTEORDER_H */ diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h deleted file mode 100644 index fed3fd3..0000000 --- a/include/asm-m68k/cache.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-m68k/cache.h - */ -#ifndef __ARCH_M68K_CACHE_H -#define __ARCH_M68K_CACHE_H - -/* bytes per L1 cache line */ -#define L1_CACHE_SHIFT 4 -#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT) - -#endif diff --git a/include/asm-m68k/cachectl.h b/include/asm-m68k/cachectl.h deleted file mode 100644 index 525978e..0000000 --- a/include/asm-m68k/cachectl.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _M68K_CACHECTL_H -#define _M68K_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ -#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ -#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ - -#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ -#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ -#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ - -#endif /* _M68K_CACHECTL_H */ diff --git a/include/asm-m68k/cacheflush.h b/include/asm-m68k/cacheflush.h deleted file mode 100644 index 16bf375..0000000 --- a/include/asm-m68k/cacheflush.h +++ /dev/null @@ -1,156 +0,0 @@ -#ifndef _M68K_CACHEFLUSH_H -#define _M68K_CACHEFLUSH_H - -#include - -/* cache code */ -#define FLUSH_I_AND_D (0x00000808) -#define FLUSH_I (0x00000008) - -/* - * Cache handling functions - */ - -static inline void flush_icache(void) -{ - if (CPU_IS_040_OR_060) - asm volatile ( "nop\n" - " .chip 68040\n" - " cpusha %bc\n" - " .chip 68k"); - else { - unsigned long tmp; - asm volatile ( "movec %%cacr,%0\n" - " or.w %1,%0\n" - " movec %0,%%cacr" - : "=&d" (tmp) - : "id" (FLUSH_I)); - } -} - -/* - * invalidate the cache for the specified memory range. - * It starts at the physical address specified for - * the given number of bytes. - */ -extern void cache_clear(unsigned long paddr, int len); -/* - * push any dirty cache in the specified memory range. - * It starts at the physical address specified for - * the given number of bytes. - */ -extern void cache_push(unsigned long paddr, int len); - -/* - * push and invalidate pages in the specified user virtual - * memory range. - */ -extern void cache_push_v(unsigned long vaddr, int len); - -/* This is needed whenever the virtual mapping of the current - process changes. */ -#define __flush_cache_all() \ -({ \ - if (CPU_IS_040_OR_060) \ - __asm__ __volatile__("nop\n\t" \ - ".chip 68040\n\t" \ - "cpusha %dc\n\t" \ - ".chip 68k"); \ - else { \ - unsigned long _tmp; \ - __asm__ __volatile__("movec %%cacr,%0\n\t" \ - "orw %1,%0\n\t" \ - "movec %0,%%cacr" \ - : "=&d" (_tmp) \ - : "di" (FLUSH_I_AND_D)); \ - } \ -}) - -#define __flush_cache_030() \ -({ \ - if (CPU_IS_020_OR_030) { \ - unsigned long _tmp; \ - __asm__ __volatile__("movec %%cacr,%0\n\t" \ - "orw %1,%0\n\t" \ - "movec %0,%%cacr" \ - : "=&d" (_tmp) \ - : "di" (FLUSH_I_AND_D)); \ - } \ -}) - -#define flush_cache_all() __flush_cache_all() - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -static inline void flush_cache_mm(struct mm_struct *mm) -{ - if (mm == current->mm) - __flush_cache_030(); -} - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -/* flush_cache_range/flush_cache_page must be macros to avoid - a dependency on linux/mm.h, which includes this file... */ -static inline void flush_cache_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end) -{ - if (vma->vm_mm == current->mm) - __flush_cache_030(); -} - -static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn) -{ - if (vma->vm_mm == current->mm) - __flush_cache_030(); -} - - -/* Push the page at kernel virtual address and clear the icache */ -/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ -static inline void __flush_page_to_ram(void *vaddr) -{ - if (CPU_IS_040_OR_060) { - __asm__ __volatile__("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (__pa(vaddr))); - } else { - unsigned long _tmp; - __asm__ __volatile__("movec %%cacr,%0\n\t" - "orw %1,%0\n\t" - "movec %0,%%cacr" - : "=&d" (_tmp) - : "di" (FLUSH_I)); - } -} - -#define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) - -extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long addr, int len); -extern void flush_icache_range(unsigned long address, unsigned long endaddr); - -static inline void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, void *src, int len) -{ - flush_cache_page(vma, vaddr, page_to_pfn(page)); - memcpy(dst, src, len); - flush_icache_user_range(vma, page, vaddr, len); -} -static inline void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, void *src, int len) -{ - flush_cache_page(vma, vaddr, page_to_pfn(page)); - memcpy(dst, src, len); -} - -#endif /* _M68K_CACHEFLUSH_H */ diff --git a/include/asm-m68k/checksum.h b/include/asm-m68k/checksum.h deleted file mode 100644 index 494f9ae..0000000 --- a/include/asm-m68k/checksum.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, - int len, __wsum sum, - int *csum_err); - -extern __wsum csum_partial_copy_nocheck(const void *src, - void *dst, int len, - __wsum sum); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum = 0; - unsigned long tmp; - - __asm__ ("subqw #1,%2\n" - "1:\t" - "movel %1@+,%3\n\t" - "addxl %3,%0\n\t" - "dbra %2,1b\n\t" - "movel %0,%3\n\t" - "swap %3\n\t" - "addxw %3,%0\n\t" - "clrw %3\n\t" - "addxw %3,%0\n\t" - : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) - : "0" (sum), "1" (iph), "2" (ihl) - : "memory"); - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (tmp)); - return (__force __sum16)~sum; -} - - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %2,%0\n\t" - "addxl %3,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=d" (saddr) - : "g" (daddr), "1" (saddr), "d" (len + proto), - "0" (sum)); - return sum; -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h deleted file mode 100644 index d1ea750..0000000 --- a/include/asm-m68k/contregs.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _M68K_CONTREGS_H -#define _M68K_CONTREGS_H - -/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address - * space. These are for the mmu's context register, etc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* 3=sun3 - 4=sun4 (as in sun4 sysmaint student book) - c=sun4c (according to davem) */ - -#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ -#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ -#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ -#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ -#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ -#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ -#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ -#define AC_SYNC_ERR 0x60000000 /* c fault type */ -#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ -#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ -#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ -#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ -#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ -#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ -#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ -#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ -#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ - -/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ -#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ -#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ -#define AC_M_CXR 0x0200 /* shv Context Register */ -#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ -#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ -#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ -#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ -#define AC_M_RESET 0x0700 /* hv Reset Reg */ -#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ -#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ -#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ -#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ -#define AC_M_ITR 0x1300 /* hv Index Tag Register */ -#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ -#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ -#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ -#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ -#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ -#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ - -#endif /* _M68K_CONTREGS_H */ diff --git a/include/asm-m68k/cputime.h b/include/asm-m68k/cputime.h deleted file mode 100644 index c79c5e8..0000000 --- a/include/asm-m68k/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include - -#endif /* __M68K_CPUTIME_H */ diff --git a/include/asm-m68k/current.h b/include/asm-m68k/current.h deleted file mode 100644 index 8de8f8c..0000000 --- a/include/asm-m68k/current.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_CURRENT_H -#define _M68K_CURRENT_H - -register struct task_struct *current __asm__("%a2"); - -#endif /* !(_M68K_CURRENT_H) */ diff --git a/include/asm-m68k/delay.h b/include/asm-m68k/delay.h deleted file mode 100644 index 5ed9285..0000000 --- a/include/asm-m68k/delay.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _M68K_DELAY_H -#define _M68K_DELAY_H - -#include - -/* - * Copyright (C) 1994 Hamish Macdonald - * - * Delay routines, using a pre-computed "loops_per_jiffy" value. - */ - -static inline void __delay(unsigned long loops) -{ - __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" - : "=d" (loops) : "0" (loops)); -} - -extern void __bad_udelay(void); - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -static inline void __const_udelay(unsigned long xloops) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1" - : "=d" (xloops), "=d" (tmp) - : "d" (xloops), "1" (loops_per_jiffy)); - __delay(xloops * HZ); -} - -static inline void __udelay(unsigned long usecs) -{ - __const_udelay(usecs * 4295); /* 2**32 / 1000000 */ -} - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \ - __udelay(n)) - -static inline unsigned long muldiv(unsigned long a, unsigned long b, - unsigned long c) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" - : "=d" (tmp), "=d" (a) - : "d" (b), "d" (c), "1" (a)); - return a; -} - -#endif /* defined(_M68K_DELAY_H) */ diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h deleted file mode 100644 index d8f9872..0000000 --- a/include/asm-m68k/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h deleted file mode 100644 index 8243c93..0000000 --- a/include/asm-m68k/div64.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _M68K_DIV64_H -#define _M68K_DIV64_H - -#include - -/* n = n / base; return rem; */ - -#define do_div(n, base) ({ \ - union { \ - unsigned long n32[2]; \ - unsigned long long n64; \ - } __n; \ - unsigned long __rem, __upper; \ - \ - __n.n64 = (n); \ - if ((__upper = __n.n32[0])) { \ - asm ("divul.l %2,%1:%0" \ - : "=d" (__n.n32[0]), "=d" (__upper) \ - : "d" (base), "0" (__n.n32[0])); \ - } \ - asm ("divu.l %2,%1:%0" \ - : "=d" (__n.n32[1]), "=d" (__rem) \ - : "d" (base), "1" (__upper), "0" (__n.n32[1])); \ - (n) = __n.n64; \ - __rem; \ -}) - -#endif /* _M68K_DIV64_H */ diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h deleted file mode 100644 index 26f5054..0000000 --- a/include/asm-m68k/dma-mapping.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef _M68K_DMA_MAPPING_H -#define _M68K_DMA_MAPPING_H - -#include - -struct scatterlist; - -#ifndef CONFIG_MMU_SUN3 -static inline int dma_supported(struct device *dev, u64 mask) -{ - return 1; -} - -static inline int dma_set_mask(struct device *dev, u64 mask) -{ - return 0; -} - -static inline int dma_get_cache_alignment(void) -{ - return 1 << L1_CACHE_SHIFT; -} - -static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -extern void *dma_alloc_coherent(struct device *, size_t, - dma_addr_t *, gfp_t); -extern void dma_free_coherent(struct device *, size_t, - void *, dma_addr_t); - -static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) -{ - return dma_alloc_coherent(dev, size, handle, flag); -} -static inline void dma_free_noncoherent(struct device *dev, size_t size, - void *addr, dma_addr_t handle) -{ - dma_free_coherent(dev, size, addr, handle); -} -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - /* we use coherent allocation, so not much to do here. */ -} - -extern dma_addr_t dma_map_single(struct device *, void *, size_t, - enum dma_data_direction); -static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ -} - -extern dma_addr_t dma_map_page(struct device *, struct page *, - unsigned long, size_t size, - enum dma_data_direction); -static inline void dma_unmap_page(struct device *dev, dma_addr_t address, - size_t size, enum dma_data_direction dir) -{ -} - -extern int dma_map_sg(struct device *, struct scatterlist *, int, - enum dma_data_direction); -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction dir) -{ -} - -extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t, - enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, - enum dma_data_direction); - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_device(dev, dma_handle, offset + size, direction); -} - -static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir) -{ -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t handle) -{ - return 0; -} - -#else -#include -#endif - -#endif /* _M68K_DMA_MAPPING_H */ diff --git a/include/asm-m68k/dma.h b/include/asm-m68k/dma.h deleted file mode 100644 index 4240fbc..0000000 --- a/include/asm-m68k/dma.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - - -/* it's useless on the m68k, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -#define MAX_DMA_CHANNELS 8 - -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#define isa_dma_bridge_buggy (0) - -#endif /* _M68K_DMA_H */ diff --git a/include/asm-m68k/dsp56k.h b/include/asm-m68k/dsp56k.h deleted file mode 100644 index 2d8c0c9..0000000 --- a/include/asm-m68k/dsp56k.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-m68k/dsp56k.h - defines and declarations for - * DSP56k device driver - * - * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - - -/* Used for uploading DSP binary code */ -struct dsp56k_upload { - int len; - char __user *bin; -}; - -/* For the DSP host flags */ -struct dsp56k_host_flags { - int dir; /* Bit field. 1 = write output bit, 0 = do nothing. - * 0x0000 means reading only, 0x0011 means - * writing the bits stored in `out' on HF0 and HF1. - * Note that HF2 and HF3 can only be read. - */ - int out; /* Bit field like above. */ - int status; /* Host register's current state is returned */ -}; - -/* ioctl command codes */ -#define DSP56K_UPLOAD 1 /* Upload DSP binary program */ -#define DSP56K_SET_TX_WSIZE 2 /* Host transmit word size (1-4) */ -#define DSP56K_SET_RX_WSIZE 3 /* Host receive word size (1-4) */ -#define DSP56K_HOST_FLAGS 4 /* Host flag registers */ -#define DSP56K_HOST_CMD 5 /* Trig Host Command (0-31) */ diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h deleted file mode 100644 index 890bbf7..0000000 --- a/include/asm-m68k/dvma.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * include/asm-m68k/dma.h - * - * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu) - * - * Hacked to fit Sun3x needs by Thomas Bogendoerfer - */ - -#ifndef __M68K_DVMA_H -#define __M68K_DVMA_H - - -#define DVMA_PAGE_SHIFT 13 -#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT) -#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1)) -#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE) - -extern void dvma_init(void); -extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr, - int len); - -#define dvma_malloc(x) dvma_malloc_align(x, 0) -#define dvma_map(x, y) dvma_map_align(x, y, 0) -#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff) -#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff) -extern unsigned long dvma_map_align(unsigned long kaddr, int len, - int align); -extern void *dvma_malloc_align(unsigned long len, unsigned long align); - -extern void dvma_unmap(void *baddr); -extern void dvma_free(void *vaddr); - - -#ifdef CONFIG_SUN3 -/* sun3 dvma page support */ - -/* memory and pmegs potentially reserved for dvma */ -#define DVMA_PMEG_START 10 -#define DVMA_PMEG_END 16 -#define DVMA_START 0xf00000 -#define DVMA_END 0xfe0000 -#define DVMA_SIZE (DVMA_END-DVMA_START) -#define IOMMU_TOTAL_ENTRIES 128 -#define IOMMU_ENTRIES 120 - -/* empirical kludge -- dvma regions only seem to work right on 0x10000 - byte boundaries */ -#define DVMA_REGION_SIZE 0x10000 -#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \ - ~(DVMA_REGION_SIZE-1)) - -/* virt <-> phys conversions */ -#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff) -#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000) -#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff) -#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000) -#define dvma_vtob(x) dvma_vtop(x) -#define dvma_btov(x) dvma_ptov(x) - -static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, - int len) -{ - return 0; -} - -#else /* Sun3x */ - -/* sun3x dvma page support */ - -#define DVMA_START 0x0 -#define DVMA_END 0xf00000 -#define DVMA_SIZE (DVMA_END-DVMA_START) -#define IOMMU_TOTAL_ENTRIES 2048 -/* the prom takes the top meg */ -#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80) - -#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff) -#define dvma_btov(x) ((unsigned long)(x) | 0xff000000) - -extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len); - - - -/* everything below this line is specific to dma used for the onboard - ESP scsi on sun3x */ - -/* Structure to describe the current status of DMA registers on the Sparc */ -struct sparc_dma_registers { - __volatile__ unsigned long cond_reg; /* DMA condition register */ - __volatile__ unsigned long st_addr; /* Start address of this transfer */ - __volatile__ unsigned long cnt; /* How many bytes to transfer */ - __volatile__ unsigned long dma_test; /* DMA test register */ -}; - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct Linux_SBus_DMA { - struct Linux_SBus_DMA *next; - struct linux_sbus_device *SBus_dev; - struct sparc_dma_registers *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - unsigned long addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct Linux_SBus_DMA *dma_chain; - -/* Broken hardware... */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) -#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) -#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) -#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) -#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) -#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) -#define DMA_BEGINDMA_W(regs) \ - ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) -#define DMA_BEGINDMA_R(regs) \ - ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -/* Reset the friggin' thing... */ -#define DMA_RESET(dma) do { \ - struct sparc_dma_registers *regs = dma->regs; \ - /* Let the current FIFO drain itself */ \ - sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ - /* Reset the logic */ \ - regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ - __delay(400); /* let the bits set ;) */ \ - regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ - sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ - /* Enable FAST transfers if available */ \ - if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ - dma->running = 0; \ -} while(0) - - -#endif /* !CONFIG_SUN3 */ - -#endif /* !(__M68K_DVMA_H) */ diff --git a/include/asm-m68k/elf.h b/include/asm-m68k/elf.h deleted file mode 100644 index 0b0f49e..0000000 --- a/include/asm-m68k/elf.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ASMm68k_ELF_H -#define __ASMm68k_ELF_H - -/* - * ELF register definitions.. - */ - -#include -#include - -/* - * 68k ELF relocation types - */ -#define R_68K_NONE 0 -#define R_68K_32 1 -#define R_68K_16 2 -#define R_68K_8 3 -#define R_68K_PC32 4 -#define R_68K_PC16 5 -#define R_68K_PC8 6 -#define R_68K_GOT32 7 -#define R_68K_GOT16 8 -#define R_68K_GOT8 9 -#define R_68K_GOT32O 10 -#define R_68K_GOT16O 11 -#define R_68K_GOT8O 12 -#define R_68K_PLT32 13 -#define R_68K_PLT16 14 -#define R_68K_PLT8 15 -#define R_68K_PLT32O 16 -#define R_68K_PLT16O 17 -#define R_68K_PLT8O 18 -#define R_68K_COPY 19 -#define R_68K_GLOB_DAT 20 -#define R_68K_JMP_SLOT 21 -#define R_68K_RELATIVE 22 - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_m68kfp_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_68K) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_68K - -/* For SVR4/m68k the function pointer to be registered with `atexit' is - passed in %a1. Although my copy of the ABI has no such statement, it - is actually used on ASV. */ -#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - -#define USE_ELF_CORE_DUMP -#ifndef CONFIG_SUN3 -#define ELF_EXEC_PAGESIZE 4096 -#else -#define ELF_EXEC_PAGESIZE 8192 -#endif - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#ifndef CONFIG_SUN3 -#define ELF_ET_DYN_BASE 0xD0000000UL -#else -#define ELF_ET_DYN_BASE 0x0D800000UL -#endif - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - /* Bleech. */ \ - pr_reg[0] = regs->d1; \ - pr_reg[1] = regs->d2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d4; \ - pr_reg[4] = regs->d5; \ - pr_reg[7] = regs->a0; \ - pr_reg[8] = regs->a1; \ - pr_reg[9] = regs->a2; \ - pr_reg[14] = regs->d0; \ - pr_reg[15] = rdusp(); \ - pr_reg[16] = regs->orig_d0; \ - pr_reg[17] = regs->sr; \ - pr_reg[18] = regs->pc; \ - pr_reg[19] = (regs->format << 12) | regs->vector; \ - { \ - struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ - pr_reg[5] = sw->d6; \ - pr_reg[6] = sw->d7; \ - pr_reg[10] = sw->a3; \ - pr_reg[11] = sw->a4; \ - pr_reg[12] = sw->a5; \ - pr_reg[13] = sw->a6; \ - } - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/include/asm-m68k/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-m68k/entry.h b/include/asm-m68k/entry.h deleted file mode 100644 index 5202f5a..0000000 --- a/include/asm-m68k/entry.h +++ /dev/null @@ -1,137 +0,0 @@ -#ifndef __M68K_ENTRY_H -#define __M68K_ENTRY_H - -#include -#include - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - sr - * 2E(sp) - pc - * 32(sp) - format & vector - */ - -/* - * 97/05/14 Andreas: Register %a2 is now set to the current task throughout - * the whole kernel. - */ - -/* the following macro is used when enabling interrupts */ -#if defined(MACH_ATARI_ONLY) - /* block out HSYNC on the atari */ -#define ALLOWINT (~0x400) -#define MAX_NOINT_IPL 3 -#else - /* portable version */ -#define ALLOWINT (~0x700) -#define MAX_NOINT_IPL 0 -#endif /* machine compilation types */ - -#ifdef __ASSEMBLY__ - -#define curptr a2 - -LFLUSH_I_AND_D = 0x00000808 -LSIGTRAP = 5 - -/* process bits for task_struct.ptrace */ -PT_TRACESYS_OFF = 3 -PT_TRACESYS_BIT = 1 -PT_PTRACED_OFF = 3 -PT_PTRACED_BIT = 0 -PT_DTRACE_OFF = 3 -PT_DTRACE_BIT = 2 - -#define SAVE_ALL_INT save_all_int -#define SAVE_ALL_SYS save_all_sys -#define RESTORE_ALL restore_all -/* - * This defines the normal kernel pt-regs layout. - * - * regs a3-a6 and d6-d7 are preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -/* - * a -1 in the orig_d0 field signifies - * that the stack frame is NOT for syscall - */ -.macro save_all_int - clrl %sp@- | stk_adj - pea -1:w | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro save_all_sys - clrl %sp@- | stk_adj - movel %d0,%sp@- | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro restore_all - moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp | orig d0 - addl %sp@+,%sp | stk adj - rte -.endm - -#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ - -#define SAVE_SWITCH_STACK save_switch_stack -#define RESTORE_SWITCH_STACK restore_switch_stack -#define GET_CURRENT(tmp) get_current tmp - -.macro save_switch_stack - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro restore_switch_stack - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -.macro get_current reg=%d0 - movel %sp,\reg - andw #-THREAD_SIZE,\reg - movel \reg,%curptr - movel %curptr@,%curptr -.endm - -#else /* C source */ - -#define STR(X) STR1(X) -#define STR1(X) #X - -#define PT_OFF_ORIG_D0 0x24 -#define PT_OFF_FORMATVEC 0x32 -#define PT_OFF_SR 0x2C -#define SAVE_ALL_INT \ - "clrl %%sp@-;" /* stk_adj */ \ - "pea -1:w;" /* orig d0 = -1 */ \ - "movel %%d0,%%sp@-;" /* d0 */ \ - "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" -#define GET_CURRENT(tmp) \ - "movel %%sp,"#tmp"\n\t" \ - "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ - "movel "#tmp",%%a2\n\t" \ - "movel %%a2@,%%a2" - -#endif - -#endif /* __M68K_ENTRY_H */ diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h deleted file mode 100644 index 0d4e188..0000000 --- a/include/asm-m68k/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include - -#endif /* _M68K_ERRNO_H */ diff --git a/include/asm-m68k/fb.h b/include/asm-m68k/fb.h deleted file mode 100644 index 380b97a..0000000 --- a/include/asm-m68k/fb.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include -#include - -#ifdef CONFIG_SUN3 -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE; -} -#else -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - if (CPU_IS_020_OR_030) - pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030; - if (CPU_IS_040_OR_060) { - pgprot_val(vma->vm_page_prot) &= _CACHEMASK040; - /* Use no-cache mode, serialized */ - pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S; - } -} -#endif /* CONFIG_SUN3 */ - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h deleted file mode 100644 index b9215a0..0000000 --- a/include/asm-m68k/fbio.h +++ /dev/null @@ -1,330 +0,0 @@ -#ifndef __LINUX_FBIO_H -#define __LINUX_FBIO_H - -#include -#include - -/* Constants used for fbio SunOS compatibility */ -/* (C) 1996 Miguel de Icaza */ - -/* Frame buffer types */ -#define FBTYPE_NOTYPE -1 -#define FBTYPE_SUN1BW 0 /* mono */ -#define FBTYPE_SUN1COLOR 1 -#define FBTYPE_SUN2BW 2 -#define FBTYPE_SUN2COLOR 3 -#define FBTYPE_SUN2GP 4 -#define FBTYPE_SUN5COLOR 5 -#define FBTYPE_SUN3COLOR 6 -#define FBTYPE_MEMCOLOR 7 -#define FBTYPE_SUN4COLOR 8 - -#define FBTYPE_NOTSUN1 9 -#define FBTYPE_NOTSUN2 10 -#define FBTYPE_NOTSUN3 11 - -#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ -#define FBTYPE_SUNROP_COLOR 13 -#define FBTYPE_SUNFB_VIDEO 14 -#define FBTYPE_SUNGIFB 15 -#define FBTYPE_SUNGPLAS 16 -#define FBTYPE_SUNGP3 17 -#define FBTYPE_SUNGT 18 -#define FBTYPE_SUNLEO 19 /* zx Leo card */ -#define FBTYPE_MDICOLOR 20 /* cg14 */ -#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ - -#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ - -/* Does not seem to be listed in the Sun file either */ -#define FBTYPE_CREATOR 22 -#define FBTYPE_PCI_IGA1682 23 -#define FBTYPE_P9100COLOR 24 - -#define FBTYPE_PCI_GENERIC 1000 -#define FBTYPE_PCI_MACH64 1001 - -/* fbio ioctls */ -/* Returned by FBIOGTYPE */ -struct fbtype { - int fb_type; /* fb type, see above */ - int fb_height; /* pixels */ - int fb_width; /* pixels */ - int fb_depth; - int fb_cmsize; /* color map entries */ - int fb_size; /* fb size in bytes */ -}; -#define FBIOGTYPE _IOR('F', 0, struct fbtype) - -struct fbcmap { - int index; /* first element (0 origin) */ - int count; - unsigned char __user *red; - unsigned char __user *green; - unsigned char __user *blue; -}; - -#ifdef __KERNEL__ -#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) -#else -#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) -#endif - -/* # of device specific values */ -#define FB_ATTR_NDEVSPECIFIC 8 -/* # of possible emulations */ -#define FB_ATTR_NEMUTYPES 4 - -struct fbsattr { - int flags; - int emu_type; /* -1 if none */ - int dev_specific[FB_ATTR_NDEVSPECIFIC]; -}; - -struct fbgattr { - int real_type; /* real frame buffer type */ - int owner; /* unknown */ - struct fbtype fbtype; /* real frame buffer fbtype */ - struct fbsattr sattr; - int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ -}; -#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ -#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ - -#define FBIOSVIDEO _IOW('F', 7, int) -#define FBIOGVIDEO _IOR('F', 8, int) - -struct fbcursor { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - char __user *image; /* cursor image bits */ - char __user *mask; /* cursor mask bits */ -}; - -/* set/get cursor attributes/shape */ -#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) -#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) - -/* set/get cursor position */ -#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) -#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) - -/* get max cursor size */ -#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) - -/* wid manipulation */ -struct fb_wid_alloc { -#define FB_WID_SHARED_8 0 -#define FB_WID_SHARED_24 1 -#define FB_WID_DBL_8 2 -#define FB_WID_DBL_24 3 - __u32 wa_type; - __s32 wa_index; /* Set on return */ - __u32 wa_count; -}; -struct fb_wid_item { - __u32 wi_type; - __s32 wi_index; - __u32 wi_attrs; - __u32 wi_values[32]; -}; -struct fb_wid_list { - __u32 wl_flags; - __u32 wl_count; - struct fb_wid_item *wl_list; -}; - -#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) -#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) -#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) -#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) - -/* Creator ioctls */ -#define FFB_IOCTL ('F'<<8) -#define FFB_SYS_INFO (FFB_IOCTL|80) -#define FFB_CLUTREAD (FFB_IOCTL|81) -#define FFB_CLUTPOST (FFB_IOCTL|82) -#define FFB_SETDIAGMODE (FFB_IOCTL|83) -#define FFB_GETMONITORID (FFB_IOCTL|84) -#define FFB_GETVIDEOMODE (FFB_IOCTL|85) -#define FFB_SETVIDEOMODE (FFB_IOCTL|86) -#define FFB_SETSERVER (FFB_IOCTL|87) -#define FFB_SETOVCTL (FFB_IOCTL|88) -#define FFB_GETOVCTL (FFB_IOCTL|89) -#define FFB_GETSAXNUM (FFB_IOCTL|90) -#define FFB_FBDEBUG (FFB_IOCTL|91) - -/* Cg14 ioctls */ -#define MDI_IOCTL ('M'<<8) -#define MDI_RESET (MDI_IOCTL|1) -#define MDI_GET_CFGINFO (MDI_IOCTL|2) -#define MDI_SET_PIXELMODE (MDI_IOCTL|3) -# define MDI_32_PIX 32 -# define MDI_16_PIX 16 -# define MDI_8_PIX 8 - -struct mdi_cfginfo { - int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ - int mdi_type; /* FBTYPE name */ - int mdi_height; /* height */ - int mdi_width; /* widht */ - int mdi_size; /* available ram */ - int mdi_mode; /* 8bpp, 16bpp or 32bpp */ - int mdi_pixfreq; /* pixel clock (from PROM) */ -}; - -/* SparcLinux specific ioctl for the MDI, should be replaced for - * the SET_XLUT/SET_CLUTn ioctls instead - */ -#define MDI_CLEAR_XLUT (MDI_IOCTL|9) - -/* leo & ffb ioctls */ -struct fb_clut_alloc { - __u32 clutid; /* Set on return */ - __u32 flag; - __u32 index; -}; - -struct fb_clut { -#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - char * red; - char * green; - char * blue; -}; - -struct fb_clut32 { - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - __u32 red; - __u32 green; - __u32 blue; -}; - -#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) -#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) -#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) -#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) -#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ -#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ - -#ifdef __KERNEL__ -/* Addresses on the fd of a cgsix that are mappable */ -#define CG6_FBC 0x70000000 -#define CG6_TEC 0x70001000 -#define CG6_BTREGS 0x70002000 -#define CG6_FHC 0x70004000 -#define CG6_THC 0x70005000 -#define CG6_ROM 0x70006000 -#define CG6_RAM 0x70016000 -#define CG6_DHC 0x80000000 - -#define CG3_MMAP_OFFSET 0x4000000 - -/* Addresses on the fd of a tcx that are mappable */ -#define TCX_RAM8BIT 0x00000000 -#define TCX_RAM24BIT 0x01000000 -#define TCX_UNK3 0x10000000 -#define TCX_UNK4 0x20000000 -#define TCX_CONTROLPLANE 0x28000000 -#define TCX_UNK6 0x30000000 -#define TCX_UNK7 0x38000000 -#define TCX_TEC 0x70000000 -#define TCX_BTREGS 0x70002000 -#define TCX_THC 0x70004000 -#define TCX_DHC 0x70008000 -#define TCX_ALT 0x7000a000 -#define TCX_SYNC 0x7000e000 -#define TCX_UNK2 0x70010000 - -/* CG14 definitions */ - -/* Offsets into the OBIO space: */ -#define CG14_REGS 0 /* registers */ -#define CG14_CURSORREGS 0x1000 /* cursor registers */ -#define CG14_DACREGS 0x2000 /* DAC registers */ -#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ -#define CG14_CLUT1 0x4000 /* Color Look Up Table */ -#define CG14_CLUT2 0x5000 /* Color Look Up Table */ -#define CG14_CLUT3 0x6000 /* Color Look Up Table */ -#define CG14_AUTO 0xf000 - -#endif /* KERNEL */ - -/* These are exported to userland for applications to use */ -/* Mappable offsets for the cg14: control registers */ -#define MDI_DIRECT_MAP 0x10000000 -#define MDI_CTLREG_MAP 0x20000000 -#define MDI_CURSOR_MAP 0x30000000 -#define MDI_SHDW_VRT_MAP 0x40000000 - -/* Mappable offsets for the cg14: frame buffer resolutions */ -/* 32 bits */ -#define MDI_CHUNKY_XBGR_MAP 0x50000000 -#define MDI_CHUNKY_BGR_MAP 0x60000000 - -/* 16 bits */ -#define MDI_PLANAR_X16_MAP 0x70000000 -#define MDI_PLANAR_C16_MAP 0x80000000 - -/* 8 bit is done as CG3 MMAP offset */ -/* 32 bits, planar */ -#define MDI_PLANAR_X32_MAP 0x90000000 -#define MDI_PLANAR_B32_MAP 0xa0000000 -#define MDI_PLANAR_G32_MAP 0xb0000000 -#define MDI_PLANAR_R32_MAP 0xc0000000 - -/* Mappable offsets on leo */ -#define LEO_SS0_MAP 0x00000000 -#define LEO_LC_SS0_USR_MAP 0x00800000 -#define LEO_LD_SS0_MAP 0x00801000 -#define LEO_LX_CURSOR_MAP 0x00802000 -#define LEO_SS1_MAP 0x00803000 -#define LEO_LC_SS1_USR_MAP 0x01003000 -#define LEO_LD_SS1_MAP 0x01004000 -#define LEO_UNK_MAP 0x01005000 -#define LEO_LX_KRN_MAP 0x01006000 -#define LEO_LC_SS0_KRN_MAP 0x01007000 -#define LEO_LC_SS1_KRN_MAP 0x01008000 -#define LEO_LD_GBL_MAP 0x01009000 -#define LEO_UNK2_MAP 0x0100a000 - -#ifdef __KERNEL__ -struct fbcmap32 { - int index; /* first element (0 origin) */ - int count; - u32 red; - u32 green; - u32 blue; -}; - -#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) -#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) - -struct fbcursor32 { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap32 cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - u32 image; /* cursor image bits */ - u32 mask; /* cursor mask bits */ -}; - -#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) -#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) -#endif - -#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-m68k/fcntl.h b/include/asm-m68k/fcntl.h deleted file mode 100644 index 1c369b2..0000000 --- a/include/asm-m68k/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _M68K_FCNTL_H -#define _M68K_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif /* _M68K_FCNTL_H */ diff --git a/include/asm-m68k/floppy.h b/include/asm-m68k/floppy.h deleted file mode 100644 index 697d503..0000000 --- a/include/asm-m68k/floppy.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Implementation independent bits of the Floppy driver. - * - * much of this file is derived from what was originally the Q40 floppy driver. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999, 2000, 2001 - * - * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net) - * - */ - -#include - -#include - -asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id); - -/* constants... */ - -#undef MAX_DMA_ADDRESS -#define MAX_DMA_ADDRESS 0x00 /* nothing like that */ - - -/* - * Again, the CMOS information doesn't work on m68k.. - */ -#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4) -#define FLOPPY1_TYPE 0 - -/* basically PC init + set use_virtual_dma */ -#define FDC1 m68k_floppy_init() - -#define N_FDC 1 -#define N_DRIVE 8 - - -/* vdma globals adapted from asm-i386/floppy.h */ - -static int virtual_dma_count=0; -static int virtual_dma_residue=0; -static char *virtual_dma_addr=NULL; -static int virtual_dma_mode=0; -static int doing_pdma=0; - -#include - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - - -static __inline__ unsigned char fd_inb(int port) -{ - if(MACH_IS_Q40) - return inb_p(port); - else if(MACH_IS_SUN3X) - return sun3x_82072_fd_inb(port); - return 0; -} - -static __inline__ void fd_outb(unsigned char value, int port) -{ - if(MACH_IS_Q40) - outb_p(value, port); - else if(MACH_IS_SUN3X) - sun3x_82072_fd_outb(value, port); -} - - -static int fd_request_irq(void) -{ - if(MACH_IS_Q40) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", floppy_hardint); - else if(MACH_IS_SUN3X) - return sun3xflop_request_irq(); - return -ENXIO; -} - -static void fd_free_irq(void) -{ - if(MACH_IS_Q40) - free_irq(FLOPPY_IRQ, floppy_hardint); -} - -#define fd_request_dma() vdma_request_dma(FLOPPY_DMA,"floppy") -#define fd_get_dma_residue() vdma_get_dma_residue(FLOPPY_DMA) -#define fd_dma_mem_alloc(size) vdma_mem_alloc(size) -#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io) - -#define fd_enable_irq() /* nothing... */ -#define fd_disable_irq() /* nothing... */ - -#define fd_free_dma() /* nothing */ - -/* No 64k boundary crossing problems on Q40 - no DMA at all */ -#define CROSS_64KB(a,s) (0) - -#define DMA_MODE_READ 0x44 /* i386 look-alike */ -#define DMA_MODE_WRITE 0x48 - - -static int m68k_floppy_init(void) -{ - use_virtual_dma =1; - can_use_virtual_dma = 1; - - - if (MACH_IS_Q40) - return 0x3f0; - else if(MACH_IS_SUN3X) - return sun3xflop_init(); - else - return -1; -} - - -static int vdma_request_dma(unsigned int dmanr, const char * device_id) -{ - return 0; -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static unsigned long vdma_mem_alloc(unsigned long size) -{ - return (unsigned long) vmalloc(size); - -} - -static void _fd_dma_mem_free(unsigned long addr, unsigned long size) -{ - vfree((void *)addr); -} -#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size) - - -/* choose_dma_mode ???*/ - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_pdma = 1; - virtual_dma_port = (MACH_IS_Q40 ? io : 0); - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - - - -static void fd_disable_dma(void) -{ - doing_pdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - - - -/* this is the only truly Q40 specific function */ - -asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id) -{ - register unsigned char st; - -#undef TRACE_FLPY_INT -#define NO_FLOPPY_ASSEMBLER - -#ifdef TRACE_FLPY_INT - static int calls=0; - static int bytes=0; - static int dma_wait=0; -#endif - if(!doing_pdma) { - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - -#ifdef TRACE_FLPY_INT - if(!calls) - bytes = virtual_dma_count; -#endif - - { - register int lcount; - register char *lptr; - - /* serve 1st byte fast: */ - - st=1; - for(lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if(st != 0xa0) - break; - if(virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - } - -#ifdef TRACE_FLPY_INT - calls++; -#endif - if(st == 0x20) - return IRQ_HANDLED; - if(!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -#ifdef TRACE_FLPY_INT - printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", - virtual_dma_count, virtual_dma_residue, calls, bytes, - dma_wait); - calls = 0; - dma_wait=0; -#endif - doing_pdma = 0; - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } -#ifdef TRACE_FLPY_INT - if(!virtual_dma_count) - dma_wait++; -#endif - return IRQ_HANDLED; -} - -#define EXTRA_FLOPPY_PARAMS diff --git a/include/asm-m68k/fpu.h b/include/asm-m68k/fpu.h deleted file mode 100644 index ffb6b8c..0000000 --- a/include/asm-m68k/fpu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __M68K_FPU_H -#define __M68K_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ - -#if defined(CONFIG_M68020) || defined(CONFIG_M68030) -#define FPSTATESIZE (216) -#elif defined(CONFIG_M68040) -#define FPSTATESIZE (96) -#elif defined(CONFIG_M68KFPU_EMU) -#define FPSTATESIZE (28) -#elif defined(CONFIG_M68060) -#define FPSTATESIZE (12) -#else -#define FPSTATESIZE (0) -#endif - -#endif /* __M68K_FPU_H */ diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h deleted file mode 100644 index 6a332a9..0000000 --- a/include/asm-m68k/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-m68k/hardirq.h b/include/asm-m68k/hardirq.h deleted file mode 100644 index 394ee94..0000000 --- a/include/asm-m68k/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -#endif diff --git a/include/asm-m68k/hp300hw.h b/include/asm-m68k/hp300hw.h deleted file mode 100644 index d998ea6..0000000 --- a/include/asm-m68k/hp300hw.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_HP300HW_H -#define _M68K_HP300HW_H - -extern unsigned long hp300_model; - -/* This information was taken from NetBSD */ -#define HP_320 (0) /* 16MHz 68020+HP MMU+16K external cache */ -#define HP_330 (1) /* 16MHz 68020+68851 MMU */ -#define HP_340 (2) /* 16MHz 68030 */ -#define HP_345 (3) /* 50MHz 68030+32K external cache */ -#define HP_350 (4) /* 25MHz 68020+HP MMU+32K external cache */ -#define HP_360 (5) /* 25MHz 68030 */ -#define HP_370 (6) /* 33MHz 68030+64K external cache */ -#define HP_375 (7) /* 50MHz 68030+32K external cache */ -#define HP_380 (8) /* 25MHz 68040 */ -#define HP_385 (9) /* 33MHz 68040 */ - -#define HP_400 (10) /* 50MHz 68030+32K external cache */ -#define HP_425T (11) /* 25MHz 68040 - model 425t */ -#define HP_425S (12) /* 25MHz 68040 - model 425s */ -#define HP_425E (13) /* 25MHz 68040 - model 425e */ -#define HP_433T (14) /* 33MHz 68040 - model 433t */ -#define HP_433S (15) /* 33MHz 68040 - model 433s */ - -#endif /* _M68K_HP300HW_H */ diff --git a/include/asm-m68k/hw_irq.h b/include/asm-m68k/hw_irq.h deleted file mode 100644 index eacef09..0000000 --- a/include/asm-m68k/hw_irq.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_HW_IRQ_H -#define __ASM_M68K_HW_IRQ_H - -/* Dummy include. */ - -#endif diff --git a/include/asm-m68k/hwtest.h b/include/asm-m68k/hwtest.h deleted file mode 100644 index 402c8a4..0000000 --- a/include/asm-m68k/hwtest.h +++ /dev/null @@ -1,15 +0,0 @@ -/* Routines to test for presence/absence of hardware registers: - * see arch/m68k/mm/hwtest.c. - * -- PMM 05/1998 - * - * Removed __init from decls. We might want them in modules, and - * the code is tiny anyway. 16/5/98 pb - */ - -#ifndef __ASM_HWTEST_H -#define __ASM_HWTEST_H - -extern int hwreg_present(volatile void *regp); -extern int hwreg_write(volatile void *regp, unsigned short val); - -#endif diff --git a/include/asm-m68k/ide.h b/include/asm-m68k/ide.h deleted file mode 100644 index b996a3c..0000000 --- a/include/asm-m68k/ide.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * linux/include/asm-m68k/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - */ - -/* Copyright(c) 1996 Kars de Jong */ -/* Based on the ide driver from 1.2.13pl8 */ - -/* - * Credits (alphabetical): - * - * - Bjoern Brauel - * - Kars de Jong - * - Torsten Ebeling - * - Dwight Engen - * - Thorsten Floeck - * - Roman Hodek - * - Guenther Kelleter - * - Chris Lawrence - * - Michael Rausch - * - Christian Sauer - * - Michael Schmitz - * - Jes Soerensen - * - Michael Thurm - * - Geert Uytterhoeven - */ - -#ifndef _M68K_IDE_H -#define _M68K_IDE_H - -#ifdef __KERNEL__ - - -#include -#include -#include - -#ifdef CONFIG_ATARI -#include -#include -#endif - -#ifdef CONFIG_MAC -#include -#endif - -/* - * Get rid of defs from io.h - ide has its private and conflicting versions - * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we - * always use the `raw' MMIO versions - */ -#undef inb -#undef inw -#undef insw -#undef inl -#undef insl -#undef outb -#undef outw -#undef outsw -#undef outl -#undef outsl -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel - -#define inb in_8 -#define inw in_be16 -#define insw(port, addr, n) raw_insw((u16 *)port, addr, n) -#define inl in_be32 -#define insl(port, addr, n) raw_insl((u32 *)port, addr, n) -#define outb(val, port) out_8(port, val) -#define outw(val, port) out_be16(port, val) -#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) -#define outl(val, port) out_be32(port, val) -#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) -#define readb in_8 -#define readw in_be16 -#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n) -#define readl in_be32 -#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n) -#define writeb(val, port) out_8(port, val) -#define writew(val, port) out_be16(port, val) -#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) -#define writel(val, port) out_be32(port, val) -#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) -#if defined(CONFIG_ATARI) || defined(CONFIG_Q40) -#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n) -#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n) -#endif - -#ifdef CONFIG_BLK_DEV_FALCON_IDE -#define IDE_ARCH_LOCK - -extern int falconide_intr_lock; - -static __inline__ void ide_release_lock (void) -{ - if (MACH_IS_ATARI) { - if (falconide_intr_lock == 0) { - printk("ide_release_lock: bug\n"); - return; - } - falconide_intr_lock = 0; - stdma_release(); - } -} - -static __inline__ void -ide_get_lock(irq_handler_t handler, void *data) -{ - if (MACH_IS_ATARI) { - if (falconide_intr_lock == 0) { - if (in_interrupt() > 0) - panic( "Falcon IDE hasn't ST-DMA lock in interrupt" ); - stdma_lock(handler, data); - falconide_intr_lock = 1; - } - } -} -#endif /* CONFIG_BLK_DEV_FALCON_IDE */ - -#define IDE_ARCH_ACK_INTR -#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) - -#endif /* __KERNEL__ */ -#endif /* _M68K_IDE_H */ diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h deleted file mode 100644 index 160616a..0000000 --- a/include/asm-m68k/idprom.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _M68K_IDPROM_H -#define _M68K_IDPROM_H -/* - * idprom.h: Macros and defines for idprom routines - * - * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include - -struct idprom { - u8 id_format; /* Format identifier (always 0x01) */ - u8 id_machtype; /* Machine type */ - u8 id_ethaddr[6]; /* Hardware ethernet address */ - s32 id_date; /* Date of manufacture */ - u32 id_sernum:24; /* Unique serial number */ - u8 id_cksum; /* Checksum - xor of the data bytes */ - u8 reserved[16]; -}; - -extern struct idprom *idprom; -extern void idprom_init(void); - -/* Sun3: in control space */ -#define SUN3_IDPROM_BASE 0x00000000 - -#endif /* !(_M68K_IDPROM_H) */ diff --git a/include/asm-m68k/intersil.h b/include/asm-m68k/intersil.h deleted file mode 100644 index f482902..0000000 --- a/include/asm-m68k/intersil.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _SUN3_INTERSIL_H -#define _SUN3_INTERSIL_H -/* bits 0 and 1 */ -#define INTERSIL_FREQ_32K 0x00 -#define INTERSIL_FREQ_1M 0x01 -#define INTERSIL_FREQ_2M 0x02 -#define INTERSIL_FREQ_4M 0x03 - -/* bit 2 */ -#define INTERSIL_12H_MODE 0x00 -#define INTERSIL_24H_MODE 0x04 - -/* bit 3 */ -#define INTERSIL_STOP 0x00 -#define INTERSIL_RUN 0x08 - -/* bit 4 */ -#define INTERSIL_INT_ENABLE 0x10 -#define INTERSIL_INT_DISABLE 0x00 - -/* bit 5 */ -#define INTERSIL_MODE_NORMAL 0x00 -#define INTERSIL_MODE_TEST 0x20 - -#define INTERSIL_HZ_100_MASK 0x02 - -struct intersil_dt { - unsigned char csec; - unsigned char hour; - unsigned char minute; - unsigned char second; - unsigned char month; - unsigned char day; - unsigned char year; - unsigned char weekday; -}; - -struct intersil_7170 { - struct intersil_dt counter; - struct intersil_dt alarm; - unsigned char int_reg; - unsigned char cmd_reg; -}; - -extern volatile char* clock_va; -#define intersil_clock ((volatile struct intersil_7170 *) clock_va) -#define intersil_clear() (void)intersil_clock->int_reg -#endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h deleted file mode 100644 index 9e673e3..0000000 --- a/include/asm-m68k/io.h +++ /dev/null @@ -1,369 +0,0 @@ -/* - * linux/include/asm-m68k/io.h - * - * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other - * IO access - * - added Q40 support - * - added skeleton for GG-II and Amiga PCMCIA - * 2/3/01 RZ: - moved a few more defs into raw_io.h - * - * inX/outX should not be used by any driver unless it does - * ISA access. Other drivers should use function defined in raw_io.h - * or define its own macros on top of these. - * - * inX(),outX() are for ISA I/O - * isa_readX(),isa_writeX() are for ISA memory - */ - -#ifndef _IO_H -#define _IO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -#include - -#ifdef CONFIG_ATARI -#include -#endif - - -/* - * IO/MEM definitions for various ISA bridges - */ - - -#ifdef CONFIG_Q40 - -#define q40_isa_io_base 0xff400000 -#define q40_isa_mem_base 0xff800000 - -#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr))) -#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+ 4*((unsigned long)(ioaddr))) -#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr))) -#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr))) - -#define MULTI_ISA 0 -#endif /* Q40 */ - -/* GG-II Zorro to ISA bridge */ -#ifdef CONFIG_GG2 - -extern unsigned long gg2_isa_base; -#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4)) -#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+ ((unsigned long)(ioaddr)*4)) -#define GG2_ISA_MEM_B(madr) (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff)) -#define GG2_ISA_MEM_W(madr) (gg2_isa_base+ (((unsigned long)(madr)*4) & 0xfffff)) - -#ifndef MULTI_ISA -#define MULTI_ISA 0 -#else -#undef MULTI_ISA -#define MULTI_ISA 1 -#endif -#endif /* GG2 */ - -#ifdef CONFIG_AMIGA_PCMCIA -#include - -#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) ) -#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) ) - -#ifndef MULTI_ISA -#define MULTI_ISA 0 -#else -#undef MULTI_ISA -#define MULTI_ISA 1 -#endif -#endif /* AMIGA_PCMCIA */ - - - -#ifdef CONFIG_ISA - -#if MULTI_ISA == 0 -#undef MULTI_ISA -#endif - -#define ISA_TYPE_Q40 (1) -#define ISA_TYPE_GG2 (2) -#define ISA_TYPE_AG (3) - -#if defined(CONFIG_Q40) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_Q40 -#define ISA_SEX 0 -#endif -#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_AG -#define ISA_SEX 1 -#endif -#if defined(CONFIG_GG2) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_GG2 -#define ISA_SEX 0 -#endif - -#ifdef MULTI_ISA -extern int isa_type; -extern int isa_sex; - -#define ISA_TYPE isa_type -#define ISA_SEX isa_sex -#endif - -/* - * define inline addr translation functions. Normally only one variant will - * be compiled in so the case statement will be optimised away - */ - -static inline u8 __iomem *isa_itb(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr); -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u16 __iomem *isa_itw(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr); -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u32 __iomem *isa_itl(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr); -#endif - default: return 0; /* avoid warnings, just in case */ - } -} -static inline u8 __iomem *isa_mtb(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u8 __iomem *)addr; -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u16 __iomem *isa_mtw(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u16 __iomem *)addr; -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} - - -#define isa_inb(port) in_8(isa_itb(port)) -#define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port))) -#define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port))) -#define isa_outb(val,port) out_8(isa_itb(port),(val)) -#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val))) -#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val))) - -#define isa_readb(p) in_8(isa_mtb((unsigned long)(p))) -#define isa_readw(p) \ - (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \ - : in_le16(isa_mtw((unsigned long)(p)))) -#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val)) -#define isa_writew(val,p) \ - (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ - : out_le16(isa_mtw((unsigned long)(p)),(val))) - -static inline void isa_delay(void) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: isa_outb(0,0x80); break; -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: break; -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: break; -#endif - default: break; /* avoid warnings */ - } -} - -#define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;}) -#define isa_outb_p(v,p) ({isa_outb((v),(p));isa_delay();}) -#define isa_inw_p(p) ({u16 v=isa_inw(p);isa_delay();v;}) -#define isa_outw_p(v,p) ({isa_outw((v),(p));isa_delay();}) -#define isa_inl_p(p) ({u32 v=isa_inl(p);isa_delay();v;}) -#define isa_outl_p(v,p) ({isa_outl((v),(p));isa_delay();}) - -#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr)) -#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr)) - -#define isa_insw(port, buf, nr) \ - (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) : \ - raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr))) - -#define isa_outsw(port, buf, nr) \ - (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \ - raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr))) - -#define isa_insl(port, buf, nr) \ - (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) : \ - raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) - -#define isa_outsl(port, buf, nr) \ - (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \ - raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) - - -#define inb isa_inb -#define inb_p isa_inb_p -#define outb isa_outb -#define outb_p isa_outb_p -#define inw isa_inw -#define inw_p isa_inw_p -#define outw isa_outw -#define outw_p isa_outw_p -#define inl isa_inl -#define inl_p isa_inl_p -#define outl isa_outl -#define outl_p isa_outl_p -#define insb isa_insb -#define insw isa_insw -#define insl isa_insl -#define outsb isa_outsb -#define outsw isa_outsw -#define outsl isa_outsl -#define readb isa_readb -#define readw isa_readw -#define writeb isa_writeb -#define writew isa_writew - -#else /* CONFIG_ISA */ - -/* - * We need to define dummy functions for GENERIC_IOMAP support. - */ -#define inb(port) 0xff -#define inb_p(port) 0xff -#define outb(val,port) ((void)0) -#define outb_p(val,port) ((void)0) -#define inw(port) 0xffff -#define outw(val,port) ((void)0) -#define inl(port) 0xffffffffUL -#define outl(val,port) ((void)0) - -#define insb(port,buf,nr) ((void)0) -#define outsb(port,buf,nr) ((void)0) -#define insw(port,buf,nr) ((void)0) -#define outsw(port,buf,nr) ((void)0) -#define insl(port,buf,nr) ((void)0) -#define outsl(port,buf,nr) ((void)0) - -/* - * These should be valid on any ioremap()ed region - */ -#define readb(addr) in_8(addr) -#define writeb(val,addr) out_8((addr),(val)) -#define readw(addr) in_le16(addr) -#define writew(val,addr) out_le16((addr),(val)) - -#endif /* CONFIG_ISA */ - -#define readl(addr) in_le32(addr) -#define writel(val,addr) out_le32((addr),(val)) - -#define mmiowb() - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void __iomem *ioremap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - __builtin_memset((void __force *) addr, val, count); -} -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __builtin_memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __builtin_memcpy((void __force *) dst, src, count); -} - -#ifndef CONFIG_SUN3 -#define IO_SPACE_LIMIT 0xffff -#else -#define IO_SPACE_LIMIT 0x0fffffff -#endif - -#endif /* __KERNEL__ */ - -#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* _IO_H */ diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/include/asm-m68k/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/ioctls.h b/include/asm-m68k/ioctls.h deleted file mode 100644 index b8d2f4b..0000000 --- a/include/asm-m68k/ioctls.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __ARCH_M68K_IOCTLS_H__ -#define __ARCH_M68K_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/include/asm-m68k/ipcbuf.h b/include/asm-m68k/ipcbuf.h deleted file mode 100644 index a623ea3..0000000 --- a/include/asm-m68k/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __m68k_IPCBUF_H__ -#define __m68k_IPCBUF_H__ - -/* - * The user_ipc_perm structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __m68k_IPCBUF_H__ */ diff --git a/include/asm-m68k/irq.h b/include/asm-m68k/irq.h deleted file mode 100644 index 226bfc0..0000000 --- a/include/asm-m68k/irq.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef _M68K_IRQ_H_ -#define _M68K_IRQ_H_ - -#include -#include -#include - -/* - * This should be the same as the max(NUM_X_SOURCES) for all the - * different m68k hosts compiled into the kernel. - * Currently the Atari has 72 and the Amiga 24, but if both are - * supported in the kernel it is better to make room for 72. - */ -#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -#define NR_IRQS 200 -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) -#define NR_IRQS 72 -#elif defined(CONFIG_Q40) -#define NR_IRQS 43 -#elif defined(CONFIG_AMIGA) -#define NR_IRQS 32 -#elif defined(CONFIG_APOLLO) -#define NR_IRQS 24 -#elif defined(CONFIG_HP300) -#define NR_IRQS 8 -#else -#define NR_IRQS 0 -#endif - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -/* - * Interrupt source definitions - * General interrupt sources are the level 1-7. - * Adding an interrupt service routine for one of these sources - * results in the addition of that routine to a chain of routines. - * Each one is called in succession. Each individual interrupt - * service routine should determine if the device associated with - * that routine requires service. - */ - -#define IRQ_SPURIOUS 0 - -#define IRQ_AUTO_1 1 /* level 1 interrupt */ -#define IRQ_AUTO_2 2 /* level 2 interrupt */ -#define IRQ_AUTO_3 3 /* level 3 interrupt */ -#define IRQ_AUTO_4 4 /* level 4 interrupt */ -#define IRQ_AUTO_5 5 /* level 5 interrupt */ -#define IRQ_AUTO_6 6 /* level 6 interrupt */ -#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ - -#define IRQ_USER 8 - -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -typedef struct irq_node { - int (*handler)(int, void *); - void *dev_id; - struct irq_node *next; - unsigned long flags; - const char *devname; -} irq_node_t; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_controller { - const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); -}; - -extern int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); - -/* - * This function returns a new irq_node_t - */ -extern irq_node_t *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); - -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); - -#endif /* _M68K_IRQ_H_ */ diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/include/asm-m68k/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/include/asm-m68k/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/kmap_types.h b/include/asm-m68k/kmap_types.h deleted file mode 100644 index c843c63..0000000 --- a/include/asm-m68k/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/include/asm-m68k/linkage.h b/include/asm-m68k/linkage.h deleted file mode 100644 index 5a822bb..0000000 --- a/include/asm-m68k/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 4 -#define __ALIGN_STR ".align 4" - -#endif diff --git a/include/asm-m68k/local.h b/include/asm-m68k/local.h deleted file mode 100644 index 6c25926..0000000 --- a/include/asm-m68k/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/include/asm-m68k/mac_asc.h b/include/asm-m68k/mac_asc.h deleted file mode 100644 index fc2e546..0000000 --- a/include/asm-m68k/mac_asc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Apple Sound Chip - */ - -#ifndef __ASM_MAC_ASC_H -#define __ASM_MAC_ASC_H - -/* - * ASC offsets and controls - */ - -#define ASC_BUF_BASE 0x00 /* RAM buffer offset */ -#define ASC_BUF_SIZE 0x800 - -#define ASC_CONTROL 0x800 -#define ASC_CONTROL_OFF 0x00 -#define ASC_FREQ(chan,byte) ((0x810)+((chan)<<3)+(byte)) -#define ASC_ENABLE 0x801 -#define ASC_ENABLE_SAMPLE 0x02 -#define ASC_MODE 0x802 -#define ASC_MODE_SAMPLE 0x02 - -#define ASC_VOLUME 0x806 -#define ASC_CHAN 0x807 /* ??? */ - - -#endif diff --git a/include/asm-m68k/mac_baboon.h b/include/asm-m68k/mac_baboon.h deleted file mode 100644 index c2a042b..0000000 --- a/include/asm-m68k/mac_baboon.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Definitions for the "Baboon" custom IC on the PowerBook 190. - */ - -#define BABOON_BASE (0x50F1A000) /* same as IDE controller base */ - -#ifndef __ASSEMBLY__ - -struct baboon { - char pad1[208]; /* generic IDE registers, not used here */ - short mb_control; /* Control register: - * bit 5 : slot 2 power control - * bit 6 : slot 1 power control - */ - char pad2[2]; - short mb_status; /* (0xD4) media bay status register: - * - * bit 0: ???? - * bit 1: IDE interrupt active? - * bit 2: bay status, 0 = full, 1 = empty - * bit 3: ???? - */ - char pad3[2]; /* (0xD6) not used */ - short mb_ifr; /* (0xD8) media bay interrupt flags register: - * - * bit 0: ???? - * bit 1: IDE controller interrupt - * bit 2: media bay status change interrupt - */ -}; - -#endif /* __ASSEMBLY **/ diff --git a/include/asm-m68k/mac_iop.h b/include/asm-m68k/mac_iop.h deleted file mode 100644 index a2c7e6f..0000000 --- a/include/asm-m68k/mac_iop.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * I/O Processor (IOP) defines and structures, mostly snagged from A/UX - * header files. - * - * The original header from which this was taken is copyrighted. I've done some - * rewriting (in fact my changes make this a bit more readable, IMHO) but some - * more should be done. - */ - -/* - * This is the base address of the IOPs. Use this as the address of - * a "struct iop" (see below) to see where the actual registers fall. - */ - -#define SCC_IOP_BASE_IIFX (0x50F04000) -#define ISM_IOP_BASE_IIFX (0x50F12000) - -#define SCC_IOP_BASE_QUADRA (0x50F0C000) -#define ISM_IOP_BASE_QUADRA (0x50F1E000) - -/* IOP status/control register bits: */ - -#define IOP_BYPASS 0x01 /* bypass-mode hardware access */ -#define IOP_AUTOINC 0x02 /* allow autoincrement of ramhi/lo */ -#define IOP_RUN 0x04 /* set to 0 to reset IOP chip */ -#define IOP_IRQ 0x08 /* generate IRQ to IOP if 1 */ -#define IOP_INT0 0x10 /* intr priority from IOP to host */ -#define IOP_INT1 0x20 /* intr priority from IOP to host */ -#define IOP_HWINT 0x40 /* IRQ from hardware; bypass mode only */ -#define IOP_DMAINACTIVE 0x80 /* no DMA request active; bypass mode only */ - -#define NUM_IOPS 2 -#define NUM_IOP_CHAN 7 -#define NUM_IOP_MSGS NUM_IOP_CHAN*8 -#define IOP_MSG_LEN 32 - -/* IOP reference numbers, used by the globally-visible iop_xxx functions */ - -#define IOP_NUM_SCC 0 -#define IOP_NUM_ISM 1 - -/* IOP channel states */ - -#define IOP_MSG_IDLE 0 /* idle */ -#define IOP_MSG_NEW 1 /* new message sent */ -#define IOP_MSG_RCVD 2 /* message received; processing */ -#define IOP_MSG_COMPLETE 3 /* message processing complete */ - -/* IOP message status codes */ - -#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */ -#define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */ -#define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */ -#define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */ -#define IOP_MSGSTATUS_UNSOL 6 /* message is unsolicited */ - -/* IOP memory addresses of the members of the mac_iop_kernel structure. */ - -#define IOP_ADDR_MAX_SEND_CHAN 0x0200 -#define IOP_ADDR_SEND_STATE 0x0201 -#define IOP_ADDR_PATCH_CTRL 0x021F -#define IOP_ADDR_SEND_MSG 0x0220 -#define IOP_ADDR_MAX_RECV_CHAN 0x0300 -#define IOP_ADDR_RECV_STATE 0x0301 -#define IOP_ADDR_ALIVE 0x031F -#define IOP_ADDR_RECV_MSG 0x0320 - -#ifndef __ASSEMBLY__ - -/* - * IOP Control registers, staggered because in usual Apple style they were - * too lazy to decode the A0 bit. This structure is assumed to begin at - * one of the xxx_IOP_BASE addresses given above. - */ - -struct mac_iop { - __u8 ram_addr_hi; /* shared RAM address hi byte */ - __u8 pad0; - __u8 ram_addr_lo; /* shared RAM address lo byte */ - __u8 pad1; - __u8 status_ctrl; /* status/control register */ - __u8 pad2[3]; - __u8 ram_data; /* RAM data byte at ramhi/lo */ - - __u8 pad3[23]; - - /* Bypass-mode hardware access registers */ - - union { - struct { /* SCC registers */ - __u8 sccb_cmd; /* SCC B command reg */ - __u8 pad4; - __u8 scca_cmd; /* SCC A command reg */ - __u8 pad5; - __u8 sccb_data; /* SCC B data */ - __u8 pad6; - __u8 scca_data; /* SCC A data */ - } scc_regs; - - struct { /* ISM registers */ - __u8 wdata; /* write a data byte */ - __u8 pad7; - __u8 wmark; /* write a mark byte */ - __u8 pad8; - __u8 wcrc; /* write 2-byte crc to disk */ - __u8 pad9; - __u8 wparams; /* write the param regs */ - __u8 pad10; - __u8 wphase; /* write the phase states & dirs */ - __u8 pad11; - __u8 wsetup; /* write the setup register */ - __u8 pad12; - __u8 wzeroes; /* mode reg: 1's clr bits, 0's are x */ - __u8 pad13; - __u8 wones; /* mode reg: 1's set bits, 0's are x */ - __u8 pad14; - __u8 rdata; /* read a data byte */ - __u8 pad15; - __u8 rmark; /* read a mark byte */ - __u8 pad16; - __u8 rerror; /* read the error register */ - __u8 pad17; - __u8 rparams; /* read the param regs */ - __u8 pad18; - __u8 rphase; /* read the phase states & dirs */ - __u8 pad19; - __u8 rsetup; /* read the setup register */ - __u8 pad20; - __u8 rmode; /* read the mode register */ - __u8 pad21; - __u8 rhandshake; /* read the handshake register */ - } ism_regs; - } b; -}; - -/* This structure is used to track IOP messages in the Linux kernel */ - -struct iop_msg { - struct iop_msg *next; /* next message in queue or NULL */ - uint iop_num; /* IOP number */ - uint channel; /* channel number */ - void *caller_priv; /* caller private data */ - int status; /* status of this message */ - __u8 message[IOP_MSG_LEN]; /* the message being sent/received */ - __u8 reply[IOP_MSG_LEN]; /* the reply to the message */ - void (*handler)(struct iop_msg *); - /* function to call when reply recvd */ -}; - -extern int iop_scc_present,iop_ism_present; - -extern int iop_listen(uint, uint, - void (*handler)(struct iop_msg *), - const char *); -extern int iop_send_message(uint, uint, void *, uint, __u8 *, - void (*)(struct iop_msg *)); -extern void iop_complete_message(struct iop_msg *); -extern void iop_upload_code(uint, __u8 *, uint, __u16); -extern void iop_download_code(uint, __u8 *, uint, __u16); -extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16); - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_mouse.h b/include/asm-m68k/mac_mouse.h deleted file mode 100644 index 39a5c29..0000000 --- a/include/asm-m68k/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/include/asm-m68k/mac_oss.h b/include/asm-m68k/mac_oss.h deleted file mode 100644 index 7221f72..0000000 --- a/include/asm-m68k/mac_oss.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * OSS - * - * This is used in place of VIA2 on the IIfx. - */ - -#define OSS_BASE (0x50f1a000) - -/* - * Interrupt level offsets for mac_oss->irq_level - */ - -#define OSS_NUBUS0 0 -#define OSS_NUBUS1 1 -#define OSS_NUBUS2 2 -#define OSS_NUBUS3 3 -#define OSS_NUBUS4 4 -#define OSS_NUBUS5 5 -#define OSS_IOPISM 6 -#define OSS_IOPSCC 7 -#define OSS_SOUND 8 -#define OSS_SCSI 9 -#define OSS_60HZ 10 -#define OSS_VIA1 11 -#define OSS_UNUSED1 12 -#define OSS_UNUSED2 13 -#define OSS_PARITY 14 -#define OSS_UNUSED3 15 - -#define OSS_NUM_SOURCES 16 - -/* - * Pending interrupt bits in mac_oss->irq_pending - */ - -#define OSS_IP_NUBUS0 0x0001 -#define OSS_IP_NUBUS1 0x0002 -#define OSS_IP_NUBUS2 0x0004 -#define OSS_IP_NUBUS3 0x0008 -#define OSS_IP_NUBUS4 0x0010 -#define OSS_IP_NUBUS5 0x0020 -#define OSS_IP_IOPISM 0x0040 -#define OSS_IP_IOPSCC 0x0080 -#define OSS_IP_SOUND 0x0100 -#define OSS_IP_SCSI 0x0200 -#define OSS_IP_60HZ 0x0400 -#define OSS_IP_VIA1 0x0800 -#define OSS_IP_UNUSED1 0x1000 -#define OSS_IP_UNUSED2 0x2000 -#define OSS_IP_PARITY 0x4000 -#define OSS_IP_UNUSED3 0x8000 - -#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5) - -/* - * Rom Control Register - */ - -#define OSS_POWEROFF 0x80 - -/* - * OSS Interrupt levels for various sub-systems - * - * This mapping is layed out with two things in mind: first, we try to keep - * things on their own levels to avoid having to do double-dispatches. Second, - * the levels match as closely as possible the alternate IRQ mapping mode (aka - * "A/UX mode") available on some VIA machines. - */ - -#define OSS_IRQLEV_DISABLED 0 -#define OSS_IRQLEV_IOPISM 1 /* ADB? */ -#define OSS_IRQLEV_SCSI IRQ_AUTO_2 -#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */ -#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */ - -#ifndef __ASSEMBLY__ - -struct mac_oss { - __u8 irq_level[0x10]; /* [0x000-0x00f] Interrupt levels */ - __u8 padding0[0x1F2]; /* [0x010-0x201] IO space filler */ - __u16 irq_pending; /* [0x202-0x203] pending interrupts bits */ - __u8 rom_ctrl; /* [0x204-0x204] ROM cntl reg (for poweroff) */ - __u8 padding1[0x2]; /* [0x205-0x206] currently unused by A/UX */ - __u8 ack_60hz; /* [0x207-0x207] 60 Hz ack. */ -}; - -extern volatile struct mac_oss *oss; -extern int oss_present; - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_psc.h b/include/asm-m68k/mac_psc.h deleted file mode 100644 index 7808bb0..0000000 --- a/include/asm-m68k/mac_psc.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Apple Peripheral System Controller (PSC) - * - * The PSC is used on the AV Macs to control IO functions not handled - * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA - * channels. - * - * The first seven DMA channels appear to be "one-shot" and are actually - * sets of two channels; one member is active while the other is being - * configured, and then you flip the active member and start all over again. - * The one-shot channels are grouped together and are: - * - * 1. SCSI - * 2. Ethernet Read - * 3. Ethernet Write - * 4. Floppy Disk Controller - * 5. SCC Channel A Receive - * 6. SCC Channel B Receive - * 7. SCC Channel A Transmit - * - * The remaining two channels are handled somewhat differently. They appear - * to be closely tied and share one set of registers. They also seem to run - * continuously, although how you keep the buffer filled in this scenario is - * not understood as there seems to be only one input and one output buffer - * pointer. - * - * Much of this was extrapolated from what was known about the Ethernet - * registers and subsequently confirmed using MacsBug (ie by pinging the - * machine with easy-to-find patterns and looking for them in the DMA - * buffers, or by sending a file over the serial ports and finding the - * file in the buffers.) - * - * 1999-05-25 (jmt) - */ - -#define PSC_BASE (0x50F31000) - -/* - * The IER/IFR registers work like the VIA, except that it has 4 - * of them each on different interrupt levels, and each register - * set only seems to handle four interrupts instead of seven. - * - * To access a particular set of registers, add 0xn0 to the base - * where n = 3,4,5 or 6. - */ - -#define pIFRbase 0x100 -#define pIERbase 0x104 - -/* - * One-shot DMA control registers - */ - -#define PSC_MYSTERY 0x804 - -#define PSC_CTL_BASE 0xC00 - -#define PSC_SCSI_CTL 0xC00 -#define PSC_ENETRD_CTL 0xC10 -#define PSC_ENETWR_CTL 0xC20 -#define PSC_FDC_CTL 0xC30 -#define PSC_SCCA_CTL 0xC40 -#define PSC_SCCB_CTL 0xC50 -#define PSC_SCCATX_CTL 0xC60 - -/* - * DMA channels. Add +0x10 for the second channel in the set. - * You're supposed to use one channel while the other runs and - * then flip channels and do the whole thing again. - */ - -#define PSC_ADDR_BASE 0x1000 -#define PSC_LEN_BASE 0x1004 -#define PSC_CMD_BASE 0x1008 - -#define PSC_SET0 0x00 -#define PSC_SET1 0x10 - -#define PSC_SCSI_ADDR 0x1000 /* confirmed */ -#define PSC_SCSI_LEN 0x1004 /* confirmed */ -#define PSC_SCSI_CMD 0x1008 /* confirmed */ -#define PSC_ENETRD_ADDR 0x1020 /* confirmed */ -#define PSC_ENETRD_LEN 0x1024 /* confirmed */ -#define PSC_ENETRD_CMD 0x1028 /* confirmed */ -#define PSC_ENETWR_ADDR 0x1040 /* confirmed */ -#define PSC_ENETWR_LEN 0x1044 /* confirmed */ -#define PSC_ENETWR_CMD 0x1048 /* confirmed */ -#define PSC_FDC_ADDR 0x1060 /* strongly suspected */ -#define PSC_FDC_LEN 0x1064 /* strongly suspected */ -#define PSC_FDC_CMD 0x1068 /* strongly suspected */ -#define PSC_SCCA_ADDR 0x1080 /* confirmed */ -#define PSC_SCCA_LEN 0x1084 /* confirmed */ -#define PSC_SCCA_CMD 0x1088 /* confirmed */ -#define PSC_SCCB_ADDR 0x10A0 /* confirmed */ -#define PSC_SCCB_LEN 0x10A4 /* confirmed */ -#define PSC_SCCB_CMD 0x10A8 /* confirmed */ -#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */ -#define PSC_SCCATX_LEN 0x10C4 /* confirmed */ -#define PSC_SCCATX_CMD 0x10C8 /* confirmed */ - -/* - * Free-running DMA registers. The only part known for sure are the bits in - * the control register, the buffer addresses and the buffer length. Everything - * else is anybody's guess. - * - * These registers seem to be mirrored every thirty-two bytes up until offset - * 0x300. It's safe to assume then that a new set of registers starts there. - */ - -#define PSC_SND_CTL 0x200 /* - * [ 16-bit ] - * Sound (Singer?) control register. - * - * bit 0 : ???? - * bit 1 : ???? - * bit 2 : Set to one to enable sound - * output. Possibly a mute flag. - * bit 3 : ???? - * bit 4 : ???? - * bit 5 : ???? - * bit 6 : Set to one to enable pass-thru - * audio. In this mode the audio data - * seems to appear in both the input - * buffer and the output buffer. - * bit 7 : Set to one to activate the - * sound input DMA or zero to - * disable it. - * bit 8 : Set to one to activate the - * sound output DMA or zero to - * disable it. - * bit 9 : \ - * bit 11 : | - * These two bits control the sample - * rate. Usually set to binary 10 and - * MacOS 8.0 says I'm at 48 KHz. Using - * a binary value of 01 makes things - * sound about 1/2 speed (24 KHz?) and - * binary 00 is slower still (22 KHz?) - * - * Setting this to 0x0000 is a good way to - * kill all DMA at boot time so that the - * PSC won't overwrite the kernel image - * with sound data. - */ - -/* - * 0x0202 - 0x0203 is unused. Writing there - * seems to clobber the control register. - */ - -#define PSC_SND_SOURCE 0x204 /* - * [ 32-bit ] - * Controls input source and volume: - * - * bits 12-15 : input source volume, 0 - F - * bits 16-19 : unknown, always 0x5 - * bits 20-23 : input source selection: - * 0x3 = CD Audio - * 0x4 = External Audio - * - * The volume is definitely not the general - * output volume as it doesn't affect the - * alert sound volume. - */ -#define PSC_SND_STATUS1 0x208 /* - * [ 32-bit ] - * Appears to be a read-only status register. - * The usual value is 0x00400002. - */ -#define PSC_SND_HUH3 0x20C /* - * [ 16-bit ] - * Unknown 16-bit value, always 0x0000. - */ -#define PSC_SND_BITS2GO 0x20E /* - * [ 16-bit ] - * Counts down to zero from some constant - * value. The value appears to be the - * number of _bits_ remaining before the - * buffer is full, which would make sense - * since Apple's docs say the sound DMA - * channels are 1 bit wide. - */ -#define PSC_SND_INADDR 0x210 /* - * [ 32-bit ] - * Address of the sound input DMA buffer - */ -#define PSC_SND_OUTADDR 0x214 /* - * [ 32-bit ] - * Address of the sound output DMA buffer - */ -#define PSC_SND_LEN 0x218 /* - * [ 16-bit ] - * Length of both buffers in eight-byte units. - */ -#define PSC_SND_HUH4 0x21A /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ -#define PSC_SND_STATUS2 0x21C /* - * [ 16-bit ] - * Appears to e a read-only status register. - * The usual value is 0x0200. - */ -#define PSC_SND_HUH5 0x21E /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ - -#ifndef __ASSEMBLY__ - -extern volatile __u8 *psc; -extern int psc_present; - -/* - * Access functions - */ - -static inline void psc_write_byte(int offset, __u8 data) -{ - *((volatile __u8 *)(psc + offset)) = data; -} - -static inline void psc_write_word(int offset, __u16 data) -{ - *((volatile __u16 *)(psc + offset)) = data; -} - -static inline void psc_write_long(int offset, __u32 data) -{ - *((volatile __u32 *)(psc + offset)) = data; -} - -static inline u8 psc_read_byte(int offset) -{ - return *((volatile __u8 *)(psc + offset)); -} - -static inline u16 psc_read_word(int offset) -{ - return *((volatile __u16 *)(psc + offset)); -} - -static inline u32 psc_read_long(int offset) -{ - return *((volatile __u32 *)(psc + offset)); -} - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_via.h b/include/asm-m68k/mac_via.h deleted file mode 100644 index 39afb43..0000000 --- a/include/asm-m68k/mac_via.