From b00c52dae6d9ee8d0f2407118ef6544ae5524781 Mon Sep 17 00:00:00 2001 From: Wenwei Tao Date: Fri, 13 May 2016 22:59:20 +0800 Subject: cgroup: remove redundant cleanup in css_create When create css failed, before call css_free_rcu_fn, we remove the css id and exit the percpu_ref, but we will do these again in css_free_work_fn, so they are redundant. Especially the css id, that would cause problem if we remove it twice, since it may be assigned to another css after the first remove. tj: This was broken by two commits updating the free path without synchronizing the creation failure path. This can be easily triggered by trying to create more than 64k memory cgroups. Signed-off-by: Wenwei Tao Signed-off-by: Tejun Heo Cc: Vladimir Davydov Fixes: 9a1049da9bd2 ("percpu-refcount: require percpu_ref to be exited explicitly") Fixes: 01e586598b22 ("cgroup: release css->id after css_free") Cc: stable@vger.kernel.org # v3.17+ diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 86cb5c6..789b84f 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -5150,7 +5150,7 @@ static struct cgroup_subsys_state *css_create(struct cgroup *cgrp, err = cgroup_idr_alloc(&ss->css_idr, NULL, 2, 0, GFP_KERNEL); if (err < 0) - goto err_free_percpu_ref; + goto err_free_css; css->id = err; /* @css is ready to be brought online now, make it visible */ @@ -5174,9 +5174,6 @@ static struct cgroup_subsys_state *css_create(struct cgroup *cgrp, err_list_del: list_del_rcu(&css->sibling); - cgroup_idr_remove(&ss->css_idr, css->id); -err_free_percpu_ref: - percpu_ref_exit(&css->refcnt); err_free_css: call_rcu(&css->rcu_head, css_free_rcu_fn); return ERR_PTR(err); -- cgit v0.10.2 From 4f3532506a339d91e593da59eea4e7143e698ca3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 17 May 2016 08:42:12 +0000 Subject: ASoC: rsnd: open 31bit of SSICKR mask SSICKR (Gen2) / BRGCKR (Gen3) 31bit mask should be opened, because BRGB (= for 48kHz) might select it. Special thanks Yokoyama-san Reported-by: Hiroyuki Yokoyama Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 606399d..0891014 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -522,7 +522,7 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, } } - rsnd_mod_bset(adg_mod, SSICKR, 0x00FF0000, ckr); + rsnd_mod_bset(adg_mod, SSICKR, 0x80FF0000, ckr); rsnd_mod_write(adg_mod, BRRA, rbga); rsnd_mod_write(adg_mod, BRRB, rbgb); -- cgit v0.10.2 From 595144c1141c951a3c6bb9004ae6a2bc29aad66f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 17 May 2016 20:57:50 +0200 Subject: clk: rockchip: initialize flags of clk_init_data in mmc-phase clock The flags element of clk_init_data was never initialized for mmc- phase-clocks resulting in the element containing a random value and thus possibly enabling unwanted clock flags. Fixes: 89bf26cbc1a0 ("clk: rockchip: Add support for the mmc clock phases using the framework") Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index bc856f2..4601130 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -154,6 +154,7 @@ struct clk *rockchip_clk_register_mmc(const char *name, return ERR_PTR(-ENOMEM); init.name = name; + init.flags = 0; init.num_parents = num_parents; init.parent_names = parent_names; init.ops = &rockchip_mmc_clk_ops; -- cgit v0.10.2 From 176df69cb080c8cd813e51f800069e13ee607641 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 May 2016 11:42:16 -0700 Subject: clk: rockchip: mark rk3399 GIC clocks as critical We never want to kill the GIC. Noticed when making other clock fixups, and seeing the newly-constructed clock tree try to disable cpll, where we had this parent structure: aclk_gic <------\ |--- aclk_gic_pre <-- cpll <-- pll_cpll aclk_gic_noc <--/ Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 291543f..145756c 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1466,6 +1466,8 @@ static struct rockchip_clk_branch rk3399_clk_pmu_branches[] __initdata = { static const char *const rk3399_cru_critical_clocks[] __initconst = { "aclk_cci_pre", + "aclk_gic", + "aclk_gic_noc", "pclk_perilp0", "pclk_perilp0", "hclk_perilp0", -- cgit v0.10.2 From 3bd14ae9da9194d369334556a70a7ff73ef94491 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Fri, 13 May 2016 11:42:17 -0700 Subject: clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src There was a typo, swapping 'c' <--> 'g'. Signed-off-by: Xing Zheng Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 145756c..9f86bfe 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -832,9 +832,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(13), 1, GFLAGS), /* perihp */ - GATE(0, "cpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, + GATE(0, "cpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 0, GFLAGS), - GATE(0, "gpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, + GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 1, GFLAGS), COMPOSITE(ACLK_PERIHP, "aclk_perihp", mux_aclk_perihp_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(14), 7, 1, MFLAGS, 0, 5, DFLAGS, -- cgit v0.10.2 From 4715f81afc342996f680b08c944a712d9cbef11b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 12 May 2016 11:03:16 -0700 Subject: clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" This reverts commit 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization"). Though not totally obvious from the commit message nor from the source code, that commit appears to be trying to reset the "_drv" MMC clocks to 90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are not touched). The major problem here is that it doesn't properly reset things. The phase is a two bit field and the commit only touches one of the two bits. Thus the commit had the following affect: - phase 0 => phase 90 - phase 90 => phase 90 - phase 180 => phase 270 - phase 270 => phase 270 Things get even weirder if you happen to have a bootloader that was actually using delay elements (should be no reason to, but you never know), since those are additional bits that weren't touched by the original patch. This is unlikely to be what we actually want. Checking on rk3288-veyron devices, I can see that the bootloader leaves these clocks as: - emmc: phase 180 - sdmmc: phase 90 - sdio0: phase 90 Thus on rk3288-veyron devices the commit we're reverting had the effect of changing the eMMC clock to phase 270. This probably explains the scattered reports I've heard of eMMC devices not working on some veyron devices when using the upstream kernel. The original commit was presumably made because previously the kernel didn't touch the "_drv" phase at all and relied on whatever value was there when the kernel started. If someone was using a bootloader that touched the "_drv" phase then, indeed, we should have code in the kernel to fix that. ...and also, to get ideal timings, we should also have the kernel change the phase depending on the speed mode. In fact, that's the subject of a recent patch I posted at . Ideally, we should take both the patch posted to dw_mmc and this revert. Since those will likely go through different trees, here I describe behavior with the combos: 1. Just this revert: likely will fix rk3288-veyron eMMC on some devices + other cases; might break someone with a strange bootloader that sets the phase to 0 or one that uses delay elements (pretty unpredicable what would happen in that case). 2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will totally override the broken patch and fix everything. 3. Both patches: fixes everyone. Once dw_mmc is initting properly then any defaults from the clock code doesn't mattery. Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson Reviewed-by: Shawn Lin [emmc and sdmmc still work on all current boards in mainline after this revert, so they should take precedence over any out-of-tree board that will hopefully again get fixed with the better upcoming dw_mmc change.] Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 4601130..077fcdc 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -41,8 +41,6 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3 #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2 #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET) -#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1 -#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1 #define PSECS_PER_SEC 1000000000000LL @@ -163,15 +161,6 @@ struct clk *rockchip_clk_register_mmc(const char *name, mmc_clock->reg = reg; mmc_clock->shift = shift; - /* - * Assert init_state to soft reset the CLKGEN - * for mmc tuning phase and degree - */ - if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT) - writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET, - ROCKCHIP_MMC_INIT_STATE_RESET, - mmc_clock->shift), mmc_clock->reg); - clk = clk_register(NULL, &mmc_clock->hw); if (IS_ERR(clk)) kfree(mmc_clock); -- cgit v0.10.2 From 3183c0d519ff83af2926382c11716496f01d34bf Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 26 May 2016 21:49:08 +0800 Subject: clk: rockchip: fix cpuclk registration error handling It maybe due to a copy-paste error the error handing should be cclk not clk when checking if the cpuclk registration succeeded. Reported-by: Lin Huang Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c index 4bb130c..05b3d73 100644 --- a/drivers/clk/rockchip/clk-cpu.c +++ b/drivers/clk/rockchip/clk-cpu.c @@ -321,9 +321,9 @@ struct clk *rockchip_clk_register_cpuclk(const char *name, } cclk = clk_register(NULL, &cpuclk->hw); - if (IS_ERR(clk)) { + if (IS_ERR(cclk)) { pr_err("%s: could not register cpuclk %s\n", __func__, name); - ret = PTR_ERR(clk); + ret = PTR_ERR(cclk); goto free_rate_table; } -- cgit v0.10.2 From 99cf4b267e4863b95c7d33f59371b6ccdfd4a4ce Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 25 May 2016 10:49:52 -0300 Subject: ASoC: ak4613: Remove owner assignment from platform_driver This platform_driver does not need to set an owner as it will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index 647f69d..33d2f2e1 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -530,7 +530,6 @@ static int ak4613_i2c_remove(struct i2c_client *client) static struct i2c_driver ak4613_i2c_driver = { .driver = { .name = "ak4613-codec", - .owner = THIS_MODULE, .of_match_table = ak4613_of_match, }, .probe = ak4613_i2c_probe, -- cgit v0.10.2 From 500e06b9a3f50d3db992eb3b8dc309f695d33f63 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 31 May 2016 19:09:55 +0530 Subject: ASoC: hdac_hdmi: Fix potential NULL dereference Static checker warns: Pointer 'hlink' returned from call to function 'snd_hdac_ext_bus_get_link' at line may be NULL and will be dereferenced" So we should always check the return of snd_hdac_ext_bus_get_link() before referencing the link pointer Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 181cd3b..2abb742 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1474,6 +1474,11 @@ static int hdmi_codec_probe(struct snd_soc_codec *codec) * exit, we call pm_runtime_suspend() so that will do for us */ hlink = snd_hdac_ext_bus_get_link(edev->ebus, dev_name(&edev->hdac.dev)); + if (!hlink) { + dev_err(&edev->hdac.dev, "hdac link not found\n"); + return -EIO; + } + snd_hdac_ext_bus_link_get(edev->ebus, hlink); ret = create_fill_widget_route_map(dapm); @@ -1634,6 +1639,11 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev) /* hold the ref while we probe */ hlink = snd_hdac_ext_bus_get_link(edev->ebus, dev_name(&edev->hdac.dev)); + if (!hlink) { + dev_err(&edev->hdac.dev, "hdac link not found\n"); + return -EIO; + } + snd_hdac_ext_bus_link_get(edev->ebus, hlink); hdmi_priv = devm_kzalloc(&codec->dev, sizeof(*hdmi_priv), GFP_KERNEL); @@ -1744,6 +1754,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) } hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev)); + if (!hlink) { + dev_err(dev, "hdac link not found\n"); + return -EIO; + } + snd_hdac_ext_bus_link_put(ebus, hlink); return 0; @@ -1765,6 +1780,11 @@ static int hdac_hdmi_runtime_resume(struct device *dev) return 0; hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev)); + if (!hlink) { + dev_err(dev, "hdac link not found\n"); + return -EIO; + } + snd_hdac_ext_bus_link_get(ebus, hlink); err = snd_hdac_display_power(bus, true); -- cgit v0.10.2 From 3ac066e2227cb272c097f34475247fa0a6cdd2ff Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Tue, 31 May 2016 17:56:23 +0200 Subject: spi: spi-ti-qspi: Suspend the queue before removing the device Before disabling the pm_runtime, we must ensure that there is no transfer in progress nor will a new one be started. Otherwise the message pump will fail and in the end, the process requesting the transfer will be stuck. This behavior has been observed when transferring data from a SPI flash with dd while removing the module on a DRA7x-evm. Signed-off-by: Jean-Jacques Hiblot Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 443f664..29ea8d2 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -646,6 +646,13 @@ free_master: static int ti_qspi_remove(struct platform_device *pdev) { + struct ti_qspi *qspi = platform_get_drvdata(pdev); + int rc; + + rc = spi_master_suspend(qspi->master); + if (rc) + return rc; + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); -- cgit v0.10.2 From becc7ae544c61395b5eba7b9913e14aa567ca07a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 22 May 2016 11:06:06 +0200 Subject: MAINTAINERS: Add file patterns for mtd device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven Cc: David Woodhouse Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris diff --git a/MAINTAINERS b/MAINTAINERS index 7304d2e..adcb370 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7457,6 +7457,7 @@ Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ T: git git://git.infradead.org/linux-mtd.git T: git git://git.infradead.org/l2-mtd.git S: Maintained +F: Documentation/devicetree/bindings/mtd/ F: drivers/mtd/ F: include/linux/mtd/ F: include/uapi/mtd/ -- cgit v0.10.2 From 540c26087bfbad6ea72758b76b16ae6282a73fea Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Wed, 1 Jun 2016 11:32:51 -0700 Subject: Input: xpad - fix rumble on Xbox One controllers with 2015 firmware Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 804dbcc..923c572 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1031,17 +1031,17 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect case XTYPE_XBOXONE: packet->data[0] = 0x09; /* activate rumble */ - packet->data[1] = 0x08; + packet->data[1] = 0x00; packet->data[2] = xpad->odata_serial++; - packet->data[3] = 0x08; /* continuous effect */ - packet->data[4] = 0x00; /* simple rumble mode */ - packet->data[5] = 0x03; /* L and R actuator only */ - packet->data[6] = 0x00; /* TODO: LT actuator */ - packet->data[7] = 0x00; /* TODO: RT actuator */ + packet->data[3] = 0x09; + packet->data[4] = 0x00; + packet->data[5] = 0x0F; + packet->data[6] = 0x00; + packet->data[7] = 0x00; packet->data[8] = strong / 512; /* left actuator */ packet->data[9] = weak / 512; /* right actuator */ - packet->data[10] = 0x80; /* length of pulse */ - packet->data[11] = 0x00; /* stop period of pulse */ + packet->data[10] = 0xFF; + packet->data[11] = 0x00; packet->data[12] = 0x00; packet->len = 13; packet->pending = true; -- cgit v0.10.2 From 8e1cc0e4bab7b44a55ea59d26683b618b34950bc Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 2 Jun 2016 12:55:05 +0300 Subject: ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG port The TX and RX offset is different for each serializers when using the CFG port for DMA access. When using the CFG port only one serializer can be used per direction so print error message and only configure the first serializer's offset. Reported-by: Misael Lopez Cruz Suggested-by: Misael Lopez Cruz Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 0f66fda..237dc67 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -1513,8 +1513,9 @@ static struct davinci_mcasp_pdata am33xx_mcasp_pdata = { }; static struct davinci_mcasp_pdata dra7_mcasp_pdata = { - .tx_dma_offset = 0x200, - .rx_dma_offset = 0x284, + /* The CFG port offset will be calculated if it is needed */ + .tx_dma_offset = 0, + .rx_dma_offset = 0, .version = MCASP_VERSION_4, }; @@ -1734,6 +1735,52 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp) return PCM_EDMA; } +static u32 davinci_mcasp_txdma_offset(struct davinci_mcasp_pdata *pdata) +{ + int i; + u32 offset = 0; + + if (pdata->version != MCASP_VERSION_4) + return pdata->tx_dma_offset; + + for (i = 0; i < pdata->num_serializer; i++) { + if (pdata->serial_dir[i] == TX_MODE) { + if (!offset) { + offset = DAVINCI_MCASP_TXBUF_REG(i); + } else { + pr_err("%s: Only one serializer allowed!\n", + __func__); + break; + } + } + } + + return offset; +} + +static u32 davinci_mcasp_rxdma_offset(struct davinci_mcasp_pdata *pdata) +{ + int i; + u32 offset = 0; + + if (pdata->version != MCASP_VERSION_4) + return pdata->rx_dma_offset; + + for (i = 0; i < pdata->num_serializer; i++) { + if (pdata->serial_dir[i] == RX_MODE) { + if (!offset) { + offset = DAVINCI_MCASP_RXBUF_REG(i); + } else { + pr_err("%s: Only one serializer allowed!\n", + __func__); + break; + } + } + } + + return offset; +} + static int davinci_mcasp_probe(struct platform_device *pdev) { struct snd_dmaengine_dai_dma_data *dma_data; @@ -1862,7 +1909,7 @@ static int davinci_mcasp_probe(struct platform_device *pdev) if (dat) dma_data->addr = dat->start; else - dma_data->addr = mem->start + pdata->tx_dma_offset; + dma_data->addr = mem->start + davinci_mcasp_txdma_offset(pdata); dma = &mcasp->dma_request[SNDRV_PCM_STREAM_PLAYBACK]; res = platform_get_resource(pdev, IORESOURCE_DMA, 0); @@ -1883,7 +1930,8 @@ static int davinci_mcasp_probe(struct platform_device *pdev) if (dat) dma_data->addr = dat->start; else - dma_data->addr = mem->start + pdata->rx_dma_offset; + dma_data->addr = + mem->start + davinci_mcasp_rxdma_offset(pdata); dma = &mcasp->dma_request[SNDRV_PCM_STREAM_CAPTURE]; res = platform_get_resource(pdev, IORESOURCE_DMA, 1); diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h index 1e8787f..afddc80 100644 --- a/sound/soc/davinci/davinci-mcasp.h +++ b/sound/soc/davinci/davinci-mcasp.h @@ -85,9 +85,9 @@ (n << 2)) /* Transmit Buffer for Serializer n */ -#define DAVINCI_MCASP_TXBUF_REG 0x200 +#define DAVINCI_MCASP_TXBUF_REG(n) (0x200 + (n << 2)) /* Receive Buffer for Serializer n */ -#define DAVINCI_MCASP_RXBUF_REG 0x280 +#define DAVINCI_MCASP_RXBUF_REG(n) (0x280 + (n << 2)) /* McASP FIFO Registers */ #define DAVINCI_MCASP_V2_AFIFO_BASE (0x1010) -- cgit v0.10.2 From 6de7df8d1b1a45a07d6ecc6b4f94179e1e68f5ec Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 31 May 2016 23:12:00 +0200 Subject: ASoC: hdmi-codec: select CONFIG_HDMI SND_SOC_HDMI_CODEC can be enabled without HDMI support, leading to a link error: In function `hdmi_codec_hw_params': sound/soc/codecs/hdmi-codec.c:188: undefined reference to `hdmi_audio_infoframe_init' sound/built-in.o:(.debug_addr+0x1a5c0): undefined reference to `hdmi_audio_infoframe_init' This changes the Kconfig file to select HDMI, as the other codec using hdmi_audio_infoframe_init already does. Signed-off-by: Arnd Bergmann Acked-by: Jyri Sarha Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4d82a58..f3fb98f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -483,9 +483,10 @@ config SND_SOC_DMIC tristate config SND_SOC_HDMI_CODEC - tristate - select SND_PCM_ELD - select SND_PCM_IEC958 + tristate + select SND_PCM_ELD + select SND_PCM_IEC958 + select HDMI config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC" -- cgit v0.10.2 From 62d0e71df063101e4551327bd9fa9aaa3535c86b Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Fri, 3 Jun 2016 08:54:18 +0800 Subject: clk: rockchip: release io resource when failing to init clk on rk3399 We should call iounmap to relase reg_base since it's not going to be used any more if failing to init clk. This was missing on the newly added rk3399 clock tree. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 9f86bfe..8059a8d 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1510,6 +1510,7 @@ static void __init rk3399_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip clk init failed\n", __func__); + iounmap(reg_base); return; } @@ -1555,6 +1556,7 @@ static void __init rk3399_pmu_clk_init(struct device_node *np) ctx = rockchip_clk_init(np, reg_base, CLKPMU_NR_CLKS); if (IS_ERR(ctx)) { pr_err("%s: rockchip pmu clk init failed\n", __func__); + iounmap(reg_base); return; } -- cgit v0.10.2 From fee48cf8374569a3888fd8c8536283e6067f0cfb Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Fri, 1 Apr 2016 14:12:12 -0700 Subject: ath10k: fix deadlock when peer cannot be created We must not attempt to send WMI packets while holding the data-lock, as it may deadlock: BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath10k/wmi.c:1824 in_atomic(): 1, irqs_disabled(): 0, pid: 2878, name: wpa_supplicant ============================================= [ INFO: possible recursive locking detected ] 4.4.6+ #21 Tainted: G W O --------------------------------------------- wpa_supplicant/2878 is trying to acquire lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] but task is already holding lock: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ar->data_lock)->rlock); lock(&(&ar->data_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by wpa_supplicant/2878: #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x14 #1: (&ar->conf_mutex){+.+.+.}, at: [] ath10k_add_interface+0x3b/0xbda [ath10k_core] #2: (&(&ar->data_lock)->rlock){+.-...}, at: [] ath10k_peer_create+0x122/0x1ae [ath10k_core] #3: (rcu_read_lock){......}, at: [] rcu_read_lock+0x0/0x66 [mac80211] stack backtrace: CPU: 3 PID: 2878 Comm: wpa_supplicant Tainted: G W O 4.4.6+ #21 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 0000000000000000 ffff8801fcadf8f0 ffffffff8137086d ffffffff82681720 ffffffff82681720 ffff8801fcadf9b0 ffffffff8112e3be ffff8801fcadf920 0000000100000000 ffffffff82681720 ffffffffa0721500 ffff8801fcb8d348 Call Trace: [] dump_stack+0x81/0xb6 [] __lock_acquire+0xc5b/0xde7 [] ? ath10k_wmi_tx_beacons_iter+0x15/0x11a [ath10k_core] [] ? mark_lock+0x24/0x201 [] lock_acquire+0x132/0x1cb [] ? lock_acquire+0x132/0x1cb [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] _raw_spin_lock_bh+0x31/0x40 [] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] __iterate_interfaces+0x9d/0x13d [mac80211] [] ieee80211_iterate_active_interfaces_atomic+0x32/0x3e [mac80211] [] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [] ath10k_wmi_tx_beacons_nowait.isra.13+0x14/0x16 [ath10k_core] [] ath10k_wmi_cmd_send+0x71/0x242 [ath10k_core] [] ath10k_wmi_peer_delete+0x3f/0x42 [ath10k_core] [] ath10k_peer_create+0x15e/0x1ae [ath10k_core] [] ath10k_add_interface+0x70d/0xbda [ath10k_core] [] drv_add_interface+0x123/0x1a5 [mac80211] [] ieee80211_do_open+0x351/0x667 [mac80211] [] ieee80211_open+0x49/0x4c [mac80211] [] __dev_open+0x88/0xde [] __dev_change_flags+0xa4/0x13a [] dev_change_flags+0x1f/0x54 [] devinet_ioctl+0x2b9/0x5c9 [] ? copy_to_user+0x32/0x38 [] inet_ioctl+0x81/0x9d [] ? inet_ioctl+0x81/0x9d [] sock_do_ioctl+0x20/0x3d [] sock_ioctl+0x222/0x22e [] do_vfs_ioctl+0x453/0x4d7 [] ? __sys_recvmsg+0x4c/0x5b [] ? __fget_light+0x48/0x6c [] SyS_ioctl+0x52/0x74 [] entry_SYSCALL_64_fastpath+0x16/0x7a Signed-off-by: Ben Greear Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6dd1d26..4040f94 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -679,10 +679,10 @@ static int ath10k_peer_create(struct ath10k *ar, peer = ath10k_peer_find(ar, vdev_id, addr); if (!peer) { + spin_unlock_bh(&ar->data_lock); ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n", addr, vdev_id); ath10k_wmi_peer_delete(ar, vdev_id, addr); - spin_unlock_bh(&ar->data_lock); return -ENOENT; } -- cgit v0.10.2 From 572f1f613a109e03b52e72b62df2d2c0e595d3bd Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Tue, 7 Jun 2016 11:03:08 +0800 Subject: ASoC: rt5670: fix HP Playback Volume control The register setting for HP Playback Volume is inverted. So, set the invert flag in SOC_DOUBLE_TLV. Signed-off-by: Bard Liao Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 49a9e70..0af5ddb 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -619,7 +619,7 @@ static const struct snd_kcontrol_new rt5670_snd_controls[] = { RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("HP Playback Volume", RT5670_HP_VOL, RT5670_L_VOL_SFT, RT5670_R_VOL_SFT, - 39, 0, out_vol_tlv), + 39, 1, out_vol_tlv), /* OUTPUT Control */ SOC_DOUBLE("OUT Channel Switch", RT5670_LOUT1, RT5670_VOL_L_SFT, RT5670_VOL_R_SFT, 1, 1), -- cgit v0.10.2 From 8d0a0710ea0d22881fdb40eb79d346a98cc64ae6 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 2 Jun 2016 17:59:54 +0300 Subject: ath10k: fix crash related to printing features This looks like a regression from commit c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file"), we were printing the features from a wrong struct. Fixes: c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file") Signed-off-by: Ben Greear [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 49af624..a92a0ba 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1083,7 +1083,7 @@ int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, } ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", - ar->running_fw->fw_file.fw_features, + fw_file->fw_features, sizeof(fw_file->fw_features)); break; case ATH10K_FW_IE_FW_IMAGE: -- cgit v0.10.2 From 1ca830b110cd9d067327571f1136fdbf1ef2b4d3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 23 May 2016 08:45:44 -0300 Subject: [media] v4l2-ioctl: fix stupid mistake in cropcap condition Fix duplicate tests in condition. The second test for vidioc_cropcap should have tested for vidioc_g_selection instead. Signed-off-by: Hans Verkuil Reported-by: David Binderman Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index 28e5be2..528390f 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -2171,7 +2171,7 @@ static int v4l_cropcap(const struct v4l2_ioctl_ops *ops, * The determine_valid_ioctls() call already should ensure * that this can never happen, but just in case... */ - if (WARN_ON(!ops->vidioc_cropcap && !ops->vidioc_cropcap)) + if (WARN_ON(!ops->vidioc_cropcap && !ops->vidioc_g_selection)) return -ENOTTY; if (ops->vidioc_cropcap) -- cgit v0.10.2 From 6519c3d7b8621c9f4333c98ed4b703029b51ba79 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 May 2016 09:09:33 -0300 Subject: [media] adv7604: Don't ignore pad number in subdev DV timings pad operations The dv_timings_cap() and enum_dv_timings() pad operations take a pad number as an input argument and return the DV timings capabilities and list of supported DV timings for that pad. Commit bd3e275f3ec0 ("[media] media: i2c: adv7604: Use v4l2-dv-timings helpers") broke this as it started ignoring the pad number, always returning the information associated with the currently selected input. Fix it. Fixes: bd3e275f3ec0 ("[media] media: i2c: adv7604: Use v4l2-dv-timings helpers") Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil Cc: # for v4.6 Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index beb2841..3f1ab49 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -779,11 +779,31 @@ static const struct v4l2_dv_timings_cap adv76xx_timings_cap_digital = { V4L2_DV_BT_CAP_CUSTOM) }; -static inline const struct v4l2_dv_timings_cap * -adv76xx_get_dv_timings_cap(struct v4l2_subdev *sd) +/* + * Return the DV timings capabilities for the requested sink pad. As a special + * case, pad value -1 returns the capabilities for the currently selected input. + */ +static const struct v4l2_dv_timings_cap * +adv76xx_get_dv_timings_cap(struct v4l2_subdev *sd, int pad) { - return is_digital_input(sd) ? &adv76xx_timings_cap_digital : - &adv7604_timings_cap_analog; + if (pad == -1) { + struct adv76xx_state *state = to_state(sd); + + pad = state->selected_input; + } + + switch (pad) { + case ADV76XX_PAD_HDMI_PORT_A: + case ADV7604_PAD_HDMI_PORT_B: + case ADV7604_PAD_HDMI_PORT_C: + case ADV7604_PAD_HDMI_PORT_D: + return &adv76xx_timings_cap_digital; + + case ADV7604_PAD_VGA_RGB: + case ADV7604_PAD_VGA_COMP: + default: + return &adv7604_timings_cap_analog; + } } @@ -1329,7 +1349,7 @@ static int stdi2dv_timings(struct v4l2_subdev *sd, const struct v4l2_bt_timings *bt = &v4l2_dv_timings_presets[i].bt; if (!v4l2_valid_dv_timings(&v4l2_dv_timings_presets[i], - adv76xx_get_dv_timings_cap(sd), + adv76xx_get_dv_timings_cap(sd, -1), adv76xx_check_dv_timings, NULL)) continue; if (vtotal(bt) != stdi->lcf + 1) @@ -1430,18 +1450,22 @@ static int adv76xx_enum_dv_timings(struct v4l2_subdev *sd, return -EINVAL; return v4l2_enum_dv_timings_cap(timings, - adv76xx_get_dv_timings_cap(sd), adv76xx_check_dv_timings, NULL); + adv76xx_get_dv_timings_cap(sd, timings->pad), + adv76xx_check_dv_timings, NULL); } static int adv76xx_dv_timings_cap(struct v4l2_subdev *sd, struct v4l2_dv_timings_cap *cap) { struct adv76xx_state *state = to_state(sd); + unsigned int pad = cap->pad; if (cap->pad >= state->source_pad) return -EINVAL; - *cap = *adv76xx_get_dv_timings_cap(sd); + *cap = *adv76xx_get_dv_timings_cap(sd, pad); + cap->pad = pad; + return 0; } @@ -1450,9 +1474,9 @@ static int adv76xx_dv_timings_cap(struct v4l2_subdev *sd, static void adv76xx_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings) { - v4l2_find_dv_timings_cap(timings, adv76xx_get_dv_timings_cap(sd), - is_digital_input(sd) ? 250000 : 1000000, - adv76xx_check_dv_timings, NULL); + v4l2_find_dv_timings_cap(timings, adv76xx_get_dv_timings_cap(sd, -1), + is_digital_input(sd) ? 250000 : 1000000, + adv76xx_check_dv_timings, NULL); } static unsigned int adv7604_read_hdmi_pixelclock(struct v4l2_subdev *sd) @@ -1620,7 +1644,7 @@ static int adv76xx_s_dv_timings(struct v4l2_subdev *sd, bt = &timings->bt; - if (!v4l2_valid_dv_timings(timings, adv76xx_get_dv_timings_cap(sd), + if (!v4l2_valid_dv_timings(timings, adv76xx_get_dv_timings_cap(sd, -1), adv76xx_check_dv_timings, NULL)) return -ERANGE; -- cgit v0.10.2 From b36fad65d61fffe4b662d4bfb1ed673c455a36a2 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 7 Jun 2016 11:57:02 +0200 Subject: kbuild: Initialize exported variables The NOSTDINC_FLAGS variable is exported, so it needs to be cleared to avoid duplicating its content when running make from within make (e.g. in the packaging targets). This became an issue after commit 9c8fa9bc08f6 ("kbuild: fix if_change and friends to consider argument order"), which no longer ignores the duplicate options. As Paulo Zanoni points out, the LDFLAGS_vmlinux variable has the same problem. Reported-by: "Zanoni, Paulo R" Fixes: 9c8fa9bc08f6 ("kbuild: fix if_change and friends to consider argument order") Signed-off-by: Michal Marek diff --git a/Makefile b/Makefile index 0f70de6..af0c463 100644 --- a/Makefile +++ b/Makefile @@ -363,11 +363,13 @@ CHECK = sparse CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ -Wbitwise -Wno-return-void $(CF) +NOSTDINC_FLAGS = CFLAGS_MODULE = AFLAGS_MODULE = LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = +LDFLAGS_vmlinux = CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized CFLAGS_KCOV = -fsanitize-coverage=trace-pc -- cgit v0.10.2 From 4dc0dd83603f05dc3ae152af33ecb15104c313f3 Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Wed, 8 Jun 2016 09:32:51 +0200 Subject: spi: rockchip: Signal unfinished DMA transfers When using DMA, the transfer_one callback should return 1 because the transfer hasn't finished yet. A previous commit changed the function to return 0 when the DMA channels were correctly prepared. This manifested in Veyron boards with this message: [ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time Fixes: ea9849113343 ("spi: rockchip: check return value of dmaengine_prep_slave_sg") Signed-off-by: Tomeu Vizoso Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index cd89682..1026e18 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -578,7 +578,7 @@ static int rockchip_spi_transfer_one( struct spi_device *spi, struct spi_transfer *xfer) { - int ret = 1; + int ret = 0; struct rockchip_spi *rs = spi_master_get_devdata(master); WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && @@ -627,6 +627,8 @@ static int rockchip_spi_transfer_one( spi_enable_chip(rs, 1); ret = rockchip_spi_prepare_dma(rs); } + /* successful DMA prepare means the transfer is in progress */ + ret = ret ? ret : 1; } else { spi_enable_chip(rs, 1); ret = rockchip_spi_pio_transfer(rs); -- cgit v0.10.2 From 4de2d58bc973caa8988b44ddd11787e57051c843 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 20:57:44 +0200 Subject: clk: sunxi: tcon-ch1: Do not return a negative error in get_parent get_parent is supposed to return an unsigned 8 bit integer, so returning -EINVAL is a bad idea. Remove it. Reported-by: Dan Carpenter Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard diff --git a/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c index 98a4582..2485852 100644 --- a/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c +++ b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c @@ -85,9 +85,6 @@ static u8 tcon_ch1_get_parent(struct clk_hw *hw) reg = readl(tclk->reg) >> TCON_CH1_SCLK2_MUX_SHIFT; reg &= reg >> TCON_CH1_SCLK2_MUX_MASK; - if (reg >= num_parents) - return -EINVAL; - return reg; } -- cgit v0.10.2 From 07ea0b4d9a0abde8d252738079a8a811c5132a94 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 2 Apr 2016 12:28:31 +0200 Subject: clk: sunxi: display: Add per-clock flags The TCON channel 0 clock that is the parent clock of our pixel clock is expected to change its rate depending on the resolution we want to output in our display engine. However, since it's only a mux, the only way it can do that is by changing its parents rate. Allow to give flags in our display clocks description, and add the CLK_SET_RATE_PARENT flag for the TCON channel 0 flag. Fixes: a3b4956ee6d9 ("clk: sunxi: display: Add per-clock flags") Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard diff --git a/drivers/clk/sunxi/clk-sun4i-display.c b/drivers/clk/sunxi/clk-sun4i-display.c index 445a749..9780fac 100644 --- a/drivers/clk/sunxi/clk-sun4i-display.c +++ b/drivers/clk/sunxi/clk-sun4i-display.c @@ -33,6 +33,8 @@ struct sun4i_a10_display_clk_data { u8 width_div; u8 width_mux; + + u32 flags; }; struct reset_data { @@ -166,7 +168,7 @@ static void __init sun4i_a10_display_init(struct device_node *node, data->has_div ? &div->hw : NULL, data->has_div ? &clk_divider_ops : NULL, &gate->hw, &clk_gate_ops, - 0); + data->flags); if (IS_ERR(clk)) { pr_err("%s: Couldn't register the clock\n", clk_name); goto free_div; @@ -232,6 +234,7 @@ static const struct sun4i_a10_display_clk_data sun4i_a10_tcon_ch0_data __initcon .offset_rst = 29, .offset_mux = 24, .width_mux = 2, + .flags = CLK_SET_RATE_PARENT, }; static void __init sun4i_a10_tcon_ch0_setup(struct device_node *node) -- cgit v0.10.2 From 06a84db74c3572cde79eb1b04f301399eafb8226 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 2 May 2016 15:27:34 +0300 Subject: iwlwifi: mvm: increase scan timeout to 20 seconds The 16 seconds timeout we were using turned out to be too short. Recalculations by system show that the total time in both bands should be < 18.5 seconds, even in the slowest cases (e.g. DCM P2P with DTIM=2). Rounding it up to 20 seconds for a bit more safety. Fixes: 728e825f81b1 ("iwlwifi: mvm: add a scan timeout for regular scans") Signed-off-by: Luca Coelho diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 6f609dd..e78fc56 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1222,7 +1222,7 @@ static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) return -EIO; } -#define SCAN_TIMEOUT (16 * HZ) +#define SCAN_TIMEOUT (20 * HZ) void iwl_mvm_scan_timeout(unsigned long data) { -- cgit v0.10.2 From 7d6a1ab6a2db180122dee8db6c201f2dcf677813 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 May 2016 10:20:29 +0300 Subject: iwlwifi: mvm: fix RCU splat in TKIP's update_key The commit below mistakenly changed an rcu_dereference_check to a rcu_dereference_protected which introduced the following RCU warning: [ INFO: suspicious RCU usage. ] 4.6.0-rc7-next-20160513-dbg-00004-g8de8b92-dirty #655 Not tainted ------------------------------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:1069 suspicious rcu_dereference_protected() usage! Call Trace: [] lockdep_rcu_suspicious+0xf7/0x100 [] iwl_mvm_get_key_sta.part.0+0x5d/0x80 [iwlmvm] [] iwl_mvm_update_tkip_key+0xd3/0x162 [iwlmvm] [] iwl_mvm_mac_update_tkip_key+0x17/0x19 [iwlmvm] [] ieee80211_tkip_decrypt_data+0x22c/0x24b [mac80211] [] ieee80211_crypto_tkip_decrypt+0xc5/0x110 [mac80211] [] ieee80211_rx_handlers+0x9bb/0x1fe1 [mac80211] Fixes: 13303c0fb148 ("iwlwifi: mvm: use helpers to get iwl_mvm_sta") Reported-by: Sergey Senozhatsky Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index fea4d3437..0454bfe 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1852,12 +1852,18 @@ static struct iwl_mvm_sta *iwl_mvm_get_key_sta(struct iwl_mvm *mvm, mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { u8 sta_id = mvmvif->ap_sta_id; + sta = rcu_dereference_check(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); + /* * It is possible that the 'sta' parameter is NULL, * for example when a GTK is removed - the sta_id will then * be the AP ID, and no station was passed by mac80211. */ - return iwl_mvm_sta_from_staid_protected(mvm, sta_id); + if (IS_ERR_OR_NULL(sta)) + return NULL; + + return iwl_mvm_sta_from_mac80211(sta); } return NULL; -- cgit v0.10.2 From 1f9788f335d7c3145bcb59bd570c5b9ef7203ef4 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 16 May 2016 14:34:20 +0300 Subject: iwlwifi: mvm: fix potential NULL-dereference in iwl_mvm_reorder() We try to access sta before we check for IS_ERR_OR_NULL(), so we may end up accessing a NULL pointer. To prevent that, move the conversion from sta to mvm_sta below the check. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Reported-by: Dan Carpenter Signed-off-by: Luca Coelho diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index ac2c571..2c61516 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -581,7 +581,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, struct iwl_rx_mpdu_desc *desc) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_mvm_sta *mvm_sta; struct iwl_mvm_baid_data *baid_data; struct iwl_mvm_reorder_buffer *buffer; struct sk_buff *tail; @@ -604,6 +604,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, if (WARN_ON(IS_ERR_OR_NULL(sta))) return false; + mvm_sta = iwl_mvm_sta_from_mac80211(sta); + /* not a data packet */ if (!ieee80211_is_data_qos(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1)) -- cgit v0.10.2 From aa950524d501afa28869b7f56e539fd9e744dd9f Mon Sep 17 00:00:00 2001 From: Ayala Beker Date: Wed, 1 Jun 2016 00:28:09 +0300 Subject: iwlwifi: mvm: set the encryption type of an IGTK key The FW expect the driver to set the encryption algorithm type when installing the IGTK key in the HW. Currently when installing CMAC IGTK key we don't set the algorithm type and as a result the FW fails to calculate the MIC of multicast management frames. Fix it. Signed-off-by: Ayala Beker Signed-off-by: Luca Coelho diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 0454bfe..b23ab4a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1961,6 +1961,14 @@ static int iwl_mvm_send_sta_igtk(struct iwl_mvm *mvm, struct ieee80211_key_seq seq; const u8 *pn; + switch (keyconf->cipher) { + case WLAN_CIPHER_SUITE_AES_CMAC: + igtk_cmd.ctrl_flags |= cpu_to_le32(STA_KEY_FLG_CCM); + break; + default: + return -EINVAL; + } + memcpy(igtk_cmd.IGTK, keyconf->key, keyconf->keylen); ieee80211_get_key_rx_seq(keyconf, 0, &seq); pn = seq.aes_cmac.pn; -- cgit v0.10.2 From 280a3efa82fccc9532c968a77e5162cb9f0af497 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Jun 2016 14:46:37 +0200 Subject: iwlwifi: mvm: fix a few firmware capability checks My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index e5f267b..18a8474 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -3851,8 +3851,8 @@ static int iwl_mvm_mac_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return -ENOENT; mutex_lock(&mvm->mutex); @@ -3898,8 +3898,8 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw, struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - if (fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) + if (!fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) return; /* if beacon filtering isn't on mac80211 does it anyway */ -- cgit v0.10.2 From fc0f7e3317c5f406e6d5520209b4689a4ffecfdf Mon Sep 17 00:00:00 2001 From: Manfred Schlaegl Date: Mon, 6 Jun 2016 10:47:47 +0200 Subject: net: phy: smsc: reintroduced unconditional soft reset We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl Signed-off-by: David S. Miller diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 2e21e93..b62c4aa 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -75,22 +75,13 @@ static int smsc_phy_reset(struct phy_device *phydev) * in all capable mode before using it. */ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { - int timeout = 50000; - - /* set "all capable" mode and reset the phy */ + /* set "all capable" mode */ rc |= MII_LAN83C185_MODE_ALL; phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); - phy_write(phydev, MII_BMCR, BMCR_RESET); - - /* wait end of reset (max 500 ms) */ - do { - udelay(10); - if (timeout-- == 0) - return -1; - rc = phy_read(phydev, MII_BMCR); - } while (rc & BMCR_RESET); } - return 0; + + /* reset the phy */ + return genphy_soft_reset(phydev); } static int lan911x_config_init(struct phy_device *phydev) -- cgit v0.10.2 From 56fae404fb2c306db0a35dad0d16fa24c65678f3 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 7 Jun 2016 12:06:58 +0300 Subject: bridge: Fix incorrect re-injection of STP packets Commit 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") fixed incorrect usage of NF_HOOK's return value by consuming packets in okfn via br_pass_frame_up(). However, this function re-injects packets to the Rx path with skb->dev set to the bridge device, which breaks kernel's STP, as all STP packets appear to originate from the bridge device itself. Instead, if STP is enabled and bridge isn't a 802.1ad bridge, then learn packet's SMAC and inject it back to the Rx path for further processing by the packet handlers. The patch also makes netfilter's behavior consistent with regards to packets destined to the Bridge Group Address, as no hook registered at LOCAL_IN will ever be called, regardless if STP is enabled or not. Cc: Florian Westphal Cc: Shmulik Ladkani Cc: Toshiaki Makita Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 1607977..43d2cd8 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -213,8 +213,7 @@ drop: } EXPORT_SYMBOL_GPL(br_handle_frame_finish); -/* note: already called with rcu_read_lock */ -static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb) +static void __br_handle_local_finish(struct sk_buff *skb) { struct net_bridge_port *p = br_port_get_rcu(skb->dev); u16 vid = 0; @@ -222,6 +221,14 @@ static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_bu /* check if vlan is allowed, to avoid spoofing */ if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid)) br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false); +} + +/* note: already called with rcu_read_lock */ +static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb) +{ + struct net_bridge_port *p = br_port_get_rcu(skb->dev); + + __br_handle_local_finish(skb); BR_INPUT_SKB_CB(skb)->brdev = p->br->dev; br_pass_frame_up(skb); @@ -274,7 +281,9 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb) if (p->br->stp_enabled == BR_NO_STP || fwd_mask & (1u << dest[5])) goto forward; - break; + *pskb = skb; + __br_handle_local_finish(skb); + return RX_HANDLER_PASS; case 0x01: /* IEEE MAC (Pause) */ goto drop; -- cgit v0.10.2 From c3ec5e5ce9cea1f369a5a8ad69d6471680796bc6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 9 Jun 2016 18:05:09 +0100 Subject: net: diag: add missing declarations The functions inet_diag_msg_common_fill and inet_diag_msg_attrs_fill seem to have been missed from the include/linux/inet_diag.h header file. Add them to fix the following warnings: net/ipv4/inet_diag.c:69:6: warning: symbol 'inet_diag_msg_common_fill' was not declared. Should it be static? net/ipv4/inet_diag.c:108:5: warning: symbol 'inet_diag_msg_attrs_fill' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: David S. Miller diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index 7c27fa1..feb04ea 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -52,6 +52,12 @@ struct sock *inet_diag_find_one_icsk(struct net *net, int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk); +void inet_diag_msg_common_fill(struct inet_diag_msg *r, struct sock *sk); + +int inet_diag_msg_attrs_fill(struct sock *sk, struct sk_buff *skb, + struct inet_diag_msg *r, int ext, + struct user_namespace *user_ns); + extern int inet_diag_register(const struct inet_diag_handler *handler); extern void inet_diag_unregister(const struct inet_diag_handler *handler); #endif /* _INET_DIAG_H_ */ diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index 1ce724b..f69edcf 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -3,12 +3,6 @@ #include #include -extern void inet_diag_msg_common_fill(struct inet_diag_msg *r, - struct sock *sk); -extern int inet_diag_msg_attrs_fill(struct sock *sk, struct sk_buff *skb, - struct inet_diag_msg *r, int ext, - struct user_namespace *user_ns); - static void sctp_diag_get_info(struct sock *sk, struct inet_diag_msg *r, void *info); -- cgit v0.10.2 From 0b392be9a86560dae3af2e7528f226ff465ab549 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 10 Jun 2016 12:11:06 +0100 Subject: net: ipconfig: avoid warning by making ic_addrservaddr static The symbol ic_addrservaddr is not static, but has no declaration to match so make it static to fix the following warning: net/ipv4/ipconfig.c:130:8: warning: symbol 'ic_addrservaddr' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: David S. Miller diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 2ed9dd2..eccf9fd 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -127,7 +127,7 @@ __be32 ic_myaddr = NONE; /* My IP address */ static __be32 ic_netmask = NONE; /* Netmask for local subnet */ __be32 ic_gateway = NONE; /* Gateway IP address */ -__be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ +static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ __be32 ic_servaddr = NONE; /* Boot server IP address */ -- cgit v0.10.2 From 562c5a70400c75f50d99de631666ac7cc2f03958 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:58 +0200 Subject: net: mediatek: add missing return code check The code fails to check if the scratch memory was properly allocated. Add this check and return with an error if the allocation failed. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 4763252..11cd730 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -495,6 +495,9 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) eth->scratch_head = kcalloc(cnt, MTK_QDMA_PAGE_SIZE, GFP_KERNEL); + if (unlikely(!eth->scratch_head)) + return -ENOMEM; + dma_addr = dma_map_single(eth->dev, eth->scratch_head, cnt * MTK_QDMA_PAGE_SIZE, DMA_FROM_DEVICE); -- cgit v0.10.2 From 605e4fe476956c67ced8518247e6c9601a31b868 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:27:59 +0200 Subject: net: mediatek: fix missing free of scratch memory Scratch memory gets allocated in mtk_init_fq_dma() but the corresponding code to free it is missing inside mtk_dma_free() causing a memory leak. With this patch applied, we can run ifconfig up/down several thousand times without any problems. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 11cd730..fb8b17d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -481,14 +481,14 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd, /* the qdma core needs scratch memory to be setup */ static int mtk_init_fq_dma(struct mtk_eth *eth) { - dma_addr_t phy_ring_head, phy_ring_tail; + dma_addr_t phy_ring_tail; int cnt = MTK_DMA_SIZE; dma_addr_t dma_addr; int i; eth->scratch_ring = dma_alloc_coherent(eth->dev, cnt * sizeof(struct mtk_tx_dma), - &phy_ring_head, + ð->phy_scratch_ring, GFP_ATOMIC | __GFP_ZERO); if (unlikely(!eth->scratch_ring)) return -ENOMEM; @@ -505,19 +505,19 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) return -ENOMEM; memset(eth->scratch_ring, 0x0, sizeof(struct mtk_tx_dma) * cnt); - phy_ring_tail = phy_ring_head + + phy_ring_tail = eth->phy_scratch_ring + (sizeof(struct mtk_tx_dma) * (cnt - 1)); for (i = 0; i < cnt; i++) { eth->scratch_ring[i].txd1 = (dma_addr + (i * MTK_QDMA_PAGE_SIZE)); if (i < cnt - 1) - eth->scratch_ring[i].txd2 = (phy_ring_head + + eth->scratch_ring[i].txd2 = (eth->phy_scratch_ring + ((i + 1) * sizeof(struct mtk_tx_dma))); eth->scratch_ring[i].txd3 = TX_DMA_SDL(MTK_QDMA_PAGE_SIZE); } - mtk_w32(eth, phy_ring_head, MTK_QDMA_FQ_HEAD); + mtk_w32(eth, eth->phy_scratch_ring, MTK_QDMA_FQ_HEAD); mtk_w32(eth, phy_ring_tail, MTK_QDMA_FQ_TAIL); mtk_w32(eth, (cnt << 16) | cnt, MTK_QDMA_FQ_CNT); mtk_w32(eth, MTK_QDMA_PAGE_SIZE << 16, MTK_QDMA_FQ_BLEN); @@ -1210,6 +1210,14 @@ static void mtk_dma_free(struct mtk_eth *eth) for (i = 0; i < MTK_MAC_COUNT; i++) if (eth->netdev[i]) netdev_reset_queue(eth->netdev[i]); + if (eth->scratch_ring) { + dma_free_coherent(eth->dev, + MTK_DMA_SIZE * sizeof(struct mtk_tx_dma), + eth->scratch_ring, + eth->phy_scratch_ring); + eth->scratch_ring = NULL; + eth->phy_scratch_ring = 0; + } mtk_tx_clean(eth); mtk_rx_clean(eth); kfree(eth->scratch_head); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index eed626d..57f7e8a 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -357,6 +357,7 @@ struct mtk_rx_ring { * @rx_ring: Pointer to the memore holding info about the RX ring * @rx_napi: The NAPI struct * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring + * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. * @clk_ethif: The ethif clock * @clk_esw: The switch clock @@ -384,6 +385,7 @@ struct mtk_eth { struct mtk_rx_ring rx_ring; struct napi_struct rx_napi; struct mtk_tx_dma *scratch_ring; + dma_addr_t phy_scratch_ring; void *scratch_head; struct clk *clk_ethif; struct clk *clk_esw; -- cgit v0.10.2 From 2fae723cefb8bfe712371978288aa0a70b54802e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:00 +0200 Subject: net: mediatek: invalid buffer lookup in mtk_tx_map() The lookup of the tx_buffer in the error path inside mtk_tx_map() uses the wrong descriptor pointer. This looks like a copy & paste error. Change the code to use the correct pointer. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index fb8b17d..8c3e543 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -674,7 +674,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, err_dma: do { - tx_buf = mtk_desc_to_tx_buf(ring, txd); + tx_buf = mtk_desc_to_tx_buf(ring, itxd); /* unmap dma */ mtk_tx_unmap(&dev->dev, tx_buf); -- cgit v0.10.2 From 94321a9fc9f5b6c6e949cc7c69741538f556ab74 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:01 +0200 Subject: net: mediatek: dropped rx packets are not being counted properly There are two places inside mtk_poll_rx where rx_dropped is not being incremented properly. Fix this by adding the missing code to increment the counter. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 8c3e543..b6d3c21 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -829,6 +829,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) { skb_free_frag(new_data); + netdev->stats.rx_dropped++; goto release_desc; } @@ -836,6 +837,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, skb = build_skb(data, ring->frag_size); if (unlikely(!skb)) { put_page(virt_to_head_page(new_data)); + netdev->stats.rx_dropped++; goto release_desc; } skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); -- cgit v0.10.2 From 6675086d04e7c0748cd5884f7c8611b5f0836250 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:02 +0200 Subject: net: mediatek: add next data pointer coherency protection The QDMA engine can fail to update the register pointing to the next TX descriptor if this bit does not get set in the QDMA configuration register. Not setting this bit can result in invalid values inside the TX rings registers which will causes TX stalls. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b6d3c21..f30c2e47 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1282,7 +1282,7 @@ static int mtk_start_dma(struct mtk_eth *eth) mtk_w32(eth, MTK_TX_WB_DDONE | MTK_RX_DMA_EN | MTK_TX_DMA_EN | MTK_RX_2B_OFFSET | MTK_DMA_SIZE_16DWORDS | - MTK_RX_BT_32DWORDS, + MTK_RX_BT_32DWORDS | MTK_NDP_CO_PRO, MTK_QDMA_GLO_CFG); return 0; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 57f7e8a..a5eb7c6 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -91,6 +91,7 @@ #define MTK_QDMA_GLO_CFG 0x1A04 #define MTK_RX_2B_OFFSET BIT(31) #define MTK_RX_BT_32DWORDS (3 << 11) +#define MTK_NDP_CO_PRO BIT(10) #define MTK_TX_WB_DDONE BIT(6) #define MTK_DMA_SIZE_16DWORDS (2 << 4) #define MTK_RX_DMA_BUSY BIT(3) -- cgit v0.10.2 From 2ff0bb61646f286fa97db2904491974302a14f1f Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:03 +0200 Subject: net: mediatek: disable all interrupts during probe The current code only disables those IRQs that we will later use. To ensure that we have a predefined state, we really want to disable all IRQs. Change the code to disable all IRQs to achieve this. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index f30c2e47..e3dadae9 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1396,7 +1396,7 @@ static int __init mtk_hw_init(struct mtk_eth *eth) /* disable delay and normal interrupt */ mtk_w32(eth, 0, MTK_QDMA_DELAY_INT); - mtk_irq_disable(eth, MTK_TX_DONE_INT | MTK_RX_DONE_INT); + mtk_irq_disable(eth, ~0); mtk_w32(eth, RST_GL_PSE, MTK_RST_GL); mtk_w32(eth, 0, MTK_RST_GL); -- cgit v0.10.2 From 04698cccb1de54d5d97fda2e4a1c6ca365da0f70 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:04 +0200 Subject: net: mediatek: fix threshold value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The logic to calculate the threshold value for stopping the TX queue is bad. Currently it will always use 1/2 of the rings size, which is way too much. Set the threshold to MAX_SKB_FRAGS. This makes sure that the queue is stopped when there is not enough room to accept an additional segment.  Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index e3dadae9..032939d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1033,8 +1033,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; - ring->thresh = max((unsigned long)MTK_DMA_SIZE >> 2, - MAX_SKB_FRAGS); + ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we * continue -- cgit v0.10.2 From eaadf9fd3f6390f6ecbd0dfbd5997a0486fc9d5e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:05 +0200 Subject: net: mediatek: increase watchdog_timeo During stress testing, after reducing the threshold value, we have seen TX timeouts that were caused by the watchdog_timeo value being too low. Increase the value to 5 * HZ which is a value commonly used by many other drivers. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 032939d..3b3ba2e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1709,7 +1709,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; SET_NETDEV_DEV(eth->netdev[id], eth->dev); - eth->netdev[id]->watchdog_timeo = HZ; + eth->netdev[id]->watchdog_timeo = 5 * HZ; eth->netdev[id]->netdev_ops = &mtk_netdev_ops; eth->netdev[id]->base_addr = (unsigned long)eth->base; eth->netdev[id]->vlan_features = MTK_HW_FEATURES & -- cgit v0.10.2 From 12c97c13ea7174db5b5dc4a1ef91d4e9245bb569 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:06 +0200 Subject: net: mediatek: fix off by one in the TX ring allocation The TX ring setup has an off by one error causing it to not utilise all descriptors. This has the side effect that we need to reset the next pointer at runtime to make it work. Fix the off by one and remove the code fixing the ring at runtime. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 3b3ba2e..c097e9e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -926,7 +926,6 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) } mtk_tx_unmap(eth->dev, tx_buf); - ring->last_free->txd2 = next_cpu; ring->last_free = desc; atomic_inc(&ring->free_count); @@ -1032,7 +1031,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) atomic_set(&ring->free_count, MTK_DMA_SIZE - 2); ring->next_free = &ring->dma[0]; - ring->last_free = &ring->dma[MTK_DMA_SIZE - 2]; + ring->last_free = &ring->dma[MTK_DMA_SIZE - 1]; ring->thresh = MAX_SKB_FRAGS; /* make sure that all changes to the dma ring are flushed before we -- cgit v0.10.2 From ad3cba989e8b1bbefe078eece29f0e8d8aaea1d6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:07 +0200 Subject: net: mediatek: only wake the queue if it is stopped The current code unconditionally wakes up the queue at the end of each tx_poll action. Change the code to only wake up the queues if any of them have actually been stopped before. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c097e9e..40e37b15 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -704,6 +704,20 @@ static inline int mtk_cal_txd_req(struct sk_buff *skb) return nfrags; } +static int mtk_queue_stopped(struct mtk_eth *eth) +{ + int i; + + for (i = 0; i < MTK_MAC_COUNT; i++) { + if (!eth->netdev[i]) + continue; + if (netif_queue_stopped(eth->netdev[i])) + return 1; + } + + return 0; +} + static void mtk_wake_queue(struct mtk_eth *eth) { int i; @@ -950,7 +964,8 @@ static int mtk_poll_tx(struct mtk_eth *eth, int budget, bool *tx_again) if (!total) return 0; - if (atomic_read(&ring->free_count) > ring->thresh) + if (mtk_queue_stopped(eth) && + (atomic_read(&ring->free_count) > ring->thresh)) mtk_wake_queue(eth); return total; -- cgit v0.10.2 From 82c6544dddc6c4bd940917af2f987dee6be0fc17 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 10 Jun 2016 13:28:08 +0200 Subject: net: mediatek: remove superfluous queue wake up call The code checks if the queue should be stopped because we are below the threshold of free descriptors only to check if it should be started again. If we do end up in a state where we are at the threshold limit, it makes more sense to just stop the queue and wait for the next IRQ to trigger the TX housekeeping again. There is no rush in enqueuing the next packet, it needs to wait for all the others in the queue to be dispatched first anyway. Signed-off-by: John Crispin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 40e37b15..d1cdc2d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -783,12 +783,9 @@ static int mtk_start_xmit(struct sk_buff *skb, struct net_device *dev) if (mtk_tx_map(skb, dev, tx_num, ring, gso) < 0) goto drop; - if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) { + if (unlikely(atomic_read(&ring->free_count) <= ring->thresh)) mtk_stop_queue(eth); - if (unlikely(atomic_read(&ring->free_count) > - ring->thresh)) - mtk_wake_queue(eth); - } + spin_unlock_irqrestore(ð->page_lock, flags); return NETDEV_TX_OK; -- cgit v0.10.2 From a2f27217e4e60e663b5b971b0ccb287a9548b04e Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 10 Jun 2016 16:53:05 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1..d8c77e8 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,13 +508,12 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); - if (!aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); + if (phydev && !aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v0.10.2 From 86c5fe4c932a8ef2d32f8b3d32cc9f0476fc54f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 10 Jun 2016 23:34:24 -0700 Subject: Revert "net: au1000_eth: fix PHY detection" This reverts commit a2f27217e4e60e663b5b971b0ccb287a9548b04e. I applied the wrong version of this. Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index d8c77e8..e0fb0f1 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -508,12 +508,13 @@ static int au1000_mii_probe(struct net_device *dev) /* find the first (lowest address) PHY * on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); - if (phydev && !aup->phy_search_highest_addr) - /* break out with first one found */ - break; - } + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (!aup->phy_search_highest_addr) + /* break out with first one found */ + break; + } if (aup->phy1_search_mac0) { /* try harder to find a PHY */ -- cgit v0.10.2 From 92ca8241533009e4e05a9f3999a75389678af094 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 11 Jun 2016 00:13:04 +0200 Subject: net: au1000_eth: fix PHY detection Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c index e0fb0f1..20760e1 100644 --- a/drivers/net/ethernet/amd/au1000_eth.c +++ b/drivers/net/ethernet/amd/au1000_eth.c @@ -509,8 +509,8 @@ static int au1000_mii_probe(struct net_device *dev) * on the current MAC's MII bus */ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) { - phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr); + if (mdiobus_get_phy(aup->mii_bus, phy_addr)) { + phydev = mdiobus_get_phy(aup->mii_bus, phy_addr); if (!aup->phy_search_highest_addr) /* break out with first one found */ break; -- cgit v0.10.2 From 6e85dbe4b461e59fa3cad6f6235cb47fa4c6a629 Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 3 Jun 2016 21:30:24 +0300 Subject: iio: inv_mpu6050: Fix use-after-free in ACPI code In some cases this can result in incorrectly returning a negative value from asus_acpi_get_sensor_info and the AK8963 magnetometer failing to show up. Note cpm is an alias for buffer.pointer which isn't apparent in this patch on it's own. Cc: Srinivas Pandruvada Signed-off-by: Crestez Dan Leonard Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index f62b8bd..dd6fc6d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -56,6 +56,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, int i; acpi_status status; union acpi_object *cpm; + int ret; status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -82,10 +83,10 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, } } } - + ret = cpm->package.count; kfree(buffer.pointer); - return cpm->package.count; + return ret; } static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data) -- cgit v0.10.2 From 7e982555d89cc84b1fa23b5d54c7ffd9f7753908 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 May 2016 15:50:24 +0200 Subject: staging: iio: fix ad7606_spi regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As pointed out by Geert Uytterhoeven, the patch was incorrect and breaks the driver, which was fortunately pointed out by this gcc warning: drivers/staging/iio/adc/ad7606_spi.c: In function ‘ad7606_spi_read_block’: drivers/staging/iio/adc/ad7606_spi.c:34: warning: ‘data’ is used uninitialized in this function The effect of the patch is that the data is copied into a random memory location (from the uninitialized pointer) instead of being byteswapped in place. This adds the initialization for the 'data' variable back to restore the original behavior. Cc: Ksenija Stanojevic Fixes: 87787e5ef727 ("Staging: iio: Fix sparse endian warning") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index 825da07..9587fa8 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -21,7 +21,7 @@ static int ad7606_spi_read_block(struct device *dev, { struct spi_device *spi = to_spi_device(dev); int i, ret; - unsigned short *data; + unsigned short *data = buf; __be16 *bdata = buf; ret = spi_read(spi, buf, count * 2); -- cgit v0.10.2 From f4070a19142d5ee06f0da0cef56a0e78995f172c Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 1 Jun 2016 20:25:54 +0100 Subject: staging: iio: ad5933: fix order of cycle conditions Correctly handle the settling time cycles value. The else branch is an impossible condition, > 1022 in the else branch of > 511. Flipping the order. Based on the Table 13 at the bottom of Page 25 of the Data Sheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf Signed-off-by: Luis de Bethencourt Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 9f43976..170ac98 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -444,10 +444,10 @@ static ssize_t ad5933_store(struct device *dev, st->settling_cycles = val; /* 2x, 4x handling, see datasheet */ - if (val > 511) - val = (val >> 1) | (1 << 9); - else if (val > 1022) + if (val > 1022) val = (val >> 2) | (3 << 9); + else if (val > 511) + val = (val >> 1) | (1 << 9); dat = cpu_to_be16(val); ret = ad5933_i2c_write(st->client, -- cgit v0.10.2 From 86ef7f9cbfd564377028098cf20cc1c3ec2c776d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Jun 2016 20:40:24 -0700 Subject: ipconfig: Protect ic_addrservaddr with IPCONFIG_DYNAMIC. >> net/ipv4/ipconfig.c:130:15: warning: 'ic_addrservaddr' defined but not used [-Wunused-variable] static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ Reported-by: kbuild test robot Signed-off-by: David S. Miller diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index eccf9fd..1d71c40 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -127,7 +127,9 @@ __be32 ic_myaddr = NONE; /* My IP address */ static __be32 ic_netmask = NONE; /* Netmask for local subnet */ __be32 ic_gateway = NONE; /* Gateway IP address */ +#ifdef IPCONFIG_DYNAMIC static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ +#endif __be32 ic_servaddr = NONE; /* Boot server IP address */ -- cgit v0.10.2 From cbdf451164785c9cf5acd5d2983c1e7c778df4c1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 12 Jun 2016 16:21:47 -0700 Subject: net_sched: prio: properly report out of memory errors At Qdisc creation or change time, prio_tune() creates missing pfifo qdiscs but does not return an error code if one qdisc could not be allocated. Leaving a qdisc in non operational state without telling user anything about this problem is not good. Also, testing if we replace something different than noop_qdisc a second time makes no sense so I removed useless code. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 4b0a821..071718b 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -202,26 +202,18 @@ static int prio_tune(struct Qdisc *sch, struct nlattr *opt) sch_tree_unlock(sch); for (i = 0; i < q->bands; i++) { - if (q->queues[i] == &noop_qdisc) { - struct Qdisc *child, *old; - - child = qdisc_create_dflt(sch->dev_queue, - &pfifo_qdisc_ops, - TC_H_MAKE(sch->handle, i + 1)); - if (child) { - sch_tree_lock(sch); - old = q->queues[i]; - q->queues[i] = child; - - if (old != &noop_qdisc) { - qdisc_tree_reduce_backlog(old, - old->q.qlen, - old->qstats.backlog); - qdisc_destroy(old); - } - sch_tree_unlock(sch); - } - } + struct Qdisc *child; + + if (q->queues[i] != &noop_qdisc) + continue; + + child = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, + TC_H_MAKE(sch->handle, i + 1)); + if (!child) + return -ENOMEM; + sch_tree_lock(sch); + q->queues[i] = child; + sch_tree_unlock(sch); } return 0; } -- cgit v0.10.2 From d941ebe88a411aa281cc80477a93feb931a1b50b Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Sat, 11 Jun 2016 01:11:54 +0300 Subject: net: ethernet: ti: cpsw: use destroy ctlr to destroy channels There is no reason to destroy channels that are destroyed while cpdma_ctlr destroy. In this case no need to remember how much channels where created and destroy them by one, as cpdma_ctlr destroys all of them. Signed-off-by: Ivan Khoronzhuk Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e6bb0ec..5319089 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2505,8 +2505,6 @@ static int cpsw_probe(struct platform_device *pdev) clean_ale_ret: cpsw_ale_destroy(priv->ale); clean_dma_ret: - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); clean_runtime_disable_ret: pm_runtime_disable(&pdev->dev); @@ -2534,8 +2532,6 @@ static int cpsw_remove(struct platform_device *pdev) unregister_netdev(ndev); cpsw_ale_destroy(priv->ale); - cpdma_chan_destroy(priv->txch); - cpdma_chan_destroy(priv->rxch); cpdma_ctlr_destroy(priv->dma); pm_runtime_disable(&pdev->dev); device_for_each_child(&pdev->dev, NULL, cpsw_remove_child_device); -- cgit v0.10.2 From 975f57fdff1d0eb9816806cabd27162a8a1a4038 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:02 +1000 Subject: crypto: vmx - Fix ABI detection When calling ppc-xlate.pl, we pass it either linux-ppc64 or linux-ppc64le. The script however was expecting linux64le, a result of its OpenSSL origins. This means we aren't obeying the ppc64le ABIv2 rules. Fix this by checking for linux-ppc64le. Fixes: 5ca55738201c ("crypto: vmx - comply with ABIs that specify vrsave as reserved.") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu diff --git a/drivers/crypto/vmx/ppc-xlate.pl b/drivers/crypto/vmx/ppc-xlate.pl index 9f4994c..b18e67d 100644 --- a/drivers/crypto/vmx/ppc-xlate.pl +++ b/drivers/crypto/vmx/ppc-xlate.pl @@ -141,7 +141,7 @@ my $vmr = sub { # Some ABIs specify vrsave, special-purpose register #256, as reserved # for system use. -my $no_vrsave = ($flavour =~ /aix|linux64le/); +my $no_vrsave = ($flavour =~ /linux-ppc64le/); my $mtspr = sub { my ($f,$idx,$ra) = @_; if ($idx == 256 && $no_vrsave) { -- cgit v0.10.2 From 12d3f49e1ffbbf8cbbb60acae5a21103c5c841ac Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 10 Jun 2016 16:47:03 +1000 Subject: crypto: vmx - Increase priority of aes-cbc cipher All of the VMX AES ciphers (AES, AES-CBC and AES-CTR) are set at priority 1000. Unfortunately this means we never use AES-CBC and AES-CTR, because the base AES-CBC cipher that is implemented on top of AES inherits its priority. To fix this, AES-CBC and AES-CTR have to be a higher priority. Set them to 2000. Testing on a POWER8 with: cryptsetup benchmark --cipher aes --key-size 256 Shows decryption speed increase from 402.4 MB/s to 3069.2 MB/s, over 7x faster. Thanks to Mike Strosaker for helping me debug this issue. Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Herbert Xu diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c index 495577b..94ad5c0 100644 --- a/drivers/crypto/vmx/aes_cbc.c +++ b/drivers/crypto/vmx/aes_cbc.c @@ -182,7 +182,7 @@ struct crypto_alg p8_aes_cbc_alg = { .cra_name = "cbc(aes)", .cra_driver_name = "p8_aes_cbc", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index 0a3c1b0..38ed10d 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -166,7 +166,7 @@ struct crypto_alg p8_aes_ctr_alg = { .cra_name = "ctr(aes)", .cra_driver_name = "p8_aes_ctr", .cra_module = THIS_MODULE, - .cra_priority = 1000, + .cra_priority = 2000, .cra_type = &crypto_blkcipher_type, .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_NEED_FALLBACK, .cra_alignmask = 0, -- cgit v0.10.2 From 19ced623db2fe91604d69f7d86b03144c5107739 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Jun 2016 14:56:39 +0200 Subject: crypto: ux500 - memmove the right size The hash buffer is really HASH_BLOCK_SIZE bytes, someone must have thought that memmove takes n*u32 words by mistake. Tests work as good/bad as before after this patch. Cc: Joakim Bech Cc: stable@vger.kernel.org Reported-by: David Binderman Signed-off-by: Linus Walleij Signed-off-by: Herbert Xu diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 574e87c..9acccad 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -781,7 +781,7 @@ static int hash_process_data(struct hash_device_data *device_data, &device_data->state); memmove(req_ctx->state.buffer, device_data->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_resume_state() failed!\n", @@ -832,7 +832,7 @@ static int hash_process_data(struct hash_device_data *device_data, memmove(device_data->state.buffer, req_ctx->state.buffer, - HASH_BLOCK_SIZE / sizeof(u32)); + HASH_BLOCK_SIZE); if (ret) { dev_err(device_data->dev, "%s: hash_save_state() failed!\n", __func__); -- cgit v0.10.2 From d72fea6214f3fee2355d8cb6c51348059d98768b Mon Sep 17 00:00:00 2001 From: Ajit Pandey Date: Mon, 13 Jun 2016 13:35:15 +0100 Subject: ASoC: wm5110: Add missing route from OUT3R to SYSCLK Output 3 is stereo on wm5110 and all inputs/outputs should have a connection to SYSCLK. This patch adds the missing DAPM route. Signed-off-by: Ajit Pandey Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index b5820e4..d54f1b4 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -1723,6 +1723,7 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = { { "OUT2L", NULL, "SYSCLK" }, { "OUT2R", NULL, "SYSCLK" }, { "OUT3L", NULL, "SYSCLK" }, + { "OUT3R", NULL, "SYSCLK" }, { "OUT4L", NULL, "SYSCLK" }, { "OUT4R", NULL, "SYSCLK" }, { "OUT5L", NULL, "SYSCLK" }, -- cgit v0.10.2 From 19edeb30c55079c9bba4573d700bbcafed03303c Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 13 Jun 2016 13:35:16 +0100 Subject: ASoC: wm5102: Correct supported channels on trace compressed DAI The audio trace firmware on wm5102 only supports 4 channels correct the DAI driver structure to reflect this. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index da60e3f..e7fe6b7 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1872,7 +1872,7 @@ static struct snd_soc_dai_driver wm5102_dai[] = { .capture = { .stream_name = "Audio Trace CPU", .channels_min = 1, - .channels_max = 6, + .channels_max = 4, .rates = WM5102_RATES, .formats = WM5102_FORMATS, }, -- cgit v0.10.2 From ea1d39a31d3b1b6060b6e83e5a29c069a124c68a Mon Sep 17 00:00:00 2001 From: Oscar Date: Tue, 14 Jun 2016 14:14:35 +0800 Subject: usb: common: otg-fsm: add license to usb-otg-fsm Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Cc: #v4.1+ Signed-off-by: Oscar Signed-off-by: Peter Chen diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 9059b7d..2f537bb 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -21,6 +21,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -450,3 +451,4 @@ int otg_statemachine(struct otg_fsm *fsm) return fsm->state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 6d9fe44bd73d567d04d3a68a2d2fa521ab9532f2 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sun4i: fix FIFO limit When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index 1ddd9e2..e7e4aec 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -179,7 +179,10 @@ static int sun4i_spi_transfer_one(struct spi_master *master, /* We don't support transfer larger than the FIFO */ if (tfr->len > SUN4I_FIFO_DEPTH) - return -EINVAL; + return -EMSGSIZE; + + if (tfr->tx_buf && tfr->len >= SUN4I_FIFO_DEPTH) + return -EMSGSIZE; reinit_completion(&sspi->done); sspi->tx_buf = tfr->tx_buf; @@ -269,8 +272,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master, sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len)); sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len)); - /* Fill the TX FIFO */ - sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH); + /* + * Fill the TX FIFO + * Filling the FIFO fully causes timeout for some reason + * at least on spi2 on A10s + */ + sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH - 1); /* Enable the interrupts */ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC); -- cgit v0.10.2 From 719bd6542044efd9b338a53dba1bef45f40ca169 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Mon, 13 Jun 2016 17:46:49 +0000 Subject: spi: sunxi: fix transfer timeout The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek Acked-by: Maxime Ripard Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index e7e4aec..cf007f3 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master, { struct sun4i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -286,9 +287,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master, reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 42e2c4b..7fce79a 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, { struct sun6i_spi *sspi = spi_master_get_devdata(master); unsigned int mclk_rate, div, timeout; + unsigned int start, end, tx_time; unsigned int tx_len = 0; int ret = 0; u32 reg; @@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master, reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); + tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U); + start = jiffies; timeout = wait_for_completion_timeout(&sspi->done, - msecs_to_jiffies(1000)); + msecs_to_jiffies(tx_time)); + end = jiffies; if (!timeout) { + dev_warn(&master->dev, + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms", + dev_name(&spi->dev), tfr->len, tfr->speed_hz, + jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; goto out; } -- cgit v0.10.2 From 8d950d2fb23b696d393020486ab6a350bcb2c582 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 9 Jun 2016 13:24:19 -0400 Subject: MAINTAINERS: Update the Calgary IOMMU entry Update the contact info for Muli, clean-up my name, and update the mailing list to the IOMMU mailing list. Signed-off-by: Jon Mason Cc: Andrew Morton Cc: Bartlomiej Zolnierkiewicz Cc: Greg Kroah-Hartman Cc: Krzysztof Kozlowski Cc: Linus Torvalds Cc: Muli Ben-Yehuda Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1465493059-11840-2-git-send-email-jdmason@kudzu.us Signed-off-by: Ingo Molnar diff --git a/MAINTAINERS b/MAINTAINERS index 16700e4..f589a9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2773,9 +2773,9 @@ F: include/net/caif/ F: net/caif/ CALGARY x86-64 IOMMU -M: Muli Ben-Yehuda -M: "Jon D. Mason" -L: discuss@x86-64.org +M: Muli Ben-Yehuda +M: Jon Mason +L: iommu@lists.linux-foundation.org S: Maintained F: arch/x86/kernel/pci-calgary_64.c F: arch/x86/kernel/tce_64.c -- cgit v0.10.2 From e50525bef593c3dd0564df676c567d77f7c20322 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 9 Jun 2016 11:33:55 +0530 Subject: ath10k: fix deadlock while processing rx_in_ord_ind commit 5c86d97bcc1d ("ath10k: combine txrx and replenish task") introduced deadlock while processing rx in order indication message for qca6174 based devices. While merging replenish and txrx tasklets, replenish task should be called out of htt rx ring locking since it is also try to acquire the same lock. Unfortunately this issue is not exposed by other solutions (qca988x, qca99x0 & qca4019), as rx_in_ord_ind message is specific to qca6174 based devices. This patch fixes ============================================= [ INFO: possible recursive locking detected ] 4.7.0-rc2-wt-ath+ #1353 Tainted: G E --------------------------------------------- swapper/3/0 is trying to acquire lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_rx_msdu_buff_replenish+0x29/0x90 [ath10k_core] but task is already holding lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&htt->rx_ring.lock)->rlock); lock(&(&htt->rx_ring.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by swapper/3/0: #0: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=119151 Fixes: 5c86d97bcc1d ("ath10k: combine txrx and replenish task") Reported-by: Mike Lothian Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index cc979a4..813cdd2 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1904,7 +1904,6 @@ static void ath10k_htt_rx_in_ord_ind(struct ath10k *ar, struct sk_buff *skb) return; } } - ath10k_htt_rx_msdu_buff_replenish(htt); } static void ath10k_htt_rx_tx_fetch_resp_id_confirm(struct ath10k *ar, -- cgit v0.10.2 From e024111f6946f45cf1559a8c6fd48d2d0f696d07 Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Tue, 7 Jun 2016 15:47:07 +0300 Subject: ath9k: fix GPIO mask for AR9462 and AR9565 The incorrect GPIO mask cause kernel warning, when AR9462 access GPIO11. Also fix the mask for AR9565. WARNING: CPU: 1 PID: 199 at ../drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] CPU: 1 PID: 199 Comm: kworker/u16:9 Not tainted 4.7.0-rc1-next-20160530+ #5 Hardware name: Acer TravelMate P243/BA40_HC, BIOS V1.01 04/20/2012 Workqueue: events_power_efficient rfkill_poll 0000000000000000 ffff88002cf73d28 ffffffff813b8ddc 0000000000000000 0000000000000000 ffff88002cf73d68 ffffffff8107a331 00000ada00000086 ffff880148d9c018 000000000000000b ffff880147e68720 0000000000000200 Call Trace: [] dump_stack+0x63/0x87 [] __warn+0xd1/0xf0 [] warn_slowpath_null+0x1d/0x20 [] ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] [] ath9k_rfkill_poll_state+0x34/0x60 [ath9k] [] ieee80211_rfkill_poll+0x33/0x40 [mac80211] [] cfg80211_rfkill_poll+0x2a/0xc0 [cfg80211] [] rfkill_poll+0x24/0x50 [] process_one_work+0x153/0x3f0 [] worker_thread+0x12b/0x4b0 [] ? rescuer_thread+0x340/0x340 [] kthread+0xc9/0xe0 [] ret_from_fork+0x1f/0x40 [] ? kthread_park+0x60/0x60 Fixes: a01ab81b09c5 ("ath9k: define correct GPIO numbers and bits mask") Reported-by: Sudip Mukherjee Tested-by: Sudip Mukherjee Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9272ca9..80ff69f 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1122,12 +1122,12 @@ enum { #define AR9300_NUM_GPIO 16 #define AR9330_NUM_GPIO 16 #define AR9340_NUM_GPIO 23 -#define AR9462_NUM_GPIO 10 +#define AR9462_NUM_GPIO 14 #define AR9485_NUM_GPIO 12 #define AR9531_NUM_GPIO 18 #define AR9550_NUM_GPIO 24 #define AR9561_NUM_GPIO 23 -#define AR9565_NUM_GPIO 12 +#define AR9565_NUM_GPIO 14 #define AR9580_NUM_GPIO 16 #define AR7010_NUM_GPIO 16 @@ -1139,12 +1139,12 @@ enum { #define AR9300_GPIO_MASK 0x0000F4FF #define AR9330_GPIO_MASK 0x0000F4FF #define AR9340_GPIO_MASK 0x0000000F -#define AR9462_GPIO_MASK 0x000003FF +#define AR9462_GPIO_MASK 0x00003FFF #define AR9485_GPIO_MASK 0x00000FFF #define AR9531_GPIO_MASK 0x0000000F #define AR9550_GPIO_MASK 0x0000000F #define AR9561_GPIO_MASK 0x0000000F -#define AR9565_GPIO_MASK 0x00000FFF +#define AR9565_GPIO_MASK 0x00003FFF #define AR9580_GPIO_MASK 0x0000F4FF #define AR7010_GPIO_MASK 0x0000FFFF -- cgit v0.10.2 From b914bb55f2abd66937c23fa0b89becaf9bcceb37 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 14 Jun 2016 21:33:44 +0530 Subject: ASoC: Intel: Skylake: Initialize module list for Broxton The module list was not initialized for Broxton DSP code, so initialize it. Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 965ce40..8b95e09 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -291,6 +291,7 @@ int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, sst_dsp_mailbox_init(sst, (BXT_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ), SKL_ADSP_W0_UP_SZ, BXT_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ); + INIT_LIST_HEAD(&sst->module_list); ret = skl_ipc_init(dev, skl); if (ret) return ret; -- cgit v0.10.2 From 5bc28b93a36e3cb3acc2870fb75cb6ffb182fece Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 9 Jun 2016 17:28:39 -0400 Subject: power_supply: power_supply_read_temp only if use_cnt > 0 Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Cc: stable@vger.kernel.org Signed-off-by: Rhyland Klein Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 456987c..b13cd07 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -565,11 +565,12 @@ static int power_supply_read_temp(struct thermal_zone_device *tzd, WARN_ON(tzd == NULL); psy = tzd->devdata; - ret = psy->desc->get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &val); + if (ret) + return ret; /* Convert tenths of degree Celsius to milli degree Celsius. */ - if (!ret) - *temp = val.intval * 100; + *temp = val.intval * 100; return ret; } @@ -612,10 +613,12 @@ static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } @@ -628,10 +631,12 @@ static int ps_get_cur_chrage_cntl_limit(struct thermal_cooling_device *tcd, int ret; psy = tcd->devdata; - ret = psy->desc->get_property(psy, - POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); - if (!ret) - *state = val.intval; + ret = power_supply_get_property(psy, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val); + if (ret) + return ret; + + *state = val.intval; return ret; } -- cgit v0.10.2 From fdecf36fcefa9f48c2f2de21c8176f1a8ce2c960 Mon Sep 17 00:00:00 2001 From: Clemens Gruber Date: Sat, 11 Jun 2016 17:21:26 +0200 Subject: phy: marvell: fix LED configuration via marvell,reg-init Configuring the PHY LED registers for the Marvell 88E1510 and others is not possible, because regardless of the values in marvell,reg-init, it is later overridden in m88e1121_config_aneg with a non-standard default. This patch moves that default configuration to .config_init to allow setting the LED configuration through marvell,reg-init in the device tree, which should override said default if it exists. Signed-off-by: Clemens Gruber Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 280e879..79ccc11 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -407,15 +407,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - - phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); - phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); - - err = genphy_config_aneg(phydev); - - return err; + return genphy_config_aneg(phydev); } static int m88e1318_config_aneg(struct phy_device *phydev) @@ -636,6 +628,28 @@ static int m88e1111_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BMCR, BMCR_RESET); } +static int m88e1121_config_init(struct phy_device *phydev) +{ + int err, oldpage; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL, + MII_88E1121_PHY_LED_DEF); + if (err < 0) + return err; + + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + + /* Set marvell,reg-init configuration from device tree */ + return marvell_config_init(phydev); +} + static int m88e1510_config_init(struct phy_device *phydev) { int err; @@ -668,7 +682,7 @@ static int m88e1510_config_init(struct phy_device *phydev) return err; } - return marvell_config_init(phydev); + return m88e1121_config_init(phydev); } static int m88e1118_config_aneg(struct phy_device *phydev) @@ -1196,7 +1210,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -1215,7 +1229,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1318_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, -- cgit v0.10.2 From dcb94b88c09ce82a80e188d49bcffdc83ba215a6 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 11 Jun 2016 20:32:06 +0200 Subject: ipv6: fix endianness error in icmpv6_err IPv6 ping socket error handler doesn't correctly convert the new 32 bit mtu to host endianness before using. Cc: Lorenzo Colitti Fixes: 6d0bfe22611602f ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Hannes Frederic Sowa Acked-by: Lorenzo Colitti Signed-off-by: David S. Miller diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 4527285..a4fa840 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -98,7 +98,7 @@ static void icmpv6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, if (!(type & ICMPV6_INFOMSG_MASK)) if (icmp6->icmp6_type == ICMPV6_ECHO_REQUEST) - ping_err(skb, offset, info); + ping_err(skb, offset, ntohl(info)); } static int icmpv6_rcv(struct sk_buff *skb); -- cgit v0.10.2 From 5119bd16815d3f0364390a1369392dcc036790e7 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 11 Jun 2016 20:41:38 +0200 Subject: ipv6: tcp: fix endianness annotation in tcp_v6_send_response Cc: Florent Fourcot Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index f36c2d0..2255d2b 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -738,7 +738,7 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = { static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 tsval, u32 tsecr, int oif, struct tcp_md5sig_key *key, int rst, - u8 tclass, u32 label) + u8 tclass, __be32 label) { const struct tcphdr *th = tcp_hdr(skb); struct tcphdr *t1; @@ -911,7 +911,7 @@ out: static void tcp_v6_send_ack(const struct sock *sk, struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 tsval, u32 tsecr, int oif, struct tcp_md5sig_key *key, u8 tclass, - u32 label) + __be32 label) { tcp_v6_send_response(sk, skb, seq, ack, win, tsval, tsecr, oif, key, 0, tclass, label); -- cgit v0.10.2 From c148d16369ff0095eca950d17968ba1d56a47b53 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 11 Jun 2016 21:15:37 +0200 Subject: ipv6: fix checksum annotation in udp6_csum_init Cc: Tom Herbert Fixes: 4068579e1e098fa ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6") Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_checksum.c b/net/ipv6/ip6_checksum.c index b2025bf..c0cbcb2 100644 --- a/net/ipv6/ip6_checksum.c +++ b/net/ipv6/ip6_checksum.c @@ -78,9 +78,12 @@ int udp6_csum_init(struct sk_buff *skb, struct udphdr *uh, int proto) * we accept a checksum of zero here. When we find the socket * for the UDP packet we'll check if that socket allows zero checksum * for IPv6 (set by socket option). + * + * Note, we are only interested in != 0 or == 0, thus the + * force to int. */ - return skb_checksum_init_zero_check(skb, proto, uh->check, - ip6_compute_pseudo); + return (__force int)skb_checksum_init_zero_check(skb, proto, uh->check, + ip6_compute_pseudo); } EXPORT_SYMBOL(udp6_csum_init); -- cgit v0.10.2 From b46d9f625b07f843c706c2c7d0210a90ccdf143b Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sun, 12 Jun 2016 12:02:46 +0200 Subject: ipv4: fix checksum annotation in udp4_csum_init Reported-by: Cong Wang Cc: Cong Wang Cc: Tom Herbert Fixes: 4068579e1e098fa ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6") Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 0ff31d9..ba0d8b8 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1755,8 +1755,11 @@ static inline int udp4_csum_init(struct sk_buff *skb, struct udphdr *uh, return err; } - return skb_checksum_init_zero_check(skb, proto, uh->check, - inet_compute_pseudo); + /* Note, we are only interested in != 0 or == 0, thus the + * force to int. + */ + return (__force int)skb_checksum_init_zero_check(skb, proto, uh->check, + inet_compute_pseudo); } /* -- cgit v0.10.2 From 881d0327db37ad917a367c77aff1afa1ee41e0a9 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Sun, 12 Jun 2016 17:36:37 +0800 Subject: net: alx: Work around the DMA RX overflow issue Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow issue. But from debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. So one idea is instead of adding a new allocator, why not just hitting the right target by avaiding the error-prone DMA address? This patch will actually * Remove the commit 26c5f03 * Apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. In theory this method should also apply to atl1c driver, which I can't find anyone who can help to test on real devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Signed-off-by: Feng Tang Suggested-by: Eric Dumazet Tested-by: Ole Lukoie Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index d02c424..8fc93c5 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -96,10 +96,6 @@ struct alx_priv { unsigned int rx_ringsz; unsigned int rxbuf_size; - struct page *rx_page; - unsigned int rx_page_offset; - unsigned int rx_frag_size; - struct napi_struct napi; struct alx_tx_queue txq; struct alx_rx_queue rxq; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c98acdc..e708e36 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -70,35 +70,6 @@ static void alx_free_txbuf(struct alx_priv *alx, int entry) } } -static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp) -{ - struct sk_buff *skb; - struct page *page; - - if (alx->rx_frag_size > PAGE_SIZE) - return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); - - page = alx->rx_page; - if (!page) { - alx->rx_page = page = alloc_page(gfp); - if (unlikely(!page)) - return NULL; - alx->rx_page_offset = 0; - } - - skb = build_skb(page_address(page) + alx->rx_page_offset, - alx->rx_frag_size); - if (likely(skb)) { - alx->rx_page_offset += alx->rx_frag_size; - if (alx->rx_page_offset >= PAGE_SIZE) - alx->rx_page = NULL; - else - get_page(page); - } - return skb; -} - - static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) { struct alx_rx_queue *rxq = &alx->rxq; @@ -115,9 +86,22 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) while (!cur_buf->skb && next != rxq->read_idx) { struct alx_rfd *rfd = &rxq->rfd[cur]; - skb = alx_alloc_skb(alx, gfp); + /* + * When DMA RX address is set to something like + * 0x....fc0, it will be very likely to cause DMA + * RFD overflow issue. + * + * To work around it, we apply rx skb with 64 bytes + * longer space, and offset the address whenever + * 0x....fc0 is detected. + */ + skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size + 64, gfp); if (!skb) break; + + if (((unsigned long)skb->data & 0xfff) == 0xfc0) + skb_reserve(skb, 64); + dma = dma_map_single(&alx->hw.pdev->dev, skb->data, alx->rxbuf_size, DMA_FROM_DEVICE); @@ -153,7 +137,6 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); } - return count; } @@ -622,11 +605,6 @@ static void alx_free_rings(struct alx_priv *alx) kfree(alx->txq.bufs); kfree(alx->rxq.bufs); - if (alx->rx_page) { - put_page(alx->rx_page); - alx->rx_page = NULL; - } - dma_free_coherent(&alx->hw.pdev->dev, alx->descmem.size, alx->descmem.virt, @@ -681,7 +659,6 @@ static int alx_request_irq(struct alx_priv *alx) alx->dev->name, alx); if (!err) goto out; - /* fall back to legacy interrupt */ pci_disable_msi(alx->hw.pdev); } @@ -725,7 +702,6 @@ static int alx_init_sw(struct alx_priv *alx) struct pci_dev *pdev = alx->hw.pdev; struct alx_hw *hw = &alx->hw; int err; - unsigned int head_size; err = alx_identify_hw(alx); if (err) { @@ -741,12 +717,7 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; - alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); - alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -848,7 +819,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) { struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); - unsigned int head_size; if ((max_frame < ALX_MIN_FRAME_SIZE) || (max_frame > ALX_MAX_FRAME_SIZE)) @@ -860,9 +830,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); - head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - alx->rx_frag_size = roundup_pow_of_two(head_size); netdev_update_features(netdev); if (netif_running(netdev)) alx_reinit(alx); -- cgit v0.10.2 From 6c0d54f1897d229748d4f41ef919078db6db2123 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 12 Jun 2016 20:01:25 -0700 Subject: net_sched: fix pfifo_head_drop behavior vs backlog When the qdisc is full, we drop a packet at the head of the queue, queue the current skb and return NET_XMIT_CN Now we track backlog on upper qdiscs, we need to call qdisc_tree_reduce_backlog(), even if the qlen did not change. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet Cc: WANG Cong Cc: Jamal Hadi Salim Acked-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c index 2177eac..2e4bd2c 100644 --- a/net/sched/sch_fifo.c +++ b/net/sched/sch_fifo.c @@ -37,14 +37,18 @@ static int pfifo_enqueue(struct sk_buff *skb, struct Qdisc *sch) static int pfifo_tail_enqueue(struct sk_buff *skb, struct Qdisc *sch) { + unsigned int prev_backlog; + if (likely(skb_queue_len(&sch->q) < sch->limit)) return qdisc_enqueue_tail(skb, sch); + prev_backlog = sch->qstats.backlog; /* queue full, remove one skb to fulfill the limit */ __qdisc_queue_drop_head(sch, &sch->q); qdisc_qstats_drop(sch); qdisc_enqueue_tail(skb, sch); + qdisc_tree_reduce_backlog(sch, 0, prev_backlog - sch->qstats.backlog); return NET_XMIT_CN; } -- cgit v0.10.2 From d1e37288c9146dccff830e3253e403af8705b51f Mon Sep 17 00:00:00 2001 From: "Su, Xuemin" Date: Mon, 13 Jun 2016 11:02:50 +0800 Subject: udp reuseport: fix packet of same flow hashed to different socket There is a corner case in which udp packets belonging to a same flow are hashed to different socket when hslot->count changes from 10 to 11: 1) When hslot->count <= 10, __udp_lib_lookup() searches udp_table->hash, and always passes 'daddr' to udp_ehashfn(). 2) When hslot->count > 10, __udp_lib_lookup() searches udp_table->hash2, but may pass 'INADDR_ANY' to udp_ehashfn() if the sockets are bound to INADDR_ANY instead of some specific addr. That means when hslot->count changes from 10 to 11, the hash calculated by udp_ehashfn() is also changed, and the udp packets belonging to a same flow will be hashed to different socket. This is easily reproduced: 1) Create 10 udp sockets and bind all of them to 0.0.0.0:40000. 2) From the same host send udp packets to 127.0.0.1:40000, record the socket index which receives the packets. 3) Create 1 more udp socket and bind it to 0.0.0.0:44096. The number 44096 is 40000 + UDP_HASH_SIZE(4096), this makes the new socket put into the same hslot as the aformentioned 10 sockets, and makes the hslot->count change from 10 to 11. 4) From the same host send udp packets to 127.0.0.1:40000, and the socket index which receives the packets will be different from the one received in step 2. This should not happen as the socket bound to 0.0.0.0:44096 should not change the behavior of the sockets bound to 0.0.0.0:40000. It's the same case for IPv6, and this patch also fixes that. Signed-off-by: Su, Xuemin Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ba0d8b8..ca5e8ea 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -391,9 +391,9 @@ int udp_v4_get_port(struct sock *sk, unsigned short snum) return udp_lib_get_port(sk, snum, ipv4_rcv_saddr_equal, hash2_nulladdr); } -static inline int compute_score(struct sock *sk, struct net *net, - __be32 saddr, unsigned short hnum, __be16 sport, - __be32 daddr, __be16 dport, int dif) +static int compute_score(struct sock *sk, struct net *net, + __be32 saddr, __be16 sport, + __be32 daddr, unsigned short hnum, int dif) { int score; struct inet_sock *inet; @@ -434,52 +434,6 @@ static inline int compute_score(struct sock *sk, struct net *net, return score; } -/* - * In this second variant, we check (daddr, dport) matches (inet_rcv_sadd, inet_num) - */ -static inline int compute_score2(struct sock *sk, struct net *net, - __be32 saddr, __be16 sport, - __be32 daddr, unsigned int hnum, int dif) -{ - int score; - struct inet_sock *inet; - - if (!net_eq(sock_net(sk), net) || - ipv6_only_sock(sk)) - return -1; - - inet = inet_sk(sk); - - if (inet->inet_rcv_saddr != daddr || - inet->inet_num != hnum) - return -1; - - score = (sk->sk_family == PF_INET) ? 2 : 1; - - if (inet->inet_daddr) { - if (inet->inet_daddr != saddr) - return -1; - score += 4; - } - - if (inet->inet_dport) { - if (inet->inet_dport != sport) - return -1; - score += 4; - } - - if (sk->sk_bound_dev_if) { - if (sk->sk_bound_dev_if != dif) - return -1; - score += 4; - } - - if (sk->sk_incoming_cpu == raw_smp_processor_id()) - score++; - - return score; -} - static u32 udp_ehashfn(const struct net *net, const __be32 laddr, const __u16 lport, const __be32 faddr, const __be16 fport) @@ -492,11 +446,11 @@ static u32 udp_ehashfn(const struct net *net, const __be32 laddr, udp_ehash_secret + net_hash_mix(net)); } -/* called with read_rcu_lock() */ +/* called with rcu_read_lock() */ static struct sock *udp4_lib_lookup2(struct net *net, __be32 saddr, __be16 sport, __be32 daddr, unsigned int hnum, int dif, - struct udp_hslot *hslot2, unsigned int slot2, + struct udp_hslot *hslot2, struct sk_buff *skb) { struct sock *sk, *result; @@ -506,7 +460,7 @@ static struct sock *udp4_lib_lookup2(struct net *net, result = NULL; badness = 0; udp_portaddr_for_each_entry_rcu(sk, &hslot2->head) { - score = compute_score2(sk, net, saddr, sport, + score = compute_score(sk, net, saddr, sport, daddr, hnum, dif); if (score > badness) { reuseport = sk->sk_reuseport; @@ -554,17 +508,22 @@ struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr, result = udp4_lib_lookup2(net, saddr, sport, daddr, hnum, dif, - hslot2, slot2, skb); + hslot2, skb); if (!result) { + unsigned int old_slot2 = slot2; hash2 = udp4_portaddr_hash(net, htonl(INADDR_ANY), hnum); slot2 = hash2 & udptable->mask; + /* avoid searching the same slot again. */ + if (unlikely(slot2 == old_slot2)) + return result; + hslot2 = &udptable->hash2[slot2]; if (hslot->count < hslot2->count) goto begin; result = udp4_lib_lookup2(net, saddr, sport, - htonl(INADDR_ANY), hnum, dif, - hslot2, slot2, skb); + daddr, hnum, dif, + hslot2, skb); } return result; } @@ -572,8 +531,8 @@ begin: result = NULL; badness = 0; sk_for_each_rcu(sk, &hslot->head) { - score = compute_score(sk, net, saddr, hnum, sport, - daddr, dport, dif); + score = compute_score(sk, net, saddr, sport, + daddr, hnum, dif); if (score > badness) { reuseport = sk->sk_reuseport; if (reuseport) { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index f421c9f..005dc82 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -115,11 +115,10 @@ static void udp_v6_rehash(struct sock *sk) udp_lib_rehash(sk, new_hash); } -static inline int compute_score(struct sock *sk, struct net *net, - unsigned short hnum, - const struct in6_addr *saddr, __be16 sport, - const struct in6_addr *daddr, __be16 dport, - int dif) +static int compute_score(struct sock *sk, struct net *net, + const struct in6_addr *saddr, __be16 sport, + const struct in6_addr *daddr, unsigned short hnum, + int dif) { int score; struct inet_sock *inet; @@ -162,54 +161,11 @@ static inline int compute_score(struct sock *sk, struct net *net, return score; } -static inline int compute_score2(struct sock *sk, struct net *net, - const struct in6_addr *saddr, __be16 sport, - const struct in6_addr *daddr, - unsigned short hnum, int dif) -{ - int score; - struct inet_sock *inet; - - if (!net_eq(sock_net(sk), net) || - udp_sk(sk)->udp_port_hash != hnum || - sk->sk_family != PF_INET6) - return -1; - - if (!ipv6_addr_equal(&sk->sk_v6_rcv_saddr, daddr)) - return -1; - - score = 0; - inet = inet_sk(sk); - - if (inet->inet_dport) { - if (inet->inet_dport != sport) - return -1; - score++; - } - - if (!ipv6_addr_any(&sk->sk_v6_daddr)) { - if (!ipv6_addr_equal(&sk->sk_v6_daddr, saddr)) - return -1; - score++; - } - - if (sk->sk_bound_dev_if) { - if (sk->sk_bound_dev_if != dif) - return -1; - score++; - } - - if (sk->sk_incoming_cpu == raw_smp_processor_id()) - score++; - - return score; -} - -/* called with read_rcu_lock() */ +/* called with rcu_read_lock() */ static struct sock *udp6_lib_lookup2(struct net *net, const struct in6_addr *saddr, __be16 sport, const struct in6_addr *daddr, unsigned int hnum, int dif, - struct udp_hslot *hslot2, unsigned int slot2, + struct udp_hslot *hslot2, struct sk_buff *skb) { struct sock *sk, *result; @@ -219,7 +175,7 @@ static struct sock *udp6_lib_lookup2(struct net *net, result = NULL; badness = -1; udp_portaddr_for_each_entry_rcu(sk, &hslot2->head) { - score = compute_score2(sk, net, saddr, sport, + score = compute_score(sk, net, saddr, sport, daddr, hnum, dif); if (score > badness) { reuseport = sk->sk_reuseport; @@ -268,17 +224,22 @@ struct sock *__udp6_lib_lookup(struct net *net, result = udp6_lib_lookup2(net, saddr, sport, daddr, hnum, dif, - hslot2, slot2, skb); + hslot2, skb); if (!result) { + unsigned int old_slot2 = slot2; hash2 = udp6_portaddr_hash(net, &in6addr_any, hnum); slot2 = hash2 & udptable->mask; + /* avoid searching the same slot again. */ + if (unlikely(slot2 == old_slot2)) + return result; + hslot2 = &udptable->hash2[slot2]; if (hslot->count < hslot2->count) goto begin; result = udp6_lib_lookup2(net, saddr, sport, - &in6addr_any, hnum, dif, - hslot2, slot2, skb); + daddr, hnum, dif, + hslot2, skb); } return result; } @@ -286,7 +247,7 @@ begin: result = NULL; badness = -1; sk_for_each_rcu(sk, &hslot->head) { - score = compute_score(sk, net, hnum, saddr, sport, daddr, dport, dif); + score = compute_score(sk, net, saddr, sport, daddr, hnum, dif); if (score > badness) { reuseport = sk->sk_reuseport; if (reuseport) { -- cgit v0.10.2 From 106da663ff495e0aea3ac15b8317aa410754fcac Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:04 +0200 Subject: ovs/gre,geneve: fix error path when creating an iface After ipgre_newlink()/geneve_configure() call, the netdev is registered. Fixes: 7e059158d57b ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices") CC: David Wragg Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index cadefe4..086c2da 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1508,6 +1508,7 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); int err; memset(tb, 0, sizeof(tb)); @@ -1519,8 +1520,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, err = geneve_configure(net, dev, &geneve_remote_unspec, 0, 0, 0, 0, htons(dst_port), true, GENEVE_F_UDP_ZERO_CSUM6_RX); - if (err) - goto err; + if (err) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1532,7 +1535,8 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, return dev; err: - free_netdev(dev); + geneve_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(geneve_dev_create_fb); diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 4d2025f..08deba6 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1121,6 +1121,7 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, { struct nlattr *tb[IFLA_MAX + 1]; struct net_device *dev; + LIST_HEAD(list_kill); struct ip_tunnel *t; int err; @@ -1136,8 +1137,10 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, t->collect_md = true; err = ipgre_newlink(net, dev, tb, NULL); - if (err < 0) - goto out; + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } /* openvswitch users expect packet sizes to be unrestricted, * so set the largest MTU we can. @@ -1148,7 +1151,8 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, return dev; out: - free_netdev(dev); + ip_tunnel_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); return ERR_PTR(err); } EXPORT_SYMBOL_GPL(gretap_fb_dev_create); -- cgit v0.10.2 From cf5da330bbdd0c06b05c525a3d1d58ccd82c87a6 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:05 +0200 Subject: ovs/vxlan: fix rtnl notifications on iface deletion The function vxlan_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Note that the function vxlan_dev_create() is moved after the rtnl stuff so that vxlan_dellink() can be called in this function. Fixes: dcc38c033b32 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN") CC: Thomas Graf CC: Pravin B Shelar Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f999db2..b3b9db6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2952,30 +2952,6 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, return 0; } -struct net_device *vxlan_dev_create(struct net *net, const char *name, - u8 name_assign_type, struct vxlan_config *conf) -{ - struct nlattr *tb[IFLA_MAX+1]; - struct net_device *dev; - int err; - - memset(&tb, 0, sizeof(tb)); - - dev = rtnl_create_link(net, name, name_assign_type, - &vxlan_link_ops, tb); - if (IS_ERR(dev)) - return dev; - - err = vxlan_dev_configure(net, dev, conf); - if (err < 0) { - free_netdev(dev); - return ERR_PTR(err); - } - - return dev; -} -EXPORT_SYMBOL_GPL(vxlan_dev_create); - static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { @@ -3268,6 +3244,40 @@ static struct rtnl_link_ops vxlan_link_ops __read_mostly = { .get_link_net = vxlan_get_link_net, }; +struct net_device *vxlan_dev_create(struct net *net, const char *name, + u8 name_assign_type, + struct vxlan_config *conf) +{ + struct nlattr *tb[IFLA_MAX + 1]; + struct net_device *dev; + int err; + + memset(&tb, 0, sizeof(tb)); + + dev = rtnl_create_link(net, name, name_assign_type, + &vxlan_link_ops, tb); + if (IS_ERR(dev)) + return dev; + + err = vxlan_dev_configure(net, dev, conf); + if (err < 0) { + free_netdev(dev); + return ERR_PTR(err); + } + + err = rtnl_configure_link(dev, NULL); + if (err < 0) { + LIST_HEAD(list_kill); + + vxlan_dellink(dev, &list_kill); + unregister_netdevice_many(&list_kill); + return ERR_PTR(err); + } + + return dev; +} +EXPORT_SYMBOL_GPL(vxlan_dev_create); + static void vxlan_handle_lowerdev_unregister(struct vxlan_net *vn, struct net_device *dev) { -- cgit v0.10.2 From da6f1da819d4b9c081a477dec74dc468a0b44290 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:06 +0200 Subject: ovs/gre: fix rtnl notifications on iface deletion The function gretap_fb_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: b2acd1dc3949 ("openvswitch: Use regular GRE net_device instead of vport") CC: Thomas Graf CC: Pravin B Shelar Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 08deba6..07c5cf1 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1149,6 +1149,10 @@ struct net_device *gretap_fb_dev_create(struct net *net, const char *name, if (err) goto out; + err = rtnl_configure_link(dev, NULL); + if (err < 0) + goto out; + return dev; out: ip_tunnel_dellink(dev, &list_kill); -- cgit v0.10.2 From 41009481b690493c169ce85f591b9d32c6fd9422 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 13 Jun 2016 10:31:07 +0200 Subject: ovs/geneve: fix rtnl notifications on iface deletion The function geneve_dev_create_fb() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") CC: Pravin B Shelar CC: Jesse Gross CC: Thomas Graf Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 086c2da..305a04e 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1532,6 +1532,10 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, if (err) goto err; + err = rtnl_configure_link(dev, NULL); + if (err < 0) + goto err; + return dev; err: -- cgit v0.10.2 From 43160ffd12c8d1d331362362eea3c70e04b6f9c4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 15 Jun 2016 10:21:34 +0800 Subject: regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed Use regulator_list_voltage_linear_range in rpm_smps_ldo_ops_fixed is wrong because it is used for fixed regulator without any linear range. The rpm_smps_ldo_ops_fixed is used for pm8941_lnldo which has fixed_uV set and n_voltages = 1. In this case, regulator_list_voltage() can return rdev->desc->fixed_uV without .list_voltage implementation. Fixes: 3bfbb4d1a480 ("regulator: qcom_smd: add list_voltage callback") Signed-off-by: Axel Lin Signed-off-by: Mark Brown diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 526bf23..6c7fe477 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -152,7 +152,6 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, - .list_voltage = regulator_list_voltage_linear_range, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, -- cgit v0.10.2 From 775711497202fe376368c25b0c7296ed8803e0ba Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 10 Jun 2016 17:25:19 +0200 Subject: netfilter: conntrack: destroy kmemcache on module removal I forgot to move the kmem_cache_destroy into the exit path. Fixes: 0c5366b3a8c7 ("netfilter: conntrack: use single slab cache) Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index db2312e..f204274 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1544,6 +1544,8 @@ void nf_conntrack_cleanup_end(void) nf_conntrack_tstamp_fini(); nf_conntrack_acct_fini(); nf_conntrack_expect_fini(); + + kmem_cache_destroy(nf_conntrack_cachep); } /* -- cgit v0.10.2 From a46844021f6182cca7b575295ba33a4734b1b9d9 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 11 Jun 2016 12:20:26 +0800 Subject: netfilter: nf_tables: fix wrong check of NFT_SET_MAP in nf_tables_bind_set We should check "i" is used as a dictionary or not, "binding" is already checked before. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7b7aa87..492f6f8 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2946,7 +2946,7 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set, * jumps are already validated for that chain. */ list_for_each_entry(i, &set->bindings, list) { - if (binding->flags & NFT_SET_MAP && + if (i->flags & NFT_SET_MAP && i->chain == binding->chain) goto bind; } -- cgit v0.10.2 From 8588ac097b49ce8802f11541d9cd6f6667badb34 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 11 Jun 2016 12:20:27 +0800 Subject: netfilter: nf_tables: reject loops from set element jump to chain Liping Zhang says: "Users may add such a wrong nft rules successfully, which will cause an endless jump loop: # nft add rule filter test tcp dport vmap {1: jump test} This is because before we commit, the element in the current anonymous set is inactive, so osp->walk will skip this element and miss the validate check." To resolve this problem, this patch passes the generation mask to the walk function through the iter container structure depending on the code path: 1) If we're dumping the elements, then we have to check if the element is active in the current generation. Thus, we check for the current bit in the genmask. 2) If we're checking for loops, then we have to check if the element is active in the next generation, as we're in the middle of a transaction. Thus, we check for the next bit in the genmask. Based on original patch from Liping Zhang. Reported-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso Tested-by: Liping Zhang diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 0922354..f7c291f 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -167,6 +167,7 @@ struct nft_set_elem { struct nft_set; struct nft_set_iter { + u8 genmask; unsigned int count; unsigned int skip; int err; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 492f6f8..0fd6998 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2951,6 +2951,7 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set, goto bind; } + iter.genmask = nft_genmask_next(ctx->net); iter.skip = 0; iter.count = 0; iter.err = 0; @@ -3192,12 +3193,13 @@ static int nf_tables_dump_set(struct sk_buff *skb, struct netlink_callback *cb) if (nest == NULL) goto nla_put_failure; - args.cb = cb; - args.skb = skb; - args.iter.skip = cb->args[0]; - args.iter.count = 0; - args.iter.err = 0; - args.iter.fn = nf_tables_dump_setelem; + args.cb = cb; + args.skb = skb; + args.iter.genmask = nft_genmask_cur(ctx.net); + args.iter.skip = cb->args[0]; + args.iter.count = 0; + args.iter.err = 0; + args.iter.fn = nf_tables_dump_setelem; set->ops->walk(&ctx, set, &args.iter); nla_nest_end(skb, nest); @@ -4284,6 +4286,7 @@ static int nf_tables_check_loops(const struct nft_ctx *ctx, binding->chain != chain) continue; + iter.genmask = nft_genmask_next(ctx->net); iter.skip = 0; iter.count = 0; iter.err = 0; diff --git a/net/netfilter/nft_hash.c b/net/netfilter/nft_hash.c index 6fa0165..f39c53a 100644 --- a/net/netfilter/nft_hash.c +++ b/net/netfilter/nft_hash.c @@ -189,7 +189,6 @@ static void nft_hash_walk(const struct nft_ctx *ctx, const struct nft_set *set, struct nft_hash_elem *he; struct rhashtable_iter hti; struct nft_set_elem elem; - u8 genmask = nft_genmask_cur(read_pnet(&set->pnet)); int err; err = rhashtable_walk_init(&priv->ht, &hti, GFP_KERNEL); @@ -218,7 +217,7 @@ static void nft_hash_walk(const struct nft_ctx *ctx, const struct nft_set *set, goto cont; if (nft_set_elem_expired(&he->ext)) goto cont; - if (!nft_set_elem_active(&he->ext, genmask)) + if (!nft_set_elem_active(&he->ext, iter->genmask)) goto cont; elem.priv = he; diff --git a/net/netfilter/nft_rbtree.c b/net/netfilter/nft_rbtree.c index f762094..7201d57 100644 --- a/net/netfilter/nft_rbtree.c +++ b/net/netfilter/nft_rbtree.c @@ -211,7 +211,6 @@ static void nft_rbtree_walk(const struct nft_ctx *ctx, struct nft_rbtree_elem *rbe; struct nft_set_elem elem; struct rb_node *node; - u8 genmask = nft_genmask_cur(read_pnet(&set->pnet)); spin_lock_bh(&nft_rbtree_lock); for (node = rb_first(&priv->root); node != NULL; node = rb_next(node)) { @@ -219,7 +218,7 @@ static void nft_rbtree_walk(const struct nft_ctx *ctx, if (iter->count < iter->skip) goto cont; - if (!nft_set_elem_active(&rbe->ext, genmask)) + if (!nft_set_elem_active(&rbe->ext, iter->genmask)) goto cont; elem.priv = rbe; -- cgit v0.10.2 From a02f424863610a0a7abd80c468839e59cfa4d0d8 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 11 Jun 2016 12:20:28 +0800 Subject: netfilter: nf_tables: fix wrong destroy anonymous sets if binding fails When we add a nft rule like follows: # nft add rule filter test tcp dport vmap {1: jump test} -ELOOP error will be returned, and the anonymous set will be destroyed. But after that, nf_tables_abort will also try to remove the element and destroy the set, which was already destroyed and freed. If we add a nft wrong rule, nft_tables_abort will do the cleanup work rightly, so nf_tables_set_destroy call here is redundant and wrong, remove it. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 0fd6998..2c88187 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2958,13 +2958,8 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set, iter.fn = nf_tables_bind_check_setelem; set->ops->walk(ctx, set, &iter); - if (iter.err < 0) { - /* Destroy anonymous sets if binding fails */ - if (set->flags & NFT_SET_ANONYMOUS) - nf_tables_set_destroy(ctx, set); - + if (iter.err < 0) return iter.err; - } } bind: binding->chain = ctx->chain; -- cgit v0.10.2 From 8fff1722f705ce5023a0d6d77a31a9d013be2a34 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Tue, 14 Jun 2016 20:13:04 +0800 Subject: netfilter: nf_tables: fix a wrong check to skip the inactive rules nft_genmask_cur has already done left-shift operator on the gencursor, so there's no need to do left-shift operator on it again. Fixes: ea4bd995b0f2 ("netfilter: nf_tables: add transaction helper functions") Cc: Patrick McHardy Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_core.c b/net/netfilter/nf_tables_core.c index e9f8dff..fb8b589 100644 --- a/net/netfilter/nf_tables_core.c +++ b/net/netfilter/nf_tables_core.c @@ -143,7 +143,7 @@ next_rule: list_for_each_entry_continue_rcu(rule, &chain->rules, list) { /* This rule is not active, skip. */ - if (unlikely(rule->genmask & (1 << gencursor))) + if (unlikely(rule->genmask & gencursor)) continue; rulenum++; -- cgit v0.10.2 From f52a4c74efbb61195490535e9d65d964c4ebfee3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 14 Jun 2016 00:26:49 +0000 Subject: ata: fix return value check in ahci_seattle_get_port_info() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Acked-by: Brijesh Singh Signed-off-by: Tejun Heo diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c index 6e702ab..1d31c0c 100644 --- a/drivers/ata/ahci_seattle.c +++ b/drivers/ata/ahci_seattle.c @@ -137,7 +137,7 @@ static const struct ata_port_info *ahci_seattle_get_port_info( u32 val; plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL); - if (IS_ERR(plat_data)) + if (!plat_data) return &ahci_port_info; plat_data->sgpio_ctrl = devm_ioremap_resource(dev, -- cgit v0.10.2 From 0c5ddb51e8f7be7170600f95a4ea92e5a32afad8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Jun 2016 07:50:25 -0700 Subject: net/mlx4_en: initialize cmd.context_lock spinlock earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maciej Żenczykowski reported lockdep warning a spinlock was not registered before being held in mlx4_cmd_wake_completions() cmd.context_lock initialization is not at the right place. 1) mlx4_cmd_use_events() can be called multiple times. Calling spin_lock_init() on a live spinlock can lead to hangs. 2) mlx4_cmd_wake_completions() can be called while lock has not been initialized. Lockdep complains, and current logic is not race prone. It seems better to move the initialization earlier in mlx4_load_one() Signed-off-by: Eric Dumazet Reported-by: Maciej Żenczykowski Cc: Eugenia Emantayev Cc: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index e94ca1c..f04a423 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2597,7 +2597,6 @@ int mlx4_cmd_use_events(struct mlx4_dev *dev) priv->cmd.free_head = 0; sema_init(&priv->cmd.event_sem, priv->cmd.max_cmds); - spin_lock_init(&priv->cmd.context_lock); for (priv->cmd.token_mask = 1; priv->cmd.token_mask < priv->cmd.max_cmds; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 12c77a7..372ebfa 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -3222,6 +3222,7 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data, INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); + spin_lock_init(&priv->cmd.context_lock); INIT_LIST_HEAD(&priv->bf_list); mutex_init(&priv->bf_mutex); -- cgit v0.10.2 From 3d7c8257d999bdf8fa77ffd9be775c7b58cc7b69 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Jun 2016 11:33:32 -0700 Subject: net_sched: prio: insure proper transactional behavior Now prio_init() can return -ENOMEM, it also has to make sure any allocated qdiscs are freed, since the caller (qdisc_create()) wont call ->destroy() handler for us. More generally, we want a transactional behavior for "tc qdisc change ...", so prio_tune() should not make modifications if any error is returned. It means that we must validate parameters and allocate missing qdisc(s) before taking root qdisc lock exactly once, to not leave the prio qdisc in an intermediate state. Fixes: cbdf45116478 ("net_sched: prio: properly report out of memory errors") Signed-off-by: Eric Dumazet Reported-by: Cong Wang Acked-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 071718b..a356450 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -172,8 +172,9 @@ prio_destroy(struct Qdisc *sch) static int prio_tune(struct Qdisc *sch, struct nlattr *opt) { struct prio_sched_data *q = qdisc_priv(sch); + struct Qdisc *queues[TCQ_PRIO_BANDS]; + int oldbands = q->bands, i; struct tc_prio_qopt *qopt; - int i; if (nla_len(opt) < sizeof(*qopt)) return -EINVAL; @@ -187,54 +188,42 @@ static int prio_tune(struct Qdisc *sch, struct nlattr *opt) return -EINVAL; } + /* Before commit, make sure we can allocate all new qdiscs */ + for (i = oldbands; i < qopt->bands; i++) { + queues[i] = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, + TC_H_MAKE(sch->handle, i + 1)); + if (!queues[i]) { + while (i > oldbands) + qdisc_destroy(queues[--i]); + return -ENOMEM; + } + } + sch_tree_lock(sch); q->bands = qopt->bands; memcpy(q->prio2band, qopt->priomap, TC_PRIO_MAX+1); - for (i = q->bands; i < TCQ_PRIO_BANDS; i++) { + for (i = q->bands; i < oldbands; i++) { struct Qdisc *child = q->queues[i]; - q->queues[i] = &noop_qdisc; - if (child != &noop_qdisc) { - qdisc_tree_reduce_backlog(child, child->q.qlen, child->qstats.backlog); - qdisc_destroy(child); - } - } - sch_tree_unlock(sch); - for (i = 0; i < q->bands; i++) { - struct Qdisc *child; + qdisc_tree_reduce_backlog(child, child->q.qlen, + child->qstats.backlog); + qdisc_destroy(child); + } - if (q->queues[i] != &noop_qdisc) - continue; + for (i = oldbands; i < q->bands; i++) + q->queues[i] = queues[i]; - child = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, - TC_H_MAKE(sch->handle, i + 1)); - if (!child) - return -ENOMEM; - sch_tree_lock(sch); - q->queues[i] = child; - sch_tree_unlock(sch); - } + sch_tree_unlock(sch); return 0; } static int prio_init(struct Qdisc *sch, struct nlattr *opt) { - struct prio_sched_data *q = qdisc_priv(sch); - int i; - - for (i = 0; i < TCQ_PRIO_BANDS; i++) - q->queues[i] = &noop_qdisc; - - if (opt == NULL) { + if (!opt) return -EINVAL; - } else { - int err; - if ((err = prio_tune(sch, opt)) != 0) - return err; - } - return 0; + return prio_tune(sch, opt); } static int prio_dump(struct Qdisc *sch, struct sk_buff *skb) -- cgit v0.10.2 From d15eccea69b96a5116169688dcc9baf6d1ce2751 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 13 Jun 2016 13:44:14 -0700 Subject: act_ipt: fix a bind refcnt leak And avoid calling tcf_hash_check() twice. Fixes: a57f19d30b2d ("net sched: ipt action fix late binding") Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index 9f002ad..d4bd19e 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -121,10 +121,13 @@ static int __tcf_ipt_init(struct tc_action_net *tn, struct nlattr *nla, } td = (struct xt_entry_target *)nla_data(tb[TCA_IPT_TARG]); - if (nla_len(tb[TCA_IPT_TARG]) < td->u.target_size) + if (nla_len(tb[TCA_IPT_TARG]) < td->u.target_size) { + if (exists) + tcf_hash_release(a, bind); return -EINVAL; + } - if (!tcf_hash_check(tn, index, a, bind)) { + if (!exists) { ret = tcf_hash_create(tn, index, est, a, sizeof(*ipt), bind, false); if (ret) -- cgit v0.10.2 From ebecaa6662b0a9c3590bd644a4cec6f9d96818b7 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Mon, 13 Jun 2016 18:08:42 -0400 Subject: net sched actions: bug fix dumping actions directly didnt produce NLMSG_DONE This refers to commands to direct action access as follows: sudo tc actions add action drop index 12 sudo tc actions add action pipe index 10 And then dumping them like so: sudo tc actions ls action gact iproute2 worked because it depended on absence of TCA_ACT_TAB TLV as end of message. This fix has been tested with iproute2 and is backward compatible. Signed-off-by: Jamal Hadi Salim Acked-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 336774a..c7a0b0d 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -1118,7 +1118,7 @@ tc_dump_action(struct sk_buff *skb, struct netlink_callback *cb) nla_nest_end(skb, nest); ret = skb->len; } else - nla_nest_cancel(skb, nest); + nlmsg_trim(skb, b); nlh->nlmsg_len = skb_tail_pointer(skb) - b; if (NETLINK_CB(cb->skb).portid && ret) -- cgit v0.10.2 From 0ee13627f963f9c5c9544ed19d82854836d5e676 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 14 Jun 2016 06:16:27 +0200 Subject: htb: call qdisc_root with rcu read lock held saw a debug splat: net/include/net/sch_generic.h:287 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by kworker/2:1/710: #0: ("events"){.+.+.+}, at: [] #1: ((&q->work)){+.+...}, at: [] process_one_work+0x14d/0x690 Workqueue: events htb_work_func Call Trace: [] dump_stack+0x85/0xc2 [] lockdep_rcu_suspicious+0xe7/0x120 [] htb_work_func+0x67/0x70 Signed-off-by: Florian Westphal Acked-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index d4b4218..62f9d81 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1007,7 +1007,9 @@ static void htb_work_func(struct work_struct *work) struct htb_sched *q = container_of(work, struct htb_sched, work); struct Qdisc *sch = q->watchdog.qdisc; + rcu_read_lock(); __netif_schedule(qdisc_root(sch)); + rcu_read_unlock(); } static int htb_init(struct Qdisc *sch, struct nlattr *opt) -- cgit v0.10.2 From b196c22af5c3ff784c472c80f6fb4e5fad67b2ac Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:14 +0200 Subject: macsec: add rcu_barrier() on module exit Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 47ee2c8..e80736f 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3361,6 +3361,7 @@ static void __exit macsec_exit(void) genl_unregister_family(&macsec_fam); rtnl_link_unregister(&macsec_link_ops); unregister_netdevice_notifier(&macsec_notifier); + rcu_barrier(); } module_init(macsec_init); -- cgit v0.10.2 From 5d9649b3a524df9ccd15ac25ad6591089260fdbd Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:15 +0200 Subject: macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index e80736f..189ea3e 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -605,12 +605,41 @@ static void macsec_encrypt_done(struct crypto_async_request *base, int err) dev_put(dev); } +static struct aead_request *macsec_alloc_req(struct crypto_aead *tfm, + unsigned char **iv, + struct scatterlist **sg) +{ + size_t size, iv_offset, sg_offset; + struct aead_request *req; + void *tmp; + + size = sizeof(struct aead_request) + crypto_aead_reqsize(tfm); + iv_offset = size; + size += GCM_AES_IV_LEN; + + size = ALIGN(size, __alignof__(struct scatterlist)); + sg_offset = size; + size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); + + tmp = kmalloc(size, GFP_ATOMIC); + if (!tmp) + return NULL; + + *iv = (unsigned char *)(tmp + iv_offset); + *sg = (struct scatterlist *)(tmp + sg_offset); + req = tmp; + + aead_request_set_tfm(req, tfm); + + return req; +} + static struct sk_buff *macsec_encrypt(struct sk_buff *skb, struct net_device *dev) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct ethhdr *eth; struct macsec_eth_header *hh; size_t unprotected_len; @@ -668,8 +697,6 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, macsec_fill_sectag(hh, secy, pn); macsec_set_shortlen(hh, unprotected_len - 2 * ETH_ALEN); - macsec_fill_iv(iv, secy->sci, pn); - skb_put(skb, secy->icv_len); if (skb->len - ETH_HLEN > macsec_priv(dev)->real_dev->mtu) { @@ -684,13 +711,15 @@ static struct sk_buff *macsec_encrypt(struct sk_buff *skb, return ERR_PTR(-EINVAL); } - req = aead_request_alloc(tx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(tx_sa->key.tfm, &iv, &sg); if (!req) { macsec_txsa_put(tx_sa); kfree_skb(skb); return ERR_PTR(-ENOMEM); } + macsec_fill_iv(iv, secy->sci, pn); + sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); @@ -861,7 +890,6 @@ static void macsec_decrypt_done(struct crypto_async_request *base, int err) out: macsec_rxsa_put(rx_sa); dev_put(dev); - return; } static struct sk_buff *macsec_decrypt(struct sk_buff *skb, @@ -871,8 +899,8 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, struct macsec_secy *secy) { int ret; - struct scatterlist sg[MAX_SKB_FRAGS + 1]; - unsigned char iv[GCM_AES_IV_LEN]; + struct scatterlist *sg; + unsigned char *iv; struct aead_request *req; struct macsec_eth_header *hdr; u16 icv_len = secy->icv_len; @@ -882,7 +910,7 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, if (!skb) return ERR_PTR(-ENOMEM); - req = aead_request_alloc(rx_sa->key.tfm, GFP_ATOMIC); + req = macsec_alloc_req(rx_sa->key.tfm, &iv, &sg); if (!req) { kfree_skb(skb); return ERR_PTR(-ENOMEM); -- cgit v0.10.2 From 6052f7fbce857e327218a9d8a040e210ea7cc718 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 14 Jun 2016 15:25:16 +0200 Subject: macsec: fix SA initialization The ASYNC flag prevents initialization on some physical machines. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 189ea3e..0e7eff7 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1262,7 +1262,7 @@ static struct crypto_aead *macsec_alloc_tfm(char *key, int key_len, int icv_len) struct crypto_aead *tfm; int ret; - tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC); + tfm = crypto_alloc_aead("gcm(aes)", 0, 0); if (!tfm || IS_ERR(tfm)) return NULL; -- cgit v0.10.2 From 66d95b6705a6347f7b2645e042874ec0bb03b726 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Wed, 15 Jun 2016 14:10:57 +0800 Subject: tipc: fix suspicious RCU usage When run tipcTS&tipcTC test suite, the following complaint appears: [ 56.926168] =============================== [ 56.926169] [ INFO: suspicious RCU usage. ] [ 56.926171] 4.7.0-rc1+ #160 Not tainted [ 56.926173] ------------------------------- [ 56.926174] net/tipc/bearer.c:408 suspicious rcu_dereference_protected() usage! [ 56.926175] [ 56.926175] other info that might help us debug this: [ 56.926175] [ 56.926177] [ 56.926177] rcu_scheduler_active = 1, debug_locks = 1 [ 56.926179] 3 locks held by swapper/4/0: [ 56.926180] #0: (((&req->timer))){+.-...}, at: [] call_timer_fn+0x5/0x340 [ 56.926203] #1: (&(&req->lock)->rlock){+.-...}, at: [] disc_timeout+0x1b/0xd0 [tipc] [ 56.926212] #2: (rcu_read_lock){......}, at: [] tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc] [ 56.926218] [ 56.926218] stack backtrace: [ 56.926221] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 4.7.0-rc1+ #160 [ 56.926222] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 56.926224] 0000000000000000 ffff880016803d28 ffffffff813c4423 ffff8800154252c0 [ 56.926227] 0000000000000001 ffff880016803d58 ffffffff810b7512 ffff8800124d8120 [ 56.926230] ffff880013f8a160 ffff8800132b5ccc ffff8800124d8120 ffff880016803d88 [ 56.926234] Call Trace: [ 56.926235] [] dump_stack+0x67/0x94 [ 56.926250] [] lockdep_rcu_suspicious+0xe2/0x120 [ 56.926256] [] tipc_l2_send_msg+0x131/0x1c0 [tipc] [ 56.926261] [] tipc_bearer_xmit_skb+0x14c/0x2e0 [tipc] [ 56.926266] [] ? tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc] [ 56.926273] [] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926278] [] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926283] [] disc_timeout+0x56/0xd0 [tipc] [ 56.926288] [] call_timer_fn+0xb8/0x340 [ 56.926291] [] ? call_timer_fn+0x5/0x340 [ 56.926296] [] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926300] [] run_timer_softirq+0x23a/0x390 [ 56.926306] [] ? clockevents_program_event+0x7f/0x130 [ 56.926316] [] __do_softirq+0xc3/0x4a2 [ 56.926323] [] irq_exit+0x8a/0xb0 [ 56.926327] [] smp_apic_timer_interrupt+0x46/0x60 [ 56.926331] [] apic_timer_interrupt+0x89/0x90 [ 56.926333] [] ? default_idle+0x2a/0x1a0 [ 56.926340] [] ? default_idle+0x28/0x1a0 [ 56.926342] [] arch_cpu_idle+0xf/0x20 [ 56.926345] [] default_idle_call+0x2f/0x50 [ 56.926347] [] cpu_startup_entry+0x215/0x3e0 [ 56.926353] [] start_secondary+0xf9/0x100 The warning appears as rtnl_dereference() is wrongly used in tipc_l2_send_msg() under RCU read lock protection. Instead the proper usage should be that rcu_dereference_rtnl() is called here. Fixes: 5b7066c3dd24 ("tipc: stricter filtering of packets in bearer layer") Acked-by: Jon Maloy Signed-off-by: Ying Xue Signed-off-by: David S. Miller diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c index 6f11c62..bf8f05c 100644 --- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -405,7 +405,7 @@ int tipc_l2_send_msg(struct net *net, struct sk_buff *skb, return 0; /* Send RESET message even if bearer is detached from device */ - tipc_ptr = rtnl_dereference(dev->tipc_ptr); + tipc_ptr = rcu_dereference_rtnl(dev->tipc_ptr); if (unlikely(!tipc_ptr && !msg_is_reset(buf_msg(skb)))) goto drop; -- cgit v0.10.2 From c91522f860bb9dd4178c8280bbebd4f4321b7199 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Wed, 15 Jun 2016 14:11:31 +0800 Subject: tipc: eliminate uninitialized variable warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/tipc/link.c: In function ‘tipc_link_timeout’: net/tipc/link.c:744:28: warning: ‘mtyp’ may be used uninitialized in this function [-Wuninitialized] Fixes: 42b18f605fea ("tipc: refactor function tipc_link_timeout()") Acked-by: Jon Maloy Signed-off-by: Ying Xue Signed-off-by: David S. Miller diff --git a/net/tipc/link.c b/net/tipc/link.c index 7059c94..67b6ab9 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -704,7 +704,8 @@ static void link_profile_stats(struct tipc_link *l) */ int tipc_link_timeout(struct tipc_link *l, struct sk_buff_head *xmitq) { - int mtyp, rc = 0; + int mtyp = 0; + int rc = 0; bool state = false; bool probe = false; bool setup = false; -- cgit v0.10.2 From 4a1836701fd59476ee1331379e00a9ab51ba4f61 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 17:45:51 +0200 Subject: net: skfb: remove obsolete -I cflag The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller diff --git a/drivers/net/fddi/skfp/Makefile b/drivers/net/fddi/skfp/Makefile index b0be023..a957a1c 100644 --- a/drivers/net/fddi/skfp/Makefile +++ b/drivers/net/fddi/skfp/Makefile @@ -17,4 +17,4 @@ skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \ # projects. To keep the source common for all those drivers (and # thus simplify fixes to it), please do not clean it up! -ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes +ccflags-y := -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes -- cgit v0.10.2 From daddef76c3deaaa7922f9d7b18edbf0a061215c3 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 15 Jun 2016 11:14:53 +0200 Subject: net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG The implementation of net_dbg_ratelimited in the CONFIG_DYNAMIC_DEBUG case was added with 2c94b5373 ("net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case"). The implementation strategy was to take the usual definition of the dynamic_pr_debug macro, but alter it by adding a call to "net_ratelimit()" in the if statement. This is, in fact, the correct approach. However, while doing this, the author of the commit forgot to surround fmt by pr_fmt, resulting in unprefixed log messages appearing in the console. So, this commit adds back the pr_fmt(fmt) invocation, making net_dbg_ratelimited properly consistent across DEBUG, no DEBUG, and DYNAMIC_DEBUG cases, and bringing parity with the behavior of dynamic_pr_debug as well. Fixes: 2c94b5373 ("net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case") Signed-off-by: Jason A. Donenfeld Cc: Tim Bingham Signed-off-by: David S. Miller diff --git a/include/linux/net.h b/include/linux/net.h index 9aa49a0..25aa03b 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -251,7 +251,8 @@ do { \ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \ net_ratelimit()) \ - __dynamic_pr_debug(&descriptor, fmt, ##__VA_ARGS__); \ + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ + ##__VA_ARGS__); \ } while (0) #elif defined(DEBUG) #define net_dbg_ratelimited(fmt, ...) \ -- cgit v0.10.2 From e582615ad33dbd39623084a02e95567b116e1eea Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Jun 2016 06:24:00 -0700 Subject: gre: fix error handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1) gre_parse_header() can be called from gre_err() At this point transport header points to ICMP header, not the inner header. 2) We can not really change transport header as ipgre_err() will later assume transport header still points to ICMP header (using icmp_hdr()) 3) pskb_may_pull() logic in gre_parse_header() really works if we are interested at zone pointed by skb->data 4) As Jiri explained in commit b7f8fe251e46 ("gre: do not pull header in ICMP error processing") we should not pull headers in error handler. So this fix : A) changes gre_parse_header() to use skb->data instead of skb_transport_header() B) Adds a nhs parameter to gre_parse_header() so that we can skip the not pulled IP header from error path. This offset is 0 for normal receive path. C) remove obsolete IPV6 includes Signed-off-by: Eric Dumazet Cc: Tom Herbert Cc: Maciej Żenczykowski Cc: Jiri Benc Signed-off-by: David S. Miller diff --git a/include/net/gre.h b/include/net/gre.h index 5dce30a..7a54a31 100644 --- a/include/net/gre.h +++ b/include/net/gre.h @@ -26,7 +26,7 @@ int gre_del_protocol(const struct gre_protocol *proto, u8 version); struct net_device *gretap_fb_dev_create(struct net *net, const char *name, u8 name_assign_type); int gre_parse_header(struct sk_buff *skb, struct tnl_ptk_info *tpi, - bool *csum_err, __be16 proto); + bool *csum_err, __be16 proto, int nhs); static inline int gre_calc_hlen(__be16 o_flags) { diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c index 4c39f4f..de1d119 100644 --- a/net/ipv4/gre_demux.c +++ b/net/ipv4/gre_demux.c @@ -62,26 +62,26 @@ EXPORT_SYMBOL_GPL(gre_del_protocol); /* Fills in tpi and returns header length to be pulled. */ int gre_parse_header(struct sk_buff *skb, struct tnl_ptk_info *tpi, - bool *csum_err, __be16 proto) + bool *csum_err, __be16 proto, int nhs) { const struct gre_base_hdr *greh; __be32 *options; int hdr_len; - if (unlikely(!pskb_may_pull(skb, sizeof(struct gre_base_hdr)))) + if (unlikely(!pskb_may_pull(skb, nhs + sizeof(struct gre_base_hdr)))) return -EINVAL; - greh = (struct gre_base_hdr *)skb_transport_header(skb); + greh = (struct gre_base_hdr *)(skb->data + nhs); if (unlikely(greh->flags & (GRE_VERSION | GRE_ROUTING))) return -EINVAL; tpi->flags = gre_flags_to_tnl_flags(greh->flags); hdr_len = gre_calc_hlen(tpi->flags); - if (!pskb_may_pull(skb, hdr_len)) + if (!pskb_may_pull(skb, nhs + hdr_len)) return -EINVAL; - greh = (struct gre_base_hdr *)skb_transport_header(skb); + greh = (struct gre_base_hdr *)(skb->data + nhs); tpi->proto = greh->protocol; options = (__be32 *)(greh + 1); diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 07c5cf1..1d000af 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -49,12 +49,6 @@ #include #include -#if IS_ENABLED(CONFIG_IPV6) -#include -#include -#include -#endif - /* Problems & solutions -------------------- @@ -217,12 +211,14 @@ static void gre_err(struct sk_buff *skb, u32 info) * by themselves??? */ + const struct iphdr *iph = (struct iphdr *)skb->data; const int type = icmp_hdr(skb)->type; const int code = icmp_hdr(skb)->code; struct tnl_ptk_info tpi; bool csum_err = false; - if (gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP)) < 0) { + if (gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP), + iph->ihl * 4) < 0) { if (!csum_err) /* ignore csum errors. */ return; } @@ -338,7 +334,7 @@ static int gre_rcv(struct sk_buff *skb) } #endif - hdr_len = gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP)); + hdr_len = gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP), 0); if (hdr_len < 0) goto drop; diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index fdc9de2..776d145 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -468,7 +468,7 @@ static int gre_rcv(struct sk_buff *skb) bool csum_err = false; int hdr_len; - hdr_len = gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IPV6)); + hdr_len = gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IPV6), 0); if (hdr_len < 0) goto drop; -- cgit v0.10.2 From 19de99f70b87fcc3338da52a89c439b088cbff71 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 15 Jun 2016 18:25:38 -0700 Subject: bpf: fix matching of data/data_end in verifier The ctx structure passed into bpf programs is different depending on bpf program type. The verifier incorrectly marked ctx->data and ctx->data_end access based on ctx offset only. That caused loads in tracing programs int bpf_prog(struct pt_regs *ctx) { .. ctx->ax .. } to be incorrectly marked as PTR_TO_PACKET which later caused verifier to reject the program that was actually valid in tracing context. Fix this by doing program type specific matching of ctx offsets. Fixes: 969bf05eb3ce ("bpf: direct packet access") Reported-by: Sasha Goldshtein Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 8ee27b8..8269caf 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -111,6 +111,31 @@ enum bpf_access_type { BPF_WRITE = 2 }; +/* types of values stored in eBPF registers */ +enum bpf_reg_type { + NOT_INIT = 0, /* nothing was written into register */ + UNKNOWN_VALUE, /* reg doesn't contain a valid pointer */ + PTR_TO_CTX, /* reg points to bpf_context */ + CONST_PTR_TO_MAP, /* reg points to struct bpf_map */ + PTR_TO_MAP_VALUE, /* reg points to map element value */ + PTR_TO_MAP_VALUE_OR_NULL,/* points to map elem value or NULL */ + FRAME_PTR, /* reg == frame_pointer */ + PTR_TO_STACK, /* reg == frame_pointer + imm */ + CONST_IMM, /* constant integer value */ + + /* PTR_TO_PACKET represents: + * skb->data + * skb->data + imm + * skb->data + (u16) var + * skb->data + (u16) var + imm + * if (range > 0) then [ptr, ptr + range - off) is safe to access + * if (id > 0) means that some 'var' was added + * if (off > 0) menas that 'imm' was added + */ + PTR_TO_PACKET, + PTR_TO_PACKET_END, /* skb->data + headlen */ +}; + struct bpf_prog; struct bpf_verifier_ops { @@ -120,7 +145,8 @@ struct bpf_verifier_ops { /* return true if 'size' wide access at offset 'off' within bpf_context * with 'type' (read or write) is allowed */ - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); + bool (*is_valid_access)(int off, int size, enum bpf_access_type type, + enum bpf_reg_type *reg_type); u32 (*convert_ctx_access)(enum bpf_access_type type, int dst_reg, int src_reg, int ctx_off, diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 668e079..eec9f90 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -126,31 +126,6 @@ * are set to NOT_INIT to indicate that they are no longer readable. */ -/* types of values stored in eBPF registers */ -enum bpf_reg_type { - NOT_INIT = 0, /* nothing was written into register */ - UNKNOWN_VALUE, /* reg doesn't contain a valid pointer */ - PTR_TO_CTX, /* reg points to bpf_context */ - CONST_PTR_TO_MAP, /* reg points to struct bpf_map */ - PTR_TO_MAP_VALUE, /* reg points to map element value */ - PTR_TO_MAP_VALUE_OR_NULL,/* points to map elem value or NULL */ - FRAME_PTR, /* reg == frame_pointer */ - PTR_TO_STACK, /* reg == frame_pointer + imm */ - CONST_IMM, /* constant integer value */ - - /* PTR_TO_PACKET represents: - * skb->data - * skb->data + imm - * skb->data + (u16) var - * skb->data + (u16) var + imm - * if (range > 0) then [ptr, ptr + range - off) is safe to access - * if (id > 0) means that some 'var' was added - * if (off > 0) menas that 'imm' was added - */ - PTR_TO_PACKET, - PTR_TO_PACKET_END, /* skb->data + headlen */ -}; - struct reg_state { enum bpf_reg_type type; union { @@ -695,10 +670,10 @@ static int check_packet_access(struct verifier_env *env, u32 regno, int off, /* check access to 'struct bpf_context' fields */ static int check_ctx_access(struct verifier_env *env, int off, int size, - enum bpf_access_type t) + enum bpf_access_type t, enum bpf_reg_type *reg_type) { if (env->prog->aux->ops->is_valid_access && - env->prog->aux->ops->is_valid_access(off, size, t)) { + env->prog->aux->ops->is_valid_access(off, size, t, reg_type)) { /* remember the offset of last byte accessed in ctx */ if (env->prog->aux->max_ctx_offset < off + size) env->prog->aux->max_ctx_offset = off + size; @@ -798,21 +773,19 @@ static int check_mem_access(struct verifier_env *env, u32 regno, int off, mark_reg_unknown_value(state->regs, value_regno); } else if (reg->type == PTR_TO_CTX) { + enum bpf_reg_type reg_type = UNKNOWN_VALUE; + if (t == BPF_WRITE && value_regno >= 0 && is_pointer_value(env, value_regno)) { verbose("R%d leaks addr into ctx\n", value_regno); return -EACCES; } - err = check_ctx_access(env, off, size, t); + err = check_ctx_access(env, off, size, t, ®_type); if (!err && t == BPF_READ && value_regno >= 0) { mark_reg_unknown_value(state->regs, value_regno); - if (off == offsetof(struct __sk_buff, data) && - env->allow_ptr_leaks) + if (env->allow_ptr_leaks) /* note that reg.