From 26cbe162df3d0282e5108711663b8dcdafb1ad33 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 4 Apr 2017 19:32:05 +0000 Subject: clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend [ Upstream commit d8ec7595a013237f82d965dcf981571aeb41855b ] The ARM specifies that the system counter "must be implemented in an always-on power domain," and so we try to use the counter as a source of timekeeping across suspend/resume. Unfortunately, some SoCs (e.g., Rockchip's RK3399) do not keep the counter ticking properly when switched from their high-power clock to the lower-power clock used in system suspend. Support this quirk by adding a new device tree property. Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Acked-by: Marc Zyngier Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index ef5fbe9..ad440a2 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -38,6 +38,11 @@ to deliver its interrupts via SPIs. architecturally-defined reset values. Only supported for 32-bit systems which follow the ARMv7 architected reset values. +- arm,no-tick-in-suspend : The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + Example: diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 73c487d..a2503db 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -81,6 +81,7 @@ static struct clock_event_device __percpu *arch_timer_evt; static enum ppi_nr arch_timer_uses_ppi = VIRT_PPI; static bool arch_timer_c3stop; static bool arch_timer_mem_use_virtual; +static bool arch_counter_suspend_stop; static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM); @@ -576,7 +577,7 @@ static struct clocksource clocksource_counter = { .rating = 400, .read = arch_counter_read, .mask = CLOCKSOURCE_MASK(56), - .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static struct cyclecounter cyclecounter = { @@ -616,6 +617,8 @@ static void __init arch_counter_register(unsigned type) arch_timer_read_counter = arch_counter_get_cntvct_mem; } + if (!arch_counter_suspend_stop) + clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; start_count = arch_timer_read_counter(); clocksource_register_hz(&clocksource_counter, arch_timer_rate); cyclecounter.mult = clocksource_counter.mult; @@ -907,6 +910,10 @@ static int __init arch_timer_of_init(struct device_node *np) of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) arch_timer_uses_ppi = PHYS_SECURE_PPI; + /* On some systems, the counter stops ticking when in suspend. */ + arch_counter_suspend_stop = of_property_read_bool(np, + "arm,no-tick-in-suspend"); + return arch_timer_init(); } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); -- cgit v0.10.2