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * 6522 Versatile Interface Adapter (VIA) - * - * There are two of these on the Mac II. Some IRQ's are vectored - * via them as are assorted bits and bobs - eg rtc, adb. The picture - * is a bit incomplete as the Mac documentation doesn't cover this well - */ - -#ifndef _ASM_MAC_VIA_H_ -#define _ASM_MAC_VIA_H_ - -/* - * Base addresses for the VIAs. There are two in every machine, - * although on some machines the second is an RBV or an OSS. - * The OSS is different enough that it's handled separately. - * - * Do not use these values directly; use the via1 and via2 variables - * instead (and don't forget to check rbv_present when using via2!) - */ - -#define VIA1_BASE (0x50F00000) -#define VIA2_BASE (0x50F02000) -#define RBV_BASE (0x50F26000) - -/* - * Not all of these are true post MacII I think. - * CSA: probably the ones CHRP marks as 'unused' change purposes - * when the IWM becomes the SWIM. - * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html - * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf - * - * also, http://developer.apple.com/technotes/hw/hw_09.html claims the - * following changes for IIfx: - * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP. - * Also, "All of the functionality of VIA2 has been moved to other chips". - */ - -#define VIA1A_vSccWrReq 0x80 /* SCC write. (input) - * [CHRP] SCC WREQ: Reflects the state of the - * Wait/Request pins from the SCC. - * [Macintosh Family Hardware] - * as CHRP on SE/30,II,IIx,IIcx,IIci. - * on IIfx, "0 means an active request" - */ -#define VIA1A_vRev8 0x40 /* Revision 8 board ??? - * [CHRP] En WaitReqB: Lets the WaitReq_L - * signal from port B of the SCC appear on - * the PA7 input pin. Output. - * [Macintosh Family] On the SE/30, this - * is the bit to flip screen buffers. - * 0=alternate, 1=main. - * on II,IIx,IIcx,IIci,IIfx this is a bit - * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx - */ -#define VIA1A_vHeadSel 0x20 /* Head select for IWM. - * [CHRP] unused. - * [Macintosh Family] "Floppy disk - * state-control line SEL" on all but IIfx - */ -#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx - * this bit enables the "Overlay" address - * map in the address decoders as it is on - * reset for mapping the ROM over the reset - * vector. 1=use overlay map. - * On the IIci,IIfx it is another bit of the - * CPU ID: 0=normal IIci, 1=IIci with parity - * feature or IIfx. - * [CHRP] En WaitReqA: Lets the WaitReq_L - * signal from port A of the SCC appear - * on the PA7 input pin (CHRP). Output. - * [MkLinux] "Drive Select" - * (with 0x20 being 'disk head select') - */ -#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select: - * 1: select the external serial clock to - * drive the SCC's /RTxCA pin. - * 0: Select the 3.6864MHz clock to drive - * the SCC cell. - * [Macintosh Family] Correct on all but IIfx - */ - -/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control - * on Macs which had the PWM sound hardware. Reserved on newer models. - * On IIci,IIfx, bits 1-2 are the rest of the CPU ID: - * bit 2: 1=IIci, 0=IIfx - * bit 1: 1 on both IIci and IIfx. - * MkLinux sez bit 0 is 'burnin flag' in this case. - * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as - * inputs, these bits will read 0. - */ -#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */ -#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */ - -/* Info on VIA1B is from Macintosh Family Hardware & MkLinux. - * CHRP offers no info. */ -#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with - * PWM hardware) 0=enabled. - * Also, on IIci w/parity, shows parity error - * 0=error, 1=OK. */ -#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled - * On SE/30, vertical sync interrupt enable. - * 0=enabled. This vSync interrupt shows up - * as a slot $E interrupt. */ -#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */ -#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */ -#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/ -#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */ -#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */ -#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */ - -/* MkLinux defines the following "VIA1 Register B contents where they - * differ from standard VIA1". From the naming scheme, we assume they - * correspond to a VIA work-alike named 'EVR'. */ -#define EVRB_XCVR 0x08 /* XCVR_SESSION* */ -#define EVRB_FULL 0x10 /* VIA_FULL */ -#define EVRB_SYSES 0x20 /* SYS_SESSION */ -#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */ -#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */ -#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */ -#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */ - -/* - * VIA2 A register is the interrupt lines raised off the nubus - * slots. - * The below info is from 'Macintosh Family Hardware.' - * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.' - * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and - * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike. - * Perhaps OSS uses vRAM1 and vRAM2 for ADB. - */ - -#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */ -#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */ -#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */ -#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */ -#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */ -#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */ -#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */ -#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */ - -/* RAM size bits decoded as follows: - * bit1 bit0 size of ICs in bank A - * 0 0 256 kbit - * 0 1 1 Mbit - * 1 0 4 Mbit - * 1 1 16 Mbit - */ - -/* - * Register B has the fun stuff in it - */ - -#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by - * timer T1. - * on IIci, parity test: 0=test mode. - * [MkLinux] RBV_PARODD: 1=odd,0=even. */ -#define VIA2B_vSndJck 0x40 /* External sound jack status. - * 0=plug is inserted. On SE/30, always 0 */ -#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */ -#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */ -#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush - * on II, AMU/PMMU control. - * if AMU, 0=24bit to 32bit translation - * if PMMU, 1=PMMU is accessing page table. - * on SE/30 tied low. - * on IIx,IIcx,IIfx, unused. - * on IIci/RBV, cache control. 0=flush cache. - */ -#define VIA2B_vPower 0x04 /* Power off, 0=shut off power. - * on SE/30 this signal sent to PDS card. */ -#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked. - * on SE/30 sent to PDS card. */ -#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card - * on others, 0=disable processor's instruction - * and data caches. */ - -/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html - * Another example of a valid function that has no ROM support is the use - * of the alternate video page for page-flipping animation. Since there - * is no ROM call to flip pages, it is necessary to go play with the - * right bit in the VIA chip (6522 Versatile Interface Adapter). - * [CSA: don't know which one this is, but it's one of 'em!] - */ - -/* - * 6522 registers - see databook. - * CSA: Assignments for VIA1 confirmed from CHRP spec. - */ - -/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */ -/* Note: 15 VIA regs, 8 RBV regs */ - -#define vBufB 0x0000 /* [VIA/RBV] Register B */ -#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */ -#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */ -#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */ -#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */ -#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */ -#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */ -#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */ -#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ -#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ -#define vSR 0x1400 /* [VIA only] Shift register. */ -#define vACR 0x1600 /* [VIA only] Auxilary control register. */ -#define vPCR 0x1800 /* [VIA only] Peripheral control register. */ - /* CHRP sez never ever to *write* this. - * Mac family says never to *change* this. - * In fact we need to initialize it once at start. */ -#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */ -#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */ -#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */ - -/* The RBV only decodes the bottom eight address lines; the VIA doesn't - * decode the bottom eight -- so vBufB | rBufB will always get you BufB */ -/* CSA: in fact, only bits 0,1, and 4 seem to be decoded. - * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem - * to matter. In fact *all* of the top 8 bits seem to matter; - * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either. - * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999] - */ - -#define rBufB 0x0000 /* [VIA/RBV] Register B */ -#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */ -#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */ -#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */ -#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */ -#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */ -#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */ -#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */ -#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */ - -/* - * Video monitor parameters, for rMonP: - */ -#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */ -#define RBV_MONID 0x38 /* monitor type, as below. */ -#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */ -/* Supported monitor types: */ -#define MON_15BW (1<<3) /* 15" BW portrait. */ -#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */ -#define MON_15RGB (5<<3) /* 15" RGB portrait. */ -#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */ -#define MON_NONE (7<<3) /* No monitor attached. */ - -/* To clarify IER manipulations */ -#define IER_SET_BIT(b) (0x80 | (1<<(b)) ) -#define IER_CLR_BIT(b) (0x7F & (1<<(b)) ) - -#ifndef __ASSEMBLY__ - -extern volatile __u8 *via1,*via2; -extern int rbv_present,via_alt_mapping; - -static inline int rbv_set_video_bpp(int bpp) -{ - char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1; - if (!rbv_present || val<0) return -1; - via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val; - return 0; -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_MAC_VIA_H_ */ diff --git a/include/asm-m68k/machdep.h b/include/asm-m68k/machdep.h deleted file mode 100644 index 5637dce..0000000 --- a/include/asm-m68k/machdep.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _M68K_MACHDEP_H -#define _M68K_MACHDEP_H - -#include -#include - -struct pt_regs; -struct mktime; -struct rtc_time; -struct rtc_pll_info; -struct buffer_head; - -extern void (*mach_sched_init) (irq_handler_t handler); -/* machine dependent irq functions */ -extern void (*mach_init_IRQ) (void); -extern void (*mach_get_model) (char *model); -extern void (*mach_get_hardware_list) (struct seq_file *m); -/* machine dependent timer functions */ -extern unsigned long (*mach_gettimeoffset)(void); -extern int (*mach_hwclk)(int, struct rtc_time*); -extern unsigned int (*mach_get_ss)(void); -extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); -extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); -extern int (*mach_set_clock_mmss)(unsigned long); -extern void (*mach_reset)( void ); -extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); -extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); -extern void (*mach_hd_setup)(char *, int *); -extern long mach_max_dma_address; -extern void (*mach_heartbeat) (int); -extern void (*mach_l2_flush) (int); -extern void (*mach_beep) (unsigned int, unsigned int); - -#endif /* _M68K_MACHDEP_H */ diff --git a/include/asm-m68k/machines.h b/include/asm-m68k/machines.h deleted file mode 100644 index be667e8..0000000 --- a/include/asm-m68k/machines.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * machines.h: Defines for taking apart the machine type value in the - * idprom and determining the kind of machine we are on. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au) - */ -#ifndef _SPARC_MACHINES_H -#define _SPARC_MACHINES_H - -struct Sun_Machine_Models { - char *name; - unsigned char id_machtype; -}; - -/* Current number of machines we know about that has an IDPROM - * machtype entry including one entry for the 0x80 OBP machines. - */ -// reduced along with table in arch/m68k/sun3/idprom.c -// sun3 port doesn't need to know about sparc machines. -//#define NUM_SUN_MACHINES 23 -#define NUM_SUN_MACHINES 8 - -/* The machine type in the idprom area looks like this: - * - * --------------- - * | ARCH | MACH | - * --------------- - * 7 4 3 0 - * - * The ARCH field determines the architecture line (sun4, sun4c, etc). - * The MACH field determines the machine make within that architecture. - */ - -#define SM_ARCH_MASK 0xf0 -#define SM_SUN3 0x10 -#define SM_SUN4 0x20 -#define SM_SUN3X 0x40 -#define SM_SUN4C 0x50 -#define SM_SUN4M 0x70 -#define SM_SUN4M_OBP 0x80 - -#define SM_TYP_MASK 0x0f -/* Sun3 machines */ -#define SM_3_160 0x01 /* Sun 3/160 series */ -#define SM_3_50 0x02 /* Sun 3/50 series */ -#define SM_3_260 0x03 /* Sun 3/260 series */ -#define SM_3_110 0x04 /* Sun 3/110 series */ -#define SM_3_60 0x07 /* Sun 3/60 series */ -#define SM_3_E 0x08 /* Sun 3/E series */ - -/* Sun3x machines */ -#define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */ -#define SM_3_80 0x02 /* Sun 3/80 series */ - -/* Sun4 machines */ -#define SM_4_260 0x01 /* Sun 4/200 series */ -#define SM_4_110 0x02 /* Sun 4/100 series */ -#define SM_4_330 0x03 /* Sun 4/300 series */ -#define SM_4_470 0x04 /* Sun 4/400 series */ - -/* Sun4c machines Full Name - PROM NAME */ -#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ -#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ -#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ -#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ -#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ -#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ -#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ - -/* Sun4m machines, these predate the OpenBoot. These values only mean - * something if the value in the ARCH field is SM_SUN4M, if it is - * SM_SUN4M_OBP then you have the following situation: - * 1) You either have a sun4d, a sun4e, or a recently made sun4m. - * 2) You have to consult OpenBoot to determine which machine this is. - */ -#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ -#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ -#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ - -/* Sun4d machines -- N/A */ -/* Sun4e machines -- N/A */ -/* Sun4u machines -- N/A */ - -#endif /* !(_SPARC_MACHINES_H) */ diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h deleted file mode 100644 index 2b4de0c..0000000 --- a/include/asm-m68k/machw.h +++ /dev/null @@ -1,49 +0,0 @@ -/* -** linux/machw.h -- This header defines some macros and pointers for -** the various Macintosh custom hardware registers. -** -** Copyright 1997 by Michael Schmitz -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _ASM_MACHW_H_ -#define _ASM_MACHW_H_ - -/* - * head.S maps the videomem to VIDEOMEMBASE - */ - -#define VIDEOMEMBASE 0xf0000000 -#define VIDEOMEMSIZE (4096*1024) -#define VIDEOMEMMASK (-4096*1024) - -#ifndef __ASSEMBLY__ - -#include - -#if 0 -/* -** SCC Z8530 -*/ - -#define MAC_SCC_BAS (0x50F04000) -struct MAC_SCC - { - u_char cha_a_ctrl; - u_char char_dummy1; - u_char cha_a_data; - u_char char_dummy2; - u_char cha_b_ctrl; - u_char char_dummy3; - u_char cha_b_data; - }; -# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS)) -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* linux/machw.h */ diff --git a/include/asm-m68k/macintosh.h b/include/asm-m68k/macintosh.h deleted file mode 100644 index 05309f7..0000000 --- a/include/asm-m68k/macintosh.h +++ /dev/null @@ -1,135 +0,0 @@ -#ifndef __ASM_MACINTOSH_H -#define __ASM_MACINTOSH_H - -#include -#include - -/* - * Apple Macintoshisms - */ - -extern void mac_reset(void); -extern void mac_poweroff(void); -extern void mac_init_IRQ(void); -extern int mac_irq_pending(unsigned int); - -/* - * Floppy driver magic hook - probably shouldnt be here - */ - -extern void via1_set_head(int); - -/* - * Macintosh Table - */ - -struct mac_model -{ - short ident; - char *name; - char adb_type; - char via_type; - char scsi_type; - char ide_type; - char scc_type; - char ether_type; - char nubus_type; -}; - -#define MAC_ADB_NONE 0 -#define MAC_ADB_II 1 -#define MAC_ADB_IISI 2 -#define MAC_ADB_CUDA 3 -#define MAC_ADB_PB1 4 -#define MAC_ADB_PB2 5 -#define MAC_ADB_IOP 6 - -#define MAC_VIA_II 1 -#define MAC_VIA_IIci 2 -#define MAC_VIA_QUADRA 3 - -#define MAC_SCSI_NONE 0 -#define MAC_SCSI_OLD 1 -#define MAC_SCSI_QUADRA 2 -#define MAC_SCSI_QUADRA2 3 -#define MAC_SCSI_QUADRA3 4 - -#define MAC_IDE_NONE 0 -#define MAC_IDE_QUADRA 1 -#define MAC_IDE_PB 2 -#define MAC_IDE_BABOON 3 - -#define MAC_SCC_II 1 -#define MAC_SCC_IOP 2 -#define MAC_SCC_QUADRA 3 -#define MAC_SCC_PSC 4 - -#define MAC_ETHER_NONE 0 -#define MAC_ETHER_SONIC 1 -#define MAC_ETHER_MACE 2 - -#define MAC_NO_NUBUS 0 -#define MAC_NUBUS 1 - -/* - * Gestalt numbers - */ - -#define MAC_MODEL_II 6 -#define MAC_MODEL_IIX 7 -#define MAC_MODEL_IICX 8 -#define MAC_MODEL_SE30 9 -#define MAC_MODEL_IICI 11 -#define MAC_MODEL_IIFX 13 /* And well numbered it is too */ -#define MAC_MODEL_IISI 18 -#define MAC_MODEL_LC 19 -#define MAC_MODEL_Q900 20 -#define MAC_MODEL_PB170 21 -#define MAC_MODEL_Q700 22 -#define MAC_MODEL_CLII 23 /* aka: P200 */ -#define MAC_MODEL_PB140 25 -#define MAC_MODEL_Q950 26 /* aka: WGS95 */ -#define MAC_MODEL_LCIII 27 /* aka: P450 */ -#define MAC_MODEL_PB210 29 -#define MAC_MODEL_C650 30 -#define MAC_MODEL_PB230 32 -#define MAC_MODEL_PB180 33 -#define MAC_MODEL_PB160 34 -#define MAC_MODEL_Q800 35 /* aka: WGS80 */ -#define MAC_MODEL_Q650 36 -#define MAC_MODEL_LCII 37 /* aka: P400/405/410/430 */ -#define MAC_MODEL_PB250 38 -#define MAC_MODEL_IIVI 44 -#define MAC_MODEL_P600 45 /* aka: P600CD */ -#define MAC_MODEL_IIVX 48 -#define MAC_MODEL_CCL 49 /* aka: P250 */ -#define MAC_MODEL_PB165C 50 -#define MAC_MODEL_C610 52 /* aka: WGS60 */ -#define MAC_MODEL_Q610 53 -#define MAC_MODEL_PB145 54 /* aka: PB145B */ -#define MAC_MODEL_P520 56 /* aka: LC520 */ -#define MAC_MODEL_C660 60 -#define MAC_MODEL_P460 62 /* aka: LCIII+, P466/P467 */ -#define MAC_MODEL_PB180C 71 -#define MAC_MODEL_PB520 72 /* aka: PB520C, PB540, PB540C, PB550C */ -#define MAC_MODEL_PB270C 77 -#define MAC_MODEL_Q840 78 -#define MAC_MODEL_P550 80 /* aka: LC550, P560 */ -#define MAC_MODEL_CCLII 83 /* aka: P275 */ -#define MAC_MODEL_PB165 84 -#define MAC_MODEL_PB190 85 /* aka: PB190CS */ -#define MAC_MODEL_TV 88 -#define MAC_MODEL_P475 89 /* aka: LC475, P476 */ -#define MAC_MODEL_P475F 90 /* aka: P475 w/ FPU (no LC040) */ -#define MAC_MODEL_P575 92 /* aka: LC575, P577/P578 */ -#define MAC_MODEL_Q605 94 -#define MAC_MODEL_Q605_ACC 95 /* Q605 accelerated to 33 MHz */ -#define MAC_MODEL_Q630 98 /* aka: LC630, P630/631/635/636/637/638/640 */ -#define MAC_MODEL_P588 99 /* aka: LC580, P580 */ -#define MAC_MODEL_PB280 102 -#define MAC_MODEL_PB280C 103 -#define MAC_MODEL_PB150 115 - -extern struct mac_model *macintosh_config; - -#endif diff --git a/include/asm-m68k/macints.h b/include/asm-m68k/macints.h deleted file mode 100644 index 679c48a..0000000 --- a/include/asm-m68k/macints.h +++ /dev/null @@ -1,155 +0,0 @@ -/* -** macints.h -- Macintosh Linux interrupt handling structs and prototypes -** -** Copyright 1997 by Michael Schmitz -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _ASM_MACINTS_H_ -#define _ASM_MACINTS_H_ - -#include - -/* Setting this prints debugging info for unclaimed interrupts */ - -#define DEBUG_SPURIOUS - -/* Setting this prints debugging info on each autovector interrupt */ - -/* #define DEBUG_IRQS */ - -/* Setting this prints debugging info on each Nubus interrupt */ - -/* #define DEBUG_NUBUS_INT */ - -/* Setting this prints debugging info on irqs as they enabled and disabled. */ - -/* #define DEBUG_IRQUSE */ - -/* - * Base IRQ number for all Mac68K interrupt sources. Each source - * has eight indexes (base -> base+7). - */ - -#define VIA1_SOURCE_BASE 8 -#define VIA2_SOURCE_BASE 16 -#define MAC_SCC_SOURCE_BASE 24 -#define PSC3_SOURCE_BASE 24 -#define PSC4_SOURCE_BASE 32 -#define PSC5_SOURCE_BASE 40 -#define PSC6_SOURCE_BASE 48 -#define NUBUS_SOURCE_BASE 56 -#define BABOON_SOURCE_BASE 64 - -/* - * Maximum IRQ number is BABOON_SOURCE_BASE + 7, - * giving us IRQs up through 71 - */ - -#define NUM_MAC_SOURCES 72 - -/* - * clean way to separate IRQ into its source and index - */ - -#define IRQ_SRC(irq) (irq >> 3) -#define IRQ_IDX(irq) (irq & 7) - -/* VIA1 interrupts */ -#define IRQ_VIA1_0 (8) /* one second int. */ -#define IRQ_VIA1_1 (9) /* VBlank int. */ -#define IRQ_MAC_VBL IRQ_VIA1_1 -#define IRQ_VIA1_2 (10) /* ADB SR shifts complete */ -#define IRQ_MAC_ADB IRQ_VIA1_2 -#define IRQ_MAC_ADB_SR IRQ_VIA1_2 -#define IRQ_VIA1_3 (11) /* ADB SR CB2 ?? */ -#define IRQ_MAC_ADB_SD IRQ_VIA1_3 -#define IRQ_VIA1_4 (12) /* ADB SR ext. clock pulse */ -#define IRQ_MAC_ADB_CL IRQ_VIA1_4 -#define IRQ_VIA1_5 (13) -#define IRQ_MAC_TIMER_2 IRQ_VIA1_5 -#define IRQ_VIA1_6 (14) -#define IRQ_MAC_TIMER_1 IRQ_VIA1_6 -#define IRQ_VIA1_7 (15) - -/* VIA2/RBV interrupts */ -#define IRQ_VIA2_0 (16) -#define IRQ_MAC_SCSIDRQ IRQ_VIA2_0 -#define IRQ_VIA2_1 (17) -#define IRQ_MAC_NUBUS IRQ_VIA2_1 -#define IRQ_VIA2_2 (18) -#define IRQ_VIA2_3 (19) -#define IRQ_MAC_SCSI IRQ_VIA2_3 -#define IRQ_VIA2_4 (20) -#define IRQ_VIA2_5 (21) -#define IRQ_VIA2_6 (22) -#define IRQ_VIA2_7 (23) - -/* Level 3 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC3_0 (24) -#define IRQ_MAC_MACE IRQ_PSC3_0 -#define IRQ_PSC3_1 (25) -#define IRQ_PSC3_2 (26) -#define IRQ_PSC3_3 (27) - -/* Level 4 (SCC) interrupts */ -#define IRQ_SCC (32) -#define IRQ_SCCA (33) -#define IRQ_SCCB (34) -#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */ -/* SCC interrupts */ -#define IRQ_SCCB_TX (32) -#define IRQ_SCCB_STAT (33) -#define IRQ_SCCB_RX (34) -#define IRQ_SCCB_SPCOND (35) -#define IRQ_SCCA_TX (36) -#define IRQ_SCCA_STAT (37) -#define IRQ_SCCA_RX (38) -#define IRQ_SCCA_SPCOND (39) -#endif - -/* Level 4 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC4_0 (32) -#define IRQ_PSC4_1 (33) -#define IRQ_PSC4_2 (34) -#define IRQ_PSC4_3 (35) -#define IRQ_MAC_MACE_DMA IRQ_PSC4_3 - -/* Level 5 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC5_0 (40) -#define IRQ_PSC5_1 (41) -#define IRQ_PSC5_2 (42) -#define IRQ_PSC5_3 (43) - -/* Level 6 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC6_0 (48) -#define IRQ_PSC6_1 (49) -#define IRQ_PSC6_2 (50) -#define IRQ_PSC6_3 (51) - -/* Nubus interrupts (cascaded to VIA2) */ -#define IRQ_NUBUS_9 (56) -#define IRQ_NUBUS_A (57) -#define IRQ_NUBUS_B (58) -#define IRQ_NUBUS_C (59) -#define IRQ_NUBUS_D (60) -#define IRQ_NUBUS_E (61) -#define IRQ_NUBUS_F (62) - -/* Baboon interrupts (cascaded to nubus slot $C) */ -#define IRQ_BABOON_0 (64) -#define IRQ_BABOON_1 (65) -#define IRQ_BABOON_2 (66) -#define IRQ_BABOON_3 (67) - -#define SLOT2IRQ(x) (x + 47) -#define IRQ2SLOT(x) (x - 47) - -#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ -#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ - -#endif /* asm/macints.h */ diff --git a/include/asm-m68k/math-emu.h b/include/asm-m68k/math-emu.h deleted file mode 100644 index ddfab96..0000000 --- a/include/asm-m68k/math-emu.h +++ /dev/null @@ -1,315 +0,0 @@ -#ifndef _ASM_M68K_SETUP_H -#define _ASM_M68K_SETUP_H - -#include -#include - -/* Status Register bits */ - -/* accrued exception bits */ -#define FPSR_AEXC_INEX 3 -#define FPSR_AEXC_DZ 4 -#define FPSR_AEXC_UNFL 5 -#define FPSR_AEXC_OVFL 6 -#define FPSR_AEXC_IOP 7 - -/* exception status bits */ -#define FPSR_EXC_INEX1 8 -#define FPSR_EXC_INEX2 9 -#define FPSR_EXC_DZ 10 -#define FPSR_EXC_UNFL 11 -#define FPSR_EXC_OVFL 12 -#define FPSR_EXC_OPERR 13 -#define FPSR_EXC_SNAN 14 -#define FPSR_EXC_BSUN 15 - -/* quotient byte, assumes big-endian, of course */ -#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) - -/* condition code bits */ -#define FPSR_CC_NAN 24 -#define FPSR_CC_INF 25 -#define FPSR_CC_Z 26 -#define FPSR_CC_NEG 27 - - -/* Control register bits */ - -/* rounding mode */ -#define FPCR_ROUND_RN 0 /* round to nearest/even */ -#define FPCR_ROUND_RZ 1 /* round to zero */ -#define FPCR_ROUND_RM 2 /* minus infinity */ -#define FPCR_ROUND_RP 3 /* plus infinity */ - -/* rounding precision */ -#define FPCR_PRECISION_X 0 /* long double */ -#define FPCR_PRECISION_S 1 /* double */ -#define FPCR_PRECISION_D 2 /* float */ - - -/* Flags to select the debugging output */ -#define PDECODE 0 -#define PEXECUTE 1 -#define PCONV 2 -#define PNORM 3 -#define PREGISTER 4 -#define PINSTR 5 -#define PUNIMPL 6 -#define PMOVEM 7 - -#define PMDECODE (1< -#include - -union fp_mant64 { - unsigned long long m64; - unsigned long m32[2]; -}; - -union fp_mant128 { - unsigned long long m64[2]; - unsigned long m32[4]; -}; - -/* internal representation of extended fp numbers */ -struct fp_ext { - unsigned char lowmant; - unsigned char sign; - unsigned short exp; - union fp_mant64 mant; -}; - -/* C representation of FPU registers */ -/* NOTE: if you change this, you have to change the assembler offsets - below and the size in , too */ -struct fp_data { - struct fp_ext fpreg[8]; - unsigned int fpcr; - unsigned int fpsr; - unsigned int fpiar; - unsigned short prec; - unsigned short rnd; - struct fp_ext temp[2]; -}; - -#ifdef FPU_EMU_DEBUG -extern unsigned int fp_debugprint; - -#define dprint(bit, fmt, args...) ({ \ - if (fp_debugprint & (1 << (bit))) \ - printk(fmt, ## args); \ -}) -#else -#define dprint(bit, fmt, args...) -#endif - -#define uprint(str) ({ \ - static int __count = 3; \ - \ - if (__count > 0) { \ - printk("You just hit an unimplemented " \ - "fpu instruction (%s)\n", str); \ - printk("Please report this to ....\n"); \ - __count--; \ - } \ -}) - -#define FPDATA ((struct fp_data *)current->thread.fp) - -#else /* __ASSEMBLY__ */ - -#define FPDATA %a2 - -/* offsets from the base register to the floating point data in the task struct */ -#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) -#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) -#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) -#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) -#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) -#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) -#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) -#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) -#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) - -/* offsets on the stack to access saved registers, - * these are only used during instruction decoding - * where we always know how deep we're on the stack. - */ -#define FPS_DO (PT_D0) -#define FPS_D1 (PT_D1) -#define FPS_D2 (PT_D2) -#define FPS_A0 (PT_A0) -#define FPS_A1 (PT_A1) -#define FPS_A2 (PT_A2) -#define FPS_SR (PT_SR) -#define FPS_PC (PT_PC) -#define FPS_EA (PT_PC+6) -#define FPS_PC2 (PT_PC+10) - -.macro fp_get_fp_reg - lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 - lea (%a0,%d0.w*8),%a0 -.endm - -/* Macros used to get/put the current program counter. - * 020/030 use a different stack frame then 040/060, for the - * 040/060 the return pc points already to the next location, - * so this only needs to be modified for jump instructions. - */ -.macro fp_get_pc dest - move.l (FPS_PC+4,%sp),\dest -.endm - -.macro fp_put_pc src,jump=0 - move.l \src,(FPS_PC+4,%sp) -.endm - -.macro fp_get_instr_data f,s,dest,label - getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) - addq.l #\s,%sp@(FPS_PC+4) -.endm - -.macro fp_get_instr_word dest,label,addr - fp_get_instr_data w,2,\dest,\label,\addr -.endm - -.macro fp_get_instr_long dest,label,addr - fp_get_instr_data l,4,\dest,\label,\addr -.endm - -/* These macros are used to read from/write to user space - * on error we jump to the fixup section, load the fault - * address into %a0 and jump to the exit. - * (derived from ) - */ -.macro getuser size,src,dest,label,addr -| printf ,"[\size<%08x]",1,\addr -.Lu1\@: moves\size \src,\dest - - .section .fixup,"ax" - .even -.Lu2\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu2\@ - .previous -.endm - -.macro putuser size,src,dest,label,addr -| printf ,"[\size>%08x]",1,\addr -.Lu1\@: moves\size \src,\dest -.Lu2\@: - - .section .fixup,"ax" - .even -.Lu3\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu3\@ - .long .Lu2\@,.Lu3\@ - .previous -.endm - -/* work around binutils idiocy */ -old_gas=-1 -.irp gas_ident.x .x -old_gas=old_gas+1 -.endr -.if !old_gas -.irp m b,w,l -.macro getuser.\m src,dest,label,addr - getuser .\m,\src,\dest,\label,\addr -.endm -.macro putuser.\m src,dest,label,addr - putuser .\m,\src,\dest,\label,\addr -.endm -.endr -.endif - -.macro movestack nr,arg1,arg2,arg3,arg4,arg5 - .if \nr - movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 - move.l \arg1,-(%sp) - .endif -.endm - -.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 -#ifdef FPU_EMU_DEBUG - .data -.Lpdata\@: - .string "\string" - .previous - - movem.l %d0/%d1/%a0/%a1,-(%sp) - .if \bit+1 -#if 0 - moveq #\bit,%d0 - andw #7,%d0 - btst %d0,fp_debugprint+((31-\bit)/8) -#else - btst #\bit,fp_debugprint+((31-\bit)/8) -#endif - jeq .Lpskip\@ - .endif - movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 - pea .Lpdata\@ - jsr printk - lea ((\nr+1)*4,%sp),%sp -.Lpskip\@: - movem.l (%sp)+,%d0/%d1/%a0/%a1 -#endif -.endm - -.macro printx bit,fp -#ifdef FPU_EMU_DEBUG - movem.l %d0/%a0,-(%sp) - lea \fp,%a0 -#if 0 - moveq #'+',%d0 - tst.w (%a0) - jeq .Lx1\@ - moveq #'-',%d0 -.Lx1\@: printf \bit," %c",1,%d0 - move.l (4,%a0),%d0 - bclr #31,%d0 - jne .Lx2\@ - printf \bit,"0." - jra .Lx3\@ -.Lx2\@: printf \bit,"1." -.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) - move.w (2,%a0),%d0 - ext.l %d0 - printf \bit,"E%04x",1,%d0 -#else - printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) -#endif - movem.l (%sp)+,%d0/%a0 -#endif -.endm - -.macro debug instr,args -#ifdef FPU_EMU_DEBUG - \instr \args -#endif -.endm - - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_M68K_SETUP_H */ diff --git a/include/asm-m68k/mc146818rtc.h b/include/asm-m68k/mc146818rtc.h deleted file mode 100644 index 9f70a01..0000000 --- a/include/asm-m68k/mc146818rtc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - - -#ifdef CONFIG_ATARI -/* RTC in Atari machines */ - -#include - -#define RTC_PORT(x) (TT_RTC_BAS + 2*(x)) -#define RTC_ALWAYS_BCD 0 - -#define CMOS_READ(addr) ({ \ -atari_outb_p((addr),RTC_PORT(0)); \ -atari_inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -atari_outb_p((addr),RTC_PORT(0)); \ -atari_outb_p((val),RTC_PORT(1)); \ -}) -#endif /* CONFIG_ATARI */ - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-m68k/md.h b/include/asm-m68k/md.h deleted file mode 100644 index d2f78f2..0000000 --- a/include/asm-m68k/md.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * md.h: High speed xor_block operation for RAID4/5 - * - */ - -#ifndef __ASM_MD_H -#define __ASM_MD_H - -/* #define HAVE_ARCH_XORBLOCK */ - -#define MD_XORBLOCK_ALIGNMENT sizeof(long) - -#endif /* __ASM_MD_H */ diff --git a/include/asm-m68k/mman.h b/include/asm-m68k/mman.h deleted file mode 100644 index 1626d37..0000000 --- a/include/asm-m68k/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __M68K_MMAN_H__ -#define __M68K_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __M68K_MMAN_H__ */ diff --git a/include/asm-m68k/mmu.h b/include/asm-m68k/mmu.h deleted file mode 100644 index ccd36d2..0000000 --- a/include/asm-m68k/mmu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#endif diff --git a/include/asm-m68k/mmu_context.h b/include/asm-m68k/mmu_context.h deleted file mode 100644 index 894dacb..0000000 --- a/include/asm-m68k/mmu_context.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __M68K_MMU_CONTEXT_H -#define __M68K_MMU_CONTEXT_H - -#include - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifndef CONFIG_SUN3 - -#include -#include -#include - -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - mm->context = virt_to_phys(mm->pgd); - return 0; -} - -#define destroy_context(mm) do { } while(0) - -static inline void switch_mm_0230(struct mm_struct *mm) -{ - unsigned long crp[2] = { - 0x80000000 | _PAGE_TABLE, mm->context - }; - unsigned long tmp; - - asm volatile (".chip 68030"); - - /* flush MC68030/MC68020 caches (they are virtually addressed) */ - asm volatile ( - "movec %%cacr,%0;" - "orw %1,%0; " - "movec %0,%%cacr" - : "=d" (tmp) : "di" (FLUSH_I_AND_D)); - - /* Switch the root pointer. For a 030-only kernel, - * avoid flushing the whole ATC, we only need to - * flush the user entries. The 68851 does this by - * itself. Avoid a runtime check here. - */ - asm volatile ( -#ifdef CPU_M68030_ONLY - "pmovefd %0,%%crp; " - "pflush #0,#4" -#else - "pmove %0,%%crp" -#endif - : : "m" (crp[0])); - - asm volatile (".chip 68k"); -} - -static inline void switch_mm_0460(struct mm_struct *mm) -{ - asm volatile (".chip 68040"); - - /* flush address translation cache (user entries) */ - asm volatile ("pflushan"); - - /* switch the root pointer */ - asm volatile ("movec %0,%%urp" : : "r" (mm->context)); - - if (CPU_IS_060) { - unsigned long tmp; - - /* clear user entries in the branch cache */ - asm volatile ( - "movec %%cacr,%0; " - "orl %1,%0; " - "movec %0,%%cacr" - : "=d" (tmp): "di" (0x00200000)); - } - - asm volatile (".chip 68k"); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ - if (prev != next) { - if (CPU_IS_020_OR_030) - switch_mm_0230(next); - else - switch_mm_0460(next); - } -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - next_mm->context = virt_to_phys(next_mm->pgd); - - if (CPU_IS_020_OR_030) - switch_mm_0230(next_mm); - else - switch_mm_0460(next_mm); -} - -#else /* CONFIG_SUN3 */ -#include -#include - -extern unsigned long get_free_context(struct mm_struct *mm); -extern void clear_context(unsigned long context); - -/* set the context for a new task to unmapped */ -static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - mm->context = SUN3_INVALID_CONTEXT; - return 0; -} - -/* find the context given to this process, and if it hasn't already - got one, go get one for it. */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - if(mm->context == SUN3_INVALID_CONTEXT) - mm->context = get_free_context(mm); -} - -/* flush context if allocated... */ -static inline void destroy_context(struct mm_struct *mm) -{ - if(mm->context != SUN3_INVALID_CONTEXT) - clear_context(mm->context); -} - -static inline void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - sun3_put_context(mm->context); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ - activate_context(tsk->mm); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - activate_context(next_mm); -} - -#endif -#endif diff --git a/include/asm-m68k/mmzone.h b/include/asm-m68k/mmzone.h deleted file mode 100644 index e1f1ec7..0000000 --- a/include/asm-m68k/mmzone.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_M68K_MMZONE_H_ -#define _ASM_M68K_MMZONE_H_ - -extern pg_data_t pg_data_map[]; - -#define NODE_DATA(nid) (&pg_data_map[nid]) -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#endif /* _ASM_M68K_MMZONE_H_ */ diff --git a/include/asm-m68k/module.h b/include/asm-m68k/module.h deleted file mode 100644 index 382d20a..0000000 --- a/include/asm-m68k/module.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_M68K_MODULE_H -#define _ASM_M68K_MODULE_H - -struct mod_arch_specific { - struct m68k_fixup_info *fixup_start, *fixup_end; -}; - -#define MODULE_ARCH_INIT { \ - .fixup_start = __start_fixup, \ - .fixup_end = __stop_fixup, \ -} - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - - -enum m68k_fixup_type { - m68k_fixup_memoffset, - m68k_fixup_vnode_shift, -}; - -struct m68k_fixup_info { - enum m68k_fixup_type type; - void *addr; -}; - -#define m68k_fixup(type, addr) \ - " .section \".m68k_fixup\",\"aw\"\n" \ - " .long " #type "," #addr "\n" \ - " .previous\n" - -extern struct m68k_fixup_info __start_fixup[], __stop_fixup[]; - -struct module; -extern void module_fixup(struct module *mod, struct m68k_fixup_info *start, - struct m68k_fixup_info *end); - -#endif /* _ASM_M68K_MODULE_H */ diff --git a/include/asm-m68k/motorola_pgalloc.h b/include/asm-m68k/motorola_pgalloc.h deleted file mode 100644 index d08bf62..0000000 --- a/include/asm-m68k/motorola_pgalloc.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef _MOTOROLA_PGALLOC_H -#define _MOTOROLA_PGALLOC_H - -#include -#include - -extern pmd_t *get_pointer_table(void); -extern int free_pointer_table(pmd_t *); - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte; - - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - - return pte; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - cache_page(pte); - free_page((unsigned long) pte); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - pte_t *pte; - - if(!page) - return NULL; - - pte = kmap(page); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - kunmap(pte); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t page) -{ - pgtable_page_dtor(page); - cache_page(kmap(page)); - kunmap(page); - __free_page(page); -} - -static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page) -{ - pgtable_page_dtor(page); - cache_page(kmap(page)); - kunmap(page); - __free_page(page); -} - - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) -{ - return get_pointer_table(); -} - -static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - return free_pointer_table(pmd); -} - -static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) -{ - return free_pointer_table(pmd); -} - - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - pmd_free(mm, (pmd_t *)pgd); -} - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return (pgd_t *)get_pointer_table(); -} - - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) -{ - pmd_set(pmd, pte); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) -{ - pmd_set(pmd, page_address(page)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) -{ - pgd_set(pgd, pmd); -} - -#endif /* _MOTOROLA_PGALLOC_H */ diff --git a/include/asm-m68k/motorola_pgtable.h b/include/asm-m68k/motorola_pgtable.h deleted file mode 100644 index 8e9a8a7..0000000 --- a/include/asm-m68k/motorola_pgtable.h +++ /dev/null @@ -1,291 +0,0 @@ -#ifndef _MOTOROLA_PGTABLE_H -#define _MOTOROLA_PGTABLE_H - - -/* - * Definitions for MMU descriptors - */ -#define _PAGE_PRESENT 0x001 -#define _PAGE_SHORT 0x002 -#define _PAGE_RONLY 0x004 -#define _PAGE_ACCESSED 0x008 -#define _PAGE_DIRTY 0x010 -#define _PAGE_SUPER 0x080 /* 68040 supervisor only */ -#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ -#define _PAGE_NOCACHE030 0x040 /* 68030 no-cache mode */ -#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ -#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ -#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ -#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ - -#define _DESCTYPE_MASK 0x003 - -#define _CACHEMASK040 (~0x060) -#define _TABLE_MASK (0xfffffe00) - -#define _PAGE_TABLE (_PAGE_SHORT) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE) - -#define _PAGE_PROTNONE 0x004 -#define _PAGE_FILE 0x008 /* pagecache or swap? */ - -#ifndef __ASSEMBLY__ - -/* This is the cache mode to be used for pages containing page descriptors for - * processors >= '040. It is in pte_mknocache(), and the variable is defined - * and initialized in head.S */ -extern int m68k_pgtable_cachemode; - -/* This is the cache mode for normal pages, for supervisor access on - * processors >= '040. It is used in pte_mkcache(), and the variable is - * defined and initialized in head.S */ - -#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH) -#define m68k_supervisor_cachemode _PAGE_CACHE040W -#elif defined(CPU_M68040_OR_M68060_ONLY) -#define m68k_supervisor_cachemode _PAGE_CACHE040 -#elif defined(CPU_M68020_OR_M68030_ONLY) -#define m68k_supervisor_cachemode 0 -#else -extern int m68k_supervisor_cachemode; -#endif - -#if defined(CPU_M68040_OR_M68060_ONLY) -#define mm_cachebits _PAGE_CACHE040 -#elif defined(CPU_M68020_OR_M68030_ONLY) -#define mm_cachebits 0 -#else -extern unsigned long mm_cachebits; -#endif - -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits) - -/* Alternate definitions that are compile time constants, for - initializing protection_map. The cachebits are fixed later. */ -#define PAGE_NONE_C __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) -#define PAGE_SHARED_C __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) -#define PAGE_COPY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) -#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) - -/* - * The m68k can't do page protection for execute, and considers that the same are read. - * Also, write permissions imply read permissions. This is the closest we can get.. - */ -#define __P000 PAGE_NONE_C -#define __P001 PAGE_READONLY_C -#define __P010 PAGE_COPY_C -#define __P011 PAGE_COPY_C -#define __P100 PAGE_READONLY_C -#define __P101 PAGE_READONLY_C -#define __P110 PAGE_COPY_C -#define __P111 PAGE_COPY_C - -#define __S000 PAGE_NONE_C -#define __S001 PAGE_READONLY_C -#define __S010 PAGE_SHARED_C -#define __S011 PAGE_SHARED_C -#define __S100 PAGE_READONLY_C -#define __S101 PAGE_READONLY_C -#define __S110 PAGE_SHARED_C -#define __S111 PAGE_SHARED_C - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) -{ - unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED; - unsigned long *ptr = pmdp->pmd; - short i = 16; - while (--i >= 0) { - *ptr++ = ptbl; - ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16); - } -} - -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -{ - pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp); -} - -#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK)) -#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK)) -#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK)) - - -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,ptep) ({ pte_val(*(ptep)) = 0; }) - -#define pte_page(pte) virt_to_page(__va(pte_val(pte))) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE) -#define pmd_present(pmd) (pmd_val(pmd) & _PAGE_TABLE) -#define pmd_clear(pmdp) ({ \ - unsigned long *__ptr = pmdp->pmd; \ - short __i = 16; \ - while (--__i >= 0) \ - *__ptr++ = 0; \ -}) -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) - - -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE) -#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE) -#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; }) -#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT)) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_RONLY); } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_RONLY; return pte; } -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_RONLY; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mknocache(pte_t pte) -{ - pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode; - return pte; -} -static inline pte_t pte_mkcache(pte_t pte) -{ - pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode; - return pte; -} -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address)) - -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -/* to find an entry in a page-table-directory */ -static inline pgd_t *pgd_offset(const struct mm_struct *mm, - unsigned long address) -{ - return mm->pgd + pgd_index(address); -} - -#define swapper_pg_dir kernel_pg_dir -extern pgd_t kernel_pg_dir[128]; - -static inline pgd_t *pgd_offset_k(unsigned long address) -{ - return kernel_pg_dir + (address >> PGDIR_SHIFT); -} - - -/* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) -{ - return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1)); -} - -/* Find an entry in the third-level page table.. */ -static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address) -{ - return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); -} - -#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) -#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address) -#define pte_unmap(pte) ((void)0) -#define pte_unmap_nested(pte) ((void)0) - -/* - * Allocate and free page tables. The xxx_kernel() versions are - * used to allocate a kernel page table - this turns on ASN bits - * if any. - */ - -/* Prior to calling these routines, the page should have been flushed - * from both the cache and ATC, or the CPU might not notice that the - * cache setting for the page has been changed. -jskov - */ -static inline void nocache_page(void *vaddr) -{ - unsigned long addr = (unsigned long)vaddr; - - if (CPU_IS_040_OR_060) { - pgd_t *dir; - pmd_t *pmdp; - pte_t *ptep; - - dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); - ptep = pte_offset_kernel(pmdp, addr); - *ptep = pte_mknocache(*ptep); - } -} - -static inline void cache_page(void *vaddr) -{ - unsigned long addr = (unsigned long)vaddr; - - if (CPU_IS_040_OR_060) { - pgd_t *dir; - pmd_t *pmdp; - pte_t *ptep; - - dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); - ptep = pte_offset_kernel(pmdp, addr); - *ptep = pte_mkcache(*ptep); - } -} - -#define PTE_FILE_MAX_BITS 28 - -static inline unsigned long pte_to_pgoff(pte_t pte) -{ - return pte.pte >> 4; -} - -static inline pte_t pgoff_to_pte(unsigned off) -{ - pte_t pte = { (off << 4) + _PAGE_FILE }; - return pte; -} - -/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ -#define __swp_type(x) (((x).val >> 4) & 0xff) -#define __swp_offset(x) ((x).val >> 12) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ -#endif /* _MOTOROLA_PGTABLE_H */ diff --git a/include/asm-m68k/movs.h b/include/asm-m68k/movs.h deleted file mode 100644 index 67dbea3..0000000 --- a/include/asm-m68k/movs.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __MOVS_H__ -#define __MOVS_H__ - -/* -** movs.h -** -** Inline assembly macros to generate movs & related instructions -*/ - -/* Set DFC register value */ - -#define SET_DFC(x) \ - __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x)); - -/* Get DFC register value */ - -#define GET_DFC(x) \ - __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : ); - -/* Set SFC register value */ - -#define SET_SFC(x) \ - __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x)); - -/* Get SFC register value */ - -#define GET_SFC(x) \ - __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : ); - -#define SET_VBR(x) \ - __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x)); - -#define GET_VBR(x) \ - __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : ); - -/* Set a byte using the "movs" instruction */ - -#define SET_CONTROL_BYTE(addr,value) \ - __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr)); - -/* Get a byte using the "movs" instruction */ - -#define GET_CONTROL_BYTE(addr,value) \ - __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr)); - -/* Set a (long)word using the "movs" instruction */ - -#define SET_CONTROL_WORD(addr,value) \ - __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr)); - -/* Get a (long)word using the "movs" instruction */ - -#define GET_CONTROL_WORD(addr,value) \ - __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr)); -#endif diff --git a/include/asm-m68k/msgbuf.h b/include/asm-m68k/msgbuf.h deleted file mode 100644 index 243cb79..0000000 --- a/include/asm-m68k/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_MSGBUF_H -#define _M68K_MSGBUF_H - -/* - * The msqid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _M68K_MSGBUF_H */ diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h deleted file mode 100644 index 458c1f7..0000000 --- a/include/asm-m68k/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-m68k/mvme147hw.h b/include/asm-m68k/mvme147hw.h deleted file mode 100644 index b810431..0000000 --- a/include/asm-m68k/mvme147hw.h +++ /dev/null @@ -1,113 +0,0 @@ -#ifndef _MVME147HW_H_ -#define _MVME147HW_H_ - -#include - -typedef struct { - unsigned char - ctrl, - bcd_sec, - bcd_min, - bcd_hr, - bcd_dow, - bcd_dom, - bcd_mth, - bcd_year; -} MK48T02; - -#define RTC_WRITE 0x80 -#define RTC_READ 0x40 -#define RTC_STOP 0x20 - -#define m147_rtc ((MK48T02 * volatile)0xfffe07f8) - - -struct pcc_regs { - volatile u_long dma_tadr; - volatile u_long dma_dadr; - volatile u_long dma_bcr; - volatile u_long dma_hr; - volatile u_short t1_preload; - volatile u_short t1_count; - volatile u_short t2_preload; - volatile u_short t2_count; - volatile u_char t1_int_cntrl; - volatile u_char t1_cntrl; - volatile u_char t2_int_cntrl; - volatile u_char t2_cntrl; - volatile u_char ac_fail; - volatile u_char watchdog; - volatile u_char lpt_intr; - volatile u_char lpt_cntrl; - volatile u_char dma_intr; - volatile u_char dma_cntrl; - volatile u_char bus_error; - volatile u_char dma_status; - volatile u_char abort; - volatile u_char ta_fnctl; - volatile u_char serial_cntrl; - volatile u_char general_cntrl; - volatile u_char lan_cntrl; - volatile u_char general_status; - volatile u_char scsi_interrupt; - volatile u_char slave; - volatile u_char soft1_cntrl; - volatile u_char int_base; - volatile u_char soft2_cntrl; - volatile u_char revision_level; - volatile u_char lpt_data; - volatile u_char lpt_status; - }; - -#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000) - - -#define PCC_INT_ENAB 0x08 - -#define PCC_TIMER_INT_CLR 0x80 -#define PCC_TIMER_PRELOAD 63936l - -#define PCC_LEVEL_ABORT 0x07 -#define PCC_LEVEL_SERIAL 0x04 -#define PCC_LEVEL_ETH 0x04 -#define PCC_LEVEL_TIMER1 0x04 -#define PCC_LEVEL_SCSI_PORT 0x04 -#define PCC_LEVEL_SCSI_DMA 0x04 - -#define PCC_IRQ_AC_FAIL (IRQ_USER+0) -#define PCC_IRQ_BERR (IRQ_USER+1) -#define PCC_IRQ_ABORT (IRQ_USER+2) -/* #define PCC_IRQ_SERIAL (IRQ_USER+3) */ -#define PCC_IRQ_PRINTER (IRQ_USER+7) -#define PCC_IRQ_TIMER1 (IRQ_USER+8) -#define PCC_IRQ_TIMER2 (IRQ_USER+9) -#define PCC_IRQ_SOFTWARE1 (IRQ_USER+10) -#define PCC_IRQ_SOFTWARE2 (IRQ_USER+11) - - -#define M147_SCC_A_ADDR 0xfffe3002 -#define M147_SCC_B_ADDR 0xfffe3000 -#define M147_SCC_PCLK 5000000 - -#define MVME147_IRQ_SCSI_PORT (IRQ_USER+0x45) -#define MVME147_IRQ_SCSI_DMA (IRQ_USER+0x46) - -/* SCC interrupts, for MVME147 */ - -#define MVME147_IRQ_TYPE_PRIO 0 -#define MVME147_IRQ_SCC_BASE (IRQ_USER+32) -#define MVME147_IRQ_SCCB_TX (IRQ_USER+32) -#define MVME147_IRQ_SCCB_STAT (IRQ_USER+34) -#define MVME147_IRQ_SCCB_RX (IRQ_USER+36) -#define MVME147_IRQ_SCCB_SPCOND (IRQ_USER+38) -#define MVME147_IRQ_SCCA_TX (IRQ_USER+40) -#define MVME147_IRQ_SCCA_STAT (IRQ_USER+42) -#define MVME147_IRQ_SCCA_RX (IRQ_USER+44) -#define MVME147_IRQ_SCCA_SPCOND (IRQ_USER+46) - -#define MVME147_LANCE_BASE 0xfffe1800 -#define MVME147_LANCE_IRQ (IRQ_USER+4) - -#define ETHERNET_ADDRESS 0xfffe0778 - -#endif diff --git a/include/asm-m68k/mvme16xhw.h b/include/asm-m68k/mvme16xhw.h deleted file mode 100644 index 6117f56..0000000 --- a/include/asm-m68k/mvme16xhw.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _M68K_MVME16xHW_H_ -#define _M68K_MVME16xHW_H_ - -#include - -/* Board ID data structure - pointer to this retrieved from Bug by head.S */ - -/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */ - -extern long mvme_bdid_ptr; - -typedef struct { - char bdid[4]; - u_char rev, mth, day, yr; - u_short size, reserved; - u_short brdno; - char brdsuffix[2]; - u_long options; - u_short clun, dlun, ctype, dnum; - u_long option2; -} t_bdid, *p_bdid; - - -typedef struct { - u_char ack_icr, - flt_icr, - sel_icr, - pe_icr, - bsy_icr, - spare1, - isr, - cr, - spare2, - spare3, - spare4, - data; -} MVMElp, *MVMElpPtr; - -#define MVME_LPR_BASE 0xfff42030 - -#define mvmelp ((*(volatile MVMElpPtr)(MVME_LPR_BASE))) - -typedef struct { - unsigned char - ctrl, - bcd_sec, - bcd_min, - bcd_hr, - bcd_dow, - bcd_dom, - bcd_mth, - bcd_year; -} MK48T08_t, *MK48T08ptr_t; - -#define RTC_WRITE 0x80 -#define RTC_READ 0x40 -#define RTC_STOP 0x20 - -#define MVME_RTC_BASE 0xfffc1ff8 - -#define MVME_I596_BASE 0xfff46000 - -#define MVME_SCC_A_ADDR 0xfff45005 -#define MVME_SCC_B_ADDR 0xfff45001 -#define MVME_SCC_PCLK 10000000 - -#define MVME162_IRQ_TYPE_PRIO 0 - -#define MVME167_IRQ_PRN (IRQ_USER+20) -#define MVME16x_IRQ_I596 (IRQ_USER+23) -#define MVME16x_IRQ_SCSI (IRQ_USER+21) -#define MVME16x_IRQ_FLY (IRQ_USER+63) -#define MVME167_IRQ_SER_ERR (IRQ_USER+28) -#define MVME167_IRQ_SER_MODEM (IRQ_USER+29) -#define MVME167_IRQ_SER_TX (IRQ_USER+30) -#define MVME167_IRQ_SER_RX (IRQ_USER+31) -#define MVME16x_IRQ_TIMER (IRQ_USER+25) -#define MVME167_IRQ_ABORT (IRQ_USER+46) -#define MVME162_IRQ_ABORT (IRQ_USER+30) - -/* SCC interrupts, for MVME162 */ -#define MVME162_IRQ_SCC_BASE (IRQ_USER+0) -#define MVME162_IRQ_SCCB_TX (IRQ_USER+0) -#define MVME162_IRQ_SCCB_STAT (IRQ_USER+2) -#define MVME162_IRQ_SCCB_RX (IRQ_USER+4) -#define MVME162_IRQ_SCCB_SPCOND (IRQ_USER+6) -#define MVME162_IRQ_SCCA_TX (IRQ_USER+8) -#define MVME162_IRQ_SCCA_STAT (IRQ_USER+10) -#define MVME162_IRQ_SCCA_RX (IRQ_USER+12) -#define MVME162_IRQ_SCCA_SPCOND (IRQ_USER+14) - -/* MVME162 version register */ - -#define MVME162_VERSION_REG 0xfff4202e - -extern unsigned short mvme16x_config; - -/* Lower 8 bits must match the revision register in the MC2 chip */ - -#define MVME16x_CONFIG_SPEED_32 0x0001 -#define MVME16x_CONFIG_NO_VMECHIP2 0x0002 -#define MVME16x_CONFIG_NO_SCSICHIP 0x0004 -#define MVME16x_CONFIG_NO_ETHERNET 0x0008 -#define MVME16x_CONFIG_GOT_FPU 0x0010 - -#define MVME16x_CONFIG_GOT_LP 0x0100 -#define MVME16x_CONFIG_GOT_CD2401 0x0200 -#define MVME16x_CONFIG_GOT_SCCA 0x0400 -#define MVME16x_CONFIG_GOT_SCCB 0x0800 - -#endif diff --git a/include/asm-m68k/nubus.h b/include/asm-m68k/nubus.h deleted file mode 100644 index d6be997..0000000 --- a/include/asm-m68k/nubus.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_M68K_NUBUS_H -#define _ASM_M68K_NUBUS_H - -#include - -#define nubus_readb raw_inb -#define nubus_readw raw_inw -#define nubus_readl raw_inl - -#define nubus_writeb raw_outb -#define nubus_writew raw_outw -#define nubus_writel raw_outl - -#define nubus_memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define nubus_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define nubus_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -static inline void *nubus_remap_nocache_ser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void *nubus_remap_nocache_nonser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); -} - -static inline void *nbus_remap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} - -static inline void *nubus_remap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define nubus_unmap iounmap -#define nubus_iounmap iounmap -#define nubus_ioremap nubus_remap_nocache_ser - -#endif /* _ASM_NUBUS_H */ diff --git a/include/asm-m68k/openprom.h b/include/asm-m68k/openprom.h deleted file mode 100644 index d33cdad..0000000 --- a/include/asm-m68k/openprom.h +++ /dev/null @@ -1,312 +0,0 @@ -#ifndef __SPARC_OPENPROM_H -#define __SPARC_OPENPROM_H - -/* openprom.h: Prom structures and defines for access to the OPENBOOT - * prom routines and data areas. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - - -/* Empirical constants... */ -#ifdef CONFIG_SUN3 -#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/ -#define LINUX_OPPROM_BEGVM 0x0fef0000 -#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */ -#else -#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ -#define LINUX_OPPROM_BEGVM 0xffd00000 -#define LINUX_OPPROM_ENDVM 0xfff00000 -#define LINUX_OPPROM_MAGIC 0x10010407 -#endif - -#ifndef __ASSEMBLY__ -/* V0 prom device operations. */ -struct linux_dev_v0_funcs { - int (*v0_devopen)(char *device_str); - int (*v0_devclose)(int dev_desc); - int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_seekdev)(int dev_desc, long logical_offst, int from); -}; - -/* V2 and later prom device operations. */ -struct linux_dev_v2_funcs { - int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ - char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); - void (*v2_dumb_mem_free)(char *va, unsigned sz); - - /* To map devices into virtual I/O space. */ - char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); - void (*v2_dumb_munmap)(char *virta, unsigned size); - - int (*v2_dev_open)(char *devpath); - void (*v2_dev_close)(int d); - int (*v2_dev_read)(int d, char *buf, int nbytes); - int (*v2_dev_write)(int d, char *buf, int nbytes); - int (*v2_dev_seek)(int d, int hi, int lo); - - /* Never issued (multistage load support) */ - void (*v2_wheee2)(void); - void (*v2_wheee3)(void); -}; - -struct linux_mlist_v0 { - struct linux_mlist_v0 *theres_more; - char *start_adr; - unsigned num_bytes; -}; - -struct linux_mem_v0 { - struct linux_mlist_v0 **v0_totphys; - struct linux_mlist_v0 **v0_prommap; - struct linux_mlist_v0 **v0_available; /* What we can use */ -}; - -/* Arguments sent to the kernel from the boot prompt. */ -struct linux_arguments_v0 { - char *argv[8]; - char args[100]; - char boot_dev[2]; - int boot_dev_ctrl; - int boot_dev_unit; - int dev_partition; - char *kernel_file_name; - void *aieee1; /* XXX */ -}; - -/* V2 and up boot things. */ -struct linux_bootargs_v2 { - char **bootpath; - char **bootargs; - int *fd_stdin; - int *fd_stdout; -}; - -#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -struct linux_romvec { - char *pv_initsp; - int (*pv_startmon)(void); - - int *diagberr; - - struct linux_arguments_v0 **pv_v0bootargs; - unsigned *pv_sun3mem; - - unsigned char (*pv_getchar)(void); - int (*pv_putchar)(int ch); - int (*pv_nbgetchar)(void); - int (*pv_nbputchar)(int ch); - unsigned char *pv_echo; - unsigned char *pv_insource; - unsigned char *pv_outsink; - - int (*pv_getkey)(void); - int (*pv_initgetkey)(void); - unsigned int *pv_translation; - unsigned char *pv_keybid; - int *pv_screen_x; - int *pv_screen_y; - struct keybuf *pv_keybuf; - - char *pv_monid; - - /* - * Frame buffer output and terminal emulation - */ - - int (*pv_fbwritechar)(char); - int *pv_fbaddr; - char **pv_font; - int (*pv_fbwritestr)(char); - - void (*pv_reboot)(char *bootstr); - - /* - * Line input and parsing - */ - - unsigned char *pv_linebuf; - unsigned char **pv_lineptr; - int *pv_linesize; - int (*pv_getline)(void); - unsigned char (*pv_getnextchar)(void); - unsigned char (*pv_peeknextchar)(void); - int *pv_fbthere; - int (*pv_getnum)(void); - - void (*pv_printf)(const char *fmt, ...); - int (*pv_printhex)(void); - - unsigned char *pv_leds; - int (*pv_setleds)(void); - - /* - * Non-maskable interrupt (nmi) information - */ - - int (*pv_nmiaddr)(void); - int (*pv_abortentry)(void); - int *pv_nmiclock; - - int *pv_fbtype; - - /* - * Assorted other things - */ - - unsigned pv_romvers; - struct globram *pv_globram; - char *pv_kbdzscc; - - int *pv_keyrinit; - unsigned char *pv_keyrtick; - unsigned *pv_memoryavail; - long *pv_resetaddr; - long *pv_resetmap; - - void (*pv_halt)(void); - unsigned char *pv_memorybitmap; - -#ifdef CONFIG_SUN3 - void (*pv_setctxt)(int ctxt, char *va, int pmeg); - void (*pv_vector_cmd)(void); - int dummy1z; - int dummy2z; - int dummy3z; - int dummy4z; -#endif -}; -#else -/* The top level PROM vector. */ -struct linux_romvec { - /* Version numbers. */ - unsigned int pv_magic_cookie; - unsigned int pv_romvers; - unsigned int pv_plugin_revision; - unsigned int pv_printrev; - - /* Version 0 memory descriptors. */ - struct linux_mem_v0 pv_v0mem; - - /* Node operations. */ - struct linux_nodeops *pv_nodeops; - - char **pv_bootstr; - struct linux_dev_v0_funcs pv_v0devops; - - char *pv_stdin; - char *pv_stdout; -#define PROMDEV_KBD 0 /* input from keyboard */ -#define PROMDEV_SCREEN 0 /* output to screen */ -#define PROMDEV_TTYA 1 /* in/out to ttya */ -#define PROMDEV_TTYB 2 /* in/out to ttyb */ - - /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ - int (*pv_getchar)(void); - void (*pv_putchar)(int ch); - - /* Non-blocking variants. */ - int (*pv_nbgetchar)(void); - int (*pv_nbputchar)(int ch); - - void (*pv_putstr)(char *str, int len); - - /* Miscellany. */ - void (*pv_reboot)(char *bootstr); - void (*pv_printf)(__const__ char *fmt, ...); - void (*pv_abort)(void); - __volatile__ int *pv_ticks; - void (*pv_halt)(void); - void (**pv_synchook)(void); - - /* Evaluate a forth string, not different proto for V0 and V2->up. */ - union { - void (*v0_eval)(int len, char *str); - void (*v2_eval)(char *str); - } pv_fortheval; - - struct linux_arguments_v0 **pv_v0bootargs; - - /* Get ether address. */ - unsigned int (*pv_enaddr)(int d, char *enaddr); - - struct linux_bootargs_v2 pv_v2bootargs; - struct linux_dev_v2_funcs pv_v2devops; - - int filler[15]; - - /* This one is sun4c/sun4 only. */ - void (*pv_setctxt)(int ctxt, char *va, int pmeg); - - /* Prom version 3 Multiprocessor routines. This stuff is crazy. - * No joke. Calling these when there is only one cpu probably - * crashes the machine, have to test this. :-) - */ - - /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context - * 'thiscontext' executing at address 'prog_counter' - */ - int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, - int thiscontext, char *prog_counter); - - /* v3_cpustop() will cause cpu 'whichcpu' to stop executing - * until a resume cpu call is made. - */ - int (*v3_cpustop)(unsigned int whichcpu); - - /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or - * resume cpu call is made. - */ - int (*v3_cpuidle)(unsigned int whichcpu); - - /* v3_cpuresume() will resume processor 'whichcpu' executing - * starting with whatever 'pc' and 'npc' were left at the - * last 'idle' or 'stop' call. - */ - int (*v3_cpuresume)(unsigned int whichcpu); -}; -#endif - -/* Routines for traversing the prom device tree. */ -struct linux_nodeops { - int (*no_nextnode)(int node); - int (*no_child)(int node); - int (*no_proplen)(int node, char *name); - int (*no_getprop)(int node, char *name, char *val); - int (*no_setprop)(int node, char *name, char *val, int len); - char * (*no_nextprop)(int node, char *name); -}; - -/* More fun PROM structures for device probing. */ -#define PROMREG_MAX 16 -#define PROMVADDR_MAX 16 -#define PROMINTR_MAX 15 - -struct linux_prom_registers { - int which_io; /* is this in OBIO space? */ - char *phys_addr; /* The physical address of this register */ - int reg_size; /* How many bytes does this register take up? */ -}; - -struct linux_prom_irqs { - int pri; /* IRQ priority */ - int vector; /* This is foobar, what does it do? */ -}; - -/* Element of the "ranges" vector */ -struct linux_prom_ranges { - unsigned int ot_child_space; - unsigned int ot_child_base; /* Bus feels this */ - unsigned int ot_parent_space; - unsigned int ot_parent_base; /* CPU looks from here */ - unsigned int or_size; -}; - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/include/asm-m68k/oplib.h b/include/asm-m68k/oplib.h deleted file mode 100644 index f082d03..0000000 --- a/include/asm-m68k/oplib.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * oplib.h: Describes the interface and available routines in the - * Linux Prom library. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __SPARC_OPLIB_H -#define __SPARC_OPLIB_H - -#include - -/* The master romvec pointer... */ -extern struct linux_romvec *romvec; - -/* Enumeration to describe the prom major version we have detected. */ -enum prom_major_version { - PROM_V0, /* Original sun4c V0 prom */ - PROM_V2, /* sun4c and early sun4m V2 prom */ - PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ - PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ -}; - -extern enum prom_major_version prom_vers; -/* Revision, and firmware revision. */ -extern unsigned int prom_rev, prom_prev; - -/* Root node of the prom device tree, this stays constant after - * initialization is complete. - */ -extern int prom_root_node; - -/* Pointer to prom structure containing the device tree traversal - * and usage utility functions. Only prom-lib should use these, - * users use the interface defined by the library only! - */ -extern struct linux_nodeops *prom_nodeops; - -/* The functions... */ - -/* You must call prom_init() before using any of the library services, - * preferably as early as possible. Pass it the romvec pointer. - */ -extern void prom_init(struct linux_romvec *rom_ptr); - -/* Boot argument acquisition, returns the boot command line string. */ -extern char *prom_getbootargs(void); - -/* Device utilities. */ - -/* Map and unmap devices in IO space at virtual addresses. Note that the - * virtual address you pass is a request and the prom may put your mappings - * somewhere else, so check your return value as that is where your new - * mappings really are! - * - * Another note, these are only available on V2 or higher proms! - */ -extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); -extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - -/* Machine memory configuration routine. */ - -/* This function returns a V0 format memory descriptor table, it has three - * entries. One for the total amount of physical ram on the machine, one - * for the amount of physical ram available, and one describing the virtual - * areas which are allocated by the prom. So, in a sense the physical - * available is a calculation of the total physical minus the physical mapped - * by the prom with virtual mappings. - * - * These lists are returned pre-sorted, this should make your life easier - * since the prom itself is way too lazy to do such nice things. - */ -extern struct linux_mem_v0 *prom_meminfo(void); - -/* Miscellaneous routines, don't really fit in any category per se. */ - -/* Reboot the machine with the command line passed. */ -extern void prom_reboot(char *boot_command); - -/* Evaluate the forth string passed. */ -extern void prom_feval(char *forth_string); - -/* Enter the prom, with possibility of continuation with the 'go' - * command in newer proms. - */ -extern void prom_cmdline(void); - -/* Enter the prom, with no chance of continuation for the stand-alone - * which calls this. - */ -extern void prom_halt(void); - -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX - */ -typedef void (*sync_func_t)(void); -extern void prom_setsync(sync_func_t func_ptr); - -/* Acquire the IDPROM of the root node in the prom device tree. This - * gets passed a buffer where you would like it stuffed. The return value - * is the format type of this idprom or 0xff on error. - */ -extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); - -/* Get the prom major version. */ -extern int prom_version(void); - -/* Get the prom plugin revision. */ -extern int prom_getrev(void); - -/* Get the prom firmware revision. */ -extern int prom_getprev(void); - -/* Character operations to/from the console.... */ - -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - -/* Blocking get character from console. */ -extern char prom_getchar(void); - -/* Blocking put character to console. */ -extern void prom_putchar(char character); - -/* Prom's internal printf routine, don't use in kernel/boot code. */ -void prom_printf(char *fmt, ...); - -/* Query for input device type */ - -enum prom_input_device { - PROMDEV_IKBD, /* input from keyboard */ - PROMDEV_ITTYA, /* input from ttya */ - PROMDEV_ITTYB, /* input from ttyb */ - PROMDEV_I_UNK, -}; - -extern enum prom_input_device prom_query_input_device(void); - -/* Query for output device type */ - -enum prom_output_device { - PROMDEV_OSCREEN, /* to screen */ - PROMDEV_OTTYA, /* to ttya */ - PROMDEV_OTTYB, /* to ttyb */ - PROMDEV_O_UNK, -}; - -extern enum prom_output_device prom_query_output_device(void); - -/* Multiprocessor operations... */ - -/* Start the CPU with the given device tree node, context table, and context - * at the passed program counter. - */ -extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, - int context, char *program_counter); - -/* Stop the CPU with the passed device tree node. */ -extern int prom_stopcpu(int cpunode); - -/* Idle the CPU with the passed device tree node. */ -extern int prom_idlecpu(int cpunode); - -/* Re-Start the CPU with the passed device tree node. */ -extern int prom_restartcpu(int cpunode); - -/* PROM memory allocation facilities... */ - -/* Allocated at possibly the given virtual address a chunk of the - * indicated size. - */ -extern char *prom_alloc(char *virt_hint, unsigned int size); - -/* Free a previously allocated chunk. */ -extern void prom_free(char *virt_addr, unsigned int size); - -/* Sun4/sun4c specific memory-management startup hook. */ - -/* Map the passed segment in the given context at the passed - * virtual address. - */ -extern void prom_putsegment(int context, unsigned long virt_addr, - int physical_segment); - -/* PROM device tree traversal functions... */ - -/* Get the child node of the given node, or zero if no child exists. */ -extern int prom_getchild(int parent_node); - -/* Get the next sibling node of the given node, or zero if no further - * siblings exist. - */ -extern int prom_getsibling(int node); - -/* Get the length, at the passed node, of the given property type. - * Returns -1 on error (ie. no such property at this node). - */ -extern int prom_getproplen(int thisnode, char *property); - -/* Fetch the requested property using the given buffer. Returns - * the number of bytes the prom put into your buffer or -1 on error. - */ -extern int prom_getproperty(int thisnode, char *property, - char *prop_buffer, int propbuf_size); - -/* Acquire an integer property. */ -extern int prom_getint(int node, char *property); - -/* Acquire an integer property, with a default value. */ -extern int prom_getintdefault(int node, char *property, int defval); - -/* Acquire a boolean property, 0=FALSE 1=TRUE. */ -extern int prom_getbool(int node, char *prop); - -/* Acquire a string property, null string on error. */ -extern void prom_getstring(int node, char *prop, char *buf, int bufsize); - -/* Does the passed node have the given "name"? YES=1 NO=0 */ -extern int prom_nodematch(int thisnode, char *name); - -/* Search all siblings starting at the passed node for "name" matching - * the given string. Returns the node on success, zero on failure. - */ -extern int prom_searchsiblings(int node_start, char *name); - -/* Return the first property type, as a string, for the given node. - * Returns a null string on error. - */ -extern char *prom_firstprop(int node); - -/* Returns the next property after the passed property for the given - * node. Returns null string on failure. - */ -extern char *prom_nextprop(int node, char *prev_property); - -/* Returns 1 if the specified node has given property. */ -extern int prom_node_has_property(int node, char *property); - -/* Set the indicated property at the given node with the passed value. - * Returns the number of bytes of your value that the prom took. - */ -extern int prom_setprop(int node, char *prop_name, char *prop_value, - int value_size); - -extern int prom_pathtoinode(char *path); -extern int prom_inst2pkg(int); - -/* Dorking with Bus ranges... */ - -/* Adjust reg values with the passed ranges. */ -extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs, - struct linux_prom_ranges *rangep, int nranges); - -/* Adjust child ranges with the passed parent ranges. */ -extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges, - struct linux_prom_ranges *pranges, int npranges); - -/* Apply promlib probed OBIO ranges to registers. */ -extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); - -/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ -extern void prom_apply_generic_ranges(int node, int parent, - struct linux_prom_registers *sbusregs, int nregs); - - -#endif /* !(__SPARC_OPLIB_H) */ diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h deleted file mode 100644 index a34b8ba..0000000 --- a/include/asm-m68k/page.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef _M68K_PAGE_H -#define _M68K_PAGE_H - -#include - -/* PAGE_SHIFT determines the page size */ -#ifndef CONFIG_SUN3 -#define PAGE_SHIFT (12) -#else -#define PAGE_SHIFT (13) -#endif -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include - -#if PAGE_SHIFT < 13 -#define THREAD_SIZE (8192) -#else -#define THREAD_SIZE PAGE_SIZE -#endif - -#ifndef __ASSEMBLY__ - -#include - -#include - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -/* - * We don't need to check for alignment etc. - */ -#ifdef CPU_M68040_OR_M68060_ONLY -static inline void copy_page(void *to, void *from) -{ - unsigned long tmp; - - __asm__ __volatile__("1:\t" - ".chip 68040\n\t" - "move16 %1@+,%0@+\n\t" - "move16 %1@+,%0@+\n\t" - ".chip 68k\n\t" - "dbra %2,1b\n\t" - : "=a" (to), "=a" (from), "=d" (tmp) - : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1) - ); -} - -static inline void clear_page(void *page) -{ - unsigned long tmp; - unsigned long *sp = page; - - *sp++ = 0; - *sp++ = 0; - *sp++ = 0; - *sp++ = 0; - - __asm__ __volatile__("1:\t" - ".chip 68040\n\t" - "move16 %2@+,%0@+\n\t" - ".chip 68k\n\t" - "subqw #8,%2\n\t" - "subqw #8,%2\n\t" - "dbra %1,1b\n\t" - : "=a" (sp), "=d" (tmp) - : "a" (page), "0" (sp), - "1" ((PAGE_SIZE - 16) / 16 - 1)); -} - -#else -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) -#endif - -#define clear_user_page(addr, vaddr, page) \ - do { clear_page(addr); \ - flush_dcache_page(page); \ - } while (0) -#define copy_user_page(to, from, vaddr, page) \ - do { copy_page(to, from); \ - flush_dcache_page(page); \ - } while (0) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#endif /* !__ASSEMBLY__ */ - -#include - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -extern unsigned long m68k_memoffset; - -#ifndef CONFIG_SUN3 - -#define WANT_PAGE_VIRTUAL - -static inline unsigned long ___pa(void *vaddr) -{ - unsigned long paddr; - asm ( - "1: addl #0,%0\n" - m68k_fixup(%c2, 1b+2) - : "=r" (paddr) - : "0" (vaddr), "i" (m68k_fixup_memoffset)); - return paddr; -} -#define __pa(vaddr) ___pa((void *)(vaddr)) -static inline void *__va(unsigned long paddr) -{ - void *vaddr; - asm ( - "1: subl #0,%0\n" - m68k_fixup(%c2, 1b+2) - : "=r" (vaddr) - : "0" (paddr), "i" (m68k_fixup_memoffset)); - return vaddr; -} - -#else /* !CONFIG_SUN3 */ -/* This #define is a horrible hack to suppress lots of warnings. --m */ -#define __pa(x) ___pa((unsigned long)(x)) -static inline unsigned long ___pa(unsigned long x) -{ - if(x == 0) - return 0; - if(x >= PAGE_OFFSET) - return (x-PAGE_OFFSET); - else - return (x+0x2000000); -} - -static inline void *__va(unsigned long x) -{ - if(x == 0) - return (void *)0; - - if(x < 0x2000000) - return (void *)(x+PAGE_OFFSET); - else - return (void *)(x-0x2000000); -} -#endif /* CONFIG_SUN3 */ - -/* - * NOTE: virtual isn't really correct, actually it should be the offset into the - * memory node, but we have no highmem, so that works for now. - * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots - * of the shifts unnecessary. - */ -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) - -extern int m68k_virt_to_node_shift; - -#ifdef CONFIG_SINGLE_MEMORY_CHUNK -#define __virt_to_node(addr) (&pg_data_map[0]) -#else -extern struct pglist_data *pg_data_table[]; - -static inline __attribute_const__ int __virt_to_node_shift(void) -{ - int shift; - - asm ( - "1: moveq #0,%0\n" - m68k_fixup(%c1, 1b) - : "=d" (shift) - : "i" (m68k_fixup_vnode_shift)); - return shift; -} - -#define __virt_to_node(addr) (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()]) -#endif - -#define virt_to_page(addr) ({ \ - pfn_to_page(virt_to_pfn(addr)); \ -}) -#define page_to_virt(page) ({ \ - pfn_to_virt(page_to_pfn(page)); \ -}) - -#define pfn_to_page(pfn) ({ \ - unsigned long __pfn = (pfn); \ - struct pglist_data *pgdat; \ - pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn)); \ - pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \ -}) -#define page_to_pfn(_page) ({ \ - struct page *__p = (_page); \ - struct pglist_data *pgdat; \ - pgdat = &pg_data_map[page_to_nid(__p)]; \ - ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \ -}) - -#define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory) -#define pfn_valid(pfn) virt_addr_valid(pfn_to_virt(pfn)) - -#endif /* __ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include - -#endif /* _M68K_PAGE_H */ diff --git a/include/asm-m68k/page_offset.h b/include/asm-m68k/page_offset.h deleted file mode 100644 index 1cbdb7f..0000000 --- a/include/asm-m68k/page_offset.h +++ /dev/null @@ -1,8 +0,0 @@ - -/* This handles the memory map.. */ -#ifndef CONFIG_SUN3 -#define PAGE_OFFSET_RAW 0x00000000 -#else -#define PAGE_OFFSET_RAW 0x0E000000 -#endif - diff --git a/include/asm-m68k/param.h b/include/asm-m68k/param.h deleted file mode 100644 index 536a278..0000000 --- a/include/asm-m68k/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_PARAM_H -#define _M68K_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 8192 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _M68K_PARAM_H */ diff --git a/include/asm-m68k/parport.h b/include/asm-m68k/parport.h deleted file mode 100644 index 646b187..0000000 --- a/include/asm-m68k/parport.