[id|off|range] == 0 */ - state->regs[value_regno].type = PTR_TO_PACKET; - else if (off == offsetof(struct __sk_buff, data_end) && - env->allow_ptr_leaks) - state->regs[value_regno].type = PTR_TO_PACKET_END; + state->regs[value_regno].type = reg_type; } } else if (reg->type == FRAME_PTR || reg->type == PTR_TO_STACK) { diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 720b7bb..e7af6cb 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -349,7 +349,8 @@ static const struct bpf_func_proto *kprobe_prog_func_proto(enum bpf_func_id func } /* bpf+kprobe programs can access fields of 'struct pt_regs' */ -static bool kprobe_prog_is_valid_access(int off, int size, enum bpf_access_type type) +static bool kprobe_prog_is_valid_access(int off, int size, enum bpf_access_type type, + enum bpf_reg_type *reg_type) { /* check bounds */ if (off < 0 || off >= sizeof(struct pt_regs)) @@ -427,7 +428,8 @@ static const struct bpf_func_proto *tp_prog_func_proto(enum bpf_func_id func_id) } } -static bool tp_prog_is_valid_access(int off, int size, enum bpf_access_type type) +static bool tp_prog_is_valid_access(int off, int size, enum bpf_access_type type, + enum bpf_reg_type *reg_type) { if (off < sizeof(void *) || off >= PERF_MAX_TRACE_SIZE) return false; diff --git a/net/core/filter.c b/net/core/filter.c index 68adb5f..c4b330c 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2085,7 +2085,8 @@ static bool __is_valid_access(int off, int size, enum bpf_access_type type) } static bool sk_filter_is_valid_access(int off, int size, - enum bpf_access_type type) + enum bpf_access_type type, + enum bpf_reg_type *reg_type) { switch (off) { case offsetof(struct __sk_buff, tc_classid): @@ -2108,7 +2109,8 @@ static bool sk_filter_is_valid_access(int off, int size, } static bool tc_cls_act_is_valid_access(int off, int size, - enum bpf_access_type type) + enum bpf_access_type type, + enum bpf_reg_type *reg_type) { if (type == BPF_WRITE) { switch (off) { @@ -2123,6 +2125,16 @@ static bool tc_cls_act_is_valid_access(int off, int size, return false; } } + + switch (off) { + case offsetof(struct __sk_buff, data): + *reg_type = PTR_TO_PACKET; + break; + case offsetof(struct __sk_buff, data_end): + *reg_type = PTR_TO_PACKET_END; + break; + } + return __is_valid_access(off, size, type); } -- cgit v0.10.2 From ad572d174787daa59e24b8b5c83028c09cdb5ddb Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 15 Jun 2016 18:25:39 -0700 Subject: bpf, trace: check event type in bpf_perf_event_read similar to bpf_perf_event_output() the bpf_perf_event_read() helper needs to check the type of the perf_event before reading the counter. Fixes: a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") Reported-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index e7af6cb..26f603d 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -209,6 +209,10 @@ static u64 bpf_perf_event_read(u64 r1, u64 index, u64 r3, u64 r4, u64 r5) event->pmu->count) return -EINVAL; + if (unlikely(event->attr.type != PERF_TYPE_HARDWARE && + event->attr.type != PERF_TYPE_RAW)) + return -EINVAL; + /* * we don't know if the function is run successfully by the * return value. It can be judged in other places, such as -- cgit v0.10.2 From 4e384ac19b5be6ad084b215d298b82b3a91ad24b Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:17 +0800 Subject: r8152: disable MAC clock speed down Disable MAC clock speed down. It may casue the first control transfer to contain the wrong data, when the power state change from U1 to U0. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 3f9f6ed..89dc752 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3382,15 +3382,11 @@ static void r8153_init(struct r8152 *tp) r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | - EEE_SPDWN_EN); + /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); r8153_enable_eee(tp); r8153_aldps_en(tp, true); -- cgit v0.10.2 From 93fe9b1838404fcc3bea320b704bfa461d8e57a6 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:18 +0800 Subject: r8152: reset the bmu Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected data remains in the hw. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 89dc752..f5bc351 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -116,6 +116,7 @@ #define USB_TX_DMA 0xd434 #define USB_TOLERANCE 0xd490 #define USB_LPM_CTRL 0xd41a +#define USB_BMU_RESET 0xd4b0 #define USB_UPS_CTRL 0xd800 #define USB_MISC_0 0xd81a #define USB_POWER_CUT 0xd80a @@ -338,6 +339,10 @@ #define TEST_MODE_DISABLE 0x00000001 #define TX_SIZE_ADJUST1 0x00000100 +/* USB_BMU_RESET */ +#define BMU_RESET_EP_IN 0x01 +#define BMU_RESET_EP_OUT 0x02 + /* USB_UPS_CTRL */ #define POWER_CUT 0x0100 @@ -2456,6 +2461,17 @@ static void r8153_teredo_off(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); } +static void rtl_reset_bmu(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET); + ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); + ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT; + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); +} + static void r8152_aldps_en(struct r8152 *tp, bool enable) { if (enable) { @@ -2681,6 +2697,7 @@ static void r8153_first_init(struct r8152 *tp) r8153_hw_phy_cfg(tp); rtl8152_nic_reset(tp); + rtl_reset_bmu(tp); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; @@ -2742,6 +2759,7 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); rtl_disable(tp); + rtl_reset_bmu(tp); for (i = 0; i < 1000; i++) { ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); @@ -2803,6 +2821,7 @@ static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); rtl_disable(tp); + rtl_reset_bmu(tp); r8153_aldps_en(tp, true); usb_enable_lpm(tp->udev); } -- cgit v0.10.2 From a59e6d815226b70780427648e359da9bbee07171 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 16 Jun 2016 10:55:19 +0800 Subject: r8152: correct the rx early size The rx early size should be (agg_buf_sz - packet size) / 8 Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index f5bc351..4e257b8 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "3" +#define NET_VERSION "4" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -2174,7 +2174,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) static void r8153_set_rx_early_size(struct r8152 *tp) { u32 mtu = tp->netdev->mtu; - u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4; + u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8; ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } -- cgit v0.10.2 From 9ca91a65583c73e4be6e9f53323a7ae04e6803ef Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 17:55:23 +0200 Subject: clk: sunxi: remove unused variable The only use of the local num_parents variable was remove, so we now get a warning: drivers/clk/sunxi/clk-sun4i-tcon-ch1.c: In function 'tcon_ch1_get_parent': drivers/clk/sunxi/clk-sun4i-tcon-ch1.c:82:6: error: unused variable 'num_parents' [-Werror=unused-variable] This removes the variable. Signed-off-by: Arnd Bergmann Fixes: 4de2d58bc973 ("clk: sunxi: tcon-ch1: Do not return a negative error in get_parent") Signed-off-by: Maxime Ripard diff --git a/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c index 2485852..b6d29d1 100644 --- a/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c +++ b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c @@ -79,7 +79,6 @@ static int tcon_ch1_is_enabled(struct clk_hw *hw) static u8 tcon_ch1_get_parent(struct clk_hw *hw) { struct tcon_ch1_clk *tclk = hw_to_tclk(hw); - int num_parents = clk_hw_get_num_parents(hw); u32 reg; reg = readl(tclk->reg) >> TCON_CH1_SCLK2_MUX_SHIFT; -- cgit v0.10.2 From 5fc39d347267bd029fcc9099c70e2fe2d53130e9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 15 Jun 2016 13:20:19 +0200 Subject: ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13 The sun4i-timer driver registers its sched_clock only if the machine is compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or "allwinner,sun4i-a10". Add the missing "allwinner,sun5i-a13" string to the machine compatible. Signed-off-by: Boris Brezillon Fixes: 465a225fb2af ("ARM: sun5i: Add C.H.I.P DTS") Cc: Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index a8d8b45..f694482 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -52,7 +52,7 @@ / { model = "NextThing C.H.I.P."; - compatible = "nextthing,chip", "allwinner,sun5i-r8"; + compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13"; aliases { i2c0 = &i2c0; -- cgit v0.10.2 From 362761299eea7dfc3a4870551de36e08758b9254 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Tue, 14 Jun 2016 15:29:24 +0200 Subject: power_supply: tps65217-charger: Fix NULL deref during property export This bug leads to: [ 1.906411] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 1.914878] pgd = c0004000 [ 1.917786] [0000000c] *pgd=00000000 [ 1.921536] Internal error: Oops: 5 [#1] SMP ARM [ 1.926357] Modules linked in: [ 1.929556] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.4.5 #18 [ 1.936006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 1.942383] Workqueue: events power_supply_changed_work [ 1.947842] task: de2c41c0 ti: de2c8000 task.ti: de2c8000 [ 1.953483] PC is at tps65217_ac_get_property+0x14/0x28 [ 1.958937] LR is at tps65217_ac_get_property+0x10/0x28 Driver was trying to use drv_data in property get handler. However drv_data was not set, so it caused NULL pointer dereference. This patch properly sets drv_data during probe by power_supply_config parameter, so the property get handler works as desired. Signed-off-by: Marcin Niestroj Fixes: 3636859b280c ("power_supply: Add support for tps65217-charger") Signed-off-by: Sebastian Reichel diff --git a/drivers/power/tps65217_charger.c b/drivers/power/tps65217_charger.c index d9f5673..73dfae4 100644 --- a/drivers/power/tps65217_charger.c +++ b/drivers/power/tps65217_charger.c @@ -197,6 +197,7 @@ static int tps65217_charger_probe(struct platform_device *pdev) { struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); struct tps65217_charger *charger; + struct power_supply_config cfg = {}; int ret; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -208,9 +209,12 @@ static int tps65217_charger_probe(struct platform_device *pdev) charger->tps = tps; charger->dev = &pdev->dev; + cfg.of_node = pdev->dev.of_node; + cfg.drv_data = charger; + charger->ac = devm_power_supply_register(&pdev->dev, &tps65217_charger_desc, - NULL); + &cfg); if (IS_ERR(charger->ac)) { dev_err(&pdev->dev, "failed: power supply register\n"); return PTR_ERR(charger->ac); -- cgit v0.10.2 From c5379ba8fccd99d5f99632c789f0393d84a57805 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 Jun 2016 15:42:25 +0200 Subject: ARM: mvebu: fix HW I/O coherency related deadlocks Until now, our understanding for HW I/O coherency to work on the Cortex-A9 based Marvell SoC was that only the PCIe regions should be mapped strongly-ordered. However, we were still encountering some deadlocks, especially when testing the CESA crypto engine. After checking with the HW designers, it was concluded that all the MMIO registers should be mapped as strongly ordered for the HW I/O coherency mechanism to work properly. This fixes some easy to reproduce deadlocks with the CESA crypto engine driver (dmcrypt on a sufficiently large disk partition). Tested-by: Terry Stockert Tested-by: Romain Perier Cc: Terry Stockert Cc: Romain Perier Cc: Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 7e989d6..474abff 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -162,22 +162,16 @@ exit: } /* - * This ioremap hook is used on Armada 375/38x to ensure that PCIe - * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This - * is needed as a workaround for a deadlock issue between the PCIe - * interface and the cache controller. + * This ioremap hook is used on Armada 375/38x to ensure that all MMIO + * areas are mapped as MT_UNCACHED instead of MT_DEVICE. This is + * needed for the HW I/O coherency mechanism to work properly without + * deadlock. */ static void __iomem * -armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller) +armada_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) { - struct resource pcie_mem; - - mvebu_mbus_get_pcie_mem_aperture(&pcie_mem); - - if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end) - mtype = MT_UNCACHED; - + mtype = MT_UNCACHED; return __arm_ioremap_caller(phys_addr, size, mtype, caller); } @@ -186,7 +180,7 @@ static void __init armada_375_380_coherency_init(struct device_node *np) struct device_node *cache_dn; coherency_cpu_base = of_iomap(np, 0); - arch_ioremap_caller = armada_pcie_wa_ioremap_caller; + arch_ioremap_caller = armada_wa_ioremap_caller; /* * We should switch the PL310 to I/O coherency mode only if -- cgit v0.10.2 From c70410cb91de70707a507ee7beef7021a5a89f0d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 9 Jun 2016 14:38:50 -0400 Subject: rtl8xxxu: fix typo on variable name, compare against correct variable path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index fe19ace..b04cf30 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1149,7 +1149,7 @@ static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, for (i = 0; i < retry; i++) { path_b_ok = rtl8192eu_rx_iqk_path_b(priv); - if (path_a_ok == 0x03) { + if (path_b_ok == 0x03) { val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); result[t][6] = (val32 >> 16) & 0x3ff; -- cgit v0.10.2 From 6a02734d420fca778554878d03017017537d92e1 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 Jun 2016 15:42:26 +0200 Subject: ARM: mvebu: map PCI I/O regions strongly ordered In order for HW I/O coherency to work on Cortex-A9 based Marvell SoCs, all MMIO registers must be mapped strongly ordered. In commit 1c8c3cf0b5239 ("ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type") we implemented a new function, pci_ioremap_set_mem_type(), that allow sub-architecture code to override the memory type used to map PCI I/O regions. In the discussion around this patch series [1], Arnd Bergmann made the comment that maybe all PCI I/O regions should be mapped strongly-ordered, which would have made our proposal to add pci_ioremap_set_mem_type() irrelevant. So, we submitted a patch [2] that did what Arnd suggested. However, Russell in the end merged our initial proposal to add pci_ioremap_set_mem_type(), but it was never used anywhere. Further discussion with Arnd and other folks on IRC lead to the conclusion that in fact using strongly-ordered for all platforms was maybe not desirable, and therefore, using pci_ioremap_set_mem_type() was the most appropriate solution. As a consequence, this commit finally adds the pci_ioremap_set_mem_type() call in the mach-mvebu platform code, which was originally part of our initial patch series [3] and is necessary for the whole mechanism to work. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/256565.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/256755.html [3] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/256563.html Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 474abff..e80f0dd 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -181,6 +181,7 @@ static void __init armada_375_380_coherency_init(struct device_node *np) coherency_cpu_base = of_iomap(np, 0); arch_ioremap_caller = armada_wa_ioremap_caller; + pci_ioremap_set_mem_type(MT_UNCACHED); /* * We should switch the PL310 to I/O coherency mode only if -- cgit v0.10.2 From 929e604efa3dc0522214e0dc18984be23993e9f0 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 Jun 2016 15:42:27 +0200 Subject: ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys When the support for the Marvell crypto engine was added in the Device Tree of the various Armada 385 Device Tree files in commit d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards"), a typo was made in the MBus window attributes for the Armada 385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit fixes this typo, which makes the CESA engines operational on Armada 385 Linksys boards. Reported-by: Terry Stockert Cc: Terry Stockert Cc: Imre Kaloz Cc: Boris Brezillon Cc: Fixes: d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards") Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 8450944..22f7a13 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -58,8 +58,8 @@ soc { ranges = ; + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { -- cgit v0.10.2 From d945b5e9f0e35cb56a3783d849b5f0f37da0a7f1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 16 Jun 2016 14:38:42 +0200 Subject: workqueue: Fix setting affinity of unbound worker threads With commit e9d867a67fd03ccc ("sched: Allow per-cpu kernel threads to run on online && !active"), __set_cpus_allowed_ptr() expects that only strict per-cpu kernel threads can have affinity to an online CPU which is not yet active. This assumption is currently broken in the CPU_ONLINE notification handler for the workqueues where restore_unbound_workers_cpumask() calls set_cpus_allowed_ptr() when the first cpu in the unbound worker's pool->attr->cpumask comes online. Since set_cpus_allowed_ptr() is called with pool->attr->cpumask in which only one CPU is online which is not yet active, we get the following WARN_ON during an CPU online operation. ------------[ cut here ]------------ WARNING: CPU: 40 PID: 248 at kernel/sched/core.c:1166 __set_cpus_allowed_ptr+0x228/0x2e0 Modules linked in: CPU: 40 PID: 248 Comm: cpuhp/40 Not tainted 4.6.0-autotest+ #4 <..snip..> Call Trace: [c000000f273ff920] [c00000000010493c] __set_cpus_allowed_ptr+0x2cc/0x2e0 (unreliable) [c000000f273ffac0] [c0000000000ed4b0] workqueue_cpu_up_callback+0x2c0/0x470 [c000000f273ffb70] [c0000000000f5c58] notifier_call_chain+0x98/0x100 [c000000f273ffbc0] [c0000000000c5ed0] __cpu_notify+0x70/0xe0 [c000000f273ffc00] [c0000000000c6028] notify_online+0x38/0x50 [c000000f273ffc30] [c0000000000c5214] cpuhp_invoke_callback+0x84/0x250 [c000000f273ffc90] [c0000000000c562c] cpuhp_up_callbacks+0x5c/0x120 [c000000f273ffce0] [c0000000000c64d4] cpuhp_thread_fun+0x184/0x1c0 [c000000f273ffd20] [c0000000000fa050] smpboot_thread_fn+0x290/0x2a0 [c000000f273ffd80] [c0000000000f45b0] kthread+0x110/0x130 [c000000f273ffe30] [c000000000009570] ret_from_kernel_thread+0x5c/0x6c ---[ end trace 00f1456578b2a3b2 ]--- This patch fixes this by limiting the mask to the intersection of the pool affinity and online CPUs. Changelog-cribbed-from: Gautham R. Shenoy Reported-by: Abdul Haleem Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index e1c0e99..97e7b79 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4600,15 +4600,11 @@ static void restore_unbound_workers_cpumask(struct worker_pool *pool, int cpu) if (!cpumask_test_cpu(cpu, pool->attrs->cpumask)) return; - /* is @cpu the only online CPU? */ cpumask_and(&cpumask, pool->attrs->cpumask, cpu_online_mask); - if (cpumask_weight(&cpumask) != 1) - return; /* as we're called from CPU_ONLINE, the following shouldn't fail */ for_each_pool_worker(worker, pool) - WARN_ON_ONCE(set_cpus_allowed_ptr(worker->task, - pool->attrs->cpumask) < 0); + WARN_ON_ONCE(set_cpus_allowed_ptr(worker->task, &cpumask) < 0); } /* -- cgit v0.10.2 From 17471c7ba5115ed724d624577b21c166d2194272 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Jun 2016 22:31:10 +0200 Subject: net: sfc: avoid -Wtype-limits warning When building with -Wextra, we get a harmless warning from the EFX_EXTRACT_OWORD32 macro: ethernet/sfc/farch.c: In function 'efx_farch_test_registers': ethernet/sfc/farch.c:119:30: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:144: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:392: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] ethernet/sfc/farch.c:124:731: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] The macro and the caller are both correct, but we can avoid the warning by changing the index variable to a signed type. Signed-off-by: Arnd Bergmann Acked-by: Bert Kenward Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 133e9e3..4c83739 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -104,7 +104,8 @@ int efx_farch_test_registers(struct efx_nic *efx, const struct efx_farch_register_test *regs, size_t n_regs) { - unsigned address = 0, i, j; + unsigned address = 0; + int i, j; efx_oword_t mask, imask, original, reg, buf; for (i = 0; i < n_regs; ++i) { -- cgit v0.10.2 From a547224dceed4645139f7eff72ff51adb9938bcb Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 15 Jun 2016 14:42:11 -0700 Subject: mlx4e: Do not attempt to offload VXLAN ports that are unrecognized The mlx4e driver does not support more than one port for VXLAN offload. As such expecting the hardware to offload other ports is invalid since it appears the parsing logic is used to perform Tx checksum and segmentation offloads. Use the vxlan_port number to determine in which cases we can apply the offload and in which cases we can not. Signed-off-by: Alexander Duyck Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 19ceced..a2c2536 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2447,9 +2447,14 @@ static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, * strip that feature if this is an IPv6 encapsulated frame. */ if (skb->encapsulation && - (skb->ip_summed == CHECKSUM_PARTIAL) && - (ip_hdr(skb)->version != 4)) - features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + (skb->ip_summed == CHECKSUM_PARTIAL)) { + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (!priv->vxlan_port || + (ip_hdr(skb)->version != 4) || + (udp_hdr(skb)->dest != priv->vxlan_port)) + features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); + } return features; } -- cgit v0.10.2 From 8fa3b8d689a54d6d04ff7803c724fb7aca6ce98e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 26 May 2016 15:42:13 -0400 Subject: cgroup: set css->id to -1 during init If percpu_ref initialization fails during css_create(), the free path can end up trying to free css->id of zero. As ID 0 is unused, it doesn't cause a critical breakage but it does trigger a warning message. Fix it by setting css->id to -1 from init_and_link_css(). Signed-off-by: Tejun Heo Cc: Wenwei Tao Fixes: 01e586598b22 ("cgroup: release css->id after css_free") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Tejun Heo diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 789b84f..688eb0c 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -5063,6 +5063,7 @@ static void init_and_link_css(struct cgroup_subsys_state *css, memset(css, 0, sizeof(*css)); css->cgroup = cgrp; css->ss = ss; + css->id = -1; INIT_LIST_HEAD(&css->sibling); INIT_LIST_HEAD(&css->children); css->serial_nr = css_serial_nr_next++; -- cgit v0.10.2 From d5d8760b78d0cfafe292f965f599988138b06a70 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 16 Jun 2016 17:06:19 +0900 Subject: sit: correct IP protocol used in ipip6_err Since 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") ipip6_err() may be called for packets whose IP protocol is IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6. In the case of IPPROTO_IPIP packets the correct protocol value is not passed to ipv4_update_pmtu() or ipv4_redirect(). This patch resolves this problem by using the IP protocol of the packet rather than a hard-coded value. This appears to be consistent with the usage of the protocol of a packet by icmp_socket_deliver() the caller of ipip6_err(). I was able to exercise the redirect case by using a setup where an ICMP redirect was received for the destination of the encapsulated packet. However, it appears that although incorrect the protocol field is not used in this case and thus no problem manifests. On inspection it does not appear that a problem will manifest in the fragmentation needed/update pmtu case either. In short I believe this is a cosmetic fix. None the less, the use of IPPROTO_IPV6 seems wrong and confusing. Reviewed-by: Dinan Gunawardena Signed-off-by: Simon Horman Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 0a5a255..0619ac7 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -560,13 +560,13 @@ static int ipip6_err(struct sk_buff *skb, u32 info) if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) { ipv4_update_pmtu(skb, dev_net(skb->dev), info, - t->parms.link, 0, IPPROTO_IPV6, 0); + t->parms.link, 0, iph->protocol, 0); err = 0; goto out; } if (type == ICMP_REDIRECT) { ipv4_redirect(skb, dev_net(skb->dev), t->parms.link, 0, - IPPROTO_IPV6, 0); + iph->protocol, 0); err = 0; goto out; } -- cgit v0.10.2 From ce449ba77a2271dce9771fb1f3eb37e4be6a8b81 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 16 Jun 2016 14:42:50 +0100 Subject: nfp: use correct index to mask link state irq We were using an incorrect define to get the irq vector number. NFP_NET_CFG_LSC is a control BAR offset, LSC interrupt vector index is called NFP_NET_IRQ_LSC_IDX. For machines with less than 30 CPUs this meant that we were disabling/enabling IRQ 0. For bigger hosts we were just playing with the 31st RX/TX interrupt. Fixes: 0ba40af963f0 ("nfp: move link state interrupt request/free calls") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index fa47c14..ba26bb3 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2015,7 +2015,7 @@ static void nfp_net_open_stack(struct nfp_net *nn) netif_tx_wake_all_queues(nn->netdev); - enable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + enable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nfp_net_read_link_status(nn); } @@ -2044,7 +2044,7 @@ static int nfp_net_netdev_open(struct net_device *netdev) NFP_NET_IRQ_LSC_IDX, nn->lsc_handler); if (err) goto err_free_exn; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); @@ -2133,7 +2133,7 @@ static void nfp_net_close_stack(struct nfp_net *nn) { unsigned int r; - disable_irq(nn->irq_entries[NFP_NET_CFG_LSC].vector); + disable_irq(nn->irq_entries[NFP_NET_IRQ_LSC_IDX].vector); netif_carrier_off(nn->netdev); nn->link_up = false; -- cgit v0.10.2 From 8a092e682f20f193f2070dba2ea1904e95814126 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mika=20B=C3=A5tsman?= Date: Fri, 17 Jun 2016 13:31:37 +0300 Subject: regulator: anatop: allow regulator to be in bypass mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by: Mika Båtsman Signed-off-by: Mark Brown diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 63cd5e6..3a6d029 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; - if (!sreg->sel) { + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; } -- cgit v0.10.2 From 50c7a0ef2d97e56c7ce2f1ea5fe1d8e25aadc1bb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Jun 2016 14:34:32 +0200 Subject: ASoC: wm8940: Enable cache usage to fix crashes on resume The wm8940 driver is using a regmap cache sync to restore the configuration of the chip when switching from OFF to STANDBY, but does not actually define a register cache which means that the restore is never going to work and we trigger asserts in regmap. Fix this by enabling caching. Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to fix crashes on resume") by Mark Brown . Signed-off-by: Geert Uytterhoeven Acked-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index f6f9395..1c60081 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -743,6 +743,7 @@ static const struct regmap_config wm8940_regmap = { .max_register = WM8940_MONOMIX, .reg_defaults = wm8940_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm8940_reg_defaults), + .cache_type = REGCACHE_RBTREE, .readable_reg = wm8940_readable_register, .volatile_reg = wm8940_volatile_register, -- cgit v0.10.2 From dcd2d1f78664fdc75eadaaf65257834e24383d01 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Jun 2016 14:34:30 +0200 Subject: ASoC: ak4613: Enable cache usage to fix crashes on resume During system resume: kernel BUG at drivers/base/regmap/regcache.c:347! ... PC is at regcache_sync+0x1c/0x128 LR is at ak4613_resume+0x28/0x34 The ak4613 driver is using a regmap cache sync to restore the configuration of the chip on resume but does not actually define a register cache which means that the resume is never going to work and we trigger asserts in regmap. Fix this by enabling caching. Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to fix crashes on resume") by Mark Brown . Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index 33d2f2e1..5013d2b 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -146,6 +146,7 @@ static const struct regmap_config ak4613_regmap_cfg = { .max_register = 0x16, .reg_defaults = ak4613_reg, .num_reg_defaults = ARRAY_SIZE(ak4613_reg), + .cache_type = REGCACHE_RBTREE, }; static const struct of_device_id ak4613_of_match[] = { -- cgit v0.10.2 From 86c0ae7cde7a8699116b365a5e3016753f0cd92a Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 16 Jun 2016 22:04:35 +0200 Subject: ASoC: cx20442: set tty->receiver_room in v253_open Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"), introduced in v3.10, revealed a bug in the cx20442 codec driver which has never been setting tty->receive_room on line discipline open as it should from the beginning. Fix it. Created and tested on Amstrad Delta against Linux-4.7-rc3 Signed-off-by: Janusz Krzysztofik Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index d6f4abb..fb3885f 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -226,6 +226,7 @@ static int v253_open(struct tty_struct *tty) if (!tty->disc_data) return -ENODEV; + tty->receive_room = 16; if (tty->ops->write(tty, v253_init, len) != len) { ret = -EIO; goto err; -- cgit v0.10.2 From 8f45927c3cae4db85887700e5415286f766cbaf9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Jun 2016 12:54:18 +0200 Subject: netfilter: xt_SYNPROXY: add missing header to Kbuild Matt Whitlock says: Without this line, the file xt_SYNPROXY.h does not get installed in /usr/include/linux/netfilter/, and thus user-space programs cannot make use of it. Reported-by: Matt Whitlock Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 1d973d2..cd26d7a 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -33,6 +33,7 @@ header-y += xt_NFLOG.h header-y += xt_NFQUEUE.h header-y += xt_RATEEST.h header-y += xt_SECMARK.h +header-y += xt_SYNPROXY.h header-y += xt_TCPMSS.h header-y += xt_TCPOPTSTRIP.h header-y += xt_TEE.h -- cgit v0.10.2 From 1463847e93fe693e89c52b03ab4ede6800d717c1 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Jun 2016 12:54:18 +0200 Subject: netfilter: xt_SYNPROXY: include missing ./usr/include/linux/netfilter/xt_SYNPROXY.h:11: found __[us]{8,16,32,64} type without #include Reported-by: kbuild test robot Signed-off-by: Pablo Neira Ayuso diff --git a/include/uapi/linux/netfilter/xt_SYNPROXY.h b/include/uapi/linux/netfilter/xt_SYNPROXY.h index 2d59fba..ca67e61 100644 --- a/include/uapi/linux/netfilter/xt_SYNPROXY.h +++ b/include/uapi/linux/netfilter/xt_SYNPROXY.h @@ -1,6 +1,8 @@ #ifndef _XT_SYNPROXY_H #define _XT_SYNPROXY_H +#include + #define XT_SYNPROXY_OPT_MSS 0x01 #define XT_SYNPROXY_OPT_WSCALE 0x02 #define XT_SYNPROXY_OPT_SACK_PERM 0x04 -- cgit v0.10.2 From 6762925df4642aec5629f7971ba477d6930f53f7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 31 May 2016 21:47:17 +0900 Subject: phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS change This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: # v4.5+ Reported-by: Simon Horman Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index 76bb88f..4be3f5d 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -144,12 +144,6 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch) extcon_set_cable_state_(ch->extcon, EXTCON_USB, true); } -static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch) -{ - return !!(readl(ch->base + USB2_ADPCTRL) & - USB2_ADPCTRL_OTGSESSVLD); -} - static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) { return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG); @@ -157,13 +151,7 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch) static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch) { - bool is_host = true; - - /* B-device? */ - if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch)) - is_host = false; - - if (is_host) + if (!rcar_gen3_check_id(ch)) rcar_gen3_init_for_host(ch); else rcar_gen3_init_for_peri(ch); -- cgit v0.10.2 From 075adb8046532d9642f411a92b4f385d04ced24d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:31:47 +0000 Subject: phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe() In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c index 793ecb6..8b267a7 100644 --- a/drivers/phy/phy-rockchip-dp.c +++ b/drivers/phy/phy-rockchip-dp.c @@ -90,7 +90,7 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev) return -ENODEV; dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); - if (IS_ERR(dp)) + if (!dp) return -ENOMEM; dp->dev = dev; -- cgit v0.10.2 From 5cf700ac9d50353dc5b8194a57c6f40bf1fc4424 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Mon, 13 Jun 2016 13:45:48 +0200 Subject: phy: phy-sun4i-usb: Fix optional gpios failing probe The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index bae54f7..45f01d6 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -645,11 +645,11 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) data->id_det_irq = gpiod_to_irq(data->id_det_gpio); data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio); - if ((data->id_det_gpio && data->id_det_irq < 0) || - (data->vbus_det_gpio && data->vbus_det_irq < 0)) + if ((data->id_det_gpio && data->id_det_irq <= 0) || + (data->vbus_det_gpio && data->vbus_det_irq <= 0)) data->phy0_poll = true; - if (data->id_det_irq >= 0) { + if (data->id_det_irq > 0) { ret = devm_request_irq(dev, data->id_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, @@ -660,7 +660,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } } - if (data->vbus_det_irq >= 0) { + if (data->vbus_det_irq > 0) { ret = devm_request_irq(dev, data->vbus_det_irq, sun4i_usb_phy0_id_vbus_det_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -- cgit v0.10.2 From d99cb37828a2fe344ecc95d1fad570bbe447cc06 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 18:14:56 +0100 Subject: phy-sun4i-usb: fix missing __iomem * Fix the missing __iomem attribute in sun4i_usb_phy_write() function. This fixes the following sparse warnings: drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces) drivers/phy/phy-sun4i-usb.c:178:39: expected void *phyctl drivers/phy/phy-sun4i-usb.c:178:39: got void [noderef] * drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:185:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:185:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:189:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:189:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:196:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:196:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:199:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:199:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:205:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:205:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:208:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:208:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:210:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:210:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:212:24: expected void const volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:212:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:214:17: expected void volatile [noderef] *addr drivers/phy/phy-sun4i-usb.c:214:17: got void *phyctl Signed-off-by: Ben Dooks Acked-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 45f01d6..7390294 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -175,7 +175,7 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, { struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); u32 temp, usbc_bit = BIT(phy->index * 2); - void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; + void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; int i; mutex_lock(&phy_data->mutex); -- cgit v0.10.2 From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 May 2016 11:01:33 +0300 Subject: phy: bcm-ns-usb2: checking the wrong variable We intended to test "usb2->phy" here instead of "dev". Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') Signed-off-by: Dan Carpenter Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c index 95ab6b2..58dff80 100644 --- a/drivers/phy/phy-bcm-ns-usb2.c +++ b/drivers/phy/phy-bcm-ns-usb2.c @@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev) } usb2->phy = devm_phy_create(dev, NULL, &ops); - if (IS_ERR(dev)) - return PTR_ERR(dev); + if (IS_ERR(usb2->phy)) + return PTR_ERR(usb2->phy); phy_set_drvdata(usb2->phy, usb2); platform_set_drvdata(pdev, usb2); -- cgit v0.10.2 From 76bf3441ad6584ddc3aea1501927f21b21ba3a3a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Jun 2016 17:49:09 +0100 Subject: ata: sata_mv: fix mis-conversion in mv_write_cached_reg() Fix the signed issue in mv_write_cached_reg() where the laddr is assigned from a (long)addr instead of (unsigned long)addr. Fixes the following warnings: drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression Signed-off-by: Ben Dooks Signed-off-by: Tejun Heo diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index bd74ee5..745489a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -986,7 +986,7 @@ static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) * Looks like a lot of fuss, but it avoids an unnecessary * +1 usec read-after-write delay for unaffected registers. */ - laddr = (long)addr & 0xffff; + laddr = (unsigned long)addr & 0xffff; if (laddr >= 0x300 && laddr <= 0x33c) { laddr &= 0x000f; if (laddr == 0x4 || laddr == 0xc) { -- cgit v0.10.2 From f1d048f24e66ba85d3dabf3d076cefa5f2b546b0 Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Fri, 17 Jun 2016 06:35:57 -0400 Subject: tipc: fix socket timer deadlock We sometimes observe a 'deadly embrace' type deadlock occurring between mutually connected sockets on the same node. This happens when the one-hour peer supervision timers happen to expire simultaneously in both sockets. The scenario is as follows: CPU 1: CPU 2: -------- -------- tipc_sk_timeout(sk1) tipc_sk_timeout(sk2) lock(sk1.slock) lock(sk2.slock) msg_create(probe) msg_create(probe) unlock(sk1.slock) unlock(sk2.slock) tipc_node_xmit_skb() tipc_node_xmit_skb() tipc_node_xmit() tipc_node_xmit() tipc_sk_rcv(sk2) tipc_sk_rcv(sk1) lock(sk2.slock) lock((sk1.slock) filter_rcv() filter_rcv() tipc_sk_proto_rcv() tipc_sk_proto_rcv() msg_create(probe_rsp) msg_create(probe_rsp) tipc_sk_respond() tipc_sk_respond() tipc_node_xmit_skb() tipc_node_xmit_skb() tipc_node_xmit() tipc_node_xmit() tipc_sk_rcv(sk1) tipc_sk_rcv(sk2) lock((sk1.slock) lock((sk2.slock) ===> DEADLOCK ===> DEADLOCK Further analysis reveals that there are three different locations in the socket code where tipc_sk_respond() is called within the context of the socket lock, with ensuing risk of similar deadlocks. We now solve this by passing a buffer queue along with all upcalls where sk_lock.slock may potentially be held. Response or rejected message buffers are accumulated into this queue instead of being sent out directly, and only sent once we know we are safely outside the slock context. Reported-by: GUNA Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 88bfcd7..c49b8df 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -796,9 +796,11 @@ void tipc_sk_mcast_rcv(struct net *net, struct sk_buff_head *arrvq, * @tsk: receiving socket * @skb: pointer to message buffer. */ -static void tipc_sk_proto_rcv(struct tipc_sock *tsk, struct sk_buff *skb) +static void tipc_sk_proto_rcv(struct tipc_sock *tsk, struct sk_buff *skb, + struct sk_buff_head *xmitq) { struct sock *sk = &tsk->sk; + u32 onode = tsk_own_node(tsk); struct tipc_msg *hdr = buf_msg(skb); int mtyp = msg_type(hdr); bool conn_cong; @@ -811,7 +813,8 @@ static void tipc_sk_proto_rcv(struct tipc_sock *tsk, struct sk_buff *skb) if (mtyp == CONN_PROBE) { msg_set_type(hdr, CONN_PROBE_REPLY); - tipc_sk_respond(sk, skb, TIPC_OK); + if (tipc_msg_reverse(onode, &skb, TIPC_OK)) + __skb_queue_tail(xmitq, skb); return; } else if (mtyp == CONN_ACK) { conn_cong = tsk_conn_cong(tsk); @@ -1686,7 +1689,8 @@ static unsigned int rcvbuf_limit(struct sock *sk, struct sk_buff *skb) * * Returns true if message was added to socket receive queue, otherwise false */ -static bool filter_rcv(struct sock *sk, struct sk_buff *skb) +static bool filter_rcv(struct sock *sk, struct sk_buff *skb, + struct sk_buff_head *xmitq) { struct socket *sock = sk->sk_socket; struct tipc_sock *tsk = tipc_sk(sk); @@ -1696,7 +1700,7 @@ static bool filter_rcv(struct sock *sk, struct sk_buff *skb) int usr = msg_user(hdr); if (unlikely(msg_user(hdr) == CONN_MANAGER)) { - tipc_sk_proto_rcv(tsk, skb); + tipc_sk_proto_rcv(tsk, skb, xmitq); return false; } @@ -1739,7 +1743,8 @@ static bool filter_rcv(struct sock *sk, struct sk_buff *skb) return true; reject: - tipc_sk_respond(sk, skb, err); + if (tipc_msg_reverse(tsk_own_node(tsk), &skb, err)) + __skb_queue_tail(xmitq, skb); return false; } @@ -1755,9 +1760,24 @@ reject: static int tipc_backlog_rcv(struct sock *sk, struct sk_buff *skb) { unsigned int truesize = skb->truesize; + struct sk_buff_head xmitq; + u32 dnode, selector; - if (likely(filter_rcv(sk, skb))) + __skb_queue_head_init(&xmitq); + + if (likely(filter_rcv(sk, skb, &xmitq))) { atomic_add(truesize, &tipc_sk(sk)->dupl_rcvcnt); + return 0; + } + + if (skb_queue_empty(&xmitq)) + return 0; + + /* Send response/rejected message */ + skb = __skb_dequeue(&xmitq); + dnode = msg_destnode(buf_msg(skb)); + selector = msg_origport(buf_msg(skb)); + tipc_node_xmit_skb(sock_net(sk), skb, dnode, selector); return 0; } @@ -1771,12 +1791,13 @@ static int tipc_backlog_rcv(struct sock *sk, struct sk_buff *skb) * Caller must hold socket lock */ static void tipc_sk_enqueue(struct sk_buff_head *inputq, struct sock *sk, - u32 dport) + u32 dport, struct sk_buff_head *xmitq) { + unsigned long time_limit = jiffies + 2; + struct sk_buff *skb; unsigned int lim; atomic_t *dcnt; - struct sk_buff *skb; - unsigned long time_limit = jiffies + 2; + u32 onode; while (skb_queue_len(inputq)) { if (unlikely(time_after_eq(jiffies, time_limit))) @@ -1788,7 +1809,7 @@ static void tipc_sk_enqueue(struct sk_buff_head *inputq, struct sock *sk, /* Add message directly to receive queue if possible */ if (!sock_owned_by_user(sk)) { - filter_rcv(sk, skb); + filter_rcv(sk, skb, xmitq); continue; } @@ -1801,7 +1822,9 @@ static void tipc_sk_enqueue(struct sk_buff_head *inputq, struct sock *sk, continue; /* Overload => reject message back to sender */ - tipc_sk_respond(sk, skb, TIPC_ERR_OVERLOAD); + onode = tipc_own_addr(sock_net(sk)); + if (tipc_msg_reverse(onode, &skb, TIPC_ERR_OVERLOAD)) + __skb_queue_tail(xmitq, skb); break; } } @@ -1814,12 +1837,14 @@ static void tipc_sk_enqueue(struct sk_buff_head *inputq, struct sock *sk, */ void tipc_sk_rcv(struct net *net, struct sk_buff_head *inputq) { + struct sk_buff_head xmitq; u32 dnode, dport = 0; int err; struct tipc_sock *tsk; struct sock *sk; struct sk_buff *skb; + __skb_queue_head_init(&xmitq); while (skb_queue_len(inputq)) { dport = tipc_skb_peek_port(inputq, dport); tsk = tipc_sk_lookup(net, dport); @@ -1827,9 +1852,14 @@ void tipc_sk_rcv(struct net *net, struct sk_buff_head *inputq) if (likely(tsk)) { sk = &tsk->sk; if (likely(spin_trylock_bh(&sk->sk_lock.slock))) { - tipc_sk_enqueue(inputq, sk, dport); + tipc_sk_enqueue(inputq, sk, dport, &xmitq); spin_unlock_bh(&sk->sk_lock.slock); } + /* Send pending response/rejected messages, if any */ + while ((skb = __skb_dequeue(&xmitq))) { + dnode = msg_destnode(buf_msg(skb)); + tipc_node_xmit_skb(net, skb, dnode, dport); + } sock_put(sk); continue; } -- cgit v0.10.2 From 63dcdd35c1552ca0c911e98ba3389a0729a457f4 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:05 +0200 Subject: mlxsw: spectrum: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reviewed-by: Ido Schimmel Signed-off-by: Nogah Frankel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 6f9e3dd..660429e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -408,7 +408,11 @@ static netdev_tx_t mlxsw_sp_port_xmit(struct sk_buff *skb, } mlxsw_sp_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; + /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v0.10.2 From 4e239fac7c6b9d703e83c81b52ec9fec00c50129 Mon Sep 17 00:00:00 2001 From: Nogah Frankel Date: Fri, 17 Jun 2016 15:09:06 +0200 Subject: mlxsw: switchx2: Don't count internal TX header bytes to stats Stop the SW TX counter from counting the TX header bytes since they are not being sent out. Fixes: e577516b9db3 ("mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit") Signed-off-by: Nogah Frankel Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c index 3842eab..25f658b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c +++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c @@ -316,7 +316,10 @@ static netdev_tx_t mlxsw_sx_port_xmit(struct sk_buff *skb, } } mlxsw_sx_txhdr_construct(skb, &tx_info); - len = skb->len; + /* TX header is consumed by HW on the way so we shouldn't count its + * bytes as being sent. + */ + len = skb->len - MLXSW_TXHDR_LEN; /* Due to a race we might fail here because of a full queue. In that * unlikely case we simply drop the packet. */ -- cgit v0.10.2 From a9836cbb5fc885d3b8f3b91b2d47525f7269dec1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Jun 2016 18:15:30 +0200 Subject: net: tilegx: use correct timespec64 type The conversion to the 64-bit time based ptp methods left two instances of 'struct timespec' in place. This is harmless because 64-bit architectures define timespec64 as timespec, and this driver is not used on 32-bit machines. However, using 'struct timespec64' directly is obviously the right thing to do, and will help us remove 'struct timespec' in the future. Signed-off-by: Arnd Bergmann Fixes: b9acf24f779c ("ptp: tilegx: convert to the 64 bit get/set time methods.") Acked-by: Richard Cochran Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 0a15acc..11213a3 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -462,7 +462,7 @@ static void tile_tx_timestamp(struct sk_buff *skb, int instance) if (unlikely((shtx->tx_flags & SKBTX_HW_TSTAMP) != 0)) { struct mpipe_data *md = &mpipe_data[instance]; struct skb_shared_hwtstamps shhwtstamps; - struct timespec ts; + struct timespec64 ts; shtx->tx_flags |= SKBTX_IN_PROGRESS; gxio_mpipe_get_timestamp(&md->context, &ts); @@ -886,9 +886,9 @@ static struct ptp_clock_info ptp_mpipe_caps = { /* Sync mPIPE's timestamp up with Linux system time and register PTP clock. */ static void register_ptp_clock(struct net_device *dev, struct mpipe_data *md) { - struct timespec ts; + struct timespec64 ts; - getnstimeofday(&ts); + ktime_get_ts64(&ts); gxio_mpipe_set_timestamp(&md->context, &ts); mutex_init(&md->ptp_lock); -- cgit v0.10.2 From 3bb549ae4c51028c1930528ae9fcd6eca0474724 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Fri, 17 Jun 2016 16:12:12 -0400 Subject: RDS: TCP: rds_tcp_accept_one() should transition socket from RESETTING to UP The state of the rds_connection after rds_tcp_reset_callbacks() would be RDS_CONN_RESETTING and this is the value that should be passed by rds_tcp_accept_one() to rds_connect_path_complete() to transition the socket to RDS_CONN_UP. Fixes: b5c21c0947c1 ("RDS: TCP: fix race windows in send-path quiescence by rds_tcp_accept_one()") Signed-off-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c index 686b1d0..245542c 100644 --- a/net/rds/tcp_listen.c +++ b/net/rds/tcp_listen.c @@ -138,7 +138,7 @@ int rds_tcp_accept_one(struct socket *sock) rds_tcp_reset_callbacks(new_sock, conn); conn->c_outgoing = 0; /* rds_connect_path_complete() marks RDS_CONN_UP */ - rds_connect_path_complete(conn, RDS_CONN_DISCONNECTING); + rds_connect_path_complete(conn, RDS_CONN_RESETTING); } } else { rds_tcp_set_callbacks(new_sock, conn); -- cgit v0.10.2 From d4f56c7773483b8829e89cfc739b7a5a071f6da0 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Fri, 10 Jun 2016 23:38:20 +0530 Subject: i2c: qup: Fix wrong value of index variable index gets incremented during check to determine if the messages can be transferred with dma. But not reset after that, resulting in wrong start value in subsequent loop, causing failure. Fix it. Signed-off-by: Sricharan R Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index cc6439a..041050e 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -1268,6 +1268,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, } } + idx = 0; + do { if (msgs[idx].len == 0) { ret = -EINVAL; -- cgit v0.10.2 From 3720b69bafe9ccb989b9a8604f3e3f89b3610685 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Jun 2016 10:10:26 -0700 Subject: Input: add BUS_CEC type Inputs can come in over the HDMI CEC bus, so add a new type for this. Signed-off-by: Hans Verkuil Signed-off-by: Dmitry Torokhov diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 0111384..c514941 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -247,6 +247,7 @@ struct input_mask { #define BUS_ATARI 0x1B #define BUS_SPI 0x1C #define BUS_RMI 0x1D +#define BUS_CEC 0x1E /* * MT_TOOL types -- cgit v0.10.2 From 488326947cd1f038da8d2c9068a0d07b913b7983 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Sat, 18 Jun 2016 10:10:56 -0700 Subject: Input: add HDMI CEC specific keycodes Add HDMI CEC specific keycodes to the keycodes definition. Signed-off-by: Kamil Debski Signed-off-by: Hans Verkuil Signed-off-by: Dmitry Torokhov diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 87cf351..737fa32 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -611,6 +611,37 @@ #define KEY_KBDINPUTASSIST_ACCEPT 0x264 #define KEY_KBDINPUTASSIST_CANCEL 0x265 +/* Diagonal movement keys */ +#define KEY_RIGHT_UP 0x266 +#define KEY_RIGHT_DOWN 0x267 +#define KEY_LEFT_UP 0x268 +#define KEY_LEFT_DOWN 0x269 + +#define KEY_ROOT_MENU 0x26a /* Show Device's Root Menu */ +/* Show Top Menu of the Media (e.g. DVD) */ +#define KEY_MEDIA_TOP_MENU 0x26b +#define KEY_NUMERIC_11 0x26c +#define KEY_NUMERIC_12 0x26d +/* + * Toggle Audio Description: refers to an audio service that helps blind and + * visually impaired consumers understand the action in a program. Note: in + * some countries this is referred to as "Video Description". + */ +#define KEY_AUDIO_DESC 0x26e +#define KEY_3D_MODE 0x26f +#define KEY_NEXT_FAVORITE 0x270 +#define KEY_STOP_RECORD 0x271 +#define KEY_PAUSE_RECORD 0x272 +#define KEY_VOD 0x273 /* Video on Demand */ +#define KEY_UNMUTE 0x274 +#define KEY_FASTREVERSE 0x275 +#define KEY_SLOWREVERSE 0x276 +/* + * Control a data application associated with the currently viewed channel, + * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) + */ +#define KEY_DATA 0x275 + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 -- cgit v0.10.2 From 30172936eefb70c27fade1bc912a25fc90827b76 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sat, 18 Jun 2016 17:47:38 -0700 Subject: =?UTF-8?q?MAINTAINERS:=20add=20Pali=20Roh=C3=A1r=20as=20reviewer?= =?UTF-8?q?=20of=20ALPS=20PS/2=20touchpad=20driver?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov diff --git a/MAINTAINERS b/MAINTAINERS index 9c567a4..630151f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -596,6 +596,10 @@ S: Odd Fixes L: linux-alpha@vger.kernel.org F: arch/alpha/ +ALPS PS/2 TOUCHPAD DRIVER +R: Pali Rohár +F: drivers/input/mouse/alps.* + ALTERA MAILBOX DRIVER M: Ley Foon Tan L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers) -- cgit v0.10.2 From 4a7d99ea1b27734558feb6833f180cd38a159940 Mon Sep 17 00:00:00 2001 From: Basil Gunn Date: Thu, 16 Jun 2016 09:42:30 -0700 Subject: AX.25: Close socket connection on session completion A socket connection made in ax.25 is not closed when session is completed. The heartbeat timer is stopped prematurely and this is where the socket gets closed. Allow heatbeat timer to run to close socket. Symptom occurs in kernels >= 4.2.0 Originally sent 6/15/2016. Resend with distribution list matching scripts/maintainer.pl output. Signed-off-by: Basil Gunn Signed-off-by: David S. Miller diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index fbd0acf..2fdebab 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -976,7 +976,8 @@ static int ax25_release(struct socket *sock) release_sock(sk); ax25_disconnect(ax25, 0); lock_sock(sk); - ax25_destroy_socket(ax25); + if (!sock_flag(ax25->sk, SOCK_DESTROY)) + ax25_destroy_socket(ax25); break; case AX25_STATE_3: diff --git a/net/ax25/ax25_ds_timer.c b/net/ax25/ax25_ds_timer.c index 951cd57..5237dff 100644 --- a/net/ax25/ax25_ds_timer.c +++ b/net/ax25/ax25_ds_timer.c @@ -102,6 +102,7 @@ void ax25_ds_heartbeat_expiry(ax25_cb *ax25) switch (ax25->state) { case AX25_STATE_0: + case AX25_STATE_2: /* Magic here: If we listen() and a new link dies before it is accepted() it isn't 'dead' so doesn't get removed. */ if (!sk || sock_flag(sk, SOCK_DESTROY) || @@ -111,6 +112,7 @@ void ax25_ds_heartbeat_expiry(ax25_cb *ax25) sock_hold(sk); ax25_destroy_socket(ax25); bh_unlock_sock(sk); + /* Ungrab socket and destroy it */ sock_put(sk); } else ax25_destroy_socket(ax25); @@ -213,7 +215,8 @@ void ax25_ds_t1_timeout(ax25_cb *ax25) case AX25_STATE_2: if (ax25->n2count == ax25->n2) { ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND); - ax25_disconnect(ax25, ETIMEDOUT); + if (!sock_flag(ax25->sk, SOCK_DESTROY)) + ax25_disconnect(ax25, ETIMEDOUT); return; } else { ax25->n2count++; diff --git a/net/ax25/ax25_std_timer.c b/net/ax25/ax25_std_timer.c index 004467c9..2c0d6ef 100644 --- a/net/ax25/ax25_std_timer.c +++ b/net/ax25/ax25_std_timer.c @@ -38,6 +38,7 @@ void ax25_std_heartbeat_expiry(ax25_cb *ax25) switch (ax25->state) { case AX25_STATE_0: + case AX25_STATE_2: /* Magic here: If we listen() and a new link dies before it is accepted() it isn't 'dead' so doesn't get removed. */ if (!sk || sock_flag(sk, SOCK_DESTROY) || @@ -47,6 +48,7 @@ void ax25_std_heartbeat_expiry(ax25_cb *ax25) sock_hold(sk); ax25_destroy_socket(ax25); bh_unlock_sock(sk); + /* Ungrab socket and destroy it */ sock_put(sk); } else ax25_destroy_socket(ax25); @@ -144,7 +146,8 @@ void ax25_std_t1timer_expiry(ax25_cb *ax25) case AX25_STATE_2: if (ax25->n2count == ax25->n2) { ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND); - ax25_disconnect(ax25, ETIMEDOUT); + if (!sock_flag(ax25->sk, SOCK_DESTROY)) + ax25_disconnect(ax25, ETIMEDOUT); return; } else { ax25->n2count++; diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c index 3b78e84..655a7d4 100644 --- a/net/ax25/ax25_subr.c +++ b/net/ax25/ax25_subr.c @@ -264,7 +264,8 @@ void ax25_disconnect(ax25_cb *ax25, int reason) { ax25_clear_queues(ax25); - ax25_stop_heartbeat(ax25); + if (!sock_flag(ax25->sk, SOCK_DESTROY)) + ax25_stop_heartbeat(ax25); ax25_stop_t1timer(ax25); ax25_stop_t2timer(ax25); ax25_stop_t3timer(ax25); -- cgit v0.10.2 From 5c3da57d70f1ef1d9b60900b84a74d77a9cf0774 Mon Sep 17 00:00:00 2001 From: Joshua Houghton Date: Sat, 18 Jun 2016 15:46:31 +0000 Subject: net: rds: fix coding style issues Fix coding style issues in the following files: ib_cm.c: add space loop.c: convert spaces to tabs sysctl.c: add space tcp.h: convert spaces to tabs tcp_connect.c:remove extra indentation in switch statement tcp_recv.c: convert spaces to tabs tcp_send.c: convert spaces to tabs transport.c: move brace up one line on for statement Signed-off-by: Joshua Houghton Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 310cabc..7c2a65a 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -111,7 +111,7 @@ void rds_ib_cm_connect_complete(struct rds_connection *conn, struct rdma_cm_even } } - if (conn->c_version < RDS_PROTOCOL(3,1)) { + if (conn->c_version < RDS_PROTOCOL(3, 1)) { printk(KERN_NOTICE "RDS/IB: Connection to %pI4 version %u.%u failed," " no longer supported\n", &conn->c_faddr, diff --git a/net/rds/loop.c b/net/rds/loop.c index 6b12b68..814173b 100644 --- a/net/rds/loop.c +++ b/net/rds/loop.c @@ -95,8 +95,9 @@ out: */ static void rds_loop_inc_free(struct rds_incoming *inc) { - struct rds_message *rm = container_of(inc, struct rds_message, m_inc); - rds_message_put(rm); + struct rds_message *rm = container_of(inc, struct rds_message, m_inc); + + rds_message_put(rm); } /* we need to at least give the thread something to succeed */ diff --git a/net/rds/sysctl.c b/net/rds/sysctl.c index c173f69..e381bbc 100644 --- a/net/rds/sysctl.c +++ b/net/rds/sysctl.c @@ -102,7 +102,8 @@ int rds_sysctl_init(void) rds_sysctl_reconnect_min = msecs_to_jiffies(1); rds_sysctl_reconnect_min_jiffies = rds_sysctl_reconnect_min; - rds_sysctl_reg_table = register_net_sysctl(&init_net,"net/rds", rds_sysctl_rds_table); + rds_sysctl_reg_table = + register_net_sysctl(&init_net, "net/rds", rds_sysctl_rds_table); if (!rds_sysctl_reg_table) return -ENOMEM; return 0; diff --git a/net/rds/tcp.h b/net/rds/tcp.h index ec0602b..7940bab 100644 --- a/net/rds/tcp.h +++ b/net/rds/tcp.h @@ -83,7 +83,7 @@ int rds_tcp_inc_copy_to_user(struct rds_incoming *inc, struct iov_iter *to); void rds_tcp_xmit_prepare(struct rds_connection *conn); void rds_tcp_xmit_complete(struct rds_connection *conn); int rds_tcp_xmit(struct rds_connection *conn, struct rds_message *rm, - unsigned int hdr_off, unsigned int sg, unsigned int off); + unsigned int hdr_off, unsigned int sg, unsigned int off); void rds_tcp_write_space(struct sock *sk); /* tcp_stats.c */ diff --git a/net/rds/tcp_connect.c b/net/rds/tcp_connect.c index fba13d0..f6e95d6 100644 --- a/net/rds/tcp_connect.c +++ b/net/rds/tcp_connect.c @@ -54,19 +54,19 @@ void rds_tcp_state_change(struct sock *sk) rdsdebug("sock %p state_change to %d\n", tc->t_sock, sk->sk_state); - switch(sk->sk_state) { - /* ignore connecting sockets as they make progress */ - case TCP_SYN_SENT: - case TCP_SYN_RECV: - break; - case TCP_ESTABLISHED: - rds_connect_path_complete(conn, RDS_CONN_CONNECTING); - break; - case TCP_CLOSE_WAIT: - case TCP_CLOSE: - rds_conn_drop(conn); - default: - break; + switch (sk->sk_state) { + /* ignore connecting sockets as they make progress */ + case TCP_SYN_SENT: + case TCP_SYN_RECV: + break; + case TCP_ESTABLISHED: + rds_connect_path_complete(conn, RDS_CONN_CONNECTING); + break; + case TCP_CLOSE_WAIT: + case TCP_CLOSE: + rds_conn_drop(conn); + default: + break; } out: read_unlock_bh(&sk->sk_callback_lock); diff --git a/net/rds/tcp_recv.c b/net/rds/tcp_recv.c index c3196f9..6e6a711 100644 --- a/net/rds/tcp_recv.c +++ b/net/rds/tcp_recv.c @@ -171,7 +171,7 @@ static int rds_tcp_data_recv(read_descriptor_t *desc, struct sk_buff *skb, while (left) { if (!tinc) { tinc = kmem_cache_alloc(rds_tcp_incoming_slab, - arg->gfp); + arg->gfp); if (!tinc) { desc->error = -ENOMEM; goto out; diff --git a/net/rds/tcp_send.c b/net/rds/tcp_send.c index 22d0f20..618be69 100644 --- a/net/rds/tcp_send.c +++ b/net/rds/tcp_send.c @@ -66,19 +66,19 @@ void rds_tcp_xmit_complete(struct rds_connection *conn) static int rds_tcp_sendmsg(struct socket *sock, void *data, unsigned int len) { struct kvec vec = { - .iov_base = data, - .iov_len = len, + .iov_base = data, + .iov_len = len, + }; + struct msghdr msg = { + .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL, }; - struct msghdr msg = { - .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL, - }; return kernel_sendmsg(sock, &msg, &vec, 1, vec.iov_len); } /* the core send_sem serializes this with other xmit and shutdown */ int rds_tcp_xmit(struct rds_connection *conn, struct rds_message *rm, - unsigned int hdr_off, unsigned int sg, unsigned int off) + unsigned int hdr_off, unsigned int sg, unsigned int off) { struct rds_tcp_connection *tc = conn->c_transport_data; int done = 0; @@ -196,7 +196,7 @@ void rds_tcp_write_space(struct sock *sk) tc->t_last_seen_una = rds_tcp_snd_una(tc); rds_send_drop_acked(conn, rds_tcp_snd_una(tc), rds_tcp_is_acked); - if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) + if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) queue_delayed_work(rds_wq, &conn->c_send_w, 0); out: diff --git a/net/rds/transport.c b/net/rds/transport.c index f3afd1d..2ffd3e30 100644 --- a/net/rds/transport.c +++ b/net/rds/transport.c @@ -140,8 +140,7 @@ unsigned int rds_trans_stats_info_copy(struct rds_info_iterator *iter, rds_info_iter_unmap(iter); down_read(&rds_trans_sem); - for (i = 0; i < RDS_TRANS_COUNT; i++) - { + for (i = 0; i < RDS_TRANS_COUNT; i++) { trans = transports[i]; if (!trans || !trans->stats_info_copy) continue; -- cgit v0.10.2 From 5abe9b26847c65a698f38744a52635b287514294 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 7 Jun 2016 16:52:27 -0700 Subject: i2c: remove __init from i2c_register_board_info() As of next-20160607 with allyesconfig we get this linker failure: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x21bc0d): Section mismatch in reference from the function intel_scu_devices_create() to the function .init.text:i2c_register_board_info() This is caused by the fact that intel_scu_devices_create() calls i2c_register_board_info() and intel_scu_devices_create() is not annotated with __init. This typically involves manual code inspection and if one is certain this is correct we would just peg intel_scu_devices_create() with a __ref annotation. In this case this would be wrong though as the intel_scu_devices_create() call is exported, and used in the ipc_probe() on drivers/platform/x86/intel_scu_ipc.c. The issue is that even though builtin_pci_driver(ipc_driver) is used this just exposes the probe routine, which can occur at any point in time if this bus supports hotplug. A race can happen between kernel_init_freeable() that calls the init calls (in this case registeres the intel_scu_ipc.c driver, and later free_initmem(), which would free the i2c_register_board_info(). If a probe happens later in boot i2c_register_board_info() would not be present and we should get a page fault. Signed-off-by: Luis R. Rodriguez [wsa: made function declaration a one-liner] Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index e33022e..6e5fac6 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -56,9 +56,7 @@ EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num); * The board info passed can safely be __initdata, but be careful of embedded * pointers (for platform_data, functions, etc) since that won't be copied. */ -int __init -i2c_register_board_info(int busnum, - struct i2c_board_info const *info, unsigned len) +int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len) { int status; -- cgit v0.10.2 From e6bd89232b4a4c9282da1ac8bdd798c2a30d9a46 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:11 +0300 Subject: qed: Correct default vlan behavior When no vlan filter is configured, firmware has a configurable default on whether to pass only untagged packets or all packets regardless of their tagging. Driver currently doesn't set this field in the necessary ramrod, causing the default to always be 'receive all'. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 8fba87dd..7c199a9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -72,6 +72,7 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, p_ramrod->mtu = cpu_to_le16(p_params->mtu); p_ramrod->inner_vlan_removal_en = p_params->remove_inner_vlan; p_ramrod->drop_ttl0_en = p_params->drop_ttl0; + p_ramrod->untagged = p_params->only_untagged; SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_UCAST_DROP_ALL, 1); SET_FIELD(rx_mode, ETH_VPORT_RX_MODE_MCAST_DROP_ALL, 1); -- cgit v0.10.2 From 326439883e17fca029f4ed05307480bdb6369877 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:12 +0300 Subject: qed: Prevent VF from Tx-switching 'promisc' Internal loopback in driver is based on two things - first is the willingness of transmitter to use it [in case of VFs, this can be forced based on VEPA/VEB] and secondly on another vport classification configuration which should match the packet's destination. Current code allows non-linux VFs to configure a 'promisc' mode on Tx, meaning all traffic sent by VF would be loopbacked internally by firmware; This isn't considered a valid mode and as such should be prevented by PF. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7c199a9..7e7ae83 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -248,10 +248,6 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn, SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); - SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL, - (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) && - !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED))); - SET_FIELD(state, ETH_VPORT_TX_MODE_MCAST_DROP_ALL, !!(accept_filter & QED_ACCEPT_NONE)); -- cgit v0.10.2 From a0d26d5a4fc8e13993279f788deeb08069e73b69 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:13 +0300 Subject: qed*: Don't reset statistics on inner reload Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 7e7ae83..aada4c7 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -1745,7 +1745,8 @@ static int qed_start_vport(struct qed_dev *cdev, start.vport_id, start.mtu); } - qed_reset_vport_stats(cdev); + if (params->clear_stats) + qed_reset_vport_stats(cdev); return 0; } diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5733d18..f8e11f9 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -3231,7 +3231,7 @@ static int qede_stop_queues(struct qede_dev *edev) return rc; } -static int qede_start_queues(struct qede_dev *edev) +static int qede_start_queues(struct qede_dev *edev, bool clear_stats) { int rc, tc, i; int vlan_removal_en = 1; @@ -3462,6 +3462,7 @@ out: enum qede_load_mode { QEDE_LOAD_NORMAL, + QEDE_LOAD_RELOAD, }; static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) @@ -3500,7 +3501,7 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode) goto err3; DP_INFO(edev, "Setup IRQs succeeded\n"); - rc = qede_start_queues(edev); + rc = qede_start_queues(edev, mode != QEDE_LOAD_RELOAD); if (rc) goto err4; DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n"); @@ -3555,7 +3556,7 @@ void qede_reload(struct qede_dev *edev, if (func) func(edev, args); - qede_load(edev, QEDE_LOAD_NORMAL); + qede_load(edev, QEDE_LOAD_RELOAD); mutex_lock(&edev->qede_lock); qede_config_rx_mode(edev->ndev); diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h index 6ae8cb4..6c876a6 100644 --- a/include/linux/qed/qed_eth_if.h +++ b/include/linux/qed/qed_eth_if.h @@ -49,6 +49,7 @@ struct qed_start_vport_params { bool drop_ttl0; u8 vport_id; u16 mtu; + bool clear_stats; }; struct qed_stop_rxq_params { -- cgit v0.10.2 From db511c37d4eb2b4e7312791eb8f9b34ed867445e Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:14 +0300 Subject: qed: Fix returning unlimited SPQ entries Driver has 2 sets of entries for handling ramrod configurations toward firmware - a regular pre-allocated set of entires and a possible 'unlimited' list of additional pending entries. In most scenarios the 'unlimited' list would not be used, but when it does the handling of the ramrod completion doesn't properly handle the release of the entry. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index acac662..67d9893 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -614,7 +614,9 @@ qed_spq_add_entry(struct qed_hwfn *p_hwfn, *p_en2 = *p_ent; - kfree(p_ent); + /* EBLOCK responsible to free the allocated p_ent */ + if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK) + kfree(p_ent); p_ent = p_en2; } @@ -749,6 +751,15 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, * Thus, after gaining the answer perform the cleanup here. */ rc = qed_spq_block(p_hwfn, p_ent, fw_return_code); + + if (p_ent->queue == &p_spq->unlimited_pending) { + /* This is an allocated p_ent which does not need to + * return to pool. + */ + kfree(p_ent); + return rc; + } + if (rc) goto spq_post_fail2; @@ -844,8 +855,12 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, found->comp_cb.function(p_hwfn, found->comp_cb.cookie, p_data, fw_return_code); - if (found->comp_mode != QED_SPQ_MODE_EBLOCK) - /* EBLOCK is responsible for freeing its own entry */ + if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) || + (found->queue == &p_spq->unlimited_pending)) + /* EBLOCK is responsible for returning its own entry into the + * free list, unless it originally added the entry into the + * unlimited pending list. + */ qed_spq_return_entry(p_hwfn, found); /* Attempt to post pending requests */ -- cgit v0.10.2 From b639f197210d37905a6018ae4297659eb3f48f8f Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 19 Jun 2016 15:18:15 +0300 Subject: qed: Add missing port-mode The 'MODULE_FIBER' value replaced several other FIBER values in newer management firmware images, so existing code would fail to properly reflect its mode. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 9afc15f..e29ed5a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -3700,6 +3700,7 @@ struct public_port { #define MEDIA_DA_TWINAX 0x3 #define MEDIA_BASE_T 0x4 #define MEDIA_SFP_1G_FIBER 0x5 +#define MEDIA_MODULE_FIBER 0x6 #define MEDIA_KR 0xf0 #define MEDIA_NOT_PRESENT 0xff diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 61cc686..c7e01b3 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1085,6 +1085,7 @@ static int qed_get_port_type(u32 media_type) case MEDIA_SFPP_10G_FIBER: case MEDIA_SFP_1G_FIBER: case MEDIA_XFP_FIBER: + case MEDIA_MODULE_FIBER: case MEDIA_KR: port_type = PORT_FIBRE; break; -- cgit v0.10.2 From 427460c83cdf55069eee49799a0caef7dde8df69 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 16 Jun 2016 11:10:19 -0500 Subject: can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek Signed-off-by: Thor Thayer Cc: Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index f91b094..e3dccd3 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -332,9 +332,23 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); - for (i = 0; i < frame->can_dlc; i += 2) { - priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2, - frame->data[i] | (frame->data[i + 1] << 8)); + if (priv->type == BOSCH_D_CAN) { + u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface); + + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = (u32)frame->data[i]; + data |= (u32)frame->data[i + 1] << 8; + data |= (u32)frame->data[i + 2] << 16; + data |= (u32)frame->data[i + 3] << 24; + priv->write_reg32(priv, dreg, data); + } + } else { + for (i = 0; i < frame->can_dlc; i += 2) { + priv->write_reg(priv, + C_CAN_IFACE(DATA1_REG, iface) + i / 2, + frame->data[i] | + (frame->data[i + 1] << 8)); + } } } @@ -402,10 +416,20 @@ static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) } else { int i, dreg = C_CAN_IFACE(DATA1_REG, iface); - for (i = 0; i < frame->can_dlc; i += 2, dreg ++) { - data = priv->read_reg(priv, dreg); - frame->data[i] = data; - frame->data[i + 1] = data >> 8; + if (priv->type == BOSCH_D_CAN) { + for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) { + data = priv->read_reg32(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + frame->data[i + 2] = data >> 16; + frame->data[i + 3] = data >> 24; + } + } else { + for (i = 0; i < frame->can_dlc; i += 2, dreg++) { + data = priv->read_reg(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + } } } -- cgit v0.10.2 From 43200a4480cbbe660309621817f54cbb93907108 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Mon, 13 Jun 2016 15:44:19 +0200 Subject: can: at91_can: RX queue could get stuck at high bus load At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger Tested-by: Amr Bekhit Cc: Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 8b3275d..8f5e93c 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -712,9 +712,10 @@ static int at91_poll_rx(struct net_device *dev, int quota) /* upper group completed, look again in lower */ if (priv->rx_next > get_mb_rx_low_last(priv) && - quota > 0 && mb > get_mb_rx_last(priv)) { + mb > get_mb_rx_last(priv)) { priv->rx_next = get_mb_rx_first(priv); - goto again; + if (quota > 0) + goto again; } return received; -- cgit v0.10.2 From f155d9c0a138463c3c9380d35e54e433c1477336 Mon Sep 17 00:00:00 2001 From: Maximilian Schneider Date: Wed, 8 Jun 2016 18:00:26 +0000 Subject: can: gs_usb: Add Basic support for the bytewerk.org candleLight interface This patchs adds basic support for the bytewerk.org candleLight interface, a open hardware (CERN OHL) USB CAN adapter. Signed-off-by: Hubert Denkmair Signed-off-by: Maximilian Schneider Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index bcb272f..2ff0df3 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -16,7 +16,8 @@ config CAN_ESD_USB2 config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" ---help--- - This driver supports the Geschwister Schneider USB/CAN devices. + This driver supports the Geschwister Schneider and bytewerk.org + candleLight USB CAN interfaces USB/CAN devices If unsure choose N, choose Y for built in support, M to compile as module (module will be named: gs_usb). diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 1556d42..acb0c84 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -1,7 +1,9 @@ -/* CAN driver for Geschwister Schneider USB/CAN devices. +/* CAN driver for Geschwister Schneider USB/CAN devices + * and bytewerk.org candleLight USB CAN interfaces. * - * Copyright (C) 2013 Geschwister Schneider Technologie-, + * Copyright (C) 2013-2016 Geschwister Schneider Technologie-, * Entwicklungs- und Vertriebs UG (Haftungsbeschränkt). + * Copyright (C) 2016 Hubert Denkmair * * Many thanks to all socketcan devs! * @@ -29,6 +31,9 @@ #define USB_GSUSB_1_VENDOR_ID 0x1d50 #define USB_GSUSB_1_PRODUCT_ID 0x606f +#define USB_CANDLELIGHT_VENDOR_ID 0x1209 +#define USB_CANDLELIGHT_PRODUCT_ID 0x2323 + #define GSUSB_ENDPOINT_IN 1 #define GSUSB_ENDPOINT_OUT 2 @@ -952,6 +957,8 @@ static void gs_usb_disconnect(struct usb_interface *intf) static const struct usb_device_id gs_usb_table[] = { { USB_DEVICE_INTERFACE_NUMBER(USB_GSUSB_1_VENDOR_ID, USB_GSUSB_1_PRODUCT_ID, 0) }, + { USB_DEVICE_INTERFACE_NUMBER(USB_CANDLELIGHT_VENDOR_ID, + USB_CANDLELIGHT_PRODUCT_ID, 0) }, {} /* Terminating entry */ }; @@ -969,5 +976,6 @@ module_usb_driver(gs_usb_driver); MODULE_AUTHOR("Maximilian Schneider "); MODULE_DESCRIPTION( "Socket CAN device driver for Geschwister Schneider Technologie-, " -"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces."); +"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces\n" +"and bytewerk.org candleLight USB CAN interfaces."); MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From c39341cf0d08357f448f4c2fffe2ebcc9495fd01 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Sep 2015 14:15:21 +0200 Subject: ecryptfs: drop null test before destroy functions Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // Signed-off-by: Julia Lawall Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 1698132..6120044 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -738,8 +738,7 @@ static void ecryptfs_free_kmem_caches(void) struct ecryptfs_cache_info *info; info = &ecryptfs_cache_infos[i]; - if (*(info->cache)) - kmem_cache_destroy(*(info->cache)); + kmem_cache_destroy(*(info->cache)); } } -- cgit v0.10.2 From 5f9f2c2abd16fcea6cf7cf87791a24687e2fc345 Mon Sep 17 00:00:00 2001 From: Wei Yuan Date: Wed, 17 Feb 2016 14:50:10 +0800 Subject: eCryptfs: fix typos in comment Signed-off-by: Weiyuan Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 0d8eb34..6a69b55 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -45,7 +45,7 @@ * ecryptfs_to_hex * @dst: Buffer to take hex character representation of contents of * src; must be at least of size (src_size * 2) - * @src: Buffer to be converted to a hex string respresentation + * @src: Buffer to be converted to a hex string representation * @src_size: number of bytes to convert */ void ecryptfs_to_hex(char *dst, char *src, size_t src_size) @@ -60,7 +60,7 @@ void ecryptfs_to_hex(char *dst, char *src, size_t src_size) * ecryptfs_from_hex * @dst: Buffer to take the bytes from src hex; must be at least of * size (src_size / 2) - * @src: Buffer to be converted from a hex string respresentation to raw value + * @src: Buffer to be converted from a hex string representation to raw value * @dst_size: size of dst buffer, or number of hex characters pairs to convert */ void ecryptfs_from_hex(char *dst, char *src, int dst_size) -- cgit v0.10.2 From 40f0fd372a623e8d32bae0b9361d2a7453ae7a2e Mon Sep 17 00:00:00 2001 From: Chris J Arges Date: Thu, 9 Jun 2016 15:31:29 -0500 Subject: ecryptfs: fix spelling mistakes Noticed some minor spelling errors when looking through the code. Signed-off-by: Chris J Arges Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 6a69b55..e5e29f8 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -953,7 +953,7 @@ struct ecryptfs_cipher_code_str_map_elem { }; /* Add support for additional ciphers by adding elements here. The - * cipher_code is whatever OpenPGP applicatoins use to identify the + * cipher_code is whatever OpenPGP applications use to identify the * ciphers. List in order of probability. */ static struct ecryptfs_cipher_code_str_map_elem ecryptfs_cipher_code_str_map[] = { @@ -1410,7 +1410,7 @@ int ecryptfs_read_and_validate_xattr_region(struct dentry *dentry, * * Common entry point for reading file metadata. From here, we could * retrieve the header information from the header region of the file, - * the xattr region of the file, or some other repostory that is + * the xattr region of the file, or some other repository that is * stored separately from the file itself. The current implementation * supports retrieving the metadata information from the file contents * and from the xattr region. diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 7000b96..53d0141 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -171,7 +171,7 @@ out: /** * ecryptfs_open - * @inode: inode speciying file to open + * @inode: inode specifying file to open * @file: Structure to return filled in * * Opens the file specified by inode. @@ -240,7 +240,7 @@ out: /** * ecryptfs_dir_open - * @inode: inode speciying file to open + * @inode: inode specifying file to open * @file: Structure to return filled in * * Opens the file specified by inode. -- cgit v0.10.2 From 274f5b041d3c9c0974a7dd1f66b67c33bb5b0f42 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2016 18:55:57 -0400 Subject: dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock Make sure that directory is locked shared in dcache_dir_lseek(); for dcache_readdir() it's already tru, and that's enough to make simple_positive() stable. Signed-off-by: Al Viro diff --git a/fs/libfs.c b/fs/libfs.c index cedeacb..f56acb1 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -103,6 +103,7 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence) struct dentry *cursor = file->private_data; loff_t n = file->f_pos - 2; + inode_lock_shared(dentry->d_inode); spin_lock(&dentry->d_lock); /* d_lock not required for cursor */ list_del(&cursor->d_child); @@ -110,14 +111,13 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence) while (n && p != &dentry->d_subdirs) { struct dentry *next; next = list_entry(p, struct dentry, d_child); - spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED); if (simple_positive(next)) n--; - spin_unlock(&next->d_lock); p = p->next; } list_add_tail(&cursor->d_child, p); spin_unlock(&dentry->d_lock); + inode_unlock_shared(dentry->d_inode); } } return offset; @@ -150,22 +150,16 @@ int dcache_readdir(struct file *file, struct dir_context *ctx) for (p = q->next; p != &dentry->d_subdirs; p = p->next) { struct dentry *next = list_entry(p, struct dentry, d_child); - spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED); - if (!simple_positive(next)) { - spin_unlock(&next->d_lock); + if (!simple_positive(next)) continue; - } - spin_unlock(&next->d_lock); spin_unlock(&dentry->d_lock); if (!dir_emit(ctx, next->d_name.name, next->d_name.len, d_inode(next)->i_ino, dt_type(d_inode(next)))) return 0; spin_lock(&dentry->d_lock); - spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED); /* next is still alive */ list_move(q, p); - spin_unlock(&next->d_lock); p = q; ctx->pos++; } -- cgit v0.10.2 From 4f42c1b5b9c27b6228e6b9c57eee4beb3118b6b0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2016 19:37:13 -0400 Subject: libfs.c: new helper - next_positive() Return nth positive child after given or NULL if there's less than n left. dcache_readdir() and dcache_dir_lseek() switched to it. Signed-off-by: Al Viro diff --git a/fs/libfs.c b/fs/libfs.c index f56acb1..b05b74a 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -84,6 +84,39 @@ int dcache_dir_close(struct inode *inode, struct file *file) } EXPORT_SYMBOL(dcache_dir_close); +/* parent is locked at least shared */ +static struct dentry *next_positive(struct dentry *parent, + struct list_head *from, + int count) +{ + struct dentry *res = NULL; + struct list_head *p; + + spin_lock(&parent->d_lock); + for (p = from->next; p != &parent->d_subdirs; p = p->next) { + struct dentry *d = list_entry(p, struct dentry, d_child); + if (simple_positive(d) && !--count) { + res = d; + break; + } + } + spin_unlock(&parent->d_lock); + return res; +} + +static void move_cursor(struct dentry *cursor, struct list_head *after) +{ + struct dentry *parent = cursor->d_parent; + + spin_lock(&parent->d_lock); + __list_del(cursor->d_child.prev, cursor->d_child.next); + if (after) + list_add(&cursor->d_child, after); + else + list_add_tail(&cursor->d_child, &parent->d_subdirs); + spin_unlock(&parent->d_lock); +} + loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence) { struct dentry *dentry = file->f_path.dentry; @@ -99,24 +132,13 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence) if (offset != file->f_pos) { file->f_pos = offset; if (file->f_pos >= 2) { - struct list_head *p; struct dentry *cursor = file->private_data; + struct dentry *to; loff_t n = file->f_pos - 2; inode_lock_shared(dentry->d_inode); - spin_lock(&dentry->d_lock); - /* d_lock not required for cursor */ - list_del(&cursor->d_child); - p = dentry->d_subdirs.next; - while (n && p != &dentry->d_subdirs) { - struct dentry *next; - next = list_entry(p, struct dentry, d_child); - if (simple_positive(next)) - n--; - p = p->next; - } - list_add_tail(&cursor->d_child, p); - spin_unlock(&dentry->d_lock); + to = next_positive(dentry, &dentry->d_subdirs, n); + move_cursor(cursor, to ? &to->d_child : NULL); inode_unlock_shared(dentry->d_inode); } } @@ -140,30 +162,25 @@ int dcache_readdir(struct file *file, struct dir_context *ctx) { struct dentry *dentry = file->f_path.dentry; struct dentry *cursor = file->private_data; - struct list_head *p, *q = &cursor->d_child; + struct list_head *p = &cursor->d_child; + struct dentry *next; + bool moved = false; if (!dir_emit_dots(file, ctx)) return 0; - spin_lock(&dentry->d_lock); - if (ctx->pos == 2) - list_move(q, &dentry->d_subdirs); - for (p = q->next; p != &dentry->d_subdirs; p = p->next) { - struct dentry *next = list_entry(p, struct dentry, d_child); - if (!simple_positive(next)) - continue; - - spin_unlock(&dentry->d_lock); + if (ctx->pos == 2) + p = &dentry->d_subdirs; + while ((next = next_positive(dentry, p, 1)) != NULL) { if (!dir_emit(ctx, next->d_name.name, next->d_name.len, d_inode(next)->i_ino, dt_type(d_inode(next)))) - return 0; - spin_lock(&dentry->d_lock); - /* next is still alive */ - list_move(q, p); - p = q; + break; + moved = true; + p = &next->d_child; ctx->pos++; } - spin_unlock(&dentry->d_lock); + if (moved) + move_cursor(cursor, p); return 0; } EXPORT_SYMBOL(dcache_readdir); -- cgit v0.10.2 From ebaaa80e8f20ff2cbbccd6823f73a99565487502 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Jun 2016 20:55:34 -0400 Subject: lockless next_positive() Signed-off-by: Al Viro diff --git a/fs/libfs.c b/fs/libfs.c index b05b74a..74dc8b9 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -89,31 +89,53 @@ static struct dentry *next_positive(struct dentry *parent, struct list_head *from, int count) { - struct dentry *res = NULL; + unsigned *seq = &parent->d_inode->i_dir_seq, n; + struct dentry *res; struct list_head *p; + bool skipped; + int i; - spin_lock(&parent->d_lock); +retry: + i = count; + skipped = false; + n = smp_load_acquire(seq) & ~1; + res = NULL; + rcu_read_lock(); for (p = from->next; p != &parent->d_subdirs; p = p->next) { struct dentry *d = list_entry(p, struct dentry, d_child); - if (simple_positive(d) && !--count) { + if (!simple_positive(d)) { + skipped = true; + } else if (!--i) { res = d; break; } } - spin_unlock(&parent->d_lock); + rcu_read_unlock(); + if (skipped) { + smp_rmb(); + if (unlikely(*seq != n)) + goto retry; + } return res; } static void move_cursor(struct dentry *cursor, struct list_head *after) { struct dentry *parent = cursor->d_parent; - + unsigned n, *seq = &parent->d_inode->i_dir_seq; spin_lock(&parent->d_lock); + for (;;) { + n = *seq; + if (!(n & 1) && cmpxchg(seq, n, n + 1) == n) + break; + cpu_relax(); + } __list_del(cursor->d_child.prev, cursor->d_child.next); if (after) list_add(&cursor->d_child, after); else list_add_tail(&cursor->d_child, &parent->d_subdirs); + smp_store_release(seq, n + 2); spin_unlock(&parent->d_lock); } -- cgit v0.10.2 From a5e9b85a6540df6c4074d3a56674f6fb6c5fc830 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 17 Jun 2016 17:24:23 +0000 Subject: clk: Fix return value check in oxnas_stdclk_probe() In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Neil Armstrong Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c index efba7d4..79bcb2e 100644 --- a/drivers/clk/clk-oxnas.c +++ b/drivers/clk/clk-oxnas.c @@ -144,9 +144,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev) return -ENOMEM; regmap = syscon_node_to_regmap(of_get_parent(np)); - if (!regmap) { + if (IS_ERR(regmap)) { dev_err(&pdev->dev, "failed to have parent regmap\n"); - return -EINVAL; + return PTR_ERR(regmap); } for (i = 0; i < ARRAY_SIZE(clk_oxnas_init); i++) { -- cgit v0.10.2 From 04e59a0211ff012ba60c00baca673482570784e9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 18 Jun 2016 11:31:33 +0200 Subject: phy-sun4i-usb: Fix irq free conditions to match request conditions commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 7390294..de3101f 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -514,9 +514,9 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev) if (data->vbus_power_nb_registered) power_supply_unreg_notifier(&data->vbus_power_nb); - if (data->id_det_irq >= 0) + if (data->id_det_irq > 0) devm_free_irq(dev, data->id_det_irq, data); - if (data->vbus_det_irq >= 0) + if (data->vbus_det_irq > 0) devm_free_irq(dev, data->vbus_det_irq, data); cancel_delayed_work_sync(&data->detect); -- cgit v0.10.2 From b3b630b26ae87a54e2f396b459aab0cd2286fc77 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 20 Jun 2016 22:57:22 +0200 Subject: ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists Now that we've a clock node describing pll3 we must add it to the simplefb nodes clocks lists to avoid it getting turned off when simplefb is used. This fixes the screen going black when using simplefb. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index a03e56f..ca58eb2 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -65,8 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>, + <&dram_gates 26>; status = "disabled"; }; @@ -74,8 +75,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&ahb_gates 46>, + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>, + <&ahb_gates 46>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -84,9 +86,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>, <&dram_gates 25>, - <&dram_gates 26>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 44>, <&ahb_gates 46>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -94,8 +96,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, + <&ahb_gates 36>, <&ahb_gates 44>, + <&ahb_gates 46>, <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index bddd0de..367f330 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -65,8 +65,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; }; @@ -74,7 +74,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 44>; status = "disabled"; }; @@ -82,8 +83,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, + <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index febdf4c..f480051 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -67,8 +67,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>, + <&dram_gates 26>; status = "disabled"; }; @@ -76,8 +77,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, - <&dram_gates 26>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 44>, <&dram_gates 26>; status = "disabled"; }; @@ -85,7 +86,7 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; -- cgit v0.10.2 From ba562d5e54fd3136bfea0457add3675850247774 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 1 Jun 2016 22:21:53 +0300 Subject: pinctrl: imx: Do not treat a PIN without MUX register as an error Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47ccfcc..eccb474 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -209,9 +209,9 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, pin_reg = &info->pin_regs[pin_id]; if (pin_reg->mux_reg == -1) { - dev_err(ipctl->dev, "Pin(%s) does not support mux function\n", + dev_dbg(ipctl->dev, "Pin(%s) does not support mux function\n", info->pins[pin_id].name); - return -EINVAL; + continue; } if (info->flags & SHARE_MUX_CONF_REG) { -- cgit v0.10.2 From 0ac3c0a4025f41748a083bdd4970cb3ede802b15 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 14:17:06 -0700 Subject: pinctrl: single: Fix missing flush of posted write for a wakeirq With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index cf9bafa..bfdf720 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1580,6 +1580,9 @@ static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc, else mask &= ~soc_mask; pcs->write(mask, pcswi->reg); + + /* flush posted write */ + mask = pcs->read(pcswi->reg); raw_spin_unlock(&pcs->lock); } -- cgit v0.10.2 From 9ee8ff4867d07a6429991a0b748fa9c1586a7764 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 6 Jun 2016 18:56:27 +0200 Subject: gpio: tegra: Make lockdep class file-scoped Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index ec891a27..661b0e3 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -98,7 +98,6 @@ struct tegra_gpio_info { const struct tegra_gpio_soc_config *soc; struct gpio_chip gc; struct irq_chip ic; - struct lock_class_key lock_class; u32 bank_count; }; @@ -547,6 +546,12 @@ static const struct dev_pm_ops tegra_gpio_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume) }; +/* + * This lock class tells lockdep that GPIO irqs are in a different category + * than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + static int tegra_gpio_probe(struct platform_device *pdev) { const struct tegra_gpio_soc_config *config; @@ -660,7 +665,7 @@ static int tegra_gpio_probe(struct platform_device *pdev) bank = &tgi->bank_info[GPIO_BANK(gpio)]; - irq_set_lockdep_class(irq, &tgi->lock_class); + irq_set_lockdep_class(irq, &gpio_lock_class); irq_set_chip_data(irq, bank); irq_set_chip_and_handler(irq, &tgi->ic, handle_simple_irq); } -- cgit v0.10.2 From 19b5a91764fddcc51b2f8e54a81d4ef231980181 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 Jun 2016 14:35:56 +0800 Subject: pinctrl: tegra: Fix build dependency I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin Acked-by: Jon Hunter Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e4bc115..42a5c1d 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ -obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ +obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index a927379..d9ea2be 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,4 +1,4 @@ -obj-y += pinctrl-tegra.o +obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o -- cgit v0.10.2 From 942f64c4c2be19a1b4a0c4295182b42d153899bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 20 Jun 2016 11:53:20 +0300 Subject: team: Fix possible deadlock during team enslave Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 2ace126..fdee772 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1203,8 +1203,10 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_dev_open; } + netif_addr_lock_bh(dev); dev_uc_sync_multiple(port_dev, dev); dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); err = vlan_vids_add_by_dev(port_dev, dev); if (err) { -- cgit v0.10.2 From d19af0a76444fde629667ecb823c0ee28f9f67d8 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 20 Jun 2016 11:36:28 +0200 Subject: kcm: fix /proc memory leak Every open of /proc/net/kcm leaks 16 bytes of memory as is reported by kmemleak: unreferenced object 0xffff88059c0e3458 (size 192): comm "cat", pid 1401, jiffies 4294935742 (age 310.720s) hex dump (first 32 bytes): 28 45 71 96 05 88 ff ff 00 10 00 00 00 00 00 00 (Eq............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmem_cache_alloc_trace+0x16e/0x230 [] seq_open+0x79/0x1d0 [] kcm_seq_open+0x0/0x30 [kcm] [] seq_open+0x79/0x1d0 [] __seq_open_private+0x2f/0xa0 [] seq_open_net+0x38/0xa0 ... It is caused by a missing free in the ->release path. So fix it by providing seq_release_net as the ->release method. Signed-off-by: Jiri Slaby Fixes: cd6e111bf5 (kcm: Add statistics and proc interfaces) Cc: "David S. Miller" Cc: Tom Herbert Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/net/kcm/kcmproc.c b/net/kcm/kcmproc.c index 7380087..fda7f47 100644 --- a/net/kcm/kcmproc.c +++ b/net/kcm/kcmproc.c @@ -241,6 +241,7 @@ static const struct file_operations kcm_seq_fops = { .open = kcm_seq_open, .read = seq_read, .llseek = seq_lseek, + .release = seq_release_net, }; static struct kcm_seq_muxinfo kcm_seq_muxinfo = { -- cgit v0.10.2 From 27777daa8b6df0c19aaf591d1536a586b3eb5e36 Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Mon, 20 Jun 2016 09:20:46 -0400 Subject: tipc: unclone unbundled buffers before forwarding When extracting an individual message from a received "bundle" buffer, we just create a clone of the base buffer, and adjust it to point into the right position of the linearized data area of the latter. This works well for regular message reception, but during periods of extremely high load it may happen that an extracted buffer, e.g, a connection probe, is reversed and forwarded through an external interface while the preceding extracted message is still unhandled. When this happens, the header or data area of the preceding message will be partially overwritten by a MAC header, leading to unpredicatable consequences, such as a link reset. We now fix this by ensuring that the msg_reverse() function never returns a cloned buffer, and that the returned buffer always contains sufficient valid head and tail room to be forwarded. Reported-by: Erik Hugne Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 8740930..17201aa 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -41,6 +41,8 @@ #include "name_table.h" #define MAX_FORWARD_SIZE 1024 +#define BUF_HEADROOM (LL_MAX_HEADER + 48) +#define BUF_TAILROOM 16 static unsigned int align(unsigned int i) { @@ -505,6 +507,10 @@ bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err) msg_set_hdr_sz(hdr, BASIC_H_SIZE); } + if (skb_cloned(_skb) && + pskb_expand_head(_skb, BUF_HEADROOM, BUF_TAILROOM, GFP_KERNEL)) + goto exit; + /* Now reverse the concerned fields */ msg_set_errcode(hdr, err); msg_set_origport(hdr, msg_destport(&ohdr)); diff --git a/net/tipc/msg.h b/net/tipc/msg.h index 024da8a..7cf52fb 100644 --- a/net/tipc/msg.h +++ b/net/tipc/msg.h @@ -94,17 +94,6 @@ struct plist; #define TIPC_MEDIA_INFO_OFFSET 5 -/** - * TIPC message buffer code - * - * TIPC message buffer headroom reserves space for the worst-case - * link-level device header (in case the message is sent off-node). - * - * Note: Headroom should be a multiple of 4 to ensure the TIPC header fields - * are word aligned for quicker access - */ -#define BUF_HEADROOM (LL_MAX_HEADER + 48) - struct tipc_skb_cb { void *handle; struct sk_buff *tail; -- cgit v0.10.2 From 93c098af09455ea7bdc6f0f6b08f6ac14fa06cf4 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 21 Jun 2016 14:20:02 +0300 Subject: net/mlx4_en: Fix the return value of a failure in VLAN VID add/kill Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a2c2536..43f505e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -406,14 +406,18 @@ static int mlx4_en_vlan_rx_add_vid(struct net_device *dev, mutex_lock(&mdev->state_lock); if (mdev->device_up && priv->port_up) { err = mlx4_SET_VLAN_FLTR(mdev->dev, priv); - if (err) + if (err) { en_err(priv, "Failed configuring VLAN filter\n"); + goto out; + } } - if (mlx4_register_vlan(mdev->dev, priv->port, vid, &idx)) - en_dbg(HW, priv, "failed adding vlan %d\n", vid); - mutex_unlock(&mdev->state_lock); + err = mlx4_register_vlan(mdev->dev, priv->port, vid, &idx); + if (err) + en_dbg(HW, priv, "Failed adding vlan %d\n", vid); - return 0; +out: + mutex_unlock(&mdev->state_lock); + return err; } static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, @@ -421,7 +425,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; - int err; + int err = 0; en_dbg(HW, priv, "Killing VID:%d\n", vid); @@ -438,7 +442,7 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, } mutex_unlock(&mdev->state_lock); - return 0; + return err; } static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac) -- cgit v0.10.2 From 9d76931180557270796f9631e2c79b9c7bb3c9fb Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 21 Jun 2016 14:20:03 +0300 Subject: net/mlx4_en: Avoid unregister_netdev at shutdown flow This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 43f505e..0c0dfd6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2036,11 +2036,20 @@ err: return -ENOMEM; } +static void mlx4_en_shutdown(struct net_device *dev) +{ + rtnl_lock(); + netif_device_detach(dev); + mlx4_en_close(dev); + rtnl_unlock(); +} void mlx4_en_destroy_netdev(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + bool shutdown = mdev->dev->persist->interface_state & + MLX4_INTERFACE_STATE_SHUTDOWN; en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); @@ -2048,7 +2057,10 @@ void mlx4_en_destroy_netdev(struct net_device *dev) if (priv->registered) { devlink_port_type_clear(mlx4_get_devlink_port(mdev->dev, priv->port)); - unregister_netdev(dev); + if (shutdown) + mlx4_en_shutdown(dev); + else + unregister_netdev(dev); } if (priv->allocated) @@ -2073,7 +2085,8 @@ void mlx4_en_destroy_netdev(struct net_device *dev) kfree(priv->tx_ring); kfree(priv->tx_cq); - free_netdev(dev); + if (!shutdown) + free_netdev(dev); } static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 372ebfa..546fab0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -4135,8 +4135,11 @@ static void mlx4_shutdown(struct pci_dev *pdev) mlx4_info(persist->dev, "mlx4_shutdown was called\n"); mutex_lock(&persist->interface_state_mutex); - if (persist->interface_state & MLX4_INTERFACE_STATE_UP) + if (persist->interface_state & MLX4_INTERFACE_STATE_UP) { + /* Notify mlx4 clients that the kernel is being shut down */ + persist->interface_state |= MLX4_INTERFACE_STATE_SHUTDOWN; mlx4_unload_one(pdev); + } mutex_unlock(&persist->interface_state_mutex); } diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 80dec87..d46a0e7 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -466,6 +466,7 @@ enum { enum { MLX4_INTERFACE_STATE_UP = 1 << 0, MLX4_INTERFACE_STATE_DELETION = 1 << 1, + MLX4_INTERFACE_STATE_SHUTDOWN = 1 << 2, }; #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ -- cgit v0.10.2 From fefb62455f6becc87d2d8f25ba2df961add5d06c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 21 Jun 2016 01:52:36 +0300 Subject: MAINTAINERS: belong Documentation/pinctrl.txt properly I'm pretty sure that Documentation/pinctrl.txt would be better maintained by pinctrl subsystem. Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij diff --git a/MAINTAINERS b/MAINTAINERS index e1b090f..c447bdc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8959,6 +8959,7 @@ L: linux-gpio@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git S: Maintained F: Documentation/devicetree/bindings/pinctrl/ +F: Documentation/pinctrl.txt F: drivers/pinctrl/ F: include/linux/pinctrl/ -- cgit v0.10.2 From bce271f255dae8335dc4d2ee2c4531e09cc67f5a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 12:14:07 +0200 Subject: can: fix handling of unmodifiable configuration options fix With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 910c12e..348dd50 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -798,6 +798,9 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[]) * - control mode with CAN_CTRLMODE_FD set */ + if (!data) + return 0; + if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]); -- cgit v0.10.2 From 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 21 Jun 2016 15:45:47 +0200 Subject: can: fix oops caused by wrong rtnl dellink usage For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu Signed-off-by: Oliver Hartkopp Cc: Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 348dd50..ad535a8 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -1011,6 +1011,11 @@ static int can_newlink(struct net *src_net, struct net_device *dev, return -EOPNOTSUPP; } +static void can_dellink(struct net_device *dev, struct list_head *head) +{ + return; +} + static struct rtnl_link_ops can_link_ops __read_mostly = { .kind = "can", .maxtype = IFLA_CAN_MAX, @@ -1019,6 +1024,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .validate = can_validate, .newlink = can_newlink, .changelink = can_changelink, + .dellink = can_dellink, .get_size = can_get_size, .fill_info = can_fill_info, .get_xstats_size = can_get_xstats_size, -- cgit v0.10.2 From b41aa4f8476545e2b663b1549759a8c3a66f47b0 Mon Sep 17 00:00:00 2001 From: Cristina Ciocan Date: Wed, 22 Jun 2016 14:17:19 +0300 Subject: pinctrl: baytrail: Fix mingled clock pins Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 677a811..7abfd42 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -401,9 +401,9 @@ static const struct byt_simple_func_mux byt_score_sata_mux[] = { static const unsigned int byt_score_plt_clk0_pins[] = { 96 }; static const unsigned int byt_score_plt_clk1_pins[] = { 97 }; static const unsigned int byt_score_plt_clk2_pins[] = { 98 }; -static const unsigned int byt_score_plt_clk4_pins[] = { 99 }; -static const unsigned int byt_score_plt_clk5_pins[] = { 100 }; -static const unsigned int byt_score_plt_clk3_pins[] = { 101 }; +static const unsigned int byt_score_plt_clk3_pins[] = { 99 }; +static const unsigned int byt_score_plt_clk4_pins[] = { 100 }; +static const unsigned int byt_score_plt_clk5_pins[] = { 101 }; static const struct byt_simple_func_mux byt_score_plt_clk_mux[] = { SIMPLE_FUNC("plt_clk", 1), }; -- cgit v0.10.2 From 71873a9b38d1cc6c93e2962149a7bb7272a7cb66 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Thu, 23 Jun 2016 07:57:21 +0200 Subject: can: kvaser_usb: Add support for more Kvaser Leaf v2 devices This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 2ff0df3..8483a40 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -47,6 +47,8 @@ config CAN_KVASER_USB - Kvaser USBcan R - Kvaser Leaf Light v2 - Kvaser Mini PCI Express HS + - Kvaser Mini PCI Express 2xHS + - Kvaser USBcan Light 2xHS - Kvaser USBcan II HS/HS - Kvaser USBcan II HS/LS - Kvaser USBcan Rugged ("USBcan Rev B") diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 022bfa1..6f1f3b6 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -59,11 +59,14 @@ #define USB_CAN_R_PRODUCT_ID 39 #define USB_LEAF_LITE_V2_PRODUCT_ID 288 #define USB_MINI_PCIE_HS_PRODUCT_ID 289 +#define USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID 290 +#define USB_USBCAN_LIGHT_2HS_PRODUCT_ID 291 +#define USB_MINI_PCIE_2HS_PRODUCT_ID 292 static inline bool kvaser_is_leaf(const struct usb_device_id *id) { return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID && - id->idProduct <= USB_MINI_PCIE_HS_PRODUCT_ID; + id->idProduct <= USB_MINI_PCIE_2HS_PRODUCT_ID; } /* Kvaser USBCan-II devices */ @@ -537,6 +540,9 @@ static const struct usb_device_id kvaser_usb_table[] = { .driver_info = KVASER_HAS_TXRX_ERRORS }, { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) }, { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) }, + { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) }, /* USBCANII family IDs */ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), -- cgit v0.10.2 From 055ddaace03580455a7b7dbea8e93d62acee61fc Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 22 Jun 2016 20:29:37 +0200 Subject: crypto: user - re-add size check for CRYPTO_MSG_GETALG Commit 9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG") accidentally removed the minimum size check for CRYPTO_MSG_GETALG netlink messages. This allows userland to send a truncated CRYPTO_MSG_GETALG message as short as a netlink header only making crypto_report() operate on uninitialized memory by accessing data beyond the end of the netlink message. Fix this be re-adding the minimum required size of CRYPTO_MSG_GETALG messages to the crypto_msg_min[] array. Fixes: 9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG") Cc: stable@vger.kernel.org # v4.2 Signed-off-by: Mathias Krause Cc: Steffen Klassert Signed-off-by: Herbert Xu diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c index 43fe85f..7097a33 100644 --- a/crypto/crypto_user.c +++ b/crypto/crypto_user.c @@ -455,6 +455,7 @@ static const int crypto_msg_min[CRYPTO_NR_MSGTYPES] = { [CRYPTO_MSG_NEWALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg), [CRYPTO_MSG_DELALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg), [CRYPTO_MSG_UPDATEALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg), + [CRYPTO_MSG_GETALG - CRYPTO_MSG_BASE] = MSGSIZE(crypto_user_alg), [CRYPTO_MSG_DELRNG - CRYPTO_MSG_BASE] = 0, }; -- cgit v0.10.2 From 6cafaf4764a32597c2195aa5411b87728e1fde8a Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Mon, 20 Jun 2016 21:11:45 +0800 Subject: netfilter: nf_tables: fix memory leak if expr init fails If expr init fails then we need to free it. So when the user add a nft rule as follows: # nft add rule filter input tcp dport 22 flow table ssh \ { ip saddr limit rate 0/second } memory leak will happen. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 2c88187..cf7c745 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1724,9 +1724,11 @@ struct nft_expr *nft_expr_init(const struct nft_ctx *ctx, err = nf_tables_newexpr(ctx, &info, expr); if (err < 0) - goto err2; + goto err3; return expr; +err3: + kfree(expr); err2: module_put(info.ops->type->owner); err1: -- cgit v0.10.2 From 62131e5d735226074cba53095545d76b491e5003 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Wed, 8 Jun 2016 20:20:10 +0800 Subject: netfilter: nft_meta: set skb->nf_trace appropriately When user add a nft rule to set nftrace to zero, for example: # nft add rule ip filter input nftrace set 0 We should set nf_trace to zero also. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index 16c50b0..f4bad9d 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -227,7 +227,7 @@ void nft_meta_set_eval(const struct nft_expr *expr, skb->pkt_type = value; break; case NFT_META_NFTRACE: - skb->nf_trace = 1; + skb->nf_trace = !!value; break; default: WARN_ON(1); -- cgit v0.10.2 From 962fcef33b03395051367181a0549d29d109d9a4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 18 Jun 2016 13:03:36 +0800 Subject: esp: Fix ESN generation under UDP encapsulation Blair Steven noticed that ESN in conjunction with UDP encapsulation is broken because we set the temporary ESP header to the wrong spot. This patch fixes this by first of all using the right spot, i.e., 4 bytes off the real ESP header, and then saving this information so that after encryption we can restore it properly. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Reported-by: Blair Steven Signed-off-by: Herbert Xu Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 4779374..d95631d 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -23,6 +23,11 @@ struct esp_skb_cb { void *tmp; }; +struct esp_output_extra { + __be32 seqhi; + u32 esphoff; +}; + #define ESP_SKB_CB(__skb) ((struct esp_skb_cb *)&((__skb)->cb[0])) static u32 esp4_get_mtu(struct xfrm_state *x, int mtu); @@ -35,11 +40,11 @@ static u32 esp4_get_mtu(struct xfrm_state *x, int mtu); * * TODO: Use spare space in skb for this where possible. */ -static void *esp_alloc_tmp(struct crypto_aead *aead, int nfrags, int seqhilen) +static void *esp_alloc_tmp(struct crypto_aead *aead, int nfrags, int extralen) { unsigned int len; - len = seqhilen; + len = extralen; len += crypto_aead_ivsize(aead); @@ -57,15 +62,16 @@ static void *esp_alloc_tmp(struct crypto_aead *aead, int nfrags, int seqhilen) return kmalloc(len, GFP_ATOMIC); } -static inline __be32 *esp_tmp_seqhi(void *tmp) +static inline void *esp_tmp_extra(void *tmp) { - return PTR_ALIGN((__be32 *)tmp, __alignof__(__be32)); + return PTR_ALIGN(tmp, __alignof__(struct esp_output_extra)); } -static inline u8 *esp_tmp_iv(struct crypto_aead *aead, void *tmp, int seqhilen) + +static inline u8 *esp_tmp_iv(struct crypto_aead *aead, void *tmp, int extralen) { return crypto_aead_ivsize(aead) ? - PTR_ALIGN((u8 *)tmp + seqhilen, - crypto_aead_alignmask(aead) + 1) : tmp + seqhilen; + PTR_ALIGN((u8 *)tmp + extralen, + crypto_aead_alignmask(aead) + 1) : tmp + extralen; } static inline struct aead_request *esp_tmp_req(struct crypto_aead *aead, u8 *iv) @@ -99,7 +105,7 @@ static void esp_restore_header(struct sk_buff *skb, unsigned int offset) { struct ip_esp_hdr *esph = (void *)(skb->data + offset); void *tmp = ESP_SKB_CB(skb)->tmp; - __be32 *seqhi = esp_tmp_seqhi(tmp); + __be32 *seqhi = esp_tmp_extra(tmp); esph->seq_no = esph->spi; esph->spi = *seqhi; @@ -107,7 +113,11 @@ static void esp_restore_header(struct sk_buff *skb, unsigned int offset) static void esp_output_restore_header(struct sk_buff *skb) { - esp_restore_header(skb, skb_transport_offset(skb) - sizeof(__be32)); + void *tmp = ESP_SKB_CB(skb)->tmp; + struct esp_output_extra *extra = esp_tmp_extra(tmp); + + esp_restore_header(skb, skb_transport_offset(skb) + extra->esphoff - + sizeof(__be32)); } static void esp_output_done_esn(struct crypto_async_request *base, int err) @@ -121,6 +131,7 @@ static void esp_output_done_esn(struct crypto_async_request *base, int err) static int esp_output(struct xfrm_state *x, struct sk_buff *skb) { int err; + struct esp_output_extra *extra; struct ip_esp_hdr *esph; struct crypto_aead *aead; struct aead_request *req; @@ -137,8 +148,7 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb) int tfclen; int nfrags; int assoclen; - int seqhilen; - __be32 *seqhi; + int extralen; __be64 seqno; /* skb is pure payload to encrypt */ @@ -166,21 +176,21 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb) nfrags = err; assoclen = sizeof(*esph); - seqhilen = 0; + extralen = 0; if (x->props.flags & XFRM_STATE_ESN) { - seqhilen += sizeof(__be32); - assoclen += seqhilen; + extralen += sizeof(*extra); + assoclen += sizeof(__be32); } - tmp = esp_alloc_tmp(aead, nfrags, seqhilen); + tmp = esp_alloc_tmp(aead, nfrags, extralen); if (!tmp) { err = -ENOMEM; goto error; } - seqhi = esp_tmp_seqhi(tmp); - iv = esp_tmp_iv(aead, tmp, seqhilen); + extra = esp_tmp_extra(tmp); + iv = esp_tmp_iv(aead, tmp, extralen); req = esp_tmp_req(aead, iv); sg = esp_req_sg(aead, req); @@ -247,8 +257,10 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb) * encryption. */ if ((x->props.flags & XFRM_STATE_ESN)) { - esph = (void *)(skb_transport_header(skb) - sizeof(__be32)); - *seqhi = esph->spi; + extra->esphoff = (unsigned char *)esph - + skb_transport_header(skb); + esph = (struct ip_esp_hdr *)((unsigned char *)esph - 4); + extra->seqhi = esph->spi; esph->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output.hi); aead_request_set_callback(req, 0, esp_output_done_esn, skb); } @@ -445,7 +457,7 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb) goto out; ESP_SKB_CB(skb)->tmp = tmp; - seqhi = esp_tmp_seqhi(tmp); + seqhi = esp_tmp_extra(tmp); iv = esp_tmp_iv(aead, tmp, seqhilen); req = esp_tmp_req(aead, iv); sg = esp_req_sg(aead, req); -- cgit v0.10.2 From 067a7cd06f7bf860f2e3415394b065b9a0983802 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 20 Jun 2016 13:37:18 -0700 Subject: act_ife: only acquire tcf_lock for existing actions Alexey reported that we have GFP_KERNEL allocation when holding the spinlock tcf_lock. Actually we don't have to take that spinlock for all the cases, especially for the new one we just create. To modify the existing actions, we still need this spinlock to make sure the whole update is atomic. For net-next, we can get rid of this spinlock because we already hold the RTNL lock on slow path, and on fast path we can use RCU to protect the metalist. Joint work with Jamal. Reported-by: Alexey Khoroshilov Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/include/net/tc_act/tc_ife.h b/include/net/tc_act/tc_ife.h index dc9a09a..c55facd 100644 --- a/include/net/tc_act/tc_ife.h +++ b/include/net/tc_act/tc_ife.h @@ -36,7 +36,7 @@ struct tcf_meta_ops { int (*encode)(struct sk_buff *, void *, struct tcf_meta_info *); int (*decode)(struct sk_buff *, void *, u16 len); int (*get)(struct sk_buff *skb, struct tcf_meta_info *mi); - int (*alloc)(struct tcf_meta_info *, void *); + int (*alloc)(struct tcf_meta_info *, void *, gfp_t); void (*release)(struct tcf_meta_info *); int (*validate)(void *val, int len); struct module *owner; @@ -48,8 +48,8 @@ int ife_get_meta_u32(struct sk_buff *skb, struct tcf_meta_info *mi); int ife_get_meta_u16(struct sk_buff *skb, struct tcf_meta_info *mi); int ife_tlv_meta_encode(void *skbdata, u16 attrtype, u16 dlen, const void *dval); -int ife_alloc_meta_u32(struct tcf_meta_info *mi, void *metaval); -int ife_alloc_meta_u16(struct tcf_meta_info *mi, void *metaval); +int ife_alloc_meta_u32(struct tcf_meta_info *mi, void *metaval, gfp_t gfp); +int ife_alloc_meta_u16(struct tcf_meta_info *mi, void *metaval, gfp_t gfp); int ife_check_meta_u32(u32 metaval, struct tcf_meta_info *mi); int ife_encode_meta_u32(u32 metaval, void *skbdata, struct tcf_meta_info *mi); int ife_validate_meta_u32(void *val, int len); diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index 658046d..e407659 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -106,9 +106,9 @@ int ife_get_meta_u16(struct sk_buff *skb, struct tcf_meta_info *mi) } EXPORT_SYMBOL_GPL(ife_get_meta_u16); -int ife_alloc_meta_u32(struct tcf_meta_info *mi, void *metaval) +int ife_alloc_meta_u32(struct tcf_meta_info *mi, void *metaval, gfp_t gfp) { - mi->metaval = kmemdup(metaval, sizeof(u32), GFP_KERNEL); + mi->metaval = kmemdup(metaval, sizeof(u32), gfp); if (!mi->metaval) return -ENOMEM; @@ -116,9 +116,9 @@ int ife_alloc_meta_u32(struct tcf_meta_info *mi, void *metaval) } EXPORT_SYMBOL_GPL(ife_alloc_meta_u32); -int ife_alloc_meta_u16(struct tcf_meta_info *mi, void *metaval) +int ife_alloc_meta_u16(struct tcf_meta_info *mi, void *metaval, gfp_t gfp) { - mi->metaval = kmemdup(metaval, sizeof(u16), GFP_KERNEL); + mi->metaval = kmemdup(metaval, sizeof(u16), gfp); if (!mi->metaval) return -ENOMEM; @@ -240,10 +240,10 @@ static int ife_validate_metatype(struct tcf_meta_ops *ops, void *val, int len) } /* called when adding new meta information - * under ife->tcf_lock + * under ife->tcf_lock for existing action */ static int load_metaops_and_vet(struct tcf_ife_info *ife, u32 metaid, - void *val, int len) + void *val, int len, bool exists) { struct tcf_meta_ops *ops = find_ife_oplist(metaid); int ret = 0; @@ -251,11 +251,13 @@ static int load_metaops_and_vet(struct tcf_ife_info *ife, u32 metaid, if (!ops) { ret = -ENOENT; #ifdef CONFIG_MODULES - spin_unlock_bh(&ife->tcf_lock); + if (exists) + spin_unlock_bh(&ife->tcf_lock); rtnl_unlock(); request_module("ifemeta%u", metaid); rtnl_lock(); - spin_lock_bh(&ife->tcf_lock); + if (exists) + spin_lock_bh(&ife->tcf_lock); ops = find_ife_oplist(metaid); #endif } @@ -272,10 +274,10 @@ static int load_metaops_and_vet(struct tcf_ife_info *ife, u32 metaid, } /* called when adding new meta information - * under ife->tcf_lock + * under ife->tcf_lock for existing action */ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, - int len) + int len, bool exists) { struct tcf_meta_info *mi = NULL; struct tcf_meta_ops *ops = find_ife_oplist(metaid); @@ -284,7 +286,7 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, if (!ops) return -ENOENT; - mi = kzalloc(sizeof(*mi), GFP_KERNEL); + mi = kzalloc(sizeof(*mi), exists ? GFP_ATOMIC : GFP_KERNEL); if (!mi) { /*put back what find_ife_oplist took */ module_put(ops->owner); @@ -294,7 +296,7 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, mi->metaid = metaid; mi->ops = ops; if (len > 0) { - ret = ops->alloc(mi, metaval); + ret = ops->alloc(mi, metaval, exists ? GFP_ATOMIC : GFP_KERNEL); if (ret != 0) { kfree(mi); module_put(ops->owner); @@ -307,14 +309,14 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, return ret; } -static int use_all_metadata(struct tcf_ife_info *ife) +static int use_all_metadata(struct tcf_ife_info *ife, bool exists) { struct tcf_meta_ops *o; int rc = 0; int installed = 0; list_for_each_entry(o, &ifeoplist, list) { - rc = add_metainfo(ife, o->metaid, NULL, 0); + rc = add_metainfo(ife, o->metaid, NULL, 0, exists); if (rc == 0) installed += 1; } @@ -385,8 +387,9 @@ static void tcf_ife_cleanup(struct tc_action *a, int bind) spin_unlock_bh(&ife->tcf_lock); } -/* under ife->tcf_lock */ -static int populate_metalist(struct tcf_ife_info *ife, struct nlattr **tb) +/* under ife->tcf_lock for existing action */ +static int populate_metalist(struct tcf_ife_info *ife, struct nlattr **tb, + bool exists) { int len = 0; int rc = 0; @@ -398,11 +401,11 @@ static int populate_metalist(struct tcf_ife_info *ife, struct nlattr **tb) val = nla_data(tb[i]); len = nla_len(tb[i]); - rc = load_metaops_and_vet(ife, i, val, len); + rc = load_metaops_and_vet(ife, i, val, len, exists); if (rc != 0) return rc; - rc = add_metainfo(ife, i, val, len); + rc = add_metainfo(ife, i, val, len, exists); if (rc) return rc; } @@ -474,7 +477,8 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, saddr = nla_data(tb[TCA_IFE_SMAC]); } - spin_lock_bh(&ife->tcf_lock); + if (exists) + spin_lock_bh(&ife->tcf_lock); ife->tcf_action = parm->action; if (parm->flags & IFE_ENCODE) { @@ -504,11 +508,12 @@ metadata_parse_err: if (ret == ACT_P_CREATED) _tcf_ife_cleanup(a, bind); - spin_unlock_bh(&ife->tcf_lock); + if (exists) + spin_unlock_bh(&ife->tcf_lock); return err; } - err = populate_metalist(ife, tb2); + err = populate_metalist(ife, tb2, exists); if (err) goto metadata_parse_err; @@ -518,17 +523,19 @@ metadata_parse_err: * as we can. You better have at least one else we are * going to bail out */ - err = use_all_metadata(ife); + err = use_all_metadata(ife, exists); if (err) { if (ret == ACT_P_CREATED) _tcf_ife_cleanup(a, bind); - spin_unlock_bh(&ife->tcf_lock); + if (exists) + spin_unlock_bh(&ife->tcf_lock); return err; } } - spin_unlock_bh(&ife->tcf_lock); + if (exists) + spin_unlock_bh(&ife->tcf_lock); if (ret == ACT_P_CREATED) tcf_hash_insert(tn, a); -- cgit v0.10.2 From 817e9f2c5c262b2716f5d77020d118ad53315f3e Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 20 Jun 2016 13:37:19 -0700 Subject: act_ife: acquire ife_mod_lock before reading ifeoplist Cc: Jamal Hadi Salim Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index e407659..ea4a2fe 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -277,7 +277,7 @@ static int load_metaops_and_vet(struct tcf_ife_info *ife, u32 metaid, * under ife->tcf_lock for existing action */ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, - int len, bool exists) + int len, bool atomic) { struct tcf_meta_info *mi = NULL; struct tcf_meta_ops *ops = find_ife_oplist(metaid); @@ -286,7 +286,7 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, if (!ops) return -ENOENT; - mi = kzalloc(sizeof(*mi), exists ? GFP_ATOMIC : GFP_KERNEL); + mi = kzalloc(sizeof(*mi), atomic ? GFP_ATOMIC : GFP_KERNEL); if (!mi) { /*put back what find_ife_oplist took */ module_put(ops->owner); @@ -296,7 +296,7 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, mi->metaid = metaid; mi->ops = ops; if (len > 0) { - ret = ops->alloc(mi, metaval, exists ? GFP_ATOMIC : GFP_KERNEL); + ret = ops->alloc(mi, metaval, atomic ? GFP_ATOMIC : GFP_KERNEL); if (ret != 0) { kfree(mi); module_put(ops->owner); @@ -309,17 +309,19 @@ static int add_metainfo(struct tcf_ife_info *ife, u32 metaid, void *metaval, return ret; } -static int use_all_metadata(struct tcf_ife_info *ife, bool exists) +static int use_all_metadata(struct tcf_ife_info *ife) { struct tcf_meta_ops *o; int rc = 0; int installed = 0; + read_lock(&ife_mod_lock); list_for_each_entry(o, &ifeoplist, list) { - rc = add_metainfo(ife, o->metaid, NULL, 0, exists); + rc = add_metainfo(ife, o->metaid, NULL, 0, true); if (rc == 0) installed += 1; } + read_unlock(&ife_mod_lock); if (installed) return 0; @@ -523,7 +525,7 @@ metadata_parse_err: * as we can. You better have at least one else we are * going to bail out */ - err = use_all_metadata(ife, exists); + err = use_all_metadata(ife); if (err) { if (ret == ACT_P_CREATED) _tcf_ife_cleanup(a, bind); -- cgit v0.10.2 From 33cdcee04be3b4482be97393167e7561b2584e1e Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 22 Jun 2016 09:25:14 +0200 Subject: pwm: Fix pwm_apply_args() Commit 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates"), implemented pwm_disable() as a wrapper around pwm_apply_state(), and then, commit ef2bf4997f7d ("pwm: Improve args checking in pwm_apply_state()") added missing checks on the ->period value in pwm_apply_state() to ensure we were not passing inappropriate values to the ->config() or ->apply() methods. The conjunction of these 2 commits led to a case where pwm_disable() was no longer succeeding, thus preventing the polarity setting done in pwm_apply_args(). Set a valid period in pwm_apply_args() to ensure polarity setting won't be rejected. Signed-off-by: Boris Brezillon Reported-by: Geert Uytterhoeven Suggested-by: Brian Norris Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Tested-by: Geert Uytterhoeven Reviewed-by: Brian Norris Signed-off-by: Thierry Reding diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 908b67c..c038ae3 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -464,6 +464,8 @@ static inline bool pwm_can_sleep(struct pwm_device *pwm) static inline void pwm_apply_args(struct pwm_device *pwm) { + struct pwm_state state = { }; + /* * PWM users calling pwm_apply_args() expect to have a fresh config * where the polarity and period are set according to pwm_args info. @@ -476,18 +478,20 @@ static inline void pwm_apply_args(struct pwm_device *pwm) * at startup (even if they are actually enabled), thus authorizing * polarity setting. * - * Instead of setting ->enabled to false, we call pwm_disable() - * before pwm_set_polarity() to ensure that everything is configured - * as expected, and the PWM is really disabled when the user request - * it. + * To fulfill this requirement, we apply a new state which disables + * the PWM device and set the reference period and polarity config. * * Note that PWM users requiring a smooth handover between the * bootloader and the kernel (like critical regulators controlled by * PWM devices) will have to switch to the atomic API and avoid calling * pwm_apply_args(). */ - pwm_disable(pwm); - pwm_set_polarity(pwm, pwm->args.polarity); + + state.enabled = false; + state.polarity = pwm->args.polarity; + state.period = pwm->args.period; + + pwm_apply_state(pwm, &state); } struct pwm_lookup { -- cgit v0.10.2 From c7f1429389ec1aa25e042bb13451385fbb596f8c Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Thu, 23 Jun 2016 10:24:42 -0700 Subject: Input: xpad - fix oops when attaching an unknown Xbox One gamepad Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 923c572..3438e98 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1437,16 +1437,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if (xpad_device[i].xtype == XTYPE_XBOXONE && - intf->cur_altsetting->desc.bInterfaceNumber != 0) { - /* - * The Xbox One controller lists three interfaces all with the - * same interface class, subclass and protocol. Differentiate by - * interface number. - */ - return -ENODEV; - } - xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); if (!xpad) return -ENOMEM; @@ -1478,6 +1468,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { if (intf->cur_altsetting->desc.bInterfaceProtocol == 129) xpad->xtype = XTYPE_XBOX360W; + else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208) + xpad->xtype = XTYPE_XBOXONE; else xpad->xtype = XTYPE_XBOX360; } else { @@ -1492,6 +1484,17 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping |= MAP_STICKS_TO_NULL; } + if (xpad->xtype == XTYPE_XBOXONE && + intf->cur_altsetting->desc.bInterfaceNumber != 0) { + /* + * The Xbox One controller lists three interfaces all with the + * same interface class, subclass and protocol. Differentiate by + * interface number. + */ + error = -ENODEV; + goto err_free_in_urb; + } + error = xpad_init_output(intf, xpad); if (error) goto err_free_in_urb; -- cgit v0.10.2 From 02bae045f3b3bc5681f075be0a8b1313147d1df2 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 10:58:26 +0800 Subject: drm/amd/powerplay: add some definition for FFC feature on polaris. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h index d41d37a..b8f4b73 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h @@ -392,6 +392,8 @@ typedef uint16_t PPSMC_Result; #define PPSMC_MSG_SetGpuPllDfsForSclk ((uint16_t) 0x300) #define PPSMC_MSG_Didt_Block_Function ((uint16_t) 0x301) +#define PPSMC_MSG_SetVBITimeout ((uint16_t) 0x306) + #define PPSMC_MSG_SecureSRBMWrite ((uint16_t) 0x600) #define PPSMC_MSG_SecureSRBMRead ((uint16_t) 0x601) #define PPSMC_MSG_SetAddress ((uint16_t) 0x800) diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h index b85ff54..899d6d8 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h +++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h @@ -270,7 +270,8 @@ struct SMU74_Discrete_DpmTable { uint8_t BootPhases; uint8_t VRHotLevel; - uint8_t Reserved1[3]; + uint8_t LdoRefSel; + uint8_t Reserved1[2]; uint16_t FanStartTemperature; uint16_t FanStopTemperature; uint16_t MaxVoltage; -- cgit v0.10.2 From 83a7af6dcfd2d84066c6d19bf2bd837f7be4a5ca Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 23 Jun 2016 11:05:00 +0800 Subject: drm/amd/powerplay: disable FFC. SMC need use VBI signal for MCLK switching Send 2 x frame time as vbi timeout Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 64ee78f..20ccbc7 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1805,6 +1805,7 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } + data->smc_state_table.LdoRefSel = (table_info->cac_dtp_table->ucCKS_LDO_REFSEL != 0) ? table_info->cac_dtp_table->ucCKS_LDO_REFSEL : 6; /* Populate CKS Lookup Table */ if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5) stretch_amount2 = 0; @@ -2487,6 +2488,8 @@ int polaris10_enable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable VR hot GPIO interrupt!", result = tmp_result); + smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay); + tmp_result = polaris10_enable_sclk_control(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable SCLK control!", result = tmp_result); @@ -4359,6 +4362,15 @@ static int polaris10_notify_link_speed_change_after_state_change( return 0; } +static int polaris10_notify_smc_display(struct pp_hwmgr *hwmgr) +{ + struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + (PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2); + return (smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay) == 0) ? 0 : -EINVAL; +} + static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input) { int tmp_result, result = 0; @@ -4407,6 +4419,11 @@ static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *i "Failed to program memory timing parameters!", result = tmp_result); + tmp_result = polaris10_notify_smc_display(hwmgr); + PP_ASSERT_WITH_CODE((0 == tmp_result), + "Failed to notify smc display settings!", + result = tmp_result); + tmp_result = polaris10_unfreeze_sclk_mclk_dpm(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to unfreeze SCLK MCLK DPM!", @@ -4441,6 +4458,7 @@ static int polaris10_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_ PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm); } + int polaris10_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display) { PPSMC_Msg msg = has_display ? (PPSMC_Msg)PPSMC_HasDisplay : (PPSMC_Msg)PPSMC_NoDisplay; @@ -4460,8 +4478,6 @@ int polaris10_notify_smc_display_config_after_ps_adjustment(struct pp_hwmgr *hwm if (num_active_displays > 1) /* to do && (pHwMgr->pPECI->displayConfiguration.bMultiMonitorInSync != TRUE)) */ polaris10_notify_smc_display_change(hwmgr, false); - else - polaris10_notify_smc_display_change(hwmgr, true); return 0; } @@ -4502,6 +4518,8 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) frame_time_in_us = 1000000 / refresh_rate; pre_vbi_time_in_us = frame_time_in_us - 200 - mode_info.vblank_time_us; + data->frame_time_x2 = frame_time_in_us * 2 / 100; + display_gap2 = pre_vbi_time_in_us * (ref_clock / 100); cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2); @@ -4510,8 +4528,6 @@ int polaris10_program_display_gap(struct pp_hwmgr *hwmgr) cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, data->soft_regs_start + offsetof(SMU74_SoftRegisters, VBlankTimeout), (frame_time_in_us - pre_vbi_time_in_us)); - polaris10_notify_smc_display_change(hwmgr, num_active_displays != 0); - return 0; } @@ -4623,7 +4639,7 @@ int polaris10_upload_mc_firmware(struct pp_hwmgr *hwmgr) return 0; } - data->need_long_memory_training = true; + data->need_long_memory_training = false; /* * PPMCME_FirmwareDescriptorEntry *pfd = NULL; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h index d717789..afc3434 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h @@ -315,6 +315,7 @@ struct polaris10_hwmgr { uint32_t avfs_vdroop_override_setting; bool apply_avfs_cks_off_voltage; + uint32_t frame_time_x2; }; /* To convert to Q8.8 format for firmware */ diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h index 28f5714..77e8e33 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h @@ -411,6 +411,8 @@ struct phm_cac_tdp_table { uint8_t ucVr_I2C_Line; uint8_t ucPlx_I2C_address; uint8_t ucPlx_I2C_Line; + uint32_t usBoostPowerLimit; + uint8_t ucCKS_LDO_REFSEL; }; struct phm_ppm_table { -- cgit v0.10.2 From 0812a945fbb814e7946fbe6ddcc81d054c8b6c91 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 22 Jun 2016 21:00:09 +0800 Subject: drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation CKS on/off voltage offset calculation algorithm takes in a few coefficients. We need to update them for polaris to latest coefficients to align with BB. Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 20ccbc7..d23dcce 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -98,6 +98,7 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) +#define CEILING_UCHAR(double) ((double-(uint8_t)(double)) > 0 ? (uint8_t)(double+1) : (uint8_t)(double)) static const uint16_t polaris10_clock_stretcher_lookup_table[2][4] = { {600, 1050, 3, 0}, {600, 1050, 6, 1} }; @@ -1787,20 +1788,27 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) ro = efuse * (max -min)/255 + min; - /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ + /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset + * there is a little difference in calculating + * volt_with_cks with windows */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; - - volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \ - (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100); - - volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \ - (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10); + if (hwmgr->chip_id == CHIP_POLARIS10) { + volt_without_cks = (uint32_t)((2753594000 + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \ + (2424180 - (sclk_table->entries[i].clk/100) * 1132925/1000)); + volt_with_cks = (uint32_t)((279720200 + sclk_table->entries[i].clk * 3232 - (ro - 65) * 100000000) / \ + (252248000 - sclk_table->entries[i].clk/100 * 115764)); + } else { + volt_without_cks = (uint32_t)((2416794800 + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \ + (2625416 - (sclk_table->entries[i].clk/100) * 12586807/10000)); + volt_with_cks = (uint32_t)((2999656000 + sclk_table->entries[i].clk * 392803/100 - (ro - 44) * 1000000) / \ + (3422454 - sclk_table->entries[i].clk/100 * 18886376/10000)); + } if (volt_without_cks >= volt_with_cks) - volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + - sclk_table->entries[i].cks_voffset) * 100 / 625) + 1); + volt_offset = (uint8_t)CEILING_UCHAR((volt_without_cks - volt_with_cks + + sclk_table->entries[i].cks_voffset) * 100 / 625); data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } -- cgit v0.10.2 From 12afb34400eb2b301f06b2aa3535497d14faee59 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:54:17 -0700 Subject: Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index bab3c6a..b1b4127 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -27,7 +27,7 @@ MODULE_AUTHOR("Jaya Kumar "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -#define W8001_MAX_LENGTH 11 +#define W8001_MAX_LENGTH 13 #define W8001_LEAD_MASK 0x80 #define W8001_LEAD_BYTE 0x80 #define W8001_TAB_MASK 0x40 -- cgit v0.10.2 From 21de12ee5568fd1aec47890c72967abf791ac80a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Jun 2016 15:00:43 -0700 Subject: netem: fix a use after free If the packet was dropped by lower qdisc, then we must not access it later. Save qdisc_pkt_len(skb) in a temp variable. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet Cc: WANG Cong Cc: Jamal Hadi Salim Cc: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 205bed0..178f163 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -650,14 +650,14 @@ deliver: #endif if (q->qdisc) { + unsigned int pkt_len = qdisc_pkt_len(skb); int err = qdisc_enqueue(skb, q->qdisc); - if (unlikely(err != NET_XMIT_SUCCESS)) { - if (net_xmit_drop_count(err)) { - qdisc_qstats_drop(sch); - qdisc_tree_reduce_backlog(sch, 1, - qdisc_pkt_len(skb)); - } + if (err != NET_XMIT_SUCCESS && + net_xmit_drop_count(err)) { + qdisc_qstats_drop(sch); + qdisc_tree_reduce_backlog(sch, 1, + pkt_len); } goto tfifo_dequeue; } -- cgit v0.10.2 From 52fe705b493d40b472b9e7220a71bdca8537c6b2 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 21 Jun 2016 15:39:43 +1200 Subject: net: vrf: replace hard tab with space in assignment The assignment of rth->dst.output in vrf_rt6_create() and vrf_rtable_create() used a hard tab before the '='. The neighboring assignments did not. Make the assignment of rth->dst.output consistent with the surrounding code. Signed-off-by: Chris Packham Acked-by: David Ahern Signed-off-by: David S. Miller diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index dff0884..8bd8c7e 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -304,7 +304,7 @@ static int vrf_rt6_create(struct net_device *dev) dst_hold(&rt6->dst); rt6->rt6i_table = rt6i_table; - rt6->dst.output = vrf_output6; + rt6->dst.output = vrf_output6; rcu_assign_pointer(vrf->rt6, rt6); rc = 0; @@ -403,7 +403,7 @@ static int vrf_rtable_create(struct net_device *dev) if (!rth) return -ENOMEM; - rth->dst.output = vrf_output; + rth->dst.output = vrf_output; rth->rt_table_id = vrf->tb_id; rcu_assign_pointer(vrf->rth, rth); -- cgit v0.10.2 From efeb2267bba8aa893afdadfc9bae4790777c600c Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Tue, 21 Jun 2016 16:26:49 +0800 Subject: geneve: fix tx_errors statistics Tx errors present summation of errors encountered while transmitting packets. Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 305a04e..cc39cef 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -958,8 +958,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } @@ -1048,8 +1048,8 @@ tx_error: dev->stats.collisions++; else if (err == -ENETUNREACH) dev->stats.tx_carrier_errors++; - else - dev->stats.tx_errors++; + + dev->stats.tx_errors++; return NETDEV_TX_OK; } #endif -- cgit v0.10.2 From c40e4096bf0a12a76c349cbc4d1b2aa40a3d68cd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 21 Jun 2016 16:36:06 +0300 Subject: MAINTAINERS: Update Mellanox's mlx4 Eth NIC driver entry Tariq Toukan is replacing Eugenia (Jenny) Emantayev as the mlx4 Ethernet driver maintainer, thanks to Jenny and good luck to him. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 2ebe195..8cffceb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7406,7 +7406,7 @@ F: drivers/scsi/megaraid.* F: drivers/scsi/megaraid/ MELLANOX ETHERNET DRIVER (mlx4_en) -M: Eugenia Emantayev +M: Tariq Toukan L: netdev@vger.kernel.org S: Supported W: http://www.mellanox.com -- cgit v0.10.2 From 9e72ac7492149a229ce9039c680849cb682d7092 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 Jun 2016 10:55:11 -0700 Subject: Input: wacom_w8001 - ignore invalid pen data packets ThinkPad X60 Tablet PC (pen only device) sometime posts packets that are larger than W8001_PKTLEN_TPCPEN. Reported-by: Chris J Arges Tested-by: Chris J Arges Signed-off-by: Ping Cheng Reviewed-by: Peter Hutterer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index b1b4127..0c9191c 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -339,6 +339,15 @@ static irqreturn_t w8001_interrupt(struct serio *serio, w8001->idx = 0; parse_multi_touch(w8001); break; + + default: + /* + * ThinkPad X60 Tablet PC (pen only device) sometimes + * sends invalid data packets that are larger than + * W8001_PKTLEN_TPCPEN. Let's start over again. + */ + if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1) + w8001->idx = 0; } return IRQ_HANDLED; -- cgit v0.10.2 From 226ba707744a51acb4244724e09caacb1d96aed9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 21 Jun 2016 16:09:00 -0700 Subject: Input: elantech - add more IC body types to the list The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard Tested-by: Patrick Lessard Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 78f93cf..be5b399 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1568,13 +1568,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 5: etd->hw_version = 3; break; - case 6: - case 7: - case 8: - case 9: - case 10: - case 13: - case 14: + case 6 ... 