From eb4a2c7f03db06dda0370591c958fa5a62ff2ec3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Apr 2007 00:04:20 +0100 Subject: pata: cable methods Versus upstream as requested Last of the trivial switches to cable_detect methods. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index d8e7988..92a491d 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -33,35 +33,6 @@ */ /** - * generic_pre_reset - probe begin - * @ap: ATA port - * - * Set up cable type and use generic probe init - */ - -static int generic_pre_reset(struct ata_port *ap) -{ - ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); -} - - -/** - * generic_error_handler - Probe specified port on PATA host controller - * @ap: Port to probe - * @classes: - * - * LOCKING: - * None (inherited from caller). - */ - - -static void generic_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -/** * generic_set_mode - mode setting * @ap: interface to set up * @unused: returned device on error @@ -144,8 +115,9 @@ static struct ata_port_operations generic_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = generic_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a2c5756..55d306a 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -93,7 +93,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.10ac1" +#define DRV_VERSION "2.11" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -155,11 +155,11 @@ struct piix_host_priv { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static void piix_pata_error_handler(struct ata_port *ap); -static void ich_pata_error_handler(struct ata_port *ap); static void piix_sata_error_handler(struct ata_port *ap); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static int ich_pata_cable_detect(struct ata_port *ap); static unsigned int in_module_init = 1; @@ -305,6 +305,7 @@ static const struct ata_port_operations piix_pata_ops = { .thaw = ata_bmdma_thaw, .error_handler = piix_pata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -336,8 +337,9 @@ static const struct ata_port_operations ich_pata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ich_pata_error_handler, + .error_handler = piix_pata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ich_pata_cable_detect, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -586,7 +588,7 @@ static const struct ich_laptop ich_laptop[] = { }; /** - * piix_pata_cbl_detect - Probe host controller cable detect info + * ich_pata_cable_detect - Probe host controller cable detect info * @ap: Port for which cable detect info is desired * * Read 80c cable indicator from ATA PCI device's PCI config @@ -596,23 +598,18 @@ static const struct ich_laptop ich_laptop[] = { * None (inherited from caller). */ -static void ich_pata_cbl_detect(struct ata_port *ap) +static int ich_pata_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); const struct ich_laptop *lap = &ich_laptop[0]; u8 tmp, mask; - /* no 80c support in host controller? */ - if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) - goto cbl40; - /* Check for specials - Acer Aspire 5602WLMi */ while (lap->device) { if (lap->device == pdev->device && lap->subvendor == pdev->subsystem_vendor && lap->subdevice == pdev->subsystem_device) { - ap->cbl = ATA_CBL_PATA40_SHORT; - return; + return ATA_CBL_PATA40_SHORT; } lap++; } @@ -621,20 +618,14 @@ static void ich_pata_cbl_detect(struct ata_port *ap) mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); if ((tmp & mask) == 0) - goto cbl40; - - ap->cbl = ATA_CBL_PATA80; - return; - -cbl40: - ap->cbl = ATA_CBL_PATA40; + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; } /** * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * * LOCKING: * None (inherited from caller). */ @@ -644,8 +635,6 @@ static int piix_pata_prereset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) return -ENOENT; - - ap->cbl = ATA_CBL_PATA40; return ata_std_prereset(ap); } @@ -656,30 +645,6 @@ static void piix_pata_error_handler(struct ata_port *ap) } -/** - * ich_pata_prereset - prereset for PATA host controller - * @ap: Target port - * - * - * LOCKING: - * None (inherited from caller). - */ -static int ich_pata_prereset(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) - return -ENOENT; - ich_pata_cbl_detect(ap); - return ata_std_prereset(ap); -} - -static void ich_pata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - static void piix_sata_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL, diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 1838176..5a77e4e 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.2.8" +#define DRV_VERSION "0.3.8" /** * timing_setup - shared timing computation and load @@ -119,32 +119,25 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse } /** - * amd_probe_init - cable detection + * amd_probe_init - perform reset handling * @ap: ATA port * - * Perform cable detection. The BIOS stores this in PCI config - * space for us. + * Reset sequence checking enable bits to see which ports are + * active. */ static int amd_pre_reset(struct ata_port *ap) { - static const u32 bitmask[2] = {0x03, 0x0C}; static const struct pci_bits amd_enable_bits[] = { { 0x40, 1, 0x02, 0x02 }, { 0x40, 1, 0x01, 0x01 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) return -ENOENT; - pci_read_config_byte(pdev, 0x42, &ata66); - if (ata66 & bitmask[ap->port_no]) - ap->cbl = ATA_CBL_PATA80; - else - ap->cbl = ATA_CBL_PATA40; return ata_std_prereset(ap); } @@ -156,28 +149,16 @@ static void amd_error_handler(struct ata_port *ap) ata_std_postreset); } -static int amd_early_pre_reset(struct ata_port *ap) +static int amd_cable_detect(struct ata_port *ap) { + static const u32 bitmask[2] = {0x03, 