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - * - * RZ: for use with Q40 and other ISA machines - */ - -#ifndef _ASM_M68K_PARPORT_H -#define _ASM_M68K_PARPORT_H 1 - -#define insl(port,buf,len) isa_insb(port,buf,(len)<<2) -#define outsl(port,buf,len) isa_outsb(port,buf,(len)<<2) - -/* no dma, or IRQ autoprobing */ -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - if (! (MACH_IS_Q40)) - return 0; /* count=0 */ - return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE); -} - -#endif /* !(_ASM_M68K_PARPORT_H) */ diff --git a/include/asm-m68k/pci.h b/include/asm-m68k/pci.h deleted file mode 100644 index 4ad0aea..0000000 --- a/include/asm-m68k/pci.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M68K_PCI_H -#define _ASM_M68K_PCI_H - -#include - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#endif /* _ASM_M68K_PCI_H */ diff --git a/include/asm-m68k/percpu.h b/include/asm-m68k/percpu.h deleted file mode 100644 index 0859d04..0000000 --- a/include/asm-m68k/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/include/asm-m68k/pgalloc.h b/include/asm-m68k/pgalloc.h deleted file mode 100644 index 4cb1a57..0000000 --- a/include/asm-m68k/pgalloc.h +++ /dev/null @@ -1,19 +0,0 @@ - -#ifndef M68K_PGALLOC_H -#define M68K_PGALLOC_H - -#include -#include -#include -#include - - -#ifdef CONFIG_SUN3 -#include -#else -#include -#endif - -extern void m68k_setup_node(int node); - -#endif /* M68K_PGALLOC_H */ diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h deleted file mode 100644 index 0b604f0..0000000 --- a/include/asm-m68k/pgtable.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _M68K_PGTABLE_H -#define _M68K_PGTABLE_H - -#include - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include - -/* - * This file contains the functions and defines necessary to modify and use - * the m68k page table tree. - */ - -#include - -/* Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) \ - do{ \ - *(pteptr) = (pteval); \ - } while(0) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#ifdef CONFIG_SUN3 -#define PMD_SHIFT 17 -#else -#define PMD_SHIFT 22 -#endif -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#ifdef CONFIG_SUN3 -#define PGDIR_SHIFT 17 -#else -#define PGDIR_SHIFT 25 -#endif -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: the m68k is configured as three-level, - * so we do have PMD level physically. - */ -#ifdef CONFIG_SUN3 -#define PTRS_PER_PTE 16 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 -#else -#define PTRS_PER_PTE 1024 -#define PTRS_PER_PMD 8 -#define PTRS_PER_PGD 128 -#endif -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -/* Virtual address region for use by kernel_map() */ -#ifdef CONFIG_SUN3 -#define KMAP_START 0x0DC00000 -#define KMAP_END 0x0E000000 -#else -#define KMAP_START 0xd0000000 -#define KMAP_END 0xf0000000 -#endif - -#ifndef CONFIG_SUN3 -/* Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_OFFSET (8*1024*1024) -#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END KMAP_START -#else -extern unsigned long vmalloc_end; -#define VMALLOC_START 0x0f800000 -#define VMALLOC_END vmalloc_end -#endif /* CONFIG_SUN3 */ - -/* zero page used for uninitialized stuff */ -extern void *empty_zero_page; - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -/* number of bits that fit into a memory pointer */ -#define BITS_PER_PTR (8*sizeof(unsigned long)) - -/* to align the pointer to a pointer address */ -#define PTR_MASK (~(sizeof(void*)-1)) - -/* sizeof(void*)==1< -#else -#include -#endif - -#ifndef __ASSEMBLY__ -#include - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#ifdef SUN3_PAGE_NOCACHE -# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE -#else -# define __SUN3_PAGE_NOCACHE 0 -#endif -#define pgprot_noncached(prot) \ - (MMU_IS_SUN3 \ - ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \ - : ((MMU_IS_851 || MMU_IS_030) \ - ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030)) \ - : (MMU_IS_040 || MMU_IS_060) \ - ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ - : (prot))) - -#endif /* !__ASSEMBLY__ */ - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#define check_pgt_cache() do { } while (0) - -#endif /* _M68K_PGTABLE_H */ diff --git a/include/asm-m68k/poll.h b/include/asm-m68k/poll.h deleted file mode 100644 index f080fcd..0000000 --- a/include/asm-m68k/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __m68k_POLL_H -#define __m68k_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include - -#endif diff --git a/include/asm-m68k/posix_types.h b/include/asm-m68k/posix_types.h deleted file mode 100644 index 63cdcc1..0000000 --- a/include/asm-m68k/posix_types.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __ARCH_M68K_POSIX_TYPES_H -#define __ARCH_M68K_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) - -#endif /* defined(__KERNEL__) */ - -#endif diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h deleted file mode 100644 index 1f61ef5..0000000 --- a/include/asm-m68k/processor.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-m68k/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include -#include -#include -#include - -static inline unsigned long rdusp(void) -{ - unsigned long usp; - - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -} - -static inline void wrusp(unsigned long usp) -{ - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#ifndef CONFIG_SUN3 -#define TASK_SIZE (0xF0000000UL) -#else -#define TASK_SIZE (0x0E000000UL) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#ifndef CONFIG_SUN3 -#define TASK_UNMAPPED_BASE 0xC0000000UL -#else -#define TASK_UNMAPPED_BASE 0x0A000000UL -#endif -#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long faddr; /* info about last fault */ - int signo, code; - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct thread_info info; -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ - .info = INIT_THREAD_INFO(init_task), \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long usp) -{ - /* reads from user space */ - set_fs(USER_DS); - - regs->pc = pc; - regs->sr &= ~0x2000; - wrusp(usp); -} - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h deleted file mode 100644 index 57e763d..0000000 --- a/include/asm-m68k/ptrace.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef _M68K_PTRACE_H -#define _M68K_PTRACE_H - -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 - -#ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#ifdef __KERNEL__ - -#ifndef PS_S -#define PS_S (0x2000) -#define PS_M (0x1000) -#endif - -#define user_mode(regs) (!((regs)->sr & PS_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _M68K_PTRACE_H */ diff --git a/include/asm-m68k/q40_master.h b/include/asm-m68k/q40_master.h deleted file mode 100644 index 3907a09..0000000 --- a/include/asm-m68k/q40_master.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Q40 master Chip Control - * RTC stuff merged for compactnes.. -*/ - -#ifndef _Q40_MASTER_H -#define _Q40_MASTER_H - -#include - - -#define q40_master_addr 0xff000000 - -#define IIRQ_REG 0x0 /* internal IRQ reg */ -#define EIRQ_REG 0x4 /* external ... */ -#define KEYCODE_REG 0x1c /* value of received scancode */ -#define DISPLAY_CONTROL_REG 0x18 -#define FRAME_CLEAR_REG 0x24 -#define LED_REG 0x30 - -#define Q40_LED_ON() master_outb(1,LED_REG) -#define Q40_LED_OFF() master_outb(0,LED_REG) - -#define INTERRUPT_REG IIRQ_REG /* "native" ints */ -#define KEY_IRQ_ENABLE_REG 0x08 /**/ -#define KEYBOARD_UNLOCK_REG 0x20 /* clear kb int */ - -#define SAMPLE_ENABLE_REG 0x14 /* generate SAMPLE ints */ -#define SAMPLE_RATE_REG 0x2c -#define SAMPLE_CLEAR_REG 0x28 -#define SAMPLE_LOW 0x00 -#define SAMPLE_HIGH 0x01 - -#define FRAME_RATE_REG 0x38 /* generate FRAME ints at 200 HZ rate */ - -#if 0 -#define SER_ENABLE_REG 0x0c /* allow serial ints to be generated */ -#endif -#define EXT_ENABLE_REG 0x10 /* ... rest of the ISA ints ... */ - - -#define master_inb(_reg_) in_8((unsigned char *)q40_master_addr+_reg_) -#define master_outb(_b_,_reg_) out_8((unsigned char *)q40_master_addr+_reg_,_b_) - -/* RTC defines */ - -#define Q40_RTC_BASE (0xff021ffc) - -#define Q40_RTC_YEAR (*(volatile unsigned char *)(Q40_RTC_BASE+0)) -#define Q40_RTC_MNTH (*(volatile unsigned char *)(Q40_RTC_BASE-4)) -#define Q40_RTC_DATE (*(volatile unsigned char *)(Q40_RTC_BASE-8)) -#define Q40_RTC_DOW (*(volatile unsigned char *)(Q40_RTC_BASE-12)) -#define Q40_RTC_HOUR (*(volatile unsigned char *)(Q40_RTC_BASE-16)) -#define Q40_RTC_MINS (*(volatile unsigned char *)(Q40_RTC_BASE-20)) -#define Q40_RTC_SECS (*(volatile unsigned char *)(Q40_RTC_BASE-24)) -#define Q40_RTC_CTRL (*(volatile unsigned char *)(Q40_RTC_BASE-28)) - -/* some control bits */ -#define Q40_RTC_READ 64 /* prepare for reading */ -#define Q40_RTC_WRITE 128 - -/* define some Q40 specific ints */ -#include "q40ints.h" - -/* misc defs */ -#define DAC_LEFT ((unsigned char *)0xff008000) -#define DAC_RIGHT ((unsigned char *)0xff008004) - -#endif /* _Q40_MASTER_H */ diff --git a/include/asm-m68k/q40ints.h b/include/asm-m68k/q40ints.h deleted file mode 100644 index 3d970af..0000000 --- a/include/asm-m68k/q40ints.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * contains some Q40 related interrupt definitions - */ - -#define Q40_IRQ_MAX (34) - -#define Q40_IRQ_SAMPLE (34) -#define Q40_IRQ_KEYBOARD (32) -#define Q40_IRQ_FRAME (33) - - -/* masks for interrupt regiosters*/ -/* internal, IIRQ_REG */ -#define Q40_IRQ_KEYB_MASK (2) -#define Q40_IRQ_SER_MASK (1<<2) -#define Q40_IRQ_FRAME_MASK (1<<3) -#define Q40_IRQ_EXT_MASK (1<<4) /* is a EIRQ */ -/* eirq, EIRQ_REG */ -#define Q40_IRQ3_MASK (1) -#define Q40_IRQ4_MASK (1<<1) -#define Q40_IRQ5_MASK (1<<2) -#define Q40_IRQ6_MASK (1<<3) -#define Q40_IRQ7_MASK (1<<4) -#define Q40_IRQ10_MASK (1<<5) -#define Q40_IRQ14_MASK (1<<6) -#define Q40_IRQ15_MASK (1<<7) - -extern unsigned long q40_probe_irq_on (void); -extern int q40_probe_irq_off (unsigned long irqs); diff --git a/include/asm-m68k/raw_io.h b/include/asm-m68k/raw_io.h deleted file mode 100644 index d9eb983..0000000 --- a/include/asm-m68k/raw_io.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/include/asm-m68k/raw_io.h - * - * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace - * - */ - -#ifndef _RAW_IO_H -#define _RAW_IO_H - -#ifdef __KERNEL__ - -#include - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void iounmap(void __iomem *addr); - -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, - int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - - -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesirable for some devices. - */ -#define in_8(addr) \ - ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; }) -#define in_be16(addr) \ - ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; }) -#define in_be32(addr) \ - ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; }) -#define in_le16(addr) \ - ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; }) -#define in_le32(addr) \ - ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; }) - -#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b)) -#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w)) -#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l)) -#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) -#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) - -#define raw_inb in_8 -#define raw_inw in_be16 -#define raw_inl in_be32 -#define __raw_readb in_8 -#define __raw_readw in_be16 -#define __raw_readl in_be32 - -#define raw_outb(val,port) out_8((port),(val)) -#define raw_outw(val,port) out_be16((port),(val)) -#define raw_outl(val,port) out_be32((port),(val)) -#define __raw_writeb(val,addr) out_8((addr),(val)) -#define __raw_writew(val,addr) out_be16((addr),(val)) -#define __raw_writel(val,addr) out_be32((addr),(val)) - -static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) -{ - unsigned int i; - - for (i = 0; i < len; i++) - *buf++ = in_8(port); -} - -static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf, - unsigned int len) -{ - unsigned int i; - - for (i = 0; i < len; i++) - out_8(port, *buf++); -} - -static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movew %2@,%0@+; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf, - unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movew %0@+,%2@; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movel %2@,%0@+; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf, - unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movel %0@+,%2@; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - - -static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf, - unsigned int nr) -{ - if ((nr) % 8) - __asm__ __volatile__ - ("\tmovel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); - else - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "lsrl #3,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); -} - -static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, - unsigned int nr) -{ - if ((nr) % 8) - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); - else - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "lsrl #3,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); -} - -#endif /* __KERNEL__ */ - -#endif /* _RAW_IO_H */ diff --git a/include/asm-m68k/resource.h b/include/asm-m68k/resource.h deleted file mode 100644 index e7d3501..0000000 --- a/include/asm-m68k/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include - -#endif /* _M68K_RESOURCE_H */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h deleted file mode 100644 index 5d3e038..0000000 --- a/include/asm-m68k/rtc.h +++ /dev/null @@ -1,76 +0,0 @@ -/* include/asm-m68k/rtc.h - * - * Copyright Richard Zidlicky - * implementation details for genrtc/q40rtc driver - */ -/* permission is hereby granted to copy, modify and redistribute this code - * in terms of the GNU Library General Public License, Version 2 or later, - * at your option. - */ - -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -#ifdef __KERNEL__ - -#include -#include -#include - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - mach_hwclk(0, time); - return RTC_24H; -} - -static inline int set_rtc_time(struct rtc_time *time) -{ - return mach_hwclk(1, time); -} - -static inline unsigned int get_rtc_ss(void) -{ - if (mach_get_ss) - return mach_get_ss(); - else{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; - } -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - if (mach_get_rtc_pll) - return mach_get_rtc_pll(pll); - else - return -EINVAL; -} -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - if (mach_set_rtc_pll) - return mach_set_rtc_pll(pll); - else - return -EINVAL; -} -#endif /* __KERNEL__ */ - -#endif /* _ASM__RTC_H */ diff --git a/include/asm-m68k/sbus.h b/include/asm-m68k/sbus.h deleted file mode 100644 index bfe3ba1..0000000 --- a/include/asm-m68k/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif diff --git a/include/asm-m68k/scatterlist.h b/include/asm-m68k/scatterlist.h deleted file mode 100644 index d3a7a0e..0000000 --- a/include/asm-m68k/scatterlist.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - __u32 dma_address; /* A place to hang host-specific addresses at. */ -}; - -/* This is bogus and should go away. */ -#define ISA_DMA_THRESHOLD (0x00ffffff) - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/include/asm-m68k/sections.h b/include/asm-m68k/sections.h deleted file mode 100644 index d64967e..0000000 --- a/include/asm-m68k/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include - -#endif /* _ASM_M68K_SECTIONS_H */ diff --git a/include/asm-m68k/segment.h b/include/asm-m68k/segment.h deleted file mode 100644 index 7b0b2d3..0000000 --- a/include/asm-m68k/segment.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ - -static inline mm_segment_t get_fs(void) -{ - mm_segment_t _v; - __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); - - return _v; -} - -static inline mm_segment_t get_ds(void) -{ - /* return the supervisor data space code */ - return KERNEL_DS; -} - -static inline void set_fs(mm_segment_t val) -{ - __asm__ __volatile__ ("movec %0,%/sfc\n\t" - "movec %0,%/dfc\n\t" - : /* no outputs */ : "r" (val.seg) : "memory"); -} - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/include/asm-m68k/sembuf.h b/include/asm-m68k/sembuf.h deleted file mode 100644 index 2308052..0000000 --- a/include/asm-m68k/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_SEMBUF_H -#define _M68K_SEMBUF_H - -/* - * The semid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _M68K_SEMBUF_H */ diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h deleted file mode 100644 index 2b90d6e..0000000 --- a/include/asm-m68k/serial.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-m68k/serial.h - * - * currently this seems useful only for a Q40, - * it's an almost exact copy of ../asm-alpha/serial.h - * - */ - - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/include/asm-m68k/setup.h b/include/asm-m68k/setup.h deleted file mode 100644 index 4dfb395..0000000 --- a/include/asm-m68k/setup.h +++ /dev/null @@ -1,376 +0,0 @@ -/* -** asm/setup.h -- Definition of the Linux/m68k setup information -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 09/29/92 by Greg Harp -** -** 5/2/94 Roman Hodek: -** Added bi_atari part of the machine dependent union bi_un; for now it -** contains just a model field to distinguish between TT and Falcon. -** 26/7/96 Roman Zippel: -** Renamed to setup.h; added some useful macros to allow gcc some -** optimizations if possible. -** 5/10/96 Geert Uytterhoeven: -** Redesign of the boot information structure; moved boot information -** structure to bootinfo.h -*/ - -#ifndef _M68K_SETUP_H -#define _M68K_SETUP_H - - - - /* - * Linux/m68k Architectures - */ - -#define MACH_AMIGA 1 -#define MACH_ATARI 2 -#define MACH_MAC 3 -#define MACH_APOLLO 4 -#define MACH_SUN3 5 -#define MACH_MVME147 6 -#define MACH_MVME16x 7 -#define MACH_BVME6000 8 -#define MACH_HP300 9 -#define MACH_Q40 10 -#define MACH_SUN3X 11 - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -#define CL_SIZE COMMAND_LINE_SIZE - -#ifndef __ASSEMBLY__ -extern unsigned long m68k_machtype; -#endif /* !__ASSEMBLY__ */ - -#if !defined(CONFIG_AMIGA) -# define MACH_IS_AMIGA (0) -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA) -#else -# define MACH_AMIGA_ONLY -# define MACH_IS_AMIGA (1) -# define MACH_TYPE (MACH_AMIGA) -#endif - -#if !defined(CONFIG_ATARI) -# define MACH_IS_ATARI (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI) -#else -# define MACH_ATARI_ONLY -# define MACH_IS_ATARI (1) -# define MACH_TYPE (MACH_ATARI) -#endif - -#if !defined(CONFIG_MAC) -# define MACH_IS_MAC (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_MAC (m68k_machtype == MACH_MAC) -#else -# define MACH_MAC_ONLY -# define MACH_IS_MAC (1) -# define MACH_TYPE (MACH_MAC) -#endif - -#if defined(CONFIG_SUN3) -#define MACH_IS_SUN3 (1) -#define MACH_SUN3_ONLY (1) -#define MACH_TYPE (MACH_SUN3) -#else -#define MACH_IS_SUN3 (0) -#endif - -#if !defined (CONFIG_APOLLO) -# define MACH_IS_APOLLO (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO) -#else -# define MACH_APOLLO_ONLY -# define MACH_IS_APOLLO (1) -# define MACH_TYPE (MACH_APOLLO) -#endif - -#if !defined (CONFIG_MVME147) -# define MACH_IS_MVME147 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) -# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147) -#else -# define MACH_MVME147_ONLY -# define MACH_IS_MVME147 (1) -# define MACH_TYPE (MACH_MVME147) -#endif - -#if !defined (CONFIG_MVME16x) -# define MACH_IS_MVME16x (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x) -#else -# define MACH_MVME16x_ONLY -# define MACH_IS_MVME16x (1) -# define MACH_TYPE (MACH_MVME16x) -#endif - -#if !defined (CONFIG_BVME6000) -# define MACH_IS_BVME6000 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000) -#else -# define MACH_BVME6000_ONLY -# define MACH_IS_BVME6000 (1) -# define MACH_TYPE (MACH_BVME6000) -#endif - -#if !defined (CONFIG_HP300) -# define MACH_IS_HP300 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_HP300 (m68k_machtype == MACH_HP300) -#else -# define MACH_HP300_ONLY -# define MACH_IS_HP300 (1) -# define MACH_TYPE (MACH_HP300) -#endif - -#if !defined (CONFIG_Q40) -# define MACH_IS_Q40 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_Q40 (m68k_machtype == MACH_Q40) -#else -# define MACH_Q40_ONLY -# define MACH_IS_Q40 (1) -# define MACH_TYPE (MACH_Q40) -#endif - -#if !defined (CONFIG_SUN3X) -# define MACH_IS_SUN3X (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_Q40) || defined(CONFIG_MVME147) -# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X) -#else -# define CONFIG_SUN3X_ONLY -# define MACH_IS_SUN3X (1) -# define MACH_TYPE (MACH_SUN3X) -#endif - -#ifndef MACH_TYPE -# define MACH_TYPE (m68k_machtype) -#endif - -#endif /* __KERNEL__ */ - - - /* - * CPU, FPU and MMU types - * - * Note: we may rely on the following equalities: - * - * CPU_68020 == MMU_68851 - * CPU_68030 == MMU_68030 - * CPU_68040 == FPU_68040 == MMU_68040 - * CPU_68060 == FPU_68060 == MMU_68060 - */ - -#define CPUB_68020 0 -#define CPUB_68030 1 -#define CPUB_68040 2 -#define CPUB_68060 3 - -#define CPU_68020 (1< - -typedef struct siginfo { - int si_signo; - int si_errno; - int si_code; - - union { - int _pad[SI_PAD_SIZE]; - - /* kill() */ - struct { - __kernel_pid_t _pid; /* sender's pid */ - __kernel_uid_t _uid; /* backwards compatibility */ - __kernel_uid32_t _uid32; /* sender's uid */ - } _kill; - - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; - sigval_t _sigval; /* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - __kernel_pid_t _pid; /* sender's pid */ - __kernel_uid_t _uid; /* backwards compatibility */ - sigval_t _sigval; - __kernel_uid32_t _uid32; /* sender's uid */ - } _rt; - - /* SIGCHLD */ - struct { - __kernel_pid_t _pid; /* which child */ - __kernel_uid_t _uid; /* backwards compatibility */ - int _status; /* exit code */ - clock_t _utime; - clock_t _stime; - __kernel_uid32_t _uid32; /* sender's uid */ - } _sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - void *_addr; /* faulting insn/memory ref. */ - } _sigfault; - - /* SIGPOLL */ - struct { - int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ - int _fd; - } _sigpoll; - } _sifields; -} siginfo_t; - -#define UID16_SIGINFO_COMPAT_NEEDED - -/* - * How these fields are to be accessed. - */ -#undef si_uid -#ifdef __KERNEL__ -#define si_uid _sifields._kill._uid32 -#define si_uid16 _sifields._kill._uid -#else -#define si_uid _sifields._kill._uid -#endif - -#ifdef __KERNEL__ - -#include - -static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) -{ - if (from->si_code < 0) - memcpy(to, from, sizeof(*to)); - else - /* _sigchld is currently the largest know union member */ - memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); -} - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-m68k/signal.h b/include/asm-m68k/signal.h deleted file mode 100644 index 3db8a81..0000000 --- a/include/asm-m68k/signal.h +++ /dev/null @@ -1,206 +0,0 @@ -#ifndef _M68K_SIGNAL_H -#define _M68K_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#define __HAVE_ARCH_SIG_BITOPS - -static inline void sigaddset(sigset_t *set, int _sig) -{ - asm ("bfset %0{%1,#1}" - : "+od" (*set) - : "id" ((_sig - 1) ^ 31) - : "cc"); -} - -static inline void sigdelset(sigset_t *set, int _sig) -{ - asm ("bfclr %0{%1,#1}" - : "+od" (*set) - : "id" ((_sig - 1) ^ 31) - : "cc"); -} - -static inline int __const_sigismember(sigset_t *set, int _sig) -{ - unsigned long sig = _sig - 1; - return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW)); -} - -static inline int __gen_sigismember(sigset_t *set, int _sig) -{ - int ret; - asm ("bfextu %1{%2,#1},%0" - : "=d" (ret) - : "od" (*set), "id" ((_sig-1) ^ 31) - : "cc"); - return ret; -} - -#define sigismember(set,sig) \ - (__builtin_constant_p(sig) ? \ - __const_sigismember(set,sig) : \ - __gen_sigismember(set,sig)) - -static inline int sigfindinword(unsigned long word) -{ - asm ("bfffo %1{#0,#0},%0" - : "=d" (word) - : "d" (word & -word) - : "cc"); - return word ^ 31; -} - -struct pt_regs; -extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SIGNAL_H */ diff --git a/include/asm-m68k/socket.h b/include/asm-m68k/socket.h deleted file mode 100644 index dbc64e9..0000000 --- a/include/asm-m68k/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-m68k/sockios.h b/include/asm-m68k/sockios.h deleted file mode 100644 index c04a239..0000000 --- a/include/asm-m68k/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_M68K_SOCKIOS__ -#define __ARCH_M68K_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/include/asm-m68k/spinlock.h b/include/asm-m68k/spinlock.h deleted file mode 100644 index 20f46e2..0000000 --- a/include/asm-m68k/spinlock.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_SPINLOCK_H -#define __M68K_SPINLOCK_H - -#error "m68k doesn't do SMP yet" - -#endif diff --git a/include/asm-m68k/stat.h b/include/asm-m68k/stat.h deleted file mode 100644 index dd38bc2..0000000 --- a/include/asm-m68k/stat.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68K_STAT_H -#define _M68K_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long __unused1; - unsigned long st_mtime; - unsigned long __unused2; - unsigned long st_ctime; - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad1[2]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[2]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif /* _M68K_STAT_H */ diff --git a/include/asm-m68k/statfs.h b/include/asm-m68k/statfs.h deleted file mode 100644 index 08d93f1..0000000 --- a/include/asm-m68k/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include - -#endif /* _M68K_STATFS_H */ diff --git a/include/asm-m68k/string.h b/include/asm-m68k/string.h deleted file mode 100644 index 2eb7df1..0000000 --- a/include/asm-m68k/string.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef _M68K_STRING_H_ -#define _M68K_STRING_H_ - -#include -#include - -static inline size_t __kernel_strlen(const char *s) -{ - const char *sc; - - for (sc = s; *sc++; ) - ; - return sc - s - 1; -} - -static inline char *__kernel_strcpy(char *dest, const char *src) -{ - char *xdest = dest; - - asm volatile ("\n" - "1: move.b (%1)+,(%0)+\n" - " jne 1b" - : "+a" (dest), "+a" (src) - : : "memory"); - return xdest; -} - -#ifndef __IN_STRING_C - -#define __HAVE_ARCH_STRLEN -#define strlen(s) (__builtin_constant_p(s) ? \ - __builtin_strlen(s) : \ - __kernel_strlen(s)) - -#define __HAVE_ARCH_STRNLEN -static inline size_t strnlen(const char *s, size_t count) -{ - const char *sc = s; - - asm volatile ("\n" - "1: subq.l #1,%1\n" - " jcs 2f\n" - " tst.b (%0)+\n" - " jne 1b\n" - " subq.l #1,%0\n" - "2:" - : "+a" (sc), "+d" (count)); - return sc - s; -} - -#define __HAVE_ARCH_STRCPY -#if __GNUC__ >= 4 -#define strcpy(d, s) (__builtin_constant_p(s) && \ - __builtin_strlen(s) <= 32 ? \ - __builtin_strcpy(d, s) : \ - __kernel_strcpy(d, s)) -#else -#define strcpy(d, s) __kernel_strcpy(d, s) -#endif - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - - asm volatile ("\n" - " jra 2f\n" - "1: move.b (%1),(%0)+\n" - " jeq 2f\n" - " addq.l #1,%1\n" - "2: subq.l #1,%2\n" - " jcc 1b\n" - : "+a" (dest), "+a" (src), "+d" (n) - : : "memory"); - return xdest; -} - -#define __HAVE_ARCH_STRCAT -#define strcat(d, s) ({ \ - char *__d = (d); \ - strcpy(__d + strlen(__d), (s)); \ -}) - -#define __HAVE_ARCH_STRCHR -static inline char *strchr(const char *s, int c) -{ - char sc, ch = c; - - for (; (sc = *s++) != ch; ) { - if (!sc) - return NULL; - } - return (char *)s - 1; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *cs, const char *ct) -{ - char res; - - asm ("\n" - "1: move.b (%0)+,%2\n" /* get *cs */ - " cmp.b (%1)+,%2\n" /* compare a byte */ - " jne 2f\n" /* not equal, break out */ - " tst.b %2\n" /* at end of cs? */ - " jne 1b\n" /* no, keep going */ - " jra 3f\n" /* strings are equal */ - "2: sub.b -(%1),%2\n" /* *cs - *ct */ - "3:" - : "+a" (cs), "+a" (ct), "=d" (res)); - return res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *, int, __kernel_size_t); -#define memset(d, c, n) __builtin_memset(d, c, n) - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *, const void *, __kernel_size_t); -#define memcpy(d, s, n) __builtin_memcpy(d, s, n) - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, __kernel_size_t); -#define memcmp(d, s, n) __builtin_memcmp(d, s, n) - -#endif - -#endif /* _M68K_STRING_H_ */ diff --git a/include/asm-m68k/sun3-head.h b/include/asm-m68k/sun3-head.h deleted file mode 100644 index 05af2f1..0000000 --- a/include/asm-m68k/sun3-head.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __SUN3_HEAD_H -#define __SUN3_HEAD_H - -#define KERNBASE 0xE000000 /* First address the kernel will eventually be */ -#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ -#define FC_CONTROL 3 -#define FC_SUPERD 5 -#define FC_CPU 7 - -#endif /* __SUN3_HEAD_H */ diff --git a/include/asm-m68k/sun3_pgalloc.h b/include/asm-m68k/sun3_pgalloc.h deleted file mode 100644 index d4c83f1..0000000 --- a/include/asm-m68k/sun3_pgalloc.h +++ /dev/null @@ -1,102 +0,0 @@ -/* sun3_pgalloc.h -- - * reorganization around 2.3.39, routines moved from sun3_pgtable.h - * - * - * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam) - * - * moved 1/26/2000 Sam Creasey - */ - -#ifndef _SUN3_PGALLOC_H -#define _SUN3_PGALLOC_H - -#include - -/* FIXME - when we get this compiling */ -/* erm, now that it's compiling, what do we do with it? */ -#define _KERNPG_TABLE 0 - -extern const char bad_pmd_string[]; - -#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) - - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long) pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t page) -{ - pgtable_page_dtor(page); - __free_page(page); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), pte); \ -} while (0) - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT); - - if (!page) - return NULL; - - memset((void *)page, 0, PAGE_SIZE); - return (pte_t *) (page); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); - - if (page == NULL) - return NULL; - - clear_highpage(page); - pgtable_page_ctor(page); - return page; - -} - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) -{ - pmd_val(*pmd) = __pa((unsigned long)pte); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) -{ - pmd_val(*pmd) = __pa((unsigned long)page_address(page)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_page((unsigned long) pgd); -} - -static inline pgd_t * pgd_alloc(struct mm_struct *mm) -{ - pgd_t *new_pgd; - - new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL); - memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); - memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT)); - return new_pgd; -} - -#define pgd_populate(mm, pmd, pte) BUG() - -#endif /* SUN3_PGALLOC_H */ diff --git a/include/asm-m68k/sun3_pgtable.h b/include/asm-m68k/sun3_pgtable.h deleted file mode 100644 index f847ec7..0000000 --- a/include/asm-m68k/sun3_pgtable.h +++ /dev/null @@ -1,234 +0,0 @@ -#ifndef _SUN3_PGTABLE_H -#define _SUN3_PGTABLE_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include - -/* - * This file contains all the things which change drastically for the sun3 - * pagetable stuff, to avoid making too much of a mess of the generic m68k - * `pgtable.h'; this should only be included from the generic file. --m - */ - -/* For virtual address to physical address conversion */ -#define VTOP(addr) __pa(addr) -#define PTOV(addr) __va(addr) - - -#endif /* !__ASSEMBLY__ */ - -/* These need to be defined for compatibility although the sun3 doesn't use them */ -#define _PAGE_NOCACHE030 0x040 -#define _CACHEMASK040 (~0x060) -#define _PAGE_NOCACHE_S 0x040 - -/* Page protection values within PTE. */ -#define SUN3_PAGE_VALID (0x80000000) -#define SUN3_PAGE_WRITEABLE (0x40000000) -#define SUN3_PAGE_SYSTEM (0x20000000) -#define SUN3_PAGE_NOCACHE (0x10000000) -#define SUN3_PAGE_ACCESSED (0x02000000) -#define SUN3_PAGE_MODIFIED (0x01000000) - - -/* Externally used page protection values. */ -#define _PAGE_PRESENT (SUN3_PAGE_VALID) -#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED) - -#define PTE_FILE_MAX_BITS 28 - -/* Compound page protection values. */ -//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix... -// is it just PAGE_KERNEL and PAGE_SHARED? -#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_SYSTEM \ - | SUN3_PAGE_NOCACHE \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_MODIFIED) -#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_SYSTEM \ - | SUN3_PAGE_NOCACHE) - -/* - * Page protections for initialising protection_map. The sun3 has only two - * protection settings, valid (implying read and execute) and writeable. These - * are as close as we can get... - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED - -/* Use these fake page-protections on PMDs. */ -#define SUN3_PMD_VALID (0x00000001) -#define SUN3_PMD_MASK (0x0000003F) -#define SUN3_PMD_MAGIC (0x0000002B) - -#ifndef __ASSEMBLY__ - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -#define pmd_set(pmdp,ptep) do {} while (0) - -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -{ - pgd_val(*pgdp) = virt_to_phys(pmdp); -} - -#define __pte_page(pte) \ -((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT)) -#define __pmd_page(pmd) \ -((unsigned long) __va (pmd_val (pmd) & PAGE_MASK)) - -static inline int pte_none (pte_t pte) { return !pte_val (pte); } -static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; } -static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_val (*ptep) = 0; -} - -#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK) -#define pfn_pte(pfn, pgprot) \ -({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; }) - -#define pte_page(pte) virt_to_page(__pte_page(pte)) -#define pmd_page(pmd) virt_to_page(__pmd_page(pmd)) - - -static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); } -#define pmd_none(pmd) pmd_none2(&(pmd)) -//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; } -static inline int pmd_bad2 (pmd_t *pmd) { return 0; } -#define pmd_bad(pmd) pmd_bad2(&(pmd)) -static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; } -/* #define pmd_present(pmd) pmd_present2(&(pmd)) */ -#define pmd_present(pmd) (!pmd_none2(&(pmd))) -static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; } - -static inline int pgd_none (pgd_t pgd) { return 0; } -static inline int pgd_bad (pgd_t pgd) { return 0; } -static inline int pgd_present (pgd_t pgd) { return 1; } -static inline void pgd_clear (pgd_t *pgdp) {} - - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not... - * [we have the full set here even if they don't change from m68k] - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; } -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; } -// use this version when caches work... -//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; } -// until then, use: -static inline pte_t pte_mkcache(pte_t pte) { return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; - -/* Find an entry in a pagetable directory. */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -#define pgd_offset(mm, address) \ -((mm)->pgd + pgd_index(address)) - -/* Find an entry in a kernel pagetable directory. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the second-level pagetable. */ -static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address) -{ - return (pmd_t *) pgd; -} - -static inline unsigned long pte_to_pgoff(pte_t pte) -{ - return pte.pte & SUN3_PAGE_PGNUM_MASK; -} - -static inline pte_t pgoff_to_pte(unsigned off) -{ - pte_t pte = { off + SUN3_PAGE_ACCESSED }; - return pte; -} - - -/* Find an entry in the third-level pagetable. */ -#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) -#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address)) -/* FIXME: should we bother with kmap() here? */ -#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address)) -#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address) -#define pte_unmap(pte) kunmap(pte) -#define pte_unmap_nested(pte) kunmap(pte) - -/* Macros to (de)construct the fake PTEs representing swap pages. */ -#define __swp_type(x) ((x).val & 0x7F) -#define __swp_offset(x) (((x).val) >> 7) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ -#endif /* !_SUN3_PGTABLE_H */ diff --git a/include/asm-m68k/sun3ints.h b/include/asm-m68k/sun3ints.h deleted file mode 100644 index 309d6e6..0000000 --- a/include/asm-m68k/sun3ints.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * sun3ints.h -- Linux/Sun3 interrupt handling code definitions - * - * Erik Verbruggen (erik@bigmama.xtdnet.nl) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef SUN3INTS_H -#define SUN3INTS_H - -#include -#include -#include -#include -#include -#include - -#define SUN3_INT_VECS 192 - -void sun3_enable_irq(unsigned int irq); -void sun3_disable_irq(unsigned int irq); -extern void sun3_init_IRQ (void); -extern void sun3_enable_interrupts (void); -extern void sun3_disable_interrupts (void); -extern volatile unsigned char* sun3_intreg; - -/* master list of VME vectors -- don't fuck with this */ -#define SUN3_VEC_FLOPPY (IRQ_USER+0) -#define SUN3_VEC_VMESCSI0 (IRQ_USER+0) -#define SUN3_VEC_VMESCSI1 (IRQ_USER+1) -#define SUN3_VEC_CG (IRQ_USER+104) - - -#endif /* SUN3INTS_H */ diff --git a/include/asm-m68k/sun3mmu.h b/include/asm-m68k/sun3mmu.h deleted file mode 100644 index d8f17a0..0000000 --- a/include/asm-m68k/sun3mmu.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Definitions for Sun3 custom MMU. - */ -#ifndef __SUN3_MMU_H__ -#define __SUN3_MMU_H__ - -#include -#include -#include - -/* MMU characteristics. */ -#define SUN3_SEGMAPS_PER_CONTEXT 2048 -#define SUN3_PMEGS_NUM 256 -#define SUN3_CONTEXTS_NUM 8 - -#define SUN3_PMEG_SIZE_BITS 17 -#define SUN3_PMEG_SIZE (1 << SUN3_PMEG_SIZE_BITS) -#define SUN3_PMEG_MASK (SUN3_PMEG_SIZE - 1) - -#define SUN3_PTE_SIZE_BITS 13 -#define SUN3_PTE_SIZE (1 << SUN3_PTE_SIZE_BITS) -#define SUN3_PTE_MASK (SUN3_PTE_SIZE - 1) - -#define SUN3_CONTROL_MASK (0x0FFFFFFC) -#define SUN3_INVALID_PMEG 255 -#define SUN3_INVALID_CONTEXT 255 - -#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ -#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ -#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ -#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ -#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ -#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ -#define AC_BUS_ERROR 0x60000000 /* 34 Cleared on read, byte. */ -#define AC_SYNC_ERR 0x60000000 /* c fault type */ -#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ -#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ -#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ -#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ -#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ -#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ -#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ -#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ -#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ - -#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \ - | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED) - -/* Bus access type within PTE. */ -#define SUN3_PAGE_TYPE_MASK (0x0c000000) -#define SUN3_PAGE_TYPE_MEMORY (0x00000000) -#define SUN3_PAGE_TYPE_IO (0x04000000) -#define SUN3_PAGE_TYPE_VME16 (0x08000000) -#define SUN3_PAGE_TYPE_VME32 (0x0c000000) - -/* Mask for page number within PTE. */ -#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF) - -/* Bits within bus-error register. */ -#define SUN3_BUSERR_WATCHDOG (0x01) -#define SUN3_BUSERR_unused (0x02) -#define SUN3_BUSERR_FPAENERR (0x04) -#define SUN3_BUSERR_FPABERR (0x08) -#define SUN3_BUSERR_VMEBERR (0x10) -#define SUN3_BUSERR_TIMEOUT (0x20) -#define SUN3_BUSERR_PROTERR (0x40) -#define SUN3_BUSERR_INVALID (0x80) - -#ifndef __ASSEMBLY__ - -/* Read bus error status register (implicitly clearing it). */ -static inline unsigned char sun3_get_buserr(void) -{ - unsigned char sfc, c; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_BYTE (AC_BUS_ERROR, c); - SET_SFC (sfc); - - return c; -} - -/* Read segmap from hardware MMU. */ -static inline unsigned long sun3_get_segmap(unsigned long addr) -{ - register unsigned long entry; - unsigned char c, sfc; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c); - SET_SFC (sfc); - entry = c; - - return entry; -} - -/* Write segmap to hardware MMU. */ -static inline void sun3_put_segmap(unsigned long addr, unsigned long entry) -{ - unsigned char sfc; - - GET_DFC (sfc); - SET_DFC (FC_CONTROL); - SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_DFC (sfc); - - return; -} - -/* Read PTE from hardware MMU. */ -static inline unsigned long sun3_get_pte(unsigned long addr) -{ - register unsigned long entry; - unsigned char sfc; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_SFC (sfc); - - return entry; -} - -/* Write PTE to hardware MMU. */ -static inline void sun3_put_pte(unsigned long addr, unsigned long entry) -{ - unsigned char sfc; - - GET_DFC (sfc); - SET_DFC (FC_CONTROL); - SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_DFC (sfc); - - return; -} - -/* get current context */ -static inline unsigned char sun3_get_context(void) -{ - unsigned char sfc, c; - - GET_SFC(sfc); - SET_SFC(FC_CONTROL); - GET_CONTROL_BYTE(AC_CONTEXT, c); - SET_SFC(sfc); - - return c; -} - -/* set alternate context */ -static inline void sun3_put_context(unsigned char c) -{ - unsigned char dfc; - GET_DFC(dfc); - SET_DFC(FC_CONTROL); - SET_CONTROL_BYTE(AC_CONTEXT, c); - SET_DFC(dfc); - - return; -} - -extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size, - unsigned long type); - -extern int sun3_map_test(unsigned long addr, char *val); - -#endif /* !__ASSEMBLY__ */ - -#endif /* !__SUN3_MMU_H__ */ diff --git a/include/asm-m68k/sun3x.h b/include/asm-m68k/sun3x.h deleted file mode 100644 index f5691a1..0000000 --- a/include/asm-m68k/sun3x.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef SUN3X_H -#define SUN3X_H - -/* hardware addresses */ -#define SUN3X_IOMMU 0x60000000 -#define SUN3X_ENAREG 0x61000000 -#define SUN3X_INTREG 0x61001400 -#define SUN3X_DIAGREG 0x61001800 -#define SUN3X_ZS1 0x62000000 -#define SUN3X_ZS2 0x62002000 -#define SUN3X_LANCE 0x65002000 -#define SUN3X_EEPROM 0x64000000 -#define SUN3X_IDPROM 0x640007d8 -#define SUN3X_VIDEO_BASE 0x50000000 -#define SUN3X_VIDEO_P4ID 0x50300000 -#define SUN3X_ESP_BASE 0x66000000 -#define SUN3X_ESP_DMA 0x66001000 -#define SUN3X_FDC 0x6e000000 -#define SUN3X_FDC_FCR 0x6e000400 -#define SUN3X_FDC_FVR 0x6e000800 - -/* some NVRAM addresses */ -#define SUN3X_EEPROM_CONS (SUN3X_EEPROM + 0x1f) -#define SUN3X_EEPROM_PORTA (SUN3X_EEPROM + 0x58) -#define SUN3X_EEPROM_PORTB (SUN3X_EEPROM + 0x60) - -#endif diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h deleted file mode 100644 index 32c45f8..0000000 --- a/include/asm-m68k/sun3xflop.h +++ /dev/null @@ -1,263 +0,0 @@ -/* sun3xflop.h: Sun3/80 specific parts of the floppy driver. - * - * Derived partially from asm-sparc/floppy.h, which is: - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net) - */ - -#ifndef __ASM_SUN3X_FLOPPY_H -#define __ASM_SUN3X_FLOPPY_H - -#include -#include -#include -#include -#include - -/* default interrupt vector */ -#define SUN3X_FDC_IRQ 0x40 - -/* some constants */ -#define FCR_TC 0x1 -#define FCR_EJECT 0x2 -#define FCR_MTRON 0x4 -#define FCR_DSEL1 0x8 -#define FCR_DSEL0 0x10 - -/* We don't need no stinkin' I/O port allocation crap. */ -#undef release_region -#undef request_region -#define release_region(X, Y) do { } while(0) -#define request_region(X, Y, Z) (1) - -struct sun3xflop_private { - volatile unsigned char *status_r; - volatile unsigned char *data_r; - volatile unsigned char *fcr_r; - volatile unsigned char *fvr_r; - unsigned char fcr; -} sun3x_fdc; - -/* Super paranoid... */ -#undef HAVE_DISABLE_HLT - -/* Routines unique to each controller type on a Sun. */ -static unsigned char sun3x_82072_fd_inb(int port) -{ - static int once = 0; -// udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to read unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 4: /* FD_STATUS */ - return (*sun3x_fdc.status_r) & ~STATUS_DMA; - case 5: /* FD_DATA */ - return (*sun3x_fdc.data_r); - case 7: /* FD_DIR */ - /* ugly hack, I can't find a way to actually detect the disk */ - if(!once) { - once = 1; - return 0x80; - } - return 0; - }; - panic("sun_82072_fd_inb: How did I get here?"); -} - -static void sun3x_82072_fd_outb(unsigned char value, int port) -{ -// udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to write to unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 2: /* FD_DOR */ - /* Oh geese, 82072 on the Sun has no DOR register, - * so we make do with taunting the FCR. - * - * ASSUMPTIONS: There will only ever be one floppy - * drive attached to a Sun controller - * and it will be at drive zero. - */ - - { - unsigned char fcr = sun3x_fdc.fcr; - - if(value & 0x10) { - fcr |= (FCR_DSEL0 | FCR_MTRON); - } else - fcr &= ~(FCR_DSEL0 | FCR_MTRON); - - - if(fcr != sun3x_fdc.fcr) { - *(sun3x_fdc.fcr_r) = fcr; - sun3x_fdc.fcr = fcr; - } - } - break; - case 5: /* FD_DATA */ - *(sun3x_fdc.data_r) = value; - break; - case 7: /* FD_DCR */ - *(sun3x_fdc.status_r) = value; - break; - case 4: /* FD_STATUS */ - *(sun3x_fdc.status_r) = value; - break; - }; - return; -} - - -asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id) -{ - register unsigned char st; - -#undef TRACE_FLPY_INT -#define NO_FLOPPY_ASSEMBLER - -#ifdef TRACE_FLPY_INT - static int calls=0; - static int bytes=0; - static int dma_wait=0; -#endif - if(!doing_pdma) { - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - -// printk("doing pdma\n");// st %x\n", sun_fdc->status_82072); - -#ifdef TRACE_FLPY_INT - if(!calls) - bytes = virtual_dma_count; -#endif - - { - register int lcount; - register char *lptr; - - for(lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { -/* st=fd_inb(virtual_dma_port+4) & 0x80 ; */ - st = *(sun3x_fdc.status_r); -/* if(st != 0xa0) */ -/* break; */ - - if((st & 0x80) == 0) { - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - return IRQ_HANDLED; - } - - if((st & 0x20) == 0) - break; - - if(virtual_dma_mode) -/* fd_outb(*lptr, virtual_dma_port+5); */ - *(sun3x_fdc.data_r) = *lptr; - else -/* *lptr = fd_inb(virtual_dma_port+5); */ - *lptr = *(sun3x_fdc.data_r); - } - - virtual_dma_count = lcount; - virtual_dma_addr = lptr; -/* st = fd_inb(virtual_dma_port+4); */ - st = *(sun3x_fdc.status_r); - } - -#ifdef TRACE_FLPY_INT - calls++; -#endif -// printk("st=%02x\n", st); - if(st == 0x20) - return IRQ_HANDLED; - if(!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; - doing_pdma = 0; - -#ifdef TRACE_FLPY_INT - printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n", - virtual_dma_count, virtual_dma_residue, calls, bytes, - dma_wait); - calls = 0; - dma_wait=0; -#endif - - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - - -#ifdef TRACE_FLPY_INT - if(!virtual_dma_count) - dma_wait++; -#endif - return IRQ_HANDLED; -} - -static int sun3xflop_request_irq(void) -{ - static int once = 0; - int error; - - if(!once) { - once = 1; - error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, - IRQF_DISABLED, "floppy", NULL); - return ((error == 0) ? 0 : -1); - } else return 0; -} - -static void __init floppy_set_flags(int *ints,int param, int param2); - -static int sun3xflop_init(void) -{ - if(FLOPPY_IRQ < 0x40) - FLOPPY_IRQ = SUN3X_FDC_IRQ; - - sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC; - sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1); - sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR; - sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR; - sun3x_fdc.fcr = 0; - - /* Last minute sanity check... */ - if(*sun3x_fdc.status_r == 0xff) { - return -1; - } - - *sun3x_fdc.fvr_r = FLOPPY_IRQ; - - *sun3x_fdc.fcr_r = FCR_TC; - udelay(10); - *sun3x_fdc.fcr_r = 0; - - /* Success... */ - floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this. - allowed_drive_mask = 0x01; - return (int) SUN3X_FDC; -} - -/* I'm not precisely sure this eject routine works */ -static int sun3x_eject(void) -{ - if(MACH_IS_SUN3X) { - - sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT); - *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; - udelay(10); - sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT); - *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; - } - - return 0; -} - -#define fd_eject(drive) sun3x_eject() - -#endif /* !(__ASM_SUN3X_FLOPPY_H) */ diff --git a/include/asm-m68k/sun3xprom.h b/include/asm-m68k/sun3xprom.h deleted file mode 100644 index 6735efc..0000000 --- a/include/asm-m68k/sun3xprom.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Useful PROM locations */ - -#ifndef SUN3X_PROM_H -#define SUN3X_PROM_H - -extern void (*sun3x_putchar)(int); -extern int (*sun3x_getchar)(void); -extern int (*sun3x_mayget)(void); -extern int (*sun3x_mayput)(int); - -void sun3x_reboot(void); -void sun3x_abort(void); -void sun3x_prom_init(void); -unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size); - -/* interesting hardware locations */ -#define SUN3X_IOMMU 0x60000000 -#define SUN3X_ENAREG 0x61000000 -#define SUN3X_INTREG 0x61001400 -#define SUN3X_DIAGREG 0x61001800 -#define SUN3X_ZS1 0x62000000 -#define SUN3X_ZS2 0x62002000 -#define SUN3X_LANCE 0x65002000 -#define SUN3X_EEPROM 0x64000000 -#define SUN3X_IDPROM 0x640007d8 -#define SUN3X_VIDEO_BASE 0x50400000 -#define SUN3X_VIDEO_REGS 0x50300000 - -/* vector table */ -#define SUN3X_PROM_BASE 0xfefe0000 -#define SUN3X_P_GETCHAR (SUN3X_PROM_BASE + 20) -#define SUN3X_P_PUTCHAR (SUN3X_PROM_BASE + 24) -#define SUN3X_P_MAYGET (SUN3X_PROM_BASE + 28) -#define SUN3X_P_MAYPUT (SUN3X_PROM_BASE + 32) -#define SUN3X_P_REBOOT (SUN3X_PROM_BASE + 96) -#define SUN3X_P_SETLEDS (SUN3X_PROM_BASE + 144) -#define SUN3X_P_ABORT (SUN3X_PROM_BASE + 152) - -/* mapped area */ -#define SUN3X_MAP_START 0xfee00000 -#define SUN3X_MAP_END 0xff000000 - -#endif diff --git a/include/asm-m68k/suspend.h b/include/asm-m68k/suspend.h deleted file mode 100644 index 57b3ddb..0000000 --- a/include/asm-m68k/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SUSPEND_H -#define _M68K_SUSPEND_H - -/* Dummy include. */ - -#endif /* _M68K_SUSPEND_H */ diff --git a/include/asm-m68k/swab.h b/include/asm-m68k/swab.h deleted file mode 100644 index 7221e30..0000000 --- a/include/asm-m68k/swab.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_SWAB_H -#define _M68K_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); - return val; -} -#define __arch_swab32 __arch_swab32 - -#endif /* _M68K_SWAB_H */ diff --git a/include/asm-m68k/system.h b/include/asm-m68k/system.h deleted file mode 100644 index dbb6515..0000000 --- a/include/asm-m68k/system.h +++ /dev/null @@ -1,218 +0,0 @@ -#ifndef _M68K_SYSTEM_H -#define _M68K_SYSTEM_H - -#include -#include -#include -#include - -#ifdef __KERNEL__ - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1 - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) do { \ - register void *_prev __asm__ ("a0") = (prev); \ - register void *_next __asm__ ("a1") = (next); \ - register void *_last __asm__ ("d1"); \ - __asm__ __volatile__("jbsr resume" \ - : "=a" (_prev), "=a" (_next), "=d" (_last) \ - : "0" (_prev), "1" (_next) \ - : "d0", "d2", "d3", "d4", "d5"); \ - (last) = _last; \ -} while (0) - - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() do { asm volatile ("nop"); barrier(); } while (0) -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() ((void)0) -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() ((void)0) - -/* interrupt control.. */ -#if 0 -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#else -#include -#define local_irq_enable() ({ \ - if (MACH_IS_Q40 || !hardirq_count()) \ - asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ -}) -#endif -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -static inline int irqs_disabled(void) -{ - unsigned long flags; - local_save_flags(flags); - return flags & ~ALLOWINT; -} - -/* For spinlocks etc */ -#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); }) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long flags, tmp; - - local_irq_save(flags); - - switch (size) { - case 1: - tmp = *(u8 *)ptr; - *(u8 *)ptr = x; - x = tmp; - break; - case 2: - tmp = *(u16 *)ptr; - *(u16 *)ptr = x; - x = tmp; - break; - case 4: - tmp = *(u32 *)ptr; - *(u32 *)ptr = x; - x = tmp; - break; - default: - BUG(); - } - - local_irq_restore(flags); - return x; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ -#ifdef CONFIG_RMW_INSNS -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ ("casb %0,%2,%1" - : "=d" (old), "=m" (*(char *)p) - : "d" (new), "0" (old), "m" (*(char *)p)); - break; - case 2: - __asm__ __volatile__ ("casw %0,%2,%1" - : "=d" (old), "=m" (*(short *)p) - : "d" (new), "0" (old), "m" (*(short *)p)); - break; - case 4: - __asm__ __volatile__ ("casl %0,%2,%1" - : "=d" (old), "=m" (*(int *)p) - : "d" (new), "0" (old), "m" (*(int *)p)); - break; - } - return old; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#else - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) - -#ifndef CONFIG_SMP -#include -#endif - -#endif - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SYSTEM_H */ diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h deleted file mode 100644 index 8c14170..0000000 --- a/include/asm-m68k/termbits.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __ARCH_M68K_TERMBITS_H__ -#define __ARCH_M68K_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/include/asm-m68k/termios.h b/include/asm-m68k/termios.h deleted file mode 100644 index 0823032..0000000 --- a/include/asm-m68k/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _M68K_TERMIOS_H -#define _M68K_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TERMIOS_H */ diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h deleted file mode 100644 index af0fda4..0000000 --- a/include/asm-m68k/thread_info.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_M68K_THREAD_INFO_H -#define _ASM_M68K_THREAD_INFO_H - -#include -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - unsigned long flags; - struct exec_domain *exec_domain; /* execution domain */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - __u32 cpu; /* should always be 0 on m68k */ - struct restart_block restart_block; -}; - -#define PREEMPT_ACTIVE 0x4000000 - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */ -#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT) - -#define init_thread_info (init_task.thread.info) -#define init_stack (init_thread_union.stack) - -#define task_thread_info(tsk) (&(tsk)->thread.info) -#define task_stack_page(tsk) ((tsk)->stack) -#define current_thread_info() task_thread_info(current) - -#define __HAVE_THREAD_FUNCTIONS - -#define setup_thread_stack(p, org) ({ \ - *(struct task_struct **)(p)->stack = (p); \ - task_thread_info(p)->task = (p); \ -}) - -#define end_of_stack(p) ((unsigned long *)(p)->stack + 1) - -/* entry.S relies on these definitions! - * bits 0-7 are tested at every exception exit - * bits 8-15 are also tested at syscall exit - */ -#define TIF_SIGPENDING 6 /* signal pending */ -#define TIF_NEED_RESCHED 7 /* rescheduling necessary */ -#define TIF_DELAYED_TRACE 14 /* single step a syscall */ -#define TIF_SYSCALL_TRACE 15 /* syscall trace active */ -#define TIF_MEMDIE 16 -#define TIF_FREEZE 17 /* thread is freezing for suspend */ - -#endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/include/asm-m68k/timex.h b/include/asm-m68k/timex.h deleted file mode 100644 index b87f2f2..0000000 --- a/include/asm-m68k/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-m68k/timex.h - * - * m68k architecture timex specifications - */ -#ifndef _ASMm68k_TIMEX_H -#define _ASMm68k_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/include/asm-m68k/tlb.h b/include/asm-m68k/tlb.h deleted file mode 100644 index 1785cff..0000000 --- a/include/asm-m68k/tlb.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _M68K_TLB_H -#define _M68K_TLB_H - -/* - * m68k doesn't need any special per-pte or - * per-vma handling.. - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it - * fills up. - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -#endif /* _M68K_TLB_H */ diff --git a/include/asm-m68k/tlbflush.h b/include/asm-m68k/tlbflush.h deleted file mode 100644 index acb6bf2..0000000 --- a/include/asm-m68k/tlbflush.h +++ /dev/null @@ -1,219 +0,0 @@ -#ifndef _M68K_TLBFLUSH_H -#define _M68K_TLBFLUSH_H - - -#ifndef CONFIG_SUN3 - -#include - -static inline void flush_tlb_kernel_page(void *addr) -{ - if (CPU_IS_040_OR_060) { - mm_segment_t old_fs = get_fs(); - set_fs(KERNEL_DS); - __asm__ __volatile__(".chip 68040\n\t" - "pflush (%0)\n\t" - ".chip 68k" - : : "a" (addr)); - set_fs(old_fs); - } else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr)); -} - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - if (CPU_IS_040_OR_060) - __asm__ __volatile__(".chip 68040\n\t" - "pflushan\n\t" - ".chip 68k"); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #0,#4"); -} - -static inline void __flush_tlb040_one(unsigned long addr) -{ - __asm__ __volatile__(".chip 68040\n\t" - "pflush (%0)\n\t" - ".chip 68k" - : : "a" (addr)); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - if (CPU_IS_040_OR_060) - __flush_tlb040_one(addr); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr)); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - if (CPU_IS_040_OR_060) - __asm__ __volatile__(".chip 68040\n\t" - "pflusha\n\t" - ".chip 68k"); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflusha"); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - if (mm == current->active_mm) - __flush_tlb(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - if (vma->vm_mm == current->active_mm) { - mm_segment_t old_fs = get_fs(); - set_fs(USER_DS); - __flush_tlb_one(addr); - set_fs(old_fs); - } -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - if (vma->vm_mm == current->active_mm) - __flush_tlb(); -} - -static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - flush_tlb_all(); -} - -#else - - -/* Reserved PMEGs. */ -extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM]; -extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM]; -extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM]; -extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM]; - -/* Flush all userspace mappings one by one... (why no flush command, - sun?) */ -static inline void flush_tlb_all(void) -{ - unsigned long addr; - unsigned char ctx, oldctx; - - oldctx = sun3_get_context(); - for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) { - for(ctx = 0; ctx < 8; ctx++) { - sun3_put_context(ctx); - sun3_put_segmap(addr, SUN3_INVALID_PMEG); - } - } - - sun3_put_context(oldctx); - /* erase all of the userspace pmeg maps, we've clobbered them - all anyway */ - for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) { - if(pmeg_alloc[addr] == 1) { - pmeg_alloc[addr] = 0; - pmeg_ctx[addr] = 0; - pmeg_vaddr[addr] = 0; - } - } - -} - -/* Clear user TLB entries within the context named in mm */ -static inline void flush_tlb_mm (struct mm_struct *mm) -{ - unsigned char oldctx; - unsigned char seg; - unsigned long i; - - oldctx = sun3_get_context(); - sun3_put_context(mm->context); - - for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) { - seg = sun3_get_segmap(i); - if(seg == SUN3_INVALID_PMEG) - continue; - - sun3_put_segmap(i, SUN3_INVALID_PMEG); - pmeg_alloc[seg] = 0; - pmeg_ctx[seg] = 0; - pmeg_vaddr[seg] = 0; - } - - sun3_put_context(oldctx); - -} - -/* Flush a single TLB page. In this case, we're limited to flushing a - single PMEG */ -static inline void flush_tlb_page (struct vm_area_struct *vma, - unsigned long addr) -{ - unsigned char oldctx; - unsigned char i; - - oldctx = sun3_get_context(); - sun3_put_context(vma->vm_mm->context); - addr &= ~SUN3_PMEG_MASK; - if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG) - { - pmeg_alloc[i] = 0; - pmeg_ctx[i] = 0; - pmeg_vaddr[i] = 0; - sun3_put_segmap (addr, SUN3_INVALID_PMEG); - } - sun3_put_context(oldctx); - -} -/* Flush a range of pages from TLB. */ - -static inline void flush_tlb_range (struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned char seg, oldctx; - - start &= ~SUN3_PMEG_MASK; - - oldctx = sun3_get_context(); - sun3_put_context(mm->context); - - while(start < end) - { - if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG) - goto next; - if(pmeg_ctx[seg] == mm->context) { - pmeg_alloc[seg] = 0; - pmeg_ctx[seg] = 0; - pmeg_vaddr[seg] = 0; - } - sun3_put_segmap(start, SUN3_INVALID_PMEG); - next: - start += SUN3_PMEG_SIZE; - } -} - -static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - flush_tlb_all(); -} - -/* Flush kernel page from TLB. */ -static inline void flush_tlb_kernel_page (unsigned long addr) -{ - sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG); -} - -#endif - -#endif /* _M68K_TLBFLUSH_H */ diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h deleted file mode 100644 index ca173e9..0000000 --- a/include/asm-m68k/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/include/asm-m68k/traps.h b/include/asm-m68k/traps.h deleted file mode 100644 index 8caef25..0000000 --- a/include/asm-m68k/traps.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * linux/include/asm/traps.h - * - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _M68K_TRAPS_H -#define _M68K_TRAPS_H - -#ifndef __ASSEMBLY__ - -#include -#include - -typedef void (*e_vector)(void); - -asmlinkage void auto_inthandler(void); -asmlinkage void user_inthandler(void); -asmlinkage void bad_inthandler(void); - -extern e_vector vectors[]; - -#endif - -#define VEC_RESETSP (0) -#define VEC_RESETPC (1) -#define VEC_BUSERR (2) -#define VEC_ADDRERR (3) -#define VEC_ILLEGAL (4) -#define VEC_ZERODIV (5) -#define VEC_CHK (6) -#define VEC_TRAP (7) -#define VEC_PRIV (8) -#define VEC_TRACE (9) -#define VEC_LINE10 (10) -#define VEC_LINE11 (11) -#define VEC_RESV12 (12) -#define VEC_COPROC (13) -#define VEC_FORMAT (14) -#define VEC_UNINT (15) -#define VEC_RESV16 (16) -#define VEC_RESV17 (17) -#define VEC_RESV18 (18) -#define VEC_RESV19 (19) -#define VEC_RESV20 (20) -#define VEC_RESV21 (21) -#define VEC_RESV22 (22) -#define VEC_RESV23 (23) -#define VEC_SPUR (24) -#define VEC_INT1 (25) -#define VEC_INT2 (26) -#define VEC_INT3 (27) -#define VEC_INT4 (28) -#define VEC_INT5 (29) -#define VEC_INT6 (30) -#define VEC_INT7 (31) -#define VEC_SYS (32) -#define VEC_TRAP1 (33) -#define VEC_TRAP2 (34) -#define VEC_TRAP3 (35) -#define VEC_TRAP4 (36) -#define VEC_TRAP5 (37) -#define VEC_TRAP6 (38) -#define VEC_TRAP7 (39) -#define VEC_TRAP8 (40) -#define VEC_TRAP9 (41) -#define VEC_TRAP10 (42) -#define VEC_TRAP11 (43) -#define VEC_TRAP12 (44) -#define VEC_TRAP13 (45) -#define VEC_TRAP14 (46) -#define VEC_TRAP15 (47) -#define VEC_FPBRUC (48) -#define VEC_FPIR (49) -#define VEC_FPDIVZ (50) -#define VEC_FPUNDER (51) -#define VEC_FPOE (52) -#define VEC_FPOVER (53) -#define VEC_FPNAN (54) -#define VEC_FPUNSUP (55) -#define VEC_MMUCFG (56) -#define VEC_MMUILL (57) -#define VEC_MMUACC (58) -#define VEC_RESV59 (59) -#define VEC_UNIMPEA (60) -#define VEC_UNIMPII (61) -#define VEC_RESV62 (62) -#define VEC_RESV63 (63) -#define VEC_USER (64) - -#define VECOFF(vec) ((vec)<<2) - -#ifndef __ASSEMBLY__ - -/* Status register bits */ -#define PS_T (0x8000) -#define PS_S (0x2000) -#define PS_M (0x1000) -#define PS_C (0x0001) - -/* bits for 68020/68030 special status word */ - -#define FC (0x8000) -#define FB (0x4000) -#define RC (0x2000) -#define RB (0x1000) -#define DF (0x0100) -#define RM (0x0080) -#define RW (0x0040) -#define SZ (0x0030) -#define DFC (0x0007) - -/* bits for 68030 MMU status register (mmusr,psr) */ - -#define MMU_B (0x8000) /* bus error */ -#define MMU_L (0x4000) /* limit violation */ -#define MMU_S (0x2000) /* supervisor violation */ -#define MMU_WP (0x0800) /* write-protected */ -#define MMU_I (0x0400) /* invalid descriptor */ -#define MMU_M (0x0200) /* ATC entry modified */ -#define MMU_T (0x0040) /* transparent translation */ -#define MMU_NUM (0x0007) /* number of levels traversed */ - - -/* bits for 68040 special status word */ -#define CP_040 (0x8000) -#define CU_040 (0x4000) -#define CT_040 (0x2000) -#define CM_040 (0x1000) -#define MA_040 (0x0800) -#define ATC_040 (0x0400) -#define LK_040 (0x0200) -#define RW_040 (0x0100) -#define SIZ_040 (0x0060) -#define TT_040 (0x0018) -#define TM_040 (0x0007) - -/* bits for 68040 write back status word */ -#define WBV_040 (0x80) -#define WBSIZ_040 (0x60) -#define WBBYT_040 (0x20) -#define WBWRD_040 (0x40) -#define WBLNG_040 (0x00) -#define WBTT_040 (0x18) -#define WBTM_040 (0x07) - -/* bus access size codes */ -#define BA_SIZE_BYTE (0x20) -#define BA_SIZE_WORD (0x40) -#define BA_SIZE_LONG (0x00) -#define BA_SIZE_LINE (0x60) - -/* bus access transfer type codes */ -#define BA_TT_MOVE16 (0x08) - -/* bits for 68040 MMU status register (mmusr) */ -#define MMU_B_040 (0x0800) -#define MMU_G_040 (0x0400) -#define MMU_S_040 (0x0080) -#define MMU_CM_040 (0x0060) -#define MMU_M_040 (0x0010) -#define MMU_WP_040 (0x0004) -#define MMU_T_040 (0x0002) -#define MMU_R_040 (0x0001) - -/* bits in the 68060 fault status long word (FSLW) */ -#define MMU060_MA (0x08000000) /* misaligned */ -#define MMU060_LK (0x02000000) /* locked transfer */ -#define MMU060_RW (0x01800000) /* read/write */ -# define MMU060_RW_W (0x00800000) /* write */ -# define MMU060_RW_R (0x01000000) /* read */ -# define MMU060_RW_RMW (0x01800000) /* read/modify/write */ -# define MMU060_W (0x00800000) /* general write, includes rmw */ -#define MMU060_SIZ (0x00600000) /* transfer size */ -#define MMU060_TT (0x00180000) /* transfer type (TT) bits */ -#define MMU060_TM (0x00070000) /* transfer modifier (TM) bits */ -#define MMU060_IO (0x00008000) /* instruction or operand */ -#define MMU060_PBE (0x00004000) /* push buffer bus error */ -#define MMU060_SBE (0x00002000) /* store buffer bus error */ -#define MMU060_PTA (0x00001000) /* pointer A fault */ -#define MMU060_PTB (0x00000800) /* pointer B fault */ -#define MMU060_IL (0x00000400) /* double indirect descr fault */ -#define MMU060_PF (0x00000200) /* page fault (invalid descr) */ -#define MMU060_SP (0x00000100) /* supervisor protection */ -#define MMU060_WP (0x00000080) /* write protection */ -#define MMU060_TWE (0x00000040) /* bus error on table search */ -#define MMU060_RE (0x00000020) /* bus error on read */ -#define MMU060_WE (0x00000010) /* bus error on write */ -#define MMU060_TTR (0x00000008) /* error caused by TTR translation */ -#define MMU060_BPE (0x00000004) /* branch prediction error */ -#define MMU060_SEE (0x00000001) /* software emulated error */ - -/* cases of missing or invalid descriptors */ -#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \ - MMU060_IL | MMU060_PF) -/* bits that indicate real errors */ -#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \ - MMU060_WP | MMU060_TWE | MMU060_RE | MMU060_WE) - -/* structure for stack frames */ - -struct frame { - struct pt_regs ptregs; - union { - struct { - unsigned long iaddr; /* instruction address */ - } fmt2; - struct { - unsigned long effaddr; /* effective address */ - } fmt3; - struct { - unsigned long effaddr; /* effective address */ - unsigned long pc; /* pc of faulted instr */ - } fmt4; - struct { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ - } fmt7; - struct { - unsigned long iaddr; /* instruction address */ - unsigned short int1[4]; /* internal registers */ - } fmt9; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[2]; - } fmta; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[4]; - unsigned long baddr; /* stage B address */ - unsigned short int4[2]; - unsigned long dibuf; /* data cycle input buffer */ - unsigned short int5[3]; - unsigned ver : 4; /* stack frame version # */ - unsigned int6:12; - unsigned short int7[18]; - } fmtb; - } un; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_TRAPS_H */ diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h deleted file mode 100644 index 6441cb5..0000000 --- a/include/asm-m68k/types.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* DMA addresses are always 32-bits wide */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h deleted file mode 100644 index 7107f3fb..0000000 --- a/include/asm-m68k/uaccess.h +++ /dev/null @@ -1,374 +0,0 @@ -#ifndef __M68K_UACCESS_H -#define __M68K_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* We let the MMU do all checking */ -static inline int access_ok(int type, const void __user *addr, - unsigned long size) -{ - return 1; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int __put_user_bad(void); -extern int __get_user_bad(void); - -#define __put_user_asm(res, x, ptr, bwl, reg, err) \ -asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: moveq.l %3,%0\n" \ - " jra 2b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (res), "=m" (*(ptr)) \ - : #reg (x), "i" (err)) - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -#define __put_user(x, ptr) \ -({ \ - typeof(*(ptr)) __pu_val = (x); \ - int __pu_err = 0; \ - __chk_user_ptr(ptr); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ - break; \ - case 8: \ - { \ - const void __user *__pu_ptr = (ptr); \ - asm volatile ("\n" \ - "1: moves.l %2,(%1)+\n" \ - "2: moves.l %R2,(%1)\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: movel %3,%0\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .long 3b,10b\n" \ - " .previous" \ - : "+d" (__pu_err), "+a" (__pu_ptr) \ - : "r" (__pu_val), "i" (-EFAULT) \ - : "memory"); \ - break; \ - } \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) -#define put_user(x, ptr) __put_user(x, ptr) - - -#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ - type __gu_val; \ - asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub."#bwl" %1,%1\n" \ - " jra 2b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .previous" \ - : "+d" (res), "=&" #reg (__gu_val) \ - : "m" (*(ptr)), "i" (err)); \ - (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \ -}) - -#define __get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ - break; \ - case 2: \ - __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \ - break; \ - case 4: \ - __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ - break; \ -/* case 8: disabled because gcc-4.1 has a broken typeof \ - { \ - const void *__gu_ptr = (ptr); \ - u64 __gu_val; \ - asm volatile ("\n" \ - "1: moves.l (%2)+,%1\n" \ - "2: moves.l (%2),%R1\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub.l %1,%1\n" \ - " sub.l %R1,%R1\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (__gu_err), "=&r" (__gu_val), \ - "+a" (__gu_ptr) \ - : "i" (-EFAULT) \ - : "memory"); \ - (x) = (typeof(*(ptr)))__gu_val; \ - break; \ - } */ \ - default: \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) -#define get_user(x, ptr) __get_user(x, ptr) - -unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n); -unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n); - -#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ - asm volatile ("\n" \ - "1: moves."#s1" (%2)+,%3\n" \ - " move."#s1" %3,(%1)+\n" \ - "2: moves."#s2" (%2)+,%3\n" \ - " move."#s2" %3,(%1)+\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - "3: moves."#s3" (%2)+,%3\n" \ - " move."#s3" %3,(%1)+\n" \ - " .endif\n" \ - "4:\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10f\n" \ - " .long 2b,20f\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " .long 3b,30f\n" \ - " .endif\n" \ - " .previous\n" \ - "\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: clr."#s1" (%1)+\n" \ - "20: clr."#s2" (%1)+\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - "30: clr."#s3" (%1)+\n" \ - " .endif\n" \ - " moveq.l #"#n",%0\n" \ - " jra 4b\n" \ - " .previous\n" \ - : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \ - : : "memory") - -static __always_inline unsigned long -__constant_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long res = 0, tmp; - - switch (n) { - case 1: - __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1); - break; - case 2: - __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2); - break; - case 3: - __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,); - break; - case 4: - __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4); - break; - case 5: - __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,); - break; - case 6: - __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,); - break; - case 7: - __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b); - break; - case 8: - __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,); - break; - case 9: - __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b); - break; - case 10: - __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w); - break; - case 12: - __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l); - break; - default: - /* we limit the inlined version to 3 moves */ - return __generic_copy_from_user(to, from, n); - } - - return res; -} - -#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ - asm volatile ("\n" \ - " move."#s1" (%2)+,%3\n" \ - "11: moves."#s1" %3,(%1)+\n" \ - "12: move."#s2" (%2)+,%3\n" \ - "21: moves."#s2" %3,(%1)+\n" \ - "22:\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " move."#s3" (%2)+,%3\n" \ - "31: moves."#s3" %3,(%1)+\n" \ - "32:\n" \ - " .endif\n" \ - "4:\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 11b,5f\n" \ - " .long 12b,5f\n" \ - " .long 21b,5f\n" \ - " .long 22b,5f\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " .long 31b,5f\n" \ - " .long 32b,5f\n" \ - " .endif\n" \ - " .previous\n" \ - "\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "5: moveq.l #"#n",%0\n" \ - " jra 4b\n" \ - " .previous\n" \ - : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \ - : : "memory") - -static __always_inline unsigned long -__constant_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long res = 0, tmp; - - switch (n) { - case 1: - __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); - break; - case 2: - __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2); - break; - case 3: - __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); - break; - case 4: - __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); - break; - case 5: - __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); - break; - case 6: - __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,); - break; - case 7: - __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b); - break; - case 8: - __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,); - break; - case 9: - __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b); - break; - case 10: - __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w); - break; - case 12: - __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l); - break; - default: - /* limit the inlined version to 3 moves */ - return __generic_copy_to_user(to, from, n); - } - - return res; -} - -#define __copy_from_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_from_user(to, from, n) : \ - __generic_copy_from_user(to, from, n)) - -#define __copy_to_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_to_user(to, from, n) : \ - __generic_copy_to_user(to, from, n)) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_from_user(to, from, n) __copy_from_user(to, from, n) -#define copy_to_user(to, from, n) __copy_to_user(to, from, n) - -long strncpy_from_user(char *dst, const char __user *src, long count); -long strnlen_user(const char __user *src, long n); -unsigned long __clear_user(void __user *to, unsigned long n); - -#define clear_user __clear_user - -#define strlen_user(str) strnlen_user(str, 32767) - -#endif /* _M68K_UACCESS_H */ diff --git a/include/asm-m68k/ucontext.h b/include/asm-m68k/ucontext.h deleted file mode 100644 index e4e2266..0000000 --- a/include/asm-m68k/ucontext.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _M68K_UCONTEXT_H -#define _M68K_UCONTEXT_H - -typedef int greg_t; -#define NGREG 18 -typedef greg_t gregset_t[NGREG]; - -typedef struct fpregset { - int f_fpcntl[3]; - int f_fpregs[8*3]; -} fpregset_t; - -struct mcontext { - int version; - gregset_t gregs; - fpregset_t fpregs; -}; - -#define MCONTEXT_VERSION 2 - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct mcontext uc_mcontext; - unsigned long uc_filler[80]; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/include/asm-m68k/unaligned.h b/include/asm-m68k/unaligned.h deleted file mode 100644 index 77698f2..0000000 --- a/include/asm-m68k/unaligned.