From 85dfb745ee40232876663ae206cba35f24ab2a40 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 18 Feb 2013 16:24:20 +0100 Subject: af_key: initialize satype in key_notify_policy_flush() This field was left uninitialized. Some user daemons perform check against this field. Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert diff --git a/net/key/af_key.c b/net/key/af_key.c index 9ef7985..d5a4a79 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2694,6 +2694,7 @@ static int key_notify_policy_flush(const struct km_event *c) hdr->sadb_msg_pid = c->portid; hdr->sadb_msg_version = PF_KEY_V2; hdr->sadb_msg_errno = (uint8_t) 0; + hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC; hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t)); pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net); return 0; -- cgit v0.10.2 From 27a737ff7cb062fb9cbceba9b44d60aa74862bfa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Mar 2013 23:17:08 +0100 Subject: mac80211: always synchronize_net() during station removal If there are keys left during station removal, then a synchronize_net() will be done (for each key, I have a patch to address this for 3.10), otherwise it won't be done at all which causes issues because the station could be used for TX while it's being removed from the driver -- that might confuse the driver. Fix this by always doing synchronize_net() if no key was present any more. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index a79ce82..238a0cc 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -766,6 +766,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta) struct ieee80211_local *local; struct ieee80211_sub_if_data *sdata; int ret, i; + bool have_key = false; might_sleep(); @@ -793,12 +794,19 @@ int __must_check __sta_info_destroy(struct sta_info *sta) list_del_rcu(&sta->list); mutex_lock(&local->key_mtx); - for (i = 0; i < NUM_DEFAULT_KEYS; i++) + for (i = 0; i < NUM_DEFAULT_KEYS; i++) { __ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i])); - if (sta->ptk) + have_key = true; + } + if (sta->ptk) { __ieee80211_key_free(key_mtx_dereference(local, sta->ptk)); + have_key = true; + } mutex_unlock(&local->key_mtx); + if (!have_key) + synchronize_net(); + sta->dead = true; local->num_sta--; -- cgit v0.10.2 From 021fcdc13acbab78589325ae2db0b384b4ee7222 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 7 Mar 2013 11:08:29 +0200 Subject: cfg80211: fix inconsistency in trace for rdev_set_mac_acl There is NETDEV_ENTRY that was incorrectly assigned as WIPHY_ASSIGN, fix it. Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg diff --git a/net/wireless/trace.h b/net/wireless/trace.h index b7a5313..6847d04 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1778,7 +1778,7 @@ TRACE_EVENT(rdev_set_mac_acl, ), TP_fast_assign( WIPHY_ASSIGN; - WIPHY_ASSIGN; + NETDEV_ASSIGN; __entry->acl_policy = params->acl_policy; ), TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d", -- cgit v0.10.2 From 1345ee6a6d90813f972379fad8b75f17026fc8b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Mar 2013 10:31:05 +0100 Subject: cfg80211: fix potential BSS memory leak and update In the odd case that while updating information from a beacon, a BSS was found that is part of a hidden group, we drop the new information. In this case, however, we leak the IE buffer from the update, and erroneously update the entry's timestamp so it will never time out. Fix both these issues. Cc: Larry Finger Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 674aadc..e93bd31 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -698,11 +698,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR); if (found) { - found->pub.beacon_interval = tmp->pub.beacon_interval; - found->pub.signal = tmp->pub.signal; - found->pub.capability = tmp->pub.capability; - found->ts = tmp->ts; - /* Update IEs */ if (rcu_access_pointer(tmp->pub.proberesp_ies)) { const struct cfg80211_bss_ies *old; @@ -723,6 +718,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (found->pub.hidden_beacon_bss && !list_empty(&found->hidden_list)) { + const struct cfg80211_bss_ies *f; + /* * The found BSS struct is one of the probe * response members of a group, but we're @@ -732,6 +729,10 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, * SSID to showing it, which is confusing so * drop this information. */ + + f = rcu_access_pointer(tmp->pub.beacon_ies); + kfree_rcu((struct cfg80211_bss_ies *)f, + rcu_head); goto drop; } @@ -761,6 +762,11 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); } + + found->pub.beacon_interval = tmp->pub.beacon_interval; + found->pub.signal = tmp->pub.signal; + found->pub.capability = tmp->pub.capability; + found->ts = tmp->ts; } else { struct cfg80211_internal_bss *new; struct cfg80211_internal_bss *hidden; -- cgit v0.10.2 From 07e5a5f5ab7474589c15fc5d88e4f7fc43979530 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Mar 2013 13:22:05 +0100 Subject: mac80211: fix crash with P2P Device returning action frames If a P2P Device interface receives an unhandled action frame, we attempt to return it. This crashes because it doesn't have a channel context. Fix the crash by using status->band and properly mark the return frame as an off-channel frame. Reported-by: Ilan Peer Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index bb73ed2d..c6844ad 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2675,7 +2675,19 @@ ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx) memset(nskb->cb, 0, sizeof(nskb->cb)); - ieee80211_tx_skb(rx->sdata, nskb); + if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb); + + info->flags = IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK | + IEEE80211_TX_CTL_NO_CCK_RATE; + if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) + info->hw_queue = + local->hw.offchannel_tx_hw_queue; + } + + __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7, + status->band); } dev_kfree_skb(rx->skb); return RX_QUEUED; -- cgit v0.10.2 From 0017c0b57500606aab894cdb02fdf3380ddd60ee Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Mon, 11 Mar 2013 10:32:16 +0100 Subject: xfrm: Fix replay notification for esn. We may miscalculate the sequence number difference from the last time we send a notification if a sequence number wrap occured in the meantime. We fix this by adding a separate replay notify function for esn. Here we take the high bits of the sequence number into account to calculate the difference. Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index 35754cc..a390673 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -334,6 +334,72 @@ static void xfrm_replay_notify_bmp(struct xfrm_state *x, int event) x->xflags &= ~XFRM_TIME_DEFER; } +static void xfrm_replay_notify_esn(struct xfrm_state *x, int event) +{ + u32 seq_diff, oseq_diff; + struct km_event c; + struct xfrm_replay_state_esn *replay_esn = x->replay_esn; + struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn; + + /* we send notify messages in case + * 1. we updated on of the sequence numbers, and the seqno difference + * is at least x->replay_maxdiff, in this case we also update the + * timeout of our timer function + * 2. if x->replay_maxage has elapsed since last update, + * and there were changes + * + * The state structure must be locked! + */ + + switch (event) { + case XFRM_REPLAY_UPDATE: + if (!x->replay_maxdiff) + break; + + if (replay_esn->seq_hi == preplay_esn->seq_hi) + seq_diff = replay_esn->seq - preplay_esn->seq; + else + seq_diff = UINT_MAX - preplay_esn->seq + + replay_esn->seq; + + if (replay_esn->oseq_hi == preplay_esn->oseq_hi) + oseq_diff = replay_esn->oseq - preplay_esn->oseq; + else + oseq_diff = UINT_MAX - preplay_esn->oseq + + replay_esn->oseq; + + if (seq_diff < x->replay_maxdiff && + oseq_diff < x->replay_maxdiff) { + + if (x->xflags & XFRM_TIME_DEFER) + event = XFRM_REPLAY_TIMEOUT; + else + return; + } + + break; + + case XFRM_REPLAY_TIMEOUT: + if (memcmp(x->replay_esn, x->preplay_esn, + xfrm_replay_state_esn_len(replay_esn)) == 0) { + x->xflags |= XFRM_TIME_DEFER; + return; + } + + break; + } + + memcpy(x->preplay_esn, x->replay_esn, + xfrm_replay_state_esn_len(replay_esn)); + c.event = XFRM_MSG_NEWAE; + c.data.aevent = event; + km_state_notify(x, &c); + + if (x->replay_maxage && + !