From ac316c783d5bef4240db3de000c1bc74481df88e Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 26 Nov 2015 08:35:41 +0100 Subject: stmmac: fix a filter problem after resuming. When resume the HW is re-configured but some settings can be lost. For example, the MAC Address_X High/Low Registers used for VLAN tagging.. So, while resuming, the set_filter callback needs to be invoked to re-program perfect and hash-table registers. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 64d8aa4..e3d96f2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3102,6 +3102,7 @@ int stmmac_resume(struct net_device *ndev) init_dma_desc_rings(ndev, GFP_ATOMIC); stmmac_hw_setup(ndev, false); stmmac_init_tx_coalesce(priv); + stmmac_set_rx_mode(ndev); napi_enable(&priv->napi); -- cgit v0.10.2 From 61adcc03bd010a494664dc46049dc8da245bc277 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 26 Nov 2015 08:35:42 +0100 Subject: stmmac: fix csr clock divisor for 300MHz This patch is to fix the csr clock in case of 300MHz is provided. Reported-by: Kent Borg Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e3d96f2..6256b32 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -185,7 +185,7 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) priv->clk_csr = STMMAC_CSR_100_150M; else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M)) priv->clk_csr = STMMAC_CSR_150_250M; - else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M)) + else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M)) priv->clk_csr = STMMAC_CSR_250_300M; } } -- cgit v0.10.2 From 22407e13172e9d5257ad3548a4f69bff8ed20111 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 26 Nov 2015 08:35:43 +0100 Subject: stmmac: dwmac-sti: fix st,tx-retime-src check In case of the st,tx-retime-src is missing from device-tree (it's an optional field) the driver will invoke the strcasecmp to check which clock has been selected and this is a bug; the else condition is needed. In the dwmac_setup, the "rs" variable, passed to the strcasecmp, was not initialized and the compiler, depending on the options adopted, could take it in some different part of the stack generating the hang in such configuration. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c index 7f6f4a4..58c05ac 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -299,16 +299,17 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac, if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) { const char *rs; + dwmac->tx_retime_src = TX_RETIME_SRC_CLKGEN; + err = of_property_read_string(np, "st,tx-retime-src", &rs); if (err < 0) { dev_warn(dev, "Use internal clock source\n"); - dwmac->tx_retime_src = TX_RETIME_SRC_CLKGEN; - } else if (!strcasecmp(rs, "clk_125")) { - dwmac->tx_retime_src = TX_RETIME_SRC_CLK_125; - } else if (!strcasecmp(rs, "txclk")) { - dwmac->tx_retime_src = TX_RETIME_SRC_TXCLK; + } else { + if (!strcasecmp(rs, "clk_125")) + dwmac->tx_retime_src = TX_RETIME_SRC_CLK_125; + else if (!strcasecmp(rs, "txclk")) + dwmac->tx_retime_src = TX_RETIME_SRC_TXCLK; } - dwmac->speed = SPEED_1000; } -- cgit v0.10.2 From ae26c1c6cb9bd5ad6fa1dbfdf1fe430ac09b0d28 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 26 Nov 2015 08:35:44 +0100 Subject: stmmac: fix PHY reset during resume When stmmac_mdio_reset, was called from stmmac_resume, it was not resetting the PHY due to which MAC was not getting reset properly and hence ethernet interface not was resumed properly. The issue was currently only reproducible on stih301-b2204. Signed-off-by: Pankaj Dev Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index ebf6abc..bba670c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -138,7 +138,6 @@ int stmmac_mdio_reset(struct mii_bus *bus) #ifdef CONFIG_OF if (priv->device->of_node) { - int reset_gpio, active_low; if (data->reset_gpio < 0) { struct device_node *np = priv->device->of_node; @@ -154,24 +153,23 @@ int stmmac_mdio_reset(struct mii_bus *bus) "snps,reset-active-low"); of_property_read_u32_array(np, "snps,reset-delays-us", data->delays, 3); - } - reset_gpio = data->reset_gpio; - active_low = data->active_low; + if (gpio_request(data->reset_gpio, "mdio-reset")) + return 0; + } - if (!gpio_request(reset_gpio, "mdio-reset")) { - gpio_direction_output(reset_gpio, active_low ? 1 : 0); - if (data->delays[0]) - msleep(DIV_ROUND_UP(data->delays[0], 1000)); + gpio_direction_output(data->reset_gpio, + data->active_low ? 1 : 0); + if (data->delays[0]) + msleep(DIV_ROUND_UP(data->delays[0], 1000)); - gpio_set_value(reset_gpio, active_low ? 0 : 1); - if (data->delays[1]) - msleep(DIV_ROUND_UP(data->delays[1], 1000)); + gpio_set_value(data->reset_gpio, data->active_low ? 0 : 1); + if (data->delays[1]) + msleep(DIV_ROUND_UP(data->delays[1], 1000)); - gpio_set_value(reset_gpio, active_low ? 1 : 0); - if (data->delays[2]) - msleep(DIV_ROUND_UP(data->delays[2], 1000)); - } + gpio_set_value(data->reset_gpio, data->active_low ? 1 : 0); + if (data->delays[2]) + msleep(DIV_ROUND_UP(data->delays[2], 1000)); } #endif -- cgit v0.10.2 From e527c4a769d375ac0472450c52bde29087f49cd9 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Thu, 26 Nov 2015 08:35:45 +0100 Subject: stmmac: fix oversized frame reception The receive skb buffers can be preallocated when the link is opened according to mtu size. While testing on a network environment with not standard MTU (e.g. 3000), a panic occurred if an incoming packet had a length greater than rx skb buffer size. This is because the HW is programmed to copy, from the DMA, an Jumbo frame and the Sw must check if the allocated buffer is enough to store the frame. Signed-off-by: Alexandre TORGUE Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6256b32..3c6549a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2232,6 +2232,12 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) frame_len = priv->hw->desc->get_rx_frame_len(p, coe); + /* check if frame_len fits the preallocated memory */ + if (frame_len > priv->dma_buf_sz) { + priv->dev->stats.rx_length_errors++; + break; + } + /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3 * Type frames (LLC/LLC-SNAP) */ -- cgit v0.10.2