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_M68K_UNALIGNED_H -#define _ASM_M68K_UNALIGNED_H - -/* - * The m68k can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_M68K_UNALIGNED_H */ diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h deleted file mode 100644 index 965abb8..0000000 --- a/include/asm-m68k/unistd.h +++ /dev/null @@ -1,374 +0,0 @@ -#ifndef _ASM_M68K_UNISTD_H_ -#define _ASM_M68K_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -#define __NR_vserver 278 -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 - -#ifdef __KERNEL__ - -#define NR_syscalls 329 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* whitelist for checksyscalls */ -#define __IGNORE_restart_syscall - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/include/asm-m68k/user.h b/include/asm-m68k/user.h deleted file mode 100644 index f1f478d..0000000 --- a/include/asm-m68k/user.h +++ /dev/null @@ -1,86 +0,0 @@ -#ifndef _M68K_USER_H -#define _M68K_USER_H - -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ - -struct user_m68kfp_struct { - unsigned long fpregs[8*3]; /* fp0-fp7 registers */ - unsigned long fpcntl[3]; /* fp control regs */ -}; - -/* This is the old layout of "struct pt_regs" as of Linux 1.x, and - is still the layout used by user (the new pt_regs doesn't have - all registers). */ -struct user_regs_struct { - long d1,d2,d3,d4,d5,d6,d7; - long a0,a1,a2,a3,a4,a5,a6; - long d0; - long usp; - long orig_d0; - short stkadj; - short sr; - long pc; - short fmtvec; - short __fill; -}; - - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ -struct user{ -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - struct user_regs_struct regs; /* Where the registers are actually stored */ -/* ptrace does not yet supply these. Someday.... */ - int u_fpvalid; /* True if math co-processor being used. */ - /* for this mess. Not yet used. */ - struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */ -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; /* Used by gdb to help find the values for */ - /* the registers. */ - struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#define NBPG 4096 -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif diff --git a/include/asm-m68k/virtconvert.h b/include/asm-m68k/virtconvert.h deleted file mode 100644 index 22ab05c..0000000 --- a/include/asm-m68k/virtconvert.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __VIRT_CONVERT__ -#define __VIRT_CONVERT__ - -/* - * Macros used for converting between virtual and physical mappings. - */ - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -/* - * Change virtual addresses to physical addresses and vv. - */ -static inline unsigned long virt_to_phys(void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* Permanent address of a page. */ -#ifdef CONFIG_SINGLE_MEMORY_CHUNK -#define page_to_phys(page) \ - __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT)) -#else -#define page_to_phys(_page) ({ \ - struct page *__page = _page; \ - struct pglist_data *pgdat; \ - pgdat = pg_data_table[page_to_nid(__page)]; \ - page_to_pfn(__page) << PAGE_SHIFT; \ -}) -#endif - -/* - * IO bus memory addresses are 1:1 with the physical address, - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -#endif -#endif diff --git a/include/asm-m68k/xor.h b/include/asm-m68k/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/include/asm-m68k/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/zorro.h b/include/asm-m68k/zorro.h deleted file mode 100644 index 5ce97c2..0000000 --- a/include/asm-m68k/zorro.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef _ASM_M68K_ZORRO_H -#define _ASM_M68K_ZORRO_H - -#include - -#define z_readb raw_inb -#define z_readw raw_inw -#define z_readl raw_inl - -#define z_writeb raw_outb -#define z_writew raw_outw -#define z_writel raw_outl - -#define z_memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); -} - -static inline void __iomem *z_remap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void __iomem *z_remap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define z_unmap iounmap -#define z_iounmap iounmap -#define z_ioremap z_remap_nocache_ser - -#endif /* _ASM_M68K_ZORRO_H */ -- cgit v0.10.2 From a3c6018e565dc07cf3738ace6bbe412f97b1bba8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 16 Jan 2009 11:59:33 +0000 Subject: x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 05cfed4..1dbbdf4 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -99,7 +99,6 @@ extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size); * A boot-time mapping is currently limited to at most 16 pages. */ extern void early_ioremap_init(void); -extern void early_ioremap_clear(void); extern void early_ioremap_reset(void); extern void __iomem *early_ioremap(unsigned long offset, unsigned long size); extern void __iomem *early_memremap(unsigned long offset, unsigned long size); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 88f1b10..2cef050 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -138,6 +138,47 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) return pte_offset_kernel(pmd, 0); } +static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd, + unsigned long vaddr, pte_t *lastpte) +{ +#ifdef CONFIG_HIGHMEM + /* + * Something (early fixmap) may already have put a pte + * page here, which causes the page table allocation + * to become nonlinear. Attempt to fix it, and if it + * is still nonlinear then we have to bug. + */ + int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT; + int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT; + + if (pmd_idx_kmap_begin != pmd_idx_kmap_end + && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin + && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end + && ((__pa(pte) >> PAGE_SHIFT) < table_start + || (__pa(pte) >> PAGE_SHIFT) >= table_end)) { + pte_t *newpte; + int i; + + BUG_ON(after_init_bootmem); + newpte = alloc_low_page(); + for (i = 0; i < PTRS_PER_PTE; i++) + set_pte(newpte + i, pte[i]); + + paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT); + set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE)); + BUG_ON(newpte != pte_offset_kernel(pmd, 0)); + __flush_tlb_all(); + + paravirt_release_pte(__pa(pte) >> PAGE_SHIFT); + pte = newpte; + } + BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1) + && vaddr > fix_to_virt(FIX_KMAP_END) + && lastpte && lastpte + PTRS_PER_PTE != pte); +#endif + return pte; +} + /* * This function initializes a certain range of kernel virtual memory * with new bootmem page tables, everywhere page tables are missing in @@ -154,6 +195,7 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base) unsigned long vaddr; pgd_t *pgd; pmd_t *pmd; + pte_t *pte = NULL; vaddr = start; pgd_idx = pgd_index(vaddr); @@ -165,7 +207,8 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base) pmd = pmd + pmd_index(vaddr); for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end); pmd++, pmd_idx++) { - one_page_table_init(pmd); + pte = page_table_kmap_check(one_page_table_init(pmd), + pmd, vaddr, pte); vaddr += PMD_SIZE; } @@ -508,7 +551,6 @@ static void __init early_ioremap_page_table_range_init(pgd_t *pgd_base) * Fixed mappings, only the page table structure has to be * created - mappings will be set by set_fixmap(): */ - early_ioremap_clear(); vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK; page_table_range_init(vaddr, end, pgd_base); @@ -801,7 +843,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse) tables += PAGE_ALIGN(ptes * sizeof(pte_t)); /* for fixmap */ - tables += PAGE_SIZE * 2; + tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t)); /* * RED-PEN putting page tables only on node 0 could diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index bd85d42..af750ab 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -557,34 +557,9 @@ void __init early_ioremap_init(void) } } -void __init early_ioremap_clear(void) -{ - pmd_t *pmd; - - if (early_ioremap_debug) - printk(KERN_INFO "early_ioremap_clear()\n"); - - pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)); - pmd_clear(pmd); - paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT); - __flush_tlb_all(); -} - void __init early_ioremap_reset(void) { - enum fixed_addresses idx; - unsigned long addr, phys; - pte_t *pte; - after_paging_init = 1; - for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) { - addr = fix_to_virt(idx); - pte = early_ioremap_pte(addr); - if (pte_present(*pte)) { - phys = pte_val(*pte) & PAGE_MASK; - set_fixmap(idx, phys); - } - } } static void __init __early_set_fixmap(enum fixed_addresses idx, -- cgit v0.10.2 From 06a279d636734da32bb62dd2f7b0ade666f65d7c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 17 Jan 2009 18:41:37 -0500 Subject: ext4: only use i_size_high for regular files Directories are not allowed to be bigger than 2GB, so don't use i_size_high for anything other than regular files. E2fsck should complain about these inodes, but the simplest thing to do for the kernel is to only use i_size_high for regular files. This prevents an intentially corrupted filesystem from causing the kernel to burn a huge amount of CPU and issuing error messages such as: EXT4-fs warning (device loop0): ext4_block_to_path: block 135090028 > max Thanks to David Maciejak from Fortinet's FortiGuard Global Security Research Team for reporting this issue. http://bugzilla.kernel.org/show_bug.cgi?id=12375 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index c668e43..aafc9eb 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1206,8 +1206,11 @@ static inline void ext4_r_blocks_count_set(struct ext4_super_block *es, static inline loff_t ext4_isize(struct ext4_inode *raw_inode) { - return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | - le32_to_cpu(raw_inode->i_size_lo); + if (S_ISREG(le16_to_cpu(raw_inode->i_mode))) + return ((loff_t)le32_to_cpu(raw_inode->i_size_high) << 32) | + le32_to_cpu(raw_inode->i_size_lo); + else + return (loff_t) le32_to_cpu(raw_inode->i_size_lo); } static inline void ext4_isize_set(struct ext4_inode *raw_inode, loff_t i_size) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a6444ce..49484ba 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -360,9 +360,9 @@ static int ext4_block_to_path(struct inode *inode, final = ptrs; } else { ext4_warning(inode->i_sb, "ext4_block_to_path", - "block %lu > max", + "block %lu > max in inode %lu", i_block + direct_blocks + - indirect_blocks + double_blocks); + indirect_blocks + double_blocks, inode->i_ino); } if (boundary) *boundary = final - 1 - (i_block & (ptrs - 1)); -- cgit v0.10.2 From e6b8bc09ba2075cd91fbffefcd2778b1a00bd76f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:13:40 -0500 Subject: ext4: Add sanity check to make_indexed_dir Make sure the rec_len field in the '..' entry is sane, lest we overrun the directory block and cause a kernel oops on a purposefully corrupted filesystem. Thanks to Sami Liedes for reporting this bug. http://bugzilla.kernel.org/show_bug.cgi?id=12430 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index fec0b4c..ba702bd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1368,7 +1368,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk(KERN_DEBUG "Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext4_journal_get_write_access(handle, bh); if (retval) { ext4_std_error(dir->i_sb, retval); @@ -1377,6 +1377,20 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext4_dir_entry_2 *)((char *)fde + + ext4_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext4_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + + /* Allocate new block for the 0th block's dirents */ bh2 = ext4_append(handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1385,11 +1399,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT4_I(dir)->i_flags |= EXT4_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext4_dir_entry_2 *)((char *)fde + - ext4_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext4_dir_entry_2 *) data1; top = data1 + len; -- cgit v0.10.2 From a21102b55c4f8dfd3adb4a15a34cd62237b46039 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:13:47 -0500 Subject: ext3: Add sanity check to make_indexed_dir Make sure the rec_len field in the '..' entry is sane, lest we overrun the directory block and cause a kernel oops on a purposefully corrupted filesystem. This fixes a bug related to a bug originally reported by Sami Liedes for ext4 at: http://bugzilla.kernel.org/show_bug.cgi?id=12430 Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 69a3d19..4db4ffa 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -1358,7 +1358,7 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, struct fake_dirent *fde; blocksize = dir->i_sb->s_blocksize; - dxtrace(printk("Creating index\n")); + dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); retval = ext3_journal_get_write_access(handle, bh); if (retval) { ext3_std_error(dir->i_sb, retval); @@ -1367,6 +1367,19 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, } root = (struct dx_root *) bh->b_data; + /* The 0th block becomes the root, move the dirents out */ + fde = &root->dotdot; + de = (struct ext3_dir_entry_2 *)((char *)fde + + ext3_rec_len_from_disk(fde->rec_len)); + if ((char *) de >= (((char *) root) + blocksize)) { + ext3_error(dir->i_sb, __func__, + "invalid rec_len for '..' in inode %lu", + dir->i_ino); + brelse(bh); + return -EIO; + } + len = ((char *) root) + blocksize - (char *) de; + bh2 = ext3_append (handle, dir, &block, &retval); if (!(bh2)) { brelse(bh); @@ -1375,11 +1388,6 @@ static int make_indexed_dir(handle_t *handle, struct dentry *dentry, EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; data1 = bh2->b_data; - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + - ext3_rec_len_from_disk(fde->rec_len)); - len = ((char *) root) + blocksize - (char *) de; memcpy (data1, de, len); de = (struct ext3_dir_entry_2 *) data1; top = data1 + len; -- cgit v0.10.2 From 591046cfc5f1b452db0a4557850ad7f394e38231 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Fri, 16 Jan 2009 08:45:45 +1100 Subject: ASoC: atmel_pcm: Remove non-existant header doesn't exist on AVR32 and therefore this driver won't build on that arch. AFAICT this driver doesn't actually use the content of that header so easiest just to remove it. Signed-off-by: Ben Nizette Signed-off-by: Mark Brown diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 1fac5ef..3dcdc4e 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -44,8 +44,6 @@ #include #include -#include - #include "atmel-pcm.h" -- cgit v0.10.2 From 08ec8c3878cea0bf91f2ba3c0badf44b383752d0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 16 Jan 2009 11:57:00 -0500 Subject: jbd2: On a __journal_expect() assertion failure printk "JBD2", not "EXT3-fs" Otherwise it can be very confusing to find a "EXT3-fs: " failure in the middle of EXT4-fs failures, and it makes it harder to track the source of the failure. Signed-off-by: "Theodore Ts'o" diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index b45109c..b28b37e 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -308,7 +308,8 @@ void buffer_assertion_failure(struct buffer_head *bh); int val = (expr); \ if (!val) { \ printk(KERN_ERR \ - "EXT3-fs unexpected failure: %s;\n",# expr); \ + "JBD2 unexpected failure: %s: %s;\n", \ + __func__, #expr); \ printk(KERN_ERR why "\n"); \ } \ val; \ -- cgit v0.10.2 From cc33412fb1f11613e20f9dfc2919a77ecd63fbc4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 12 Jan 2009 17:23:05 +0100 Subject: quota: Improve locking We implement dqget() and dqput() that need neither dqonoff_mutex nor dqptr_sem. Then move dqget() and dqput() calls so that they are not called from under dqptr_sem. This is important because filesystem callbacks aren't called from under dqptr_sem which used to cause *lots* of problems with lock ranking (and with OCFS2 they became close to unsolvable). The patch also removes two functions which were introduced solely because OCFS2 needed them to cope with the old locking scheme. As time showed, they were not enough for OCFS2 anyway and it would be unnecessary work to adapt them to the new locking scheme in which they aren't needed. As a result OCFS2 needs the following patch to compile properly with quotas. Sorry to any bisecters which hit this in advance. Signed-off-by: Jan Kara diff --git a/fs/dquot.c b/fs/dquot.c index 48c0571..bca3cac 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -87,14 +87,17 @@ #define __DQUOT_PARANOIA /* - * There are two quota SMP locks. dq_list_lock protects all lists with quotas - * and quota formats and also dqstats structure containing statistics about the - * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures - * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. + * There are three quota SMP locks. dq_list_lock protects all lists with quotas + * and quota formats, dqstats structure containing statistics about the lists + * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and + * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly - * in inode_add_bytes() and inode_sub_bytes(). + * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects + * modifications of quota state (on quotaon and quotaoff) and readers who care + * about latest values take it as well. * - * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock + * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock, + * dq_list_lock > dq_state_lock * * Note that some things (eg. sb pointer, type, id) doesn't change during * the life of the dquot structure and so needn't to be protected by a lock @@ -103,12 +106,7 @@ * operation is just reading pointers from inode (or not using them at all) the * read lock is enough. If pointers are altered function must hold write lock * (these locking rules also apply for S_NOQUOTA flag in the inode - note that - * for altering the flag i_mutex is also needed). If operation is holding - * reference to dquot in other way (e.g. quotactl ops) it must be guarded by - * dqonoff_mutex. - * This locking assures that: - * a) update/access to dquot pointers in inode is serialized - * b) everyone is guarded against invalidate_dquots() + * for altering the flag i_mutex is also needed). * * Each dquot has its dq_lock mutex. Locked dquots might not be referenced * from inodes (dquot_alloc_space() and such don't check the dq_lock). @@ -122,10 +120,17 @@ * Lock ordering (including related VFS locks) is the following: * i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock > * dqio_mutex + * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem > + * dqptr_sem. But filesystem has to count with the fact that functions such as + * dquot_alloc_space() acquire dqptr_sem and they usually have to be called + * from inside a transaction to keep filesystem consistency after a crash. Also + * filesystems usually want to do some IO on dquot from ->mark_dirty which is + * called with dqptr_sem held. * i_mutex on quota files is special (it's below dqio_mutex) */ static DEFINE_SPINLOCK(dq_list_lock); +static DEFINE_SPINLOCK(dq_state_lock); DEFINE_SPINLOCK(dq_data_lock); static char *quotatypes[] = INITQFNAMES; @@ -428,7 +433,7 @@ static inline void do_destroy_dquot(struct dquot *dquot) * quota is disabled and pointers from inodes removed so there cannot be new * quota users. There can still be some users of quotas due to inodes being * just deleted or pruned by prune_icache() (those are not attached to any - * list). We have to wait for such users. + * list) or parallel quotactl call. We have to wait for such users. */ static void invalidate_dquots(struct super_block *sb, int type) { @@ -600,7 +605,6 @@ static struct shrinker dqcache_shrinker = { /* * Put reference to dquot * NOTE: If you change this function please check whether dqput_blocks() works right... - * MUST be called with either dqptr_sem or dqonoff_mutex held */ void dqput(struct dquot *dquot) { @@ -697,36 +701,30 @@ static struct dquot *get_empty_dquot(struct super_block *sb, int type) } /* - * Check whether dquot is in memory. - * MUST be called with either dqptr_sem or dqonoff_mutex held - */ -int dquot_is_cached(struct super_block *sb, unsigned int id, int type) -{ - unsigned int hashent = hashfn(sb, id, type); - int ret = 0; - - if (!sb_has_quota_active(sb, type)) - return 0; - spin_lock(&dq_list_lock); - if (find_dquot(hashent, sb, id, type) != NODQUOT) - ret = 1; - spin_unlock(&dq_list_lock); - return ret; -} - -/* * Get reference to dquot - * MUST be called with either dqptr_sem or dqonoff_mutex held + * + * Locking is slightly tricky here. We are guarded from parallel quotaoff() + * destroying our dquot by: + * a) checking for quota flags under dq_list_lock and + * b) getting a reference to dquot before we release dq_list_lock */ struct dquot *dqget(struct super_block *sb, unsigned int id, int type) { unsigned int hashent = hashfn(sb, id, type); - struct dquot *dquot, *empty = NODQUOT; + struct dquot *dquot = NODQUOT, *empty = NODQUOT; if (!sb_has_quota_active(sb, type)) return NODQUOT; we_slept: spin_lock(&dq_list_lock); + spin_lock(&dq_state_lock); + if (!sb_has_quota_active(sb, type)) { + spin_unlock(&dq_state_lock); + spin_unlock(&dq_list_lock); + goto out; + } + spin_unlock(&dq_state_lock); + if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) { if (empty == NODQUOT) { spin_unlock(&dq_list_lock); @@ -735,6 +733,7 @@ we_slept: goto we_slept; } dquot = empty; + empty = NODQUOT; dquot->dq_id = id; /* all dquots go on the inuse_list */ put_inuse(dquot); @@ -749,8 +748,6 @@ we_slept: dqstats.cache_hits++; dqstats.lookups++; spin_unlock(&dq_list_lock); - if (empty) - do_destroy_dquot(empty); } /* Wait for dq_lock - after this we know that either dquot_release() is already * finished or it will be canceled due to dq_count > 1 test */ @@ -758,11 +755,15 @@ we_slept: /* Read the dquot and instantiate it (everything done only if needed) */ if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) { dqput(dquot); - return NODQUOT; + dquot = NODQUOT; + goto out; } #ifdef __DQUOT_PARANOIA BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */ #endif +out: + if (empty) + do_destroy_dquot(empty); return dquot; } @@ -1198,63 +1199,76 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space) } /* * Initialize quota pointers in inode - * Transaction must be started at entry + * We do things in a bit complicated way but by that we avoid calling + * dqget() and thus filesystem callbacks under dqptr_sem. */ int dquot_initialize(struct inode *inode, int type) { unsigned int id = 0; int cnt, ret = 0; + struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT }; + struct super_block *sb = inode->i_sb; /* First test before acquiring mutex - solves deadlocks when we * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return 0; - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + /* First get references to structures we might need. */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) { + if (type != -1 && cnt != type) + continue; + switch (cnt) { + case USRQUOTA: + id = inode->i_uid; + break; + case GRPQUOTA: + id = inode->i_gid; + break; + } + got[cnt] = dqget(sb, id, cnt); + } + + down_write(&sb_dqopt(sb)->dqptr_sem); /* Having dqptr_sem we know NOQUOTA flags can't be altered... */ if (IS_NOQUOTA(inode)) goto out_err; for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (type != -1 && cnt != type) continue; + /* Avoid races with quotaoff() */ + if (!sb_has_quota_active(sb, cnt)) + continue; if (inode->i_dquot[cnt] == NODQUOT) { - switch (cnt) { - case USRQUOTA: - id = inode->i_uid; - break; - case GRPQUOTA: - id = inode->i_gid; - break; - } - inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt); + inode->i_dquot[cnt] = got[cnt]; + got[cnt] = NODQUOT; } } out_err: - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + up_write(&sb_dqopt(sb)->dqptr_sem); + /* Drop unused references */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(got[cnt]); return ret; } /* * Release all quotas referenced by inode - * Transaction must be started at an entry */ -int dquot_drop_locked(struct inode *inode) +int dquot_drop(struct inode *inode) { int cnt; + struct dquot *put[MAXQUOTAS]; + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt] != NODQUOT) { - dqput(inode->i_dquot[cnt]); - inode->i_dquot[cnt] = NODQUOT; - } + put[cnt] = inode->i_dquot[cnt]; + inode->i_dquot[cnt] = NODQUOT; } - return 0; -} - -int dquot_drop(struct inode *inode) -{ - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - dquot_drop_locked(inode); up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(put[cnt]); return 0; } @@ -1470,8 +1484,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) qsize_t space; struct dquot *transfer_from[MAXQUOTAS]; struct dquot *transfer_to[MAXQUOTAS]; - int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid, - chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid; + int cnt, ret = QUOTA_OK; + int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid, + chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid; char warntype_to[MAXQUOTAS]; char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS]; @@ -1479,21 +1494,11 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return QUOTA_OK; - /* Clear the arrays */ + /* Initialize the arrays */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - transfer_to[cnt] = transfer_from[cnt] = NODQUOT; + transfer_from[cnt] = NODQUOT; + transfer_to[cnt] = NODQUOT; warntype_to[cnt] = QUOTA_NL_NOWARN; - } - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - /* Now recheck reliably when holding dqptr_sem */ - if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - return QUOTA_OK; - } - /* First build the transfer_to list - here we can block on - * reading/instantiating of dquots. We know that the transaction for - * us was already started so we don't violate lock ranking here */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { switch (cnt) { case USRQUOTA: if (!chuid) @@ -1507,6 +1512,13 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) break; } } + + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Now recheck reliably when holding dqptr_sem */ + if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + goto put_all; + } spin_lock(&dq_data_lock); space = inode_get_bytes(inode); /* Build the transfer_from list and check the limits */ @@ -1517,7 +1529,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) == NO_QUOTA || check_bdq(transfer_to[cnt], space, 0, warntype_to + cnt) == NO_QUOTA) - goto warn_put_all; + goto over_quota; } /* @@ -1545,28 +1557,37 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) inode->i_dquot[cnt] = transfer_to[cnt]; } - ret = QUOTA_OK; -warn_put_all: spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (transfer_from[cnt]) mark_dquot_dirty(transfer_from[cnt]); - if (transfer_to[cnt]) + if (transfer_to[cnt]) { mark_dquot_dirty(transfer_to[cnt]); + /* The reference we got is transferred to the inode */ + transfer_to[cnt] = NODQUOT; + } } +warn_put_all: flush_warnings(transfer_to, warntype_to); flush_warnings(transfer_from, warntype_from_inodes); flush_warnings(transfer_from, warntype_from_space); - +put_all: for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT) - dqput(transfer_from[cnt]); - if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT) - dqput(transfer_to[cnt]); + dqput(transfer_from[cnt]); + dqput(transfer_to[cnt]); } - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; +over_quota: + spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Clear dquot pointers we don't want to dqput() */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + transfer_from[cnt] = NODQUOT; + ret = NO_QUOTA; + goto warn_put_all; } /* Wrapper for transferring ownership of an inode */ @@ -1651,19 +1672,24 @@ int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags) continue; if (flags & DQUOT_SUSPENDED) { + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); } else { + spin_lock(&dq_state_lock); dqopt->flags &= ~dquot_state_flag(flags, cnt); /* Turning off suspended quotas? */ if (!sb_has_quota_loaded(sb, cnt) && sb_has_quota_suspended(sb, cnt)) { dqopt->flags &= ~dquot_state_flag( DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); iput(dqopt->files[cnt]); dqopt->files[cnt] = NULL; continue; } + spin_unlock(&dq_state_lock); } /* We still have to keep quota loaded? */ @@ -1830,7 +1856,9 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, } mutex_unlock(&dqopt->dqio_mutex); mutex_unlock(&inode->i_mutex); + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); add_dquot_ref(sb, type); mutex_unlock(&dqopt->dqonoff_mutex); @@ -1872,9 +1900,11 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) } inode = dqopt->files[type]; dqopt->files[type] = NULL; + spin_lock(&dq_state_lock); flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED, type); dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type); + spin_unlock(&dq_state_lock); mutex_unlock(&dqopt->dqonoff_mutex); flags = dquot_generic_flag(flags, type); @@ -1952,7 +1982,9 @@ int vfs_quota_enable(struct inode *inode, int type, int format_id, ret = -EBUSY; goto out_lock; } + spin_lock(&dq_state_lock); sb_dqopt(sb)->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); out_lock: mutex_unlock(&dqopt->dqonoff_mutex); return ret; @@ -2039,14 +2071,12 @@ int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d { struct dquot *dquot; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); - if (!(dquot = dqget(sb, id, type))) { - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + dquot = dqget(sb, id, type); + if (dquot == NODQUOT) return -ESRCH; - } do_get_dqblk(dquot, di); dqput(dquot); - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + return 0; } @@ -2130,7 +2160,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d struct dquot *dquot; int rc; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); dquot = dqget(sb, id, type); if (!dquot) { rc = -ESRCH; @@ -2139,7 +2168,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d rc = do_set_dqblk(dquot, di); dqput(dquot); out: - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); return rc; } @@ -2370,11 +2398,9 @@ EXPORT_SYMBOL(dquot_release); EXPORT_SYMBOL(dquot_mark_dquot_dirty); EXPORT_SYMBOL(dquot_initialize); EXPORT_SYMBOL(dquot_drop); -EXPORT_SYMBOL(dquot_drop_locked); EXPORT_SYMBOL(vfs_dq_drop); EXPORT_SYMBOL(dqget); EXPORT_SYMBOL(dqput); -EXPORT_SYMBOL(dquot_is_cached); EXPORT_SYMBOL(dquot_alloc_space); EXPORT_SYMBOL(dquot_alloc_inode); EXPORT_SYMBOL(dquot_free_space); diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 21b781a..0b35b3a 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -24,10 +24,8 @@ void sync_dquots(struct super_block *sb, int type); int dquot_initialize(struct inode *inode, int type); int dquot_drop(struct inode *inode); -int dquot_drop_locked(struct inode *inode); struct dquot *dqget(struct super_block *sb, unsigned int id, int type); void dqput(struct dquot *dquot); -int dquot_is_cached(struct super_block *sb, unsigned int id, int type); int dquot_scan_active(struct super_block *sb, int (*fn)(struct dquot *dquot, unsigned long priv), unsigned long priv); -- cgit v0.10.2 From 0db29af1e767464d71b89410d61a1e5b668d0370 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 24 Dec 2008 17:27:04 +0900 Subject: PCI/MSI: bugfix/utilize for msi_capability_init() This patch fix a following bug and does a cleanup. bug: commit 5993760f7fc75b77e4701f1e56dc84c0d6cf18d5 had a wrong change (since is_64 is boolean[0|1]): - pci_write_config_dword(dev, - msi_mask_bits_reg(pos, is_64bit_address(control)), - maskbits); + pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); utilize: Unify separated if (entry->msi_attrib.maskbit) statements. Signed-off-by: Hidetoshi Seto Acked-by: "Jike Song" Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index b4a90ba..896a15d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -398,21 +398,19 @@ static int msi_capability_init(struct pci_dev *dev) entry->msi_attrib.masked = 1; entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ entry->msi_attrib.pos = pos; - if (entry->msi_attrib.maskbit) { - entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos, - entry->msi_attrib.is_64); - } entry->dev = dev; if (entry->msi_attrib.maskbit) { - unsigned int maskbits, temp; + unsigned int base, maskbits, temp; + + base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64); + entry->mask_base = (void __iomem *)(long)base; + /* All MSIs are unmasked by default, Mask them all */ - pci_read_config_dword(dev, - msi_mask_bits_reg(pos, entry->msi_attrib.is_64), - &maskbits); + pci_read_config_dword(dev, base, &maskbits); temp = (1 << multi_msi_capable(control)); temp = ((temp - 1) & ~temp); maskbits |= temp; - pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); + pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; } list_add_tail(&entry->list, &dev->msi_list); -- cgit v0.10.2 From 0fd7e1d8559f45a6838cee93ea49adc0c5bda8f0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 Jan 2009 12:47:47 -0800 Subject: IB/mlx4: Fix memory ordering problem when posting LSO sends The current work request posting code writes the LSO segment before writing any data segments. This leaves a window where the LSO segment overwrites the stamping in one cacheline that the HCA prefetches before the rest of the cacheline is filled with the correct data segments. When the HCA processes this work request, a local protection error may result. Fix this by saving the LSO header size field off and writing it only after all data segments are written. This fix is a cleaned-up version of a patch from Jack Morgenstein . This fixes . Reported-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 39167a7..a91cb4c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1462,7 +1462,8 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg) } static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr, - struct mlx4_ib_qp *qp, unsigned *lso_seg_len) + struct mlx4_ib_qp *qp, unsigned *lso_seg_len, + __be32 *lso_hdr_sz) { unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16); @@ -1479,12 +1480,8 @@ static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr, memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen); - /* make sure LSO header is written before overwriting stamping */ - wmb(); - - wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 | - wr->wr.ud.hlen); - + *lso_hdr_sz = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 | + wr->wr.ud.hlen); *lso_seg_len = halign; return 0; } @@ -1518,6 +1515,9 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int uninitialized_var(stamp); int uninitialized_var(size); unsigned uninitialized_var(seglen); + __be32 dummy; + __be32 *lso_wqe; + __be32 uninitialized_var(lso_hdr_sz); int i; spin_lock_irqsave(&qp->sq.lock, flags); @@ -1525,6 +1525,8 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, ind = qp->sq_next_wqe; for (nreq = 0; wr; ++nreq, wr = wr->next) { + lso_wqe = &dummy; + if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) { err = -ENOMEM; *bad_wr = wr; @@ -1606,11 +1608,12 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, size += sizeof (struct mlx4_wqe_datagram_seg) / 16; if (wr->opcode == IB_WR_LSO) { - err = build_lso_seg(wqe, wr, qp, &seglen); + err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz); if (unlikely(err)) { *bad_wr = wr; goto out; } + lso_wqe = (__be32 *) wqe; wqe += seglen; size += seglen / 16; } @@ -1652,6 +1655,14 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, for (i = wr->num_sge - 1; i >= 0; --i, --dseg) set_data_seg(dseg, wr->sg_list + i); + /* + * Possibly overwrite stamping in cacheline with LSO + * segment only after making sure all data segments + * are written. + */ + wmb(); + *lso_wqe = lso_hdr_sz; + ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? MLX4_WQE_CTRL_FENCE : 0) | size; @@ -1686,7 +1697,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, stamp_send_wqe(qp, stamp, size * 16); ind = pad_wraparound(qp, ind); } - } out: -- cgit v0.10.2 From aa8c6c93747f7b55fa11e1624fec8ca33763a805 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 16 Jan 2009 21:54:43 +0100 Subject: PCI PM: Restore standard config registers of all devices early There is a problem in our handling of suspend-resume of PCI devices that many of them have their standard config registers restored with interrupts enabled and they are put into the full power state with interrupts enabled as well. This may lead to the following scenario: * an interrupt vector is shared between two or more devices * one device is resumed earlier and generates an interrupt * the interrupt handler of another device tries to handle it and attempts to access the device the config space of which hasn't been restored yet and/or which still is in a low power state * the system crashes as a result To prevent this from happening we should restore the standard configuration registers of all devices with interrupts disabled and we should put them into the D0 power state right after that. Unfortunately, this cannot be done using the existing pci_set_power_state(), because it can sleep. Also, to do it we have to make sure that the config spaces of all devices were actually saved during suspend. Signed-off-by: Rafael J. Wysocki Acked-by: Linus Torvalds Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index c697f26..9de07b7 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -355,17 +355,27 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) int i = 0; if (drv && drv->suspend) { + pci_dev->state_saved = false; + i = drv->suspend(pci_dev, state); suspend_report_result(drv->suspend, i); - } else { - pci_save_state(pci_dev); - /* - * This is for compatibility with existing code with legacy PM - * support. - */ - pci_pm_set_unknown_state(pci_dev); + if (i) + return i; + + if (pci_dev->state_saved) + goto Fixup; + + if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0)) + goto Fixup; } + pci_save_state(pci_dev); + /* + * This is for compatibility with existing code with legacy PM support. + */ + pci_pm_set_unknown_state(pci_dev); + + Fixup: pci_fixup_device(pci_fixup_suspend, pci_dev); return i; @@ -386,81 +396,34 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) static int pci_legacy_resume_early(struct device *dev) { - int error = 0; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; - pci_fixup_device(pci_fixup_resume_early, pci_dev); - - if (drv && drv->resume_early) - error = drv->resume_early(pci_dev); - return error; + return drv && drv->resume_early ? + drv->resume_early(pci_dev) : 0; } static int pci_legacy_resume(struct device *dev) { - int error; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; pci_fixup_device(pci_fixup_resume, pci_dev); - if (drv && drv->resume) { - error = drv->resume(pci_dev); - } else { - /* restore the PCI config space */ - pci_restore_state(pci_dev); - error = pci_pm_reenable_device(pci_dev); - } - return error; + return drv && drv->resume ? + drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev); } /* Auxiliary functions used by the new power management framework */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - struct pci_dev *parent = pci_dev->bus->self; - int error = 0; - - /* Check if the device's bus is operational */ - if (!parent || parent->current_state == PCI_D0) { - pci_restore_state(pci_dev); - pci_update_current_state(pci_dev, PCI_D0); - } else { - dev_warn(&pci_dev->dev, "unable to restore config, " - "bridge %s in low power state D%d\n", pci_name(parent), - parent->current_state); - pci_dev->current_state = PCI_UNKNOWN; - error = -EAGAIN; - } - - return error; -} - -static bool pci_is_bridge(struct pci_dev *pci_dev) -{ - return !!(pci_dev->subordinate); -} - static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { - if (pci_restore_standard_config(pci_dev)) - pci_fixup_device(pci_fixup_resume_early, pci_dev); + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); } static int pci_pm_default_resume(struct pci_dev *pci_dev) { - /* - * pci_restore_standard_config() should have been called once already, - * but it would have failed if the device's parent bridge had not been - * in power state D0 at that time. Check it and try again if necessary. - */ - if (pci_dev->current_state == PCI_UNKNOWN) { - int error = pci_restore_standard_config(pci_dev); - if (error) - return error; - } - pci_fixup_device(pci_fixup_resume, pci_dev); if (!pci_is_bridge(pci_dev)) @@ -575,11 +538,11 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->resume_noirq) error = drv->pm->resume_noirq(dev); @@ -730,11 +693,11 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->restore_noirq) error = drv->pm->restore_noirq(dev); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e491fde..17bd932 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -22,7 +22,7 @@ #include /* isa_dma_bridge_buggy */ #include "pci.h" -unsigned int pci_pm_d3_delay = 10; +unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * given PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * @wait: If 'true', wait for the device to change its power state * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) { u16 pmcsr; bool need_restore = false; @@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) { need_restore = true; + wait = true; + } /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + if (!wait) + return 0; + /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(200); + udelay(PCI_PM_D2_DELAY); dev->current_state = state; @@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) if (need_restore) pci_restore_bars(dev); - if (dev->bus->self) + if (wait && dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); return 0; @@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state); + error = pci_raw_set_power_state(dev, state, true); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ @@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev) /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; if ((i = pci_save_pcix_state(dev)) != 0) @@ -1374,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) } /** + * pci_restore_standard_config - restore standard config registers of PCI device + * @dev: PCI device to handle + * + * This function assumes that the device's configuration space is accessible. + * If the device needs to be powered up, the function will wait for it to + * change the state. + */ +int pci_restore_standard_config(struct pci_dev *dev) +{ + pci_power_t prev_state; + int error; + + pci_restore_state(dev); + pci_update_current_state(dev, PCI_D0); + + prev_state = dev->current_state; + if (prev_state == PCI_D0) + return 0; + + error = pci_raw_set_power_state(dev, PCI_D0, false); + if (error) + return error; + + if (pci_is_bridge(dev)) { + if (prev_state > PCI_D1) + mdelay(PCI_PM_BUS_WAIT); + } else { + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; + } + } + + dev->current_state = PCI_D0; + + return 0; +} + +/** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device */ diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1351bb4..26ddf78a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +extern int pci_restore_standard_config(struct pci_dev *dev); + +static inline bool pci_is_bridge(struct pci_dev *pci_dev) +{ + return !!(pci_dev->subordinate); +} extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); diff --git a/include/linux/pci.h b/include/linux/pci.h index 80f8b8b..48890cf 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -117,6 +117,10 @@ typedef int __bitwise pci_power_t; #define PCI_UNKNOWN ((pci_power_t __force) 5) #define PCI_POWER_ERROR ((pci_power_t __force) -1) +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_BUS_WAIT 50 + /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device * has crashed or locked up, this info is reflected here. @@ -252,6 +256,7 @@ struct pci_dev { unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; + unsigned int state_saved:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v0.10.2 From 3c20962086b0ceb5498ba840e5a91bf4a692aae9 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Fri, 16 Jan 2009 13:42:59 -0800 Subject: IPoIB: Do not print error messages for multicast join retries When IPoIB tries to join a multicast group, and the SA module's SM address handle is NULL (because of an SM change, etc), the join returns with -EAGAIN status. In that case, don't print an error message unless multicast debugging is enabled. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 59d02e0b..425e311 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -409,7 +409,7 @@ static int ipoib_mcast_join_complete(int status, } if (mcast->logcount++ < 20) { - if (status == -ETIMEDOUT) { + if (status == -ETIMEDOUT || status == -EAGAIN) { ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n", mcast->mcmember.mgid.raw, status); } else { -- cgit v0.10.2 From ef15aa490f2e447ce04fe643500b814ef40f6ea9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 9 Jan 2009 21:06:30 +0100 Subject: p54: fix oops caused by bad eeproms This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted. BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: p54_assign_address+0x108/0x15d [p54common] Oops: 0002 [#1] SMP Pid: 12988, comm: phy1 Tainted: P W 2.6.28-rc6-wl #3 RIP: 0010: p54_assign_address+0x108/0x15d [p54common] [...] Call Trace: p54_alloc_skb+0xa3/0xc0 [p54common] p54_scan+0x37/0x204 [p54common] [...] Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index c6a370f..3b44e8e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1610,7 +1610,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell) err: printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); - kfree_skb(skb); + p54_free_skb(dev, skb); return -EINVAL; } -- cgit v0.10.2 From b6b50a21625bbf59a89b807dd0fc1eb5412aeff3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 9 Jan 2009 15:25:09 -0800 Subject: mac80211: more kernel-doc fixes Fix (delete) more mac80211 kernel-doc: Warning(linux-2.6.28-git13//include/net/mac80211.h:375): Excess struct/union/enum/typedef member 'retry_count' description in 'ieee80211_tx_info' Warning(linux-2.6.28-git13//net/mac80211/sta_info.h:308): Excess struct/union/enum/typedef member 'last_txrate' description in 'sta_info' Signed-off-by: Randy Dunlap Signed-off-by: John W. Linville diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b3bd00a..559422f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -322,7 +322,6 @@ struct ieee80211_tx_rate { * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers - * @retry_count: number of retries * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index dc2606d..e49a5b9 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -195,7 +195,6 @@ struct sta_ampdu_mlme { * @tx_packets: number of RX/TX MSDUs * @tx_bytes: number of bytes transmitted to this STA * @tx_fragments: number of transmitted MPDUs - * @last_txrate: description of the last used transmit rate * @tid_seq: per-TID sequence numbers for sending to this STA * @ampdu_mlme: A-MPDU state machine state * @timer_to_tid: identity mapping to ID timers -- cgit v0.10.2 From d71038c05970ad0c9d7da6f797803f69e4f91837 Mon Sep 17 00:00:00 2001 From: Andrey Yurovsky Date: Mon, 12 Jan 2009 13:14:27 -0800 Subject: libertas: Fix alignment issues in libertas core Data structures that come over the wire from the WLAN firmware must be packed. This fixes alignment problems on the blackfin architecture and, reportedly, on the AVR32. This is a replacement for the previous version of this patch which had also explicitly used get_unaligned_ macros. As Johannes Berg pointed out, these macros were unnecessary. Signed-off-by: Andrey Yurovsky Signed-off-by: Colin McCabe Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index e173b1b..f6a79a6 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -32,7 +32,7 @@ struct txpd { u8 pktdelay_2ms; /* reserved */ u8 reserved1; -}; +} __attribute__ ((packed)); /* RxPD Descriptor */ struct rxpd { @@ -63,7 +63,7 @@ struct rxpd { /* Pkt Priority */ u8 priority; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_header { __le16 command; @@ -97,7 +97,7 @@ struct enc_key { struct lbs_offset_value { u32 offset; u32 value; -}; +} __attribute__ ((packed)); /* Define general data structure */ /* cmd_DS_GEN */ @@ -107,7 +107,7 @@ struct cmd_ds_gen { __le16 seqnum; __le16 result; void *cmdresp[0]; -}; +} __attribute__ ((packed)); #define S_DS_GEN sizeof(struct cmd_ds_gen) @@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event { * bump this up a bit. */ uint8_t tlv[128]; -}; +} __attribute__ ((packed)); /* * This scan handle Country Information IE(802.11d compliant) @@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan { mrvlietypes_chanlistparamset_t ChanListParamSet; mrvlietypes_ratesparamset_t OpRateSet; #endif -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_scan_rsp { struct cmd_header hdr; @@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp { __le16 bssdescriptsize; uint8_t nr_sets; uint8_t bssdesc_and_tlvbuffer[0]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_log { struct cmd_header hdr; @@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log { __le32 fcserror; __le32 txframe; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_control { struct cmd_header hdr; __le16 action; u16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_multicast_adr { struct cmd_header hdr; __le16 action; __le16 nr_of_adrs; u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_authenticate { u8 macaddr[ETH_ALEN]; u8 authtype; u8 reserved[10]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_deauthenticate { struct cmd_header hdr; u8 macaddr[ETH_ALEN]; __le16 reasoncode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_associate { u8 peerstaaddr[6]; @@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate { struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep { /* 40, 128bit or TXWEP */ uint8_t keytype[4]; uint8_t keymaterial[4][16]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_3_get_stat { __le32 xmitok; @@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat { __le32 rcverror; __le32 rcvnobuffer; __le32 rcvcrcerror; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_stat { __le32 txfragmentcnt; @@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat { __le32 txbeacon; __le32 rxbeacon; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_snmp_mib { struct cmd_header hdr; @@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib { __le16 oid; __le16 bufsize; u8 value[128]; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_map { __le16 buffersize; u8 regmap[64]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_access { __le16 action; __le16 offset; __le32 value; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_radio_control { struct cmd_header hdr; __le16 action; __le16 control; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_beacon_control { __le16 action; __le16 beacon_enable; __le16 beacon_period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_params { struct cmd_header hdr; @@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params { /* reserved field, should be set to zero */ __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_inactivity_timeout { struct cmd_header hdr; @@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout { /* Inactivity timeout in msec */ __le16 timeout; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_channel { struct cmd_header hdr; @@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel { __le16 rftype; /* unused */ __le16 reserved; /* unused */ u8 channellist[32]; /* unused */ -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi { /* weighting factor */ @@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi { __le16 reserved_0; __le16 reserved_1; __le16 reserved_2; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi_rsp { __le16 SNR; __le16 noisefloor; __le16 avgSNR; __le16 avgnoisefloor; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_mac_address { struct cmd_header hdr; __le16 action; u8 macadd[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_tx_power { struct cmd_header hdr; @@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power { __le16 curlevel; s8 maxlevel; s8 minlevel; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_antenna { __le16 action; @@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna { /* Number of antennas or 0xffff(diversity) */ __le16 antennamode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_monitor_mode { __le16 action; __le16 mode; -}; +} __attribute__ ((packed)); struct cmd_ds_set_boot2_ver { struct cmd_header hdr; __le16 action; __le16 version; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_fw_wake_method { struct cmd_header hdr; __le16 action; __le16 method; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_period { struct cmd_header hdr; __le16 action; __le16 period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ps_mode { __le16 action; @@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_confirm_sleep { struct cmd_header hdr; @@ -483,7 +483,7 @@ struct cmd_confirm_sleep { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_data_rate { struct cmd_header hdr; @@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate { __le16 action; __le16 reserved; u8 rates[MAX_RATES]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rate_adapt_rateset { struct cmd_header hdr; __le16 action; __le16 enablehwauto; __le16 bitmap; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_start { struct cmd_header hdr; @@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result { u8 pad[3]; u8 bssid[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct adhoc_bssdesc { u8 bssid[ETH_ALEN]; @@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet { /* key material of size keylen */ u8 key[32]; -}; +} __attribute__ ((packed)); #define MAX_WOL_RULES 16 @@ -590,7 +590,7 @@ struct host_wol_rule { __le16 reserve; __be32 sig_mask; __be32 signature; -}; +} __attribute__ ((packed)); struct wol_config { uint8_t action; @@ -598,8 +598,7 @@ struct wol_config { uint8_t no_rules_in_cmd; uint8_t result; struct host_wol_rule rule[MAX_WOL_RULES]; -}; - +} __attribute__ ((packed)); struct cmd_ds_host_sleep { struct cmd_header hdr; -- cgit v0.10.2 From b657eade2f98b5c689e405bd6e4e445471066380 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 13 Jan 2009 14:33:49 +0200 Subject: ath9k: Fix an operator typo in phy rate validation This was not supposed to be a bitwise AND operation, but a check of two separate conditions. Anyway, the old code happened to result in the same behavior, so this is just changing the code to be easier to understand and also to keep sparse from warning about dubious operators. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 04ab457..1b71b93 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) { - if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG)) + if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) return 0; if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) return 0; -- cgit v0.10.2 From 9d97f2e55e3df44e3b6b4cc58b091501ba7ee0ac Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 13 Jan 2009 14:35:08 +0200 Subject: ath9k: Fix an operator typo in REG_DOMAIN_2GHZ_MASK Incorrect operator causes the REG_DOMAIN_2GHZ_MASK to be zero which surely was not the goal of this definition. Mask out the 11a flags correctly. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h index 9112c03..6df1b3b 100644 --- a/drivers/net/wireless/ath9k/regd_common.h +++ b/drivers/net/wireless/ath9k/regd_common.h @@ -228,7 +228,7 @@ enum { }; #define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \ - (!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) + (~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) #define REG_DOMAIN_5GHZ_MASK REQ_MASK static struct reg_dmn_pair_mapping regDomainPairs[] = { -- cgit v0.10.2 From 73e1a65d3c4a013f6fa56e47133be95143a75fe3 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 8 Jan 2009 10:19:58 -0800 Subject: iwlwifi: remove CMD_WANT_SKB flag if send_cmd_sync failure In function iwl_send_cmd_sync(), if the flag CMD_WANT_SKB is set but we are not provided with a valid SKB (cmd->meta.u.skb == NULL), we need to remove the CMD_WANT_SKB flag from the TX cmd queue. Otherwise in case the cmd comes in later, it will possibly set an invalid address. Thus it causes an invalid memory access. This fixed the bug http://bugzilla.kernel.org/show_bug.cgi?id=11326. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8c71ad4..4b35b30 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d645808..15f5655 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_ IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; -- cgit v0.10.2 From a92a3ce72483d7f0902dff8a3be8cdcee215a37c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 7 Jan 2009 17:43:33 -0800 Subject: cfg80211: make handle_band() and handle_channel() wiphy specific This allows us to make more wiphy specific judgements when handling the channels later on. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4f87753..af805b0 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -778,13 +778,22 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, return !max_bandwidth; } -static void handle_channel(struct ieee80211_channel *chan) +static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, + unsigned int chan_idx) { int r; - u32 flags = chan->orig_flags; + u32 flags; u32 max_bandwidth = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + + sband = wiphy->bands[band]; + BUG_ON(chan_idx >= sband->n_channels); + chan = &sband->channels[chan_idx]; + + flags = chan->orig_flags; r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), &max_bandwidth, ®_rule); @@ -808,12 +817,16 @@ static void handle_channel(struct ieee80211_channel *chan) chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band(struct ieee80211_supported_band *sband) +static void handle_band(struct wiphy *wiphy, enum ieee80211_band band) { - int i; + unsigned int i; + struct ieee80211_supported_band *sband; + + BUG_ON(!wiphy->bands[band]); + sband = wiphy->bands[band]; for (i = 0; i < sband->n_channels; i++) - handle_channel(&sband->channels[i]); + handle_channel(wiphy, band, i); } static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby) @@ -840,7 +853,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) enum ieee80211_band band; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) - handle_band(wiphy->bands[band]); + handle_band(wiphy, band); if (wiphy->reg_notifier) wiphy->reg_notifier(wiphy, setby); } -- cgit v0.10.2 From 0c7dc45d21de6ae212b5ccb7cdff5beff795ccf0 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 7 Jan 2009 17:43:36 -0800 Subject: cfg80211: Fix regression with 11d on bands This fixes a regression on disallowing bands introduced with the new 802.11d support. The issue is that IEEE-802.11 allows APs to send a subset of what a country regulatory domain defines. This was clarified in this document: http://tinyurl.com/11d-clarification As such it is possible, and this is what is done in practice, that a single band 2.4 GHz AP will only send 2.4 GHz band regulatory information through the 802.11 country information element and then the current intersection with what CRDA provided yields a regulatory domain with no 5 GHz information -- even though that country may actually allow 5 GHz operation. We correct this by only applying the intersection rules on a channel if the the intersection yields a regulatory rule on the same band the channel is on. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index af805b0..5f6d20d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -421,6 +421,31 @@ static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, return 0; } +/** + * freq_in_rule_band - tells us if a frequency is in a frequency band + * @freq_range: frequency rule we want to query + * @freq_khz: frequency we are inquiring about + * + * This lets us know if a specific frequency rule is or is not relevant to + * a specific frequency's band. Bands are device specific and artificial + * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is + * safe for now to assume that a frequency rule should not be part of a + * frequency's band if the start freq or end freq are off by more than 2 GHz. + * This resolution can be lowered and should be considered as we add + * regulatory rule support for other "bands". + **/ +static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, + u32 freq_khz) +{ +#define ONE_GHZ_IN_KHZ 1000000 + if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) + return true; + if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) + return true; + return false; +#undef ONE_GHZ_IN_KHZ +} + /* Converts a country IE to a regulatory domain. A regulatory domain * structure has a lot of information which the IE doesn't yet have, * so for the other values we use upper max values as we will intersect @@ -748,12 +773,23 @@ static u32 map_regdom_flags(u32 rd_flags) * this value to the maximum allowed bandwidth. * @reg_rule: the regulatory rule which we have for this frequency * - * Use this function to get the regulatory rule for a specific frequency. + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. */ static int freq_reg_info(u32 center_freq, u32 *bandwidth, const struct ieee80211_reg_rule **reg_rule) { int i; + bool band_rule_found = false; u32 max_bandwidth = 0; if (!cfg80211_regdomain) @@ -767,7 +803,15 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, rr = &cfg80211_regdomain->reg_rules[i]; fr = &rr->freq_range; pr = &rr->power_rule; + + /* We only need to know if one frequency rule was + * was in center_freq's band, that's enough, so lets + * not overwrite it once found */ + if (!band_rule_found) + band_rule_found = freq_in_rule_band(fr, center_freq); + max_bandwidth = freq_max_bandwidth(fr, center_freq); + if (max_bandwidth && *bandwidth <= max_bandwidth) { *reg_rule = rr; *bandwidth = max_bandwidth; @@ -775,6 +819,9 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, } } + if (!band_rule_found) + return -ERANGE; + return !max_bandwidth; } @@ -799,8 +846,37 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, &max_bandwidth, ®_rule); if (r) { - flags |= IEEE80211_CHAN_DISABLED; - chan->flags = flags; + /* This means no regulatory rule was found in the country IE + * with a frequency range on the center_freq's band, since + * IEEE-802.11 allows for a country IE to have a subset of the + * regulatory information provided in a country we ignore + * disabling the channel unless at least one reg rule was + * found on the center_freq's band. For details see this + * clarification: + * + * http://tinyurl.com/11d-clarification + */ + if (r == -ERANGE && + last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { +#ifdef CONFIG_CFG80211_REG_DEBUG + printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz " + "intact on %s - no rule found in band on " + "Country IE\n", + chan->center_freq, wiphy_name(wiphy)); +#endif + } else { + /* In this case we know the country IE has at least one reg rule + * for the band so we respect its band definitions */ +#ifdef CONFIG_CFG80211_REG_DEBUG + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + printk(KERN_DEBUG "cfg80211: Disabling " + "channel %d MHz on %s due to " + "Country IE\n", + chan->center_freq, wiphy_name(wiphy)); +#endif + flags |= IEEE80211_CHAN_DISABLED; + chan->flags = flags; + } return; } -- cgit v0.10.2 From 02e68a3da0fbdb178cdec54b7db48edeefd1691d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 7 Jan 2009 17:43:37 -0800 Subject: cfg80211: Fix parsed country IE info for 5 GHz The country IE number of channels on 5 GHz specifies the number of 5 GHz channels, not the number of sequential channel numbers. For example, if in a country IEs if the first channel given is 36 and the number of channels passed is 4 then the individual channel numbers defined for the 5 GHz PHY by these parameters are: 36, 40, 44, 48 not: 36, 37, 38, 39 See: http://tinyurl.com/11d-clarification Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 5f6d20d..bc494ce 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -563,6 +563,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( /* This time around we fill in the rd */ while (country_ie_len >= 3) { + int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = (struct ieee80211_country_ie_triplet *) country_ie; struct ieee80211_reg_rule *reg_rule = NULL; @@ -584,6 +585,23 @@ static struct ieee80211_regdomain *country_ie_2_rd( reg_rule->flags = flags; + /* 2 GHz */ + if (triplet->chans.first_channel <= 14) + end_channel = triplet->chans.first_channel + + triplet->chans.num_channels; + else + /* + * 5 GHz -- For example in country IEs if the first + * channel given is 36 and the number of channels is 4 + * then the individual channel numbers defined for the + * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 + * and not 36, 37, 38, 39. + * + * See: http://tinyurl.com/11d-clarification + */ + end_channel = triplet->chans.first_channel + + (4 * (triplet->chans.num_channels - 1)); + /* The +10 is since the regulatory domain expects * the actual band edge, not the center of freq for * its start and end freqs, assuming 20 MHz bandwidth on @@ -593,8 +611,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( triplet->chans.first_channel) - 10); freq_range->end_freq_khz = MHZ_TO_KHZ(ieee80211_channel_to_frequency( - triplet->chans.first_channel + - triplet->chans.num_channels) + 10); + end_channel) + 10); /* Large arbitrary values, we intersect later */ /* Increment this if we ever support >= 40 MHz channels -- cgit v0.10.2 From e223b6dc051ad030a70d5c6ed6226b95bdfc3af7 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 14 Jan 2009 00:00:13 +0200 Subject: rt2x00: fix a wrong parameter for __test_and_clear_bit() in rt2x00rfkill_free(). When running modprobe rt73usb, and then rmmod rt73usb, and then iwconfig, the wlan0 device does not disappear. When repeating this process again, we get a kernel Oops errors and "BUG: unable to handle kernel paging request..." message in the kernel log. The reason for this is that there is an error in rt2x00rfkill_free(), which is called in the process of removing the device (rt2x00lib_remove_dev() in rt2x00dev.c). rt2x00rfkill_free() clears the RFKILL_STATE_ALLOCATED bit , which is bit number 1 () in rt2x00dev->flags instead of in rt2x00dev->rfkill_state. As a result, when checking the DEVICE_STATE_REGISTERED_HW bit (bit number 1 in rt2x00dev->flags) in rt2x00lib_remove_hw() it is **unset**, and we wrongly **don't** call ieee80211_unregister_hw(). This patch corrects this: the parameter for __test_and_clear_bit() in rt2x00rfkill_free() should be &rt2x00dev->rfkill_state and not &rt2x00dev->flags. Signed-off-by: Rami Rosen Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index c3f53a9..3298cae 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; cancel_delayed_work_sync(&rt2x00dev->rfkill_work); -- cgit v0.10.2 From 275719089bfe7dbf446b72c3e520966e7fa42b6a Mon Sep 17 00:00:00 2001 From: Artur Skawina Date: Thu, 15 Jan 2009 21:07:03 +0100 Subject: p54: set_tim must be atomic. Fix for: BUG: scheduling while atomic: named/2004/0x10000200 Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45 Call Trace: [] schedule+0x2a7/0x320 [] __alloc_skb+0x34/0x110 [] __cond_resched+0x13/0x30 [] _cond_resched+0x2d/0x40 [] kmem_cache_alloc+0x95/0xc0 [] check_object+0xc4/0x230 [] __alloc_skb+0x34/0x110 [] p54_alloc_skb+0x71/0xf0 [] p54_set_tim+0x3f/0xa0 [] sta_info_set_tim_bit+0x64/0x80 [] invoke_tx_handlers+0xd57/0xd80 [] free_debug_processing+0x197/0x210 [] pskb_expand_head+0xf5/0x170 [] __ieee80211_tx_prepare+0x164/0x2f0 [] ieee80211_skb_resize+0x6d/0xe0 [] ieee80211_master_start_xmit+0x23f/0x550 [] __slab_alloc+0x2b8/0x4f0 [] getnstimeofday+0x51/0x120 [] dev_hard_start_xmit+0x1db/0x240 [] __qdisc_run+0x1ab/0x200 [] __run_hrtimer+0x31/0xf0 [] dev_queue_xmit+0x247/0x500 [] ieee80211_subif_start_xmit+0x356/0x7d0 [] packet_rcv_spkt+0x37/0x150 [] packet_rcv_spkt+0x37/0x150 [] dev_hard_start_xmit+0x1db/0x240 [] __qdisc_run+0x1ab/0x200 [] dev_queue_xmit+0x247/0x500 [] neigh_resolve_output+0xe2/0x200 [] ip_finish_output+0x0/0x290 [] ip_finish_output+0x1e7/0x290 [] ip_local_out+0x15/0x20 [] ip_push_pending_frames+0x272/0x380 [] udp_push_pending_frames+0x146/0x3a0 [] udp_sendmsg+0x2fa/0x6b0 [] inet_sendmsg+0x37/0x70 [] sock_sendmsg+0xbe/0x100 [] autoremove_wake_function+0x0/0x50 [] __wake_up_common+0x43/0x70 [] copy_from_user+0x32/0x130 [] copy_from_user+0x32/0x130 [] verify_iovec+0x2e/0xb0 [] sys_sendmsg+0x17f/0x290 [] pipe_write+0x29a/0x570 [] update_wall_time+0x492/0x8e0 [] getnstimeofday+0x51/0x120 [] sched_slice+0x3d/0x80 [] getnstimeofday+0x51/0x120 [] hrtimer_forward+0x147/0x1a0 [] lapic_next_event+0x10/0x20 [] clockevents_program_event+0xa3/0x170 [] sys_socketcall+0xa4/0x290 [] smp_apic_timer_interrupt+0x40/0x70 [] sysenter_do_call+0x12/0x25 Signed-off-by: Artur Skawina Acked-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 3b44e8e..ae31e37 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1147,7 +1147,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(struct p54_hdr) + sizeof(*tim), - P54_CONTROL_TYPE_TIM, GFP_KERNEL); + P54_CONTROL_TYPE_TIM, GFP_ATOMIC); if (!skb) return -ENOMEM; -- cgit v0.10.2 From 674743033c1ae9f7cc94e1e0037f6f719e6d1d67 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 16 Jan 2009 19:46:28 +0100 Subject: p54: fix p54_set_key's return code p54 doesn't support AES-128-CMAC offload. This patch will fix the noisy mac80211 warnings, when 802.11w is enabled: mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22) mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22) Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index ae31e37..12d0717 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2077,7 +2077,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, algo = P54_CRYPTO_AESCCMP; break; default: - return -EINVAL; + return -EOPNOTSUPP; } } -- cgit v0.10.2 From 3750f60557b68776eb749859ad68af70d1a01ad0 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 16 Jan 2009 14:55:28 -0800 Subject: IB/ehca: Fix printk format warnings from u64 type change Commit fe333321 ("powerpc: Change u64/s64 to a long long integer type") changed u64 from unsigned long to unsigned long long, which means that printk formats for printing u64 values should use "ll" instead of "l" to avoid warnings. Fix all the places affected by this in ehca. Signed-off-by: Stephen Rothwell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c index 2f4c28a..97e4b23 100644 --- a/drivers/infiniband/hw/ehca/ehca_cq.c +++ b/drivers/infiniband/hw/ehca/ehca_cq.c @@ -196,7 +196,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (h_ret != H_SUCCESS) { ehca_err(device, "hipz_h_alloc_resource_cq() failed " - "h_ret=%li device=%p", h_ret, device); + "h_ret=%lli device=%p", h_ret, device); cq = ERR_PTR(ehca2ib_return_code(h_ret)); goto create_cq_exit2; } @@ -232,7 +232,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (h_ret < H_SUCCESS) { ehca_err(device, "hipz_h_register_rpage_cq() failed " - "ehca_cq=%p cq_num=%x h_ret=%li counter=%i " + "ehca_cq=%p cq_num=%x h_ret=%lli counter=%i " "act_pages=%i", my_cq, my_cq->cq_number, h_ret, counter, param.act_pages); cq = ERR_PTR(-EINVAL); @@ -244,7 +244,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if ((h_ret != H_SUCCESS) || vpage) { ehca_err(device, "Registration of pages not " "complete ehca_cq=%p cq_num=%x " - "h_ret=%li", my_cq, my_cq->cq_number, + "h_ret=%lli", my_cq, my_cq->cq_number, h_ret); cq = ERR_PTR(-EAGAIN); goto create_cq_exit4; @@ -252,7 +252,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, } else { if (h_ret != H_PAGE_REGISTERED) { ehca_err(device, "Registration of page failed " - "ehca_cq=%p cq_num=%x h_ret=%li " + "ehca_cq=%p cq_num=%x h_ret=%lli " "counter=%i act_pages=%i", my_cq, my_cq->cq_number, h_ret, counter, param.act_pages); @@ -266,7 +266,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, gal = my_cq->galpas.kernel; cqx_fec = hipz_galpa_load(gal, CQTEMM_OFFSET(cqx_fec)); - ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%lx", + ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%llx", my_cq, my_cq->cq_number, cqx_fec); my_cq->ib_cq.cqe = my_cq->nr_of_entries = @@ -307,7 +307,7 @@ create_cq_exit3: h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 1); if (h_ret != H_SUCCESS) ehca_err(device, "hipz_h_destroy_cq() failed ehca_cq=%p " - "cq_num=%x h_ret=%li", my_cq, my_cq->cq_number, h_ret); + "cq_num=%x h_ret=%lli", my_cq, my_cq->cq_number, h_ret); create_cq_exit2: write_lock_irqsave(&ehca_cq_idr_lock, flags); @@ -355,7 +355,7 @@ int ehca_destroy_cq(struct ib_cq *cq) h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0); if (h_ret == H_R_STATE) { /* cq in err: read err data and destroy it forcibly */ - ehca_dbg(device, "ehca_cq=%p cq_num=%x ressource=%lx in err " + ehca_dbg(device, "ehca_cq=%p cq_num=%x resource=%llx in err " "state. Try to delete it forcibly.", my_cq, cq_num, my_cq->ipz_cq_handle.handle); ehca_error_data(shca, my_cq, my_cq->ipz_cq_handle.handle); @@ -365,7 +365,7 @@ int ehca_destroy_cq(struct ib_cq *cq) cq_num); } if (h_ret != H_SUCCESS) { - ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%li " + ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%lli " "ehca_cq=%p cq_num=%x", h_ret, my_cq, cq_num); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c index 4628822..9209c53 100644 --- a/drivers/infiniband/hw/ehca/ehca_hca.c +++ b/drivers/infiniband/hw/ehca/ehca_hca.c @@ -393,7 +393,7 @@ int ehca_modify_port(struct ib_device *ibdev, hret = hipz_h_modify_port(shca->ipz_hca_handle, port, cap, props->init_type, port_modify_mask); if (hret != H_SUCCESS) { - ehca_err(&shca->ib_device, "Modify port failed h_ret=%li", + ehca_err(&shca->ib_device, "Modify port failed h_ret=%lli", hret); ret = -EINVAL; } diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index 3128a50..99bcbd7 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -99,7 +99,7 @@ static void print_error_data(struct ehca_shca *shca, void *data, return; ehca_err(&shca->ib_device, - "QP 0x%x (resource=%lx) has errors.", + "QP 0x%x (resource=%llx) has errors.", qp->ib_qp.qp_num, resource); break; } @@ -108,21 +108,21 @@ static void print_error_data(struct ehca_shca *shca, void *data, struct ehca_cq *cq = (struct ehca_cq *)data; ehca_err(&shca->ib_device, - "CQ 0x%x (resource=%lx) has errors.", + "CQ 0x%x (resource=%llx) has errors.", cq->cq_number, resource); break; } default: ehca_err(&shca->ib_device, - "Unknown error type: %lx on %s.", + "Unknown error type: %llx on %s.", type, shca->ib_device.name); break; } - ehca_err(&shca->ib_device, "Error data is available: %lx.", resource); + ehca_err(&shca->ib_device, "Error data is available: %llx.", resource); ehca_err(&shca->ib_device, "EHCA ----- error data begin " "---------------------------------------------------"); - ehca_dmp(rblock, length, "resource=%lx", resource); + ehca_dmp(rblock, length, "resource=%llx", resource); ehca_err(&shca->ib_device, "EHCA ----- error data end " "----------------------------------------------------"); @@ -152,7 +152,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data, if (ret == H_R_STATE) ehca_err(&shca->ib_device, - "No error data is available: %lx.", resource); + "No error data is available: %llx.", resource); else if (ret == H_SUCCESS) { int length; @@ -164,7 +164,7 @@ int ehca_error_data(struct ehca_shca *shca, void *data, print_error_data(shca, data, rblock, length); } else ehca_err(&shca->ib_device, - "Error data could not be fetched: %lx", resource); + "Error data could not be fetched: %llx", resource); ehca_free_fw_ctrlblock(rblock); @@ -514,7 +514,7 @@ static inline void process_eqe(struct ehca_shca *shca, struct ehca_eqe *eqe) struct ehca_cq *cq; eqe_value = eqe->entry; - ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value); + ehca_dbg(&shca->ib_device, "eqe_value=%llx", eqe_value); if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) { ehca_dbg(&shca->ib_device, "Got