From f30f9a5e7bc130c727712342dd064ae8d188b170 Mon Sep 17 00:00:00 2001 From: Dan McGee Date: Wed, 7 Sep 2011 11:23:19 -0500 Subject: pata_sis: add mode_filter method for certain sis5513 chipsets This mirrors a very old commit (3160d5416f39da9d9, "sis5513: add ->udma_filter method for chipset_family >= ATA_133") to the old sis5513 IDE driver that prevents certain setups from working. UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure this mode is not chosen even if a connected drive supports it. Port this old patch forward to the new PATA driver to ensure UDMA5 is the highest mode used if that is what is supported. Kernel bugzilla #41582. Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Dan McGee Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 10af293..fb4e90f 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -509,6 +509,27 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_dword(pdev, port, t1); } +/** + * sis_133_mode_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA6 on devices that do not support it. + */ + +static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u32 t1; + + pci_read_config_dword(pdev, port, &t1); + /* if ATA133 is disabled, mask it out */ + if (!(t1 & 0x08)) + mask &= ~(0xC0 << ATA_SHIFT_UDMA); + return mask; +} + static struct scsi_host_template sis_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -530,6 +551,7 @@ static struct ata_port_operations sis_133_ops = { .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .cable_detect = sis_133_cable_detect, + .mode_filter = sis_133_mode_filter, }; static struct ata_port_operations sis_133_early_ops = { @@ -779,10 +801,13 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) switch(trueid) { case 0x5518: /* SIS 962/963 */ + dev_info(&pdev->dev, + "SiS 962/963 MuTIOL IDE UDMA133 controller\n"); chipset = &sis133; if ((idemisc & 0x40000000) == 0) { pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); - printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + dev_info(&pdev->dev, + "Switching to 5513 register mapping\n"); } break; case 0x0180: /* SIS 965/965L */ -- cgit v0.10.2