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) + x->xflags &= ~XFRM_TIME_DEFER; +} + static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb) { int err = 0; @@ -510,7 +576,7 @@ static struct xfrm_replay xfrm_replay_esn = { .advance = xfrm_replay_advance_esn, .check = xfrm_replay_check_esn, .recheck = xfrm_replay_recheck_esn, - .notify = xfrm_replay_notify_bmp, + .notify = xfrm_replay_notify_esn, .overflow = xfrm_replay_overflow_esn, }; -- cgit v0.10.2 From cc904c7188c29847817f35e6966fec3014c7479b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 14 Mar 2013 08:35:06 +0200 Subject: iwlwifi: fix length check in multi-TB HCMD As reported by Ben Hutchings, there was a harmless issue in the checks being done on the lengths of the TBs while building the TFD for a multi-TB host command. Cc: stable@vger@kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 8595c16..cb5c679 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1264,7 +1264,7 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans, for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) { int copy = 0; - if (!cmd->len) + if (!cmd->len[i]) continue; /* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */ -- cgit v0.10.2 From 4620020b5d7ca34d1c03fa98b0ca457320cb7d71 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 13 Mar 2013 16:38:32 +0200 Subject: iwlwifi: set rfkill in internal state of the transport We didn't update the internal of the PCIe transport when we read the RFkill state directly. Fix that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 17bedc5..12c4f31 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -475,6 +475,10 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* If platform's RF_KILL switch is NOT set to KILL */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill && !run_in_rfkill) return -ERFKILL; @@ -641,6 +645,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill; int err; @@ -656,6 +661,10 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); return 0; @@ -694,6 +703,10 @@ static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans, * op_mode. */ hw_rfkill = iwl_is_rfkill_set(trans); + if (hw_rfkill) + set_bit(STATUS_RFKILL, &trans_pcie->status); + else + clear_bit(STATUS_RFKILL, &trans_pcie->status); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); } } -- cgit v0.10.2 From 2d5d50ee596361566f7f84300117cba7d7672bc5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 31 Jan 2013 15:03:55 +0200 Subject: iwlwifi: dvm: don't send HCMD in restart flow There is a race between the restart flow and the workers. The workers are cancelled after the fw is already killed and might send HCMD when there is fw to handle them. Simply check that there is a fw to which the HCMD can be sent before actually sending it. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 86ea5f4..44ca0e5 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -1262,6 +1262,15 @@ int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) } /* + * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag + * in iwl_down but cancel the workers only later. + */ + if (!priv->ucode_loaded) { + IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id); + return -EIO; + } + + /* * Synchronous commands from this op-mode must hold * the mutex, this ensures we don't try to send two * (or more) synchronous commands at a time. diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index 736fe9b..1a4ac92 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -367,6 +367,8 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return -EIO; } + priv->ucode_loaded = true; + if (ucode_type != IWL_UCODE_WOWLAN) { /* delay a bit to give rfkill time to run */ msleep(5); @@ -380,8 +382,6 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return ret; } - priv->ucode_loaded = true; - return 0; } -- cgit v0.10.2 From ce1eadda6badef9e4e3460097ede674fca47383d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Mar 2013 20:26:57 +0100 Subject: cfg80211: fix wdev tracing crash Arend reported a crash in tracing if the driver returns an ERR_PTR() value from the add_virtual_intf() callback. This is due to the tracing then still attempting to dereference the "pointer", fix this by using IS_ERR_OR_NULL(). Reported-by: Arend van Spriel Tested-by: Arend van Spriel Signed-off-by: Johannes Berg diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 6847d04..7586de77 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -27,7 +27,8 @@ #define WIPHY_PR_ARG __entry->wiphy_name #define WDEV_ENTRY __field(u32, id) -#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0) +#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \ + ? wdev->identifier : 0) #define WDEV_PR_FMT "wdev(%u)" #define WDEV_PR_ARG (__entry->id) -- cgit v0.10.2 From 8b305780ed0c49a49c6bd58a4372fd6b22a5a71e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Mar 2013 22:25:17 +0100 Subject: mac80211: fix virtual monitor interface locking The virtual monitor interface has a locking issue, it calls into the channel context code with the iflist mutex held which isn't allowed since it is usually acquired the other way around. The mutex is still required for the interface iteration, but need not be held across the channel calls. Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index baaa860..3bfe261 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -349,21 +349,19 @@ static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata) static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; - int ret = 0; + int ret; if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF)) return 0; - mutex_lock(&local->iflist_mtx); + ASSERT_RTNL(); if (local->monitor_sdata) - goto out_unlock; + return 0; sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL); - if (!sdata) { - ret = -ENOMEM; - goto out_unlock; - } + if (!sdata) + return -ENOMEM; /* set up data */ sdata->local = local; @@ -377,13 +375,13 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) if (WARN_ON(ret)) { /* ok .. stupid driver, it asked for this! */ kfree(sdata); - goto out_unlock; + return ret; } ret = ieee80211_check_queues(sdata); if (ret) { kfree(sdata); - goto out_unlock; + return ret; } ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef, @@ -391,13 +389,14 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) if (ret) { drv_remove_interface(local, sdata); kfree(sdata); - goto out_unlock; + return ret; } + mutex_lock(&local->iflist_mtx); rcu_assign_pointer(local->monitor_sdata, sdata); - out_unlock: mutex_unlock(&local->iflist_mtx); - return ret; + + return 0; } static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) @@ -407,14 +406,20 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF)) return; + ASSERT_RTNL(); + mutex_lock(&local->iflist_mtx); sdata = rcu_dereference_protected(local->monitor_sdata, lockdep_is_held(&local->iflist_mtx)); - if (!sdata) - goto out_unlock; + if (!sdata) { + mutex_unlock(&local->iflist_mtx); + return; + } rcu_assign_pointer(local->monitor_sdata, NULL); + mutex_unlock(&local->iflist_mtx); + synchronize_net(); ieee80211_vif_release_channel(sdata); @@ -422,8 +427,6 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) drv_remove_interface(local, sdata); kfree(sdata); - out_unlock: - mutex_unlock(&local->iflist_mtx); } /* -- cgit v0.10.2 From f9f475292dbb0e7035fb6661d1524761ea0888d9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Mar 2013 15:04:07 +0100 Subject: cfg80211: always check for scan end on P2P device If a P2P device wdev is removed while it has a scan, then the scan completion might crash later as it is already freed by that time. To avoid the crash always check the scan completion when the P2P device is being removed for some reason. If the driver already canceled it, don't want and free it, otherwise warn and leak it to avoid later crashes. In order to do this, locking needs to be changed away from the rdev mutex (which can't always be guaranteed). For now, use the sched_scan_mtx instead, I'll rename it to just scan_mtx in a later patch. Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 9220021..11743d4 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -212,6 +212,39 @@ static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) rdev_rfkill_poll(rdev); } +void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev) +{ + lockdep_assert_held(&rdev->devlist_mtx); + lockdep_assert_held(&rdev->sched_scan_mtx); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)) + return; + + if (!wdev->p2p_started) + return; + + rdev_stop_p2p_device(rdev, wdev); + wdev->p2p_started = false; + + rdev->opencount--; + + if (rdev->scan_req && rdev->scan_req->wdev == wdev) { + bool busy = work_busy(&rdev->scan_done_wk); + + /* + * If the work isn't pending or running (in which case it would + * be waiting for the lock we hold) the driver didn't properly + * cancel the scan when the interface was removed. In this case + * warn and leak the scan request object to not crash later. + */ + WARN_ON(!busy); + + rdev->scan_req->aborted = true; + ___cfg80211_scan_done(rdev, !busy); + } +} + static int cfg80211_rfkill_set_block(void *data, bool blocked) { struct cfg80211_registered_device *rdev = data; @@ -221,7 +254,8 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked) return 0; rtnl_lock(); - mutex_lock(&rdev->devlist_mtx); + + /* read-only iteration need not hold the devlist_mtx */ list_for_each_entry(wdev, &rdev->wdev_list, list) { if (wdev->netdev) { @@ -231,18 +265,18 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked) /* otherwise, check iftype */ switch (wdev->iftype) { case NL80211_IFTYPE_P2P_DEVICE: - if (!wdev->p2p_started) - break; - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - rdev->opencount--; + /* but this requires it */ + mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); + cfg80211_stop_p2p_device(rdev, wdev); + mutex_unlock(&rdev->sched_scan_mtx); + mutex_unlock(&rdev->devlist_mtx); break; default: break; } } - mutex_unlock(&rdev->devlist_mtx); rtnl_unlock(); return 0; @@ -745,17 +779,13 @@ static void wdev_cleanup_work(struct work_struct *work) wdev = container_of(work, struct wireless_dev, cleanup_work); rdev = wiphy_to_dev(wdev->wiphy); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) { rdev->scan_req->aborted = true; ___cfg80211_scan_done(rdev, true); } - cfg80211_unlock_rdev(rdev); - - mutex_lock(&rdev->sched_scan_mtx); - if (WARN_ON(rdev->sched_scan_req && rdev->sched_scan_req->dev == wdev->netdev)) { __cfg80211_stop_sched_scan(rdev, false); @@ -781,21 +811,19 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev) return; mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); list_del_rcu(&wdev->list); rdev->devlist_generation++; switch (wdev->iftype) { case NL80211_IFTYPE_P2P_DEVICE: - if (!wdev->p2p_started) - break; - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - rdev->opencount--; + cfg80211_stop_p2p_device(rdev, wdev); break; default: WARN_ON_ONCE(1); break; } + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); } EXPORT_SYMBOL(cfg80211_unregister_wdev); @@ -937,6 +965,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, cfg80211_update_iface_num(rdev, wdev->iftype, 1); cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); switch (wdev->iftype) { #ifdef CONFIG_CFG80211_WEXT @@ -968,6 +997,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, break; } wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); rdev->opencount++; mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); diff --git a/net/wireless/core.h b/net/wireless/core.h index 3aec0e4..5845c2b 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -503,6 +503,9 @@ int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype, int num); +void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev); + #define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10 #ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d44ab21..58e13a8 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4702,14 +4702,19 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) if (!rdev->ops->scan) return -EOPNOTSUPP; - if (rdev->scan_req) - return -EBUSY; + mutex_lock(&rdev->sched_scan_mtx); + if (rdev->scan_req) { + err = -EBUSY; + goto unlock; + } if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) { n_channels = validate_scan_freqs( info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]); - if (!n_channels) - return -EINVAL; + if (!n_channels) { + err = -EINVAL; + goto unlock; + } } else { enum ieee80211_band band; n_channels = 0; @@ -4723,23 +4728,29 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) n_ssids++; - if (n_ssids > wiphy->max_scan_ssids) - return -EINVAL; + if (n_ssids > wiphy->max_scan_ssids) { + err = -EINVAL; + goto unlock; + } if (info->attrs[NL80211_ATTR_IE]) ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); else ie_len = 0; - if (ie_len > wiphy->max_scan_ie_len) - return -EINVAL; + if (ie_len > wiphy->max_scan_ie_len) { + err = -EINVAL; + goto unlock; + } request = kzalloc(sizeof(*request) + sizeof(*request->ssids) * n_ssids + sizeof(*request->channels) * n_channels + ie_len, GFP_KERNEL); - if (!request) - return -ENOMEM; + if (!request) { + err = -ENOMEM; + goto unlock; + } if (n_ssids) request->ssids = (void *)&request->channels[n_channels]; @@ -4876,6 +4887,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) kfree(request); } + unlock: + mutex_unlock(&rdev->sched_scan_mtx); return err; } @@ -7749,20 +7762,9 @@ static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info) if (!rdev->ops->stop_p2p_device) return -EOPNOTSUPP; - if (!wdev->p2p_started) - return 0; - - rdev_stop_p2p_device(rdev, wdev); - wdev->p2p_started = false; - - mutex_lock(&rdev->devlist_mtx); - rdev->opencount--; - mutex_unlock(&rdev->devlist_mtx); - - if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) { - rdev->scan_req->aborted = true; - ___cfg80211_scan_done(rdev, true); - } + mutex_lock(&rdev->sched_scan_mtx); + cfg80211_stop_p2p_device(rdev, wdev); + mutex_unlock(&rdev->sched_scan_mtx); return 0; } @@ -8486,7 +8488,7 @@ static int nl80211_add_scan_req(struct sk_buff *msg, struct nlattr *nest; int i; - ASSERT_RDEV_LOCK(rdev); + lockdep_assert_held(&rdev->sched_scan_mtx); if (WARN_ON(!req)) return 0; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index e93bd31..fd99ea4 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -169,7 +169,7 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak) union iwreq_data wrqu; #endif - ASSERT_RDEV_LOCK(rdev); + lockdep_assert_held(&rdev->sched_scan_mtx); request = rdev->scan_req; @@ -230,9 +230,9 @@ void __cfg80211_scan_done(struct work_struct *wk) rdev = container_of(wk, struct cfg80211_registered_device, scan_done_wk); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); ___cfg80211_scan_done(rdev, false); - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); } void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) @@ -1062,6 +1062,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, if (IS_ERR(rdev)) return PTR_ERR(rdev); + mutex_lock(&rdev->sched_scan_mtx); if (rdev->scan_req) { err = -EBUSY; goto out; @@ -1168,6 +1169,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, dev_hold(dev); } out: + mutex_unlock(&rdev->sched_scan_mtx); kfree(creq); cfg80211_unlock_rdev(rdev); return err; diff --git a/net/wireless/sme.c b/net/wireless/sme.c index f432bd3..09d994d 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -85,6 +85,7 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev) ASSERT_RTNL(); ASSERT_RDEV_LOCK(rdev); ASSERT_WDEV_LOCK(wdev); + lockdep_assert_held(&rdev->sched_scan_mtx); if (rdev->scan_req) return -EBUSY; @@ -320,11 +321,9 @@ void cfg80211_sme_scan_done(struct net_device *dev) { struct wireless_dev *wdev = dev->ieee80211_ptr; - mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx); wdev_lock(wdev); __cfg80211_sme_scan_done(dev); wdev_unlock(wdev); - mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx); } void cfg80211_sme_rx_auth(struct net_device *dev, @@ -924,9 +923,12 @@ int cfg80211_connect(struct cfg80211_registered_device *rdev, int err; mutex_lock(&rdev->devlist_mtx); + /* might request scan - scan_mtx -> wdev_mtx dependency */ + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(dev->ieee80211_ptr); err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL); wdev_unlock(dev->ieee80211_ptr); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); return err; diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c index fb9622f..e79cb5c 100644 --- a/net/wireless/wext-sme.c +++ b/net/wireless/wext-sme.c @@ -89,6 +89,7 @@ int cfg80211_mgd_wext_siwfreq(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); if (wdev->sme_state != CFG80211_SME_IDLE) { @@ -135,6 +136,7 @@ int cfg80211_mgd_wext_siwfreq(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; @@ -190,6 +192,7 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); err = 0; @@ -223,6 +226,7 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; @@ -285,6 +289,7 @@ int cfg80211_mgd_wext_siwap(struct net_device *dev, cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); + mutex_lock(&rdev->sched_scan_mtx); wdev_lock(wdev); if (wdev->sme_state != CFG80211_SME_IDLE) { @@ -313,6 +318,7 @@ int cfg80211_mgd_wext_siwap(struct net_device *dev, err = cfg80211_mgd_wext_connect(rdev, wdev); out: wdev_unlock(wdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); return err; -- cgit v0.10.2 From 370bd005937c0e00f9104a602f9fe1dd6b21b54b Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Tue, 19 Mar 2013 17:50:50 -0700 Subject: mac80211: Don't restart sta-timer if not associated. I found another crash when deleting lots of virtual stations