0x0C}; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - static struct pci_bits amd_enable_bits[] = { - { 0x40, 1, 0x02, 0x02 }, - { 0x40, 1, 0x01, 0x01 } - }; - - if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) - return -ENOENT; - - /* No host side cable detection */ - ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); - -} + u8 ata66; -static void amd_early_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, amd_early_pre_reset, - ata_std_softreset, NULL, - ata_std_postreset); + pci_read_config_byte(pdev, 0x42, &ata66); + if (ata66 & bitmask[ap->port_no]) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; } /** @@ -247,31 +228,16 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) */ static int nv_pre_reset(struct ata_port *ap) { - static const u8 bitmask[2] = {0x03, 0x0C}; static const struct pci_bits nv_enable_bits[] = { { 0x50, 1, 0x02, 0x02 }, { 0x50, 1, 0x01, 0x01 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; - u16 udma; if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) return -ENOENT; - pci_read_config_byte(pdev, 0x52, &ata66); - if (ata66 & bitmask[ap->port_no]) - ap->cbl = ATA_CBL_PATA80; - else - ap->cbl = ATA_CBL_PATA40; - - /* We now have to double check because the Nvidia boxes BIOS - doesn't always set the cable bits but does set mode bits */ - - pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); - if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) - ap->cbl = ATA_CBL_PATA80; return ata_std_prereset(ap); } @@ -281,6 +247,29 @@ static void nv_error_handler(struct ata_port *ap) ata_std_softreset, NULL, ata_std_postreset); } + +static int nv_cable_detect(struct ata_port *ap) +{ + static const u8 bitmask[2] = {0x03, 0x0C}; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + u16 udma; + int cbl; + + pci_read_config_byte(pdev, 0x52, &ata66); + if (ata66 & bitmask[ap->port_no]) + cbl = ATA_CBL_PATA80; + else + cbl = ATA_CBL_PATA40; + + /* We now have to double check because the Nvidia boxes BIOS + doesn't always set the cable bits but does set mode bits */ + pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); + if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) + cbl = ATA_CBL_PATA80; + return cbl; +} + /** * nv100_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -353,8 +342,9 @@ static struct ata_port_operations amd33_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = amd_early_error_handler, + .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -387,8 +377,9 @@ static struct ata_port_operations amd66_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = amd_early_error_handler, + .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -423,6 +414,7 @@ static struct ata_port_operations amd100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -457,6 +449,7 @@ static struct ata_port_operations amd133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = amd_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -491,6 +484,7 @@ static struct ata_port_operations nv100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = nv_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -525,6 +519,7 @@ static struct ata_port_operations nv133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = nv_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -644,6 +639,11 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type == 1 && rev > 0x7) type = 2; +#if defined(CONFIG_ATA_ACPI) + /* Prefer the ACPI driver for Nvidia hardware */ + if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && ata_pata_acpi_present(pdev)) + return -ENODEV; +#endif /* Check for AMD7411 */ if (type == 3) /* FIFO is broken */ diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 1572e5c..08cccc9 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -70,36 +70,23 @@ #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 ) /** - * cs5535_pre_reset - detect cable type + * cs5535_cable_detect - detect cable type * @ap: Port to detect on * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. */ -static int cs5535_pre_reset(struct ata_port *ap) +static int cs5535_cable_detect(struct ata_port *ap) { u8 cable; struct pci_dev *pdev = to_pci_dev(ap->host->dev); pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable); if (cable & 1) - ap->cbl = ATA_CBL_PATA80; + return ATA_CBL_PATA80; else - ap->cbl = ATA_CBL_PATA40; - return ata_std_prereset(ap); -} - -/** - * cs5535_error_handler - reset/probe - * @ap: Port to reset - * - * Reset and configure a port - */ - -static void cs5535_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ATA_CBL_PATA40; } /** @@ -205,8 +192,9 @@ static struct ata_port_operations cs5535_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = cs5535_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = cs5535_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index f69dde5..6ec049c 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -41,17 +41,6 @@ enum { CY82_INDEX_TIMEOUT = 0x32 }; -static int cy82c693_pre_reset(struct ata_port *ap) -{ - ap->cbl = ATA_CBL_PATA40; - return ata_std_prereset(ap); -} - -static void cy82c693_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - /** * cy82c693_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -156,8 +145,9 @@ static struct ata_port_operations cy82c693_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = cy82c693_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index c3e5ea3..93cfa6d 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -169,7 +169,6 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons /** * hpt366_filter - mode selection filter - * @ap: ATA interface * @adev: ATA device * * Block UDMA on devices that cause trouble with this controller. -- cgit v0.10.2