14: etd->hw_version = 4; break; default: -- cgit v0.10.2 From 82d6489d0fed2ec8a8c48c19e8d8a04ac8e5bb26 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Wed, 22 Jun 2016 17:28:41 -0300 Subject: cgroup: Disable IRQs while holding css_set_lock While testing the deadline scheduler + cgroup setup I hit this warning. [ 132.612935] ------------[ cut here ]------------ [ 132.612951] WARNING: CPU: 5 PID: 0 at kernel/softirq.c:150 __local_bh_enable_ip+0x6b/0x80 [ 132.612952] Modules linked in: (a ton of modules...) [ 132.612981] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc2 #2 [ 132.612981] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 132.612982] 0000000000000086 45c8bb5effdd088b ffff88013fd43da0 ffffffff813d229e [ 132.612984] 0000000000000000 0000000000000000 ffff88013fd43de0 ffffffff810a652b [ 132.612985] 00000096811387b5 0000000000000200 ffff8800bab29d80 ffff880034c54c00 [ 132.612986] Call Trace: [ 132.612987] [] dump_stack+0x63/0x85 [ 132.612994] [] __warn+0xcb/0xf0 [ 132.612997] [] ? push_dl_task.part.32+0x170/0x170 [ 132.612999] [] warn_slowpath_null+0x1d/0x20 [ 132.613000] [] __local_bh_enable_ip+0x6b/0x80 [ 132.613008] [] _raw_write_unlock_bh+0x1a/0x20 [ 132.613010] [] _raw_spin_unlock_bh+0xe/0x10 [ 132.613015] [] put_css_set+0x5c/0x60 [ 132.613016] [] cgroup_free+0x7f/0xa0 [ 132.613017] [] __put_task_struct+0x42/0x140 [ 132.613018] [] dl_task_timer+0xca/0x250 [ 132.613027] [] ? push_dl_task.part.32+0x170/0x170 [ 132.613030] [] __hrtimer_run_queues+0xee/0x270 [ 132.613031] [] hrtimer_interrupt+0xa8/0x190 [ 132.613034] [] local_apic_timer_interrupt+0x38/0x60 [ 132.613035] [] smp_apic_timer_interrupt+0x3d/0x50 [ 132.613037] [] apic_timer_interrupt+0x8c/0xa0 [ 132.613038] [] ? native_safe_halt+0x6/0x10 [ 132.613043] [] default_idle+0x1e/0xd0 [ 132.613044] [] arch_cpu_idle+0xf/0x20 [ 132.613046] [] default_idle_call+0x2a/0x40 [ 132.613047] [] cpu_startup_entry+0x2e7/0x340 [ 132.613048] [] start_secondary+0x155/0x190 [ 132.613049] ---[ end trace f91934d162ce9977 ]--- The warn is the spin_(lock|unlock)_bh(&css_set_lock) in the interrupt context. Converting the spin_lock_bh to spin_lock_irq(save) to avoid this problem - and other problems of sharing a spinlock with an interrupt. Cc: Tejun Heo Cc: Li Zefan Cc: Johannes Weiner Cc: Juri Lelli Cc: Steven Rostedt Cc: cgroups@vger.kernel.org Cc: stable@vger.kernel.org # 4.5+ Cc: linux-kernel@vger.kernel.org Reviewed-by: Rik van Riel Reviewed-by: "Luis Claudio R. Goncalves" Signed-off-by: Daniel Bristot de Oliveira Acked-by: Zefan Li Signed-off-by: Tejun Heo diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 688eb0c..75c0ff0 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -837,6 +837,8 @@ static void put_css_set_locked(struct css_set *cset) static void put_css_set(struct css_set *cset) { + unsigned long flags; + /* * Ensure that the refcount doesn't hit zero while any readers * can see it. Similar to atomic_dec_and_lock(), but for an @@ -845,9 +847,9 @@ static void put_css_set(struct css_set *cset) if (atomic_add_unless(&cset->refcount, -1, 1)) return; - spin_lock_bh(&css_set_lock); + spin_lock_irqsave(&css_set_lock, flags); put_css_set_locked(cset); - spin_unlock_bh(&css_set_lock); + spin_unlock_irqrestore(&css_set_lock, flags); } /* @@ -1070,11 +1072,11 @@ static struct css_set *find_css_set(struct css_set *old_cset, /* First see if we already have a cgroup group that matches * the desired set */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cset = find_existing_css_set(old_cset, cgrp, template); if (cset) get_css_set(cset); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); if (cset) return cset; @@ -1102,7 +1104,7 @@ static struct css_set *find_css_set(struct css_set *old_cset, * find_existing_css_set() */ memcpy(cset->subsys, template, sizeof(cset->subsys)); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); /* Add reference counts and links from the new css_set. */ list_for_each_entry(link, &old_cset->cgrp_links, cgrp_link) { struct cgroup *c = link->cgrp; @@ -1128,7 +1130,7 @@ static struct css_set *find_css_set(struct css_set *old_cset, css_get(css); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return cset; } @@ -1192,7 +1194,7 @@ static void cgroup_destroy_root(struct cgroup_root *root) * Release all the links from cset_links to this hierarchy's * root cgroup */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry_safe(link, tmp_link, &cgrp->cset_links, cset_link) { list_del(&link->cset_link); @@ -1200,7 +1202,7 @@ static void cgroup_destroy_root(struct cgroup_root *root) kfree(link); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); if (!list_empty(&root->root_list)) { list_del(&root->root_list); @@ -1600,11 +1602,11 @@ static int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask) ss->root = dst_root; css->cgroup = dcgrp; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); hash_for_each(css_set_table, i, cset, hlist) list_move_tail(&cset->e_cset_node[ss->id], &dcgrp->e_csets[ss->id]); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); /* default hierarchy doesn't enable controllers by default */ dst_root->subsys_mask |= 1 << ssid; @@ -1640,10 +1642,10 @@ static int cgroup_show_path(struct seq_file *sf, struct kernfs_node *kf_node, if (!buf) return -ENOMEM; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); ns_cgroup = current_cgns_cgroup_from_root(kf_cgroot); len = kernfs_path_from_node(kf_node, ns_cgroup->kn, buf, PATH_MAX); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); if (len >= PATH_MAX) len = -ERANGE; @@ -1897,7 +1899,7 @@ static void cgroup_enable_task_cg_lists(void) { struct task_struct *p, *g; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); if (use_task_css_set_links) goto out_unlock; @@ -1922,8 +1924,12 @@ static void cgroup_enable_task_cg_lists(void) * entry won't be deleted though the process has exited. * Do it while holding siglock so that we don't end up * racing against cgroup_exit(). + * + * Interrupts were already disabled while acquiring + * the css_set_lock, so we do not need to disable it + * again when acquiring the sighand->siglock here. */ - spin_lock_irq(&p->sighand->siglock); + spin_lock(&p->sighand->siglock); if (!(p->flags & PF_EXITING)) { struct css_set *cset = task_css_set(p); @@ -1932,11 +1938,11 @@ static void cgroup_enable_task_cg_lists(void) list_add_tail(&p->cg_list, &cset->tasks); get_css_set(cset); } - spin_unlock_irq(&p->sighand->siglock); + spin_unlock(&p->sighand->siglock); } while_each_thread(g, p); read_unlock(&tasklist_lock); out_unlock: - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } static void init_cgroup_housekeeping(struct cgroup *cgrp) @@ -2043,13 +2049,13 @@ static int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask) * Link the root cgroup in this hierarchy into all the css_set * objects. */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); hash_for_each(css_set_table, i, cset, hlist) { link_css_set(&tmp_links, cset, root_cgrp); if (css_set_populated(cset)) cgroup_update_populated(root_cgrp, true); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); BUG_ON(!list_empty(&root_cgrp->self.children)); BUG_ON(atomic_read(&root->nr_cgrps) != 1); @@ -2256,11 +2262,11 @@ out_mount: struct cgroup *cgrp; mutex_lock(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cgrp = cset_cgroup_from_root(ns->root_cset, root); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); mutex_unlock(&cgroup_mutex); nsdentry = kernfs_node_dentry(cgrp->kn, dentry->d_sb); @@ -2337,11 +2343,11 @@ char *cgroup_path_ns(struct cgroup *cgrp, char *buf, size_t buflen, char *ret; mutex_lock(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); ret = cgroup_path_ns_locked(cgrp, buf, buflen, ns); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); mutex_unlock(&cgroup_mutex); return ret; @@ -2369,7 +2375,7 @@ char *task_cgroup_path(struct task_struct *task, char *buf, size_t buflen) char *path = NULL; mutex_lock(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); root = idr_get_next(&cgroup_hierarchy_idr, &hierarchy_id); @@ -2382,7 +2388,7 @@ char *task_cgroup_path(struct task_struct *task, char *buf, size_t buflen) path = buf; } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); mutex_unlock(&cgroup_mutex); return path; } @@ -2557,7 +2563,7 @@ static int cgroup_taskset_migrate(struct cgroup_taskset *tset, * the new cgroup. There are no failure cases after here, so this * is the commit point. */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(cset, &tset->src_csets, mg_node) { list_for_each_entry_safe(task, tmp_task, &cset->mg_tasks, cg_list) { struct css_set *from_cset = task_css_set(task); @@ -2568,7 +2574,7 @@ static int cgroup_taskset_migrate(struct cgroup_taskset *tset, put_css_set_locked(from_cset); } } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); /* * Migration is committed, all target tasks are now on dst_csets. @@ -2597,13 +2603,13 @@ out_cancel_attach: } } while_each_subsys_mask(); out_release_tset: - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_splice_init(&tset->dst_csets, &tset->src_csets); list_for_each_entry_safe(cset, tmp_cset, &tset->src_csets, mg_node) { list_splice_tail_init(&cset->mg_tasks, &cset->tasks); list_del_init(&cset->mg_node); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return ret; } @@ -2634,7 +2640,7 @@ static void cgroup_migrate_finish(struct list_head *preloaded_csets) lockdep_assert_held(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry_safe(cset, tmp_cset, preloaded_csets, mg_preload_node) { cset->mg_src_cgrp = NULL; cset->mg_dst_cgrp = NULL; @@ -2642,7 +2648,7 @@ static void cgroup_migrate_finish(struct list_head *preloaded_csets) list_del_init(&cset->mg_preload_node); put_css_set_locked(cset); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } /** @@ -2783,7 +2789,7 @@ static int cgroup_migrate(struct task_struct *leader, bool threadgroup, * already PF_EXITING could be freed from underneath us unless we * take an rcu_read_lock. */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); rcu_read_lock(); task = leader; do { @@ -2792,7 +2798,7 @@ static int cgroup_migrate(struct task_struct *leader, bool threadgroup, break; } while_each_thread(leader, task); rcu_read_unlock(); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return cgroup_taskset_migrate(&tset, root); } @@ -2816,7 +2822,7 @@ static int cgroup_attach_task(struct cgroup *dst_cgrp, return -EBUSY; /* look up all src csets */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); rcu_read_lock(); task = leader; do { @@ -2826,7 +2832,7 @@ static int cgroup_attach_task(struct cgroup *dst_cgrp, break; } while_each_thread(leader, task); rcu_read_unlock(); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); /* prepare dst csets and commit */ ret = cgroup_migrate_prepare_dst(&preloaded_csets); @@ -2859,9 +2865,9 @@ static int cgroup_procs_write_permission(struct task_struct *task, struct cgroup *cgrp; struct inode *inode; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cgrp = task_cgroup_from_root(task, &cgrp_dfl_root); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); while (!cgroup_is_descendant(dst_cgrp, cgrp)) cgrp = cgroup_parent(cgrp); @@ -2962,9 +2968,9 @@ int cgroup_attach_task_all(struct task_struct *from, struct task_struct *tsk) if (root == &cgrp_dfl_root) continue; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); from_cgrp = task_cgroup_from_root(from, root); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); retval = cgroup_attach_task(from_cgrp, tsk, false); if (retval) @@ -3080,7 +3086,7 @@ static int cgroup_update_dfl_csses(struct cgroup *cgrp) percpu_down_write(&cgroup_threadgroup_rwsem); /* look up all csses currently attached to @cgrp's subtree */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cgroup_for_each_live_descendant_pre(dsct, d_css, cgrp) { struct cgrp_cset_link *link; @@ -3088,14 +3094,14 @@ static int cgroup_update_dfl_csses(struct cgroup *cgrp) cgroup_migrate_add_src(link->cset, dsct, &preloaded_csets); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); /* NULL dst indicates self on default hierarchy */ ret = cgroup_migrate_prepare_dst(&preloaded_csets); if (ret) goto out_finish; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(src_cset, &preloaded_csets, mg_preload_node) { struct task_struct *task, *ntask; @@ -3107,7 +3113,7 @@ static int cgroup_update_dfl_csses(struct cgroup *cgrp) list_for_each_entry_safe(task, ntask, &src_cset->tasks, cg_list) cgroup_taskset_add(task, &tset); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); ret = cgroup_taskset_migrate(&tset, cgrp->root); out_finish: @@ -3908,10 +3914,10 @@ static int cgroup_task_count(const struct cgroup *cgrp) int count = 0; struct cgrp_cset_link *link; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(link, &cgrp->cset_links, cset_link) count += atomic_read(&link->cset->refcount); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return count; } @@ -4249,7 +4255,7 @@ void css_task_iter_start(struct cgroup_subsys_state *css, memset(it, 0, sizeof(*it)); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); it->ss = css->ss; @@ -4262,7 +4268,7 @@ void css_task_iter_start(struct cgroup_subsys_state *css, css_task_iter_advance_css_set(it); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } /** @@ -4280,7 +4286,7 @@ struct task_struct *css_task_iter_next(struct css_task_iter *it) it->cur_task = NULL; } - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); if (it->task_pos) { it->cur_task = list_entry(it->task_pos, struct task_struct, @@ -4289,7 +4295,7 @@ struct task_struct *css_task_iter_next(struct css_task_iter *it) css_task_iter_advance(it); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return it->cur_task; } @@ -4303,10 +4309,10 @@ struct task_struct *css_task_iter_next(struct css_task_iter *it) void css_task_iter_end(struct css_task_iter *it) { if (it->cur_cset) { - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_del(&it->iters_node); put_css_set_locked(it->cur_cset); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } if (it->cur_task) @@ -4338,10 +4344,10 @@ int cgroup_transfer_tasks(struct cgroup *to, struct cgroup *from) mutex_lock(&cgroup_mutex); /* all tasks in @from are being moved, all csets are source */ - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(link, &from->cset_links, cset_link) cgroup_migrate_add_src(link->cset, to, &preloaded_csets); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); ret = cgroup_migrate_prepare_dst(&preloaded_csets); if (ret) @@ -5449,10 +5455,10 @@ static int cgroup_destroy_locked(struct cgroup *cgrp) */ cgrp->self.flags &= ~CSS_ONLINE; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(link, &cgrp->cset_links, cset_link) link->cset->dead = true; - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); /* initiate massacre of all css's */ for_each_css(css, ssid, cgrp) @@ -5723,7 +5729,7 @@ int proc_cgroup_show(struct seq_file *m, struct pid_namespace *ns, goto out; mutex_lock(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); for_each_root(root) { struct cgroup_subsys *ss; @@ -5776,7 +5782,7 @@ int proc_cgroup_show(struct seq_file *m, struct pid_namespace *ns, retval = 0; out_unlock: - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); mutex_unlock(&cgroup_mutex); kfree(buf); out: @@ -5921,13 +5927,13 @@ void cgroup_post_fork(struct task_struct *child) if (use_task_css_set_links) { struct css_set *cset; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cset = task_css_set(current); if (list_empty(&child->cg_list)) { get_css_set(cset); css_set_move_task(child, NULL, cset, false); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } /* @@ -5972,9 +5978,9 @@ void cgroup_exit(struct task_struct *tsk) cset = task_css_set(tsk); if (!list_empty(&tsk->cg_list)) { - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); css_set_move_task(tsk, cset, NULL, false); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); } else { get_css_set(cset); } @@ -6042,9 +6048,9 @@ static void cgroup_release_agent(struct work_struct *work) if (!pathbuf || !agentbuf) goto out; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); path = cgroup_path_ns_locked(cgrp, pathbuf, PATH_MAX, &init_cgroup_ns); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); if (!path) goto out; @@ -6304,12 +6310,12 @@ struct cgroup_namespace *copy_cgroup_ns(unsigned long flags, return ERR_PTR(-EPERM); mutex_lock(&cgroup_mutex); - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); cset = task_css_set(current); get_css_set(cset); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); mutex_unlock(&cgroup_mutex); new_ns = alloc_cgroup_ns(); @@ -6433,7 +6439,7 @@ static int current_css_set_cg_links_read(struct seq_file *seq, void *v) if (!name_buf) return -ENOMEM; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); rcu_read_lock(); cset = rcu_dereference(current->cgroups); list_for_each_entry(link, &cset->cgrp_links, cgrp_link) { @@ -6444,7 +6450,7 @@ static int current_css_set_cg_links_read(struct seq_file *seq, void *v) c->root->hierarchy_id, name_buf); } rcu_read_unlock(); - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); kfree(name_buf); return 0; } @@ -6455,7 +6461,7 @@ static int cgroup_css_links_read(struct seq_file *seq, void *v) struct cgroup_subsys_state *css = seq_css(seq); struct cgrp_cset_link *link; - spin_lock_bh(&css_set_lock); + spin_lock_irq(&css_set_lock); list_for_each_entry(link, &css->cgroup->cset_links, cset_link) { struct css_set *cset = link->cset; struct task_struct *task; @@ -6478,7 +6484,7 @@ static int cgroup_css_links_read(struct seq_file *seq, void *v) overflow: seq_puts(seq, " ...\n"); } - spin_unlock_bh(&css_set_lock); + spin_unlock_irq(&css_set_lock); return 0; } -- cgit v0.10.2 From 60842ef8128e7bf58c024814cd0dc14319232b6c Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Thu, 23 Jun 2016 17:37:34 -0700 Subject: Input: vmmouse - remove port reservation The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: # 4.1- Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c index a3f0f5a..0f58678 100644 --- a/drivers/input/mouse/vmmouse.c +++ b/drivers/input/mouse/vmmouse.c @@ -355,18 +355,11 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) return -ENXIO; } - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - /* Check if the device is present */ response = ~VMMOUSE_PROTO_MAGIC; VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2); - if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) { - release_region(VMMOUSE_PROTO_PORT, 4); + if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) return -ENXIO; - } if (set_properties) { psmouse->vendor = VMMOUSE_VENDOR; @@ -374,8 +367,6 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties) psmouse->model = version; } - release_region(VMMOUSE_PROTO_PORT, 4); - return 0; } @@ -394,7 +385,6 @@ static void vmmouse_disconnect(struct psmouse *psmouse) psmouse_reset(psmouse); input_unregister_device(priv->abs_dev); kfree(priv); - release_region(VMMOUSE_PROTO_PORT, 4); } /** @@ -438,15 +428,10 @@ int vmmouse_init(struct psmouse *psmouse) struct input_dev *rel_dev = psmouse->dev, *abs_dev; int error; - if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { - psmouse_dbg(psmouse, "VMMouse port in use.\n"); - return -EBUSY; - } - psmouse_reset(psmouse); error = vmmouse_enable(psmouse); if (error) - goto release_region; + return error; priv = kzalloc(sizeof(*priv), GFP_KERNEL); abs_dev = input_allocate_device(); @@ -502,8 +487,5 @@ init_fail: kfree(priv); psmouse->private = NULL; -release_region: - release_region(VMMOUSE_PROTO_PORT, 4); - return error; } -- cgit v0.10.2 From 1ee6667cd8d183b2fed12f97285f184431d2caf9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2016 17:50:39 -0700 Subject: libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: Cc: Micah Parrish Cc: Toshi Kani Signed-off-by: Dan Williams diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index f7718ec..cea8350 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -344,6 +344,8 @@ struct device *nd_pfn_create(struct nd_region *nd_region) int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) { u64 checksum, offset; + unsigned long align; + enum nd_pfn_mode mode; struct nd_namespace_io *nsio; struct nd_pfn_sb *pfn_sb = nd_pfn->pfn_sb; struct nd_namespace_common *ndns = nd_pfn->ndns; @@ -386,22 +388,50 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -ENXIO; } + align = le32_to_cpu(pfn_sb->align); + offset = le64_to_cpu(pfn_sb->dataoff); + if (align == 0) + align = 1UL << ilog2(offset); + mode = le32_to_cpu(pfn_sb->mode); + if (!nd_pfn->uuid) { - /* from probe we allocate */ + /* + * When probing a namepace via nd_pfn_probe() the uuid + * is NULL (see: nd_pfn_devinit()) we init settings from + * pfn_sb + */ nd_pfn->uuid = kmemdup(pfn_sb->uuid, 16, GFP_KERNEL); if (!nd_pfn->uuid) return -ENOMEM; + nd_pfn->align = align; + nd_pfn->mode = mode; } else { - /* from init we validate */ + /* + * When probing a pfn / dax instance we validate the + * live settings against the pfn_sb + */ if (memcmp(nd_pfn->uuid, pfn_sb->uuid, 16) != 0) return -ENODEV; + + /* + * If the uuid validates, but other settings mismatch + * return EINVAL because userspace has managed to change + * the configuration without specifying new + * identification. + */ + if (nd_pfn->align != align || nd_pfn->mode != mode) { + dev_err(&nd_pfn->dev, + "init failed, settings mismatch\n"); + dev_dbg(&nd_pfn->dev, "align: %lx:%lx mode: %d:%d\n", + nd_pfn->align, align, nd_pfn->mode, + mode); + return -EINVAL; + } } - if (nd_pfn->align == 0) - nd_pfn->align = le32_to_cpu(pfn_sb->align); - if (nd_pfn->align > nvdimm_namespace_capacity(ndns)) { + if (align > nvdimm_namespace_capacity(ndns)) { dev_err(&nd_pfn->dev, "alignment: %lx exceeds capacity %llx\n", - nd_pfn->align, nvdimm_namespace_capacity(ndns)); + align, nvdimm_namespace_capacity(ndns)); return -EINVAL; } @@ -411,7 +441,6 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) * namespace has changed since the pfn superblock was * established. */ - offset = le64_to_cpu(pfn_sb->dataoff); nsio = to_nd_namespace_io(&ndns->dev); if (offset >= resource_size(&nsio->res)) { dev_err(&nd_pfn->dev, "pfn array size exceeds capacity of %s\n", @@ -419,10 +448,11 @@ int nd_pfn_validate(struct nd_pfn *nd_pfn, const char *sig) return -EBUSY; } - if ((nd_pfn->align && !IS_ALIGNED(offset, nd_pfn->align)) + if ((align && !IS_ALIGNED(offset, align)) || !IS_ALIGNED(offset, PAGE_SIZE)) { - dev_err(&nd_pfn->dev, "bad offset: %#llx dax disabled\n", - offset); + dev_err(&nd_pfn->dev, + "bad offset: %#llx dax disabled align: %#lx\n", + offset, align); return -ENXIO; } @@ -502,7 +532,6 @@ static struct vmem_altmap *__nvdimm_setup_pfn(struct nd_pfn *nd_pfn, res->start += start_pad; res->end -= end_trunc; - nd_pfn->mode = le32_to_cpu(nd_pfn->pfn_sb->mode); if (nd_pfn->mode == PFN_MODE_RAM) { if (offset < SZ_8K) return ERR_PTR(-EINVAL); -- cgit v0.10.2 From 3d22462ae915743f3be5bf1ab3d4a6b72c2bb6c9 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 24 May 2016 06:27:44 -0400 Subject: cifs: stuff the fl_owner into "pid" field in the lock request Right now, we send the tgid cross the wire. What we really want to send though is a hashed fl_owner_t since samba treats this field as a generic lockowner. It turns out that because we enforce and release locks locally before they are ever sent to the server, this patch makes no difference in behavior. Still, setting OFD locks on the server using the process pid seems wrong, so I think this patch still makes sense. Signed-off-by: Jeff Layton Signed-off-by: Steve French Acked-by: Pavel Shilovsky Acked-by: Sachin Prabhu diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 5d8b7ed..5d841f3 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -87,6 +87,7 @@ extern mempool_t *cifs_req_poolp; extern mempool_t *cifs_mid_poolp; struct workqueue_struct *cifsiod_wq; +__u32 cifs_lock_secret; /* * Bumps refcount for cifs super block. @@ -1266,6 +1267,8 @@ init_cifs(void) spin_lock_init(&cifs_file_list_lock); spin_lock_init(&GlobalMid_Lock); + get_random_bytes(&cifs_lock_secret, sizeof(cifs_lock_secret)); + if (cifs_max_pending < 2) { cifs_max_pending = 2; cifs_dbg(FYI, "cifs_max_pending set to min of 2\n"); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index bba106c..8f1d8c1 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1619,6 +1619,7 @@ void cifs_oplock_break(struct work_struct *work); extern const struct slow_work_ops cifs_oplock_break_ops; extern struct workqueue_struct *cifsiod_wq; +extern __u32 cifs_lock_secret; extern mempool_t *cifs_mid_poolp; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 9793ae0..d4890b6 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1112,6 +1112,12 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile) return rc; } +static __u32 +hash_lockowner(fl_owner_t owner) +{ + return cifs_lock_secret ^ hash32_ptr((const void *)owner); +} + struct lock_to_push { struct list_head llist; __u64 offset; @@ -1178,7 +1184,7 @@ cifs_push_posix_locks(struct cifsFileInfo *cfile) else type = CIFS_WRLCK; lck = list_entry(el, struct lock_to_push, llist); - lck->pid = flock->fl_pid; + lck->pid = hash_lockowner(flock->fl_owner); lck->netfid = cfile->fid.netfid; lck->length = length; lck->type = type; @@ -1305,7 +1311,8 @@ cifs_getlk(struct file *file, struct file_lock *flock, __u32 type, posix_lock_type = CIFS_RDLCK; else posix_lock_type = CIFS_WRLCK; - rc = CIFSSMBPosixLock(xid, tcon, netfid, current->tgid, + rc = CIFSSMBPosixLock(xid, tcon, netfid, + hash_lockowner(flock->fl_owner), flock->fl_start, length, flock, posix_lock_type, wait_flag); return rc; @@ -1505,7 +1512,8 @@ cifs_setlk(struct file *file, struct file_lock *flock, __u32 type, posix_lock_type = CIFS_UNLCK; rc = CIFSSMBPosixLock(xid, tcon, cfile->fid.netfid, - current->tgid, flock->fl_start, length, + hash_lockowner(flock->fl_owner), + flock->fl_start, length, NULL, posix_lock_type, wait_flag); goto out; } -- cgit v0.10.2 From 202d772ba02b1deb8835a631cd8255943d1906a0 Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Thu, 26 May 2016 11:52:24 +0200 Subject: cifs: use CIFS_MAX_DOMAINNAME_LEN when converting the domain name Currently in build_ntlmssp_auth_blob(), when converting the domain name to UTF16, CIFS_MAX_USERNAME_LEN limit is used. It should be CIFS_MAX_DOMAINNAME_LEN. This patch fixes this. Signed-off-by: Jerome Marchand Signed-off-by: Steve French diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index af0ec2d..c3d086e 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -430,7 +430,7 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, } else { int len; len = cifs_strtoUTF16((__le16 *)tmp, ses->domainName, - CIFS_MAX_USERNAME_LEN, nls_cp); + CIFS_MAX_DOMAINNAME_LEN, nls_cp); len *= 2; /* unicode is 2 bytes each */ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer); sec_blob->DomainName.Length = cpu_to_le16(len); -- cgit v0.10.2 From b8da344b74c822e966c6d19d6b2321efe82c5d97 Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Thu, 26 May 2016 11:52:25 +0200 Subject: cifs: dynamic allocation of ntlmssp blob In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated statically and its size is an "empirical" 5*sizeof(struct _AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value comes from or if it was ever appropriate, but it is currently insufficient: the user and domain name in UTF16 could take 1kB by themselves. Because of that, build_ntlmssp_auth_blob() might corrupt memory (out-of-bounds write). The size of ntlmssp_blob in SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE) + 500). This patch allocates the blob dynamically in build_ntlmssp_auth_blob(). Signed-off-by: Jerome Marchand Signed-off-by: Steve French CC: Stable diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h index 848249f..3079b38 100644 --- a/fs/cifs/ntlmssp.h +++ b/fs/cifs/ntlmssp.h @@ -133,6 +133,6 @@ typedef struct _AUTHENTICATE_MESSAGE { int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len, struct cifs_ses *ses); void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, struct cifs_ses *ses); -int build_ntlmssp_auth_blob(unsigned char *pbuffer, u16 *buflen, +int build_ntlmssp_auth_blob(unsigned char **pbuffer, u16 *buflen, struct cifs_ses *ses, const struct nls_table *nls_cp); diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index c3d086e..a42e99c 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -364,19 +364,43 @@ void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, sec_blob->DomainName.MaximumLength = 0; } -/* We do not malloc the blob, it is passed in pbuffer, because its - maximum possible size is fixed and small, making this approach cleaner. - This function returns the length of the data in the blob */ -int build_ntlmssp_auth_blob(unsigned char *pbuffer, +static int size_of_ntlmssp_blob(struct cifs_ses *ses) +{ + int sz = sizeof(AUTHENTICATE_MESSAGE) + ses->auth_key.len + - CIFS_SESS_KEY_SIZE + CIFS_CPHTXT_SIZE + 2; + + if (ses->domainName) + sz += 2 * strnlen(ses->domainName, CIFS_MAX_DOMAINNAME_LEN); + else + sz += 2; + + if (ses->user_name) + sz += 2 * strnlen(ses->user_name, CIFS_MAX_USERNAME_LEN); + else + sz += 2; + + return sz; +} + +int build_ntlmssp_auth_blob(unsigned char **pbuffer, u16 *buflen, struct cifs_ses *ses, const struct nls_table *nls_cp) { int rc; - AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer; + AUTHENTICATE_MESSAGE *sec_blob; __u32 flags; unsigned char *tmp; + rc = setup_ntlmv2_rsp(ses, nls_cp); + if (rc) { + cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc); + *buflen = 0; + goto setup_ntlmv2_ret; + } + *pbuffer = kmalloc(size_of_ntlmssp_blob(ses), GFP_KERNEL); + sec_blob = (AUTHENTICATE_MESSAGE *)*pbuffer; + memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8); sec_blob->MessageType = NtLmAuthenticate; @@ -391,7 +415,7 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, flags |= NTLMSSP_NEGOTIATE_KEY_XCH; } - tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE); + tmp = *pbuffer + sizeof(AUTHENTICATE_MESSAGE); sec_blob->NegotiateFlags = cpu_to_le32(flags); sec_blob->LmChallengeResponse.BufferOffset = @@ -399,13 +423,9 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, sec_blob->LmChallengeResponse.Length = 0; sec_blob->LmChallengeResponse.MaximumLength = 0; - sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->NtChallengeResponse.BufferOffset = + cpu_to_le32(tmp - *pbuffer); if (ses->user_name != NULL) { - rc = setup_ntlmv2_rsp(ses, nls_cp); - if (rc) { - cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc); - goto setup_ntlmv2_ret; - } memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE, ses->auth_key.len - CIFS_SESS_KEY_SIZE); tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE; @@ -423,7 +443,7 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, } if (ses->domainName == NULL) { - sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->DomainName.Length = 0; sec_blob->DomainName.MaximumLength = 0; tmp += 2; @@ -432,14 +452,14 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, len = cifs_strtoUTF16((__le16 *)tmp, ses->domainName, CIFS_MAX_DOMAINNAME_LEN, nls_cp); len *= 2; /* unicode is 2 bytes each */ - sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->DomainName.Length = cpu_to_le16(len); sec_blob->DomainName.MaximumLength = cpu_to_le16(len); tmp += len; } if (ses->user_name == NULL) { - sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->UserName.Length = 0; sec_blob->UserName.MaximumLength = 0; tmp += 2; @@ -448,13 +468,13 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, len = cifs_strtoUTF16((__le16 *)tmp, ses->user_name, CIFS_MAX_USERNAME_LEN, nls_cp); len *= 2; /* unicode is 2 bytes each */ - sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->UserName.Length = cpu_to_le16(len); sec_blob->UserName.MaximumLength = cpu_to_le16(len); tmp += len; } - sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->WorkstationName.Length = 0; sec_blob->WorkstationName.MaximumLength = 0; tmp += 2; @@ -463,19 +483,19 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer, (ses->ntlmssp->server_flags & NTLMSSP_NEGOTIATE_EXTENDED_SEC)) && !calc_seckey(ses)) { memcpy(tmp, ses->ntlmssp->ciphertext, CIFS_CPHTXT_SIZE); - sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->SessionKey.Length = cpu_to_le16(CIFS_CPHTXT_SIZE); sec_blob->SessionKey.MaximumLength = cpu_to_le16(CIFS_CPHTXT_SIZE); tmp += CIFS_CPHTXT_SIZE; } else { - sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer); + sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - *pbuffer); sec_blob->SessionKey.Length = 0; sec_blob->SessionKey.MaximumLength = 0; } + *buflen = tmp - *pbuffer; setup_ntlmv2_ret: - *buflen = tmp - pbuffer; return rc; } @@ -1266,7 +1286,7 @@ sess_auth_rawntlmssp_authenticate(struct sess_data *sess_data) struct cifs_ses *ses = sess_data->ses; __u16 bytes_remaining; char *bcc_ptr; - char *ntlmsspblob = NULL; + unsigned char *ntlmsspblob = NULL; u16 blob_len; cifs_dbg(FYI, "rawntlmssp session setup authenticate phase\n"); @@ -1279,19 +1299,7 @@ sess_auth_rawntlmssp_authenticate(struct sess_data *sess_data) /* Build security blob before we assemble the request */ pSMB = (SESSION_SETUP_ANDX *)sess_data->iov[0].iov_base; smb_buf = (struct smb_hdr *)pSMB; - /* - * 5 is an empirical value, large enough to hold - * authenticate message plus max 10 of av paris, - * domain, user, workstation names, flags, etc. - */ - ntlmsspblob = kzalloc(5*sizeof(struct _AUTHENTICATE_MESSAGE), - GFP_KERNEL); - if (!ntlmsspblob) { - rc = -ENOMEM; - goto out; - } - - rc = build_ntlmssp_auth_blob(ntlmsspblob, + rc = build_ntlmssp_auth_blob(&ntlmsspblob, &blob_len, ses, sess_data->nls_cp); if (rc) goto out_free_ntlmsspblob; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 8f38e33..c3e61a7 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -588,7 +588,7 @@ SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses, u16 blob_length = 0; struct key *spnego_key = NULL; char *security_blob = NULL; - char *ntlmssp_blob = NULL; + unsigned char *ntlmssp_blob = NULL; bool use_spnego = false; /* else use raw ntlmssp */ cifs_dbg(FYI, "Session Setup\n"); @@ -713,13 +713,7 @@ ssetup_ntlmssp_authenticate: iov[1].iov_len = blob_length; } else if (phase == NtLmAuthenticate) { req->hdr.SessionId = ses->Suid; - ntlmssp_blob = kzalloc(sizeof(struct _NEGOTIATE_MESSAGE) + 500, - GFP_KERNEL); - if (ntlmssp_blob == NULL) { - rc = -ENOMEM; - goto ssetup_exit; - } - rc = build_ntlmssp_auth_blob(ntlmssp_blob, &blob_length, ses, + rc = build_ntlmssp_auth_blob(&ntlmssp_blob, &blob_length, ses, nls_cp); if (rc) { cifs_dbg(FYI, "build_ntlmssp_auth_blob failed %d\n", -- cgit v0.10.2 From a6b6befbb2806697461962edb044e3376a771ebb Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 8 Jun 2016 17:02:32 +0100 Subject: cifs: check hash calculating succeeded calc_lanman_hash() could return -ENOMEM or other errors, we should check that everything went fine before using the calculated key. Signed-off-by: Luis de Bethencourt Signed-off-by: Steve French diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index a42e99c..538d9b5 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -710,6 +710,8 @@ sess_auth_lanman(struct sess_data *sess_data) rc = calc_lanman_hash(ses->password, ses->server->cryptkey, ses->server->sec_mode & SECMODE_PW_ENCRYPT ? true : false, lnm_session_key); + if (rc) + goto out; memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE); bcc_ptr += CIFS_AUTH_RESP_SIZE; -- cgit v0.10.2 From bc23676caf54c9b6e2521ef065dfddf6c50211de Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:18 -0400 Subject: NFSv4.1/pnfs: Ensure we handle delegation errors in nfs4_proc_layoutget() nfs4_handle_exception() relies on the caller setting the 'inode' field in the struct nfs4_exception argument when the error applies to a delegation. Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index de97567..27fe63b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -8036,7 +8036,10 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, long *timeout, gfp_t gfp_flags) .flags = RPC_TASK_ASYNC, }; struct pnfs_layout_segment *lseg = NULL; - struct nfs4_exception exception = { .timeout = *timeout }; + struct nfs4_exception exception = { + .inode = inode, + .timeout = *timeout, + }; int status = 0; dprintk("--> %s\n", __func__); -- cgit v0.10.2 From 67a3b721462c9b3bdc36ad6a583f41706402b3ea Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:19 -0400 Subject: NFSv4.1/pnfs: Layout stateids start out as being invalid Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 0c7e0d4..f619139 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1290,6 +1290,7 @@ alloc_init_layout_hdr(struct inode *ino, INIT_LIST_HEAD(&lo->plh_bulk_destroy); lo->plh_inode = ino; lo->plh_lc_cred = get_rpccred(ctx->cred); + lo->plh_flags |= 1 << NFS_LAYOUT_INVALID_STID; return lo; } @@ -1565,8 +1566,7 @@ lookup_again: * stateid, or it has been invalidated, then we must use the open * stateid. */ - if (lo->plh_stateid.seqid == 0 || - test_bit(NFS_LAYOUT_INVALID_STID, &lo->plh_flags)) { + if (test_bit(NFS_LAYOUT_INVALID_STID, &lo->plh_flags)) { /* * The first layoutget for the file. Need to serialize per -- cgit v0.10.2 From e5241e43883058b61a955b4bbd677fe4ffd3ae4e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:20 -0400 Subject: NFSv4.1/pnfs: Add sparse lock annotations for pnfs_find_alloc_layout Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index f619139..ca488b5 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1298,6 +1298,8 @@ static struct pnfs_layout_hdr * pnfs_find_alloc_layout(struct inode *ino, struct nfs_open_context *ctx, gfp_t gfp_flags) + __releases(&ino->i_lock) + __acquires(&ino->i_lock) { struct nfs_inode *nfsi = NFS_I(ino); struct pnfs_layout_hdr *new = NULL; -- cgit v0.10.2 From dd1beb3d16f6a10683b84b89a4644065c43910f3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:21 -0400 Subject: NFS/pnfs: handle bad delegation stateids in nfs4_layoutget_handle_exception We must call nfs4_handle_exception() on BAD_STATEID errors. The only exception is if the stateid argument turns out to be a layout stateid that is declared invalid. Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 27fe63b..406dd3e 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7924,8 +7924,8 @@ nfs4_layoutget_handle_exception(struct rpc_task *task, break; } lo = NFS_I(inode)->layout; - if (lo && nfs4_stateid_match(&lgp->args.stateid, - &lo->plh_stateid)) { + if (lo && !test_bit(NFS_LAYOUT_INVALID_STID, &lo->plh_flags) && + nfs4_stateid_match_other(&lgp->args.stateid, &lo->plh_stateid)) { LIST_HEAD(head); /* @@ -7936,10 +7936,10 @@ nfs4_layoutget_handle_exception(struct rpc_task *task, pnfs_mark_matching_lsegs_invalid(lo, &head, NULL, 0); spin_unlock(&inode->i_lock); pnfs_free_lseg_list(&head); + status = -EAGAIN; + goto out; } else spin_unlock(&inode->i_lock); - status = -EAGAIN; - goto out; } status = nfs4_handle_exception(server, status, exception); -- cgit v0.10.2 From d2a7de0b34cd255f23d4b7a7f065677f4b1c15f2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:22 -0400 Subject: NFS: Fix up O_DIRECT results if we read or wrote something, we must report it Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 979b3c4..c7326c2 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -353,10 +353,12 @@ static ssize_t nfs_direct_wait(struct nfs_direct_req *dreq) result = wait_for_completion_killable(&dreq->completion); + if (!result) { + result = dreq->count; + WARN_ON_ONCE(dreq->count < 0); + } if (!result) result = dreq->error; - if (!result) - result = dreq->count; out: return (ssize_t) result; @@ -386,8 +388,10 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq, bool write) if (dreq->iocb) { long res = (long) dreq->error; - if (!res) + if (dreq->count != 0) { res = (long) dreq->count; + WARN_ON_ONCE(dreq->count < 0); + } dreq->iocb->ki_complete(dreq->iocb, res, 0); } -- cgit v0.10.2 From cea7f829d3ea6e87a67220bc417260b858e278ff Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Fri, 17 Jun 2016 16:48:23 -0400 Subject: nfs4: Fix potential use after free of state in nfs4_do_reclaim. Commit e8d975e73e5f ("fixing infinite OPEN loop in 4.0 stateid recovery") introduced access to state after it was just potentially freed by nfs4_put_open_state leading to a random data corruption somewhere. BUG: unable to handle kernel paging request at ffff88004941ee40 IP: [] nfs4_do_reclaim+0x461/0x740 PGD 3501067 PUD 3504067 PMD 6ff37067 PTE 800000004941e060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: loop rpcsec_gss_krb5 acpi_cpufreq tpm_tis joydev i2c_piix4 pcspkr tpm virtio_console nfsd ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops floppy serio_raw virtio_blk drm CPU: 6 PID: 2161 Comm: 192.168.10.253- Not tainted 4.7.0-rc1-vm-nfs+ #112 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800463dcd00 ti: ffff88003ff48000 task.ti: ffff88003ff48000 RIP: 0010:[] [] nfs4_do_reclaim+0x461/0x740 RSP: 0018:ffff88003ff4bd68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffff81a49900 RCX: 00000000000000e8 RDX: 00000000000000e8 RSI: ffff8800418b9930 RDI: ffff880040c96c88 RBP: ffff88003ff4bdf8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880040c96c98 R13: ffff88004941ee20 R14: ffff88004941ee40 R15: ffff88004941ee00 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88004941ee40 CR3: 0000000060b0b000 CR4: 00000000000006e0 Stack: ffffffff813baad5 ffff8800463dcd00 ffff880000000001 ffffffff810e6b68 ffff880043ddbc88 ffff8800418b9800 ffff8800418b98c8 ffff88004941ee48 ffff880040c96c90 ffff880040c96c00 ffff880040c96c20 ffff880040c96c40 Call Trace: [] ? nfs4_do_reclaim+0x35/0x740 [] ? trace_hardirqs_on_caller+0x128/0x1b0 [] nfs4_run_state_manager+0x5ed/0xa40 [] ? nfs4_do_reclaim+0x740/0x740 [] ? nfs4_do_reclaim+0x740/0x740 [] kthread+0x101/0x120 [] ? trace_hardirqs_on_caller+0x128/0x1b0 [] ret_from_fork+0x1f/0x40 [] ? kthread_create_on_node+0x250/0x250 Code: 65 80 4c 8b b5 78 ff ff ff e8 fc 88 4c 00 48 8b 7d 88 e8 13 67 d2 ff 49 8b 47 40 a8 02 0f 84 d3 01 00 00 4c 89 ff e8 7f f9 ff ff 41 80 26 7f 48 8b 7d c8 e8 b1 84 4c 00 e9 39 fd ff ff 3d e6 RIP [] nfs4_do_reclaim+0x461/0x740 RSP CR2: ffff88004941ee40 Signed-off-by: Oleg Drokin Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 9679f47..834b875 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1488,9 +1488,9 @@ restart: } spin_unlock(&state->state_lock); } - nfs4_put_open_state(state); clear_bit(NFS_STATE_RECLAIM_NOGRACE, &state->flags); + nfs4_put_open_state(state); spin_lock(&sp->so_lock); goto restart; } -- cgit v0.10.2 From 5e3a98883e7ebdd1440f829a9e9dd5c3d2c5903b Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 17 Jun 2016 16:48:24 -0400 Subject: pnfs_nfs: fix _cancel_empty_pagelist pnfs_generic_commit_cancel_empty_pagelist calls nfs_commitdata_release, but that is wrong: nfs_commitdata_release puts the open context, something that isn't valid until nfs_init_commit is called, which is never the case when pnfs_generic_commit_cancel_empty_pagelist is called. This was introduced in "nfs: avoid race that crashes nfs_init_commit". Signed-off-by: Weston Andros Adamson Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c index 0dfc476..b38e3c0 100644 --- a/fs/nfs/pnfs_nfs.c +++ b/fs/nfs/pnfs_nfs.c @@ -247,7 +247,11 @@ void pnfs_fetch_commit_bucket_list(struct list_head *pages, } /* Helper function for pnfs_generic_commit_pagelist to catch an empty - * page list. This can happen when two commits race. */ + * page list. This can happen when two commits race. + * + * This must be called instead of nfs_init_commit - call one or the other, but + * not both! + */ static bool pnfs_generic_commit_cancel_empty_pagelist(struct list_head *pages, struct nfs_commit_data *data, @@ -256,7 +260,11 @@ pnfs_generic_commit_cancel_empty_pagelist(struct list_head *pages, if (list_empty(pages)) { if (atomic_dec_and_test(&cinfo->mds->rpcs_out)) wake_up_atomic_t(&cinfo->mds->rpcs_out); - nfs_commitdata_release(data); + /* don't call nfs_commitdata_release - it tries to put + * the open_context which is not acquired until nfs_init_commit + * which has not been called on @data */ + WARN_ON_ONCE(data->context); + nfs_commit_free(data); return true; } -- cgit v0.10.2 From cbebaf897e5c4862567eb799dc84acc5d7ee2678 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:25 -0400 Subject: NFS: Fix a double page unlock Since commit 0bcbf039f6b2, nfs_readpage_release() has been used to unlock the page in the read code. Fixes: 0bcbf039f6b2 ("nfs: handle request add failure properly") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 6776d7a..572e5b3 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -367,13 +367,13 @@ readpage_async_filler(void *data, struct page *page) nfs_list_remove_request(new); nfs_readpage_release(new); error = desc->pgio->pg_error; - goto out_unlock; + goto out; } return 0; out_error: error = PTR_ERR(new); -out_unlock: unlock_page(page); +out: return error; } -- cgit v0.10.2 From 2d148c7e84962429a79092a56d3736a8d984f595 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:26 -0400 Subject: NFSv4.1/pnfs: Mark the layout stateid invalid when all segments are removed According to RFC5661, section 12.5.3. the layout stateid is no longer valid once the client no longer holds any layout segments. Ensure that we mark it invalid. Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index ca488b5..0fbe734 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -361,8 +361,10 @@ pnfs_layout_remove_lseg(struct pnfs_layout_hdr *lo, list_del_init(&lseg->pls_list); /* Matched by pnfs_get_layout_hdr in pnfs_layout_insert_lseg */ atomic_dec(&lo->plh_refcount); - if (list_empty(&lo->plh_segs)) + if (list_empty(&lo->plh_segs)) { + set_bit(NFS_LAYOUT_INVALID_STID, &lo->plh_flags); clear_bit(NFS_LAYOUT_BULK_RECALL, &lo->plh_flags); + } rpc_wake_up(&NFS_SERVER(inode)->roc_rpcwaitq); } -- cgit v0.10.2 From d8fdb47fae5febc02e62da121f85625244b98b2e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:27 -0400 Subject: NFS: Don't let readdirplus revalidate an inode that was marked as stale Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index aaf7bd0..a924d66 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -424,12 +424,17 @@ static int xdr_decode(nfs_readdir_descriptor_t *desc, static int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry) { + struct inode *inode; struct nfs_inode *nfsi; if (d_really_is_negative(dentry)) return 0; - nfsi = NFS_I(d_inode(dentry)); + inode = d_inode(dentry); + if (is_bad_inode(inode) || NFS_STALE(inode)) + return 0; + + nfsi = NFS_I(inode); if (entry->fattr->fileid == nfsi->fileid) return 1; if (nfs_compare_fh(entry->fh, &nfsi->fh) == 0) -- cgit v0.10.2 From 916ec34d0bafe95b977908acd8b3153c9df6f9d6 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:28 -0400 Subject: NFS: Fix potential race in nfs_fhget() If we don't set the mode correctly in nfs_init_locked(), then there is potential for a race with a second call to nfs_fhget that will cause inode aliasing. Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 52e7d68..dda689d 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -282,6 +282,7 @@ nfs_init_locked(struct inode *inode, void *opaque) struct nfs_fattr *fattr = desc->fattr; set_nfs_fileid(inode, fattr->fileid); + inode->i_mode = fattr->mode; nfs_copy_fh(NFS_FH(inode), desc->fh); return 0; } -- cgit v0.10.2 From 1b982ea2ca398bdaeab6cf2aba459a9ca808f1f3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2016 16:48:29 -0400 Subject: NFS: Fix an unused variable warning Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index a924d66..2817cce 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1368,7 +1368,6 @@ EXPORT_SYMBOL_GPL(nfs_dentry_operations); struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, unsigned int flags) { struct dentry *res; - struct dentry *parent; struct inode *inode = NULL; struct nfs_fh *fhandle = NULL; struct nfs_fattr *fattr = NULL; @@ -1398,7 +1397,6 @@ struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, unsigned in if (IS_ERR(label)) goto out; - parent = dentry->d_parent; /* Protect against concurrent sillydeletes */ trace_nfs_lookup_enter(dir, dentry, flags); error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, fhandle, fattr, label); -- cgit v0.10.2 From 4995734e973a2c2e9c6f6413cbad9913fc4df0dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 24 Jun 2016 09:07:39 -0700 Subject: acpi, nfit: fix acpi_check_dsm() vs zero functions implemented QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on configuration it may only implement the function0 dsm to indicate that no other DSMs are available. Commit 31eca76ba2fc "nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but QEMU is spec compliant. Per the spec the way to indicate that no functions are supported is: If Function Index is zero, the return is a buffer containing one bit for each function index, starting with zero. Bit 0 indicates whether there is support for any functions other than function 0 for the specified UUID and Revision ID. If set to zero, no functions are supported (other than function zero) for the specified UUID and Revision ID. Update the nfit driver to determine the family (interface UUID) without requiring the implementation to define any other functions, i.e. short-circuit acpi_check_dsm() to succeed per the spec. The nfit driver appears to be the only user passing funcs==0 to acpi_check_dsm(), so this behavior change of the common routine should be limited to the probing done by the nfit driver. Cc: Len Brown Cc: Jerry Hoemann Acked-by: "Rafael J. Wysocki" Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Reported-by: Xiao Guangrong Tested-by: Xiao Guangrong Signed-off-by: Dan Williams diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 2215fc8..32579a7 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -1131,11 +1131,11 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, /* * Until standardization materializes we need to consider up to 3 - * different command sets. Note, that checking for function0 (bit0) - * tells us if any commands are reachable through this uuid. + * different command sets. Note, that checking for zero functions + * tells us if any commands might be reachable through this uuid. */ for (i = NVDIMM_FAMILY_INTEL; i <= NVDIMM_FAMILY_HPE2; i++) - if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 1)) + if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 0)) break; /* limit the supported commands to those that are publicly documented */ diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 22c0995..b4de130 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -680,9 +680,6 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) u64 mask = 0; union acpi_object *obj; - if (funcs == 0) - return false; - obj = acpi_evaluate_dsm(handle, uuid, rev, 0, NULL); if (!obj) return false; @@ -695,6 +692,9 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); ACPI_FREE(obj); + if (funcs == 0) + return true; + /* * Bit 0 indicates whether there's support for any functions other than * function 0 for the specified UUID and revision. -- cgit v0.10.2 From 4fcd1813e6404dd4420c7d12fb483f9320f0bf93 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 22 Jun 2016 20:12:05 -0500 Subject: Fix reconnect to not defer smb3 session reconnect long after socket reconnect Azure server blocks clients that open a socket and don't do anything on it. In our reconnect scenarios, we can reconnect the tcp session and detect the socket is available but we defer the negprot and SMB3 session setup and tree connect reconnection until the next i/o is requested, but this looks suspicous to some servers who expect SMB3 negprog and session setup soon after a socket is created. In the echo thread, reconnect SMB3 sessions and tree connections that are disconnected. A later patch will replay persistent (and resilient) handle opens. CC: Stable Signed-off-by: Steve French Acked-by: Pavel Shilovsky diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 66736f5..7d2b15c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -428,7 +428,9 @@ cifs_echo_request(struct work_struct *work) * server->ops->need_neg() == true. Also, no need to ping if * we got a response recently. */ - if (!server->ops->need_neg || server->ops->need_neg(server) || + + if (server->tcpStatus == CifsNeedReconnect || + server->tcpStatus == CifsExiting || server->tcpStatus == CifsNew || (server->ops->can_echo && !server->ops->can_echo(server)) || time_before(jiffies, server->lstrp + echo_interval - HZ)) goto requeue_echo; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index c3e61a7..29e06db 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1812,6 +1812,33 @@ SMB2_echo(struct TCP_Server_Info *server) cifs_dbg(FYI, "In echo request\n"); + if (server->tcpStatus == CifsNeedNegotiate) { + struct list_head *tmp, *tmp2; + struct cifs_ses *ses; + struct cifs_tcon *tcon; + + cifs_dbg(FYI, "Need negotiate, reconnecting tcons\n"); + spin_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifs_ses, smb_ses_list); + list_for_each(tmp2, &ses->tcon_list) { + tcon = list_entry(tmp2, struct cifs_tcon, + tcon_list); + /* add check for persistent handle reconnect */ + if (tcon && tcon->need_reconnect) { + spin_unlock(&cifs_tcp_ses_lock); + rc = smb2_reconnect(SMB2_ECHO, tcon); + spin_lock(&cifs_tcp_ses_lock); + } + } + } + spin_unlock(&cifs_tcp_ses_lock); + } + + /* if no session, renegotiate failed above */ + if (server->tcpStatus == CifsNeedNegotiate) + return -EIO; + rc = small_smb2_init(SMB2_ECHO, NULL, (void **)&req); if (rc) return rc; -- cgit v0.10.2 From 45e8a2583d97ca758a55c608f78c4cef562644d1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 22 Jun 2016 21:07:32 -0500 Subject: File names with trailing period or space need special case conversion POSIX allows files with trailing spaces or a trailing period but SMB3 does not, so convert these using the normal Services For Mac mapping as we do for other reserved characters such as : < > | ? * This is similar to what Macs do for the same problem over SMB3. CC: Stable Signed-off-by: Steve French Acked-by: Pavel Shilovsky diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 5a53ac6..02b071bf 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -101,6 +101,12 @@ convert_sfm_char(const __u16 src_char, char *target) case SFM_SLASH: *target = '\\'; break; + case SFM_SPACE: + *target = ' '; + break; + case SFM_PERIOD: + *target = '.'; + break; default: return false; } @@ -404,7 +410,7 @@ static __le16 convert_to_sfu_char(char src_char) return dest_char; } -static __le16 convert_to_sfm_char(char src_char) +static __le16 convert_to_sfm_char(char src_char, bool end_of_string) { __le16 dest_char; @@ -427,6 +433,18 @@ static __le16 convert_to_sfm_char(char src_char) case '|': dest_char = cpu_to_le16(SFM_PIPE); break; + case '.': + if (end_of_string) + dest_char = cpu_to_le16(SFM_PERIOD); + else + dest_char = 0; + break; + case ' ': + if (end_of_string) + dest_char = cpu_to_le16(SFM_SPACE); + else + dest_char = 0; + break; default: dest_char = 0; } @@ -469,9 +487,16 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, /* see if we must remap this char */ if (map_chars == SFU_MAP_UNI_RSVD) dst_char = convert_to_sfu_char(src_char); - else if (map_chars == SFM_MAP_UNI_RSVD) - dst_char = convert_to_sfm_char(src_char); - else + else if (map_chars == SFM_MAP_UNI_RSVD) { + bool end_of_string; + + if (i == srclen - 1) + end_of_string = true; + else + end_of_string = false; + + dst_char = convert_to_sfm_char(src_char, end_of_string); + } else dst_char = 0; /* * FIXME: We can not handle remapping backslash (UNI_SLASH) diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h index bdc52cb..479bc0a 100644 --- a/fs/cifs/cifs_unicode.h +++ b/fs/cifs/cifs_unicode.h @@ -64,6 +64,8 @@ #define SFM_LESSTHAN ((__u16) 0xF023) #define SFM_PIPE ((__u16) 0xF027) #define SFM_SLASH ((__u16) 0xF026) +#define SFM_PERIOD ((__u16) 0xF028) +#define SFM_SPACE ((__u16) 0xF029) /* * Mapping mechanism to use when one of the seven reserved characters is -- cgit v0.10.2 From 7e8b3dfef16375dbfeb1f36a83eb9f27117c51fd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 23 Jun 2016 14:54:37 -0400 Subject: USB: EHCI: declare hostpc register as zero-length array The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by: Alan Stern Reported-by: Wilfried Klaebe Tested-by: Wilfried Klaebe CC: Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 966889a..e479033 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -180,11 +180,11 @@ struct ehci_regs { * PORTSCx */ /* HOSTPC: offset 0x84 */ - u32 hostpc[1]; /* HOSTPC extension */ + u32 hostpc[0]; /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ - u32 reserved5[16]; + u32 reserved5[17]; /* USBMODE_EX: offset 0xc8 */ u32 usbmode_ex; /* USB Device mode extension */ -- cgit v0.10.2 From b42b90d177d0c7f46f9c888c10c7900578ae7e09 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 24 Jun 2016 23:49:03 -0400 Subject: ceph: fix d_obtain_alias() misuses on failure d_obtain_alias() will have done iput() Signed-off-by: Al Viro diff --git a/fs/ceph/export.c b/fs/ceph/export.c index 6e72c98..1780218 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -95,10 +95,8 @@ static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino) } dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - iput(inode); + if (IS_ERR(dentry)) return dentry; - } err = ceph_init_dentry(dentry); if (err < 0) { dput(dentry); @@ -167,10 +165,8 @@ static struct dentry *__get_parent(struct super_block *sb, return ERR_PTR(-ENOENT); dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - iput(inode); + if (IS_ERR(dentry)) return dentry; - } err = ceph_init_dentry(dentry); if (err < 0) { dput(dentry); @@ -210,7 +206,7 @@ static struct dentry *ceph_fh_to_parent(struct super_block *sb, dout("fh_to_parent %llx\n", cfh->parent_ino); dentry = __get_parent(sb, NULL, cfh->ino); - if (IS_ERR(dentry) && PTR_ERR(dentry) == -ENOENT) + if (unlikely(dentry == ERR_PTR(-ENOENT))) dentry = __fh_to_dentry(sb, cfh->parent_ino); return dentry; } -- cgit v0.10.2 From 1b45996d2ebf9680ccd0db875fc668aa025f40fd Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 17 May 2016 11:41:04 -0700 Subject: tty: vt: Fix soft lockup in fbcon cursor blink timer. We are getting somewhat random soft lockups with this signature: [ 86.992215] [] el1_irq+0xa0/0x10c [ 86.997082] [] cursor_timer_handler+0x30/0x54 [ 87.002991] [] call_timer_fn+0x54/0x1a8 [ 87.008378] [] run_timer_softirq+0x1c4/0x2bc [ 87.014200] [] __do_softirq+0x114/0x344 [ 87.019590] [] irq_exit+0x74/0x98 [ 87.024458] [] __handle_domain_irq+0x98/0xfc [ 87.030278] [] gic_handle_irq+0x94/0x190 This is caused by the vt visual_init() function calling into fbcon_init() with a vc_cur_blink_ms value of zero. This is a transient condition, as it is later set to a non-zero value. But, if the timer happens to expire while the blink rate is zero, it goes into an endless loop, and we get soft lockup. The fix is to initialize vc_cur_blink_ms before calling the con_init() function. Signed-off-by: David Daney Cc: stable@vger.kernel.org Acked-by: Pavel Machek Tested-by: Ming Lei Acked-by: Scot Doyle Tested-by: Henrique de Moraes Holschuh Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index dc12532..5b0fe97 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -750,6 +750,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; vc->vc_panic_force_write = false; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; vc->vc_sw->con_init(vc, init); if (!vc->vc_complement_mask) vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; -- cgit v0.10.2 From 81e43960dce1c8e58e682fb3ec26c1d8f83a9afc Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sat, 25 Jun 2016 07:58:45 -0400 Subject: ALSA: hda - fix read before array start UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [] dump_stack+0x86/0xd3 [ 16.078317] [] ubsan_epilogue+0xd/0x40 [ 16.078324] [] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [] driver_probe_device+0x101/0x380 [ 16.078430] [] __driver_attach+0xb9/0x100 [ 16.078438] [] ? driver_probe_device+0x380/0x380 [ 16.078444] [] bus_for_each_dev+0x70/0xc0 [ 16.078449] [] driver_attach+0x27/0x50 [ 16.078454] [] bus_add_driver+0x166/0x2c0 [ 16.078460] [] ? 0xffffffffa0369000 [ 16.078465] [] driver_register+0x7d/0x130 [ 16.078477] [] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [] do_one_initcall+0x4e/0x1d0 [ 16.078499] [] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [] ? do_init_module+0x28/0x273 [ 16.078515] [] do_init_module+0x9b/0x273 [ 16.078522] [] load_module+0x20b2/0x3410 [ 16.078527] [] ? m_show+0x210/0x210 [ 16.078533] [] ? kernel_read+0x66/0xe0 [ 16.078541] [] SYSC_finit_module+0xba/0xc0 [ 16.078547] [] SyS_finit_module+0xe/0x10 [ 16.078552] [] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by: Bob Copeland Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 320445f..79c7b34 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -3977,6 +3977,8 @@ static hda_nid_t set_path_power(struct hda_codec *codec, hda_nid_t nid, for (n = 0; n < spec->paths.used; n++) { path = snd_array_elem(&spec->paths, n); + if (!path->depth) + continue; if (path->path[0] == nid || path->path[path->depth - 1] == nid) { bool pin_old = path->pin_enabled; -- cgit v0.10.2 From 18f5839932e5c8c019f394d433dc5efcd6ae737a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 23 Jun 2016 22:07:03 +0530 Subject: ASoC: Intel: atom: fix missing breaks that would cause the wrong operation to execute Now we correctly error an attempt to execute an unsupported operation. Signed-off-by: Alan Cox Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/atom/sst-mfld-platform-compress.c b/sound/soc/intel/atom/sst-mfld-platform-compress.c index 3951689..1bead81 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-compress.c +++ b/sound/soc/intel/atom/sst-mfld-platform-compress.c @@ -182,24 +182,29 @@ static int sst_platform_compr_trigger(struct snd_compr_stream *cstream, int cmd) case SNDRV_PCM_TRIGGER_START: if (stream->compr_ops->stream_start) return stream->compr_ops->stream_start(sst->dev, stream->id); + break; case SNDRV_PCM_TRIGGER_STOP: if (stream->compr_ops->stream_drop) return stream->compr_ops->stream_drop(sst->dev, stream->id); + break; case SND_COMPR_TRIGGER_DRAIN: if (stream->compr_ops->stream_drain) return stream->compr_ops->stream_drain(sst->dev, stream->id); + break; case SND_COMPR_TRIGGER_PARTIAL_DRAIN: if (stream->compr_ops->stream_partial_drain) return stream->compr_ops->stream_partial_drain(sst->dev, stream->id); + break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: if (stream->compr_ops->stream_pause) return stream->compr_ops->stream_pause(sst->dev, stream->id); + break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (stream->compr_ops->stream_pause_release) return stream->compr_ops->stream_pause_release(sst->dev, stream->id); - default: - return -EINVAL; + break; } + return -EINVAL; } static int sst_platform_compr_pointer(struct snd_compr_stream *cstream, -- cgit v0.10.2 From ef3149eb3ddb7f9125e11c90f8330e371b55cffd Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 22 Jun 2016 20:43:30 +0100 Subject: staging: iio: accel: fix error check sca3000_read_ctrl_reg() returns a negative number on failure, check for this instead of zero. Signed-off-by: Luis de Bethencourt Cc: Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index a8f533a..ec12181 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -594,7 +594,7 @@ static ssize_t sca3000_read_frequency(struct device *dev, goto error_ret_mut; ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL); mutex_unlock(&st->lock); - if (ret) + if (ret < 0) goto error_ret; val = ret; if (base_freq > 0) -- cgit v0.10.2 From 0c1f91b98552da49d9d8eed32b3132a58d2f4598 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Jun 2016 15:22:24 +0200 Subject: iio: accel: kxsd9: fix the usage of spi_w8r8() These two spi_w8r8() calls return a value with is used by the code following the error check. The dubious use was caused by a cleanup patch. Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index 923f565..3a9f106 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -81,7 +81,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro) mutex_lock(&st->buf_lock); ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C); st->tx[1] = (ret & ~KXSD9_FS_MASK) | i; @@ -163,7 +163,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_SCALE: ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); - if (ret) + if (ret < 0) goto error_ret; *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK]; ret = IIO_VAL_INT_PLUS_MICRO; -- cgit v0.10.2 From 6b7f4e25f3309f106a5c7ff42c8231494cf285d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:32 +0100 Subject: iio:ad7266: Fix broken regulator error handling All regulator_get() variants return either a pointer to a regulator or an ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we use NULL as a valid regulator. Fix this by using IS_ERR() as expected. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 21e19b6..835d45d 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -397,7 +397,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); st->reg = devm_regulator_get(&spi->dev, "vref"); - if (!IS_ERR_OR_NULL(st->reg)) { + if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) return ret; -- cgit v0.10.2 From e5511c816e5ac4909bdd38e85ac344e2b9b8e984 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:33 +0100 Subject: iio:ad7266: Fix support for optional regulators The ad7266 driver attempts to support deciding between the use of internal and external power supplies by checking to see if an error is returned when requesting the regulator. This doesn't work with the current code since the driver uses a normal regulator_get() which is for non-optional supplies and so assumes that if a regulator is not provided by the platform then this is a bug in the platform integration and so substitutes a dummy regulator. Use regulator_get_optional() instead which indicates to the framework that the regulator may be absent and provides a dummy regulator instead. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 835d45d..655b36b 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -396,7 +396,7 @@ static int ad7266_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vref"); + st->reg = devm_regulator_get_optional(&spi->dev, "vref"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) -- cgit v0.10.2 From 68b356eb3d9f5e38910fb62e22a78e2a18d544ae Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jun 2016 13:53:34 +0100 Subject: iio:ad7266: Fix probe deferral for vref Currently the ad7266 driver treats any failure to get vref as though the regulator were not present but this means that if probe deferral is triggered the driver will act as though the regulator were not present. Instead only use the internal reference if we explicitly got -ENODEV which is what is returned for absent regulators. Signed-off-by: Mark Brown Cc: Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 655b36b..2123f0a 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -408,6 +408,9 @@ static int ad7266_probe(struct spi_device *spi) st->vref_mv = ret / 1000; } else { + /* Any other error indicates that the regulator does exist */ + if (PTR_ERR(st->reg) != -ENODEV) + return PTR_ERR(st->reg); /* Use internal reference */ st->vref_mv = 2500; } -- cgit v0.10.2 From 5353ed8deedee9e5acb9f896e9032158f5d998de Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Jun 2016 15:40:27 +0100 Subject: devpts: fix null pointer dereference on failed memory allocation An ENOMEM when creating a pair tty in tty_ldisc_setup causes a null pointer dereference in devpts_kill_index because tty->link->driver_data is NULL. The oops was triggered with the pty stressor in stress-ng when in a low memory condition. tty_init_dev tries to clean up a tty_ldisc_setup ENOMEM error by calling release_tty, however, this ultimately tries to clean up the NULL pair'd tty in pty_unix98_remove, triggering the Oops. Add check to pty_unix98_remove to only clean up fsi if it is not NULL. Ooops: [ 23.020961] Oops: 0000 [#1] SMP [ 23.020976] Modules linked in: ppdev snd_hda_codec_generic snd_hda_intel snd_hda_codec parport_pc snd_hda_core snd_hwdep parport snd_pcm input_leds joydev snd_timer serio_raw snd soundcore i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel qxl aes_x86_64 ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect psmouse sysimgblt floppy fb_sys_fops drm pata_acpi jitterentropy_rng drbg ansi_cprng [ 23.020978] CPU: 0 PID: 1452 Comm: stress-ng-pty Not tainted 4.7.0-rc4+ #2 [ 23.020978] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 23.020979] task: ffff88007ba30000 ti: ffff880078ea8000 task.ti: ffff880078ea8000 [ 23.020981] RIP: 0010:[] [] ida_remove+0x1f/0x120 [ 23.020981] RSP: 0018:ffff880078eabb60 EFLAGS: 00010a03 [ 23.020982] RAX: 4444444444444567 RBX: 0000000000000000 RCX: 000000000000001f [ 23.020982] RDX: 000000000000014c RSI: 000000000000026f RDI: 0000000000000000 [ 23.020982] RBP: ffff880078eabb70 R08: 0000000000000004 R09: 0000000000000036 [ 23.020983] R10: 000000000000026f R11: 0000000000000000 R12: 000000000000026f [ 23.020983] R13: 000000000000026f R14: ffff88007c944b40 R15: 000000000000026f [ 23.020984] FS: 00007f9a2f3cc700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 23.020984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.020985] CR2: 0000000000000010 CR3: 000000006c81b000 CR4: 00000000001406f0 [ 23.020988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.020988] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.020988] Stack: [ 23.020989] 0000000000000000 000000000000026f ffff880078eabb90 ffffffff812a5a99 [ 23.020990] 0000000000000000 00000000fffffff4 ffff880078eabba8 ffffffff814f9cbe [ 23.020991] ffff88007965c800 ffff880078eabbc8 ffffffff814eef43 fffffffffffffff4 [ 23.020991] Call Trace: [ 23.021000] [] devpts_kill_index+0x29/0x50 [ 23.021002] [] pty_unix98_remove+0x2e/0x50 [ 23.021006] [] release_tty+0xb3/0x1b0 [ 23.021007] [] tty_init_dev+0xd4/0x1c0 [ 23.021011] [] ptmx_open+0xae/0x190 [ 23.021013] [] chrdev_open+0xbf/0x1b0 [ 23.021015] [] do_dentry_open+0x203/0x310 [ 23.021016] [] ? cdev_put+0x30/0x30 [ 23.021017] [] vfs_open+0x54/0x80 [ 23.021018] [] ? may_open+0x8c/0x100 [ 23.021019] [] path_openat+0x2eb/0x1440 [ 23.021020] [] ? putname+0x54/0x60 [ 23.021022] [] ? n_tty_ioctl_helper+0x27/0x100 [ 23.021023] [] do_filp_open+0x91/0x100 [ 23.021024] [] ? getname_flags+0x56/0x1f0 [ 23.021026] [] ? __alloc_fd+0x46/0x190 [ 23.021027] [] do_sys_open+0x124/0x210 [ 23.021028] [] SyS_open+0x1e/0x20 [ 23.021035] [] entry_SYSCALL_64_fastpath+0x1e/0xa8 [ 23.021044] Code: 63 28 45 31 e4 eb dd 0f 1f 44 00 00 55 4c 63 d6 48 ba 89 88 88 88 88 88 88 88 4c 89 d0 b9 1f 00 00 00 48 f7 e2 48 89 e5 41 54 53 <8b> 47 10 48 89 fb 8d 3c c5 00 00 00 00 48 c1 ea 09 b8 01 00 00 [ 23.021045] RIP [] ida_remove+0x1f/0x120 [ 23.021045] RSP [ 23.021046] CR2: 0000000000000010 Signed-off-by: Colin Ian King Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index f856c45..51e0d32 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -667,8 +667,11 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) fsi = tty->driver_data; else fsi = tty->link->driver_data; - devpts_kill_index(fsi, tty->index); - devpts_release(fsi); + + if (fsi) { + devpts_kill_index(fsi, tty->index); + devpts_release(fsi); + } } static const struct tty_operations ptm_unix98_ops = { -- cgit v0.10.2 From a37503bc387ce2434106d4bf4870bd73081c7355 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Wed, 22 Jun 2016 12:40:50 -0500 Subject: net: smsc911x: Fix bug where PHY interrupts are overwritten by 0 By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton Reviewed-by: Andrew Lunn Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 8af2556..b5ab5e1 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -116,7 +116,6 @@ struct smsc911x_data { struct phy_device *phy_dev; struct mii_bus *mii_bus; - int phy_irq[PHY_MAX_ADDR]; unsigned int using_extphy; int last_duplex; int last_carrier; @@ -1073,7 +1072,6 @@ static int smsc911x_mii_init(struct platform_device *pdev, pdata->mii_bus->priv = pdata; pdata->mii_bus->read = smsc911x_mii_read; pdata->mii_bus->write = smsc911x_mii_write; - memcpy(pdata->mii_bus->irq, pdata->phy_irq, sizeof(pdata->mii_bus)); pdata->mii_bus->parent = &pdev->dev; -- cgit v0.10.2 From 7dd4912594daf769a46744848b05bd5bc6d62469 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 24 Jun 2016 15:53:54 +0200 Subject: sched/fair: Fix effective_load() to consistently use smoothed load Starting with the following commit: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") calc_tg_weight() doesn't compute the right value as expected by effective_load(). The difference is in the 'correction' term. In order to ensure \Sum rw_j >= rw_i we cannot use tg->load_avg directly, since that might be lagging a correction on the current cfs_rq->avg.load_avg value. Therefore we use tg->load_avg - cfs_rq->tg_load_avg_contrib + cfs_rq->avg.load_avg. Now, per the referenced commit, calc_tg_weight() doesn't use cfs_rq->avg.load_avg, as is later used in @w, but uses cfs_rq->load.weight instead. So stop using calc_tg_weight() and do it explicitly. The effects of this bug are wake_affine() making randomly poor choices in cgroup-intense workloads. Signed-off-by: Peter Zijlstra (Intel) Cc: # v4.3+ Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") Signed-off-by: Ingo Molnar diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index bdcbeea..cc48bef 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -735,8 +735,6 @@ void post_init_entity_util_avg(struct sched_entity *se) } } -static inline unsigned long cfs_rq_runnable_load_avg(struct cfs_rq *cfs_rq); -static inline unsigned long cfs_rq_load_avg(struct cfs_rq *cfs_rq); #else void init_entity_runnable_average(struct sched_entity *se) { @@ -4946,19 +4944,24 @@ static long effective_load(struct task_group *tg, int cpu, long wl, long wg) return wl; for_each_sched_entity(se) { - long w, W; + struct cfs_rq *cfs_rq = se->my_q; + long W, w = cfs_rq_load_avg(cfs_rq); - tg = se->my_q->tg; + tg = cfs_rq->tg; /* * W = @wg + \Sum rw_j */ - W = wg + calc_tg_weight(tg, se->my_q); + W = wg + atomic_long_read(&tg->load_avg); + + /* Ensure \Sum rw_j >= rw_i */ + W -= cfs_rq->tg_load_avg_contrib; + W += w; /* * w = rw_i + @wl */ - w = cfs_rq_load_avg(se->my_q) + wl; + w += wl; /* * wl = S * s'_i; see (2) -- cgit v0.10.2 From ea1dc6fc6242f991656e35e2ed3d90ec1cd13418 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 24 Jun 2016 16:11:02 +0200 Subject: sched/fair: Fix calc_cfs_shares() fixed point arithmetics width confusion Commit: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") did something non-obvious but also did it buggy yet latent. The problem was exposed for real by a later commit in the v4.7 merge window: 2159197d6677 ("sched/core: Enable increased load resolution on 64-bit kernels") ... after which tg->load_avg and cfs_rq->load.weight had different units (10 bit fixed point and 20 bit fixed point resp.). Add a comment to explain the use of cfs_rq->load.weight over the 'natural' cfs_rq->avg.load_avg and add scale_load_down() to correct for the difference in unit. Since this is (now, as per a previous commit) the only user of calc_tg_weight(), collapse it. The effects of this bug should be randomly inconsistent SMP-balancing of cgroups workloads. Reported-by: Jirka Hladky Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 2159197d6677 ("sched/core: Enable increased load resolution on 64-bit kernels") Fixes: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") Signed-off-by: Ingo Molnar diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index cc48bef..c8c5d2d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2497,28 +2497,22 @@ account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se) #ifdef CONFIG_FAIR_GROUP_SCHED # ifdef CONFIG_SMP -static inline long calc_tg_weight(struct task_group *tg, struct cfs_rq *cfs_rq) +static long calc_cfs_shares(struct cfs_rq *cfs_rq, struct task_group *tg) { - long tg_weight; + long tg_weight, load, shares; /* - * Use this CPU's real-time load instead of the last load contribution - * as the updating of the contribution is delayed, and we will use the - * the real-time load to calc the share. See update_tg_load_avg(). + * This really should be: cfs_rq->avg.load_avg, but instead we use + * cfs_rq->load.weight, which is its upper bound. This helps ramp up + * the shares for small weight interactive tasks. */ - tg_weight = atomic_long_read(&tg->load_avg); - tg_weight -= cfs_rq->tg_load_avg_contrib; - tg_weight += cfs_rq->load.weight; - - return tg_weight; -} + load = scale_load_down(cfs_rq->load.weight); -static long calc_cfs_shares(struct cfs_rq *cfs_rq, struct task_group *tg) -{ - long tg_weight, load, shares; + tg_weight = atomic_long_read(&tg->load_avg); - tg_weight = calc_tg_weight(tg, cfs_rq); - load = cfs_rq->load.weight; + /* Ensure tg_weight >= load */ + tg_weight -= cfs_rq->tg_load_avg_contrib; + tg_weight += load; shares = (tg->shares * load); if (tg_weight) @@ -2537,6 +2531,7 @@ static inline long calc_cfs_shares(struct cfs_rq *cfs_rq, struct task_group *tg) return tg->shares; } # endif /* CONFIG_SMP */ + static void reweight_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, unsigned long weight) { -- cgit v0.10.2 From 8e96a87c5431c256feb65bcfc5aec92d9f7839b6 Mon Sep 17 00:00:00 2001 From: Cyril Bur Date: Fri, 17 Jun 2016 14:58:34 +1000 Subject: powerpc/tm: Always reclaim in start_thread() for exec() class syscalls Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408fa65 ("powerpc: Hook in new transactional memory code") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Cyril Bur Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e2f12cb..0b93893 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1505,6 +1505,16 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) current->thread.regs = regs - 1; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* + * Clear any transactional state, we're exec()ing. The cause is + * not important as there will never be a recheckpoint so it's not + * user visible. + */ + if (MSR_TM_SUSPENDED(mfmsr())) + tm_reclaim_current(0); +#endif + memset(regs->gpr, 0, sizeof(regs->gpr)); regs->ctr = 0; regs->link = 0; -- cgit v0.10.2 From 0efce9da1255f13d910842b62cb14371044a3c50 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 8 Jun 2016 11:38:55 +0100 Subject: arm64: KVM: fix build with CONFIG_ARM_PMU disabled When CONFIG_ARM_PMU is disabled, we get the following build error: arch/arm64/kvm/sys_regs.c: In function 'pmu_counter_idx_valid': arch/arm64/kvm/sys_regs.c:564:27: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/sys_regs.c:564:27: note: each undeclared identifier is reported only once for each function it appears in arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evcntr': arch/arm64/kvm/sys_regs.c:592:10: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) idx = ARMV8_PMU_CYCLE_IDX; ^ arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evtyper': arch/arm64/kvm/sys_regs.c:638:14: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx == ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/hyp/switch.c:86:15: error: 'ARMV8_PMU_USERENR_MASK' undeclared (first use in this function) write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); This patch fixes the build with CONFIG_ARM_PMU disabled. Cc: Christoffer Dall Cc: Marc Zyngier Signed-off-by: Sudeep Holla Signed-off-by: Christoffer Dall diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h index fe389ac..92e7e97 100644 --- a/include/kvm/arm_pmu.h +++ b/include/kvm/arm_pmu.h @@ -18,13 +18,13 @@ #ifndef __ASM_ARM_KVM_PMU_H #define __ASM_ARM_KVM_PMU_H -#ifdef CONFIG_KVM_ARM_PMU - #include #include #define ARMV8_PMU_CYCLE_IDX (ARMV8_PMU_MAX_COUNTERS - 1) +#ifdef CONFIG_KVM_ARM_PMU + struct kvm_pmc { u8 idx; /* index into the pmu->pmc array */ struct perf_event *perf_event; -- cgit v0.10.2 From 583248e6620a4726093295e2d6785fcbc2e86428 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Jun 2016 12:10:08 +0100 Subject: iommu/iova: Disable preemption around use of this_cpu_ptr() Between acquiring the this_cpu_ptr() and using it, ideally we don't want to be preempted and work on another CPU's private data. this_cpu_ptr() checks whether or not preemption is disable, and get_cpu_ptr() provides a convenient wrapper for operating on the cpu ptr inside a preemption disabled critical section (which currently is provided by the spinlock). [ 167.997877] BUG: using smp_processor_id() in preemptible [00000000] code: usb-storage/216 [ 167.997940] caller is debug_smp_processor_id+0x17/0x20 [ 167.997945] CPU: 7 PID: 216 Comm: usb-storage Tainted: G U 4.7.0-rc1-gfxbench-RO_Patchwork_1057+ #1 [ 167.997948] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 167.997951] 0000000000000000 ffff880118b7f9c8 ffffffff8140dca5 0000000000000007 [ 167.997958] ffffffff81a3a7e9 ffff880118b7f9f8 ffffffff8142a927 0000000000000000 [ 167.997965] ffff8800d499ed58 0000000000000001 00000000000fffff ffff880118b7fa08 [ 167.997971] Call Trace: [ 167.997977] [] dump_stack+0x67/0x92 [ 167.997981] [] check_preemption_disabled+0xd7/0xe0 [ 167.997985] [] debug_smp_processor_id+0x17/0x20 [ 167.997990] [] alloc_iova_fast+0xb7/0x210 [ 167.997994] [] intel_alloc_iova+0x7f/0xd0 [ 167.997998] [] intel_map_sg+0xbd/0x240 [ 167.998002] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998009] [] usb_hcd_map_urb_for_dma+0x4b9/0x5a0 [ 167.998013] [] usb_hcd_submit_urb+0xe9/0xaa0 [ 167.998017] [] ? mark_held_locks+0x6f/0xa0 [ 167.998022] [] ? __raw_spin_lock_init+0x1c/0x50 [ 167.998025] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998028] [] usb_submit_urb+0x3f3/0x5a0 [ 167.998032] [] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 167.998035] [] usb_sg_wait+0x67/0x150 [ 167.998039] [] usb_stor_bulk_transfer_sglist.part.3+0x82/0xd0 [ 167.998042] [] usb_stor_bulk_srb+0x4c/0x60 [ 167.998045] [] usb_stor_Bulk_transport+0x17e/0x420 [ 167.998049] [] usb_stor_invoke_transport+0x242/0x540 [ 167.998052] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998058] [] usb_stor_transparent_scsi_command+0x9/0x10 [ 167.998061] [] usb_stor_control_thread+0x158/0x260 [ 167.998064] [] ? fill_inquiry_response+0x20/0x20 [ 167.998067] [] ? fill_inquiry_response+0x20/0x20 [ 167.998071] [] kthread+0xea/0x100 [ 167.998078] [] ret_from_fork+0x1f/0x40 [ 167.998081] [] ? kthread_create_on_node+0x1f0/0x1f0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96293 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 9257b4a206fc ('iommu/iova: introduce per-cpu caching to iova allocation') Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index ba764a0..e23001b 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -420,8 +420,10 @@ retry: /* Try replenishing IOVAs by flushing rcache. */ flushed_rcache = true; + preempt_disable(); for_each_online_cpu(cpu) free_cpu_cached_iovas(cpu, iovad); + preempt_enable(); goto retry; } @@ -749,7 +751,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, bool can_insert = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_full(cpu_rcache->loaded)) { @@ -779,6 +781,7 @@ static bool __iova_rcache_insert(struct iova_domain *iovad, iova_magazine_push(cpu_rcache->loaded, iova_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); if (mag_to_free) { iova_magazine_free_pfns(mag_to_free, iovad); @@ -812,7 +815,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, bool has_pfn = false; unsigned long flags; - cpu_rcache = this_cpu_ptr(rcache->cpu_rcaches); + cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches); spin_lock_irqsave(&cpu_rcache->lock, flags); if (!iova_magazine_empty(cpu_rcache->loaded)) { @@ -834,6 +837,7 @@ static unsigned long __iova_rcache_get(struct iova_rcache *rcache, iova_pfn = iova_magazine_pop(cpu_rcache->loaded, limit_pfn); spin_unlock_irqrestore(&cpu_rcache->lock, flags); + put_cpu_ptr(rcache->cpu_rcaches); return iova_pfn; } -- cgit v0.10.2 From 591d215afcc2f94e8e2c69a63c924c044677eb31 Mon Sep 17 00:00:00 2001 From: James Morse Date: Wed, 8 Jun 2016 17:24:45 +0100 Subject: KVM: arm/arm64: Stop leaking vcpu pid references kvm provides kvm_vcpu_uninit(), which amongst other things, releases the last reference to the struct pid of the task that was last running the vcpu. On arm64 built with CONFIG_DEBUG_KMEMLEAK, starting a guest with kvmtool, then killing it with SIGKILL results (after some considerable time) in: > cat /sys/kernel/debug/kmemleak > unreferenced object 0xffff80007d5ea080 (size 128): > comm "lkvm", pid 2025, jiffies 4294942645 (age 1107.776s) > hex dump (first 32 bytes): > 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > backtrace: > [] create_object+0xfc/0x278 > [] kmemleak_alloc+0x34/0x70 > [] kmem_cache_alloc+0x16c/0x1d8 > [] alloc_pid+0x34/0x4d0 > [] copy_process.isra.6+0x79c/0x1338 > [] _do_fork+0x74/0x320 > [] SyS_clone+0x18/0x20 > [] el0_svc_naked+0x24/0x28 > [] 0xffffffffffffffff On x86 kvm_vcpu_uninit() is called on the path from kvm_arch_destroy_vm(), on arm no equivalent call is made. Add the call to kvm_arch_vcpu_free(). Signed-off-by: James Morse Fixes: 749cf76c5a36 ("KVM: ARM: Initial skeleton to compile KVM support") Cc: # 3.10+ Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 893941e..f1bde7c 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -263,6 +263,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) kvm_timer_vcpu_terminate(vcpu); kvm_vgic_vcpu_destroy(vcpu); kvm_pmu_vcpu_destroy(vcpu); + kvm_vcpu_uninit(vcpu); kmem_cache_free(kvm_vcpu_cache, vcpu); } -- cgit v0.10.2 From 3bd4f9112f87a9c65fe6e817272806167f0bc9ed Mon Sep 17 00:00:00 2001 From: Jan Niehusmann Date: Mon, 6 Jun 2016 14:20:11 +0200 Subject: iommu/vt-d: Fix overflow of iommu->domains array The valid range of 'did' in get_iommu_domain(*iommu, did) is 0..cap_ndoms(iommu->cap), so don't exceed that range in free_all_cpu_cached_iovas(). The user-visible impact of the out-of-bounds access is the machine hanging on suspend-to-ram. It is, in fact, a kernel panic, but due to already suspended devices, that's often not visible to the user. Fixes: 22e2f9fa63b0 ("iommu/vt-d: Use per-cpu IOVA caching") Signed-off-by: Jan Niehusmann Tested-By: Marius Vlad Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 1070094..cfe410e 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4607,7 +4607,7 @@ static void free_all_cpu_cached_iovas(unsigned int cpu) if (!iommu) continue; - for (did = 0; did < 0xffff; did++) { + for (did = 0; did < cap_ndoms(iommu->cap); did++) { domain = get_iommu_domain(iommu, did); if (!domain) -- cgit v0.10.2 From 6082ee72e9d89e80a664418be06f47d728243e85 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sun, 26 Jun 2016 10:33:29 +0200 Subject: iommu/amd: Initialize devid variable before using it Commit 2a0cb4e2d423 ("iommu/amd: Add new map for storing IVHD dev entry type HID") added a call to DUMP_printk in init_iommu_from_acpi() which used the value of devid before this variable was initialized. Fixes: 2a0cb4e2d423 ('iommu/amd: Add new map for storing IVHD dev entry type HID') Signed-off-by: Nicolas Iooss Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 9e00341..d091def 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1107,13 +1107,13 @@ static int __init init_iommu_from_acpi(struct amd_iommu *iommu, break; } + devid = e->devid; DUMP_printk(" DEV_ACPI_HID(%s[%s])\t\tdevid: %02x:%02x.%x\n", hid, uid, PCI_BUS_NUM(devid), PCI_SLOT(devid), PCI_FUNC(devid)); - devid = e->devid; flags = e->flags; ret = add_acpi_hid_device(hid, uid, &devid, false); -- cgit v0.10.2 From d20cb71dbf3487f24549ede1a8e2d67579b4632e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Jun 2016 13:14:36 -0400 Subject: make nfs_atomic_open() call d_drop() on all ->open_context() errors. In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Cc: stable@vger.kernel.org # v3.10+ Tested-by: Oleg Drokin Signed-off-by: Al Viro Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 2817cce..d8015a0 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1539,9 +1539,9 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, err = PTR_ERR(inode); trace_nfs_atomic_open_exit(dir, ctx, open_flags, err); put_nfs_open_context(ctx); + d_drop(dentry); switch (err) { case -ENOENT: - d_drop(dentry); d_add(dentry, NULL); nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); break; -- cgit v0.10.2 From 749d088b8e7f4b9826ede02b9a043e417fa84aa1 Mon Sep 17 00:00:00 2001 From: Minfei Huang Date: Fri, 27 May 2016 14:17:10 +0800 Subject: pvclock: Add CPU barriers to get correct version value Protocol for the "version" fields is: hypervisor raises it (making it uneven) before it starts updating the fields and raises it again (making it even) when it is done. Thus the guest can make sure the time values it got are consistent by checking the version before and after reading them. Add CPU barries after getting version value just like what function vread_pvclock does, because all of callees in this function is inline. Fixes: 502dfeff239e8313bfbe906ca0a1a6827ac8481b Cc: stable@vger.kernel.org Signed-off-by: Minfei Huang Signed-off-by: Paolo Bonzini diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index fdcc040..538ae94 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -85,6 +85,8 @@ unsigned __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src, u8 ret_flags; version = src->version; + /* Make the latest version visible */ + smp_rmb(); offset = pvclock_get_nsec_offset(src); ret = src->system_time + offset; diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 99bfc02..7f82fe0 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -66,6 +66,8 @@ u8 pvclock_read_flags(struct pvclock_vcpu_time_info *src) do { version = __pvclock_read_cycles(src, &ret, &flags); + /* Make sure that the version double-check is last. */ + smp_rmb(); } while ((src->version & 1) || version != src->version); return flags & valid_flags; @@ -80,6 +82,8 @@ cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) do { version = __pvclock_read_cycles(src, &ret, &flags); + /* Make sure that the version double-check is last. */ + smp_rmb(); } while ((src->version & 1) || version != src->version); if (unlikely((flags & PVCLOCK_GUEST_STOPPED) != 0)) { -- cgit v0.10.2 From f7550d076d55c1b5f02f95012e3a5a84d264c47d Mon Sep 17 00:00:00 2001 From: Minfei Huang Date: Fri, 27 May 2016 14:17:11 +0800 Subject: pvclock: Cleanup to remove function pvclock_get_nsec_offset Function __pvclock_read_cycles is short enough, so there is no need to have another function pvclock_get_nsec_offset to calculate tsc delta. It's better to combine it into function __pvclock_read_cycles. Remove useless variables in function __pvclock_read_cycles. Signed-off-by: Minfei Huang Signed-off-by: Paolo Bonzini diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 538ae94..7c1c895 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -69,31 +69,22 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) } static __always_inline -u64 pvclock_get_nsec_offset(const struct pvclock_vcpu_time_info *src) -{ - u64 delta = rdtsc_ordered() - src->tsc_timestamp; - return pvclock_scale_delta(delta, src->tsc_to_system_mul, - src->tsc_shift); -} - -static __always_inline unsigned __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src, cycle_t *cycles, u8 *flags) { unsigned version; - cycle_t ret, offset; - u8 ret_flags; + cycle_t offset; + u64 delta; version = src->version; /* Make the latest version visible */ smp_rmb(); - offset = pvclock_get_nsec_offset(src); - ret = src->system_time + offset; - ret_flags = src->flags; - - *cycles = ret; - *flags = ret_flags; + delta = rdtsc_ordered() - src->tsc_timestamp; + offset = pvclock_scale_delta(delta, src->tsc_to_system_mul, + src->tsc_shift); + *cycles = src->system_time + offset; + *flags = src->flags; return version; } -- cgit v0.10.2 From ed911b43adb889c37a37fa57a995f0b460c633b6 Mon Sep 17 00:00:00 2001 From: Minfei Huang Date: Sat, 28 May 2016 20:27:43 +0800 Subject: pvclock: Get rid of __pvclock_read_cycles in function pvclock_read_flags There is a generic function __pvclock_read_cycles to be used to get both flags and cycles. For function pvclock_read_flags, it's useless to get cycles value. To make this function be more effective, get this variable flags directly in function. Signed-off-by: Minfei Huang Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 7f82fe0..06c58ce 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -61,11 +61,14 @@ void pvclock_resume(void) u8 pvclock_read_flags(struct pvclock_vcpu_time_info *src) { unsigned version; - cycle_t ret; u8 flags; do { - version = __pvclock_read_cycles(src, &ret, &flags); + version = src->version; + /* Make the latest version visible */ + smp_rmb(); + + flags = src->flags; /* Make sure that the version double-check is last. */ smp_rmb(); } while ((src->version & 1) || version != src->version); -- cgit v0.10.2 From 8d93c874ac899bfdf0ad3787baef684a0c878c2c Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 20 Jun 2016 22:28:02 -0300 Subject: KVM: x86: move nsec_to_cycles from x86.c to x86.h Move the inline function nsec_to_cycles from x86.c to x86.h, as the next patch uses it from lapic.c. Signed-off-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 902d9da..7da5dd2 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1244,12 +1244,6 @@ static atomic_t kvm_guest_has_master_clock = ATOMIC_INIT(0); static DEFINE_PER_CPU(unsigned long, cpu_tsc_khz); static unsigned long max_tsc_khz; -static inline u64 nsec_to_cycles(struct kvm_vcpu *vcpu, u64 nsec) -{ - return pvclock_scale_delta(nsec, vcpu->arch.virtual_tsc_mult, - vcpu->arch.virtual_tsc_shift); -} - static u32 adjust_tsc_khz(u32 khz, s32 ppm) { u64 v = (u64)khz * (1000000 + ppm); diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h index 7ce3634..a82ca46 100644 --- a/arch/x86/kvm/x86.h +++ b/arch/x86/kvm/x86.h @@ -2,6 +2,7 @@ #define ARCH_X86_KVM_X86_H #include +#include #include "kvm_cache_regs.h" #define MSR_IA32_CR_PAT_DEFAULT 0x0007040600070406ULL @@ -195,6 +196,12 @@ extern unsigned int lapic_timer_advance_ns; extern struct static_key kvm_no_apic_vcpu; +static inline u64 nsec_to_cycles(struct kvm_vcpu *vcpu, u64 nsec) +{ + return pvclock_scale_delta(nsec, vcpu->arch.virtual_tsc_mult, + vcpu->arch.virtual_tsc_shift); +} + /* Same "calling convention" as do_div: * - divide (n << 32) by base * - put result in n -- cgit v0.10.2 From b606f189c7d5bf9b875bba168162fe05287880fe Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 20 Jun 2016 22:33:48 -0300 Subject: KVM: LAPIC: cap __delay at lapic_timer_advance_ns The host timer which emulates the guest LAPIC TSC deadline timer has its expiration diminished by lapic_timer_advance_ns nanoseconds. Therefore if, at wait_lapic_expire, a difference larger than lapic_timer_advance_ns is encountered, delay at most lapic_timer_advance_ns. This fixes a problem where the guest can cause the host to delay for large amounts of time. Reported-by: Alan Jenkins Signed-off-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index bbb5b28..a397200 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1310,7 +1310,8 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu) /* __delay is delay_tsc whenever the hardware has TSC, thus always. */ if (guest_tsc < tsc_deadline) - __delay(tsc_deadline - guest_tsc); + __delay(min(tsc_deadline - guest_tsc, + nsec_to_cycles(vcpu, lapic_timer_advance_ns))); } static void start_apic_timer(struct kvm_lapic *apic) -- cgit v0.10.2 From ff30ef40deca4658e27b0c596e7baf39115e858f Mon Sep 17 00:00:00 2001 From: Quentin Casasnovas Date: Sat, 18 Jun 2016 11:01:05 +0200 Subject: KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I couldn't get Xen to boot a L2 HVM when it was nested under KVM - it was getting a GP(0) on a rather unspecial vmread from Xen: (XEN) ----[ Xen-4.7.0-rc x86_64 debug=n Not tainted ]---- (XEN) CPU: 1 (XEN) RIP: e008:[] vmx_get_segment_register+0x14e/0x450 (XEN) RFLAGS: 0000000000010202 CONTEXT: hypervisor (d1v0) (XEN) rax: ffff82d0801e6288 rbx: ffff83003ffbfb7c rcx: fffffffffffab928 (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: ffff83000bdd0000 (XEN) rbp: ffff83000bdd0000 rsp: ffff83003ffbfab0 r8: ffff830038813910 (XEN) r9: ffff83003faf3958 r10: 0000000a3b9f7640 r11: ffff83003f82d418 (XEN) r12: 0000000000000000 r13: ffff83003ffbffff r14: 0000000000004802 (XEN) r15: 0000000000000008 cr0: 0000000080050033 cr4: 00000000001526e0 (XEN) cr3: 000000003fc79000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen code around (vmx_get_segment_register+0x14e/0x450): (XEN) 00 00 41 be 02 48 00 00 <44> 0f 78 74 24 08 0f 86 38 56 00 00 b8 08 68 00 (XEN) Xen stack trace from rsp=ffff83003ffbfab0: ... (XEN) Xen call trace: (XEN) [] vmx_get_segment_register+0x14e/0x450 (XEN) [] get_page_from_gfn_p2m+0x165/0x300 (XEN) [] hvmemul_get_seg_reg+0x52/0x60 (XEN) [] hvm_emulate_prepare+0x53/0x70 (XEN) [] handle_mmio+0x2b/0xd0 (XEN) [] emulate.c#_hvm_emulate_one+0x111/0x2c0 (XEN) [] handle_hvm_io_completion+0x274/0x2a0 (XEN) [] __get_gfn_type_access+0xfa/0x270 (XEN) [] timer.c#add_entry+0x4b/0xb0 (XEN) [] timer.c#remove_entry+0x7c/0x90 (XEN) [] hvm_do_resume+0x23/0x140 (XEN) [] vmx_do_resume+0xa7/0x140 (XEN) [] context_switch+0x13b/0xe40 (XEN) [] schedule.c#schedule+0x22e/0x570 (XEN) [] softirq.c#__do_softirq+0x5c/0x90 (XEN) [] domain.c#idle_loop+0x25/0x50 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 1: (XEN) GENERAL PROTECTION FAULT (XEN) [error_code=0000] (XEN) **************************************** Tracing my host KVM showed it was the one injecting the GP(0) when emulating the VMREAD and checking the destination segment permissions in get_vmx_mem_address(): 3) | vmx_handle_exit() { 3) | handle_vmread() { 3) | nested_vmx_check_permission() { 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.065 us | vmx_read_guest_seg_selector(); 3) 0.066 us | vmx_read_guest_seg_ar(); 3) 1.636 us | } 3) 0.058 us | vmx_get_rflags(); 3) 0.062 us | vmx_read_guest_seg_ar(); 3) 3.469 us | } 3) | vmx_get_cs_db_l_bits() { 3) 0.058 us | vmx_read_guest_seg_ar(); 3) 0.662 us | } 3) | get_vmx_mem_address() { 3) 0.068 us | vmx_cache_reg(); 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.068 us | vmx_read_guest_seg_selector(); 3) 0.071 us | vmx_read_guest_seg_ar(); 3) 1.756 us | } 3) | kvm_queue_exception_e() { 3) 0.066 us | kvm_multiple_exception(); 3) 0.684 us | } 3) 4.085 us | } 3) 9.833 us | } 3) + 10.366 us | } Cross-checking the KVM/VMX VMREAD emulation code with the Intel Software Developper Manual Volume 3C - "VMREAD - Read Field from Virtual-Machine Control Structure", I found that we're enforcing that the destination operand is NOT located in a read-only data segment or any code segment when the L1 is in long mode - BUT that check should only happen when it is in protected mode. Shuffling the code a bit to make our emulation follow the specification allows me to boot a Xen dom0 in a nested KVM and start HVM L2 guests without problems. Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Signed-off-by: Quentin Casasnovas Cc: Eugene Korenevsky Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Thomas Gleixner Cc: Ingo Molnar Cc: H. Peter Anvin Cc: linux-stable Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 003618e..64a79f2 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6671,7 +6671,13 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu, /* Checks for #GP/#SS exceptions. */ exn = false; - if (is_protmode(vcpu)) { + if (is_long_mode(vcpu)) { + /* Long mode: #GP(0)/#SS(0) if the memory address is in a + * non-canonical form. This is the only check on the memory + * destination for long mode! + */ + exn = is_noncanonical_address(*ret); + } else if (is_protmode(vcpu)) { /* Protected mode: apply checks for segment validity in the * following order: * - segment type check (#GP(0) may be thrown) @@ -6688,17 +6694,10 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu, * execute-only code segment */ exn = ((s.type & 0xa) == 8); - } - if (exn) { - kvm_queue_exception_e(vcpu, GP_VECTOR, 0); - return 1; - } - if (is_long_mode(vcpu)) { - /* Long mode: #GP(0)/#SS(0) if the memory address is in a - * non-canonical form. This is an only check for long mode. - */ - exn = is_noncanonical_address(*ret); - } else if (is_protmode(vcpu)) { + if (exn) { + kvm_queue_exception_e(vcpu, GP_VECTOR, 0); + return 1; + } /* Protected mode: #GP(0)/#SS(0) if the segment is unusable. */ exn = (s.unusable != 0); -- cgit v0.10.2 From 48f1dcb55a7d29aeb8965c567660c14d0dfd1a42 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 23 Jun 2016 15:25:09 +0200 Subject: ipv6: enforce egress device match in per table nexthop lookups with the commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups"), net hop lookup is first performed on route creation in the passed-in table. However device match is not enforced in table lookup, so the found route can be later discarded due to egress device mismatch and no global lookup will be performed. This cause the following to fail: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dummy1 up ip link set dummy2 up ip route add 2001:db8:8086::/48 dev dummy1 metric 20 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy1 metric 20 ip route add 2001:db8:8086::/48 dev dummy2 metric 21 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy2 metric 21 RTNETLINK answers: No route to host This change fixes the issue enforcing device lookup in ip6_nh_lookup_table() v1->v2: updated commit message title Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Reported-and-tested-by: Beniamino Galvani Signed-off-by: Paolo Abeni Acked-by: David Ahern Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 969913d..520b788 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1782,7 +1782,7 @@ static struct rt6_info *ip6_nh_lookup_table(struct net *net, }; struct fib6_table *table; struct rt6_info *rt; - int flags = 0; + int flags = RT6_LOOKUP_F_IFACE; table = fib6_get_table(net, cfg->fc_table); if (!table) -- cgit v0.10.2 From 4192f672fae559f32d82de72a677701853cc98a7 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Thu, 23 Jun 2016 16:28:58 +0100 Subject: vsock: make listener child lock ordering explicit There are several places where the listener and pending or accept queue child sockets are accessed at the same time. Lockdep is unhappy that two locks from the same class are held. Tell lockdep that it is safe and document the lock ordering. Originally Claudio Imbrenda sent a similar patch asking whether this is safe. I have audited the code and also covered the vsock_pending_work() function. Suggested-by: Claudio Imbrenda Signed-off-by: Stefan Hajnoczi Signed-off-by: David S. Miller diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index b5f1221..b96ac91 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -61,6 +61,14 @@ * function will also cleanup rejected sockets, those that reach the connected * state but leave it before they have been accepted. * + * - Lock ordering for pending or accept queue sockets is: + * + * lock_sock(listener); + * lock_sock_nested(pending, SINGLE_DEPTH_NESTING); + * + * Using explicit nested locking keeps lockdep happy since normally only one + * lock of a given class may be taken at a time. + * * - Sockets created by user action will be cleaned up when the user process * calls close(2), causing our release implementation to be called. Our release * implementation will perform some cleanup then drop the last reference so our @@ -443,7 +451,7 @@ void vsock_pending_work(struct work_struct *work) cleanup = true; lock_sock(listener); - lock_sock(sk); + lock_sock_nested(sk, SINGLE_DEPTH_NESTING); if (vsock_is_pending(sk)) { vsock_remove_pending(listener, sk); @@ -1292,7 +1300,7 @@ static int vsock_accept(struct socket *sock, struct socket *newsock, int flags) if (connected) { listener->sk_ack_backlog--; - lock_sock(connected); + lock_sock_nested(connected, SINGLE_DEPTH_NESTING); vconnected = vsock_sk(connected); /* If the listener socket has received an error, then we should -- cgit v0.10.2 From ab2a4bf83902c170d29ba130a8abb5f9d90559e1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Jun 2016 10:23:10 -0400 Subject: USB: don't free bandwidth_mutex too early The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern Reported-by: Chung-Geol Kim Tested-by: Chung-Geol Kim CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 34b837a..d2e3f65 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2598,26 +2598,23 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is * deallocated. * - * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for either hcd in a peer set - * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to - * block new peering attempts + * Make sure to deallocate the bandwidth_mutex only when the last HCD is + * freed. When hcd_release() is called for either hcd in a peer set, + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers. */ static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); mutex_lock(&usb_port_peer_mutex); - if (usb_hcd_is_primary_hcd(hcd)) { - kfree(hcd->address0_mutex); - kfree(hcd->bandwidth_mutex); - } if (hcd->shared_hcd) { struct usb_hcd *peer = hcd->shared_hcd; peer->shared_hcd = NULL; - if (peer->primary_hcd == hcd) - peer->primary_hcd = NULL; + peer->primary_hcd = NULL; + } else { + kfree(hcd->address0_mutex); + kfree(hcd->bandwidth_mutex); } mutex_unlock(&usb_port_peer_mutex); kfree(hcd); -- cgit v0.10.2 From 023954351fae0e34ba247cff4d798c98290b20a4 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 23 Jun 2016 16:54:46 -0500 Subject: dax: fix offset overflow in dax_io This isn't functionally apparent for some reason, but when we test io at extreme offsets at the end of the loff_t rang, such as in fstests xfs/071, the calculation of "max" in dax_io() can be wrong due to pos + size overflowing. For example, # xfs_io -c "pwrite 9223372036854771712 512" /mnt/test/file enters dax_io with: start 0x7ffffffffffff000 end 0x7ffffffffffff200 and the rounded up "size" variable is 0x1000. This yields: pos + size 0x8000000000000000 (overflows loff_t) end 0x7ffffffffffff200 Due to the overflow, the min() function picks the wrong value for the "max" variable, and when we send (max - pos) into i.e. copy_from_iter_pmem() it is also the wrong value. This somehow(tm) gets magically absorbed without incident, probably because iter->count is correct. But it seems best to fix it up properly by comparing the two values as unsigned. Signed-off-by: Eric Sandeen Signed-off-by: Dan Williams diff --git a/fs/dax.c b/fs/dax.c index 761495b..e207f8f 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -208,7 +208,12 @@ static ssize_t dax_io(struct inode *inode, struct iov_iter *iter, dax.addr += first; size = map_len - first; } - max = min(pos + size, end); + /* + * pos + size is one past the last offset for IO, + * so pos + size can overflow loff_t at extreme offsets. + * Cast to u64 to catch this and get the true minimum. + */ + max = min_t(u64, pos + size, end); } if (iov_iter_rw(iter) == WRITE) { -- cgit v0.10.2 From 9c6795a9b3cbb56a9fbfaf43909c5c22999ba317 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 27 Jun 2016 21:06:51 +0200 Subject: ALSA: echoaudio: Fix memory allocation 'commpage_bak' is allocated with 'sizeof(struct echoaudio)' bytes. We then copy 'sizeof(struct comm_page)' bytes in it. On my system, smatch complains because one is 2960 and the other is 3072. This would result in memory corruption or a oops. Signed-off-by: Christophe JAILLET Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c index 1cb85ae..286f5e3 100644 --- a/sound/pci/echoaudio/echoaudio.c +++ b/sound/pci/echoaudio/echoaudio.c @@ -2200,11 +2200,11 @@ static int snd_echo_resume(struct device *dev) u32 pipe_alloc_mask; int err; - commpage_bak = kmalloc(sizeof(struct echoaudio), GFP_KERNEL); + commpage_bak = kmalloc(sizeof(*commpage), GFP_KERNEL); if (commpage_bak == NULL) return -ENOMEM; commpage = chip->comm_page; - memcpy(commpage_bak, commpage, sizeof(struct comm_page)); + memcpy(commpage_bak, commpage, sizeof(*commpage)); err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device); if (err < 0) { -- cgit v0.10.2 From 5ab666e09541e64ce2fd73411c3b5b9e4ad334b1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 27 Jun 2016 23:47:15 +0200 Subject: intel_pstate: Do not clear utilization update hooks on policy changes intel_pstate_set_policy() is invoked by the cpufreq core during driver initialization, on changes of policy attributes (minimim and maximum frequency, for example) via sysfs and via CPU notifications from the platform firmware. On some platforms the latter may occur relatively often. Commit bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) made intel_pstate_set_policy() clear the CPU's utilization update hook before updating the policy attributes for it (and set the hook again after doind that), but that involves invoking synchronize_sched() and adds overhead to the CPU notifications mentioned above and to the sched-RCU handling in general. That extra overhead is arguably not necessary, because updating policy attributes when the CPU's utilization update hook is active should not lead to any adverse effects, so drop the clearing of the hook from intel_pstate_set_policy() and make it check if the hook has been set already when attempting to set it. Fixes: bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) Reported-by: Jisheng Zhang Tested-by: Jisheng Zhang Tested-by: Doug Smythies Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index fe9dc17..1fa1a32 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1400,6 +1400,9 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) { struct cpudata *cpu = all_cpu_data[cpu_num]; + if (cpu->update_util_set) + return; + /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, @@ -1440,8 +1443,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) if (!policy->cpuinfo.max_freq) return -ENODEV; - intel_pstate_clear_update_util_hook(policy->cpu); - pr_debug("set_policy cpuinfo.max %u policy->max %u\n", policy->cpuinfo.max_freq, policy->max); -- cgit v0.10.2 From ca5eda5d3db6026080cff267459625c87c43e9ab Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 27 Jun 2016 14:50:13 +0900 Subject: cpufreq: dt: call of_node_put() before error out If of_match_node() fails, this init function bails out without calling of_node_put(). Also change of_node_put(of_root) to of_node_put(np); both of them hold the same pointer, but it seems better to call of_node_put() against the node returned by of_find_node_by_path(). Signed-off-by: Masahiro Yamada Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 3646b14..0bb44d5 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -79,15 +79,16 @@ static const struct of_device_id machines[] __initconst = { static int __init cpufreq_dt_platdev_init(void) { struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; if (!np) return -ENODEV; - if (!of_match_node(machines, np)) + match = of_match_node(machines, np); + of_node_put(np); + if (!match) return -ENODEV; - of_node_put(of_root); - return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1, NULL, 0)); } -- cgit v0.10.2 From 742c87bf27d3b715820da6f8a81d6357adbf18f8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 28 Jun 2016 03:29:29 +0200 Subject: cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy() CPU notifications from the firmware coming in when cpufreq is suspended cause cpufreq_update_current_freq() to return 0 which triggers the WARN_ON() in cpufreq_update_policy() for no reason. Avoid that by checking cpufreq_suspended before calling cpufreq_update_current_freq(). Fixes: c9d9c929e674 (cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set) Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar Cc: 4.6+ # 4.6+ diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9009295..5617c70 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2261,6 +2261,10 @@ int cpufreq_update_policy(unsigned int cpu) * -> ask driver for current freq and notify governors about a change */ if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { + if (cpufreq_suspended) { + ret = -EAGAIN; + goto unlock; + } new_policy.cur = cpufreq_update_current_freq(policy); if (WARN_ON(!new_policy.cur)) { ret = -EIO; -- cgit v0.10.2 From f52e126cc7476196f44f3c313b7d9f0699a881fc Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 28 Jun 2016 09:42:25 +0530 Subject: ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame) With recent binutils update to support dwarf CFI pseudo-ops in gas, we now get .eh_frame vs. .debug_frame. Although the call frame info is exactly the same in both, the CIE differs, which the current kernel unwinder can't cope with. This broke both the kernel unwinder as well as loadable modules (latter because of a new unhandled relo R_ARC_32_PCREL from .rela.eh_frame in the module loader) The ideal solution would be to switch unwinder to .eh_frame. For now however we can make do by just ensureing .debug_frame is generated by removing -fasynchronous-unwind-tables .eh_frame generated with -gdwarf-2 -fasynchronous-unwind-tables .debug_frame generated with -gdwarf-2 Fixes STAR 9001058196 Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/Makefile b/arch/arc/Makefile index d4df6be..85814e7 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -66,8 +66,6 @@ endif endif -cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables - # By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok ifeq ($(atleast_gcc48),y) cflags-$(CONFIG_ARC_DW2_UNWIND) += -gdwarf-2 -- cgit v0.10.2 From 9bd54517ee86cb164c734f72ea95aeba4804f10b Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 23 Jun 2016 11:00:39 +0300 Subject: arc: unwind: warn only once if DW2_UNWIND is disabled If CONFIG_ARC_DW2_UNWIND is disabled every time arc_unwind_core() gets called following message gets printed in debug console: ----------------->8--------------- CONFIG_ARC_DW2_UNWIND needs to be enabled ----------------->8--------------- That message makes sense if user indeed wants to see a backtrace or get nice function call-graphs in perf but what if user disabled unwinder for the purpose? Why pollute his debug console? So instead we'll warn user about possibly missing feature once and let him decide if that was what he or she really wanted. Signed-off-by: Alexey Brodkin Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c index e0efff1..b9192a6 100644 --- a/arch/arc/kernel/stacktrace.c +++ b/arch/arc/kernel/stacktrace.c @@ -142,7 +142,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs, * prelogue is setup (callee regs saved and then fp set and not other * way around */ - pr_warn("CONFIG_ARC_DW2_UNWIND needs to be enabled\n"); + pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n"); return 0; #endif -- cgit v0.10.2 From 5419447e2142d6ed68c9f5c1a28630b3a290a845 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 13 Jun 2016 17:03:48 +0200 Subject: Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL" This reverts commit 852ffd0f4e23248b47531058e531066a988434b5. There are use cases where an intermediate boot kernel (1) uses kexec to boot the final production kernel (2). For this scenario we should provide the original boot information to the production kernel (2). Therefore clearing the boot information during kexec() should not be done. Cc: stable@vger.kernel.org # v3.17+ Reported-by: Steffen Maier Signed-off-by: Michael Holzheu Reviewed-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index f20abdb..d14069d 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2064,12 +2064,5 @@ void s390_reset_system(void) S390_lowcore.program_new_psw.addr = (unsigned long) s390_base_pgm_handler; - /* - * Clear subchannel ID and number to signal new kernel that no CCW or - * SCSI IPL has been done (for kexec and kdump) - */ - S390_lowcore.subchannel_id = 0; - S390_lowcore.subchannel_nr = 0; - do_reset_calls(); } -- cgit v0.10.2 From bcf4dd5f9ee096bd1510f838dd4750c35df4e38b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 27 Jun 2016 17:06:45 +0200 Subject: s390: fix test_fp_ctl inline assembly contraints The test_fp_ctl function is used to test if a given value is a valid floating-point control. The inline assembly in test_fp_ctl uses an incorrect constraint for the 'orig_fpc' variable. If the compiler chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl() function always returns true. This allows user space to trigger kernel oopses with invalid floating-point control values on the signal stack. This problem has been introduced with git commit 4725c86055f5bbdcdf "s390: fix save and restore of the floating-point-control register" Cc: stable@vger.kernel.org # v3.13+ Reviewed-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/fpu/api.h b/arch/s390/include/asm/fpu/api.h index 5e04f3c..8ae236b0 100644 --- a/arch/s390/include/asm/fpu/api.h +++ b/arch/s390/include/asm/fpu/api.h @@ -22,7 +22,7 @@ static inline int test_fp_ctl(u32 fpc) " la %0,0\n" "1:\n" EX_TABLE(0b,1b) - : "=d" (rc), "=d" (orig_fpc) + : "=d" (rc), "=&d" (orig_fpc) : "d" (fpc), "0" (-EINVAL)); return rc; } -- cgit v0.10.2 From 70a0dec45174c976c64b4c8c1d0898581f759948 Mon Sep 17 00:00:00 2001 From: Tom Goff Date: Thu, 23 Jun 2016 16:11:57 -0400 Subject: ipmr/ip6mr: Initialize the last assert time of mfc entries. This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by: Tom Goff Signed-off-by: David S. Miller diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 21a38e2..5ad48ec 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -891,8 +891,10 @@ static struct mfc_cache *ipmr_cache_alloc(void) { struct mfc_cache *c = kmem_cache_zalloc(mrt_cachep, GFP_KERNEL); - if (c) + if (c) { + c->mfc_un.res.last_assert = jiffies - MFC_ASSERT_THRESH - 1; c->mfc_un.res.minvif = MAXVIFS; + } return c; } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index f2e2013f8..487ef3b 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1074,6 +1074,7 @@ static struct mfc6_cache *ip6mr_cache_alloc(void) struct mfc6_cache *c = kmem_cache_zalloc(mrt_cachep, GFP_KERNEL); if (!c) return NULL; + c->mfc_un.res.last_assert = jiffies - MFC_ASSERT_THRESH - 1; c->mfc_un.res.minvif = MAXMIFS; return c; } -- cgit v0.10.2 From 0622cab0341cac6b30da177b0faa39fae0680e71 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 23 Jun 2016 14:20:51 -0700 Subject: bonding: fix 802.3ad aggregator reselection Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index b9304a2..ca81f46 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -657,6 +657,20 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) } } +static int __agg_active_ports(struct aggregator *agg) +{ + struct port *port; + int active = 0; + + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (port->is_enabled) + active++; + } + + return active; +} + /** * __get_agg_bandwidth - get the total bandwidth of an aggregator * @aggregator: the aggregator we're looking at @@ -664,39 +678,40 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) */ static u32 __get_agg_bandwidth(struct aggregator *aggregator) { + int nports = __agg_active_ports(aggregator); u32 bandwidth = 0; - if (aggregator->num_of_ports) { + if (nports) { switch (__get_link_speed(aggregator->lag_ports)) { case AD_LINK_SPEED_1MBPS: - bandwidth = aggregator->num_of_ports; + bandwidth = nports; break; case AD_LINK_SPEED_10MBPS: - bandwidth = aggregator->num_of_ports * 10; + bandwidth = nports * 10; break; case AD_LINK_SPEED_100MBPS: - bandwidth = aggregator->num_of_ports * 100; + bandwidth = nports * 100; break; case AD_LINK_SPEED_1000MBPS: - bandwidth = aggregator->num_of_ports * 1000; + bandwidth = nports * 1000; break; case AD_LINK_SPEED_2500MBPS: - bandwidth = aggregator->num_of_ports * 2500; + bandwidth = nports * 2500; break; case AD_LINK_SPEED_10000MBPS: - bandwidth = aggregator->num_of_ports * 10000; + bandwidth = nports * 10000; break; case AD_LINK_SPEED_20000MBPS: - bandwidth = aggregator->num_of_ports * 20000; + bandwidth = nports * 20000; break; case AD_LINK_SPEED_40000MBPS: - bandwidth = aggregator->num_of_ports * 40000; + bandwidth = nports * 40000; break; case AD_LINK_SPEED_56000MBPS: - bandwidth = aggregator->num_of_ports * 56000; + bandwidth = nports * 56000; break; case AD_LINK_SPEED_100000MBPS: - bandwidth = aggregator->num_of_ports * 100000; + bandwidth = nports * 100000; break; default: bandwidth = 0; /* to silence the compiler */ @@ -1530,10 +1545,10 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, switch (__get_agg_selection_mode(curr->lag_ports)) { case BOND_AD_COUNT: - if (curr->num_of_ports > best->num_of_ports) + if (__agg_active_ports(curr) > __agg_active_ports(best)) return curr; - if (curr->num_of_ports < best->num_of_ports) + if (__agg_active_ports(curr) < __agg_active_ports(best)) return best; /*FALLTHROUGH*/ @@ -1561,8 +1576,14 @@ static int agg_device_up(const struct aggregator *agg) if (!port) return 0; - return netif_running(port->slave->dev) && - netif_carrier_ok(port->slave->dev); + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev)) + return 1; + } + + return 0; } /** @@ -1610,7 +1631,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, agg->is_active = 0; - if (agg->num_of_ports && agg_device_up(agg)) + if (__agg_active_ports(agg) && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } @@ -1622,7 +1643,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, * answering partner. */ if (active && active->lag_ports && - active->lag_ports->is_enabled && + __agg_active_ports(active) && (__agg_has_partner(active) || (!__agg_has_partner(active) && !__agg_has_partner(best)))) { @@ -2133,7 +2154,7 @@ void bond_3ad_unbind_slave(struct slave *slave) else temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; temp_aggregator->num_of_ports--; - if (temp_aggregator->num_of_ports == 0) { + if (__agg_active_ports(temp_aggregator) == 0) { select_new_active_agg = temp_aggregator->is_active; ad_clear_agg(temp_aggregator); if (select_new_active_agg) { @@ -2432,7 +2453,9 @@ void bond_3ad_adapter_speed_duplex_changed(struct slave *slave) */ void bond_3ad_handle_link_change(struct slave *slave, char link) { + struct aggregator *agg; struct port *port; + bool dummy; port = &(SLAVE_AD_INFO(slave)->port); @@ -2459,6 +2482,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) port->is_enabled = false; ad_update_actor_keys(port, true); } + agg = __get_first_agg(port); + ad_agg_selection_logic(agg, &dummy); + netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n", port->actor_port_number, link == BOND_LINK_UP ? "UP" : "DOWN"); @@ -2499,7 +2525,7 @@ int bond_3ad_set_carrier(struct bonding *bond) active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator)); if (active) { /* are enough slaves available to consider link up? */ - if (active->num_of_ports < bond->params.min_links) { + if (__agg_active_ports(active) < bond->params.min_links) { if (netif_carrier_ok(bond->dev)) { netif_carrier_off(bond->dev); goto out; -- cgit v0.10.2 From d2b13233879ca1268a1c027d4573109e5a777811 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:23:12 -0700 Subject: net: bgmac: Fix SOF bit checking We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index ee5f431..70926c6 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -267,15 +267,16 @@ static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) while (ring->start != ring->end) { int slot_idx = ring->start % BGMAC_TX_RING_SLOTS; struct bgmac_slot_info *slot = &ring->slots[slot_idx]; - u32 ctl1; + u32 ctl0, ctl1; int len; if (slot_idx == empty_slot) break; + ctl0 = le32_to_cpu(ring->cpu_base[slot_idx].ctl0); ctl1 = le32_to_cpu(ring->cpu_base[slot_idx].ctl1); len = ctl1 & BGMAC_DESC_CTL1_LEN; - if (ctl1 & BGMAC_DESC_CTL0_SOF) + if (ctl0 & BGMAC_DESC_CTL0_SOF) /* Unmap no longer used buffer */ dma_unmap_single(dma_dev, slot->dma_addr, len, DMA_TO_DEVICE); -- cgit v0.10.2 From c3897f2a69e54dd113fc9abd2daf872e5b495798 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:32 -0700 Subject: net: bgmac: Start transmit queue in bgmac_open The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 70926c6..85cd07f 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1314,6 +1314,9 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); netif_carrier_on(net_dev); + + netif_start_queue(net_dev); + return 0; } -- cgit v0.10.2 From 3894396e64994f31c3ef5c7e6f63dded0593e567 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Jun 2016 14:25:33 -0700 Subject: net: bgmac: Remove superflous netif_carrier_on() bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 85cd07f..a6333d3 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1313,8 +1313,6 @@ static int bgmac_open(struct net_device *net_dev) phy_start(bgmac->phy_dev); - netif_carrier_on(net_dev); - netif_start_queue(net_dev); return 0; -- cgit v0.10.2 From f299a02d5f13c4deb52c1a7ddf2b42630fe6294a Mon Sep 17 00:00:00 2001 From: Wang Sheng-Hui Date: Fri, 24 Jun 2016 08:52:11 +0800 Subject: net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_create Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui Acked-By: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/wq.c b/drivers/net/ethernet/mellanox/mlx5/core/wq.c index ce21ee5..821a087 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/wq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/wq.c @@ -75,14 +75,14 @@ int mlx5_wq_cyc_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_wq_cyc_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -111,14 +111,14 @@ int mlx5_cqwq_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } err = mlx5_buf_alloc_node(mdev, mlx5_cqwq_get_byte_size(wq), &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } @@ -148,13 +148,14 @@ int mlx5_wq_ll_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_db_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_db_alloc_node() failed, %d\n", err); return err; } - err = mlx5_buf_alloc(mdev, mlx5_wq_ll_get_byte_size(wq), &wq_ctrl->buf); + err = mlx5_buf_alloc_node(mdev, mlx5_wq_ll_get_byte_size(wq), + &wq_ctrl->buf, param->buf_numa_node); if (err) { - mlx5_core_warn(mdev, "mlx5_buf_alloc() failed, %d\n", err); + mlx5_core_warn(mdev, "mlx5_buf_alloc_node() failed, %d\n", err); goto err_db_free; } -- cgit v0.10.2 From 126e7557328a1cd576be4fca95b133a2695283ff Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 19 Jun 2016 23:51:02 +0300 Subject: mac80211: Fix mesh estab_plinks counting in STA removal case If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 21b1fdf..6a1603b 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -148,14 +148,17 @@ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) void mesh_sta_cleanup(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; - u32 changed; + u32 changed = 0; /* * maybe userspace handles peer allocation and peering, but in either * case the beacon is still generated by the kernel and we might need * an update. */ - changed = mesh_accept_plinks_update(sdata); + if (sdata->u.mesh.user_mpm && + sta->mesh->plink_state == NL80211_PLINK_ESTAB) + changed |= mesh_plink_dec_estab_count(sdata); + changed |= mesh_accept_plinks_update(sdata); if (!sdata->u.mesh.user_mpm) { changed |= mesh_plink_deactivate(sta); del_timer_sync(&sta->mesh->plink_timer); -- cgit v0.10.2 From cca0e542e02e48cce541a49c4046ec094ec27c1e Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Fri, 24 Jun 2016 14:49:02 +1000 Subject: powerpc/eeh: Fix wrong argument passed to eeh_rmv_device() When calling eeh_rmv_device() in eeh_reset_device() for partial hotplug case, @rmv_data instead of its address is the proper argument. Otherwise, the stack frame is corrupted when writing to @rmv_data (actually its address) in eeh_rmv_device(). It results in kernel crash as observed. This fixes the issue by passing @rmv_data, not its address to eeh_rmv_device() in eeh_reset_device(). Fixes: 67086e32b564 ("powerpc/eeh: powerpc/eeh: Support error recovery for VF PE") Reported-by: Pridhiviraj Paidipeddi Signed-off-by: Gavin Shan Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index b5f73cb..d70101e 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -647,7 +647,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus, pci_unlock_rescan_remove(); } } else if (frozen_bus) { - eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data); + eeh_pe_dev_traverse(pe, eeh_rmv_device, rmv_data); } /* -- cgit v0.10.2 From 62630ea768869beeb1e514b0bf5607a0c9b93d12 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:29 +0800 Subject: Revert "HID: multitouch: enable palm rejection if device implements confidence usage" This reverts commit 25a84db15b3f ("HID: multitouch: enable palm rejection if device implements confidence usage") The commit enables palm rejection for Win8 Precision Touchpad devices but the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very properly. This quirk is originally designed for some WIn7 touchscreens. Use of this for a Win8 Precision Touchpad will cause unexpected pointer jumping problem. Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 95b7d61..4ef7006 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -502,11 +502,6 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: - if (cls->name == MT_CLS_WIN_8 && - field->application == HID_DG_TOUCHPAD) { - cls->quirks &= ~MT_QUIRK_ALWAYS_VALID; - cls->quirks |= MT_QUIRK_VALID_IS_CONFIDENCE; - } mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: -- cgit v0.10.2 From 6dd2e27a103d716921cc4a1a96a9adc0a8e3ab57 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Thu, 23 Jun 2016 16:31:30 +0800 Subject: HID: multitouch: enable palm rejection for Windows Precision Touchpad The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Benjamin Tissoires Tested-by: Andy Lutomirski # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 4ef7006..fb6f1f4 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -61,6 +61,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_ALWAYS_VALID (1 << 4) #define MT_QUIRK_VALID_IS_INRANGE (1 << 5) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6) +#define MT_QUIRK_CONFIDENCE (1 << 7) #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8) #define MT_QUIRK_NO_AREA (1 << 9) #define MT_QUIRK_IGNORE_DUPLICATES (1 << 10) @@ -78,6 +79,7 @@ struct mt_slot { __s32 contactid; /* the device ContactID assigned to this slot */ bool touch_state; /* is the touch valid? */ bool inrange_state; /* is the finger in proximity of the sensor? */ + bool confidence_state; /* is the touch made by a finger? */ }; struct mt_class { @@ -502,6 +504,9 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, mt_store_field(usage, td, hi); return 1; case HID_DG_CONFIDENCE: + if (cls->name == MT_CLS_WIN_8 && + field->application == HID_DG_TOUCHPAD) + cls->quirks |= MT_QUIRK_CONFIDENCE; mt_store_field(usage, td, hi); return 1; case HID_DG_TIPSWITCH: @@ -614,6 +619,7 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; if (td->curvalid || (td->mtclass.quirks & MT_QUIRK_ALWAYS_VALID)) { + int active; int slotnum = mt_compute_slot(td, input); struct mt_slot *s = &td->curdata; struct input_mt *mt = input->mt; @@ -628,10 +634,14 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input) return; } + if (!(td->mtclass.quirks & MT_QUIRK_CONFIDENCE)) + s->confidence_state = 1; + active = (s->touch_state || s->inrange_state) && + s->confidence_state; + input_mt_slot(input, slotnum); - input_mt_report_slot_state(input, MT_TOOL_FINGER, - s->touch_state || s->inrange_state); - if (s->touch_state || s->inrange_state) { + input_mt_report_slot_state(input, MT_TOOL_FINGER, active); + if (active) { /* this finger is in proximity of the sensor */ int wide = (s->w > s->h); /* divided by two to match visual scale of touch */ @@ -696,6 +706,8 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field, td->curdata.touch_state = value; break; case HID_DG_CONFIDENCE: + if (quirks & MT_QUIRK_CONFIDENCE) + td->curdata.confidence_state = value; if (quirks & MT_QUIRK_VALID_IS_CONFIDENCE) td->curvalid = value; break; -- cgit v0.10.2 From 0888d5f3c0f183ea6177355752ada433d370ac89 Mon Sep 17 00:00:00 2001 From: daniel Date: Fri, 24 Jun 2016 12:35:18 +0200 Subject: Bridge: Fix ipv6 mc snooping if bridge has no ipv6 address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Fixes: d1d81d4c3dd8 ("bridge: check return value of ipv6_dev_get_saddr()") Signed-off-by: Daniel Danzberger Acked-by: Linus Lüssing Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 6852f3c..4384414 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -464,8 +464,11 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br, if (ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0, &ip6h->saddr)) { kfree_skb(skb); + br->has_ipv6_addr = 0; return NULL; } + + br->has_ipv6_addr = 1; ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest); hopopt = (u8 *)(ip6h + 1); @@ -1745,6 +1748,7 @@ void br_multicast_init(struct net_bridge *br) br->ip6_other_query.delay_time = 0; br->ip6_querier.port = NULL; #endif + br->has_ipv6_addr = 1; spin_lock_init(&br->multicast_lock); setup_timer(&br->multicast_router_timer, diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index c7fb5d7..52edecf 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -314,6 +314,7 @@ struct net_bridge u8 multicast_disabled:1; u8 multicast_querier:1; u8 multicast_query_use_ifaddr:1; + u8 has_ipv6_addr:1; u32 hash_elasticity; u32 hash_max; @@ -588,10 +589,22 @@ static inline bool br_multicast_is_router(struct net_bridge *br) static inline bool __br_multicast_querier_exists(struct net_bridge *br, - struct bridge_mcast_other_query *querier) + struct bridge_mcast_other_query *querier, + const bool is_ipv6) { + bool own_querier_enabled; + + if (br->multicast_querier) { + if (is_ipv6 && !br->has_ipv6_addr) + own_querier_enabled = false; + else + own_querier_enabled = true; + } else { + own_querier_enabled = false; + } + return time_is_before_jiffies(querier->delay_time) && - (br->multicast_querier || timer_pending(&querier->timer)); + (own_querier_enabled || timer_pending(&querier->timer)); } static inline bool br_multicast_querier_exists(struct net_bridge *br, @@ -599,10 +612,12 @@ static inline bool br_multicast_querier_exists(struct net_bridge *br, { switch (eth->h_proto) { case (htons(ETH_P_IP)): - return __br_multicast_querier_exists(br, &br->ip4_other_query); + return __br_multicast_querier_exists(br, + &br->ip4_other_query, false); #if IS_ENABLED(CONFIG_IPV6) case (htons(ETH_P_IPV6)): - return __br_multicast_querier_exists(br, &br->ip6_other_query); + return __br_multicast_querier_exists(br, + &br->ip6_other_query, true); #endif default: return false; -- cgit v0.10.2 From ab8ed951080e8f59b1da4ea10ac7c05ba24a3cbd Mon Sep 17 00:00:00 2001 From: Aaron Campbell Date: Fri, 24 Jun 2016 10:05:32 -0300 Subject: connector: fix out-of-order cn_proc netlink message delivery The proc connector messages include a sequence number, allowing userspace programs to detect lost messages. However, performing this detection is currently more difficult than necessary, since netlink messages can be delivered to the application out-of-order. To fix this, leave pre-emption disabled during cn_netlink_send(), and use GFP_NOWAIT. The following was written as a test case. Building the kernel w/ make -j32 proved a reliable way to generate out-of-order cn_proc messages. int main(int argc, char *argv[]) { static uint32_t last_seq[CPU_SETSIZE], seq; int cpu, fd; struct sockaddr_nl sa; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; struct proc_event cn_proc; }; } rmsg; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; enum proc_cn_mcast_op cn_mcast; }; } smsg; fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); if (fd < 0) { perror("socket"); } sa.nl_family = AF_NETLINK; sa.nl_groups = CN_IDX_PROC; sa.nl_pid = getpid(); if (bind(fd, (struct sockaddr *)&sa, sizeof(sa)) < 0) { perror("bind"); } memset(&smsg, 0, sizeof(smsg)); smsg.nl_hdr.nlmsg_len = sizeof(smsg); smsg.nl_hdr.nlmsg_pid = getpid(); smsg.nl_hdr.nlmsg_type = NLMSG_DONE; smsg.cn_msg.id.idx = CN_IDX_PROC; smsg.cn_msg.id.val = CN_VAL_PROC; smsg.cn_msg.len = sizeof(enum proc_cn_mcast_op); smsg.cn_mcast = PROC_CN_MCAST_LISTEN; if (send(fd, &smsg, sizeof(smsg), 0) != sizeof(smsg)) { perror("send"); } while (recv(fd, &rmsg, sizeof(rmsg), 0) == sizeof(rmsg)) { cpu = rmsg.cn_proc.cpu; if (cpu < 0) { continue; } seq = rmsg.cn_msg.seq; if ((last_seq[cpu] != 0) && (seq != last_seq[cpu] + 1)) { printf("out-of-order seq=%d on cpu=%d\n", seq, cpu); } last_seq[cpu] = seq; } /* NOTREACHED */ perror("recv"); return -1; } Signed-off-by: Aaron Campbell Signed-off-by: David S. Miller diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 15d06fc..b02f9c6 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -56,11 +56,21 @@ static struct cb_id cn_proc_event_id = { CN_IDX_PROC, CN_VAL_PROC }; /* proc_event_counts is used as the sequence number of the netlink message */ static DEFINE_PER_CPU(__u32, proc_event_counts) = { 0 }; -static inline void get_seq(__u32 *ts, int *cpu) +static inline void send_msg(struct cn_msg *msg) { preempt_disable(); - *ts = __this_cpu_inc_return(proc_event_counts) - 1; - *cpu = smp_processor_id(); + + msg->seq = __this_cpu_inc_return(proc_event_counts) - 1; + ((struct proc_event *)msg->data)->cpu = smp_processor_id(); + + /* + * Preemption remains disabled during send to ensure the messages are + * ordered according to their sequence numbers. + * + * If cn_netlink_send() fails, the data is not sent. + */ + cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_NOWAIT); + preempt_enable(); } @@ -77,7 +87,6 @@ void proc_fork_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_FORK; rcu_read_lock(); @@ -92,8 +101,7 @@ void proc_fork_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - /* If cn_netlink_send() failed, the data is not sent */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exec_connector(struct task_struct *task) @@ -108,7 +116,6 @@ void proc_exec_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXEC; ev->event_data.exec.process_pid = task->pid; @@ -118,7 +125,7 @@ void proc_exec_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_id_connector(struct task_struct *task, int which_id) @@ -150,14 +157,13 @@ void proc_id_connector(struct task_struct *task, int which_id) return; } rcu_read_unlock(); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_sid_connector(struct task_struct *task) @@ -172,7 +178,6 @@ void proc_sid_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_SID; ev->event_data.sid.process_pid = task->pid; @@ -182,7 +187,7 @@ void proc_sid_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_ptrace_connector(struct task_struct *task, int ptrace_id) @@ -197,7 +202,6 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_PTRACE; ev->event_data.ptrace.process_pid = task->pid; @@ -215,7 +219,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_comm_connector(struct task_struct *task) @@ -230,7 +234,6 @@ void proc_comm_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COMM; ev->event_data.comm.process_pid = task->pid; @@ -241,7 +244,7 @@ void proc_comm_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_coredump_connector(struct task_struct *task) @@ -256,7 +259,6 @@ void proc_coredump_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_COREDUMP; ev->event_data.coredump.process_pid = task->pid; @@ -266,7 +268,7 @@ void proc_coredump_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } void proc_exit_connector(struct task_struct *task) @@ -281,7 +283,6 @@ void proc_exit_connector(struct task_struct *task) msg = buffer_to_cn_msg(buffer); ev = (struct proc_event *)msg->data; memset(&ev->event_data, 0, sizeof(ev->event_data)); - get_seq(&msg->seq, &ev->cpu); ev->timestamp_ns = ktime_get_ns(); ev->what = PROC_EVENT_EXIT; ev->event_data.exit.process_pid = task->pid; @@ -293,7 +294,7 @@ void proc_exit_connector(struct task_struct *task) msg->ack = 0; /* not used */ msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /* @@ -325,7 +326,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg->ack = rcvd_ack + 1; msg->len = sizeof(*ev); msg->flags = 0; /* not used */ - cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL); + send_msg(msg); } /** -- cgit v0.10.2 From 9a0fee2b552b1235fb1706ae1fc664ae74573be8 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 24 Jun 2016 16:02:35 -0400 Subject: sock_diag: do not broadcast raw socket destruction Diag intends to broadcast tcp_sk and udp_sk socket destruction. Testing sk->sk_protocol for IPPROTO_TCP/IPPROTO_UDP alone is not sufficient for this. Raw sockets can have the same type. Add a test for sk->sk_type. Fixes: eb4cb008529c ("sock_diag: define destruction multicast groups") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index 4018b48..a0596ca0 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -36,6 +36,9 @@ enum sknetlink_groups sock_diag_destroy_group(const struct sock *sk) { switch (sk->sk_family) { case AF_INET: + if (sk->sk_type == SOCK_RAW) + return SKNLGRP_NONE; + switch (sk->sk_protocol) { case IPPROTO_TCP: return SKNLGRP_INET_TCP_DESTROY; @@ -45,6 +48,9 @@ enum sknetlink_groups sock_diag_destroy_group(const struct sock *sk) return SKNLGRP_NONE; } case AF_INET6: + if (sk->sk_type == SOCK_RAW) + return SKNLGRP_NONE; + switch (sk->sk_protocol) { case IPPROTO_TCP: return SKNLGRP_INET6_TCP_DESTROY; -- cgit v0.10.2 From 76a658c20efd541a62838d9ff68ce94170d7a549 Mon Sep 17 00:00:00 2001 From: Richard Guy Briggs Date: Tue, 28 Jun 2016 12:06:58 -0400 Subject: audit: move calcs after alloc and check when logging set loginuid Move the calculations of values after the allocation in case the allocation fails. This avoids wasting effort in the rare case that it fails, but more importantly saves us extra logic to release the tty ref. Signed-off-by: Richard Guy Briggs Signed-off-by: Paul Moore diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 71e14d8..33dafa7 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1985,14 +1985,15 @@ static void audit_log_set_loginuid(kuid_t koldloginuid, kuid_t kloginuid, if (!audit_enabled) return; + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_LOGIN); + if (!ab) + return; + uid = from_kuid(&init_user_ns, task_uid(current)); oldloginuid = from_kuid(&init_user_ns, koldloginuid); loginuid = from_kuid(&init_user_ns, kloginuid), tty = audit_get_tty(current); - ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_LOGIN); - if (!ab) - return; audit_log_format(ab, "pid=%d uid=%u", task_pid_nr(current), uid); audit_log_task_context(ab); audit_log_format(ab, " old-auid=%u auid=%u tty=%s old-ses=%u ses=%u res=%d", -- cgit v0.10.2 From 3f5be2da8565c1cce5655bb0948fcc957c6eb6c6 Mon Sep 17 00:00:00 2001 From: Richard Guy Briggs Date: Tue, 28 Jun 2016 12:07:50 -0400 Subject: audit: move audit_get_tty to reduce scope and kabi changes The only users of audit_get_tty and audit_put_tty are internal to audit, so move it out of include/linux/audit.h to kernel.h and create a proper function rather than inlining it. This also reduces kABI changes. Suggested-by: Paul Moore Signed-off-by: Richard Guy Briggs [PM: line wrapped description] Signed-off-by: Paul Moore diff --git a/include/linux/audit.h b/include/linux/audit.h index 32cdafb..b40ed5d 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -26,7 +26,6 @@ #include #include #include -#include #define AUDIT_INO_UNSET ((unsigned long)-1) #define AUDIT_DEV_UNSET ((dev_t)-1) @@ -344,23 +343,6 @@ static inline unsigned int audit_get_sessionid(struct task_struct *tsk) return tsk->sessionid; } -static inline struct tty_struct *audit_get_tty(struct task_struct *tsk) -{ - struct tty_struct *tty = NULL; - unsigned long flags; - - spin_lock_irqsave(&tsk->sighand->siglock, flags); - if (tsk->signal) - tty = tty_kref_get(tsk->signal->tty); - spin_unlock_irqrestore(&tsk->sighand->siglock, flags); - return tty; -} - -static inline void audit_put_tty(struct tty_struct *tty) -{ - tty_kref_put(tty); -} - extern void __audit_ipc_obj(struct kern_ipc_perm *ipcp); extern void __audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode); extern void __audit_bprm(struct linux_binprm *bprm); @@ -518,12 +500,6 @@ static inline unsigned int audit_get_sessionid(struct task_struct *tsk) { return -1; } -static inline struct tty_struct *audit_get_tty(struct task_struct *tsk) -{ - return NULL; -} -static inline void audit_put_tty(struct tty_struct *tty) -{ } static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp) { } static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid, diff --git a/kernel/audit.c b/kernel/audit.c index 384374a..d597101 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1866,6 +1866,23 @@ out_null: audit_log_format(ab, " exe=(null)"); } +struct tty_struct *audit_get_tty(struct task_struct *tsk) +{ + struct tty_struct *tty = NULL; + unsigned long flags; + + spin_lock_irqsave(&tsk->sighand->siglock, flags); + if (tsk->signal) + tty = tty_kref_get(tsk->signal->tty); + spin_unlock_irqrestore(&tsk->sighand->siglock, flags); + return tty; +} + +void audit_put_tty(struct tty_struct *tty) +{ + tty_kref_put(tty); +} + void audit_log_task_info(struct audit_buffer *ab, struct task_struct *tsk) { const struct cred *cred; diff --git a/kernel/audit.h b/kernel/audit.h index cbbe6bb..a492f4c 100644 --- a/kernel/audit.h +++ b/kernel/audit.h @@ -23,6 +23,7 @@ #include #include #include +#include /* AUDIT_NAMES is the number of slots we reserve in the audit_context * for saving names from getname(). If we get more names we will allocate @@ -262,6 +263,9 @@ extern struct audit_entry *audit_dupe_rule(struct audit_krule *old); extern void audit_log_d_path_exe(struct audit_buffer *ab, struct mm_struct *mm); +extern struct tty_struct *audit_get_tty(struct task_struct *tsk); +extern void audit_put_tty(struct tty_struct *tty); + /* audit watch functions */ #ifdef CONFIG_AUDIT_WATCH extern void audit_put_watch(struct audit_watch *watch); diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 33dafa7..60a354e 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -63,7 +63,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From e547f2628327fec6afd2e03b46f113f614cca05b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 25 Jun 2016 19:19:28 -0400 Subject: NFS: Fix another OPEN_DOWNGRADE bug Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by: Olga Kornievskaia Fixes: cd9288ffaea4 ("NFSv4: Fix another bug in the close/open_downgrade code") Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 406dd3e..ff416d0 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2882,12 +2882,11 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) call_close |= is_wronly; else if (is_wronly) calldata->arg.fmode |= FMODE_WRITE; + if (calldata->arg.fmode != (FMODE_READ|FMODE_WRITE)) + call_close |= is_rdwr; } else if (is_rdwr) calldata->arg.fmode |= FMODE_READ|FMODE_WRITE; - if (calldata->arg.fmode == 0) - call_close |= is_rdwr; - if (!nfs4_valid_open_stateid(state)) call_close = 0; spin_unlock(&state->owner->so_lock); -- cgit v0.10.2 From 54e430bbd490e18ab116afa4cd90dcc45787b3df Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 27 Jun 2016 09:09:40 -0500 Subject: ipr: Clear interrupt on croc/crocodile when running with LSI If we fall back to using LSI on the Croc or Crocodile chip we need to clear the interrupt so we don't hang the system. Cc: Tested-by: Benjamin Herrenschmidt Signed-off-by: Brian King Signed-off-by: Martin K. Petersen diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index d6a691e..d6803a9 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -10093,6 +10093,7 @@ static int ipr_probe_ioa(struct pci_dev *pdev, ioa_cfg->intr_flag = IPR_USE_MSI; else { ioa_cfg->intr_flag = IPR_USE_LSI; + ioa_cfg->clear_isr = 1; ioa_cfg->nvectors = 1; dev_info(&pdev->dev, "Cannot enable MSI.