completion event"); token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value); @@ -603,7 +603,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq) ret = hipz_h_eoi(eq->ist); if (ret != H_SUCCESS) ehca_err(&shca->ib_device, - "bad return code EOI -rc = %ld\n", ret); + "bad return code EOI -rc = %lld\n", ret); ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt); } if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE)) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c7b8a50..368311c 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -304,7 +304,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca) h_ret = hipz_h_query_hca(shca->ipz_hca_handle, rblock); if (h_ret != H_SUCCESS) { - ehca_gen_err("Cannot query device properties. h_ret=%li", + ehca_gen_err("Cannot query device properties. h_ret=%lli", h_ret); ret = -EPERM; goto sense_attributes1; @@ -391,7 +391,7 @@ static int ehca_sense_attributes(struct ehca_shca *shca) port = (struct hipz_query_port *)rblock; h_ret = hipz_h_query_port(shca->ipz_hca_handle, 1, port); if (h_ret != H_SUCCESS) { - ehca_gen_err("Cannot query port properties. h_ret=%li", + ehca_gen_err("Cannot query port properties. h_ret=%lli", h_ret); ret = -EPERM; goto sense_attributes1; @@ -682,7 +682,7 @@ static ssize_t ehca_show_adapter_handle(struct device *dev, { struct ehca_shca *shca = dev->driver_data; - return sprintf(buf, "%lx\n", shca->ipz_hca_handle.handle); + return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle); } static DEVICE_ATTR(adapter_handle, S_IRUGO, ehca_show_adapter_handle, NULL); diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c index e3ef026..120aedf 100644 --- a/drivers/infiniband/hw/ehca/ehca_mcast.c +++ b/drivers/infiniband/hw/ehca/ehca_mcast.c @@ -88,7 +88,7 @@ int ehca_attach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) if (h_ret != H_SUCCESS) ehca_err(ibqp->device, "ehca_qp=%p qp_num=%x hipz_h_attach_mcqp() failed " - "h_ret=%li", my_qp, ibqp->qp_num, h_ret); + "h_ret=%lli", my_qp, ibqp->qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -125,7 +125,7 @@ int ehca_detach_mcast(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) if (h_ret != H_SUCCESS) ehca_err(ibqp->device, "ehca_qp=%p qp_num=%x hipz_h_detach_mcqp() failed " - "h_ret=%li", my_qp, ibqp->qp_num, h_ret); + "h_ret=%lli", my_qp, ibqp->qp_num, h_ret); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c index f974367..72f83f7 100644 --- a/drivers/infiniband/hw/ehca/ehca_mrmw.c +++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c @@ -204,7 +204,7 @@ struct ib_mr *ehca_reg_phys_mr(struct ib_pd *pd, } if ((size == 0) || (((u64)iova_start + size) < (u64)iova_start)) { - ehca_err(pd->device, "bad input values: size=%lx iova_start=%p", + ehca_err(pd->device, "bad input values: size=%llx iova_start=%p", size, iova_start); ib_mr = ERR_PTR(-EINVAL); goto reg_phys_mr_exit0; @@ -309,8 +309,8 @@ struct ib_mr *ehca_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, } if (length == 0 || virt + length < virt) { - ehca_err(pd->device, "bad input values: length=%lx " - "virt_base=%lx", length, virt); + ehca_err(pd->device, "bad input values: length=%llx " + "virt_base=%llx", length, virt); ib_mr = ERR_PTR(-EINVAL); goto reg_user_mr_exit0; } @@ -373,7 +373,7 @@ reg_user_mr_fallback: &e_mr->ib.ib_mr.rkey); if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) { ehca_warn(pd->device, "failed to register mr " - "with hwpage_size=%lx", hwpage_size); + "with hwpage_size=%llx", hwpage_size); ehca_info(pd->device, "try to register mr with " "kpage_size=%lx", PAGE_SIZE); /* @@ -509,7 +509,7 @@ int ehca_rereg_phys_mr(struct ib_mr *mr, goto rereg_phys_mr_exit1; if ((new_size == 0) || (((u64)iova_start + new_size) < (u64)iova_start)) { - ehca_err(mr->device, "bad input values: new_size=%lx " + ehca_err(mr->device, "bad input values: new_size=%llx " "iova_start=%p", new_size, iova_start); ret = -EINVAL; goto rereg_phys_mr_exit1; @@ -580,8 +580,8 @@ int ehca_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr) h_ret = hipz_h_query_mr(shca->ipz_hca_handle, e_mr, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(mr->device, "hipz_mr_query failed, h_ret=%li mr=%p " - "hca_hndl=%lx mr_hndl=%lx lkey=%x", + ehca_err(mr->device, "hipz_mr_query failed, h_ret=%lli mr=%p " + "hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, mr->lkey); ret = ehca2ib_return_code(h_ret); @@ -630,8 +630,8 @@ int ehca_dereg_mr(struct ib_mr *mr) /* TODO: BUSY: MR still has bound window(s) */ h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { - ehca_err(mr->device, "hipz_free_mr failed, h_ret=%li shca=%p " - "e_mr=%p hca_hndl=%lx mr_hndl=%lx mr->lkey=%x", + ehca_err(mr->device, "hipz_free_mr failed, h_ret=%lli shca=%p " + "e_mr=%p hca_hndl=%llx mr_hndl=%llx mr->lkey=%x", h_ret, shca, e_mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, mr->lkey); ret = ehca2ib_return_code(h_ret); @@ -671,8 +671,8 @@ struct ib_mw *ehca_alloc_mw(struct ib_pd *pd) h_ret = hipz_h_alloc_resource_mw(shca->ipz_hca_handle, e_mw, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%li " - "shca=%p hca_hndl=%lx mw=%p", + ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%lli " + "shca=%p hca_hndl=%llx mw=%p", h_ret, shca, shca->ipz_hca_handle.handle, e_mw); ib_mw = ERR_PTR(ehca2ib_return_code(h_ret)); goto alloc_mw_exit1; @@ -713,8 +713,8 @@ int ehca_dealloc_mw(struct ib_mw *mw) h_ret = hipz_h_free_resource_mw(shca->ipz_hca_handle, e_mw); if (h_ret != H_SUCCESS) { - ehca_err(mw->device, "hipz_free_mw failed, h_ret=%li shca=%p " - "mw=%p rkey=%x hca_hndl=%lx mw_hndl=%lx", + ehca_err(mw->device, "hipz_free_mw failed, h_ret=%lli shca=%p " + "mw=%p rkey=%x hca_hndl=%llx mw_hndl=%llx", h_ret, shca, mw, mw->rkey, shca->ipz_hca_handle.handle, e_mw->ipz_mw_handle.handle); return ehca2ib_return_code(h_ret); @@ -840,7 +840,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr, goto map_phys_fmr_exit0; if (iova % e_fmr->fmr_page_size) { /* only whole-numbered pages */ - ehca_err(fmr->device, "bad iova, iova=%lx fmr_page_size=%x", + ehca_err(fmr->device, "bad iova, iova=%llx fmr_page_size=%x", iova, e_fmr->fmr_page_size); ret = -EINVAL; goto map_phys_fmr_exit0; @@ -878,7 +878,7 @@ int ehca_map_phys_fmr(struct ib_fmr *fmr, map_phys_fmr_exit0: if (ret) ehca_err(fmr->device, "ret=%i fmr=%p page_list=%p list_len=%x " - "iova=%lx", ret, fmr, page_list, list_len, iova); + "iova=%llx", ret, fmr, page_list, list_len, iova); return ret; } /* end ehca_map_phys_fmr() */ @@ -964,8 +964,8 @@ int ehca_dealloc_fmr(struct ib_fmr *fmr) h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr); if (h_ret != H_SUCCESS) { - ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%li e_fmr=%p " - "hca_hndl=%lx fmr_hndl=%lx fmr->lkey=%x", + ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%lli e_fmr=%p " + "hca_hndl=%llx fmr_hndl=%llx fmr->lkey=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, fmr->lkey); ret = ehca2ib_return_code(h_ret); @@ -1007,8 +1007,8 @@ int ehca_reg_mr(struct ehca_shca *shca, (u64)iova_start, size, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%li " - "hca_hndl=%lx", h_ret, shca->ipz_hca_handle.handle); + ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%lli " + "hca_hndl=%llx", h_ret, shca->ipz_hca_handle.handle); ret = ehca2ib_return_code(h_ret); goto ehca_reg_mr_exit0; } @@ -1033,9 +1033,9 @@ int ehca_reg_mr(struct ehca_shca *shca, ehca_reg_mr_exit1: h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "h_ret=%li shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p lkey=%x " - "pginfo=%p num_kpages=%lx num_hwpages=%lx ret=%i", + ehca_err(&shca->ib_device, "h_ret=%lli shca=%p e_mr=%p " + "iova_start=%p size=%llx acl=%x e_pd=%p lkey=%x " + "pginfo=%p num_kpages=%llx num_hwpages=%llx ret=%i", h_ret, shca, e_mr, iova_start, size, acl, e_pd, hipzout.lkey, pginfo, pginfo->num_kpages, pginfo->num_hwpages, ret); @@ -1045,8 +1045,8 @@ ehca_reg_mr_exit1: ehca_reg_mr_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p " - "num_kpages=%lx num_hwpages=%lx", + "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p " + "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; @@ -1116,8 +1116,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca, */ if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "last " - "hipz_reg_rpage_mr failed, h_ret=%li " - "e_mr=%p i=%x hca_hndl=%lx mr_hndl=%lx" + "hipz_reg_rpage_mr failed, h_ret=%lli " + "e_mr=%p i=%x hca_hndl=%llx mr_hndl=%llx" " lkey=%x", h_ret, e_mr, i, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, @@ -1128,8 +1128,8 @@ int ehca_reg_mr_rpages(struct ehca_shca *shca, ret = 0; } else if (h_ret != H_PAGE_REGISTERED) { ehca_err(&shca->ib_device, "hipz_reg_rpage_mr failed, " - "h_ret=%li e_mr=%p i=%x lkey=%x hca_hndl=%lx " - "mr_hndl=%lx", h_ret, e_mr, i, + "h_ret=%lli e_mr=%p i=%x lkey=%x hca_hndl=%llx " + "mr_hndl=%llx", h_ret, e_mr, i, e_mr->ib.ib_mr.lkey, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle); @@ -1145,7 +1145,7 @@ ehca_reg_mr_rpages_exit1: ehca_reg_mr_rpages_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p pginfo=%p " - "num_kpages=%lx num_hwpages=%lx", ret, shca, e_mr, + "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; } /* end ehca_reg_mr_rpages() */ @@ -1184,7 +1184,7 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca, ret = ehca_set_pagebuf(pginfo, pginfo->num_hwpages, kpage); if (ret) { ehca_err(&shca->ib_device, "set pagebuf failed, e_mr=%p " - "pginfo=%p type=%x num_kpages=%lx num_hwpages=%lx " + "pginfo=%p type=%x num_kpages=%llx num_hwpages=%llx " "kpage=%p", e_mr, pginfo, pginfo->type, pginfo->num_kpages, pginfo->num_hwpages, kpage); goto ehca_rereg_mr_rereg1_exit1; @@ -1205,13 +1205,13 @@ inline int ehca_rereg_mr_rereg1(struct ehca_shca *shca, * (MW bound or MR is shared) */ ehca_warn(&shca->ib_device, "hipz_h_reregister_pmr failed " - "(Rereg1), h_ret=%li e_mr=%p", h_ret, e_mr); + "(Rereg1), h_ret=%lli e_mr=%p", h_ret, e_mr); *pginfo = pginfo_save; ret = -EAGAIN; } else if ((u64 *)hipzout.vaddr != iova_start) { ehca_err(&shca->ib_device, "PHYP changed iova_start in " - "rereg_pmr, iova_start=%p iova_start_out=%lx e_mr=%p " - "mr_handle=%lx lkey=%x lkey_out=%x", iova_start, + "rereg_pmr, iova_start=%p iova_start_out=%llx e_mr=%p " + "mr_handle=%llx lkey=%x lkey_out=%x", iova_start, hipzout.vaddr, e_mr, e_mr->ipz_mr_handle.handle, e_mr->ib.ib_mr.lkey, hipzout.lkey); ret = -EFAULT; @@ -1235,7 +1235,7 @@ ehca_rereg_mr_rereg1_exit1: ehca_rereg_mr_rereg1_exit0: if ( ret && (ret != -EAGAIN) ) ehca_err(&shca->ib_device, "ret=%i lkey=%x rkey=%x " - "pginfo=%p num_kpages=%lx num_hwpages=%lx", + "pginfo=%p num_kpages=%llx num_hwpages=%llx", ret, *lkey, *rkey, pginfo, pginfo->num_kpages, pginfo->num_hwpages); return ret; @@ -1263,7 +1263,7 @@ int ehca_rereg_mr(struct ehca_shca *shca, (e_mr->num_hwpages > MAX_RPAGES) || (pginfo->num_hwpages > e_mr->num_hwpages)) { ehca_dbg(&shca->ib_device, "Rereg3 case, " - "pginfo->num_hwpages=%lx e_mr->num_hwpages=%x", + "pginfo->num_hwpages=%llx e_mr->num_hwpages=%x", pginfo->num_hwpages, e_mr->num_hwpages); rereg_1_hcall = 0; rereg_3_hcall = 1; @@ -1295,7 +1295,7 @@ int ehca_rereg_mr(struct ehca_shca *shca, h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_free_mr failed, " - "h_ret=%li e_mr=%p hca_hndl=%lx mr_hndl=%lx " + "h_ret=%lli e_mr=%p hca_hndl=%llx mr_hndl=%llx " "mr->lkey=%x", h_ret, e_mr, shca->ipz_hca_handle.handle, e_mr->ipz_mr_handle.handle, @@ -1328,8 +1328,8 @@ int ehca_rereg_mr(struct ehca_shca *shca, ehca_rereg_mr_exit0: if (ret) ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p " - "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p " - "num_kpages=%lx lkey=%x rkey=%x rereg_1_hcall=%x " + "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p " + "num_kpages=%llx lkey=%x rkey=%x rereg_1_hcall=%x " "rereg_3_hcall=%x", ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo, pginfo->num_kpages, *lkey, *rkey, rereg_1_hcall, rereg_3_hcall); @@ -1371,8 +1371,8 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca, * FMRs are not shared and no MW bound to FMRs */ ehca_err(&shca->ib_device, "hipz_reregister_pmr failed " - "(Rereg1), h_ret=%li e_fmr=%p hca_hndl=%lx " - "mr_hndl=%lx lkey=%x lkey_out=%x", + "(Rereg1), h_ret=%lli e_fmr=%p hca_hndl=%llx " + "mr_hndl=%llx lkey=%x lkey_out=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, e_fmr->ib.ib_fmr.lkey, hipzout.lkey); @@ -1383,7 +1383,7 @@ int ehca_unmap_one_fmr(struct ehca_shca *shca, h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_free_mr failed, " - "h_ret=%li e_fmr=%p hca_hndl=%lx mr_hndl=%lx " + "h_ret=%lli e_fmr=%p hca_hndl=%llx mr_hndl=%llx " "lkey=%x", h_ret, e_fmr, shca->ipz_hca_handle.handle, e_fmr->ipz_mr_handle.handle, @@ -1447,9 +1447,9 @@ int ehca_reg_smr(struct ehca_shca *shca, (u64)iova_start, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li " + ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli " "shca=%p e_origmr=%p e_newmr=%p iova_start=%p acl=%x " - "e_pd=%p hca_hndl=%lx mr_hndl=%lx lkey=%x", + "e_pd=%p hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, shca, e_origmr, e_newmr, iova_start, acl, e_pd, shca->ipz_hca_handle.handle, e_origmr->ipz_mr_handle.handle, @@ -1527,7 +1527,7 @@ int ehca_reg_internal_maxmr( &e_mr->ib.ib_mr.rkey); if (ret) { ehca_err(&shca->ib_device, "reg of internal max MR failed, " - "e_mr=%p iova_start=%p size_maxmr=%lx num_kpages=%x " + "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x " "num_hwpages=%x", e_mr, iova_start, size_maxmr, num_kpages, num_hwpages); goto ehca_reg_internal_maxmr_exit1; @@ -1573,8 +1573,8 @@ int ehca_reg_maxmr(struct ehca_shca *shca, (u64)iova_start, hipz_acl, e_pd->fw_pd, &hipzout); if (h_ret != H_SUCCESS) { - ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li " - "e_origmr=%p hca_hndl=%lx mr_hndl=%lx lkey=%x", + ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli " + "e_origmr=%p hca_hndl=%llx mr_hndl=%llx lkey=%x", h_ret, e_origmr, shca->ipz_hca_handle.handle, e_origmr->ipz_mr_handle.handle, e_origmr->ib.ib_mr.lkey); @@ -1651,28 +1651,28 @@ int ehca_mr_chk_buf_and_calc_size(struct ib_phys_buf *phys_buf_array, /* check first buffer */ if (((u64)iova_start & ~PAGE_MASK) != (pbuf->addr & ~PAGE_MASK)) { ehca_gen_err("iova_start/addr mismatch, iova_start=%p " - "pbuf->addr=%lx pbuf->size=%lx", + "pbuf->addr=%llx pbuf->size=%llx", iova_start, pbuf->addr, pbuf->size); return -EINVAL; } if (((pbuf->addr + pbuf->size) % PAGE_SIZE) && (num_phys_buf > 1)) { - ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%lx " - "pbuf->size=%lx", pbuf->addr, pbuf->size); + ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%llx " + "pbuf->size=%llx", pbuf->addr, pbuf->size); return -EINVAL; } for (i = 0; i < num_phys_buf; i++) { if ((i > 0) && (pbuf->addr % PAGE_SIZE)) { - ehca_gen_err("bad address, i=%x pbuf->addr=%lx " - "pbuf->size=%lx", + ehca_gen_err("bad address, i=%x pbuf->addr=%llx " + "pbuf->size=%llx", i, pbuf->addr, pbuf->size); return -EINVAL; } if (((i > 0) && /* not 1st */ (i < (num_phys_buf - 1)) && /* not last */ (pbuf->size % PAGE_SIZE)) || (pbuf->size == 0)) { - ehca_gen_err("bad size, i=%x pbuf->size=%lx", + ehca_gen_err("bad size, i=%x pbuf->size=%llx", i, pbuf->size); return -EINVAL; } @@ -1705,7 +1705,7 @@ int ehca_fmr_check_page_list(struct ehca_mr *e_fmr, page = page_list; for (i = 0; i < list_len; i++) { if (*page % e_fmr->fmr_page_size) { - ehca_gen_err("bad page, i=%x *page=%lx page=%p fmr=%p " + ehca_gen_err("bad page, i=%x *page=%llx page=%p fmr=%p " "fmr_page_size=%x", i, *page, page, e_fmr, e_fmr->fmr_page_size); return -EINVAL; @@ -1743,9 +1743,9 @@ static int ehca_set_pagebuf_user1(struct ehca_mr_pginfo *pginfo, (pginfo->next_hwpage * pginfo->hwpage_size)); if ( !(*kpage) ) { - ehca_gen_err("pgaddr=%lx " - "chunk->page_list[i]=%lx " - "i=%x next_hwpage=%lx", + ehca_gen_err("pgaddr=%llx " + "chunk->page_list[i]=%llx " + "i=%x next_hwpage=%llx", pgaddr, (u64)sg_dma_address( &chunk->page_list[i]), i, pginfo->next_hwpage); @@ -1795,11 +1795,11 @@ static int ehca_check_kpages_per_ate(struct scatterlist *page_list, for (t = start_idx; t <= end_idx; t++) { u64 pgaddr = page_to_pfn(sg_page(&page_list[t])) << PAGE_SHIFT; if (ehca_debug_level >= 3) - ehca_gen_dbg("chunk_page=%lx value=%016lx", pgaddr, + ehca_gen_dbg("chunk_page=%llx value=%016llx", pgaddr, *(u64 *)abs_to_virt(phys_to_abs(pgaddr))); if (pgaddr - PAGE_SIZE != *prev_pgaddr) { - ehca_gen_err("uncontiguous page found pgaddr=%lx " - "prev_pgaddr=%lx page_list_i=%x", + ehca_gen_err("uncontiguous page found pgaddr=%llx " + "prev_pgaddr=%llx page_list_i=%x", pgaddr, *prev_pgaddr, t); return -EINVAL; } @@ -1833,7 +1833,7 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, << PAGE_SHIFT ); *kpage = phys_to_abs(pgaddr); if ( !(*kpage) ) { - ehca_gen_err("pgaddr=%lx i=%x", + ehca_gen_err("pgaddr=%llx i=%x", pgaddr, i); ret = -EFAULT; return ret; @@ -1846,8 +1846,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, if (pginfo->hwpage_cnt) { ehca_gen_err( "invalid alignment " - "pgaddr=%lx i=%x " - "mr_pgsize=%lx", + "pgaddr=%llx i=%x " + "mr_pgsize=%llx", pgaddr, i, pginfo->hwpage_size); ret = -EFAULT; @@ -1866,8 +1866,8 @@ static int ehca_set_pagebuf_user2(struct ehca_mr_pginfo *pginfo, if (ehca_debug_level >= 3) { u64 val = *(u64 *)abs_to_virt( phys_to_abs(pgaddr)); - ehca_gen_dbg("kpage=%lx chunk_page=%lx " - "value=%016lx", + ehca_gen_dbg("kpage=%llx chunk_page=%llx " + "value=%016llx", *kpage, pgaddr, val); } prev_pgaddr = pgaddr; @@ -1944,9 +1944,9 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo, if ((pginfo->kpage_cnt >= pginfo->num_kpages) || (pginfo->hwpage_cnt >= pginfo->num_hwpages)) { ehca_gen_err("kpage_cnt >= num_kpages, " - "kpage_cnt=%lx num_kpages=%lx " - "hwpage_cnt=%lx " - "num_hwpages=%lx i=%x", + "kpage_cnt=%llx num_kpages=%llx " + "hwpage_cnt=%llx " + "num_hwpages=%llx i=%x", pginfo->kpage_cnt, pginfo->num_kpages, pginfo->hwpage_cnt, @@ -1957,8 +1957,8 @@ static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo, (pbuf->addr & ~(pginfo->hwpage_size - 1)) + (pginfo->next_hwpage * pginfo->hwpage_size)); if ( !(*kpage) && pbuf->addr ) { - ehca_gen_err("pbuf->addr=%lx pbuf->size=%lx " - "next_hwpage=%lx", pbuf->addr, + ehca_gen_err("pbuf->addr=%llx pbuf->size=%llx " + "next_hwpage=%llx", pbuf->addr, pbuf->size, pginfo->next_hwpage); return -EFAULT; } @@ -1996,8 +1996,8 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo, *kpage = phys_to_abs((*fmrlist & ~(pginfo->hwpage_size - 1)) + pginfo->next_hwpage * pginfo->hwpage_size); if ( !(*kpage) ) { - ehca_gen_err("*fmrlist=%lx fmrlist=%p " - "next_listelem=%lx next_hwpage=%lx", + ehca_gen_err("*fmrlist=%llx fmrlist=%p " + "next_listelem=%llx next_hwpage=%llx", *fmrlist, fmrlist, pginfo->u.fmr.next_listelem, pginfo->next_hwpage); @@ -2025,7 +2025,7 @@ static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo, ~(pginfo->hwpage_size - 1)); if (prev + pginfo->u.fmr.fmr_pgsize != p) { ehca_gen_err("uncontiguous fmr pages " - "found prev=%lx p=%lx " + "found prev=%llx p=%llx " "idx=%x", prev, p, i + j); return -EINVAL; } diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index f161cf1..00c1081 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -331,7 +331,7 @@ static inline int init_qp_queue(struct ehca_shca *shca, if (cnt == (nr_q_pages - 1)) { /* last page! */ if (h_ret != expected_hret) { ehca_err(ib_dev, "hipz_qp_register_rpage() " - "h_ret=%li", h_ret); + "h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto init_qp_queue1; } @@ -345,7 +345,7 @@ static inline int init_qp_queue(struct ehca_shca *shca, } else { if (h_ret != H_PAGE_REGISTERED) { ehca_err(ib_dev, "hipz_qp_register_rpage() " - "h_ret=%li", h_ret); + "h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto init_qp_queue1; } @@ -709,7 +709,7 @@ static struct ehca_qp *internal_create_qp( h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms); if (h_ret != H_SUCCESS) { - ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li", + ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli", h_ret); ret = ehca2ib_return_code(h_ret); goto create_qp_exit1; @@ -1010,7 +1010,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not modify SRQ to INIT " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1024,7 +1024,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not enable SRQ " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1038,7 +1038,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { ehca_err(pd->device, "Could not modify SRQ to RTR " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, hret); goto create_srq2; } @@ -1078,7 +1078,7 @@ static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca, &bad_send_wqe_p, NULL, 2); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed" - " ehca_qp=%p qp_num=%x h_ret=%li", + " ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -1134,7 +1134,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) { ehca_gen_err("Invalid offset for calculating left cqes " - "wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v); + "wqe_p=%#llx wqe_v=%p\n", wqe_p, wqe_v); return -EFAULT; } @@ -1168,7 +1168,7 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca) &send_wqe_p, &recv_wqe_p, 4); if (h_ret != H_SUCCESS) { ehca_err(&shca->ib_device, "disable_and_get_wqe() " - "failed ehca_qp=%p qp_num=%x h_ret=%li", + "failed ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp_num, h_ret); return ehca2ib_return_code(h_ret); } @@ -1261,7 +1261,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, mqpcb, my_qp->galpas.kernel); if (h_ret != H_SUCCESS) { ehca_err(ibqp->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, ibqp->qp_num, h_ret); ret = ehca2ib_return_code(h_ret); goto modify_qp_exit1; @@ -1690,7 +1690,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li " + ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num); goto modify_qp_exit2; } @@ -1723,7 +1723,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, ret = ehca2ib_return_code(h_ret); ehca_err(ibqp->device, "ENABLE in context of " "RESET_2_INIT failed! Maybe you didn't get " - "a LID h_ret=%li ehca_qp=%p qp_num=%x", + "a LID h_ret=%lli ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num); goto modify_qp_exit2; } @@ -1909,7 +1909,7 @@ int ehca_query_qp(struct ib_qp *qp, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); ehca_err(qp->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, qp->qp_num, h_ret); goto query_qp_exit1; } @@ -2074,7 +2074,7 @@ int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li " + ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, my_qp->real_qp_num); } @@ -2108,7 +2108,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr) if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); ehca_err(srq->device, "hipz_h_query_qp() failed " - "ehca_qp=%p qp_num=%x h_ret=%li", + "ehca_qp=%p qp_num=%x h_ret=%lli", my_qp, my_qp->real_qp_num, h_ret); goto query_srq_exit1; } @@ -2179,7 +2179,7 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp, h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp); if (h_ret != H_SUCCESS) { - ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li " + ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%lli " "ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num); return ehca2ib_return_code(h_ret); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index c711268..5a3d96f 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -822,7 +822,7 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, offset = qmap->next_wqe_idx * ipz_queue->qe_size; wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset); if (!wqe) { - ehca_err(cq->device, "Invalid wqe offset=%#lx on " + ehca_err(cq->device, "Invalid wqe offset=%#llx on " "qp_num=%#x", offset, my_qp->real_qp_num); return nr; } diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c index 706d97a..44447aa 100644 --- a/drivers/infiniband/hw/ehca/ehca_sqp.c +++ b/drivers/infiniband/hw/ehca/ehca_sqp.c @@ -85,7 +85,7 @@ u64 ehca_define_sqp(struct ehca_shca *shca, if (ret != H_SUCCESS) { ehca_err(&shca->ib_device, - "Can't define AQP1 for port %x. h_ret=%li", + "Can't define AQP1 for port %x. h_ret=%lli", port, ret); return ret; } diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h index 21f7d06..f09914c 100644 --- a/drivers/infiniband/hw/ehca/ehca_tools.h +++ b/drivers/infiniband/hw/ehca/ehca_tools.h @@ -116,7 +116,7 @@ extern int ehca_debug_level; unsigned char *deb = (unsigned char *)(adr); \ for (x = 0; x < l; x += 16) { \ printk(KERN_INFO "EHCA_DMP:%s " format \ - " adr=%p ofs=%04x %016lx %016lx\n", \ + " adr=%p ofs=%04x %016llx %016llx\n", \ __func__, ##args, deb, x, \ *((u64 *)&deb[0]), *((u64 *)&deb[8])); \ deb += 16; \ diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c index e43ed8f..3cb688d 100644 --- a/drivers/infiniband/hw/ehca/ehca_uverbs.c +++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c @@ -114,7 +114,7 @@ static int ehca_mmap_fw(struct vm_area_struct *vma, struct h_galpas *galpas, physical = galpas->user.fw_handle; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical); + ehca_gen_dbg("vsize=%llx physical=%llx", vsize, physical); /* VM_IO | VM_RESERVED are set by remap_pfn_range() */ ret = remap_4k_pfn(vma, vma->vm_start, physical >> EHCA_PAGESHIFT, vma->vm_page_prot); diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 415d3a4..7a13a24 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -249,7 +249,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, *eq_ist = (u32)outs[5]; if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resource - ret=%li ", ret); + ehca_gen_err("Not enough resource - ret=%lli ", ret); return ret; } @@ -287,7 +287,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle, hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -362,7 +362,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle, hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -454,7 +454,7 @@ u64 hipz_h_register_rpage_eq(const struct ipz_adapter_handle adapter_handle, const u64 count) { if (count != 1) { - ehca_gen_err("Ppage counter=%lx", count); + ehca_gen_err("Ppage counter=%llx", count); return H_PARAMETER; } return hipz_h_register_rpage(adapter_handle, @@ -489,7 +489,7 @@ u64 hipz_h_register_rpage_cq(const struct ipz_adapter_handle adapter_handle, const struct h_galpa gal) { if (count != 1) { - ehca_gen_err("Page counter=%lx", count); + ehca_gen_err("Page counter=%llx", count); return H_PARAMETER; } @@ -508,7 +508,7 @@ u64 hipz_h_register_rpage_qp(const struct ipz_adapter_handle adapter_handle, const struct h_galpa galpa) { if (count > 1) { - ehca_gen_err("Page counter=%lx", count); + ehca_gen_err("Page counter=%llx", count); return H_PARAMETER; } @@ -557,7 +557,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Insufficient resources ret=%li", ret); + ehca_gen_err("Insufficient resources ret=%lli", ret); return ret; } @@ -593,7 +593,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, qp->ipz_qp_handle.handle, /* r6 */ 0, 0, 0, 0, 0, 0); if (ret == H_HARDWARE) - ehca_gen_err("HCA not operational. ret=%li", ret); + ehca_gen_err("HCA not operational. ret=%lli", ret); ret = ehca_plpar_hcall_norets(H_FREE_RESOURCE, adapter_handle.handle, /* r4 */ @@ -601,7 +601,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("Resource still in use. ret=%li", ret); + ehca_gen_err("Resource still in use. ret=%lli", ret); return ret; } @@ -636,7 +636,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle, *bma_qp_nr = (u32)outs[1]; if (ret == H_ALIAS_EXIST) - ehca_gen_err("AQP1 already exists. ret=%li", ret); + ehca_gen_err("AQP1 already exists. ret=%lli", ret); return ret; } @@ -658,7 +658,7 @@ u64 hipz_h_attach_mcqp(const struct ipz_adapter_handle adapter_handle, 0, 0); if (ret == H_NOT_ENOUGH_RESOURCES) - ehca_gen_err("Not enough resources. ret=%li", ret); + ehca_gen_err("Not enough resources. ret=%lli", ret); return ret; } @@ -697,7 +697,7 @@ u64 hipz_h_destroy_cq(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("H_FREE_RESOURCE failed ret=%li ", ret); + ehca_gen_err("H_FREE_RESOURCE failed ret=%lli ", ret); return ret; } @@ -719,7 +719,7 @@ u64 hipz_h_destroy_eq(const struct ipz_adapter_handle adapter_handle, 0, 0, 0, 0, 0); if (ret == H_RESOURCE) - ehca_gen_err("Resource in use. ret=%li ", ret); + ehca_gen_err("Resource in use. ret=%lli ", ret); return ret; } @@ -774,9 +774,9 @@ u64 hipz_h_register_rpage_mr(const struct ipz_adapter_handle adapter_handle, if ((count > 1) && (logical_address_of_page & (EHCA_PAGESIZE-1))) { ehca_gen_err("logical_address_of_page not on a 4k boundary " - "adapter_handle=%lx mr=%p mr_handle=%lx " + "adapter_handle=%llx mr=%p mr_handle=%llx " "pagesize=%x queue_type=%x " - "logical_address_of_page=%lx count=%lx", + "logical_address_of_page=%llx count=%llx", adapter_handle.handle, mr, mr->ipz_mr_handle.handle, pagesize, queue_type, logical_address_of_page, count); -- cgit v0.10.2 From ee96aae57381e77311538f4a1dd4326f6ae079d1 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 16 Jan 2009 14:55:40 -0800 Subject: IB/ehca: Use consistent types for ehca_plpar_hcall9() ehca_plpar_hcall9() takes an unsigned long array, so make all callers pass that in. This fixes warnings introduced by commit fe333321 ("powerpc: Change u64/s64 to a long long integer type"), which changed u64 from unsigned long to unsigned long long. Signed-off-by: Stephen Rothwell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 7a13a24..d0ab0c0 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -226,7 +226,7 @@ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, u32 *eq_ist) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; u64 allocate_controls; /* resource type */ @@ -270,7 +270,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle, struct ehca_alloc_cq_parms *param) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -297,7 +297,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle, { u64 ret; u64 allocate_controls, max_r10_reg, r11, r12; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; allocate_controls = EHCA_BMASK_SET(H_ALL_RES_QP_ENHANCED_OPS, parms->ext_type) @@ -525,7 +525,7 @@ u64 hipz_h_disable_and_get_wqe(const struct ipz_adapter_handle adapter_handle, int dis_and_get_function_code) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_DISABLE_AND_GETC, outs, adapter_handle.handle, /* r4 */ @@ -548,7 +548,7 @@ u64 hipz_h_modify_qp(const struct ipz_adapter_handle adapter_handle, struct h_galpa gal) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_MODIFY_QP, outs, adapter_handle.handle, /* r4 */ qp_handle.handle, /* r5 */ @@ -579,7 +579,7 @@ u64 hipz_h_destroy_qp(const struct ipz_adapter_handle adapter_handle, struct ehca_qp *qp) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = hcp_galpas_dtor(&qp->galpas); if (ret) { @@ -625,7 +625,7 @@ u64 hipz_h_define_aqp1(const struct ipz_adapter_handle adapter_handle, u32 * bma_qp_nr) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_DEFINE_AQP1, outs, adapter_handle.handle, /* r4 */ @@ -733,7 +733,7 @@ u64 hipz_h_alloc_resource_mr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -794,7 +794,7 @@ u64 hipz_h_query_mr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_QUERY_MR, outs, adapter_handle.handle, /* r4 */ @@ -828,7 +828,7 @@ u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_REREGISTER_PMR, outs, adapter_handle.handle, /* r4 */ @@ -855,7 +855,7 @@ u64 hipz_h_register_smr(const struct ipz_adapter_handle adapter_handle, struct ehca_mr_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_REGISTER_SMR, outs, adapter_handle.handle, /* r4 */ @@ -877,7 +877,7 @@ u64 hipz_h_alloc_resource_mw(const struct ipz_adapter_handle adapter_handle, struct ehca_mw_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs, adapter_handle.handle, /* r4 */ @@ -895,7 +895,7 @@ u64 hipz_h_query_mw(const struct ipz_adapter_handle adapter_handle, struct ehca_mw_hipzout_parms *outparms) { u64 ret; - u64 outs[PLPAR_HCALL9_BUFSIZE]; + unsigned long outs[PLPAR_HCALL9_BUFSIZE]; ret = ehca_plpar_hcall9(H_QUERY_MW, outs, adapter_handle.handle, /* r4 */ -- cgit v0.10.2 From 091d71e023557136e96f0e54f301497a3fc95dc3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 17 Jan 2009 00:10:45 +0100 Subject: PM: Fix compilation warning in kernel/power/main.c Reorder the code in kernel/power/main.c to fix compilation warning triggered by unsetting CONFIG_SUSPEND. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown diff --git a/kernel/power/main.c b/kernel/power/main.c index 2399888..b4d2190 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -57,16 +57,6 @@ int pm_notifier_call_chain(unsigned long val) #ifdef CONFIG_PM_DEBUG int pm_test_level = TEST_NONE; -static int suspend_test(int level) -{ - if (pm_test_level == level) { - printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n"); - mdelay(5000); - return 1; - } - return 0; -} - static const char * const pm_tests[__TEST_AFTER_LAST] = { [TEST_NONE] = "none", [TEST_CORE] = "core", @@ -125,14 +115,24 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr, } power_attr(pm_test); -#else /* !CONFIG_PM_DEBUG */ -static inline int suspend_test(int level) { return 0; } -#endif /* !CONFIG_PM_DEBUG */ +#endif /* CONFIG_PM_DEBUG */ #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_SUSPEND +static int suspend_test(int level) +{ +#ifdef CONFIG_PM_DEBUG + if (pm_test_level == level) { + printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n"); + mdelay(5000); + return 1; + } +#endif /* !CONFIG_PM_DEBUG */ + return 0; +} + #ifdef CONFIG_PM_TEST_SUSPEND /* -- cgit v0.10.2 From 5d8b532af9e52ea89208f5ef31889f646e67ba28 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 16 Jan 2009 23:09:14 +0100 Subject: ACPI suspend: Fix compilation warnings in drivers/acpi/sleep.c Fix two compilation warnings in drivers/acpi/sleep.c, one triggered by unsetting CONFIG_SUSPEND and the other triggered by unsetting CONFIG_HIBERNATION, by moving some code under the appropriate #ifdefs . Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 707c1f6..a60c1f3 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -156,11 +156,11 @@ static int __init acpi_sleep_setup(char *str) #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature(); + if (strncmp(str, "s4_nonvs", 8) == 0) + acpi_s4_no_nvs(); #endif if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); - if (strncmp(str, "s4_nonvs", 8) == 0) - acpi_s4_no_nvs(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 7e3c609..af85f5b 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -90,31 +90,6 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -193,6 +168,18 @@ static void acpi_pm_end(void) #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -396,6 +383,20 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. However, it is not certain + * if this mechanism is going to work on all machines, so we allow the user to + * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line + * option. + */ +static bool s4_no_nvs; + +void __init acpi_s4_no_nvs(void) +{ + s4_no_nvs = true; +} + static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; -- cgit v0.10.2 From 5dbdf7354821e00e4419ac3520d05d126857d56e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 12 Jan 2009 23:25:05 +0100 Subject: move wm8400-regulator's probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to wm8400_regulator_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 48b372e..56e23d4 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -289,7 +289,7 @@ static struct regulator_desc regulators[] = { }, }; -static int __init wm8400_regulator_probe(struct platform_device *pdev) +static int __devinit wm8400_regulator_probe(struct platform_device *pdev) { struct regulator_dev *rdev; -- cgit v0.10.2 From fdb6a8f4db813b4e50f4e975efe6be12ba5bf460 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Sat, 17 Jan 2009 17:13:27 +0100 Subject: oprofile: fix uninitialized use of struct op_entry Impact: fix crash In case of losing samples struct op_entry could have been used uninitialized causing e.g. a wrong preemption count or NULL pointer access. This patch fixes this. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index 2e03b6d..e76d715 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -393,16 +393,21 @@ oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs, return; fail: + entry->event = NULL; cpu_buf->sample_lost_overflow++; } int oprofile_add_data(struct op_entry *entry, unsigned long val) { + if (!entry->event) + return 0; return op_cpu_buffer_add_data(entry, val); } int oprofile_write_commit(struct op_entry *entry) { + if (!entry->event) + return -EINVAL; return op_cpu_buffer_write_commit(entry); } diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h index 63f81c4..272995d 100644 --- a/drivers/oprofile/cpu_buffer.h +++ b/drivers/oprofile/cpu_buffer.h @@ -66,6 +66,13 @@ static inline void op_cpu_buffer_reset(int cpu) cpu_buf->last_task = NULL; } +/* + * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be + * called only if op_cpu_buffer_write_reserve() did not return NULL or + * entry->event != NULL, otherwise entry->size or entry->event will be + * used uninitialized. + */ + struct op_sample *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size); int op_cpu_buffer_write_commit(struct op_entry *entry); -- cgit v0.10.2 From 0d54ee1c7850a954026deec4cd4885f331da35cc Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sat, 17 Jan 2009 17:45:45 +0100 Subject: security: introduce missing kfree Plug this leak. Acked-by: David Howells Cc: James Morris Cc: Signed-off-by: Vegard Nossum Signed-off-by: Linus Torvalds diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index e9335e1..b1ec3b4 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -270,6 +270,7 @@ long keyctl_join_session_keyring(const char __user *_name) /* join the session */ ret = join_session_keyring(name); + kfree(name); error: return ret; -- cgit v0.10.2 From 81156928f8fe31621e467490b9d441c0285998c3 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sat, 17 Jan 2009 13:33:03 -0500 Subject: dell_rbu: use scnprintf() instead of less secure sprintf() Reading 0 bytes from /sys/devices/platform/dell_rbu/image_type or /sys/devices/platform/dell_rbu/packet_size by an ordinary user causes an oops. Signed-off-by: Pavel Roskin Signed-off-by: Linus Torvalds diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c index 13946eb..b4704e1 100644 --- a/drivers/firmware/dell_rbu.c +++ b/drivers/firmware/dell_rbu.c @@ -576,7 +576,7 @@ static ssize_t read_rbu_image_type(struct kobject *kobj, { int size = 0; if (!pos) - size = sprintf(buffer, "%s\n", image_type); + size = scnprintf(buffer, count, "%s\n", image_type); return size; } @@ -648,7 +648,7 @@ static ssize_t read_rbu_packet_size(struct kobject *kobj, int size = 0; if (!pos) { spin_lock(&rbu_data.lock); - size = sprintf(buffer, "%lu\n", rbu_data.packetsize); + size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize); spin_unlock(&rbu_data.lock); } return size; -- cgit v0.10.2 From 4312495f7db63d27ef52ec83dab55f14a8c43827 Mon Sep 17 00:00:00 2001 From: Tero Roponen Date: Sat, 17 Jan 2009 13:06:02 +0200 Subject: ACPI: Fix crash on ASUS laptops This patch fixes the crash I experienced in 2.6.29-rc2. Tested on ASUS M50vm. Signed-off-by: Tero Roponen Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a2b82c9..5c2f5d3 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -982,7 +982,7 @@ int __init acpi_ec_ecdt_probe(void) saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); if (!saved_ec) return -ENOMEM; - memcpy(&saved_ec, boot_ec, sizeof(saved_ec)); + memcpy(saved_ec, boot_ec, sizeof(*saved_ec)); /* fall through */ } /* This workaround is needed only on some broken machines, -- cgit v0.10.2 From 2b190e76def5233c542f6025b4a133b1d4bd1a37 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 17 Jan 2009 15:51:27 +0100 Subject: panasonic-laptop: fix X[ ARRAY_SIZE(X) ] Ensure pcc->keymap[ ARRAY_SIZE(pcc->keymap) ] does not occur. Signed-off-by: Roel Kluin Signed-off-by: Len Brown diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index f30db36..c47a44d 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -507,7 +507,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc) hkey_num = result & 0xf; - if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) { + if (hkey_num < 0 || hkey_num >= ARRAY_SIZE(pcc->keymap)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "hotkey number out of range: %d\n", hkey_num)); -- cgit v0.10.2 From c275ce44929402664902cbb09d4f054b315623d7 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Jan 2009 23:10:35 -0800 Subject: sparc64: fix readout of cpu/fpu type Meelis reported that on his box /proc/cpuinfo started to reported "Unknow CPU" and the same did the boot messages. It was a stupid bug I introduced when merging cpu.c for 32 and 64 bit. The code did an array reference where it had to search for the right index. Reported-by: Meelis Roos Tested-by: Meelis Roos Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index f0b8255..32d32b4 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -239,14 +239,26 @@ unsigned int fsr_storage; static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) { + const struct manufacturer_info *manuf; + int i; + sparc_cpu_type = NULL; sparc_fpu_type = NULL; - if (psr_impl < ARRAY_SIZE(manufacturer_info)) + manuf = NULL; + + for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++) + { + if (psr_impl == manufacturer_info[i].psr_impl) { + manuf = &manufacturer_info[i]; + break; + } + } + if (manuf != NULL) { const struct cpu_info *cpu; const struct fpu_info *fpu; - cpu = &manufacturer_info[psr_impl].cpu_info[0]; + cpu = &manuf->cpu_info[0]; while (cpu->psr_vers != -1) { if (cpu->psr_vers == psr_vers) { @@ -256,7 +268,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) } cpu++; } - fpu = &manufacturer_info[psr_impl].fpu_info[0]; + fpu = &manuf->fpu_info[0]; while (fpu->fp_vers != -1) { if (fpu->fp_vers == fpu_vers) { -- cgit v0.10.2 From 62dfcd336c79c49f9aeb0acc99cf9a1832102dd5 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 17 Jan 2009 23:12:27 -0800 Subject: sparc64: fix modpost failure Previously PeeCeeI.o was a library but it was always pulled in due to insw and friends being exported (at least for a modular kernel). But this resulted in modpost failures if there where no in-kernel users because then insw & friends were not linked in. Fix this by including PeeCeeI.o in the kernel unconditionally. The only drawback for this solution is that a nonmodular kernel will always include insw & friends no matter if they are in use or not. Reported-by: Meelis Roos Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 273fc85..e75faf0 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -18,7 +18,7 @@ lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o lib-y += rwsem_$(BITS).o lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o -lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o +lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o lib-$(CONFIG_SPARC64) += VISsave.o lib-$(CONFIG_SPARC64) += bitops.o @@ -43,3 +43,4 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o obj-y += iomap.o obj-$(CONFIG_SPARC32) += atomic32.o obj-y += ksyms.o +obj-$(CONFIG_SPARC64) += PeeCeeI.o -- cgit v0.10.2 From 989738c4f82126207b9e04c9395b78e544f3d33c Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Sat, 17 Jan 2009 18:47:27 -0500 Subject: ALSA: hda: fix invalid power mapping masks Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs. They were shifted right one too many bits. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index faef1ca..a4d4afe 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -334,7 +334,7 @@ static hda_nid_t stac92hd83xxx_slave_dig_outs[2] = { }; static unsigned int stac92hd83xxx_pwr_mapping[4] = { - 0x03, 0x0c, 0x10, 0x40, + 0x03, 0x0c, 0x20, 0x80, }; static hda_nid_t stac92hd83xxx_amp_nids[1] = { -- cgit v0.10.2 From cd9f8e64c232eeb1247950007ee95de00b89ba7a Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Sun, 18 Jan 2009 10:40:24 +0100 Subject: sound: Remove removed OSS kernel parameters from doc Remove removed OSS kernel parameters from kernel-parameters.txt Remove the kernel parameters from the OSS drivers of the chips es1371 (removed 10-2007/2.6.24) and cs4232 (removed 02-2008/2.6.25) from the kernel parameters documentation. Signed-off-by: Henrik Kretzschmar Signed-off-by: Takashi Iwai diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8511d35..d8362cf 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -577,9 +577,6 @@ and is between 256 and 4096 characters. It is defined in the file a memory unit (amount[KMG]). See also Documentation/kdump/kdump.txt for a example. - cs4232= [HW,OSS] - Format: ,,,,, - cs89x0_dma= [HW,NET] Format: @@ -732,10 +729,6 @@ and is between 256 and 4096 characters. It is defined in the file Default value is 0. Value can be changed at runtime via /selinux/enforce. - es1371= [HW,OSS] - Format: ,[,[]] - See also header of sound/oss/es1371.c. - ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. -- cgit v0.10.2 From 141e6ebd1b1759bd5cebf092b7216b6f1c7b4c4f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:44:11 +0100 Subject: UBI: add ioctl for map operation This patch adds ioctl for the LEB map operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31e..055e3f5 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -518,6 +518,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 2dc2eb2..7585740 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -133,6 +133,9 @@ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) /* An atomic eraseblock change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) +/* Map an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) + /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 @@ -319,4 +322,16 @@ struct ubi_leb_change_req { int8_t padding[7]; } __attribute__ ((packed)); +/** + * struct ubi_map_req - a data structure used in map eraseblock requests. + * @lnum: logical eraseblock number to unmap + * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * @padding: reserved for future, not used, has to be zeroed + */ +struct ubi_map_req { + int32_t lnum; + int8_t dtype; + int8_t padding[3]; +} __attribute__ ((packed)); + #endif /* __UBI_USER_H__ */ -- cgit v0.10.2 From c3da23be1673be4e738aea235604b4e6cb259655 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:46:19 +0100 Subject: UBI: add ioctl for unmap operation This patch adds ioctl for the LEB unmap operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 055e3f5..fd7e0f9 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -532,13 +532,26 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_map(desc, req.lnum, req.dtype); break; } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } #endif default: err = -ENOTTY; break; } - return err; } diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 7585740..ee2ea2e 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -135,7 +135,8 @@ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) /* Map an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) - +/* Unmap an eraseblock, used for debugging, disabled by default */ +#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v0.10.2 From a27ce8f55dd5fddf0b8ea179cce8f399c13dc94f Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 5 Jan 2009 14:48:59 +0100 Subject: UBI: add ioctl for is_mapped operation This patch adds ioctl to check if an LEB is mapped or not (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: Corentin Chary Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index fd7e0f9..9ddbade 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -546,6 +546,20 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_leb_unmap(desc, lnum); break; } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } #endif default: diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index ee2ea2e..5828d78 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -137,6 +137,8 @@ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) /* Unmap an eraseblock, used for debugging, disabled by default */ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) +/* Check if an eraseblock is mapped, used for debugging, disabled by default */ +#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 -- cgit v0.10.2 From f7fc6f3f33703e3365c0ef9d4bf322b88cc9dae7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 7 Jan 2009 16:10:58 +0200 Subject: UBI: improve ioctl commentaries Signed-off-by: Artem Bityutskiy diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index 5828d78..82113e1 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -40,37 +40,37 @@ * UBI volume creation * ~~~~~~~~~~~~~~~~~~~ * - * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character + * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character * device. A &struct ubi_mkvol_req object has to be properly filled and a - * pointer to it has to be passed to the IOCTL. + * pointer to it has to be passed to the ioctl. * * UBI volume deletion * ~~~~~~~~~~~~~~~~~~~ * - * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character + * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character * device should be used. A pointer to the 32-bit volume ID hast to be passed - * to the IOCTL. + * to the ioctl. * * UBI volume re-size * ~~~~~~~~~~~~~~~~~~ * - * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character + * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character * device should be used. A &struct ubi_rsvol_req object has to be properly - * filled and a pointer to it has to be passed to the IOCTL. + * filled and a pointer to it has to be passed to the ioctl. * * UBI volumes re-name * ~~~~~~~~~~~~~~~~~~~ * * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command * of the UBI character device should be used. A &struct ubi_rnvol_req object - * has to be properly filled and a pointer to it has to be passed to the IOCTL. + * has to be properly filled and a pointer to it has to be passed to the ioctl. * * UBI volume update * ~~~~~~~~~~~~~~~~~ * - * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the + * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the * corresponding UBI volume character device. A pointer to a 64-bit update - * size should be passed to the IOCTL. After this, UBI expects user to write + * size should be passed to the ioctl. After this, UBI expects user to write * this number of bytes to the volume character device. The update is finished * when the claimed number of bytes is passed. So, the volume update sequence * is something like: @@ -80,14 +80,50 @@ * write(fd, buf, image_size); * close(fd); * - * Atomic eraseblock change + * Logical eraseblock erase * ~~~~~~~~~~~~~~~~~~~~~~~~ * - * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL - * command of the corresponding UBI volume character device. A pointer to - * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is - * expected to write the requested amount of bytes. This is similar to the - * "volume update" IOCTL. + * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the + * corresponding UBI volume character device should be used. This command + * unmaps the requested logical eraseblock, makes sure the corresponding + * physical eraseblock is successfully erased, and returns. + * + * Atomic logical eraseblock change + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH + * ioctl command of the corresponding UBI volume character device. A pointer to + * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the + * user is expected to write the requested amount of bytes (similarly to what + * should be done in case of the "volume update" ioctl). + * + * Logical eraseblock map + * ~~~~~~~~~~~~~~~~~~~~~ + * + * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP + * ioctl command should be used. A pointer to a &struct ubi_map_req object is + * expected to be passed. The ioctl maps the requested logical eraseblock to + * a physical eraseblock and returns. Only non-mapped logical eraseblocks can + * be mapped. If the logical eraseblock specified in the request is already + * mapped to a physical eraseblock, the ioctl fails and returns error. + * + * Logical eraseblock unmap + * ~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP + * ioctl command should be used. The ioctl unmaps the logical eraseblocks, + * schedules corresponding physical eraseblock for erasure, and returns. Unlike + * the "LEB erase" command, it does not wait for the physical eraseblock being + * erased. Note, the side effect of this is that if an unclean reboot happens + * after the unmap ioctl returns, you may find the LEB mapped again to the same + * physical eraseblock after the UBI is run again. + * + * Check if logical eraseblock is mapped + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To check if a logical eraseblock is mapped to a physical eraseblock, the + * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is + * not mapped, and %1 if it is mapped. */ /* @@ -101,7 +137,7 @@ /* Maximum volume name length */ #define UBI_MAX_VOLUME_NAME 127 -/* IOCTL commands of UBI character devices */ +/* ioctl commands of UBI character devices */ #define UBI_IOC_MAGIC 'o' @@ -114,7 +150,7 @@ /* Re-name volumes */ #define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req) -/* IOCTL commands of the UBI control character device */ +/* ioctl commands of the UBI control character device */ #define UBI_CTRL_IOC_MAGIC 'o' @@ -123,21 +159,21 @@ /* Detach an MTD device */ #define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t) -/* IOCTL commands of UBI volume character devices */ +/* ioctl commands of UBI volume character devices */ #define UBI_VOL_IOC_MAGIC 'O' /* Start UBI volume update */ #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t) -/* An eraseblock erasure command, used for debugging, disabled by default */ +/* LEB erasure command, used for debugging, disabled by default */ #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t) -/* An atomic eraseblock change command */ +/* Atomic LEB change command */ #define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t) -/* Map an eraseblock, used for debugging, disabled by default */ +/* Map LEB command */ #define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req) -/* Unmap an eraseblock, used for debugging, disabled by default */ +/* Unmap LEB command */ #define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, int32_t) -/* Check if an eraseblock is mapped, used for debugging, disabled by default */ +/* Check if LEB is mapped command */ #define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, int32_t) /* Maximum MTD device name length supported by UBI */ @@ -311,8 +347,8 @@ struct ubi_rnvol_req { } __attribute__ ((packed)); /** - * struct ubi_leb_change_req - a data structure used in atomic logical - * eraseblock change requests. + * struct ubi_leb_change_req - a data structure used in atomic LEB change + * requests. * @lnum: logical eraseblock number to change * @bytes: how many bytes will be written to the logical eraseblock * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) @@ -326,7 +362,7 @@ struct ubi_leb_change_req { } __attribute__ ((packed)); /** - * struct ubi_map_req - a data structure used in map eraseblock requests. + * struct ubi_map_req - a data structure used in map LEB requests. * @lnum: logical eraseblock number to unmap * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) * @padding: reserved for future, not used, has to be zeroed -- cgit v0.10.2 From 573135b5dbc02be12940558db23158cc9ee89c66 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:02:08 +0200 Subject: UBI: remove unnecessry header inclusion Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 9ddbade..98cf7a4 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include "ubi.h" -- cgit v0.10.2 From ade44ce07c9316351ae321051221c9bad3af3a44 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:03:22 +0200 Subject: UBI: allow all ioctls Some ioctl's in UBI are enabled only when debugging is switched on. There is not particular reason for this, just noone needed them. However, some people need the now for their user-space development. Thus, allow these ioctl's even if UBI debugging is disabled. Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf7a4..c183be9 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -486,7 +486,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -559,7 +558,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_is_mapped(desc, lnum); break; } -#endif default: err = -ENOTTY; -- cgit v0.10.2 From 4d187a88d3ee3be6a1a0b6859eb00f70e1601b5e Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 11 Jan 2009 23:55:39 +0100 Subject: UBI: constify file operations Signed-off-by: Jan Engelhardt Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index c183be9..d99935c 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -1025,20 +1025,20 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, } /* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { +const struct file_operations ubi_ctrl_cdev_operations = { .ioctl = ctrl_cdev_ioctl, .owner = THIS_MODULE, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { +const struct file_operations ubi_cdev_operations = { .owner = THIS_MODULE, .ioctl = ubi_cdev_ioctl, .llseek = no_llseek, }; /* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { +const struct file_operations ubi_vol_cdev_operations = { .owner = THIS_MODULE, .open = vol_cdev_open, .release = vol_cdev_release, diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec48..381f0e1 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -449,9 +449,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; -- cgit v0.10.2 From dedb0d48a9d4d57086526b94a4b64da789a646e4 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 9 Jan 2009 21:02:37 +0200 Subject: UBIFS: do not commit twice VFS calls '->sync_fs()' twice - first time with @wait = 0, second time with @wait = 1. As a result, we may commit and synchronize write-buffers twice. Avoid doing this by returning immediatelly if @wait = 0. Signed-off-by: Artem Bityutskiy diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 89556ee..a7fc97f 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -432,18 +432,19 @@ static int ubifs_sync_fs(struct super_block *sb, int wait) int i, err; struct ubifs_info *c = sb->s_fs_info; struct writeback_control wbc = { - .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE, + .sync_mode = WB_SYNC_ALL, .range_start = 0, .range_end = LLONG_MAX, .nr_to_write = LONG_MAX, }; /* - * Note by akpm about WB_SYNC_NONE used above: zero @wait is just an - * advisory thing to help the file system shove lots of data into the - * queues. If some gets missed then it'll be picked up on the second + * Zero @wait is just an advisory thing to help the file system shove + * lots of data into the queues, and there will be the second * '->sync_fs()' call, with non-zero @wait. */ + if (!wait) + return 0; if (sb->s_flags & MS_RDONLY) return 0; -- cgit v0.10.2 From e8b815663b1bfd9c255af5176604ec0eafdf6ed7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 15 Jan 2009 17:43:23 +0200 Subject: UBIFS: constify operations Mark super, file, and inode operation structcutes with 'const'. Signed-off-by: Artem Bityutskiy diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index f448ab1..d29b771 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -1199,7 +1199,7 @@ int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry, return 0; } -struct inode_operations ubifs_dir_inode_operations = { +const struct inode_operations ubifs_dir_inode_operations = { .lookup = ubifs_lookup, .create = ubifs_create, .link = ubifs_link, @@ -1219,7 +1219,7 @@ struct inode_operations ubifs_dir_inode_operations = { #endif }; -struct file_operations ubifs_dir_operations = { +const struct file_operations ubifs_dir_operations = { .llseek = ubifs_dir_llseek, .release = ubifs_dir_release, .read = generic_read_dir, diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index bf37374..17443d9 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -1541,7 +1541,7 @@ static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma) return 0; } -struct address_space_operations ubifs_file_address_operations = { +const struct address_space_operations ubifs_file_address_operations = { .readpage = ubifs_readpage, .writepage = ubifs_writepage, .write_begin = ubifs_write_begin, @@ -1551,7 +1551,7 @@ struct address_space_operations ubifs_file_address_operations = { .releasepage = ubifs_releasepage, }; -struct inode_operations ubifs_file_inode_operations = { +const struct inode_operations ubifs_file_inode_operations = { .setattr = ubifs_setattr, .getattr = ubifs_getattr, #ifdef CONFIG_UBIFS_FS_XATTR @@ -1562,14 +1562,14 @@ struct inode_operations ubifs_file_inode_operations = { #endif }; -struct inode_operations ubifs_symlink_inode_operations = { +const struct inode_operations ubifs_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = ubifs_follow_link, .setattr = ubifs_setattr, .getattr = ubifs_getattr, }; -struct file_operations ubifs_file_operations = { +const struct file_operations ubifs_file_operations = { .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index a7fc97f..53811e5 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1778,7 +1778,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) return 0; } -struct super_operations ubifs_super_operations = { +const struct super_operations ubifs_super_operations = { .alloc_inode = ubifs_alloc_inode, .destroy_inode = ubifs_destroy_inode, .put_super = ubifs_put_super, diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index fc2a4cc..0881897 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1405,13 +1405,13 @@ extern struct list_head ubifs_infos; extern spinlock_t ubifs_infos_lock; extern atomic_long_t ubifs_clean_zn_cnt; extern struct kmem_cache *ubifs_inode_slab; -extern struct super_operations ubifs_super_operations; -extern struct address_space_operations ubifs_file_address_operations; -extern struct file_operations ubifs_file_operations; -extern struct inode_operations ubifs_file_inode_operations; -extern struct file_operations ubifs_dir_operations; -extern struct inode_operations ubifs_dir_inode_operations; -extern struct inode_operations ubifs_symlink_inode_operations; +extern const struct super_operations ubifs_super_operations; +extern const struct address_space_operations ubifs_file_address_operations; +extern const struct file_operations ubifs_file_operations; +extern const struct inode_operations ubifs_file_inode_operations; +extern const struct file_operations ubifs_dir_operations; +extern const struct inode_operations ubifs_dir_inode_operations; +extern const struct inode_operations ubifs_symlink_inode_operations; extern struct backing_dev_info ubifs_backing_dev_info; extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; -- cgit v0.10.2 From f429b2ea8eadb5a576542a70f7fd6f5c2a7455e1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 18:06:55 +0200 Subject: UBI: add ioctl compatibility UBI ioctl's do not work when running 64-bit kernel and 32-bit user-land. Fix this by adding the compat_ioctl method. Also, UBI serializes all ioctls, so more than one ioctl at a time is not a problem. Amd UBI does not seem to depend on anything else, so use unlocked_ioctl instead of ioctl (no BKL needed). Reported-by: Geert Uytterhoeven Signed-off-by: Artem Bityutskiy Reviewed-by: Arnd Bergmann diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index d99935c..0a2d835 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include "ubi.h" @@ -401,8 +402,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -800,8 +801,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -811,7 +812,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -947,8 +948,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -1024,26 +1025,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -const struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ const struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -const struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; -- cgit v0.10.2 From 3013ee31b6c5fd9a49a81816d6c13e1cdb7a1288 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 16 Jan 2009 19:08:43 +0200 Subject: UBI: use nicer 64-bit math Get rid of 'do_div()' and use more user-friendly primitives from 'linux/math64.h'. Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 0a2d835..f9631eb 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -41,8 +41,8 @@ #include #include #include +#include #include -#include #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -279,7 +275,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -882,7 +874,6 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -902,9 +893,8 @@ static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e..49cd55a 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include +#include #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202..c3d653b 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc1..6b4d1ae 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d73..df54835 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include -#include +#include #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; -- cgit v0.10.2 From b786c6a98ef6fa81114ba7b9fbfc0d67060775e3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 17 Jan 2009 12:04:36 +0100 Subject: relay: fix lock imbalance in relay_late_setup_files One fail path in relay_late_setup_files() omits mutex_unlock(&relay_channels_mutex); Add it. Signed-off-by: Jiri Slaby Signed-off-by: Ingo Molnar diff --git a/kernel/relay.c b/kernel/relay.c index 09ac200..9d79b78 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -663,8 +663,10 @@ int relay_late_setup_files(struct rchan *chan, mutex_lock(&relay_channels_mutex); /* Is chan already set up? */ - if (unlikely(chan->has_base_filename)) + if (unlikely(chan->has_base_filename)) { + mutex_unlock(&relay_channels_mutex); return -EEXIST; + } chan->has_base_filename = 1; chan->parent = parent; curr_cpu = get_cpu(); -- cgit v0.10.2 From 64dec40ddee9d36d7b83f8a0513fdeaffe260a0e Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 16 Jan 2009 13:23:35 -0500 Subject: x86: define ARCH_WANT_FRAME_POINTERS Commit da4276b8299a6544dc41ac2485d3ffca5811b3fb changed a dependency for FRAME_POINTER from X86 to ARCH_WANT_FRAME_POINTERS, but didn't actually define it. This patch adds the definition for ARCH_WANT_FRAME_POINTERS. Without it, FRAME_POINTER can't be enabled on x86. Signed-off-by: Jeff Mahoney Signed-off-by: Ingo Molnar diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c9ae60..d30561d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -570,6 +570,15 @@ config DEBUG_NOTIFIERS This is a relatively cheap check but if you care about maximum performance, say N. +# +# Select this config option from the architecture Kconfig, if it +# it is preferred to always offer frame pointers as a config +# option on the architecture (regardless of KERNEL_DEBUG): +# +config ARCH_WANT_FRAME_POINTERS + bool + help + config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ -- cgit v0.10.2 From b2b815d80a5c4e5b50be0a98aba8c445ce8f3e1f Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 16 Jan 2009 15:22:16 -0800 Subject: x86: put trigger in to detect mismatched apic versions Impact: add debug warning Fire off one message if two apic's discovered with different apic versions. (this code is only called during CPU init) The goal of this is to pave the way of the removal of the apic_version[] array. We dont expect any apic version incompatibilities in the x86 landscape of systems [if so we dont handle them very well and probably never will handle deep apic version assymetries well], but it's prudent to have a debug check for one kernel cycle nevertheless. Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index d19aa3a..4b6df24 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -1837,6 +1837,11 @@ void __cpuinit generic_processor_info(int apicid, int version) num_processors++; cpu = cpumask_next_zero(-1, cpu_present_mask); + if (version != apic_version[boot_cpu_physical_apicid]) + WARN_ONCE(1, + "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n", + apic_version[boot_cpu_physical_apicid], cpu, version); + physid_set(apicid, phys_cpu_present_map); if (apicid == boot_cpu_physical_apicid) { /* -- cgit v0.10.2 From 1d4a7f1c4faf53eb9e822743ec8a70b3019a26d2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 18 Jan 2009 16:39:29 +0100 Subject: hrtimers: fix inconsistent lock state on resume in hres_timers_resume Andrey Borzenkov reported this lockdep assert: > [17854.688347] ================================= > [17854.688347] [ INFO: inconsistent lock state ] > [17854.688347] 2.6.29-rc2-1avb #1 > [17854.688347] --------------------------------- > [17854.688347] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. > [17854.688347] pm-suspend/18240 [HC0[0]:SC0[0]:HE1:SE1] takes: > [17854.688347] (&cpu_base->lock){++..}, at: [] retrigger_next_event+0x5c/0xa0 > [17854.688347] {in-hardirq-W} state was registered at: > [17854.688347] [] __lock_acquire+0x79d/0x1930 > [17854.688347] [] lock_acquire+0x5c/0x80 > [17854.688347] [] _spin_lock+0x35/0x70 > [17854.688347] [] hrtimer_run_queues+0x31/0x140 > [17854.688347] [] run_local_timers+0x8/0x20 > [17854.688347] [] update_process_times+0x23/0x60 > [17854.688347] [] tick_periodic+0x24/0x80 > [17854.688347] [] tick_handle_periodic+0x12/0x70 > [17854.688347] [] timer_interrupt+0x14/0x20 > [17854.688347] [] handle_IRQ_event+0x29/0x60 > [17854.688347] [] handle_level_irq+0x69/0xe0 > [17854.688347] [] 0xffffffff > [17854.688347] irq event stamp: 55771 > [17854.688347] hardirqs last enabled at (55771): [] _spin_unlock_irqrestore+0x35/0x60 > [17854.688347] hardirqs last disabled at (55770): [] _spin_lock_irqsave+0x19/0x80 > [17854.688347] softirqs last enabled at (54836): [] __do_softirq+0xc4/0x110 > [17854.688347] softirqs last disabled at (54831): [] do_softirq+0x8e/0xe0 > [17854.688347] > [17854.688347] other info that might help us debug this: > [17854.688347] 3 locks held by pm-suspend/18240: > [17854.688347] #0: (&buffer->mutex){--..}, at: [] sysfs_write_file+0x25/0x100 > [17854.688347] #1: (pm_mutex){--..}, at: [] enter_state+0x4f/0x140 > [17854.688347] #2: (dpm_list_mtx){--..}, at: [] device_pm_lock+0xf/0x20 > [17854.688347] > [17854.688347] stack backtrace: > [17854.688347] Pid: 18240, comm: pm-suspend Not tainted 2.6.29-rc2-1avb #1 > [17854.688347] Call Trace: > [17854.688347] [] ? printk+0x18/0x20 > [17854.688347] [] print_usage_bug+0x16c/0x1d0 > [17854.688347] [] mark_lock+0x8bf/0xc90 > [17854.688347] [] ? pit_next_event+0x2f/0x40 > [17854.688347] [] __lock_acquire+0x580/0x1930 > [17854.688347] [] ? _spin_unlock+0x1d/0x20 > [17854.688347] [] ? pit_next_event+0x2f/0x40 > [17854.688347] [] ? clockevents_program_event+0x98/0x160 > [17854.688347] [] ? mark_held_locks+0x48/0x90 > [17854.688347] [] ? _spin_unlock_irqrestore+0x35/0x60 > [17854.688347] [] ? trace_hardirqs_on_caller+0x139/0x190 > [17854.688347] [] ? trace_hardirqs_on+0xb/0x10 > [17854.688347] [] lock_acquire+0x5c/0x80 > [17854.688347] [] ? retrigger_next_event+0x5c/0xa0 > [17854.688347] [] _spin_lock+0x35/0x70 > [17854.688347] [] ? retrigger_next_event+0x5c/0xa0 > [17854.688347] [] retrigger_next_event+0x5c/0xa0 > [17854.688347] [] hres_timers_resume+0xa/0x10 > [17854.688347] [] timekeeping_resume+0xee/0x150 > [17854.688347] [] __sysdev_resume+0x14/0x50 > [17854.688347] [] sysdev_resume+0x47/0x80 > [17854.688347] [] device_power_up+0xb/0x20 > [17854.688347] [] suspend_devices_and_enter+0xcf/0x150 > [17854.688347] [] ? freeze_processes+0x3f/0x90 > [17854.688347] [] enter_state+0xf4/0x140 > [17854.688347] [] state_store+0x7d/0xc0 > [17854.688347] [] ? state_store+0x0/0xc0 > [17854.688347] [] kobj_attr_store+0x24/0x30 > [17854.688347] [] sysfs_write_file+0x9c/0x100 > [17854.688347] [] vfs_write+0x9c/0x160 > [17854.688347] [] ? restore_nocheck_notrace+0x0/0xe > [17854.688347] [] ? sysfs_write_file+0x0/0x100 > [17854.688347] [] sys_write+0x3d/0x70 > [17854.688347] [] sysenter_do_call+0x12/0x31 Andrey's analysis: > timekeeping_resume() is called via class ->resume > method; and according to comments in sysdev_resume() and > device_power_up(), they are called with interrupts disabled. > > Looking at suspend_enter, irqs *are* disabled at this point. > > So it actually looks like something (may be some driver) > unconditionally enabled irqs in resume path. Add a debug check to test this theory. If it triggers then it triggers because the resume code calls it with irqs enabled, which is a no-no not just for timekeeping_resume(), but also bad for a number of other resume handlers. Reported-by: Andrey Borzenkov Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 1455b76..cb83c6d 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -614,7 +614,9 @@ void clock_was_set(void) */ void hres_timers_resume(void) { - /* Retrigger the CPU local events: */ + WARN_ONCE(!irqs_disabled(), + KERN_INFO "hres_timers_resume() called with IRQs enabled!"); + retrigger_next_event(NULL); } -- cgit v0.10.2 From c7f8562a51c2e5dcc1a00a2bdd232b9965ff960d Mon Sep 17 00:00:00 2001 From: Leonardo Potenza Date: Sun, 18 Jan 2009 23:03:56 +0100 Subject: x86: fix section mismatch warnings in kernel/setup_percpu.c The function setup_cpu_local_masks() has been marked __init, in order to remove the following section mismatch messages: WARNING: vmlinux.o(.text+0x3c2c7): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2d3): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2df): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2eb): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. Signed-off-by: Leonardo Potenza Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 55c4607..0116107 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -136,7 +136,7 @@ static void __init setup_cpu_pda_map(void) #ifdef CONFIG_X86_64 /* correctly size the local cpu masks */ -static void setup_cpu_local_masks(void) +static void __init setup_cpu_local_masks(void) { alloc_bootmem_cpumask_var(&cpu_initialized_mask); alloc_bootmem_cpumask_var(&cpu_callin_mask); -- cgit v0.10.2 From f90d4118bacef87894621a3e8aba853fa0c89abc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 16 Jan 2009 10:24:10 +0800 Subject: cpuset: fix possible deadlock in async_rebuild_sched_domains Lockdep reported some possible circular locking info when we tested cpuset on NUMA/fake NUMA box. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.29-rc1-00224-ga652504 #111 ------------------------------------------------------- bash/2968 is trying to acquire lock: (events){--..}, at: [] flush_work+0x24/0xd8 but task is already holding lock: (cgroup_mutex){--..}, at: [] cgroup_lock_live_group+0x12/0x29 which lock already depends on the new lock. ...... ------------------------------------------------------- Steps to reproduce: # mkdir /dev/cpuset # mount -t cpuset xxx /dev/cpuset # mkdir /dev/cpuset/0 # echo 0 > /dev/cpuset/0/cpus # echo 0 > /dev/cpuset/0/mems # echo 1 > /dev/cpuset/0/memory_migrate # cat /dev/zero > /dev/null & # echo $! > /dev/cpuset/0/tasks This is because async_rebuild_sched_domains has the following lock sequence: run_workqueue(async_rebuild_sched_domains) -> do_rebuild_sched_domains -> cgroup_lock But, attaching tasks when memory_migrate is set has following: cgroup_lock_live_group(cgroup_tasks_write) -> do_migrate_pages -> flush_work This patch fixes it by using a separate workqueue thread. Signed-off-by: Miao Xie Signed-off-by: Lai Jiangshan Signed-off-by: Ingo Molnar diff --git a/kernel/cpuset.c b/kernel/cpuset.c index a856788..f76db9d 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -61,6 +61,14 @@ #include /* + * Workqueue for cpuset related tasks. + * + * Using kevent workqueue may cause deadlock when memory_migrate + * is set. So we create a separate workqueue thread for cpuset. + */ +static struct workqueue_struct *cpuset_wq; + +/* * Tracks how many cpusets are currently defined in system. * When there is only one cpuset (the root cpuset) we can * short circuit some hooks. @@ -831,7 +839,7 @@ static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains); */ static void async_rebuild_sched_domains(void) { - schedule_work(&rebuild_sched_domains_work); + queue_work(cpuset_wq, &rebuild_sched_domains_work); } /* @@ -2111,6 +2119,9 @@ void __init cpuset_init_smp(void) hotcpu_notifier(cpuset_track_online_cpus, 0); hotplug_memory_notifier(cpuset_track_online_nodes, 10); + + cpuset_wq = create_singlethread_workqueue("cpuset"); + BUG_ON(!cpuset_wq); } /** -- cgit v0.10.2 From ab596ad8972f314ace538799734c7e1bdd1da2ff Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:02:57 +0100 Subject: xfs: fix dentry aliasing issues in open_by_handle Open by handle just grabs an inode by handle and then creates itself a dentry for it. While this works for regular files it is horribly broken for directories, where the VFS locking relies on the fact that there is only just one single dentry for a given inode, and that these are always connected to the root of the filesystem so that it's locking algorithms work (see Documentations/filesystems/Locking) Remove all the existing open by handle code and replace it with a small wrapper around the exportfs code which deals with all these issues. At the same time we also make the checks for a valid handle strict enough to reject all not perfectly well formed handles - given that we never hand out others that's okay and simplifies the code. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index 3f53dd1..29228f5 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -1,6 +1,7 @@ config XFS_FS tristate "XFS filesystem support" depends on BLOCK + select EXPORTFS help XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index e5be1e0..4bd1123 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -50,12 +50,14 @@ #include "xfs_vnodeops.h" #include "xfs_quota.h" #include "xfs_inode_item.h" +#include "xfs_export.h" #include #include #include #include #include +#include /* * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to @@ -164,97 +166,69 @@ xfs_find_handle( return 0; } - /* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. + * No need to do permission checks on the various pathname components + * as the handle operations are privileged. */ STATIC int -xfs_vget_fsop_handlereq( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - xfs_fsop_handlereq_t *hreq, - struct inode **inode) +xfs_handle_acceptable( + void *context, + struct dentry *dentry) +{ + return 1; +} + +/* + * Convert userspace handle data into a dentry. + */ +struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; + struct xfs_fid64 fid; /* * Only allow handle opens under a directory. */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = hreq->ihandle; - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); + if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode)) + return ERR_PTR(-ENOTDIR); + + if (hlen != sizeof(xfs_handle_t)) + return ERR_PTR(-EINVAL); + if (copy_from_user(&handle, uhandle, hlen)) + return ERR_PTR(-EFAULT); + if (handle.ha_fid.fid_len != + sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len)) + return ERR_PTR(-EINVAL); + + memset(&fid, 0, sizeof(struct fid)); + fid.ino = handle.ha_fid.fid_ino; + fid.gen = handle.ha_fid.fid_gen; + + return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3, + FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG, + xfs_handle_acceptable, NULL); +} - *inode = VFS_I(ip); - return 0; +STATIC struct dentry * +xfs_handlereq_to_dentry( + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) +{ + return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen); } int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode) + xfs_fsop_handlereq_t *hreq) { const struct cred *cred = current_cred(); int error; - int new_fd; + int fd; int permflag; struct file *filp; struct inode *inode; @@ -263,19 +237,21 @@ xfs_open_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + inode = dentry->d_inode; /* Restrict xfs_open_by_handle to directories & regular files. */ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) { - iput(inode); - return -XFS_ERROR(EINVAL); + error = -XFS_ERROR(EPERM); + goto out_dput; } #if BITS_PER_LONG != 32 hreq->oflags |= O_LARGEFILE; #endif + /* Put open permission in namei format. */ permflag = hreq->oflags; if ((permflag+1) & O_ACCMODE) @@ -285,50 +261,45 @@ xfs_open_by_handle( if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) && (permflag & FMODE_WRITE) && IS_APPEND(inode)) { - iput(inode); - return -XFS_ERROR(EPERM); + error = -XFS_ERROR(EPERM); + goto out_dput; } if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) { - iput(inode); - return -XFS_ERROR(EACCES); + error = -XFS_ERROR(EACCES); + goto out_dput; } /* Can't write directories. */ - if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { - iput(inode); - return -XFS_ERROR(EISDIR); + if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { + error = -XFS_ERROR(EISDIR); + goto out_dput; } - if ((new_fd = get_unused_fd()) < 0) { - iput(inode); - return new_fd; + fd = get_unused_fd(); + if (fd < 0) { + error = fd; + goto out_dput; } - dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - put_unused_fd(new_fd); - return PTR_ERR(dentry); - } - - /* Ensure umount returns EBUSY on umounts while this file is open. */ - mntget(parfilp->f_path.mnt); - - /* Create file pointer. */ - filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred); + filp = dentry_open(dentry, mntget(parfilp->f_path.mnt), + hreq->oflags, cred); if (IS_ERR(filp)) { - put_unused_fd(new_fd); - return -XFS_ERROR(-PTR_ERR(filp)); + put_unused_fd(fd); + return PTR_ERR(filp); } if (inode->i_mode & S_IFREG) { - /* invisible operation should not change atime */ filp->f_flags |= O_NOATIME; filp->f_mode |= FMODE_NOCMTIME; } - fd_install(new_fd, filp); - return new_fd; + fd_install(fd, filp); + return fd; + + out_dput: + dput(dentry); + return error; } /* @@ -359,11 +330,10 @@ do_readlink( int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode) + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) { - struct inode *inode; + struct dentry *dentry; __u32 olen; void *link; int error; @@ -371,26 +341,28 @@ xfs_readlink_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); /* Restrict this handle operation to symlinks only. */ - if (!S_ISLNK(inode->i_mode)) { + if (!S_ISLNK(dentry->d_inode->i_mode)) { error = -XFS_ERROR(EINVAL); - goto out_iput; + goto out_dput; } if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) { error = -XFS_ERROR(EFAULT); - goto out_iput; + goto out_dput; } link = kmalloc(MAXPATHLEN+1, GFP_KERNEL); - if (!link) - goto out_iput; + if (!link) { + error = -XFS_ERROR(ENOMEM); + goto out_dput; + } - error = -xfs_readlink(XFS_I(inode), link); + error = -xfs_readlink(XFS_I(dentry->d_inode), link); if (error) goto out_kfree; error = do_readlink(hreq->ohandle, olen, link); @@ -399,32 +371,31 @@ xfs_readlink_by_handle( out_kfree: kfree(link); - out_iput: - iput(inode); + out_dput: + dput(dentry); return error; } STATIC int xfs_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -434,24 +405,23 @@ xfs_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } STATIC int xfs_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { - int error; + int error = -ENOMEM; attrlist_cursor_kern_t *cursor; xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -467,16 +437,16 @@ xfs_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -486,10 +456,9 @@ xfs_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } int @@ -564,15 +533,13 @@ xfs_attrmulti_attr_remove( STATIC int xfs_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, struct file *parfilp, - struct inode *parinode) + void __user *arg) { int error; xfs_attr_multiop_t *ops; xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -581,19 +548,19 @@ xfs_attrmulti_by_handle( if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, am_hreq.ops, size)) @@ -615,25 +582,28 @@ xfs_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, ops[i].am_attrvalue, - &ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, &ops[i].am_length, + ops[i].am_flags); break; case ATTR_OP_SET: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, ops[i].am_attrvalue, - ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, ops[i].am_length, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; default: @@ -647,9 +617,8 @@ xfs_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } @@ -1440,23 +1409,23 @@ xfs_file_ioctl( if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_FSSETDM_BY_HANDLE: - return xfs_fssetdm_by_handle(mp, arg, inode); + return xfs_fssetdm_by_handle(filp, arg); case XFS_IOC_READLINK_BY_HANDLE: { xfs_fsop_handlereq_t hreq; if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE: - return xfs_attrlist_by_handle(mp, arg, inode); + return xfs_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE: - return xfs_attrmulti_by_handle(mp, arg, filp, inode); + return xfs_attrmulti_by_handle(filp, arg); case XFS_IOC_SWAPEXT: { struct xfs_swapext sxp; diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h index 8c16bf2..7bd7c6a 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.h +++ b/fs/xfs/linux-2.6/xfs_ioctl.h @@ -34,16 +34,13 @@ xfs_find_handle( extern int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode); + xfs_fsop_handlereq_t *hreq); extern int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode); + struct file *parfilp, + xfs_fsop_handlereq_t *hreq); extern int xfs_attrmulti_attr_get( @@ -67,6 +64,12 @@ xfs_attrmulti_attr_remove( char *name, __uint32_t flags); +extern struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen); + extern long xfs_file_ioctl( struct file *filp, diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index 50903ad..fd43620 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -340,96 +340,24 @@ xfs_compat_handlereq_copyin( return 0; } -/* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. - */ -STATIC int -xfs_vget_fsop_handlereq_compat( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - compat_xfs_fsop_handlereq_t *hreq, - struct inode **inode) +STATIC struct dentry * +xfs_compat_handlereq_to_dentry( + struct file *parfilp, + compat_xfs_fsop_handlereq_t *hreq) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; - xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; - - /* - * Only allow handle opens under a directory. - */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = compat_ptr(hreq->ihandle); - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - *inode = VFS_I(ip); - return 0; + return xfs_handle_to_dentry(parfilp, + compat_ptr(hreq->ihandle), hreq->ihandlen); } STATIC int xfs_compat_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; attrlist_cursor_kern_t *cursor; compat_xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -446,17 +374,17 @@ xfs_compat_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + error = -ENOMEM; kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -466,22 +394,20 @@ xfs_compat_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } STATIC int xfs_compat_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; compat_xfs_attr_multiop_t *ops; compat_xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -491,20 +417,19 @@ xfs_compat_attrmulti_by_handle( sizeof(compat_xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, compat_ptr(am_hreq.ops), size)) @@ -527,20 +452,21 @@ xfs_compat_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_REMOVE: - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); break; default: ops[i].am_error = EINVAL; @@ -553,22 +479,20 @@ xfs_compat_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } STATIC int xfs_compat_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; compat_xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); @@ -576,12 +500,11 @@ xfs_compat_fssetdm_by_handle( sizeof(compat_xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq, - &inode); - if (error) - return -error; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -591,11 +514,11 @@ xfs_compat_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } @@ -722,21 +645,21 @@ xfs_file_compat_ioctl( if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_READLINK_BY_HANDLE_32: { struct xfs_fsop_handlereq hreq; if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE_32: - return xfs_compat_attrlist_by_handle(mp, arg, inode); + return xfs_compat_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE_32: - return xfs_compat_attrmulti_by_handle(mp, arg, inode); + return xfs_compat_attrmulti_by_handle(filp, arg); case XFS_IOC_FSSETDM_BY_HANDLE_32: - return xfs_compat_fssetdm_by_handle(mp, arg, inode); + return xfs_compat_fssetdm_by_handle(filp, arg); default: return -XFS_ERROR(ENOIOCTLCMD); } -- cgit v0.10.2 From 62e194ecdaf8a1935991c1f8704886328d96a391 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:03 +0100 Subject: xfs: use mnt_want_write in compat_attrmulti ioctl The compat version of the attrmulti ioctl needs to ask for and then later release write access to the mount just like the native version, otherwise we could potentially write to read-only mounts. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index fd43620..c70c4e3 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -17,6 +17,7 @@ */ #include #include +#include #include #include "xfs.h" #include "xfs_fs.h" @@ -458,15 +459,23 @@ xfs_compat_attrmulti_by_handle( &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; ops[i].am_error = xfs_attrmulti_attr_set( dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; ops[i].am_error = xfs_attrmulti_attr_remove( dentry->d_inode, attr_name, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; default: ops[i].am_error = EINVAL; -- cgit v0.10.2 From 080dda7f5e8e8df95bcd17a5345c276e365a2054 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:11 +0100 Subject: xfs: add a separate lock class for the per-mount list of dquots We can have both a a quota hash chain and the per-mount list locked at the same time. But given that both use the same struct dqhash as list head we have to tell lockdep that they are different lock classes. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 6b13960..7a2beb6 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1070,6 +1070,13 @@ xfs_qm_sync( return 0; } +/* + * The hash chains and the mplist use the same xfs_dqhash structure as + * their list head, but we can take the mplist qh_lock and one of the + * hash qh_locks at the same time without any problem as they aren't + * related. + */ +static struct lock_class_key xfs_quota_mplist_class; /* * This initializes all the quota information that's kept in the @@ -1105,6 +1112,8 @@ xfs_qm_init_quotainfo( } xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0); + lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class); + qinf->qi_dqreclaims = 0; /* mutex used to serialize quotaoffs */ -- cgit v0.10.2 From 4f2d4ac6e5eb7d72e8df7f3fbf67a78dab8b91cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:19 +0100 Subject: xfs: lockdep annotations for xfs_dqlock2 xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the dquot with the lower id first. Use mutex_lock_nested to tell lockdep about this fact. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 591ca66..36d1bb6 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -1383,6 +1383,12 @@ xfs_dqunlock_nonotify( mutex_unlock(&(dqp->q_qlock)); } +/* + * Lock two xfs_dquot structures. + * + * To avoid deadlocks we always lock the quota structure with + * the lowerd id first. + */ void xfs_dqlock2( xfs_dquot_t *d1, @@ -1392,18 +1398,16 @@ xfs_dqlock2( ASSERT(d1 != d2); if (be32_to_cpu(d1->q_core.d_id) > be32_to_cpu(d2->q_core.d_id)) { - xfs_dqlock(d2); - xfs_dqlock(d1); + mutex_lock(&d2->q_qlock); + mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED); } else { - xfs_dqlock(d1); - xfs_dqlock(d2); - } - } else { - if (d1) { - xfs_dqlock(d1); - } else if (d2) { - xfs_dqlock(d2); + mutex_lock(&d1->q_qlock); + mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED); } + } else if (d1) { + mutex_lock(&d1->q_qlock); + } else if (d2) { + mutex_lock(&d2->q_qlock); } } diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 7e455337..d443e93 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -97,6 +97,16 @@ typedef struct xfs_dquot { #define dq_hashlist q_lists.dqm_hashlist #define dq_flags q_lists.dqm_flags +/* + * Lock hierachy for q_qlock: + * XFS_QLOCK_NORMAL is the implicit default, + * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2 + */ +enum { + XFS_QLOCK_NORMAL = 0, + XFS_QLOCK_NESTED, +}; + #define XFS_DQHOLD(dqp) ((dqp)->q_nrefs++) #ifdef DEBUG -- cgit v0.10.2 From 5aa2dc0a0697c762874241fa9ddbecd2d878b934 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:25 +0100 Subject: xfs: add a lock class for group/project dquots We can have both a user and a group/project dquot locked at the same time, as long as the user dquot is locked first. Tell lockdep about that fact by making the group/project dquots a different lock class. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 36d1bb6..f0bc784 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -73,6 +73,8 @@ int xfs_dqreq_num; int xfs_dqerror_mod = 33; #endif +static struct lock_class_key xfs_dquot_other_class; + /* * Allocate and initialize a dquot. We don't always allocate fresh memory; * we try to reclaim a free dquot if the number of incore dquots are above @@ -139,7 +141,15 @@ xfs_qm_dqinit( ASSERT(dqp->q_trace); xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT"); #endif - } + } + + /* + * In either case we need to make sure group quotas have a different + * lock class than user quotas, to make sure lockdep knows we can + * locks of one of each at the same time. + */ + if (!(type & XFS_DQ_USER)) + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); /* * log item gets initialized later -- cgit v0.10.2 From 49739140e57a65114d9e1976c4c158d2145595fb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:04:07 +0100 Subject: xfs: fix bad_features2 fixups for the root filesystem Currently the bad_features2 fixup and the alignment updates in the superblock are skipped if we mount a filesystem read-only. But for the root filesystem the typical case is to mount read-only first and only later remount writeable so we'll never perform this update at all. It's not a big problem but means the logs of people needing the fixup get spammed at every boot because they never happen on disk. Reported-by: Arkadiusz Miskiewicz Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 95a9710..c71e226 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1197,6 +1197,7 @@ xfs_fs_remount( struct xfs_mount *mp = XFS_M(sb); substring_t args[MAX_OPT_ARGS]; char *p; + int error; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -1247,11 +1248,25 @@ xfs_fs_remount( } } - /* rw/ro -> rw */ + /* ro -> rw */ if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { mp->m_flags &= ~XFS_MOUNT_RDONLY; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); + + /* + * If this is the first remount to writeable state we + * might have some superblock changes to update. + */ + if (mp->m_update_flags) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); + if (error) { + cmn_err(CE_WARN, + "XFS: failed to write sb changes"); + return error; + } + mp->m_update_flags = 0; + } } /* rw -> ro */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 3c97c64..3530025 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -45,7 +45,6 @@ #include "xfs_fsops.h" #include "xfs_utils.h" -STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -682,7 +681,7 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount) * Update alignment values based on mount options and sb values */ STATIC int -xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) +xfs_update_alignment(xfs_mount_t *mp) { xfs_sb_t *sbp = &(mp->m_sb); @@ -736,11 +735,11 @@ xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) if (xfs_sb_version_hasdalign(sbp)) { if (sbp->sb_unit != mp->m_dalign) { sbp->sb_unit = mp->m_dalign; - *update_flags |= XFS_SB_UNIT; + mp->m_update_flags |= XFS_SB_UNIT; } if (sbp->sb_width != mp->m_swidth) { sbp->sb_width = mp->m_swidth; - *update_flags |= XFS_SB_WIDTH; + mp->m_update_flags |= XFS_SB_WIDTH; } } } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && @@ -905,7 +904,6 @@ xfs_mountfs( xfs_sb_t *sbp = &(mp->m_sb); xfs_inode_t *rip; __uint64_t resblks; - __int64_t update_flags = 0LL; uint quotamount, quotaflags; int uuid_mounted = 0; int error = 0; @@ -933,7 +931,7 @@ xfs_mountfs( "XFS: correcting sb_features alignment problem"); sbp->sb_features2 |= sbp->sb_bad_features2; sbp->sb_bad_features2 = sbp->sb_features2; - update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; /* * Re-check for ATTR2 in case it was found in bad_features2 @@ -947,11 +945,11 @@ xfs_mountfs( if (xfs_sb_version_hasattr2(&mp->m_sb) && (mp->m_flags & XFS_MOUNT_NOATTR2)) { xfs_sb_version_removeattr2(&mp->m_sb); - update_flags |= XFS_SB_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2; /* update sb_versionnum for the clearing of the morebits */ if (!sbp->sb_features2) - update_flags |= XFS_SB_VERSIONNUM; + mp->m_update_flags |= XFS_SB_VERSIONNUM; } /* @@ -960,7 +958,7 @@ xfs_mountfs( * allocator alignment is within an ag, therefore ag has * to be aligned at stripe boundary. */ - error = xfs_update_alignment(mp, &update_flags); + error = xfs_update_alignment(mp); if (error) goto error1; @@ -1137,10 +1135,12 @@ xfs_mountfs( } /* - * If fs is not mounted readonly, then update the superblock changes. + * If this is a read-only mount defer the superblock updates until + * the next remount into writeable mode. Otherwise we would never + * perform the update e.g. for the root filesystem. */ - if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { - error = xfs_mount_log_sb(mp, update_flags); + if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); if (error) { cmn_err(CE_WARN, "XFS: failed to write sb changes"); goto error4; @@ -1820,7 +1820,7 @@ xfs_uuid_mount( * be altered by the mount options, as well as any potential sb_features2 * fixup. Only the first superblock is updated. */ -STATIC int +int xfs_mount_log_sb( xfs_mount_t *mp, __int64_t fields) diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index c1e0284..e37eff6 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -327,6 +327,8 @@ typedef struct xfs_mount { spinlock_t m_sync_lock; /* work item list lock */ int m_sync_seq; /* sync thread generation no. */ wait_queue_head_t m_wait_single_sync_task; + __int64_t m_update_flags; /* sb flags we need to update + on the next remount,rw */ } xfs_mount_t; /* @@ -514,6 +516,7 @@ extern int xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t, int64_t, int); extern int xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *, uint, int); +extern int xfs_mount_log_sb(xfs_mount_t *, __int64_t); extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int); extern int xfs_readsb(xfs_mount_t *, int); extern void xfs_freesb(xfs_mount_t *); -- cgit v0.10.2 From b828d8c33867dd6479644c06500975570bfd525c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:04:16 +0100 Subject: xfs: sanity check attr fork size Recently we have quite a few kerneloops reports about dereferencing a NULL if_data in the attribute fork. From looking over the code this can only happen if we pass a 0 size argument to xfs_iformat_local. This implies some sort of corruption and in fact the only mailinglist report about this from earlier this year was after a powerfail presumably on a system with write cache and without barriers. Add a quick sanity check for the attr fork size in xfs_iformat to catch these early and without an oops. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 5a5e035..323ecd7 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -424,6 +424,19 @@ xfs_iformat( case XFS_DINODE_FMT_LOCAL: atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip); size = be16_to_cpu(atp->hdr.totsize); + + if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) { + xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount, + "corrupt inode %Lu " + "(bad attr fork size %Ld).", + (unsigned long long) ip->i_ino, + (long long) size); + XFS_CORRUPTION_ERROR("xfs_iformat(8)", + XFS_ERRLEVEL_LOW, + ip->i_mount, dip); + return XFS_ERROR(EFSCORRUPTED); + } + error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size); break; case XFS_DINODE_FMT_EXTENTS: -- cgit v0.10.2 From b6e3222732a3551e786aa47b90a8eab2a517711c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 14 Jan 2009 23:22:07 -0600 Subject: [XFS] Remove the rest of the macro-to-function indirections. Remove the last of the macros-defined-to-static-functions. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index f0bc784..6543c0b 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -431,7 +431,7 @@ xfs_qm_dqalloc( /* * Initialize the bmap freelist prior to calling bmapi code. */ - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); xfs_ilock(quotip, XFS_ILOCK_EXCL); /* * Return if this type of quotas is turned off while we didn't diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index d3b3cf7..143d63e 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -244,8 +244,8 @@ typedef struct xfs_perag #define XFS_AG_CHECK_DADDR(mp,d,len) \ ((len) == 1 ? \ ASSERT((d) == XFS_SB_DADDR || \ - XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \ - ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \ - XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1))) + xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \ + ASSERT(xfs_daddr_to_agno(mp, d) == \ + xfs_daddr_to_agno(mp, (d) + (len) - 1))) #endif /* __XFS_AG_H__ */ diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c index 733cb75..c10c3a2 100644 --- a/fs/xfs/xfs_alloc_btree.c +++ b/fs/xfs/xfs_alloc_btree.c @@ -115,7 +115,7 @@ xfs_allocbt_free_block( xfs_agblock_t bno; int error; - bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp)); + bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp)); error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1); if (error) return error; diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index f7cdc28..5fde165 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -374,7 +374,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, * It won't fit in the shortform, transform to a leaf block. * GROT: another possible req'mt for a double-split btree op. */ - XFS_BMAP_INIT(args.flist, args.firstblock); + xfs_bmap_init(args.flist, args.firstblock); error = xfs_attr_shortform_to_leaf(&args); if (!error) { error = xfs_bmap_finish(&args.trans, args.flist, @@ -956,7 +956,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * Commit that transaction so that the node_addname() call * can manage its own transactions. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1057,7 +1057,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1135,7 +1135,7 @@ xfs_attr_leaf_removename(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1290,7 +1290,7 @@ restart: * have been a b-tree. */ xfs_da_state_free(state); - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1331,7 +1331,7 @@ restart: * in the index/blkno/rmtblkno/rmtblkcnt fields and * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_split(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1443,7 +1443,7 @@ restart: * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1579,7 +1579,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1630,7 +1630,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) == XFS_ATTR_LEAF_MAGIC); if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -2069,7 +2069,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Allocate a single extent, up to the size of the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno, blkcnt, @@ -2123,7 +2123,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2188,7 +2188,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2229,7 +2229,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) blkcnt = args->rmtblkcnt; done = 0; while (!done) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, 1, args->firstblock, args->flist, diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 138308e..c852cd6 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -595,9 +595,9 @@ xfs_bmap_add_extent( xfs_iext_insert(ifp, 0, 1, new); ASSERT(cur == NULL); ifp->if_lastex = 0; - if (!ISNULLSTARTBLOCK(new->br_startblock)) { + if (!isnullstartblock(new->br_startblock)) { XFS_IFORK_NEXT_SET(ip, whichfork, 1); - logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else logflags = 0; /* DELTA: single new extent */ @@ -613,7 +613,7 @@ xfs_bmap_add_extent( /* * Any kind of new delayed allocation goes here. */ - else if (ISNULLSTARTBLOCK(new->br_startblock)) { + else if (isnullstartblock(new->br_startblock)) { if (cur) ASSERT((cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL) == 0); @@ -644,11 +644,11 @@ xfs_bmap_add_extent( * in a delayed or unwritten allocation with a real one, or * converting real back to unwritten. */ - if (!ISNULLSTARTBLOCK(new->br_startblock) && + if (!isnullstartblock(new->br_startblock) && new->br_startoff + new->br_blockcount > prev.br_startoff) { if (prev.br_state != XFS_EXT_UNWRITTEN && - ISNULLSTARTBLOCK(prev.br_startblock)) { - da_old = STARTBLOCKVAL(prev.br_startblock); + isnullstartblock(prev.br_startblock)) { + da_old = startblockval(prev.br_startblock); if (cur) ASSERT(cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL); @@ -803,7 +803,7 @@ xfs_bmap_add_extent_delay_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -820,7 +820,7 @@ xfs_bmap_add_extent_delay_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1019,8 +1019,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1067,10 +1067,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx + 1); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1110,8 +1110,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1157,10 +1157,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1213,7 +1213,7 @@ xfs_bmap_add_extent_delay_real( } temp = xfs_bmap_worst_indlen(ip, temp); temp2 = xfs_bmap_worst_indlen(ip, temp2); - diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) - + diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); if (diff > 0 && xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) { @@ -1241,11 +1241,11 @@ xfs_bmap_add_extent_delay_real( } } ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK); XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2), - NULLSTARTBLOCK((int)temp2)); + nullstartblock((int)temp2)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); *dnew = temp + temp2; /* DELTA: One in-core extent is split in three. */ @@ -1365,7 +1365,7 @@ xfs_bmap_add_extent_unwritten_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -1382,7 +1382,7 @@ xfs_bmap_add_extent_unwritten_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1889,13 +1889,13 @@ xfs_bmap_add_extent_hole_delay( ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); ep = xfs_iext_get_ext(ifp, idx); state = 0; - ASSERT(ISNULLSTARTBLOCK(new->br_startblock)); + ASSERT(isnullstartblock(new->br_startblock)); /* * Check and set flags if this segment has a left neighbor */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if the current (right) segment exists. @@ -1905,7 +1905,7 @@ xfs_bmap_add_extent_hole_delay( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * Set contiguity flags on the left and right neighbors. @@ -1938,12 +1938,12 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK); @@ -1964,11 +1964,11 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); ip->i_df.if_lastex = idx - 1; @@ -1985,11 +1985,11 @@ xfs_bmap_add_extent_hole_delay( */ XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK); temp = new->br_blockcount + right.br_blockcount; - oldlen = STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_allf(ep, new->br_startoff, - NULLSTARTBLOCK((int)newlen), temp, right.br_state); + nullstartblock((int)newlen), temp, right.br_state); XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK); ip->i_df.if_lastex = idx; /* DELTA: One in-core extent grew into a hole. */ @@ -2085,7 +2085,7 @@ xfs_bmap_add_extent_hole_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if this segment has a current value. @@ -2095,7 +2095,7 @@ xfs_bmap_add_extent_hole_real( idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * We're inserting a real allocation between "left" and "right". @@ -2143,7 +2143,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) - 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2185,7 +2185,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork); ifp->if_lastex = idx - 1; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2220,7 +2220,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork); ifp->if_lastex = idx; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2254,7 +2254,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2482,7 +2482,7 @@ xfs_bmap_adjacent( * try to use it's last block as our starting point. */ if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount, ap->prevp->br_startblock)) { ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount; @@ -2511,7 +2511,7 @@ xfs_bmap_adjacent( * start block based on it. */ if (ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && (prevbno = ap->prevp->br_startblock + ap->prevp->br_blockcount) && ISVALID(prevbno, ap->prevp->br_startblock)) { @@ -2552,7 +2552,7 @@ xfs_bmap_adjacent( * If there's a following (right) block, select a requested * start block based on it. */ - if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) { + if (!isnullstartblock(ap->gotp->br_startblock)) { /* * Calculate gap to start of next block. */ @@ -3082,7 +3082,7 @@ xfs_bmap_btree_to_extents( ASSERT(ifp->if_broot == NULL); ASSERT((ifp->if_flags & XFS_IFBROOT) == 0); XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS); - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); return 0; } @@ -3136,8 +3136,8 @@ xfs_bmap_del_extent( del_endoff = del->br_startoff + del->br_blockcount; got_endoff = got.br_startoff + got.br_blockcount; ASSERT(got_endoff >= del_endoff); - delay = ISNULLSTARTBLOCK(got.br_startblock); - ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay); + delay = isnullstartblock(got.br_startblock); + ASSERT(isnullstartblock(del->br_startblock) == delay); flags = 0; qfield = 0; error = 0; @@ -3189,7 +3189,7 @@ xfs_bmap_del_extent( } da_old = da_new = 0; } else { - da_old = STARTBLOCKVAL(got.br_startblock); + da_old = startblockval(got.br_startblock); da_new = 0; nblks = 0; do_fx = 0; @@ -3213,7 +3213,7 @@ xfs_bmap_del_extent( XFS_IFORK_NEXTENTS(ip, whichfork) - 1); flags |= XFS_ILOG_CORE; if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_btree_delete(cur, &i))) @@ -3233,7 +3233,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); da_new = temp; @@ -3242,7 +3242,7 @@ xfs_bmap_del_extent( xfs_bmbt_set_startblock(ep, del_endblock); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock, @@ -3262,7 +3262,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); da_new = temp; @@ -3270,7 +3270,7 @@ xfs_bmap_del_extent( } XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, got.br_startoff, @@ -3345,22 +3345,22 @@ xfs_bmap_del_extent( } XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); } else { ASSERT(whichfork == XFS_DATA_FORK); temp = xfs_bmap_worst_indlen(ip, temp); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); temp2 = xfs_bmap_worst_indlen(ip, temp2); - new.br_startblock = NULLSTARTBLOCK((int)temp2); + new.br_startblock = nullstartblock((int)temp2); da_new = temp + temp2; while (da_new > da_old) { if (temp) { temp--; da_new--; xfs_bmbt_set_startblock(ep, - NULLSTARTBLOCK((int)temp)); + nullstartblock((int)temp)); } if (da_new == da_old) break; @@ -3368,7 +3368,7 @@ xfs_bmap_del_extent( temp2--; da_new--; new.br_startblock = - NULLSTARTBLOCK((int)temp2); + nullstartblock((int)temp2); } } } @@ -3545,7 +3545,7 @@ xfs_bmap_extents_to_btree( nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); for (cnt = i = 0; i < nextents; i++) { ep = xfs_iext_get_ext(ifp, i); - if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) { + if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) { arp->l0 = cpu_to_be64(ep->l0); arp->l1 = cpu_to_be64(ep->l1); arp++; cnt++; @@ -3572,7 +3572,7 @@ xfs_bmap_extents_to_btree( xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs)); ASSERT(*curp == NULL); *curp = cur; - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork); return 0; } @@ -3676,7 +3676,7 @@ xfs_bmap_local_to_extents( ip->i_d.di_nblocks = 1; XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L); - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); } else { ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0); xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork); @@ -4082,7 +4082,7 @@ xfs_bmap_add_attrfork( XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); ip->i_afp->if_flags = XFS_IFEXTENTS; logflags = 0; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); switch (ip->i_d.di_format) { case XFS_DINODE_FMT_LOCAL: error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist, @@ -4162,7 +4162,7 @@ xfs_bmap_add_free( ASSERT(bno != NULLFSBLOCK); ASSERT(len > 0); ASSERT(len <= MAXEXTLEN); - ASSERT(!ISNULLSTARTBLOCK(bno)); + ASSERT(!isnullstartblock(bno)); agno = XFS_FSB_TO_AGNO(mp, bno); agbno = XFS_FSB_TO_AGBNO(mp, bno); ASSERT(agno < mp->m_sb.sb_agcount); @@ -4909,7 +4909,7 @@ xfs_bmapi( got.br_startoff = end; inhole = eof || got.br_startoff > bno; wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) && - ISNULLSTARTBLOCK(got.br_startblock); + isnullstartblock(got.br_startblock); /* * First, deal with the hole before the allocated space * that we found, if any. @@ -5028,7 +5028,7 @@ xfs_bmapi( } ip->i_delayed_blks += alen; - abno = NULLSTARTBLOCK(indlen); + abno = nullstartblock(indlen); } else { /* * If first time, allocate and fill in @@ -5144,8 +5144,8 @@ xfs_bmapi( aoff + alen); #ifdef DEBUG if (flags & XFS_BMAPI_DELAY) { - ASSERT(ISNULLSTARTBLOCK(got.br_startblock)); - ASSERT(STARTBLOCKVAL(got.br_startblock) > 0); + ASSERT(isnullstartblock(got.br_startblock)); + ASSERT(startblockval(got.br_startblock) > 0); } ASSERT(got.br_state == XFS_EXT_NORM || got.br_state == XFS_EXT_UNWRITTEN); @@ -5179,7 +5179,7 @@ xfs_bmapi( ASSERT((bno >= obno) || (n == 0)); ASSERT(bno < end); mval->br_startoff = bno; - if (ISNULLSTARTBLOCK(got.br_startblock)) { + if (isnullstartblock(got.br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } else @@ -5201,7 +5201,7 @@ xfs_bmapi( ASSERT(mval->br_blockcount <= len); } else { *mval = got; - if (ISNULLSTARTBLOCK(mval->br_startblock)) { + if (isnullstartblock(mval->br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } @@ -5329,12 +5329,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log whatever the flags say, even if error. Otherwise we might miss * detecting a case where the data is changed, there's an error, @@ -5411,7 +5411,7 @@ xfs_bmapi_single( *fsb = NULLFSBLOCK; return 0; } - ASSERT(!ISNULLSTARTBLOCK(got.br_startblock)); + ASSERT(!isnullstartblock(got.br_startblock)); ASSERT(bno < got.br_startoff + got.br_blockcount); *fsb = got.br_startblock + (bno - got.br_startoff); ifp->if_lastex = lastx; @@ -5543,7 +5543,7 @@ xfs_bunmapi( */ ASSERT(ep != NULL); del = got; - wasdel = ISNULLSTARTBLOCK(del.br_startblock); + wasdel = isnullstartblock(del.br_startblock); if (got.br_startoff < start) { del.br_startoff = start; del.br_blockcount -= start - got.br_startoff; @@ -5638,7 +5638,7 @@ xfs_bunmapi( xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx - 1), &prev); ASSERT(prev.br_state == XFS_EXT_NORM); - ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock)); + ASSERT(!isnullstartblock(prev.br_startblock)); ASSERT(del.br_startblock == prev.br_startblock + prev.br_blockcount); if (prev.br_startoff < start) { @@ -5666,7 +5666,7 @@ xfs_bunmapi( } } if (wasdel) { - ASSERT(STARTBLOCKVAL(del.br_startblock) > 0); + ASSERT(startblockval(del.br_startblock) > 0); /* Update realtime/data freespace, unreserve quota */ if (isrt) { xfs_filblks_t rtexts; @@ -5782,12 +5782,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log inode even in the error case, if the transaction * is dirty we'll need to shut down the filesystem. @@ -5838,7 +5838,7 @@ xfs_getbmapx_fix_eof_hole( if (startblock == DELAYSTARTBLOCK) out->bmv_block = -2; else - out->bmv_block = XFS_FSB_TO_DB(ip, startblock); + out->bmv_block = xfs_fsb_to_db(ip, startblock); fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset); ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) && @@ -5979,7 +5979,7 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = XFS_BMAPI_AFLAG(whichfork) | + bmapi_flags = xfs_bmapi_aflag(whichfork) | ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); /* @@ -6098,7 +6098,7 @@ xfs_bmap_isaeof( */ *aeof = (off >= s.br_startoff && off < s.br_startoff + s.br_blockcount && - ISNULLSTARTBLOCK(s.br_startblock)) || + isnullstartblock(s.br_startblock)) || off >= s.br_startoff + s.br_blockcount; return 0; } diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 284571c..be2979d 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -95,7 +95,6 @@ typedef struct xfs_bmap_free /* need write cache flushing and no */ /* additional allocation alignments */ -#define XFS_BMAPI_AFLAG(w) xfs_bmapi_aflag(w) static inline int xfs_bmapi_aflag(int w) { return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0); @@ -107,7 +106,6 @@ static inline int xfs_bmapi_aflag(int w) #define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL) #define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL) -#define XFS_BMAP_INIT(flp,fbp) xfs_bmap_init(flp,fbp) static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp) { ((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \ diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index ba6b08c..0760d352 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -121,7 +121,7 @@ __xfs_bmbt_get_all( b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); s->br_startblock = (xfs_fsblock_t)b; } #else /* !DEBUG */ @@ -172,7 +172,7 @@ xfs_bmbt_get_startblock( b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)r->l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); return (xfs_fsblock_t)b; #else /* !DEBUG */ return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21); @@ -261,7 +261,7 @@ xfs_bmbt_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | (xfs_bmbt_rec_base_t)xfs_mask64lo(9); @@ -321,7 +321,7 @@ xfs_bmbt_disk_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21))); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = cpu_to_be64( ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | @@ -382,7 +382,7 @@ xfs_bmbt_set_startblock( r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) | (xfs_bmbt_rec_base_t)(v << 21); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(v)) { + if (isnullstartblock(v)) { r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9); r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) | ((xfs_bmbt_rec_base_t)v << 21) | diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h index a4555ab..0e8df00 100644 --- a/fs/xfs/xfs_bmap_btree.h +++ b/fs/xfs/xfs_bmap_btree.h @@ -76,26 +76,22 @@ typedef struct xfs_bmbt_rec_host { #define DSTARTBLOCKMASK \ (((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS) -#define ISNULLSTARTBLOCK(x) isnullstartblock(x) static inline int isnullstartblock(xfs_fsblock_t x) { return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK; } -#define ISNULLDSTARTBLOCK(x) isnulldstartblock(x) static inline int isnulldstartblock(xfs_dfsbno_t x) { return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK; } -#define NULLSTARTBLOCK(k) nullstartblock(k) static inline xfs_fsblock_t nullstartblock(int k) { ASSERT(k < (1 << STARTBLOCKVALBITS)); return STARTBLOCKMASK | (k); } -#define STARTBLOCKVAL(x) startblockval(x) static inline xfs_filblks_t startblockval(xfs_fsblock_t x) { return (xfs_filblks_t)((x) & ~STARTBLOCKMASK); diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 2c3ef20..4681519 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -960,7 +960,7 @@ xfs_btree_buf_to_ptr( ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp, XFS_BUF_ADDR(bp))); else { - ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp, + ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp))); } } @@ -2454,7 +2454,7 @@ xfs_btree_new_iroot( xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs)); *logflags |= - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork); *stat = 1; XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); return 0; @@ -3048,7 +3048,7 @@ xfs_btree_kill_iroot( cur->bc_bufs[level - 1] = NULL; be16_add_cpu(&block->bb_level, -1); xfs_trans_log_inode(cur->bc_tp, ip, - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork)); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork)); cur->bc_nlevels--; out0: XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index a11a839..c45f74f 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1597,7 +1597,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = 1; ASSERT(args->firstblock != NULL); if ((error = xfs_bmapi(tp, dp, bno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| XFS_BMAPI_CONTIG, args->firstblock, args->total, &map, &nmap, args->flist, NULL))) { @@ -1618,7 +1618,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = MIN(XFS_BMAP_MAX_NMAP, count); c = (int)(bno + count - b); if ((error = xfs_bmapi(tp, dp, b, c, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE| XFS_BMAPI_METADATA, args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, @@ -1882,7 +1882,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, * the last block to the place we want to kill. */ if ((error = xfs_bunmapi(tp, dp, dead_blkno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA, + xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA, 0, args->firstblock, args->flist, NULL, &done)) == ENOSPC) { if (w != XFS_DATA_FORK) @@ -1987,7 +1987,7 @@ xfs_da_do_buf( if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno, nfsb, XFS_BMAPI_METADATA | - XFS_BMAPI_AFLAG(whichfork), + xfs_bmapi_aflag(whichfork), NULL, 0, mapp, &nmap, NULL, NULL))) goto exit0; } diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index e6ebbaeb..ab016e5 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -357,7 +357,7 @@ xfs_ialloc_ag_alloc( int ioffset = i << args.mp->m_sb.sb_inodelog; uint isize = sizeof(struct xfs_dinode); - free = XFS_MAKE_IPTR(args.mp, fbuf, i); + free = xfs_make_iptr(args.mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); @@ -937,7 +937,7 @@ nextag: } } } - offset = XFS_IALLOC_FIND_FREE(&rec.ir_free); + offset = xfs_ialloc_find_free(&rec.ir_free); ASSERT(offset >= 0); ASSERT(offset < XFS_INODES_PER_CHUNK); ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % @@ -1279,7 +1279,7 @@ xfs_imap( offset = XFS_INO_TO_OFFSET(mp, ino); ASSERT(offset < mp->m_sb.sb_inopblock); - cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno); + cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno); offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock; imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster); diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h index 50f558a..aeee827 100644 --- a/fs/xfs/xfs_ialloc.h +++ b/fs/xfs/xfs_ialloc.h @@ -39,7 +39,6 @@ struct xfs_trans; /* * Make an inode pointer out of the buffer/offset. */ -#define XFS_MAKE_IPTR(mp,b,o) xfs_make_iptr(mp,b,o) static inline struct xfs_dinode * xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) { @@ -50,7 +49,6 @@ xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) /* * Find a free (set) bit in the inode bitmask. */ -#define XFS_IALLOC_FIND_FREE(fp) xfs_ialloc_find_free(fp) static inline int xfs_ialloc_find_free(xfs_inofree_t *fp) { return xfs_lowbit64(*fp); diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h index 37e5dd0..5580e25 100644 --- a/fs/xfs/xfs_ialloc_btree.h +++ b/fs/xfs/xfs_ialloc_btree.h @@ -36,7 +36,6 @@ typedef __uint64_t xfs_inofree_t; #define XFS_INODES_PER_CHUNK_LOG (XFS_NBBYLOG + 3) #define XFS_INOBT_ALL_FREE ((xfs_inofree_t)-1) -#define XFS_INOBT_MASKN(i,n) xfs_inobt_maskn(i,n) static inline xfs_inofree_t xfs_inobt_maskn(int i, int n) { return (((n) >= XFS_INODES_PER_CHUNK ? \ diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 323ecd7..e7ae08d 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1614,10 +1614,10 @@ xfs_itruncate_finish( * in this file with garbage in them once recovery * runs. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_bunmapi(ntp, ip, first_unmap_block, unmap_len, - XFS_BMAPI_AFLAG(fork) | + xfs_bmapi_aflag(fork) | (sync ? 0 : XFS_BMAPI_ASYNC), XFS_ITRUNC_MAX_EXTENTS, &first_block, &free_list, @@ -2570,7 +2570,7 @@ xfs_iextents_copy( for (i = 0; i < nrecs; i++) { xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); start_block = xfs_bmbt_get_startblock(ep); - if (ISNULLSTARTBLOCK(start_block)) { + if (isnullstartblock(start_block)) { /* * It's a delayed allocation extent, so skip it. */ diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h index 1ff04cc..9957d06 100644 --- a/fs/xfs/xfs_inode_item.h +++ b/fs/xfs/xfs_inode_item.h @@ -111,20 +111,16 @@ typedef struct xfs_inode_log_format_64 { #define XFS_ILI_IOLOCKED_ANY (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED) - -#define XFS_ILOG_FBROOT(w) xfs_ilog_fbroot(w) static inline int xfs_ilog_fbroot(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); } -#define XFS_ILOG_FEXT(w) xfs_ilog_fext(w) static inline int xfs_ilog_fext(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); } -#define XFS_ILOG_FDATA(w) xfs_ilog_fdata(w) static inline int xfs_ilog_fdata(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 911062c..08ce723 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -155,7 +155,7 @@ xfs_imap_to_bmap( iomapp->iomap_bn = IOMAP_DADDR_NULL; iomapp->iomap_flags |= IOMAP_DELAY; } else { - iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block); + iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block); if (ISUNWRITTEN(imap)) iomapp->iomap_flags |= IOMAP_UNWRITTEN; } @@ -261,7 +261,7 @@ xfs_iomap( xfs_iunlock(ip, lockmode); lockmode = 0; - if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) { + if (nimaps && !isnullstartblock(imap.br_startblock)) { xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip, offset, count, iomapp, &imap, flags); break; @@ -491,7 +491,7 @@ xfs_iomap_write_direct( /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag, &firstfsb, 0, &imap, &nimaps, &free_list, NULL); @@ -751,7 +751,7 @@ xfs_iomap_write_allocate( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * it is possible that the extents have changed since @@ -911,7 +911,7 @@ xfs_iomap_write_unwritten( /* * Modify the unwritten extent state of the buffer. */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb, diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index e19d0a8..cf98a80 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -453,7 +453,7 @@ xfs_bulkstat( (chunkidx = agino - gino + 1) < XFS_INODES_PER_CHUNK && /* there are some left allocated */ - XFS_INOBT_MASKN(chunkidx, + xfs_inobt_maskn(chunkidx, XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) { /* * Grab the chunk record. Mark all the @@ -464,7 +464,7 @@ xfs_bulkstat( if (XFS_INOBT_MASK(i) & ~gfree) gcnt++; } - gfree |= XFS_INOBT_MASKN(0, chunkidx); + gfree |= xfs_inobt_maskn(0, chunkidx); irbp->ir_startino = gino; irbp->ir_freecount = gcnt; irbp->ir_free = gfree; @@ -535,7 +535,7 @@ xfs_bulkstat( chunkidx < XFS_INODES_PER_CHUNK; chunkidx += nicluster, agbno += nbcluster) { - if (XFS_INOBT_MASKN(chunkidx, + if (xfs_inobt_maskn(chunkidx, nicluster) & ~gfree) xfs_btree_reada_bufs(mp, agno, agbno, nbcluster); diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index e37eff6..f5e9937 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -44,9 +44,9 @@ typedef struct xfs_trans_reservations { #ifndef __KERNEL__ -#define XFS_DADDR_TO_AGNO(mp,d) \ +#define xfs_daddr_to_agno(mp,d) \ ((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks)) -#define XFS_DADDR_TO_AGBNO(mp,d) \ +#define xfs_daddr_to_agbno(mp,d) \ ((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks)) #else /* __KERNEL__ */ @@ -441,7 +441,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, */ #define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */ -#define XFS_DADDR_TO_AGNO(mp,d) xfs_daddr_to_agno(mp,d) static inline xfs_agnumber_t xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -450,7 +449,6 @@ xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) return (xfs_agnumber_t) ld; } -#define XFS_DADDR_TO_AGBNO(mp,d) xfs_daddr_to_agbno(mp,d) static inline xfs_agblock_t xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d) { diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index 86471bb..58f85e9 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -147,7 +147,7 @@ xfs_rename( xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip, inodes, &num_inodes); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME); cancel_flags = XFS_TRANS_RELEASE_LOG_RES; spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len); diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index edf12c7..c5bb86f 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -120,7 +120,7 @@ xfs_growfs_rt_alloc( if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip))) goto error_cancel; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); /* * Allocate blocks to the bitmap file. */ diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h index f87db53..f76c003 100644 --- a/fs/xfs/xfs_rw.h +++ b/fs/xfs/xfs_rw.h @@ -28,7 +28,6 @@ struct xfs_mount; * file is a real time file or not, because the bmap code * does. */ -#define XFS_FSB_TO_DB(ip,fsb) xfs_fsb_to_db(ip,fsb) static inline xfs_daddr_t xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb) { diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 1ed7191..1b017c6 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -505,7 +505,7 @@ static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) #define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d)) #define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \ - XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d)) + xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d)) #define XFS_FSB_TO_DADDR(mp,fsbno) XFS_AGB_TO_DADDR(mp, \ XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno)) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index f07bf87..0e55c5d 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -862,7 +862,7 @@ xfs_inactive_symlink_rmt( * Find the block(s) so we can inval and unmap them. */ done = 0; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); nmaps = ARRAY_SIZE(mval); if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size), XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps, @@ -1288,7 +1288,7 @@ xfs_inactive( /* * Free the inode. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_ifree(tp, ip, &free_list); if (error) { /* @@ -1461,7 +1461,7 @@ xfs_create( xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT); unlock_dp_on_error = B_TRUE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); ASSERT(ip == NULL); @@ -1879,7 +1879,7 @@ xfs_remove( } } - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_removename(tp, dp, name, ip->i_ino, &first_block, &free_list, resblks); if (error) { @@ -2059,7 +2059,7 @@ xfs_link( if (error) goto error_return; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino, &first_block, &free_list, resblks); @@ -2231,7 +2231,7 @@ xfs_mkdir( xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); unlock_dp_on_error = B_FALSE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino, &first_block, &free_list, resblks ? @@ -2438,7 +2438,7 @@ xfs_symlink( * Initialize the bmap freelist prior to calling either * bmapi or the directory create code. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * Allocate an inode for the symlink. @@ -2860,7 +2860,7 @@ retry: /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bmapi(tp, ip, startoffset_fsb, allocatesize_fsb, bmapi_flag, &firstfsb, 0, imapp, &nimaps, @@ -2980,7 +2980,7 @@ xfs_zero_remaining_bytes( XFS_BUF_UNDONE(bp); XFS_BUF_UNWRITE(bp); XFS_BUF_READ(bp); - XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock)); + XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock)); xfsbdstrat(mp, bp); error = xfs_iowait(bp); if (error) { @@ -3186,7 +3186,7 @@ xfs_free_file_space( /* * issue the bunmapi() call to free the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bunmapi(tp, ip, startoffset_fsb, endoffset_fsb - startoffset_fsb, 0, 2, &firstfsb, &free_list, NULL, &done); -- cgit v0.10.2 From c1ff85d97708550e634fb6fa099c463db90fc40d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 19 Jan 2009 17:17:58 +1000 Subject: drm: fix leak of device mappings since multi-master changes. Device maps now contain a link to the master that created them, so when cleaning up the master, remove any maps that are connected to it. Also delete any remaining maps at driver unload time. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 5ff88d9..14c7a23 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -294,6 +294,7 @@ EXPORT_SYMBOL(drm_init); */ static void drm_cleanup(struct drm_device * dev) { + struct drm_map_list *r_list, *list_temp; DRM_DEBUG("\n"); if (!dev) { @@ -325,6 +326,9 @@ static void drm_cleanup(struct drm_device * dev) drm_ht_remove(&dev->map_hash); drm_ctxbitmap_cleanup(dev); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) + drm_rmmap(dev, r_list->map); + if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 5ca132a..46bb923 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -118,12 +118,20 @@ static void drm_master_destroy(struct kref *kref) struct drm_master *master = container_of(kref, struct drm_master, refcount); struct drm_magic_entry *pt, *next; struct drm_device *dev = master->minor->dev; + struct drm_map_list *r_list, *list_temp; list_del(&master->head); if (dev->driver->master_destroy) dev->driver->master_destroy(dev, master); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) { + if (r_list->master == master) { + drm_rmmap_locked(dev, r_list->map); + r_list = NULL; + } + } + if (master->unique) { drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER); master->unique = NULL; -- cgit v0.10.2 From bb54affa6fbdd6fe80f193ec1b6977a93078785d Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 19 Jan 2009 13:46:56 +0100 Subject: ide: fix IDE PMAC breakage Bartlomiej Zolnierkiewicz writes: > Signed-off-by: Bartlomiej Zolnierkiewicz > --- > drivers/ide/ide-probe.c | 9 ++------- > 1 file changed, 2 insertions(+), 7 deletions(-) > > Index: b/drivers/ide/ide-probe.c > =================================================================== > --- a/drivers/ide/ide-probe.c > +++ b/drivers/ide/ide-probe.c > @@ -640,14 +640,9 @@ static int ide_register_port(ide_hwif_t > /* register with global device tree */ > dev_set_name(&hwif->gendev, hwif->name); > hwif->gendev.driver_data = hwif; > - if (hwif->gendev.parent == NULL) { > - if (hwif->dev) > - hwif->gendev.parent = hwif->dev; > - else > - /* Would like to do = &device_legacy */ > - hwif->gendev.parent = NULL; > - } > + hwif->gendev.parent = hwif->dev; This [bart: commit 96d40941236722777c259775640b8880b7dc6f33 ("ide: small ide_register_port() cleanup")] breaks ide-pmac. It overwrites the parent that pmac_ide_macio_attach has set. Signed-off-by: Andreas Schwab Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 312127e..0db1ed9 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif) /* register with global device tree */ dev_set_name(&hwif->gendev, hwif->name); hwif->gendev.driver_data = hwif; - hwif->gendev.parent = hwif->dev; + if (hwif->gendev.parent == NULL) + hwif->gendev.parent = hwif->dev; hwif->gendev.release = hwif_release_dev; ret = device_register(&hwif->gendev); -- cgit v0.10.2 From abb8817967cc080ee024f7d1a3d5a9830074ca1c Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Mon, 19 Jan 2009 13:46:56 +0100 Subject: ide: fix Falcon IDE breakage [m68k] Falcon IDE: always serialize, in order to force execution of ide_get_lock() and friends. Signed-off-By: Michael Schmitz Cc: Geert Uytterhoeven [bart: set flag in falconide_port_info instead of falconide_init()] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c index a5ba820..a638e95 100644 --- a/drivers/ide/falconide.c +++ b/drivers/ide/falconide.c @@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = { static const struct ide_port_info falconide_port_info = { .tp_ops = &falconide_tp_ops, - .host_flags = IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE, }; static void __init falconide_setup_ports(hw_regs_t *hw) -- cgit v0.10.2 From ef183f6b5982aa10499432a0cb243c92ce623512 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 19 Jan 2009 13:46:57 +0100 Subject: drivers/ide/palm_bk3710.c buildfix CC drivers/ide/palm_bk3710.o drivers/ide/palm_bk3710.c: In function 'palm_bk3710_probe': drivers/ide/palm_bk3710.c:382: warning: assignment makes integer from pointer without a cast Someone should fix hw_regs_t to neither be a typedef, nor use "unsigned long" where it should use "void __iomem *". Signed-off-by: David Brownell Cc: Kevin Hilman Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index a7ac490..f38aac7 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - unsigned long base, rate; + void __iomem *base; + unsigned long rate; int i, rc; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; @@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit((void __iomem *)base); + palm_bk3710_chipinit(base); for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; - hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = (unsigned long) + (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); + hw.io_ports.ctl_addr = (unsigned long) + (base + IDE_PALM_ATA_PRI_CTL_OFFSET); hw.irq = irq->start; hw.dev = &pdev->dev; hw.chipset = ide_palm3710; -- cgit v0.10.2 From 22c733788bbd4b75c00279119a83da5cd74b987a Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Jan 2009 10:07:21 +0100 Subject: sound: virtuoso: enable UART on Xonar HDAV1.3 This hardware has a better chance of working correctly if we don't forget to enable it. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index e9e829e..a962166 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -908,6 +908,7 @@ static const struct oxygen_model model_xonar_hdav = { .dac_channels = 8, .dac_volume_min = 0x0f, .dac_volume_max = 0xff, + .misc_flags = OXYGEN_MISC_MIDI, .function_flags = OXYGEN_FUNCTION_2WIRE, .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, -- cgit v0.10.2 From 45bf81011312958777f33088ac0911f241ada297 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Jan 2009 10:07:58 +0100 Subject: sound: virtuoso: add newline Add a missing newline. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index a962166..18c7c91 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -683,7 +683,7 @@ static void xonar_hdav_uart_input(struct oxygen *chip) if (chip->uart_input_count >= 2 && chip->uart_input[chip->uart_input_count - 2] == 'O' && chip->uart_input[chip->uart_input_count - 1] == 'K') { - printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:"); + printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n"); print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, chip->uart_input, chip->uart_input_count); chip->uart_input_count = 0; -- cgit v0.10.2 From 3288a66243c8d34c299dd6b8a336a34321ccff52 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Jan 2009 10:08:38 +0100 Subject: sound: virtuoso: document HDAV1.3 driver status Mention in the Kconfig help text that the HDAV1.3 code is rather experimental. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 6e3a184..82b9bdd 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -744,8 +744,8 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and - HDAV1.3 (Deluxe). + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. + Support for the HDAV1.3 (Deluxe) is very experimental. To compile this driver as a module, choose M here: the module will be called snd-virtuoso. -- cgit v0.10.2 From c2fdd36b550659f5ac2240d1f5a83ffa1a092289 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 17 Jan 2009 16:23:55 +0100 Subject: PCI hotplug: fix lock imbalance in pciehp set_lock_status omits mutex_unlock in fail path. Add the omitted unlock. As a result a lockup caused by this can be triggered from userspace by writing 1 to /sys/bus/pci/slots/.../lock often enough. Signed-off-by: Jiri Slaby Reviewed-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5482d4e..c248554 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -126,8 +126,10 @@ static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status) mutex_lock(&slot->ctrl->crit_sect); /* has it been >1 sec since our last toggle? */ - if ((get_seconds() - slot->last_emi_toggle) < 1) + if ((get_seconds() - slot->last_emi_toggle) < 1) { + mutex_unlock(&slot->ctrl->crit_sect); return -EINVAL; + } /* see what our current state is */ retval = get_lock_status(hotplug_slot, &value); -- cgit v0.10.2 From b7c18c1b2636ecb9ad76759f99dac6efd441fa92 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 18 Jan 2009 22:42:15 -0800 Subject: sparc64: Initialize FHC/CLOCK LED platform_device 'id' field correctly. There is only one clock board, so use -1 as the 'id' so we get just the base name as the LED device name string. There are multiple FHC boards potentially in a system so use the board number as the 'id' value for that case. Reported-by: Meelis Roos Tested-by: Meelis Roos Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index 05f1c91..f3b5466 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -103,6 +103,7 @@ static int __devinit clock_board_probe(struct of_device *op, p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-clockboard-leds"; + p->leds_pdev.id = -1; p->leds_pdev.resource = &p->leds_resource; p->leds_pdev.num_resources = 1; p->leds_pdev.dev.parent = &op->dev; @@ -197,6 +198,7 @@ static int __devinit fhc_probe(struct of_device *op, p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-fhc-leds"; + p->leds_pdev.id = p->board_num; p->leds_pdev.resource = &p->leds_resource; p->leds_pdev.num_resources = 1; p->leds_pdev.dev.parent = &op->dev; -- cgit v0.10.2 From 31ad9081200c06ccc350625d41d1f8b2d1cef29f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 16 Jan 2009 15:31:15 -0800 Subject: work_on_cpu: don't try to get_online_cpus() in work_on_cpu. Impact: remove potential circular lock dependency with cpu hotplug lock This has caused more problems than it solved, with a pile of cpu hotplug locking issues. Followup patches will get_online_cpus() in callers that need it, but if they don't do it they're no worse than before when they were using set_cpus_allowed without locking. Signed-off-by: Rusty Russell Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 2f44583..a35afdb 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -991,8 +991,8 @@ static void do_work_for_cpu(struct work_struct *w) * @fn: the function to run * @arg: the function arg * - * This will return -EINVAL in the cpu is not online, or the return value - * of @fn otherwise. + * This will return the value @fn returns. + * It is up to the caller to ensure that the cpu doesn't go offline. */ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) { @@ -1001,14 +1001,8 @@ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) INIT_WORK(&wfc.work, do_work_for_cpu); wfc.fn = fn; wfc.arg = arg; - get_online_cpus(); - if (unlikely(!cpu_online(cpu))) - wfc.ret = -EINVAL; - else { - schedule_work_on(cpu, &wfc.work); - flush_work(&wfc.work); - } - put_online_cpus(); + schedule_work_on(cpu, &wfc.work); + flush_work(&wfc.work); return wfc.ret; } -- cgit v0.10.2 From 8ccad40df8d314f786fdb06bdbedd4f43f3257cd Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 16 Jan 2009 15:31:15 -0800 Subject: work_on_cpu: Use our own workqueue. Impact: remove potential clashes with generic kevent workqueue Annoyingly, some places we want to use work_on_cpu are already in workqueues. As per Ingo's suggestion, we create a different workqueue for work_on_cpu. Signed-off-by: Rusty Russell Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar diff --git a/kernel/workqueue.c b/kernel/workqueue.c index a35afdb..1f0c509 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -971,6 +971,8 @@ undo: } #ifdef CONFIG_SMP +static struct workqueue_struct *work_on_cpu_wq __read_mostly; + struct work_for_cpu { struct work_struct work; long (*fn)(void *); @@ -1001,7 +1003,7 @@ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) INIT_WORK(&wfc.work, do_work_for_cpu); wfc.fn = fn; wfc.arg = arg; - schedule_work_on(cpu, &wfc.work); + queue_work_on(cpu, work_on_cpu_wq, &wfc.work); flush_work(&wfc.work); return wfc.ret; @@ -1019,4 +1021,8 @@ void __init init_workqueues(void) hotcpu_notifier(workqueue_cpu_callback, 0); keventd_wq = create_workqueue("events"); BUG_ON(!keventd_wq); +#ifdef CONFIG_SMP + work_on_cpu_wq = create_workqueue("work_on_cpu"); + BUG_ON(!work_on_cpu_wq); +#endif } -- cgit v0.10.2 From 72859081851af2bda04117ca3d64206ffa199e5e Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 16 Jan 2009 15:31:15 -0800 Subject: cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write Impact: use new work_on_cpu function to reduce stack usage Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with a work_on_cpu function for drv_read() and drv_write(). Basically converts do_drv_{read,write} into "work_on_cpu" functions that are now called by drv_read and drv_write. Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now that the work_on_cpu() function is more stable. Signed-off-by: Mike Travis Acked-by: Rusty Russell Tested-by: Dieter Ries Tested-by: Maciej Rutecki Cc: Dave Jones Cc: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 8f3c95c..5bf2c83 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -150,8 +150,9 @@ struct drv_cmd { u32 val; }; -static void do_drv_read(struct drv_cmd *cmd) +static long do_drv_read(void *_cmd) { + struct drv_cmd *cmd = _cmd; u32 h; switch (cmd->type) { @@ -166,10 +167,12 @@ static void do_drv_read(struct drv_cmd *cmd) default: break; } + return 0; } -static void do_drv_write(struct drv_cmd *cmd) +static long do_drv_write(void *_cmd) { + struct drv_cmd *cmd = _cmd; u32 lo, hi; switch (cmd->type) { @@ -186,30 +189,23 @@ static void do_drv_write(struct drv_cmd *cmd) default: break; } + return 0; } static void drv_read(struct drv_cmd *cmd) { - cpumask_t saved_mask = current->cpus_allowed; cmd->val = 0; - set_cpus_allowed_ptr(current, cmd->mask); - do_drv_read(cmd); - set_cpus_allowed_ptr(current, &saved_mask); + work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd); } static void drv_write(struct drv_cmd *cmd) { - cpumask_t saved_mask = current->cpus_allowed; unsigned int i; for_each_cpu(i, cmd->mask) { - set_cpus_allowed_ptr(current, cpumask_of(i)); - do_drv_write(cmd); + work_on_cpu(i, do_drv_write, cmd); } - - set_cpus_allowed_ptr(current, &saved_mask); - return; } static u32 get_cur_val(const struct cpumask *mask) @@ -366,7 +362,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) return freq; } -static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq, +static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, struct acpi_cpufreq_data *data) { unsigned int cur_freq; -- cgit v0.10.2 From 83436a0560e9ef8af2f0796264dde4bed1415359 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Jan 2009 14:39:10 -0700 Subject: dmaengine: kill some dubious WARN_ONCEs dma_find_channel and dma_issue_pending_all are good places to warn about improper api usage. However, warning correctly means synchronizing with dma_list_mutex, i.e. too much overhead for these fast-path calls. Reported-by: Ingo Molnar Signed-off-by: Dan Williams diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 6df144a..a589930 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -329,9 +329,6 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) struct dma_chan *chan; int cpu; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - cpu = get_cpu(); chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan; put_cpu(); @@ -348,9 +345,6 @@ void dma_issue_pending_all(void) struct dma_device *device; struct dma_chan *chan; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - rcu_read_lock(); list_for_each_entry_rcu(device, &dma_device_list, global_node) { if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) -- cgit v0.10.2 From c50331e8be32eaba5e1949f98c70d50b891262db Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Jan 2009 15:33:14 -0700 Subject: dmaengine: dma_issue_pending_all == nop when CONFIG_DMA_ENGINE=n The device list will always be empty in this configuration, so no need to walk the list. Reported-by: Ingo Molnar Signed-off-by: Dan Williams diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 64dea2a..c4a560e 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -390,11 +390,16 @@ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie, enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); #ifdef CONFIG_DMA_ENGINE enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); +void dma_issue_pending_all(void); #else static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) { return DMA_SUCCESS; } +static inline void dma_issue_pending_all(void) +{ + do { } while (0); +} #endif /* --- DMA device --- */ @@ -403,7 +408,6 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); -void dma_issue_pending_all(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); void dma_release_channel(struct dma_chan *chan); -- cgit v0.10.2 From ef560682a97491f62ef538931a4861b57d66c52c Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 19 Jan 2009 15:36:21 -0700 Subject: dmaengine: add async_tx_clear_ack() macro To complete the DMA_CTRL_ACK handling API add a async_tx_clear_ack() macro. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c4a560e..34f124d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -287,6 +287,11 @@ static inline void async_tx_ack(struct dma_async_tx_descriptor *tx) tx->flags |= DMA_CTRL_ACK; } +static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx) +{ + tx->flags &= ~DMA_CTRL_ACK; +} + static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx) { return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK; -- cgit v0.10.2 From 5296b56d1b2000b60fb966be161c1f8fb629786b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 19 Jan 2009 15:36:21 -0700 Subject: i.MX31: Image Processing Unit DMA and IRQ drivers i.MX3x SoCs contain an Image Processing Unit, consisting of a Control Module (CM), Display Interface (DI), Synchronous Display Controller (SDC), Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter (PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC). CM contains, among other blocks, an Interrupt Generator (IG) and a Clock and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are supported over dmaengine and irq-chip APIs respectively. IDMAC is a specialised DMA controller, its DMA channels cannot be used for general-purpose operations, even though it might be possible to configure a memory-to-memory channel for memcpy operation. This driver will not work with generic dmaengine clients, clients, wishing to use it must use respective wrapper structures, they also must specify which channels they require, as channels are hard-wired to specific IPU functions. Acked-by: Sascha Hauer Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h new file mode 100644 index 0000000..a9221f1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ipu.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_H_ +#define _IPU_H_ + +#include +#include + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +struct ipu_platform_data { + unsigned int irq_base; +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index e06d3cb..c02b8fc 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -35,7 +35,15 @@ #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) #define MXC_BOARD_IRQS 16 -#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) +#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) + +#ifdef CONFIG_MX3_IPU_IRQS +#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS +#else +#define MX3_IPU_IRQS 0 +#endif + +#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index e34b064..48ea59e 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -62,6 +62,25 @@ config MV_XOR ---help--- Enable support for the Marvell XOR engine. +config MX3_IPU + bool "MX3x Image Processing Unit support" + depends on ARCH_MX3 + select DMA_ENGINE + default y + help + If you plan to use the Image Processing unit in the i.MX3x, say + Y here. If unsure, select Y. + +config MX3_IPU_IRQS + int "Number of dynamically mapped interrupts for IPU" + depends on MX3_IPU + range 2 137 + default 4 + help + Out of 137 interrupt sources on i.MX31 IPU only very few are used. + To avoid bloating the irq_desc[] array we allocate a sufficient + number of IRQ slots and map them dynamically to specific sources. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 14f5952..2e5dc96 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o +obj-$(CONFIG_MX3_IPU) += ipu/ diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile new file mode 100644 index 0000000..6704cf4 --- /dev/null +++ b/drivers/dma/ipu/Makefile @@ -0,0 +1 @@ +obj-y += ipu_irq.o ipu_idmac.o diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c new file mode 100644 index 0000000..1f154d0 --- /dev/null +++ b/drivers/dma/ipu/ipu_idmac.c @@ -0,0 +1,1740 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ipu_intern.h" + +#define FS_VF_IN_VALID 0x00000002 +#define FS_ENC_IN_VALID 0x00000001 + +/* + * There can be only one, we could allocate it dynamically, but then we'd have + * to add an extra parameter to some functions, and use something as ugly as + * struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device)); + * in the ISR + */ +static struct ipu ipu_data; + +#define to_ipu(id) container_of(id, struct ipu, idmac) + +static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ic + reg); +} + +#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF) + +static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ic + reg); +} + +#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF) + +static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + +/***************************************************************************** + * IPU / IC common functions + */ +static void dump_idmac_reg(struct ipu *ipu) +{ + dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, " + "IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n", + idmac_read_icreg(ipu, IDMAC_CONF), + idmac_read_icreg(ipu, IC_CONF), + idmac_read_icreg(ipu, IDMAC_CHA_EN), + idmac_read_icreg(ipu, IDMAC_CHA_PRI), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY)); + dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, " + "DB_MODE 0x%x, TASKS_STAT 0x%x\n", + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF), + idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); +} + +static uint32_t bytes_per_pixel(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: /* generic data */ + case IPU_PIX_FMT_RGB332: + case IPU_PIX_FMT_YUV420P: + case IPU_PIX_FMT_YUV422P: + default: + return 1; + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_YUYV: + case IPU_PIX_FMT_UYVY: + return 2; + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + return 3; + case IPU_PIX_FMT_GENERIC_32: /* generic data */ + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_ABGR32: + return 4; + } +} + +/* Enable / disable direct write to memory by the Camera Sensor Interface */ +static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t stat = TASK_STAT_IDLE; + uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT); + + switch (channel) { + case IDMAC_IC_7: + stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >> + TSTAT_CSI2MEM_OFFSET; + break; + case IDMAC_IC_0: + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + return stat; +} + +struct chan_param_mem_planar { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 res1:2; + u32 nsb:1; + u32 lnpb:6; + u32 ubo_l:11; + + u32 ubo_h:15; + u32 vbo_l:17; + + u32 vbo_h:9; + u32 res2:3; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 res6:30; +} __attribute__ ((packed)); + +struct chan_param_mem_interleaved { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 sce:1; + u32 res1:1; + u32 nsb:1; + u32 lnpb:6; + u32 sx:10; + u32 sy_l:1; + + u32 sy_h:9; + u32 ns:10; + u32 sm:10; + u32 sdx_l:3; + + u32 sdx_h:2; + u32 sdy:5; + u32 sdrx:1; + u32 sdry:1; + u32 sdr1:1; + u32 res2:2; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 scc:1; + u32 ofs0:5; + u32 ofs1:5; + u32 ofs2:5; + u32 ofs3:5; + u32 wid0:3; + u32 wid1:3; + u32 wid2:3; + + u32 wid3:3; + u32 dec_sel:1; + u32 res6:28; +} __attribute__ ((packed)); + +union chan_param_mem { + struct chan_param_mem_planar pp; + struct chan_param_mem_interleaved ip; +}; + +static void ipu_ch_param_set_plane_offset(union chan_param_mem *params, + u32 u_offset, u32 v_offset) +{ + params->pp.ubo_l = u_offset & 0x7ff; + params->pp.ubo_h = u_offset >> 11; + params->pp.vbo_l = v_offset & 0x1ffff; + params->pp.vbo_h = v_offset >> 17; +} + +static void ipu_ch_param_set_size(union chan_param_mem *params, + uint32_t pixel_fmt, uint16_t width, + uint16_t height, uint16_t stride) +{ + u32 u_offset; + u32 v_offset; + + params->pp.fw = width - 1; + params->pp.fh_l = height - 1; + params->pp.fh_h = (height - 1) >> 8; + params->pp.sl = stride - 1; + + switch (pixel_fmt) { + case IPU_PIX_FMT_GENERIC: + /*Represents 8-bit Generic data */ + params->pp.bpp = 3; + params->pp.pfs = 7; + params->pp.npb = 31; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_GENERIC_32: + /*Represents 32-bit Generic data */ + params->pp.bpp = 0; + params->pp.pfs = 7; + params->pp.npb = 7; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_RGB565: + params->ip.bpp = 2; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 5; /* Green bit offset */ + params->ip.ofs2 = 11; /* Blue bit offset */ + params->ip.ofs3 = 16; /* Alpha bit offset */ + params->ip.wid0 = 4; /* Red bit width - 1 */ + params->ip.wid1 = 5; /* Green bit width - 1 */ + params->ip.wid2 = 4; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGR24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 16; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_RGB24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 16; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 0; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_BGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_RGB32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 24; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 8; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_ABGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_UYVY: + params->ip.bpp = 2; + params->ip.pfs = 6; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + break; + case IPU_PIX_FMT_YUV420P2: + case IPU_PIX_FMT_YUV420P: + params->ip.bpp = 3; + params->ip.pfs = 3; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 4; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YVU422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + v_offset = stride * height; + u_offset = v_offset + v_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YUV422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + default: + dev_err(ipu_data.dev, + "mxc ipu: unimplemented pixel format %d\n", pixel_fmt); + break; + } + + params->pp.nsb = 1; +} + +static void ipu_ch_param_set_burst_size(union chan_param_mem *params, + uint16_t burst_pixels) +{ + params->pp.npb = burst_pixels - 1; +}; + +static void ipu_ch_param_set_buffer(union chan_param_mem *params, + dma_addr_t buf0, dma_addr_t buf1) +{ + params->pp.eba0 = buf0; + params->pp.eba1 = buf1; +}; + +static void ipu_ch_param_set_rotation(union chan_param_mem *params, + enum ipu_rotate_mode rotate) +{ + params->pp.bam = rotate; +}; + +static void ipu_write_param_mem(uint32_t addr, uint32_t *data, + uint32_t num_words) +{ + for (; num_words > 0; num_words--) { + dev_dbg(ipu_data.dev, + "write param mem - addr = 0x%08X, data = 0x%08X\n", + addr, *data); + idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA); + addr++; + if ((addr & 0x7) == 5) { + addr &= ~0x7; /* set to word 0 */ + addr += 8; /* increment to next row */ + } + } +} + +static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size, + uint32_t *resize_coeff, + uint32_t *downsize_coeff) +{ + uint32_t temp_size; + uint32_t temp_downsize; + + *resize_coeff = 1 << 13; + *downsize_coeff = 1 << 13; + + /* Cannot downsize more than 8:1 */ + if (out_size << 3 < in_size) + return -EINVAL; + + /* compute downsizing coefficient */ + temp_downsize = 0; + temp_size = in_size; + while (temp_size >= out_size * 2 && temp_downsize < 2) { + temp_size >>= 1; + temp_downsize++; + } + *downsize_coeff = temp_downsize; + + /* + * compute resizing coefficient using the following formula: + * resize_coeff = M*(SI -1)/(SO - 1) + * where M = 2^13, SI - input size, SO - output size + */ + *resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1); + if (*resize_coeff >= 16384L) { + dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n"); + *resize_coeff = 0x3FFF; + } + + dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, " + "downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size, + *downsize_coeff, *resize_coeff >= 8192L ? 1 : 0, + ((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff); + + return 0; +} + +static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + return IPU_COLORSPACE_RGB; + default: + return IPU_COLORSPACE_YCBCR; + } +} + +static int ipu_ic_init_prpenc(struct ipu *ipu, + union ipu_channel_param *params, bool src_is_csi) +{ + uint32_t reg, ic_conf; + uint32_t downsize_coeff, resize_coeff; + enum ipu_color_space in_fmt, out_fmt; + + /* Setup vertical resizing */ + calc_resize_coeffs(params->video.in_height, + params->video.out_height, + &resize_coeff, &downsize_coeff); + reg = (downsize_coeff << 30) | (resize_coeff << 16); + + /* Setup horizontal resizing */ + calc_resize_coeffs(params->video.in_width, + params->video.out_width, + &resize_coeff, &downsize_coeff); + reg |= (downsize_coeff << 14) | resize_coeff; + + /* Setup color space conversion */ + in_fmt = format_to_colorspace(params->video.in_pixel_fmt); + out_fmt = format_to_colorspace(params->video.out_pixel_fmt); + + /* + * Colourspace conversion unsupported yet - see _init_csc() in + * Freescale sources + */ + if (in_fmt != out_fmt) { + dev_err(ipu->dev, "Colourspace conversion unsupported!\n"); + return -EOPNOTSUPP; + } + + idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC); + + ic_conf = idmac_read_icreg(ipu, IC_CONF); + + if (src_is_csi) + ic_conf &= ~IC_CONF_RWS_EN; + else + ic_conf |= IC_CONF_RWS_EN; + + idmac_write_icreg(ipu, ic_conf, IC_CONF); + + return 0; +} + +static uint32_t dma_param_addr(uint32_t dma_ch) +{ + /* Channel Parameter Memory */ + return 0x10000 | (dma_ch << 4); +}; + +static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel, + bool prio) +{ + u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI); + + if (prio) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI); + + dump_idmac_reg(ipu); +} + +static uint32_t ipu_channel_conf_mask(enum ipu_channel channel) +{ + uint32_t mask; + + switch (channel) { + case IDMAC_IC_0: + case IDMAC_IC_7: + mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN; + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN; + break; + default: + mask = 0; + break; + } + + return mask; +} + +/** + * ipu_enable_channel() - enable an IPU channel. + * @channel: channel ID. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + struct ipu *ipu = to_ipu(idmac); + enum ipu_channel channel = ichan->dma_chan.chan_id; + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu->lock, flags); + + /* Reset to buffer 0 */ + idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF); + ichan->active_buffer = 0; + ichan->status = IPU_CHANNEL_ENABLED; + + switch (channel) { + case IDMAC_SDC_0: + case IDMAC_SDC_1: + case IDMAC_IC_7: + ipu_channel_set_priority(ipu, channel, true); + default: + break; + } + + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + + idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN); + + ipu_ic_enable_task(ipu, channel); + + spin_unlock_irqrestore(&ipu->lock, flags); + return 0; +} + +/** + * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel. + * @channel: channel ID. + * @pixel_fmt: pixel format of buffer. Pixel format is a FOURCC ASCII code. + * @width: width of buffer in pixels. + * @height: height of buffer in pixels. + * @stride: stride length of buffer in pixels. + * @rot_mode: rotation mode of buffer. A rotation setting other than + * IPU_ROTATE_VERT_FLIP should only be used for input buffers of + * rotation channels. + * @phyaddr_0: buffer 0 physical address. + * @phyaddr_1: buffer 1 physical address. Setting this to a value other than + * NULL enables double buffering mode. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_init_channel_buffer(struct idmac_channel *ichan, + enum pixel_fmt pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + enum ipu_rotate_mode rot_mode, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + struct ipu *ipu = to_ipu(idmac); + union chan_param_mem params = {}; + unsigned long flags; + uint32_t reg; + uint32_t stride_bytes; + + stride_bytes = stride * bytes_per_pixel(pixel_fmt); + + if (stride_bytes % 4) { + dev_err(ipu->dev, + "Stride length must be 32-bit aligned, stride = %d, bytes = %d\n", + stride, stride_bytes); + return -EINVAL; + } + + /* IC channel's stride must be a multiple of 8 pixels */ + if ((channel <= 13) && (stride % 8)) { + dev_err(ipu->dev, "Stride must be 8 pixel multiple\n"); + return -EINVAL; + } + + /* Build parameter memory data for DMA channel */ + ipu_ch_param_set_size(¶ms, pixel_fmt, width, height, stride_bytes); + ipu_ch_param_set_buffer(¶ms, phyaddr_0, phyaddr_1); + ipu_ch_param_set_rotation(¶ms, rot_mode); + /* Some channels (rotation) have restriction on burst length */ + switch (channel) { + case IDMAC_IC_7: /* Hangs with burst 8, 16, other values + invalid - Table 44-30 */ +/* + ipu_ch_param_set_burst_size(¶ms, 8); + */ + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + /* In original code only IPU_PIX_FMT_RGB565 was setting burst */ + ipu_ch_param_set_burst_size(¶ms, 16); + break; + case IDMAC_IC_0: + default: + break; + } + + spin_lock_irqsave(&ipu->lock, flags); + + ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10); + + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + + if (phyaddr_1) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL); + + ichan->status = IPU_CHANNEL_READY; + + spin_unlock_irqrestore(ipu->lock, flags); + + return 0; +} + +/** + * ipu_select_buffer() - mark a channel's buffer as ready. + * @channel: channel ID. + * @buffer_n: buffer number to mark ready. + */ +static void ipu_select_buffer(enum ipu_channel channel, int buffer_n) +{ + /* No locking - this is a write-one-to-set register, cleared by IPU */ + if (buffer_n == 0) + /* Mark buffer 0 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY); + else + /* Mark buffer 1 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY); +} + +/** + * ipu_update_channel_buffer() - update physical address of a channel buffer. + * @channel: channel ID. + * @buffer_n: buffer number to update. + * 0 or 1 are the only valid values. + * @phyaddr: buffer physical address. + * @return: Returns 0 on success or negative error code on failure. This + * function will fail if the buffer is set to ready. + */ +/* Called under spin_lock(_irqsave)(&ichan->lock) */ +static int ipu_update_channel_buffer(enum ipu_channel channel, + int buffer_n, dma_addr_t phyaddr) +{ + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu_data.lock, flags); + + if (buffer_n == 0) { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0008UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } else { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* Check if double-buffering is already enabled */ + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL); + + if (!(reg & (1UL << channel))) + idmac_write_ipureg(&ipu_data, reg | (1UL << channel), + IPU_CHA_DB_MODE_SEL); + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0009UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } + + spin_unlock_irqrestore(&ipu_data.lock, flags); + + return 0; +} + +/* Called under spin_lock_irqsave(&ichan->lock) */ +static int ipu_submit_channel_buffers(struct idmac_channel *ichan, + struct idmac_tx_desc *desc) +{ + struct scatterlist *sg; + int i, ret = 0; + + for (i = 0, sg = desc->sg; i < 2 && sg; i++) { + if (!ichan->sg[i]) { + ichan->sg[i] = sg; + + /* + * On first invocation this shouldn't be necessary, the + * call to ipu_init_channel_buffer() above will set + * addresses for us, so we could make it conditional + * on status >= IPU_CHANNEL_ENABLED, but doing it again + * shouldn't hurt either. + */ + ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i, + sg_dma_address(sg)); + if (ret < 0) + return ret; + + ipu_select_buffer(ichan->dma_chan.chan_id, i); + + sg = sg_next(sg); + } + } + + return ret; +} + +static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct idmac_tx_desc *desc = to_tx_desc(tx); + struct idmac_channel *ichan = to_idmac_chan(tx->chan); + struct idmac *idmac = to_idmac(tx->chan->device); + struct ipu *ipu = to_ipu(idmac); + dma_cookie_t cookie; + unsigned long flags; + + /* Sanity check */ + if (!list_empty(&desc->list)) { + /* The descriptor doesn't belong to client */ + dev_err(&ichan->dma_chan.dev->device, + "Descriptor %p not prepared!\n", tx); + return -EBUSY; + } + + mutex_lock(&ichan->chan_mutex); + + if (ichan->status < IPU_CHANNEL_READY) { + struct idmac_video_param *video = &ichan->params.video; + /* + * Initial buffer assignment - the first two sg-entries from + * the descriptor will end up in the IDMAC buffers + */ + dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 : + sg_dma_address(&desc->sg[1]); + + WARN_ON(ichan->sg[0] || ichan->sg[1]); + + cookie = ipu_init_channel_buffer(ichan, + video->out_pixel_fmt, + video->out_width, + video->out_height, + video->out_stride, + IPU_ROTATE_NONE, + sg_dma_address(&desc->sg[0]), + dma_1); + if (cookie < 0) + goto out; + } + + /* ipu->lock can be taken under ichan->lock, but not v.v. */ + spin_lock_irqsave(&ichan->lock, flags); + + /* submit_buffers() atomically verifies and fills empty sg slots */ + cookie = ipu_submit_channel_buffers(ichan, desc); + + spin_unlock_irqrestore(&ichan->lock, flags); + + if (cookie < 0) + goto out; + + cookie = ichan->dma_chan.cookie; + + if (++cookie < 0) + cookie = 1; + + /* from dmaengine.h: "last cookie value returned to client" */ + ichan->dma_chan.cookie = cookie; + tx->cookie = cookie; + spin_lock_irqsave(&ichan->lock, flags); + list_add_tail(&desc->list, &ichan->queue); + spin_unlock_irqrestore(&ichan->lock, flags); + + if (ichan->status < IPU_CHANNEL_ENABLED) { + int ret = ipu_enable_channel(idmac, ichan); + if (ret < 0) { + cookie = ret; + spin_lock_irqsave(&ichan->lock, flags); + list_del_init(&desc->list); + spin_unlock_irqrestore(&ichan->lock, flags); + tx->cookie = cookie; + ichan->dma_chan.cookie = cookie; + } + } + + dump_idmac_reg(ipu); + +out: + mutex_unlock(&ichan->chan_mutex); + + return cookie; +} + +/* Called with ichan->chan_mutex held */ +static int idmac_desc_alloc(struct idmac_channel *ichan, int n) +{ + struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc)); + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + + if (!desc) + return -ENOMEM; + + /* No interrupts, just disable the tasklet for a moment */ + tasklet_disable(&to_ipu(idmac)->tasklet); + + ichan->n_tx_desc = n; + ichan->desc = desc; + INIT_LIST_HEAD(&ichan->queue); + INIT_LIST_HEAD(&ichan->free_list); + + while (n--) { + struct dma_async_tx_descriptor *txd = &desc->txd; + + memset(txd, 0, sizeof(*txd)); + dma_async_tx_descriptor_init(txd, &ichan->dma_chan); + txd->tx_submit = idmac_tx_submit; + txd->chan = &ichan->dma_chan; + INIT_LIST_HEAD(&txd->tx_list); + + list_add(&desc->list, &ichan->free_list); + + desc++; + } + + tasklet_enable(&to_ipu(idmac)->tasklet); + + return 0; +} + +/** + * ipu_init_channel() - initialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + * @return 0 on success or negative error code on failure. + */ +static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + union ipu_channel_param *params = &ichan->params; + uint32_t ipu_conf; + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + struct ipu *ipu = to_ipu(idmac); + int ret = 0, n_desc = 0; + + dev_dbg(ipu->dev, "init channel = %d\n", channel); + + if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 && + channel != IDMAC_IC_7) + return -EINVAL; + + spin_lock_irqsave(&ipu->lock, flags); + + switch (channel) { + case IDMAC_IC_7: + n_desc = 16; + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF); + break; + case IDMAC_IC_0: + n_desc = 16; + reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW); + idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW); + ret = ipu_ic_init_prpenc(ipu, params, true); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + n_desc = 4; + default: + break; + } + + ipu->channel_init_mask |= 1L << channel; + + /* Enable IPU sub module */ + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) | + ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + if (n_desc && !ichan->desc) + ret = idmac_desc_alloc(ichan, n_desc); + + dump_idmac_reg(ipu); + + return ret; +} + +/** + * ipu_uninit_channel() - uninitialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + */ +static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + unsigned long chan_mask = 1UL << channel; + uint32_t ipu_conf; + struct ipu *ipu = to_ipu(idmac); + + spin_lock_irqsave(&ipu->lock, flags); + + if (!(ipu->channel_init_mask & chan_mask)) { + dev_err(ipu->dev, "Channel already uninitialized %d\n", + channel); + spin_unlock_irqrestore(&ipu->lock, flags); + return; + } + + /* Reset the double buffer */ + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL); + + ichan->sec_chan_en = false; + + switch (channel) { + case IDMAC_IC_7: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN), + IC_CONF); + break; + case IDMAC_IC_0: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1), + IC_CONF); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + + ipu->channel_init_mask &= ~(1L << channel); + + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) & + ~ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + ichan->n_tx_desc = 0; + vfree(ichan->desc); + ichan->desc = NULL; +} + +/** + * ipu_disable_channel() - disable an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: channel object pointer. + * @wait_for_stop: flag to set whether to wait for channel end of frame or + * return immediately. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan, + bool wait_for_stop) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct ipu *ipu = to_ipu(idmac); + uint32_t reg; + unsigned long flags; + unsigned long chan_mask = 1UL << channel; + unsigned int timeout; + + if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) { + timeout = 40; + /* This waiting always fails. Related to spurious irq problem */ + while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) || + (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) { + timeout--; + msleep(10); + + if (!timeout) { + dev_dbg(ipu->dev, + "Warning: timeout waiting for channel %u to " + "stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, " + "busy = 0x%08X, tstat = 0x%08X\n", channel, + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); + break; + } + } + dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout); + } + /* SDC BG and FG must be disabled before DMA is disabled */ + if (wait_for_stop && (channel == IDMAC_SDC_0 || + channel == IDMAC_SDC_1)) { + for (timeout = 5; + timeout && !ipu_irq_status(ichan->eof_irq); timeout--) + msleep(5); + } + + spin_lock_irqsave(&ipu->lock, flags); + + /* Disable IC task */ + ipu_ic_disable_task(ipu, channel); + + /* Disable DMA channel(s) */ + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN); + + /* + * Problem (observed with channel DMAIC_7): after enabling the channel + * and initialising buffers, there comes an interrupt with current still + * pointing at buffer 0, whereas it should use buffer 0 first and only + * generate an interrupt when it is done, then current should already + * point to buffer 1. This spurious interrupt also comes on channel + * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the + * first interrupt, there comes the second with current correctly + * pointing to buffer 1 this time. But sometimes this second interrupt + * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling + * the channel seems to prevent the channel from hanging, but it doesn't + * prevent the spurious interrupt. This might also be unsafe. Think + * about the IDMAC controller trying to switch to a buffer, when we + * clear the ready bit, and re-enable it a moment later. + */ + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY); + + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY); + + spin_unlock_irqrestore(&ipu->lock, flags); + + return 0; +} + +/* + * We have several possibilities here: + * current BUF next BUF + * + * not last sg next not last sg + * not last sg next last sg + * last sg first sg from next descriptor + * last sg NULL + * + * Besides, the descriptor queue might be empty or not. We process all these + * cases carefully. + */ +static irqreturn_t idmac_interrupt(int irq, void *dev_id) +{ + struct idmac_channel *ichan = dev_id; + unsigned int chan_id = ichan->dma_chan.chan_id; + struct scatterlist **sg, *sgnext, *sgnew = NULL; + /* Next transfer descriptor */ + struct idmac_tx_desc *desc = NULL, *descnew; + dma_async_tx_callback callback; + void *callback_param; + bool done = false; + u32 ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY), + ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY), + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + + /* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */ + + pr_debug("IDMAC irq %d\n", irq); + /* Other interrupts do not interfere with this channel */ + spin_lock(&ichan->lock); + + if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && + ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + int i = 100; + + /* This doesn't help. See comment in ipu_disable_channel() */ + while (--i) { + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + if (((curbuf >> chan_id) & 1) != ichan->active_buffer) + break; + cpu_relax(); + } + + if (!i) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ on active buffer on channel %x, active " + "%d, ready %x, %x, current %x!\n", chan_id, + ichan->active_buffer, ready0, ready1, curbuf); + return IRQ_NONE; + } + } + + if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) || + (!ichan->active_buffer && (ready0 >> chan_id) & 1) + )) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ with active buffer still ready on channel %x, " + "active %d, ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + if (unlikely(list_empty(&ichan->queue))) { + spin_unlock(&ichan->lock); + dev_err(ichan->dma_chan.device->dev, + "IRQ without queued buffers on channel %x, active %d, " + "ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + /* + * active_buffer is a software flag, it shows which buffer we are + * currently expecting back from the hardware, IDMAC should be + * processing the other buffer already + */ + sg = &ichan->sg[ichan->active_buffer]; + sgnext = ichan->sg[!ichan->active_buffer]; + + /* + * if sgnext == NULL sg must be the last element in a scatterlist and + * queue must be empty + */ + if (unlikely(!sgnext)) { + if (unlikely(sg_next(*sg))) { + dev_err(ichan->dma_chan.device->dev, + "Broken buffer-update locking on channel %x!\n", + chan_id); + /* We'll let the user catch up */ + } else { + /* Underrun */ + ipu_ic_disable_task(&ipu_data, chan_id); + dev_dbg(ichan->dma_chan.device->dev, + "Underrun on channel %x\n", chan_id); + ichan->status = IPU_CHANNEL_READY; + /* Continue to check for complete descriptor */ + } + } + + desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list); + + /* First calculate and submit the next sg element */ + if (likely(sgnext)) + sgnew = sg_next(sgnext); + + if (unlikely(!sgnew)) { + /* Start a new scatterlist, if any queued */ + if (likely(desc->list.next != &ichan->queue)) { + descnew = list_entry(desc->list.next, + struct idmac_tx_desc, list); + sgnew = &descnew->sg[0]; + } + } + + if (unlikely(!sg_next(*sg)) || !sgnext) { + /* + * Last element in scatterlist done, remove from the queue, + * _init for debugging + */ + list_del_init(&desc->list); + done = true; + } + + *sg = sgnew; + + if (likely(sgnew)) { + int ret; + + ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer, + sg_dma_address(*sg)); + if (ret < 0) + dev_err(ichan->dma_chan.device->dev, + "Failed to update buffer on channel %x buffer %d!\n", + chan_id, ichan->active_buffer); + else + ipu_select_buffer(chan_id, ichan->active_buffer); + } + + /* Flip the active buffer - even if update above failed */ + ichan->active_buffer = !ichan->active_buffer; + if (done) + ichan->completed = desc->txd.cookie; + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + spin_unlock(&ichan->lock); + + if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback) + callback(callback_param); + + return IRQ_HANDLED; +} + +static void ipu_gc_tasklet(unsigned long arg) +{ + struct ipu *ipu = (struct ipu *)arg; + int i; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct idmac_tx_desc *desc; + unsigned long flags; + int j; + + for (j = 0; j < ichan->n_tx_desc; j++) { + desc = ichan->desc + j; + spin_lock_irqsave(&ichan->lock, flags); + if (async_tx_test_ack(&desc->txd)) { + list_move(&desc->list, &ichan->free_list); + async_tx_clear_ack(&desc->txd); + } + spin_unlock_irqrestore(&ichan->lock, flags); + } + } +} + +/* + * At the time .device_alloc_chan_resources() method is called, we cannot know, + * whether the client will accept the channel. Thus we must only check, if we + * can satisfy client's request but the only real criterion to verify, whether + * the client has accepted our offer is the client_count. That's why we have to + * perform the rest of our allocation tasks on the first call to this function. + */ +static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan, + struct scatterlist *sgl, unsigned int sg_len, + enum dma_data_direction direction, unsigned long tx_flags) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac_tx_desc *desc = NULL; + struct dma_async_tx_descriptor *txd = NULL; + unsigned long flags; + + /* We only can handle these three channels so far */ + if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 && + ichan->dma_chan.chan_id != IDMAC_IC_7) + return NULL; + + if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) { + dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction); + return NULL; + } + + mutex_lock(&ichan->chan_mutex); + + spin_lock_irqsave(&ichan->lock, flags); + if (!list_empty(&ichan->free_list)) { + desc = list_entry(ichan->free_list.next, + struct idmac_tx_desc, list); + + list_del_init(&desc->list); + + desc->sg_len = sg_len; + desc->sg = sgl; + txd = &desc->txd; + txd->flags = tx_flags; + } + spin_unlock_irqrestore(&ichan->lock, flags); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet); + + return txd; +} + +/* Re-select the current buffer and re-activate the channel */ +static void idmac_issue_pending(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + struct ipu *ipu = to_ipu(idmac); + unsigned long flags; + + /* This is not always needed, but doesn't hurt either */ + spin_lock_irqsave(&ipu->lock, flags); + ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer); + spin_unlock_irqrestore(&ipu->lock, flags); + + /* + * Might need to perform some parts of initialisation from + * ipu_enable_channel(), but not all, we do not want to reset to buffer + * 0, don't need to set priority again either, but re-enabling the task + * and the channel might be a good idea. + */ +} + +static void __idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + unsigned long flags; + int i; + + ipu_disable_channel(idmac, ichan, + ichan->status >= IPU_CHANNEL_ENABLED); + + tasklet_disable(&to_ipu(idmac)->tasklet); + + /* ichan->queue is modified in ISR, have to spinlock */ + spin_lock_irqsave(&ichan->lock, flags); + list_splice_init(&ichan->queue, &ichan->free_list); + + if (ichan->desc) + for (i = 0; i < ichan->n_tx_desc; i++) { + struct idmac_tx_desc *desc = ichan->desc + i; + if (list_empty(&desc->list)) + /* Descriptor was prepared, but not submitted */ + list_add(&desc->list, + &ichan->free_list); + + async_tx_clear_ack(&desc->txd); + } + + ichan->sg[0] = NULL; + ichan->sg[1] = NULL; + spin_unlock_irqrestore(&ichan->lock, flags); + + tasklet_enable(&to_ipu(idmac)->tasklet); + + ichan->status = IPU_CHANNEL_INITIALIZED; +} + +static void idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + mutex_unlock(&ichan->chan_mutex); +} + +static int idmac_alloc_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + int ret; + + /* dmaengine.c now guarantees to only offer free channels */ + BUG_ON(chan->client_count > 1); + WARN_ON(ichan->status != IPU_CHANNEL_FREE); + + chan->cookie = 1; + ichan->completed = -ENXIO; + + ret = ipu_irq_map(ichan->dma_chan.chan_id); + if (ret < 0) + goto eimap; + + ichan->eof_irq = ret; + ret = request_irq(ichan->eof_irq, idmac_interrupt, 0, + ichan->eof_name, ichan); + if (ret < 0) + goto erirq; + + ret = ipu_init_channel(idmac, ichan); + if (ret < 0) + goto eichan; + + ichan->status = IPU_CHANNEL_INITIALIZED; + + dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n", + ichan->dma_chan.chan_id, ichan->eof_irq); + + return ret; + +eichan: + free_irq(ichan->eof_irq, ichan); +erirq: + ipu_irq_unmap(ichan->dma_chan.chan_id); +eimap: + return ret; +} + +static void idmac_free_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + if (ichan->status > IPU_CHANNEL_FREE) { + free_irq(ichan->eof_irq, ichan); + ipu_irq_unmap(ichan->dma_chan.chan_id); + } + + ichan->status = IPU_CHANNEL_FREE; + + ipu_uninit_channel(idmac, ichan); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(idmac)->tasklet); +} + +static enum dma_status idmac_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + if (done) + *done = ichan->completed; + if (used) + *used = chan->cookie; + if (cookie != chan->cookie) + return DMA_ERROR; + return DMA_SUCCESS; +} + +static int __init ipu_idmac_init(struct ipu *ipu) +{ + struct idmac *idmac = &ipu->idmac; + struct dma_device *dma = &idmac->dma; + int i; + + dma_cap_set(DMA_SLAVE, dma->cap_mask); + dma_cap_set(DMA_PRIVATE, dma->cap_mask); + + /* Compulsory common fields */ + dma->dev = ipu->dev; + dma->device_alloc_chan_resources = idmac_alloc_chan_resources; + dma->device_free_chan_resources = idmac_free_chan_resources; + dma->device_is_tx_complete = idmac_is_tx_complete; + dma->device_issue_pending = idmac_issue_pending; + + /* Compulsory for DMA_SLAVE fields */ + dma->device_prep_slave_sg = idmac_prep_slave_sg; + dma->device_terminate_all = idmac_terminate_all; + + INIT_LIST_HEAD(&dma->channels); + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct dma_chan *dma_chan = &ichan->dma_chan; + + spin_lock_init(&ichan->lock); + mutex_init(&ichan->chan_mutex); + + ichan->status = IPU_CHANNEL_FREE; + ichan->sec_chan_en = false; + ichan->completed = -ENXIO; + snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i); + + dma_chan->device = &idmac->dma; + dma_chan->cookie = 1; + dma_chan->chan_id = i; + list_add_tail(&ichan->dma_chan.device_node, &dma->channels); + } + + idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF); + + return dma_async_device_register(&idmac->dma); +} + +static void ipu_idmac_exit(struct ipu *ipu) +{ + int i; + struct idmac *idmac = &ipu->idmac; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + + idmac_terminate_all(&ichan->dma_chan); + idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0); + } + + dma_async_device_unregister(&idmac->dma); +} + +/***************************************************************************** + * IPU common probe / remove + */ + +static int ipu_probe(struct platform_device *pdev) +{ + struct ipu_platform_data *pdata = pdev->dev.platform_data; + struct resource *mem_ipu, *mem_ic; + int ret; + + spin_lock_init(&ipu_data.lock); + + mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!pdata || !mem_ipu || !mem_ic) + return -EINVAL; + + ipu_data.dev = &pdev->dev; + + platform_set_drvdata(pdev, &ipu_data); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_fn = ret; + ret = platform_get_irq(pdev, 1); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_err = ret; + ipu_data.irq_base = pdata->irq_base; + + dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n", + ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base); + + /* Remap IPU common registers */ + ipu_data.reg_ipu = ioremap(mem_ipu->start, + mem_ipu->end - mem_ipu->start + 1); + if (!ipu_data.reg_ipu) { + ret = -ENOMEM; + goto err_ioremap_ipu; + } + + /* Remap Image Converter and Image DMA Controller registers */ + ipu_data.reg_ic = ioremap(mem_ic->start, + mem_ic->end - mem_ic->start + 1); + if (!ipu_data.reg_ic) { + ret = -ENOMEM; + goto err_ioremap_ic; + } + + /* Get IPU clock */ + ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk"); + if (IS_ERR(ipu_data.ipu_clk)) { + ret = PTR_ERR(ipu_data.ipu_clk); + goto err_clk_get; + } + + /* Make sure IPU HSP clock is running */ + clk_enable(ipu_data.ipu_clk); + + /* Disable all interrupts */ + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5); + + dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name, + (unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err); + + ret = ipu_irq_attach_irq(&ipu_data, pdev); + if (ret < 0) + goto err_attach_irq; + + /* Initialize DMA engine */ + ret = ipu_idmac_init(&ipu_data); + if (ret < 0) + goto err_idmac_init; + + tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data); + + ipu_data.dev = &pdev->dev; + + dev_dbg(ipu_data.dev, "IPU initialized\n"); + + return 0; + +err_idmac_init: +err_attach_irq: + ipu_irq_detach_irq(&ipu_data, pdev); + clk_disable(ipu_data.ipu_clk); + clk_put(ipu_data.ipu_clk); +err_clk_get: + iounmap(ipu_data.reg_ic); +err_ioremap_ic: + iounmap(ipu_data.reg_ipu); +err_ioremap_ipu: +err_noirq: + dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret); + return ret; +} + +static int ipu_remove(struct platform_device *pdev) +{ + struct ipu *ipu = platform_get_drvdata(pdev); + + ipu_idmac_exit(ipu); + ipu_irq_detach_irq(ipu, pdev); + clk_disable(ipu->ipu_clk); + clk_put(ipu->ipu_clk); + iounmap(ipu->reg_ic); + iounmap(ipu->reg_ipu); + tasklet_kill(&ipu->tasklet); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* + * We need two MEM resources - with IPU-common and Image Converter registers, + * including PF_CONF and IDMAC_* registers, and two IRQs - function and error + */ +static struct platform_driver ipu_platform_driver = { + .driver = { + .name = "ipu-core", + .owner = THIS_MODULE, + }, + .remove = ipu_remove, +}; + +static int __init ipu_init(void) +{ + return platform_driver_probe(&ipu_platform_driver, ipu_probe); +} +subsys_initcall(ipu_init); + +MODULE_DESCRIPTION("IPU core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Guennadi Liakhovetski "); +MODULE_ALIAS("platform:ipu-core"); diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h new file mode 100644 index 0000000..545cf11 --- /dev/null +++ b/drivers/dma/ipu/ipu_intern.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_INTERN_H_ +#define _IPU_INTERN_H_ + +#include +#include +#include + +/* IPU Common registers */ +#define IPU_CONF 0x00 +#define IPU_CHA_BUF0_RDY 0x04 +#define IPU_CHA_BUF1_RDY 0x08 +#define IPU_CHA_DB_MODE_SEL 0x0C +#define IPU_CHA_CUR_BUF 0x10 +#define IPU_FS_PROC_FLOW 0x14 +#define IPU_FS_DISP_FLOW 0x18 +#define IPU_TASKS_STAT 0x1C +#define IPU_IMA_ADDR 0x20 +#define IPU_IMA_DATA 0x24 +#define IPU_INT_CTRL_1 0x28 +#define IPU_INT_CTRL_2 0x2C +#define IPU_INT_CTRL_3 0x30 +#define IPU_INT_CTRL_4 0x34 +#define IPU_INT_CTRL_5 0x38 +#define IPU_INT_STAT_1 0x3C +#define IPU_INT_STAT_2 0x40 +#define IPU_INT_STAT_3 0x44 +#define IPU_INT_STAT_4 0x48 +#define IPU_INT_STAT_5 0x4C +#define IPU_BRK_CTRL_1 0x50 +#define IPU_BRK_CTRL_2 0x54 +#define IPU_BRK_STAT 0x58 +#define IPU_DIAGB_CTRL 0x5C + +/* IPU_CONF Register bits */ +#define IPU_CONF_CSI_EN 0x00000001 +#define IPU_CONF_IC_EN 0x00000002 +#define IPU_CONF_ROT_EN 0x00000004 +#define IPU_CONF_PF_EN 0x00000008 +#define IPU_CONF_SDC_EN 0x00000010 +#define IPU_CONF_ADC_EN 0x00000020 +#define IPU_CONF_DI_EN 0x00000040 +#define IPU_CONF_DU_EN 0x00000080 +#define IPU_CONF_PXL_ENDIAN 0x00000100 + +/* Image Converter Registers */ +#define IC_CONF 0x88 +#define IC_PRP_ENC_RSC 0x8C +#define IC_PRP_VF_RSC 0x90 +#define IC_PP_RSC 0x94 +#define IC_CMBP_1 0x98 +#define IC_CMBP_2 0x9C +#define PF_CONF 0xA0 +#define IDMAC_CONF 0xA4 +#define IDMAC_CHA_EN 0xA8 +#define IDMAC_CHA_PRI 0xAC +#define IDMAC_CHA_BUSY 0xB0 + +/* Image Converter Register bits */ +#define IC_CONF_PRPENC_EN 0x00000001 +#define IC_CONF_PRPENC_CSC1 0x00000002 +#define IC_CONF_PRPENC_ROT_EN 0x00000004 +#define IC_CONF_PRPVF_EN 0x00000100 +#define IC_CONF_PRPVF_CSC1 0x00000200 +#define IC_CONF_PRPVF_CSC2 0x00000400 +#define IC_CONF_PRPVF_CMB 0x00000800 +#define IC_CONF_PRPVF_ROT_EN 0x00001000 +#define IC_CONF_PP_EN 0x00010000 +#define IC_CONF_PP_CSC1 0x00020000 +#define IC_CONF_PP_CSC2 0x00040000 +#define IC_CONF_PP_CMB 0x00080000 +#define IC_CONF_PP_ROT_EN 0x00100000 +#define IC_CONF_IC_GLB_LOC_A 0x10000000 +#define IC_CONF_KEY_COLOR_EN 0x20000000 +#define IC_CONF_RWS_EN 0x40000000 +#define IC_CONF_CSI_MEM_WR_EN 0x80000000 + +#define IDMA_CHAN_INVALID 0x000000FF +#define IDMA_IC_0 0x00000001 +#define IDMA_IC_1 0x00000002 +#define IDMA_IC_2 0x00000004 +#define IDMA_IC_3 0x00000008 +#define IDMA_IC_4 0x00000010 +#define IDMA_IC_5 0x00000020 +#define IDMA_IC_6 0x00000040 +#define IDMA_IC_7 0x00000080 +#define IDMA_IC_8 0x00000100 +#define IDMA_IC_9 0x00000200 +#define IDMA_IC_10 0x00000400 +#define IDMA_IC_11 0x00000800 +#define IDMA_IC_12 0x00001000 +#define IDMA_IC_13 0x00002000 +#define IDMA_SDC_BG 0x00004000 +#define IDMA_SDC_FG 0x00008000 +#define IDMA_SDC_MASK 0x00010000 +#define IDMA_SDC_PARTIAL 0x00020000 +#define IDMA_ADC_SYS1_WR 0x00040000 +#define IDMA_ADC_SYS2_WR 0x00080000 +#define IDMA_ADC_SYS1_CMD 0x00100000 +#define IDMA_ADC_SYS2_CMD 0x00200000 +#define IDMA_ADC_SYS1_RD 0x00400000 +#define IDMA_ADC_SYS2_RD 0x00800000 +#define IDMA_PF_QP 0x01000000 +#define IDMA_PF_BSP 0x02000000 +#define IDMA_PF_Y_IN 0x04000000 +#define IDMA_PF_U_IN 0x08000000 +#define IDMA_PF_V_IN 0x10000000 +#define IDMA_PF_Y_OUT 0x20000000 +#define IDMA_PF_U_OUT 0x40000000 +#define IDMA_PF_V_OUT 0x80000000 + +#define TSTAT_PF_H264_PAUSE 0x00000001 +#define TSTAT_CSI2MEM_MASK 0x0000000C +#define TSTAT_CSI2MEM_OFFSET 2 +#define TSTAT_VF_MASK 0x00000600 +#define TSTAT_VF_OFFSET 9 +#define TSTAT_VF_ROT_MASK 0x000C0000 +#define TSTAT_VF_ROT_OFFSET 18 +#define TSTAT_ENC_MASK 0x00000180 +#define TSTAT_ENC_OFFSET 7 +#define TSTAT_ENC_ROT_MASK 0x00030000 +#define TSTAT_ENC_ROT_OFFSET 16 +#define TSTAT_PP_MASK 0x00001800 +#define TSTAT_PP_OFFSET 11 +#define TSTAT_PP_ROT_MASK 0x00300000 +#define TSTAT_PP_ROT_OFFSET 20 +#define TSTAT_PF_MASK 0x00C00000 +#define TSTAT_PF_OFFSET 22 +#define TSTAT_ADCSYS1_MASK 0x03000000 +#define TSTAT_ADCSYS1_OFFSET 24 +#define TSTAT_ADCSYS2_MASK 0x0C000000 +#define TSTAT_ADCSYS2_OFFSET 26 + +#define TASK_STAT_IDLE 0 +#define TASK_STAT_ACTIVE 1 +#define TASK_STAT_WAIT4READY 2 + +struct idmac { + struct dma_device dma; +}; + +struct ipu { + void __iomem *reg_ipu; + void __iomem *reg_ic; + unsigned int irq_fn; /* IPU Function IRQ to the CPU */ + unsigned int irq_err; /* IPU Error IRQ to the CPU */ + unsigned int irq_base; /* Beginning of the IPU IRQ range */ + unsigned long channel_init_mask; + spinlock_t lock; + struct clk *ipu_clk; + struct device *dev; + struct idmac idmac; + struct idmac_channel channel[IPU_CHANNELS_NUM]; + struct tasklet_struct tasklet; +}; + +#define to_idmac(d) container_of(d, struct idmac, dma) + +extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev); +extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev); + +extern bool ipu_irq_status(uint32_t irq); +extern int ipu_irq_map(unsigned int source); +extern int ipu_irq_unmap(unsigned int source); + +#endif diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c new file mode 100644 index 0000000..83f532c --- /dev/null +++ b/drivers/dma/ipu/ipu_irq.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ipu_intern.h" + +/* + * Register read / write - shall be inlined by the compiler + */ +static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + + +/* + * IPU IRQ chip driver + */ + +#define IPU_IRQ_NR_FN_BANKS 3 +#define IPU_IRQ_NR_ERR_BANKS 2 +#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS) + +struct ipu_irq_bank { + unsigned int control; + unsigned int status; + spinlock_t lock; + struct ipu *ipu; +}; + +static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = { + /* 3 groups of functional interrupts */ + { + .control = IPU_INT_CTRL_1, + .status = IPU_INT_STAT_1, + }, { + .control = IPU_INT_CTRL_2, + .status = IPU_INT_STAT_2, + }, { + .control = IPU_INT_CTRL_3, + .status = IPU_INT_STAT_3, + }, + /* 2 groups of error interrupts */ + { + .control = IPU_INT_CTRL_4, + .status = IPU_INT_STAT_4, + }, { + .control = IPU_INT_CTRL_5, + .status = IPU_INT_STAT_5, + }, +}; + +struct ipu_irq_map { + unsigned int irq; + int source; + struct ipu_irq_bank *bank; + struct ipu *ipu; +}; + +static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS]; +/* Protects allocations from the above array of maps */ +static DEFINE_MUTEX(map_lock); +/* Protects register accesses and individual mappings */ +static DEFINE_SPINLOCK(bank_lock); + +static struct ipu_irq_map *src2map(unsigned int src) +{ + int i; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) + if (irq_map[i].source == src) + return irq_map + i; + + return NULL; +} + +static void ipu_irq_unmask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg |= (1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_mask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg &= ~(1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_ack(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status); + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +/** + * ipu_irq_status() - returns the current interrupt status of the specified IRQ. + * @irq: interrupt line to get status for. + * @return: true if the interrupt is pending/asserted or false if the + * interrupt is not pending. + */ +bool ipu_irq_status(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + bool ret; + + spin_lock_irqsave(&bank_lock, lock_flags); + bank = map->bank; + ret = bank && ipu_read_reg(bank->ipu, bank->status) & + (1UL << (map->source & 31)); + spin_unlock_irqrestore(&bank_lock, lock_flags); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see below) + * @return: mapped IRQ number or negative error code + * + * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ + * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17. + * However, the source argument of this function is not the sequence number of + * the possible IRQ, but rather its bit position. So, first interrupt in fourth + * register has source number 96, and not 88. This makes calculations easier, + * and also provides forward compatibility with any future IPU implementations + * with any interrupt bit assignments. + */ +int ipu_irq_map(unsigned int source) +{ + int i, ret = -ENOMEM; + struct ipu_irq_map *map; + + might_sleep(); + + mutex_lock(&map_lock); + map = src2map(source); + if (map) { + pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq); + ret = -EBUSY; + goto out; + } + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source < 0) { + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = source; + irq_map[i].bank = irq_bank + source / 32; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = irq_map[i].irq; + pr_debug("IPU: mapped source %u to IRQ %u\n", + source, ret); + break; + } + } +out: + mutex_unlock(&map_lock); + + if (ret < 0) + pr_err("IPU: couldn't map source %u: %d\n", source, ret); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see ipu_irq_map()) + * @return: 0 or negative error code + */ +int ipu_irq_unmap(unsigned int source) +{ + int i, ret = -EINVAL; + + might_sleep(); + + mutex_lock(&map_lock); + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source == source) { + unsigned long lock_flags; + + pr_debug("IPU: unmapped source %u from IRQ %u\n", + source, irq_map[i].irq); + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = -EINVAL; + irq_map[i].bank = NULL; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = 0; + break; + } + } + mutex_unlock(&map_lock); + + return ret; +} + +/* Chained IRQ handler for IPU error interrupt */ +static void ipu_irq_err(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* + * Don't think we have to clear all interrupts here, they will + * be acked by ->handle_irq() (handle_level_irq). However, we + * might want to clear unhandled interrupts after the loop... + */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +/* Chained IRQ handler for IPU function interrupt */ +static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* Not clearing all interrupts, see above */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +static struct irq_chip ipu_irq_chip = { + .name = "ipu_irq", + .ack = ipu_irq_ack, + .mask = ipu_irq_mask, + .unmask = ipu_irq_unmask, +}; + +/* Install the IRQ handler */ +int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base, i; + + irq_base = pdata->irq_base; + + for (i = 0; i < IPU_IRQ_NR_BANKS; i++) + irq_bank[i].ipu = ipu; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + int ret; + + irq = irq_base + i; + ret = set_irq_chip(irq, &ipu_irq_chip); + if (ret < 0) + return ret; + ret = set_irq_chip_data(irq, irq_map + i); + if (ret < 0) + return ret; + irq_map[i].ipu = ipu; + irq_map[i].irq = irq; + irq_map[i].source = -EINVAL; + set_irq_handler(irq, handle_level_irq); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); +#endif + } + + set_irq_data(ipu->irq_fn, ipu); + set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn); + + set_irq_data(ipu->irq_err, ipu); + set_irq_chained_handler(ipu->irq_err, ipu_irq_err); + + return 0; +} + +void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base; + + irq_base = pdata->irq_base; + + set_irq_chained_handler(ipu->irq_fn, NULL); + set_irq_data(ipu->irq_fn, NULL); + + set_irq_chained_handler(ipu->irq_err, NULL); + set_irq_data(ipu->irq_err, NULL); + + for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } +} -- cgit v0.10.2 From bfa318ad52a23f1e303d176b44366cdd2bb71ad2 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 15 Jan 2009 15:46:08 +0100 Subject: fix: crash: IP: __bitmap_intersects+0x48/0x73 -tip testing found this crash: > [ 35.258515] calling acpi_cpufreq_init+0x0/0x127 @ 1 > [ 35.264127] BUG: unable to handle kernel NULL pointer dereference at (null) > [ 35.267554] IP: [] __bitmap_intersects+0x48/0x73 > [ 35.267554] PGD 0 > [ 35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no allocation of the variable mask, so we pass in an uninitialized cmd.mask field to drv_read(), which then passes it to the scheduler which then crashes ... Switch it over to the much simpler constant-cpumask-pointers approach. Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 5bf2c83..4b1c319 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -145,7 +145,7 @@ typedef union { struct drv_cmd { unsigned int type; - cpumask_var_t mask; + const struct cpumask *mask; drv_addr_union addr; u32 val; }; @@ -231,6 +231,7 @@ static u32 get_cur_val(const struct cpumask *mask) return 0; } + cmd.mask = mask; drv_read(&cmd); dprintk("get_cur_val = %u\n", cmd.val); @@ -397,9 +398,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, return -ENODEV; } - if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL))) - return -ENOMEM; - perf = data->acpi_data; result = cpufreq_frequency_table_target(policy, data->freq_table, @@ -444,9 +442,9 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, /* cpufreq holds the hotplug lock, so we are safe from here on */ if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cpumask_and(cmd.mask, cpu_online_mask, policy->cpus); + cmd.mask = policy->cpus; else - cpumask_copy(cmd.mask, cpumask_of(policy->cpu)); + cmd.mask = cpumask_of(policy->cpu); freqs.old = perf->states[perf->state].core_frequency * 1000; freqs.new = data->freq_table[next_state].frequency; @@ -473,7 +471,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, perf->state = next_perf_state; out: - free_cpumask_var(cmd.mask); return result; } -- cgit v0.10.2 From f5495506c3c1300d249d403c36f92de71920dbeb Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Mon, 19 Jan 2009 13:46:41 -0800 Subject: x86: remove kernel_physical_mapping_init() from init section Impact: fix crash with memory hotplug enabled kernel_physical_mapping_init() is called during memory hotplug so it does not belong in the init section. If the kernel is built with CONFIG_DEBUG_SECTION_MISMATCH=y on the make command line, arch/x86/mm/init_64.c is compiled with the -fno-inline-functions-called-once gcc option defeating inlining of kernel_physical_mapping_init() within init_memory_mapping(). When kernel_physical_mapping_init() is not inlined it is placed in the .init.text section according to the __init in it's current declaration. A later call to kernel_physical_mapping_init() during a memory hotplug operation encounters an int3 trap because the .init.text section memory has been freed. This patch eliminates the crash caused by the int3 trap by moving the non-inlined kernel_physical_mapping_init() from .init.text to .meminit.text. Signed-off-by: Gary Hade Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 23f68e7..e6d36b4 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -596,7 +596,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -static unsigned long __init kernel_physical_mapping_init(unsigned long start, +static unsigned long __meminit kernel_physical_mapping_init(unsigned long start, unsigned long end, unsigned long page_size_mask) { -- cgit v0.10.2 From 70b9986ca4baaf6deb6f0e01d50f72457579adea Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:48 +0000 Subject: bnx2x: Free IRQ Error check could result with not freeing the IRQ Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7c53379..ce98ecf 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6684,6 +6684,9 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* Release IRQs */ + bnx2x_free_irq(bp); + /* Wait until tx fast path tasks complete */ for_each_queue(bp, i) { struct bnx2x_fastpath *fp = &bp->fp[i]; @@ -6711,9 +6714,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Give HW time to discard old tx messages */ msleep(1); - /* Release IRQs */ - bnx2x_free_irq(bp); - if (CHIP_IS_E1(bp)) { struct mac_configuration_cmd *config = bnx2x_sp(bp, mcast_config); -- cgit v0.10.2 From 693fc0d14334859430733ab902adac182fdd8153 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:52 +0000 Subject: bnx2x: Handling probe failures Failures in the probe not handled correctly - separate the flow to handle different failures Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ce98ecf..9110675 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -10269,17 +10269,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return rc; } - rc = register_netdev(dev); - if (rc) { - dev_err(&pdev->dev, "Cannot register net device\n"); - goto init_one_exit; - } - pci_set_drvdata(pdev, dev); rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + rc = register_netdev(dev); if (rc) { - unregister_netdev(dev); + dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } -- cgit v0.10.2 From b4661739c67acd15a02f8e112f8cc52d24b609ed Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:56 +0000 Subject: bnx2x: Potential race after iSCSI boot The lock was release too soon. Make sure the HW is marked as locked until the boot driver was unloaded from FW perspective Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 9110675..70fc610 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6874,10 +6874,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (val == 0x7) - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; /* save our func */ @@ -6885,6 +6881,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) u32 swap_en; u32 swap_val; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + BNX2X_DEV_INFO("UNDI is active! reset device\n"); /* try unload UNDI on port 0 */ @@ -6910,6 +6909,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code); } + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0), 0x1000); @@ -6954,7 +6956,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } + + } else + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); } } -- cgit v0.10.2 From af2464011f0954785687071b298f066f6cbb1c84 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:43:59 +0000 Subject: bnx2x: Wrong HDR offset in CAM Has a negative side effect when sending MAC update with no content (as done in the self-test) Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 70fc610..8f8271d 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6144,7 +6144,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set) * multicast 64-127:port0 128-191:port1 */ config->hdr.length_6b = 2; - config->hdr.offset = port ? 31 : 0; + config->hdr.offset = port ? 32 : 0; config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -8910,7 +8910,10 @@ static int bnx2x_test_intr(struct bnx2x *bp) return -ENODEV; config->hdr.length_6b = 0; - config->hdr.offset = 0; + if (CHIP_IS_E1(bp)) + config->hdr.offset = (BP_PORT(bp) ? 32 : 0); + else + config->hdr.offset = BP_FUNC(bp); config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -9863,7 +9866,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev) for (; i < old; i++) { if (CAM_IS_INVALID(config-> config_table[i])) { - i--; /* already invalidated */ + /* already invalidated */ break; } /* invalidate */ -- cgit v0.10.2 From 5a40e08e666e8caa1227333de41fd1e2cd84d4f5 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:04 +0000 Subject: bnx2x: Read chip ID Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 8f8271d..7ee6a21 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6975,7 +6975,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) id |= ((val & 0xf) << 12); val = REG_RD(bp, MISC_REG_CHIP_METAL); id |= ((val & 0xff) << 4); - REG_RD(bp, MISC_REG_BOND_ID); + val = REG_RD(bp, MISC_REG_BOND_ID); id |= (val & 0xf); bp->common.chip_id = id; bp->link_params.chip_id = bp->common.chip_id; -- cgit v0.10.2 From 2add3acb11a26cc14b54669433ae6ace6406cbf2 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:07 +0000 Subject: bnx2x: Block nvram access when the device is inactive Don't dump eeprom when bnx2x adapter is down. Running ethtool -e causes an eeh without it when the device is down Signed-off-by: Paul Larson Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7ee6a21..ca5090c 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -8107,6 +8107,9 @@ static int bnx2x_get_eeprom(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); int rc; + if (!netif_running(dev)) + return -EAGAIN; + DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, -- cgit v0.10.2 From 632da4d66324b5baf947a048dd1f1e9093b6dd90 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:10 +0000 Subject: bnx2x: Overstepping array bounds If the page size is > 8KB this violation happens Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ca5090c..2e00da6 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -9427,6 +9427,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) return rc; } +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* check if packet requires linearization (packet is too fragmented) */ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, u32 xmit_type) @@ -9504,6 +9505,7 @@ exit_lbl: return to_copy; } +#endif /* called with netif_tx_lock * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call @@ -9544,6 +9546,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { @@ -9556,6 +9559,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } } +#endif /* Please read carefully. First we use one BD which we mark as start, -- cgit v0.10.2 From 6c55c3cdc86881383075a933594748b30dd0054b Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:13 +0000 Subject: bnx2x: 1G-10G toggling race The HW should be configured so fast toggling between 1G and 10G will not be missed. Make sure that the HW is re-configured in full Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index fefa6ab..d9e1cfc 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params, val &= ~0x810; EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); + /* enable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); + /* enable emac for jumbo packets */ EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, (EMAC_RX_MTU_SIZE_JUMBO_ENA | @@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, u32 gp_status) { struct bnx2x *bp = params->bp; - + u16 new_line_speed; u8 rc = 0; vars->link_status = 0; @@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, switch (gp_status & GP_STATUS_SPEED_MASK) { case GP_STATUS_10M: - vars->line_speed = SPEED_10; + new_line_speed = SPEED_10; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else @@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_100M: - vars->line_speed = SPEED_100; + new_line_speed = SPEED_100; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else @@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_1G: case GP_STATUS_1G_KX: - vars->line_speed = SPEED_1000; + new_line_speed = SPEED_1000; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else @@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_2_5G: - vars->line_speed = SPEED_2500; + new_line_speed = SPEED_2500; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else @@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: - vars->line_speed = SPEED_10000; + new_line_speed = SPEED_10000; vars->link_status |= LINK_10GTFD; break; case GP_STATUS_12G_HIG: - vars->line_speed = SPEED_12000; + new_line_speed = SPEED_12000; vars->link_status |= LINK_12GTFD; break; case GP_STATUS_12_5G: - vars->line_speed = SPEED_12500; + new_line_speed = SPEED_12500; vars->link_status |= LINK_12_5GTFD; break; case GP_STATUS_13G: - vars->line_speed = SPEED_13000; + new_line_speed = SPEED_13000; vars->link_status |= LINK_13GTFD; break; case GP_STATUS_15G: - vars->line_speed = SPEED_15000; + new_line_speed = SPEED_15000; vars->link_status |= LINK_15GTFD; break; case GP_STATUS_16G: - vars->line_speed = SPEED_16000; + new_line_speed = SPEED_16000; vars->link_status |= LINK_16GTFD; break; @@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; } + /* Upon link speed change set the NIG into drain mode. + Comes to deals with possible FIFO glitch due to clk change + when speed is decreased without link down indicator */ + if (new_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + msleep(1); + } + vars->line_speed = new_line_speed; vars->link_status |= LINK_STATUS_SERDES_LINK; if ((params->req_line_speed == SPEED_AUTO_NEG) && @@ -4194,6 +4206,11 @@ static u8 bnx2x_update_link_down(struct link_params *params, /* activate nig drain */ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + /* reset BigMac */ bnx2x_bmac_rx_disable(bp, params->port); REG_WR(bp, GRCBASE_MISC + @@ -4238,6 +4255,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, /* update shared memory */ bnx2x_update_mng(params, vars->link_status); + msleep(20); return rc; } /* This function should called upon link interrupt */ @@ -4276,6 +4294,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); /* Check external link change only for non-direct */ -- cgit v0.10.2 From 3858276b7198074bf3570470463808627f0c9e31 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:16 +0000 Subject: bnx2x: Prevent self test loopback failures Setting loopback requires time to take effect Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index d9e1cfc..4ce107c1 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3583,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params, (MDIO_REG_BANK_CL73_IEEEB0 + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), 0x6041); - + msleep(200); /* set aer mmd back */ bnx2x_set_aer_mmd(params, vars); -- cgit v0.10.2 From 44722d1d216c9dd4536de5f88fe8320b07e68a96 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:21 +0000 Subject: bnx2x: Legacy speeds autoneg failures 10M/100M autoneg was not establishing link. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 4ce107c1..2fd6be0 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -3882,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params, } if (vars->phy_flags & PHY_XGXS_FLAG) { - if (params->req_line_speed && + if ((params->req_line_speed && ((params->req_line_speed == SPEED_100) || - (params->req_line_speed == SPEED_10))) { + (params->req_line_speed == SPEED_10))) || + (!params->req_line_speed && + (params->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (params->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + )) { vars->phy_flags |= PHY_SGMII_FLAG; } else { vars->phy_flags &= ~PHY_SGMII_FLAG; -- cgit v0.10.2 From 16b311cc29806bb968746c1a752a087b32841af9 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:24 +0000 Subject: bnx2x: Handling PHY FW load failure If the default PHY version (0x4321) is read - the PHY FW load failed Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 2fd6be0..b4527a4 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -4404,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) ext_phy_addr[port], MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0) { + if (fw_ver1 == 0 || fw_ver1 == 0x4321) { DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x " - "fw Download failed\n", port); + "bnx2x_8073_common_init_phy port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); return -EINVAL; } -- cgit v0.10.2 From e47d7e6eb841c1850f0e69b95ae6cf3c86881f53 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:44:28 +0000 Subject: bnx2x: Driver description update The Driver supports the 57711 and 57711E as well but the description was out of date Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 2e00da6..dc05e37 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -69,7 +69,7 @@ static char version[] __devinitdata = DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir"); -MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -- cgit v0.10.2 From 237907c1ded8a1a447cea7c4f97ab853e8b46052 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 14 Jan 2009 06:42:44 +0000 Subject: bnx2x: Barriers for the compiler To make sure no swapping are made by the compiler, changed HAS_WORK to inline functions and added all the necessary barriers Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6fcccef..18f60aa 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -271,14 +271,7 @@ struct bnx2x_fastpath { #define bnx2x_fp(bp, nr, var) (bp->fp[nr].var) -#define BNX2X_HAS_TX_WORK(fp) \ - ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \ - (fp->tx_pkt_prod != fp->tx_pkt_cons)) - -#define BNX2X_HAS_RX_WORK(fp) \ - (fp->rx_comp_cons != rx_cons_sb) - -#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) +#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp)) /* MC hsi */ diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index dc05e37..3236527 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -733,6 +733,17 @@ static u16 bnx2x_ack_int(struct bnx2x *bp) * fast path service functions */ +static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) +{ + u16 tx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb); + return ((fp->tx_pkt_prod != tx_cons_sb) || + (fp->tx_pkt_prod != fp->tx_pkt_cons)); +} + /* free skb in the packet ring at pos idx * return idx of last bd freed */ @@ -6693,7 +6704,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) cnt = 1000; smp_rmb(); - while (BNX2X_HAS_TX_WORK(fp)) { + while (bnx2x_has_tx_work(fp)) { bnx2x_tx_int(fp, 1000); if (!cnt) { @@ -9281,6 +9292,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) return 0; } +static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) +{ + u16 rx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; + return (fp->rx_comp_cons != rx_cons_sb); +} + /* * net_device service functions */ @@ -9291,7 +9314,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) napi); struct bnx2x *bp = fp->bp; int work_done = 0; - u16 rx_cons_sb; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -9304,19 +9326,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) bnx2x_update_fpsb_idx(fp); - if (BNX2X_HAS_TX_WORK(fp)) + if (bnx2x_has_tx_work(fp)) bnx2x_tx_int(fp, budget); - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; - if (BNX2X_HAS_RX_WORK(fp)) + if (bnx2x_has_rx_work(fp)) work_done = bnx2x_rx_int(fp, budget); - rmb(); /* BNX2X_HAS_WORK() reads the status block */ - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; /* must not complete if we consumed full budget */ if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { -- cgit v0.10.2 From d05c26ce690e867aabfc7d708d481e0f86f23496 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Sat, 17 Jan 2009 23:26:13 -0800 Subject: bnx2x: Version update Updating the version and the year of updated files Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 18f60aa..15a5cf0 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index b4527a4..aea26b4 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008 Broadcom Corporation +/* Copyright 2008-2009 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 3236527..074374f 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.23" -#define DRV_MODULE_RELDATE "2008/11/03" +#define DRV_MODULE_VERSION "1.45.24" +#define DRV_MODULE_RELDATE "2009/01/14" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index a67b0c3..d084e5f 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v0.10.2 From 24e94de41e76134fad05552588fe01af2cab1494 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 18 Jan 2009 21:32:11 -0800 Subject: net/9p: fid->fid is used uninitialized Signed-off-by: Roel Kluin Signed-off-by: David S. Miller diff --git a/net/9p/client.c b/net/9p/client.c index 821f1ec..1eb580c 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -618,7 +618,7 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) return ERR_PTR(-ENOMEM); ret = p9_idpool_get(clnt->fidpool); - if (fid->fid < 0) { + if (ret < 0) { ret = -ENOSPC; goto error; } -- cgit v0.10.2 From 39eddb4c3970e9aadbc87b8a7cab7b4fefff077f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Sun, 18 Jan 2009 21:57:35 -0800 Subject: macb: avoid lockup when TGO during underrun MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In rare cases when an underrun occur, all macb buffers where consumed and the netif_queue was stopped infinitely. This happens then the TGO (transfer ongoing) bit in the TSR is set (and UND). It seems like clening up after the underrun makes the driver and the macb hardware end up in an inconsistent state. The result of this is that in the following calls to macb_tx no TX buffers are released -> the netif_queue was stopped, and never woken up again. The solution is to disable the transmitter, if TGO is set, before clening up after the underrun, and re-enable the transmitter when the cleaning up is done. Signed-off-by: Richard Röjfors Signed-off-by: David S. Miller diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a04da4e..f6c4936 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp) printk(KERN_ERR "%s: TX underrun, resetting buffers\n", bp->dev->name); + /* Transfer ongoing, disable transmitter, to avoid confusion */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE)); + head = bp->tx_head; /*Mark all the buffer as used to avoid sending a lost buffer*/ @@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp) } bp->tx_head = bp->tx_tail = 0; + + /* Enable the transmitter again */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE)); } if (!(status & MACB_BIT(COMP))) -- cgit v0.10.2 From eed087e367591fc08490d7c6c2779b4b72c8f20c Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 18 Jan 2009 22:01:32 -0800 Subject: cxgb3: Fix LRO misalignment The lro manager's frag_align_pad setting was missing, leading to misaligned access to the skb passed up to the stack. Tested-by: Rick Jones Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 14f9fb3..379a132 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr) { lro_mgr->dev = qs->netdev; lro_mgr->features = LRO_F_NAPI; + lro_mgr->frag_align_pad = NET_IP_ALIGN; lro_mgr->ip_summed = CHECKSUM_UNNECESSARY; lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY; lro_mgr->max_desc = T3_MAX_LRO_SES; -- cgit v0.10.2 From 6a2fe9834e578590f4a2fbe18a574465ab0e127c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:55 +0000 Subject: korina: fix loop back of receive descriptors After the last loop iteration, i has the value RC32434_NUM_RDS and therefore leads to an index overflow when used afterwards to address the last element. This is yet another another bug introduced when rewriting parts of the driver for upstream preparation, as the original driver used 'RC32434_NUM_RDS - 1' instead. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 1d6e48e..67fbdf4 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -769,11 +769,12 @@ static void korina_alloc_ring(struct net_device *dev) lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); } - /* loop back */ - lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]); - lp->rx_next_done = 0; + /* loop back receive descriptors, so the last + * descriptor points to the first one */ + lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]); + lp->rd_ring[i - 1].control |= DMA_DESC_COD; - lp->rd_ring[i].control |= DMA_DESC_COD; + lp->rx_next_done = 0; lp->rx_chain_head = 0; lp->rx_chain_tail = 0; lp->rx_chain_status = desc_empty; -- cgit v0.10.2 From 63a66c6c0debcae70183849121734fd4809e1dde Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:56 +0000 Subject: korina: adjust headroom for new skb's also This is copy and paste from the original driver. As skb_reserve() is also called within korina_alloc_ring() when initially allocating the receive descriptors, the same should be done when allocating new space after passing an skb to upper layers. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 67fbdf4..60ae7bf 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) if (devcs & ETH_RX_MP) dev->stats.multicast++; + /* 16 bit align */ + skb_reserve(skb_new, 2); + lp->rx_skb[lp->rx_next_done] = skb_new; } -- cgit v0.10.2 From e85bf47e6ded66ea138f692fe149c00a4998afe8 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 15 Jan 2009 12:29:57 +0000 Subject: korina: drop leftover assignment As the assigned value is being overwritten shortly after, it can be dropped and so the whole variable definition moved to the start of the function. Signed-off-by: Phil Sutter Acked-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 60ae7bf..75010ca 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -743,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { static void korina_alloc_ring(struct net_device *dev) { struct korina_private *lp = netdev_priv(dev); + struct sk_buff *skb; int i; /* Initialize the transmit descriptors */ @@ -758,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) /* Initialize the receive descriptors */ for (i = 0; i < KORINA_NUM_RDS; i++) { - struct sk_buff *skb = lp->rx_skb[i]; - skb = dev_alloc_skb(KORINA_RBSIZE + 2); if (!skb) break; -- cgit v0.10.2 From 67fd1a731ff1a990d4da7689909317756e50cb4d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 19 Jan 2009 16:26:44 -0800 Subject: net: Add debug info to track down GSO checksum bug I'm trying to track down why people're hitting the checksum warning in skb_gso_segment. As the problem seems to be hitting lots of people and I can't reproduce it or locate the bug, here is a patch to print out more details which hopefully should help us to track this down. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 8d67597..6e44c32 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1534,7 +1534,19 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features) skb->mac_len = skb->network_header - skb->mac_header; __skb_pull(skb, skb->mac_len); - if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) { + if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { + struct net_device *dev = skb->dev; + struct ethtool_drvinfo info = {}; + + if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) + dev->ethtool_ops->get_drvinfo(dev, &info); + + WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d " + "ip_summed=%d", + info.driver, dev ? dev->features : 0L, + skb->sk ? skb->sk->sk_route_caps : 0L, + skb->len, skb->data_len, skb->ip_summed); + if (skb_header_cloned(skb) && (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) return ERR_PTR(err); -- cgit v0.10.2 From 15005a320473b8d3676b878deb29bbe738ef9027 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Mon, 19 Jan 2009 16:54:13 -0800 Subject: ixgbe: fix dca issue with relaxed ordering turned on The is an issue where setting Relaxed Ordering (RO) bit (in a PCI-E write transaction) on 82598 causing the chipset to drop DCA hints. This patch forces RO not to be set for descriptors as well as payload. This will only be in effect while DCA is enabled and no performance difference was noticed in testing. Signed-off-by: Don Skidmore Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index acef3c6..92d9b17 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); rx_ring->cpu = cpu; } diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 83a11ff..f011c57 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -404,6 +404,9 @@ #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ -- cgit v0.10.2 From 068c89b014ebd27b1c09c3c772e9d982988e7786 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Mon, 19 Jan 2009 16:54:36 -0800 Subject: ixgbe: fix tag stripping for VLAN ID 0 Register VLAN ID 0 so that frames with VLAN ID 0 are received and get their tag stripped when ixgbe is not in DCB mode. VLAN ID 0 means that the frame is 'priority tagged' only - it is not a VLAN, but the priority value is the tag in valid. The functions ixgbe_vlan_rx_register() and ixgbe_vlan_rx_kill_vid() were moved up a couple functions to correct compiling issues with this change. Signed-off-by: Don Skidmore Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Eric W Multanen Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 92d9b17..bf36737 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1744,6 +1744,32 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + /* add VID to filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter); + + /* remove VID from filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); +} + static void ixgbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { @@ -1763,6 +1789,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + ixgbe_vlan_rx_add_vid(netdev, 0); if (grp) { /* enable VLAN tag insert/strip */ @@ -1776,32 +1803,6 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ixgbe_irq_enable(adapter); } -static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - /* add VID to filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); -} - -static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_enable(adapter); - - /* remove VID from filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); -} - static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); -- cgit v0.10.2 From 1da100bb47ef32cb43bb6a365f64183898f830b5 Mon Sep 17 00:00:00 2001 From: Peter P Waskiewicz Jr Date: Mon, 19 Jan 2009 16:55:03 -0800 Subject: ixgbe: Fix usage of netif_*_all_queues() with netif_carrier_{off|on}() netif_carrier_off() is sufficient to stop Tx into the driver. Stopping the Tx queues is redundant and unnecessary. By the same token, netif_carrier_on() will be sufficient to re-enable Tx, so waking the queues is unnecessary. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index bf36737..d2f4d5f 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2078,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_irq_enable(adapter); + /* enable transmits */ + netif_tx_start_all_queues(netdev); + /* bring the link up in the watchdog, this could race with our first * link up interrupt but shouldn't be a problem */ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; @@ -3479,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) (FLOW_TX ? "TX" : "None")))); netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -3491,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) printk(KERN_INFO "ixgbe: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); } } @@ -4222,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); -- cgit v0.10.2 From 9e9fd12dc0679643c191fc9795a3021807e77de4 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 19 Jan 2009 16:57:45 -0800 Subject: tg3: Fix firmware loading This patch modifies how the tg3 driver handles device firmware. The patch starts by consolidating David Woodhouse's earlier patch under the same name. Specifically, the patch moves the request_firmware call into a separate tg3_request_firmware() function and calls that function from tg3_open() rather than tg3_init_one(). The patch then goes on to limit the number of devices that will make request_firmware calls. The original firmware patch unnecessarily requested TSO firmware for devices that did not need it. This patch reduces the set of devices making TSO firmware patches to approximately the following device set : 5703, 5704, and 5705. Finally, the patch reduces the effects of a request_firmware() failure. For those devices that are requesting TSO firmware, the driver will turn off the TSO capability. If TSO firmware becomes available at a later time, the device can be closed and then opened again to reacquire the TSO capability. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5e2dbae..8b3f846 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp) return err; } +static int tg3_request_firmware(struct tg3 *tp) +{ + const __be32 *fw_data; + + if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { + printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", + tp->dev->name, tp->fw_needed); + return -ENOENT; + } + + fw_data = (void *)tp->fw->data; + + /* Firmware blob starts with version numbers, followed by + * start address and _full_ length including BSS sections + * (which must be longer than the actual data, of course + */ + + tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ + if (tp->fw_len < (tp->fw->size - 12)) { + printk(KERN_ERR "%s: bogus length %d in \"%s\"\n", + tp->dev->name, tp->fw_len, tp->fw_needed); + release_firmware(tp->fw); + tp->fw = NULL; + return -EINVAL; + } + + /* We no longer need firmware; we have it. */ + tp->fw_needed = NULL; + return 0; +} + static int tg3_open(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); int err; + if (tp->fw_needed) { + err = tg3_request_firmware(tp); + if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (err) + return err; + } else if (err) { + printk(KERN_WARNING "%s: TSO capability disabled.\n", + tp->dev->name); + tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; + } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { + printk(KERN_NOTICE "%s: TSO capability restored.\n", + tp->dev->name); + tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; + } + } + netif_carrier_off(tp->dev); err = tg3_set_power_state(tp, PCI_D0); @@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, struct net_device *dev; struct tg3 *tp; int err, pm_cap; - const char *fw_name = NULL; char str[40]; u64 dma_mask, persist_dma_mask; @@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_init_bufmgr_config(tp); if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) - fw_name = FIRMWARE_TG3; + tp->fw_needed = FIRMWARE_TG3; if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; @@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; } else { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG; - } - if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) - fw_name = FIRMWARE_TG3TSO5; + tp->fw_needed = FIRMWARE_TG3TSO5; else - fw_name = FIRMWARE_TG3TSO; - } - - if (fw_name) { - const __be32 *fw_data; - - err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev); - if (err) { - printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n", - fw_name); - goto err_out_iounmap; - } - - fw_data = (void *)tp->fw->data; - - /* Firmware blob starts with version numbers, followed by - start address and _full_ length including BSS sections - (which must be longer than the actual data, of course */ - - tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ - if (tp->fw_len < (tp->fw->size - 12)) { - printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n", - tp->fw_len, fw_name); - err = -EINVAL; - goto err_out_fw; - } + tp->fw_needed = FIRMWARE_TG3TSO; } /* TSO is on by default on chips that support hardware TSO. diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ae5da60..508def3 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2764,6 +2764,7 @@ struct tg3 { struct ethtool_coalesce coal; /* firmware info */ + const char *fw_needed; const struct firmware *fw; u32 fw_len; /* includes BSS */ }; -- cgit v0.10.2 From 8b9d3728977760f6bd1317c4420890f73695354e Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 19 Jan 2009 17:03:56 -0800 Subject: net: Fix data corruption when splicing from sockets. The trick in socket splicing where we try to convert the skb->data into a page based reference using virt_to_page() does not work so well. The idea is to pass the virt_to_page() reference via the pipe buffer, and refcount the buffer using a SKB reference. But if we are splicing from a socket to a socket (via sendpage) this doesn't work. The from side processing will grab the page (and SKB) references. The sendpage() calls will grab page references only, return, and then the from side processing completes and drops the SKB ref. The page based reference to skb->data is not enough to keep the kmalloc() buffer backing it from being reused. Yet, that is all that the socket send side has at this point. This leads to data corruption if the skb->data buffer is reused by SLAB before the send side socket actually gets the TX packet out to the device. The fix employed here is to simply allocate a page and copy the skb->data bytes into that page. This will hurt performance, but there is no clear way to fix this properly without a copy at the present time, and it is important to get rid of the data corruption. With fixes from Herbert Xu. Tested-by: Willy Tarreau Foreseen-by: Changli Gao Diagnosed-by: Willy Tarreau Reported-by: Willy Tarreau Fixed-by: Jens Axboe Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 65eac77..56272ac 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -73,17 +73,13 @@ static struct kmem_cache *skbuff_fclone_cache __read_mostly; static void sock_pipe_buf_release(struct pipe_inode_info *pipe, struct pipe_buffer *buf) { - struct sk_buff *skb = (struct sk_buff *) buf->private; - - kfree_skb(skb); + put_page(buf->page); } static void sock_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf) { - struct sk_buff *skb = (struct sk_buff *) buf->private; - - skb_get(skb); + get_page(buf->page); } static int sock_pipe_buf_steal(struct pipe_inode_info *pipe, @@ -1334,9 +1330,19 @@ fault: */ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) { - struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private; + put_page(spd->pages[i]); +} - kfree_skb(skb); +static inline struct page *linear_to_page(struct page *page, unsigned int len, + unsigned int offset) +{ + struct page *p = alloc_pages(GFP_KERNEL, 0); + + if (!p) + return NULL; + memcpy(page_address(p) + offset, page_address(page) + offset, len); + + return p; } /* @@ -1344,16 +1350,23 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int len, unsigned int offset, - struct sk_buff *skb) + struct sk_buff *skb, int linear) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; + if (linear) { + page = linear_to_page(page, len, offset); + if (!page) + return 1; + } else + get_page(page); + spd->pages[spd->nr_pages] = page; spd->partial[spd->nr_pages].len = len; spd->partial[spd->nr_pages].offset = offset; - spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb); spd->nr_pages++; + return 0; } @@ -1369,7 +1382,7 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd) + struct splice_pipe_desc *spd, int linear) { if (!*len) return 1; @@ -1392,7 +1405,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, flen, poff, skb)) + if (spd_fill_page(spd, page, flen, poff, skb, linear)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1419,7 +1432,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd)) + offset, len, skb, spd, 1)) return 1; /* @@ -1429,7 +1442,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd)) + offset, len, skb, spd, 0)) return 1; } @@ -1442,7 +1455,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, * the frag list, if such a thing exists. We'd probably need to recurse to * handle that cleanly. */ -int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, +int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct pipe_inode_info *pipe, unsigned int tlen, unsigned int flags) { @@ -1455,16 +1468,6 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; - struct sk_buff *skb; - - /* - * I'd love to avoid the clone here, but tcp_read_sock() - * ignores reference counts and unconditonally kills the sk_buff - * on return from the actor. - */ - skb = skb_clone(__skb, GFP_KERNEL); - if (unlikely(!skb)) - return -ENOMEM; /* * __skb_splice_bits() only fails if the output has no room left, @@ -1488,15 +1491,9 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, } done: - /* - * drop our reference to the clone, the pipe consumption will - * drop the rest. - */ - kfree_skb(skb); - if (spd.nr_pages) { + struct sock *sk = skb->sk; int ret; - struct sock *sk = __skb->sk; /* * Drop the socket lock, otherwise we have reverse -- cgit v0.10.2 From e0c6ef9388b58f297937fc9651331941d1579b25 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 19 Jan 2009 17:16:00 -0800 Subject: Revert "mv643xx_eth: use longer DMA bursts". This reverts commit cd4ccf76bfd2c36d351e68be7e6a597268f98a1a. On the Pegasos board, we can't do DMA burst that are longer than one cache line. For now, go back to using 32 byte DMA bursts for all mv643xx_eth platforms -- we can switch the ARM-based platforms back to doing long 128 byte bursts in the next development cycle. Signed-off-by: Lennert Buytenhek Reported-by: Alan Curry Reported-by: Gabriel Paubert Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 7253a49..e2aa468 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4"; /* * SDMA configuration register. */ +#define RX_BURST_SIZE_4_64BIT (2 << 1) #define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) +#define TX_BURST_SIZE_4_64BIT (2 << 22) #define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + TX_BURST_SIZE_4_64BIT) #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - BLM_RX_NO_SWAP | \ - BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + BLM_RX_NO_SWAP | \ + BLM_TX_NO_SWAP | \ + TX_BURST_SIZE_4_64BIT) #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -- cgit v0.10.2 From 2b448334a255d34401562229f467ffd95d8ed6ef Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 19 Jan 2009 17:17:18 -0800 Subject: mv643xx_eth: fix multicast filter programming Commit 66e63ffbc04706568d8789cbb00eaa8ddbcae648 ("mv643xx_eth: implement ->set_rx_mode()") cleaned up mv643xx_eth's multicast filter programming, but broke it as well. The non-special multicast filter table (for multicast addresses that are not of the form 01:00:5e:00:00:xx) consists of 256 hash table buckets organised as 64 32-bit words, where the 'accept' bits are in the LSB of each byte, so in bits 24 16 8 0 of each 32-bit word. The old code got this right, but the referenced commit broke this by using bits 3 2 1 0 instead. This commit fixes this up. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index e2aa468..8c6979a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1596,7 +1596,7 @@ oom: entry = addr_crc(a); } - table[entry >> 2] |= 1 << (entry & 3); + table[entry >> 2] |= 1 << (8 * (entry & 3)); } for (i = 0; i < 0x100; i += 4) { -- cgit v0.10.2 From fe65e704534de5d0661ebc3466a2b9018945f694 Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Mon, 19 Jan 2009 17:18:09 -0800 Subject: mv643xx_eth: prevent interrupt storm on ifconfig down Contrary to what the docs say, the 'extended interrupt cause' bit in the interrupt cause register (bit 1) appears to not be maskable on at least some of the mv643xx_eth platforms, making writing zeroes to the interrupt mask register but not the extended interrupt mask register insufficient to stop interrupts from occuring. Therefore, also write zeroes to the extended interrupt mask register when shutting down the port. This fixes the interrupt storm seen on the Pegasos board when shutting down the interface. Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8c6979a..5f31bbb 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2212,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev) struct mv643xx_eth_private *mp = netdev_priv(dev); int i; + wrlp(mp, INT_MASK_EXT, 0x00000000); wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); -- cgit v0.10.2 From f4895b8bc83a22a36446c4aee277e1750fcc6a18 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Mon, 19 Jan 2009 13:19:30 +0000 Subject: wimax/i2400m: error paths that need to free an skb should use kfree_skb() Roel Kluin reported a bug in two error paths where skbs were wrongly being freed using kfree(). He provided a fix where it was replaced to kfree_skb(), as it should be. However, in i2400mu_rx(), the error path was missing returning an indication of the failure. Changed to reset rx_skb to NULL and return it to the caller, i2400mu_rxd(). It will be treated as a transient error and just ignore the packet. Depending on the buffering conditions inside the device, the data packet might be dropped or the device will signal the host again for data-ready-to-read and the host will retry. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d3d37fe..15d9f51 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code) spin_lock_irqsave(&i2400m->rx_lock, flags); ack_skb = i2400m->ack_skb; if (ack_skb && !IS_ERR(ack_skb)) - kfree(ack_skb); + kfree_skb(ack_skb); i2400m->ack_skb = ERR_PTR(code); spin_unlock_irqrestore(&i2400m->rx_lock, flags); } diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index 074cc1f..a314799 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu) * NOTE: this function might realloc the skb (if it is too small), * so always update with the one returned. * ERR_PTR() is < 0 on error. + * Will return NULL if it cannot reallocate -- this can be + * considered a transient retryable error. */ static struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb) @@ -243,8 +245,8 @@ retry: if (printk_ratelimit()) dev_err(dev, "RX: Can't reallocate skb to %d; " "RX dropped\n", rx_size); - kfree(rx_skb); - result = 0; + kfree_skb(rx_skb); + rx_skb = NULL; goto out; /* drop it...*/ } kfree_skb(rx_skb); @@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu) if (IS_ERR(rx_skb)) goto out; atomic_dec(&i2400mu->rx_pending_count); - if (rx_skb->len == 0) { /* some ignorable condition */ + if (rx_skb == NULL || rx_skb->len == 0) { + /* some "ignorable" condition */ kfree_skb(rx_skb); continue; } -- cgit v0.10.2 From 67605d6812691bbd2158d2f60259e0407611bc1b Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 19 Jan 2009 20:21:49 -0800 Subject: [CVE-2009-0029] sparc: Enable syscall wrappers for 64-bit sparc64 needs sign-extended function parameters. We have to enable the system call wrappers. Signed-off-by: Christian Borntraeger Signed-off-by: David S. Miller diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index de58c02..c3ea215 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -36,6 +36,7 @@ config SPARC64 select HAVE_KRETPROBES select HAVE_KPROBES select HAVE_LMB + select HAVE_SYSCALL_WRAPPERS select USE_GENERIC_SMP_HELPERS if SMP select RTC_DRV_CMOS select RTC_DRV_BQ4802 -- cgit v0.10.2 From e42650196df34789c825fa83f8bb37a5d5e52c14 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 19 Jan 2009 21:11:27 -0800 Subject: sparc64: Annotate sparc64 specific syscalls with SYSCALL_DEFINEx() Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 09058fc..e2d1024 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -399,7 +399,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } } -asmlinkage unsigned long sparc_brk(unsigned long brk) +SYSCALL_DEFINE1(sparc_brk, unsigned long, brk) { /* People could try to be nasty and use ta 0x6d in 32bit programs */ if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32) @@ -415,7 +415,7 @@ asmlinkage unsigned long sparc_brk(unsigned long brk) * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. */ -asmlinkage long sparc_pipe(struct pt_regs *regs) +SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs) { int fd[2]; int error; @@ -435,8 +435,8 @@ out: * This is really horribly ugly. */ -asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, - unsigned long third, void __user *ptr, long fifth) +SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second, + unsigned long, third, void __user *, ptr, long, fifth) { long err; @@ -519,7 +519,7 @@ out: return err; } -asmlinkage long sparc64_newuname(struct new_utsname __user *name) +SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name) { int ret = sys_newuname(name); @@ -530,7 +530,7 @@ asmlinkage long sparc64_newuname(struct new_utsname __user *name) return ret; } -asmlinkage long sparc64_personality(unsigned long personality) +SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; @@ -564,9 +564,9 @@ int sparc_mmap_check(unsigned long addr, unsigned long len) } /* Linux version of mmap */ -asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long off) +SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, off) { struct file * file = NULL; unsigned long retval = -EBADF; @@ -589,7 +589,7 @@ out: return retval; } -asmlinkage long sys64_munmap(unsigned long addr, size_t len) +SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) { long ret; @@ -606,9 +606,9 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags, unsigned long new_addr); -asmlinkage unsigned long sys64_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr) +SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len, + unsigned long, new_len, unsigned long, flags, + unsigned long, new_addr) { unsigned long ret = -EINVAL; @@ -671,7 +671,7 @@ asmlinkage void sparc_breakpoint(struct pt_regs *regs) extern void check_pending(int signum); -asmlinkage long sys_getdomainname(char __user *name, int len) +SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len) { int nlen, err; @@ -694,11 +694,10 @@ out: return err; } -asmlinkage long sys_utrap_install(utrap_entry_t type, - utrap_handler_t new_p, - utrap_handler_t new_d, - utrap_handler_t __user *old_p, - utrap_handler_t __user *old_d) +SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type, + utrap_handler_t, new_p, utrap_handler_t, new_d, + utrap_handler_t __user *, old_p, + utrap_handler_t __user *, old_d) { if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31) return -EINVAL; @@ -764,11 +763,9 @@ asmlinkage long sparc_memory_ordering(unsigned long model, return 0; } -asmlinkage long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, - void __user *restorer, - size_t sigsetsize) +SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact, void __user *, restorer, + size_t, sigsetsize) { struct k_sigaction new_ka, old_ka; int ret; @@ -808,7 +805,8 @@ asmlinkage void update_perfctrs(void) reset_pic(); } -asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2) +SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0, + unsigned long, arg1, unsigned long, arg2) { int err = 0; diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S index 87f5a3b..d150c2a 100644 --- a/arch/sparc/kernel/syscalls.S +++ b/arch/sparc/kernel/syscalls.S @@ -21,7 +21,7 @@ execve_merge: .align 32 sys_sparc_pipe: - ba,pt %xcc, sparc_pipe + ba,pt %xcc, sys_sparc_pipe_real add %sp, PTREGS_OFF, %o0 sys_nis_syscall: ba,pt %xcc, c_sys_nis_syscall diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h index bc9f5da..15c2d752 100644 --- a/arch/sparc/kernel/systbls.h +++ b/arch/sparc/kernel/systbls.h @@ -16,9 +16,6 @@ extern asmlinkage long sys_ipc(unsigned int call, int first, void __user *ptr, long fifth); extern asmlinkage long sparc64_newuname(struct new_utsname __user *name); extern asmlinkage long sparc64_personality(unsigned long personality); -extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off); extern asmlinkage long sys64_munmap(unsigned long addr, size_t len); extern asmlinkage unsigned long sys64_mremap(unsigned long addr, unsigned long old_len, diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index e6007bb3..f93c42a 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -21,7 +21,7 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link /*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek +/*15*/ .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice @@ -55,8 +55,8 @@ sys_call_table32: /*170*/ .word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents .word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall - .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname -/*190*/ .word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl + .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname +/*190*/ .word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl .word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 @@ -95,7 +95,7 @@ sys_call_table: /*0*/ .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write /*5*/ .word sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod -/*15*/ .word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek +/*15*/ .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid /*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall /*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice @@ -106,7 +106,7 @@ sys_call_table: .word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve /*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize .word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall -/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect +/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect .word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups /*80*/ .word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall .word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall @@ -129,8 +129,8 @@ sys_call_table: /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents .word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall - .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname -/*190*/ .word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl + .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname +/*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall .word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64 @@ -142,7 +142,7 @@ sys_call_table: .word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler .word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl .word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy -- cgit v0.10.2 From fcd26f7ae2ea5889134e8b3d60a42ce8b993c95f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 19 Jan 2009 22:44:04 -0800 Subject: sparc64: Fix DAX handling via userspace access from kernel. If we do a userspace access from kernel mode, and get a data access exception, we need to check the exception table just like a normal fault does. The spitfire DAX handler was doing this, but such logic was missing from the sun4v DAX code. Reported-by: Dennis Gilmore Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c index c2d153d..d809c4e 100644 --- a/arch/sparc/kernel/traps_64.c +++ b/arch/sparc/kernel/traps_64.c @@ -1,6 +1,6 @@ /* arch/sparc64/kernel/traps.c * - * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net) + * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net) * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com) */ @@ -314,6 +314,21 @@ void sun4v_data_access_exception(struct pt_regs *regs, unsigned long addr, unsig return; if (regs->tstate & TSTATE_PRIV) { + /* Test if this comes from uaccess places. */ + const struct exception_table_entry *entry; + + entry = search_exception_tables(regs->tpc); + if (entry) { + /* Ouch, somebody is trying VM hole tricks on us... */ +#ifdef DEBUG_EXCEPTIONS + printk("Exception: PC<%016lx> faddr\n", regs->tpc); + printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n", + regs->tpc, entry->fixup); +#endif + regs->tpc = entry->fixup; + regs->tnpc = regs->tpc + 4; + return; + } printk("sun4v_data_access_exception: ADDR[%016lx] " "CTX[%04x] TYPE[%04x], going.\n", addr, ctx, type); -- cgit v0.10.2 From a50412e3f8ce95d7ed558370d7dde5171fd04283 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 6 Jan 2009 19:54:02 +0200 Subject: UBIFS: do not treat all data as short term UBIFS wrongly tells UBI that all data is short term. Use proper hints instead. Thanks to Xiaochuan-Xu for noticing this. Signed-off-by: Artem Bityutskiy diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index 9b7c54e..a11ca09 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -208,7 +208,7 @@ again: offs = 0; out: - err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, UBI_SHORTTERM); + err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, wbuf->dtype); if (err) goto out_unlock; -- cgit v0.10.2 From 7078202e55b565582fcbd831a8dd3069bdc72610 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 19 Jan 2009 19:57:27 +0200 Subject: UBIFS: document dark_wm and dead_wm better Just add more commentaries. Also some commentary fixes for lprops flags. Signed-off-by: Artem Bityutskiy diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index 9832f9a..b2e5f11 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -31,6 +31,26 @@ * to be reused. Garbage collection will cause the number of dirty index nodes * to grow, however sufficient space is reserved for the index to ensure the * commit will never run out of space. + * + * Notes about dead watermark. At current UBIFS implementation we assume that + * LEBs which have less than @c->dead_wm bytes of free + dirty space are full + * and not worth garbage-collecting. The dead watermark is one min. I/O unit + * size, or min. UBIFS node size, depending on what is greater. Indeed, UBIFS + * Garbage Collector has to synchronize the GC head's write buffer before + * returning, so this is about wasting one min. I/O unit. However, UBIFS GC can + * actually reclaim even very small pieces of dirty space by garbage collecting + * enough dirty LEBs, but we do not bother doing this at this implementation. + * + * Notes about dark watermark. The results of GC work depends on how big are + * the UBIFS nodes GC deals with. Large nodes make GC waste more space. Indeed, + * if GC move data from LEB A to LEB B and nodes in LEB A are large, GC would + * have to waste large pieces of free space at the end of LEB B, because nodes + * from LEB A would not fit. And the worst situation is when all nodes are of + * maximum size. So dark watermark is the amount of free + dirty space in LEB + * which are guaranteed to be reclaimable. If LEB has less space, the GC migh + * be unable to reclaim it. So, LEBs with free + dirty greater than dark + * watermark are "good" LEBs from GC's point of few. The other LEBs are not so + * good, and GC takes extra care when moving them. */ #include diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 53811e5..da99da0 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -573,15 +573,8 @@ static int init_constants_early(struct ubifs_info *c) c->ranges[UBIFS_IDX_NODE].max_len = INT_MAX; /* - * Initialize dead and dark LEB space watermarks. - * - * Dead space is the space which cannot be used. Its watermark is - * equivalent to min. I/O unit or minimum node size if it is greater - * then min. I/O unit. - * - * Dark space is the space which might be used, or might not, depending - * on which node should be written to the LEB. Its watermark is - * equivalent to maximum UBIFS node size. + * Initialize dead and dark LEB space watermarks. See gc.c for comments + * about these values. */ c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size); c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size); diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 0881897..2e78d6a 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -426,9 +426,9 @@ struct ubifs_unclean_leb { * LEB properties flags. * * LPROPS_UNCAT: not categorized - * LPROPS_DIRTY: dirty > 0, not index + * LPROPS_DIRTY: dirty > free, dirty >= @c->dead_wm, not index * LPROPS_DIRTY_IDX: dirty + free > @c->min_idx_node_sze and index - * LPROPS_FREE: free > 0, not empty, not index + * LPROPS_FREE: free > 0, dirty < @c->dead_wm, not empty, not index * LPROPS_HEAP_CNT: number of heaps used for storing categorized LEBs * LPROPS_EMPTY: LEB is empty, not taken * LPROPS_FREEABLE: free + dirty == leb_size, not index, not taken -- cgit v0.10.2 From 082605de5f82eb692cc90f7fda071cc01bb5ac34 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 19 Jan 2009 14:32:51 -0500 Subject: ring-buffer: fix alignment problem Impact: fix to allow some archs to use the ring buffer Commits in the ring buffer are checked by pointer arithmetic. If the calculation is incorrect, then the commits will never take place and the buffer will simply fill up and report an error. Each page in the ring buffer has a small header: struct buffer_data_page { u64 time_stamp; local_t commit; unsigned char data[]; }; Unfortuntely, some of the calculations used sizeof(struct buffer_data_page) to know the size of the header. But this is incorrect on some archs, where sizeof(struct buffer_data_page) does not equal offsetof(struct buffer_data_page, data), and on those archs, the commits are never processed. This patch replaces the sizeof with offsetof. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 8b0daf0..1d65263 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -246,7 +246,7 @@ static inline int test_time_stamp(u64 delta) return 0; } -#define BUF_PAGE_SIZE (PAGE_SIZE - sizeof(struct buffer_data_page)) +#define BUF_PAGE_SIZE (PAGE_SIZE - offsetof(struct buffer_data_page, data)) /* * head_page == tail_page && head == tail then buffer is empty. -- cgit v0.10.2 From 94ce1c585ed51dd9e72e812117e11f3f236a5399 Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Thu, 18 Dec 2008 12:34:05 +0000 Subject: powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller device tree nodes for AMCC PowerPC 405EX[r]-based boards to facilitate binding with the new "ibm,sdram-4xx-ddr2" EDAC memory controller adapter driver. Signed-off-by: Grant Erickson Acked-by: Stefan Roese Signed-off-by: Josh Boyer diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 513bc43..5b2a494 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -89,8 +89,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405exr"; + compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ }; MAL0: mcmal { diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index dececc4..2804444 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -90,8 +90,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex"; + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ }; MAL0: mcmal { diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 945508c..ffc246e 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -90,8 +90,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex"; + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4 /* ECC SEC Error */ >; }; MAL0: mcmal { -- cgit v0.10.2 From e275e023aa69bdc6a2f43b86ca3aa93a22e47837 Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Fri, 9 Jan 2009 18:20:11 +0000 Subject: powerpc/44x: Warp patches for the new NDFC driver Convert the Warp platform to use the newly merged NDFC driver - warp.dts changed to work with ndfc - warp-nand.c no longer needed - removed obsolete rev A support from cuboot-warp.c Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index 2178021..806df69 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -18,57 +18,14 @@ static bd_t bd; -static void warp_fixup_one_nor(u32 from, u32 to) -{ - void *devp; - char name[50]; - u32 v[2]; - - sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from); - - devp = finddevice(name); - if (!devp) - return; - - if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { - v[0] = to; - setprop(devp, "reg", v, sizeof(v)); - - printf("NOR 64M fixup %x -> %x\r\n", from, to); - } -} - - static void warp_fixups(void) { ibm440ep_fixup_clocks(66000000, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - - /* Fixup for 64M flash on Rev A boards. */ - if (bd.bi_flashsize == 0x4000000) { - void *devp; - u32 v[3]; - - devp = finddevice("/plb/opb/ebc/nor_flash@0,0"); - if (!devp) - return; - - /* Fixup the size */ - if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { - v[2] = bd.bi_flashsize; - setprop(devp, "reg", v, sizeof(v)); - } - - /* Fixup parition offsets */ - warp_fixup_one_nor(0x300000, 0x3f00000); - warp_fixup_one_nor(0x340000, 0x3f40000); - warp_fixup_one_nor(0x380000, 0x3f80000); - } } - void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index f4e4ba6..7e183ff 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -149,12 +149,17 @@ reg = <0x00000002 0x00004000 0x00000A00>; }; - nor_flash@0,0 { + nor@0,0 { compatible = "amd,s29gl032a", "cfi-flash"; bank-width = <2>; reg = <0x00000000 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; + + partition@0 { + label = "splash"; + reg = <0x00000000 0x00020000>; + }; partition@300000 { label = "fpga"; reg = <0x0300000 0x00040000>; @@ -168,6 +173,41 @@ reg = <0x0380000 0x00080000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x03E00000>; + }; + partition@40000000 { + label = "persistent"; + reg = <0x04000000 0x04000000>; + }; + partition@80000000 { + label = "persistent1"; + reg = <0x08000000 0x04000000>; + }; + partition@C0000000 { + label = "persistent2"; + reg = <0x0C000000 0x04000000>; + }; + }; + }; }; UART0: serial@ef600300 { diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 6981331..01f51da 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -3,5 +3,4 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o -obj-$(CONFIG_WARP) += warp-nand.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c deleted file mode 100644 index 89ecd76..0000000 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * PIKA Warp(tm) NAND flash specific routines - * - * Copyright (c) 2008 PIKA Technologies - * Sean MacLennan - */ - -#include -#include -#include -#include -#include -#include -#include -#include - - -#ifdef CONFIG_MTD_NAND_NDFC - -#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */ - -#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL -#define WARP_NAND_FLASH_REG_SIZE 0x2000 - -static struct resource warp_ndfc = { - .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct mtd_partition nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = 0x0200000 - }, - { - .name = "root", - .offset = 0x0200000, - .size = 0x3E00000 - }, - { - .name = "persistent", - .offset = 0x4000000, - .size = 0x4000000 - }, - { - .name = "persistent1", - .offset = 0x8000000, - .size = 0x4000000 - }, - { - .name = "persistent2", - .offset = 0xC000000, - .size = 0x4000000 - } -}; - -struct ndfc_controller_settings warp_ndfc_settings = { - .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1), - .ndfc_erpn = 0, -}; - -static struct ndfc_chip_settings warp_chip0_settings = { - .bank_settings = 0x80002222, -}; - -struct platform_nand_ctrl warp_nand_ctrl = { - .priv = &warp_ndfc_settings, -}; - -static struct platform_device warp_ndfc_device = { - .name = "ndfc-nand", - .id = 0, - .dev = { - .platform_data = &warp_nand_ctrl, - }, - .num_resources = 1, - .resource = &warp_ndfc, -}; - -/* Do NOT set the ecclayout: let it default so it is correct for both - * 64M and 256M flash chips. - */ -static struct platform_nand_chip warp_nand_chip0 = { - .nr_chips = 1, - .chip_offset = CS_NAND_0, - .nr_partitions = ARRAY_SIZE(nand_parts), - .partitions = nand_parts, - .chip_delay = 20, - .priv = &warp_chip0_settings, -}; - -static struct platform_device warp_nand_device = { - .name = "ndfc-chip", - .id = 0, - .num_resources = 0, - .dev = { - .platform_data = &warp_nand_chip0, - .parent = &warp_ndfc_device.dev, - } -}; - -static int warp_setup_nand_flash(void) -{ - struct device_node *np; - - /* Try to detect a rev A based on NOR size. */ - np = of_find_compatible_node(NULL, NULL, "cfi-flash"); - if (np) { - struct property *pp; - - pp = of_find_property(np, "reg", NULL); - if (pp && (pp->length == 12)) { - u32 *v = pp->value; - if (v[2] == 0x4000000) { - /* Rev A = 64M NAND */ - warp_nand_chip0.nr_partitions = 3; - - nand_parts[1].size = 0x3000000; - nand_parts[2].offset = 0x3200000; - nand_parts[2].size = 0x0e00000; - } - } - of_node_put(np); - } - - platform_device_register(&warp_ndfc_device); - platform_device_register(&warp_nand_device); - - return 0; -} -machine_device_initcall(warp, warp_setup_nand_flash); - -#endif -- cgit v0.10.2 From e7f07968c16bdd9480001c0a9de013ba56889cf9 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 20 Jan 2009 09:50:19 -0500 Subject: ext4: Fix ext4_free_blocks() w/o a journal when files have indirect blocks When trying to unlink a file with indirect blocks on a filesystem without a journal, the "circular indirect block" sanity test was getting falsely triggered. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 49484ba..b4386da 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3622,7 +3622,7 @@ static void ext4_free_data(handle_t *handle, struct inode *inode, * block pointed to itself, it would have been detached when * the block was cleared. Check for this instead of OOPSing. */ - if (bh2jh(this_bh)) + if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) ext4_handle_dirty_metadata(handle, inode, this_bh); else ext4_error(inode->i_sb, __func__, -- cgit v0.10.2 From 6e11521506e592aed2eba90166e20796c0695023 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 20 Jan 2009 09:57:24 -0600 Subject: powerpc/85xx: Fix typo in mpc8572ds dts The localbus node flash had a minor typo for a read-only property. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 3dcc001..359c3b7 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -89,7 +89,7 @@ ramdisk@0 { reg = <0x0 0x03000000>; - readl-only; + read-only; }; diagnostic@3000000 { -- cgit v0.10.2 From 8c4c19f1367435afdc16ac122a2a95a4d6cff9f0 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 17:48:02 +0200 Subject: UBI: remove unused variable Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768..09a326e 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -380,7 +380,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +427,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; -- cgit v0.10.2 From 36b477d005fbda29e7581c3cef7ee31a59d8970b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 20 Jan 2009 18:04:09 +0200 Subject: UBI: fix resource de-allocation GregKH asked to fix UBI which has fake device release method. Indeed, we have to free UBI device description object from the release method, because otherwise we'll oops is someone opens a UBI device sysfs file, then the device is removed, and he reads the file. With this fix, he will get -ENODEV instead of an oops. Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 09a326e..4048db8 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -944,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -955,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } -- cgit v0.10.2 From 66f9a2590aa87dc77cddaeaf46177de76edd2339 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 20 Jan 2009 09:49:51 -0800 Subject: Revert "xfrm: For 32/64 compatability wrt. xfrm_usersa_info" This reverts commit fc8c7dc1b29560c016a67a34ccff32a712b5aa86. As indicated by Jiri Klimes, this won't work. These numbers are not only used the size validation, they are also used to locate attributes sitting after the message. Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 7877e79..b95a2d6 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1914,17 +1914,10 @@ static int xfrm_send_migrate(struct xfrm_selector *sel, u8 dir, u8 type, } #endif -/* For the xfrm_usersa_info cases we have to work around some 32-bit vs. - * 64-bit compatability issues. On 32-bit the structure is 220 bytes, but - * for 64-bit it gets padded out to 224 bytes. Those bytes are just - * padding and don't have any content we care about. Therefore as long - * as we have enough bytes for the content we can make both cases work. - */ - #define XMSGSIZE(type) sizeof(struct type) static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = { - [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = 220, /* see above */ + [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info), [XFRM_MSG_DELSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id), [XFRM_MSG_GETSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id), [XFRM_MSG_NEWPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info), @@ -1934,7 +1927,7 @@ static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = { [XFRM_MSG_ACQUIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire), [XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire), [XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info), - [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = 220, /* see above */ + [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info), [XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire), [XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush), [XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0, -- cgit v0.10.2 From e801c72d61173dff2bbbaa164d43d84b993c6ddb Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 20 Jan 2009 13:01:54 -0500 Subject: powerpc/40x: Update PowerPC 40x defconfigs Update the 40x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 25572cc..a32ec8d 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:18 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:46 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -182,6 +184,7 @@ CONFIG_405EZ=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index b80ba7a..4e9d85f 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:20 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:48 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -184,6 +186,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -207,6 +210,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -221,12 +225,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,6 +256,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -361,6 +371,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -433,6 +444,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -464,6 +481,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,6 +564,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -570,6 +589,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -629,9 +652,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -650,11 +676,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -664,7 +690,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -723,6 +749,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -748,11 +775,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -791,6 +818,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -816,7 +847,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -850,10 +883,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -863,6 +893,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -903,6 +934,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -953,6 +985,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -961,18 +994,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -999,11 +1038,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index 45dcb82..8c019d7 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:22 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:50 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -182,6 +184,7 @@ CONFIG_405GPR=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -461,6 +478,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -543,6 +561,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -565,6 +584,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -617,9 +640,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -639,11 +665,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -653,7 +679,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -712,7 +738,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -746,10 +774,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -759,6 +784,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -799,6 +825,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -849,6 +876,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -857,18 +885,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -895,11 +929,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index e2f3695..9917a09 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:23 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:52 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -182,6 +184,7 @@ CONFIG_405EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 413c778..58bf2ac 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:25 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:53 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -182,6 +184,7 @@ CONFIG_405EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig index 9a9350d..b688838 100644 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Fri Nov 14 10:49:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:55 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -41,7 +42,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,8 +75,8 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +114,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +124,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +131,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +150,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -188,6 +189,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,13 +207,13 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -226,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,6 +285,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -423,6 +430,7 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -438,8 +446,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -574,6 +583,10 @@ CONFIG_NETDEV_1000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -674,9 +687,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -854,7 +870,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -870,6 +885,7 @@ CONFIG_EXT2_FS=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -906,10 +922,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -918,6 +931,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -997,6 +1011,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1046,6 +1061,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1055,6 +1071,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1064,11 +1082,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1094,6 +1114,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 5820e0a..5ab29dd 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:27 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:57 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -185,6 +187,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -208,6 +211,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -251,6 +257,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,6 +282,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -337,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -362,6 +372,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -434,6 +445,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -464,6 +481,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,6 +564,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -568,6 +587,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -620,9 +643,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -641,11 +667,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -655,7 +681,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -701,9 +727,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -729,7 +759,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -763,10 +795,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -776,6 +805,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -816,6 +846,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -866,6 +897,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -874,18 +906,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -912,11 +950,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -- cgit v0.10.2 From a5c7f4710fba334bf613d705f97b4471b36446f8 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 19 Mar 2008 22:02:40 +0100 Subject: firewire: insist on successive self ID complete events The whole topology code only works if the old and new topologies which are compared come from immediately successive self ID complete events. If there happened bus resets without self ID complete events in the meantime, or self ID complete events with invalid selfIDs, the topology comparison could identify nodes wrongly, or more likely just corrupt kernel memory or panic right away. We now discard all nodes of the old topology and treat all current nodes as new ones if the current self ID generation is not the previous one plus 1. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6..e7520e4 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; -- cgit v0.10.2 From 8cd0bbbdff7471163cc6a058be8b8610ddd01d6b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 24 Mar 2008 20:56:40 +0100 Subject: firewire: unnecessary BM delay after generation rollover Noticed by Jarod Wilson: The bus manager work was unnecessarily delayed each time the bus generation counter rolled over. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a1..17a80ce 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index e7520e4..8dd6703 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -523,7 +523,7 @@ fw_core_handle_bus_reset(struct fw_card *card, * previously processed one, we cannot reliably compare the * old and new topologies. */ - if ((generation & 0xff) != ((card->generation + 1) & 0xff) && + if (!is_next_generation(generation, card->generation) && card->local_node != NULL) { fw_notify("skipped bus generations, destroying all nodes\n"); fw_destroy_nodes(card); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a..1d78e9c 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); /* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + +/* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an * indirect payload part that is pointer to by the 'payload' field. -- cgit v0.10.2 From 3d36a0df3b473fb53531484df227f2da8bc7494b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Jan 2009 22:45:54 +0100 Subject: firewire: keep highlevel drivers attached during brief connection loss There are situations when nodes vanish from the bus and come back quickly thereafter: - When certain bus-powered hubs are plugged in, - when certain devices are plugged into 6-port hubs, - when certain disk enclosures are switched from self-power to bus power or vice versa and break the daisy chain during the transition, - when the user plugs a cable out and quickly plugs it back in, e.g. to reorder a daisy chain (works on Mac OS X if done quickly enough), - when certain hubs temporarily malfunction during high bus traffic. Until now, firewire-core reported affected nodes as lost to the highlevel drivers (firewire-sbp2 and userspace drivers). We now delay the destruction of device representations until after at least two seconds after the last bus reset. If a "new" device is detected in this period whose bus information block and root directory header match that of a device which is pending for deletion, we resurrect that device and send update calls to highlevel drivers. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d..0925d91 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -634,12 +635,38 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +674,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +682,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +762,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +809,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +923,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +955,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +966,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1072,9 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732..8ef6ec2 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; -- cgit v0.10.2 From 8a9dee59a345f96757dd45699de1c4182d8bf9a9 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 19 Jan 2009 17:14:24 -0600 Subject: ASoC: fix registration of the SoC card in the Freescale MPC8610 drivers The Freescale MPC8610 driver was defining two SOC card (snd_soc_card) structures, partially initializing each one, but registering only one of them with ASoC. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index bcec3f6..acf39a6 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -183,16 +183,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = { }; /** - * mpc8610_hpcd_machine: ASoC machine data - */ -static struct snd_soc_card mpc8610_hpcd_machine = { - .probe = mpc8610_hpcd_machine_probe, - .remove = mpc8610_hpcd_machine_remove, - .name = "MPC8610 HPCD", - .num_links = 1, -}; - -/** * mpc8610_hpcd_probe: OF probe function for the fabric driver * * This function gets called when an SSI node is found in the device tree. @@ -455,7 +445,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */ machine_data->dai.ops = &mpc8610_hpcd_ops; - mpc8610_hpcd_machine.dai_link = &machine_data->dai; + machine_data->machine.probe = mpc8610_hpcd_machine_probe; + machine_data->machine.remove = mpc8610_hpcd_machine_remove; + machine_data->machine.name = "MPC8610 HPCD"; + machine_data->machine.num_links = 1; + machine_data->machine.dai_link = &machine_data->dai; /* Allocate a new audio platform device structure */ sound_device = platform_device_alloc("soc-audio", -1); @@ -465,7 +459,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, goto error; } - machine_data->sound_devdata.card = &mpc8610_hpcd_machine; + machine_data->sound_devdata.card = &machine_data->machine; machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270; machine_data->machine.platform = &fsl_soc_platform; -- cgit v0.10.2 From 357f5b0b91054ae23385ea4b0634bb8b43736e83 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 17 Jan 2009 06:47:12 +0000 Subject: NET: net_namespace, fix lock imbalance register_pernet_gen_subsys omits mutex_unlock in one fail path. Fix it. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 55cffad..55151fa 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -341,8 +341,8 @@ again: rv = register_pernet_operations(first_device, ops); if (rv < 0) ida_remove(&net_generic_ids, *id); - mutex_unlock(&net_mutex); out: + mutex_unlock(&net_mutex); return rv; } EXPORT_SYMBOL_GPL(register_pernet_gen_subsys); -- cgit v0.10.2 From e3fd553468738e0342cbd82a63ede00c983a0eb4 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Sat, 17 Jan 2009 08:27:19 +0000 Subject: myri10ge: don't forget pci_disable_device() Don't forget to call pci_disable_device() in myri10ge_remove() and when myri10ge_probe() fails. By the way, update the copyright years. Signed-off-by: Brice Goglin Signed-off-by: David S. Miller diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6bb71b6..e9c1296 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1,7 +1,7 @@ /************************************************************************* * myri10ge.c: Myricom Myri-10G Ethernet driver. * - * Copyright (C) 2005 - 2007 Myricom, Inc. + * Copyright (C) 2005 - 2009 Myricom, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.4-1.398" +#define MYRI10GE_VERSION_STR "1.4.4-1.401" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (status != 0) { dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } pci_set_master(pdev); @@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } if (status != 0) { dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) - goto abort_with_netdev; + goto abort_with_enabled; mgp->board_span = pci_resource_len(pdev, 0); mgp->iomem_base = pci_resource_start(pdev, 0); @@ -3943,8 +3943,10 @@ abort_with_mtrr: dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus); -abort_with_netdev: +abort_with_enabled: + pci_disable_device(pdev); +abort_with_netdev: free_netdev(netdev); return status; } @@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev) mgp->cmd, mgp->cmd_bus); free_netdev(netdev); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } -- cgit v0.10.2 From 0d1cfd20cc5f785d5345d249d4b6a6f84b29e6a6 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 17 Jan 2009 11:14:31 +0000 Subject: via-velocity: fix hot spin while(--j >= 0) keeps spinning when j is unsigned: Signed-off-by: Roel Kluin Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index a75f91d..c5691fd 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) static int velocity_init_td_ring(struct velocity_info *vptr) { dma_addr_t curr; - unsigned int j; + int j; /* Init the TD ring entries */ for (j = 0; j < vptr->tx.numq; j++) { -- cgit v0.10.2 From ebad18e93fbc6bc63ee734edbc0eb38ac6b919c0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 17 Jan 2009 19:46:16 +0000 Subject: gro: Fix handling of complete checksums in IPv6 We need to perform skb_postpull_rcsum after pulling the IPv6 header in order to maintain the correctness of the complete checksum. This patch also adds a missing iph reload after pulling. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 94f74f5..c802bc1 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -797,6 +797,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, unsigned int nlen; int flush = 1; int proto; + __wsum csum; if (unlikely(!pskb_may_pull(skb, sizeof(*iph)))) goto out; @@ -808,6 +809,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, rcu_read_lock(); proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr); + iph = ipv6_hdr(skb); IPV6_GRO_CB(skb)->proto = proto; ops = rcu_dereference(inet6_protos[proto]); if (!ops || !ops->gro_receive) @@ -839,8 +841,13 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, NAPI_GRO_CB(skb)->flush |= flush; + csum = skb->csum; + skb_postpull_rcsum(skb, iph, skb_network_header_len(skb)); + pp = ops->gro_receive(head, skb); + skb->csum = csum; + out_unlock: rcu_read_unlock(); -- cgit v0.10.2 From 9a8e47ffd95608f0768e1a8a0225c822aa53aa9b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 17 Jan 2009 19:47:18 +0000 Subject: gro: Fix error handling on extremely short frags When a frag is shorter than an Ethernet header, we'd return a zeroed packet instead of aborting. This patch fixes that. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 6e44c32..5379b0c 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2536,6 +2536,7 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi, if (!pskb_may_pull(skb, ETH_HLEN)) { napi_reuse_skb(napi, skb); + skb = NULL; goto out; } -- cgit v0.10.2 From 37fe4732b978eb02e5433387a40f2b61706cebe3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 17 Jan 2009 19:48:13 +0000 Subject: gro: Fix merging of paged packets The previous fix to paged packets broke the merging because it reset the skb->len before we added it to the merged packet. This wasn't detected because it simply resulted in the truncation of the packet while the missing bit is subsequently retransmitted. The fix is to store skb->len before we clobber it. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 56272ac..2e5f2ca 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2585,8 +2585,9 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) struct sk_buff *nskb; unsigned int headroom; unsigned int hlen = p->data - skb_mac_header(p); + unsigned int len = skb->len; - if (hlen + p->len + skb->len >= 65536) + if (hlen + p->len + len >= 65536) return -E2BIG; if (skb_shinfo(p)->frag_list) @@ -2648,9 +2649,9 @@ merge: done: NAPI_GRO_CB(p)->count++; - p->data_len += skb->len; - p->truesize += skb->len; - p->len += skb->len; + p->data_len += len; + p->truesize += len; + p->len += len; NAPI_GRO_CB(skb)->same_flow = 1; return 0; -- cgit v0.10.2 From 65557f350749e11d51d15dee759d6e04f290e256 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Tue, 20 Jan 2009 16:50:25 -0500 Subject: ALSA: hda: 83xxx port 0xe DAC selection On the 92hd8xxx codecs port 0xe needs the connection selected to be the last DAC in the list. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a4d4afe..3b97d1e 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -841,10 +841,6 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = { }; static struct hda_verb stac92hd83xxx_core_init[] = { - /* start of config #1 */ - { 0xe, AC_VERB_SET_CONNECT_SEL, 0x3}, - - /* start of config #2 */ { 0xa, AC_VERB_SET_CONNECT_SEL, 0x0}, { 0xb, AC_VERB_SET_CONNECT_SEL, 0x0}, { 0xd, AC_VERB_SET_CONNECT_SEL, 0x1}, @@ -4754,7 +4750,9 @@ static struct hda_input_mux stac92hd83xxx_dmux = { static int patch_stac92hd83xxx(struct hda_codec *codec) { struct sigmatel_spec *spec; + hda_nid_t conn[STAC92HD83_DAC_COUNT + 1]; int err; + int num_dacs; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4773,13 +4771,21 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids; + + /* set port 0xe to select the last DAC + */ + num_dacs = snd_hda_get_connections(codec, 0x0e, + conn, STAC92HD83_DAC_COUNT + 1) - 1; + + snd_hda_codec_write_cache(codec, 0xe, 0, + AC_VERB_SET_CONNECT_SEL, num_dacs); + spec->init = stac92hd83xxx_core_init; switch (codec->vendor_id) { case 0x111d7605: break; default: spec->num_pwrs--; - spec->init++; /* switch to config #2 */ } spec->mixer = stac92hd83xxx_mixer; -- cgit v0.10.2 From 7143f7a1a3603002e4ef3719fa92e8dd6e607099 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 9 Jan 2009 22:27:42 -0800 Subject: driver core: Convert '/' to '!' in dev_set_name() Commit 3ada8b7e ("block: struct device - replace bus_id with dev_name(), dev_set_name()") deleted the code in register_disk() that changed a '/' to a '!' in the device name when registering a disk, but dev_set_name() does not perform this conversion. This leads to amusing problems with disks that have '/' in their names: for example a failure to boot with the root partition on a cciss device, even though the kernel says it knows about the root device: VFS: Cannot open root device "cciss/c0d0p6" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 6800 71652960 cciss/c0d0 driver: cciss 6802 1 cciss/c0d0p2 6805 2931831 cciss/c0d0p5 6806 34354908 cciss/c0d0p6 6810 71652960 cciss/c0d1 driver: cciss Fix this by adding code to change '/' to '!' in dev_set_name() to handle this until dev_set_name() is converted to use kobject_set_name(). Signed-off-by: Roland Dreier Acked-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index 8079afc..55e5309 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -777,10 +777,16 @@ static void device_remove_class_symlinks(struct device *dev) int dev_set_name(struct device *dev, const char *fmt, ...) { va_list vargs; + char *s; va_start(vargs, fmt); vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs); va_end(vargs); + + /* ewww... some of these buggers have / in the name... */ + while ((s = strchr(dev->bus_id, '/'))) + *s = '!'; + return 0; } EXPORT_SYMBOL_GPL(dev_set_name); -- cgit v0.10.2 From 72638f598ec9f05a43fcb22dc1dd8dc34c43acc1 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 8 Jan 2009 03:06:42 +0100 Subject: PNP: fix broken pnp lowercasing for acpi module aliases Based on a patch from Brian, who identified the issue. Signed-off-by: Bryan Kadzban Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index d4dc222..491b8b1 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -366,11 +366,17 @@ static void do_pnp_device_entry(void *symval, unsigned long size, for (i = 0; i < count; i++) { const char *id = (char *)devs[i].id; + char acpi_id[sizeof(devs[0].id)]; + int j; buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"pnp:d%s*\");\n", id); + + /* fix broken pnp bus lowercasing */ + for (j = 0; j < sizeof(acpi_id); j++) + acpi_id[j] = toupper(id[j]); buf_printf(&mod->dev_table_buf, - "MODULE_ALIAS(\"acpi*:%s:*\");\n", id); + "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id); } } @@ -416,10 +422,17 @@ static void do_pnp_card_entries(void *symval, unsigned long size, /* add an individual alias for every device entry */ if (!dup) { + char acpi_id[sizeof(card->devs[0].id)]; + int k; + buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"pnp:d%s*\");\n", id); + + /* fix broken pnp bus lowercasing */ + for (k = 0; k < sizeof(acpi_id); k++) + acpi_id[k] = toupper(id[k]); buf_printf(&mod->dev_table_buf, - "MODULE_ALIAS(\"acpi*:%s:*\");\n", id); + "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id); } } } -- cgit v0.10.2 From 4503efd0891c40e30928afb4b23dc3f99c62a6b2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 20 Jan 2009 15:51:16 -0800 Subject: sysfs: fix problems with binary files Some sysfs binary files don't like having 0 passed to them as a size. Fix this up at the root by just returning to the vfs if userspace asks us for a zero sized buffer. Thanks to Pavel Roskin for pointing this out. Reported-by: Pavel Roskin Signed-off-by: Greg Kroah-Hartman diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 66f6e58..f2c478c 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -63,6 +63,9 @@ read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off) int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; @@ -131,6 +134,9 @@ static ssize_t write(struct file *file, const char __user *userbuf, int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; -- cgit v0.10.2 From 8adb711f3668b034e7b956fac951ed08b53e0d55 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Tue, 20 Jan 2009 12:17:28 -0800 Subject: debugfs: introduce stub for debugfs_create_size_t() when DEBUG_FS=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Toralf Förster reported a build failure in the WiMAX stack when CONFIG_DEBUG_FS=n http://linuxwimax.org/pipermail/wimax/2009-January/000449.html This is due to debugfs_create_size_t() missing an stub that returns -ENODEV when the DEBUGFS subsystem is not configured in (like the rest of the debugfs API). This patch adds said stub. Reported-by: Toralf Förster Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 23936b1..0f5c33b 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -162,6 +162,13 @@ static inline struct dentry *debugfs_create_x32(const char *name, mode_t mode, return ERR_PTR(-ENODEV); } +struct dentry *debugfs_create_size_t(const char *name, mode_t mode, + struct dentry *parent, + size_t *value) +{ + return ERR_PTR(-ENODEV); +} + static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode, struct dentry *parent, u32 *value) -- cgit v0.10.2 From c0e69a5bbc6fc74184aa043aadb9a53bc58f953b Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 14 Jan 2009 11:19:08 +0100 Subject: klist.c: bit 0 in pointer can't be used as flag The commit a1ed5b0cffe4b16a93a6a3390e8cee0fbef94f86 (klist: don't iterate over deleted entries) introduces use of the low bit in a pointer to indicate if the knode is dead or not, assuming that this bit is always free. This is not true for all architectures, CRIS for example may align data on byte borders. The result is a bunch of warnings on bootup, devices not being added correctly etc, reported by Hinko Kocevar : ------------[ cut here ]------------ WARNING: at lib/klist.c:62 () Modules linked in: Stack from c1fe1cf0: c01cc7f4 c1fe1d11 c000eb4e c000e4de 00000000 00000000 c1f4f78f c1f50c2d c01d008c c1fdd1a0 c1fdd1a0 c1fe1d38 c0192954 c1fe0000 00000000 c1fe1dc0 00000002 7fffffff c1fe1da8 c0192d50 c1fe1dc0 00000002 7fffffff c1ff9fcc Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] <4>---[ end trace 4eaa2a86a8e2da22 ]--- ------------[ cut here ]------------ Repeat ad nauseam. Wed, Jan 14, 2009 at 12:11:32AM +0100, Bastien ROUCARIES wrote: > Perhaps using a pointerhackalign trick on this structure where > #define pointerhackalign(x) __attribute__ ((aligned (x))) > and declare > struct klist_node { > ... > } pointerhackalign(2); > > Because __attribute__ ((aligned (x))) could only increase alignment > it will safe to do that and serve as documentation purpose :) That works, but we need to do it not for the struct klist_node, but for the struct we insert into the void * in klist_node, which is struct klist. Reported-by: Hinko Kocevar Signed-off-by: Jesper Nilsson Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/klist.h b/include/linux/klist.h index d5a27af..e91a4e5 100644 --- a/include/linux/klist.h +++ b/include/linux/klist.h @@ -22,7 +22,7 @@ struct klist { struct list_head k_list; void (*get)(struct klist_node *); void (*put)(struct klist_node *); -}; +} __attribute__ ((aligned (4))); #define KLIST_INIT(_name, _get, _put) \ { .k_lock = __SPIN_LOCK_UNLOCKED(_name.k_lock), \ -- cgit v0.10.2 From 7bfa122c19e47b1dee47476ce6e9ed6ba16f8269 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 26 Dec 2008 08:27:24 +0100 Subject: arch/sh/mm: Move a dereference below a NULL test If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/). // @disable is_null@ identifier f; expression E; identifier fld; statement S; @@ + if (E == NULL) S f(...,E->fld,...); - if (E == NULL) S @@ identifier f; expression E; identifier fld; statement S; @@ + if (!E) S f(...,E->fld,...); - if (!E) S // Signed-off-by: Julia Lawall Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index 6e0be24..31e1bb5 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -71,9 +71,9 @@ void *__ioremap(unsigned long phys_addr, unsigned long size, * Ok, go for it.. */ area = get_vm_area(size, VM_IOREMAP); - pr_debug("Get vm_area returns %p addr %p\n",area,area->addr); if (!area) return NULL; + pr_debug("Get vm_area returns %p addr %p\n", area, area->addr); area->phys_addr = phys_addr; addr = area->addr; if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, -- cgit v0.10.2 From c2bcc4a7ffa7438a8ded91fbd0313c50d420ff45 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 2 Jan 2009 02:52:57 -0500 Subject: asm-sh/posix_types_{32,64}.h: drop __GLIBC__/__USE_ALL usage Bring sh in line with all the other ports. Not sure how sh missed this change as all the other arches were being updated ... Signed-off-by: Mike Frysinger Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h index 0a3d2f5..2172732 100644 --- a/arch/sh/include/asm/posix_types_32.h +++ b/arch/sh/include/asm/posix_types_32.h @@ -39,14 +39,10 @@ typedef long long __kernel_loff_t; #endif typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ } __kernel_fsid_t; -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#if defined(__KERNEL__) #undef __FD_SET static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) @@ -117,6 +113,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p) } } -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* defined(__KERNEL__) */ #endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h index 0620317..f83e9bd 100644 --- a/arch/sh/include/asm/posix_types_64.h +++ b/arch/sh/include/asm/posix_types_64.h @@ -48,14 +48,10 @@ typedef long long __kernel_loff_t; #endif typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ } __kernel_fsid_t; -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#if defined(__KERNEL__) #undef __FD_SET static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) @@ -126,6 +122,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p) } } -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* defined(__KERNEL__) */ #endif /* __ASM_SH64_POSIX_TYPES_H */ -- cgit v0.10.2 From ff04ea40ea3037b26d01bdeacbab1d6c15c5df61 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 2 Dec 2008 16:38:34 +0900 Subject: sh: mach-migor: Add ov772x support. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index cc1408119..332b90d 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include