\n"); } -- cgit v0.10.2 From 5e7ff2ca7f2da55fe777167849d0c93403bd0dc8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 23 Jun 2016 15:05:26 -0400 Subject: SCSI: fix new bug in scsi_dev_info_list string matching Commit b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching") changed the way vendor- and model-string matching was carried out in the routine that looks up entries in a SCSI devinfo list. The new matching code failed to take into account the case of a maximum-length string; in such cases it could end up testing for a terminating '\0' byte beyond the end of the memory allocated to the string. This out-of-bounds bug was detected by UBSAN. I don't know if anybody has actually encountered this bug. The symptom would be that a device entry in the blacklist might not be matched properly if it contained an 8-character vendor name or a 16-character model name. Such entries certainly exist in scsi_static_device_list. This patch fixes the problem by adding a check for a maximum-length string before the '\0' test. Signed-off-by: Alan Stern Fixes: b704f70ce200 ("SCSI: fix bug in scsi_dev_info_list matching") Tested-by: Wilfried Klaebe CC: # v4.4+ Signed-off-by: Martin K. Petersen diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index ff41c31..eaccd65 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -429,7 +429,7 @@ static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor, * here, and we don't know what device it is * trying to work with, leave it as-is. */ - vmax = 8; /* max length of vendor */ + vmax = sizeof(devinfo->vendor); vskip = vendor; while (vmax > 0 && *vskip == ' ') { vmax--; @@ -439,7 +439,7 @@ static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor, while (vmax > 0 && vskip[vmax - 1] == ' ') --vmax; - mmax = 16; /* max length of model */ + mmax = sizeof(devinfo->model); mskip = model; while (mmax > 0 && *mskip == ' ') { mmax--; @@ -455,10 +455,12 @@ static struct scsi_dev_info_list *scsi_dev_info_list_find(const char *vendor, * Behave like the older version of get_device_flags. */ if (memcmp(devinfo->vendor, vskip, vmax) || - devinfo->vendor[vmax]) + (vmax < sizeof(devinfo->vendor) && + devinfo->vendor[vmax])) continue; if (memcmp(devinfo->model, mskip, mmax) || - devinfo->model[mmax]) + (mmax < sizeof(devinfo->model) && + devinfo->model[mmax])) continue; return devinfo; } else { -- cgit v0.10.2 From 190ce8693c23eae09ba5f303a83bf2fbeb6478b1 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 28 Jun 2016 13:01:04 +1000 Subject: powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 Currently we have 2 segments that are bolted for the kernel linear mapping (ie 0xc000... addresses). This is 0 to 1TB and also the kernel stacks. Anything accessed outside of these regions may need to be faulted in. (In practice machines with TM always have 1T segments) If a machine has < 2TB of memory we never fault on the kernel linear mapping as these two segments cover all physical memory. If a machine has > 2TB of memory, there may be structures outside of these two segments that need to be faulted in. This faulting can occur when running as a guest as the hypervisor may remove any SLB that's not bolted. When we treclaim and trecheckpoint we have a window where we need to run with the userspace GPRs. This means that we no longer have a valid stack pointer in r1. For this window we therefore clear MSR RI to indicate that any exceptions taken at this point won't be able to be handled. This means that we can't take segment misses in this RI=0 window. In this RI=0 region, we currently access the thread_struct for the process being context switched to or from. This thread_struct access may cause a segment fault since it's not guaranteed to be covered by the two bolted segment entries described above. We've seen this with a crash when running as a guest with > 2TB of memory on PowerVM: Unrecoverable exception 4100 at c00000000004f138 Oops: Unrecoverable exception, sig: 6 [#1] SMP NR_CPUS=2048 NUMA pSeries CPU: 1280 PID: 7755 Comm: kworker/1280:1 Tainted: G X 4.4.13-46-default #1 task: c000189001df4210 ti: c000189001d5c000 task.ti: c000189001d5c000 NIP: c00000000004f138 LR: 0000000010003a24 CTR: 0000000010001b20 REGS: c000189001d5f730 TRAP: 4100 Tainted: G X (4.4.13-46-default) MSR: 8000000100001031 CR: 24000048 XER: 00000000 CFAR: c00000000004ed18 SOFTE: 0 GPR00: ffffffffc58d7b60 c000189001d5f9b0 00000000100d7d00 000000003a738288 GPR04: 0000000000002781 0000000000000006 0000000000000000 c0000d1f4d889620 GPR08: 000000000000c350 00000000000008ab 00000000000008ab 00000000100d7af0 GPR12: 00000000100d7ae8 00003ffe787e67a0 0000000000000000 0000000000000211 GPR16: 0000000010001b20 0000000000000000 0000000000800000 00003ffe787df110 GPR20: 0000000000000001 00000000100d1e10 0000000000000000 00003ffe787df050 GPR24: 0000000000000003 0000000000010000 0000000000000000 00003fffe79e2e30 GPR28: 00003fffe79e2e68 00000000003d0f00 00003ffe787e67a0 00003ffe787de680 NIP [c00000000004f138] restore_gprs+0xd0/0x16c LR [0000000010003a24] 0x10003a24 Call Trace: [c000189001d5f9b0] [c000189001d5f9f0] 0xc000189001d5f9f0 (unreliable) [c000189001d5fb90] [c00000000001583c] tm_recheckpoint+0x6c/0xa0 [c000189001d5fbd0] [c000000000015c40] __switch_to+0x2c0/0x350 [c000189001d5fc30] [c0000000007e647c] __schedule+0x32c/0x9c0 [c000189001d5fcb0] [c0000000007e6b58] schedule+0x48/0xc0 [c000189001d5fce0] [c0000000000deabc] worker_thread+0x22c/0x5b0 [c000189001d5fd80] [c0000000000e7000] kthread+0x110/0x130 [c000189001d5fe30] [c000000000009538] ret_from_kernel_thread+0x5c/0xa4 Instruction dump: 7cb103a6 7cc0e3a6 7ca222a6 78a58402 38c00800 7cc62838 08860000 7cc000a6 38a00006 78c60022 7cc62838 0b060000 7ccff120 e8270078 e8a70098 ---[ end trace 602126d0a1dedd54 ]--- This fixes this by copying the required data from the thread_struct to the stack before we clear MSR RI. Then once we clear RI, we only access the stack, guaranteeing there's no segment miss. We also tighten the region over which we set RI=0 on the treclaim() path. This may have a slight performance impact since we're adding an mtmsr instruction. Fixes: 090b9284d725 ("powerpc/tm: Clear MSR RI in non-recoverable TM code") Signed-off-by: Michael Neuling Reviewed-by: Cyril Bur Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index bf8f34a..b7019b5 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -110,17 +110,11 @@ _GLOBAL(tm_reclaim) std r3, STK_PARAM(R3)(r1) SAVE_NVGPRS(r1) - /* We need to setup MSR for VSX register save instructions. Here we - * also clear the MSR RI since when we do the treclaim, we won't have a - * valid kernel pointer for a while. We clear RI here as it avoids - * adding another mtmsr closer to the treclaim. This makes the region - * maked as non-recoverable wider than it needs to be but it saves on - * inserting another mtmsrd later. - */ + /* We need to setup MSR for VSX register save instructions. */ mfmsr r14 mr r15, r14 ori r15, r15, MSR_FP - li r16, MSR_RI + li r16, 0 ori r16, r16, MSR_EE /* IRQs hard off */ andc r15, r15, r16 oris r15, r15, MSR_VEC@h @@ -176,7 +170,17 @@ dont_backup_fp: 1: tdeqi r6, 0 EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0 - /* The moment we treclaim, ALL of our GPRs will switch + /* Clear MSR RI since we are about to change r1, EE is already off. */ + li r4, 0 + mtmsrd r4, 1 + + /* + * BE CAREFUL HERE: + * At this point we can't take an SLB miss since we have MSR_RI + * off. Load only to/from the stack/paca which are in SLB bolted regions + * until we turn MSR RI back on. + * + * The moment we treclaim, ALL of our GPRs will switch * to user register state. (FPRs, CCR etc. also!) * Use an sprg and a tm_scratch in the PACA to shuffle. */ @@ -197,6 +201,11 @@ dont_backup_fp: /* Store the PPR in r11 and reset to decent value */ std r11, GPR11(r1) /* Temporary stash */ + + /* Reset MSR RI so we can take SLB faults again */ + li r11, MSR_RI + mtmsrd r11, 1 + mfspr r11, SPRN_PPR HMT_MEDIUM @@ -397,11 +406,6 @@ restore_gprs: ld r5, THREAD_TM_DSCR(r3) ld r6, THREAD_TM_PPR(r3) - /* Clear the MSR RI since we are about to change R1. EE is already off - */ - li r4, 0 - mtmsrd r4, 1 - REST_GPR(0, r7) /* GPR0 */ REST_2GPRS(2, r7) /* GPR2-3 */ REST_GPR(4, r7) /* GPR4 */ @@ -439,10 +443,33 @@ restore_gprs: ld r6, _CCR(r7) mtcr r6 - REST_GPR(1, r7) /* GPR1 */ - REST_GPR(5, r7) /* GPR5-7 */ REST_GPR(6, r7) - ld r7, GPR7(r7) + + /* + * Store r1 and r5 on the stack so that we can access them + * after we clear MSR RI. + */ + + REST_GPR(5, r7) + std r5, -8(r1) + ld r5, GPR1(r7) + std r5, -16(r1) + + REST_GPR(7, r7) + + /* Clear MSR RI since we are about to change r1. EE is already off */ + li r5, 0 + mtmsrd r5, 1 + + /* + * BE CAREFUL HERE: + * At this point we can't take an SLB miss since we have MSR_RI + * off. Load only to/from the stack/paca which are in SLB bolted regions + * until we turn MSR RI back on. + */ + + ld r5, -8(r1) + ld r1, -16(r1) /* Commit register state as checkpointed state: */ TRECHKPT -- cgit v0.10.2 From a4859d75944a726533ab86d24bb5ffd1b2b7d6cc Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 29 Jun 2016 08:26:59 +0200 Subject: ovl: fix dentry leak for default_permissions When using the 'default_permissions' mount option, ovl_permission() on non-directories was missing a dput(alias), resulting in "BUG Dentry still in use". Signed-off-by: Miklos Szeredi Fixes: 8d3095f4ad47 ("ovl: default permissions") Cc: # v4.5+ diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index 1dbeab6..8514d69 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -121,16 +121,18 @@ int ovl_permission(struct inode *inode, int mask) err = vfs_getattr(&realpath, &stat); if (err) - return err; + goto out_dput; + err = -ESTALE; if ((stat.mode ^ inode->i_mode) & S_IFMT) - return -ESTALE; + goto out_dput; inode->i_mode = stat.mode; inode->i_uid = stat.uid; inode->i_gid = stat.gid; - return generic_permission(inode, mask); + err = generic_permission(inode, mask); + goto out_dput; } /* Careful in RCU walk mode */ -- cgit v0.10.2 From eee25ab19de632af1ab4d2ac50bfc5006802e664 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 28 Jun 2016 22:11:14 +0200 Subject: ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock Fix pll3x2 and pll7x2 not having a parent clock, specifically this fixes the kernel turning of pll3 while simplefb is using it when uboot has configured things to use pll3x2 as lcd ch clk parent. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f480051..2c34bbb 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -232,6 +232,7 @@ pll3x2: pll3x2_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clocks = <&pll3>; clock-div = <1>; clock-mult = <2>; clock-output-names = "pll3-2x"; @@ -273,6 +274,7 @@ pll7x2: pll7x2_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clocks = <&pll7>; clock-div = <1>; clock-mult = <2>; clock-output-names = "pll7-2x"; -- cgit v0.10.2 From 69fc58a57e56bf5e39b48809aefffdaa1b04c945 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 24 Jun 2016 16:25:24 -0700 Subject: net: phy: Manage fixed PHY address space using IDA If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 2d2e433..9ec7f73 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -23,6 +23,7 @@ #include #include #include +#include #define MII_REGS_NUM 29 @@ -286,6 +287,8 @@ err_regs: } EXPORT_SYMBOL_GPL(fixed_phy_add); +static DEFINE_IDA(phy_fixed_ida); + static void fixed_phy_del(int phy_addr) { struct fixed_mdio_bus *fmb = &platform_fmb; @@ -297,14 +300,12 @@ static void fixed_phy_del(int phy_addr) if (gpio_is_valid(fp->link_gpio)) gpio_free(fp->link_gpio); kfree(fp); + ida_simple_remove(&phy_fixed_ida, phy_addr); return; } } } -static int phy_fixed_addr; -static DEFINE_SPINLOCK(phy_fixed_addr_lock); - struct phy_device *fixed_phy_register(unsigned int irq, struct fixed_phy_status *status, int link_gpio, @@ -319,17 +320,15 @@ struct phy_device *fixed_phy_register(unsigned int irq, return ERR_PTR(-EPROBE_DEFER); /* Get the next available PHY address, up to PHY_MAX_ADDR */ - spin_lock(&phy_fixed_addr_lock); - if (phy_fixed_addr == PHY_MAX_ADDR) { - spin_unlock(&phy_fixed_addr_lock); - return ERR_PTR(-ENOSPC); - } - phy_addr = phy_fixed_addr++; - spin_unlock(&phy_fixed_addr_lock); + phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL); + if (phy_addr < 0) + return ERR_PTR(phy_addr); ret = fixed_phy_add(irq, phy_addr, status, link_gpio); - if (ret < 0) + if (ret < 0) { + ida_simple_remove(&phy_fixed_ida, phy_addr); return ERR_PTR(ret); + } phy = get_phy_device(fmb->mii_bus, phy_addr, false); if (IS_ERR(phy)) { @@ -434,6 +433,7 @@ static void __exit fixed_mdio_bus_exit(void) list_del(&fp->node); kfree(fp); } + ida_destroy(&phy_fixed_ida); } module_exit(fixed_mdio_bus_exit); -- cgit v0.10.2 From 0b3dd7dfb81ad8af53791ea2bb64b83bac1b7d32 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Sun, 26 Jun 2016 11:16:09 +0200 Subject: batman-adv: replace WARN with rate limited output on non-existing VLAN If a VLAN tagged frame is received and the corresponding VLAN is not configured on the soft interface, it will splat a WARN on every packet received. This is a quite annoying behaviour for some scenarios, e.g. if bat0 is bridged with eth0, and there are arbitrary VLAN tagged frames from Ethernet coming in without having any VLAN configuration on bat0. The code should probably create vlan objects on the fly and transparently transport these VLAN-tagged Ethernet frames, but until this is done, at least the WARN splat should be replaced by a rate limited output. Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: David S. Miller diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index feaf492b..72abab7 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -650,8 +650,10 @@ bool batadv_tt_local_add(struct net_device *soft_iface, const u8 *addr, /* increase the refcounter of the related vlan */ vlan = batadv_softif_vlan_get(bat_priv, vid); - if (WARN(!vlan, "adding TT local entry %pM to non-existent VLAN %d", - addr, BATADV_PRINT_VID(vid))) { + if (!vlan) { + net_ratelimited_function(batadv_info, soft_iface, + "adding TT local entry %pM to non-existent VLAN %d\n", + addr, BATADV_PRINT_VID(vid)); kfree(tt_local); tt_local = NULL; goto out; -- cgit v0.10.2 From 9c4604a298e0a9807eaf2cd912d1ebf24d98fbeb Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 26 Jun 2016 11:16:10 +0200 Subject: batman-adv: Fix use-after-free/double-free of tt_req_node The tt_req_node is added and removed from a list inside a spinlock. But the locking is sometimes removed even when the object is still referenced and will be used later via this reference. For example batadv_send_tt_request can create a new tt_req_node (including add to a list) and later re-acquires the lock to remove it from the list and to free it. But at this time another context could have already removed this tt_req_node from the list and freed it. CPU#0 batadv_batman_skb_recv from net_device 0 -> batadv_iv_ogm_receive -> batadv_iv_ogm_process -> batadv_iv_ogm_process_per_outif -> batadv_tvlv_ogm_receive -> batadv_tvlv_ogm_receive -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_ogm_handler_v1 -> batadv_tt_update_orig -> batadv_send_tt_request -> batadv_tt_req_node_new spin_lock(...) allocates new tt_req_node and adds it to list spin_unlock(...) return tt_req_node CPU#1 batadv_batman_skb_recv from net_device 1 -> batadv_recv_unicast_tvlv -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_unicast_handler_v1 -> batadv_handle_tt_response spin_lock(...) tt_req_node gets removed from list and is freed spin_unlock(...) CPU#0 <- returned to batadv_send_tt_request spin_lock(...) tt_req_node gets removed from list and is freed MEMORY CORRUPTION/SEGFAULT/... spin_unlock(...) This can only be solved via reference counting to allow multiple contexts to handle the list manipulation while making sure that only the last context holding a reference will free the object. Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann Tested-by: Martin Weinelt Tested-by: Amadeus Alfa Signed-off-by: Marek Lindner Signed-off-by: David S. Miller diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 72abab7..cfb5ccd 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -2271,6 +2271,29 @@ static u32 batadv_tt_local_crc(struct batadv_priv *bat_priv, return crc; } +/** + * batadv_tt_req_node_release - free tt_req node entry + * @ref: kref pointer of the tt req_node entry + */ +static void batadv_tt_req_node_release(struct kref *ref) +{ + struct batadv_tt_req_node *tt_req_node; + + tt_req_node = container_of(ref, struct batadv_tt_req_node, refcount); + + kfree(tt_req_node); +} + +/** + * batadv_tt_req_node_put - decrement the tt_req_node refcounter and + * possibly release it + * @tt_req_node: tt_req_node to be free'd + */ +static void batadv_tt_req_node_put(struct batadv_tt_req_node *tt_req_node) +{ + kref_put(&tt_req_node->refcount, batadv_tt_req_node_release); +} + static void batadv_tt_req_list_free(struct batadv_priv *bat_priv) { struct batadv_tt_req_node *node; @@ -2280,7 +2303,7 @@ static void batadv_tt_req_list_free(struct batadv_priv *bat_priv) hlist_for_each_entry_safe(node, safe, &bat_priv->tt.req_list, list) { hlist_del_init(&node->list); - kfree(node); + batadv_tt_req_node_put(node); } spin_unlock_bh(&bat_priv->tt.req_list_lock); @@ -2317,7 +2340,7 @@ static void batadv_tt_req_purge(struct batadv_priv *bat_priv) if (batadv_has_timed_out(node->issued_at, BATADV_TT_REQUEST_TIMEOUT)) { hlist_del_init(&node->list); - kfree(node); + batadv_tt_req_node_put(node); } } spin_unlock_bh(&bat_priv->tt.req_list_lock); @@ -2349,9 +2372,11 @@ batadv_tt_req_node_new(struct batadv_priv *bat_priv, if (!tt_req_node) goto unlock; + kref_init(&tt_req_node->refcount); ether_addr_copy(tt_req_node->addr, orig_node->orig); tt_req_node->issued_at = jiffies; + kref_get(&tt_req_node->refcount); hlist_add_head(&tt_req_node->list, &bat_priv->tt.req_list); unlock: spin_unlock_bh(&bat_priv->tt.req_list_lock); @@ -2615,13 +2640,19 @@ static bool batadv_send_tt_request(struct batadv_priv *bat_priv, out: if (primary_if) batadv_hardif_put(primary_if); + if (ret && tt_req_node) { spin_lock_bh(&bat_priv->tt.req_list_lock); - /* hlist_del_init() verifies tt_req_node still is in the list */ - hlist_del_init(&tt_req_node->list); + if (!hlist_unhashed(&tt_req_node->list)) { + hlist_del_init(&tt_req_node->list); + batadv_tt_req_node_put(tt_req_node); + } spin_unlock_bh(&bat_priv->tt.req_list_lock); - kfree(tt_req_node); } + + if (tt_req_node) + batadv_tt_req_node_put(tt_req_node); + kfree(tvlv_tt_data); return ret; } @@ -3057,7 +3088,7 @@ static void batadv_handle_tt_response(struct batadv_priv *bat_priv, if (!batadv_compare_eth(node->addr, resp_src)) continue; hlist_del_init(&node->list); - kfree(node); + batadv_tt_req_node_put(node); } spin_unlock_bh(&bat_priv->tt.req_list_lock); diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 6a577f4..ba846b0 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1137,11 +1137,13 @@ struct batadv_tt_change_node { * struct batadv_tt_req_node - data to keep track of the tt requests in flight * @addr: mac address address of the originator this request was sent to * @issued_at: timestamp used for purging stale tt requests + * @refcount: number of contexts the object is used by * @list: list node for batadv_priv_tt::req_list */ struct batadv_tt_req_node { u8 addr[ETH_ALEN]; unsigned long issued_at; + struct kref refcount; struct hlist_node list; }; -- cgit v0.10.2 From baceced93274ff2f846eae991664f9094425ffa8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 26 Jun 2016 11:16:11 +0200 Subject: batman-adv: Fix double-put of vlan object Each batadv_tt_local_entry hold a single reference to a batadv_softif_vlan. In case a new entry cannot be added to the hash table, the error path puts the reference, but the reference will also now be dropped by batadv_tt_local_entry_release(). Fixes: a33d970d0b54 ("batman-adv: Fix reference counting of vlan object for tt_local_entry") Signed-off-by: Ben Hutchings Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: David S. Miller diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index cfb5ccd..57ec87f 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -693,7 +693,6 @@ bool batadv_tt_local_add(struct net_device *soft_iface, const u8 *addr, if (unlikely(hash_added != 0)) { /* remove the reference for the hash */ batadv_tt_local_entry_put(tt_local); - batadv_softif_vlan_put(vlan); goto out; } -- cgit v0.10.2 From 3b55e4422087f9f7b241031d758a0c65584e4297 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 26 Jun 2016 11:16:12 +0200 Subject: batman-adv: Fix ICMP RR ethernet access after skb_linearize The skb_linearize may reallocate the skb. This makes the calculated pointer for ethhdr invalid. But it the pointer is used later to fill in the RR field of the batadv_icmp_packet_rr packet. Instead re-evaluate eth_hdr after the skb_linearize+skb_cow to fix the pointer and avoid the invalid read. Fixes: da6b8c20a5b8 ("batman-adv: generalize batman-adv icmp packet handling") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: David S. Miller diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index e3857ed..6c2901a 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -374,6 +374,7 @@ int batadv_recv_icmp_packet(struct sk_buff *skb, if (skb_cow(skb, ETH_HLEN) < 0) goto out; + ethhdr = eth_hdr(skb); icmph = (struct batadv_icmp_header *)skb->data; icmp_packet_rr = (struct batadv_icmp_packet_rr *)icmph; if (icmp_packet_rr->rr_cur >= BATADV_RR_LEN) -- cgit v0.10.2 From 420cb1b764f9169c5d2601b4af90e4a1702345ee Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 26 Jun 2016 11:16:13 +0200 Subject: batman-adv: Clean up untagged vlan when destroying via rtnl-link The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Signed-off-by: David S. Miller diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 343d2c9..287a387 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -1033,7 +1033,9 @@ void batadv_softif_destroy_sysfs(struct net_device *soft_iface) static void batadv_softif_destroy_netlink(struct net_device *soft_iface, struct list_head *head) { + struct batadv_priv *bat_priv = netdev_priv(soft_iface); struct batadv_hard_iface *hard_iface; + struct batadv_softif_vlan *vlan; list_for_each_entry(hard_iface, &batadv_hardif_list, list) { if (hard_iface->soft_iface == soft_iface) @@ -1041,6 +1043,13 @@ static void batadv_softif_destroy_netlink(struct net_device *soft_iface, BATADV_IF_CLEANUP_KEEP); } + /* destroy the "untagged" VLAN */ + vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS); + if (vlan) { + batadv_softif_destroy_vlan(bat_priv, vlan); + batadv_softif_vlan_put(vlan); + } + batadv_sysfs_del_meshif(soft_iface); unregister_netdevice_queue(soft_iface, head); } -- cgit v0.10.2 From 3ec0a0f10ceb77c78f540ded1d13bf0cf7f89a07 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Mon, 27 Jun 2016 13:09:59 +0530 Subject: net: marvell: Add separate config ANEG function for Marvell 88E1111 Marvell 88E1111 currently uses the generic marvell config ANEG function. This function has a sequence accessing Page 5 and Register 31, both of which are not defined or reserved for this PHY. Hence this patch adds a new config ANEG function for Marvell 88E1111 without these erroneous accesses. Signed-off-by: Harini Katakam Signed-off-by: David S. Miller diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 79ccc11..ec2c1ee 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1111_config_aneg(struct phy_device *phydev) +{ + int err; + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + err = marvell_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, + MII_M1111_PHY_LED_DIRECT); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + if (err < 0) + return err; + + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; +} + #ifdef CONFIG_OF_MDIO /* * Set and/or override some configuration registers based on the @@ -1175,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1111_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, -- cgit v0.10.2 From 664a84d2c77cbff2945ed7f96d08afbba42b6293 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 13 May 2016 20:53:56 +0300 Subject: drm/i915: Refresh cached DP port register value on resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During hibernation the cached DP port register value will be left with whatever value we have there when we create the hibernation image. Currently that means the port (and eDP PLL) will be off in the cached value. However when we resume there is no guarantee that the value in the actual register will match the cached value. If i915 isn't loaded in the kernel that loads the hibernation image, the port may well be on (eg. left on by the BIOS). The encoder state readout does the right thing in this case and updates our encoder state to reflect the actual hardware state. However the post-resume modeset will then use the stale cached port register value in intel_dp_link_down() and potentially confuse the hardware. This was caught by the following assert WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915] eDP PLL state assertion failure (expected on, current off) on account of the eDP PLL getting prematurely turned off when shutting down the port, since the DP_PLL_ENABLE bit wasn't set in the cached register value. Presumably I introduced this problem in commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") as before that we didn't update the cached value after shuttting the port down. That's assuming the port got enabled at least once prior to hibernating. If that didn't happen then the cached value would still have been totally out of sync with reality (eg. first boot w/o eDP on, then hibernate, and then resume with eDP on). So, let's fix this properly and refresh the cached register value from the hardware register during resume. DDI platforms shouldn't use the cached value during port disable at least, so shouldn't have this particular issue. They might still have issues if we skip the initial modeset and then try to retrain the link or something. But untangling this DP vs. DDI mess is a bigger topic, so let's jut punt on DDI for now. Cc: Jani Nikula Cc: stable@vger.kernel.org Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 64989ca4b27acb026b6496ec21e43bee66f86a5b) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79cf2d5..49c582d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4899,13 +4899,15 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) void intel_dp_encoder_reset(struct drm_encoder *encoder) { - struct intel_dp *intel_dp; + struct drm_i915_private *dev_priv = to_i915(encoder->dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + if (!HAS_DDI(dev_priv)) + intel_dp->DP = I915_READ(intel_dp->output_reg); if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) return; - intel_dp = enc_to_intel_dp(encoder); - pps_lock(intel_dp); /* -- cgit v0.10.2 From ea12e2a0cad62f6d634da62e7bf50ffe077de13b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:30 +0300 Subject: drm/i915/bxt: Avoid early timeout during PLL enable Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. I noticed this via the PLL locking timing out incorrectly, with this fix I couldn't reproduce the problem. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-2-git-send-email-imre.deak@intel.com (cherry picked from commit 0b786e41c73956126f6297764459021deef8aba7) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index baf6f55..58f60b2 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1377,8 +1377,8 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); POSTING_READ(BXT_PORT_PLL_ENABLE(port)); - if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & - PORT_PLL_LOCK), 200)) + if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), + 200)) DRM_ERROR("PLL %d not locked\n", port); /* -- cgit v0.10.2 From 11f6145791775ce41b8993fd29e19eb53ef0ff14 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:31 +0300 Subject: drm/i915/lpt: Avoid early timeout during FDI PHY reset Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-3-git-send-email-imre.deak@intel.com (cherry picked from commit cf3598c23cd09d5f063fa8c12fe9ddd5a352d3d5) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 56a1637..a164ea4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8447,16 +8447,16 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv) tmp |= FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS, 100)) + if (wait_for_us(I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS, 100)) DRM_ERROR("FDI mPHY reset assert timeout\n"); tmp = I915_READ(SOUTH_CHICKEN2); tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) + if (wait_for_us((I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) DRM_ERROR("FDI mPHY reset de-assert timeout\n"); } -- cgit v0.10.2 From fa7c13e5b1e2076b0ec716ed584ab76f9e65b7a6 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:32 +0300 Subject: drm/i915/hsw: Avoid early timeout during LCPLL disable/restore Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-4-git-send-email-imre.deak@intel.com (cherry picked from commit f53dd63f1119a98a16d1a5a7cb3277a2f1ff483d) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a164ea4..04452cf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9440,8 +9440,8 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val |= LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE, 1)) + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) DRM_ERROR("Switching to FCLK failed\n"); val = I915_READ(LCPLL_CTL); @@ -9514,8 +9514,8 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val &= ~LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) DRM_ERROR("Switching back to LCPLL failed\n"); } -- cgit v0.10.2 From ba34a65324259082dc6d2924cb82d562db1c6a6b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:33 +0300 Subject: drm/i915: Avoid early timeout during AUX transfers Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Due to the relatively long 10ms timeout, probably this didn't cause any real problems, but fix it in any case for consistency. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-5-git-send-email-imre.deak@intel.com (cherry picked from commit 713a6b668932213247b394559bc229cd0fec2777) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 49c582d..40745e38d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -663,7 +663,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else - done = wait_for_atomic(C, 10) == 0; + done = wait_for(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); -- cgit v0.10.2 From 5be1ea899da4f11de92897d2ea706e0820609b9e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:32 +0300 Subject: net/mlx5: Update command strings Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index dcd2df6..0b49862 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -545,6 +545,7 @@ const char *mlx5_command_str(int command) MLX5_COMMAND_STR_CASE(ALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(DEALLOC_FLOW_COUNTER); MLX5_COMMAND_STR_CASE(QUERY_FLOW_COUNTER); + MLX5_COMMAND_STR_CASE(MODIFY_FLOW_TABLE); default: return "unknown command opcode"; } } -- cgit v0.10.2 From 7092fe866907f4f243122ab388cbf0e77305afaa Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Mon, 27 Jun 2016 12:08:33 +0300 Subject: net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a19b593..c65f4a1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1508,8 +1508,9 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */ { PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */ { PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */ - { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5 */ + { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5, PCIe 3.0 */ { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */ + { PCI_VDEVICE(MELLANOX, 0x1019) }, /* ConnectX-5, PCIe 4.0 */ { 0, } }; -- cgit v0.10.2 From e0f46eb9f64ca2e97d242b6e02b8ae2c7fe6dc56 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 27 Jun 2016 12:08:34 +0300 Subject: net/mlx5e: Change enum to better reflect usage Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index e8a6c33..baa991a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -401,7 +401,7 @@ enum mlx5e_traffic_types { }; enum { - MLX5E_STATE_ASYNC_EVENTS_ENABLE, + MLX5E_STATE_ASYNC_EVENTS_ENABLED, MLX5E_STATE_OPENED, MLX5E_STATE_DESTROYING, }; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f5c8d5d..4383f8c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -244,7 +244,7 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, { struct mlx5e_priv *priv = vpriv; - if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state)) + if (!test_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state)) return; switch (event) { @@ -260,12 +260,12 @@ static void mlx5e_async_event(struct mlx5_core_dev *mdev, void *vpriv, static void mlx5e_enable_async_events(struct mlx5e_priv *priv) { - set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + set_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); } static void mlx5e_disable_async_events(struct mlx5e_priv *priv) { - clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLE, &priv->state); + clear_bit(MLX5E_STATE_ASYNC_EVENTS_ENABLED, &priv->state); synchronize_irq(mlx5_get_msix_vec(priv->mdev, MLX5_EQ_VEC_ASYNC)); } -- cgit v0.10.2 From fd4782c21359cfd52af4c3180a2bb6bad55c1eba Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:35 +0300 Subject: net/mlx5e: Check for BlueFlame capability before allocating SQ uar Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 4383f8c..793d7a1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -580,7 +580,7 @@ static int mlx5e_create_sq(struct mlx5e_channel *c, void *sqc_wq = MLX5_ADDR_OF(sqc, sqc, wq); int err; - err = mlx5_alloc_map_uar(mdev, &sq->uar, true); + err = mlx5_alloc_map_uar(mdev, &sq->uar, !!MLX5_CAP_GEN(mdev, bf)); if (err) return err; -- cgit v0.10.2 From 9ceec359e4ebdbbfd35375203c5bd06d602225f7 Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Mon, 27 Jun 2016 12:08:36 +0300 Subject: net/mlx5e: Prevent adding the same vxlan port Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index f2fd1ef..05de772 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -105,6 +105,9 @@ static void mlx5e_vxlan_add_port(struct work_struct *work) struct mlx5e_vxlan *vxlan; int err; + if (mlx5e_vxlan_lookup_port(priv, port)) + goto free_work; + if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port)) goto free_work; -- cgit v0.10.2 From ed80ec4c179d1f44cc1b36c7a102353ae6103793 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:37 +0300 Subject: net/mlx5e: Fix number of PFC counters reported to ethtool Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index fc7dcc0..c709d41 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -184,7 +184,9 @@ static unsigned long mlx5e_query_pfc_combined(struct mlx5e_priv *priv) #define MLX5E_NUM_SQ_STATS(priv) \ (NUM_SQ_STATS * priv->params.num_channels * priv->params.num_tc * \ test_bit(MLX5E_STATE_OPENED, &priv->state)) -#define MLX5E_NUM_PFC_COUNTERS(priv) hweight8(mlx5e_query_pfc_combined(priv)) +#define MLX5E_NUM_PFC_COUNTERS(priv) \ + (hweight8(mlx5e_query_pfc_combined(priv)) * \ + NUM_PPORT_PER_PRIO_PFC_COUNTERS) static int mlx5e_get_sset_count(struct net_device *dev, int sset) { -- cgit v0.10.2 From bfe6d8d1d433cbd5513a93132695e6dbdd79e6f2 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 27 Jun 2016 12:08:38 +0300 Subject: net/mlx5e: Reorganize ethtool statistics Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index c709d41..e667a87 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -213,42 +213,41 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* SW counters */ for (i = 0; i < NUM_SW_COUNTERS; i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, sw_stats_desc[i].format); /* Q counters */ for (i = 0; i < MLX5E_NUM_Q_CNTRS(priv); i++) - strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].name); + strcpy(data + (idx++) * ETH_GSTRING_LEN, q_stats_desc[i].format); /* VPORT counters */ for (i = 0; i < NUM_VPORT_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - vport_stats_desc[i].name); + vport_stats_desc[i].format); /* PPORT counters */ for (i = 0; i < NUM_PPORT_802_3_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_802_3_stats_desc[i].name); + pport_802_3_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2863_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2863_stats_desc[i].name); + pport_2863_stats_desc[i].format); for (i = 0; i < NUM_PPORT_2819_COUNTERS; i++) strcpy(data + (idx++) * ETH_GSTRING_LEN, - pport_2819_stats_desc[i].name); + pport_2819_stats_desc[i].format); for (prio = 0; prio < NUM_PPORT_PRIO; prio++) { for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, - pport_per_prio_traffic_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_traffic_stats_desc[i].format, prio); } pfc_combined = mlx5e_query_pfc_combined(priv); for_each_set_bit(prio, &pfc_combined, NUM_PPORT_PRIO) { for (i = 0; i < NUM_PPORT_PER_PRIO_PFC_COUNTERS; i++) { - sprintf(data + (idx++) * ETH_GSTRING_LEN, "prio%d_%s", - prio, pport_per_prio_pfc_stats_desc[i].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + pport_per_prio_pfc_stats_desc[i].format, prio); } } @@ -258,16 +257,15 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data) /* per channel counters */ for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_RQ_STATS; j++) - sprintf(data + (idx++) * ETH_GSTRING_LEN, "rx%d_%s", i, - rq_stats_desc[j].name); + sprintf(data + (idx++) * ETH_GSTRING_LEN, + rq_stats_desc[j].format, i); for (tc = 0; tc < priv->params.num_tc; tc++) for (i = 0; i < priv->params.num_channels; i++) for (j = 0; j < NUM_SQ_STATS; j++) sprintf(data + (idx++) * ETH_GSTRING_LEN, - "tx%d_%s", - priv->channeltc_to_txq_map[i][tc], - sq_stats_desc[j].name); + sq_stats_desc[j].format, + priv->channeltc_to_txq_map[i][tc]); } static void mlx5e_get_strings(struct net_device *dev, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 793d7a1..cb6defd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -105,11 +105,11 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->rx_packets += rq_stats->packets; s->rx_bytes += rq_stats->bytes; - s->lro_packets += rq_stats->lro_packets; - s->lro_bytes += rq_stats->lro_bytes; + s->rx_lro_packets += rq_stats->lro_packets; + s->rx_lro_bytes += rq_stats->lro_bytes; s->rx_csum_none += rq_stats->csum_none; - s->rx_csum_sw += rq_stats->csum_sw; - s->rx_csum_inner += rq_stats->csum_inner; + s->rx_csum_complete += rq_stats->csum_complete; + s->rx_csum_unnecessary_inner += rq_stats->csum_unnecessary_inner; s->rx_wqe_err += rq_stats->wqe_err; s->rx_mpwqe_filler += rq_stats->mpwqe_filler; s->rx_mpwqe_frag += rq_stats->mpwqe_frag; @@ -122,24 +122,23 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; - s->tso_packets += sq_stats->tso_packets; - s->tso_bytes += sq_stats->tso_bytes; - s->tso_inner_packets += sq_stats->tso_inner_packets; - s->tso_inner_bytes += sq_stats->tso_inner_bytes; + s->tx_tso_packets += sq_stats->tso_packets; + s->tx_tso_bytes += sq_stats->tso_bytes; + s->tx_tso_inner_packets += sq_stats->tso_inner_packets; + s->tx_tso_inner_bytes += sq_stats->tso_inner_bytes; s->tx_queue_stopped += sq_stats->stopped; s->tx_queue_wake += sq_stats->wake; s->tx_queue_dropped += sq_stats->dropped; - s->tx_csum_inner += sq_stats->csum_offload_inner; - tx_offload_none += sq_stats->csum_offload_none; + s->tx_csum_partial_inner += sq_stats->csum_partial_inner; + tx_offload_none += sq_stats->csum_none; } } /* Update calculated offload counters */ - s->tx_csum_offload = s->tx_packets - tx_offload_none - s->tx_csum_inner; - s->rx_csum_good = s->rx_packets - s->rx_csum_none - - s->rx_csum_sw; + s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; + s->rx_csum_unnecessary = s->rx_packets - s->rx_csum_none - s->rx_csum_complete; - s->link_down_events = MLX5_GET(ppcnt_reg, + s->link_down_events_phy = MLX5_GET(ppcnt_reg, priv->stats.pport.phy_counters, counter_set.phys_layer_cntrs.link_down_events); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index bd94770..022acc2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -689,7 +689,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (is_first_ethertype_ip(skb)) { skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = csum_unfold((__force __sum16)cqe->check_sum); - rq->stats.csum_sw++; + rq->stats.csum_complete++; return; } @@ -699,7 +699,7 @@ static inline void mlx5e_handle_csum(struct net_device *netdev, if (cqe_is_tunneled(cqe)) { skb->csum_level = 1; skb->encapsulation = 1; - rq->stats.csum_inner++; + rq->stats.csum_unnecessary_inner++; } return; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 83bc32b..fcd490c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -42,9 +42,11 @@ be64_to_cpu(*(__be32 *)((char *)ptr + dsc[i].offset)) #define MLX5E_DECLARE_STAT(type, fld) #fld, offsetof(type, fld) +#define MLX5E_DECLARE_RX_STAT(type, fld) "rx%d_"#fld, offsetof(type, fld) +#define MLX5E_DECLARE_TX_STAT(type, fld) "tx%d_"#fld, offsetof(type, fld) struct counter_desc { - char name[ETH_GSTRING_LEN]; + char format[ETH_GSTRING_LEN]; int offset; /* Byte offset */ }; @@ -53,18 +55,18 @@ struct mlx5e_sw_stats { u64 rx_bytes; u64 tx_packets; u64 tx_bytes; - u64 tso_packets; - u64 tso_bytes; - u64 tso_inner_packets; - u64 tso_inner_bytes; - u64 lro_packets; - u64 lro_bytes; - u64 rx_csum_good; + u64 tx_tso_packets; + u64 tx_tso_bytes; + u64 tx_tso_inner_packets; + u64 tx_tso_inner_bytes; + u64 rx_lro_packets; + u64 rx_lro_bytes; + u64 rx_csum_unnecessary; u64 rx_csum_none; - u64 rx_csum_sw; - u64 rx_csum_inner; - u64 tx_csum_offload; - u64 tx_csum_inner; + u64 rx_csum_complete; + u64 rx_csum_unnecessary_inner; + u64 tx_csum_partial; + u64 tx_csum_partial_inner; u64 tx_queue_stopped; u64 tx_queue_wake; u64 tx_queue_dropped; @@ -76,7 +78,7 @@ struct mlx5e_sw_stats { u64 rx_cqe_compress_pkts; /* Special handling counters */ - u64 link_down_events; + u64 link_down_events_phy; }; static const struct counter_desc sw_stats_desc[] = { @@ -84,18 +86,18 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_bytes) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_packets) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_good) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_tso_inner_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_packets) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_bytes) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_offload) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary_inner) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_csum_partial_inner) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_stopped) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_wake) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_dropped) }, @@ -105,7 +107,7 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_buff_alloc_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_blks) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_pkts) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, link_down_events_phy) }, }; struct mlx5e_qcounter_stats { @@ -125,12 +127,6 @@ struct mlx5e_vport_stats { }; static const struct counter_desc vport_stats_desc[] = { - { "rx_vport_error_packets", - VPORT_COUNTER_OFF(received_errors.packets) }, - { "rx_vport_error_bytes", VPORT_COUNTER_OFF(received_errors.octets) }, - { "tx_vport_error_packets", - VPORT_COUNTER_OFF(transmit_errors.packets) }, - { "tx_vport_error_bytes", VPORT_COUNTER_OFF(transmit_errors.octets) }, { "rx_vport_unicast_packets", VPORT_COUNTER_OFF(received_eth_unicast.packets) }, { "rx_vport_unicast_bytes", @@ -192,94 +188,68 @@ struct mlx5e_pport_stats { }; static const struct counter_desc pport_802_3_stats_desc[] = { - { "frames_tx", PPORT_802_3_OFF(a_frames_transmitted_ok) }, - { "frames_rx", PPORT_802_3_OFF(a_frames_received_ok) }, - { "check_seq_err", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, - { "alignment_err", PPORT_802_3_OFF(a_alignment_errors) }, - { "octets_tx", PPORT_802_3_OFF(a_octets_transmitted_ok) }, - { "octets_received", PPORT_802_3_OFF(a_octets_received_ok) }, - { "multicast_xmitted", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, - { "broadcast_xmitted", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, - { "multicast_rx", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, - { "broadcast_rx", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, - { "in_range_len_errors", PPORT_802_3_OFF(a_in_range_length_errors) }, - { "out_of_range_len", PPORT_802_3_OFF(a_out_of_range_length_field) }, - { "too_long_errors", PPORT_802_3_OFF(a_frame_too_long_errors) }, - { "symbol_err", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, - { "mac_control_tx", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, - { "mac_control_rx", PPORT_802_3_OFF(a_mac_control_frames_received) }, - { "unsupported_op_rx", - PPORT_802_3_OFF(a_unsupported_opcodes_received) }, - { "pause_ctrl_rx", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, - { "pause_ctrl_tx", - PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, + { "tx_packets_phy", PPORT_802_3_OFF(a_frames_transmitted_ok) }, + { "rx_packets_phy", PPORT_802_3_OFF(a_frames_received_ok) }, + { "rx_crc_errors_phy", PPORT_802_3_OFF(a_frame_check_sequence_errors) }, + { "tx_bytes_phy", PPORT_802_3_OFF(a_octets_transmitted_ok) }, + { "rx_bytes_phy", PPORT_802_3_OFF(a_octets_received_ok) }, + { "tx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_xmitted_ok) }, + { "tx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_xmitted_ok) }, + { "rx_multicast_phy", PPORT_802_3_OFF(a_multicast_frames_received_ok) }, + { "rx_broadcast_phy", PPORT_802_3_OFF(a_broadcast_frames_received_ok) }, + { "rx_in_range_len_errors_phy", PPORT_802_3_OFF(a_in_range_length_errors) }, + { "rx_out_of_range_len_phy", PPORT_802_3_OFF(a_out_of_range_length_field) }, + { "rx_oversize_pkts_phy", PPORT_802_3_OFF(a_frame_too_long_errors) }, + { "rx_symbol_err_phy", PPORT_802_3_OFF(a_symbol_error_during_carrier) }, + { "tx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_transmitted) }, + { "rx_mac_control_phy", PPORT_802_3_OFF(a_mac_control_frames_received) }, + { "rx_unsupported_op_phy", PPORT_802_3_OFF(a_unsupported_opcodes_received) }, + { "rx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_received) }, + { "tx_pause_ctrl_phy", PPORT_802_3_OFF(a_pause_mac_ctrl_frames_transmitted) }, }; static const struct counter_desc pport_2863_stats_desc[] = { - { "in_octets", PPORT_2863_OFF(if_in_octets) }, - { "in_ucast_pkts", PPORT_2863_OFF(if_in_ucast_pkts) }, - { "in_discards", PPORT_2863_OFF(if_in_discards) }, - { "in_errors", PPORT_2863_OFF(if_in_errors) }, - { "in_unknown_protos", PPORT_2863_OFF(if_in_unknown_protos) }, - { "out_octets", PPORT_2863_OFF(if_out_octets) }, - { "out_ucast_pkts", PPORT_2863_OFF(if_out_ucast_pkts) }, - { "out_discards", PPORT_2863_OFF(if_out_discards) }, - { "out_errors", PPORT_2863_OFF(if_out_errors) }, - { "in_multicast_pkts", PPORT_2863_OFF(if_in_multicast_pkts) }, - { "in_broadcast_pkts", PPORT_2863_OFF(if_in_broadcast_pkts) }, - { "out_multicast_pkts", PPORT_2863_OFF(if_out_multicast_pkts) }, - { "out_broadcast_pkts", PPORT_2863_OFF(if_out_broadcast_pkts) }, + { "rx_discards_phy", PPORT_2863_OFF(if_in_discards) }, + { "tx_discards_phy", PPORT_2863_OFF(if_out_discards) }, + { "tx_errors_phy", PPORT_2863_OFF(if_out_errors) }, }; static const struct counter_desc pport_2819_stats_desc[] = { - { "drop_events", PPORT_2819_OFF(ether_stats_drop_events) }, - { "octets", PPORT_2819_OFF(ether_stats_octets) }, - { "pkts", PPORT_2819_OFF(ether_stats_pkts) }, - { "broadcast_pkts", PPORT_2819_OFF(ether_stats_broadcast_pkts) }, - { "multicast_pkts", PPORT_2819_OFF(ether_stats_multicast_pkts) }, - { "crc_align_errors", PPORT_2819_OFF(ether_stats_crc_align_errors) }, - { "undersize_pkts", PPORT_2819_OFF(ether_stats_undersize_pkts) }, - { "oversize_pkts", PPORT_2819_OFF(ether_stats_oversize_pkts) }, - { "fragments", PPORT_2819_OFF(ether_stats_fragments) }, - { "jabbers", PPORT_2819_OFF(ether_stats_jabbers) }, - { "collisions", PPORT_2819_OFF(ether_stats_collisions) }, - { "p64octets", PPORT_2819_OFF(ether_stats_pkts64octets) }, - { "p65to127octets", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, - { "p128to255octets", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, - { "p256to511octets", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, - { "p512to1023octets", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, - { "p1024to1518octets", - PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, - { "p1519to2047octets", - PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, - { "p2048to4095octets", - PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, - { "p4096to8191octets", - PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, - { "p8192to10239octets", - PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, + { "rx_undersize_pkts_phy", PPORT_2819_OFF(ether_stats_undersize_pkts) }, + { "rx_fragments_phy", PPORT_2819_OFF(ether_stats_fragments) }, + { "rx_jabbers_phy", PPORT_2819_OFF(ether_stats_jabbers) }, + { "rx_64_bytes_phy", PPORT_2819_OFF(ether_stats_pkts64octets) }, + { "rx_65_to_127_bytes_phy", PPORT_2819_OFF(ether_stats_pkts65to127octets) }, + { "rx_128_to_255_bytes_phy", PPORT_2819_OFF(ether_stats_pkts128to255octets) }, + { "rx_256_to_511_bytes_phy", PPORT_2819_OFF(ether_stats_pkts256to511octets) }, + { "rx_512_to_1023_bytes_phy", PPORT_2819_OFF(ether_stats_pkts512to1023octets) }, + { "rx_1024_to_1518_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1024to1518octets) }, + { "rx_1519_to_2047_bytes_phy", PPORT_2819_OFF(ether_stats_pkts1519to2047octets) }, + { "rx_2048_to_4095_bytes_phy", PPORT_2819_OFF(ether_stats_pkts2048to4095octets) }, + { "rx_4096_to_8191_bytes_phy", PPORT_2819_OFF(ether_stats_pkts4096to8191octets) }, + { "rx_8192_to_10239_bytes_phy", PPORT_2819_OFF(ether_stats_pkts8192to10239octets) }, }; static const struct counter_desc pport_per_prio_traffic_stats_desc[] = { - { "rx_octets", PPORT_PER_PRIO_OFF(rx_octets) }, - { "rx_frames", PPORT_PER_PRIO_OFF(rx_frames) }, - { "tx_octets", PPORT_PER_PRIO_OFF(tx_octets) }, - { "tx_frames", PPORT_PER_PRIO_OFF(tx_frames) }, + { "rx_prio%d_bytes", PPORT_PER_PRIO_OFF(rx_octets) }, + { "rx_prio%d_packets", PPORT_PER_PRIO_OFF(rx_frames) }, + { "tx_prio%d_bytes", PPORT_PER_PRIO_OFF(tx_octets) }, + { "tx_prio%d_packets", PPORT_PER_PRIO_OFF(tx_frames) }, }; static const struct counter_desc pport_per_prio_pfc_stats_desc[] = { - { "rx_pause", PPORT_PER_PRIO_OFF(rx_pause) }, - { "rx_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, - { "tx_pause", PPORT_PER_PRIO_OFF(tx_pause) }, - { "tx_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, - { "rx_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, + { "rx_prio%d_pause", PPORT_PER_PRIO_OFF(rx_pause) }, + { "rx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(rx_pause_duration) }, + { "tx_prio%d_pause", PPORT_PER_PRIO_OFF(tx_pause) }, + { "tx_prio%d_pause_duration", PPORT_PER_PRIO_OFF(tx_pause_duration) }, + { "rx_prio%d_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) }, }; struct mlx5e_rq_stats { u64 packets; u64 bytes; - u64 csum_sw; - u64 csum_inner; + u64 csum_complete; + u64 csum_unnecessary_inner; u64 csum_none; u64 lro_packets; u64 lro_bytes; @@ -292,19 +262,19 @@ struct mlx5e_rq_stats { }; static const struct counter_desc rq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_sw) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, csum_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, lro_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, wqe_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, - { MLX5E_DECLARE_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_unnecessary_inner) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_none) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_packets) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_bytes) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, wqe_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_frag) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, }; struct mlx5e_sq_stats { @@ -315,28 +285,28 @@ struct mlx5e_sq_stats { u64 tso_bytes; u64 tso_inner_packets; u64 tso_inner_bytes; - u64 csum_offload_inner; + u64 csum_partial_inner; u64 nop; /* less likely accessed in data path */ - u64 csum_offload_none; + u64 csum_none; u64 stopped; u64 wake; u64 dropped; }; static const struct counter_desc sq_stats_desc[] = { - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_inner) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, nop) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, csum_offload_none) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, stopped) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, wake) }, - { MLX5E_DECLARE_STAT(struct mlx5e_sq_stats, dropped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_packets) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, tso_inner_bytes) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_partial_inner) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, nop) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, csum_none) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, stopped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, wake) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, dropped) }, }; #define NUM_SW_COUNTERS ARRAY_SIZE(sw_stats_desc) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index b000ddc..5a750b9cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -192,12 +192,12 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) if (skb->encapsulation) { eseg->cs_flags |= MLX5_ETH_WQE_L3_INNER_CSUM | MLX5_ETH_WQE_L4_INNER_CSUM; - sq->stats.csum_offload_inner++; + sq->stats.csum_partial_inner++; } else { eseg->cs_flags |= MLX5_ETH_WQE_L4_CSUM; } } else - sq->stats.csum_offload_none++; + sq->stats.csum_none++; if (sq->cc != sq->prev_cc) { sq->prev_cc = sq->cc; -- cgit v0.10.2 From 3f4c68cfde30caa1f6d8368fd19590671411ade2 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:02 +0530 Subject: net: thunderx: Fix link status reporting Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham Signed-off-by: Tao Wang Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 3ed2198..63a39ac 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -551,7 +551,9 @@ static int bgx_xaui_check_link(struct lmac *lmac) } /* Clear rcvflt bit (latching high) and read it back */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); + if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); if (bgx->use_training) { @@ -570,13 +572,6 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - /* Wait for MAC RX to be ready */ - if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_RX_CTL, - SMU_RX_CTL_STATUS, true)) { - dev_err(&bgx->pdev->dev, "SMU RX link not okay\n"); - return -1; - } - /* Wait for BGX RX to be idle */ if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); @@ -589,29 +584,30 @@ static int bgx_xaui_check_link(struct lmac *lmac) return -1; } - if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { - dev_err(&bgx->pdev->dev, "Receive fault\n"); - return -1; - } - - /* Receive link is latching low. Force it high and verify it */ - bgx_reg_modify(bgx, lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK); - if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_STATUS1, - SPU_STATUS1_RCV_LNK, false)) { - dev_err(&bgx->pdev->dev, "SPU receive link down\n"); - return -1; - } - + /* Clear receive packet disable */ cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); cfg &= ~SPU_MISC_CTL_RX_DIS; bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); - return 0; + + /* Check for MAC RX faults */ + cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL); + /* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */ + cfg &= SMU_RX_CTL_STATUS; + if (!cfg) + return 0; + + /* Rx local/remote fault seen. + * Do lmac reinit to see if condition recovers + */ + bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type); + + return -1; } static void bgx_poll_for_link(struct work_struct *work) { struct lmac *lmac; - u64 link; + u64 spu_link, smu_link; lmac = container_of(work, struct lmac, dwork.work); @@ -621,8 +617,11 @@ static void bgx_poll_for_link(struct work_struct *work) bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK, false); - link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); - if (link & SPU_STATUS1_RCV_LNK) { + spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); + smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL); + + if ((spu_link & SPU_STATUS1_RCV_LNK) && + !(smu_link & SMU_RX_CTL_STATUS)) { lmac->link_up = 1; if (lmac->bgx->lmac_type == BGX_MODE_XLAUI) lmac->last_speed = 40000; @@ -636,9 +635,15 @@ static void bgx_poll_for_link(struct work_struct *work) } if (lmac->last_link != lmac->link_up) { + if (lmac->link_up) { + if (bgx_xaui_check_link(lmac)) { + /* Errors, clear link_up state */ + lmac->link_up = 0; + lmac->last_speed = SPEED_UNKNOWN; + lmac->last_duplex = DUPLEX_UNKNOWN; + } + } lmac->last_link = lmac->link_up; - if (lmac->link_up) - bgx_xaui_check_link(lmac); } queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); @@ -710,7 +715,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) { struct lmac *lmac; - u64 cmrx_cfg; + u64 cfg; lmac = &bgx->lmac[lmacid]; if (lmac->check_link) { @@ -719,9 +724,33 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) destroy_workqueue(lmac->check_link); } - cmrx_cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); - cmrx_cfg &= ~(1 << 15); - bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cmrx_cfg); + /* Disable packet reception */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_RX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Give chance for Rx/Tx FIFO to get drained */ + bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true); + bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true); + + /* Disable packet transmission */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_PKT_TX_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + + /* Disable serdes lanes */ + if (!lmac->is_sgmii) + bgx_reg_modify(bgx, lmacid, + BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); + else + bgx_reg_modify(bgx, lmacid, + BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN); + + /* Disable LMAC */ + cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); + cfg &= ~CMR_EN; + bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); + bgx_flush_dmac_addrs(bgx, lmacid); if ((bgx->lmac_type != BGX_MODE_XFI) && diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h index 149e179..42010d2 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h @@ -41,6 +41,7 @@ #define BGX_CMRX_RX_STAT10 0xC0 #define BGX_CMRX_RX_BP_DROP 0xC8 #define BGX_CMRX_RX_DMAC_CTL 0x0E8 +#define BGX_CMRX_RX_FIFO_LEN 0x108 #define BGX_CMR_RX_DMACX_CAM 0x200 #define RX_DMACX_CAM_EN BIT_ULL(48) #define RX_DMACX_CAM_LMACID(x) (x << 49) @@ -50,6 +51,7 @@ #define BGX_CMR_CHAN_MSK_AND 0x450 #define BGX_CMR_BIST_STATUS 0x460 #define BGX_CMR_RX_LMACS 0x468 +#define BGX_CMRX_TX_FIFO_LEN 0x518 #define BGX_CMRX_TX_STAT0 0x600 #define BGX_CMRX_TX_STAT1 0x608 #define BGX_CMRX_TX_STAT2 0x610 -- cgit v0.10.2 From 3e29adba567306504e99b8363edf2d47c19dbe1b Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Mon, 27 Jun 2016 15:30:03 +0530 Subject: net: thunderx: Fix TL4 configuration for secondary Qsets TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 95f17f8..16ed203 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -499,6 +499,7 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, u32 rr_quantum; u8 sq_idx = sq->sq_num; u8 pqs_vnic; + int svf; if (sq->sqs_mode) pqs_vnic = nic->pqs_vf[vnic]; @@ -511,10 +512,19 @@ static void nic_tx_channel_cfg(struct nicpf *nic, u8 vnic, /* 24 bytes for FCS, IPG and preamble */ rr_quantum = ((NIC_HW_MAX_FRS + 24) / 4); - tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + if (!sq->sqs_mode) { + tl4 = (lmac * NIC_TL4_PER_LMAC) + (bgx * NIC_TL4_PER_BGX); + } else { + for (svf = 0; svf < MAX_SQS_PER_VF; svf++) { + if (nic->vf_sqs[pqs_vnic][svf] == vnic) + break; + } + tl4 = (MAX_LMAC_PER_BGX * NIC_TL4_PER_LMAC); + tl4 += (lmac * NIC_TL4_PER_LMAC * MAX_SQS_PER_VF); + tl4 += (svf * NIC_TL4_PER_LMAC); + tl4 += (bgx * NIC_TL4_PER_BGX); + } tl4 += sq_idx; - if (sq->sqs_mode) - tl4 += vnic * 8; tl3 = tl4 / (NIC_MAX_TL4 / NIC_MAX_TL3); nic_reg_write(nic, NIC_PF_QSET_0_127_SQ_0_7_CFG2 | -- cgit v0.10.2 From 42482b4546336ecd93acdd95e435bafd7a4c581c Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 23 Jun 2016 14:50:35 -0700 Subject: drm/i915: Add more Kabylake PCI IDs. The spec has been updated adding new PCI IDs. Signed-off-by: Rodrigo Vivi Reviewed-by: Dhinakaran Pandiyan Link: http://patchwork.freedesktop.org/patch/msgid/1466718636-19675-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 33d9391d3020e069dca98fa87a604c037beb2b9e) Signed-off-by: Jani Nikula diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 9094599..87dde1c 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -309,6 +309,7 @@ INTEL_VGA_DEVICE(0x5906, info), /* ULT GT1 */ \ INTEL_VGA_DEVICE(0x590E, info), /* ULX GT1 */ \ INTEL_VGA_DEVICE(0x5902, info), /* DT GT1 */ \ + INTEL_VGA_DEVICE(0x5908, info), /* Halo GT1 */ \ INTEL_VGA_DEVICE(0x590B, info), /* Halo GT1 */ \ INTEL_VGA_DEVICE(0x590A, info) /* SRV GT1 */ @@ -322,7 +323,9 @@ INTEL_VGA_DEVICE(0x591D, info) /* WKS GT2 */ #define INTEL_KBL_GT3_IDS(info) \ + INTEL_VGA_DEVICE(0x5923, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x5926, info), /* ULT GT3 */ \ + INTEL_VGA_DEVICE(0x5927, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x592B, info), /* Halo GT3 */ \ INTEL_VGA_DEVICE(0x592A, info) /* SRV GT3 */ -- cgit v0.10.2 From 6b9dc6a474fd4e025c615ed4582735360005727c Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 23 Jun 2016 14:50:36 -0700 Subject: drm/i915: Removing PCI IDs that are no longer listed as Kabylake. This is unusual. Usually IDs listed on early stages of platform definition are kept there as reserved for later use. However these IDs here are not listed anymore in any of steppings and devices IDs tables for Kabylake on configurations overview section of BSpec. So it is better removing them before they become used in any other future platform. Signed-off-by: Rodrigo Vivi Reviewed-by: Dhinakaran Pandiyan Link: http://patchwork.freedesktop.org/patch/msgid/1466718636-19675-2-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit a922eb8d4581c883c37ce6e12dca9ff2cb1ea723) Signed-off-by: Jani Nikula diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 87dde1c..33466bf 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -325,15 +325,10 @@ #define INTEL_KBL_GT3_IDS(info) \ INTEL_VGA_DEVICE(0x5923, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x5926, info), /* ULT GT3 */ \ - INTEL_VGA_DEVICE(0x5927, info), /* ULT GT3 */ \ - INTEL_VGA_DEVICE(0x592B, info), /* Halo GT3 */ \ - INTEL_VGA_DEVICE(0x592A, info) /* SRV GT3 */ + INTEL_VGA_DEVICE(0x5927, info) /* ULT GT3 */ #define INTEL_KBL_GT4_IDS(info) \ - INTEL_VGA_DEVICE(0x5932, info), /* DT GT4 */ \ - INTEL_VGA_DEVICE(0x593B, info), /* Halo GT4 */ \ - INTEL_VGA_DEVICE(0x593A, info), /* SRV GT4 */ \ - INTEL_VGA_DEVICE(0x593D, info) /* WKS GT4 */ + INTEL_VGA_DEVICE(0x593B, info) /* Halo GT4 */ #define INTEL_KBL_IDS(info) \ INTEL_KBL_GT1_IDS(info), \ -- cgit v0.10.2 From 96183182ad05d1ce31b9048921c12bf4ad621eaf Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Jun 2016 20:48:53 +0800 Subject: ibmvnic: fix to use list_for_each_safe() when delete items Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 864cb21..ecdb685 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2121,7 +2121,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, struct ibmvnic_adapter *adapter) { struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp; unsigned long flags; bool found = false; int i; @@ -2133,7 +2133,7 @@ static void handle_error_info_rsp(union ibmvnic_crq *crq, } spin_lock_irqsave(&adapter->error_list_lock, flags); - list_for_each_entry(error_buff, &adapter->errors, list) + list_for_each_entry_safe(error_buff, tmp, &adapter->errors, list) if (error_buff->error_id == crq->request_error_rsp.error_id) { found = true; list_del(&error_buff->list); @@ -3141,14 +3141,14 @@ static void handle_request_ras_comp_num_rsp(union ibmvnic_crq *crq, static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) { - struct ibmvnic_inflight_cmd *inflight_cmd; + struct ibmvnic_inflight_cmd *inflight_cmd, *tmp1; struct device *dev = &adapter->vdev->dev; - struct ibmvnic_error_buff *error_buff; + struct ibmvnic_error_buff *error_buff, *tmp2; unsigned long flags; unsigned long flags2; spin_lock_irqsave(&adapter->inflight_lock, flags); - list_for_each_entry(inflight_cmd, &adapter->inflight, list) { + list_for_each_entry_safe(inflight_cmd, tmp1, &adapter->inflight, list) { switch (inflight_cmd->crq.generic.cmd) { case LOGIN: dma_unmap_single(dev, adapter->login_buf_token, @@ -3165,8 +3165,8 @@ static void ibmvnic_free_inflight(struct ibmvnic_adapter *adapter) break; case REQUEST_ERROR_INFO: spin_lock_irqsave(&adapter->error_list_lock, flags2); - list_for_each_entry(error_buff, &adapter->errors, - list) { + list_for_each_entry_safe(error_buff, tmp2, + &adapter->errors, list) { dma_unmap_single(dev, error_buff->dma, error_buff->len, DMA_FROM_DEVICE); -- cgit v0.10.2 From a3d2e9f8eb1487f4191ff08ce2d3d63702c65a90 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 27 Jun 2016 17:38:50 +0200 Subject: tcp: do not send too big packets at retransmit time Arjun reported a bug in TCP stack and bisected it to a recent commit. In case where we process SACK, we can coalesce multiple skbs into fat ones (tcp_shift_skb_data()), to lower write queue overhead, because we do not expect to retransmit these packets. However, SACK reneging can happen, forcing the sender to retransmit all these packets. If skb->len is above 64KB, we then send buggy IP packets that could hang TSO engine on cxgb4. Neal suggested to use tcp_tso_autosize() instead of tp->gso_segs so that we cook packets of optimal size vs TCP/pacing. Thanks to Arjun for reporting the bug and running the tests ! Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Eric Dumazet Reported-by: Arjun V Tested-by: Arjun V Acked-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 8bd9911..e00e972 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2751,7 +2751,7 @@ void tcp_xmit_retransmit_queue(struct sock *sk) struct tcp_sock *tp = tcp_sk(sk); struct sk_buff *skb; struct sk_buff *hole = NULL; - u32 last_lost; + u32 max_segs, last_lost; int mib_idx; int fwd_rexmitting = 0; @@ -2771,6 +2771,7 @@ void tcp_xmit_retransmit_queue(struct sock *sk) last_lost = tp->snd_una; } + max_segs = tcp_tso_autosize(sk, tcp_current_mss(sk)); tcp_for_write_queue_from(skb, sk) { __u8 sacked = TCP_SKB_CB(skb)->sacked; int segs; @@ -2784,6 +2785,10 @@ void tcp_xmit_retransmit_queue(struct sock *sk) segs = tp->snd_cwnd - tcp_packets_in_flight(tp); if (segs <= 0) return; + /* In case tcp_shift_skb_data() have aggregated large skbs, + * we need to make sure not sending too bigs TSO packets + */ + segs = min_t(int, segs, max_segs); if (fwd_rexmitting) { begin_fwd: -- cgit v0.10.2 From 565ce8f32ac4a233b474f401e1d3e7e1de0a31fd Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Mon, 27 Jun 2016 18:34:42 +0200 Subject: net: bridge: fix vlan stats continue counter I made a dumb off-by-one mistake when I added the vlan stats counter dumping code. The increment should happen before the check, not after otherwise we miss one entry when we continue dumping. Fixes: a60c090361ea ("bridge: netlink: export per-vlan stats") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index a5343c7..85e89f6 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -1273,7 +1273,7 @@ static int br_fill_linkxstats(struct sk_buff *skb, const struct net_device *dev, struct bridge_vlan_xstats vxi; struct br_vlan_stats stats; - if (vl_idx++ < *prividx) + if (++vl_idx < *prividx) continue; memset(&vxi, 0, sizeof(vxi)); vxi.vid = v->vid; -- cgit v0.10.2 From ceb56070359b7329b5678b5d95a376fcb24767be Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Jun 2016 21:38:11 +0200 Subject: bpf, perf: delay release of BPF prog after grace period Commit dead9f29ddcc ("perf: Fix race in BPF program unregister") moved destruction of BPF program from free_event_rcu() callback to __free_event(), which is problematic if used with tail calls: if prog A is attached as trace event directly, but at the same time present in a tail call map used by another trace event program elsewhere, then we need to delay destruction via RCU grace period since it can still be in use by the program doing the tail call (the prog first needs to be dropped from the tail call map, then trace event with prog A attached destroyed, so we get immediate destruction). Fixes: dead9f29ddcc ("perf: Fix race in BPF program unregister") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Cc: Jann Horn Signed-off-by: David S. Miller diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 8269caf..0de4de6 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -264,6 +264,10 @@ static inline struct bpf_prog *bpf_prog_get(u32 ufd) static inline void bpf_prog_put(struct bpf_prog *prog) { } + +static inline void bpf_prog_put_rcu(struct bpf_prog *prog) +{ +} #endif /* CONFIG_BPF_SYSCALL */ /* verifier prototypes for helper functions called from eBPF programs */ diff --git a/kernel/events/core.c b/kernel/events/core.c index 274450e..d00c47b 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7531,7 +7531,7 @@ static void perf_event_free_bpf_prog(struct perf_event *event) prog = event->tp_event->prog; if (prog) { event->tp_event->prog = NULL; - bpf_prog_put(prog); + bpf_prog_put_rcu(prog); } } -- cgit v0.10.2 From 5b4d10f5e0369ed79434593b7cd8e85eebbe473f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 27 Jun 2016 23:50:29 +0300 Subject: qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 7bd6f25..607bb7d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -2220,7 +2220,7 @@ void qlcnic_83xx_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring) if (!opcode) return; - ring = QLCNIC_FETCH_RING_ID(qlcnic_83xx_hndl(sts_data[0])); + ring = QLCNIC_FETCH_RING_ID(sts_data[0]); qlcnic_83xx_process_rcv_diag(adapter, ring, sts_data); desc = &sds_ring->desc_head[consumer]; desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM); -- cgit v0.10.2 From 6858107e78b4ecb9f244db814ffbdba1b5ce759b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 29 Jun 2016 10:27:52 +0530 Subject: ALSA: hda - Add PCI ID for Kabylake-H Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this earlier with other KBL IDs. Signed-off-by: Vinod Koul Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 94089fc..e320c44 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -367,9 +367,10 @@ enum { #define IS_SKL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d70) #define IS_KBL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa171) #define IS_KBL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d71) +#define IS_KBL_H(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa2f0) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) #define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) || \ - IS_KBL(pci) || IS_KBL_LP(pci) + IS_KBL(pci) || IS_KBL_LP(pci) || IS_KBL_H(pci) static char *driver_short_names[] = { [AZX_DRIVER_ICH] = "HDA Intel", @@ -2190,6 +2191,9 @@ static const struct pci_device_id azx_ids[] = { /* Kabylake-LP */ { PCI_DEVICE(0x8086, 0x9d71), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE }, + /* Kabylake-H */ + { PCI_DEVICE(0x8086, 0xa2f0), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE }, /* Broxton-P(Apollolake) */ { PCI_DEVICE(0x8086, 0x5a98), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON }, -- cgit v0.10.2 From c041778c966c92c964033f1cdfee60a9f2b5e465 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 29 Jun 2016 10:36:39 +0200 Subject: cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header The PDU length of incoming LLC frames is set to the total skb payload size in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly includes the length of the IEEE 802.11 header. The resulting LLC frame header has a too large PDU length, causing the llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming skb, effectively breaking STP. Solve the problem by properly substracting the IEEE 802.11 frame header size from the PDU length, allowing the LLC processor to pick up the incoming control messages. Special thanks to Gerry Rozema for tracking down the regression and proposing a suitable patch. Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer") Cc: stable@vger.kernel.org Reported-by: Gerry Rozema Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index 4e809e9..2443ee3 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -509,7 +509,7 @@ static int __ieee80211_data_to_8023(struct sk_buff *skb, struct ethhdr *ehdr, * replace EtherType */ hdrlen += ETH_ALEN + 2; else - tmp.h_proto = htons(skb->len); + tmp.h_proto = htons(skb->len - hdrlen); pskb_pull(skb, hdrlen); -- cgit v0.10.2 From 889ad4566604610804df984e1a3dd5e2c66256e5 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 28 Jun 2016 20:41:31 -0700 Subject: e1000e: keep VLAN interfaces functional after rxvlan off I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 75e6089..73f7452 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -154,6 +154,16 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) writel(val, hw->hw_addr + reg); } +static bool e1000e_vlan_used(struct e1000_adapter *adapter) +{ + u16 vid; + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + return true; + + return false; +} + /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure @@ -2789,7 +2799,7 @@ static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) } /** - * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping + * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) @@ -3443,7 +3453,8 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX || + e1000e_vlan_used(adapter)) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); -- cgit v0.10.2 From b560f03ddfb072bca65e9440ff0dc4f9b1d1f056 Mon Sep 17 00:00:00 2001 From: David Barroso Date: Tue, 28 Jun 2016 11:16:43 +0300 Subject: neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit() neigh_xmit() expects to be called inside an RCU-bh read side critical section, and while one of its two current callers gets this right, the other one doesn't. More specifically, neigh_xmit() has two callers, mpls_forward() and mpls_output(), and while both callers call neigh_xmit() under rcu_read_lock(), this provides sufficient protection for neigh_xmit() only in the case of mpls_forward(), as that is always called from softirq context and therefore doesn't need explicit BH protection, while mpls_output() can be called from process context with softirqs enabled. When mpls_output() is called from process context, with softirqs enabled, we can be preempted by a softirq at any time, and RCU-bh considers the completion of a softirq as signaling the end of any pending read-side critical sections, so if we do get a softirq while we are in the part of neigh_xmit() that expects to be run inside an RCU-bh read side critical section, we can end up with an unexpected RCU grace period running right in the middle of that critical section, making things go boom. This patch fixes this impedance mismatch in the callee, by making neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that expects to be treated as an RCU-bh read side critical section, as this seems a safer option than fixing it in the callers. Fixes: 4fd3d7d9e868f ("neigh: Add helper function neigh_xmit") Signed-off-by: David Barroso Signed-off-by: Lennert Buytenhek Acked-by: David Ahern Acked-by: Robert Shearman Signed-off-by: David S. Miller diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 29dd8cc..510cd62 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2469,13 +2469,17 @@ int neigh_xmit(int index, struct net_device *dev, tbl = neigh_tables[index]; if (!tbl) goto out; + rcu_read_lock_bh(); neigh = __neigh_lookup_noref(tbl, addr, dev); if (!neigh) neigh = __neigh_create(tbl, addr, dev, false); err = PTR_ERR(neigh); - if (IS_ERR(neigh)) + if (IS_ERR(neigh)) { + rcu_read_unlock_bh(); goto out_kfree_skb; + } err = neigh->output(neigh, skb); + rcu_read_unlock_bh(); } else if (index == NEIGH_LINK_TABLE) { err = dev_hard_header(skb, dev, ntohs(skb->protocol), -- cgit v0.10.2 From 34c7bb4705a0a2d344b0c82eaf3d3bfa2bc9da45 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 28 Jun 2016 07:46:03 -0400 Subject: qed: Protect the doorbell BAR with the write barriers. SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index 67d9893..b122f60 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -213,19 +213,15 @@ static int qed_spq_hw_post(struct qed_hwfn *p_hwfn, SET_FIELD(db.params, CORE_DB_DATA_AGG_VAL_SEL, DQ_XCM_CORE_SPQ_PROD_CMD); db.agg_flags = DQ_XCM_CORE_DQ_CF_CMD; - - /* validate producer is up to-date */ - rmb(); - db.spq_prod = cpu_to_le16(qed_chain_get_prod_idx(p_chain)); - /* do not reorder */ - barrier(); + /* make sure the SPQE is updated before the doorbell */ + wmb(); DOORBELL(p_hwfn, qed_db_addr(p_spq->cid, DQ_DEMS_LEGACY), *(u32 *)&db); /* make sure doorbell is rang */ - mmiowb(); + wmb(); DP_VERBOSE(p_hwfn, QED_MSG_SPQ, "Doorbelled [0x%08x, CID 0x%08x] with Flags: %02x agg_params: %02x, prod: %04x\n", -- cgit v0.10.2 From d913d3a763a6f66a862a6eafcf6da89a7905832a Mon Sep 17 00:00:00 2001 From: Samuel Gauthier Date: Tue, 28 Jun 2016 17:22:26 +0200 Subject: openvswitch: fix conntrack netlink event delivery Only the first and last netlink message for a particular conntrack are actually sent. The first message is sent through nf_conntrack_confirm when the conntrack is committed. The last one is sent when the conntrack is destroyed on timeout. The other conntrack state change messages are not advertised. When the conntrack subsystem is used from netfilter, nf_conntrack_confirm is called for each packet, from the postrouting hook, which in turn calls nf_ct_deliver_cached_events to send the state change netlink messages. This commit fixes the problem by calling nf_ct_deliver_cached_events in the non-commit case as well. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") CC: Joe Stringer CC: Justin Pettit CC: Andy Zhou CC: Thomas Graf Signed-off-by: Samuel Gauthier Acked-by: Joe Stringer Signed-off-by: David S. Miller diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 3d5feed..d843125 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -818,8 +818,18 @@ static int ovs_ct_lookup(struct net *net, struct sw_flow_key *key, */ state = OVS_CS_F_TRACKED | OVS_CS_F_NEW | OVS_CS_F_RELATED; __ovs_ct_update_key(key, state, &info->zone, exp->master); - } else - return __ovs_ct_lookup(net, key, info, skb); + } else { + struct nf_conn *ct; + int err; + + err = __ovs_ct_lookup(net, key, info, skb); + if (err) + return err; + + ct = (struct nf_conn *)skb->nfct; + if (ct) + nf_ct_deliver_cached_events(ct); + } return 0; } -- cgit v0.10.2 From 62db7152c924e4c060e42b34a69cd39658e8a0dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 29 Jun 2016 15:23:08 +0200 Subject: ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift() vortex_wtdma_bufshift() function does calculate the page index wrongly, first masking then shift, which always results in zero. The proper computation is to first shift, then mask. Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c index 4a054d7..d3125c1 100644 --- a/sound/pci/au88x0/au88x0_core.c +++ b/sound/pci/au88x0/au88x0_core.c @@ -1444,9 +1444,8 @@ static int vortex_wtdma_bufshift(vortex_t * vortex, int wtdma) int page, p, pp, delta, i; page = - (hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2)) & - WT_SUBBUF_MASK) - >> WT_SUBBUF_SHIFT; + (hwread(vortex->mmio, VORTEX_WTDMA_STAT + (wtdma << 2)) + >> WT_SUBBUF_SHIFT) & WT_SUBBUF_MASK; if (dma->nr_periods >= 4) delta = (page - dma->period_real) & 3; else { -- cgit v0.10.2 From 03bea60409328de54e4ff7ec41672e12a9cb0908 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 29 Jun 2016 16:03:55 +0200 Subject: ovl: get_write_access() in truncate When truncating a file we should check write access on the underlying inode. And we should do so on the lower file as well (before copy-up) for consistency. Original patch and test case by Aihua Zhang. - - >o >o - - test.c - - >o >o - - #include #include #include int main(int argc, char *argv[]) { int ret; ret = truncate(argv[0], 4096); if (ret != -1) { fprintf(stderr, "truncate(argv[0]) should have failed\n"); return 1; } if (errno != ETXTBSY) { perror("truncate(argv[0])"); return 1; } return 0; } - - >o >o - - >o >o - - >o >o - - Reported-by: Aihua Zhang Signed-off-by: Miklos Szeredi Cc: diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index 8514d69..c831c2e 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -59,16 +59,37 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr) if (err) goto out; + if (attr->ia_valid & ATTR_SIZE) { + struct inode *realinode = d_inode(ovl_dentry_real(dentry)); + + err = -ETXTBSY; + if (atomic_read(&realinode->i_writecount) < 0) + goto out_drop_write; + } + err = ovl_copy_up(dentry); if (!err) { + struct inode *winode = NULL; + upperdentry = ovl_dentry_upper(dentry); + if (attr->ia_valid & ATTR_SIZE) { + winode = d_inode(upperdentry); + err = get_write_access(winode); + if (err) + goto out_drop_write; + } + inode_lock(upperdentry->d_inode); err = notify_change(upperdentry, attr, NULL); if (!err) ovl_copyattr(upperdentry->d_inode, dentry->d_inode); inode_unlock(upperdentry->d_inode); + + if (winode) + put_write_access(winode); } +out_drop_write: ovl_drop_write(dentry); out: return err; -- cgit v0.10.2 From 3a8bd717ee3e0508fc0dd517b97e950989e15f8c Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 14:46:47 +0800 Subject: drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d23dcce..d15584c 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2924,6 +2924,31 @@ static int polaris10_set_private_data_based_on_pptable(struct pp_hwmgr *hwmgr) return 0; } +int polaris10_patch_voltage_workaround(struct pp_hwmgr *hwmgr) +{ + struct phm_ppt_v1_information *table_info = + (struct phm_ppt_v1_information *)(hwmgr->pptable); + struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table = + table_info->vdd_dep_on_mclk; + struct phm_ppt_v1_voltage_lookup_table *lookup_table = + table_info->vddc_lookup_table; + uint32_t i; + + if (hwmgr->chip_id == CHIP_POLARIS10 && hwmgr->hw_revision == 0xC7) { + if (lookup_table->entries[dep_mclk_table->entries[dep_mclk_table->count-1].vddInd].us_vdd >= 1000) + return 0; + + for (i = 0; i < lookup_table->count; i++) { + if (lookup_table->entries[i].us_vdd < 0xff01 && lookup_table->entries[i].us_vdd >= 1000) { + dep_mclk_table->entries[dep_mclk_table->count-1].vddInd = (uint8_t) i; + return 0; + } + } + } + return 0; +} + + int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); @@ -3001,6 +3026,7 @@ int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) polaris10_set_features_platform_caps(hwmgr); + polaris10_patch_voltage_workaround(hwmgr); polaris10_init_dpm_defaults(hwmgr); /* Get leakage voltage based on leakage ID. */ -- cgit v0.10.2 From 0636e0d666e0238fa22348172c20a49f42a94395 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 27 Jun 2016 17:30:24 +0800 Subject: drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. 1. Populate correct value of VDDCI voltage for SMC SAMU, VCE, and UVD levels depending on whether VDDCi control is SVI2 or GPIO. 2. Populate SMC ACPI minimum voltage using VBIOS boot SCLK and MCLK When static voltage is configured as VDDCI, driver still tries to program a voltage for MM minVoltage using VDDC-VDDCI delta requirement. minVoltage should be set as boot up voltage. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index d15584c..ec2a7ad 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -1423,22 +1423,19 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC; - if (!data->sclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, - * already converted to SMC_UL */ - sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_sclk, - table->ACPILevel.SclkFrequency, - &table->ACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDC voltage value " - "in Clock Dependency Table", ); - } else { - sclk_frequency = data->vbios_boot_state.sclk_bootup_value; - table->ACPILevel.MinVoltage = - data->vbios_boot_state.vddc_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, + * already converted to SMC_UL */ + sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_sclk, + sclk_frequency, + &table->ACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDC voltage value " + "in Clock Dependency Table", + ); + result = polaris10_calculate_sclk_params(hwmgr, sclk_frequency, &(table->ACPILevel.SclkSetting)); PP_ASSERT_WITH_CODE(result == 0, "Error retrieving Engine Clock dividers from VBIOS.", return result); @@ -1463,24 +1460,18 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Fcw1_frac); CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Sclk_ss_slew_rate); - if (!data->mclk_dpm_key_disabled) { - /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ - table->MemoryACPILevel.MclkFrequency = - data->dpm_table.mclk_table.dpm_levels[0].value; - result = polaris10_get_dependency_volt_by_clk(hwmgr, - table_info->vdd_dep_on_mclk, - table->MemoryACPILevel.MclkFrequency, - &table->MemoryACPILevel.MinVoltage, &mvdd); - PP_ASSERT_WITH_CODE((0 == result), - "Cannot find ACPI VDDCI voltage value " - "in Clock Dependency Table", - ); - } else { - table->MemoryACPILevel.MclkFrequency = - data->vbios_boot_state.mclk_bootup_value; - table->MemoryACPILevel.MinVoltage = - data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE; - } + + /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */ + table->MemoryACPILevel.MclkFrequency = + data->dpm_table.mclk_table.dpm_levels[0].value; + result = polaris10_get_dependency_volt_by_clk(hwmgr, + table_info->vdd_dep_on_mclk, + table->MemoryACPILevel.MclkFrequency, + &table->MemoryACPILevel.MinVoltage, &mvdd); + PP_ASSERT_WITH_CODE((0 == result), + "Cannot find ACPI VDDCI voltage value " + "in Clock Dependency Table", + ); us_mvdd = 0; if ((POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) || @@ -1525,6 +1516,7 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->VceLevelCount = (uint8_t)(mm_table->count); table->VceBootLevel = 0; @@ -1534,9 +1526,18 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr, table->VceLevel[count].MinVoltage = 0; table->VceLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->VceLevel[count].MinVoltage |= - ((mm_table->entries[count].vddc - data->vddc_vddci_delta) * - VOLTAGE_SCALE) << VDDCI_SHIFT; + (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->VceLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /*retrieve divider value for VBIOS */ @@ -1565,6 +1566,7 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->SamuBootLevel = 0; table->SamuLevelCount = (uint8_t)(mm_table->count); @@ -1575,8 +1577,16 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr, table->SamuLevel[count].Frequency = mm_table->entries[count].samclock; table->SamuLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->SamuLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->SamuLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->SamuLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1659,6 +1669,7 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table = table_info->mm_dep_table; struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); + uint32_t vddci; table->UvdLevelCount = (uint8_t)(mm_table->count); table->UvdBootLevel = 0; @@ -1669,8 +1680,16 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk; table->UvdLevel[count].MinVoltage |= (mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT; - table->UvdLevel[count].MinVoltage |= ((mm_table->entries[count].vddc - - data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT; + + if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) + vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table), + mm_table->entries[count].vddc - VDDC_VDDCI_DELTA); + else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) + vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA; + else + vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT; + + table->UvdLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT; table->UvdLevel[count].MinVoltage |= 1 << PHASES_SHIFT; /* retrieve divider value for VBIOS */ @@ -1691,8 +1710,8 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr, CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency); CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].MinVoltage); - } + return result; } -- cgit v0.10.2 From 838086414b3cda5c592591f2b82256996306dab6 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 9 Jun 2016 19:50:13 -0400 Subject: e1000e: keep Rx/Tx HW_VLAN_CTAG in sync The bit in the e1000 driver that mentions explicitly that the hardware has no support for separate RX/TX VLAN accel toggling rings true for e1000e as well, and thus both NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX need to be kept in sync. Revert a portion of commit 889ad456660461 ("e1000e: keep VLAN interfaces functional after rxvlan off") since keeping the bits in sync resolves the original issue. Signed-off-by: Jarod Wilson Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 73f7452..2b2e2f8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -154,16 +154,6 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) writel(val, hw->hw_addr + reg); } -static bool e1000e_vlan_used(struct e1000_adapter *adapter) -{ - u16 vid; - - for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) - return true; - - return false; -} - /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure @@ -3453,8 +3443,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX || - e1000e_vlan_used(adapter)) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter); @@ -6926,6 +6915,14 @@ static netdev_features_t e1000_fix_features(struct net_device *netdev, if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN)) features &= ~NETIF_F_RXFCS; + /* Since there is no support for separate Rx/Tx vlan accel + * enable/disable make sure Tx flag is always in same state as Rx. + */ + if (features & NETIF_F_HW_VLAN_CTAG_RX) + features |= NETIF_F_HW_VLAN_CTAG_TX; + else + features &= ~NETIF_F_HW_VLAN_CTAG_TX; + return features; } -- cgit v0.10.2 From d9d533c1483c4daf76e7e720c35896a430563ff8 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Tue, 28 Jun 2016 13:28:50 +0800 Subject: drm/amdgpu: add ACLK_CNTL setting for polaris10 This is a temporary workaround for early boards. Signed-off-by: Ken Wang Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 1a5cbaf..b2ebd4f 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -47,6 +47,8 @@ #include "dce/dce_10_0_d.h" #include "dce/dce_10_0_sh_mask.h" +#include "smu/smu_7_1_3_d.h" + #define GFX8_NUM_GFX_RINGS 1 #define GFX8_NUM_COMPUTE_RINGS 8 @@ -693,6 +695,7 @@ static void gfx_v8_0_init_golden_registers(struct amdgpu_device *adev) amdgpu_program_register_sequence(adev, polaris10_golden_common_all, (const u32)ARRAY_SIZE(polaris10_golden_common_all)); + WREG32_SMC(ixCG_ACLK_CNTL, 0x0000001C); break; case CHIP_CARRIZO: amdgpu_program_register_sequence(adev, -- cgit v0.10.2 From a7f14a184e0e8e94becfc3f9608f6b0f9c339572 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 28 Jun 2016 16:22:07 +0800 Subject: drm/amd/powerplay: workaround for UVD clock issue workaround issue that when uvd dpm disabled, uvd clock remain high on polaris10. Manually turn off the clocks. Signed-off-by: Rex Zhu Reviewed-by: Ken Wang Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index e19520c..d9c88d13 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -1106,6 +1106,10 @@ static void amdgpu_uvd_idle_work_handler(struct work_struct *work) if (fences == 0 && handles == 0) { if (adev->pm.dpm_enabled) { amdgpu_dpm_enable_uvd(adev, false); + /* just work around for uvd clock remain high even + * when uvd dpm disabled on Polaris10 */ + if (adev->asic_type == CHIP_POLARIS10) + amdgpu_asic_set_uvd_clocks(adev, 0, 0); } else { amdgpu_asic_set_uvd_clocks(adev, 0, 0); } -- cgit v0.10.2 From b3a3c5176c146ec7de653a3062237620464175fb Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 13 May 2016 01:51:55 +0800 Subject: ixgbevf: ixgbevf_write/read_posted_mbx should use IXGBE_ERR_MBX to initialize ret_val Now ixgbevf_write/read_posted_mbx use -IXGBE_ERR_MBX as the initiative return value, but it's incorrect, cause in ixgbevf_vlan_rx_add_vid(), it use err == IXGBE_ERR_MBX, the err returned from mac.ops.set_vfta, and in ixgbevf_set_vfta_vf, it return from write/read_posted. so we should initialize err with IXGBE_ERR_MBX, instead of -IXGBE_ERR_MBX. With this fix, the other functions that called it also can work well, cause they only care about if err is 0 or not. Signed-off-by: Xin Long Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbevf/mbx.c b/drivers/net/ethernet/intel/ixgbevf/mbx.c index 61a80da..2819abc 100644 --- a/drivers/net/ethernet/intel/ixgbevf/mbx.c +++ b/drivers/net/ethernet/intel/ixgbevf/mbx.c @@ -85,7 +85,7 @@ static s32 ixgbevf_poll_for_ack(struct ixgbe_hw *hw) static s32 ixgbevf_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size) { struct ixgbe_mbx_info *mbx = &hw->mbx; - s32 ret_val = -IXGBE_ERR_MBX; + s32 ret_val = IXGBE_ERR_MBX; if (!mbx->ops.read) goto out; @@ -111,7 +111,7 @@ out: static s32 ixgbevf_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size) { struct ixgbe_mbx_info *mbx = &hw->mbx; - s32 ret_val = -IXGBE_ERR_MBX; + s32 ret_val = IXGBE_ERR_MBX; /* exit if either we can't write or there isn't a defined timeout */ if (!mbx->ops.write || !mbx->timeout) -- cgit v0.10.2 From 7b427a59538a98161321aa46c13f4ea81b43f4eb Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Mon, 27 Jun 2016 16:33:24 +0800 Subject: xen-blkfront: save uncompleted reqs in blkfront_resume() Uncompleted reqs used to be 'saved and resubmitted' in blkfront_recover() during migration, but that's too late after multi-queue was introduced. After a migrate to another host (which may not have multiqueue support), the number of rings (block hardware queues) may be changed and the ring and shadow structure will also be reallocated. The blkfront_recover() then can't 'save and resubmit' the real uncompleted reqs because shadow structure have been reallocated. This patch fixes this issue by moving the 'save' logic out of blkfront_recover() to earlier place in blkfront_resume(). The 'resubmit' is not changed and still in blkfront_recover(). Signed-off-by: Bob Liu Signed-off-by: Konrad Rzeszutek Wilk Cc: stable@vger.kernel.org diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 2e6d1e9..fcc5b4e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -207,6 +207,9 @@ struct blkfront_info struct blk_mq_tag_set tag_set; struct blkfront_ring_info *rinfo; unsigned int nr_rings; + /* Save uncomplete reqs and bios for migration. */ + struct list_head requests; + struct bio_list bio_list; }; static unsigned int nr_minors; @@ -2002,69 +2005,22 @@ static int blkif_recover(struct blkfront_info *info) { unsigned int i, r_index; struct request *req, *n; - struct blk_shadow *copy; int rc; struct bio *bio, *cloned_bio; - struct bio_list bio_list, merge_bio; unsigned int segs, offset; int pending, size; struct split_bio *split_bio; - struct list_head requests; blkfront_gather_backend_features(info); segs = info->max_indirect_segments ? : BLKIF_MAX_SEGMENTS_PER_REQUEST; blk_queue_max_segments(info->rq, segs); - bio_list_init(&bio_list); - INIT_LIST_HEAD(&requests); for (r_index = 0; r_index < info->nr_rings; r_index++) { - struct blkfront_ring_info *rinfo; - - rinfo = &info->rinfo[r_index]; - /* Stage 1: Make a safe copy of the shadow state. */ - copy = kmemdup(rinfo->shadow, sizeof(rinfo->shadow), - GFP_NOIO | __GFP_REPEAT | __GFP_HIGH); - if (!copy) - return -ENOMEM; - - /* Stage 2: Set up free list. */ - memset(&rinfo->shadow, 0, sizeof(rinfo->shadow)); - for (i = 0; i < BLK_RING_SIZE(info); i++) - rinfo->shadow[i].req.u.rw.id = i+1; - rinfo->shadow_free = rinfo->ring.req_prod_pvt; - rinfo->shadow[BLK_RING_SIZE(info)-1].req.u.rw.id = 0x0fffffff; + struct blkfront_ring_info *rinfo = &info->rinfo[r_index]; rc = blkfront_setup_indirect(rinfo); - if (rc) { - kfree(copy); + if (rc) return rc; - } - - for (i = 0; i < BLK_RING_SIZE(info); i++) { - /* Not in use? */ - if (!copy[i].request) - continue; - - /* - * Get the bios in the request so we can re-queue them. - */ - if (copy[i].request->cmd_flags & - (REQ_FLUSH | REQ_FUA | REQ_DISCARD | REQ_SECURE)) { - /* - * Flush operations don't contain bios, so - * we need to requeue the whole request - */ - list_add(©[i].request->queuelist, &requests); - continue; - } - merge_bio.head = copy[i].request->bio; - merge_bio.tail = copy[i].request->biotail; - bio_list_merge(&bio_list, &merge_bio); - copy[i].request->bio = NULL; - blk_end_request_all(copy[i].request, 0); - } - - kfree(copy); } xenbus_switch_state(info->xbdev, XenbusStateConnected); @@ -2079,7 +2035,7 @@ static int blkif_recover(struct blkfront_info *info) kick_pending_request_queues(rinfo); } - list_for_each_entry_safe(req, n, &requests, queuelist) { + list_for_each_entry_safe(req, n, &info->requests, queuelist) { /* Requeue pending requests (flush or discard) */ list_del_init(&req->queuelist); BUG_ON(req->nr_phys_segments > segs); @@ -2087,7 +2043,7 @@ static int blkif_recover(struct blkfront_info *info) } blk_mq_kick_requeue_list(info->rq); - while ((bio = bio_list_pop(&bio_list)) != NULL) { + while ((bio = bio_list_pop(&info->bio_list)) != NULL) { /* Traverse the list of pending bios and re-queue them */ if (bio_segments(bio) > segs) { /* @@ -2133,9 +2089,42 @@ static int blkfront_resume(struct xenbus_device *dev) { struct blkfront_info *info = dev_get_drvdata(&dev->dev); int err = 0; + unsigned int i, j; dev_dbg(&dev->dev, "blkfront_resume: %s\n", dev->nodename); + bio_list_init(&info->bio_list); + INIT_LIST_HEAD(&info->requests); + for (i = 0; i < info->nr_rings; i++) { + struct blkfront_ring_info *rinfo = &info->rinfo[i]; + struct bio_list merge_bio; + struct blk_shadow *shadow = rinfo->shadow; + + for (j = 0; j < BLK_RING_SIZE(info); j++) { + /* Not in use? */ + if (!shadow[j].request) + continue; + + /* + * Get the bios in the request so we can re-queue them. + */ + if (shadow[j].request->cmd_flags & + (REQ_FLUSH | REQ_FUA | REQ_DISCARD | REQ_SECURE)) { + /* + * Flush operations don't contain bios, so + * we need to requeue the whole request + */ + list_add(&shadow[j].request->queuelist, &info->requests); + continue; + } + merge_bio.head = shadow[j].request->bio; + merge_bio.tail = shadow[j].request->biotail; + bio_list_merge(&info->bio_list, &merge_bio); + shadow[j].request->bio = NULL; + blk_mq_end_request(shadow[j].request, 0); + } + } + blkif_free(info, info->connected == BLKIF_STATE_CONNECTED); err = negotiate_mq(info); -- cgit v0.10.2 From 9a9b6aa6a8759c83024627d681eff982d6ee03b7 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 28 Jun 2016 10:32:00 -0700 Subject: Input: add SW_PEN_INSERTED define Some devices with a pen may have a switch that can be used to detect when the pen is inserted or removed to a slot on the device. Let's add a define to the input event codes so that everyone can be on the same page for what event we should generate when the pen is inserted or removed. In general the pen switch could be used by the software on the device to kick off any number of actions when the pen is inserted or removed. Signed-off-by: Douglas Anderson Signed-off-by: Dmitry Torokhov diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 737fa32..d6d071f 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -780,6 +780,7 @@ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ #define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MUTE_DEVICE 0x0e /* set = device disabled */ +#define SW_PEN_INSERTED 0x0f /* set = pen inserted */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) -- cgit v0.10.2 From caca925fca4fb30c67be88cacbe908eec6721e43 Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Wed, 29 Jun 2016 09:51:35 -0700 Subject: Input: xpad - validate USB endpoint count during probe This prevents a malicious USB device from causing an oops. Signed-off-by: Cameron Gutman Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 3438e98..a529a45 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1431,6 +1431,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id int ep_irq_in_idx; int i, error; + if (intf->cur_altsetting->desc.bNumEndpoints != 2) + return -ENODEV; + for (i = 0; xpad_device[i].idVendor; i++) { if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct)) -- cgit v0.10.2 From 91ff811f32763ea3135e832f7c1aeafc85ae1c98 Mon Sep 17 00:00:00 2001 From: Venkat Reddy Talla Date: Wed, 29 Jun 2016 15:31:27 +0530 Subject: regulator: max77620: check for valid regulator info SD4 regulator is not registered with regulator core framework in probe as there is no support in MAX77620 PMIC, removing SD4 entry from MAX77620 regulator information list and checking for valid regulator information data before configuring FPS source and FPS power up/down period to avoid NULL pointer exception if regulator not registered with core. Signed-off-by: Venkat Reddy Talla Signed-off-by: Mark Brown diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 321e804..a1b49a6 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic, unsigned int val; int ret; + if (!rinfo) + return 0; + switch (fps_src) { case MAX77620_FPS_SRC_0: case MAX77620_FPS_SRC_1: @@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic, int pd = rpdata->active_fps_pd_slot; int ret = 0; + if (!rinfo) + return 0; + if (is_suspend) { pu = rpdata->suspend_fps_pu_slot; pd = rpdata->suspend_fps_pd_slot; @@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = { RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1), RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), - RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), -- cgit v0.10.2 From 1bcbf42d2732b3fdaa8559b0dfc91567769e23c8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 29 Jun 2016 11:19:32 -0700 Subject: nfit: fix format interface code byte order Per JEDEC Annex L Release 3 the SPD data is: Bits 9~5 00 000 = Function Undefined 00 001 = Byte addressable energy backed 00 010 = Block addressed 00 011 = Byte addressable, no energy backed All other codes reserved Bits 4~0 0 0000 = Proprietary interface 0 0001 = Standard interface 1 All other codes reserved; see Definitions of Functions ...and per the ACPI 6.1 spec: byte0: Bits 4~0 (0 or 1) byte1: Bits 9~5 (1, 2, or 3) ...so a format interface code displayed as 0x301 should be stored in the nfit as (0x1, 0x3), little-endian. Cc: Toshi Kani Cc: Rafael J. Wysocki Cc: Robert Moore Cc: Robert Elliott Link: https://bugzilla.kernel.org/show_bug.cgi?id=121161 Fixes: 30ec5fd464d5 ("nfit: fix format interface code byte order per ACPI6.1") Fixes: 5ad9a7fde07a ("acpi/nfit: Update nfit driver to comply with ACPI 6.1") Reported-by: Kristin Jacque Signed-off-by: Dan Williams diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 32579a7..ac6ddcc0 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -928,7 +928,7 @@ static ssize_t format_show(struct device *dev, { struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev); - return sprintf(buf, "0x%04x\n", be16_to_cpu(dcr->code)); + return sprintf(buf, "0x%04x\n", le16_to_cpu(dcr->code)); } static DEVICE_ATTR_RO(format); @@ -961,8 +961,8 @@ static ssize_t format1_show(struct device *dev, continue; if (nfit_dcr->dcr->code == dcr->code) continue; - rc = sprintf(buf, "%#x\n", - be16_to_cpu(nfit_dcr->dcr->code)); + rc = sprintf(buf, "0x%04x\n", + le16_to_cpu(nfit_dcr->dcr->code)); break; } if (rc != ENXIO) diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h index 11cb383..02b9ea1 100644 --- a/drivers/acpi/nfit.h +++ b/drivers/acpi/nfit.h @@ -53,12 +53,12 @@ enum nfit_uuids { }; /* - * Region format interface codes are stored as an array of bytes in the - * NFIT DIMM Control Region structure + * Region format interface codes are stored with the interface as the + * LSB and the function as the MSB. */ -#define NFIT_FIC_BYTE cpu_to_be16(0x101) /* byte-addressable energy backed */ -#define NFIT_FIC_BLK cpu_to_be16(0x201) /* block-addressable non-energy backed */ -#define NFIT_FIC_BYTEN cpu_to_be16(0x301) /* byte-addressable non-energy backed */ +#define NFIT_FIC_BYTE cpu_to_le16(0x101) /* byte-addressable energy backed */ +#define NFIT_FIC_BLK cpu_to_le16(0x201) /* block-addressable non-energy backed */ +#define NFIT_FIC_BYTEN cpu_to_le16(0x301) /* byte-addressable non-energy backed */ enum { NFIT_BLK_READ_FLUSH = 1, -- cgit v0.10.2 From 4f14f5c11db161ab89b02f7196496ca32ca5dbf8 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 25 Jun 2016 07:59:22 +0300 Subject: ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode The i.MX51 datasheet says: Chapter 56.1.2.4 I2S Mode ... When I2S modes are entered (I2S master (01) or I2S slave (10)), the following settings are recommended: ... - TX Frame Rate should be 2 i.e. (STCCR[12:8] = 1) - RX Frame Rate should be 2 i.e. (SRCCR[12:8] = 1) Chapter 56.3.3.12 SSI Transmit and Receive Clock Control Registers (STCCR & SRCCR) ... Bits 12-8 DC4-DC0 Frame Rate Divider Control. These bits are used to control the divide ratio for the programmable frame rate dividers. The divide ratio works on the word clock. In Normal mode, this ratio determines the word transfer rate. In Network mode, this ratio sets the number of words per frame. The divide ratio ranges from 1 to 32 in Normal mode and from 2 to 32 in Network mode. In Normal mode, a divide ratio of 1 (DC=00000) provides continuous periodic data word transfer. A bit-length frame sync must be used in this case. Function fsl_ssi_hw_params() setup Normal mode for MONO output, so with DC=0, SSI enters to continuous periodic data word transfer. To fix this, setup DC for any I2S mode. Patch has tested on custom board based on Digi CCMX-51 module (i.MX51). Signed-off-by: Alexander Shiyan Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 632ecc0..bedec4a 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -952,16 +952,16 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, ssi_private->i2s_mode = CCSR_SSI_SCR_NET; switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: + regmap_update_bits(regs, CCSR_SSI_STCCR, + CCSR_SSI_SxCCR_DC_MASK, + CCSR_SSI_SxCCR_DC(2)); + regmap_update_bits(regs, CCSR_SSI_SRCCR, + CCSR_SSI_SxCCR_DC_MASK, + CCSR_SSI_SxCCR_DC(2)); switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFS: case SND_SOC_DAIFMT_CBS_CFS: ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_MASTER; - regmap_update_bits(regs, CCSR_SSI_STCCR, - CCSR_SSI_SxCCR_DC_MASK, - CCSR_SSI_SxCCR_DC(2)); - regmap_update_bits(regs, CCSR_SSI_SRCCR, - CCSR_SSI_SxCCR_DC_MASK, - CCSR_SSI_SxCCR_DC(2)); break; case SND_SOC_DAIFMT_CBM_CFM: ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_SLAVE; -- cgit v0.10.2 From 3c35f6edc09b239a60de87a5aeb78563fc372704 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 16:56:49 +0100 Subject: reset: Reorder inline reset_control_get*() wrappers We're about to split the current API into two, where consumers will be forced to be explicit when requesting reset lines. The choice will be to either the call the *_exclusive or *_shared variant depending on whether they can actually tolorate not being asserted when that request is made. The new API will look like this once reorded and complete: reset_control_get_exclusive() reset_control_get_shared() reset_control_get_optional_exclusive() reset_control_get_optional_shared() of_reset_control_get_exclusive() of_reset_control_get_shared() of_reset_control_get_exclusive_by_index() of_reset_control_get_shared_by_index() devm_reset_control_get_exclusive() devm_reset_control_get_shared() devm_reset_control_get_optional_exclusive() devm_reset_control_get_optional_shared() devm_reset_control_get_exclusive_by_index() devm_reset_control_get_shared_by_index() Signed-off-by: Lee Jones Signed-off-by: Philipp Zabel diff --git a/include/linux/reset.h b/include/linux/reset.h index ec0306ce..33eaf11 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -107,12 +107,6 @@ static inline struct reset_control *__must_check reset_control_get( return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); } -static inline struct reset_control *reset_control_get_optional( - struct device *dev, const char *id) -{ - return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); -} - /** * reset_control_get_shared - Lookup and obtain a shared reference to a * reset controller. @@ -141,6 +135,12 @@ static inline struct reset_control *reset_control_get_shared( return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1); } +static inline struct reset_control *reset_control_get_optional( + struct device *dev, const char *id) +{ + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); +} + /** * of_reset_control_get - Lookup and obtain an exclusive reference to a * reset controller. @@ -191,6 +191,21 @@ static inline struct reset_control *__must_check devm_reset_control_get( return __devm_reset_control_get(dev, id, 0, 0); } +/** + * devm_reset_control_get_shared - resource managed reset_control_get_shared() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get_shared(). For reset controllers returned from + * this function, reset_control_put() is called automatically on driver detach. + * See reset_control_get_shared() for more information. + */ +static inline struct reset_control *devm_reset_control_get_shared( + struct device *dev, const char *id) +{ + return __devm_reset_control_get(dev, id, 0, 1); +} + static inline struct reset_control *devm_reset_control_get_optional( struct device *dev, const char *id) { @@ -213,21 +228,6 @@ static inline struct reset_control *devm_reset_control_get_by_index( } /** - * devm_reset_control_get_shared - resource managed reset_control_get_shared() - * @dev: device to be reset by the controller - * @id: reset line name - * - * Managed reset_control_get_shared(). For reset controllers returned from - * this function, reset_control_put() is called automatically on driver detach. - * See reset_control_get_shared() for more information. - */ -static inline struct reset_control *devm_reset_control_get_shared( - struct device *dev, const char *id) -{ - return __devm_reset_control_get(dev, id, 0, 1); -} - -/** * devm_reset_control_get_shared_by_index - resource managed * reset_control_get_shared * @dev: device to be reset by the controller -- cgit v0.10.2 From a53e35db70d1638002e40d495d096181dbb0fe16 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 16:56:50 +0100 Subject: reset: Ensure drivers are explicit when requesting reset lines Phasing out generic reset line requests enables us to make some better decisions on when and how to (de)assert said lines. If an 'exclusive' line is requested, we know a device *requires* a reset and that it's preferable to act upon a request right away. However, if a 'shared' reset line is requested, we can reasonably assume sure that placing a device into reset isn't a hard requirement, but probably a measure to save power and is thus able to cope with not being asserted if another device is still in use. In order allow gentle adoption and not to forcing all consumers to move to the API immediately, causing administration headache between subsystems, this patch adds some temporary stand-in shim-calls. This will ease the burden at merge time and allow subsystems to migrate over to the new API in a more realistic time-frame. Signed-off-by: Lee Jones Signed-off-by: Philipp Zabel diff --git a/include/linux/reset.h b/include/linux/reset.h index 33eaf11..9cf4cf3 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -84,8 +84,8 @@ static inline struct reset_control *__devm_reset_control_get( #endif /* CONFIG_RESET_CONTROLLER */ /** - * reset_control_get - Lookup and obtain an exclusive reference to a - * reset controller. + * reset_control_get_exclusive - Lookup and obtain an exclusive reference + * to a reset controller. * @dev: device to be reset by the controller * @id: reset line name * @@ -98,8 +98,8 @@ static inline struct reset_control *__devm_reset_control_get( * * Use of id names is optional. */ -static inline struct reset_control *__must_check reset_control_get( - struct device *dev, const char *id) +static inline struct reset_control * +__must_check reset_control_get_exclusive(struct device *dev, const char *id) { #ifndef CONFIG_RESET_CONTROLLER WARN_ON(1); @@ -135,15 +135,15 @@ static inline struct reset_control *reset_control_get_shared( return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1); } -static inline struct reset_control *reset_control_get_optional( +static inline struct reset_control *reset_control_get_optional_exclusive( struct device *dev, const char *id) { return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); } /** - * of_reset_control_get - Lookup and obtain an exclusive reference to a - * reset controller. + * of_reset_control_get_exclusive - Lookup and obtain an exclusive reference + * to a reset controller. * @node: device to be reset by the controller * @id: reset line name * @@ -151,15 +151,16 @@ static inline struct reset_control *reset_control_get_optional( * * Use of id names is optional. */ -static inline struct reset_control *of_reset_control_get( +static inline struct reset_control *of_reset_control_get_exclusive( struct device_node *node, const char *id) { return __of_reset_control_get(node, id, 0, 0); } /** - * of_reset_control_get_by_index - Lookup and obtain an exclusive reference to - * a reset controller by index. + * of_reset_control_get_exclusive_by_index - Lookup and obtain an exclusive + * reference to a reset controller + * by index. * @node: device to be reset by the controller * @index: index of the reset controller * @@ -167,23 +168,27 @@ static inline struct reset_control *of_reset_control_get( * in whatever order. Returns a struct reset_control or IS_ERR() condition * containing errno. */ -static inline struct reset_control *of_reset_control_get_by_index( +static inline struct reset_control *of_reset_control_get_exclusive_by_index( struct device_node *node, int index) { return __of_reset_control_get(node, NULL, index, 0); } /** - * devm_reset_control_get - resource managed reset_control_get() + * devm_reset_control_get_exclusive - resource managed + * reset_control_get_exclusive() * @dev: device to be reset by the controller * @id: reset line name * - * Managed reset_control_get(). For reset controllers returned from this - * function, reset_control_put() is called automatically on driver detach. - * See reset_control_get() for more information. + * Managed reset_control_get_exclusive(). For reset controllers returned + * from this function, reset_control_put() is called automatically on driver + * detach. + * + * See reset_control_get_exclusive() for more information. */ -static inline struct reset_control *__must_check devm_reset_control_get( - struct device *dev, const char *id) +static inline struct reset_control * +__must_check devm_reset_control_get_exclusive(struct device *dev, + const char *id) { #ifndef CONFIG_RESET_CONTROLLER WARN_ON(1); @@ -206,23 +211,26 @@ static inline struct reset_control *devm_reset_control_get_shared( return __devm_reset_control_get(dev, id, 0, 1); } -static inline struct reset_control *devm_reset_control_get_optional( +static inline struct reset_control *devm_reset_control_get_optional_exclusive( struct device *dev, const char *id) { return __devm_reset_control_get(dev, id, 0, 0); } /** - * devm_reset_control_get_by_index - resource managed reset_control_get + * devm_reset_control_get_exclusive_by_index - resource managed + * reset_control_get_exclusive() * @dev: device to be reset by the controller * @index: index of the reset controller * - * Managed reset_control_get(). For reset controllers returned from this - * function, reset_control_put() is called automatically on driver detach. - * See reset_control_get() for more information. + * Managed reset_control_get_exclusive(). For reset controllers returned from + * this function, reset_control_put() is called automatically on driver + * detach. + * + * See reset_control_get_exclusive() for more information. */ -static inline struct reset_control *devm_reset_control_get_by_index( - struct device *dev, int index) +static inline struct reset_control * +devm_reset_control_get_exclusive_by_index(struct device *dev, int index) { return __devm_reset_control_get(dev, NULL, index, 0); } @@ -243,4 +251,54 @@ static inline struct reset_control *devm_reset_control_get_shared_by_index( return __devm_reset_control_get(dev, NULL, index, 1); } +/* + * TEMPORARY calls to use during transition: + * + * of_reset_control_get() => of_reset_control_get_exclusive() + * + * These inline function calls will be removed once all consumers + * have been moved over to the new explicit API. + */ +static inline struct reset_control *reset_control_get( + struct device *dev, const char *id) +{ + return reset_control_get_exclusive(dev, id); +} + +static inline struct reset_control *reset_control_get_optional( + struct device *dev, const char *id) +{ + return reset_control_get_optional_exclusive(dev, id); +} + +static inline struct reset_control *of_reset_control_get( + struct device_node *node, const char *id) +{ + return of_reset_control_get_exclusive(node, id); +} + +static inline struct reset_control *of_reset_control_get_by_index( + struct device_node *node, int index) +{ + return of_reset_control_get_exclusive_by_index(node, index); +} + +static inline struct reset_control *devm_reset_control_get( + struct device *dev, const char *id) +{ + return devm_reset_control_get_exclusive(dev, id); +} + +static inline struct reset_control *devm_reset_control_get_optional( + struct device *dev, const char *id) +{ + return devm_reset_control_get_optional_exclusive(dev, id); + +} + +static inline struct reset_control *devm_reset_control_get_by_index( + struct device *dev, int index) +{ + return devm_reset_control_get_exclusive_by_index(dev, index); +} #endif -- cgit v0.10.2 From 40faee8ee471ae526344cd5c62ff520d356de841 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 16:56:51 +0100 Subject: reset: Supply *_shared variant calls when using of_* API Consumers need to be able to specify whether they are requesting an 'exclusive' or 'shared' reset line no matter which API (of_*, devm_*, etc) they are using. This change allows users of the of_* API in particular to specify that their request is for a 'shared' line. Signed-off-by: Lee Jones Signed-off-by: Philipp Zabel diff --git a/include/linux/reset.h b/include/linux/reset.h index 9cf4cf3..fd69240 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -158,6 +158,31 @@ static inline struct reset_control *of_reset_control_get_exclusive( } /** + * of_reset_control_get_shared - Lookup and obtain an shared reference + * to a reset controller. + * @node: device to be reset by the controller + * @id: reset line name + * + * When a reset-control is shared, the behavior of reset_control_assert / + * deassert is changed, the reset-core will keep track of a deassert_count + * and only (re-)assert the reset after reset_control_assert has been called + * as many times as reset_control_deassert was called. Also see the remark + * about shared reset-controls in the reset_control_assert docs. + * + * Calling reset_control_assert without first calling reset_control_deassert + * is not allowed on a shared reset control. Calling reset_control_reset is + * also not allowed on a shared reset control. + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * Use of id names is optional. + */ +static inline struct reset_control *of_reset_control_get_shared( + struct device_node *node, const char *id) +{ + return __of_reset_control_get(node, id, 0, 1); +} + +/** * of_reset_control_get_exclusive_by_index - Lookup and obtain an exclusive * reference to a reset controller * by index. @@ -175,6 +200,34 @@ static inline struct reset_control *of_reset_control_get_exclusive_by_index( } /** + * of_reset_control_get_shared_by_index - Lookup and obtain an shared + * reference to a reset controller + * by index. + * @node: device to be reset by the controller + * @index: index of the reset controller + * + * When a reset-control is shared, the behavior of reset_control_assert / + * deassert is changed, the reset-core will keep track of a deassert_count + * and only (re-)assert the reset after reset_control_assert has been called + * as many times as reset_control_deassert was called. Also see the remark + * about shared reset-controls in the reset_control_assert docs. + * + * Calling reset_control_assert without first calling reset_control_deassert + * is not allowed on a shared reset control. Calling reset_control_reset is + * also not allowed on a shared reset control. + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * This is to be used to perform a list of resets for a device or power domain + * in whatever order. Returns a struct reset_control or IS_ERR() condition + * containing errno. + */ +static inline struct reset_control *of_reset_control_get_shared_by_index( + struct device_node *node, int index) +{ + return __of_reset_control_get(node, NULL, index, 1); +} + +/** * devm_reset_control_get_exclusive - resource managed * reset_control_get_exclusive() * @dev: device to be reset by the controller -- cgit v0.10.2 From c33d61a0c400c50f378ef03a386e646abca292ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 16:56:52 +0100 Subject: reset: Supply *_shared variant calls when using *_optional APIs Consumers need to be able to specify whether they are requesting an 'exclusive' or 'shared' reset line no matter which API (of_*, devm_*, etc) they are using. This change allows users of the optional_* API in particular to specify that their request is for a 'shared' line. Signed-off-by: Lee Jones Signed-off-by: Philipp Zabel diff --git a/include/linux/reset.h b/include/linux/reset.h index fd69240..c358106 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -141,6 +141,12 @@ static inline struct reset_control *reset_control_get_optional_exclusive( return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); } +static inline struct reset_control *reset_control_get_optional_shared( + struct device *dev, const char *id) +{ + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1); +} + /** * of_reset_control_get_exclusive - Lookup and obtain an exclusive reference * to a reset controller. @@ -270,6 +276,12 @@ static inline struct reset_control *devm_reset_control_get_optional_exclusive( return __devm_reset_control_get(dev, id, 0, 0); } +static inline struct reset_control *devm_reset_control_get_optional_shared( + struct device *dev, const char *id) +{ + return __devm_reset_control_get(dev, id, 0, 1); +} + /** * devm_reset_control_get_exclusive_by_index - resource managed * reset_control_get_exclusive() -- cgit v0.10.2 From 0bcc0eab363aa80f79769324bf3f2ab7781840f2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 16:56:53 +0100 Subject: reset: TRIVIAL: Add line break at same place for similar APIs Standardise the way inline functions: devm_reset_control_get_shared_by_index devm_reset_control_get_exclusive_by_index ... are formatted. Signed-off-by: Lee Jones Signed-off-by: Philipp Zabel diff --git a/include/linux/reset.h b/include/linux/reset.h index c358106..45a4abe 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -310,8 +310,8 @@ devm_reset_control_get_exclusive_by_index(struct device *dev, int index) * this function, reset_control_put() is called automatically on driver detach. * See reset_control_get_shared() for more information. */ -static inline struct reset_control *devm_reset_control_get_shared_by_index( - struct device *dev, int index) +static inline struct reset_control * +devm_reset_control_get_shared_by_index(struct device *dev, int index) { return __devm_reset_control_get(dev, NULL, index, 1); } -- cgit v0.10.2 From f5ee3f2b5ad6881a8194b9f684ce11640d1062f7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:54 +0100 Subject: usb: host: ohci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Alan Stern Signed-off-by: Lee Jones diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index acf2eb2..02816a1 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -188,13 +188,15 @@ static int st_ohci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); goto err_put_clks; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); goto err_put_clks; -- cgit v0.10.2 From 19599304625b74c95bff318c735928eec668b1ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Jun 2016 18:08:53 +0100 Subject: usb: host: ehci-st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ST EHCI IP shares its reset line with the OHCI IP. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Peter Griffin Acked-by: Alan Stern Signed-off-by: Lee Jones diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index a94ed67..be4a278 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -206,7 +206,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->clk48 = NULL; } - priv->pwr = devm_reset_control_get_optional(&dev->dev, "power"); + priv->pwr = + devm_reset_control_get_optional_shared(&dev->dev, "power"); if (IS_ERR(priv->pwr)) { err = PTR_ERR(priv->pwr); if (err == -EPROBE_DEFER) @@ -214,7 +215,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) priv->pwr = NULL; } - priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset"); + priv->rst = + devm_reset_control_get_optional_shared(&dev->dev, "softreset"); if (IS_ERR(priv->rst)) { err = PTR_ERR(priv->rst); if (err == -EPROBE_DEFER) -- cgit v0.10.2 From 002f17bc54ff4005260d8e6e6700de97f5b25679 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:23:58 +0100 Subject: usb: dwc3: st: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Felipe Balbi Signed-off-by: Lee Jones diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9..b204617 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -237,7 +237,8 @@ static int st_dwc3_probe(struct platform_device *pdev) /* Manage PowerDown */ reset_control_deassert(dwc3_data->rstc_pwrdn); - dwc3_data->rstc_rst = devm_reset_control_get(dev, "softreset"); + dwc3_data->rstc_rst = + devm_reset_control_get_shared(dev, "softreset"); if (IS_ERR(dwc3_data->rstc_rst)) { dev_err(&pdev->dev, "could not get reset controller\n"); ret = PTR_ERR(dwc3_data->rstc_rst); -- cgit v0.10.2 From 9278e707f4e187df2b4d9eeb2bc78a1724fbe4ac Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:32:12 +0100 Subject: phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the ports on the Generic PHY share their reset lines with each other. New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Signed-off-by: Lee Jones diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 1d5ae5f..53cf8d1 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -105,7 +105,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) phy_dev->dev = dev; dev_set_drvdata(dev, phy_dev); - phy_dev->rstc = devm_reset_control_get(dev, "global"); + phy_dev->rstc = devm_reset_control_get_shared(dev, "global"); if (IS_ERR(phy_dev->rstc)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstc); -- cgit v0.10.2 From 82d8eb40bab10082050be945c8e7096df8e9f989 Mon Sep 17 00:00:00 2001 From: Rhyland Klein Date: Thu, 12 May 2016 13:45:04 -0400 Subject: mfd: max77620: Fix FPS switch statements When configuring FPS during probe, assuming a DT node is present for FPS, the code can run into a problem with the switch statements in max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely, in the case of chip->chip_id == MAX77620, it will set fps_[mix|max]_period but then fall through to the default switch case and return -EINVAL. Returning this from max77620_config_fps() will cause probe to fail. Signed-off-by: Rhyland Klein Reviewed-by: Laxman Dewangan Reviewed-by: Thierry Reding Tested-by: Thierry Reding Tested-by: Alexandre Courbot Signed-off-by: Lee Jones diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index 199d261..f32fbb8 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -203,6 +203,7 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, break; case MAX77620: fps_min_period = MAX77620_FPS_PERIOD_MIN_US; + break; default: return -EINVAL; } @@ -236,6 +237,7 @@ static int max77620_config_fps(struct max77620_chip *chip, break; case MAX77620: fps_max_period = MAX77620_FPS_PERIOD_MAX_US; + break; default: return -EINVAL; } -- cgit v0.10.2 From ba4a1c28a92df55b9263e838068b92eaa80c7850 Mon Sep 17 00:00:00 2001 From: Steve Twiss Date: Mon, 27 Jun 2016 16:06:36 +0100 Subject: mfd: da9053: Fix compiler warning message for uninitialised variable Fix compiler warning caused by an uninitialised variable inside da9052_group_write() function. Defaulting the value to zero covers the trivial case. Signed-off-by: Steve Twiss Reported-by: Geert Uytterhoeven Signed-off-by: Lee Jones diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index c18a4c1..ce9230a 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -171,7 +171,7 @@ static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg, static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg, unsigned reg_cnt, unsigned char *val) { - int ret; + int ret = 0; int i; for (i = 0; i < reg_cnt; i++) { -- cgit v0.10.2 From bfa37087aa04e45f56c41142dfceecb79b8e6ef9 Mon Sep 17 00:00:00 2001 From: Darren Stevens Date: Wed, 29 Jun 2016 21:06:28 +0100 Subject: powerpc: Initialise pci_io_base as early as possible Commit d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for radix") turned kernel memory and IO addresses from #defined constants to variables initialised at runtime. On PA6T (pasemi) systems the setup_arch() machine call initialises the onboard PCI-e root-ports, and uses pci_io_base to do this, which is now before its value has been set, resulting in a panic early in boot before console IO is initialised. Move the pci_io_base initialisation to the same place as vmalloc ranges are set (hash__early_init_mmu()/radix__early_init_mmu()) - this is the earliest possible place we can initialise it. Fixes: d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for radix") Reported-by: Christian Zigotzky Signed-off-by: Darren Stevens Reviewed-by: Aneesh Kumar K.V [mpe: Add #ifdef CONFIG_PCI, massage change log slightly] Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 88a5eca..ab84c89 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -230,6 +230,7 @@ extern unsigned long __kernel_virt_size; #define KERN_VIRT_SIZE __kernel_virt_size extern struct page *vmemmap; extern unsigned long ioremap_bot; +extern unsigned long pci_io_base; #endif /* __ASSEMBLY__ */ #include diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 3759df5..a5ae49a 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -47,7 +47,6 @@ static int __init pcibios_init(void) printk(KERN_INFO "PCI: Probing PCI hardware\n"); - pci_io_base = ISA_IO_BASE; /* For now, override phys_mem_access_prot. If we need it,g * later, we may move that initialization to each ppc_md */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 5b22ba0..2971ea1 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -922,6 +922,10 @@ void __init hash__early_init_mmu(void) vmemmap = (struct page *)H_VMEMMAP_BASE; ioremap_bot = IOREMAP_BASE; +#ifdef CONFIG_PCI + pci_io_base = ISA_IO_BASE; +#endif + /* Initialize the MMU Hash table and create the linear mapping * of memory. Has to be done before SLB initialization as this is * currently where the page size encoding is obtained. diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c index e58707d..7931e14 100644 --- a/arch/powerpc/mm/pgtable-radix.c +++ b/arch/powerpc/mm/pgtable-radix.c @@ -328,6 +328,11 @@ void __init radix__early_init_mmu(void) __vmalloc_end = RADIX_VMALLOC_END; vmemmap = (struct page *)RADIX_VMEMMAP_BASE; ioremap_bot = IOREMAP_BASE; + +#ifdef CONFIG_PCI + pci_io_base = ISA_IO_BASE; +#endif + /* * For now radix also use the same frag size */ -- cgit v0.10.2 From f8608985f851c917b3884b692d8e326b0210d34e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 18 May 2016 16:16:51 +0200 Subject: configfs: Remove ppos increment in configfs_write_bin_file The simple_write_to_buffer() already increments the @ppos on success, see fs/libfs.c simple_write_to_buffer() comment: " On success, the number of bytes written is returned and the offset @ppos advanced by this number, or negative value is returned on error. " If the configfs_write_bin_file() is invoked with @count smaller than the total length of the written binary file, it will be invoked multiple times. Since configfs_write_bin_file() increments @ppos on success, after calling simple_write_to_buffer(), the @ppos is incremented twice. Subsequent invocation of configfs_write_bin_file() will result in the next piece of data being written to the offset twice as long as the length of the previous write, thus creating buffer with "holes" in it. The simple testcase using DTO follows: $ mkdir /sys/kernel/config/device-tree/overlays/1 $ dd bs=1 if=foo.dtbo of=/sys/kernel/config/device-tree/overlays/1/dtbo Without this patch, the testcase will result in twice as big buffer in the kernel, which is then passed to the cfs_overlay_item_dtbo_write() . Signed-off-by: Marek Vasut Cc: Geert Uytterhoeven Cc: Christoph Hellwig Cc: Pantelis Antoniou diff --git a/fs/configfs/file.c b/fs/configfs/file.c index 33b7ee3..bbc1252 100644 --- a/fs/configfs/file.c +++ b/fs/configfs/file.c @@ -357,8 +357,6 @@ configfs_write_bin_file(struct file *file, const char __user *buf, len = simple_write_to_buffer(buffer->bin_buffer, buffer->bin_buffer_size, ppos, buf, count); - if (len > 0) - *ppos += len; out: mutex_unlock(&buffer->mutex); return len; -- cgit v0.10.2 From cab103274352721b77fc5923a631fc63350bef8e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:42:00 +0000 Subject: drm/i915: Fix missing unlock on error in i915_ppgtt_info() Add the missing unlock before return from function i915_ppgtt_info() in the error handling case. Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex) Signed-off-by: Wei Yongjun Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com (cherry picked from commit b0212486909de4f239ca9f20d032de1b1f2dc52e) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 3269033..1035468 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -2365,16 +2365,16 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) task = get_pid_task(file->pid, PIDTYPE_PID); if (!task) { ret = -ESRCH; - goto out_put; + goto out_unlock; } seq_printf(m, "\nproc: %s\n", task->comm); put_task_struct(task); idr_for_each(&file_priv->context_idr, per_file_ctx, (void *)(unsigned long)m); } +out_unlock: mutex_unlock(&dev->filelist_mutex); -out_put: intel_runtime_pm_put(dev_priv); mutex_unlock(&dev->struct_mutex); -- cgit v0.10.2 From 5c672ab3f0ee0f78f7acad183f34db0f8781a200 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 30 Jun 2016 13:10:49 +0200 Subject: fuse: serialize dirops by default Negotiate with userspace filesystems whether they support parallel readdir and lookup. Disable parallelism by default for fear of breaking fuse filesystems. Signed-off-by: Miklos Szeredi Fixes: 9902af79c01a ("parallel lookups: actual switch to rwsem") Fixes: d9b3dbdcfd62 ("fuse: switch to ->iterate_shared()") diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index ccd4971..264f07c 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -341,8 +341,10 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry, struct dentry *newent; bool outarg_valid = true; + fuse_lock_inode(dir); err = fuse_lookup_name(dir->i_sb, get_node_id(dir), &entry->d_name, &outarg, &inode); + fuse_unlock_inode(dir); if (err == -ENOENT) { outarg_valid = false; err = 0; @@ -1341,7 +1343,9 @@ static int fuse_readdir(struct file *file, struct dir_context *ctx) fuse_read_fill(req, file, ctx->pos, PAGE_SIZE, FUSE_READDIR); } + fuse_lock_inode(inode); fuse_request_send(fc, req); + fuse_unlock_inode(inode); nbytes = req->out.args[0].size; err = req->out.h.error; fuse_put_request(fc, req); diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index eddbe02..929c383 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -110,6 +110,9 @@ struct fuse_inode { /** Miscellaneous bits describing inode state */ unsigned long state; + + /** Lock for serializing lookup and readdir for back compatibility*/ + struct mutex mutex; }; /** FUSE inode state bits */ @@ -540,6 +543,9 @@ struct fuse_conn { /** write-back cache policy (default is write-through) */ unsigned writeback_cache:1; + /** allow parallel lookups and readdir (default is serialized) */ + unsigned parallel_dirops:1; + /* * The following bitfields are only for optimization purposes * and hence races in setting them will not cause malfunction @@ -956,4 +962,7 @@ int fuse_do_setattr(struct inode *inode, struct iattr *attr, void fuse_set_initialized(struct fuse_conn *fc); +void fuse_unlock_inode(struct inode *inode); +void fuse_lock_inode(struct inode *inode); + #endif /* _FS_FUSE_I_H */ diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 1ce6766..9961d843 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -97,6 +97,7 @@ static struct inode *fuse_alloc_inode(struct super_block *sb) INIT_LIST_HEAD(&fi->queued_writes); INIT_LIST_HEAD(&fi->writepages); init_waitqueue_head(&fi->page_waitq); + mutex_init(&fi->mutex); fi->forget = fuse_alloc_forget(); if (!fi->forget) { kmem_cache_free(fuse_inode_cachep, inode); @@ -117,6 +118,7 @@ static void fuse_destroy_inode(struct inode *inode) struct fuse_inode *fi = get_fuse_inode(inode); BUG_ON(!list_empty(&fi->write_files)); BUG_ON(!list_empty(&fi->queued_writes)); + mutex_destroy(&fi->mutex); kfree(fi->forget); call_rcu(&inode->i_rcu, fuse_i_callback); } @@ -351,6 +353,18 @@ int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid, return 0; } +void fuse_lock_inode(struct inode *inode) +{ + if (!get_fuse_conn(inode)->parallel_dirops) + mutex_lock(&get_fuse_inode(inode)->mutex); +} + +void fuse_unlock_inode(struct inode *inode) +{ + if (!get_fuse_conn(inode)->parallel_dirops) + mutex_unlock(&get_fuse_inode(inode)->mutex); +} + static void fuse_umount_begin(struct super_block *sb) { fuse_abort_conn(get_fuse_conn_super(sb)); @@ -898,6 +912,8 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->async_dio = 1; if (arg->flags & FUSE_WRITEBACK_CACHE) fc->writeback_cache = 1; + if (arg->flags & FUSE_PARALLEL_DIROPS) + fc->parallel_dirops = 1; if (arg->time_gran && arg->time_gran <= 1000000000) fc->sb->s_time_gran = arg->time_gran; } else { @@ -928,7 +944,8 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) FUSE_SPLICE_WRITE | FUSE_SPLICE_MOVE | FUSE_SPLICE_READ | FUSE_FLOCK_LOCKS | FUSE_IOCTL_DIR | FUSE_AUTO_INVAL_DATA | FUSE_DO_READDIRPLUS | FUSE_READDIRPLUS_AUTO | FUSE_ASYNC_DIO | - FUSE_WRITEBACK_CACHE | FUSE_NO_OPEN_SUPPORT; + FUSE_WRITEBACK_CACHE | FUSE_NO_OPEN_SUPPORT | + FUSE_PARALLEL_DIROPS; req->in.h.opcode = FUSE_INIT; req->in.numargs = 1; req->in.args[0].size = sizeof(*arg); diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 5974fae..27e1736 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -105,6 +105,9 @@ * * 7.24 * - add FUSE_LSEEK for SEEK_HOLE and SEEK_DATA support + * + * 7.25 + * - add FUSE_PARALLEL_DIROPS */ #ifndef _LINUX_FUSE_H @@ -140,7 +143,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 24 +#define FUSE_KERNEL_MINOR_VERSION 25 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -234,6 +237,7 @@ struct fuse_file_lock { * FUSE_ASYNC_DIO: asynchronous direct I/O submission * FUSE_WRITEBACK_CACHE: use writeback cache for buffered writes * FUSE_NO_OPEN_SUPPORT: kernel supports zero-message opens + * FUSE_PARALLEL_DIROPS: allow parallel lookups and readdir */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -253,6 +257,7 @@ struct fuse_file_lock { #define FUSE_ASYNC_DIO (1 << 15) #define FUSE_WRITEBACK_CACHE (1 << 16) #define FUSE_NO_OPEN_SUPPORT (1 << 17) +#define FUSE_PARALLEL_DIROPS (1 << 18) /** * CUSE INIT request/reply flags -- cgit v0.10.2 From b44439e42912b9dcc510a0ff891809ea2cadc46b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 18:08:22 +0200 Subject: ARM: mvebu: compile pm code conditionally A cleanup to include the headers correctly caused another build problem: arch/arm/mach-mvebu/kirkwood-pm.c:70:13: error: redefinition of 'kirkwood_pm_init' arch/arm/mach-mvebu/kirkwood-pm.h:23:20: note: previous definition of 'kirkwood_pm_init' was here The underlying issue is that kirkwood-pm.o is not actually meant to be used when CONFIG_PM is disabled, so we should also leave it out of the Makefile. The same seems to be true for the PM code in MACH_MVEBU_V7, and I'm treating it the same way here. Signed-off-by: Arnd Bergmann Fixes: d705c1a66e15 ("ARM: Kirkwood: fix kirkwood_pm_init() declaration/type") Signed-off-by: Gregory CLEMENT diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ecf9e0c..e53c6cf 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -7,9 +7,15 @@ CFLAGS_pmsu.o := -march=armv7-a obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o ifeq ($(CONFIG_MACH_MVEBU_V7),y) -obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o + +obj-$(CONFIG_PM) += pm.o pm-board.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o endif obj-$(CONFIG_MACH_DOVE) += dove.o -obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o + +ifeq ($(CONFIG_MACH_KIRKWOOD),y) +obj-y += kirkwood.o +obj-$(CONFIG_PM) += kirkwood-pm.o +endif -- cgit v0.10.2 From fedbb6b4ff341c1e2120f4ffbf367fd78ac3e8f3 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 29 Jun 2016 21:47:03 +0300 Subject: ipv4: Fix ip_skb_dst_mtu to use the sk passed by ip_finish_output ip_skb_dst_mtu uses skb->sk, assuming it is an AF_INET socket (e.g. it calls ip_sk_use_pmtu which casts sk as an inet_sk). However, in the case of UDP tunneling, the skb->sk is not necessarily an inet socket (could be AF_PACKET socket, or AF_UNSPEC if arriving from tun/tap). OTOH, the sk passed as an argument throughout IP stack's output path is the one which is of PMTU interest: - In case of local sockets, sk is same as skb->sk; - In case of a udp tunnel, sk is the tunneling socket. Fix, by passing ip_finish_output's sk to ip_skb_dst_mtu. This augments 7026b1ddb6 'netfilter: Pass socket pointer down through okfn().' Signed-off-by: Shmulik Ladkani Reviewed-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/include/net/ip.h b/include/net/ip.h index 37165fb..08f36cd 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -313,10 +313,9 @@ static inline unsigned int ip_dst_mtu_maybe_forward(const struct dst_entry *dst, return min(dst->dev->mtu, IP_MAX_MTU); } -static inline unsigned int ip_skb_dst_mtu(const struct sk_buff *skb) +static inline unsigned int ip_skb_dst_mtu(struct sock *sk, + const struct sk_buff *skb) { - struct sock *sk = skb->sk; - if (!sk || !sk_fullsock(sk) || ip_sk_use_pmtu(sk)) { bool forwarding = IPCB(skb)->flags & IPSKB_FORWARDED; diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index 2d25979..77e7f69 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -700,7 +700,7 @@ static int br_nf_ip_fragment(struct net *net, struct sock *sk, struct sk_buff *skb, int (*output)(struct net *, struct sock *, struct sk_buff *)) { - unsigned int mtu = ip_skb_dst_mtu(skb); + unsigned int mtu = ip_skb_dst_mtu(sk, skb); struct iphdr *iph = ip_hdr(skb); if (unlikely(((iph->frag_off & htons(IP_DF)) && !skb->ignore_df) || diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 124bf0a..4bd4921 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -271,7 +271,7 @@ static int ip_finish_output(struct net *net, struct sock *sk, struct sk_buff *sk return dst_output(net, sk, skb); } #endif - mtu = ip_skb_dst_mtu(skb); + mtu = ip_skb_dst_mtu(sk, skb); if (skb_is_gso(skb)) return ip_finish_output_gso(net, sk, skb, mtu); @@ -541,7 +541,7 @@ int ip_do_fragment(struct net *net, struct sock *sk, struct sk_buff *skb, iph = ip_hdr(skb); - mtu = ip_skb_dst_mtu(skb); + mtu = ip_skb_dst_mtu(sk, skb); if (IPCB(skb)->frag_max_size && IPCB(skb)->frag_max_size < mtu) mtu = IPCB(skb)->frag_max_size; -- cgit v0.10.2 From 43daa96b166c3cf5ff30dfac0c5efa2620e4beab Mon Sep 17 00:00:00 2001 From: Soohoon Lee Date: Wed, 29 Jun 2016 15:07:21 -0400 Subject: usbnet: Stop RX Q on MTU change When MTU is changed unlink_urbs() flushes RX Q but mean while usbnet_bh() can fill up the Q at the same time. Depends on which HCD is down there unlink takes long time then the flush never ends. Signed-off-by: Soohoon Lee Reviewed-by: Kimball Murray Signed-off-by: David S. Miller diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 61ba464..6086a01 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -395,8 +395,11 @@ int usbnet_change_mtu (struct net_device *net, int new_mtu) dev->hard_mtu = net->mtu + net->hard_header_len; if (dev->rx_urb_size == old_hard_mtu) { dev->rx_urb_size = dev->hard_mtu; - if (dev->rx_urb_size > old_rx_urb_size) + if (dev->rx_urb_size > old_rx_urb_size) { + usbnet_pause_rx(dev); usbnet_unlink_rx_urbs(dev); + usbnet_resume_rx(dev); + } } /* max qlen depend on hard_mtu and rx_urb_size */ @@ -1508,8 +1511,9 @@ static void usbnet_bh (unsigned long param) } else if (netif_running (dev->net) && netif_device_present (dev->net) && netif_carrier_ok(dev->net) && - !timer_pending (&dev->delay) && - !test_bit (EVENT_RX_HALT, &dev->flags)) { + !timer_pending(&dev->delay) && + !test_bit(EVENT_RX_PAUSED, &dev->flags) && + !test_bit(EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; if (temp < RX_QLEN(dev)) { -- cgit v0.10.2 From 54794580f5949253520265e46c903878ab222d84 Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:38 -0400 Subject: ACPI,PCI,IRQ: correct operator precedence The omitted parenthesis prevents the addition operation when acpi_penalize_isa_irq function is called. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 8fc7323..4ed4061 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -839,7 +839,7 @@ void acpi_penalize_isa_irq(int irq, int active) { if ((irq >= 0) && (irq < ARRAY_SIZE(acpi_isa_irq_penalty))) acpi_isa_irq_penalty[irq] = acpi_irq_get_penalty(irq) + - active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING; + (active ? PIRQ_PENALTY_ISA_USED : PIRQ_PENALTY_PCI_USING); } bool acpi_isa_irq_available(int irq) -- cgit v0.10.2 From 0b340405fca980b12a2ddafdd4536ad6fb624755 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 20 Jun 2016 12:20:58 +0200 Subject: drm/sun4i: Report proper vblank The sun4i display engine doesn't have any vblank counter. Use the proper helper for that. Signed-off-by: Maxime Ripard diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 257d2b4..cbe4a25 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -92,7 +92,7 @@ static struct drm_driver sun4i_drv_driver = { /* Frame Buffer Operations */ /* VBlank Operations */ - .get_vblank_counter = drm_vblank_count, + .get_vblank_counter = drm_vblank_no_hw_counter, .enable_vblank = sun4i_drv_enable_vblank, .disable_vblank = sun4i_drv_disable_vblank, }; -- cgit v0.10.2 From 2cd368300aa5bcec40c079ee5096287847506504 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 20 Jun 2016 12:20:59 +0200 Subject: drm/sun4i: Send vblank event when the CRTC is disabled So far, we were missing to send the vblank event when disabling the CRTC, making us never report the last vblank event. This was causing a time out on the page flip, which should be solved now. Signed-off-by: Maxime Ripard diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c index 4182a21..41cacec 100644 --- a/drivers/gpu/drm/sun4i/sun4i_crtc.c +++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c @@ -65,6 +65,14 @@ static void sun4i_crtc_disable(struct drm_crtc *crtc) DRM_DEBUG_DRIVER("Disabling the CRTC\n"); sun4i_tcon_disable(drv->tcon); + + if (crtc->state->event && !crtc->state->active) { + spin_lock_irq(&crtc->dev->event_lock); + drm_crtc_send_vblank_event(crtc, crtc->state->event); + spin_unlock_irq(&crtc->dev->event_lock); + + crtc->state->event = NULL; + } } static void sun4i_crtc_enable(struct drm_crtc *crtc) -- cgit v0.10.2 From 74524955556096a0b2a821a49b4d0abebad3ee16 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Thu, 16 Jun 2016 05:15:33 -0700 Subject: writeback: inode cgroup wb switch should not call ihold() Asynchronous wb switching of inodes takes an additional ref count on an inode to make sure inode remains valid until switchover is completed. However, anyone calling ihold() must already have a ref count on inode, but in this case inode->i_count may already be zero: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 917 at fs/inode.c:397 ihold+0x2b/0x30 CPU: 1 PID: 917 Comm: kworker/u4:5 Not tainted 4.7.0-rc2+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-8:16) 0000000000000000 ffff88007ca0fb58 ffffffff805990af 0000000000000000 0000000000000000 ffff88007ca0fb98 ffffffff80268702 0000018d000004e2 ffff88007cef40e8 ffff88007c9b89a8 ffff880079e3a740 0000000000000003 Call Trace: [] dump_stack+0x4d/0x6e [] __warn+0xc2/0xe0 [] warn_slowpath_null+0x18/0x20 [] ihold+0x2b/0x30 [] inode_switch_wbs+0x11c/0x180 [] wbc_detach_inode+0x170/0x1a0 [] writeback_sb_inodes+0x21c/0x530 [] wb_writeback+0xee/0x1e0 [] wb_workfn+0xd7/0x280 [] ? try_to_wake_up+0x1b1/0x2b0 [] process_one_work+0x129/0x300 [] worker_thread+0x126/0x480 [] ? __schedule+0x1c7/0x561 [] ? process_one_work+0x300/0x300 [] kthread+0xc4/0xe0 [] ? kfree+0xc8/0x100 [] ret_from_fork+0x1f/0x40 [] ? __kthread_parkme+0x70/0x70 ---[ end trace aaefd2fd9f306bc4 ]--- Signed-off-by: Tahsin Erdogan Acked-by: Tejun Heo Reviewed-by: Jan Kara Signed-off-by: Jens Axboe diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 989a2ce..fe7e83a 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -483,9 +483,9 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id) goto out_free; } inode->i_state |= I_WB_SWITCH; + __iget(inode); spin_unlock(&inode->i_lock); - ihold(inode); isw->inode = inode; atomic_inc(&isw_nr_in_flight); -- cgit v0.10.2 From cb7d224f82e41d82518e7f9ea271d215d4d08e6e Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Thu, 30 Jun 2016 10:39:32 -0400 Subject: lockd: unregister notifier blocks if the service fails to come up completely If the lockd service fails to start up then we need to be sure that the notifier blocks are not registered, otherwise a subsequent start of the service could cause the same notifier to be registered twice, leading to soft lockups. Signed-off-by: Scott Mayhew Cc: stable@vger.kernel.org Fixes: 0751ddf77b6a "lockd: Register callbacks on the inetaddr_chain..." Signed-off-by: J. Bruce Fields diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c index 154a107..fc4084e 100644 --- a/fs/lockd/svc.c +++ b/fs/lockd/svc.c @@ -335,12 +335,17 @@ static struct notifier_block lockd_inet6addr_notifier = { }; #endif -static void lockd_svc_exit_thread(void) +static void lockd_unregister_notifiers(void) { unregister_inetaddr_notifier(&lockd_inetaddr_notifier); #if IS_ENABLED(CONFIG_IPV6) unregister_inet6addr_notifier(&lockd_inet6addr_notifier); #endif +} + +static void lockd_svc_exit_thread(void) +{ + lockd_unregister_notifiers(); svc_exit_thread(nlmsvc_rqst); } @@ -462,7 +467,7 @@ int lockd_up(struct net *net) * Note: svc_serv structures have an initial use count of 1, * so we exit through here on both success and failure. */ -err_net: +err_put: svc_destroy(serv); err_create: mutex_unlock(&nlmsvc_mutex); @@ -470,7 +475,9 @@ err_create: err_start: lockd_down_net(serv, net); - goto err_net; +err_net: + lockd_unregister_notifiers(); + goto err_put; } EXPORT_SYMBOL_GPL(lockd_up); -- cgit v0.10.2 From 65c0554b73c920023cc8998802e508b798113b46 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 30 Jun 2016 18:11:41 +0200 Subject: x86/power/64: Fix kernel text mapping corruption during image restoration Logan Gunthorpe reports that hibernation stopped working reliably for him after commit ab76f7b4ab23 (x86/mm: Set NX on gap between __ex_table and rodata). That turns out to be a consequence of a long-standing issue with the 64-bit image restoration code on x86, which is that the temporary page tables set up by it to avoid page tables corruption when the last bits of the image kernel's memory contents are copied into their original page frames re-use the boot kernel's text mapping, but that mapping may very well get corrupted just like any other part of the page tables. Of course, if that happens, the final jump to the image kernel's entry point will go to nowhere. The exact reason why commit ab76f7b4ab23 matters here is that it sometimes causes a PMD of a large page to be split into PTEs that are allocated dynamically and get corrupted during image restoration as described above. To fix that issue note that the code copying the last bits of the image kernel's memory contents to the page frames occupied by them previoulsy doesn't use the kernel text mapping, because it runs from a special page covered by the identity mapping set up for that code from scratch. Hence, the kernel text mapping is only needed before that code starts to run and then it will only be used just for the final jump to the image kernel's entry point. Accordingly, the temporary page tables set up in swsusp_arch_resume() on x86-64 need to contain the kernel text mapping too. That mapping is only going to be used for the final jump to the image kernel, so it only needs to cover the image kernel's entry point, because the first thing the image kernel does after getting control back is to switch over to its own original page tables. Moreover, the virtual address of the image kernel's entry point in that mapping has to be the same as the one mapped by the image kernel's page tables. With that in mind, modify the x86-64's arch_hibernation_header_save() and arch_hibernation_header_restore() routines to pass the physical address of the image kernel's entry point (in addition to its virtual address) to the boot kernel (a small piece of assembly code involved in passing the entry point's virtual address to the image kernel is not necessary any more after that, so drop it). Update RESTORE_MAGIC too to reflect the image header format change. Next, in set_up_temporary_mappings(), use the physical and virtual addresses of the image kernel's entry point passed in the image header to set up a minimum kernel text mapping (using memory pages that won't be overwritten by the image kernel's memory contents) that will map those addresses to each other as appropriate. This makes the concern about the possible corruption of the original boot kernel text mapping go away and if the the minimum kernel text mapping used for the final jump marks the image kernel's entry point memory as executable, the jump to it is guaraneed to succeed. Fixes: ab76f7b4ab23 (x86/mm: Set NX on gap between __ex_table and rodata) Link: http://marc.info/?l=linux-pm&m=146372852823760&w=2 Reported-by: Logan Gunthorpe Reported-and-tested-by: Borislav Petkov Tested-by: Kees Cook Signed-off-by: Rafael J. Wysocki diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c index 009947d..f2b5e6a 100644 --- a/arch/x86/power/hibernate_64.c +++ b/arch/x86/power/hibernate_64.c @@ -19,6 +19,7 @@ #include #include #include +#include /* Defined in hibernate_asm_64.S */ extern asmlinkage __visible int restore_image(void); @@ -28,6 +29,7 @@ extern asmlinkage __visible int restore_image(void); * kernel's text (this value is passed in the image header). */ unsigned long restore_jump_address __visible; +unsigned long jump_address_phys; /* * Value of the cr3 register from before the hibernation (this value is passed @@ -37,7 +39,43 @@ unsigned long restore_cr3 __visible; pgd_t *temp_level4_pgt __visible; -void *relocated_restore_code __visible; +unsigned long relocated_restore_code __visible; + +static int set_up_temporary_text_mapping(void) +{ + pmd_t *pmd; + pud_t *pud; + + /* + * The new mapping only has to cover the page containing the image + * kernel's entry point (jump_address_phys), because the switch over to + * it is carried out by relocated code running from a page allocated + * specifically for this purpose and covered by the identity mapping, so + * the temporary kernel text mapping is only needed for the final jump. + * Moreover, in that mapping the virtual address of the image kernel's + * entry point must be the same as its virtual address in the image + * kernel (restore_jump_address), so the image kernel's + * restore_registers() code doesn't find itself in a different area of + * the virtual address space after switching over to the original page + * tables used by the image kernel. + */ + pud = (pud_t *)get_safe_page(GFP_ATOMIC); + if (!pud) + return -ENOMEM; + + pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); + if (!pmd) + return -ENOMEM; + + set_pmd(pmd + pmd_index(restore_jump_address), + __pmd((jump_address_phys & PMD_MASK) | __PAGE_KERNEL_LARGE_EXEC)); + set_pud(pud + pud_index(restore_jump_address), + __pud(__pa(pmd) | _KERNPG_TABLE)); + set_pgd(temp_level4_pgt + pgd_index(restore_jump_address), + __pgd(__pa(pud) | _KERNPG_TABLE)); + + return 0; +} static void *alloc_pgt_page(void *context) { @@ -59,9 +97,10 @@ static int set_up_temporary_mappings(void) if (!temp_level4_pgt) return -ENOMEM; - /* It is safe to reuse the original kernel mapping */ - set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), - init_level4_pgt[pgd_index(__START_KERNEL_map)]); + /* Prepare a temporary mapping for the kernel text */ + result = set_up_temporary_text_mapping(); + if (result) + return result; /* Set up the direct mapping from scratch */ for (i = 0; i < nr_pfn_mapped; i++) { @@ -78,19 +117,50 @@ static int set_up_temporary_mappings(void) return 0; } +static int relocate_restore_code(void) +{ + pgd_t *pgd; + pud_t *pud; + + relocated_restore_code = get_safe_page(GFP_ATOMIC); + if (!relocated_restore_code) + return -ENOMEM; + + memcpy((void *)relocated_restore_code, &core_restore_code, PAGE_SIZE); + + /* Make the page containing the relocated code executable */ + pgd = (pgd_t *)__va(read_cr3()) + pgd_index(relocated_restore_code); + pud = pud_offset(pgd, relocated_restore_code); + if (pud_large(*pud)) { + set_pud(pud, __pud(pud_val(*pud) & ~_PAGE_NX)); + } else { + pmd_t *pmd = pmd_offset(pud, relocated_restore_code); + + if (pmd_large(*pmd)) { + set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_NX)); + } else { + pte_t *pte = pte_offset_kernel(pmd, relocated_restore_code); + + set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_NX)); + } + } + __flush_tlb_all(); + + return 0; +} + int swsusp_arch_resume(void) { int error; /* We have got enough memory and from now on we cannot recover */ - if ((error = set_up_temporary_mappings())) + error = set_up_temporary_mappings(); + if (error) return error; - relocated_restore_code = (void *)get_safe_page(GFP_ATOMIC); - if (!relocated_restore_code) - return -ENOMEM; - memcpy(relocated_restore_code, &core_restore_code, - &restore_registers - &core_restore_code); + error = relocate_restore_code(); + if (error) + return error; restore_image(); return 0; @@ -109,11 +179,12 @@ int pfn_is_nosave(unsigned long pfn) struct restore_data_record { unsigned long jump_address; + unsigned long jump_address_phys; unsigned long cr3; unsigned long magic; }; -#define RESTORE_MAGIC 0x0123456789ABCDEFUL +#define RESTORE_MAGIC 0x123456789ABCDEF0UL /** * arch_hibernation_header_save - populate the architecture specific part @@ -126,7 +197,8 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size) if (max_size < sizeof(struct restore_data_record)) return -EOVERFLOW; - rdr->jump_address = restore_jump_address; + rdr->jump_address = (unsigned long)&restore_registers; + rdr->jump_address_phys = __pa_symbol(&restore_registers); rdr->cr3 = restore_cr3; rdr->magic = RESTORE_MAGIC; return 0; @@ -142,6 +214,7 @@ int arch_hibernation_header_restore(void *addr) struct restore_data_record *rdr = addr; restore_jump_address = rdr->jump_address; + jump_address_phys = rdr->jump_address_phys; restore_cr3 = rdr->cr3; return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL; } diff --git a/arch/x86/power/hibernate_asm_64.S b/arch/x86/power/hibernate_asm_64.S index 4400a43..3177c2b 100644 --- a/arch/x86/power/hibernate_asm_64.S +++ b/arch/x86/power/hibernate_asm_64.S @@ -44,9 +44,6 @@ ENTRY(swsusp_arch_suspend) pushfq popq pt_regs_flags(%rax) - /* save the address of restore_registers */ - movq $restore_registers, %rax - movq %rax, restore_jump_address(%rip) /* save cr3 */ movq %cr3, %rax movq %rax, restore_cr3(%rip) @@ -57,31 +54,34 @@ ENTRY(swsusp_arch_suspend) ENDPROC(swsusp_arch_suspend) ENTRY(restore_image) - /* switch to temporary page tables */ - movq $__PAGE_OFFSET, %rdx - movq temp_level4_pgt(%rip), %rax - subq %rdx, %rax - movq %rax, %cr3 - /* Flush TLB */ - movq mmu_cr4_features(%rip), %rax - movq %rax, %rdx - andq $~(X86_CR4_PGE), %rdx - movq %rdx, %cr4; # turn off PGE - movq %cr3, %rcx; # flush TLB - movq %rcx, %cr3; - movq %rax, %cr4; # turn PGE back on - /* prepare to jump to the image kernel */ - movq restore_jump_address(%rip), %rax - movq restore_cr3(%rip), %rbx + movq restore_jump_address(%rip), %r8 + movq restore_cr3(%rip), %r9 + + /* prepare to switch to temporary page tables */ + movq temp_level4_pgt(%rip), %rax + movq mmu_cr4_features(%rip), %rbx /* prepare to copy image data to their original locations */ movq restore_pblist(%rip), %rdx + + /* jump to relocated restore code */ movq relocated_restore_code(%rip), %rcx jmpq *%rcx /* code below has been relocated to a safe page */ ENTRY(core_restore_code) + /* switch to temporary page tables */ + movq $__PAGE_OFFSET, %rcx + subq %rcx, %rax + movq %rax, %cr3 + /* flush TLB */ + movq %rbx, %rcx + andq $~(X86_CR4_PGE), %rcx + movq %rcx, %cr4; # turn off PGE + movq %cr3, %rcx; # flush TLB + movq %rcx, %cr3; + movq %rbx, %cr4; # turn PGE back on .Lloop: testq %rdx, %rdx jz .Ldone @@ -96,24 +96,17 @@ ENTRY(core_restore_code) /* progress to the next pbe */ movq pbe_next(%rdx), %rdx jmp .Lloop + .Ldone: /* jump to the restore_registers address from the image header */ - jmpq *%rax - /* - * NOTE: This assumes that the boot kernel's text mapping covers the - * image kernel's page containing restore_registers and the address of - * this page is the same as in the image kernel's text mapping (it - * should always be true, because the text mapping is linear, starting - * from 0, and is supposed to cover the entire kernel text for every - * kernel). - * - * code below belongs to the image kernel - */ + jmpq *%r8 + /* code below belongs to the image kernel */ + .align PAGE_SIZE ENTRY(restore_registers) FRAME_BEGIN /* go back to the original page tables */ - movq %rbx, %cr3 + movq %r9, %cr3 /* Flush TLB, including "global" things (vmalloc) */ movq mmu_cr4_features(%rip), %rax -- cgit v0.10.2 From b403f0e37a11f84f7ceaf40b0075499e5bcfd220 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 29 Jun 2016 10:54:23 +0200 Subject: 9p: use file_dentry() v9fs may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. In this case it's a NULL pointer dereference in p9_fid_create(). Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Reported-by: Alessio Igor Bogani Signed-off-by: Miklos Szeredi Tested-by: Alessio Igor Bogani Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: Signed-off-by: Al Viro diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index b84c291..d7b78d5 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -74,7 +74,7 @@ int v9fs_file_open(struct inode *inode, struct file *file) v9fs_proto_dotu(v9ses)); fid = file->private_data; if (!fid) { - fid = v9fs_fid_clone(file->f_path.dentry); + fid = v9fs_fid_clone(file_dentry(file)); if (IS_ERR(fid)) return PTR_ERR(fid); @@ -100,7 +100,7 @@ int v9fs_file_open(struct inode *inode, struct file *file) * because we want write after unlink usecase * to work. */ - fid = v9fs_writeback_fid(file->f_path.dentry); + fid = v9fs_writeback_fid(file_dentry(file)); if (IS_ERR(fid)) { err = PTR_ERR(fid); mutex_unlock(&v9inode->v_mutex); @@ -516,7 +516,7 @@ v9fs_mmap_file_mmap(struct file *filp, struct vm_area_struct *vma) * because we want write after unlink usecase * to work. */ - fid = v9fs_writeback_fid(filp->f_path.dentry); + fid = v9fs_writeback_fid(file_dentry(filp)); if (IS_ERR(fid)) { retval = PTR_ERR(fid); mutex_unlock(&v9inode->v_mutex); -- cgit v0.10.2 From e06b933e6ded42384164d28a2060b7f89243b895 Mon Sep 17 00:00:00 2001 From: Andrey Ulanov Date: Fri, 15 Apr 2016 14:24:41 -0700 Subject: namespace: update event counter when umounting a deleted dentry - m_start() in fs/namespace.c expects that ns->event is incremented each time a mount added or removed from ns->list. - umount_tree() removes items from the list but does not increment event counter, expecting that it's done before the function is called. - There are some codepaths that call umount_tree() without updating "event" counter. e.g. from __detach_mounts(). - When this happens m_start may reuse a cached mount structure that no longer belongs to ns->list (i.e. use after free which usually leads to infinite loop). This change fixes the above problem by incrementing global event counter before invoking umount_tree(). Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589 Cc: stable@vger.kernel.org Signed-off-by: Andrey Ulanov Signed-off-by: Al Viro diff --git a/fs/namespace.c b/fs/namespace.c index 4fb1691..298618b 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1562,6 +1562,7 @@ void __detach_mounts(struct dentry *dentry) goto out_unlock; lock_mount_hash(); + event++; while (!hlist_empty(&mp->m_list)) { mnt = hlist_entry(mp->m_list.first, struct mount, mnt_mp_list); if (mnt->mnt.mnt_flags & MNT_UMOUNT) { -- cgit v0.10.2 From 1ead852dd88779eda12cb09cc894a03d9abfe1ec Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 16 Jun 2016 19:13:49 +0200 Subject: x86/amd_nb: Fix boot crash on non-AMD systems Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by: Tony Battersby Signed-off-by: Borislav Petkov Cc: Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index a147e67..e991d5c 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -71,8 +71,8 @@ int amd_cache_northbridges(void) while ((misc = next_northbridge(misc, amd_nb_misc_ids)) != NULL) i++; - if (i == 0) - return 0; + if (!i) + return -ENODEV; nb = kzalloc(i * sizeof(struct amd_northbridge), GFP_KERNEL); if (!nb) -- cgit v0.10.2 From c76a093dc1415d364020b8b33f1e194ef4d26fd0 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 1 Jul 2016 12:46:01 +0900 Subject: x86/Documentation: Fix various typos in Documentation/x86/ files Signed-off-by: Masanari Iida Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20160701034601.30308-1-standby24x7@gmail.com Signed-off-by: Ingo Molnar diff --git a/Documentation/x86/intel_mpx.txt b/Documentation/x86/intel_mpx.txt index 1a5a121..85d0549 100644 --- a/Documentation/x86/intel_mpx.txt +++ b/Documentation/x86/intel_mpx.txt @@ -45,7 +45,7 @@ is how we expect the compiler, application and kernel to work together. MPX-instrumented. 3) The kernel detects that the CPU has MPX, allows the new prctl() to succeed, and notes the location of the bounds directory. Userspace is - expected to keep the bounds directory at that locationWe note it + expected to keep the bounds directory at that location. We note it instead of reading it each time because the 'xsave' operation needed to access the bounds directory register is an expensive operation. 4) If the application needs to spill bounds out of the 4 registers, it @@ -167,7 +167,7 @@ If a #BR is generated due to a bounds violation caused by MPX. We need to decode MPX instructions to get violation address and set this address into extended struct siginfo. -The _sigfault feild of struct siginfo is extended as follow: +The _sigfault field of struct siginfo is extended as follow: 87 /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ 88 struct { @@ -240,5 +240,5 @@ them at the same bounds table. This is allowed architecturally. See more information "Intel(R) Architecture Instruction Set Extensions Programming Reference" (9.3.4). -However, if users did this, the kernel might be fooled in to unmaping an +However, if users did this, the kernel might be fooled in to unmapping an in-use bounds table since it does not recognize sharing. diff --git a/Documentation/x86/tlb.txt b/Documentation/x86/tlb.txt index 39d1723..6a0607b 100644 --- a/Documentation/x86/tlb.txt +++ b/Documentation/x86/tlb.txt @@ -5,7 +5,7 @@ memory, it has two choices: from areas other than the one we are trying to flush will be destroyed and must be refilled later, at some cost. 2. Use the invlpg instruction to invalidate a single page at a - time. This could potentialy cost many more instructions, but + time. This could potentially cost many more instructions, but it is a much more precise operation, causing no collateral damage to other TLB entries. @@ -19,7 +19,7 @@ Which method to do depends on a few things: work. 3. The size of the TLB. The larger the TLB, the more collateral damage we do with a full flush. So, the larger the TLB, the - more attrative an individual flush looks. Data and + more attractive an individual flush looks. Data and instructions have separate TLBs, as do different page sizes. 4. The microarchitecture. The TLB has become a multi-level cache on modern CPUs, and the global flushes have become more diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck index b1fb302..d0648a7 100644 --- a/Documentation/x86/x86_64/machinecheck +++ b/Documentation/x86/x86_64/machinecheck @@ -36,7 +36,7 @@ between all CPUs. check_interval How often to poll for corrected machine check errors, in seconds - (Note output is hexademical). Default 5 minutes. When the poller + (Note output is hexadecimal). Default 5 minutes. When the poller finds MCEs it triggers an exponential speedup (poll more often) on the polling interval. When the poller stops finding MCEs, it triggers an exponential backoff (poll less often) on the polling -- cgit v0.10.2 From 9216a97a12b069c62f0e927a9f54be4883648a0f Mon Sep 17 00:00:00 2001 From: Sony Chacko Date: Wed, 29 Jun 2016 17:51:34 -0400 Subject: qlcnic: add wmb() call in transmit data path. Call wmb() to ensure writes are complete before hardware fetches updated Tx descriptors. Signed-off-by: Sony Chacko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 607bb7d..87c642d 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -772,6 +772,8 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_ring->tx_stats.tx_bytes += skb->len; tx_ring->tx_stats.xmit_called++; + /* Ensure writes are complete before HW fetches Tx descriptors */ + wmb(); qlcnic_update_cmd_producer(tx_ring); return NETDEV_TX_OK; -- cgit v0.10.2 From 8293c8a3bb068bd2d2dfe00b6b0000a8fc5c860a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Jun 2016 11:44:28 +0100 Subject: phy: miphy28lp: Inform the reset framework that our reset line may be shared On the STiH410 B2120 development board the MiPHY28lp shares its reset line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device (DRD). New functionality in the reset subsystems forces consumers to be explicit when requesting shared/exclusive reset lines. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index 3acd2a1..213e2e1 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1143,7 +1143,8 @@ static int miphy28lp_probe_resets(struct device_node *node, struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; int err; - miphy_phy->miphy_rst = of_reset_control_get(node, "miphy-sw-rst"); + miphy_phy->miphy_rst = + of_reset_control_get_shared(node, "miphy-sw-rst"); if (IS_ERR(miphy_phy->miphy_rst)) { dev_err(miphy_dev->dev, -- cgit v0.10.2 From f5f35830fb84364a24794fe6c7101f85318481d2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:33:55 +0100 Subject: phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Kishon Vijay Abraham I Signed-off-by: Lee Jones diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c index 53cf8d1..b1f44ab 100644 --- a/drivers/phy/phy-stih407-usb.c +++ b/drivers/phy/phy-stih407-usb.c @@ -111,7 +111,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev) return PTR_ERR(phy_dev->rstc); } - phy_dev->rstport = devm_reset_control_get(dev, "port"); + phy_dev->rstport = devm_reset_control_get_exclusive(dev, "port"); if (IS_ERR(phy_dev->rstport)) { dev_err(dev, "failed to ctrl picoPHY reset\n"); return PTR_ERR(phy_dev->rstport); -- cgit v0.10.2 From 5baaf3b9efe127d239038de9219d381f4d882b26 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 28 Jun 2016 09:24:40 +0100 Subject: usb: dwc3: st: Use explicit reset_control_get_exclusive() API We're making all reset line users specify whether their lines are shared with other IP or they operate them exclusively. In this case the line is exclusively used only by this IP, so use the *_exclusive() API accordingly. Acked-by: Felipe Balbi Signed-off-by: Lee Jones diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index b204617..e77bacb 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -227,7 +227,8 @@ static int st_dwc3_probe(struct platform_device *pdev) dev_vdbg(&pdev->dev, "glue-logic addr 0x%p, syscfg-reg offset 0x%x\n", dwc3_data->glue_base, dwc3_data->syscfg_reg_off); - dwc3_data->rstc_pwrdn = devm_reset_control_get(dev, "powerdown"); + dwc3_data->rstc_pwrdn = + devm_reset_control_get_exclusive(dev, "powerdown"); if (IS_ERR(dwc3_data->rstc_pwrdn)) { dev_err(&pdev->dev, "could not get power controller\n"); ret = PTR_ERR(dwc3_data->rstc_pwrdn); -- cgit v0.10.2 From f95ae8a0edba1cb85110df4f1c96786419a0472f Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 30 Jun 2016 15:33:35 +0800 Subject: r8152: clear LINK_OFF_WAKE_EN after autoresume LINK_OFF_WAKE_EN should be cleared after autoresume, otherwise after system suspend, the system would wake up when linking off occurs. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 4e257b8..d7f20a9 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2421,7 +2421,18 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); } else { + u32 ocp_data; + __rtl_set_wol(tp, tp->saved_wolopts); + + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); + ocp_data &= ~LINK_OFF_WAKE_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); + + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); + r8153_u2p3en(tp, true); r8153_u1u2en(tp, true); } -- cgit v0.10.2 From 3d8c4530e50dc030efcec575aa69483439fc6fda Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Thu, 30 Jun 2016 10:36:15 +0100 Subject: net: mvneta: fix open() error cleanup If mvneta_mdio_probe() fails, a kernel warning is triggered due to missing cleanup in the error path. Add the necessary cleanup. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 281 at kernel/irq/manage.c:1814 __free_percpu_irq+0xfc/0x130 percpu IRQ 38 still enabled on CPU0! Modules linked in: bnep bluetooth xhci_plat_hcd xhci_hcd marvell_cesa armada_thermal des_generic ehci_orion mcp3021 spi_orion sfp mdio_i2c evbug fuse CPU: 1 PID: 281 Comm: connmand Not tainted 4.7.0-rc2+ #53 Hardware name: Marvell Armada 380/385 (Device Tree) Backtrace: [] (dump_backtrace) from [] (show_stack+0x18/0x1c) r6:60010093 r5:ffffffff r4:00000000 r3:dc8ba500 [] (show_stack) from [] (dump_stack+0xa4/0xdc) [] (dump_stack) from [] (__warn+0xd8/0x104) r6:c081e6a0 r5:00000000 r4:edfe5d50 r3:dc8ba500 [] (__warn) from [] (warn_slowpath_fmt+0x40/0x48) r10:a0010013 r8:c09356f8 r7:00000026 r6:ef11a260 r5:edd7b980 r4:ef11a200 [] (warn_slowpath_fmt) from [] (__free_percpu_irq+0xfc/0x130) r3:00000026 r2:c081e7ac [] (__free_percpu_irq) from [] (free_percpu_irq+0x48/0x74) r10:00008914 r8:00000000 r7:ffffffed r6:c09356f8 r5:00000026 r4:ef11a200 [] (free_percpu_irq) from [] (mvneta_open+0x118/0x134) r6:ffffffed r5:ef01e640 r4:ef01e000 r3:ef01e000 [] (mvneta_open) from [] (__dev_open+0xa4/0x108) r7:ef01e030 r6:c06ff3d8 r5:ffff9003 r4:ef01e000 [] (__dev_open) from [] (__dev_change_flags+0x94/0x150) r7:00001002 r6:00000001 r5:ffff9003 r4:ef01e000 [] (__dev_change_flags) from [] (dev_change_flags+0x20/0x50) r8:00000000 r7:c09334c8 r6:00001002 r5:00000148 r4:ef01e000 r3:00008914 [] (dev_change_flags) from [] (devinet_ioctl+0x6f4/0x7e0) r8:00000000 r7:c09334c8 r6:00000000 r5:ee87200c r4:00000000 r3:00008914 [] (devinet_ioctl) from [] (inet_ioctl+0x1b8/0x1c8) r10:beb4499c r9:edfe4000 r8:ecf13280 r7:c096cf00 r6:beb4499c r5:eef7c240 r4:00008914 [] (inet_ioctl) from [] (sock_ioctl+0x78/0x300) [] (sock_ioctl) from [] (do_vfs_ioctl+0x98/0xa60) r7:00000011 r6:00008914 r5:00000011 r4:c01568d0 [] (do_vfs_ioctl) from [] (SyS_ioctl+0x3c/0x60) r10:00000000 r9:edfe4000 r8:beb4499c r7:00000011 r6:00008914 r5:ecf13280 r4:ecf13280 [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c) r8:c0010004 r7:00000036 r6:00000011 r5:000a2978 r4:00000000 r3:00009003 ---[ end trace 711f625d5b04b3a7 ]--- Signed-off-by: Russell King Tested-by: Jon Nettleton Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index a6d26d3..d5d263b 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3458,6 +3458,8 @@ static int mvneta_open(struct net_device *dev) return 0; err_free_irq: + unregister_cpu_notifier(&pp->cpu_notifier); + on_each_cpu(mvneta_percpu_disable, pp, true); free_percpu_irq(pp->dev->irq, pp->ports); err_cleanup_txqs: mvneta_cleanup_txqs(pp); -- cgit v0.10.2 From fdfe3b32db70aa49d1d60a1ddd2280099174bddb Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Fri, 1 Jul 2016 09:49:05 +0800 Subject: ASoC: rt5645: fix reg-2f default value. The default value of reg-2f in codec rt5650 is 0x5002, not 0x1002. Signed-off-by: Bard Liao Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 3c6594d..d70847c 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -253,7 +253,7 @@ static const struct reg_default rt5650_reg[] = { { 0x2b, 0x5454 }, { 0x2c, 0xaaa0 }, { 0x2d, 0x0000 }, - { 0x2f, 0x1002 }, + { 0x2f, 0x5002 }, { 0x31, 0x5000 }, { 0x32, 0x0000 }, { 0x33, 0x0000 }, -- cgit v0.10.2 From f87fda00b6ed232a817c655b8d179b48bde8fdbe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 30 Jun 2016 16:13:41 +0200 Subject: bonding: prevent out of bound accesses ether_addr_equal_64bits() requires some care about its arguments, namely that 8 bytes might be read, even if last 2 byte values are not used. KASan detected a violation with null_mac_addr and lacpdu_mcast_addr in bond_3ad.c Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c : Although the 8-byte alignment was there, KASan would detect out of bound accesses. Fixes: 815117adaf5b ("bonding: use ether_addr_equal_unaligned for bond addr compare") Fixes: bb54e58929f3 ("bonding: Verify RX LACPDU has proper dest mac-addr") Fixes: 885a136c52a8 ("bonding: use compare_ether_addr_64bits() in ALB") Signed-off-by: Eric Dumazet Reported-by: Dmitry Vyukov Acked-by: Dmitry Vyukov Acked-by: Nikolay Aleksandrov Acked-by: Ding Tianhong Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index ca81f46..edc70ff 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -101,11 +101,14 @@ enum ad_link_speed_type { #define MAC_ADDRESS_EQUAL(A, B) \ ether_addr_equal_64bits((const u8 *)A, (const u8 *)B) -static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } }; +static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = { + 0, 0, 0, 0, 0, 0 +}; static u16 ad_ticks_per_sec; static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000; -static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR; +static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned = + MULTICAST_LACPDU_ADDR; /* ================= main 802.3ad protocol functions ================== */ static int ad_lacpdu_send(struct port *port); @@ -1739,7 +1742,7 @@ static void ad_clear_agg(struct aggregator *aggregator) aggregator->is_individual = false; aggregator->actor_admin_aggregator_key = 0; aggregator->actor_oper_aggregator_key = 0; - aggregator->partner_system = null_mac_addr; + eth_zero_addr(aggregator->partner_system.mac_addr_value); aggregator->partner_system_priority = 0; aggregator->partner_oper_aggregator_key = 0; aggregator->receive_state = 0; @@ -1761,7 +1764,7 @@ static void ad_initialize_agg(struct aggregator *aggregator) if (aggregator) { ad_clear_agg(aggregator); - aggregator->aggregator_mac_address = null_mac_addr; + eth_zero_addr(aggregator->aggregator_mac_address.mac_addr_value); aggregator->aggregator_identifier = 0; aggregator->slave = NULL; } diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index c5ac160..551f0f8 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -42,13 +42,10 @@ -#ifndef __long_aligned -#define __long_aligned __attribute__((aligned((sizeof(long))))) -#endif -static const u8 mac_bcast[ETH_ALEN] __long_aligned = { +static const u8 mac_bcast[ETH_ALEN + 2] __long_aligned = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; -static const u8 mac_v6_allmcast[ETH_ALEN] __long_aligned = { +static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = { 0x33, 0x33, 0x00, 0x00, 0x00, 0x01 }; static const int alb_delta_in_ticks = HZ / ALB_TIMER_TICKS_PER_SEC; diff --git a/include/net/bonding.h b/include/net/bonding.h index 791800d..6360c25 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -34,6 +34,9 @@ #define BOND_DEFAULT_MIIMON 100 +#ifndef __long_aligned +#define __long_aligned __attribute__((aligned((sizeof(long))))) +#endif /* * Less bad way to call ioctl from within the kernel; this needs to be * done some other way to get the call out of interrupt context. @@ -138,7 +141,9 @@ struct bond_params { struct reciprocal_value reciprocal_packets_per_slave; u16 ad_actor_sys_prio; u16 ad_user_port_key; - u8 ad_actor_system[ETH_ALEN]; + + /* 2 bytes of padding : see ether_addr_equal_64bits() */ + u8 ad_actor_system[ETH_ALEN + 2]; }; struct bond_parm_tbl { -- cgit v0.10.2 From 0d834442cc247c7b3f3bd6019512ae03e96dd99a Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 30 Jun 2016 17:34:38 +0300 Subject: net/mlx5: Fix teardown errors that happen in pci error handler In case of internal error state we will simulate the commands status through the return value translation function, but we need to simulate all the teardown fw commands as successful so we will not have fw command failure prints. This also fix memory leaks that happen because we skip teardown stages due to failed fw commands. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 0b49862..fda43bc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -295,6 +295,12 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_DESTROY_FLOW_GROUP: case MLX5_CMD_OP_DELETE_FLOW_TABLE_ENTRY: case MLX5_CMD_OP_DEALLOC_FLOW_COUNTER: + case MLX5_CMD_OP_2ERR_QP: + case MLX5_CMD_OP_2RST_QP: + case MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT: + case MLX5_CMD_OP_MODIFY_FLOW_TABLE: + case MLX5_CMD_OP_SET_FLOW_TABLE_ENTRY: + case MLX5_CMD_OP_SET_FLOW_TABLE_ROOT: return MLX5_CMD_STAT_OK; case MLX5_CMD_OP_QUERY_HCA_CAP: @@ -321,8 +327,6 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_RTR2RTS_QP: case MLX5_CMD_OP_RTS2RTS_QP: case MLX5_CMD_OP_SQERR2RTS_QP: - case MLX5_CMD_OP_2ERR_QP: - case MLX5_CMD_OP_2RST_QP: case MLX5_CMD_OP_QUERY_QP: case MLX5_CMD_OP_SQD_RTS_QP: case MLX5_CMD_OP_INIT2INIT_QP: @@ -342,7 +346,6 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_QUERY_ESW_VPORT_CONTEXT: case MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT: case MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT: - case MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT: case MLX5_CMD_OP_QUERY_ROCE_ADDRESS: case MLX5_CMD_OP_SET_ROCE_ADDRESS: case MLX5_CMD_OP_QUERY_HCA_VPORT_CONTEXT: @@ -390,11 +393,12 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op, case MLX5_CMD_OP_CREATE_RQT: case MLX5_CMD_OP_MODIFY_RQT: case MLX5_CMD_OP_QUERY_RQT: + case MLX5_CMD_OP_CREATE_FLOW_TABLE: case MLX5_CMD_OP_QUERY_FLOW_TABLE: case MLX5_CMD_OP_CREATE_FLOW_GROUP: case MLX5_CMD_OP_QUERY_FLOW_GROUP: - case MLX5_CMD_OP_SET_FLOW_TABLE_ENTRY: + case MLX5_CMD_OP_QUERY_FLOW_TABLE_ENTRY: case MLX5_CMD_OP_ALLOC_FLOW_COUNTER: case MLX5_CMD_OP_QUERY_FLOW_COUNTER: -- cgit v0.10.2 From c1d4d2e92ad670168a17a57dfa182a5a5baa72d4 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 30 Jun 2016 17:34:39 +0300 Subject: net/mlx5: Avoid calling sleeping function by the health poll thread In internal error state the health poll thread will eventually call synchronize_irq() (to safely trigger command completions) which might sleep, so we are calling sleeping function from atomic context which is invalid. Here we move trigger_cmd_completions(dev) to enter error state which is the earliest stage in error state handling. This way we won't need to wait for next health poll to trigger command completions and will solve the scheduling while atomic issue. mlx5_enter_error_state can be called from two contexts, protect it with dev->intf_state_lock Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 42d16b9..96a5946 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -108,15 +108,21 @@ static int in_fatal(struct mlx5_core_dev *dev) void mlx5_enter_error_state(struct mlx5_core_dev *dev) { + mutex_lock(&dev->intf_state_mutex); if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) - return; + goto unlock; mlx5_core_err(dev, "start\n"); - if (pci_channel_offline(dev->pdev) || in_fatal(dev)) + if (pci_channel_offline(dev->pdev) || in_fatal(dev)) { dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR; + trigger_cmd_completions(dev); + } mlx5_core_event(dev, MLX5_DEV_EVENT_SYS_ERROR, 0); mlx5_core_err(dev, "end\n"); + +unlock: + mutex_unlock(&dev->intf_state_mutex); } static void mlx5_handle_bad_state(struct mlx5_core_dev *dev) @@ -245,7 +251,6 @@ static void poll_health(unsigned long data) u32 count; if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { - trigger_cmd_completions(dev); mod_timer(&health->timer, get_next_poll_jiffies()); return; } -- cgit v0.10.2 From 5adff6a0886273eb426360400f120443833760a3 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 30 Jun 2016 17:34:40 +0300 Subject: net/mlx5: Fix incorrect page count when in internal error Change page cleanup flow when in internal error to properly decrement the page counts when reclaiming pages. The prevents timing out waiting for extra pages that were actually cleaned up previously. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c index 9eeee05..32dea35 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c @@ -345,7 +345,6 @@ retry: func_id, npages, err); goto out_4k; } - dev->priv.fw_pages += npages; err = mlx5_cmd_status_to_err(&out.hdr); if (err) { @@ -373,6 +372,33 @@ out_free: return err; } +static int reclaim_pages_cmd(struct mlx5_core_dev *dev, + struct mlx5_manage_pages_inbox *in, int in_size, + struct mlx5_manage_pages_outbox *out, int out_size) +{ + struct fw_page *fwp; + struct rb_node *p; + u32 npages; + u32 i = 0; + + if (dev->state != MLX5_DEVICE_STATE_INTERNAL_ERROR) + return mlx5_cmd_exec_check_status(dev, (u32 *)in, in_size, + (u32 *)out, out_size); + + npages = be32_to_cpu(in->num_entries); + + p = rb_first(&dev->priv.page_root); + while (p && i < npages) { + fwp = rb_entry(p, struct fw_page, rb_node); + out->pas[i] = cpu_to_be64(fwp->addr); + p = rb_next(p); + i++; + } + + out->num_entries = cpu_to_be32(i); + return 0; +} + static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, int *nclaimed) { @@ -398,15 +424,9 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, in.func_id = cpu_to_be16(func_id); in.num_entries = cpu_to_be32(npages); mlx5_core_dbg(dev, "npages %d, outlen %d\n", npages, outlen); - err = mlx5_cmd_exec(dev, &in, sizeof(in), out, outlen); + err = reclaim_pages_cmd(dev, &in, sizeof(in), out, outlen); if (err) { - mlx5_core_err(dev, "failed reclaiming pages\n"); - goto out_free; - } - dev->priv.fw_pages -= npages; - - if (out->hdr.status) { - err = mlx5_cmd_status_to_err(&out->hdr); + mlx5_core_err(dev, "failed reclaiming pages: err %d\n", err); goto out_free; } @@ -417,13 +437,15 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, err = -EINVAL; goto out_free; } - if (nclaimed) - *nclaimed = num_claimed; for (i = 0; i < num_claimed; i++) { addr = be64_to_cpu(out->pas[i]); free_4k(dev, addr); } + + if (nclaimed) + *nclaimed = num_claimed; + dev->priv.fw_pages -= num_claimed; if (func_id) dev->priv.vfs_pages -= num_claimed; @@ -514,14 +536,10 @@ int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev) p = rb_first(&dev->priv.page_root); if (p) { fwp = rb_entry(p, struct fw_page, rb_node); - if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { - free_4k(dev, fwp->addr); - nclaimed = 1; - } else { - err = reclaim_pages(dev, fwp->func_id, - optimal_reclaimed_pages(), - &nclaimed); - } + err = reclaim_pages(dev, fwp->func_id, + optimal_reclaimed_pages(), + &nclaimed); + if (err) { mlx5_core_warn(dev, "failed reclaiming pages (%d)\n", err); @@ -536,6 +554,13 @@ int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev) } } while (p); + WARN(dev->priv.fw_pages, + "FW pages counter is %d after reclaiming all pages\n", + dev->priv.fw_pages); + WARN(dev->priv.vfs_pages, + "VFs FW pages counter is %d after reclaiming all pages\n", + dev->priv.vfs_pages); + return 0; } -- cgit v0.10.2 From d57847dc4177c6fd8d950cb533f5edf0eab45b11 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 30 Jun 2016 17:34:41 +0300 Subject: net/mlx5: Fix wait_vital for VFs and remove fixed sleep The device ID for VFs is in a different location than PFs. This results in the poll always timing out for VFs. There's no good way to read the VF device ID without using the PF's configuration space. Switch to waiting for the health poll to start incrementing. Also remove the 1s sleep at the beginning. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index c65f4a1..6695893 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1422,46 +1422,31 @@ void mlx5_disable_device(struct mlx5_core_dev *dev) mlx5_pci_err_detected(dev->pdev, 0); } -/* wait for the device to show vital signs. For now we check - * that we can read the device ID and that the health buffer - * shows a non zero value which is different than 0xffffffff +/* wait for the device to show vital signs by waiting + * for the health counter to start counting. */ -static void wait_vital(struct pci_dev *pdev) +static int wait_vital(struct pci_dev *pdev) { struct mlx5_core_dev *dev = pci_get_drvdata(pdev); struct mlx5_core_health *health = &dev->priv.health; const int niter = 100; + u32 last_count = 0; u32 count; - u16 did; int i; - /* Wait for firmware to be ready after reset */ - msleep(1000); - for (i = 0; i < niter; i++) { - if (pci_read_config_word(pdev, 2, &did)) { - dev_warn(&pdev->dev, "failed reading config word\n"); - break; - } - if (did == pdev->device) { - dev_info(&pdev->dev, "device ID correctly read after %d iterations\n", i); - break; - } - msleep(50); - } - if (i == niter) - dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__); - for (i = 0; i < niter; i++) { count = ioread32be(health->health_counter); if (count && count != 0xffffffff) { - dev_info(&pdev->dev, "Counter value 0x%x after %d iterations\n", count, i); - break; + if (last_count && last_count != count) { + dev_info(&pdev->dev, "Counter value 0x%x after %d iterations\n", count, i); + return 0; + } + last_count = count; } msleep(50); } - if (i == niter) - dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__); + return -ETIMEDOUT; } static void mlx5_pci_resume(struct pci_dev *pdev) @@ -1473,7 +1458,11 @@ static void mlx5_pci_resume(struct pci_dev *pdev) dev_info(&pdev->dev, "%s was called\n", __func__); pci_save_state(pdev); - wait_vital(pdev); + err = wait_vital(pdev); + if (err) { + dev_err(&pdev->dev, "%s: wait_vital timed out\n", __func__); + return; + } err = mlx5_load_one(dev, priv); if (err) -- cgit v0.10.2 From 9cba4ebcf374c3772f6eb61f2d065294b2451b49 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 30 Jun 2016 17:34:42 +0300 Subject: net/mlx5: Fix potential deadlock in command mode change Call command completion handler in case of timeout when working in interrupts mode. Avoid flushing the commands workqueue after acquiring the semaphores to prevent a potential deadlock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index fda43bc..74067f5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -710,13 +710,13 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent) if (cmd->mode == CMD_MODE_POLLING) { wait_for_completion(&ent->done); - err = ent->ret; - } else { - if (!wait_for_completion_timeout(&ent->done, timeout)) - err = -ETIMEDOUT; - else - err = 0; + } else if (!wait_for_completion_timeout(&ent->done, timeout)) { + ent->ret = -ETIMEDOUT; + mlx5_cmd_comp_handler(dev, 1UL << ent->idx); } + + err = ent->ret; + if (err == -ETIMEDOUT) { mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n", mlx5_command_str(msg_to_opcode(ent->in)), @@ -774,28 +774,26 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in, goto out_free; } - if (!callback) { - err = wait_func(dev, ent); - if (err == -ETIMEDOUT) - goto out; - - ds = ent->ts2 - ent->ts1; - op = be16_to_cpu(((struct mlx5_inbox_hdr *)in->first.data)->opcode); - if (op < ARRAY_SIZE(cmd->stats)) { - stats = &cmd->stats[op]; - spin_lock_irq(&stats->lock); - stats->sum += ds; - ++stats->n; - spin_unlock_irq(&stats->lock); - } - mlx5_core_dbg_mask(dev, 1 << MLX5_CMD_TIME, - "fw exec time for %s is %lld nsec\n", - mlx5_command_str(op), ds); - *status = ent->status; - free_cmd(ent); - } + if (callback) + goto out; - return err; + err = wait_func(dev, ent); + if (err == -ETIMEDOUT) + goto out_free; + + ds = ent->ts2 - ent->ts1; + op = be16_to_cpu(((struct mlx5_inbox_hdr *)in->first.data)->opcode); + if (op < ARRAY_SIZE(cmd->stats)) { + stats = &cmd->stats[op]; + spin_lock_irq(&stats->lock); + stats->sum += ds; + ++stats->n; + spin_unlock_irq(&stats->lock); + } + mlx5_core_dbg_mask(dev, 1 << MLX5_CMD_TIME, + "fw exec time for %s is %lld nsec\n", + mlx5_command_str(op), ds); + *status = ent->status; out_free: free_cmd(ent); @@ -1185,41 +1183,30 @@ err_dbg: return err; } -void mlx5_cmd_use_events(struct mlx5_core_dev *dev) +static void mlx5_cmd_change_mod(struct mlx5_core_dev *dev, int mode) { struct mlx5_cmd *cmd = &dev->cmd; int i; for (i = 0; i < cmd->max_reg_cmds; i++) down(&cmd->sem); - down(&cmd->pages_sem); - flush_workqueue(cmd->wq); - - cmd->mode = CMD_MODE_EVENTS; + cmd->mode = mode; up(&cmd->pages_sem); for (i = 0; i < cmd->max_reg_cmds; i++) up(&cmd->sem); } -void mlx5_cmd_use_polling(struct mlx5_core_dev *dev) +void mlx5_cmd_use_events(struct mlx5_core_dev *dev) { - struct mlx5_cmd *cmd = &dev->cmd; - int i; - - for (i = 0; i < cmd->max_reg_cmds; i++) - down(&cmd->sem); - - down(&cmd->pages_sem); - - flush_workqueue(cmd->wq); - cmd->mode = CMD_MODE_POLLING; + mlx5_cmd_change_mod(dev, CMD_MODE_EVENTS); +} - up(&cmd->pages_sem); - for (i = 0; i < cmd->max_reg_cmds; i++) - up(&cmd->sem); +void mlx5_cmd_use_polling(struct mlx5_core_dev *dev) +{ + mlx5_cmd_change_mod(dev, CMD_MODE_POLLING); } static void free_msg(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *msg) -- cgit v0.10.2 From 65ee67084589c1783a74b4a4a5db38d7264ec8b5 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 30 Jun 2016 17:34:43 +0300 Subject: net/mlx5: Add timeout handle to commands with callback The current implementation does not handle timeout in case of command with callback request, and this can lead to deadlock if the command doesn't get fw response. Add delayed callback timeout work before posting the command to fw. In case of real fw command completion we will cancel the delayed work. In case of fw command timeout the callback timeout handler will be called and it will simulate fw completion with timeout error. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 74067f5..d6e2a1c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -606,11 +606,36 @@ static void dump_command(struct mlx5_core_dev *dev, pr_debug("\n"); } +static u16 msg_to_opcode(struct mlx5_cmd_msg *in) +{ + struct mlx5_inbox_hdr *hdr = (struct mlx5_inbox_hdr *)(in->first.data); + + return be16_to_cpu(hdr->opcode); +} + +static void cb_timeout_handler(struct work_struct *work) +{ + struct delayed_work *dwork = container_of(work, struct delayed_work, + work); + struct mlx5_cmd_work_ent *ent = container_of(dwork, + struct mlx5_cmd_work_ent, + cb_timeout_work); + struct mlx5_core_dev *dev = container_of(ent->cmd, struct mlx5_core_dev, + cmd); + + ent->ret = -ETIMEDOUT; + mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n", + mlx5_command_str(msg_to_opcode(ent->in)), + msg_to_opcode(ent->in)); + mlx5_cmd_comp_handler(dev, 1UL << ent->idx); +} + static void cmd_work_handler(struct work_struct *work) { struct mlx5_cmd_work_ent *ent = container_of(work, struct mlx5_cmd_work_ent, work); struct mlx5_cmd *cmd = ent->cmd; struct mlx5_core_dev *dev = container_of(cmd, struct mlx5_core_dev, cmd); + unsigned long cb_timeout = msecs_to_jiffies(MLX5_CMD_TIMEOUT_MSEC); struct mlx5_cmd_layout *lay; struct semaphore *sem; unsigned long flags; @@ -651,6 +676,9 @@ static void cmd_work_handler(struct work_struct *work) dump_command(dev, ent, 1); ent->ts1 = ktime_get_ns(); + if (ent->callback) + schedule_delayed_work(&ent->cb_timeout_work, cb_timeout); + /* ring doorbell after the descriptor is valid */ mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx); wmb(); @@ -695,13 +723,6 @@ static const char *deliv_status_to_str(u8 status) } } -static u16 msg_to_opcode(struct mlx5_cmd_msg *in) -{ - struct mlx5_inbox_hdr *hdr = (struct mlx5_inbox_hdr *)(in->first.data); - - return be16_to_cpu(hdr->opcode); -} - static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent) { unsigned long timeout = msecs_to_jiffies(MLX5_CMD_TIMEOUT_MSEC); @@ -765,6 +786,7 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in, if (!callback) init_completion(&ent->done); + INIT_DELAYED_WORK(&ent->cb_timeout_work, cb_timeout_handler); INIT_WORK(&ent->work, cmd_work_handler); if (page_queue) { cmd_work_handler(&ent->work); @@ -1242,6 +1264,8 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec) struct semaphore *sem; ent = cmd->ent_arr[i]; + if (ent->callback) + cancel_delayed_work(&ent->cb_timeout_work); if (ent->page_queue) sem = &cmd->pages_sem; else diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 80776d0..fd72ecf 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -629,6 +629,7 @@ struct mlx5_cmd_work_ent { void *uout; int uout_size; mlx5_cmd_cbk_t callback; + struct delayed_work cb_timeout_work; void *context; int idx; struct completion done; -- cgit v0.10.2 From 29429f3300a378f7c29583b4c2c2ef29e2190a69 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 30 Jun 2016 17:34:44 +0300 Subject: net/mlx5e: Timeout if SQ doesn't flush during close Avoid an infinite loop by timing out waiting for the SQ to flush. Also clean up the TX descriptors if that happens. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index baa991a..c22d8c8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -305,6 +305,7 @@ struct mlx5e_sq_dma { enum { MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, MLX5E_SQ_STATE_BF_ENABLE, + MLX5E_SQ_STATE_TX_TIMEOUT, }; struct mlx5e_ico_wqe_info { @@ -589,6 +590,7 @@ void mlx5e_cq_error_event(struct mlx5_core_cq *mcq, enum mlx5_event event); int mlx5e_napi_poll(struct napi_struct *napi, int budget); bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget); int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget); +void mlx5e_free_tx_descs(struct mlx5e_sq *sq); void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index cb6defd..b94c84b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -39,6 +39,13 @@ #include "eswitch.h" #include "vxlan.h" +enum { + MLX5_EN_QP_FLUSH_TIMEOUT_MS = 5000, + MLX5_EN_QP_FLUSH_MSLEEP_QUANT = 20, + MLX5_EN_QP_FLUSH_MAX_ITER = MLX5_EN_QP_FLUSH_TIMEOUT_MS / + MLX5_EN_QP_FLUSH_MSLEEP_QUANT, +}; + struct mlx5e_rq_param { u32 rqc[MLX5_ST_SZ_DW(rqc)]; struct mlx5_wq_param wq; @@ -782,6 +789,9 @@ static inline void netif_tx_disable_queue(struct netdev_queue *txq) static void mlx5e_close_sq(struct mlx5e_sq *sq) { + int tout = 0; + int err; + if (sq->txq) { clear_bit(MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, &sq->state); /* prevent netif_tx_wake_queue */ @@ -792,15 +802,24 @@ static void mlx5e_close_sq(struct mlx5e_sq *sq) if (mlx5e_sq_has_room_for(sq, 1)) mlx5e_send_nop(sq, true); - mlx5e_modify_sq(sq, MLX5_SQC_STATE_RDY, MLX5_SQC_STATE_ERR); + err = mlx5e_modify_sq(sq, MLX5_SQC_STATE_RDY, + MLX5_SQC_STATE_ERR); + if (err) + set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); } - while (sq->cc != sq->pc) /* wait till sq is empty */ - msleep(20); + /* wait till sq is empty, unless a TX timeout occurred on this SQ */ + while (sq->cc != sq->pc && + !test_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state)) { + msleep(MLX5_EN_QP_FLUSH_MSLEEP_QUANT); + if (tout++ > MLX5_EN_QP_FLUSH_MAX_ITER) + set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); + } /* avoid destroying sq before mlx5e_poll_tx_cq() is done with it */ napi_synchronize(&sq->channel->napi); + mlx5e_free_tx_descs(sq); mlx5e_disable_sq(sq); mlx5e_destroy_sq(sq); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 5a750b9cd..65e3bce 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -341,6 +341,35 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev) return mlx5e_sq_xmit(sq, skb); } +void mlx5e_free_tx_descs(struct mlx5e_sq *sq) +{ + struct mlx5e_tx_wqe_info *wi; + struct sk_buff *skb; + u16 ci; + int i; + + while (sq->cc != sq->pc) { + ci = sq->cc & sq->wq.sz_m1; + skb = sq->skb[ci]; + wi = &sq->wqe_info[ci]; + + if (!skb) { /* nop */ + sq->cc++; + continue; + } + + for (i = 0; i < wi->num_dma; i++) { + struct mlx5e_sq_dma *dma = + mlx5e_dma_get(sq, sq->dma_fifo_cc++); + + mlx5e_tx_dma_unmap(sq->pdev, dma); + } + + dev_kfree_skb_any(skb); + sq->cc += wi->num_wqebbs; + } +} + bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) { struct mlx5e_sq *sq; @@ -352,6 +381,9 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) sq = container_of(cq, struct mlx5e_sq, cq); + if (unlikely(test_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state))) + return false; + npkts = 0; nbytes = 0; -- cgit v0.10.2 From 3947ca1859999ac00698c0da0d233813a93d288a Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 30 Jun 2016 17:34:45 +0300 Subject: net/mlx5e: Implement ndo_tx_timeout callback Add callback to handle TX timeouts. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index c22d8c8..244aced 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -539,6 +539,7 @@ struct mlx5e_priv { struct workqueue_struct *wq; struct work_struct update_carrier_work; struct work_struct set_rx_mode_work; + struct work_struct tx_timeout_work; struct delayed_work update_stats_work; struct mlx5_core_dev *mdev; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index b94c84b..38c1286 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -98,6 +98,26 @@ static void mlx5e_update_carrier_work(struct work_struct *work) mutex_unlock(&priv->state_lock); } +static void mlx5e_tx_timeout_work(struct work_struct *work) +{ + struct mlx5e_priv *priv = container_of(work, struct mlx5e_priv, + tx_timeout_work); + int err; + + rtnl_lock(); + mutex_lock(&priv->state_lock); + if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) + goto unlock; + mlx5e_close_locked(priv->netdev); + err = mlx5e_open_locked(priv->netdev); + if (err) + netdev_err(priv->netdev, "mlx5e_open_locked failed recovering from a tx_timeout, err(%d).\n", + err); +unlock: + mutex_unlock(&priv->state_lock); + rtnl_unlock(); +} + static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) { struct mlx5e_sw_stats *s = &priv->stats.sw; @@ -2609,6 +2629,29 @@ static netdev_features_t mlx5e_features_check(struct sk_buff *skb, return features; } +static void mlx5e_tx_timeout(struct net_device *dev) +{ + struct mlx5e_priv *priv = netdev_priv(dev); + bool sched_work = false; + int i; + + netdev_err(dev, "TX timeout detected\n"); + + for (i = 0; i < priv->params.num_channels * priv->params.num_tc; i++) { + struct mlx5e_sq *sq = priv->txq_to_sq_map[i]; + + if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, i))) + continue; + sched_work = true; + set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); + netdev_err(dev, "TX timeout on queue: %d, SQ: 0x%x, CQ: 0x%x, SQ Cons: 0x%x SQ Prod: 0x%x\n", + i, sq->sqn, sq->cq.mcq.cqn, sq->cc, sq->pc); + } + + if (sched_work && test_bit(MLX5E_STATE_OPENED, &priv->state)) + schedule_work(&priv->tx_timeout_work); +} + static const struct net_device_ops mlx5e_netdev_ops_basic = { .ndo_open = mlx5e_open, .ndo_stop = mlx5e_close, @@ -2626,6 +2669,7 @@ static const struct net_device_ops mlx5e_netdev_ops_basic = { #ifdef CONFIG_RFS_ACCEL .ndo_rx_flow_steer = mlx5e_rx_flow_steer, #endif + .ndo_tx_timeout = mlx5e_tx_timeout, }; static const struct net_device_ops mlx5e_netdev_ops_sriov = { @@ -2655,6 +2699,7 @@ static const struct net_device_ops mlx5e_netdev_ops_sriov = { .ndo_get_vf_config = mlx5e_get_vf_config, .ndo_set_vf_link_state = mlx5e_set_vf_link_state, .ndo_get_vf_stats = mlx5e_get_vf_stats, + .ndo_tx_timeout = mlx5e_tx_timeout, }; static int mlx5e_check_required_hca_cap(struct mlx5_core_dev *mdev) @@ -2857,6 +2902,7 @@ static void mlx5e_build_netdev_priv(struct mlx5_core_dev *mdev, INIT_WORK(&priv->update_carrier_work, mlx5e_update_carrier_work); INIT_WORK(&priv->set_rx_mode_work, mlx5e_set_rx_mode_work); + INIT_WORK(&priv->tx_timeout_work, mlx5e_tx_timeout_work); INIT_DELAYED_WORK(&priv->update_stats_work, mlx5e_update_stats_work); } -- cgit v0.10.2 From 6cd392a082deca8accec5c50b5b3fc1a9de5bfa2 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 30 Jun 2016 17:34:46 +0300 Subject: net/mlx5e: Handle RQ flush in error cases Add a timeout to avoid an infinite loop waiting for RQ's to flush. This occurs during AER/EEH and will also happen if the device stops posting completions due to internal error or reset, or if moving the RQ to the error state fails. Also cleanup posted receive resources when closing the RQ. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 244aced..b429591 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -191,6 +191,7 @@ struct mlx5e_tstamp { enum { MLX5E_RQ_STATE_POST_WQES_ENABLE, MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, + MLX5E_RQ_STATE_FLUSH_TIMEOUT, }; struct mlx5e_cq { @@ -220,6 +221,8 @@ typedef void (*mlx5e_fp_handle_rx_cqe)(struct mlx5e_rq *rq, typedef int (*mlx5e_fp_alloc_wqe)(struct mlx5e_rq *rq, struct mlx5e_rx_wqe *wqe, u16 ix); +typedef void (*mlx5e_fp_dealloc_wqe)(struct mlx5e_rq *rq, u16 ix); + struct mlx5e_dma_info { struct page *page; dma_addr_t addr; @@ -241,6 +244,7 @@ struct mlx5e_rq { struct mlx5e_cq cq; mlx5e_fp_handle_rx_cqe handle_rx_cqe; mlx5e_fp_alloc_wqe alloc_wqe; + mlx5e_fp_dealloc_wqe dealloc_wqe; unsigned long state; int ix; @@ -592,12 +596,15 @@ int mlx5e_napi_poll(struct napi_struct *napi, int budget); bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget); int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget); void mlx5e_free_tx_descs(struct mlx5e_sq *sq); +void mlx5e_free_rx_descs(struct mlx5e_rq *rq); void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq); int mlx5e_alloc_rx_wqe(struct mlx5e_rq *rq, struct mlx5e_rx_wqe *wqe, u16 ix); int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, struct mlx5e_rx_wqe *wqe, u16 ix); +void mlx5e_dealloc_rx_wqe(struct mlx5e_rq *rq, u16 ix); +void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix); void mlx5e_post_rx_fragmented_mpwqe(struct mlx5e_rq *rq); void mlx5e_complete_rx_linear_mpwqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 38c1286..103feab 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -332,6 +332,7 @@ static int mlx5e_create_rq(struct mlx5e_channel *c, } rq->handle_rx_cqe = mlx5e_handle_rx_cqe_mpwrq; rq->alloc_wqe = mlx5e_alloc_rx_mpwqe; + rq->dealloc_wqe = mlx5e_dealloc_rx_mpwqe; rq->mpwqe_stride_sz = BIT(priv->params.mpwqe_log_stride_sz); rq->mpwqe_num_strides = BIT(priv->params.mpwqe_log_num_strides); @@ -347,6 +348,7 @@ static int mlx5e_create_rq(struct mlx5e_channel *c, } rq->handle_rx_cqe = mlx5e_handle_rx_cqe; rq->alloc_wqe = mlx5e_alloc_rx_wqe; + rq->dealloc_wqe = mlx5e_dealloc_rx_wqe; rq->wqe_sz = (priv->params.lro_en) ? priv->params.lro_wqe_sz : @@ -552,17 +554,25 @@ err_destroy_rq: static void mlx5e_close_rq(struct mlx5e_rq *rq) { + int tout = 0; + int err; + clear_bit(MLX5E_RQ_STATE_POST_WQES_ENABLE, &rq->state); napi_synchronize(&rq->channel->napi); /* prevent mlx5e_post_rx_wqes */ - mlx5e_modify_rq_state(rq, MLX5_RQC_STATE_RDY, MLX5_RQC_STATE_ERR); - while (!mlx5_wq_ll_is_empty(&rq->wq)) - msleep(20); + err = mlx5e_modify_rq_state(rq, MLX5_RQC_STATE_RDY, MLX5_RQC_STATE_ERR); + while (!mlx5_wq_ll_is_empty(&rq->wq) && !err && + tout++ < MLX5_EN_QP_FLUSH_MAX_ITER) + msleep(MLX5_EN_QP_FLUSH_MSLEEP_QUANT); + + if (err || tout == MLX5_EN_QP_FLUSH_MAX_ITER) + set_bit(MLX5E_RQ_STATE_FLUSH_TIMEOUT, &rq->state); /* avoid destroying rq before mlx5e_poll_rx_cq() is done with it */ napi_synchronize(&rq->channel->napi); mlx5e_disable_rq(rq); + mlx5e_free_rx_descs(rq); mlx5e_destroy_rq(rq); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 022acc2..9f2a16a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -212,6 +212,20 @@ err_free_skb: return -ENOMEM; } +void mlx5e_dealloc_rx_wqe(struct mlx5e_rq *rq, u16 ix) +{ + struct sk_buff *skb = rq->skb[ix]; + + if (skb) { + rq->skb[ix] = NULL; + dma_unmap_single(rq->pdev, + *((dma_addr_t *)skb->cb), + rq->wqe_sz, + DMA_FROM_DEVICE); + dev_kfree_skb(skb); + } +} + static inline int mlx5e_mpwqe_strides_per_page(struct mlx5e_rq *rq) { return rq->mpwqe_num_strides >> MLX5_MPWRQ_WQE_PAGE_ORDER; @@ -574,6 +588,30 @@ int mlx5e_alloc_rx_mpwqe(struct mlx5e_rq *rq, struct mlx5e_rx_wqe *wqe, u16 ix) return 0; } +void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix) +{ + struct mlx5e_mpw_info *wi = &rq->wqe_info[ix]; + + wi->free_wqe(rq, wi); +} + +void mlx5e_free_rx_descs(struct mlx5e_rq *rq) +{ + struct mlx5_wq_ll *wq = &rq->wq; + struct mlx5e_rx_wqe *wqe; + __be16 wqe_ix_be; + u16 wqe_ix; + + while (!mlx5_wq_ll_is_empty(wq)) { + wqe_ix_be = *wq->tail_next; + wqe_ix = be16_to_cpu(wqe_ix_be); + wqe = mlx5_wq_ll_get_wqe(&rq->wq, wqe_ix); + rq->dealloc_wqe(rq, wqe_ix); + mlx5_wq_ll_pop(&rq->wq, wqe_ix_be, + &wqe->next.next_wqe_index); + } +} + #define RQ_CANNOT_POST(rq) \ (!test_bit(MLX5E_RQ_STATE_POST_WQES_ENABLE, &rq->state) || \ test_bit(MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, &rq->state)) @@ -878,6 +916,9 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget) struct mlx5e_rq *rq = container_of(cq, struct mlx5e_rq, cq); int work_done = 0; + if (unlikely(test_bit(MLX5E_RQ_STATE_FLUSH_TIMEOUT, &rq->state))) + return 0; + if (cq->decmprs_left) work_done += mlx5e_decompress_cqes_cont(rq, cq, 0, budget); -- cgit v0.10.2 From e3a19b53cbb0e6738b7a547f262179065b72e3fa Mon Sep 17 00:00:00 2001 From: Matthew Finlay Date: Thu, 30 Jun 2016 17:34:47 +0300 Subject: net/mlx5e: Copy all L2 headers into inline segment ConnectX4-Lx uses an inline wqe mode that currently defaults to requiring the entire L2 header be included in the wqe. This patch fixes mlx5e_get_inline_hdr_size() to account for all L2 headers (VLAN, QinQ, etc) using skb_network_offset(skb). Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Matthew Finlay Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 65e3bce..42a5f06 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -123,7 +123,7 @@ static inline u16 mlx5e_get_inline_hdr_size(struct mlx5e_sq *sq, * headers and occur before the data gather. * Therefore these headers must be copied into the WQE */ -#define MLX5E_MIN_INLINE ETH_HLEN +#define MLX5E_MIN_INLINE (ETH_HLEN + VLAN_HLEN) if (bf) { u16 ihs = skb_headlen(skb); @@ -135,7 +135,7 @@ static inline u16 mlx5e_get_inline_hdr_size(struct mlx5e_sq *sq, return skb_headlen(skb); } - return MLX5E_MIN_INLINE; + return max(skb_network_offset(skb), MLX5E_MIN_INLINE); } static inline void mlx5e_tx_skb_pull_inline(unsigned char **skb_data, -- cgit v0.10.2 From 7ccdd0841b305323e10e779c476d3fbae2165756 Mon Sep 17 00:00:00 2001 From: Rana Shahout Date: Thu, 30 Jun 2016 17:34:48 +0300 Subject: net/mlx5e: Fix select queue callback The default fallback function used by mlx5e select queue can return any TX queues in range [0..dev->num_real_tx_queues). The current implementation assumes that the fallback function returns a number in the range [0.. number of channels). Actually dev->num_real_tx_queues = (number of channels) * dev->num_tc; which is more than the expected range if num_tc is configured and could lead to crashes. To fix this we test if num_tc is not configured we can safely return the fallback suggestion, if not we will reciprocal_scale the fallback result and normalize it to the desired range. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Rana Shahout Signed-off-by: Saeed Mahameed Reported-by: Doug Ledford Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 103feab..216fe3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1707,8 +1707,11 @@ static void mlx5e_netdev_set_tcs(struct net_device *netdev) netdev_set_num_tc(netdev, ntc); + /* Map netdev TCs to offset 0 + * We have our own UP to TXQ mapping for QoS + */ for (tc = 0; tc < ntc; tc++) - netdev_set_tc_queue(netdev, tc, nch, tc * nch); + netdev_set_tc_queue(netdev, tc, nch, 0); } int mlx5e_open_locked(struct net_device *netdev) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 42a5f06..5740b46 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -110,8 +110,20 @@ u16 mlx5e_select_queue(struct net_device *dev, struct sk_buff *skb, { struct mlx5e_priv *priv = netdev_priv(dev); int channel_ix = fallback(dev, skb); - int up = (netdev_get_num_tc(dev) && skb_vlan_tag_present(skb)) ? - skb->vlan_tci >> VLAN_PRIO_SHIFT : 0; + int up = 0; + + if (!netdev_get_num_tc(dev)) + return channel_ix; + + if (skb_vlan_tag_present(skb)) + up = skb->vlan_tci >> VLAN_PRIO_SHIFT; + + /* channel_ix can be larger than num_channels since + * dev->num_real_tx_queues = num_channels * num_tc + */ + if (channel_ix >= priv->params.num_channels) + channel_ix = reciprocal_scale(channel_ix, + priv->params.num_channels); return priv->channeltc_to_txq_map[channel_ix][up]; } -- cgit v0.10.2 From cdcf11212b22ff8e3de88ced1a6eda5bb950e120 Mon Sep 17 00:00:00 2001 From: Rana Shahout Date: Thu, 30 Jun 2016 17:34:49 +0300 Subject: net/mlx5e: Validate BW weight values of ETS Valid weight assigned to ETS TClass values are 1-100 Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Rana Shahout Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index b429591..943b1bd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -145,7 +145,6 @@ struct mlx5e_umr_wqe { #ifdef CONFIG_MLX5_CORE_EN_DCB #define MLX5E_MAX_BW_ALLOC 100 /* Max percentage of BW allocation */ -#define MLX5E_MIN_BW_ALLOC 1 /* Min percentage of BW allocation */ #endif struct mlx5e_params { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index b2db180..c585349 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -96,7 +96,7 @@ static void mlx5e_build_tc_tx_bw(struct ieee_ets *ets, u8 *tc_tx_bw, tc_tx_bw[i] = MLX5E_MAX_BW_ALLOC; break; case IEEE_8021QAZ_TSA_ETS: - tc_tx_bw[i] = ets->tc_tx_bw[i] ?: MLX5E_MIN_BW_ALLOC; + tc_tx_bw[i] = ets->tc_tx_bw[i]; break; } } @@ -140,8 +140,12 @@ static int mlx5e_dbcnl_validate_ets(struct ieee_ets *ets) /* Validate Bandwidth Sum */ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { - if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) + if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) { + if (!ets->tc_tx_bw[i]) + return -EINVAL; + bw_sum += ets->tc_tx_bw[i]; + } } if (bw_sum != 0 && bw_sum != 100) -- cgit v0.10.2 From 87424ad52d76535234f217637fcaadcd2ef2334d Mon Sep 17 00:00:00 2001 From: Shaker Daibes Date: Thu, 30 Jun 2016 17:34:50 +0300 Subject: net/mlx5e: Log link state changes Add Link UP/Down prints to kernel log when link state changes Signed-off-by: Shaker Daibes Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 216fe3e..7a0dca2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -81,10 +81,13 @@ static void mlx5e_update_carrier(struct mlx5e_priv *priv) port_state = mlx5_query_vport_state(mdev, MLX5_QUERY_VPORT_STATE_IN_OP_MOD_VNIC_VPORT, 0); - if (port_state == VPORT_STATE_UP) + if (port_state == VPORT_STATE_UP) { + netdev_info(priv->netdev, "Link up\n"); netif_carrier_on(priv->netdev); - else + } else { + netdev_info(priv->netdev, "Link down\n"); netif_carrier_off(priv->netdev); + } } static void mlx5e_update_carrier_work(struct work_struct *work) -- cgit v0.10.2 From 9cc1c73ad66610bffc80b691136ffc1e9a3b1a58 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 24 Apr 2016 01:18:21 +0200 Subject: netfilter: conntrack: avoid integer overflow when resizing Can overflow so we might allocate very small table when bucket count is high on a 32bit platform. Note: resize is only possible from init_netns. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index f204274..62c42e9 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1601,8 +1601,15 @@ void *nf_ct_alloc_hashtable(unsigned int *sizep, int nulls) unsigned int nr_slots, i; size_t sz; + if (*sizep > (UINT_MAX / sizeof(struct hlist_nulls_head))) + return NULL; + BUILD_BUG_ON(sizeof(struct hlist_nulls_head) != sizeof(struct hlist_head)); nr_slots = *sizep = roundup(*sizep, PAGE_SIZE / sizeof(struct hlist_nulls_head)); + + if (nr_slots > (UINT_MAX / sizeof(struct hlist_nulls_head))) + return NULL; + sz = nr_slots * sizeof(struct hlist_nulls_head); hash = (void *)__get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO, get_order(sz)); -- cgit v0.10.2 From 6343a2120862f7023006c8091ad95c1f16a32077 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 1 Jul 2016 14:56:07 +0200 Subject: locks: use file_inode() (Another one for the f_path debacle.) ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask. The reason is that generic_add_lease() used filp->f_path.dentry->inode while all the others use file_inode(). This makes a difference for files opened on overlayfs since the former will point to the overlay inode the latter to the underlying inode. So generic_add_lease() added the lease to the overlay inode and generic_delete_lease() removed it from the underlying inode. When the file was released the lease remained on the overlay inode's lock list, resulting in use after free. Reported-by: Eryu Guan Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: Signed-off-by: Miklos Szeredi Reviewed-by: Jeff Layton Signed-off-by: J. Bruce Fields diff --git a/fs/locks.c b/fs/locks.c index 7c5f91b..ee1b15f 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -1628,7 +1628,7 @@ generic_add_lease(struct file *filp, long arg, struct file_lock **flp, void **pr { struct file_lock *fl, *my_fl = NULL, *lease; struct dentry *dentry = filp->f_path.dentry; - struct inode *inode = dentry->d_inode; + struct inode *inode = file_inode(filp); struct file_lock_context *ctx; bool is_deleg = (*flp)->fl_flags & FL_DELEG; int error; -- cgit v0.10.2 From 8ba8682107ee2ca3347354e018865d8e1967c5f4 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Fri, 1 Jul 2016 00:39:35 -0700 Subject: block: fix use-after-free in sys_ioprio_get() get_task_ioprio() accesses the task->io_context without holding the task lock and thus can race with exit_io_context(), leading to a use-after-free. The reproducer below hits this within a few seconds on my 4-core QEMU VM: #define _GNU_SOURCE #include #include #include #include int main(int argc, char **argv) { pid_t pid, child; long nproc, i; /* ioprio_set(IOPRIO_WHO_PROCESS, 0, IOPRIO_PRIO_VALUE(IOPRIO_CLASS_IDLE, 0)); */ syscall(SYS_ioprio_set, 1, 0, 0x6000); nproc = sysconf(_SC_NPROCESSORS_ONLN); for (i = 0; i < nproc; i++) { pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { pid = fork(); assert(pid != -1); if (pid == 0) { _exit(0); } else { child = wait(NULL); assert(child == pid); } } } pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } } } for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } return 0; } This gets us KASAN dumps like this: [ 35.526914] ================================================================== [ 35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c [ 35.530009] Read of size 2 by task ioprio-gpf/363 [ 35.530009] ============================================================================= [ 35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected [ 35.530009] ----------------------------------------------------------------------------- [ 35.530009] Disabling lock debugging due to kernel taint [ 35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360 [ 35.530009] ___slab_alloc+0x55d/0x5a0 [ 35.530009] __slab_alloc.isra.20+0x2b/0x40 [ 35.530009] kmem_cache_alloc_node+0x84/0x200 [ 35.530009] create_task_io_context+0x2b/0x370 [ 35.530009] get_task_io_context+0x92/0xb0 [ 35.530009] copy_process.part.8+0x5029/0x5660 [ 35.530009] _do_fork+0x155/0x7e0 [ 35.530009] SyS_clone+0x19/0x20 [ 35.530009] do_syscall_64+0x195/0x3a0 [ 35.530009] return_from_SYSCALL_64+0x0/0x6a [ 35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060 [ 35.530009] __slab_free+0x27b/0x3d0 [ 35.530009] kmem_cache_free+0x1fb/0x220 [ 35.530009] put_io_context+0xe7/0x120 [ 35.530009] put_io_context_active+0x238/0x380 [ 35.530009] exit_io_context+0x66/0x80 [ 35.530009] do_exit+0x158e/0x2b90 [ 35.530009] do_group_exit+0xe5/0x2b0 [ 35.530009] SyS_exit_group+0x1d/0x20 [ 35.530009] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080 [ 35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001 [ 35.530009] ================================================================== Fix it by grabbing the task lock while we poke at the io_context. Cc: stable@vger.kernel.org Reported-by: Dmitry Vyukov Signed-off-by: Omar Sandoval Signed-off-by: Jens Axboe diff --git a/block/ioprio.c b/block/ioprio.c index cc7800e..01b8116 100644 --- a/block/ioprio.c +++ b/block/ioprio.c @@ -150,8 +150,10 @@ static int get_task_ioprio(struct task_struct *p) if (ret) goto out; ret = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, IOPRIO_NORM); + task_lock(p); if (p->io_context) ret = p->io_context->ioprio; + task_unlock(p); out: return ret; } -- cgit v0.10.2 From a9cd9c044aa90ba2b31d1bf3e3432f38fb1d25fe Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 16:31:01 -0700 Subject: drm/vmwgfx: Add a check to handle host message failure Discovered by static code analysis tool. If for some reason communication with the host fails more than preset number of retries, return an error instead of return garbage. Signed-off-by: Sinclair Yeh Reviewed-by: Charmaine Lee Reported-by: Dan Carpenter diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c index f0374f9..e57a0ba 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c @@ -300,6 +300,9 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg, break; } + if (retries == RETRIES) + return -EINVAL; + *msg_len = reply_len; *msg = reply; -- cgit v0.10.2 From 7c20d213dd3cd6295bf9162730e7a368af957854 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 11:29:47 -0700 Subject: drm/vmwgfx: Work around mode set failure in 2D VMs In a low-memory 2D VM, fbdev can take up a large percentage of available memory, making them unavailable for other DRM clients. Since we do not take fbdev into account when filtering modes, we end up claiming to support more modes than we actually do. As a result, users get a black screen when setting a mode too large for current available memory. In a low-memory VM configuration, users can get a black screen for a mode as low as 1024x768. The current mode filtering mechanism keys off of SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB, i.e. the maximum amount of surface memory we have. Since this value is a performance suggestion, not a hard limit, and since there should not be much of a performance impact for a 2D VM, rather than filtering out more modes, we will just allow ourselves to exceed the SVGA's performance suggestion. Also changed assumed bpp to 32 from 16 to make sure we can actually support all the modes listed. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 9fcd820..fc9ad00 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -706,6 +706,13 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) vmw_read(dev_priv, SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB); + /* + * Workaround for low memory 2D VMs to compensate for the + * allocation taken by fbdev + */ + if (!(dev_priv->capabilities & SVGA_CAP_3D)) + mem_size *= 2; + dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->prim_bb_mem = vmw_read(dev_priv, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 55231cc..077f16d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1553,14 +1553,7 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }; int i; - u32 assumed_bpp = 2; - - /* - * If using screen objects, then assume 32-bpp because that's what the - * SVGA device is assuming - */ - if (dev_priv->active_display_unit == vmw_du_screen_object) - assumed_bpp = 4; + u32 assumed_bpp = 4; if (dev_priv->active_display_unit == vmw_du_screen_target) { max_width = min(max_width, dev_priv->stdu_max_width); -- cgit v0.10.2 From 04319d89fbec72dfd60738003c3813b97c1d5f5a Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 12:15:48 -0700 Subject: drm/vmwgfx: Add an option to change assumed FB bpp Offer an option for advanced users who want larger modes at 16bpp. This becomes necessary after the fix: "Work around mode set failure in 2D VMs." Without this patch, there would be no way for existing advanced users to get to a high res mode, and the regression is they will likely get a black screen after a software update on their current VM. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index fc9ad00..8d528fc 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -233,6 +233,7 @@ static int vmw_force_iommu; static int vmw_restrict_iommu; static int vmw_force_coherent; static int vmw_restrict_dma_mask; +static int vmw_assume_16bpp; static int vmw_probe(struct pci_dev *, const struct pci_device_id *); static void vmw_master_init(struct vmw_master *); @@ -249,6 +250,8 @@ MODULE_PARM_DESC(force_coherent, "Force coherent TTM pages"); module_param_named(force_coherent, vmw_force_coherent, int, 0600); MODULE_PARM_DESC(restrict_dma_mask, "Restrict DMA mask to 44 bits with IOMMU"); module_param_named(restrict_dma_mask, vmw_restrict_dma_mask, int, 0600); +MODULE_PARM_DESC(assume_16bpp, "Assume 16-bpp when filtering modes"); +module_param_named(assume_16bpp, vmw_assume_16bpp, int, 0600); static void vmw_print_capabilities(uint32_t capabilities) @@ -660,6 +663,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->vram_start = pci_resource_start(dev->pdev, 1); dev_priv->mmio_start = pci_resource_start(dev->pdev, 2); + dev_priv->assume_16bpp = !!vmw_assume_16bpp; + dev_priv->enable_fb = enable_fbdev; vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 1980e2a..89fb194 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -386,6 +386,7 @@ struct vmw_private { spinlock_t hw_lock; spinlock_t cap_lock; bool has_dx; + bool assume_16bpp; /* * VGA registers. diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 077f16d..e29da45 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1555,6 +1555,9 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector, int i; u32 assumed_bpp = 4; + if (dev_priv->assume_16bpp) + assumed_bpp = 2; + if (dev_priv->active_display_unit == vmw_du_screen_target) { max_width = min(max_width, dev_priv->stdu_max_width); max_height = min(max_height, dev_priv->stdu_max_height); -- cgit v0.10.2 From 94477bff390aa4612d2332c8abafaae0a13d6923 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 12:58:49 -0700 Subject: drm/ttm: Make ttm_bo_mem_compat available There are cases where it is desired to see if a proposed placement is compatible with a buffer object before calling ttm_bo_validate(). Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: --- This is the first of a 3-patch series to fix a black screen issue observed on Ubuntu 16.04 server. diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 39386f5..a71cf98 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -1034,9 +1034,9 @@ out_unlock: return ret; } -static bool ttm_bo_mem_compat(struct ttm_placement *placement, - struct ttm_mem_reg *mem, - uint32_t *new_flags) +bool ttm_bo_mem_compat(struct ttm_placement *placement, + struct ttm_mem_reg *mem, + uint32_t *new_flags) { int i; @@ -1068,6 +1068,7 @@ static bool ttm_bo_mem_compat(struct ttm_placement *placement, return false; } +EXPORT_SYMBOL(ttm_bo_mem_compat); int ttm_bo_validate(struct ttm_buffer_object *bo, struct ttm_placement *placement, diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index c801d90..4cecb0b 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -316,6 +316,20 @@ ttm_bo_reference(struct ttm_buffer_object *bo) */ extern int ttm_bo_wait(struct ttm_buffer_object *bo, bool interruptible, bool no_wait); + +/** + * ttm_bo_mem_compat - Check if proposed placement is compatible with a bo + * + * @placement: Return immediately if buffer is busy. + * @mem: The struct ttm_mem_reg indicating the region where the bo resides + * @new_flags: Describes compatible placement found + * + * Returns true if the placement is compatible + */ +extern bool ttm_bo_mem_compat(struct ttm_placement *placement, + struct ttm_mem_reg *mem, + uint32_t *new_flags); + /** * ttm_bo_validate * -- cgit v0.10.2 From 4ed7e2242b637bc4af0416e4aa9f945db30fb44a Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 13:20:26 -0700 Subject: drm/vmwgfx: Check pin count before attempting to move a buffer In certain scenarios, e.g. when fbdev is enabled, we can get into a situation where a vmw_framebuffer_pin() is called on a buffer that is already pinned. When this happens, ttm_bo_validate() will unintentially remove the TTM_PL_FLAG_NO_EVICT flag, thus unpinning it, and leaving no way to actually pin the buffer again. To prevent this, if a buffer is already pinned, then instead of calling ttm_bo_validate(), just make sure the proposed placement is compatible with the existing placement. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: --- This is the 2nd patch in a 3-patch series to fix a console black screen issue on Ubuntu 16.04 server. This fixes a BUG_ON() condition where a pinned buffer gets accidentally put onto the LRU list. diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c index 9b078a4..0cd8890 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c @@ -49,6 +49,7 @@ int vmw_dmabuf_pin_in_placement(struct vmw_private *dev_priv, { struct ttm_buffer_object *bo = &buf->base; int ret; + uint32_t new_flags; ret = ttm_write_lock(&dev_priv->reservation_sem, interruptible); if (unlikely(ret != 0)) @@ -60,7 +61,12 @@ int vmw_dmabuf_pin_in_placement(struct vmw_private *dev_priv, if (unlikely(ret != 0)) goto err; - ret = ttm_bo_validate(bo, placement, interruptible, false); + if (buf->pin_count > 0) + ret = ttm_bo_mem_compat(placement, &bo->mem, + &new_flags) == true ? 0 : -EINVAL; + else + ret = ttm_bo_validate(bo, placement, interruptible, false); + if (!ret) vmw_bo_pin_reserved(buf, true); @@ -91,6 +97,7 @@ int vmw_dmabuf_pin_in_vram_or_gmr(struct vmw_private *dev_priv, { struct ttm_buffer_object *bo = &buf->base; int ret; + uint32_t new_flags; ret = ttm_write_lock(&dev_priv->reservation_sem, interruptible); if (unlikely(ret != 0)) @@ -102,6 +109,12 @@ int vmw_dmabuf_pin_in_vram_or_gmr(struct vmw_private *dev_priv, if (unlikely(ret != 0)) goto err; + if (buf->pin_count > 0) { + ret = ttm_bo_mem_compat(&vmw_vram_gmr_placement, &bo->mem, + &new_flags) == true ? 0 : -EINVAL; + goto out_unreserve; + } + ret = ttm_bo_validate(bo, &vmw_vram_gmr_placement, interruptible, false); if (likely(ret == 0) || ret == -ERESTARTSYS) @@ -161,6 +174,7 @@ int vmw_dmabuf_pin_in_start_of_vram(struct vmw_private *dev_priv, struct ttm_placement placement; struct ttm_place place; int ret = 0; + uint32_t new_flags; place = vmw_vram_placement.placement[0]; place.lpfn = bo->num_pages; @@ -185,10 +199,15 @@ int vmw_dmabuf_pin_in_start_of_vram(struct vmw_private *dev_priv, */ if (bo->mem.mem_type == TTM_PL_VRAM && bo->mem.start < bo->num_pages && - bo->mem.start > 0) + bo->mem.start > 0 && + buf->pin_count == 0) (void) ttm_bo_validate(bo, &vmw_sys_placement, false, false); - ret = ttm_bo_validate(bo, &placement, interruptible, false); + if (buf->pin_count > 0) + ret = ttm_bo_mem_compat(&placement, &bo->mem, + &new_flags) == true ? 0 : -EINVAL; + else + ret = ttm_bo_validate(bo, &placement, interruptible, false); /* For some reason we didn't end up at the start of vram */ WARN_ON(ret == 0 && bo->offset != 0); -- cgit v0.10.2 From d5f1a291e32309324a8c481ed84b5c118d1360ea Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 29 Jun 2016 13:23:18 -0700 Subject: drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set For the Screen Object display unit, we need to reserve a guest-invisible region equal to the size of the framebuffer for the host. This region can only be reserved in VRAM, whereas the guest-visible framebuffer can be reserved in either VRAM or GMR. As such priority should be given to the guest-invisible region otherwise in a limited VRAM situation, we can fail to allocate this region. This patch makes it so that vmw_sou_backing_alloc() is called before the framebuffer is pinned. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Cc: --- This is the last patch of a 3-patch series to fix console black screen issue on Ubuntu 16.04 server diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 679a4cb..66eaa30 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -517,28 +517,6 @@ static int vmw_fb_kms_framebuffer(struct fb_info *info) par->set_fb = &vfb->base; - if (!par->bo_ptr) { - /* - * Pin before mapping. Since we don't know in what placement - * to pin, call into KMS to do it for us. - */ - ret = vfb->pin(vfb); - if (ret) { - DRM_ERROR("Could not pin the fbdev framebuffer.\n"); - return ret; - } - - ret = ttm_bo_kmap(&par->vmw_bo->base, 0, - par->vmw_bo->base.num_pages, &par->map); - if (ret) { - vfb->unpin(vfb); - DRM_ERROR("Could not map the fbdev framebuffer.\n"); - return ret; - } - - par->bo_ptr = ttm_kmap_obj_virtual(&par->map, &par->bo_iowrite); - } - return 0; } @@ -601,6 +579,31 @@ static int vmw_fb_set_par(struct fb_info *info) if (ret) goto out_unlock; + if (!par->bo_ptr) { + struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(set.fb); + + /* + * Pin before mapping. Since we don't know in what placement + * to pin, call into KMS to do it for us. + */ + ret = vfb->pin(vfb); + if (ret) { + DRM_ERROR("Could not pin the fbdev framebuffer.\n"); + return ret; + } + + ret = ttm_bo_kmap(&par->vmw_bo->base, 0, + par->vmw_bo->base.num_pages, &par->map); + if (ret) { + vfb->unpin(vfb); + DRM_ERROR("Could not map the fbdev framebuffer.\n"); + return ret; + } + + par->bo_ptr = ttm_kmap_obj_virtual(&par->map, &par->bo_iowrite); + } + + vmw_fb_dirty_mark(par, par->fb_x, par->fb_y, par->set_fb->width, par->set_fb->height); -- cgit v0.10.2 From beca4cf55323147ca9c8a98de1871be6e4fe8f34 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 29 Jun 2016 13:37:35 -0700 Subject: drm/vmwgfx: Fix corner case screen target management When the surface backing a framebuffer doesn't match the framebuffer's dimensions, the screen target code would test the framebuffer dimensions rather than the surface dimensions when deciding whether to bind the surface as a screen target directly. This causes a screen target - surface dimension mismatch and a subsequent device error. Fix this by testing against the surface dimension. v2: Fix review comments by Sinclair Yeh. Signed-off-by: Thomas Hellstrom Reviewed-by: Sinclair Yeh Cc: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 9ca818f..41932a7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -399,8 +399,10 @@ static int vmw_stdu_bind_fb(struct vmw_private *dev_priv, WARN_ON_ONCE(!stdu->defined); - if (!vfb->dmabuf && new_fb->width == mode->hdisplay && - new_fb->height == mode->vdisplay) + new_vfbs = (vfb->dmabuf) ? NULL : vmw_framebuffer_to_vfbs(new_fb); + + if (new_vfbs && new_vfbs->surface->base_size.width == mode->hdisplay && + new_vfbs->surface->base_size.height == mode->vdisplay) new_content_type = SAME_AS_DISPLAY; else if (vfb->dmabuf) new_content_type = SEPARATE_DMA; @@ -444,7 +446,6 @@ static int vmw_stdu_bind_fb(struct vmw_private *dev_priv, content_srf.mip_levels[0] = 1; content_srf.multisample_count = 0; } else { - new_vfbs = vmw_framebuffer_to_vfbs(new_fb); content_srf = *new_vfbs->surface; } @@ -464,7 +465,6 @@ static int vmw_stdu_bind_fb(struct vmw_private *dev_priv, return ret; } } else if (new_content_type == SAME_AS_DISPLAY) { - new_vfbs = vmw_framebuffer_to_vfbs(new_fb); new_display_srf = vmw_surface_reference(new_vfbs->surface); } -- cgit v0.10.2 From eb70db8756717b90c01ccc765fdefc4dd969fc74 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 1 Jul 2016 16:07:50 -0400 Subject: packet: Use symmetric hash for PACKET_FANOUT_HASH. People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by: Eric Leblond Tested-by: Eric Leblond Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index ee38a41..24859d4 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1062,6 +1062,7 @@ __skb_set_sw_hash(struct sk_buff *skb, __u32 hash, bool is_l4) } void __skb_get_hash(struct sk_buff *skb); +u32 __skb_get_hash_symmetric(struct sk_buff *skb); u32 skb_get_poff(const struct sk_buff *skb); u32 __skb_get_poff(const struct sk_buff *skb, void *data, const struct flow_keys *keys, int hlen); diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index a669dea..61ad43f 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -651,6 +651,23 @@ void make_flow_keys_digest(struct flow_keys_digest *digest, } EXPORT_SYMBOL(make_flow_keys_digest); +static struct flow_dissector flow_keys_dissector_symmetric __read_mostly; + +u32 __skb_get_hash_symmetric(struct sk_buff *skb) +{ + struct flow_keys keys; + + __flow_hash_secret_init(); + + memset(&keys, 0, sizeof(keys)); + __skb_flow_dissect(skb, &flow_keys_dissector_symmetric, &keys, + NULL, 0, 0, 0, + FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL); + + return __flow_hash_from_keys(&keys, hashrnd); +} +EXPORT_SYMBOL_GPL(__skb_get_hash_symmetric); + /** * __skb_get_hash: calculate a flow hash * @skb: sk_buff to calculate flow hash from @@ -868,6 +885,29 @@ static const struct flow_dissector_key flow_keys_dissector_keys[] = { }, }; +static const struct flow_dissector_key flow_keys_dissector_symmetric_keys[] = { + { + .key_id = FLOW_DISSECTOR_KEY_CONTROL, + .offset = offsetof(struct flow_keys, control), + }, + { + .key_id = FLOW_DISSECTOR_KEY_BASIC, + .offset = offsetof(struct flow_keys, basic), + }, + { + .key_id = FLOW_DISSECTOR_KEY_IPV4_ADDRS, + .offset = offsetof(struct flow_keys, addrs.v4addrs), + }, + { + .key_id = FLOW_DISSECTOR_KEY_IPV6_ADDRS, + .offset = offsetof(struct flow_keys, addrs.v6addrs), + }, + { + .key_id = FLOW_DISSECTOR_KEY_PORTS, + .offset = offsetof(struct flow_keys, ports), + }, +}; + static const struct flow_dissector_key flow_keys_buf_dissector_keys[] = { { .key_id = FLOW_DISSECTOR_KEY_CONTROL, @@ -889,6 +929,9 @@ static int __init init_default_flow_dissectors(void) skb_flow_dissector_init(&flow_keys_dissector, flow_keys_dissector_keys, ARRAY_SIZE(flow_keys_dissector_keys)); + skb_flow_dissector_init(&flow_keys_dissector_symmetric, + flow_keys_dissector_symmetric_keys, + ARRAY_SIZE(flow_keys_dissector_symmetric_keys)); skb_flow_dissector_init(&flow_keys_buf_dissector, flow_keys_buf_dissector_keys, ARRAY_SIZE(flow_keys_buf_dissector_keys)); diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 9bff6ef..9f0983f 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1341,7 +1341,7 @@ static unsigned int fanout_demux_hash(struct packet_fanout *f, struct sk_buff *skb, unsigned int num) { - return reciprocal_scale(skb_get_hash(skb), num); + return reciprocal_scale(__skb_get_hash_symmetric(skb), num); } static unsigned int fanout_demux_lb(struct packet_fanout *f, -- cgit v0.10.2 From 82a31b9231f02d9c1b7b290a46999d517b0d312a Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 30 Jun 2016 10:15:22 -0700 Subject: net_sched: fix mirrored packets checksum Similar to commit 9b368814b336 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim Cc: Tom Herbert Signed-off-by: Cong Wang Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 24859d4..f39b371 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2871,6 +2871,25 @@ static inline void skb_postpush_rcsum(struct sk_buff *skb, } /** + * skb_push_rcsum - push skb and update receive checksum + * @skb: buffer to update + * @len: length of data pulled + * + * This function performs an skb_push on the packet and updates + * the CHECKSUM_COMPLETE checksum. It should be used on + * receive path processing instead of skb_push unless you know + * that the checksum difference is zero (e.g., a valid IP header) + * or you are setting ip_summed to CHECKSUM_NONE. + */ +static inline unsigned char *skb_push_rcsum(struct sk_buff *skb, + unsigned int len) +{ + skb_push(skb, len); + skb_postpush_rcsum(skb, skb->data, len); + return skb->data; +} + +/** * pskb_trim_rcsum - trim received skb and update checksum * @skb: buffer to trim * @len: new length diff --git a/net/core/skbuff.c b/net/core/skbuff.c index f2b77e5..eb12d21 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3016,24 +3016,6 @@ int skb_append_pagefrags(struct sk_buff *skb, struct page *page, EXPORT_SYMBOL_GPL(skb_append_pagefrags); /** - * skb_push_rcsum - push skb and update receive checksum - * @skb: buffer to update - * @len: length of data pulled - * - * This function performs an skb_push on the packet and updates - * the CHECKSUM_COMPLETE checksum. It should be used on - * receive path processing instead of skb_push unless you know - * that the checksum difference is zero (e.g., a valid IP header) - * or you are setting ip_summed to CHECKSUM_NONE. - */ -static unsigned char *skb_push_rcsum(struct sk_buff *skb, unsigned len) -{ - skb_push(skb, len); - skb_postpush_rcsum(skb, skb->data, len); - return skb->data; -} - -/** * skb_pull_rcsum - pull skb and update receive checksum * @skb: buffer to update * @len: length of data pulled diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 128942b..1f5bd6c 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -181,7 +181,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, if (!(at & AT_EGRESS)) { if (m->tcfm_ok_push) - skb_push(skb2, skb->mac_len); + skb_push_rcsum(skb2, skb->mac_len); } /* mirror is always swallowed */ -- cgit v0.10.2 From 79c62220d74a4a3f961a2cb7320da09eebf5daf7 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 1 Jul 2016 00:00:54 +0200 Subject: macsec: set actual real device for xmit when !protect_frames Avoid recursions of dev_queue_xmit() to the wrong net device when frames are unprotected, since at that time skb->dev still points to our own macsec dev and unlike macsec_encrypt_finish() dev pointer doesn't get updated to real underlying device. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Daniel Borkmann Acked-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 0e7eff7..8bcd78f 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2640,6 +2640,7 @@ static netdev_tx_t macsec_start_xmit(struct sk_buff *skb, u64_stats_update_begin(&secy_stats->syncp); secy_stats->stats.OutPktsUntagged++; u64_stats_update_end(&secy_stats->syncp); + skb->dev = macsec->real_dev; len = skb->len; ret = dev_queue_xmit(skb); count_tx(dev, ret, len); -- cgit v0.10.2 From 016eb55157166132b094e53434748cae35e18455 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 30 Jun 2016 13:27:20 -0700 Subject: net: bcmsysport: Device stats are unsigned long On 64bits kernels, device stats are 64bits wide, not 32bits. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 543bf38..bfa26a2 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -392,7 +392,7 @@ static void bcm_sysport_get_stats(struct net_device *dev, else p = (char *)priv; p += s->stat_offset; - data[i] = *(u32 *)p; + data[i] = *(unsigned long *)p; } } -- cgit v0.10.2 From 55e77a3e8297581c919b45adcc4d0815b69afa84 Mon Sep 17 00:00:00 2001 From: Richard Alpe Date: Fri, 1 Jul 2016 11:11:21 +0200 Subject: tipc: fix nl compat regression for link statistics Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes of the link name where left out. Making the output of tipc-config -ls look something like: Link statistics: dcast-link 1:data0-1.1.2:data0 1:data0-1.1.3:data0 Also, for the record, the patch that introduce this regression claims "Sending the whole object out can cause a leak". Which isn't very likely as this is a compat layer, where the data we are parsing is generated by us and we know the string to be NULL terminated. But you can of course never be to secure. Fixes: 5d2be1422e02 (tipc: fix an infoleak in tipc_nl_compat_link_dump) Signed-off-by: Richard Alpe Signed-off-by: David S. Miller diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index 3ad9fab..1fd4647 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -604,7 +604,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg, link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]); link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP])); - nla_strlcpy(link_info.str, nla_data(link[TIPC_NLA_LINK_NAME]), + nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME], TIPC_MAX_LINK_NAME); return tipc_add_tlv(msg->rep, TIPC_TLV_LINK_INFO, -- cgit v0.10.2 From 4a6e68bf96c1fa293717d2f00a68a68c92fa4150 Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:35 -0400 Subject: ACPI,PCI,IRQ: factor in PCI possible The change introduced in commit 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) omitted the initially applied PCI_POSSIBLE penalty when the IRQ is active. Incorrect calculation of the penalty leads the ACPI code to assigning a wrong interrupt number to a PCI INTx interrupt. This would not be as bad as it sounds in theory. It would just cause the interrupts to be shared and result in performance penalty. However, some drivers (like the parallel port driver) don't like interrupt sharing and in the above case they will causes all of the PCI drivers wanting to share the interrupt to be unable to request it. The issue has not been caught in testing because the behavior is platform-specific and depends on the peripherals ending up sharing the IRQ and their drivers. Before the above commit the code would add the PCI_POSSIBLE value divided by the number of possible IRQ users to the IRQ penalty during initialization. Later in that code path, if the IRQ is chosen as the active IRQ or if it is used by ISA; additional penalties are added. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya Tested-by: Wim Osterholt [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 4ed4061..db7be62 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -470,6 +470,7 @@ static int acpi_irq_pci_sharing_penalty(int irq) { struct acpi_pci_link *link; int penalty = 0; + int i; list_for_each_entry(link, &acpi_link_list, list) { /* @@ -478,18 +479,14 @@ static int acpi_irq_pci_sharing_penalty(int irq) */ if (link->irq.active && link->irq.active == irq) penalty += PIRQ_PENALTY_PCI_USING; - else { - int i; - - /* - * If a link is inactive, penalize the IRQs it - * might use, but not as severely. - */ - for (i = 0; i < link->irq.possible_count; i++) - if (link->irq.possible[i] == irq) - penalty += PIRQ_PENALTY_PCI_POSSIBLE / - link->irq.possible_count; - } + + /* + * penalize the IRQs PCI might use, but not as severely. + */ + for (i = 0; i < link->irq.possible_count; i++) + if (link->irq.possible[i] == irq) + penalty += PIRQ_PENALTY_PCI_POSSIBLE / + link->irq.possible_count; } return penalty; -- cgit v0.10.2 From 487cf917ed0d12afaf403d9d77684bf44b8c13be Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:36 -0400 Subject: Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()" Trying to make the ISA and PCI init functionality common turned out to be a bad idea, because the ISA path depends on external functionality. Restore the previous behavior and limit the refactoring to PCI interrupts only. Fixes: 1fcb6a813c4f "ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()" Signed-off-by: Sinan Kaya Tested-by: Wim Osterholt Signed-off-by: Rafael J. Wysocki diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index b2a4e2a..3cd6983 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -396,6 +396,7 @@ int __init pci_acpi_init(void) return -ENODEV; printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); + acpi_irq_penalty_init(); pcibios_enable_irq = acpi_pci_irq_enable; pcibios_disable_irq = acpi_pci_irq_disable; x86_init.pci.init_irq = x86_init_noop; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index db7be62..606083b 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -517,6 +517,42 @@ static int acpi_irq_get_penalty(int irq) return penalty; } +int __init acpi_irq_penalty_init(void) +{ + struct acpi_pci_link *link; + int i; + + /* + * Update penalties to facilitate IRQ balancing. + */ + list_for_each_entry(link, &acpi_link_list, list) { + + /* + * reflect the possible and active irqs in the penalty table -- + * useful for breaking ties. + */ + if (link->irq.possible_count) { + int penalty = + PIRQ_PENALTY_PCI_POSSIBLE / + link->irq.possible_count; + + for (i = 0; i < link->irq.possible_count; i++) { + if (link->irq.possible[i] < ACPI_MAX_ISA_IRQS) + acpi_isa_irq_penalty[link->irq. + possible[i]] += + penalty; + } + + } else if (link->irq.active && + (link->irq.active < ACPI_MAX_ISA_IRQS)) { + acpi_isa_irq_penalty[link->irq.active] += + PIRQ_PENALTY_PCI_POSSIBLE; + } + } + + return 0; +} + static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 797ae2e..29c6912 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -78,6 +78,7 @@ /* ACPI PCI Interrupt Link (pci_link.c) */ +int acpi_irq_penalty_init(void); int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering, int *polarity, char **name); int acpi_pci_link_free_irq(acpi_handle handle); -- cgit v0.10.2 From f7eca374f000bd8bd6aacc2619475fdba0b7ecca Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Wed, 29 Jun 2016 04:27:37 -0400 Subject: ACPI,PCI,IRQ: separate ISA penalty calculation Since commit 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) the penalty values are calculated on the fly rather than at boot time. This works fine for PCI interrupts but not so well for ISA interrupts. The information on whether or not an ISA interrupt is in use is not available to the pci_link.c code directly. That information is obtained from the outside via acpi_penalize_isa_irq(). [If its "active" argument is true, then the IRQ is in use by ISA.] Since the current code relies on PCI Link objects for determination of penalties, we are factoring in the PCI penalty twice after acpi_penalize_isa_irq() function is called. To avoid that, limit the newly added functionality to just PCI interrupts so that old behavior is still maintained. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya Tested-by: Wim Osterholt Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 606083b..c983bf7 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -496,9 +496,6 @@ static int acpi_irq_get_penalty(int irq) { int penalty = 0; - if (irq < ACPI_MAX_ISA_IRQS) - penalty += acpi_isa_irq_penalty[irq]; - /* * Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict * with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be @@ -513,6 +510,9 @@ static int acpi_irq_get_penalty(int irq) penalty += PIRQ_PENALTY_PCI_USING; } + if (irq < ACPI_MAX_ISA_IRQS) + return penalty + acpi_isa_irq_penalty[irq]; + penalty += acpi_irq_pci_sharing_penalty(irq); return penalty; } -- cgit v0.10.2 From 6d037de90a1fd7b4879b48d4dd5c4839b271be98 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 1 Jul 2016 15:01:01 +0200 Subject: MIPS: Fix possible corruption of cache mode by mprotect. The following testcase may result in a page table entries with a invalid CCA field being generated: static void *bindstack; static int sysrqfd; static void protect_low(int protect) { mprotect(bindstack, BINDSTACK_SIZE, protect); } static void sigbus_handler(int signal, siginfo_t * info, void *context) { void *addr = info->si_addr; write(sysrqfd, "x", 1); printf("sigbus, fault address %p (should not happen, but might)\n", addr); abort(); } static void run_bind_test(void) { unsigned int *p = bindstack; p[0] = 0xf001f001; write(sysrqfd, "x", 1); /* Set trap on access to p[0] */ protect_low(PROT_NONE); write(sysrqfd, "x", 1); /* Clear trap on access to p[0] */ protect_low(PROT_READ | PROT_WRITE | PROT_EXEC); write(sysrqfd, "x", 1); /* Check the contents of p[0] */ if (p[0] != 0xf001f001) { write(sysrqfd, "x", 1); /* Reached, but shouldn't be */ printf("badness, shouldn't happen but does\n"); abort(); } } int main(void) { struct sigaction sa; sysrqfd = open("/proc/sysrq-trigger", O_WRONLY); if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) { perror("sigprocmask"); return 0; } sa.sa_sigaction = sigbus_handler; sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART; if (sigaction(SIGBUS, &sa, NULL)) { perror("sigaction"); return 0; } bindstack = mmap(NULL, BINDSTACK_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (bindstack == MAP_FAILED) { perror("mmap bindstack"); return 0; } printf("bindstack: %p\n", bindstack); run_bind_test(); printf("done\n"); return 0; } There are multiple ingredients for this: 1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3 on all platforms except SB1 where it's CCA 5. 2) _page_cachable_default must have bits set which are not set _CACHE_CACHABLE_NONCOHERENT. 3) Either the defective version of pte_modify for XPA or the standard version must be in used. However pte_modify for the 36 bit address space support is no affected. In that case additional bits in the final CCA mode may generate an invalid value for the CCA field. On the R10000 system where this was tracked down for example a CCA 7 has been observed, which is Uncached Accelerated. Fixed by: 1) Using the proper CCA mode for PAGE_NONE just like for all the other PAGE_* pte/pmd bits. 2) Fix the two affected variants of pte_modify. Further code inspection also shows the same issue to exist in pmd_modify which would affect huge page systems. Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE and pmd_modify issue found by me. The history of this goes back beyond Linus' git history. Chris Dearman's commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 ("[MIPS] Allow setting of the cache attribute at run time.") missed the opportunity to fix this but it was originally introduced in lmo commit d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.") and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option CONFIG_MIPS_UNCACHED.") Signed-off-by: Ralf Baechle Reported-by: Alastair Bridgewater diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index a6b611f..f538167 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -24,7 +24,7 @@ struct mm_struct; struct vm_area_struct; #define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_NO_READ | \ - _CACHE_CACHABLE_NONCOHERENT) + _page_cachable_default) #define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_WRITE | \ _page_cachable_default) #define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_NO_EXEC | \ @@ -476,7 +476,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) pte.pte_low &= (_PAGE_MODIFIED | _PAGE_ACCESSED | _PFNX_MASK); pte.pte_high &= (_PFN_MASK | _CACHE_MASK); pte.pte_low |= pgprot_val(newprot) & ~_PFNX_MASK; - pte.pte_high |= pgprot_val(newprot) & ~_PFN_MASK; + pte.pte_high |= pgprot_val(newprot) & ~(_PFN_MASK | _CACHE_MASK); return pte; } #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) @@ -491,7 +491,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #else static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | + (pgprot_val(newprot) & ~_PAGE_CHG_MASK)); } #endif @@ -632,7 +633,8 @@ static inline struct page *pmd_page(pmd_t pmd) static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { - pmd_val(pmd) = (pmd_val(pmd) & _PAGE_CHG_MASK) | pgprot_val(newprot); + pmd_val(pmd) = (pmd_val(pmd) & _PAGE_CHG_MASK) | + (pgprot_val(newprot) & ~_PAGE_CHG_MASK); return pmd; } -- cgit v0.10.2 From a8b7d7709dc6db7d6d8a9a04aa9d49b029a27203 Mon Sep 17 00:00:00 2001 From: Matt Corallo Date: Thu, 30 Jun 2016 19:46:16 +0000 Subject: net: stmmac: Fix null-function call in ISR on stmmac1000 (resent due to overhelpful mail client corrupting patch) At least on Meson GXBB, the CORE_IRQ_MTL_RX_OVERFLOW interrupt is thrown with the stmmac1000 driver, which does not support set_rx_tail_ptr. With this patch and the clock fixes, 1G ethernet works on ODROID-C2. Signed-off-by: Matt Corallo Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a473c18..e407126 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2804,7 +2804,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) priv->tx_path_in_lpi_mode = true; if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE) priv->tx_path_in_lpi_mode = false; - if (status & CORE_IRQ_MTL_RX_OVERFLOW) + if (status & CORE_IRQ_MTL_RX_OVERFLOW && priv->hw->dma->set_rx_tail_ptr) priv->hw->dma->set_rx_tail_ptr(priv->ioaddr, priv->rx_tail_addr, STMMAC_CHAN0); -- cgit v0.10.2 From 373819ec391de0d11f63b10b2fb69ef2854236ca Mon Sep 17 00:00:00 2001 From: Sergio Valverde Date: Fri, 1 Jul 2016 11:44:30 -0600 Subject: enc28j60: Fix race condition in enc28j60 driver The interrupt worker code for the enc28j60 relies only on the TXIF flag to determinate if the packet transmission was completed. However the datasheet specifies in section 12.1.3 that TXERIF will clear the TXRTS after a transmit abort. Also in section 12.1.4 that TXIF will be set when TXRTS transitions from '1' to '0'. Therefore the TXIF flag is enabled during transmission errors. This causes a race condition, since the worker code will invoke enc28j60_tx_clear() -> netif_wake_queue(), potentially invoking the ndo_start_xmit function to send a new packet. The enc28j60_send_packet function uses a workqueue that invokes enc28j60_hw_tx(). In between this function is called, the worker from the interrupt handler will enter the path for error handler because of the TXERIF flag, causing to invoke enc28j60_tx_clear() again and releasing the packet scheduled for transmission, causing a kernel crash with due a NULL pointer. These crashes due a NULL pointer were observed under stress conditions of the device. A BUG_ON() sequence was used to validate the issue was fixed, and has been running without problems for 2 years now. Signed-off-by: Diego Dompe Acked-by: Sergio Valverde Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/microchip/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c index 7066954..0a26b11 100644 --- a/drivers/net/ethernet/microchip/enc28j60.c +++ b/drivers/net/ethernet/microchip/enc28j60.c @@ -1151,7 +1151,8 @@ static void enc28j60_irq_work_handler(struct work_struct *work) enc28j60_phy_read(priv, PHIR); } /* TX complete handler */ - if ((intflags & EIR_TXIF) != 0) { + if (((intflags & EIR_TXIF) != 0) && + ((intflags & EIR_TXERIF) == 0)) { bool err = false; loop++; if (netif_msg_intr(priv)) @@ -1203,7 +1204,7 @@ static void enc28j60_irq_work_handler(struct work_struct *work) enc28j60_tx_clear(ndev, true); } else enc28j60_tx_clear(ndev, true); - locked_reg_bfclr(priv, EIR, EIR_TXERIF); + locked_reg_bfclr(priv, EIR, EIR_TXERIF | EIR_TXIF); } /* RX Error handler */ if ((intflags & EIR_RXERIF) != 0) { @@ -1238,6 +1239,8 @@ static void enc28j60_irq_work_handler(struct work_struct *work) */ static void enc28j60_hw_tx(struct enc28j60_net *priv) { + BUG_ON(!priv->tx_skb); + if (netif_msg_tx_queued(priv)) printk(KERN_DEBUG DRV_NAME ": Tx Packet Len:%d\n", priv->tx_skb->len); -- cgit v0.10.2 From b291c418172f2cfbe009d81cd9a92f7a2de7c579 Mon Sep 17 00:00:00 2001 From: Stefan Hauser Date: Fri, 1 Jul 2016 22:35:03 +0200 Subject: net: phy: dp83867: Fix initialization of PHYCR register When initializing the PHY control register, the FIFO depth bits are written without reading the previous register value, i.e. all other bits are overwritten with zero. This disables automatic MDI-X configuration, which is enabled by default. Fix initialization by doing a read/modify/write operation. Signed-off-by: Stefan Hauser Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 2afa61b..91177a4 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -57,6 +57,7 @@ /* PHY CTRL bits */ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 +#define DP83867_PHYCR_FIFO_DEPTH_MASK (3 << 14) /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 @@ -133,8 +134,8 @@ static int dp83867_of_init(struct phy_device *phydev) static int dp83867_config_init(struct phy_device *phydev) { struct dp83867_private *dp83867; - int ret; - u16 val, delay; + int ret, val; + u16 delay; if (!phydev->priv) { dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867), @@ -151,8 +152,12 @@ static int dp83867_config_init(struct phy_device *phydev) } if (phy_interface_is_rgmii(phydev)) { - ret = phy_write(phydev, MII_DP83867_PHYCTRL, - (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); + val = phy_read(phydev, MII_DP83867_PHYCTRL); + if (val < 0) + return val; + val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK; + val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT); + ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; } -- cgit v0.10.2 From e7c0b5991dd1be7b6f6dc2b54a15a0f47b64b007 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 1 Jul 2016 10:02:44 -0400 Subject: ovl: warn instead of error if d_type is not supported overlay needs underlying fs to support d_type. Recently I put in a patch in to detect this condition and started failing mount if underlying fs did not support d_type. But this breaks existing configurations over kernel upgrade. Those who are running docker (partially broken configuration) with xfs not supporting d_type, are surprised that after kernel upgrade docker does not run anymore. https://github.com/docker/docker/issues/22937#issuecomment-229881315 So instead of erroring out, detect broken configuration and warn about it. This should allow existing docker setups to continue working after kernel upgrade. Signed-off-by: Vivek Goyal Signed-off-by: Miklos Szeredi Fixes: 45aebeaf4f67 ("ovl: Ensure upper filesystem supports d_type") Cc: 4.6 diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index ce02f46..9a7693d 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1082,11 +1082,13 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent) if (err < 0) goto out_put_workdir; - if (!err) { - pr_err("overlayfs: upper fs needs to support d_type.\n"); - err = -EINVAL; - goto out_put_workdir; - } + /* + * We allowed this configuration and don't want to + * break users over kernel upgrade. So warn instead + * of erroring out. + */ + if (!err) + pr_warn("overlayfs: upper fs needs to support d_type.\n"); } } -- cgit v0.10.2 From 9010ae4a8dee29e5886e86682799dde0eee7f447 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 1 Jul 2016 15:22:22 -0700 Subject: perf/x86/intel: Update event constraints when HT is off This patch updates the event constraints for non-PEBS mode for Intel Broadwell and Skylake processors. When HT is off, each CPU gets 8 generic counters. However, not all events can be programmed on any of the 8 counters. This patch adds the constraints for the MEM_* events which can only be measured on the bottom 4 counters. The constraints are also valid when HT is off because, then, there are only 4 generic counters and they are the bottom counters. Signed-off-by: Stephane Eranian Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Vince Weaver Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1467411742-13245-1-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 7c66695..9b4f9d3 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -115,6 +115,10 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly = INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_DISPATCH */ INTEL_UEVENT_CONSTRAINT(0x02a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */ + /* + * When HT is off these events can only run on the bottom 4 counters + * When HT is on, they are impacted by the HT bug and require EXCL access + */ INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ @@ -139,6 +143,10 @@ static struct event_constraint intel_ivb_event_constraints[] __read_mostly = INTEL_UEVENT_CONSTRAINT(0x0ca3, 0x4), /* CYCLE_ACTIVITY.STALLS_L1D_PENDING */ INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */ + /* + * When HT is off these events can only run on the bottom 4 counters + * When HT is on, they are impacted by the HT bug and require EXCL access + */ INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ @@ -182,6 +190,16 @@ struct event_constraint intel_skl_event_constraints[] = { FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_UEVENT_CONSTRAINT(0x1c0, 0x2), /* INST_RETIRED.PREC_DIST */ + + /* + * when HT is off, these can only run on the bottom 4 counters + */ + INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_INST_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_L3_HIT_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xcd, 0xf), /* MEM_TRANS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xc6, 0xf), /* FRONTEND_RETIRED.* */ + EVENT_CONSTRAINT_END }; @@ -250,6 +268,10 @@ static struct event_constraint intel_hsw_event_constraints[] = { /* CYCLE_ACTIVITY.CYCLES_NO_EXECUTE */ INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), + /* + * When HT is off these events can only run on the bottom 4 counters + * When HT is on, they are impacted by the HT bug and require EXCL access + */ INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ @@ -264,6 +286,13 @@ struct event_constraint intel_bdw_event_constraints[] = { FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */ INTEL_UEVENT_CONSTRAINT(0x148, 0x4), /* L1D_PEND_MISS.PENDING */ INTEL_UBIT_EVENT_CONSTRAINT(0x8a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_MISS */ + /* + * when HT is off, these can only run on the bottom 4 counters + */ + INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_INST_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_L3_HIT_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xcd, 0xf), /* MEM_TRANS_RETIRED.* */ EVENT_CONSTRAINT_END }; -- cgit v0.10.2 From fc18822510721fe694d273c5211c71ea52796d76 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Fri, 1 Jul 2016 23:02:05 -0500 Subject: perf/x86: Fix 32-bit perf user callgraph collection A basic perf callgraph record operation causes an immediate panic on a 32-bit kernel compiled with CONFIG_CC_STACKPROTECTOR=y: $ perf record -g ls Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd CPU: 0 PID: 998 Comm: ls Not tainted 4.7.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 c0dd5967 ff7afe1c 00000086 f41dbc2c c07445a0 464c457f f41dbca8 f41dbc44 c05646f4 f41dbca8 464c457f f41dbca8 464c457f f41dbc54 c04625be c0ce56fc c0404fbd f41dbc88 c0404fbd b74668f0 f41dc000 00000000 c0000000 00000000 Call Trace: [] dump_stack+0x58/0x78 [] panic+0x8e/0x1c6 [] __stack_chk_fail+0x1e/0x30 [] ? perf_callchain_user+0x22d/0x230 [] perf_callchain_user+0x22d/0x230 [] get_perf_callchain+0x1ff/0x270 [] perf_callchain+0x78/0x90 [] perf_prepare_sample+0x24b/0x370 [] perf_event_output_forward+0x24/0x70 [] __perf_event_overflow+0xa0/0x210 [] ? cpu_clock_event_read+0x43/0x50 [] perf_swevent_hrtimer+0x101/0x180 [] ? kmap_atomic_prot+0x35/0x140 [] ? get_page_from_freelist+0x279/0x950 [] ? vma_interval_tree_remove+0x158/0x230 [] ? wp_page_copy.isra.82+0x2f4/0x630 [] ? page_add_file_rmap+0x1d/0x50 [] ? unlock_page+0x61/0x80 [] ? filemap_map_pages+0x305/0x320 [] ? handle_mm_fault+0xb7f/0x1560 [] ? timerqueue_del+0x1b/0x70 [] ? __remove_hrtimer+0x2e/0x60 [] __hrtimer_run_queues+0xcb/0x2a0 [] ? __perf_event_overflow+0x210/0x210 [] hrtimer_interrupt+0x8a/0x180 [] local_apic_timer_interrupt+0x32/0x60 [] smp_apic_timer_interrupt+0x33/0x50 [] apic_timer_interrupt+0x34/0x3c Kernel Offset: disabled ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd The panic is caused by the fact that perf_callchain_user() mistakenly assumes it's 64-bit only and ends up corrupting the stack. Signed-off-by: Josh Poimboeuf Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: stable@vger.kernel.org # v4.5+ Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") Link: http://lkml.kernel.org/r/1a547f5077ec30f75f9b57074837c3c80df86e5e.1467432113.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 33787ee..26ced53 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2319,7 +2319,7 @@ void perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) { struct stack_frame frame; - const void __user *fp; + const unsigned long __user *fp; if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { /* TODO: We don't support guest os callchain now */ @@ -2332,7 +2332,7 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM)) return; - fp = (void __user *)regs->bp; + fp = (unsigned long __user *)regs->bp; perf_callchain_store(entry, regs->ip); @@ -2345,16 +2345,17 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs pagefault_disable(); while (entry->nr < entry->max_stack) { unsigned long bytes; + frame.next_frame = NULL; frame.return_address = 0; - if (!access_ok(VERIFY_READ, fp, 16)) + if (!access_ok(VERIFY_READ, fp, sizeof(*fp) * 2)) break; - bytes = __copy_from_user_nmi(&frame.next_frame, fp, 8); + bytes = __copy_from_user_nmi(&frame.next_frame, fp, sizeof(*fp)); if (bytes != 0) break; - bytes = __copy_from_user_nmi(&frame.return_address, fp+8, 8); + bytes = __copy_from_user_nmi(&frame.return_address, fp + 1, sizeof(*fp)); if (bytes != 0) break; -- cgit v0.10.2 From 86a8280a7fe007d61b05fa8a352edc0595283dad Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:57:20 +0200 Subject: m68k: Assorted spelling fixes - s/acccess/access/ - s/accoding/according/ - s/addad/added/ - s/addreess/address/ - s/allocatiom/allocation/ - s/Assember/Assembler/ - s/compactnes/compactness/ - s/conneced/connected/ - s/decending/descending/ - s/diectly/directly/ - s/diplacement/displacement/ Signed-off-by: Andrea Gelmini [geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S] Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S index fa31be2..73d92ea 100644 --- a/arch/m68k/coldfire/head.S +++ b/arch/m68k/coldfire/head.S @@ -288,7 +288,7 @@ _clear_bss: #endif /* - * Assember start up done, start code proper. + * Assembler start up done, start code proper. */ jsr start_kernel /* start Linux kernel */ diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c index c525e4c..9abb1a4 100644 --- a/arch/m68k/coldfire/m5272.c +++ b/arch/m68k/coldfire/m5272.c @@ -111,7 +111,7 @@ void __init config_BSP(char *commandp, int size) /***************************************************************************/ /* - * Some 5272 based boards have the FEC ethernet diectly connected to + * Some 5272 based boards have the FEC ethernet directly connected to * an ethernet switch. In this case we need to use the fixed phy type, * and we need to declare it early in boot. */ diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c index 821de92..6a640be 100644 --- a/arch/m68k/coldfire/pci.c +++ b/arch/m68k/coldfire/pci.c @@ -42,7 +42,7 @@ static unsigned long iospace; /* * We need to be carefull probing on bus 0 (directly connected to host - * bridge). We should only acccess the well defined possible devices in + * bridge). We should only access the well defined possible devices in * use, ignore aliases and the like. */ static unsigned char mcf_host_slot2sid[32] = { diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 78cb60f..9bbffeb 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -10191,7 +10191,7 @@ xdnrm_con: xdnrm_sd: mov.l %a1,-(%sp) tst.b LOCAL_EX(%a0) # is denorm pos or neg? - smi.b %d1 # set d0 accodingly + smi.b %d1 # set d0 accordingly bsr.l unf_sub mov.l (%sp)+,%a1 xdnrm_exit: @@ -10990,7 +10990,7 @@ src_qnan_m: # routines where an instruction is selected by an index into # a large jump table corresponding to a given instruction which # has been decoded. Flow continues here where we now decode -# further accoding to the source operand type. +# further according to the source operand type. # global fsinh @@ -23196,14 +23196,14 @@ m_sign: # # 1. Branch on the sign of the adjusted exponent. # 2p.(positive exp) -# 2. Check M16 and the digits in lwords 2 and 3 in decending order. +# 2. Check M16 and the digits in lwords 2 and 3 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Subtract the count from the exp. # 5. Check if the exp has crossed zero in #3 above; make the exp abs # and set SE. # 6. Multiply the mantissa by 10**count. # 2n.(negative exp) -# 2. Check the digits in lwords 3 and 2 in decending order. +# 2. Check the digits in lwords 3 and 2 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Add the count to the exp. # 5. Check if the exp has crossed zero in #3 above; clear SE. diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 4aedef9..3535e6c 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -13156,14 +13156,14 @@ m_sign: # # 1. Branch on the sign of the adjusted exponent. # 2p.(positive exp) -# 2. Check M16 and the digits in lwords 2 and 3 in decending order. +# 2. Check M16 and the digits in lwords 2 and 3 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Subtract the count from the exp. # 5. Check if the exp has crossed zero in #3 above; make the exp abs # and set SE. # 6. Multiply the mantissa by 10**count. # 2n.(negative exp) -# 2. Check the digits in lwords 3 and 2 in decending order. +# 2. Check the digits in lwords 3 and 2 in descending order. # 3. Add one for each zero encountered until a non-zero digit. # 4. Add the count to the exp. # 5. Check if the exp has crossed zero in #3 above; clear SE. diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index 429fe26..208b4da 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -18,7 +18,7 @@ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) * * APR/18/2002 : added proper support for MCF5272 DMA controller. diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h index f186459..699f20c 100644 --- a/arch/m68k/include/asm/m525xsim.h +++ b/arch/m68k/include/asm/m525xsim.h @@ -123,10 +123,10 @@ /* * I2C module. */ -#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */ +#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base address I2C0 */ #define MCFI2C_SIZE0 0x20 /* Register set size */ -#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */ +#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base address I2C1 */ #define MCFI2C_SIZE1 0x20 /* Register set size */ /* diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h index 26cc3d5..8824236 100644 --- a/arch/m68k/include/asm/mcfmmu.h +++ b/arch/m68k/include/asm/mcfmmu.h @@ -38,7 +38,7 @@ /* * MMU Operation register. */ -#define MMUOR_UAA 0x00000001 /* Update allocatiom address */ +#define MMUOR_UAA 0x00000001 /* Update allocation address */ #define MMUOR_ACC 0x00000002 /* TLB access */ #define MMUOR_RD 0x00000004 /* TLB access read */ #define MMUOR_WR 0x00000000 /* TLB access write */ diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h index fc5b362..c48d21b 100644 --- a/arch/m68k/include/asm/q40_master.h +++ b/arch/m68k/include/asm/q40_master.h @@ -1,6 +1,6 @@ /* * Q40 master Chip Control - * RTC stuff merged for compactnes.. + * RTC stuff merged for compactness. */ #ifndef _Q40_MASTER_H diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 4d2adfb..7990b6f 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -60,7 +60,7 @@ * * The host talks to the IOPs using a rather simple message-passing scheme via * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each - * channel is conneced to a specific software driver on the IOP. For example + * channel is connected to a specific software driver on the IOP. For example * on the SCC IOP there is one channel for each serial port. Each channel has * an incoming and and outgoing message queue with a depth of one. * diff --git a/arch/m68k/math-emu/fp_decode.h b/arch/m68k/math-emu/fp_decode.h index 759679d..6d1e760 100644 --- a/arch/m68k/math-emu/fp_decode.h +++ b/arch/m68k/math-emu/fp_decode.h @@ -130,7 +130,7 @@ do_fscc=0 bfextu %d2{#13,#3},%d0 .endm -| decode the 8bit diplacement from the brief extension word +| decode the 8bit displacement from the brief extension word .macro fp_decode_disp8 move.b %d2,%d0 ext.w %d0 -- cgit v0.10.2 From a99cde438de0c4c0cecc1d1af1a55a75b10bfdef Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Jul 2016 23:01:00 -0700 Subject: Linux 4.7-rc6 diff --git a/Makefile b/Makefile index 2d24bab..0d50489 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* -- cgit v0.10.2 From 0caa7616a6aca449dd68b58cb29bd491d296c2d5 Mon Sep 17 00:00:00 2001 From: Aaron Campbell Date: Sat, 2 Jul 2016 21:23:24 -0300 Subject: iommu/vt-d: Fix infinite loop in free_all_cpu_cached_iovas Per VT-d spec Section 10.4.2 ("Capability Register"), the maximum number of possible domains is 64K; indeed this is the maximum value that the cap_ndoms() macro will expand to. Since the value 65536 will not fix in a u16, the 'did' variable must be promoted to an int, otherwise the test for < 65536 will always be true and the loop will never end. The symptom, in my case, was a hung machine during suspend. Fixes: 3bd4f9112f87 ("iommu/vt-d: Fix overflow of iommu->domains array") Signed-off-by: Aaron Campbell Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index cfe410e..323dac9 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4602,13 +4602,13 @@ static void free_all_cpu_cached_iovas(unsigned int cpu) for (i = 0; i < g_num_of_iommus; i++) { struct intel_iommu *iommu = g_iommus[i]; struct dmar_domain *domain; - u16 did; + int did; if (!iommu) continue; for (did = 0; did < cap_ndoms(iommu->cap); did++) { - domain = get_iommu_domain(iommu, did); + domain = get_iommu_domain(iommu, (u16)did); if (!domain) continue; -- cgit v0.10.2 From 3fa6993fef634e05d200d141a85df0b044572364 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 4 Jul 2016 14:02:15 +0200 Subject: ALSA: timer: Fix negative queue usage by racy accesses The user timer tu->qused counter may go to a negative value when multiple concurrent reads are performed since both the check and the decrement of tu->qused are done in two individual locked contexts. This results in bogus read outs, and the endless loop in the user-space side. The fix is to move the decrement of the tu->qused counter into the same spinlock context as the zero-check of the counter. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/timer.c b/sound/core/timer.c index e722022..9a6157e 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1955,6 +1955,7 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, qhead = tu->qhead++; tu->qhead %= tu->queue_size; + tu->qused--; spin_unlock_irq(&tu->qlock); if (tu->tread) { @@ -1968,7 +1969,6 @@ static ssize_t snd_timer_user_read(struct file *file, char __user *buffer, } spin_lock_irq(&tu->qlock); - tu->qused--; if (err < 0) goto _error; result += unit; -- cgit v0.10.2 From dbd1b8ea43b17e2ed4acda72f83ea17f69408682 Mon Sep 17 00:00:00 2001 From: "Shreyas B. Prabhu" Date: Fri, 1 Jul 2016 09:24:14 -0500 Subject: cpuidle: Fix last_residency division Snooze is a poll idle state in powernv and pseries platforms. Snooze has a timeout so that if a CPU stays in snooze for more than target residency of the next available idle state, then it would exit thereby giving chance to the cpuidle governor to re-evaluate and promote the CPU to a deeper idle state. Therefore whenever snooze exits due to this timeout, its last_residency will be target_residency of the next deeper state. Commit e93e59ce5b85 "cpuidle: Replace ktime_get() with local_clock()" changed the math around last_residency calculation. Specifically, while converting last_residency value from nano- to microseconds, it carries out right shift by 10. Because of that, in snooze timeout exit scenarios last_residency calculated is roughly 2.3% less than target_residency of the next available state. This pattern is picked up by get_typical_interval() in the menu governor and therefore expected_interval in menu_select() is frequently less than the target_residency of any state other than snooze. Due to this we are entering snooze at a higher rate, thereby affecting the single thread performance. Fix this by using more precise division via ktime_us_delta(). Fixes: e93e59ce5b85 "cpuidle: Replace ktime_get() with local_clock()" Reported-by: Anton Blanchard Bisected-by: Shilpasri G Bhat Signed-off-by: Shreyas B. Prabhu Acked-by: Daniel Lezcano Acked-by: Balbir Singh Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index a4d0059..c73207a 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -173,7 +173,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, struct cpuidle_state *target_state = &drv->states[index]; bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP); - u64 time_start, time_end; + ktime_t time_start, time_end; s64 diff; /* @@ -195,13 +195,13 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, sched_idle_set_state(target_state); trace_cpu_idle_rcuidle(index, dev->cpu); - time_start = local_clock(); + time_start = ns_to_ktime(local_clock()); stop_critical_timings(); entered_state = target_state->enter(dev, drv, index); start_critical_timings(); - time_end = local_clock(); + time_end = ns_to_ktime(local_clock()); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu); /* The cpu is no longer idle or about to enter idle. */ @@ -217,11 +217,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, if (!cpuidle_state_is_coupled(drv, index)) local_irq_enable(); - /* - * local_clock() returns the time in nanosecond, let's shift - * by 10 (divide by 1024) to have microsecond based time. - */ - diff = (time_end - time_start) >> 10; + diff = ktime_us_delta(time_end, time_start); if (diff > INT_MAX) diff = INT_MAX; -- cgit v0.10.2 From b99c2d913810e56682a538c9f2394d76fca808f8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 4 Jul 2016 16:49:48 +0200 Subject: ovl: handle ATTR_KILL* Before 4bacc9c9234c ("overlayfs: Make f_path...") file->f_path pointed to the underlying file, hence suid/sgid removal on write worked fine. After that patch file->f_path pointed to the overlay file, and the file mode bits weren't copied to overlay_inode->i_mode. So the suid/sgid removal simply stopped working. The fix is to copy the mode bits, but then ovl_setattr() needs to clear ATTR_MODE to avoid the BUG() in notify_change(). So do this first, then in the next patch copy the mode. Reported-by: Eryu Guan Signed-off-by: Miklos Szeredi Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index c831c2e..1233992 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -80,6 +80,9 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr) goto out_drop_write; } + if (attr->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) + attr->ia_valid &= ~ATTR_MODE; + inode_lock(upperdentry->d_inode); err = notify_change(upperdentry, attr, NULL); if (!err) -- cgit v0.10.2 From 07a2daab49c549a37b5b744cbebb6e3f445f12bc Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 1 Jul 2016 16:34:25 -0400 Subject: ovl: Copy up underlying inode's ->i_mode to overlay inode Right now when a new overlay inode is created, we initialize overlay inode's ->i_mode from underlying inode ->i_mode but we retain only file type bits (S_IFMT) and discard permission bits. This patch changes it and retains permission bits too. This should allow overlay to do permission checks on overlay inode itself in task context. [SzM] It also fixes clearing suid/sgid bits on write. Signed-off-by: Vivek Goyal Reported-by: Eryu Guan Signed-off-by: Miklos Szeredi Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index 1233992..d1cdc60 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -413,12 +413,11 @@ struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, if (!inode) return NULL; - mode &= S_IFMT; - inode->i_ino = get_next_ino(); inode->i_mode = mode; inode->i_flags |= S_NOATIME | S_NOCMTIME; + mode &= S_IFMT; switch (mode) { case S_IFDIR: inode->i_private = oe; diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index 4bd9b5b..cfbca53 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -187,6 +187,7 @@ static inline void ovl_copyattr(struct inode *from, struct inode *to) { to->i_uid = from->i_uid; to->i_gid = from->i_gid; + to->i_mode = from->i_mode; } /* dir.c */ -- cgit v0.10.2 From 87041a58d3b19455d39baed2a5e5bb43b58fb915 Mon Sep 17 00:00:00 2001 From: Colin Pitrat Date: Sat, 18 Jun 2016 19:05:04 +0100 Subject: gpio: sch: Fix Oops on module load on Asus Eee PC 1201 This fixes the issue descirbe in bug 117531 (https://bugzilla.kernel.org/show_bug.cgi?id=117531). It's a regression introduced in linux 4.5 that causes a Oops at load of gpio_sch and prevents powering off the computer. The issue is that sch_gpio_reg_set is called in sch_gpio_probe before gpio_chip data is initialized with the pointer to the sch_gpio struct. As sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes the Oops. The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a sch_gpio struct directly instead of a gpio_chip, which avoids the call to gpiochip_get_data. Thanks Mika for your patience with me :-) Cc: stable@vger.kernel.org Signed-off-by: Colin Pitrat Acked-by: Alexandre Courbot Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index e85e753..eb43ae4 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -61,9 +61,8 @@ static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio) return gpio % 8; } -static int sch_gpio_reg_get(struct gpio_chip *gc, unsigned gpio, unsigned reg) +static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned gpio, unsigned reg) { - struct sch_gpio *sch = gpiochip_get_data(gc); unsigned short offset, bit; u8 reg_val; @@ -75,10 +74,9 @@ static int sch_gpio_reg_get(struct gpio_chip *gc, unsigned gpio, unsigned reg) return reg_val; } -static void sch_gpio_reg_set(struct gpio_chip *gc, unsigned gpio, unsigned reg, +static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned gpio, unsigned reg, int val) { - struct sch_gpio *sch = gpiochip_get_data(gc); unsigned short offset, bit; u8 reg_val; @@ -98,14 +96,15 @@ static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num) struct sch_gpio *sch = gpiochip_get_data(gc); spin_lock(&sch->lock); - sch_gpio_reg_set(gc, gpio_num, GIO, 1); + sch_gpio_reg_set(sch, gpio_num, GIO, 1); spin_unlock(&sch->lock); return 0; } static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num) { - return sch_gpio_reg_get(gc, gpio_num, GLV); + struct sch_gpio *sch = gpiochip_get_data(gc); + return sch_gpio_reg_get(sch, gpio_num, GLV); } static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val) @@ -113,7 +112,7 @@ static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val) struct sch_gpio *sch = gpiochip_get_data(gc); spin_lock(&sch->lock); - sch_gpio_reg_set(gc, gpio_num, GLV, val); + sch_gpio_reg_set(sch, gpio_num, GLV, val); spin_unlock(&sch->lock); } @@ -123,7 +122,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num, struct sch_gpio *sch = gpiochip_get_data(gc); spin_lock(&sch->lock); - sch_gpio_reg_set(gc, gpio_num, GIO, 0); + sch_gpio_reg_set(sch, gpio_num, GIO, 0); spin_unlock(&sch->lock); /* @@ -182,13 +181,13 @@ static int sch_gpio_probe(struct platform_device *pdev) * GPIO7 is configured by the CMC as SLPIOVR * Enable GPIO[9:8] core powered gpios explicitly */ - sch_gpio_reg_set(&sch->chip, 8, GEN, 1); - sch_gpio_reg_set(&sch->chip, 9, GEN, 1); + sch_gpio_reg_set(sch, 8, GEN, 1); + sch_gpio_reg_set(sch, 9, GEN, 1); /* * SUS_GPIO[2:0] enabled by default * Enable SUS_GPIO3 resume powered gpio explicitly */ - sch_gpio_reg_set(&sch->chip, 13, GEN, 1); + sch_gpio_reg_set(sch, 13, GEN, 1); break; case PCI_DEVICE_ID_INTEL_ITC_LPC: -- cgit v0.10.2 From 85b03b3033fd4eba82665b3b9902c095a08cc52f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 3 Jul 2016 18:32:05 +0200 Subject: Revert "gpiolib: Split GPIO flags parsing and GPIO configuration" This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Cc: stable # 4.4 Signed-off-by: Johan Hovold Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c index 3a5c701..8b83099 100644 --- a/drivers/gpio/gpiolib-legacy.c +++ b/drivers/gpio/gpiolib-legacy.c @@ -28,6 +28,10 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (!desc && gpio_is_valid(gpio)) return -EPROBE_DEFER; + err = gpiod_request(desc, label); + if (err) + return err; + if (flags & GPIOF_OPEN_DRAIN) set_bit(FLAG_OPEN_DRAIN, &desc->flags); @@ -37,10 +41,6 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (flags & GPIOF_ACTIVE_LOW) set_bit(FLAG_ACTIVE_LOW, &desc->flags); - err = gpiod_request(desc, label); - if (err) - return err; - if (flags & GPIOF_DIR_IN) err = gpiod_direction_input(desc); else diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 570771e..be74bd3 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1352,14 +1352,6 @@ static int __gpiod_request(struct gpio_desc *desc, const char *label) spin_lock_irqsave(&gpio_lock, flags); } done: - if (status < 0) { - /* Clear flags that might have been set by the caller before - * requesting the GPIO. - */ - clear_bit(FLAG_ACTIVE_LOW, &desc->flags); - clear_bit(FLAG_OPEN_DRAIN, &desc->flags); - clear_bit(FLAG_OPEN_SOURCE, &desc->flags); - } spin_unlock_irqrestore(&gpio_lock, flags); return status; } @@ -2587,28 +2579,13 @@ struct gpio_desc *__must_check gpiod_get_optional(struct device *dev, } EXPORT_SYMBOL_GPL(gpiod_get_optional); -/** - * gpiod_parse_flags - helper function to parse GPIO lookup flags - * @desc: gpio to be setup - * @lflags: gpio_lookup_flags - returned from of_find_gpio() or - * of_get_gpio_hog() - * - * Set the GPIO descriptor flags based on the given GPIO lookup flags. - */ -static void gpiod_parse_flags(struct gpio_desc *desc, unsigned long lflags) -{ - if (lflags & GPIO_ACTIVE_LOW) - set_bit(FLAG_ACTIVE_LOW, &desc->flags); - if (lflags & GPIO_OPEN_DRAIN) - set_bit(FLAG_OPEN_DRAIN, &desc->flags); - if (lflags & GPIO_OPEN_SOURCE) - set_bit(FLAG_OPEN_SOURCE, &desc->flags); -} /** * gpiod_configure_flags - helper function to configure a given GPIO * @desc: gpio whose value will be assigned * @con_id: function within the GPIO consumer + * @lflags: gpio_lookup_flags - returned from of_find_gpio() or + * of_get_gpio_hog() * @dflags: gpiod_flags - optional GPIO initialization flags * * Return 0 on success, -ENOENT if no GPIO has been assigned to the @@ -2616,10 +2593,17 @@ static void gpiod_parse_flags(struct gpio_desc *desc, unsigned long lflags) * occurred while trying to acquire the GPIO. */ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id, - enum gpiod_flags dflags) + unsigned long lflags, enum gpiod_flags dflags) { int status; + if (lflags & GPIO_ACTIVE_LOW) + set_bit(FLAG_ACTIVE_LOW, &desc->flags); + if (lflags & GPIO_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &desc->flags); + if (lflags & GPIO_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &desc->flags); + /* No particular flag request, return here... */ if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) { pr_debug("no flags found for %s\n", con_id); @@ -2686,13 +2670,11 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, return desc; } - gpiod_parse_flags(desc, lookupflags); - status = gpiod_request(desc, con_id); if (status < 0) return ERR_PTR(status); - status = gpiod_configure_flags(desc, con_id, flags); + status = gpiod_configure_flags(desc, con_id, lookupflags, flags); if (status < 0) { dev_dbg(dev, "setup of GPIO %s failed\n", con_id); gpiod_put(desc); @@ -2748,6 +2730,10 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode, if (IS_ERR(desc)) return desc; + ret = gpiod_request(desc, NULL); + if (ret) + return ERR_PTR(ret); + if (active_low) set_bit(FLAG_ACTIVE_LOW, &desc->flags); @@ -2758,10 +2744,6 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode, set_bit(FLAG_OPEN_SOURCE, &desc->flags); } - ret = gpiod_request(desc, NULL); - if (ret) - return ERR_PTR(ret); - return desc; } EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod); @@ -2814,8 +2796,6 @@ int gpiod_hog(struct gpio_desc *desc, const char *name, chip = gpiod_to_chip(desc); hwnum = gpio_chip_hwgpio(desc); - gpiod_parse_flags(desc, lflags); - local_desc = gpiochip_request_own_desc(chip, hwnum, name); if (IS_ERR(local_desc)) { status = PTR_ERR(local_desc); @@ -2824,7 +2804,7 @@ int gpiod_hog(struct gpio_desc *desc, const char *name, return status; } - status = gpiod_configure_flags(desc, name, dflags); + status = gpiod_configure_flags(desc, name, lflags, dflags); if (status < 0) { pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n", name, chip->label, hwnum, status); -- cgit v0.10.2 From d5d5e8d55732c7c35c354e45e3b0af2795978a57 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 2 Jul 2016 15:02:48 +0800 Subject: geneve: fix max_mtu setting For ipv6+udp+geneve encapsulation data, the max_mtu should subtract sizeof(ipv6hdr), instead of sizeof(iphdr). Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index cc39cef..9b3dc3c 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1072,12 +1072,17 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) static int __geneve_change_mtu(struct net_device *dev, int new_mtu, bool strict) { + struct geneve_dev *geneve = netdev_priv(dev); /* The max_mtu calculation does not take account of GENEVE * options, to avoid excluding potentially valid * configurations. */ - int max_mtu = IP_MAX_MTU - GENEVE_BASE_HLEN - sizeof(struct iphdr) - - dev->hard_header_len; + int max_mtu = IP_MAX_MTU - GENEVE_BASE_HLEN - dev->hard_header_len; + + if (geneve->remote.sa.sa_family == AF_INET6) + max_mtu -= sizeof(struct ipv6hdr); + else + max_mtu -= sizeof(struct iphdr); if (new_mtu < 68) return -EINVAL; -- cgit v0.10.2 From 3dad5424adfb346c871847d467f97dcdca64ea97 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 3 Jul 2016 10:54:54 +0200 Subject: RDS: fix rds_tcp_init() error path If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: stable@vger.kernel.org Cc: Sowmini Varadhan Cc: David S. Miller Signed-off-by: Vegard Nossum Acked-by: Sowmini Varadhan Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller diff --git a/net/rds/tcp.c b/net/rds/tcp.c index 74ee126..c8a7b4c 100644 --- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -616,7 +616,7 @@ static int rds_tcp_init(void) ret = rds_tcp_recv_init(); if (ret) - goto out_slab; + goto out_pernet; ret = rds_trans_register(&rds_tcp_transport); if (ret) @@ -628,8 +628,9 @@ static int rds_tcp_init(void) out_recv: rds_tcp_recv_exit(); -out_slab: +out_pernet: unregister_pernet_subsys(&rds_tcp_net_ops); +out_slab: kmem_cache_destroy(rds_tcp_conn_slab); out: return ret; -- cgit v0.10.2 From c086e7096170390594c425114d98172bc9aceb8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 3 Jul 2016 22:24:50 +0200 Subject: cdc_ncm: workaround for EM7455 "silent" data interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Several Lenovo users have reported problems with their Sierra Wireless EM7455 modem. The driver has loaded successfully and the MBIM management channel has appeared to work, including establishing a connection to the mobile network. But no frames have been received over the data interface. The problem affects all EM7455 and MC7455, and is assumed to affect other modems based on the same Qualcomm chipset and baseband firmware. Testing narrowed the problem down to what seems to be a firmware timing bug during initialization. Adding a short sleep while probing is sufficient to make the problem disappear. Experiments have shown that 1-2 ms is too little to have any effect, while 10-20 ms is enough to reliably succeed. Reported-by: Stefan Armbruster Reported-by: Ralph Plawetzki Reported-by: Andreas Fett Reported-by: Rasmus Lerdorf Reported-by: Samo Ratnik Reported-and-tested-by: Aleksander Morgado Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 53759c3..877c951 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -854,6 +854,13 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ if (cdc_ncm_init(dev)) goto error2; + /* Some firmwares need a pause here or they will silently fail + * to set up the interface properly. This value was decided + * empirically on a Sierra Wireless MC7455 running 02.08.02.00 + * firmware. + */ + usleep_range(10000, 20000); + /* configure data interface */ temp = usb_set_interface(dev->udev, iface_no, data_altsetting); if (temp) { -- cgit v0.10.2 From a788a4a040e003574b8ad17115706ab1601ec572 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Mon, 4 Jul 2016 07:46:42 +0200 Subject: fsl/fman: fix error handling This is likely that checking 'fman->fifo_offset' instead of 'fman->cam_offset' is expected here. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index 1de2e1e..f634e769 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2036,7 +2036,7 @@ static int fman_init(struct fman *fman) /* allocate MURAM for FIFO according to total size */ fman->fifo_offset = fman_muram_alloc(fman->muram, fman->state->total_fifo_size); - if (IS_ERR_VALUE(fman->cam_offset)) { + if (IS_ERR_VALUE(fman->fifo_offset)) { free_init_resources(fman); dev_err(fman->dev, "%s: MURAM alloc for BMI FIFO failed\n", __func__); -- cgit v0.10.2 From c8e2ca30fdba613c088ab2fd5ac7b9c69b402559 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jul 2016 17:16:41 -0700 Subject: Revert "fsl/fman: fix error handling" This reverts commit a788a4a040e003574b8ad17115706ab1601ec572. This patch is wrong, the type returned doesn't fit what the error pointer macros expect. Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index f634e769..1de2e1e 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2036,7 +2036,7 @@ static int fman_init(struct fman *fman) /* allocate MURAM for FIFO according to total size */ fman->fifo_offset = fman_muram_alloc(fman->muram, fman->state->total_fifo_size); - if (IS_ERR_VALUE(fman->fifo_offset)) { + if (IS_ERR_VALUE(fman->cam_offset)) { free_init_resources(fman); dev_err(fman->dev, "%s: MURAM alloc for BMI FIFO failed\n", __func__); -- cgit v0.10.2 From 7831b4ff0d926e0deeaabef9db8800ed069a2757 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 4 Jul 2016 14:07:16 +0200 Subject: qeth: delete napi struct when removing a qeth device A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c9ca ("qeth: NAPI support for l2 and l3 discipline") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Ursula Braun Tested-by: Alexander Klein Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 80b1979..df036b8 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1051,6 +1051,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev) qeth_l2_set_offline(cgdev); if (card->dev) { + netif_napi_del(&card->napi); unregister_netdev(card->dev); card->dev = NULL; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index ac54433..709b523 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3226,6 +3226,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) qeth_l3_set_offline(cgdev); if (card->dev) { + netif_napi_del(&card->napi); unregister_netdev(card->dev); card->dev = NULL; } -- cgit v0.10.2 From 3b8e64f6f8e2d437b15572f445b1932a45f9be6a Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 5 Jul 2016 10:04:53 +0800 Subject: gpu: drm: sun4i_drv: add missing of_node_put after calling of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Maxime Ripard Cc: Chen-Yu Tsai Signed-off-by: Peter Chen Signed-off-by: Maxime Ripard diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index cbe4a25..937394c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -310,6 +310,7 @@ static int sun4i_drv_probe(struct platform_device *pdev) count += sun4i_drv_add_endpoints(&pdev->dev, &match, pipeline); + of_node_put(pipeline); DRM_DEBUG_DRIVER("Queued %d outputs on pipeline %d\n", count, i); -- cgit v0.10.2 From 9cd25743765cfe851aed8d655a62d60156aed293 Mon Sep 17 00:00:00 2001 From: Torsten Hilbrich Date: Tue, 5 Jul 2016 10:40:22 +0200 Subject: ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup This solves the issue that a headphone is not working on the docking unit. Signed-off-by: Torsten Hilbrich Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 900bfbc..5fac786 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5651,6 +5651,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x504a, "ThinkPad X260", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x504b, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE), SND_PCI_QUIRK(0x17aa, 0x5050, "Thinkpad T560p", ALC292_FIXUP_TPT460), + SND_PCI_QUIRK(0x17aa, 0x5051, "Thinkpad L460", ALC292_FIXUP_TPT460), SND_PCI_QUIRK(0x17aa, 0x5053, "Thinkpad T460", ALC292_FIXUP_TPT460), SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), -- cgit v0.10.2 From 10c78f5854d361ded4736c1831948e0a5f67b932 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jul 2016 09:52:13 +0200 Subject: batman-adv: Avoid nullptr dereference in bla after vlan_insert_tag vlan_insert_tag can return NULL on errors. The bridge loop avoidance code therefore has to check the return value of vlan_insert_tag for NULL before it can safely operate on this pointer. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 748a9ea..7129780 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -418,9 +418,12 @@ static void batadv_bla_send_claim(struct batadv_priv *bat_priv, u8 *mac, break; } - if (vid & BATADV_VLAN_HAS_TAG) + if (vid & BATADV_VLAN_HAS_TAG) { skb = vlan_insert_tag(skb, htons(ETH_P_8021Q), vid & VLAN_VID_MASK); + if (!skb) + goto out; + } skb_reset_mac_header(skb); skb->protocol = eth_type_trans(skb, soft_iface); -- cgit v0.10.2 From 60154a1e0495ffb8343a95cefe1e874634572fa8 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jul 2016 09:52:14 +0200 Subject: batman-adv: Avoid nullptr dereference in dat after vlan_insert_tag vlan_insert_tag can return NULL on errors. The distributed arp table code therefore has to check the return value of vlan_insert_tag for NULL before it can safely operate on this pointer. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 278800a..aee3b39 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -1009,9 +1009,12 @@ bool batadv_dat_snoop_outgoing_arp_request(struct batadv_priv *bat_priv, if (!skb_new) goto out; - if (vid & BATADV_VLAN_HAS_TAG) + if (vid & BATADV_VLAN_HAS_TAG) { skb_new = vlan_insert_tag(skb_new, htons(ETH_P_8021Q), vid & VLAN_VID_MASK); + if (!skb_new) + goto out; + } skb_reset_mac_header(skb_new); skb_new->protocol = eth_type_trans(skb_new, @@ -1089,9 +1092,12 @@ bool batadv_dat_snoop_incoming_arp_request(struct batadv_priv *bat_priv, */ skb_reset_mac_header(skb_new); - if (vid & BATADV_VLAN_HAS_TAG) + if (vid & BATADV_VLAN_HAS_TAG) { skb_new = vlan_insert_tag(skb_new, htons(ETH_P_8021Q), vid & VLAN_VID_MASK); + if (!skb_new) + goto out; + } /* To preserve backwards compatibility, the node has choose the outgoing * format based on the incoming request packet type. The assumption is -- cgit v0.10.2 From 33fbb1f3db87ce53da925b3e034b4dd446d483f8 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 30 Jun 2016 20:10:46 +0200 Subject: batman-adv: Fix orig_node_vlan leak on orig_node_release batadv_orig_node_new uses batadv_orig_node_vlan_new to allocate a new batadv_orig_node_vlan and add it to batadv_orig_node::vlan_list. References to this list have also to be cleaned when the batadv_orig_node is removed. Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 7f51bc2..fe2fcda 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -765,6 +765,7 @@ static void batadv_orig_node_release(struct kref *ref) struct batadv_neigh_node *neigh_node; struct batadv_orig_node *orig_node; struct batadv_orig_ifinfo *orig_ifinfo; + struct batadv_orig_node_vlan *vlan; orig_node = container_of(ref, struct batadv_orig_node, refcount); @@ -784,6 +785,13 @@ static void batadv_orig_node_release(struct kref *ref) } spin_unlock_bh(&orig_node->neigh_list_lock); + spin_lock_bh(&orig_node->vlan_list_lock); + hlist_for_each_entry_safe(vlan, node_tmp, &orig_node->vlan_list, list) { + hlist_del_rcu(&vlan->list); + batadv_orig_node_vlan_put(vlan); + } + spin_unlock_bh(&orig_node->vlan_list_lock); + /* Free nc_nodes */ batadv_nc_purge_orig(orig_node->bat_priv, orig_node, NULL); -- cgit v0.10.2 From 3db0decf1185357d6ab2256d0dede1ca9efda03d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 1 Jul 2016 15:49:43 +0200 Subject: batman-adv: Fix non-atomic bla_claim::backbone_gw access The pointer batadv_bla_claim::backbone_gw can be changed at any time. Therefore, access to it must be protected to ensure that two function accessing the same backbone_gw are actually accessing the same. This is especially important when the crc_lock is used or when the backbone_gw of a claim is exchanged. Not doing so leads to invalid memory access and/or reference leaks. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Fixes: 5a1dd8a4773d ("batman-adv: lock crc access in bridge loop avoidance") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 7129780..825a5cd 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -177,10 +177,21 @@ static void batadv_backbone_gw_put(struct batadv_bla_backbone_gw *backbone_gw) static void batadv_claim_release(struct kref *ref) { struct batadv_bla_claim *claim; + struct batadv_bla_backbone_gw *old_backbone_gw; claim = container_of(ref, struct batadv_bla_claim, refcount); - batadv_backbone_gw_put(claim->backbone_gw); + spin_lock_bh(&claim->backbone_lock); + old_backbone_gw = claim->backbone_gw; + claim->backbone_gw = NULL; + spin_unlock_bh(&claim->backbone_lock); + + spin_lock_bh(&old_backbone_gw->crc_lock); + old_backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); + spin_unlock_bh(&old_backbone_gw->crc_lock); + + batadv_backbone_gw_put(old_backbone_gw); + kfree_rcu(claim, rcu); } @@ -677,8 +688,10 @@ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, const u8 *mac, const unsigned short vid, struct batadv_bla_backbone_gw *backbone_gw) { + struct batadv_bla_backbone_gw *old_backbone_gw; struct batadv_bla_claim *claim; struct batadv_bla_claim search_claim; + bool remove_crc = false; int hash_added; ether_addr_copy(search_claim.addr, mac); @@ -692,8 +705,10 @@ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, return; ether_addr_copy(claim->addr, mac); + spin_lock_init(&claim->backbone_lock); claim->vid = vid; claim->lasttime = jiffies; + kref_get(&backbone_gw->refcount); claim->backbone_gw = backbone_gw; kref_init(&claim->refcount); @@ -721,15 +736,26 @@ static void batadv_bla_add_claim(struct batadv_priv *bat_priv, "bla_add_claim(): changing ownership for %pM, vid %d\n", mac, BATADV_PRINT_VID(vid)); - spin_lock_bh(&claim->backbone_gw->crc_lock); - claim->backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); - spin_unlock_bh(&claim->backbone_gw->crc_lock); - batadv_backbone_gw_put(claim->backbone_gw); + remove_crc = true; } - /* set (new) backbone gw */ + + /* replace backbone_gw atomically and adjust reference counters */ + spin_lock_bh(&claim->backbone_lock); + old_backbone_gw = claim->backbone_gw; kref_get(&backbone_gw->refcount); claim->backbone_gw = backbone_gw; + spin_unlock_bh(&claim->backbone_lock); + + if (remove_crc) { + /* remove claim address from old backbone_gw */ + spin_lock_bh(&old_backbone_gw->crc_lock); + old_backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); + spin_unlock_bh(&old_backbone_gw->crc_lock); + } + batadv_backbone_gw_put(old_backbone_gw); + + /* add claim address to new backbone_gw */ spin_lock_bh(&backbone_gw->crc_lock); backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); spin_unlock_bh(&backbone_gw->crc_lock); @@ -740,6 +766,26 @@ claim_free_ref: } /** + * batadv_bla_claim_get_backbone_gw - Get valid reference for backbone_gw of + * claim + * @claim: claim whose backbone_gw should be returned + * + * Return: valid reference to claim::backbone_gw + */ +static struct batadv_bla_backbone_gw * +batadv_bla_claim_get_backbone_gw(struct batadv_bla_claim *claim) +{ + struct batadv_bla_backbone_gw *backbone_gw; + + spin_lock_bh(&claim->backbone_lock); + backbone_gw = claim->backbone_gw; + kref_get(&backbone_gw->refcount); + spin_unlock_bh(&claim->backbone_lock); + + return backbone_gw; +} + +/** * batadv_bla_del_claim - delete a claim from the claim hash * @bat_priv: the bat priv with all the soft interface information * @mac: mac address of the claim to be removed @@ -763,10 +809,6 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv, batadv_choose_claim, claim); batadv_claim_put(claim); /* reference from the hash is gone */ - spin_lock_bh(&claim->backbone_gw->crc_lock); - claim->backbone_gw->crc ^= crc16(0, claim->addr, ETH_ALEN); - spin_unlock_bh(&claim->backbone_gw->crc_lock); - /* don't need the reference from hash_find() anymore */ batadv_claim_put(claim); } @@ -1219,6 +1261,7 @@ static void batadv_bla_purge_claims(struct batadv_priv *bat_priv, struct batadv_hard_iface *primary_if, int now) { + struct batadv_bla_backbone_gw *backbone_gw; struct batadv_bla_claim *claim; struct hlist_head *head; struct batadv_hashtable *hash; @@ -1233,14 +1276,17 @@ static void batadv_bla_purge_claims(struct batadv_priv *bat_priv, rcu_read_lock(); hlist_for_each_entry_rcu(claim, head, hash_entry) { + backbone_gw = batadv_bla_claim_get_backbone_gw(claim); if (now) goto purge_now; - if (!batadv_compare_eth(claim->backbone_gw->orig, + + if (!batadv_compare_eth(backbone_gw->orig, primary_if->net_dev->dev_addr)) - continue; + goto skip; + if (!batadv_has_timed_out(claim->lasttime, BATADV_BLA_CLAIM_TIMEOUT)) - continue; + goto skip; batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_purge_claims(): %pM, vid %d, time out\n", @@ -1248,8 +1294,10 @@ static void batadv_bla_purge_claims(struct batadv_priv *bat_priv, purge_now: batadv_handle_unclaim(bat_priv, primary_if, - claim->backbone_gw->orig, + backbone_gw->orig, claim->addr, claim->vid); +skip: + batadv_backbone_gw_put(backbone_gw); } rcu_read_unlock(); } @@ -1760,9 +1808,11 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb, bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb, unsigned short vid, bool is_bcast) { + struct batadv_bla_backbone_gw *backbone_gw; struct ethhdr *ethhdr; struct batadv_bla_claim search_claim, *claim = NULL; struct batadv_hard_iface *primary_if; + bool own_claim; bool ret; ethhdr = eth_hdr(skb); @@ -1797,8 +1847,12 @@ bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb, } /* if it is our own claim ... */ - if (batadv_compare_eth(claim->backbone_gw->orig, - primary_if->net_dev->dev_addr)) { + backbone_gw = batadv_bla_claim_get_backbone_gw(claim); + own_claim = batadv_compare_eth(backbone_gw->orig, + primary_if->net_dev->dev_addr); + batadv_backbone_gw_put(backbone_gw); + + if (own_claim) { /* ... allow it in any case */ claim->lasttime = jiffies; goto allow; @@ -1862,7 +1916,9 @@ bool batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb, { struct ethhdr *ethhdr; struct batadv_bla_claim search_claim, *claim = NULL; + struct batadv_bla_backbone_gw *backbone_gw; struct batadv_hard_iface *primary_if; + bool client_roamed; bool ret = false; primary_if = batadv_primary_if_get_selected(bat_priv); @@ -1892,8 +1948,12 @@ bool batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb, goto allow; /* check if we are responsible. */ - if (batadv_compare_eth(claim->backbone_gw->orig, - primary_if->net_dev->dev_addr)) { + backbone_gw = batadv_bla_claim_get_backbone_gw(claim); + client_roamed = batadv_compare_eth(backbone_gw->orig, + primary_if->net_dev->dev_addr); + batadv_backbone_gw_put(backbone_gw); + + if (client_roamed) { /* if yes, the client has roamed and we have * to unclaim it. */ @@ -1941,6 +2001,7 @@ int batadv_bla_claim_table_seq_print_text(struct seq_file *seq, void *offset) struct net_device *net_dev = (struct net_device *)seq->private; struct batadv_priv *bat_priv = netdev_priv(net_dev); struct batadv_hashtable *hash = bat_priv->bla.claim_hash; + struct batadv_bla_backbone_gw *backbone_gw; struct batadv_bla_claim *claim; struct batadv_hard_iface *primary_if; struct hlist_head *head; @@ -1965,17 +2026,21 @@ int batadv_bla_claim_table_seq_print_text(struct seq_file *seq, void *offset) rcu_read_lock(); hlist_for_each_entry_rcu(claim, head, hash_entry) { - is_own = batadv_compare_eth(claim->backbone_gw->orig, + backbone_gw = batadv_bla_claim_get_backbone_gw(claim); + + is_own = batadv_compare_eth(backbone_gw->orig, primary_addr); - spin_lock_bh(&claim->backbone_gw->crc_lock); - backbone_crc = claim->backbone_gw->crc; - spin_unlock_bh(&claim->backbone_gw->crc_lock); + spin_lock_bh(&backbone_gw->crc_lock); + backbone_crc = backbone_gw->crc; + spin_unlock_bh(&backbone_gw->crc_lock); seq_printf(seq, " * %pM on %5d by %pM [%c] (%#.4x)\n", claim->addr, BATADV_PRINT_VID(claim->vid), - claim->backbone_gw->orig, + backbone_gw->orig, (is_own ? 'x' : ' '), backbone_crc); + + batadv_backbone_gw_put(backbone_gw); } rcu_read_unlock(); } diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index ba846b0..0051222 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1042,6 +1042,7 @@ struct batadv_bla_backbone_gw { * @addr: mac address of claimed non-mesh client * @vid: vlan id this client was detected on * @backbone_gw: pointer to backbone gw claiming this client + * @backbone_lock: lock protecting backbone_gw pointer * @lasttime: last time we heard of claim (locals only) * @hash_entry: hlist node for batadv_priv_bla::claim_hash * @refcount: number of contexts the object is used @@ -1051,6 +1052,7 @@ struct batadv_bla_claim { u8 addr[ETH_ALEN]; unsigned short vid; struct batadv_bla_backbone_gw *backbone_gw; + spinlock_t backbone_lock; /* protects backbone_gw */ unsigned long lasttime; struct hlist_node hash_entry; struct rcu_head rcu; -- cgit v0.10.2 From 15c2ed753cd9e3e746472deab8151337a5b6da56 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 30 Jun 2016 20:11:34 +0200 Subject: batman-adv: Fix reference leak in batadv_find_router The replacement of last_bonding_candidate in batadv_orig_node has to be an atomic operation. Otherwise it is possible that the reference counter of a batadv_orig_ifinfo is reduced which was no longer the last_bonding_candidate when the new candidate is added. This can either lead to an invalid memory access or to reference leaks which make it impossible to an interface which was added to batman-adv. Fixes: f3b3d9018975 ("batman-adv: add bonding again") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 6c2901a..bfac086 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -456,6 +456,29 @@ static int batadv_check_unicast_packet(struct batadv_priv *bat_priv, } /** + * batadv_last_bonding_replace - Replace last_bonding_candidate of orig_node + * @orig_node: originator node whose bonding candidates should be replaced + * @new_candidate: new bonding candidate or NULL + */ +static void +batadv_last_bonding_replace(struct batadv_orig_node *orig_node, + struct batadv_orig_ifinfo *new_candidate) +{ + struct batadv_orig_ifinfo *old_candidate; + + spin_lock_bh(&orig_node->neigh_list_lock); + old_candidate = orig_node->last_bonding_candidate; + + if (new_candidate) + kref_get(&new_candidate->refcount); + orig_node->last_bonding_candidate = new_candidate; + spin_unlock_bh(&orig_node->neigh_list_lock); + + if (old_candidate) + batadv_orig_ifinfo_put(old_candidate); +} + +/** * batadv_find_router - find a suitable router for this originator * @bat_priv: the bat priv with all the soft interface information * @orig_node: the destination node @@ -562,10 +585,6 @@ next: } rcu_read_unlock(); - /* last_bonding_candidate is reset below, remove the old reference. */ - if (orig_node->last_bonding_candidate) - batadv_orig_ifinfo_put(orig_node->last_bonding_candidate); - /* After finding candidates, handle the three cases: * 1) there is a next candidate, use that * 2) there is no next candidate, use the first of the list @@ -574,21 +593,28 @@ next: if (next_candidate) { batadv_neigh_node_put(router); - /* remove references to first candidate, we don't need it. */ - if (first_candidate) { - batadv_neigh_node_put(first_candidate_router); - batadv_orig_ifinfo_put(first_candidate); - } + kref_get(&next_candidate_router->refcount); router = next_candidate_router; - orig_node->last_bonding_candidate = next_candidate; + batadv_last_bonding_replace(orig_node, next_candidate); } else if (first_candidate) { batadv_neigh_node_put(router); - /* refcounting has already been done in the loop above. */ + kref_get(&first_candidate_router->refcount); router = first_candidate_router; - orig_node->last_bonding_candidate = first_candidate; + batadv_last_bonding_replace(orig_node, first_candidate); } else { - orig_node->last_bonding_candidate = NULL; + batadv_last_bonding_replace(orig_node, NULL); + } + + /* cleanup of candidates */ + if (first_candidate) { + batadv_neigh_node_put(first_candidate_router); + batadv_orig_ifinfo_put(first_candidate); + } + + if (next_candidate) { + batadv_neigh_node_put(next_candidate_router); + batadv_orig_ifinfo_put(next_candidate); } return router; diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 0051222..74d865a 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -330,7 +330,9 @@ struct batadv_orig_node { DECLARE_BITMAP(bcast_bits, BATADV_TQ_LOCAL_WINDOW_SIZE); u32 last_bcast_seqno; struct hlist_head neigh_list; - /* neigh_list_lock protects: neigh_list and router */ + /* neigh_list_lock protects: neigh_list, ifinfo_list, + * last_bonding_candidate and router + */ spinlock_t neigh_list_lock; struct hlist_node hash_entry; struct batadv_priv *bat_priv; -- cgit v0.10.2 From cbef1e102003edb236c6b2319ab269ccef963731 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 30 Jun 2016 21:41:13 +0200 Subject: batman-adv: Free last_bonding_candidate on release of orig_node The orig_ifinfo reference counter for last_bonding_candidate in batadv_orig_node has to be reduced when an originator node is released. Otherwise the orig_ifinfo is leaked and the reference counter the netdevice is not reduced correctly. Fixes: f3b3d9018975 ("batman-adv: add bonding again") Signed-off-by: Sven Eckelmann Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index fe2fcda..ab8c4f9 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -766,6 +766,7 @@ static void batadv_orig_node_release(struct kref *ref) struct batadv_orig_node *orig_node; struct batadv_orig_ifinfo *orig_ifinfo; struct batadv_orig_node_vlan *vlan; + struct batadv_orig_ifinfo *last_candidate; orig_node = container_of(ref, struct batadv_orig_node, refcount); @@ -783,8 +784,14 @@ static void batadv_orig_node_release(struct kref *ref) hlist_del_rcu(&orig_ifinfo->list); batadv_orig_ifinfo_put(orig_ifinfo); } + + last_candidate = orig_node->last_bonding_candidate; + orig_node->last_bonding_candidate = NULL; spin_unlock_bh(&orig_node->neigh_list_lock); + if (last_candidate) + batadv_orig_ifinfo_put(last_candidate); + spin_lock_bh(&orig_node->vlan_list_lock); hlist_for_each_entry_safe(vlan, node_tmp, &orig_node->vlan_list, list) { hlist_del_rcu(&vlan->list); -- cgit v0.10.2 From 8ca2cf2c8e0d172824ac305391fb4273dd1e3e5a Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Wed, 22 Jun 2016 15:56:58 +0200 Subject: MAINTAINERS: update STM32 maintainers list I will have less time to work on STM32 platform, so I propose Alexandre as co-maintainer. Alex is working in the STMicroelectronics division in charge of STM32 family, so he will have access to all technical information and hardware. Signed-off-by: Maxime Coquelin Cc: Alexandre Torgue Signed-off-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index e1b090f..d8b5450 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1724,6 +1724,7 @@ F: drivers/ata/ahci_st.c ARM/STM32 ARCHITECTURE M: Maxime Coquelin +M: Alexandre Torgue L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git -- cgit v0.10.2 From 3867b228d6aed0e916d8d36119b465cb1946bb32 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Fri, 1 Jul 2016 15:19:56 +0200 Subject: MAINTAINERS: update STi maintainer list Remove myself as STi maintainer as I will no longer have access to STi platforms, and remove Srini too, who now works on other platforms. Patrice will manage the pull requests. Signed-off-by: Maxime Coquelin Cc: Patrice Chotard Cc: Srinivas Kandagatla Cc: Arnd Bergmann Acked-by: Patrice Chotard Acked-by: Srinivas Kandagatla Signed-off-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index d8b5450..73fcd7e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1690,8 +1690,6 @@ S: Maintained F: drivers/edac/altera_edac. ARM/STI ARCHITECTURE -M: Srinivas Kandagatla -M: Maxime Coquelin M: Patrice Chotard L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: kernel@stlinux.com -- cgit v0.10.2 From 99ec8a3608330d202448085185cf28389b789b7b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 5 Jul 2016 14:25:59 +0100 Subject: irqchip/mips-gic: Map to VPs using HW VPNum When mapping an interrupt to a VP(E) we must use the identifier for the VP that the hardware expects, and this does not always match up with the Linux CPU number. Commit d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") corrected this for the cases that existed at the time it was written, but commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") added another case before the former patch was merged. This leads to incorrectly using Linux CPU numbers when mapping interrupts to VPs, which breaks on certain systems such as those with multi-core I6400 CPUs. Fix by adding the appropriate call to mips_cm_vp_id() to retrieve the expected VP identifier. Fixes: d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Qais Yousef Cc: Ralf Baechle Cc: Marc Zyngier Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160705132600.27730-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 8a4adbeb..69b1b82 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -718,7 +718,7 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq, spin_lock_irqsave(&gic_lock, flags); gic_map_to_pin(intr, gic_cpu_pin); - gic_map_to_vpe(intr, vpe); + gic_map_to_vpe(intr, mips_cm_vp_id(vpe)); for (i = 0; i < min(gic_vpes, NR_CPUS); i++) clear_bit(intr, pcpu_masks[i].pcpu_mask); set_bit(intr, pcpu_masks[vpe].pcpu_mask); -- cgit v0.10.2 From 547aefc4db877e65245c3d95fcce703701bf3a0c Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 5 Jul 2016 14:26:00 +0100 Subject: irqchip/mips-gic: Match IPI IRQ domain by bus token only Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced code which calls irq_find_matching_host with a NULL node parameter in order to discover IPI IRQ domains which are not associated with the DT root node's interrupt parent. This suggests that implementations of IPI IRQ domains should effectively ignore the node parameter if it is NULL and search purely based upon the bus token. Commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when implementing the GIC IPI IRQ domain, and on MIPS Boston boards this leads to no IPI domain being discovered and a NULL pointer dereference when attempting to send an IPI: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945 task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000 $ 0 : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003 $ 4 : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000 $ 8 : 0000000000000000 0000000000000023 0000000000000001 0000000000000001 $12 : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000 $16 : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc $20 : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000 $24 : 0000000000000000 ffffffff8012de28 $28 : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c Hi : ffffffff8014c174 Lo : a800000001e1e140 epc : ffffffff8016e70c __ipi_send_mask+0x24/0x11c ra : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178 Status: 140084e2 KX SX UX KERNEL EXL Cause : 00800008 (ExcCode 02) BadVA : 0000000000000040 PrId : 0001a920 (MIPS I6400) Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc 0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c 0000000000000001 0000000000000020 0000000000000000 0000000000000000 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001 0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8 a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002 ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001 ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50 0000000000000003 a800000001e48308 0000000000000003 0000000000000008 ... Call Trace: [] __ipi_send_mask+0x24/0x11c [] mips_smp_send_ipi_mask+0x68/0x178 [] generic_exec_single+0x150/0x170 [] smp_call_function_single+0x108/0x160 [] cps_boot_secondary+0x328/0x394 [] __cpu_up+0x38/0x90 [] bringup_cpu+0x24/0xac [] cpuhp_up_callbacks+0x58/0xdc [] cpu_up+0x118/0x18c [] smp_init+0xbc/0xe8 [] kernel_init_freeable+0xa0/0x228 [] kernel_init+0x10/0xf0 [] ret_from_kernel_thread+0x14/0x1c Fix this by allowing the GIC IPI IRQ domain to match purely based upon the bus token if the node provided is NULL. Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Qais Yousef Cc: Ralf Baechle Cc: Marc Zyngier Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160705132600.27730-2-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 69b1b82..70ed1d0 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -959,7 +959,7 @@ int gic_ipi_domain_match(struct irq_domain *d, struct device_node *node, switch (bus_token) { case DOMAIN_BUS_IPI: is_ipi = d->bus_token == bus_token; - return to_of_node(d->fwnode) == node && is_ipi; + return (!node || to_of_node(d->fwnode) == node) && is_ipi; break; default: return 0; -- cgit v0.10.2 From eab09988e47f2b4322faa5ee1430d05714e59000 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 14 Jun 2016 21:26:46 +0100 Subject: i2c: tegra: Correct error path in probe Commit 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") enables the Tegra I2C 'div_clk' for adapters using the multi-master mode during the device probe. Although the probe error path was updated to disable the clock on probe failure, there is one place after calling tegra_i2c_init() where the clock will not be disabled on failure. Correct the error path so that the 'div_clk' is disabled if calling tegra_i2c_init() fails. Fixes: 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") Signed-off-by: Jon Hunter Acked-by: Laxman Dewangan Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 445398c3..b126dba 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -912,7 +912,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) ret = tegra_i2c_init(i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize i2c controller"); - goto unprepare_div_clk; + goto disable_div_clk; } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, -- cgit v0.10.2 From 22ebf00eb56fe77922de8138aa9af9996582c2b3 Mon Sep 17 00:00:00 2001 From: Lukasz Gemborowski Date: Mon, 27 Jun 2016 12:57:47 +0200 Subject: i2c: mux: reg: wrong condition checked for of_address_to_resource return value of_address_to_resource return 0 on successful call but devm_ioremap_resource is called only if it returns non-zero value Signed-off-by: Lukasz Gemborowski Reviewed-by: Alexander Sverdlin Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 26e7c51..c6a90b4 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -145,7 +145,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, mux->data.idle_in_use = true; /* map address from "reg" if exists */ - if (of_address_to_resource(np, 0, &res)) { + if (of_address_to_resource(np, 0, &res) == 0) { mux->data.reg_size = resource_size(&res); mux->data.reg = devm_ioremap_resource(&pdev->dev, &res); if (IS_ERR(mux->data.reg)) -- cgit v0.10.2 From 92c74bceb0dd4b74a6c0b56c2f9a5c93a0860808 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 5 Jul 2016 08:46:43 +0200 Subject: Revert "gpio: gpiolib-of: Allow compile testing" This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index cebcb40..536112f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -49,7 +49,7 @@ config GPIO_DEVRES config OF_GPIO def_bool y - depends on OF || COMPILE_TEST + depends on OF config GPIO_ACPI def_bool y -- cgit v0.10.2 From 2609af19362d03332b55fc7836e7023bcd6d90bf Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 5 Jul 2016 16:11:46 +0800 Subject: r8152: fix runtime function for RTL8152 The RTL8152 doesn't have U1U2 and U2P3 features, so use different runtime functions for RTL812 and RTL8153 by adding autosuspend_en() to rtl_ops. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index d7f20a9..0da72d3 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "4" +#define NET_VERSION "5" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -624,6 +624,7 @@ struct r8152 { int (*eee_get)(struct r8152 *, struct ethtool_eee *); int (*eee_set)(struct r8152 *, struct ethtool_eee *); bool (*in_nway)(struct r8152 *); + void (*autosuspend_en)(struct r8152 *tp, bool enable); } rtl_ops; int intr_interval; @@ -2408,9 +2409,6 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable) if (enable) { u32 ocp_data; - r8153_u1u2en(tp, false); - r8153_u2p3en(tp, false); - __rtl_set_wol(tp, WAKE_ANY); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); @@ -2432,7 +2430,17 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable) ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); + } +} +static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) +{ + rtl_runtime_suspend_enable(tp, enable); + + if (enable) { + r8153_u1u2en(tp, false); + r8153_u2p3en(tp, false); + } else { r8153_u2p3en(tp, true); r8153_u1u2en(tp, true); } @@ -3523,7 +3531,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) napi_disable(&tp->napi); if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) { rtl_stop_rx(tp); - rtl_runtime_suspend_enable(tp, true); + tp->rtl_ops.autosuspend_en(tp, true); } else { cancel_delayed_work_sync(&tp->schedule); tp->rtl_ops.down(tp); @@ -3549,7 +3557,7 @@ static int rtl8152_resume(struct usb_interface *intf) if (netif_running(tp->netdev) && tp->netdev->flags & IFF_UP) { if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) { - rtl_runtime_suspend_enable(tp, false); + tp->rtl_ops.autosuspend_en(tp, false); clear_bit(SELECTIVE_SUSPEND, &tp->flags); napi_disable(&tp->napi); set_bit(WORK_ENABLE, &tp->flags); @@ -3568,7 +3576,7 @@ static int rtl8152_resume(struct usb_interface *intf) usb_submit_urb(tp->intr_urb, GFP_KERNEL); } else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) { if (tp->netdev->flags & IFF_UP) - rtl_runtime_suspend_enable(tp, false); + tp->rtl_ops.autosuspend_en(tp, false); clear_bit(SELECTIVE_SUSPEND, &tp->flags); } @@ -4148,6 +4156,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->eee_get = r8152_get_eee; ops->eee_set = r8152_set_eee; ops->in_nway = rtl8152_in_nway; + ops->autosuspend_en = rtl_runtime_suspend_enable; break; case RTL_VER_03: @@ -4163,6 +4172,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->eee_get = r8153_get_eee; ops->eee_set = r8153_set_eee; ops->in_nway = rtl8153_in_nway; + ops->autosuspend_en = rtl8153_runtime_enable; break; default: -- cgit v0.10.2 From a30b016808e214c6864ad579ef867b3fe0a314f8 Mon Sep 17 00:00:00 2001 From: Aviv Heller Date: Tue, 5 Jul 2016 12:09:47 +0300 Subject: bonding: fix enslavement slave link notifications Currently, link notifications are not sent by bond_set_slave_link_state() upon enslavement if the slave is enslaved when up. This happens because slave->link default init value is 0, which is the same as BOND_LINK_UP, resulting in bond_set_slave_link_state() ignoring this transition. This patch sets the default value of slave->link to BOND_LINK_NOCHANGE, assuring it will count as a state transition and thus trigger notification logic. Signed-off-by: Aviv Heller Reviewed-by: Jiri Pirko Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 941ec99..a2afa3b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1584,6 +1584,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) } /* check for initial state */ + new_slave->link = BOND_LINK_NOCHANGE; if (bond->params.miimon) { if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) { if (bond->params.updelay) { -- cgit v0.10.2 From eae033c1b86721ec54511607fc26bfb94a0e004b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 5 Jul 2016 12:17:12 +0300 Subject: net/mlx5: Avoid setting unused var when modifying vport node GUID GCC complains on unused-but-set-variable, clean this up. Fixes: 23898c763f4a ('net/mlx5: E-Switch, Modify node guid on vf set MAC') Signed-off-by: Or Gerlitz Acked-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index daf44cd..91846df 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -513,7 +513,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, { int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in); void *nic_vport_context; - u8 *guid; void *in; int err; @@ -535,8 +534,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev, nic_vport_context = MLX5_ADDR_OF(modify_nic_vport_context_in, in, nic_vport_context); - guid = MLX5_ADDR_OF(nic_vport_context, nic_vport_context, - node_guid); MLX5_SET64(nic_vport_context, nic_vport_context, node_guid, node_guid); err = mlx5_modify_nic_vport_context(mdev, in, inlen); -- cgit v0.10.2 From f5d6516120ee5c777fb7b1ba9d39031881ad511b Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Tue, 5 Jul 2016 18:07:24 +0530 Subject: cxgb4: update latest firmware version supported Change t4fw_version.h to update latest firmware version number Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h index c4b262c..2accab3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h @@ -36,8 +36,8 @@ #define __T4FW_VERSION_H__ #define T4FW_VERSION_MAJOR 0x01 -#define T4FW_VERSION_MINOR 0x0E -#define T4FW_VERSION_MICRO 0x04 +#define T4FW_VERSION_MINOR 0x0F +#define T4FW_VERSION_MICRO 0x25 #define T4FW_VERSION_BUILD 0x00 #define T4FW_MIN_VERSION_MAJOR 0x01 @@ -45,8 +45,8 @@ #define T4FW_MIN_VERSION_MICRO 0x00 #define T5FW_VERSION_MAJOR 0x01 -#define T5FW_VERSION_MINOR 0x0E -#define T5FW_VERSION_MICRO 0x04 +#define T5FW_VERSION_MINOR 0x0F +#define T5FW_VERSION_MICRO 0x25 #define T5FW_VERSION_BUILD 0x00 #define T5FW_MIN_VERSION_MAJOR 0x00 @@ -54,8 +54,8 @@ #define T5FW_MIN_VERSION_MICRO 0x00 #define T6FW_VERSION_MAJOR 0x01 -#define T6FW_VERSION_MINOR 0x0E -#define T6FW_VERSION_MICRO 0x04 +#define T6FW_VERSION_MINOR 0x0F +#define T6FW_VERSION_MICRO 0x25 #define T6FW_VERSION_BUILD 0x00 #define T6FW_MIN_VERSION_MAJOR 0x00 -- cgit v0.10.2 From 262e2bfd7d1e1f1ee48b870e5dfabb87c06b975e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=83=C2=A9mont?= Date: Thu, 30 Jun 2016 17:00:32 +0200 Subject: qla2xxx: Fix NULL pointer deref in QLA interrupt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL pointer dereference when rsp->msix is NULL: [ 5.622457] NULL pointer dereference at 0000000000000050 [ 5.622457] IP: [] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] PGD 0 [ 5.622457] Oops: 0000 [#1] SMP [ 5.622457] Modules linked in: [ 5.622457] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.6.3-x86_64 #1 [ 5.622457] Hardware name: HP ProLiant DL360 G5, BIOS P58 05/02/2011 [ 5.622457] task: ffff8801a88f3740 ti: ffff8801a8954000 task.ti: ffff8801a8954000 [ 5.622457] RIP: 0010:[] [] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP: 0000:ffff8801afb03de8 EFLAGS: 00010002 [ 5.622457] RAX: 0000000000000000 RBX: 0000000000000032 RCX: 00000000ffffffff [ 5.622457] RDX: 0000000000000002 RSI: ffff8801a79bf8c8 RDI: ffff8800c8f7e7c0 [ 5.622457] RBP: ffff8801afb03e68 R08: 0000000000000000 R09: 0000000000000000 [ 5.622457] R10: 00000000ffff8c47 R11: 0000000000000002 R12: ffff8801a79bf8c8 [ 5.622457] R13: ffff8800c8f7e7c0 R14: ffff8800c8f60000 R15: 0000000000018013 [ 5.622457] FS: 0000000000000000(0000) GS:ffff8801afb00000(0000) knlGS:0000000000000000 [ 5.622457] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.622457] CR2: 0000000000000050 CR3: 0000000001e07000 CR4: 00000000000006e0 [ 5.622457] Stack: [ 5.622457] ffff8801afb03e30 ffffffff810c0f2d 0000000000000086 0000000000000002 [ 5.622457] ffff8801afb03e28 ffffffff816570e1 ffff8800c8994628 0000000000000002 [ 5.622457] ffff8801afb03e60 ffffffff816772d4 b47c472ad6955e68 0000000000000032 [ 5.622457] Call Trace: [ 5.622457] [ 5.622457] [] ? __wake_up_common+0x4d/0x80 [ 5.622457] [] ? usb_hcd_resume_root_hub+0x51/0x60 [ 5.622457] [] ? uhci_hub_status_data+0x64/0x240 [ 5.622457] [] qla24xx_intr_handler+0xf0/0x2e0 [ 5.622457] [] ? get_next_timer_interrupt+0xce/0x200 [ 5.622457] [] handle_irq_event_percpu+0x64/0x100 [ 5.622457] [] handle_irq_event+0x27/0x50 [ 5.622457] [] handle_edge_irq+0x65/0x140 [ 5.622457] [] handle_irq+0x18/0x30 [ 5.622457] [] do_IRQ+0x46/0xd0 [ 5.622457] [] common_interrupt+0x7f/0x7f [ 5.622457] [ 5.622457] [] ? mwait_idle+0x68/0x80 [ 5.622457] [] arch_cpu_idle+0xa/0x10 [ 5.622457] [] default_idle_call+0x27/0x30 [ 5.622457] [] cpu_startup_entry+0x19b/0x230 [ 5.622457] [] start_secondary+0x136/0x140 [ 5.622457] Code: 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 c5 00 00 00 48 8b 46 50 49 89 f4 65 8b 15 34 bb aa 7e <39> 50 50 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 60 8b 00 [ 5.622457] RIP [] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP [ 5.622457] CR2: 0000000000000050 [ 5.622457] ---[ end trace fa2b19c25106d42b ]--- [ 5.622457] Kernel panic - not syncing: Fatal exception in interrupt The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde (qla2xxx: Add irq affinity notification). Only dereference rsp->msix when it has been set so the machine can boot fine. Possibly rsp->msix is unset because: [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k. [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000. [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258. [ 3.890145] scsi host0: qla2xxx [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496). [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps). Signed-off-by: Bruno Prémont Acked-by: Quinn Tran CC: # 4.5+ Fixes: cdb898c52d1dfad4b4800b83a58b3fe5d352edde Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5649c20..a92a62d 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2548,7 +2548,7 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, if (!vha->flags.online) return; - if (rsp->msix->cpuid != smp_processor_id()) { + if (rsp->msix && rsp->msix->cpuid != smp_processor_id()) { /* if kernel does not notify qla of IRQ's CPU change, * then set it here. */ -- cgit v0.10.2 From 00699ad8571afd7fb8bc2c61f67c86c2428680ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 5 Jul 2016 09:44:53 -0400 Subject: Use the right predicate in ->atomic_open() instances ->atomic_open() can be given an in-lookup dentry *or* a negative one found in dcache. Use d_in_lookup() to tell one from another, rather than d_unhashed(). Signed-off-by: Al Viro diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index f4645c5..e2e7c74 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -853,7 +853,7 @@ v9fs_vfs_atomic_open(struct inode *dir, struct dentry *dentry, struct p9_fid *fid, *inode_fid; struct dentry *res = NULL; - if (d_unhashed(dentry)) { + if (d_in_lookup(dentry)) { res = v9fs_vfs_lookup(dir, dentry, 0); if (IS_ERR(res)) return PTR_ERR(res); diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c index a34702c..1b51eaa 100644 --- a/fs/9p/vfs_inode_dotl.c +++ b/fs/9p/vfs_inode_dotl.c @@ -254,7 +254,7 @@ v9fs_vfs_atomic_open_dotl(struct inode *dir, struct dentry *dentry, struct posix_acl *pacl = NULL, *dacl = NULL; struct dentry *res = NULL; - if (d_unhashed(dentry)) { + if (d_in_lookup(dentry)) { res = v9fs_vfs_lookup(dir, dentry, 0); if (IS_ERR(res)) return PTR_ERR(res); diff --git a/fs/ceph/file.c b/fs/ceph/file.c index ce2f579..0daaf7c 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -394,7 +394,7 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry, if ((flags & O_CREAT) && !req->r_reply_info.head->is_dentry) err = ceph_handle_notrace_create(dir, dentry); - if (d_unhashed(dentry)) { + if (d_in_lookup(dentry)) { dn = ceph_finish_lookup(req, dentry, err); if (IS_ERR(dn)) err = PTR_ERR(dn); diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index c3eb998..fb0903f 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -445,7 +445,7 @@ cifs_atomic_open(struct inode *inode, struct dentry *direntry, * Check for hashed negative dentry. We have already revalidated * the dentry and it is fine. No need to perform another lookup. */ - if (!d_unhashed(direntry)) + if (!d_in_lookup(direntry)) return -ENOENT; res = cifs_lookup(inode, direntry, 0); diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 264f07c..cca7b04 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -480,7 +480,7 @@ static int fuse_atomic_open(struct inode *dir, struct dentry *entry, struct fuse_conn *fc = get_fuse_conn(dir); struct dentry *res = NULL; - if (d_unhashed(entry)) { + if (d_in_lookup(entry)) { res = fuse_lookup(dir, entry, 0); if (IS_ERR(res)) return PTR_ERR(res); diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 21dc784..9bad79f 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -1189,7 +1189,7 @@ static int gfs2_atomic_open(struct inode *dir, struct dentry *dentry, struct dentry *d; bool excl = !!(flags & O_EXCL); - if (!d_unhashed(dentry)) + if (!d_in_lookup(dentry)) goto skip_lookup; d = __gfs2_lookup(dir, dentry, file, opened); diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index d8015a0..3d5eb5e 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1504,7 +1504,7 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, /* NFS only supports OPEN on regular files */ if ((open_flags & O_DIRECTORY)) { - if (!d_unhashed(dentry)) { + if (!d_in_lookup(dentry)) { /* * Hashed negative dentry with O_DIRECTORY: dentry was * revalidated and is fine, no need to perform lookup -- cgit v0.10.2 From c94c09535c4debcc439f55b5b6d9ebe57bd4665a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 5 Jul 2016 09:49:21 -0400 Subject: nfs_atomic_open(): prevent parallel nfs_lookup() on a negative hashed Signed-off-by: Al Viro diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 3d5eb5e..19d93d0 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1485,11 +1485,13 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, struct file *file, unsigned open_flags, umode_t mode, int *opened) { + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq); struct nfs_open_context *ctx; struct dentry *res; struct iattr attr = { .ia_valid = ATTR_OPEN }; struct inode *inode; unsigned int lookup_flags = 0; + bool switched = false; int err; /* Expect a negative dentry */ @@ -1528,6 +1530,17 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, attr.ia_size = 0; } + if (!(open_flags & O_CREAT) && !d_in_lookup(dentry)) { + d_drop(dentry); + switched = true; + dentry = d_alloc_parallel(dentry->d_parent, + &dentry->d_name, &wq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + if (unlikely(!d_in_lookup(dentry))) + return finish_no_open(file, dentry); + } + ctx = create_nfs_open_context(dentry, open_flags); err = PTR_ERR(ctx); if (IS_ERR(ctx)) @@ -1563,14 +1576,23 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry, trace_nfs_atomic_open_exit(dir, ctx, open_flags, err); put_nfs_open_context(ctx); out: + if (unlikely(switched)) { + d_lookup_done(dentry); + dput(dentry); + } return err; no_open: res = nfs_lookup(dir, dentry, lookup_flags); - err = PTR_ERR(res); + if (switched) { + d_lookup_done(dentry); + if (!res) + res = dentry; + else + dput(dentry); + } if (IS_ERR(res)) - goto out; - + return PTR_ERR(res); return finish_no_open(file, res); } EXPORT_SYMBOL_GPL(nfs_atomic_open); -- cgit v0.10.2 From 45209046c47b93fadf26dc59a9da724f387b9cf2 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 5 Jul 2016 13:53:12 +0800 Subject: ACPICA: Namespace: Fix namespace/interpreter lock ordering There is a lock order issue in acpi_load_tables(). The namespace lock is held before holding the interpreter lock. With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the log during boot: [ 0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263) [ 0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95) [ 0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326) [ 0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133) The issue has been introduced by the following commit: Commit: 2f38b1b16d9280689e5cfa47a4c50956bf437f0d ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e Subject: ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading Which fixed a deadlock issue for acpi_ns_load_table() in acpi_ex_add_table() but didn't take care of the lock order in acpi_ns_load_table() correctly. Originally (before the above commit), ACPICA used the namespace/interpreter locks in the following 2 key code paths: 1. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) 2. Object evaluation: acpi_ns_evaluate L(Interpreter) acpi_ps_execute_method U(Interpreter) acpi_ns_load_table L(Namespace) U(Namespace) acpi_ev_initialize_region L(Namespace) U(Namespace) address_space.setup L(Namespace) U(Namespace) address_space.handler L(Namespace) U(Namespace) acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep L(Interpreter) U(Interpreter) During runtime, while acpi_ns_evaluate is called, the lock order is always Interpreter -> Namespace. In turn, the problematic commit acquires the locks in the following order: 3. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table L(Interpreter) acpi_ns_one_complete_parse U(Interpreter) U(Namespace) To fix the lock order issue, move the interpreter lock to acpi_ns_load_table() to ensure the lock order correctness: 4. Table loading: acpi_ns_load_table L(Interpreter) L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) U(Interpreter) However, this doesn't fix the current design issues related to the namespace lock. For example, we can notice that in acpi_ns_evaluate(), outside of acpi_ns_load_table(), the namespace objects may be created by the named object creation control methods. And the creation of the method-owned namespace objects are not locked by the namespace lock. This patch doesn't try to fix such kind of existing issues. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading) Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index b5e2b0a..297f6aa 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -46,6 +46,7 @@ #include "acnamesp.h" #include "acdispat.h" #include "actables.h" +#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsload") @@ -78,6 +79,8 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) ACPI_FUNCTION_TRACE(ns_load_table); + acpi_ex_enter_interpreter(); + /* * Parse the table and load the namespace with all named * objects found within. Control methods are NOT parsed @@ -89,7 +92,7 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) */ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto unlock_interp; } /* If table already loaded into namespace, just return */ @@ -130,6 +133,8 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) unlock: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); +unlock_interp: + (void)acpi_ex_exit_interpreter(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index 1783cd7..f631a47 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -47,7 +47,6 @@ #include "acparser.h" #include "acdispat.h" #include "actables.h" -#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsparse") @@ -171,8 +170,6 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) ACPI_FUNCTION_TRACE(ns_parse_table); - acpi_ex_enter_interpreter(); - /* * AML Parse, pass 1 * @@ -188,7 +185,7 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, start_node); if (ACPI_FAILURE(status)) { - goto error_exit; + return_ACPI_STATUS(status); } /* @@ -204,10 +201,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, start_node); if (ACPI_FAILURE(status)) { - goto error_exit; + return_ACPI_STATUS(status); } -error_exit: - acpi_ex_exit_interpreter(); return_ACPI_STATUS(status); } -- cgit v0.10.2 From 217215041b9285af2193a755b56a8f3ed408bfe2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 6 Jul 2016 06:50:36 +1000 Subject: drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern Fixes a regression caused by a stupid thinko from "disp/sor/gf119: both links use the same training register". Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c index 22706c0..49bd5da 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c @@ -40,7 +40,8 @@ static int gf119_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern) { struct nvkm_device *device = outp->base.disp->engine.subdev.device; - nvkm_mask(device, 0x61c110, 0x0f0f0f0f, 0x01010101 * pattern); + const u32 soff = gf119_sor_soff(outp); + nvkm_mask(device, 0x61c110 + soff, 0x0f0f0f0f, 0x01010101 * pattern); return 0; } -- cgit v0.10.2 From 096cdc6f52225835ff503f987a0d68ef770bb78e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Jun 2016 16:58:46 +0300 Subject: platform/chrome: cros_ec_dev - double fetch bug in ioctl We verify "u_cmd.outsize" and "u_cmd.insize" but we need to make sure that those values have not changed between the two copy_from_user() calls. Otherwise it could lead to a buffer overflow. Additionally, cros_ec_cmd_xfer() can set s_cmd->insize to a lower value. We should use the new smaller value so we don't copy too much data to the user. Reported-by: Pengfei Wang Fixes: a841178445bb ('mfd: cros_ec: Use a zero-length array for command data') Signed-off-by: Dan Carpenter Reviewed-by: Kees Cook Tested-by: Gwendal Grignou Cc: # v4.2+ Signed-off-by: Olof Johansson diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c index 6d8ee3b..8abd80d 100644 --- a/drivers/platform/chrome/cros_ec_dev.c +++ b/drivers/platform/chrome/cros_ec_dev.c @@ -151,13 +151,19 @@ static long ec_device_ioctl_xcmd(struct cros_ec_dev *ec, void __user *arg) goto exit; } + if (u_cmd.outsize != s_cmd->outsize || + u_cmd.insize != s_cmd->insize) { + ret = -EINVAL; + goto exit; + } + s_cmd->command += ec->cmd_offset; ret = cros_ec_cmd_xfer(ec->ec_dev, s_cmd); /* Only copy data to userland if data was received. */ if (ret < 0) goto exit; - if (copy_to_user(arg, s_cmd, sizeof(*s_cmd) + u_cmd.insize)) + if (copy_to_user(arg, s_cmd, sizeof(*s_cmd) + s_cmd->insize)) ret = -EFAULT; exit: kfree(s_cmd); -- cgit v0.10.2 From 7e3fd813717693597daaa95dee875f4cb2d911ef Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Tue, 5 Jul 2016 19:18:07 +0800 Subject: ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removal The FIFO unlocking mechanism in acpi_dbg has been broken by the following commit: Commit: 287980e49ffc0f6d911601e7e352a812ed27768e Subject: remove lots of IS_ERR_VALUE abuses It converted !IS_ERR_VALUE(ret) into !ret which was not entirely correct. Fix the regression by taking ret > 0 into account too as appropriate. Fixes: 287980e49ffc (remove lots of IS_ERR_VALUE abuses) Signed-off-by: Lv Zheng [ rjw: Simplifications, changelog & subject massage ] Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpi_dbg.c b/drivers/acpi/acpi_dbg.c index 1f41284..dee8692 100644 --- a/drivers/acpi/acpi_dbg.c +++ b/drivers/acpi/acpi_dbg.c @@ -602,7 +602,7 @@ static int acpi_aml_read_user(char __user *buf, int len) crc->tail = (crc->tail + n) & (ACPI_AML_BUF_SIZE - 1); ret = n; out: - acpi_aml_unlock_fifo(ACPI_AML_OUT_USER, !ret); + acpi_aml_unlock_fifo(ACPI_AML_OUT_USER, ret >= 0); return ret; } @@ -672,7 +672,7 @@ static int acpi_aml_write_user(const char __user *buf, int len) crc->head = (crc->head + n) & (ACPI_AML_BUF_SIZE - 1); ret = n; out: - acpi_aml_unlock_fifo(ACPI_AML_IN_USER, !ret); + acpi_aml_unlock_fifo(ACPI_AML_IN_USER, ret >= 0); return n; } -- cgit v0.10.2 From ab58298cf459fcd4f588a401d36abf0bd2215b51 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 5 Jul 2016 21:12:53 +0200 Subject: net: fix decnet rtnexthop parsing dn_fib_count_nhs() could enter an infinite loop if nhp->rtnh_len == 0 (i.e. if userspace passes a malformed netlink message). Let's use the helpers from net/nexthop.h which take care of all this stuff. We can do exactly the same as e.g. fib_count_nexthops() and fib_get_nhs() from net/ipv4/fib_semantics.c. This fixes the softlockup for me. Cc: Thomas Graf Signed-off-by: Vegard Nossum Signed-off-by: David S. Miller diff --git a/net/decnet/dn_fib.c b/net/decnet/dn_fib.c index df48034..a796fc7 100644 --- a/net/decnet/dn_fib.c +++ b/net/decnet/dn_fib.c @@ -41,6 +41,7 @@ #include #include #include +#include #define RT_MIN_TABLE 1 @@ -150,14 +151,13 @@ static int dn_fib_count_nhs(const struct nlattr *attr) struct rtnexthop *nhp = nla_data(attr); int nhs = 0, nhlen = nla_len(attr); - while(nhlen >= (int)sizeof(struct rtnexthop)) { - if ((nhlen -= nhp->rtnh_len) < 0) - return 0; + while (rtnh_ok(nhp, nhlen)) { nhs++; - nhp = RTNH_NEXT(nhp); + nhp = rtnh_next(nhp, &nhlen); } - return nhs; + /* leftover implies invalid nexthop configuration, discard it */ + return nhlen > 0 ? 0 : nhs; } static int dn_fib_get_nhs(struct dn_fib_info *fi, const struct nlattr *attr, @@ -167,21 +167,24 @@ static int dn_fib_get_nhs(struct dn_fib_info *fi, const struct nlattr *attr, int nhlen = nla_len(attr); change_nexthops(fi) { - int attrlen = nhlen - sizeof(struct rtnexthop); - if (attrlen < 0 || (nhlen -= nhp->rtnh_len) < 0) + int attrlen; + + if (!rtnh_ok(nhp, nhlen)) return -EINVAL; nh->nh_flags = (r->rtm_flags&~0xFF) | nhp->rtnh_flags; nh->nh_oif = nhp->rtnh_ifindex; nh->nh_weight = nhp->rtnh_hops + 1; - if (attrlen) { + attrlen = rtnh_attrlen(nhp); + if (attrlen > 0) { struct nlattr *gw_attr; gw_attr = nla_find((struct nlattr *) (nhp + 1), attrlen, RTA_GATEWAY); nh->nh_gw = gw_attr ? nla_get_le16(gw_attr) : 0; } - nhp = RTNH_NEXT(nhp); + + nhp = rtnh_next(nhp, &nhlen); } endfor_nexthops(fi); return 0; -- cgit v0.10.2 From 903ce4abdf374e3365d93bcb3df56c62008835ba Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 5 Jul 2016 12:10:23 -0700 Subject: ipv6: Fix mem leak in rt6i_pcpu It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy Tested-by: Petr Novopashenniy Acked-by: Hannes Frederic Sowa Cc: Hannes Frederic Sowa Cc: Petr Novopashenniy Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 1bcef23..771be1f 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -177,6 +177,7 @@ static void rt6_free_pcpu(struct rt6_info *non_pcpu_rt) } } + free_percpu(non_pcpu_rt->rt6i_pcpu); non_pcpu_rt->rt6i_pcpu = NULL; } -- cgit v0.10.2 From 175a20c16fdb7700fcac63f1eeb2caa7e1dddd2d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 23 Jun 2016 18:06:49 +0300 Subject: x86/perf/intel/rapl: Fix module name collision with powercap intel-rapl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 4b6e2571bf00 the rapl perf module calls itself intel-rapl. That name was already in use by the rapl powercap driver, which now fails to load if the perf module is loaded. Fix the problem by renaming the perf module to intel-rapl-perf, so that both modules can coexist. Fixes: 4b6e2571bf00 ("x86/perf/intel/rapl: Make the Intel RAPL PMU driver modular") Signed-off-by: Ville Syrjälä Cc: Vince Weaver Cc: Alexander Shishkin Cc: Kan Liang Cc: Stephane Eranian Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1466694409-3620-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Thomas Gleixner diff --git a/arch/x86/events/intel/Makefile b/arch/x86/events/intel/Makefile index 3660b2c..06c2baa 100644 --- a/arch/x86/events/intel/Makefile +++ b/arch/x86/events/intel/Makefile @@ -1,8 +1,8 @@ obj-$(CONFIG_CPU_SUP_INTEL) += core.o bts.o cqm.o obj-$(CONFIG_CPU_SUP_INTEL) += ds.o knc.o obj-$(CONFIG_CPU_SUP_INTEL) += lbr.o p4.o p6.o pt.o -obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL) += intel-rapl.o -intel-rapl-objs := rapl.o +obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL) += intel-rapl-perf.o +intel-rapl-perf-objs := rapl.o obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE) += intel-uncore.o intel-uncore-objs := uncore.o uncore_nhmex.o uncore_snb.o uncore_snbep.o obj-$(CONFIG_PERF_EVENTS_INTEL_CSTATE) += intel-cstate.o -- cgit v0.10.2 From 6e8ef842223b90a33efd570128bb566a9ae6f5ad Mon Sep 17 00:00:00 2001 From: Purushottam Kushwaha Date: Tue, 5 Jul 2016 13:44:51 +0530 Subject: nl80211: Move ACL parsing later to avoid a possible memory leak No support for pbss results in a memory leak for the acl_data (if parse_acl_data succeeds). Fix this by moving the ACL parsing later. Cc: stable@vger.kernel.org Fixes: 34d505193bd10 ("cfg80211: basic support for PBSS network type") Signed-off-by: Purushottam Kushwaha Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d759901..7d72283 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3487,16 +3487,16 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) params.smps_mode = NL80211_SMPS_OFF; } + params.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]); + if (params.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ]) + return -EOPNOTSUPP; + if (info->attrs[NL80211_ATTR_ACL_POLICY]) { params.acl = parse_acl_data(&rdev->wiphy, info); if (IS_ERR(params.acl)) return PTR_ERR(params.acl); } - params.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]); - if (params.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ]) - return -EOPNOTSUPP; - wdev_lock(wdev); err = rdev_start_ap(rdev, dev, ¶ms); if (!err) { -- cgit v0.10.2 From 16a910a6722b7a8680409e634c7c0dac073c01e4 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Tue, 5 Jul 2016 15:23:10 +0300 Subject: cfg80211: handle failed skb allocation Handle the case when dev_alloc_skb returns NULL. Cc: stable@vger.kernel.org Fixes: 2b67f944f88c2 ("cfg80211: reuse existing page fragments in A-MSDU rx") Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index 2443ee3..b7d1592 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -721,6 +721,8 @@ __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, * alignment since sizeof(struct ethhdr) is 14. */ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len); + if (!frame) + return NULL; skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len); -- cgit v0.10.2 From 88d02a2ba6c52350f9a73ff1b01a5be839c3ca17 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 16 Jun 2016 15:50:31 -0700 Subject: MIPS: Fix page table corruption on THP permission changes. When the core THP code is modifying the permissions of a huge page it calls pmd_modify(), which unfortunately was clearing the _PAGE_HUGE bit of the page table entry. The result can be kernel messages like: mm/memory.c:397: bad pmd 000000040080004d. mm/memory.c:397: bad pmd 00000003ff00004d. mm/memory.c:397: bad pmd 000000040100004d. or: ------------[ cut here ]------------ WARNING: at mm/mmap.c:3200 exit_mmap+0x150/0x158() Modules linked in: ipv6 at24 octeon3_ethernet octeon_srio_nexus m25p80 CPU: 12 PID: 1295 Comm: pmderr Not tainted 3.10.87-rt80-Cavium-Octeon #4 Stack : 0000000040808000 0000000014009ce1 0000000000400004 ffffffff81076ba0 0000000000000000 0000000000000000 ffffffff85110000 0000000000000119 0000000000000004 0000000000000000 0000000000000119 43617669756d2d4f 0000000000000000 ffffffff850fda40 ffffffff85110000 0000000000000000 0000000000000000 0000000000000009 ffffffff809207a0 0000000000000c80 ffffffff80f1bf20 0000000000000001 000000ffeca36828 0000000000000001 0000000000000000 0000000000000001 000000ffeca7e700 ffffffff80886924 80000003fd7a0000 80000003fd7a39b0 80000003fdea8000 ffffffff80885780 80000003fdea8000 ffffffff80f12218 000000000000000c 000000000000050f 0000000000000000 ffffffff80865c4c 0000000000000000 0000000000000000 ... Call Trace: [] show_stack+0x6c/0xf8 [] warn_slowpath_common+0x78/0xa8 [] exit_mmap+0x150/0x158 [] mmput+0x5c/0x110 [] do_exit+0x230/0xa68 [] do_group_exit+0x54/0x1d0 [] __wake_up_parent+0x0/0x18 ---[ end trace c7b38293191c57dc ]--- BUG: Bad rss-counter state mm:80000003fa168000 idx:1 val:1536 Fix by not clearing _PAGE_HUGE bit. Signed-off-by: David Daney Tested-by: Aaro Koskinen Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13687/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index f538167..7d44e88 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -633,7 +633,7 @@ static inline struct page *pmd_page(pmd_t pmd) static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { - pmd_val(pmd) = (pmd_val(pmd) & _PAGE_CHG_MASK) | + pmd_val(pmd) = (pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HUGE)) | (pgprot_val(newprot) & ~_PAGE_CHG_MASK); return pmd; } -- cgit v0.10.2 From d1fe176ca51fa3cb35f70c1d876d9a090e9befce Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Jun 2016 10:43:19 +0200 Subject: batman-adv: Fix speedy join in gateway client mode Speedy join only works when the received packet is either broadcast or an 4addr unicast packet. Thus packets converted from broadcast to unicast via the gateway handling code have to be converted to 4addr packets to allow the receiving gateway server to add the sender address as temporary entry to the translation table. Not doing it will make the batman-adv gateway server drop the DHCP response in many situations because it doesn't yet have the TT entry for the destination of the DHCP response. Fixes: 371351731e9c ("batman-adv: change interface_rx to get orig node") Signed-off-by: Sven Eckelmann Acked-by: Antonio Quartulli Signed-off-by: Marek Lindner Signed-off-by: Simon Wunderlich diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index f2f1256..0103976 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -424,8 +424,8 @@ int batadv_send_skb_via_gw(struct batadv_priv *bat_priv, struct sk_buff *skb, struct batadv_orig_node *orig_node; orig_node = batadv_gw_get_selected_orig(bat_priv); - return batadv_send_skb_unicast(bat_priv, skb, BATADV_UNICAST, 0, - orig_node, vid); + return batadv_send_skb_unicast(bat_priv, skb, BATADV_UNICAST_4ADDR, + BATADV_P_DATA, orig_node, vid); } void batadv_schedule_bat_ogm(struct batadv_hard_iface *hard_iface) -- cgit v0.10.2 From 522e5cb76d0663c88f96b6a8301451c8efa37207 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 1 Jul 2016 16:42:55 +0200 Subject: iommu/amd: Fix unity mapping initialization race There is a race condition in the AMD IOMMU init code that causes requested unity mappings to be blocked by the IOMMU for a short period of time. This results on boot failures and IO_PAGE_FAULTs on some machines. Fix this by making sure the unity mappings are installed before all other DMA is blocked. Fixes: aafd8ba0ca74 ('iommu/amd: Implement add_device and remove_device') Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index d091def..59741ea 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1568,13 +1568,23 @@ static int __init amd_iommu_init_pci(void) break; } + /* + * Order is important here to make sure any unity map requirements are + * fulfilled. The unity mappings are created and written to the device + * table during the amd_iommu_init_api() call. + * + * After that we call init_device_table_dma() to make sure any + * uninitialized DTE will block DMA, and in the end we flush the caches + * of all IOMMUs to make sure the changes to the device table are + * active. + */ + ret = amd_iommu_init_api(); + init_device_table_dma(); for_each_iommu(iommu) iommu_flush_all_caches(iommu); - ret = amd_iommu_init_api(); - if (!ret) print_iommu_info(); -- cgit v0.10.2 From 095d28c62f9a05edc186e1b2b02bc44585402bdd Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Wed, 6 Jul 2016 09:31:35 +0800 Subject: drm/amd/powerplay: fix incorrect voltage table value for polaris10 Signed-off-by: Huang Rui Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index ec2a7ad..5785dc2 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -733,7 +733,7 @@ static int polaris10_populate_smc_mvdd_table(struct pp_hwmgr *hwmgr, table->Smio[level] |= data->mvdd_voltage_table.entries[level].smio_low; } - table->SmioMask2 = data->vddci_voltage_table.mask_low; + table->SmioMask2 = data->mvdd_voltage_table.mask_low; table->MvddLevelCount = (uint32_t) PP_HOST_TO_SMC_UL(count); } -- cgit v0.10.2 From 1dfefee8939b07dd65a35bb78f6a06df85578301 Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Wed, 6 Jul 2016 09:32:24 +0800 Subject: drm/amd/powerplay: fix incorrect voltage table value for tonga Signed-off-by: Huang Rui Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c index 233eb7f..5d0f655 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c @@ -1302,7 +1302,7 @@ static int tonga_populate_smc_mvdd_table(struct pp_hwmgr *hwmgr, table->Smio[count] |= data->mvdd_voltage_table.entries[count].smio_low; } - table->SmioMask2 = data->vddci_voltage_table.mask_low; + table->SmioMask2 = data->mvdd_voltage_table.mask_low; CONVERT_FROM_HOST_TO_SMC_UL(table->MvddLevelCount); } -- cgit v0.10.2 From 4b2427605e5325eafb5cfc2698f517db68e41075 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 5 Jul 2016 13:11:47 +0800 Subject: drm/amd/powerplay: incorrectly use of the function return value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit '0' means true. Signed-off-by: Rex Zhu Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c index 671fdb4..dccc859 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_processpptables.c @@ -302,7 +302,7 @@ static int init_dpm_2_parameters( (((unsigned long)powerplay_table) + le16_to_cpu(powerplay_table->usPPMTableOffset)); if (0 != powerplay_table->usPPMTableOffset) { - if (1 == get_platform_power_management_table(hwmgr, atom_ppm_table)) { + if (get_platform_power_management_table(hwmgr, atom_ppm_table) == 0) { phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_EnablePlatformPowerManagement); } -- cgit v0.10.2 From e5eb37170b3cbbf948c6aeaccece818a59e76a6c Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 29 Jun 2016 16:37:35 +0800 Subject: drm/amd/powerplay: fix bug that get wrong polaris evv voltage. value is 32 bits for polaris, not 16. Signed-off-by: Rex Zhu Reviewed-by: Ken Wang Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index 5785dc2..b8209ca 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -2685,7 +2685,7 @@ static int polaris10_get_evv_voltages(struct pp_hwmgr *hwmgr) { struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend); uint16_t vv_id; - uint16_t vddc = 0; + uint32_t vddc = 0; uint16_t i, j; uint32_t sclk = 0; struct phm_ppt_v1_information *table_info = @@ -2716,8 +2716,9 @@ static int polaris10_get_evv_voltages(struct pp_hwmgr *hwmgr) continue); - /* need to make sure vddc is less than 2v or else, it could burn the ASIC. */ - PP_ASSERT_WITH_CODE((vddc < 2000 && vddc != 0), + /* need to make sure vddc is less than 2v or else, it could burn the ASIC. + * real voltage level in unit of 0.01mv */ + PP_ASSERT_WITH_CODE((vddc < 200000 && vddc != 0), "Invalid VDDC value", result = -EINVAL;); /* the voltage should not be zero nor equal to leakage ID */ diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index bf4e18f..90b35c5 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1256,7 +1256,7 @@ int atomctrl_set_ac_timing_ai(struct pp_hwmgr *hwmgr, uint32_t memory_clock, } int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_type, - uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage) + uint32_t sclk, uint16_t virtual_voltage_Id, uint32_t *voltage) { int result; @@ -1274,7 +1274,7 @@ int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_ if (0 != result) return result; - *voltage = get_voltage_info_param_space.usVoltageLevel; + *voltage = ((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *)(&get_voltage_info_param_space))->ulVoltageLevel; return result; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h index 248c5db..1e35a96 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.h @@ -305,7 +305,7 @@ extern int atomctrl_get_engine_pll_dividers_ai(struct pp_hwmgr *hwmgr, uint32_t extern int atomctrl_set_ac_timing_ai(struct pp_hwmgr *hwmgr, uint32_t memory_clock, uint8_t level); extern int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_type, - uint32_t sclk, uint16_t virtual_voltage_Id, uint16_t *voltage); + uint32_t sclk, uint16_t virtual_voltage_Id, uint32_t *voltage); extern int atomctrl_get_smc_sclk_range_table(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl_sclk_range_table *table); extern int atomctrl_get_avfs_information(struct pp_hwmgr *hwmgr, struct pp_atom_ctrl__avfs_parameters *param); -- cgit v0.10.2 From ab6bad05c886cf0ef0c86bd1f665cdbe8e5e75e7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 28 Jun 2016 16:55:52 -0400 Subject: drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation. As get the right evv voltage, update them to latest coefficients to align with BB. agd: squash in Slava's 32 bit build fix Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c index b8209ca..91e25f9 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c @@ -98,7 +98,6 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) -#define CEILING_UCHAR(double) ((double-(uint8_t)(double)) > 0 ? (uint8_t)(double+1) : (uint8_t)(double)) static const uint16_t polaris10_clock_stretcher_lookup_table[2][4] = { {600, 1050, 3, 0}, {600, 1050, 6, 1} }; @@ -1807,27 +1806,25 @@ static int polaris10_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr) ro = efuse * (max -min)/255 + min; - /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset - * there is a little difference in calculating - * volt_with_cks with windows */ + /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */ for (i = 0; i < sclk_table->count; i++) { data->smc_state_table.Sclk_CKS_masterEn0_7 |= sclk_table->entries[i].cks_enable << i; if (hwmgr->chip_id == CHIP_POLARIS10) { - volt_without_cks = (uint32_t)((2753594000 + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \ + volt_without_cks = (uint32_t)((2753594000U + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \ (2424180 - (sclk_table->entries[i].clk/100) * 1132925/1000)); - volt_with_cks = (uint32_t)((279720200 + sclk_table->entries[i].clk * 3232 - (ro - 65) * 100000000) / \ - (252248000 - sclk_table->entries[i].clk/100 * 115764)); + volt_with_cks = (uint32_t)((2797202000U + sclk_table->entries[i].clk/100 * 3232 - (ro - 65) * 1000000) / \ + (2522480 - sclk_table->entries[i].clk/100 * 115764/100)); } else { - volt_without_cks = (uint32_t)((2416794800 + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \ - (2625416 - (sclk_table->entries[i].clk/100) * 12586807/10000)); - volt_with_cks = (uint32_t)((2999656000 + sclk_table->entries[i].clk * 392803/100 - (ro - 44) * 1000000) / \ - (3422454 - sclk_table->entries[i].clk/100 * 18886376/10000)); + volt_without_cks = (uint32_t)((2416794800U + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \ + (2625416 - (sclk_table->entries[i].clk/100) * (12586807/10000))); + volt_with_cks = (uint32_t)((2999656000U - sclk_table->entries[i].clk/100 * 392803 - (ro - 44) * 1000000) / \ + (3422454 - sclk_table->entries[i].clk/100 * (18886376/10000))); } if (volt_without_cks >= volt_with_cks) - volt_offset = (uint8_t)CEILING_UCHAR((volt_without_cks - volt_with_cks + - sclk_table->entries[i].cks_voffset) * 100 / 625); + volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks + + sclk_table->entries[i].cks_voffset) * 100 + 624) / 625); data->smc_state_table.Sclk_voltageOffset[i] = volt_offset; } -- cgit v0.10.2 From 076501ff6ba265a473689c112eda9f1f34f620b5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Jul 2016 16:06:53 -0700 Subject: init/Kconfig: keep Expert users menu together The "expert" menu was broken (split) such that all entries in it after KALLSYMS were displayed in the "General setup" area instead of in the "Expert users" area. Fix this by adding one kconfig dependency. Yes, the Expert users menu is fragile. Problems like this have happened several times in the past. I will attempt to isolate the Expert users menu if there is interest in that. Fixes: 4d5d5664c900 ("x86: kallsyms: disable absolute percpu symbols on !SMP") Signed-off-by: Randy Dunlap Cc: Ard Biesheuvel Cc: stable@vger.kernel.org # 4.6 Signed-off-by: Linus Torvalds diff --git a/init/Kconfig b/init/Kconfig index f755a60..c02d897 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1458,6 +1458,7 @@ config KALLSYMS_ALL config KALLSYMS_ABSOLUTE_PERCPU bool + depends on KALLSYMS default X86_64 && SMP config KALLSYMS_BASE_RELATIVE -- cgit v0.10.2 From 5eb495349f5ec3b134f7341a2450392fc86d99d0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 30 Jun 2016 17:32:08 +0200 Subject: ARM: tegra: beaver: Allow SD card voltage to be changed This allows to switch the card signal voltage level to 1.8 V, which is needed for any ultra high speed modes to work. Signed-off-by: Lucas Stach Acked-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 1eca3b2..b6da15d 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1843,7 +1843,7 @@ ldo5_reg: ldo5 { regulator-name = "vddio_sdmmc,avdd_vdac"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -1914,6 +1914,7 @@ sdhci@78000000 { status = "okay"; + vqmmc-supply = <&ldo5_reg>; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; -- cgit v0.10.2 From 2c81a6477081966fe80b8c6daa68459bca896774 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 14 Jun 2016 16:10:41 +0100 Subject: perf/core: Fix pmu::filter_match for SW-led groups The following commit: 66eb579e66ec ("perf: allow for PMU-specific event filtering") added the pmu::filter_match() callback. This was intended to avoid HW constraints on events from resulting in extremely pessimistic scheduling. However, pmu::filter_match() is only called for the leader of each event group. When the leader is a SW event, we do not filter the groups, and may fail at pmu::add() time, and when this happens we'll give up on scheduling any event groups later in the list until they are rotated ahead of the failing group. This can result in extremely sub-optimal event scheduling behaviour, e.g. if running the following on a big.LITTLE platform: $ taskset -c 0 ./perf stat \ -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \ -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \ ls context-switches (0.00%) armv8_cortex_a57/config=0x11/ (0.00%) 24 context-switches (37.36%) 57589154 armv8_cortex_a53/config=0x11/ (37.36%) Here the 'a53' event group was always eligible to be scheduled, but the 'a57' group never eligible to be scheduled, as the task was always affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57' group was eligible, but the HW event failed at pmu::add() time, resulting in ctx_flexible_sched_in giving up on scheduling further groups with HW events. One way of avoiding this is to check pmu::filter_match() on siblings as well as the group leader. If any of these fail their pmu::filter_match() call, we must skip the entire group before attempting to add any events. Signed-off-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Fixes: 66eb579e66ec ("perf: allow for PMU-specific event filtering") Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com [ Small readability edits. ] Signed-off-by: Ingo Molnar diff --git a/kernel/events/core.c b/kernel/events/core.c index 85cd418..43d43a2d 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -1678,12 +1678,33 @@ static bool is_orphaned_event(struct perf_event *event) return event->state == PERF_EVENT_STATE_DEAD; } -static inline int pmu_filter_match(struct perf_event *event) +static inline int __pmu_filter_match(struct perf_event *event) { struct pmu *pmu = event->pmu; return pmu->filter_match ? pmu->filter_match(event) : 1; } +/* + * Check whether we should attempt to schedule an event group based on + * PMU-specific filtering. An event group can consist of HW and SW events, + * potentially with a SW leader, so we must check all the filters, to + * determine whether a group is schedulable: + */ +static inline int pmu_filter_match(struct perf_event *event) +{ + struct perf_event *child; + + if (!__pmu_filter_match(event)) + return 0; + + list_for_each_entry(child, &event->sibling_list, group_entry) { + if (!__pmu_filter_match(child)) + return 0; + } + + return 1; +} + static inline int event_filter_match(struct perf_event *event) { -- cgit v0.10.2 From 0beef634b86a1350c31da5fcc2992f0d7c8a622b Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 7 Jul 2016 01:23:57 -0600 Subject: xenbus: don't BUG() on user mode induced condition Inability to locate a user mode specified transaction ID should not lead to a kernel crash. For other than XS_TRANSACTION_START also don't issue anything to xenbus if the specified ID doesn't match that of any active transaction. Signed-off-by: Jan Beulich Cc: Signed-off-by: David Vrabel diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index cacf30d..7487971 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -316,11 +316,18 @@ static int xenbus_write_transaction(unsigned msg_type, rc = -ENOMEM; goto out; } + } else { + list_for_each_entry(trans, &u->transactions, list) + if (trans->handle.id == u->u.msg.tx_id) + break; + if (&trans->list == &u->transactions) + return -ESRCH; } reply = xenbus_dev_request_and_reply(&u->u.msg); if (IS_ERR(reply)) { - kfree(trans); + if (msg_type == XS_TRANSACTION_START) + kfree(trans); rc = PTR_ERR(reply); goto out; } @@ -333,12 +340,7 @@ static int xenbus_write_transaction(unsigned msg_type, list_add(&trans->list, &u->transactions); } } else if (u->u.msg.type == XS_TRANSACTION_END) { - list_for_each_entry(trans, &u->transactions, list) - if (trans->handle.id == u->u.msg.tx_id) - break; - BUG_ON(&trans->list == &u->transactions); list_del(&trans->list); - kfree(trans); } -- cgit v0.10.2 From e19a6ee2460bdd0d0055a6029383422773f9999a Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 20 Jun 2016 18:28:01 +0100 Subject: arm64: kernel: Save and restore UAO and addr_limit on exception entry If we take an exception while at EL1, the exception handler inherits the original context's addr_limit and PSTATE.UAO values. To be consistent always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This prevents accidental re-use of the original context's addr_limit. Based on a similar patch for arm from Russell King. Cc: # 4.6- Acked-by: Will Deacon Reviewed-by: Mark Rutland Signed-off-by: James Morse Signed-off-by: Will Deacon diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index a307eb6..7f94755 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -117,6 +117,8 @@ struct pt_regs { }; u64 orig_x0; u64 syscallno; + u64 orig_addr_limit; + u64 unused; // maintain 16 byte alignment }; #define arch_has_single_step() (1) diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index f8e5d47..2f4ba77 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -60,6 +60,7 @@ int main(void) DEFINE(S_PC, offsetof(struct pt_regs, pc)); DEFINE(S_ORIG_X0, offsetof(struct pt_regs, orig_x0)); DEFINE(S_SYSCALLNO, offsetof(struct pt_regs, syscallno)); + DEFINE(S_ORIG_ADDR_LIMIT, offsetof(struct pt_regs, orig_addr_limit)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter)); diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 12e8d2b..6c3b734 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -97,7 +98,14 @@ mov x29, xzr // fp pointed to user-space .else add x21, sp, #S_FRAME_SIZE - .endif + get_thread_info tsk + /* Save the task's original addr_limit and set USER_DS (TASK_SIZE_64) */ + ldr x20, [tsk, #TI_ADDR_LIMIT] + str x20, [sp, #S_ORIG_ADDR_LIMIT] + mov x20, #TASK_SIZE_64 + str x20, [tsk, #TI_ADDR_LIMIT] + ALTERNATIVE(nop, SET_PSTATE_UAO(0), ARM64_HAS_UAO, CONFIG_ARM64_UAO) + .endif /* \el == 0 */ mrs x22, elr_el1 mrs x23, spsr_el1 stp lr, x21, [sp, #S_LR] @@ -128,6 +136,14 @@ .endm .macro kernel_exit, el + .if \el != 0 + /* Restore the task's original addr_limit. */ + ldr x20, [sp, #S_ORIG_ADDR_LIMIT] + str x20, [tsk, #TI_ADDR_LIMIT] + + /* No need to restore UAO, it will be restored from SPSR_EL1 */ + .endif + ldp x21, x22, [sp, #S_PC] // load ELR, SPSR .if \el == 0 ct_user_enter @@ -406,7 +422,6 @@ el1_irq: bl trace_hardirqs_off #endif - get_thread_info tsk irq_handler #ifdef CONFIG_PREEMPT diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 013e2cb..b1166d1 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -280,7 +280,8 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, } if (permission_fault(esr) && (addr < USER_DS)) { - if (get_fs() == KERNEL_DS) + /* regs->orig_addr_limit may be 0 if we entered from EL0 */ + if (regs->orig_addr_limit == KERNEL_DS) die("Accessing user space memory with fs=KERNEL_DS", regs, esr); if (!search_exception_tables(regs->pc)) -- cgit v0.10.2 From 47c459beabe969c6751e2ea8d1f85c5fa1652d6c Mon Sep 17 00:00:00 2001 From: Ganapatrao Kulkarni Date: Thu, 7 Jul 2016 10:18:17 +0530 Subject: arm64: Enable workaround for Cavium erratum 27456 on thunderx-81xx Cavium erratum 27456 commit 104a0c02e8b1 ("arm64: Add workaround for Cavium erratum 27456") is applicable for thunderx-81xx pass1.0 SoC as well. Adding code to enable to 81xx. Signed-off-by: Ganapatrao Kulkarni Reviewed-by: Andrew Pinski Signed-off-by: Will Deacon diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 87e1985..9d9fd4b 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -80,12 +80,14 @@ #define APM_CPU_PART_POTENZA 0x000 #define CAVIUM_CPU_PART_THUNDERX 0x0A1 +#define CAVIUM_CPU_PART_THUNDERX_81XX 0x0A2 #define BRCM_CPU_PART_VULCAN 0x516 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_THUNDERX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX) +#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #ifndef __ASSEMBLY__ diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index d427894..af716b6 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -98,6 +98,12 @@ const struct arm64_cpu_capabilities arm64_errata[] = { MIDR_RANGE(MIDR_THUNDERX, 0x00, (1 << MIDR_VARIANT_SHIFT) | 1), }, + { + /* Cavium ThunderX, T81 pass 1.0 */ + .desc = "Cavium erratum 27456", + .capability = ARM64_WORKAROUND_CAVIUM_27456, + MIDR_RANGE(MIDR_THUNDERX_81XX, 0x00, 0x00), + }, #endif { } -- cgit v0.10.2 From 3777ed688fba82d0bd43f9fc1ebbc6abe788576d Mon Sep 17 00:00:00 2001 From: Quentin Armitage Date: Thu, 16 Jun 2016 08:00:14 +0100 Subject: ipvs: fix bind to link-local mcast IPv6 address in backup When using HEAD from https://git.kernel.org/cgit/utils/kernel/ipvsadm/ipvsadm.git/, the command: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group ff02::1:81 fails with the error message: Argument list too long whereas both: ipvsadm --start-daemon master --mcast-interface eth0.60 \ --mcast-group ff02::1:81 and: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group 224.0.0.81 are successful. The error message "Argument list too long" isn't helpful. The error occurs because an IPv6 address is given in backup mode. The error is in make_receive_sock() in net/netfilter/ipvs/ip_vs_sync.c, since it fails to set the interface on the address or the socket before calling inet6_bind() (via sock->ops->bind), where the test 'if (!sk->sk_bound_dev_if)' failed. Setting sock->sk->sk_bound_dev_if on the socket before calling inet6_bind() resolves the issue. Fixes: d33288172e72 ("ipvs: add more mcast parameters for the sync daemon") Signed-off-by: Quentin Armitage Acked-by: Julian Anastasov Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c index 803001a..1b07578 100644 --- a/net/netfilter/ipvs/ip_vs_sync.c +++ b/net/netfilter/ipvs/ip_vs_sync.c @@ -1545,7 +1545,8 @@ error: /* * Set up receiving multicast socket over UDP */ -static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id) +static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id, + int ifindex) { /* multicast addr */ union ipvs_sockaddr mcast_addr; @@ -1566,6 +1567,7 @@ static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id) set_sock_size(sock->sk, 0, result); get_mcast_sockaddr(&mcast_addr, &salen, &ipvs->bcfg, id); + sock->sk->sk_bound_dev_if = ifindex; result = sock->ops->bind(sock, (struct sockaddr *)&mcast_addr, salen); if (result < 0) { pr_err("Error binding to the multicast addr\n"); @@ -1868,7 +1870,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c, if (state == IP_VS_STATE_MASTER) sock = make_send_sock(ipvs, id); else - sock = make_receive_sock(ipvs, id); + sock = make_receive_sock(ipvs, id, dev->ifindex); if (IS_ERR(sock)) { result = PTR_ERR(sock); goto outtinfo; -- cgit v0.10.2 From 78c4e172412de5d0456dc00d2b34050aa0b683b5 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 5 Jul 2016 17:32:29 -0400 Subject: Revert "ecryptfs: forbid opening files without mmap handler" This reverts commit 2f36db71009304b3f0b95afacd8eba1f9f046b87. It fixed a local root exploit but also introduced a dependency on the lower file system implementing an mmap operation just to open a file, which is a bit of a heavy hammer. The right fix is to have mmap depend on the existence of the mmap handler instead. Signed-off-by: Jeff Mahoney Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c index e818f5a..866bb18 100644 --- a/fs/ecryptfs/kthread.c +++ b/fs/ecryptfs/kthread.c @@ -25,7 +25,6 @@ #include #include #include -#include #include "ecryptfs_kernel.h" struct ecryptfs_open_req { @@ -148,7 +147,7 @@ int ecryptfs_privileged_open(struct file **lower_file, flags |= IS_RDONLY(d_inode(lower_dentry)) ? O_RDONLY : O_RDWR; (*lower_file) = dentry_open(&req.path, flags, cred); if (!IS_ERR(*lower_file)) - goto have_file; + goto out; if ((flags & O_ACCMODE) == O_RDONLY) { rc = PTR_ERR((*lower_file)); goto out; @@ -166,16 +165,8 @@ int ecryptfs_privileged_open(struct file **lower_file, mutex_unlock(&ecryptfs_kthread_ctl.mux); wake_up(&ecryptfs_kthread_ctl.wait); wait_for_completion(&req.done); - if (IS_ERR(*lower_file)) { + if (IS_ERR(*lower_file)) rc = PTR_ERR(*lower_file); - goto out; - } -have_file: - if ((*lower_file)->f_op->mmap == NULL) { - fput(*lower_file); - *lower_file = NULL; - rc = -EMEDIUMTYPE; - } out: return rc; } -- cgit v0.10.2 From 30a46a4647fd1df9cf52e43bf467f0d9265096ca Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 7 Jul 2016 13:41:11 -0700 Subject: apparmor: fix oops, validate buffer size in apparmor_setprocattr() When proc_pid_attr_write() was changed to use memdup_user apparmor's (interface violating) assumption that the setprocattr buffer was always a single page was violated. The size test is not strictly speaking needed as proc_pid_attr_write() will reject anything larger, but for the sake of robustness we can keep it in. SMACK and SELinux look safe to me, but somebody else should probably have a look just in case. Based on original patch from Vegard Nossum modified for the case that apparmor provides null termination. Fixes: bb646cdb12e75d82258c2f2e7746d5952d3e321a Reported-by: Vegard Nossum Cc: Al Viro Cc: John Johansen Cc: Paul Moore Cc: Stephen Smalley Cc: Eric Paris Cc: Casey Schaufler Cc: stable@kernel.org Signed-off-by: John Johansen Reviewed-by: Tyler Hicks Signed-off-by: James Morris diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index 2660fbc..7798e16 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -500,34 +500,34 @@ static int apparmor_setprocattr(struct task_struct *task, char *name, { struct common_audit_data sa; struct apparmor_audit_data aad = {0,}; - char *command, *args = value; + char *command, *largs = NULL, *args = value; size_t arg_size; int error; if (size == 0) return -EINVAL; - /* args points to a PAGE_SIZE buffer, AppArmor requires that - * the buffer must be null terminated or have size <= PAGE_SIZE -1 - * so that AppArmor can null terminate them - */ - if (args[size - 1] != '\0') { - if (size == PAGE_SIZE) - return -EINVAL; - args[size] = '\0'; - } - /* task can only write its own attributes */ if (current != task) return -EACCES; - args = value; + /* AppArmor requires that the buffer must be null terminated atm */ + if (args[size - 1] != '\0') { + /* null terminate */ + largs = args = kmalloc(size + 1, GFP_KERNEL); + if (!args) + return -ENOMEM; + memcpy(args, value, size); + args[size] = '\0'; + } + + error = -EINVAL; args = strim(args); command = strsep(&args, " "); if (!args) - return -EINVAL; + goto out; args = skip_spaces(args); if (!*args) - return -EINVAL; + goto out; arg_size = size - (args - (char *) value); if (strcmp(name, "current") == 0) { @@ -553,10 +553,12 @@ static int apparmor_setprocattr(struct task_struct *task, char *name, goto fail; } else /* only support the "current" and "exec" process attributes */ - return -EINVAL; + goto fail; if (!error) error = size; +out: + kfree(largs); return error; fail: @@ -565,9 +567,9 @@ fail: aad.profile = aa_current_profile(); aad.op = OP_SETPROCATTR; aad.info = name; - aad.error = -EINVAL; + aad.error = error = -EINVAL; aa_audit_msg(AUDIT_APPARMOR_DENIED, &sa, NULL); - return -EINVAL; + goto out; } static int apparmor_task_setrlimit(struct task_struct *task, -- cgit v0.10.2 From 8a132099f080d7384bb6ab4cc168f76cb4b47d08 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Fri, 8 Jul 2016 14:26:57 +0800 Subject: ALSA: hda/realtek - add new pin definition in alc225 pin quirk table We have some Dell laptops which can't detect headset mic, the machines use the codec ALC225, they have some new pin configuration values, after adding them in the alc225 pin quirk table, they work well. Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5fac786..abcb5a6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5738,7 +5738,6 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {} }; #define ALC225_STANDARD_PINS \ - {0x12, 0xb7a60130}, \ {0x21, 0x04211020} #define ALC256_STANDARD_PINS \ @@ -5763,10 +5762,24 @@ static const struct hda_model_fixup alc269_fixup_models[] = { static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, ALC225_STANDARD_PINS, + {0x12, 0xb7a60130}, {0x14, 0x901701a0}), SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, ALC225_STANDARD_PINS, + {0x12, 0xb7a60130}, {0x14, 0x901701b0}), + SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC225_STANDARD_PINS, + {0x12, 0xb7a60150}, + {0x14, 0x901701a0}), + SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC225_STANDARD_PINS, + {0x12, 0xb7a60150}, + {0x14, 0x901701b0}), + SND_HDA_PIN_QUIRK(0x10ec0225, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, + ALC225_STANDARD_PINS, + {0x12, 0xb7a60130}, + {0x1b, 0x90170110}), SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE, {0x14, 0x90170110}, {0x21, 0x02211020}), -- cgit v0.10.2 From f388cdcdd160687c6650833f286b9c89c50960ff Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Jul 2016 08:05:19 +0200 Subject: ALSA: ctl: Stop notification after disconnection snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/control.c b/sound/core/control.c index a85d455..b4fe9b0 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -160,6 +160,8 @@ void snd_ctl_notify(struct snd_card *card, unsigned int mask, if (snd_BUG_ON(!card || !id)) return; + if (card->shutdown) + return; read_lock(&card->ctl_files_rwlock); #if IS_ENABLED(CONFIG_SND_MIXER_OSS) card->mixer_oss_change_count++; -- cgit v0.10.2 From a8ff48cb70835f48de5703052760312019afea55 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 8 Jul 2016 08:23:43 +0200 Subject: ALSA: pcm: Free chmap at PCM free callback, too The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by: Laxminath Kasam Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 308c9ec..8e980aa 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -849,6 +849,14 @@ int snd_pcm_new_internal(struct snd_card *card, const char *id, int device, } EXPORT_SYMBOL(snd_pcm_new_internal); +static void free_chmap(struct snd_pcm_str *pstr) +{ + if (pstr->chmap_kctl) { + snd_ctl_remove(pstr->pcm->card, pstr->chmap_kctl); + pstr->chmap_kctl = NULL; + } +} + static void snd_pcm_free_stream(struct snd_pcm_str * pstr) { struct snd_pcm_substream *substream, *substream_next; @@ -871,6 +879,7 @@ static void snd_pcm_free_stream(struct snd_pcm_str * pstr) kfree(setup); } #endif + free_chmap(pstr); if (pstr->substream_count) put_device(&pstr->dev); } @@ -1135,10 +1144,7 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) for (cidx = 0; cidx < 2; cidx++) { if (!pcm->internal) snd_unregister_device(&pcm->streams[cidx].dev); - if (pcm->streams[cidx].chmap_kctl) { - snd_ctl_remove(pcm->card, pcm->streams[cidx].chmap_kctl); - pcm->streams[cidx].chmap_kctl = NULL; - } + free_chmap(&pcm->streams[cidx]); } mutex_unlock(&pcm->open_mutex); mutex_unlock(®ister_mutex); -- cgit v0.10.2 From 7469be95a487319514adce2304ad2af3553d2fc9 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 7 Jul 2016 01:32:04 -0600 Subject: xenbus: don't bail early from xenbus_dev_request_and_reply() xenbus_dev_request_and_reply() needs to track whether a transaction is open. For XS_TRANSACTION_START messages it calls transaction_start() and for XS_TRANSACTION_END messages it calls transaction_end(). If sending an XS_TRANSACTION_START message fails or responds with an an error, the transaction is not open and transaction_end() must be called. If sending an XS_TRANSACTION_END message fails, the transaction is still open, but if an error response is returned the transaction is closed. Commit 027bd7e89906 ("xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart") introduced a regression where failed XS_TRANSACTION_START messages were leaving the transaction open. This can cause problems with suspend (and migration) as all transactions must be closed before suspending. It appears that the problematic change was added accidentally, so just remove it. Signed-off-by: Jan Beulich Cc: Konrad Rzeszutek Wilk Cc: Signed-off-by: David Vrabel diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index 374b12a..0bd3d47 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -249,9 +249,6 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg) mutex_unlock(&xs_state.request_mutex); - if (IS_ERR(ret)) - return ret; - if ((msg->type == XS_TRANSACTION_END) || ((req_msg.type == XS_TRANSACTION_START) && (msg->type == XS_ERROR))) -- cgit v0.10.2 From e5a79475a7ae171fef82608c6e11f51bb85a6745 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 7 Jul 2016 01:32:35 -0600 Subject: xenbus: simplify xenbus_dev_request_and_reply() No need to retain a local copy of the full request message, only the type is really needed. Signed-off-by: Jan Beulich Signed-off-by: David Vrabel diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index 0bd3d47..22f7cd7 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -232,10 +232,10 @@ static void transaction_resume(void) void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg) { void *ret; - struct xsd_sockmsg req_msg = *msg; + enum xsd_sockmsg_type type = msg->type; int err; - if (req_msg.type == XS_TRANSACTION_START) + if (type == XS_TRANSACTION_START) transaction_start(); mutex_lock(&xs_state.request_mutex); @@ -250,8 +250,7 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg) mutex_unlock(&xs_state.request_mutex); if ((msg->type == XS_TRANSACTION_END) || - ((req_msg.type == XS_TRANSACTION_START) && - (msg->type == XS_ERROR))) + ((type == XS_TRANSACTION_START) && (msg->type == XS_ERROR))) transaction_end(); return ret; -- cgit v0.10.2 From c8607e020014cf11a61601a0005270bad81cabdf Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 6 Jul 2016 14:53:06 +0200 Subject: netfilter: nft_ct: fix expiration getter We need to compute timeout.expires - jiffies, not the other way around. Add a helper, another patch can then later change more places in conntrack code where we currently open-code this. Will allow us to only change one place later when we remove per-ct timer. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index dd78bea..b6083c3 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -284,6 +284,14 @@ static inline bool nf_is_loopback_packet(const struct sk_buff *skb) return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK; } +/* jiffies until ct expires, 0 if already expired */ +static inline unsigned long nf_ct_expires(const struct nf_conn *ct) +{ + long timeout = (long)ct->timeout.expires - (long)jiffies; + + return timeout > 0 ? timeout : 0; +} + struct kernel_param; int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp); diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c index 137e308..81fbb45 100644 --- a/net/netfilter/nft_ct.c +++ b/net/netfilter/nft_ct.c @@ -54,7 +54,6 @@ static void nft_ct_get_eval(const struct nft_expr *expr, const struct nf_conn_help *help; const struct nf_conntrack_tuple *tuple; const struct nf_conntrack_helper *helper; - long diff; unsigned int state; ct = nf_ct_get(pkt->skb, &ctinfo); @@ -94,10 +93,7 @@ static void nft_ct_get_eval(const struct nft_expr *expr, return; #endif case NFT_CT_EXPIRATION: - diff = (long)jiffies - (long)ct->timeout.expires; - if (diff < 0) - diff = 0; - *dest = jiffies_to_msecs(diff); + *dest = jiffies_to_msecs(nf_ct_expires(ct)); return; case NFT_CT_HELPER: if (ct->master == NULL) -- cgit v0.10.2 From 6f2d9d99213514360034c6d52d2c3919290b3504 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 8 Jul 2016 06:15:07 -0600 Subject: xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7 As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on both Intel and AMD systems. Doing any kind of hardware capability checks in the driver as a prerequisite was wrong anyway: With the hypervisor being in charge, all such checking should be done by it. If ACPI data gets uploaded despite some missing capability, the hypervisor is free to ignore part or all of that data. Ditch the entire check_prereq() function, and do the only valid check (xen_initial_domain()) in the caller in its place. Signed-off-by: Jan Beulich Cc: Signed-off-by: David Vrabel diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c index 076970a..4ce10bc 100644 --- a/drivers/xen/xen-acpi-processor.c +++ b/drivers/xen/xen-acpi-processor.c @@ -423,36 +423,7 @@ upload: return 0; } -static int __init check_prereq(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (!xen_initial_domain()) - return -ENODEV; - - if (!acpi_gbl_FADT.smi_command) - return -ENODEV; - - if (c->x86_vendor == X86_VENDOR_INTEL) { - if (!cpu_has(c, X86_FEATURE_EST)) - return -ENODEV; - return 0; - } - if (c->x86_vendor == X86_VENDOR_AMD) { - /* Copied from powernow-k8.h, can't include ../cpufreq/powernow - * as we get compile warnings for the static functions. - */ -#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 -#define USE_HW_PSTATE 0x00000080 - u32 eax, ebx, ecx, edx; - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) != USE_HW_PSTATE) - return -ENODEV; - return 0; - } - return -ENODEV; -} /* acpi_perf_data is a pointer to percpu data. */ static struct acpi_processor_performance __percpu *acpi_perf_data; @@ -509,10 +480,10 @@ struct notifier_block xen_acpi_processor_resume_nb = { static int __init xen_acpi_processor_init(void) { unsigned int i; - int rc = check_prereq(); + int rc; - if (rc) - return rc; + if (!xen_initial_domain()) + return -ENODEV; nr_acpi_bits = get_max_acpi_id() + 1; acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL); -- cgit v0.10.2 From 58541f7a6458e17ab417321b284f0090f530aa91 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Thu, 7 Jul 2016 11:01:30 -0700 Subject: drm/vmwgfx: Fix error paths when mapping framebuffer Rather than returning immediately, make sure to unlock the mutexes first. Signed-off-by: Sinclair Yeh Reviewed-by: Charmaine Lee Reported-by: Emil Velikov Cc: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 66eaa30..d2d9395 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -589,7 +589,7 @@ static int vmw_fb_set_par(struct fb_info *info) ret = vfb->pin(vfb); if (ret) { DRM_ERROR("Could not pin the fbdev framebuffer.\n"); - return ret; + goto out_unlock; } ret = ttm_bo_kmap(&par->vmw_bo->base, 0, @@ -597,7 +597,7 @@ static int vmw_fb_set_par(struct fb_info *info) if (ret) { vfb->unpin(vfb); DRM_ERROR("Could not map the fbdev framebuffer.\n"); - return ret; + goto out_unlock; } par->bo_ptr = ttm_kmap_obj_virtual(&par->map, &par->bo_iowrite); -- cgit v0.10.2 From f0fe970df3838c202ef6c07a4c2b36838ef0a88b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 5 Jul 2016 17:32:30 -0400 Subject: ecryptfs: don't allow mmap when the lower fs doesn't support it There are legitimate reasons to disallow mmap on certain files, notably in sysfs or procfs. We shouldn't emulate mmap support on file systems that don't offer support natively. CVE-2016-1583 Signed-off-by: Jeff Mahoney Cc: stable@vger.kernel.org [tyhicks: clean up f_op check by using ecryptfs_file_to_lower()] Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 53d0141..ca4e837 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -169,6 +169,19 @@ out: return rc; } +static int ecryptfs_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct file *lower_file = ecryptfs_file_to_lower(file); + /* + * Don't allow mmap on top of file systems that don't support it + * natively. If FILESYSTEM_MAX_STACK_DEPTH > 2 or ecryptfs + * allows recursive mounting, this will need to be extended. + */ + if (!lower_file->f_op->mmap) + return -ENODEV; + return generic_file_mmap(file, vma); +} + /** * ecryptfs_open * @inode: inode specifying file to open @@ -403,7 +416,7 @@ const struct file_operations ecryptfs_main_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ecryptfs_compat_ioctl, #endif - .mmap = generic_file_mmap, + .mmap = ecryptfs_mmap, .open = ecryptfs_open, .flush = ecryptfs_flush, .release = ecryptfs_release, -- cgit v0.10.2 From fa5b4a509d7bbba5d45c8ea177bddfd0b618876a Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Fri, 8 Jul 2016 09:25:05 +0800 Subject: ACPI / EC: Fix code ordering issue in ec_remove_handlers() There is an order issue in ec_remove_handlers() that acpi_ec_stop() is called before removing the operation region handler. That is incorrect, because the operation region handler removal triggers _REG(DISCONNECT) which may result in new EC transactions to carry out. That existing issue has been triggered by the following commit: Commit: dcf15cbded656a12335bc4151f3f75f10080a375 Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC which changed the driver to call ec_remove_handlers() after invoking _REG(CONNECT), so the issue has become visible. Fixes: dcf15cbded65 (ACPI / EC: Fix a boot EC regresion by restoring boot EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421 Reported-and-tested-by: Wolfram Sang Reported-by: Nicholas Signed-off-by: Lv Zheng [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 73c76d6..290d6f5 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1331,8 +1331,6 @@ static int ec_install_handlers(struct acpi_ec *ec) static void ec_remove_handlers(struct acpi_ec *ec) { - acpi_ec_stop(ec, false); - if (test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) { if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) @@ -1340,6 +1338,19 @@ static void ec_remove_handlers(struct acpi_ec *ec) clear_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags); } + /* + * Stops handling the EC transactions after removing the operation + * region handler. This is required because _REG(DISCONNECT) + * invoked during the removal can result in new EC transactions. + * + * Flushes the EC requests and thus disables the GPE before + * removing the GPE handler. This is required by the current ACPICA + * GPE core. ACPICA GPE core will automatically disable a GPE when + * it is indicated but there is no way to handle it. So the drivers + * must disable the GPEs prior to removing the GPE handlers. + */ + acpi_ec_stop(ec, false); + if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags)) { if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler))) -- cgit v0.10.2 From 06708f81528725148473c0869d6af5f809c6824b Mon Sep 17 00:00:00 2001 From: Dmitri Epshtein Date: Wed, 6 Jul 2016 04:18:58 +0200 Subject: net: mvneta: set real interrupt per packet for tx_done Commit aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by: Dmitri Epshtein Signed-off-by: Marcin Wojtas Cc: # v3.10+ Fixes aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") Acked-by: Willy Tarreau Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index d5d263b..f92018b 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -244,7 +244,7 @@ /* Various constants */ /* Coalescing */ -#define MVNETA_TXDONE_COAL_PKTS 1 +#define MVNETA_TXDONE_COAL_PKTS 0 /* interrupt per packet */ #define MVNETA_RX_COAL_PKTS 32 #define MVNETA_RX_COAL_USEC 100 -- cgit v0.10.2 From 205e1e255c479f3fd77446415706463b282f94e4 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 5 Jul 2016 22:12:36 -0700 Subject: ppp: defer netns reference release for ppp channel Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcdd296 ("ppp: take reference on channels netns") Reported-by: Matt Bennett Cc: Paul Mackerras Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault Cc: Cyrill Gorcunov Signed-off-by: Cong Wang Reviewed-by: Cyrill Gorcunov Signed-off-by: David S. Miller diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 8dedafa..a30ee42 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -2601,8 +2601,6 @@ ppp_unregister_channel(struct ppp_channel *chan) spin_lock_bh(&pn->all_channels_lock); list_del(&pch->list); spin_unlock_bh(&pn->all_channels_lock); - put_net(pch->chan_net); - pch->chan_net = NULL; pch->file.dead = 1; wake_up_interruptible(&pch->file.rwait); @@ -3136,6 +3134,9 @@ ppp_disconnect_channel(struct channel *pch) */ static void ppp_destroy_channel(struct channel *pch) { + put_net(pch->chan_net); + pch->chan_net = NULL; + atomic_dec(&channel_count); if (!pch->file.dead) { -- cgit v0.10.2 From 92f7d07d68c1dfcbb80b3259f29dad8efe890803 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 6 Jul 2016 17:35:59 +0800 Subject: r8152: remove the setting of LAN_WAKE_EN The LAN_WAKE_EN is not used to determine if the device could support WOL. It is used to signal a GPIO pin when a WOL event occurs. The WOL still works even though it is disabled. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0da72d3..419f4ce 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2296,10 +2296,6 @@ static u32 __rtl_get_wol(struct r8152 *tp) u32 ocp_data; u32 wolopts = 0; - ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5); - if (!(ocp_data & LAN_WAKE_EN)) - return 0; - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34); if (ocp_data & LINK_ON_WAKE_EN) wolopts |= WAKE_PHY; @@ -2332,15 +2328,13 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5); - ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN); + ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN); if (wolopts & WAKE_UCAST) ocp_data |= UWF_EN; if (wolopts & WAKE_BCAST) ocp_data |= BWF_EN; if (wolopts & WAKE_MCAST) ocp_data |= MWF_EN; - if (wolopts & WAKE_ANY) - ocp_data |= LAN_WAKE_EN; ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); -- cgit v0.10.2 From 8709ed4d4b0eab04561c1ec9e6ea50fd1e3897ff Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Fri, 17 Jun 2016 17:15:03 -0700 Subject: x86/cpu: Fix duplicated X86_BUG(9) macro cpufeatures.h currently defines X86_BUG(9) twice on 32-bit: #define X86_BUG_NULL_SEG X86_BUG(9) /* Nulling a selector preserves the base */ ... #ifdef CONFIG_X86_32 #define X86_BUG_ESPFIX X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */ #endif I think what happened was that this added the X86_BUG_ESPFIX, but in an #ifdef below most of the bugs: 58a5aac53313 x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled Then this came along and added X86_BUG_NULL_SEG, but collided with the earlier one that did the bug below the main block defining all the X86_BUG()s. 7a5d67048745 x86/cpu: Probe the behavior of nulling out a segment at boot time Signed-off-by: Dave Hansen Acked-by: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160618001503.CEE1B141@viggo.jf.intel.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 4a41348..c64b1e9 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -301,10 +301,6 @@ #define X86_BUG_FXSAVE_LEAK X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */ #define X86_BUG_CLFLUSH_MONITOR X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */ #define X86_BUG_SYSRET_SS_ATTRS X86_BUG(8) /* SYSRET doesn't fix up SS attrs */ -#define X86_BUG_NULL_SEG X86_BUG(9) /* Nulling a selector preserves the base */ -#define X86_BUG_SWAPGS_FENCE X86_BUG(10) /* SWAPGS without input dep on GS */ - - #ifdef CONFIG_X86_32 /* * 64-bit kernels don't use X86_BUG_ESPFIX. Make the define conditional @@ -312,5 +308,7 @@ */ #define X86_BUG_ESPFIX X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */ #endif +#define X86_BUG_NULL_SEG X86_BUG(10) /* Nulling a selector preserves the base */ +#define X86_BUG_SWAPGS_FENCE X86_BUG(11) /* SWAPGS without input dep on GS */ #endif /* _ASM_X86_CPUFEATURES_H */ -- cgit v0.10.2 From b8efb894e672bd0080126c68a076ddcacfcbc0ef Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 6 Jul 2016 15:35:15 -0500 Subject: ibmvnic: properly start and stop tx queues Since ibmvnic uses multiple tx queues, start and stop all queues when opening and closing devices. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index ecdb685..f04830e 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -469,7 +469,8 @@ static int ibmvnic_open(struct net_device *netdev) crq.logical_link_state.link_state = IBMVNIC_LOGICAL_LNK_UP; ibmvnic_send_crq(adapter, &crq); - netif_start_queue(netdev); + netif_tx_start_all_queues(netdev); + return 0; bounce_map_failed: @@ -519,7 +520,7 @@ static int ibmvnic_close(struct net_device *netdev) for (i = 0; i < adapter->req_rx_queues; i++) napi_disable(&adapter->napi[i]); - netif_stop_queue(netdev); + netif_tx_stop_all_queues(netdev); if (adapter->bounce_buffer) { if (!dma_mapping_error(dev, adapter->bounce_buffer_dma)) { -- cgit v0.10.2 From 88eb98a0178219e1d6e9037b71d293f19b89eef2 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 6 Jul 2016 15:35:16 -0500 Subject: ibmvnic: dispose irq mappings IRQ mappings were not being properly disposed when releasing sub-CRQ's. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index f04830e..79d2ab3 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1257,6 +1257,7 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter) if (adapter->tx_scrq[i]) { free_irq(adapter->tx_scrq[i]->irq, adapter->tx_scrq[i]); + irq_dispose_mapping(adapter->tx_scrq[i]->irq); release_sub_crq_queue(adapter, adapter->tx_scrq[i]); } @@ -1268,6 +1269,7 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter) if (adapter->rx_scrq[i]) { free_irq(adapter->rx_scrq[i]->irq, adapter->rx_scrq[i]); + irq_dispose_mapping(adapter->rx_scrq[i]->irq); release_sub_crq_queue(adapter, adapter->rx_scrq[i]); } -- cgit v0.10.2 From ea22d51a7831b062978fcf07c3c5ac7ecbb6cbeb Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 6 Jul 2016 15:35:17 -0500 Subject: ibmvnic: simplify and improve driver probe function This patch creates a function that handles sub-CRQ IRQ creation separately from sub-CRQ initialization. Another function is then needed to release sub-CRQ resources prior to sub-CRQ IRQ creation. These additions allow the driver probe function to be simplified, specifically during the VNIC Server login process. A timeout is also included while waiting for completion of the login process in case the VNIC Server is not available or some other error occurs. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 79d2ab3..52b0c07 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -89,6 +89,7 @@ MODULE_VERSION(IBMVNIC_DRIVER_VERSION); static int ibmvnic_version = IBMVNIC_INITIAL_VERSION; static int ibmvnic_remove(struct vio_dev *); static void release_sub_crqs(struct ibmvnic_adapter *); +static void release_sub_crqs_no_irqs(struct ibmvnic_adapter *); static int ibmvnic_reset_crq(struct ibmvnic_adapter *); static int ibmvnic_send_crq_init(struct ibmvnic_adapter *); static int ibmvnic_reenable_crq_queue(struct ibmvnic_adapter *); @@ -1213,12 +1214,6 @@ static struct ibmvnic_sub_crq_queue *init_sub_crq_queue(struct ibmvnic_adapter goto reg_failed; } - scrq->irq = irq_create_mapping(NULL, scrq->hw_irq); - if (scrq->irq == NO_IRQ) { - dev_err(dev, "Error mapping irq\n"); - goto map_irq_failed; - } - scrq->adapter = adapter; scrq->size = 4 * PAGE_SIZE / sizeof(*scrq->msgs); scrq->cur = 0; @@ -1231,12 +1226,6 @@ static struct ibmvnic_sub_crq_queue *init_sub_crq_queue(struct ibmvnic_adapter return scrq; -map_irq_failed: - do { - rc = plpar_hcall_norets(H_FREE_SUB_CRQ, - adapter->vdev->unit_address, - scrq->crq_num); - } while (rc == H_BUSY || H_IS_LONG_BUSY(rc)); reg_failed: dma_unmap_single(dev, scrq->msg_token, 4 * PAGE_SIZE, DMA_BIDIRECTIONAL); @@ -1279,6 +1268,29 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter) adapter->requested_caps = 0; } +static void release_sub_crqs_no_irqs(struct ibmvnic_adapter *adapter) +{ + int i; + + if (adapter->tx_scrq) { + for (i = 0; i < adapter->req_tx_queues; i++) + if (adapter->tx_scrq[i]) + release_sub_crq_queue(adapter, + adapter->tx_scrq[i]); + adapter->tx_scrq = NULL; + } + + if (adapter->rx_scrq) { + for (i = 0; i < adapter->req_rx_queues; i++) + if (adapter->rx_scrq[i]) + release_sub_crq_queue(adapter, + adapter->rx_scrq[i]); + adapter->rx_scrq = NULL; + } + + adapter->requested_caps = 0; +} + static int disable_scrq_irq(struct ibmvnic_adapter *adapter, struct ibmvnic_sub_crq_queue *scrq) { @@ -1398,6 +1410,66 @@ static irqreturn_t ibmvnic_interrupt_rx(int irq, void *instance) return IRQ_HANDLED; } +static int init_sub_crq_irqs(struct ibmvnic_adapter *adapter) +{ + struct device *dev = &adapter->vdev->dev; + struct ibmvnic_sub_crq_queue *scrq; + int i = 0, j = 0; + int rc = 0; + + for (i = 0; i < adapter->req_tx_queues; i++) { + scrq = adapter->tx_scrq[i]; + scrq->irq = irq_create_mapping(NULL, scrq->hw_irq); + + if (scrq->irq == NO_IRQ) { + rc = -EINVAL; + dev_err(dev, "Error mapping irq\n"); + goto req_tx_irq_failed; + } + + rc = request_irq(scrq->irq, ibmvnic_interrupt_tx, + 0, "ibmvnic_tx", scrq); + + if (rc) { + dev_err(dev, "Couldn't register tx irq 0x%x. rc=%d\n", + scrq->irq, rc); + irq_dispose_mapping(scrq->irq); + goto req_rx_irq_failed; + } + } + + for (i = 0; i < adapter->req_rx_queues; i++) { + scrq = adapter->rx_scrq[i]; + scrq->irq = irq_create_mapping(NULL, scrq->hw_irq); + if (scrq->irq == NO_IRQ) { + rc = -EINVAL; + dev_err(dev, "Error mapping irq\n"); + goto req_rx_irq_failed; + } + rc = request_irq(scrq->irq, ibmvnic_interrupt_rx, + 0, "ibmvnic_rx", scrq); + if (rc) { + dev_err(dev, "Couldn't register rx irq 0x%x. rc=%d\n", + scrq->irq, rc); + irq_dispose_mapping(scrq->irq); + goto req_rx_irq_failed; + } + } + return rc; + +req_rx_irq_failed: + for (j = 0; j < i; j++) + free_irq(adapter->rx_scrq[j]->irq, adapter->rx_scrq[j]); + irq_dispose_mapping(adapter->rx_scrq[j]->irq); + i = adapter->req_tx_queues; +req_tx_irq_failed: + for (j = 0; j < i; j++) + free_irq(adapter->tx_scrq[j]->irq, adapter->tx_scrq[j]); + irq_dispose_mapping(adapter->rx_scrq[j]->irq); + release_sub_crqs_no_irqs(adapter); + return rc; +} + static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) { struct device *dev = &adapter->vdev->dev; @@ -1406,8 +1478,7 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) union ibmvnic_crq crq; int total_queues; int more = 0; - int i, j; - int rc; + int i; if (!retry) { /* Sub-CRQ entries are 32 byte long */ @@ -1486,13 +1557,6 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) for (i = 0; i < adapter->req_tx_queues; i++) { adapter->tx_scrq[i] = allqueues[i]; adapter->tx_scrq[i]->pool_index = i; - rc = request_irq(adapter->tx_scrq[i]->irq, ibmvnic_interrupt_tx, - 0, "ibmvnic_tx", adapter->tx_scrq[i]); - if (rc) { - dev_err(dev, "Couldn't register tx irq 0x%x. rc=%d\n", - adapter->tx_scrq[i]->irq, rc); - goto req_tx_irq_failed; - } } adapter->rx_scrq = kcalloc(adapter->req_rx_queues, @@ -1503,13 +1567,6 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) for (i = 0; i < adapter->req_rx_queues; i++) { adapter->rx_scrq[i] = allqueues[i + adapter->req_tx_queues]; adapter->rx_scrq[i]->scrq_num = i; - rc = request_irq(adapter->rx_scrq[i]->irq, ibmvnic_interrupt_rx, - 0, "ibmvnic_rx", adapter->rx_scrq[i]); - if (rc) { - dev_err(dev, "Couldn't register rx irq 0x%x. rc=%d\n", - adapter->rx_scrq[i]->irq, rc); - goto req_rx_irq_failed; - } } memset(&crq, 0, sizeof(crq)); @@ -1562,15 +1619,6 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) return; -req_rx_irq_failed: - for (j = 0; j < i; j++) - free_irq(adapter->rx_scrq[j]->irq, adapter->rx_scrq[j]); - i = adapter->req_tx_queues; -req_tx_irq_failed: - for (j = 0; j < i; j++) - free_irq(adapter->tx_scrq[j]->irq, adapter->tx_scrq[j]); - kfree(adapter->rx_scrq); - adapter->rx_scrq = NULL; rx_failed: kfree(adapter->tx_scrq); adapter->tx_scrq = NULL; @@ -2351,9 +2399,9 @@ static void handle_request_cap_rsp(union ibmvnic_crq *crq, *req_value, (long int)be32_to_cpu(crq->request_capability_rsp. number), name); - release_sub_crqs(adapter); + release_sub_crqs_no_irqs(adapter); *req_value = be32_to_cpu(crq->request_capability_rsp.number); - complete(&adapter->init_done); + init_sub_crqs(adapter, 1); return; default: dev_err(dev, "Error %d in request cap rsp\n", @@ -2662,7 +2710,7 @@ static void handle_query_cap_rsp(union ibmvnic_crq *crq, out: if (atomic_read(&adapter->running_cap_queries) == 0) - complete(&adapter->init_done); + init_sub_crqs(adapter, 0); /* We're done querying the capabilities, initialize sub-crqs */ } @@ -3560,6 +3608,7 @@ static const struct file_operations ibmvnic_dump_ops = { static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) { + unsigned long timeout = msecs_to_jiffies(30000); struct ibmvnic_adapter *adapter; struct net_device *netdev; unsigned char *mac_addr_p; @@ -3638,30 +3687,26 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) ibmvnic_send_crq_init(adapter); init_completion(&adapter->init_done); - wait_for_completion(&adapter->init_done); + if (!wait_for_completion_timeout(&adapter->init_done, timeout)) + return 0; do { - adapter->renegotiate = false; - - init_sub_crqs(adapter, 0); - reinit_completion(&adapter->init_done); - wait_for_completion(&adapter->init_done); - if (adapter->renegotiate) { - release_sub_crqs(adapter); + adapter->renegotiate = false; + release_sub_crqs_no_irqs(adapter); send_cap_queries(adapter); reinit_completion(&adapter->init_done); - wait_for_completion(&adapter->init_done); + if (!wait_for_completion_timeout(&adapter->init_done, + timeout)) + return 0; } } while (adapter->renegotiate); - /* if init_sub_crqs is partially successful, retry */ - while (!adapter->tx_scrq || !adapter->rx_scrq) { - init_sub_crqs(adapter, 1); - - reinit_completion(&adapter->init_done); - wait_for_completion(&adapter->init_done); + rc = init_sub_crq_irqs(adapter); + if (rc) { + dev_err(&dev->dev, "failed to initialize sub crq irqs\n"); + goto free_debugfs; } netdev->real_num_tx_queues = adapter->req_tx_queues; @@ -3669,12 +3714,14 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) rc = register_netdev(netdev); if (rc) { dev_err(&dev->dev, "failed to register netdev rc=%d\n", rc); - goto free_debugfs; + goto free_sub_crqs; } dev_info(&dev->dev, "ibmvnic registered\n"); return 0; +free_sub_crqs: + release_sub_crqs(adapter); free_debugfs: if (adapter->debugfs_dir && !IS_ERR(adapter->debugfs_dir)) debugfs_remove_recursive(adapter->debugfs_dir); -- cgit v0.10.2 From 65dc689182ec5117896d876cc03405ac51427314 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 6 Jul 2016 15:35:18 -0500 Subject: ibmvnic: Fix passive VNIC server login process In some cases, if there is no VNIC server available during the driver probe, the driver should wait until it receives an initialization request from the VNIC Server to start the login process. Recent testing has show that this is incorrectly handled in the current driver. The proposed solution handles this initialization request by scheduling a task in the shared workqueue that completes the login process and registers the net device. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 52b0c07..88f3c85 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -75,6 +75,7 @@ #include #include #include +#include #include "ibmvnic.h" @@ -3253,8 +3254,8 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, dev_info(dev, "Partner initialized\n"); /* Send back a response */ rc = ibmvnic_send_crq_init_complete(adapter); - if (rc == 0) - send_version_xchg(adapter); + if (!rc) + schedule_work(&adapter->vnic_crq_init); else dev_err(dev, "Can't send initrsp rc=%ld\n", rc); break; @@ -3606,6 +3607,60 @@ static const struct file_operations ibmvnic_dump_ops = { .release = single_release, }; +static void handle_crq_init_rsp(struct work_struct *work) +{ + struct ibmvnic_adapter *adapter = container_of(work, + struct ibmvnic_adapter, + vnic_crq_init); + struct device *dev = &adapter->vdev->dev; + struct net_device *netdev = adapter->netdev; + unsigned long timeout = msecs_to_jiffies(30000); + int rc; + + send_version_xchg(adapter); + reinit_completion(&adapter->init_done); + if (!wait_for_completion_timeout(&adapter->init_done, timeout)) { + dev_err(dev, "Passive init timeout\n"); + goto task_failed; + } + + do { + if (adapter->renegotiate) { + adapter->renegotiate = false; + release_sub_crqs_no_irqs(adapter); + send_cap_queries(adapter); + + reinit_completion(&adapter->init_done); + if (!wait_for_completion_timeout(&adapter->init_done, + timeout)) { + dev_err(dev, "Passive init timeout\n"); + goto task_failed; + } + } + } while (adapter->renegotiate); + rc = init_sub_crq_irqs(adapter); + + if (rc) + goto task_failed; + + netdev->real_num_tx_queues = adapter->req_tx_queues; + + rc = register_netdev(netdev); + if (rc) { + dev_err(dev, + "failed to register netdev rc=%d\n", rc); + goto register_failed; + } + dev_info(dev, "ibmvnic registered\n"); + + return; + +register_failed: + release_sub_crqs(adapter); +task_failed: + dev_err(dev, "Passive initialization was not successful\n"); +} + static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) { unsigned long timeout = msecs_to_jiffies(30000); @@ -3645,6 +3700,8 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) netdev->ethtool_ops = &ibmvnic_ethtool_ops; SET_NETDEV_DEV(netdev, &dev->dev); + INIT_WORK(&adapter->vnic_crq_init, handle_crq_init_rsp); + spin_lock_init(&adapter->stats_lock); rc = ibmvnic_init_crq_queue(adapter); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 0b66a50..e82898f 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -1045,4 +1045,6 @@ struct ibmvnic_adapter { u64 opt_rxba_entries_per_subcrq; __be64 tx_rx_desc_req; u8 map_id; + + struct work_struct vnic_crq_init; }; -- cgit v0.10.2 From 95556a883834122c616bbeb942654d745ceb9712 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 8 Jul 2016 11:03:57 +0200 Subject: dccp: avoid deadlock in dccp_v4_ctl_send_reset In the prep work I did before enabling BH while handling socket backlog, I missed two points in DCCP : 1) dccp_v4_ctl_send_reset() uses bh_lock_sock(), assuming BH were blocked. It is not anymore always true. 2) dccp_v4_route_skb() was using __IP_INC_STATS() instead of IP_INC_STATS() A similar fix was done for TCP, in commit 47dcc20a39d0 ("ipv4: tcp: ip_send_unicast_reply() is not BH safe") Fixes: 7309f8821fd6 ("dccp: do not assume DCCP code is non preemptible") Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet Reported-by: Dmitry Vyukov Signed-off-by: David S. Miller diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 5c7e413..25dd25b 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -462,7 +462,7 @@ static struct dst_entry* dccp_v4_route_skb(struct net *net, struct sock *sk, security_skb_classify_flow(skb, flowi4_to_flowi(&fl4)); rt = ip_route_output_flow(net, &fl4, sk); if (IS_ERR(rt)) { - __IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); return NULL; } @@ -527,17 +527,19 @@ static void dccp_v4_ctl_send_reset(const struct sock *sk, struct sk_buff *rxskb) rxiph->daddr); skb_dst_set(skb, dst_clone(dst)); + local_bh_disable(); bh_lock_sock(ctl_sk); err = ip_build_and_send_pkt(skb, ctl_sk, rxiph->daddr, rxiph->saddr, NULL); bh_unlock_sock(ctl_sk); if (net_xmit_eval(err) == 0) { - DCCP_INC_STATS(DCCP_MIB_OUTSEGS); - DCCP_INC_STATS(DCCP_MIB_OUTRSTS); + __DCCP_INC_STATS(DCCP_MIB_OUTSEGS); + __DCCP_INC_STATS(DCCP_MIB_OUTRSTS); } + local_bh_enable(); out: - dst_release(dst); + dst_release(dst); } static void dccp_v4_reqsk_destructor(struct request_sock *req) -- cgit v0.10.2 From 0ea5ad869c85ac604f3e022bf2c5bef54838433b Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Wed, 15 Jun 2016 15:45:58 -0500 Subject: objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols Mathieu Desnoyers reported that the STACK_FRAME_NON_STANDARD macro wasn't working with the lttng_filter_interpret_bytecode() function in the lttng-modules code. Usually the relocation created by STACK_FRAME_NON_STANDARD creates a reference to a section symbol like this: Offset Type Value Addend Name 000000000000000000 X86_64_64 000000000000000000 +3136 .text But in this case it created a reference to a function symbol: Offset Type Value Addend Name 000000000000000000 X86_64_64 0x00000000000003a0 +0 lttng_filter_interpret_bytecode To be honest I have no idea what causes gcc to decide to do one over the other. But both are valid ELF, so add support for the function symbol. Reported-by: Mathieu Desnoyers Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: lttng-dev@lists.lttng.org Link: http://lkml.kernel.org/r/9cee42843bc6d94e990a152e4e0319cfdf6756ef.1466023450.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c index e8a1e69..25d8031 100644 --- a/tools/objtool/builtin-check.c +++ b/tools/objtool/builtin-check.c @@ -122,10 +122,14 @@ static bool ignore_func(struct objtool_file *file, struct symbol *func) /* check for STACK_FRAME_NON_STANDARD */ if (file->whitelist && file->whitelist->rela) - list_for_each_entry(rela, &file->whitelist->rela->rela_list, list) - if (rela->sym->sec == func->sec && + list_for_each_entry(rela, &file->whitelist->rela->rela_list, list) { + if (rela->sym->type == STT_SECTION && + rela->sym->sec == func->sec && rela->addend == func->offset) return true; + if (rela->sym->type == STT_FUNC && rela->sym == func) + return true; + } /* check if it has a context switching instruction */ func_for_each_insn(file, func, insn) -- cgit v0.10.2 From eb019503569c8c701f1e9c70e848d99c6680839b Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 10 Jul 2016 19:14:01 +0200 Subject: perf/x86: Fix bogus kernel printk, again This showed up as "6Failed to access..." here. Signed-off-by: Vegard Nossum Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Chen Yucong Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 1b74dde7c47c ("x86/cpu: Convert printk(KERN_ ...) to pr_(...)") Link: http://lkml.kernel.org/r/1468170841-17045-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 26ced53..91eac39 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -263,7 +263,7 @@ static bool check_hw_exists(void) msr_fail: pr_cont("Broken PMU hardware detected, using software events only.\n"); - pr_info("%sFailed to access perfctr msr (MSR %x is %Lx)\n", + printk("%sFailed to access perfctr msr (MSR %x is %Lx)\n", boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR, reg, val_new); -- cgit v0.10.2 From 447d29d1d3aed839e74c2401ef63387780ac51ed Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 12 Jun 2016 12:31:53 +0200 Subject: x86/quirks: Apply nvidia_bugs quirk only on root bus Since the following commit: 8659c406ade3 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by: Lukas Wunner Cc: Andy Lutomirski Cc: Bjorn Helgaas Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Yinghai Lu Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.de Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index bca14c8..256976f 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -76,6 +76,13 @@ static void __init nvidia_bugs(int num, int slot, int func) #ifdef CONFIG_ACPI #ifdef CONFIG_X86_IO_APIC /* + * Only applies to Nvidia root ports (bus 0) and not to + * Nvidia graphics cards with PCI ports on secondary buses. + */ + if (num) + return; + + /* * All timer overrides on Nvidia are * wrong unless HPET is enabled. * Unfortunately that's not true on many Asus boards. -- cgit v0.10.2 From 850c321027c2e31d0afc71588974719a4b565550 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 12 Jun 2016 12:31:53 +0200 Subject: x86/quirks: Reintroduce scanning of secondary buses We used to scan secondary buses until the following commit that was applied in 2009: 8659c406ade3 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406ade3 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406ade3 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by: Lukas Wunner Cc: Andy Lutomirski Cc: Bjorn Helgaas Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Yinghai Lu Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.de Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 256976f..ea60c05 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -610,12 +610,6 @@ struct chipset { void (*f)(int num, int slot, int func); }; -/* - * Only works for devices on the root bus. If you add any devices - * not on bus 0 readd another loop level in early_quirks(). But - * be careful because at least the Nvidia quirk here relies on - * only matching on bus 0. - */ static struct chipset early_qrk[] __initdata = { { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, @@ -648,6 +642,8 @@ static struct chipset early_qrk[] __initdata = { {} }; +static void __init early_pci_scan_bus(int bus); + /** * check_dev_quirk - apply early quirks to a given PCI device * @num: bus number @@ -656,7 +652,7 @@ static struct chipset early_qrk[] __initdata = { * * Check the vendor & device ID against the early quirks table. * - * If the device is single function, let early_quirks() know so we don't + * If the device is single function, let early_pci_scan_bus() know so we don't * poke at this device again. */ static int __init check_dev_quirk(int num, int slot, int func) @@ -665,6 +661,7 @@ static int __init check_dev_quirk(int num, int slot, int func) u16 vendor; u16 device; u8 type; + u8 sec; int i; class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); @@ -692,25 +689,36 @@ static int __init check_dev_quirk(int num, int slot, int func) type = read_pci_config_byte(num, slot, func, PCI_HEADER_TYPE); + + if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) { + sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS); + if (sec > num) + early_pci_scan_bus(sec); + } + if (!(type & 0x80)) return -1; return 0; } -void __init early_quirks(void) +static void __init early_pci_scan_bus(int bus) { int slot, func; - if (!early_pci_allowed()) - return; - /* Poor man's PCI discovery */ - /* Only scan the root bus */ for (slot = 0; slot < 32; slot++) for (func = 0; func < 8; func++) { /* Only probe function 0 on single fn devices */ - if (check_dev_quirk(0, slot, func)) + if (check_dev_quirk(bus, slot, func)) break; } } + +void __init early_quirks(void) +{ + if (!early_pci_allowed()) + return; + + early_pci_scan_bus(0); +} -- cgit v0.10.2 From abb2bafd295fe962bbadc329dbfb2146457283ac Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 12 Jun 2016 12:31:53 +0200 Subject: x86/quirks: Add early quirk to reset Apple AirPort card MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [] pcie_isr [] sdhci_irq [sdhci] threaded [] sdhci_thread_irq [sdhci] [] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov # [MacBookPro8,1] Tested-by: Lukas Wunner # [MacBookPro9,1] Tested-by: Bryan Paradis # [MacBookPro9,2] Tested-by: Andrew Worsley # [MacBookPro10,1] Tested-by: Chris Bainbridge # [MacBookPro10,2] Signed-off-by: Lukas Wunner Acked-by: Rafał Miłecki Acked-by: Matt Fleming Cc: Andy Lutomirski Cc: Bjorn Helgaas Cc: Borislav Petkov Cc: Brian Gerst Cc: Chris Milsted Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Matthew Garrett Cc: Michael Buesch Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Yinghai Lu Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index ea60c05..57b7137 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -11,7 +11,11 @@ #include #include +#include +#include #include +#include +#include #include #include #include @@ -21,6 +25,9 @@ #include #include #include +#include + +#define dev_err(msg) pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg) static void __init fix_hypertransport_config(int num, int slot, int func) { @@ -597,6 +604,61 @@ static void __init force_disable_hpet(int num, int slot, int func) #endif } +#define BCM4331_MMIO_SIZE 16384 +#define BCM4331_PM_CAP 0x40 +#define bcma_aread32(reg) ioread32(mmio + 1 * BCMA_CORE_SIZE + reg) +#define bcma_awrite32(reg, val) iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg) + +static void __init apple_airport_reset(int bus, int slot, int func) +{ + void __iomem *mmio; + u16 pmcsr; + u64 addr; + int i; + + if (!dmi_match(DMI_SYS_VENDOR, "Apple Inc.")) + return; + + /* Card may have been put into PCI_D3hot by grub quirk */ + pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); + + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr); + mdelay(10); + + pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { + dev_err("Cannot power up Apple AirPort card\n"); + return; + } + } + + addr = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32; + addr &= PCI_BASE_ADDRESS_MEM_MASK; + + mmio = early_ioremap(addr, BCM4331_MMIO_SIZE); + if (!mmio) { + dev_err("Cannot iomap Apple AirPort card\n"); + return; + } + + pr_info("Resetting Apple AirPort card (left enabled by EFI)\n"); + + for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++) + udelay(10); + + bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + bcma_aread32(BCMA_RESET_CTL); + udelay(1); + + bcma_awrite32(BCMA_RESET_CTL, 0); + bcma_aread32(BCMA_RESET_CTL); + udelay(10); + + early_iounmap(mmio, BCM4331_MMIO_SIZE); +} #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 @@ -639,6 +701,8 @@ static struct chipset early_qrk[] __initdata = { */ { PCI_VENDOR_ID_INTEL, 0x0f00, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, + { PCI_VENDOR_ID_BROADCOM, 0x4331, + PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, {} }; diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index eda0909..f642c42 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -8,8 +8,6 @@ #include #include -#define BCMA_CORE_SIZE 0x1000 - #define bcma_err(bus, fmt, ...) \ pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) #define bcma_warn(bus, fmt, ...) \ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index e6b41f4..3db25df 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -159,6 +159,7 @@ struct bcma_host_ops { #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 +#define BCMA_CORE_SIZE 0x1000 /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 -- cgit v0.10.2 From 7f556567036cb7f89aabe2f0954b08566b4efb53 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sun, 10 Jul 2016 16:46:32 -0700 Subject: tmpfs: fix regression hang in fallocate undo The well-spotted fallocate undo fix is good in most cases, but not when fallocate failed on the very first page. index 0 then passes lend -1 to shmem_undo_range(), and that has two bad effects: (a) that it will undo every fallocation throughout the file, unrestricted by the current range; but more importantly (b) it can cause the undo to hang, because lend -1 is treated as truncation, which makes it keep on retrying until every page has gone, but those already fully instantiated will never go away. Big thank you to xfstests generic/269 which demonstrates this. Fixes: b9b4bb26af01 ("tmpfs: don't undo fallocate past its last page") Cc: stable@vger.kernel.org Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds diff --git a/mm/shmem.c b/mm/shmem.c index 24463b6..171dee7 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2225,9 +2225,11 @@ static long shmem_fallocate(struct file *file, int mode, loff_t offset, error = shmem_getpage(inode, index, &page, SGP_FALLOC); if (error) { /* Remove the !PageUptodate pages we added */ - shmem_undo_range(inode, - (loff_t)start << PAGE_SHIFT, - ((loff_t)index << PAGE_SHIFT) - 1, true); + if (index > start) { + shmem_undo_range(inode, + (loff_t)start << PAGE_SHIFT, + ((loff_t)index << PAGE_SHIFT) - 1, true); + } goto undone; } -- cgit v0.10.2 From 92d21ac74a9e3c09b0b01c764e530657e4c85c49 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 Jul 2016 20:24:59 -0700 Subject: Linux 4.7-rc7 diff --git a/Makefile b/Makefile index 0d50489..81b2262 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* -- cgit v0.10.2 From e8807e4470e6b4230b24c537d7179a945f0f7c40 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 10 Jul 2016 23:34:01 +0200 Subject: Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering" Revert commit 45209046c47b (ACPICA: Namespace: Fix namespace/interpreter lock ordering) that renders Dell Precision 5510 with the latest (1.2.10) BIOS applied unable to boot. Fixes: 45209046c47b (ACPICA: Namespace: Fix namespace/interpreter lock ordering) Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701 Reported-by: Greg White Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index 297f6aa..b5e2b0a 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -46,7 +46,6 @@ #include "acnamesp.h" #include "acdispat.h" #include "actables.h" -#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsload") @@ -79,8 +78,6 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) ACPI_FUNCTION_TRACE(ns_load_table); - acpi_ex_enter_interpreter(); - /* * Parse the table and load the namespace with all named * objects found within. Control methods are NOT parsed @@ -92,7 +89,7 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) */ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { - goto unlock_interp; + return_ACPI_STATUS(status); } /* If table already loaded into namespace, just return */ @@ -133,8 +130,6 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) unlock: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); -unlock_interp: - (void)acpi_ex_exit_interpreter(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index f631a47..1783cd7 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -47,6 +47,7 @@ #include "acparser.h" #include "acdispat.h" #include "actables.h" +#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsparse") @@ -170,6 +171,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) ACPI_FUNCTION_TRACE(ns_parse_table); + acpi_ex_enter_interpreter(); + /* * AML Parse, pass 1 * @@ -185,7 +188,7 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } /* @@ -201,8 +204,10 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, start_node); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto error_exit; } +error_exit: + acpi_ex_exit_interpreter(); return_ACPI_STATUS(status); } -- cgit v0.10.2 From ffd8d61845c90cea87bc3efa58ddff1b14dea8f2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 11 Jul 2016 16:18:18 +0200 Subject: Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading" Revert commit 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) that attempted to fix a deadlock issue introduced by a previous commit, but it led to a lock ordering inconsistency that caused further problems to appear. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index 21932d6..a1d177d 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -108,9 +108,7 @@ acpi_ex_add_table(u32 table_index, /* Add the table to the namespace */ - acpi_ex_exit_interpreter(); status = acpi_ns_load_table(table_index, parent_node); - acpi_ex_enter_interpreter(); if (ACPI_FAILURE(status)) { acpi_ut_remove_reference(obj_desc); *ddb_handle = NULL; diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index 1783cd7..f631a47 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -47,7 +47,6 @@ #include "acparser.h" #include "acdispat.h" #include "actables.h" -#include "acinterp.h" #define _COMPONENT ACPI_NAMESPACE ACPI_MODULE_NAME("nsparse") @@ -171,8 +170,6 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) ACPI_FUNCTION_TRACE(ns_parse_table); - acpi_ex_enter_interpreter(); - /* * AML Parse, pass 1 * @@ -188,7 +185,7 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, start_node); if (ACPI_FAILURE(status)) { - goto error_exit; + return_ACPI_STATUS(status); } /* @@ -204,10 +201,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, start_node); if (ACPI_FAILURE(status)) { - goto error_exit; + return_ACPI_STATUS(status); } -error_exit: - acpi_ex_exit_interpreter(); return_ACPI_STATUS(status); } -- cgit v0.10.2 From 00c611def8748a0a1cf1d31842e49b42dfdb3de1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 11 Jul 2016 16:21:08 +0200 Subject: Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis" Revert commit 3d4b7ae96d81 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) that enabled the execution of module-level AML after loading each table (rather than after all AML tables have been loaded), but overlooked locking issues resulting from that change. Fixes: 3d4b7ae96d81 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) Reported-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 4e4c214..1ff3a76 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -192,7 +192,7 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_do_not_use_xsdt, FALSE); /* * Optionally support group module level code. */ -ACPI_INIT_GLOBAL(u8, acpi_gbl_group_module_level_code, FALSE); +ACPI_INIT_GLOBAL(u8, acpi_gbl_group_module_level_code, TRUE); /* * Optionally use 32-bit FADT addresses if and when there is a conflict -- cgit v0.10.2 From 2c13ce8f6b2f6fd9ba2f9261b1939fc0f62d1307 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 8 Jul 2016 01:39:11 +0300 Subject: posix_cpu_timer: Exit early when process has been reaped Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by: Alexey Dobriyan Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.by Signed-off-by: Thomas Gleixner diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index 1cafba8..39008d7 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -777,6 +777,7 @@ static void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec *itp) timer->it.cpu.expires = 0; sample_to_timespec(timer->it_clock, timer->it.cpu.expires, &itp->it_value); + return; } else { cpu_timer_sample_group(timer->it_clock, p, &now); unlock_task_sighand(p, &flags); -- cgit v0.10.2 From 6d4e56ce977864b0fcd28c61555060e6010aa89b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 11 Jul 2016 09:10:06 -0400 Subject: posix_acl: de-union a_refcount and a_rcu Currently the two are unioned together, but I don't think that's safe. It looks like get_cached_acl could race with the last put in posix_acl_release. get_cached_acl calls atomic_inc_not_zero on a_refcount, but that field could have already been clobbered by call_rcu, and may no longer be zero. Fix this by de-unioning the two fields. Fixes: b8a7a3a66747 (posix_acl: Inode acl caching fixes) Signed-off-by: Jeff Layton Signed-off-by: Al Viro diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index 5b5a80c..c818772 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -43,10 +43,8 @@ struct posix_acl_entry { }; struct posix_acl { - union { - atomic_t a_refcount; - struct rcu_head a_rcu; - }; + atomic_t a_refcount; + struct rcu_head a_rcu; unsigned int a_count; struct posix_acl_entry a_entries[0]; }; -- cgit v0.10.2 From ab58d8cc870ef3f0771c197700441936898d1f1d Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Mon, 11 Jul 2016 19:51:06 +0200 Subject: ALSA: hda - fix use-after-free after module unload register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by: Peter Wu Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e320c44..7c9b06b 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1218,8 +1218,10 @@ static int azx_free(struct azx *chip) if (use_vga_switcheroo(hda)) { if (chip->disabled && hda->probe_continued) snd_hda_unlock_devices(&chip->bus); - if (hda->vga_switcheroo_registered) + if (hda->vga_switcheroo_registered) { vga_switcheroo_unregister_client(chip->pci); + vga_switcheroo_fini_domain_pm_ops(chip->card->dev); + } } if (bus->chip_init) { -- cgit v0.10.2 From f3ea3119ad75dde0ba3e8da4653dbd5a189688e5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 8 Jul 2016 16:42:48 +0100 Subject: bnxt_en: initialize rc to zero to avoid returning garbage rc is not initialized so it can contain garbage if it is not set by the call to bnxt_read_sfp_module_eeprom_info. Ensure garbage is not returned by initializing rc to 0. Signed-off-by: Colin Ian King Acked-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index a38cb04..1b0ae4a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -1591,7 +1591,7 @@ static int bnxt_get_module_eeprom(struct net_device *dev, { struct bnxt *bp = netdev_priv(dev); u16 start = eeprom->offset, length = eeprom->len; - int rc; + int rc = 0; memset(data, 0, eeprom->len); -- cgit v0.10.2 From a612769774a30e4fc143c4cb6395c12573415660 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Fri, 8 Jul 2016 17:52:33 +0200 Subject: udp: prevent bugcheck if filter truncates packet too much If socket filter truncates an udp packet below the length of UDP header in udpv6_queue_rcv_skb() or udp_queue_rcv_skb(), it will trigger a BUG_ON in skb_pull_rcsum(). This BUG_ON (and therefore a system crash if kernel is configured that way) can be easily enforced by an unprivileged user which was reported as CVE-2016-6162. For a reproducer, see http://seclists.org/oss-sec/2016/q3/8 Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Marco Grassi Signed-off-by: Michal Kubecek Acked-by: Eric Dumazet Acked-by: Willem de Bruijn Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ca5e8ea..4aed8fc 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1583,6 +1583,8 @@ int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) if (sk_filter(sk, skb)) goto drop; + if (unlikely(skb->len < sizeof(struct udphdr))) + goto drop; udp_csum_pull_header(skb); if (sk_rcvqueues_full(sk, sk->sk_rcvbuf)) { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 005dc82..acc09705 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -620,6 +620,8 @@ int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) if (sk_filter(sk, skb)) goto drop; + if (unlikely(skb->len < sizeof(struct udphdr))) + goto drop; udp_csum_pull_header(skb); if (sk_rcvqueues_full(sk, sk->sk_rcvbuf)) { -- cgit v0.10.2 From 75ff39ccc1bd5d3c455b6822ab09e533c551f758 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 10 Jul 2016 10:04:02 +0200 Subject: tcp: make challenge acks less predictable Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2") Reported-by: Yue Cao Signed-off-by: Eric Dumazet Suggested-by: Linus Torvalds Cc: Yuchung Cheng Cc: Neal Cardwell Acked-by: Neal Cardwell Acked-by: Yuchung Cheng Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d6c8f4cd0..91868bb 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -87,7 +87,7 @@ int sysctl_tcp_adv_win_scale __read_mostly = 1; EXPORT_SYMBOL(sysctl_tcp_adv_win_scale); /* rfc5961 challenge ack rate limiting */ -int sysctl_tcp_challenge_ack_limit = 100; +int sysctl_tcp_challenge_ack_limit = 1000; int sysctl_tcp_stdurg __read_mostly; int sysctl_tcp_rfc1337 __read_mostly; @@ -3458,7 +3458,7 @@ static void tcp_send_challenge_ack(struct sock *sk, const struct sk_buff *skb) static u32 challenge_timestamp; static unsigned int challenge_count; struct tcp_sock *tp = tcp_sk(sk); - u32 now; + u32 count, now; /* First check our per-socket dupack rate limit. */ if (tcp_oow_rate_limited(sock_net(sk), skb, @@ -3466,13 +3466,18 @@ static void tcp_send_challenge_ack(struct sock *sk, const struct sk_buff *skb) &tp->last_oow_ack_time)) return; - /* Then check the check host-wide RFC 5961 rate limit. */ + /* Then check host-wide RFC 5961 rate limit. */ now = jiffies / HZ; if (now != challenge_timestamp) { + u32 half = (sysctl_tcp_challenge_ack_limit + 1) >> 1; + challenge_timestamp = now; - challenge_count = 0; + WRITE_ONCE(challenge_count, half + + prandom_u32_max(sysctl_tcp_challenge_ack_limit)); } - if (++challenge_count <= sysctl_tcp_challenge_ack_limit) { + count = READ_ONCE(challenge_count); + if (count > 0) { + WRITE_ONCE(challenge_count, count - 1); NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPCHALLENGEACK); tcp_send_ack(sk); } -- cgit v0.10.2 From 80610229ef7b26615dbb6cb6e873709a60bacc9f Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sun, 10 Jul 2016 21:11:55 +0300 Subject: ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user space Vegard Nossum is reporting for a crash in fib_dump_info when nh_dev = NULL and fib_nhs == 1: Pid: 50, comm: netlink.exe Not tainted 4.7.0-rc5+ RIP: 0033:[<00000000602b3d18>] RSP: 0000000062623890 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006261b800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000024 RDI: 000000006245ba00 RBP: 00000000626238f0 R08: 000000000000029c R09: 0000000000000000 R10: 0000000062468038 R11: 000000006245ba00 R12: 000000006245ba00 R13: 00000000625f96c0 R14: 00000000601e16f0 R15: 0000000000000000 Kernel panic - not syncing: Kernel mode fault at addr 0x2e0, ip 0x602b3d18 CPU: 0 PID: 50 Comm: netlink.exe Not tainted 4.7.0-rc5+ #581 Stack: 626238f0 960226a02 00000400 000000fe 62623910 600afca7 62623970 62623a48 62468038 00000018 00000000 00000000 Call Trace: [<602b3e93>] rtmsg_fib+0xd3/0x190 [<602b6680>] fib_table_insert+0x260/0x500 [<602b0e5d>] inet_rtm_newroute+0x4d/0x60 [<60250def>] rtnetlink_rcv_msg+0x8f/0x270 [<60267079>] netlink_rcv_skb+0xc9/0xe0 [<60250d4b>] rtnetlink_rcv+0x3b/0x50 [<60265400>] netlink_unicast+0x1a0/0x2c0 [<60265e47>] netlink_sendmsg+0x3f7/0x470 [<6021dc9a>] sock_sendmsg+0x3a/0x90 [<6021e0d0>] ___sys_sendmsg+0x300/0x360 [<6021fa64>] __sys_sendmsg+0x54/0xa0 [<6021fac0>] SyS_sendmsg+0x10/0x20 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 $ addr2line -e vmlinux -i 0x602b3d18 include/linux/inetdevice.h:222 net/ipv4/fib_semantics.c:1264 Problem happens when RTNH_F_LINKDOWN is provided from user space when creating routes that do not use the flag, catched with netlink fuzzer. Currently, the kernel allows user space to set both flags to nh_flags and fib_flags but this is not intentional, the assumption was that they are not set. Fix this by rejecting both flags with EINVAL. Reported-by: Vegard Nossum Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Julian Anastasov Cc: Andy Gospodarek Cc: Dinesh Dutt Cc: Scott Feldman Reviewed-by: Andy Gospodarek Signed-off-by: David S. Miller diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index d09173b..539fa26 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -479,6 +479,9 @@ static int fib_get_nhs(struct fib_info *fi, struct rtnexthop *rtnh, if (!rtnh_ok(rtnh, remaining)) return -EINVAL; + if (rtnh->rtnh_flags & (RTNH_F_DEAD | RTNH_F_LINKDOWN)) + return -EINVAL; + nexthop_nh->nh_flags = (cfg->fc_flags & ~0xFF) | rtnh->rtnh_flags; nexthop_nh->nh_oif = rtnh->rtnh_ifindex; @@ -1003,6 +1006,9 @@ struct fib_info *fib_create_info(struct fib_config *cfg) if (fib_props[cfg->fc_type].scope > cfg->fc_scope) goto err_inval; + if (cfg->fc_flags & (RTNH_F_DEAD | RTNH_F_LINKDOWN)) + goto err_inval; + #ifdef CONFIG_IP_ROUTE_MULTIPATH if (cfg->fc_mp) { nhs = fib_count_nexthops(cfg->fc_mp, cfg->fc_mp_len); -- cgit v0.10.2 From 779f1edec664a7b32b71f7b4702e085a08d60592 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Mon, 11 Jul 2016 16:51:26 -0400 Subject: sock: ignore SCM_RIGHTS and SCM_CREDENTIALS in __sock_cmsg_send Sergei Trofimovich reported that pulse audio sends SCM_CREDENTIALS as a control message to TCP. Since __sock_cmsg_send does not support SCM_RIGHTS and SCM_CREDENTIALS, it returns an error and hence breaks pulse audio over TCP. SCM_RIGHTS and SCM_CREDENTIALS are sent on the SOL_SOCKET layer but they semantically belong to SOL_UNIX. Since all cmsg-processing functions including sock_cmsg_send ignore control messages of other layers, it is best to ignore SCM_RIGHTS and SCM_CREDENTIALS for consistency (and also for fixing pulse audio over TCP). Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh Reported-by: Sergei Trofimovich Tested-by: Sergei Trofimovich Cc: Eric Dumazet Cc: Willem de Bruijn Signed-off-by: David S. Miller diff --git a/net/core/sock.c b/net/core/sock.c index 08bf97e..b7f1263 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1938,6 +1938,10 @@ int __sock_cmsg_send(struct sock *sk, struct msghdr *msg, struct cmsghdr *cmsg, sockc->tsflags &= ~SOF_TIMESTAMPING_TX_RECORD_MASK; sockc->tsflags |= tsflags; break; + /* SCM_RIGHTS and SCM_CREDENTIALS are semantically in SOL_UNIX. */ + case SCM_RIGHTS: + case SCM_CREDENTIALS: + break; default: return -EINVAL; } -- cgit v0.10.2 From 34ee32c9a5696247be405bb0c21f3d1fc6cb5729 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 11 Jul 2016 19:58:04 -0500 Subject: r8152: Add support for setting pass through MAC address on RTL8153-AD The RTL8153-AD supports a persistent system specific MAC address. This means a device plugged into two different systems with host side support will show different (but persistent) MAC addresses. This information for the system's persistent MAC address is burned in when the system HW is built and available under \_SB.AMAC in the DSDT at runtime. This technology is currently implemented in the Dell TB15 and WD15 Type-C docks. More information is available here: http://www.dell.com/support/article/us/en/04/SLN301147 Signed-off-by: Mario Limonciello Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 419f4ce..63f4018 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -26,6 +26,7 @@ #include #include #include +#include /* Information for net-next */ #define NETNEXT_VERSION "08" @@ -460,6 +461,11 @@ /* SRAM_IMPEDANCE */ #define RX_DRIVING_MASK 0x6000 +/* MAC PASSTHRU */ +#define AD_MASK 0xfee0 +#define EFUSE 0xcfdb +#define PASS_THRU_MASK 0x1 + enum rtl_register_content { _1000bps = 0x10, _100bps = 0x08, @@ -1036,6 +1042,65 @@ out1: return ret; } +/* Devices containing RTL8153-AD can support a persistent + * host system provided MAC address. + * Examples of this are Dell TB15 and Dell WD15 docks + */ +static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa) +{ + acpi_status status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + int ret = -EINVAL; + u32 ocp_data; + unsigned char buf[6]; + + /* test for -AD variant of RTL8153 */ + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + if ((ocp_data & AD_MASK) != 0x1000) + return -ENODEV; + + /* test for MAC address pass-through bit */ + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE); + if ((ocp_data & PASS_THRU_MASK) != 1) + return -ENODEV; + + /* returns _AUXMAC_#AABBCCDDEEFF# */ + status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer); + obj = (union acpi_object *)buffer.pointer; + if (!ACPI_SUCCESS(status)) + return -ENODEV; + if (obj->type != ACPI_TYPE_BUFFER || obj->string.length != 0x17) { + netif_warn(tp, probe, tp->netdev, + "Invalid buffer when reading pass-thru MAC addr: " + "(%d, %d)\n", + obj->type, obj->string.length); + goto amacout; + } + if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 || + strncmp(obj->string.pointer + 0x15, "#", 1) != 0) { + netif_warn(tp, probe, tp->netdev, + "Invalid header when reading pass-thru MAC addr\n"); + goto amacout; + } + ret = hex2bin(buf, obj->string.pointer + 9, 6); + if (!(ret == 0 && is_valid_ether_addr(buf))) { + netif_warn(tp, probe, tp->netdev, + "Invalid MAC when reading pass-thru MAC addr: " + "%d, %pM\n", ret, buf); + ret = -EINVAL; + goto amacout; + } + memcpy(sa->sa_data, buf, 6); + ether_addr_copy(tp->netdev->dev_addr, sa->sa_data); + netif_info(tp, probe, tp->netdev, + "Using pass-thru MAC addr %pM\n", sa->sa_data); + +amacout: + kfree(obj); + return ret; +} + static int set_ethernet_addr(struct r8152 *tp) { struct net_device *dev = tp->netdev; @@ -1044,8 +1109,15 @@ static int set_ethernet_addr(struct r8152 *tp) if (tp->version == RTL_VER_01) ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data); - else - ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data); + else { + /* if this is not an RTL8153-AD, no eFuse mac pass thru set, + * or system doesn't provide valid _SB.AMAC this will be + * be expected to non-zero + */ + ret = vendor_mac_passthru_addr_read(tp, &sa); + if (ret < 0) + ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data); + } if (ret < 0) { netif_err(tp, probe, dev, "Get ether addr fail\n"); -- cgit v0.10.2 From 2d18ac4ba7454a4260473e68be7e485ae71e7948 Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Mon, 11 Jul 2016 16:08:35 -0400 Subject: tipc: extend broadcast link initialization criteria At first contact between two nodes, an endpoint might sometimes have time to send out a LINK_PROTOCOL/STATE packet before it has received the broadcast initialization packet from the peer, i.e., before it has received a valid broadcast packet number to add to the 'bc_ack' field of the protocol message. This means that the peer endpoint will receive a protocol packet with an invalid broadcast acknowledge value of 0. Under unlucky circumstances this may lead to the original, already received acknowledge value being overwritten, so that the whole broadcast link goes stale after a while. We fix this by delaying the setting of the link field 'bc_peer_is_up' until we know that the peer really has received our own broadcast initialization message. The latter is always sent out as the first unicast message on a link, and always with seqeunce number 1. Because of this, we only need to look for a non-zero unicast acknowledge value in the arriving STATE messages, and once that is confirmed we know we are safe and can set the mentioned field. Before this moment, we must ignore all broadcast acknowledges from the peer. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/link.c b/net/tipc/link.c index 67b6ab9..6483dc4 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -1559,7 +1559,12 @@ void tipc_link_bc_sync_rcv(struct tipc_link *l, struct tipc_msg *hdr, if (!msg_peer_node_is_up(hdr)) return; - l->bc_peer_is_up = true; + /* Open when peer ackowledges our bcast init msg (pkt #1) */ + if (msg_ack(hdr)) + l->bc_peer_is_up = true; + + if (!l->bc_peer_is_up) + return; /* Ignore if peers_snd_nxt goes beyond receive window */ if (more(peers_snd_nxt, l->rcv_nxt + l->window)) -- cgit v0.10.2 From a71eb720355c28eaeb2de0c4d960247c69bb2c6f Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Mon, 11 Jul 2016 16:08:36 -0400 Subject: tipc: ensure correct broadcast send buffer release when peer is lost After a new receiver peer has been added to the broadcast transmission link, we allow immediate transmission of new broadcast packets, trusting that the new peer will not accept the packets until it has received the previously sent unicast broadcast initialiation message. In the same way, the sender must not accept any acknowledges until it has itself received the broadcast initialization from the peer, as well as confirmation of the reception of its own initialization message. Furthermore, when a receiver peer goes down, the sender has to produce the missing acknowledges from the lost peer locally, in order ensure correct release of the buffers that were expected to be acknowledged by the said peer. In a highly stressed system we have observed that contact with a peer may come up and be lost before the above mentioned broadcast initial- ization and confirmation have been received. This leads to the locally produced acknowledges being rejected, and the non-acknowledged buffers to linger in the broadcast link transmission queue until it fills up and the link goes into permanent congestion. In this commit, we remedy this by temporarily setting the corresponding broadcast receive link state to ESTABLISHED and the 'bc_peer_is_up' state to true before we issue the local acknowledges. This ensures that those acknowledges will always be accepted. The mentioned state values are restored immediately afterwards when the link is reset. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/link.c b/net/tipc/link.c index 6483dc4..7d89f87 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -349,6 +349,8 @@ void tipc_link_remove_bc_peer(struct tipc_link *snd_l, u16 ack = snd_l->snd_nxt - 1; snd_l->ackers--; + rcv_l->bc_peer_is_up = true; + rcv_l->state = LINK_ESTABLISHED; tipc_link_bc_ack_rcv(rcv_l, ack, xmitq); tipc_link_reset(rcv_l); rcv_l->state = LINK_RESET; -- cgit v0.10.2 From 1fc07f3e1541cc49cc159beb3fdefc5013570eda Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Mon, 11 Jul 2016 16:08:37 -0400 Subject: tipc: reset all unicast links when broadcast send link fails In test situations with many nodes and a heavily stressed system we have observed that the transmission broadcast link may fail due to an excessive number of retransmissions of the same packet. In such situations we need to reset all unicast links to all peers, in order to reset and re-synchronize the broadcast link. In this commit, we add a new function tipc_bearer_reset_all() to be used in such situations. The function scans across all bearers and resets all their pertaining links. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c index bf8f05c..a597708 100644 --- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -330,6 +330,21 @@ static int tipc_reset_bearer(struct net *net, struct tipc_bearer *b) return 0; } +/* tipc_bearer_reset_all - reset all links on all bearers + */ +void tipc_bearer_reset_all(struct net *net) +{ + struct tipc_net *tn = tipc_net(net); + struct tipc_bearer *b; + int i; + + for (i = 0; i < MAX_BEARERS; i++) { + b = rcu_dereference_rtnl(tn->bearer_list[i]); + if (b) + tipc_reset_bearer(net, b); + } +} + /** * bearer_disable * diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h index f686e41..60e49c3 100644 --- a/net/tipc/bearer.h +++ b/net/tipc/bearer.h @@ -198,6 +198,7 @@ void tipc_bearer_add_dest(struct net *net, u32 bearer_id, u32 dest); void tipc_bearer_remove_dest(struct net *net, u32 bearer_id, u32 dest); struct tipc_bearer *tipc_bearer_find(struct net *net, const char *name); struct tipc_media *tipc_media_find(const char *name); +void tipc_bearer_reset_all(struct net *net); int tipc_bearer_setup(void); void tipc_bearer_cleanup(void); void tipc_bearer_stop(struct net *net); diff --git a/net/tipc/node.c b/net/tipc/node.c index e01e2c71..23d4761 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -1297,10 +1297,6 @@ static void tipc_node_bc_rcv(struct net *net, struct sk_buff *skb, int bearer_id rc = tipc_bcast_rcv(net, be->link, skb); - /* Broadcast link reset may happen at reassembly failure */ - if (rc & TIPC_LINK_DOWN_EVT) - tipc_node_reset_links(n); - /* Broadcast ACKs are sent on a unicast link */ if (rc & TIPC_LINK_SND_BC_ACK) { tipc_node_read_lock(n); @@ -1320,6 +1316,17 @@ static void tipc_node_bc_rcv(struct net *net, struct sk_buff *skb, int bearer_id spin_unlock_bh(&be->inputq2.lock); tipc_sk_mcast_rcv(net, &be->arrvq, &be->inputq2); } + + if (rc & TIPC_LINK_DOWN_EVT) { + /* Reception reassembly failure => reset all links to peer */ + if (!tipc_link_is_up(be->link)) + tipc_node_reset_links(n); + + /* Retransmission failure => reset all links to all peers */ + if (!tipc_link_is_up(tipc_bc_sndlink(net))) + tipc_bearer_reset_all(net); + } + tipc_node_put(n); } -- cgit v0.10.2 From d716fb03f76411fc7e138692e33b749cada5c094 Mon Sep 17 00:00:00 2001 From: Awais Belal Date: Tue, 12 Jul 2016 15:21:28 +0500 Subject: ALSA: hda: add AMD Stoney PCI ID with proper driver caps This allows the device to correctly show up as ATI HDMI rather than a generic one and allows the driver to use the available caps. Signed-off-by: Awais Belal Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7c9b06b..6f8ea13 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2269,6 +2269,8 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, { PCI_DEVICE(0x1002, 0x157a), .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, + { PCI_DEVICE(0x1002, 0x15b3), + .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS }, { PCI_DEVICE(0x1002, 0x793b), .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, { PCI_DEVICE(0x1002, 0x7919), -- cgit v0.10.2 From 590b52e10d410e1439ae86be9fe19d75fdab628b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 11 Jul 2016 17:28:54 +0200 Subject: netfilter: conntrack: skip clash resolution if nat is in place The clash resolution is not easy to apply if the NAT table is registered. Even if no NAT rules are installed, the nul-binding ensures that a unique tuple is used, thus, the packet that loses race gets a different source port number, as described by: http://marc.info/?l=netfilter-devel&m=146818011604484&w=2 Clash resolution with NAT is also problematic if addresses/port range ports are used since the conntrack that wins race may describe a different mangling that we may have earlier applied to the packet via nf_nat_setup_info(). Fixes: 71d8c47fc653 ("netfilter: conntrack: introduce clash resolution on insertion race") Signed-off-by: Pablo Neira Ayuso Tested-by: Marc Dionne diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 62c42e9..9f530ad 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -646,6 +646,7 @@ static int nf_ct_resolve_clash(struct net *net, struct sk_buff *skb, l4proto = __nf_ct_l4proto_find(nf_ct_l3num(ct), nf_ct_protonum(ct)); if (l4proto->allow_clash && + !nfct_nat(ct) && !nf_ct_is_dying(ct) && atomic_inc_not_zero(&ct->ct_general.use)) { nf_ct_acct_merge(ct, ctinfo, (struct nf_conn *)skb->nfct); -- cgit v0.10.2 From 896ce45da2c2f4abc508d443fdecde7de0b3fa7e Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 1 Jul 2016 15:57:02 -0700 Subject: IB/hfi1: Correct issues with sc5 computation There are several computatations of the sc in the ud receive routine. Besides the code duplication, all are wrong when the sc is greater than 15. In that case the code incorrectly or's a 1 into the computed sc instead of 1 shifted left by 4. Fix precomputed sc5 by using an already implemented routine hdr2sc() and deleting flawed duplicated code. Cc: Stable # 4.6+ Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c index 1e503ad..be91f6f 100644 --- a/drivers/infiniband/hw/hfi1/ud.c +++ b/drivers/infiniband/hw/hfi1/ud.c @@ -678,8 +678,7 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) u32 tlen = packet->tlen; struct rvt_qp *qp = packet->qp; bool has_grh = rcv_flags & HFI1_HAS_GRH; - bool sc4_bit = has_sc4_bit(packet); - u8 sc; + u8 sc5 = hdr2sc((struct hfi1_message_header *)hdr, packet->rhf); u32 bth1; int is_mcast; struct ib_grh *grh = NULL; @@ -697,10 +696,8 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) */ struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); u32 lqpn = be32_to_cpu(ohdr->bth[1]) & RVT_QPN_MASK; - u8 sl, sc5; + u8 sl; - sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; - sc5 |= sc4_bit; sl = ibp->sc_to_sl[sc5]; process_becn(ppd, sl, 0, lqpn, 0, IB_CC_SVCTYPE_UD); @@ -717,10 +714,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) if (!is_mcast && (opcode != IB_OPCODE_CNP) && bth1 & HFI1_FECN_SMASK) { u16 slid = be16_to_cpu(hdr->lrh[3]); - u8 sc5; - - sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; - sc5 |= sc4_bit; return_cnp(ibp, qp, src_qp, pkey, dlid, slid, sc5, grh); } @@ -745,10 +738,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) if (qp->ibqp.qp_num > 1) { struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); u16 slid; - u8 sc5; - - sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; - sc5 |= sc4_bit; slid = be16_to_cpu(hdr->lrh[3]); if (unlikely(rcv_pkey_check(ppd, pkey, sc5, slid))) { @@ -790,10 +779,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) /* Received on QP0, and so by definition, this is an SMP */ struct opa_smp *smp = (struct opa_smp *)data; u16 slid = be16_to_cpu(hdr->lrh[3]); - u8 sc5; - - sc5 = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; - sc5 |= sc4_bit; if (opa_smp_check(ibp, pkey, sc5, qp, slid, smp)) goto drop; @@ -890,9 +875,7 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) } wc.slid = be16_to_cpu(hdr->lrh[3]); - sc = (be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf; - sc |= sc4_bit; - wc.sl = ibp->sc_to_sl[sc]; + wc.sl = ibp->sc_to_sl[sc5]; /* * Save the LMC lower bits if the destination LID is a unicast LID. -- cgit v0.10.2 From 98f179a5eaf77eaac49df3d0c217c6eaaba8c0db Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Wed, 6 Jul 2016 17:14:47 -0400 Subject: IB/hfi1: Fix sleep inside atomic issue in init_asic_data The critical section should protect only the list traversal and dd->asic_data modification, not the memory allocation. The fix pulls the allocation out of the critical section. Reviewed-by: Dennis Dalessandro Reviewed-by: Sebastian Sanchez Reviewed-by: Dean Luick Signed-off-by: Tadeusz Struk Signed-off-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index f5de851..dad4d0e 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -14113,8 +14113,14 @@ static int init_asic_data(struct hfi1_devdata *dd) { unsigned long flags; struct hfi1_devdata *tmp, *peer = NULL; + struct hfi1_asic_data *asic_data; int ret = 0; + /* pre-allocate the asic structure in case we are the first device */ + asic_data = kzalloc(sizeof(*dd->asic_data), GFP_KERNEL); + if (!asic_data) + return -ENOMEM; + spin_lock_irqsave(&hfi1_devs_lock, flags); /* Find our peer device */ list_for_each_entry(tmp, &hfi1_dev_list, list) { @@ -14126,18 +14132,14 @@ static int init_asic_data(struct hfi1_devdata *dd) } if (peer) { + /* use already allocated structure */ dd->asic_data = peer->asic_data; + kfree(asic_data); } else { - dd->asic_data = kzalloc(sizeof(*dd->asic_data), GFP_KERNEL); - if (!dd->asic_data) { - ret = -ENOMEM; - goto done; - } + dd->asic_data = asic_data; mutex_init(&dd->asic_data->asic_resource_mutex); } dd->asic_data->dds[dd->hfi1_id] = dd; /* self back-pointer */ - -done: spin_unlock_irqrestore(&hfi1_devs_lock, flags); return ret; } -- cgit v0.10.2 From c5a81d11d756bfa2b7215463b5908006871bd4fa Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 8 Jul 2016 10:27:42 -0500 Subject: IB core: Add port_xmit_wait counter Add the missing port_xmit_wait counter. This counter is displayed through some tools like perfquery but is not available via sysfs. For the PORT_PMA_ATTR macro the _counter field is set to zero allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT See also the earlier work in 2008 by Vladimir Skolovsky https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.html Signed-off-by: Vladimir Sokolvsky Signed-off-by: Christoph Lameter Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index a5793c8..60df4f8 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -530,6 +530,7 @@ static PORT_PMA_ATTR(port_xmit_data , 12, 32, 192); static PORT_PMA_ATTR(port_rcv_data , 13, 32, 224); static PORT_PMA_ATTR(port_xmit_packets , 14, 32, 256); static PORT_PMA_ATTR(port_rcv_packets , 15, 32, 288); +static PORT_PMA_ATTR(port_xmit_wait , 0, 32, 320); /* * Counters added by extended set @@ -560,6 +561,7 @@ static struct attribute *pma_attrs[] = { &port_pma_attr_port_rcv_data.attr.attr, &port_pma_attr_port_xmit_packets.attr.attr, &port_pma_attr_port_rcv_packets.attr.attr, + &port_pma_attr_port_xmit_wait.attr.attr, NULL }; @@ -579,6 +581,7 @@ static struct attribute *pma_attrs_ext[] = { &port_pma_attr_ext_port_xmit_data.attr.attr, &port_pma_attr_ext_port_rcv_data.attr.attr, &port_pma_attr_ext_port_xmit_packets.attr.attr, + &port_pma_attr_port_xmit_wait.attr.attr, &port_pma_attr_ext_port_rcv_packets.attr.attr, &port_pma_attr_ext_unicast_rcv_packets.attr.attr, &port_pma_attr_ext_unicast_xmit_packets.attr.attr, @@ -604,6 +607,7 @@ static struct attribute *pma_attrs_noietf[] = { &port_pma_attr_ext_port_rcv_data.attr.attr, &port_pma_attr_ext_port_xmit_packets.attr.attr, &port_pma_attr_ext_port_rcv_packets.attr.attr, + &port_pma_attr_port_xmit_wait.attr.attr, NULL }; -- cgit v0.10.2 From b0548cff99ba927730d4f0c306b98cb6b6aa7cf7 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sat, 25 Jun 2016 17:55:07 +0200 Subject: i40iw: do not print unitialized variables in error message i40iw_create_cqp() printed the contents of variables maj_err and min_err in an error message before they could be initialized (by calling dev->cqp_ops->cqp_create). Signed-off-by: Nicolas Iooss Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/i40iw/i40iw_main.c b/drivers/infiniband/hw/i40iw/i40iw_main.c index c963cad..6e90813 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_main.c +++ b/drivers/infiniband/hw/i40iw/i40iw_main.c @@ -600,8 +600,7 @@ static enum i40iw_status_code i40iw_create_cqp(struct i40iw_device *iwdev) cqp_init_info.scratch_array = cqp->scratch_array; status = dev->cqp_ops->cqp_init(dev->cqp, &cqp_init_info); if (status) { - i40iw_pr_err("cqp init status %d maj_err %d min_err %d\n", - status, maj_err, min_err); + i40iw_pr_err("cqp init status %d\n", status); goto exit; } status = dev->cqp_ops->cqp_create(dev->cqp, true, &maj_err, &min_err); -- cgit v0.10.2 From 8e0e7aedadb877d91a6e66611464165c969bc0a9 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Mon, 27 Jun 2016 16:52:14 -0500 Subject: i40iw: Enable remote access rights for stag allocation Fix to enable remote access rights when allocating stag. Fixes: b7aee855d3b9 ("RDMA/i40iw: Add base memory management extensions") Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 33959ed..283b64c 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -1474,6 +1474,7 @@ static int i40iw_hw_alloc_stag(struct i40iw_device *iwdev, struct i40iw_mr *iwmr info->stag_idx = iwmr->stag >> I40IW_CQPSQ_STAG_IDX_SHIFT; info->pd_id = iwpd->sc_pd.pd_id; info->total_len = iwmr->length; + info->remote_access = true; cqp_info->cqp_cmd = OP_ALLOC_STAG; cqp_info->post_sq = 1; cqp_info->in.u.alloc_stag.dev = &iwdev->sc_dev; -- cgit v0.10.2 From 136ab0d0e10f29bdac3ee04bd0e9661073e15c80 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 12 Jul 2016 16:01:11 +0300 Subject: net: nps_enet: Fix PCS reset During commit b54b8c2d6e3c ("net: ezchip: adapt driver to little endian architecture") adapting to little endian architecture, zeroing of controller was left out. Signed-off-by: Elad Kanfi Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 06f0317..9b7a3f5 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -285,6 +285,7 @@ static void nps_enet_hw_reset(struct net_device *ndev) ge_rst_value |= NPS_ENET_ENABLE << RST_GMAC_0_SHIFT; nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); usleep_range(10, 20); + ge_rst_value = 0; nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); /* Tx fifo reset sequence */ -- cgit v0.10.2 From 386512d18b268c6182903239f9f3390f03ce4c7b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 12 Jul 2016 16:04:35 -0700 Subject: net: ethoc: Fix early error paths In case any operation fails before we can successfully go the point where we would register a MDIO bus, we would be going to an error label which involves unregistering then freeing this yet to be created MDIO bus. Update all error paths to go to label free which is the only one valid until either the clock is enabled, or the MDIO bus is allocated and registered. This fixes kernel oops observed while trying to dereference the MDIO bus structure which is not yet allocated. Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 4edb98c..06ae14a 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -1086,7 +1086,7 @@ static int ethoc_probe(struct platform_device *pdev) if (!priv->iobase) { dev_err(&pdev->dev, "cannot remap I/O memory space\n"); ret = -ENXIO; - goto error; + goto free; } if (netdev->mem_end) { @@ -1095,7 +1095,7 @@ static int ethoc_probe(struct platform_device *pdev) if (!priv->membase) { dev_err(&pdev->dev, "cannot remap memory space\n"); ret = -ENXIO; - goto error; + goto free; } } else { /* Allocate buffer memory */ @@ -1106,7 +1106,7 @@ static int ethoc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot allocate %dB buffer\n", buffer_size); ret = -ENOMEM; - goto error; + goto free; } netdev->mem_end = netdev->mem_start + buffer_size; priv->dma_alloc = buffer_size; @@ -1120,7 +1120,7 @@ static int ethoc_probe(struct platform_device *pdev) 128, (netdev->mem_end - netdev->mem_start + 1) / ETHOC_BUFSIZ); if (num_bd < 4) { ret = -ENODEV; - goto error; + goto free; } priv->num_bd = num_bd; /* num_tx must be a power of two */ @@ -1133,7 +1133,7 @@ static int ethoc_probe(struct platform_device *pdev) priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void *), GFP_KERNEL); if (!priv->vma) { ret = -ENOMEM; - goto error; + goto free; } /* Allow the platform setup code to pass in a MAC address. */ -- cgit v0.10.2 From ee6c21b9c11ad96318160f9a504a3fac2114ddca Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 12 Jul 2016 16:04:36 -0700 Subject: net: ethoc: Correctly pad short packets Even though the hardware can be doing zero padding, we want the SKB to be going out on the wire with the appropriate size. This fixes packet truncations observed with e.g: ARP packets. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 06ae14a..4466a11 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -860,6 +860,11 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int entry; void *dest; + if (skb_put_padto(skb, ETHOC_ZLEN)) { + dev->stats.tx_errors++; + goto out_no_free; + } + if (unlikely(skb->len > ETHOC_BUFSIZ)) { dev->stats.tx_errors++; goto out; @@ -894,6 +899,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_tx_timestamp(skb); out: dev_kfree_skb(skb); +out_no_free: return NETDEV_TX_OK; } -- cgit v0.10.2 From a7c734140aa36413944eef0f8c660e0e2256357d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 12 Jul 2016 21:59:23 +0200 Subject: cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble Xiaolong Ye reported lock debug warnings triggered by the following commit: 8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine") The bug is the following: the cpuhp_bp_states[] array is cut short when CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless and happily scribble outside of the array bounds... We need to store them in case that the state is unregistered so we can invoke the teardown function. That's independent of CONFIG_SMP. Make sure the array is large enough. Reported-by: kernel test robot Signed-off-by: Thomas Gleixner Cc: Adam Borowski Cc: Alexander Shishkin Cc: Anna-Maria Gleixner Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Stephane Eranian Cc: Vince Weaver Cc: lkp@01.org Cc: stable@vger.kernel.org Cc: tipbuild@zytor.com Fixes: cff7d378d3fd "cpu/hotplug: Convert to a state machine for the control processor" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanos Signed-off-by: Ingo Molnar diff --git a/kernel/cpu.c b/kernel/cpu.c index d948e44..7b61887 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -1201,6 +1201,8 @@ static struct cpuhp_step cpuhp_bp_states[] = { .teardown = takedown_cpu, .cant_stop = true, }, +#else + [CPUHP_BRINGUP_CPU] = { }, #endif }; -- cgit v0.10.2 From d60585c5766e9620d5d83e2b25dc042c7bdada2c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 12 Jul 2016 18:33:56 +0200 Subject: sched/core: Correct off by one bug in load migration calculation The move of calc_load_migrate() from CPU_DEAD to CPU_DYING did not take into account that the function is now called from a thread running on the outgoing CPU. As a result a cpu unplug leakes a load of 1 into the global load accounting mechanism. Fix it by adjusting for the currently running thread which calls calc_load_migrate(). Reported-by: Anton Blanchard Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Michael Ellerman Cc: Vaidyanathan Srinivasan Cc: rt@linutronix.de Cc: shreyas@linux.vnet.ibm.com Fixes: e9cd8fa4fcfd: ("sched/migration: Move calc_load_migrate() into CPU_DYING") Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607121744350.4083@nanos Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 51d7105..97ee9ac 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5394,13 +5394,15 @@ void idle_task_exit(void) /* * Since this CPU is going 'away' for a while, fold any nr_active delta * we might have. Assumes we're called after migrate_tasks() so that the - * nr_active count is stable. + * nr_active count is stable. We need to take the teardown thread which + * is calling this into account, so we hand in adjust = 1 to the load + * calculation. * * Also see the comment "Global load-average calculations". */ static void calc_load_migrate(struct rq *rq) { - long delta = calc_load_fold_active(rq); + long delta = calc_load_fold_active(rq, 1); if (delta) atomic_long_add(delta, &calc_load_tasks); } diff --git a/kernel/sched/loadavg.c b/kernel/sched/loadavg.c index b0b93fd..a2d6eb7 100644 --- a/kernel/sched/loadavg.c +++ b/kernel/sched/loadavg.c @@ -78,11 +78,11 @@ void get_avenrun(unsigned long *loads, unsigned long offset, int shift) loads[2] = (avenrun[2] + offset) << shift; } -long calc_load_fold_active(struct rq *this_rq) +long calc_load_fold_active(struct rq *this_rq, long adjust) { long nr_active, delta = 0; - nr_active = this_rq->nr_running; + nr_active = this_rq->nr_running - adjust; nr_active += (long)this_rq->nr_uninterruptible; if (nr_active != this_rq->calc_load_active) { @@ -188,7 +188,7 @@ void calc_load_enter_idle(void) * We're going into NOHZ mode, if there's any pending delta, fold it * into the pending idle delta. */ - delta = calc_load_fold_active(this_rq); + delta = calc_load_fold_active(this_rq, 0); if (delta) { int idx = calc_load_write_idx(); @@ -389,7 +389,7 @@ void calc_global_load_tick(struct rq *this_rq) if (time_before(jiffies, this_rq->calc_load_update)) return; - delta = calc_load_fold_active(this_rq); + delta = calc_load_fold_active(this_rq, 0); if (delta) atomic_long_add(delta, &calc_load_tasks); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 7cbeb92..898c0d2 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -28,7 +28,7 @@ extern unsigned long calc_load_update; extern atomic_long_t calc_load_tasks; extern void calc_global_load_tick(struct rq *this_rq); -extern long calc_load_fold_active(struct rq *this_rq); +extern long calc_load_fold_active(struct rq *this_rq, long adjust); #ifdef CONFIG_SMP extern void cpu_load_update_active(struct rq *this_rq); -- cgit v0.10.2 From 2c1ccc993707ecb0830ef0aebb7c8061f7704aa3 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Wed, 13 Jul 2016 00:06:59 +0300 Subject: net/mlx5e: Fix TX Timeout to detect queues stuck on BQL Change netif_tx_queue_stopped to netif_xmit_stopped. This will show when queues are stopped due to byte queue limits. Fixes: 3947ca185999 ('net/mlx5e: Implement ndo_tx_timeout callback') Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 7a0dca2..0cebc7e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2656,7 +2656,7 @@ static void mlx5e_tx_timeout(struct net_device *dev) for (i = 0; i < priv->params.num_channels * priv->params.num_tc; i++) { struct mlx5e_sq *sq = priv->txq_to_sq_map[i]; - if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, i))) + if (!netif_xmit_stopped(netdev_get_tx_queue(dev, i))) continue; sched_work = true; set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); -- cgit v0.10.2 From c3b7c5c9504348e0c22fa47629c419d82c963bc2 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Wed, 13 Jul 2016 00:07:00 +0300 Subject: net/mlx5e: start/stop all tx queues upon open/close netdev Start all tx queues (including inactive ones) when opening the netdev. Stop all tx queues (including inactive ones) when closing the netdev. This is a workaround for the tx timeout watchdog false alarm issue in which the netdev watchdog is polling all the tx queues which may include inactive queues and thus once lowering the real tx queues number (ethtool -L) it will generate tx timeout watchdog false alarms. Fixes: 3947ca185999 ('net/mlx5e: Implement ndo_tx_timeout callback') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 0cebc7e..5a4d88c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1348,6 +1348,11 @@ static int mlx5e_open_channels(struct mlx5e_priv *priv) goto err_close_channels; } + /* FIXME: This is a W/A for tx timeout watch dog false alarm when + * polling for inactive tx queues. + */ + netif_tx_start_all_queues(priv->netdev); + kfree(cparam); return 0; @@ -1367,6 +1372,12 @@ static void mlx5e_close_channels(struct mlx5e_priv *priv) { int i; + /* FIXME: This is a W/A only for tx timeout watch dog false alarm when + * polling for inactive tx queues. + */ + netif_tx_stop_all_queues(priv->netdev); + netif_tx_disable(priv->netdev); + for (i = 0; i < priv->params.num_channels; i++) mlx5e_close_channel(priv->channel[i]); -- cgit v0.10.2 From f4979fcea7fd36d8e2f556abef86f80e0d5af1ba Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 12 Jul 2016 18:18:56 -0400 Subject: rose: limit sk_filter trim to payload Sockets can have a filter program attached that drops or trims incoming packets based on the filter program return value. Rose requires data packets to have at least ROSE_MIN_LEN bytes. It verifies this on arrival in rose_route_frame and unconditionally pulls the bytes in rose_recvmsg. The filter can trim packets to below this value in-between, causing pull to fail, leaving the partial header at the time of skb_copy_datagram_msg. Place a lower bound on the size to which sk_filter may trim packets by introducing sk_filter_trim_cap and call this for rose packets. Signed-off-by: Willem de Bruijn Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/include/linux/filter.h b/include/linux/filter.h index 6fc31ef..8f74f3d 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -467,7 +467,11 @@ static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) } #endif /* CONFIG_DEBUG_SET_MODULE_RONX */ -int sk_filter(struct sock *sk, struct sk_buff *skb); +int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); +static inline int sk_filter(struct sock *sk, struct sk_buff *skb) +{ + return sk_filter_trim_cap(sk, skb, 1); +} struct bpf_prog *bpf_prog_select_runtime(struct bpf_prog *fp, int *err); void bpf_prog_free(struct bpf_prog *fp); diff --git a/net/core/filter.c b/net/core/filter.c index c4b330c..e759d90 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -53,9 +53,10 @@ #include /** - * sk_filter - run a packet through a socket filter + * sk_filter_trim_cap - run a packet through a socket filter * @sk: sock associated with &sk_buff * @skb: buffer to filter + * @cap: limit on how short the eBPF program may trim the packet * * Run the eBPF program and then cut skb->data to correct size returned by * the program. If pkt_len is 0 we toss packet. If skb->len is smaller @@ -64,7 +65,7 @@ * be accepted or -EPERM if the packet should be tossed. * */ -int sk_filter(struct sock *sk, struct sk_buff *skb) +int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap) { int err; struct sk_filter *filter; @@ -85,14 +86,13 @@ int sk_filter(struct sock *sk, struct sk_buff *skb) filter = rcu_dereference(sk->sk_filter); if (filter) { unsigned int pkt_len = bpf_prog_run_save_cb(filter->prog, skb); - - err = pkt_len ? pskb_trim(skb, pkt_len) : -EPERM; + err = pkt_len ? pskb_trim(skb, max(cap, pkt_len)) : -EPERM; } rcu_read_unlock(); return err; } -EXPORT_SYMBOL(sk_filter); +EXPORT_SYMBOL(sk_filter_trim_cap); static u64 __skb_get_pay_offset(u64 ctx, u64 a, u64 x, u64 r4, u64 r5) { diff --git a/net/rose/rose_in.c b/net/rose/rose_in.c index 79c4abc..0a63947 100644 --- a/net/rose/rose_in.c +++ b/net/rose/rose_in.c @@ -164,7 +164,8 @@ static int rose_state3_machine(struct sock *sk, struct sk_buff *skb, int framety rose_frames_acked(sk, nr); if (ns == rose->vr) { rose_start_idletimer(sk); - if (sock_queue_rcv_skb(sk, skb) == 0) { + if (sk_filter_trim_cap(sk, skb, ROSE_MIN_LEN) == 0 && + __sock_queue_rcv_skb(sk, skb) == 0) { rose->vr = (rose->vr + 1) % ROSE_MODULUS; queued = 1; } else { -- cgit v0.10.2 From 4f0c40d94461cfd23893a17335b2ab78ecb333c8 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 12 Jul 2016 18:18:57 -0400 Subject: dccp: limit sk_filter trim to payload Dccp verifies packet integrity, including length, at initial rcv in dccp_invalid_packet, later pulls headers in dccp_enqueue_skb. A call to sk_filter in-between can cause __skb_pull to wrap skb->len. skb_copy_datagram_msg interprets this as a negative value, so (correctly) fails with EFAULT. The negative length is reported in ioctl SIOCINQ or possibly in a DCCP_WARN in dccp_close. Introduce an sk_receive_skb variant that caps how small a filter program can trim packets, and call this in dccp with the header length. Excessively trimmed packets are now processed normally and queued for reception as 0B payloads. Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Signed-off-by: Willem de Bruijn Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/include/net/sock.h b/include/net/sock.h index 649d2a8..ff5be7e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1576,7 +1576,13 @@ static inline void sock_put(struct sock *sk) */ void sock_gen_put(struct sock *sk); -int sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested); +int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested, + unsigned int trim_cap); +static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb, + const int nested) +{ + return __sk_receive_skb(sk, skb, nested, 1); +} static inline void sk_tx_queue_set(struct sock *sk, int tx_queue) { diff --git a/net/core/sock.c b/net/core/sock.c index b7f1263..25dab8b 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -452,11 +452,12 @@ int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) } EXPORT_SYMBOL(sock_queue_rcv_skb); -int sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested) +int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, + const int nested, unsigned int trim_cap) { int rc = NET_RX_SUCCESS; - if (sk_filter(sk, skb)) + if (sk_filter_trim_cap(sk, skb, trim_cap)) goto discard_and_relse; skb->dev = NULL; @@ -492,7 +493,7 @@ discard_and_relse: kfree_skb(skb); goto out; } -EXPORT_SYMBOL(sk_receive_skb); +EXPORT_SYMBOL(__sk_receive_skb); struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie) { diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 25dd25b..345a3ae 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -868,7 +868,7 @@ lookup: goto discard_and_relse; nf_reset(skb); - return sk_receive_skb(sk, skb, 1); + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4); no_dccp_socket: if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index d176f4e..3ff137d9 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -732,7 +732,7 @@ lookup: if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; - return sk_receive_skb(sk, skb, 1) ? -1 : 0; + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4) ? -1 : 0; no_dccp_socket: if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) -- cgit v0.10.2 From b19240062722c39fa92c99f04cbfd93034625123 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 11 Jul 2016 14:46:17 +0100 Subject: drm/i915: Update ifdeffery for mutex->owner In commit 7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate") the owner field in the mutex was updated from being dependent upon CONFIG_SMP to using optimistic spin. Update our peek function to suite. Fixes:7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...") Reported-by: Hong Liu Signed-off-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld (cherry picked from commit 4f074a5393431a7d2cc0de7fcfe2f61d24854628) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_shrinker.c b/drivers/gpu/drm/i915/i915_gem_shrinker.c index 425e721..6657146 100644 --- a/drivers/gpu/drm/i915/i915_gem_shrinker.c +++ b/drivers/gpu/drm/i915/i915_gem_shrinker.c @@ -40,7 +40,7 @@ static bool mutex_is_locked_by(struct mutex *mutex, struct task_struct *task) if (!mutex_is_locked(mutex)) return false; -#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_MUTEXES) +#if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_MUTEX_SPIN_ON_OWNER) return mutex->owner == task; #else /* Since UP may be pre-empted, we cannot assume that we own the lock */ -- cgit v0.10.2 From aeddda06c1a704bb97c8a7bfe7a472120193bd56 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 12 Jul 2016 15:00:37 +0300 Subject: drm/i915: Ignore panel type from OpRegion on SKL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dell XPS 13 9350 apparently doesn't like it when we use the panel type from OpRegion. The OpRegion panel type (0) tells us to use use low vswing for eDP, whereas the VBT panel type (2) tells us to use normal vswing. The problem is that low vswing results in some display flickers. Since no one seems to know how this stuff is supposed to be handled, let's just ignore the OpRegion panel type on SKL for now. v2: Print the panel type correctly in the debug output Reported-by: James Bottomley Cc: James Bottomley Cc: drm-intel-fixes@lists.freedesktop.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1468324837-29237-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter Tested-by: James Bottomley Signed-off-by: Ville Syrjälä (cherry picked from commit bb10d4ec3be4b069bfb61c60ca4f708f58f440f1) [danvet: Fix up cherry-pick conflict with an s/dev_priv/dev/.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 99e2603..16e209d 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -1038,5 +1038,16 @@ intel_opregion_get_panel_type(struct drm_device *dev) return -ENODEV; } + /* + * FIXME On Dell XPS 13 9350 the OpRegion panel type (0) gives us + * low vswing for eDP, whereas the VBT panel type (2) gives us normal + * vswing instead. Low vswing results in some display flickers, so + * let's simply ignore the OpRegion panel type on SKL for now. + */ + if (IS_SKYLAKE(dev)) { + DRM_DEBUG_KMS("Ignoring OpRegion panel type (%d)\n", ret - 1); + return -ENODEV; + } + return ret - 1; } -- cgit v0.10.2 From 32f0c4afb4363e31dad49202f1554ba591d649f2 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 13 Jul 2016 11:45:02 -0600 Subject: nvme: Remove RCU namespace protection We can't sleep with RCU read lock held, but we need to do potentially blocking stuff to namespace queues when iterating the list. This patch removes the RCU locking and holds a mutex instead. To prevent deadlocks, this patch removes holding the mutex during namespace scanning and removal. The unlocked namespace scanning is made safe by holding a reference to the namespace being scanned. List iteration that does IO has to be unlocked to allow error recovery. The caller must ensure the list can not be manipulated during such an event, so this patch adds a comment explaining this requirement to the only function that iterates an unlocked list. All callers currently meet this requirement, so no further changes required. List iterations that do not do IO can safely use the lock since it couldn't block recovery from missing forced IO completions. Reported-by: Ming Lin [fixes 0bf77e9 nvme: switch to RCU freeing the namespace] Signed-off-by: Keith Busch Signed-off-by: Jens Axboe diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 1a51584..d5fb55c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1394,19 +1394,22 @@ static int ns_cmp(void *priv, struct list_head *a, struct list_head *b) return nsa->ns_id - nsb->ns_id; } -static struct nvme_ns *nvme_find_ns(struct nvme_ctrl *ctrl, unsigned nsid) +static struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid) { - struct nvme_ns *ns; - - lockdep_assert_held(&ctrl->namespaces_mutex); + struct nvme_ns *ns, *ret = NULL; + mutex_lock(&ctrl->namespaces_mutex); list_for_each_entry(ns, &ctrl->namespaces, list) { - if (ns->ns_id == nsid) - return ns; + if (ns->ns_id == nsid) { + kref_get(&ns->kref); + ret = ns; + break; + } if (ns->ns_id > nsid) break; } - return NULL; + mutex_unlock(&ctrl->namespaces_mutex); + return ret; } static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) @@ -1415,8 +1418,6 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) struct gendisk *disk; int node = dev_to_node(ctrl->dev); - lockdep_assert_held(&ctrl->namespaces_mutex); - ns = kzalloc_node(sizeof(*ns), GFP_KERNEL, node); if (!ns) return; @@ -1457,7 +1458,10 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) if (nvme_revalidate_disk(ns->disk)) goto out_free_disk; - list_add_tail_rcu(&ns->list, &ctrl->namespaces); + mutex_lock(&ctrl->namespaces_mutex); + list_add_tail(&ns->list, &ctrl->namespaces); + mutex_unlock(&ctrl->namespaces_mutex); + kref_get(&ctrl->kref); if (ns->type == NVME_NS_LIGHTNVM) return; @@ -1480,8 +1484,6 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid) static void nvme_ns_remove(struct nvme_ns *ns) { - lockdep_assert_held(&ns->ctrl->namespaces_mutex); - if (test_and_set_bit(NVME_NS_REMOVING, &ns->flags)) return; @@ -1494,8 +1496,11 @@ static void nvme_ns_remove(struct nvme_ns *ns) blk_mq_abort_requeue_list(ns->queue); blk_cleanup_queue(ns->queue); } + + mutex_lock(&ns->ctrl->namespaces_mutex); list_del_init(&ns->list); - synchronize_rcu(); + mutex_unlock(&ns->ctrl->namespaces_mutex); + nvme_put_ns(ns); } @@ -1503,10 +1508,11 @@ static void nvme_validate_ns(struct nvme_ctrl *ctrl, unsigned nsid) { struct nvme_ns *ns; - ns = nvme_find_ns(ctrl, nsid); + ns = nvme_find_get_ns(ctrl, nsid); if (ns) { if (revalidate_disk(ns->disk)) nvme_ns_remove(ns); + nvme_put_ns(ns); } else nvme_alloc_ns(ctrl, nsid); } @@ -1535,9 +1541,11 @@ static int nvme_scan_ns_list(struct nvme_ctrl *ctrl, unsigned nn) nvme_validate_ns(ctrl, nsid); while (++prev < nsid) { - ns = nvme_find_ns(ctrl, prev); - if (ns) + ns = nvme_find_get_ns(ctrl, prev); + if (ns) { nvme_ns_remove(ns); + nvme_put_ns(ns); + } } } nn -= j; @@ -1552,8 +1560,6 @@ static void nvme_scan_ns_sequential(struct nvme_ctrl *ctrl, unsigned nn) struct nvme_ns *ns, *next; unsigned i; - lockdep_assert_held(&ctrl->namespaces_mutex); - for (i = 1; i <= nn; i++) nvme_validate_ns(ctrl, i); @@ -1576,7 +1582,6 @@ static void nvme_scan_work(struct work_struct *work) if (nvme_identify_ctrl(ctrl, &id)) return; - mutex_lock(&ctrl->namespaces_mutex); nn = le32_to_cpu(id->nn); if (ctrl->vs >= NVME_VS(1, 1) && !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) { @@ -1585,6 +1590,7 @@ static void nvme_scan_work(struct work_struct *work) } nvme_scan_ns_sequential(ctrl, nn); done: + mutex_lock(&ctrl->namespaces_mutex); list_sort(NULL, &ctrl->namespaces, ns_cmp); mutex_unlock(&ctrl->namespaces_mutex); kfree(id); @@ -1604,6 +1610,11 @@ void nvme_queue_scan(struct nvme_ctrl *ctrl) } EXPORT_SYMBOL_GPL(nvme_queue_scan); +/* + * This function iterates the namespace list unlocked to allow recovery from + * controller failure. It is up to the caller to ensure the namespace list is + * not modified by scan work while this function is executing. + */ void nvme_remove_namespaces(struct nvme_ctrl *ctrl) { struct nvme_ns *ns, *next; @@ -1617,10 +1628,8 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl) if (ctrl->state == NVME_CTRL_DEAD) nvme_kill_queues(ctrl); - mutex_lock(&ctrl->namespaces_mutex); list_for_each_entry_safe(ns, next, &ctrl->namespaces, list) nvme_ns_remove(ns); - mutex_unlock(&ctrl->namespaces_mutex); } EXPORT_SYMBOL_GPL(nvme_remove_namespaces); @@ -1791,11 +1800,8 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) { struct nvme_ns *ns; - rcu_read_lock(); - list_for_each_entry_rcu(ns, &ctrl->namespaces, list) { - if (!kref_get_unless_zero(&ns->kref)) - continue; - + mutex_lock(&ctrl->namespaces_mutex); + list_for_each_entry(ns, &ctrl->namespaces, list) { /* * Revalidating a dead namespace sets capacity to 0. This will * end buffered writers dirtying pages that can't be synced. @@ -1806,10 +1812,8 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) blk_set_queue_dying(ns->queue); blk_mq_abort_requeue_list(ns->queue); blk_mq_start_stopped_hw_queues(ns->queue, true); - - nvme_put_ns(ns); } - rcu_read_unlock(); + mutex_unlock(&ctrl->namespaces_mutex); } EXPORT_SYMBOL_GPL(nvme_kill_queues); @@ -1817,8 +1821,8 @@ void nvme_stop_queues(struct nvme_ctrl *ctrl) { struct nvme_ns *ns; - rcu_read_lock(); - list_for_each_entry_rcu(ns, &ctrl->namespaces, list) { + mutex_lock(&ctrl->namespaces_mutex); + list_for_each_entry(ns, &ctrl->namespaces, list) { spin_lock_irq(ns->queue->queue_lock); queue_flag_set(QUEUE_FLAG_STOPPED, ns->queue); spin_unlock_irq(ns->queue->queue_lock); @@ -1826,7 +1830,7 @@ void nvme_stop_queues(struct nvme_ctrl *ctrl) blk_mq_cancel_requeue_work(ns->queue); blk_mq_stop_hw_queues(ns->queue); } - rcu_read_unlock(); + mutex_unlock(&ctrl->namespaces_mutex); } EXPORT_SYMBOL_GPL(nvme_stop_queues); @@ -1834,13 +1838,13 @@ void nvme_start_queues(struct nvme_ctrl *ctrl) { struct nvme_ns *ns; - rcu_read_lock(); - list_for_each_entry_rcu(ns, &ctrl->namespaces, list) { + mutex_lock(&ctrl->namespaces_mutex); + list_for_each_entry(ns, &ctrl->namespaces, list) { queue_flag_clear_unlocked(QUEUE_FLAG_STOPPED, ns->queue); blk_mq_start_stopped_hw_queues(ns->queue, true); blk_mq_kick_requeue_list(ns->queue); } - rcu_read_unlock(); + mutex_unlock(&ctrl->namespaces_mutex); } EXPORT_SYMBOL_GPL(nvme_start_queues); -- cgit v0.10.2 From 7ce9ea7e6b35a652034486133174d4e17055cef5 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Tue, 5 Jul 2016 11:32:30 +0200 Subject: mtd: nand: omap2: Add check for old elm binding commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") removes the check for the old elm phandle binding. Add it again to keep backward compatibility. Fixes: commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") Signed-off-by: Teresa Remmet Signed-off-by: Brian Norris diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 08e1588..a136da8 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1657,8 +1657,11 @@ static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info) /* detect availability of ELM module. Won't be present pre-OMAP4 */ info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0); - if (!info->elm_of_node) - dev_dbg(dev, "ti,elm-id not in DT\n"); + if (!info->elm_of_node) { + info->elm_of_node = of_parse_phandle(child, "elm_id", 0); + if (!info->elm_of_node) + dev_dbg(dev, "ti,elm-id not in DT\n"); + } /* select ecc-scheme for NAND */ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) { -- cgit v0.10.2 From 3e9161bfe0482f26efeaf584d5fd69398c69313c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 14 Jul 2016 09:33:41 -0700 Subject: Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE" This reverts commit 5f7e5445a2de848c66d2d80ba5479197e8287c33 because removal of input_mt_report_slot_state() means we no longer generate tracking IDs for the reported contacts. Cc: stable@vger.kernel.org Acked-by: Peter Hutterer Acked-by: Ping Cheng diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 0c9191c..b6fc4bd 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -155,6 +155,7 @@ static void parse_multi_touch(struct w8001 *w8001) bool touch = data[0] & (1 << i); input_mt_slot(dev, i); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch); if (touch) { x = (data[6 * i + 1] << 7) | data[6 * i + 2]; y = (data[6 * i + 3] << 7) | data[6 * i + 4]; @@ -522,6 +523,8 @@ static int w8001_setup_touch(struct w8001 *w8001, char *basename, 0, touch.x, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, touch.y, 0, 0); + input_set_abs_params(dev, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_MAX, 0, 0); strlcat(basename, " 2FG", basename_sz); if (w8001->max_pen_x && w8001->max_pen_y) -- cgit v0.10.2 From 9624516db0f3ffcbd1ba1007775d068f54049773 Mon Sep 17 00:00:00 2001 From: Andrew Duggan Date: Thu, 14 Jul 2016 09:35:44 -0700 Subject: Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcount Calling of_find_node_by_name() assumes that the caller has incremented the refcount of the of_node being passed in. Currently, the caller is not incrementing the refcount of the of_node which results in the node being prematurely freed when of_find_node_by_name() calls of_node_put() on it. Instead use of_get_child_by_name() which does not call put on the of_node. Signed-off-by: Andrew Duggan Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index b368b05..253df96 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -157,11 +157,11 @@ static int rmi_function_match(struct device *dev, struct device_driver *drv) static void rmi_function_of_probe(struct rmi_function *fn) { char of_name[9]; + struct device_node *node = fn->rmi_dev->xport->dev->of_node; snprintf(of_name, sizeof(of_name), "rmi4-f%02x", fn->fd.function_number); - fn->dev.of_node = of_find_node_by_name( - fn->rmi_dev->xport->dev->of_node, of_name); + fn->dev.of_node = of_get_child_by_name(node, of_name); } #else static inline void rmi_function_of_probe(struct rmi_function *fn) -- cgit v0.10.2 From 795c2109c287123dfc3bc987d20daef32d77e4d1 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Thu, 7 Jul 2016 09:56:53 +0800 Subject: drm/amdgpu: Add a missing register to Polaris golden setting Signed-off-by: Ken Wang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index b2ebd4f..42e3031 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -284,6 +284,7 @@ static const u32 golden_settings_polaris11_a11[] = mmTCP_ADDR_CONFIG, 0x000003ff, 0x000000f3, mmTCP_CHAN_STEER_HI, 0xffffffff, 0x00000000, mmTCP_CHAN_STEER_LO, 0xffffffff, 0x00003210, + mmVGT_RESET_DEBUG, 0x00000004, 0x00000004, }; static const u32 polaris11_golden_common_all[] = @@ -314,6 +315,7 @@ static const u32 golden_settings_polaris10_a11[] = mmTCC_CTRL, 0x00100000, 0xf31fff7f, mmTCP_ADDR_CONFIG, 0x000003ff, 0x000000f7, mmTCP_CHAN_STEER_HI, 0xffffffff, 0x00000000, + mmVGT_RESET_DEBUG, 0x00000004, 0x00000004, }; static const u32 polaris10_golden_common_all[] = -- cgit v0.10.2 From eeade25ad029cb1f31f27f8e0ddc9bb9c22b5537 Mon Sep 17 00:00:00 2001 From: Ken Wang Date: Mon, 11 Jul 2016 13:33:40 +0800 Subject: drm/amdgpu: fix power distribution issue for Polaris10 XT Signed-off-by: Ken Wang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_i2c.c b/drivers/gpu/drm/amd/amdgpu/atombios_i2c.c index 13cdb01..bc56c8a 100644 --- a/drivers/gpu/drm/amd/amdgpu/atombios_i2c.c +++ b/drivers/gpu/drm/amd/amdgpu/atombios_i2c.c @@ -156,3 +156,18 @@ u32 amdgpu_atombios_i2c_func(struct i2c_adapter *adap) return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } +void amdgpu_atombios_i2c_channel_trans(struct amdgpu_device* adev, u8 slave_addr, u8 line_number, u8 offset, u8 data) +{ + PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, ProcessI2cChannelTransaction); + + args.ucRegIndex = offset; + args.lpI2CDataOut = data; + args.ucFlag = 1; + args.ucI2CSpeed = TARGET_HW_I2C_CLOCK; + args.ucTransBytes = 1; + args.ucSlaveAddr = slave_addr; + args.ucLineNumber = line_number; + + amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args); +} diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_i2c.h b/drivers/gpu/drm/amd/amdgpu/atombios_i2c.h index d6128d9d..251aaf4 100644 --- a/drivers/gpu/drm/amd/amdgpu/atombios_i2c.h +++ b/drivers/gpu/drm/amd/amdgpu/atombios_i2c.h @@ -27,5 +27,7 @@ int amdgpu_atombios_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num); u32 amdgpu_atombios_i2c_func(struct i2c_adapter *adap); +void amdgpu_atombios_i2c_channel_trans(struct amdgpu_device* adev, + u8 slave_addr, u8 line_number, u8 offset, u8 data); #endif diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 42e3031..c2ef945 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -28,6 +28,7 @@ #include "vid.h" #include "amdgpu_ucode.h" #include "amdgpu_atombios.h" +#include "atombios_i2c.h" #include "clearstate_vi.h" #include "gmc/gmc_8_2_d.h" @@ -698,6 +699,10 @@ static void gfx_v8_0_init_golden_registers(struct amdgpu_device *adev) polaris10_golden_common_all, (const u32)ARRAY_SIZE(polaris10_golden_common_all)); WREG32_SMC(ixCG_ACLK_CNTL, 0x0000001C); + if (adev->pdev->revision == 0xc7) { + amdgpu_atombios_i2c_channel_trans(adev, 0x10, 0x96, 0x1E, 0xDD); + amdgpu_atombios_i2c_channel_trans(adev, 0x10, 0x96, 0x1F, 0xD0); + } break; case CHIP_CARRIZO: amdgpu_program_register_sequence(adev, -- cgit v0.10.2 From 005db31d5f5f7c31cfdc43505d77eb3ca5cf8ec6 Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Wed, 13 Jul 2016 18:25:08 +0200 Subject: bonding: set carrier off for devices created through netlink Commit e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by: Beniamino Galvani Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index db760e8..b8df0f5 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -446,7 +446,11 @@ static int bond_newlink(struct net *src_net, struct net_device *bond_dev, if (err < 0) return err; - return register_netdevice(bond_dev); + err = register_netdevice(bond_dev); + + netif_carrier_off(bond_dev); + + return err; } static size_t bond_get_size(const struct net_device *bond_dev) -- cgit v0.10.2 From a46cbf3bc53b6a93fb84a5ffb288c354fa807954 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 14 Jul 2016 12:06:50 -0700 Subject: mm, compaction: prevent VM_BUG_ON when terminating freeing scanner It's possible to isolate some freepages in a pageblock and then fail split_free_page() due to the low watermark check. In this case, we hit VM_BUG_ON() because the freeing scanner terminated early without a contended lock or enough freepages. This should never have been a VM_BUG_ON() since it's not a fatal condition. It should have been a VM_WARN_ON() at best, or even handled gracefully. Regardless, we need to terminate anytime the full pageblock scan was not done. The logic belongs in isolate_freepages_block(), so handle its state gracefully by terminating the pageblock loop and making a note to restart at the same pageblock next time since it was not possible to complete the scan this time. [rientjes@google.com: don't rescan pages in a pageblock] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.com Signed-off-by: David Rientjes Reported-by: Minchan Kim Tested-by: Minchan Kim Cc: Joonsoo Kim Cc: Hugh Dickins Cc: Mel Gorman Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/compaction.c b/mm/compaction.c index 79bfe0e..7bc0477 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -1009,8 +1009,6 @@ static void isolate_freepages(struct compact_control *cc) block_end_pfn = block_start_pfn, block_start_pfn -= pageblock_nr_pages, isolate_start_pfn = block_start_pfn) { - unsigned long isolated; - /* * This can iterate a massively long zone without finding any * suitable migration targets, so periodically check if we need @@ -1034,36 +1032,30 @@ static void isolate_freepages(struct compact_control *cc) continue; /* Found a block suitable for isolating free pages from. */ - isolated = isolate_freepages_block(cc, &isolate_start_pfn, - block_end_pfn, freelist, false); - /* If isolation failed early, do not continue needlessly */ - if (!isolated && isolate_start_pfn < block_end_pfn && - cc->nr_migratepages > cc->nr_freepages) - break; + isolate_freepages_block(cc, &isolate_start_pfn, block_end_pfn, + freelist, false); /* - * If we isolated enough freepages, or aborted due to async - * compaction being contended, terminate the loop. - * Remember where the free scanner should restart next time, - * which is where isolate_freepages_block() left off. - * But if it scanned the whole pageblock, isolate_start_pfn - * now points at block_end_pfn, which is the start of the next - * pageblock. - * In that case we will however want to restart at the start - * of the previous pageblock. + * If we isolated enough freepages, or aborted due to lock + * contention, terminate. */ if ((cc->nr_freepages >= cc->nr_migratepages) || cc->contended) { - if (isolate_start_pfn >= block_end_pfn) + if (isolate_start_pfn >= block_end_pfn) { + /* + * Restart at previous pageblock if more + * freepages can be isolated next time. + */ isolate_start_pfn = block_start_pfn - pageblock_nr_pages; + } break; - } else { + } else if (isolate_start_pfn < block_end_pfn) { /* - * isolate_freepages_block() should not terminate - * prematurely unless contended, or isolated enough + * If isolation failed early, do not continue + * needlessly. */ - VM_BUG_ON(isolate_start_pfn < block_end_pfn); + break; } } -- cgit v0.10.2 From 2ba78056acfe8d63a29565f91dae4678ed6b81ca Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Thu, 14 Jul 2016 12:06:53 -0700 Subject: kasan: add newline to messages Currently GPF messages with KASAN look as follows: kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Add newlines. Link: http://lkml.kernel.org/r/1467294357-98002-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov Acked-by: Andrey Ryabinin Cc: Alexander Potapenko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c index 1b1110f..0493c17 100644 --- a/arch/x86/mm/kasan_init_64.c +++ b/arch/x86/mm/kasan_init_64.c @@ -54,8 +54,8 @@ static int kasan_die_handler(struct notifier_block *self, void *data) { if (val == DIE_GPF) { - pr_emerg("CONFIG_KASAN_INLINE enabled"); - pr_emerg("GPF could be caused by NULL-ptr deref or user memory access"); + pr_emerg("CONFIG_KASAN_INLINE enabled\n"); + pr_emerg("GPF could be caused by NULL-ptr deref or user memory access\n"); } return NOTIFY_OK; } -- cgit v0.10.2 From abb035b48270b226356552486c6de2b1652bdb90 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Thu, 14 Jul 2016 12:06:55 -0700 Subject: scripts/gdb: silence 'nothing to do' message The constants.py generation, involves a rule to link into the main makefile. This rule has no command and generates a spurious warning message in the build logs when CONFIG_SCRIPTS_GDB is enabled. Fix simply by giving a no-op action Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham Reported-by: Jan Kiszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/gdb/linux/Makefile b/scripts/gdb/linux/Makefile index cd129e6..7a33556 100644 --- a/scripts/gdb/linux/Makefile +++ b/scripts/gdb/linux/Makefile @@ -17,5 +17,6 @@ $(obj)/constants.py: $(SRCTREE)/$(obj)/constants.py.in $(call if_changed,gen_constants_py) build_constants_py: $(obj)/constants.py + @: clean-files := *.pyc *.pyo $(if $(KBUILD_SRC),*.py) $(obj)/constants.py -- cgit v0.10.2 From 834a35296ab0a850e22cda1059e4c05b091c4ad9 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Thu, 14 Jul 2016 12:06:58 -0700 Subject: scripts/gdb: rebuild constants.py on dependancy change The autogenerated constants.py file was only being built on the initial call, and if the constants.py.in file changed. As we are utilising the CPP hooks, we can successfully use the call if_changed_dep rules to determine when to rebuild the file based on it's inclusions. Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham Reported-by: Jan Kiszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/gdb/linux/Makefile b/scripts/gdb/linux/Makefile index 7a33556..8b00031 100644 --- a/scripts/gdb/linux/Makefile +++ b/scripts/gdb/linux/Makefile @@ -13,8 +13,9 @@ quiet_cmd_gen_constants_py = GEN $@ $(CPP) -E -x c -P $(c_flags) $< > $@ ;\ sed -i '1,//d;' $@ -$(obj)/constants.py: $(SRCTREE)/$(obj)/constants.py.in - $(call if_changed,gen_constants_py) +targets += constants.py +$(obj)/constants.py: $(SRCTREE)/$(obj)/constants.py.in FORCE + $(call if_changed_dep,gen_constants_py) build_constants_py: $(obj)/constants.py @: -- cgit v0.10.2 From e2aa2f8face230e284f6d344c6a4ee6f53e60207 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Thu, 14 Jul 2016 12:07:01 -0700 Subject: scripts/gdb: add constants.py to .gitignore Since scripts/gdb/linux/constants.py is autogenerated, this should have been added to .gitignore when it was introduced. Fixes: f197d75fcad1 ("scripts/gdb: provide linux constants") Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyz Signed-off-by: Omar Sandoval Signed-off-by: Kieran Bingham Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/gdb/linux/.gitignore b/scripts/gdb/linux/.gitignore index 52e4e61..2573543 100644 --- a/scripts/gdb/linux/.gitignore +++ b/scripts/gdb/linux/.gitignore @@ -1,2 +1,3 @@ *.pyc *.pyo +constants.py -- cgit v0.10.2 From 552ab2a3eaa4338fa5b33aa4c07ea2c542ddcea5 Mon Sep 17 00:00:00 2001 From: Nikolay Borisov Date: Thu, 14 Jul 2016 12:07:04 -0700 Subject: scripts/gdb: Perform path expansion to lx-symbol's arguments Python doesn't do automatic expansion of paths. In case one passes path of the from ~/foo/bar the gdb scripts won't automatically expand that and as a result the symbols files won't be loaded. Fix this by explicitly expanding all paths which begin with "~" Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz Signed-off-by: Nikolay Borisov Signed-off-by: Kieran Bingham Reviewed-by: Jan Kiszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/gdb/linux/symbols.py b/scripts/gdb/linux/symbols.py index 9a0f892..004b0ac 100644 --- a/scripts/gdb/linux/symbols.py +++ b/scripts/gdb/linux/symbols.py @@ -153,7 +153,7 @@ lx-symbols command.""" saved_state['breakpoint'].enabled = saved_state['enabled'] def invoke(self, arg, from_tty): - self.module_paths = arg.split() + self.module_paths = [os.path.expanduser(p) for p in arg.split()] self.module_paths.append(os.getcwd()) # enforce update -- cgit v0.10.2 From b447e02548a3304c47b78b5e2d75a4312a8f17e1 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Thu, 14 Jul 2016 12:07:06 -0700 Subject: Revert "scripts/gdb: add a Radix Tree Parser" This reverts commit e127a73d41ac ("scripts/gdb: add a Radix Tree Parser") The python implementation of radix-tree was merged at the same time as the radix-tree system was heavily reworked from commit e9256efcc8e3 ("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6c4 ("radix-tree: free up the bottom bit of exceptional entries for reuse") and no longer functions, but also prevents other gdb scripts from loading. This functionality has not yet hit a release, so simply remove it for now Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/gdb/linux/constants.py.in b/scripts/gdb/linux/constants.py.in index 07e6c2b..7986f4e 100644 --- a/scripts/gdb/linux/constants.py.in +++ b/scripts/gdb/linux/constants.py.in @@ -14,7 +14,6 @@ #include #include -#include /* We need to stringify expanded macros so that they can be parsed */ @@ -51,9 +50,3 @@ LX_VALUE(MNT_NOEXEC) LX_VALUE(MNT_NOATIME) LX_VALUE(MNT_NODIRATIME) LX_VALUE(MNT_RELATIME) - -/* linux/radix-tree.h */ -LX_VALUE(RADIX_TREE_INDIRECT_PTR) -LX_GDBPARSED(RADIX_TREE_HEIGHT_MASK) -LX_GDBPARSED(RADIX_TREE_MAP_SHIFT) -LX_GDBPARSED(RADIX_TREE_MAP_MASK) diff --git a/scripts/gdb/linux/radixtree.py b/scripts/gdb/linux/radixtree.py deleted file mode 100644 index 0fdef4e..0000000 --- a/scripts/gdb/linux/radixtree.py +++ /dev/null @@ -1,97 +0,0 @@ -# -# gdb helper commands and functions for Linux kernel debugging -# -# Radix Tree Parser -# -# Copyright (c) 2016 Linaro Ltd -# -# Authors: -# Kieran Bingham -# -# This work is licensed under the terms of the GNU GPL version 2. -# - -import gdb - -from linux import utils -from linux import constants - -radix_tree_root_type = utils.CachedType("struct radix_tree_root") -radix_tree_node_type = utils.CachedType("struct radix_tree_node") - - -def is_indirect_ptr(node): - long_type = utils.get_long_type() - return (node.cast(long_type) & constants.LX_RADIX_TREE_INDIRECT_PTR) - - -def indirect_to_ptr(node): - long_type = utils.get_long_type() - node_type = node.type - indirect_ptr = node.cast(long_type) & ~constants.LX_RADIX_TREE_INDIRECT_PTR - return indirect_ptr.cast(node_type) - - -def maxindex(height): - height = height & constants.LX_RADIX_TREE_HEIGHT_MASK - return gdb.parse_and_eval("height_to_maxindex["+str(height)+"]") - - -def lookup(root, index): - if root.type == radix_tree_root_type.get_type().pointer(): - root = root.dereference() - elif root.type != radix_tree_root_type.get_type(): - raise gdb.GdbError("Must be struct radix_tree_root not {}" - .format(root.type)) - - node = root['rnode'] - if node is 0: - return None - - if not (is_indirect_ptr(node)): - if (index > 0): - return None - return node - - node = indirect_to_ptr(node) - - height = node['path'] & constants.LX_RADIX_TREE_HEIGHT_MASK - if (index > maxindex(height)): - return None - - shift = (height-1) * constants.LX_RADIX_TREE_MAP_SHIFT - - while True: - new_index = (index >> shift) & constants.LX_RADIX_TREE_MAP_MASK - slot = node['slots'][new_index] - - node = slot.cast(node.type.pointer()).dereference() - if node is 0: - return None - - shift -= constants.LX_RADIX_TREE_MAP_SHIFT - height -= 1 - - if (height <= 0): - break - - return node - - -class LxRadixTree(gdb.Function): - """ Lookup and return a node from a RadixTree. - -$lx_radix_tree_lookup(root_node [, index]): Return the node at the given index. -If index is omitted, the root node is dereferenced and returned.""" - - def __init__(self): - super(LxRadixTree, self).__init__("lx_radix_tree_lookup") - - def invoke(self, root, index=0): - result = lookup(root, index) - if result is None: - raise gdb.GdbError("No entry in tree at index {}".format(index)) - - return result - -LxRadixTree() diff --git a/scripts/gdb/vmlinux-gdb.py b/scripts/gdb/vmlinux-gdb.py index 3a80ad6..6e0b0af 100644 --- a/scripts/gdb/vmlinux-gdb.py +++ b/scripts/gdb/vmlinux-gdb.py @@ -31,4 +31,3 @@ else: import linux.lists import linux.proc import linux.constants - import linux.radixtree -- cgit v0.10.2 From ef722fd4a7592ddbfa42bcb3ad8a5caa598589b3 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Thu, 14 Jul 2016 12:07:09 -0700 Subject: Revert "scripts/gdb: add documentation example for radix tree" This reverts commit 9b5580359a84 ("scripts/gdb: add documentation example for radix tree") The python implementation of radix tree was merged at the same time as a refactoring of the radix tree implementation and doesn't work. The feature is being reverted, thus we revert the documentation as well. Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/gdb-kernel-debugging.txt index 4ab7d43..7050ce8 100644 --- a/Documentation/gdb-kernel-debugging.txt +++ b/Documentation/gdb-kernel-debugging.txt @@ -139,27 +139,6 @@ Examples of using the Linux-provided gdb helpers start_comm = "swapper/2\000\000\000\000\000\000" } - o Dig into a radix tree data structure, such as the IRQ descriptors: - (gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18) - $6 = { - irq_common_data = { - state_use_accessors = 67584, - handler_data = 0x0 <__vectors_start>, - msi_desc = 0x0 <__vectors_start>, - affinity = {{ - bits = {65535} - }} - }, - irq_data = { - mask = 0, - irq = 18, - hwirq = 27, - common = 0xee803d80, - chip = 0xc0eb0854 , - domain = 0xee808000, - parent_data = 0x0 <__vectors_start>, - chip_data = 0xc0eb0854 - } <... trimmed ...> List of commands and functions ------------------------------ -- cgit v0.10.2 From 9818b8cde6221fe7a52aad816425f67d4439b14e Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 14 Jul 2016 12:07:12 -0700 Subject: madvise_free, thp: fix madvise_free_huge_pmd return value after splitting madvise_free_huge_pmd should return 0 if the fallback PTE operations are required. In madvise_free_huge_pmd, if part pages of THP are discarded, the THP will be split and fallback PTE operations should be used if splitting succeeds. But the original code will make fallback PTE operations skipped, after splitting succeeds. Fix that via make madvise_free_huge_pmd return 0 after splitting successfully, so that the fallback PTE operations will be done. Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.com Signed-off-by: "Huang, Ying" Acked-by: Minchan Kim Cc: "Kirill A. Shutemov" Cc: Vlastimil Babka Cc: Jerome Marchand Cc: Andrea Arcangeli Cc: Ebru Akagunduz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 9ed5853..55940d1 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1624,14 +1624,9 @@ int madvise_free_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma, if (next - addr != HPAGE_PMD_SIZE) { get_page(page); spin_unlock(ptl); - if (split_huge_page(page)) { - put_page(page); - unlock_page(page); - goto out_unlocked; - } + split_huge_page(page); put_page(page); unlock_page(page); - ret = 1; goto out_unlocked; } -- cgit v0.10.2 From 12cb22bb8ae9aff9d72a9c0a234f26d641b20eb6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 14 Jul 2016 12:07:15 -0700 Subject: uapi: export lirc.h header This header contains the userspace API for lirc. This is a fixup for commit b7be755733dc ("[media] bz#75751: Move internal header file lirc.h to uapi/"). It moved the header to the right place, but it forgot to add it at Kbuild. So, despite being at uapi, it is not copied to the right place. Fixes: b7be755733dc44c72 ("[media] bz#75751: Move internal header file lirc.h to uapi/") Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.com Signed-off-by: Mauro Carvalho Chehab Cc: Alec Leamas Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 8bdae34..ec10cfe 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -245,6 +245,7 @@ endif header-y += hw_breakpoint.h header-y += l2tp.h header-y += libc-compat.h +header-y += lirc.h header-y += limits.h header-y += llc.h header-y += loop.h -- cgit v0.10.2 From 0ab686d8c8303069e80300663b3be6201a8697fb Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Thu, 14 Jul 2016 12:07:17 -0700 Subject: kasan/quarantine: fix bugs on qlist_move_cache() There are two bugs on qlist_move_cache(). One is that qlist's tail isn't set properly. curr->next can be NULL since it is singly linked list and NULL value on tail is invalid if there is one item on qlist. Another one is that if cache is matched, qlist_put() is called and it will set curr->next to NULL. It would cause to stop the loop prematurely. These problems come from complicated implementation so I'd like to re-implement it completely. Implementation in this patch is really simple. Iterate all qlist_nodes and put them to appropriate list. Unfortunately, I got this bug sometime ago and lose oops message. But, the bug looks trivial and no need to attach oops. Fixes: 55834c59098d ("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim Reviewed-by: Dmitry Vyukov Acked-by: Andrey Ryabinin Acked-by: Alexander Potapenko Cc: Kuthonuzo Luruo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/kasan/quarantine.c b/mm/kasan/quarantine.c index 4973505..65793f1 100644 --- a/mm/kasan/quarantine.c +++ b/mm/kasan/quarantine.c @@ -238,30 +238,23 @@ static void qlist_move_cache(struct qlist_head *from, struct qlist_head *to, struct kmem_cache *cache) { - struct qlist_node *prev = NULL, *curr; + struct qlist_node *curr; if (unlikely(qlist_empty(from))) return; curr = from->head; + qlist_init(from); while (curr) { - struct qlist_node *qlink = curr; - struct kmem_cache *obj_cache = qlink_to_cache(qlink); - - if (obj_cache == cache) { - if (unlikely(from->head == qlink)) { - from->head = curr->next; - prev = curr; - } else - prev->next = curr->next; - if (unlikely(from->tail == qlink)) - from->tail = curr->next; - from->bytes -= cache->size; - qlist_put(to, qlink, cache->size); - } else { - prev = curr; - } - curr = curr->next; + struct qlist_node *next = curr->next; + struct kmem_cache *obj_cache = qlink_to_cache(curr); + + if (obj_cache == cache) + qlist_put(to, curr, obj_cache->size); + else + qlist_put(from, curr, obj_cache->size); + + curr = next; } } -- cgit v0.10.2 From e4568d3803852d00effd41dcdd489e726b998879 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 14 Jul 2016 12:07:20 -0700 Subject: mm, meminit: always return a valid node from early_pfn_to_nid early_pfn_to_nid can return node 0 if a PFN is invalid on machines that has no node 0. A machine with only node 1 was observed to crash with the following message: BUG: unable to handle kernel paging request at 000000000002a3c8 PGD 0 Modules linked in: Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006 task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 RIP: reserve_bootmem_region+0x6a/0xef CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0 Call Trace: free_all_bootmem+0x4b/0x12a mem_init+0x70/0xa3 start_kernel+0x25b/0x49b The problem is that early_page_uninitialised uses the early_pfn_to_nid helper which returns node 0 for invalid PFNs. No caller of early_pfn_to_nid cares except early_page_uninitialised. This patch has early_pfn_to_nid always return a valid node. Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman Acked-by: David Rientjes Cc: [4.2+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 6903b69..5d01352 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1273,7 +1273,7 @@ int __meminit early_pfn_to_nid(unsigned long pfn) spin_lock(&early_pfn_lock); nid = __early_pfn_to_nid(pfn, &early_pfnnid_cache); if (nid < 0) - nid = 0; + nid = first_online_node; spin_unlock(&early_pfn_lock); return nid; -- cgit v0.10.2 From ef70b6f41cda6270165a6f27b2548ed31cfa3cb2 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 14 Jul 2016 12:07:23 -0700 Subject: mm, meminit: ensure node is online before checking whether pages are uninitialised early_page_uninitialised looks up an arbitrary PFN. While a machine without node 0 will boot with "mm, page_alloc: Always return a valid node from early_pfn_to_nid", it works because it assumes that nodes are always in PFN order. This is not guaranteed so this patch adds robustness by always checking if the node being checked is online. Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman Acked-by: David Rientjes Cc: [4.2+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5d01352..8b3e134 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -286,7 +286,9 @@ static inline void reset_deferred_meminit(pg_data_t *pgdat) /* Returns true if the struct page for the pfn is uninitialised */ static inline bool __meminit early_page_uninitialised(unsigned long pfn) { - if (pfn >= NODE_DATA(early_pfn_to_nid(pfn))->first_deferred_pfn) + int nid = early_pfn_to_nid(pfn); + + if (node_online(nid) && pfn >= NODE_DATA(nid)->first_deferred_pfn) return true; return false; -- cgit v0.10.2 From d02038f972538b93011d78c068f44514fbde0a8c Mon Sep 17 00:00:00 2001 From: Florian Meier Date: Thu, 14 Jul 2016 12:07:26 -0700 Subject: gcov: add support for gcc version >= 6 Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp Signed-off-by: Florian Meier Reviewed-by: Peter Oberparleiter Tested-by: Peter Oberparleiter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c index e25e92f..6a5c239 100644 --- a/kernel/gcov/gcc_4_7.c +++ b/kernel/gcov/gcc_4_7.c @@ -18,7 +18,7 @@ #include #include "gcov.h" -#if __GNUC__ == 5 && __GNUC_MINOR__ >= 1 +#if (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1) #define GCOV_COUNTERS 10 #elif __GNUC__ == 4 && __GNUC_MINOR__ >= 9 #define GCOV_COUNTERS 9 -- cgit v0.10.2 From e41f501d391265ff568f3e49d6128cc30856a36f Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Thu, 14 Jul 2016 12:07:29 -0700 Subject: vmlinux.lds: account for destructor sections If CONFIG_KASAN is enabled and gcc is configured with --disable-initfini-array and/or gold linker is used, gcc emits .ctors/.dtors and .text.startup/.text.exit sections instead of .init_array/.fini_array. .dtors section is not explicitly accounted in the linker script and messes vvar/percpu layout. We want: ffffffff822bfd80 D _edata ffffffff822c0000 D __vvar_beginning_hack ffffffff822c0000 A __vvar_page ffffffff822c0080 0000000000000098 D vsyscall_gtod_data ffffffff822c1000 A __init_begin ffffffff822c1000 D init_per_cpu__irq_stack_union ffffffff822c1000 A __per_cpu_load ffffffff822d3000 D init_per_cpu__gdt_page We got: ffffffff8279a600 D _edata ffffffff8279b000 A __vvar_page ffffffff8279c000 A __init_begin ffffffff8279c000 D init_per_cpu__irq_stack_union ffffffff8279c000 A __per_cpu_load ffffffff8279e000 D __vvar_beginning_hack ffffffff8279e080 0000000000000098 D vsyscall_gtod_data ffffffff827ae000 D init_per_cpu__gdt_page This happens because __vvar_page and .vvar get different addresses in arch/x86/kernel/vmlinux.lds.S: . = ALIGN(PAGE_SIZE); __vvar_page = .; .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { /* work around gold bug 13023 */ __vvar_beginning_hack = .; Discard .dtors/.fini_array/.text.exit, since we don't call dtors. Merge .text.startup into init text. Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov Reviewed-by: Andrey Ryabinin Cc: [4.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6a67ab9..081d0f2 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -542,15 +542,19 @@ #define INIT_TEXT \ *(.init.text) \ + *(.text.startup) \ MEM_DISCARD(init.text) #define EXIT_DATA \ *(.exit.data) \ + *(.fini_array) \ + *(.dtors) \ MEM_DISCARD(exit.data) \ MEM_DISCARD(exit.rodata) #define EXIT_TEXT \ *(.exit.text) \ + *(.text.exit) \ MEM_DISCARD(exit.text) #define EXIT_CALL \ -- cgit v0.10.2 From 33f4751e99601b7bfd1d66aedabd3ee9140922de Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 14 Jul 2016 12:07:32 -0700 Subject: mm: thp: move pmd check inside ptl for freeze_page() I found a race condition triggering VM_BUG_ON() in freeze_page(), when running a testcase with 3 processes: - process 1: keep writing thp, - process 2: keep clearing soft-dirty bits from virtual address of process 1 - process 3: call migratepages for process 1, The kernel message is like this: kernel BUG at /src/linux-dev/mm/huge_memory.c:3096! invalid opcode: 0000 [#1] SMP Modules linked in: cfg80211 rfkill crc32c_intel ppdev serio_raw pcspkr virtio_balloon virtio_console parport_pc parport pvpanic acpi_cpufreq tpm_tis tpm i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy virtio_pci virtio_ring virtio CPU: 0 PID: 28863 Comm: migratepages Not tainted 4.6.0-v4.6-160602-0827-+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880037320000 ti: ffff88007cdd0000 task.ti: ffff88007cdd0000 RIP: 0010:[] [] split_huge_page_to_list+0x496/0x590 RSP: 0018:ffff88007cdd3b70 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88007c7b88c0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000700000200 RDI: ffffea0003188000 RBP: ffff88007cdd3bb8 R08: 0000000000000001 R09: 00003ffffffff000 R10: ffff880000000000 R11: ffffc000001fffff R12: ffffea0003188000 R13: ffffea0003188000 R14: 0000000000000000 R15: 0400000000000080 FS: 00007f8ec241d740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8ec1f3ed20 CR3: 000000003707b000 CR4: 00000000000006f0 Call Trace: ? list_del+0xd/0x30 queue_pages_pte_range+0x4d1/0x590 __walk_page_range+0x204/0x4e0 walk_page_range+0x71/0xf0 queue_pages_range+0x75/0x90 ? queue_pages_hugetlb+0x190/0x190 ? new_node_page+0xc0/0xc0 ? change_prot_numa+0x40/0x40 migrate_to_node+0x71/0xd0 do_migrate_pages+0x1c3/0x210 SyS_migrate_pages+0x261/0x290 entry_SYSCALL_64_fastpath+0x1a/0xa4 Code: e8 b0 87 fb ff 0f 0b 48 c7 c6 30 32 9f 81 e8 a2 87 fb ff 0f 0b 48 c7 c6 b8 46 9f 81 e8 94 87 fb ff 0f 0b 85 c0 0f 84 3e fd ff ff <0f> 0b 85 c0 0f 85 a6 00 00 00 48 8b 75 c0 4c 89 f7 41 be f0 ff RIP split_huge_page_to_list+0x496/0x590 I'm not sure of the full scenario of the reproduction, but my debug showed that split_huge_pmd_address(freeze=true) returned without running main code of pmd splitting because pmd_present(*pmd) in precheck somehow returned 0. If this happens, the subsequent try_to_unmap() fails and returns non-zero (because page_mapcount() still > 0), and finally VM_BUG_ON() fires. This patch tries to fix it by prechecking pmd state inside ptl. Link: http://lkml.kernel.org/r/1466990929-7452-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi Signed-off-by: Kirill A. Shutemov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index 419fb9e..f0a7a03 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -94,7 +94,7 @@ static inline int split_huge_page(struct page *page) void deferred_split_huge_page(struct page *page); void __split_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, - unsigned long address, bool freeze); + unsigned long address, bool freeze, struct page *page); #define split_huge_pmd(__vma, __pmd, __address) \ do { \ @@ -102,7 +102,7 @@ void __split_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, if (pmd_trans_huge(*____pmd) \ || pmd_devmap(*____pmd)) \ __split_huge_pmd(__vma, __pmd, __address, \ - false); \ + false, NULL); \ } while (0) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 55940d1..343a2b7 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2984,7 +2984,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, } void __split_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, - unsigned long address, bool freeze) + unsigned long address, bool freeze, struct page *page) { spinlock_t *ptl; struct mm_struct *mm = vma->vm_mm; @@ -2992,8 +2992,17 @@ void __split_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, mmu_notifier_invalidate_range_start(mm, haddr, haddr + HPAGE_PMD_SIZE); ptl = pmd_lock(mm, pmd); + + /* + * If caller asks to setup a migration entries, we need a page to check + * pmd against. Otherwise we can end up replacing wrong page. + */ + VM_BUG_ON(freeze && !page); + if (page && page != pmd_page(*pmd)) + goto out; + if (pmd_trans_huge(*pmd)) { - struct page *page = pmd_page(*pmd); + page = pmd_page(*pmd); if (PageMlocked(page)) clear_page_mlock(page); } else if (!pmd_devmap(*pmd)) @@ -3020,24 +3029,8 @@ void split_huge_pmd_address(struct vm_area_struct *vma, unsigned long address, return; pmd = pmd_offset(pud, address); - if (!pmd_present(*pmd) || (!pmd_trans_huge(*pmd) && !pmd_devmap(*pmd))) - return; - /* - * If caller asks to setup a migration entries, we need a page to check - * pmd against. Otherwise we can end up replacing wrong page. - */ - VM_BUG_ON(freeze && !page); - if (page && page != pmd_page(*pmd)) - return; - - /* - * Caller holds the mmap_sem write mode or the anon_vma lock, - * so a huge pmd cannot materialize from under us (khugepaged - * holds both the mmap_sem write mode and the anon_vma lock - * write mode). - */ - __split_huge_pmd(vma, pmd, address, freeze); + __split_huge_pmd(vma, pmd, address, freeze, page); } void vma_adjust_trans_huge(struct vm_area_struct *vma, -- cgit v0.10.2 From 55bda43bb26d2c11eeedac742eff87a8ac34c106 Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 14 Jul 2016 12:07:35 -0700 Subject: mm: rmap: call page_check_address() with sync enabled to avoid racy check The previous patch addresses the race between split_huge_pmd_address() and someone changing the pmd. The fix is only for splitting of normal thp (i.e. pmd-mapped thp,) and for splitting of pte-mapped thp there still is the similar race. For splitting pte-mapped thp, the pte's conversion is done by try_to_unmap_one(TTU_MIGRATION). This function checks page_check_address() to get the target pte, but it can return NULL under some race, leading to VM_BUG_ON() in freeze_page(). Fortunately, page_check_address() already has an argument to decide whether we do a quick/racy check or not, so let's flip it when called from freeze_page(). Link: http://lkml.kernel.org/r/1466990929-7452-2-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi Cc: Kirill A. Shutemov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index 0ea5d90..e4b713a 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1427,7 +1427,8 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma, goto out; } - pte = page_check_address(page, mm, address, &ptl, 0); + pte = page_check_address(page, mm, address, &ptl, + PageTransCompound(page)); if (!pte) goto out; -- cgit v0.10.2 From 5a49973d7143ebbabd76e1dcd69ee42e349bb7b9 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 14 Jul 2016 12:07:38 -0700 Subject: mm: thp: refix false positive BUG in page_move_anon_rmap() The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's worth: the syzkaller fuzzer hit it again. It's still wrong for some THP cases, because linear_page_index() was never intended to apply to addresses before the start of a vma. That's easily fixed with a signed long cast inside linear_page_index(); and Dmitry has tested such a patch, to verify the false positive. But why extend linear_page_index() just for this case? when the avoidance in page_move_anon_rmap() has already grown ugly, and there's no reason for the check at all (nothing else there is using address or index). Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE, remove CONFIG_DEBUG_VM PageTransHuge adjustment. And one more thing: should the compound_head(page) be done inside or outside page_move_anon_rmap()? It's usually pushed down to the lowest level nowadays (and mm/memory.c shows no other explicit use of it), so I think it's better done in page_move_anon_rmap() than by caller. Fixes: 0798d3c022dc ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvils Signed-off-by: Hugh Dickins Reported-by: Dmitry Vyukov Acked-by: Kirill A. Shutemov Cc: Mika Westerberg Cc: Andrea Arcangeli Cc: Rik van Riel Cc: [4.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 49eb4f8..2b0fad8 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -158,7 +158,7 @@ struct anon_vma *page_get_anon_vma(struct page *page); /* * rmap interfaces called when adding or removing pte of page */ -void page_move_anon_rmap(struct page *, struct vm_area_struct *, unsigned long); +void page_move_anon_rmap(struct page *, struct vm_area_struct *); void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long, bool); void do_page_add_anon_rmap(struct page *, struct vm_area_struct *, diff --git a/mm/hugetlb.c b/mm/hugetlb.c index c1f3c0b..addfe4ac 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3383,7 +3383,7 @@ retry_avoidcopy: /* If no-one else is actually using this page, avoid the copy * and just make the page writable */ if (page_mapcount(old_page) == 1 && PageAnon(old_page)) { - page_move_anon_rmap(old_page, vma, address); + page_move_anon_rmap(old_page, vma); set_huge_ptep_writable(vma, address, ptep); return 0; } diff --git a/mm/memory.c b/mm/memory.c index cd1f29e..9e04681 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2399,8 +2399,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, * Protected against the rmap code by * the page lock. */ - page_move_anon_rmap(compound_head(old_page), - vma, address); + page_move_anon_rmap(old_page, vma); } unlock_page(old_page); return wp_page_reuse(mm, vma, address, page_table, ptl, diff --git a/mm/rmap.c b/mm/rmap.c index e4b713a..701b93f 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1084,23 +1084,20 @@ EXPORT_SYMBOL_GPL(page_mkclean); * page_move_anon_rmap - move a page to our anon_vma * @page: the page to move to our anon_vma * @vma: the vma the page belongs to - * @address: the user virtual address mapped * * When a page belongs exclusively to one process after a COW event, * that page can be moved into the anon_vma that belongs to just that * process, so the rmap code will not search the parent or sibling * processes. */ -void page_move_anon_rmap(struct page *page, - struct vm_area_struct *vma, unsigned long address) +void page_move_anon_rmap(struct page *page, struct vm_area_struct *vma) { struct anon_vma *anon_vma = vma->anon_vma; + page = compound_head(page); + VM_BUG_ON_PAGE(!PageLocked(page), page); VM_BUG_ON_VMA(!anon_vma, vma); - if (IS_ENABLED(CONFIG_DEBUG_VM) && PageTransHuge(page)) - address &= HPAGE_PMD_MASK; - VM_BUG_ON_PAGE(page->index != linear_page_index(vma, address), page); anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON; /* -- cgit v0.10.2 From d3d36c4b5c5fbdd68542be73ffd53eb210fbf7cf Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 14 Jul 2016 12:07:41 -0700 Subject: mm: workingset: printk missing log level, use pr_info() Commit 612e44939c3c ("mm: workingset: eviction buckets for bigmem/lowbit machines") added a printk without a log level. Quieten it by using pr_info(). Link: http://lkml.kernel.org/r/1466982072-29836-2-git-send-email-anton@ozlabs.org Signed-off-by: Anton Blanchard Acked-by: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/workingset.c b/mm/workingset.c index 8a75f8d..5772775 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -491,7 +491,7 @@ static int __init workingset_init(void) max_order = fls_long(totalram_pages - 1); if (max_order > timestamp_bits) bucket_order = max_order - timestamp_bits; - printk("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n", + pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n", timestamp_bits, max_order, bucket_order); ret = list_lru_init_key(&workingset_shadow_nodes, &shadow_nodes_key); -- cgit v0.10.2 From 9babed6a66b5577628d9e76e5a6cb6104d7ddd4c Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 14 Jul 2016 12:07:43 -0700 Subject: m32r: fix build warning about putc We were getting build warning: arch/m32r/boot/compressed/m32r_sio.c:11:13: warning: conflicting types for built-in function 'putc' Here putc is used as a static function so lets just rename it to avoid the conflict with the builtin putc. Link: http://lkml.kernel.org/r/1466977046-24724-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m32r/boot/compressed/m32r_sio.c b/arch/m32r/boot/compressed/m32r_sio.c index 01d877c..cf3023d 100644 --- a/arch/m32r/boot/compressed/m32r_sio.c +++ b/arch/m32r/boot/compressed/m32r_sio.c @@ -8,12 +8,13 @@ #include -static void putc(char c); +static void m32r_putc(char c); static int puts(const char *s) { char c; - while ((c = *s++)) putc(c); + while ((c = *s++)) + m32r_putc(c); return 0; } @@ -41,7 +42,7 @@ static int puts(const char *s) #define BOOT_SIO0TXB PLD_ESIO0TXB #endif -static void putc(char c) +static void m32r_putc(char c) { while ((*BOOT_SIO0STS & 0x3) != 0x3) cpu_relax(); @@ -61,7 +62,7 @@ static void putc(char c) #define SIO0TXB (volatile unsigned short *)(0x00efd000 + 30) #endif -static void putc(char c) +static void m32r_putc(char c) { while ((*SIO0STS & 0x1) == 0) cpu_relax(); -- cgit v0.10.2 From 858296c8784bf98450765cbc6b1bc2e44175cc01 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 14 Jun 2016 15:45:42 -0700 Subject: i40e/i40evf: Fix i40e_rx_checksum There are a couple of issues I found in i40e_rx_checksum while doing some recent testing. As a result I have found the Rx checksum logic is pretty much broken and returning that the checksum is valid for tunnels in cases where it is not. First the inner types are not the correct values to use to test for if a tunnel is present or not. In addition the inner protocol types are not a bitmask as such performing an OR of the values doesn't make sense. I have instead changed the code so that the inner protocol types are used to determine if we report CHECKSUM_UNNECESSARY or not. For anything that does not end in UDP, TCP, or SCTP it doesn't make much sense to report a checksum offload since it won't contain a checksum anyway. This leaves us with the need to set the csum_level based on some value. For that purpose I am using the tunnel_type field. If the tunnel type is GRENAT or greater then this means we have a GRE or UDP tunnel with an inner header. In the case of GRE or UDP we will have a possible checksum present so for this reason it should be safe to set the csum_level to 1 to indicate that we are reporting the state of the inner header. Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 55f151f..a8868e1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1280,8 +1280,8 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi, union i40e_rx_desc *rx_desc) { struct i40e_rx_ptype_decoded decoded; - bool ipv4, ipv6, tunnel = false; u32 rx_error, rx_status; + bool ipv4, ipv6; u8 ptype; u64 qword; @@ -1336,19 +1336,23 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi, if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT)) return; - /* The hardware supported by this driver does not validate outer - * checksums for tunneled VXLAN or GENEVE frames. I don't agree - * with it but the specification states that you "MAY validate", it - * doesn't make it a hard requirement so if we have validated the - * inner checksum report CHECKSUM_UNNECESSARY. + /* If there is an outer header present that might contain a checksum + * we need to bump the checksum level by 1 to reflect the fact that + * we are indicating we validated the inner checksum. */ - if (decoded.inner_prot & (I40E_RX_PTYPE_INNER_PROT_TCP | - I40E_RX_PTYPE_INNER_PROT_UDP | - I40E_RX_PTYPE_INNER_PROT_SCTP)) - tunnel = true; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - skb->csum_level = tunnel ? 1 : 0; + if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT) + skb->csum_level = 1; + + /* Only report checksum unnecessary for TCP, UDP, or SCTP */ + switch (decoded.inner_prot) { + case I40E_RX_PTYPE_INNER_PROT_TCP: + case I40E_RX_PTYPE_INNER_PROT_UDP: + case I40E_RX_PTYPE_INNER_PROT_SCTP: + skb->ip_summed = CHECKSUM_UNNECESSARY; + /* fall though */ + default: + break; + } return; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index be99189..79d99cd 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -752,8 +752,8 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi, union i40e_rx_desc *rx_desc) { struct i40e_rx_ptype_decoded decoded; - bool ipv4, ipv6, tunnel = false; u32 rx_error, rx_status; + bool ipv4, ipv6; u8 ptype; u64 qword; @@ -808,19 +808,23 @@ static inline void i40e_rx_checksum(struct i40e_vsi *vsi, if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT)) return; - /* The hardware supported by this driver does not validate outer - * checksums for tunneled VXLAN or GENEVE frames. I don't agree - * with it but the specification states that you "MAY validate", it - * doesn't make it a hard requirement so if we have validated the - * inner checksum report CHECKSUM_UNNECESSARY. + /* If there is an outer header present that might contain a checksum + * we need to bump the checksum level by 1 to reflect the fact that + * we are indicating we validated the inner checksum. */ - if (decoded.inner_prot & (I40E_RX_PTYPE_INNER_PROT_TCP | - I40E_RX_PTYPE_INNER_PROT_UDP | - I40E_RX_PTYPE_INNER_PROT_SCTP)) - tunnel = true; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - skb->csum_level = tunnel ? 1 : 0; + if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT) + skb->csum_level = 1; + + /* Only report checksum unnecessary for TCP, UDP, or SCTP */ + switch (decoded.inner_prot) { + case I40E_RX_PTYPE_INNER_PROT_TCP: + case I40E_RX_PTYPE_INNER_PROT_UDP: + case I40E_RX_PTYPE_INNER_PROT_SCTP: + skb->ip_summed = CHECKSUM_UNNECESSARY; + /* fall though */ + default: + break; + } return; -- cgit v0.10.2 From f6bd09625ba66446821d55c61891bea9e2cdc5b3 Mon Sep 17 00:00:00 2001 From: Kiran Patil Date: Mon, 20 Jun 2016 09:10:34 -0700 Subject: i40e: enable VSI broadcast promiscuous mode instead of adding broadcast filter This patch sets VSI broadcast promiscuous mode during VSI add sequence and prevents adding MAC filter if specified MAC address is broadcast. Change-ID: Ia62251fca095bc449d0497fc44bec3a5a0136773 Signed-off-by: Kiran Patil Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5ea2200..1592dcb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1344,6 +1344,13 @@ struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi, if (!vsi || !macaddr) return NULL; + /* Do not allow broadcast filter to be added since broadcast filter + * is added as part of add VSI for any newly created VSI except + * FDIR VSI + */ + if (is_broadcast_ether_addr(macaddr)) + return NULL; + f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev); if (!f) { f = kzalloc(sizeof(*f), GFP_ATOMIC); @@ -2151,18 +2158,6 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) aq_ret, pf->hw.aq.asq_last_status); } } - aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw, - vsi->seid, - cur_promisc, NULL); - if (aq_ret) { - retval = i40e_aq_rc_to_posix(aq_ret, - pf->hw.aq.asq_last_status); - dev_info(&pf->pdev->dev, - "set brdcast promisc failed, err %s, aq_err %s\n", - i40e_stat_str(&pf->hw, aq_ret), - i40e_aq_str(&pf->hw, - pf->hw.aq.asq_last_status)); - } } out: /* if something went wrong then set the changed flag so we try again */ @@ -9224,6 +9219,7 @@ int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi) static int i40e_add_vsi(struct i40e_vsi *vsi) { int ret = -ENODEV; + i40e_status aq_ret = 0; u8 laa_macaddr[ETH_ALEN]; bool found_laa_mac_filter = false; struct i40e_pf *pf = vsi->back; @@ -9413,6 +9409,18 @@ static int i40e_add_vsi(struct i40e_vsi *vsi) vsi->seid = ctxt.seid; vsi->id = ctxt.vsi_number; } + /* Except FDIR VSI, for all othet VSI set the broadcast filter */ + if (vsi->type != I40E_VSI_FDIR) { + aq_ret = i40e_aq_set_vsi_broadcast(hw, vsi->seid, true, NULL); + if (aq_ret) { + ret = i40e_aq_rc_to_posix(aq_ret, + hw->aq.asq_last_status); + dev_info(&pf->pdev->dev, + "set brdcast promisc failed, err %s, aq_err %s\n", + i40e_stat_str(hw, aq_ret), + i40e_aq_str(hw, hw->aq.asq_last_status)); + } + } spin_lock_bh(&vsi->mac_filter_list_lock); /* If macvlan filters already exist, force them to get loaded */ -- cgit v0.10.2 From 4b732cd4bb6006ad7fd4d5cdba27fcb751cdf4b7 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 15 Jun 2016 15:37:59 +0200 Subject: ixgbe: napi_poll must return the work done Currently the function ixgbe_poll() returns 0 when it clean completely the rx rings, but this foul budget accounting in core code. Fix this returning the actual work done, capped to weight - 1, since the core doesn't allow to return the full budget when the driver modifies the napi status Signed-off-by: Paolo Abeni Reviewed-by: Venkatesh Srinivas Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 088c47c..8bebd86 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2887,7 +2887,7 @@ int ixgbe_poll(struct napi_struct *napi, int budget) if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, BIT_ULL(q_vector->v_idx)); - return 0; + return min(work_done, budget - 1); } /** -- cgit v0.10.2 From 7f6c553902bfa1c4e3f6cfa955c5ea036c7fe8e4 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Mon, 27 Jun 2016 12:16:43 -0300 Subject: i40e: use valid online CPU on q_vector initialization Currently, the q_vector initialization routine sets the affinity_mask of a q_vector based on v_idx value. Meaning a loop iterates on v_idx, which is an incremental value, and the cpumask is created based on this value. This is a problem in systems with multiple logical CPUs per core (like in SMT scenarios). If we disable some logical CPUs, by turning SMT off for example, we will end up with a sparse cpu_online_mask, i.e., only the first CPU in a core is online, and incremental filling in q_vector cpumask might lead to multiple offline CPUs being assigned to q_vectors. Example: if we have a system with 8 cores each one containing 8 logical CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is disabled, only the 1st CPU in each core remains online, so the cpu_online_mask in this case would have only 8 bits set, in a sparse way. In general case, when SMT is off the cpu_online_mask has only C bits set: 0, 1*N, 2*N, ..., C*(N-1) where C == # of cores; N == # of logical CPUs per core. In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set. This patch changes the way q_vector's affinity_mask is created: it iterates on v_idx, but consumes the CPU index from the cpu_online_mask instead of just using the v_idx incremental value. No functional changes were introduced. Signed-off-by: Guilherme G Piccoli Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 1592dcb..501f15d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7721,10 +7721,11 @@ static int i40e_init_msix(struct i40e_pf *pf) * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector * @vsi: the VSI being configured * @v_idx: index of the vector in the vsi struct + * @cpu: cpu to be used on affinity_mask * * We allocate one q_vector. If allocation fails we return -ENOMEM. **/ -static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx) +static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx, int cpu) { struct i40e_q_vector *q_vector; @@ -7735,7 +7736,8 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx) q_vector->vsi = vsi; q_vector->v_idx = v_idx; - cpumask_set_cpu(v_idx, &q_vector->affinity_mask); + cpumask_set_cpu(cpu, &q_vector->affinity_mask); + if (vsi->netdev) netif_napi_add(vsi->netdev, &q_vector->napi, i40e_napi_poll, NAPI_POLL_WEIGHT); @@ -7759,8 +7761,7 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx) static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; - int v_idx, num_q_vectors; - int err; + int err, v_idx, num_q_vectors, current_cpu; /* if not MSIX, give the one vector only to the LAN VSI */ if (pf->flags & I40E_FLAG_MSIX_ENABLED) @@ -7770,10 +7771,15 @@ static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi) else return -EINVAL; + current_cpu = cpumask_first(cpu_online_mask); + for (v_idx = 0; v_idx < num_q_vectors; v_idx++) { - err = i40e_vsi_alloc_q_vector(vsi, v_idx); + err = i40e_vsi_alloc_q_vector(vsi, v_idx, current_cpu); if (err) goto err_out; + current_cpu = cpumask_next(current_cpu, cpu_online_mask); + if (unlikely(current_cpu >= nr_cpu_ids)) + current_cpu = cpumask_first(cpu_online_mask); } return 0; -- cgit v0.10.2 From da0a0acaf8881c4fb960064d6cf6e7df2fd0f8b5 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 19 May 2016 09:14:20 +0200 Subject: drm/i915/psr: Implement PSR2 w/a for gen9 Found this while browsing Bspec. Looks like it applies to both skl and kbl. v2: Also for bxt (Art). Cc: Rodrigo Vivi Cc: Sonika Jindal Cc: Durgadoss R Cc: "Pandiyan, Dhinakaran" Cc: "Runyan, Arthur J" Reviewed-by: Sonika Jindal Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1463642060-30728-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit dc00b6a07c2206e7b7dbcbeff856049264c40faa) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b407411..bb43bb1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6031,6 +6031,7 @@ enum skl_disp_power_wells { #define CHICKEN_PAR1_1 _MMIO(0x42080) #define DPA_MASK_VBLANK_SRD (1 << 15) #define FORCE_ARB_IDLE_PLANES (1 << 14) +#define SKL_EDP_PSR_FIX_RDWRAP (1 << 3) #define _CHICKEN_PIPESL_1_A 0x420b0 #define _CHICKEN_PIPESL_1_B 0x420b4 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a7ef45d..3625975 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -58,6 +58,10 @@ static void bxt_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + /* See Bspec note for PSR2_CTL bit 31, Wa#828:bxt */ + I915_WRITE(CHICKEN_PAR1_1, + I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); + /* WaDisableSDEUnitClockGating:bxt */ I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | GEN8_SDEUNIT_CLOCK_GATE_DISABLE); @@ -6698,6 +6702,15 @@ static void lpt_suspend_hw(struct drm_device *dev) } } +static void skylake_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,kbl */ + I915_WRITE(CHICKEN_PAR1_1, + I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); +} + static void broadwell_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -7163,9 +7176,9 @@ static void nop_init_clock_gating(struct drm_device *dev) void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv) { if (IS_SKYLAKE(dev_priv)) - dev_priv->display.init_clock_gating = nop_init_clock_gating; + dev_priv->display.init_clock_gating = skylake_init_clock_gating; else if (IS_KABYLAKE(dev_priv)) - dev_priv->display.init_clock_gating = nop_init_clock_gating; + dev_priv->display.init_clock_gating = skylake_init_clock_gating; else if (IS_BROXTON(dev_priv)) dev_priv->display.init_clock_gating = bxt_init_clock_gating; else if (IS_BROADWELL(dev_priv)) -- cgit v0.10.2 From f98edb2b6f6baffe0d2be66ebe761b51486c6a40 Mon Sep 17 00:00:00 2001 From: "arun.siluvery@linux.intel.com" Date: Mon, 6 Jun 2016 09:52:49 +0100 Subject: drm/i915/gen9: Add WaVFEStateAfterPipeControlwithMediaStateClear Kernel only need to add a register to HW whitelist, required for a preemption related issue. Reference: HSD#2131039 Reviewed-by: Jeff McGee Signed-off-by: Arun Siluvery Signed-off-by: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/1465203169-16591-1-git-send-email-arun.siluvery@linux.intel.com (cherry picked from commit 6bb6285582e0cf9b3a8440e0e714aae5f66d9ce2) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index bb43bb1..7b47504 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6070,6 +6070,7 @@ enum skl_disp_power_wells { #define GEN9_TSG_BARRIER_ACK_DISABLE (1<<8) #define GEN9_CS_DEBUG_MODE1 _MMIO(0x20ec) +#define GEN9_CTX_PREEMPT_REG _MMIO(0x2248) #define GEN8_CS_CHICKEN1 _MMIO(0x2580) /* GEN7 chicken */ diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 04402bb..d812501 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -992,6 +992,11 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG4, (I915_READ(GEN8_L3SQCREG4) | GEN8_LQSC_FLUSH_COHERENT_LINES)); + /* WaVFEStateAfterPipeControlwithMediaStateClear:skl,bxt */ + ret = wa_ring_whitelist_reg(engine, GEN9_CTX_PREEMPT_REG); + if (ret) + return ret; + /* WaEnablePreemptionGranularityControlByUMD:skl,bxt */ ret= wa_ring_whitelist_reg(engine, GEN8_CS_CHICKEN1); if (ret) -- cgit v0.10.2 From c000456c8c642c6474cd7b94344ff1c39e91c575 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:53 +0300 Subject: drm/i915/skl: Add WaDisableGafsUnitClkGating MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to disable clock gating in this unit to work around hardware issue causing possible corruption/hang. v2: name the bit (Ville) v3: leave the fix enabled for 2227050 and set correct bit (Matthew) References: HSD#2227156, HSD#2227050 Cc: Ville Syrjälä Cc: Matthew Auld Reviewed-by: Matthew Auld Signed-off-by: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-2-git-send-email-mika.kuoppala@intel.com (cherry picked from commit eee8efb02a0f9284d85e6b3688f944ca765d7ad3) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 7b47504..80ede80 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6939,6 +6939,7 @@ enum skl_disp_power_wells { #define GEN7_UCGCTL4 _MMIO(0x940c) #define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) +#define GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE (1<<14) #define GEN6_RCGCTL1 _MMIO(0x9410) #define GEN6_RCGCTL2 _MMIO(0x9414) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index d812501..31d7e28 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1125,6 +1125,9 @@ static int skl_init_workarounds(struct intel_engine_cs *engine) GEN7_HALF_SLICE_CHICKEN1, GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); + /* WaDisableGafsUnitClkGating:skl */ + WA_SET_BIT(GEN7_UCGCTL4, GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); + /* WaDisableLSQCROPERFforOCL:skl */ ret = wa_ring_whitelist_reg(engine, GEN8_L3SQCREG4); if (ret) -- cgit v0.10.2 From 68370e0ab1636efce7b7e8254430c1ec321564bc Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:54 +0300 Subject: drm/i915/kbl: Init gen9 workarounds Kabylake is part of gen9 family so init the generic gen9 workarounds for it. v2: rebase Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-3-git-send-email-mika.kuoppala@intel.com (cherry picked from commit e5f81d65ac5a04020d790caf63b2324730ba0277) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 31d7e28..bcd9e70 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -916,21 +916,21 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) uint32_t tmp; int ret; - /* WaEnableLbsSlaRetryTimerDecrement:skl */ + /* WaEnableLbsSlaRetryTimerDecrement:skl,bxt,kbl */ I915_WRITE(BDW_SCRATCH1, I915_READ(BDW_SCRATCH1) | GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE); - /* WaDisableKillLogic:bxt,skl */ + /* WaDisableKillLogic:bxt,skl,kbl */ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | ECOCHK_DIS_TLB); - /* WaClearFlowControlGpgpuContextSave:skl,bxt */ - /* WaDisablePartialInstShootdown:skl,bxt */ + /* WaClearFlowControlGpgpuContextSave:skl,bxt,kbl */ + /* WaDisablePartialInstShootdown:skl,bxt,kbl */ WA_SET_BIT_MASKED(GEN8_ROW_CHICKEN, FLOW_CONTROL_ENABLE | PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE); - /* Syncing dependencies between camera and graphics:skl,bxt */ + /* Syncing dependencies between camera and graphics:skl,bxt,kbl */ WA_SET_BIT_MASKED(HALF_SLICE_CHICKEN3, GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC); @@ -952,18 +952,18 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) */ } - /* WaEnableYV12BugFixInHalfSliceChicken7:skl,bxt */ - /* WaEnableSamplerGPGPUPreemptionSupport:skl,bxt */ + /* WaEnableYV12BugFixInHalfSliceChicken7:skl,bxt,kbl */ + /* WaEnableSamplerGPGPUPreemptionSupport:skl,bxt,kbl */ WA_SET_BIT_MASKED(GEN9_HALF_SLICE_CHICKEN7, GEN9_ENABLE_YV12_BUGFIX | GEN9_ENABLE_GPGPU_PREEMPTION); - /* Wa4x4STCOptimizationDisable:skl,bxt */ - /* WaDisablePartialResolveInVc:skl,bxt */ + /* Wa4x4STCOptimizationDisable:skl,bxt,kbl */ + /* WaDisablePartialResolveInVc:skl,bxt,kbl */ WA_SET_BIT_MASKED(CACHE_MODE_1, (GEN8_4x4_STC_OPTIMIZATION_DISABLE | GEN9_PARTIAL_RESOLVE_IN_VC_DISABLE)); - /* WaCcsTlbPrefetchDisable:skl,bxt */ + /* WaCcsTlbPrefetchDisable:skl,bxt,kbl */ WA_CLR_BIT_MASKED(GEN9_HALF_SLICE_CHICKEN5, GEN9_CCS_TLB_PREFETCH_ENABLE); @@ -980,15 +980,17 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) tmp |= HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE; WA_SET_BIT_MASKED(HDC_CHICKEN0, tmp); - /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt */ - if (IS_SKYLAKE(dev) || IS_BXT_REVID(dev, 0, BXT_REVID_B0)) + /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl */ + if (IS_SKYLAKE(dev_priv) || + IS_KABYLAKE(dev_priv) || + IS_BXT_REVID(dev_priv, 0, BXT_REVID_B0)) WA_SET_BIT_MASKED(HALF_SLICE_CHICKEN3, GEN8_SAMPLER_POWER_BYPASS_DIS); - /* WaDisableSTUnitPowerOptimization:skl,bxt */ + /* WaDisableSTUnitPowerOptimization:skl,bxt,kbl */ WA_SET_BIT_MASKED(HALF_SLICE_CHICKEN2, GEN8_ST_PO_DISABLE); - /* WaOCLCoherentLineFlush:skl,bxt */ + /* WaOCLCoherentLineFlush:skl,bxt,kbl */ I915_WRITE(GEN8_L3SQCREG4, (I915_READ(GEN8_L3SQCREG4) | GEN8_LQSC_FLUSH_COHERENT_LINES)); @@ -997,12 +999,12 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) if (ret) return ret; - /* WaEnablePreemptionGranularityControlByUMD:skl,bxt */ + /* WaEnablePreemptionGranularityControlByUMD:skl,bxt,kbl */ ret= wa_ring_whitelist_reg(engine, GEN8_CS_CHICKEN1); if (ret) return ret; - /* WaAllowUMDToModifyHDCChicken1:skl,bxt */ + /* WaAllowUMDToModifyHDCChicken1:skl,bxt,kbl */ ret = wa_ring_whitelist_reg(engine, GEN8_HDC_CHICKEN1); if (ret) return ret; @@ -1185,6 +1187,17 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine) return 0; } +static int kbl_init_workarounds(struct intel_engine_cs *engine) +{ + int ret; + + ret = gen9_init_workarounds(engine); + if (ret) + return ret; + + return 0; +} + int init_workarounds_ring(struct intel_engine_cs *engine) { struct drm_device *dev = engine->dev; @@ -1207,6 +1220,9 @@ int init_workarounds_ring(struct intel_engine_cs *engine) if (IS_BROXTON(dev)) return bxt_init_workarounds(engine); + if (IS_KABYLAKE(dev_priv)) + return kbl_init_workarounds(engine); + return 0; } -- cgit v0.10.2 From a1d97ca5b2998d137da4f4673edae472d23742e5 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:55 +0300 Subject: drm/i915/kbl: Add REVID macro Add REVID macro for kbl to limit wa applicability to particular revision range. Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-4-git-send-email-mika.kuoppala@intel.com (cherry picked from commit c033a37cd42c1b5492d95bfbc8c0891088e04b57) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7c334e9..6ddd165 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2600,6 +2600,12 @@ struct drm_i915_cmd_table { #define IS_BXT_REVID(p, since, until) (IS_BROXTON(p) && IS_REVID(p, since, until)) +#define KBL_REVID_A0 0x0 +#define KBL_REVID_B0 0x1 + +#define IS_KBL_REVID(p, since, until) \ + (IS_KABYLAKE(p) && IS_REVID(p, since, until)) + /* * The genX designation typically refers to the render engine, so render * capability related checks should use IS_GEN, while display and other checks -- cgit v0.10.2 From 89b54515d35789297611b9deca904da49a377800 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:56 +0300 Subject: drm/i915/kbl: Add WaSkipStolenMemoryFirstPage for A0 We need this for kbl a0 boards. Note that this should be also for bxt A0 but we omit that on purpose as bxt A0's are out of fashion already. References: HSD#1912158, HSD#4393097 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-5-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 6e4f10c33a8bd0df4412bc31c0f11930e0228123) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index b7ce963..44004e3 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -55,8 +55,10 @@ int i915_gem_stolen_insert_node_in_range(struct drm_i915_private *dev_priv, return -ENODEV; /* See the comment at the drm_mm_init() call for more about this check. - * WaSkipStolenMemoryFirstPage:bdw,chv (incomplete) */ - if (INTEL_INFO(dev_priv)->gen == 8 && start < 4096) + * WaSkipStolenMemoryFirstPage:bdw,chv,kbl (incomplete) + */ + if (start < 4096 && (IS_GEN8(dev_priv) || + IS_KBL_REVID(dev_priv, 0, KBL_REVID_A0))) start = 4096; mutex_lock(&dev_priv->mm.stolen_lock); -- cgit v0.10.2 From 6fd72492b382cb59beee97c7d5767f6e260620bd Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:57 +0300 Subject: drm/i915/gen9: Always apply WaForceContextSaveRestoreNonCoherent The revision id range for this workaround has changed. So apply it to all revids on all gen9. References: HSD#2134449 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-6-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 5b0e3659296cc4a1484e60640ef10780194a195b) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index bcd9e70..e6fa1e6 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -913,7 +913,6 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) { struct drm_device *dev = engine->dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t tmp; int ret; /* WaEnableLbsSlaRetryTimerDecrement:skl,bxt,kbl */ @@ -973,12 +972,10 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) WA_SET_BIT_MASKED(SLICE_ECO_CHICKEN0, PIXEL_MASK_CAMMING_DISABLE); - /* WaForceContextSaveRestoreNonCoherent:skl,bxt */ - tmp = HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT; - if (IS_SKL_REVID(dev, SKL_REVID_F0, REVID_FOREVER) || - IS_BXT_REVID(dev, BXT_REVID_B0, REVID_FOREVER)) - tmp |= HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE; - WA_SET_BIT_MASKED(HDC_CHICKEN0, tmp); + /* WaForceContextSaveRestoreNonCoherent:skl,bxt,kbl */ + WA_SET_BIT_MASKED(HDC_CHICKEN0, + HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | + HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE); /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl */ if (IS_SKYLAKE(dev_priv) || -- cgit v0.10.2 From 60f452e6147bcbe7d38cd2368cf5c7c1c27a4d38 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:58 +0300 Subject: drm/i915: Mimic skl with WaForceEnableNonCoherent Past evidence with system hangs and hsds tie WaForceEnableNonCoherent and WaDisableHDCInvalidation to WaForceContextSaveRestoreNonCoherent. Documentation states that WaForceContextSaveRestoreNonCoherent would not be needed on skl past E0 but evidence proved otherwise. See commit <510650e8b2ab> ("drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs"). In this scope consider kbl to be skl with a bigger revision than E0 so play it safe and bind these two workarounds to the WaForceContextSaveRestoreNonCoherent, and apply to all gen9. v2: fix comment (Matthew) References: HSD#2134449, HSD#2131413 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-7-git-send-email-mika.kuoppala@intel.com (cherry picked from commit bbaefe72a00c93c6ec12e029019681e3f7d7de7a) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index e6fa1e6..5c7f3cf 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -977,6 +977,27 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE); + /* WaForceEnableNonCoherent and WaDisableHDCInvalidation are + * both tied to WaForceContextSaveRestoreNonCoherent + * in some hsds for skl. We keep the tie for all gen9. The + * documentation is a bit hazy and so we want to get common behaviour, + * even though there is no clear evidence we would need both on kbl/bxt. + * This area has been source of system hangs so we play it safe + * and mimic the skl regardless of what bspec says. + * + * Use Force Non-Coherent whenever executing a 3D context. This + * is a workaround for a possible hang in the unlikely event + * a TLB invalidation occurs during a PSD flush. + */ + + /* WaForceEnableNonCoherent:skl,bxt,kbl */ + WA_SET_BIT_MASKED(HDC_CHICKEN0, + HDC_FORCE_NON_COHERENT); + + /* WaDisableHDCInvalidation:skl,bxt,kbl */ + I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | + BDW_DISABLE_HDC_INVALIDATION); + /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl */ if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv) || @@ -1096,22 +1117,6 @@ static int skl_init_workarounds(struct intel_engine_cs *engine) WA_SET_BIT_MASKED(HIZ_CHICKEN, BDW_HIZ_POWER_COMPILER_CLOCK_GATING_DISABLE); - /* This is tied to WaForceContextSaveRestoreNonCoherent */ - if (IS_SKL_REVID(dev, 0, REVID_FOREVER)) { - /* - *Use Force Non-Coherent whenever executing a 3D context. This - * is a workaround for a possible hang in the unlikely event - * a TLB invalidation occurs during a PSD flush. - */ - /* WaForceEnableNonCoherent:skl */ - WA_SET_BIT_MASKED(HDC_CHICKEN0, - HDC_FORCE_NON_COHERENT); - - /* WaDisableHDCInvalidation:skl */ - I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | - BDW_DISABLE_HDC_INVALIDATION); - } - /* WaBarrierPerformanceFixDisable:skl */ if (IS_SKL_REVID(dev, SKL_REVID_C0, SKL_REVID_D0)) WA_SET_BIT_MASKED(HDC_CHICKEN0, -- cgit v0.10.2 From 791645098219ad3fd505db89d953a16275a8c89b Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:18:59 +0300 Subject: drm/i915/kbl: Add WaEnableGapsTsvCreditFix We need this crucial workaround from skl also to all kbl revisions. Lack of it was causing system hangs on skl enabling so this is a must have. v2: Don't add revid checks to gen9 init workarounds (Arun) References: HSD#2126660 Cc: Arun Siluvery Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-8-git-send-email-mika.kuoppala@intel.com (cherry picked from commit e587f6cb0af140f3c0ea794d8616eb9a29969983) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 5c7f3cf..6d844e2 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1191,12 +1191,17 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine) static int kbl_init_workarounds(struct intel_engine_cs *engine) { + struct drm_i915_private *dev_priv = engine->dev->dev_private; int ret; ret = gen9_init_workarounds(engine); if (ret) return ret; + /* WaEnableGapsTsvCreditFix:kbl */ + I915_WRITE(GEN8_GARBCNTL, (I915_READ(GEN8_GARBCNTL) | + GEN9_GAPS_TSV_CREDIT_DISABLE)); + return 0; } -- cgit v0.10.2 From 3d042d4633d7b180e08abead7bd7de0bb194b256 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:00 +0300 Subject: drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 Add this workaround for kbl revid A0 only. v2: rebase v3: carve out a non related workaround (Chris) References: HSD#1911714 Cc: Chris Wilson Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-9-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 8401d42fd5adf709281e1700194805f393b49573) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 6d844e2..bdb3304 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1202,6 +1202,11 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_GARBCNTL, (I915_READ(GEN8_GARBCNTL) | GEN9_GAPS_TSV_CREDIT_DISABLE)); + /* WaDisableFenceDestinationToSLM:kbl (pre-prod) */ + if (IS_KBL_REVID(dev_priv, KBL_REVID_A0, KBL_REVID_A0)) + WA_SET_BIT_MASKED(HDC_CHICKEN0, + HDC_FENCE_DEST_SLM_DISABLE); + return 0; } -- cgit v0.10.2 From 9146f308d5916e20c53afe3ee0bd4dbd562a0ef9 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:01 +0300 Subject: drm/i915/kbl: Add WaDisableSDEUnitClockGating Add this workaround until upto kbl revid B0. References: HSD#1802092 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-10-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 9498dba7b4ffe40a1e2b23d7718b77e49841248f) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 3625975..bff740c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6702,11 +6702,25 @@ static void lpt_suspend_hw(struct drm_device *dev) } } +static void kabylake_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* See Bspec note for PSR2_CTL bit 31, Wa#828:kbl */ + I915_WRITE(CHICKEN_PAR1_1, + I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); + + /* WaDisableSDEUnitClockGating:kbl */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | + GEN8_SDEUNIT_CLOCK_GATE_DISABLE); +} + static void skylake_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,kbl */ + /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl */ I915_WRITE(CHICKEN_PAR1_1, I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); } @@ -7178,7 +7192,7 @@ void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv) if (IS_SKYLAKE(dev_priv)) dev_priv->display.init_clock_gating = skylake_init_clock_gating; else if (IS_KABYLAKE(dev_priv)) - dev_priv->display.init_clock_gating = skylake_init_clock_gating; + dev_priv->display.init_clock_gating = kabylake_init_clock_gating; else if (IS_BROXTON(dev_priv)) dev_priv->display.init_clock_gating = bxt_init_clock_gating; else if (IS_BROADWELL(dev_priv)) -- cgit v0.10.2 From 738fa1b3123f9a3b4374b4156ad54a2b64273f51 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:03 +0300 Subject: drm/i915/kbl: Add WaDisableLSQCROPERFforOCL Extend the scope of this workaround, already used in skl, to also take effect in kbl. v2: Fix KBL_REVID_E0 (Matthew) References: HSD#2132677 Cc: Matthew Auld Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-12-git-send-email-mika.kuoppala@intel.com (cherry picked from commit fe90581987cd5fadd2942f59f8511bcb39fdec34) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6ddd165..b0fffa0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2602,6 +2602,9 @@ struct drm_i915_cmd_table { #define KBL_REVID_A0 0x0 #define KBL_REVID_B0 0x1 +#define KBL_REVID_C0 0x2 +#define KBL_REVID_D0 0x3 +#define KBL_REVID_E0 0x4 #define IS_KBL_REVID(p, since, until) \ (IS_KABYLAKE(p) && IS_REVID(p, since, until)) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 42eac37..cf18eac 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1103,15 +1103,17 @@ static inline int gen8_emit_flush_coherentl3_wa(struct intel_engine_cs *engine, uint32_t *const batch, uint32_t index) { + struct drm_i915_private *dev_priv = engine->dev->dev_private; uint32_t l3sqc4_flush = (0x40400000 | GEN8_LQSC_FLUSH_COHERENT_LINES); /* - * WaDisableLSQCROPERFforOCL:skl + * WaDisableLSQCROPERFforOCL:skl,kbl * This WA is implemented in skl_init_clock_gating() but since * this batch updates GEN8_L3SQCREG4 with default value we need to * set this bit here to retain the WA during flush. */ - if (IS_SKL_REVID(engine->dev, 0, SKL_REVID_E0)) + if (IS_SKL_REVID(dev_priv, 0, SKL_REVID_E0) || + IS_KBL_REVID(dev_priv, 0, KBL_REVID_E0)) l3sqc4_flush |= GEN8_LQSC_RO_PERF_DIS; wa_ctx_emit(batch, index, (MI_STORE_REGISTER_MEM_GEN8 | diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index bdb3304..421e03d 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1207,6 +1207,19 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) WA_SET_BIT_MASKED(HDC_CHICKEN0, HDC_FENCE_DEST_SLM_DISABLE); + /* GEN8_L3SQCREG4 has a dependency with WA batch so any new changes + * involving this register should also be added to WA batch as required. + */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_E0)) + /* WaDisableLSQCROPERFforOCL:kbl */ + I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | + GEN8_LQSC_RO_PERF_DIS); + + /* WaDisableLSQCROPERFforOCL:kbl */ + ret = wa_ring_whitelist_reg(engine, GEN8_L3SQCREG4); + if (ret) + return ret; + return 0; } -- cgit v0.10.2 From 11b283412e165abf1ad19c1ba4bdde399944b600 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:04 +0300 Subject: drm/i915/gen9: Enable must set chicken bits in config0 reg The bspec states that these must be set in CONFIG0 for all gen9. v2: rebase v3: fix spacing (Matthew) References: HSD#2134995 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-13-git-send-email-mika.kuoppala@intel.com (cherry picked from commit b033bb6d5d3a0e51d56b3ba929a8db4e18da0892) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 80ede80..d014b8f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -220,6 +220,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define ECOCHK_PPGTT_WT_HSW (0x2<<3) #define ECOCHK_PPGTT_WB_HSW (0x3<<3) +#define GEN8_CONFIG0 _MMIO(0xD00) +#define GEN9_DEFAULT_FIXES (1 << 3 | 1 << 2 | 1 << 1) + #define GAC_ECO_BITS _MMIO(0x14090) #define ECOBITS_SNB_BIT (1<<13) #define ECOBITS_PPGTT_CACHE64B (3<<8) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index bff740c..7ae5bfd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -54,14 +54,24 @@ #define INTEL_RC6p_ENABLE (1<<1) #define INTEL_RC6pp_ENABLE (1<<2) -static void bxt_init_clock_gating(struct drm_device *dev) +static void gen9_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - /* See Bspec note for PSR2_CTL bit 31, Wa#828:bxt */ + /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl */ I915_WRITE(CHICKEN_PAR1_1, I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); + I915_WRITE(GEN8_CONFIG0, + I915_READ(GEN8_CONFIG0) | GEN9_DEFAULT_FIXES); +} + +static void bxt_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + gen9_init_clock_gating(dev); + /* WaDisableSDEUnitClockGating:bxt */ I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | GEN8_SDEUNIT_CLOCK_GATE_DISABLE); @@ -6706,9 +6716,7 @@ static void kabylake_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - /* See Bspec note for PSR2_CTL bit 31, Wa#828:kbl */ - I915_WRITE(CHICKEN_PAR1_1, - I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); + gen9_init_clock_gating(dev); /* WaDisableSDEUnitClockGating:kbl */ if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) @@ -6718,11 +6726,7 @@ static void kabylake_init_clock_gating(struct drm_device *dev) static void skylake_init_clock_gating(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; - - /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl */ - I915_WRITE(CHICKEN_PAR1_1, - I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); + gen9_init_clock_gating(dev); } static void broadwell_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From 4ac4199434ac1d847e02c61a6e9d1cb35bb91b0e Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:05 +0300 Subject: drm/i915/kbl: Add WaDisableGamClockGating According to bspec we need to disable gam unit clock gating on on kbl revids A0 and B0. References: HSD#2226858, HSD#1944358 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-14-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 8aeb7f624fbf8a68a9c67f831d4158a0f80ea920) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index d014b8f..3e16b9d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6926,6 +6926,7 @@ enum skl_disp_power_wells { #define EDRAM_SETS_IDX(cap) (((cap) >> 8) & 0x3) #define GEN6_UCGCTL1 _MMIO(0x9400) +# define GEN6_GAMUNIT_CLOCK_GATE_DISABLE (1 << 22) # define GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE (1 << 16) # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 7ae5bfd..3f0f188 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6722,6 +6722,11 @@ static void kabylake_init_clock_gating(struct drm_device *dev) if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) | GEN8_SDEUNIT_CLOCK_GATE_DISABLE); + + /* WaDisableGamClockGating:kbl */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | + GEN6_GAMUNIT_CLOCK_GATE_DISABLE); } static void skylake_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From b90420467232529a4448364d8bd860fc0176d3b6 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:06 +0300 Subject: drm/i915/kbl: Add WaDisableDynamicCreditSharing Bspec states that we need to turn off dynamic credit sharing on kbl revid a0 and b0. This happens by writing bit 28 on 0x4ab8. References: HSD#2225601, HSD#2226938, HSD#2225763 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-15-git-send-email-mika.kuoppala@intel.com (cherry picked from commit c0b730d572ea00d427f6112b17982c6b9d5e97bb) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3e16b9d..b7cfb38 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1672,6 +1672,9 @@ enum skl_disp_power_wells { #define GEN7_TLB_RD_ADDR _MMIO(0x4700) +#define GAMT_CHKN_BIT_REG _MMIO(0x4ab8) +#define GAMT_CHKN_DISABLE_DYNAMIC_CREDIT_SHARING (1<<28) + #if 0 #define PRB0_TAIL _MMIO(0x2030) #define PRB0_HEAD _MMIO(0x2034) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 421e03d..8106a70 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1202,6 +1202,11 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_GARBCNTL, (I915_READ(GEN8_GARBCNTL) | GEN9_GAPS_TSV_CREDIT_DISABLE)); + /* WaDisableDynamicCreditSharing:kbl */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + WA_SET_BIT(GAMT_CHKN_BIT_REG, + GAMT_CHKN_DISABLE_DYNAMIC_CREDIT_SHARING); + /* WaDisableFenceDestinationToSLM:kbl (pre-prod) */ if (IS_KBL_REVID(dev_priv, KBL_REVID_A0, KBL_REVID_A0)) WA_SET_BIT_MASKED(HDC_CHICKEN0, -- cgit v0.10.2 From 7b9005cd45f34f5c87fd2e28f4e56b348af4ddc5 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:07 +0300 Subject: drm/i915: Add WaInsertDummyPushConstP for bxt and kbl Add this workaround for both bxt and kbl up to until rev B0. References: HSD#2136703 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-16-git-send-email-mika.kuoppala@intel.com (cherry picked from commit ad2bdb44b19529ba992bd0b7667e91b14fe9a9ee) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b7cfb38..349470d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6084,6 +6084,7 @@ enum skl_disp_power_wells { # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) # define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14) #define COMMON_SLICE_CHICKEN2 _MMIO(0x7014) +# define GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION (1<<8) # define GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE (1<<0) #define HIZ_CHICKEN _MMIO(0x7018) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 8106a70..da9d243 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1186,6 +1186,11 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine) return ret; } + /* WaInsertDummyPushConstPs:bxt */ + if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_B0)) + WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, + GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); + return 0; } @@ -1220,6 +1225,11 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | GEN8_LQSC_RO_PERF_DIS); + /* WaInsertDummyPushConstPs:kbl */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, + GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); + /* WaDisableLSQCROPERFforOCL:kbl */ ret = wa_ring_whitelist_reg(engine, GEN8_L3SQCREG4); if (ret) -- cgit v0.10.2 From a725e1dc4e16a34e3de79b0a6db2ef608fecae4c Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:10 +0300 Subject: drm/i915/kbl: Add WaForGAMHang Add this workaround for A0 and B0 revisions References: HSD#2226935 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-19-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 0b2d0934edceff9905b1202d0e7e91f1b6228485) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index cf18eac..3138d2f 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1689,9 +1689,10 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request, struct intel_ringbuffer *ringbuf = request->ringbuf; struct intel_engine_cs *engine = ringbuf->engine; u32 scratch_addr = engine->scratch.gtt_offset + 2 * CACHELINE_BYTES; - bool vf_flush_wa = false; + bool vf_flush_wa = false, dc_flush_wa = false; u32 flags = 0; int ret; + int len; flags |= PIPE_CONTROL_CS_STALL; @@ -1718,9 +1719,21 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request, */ if (IS_GEN9(engine->dev)) vf_flush_wa = true; + + /* WaForGAMHang:kbl */ + if (IS_KBL_REVID(request->i915, 0, KBL_REVID_B0)) + dc_flush_wa = true; } - ret = intel_ring_begin(request, vf_flush_wa ? 12 : 6); + len = 6; + + if (vf_flush_wa) + len += 6; + + if (dc_flush_wa) + len += 12; + + ret = intel_ring_begin(request, len); if (ret) return ret; @@ -1733,12 +1746,31 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request, intel_logical_ring_emit(ringbuf, 0); } + if (dc_flush_wa) { + intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); + intel_logical_ring_emit(ringbuf, PIPE_CONTROL_DC_FLUSH_ENABLE); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + } + intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); intel_logical_ring_emit(ringbuf, flags); intel_logical_ring_emit(ringbuf, scratch_addr); intel_logical_ring_emit(ringbuf, 0); intel_logical_ring_emit(ringbuf, 0); intel_logical_ring_emit(ringbuf, 0); + + if (dc_flush_wa) { + intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); + intel_logical_ring_emit(ringbuf, PIPE_CONTROL_CS_STALL); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + intel_logical_ring_emit(ringbuf, 0); + } + intel_logical_ring_advance(ringbuf); return 0; -- cgit v0.10.2 From 3af5f1137c8b5981c754e47d2c233bc3013d2d00 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:11 +0300 Subject: drm/i915/kbl: Add WaDisableGafsUnitClkGating MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to disable clock gating in this unit to work around hardware issue causing possible corruption/hang. v2: name the bit (Ville) v3: leave the fix enabled for 2227050 and set correct bit (Matthew) v4: Split out the skl part in separate commit for easier backport References: HSD#2227156, HSD#2227050 Cc: Ville Syrjälä Cc: Matthew Auld Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-20-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 4de5d7ccbccc88d2f7b1bcdc2180196ded7db8b8) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index da9d243..a88ac27 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1230,6 +1230,9 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); + /* WaDisableGafsUnitClkGating:kbl */ + WA_SET_BIT(GEN7_UCGCTL4, GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); + /* WaDisableLSQCROPERFforOCL:kbl */ ret = wa_ring_whitelist_reg(engine, GEN8_L3SQCREG4); if (ret) -- cgit v0.10.2 From 0a3e3f047b13c04cd69bdb5a242330566259fa48 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:12 +0300 Subject: drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing This is needed for all kbl revision. v2: Don't add revid checks to generic gen9 init (Arun) References: HSD#2135593 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-21-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 954337aa96a31f6d4baf1e40ac219fbb1b1d92f4) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index a88ac27..279614c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1233,6 +1233,11 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) /* WaDisableGafsUnitClkGating:kbl */ WA_SET_BIT(GEN7_UCGCTL4, GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); + /* WaDisableSbeCacheDispatchPortSharing:kbl */ + WA_SET_BIT_MASKED( + GEN7_HALF_SLICE_CHICKEN1, + GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); + /* WaDisableLSQCROPERFforOCL:kbl */ ret = wa_ring_whitelist_reg(engine, GEN8_L3SQCREG4); if (ret) -- cgit v0.10.2 From 0e51c0bdc0e6503c9c1cf2c41b2f1ae4e9cf9a8b Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:13 +0300 Subject: drm/i915/gen9: Add WaEnableChickenDCPR Workaround for display underrun issues with Y & Yf Tiling. Set this on all gen9 as stated by bspec. v2: proper workaround name References: HSD#2136383, BSID#857 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-22-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 590e8ff04bc0182dce97228e5e352d6413d80456) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 349470d..87655ac 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6059,6 +6059,9 @@ enum skl_disp_power_wells { #define HSW_NDE_RSTWRN_OPT _MMIO(0x46408) #define RESET_PCH_HANDSHAKE_ENABLE (1<<4) +#define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430) +#define MASK_WAKEMEM (1<<13) + #define SKL_DFSM _MMIO(0x51000) #define SKL_DFSM_CDCLK_LIMIT_MASK (3 << 23) #define SKL_DFSM_CDCLK_LIMIT_675 (0 << 23) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 3f0f188..362800b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -64,6 +64,10 @@ static void gen9_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN8_CONFIG0, I915_READ(GEN8_CONFIG0) | GEN9_DEFAULT_FIXES); + + /* WaEnableChickenDCPR:skl,bxt,kbl */ + I915_WRITE(GEN8_CHICKEN_DCPR_1, + I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM); } static void bxt_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From 703d1282d513617d9561760309e9acd902c723a7 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:15 +0300 Subject: drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch This workaround for bdw and chv, is also needed for kbl A0. References: HSD#1911519, BSID#569 Signed-off-by: Mika Kuoppala Reviewed-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-24-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 066d462888514af727008a450f4078b1a23d5cbe) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 3138d2f..7f2d841 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1275,6 +1275,7 @@ static int gen9_init_indirectctx_bb(struct intel_engine_cs *engine, { int ret; struct drm_device *dev = engine->dev; + struct drm_i915_private *dev_priv = dev->dev_private; uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS); /* WaDisableCtxRestoreArbitration:skl,bxt */ @@ -1288,6 +1289,22 @@ static int gen9_init_indirectctx_bb(struct intel_engine_cs *engine, return ret; index = ret; + /* WaClearSlmSpaceAtContextSwitch:kbl */ + /* Actual scratch location is at 128 bytes offset */ + if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_A0)) { + uint32_t scratch_addr + = engine->scratch.gtt_offset + 2*CACHELINE_BYTES; + + wa_ctx_emit(batch, index, GFX_OP_PIPE_CONTROL(6)); + wa_ctx_emit(batch, index, (PIPE_CONTROL_FLUSH_L3 | + PIPE_CONTROL_GLOBAL_GTT_IVB | + PIPE_CONTROL_CS_STALL | + PIPE_CONTROL_QW_WRITE)); + wa_ctx_emit(batch, index, scratch_addr); + wa_ctx_emit(batch, index, 0); + wa_ctx_emit(batch, index, 0); + wa_ctx_emit(batch, index, 0); + } /* Pad to end of cacheline */ while (index % CACHELINE_DWORDS) wa_ctx_emit(batch, index, MI_NOOP); -- cgit v0.10.2 From f20b1ba04e917be9cadd3171a99568a1badb8b1b Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:16 +0300 Subject: drm/i915/gen9: Add WaFbcTurnOffFbcWatermark MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to bspec this prevents screen corruption when fbc is used. v2: This workaround has a name, use it (Ville) v3: remove bogus gen check on ilk/vlv wm path (Ville) References: HSD#2135555, HSD#2137270, BSID#562 Cc: Paulo Zanoni Cc: Ville Syrjälä Signed-off-by: Mika Kuoppala Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-25-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 0f78dee6f06a9399d4bdf79575094cc761b872ac) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 362800b..5eb48ad 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -68,6 +68,10 @@ static void gen9_init_clock_gating(struct drm_device *dev) /* WaEnableChickenDCPR:skl,bxt,kbl */ I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM); + + /* WaFbcTurnOffFbcWatermark:skl,bxt,kbl */ + I915_WRITE(DISP_ARB_CTL, + I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS); } static void bxt_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From 5b889896be07cb12f0401dc2cfdec6eb6413c774 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:17 +0300 Subject: drm/i915/gen9: Add WaFbcWakeMemOn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Set bit 8 in 0x43224 to prevent screen corruption and system hangs on high memory bandwidth conditions. The same wa also suggest setting bit 31 on ARB_CTL. According to another workaround we gain better idle power savings when FBC is enabled. v2: use correct workaround name v3: split out overlapping wa for corruption avoidance (Ville) References: HSD#2137218, HSD#2227171, HSD#2136579, BSID#883 Cc: Paulo Zanoni Cc: Ville Syrjälä Signed-off-by: Mika Kuoppala Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-26-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 303d4ea522e8672a1b62d968a5b6764929adc292) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 87655ac..235dfac 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6046,6 +6046,7 @@ enum skl_disp_power_wells { #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) #define DISP_ARB_CTL _MMIO(0x45000) +#define DISP_FBC_MEMORY_WAKE (1<<31) #define DISP_TILE_SURFACE_SWIZZLING (1<<13) #define DISP_FBC_WM_DIS (1<<15) #define DISP_ARB_CTL2 _MMIO(0x45004) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 5eb48ad..61113a2 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -70,8 +70,10 @@ static void gen9_init_clock_gating(struct drm_device *dev) I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM); /* WaFbcTurnOffFbcWatermark:skl,bxt,kbl */ - I915_WRITE(DISP_ARB_CTL, - I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS); + /* WaFbcWakeMemOn:skl,bxt,kbl */ + I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) | + DISP_FBC_WM_DIS | + DISP_FBC_MEMORY_WAKE); } static void bxt_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From c584e2d38fb84513944feeb25072dd8b17a6d3b6 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:18 +0300 Subject: drm/i195/fbc: Add WaFbcNukeOnHostModify MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bspec states that we need to set nuke on modify all to prevent screen corruption with fbc on skl and kbl. v2: proper workaround name References: HSD#2227109, HSDES#1404569388 Cc: Ville Syrjälä Signed-off-by: Mika Kuoppala Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-27-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 031cd8c85aefad31e7af91eba7bc4735a6dfcc79) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 235dfac..3b37428 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2206,6 +2206,7 @@ enum skl_disp_power_wells { #define ILK_DPFC_STATUS _MMIO(0x43210) #define ILK_DPFC_FENCE_YOFF _MMIO(0x43218) #define ILK_DPFC_CHICKEN _MMIO(0x43224) +#define ILK_DPFC_NUKE_ON_ANY_MODIFICATION (1<<23) #define ILK_FBC_RT_BASE _MMIO(0x2128) #define ILK_FBC_RT_VALID (1<<0) #define SNB_FBC_FRONT_BUFFER (1<<1) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 61113a2..074d6a5 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6737,11 +6737,21 @@ static void kabylake_init_clock_gating(struct drm_device *dev) if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) | GEN6_GAMUNIT_CLOCK_GATE_DISABLE); + + /* WaFbcNukeOnHostModify:kbl */ + I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) | + ILK_DPFC_NUKE_ON_ANY_MODIFICATION); } static void skylake_init_clock_gating(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; + gen9_init_clock_gating(dev); + + /* WaFbcNukeOnHostModify:skl */ + I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) | + ILK_DPFC_NUKE_ON_ANY_MODIFICATION); } static void broadwell_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From a89bd7beb1791ad5ed634989b14c764114a68e53 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 7 Jun 2016 17:19:19 +0300 Subject: drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add this fbc related workaround for all gen9 Cc: Ville Syrjälä Signed-off-by: Mika Kuoppala Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1465309159-30531-28-git-send-email-mika.kuoppala@intel.com (cherry picked from commit d1b4eefdea6d63aa15321f539feec298d8aefdc1) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3b37428..b2fbbfa 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2206,6 +2206,7 @@ enum skl_disp_power_wells { #define ILK_DPFC_STATUS _MMIO(0x43210) #define ILK_DPFC_FENCE_YOFF _MMIO(0x43218) #define ILK_DPFC_CHICKEN _MMIO(0x43224) +#define ILK_DPFC_DISABLE_DUMMY0 (1<<8) #define ILK_DPFC_NUKE_ON_ANY_MODIFICATION (1<<23) #define ILK_FBC_RT_BASE _MMIO(0x2128) #define ILK_FBC_RT_VALID (1<<0) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 074d6a5..2863b92 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -74,6 +74,10 @@ static void gen9_init_clock_gating(struct drm_device *dev) I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS | DISP_FBC_MEMORY_WAKE); + + /* WaFbcHighMemBwCorruptionAvoidance:skl,bxt,kbl */ + I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) | + ILK_DPFC_DISABLE_DUMMY0); } static void bxt_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From 12be73a0f13ad5a044346d564804b4058426d4c2 Mon Sep 17 00:00:00 2001 From: Tim Gore Date: Mon, 13 Jun 2016 12:15:01 +0100 Subject: drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate This patch enables a workaround for a mid thread preemption issue where a hardware timing problem can prevent the context restore from happening, leading to a hang. v2: move to gen9_init_workarounds (Arun) v3: move to start of gen9_init_workarounds (Arun) Signed-off-by: Tim Gore Reviewed-by: Arun Siluvery Signed-off-by: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/1465816501-25557-1-git-send-email-tim.gore@intel.com (cherry picked from commit a8ab5ed5e1bf856eceaab5579236de6f92822b9f) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b2fbbfa..3fcf7dd 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1810,6 +1810,10 @@ enum skl_disp_power_wells { #define GEN9_IZ_HASHING_MASK(slice) (0x3 << ((slice) * 2)) #define GEN9_IZ_HASHING(slice, val) ((val) << ((slice) * 2)) +/* chicken reg for WaConextSwitchWithConcurrentTLBInvalidate */ +#define GEN9_CSFE_CHICKEN1_RCS _MMIO(0x20D4) +#define GEN9_PREEMPT_GPGPU_SYNC_SWITCH_DISABLE (1 << 2) + /* WaClearTdlStateAckDirtyBits */ #define GEN8_STATE_ACK _MMIO(0x20F0) #define GEN9_STATE_ACK_SLICE1 _MMIO(0x20F8) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 279614c..68c5af0 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -915,6 +915,9 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine) struct drm_i915_private *dev_priv = dev->dev_private; int ret; + /* WaConextSwitchWithConcurrentTLBInvalidate:skl,bxt,kbl */ + I915_WRITE(GEN9_CSFE_CHICKEN1_RCS, _MASKED_BIT_ENABLE(GEN9_PREEMPT_GPGPU_SYNC_SWITCH_DISABLE)); + /* WaEnableLbsSlaRetryTimerDecrement:skl,bxt,kbl */ I915_WRITE(BDW_SCRATCH1, I915_READ(BDW_SCRATCH1) | GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE); -- cgit v0.10.2 From bc7135b9a430520448590ffeb1ff54c0b4dfd8d5 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Fri, 1 Jul 2016 17:07:12 -0700 Subject: drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. Some Kabylake SKUs are going to use Kabypoint PCH. It is mainly for Halo and DT ones. >From our specs it doesn't seem that KBP brings any change on the display south engine. So let's consider this as a continuation of SunrisePoint, i.e., SPT+. Since it is easy to get confused by a letter change: KBL = Kabylake - CPU/GPU codename. KBP = Kabypoint - PCH codename. Signed-off-by: Rodrigo Vivi Reviewed-by: Ander Conselvan de Oliveira Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96826 Link: http://patchwork.freedesktop.org/patch/msgid/1467418032-15167-1-git-send-email-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit 22dea0be50b2eb0bafd3c82e1fb080113e0c889e) Signed-off-by: Mika Kuoppala diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index f313b4d..85c4deb 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -512,6 +512,10 @@ void intel_detect_pch(struct drm_device *dev) DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n"); WARN_ON(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev)); + } else if (id == INTEL_PCH_KBP_DEVICE_ID_TYPE) { + dev_priv->pch_type = PCH_KBP; + DRM_DEBUG_KMS("Found KabyPoint PCH\n"); + WARN_ON(!IS_KABYLAKE(dev)); } else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) || (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) || ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) && diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b0fffa0..bc3f2e6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -990,6 +990,7 @@ enum intel_pch { PCH_CPT, /* Cougarpoint PCH */ PCH_LPT, /* Lynxpoint PCH */ PCH_SPT, /* Sunrisepoint PCH */ + PCH_KBP, /* Kabypoint PCH */ PCH_NOP, }; @@ -2717,11 +2718,13 @@ struct drm_i915_cmd_table { #define INTEL_PCH_LPT_LP_DEVICE_ID_TYPE 0x9c00 #define INTEL_PCH_SPT_DEVICE_ID_TYPE 0xA100 #define INTEL_PCH_SPT_LP_DEVICE_ID_TYPE 0x9D00 +#define INTEL_PCH_KBP_DEVICE_ID_TYPE 0xA200 #define INTEL_PCH_P2X_DEVICE_ID_TYPE 0x7100 #define INTEL_PCH_P3X_DEVICE_ID_TYPE 0x7000 #define INTEL_PCH_QEMU_DEVICE_ID_TYPE 0x2900 /* qemu q35 has 2918 */ #define INTEL_PCH_TYPE(dev) (__I915__(dev)->pch_type) +#define HAS_PCH_KBP(dev) (INTEL_PCH_TYPE(dev) == PCH_KBP) #define HAS_PCH_SPT(dev) (INTEL_PCH_TYPE(dev) == PCH_SPT) #define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT) #define HAS_PCH_LPT_LP(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 2f6fd33..aab47f7 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2471,7 +2471,7 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) I915_WRITE(SDEIIR, iir); ret = IRQ_HANDLED; - if (HAS_PCH_SPT(dev_priv)) + if (HAS_PCH_SPT(dev_priv) || HAS_PCH_KBP(dev_priv)) spt_irq_handler(dev, iir); else cpt_irq_handler(dev, iir); @@ -4661,7 +4661,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv) dev->driver->disable_vblank = gen8_disable_vblank; if (IS_BROXTON(dev)) dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup; - else if (HAS_PCH_SPT(dev)) + else if (HAS_PCH_SPT(dev) || HAS_PCH_KBP(dev)) dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup; else dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 8357d57..aba9409 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -1731,7 +1731,8 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel) panel->backlight.set = bxt_set_backlight; panel->backlight.get = bxt_get_backlight; panel->backlight.hz_to_pwm = bxt_hz_to_pwm; - } else if (HAS_PCH_LPT(dev_priv) || HAS_PCH_SPT(dev_priv)) { + } else if (HAS_PCH_LPT(dev_priv) || HAS_PCH_SPT(dev_priv) || + HAS_PCH_KBP(dev_priv)) { panel->backlight.setup = lpt_setup_backlight; panel->backlight.enable = lpt_enable_backlight; panel->backlight.disable = lpt_disable_backlight; -- cgit v0.10.2 From 6a5029e66404462a3322dba8e35615bd09332081 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 15 Jul 2016 09:32:54 -0700 Subject: Input: ts4800-ts - add missing of_node_put after calling of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c index 3c3dd78..fed73ee 100644 --- a/drivers/input/touchscreen/ts4800-ts.c +++ b/drivers/input/touchscreen/ts4800-ts.c @@ -118,6 +118,13 @@ static int ts4800_parse_dt(struct platform_device *pdev, return -ENODEV; } + ts->regmap = syscon_node_to_regmap(syscon_np); + of_node_put(syscon_np); + if (IS_ERR(ts->regmap)) { + dev_err(dev, "cannot get parent's regmap\n"); + return PTR_ERR(ts->regmap); + } + error = of_property_read_u32_index(np, "syscon", 1, ®); if (error < 0) { dev_err(dev, "no offset in syscon\n"); @@ -134,12 +141,6 @@ static int ts4800_parse_dt(struct platform_device *pdev, ts->bit = BIT(bit); - ts->regmap = syscon_node_to_regmap(syscon_np); - if (IS_ERR(ts->regmap)) { - dev_err(dev, "cannot get parent's regmap\n"); - return PTR_ERR(ts->regmap); - } - return 0; } -- cgit v0.10.2 From 0ba169ac3600ae4032ee14b4192e6bf5d67723f5 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 14 Jul 2016 15:38:43 -0700 Subject: EDAC, sb_edac: Fix Knights Landing In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") I broke Knights Landing because I failed to notice that it called a wrapper macro "sbridge_get_all_devices_knl" instead of "sbridge_get_all_devices" like all the other types. Now that we include the processor type in the pci_id_table structure we can skip the wrappers and just have the sbridge_get_all_devices() check the type to decide whether to allow duplicate devices and controllers to have registers spread across buses. Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Tested-by: Lukasz Odzioba Acked-by: Aristeu Rozanski Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 6744d88..4fb2eb7 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -2378,22 +2378,19 @@ static int sbridge_get_onedevice(struct pci_dev **prev, * @num_mc: pointer to the memory controllers count, to be incremented in case * of success. * @table: model specific table - * @allow_dups: allow for multiple devices to exist with the same device id - * (as implemented, this isn't expected to work correctly in the - * multi-socket case). - * @multi_bus: don't assume devices on different buses belong to different - * memory controllers. * * returns 0 in case of success or error code */ -static int sbridge_get_all_devices_full(u8 *num_mc, - const struct pci_id_table *table, - int allow_dups, - int multi_bus) +static int sbridge_get_all_devices(u8 *num_mc, + const struct pci_id_table *table) { int i, rc; struct pci_dev *pdev = NULL; + int allow_dups = 0; + int multi_bus = 0; + if (table->type == KNIGHTS_LANDING) + allow_dups = multi_bus = 1; while (table && table->descr) { for (i = 0; i < table->n_devs; i++) { if (!allow_dups || i == 0 || @@ -2420,11 +2417,6 @@ static int sbridge_get_all_devices_full(u8 *num_mc, return 0; } -#define sbridge_get_all_devices(num_mc, table) \ - sbridge_get_all_devices_full(num_mc, table, 0, 0) -#define sbridge_get_all_devices_knl(num_mc, table) \ - sbridge_get_all_devices_full(num_mc, table, 1, 1) - static int sbridge_mci_bind_devs(struct mem_ctl_info *mci, struct sbridge_dev *sbridge_dev) { -- cgit v0.10.2 From aa93d1fee85c890a34f2510a310e55ee76a27848 Mon Sep 17 00:00:00 2001 From: James Patrick-Evans Date: Fri, 15 Jul 2016 16:40:45 +0100 Subject: media: fix airspy usb probe error path Fix a memory leak on probe error of the airspy usb device driver. The problem is triggered when more than 64 usb devices register with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV. The memory leak is caused by the probe function of the airspy driver mishandeling errors and not freeing the corresponding control structures when an error occours registering the device to v4l2 core. A badusb device can emulate 64 of these devices, and then through continual emulated connect/disconnect of the 65th device, cause the kernel to run out of RAM and crash the kernel, thus causing a local DOS vulnerability. Fixes CVE-2016-5400 Signed-off-by: James Patrick-Evans Reviewed-by: Kees Cook Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Linus Torvalds diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c index 87c1293..92d9d42 100644 --- a/drivers/media/usb/airspy/airspy.c +++ b/drivers/media/usb/airspy/airspy.c @@ -1072,7 +1072,7 @@ static int airspy_probe(struct usb_interface *intf, if (ret) { dev_err(s->dev, "Failed to register as video device (%d)\n", ret); - goto err_unregister_v4l2_dev; + goto err_free_controls; } dev_info(s->dev, "Registered as %s\n", video_device_node_name(&s->vdev)); @@ -1081,7 +1081,6 @@ static int airspy_probe(struct usb_interface *intf, err_free_controls: v4l2_ctrl_handler_free(&s->hdl); -err_unregister_v4l2_dev: v4l2_device_unregister(&s->v4l2_dev); err_free_mem: kfree(s); -- cgit v0.10.2 From 083ae308280d13d187512b9babe3454342a7987e Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 14 Jul 2016 11:38:40 -0400 Subject: tcp: enable per-socket rate limiting of all 'challenge acks' The per-socket rate limit for 'challenge acks' was introduced in the context of limiting ack loops: commit f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock") And I think it can be extended to rate limit all 'challenge acks' on a per-socket basis. Since we have the global tcp_challenge_ack_limit, this patch allows for tcp_challenge_ack_limit to be set to a large value and effectively rely on the per-socket limit, or set tcp_challenge_ack_limit to a lower value and still prevents a single connections from consuming the entire challenge ack quota. It further moves in the direction of eliminating the global limit at some point, as Eric Dumazet has suggested. This a follow-up to: Subject: tcp: make challenge acks less predictable Cc: Eric Dumazet Cc: David S. Miller Cc: Neal Cardwell Cc: Yuchung Cheng Cc: Yue Cao Signed-off-by: Jason Baron Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 91868bb..42bf89a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3421,6 +3421,23 @@ static int tcp_ack_update_window(struct sock *sk, const struct sk_buff *skb, u32 return flag; } +static bool __tcp_oow_rate_limited(struct net *net, int mib_idx, + u32 *last_oow_ack_time) +{ + if (*last_oow_ack_time) { + s32 elapsed = (s32)(tcp_time_stamp - *last_oow_ack_time); + + if (0 <= elapsed && elapsed < sysctl_tcp_invalid_ratelimit) { + NET_INC_STATS(net, mib_idx); + return true; /* rate-limited: don't send yet! */ + } + } + + *last_oow_ack_time = tcp_time_stamp; + + return false; /* not rate-limited: go ahead, send dupack now! */ +} + /* Return true if we're currently rate-limiting out-of-window ACKs and * thus shouldn't send a dupack right now. We rate-limit dupacks in * response to out-of-window SYNs or ACKs to mitigate ACK loops or DoS @@ -3434,21 +3451,9 @@ bool tcp_oow_rate_limited(struct net *net, const struct sk_buff *skb, /* Data packets without SYNs are not likely part of an ACK loop. */ if ((TCP_SKB_CB(skb)->seq != TCP_SKB_CB(skb)->end_seq) && !tcp_hdr(skb)->syn) - goto not_rate_limited; - - if (*last_oow_ack_time) { - s32 elapsed = (s32)(tcp_time_stamp - *last_oow_ack_time); - - if (0 <= elapsed && elapsed < sysctl_tcp_invalid_ratelimit) { - NET_INC_STATS(net, mib_idx); - return true; /* rate-limited: don't send yet! */ - } - } - - *last_oow_ack_time = tcp_time_stamp; + return false; -not_rate_limited: - return false; /* not rate-limited: go ahead, send dupack now! */ + return __tcp_oow_rate_limited(net, mib_idx, last_oow_ack_time); } /* RFC 5961 7 [ACK Throttling] */ @@ -3461,9 +3466,9 @@ static void tcp_send_challenge_ack(struct sock *sk, const struct sk_buff *skb) u32 count, now; /* First check our per-socket dupack rate limit. */ - if (tcp_oow_rate_limited(sock_net(sk), skb, - LINUX_MIB_TCPACKSKIPPEDCHALLENGE, - &tp->last_oow_ack_time)) + if (__tcp_oow_rate_limited(sock_net(sk), + LINUX_MIB_TCPACKSKIPPEDCHALLENGE, + &tp->last_oow_ack_time)) return; /* Then check host-wide RFC 5961 rate limit. */ -- cgit v0.10.2 From c961e877cff4b669788900a7e12386f67efbe2d3 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Thu, 14 Jul 2016 11:27:16 -0700 Subject: r8152: add MODULE_VERSION ethtool -i provides a driver version that is hard coded. Export the same value via "modinfo". Signed-off-by: Grant Grundler Signed-off-by: David S. Miller diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 63f4018..e9654a6 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4425,3 +4425,4 @@ module_usb_driver(rtl8152_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); -- cgit v0.10.2 From 3e0a396546450536679ae4d3bd70290ce0b0c79c Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 11 Sep 2015 21:39:33 +0200 Subject: xfs: fix type confusion in xfs_ioc_swapext Without this check, the following XFS_I invocations would return bad pointers when used on non-XFS inodes (perhaps pointers into preceding allocator chunks). This could be used by an attacker to trick xfs_swap_extents into performing locking operations on attacker-chosen structures in kernel memory, potentially leading to code execution in the kernel. (I have not investigated how likely this is to be usable for an attack in practice.) Signed-off-by: Jann Horn Cc: Andy Lutomirski Cc: Dave Chinner Signed-off-by: Linus Torvalds diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index dbca737..63a6ff2 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1575,6 +1575,12 @@ xfs_ioc_swapext( goto out_put_tmp_file; } + if (f.file->f_op != &xfs_file_operations || + tmp.file->f_op != &xfs_file_operations) { + error = -EINVAL; + goto out_put_tmp_file; + } + ip = XFS_I(file_inode(f.file)); tip = XFS_I(file_inode(tmp.file)); -- cgit v0.10.2 From 6277d46b10a0b35c83656f085cf8e32ded6fdd60 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 15 Jul 2016 11:14:58 +0200 Subject: mlxsw: spectrum: Force link training according to admin state When setting a new speed we need to disable and enable the port for the changes to take effect. We currently only do that if the operational state of the port is up. However, setting a new speed following link training failure will require us to explicitly set the port down and then up. Instead, disable and enable the port based on its administrative state. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 660429e..5ccdf22 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -171,23 +171,6 @@ static int mlxsw_sp_port_admin_status_set(struct mlxsw_sp_port *mlxsw_sp_port, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(paos), paos_pl); } -static int mlxsw_sp_port_oper_status_get(struct mlxsw_sp_port *mlxsw_sp_port, - bool *p_is_up) -{ - struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; - char paos_pl[MLXSW_REG_PAOS_LEN]; - u8 oper_status; - int err; - - mlxsw_reg_paos_pack(paos_pl, mlxsw_sp_port->local_port, 0); - err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(paos), paos_pl); - if (err) - return err; - oper_status = mlxsw_reg_paos_oper_status_get(paos_pl); - *p_is_up = oper_status == MLXSW_PORT_ADMIN_STATUS_UP ? true : false; - return 0; -} - static int mlxsw_sp_port_dev_addr_set(struct mlxsw_sp_port *mlxsw_sp_port, unsigned char *addr) { @@ -1493,7 +1476,6 @@ static int mlxsw_sp_port_set_settings(struct net_device *dev, u32 eth_proto_new; u32 eth_proto_cap; u32 eth_proto_admin; - bool is_up; int err; speed = ethtool_cmd_speed(cmd); @@ -1525,12 +1507,7 @@ static int mlxsw_sp_port_set_settings(struct net_device *dev, return err; } - err = mlxsw_sp_port_oper_status_get(mlxsw_sp_port, &is_up); - if (err) { - netdev_err(dev, "Failed to get oper status"); - return err; - } - if (!is_up) + if (!netif_running(dev)) return 0; err = mlxsw_sp_port_admin_status_set(mlxsw_sp_port, false); -- cgit v0.10.2 From c3f1576810affced47684e04a08c1ffa845144c9 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 15 Jul 2016 11:14:59 +0200 Subject: mlxsw: spectrum: Indicate support for autonegotiation The device supports link autonegotiation, so let the user know about it by indicating support via ethtool ops. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 5ccdf22..3740800 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -1417,7 +1417,8 @@ static int mlxsw_sp_port_get_settings(struct net_device *dev, cmd->supported = mlxsw_sp_from_ptys_supported_port(eth_proto_cap) | mlxsw_sp_from_ptys_supported_link(eth_proto_cap) | - SUPPORTED_Pause | SUPPORTED_Asym_Pause; + SUPPORTED_Pause | SUPPORTED_Asym_Pause | + SUPPORTED_Autoneg; cmd->advertising = mlxsw_sp_from_ptys_advert_link(eth_proto_admin); mlxsw_sp_from_ptys_speed_duplex(netif_carrier_ok(dev), eth_proto_oper, cmd); -- cgit v0.10.2 From 7347180dcaed9c5582732f9372ac940b9b1a907d Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 15 Jul 2016 11:15:00 +0200 Subject: mlxsw: spectrum: Don't emit errors when PFC is disabled We can't have PAUSE frames and PFC both enabled on the same port, but the fact that ieee_setpfc() was called doesn't necessarily mean PFC is enabled. Only emit errors when PAUSE frames and PFC are enabled simultaneously. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 0b32366..5d4b1e7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -351,7 +351,8 @@ static int mlxsw_sp_dcbnl_ieee_setpfc(struct net_device *dev, struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); int err; - if (mlxsw_sp_port->link.tx_pause || mlxsw_sp_port->link.rx_pause) { + if ((mlxsw_sp_port->link.tx_pause || mlxsw_sp_port->link.rx_pause) && + pfc->pfc_en) { netdev_err(dev, "PAUSE frames already enabled on port\n"); return -EINVAL; } -- cgit v0.10.2 From 28f5275e4aab97680c8243ec26e202e44c99e5bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 15 Jul 2016 11:15:01 +0200 Subject: mlxsw: spectrum: Prevent overwrite of DCB capability fields The number of supported traffic classes that can have ETS and PFC simultaneously enabled is not subject to user configuration, so make sure we always initialize them to the correct values following a set operation. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 5d4b1e7..4af3f27 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -249,6 +249,7 @@ static int mlxsw_sp_dcbnl_ieee_setets(struct net_device *dev, return err; memcpy(mlxsw_sp_port->dcb.ets, ets, sizeof(*ets)); + mlxsw_sp_port->dcb.ets->ets_cap = IEEE_8021QAZ_MAX_TCS; return 0; } @@ -372,6 +373,7 @@ static int mlxsw_sp_dcbnl_ieee_setpfc(struct net_device *dev, } memcpy(mlxsw_sp_port->dcb.pfc, pfc, sizeof(*pfc)); + mlxsw_sp_port->dcb.pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; return 0; -- cgit v0.10.2 From 11719a58bdf7724c463db54ea2abcec54a87b69c Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 15 Jul 2016 11:15:02 +0200 Subject: mlxsw: spectrum: Prevent invalid ingress buffer mapping Packets entering the switch are mapped to a Switch Priority (SP) according to their PCP value (untagged frames are mapped to SP 0). The packets are classified to a priority group (PG) buffer in the port's headroom according to their SP. The switch maintains another mapping (SP to IEEE priority), which is used to generate PFC frames for lossless PGs. This mapping is initialized to IEEE = SP % 8. Therefore, when mapping SP 'x' to PG 'y' we create a situation in which an IEEE priority is mapped to two different PGs: IEEE 'x' ---> SP 'x' ---> PG 'y' IEEE 'x' ---> SP 'x + 8' ---> PG '0' (default) Which is invalid, as a flow can use only one PG buffer. Fix this by mapping both SP 'x' and 'x + 8' to the same PG buffer. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 1977e7a..57d48da 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -2718,7 +2718,7 @@ static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port, * Configures the switch priority to buffer table. */ #define MLXSW_REG_PPTB_ID 0x500B -#define MLXSW_REG_PPTB_LEN 0x0C +#define MLXSW_REG_PPTB_LEN 0x10 static const struct mlxsw_reg_info mlxsw_reg_pptb = { .id = MLXSW_REG_PPTB_ID, @@ -2784,6 +2784,13 @@ MLXSW_ITEM32(reg, pptb, pm_msb, 0x08, 24, 8); */ MLXSW_ITEM32(reg, pptb, untagged_buff, 0x08, 0, 4); +/* reg_pptb_prio_to_buff_msb + * Mapping of switch priority to one of the allocated receive port + * buffers. + * Access: RW + */ +MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff_msb, 0x0C, 0x04, 4); + #define MLXSW_REG_PPTB_ALL_PRIO 0xFF static inline void mlxsw_reg_pptb_pack(char *payload, u8 local_port) @@ -2792,6 +2799,14 @@ static inline void mlxsw_reg_pptb_pack(char *payload, u8 local_port) mlxsw_reg_pptb_mm_set(payload, MLXSW_REG_PPTB_MM_UM); mlxsw_reg_pptb_local_port_set(payload, local_port); mlxsw_reg_pptb_pm_set(payload, MLXSW_REG_PPTB_ALL_PRIO); + mlxsw_reg_pptb_pm_msb_set(payload, MLXSW_REG_PPTB_ALL_PRIO); +} + +static inline void mlxsw_reg_pptb_prio_to_buff_pack(char *payload, u8 prio, + u8 buff) +{ + mlxsw_reg_pptb_prio_to_buff_set(payload, prio, buff); + mlxsw_reg_pptb_prio_to_buff_msb_set(payload, prio, buff); } /* PBMC - Port Buffer Management Control Register diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c index a3720a0..074cdda 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c @@ -194,7 +194,7 @@ static int mlxsw_sp_port_pb_prio_init(struct mlxsw_sp_port *mlxsw_sp_port) mlxsw_reg_pptb_pack(pptb_pl, mlxsw_sp_port->local_port); for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) - mlxsw_reg_pptb_prio_to_buff_set(pptb_pl, i, 0); + mlxsw_reg_pptb_prio_to_buff_pack(pptb_pl, i, 0); return mlxsw_reg_write(mlxsw_sp_port->mlxsw_sp->core, MLXSW_REG(pptb), pptb_pl); } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index 4af3f27..01cfb75 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -103,7 +103,8 @@ static int mlxsw_sp_port_pg_prio_map(struct mlxsw_sp_port *mlxsw_sp_port, mlxsw_reg_pptb_pack(pptb_pl, mlxsw_sp_port->local_port); for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) - mlxsw_reg_pptb_prio_to_buff_set(pptb_pl, i, prio_tc[i]); + mlxsw_reg_pptb_prio_to_buff_pack(pptb_pl, i, prio_tc[i]); + return mlxsw_reg_write(mlxsw_sp_port->mlxsw_sp->core, MLXSW_REG(pptb), pptb_pl); } -- cgit v0.10.2 From e86663c475d384ab5f46cb5637e9b7ad08c5c505 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 Jul 2016 15:42:52 -0700 Subject: net: bgmac: Fix infinite loop in bgmac_dma_tx_add() Nothing is decrementing the index "i" while we are cleaning up the fragments we could not successful transmit. Fixes: 9cde94506eacf ("bgmac: implement scatter/gather support") Reported-by: coverity (CID 1352048) Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index a6333d3..25bbae5 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -231,7 +231,7 @@ err_dma: dma_unmap_single(dma_dev, slot->dma_addr, skb_headlen(skb), DMA_TO_DEVICE); - while (i > 0) { + while (i-- > 0) { int index = (ring->end + i) % BGMAC_TX_RING_SLOTS; struct bgmac_slot_info *slot = &ring->slots[index]; u32 ctl1 = le32_to_cpu(ring->cpu_base[index].ctl1); -- cgit v0.10.2 From 18d3df3eab23796d7f852f9c6bb60962b8372ced Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 14 Jul 2016 18:00:10 +0200 Subject: vlan: use a valid default mtu value for vlan over macsec macsec can't cope with mtu frames which need vlan tag insertion, and vlan device set the default mtu equal to the underlying dev's one. By default vlan over macsec devices use invalid mtu, dropping all the large packets. This patch adds a netif helper to check if an upper vlan device needs mtu reduction. The helper is used during vlan devices initialization to set a valid default and during mtu updating to forbid invalid, too bit, mtu values. The helper currently only check if the lower dev is a macsec device, if we get more users, we need to update only the helper (possibly reserving an additional IFF bit). Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f45929c..da4b33b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -4145,6 +4145,13 @@ static inline void netif_keep_dst(struct net_device *dev) dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM); } +/* return true if dev can't cope with mtu frames that need vlan tag insertion */ +static inline bool netif_reduces_vlan_mtu(struct net_device *dev) +{ + /* TODO: reserve and use an additional IFF bit, if we get more users */ + return dev->priv_flags & IFF_MACSEC; +} + extern struct pernet_operations __net_initdata loopback_net_ops; /* Logging, debugging and troubleshooting/diagnostic helpers. */ diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 86ae75b..516b0e7 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -146,10 +146,12 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu) { - /* TODO: gotta make sure the underlying layer can handle it, - * maybe an IFF_VLAN_CAPABLE flag for devices? - */ - if (vlan_dev_priv(dev)->real_dev->mtu < new_mtu) + struct net_device *real_dev = vlan_dev_priv(dev)->real_dev; + unsigned int max_mtu = real_dev->mtu; + + if (netif_reduces_vlan_mtu(real_dev)) + max_mtu -= VLAN_HLEN; + if (max_mtu < new_mtu) return -ERANGE; dev->mtu = new_mtu; diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c index c92b52f..1270207 100644 --- a/net/8021q/vlan_netlink.c +++ b/net/8021q/vlan_netlink.c @@ -118,6 +118,7 @@ static int vlan_newlink(struct net *src_net, struct net_device *dev, { struct vlan_dev_priv *vlan = vlan_dev_priv(dev); struct net_device *real_dev; + unsigned int max_mtu; __be16 proto; int err; @@ -144,9 +145,11 @@ static int vlan_newlink(struct net *src_net, struct net_device *dev, if (err < 0) return err; + max_mtu = netif_reduces_vlan_mtu(real_dev) ? real_dev->mtu - VLAN_HLEN : + real_dev->mtu; if (!tb[IFLA_MTU]) - dev->mtu = real_dev->mtu; - else if (dev->mtu > real_dev->mtu) + dev->mtu = max_mtu; + else if (dev->mtu > max_mtu) return -EINVAL; err = vlan_changelink(dev, tb, data); -- cgit v0.10.2 From de702da7a823ab0c4a1e53ed79a2695f0d453855 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 Jul 2016 16:40:22 -0700 Subject: et131x: Fix logical vs bitwise check in et131x_tx_timeout() We should be using a logical check here instead of a bitwise operation to check if the device is closed already in et131x_tx_timeout(). Reported-by: coverity (CID 146498) Fixes: 38df6492eb511 ("et131x: Add PCIe gigabit ethernet driver et131x to drivers/net") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c index 30defe6..821d86c 100644 --- a/drivers/net/ethernet/agere/et131x.c +++ b/drivers/net/ethernet/agere/et131x.c @@ -3851,7 +3851,7 @@ static void et131x_tx_timeout(struct net_device *netdev) unsigned long flags; /* If the device is closed, ignore the timeout */ - if (~(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)) + if (!(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)) return; /* Any nonrecoverable hardware error? -- cgit v0.10.2 From ea6ff112b095dce2060c304195904d859c3e2625 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 Jul 2016 16:41:16 -0700 Subject: net: nb8800: Fix SKB leak in nb8800_receive() In case nb8800_receive() fails to allocate a fragment, we would leak the SKB freshly allocated and just return, instead, free it. Reported-by: coverity (CID 1341750) Signed-off-by: Florian Fainelli Acked-by: Mans Rullgard Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c index 08a23e6..1a3555d 100644 --- a/drivers/net/ethernet/aurora/nb8800.c +++ b/drivers/net/ethernet/aurora/nb8800.c @@ -259,6 +259,7 @@ static void nb8800_receive(struct net_device *dev, unsigned int i, if (err) { netdev_err(dev, "rx buffer allocation failed\n"); dev->stats.rx_dropped++; + dev_kfree_skb(skb); return; } -- cgit v0.10.2 From 8e6ce7ebeb34f0992f56de078c3744fb383657fa Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 Jul 2016 16:42:16 -0700 Subject: net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata The label lio_xmit_failed is used 3 times through liquidio_xmit() but it always makes a call to dma_unmap_single() using potentially uninitialized variables from "ndata" variable. Out of the 3 gotos, 2 run after ndata has been initialized, and had a prior dma_map_single() call. Fix this by adding a new error label: lio_xmit_dma_failed which does this dma_unmap_single() and then processed with the lio_xmit_failed fallthrough. Fixes: f21fb3ed364bb ("Add support of Cavium Liquidio ethernet adapters") Reported-by: coverity (CID 1309740) Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index 8de79ae..0e7e7da 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -2821,7 +2821,7 @@ static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev) if (!g) { netif_info(lio, tx_err, lio->netdev, "Transmit scatter gather: glist null!\n"); - goto lio_xmit_failed; + goto lio_xmit_dma_failed; } cmdsetup.s.gather = 1; @@ -2892,7 +2892,7 @@ static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev) else status = octnet_send_nic_data_pkt(oct, &ndata, xmit_more); if (status == IQ_SEND_FAILED) - goto lio_xmit_failed; + goto lio_xmit_dma_failed; netif_info(lio, tx_queued, lio->netdev, "Transmit queued successfully\n"); @@ -2906,12 +2906,13 @@ static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_OK; +lio_xmit_dma_failed: + dma_unmap_single(&oct->pci_dev->dev, ndata.cmd.dptr, + ndata.datasize, DMA_TO_DEVICE); lio_xmit_failed: stats->tx_dropped++; netif_info(lio, tx_err, lio->netdev, "IQ%d Transmit dropped:%llu\n", iq_no, stats->tx_dropped); - dma_unmap_single(&oct->pci_dev->dev, ndata.cmd.dptr, - ndata.datasize, DMA_TO_DEVICE); recv_buffer_free(skb); return NETDEV_TX_OK; } -- cgit v0.10.2 From a46e667887448da10e26e46442bda01d1f311aaf Mon Sep 17 00:00:00 2001 From: Lans Zhang Date: Mon, 18 Jul 2016 00:10:39 +0100 Subject: PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined This fix resolves the following kernel panic if an empty or missing AuthorityKeyIdentifier is encountered and DEBUG is defined in pkcs7_verify.c. [ 459.041989] PKEY: <==public_key_verify_signature() = 0 [ 459.041993] PKCS7: Verified signature 1 [ 459.041995] PKCS7: ==> pkcs7_verify_sig_chain() [ 459.041999] PKCS7: verify Sample DB Certificate for SCP: 01 [ 459.042002] PKCS7: - issuer Sample KEK Certificate for SCP [ 459.042014] BUG: unable to handle kernel NULL pointer dereference at (null) [ 459.042135] IP: [] pkcs7_verify+0x72c/0x7f0 [ 459.042217] PGD 739e6067 PUD 77719067 PMD 0 [ 459.042286] Oops: 0000 [#1] PREEMPT SMP [ 459.042328] Modules linked in: [ 459.042368] CPU: 0 PID: 474 Comm: kexec Not tainted 4.7.0-rc7-WR8.0.0.0_standard+ #18 [ 459.042462] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 10/09/2014 [ 459.042586] task: ffff880073a50000 ti: ffff8800738e8000 task.ti: ffff8800738e8000 [ 459.042675] RIP: 0010:[] [] pkcs7_verify+0x72c/0x7f0 [ 459.042784] RSP: 0018:ffff8800738ebd58 EFLAGS: 00010246 [ 459.042845] RAX: 0000000000000000 RBX: ffff880076b7da80 RCX: 0000000000000006 [ 459.042929] RDX: 0000000000000001 RSI: ffffffff81c85001 RDI: ffffffff81ca00a9 [ 459.043014] RBP: ffff8800738ebd98 R08: 0000000000000400 R09: ffff8800788a304c [ 459.043098] R10: 0000000000000000 R11: 00000000000060ca R12: ffff8800769a2bc0 [ 459.043182] R13: ffff880077358300 R14: 0000000000000000 R15: ffff8800769a2dc0 [ 459.043268] FS: 00007f24cc741700(0000) GS:ffff880074e00000(0000) knlGS:0000000000000000 [ 459.043365] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 459.043431] CR2: 0000000000000000 CR3: 0000000073a36000 CR4: 00000000001006f0 [ 459.043514] Stack: [ 459.043530] 0000000000000000 ffffffbf00000020 31ffffff813e68b0 0000000000000002 [ 459.043644] ffff8800769a2bc0 0000000000000000 00000000007197b8 0000000000000002 [ 459.043756] ffff8800738ebdd8 ffffffff81153fb1 0000000000000000 0000000000000000 [ 459.043869] Call Trace: [ 459.043898] [] verify_pkcs7_signature+0x61/0x140 [ 459.043974] [] verify_pefile_signature+0x2cb/0x830 [ 459.044052] [] ? verify_pefile_signature+0x830/0x830 [ 459.044134] [] bzImage64_verify_sig+0x15/0x20 [ 459.046332] [] arch_kexec_kernel_verify_sig+0x29/0x40 [ 459.048552] [] SyS_kexec_file_load+0x1f4/0x6c0 [ 459.050768] [] ? __do_page_fault+0x1b6/0x550 [ 459.052996] [] entry_SYSCALL_64_fastpath+0x17/0x93 [ 459.055242] Code: e8 0a d6 ff ff 85 c0 0f 88 7a fb ff ff 4d 39 fd 4d 89 7d 08 74 45 4d 89 fd e9 14 fe ff ff 4d 8b 76 08 31 c0 48 c7 c7 a9 00 ca 81 <41> 0f b7 36 49 8d 56 02 e8 d0 91 d6 ff 4d 8b 3c 24 4d 85 ff 0f [ 459.060535] RIP [] pkcs7_verify+0x72c/0x7f0 [ 459.063040] RSP [ 459.065456] CR2: 0000000000000000 [ 459.075998] ---[ end trace c15f0e897cda28dc ]--- Signed-off-by: Lans Zhang Signed-off-by: David Howells Cc: Dave Young Cc: Baoquan He Cc: Vivek Goyal cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Signed-off-by: James Morris diff --git a/crypto/asymmetric_keys/pkcs7_verify.c b/crypto/asymmetric_keys/pkcs7_verify.c index 44b746e..2ffd697 100644 --- a/crypto/asymmetric_keys/pkcs7_verify.c +++ b/crypto/asymmetric_keys/pkcs7_verify.c @@ -227,7 +227,7 @@ static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7, if (asymmetric_key_id_same(p->id, auth)) goto found_issuer_check_skid; } - } else { + } else if (sig->auth_ids[1]) { auth = sig->auth_ids[1]; pr_debug("- want %*phN\n", auth->len, auth->data); for (p = pkcs7->certs; p; p = p->next) { -- cgit v0.10.2 From d128471a14775cd11abd81c09b2a086997ab3150 Mon Sep 17 00:00:00 2001 From: Lans Zhang Date: Mon, 18 Jul 2016 00:10:47 +0100 Subject: pefile: Fix the failure of calculation for digest Commit e68503bd68 forgot to set digest_len and thus cause the following error reported by kexec when launching a crash kernel: kexec_file_load failed: Bad message Fixes: e68503bd68 (KEYS: Generalise system_verify_data() to provide access to internal content) Signed-off-by: Lans Zhang Tested-by: Dave Young Signed-off-by: David Howells Cc: Baoquan He Cc: Vivek Goyal cc: kexec@lists.infradead.org cc: linux-crypto@vger.kernel.org Signed-off-by: James Morris diff --git a/crypto/asymmetric_keys/mscode_parser.c b/crypto/asymmetric_keys/mscode_parser.c index 6a76d5c..9492e1c 100644 --- a/crypto/asymmetric_keys/mscode_parser.c +++ b/crypto/asymmetric_keys/mscode_parser.c @@ -124,5 +124,10 @@ int mscode_note_digest(void *context, size_t hdrlen, struct pefile_context *ctx = context; ctx->digest = kmemdup(value, vlen, GFP_KERNEL); - return ctx->digest ? 0 : -ENOMEM; + if (!ctx->digest) + return -ENOMEM; + + ctx->digest_len = vlen; + + return 0; } -- cgit v0.10.2 From acddc72015e5bc8f640b02d38b36afd7841c9c14 Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Mon, 18 Jul 2016 00:10:55 +0100 Subject: KEYS: Fix for erroneous trust of incorrectly signed X.509 certs Arbitrary X.509 certificates without authority key identifiers (AKIs) can be added to "trusted" keyrings, including IMA or EVM certs loaded from the filesystem. Signature verification is currently bypassed for certs without AKIs. Trusted keys were recently refactored, and this bug is not present in 4.6. restrict_link_by_signature should return -ENOKEY (no matching parent certificate found) if the certificate being evaluated has no AKIs, instead of bypassing signature checks and returning 0 (new certificate accepted). Reported-by: Petko Manolov Signed-off-by: Mat Martineau Signed-off-by: David Howells Signed-off-by: James Morris diff --git a/crypto/asymmetric_keys/restrict.c b/crypto/asymmetric_keys/restrict.c index ac4bddf..19d1afb9 100644 --- a/crypto/asymmetric_keys/restrict.c +++ b/crypto/asymmetric_keys/restrict.c @@ -87,7 +87,7 @@ int restrict_link_by_signature(struct key *trust_keyring, sig = payload->data[asym_auth]; if (!sig->auth_ids[0] && !sig->auth_ids[1]) - return 0; + return -ENOKEY; if (ca_keyid && !asymmetric_key_id_partial(sig->auth_ids[1], ca_keyid)) return -EPERM; -- cgit v0.10.2 From bfe5b1b1e013f7b1c0fd2ac3b3c8c380114b3fb9 Mon Sep 17 00:00:00 2001 From: Ville Viinikka Date: Fri, 8 Jul 2016 18:27:02 +0300 Subject: mmc: block: fix free of uninitialized 'idata->buf' Set 'idata->buf' to NULL so that it never gets returned without initialization. This fixes a bug where mmc_blk_ioctl_cmd() would free both 'idata' and 'idata->buf' but 'idata->buf' was returned uninitialized. Fixes: 1ff8950c0433 ("mmc: block: change to use kmalloc when copy data from userspace") Signed-off-by: Ville Viinikka Cc: Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e62fde3..c13ba2a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -355,8 +355,10 @@ static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( goto idata_err; } - if (!idata->buf_bytes) + if (!idata->buf_bytes) { + idata->buf = NULL; return idata; + } idata->buf = kmalloc(idata->buf_bytes, GFP_KERNEL); if (!idata->buf) { -- cgit v0.10.2 From f68381a70bb2b26c31b13fdaf67c778f92fd32b4 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Wed, 13 Jul 2016 22:05:38 +0000 Subject: mmc: block: fix packed command header endianness The code that fills packed command header assumes that CPU runs in little-endian mode. Hence the header is malformed in big-endian mode and causes MMC data transfer errors: [ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40 [ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1 Convert header data to LE. Signed-off-by: Taras Kondratiuk Fixes: ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices") Cc: Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index c13ba2a..c5472e3 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1788,8 +1788,8 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, packed_cmd_hdr = packed->cmd_hdr; memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr)); - packed_cmd_hdr[0] = (packed->nr_entries << 16) | - (PACKED_CMD_WR << 8) | PACKED_CMD_VER; + packed_cmd_hdr[0] = cpu_to_le32((packed->nr_entries << 16) | + (PACKED_CMD_WR << 8) | PACKED_CMD_VER); hdr_blocks = mmc_large_sector(card) ? 8 : 1; /* @@ -1803,14 +1803,14 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, ((brq->data.blocks * brq->data.blksz) >= card->ext_csd.data_tag_unit_size); /* Argument of CMD23 */ - packed_cmd_hdr[(i * 2)] = + packed_cmd_hdr[(i * 2)] = cpu_to_le32( (do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) | (do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) | - blk_rq_sectors(prq); + blk_rq_sectors(prq)); /* Argument of CMD18 or CMD25 */ - packed_cmd_hdr[((i * 2)) + 1] = + packed_cmd_hdr[((i * 2)) + 1] = cpu_to_le32( mmc_card_blockaddr(card) ? - blk_rq_pos(prq) : blk_rq_pos(prq) << 9; + blk_rq_pos(prq) : blk_rq_pos(prq) << 9); packed->blocks += blk_rq_sectors(prq); i++; } -- cgit v0.10.2 From b3802db5eb72d2a96f4aa4ff0abb937033df2acf Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 14 Jul 2016 17:05:50 +0200 Subject: mmc: pxamci: fix potential oops As reported by Dan in his report in [1], there is a potential NULL pointer derefence if these conditions are met : - there is no platform_data provided, ie. host->pdata = NULL Fix this by only using the platform data ro_invert when a gpio for read-only is provided by the platform data. This doesn't appear yet as every pxa board provides a platform_data, and calls pxa_set_mci_info() with a non NULL pointer. [1] [bug report] mmc: pxamci: fix card detect with slot-gpio API. The commit fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API") from Sep 26, 2015, leads to the following static checker warning: drivers/mmc/host/pxamci.c:809 pxamci_probe() warn: variable dereferenced before check 'host->pdata' (see line 798) Fixes: fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API") Reported-by: Dan Carpenter Signed-off-by: Robert Jarzmik Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 86fac3e..c763b40 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -789,14 +789,16 @@ static int pxamci_probe(struct platform_device *pdev) gpio_direction_output(gpio_power, host->pdata->gpio_power_invert); } - if (gpio_is_valid(gpio_ro)) + if (gpio_is_valid(gpio_ro)) { ret = mmc_gpio_request_ro(mmc, gpio_ro); - if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro); - goto out; - } else { - mmc->caps2 |= host->pdata->gpio_card_ro_invert ? - 0 : MMC_CAP2_RO_ACTIVE_HIGH; + if (ret) { + dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", + gpio_ro); + goto out; + } else { + mmc->caps2 |= host->pdata->gpio_card_ro_invert ? + 0 : MMC_CAP2_RO_ACTIVE_HIGH; + } } if (gpio_is_valid(gpio_cd)) -- cgit v0.10.2 From 76df52969711ae3725a98f26fbbc6a349803dcbf Mon Sep 17 00:00:00 2001 From: Kazuki Oikawa Date: Mon, 18 Jul 2016 01:16:15 +0900 Subject: ALSA: usb-audio: Fix quirks code is not called snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need calling a quirks code. But existed code path that not calling dev_set_drvdata in usb_audio_probe. Fixes: 79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation") Signed-off-by: Kazuki Oikawa Cc: # v4.6+ Reviewed-by: Takashi Sakamoto Tested-by: Takashi Sakamoto Signed-off-by: Takashi Iwai diff --git a/sound/usb/card.c b/sound/usb/card.c index 69860da..9e5276d 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -556,7 +556,6 @@ static int usb_audio_probe(struct usb_interface *intf, goto __error; } chip = usb_chip[i]; - dev_set_drvdata(&dev->dev, chip); atomic_inc(&chip->active); /* avoid autopm */ break; } @@ -582,6 +581,7 @@ static int usb_audio_probe(struct usb_interface *intf, goto __error; } } + dev_set_drvdata(&dev->dev, chip); /* * For devices with more than one control interface, we assume the -- cgit v0.10.2 From c71d4d58981bed3366769ef5cf1f20e588fe16d0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 18 Jul 2016 13:15:14 +0300 Subject: drm/i915: Treat eDP as always connected, again MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit eDP should be treated as connected even if doesn't have an EDID. In that case we'll use the timings from the VBT. That used to be the case until commit f21a21983ef1 ("drm/i915: Splitting intel_dp_detect") broke things by considering even eDP disconnected if we fail to get an EDID for it. Fix things up again by treating eDP as always connected. Cc: Shubhangi Shrivastava Cc: Nathan D Ciobanu Cc: Sivakumar Thulasimani Cc: Ander Conselvan de Oliveira Cc: Larry Finger Reported-by: Larry Finger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96675 Cc: drm-intel-fixes@lists.freedesktop.org Fixes: f21a21983ef1 ("drm/i915: Splitting intel_dp_detect") Signed-off-by: Ville Syrjälä Tested-by: Larry Finger Link: http://patchwork.freedesktop.org/patch/msgid/1468836914-16537-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 1b7f2c8b0773d5ccbef43ef38a13ad33136c9679) Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 40745e38d..891107f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4645,7 +4645,7 @@ intel_dp_detect(struct drm_connector *connector, bool force) intel_dp->detect_done = false; - if (intel_connector->detect_edid) + if (is_edp(intel_dp) || intel_connector->detect_edid) return connector_status_connected; else return connector_status_disconnected; -- cgit v0.10.2 From ed2eebbd61af8d378ca39ad7aef7017f29eed6f3 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Wed, 25 May 2016 14:30:41 +0100 Subject: drm/i915: add missing condition for committing planes on crtc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i915 driver checks for color management properties changes as part of a plane update. Therefore a color management update must imply a plane update, otherwise we never update the transformation matrixes and degamma/gamma LUTs. v2: add comment about moving the commit of color management registers to an async worker v3: Commit color management register right after vblank v4: Move back color management commit condition together with planes commit v5: Trigger color management commit through the planes commit (Daniel) v6: Make plane change update more readable Fixes: 20a34e78f0d7 (drm/i915: Update color management during vblank evasion.) Cc: Maarten Lankhorst Cc: Ville Syrjälä Cc: Daniel Vetter Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Lionel Landwerlin References: https://lkml.org/lkml/2016/7/14/614 Reviewed-and-tested-by: Mario Kleiner Link: http://patchwork.freedesktop.org/patch/msgid/1464183041-8478-1-git-send-email-lionel.g.landwerlin@intel.com (cherry picked from commit e7852a4b3a4fb6f6c18fdaff934580aa8521599a) Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 04452cf..3074c56 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11997,6 +11997,12 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc, ret = intel_color_check(crtc, crtc_state); if (ret) return ret; + + /* + * Changing color management on Intel hardware is + * handled as part of planes update. + */ + crtc_state->planes_changed = true; } ret = 0; -- cgit v0.10.2 From a4a027a860ff58df8df0796d730397a3b30dbc9a Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Tue, 26 Apr 2016 14:59:51 -0700 Subject: drm/i915/kbl: Introduce the first official DMC for Kabylake. Version 1.01. This firmware is made for Kabylake platform so it doesn't need the stepping workaround that we had before. v2: Rebased on top of latest nightly with min version required change. v3: With right CSR_VERSION (Patrik). Cc: Christophe Prigent Cc: Patrik Jakobsson Reviewed-by: Ben Widawsky (v1) Signed-off-by: Rodrigo Vivi Reviewed-by: Patrik Jakobsson Link: http://patchwork.freedesktop.org/patch/msgid/1461707991-15336-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 4922d4919596219864686be1e70dcd92c685ec9f) Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c index a34c23e..2b3b428 100644 --- a/drivers/gpu/drm/i915/intel_csr.c +++ b/drivers/gpu/drm/i915/intel_csr.c @@ -41,16 +41,22 @@ * be moved to FW_FAILED. */ +#define I915_CSR_KBL "i915/kbl_dmc_ver1.bin" +MODULE_FIRMWARE(I915_CSR_KBL); +#define KBL_CSR_VERSION_REQUIRED CSR_VERSION(1, 1) + #define I915_CSR_SKL "i915/skl_dmc_ver1.bin" +MODULE_FIRMWARE(I915_CSR_SKL); +#define SKL_CSR_VERSION_REQUIRED CSR_VERSION(1, 23) + #define I915_CSR_BXT "i915/bxt_dmc_ver1.bin" +MODULE_FIRMWARE(I915_CSR_BXT); +#define BXT_CSR_VERSION_REQUIRED CSR_VERSION(1, 7) #define FIRMWARE_URL "https://01.org/linuxgraphics/intel-linux-graphics-firmwares" -MODULE_FIRMWARE(I915_CSR_SKL); -MODULE_FIRMWARE(I915_CSR_BXT); -#define SKL_CSR_VERSION_REQUIRED CSR_VERSION(1, 23) -#define BXT_CSR_VERSION_REQUIRED CSR_VERSION(1, 7) + #define CSR_MAX_FW_SIZE 0x2FFF #define CSR_DEFAULT_FW_OFFSET 0xFFFFFFFF @@ -169,12 +175,10 @@ struct stepping_info { char substepping; }; -/* - * Kabylake derivated from Skylake H0, so SKL H0 - * is the right firmware for KBL A0 (revid 0). - */ static const struct stepping_info kbl_stepping_info[] = { - {'H', '0'}, {'I', '0'} + {'A', '0'}, {'B', '0'}, {'C', '0'}, + {'D', '0'}, {'E', '0'}, {'F', '0'}, + {'G', '0'}, {'H', '0'}, {'I', '0'}, }; static const struct stepping_info skl_stepping_info[] = { @@ -298,7 +302,9 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv, csr->version = css_header->version; - if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { + if (IS_KABYLAKE(dev_priv)) { + required_min_version = KBL_CSR_VERSION_REQUIRED; + } else if (IS_SKYLAKE(dev_priv)) { required_min_version = SKL_CSR_VERSION_REQUIRED; } else if (IS_BROXTON(dev_priv)) { required_min_version = BXT_CSR_VERSION_REQUIRED; @@ -446,7 +452,9 @@ void intel_csr_ucode_init(struct drm_i915_private *dev_priv) if (!HAS_CSR(dev_priv)) return; - if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) + if (IS_KABYLAKE(dev_priv)) + csr->fw_path = I915_CSR_KBL; + else if (IS_SKYLAKE(dev_priv)) csr->fw_path = I915_CSR_SKL; else if (IS_BROXTON(dev_priv)) csr->fw_path = I915_CSR_BXT; -- cgit v0.10.2 From 1488a1e3828d60d74c9b802a05e24c0487babe4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 18 Jul 2016 18:40:00 -0400 Subject: libata: LITE-ON CX1-JB256-HP needs lower max_sectors Since 34b48db66e08 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by: Tejun Heo Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Cc: stable@vger.kernel.org # v3.19+ Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap") Signed-off-by: Tejun Heo diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6be7770..31c183a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4314,6 +4314,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { */ { "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 }, + /* + * Device times out with higher max sects. + * https://bugzilla.kernel.org/show_bug.cgi?id=121671 + */ + { "LITEON CX1-JB256-HP", NULL, ATA_HORKAGE_MAX_SEC_1024 }, + /* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */ -- cgit v0.10.2 From f96423f483b1a7854270335b319e8d1cdd6f3585 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 18 Jul 2016 09:49:12 +0200 Subject: clk: at91: fix clk_programmable_set_parent() Since commit 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally"), clk_programmable_set_parent() is always selecting the first parent (AKA slow_clk), no matter what's passed in the 'index' parameter. Fix that by initializing the pckr variable to the index value. Signed-off-by: Boris Brezillon Reported-by: Hans Verkuil Fixes: 1bdf02326b71e ("clk: at91: make use of syscon/regmap internally") Cc: Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1468828152-18389-1-git-send-email-boris.brezillon@free-electrons.com diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c index 10f846c..25d5906 100644 --- a/drivers/clk/at91/clk-programmable.c +++ b/drivers/clk/at91/clk-programmable.c @@ -99,7 +99,7 @@ static int clk_programmable_set_parent(struct clk_hw *hw, u8 index) struct clk_programmable *prog = to_clk_programmable(hw); const struct clk_programmable_layout *layout = prog->layout; unsigned int mask = layout->css_mask; - unsigned int pckr = 0; + unsigned int pckr = index; if (layout->have_slck_mck) mask |= AT91_PMC_CSSMCK_MCK; -- cgit v0.10.2 From 0564bf0afae443deeb16f36e2c39fefff89d05f2 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Sat, 16 Jul 2016 17:08:56 +0300 Subject: net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int In kernel HTB keeps tokens in signed 64-bit in nanoseconds. In netlink protocol these values are converted into pshed ticks (64ns for now) and truncated to 32-bit. In struct tc_htb_xstats fields "tokens" and "ctokens" are declared as unsigned 32-bit but they could be negative thus tool 'tc' prints them as signed. Big values loose higher bits and/or become negative. This patch clamps tokens in xstat into range from INT_MIN to INT_MAX. In this way it's easier to understand what's going on here. Signed-off-by: Konstantin Khlebnikov Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 62f9d81..052f84d 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1140,8 +1140,10 @@ htb_dump_class_stats(struct Qdisc *sch, unsigned long arg, struct gnet_dump *d) if (!cl->level && cl->un.leaf.q) qlen = cl->un.leaf.q->q.qlen; - cl->xstats.tokens = PSCHED_NS2TICKS(cl->tokens); - cl->xstats.ctokens = PSCHED_NS2TICKS(cl->ctokens); + cl->xstats.tokens = clamp_t(s64, PSCHED_NS2TICKS(cl->tokens), + INT_MIN, INT_MAX); + cl->xstats.ctokens = clamp_t(s64, PSCHED_NS2TICKS(cl->ctokens), + INT_MIN, INT_MAX); if (gnet_stats_copy_basic(d, NULL, &cl->bstats) < 0 || gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 || -- cgit v0.10.2 From c74bfbdba0e8d056e4ba579a666b5cdb8ec3cd35 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Sat, 16 Jul 2016 17:33:15 -0400 Subject: sctp: load transport header after sk_filter Do not cache pointers into the skb linear segment across sk_filter. The function call can trigger pskb_expand_head. Signed-off-by: Willem de Bruijn Acked-by: Daniel Borkmann Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller diff --git a/net/sctp/input.c b/net/sctp/input.c index a701527..47cf460 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -112,7 +112,6 @@ int sctp_rcv(struct sk_buff *skb) struct sctp_ep_common *rcvr; struct sctp_transport *transport = NULL; struct sctp_chunk *chunk; - struct sctphdr *sh; union sctp_addr src; union sctp_addr dest; int family; @@ -127,8 +126,6 @@ int sctp_rcv(struct sk_buff *skb) if (skb_linearize(skb)) goto discard_it; - sh = sctp_hdr(skb); - /* Pull up the IP and SCTP headers. */ __skb_pull(skb, skb_transport_offset(skb)); if (skb->len < sizeof(struct sctphdr)) @@ -230,7 +227,7 @@ int sctp_rcv(struct sk_buff *skb) chunk->rcvr = rcvr; /* Remember the SCTP header. */ - chunk->sctp_hdr = sh; + chunk->sctp_hdr = sctp_hdr(skb); /* Set the source and destination addresses of the incoming chunk. */ sctp_init_addrs(chunk, &src, &dest); -- cgit v0.10.2 From 6bd80f372371a7b3f5ff13e4e8a560066299c001 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Jun 2016 09:43:00 +0200 Subject: m68k/defconfig: Update defconfigs for v4.7-rc2 Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 3ee6976..8f5b6f7 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -359,6 +360,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -553,7 +555,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index e96787f..31bded9 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -341,6 +342,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -512,7 +514,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 083fe6b..0d7739e 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -350,6 +351,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -533,7 +535,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 475130c..2cbb5c4 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -340,6 +341,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 4339658..96102a4 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -341,6 +342,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -514,7 +516,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 831cc8c..97d88f7 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -357,6 +358,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -536,7 +538,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 6377afe..be25ef2 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -390,6 +391,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -616,7 +618,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 4304b3d..a008344 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -339,6 +340,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 074bda4..6735a25 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -340,6 +341,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -504,7 +506,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 07b9fa8..780c6e9 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -346,6 +347,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -527,7 +529,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 36e6fae..44693cf 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -337,6 +338,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -506,7 +508,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 903acf9..ef0071d 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -9,6 +9,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_USERFAULTFD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -337,6 +338,7 @@ CONFIG_MACVTAP=m CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -506,7 +508,9 @@ CONFIG_TEST_STRING_HELPERS=m CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m +CONFIG_TEST_UUID=m CONFIG_TEST_RHASHTABLE=m +CONFIG_TEST_HASH=m CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m -- cgit v0.10.2 From a72255983f12f31f0c8d8275fb1a781546cfacb7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Jul 2016 12:32:39 -0700 Subject: nfit: make DIMM DSMs optional Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions implemented" attempted to fix a QEMU regression by supporting its usage of a zero-mask as a valid response to a DSM-family probe request. However, this behavior breaks HP platforms that return a zero-mask by default causing the probe to misidentify the DSM-family. Instead, the QEMU regression can be fixed by simply not requiring the DSM family to be identified. This effectively reverts commit 4995734e973a, and removes the DSM requirement from the init path. Cc: "Rafael J. Wysocki" Cc: Xiao Guangrong Cc: Linda Knippers Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented") Reported-by: Jerry Hoemann Tested-by: Jerry Hoemann Signed-off-by: Dan Williams diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index ac6ddcc0..1f0e060 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -1131,11 +1131,11 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, /* * Until standardization materializes we need to consider up to 3 - * different command sets. Note, that checking for zero functions - * tells us if any commands might be reachable through this uuid. + * different command sets. Note, that checking for function0 (bit0) + * tells us if any commands are reachable through this uuid. */ for (i = NVDIMM_FAMILY_INTEL; i <= NVDIMM_FAMILY_HPE2; i++) - if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 0)) + if (acpi_check_dsm(adev_dimm->handle, to_nfit_uuid(i), 1, 1)) break; /* limit the supported commands to those that are publicly documented */ @@ -1151,9 +1151,10 @@ static int acpi_nfit_add_dimm(struct acpi_nfit_desc *acpi_desc, if (disable_vendor_specific) dsm_mask &= ~(1 << 8); } else { - dev_err(dev, "unknown dimm command family\n"); + dev_dbg(dev, "unknown dimm command family\n"); nfit_mem->family = -1; - return force_enable_dimms ? 0 : -ENODEV; + /* DSMs are optional, continue loading the driver... */ + return 0; } uuid = to_nfit_uuid(nfit_mem->family); diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index b4de130..22c0995 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -680,6 +680,9 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) u64 mask = 0; union acpi_object *obj; + if (funcs == 0) + return false; + obj = acpi_evaluate_dsm(handle, uuid, rev, 0, NULL); if (!obj) return false; @@ -692,9 +695,6 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, u64 rev, u64 funcs) mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); ACPI_FREE(obj); - if (funcs == 0) - return true; - /* * Bit 0 indicates whether there's support for any functions other than * function 0 for the specified UUID and revision. -- cgit v0.10.2 From 30f56e3ced0f4966e8a84ece1acceccbbb73d365 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Mon, 18 Jul 2016 18:35:11 +0300 Subject: net/mlx4_en: Move filters cleanup to a proper location Filters cleanup should be done once before destroying net device, since filters list is contained in the private data. Fixes: 1eb8c695bda9 ('net/mlx4_en: Add accelerated RFS support') Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 0c0dfd6..5d809c8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2080,6 +2080,10 @@ void mlx4_en_destroy_netdev(struct net_device *dev) mdev->upper[priv->port] = NULL; mutex_unlock(&mdev->state_lock); +#ifdef CONFIG_RFS_ACCEL + mlx4_en_cleanup_filters(priv); +#endif + mlx4_en_free_resources(priv); kfree(priv->tx_ring); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index c1b3a9c..99b5407 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -514,9 +514,6 @@ void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, ring->rx_info = NULL; kfree(ring); *pring = NULL; -#ifdef CONFIG_RFS_ACCEL - mlx4_en_cleanup_filters(priv); -#endif } void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, -- cgit v0.10.2 From ec25bc04ed8e12947738468cbe2191f1529f9e39 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Mon, 18 Jul 2016 18:35:12 +0300 Subject: net/mlx4_en: Add resilience in low memory systems This patch fixes the lost of Ethernet port on low memory system, when driver frees its resources and fails to allocate new resources. Issue could happen while changing number of channels, rings size or changing the timestamp configuration. This fix is necessary because of removing vmap use in the code. When vmap was in use driver could allocate non-contiguous memory and make it contiguous with vmap. Now it could fail to allocate a large chunk of contiguous memory and lose the port. Current code tries to allocate new resources and then upon success frees the old resources. Fixes: 73898db04301 ('net/mlx4: Avoid wrong virtual mappings') Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index fc95aff..44cf16d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1042,6 +1042,8 @@ static int mlx4_en_set_ringparam(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_port_profile new_prof; + struct mlx4_en_priv *tmp; u32 rx_size, tx_size; int port_up = 0; int err = 0; @@ -1061,22 +1063,25 @@ static int mlx4_en_set_ringparam(struct net_device *dev, tx_size == priv->tx_ring[0]->size) return 0; + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + mutex_lock(&mdev->state_lock); + memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile)); + new_prof.tx_ring_size = tx_size; + new_prof.rx_ring_size = rx_size; + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + if (err) + goto out; + if (priv->port_up) { port_up = 1; mlx4_en_stop_port(dev, 1); } - mlx4_en_free_resources(priv); - - priv->prof->tx_ring_size = tx_size; - priv->prof->rx_ring_size = rx_size; + mlx4_en_safe_replace_resources(priv, tmp); - err = mlx4_en_alloc_resources(priv); - if (err) { - en_err(priv, "Failed reallocating port resources\n"); - goto out; - } if (port_up) { err = mlx4_en_start_port(dev); if (err) @@ -1084,8 +1089,8 @@ static int mlx4_en_set_ringparam(struct net_device *dev, } err = mlx4_en_moderation_update(priv); - out: + kfree(tmp); mutex_unlock(&mdev->state_lock); return err; } @@ -1714,6 +1719,8 @@ static int mlx4_en_set_channels(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_port_profile new_prof; + struct mlx4_en_priv *tmp; int port_up = 0; int err = 0; @@ -1723,23 +1730,26 @@ static int mlx4_en_set_channels(struct net_device *dev, !channel->tx_count || !channel->rx_count) return -EINVAL; + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + mutex_lock(&mdev->state_lock); + memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile)); + new_prof.num_tx_rings_p_up = channel->tx_count; + new_prof.tx_ring_num = channel->tx_count * MLX4_EN_NUM_UP; + new_prof.rx_ring_num = channel->rx_count; + + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + if (err) + goto out; + if (priv->port_up) { port_up = 1; mlx4_en_stop_port(dev, 1); } - mlx4_en_free_resources(priv); - - priv->num_tx_rings_p_up = channel->tx_count; - priv->tx_ring_num = channel->tx_count * MLX4_EN_NUM_UP; - priv->rx_ring_num = channel->rx_count; - - err = mlx4_en_alloc_resources(priv); - if (err) { - en_err(priv, "Failed reallocating port resources\n"); - goto out; - } + mlx4_en_safe_replace_resources(priv, tmp); netif_set_real_num_tx_queues(dev, priv->tx_ring_num); netif_set_real_num_rx_queues(dev, priv->rx_ring_num); @@ -1757,8 +1767,8 @@ static int mlx4_en_set_channels(struct net_device *dev, } err = mlx4_en_moderation_update(priv); - out: + kfree(tmp); mutex_unlock(&mdev->state_lock); return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 5d809c8..8359e9e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1954,7 +1954,7 @@ static int mlx4_en_close(struct net_device *dev) return 0; } -void mlx4_en_free_resources(struct mlx4_en_priv *priv) +static void mlx4_en_free_resources(struct mlx4_en_priv *priv) { int i; @@ -1979,7 +1979,7 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv) } -int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) +static int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) { struct mlx4_en_port_profile *prof = priv->prof; int i; @@ -2044,6 +2044,77 @@ static void mlx4_en_shutdown(struct net_device *dev) rtnl_unlock(); } +static int mlx4_en_copy_priv(struct mlx4_en_priv *dst, + struct mlx4_en_priv *src, + struct mlx4_en_port_profile *prof) +{ + memcpy(&dst->hwtstamp_config, &prof->hwtstamp_config, + sizeof(dst->hwtstamp_config)); + dst->num_tx_rings_p_up = src->mdev->profile.num_tx_rings_p_up; + dst->tx_ring_num = prof->tx_ring_num; + dst->rx_ring_num = prof->rx_ring_num; + dst->flags = prof->flags; + dst->mdev = src->mdev; + dst->port = src->port; + dst->dev = src->dev; + dst->prof = prof; + dst->stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * MLX4_EN_MAX_RX_FRAGS); + + dst->tx_ring = kzalloc(sizeof(struct mlx4_en_tx_ring *) * MAX_TX_RINGS, + GFP_KERNEL); + if (!dst->tx_ring) + return -ENOMEM; + + dst->tx_cq = kzalloc(sizeof(struct mlx4_en_cq *) * MAX_TX_RINGS, + GFP_KERNEL); + if (!dst->tx_cq) { + kfree(dst->tx_ring); + return -ENOMEM; + } + return 0; +} + +static void mlx4_en_update_priv(struct mlx4_en_priv *dst, + struct mlx4_en_priv *src) +{ + memcpy(dst->rx_ring, src->rx_ring, + sizeof(struct mlx4_en_rx_ring *) * src->rx_ring_num); + memcpy(dst->rx_cq, src->rx_cq, + sizeof(struct mlx4_en_cq *) * src->rx_ring_num); + memcpy(&dst->hwtstamp_config, &src->hwtstamp_config, + sizeof(dst->hwtstamp_config)); + dst->tx_ring_num = src->tx_ring_num; + dst->rx_ring_num = src->rx_ring_num; + dst->tx_ring = src->tx_ring; + dst->tx_cq = src->tx_cq; + memcpy(dst->prof, src->prof, sizeof(struct mlx4_en_port_profile)); +} + +int mlx4_en_try_alloc_resources(struct mlx4_en_priv *priv, + struct mlx4_en_priv *tmp, + struct mlx4_en_port_profile *prof) +{ + mlx4_en_copy_priv(tmp, priv, prof); + + if (mlx4_en_alloc_resources(tmp)) { + en_warn(priv, + "%s: Resource allocation failed, using previous configuration\n", + __func__); + kfree(tmp->tx_ring); + kfree(tmp->tx_cq); + return -ENOMEM; + } + return 0; +} + +void mlx4_en_safe_replace_resources(struct mlx4_en_priv *priv, + struct mlx4_en_priv *tmp) +{ + mlx4_en_free_resources(priv); + mlx4_en_update_priv(priv, tmp); +} + void mlx4_en_destroy_netdev(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); @@ -3128,6 +3199,8 @@ int mlx4_en_reset_config(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_port_profile new_prof; + struct mlx4_en_priv *tmp; int port_up = 0; int err = 0; @@ -3144,19 +3217,29 @@ int mlx4_en_reset_config(struct net_device *dev, return -EINVAL; } + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + mutex_lock(&mdev->state_lock); + + memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile)); + memcpy(&new_prof.hwtstamp_config, &ts_config, sizeof(ts_config)); + + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + if (err) + goto out; + if (priv->port_up) { port_up = 1; mlx4_en_stop_port(dev, 1); } - mlx4_en_free_resources(priv); - en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n", - ts_config.rx_filter, !!(features & NETIF_F_HW_VLAN_CTAG_RX)); + ts_config.rx_filter, + !!(features & NETIF_F_HW_VLAN_CTAG_RX)); - priv->hwtstamp_config.tx_type = ts_config.tx_type; - priv->hwtstamp_config.rx_filter = ts_config.rx_filter; + mlx4_en_safe_replace_resources(priv, tmp); if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) { if (features & NETIF_F_HW_VLAN_CTAG_RX) @@ -3190,11 +3273,6 @@ int mlx4_en_reset_config(struct net_device *dev, dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX; } - err = mlx4_en_alloc_resources(priv); - if (err) { - en_err(priv, "Failed reallocating port resources\n"); - goto out; - } if (port_up) { err = mlx4_en_start_port(dev); if (err) @@ -3203,6 +3281,8 @@ int mlx4_en_reset_config(struct net_device *dev, out: mutex_unlock(&mdev->state_lock); - netdev_features_change(dev); + kfree(tmp); + if (!err) + netdev_features_change(dev); return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 467d47e..13d297e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -353,12 +353,14 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 num_tx_rings_p_up; u8 rx_pause; u8 rx_ppp; u8 tx_pause; u8 tx_ppp; int rss_rings; int inline_thold; + struct hwtstamp_config hwtstamp_config; }; struct mlx4_en_profile { @@ -623,8 +625,11 @@ void mlx4_en_set_stats_bitmap(struct mlx4_dev *dev, u8 rx_ppp, u8 rx_pause, u8 tx_ppp, u8 tx_pause); -void mlx4_en_free_resources(struct mlx4_en_priv *priv); -int mlx4_en_alloc_resources(struct mlx4_en_priv *priv); +int mlx4_en_try_alloc_resources(struct mlx4_en_priv *priv, + struct mlx4_en_priv *tmp, + struct mlx4_en_port_profile *prof); +void mlx4_en_safe_replace_resources(struct mlx4_en_priv *priv, + struct mlx4_en_priv *tmp); int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq **pcq, int entries, int ring, enum cq_type mode, int node); -- cgit v0.10.2 From 97b041971e1c70da077fcfa7a50b362e22cd241e Mon Sep 17 00:00:00 2001 From: Douglas Miller Date: Mon, 18 Jul 2016 12:28:45 -0500 Subject: Update maintainer for EHEA driver. Since Thadeu left IBM, EHEA has gone mostly unmaintained, since his email address doesn't work anymore. I'm stepping up to help maintain this driver upstream. I'm adding Thadeu's personal e-mail address in Cc, hoping that we can get his ack. CC: Thadeu Lima de Souza Cascardo Signed-off-by: Douglas Miller Acked-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 1209323..bda8825 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4477,7 +4477,7 @@ S: Orphan F: fs/efs/ EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER -M: Thadeu Lima de Souza Cascardo +M: Douglas Miller L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/ibm/ehea/ -- cgit v0.10.2 From eabfdda93477f6ee5e153f560560e9cb1c617fd7 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Mon, 18 Jul 2016 15:02:06 -0400 Subject: net: switchdev: change ageing_time type to clock_t The switchdev value for the SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute is a clock_t and requires to use helpers such as clock_t_to_jiffies() to convert to milliseconds. Change ageing_time type from u32 to clock_t to make it explicit. Fixes: f55ac58ae64c ("switchdev: add bridge ageing_time attribute") Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller diff --git a/include/net/switchdev.h b/include/net/switchdev.h index 985619a..1d8e158 100644 --- a/include/net/switchdev.h +++ b/include/net/switchdev.h @@ -60,7 +60,7 @@ struct switchdev_attr { struct netdev_phys_item_id ppid; /* PORT_PARENT_ID */ u8 stp_state; /* PORT_STP_STATE */ unsigned long brport_flags; /* PORT_BRIDGE_FLAGS */ - u32 ageing_time; /* BRIDGE_AGEING_TIME */ + clock_t ageing_time; /* BRIDGE_AGEING_TIME */ bool vlan_filtering; /* BRIDGE_VLAN_FILTERING */ } u; }; -- cgit v0.10.2 From e4add7b6beaff4061693d0632bc1dcb306edba10 Mon Sep 17 00:00:00 2001 From: Andrew Duggan Date: Tue, 19 Jul 2016 17:53:59 -0700 Subject: Input: synaptics-rmi4 - fix maximum size check for F12 control register 8 According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan Reported-by: Chris Healy Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 8dd3fb5..88e9155 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -66,7 +66,7 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) struct rmi_device *rmi_dev = fn->rmi_dev; int ret; int offset; - u8 buf[14]; + u8 buf[15]; int pitch_x = 0; int pitch_y = 0; int clip_x_low = 0; @@ -86,9 +86,10 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8); - if (item->reg_size > 14) { - dev_err(&fn->dev, "F12 control8 should be 14 bytes, not: %ld\n", - item->reg_size); + if (item->reg_size > sizeof(buf)) { + dev_err(&fn->dev, + "F12 control8 should be no bigger than %zd bytes, not: %ld\n", + sizeof(buf), item->reg_size); return -ENODEV; } -- cgit v0.10.2 From edbe77462302ec0b11a90244de13f9012118c538 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 19 Jul 2016 14:40:51 +0900 Subject: packet: fix second argument of sock_tx_timestamp() This patch fixes an issue that a syscall (e.g. sendto syscall) cannot work correctly. Since the sendto syscall doesn't have msg_control buffer, the sock_tx_timestamp() in packet_snd() cannot work correctly because the socks.tsflags is set to 0. So, this patch sets the socks.tsflags to sk->sk_tsflags as default. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Reported-by: Kazuya Mizuguchi Reported-by: Keita Kobayashi Signed-off-by: Yoshihiro Shimoda Acked-by: Soheil Hassas Yeganeh Acked-by: Willem de Bruijn Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 9f0983f..53e87ce 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1927,7 +1927,7 @@ retry: goto out_unlock; } - sockc.tsflags = 0; + sockc.tsflags = sk->sk_tsflags; if (msg->msg_controllen) { err = sock_cmsg_send(sk, msg, &sockc); if (unlikely(err)) { @@ -2678,7 +2678,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex); } - sockc.tsflags = 0; + sockc.tsflags = po->sk.sk_tsflags; if (msg->msg_controllen) { err = sock_cmsg_send(&po->sk, msg, &sockc); if (unlikely(err)) @@ -2881,7 +2881,7 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len) if (unlikely(!(dev->flags & IFF_UP))) goto out_unlock; - sockc.tsflags = 0; + sockc.tsflags = sk->sk_tsflags; sockc.mark = sk->sk_mark; if (msg->msg_controllen) { err = sock_cmsg_send(sk, msg, &sockc); -- cgit v0.10.2 From 882b0f2fba83374149f0a5869d95aa8b44dad31e Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Thu, 21 Jul 2016 00:39:53 +0300 Subject: net/mlx5e: Fix del vxlan port command buffer memset memset the command buffers rather than the pointers to them. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c index 05de772..e25a73ed 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vxlan.c @@ -72,8 +72,8 @@ static int mlx5e_vxlan_core_del_port_cmd(struct mlx5_core_dev *mdev, u16 port) u32 in[MLX5_ST_SZ_DW(delete_vxlan_udp_dport_in)]; u32 out[MLX5_ST_SZ_DW(delete_vxlan_udp_dport_out)]; - memset(&in, 0, sizeof(in)); - memset(&out, 0, sizeof(out)); + memset(in, 0, sizeof(in)); + memset(out, 0, sizeof(out)); MLX5_SET(delete_vxlan_udp_dport_in, in, opcode, MLX5_CMD_OP_DELETE_VXLAN_UDP_DPORT); -- cgit v0.10.2 From 510cccb5b0c8868a2b302a0ab524da7912da648b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 27 Jun 2016 14:12:34 -0700 Subject: tty/vt/keyboard: fix OOB access in do_compute_shiftstate() The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS, which is currently 256, whereas number of keys/buttons in input device (and therefor in key_down) is much larger - KEY_CNT - 768, and that can cause out-of-bound access when we do sym = U(key_maps[0][k]); with large 'k'. To fix it we should not attempt iterating beyond smaller of NR_KEYS and KEY_CNT. Also while at it let's switch to for_each_set_bit() instead of open-coding it. Reported-by: Sasha Levin Reviewed-by: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index f973bfc..1e93a37 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -366,34 +366,22 @@ static void to_utf8(struct vc_data *vc, uint c) static void do_compute_shiftstate(void) { - unsigned int i, j, k, sym, val; + unsigned int k, sym, val; shift_state = 0; memset(shift_down, 0, sizeof(shift_down)); - for (i = 0; i < ARRAY_SIZE(key_down); i++) { - - if (!key_down[i]) + for_each_set_bit(k, key_down, min(NR_KEYS, KEY_CNT)) { + sym = U(key_maps[0][k]); + if (KTYP(sym) != KT_SHIFT && KTYP(sym) != KT_SLOCK) continue; - k = i * BITS_PER_LONG; - - for (j = 0; j < BITS_PER_LONG; j++, k++) { - - if (!test_bit(k, key_down)) - continue; + val = KVAL(sym); + if (val == KVAL(K_CAPSSHIFT)) + val = KVAL(K_SHIFT); - sym = U(key_maps[0][k]); - if (KTYP(sym) != KT_SHIFT && KTYP(sym) != KT_SLOCK) - continue; - - val = KVAL(sym); - if (val == KVAL(K_CAPSSHIFT)) - val = KVAL(K_SHIFT); - - shift_down[val]++; - shift_state |= (1 << val); - } + shift_down[val]++; + shift_state |= BIT(val); } } -- cgit v0.10.2 From e9003c9cfaa17d26991688268b04244adb67ee2b Mon Sep 17 00:00:00 2001 From: Michael Welling Date: Wed, 20 Jul 2016 10:02:07 -0700 Subject: Input: tsc200x - report proper input_dev name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Passes input_id struct to the common probe function for the tsc200x drivers instead of just the bustype. This allows for the use of the product variable to set the input_dev->name variable according to the type of touchscreen used. Note that when we introduced support for TSC2004 we started calling everything TSC200X, so let's keep this quirk. Signed-off-by: Michael Welling Cc: stable@vger.kernel.org Acked-by: Pavel Machek Acked-by: Pali Rohár Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc2004.c b/drivers/input/touchscreen/tsc2004.c index 7295c19..6fe55d5 100644 --- a/drivers/input/touchscreen/tsc2004.c +++ b/drivers/input/touchscreen/tsc2004.c @@ -22,6 +22,11 @@ #include #include "tsc200x-core.h" +static const struct input_id tsc2004_input_id = { + .bustype = BUS_I2C, + .product = 2004, +}; + static int tsc2004_cmd(struct device *dev, u8 cmd) { u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd; @@ -42,7 +47,7 @@ static int tsc2004_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - return tsc200x_probe(&i2c->dev, i2c->irq, BUS_I2C, + return tsc200x_probe(&i2c->dev, i2c->irq, &tsc2004_input_id, devm_regmap_init_i2c(i2c, &tsc200x_regmap_config), tsc2004_cmd); } diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index b9f593d..f2c5f0e 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -24,6 +24,11 @@ #include #include "tsc200x-core.h" +static const struct input_id tsc2005_input_id = { + .bustype = BUS_SPI, + .product = 2005, +}; + static int tsc2005_cmd(struct device *dev, u8 cmd) { u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd; @@ -62,7 +67,7 @@ static int tsc2005_probe(struct spi_device *spi) if (error) return error; - return tsc200x_probe(&spi->dev, spi->irq, BUS_SPI, + return tsc200x_probe(&spi->dev, spi->irq, &tsc2005_input_id, devm_regmap_init_spi(spi, &tsc200x_regmap_config), tsc2005_cmd); } diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c index 15240c1..dfa7f1c 100644 --- a/drivers/input/touchscreen/tsc200x-core.c +++ b/drivers/input/touchscreen/tsc200x-core.c @@ -450,7 +450,7 @@ static void tsc200x_close(struct input_dev *input) mutex_unlock(&ts->mutex); } -int tsc200x_probe(struct device *dev, int irq, __u16 bustype, +int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, struct regmap *regmap, int (*tsc200x_cmd)(struct device *dev, u8 cmd)) { @@ -547,9 +547,18 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype, snprintf(ts->phys, sizeof(ts->phys), "%s/input-ts", dev_name(dev)); - input_dev->name = "TSC200X touchscreen"; + if (tsc_id->product == 2004) { + input_dev->name = "TSC200X touchscreen"; + } else { + input_dev->name = devm_kasprintf(dev, GFP_KERNEL, + "TSC%04d touchscreen", + tsc_id->product); + if (!input_dev->name) + return -ENOMEM; + } + input_dev->phys = ts->phys; - input_dev->id.bustype = bustype; + input_dev->id = *tsc_id; input_dev->dev.parent = dev; input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); diff --git a/drivers/input/touchscreen/tsc200x-core.h b/drivers/input/touchscreen/tsc200x-core.h index 7a482d1..49a63a3 100644 --- a/drivers/input/touchscreen/tsc200x-core.h +++ b/drivers/input/touchscreen/tsc200x-core.h @@ -70,7 +70,7 @@ extern const struct regmap_config tsc200x_regmap_config; extern const struct dev_pm_ops tsc200x_pm_ops; -int tsc200x_probe(struct device *dev, int irq, __u16 bustype, +int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, struct regmap *regmap, int (*tsc200x_cmd)(struct device *dev, u8 cmd)); int tsc200x_remove(struct device *dev); -- cgit v0.10.2 From 81dc0365cfa7bc7c08a0e44d9ee04964df782e19 Mon Sep 17 00:00:00 2001 From: Jan Stancek Date: Thu, 30 Jun 2016 12:23:51 +0200 Subject: crypto: qat - make qat_asym_algs.o depend on asn1 headers Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek Signed-off-by: Herbert Xu diff --git a/drivers/crypto/qat/qat_common/Makefile b/drivers/crypto/qat/qat_common/Makefile index 6d74b91..5fc3dbb 100644 --- a/drivers/crypto/qat/qat_common/Makefile +++ b/drivers/crypto/qat/qat_common/Makefile @@ -2,6 +2,7 @@ $(obj)/qat_rsapubkey-asn1.o: $(obj)/qat_rsapubkey-asn1.c \ $(obj)/qat_rsapubkey-asn1.h $(obj)/qat_rsaprivkey-asn1.o: $(obj)/qat_rsaprivkey-asn1.c \ $(obj)/qat_rsaprivkey-asn1.h +$(obj)/qat_asym_algs.o: $(obj)/qat_rsapubkey-asn1.h $(obj)/qat_rsaprivkey-asn1.h clean-files += qat_rsapubkey-asn1.c qat_rsapubkey-asn1.h clean-files += qat_rsaprivkey-asn1.c qat_rsaprivkey-asn1.h -- cgit v0.10.2 From f8e7718cc0445587fe8530fc2d240d9aac2c9072 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Wed, 20 Jul 2016 18:01:18 -0400 Subject: packet: propagate sock_cmsg_send() error sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh Cc: Willem de Bruijn Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 53e87ce..b43c401 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1930,10 +1930,8 @@ retry: sockc.tsflags = sk->sk_tsflags; if (msg->msg_controllen) { err = sock_cmsg_send(sk, msg, &sockc); - if (unlikely(err)) { - err = -EINVAL; + if (unlikely(err)) goto out_unlock; - } } skb->protocol = proto; -- cgit v0.10.2 From cfc9fde0b07c3b44b570057c5f93dda59dca1c94 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 21 Jul 2016 18:24:26 -0700 Subject: ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov Signed-off-by: Miklos Szeredi Cc: diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index c2a6b08..5c9d2d8 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -505,6 +505,7 @@ static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir) struct dentry *upper; struct dentry *opaquedir = NULL; int err; + int flags = 0; if (WARN_ON(!workdir)) return -EROFS; @@ -534,46 +535,39 @@ static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir) if (err) goto out_dput; - whiteout = ovl_whiteout(workdir, dentry); - err = PTR_ERR(whiteout); - if (IS_ERR(whiteout)) + upper = lookup_one_len(dentry->d_name.name, upperdir, + dentry->d_name.len); + err = PTR_ERR(upper); + if (IS_ERR(upper)) goto out_unlock; - upper = ovl_dentry_upper(dentry); - if (!upper) { - upper = lookup_one_len(dentry->d_name.name, upperdir, - dentry->d_name.len); - err = PTR_ERR(upper); - if (IS_ERR(upper)) - goto kill_whiteout; - - err = ovl_do_rename(wdir, whiteout, udir, upper, 0); - dput(upper); - if (err) - goto kill_whiteout; - } else { - int flags = 0; + err = -ESTALE; + if ((opaquedir && upper != opaquedir) || + (!opaquedir && ovl_dentry_upper(dentry) && + upper != ovl_dentry_upper(dentry))) { + goto out_dput_upper; + } - if (opaquedir) - upper = opaquedir; - err = -ESTALE; - if (upper->d_parent != upperdir) - goto kill_whiteout; + whiteout = ovl_whiteout(workdir, dentry); + err = PTR_ERR(whiteout); + if (IS_ERR(whiteout)) + goto out_dput_upper; - if (is_dir) - flags |= RENAME_EXCHANGE; + if (d_is_dir(upper)) + flags = RENAME_EXCHANGE; - err = ovl_do_rename(wdir, whiteout, udir, upper, flags); - if (err) - goto kill_whiteout; + err = ovl_do_rename(wdir, whiteout, udir, upper, flags); + if (err) + goto kill_whiteout; + if (flags) + ovl_cleanup(wdir, upper); - if (is_dir) - ovl_cleanup(wdir, upper); - } ovl_dentry_version_inc(dentry->d_parent); out_d_drop: d_drop(dentry); dput(whiteout); +out_dput_upper: + dput(upper); out_unlock: unlock_rename(workdir, upperdir); out_dput: -- cgit v0.10.2 From 87dcdebd6beb54f183ae874664ba47bf071ebf95 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 22 Jul 2016 17:58:21 +0800 Subject: crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk Signed-off-by: Herbert Xu diff --git a/crypto/rsa-pkcs1pad.c b/crypto/rsa-pkcs1pad.c index ead8dc0..8ba4266 100644 --- a/crypto/rsa-pkcs1pad.c +++ b/crypto/rsa-pkcs1pad.c @@ -102,10 +102,10 @@ struct pkcs1pad_inst_ctx { }; struct pkcs1pad_request { - struct akcipher_request child_req; - struct scatterlist in_sg[3], out_sg[2]; uint8_t *in_buf, *out_buf; + + struct akcipher_request child_req; }; static int pkcs1pad_set_pub_key(struct crypto_akcipher *tfm, const void *key, -- cgit v0.10.2 From 930c532869774ebf8af9efe9484c597f896a7d46 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 19 Jul 2016 03:50:28 +0200 Subject: libceph: apply new_state before new_up_client on incrementals Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov Reviewed-by: Josh Durgin diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c index 03062bb..7e480bf 100644 --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -1261,6 +1261,115 @@ struct ceph_osdmap *ceph_osdmap_decode(void **p, void *end) } /* + * Encoding order is (new_up_client, new_state, new_weight). Need to + * apply in the (new_weight, new_state, new_up_client) order, because + * an incremental map may look like e.g. + * + * new_up_client: { osd=6, addr=... } # set osd_state and addr + * new_state: { osd=6, xorstate=EXISTS } # clear osd_state + */ +static int decode_new_up_state_weight(void **p, void *end, + struct ceph_osdmap *map) +{ + void *new_up_client; + void *new_state; + void *new_weight_end; + u32 len; + + new_up_client = *p; + ceph_decode_32_safe(p, end, len, e_inval); + len *= sizeof(u32) + sizeof(struct ceph_entity_addr); + ceph_decode_need(p, end, len, e_inval); + *p += len; + + new_state = *p; + ceph_decode_32_safe(p, end, len, e_inval); + len *= sizeof(u32) + sizeof(u8); + ceph_decode_need(p, end, len, e_inval); + *p += len; + + /* new_weight */ + ceph_decode_32_safe(p, end, len, e_inval); + while (len--) { + s32 osd; + u32 w; + + ceph_decode_need(p, end, 2*sizeof(u32), e_inval); + osd = ceph_decode_32(p); + w = ceph_decode_32(p); + BUG_ON(osd >= map->max_osd); + pr_info("osd%d weight 0x%x %s\n", osd, w, + w == CEPH_OSD_IN ? "(in)" : + (w == CEPH_OSD_OUT ? "(out)" : "")); + map->osd_weight[osd] = w; + + /* + * If we are marking in, set the EXISTS, and clear the + * AUTOOUT and NEW bits. + */ + if (w) { + map->osd_state[osd] |= CEPH_OSD_EXISTS; + map->osd_state[osd] &= ~(CEPH_OSD_AUTOOUT | + CEPH_OSD_NEW); + } + } + new_weight_end = *p; + + /* new_state (up/down) */ + *p = new_state; + len = ceph_decode_32(p); + while (len--) { + s32 osd; + u8 xorstate; + int ret; + + osd = ceph_decode_32(p); + xorstate = ceph_decode_8(p); + if (xorstate == 0) + xorstate = CEPH_OSD_UP; + BUG_ON(osd >= map->max_osd); + if ((map->osd_state[osd] & CEPH_OSD_UP) && + (xorstate & CEPH_OSD_UP)) + pr_info("osd%d down\n", osd); + if ((map->osd_state[osd] & CEPH_OSD_EXISTS) && + (xorstate & CEPH_OSD_EXISTS)) { + pr_info("osd%d does not exist\n", osd); + map->osd_weight[osd] = CEPH_OSD_IN; + ret = set_primary_affinity(map, osd, + CEPH_OSD_DEFAULT_PRIMARY_AFFINITY); + if (ret) + return ret; + memset(map->osd_addr + osd, 0, sizeof(*map->osd_addr)); + map->osd_state[osd] = 0; + } else { + map->osd_state[osd] ^= xorstate; + } + } + + /* new_up_client */ + *p = new_up_client; + len = ceph_decode_32(p); + while (len--) { + s32 osd; + struct ceph_entity_addr addr; + + osd = ceph_decode_32(p); + ceph_decode_copy(p, &addr, sizeof(addr)); + ceph_decode_addr(&addr); + BUG_ON(osd >= map->max_osd); + pr_info("osd%d up\n", osd); + map->osd_state[osd] |= CEPH_OSD_EXISTS | CEPH_OSD_UP; + map->osd_addr[osd] = addr; + } + + *p = new_weight_end; + return 0; + +e_inval: + return -EINVAL; +} + +/* * decode and apply an incremental map update. */ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end, @@ -1358,49 +1467,10 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end, __remove_pg_pool(&map->pg_pools, pi); } - /* new_up */ - ceph_decode_32_safe(p, end, len, e_inval); - while (len--) { - u32 osd; - struct ceph_entity_addr addr; - ceph_decode_32_safe(p, end, osd, e_inval); - ceph_decode_copy_safe(p, end, &addr, sizeof(addr), e_inval); - ceph_decode_addr(&addr); - pr_info("osd%d up\n", osd); - BUG_ON(osd >= map->max_osd); - map->osd_state[osd] |= CEPH_OSD_UP | CEPH_OSD_EXISTS; - map->osd_addr[osd] = addr; - } - - /* new_state */ - ceph_decode_32_safe(p, end, len, e_inval); - while (len--) { - u32 osd; - u8 xorstate; - ceph_decode_32_safe(p, end, osd, e_inval); - xorstate = **(u8 **)p; - (*p)++; /* clean flag */ - if (xorstate == 0) - xorstate = CEPH_OSD_UP; - if (xorstate & CEPH_OSD_UP) - pr_info("osd%d down\n", osd); - if (osd < map->max_osd) - map->osd_state[osd] ^= xorstate; - } - - /* new_weight */ - ceph_decode_32_safe(p, end, len, e_inval); - while (len--) { - u32 osd, off; - ceph_decode_need(p, end, sizeof(u32)*2, e_inval); - osd = ceph_decode_32(p); - off = ceph_decode_32(p); - pr_info("osd%d weight 0x%x %s\n", osd, off, - off == CEPH_OSD_IN ? "(in)" : - (off == CEPH_OSD_OUT ? "(out)" : "")); - if (osd < map->max_osd) - map->osd_weight[osd] = off; - } + /* new_up_client, new_state, new_weight */ + err = decode_new_up_state_weight(p, end, map); + if (err) + goto bad; /* new_pg_temp */ err = decode_new_pg_temp(p, end, map); -- cgit v0.10.2 From 0bfb85c6ba620c39c0e5124851a1bea0f5a56e05 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 6 Jul 2016 14:54:03 +0200 Subject: gpio: tegra: don't auto-enable for COMPILE_TEST I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 536112f..d786061 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -402,9 +402,12 @@ config GPIO_TB10X select OF_GPIO config GPIO_TEGRA - bool - default y + bool "NVIDIA Tegra GPIO support" + default ARCH_TEGRA depends on ARCH_TEGRA || COMPILE_TEST + depends on OF + help + Say yes here to support GPIO pins on NVIDIA Tegra SoCs. config GPIO_TS4800 tristate "TS-4800 DIO blocks and compatibles" -- cgit v0.10.2 From 73f576c04b9410ed19660f74f97521bee6e1c546 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 20 Jul 2016 15:44:57 -0700 Subject: mm: memcontrol: fix cgroup creation failure after many small jobs The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org Signed-off-by: Johannes Weiner Reported-by: John Garcia Reviewed-by: Vladimir Davydov Acked-by: Tejun Heo Cc: Nikolay Borisov Cc: [3.19+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index a805474..56e6069 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -97,6 +97,11 @@ enum mem_cgroup_events_target { #define MEM_CGROUP_ID_SHIFT 16 #define MEM_CGROUP_ID_MAX USHRT_MAX +struct mem_cgroup_id { + int id; + atomic_t ref; +}; + struct mem_cgroup_stat_cpu { long count[MEMCG_NR_STAT]; unsigned long events[MEMCG_NR_EVENTS]; @@ -172,6 +177,9 @@ enum memcg_kmem_state { struct mem_cgroup { struct cgroup_subsys_state css; + /* Private memcg ID. Used to ID objects that outlive the cgroup */ + struct mem_cgroup_id id; + /* Accounted resources */ struct page_counter memory; struct page_counter swap; @@ -330,22 +338,9 @@ static inline unsigned short mem_cgroup_id(struct mem_cgroup *memcg) if (mem_cgroup_disabled()) return 0; - return memcg->css.id; -} - -/** - * mem_cgroup_from_id - look up a memcg from an id - * @id: the id to look up - * - * Caller must hold rcu_read_lock() and use css_tryget() as necessary. - */ -static inline struct mem_cgroup *mem_cgroup_from_id(unsigned short id) -{ - struct cgroup_subsys_state *css; - - css = css_from_id(id, &memory_cgrp_subsys); - return mem_cgroup_from_css(css); + return memcg->id.id; } +struct mem_cgroup *mem_cgroup_from_id(unsigned short id); /** * parent_mem_cgroup - find the accounting parent of a memcg diff --git a/mm/memcontrol.c b/mm/memcontrol.c index ac8664db..5339c89 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4057,6 +4057,60 @@ static struct cftype mem_cgroup_legacy_files[] = { { }, /* terminate */ }; +/* + * Private memory cgroup IDR + * + * Swap-out records and page cache shadow entries need to store memcg + * references in constrained space, so we maintain an ID space that is + * limited to 16 bit (MEM_CGROUP_ID_MAX), limiting the total number of + * memory-controlled cgroups to 64k. + * + * However, there usually are many references to the oflline CSS after + * the cgroup has been destroyed, such as page cache or reclaimable + * slab objects, that don't need to hang on to the ID. We want to keep + * those dead CSS from occupying IDs, or we might quickly exhaust the + * relatively small ID space and prevent the creation of new cgroups + * even when there are much fewer than 64k cgroups - possibly none. + * + * Maintain a private 16-bit ID space for memcg, and allow the ID to + * be freed and recycled when it's no longer needed, which is usually + * when the CSS is offlined. + * + * The only exception to that are records of swapped out tmpfs/shmem + * pages that need to be attributed to live ancestors on swapin. But + * those references are manageable from userspace. + */ + +static DEFINE_IDR(mem_cgroup_idr); + +static void mem_cgroup_id_get(struct mem_cgroup *memcg) +{ + atomic_inc(&memcg->id.ref); +} + +static void mem_cgroup_id_put(struct mem_cgroup *memcg) +{ + if (atomic_dec_and_test(&memcg->id.ref)) { + idr_remove(&mem_cgroup_idr, memcg->id.id); + memcg->id.id = 0; + + /* Memcg ID pins CSS */ + css_put(&memcg->css); + } +} + +/** + * mem_cgroup_from_id - look up a memcg from a memcg id + * @id: the memcg id to look up + * + * Caller must hold rcu_read_lock(). + */ +struct mem_cgroup *mem_cgroup_from_id(unsigned short id) +{ + WARN_ON_ONCE(!rcu_read_lock_held()); + return idr_find(&mem_cgroup_idr, id); +} + static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node) { struct mem_cgroup_per_node *pn; @@ -4116,6 +4170,12 @@ static struct mem_cgroup *mem_cgroup_alloc(void) if (!memcg) return NULL; + memcg->id.id = idr_alloc(&mem_cgroup_idr, NULL, + 1, MEM_CGROUP_ID_MAX, + GFP_KERNEL); + if (memcg->id.id < 0) + goto fail; + memcg->stat = alloc_percpu(struct mem_cgroup_stat_cpu); if (!memcg->stat) goto fail; @@ -4142,8 +4202,11 @@ static struct mem_cgroup *mem_cgroup_alloc(void) #ifdef CONFIG_CGROUP_WRITEBACK INIT_LIST_HEAD(&memcg->cgwb_list); #endif + idr_replace(&mem_cgroup_idr, memcg, memcg->id.id); return memcg; fail: + if (memcg->id.id > 0) + idr_remove(&mem_cgroup_idr, memcg->id.id); mem_cgroup_free(memcg); return NULL; } @@ -4206,12 +4269,11 @@ fail: return ERR_PTR(-ENOMEM); } -static int -mem_cgroup_css_online(struct cgroup_subsys_state *css) +static int mem_cgroup_css_online(struct cgroup_subsys_state *css) { - if (css->id > MEM_CGROUP_ID_MAX) - return -ENOSPC; - + /* Online state pins memcg ID, memcg ID pins CSS */ + mem_cgroup_id_get(mem_cgroup_from_css(css)); + css_get(css); return 0; } @@ -4234,6 +4296,8 @@ static void mem_cgroup_css_offline(struct cgroup_subsys_state *css) memcg_offline_kmem(memcg); wb_memcg_offline(memcg); + + mem_cgroup_id_put(memcg); } static void mem_cgroup_css_released(struct cgroup_subsys_state *css) @@ -5756,6 +5820,7 @@ void mem_cgroup_swapout(struct page *page, swp_entry_t entry) if (!memcg) return; + mem_cgroup_id_get(memcg); oldid = swap_cgroup_record(entry, mem_cgroup_id(memcg)); VM_BUG_ON_PAGE(oldid, page); mem_cgroup_swap_statistics(memcg, true); @@ -5774,6 +5839,9 @@ void mem_cgroup_swapout(struct page *page, swp_entry_t entry) VM_BUG_ON(!irqs_disabled()); mem_cgroup_charge_statistics(memcg, page, false, -1); memcg_check_events(memcg, page); + + if (!mem_cgroup_is_root(memcg)) + css_put(&memcg->css); } /* @@ -5804,11 +5872,11 @@ int mem_cgroup_try_charge_swap(struct page *page, swp_entry_t entry) !page_counter_try_charge(&memcg->swap, 1, &counter)) return -ENOMEM; + mem_cgroup_id_get(memcg); oldid = swap_cgroup_record(entry, mem_cgroup_id(memcg)); VM_BUG_ON_PAGE(oldid, page); mem_cgroup_swap_statistics(memcg, true); - css_get(&memcg->css); return 0; } @@ -5837,7 +5905,7 @@ void mem_cgroup_uncharge_swap(swp_entry_t entry) page_counter_uncharge(&memcg->memsw, 1); } mem_cgroup_swap_statistics(memcg, false); - css_put(&memcg->css); + mem_cgroup_id_put(memcg); } rcu_read_unlock(); } diff --git a/mm/slab_common.c b/mm/slab_common.c index a65dad7..82317ab 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -526,8 +526,8 @@ void memcg_create_kmem_cache(struct mem_cgroup *memcg, goto out_unlock; cgroup_name(css->cgroup, memcg_name_buf, sizeof(memcg_name_buf)); - cache_name = kasprintf(GFP_KERNEL, "%s(%d:%s)", root_cache->name, - css->id, memcg_name_buf); + cache_name = kasprintf(GFP_KERNEL, "%s(%llu:%s)", root_cache->name, + css->serial_nr, memcg_name_buf); if (!cache_name) goto out_unlock; -- cgit v0.10.2 From 3cb9185c67304b2a7ea9be73e7d13df6fb2793a1 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Wed, 20 Jul 2016 15:45:00 -0700 Subject: radix-tree: fix radix_tree_iter_retry() for tagged iterators. radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin Reported-by: Dmitry Vyukov Acked-by: Konstantin Khlebnikov Cc: Matthew Wilcox Cc: Hugh Dickins Cc: Ross Zwisler Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index cb4b7e8..eca6f62 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -407,6 +407,7 @@ static inline __must_check void **radix_tree_iter_retry(struct radix_tree_iter *iter) { iter->next_index = iter->index; + iter->tags = 0; return NULL; } -- cgit v0.10.2 From b301aac5ad67079710a1a7c7b15bf62cddd63295 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 20 Jul 2016 15:45:03 -0700 Subject: testing/radix-tree: fix a macro expansion bug There are no parentheses around this macro and it causes a problem when we do: index = rand() % THRASH_SIZE; Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwanda Signed-off-by: Dan Carpenter Acked-by: Ross Zwisler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/testing/radix-tree/tag_check.c b/tools/testing/radix-tree/tag_check.c index b7447ce..b0ac057 100644 --- a/tools/testing/radix-tree/tag_check.c +++ b/tools/testing/radix-tree/tag_check.c @@ -122,7 +122,7 @@ enum { NODE_TAGGED = 2, }; -#define THRASH_SIZE 1000 * 1000 +#define THRASH_SIZE (1000 * 1000) #define N 127 #define BATCH 33 -- cgit v0.10.2 From 2d6a4d64812bb12dda53704943b61a7496d02098 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 20 Jul 2016 15:45:05 -0700 Subject: tools/vm/slabinfo: fix an unintentional printf The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda Signed-off-by: Dan Carpenter Acked-by: Christoph Lameter Cc: Sergey Senozhatsky Cc: Colin Ian King Cc: Laura Abbott Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c index 7cf6e17..b9d34b3 100644 --- a/tools/vm/slabinfo.c +++ b/tools/vm/slabinfo.c @@ -510,10 +510,11 @@ static void slab_stats(struct slabinfo *s) s->alloc_node_mismatch, (s->alloc_node_mismatch * 100) / total); } - if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail) + if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail) { printf("\nCmpxchg_double Looping\n------------------------\n"); printf("Locked Cmpxchg Double redos %lu\nUnlocked Cmpxchg Double redos %lu\n", s->cmpxchg_double_fail, s->cmpxchg_double_cpu_fail); + } } static void report(struct slabinfo *s) -- cgit v0.10.2 From 368301f2fe4b07e5fb71dba3cc566bc59eb6705f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 20 Jul 2016 15:45:08 -0700 Subject: pps: do not crash when failed to register With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby Acked-by: Rodolfo Giometti Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c index 38a8bbe..83797d8 100644 --- a/drivers/pps/clients/pps_parport.c +++ b/drivers/pps/clients/pps_parport.c @@ -195,7 +195,7 @@ static void parport_detach(struct parport *port) struct pps_client_pp *device; /* FIXME: oooh, this is ugly! */ - if (strcmp(pardev->name, KBUILD_MODNAME)) + if (!pardev || strcmp(pardev->name, KBUILD_MODNAME)) /* not our port */ return; -- cgit v0.10.2 From 523d939ef98fd712632d93a5a2b588e477a7565e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 Jul 2016 12:23:50 -0700 Subject: Linux 4.7 diff --git a/Makefile b/Makefile index 81b2262..66da9a3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc7 +EXTRAVERSION = NAME = Psychotic Stoned Sheep # *DOCUMENTATION* -- cgit v0.10.2