in a congested environment. I think the problem is that the ieee80211_mlme_notify_scan_completed could call ieee80211_restart_sta_timer for a stopped interface that was about to be deleted. With the following patch I am unable to reproduce the crash. Signed-off-by: Ben Greear [move check, also make the same change in mesh] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 29ce2aa..4749b38 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -1060,7 +1060,8 @@ void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) - if (ieee80211_vif_is_mesh(&sdata->vif)) + if (ieee80211_vif_is_mesh(&sdata->vif) && + ieee80211_sdata_running(sdata)) ieee80211_queue_work(&local->hw, &sdata->work); rcu_read_unlock(); } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1415774..82cc303 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3608,8 +3608,10 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) /* Restart STA timers */ rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) - ieee80211_restart_sta_timer(sdata); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (ieee80211_sdata_running(sdata)) + ieee80211_restart_sta_timer(sdata); + } rcu_read_unlock(); } -- cgit v0.10.2 From 799ef90c55e692e096d8bd9e5871b95264b1e9ba Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 20 Mar 2013 22:59:11 +0100 Subject: xfrm: Fix esn sequence number diff calculation in xfrm_replay_notify_esn() Commit 0017c0b "xfrm: Fix replay notification for esn." is off by one for the sequence number wrapped case as UINT_MAX is 0xffffffff, not 0x100000000. ;) Just calculate the diff like done everywhere else in the file. Signed-off-by: Mathias Krause Signed-off-by: Steffen Klassert diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index a390673..8dafe6d3 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -359,14 +359,12 @@ static void xfrm_replay_notify_esn(struct xfrm_state *x, int event) if (replay_esn->seq_hi == preplay_esn->seq_hi) seq_diff = replay_esn->seq - preplay_esn->seq; else - seq_diff = UINT_MAX - preplay_esn->seq - + replay_esn->seq; + seq_diff = ~preplay_esn->seq + replay_esn->seq + 1; if (replay_esn->oseq_hi == preplay_esn->oseq_hi) oseq_diff = replay_esn->oseq - preplay_esn->oseq; else - oseq_diff = UINT_MAX - preplay_esn->oseq - + replay_esn->oseq; + oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1; if (seq_diff < x->replay_maxdiff && oseq_diff < x->replay_maxdiff) { -- cgit v0.10.2 From 0f49d64c95944f5701216e900b89aab749edcda2 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 20 Mar 2013 17:56:23 -0700 Subject: mwifiex: reset skb->data after processing PCIe sleep confirm cmd respose This patch is a bug fix for an issue wherein power save was not working for PCIe. This happens because for processing power save sleep confirm command we pull skb so that skb->data points ahead of interface header. We use same skb to get other cmda responses as well. So if we don't push skb after processing cmd response, it results into reduction in skb->len and finally skb->len reaches zero. This causes failure in processing sleep command response. Fix this by pushing skb by INTF_HEADER_LEN at the end of command response processing. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 5c395e2..feb2046 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1508,6 +1508,7 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) } memcpy(adapter->upld_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); + skb_push(skb, INTF_HEADER_LEN); if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, PCI_DMA_FROMDEVICE)) return -1; -- cgit v0.10.2 From d6b057b5dbba97e6ba13aace5270babd7c8b658c Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:35 +0000 Subject: e1000: ethtool: Add missing dma_mapping_error-call in e1000_setup_desc_rings After dma_map_single, dma_mapping_error must be called. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 43462d5..ffd2871 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1053,6 +1053,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) { + ret_val = 4; + goto err_nomem; + } tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); tx_desc->lower.data = cpu_to_le32(skb->len); tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | @@ -1069,7 +1073,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), GFP_KERNEL); if (!rxdr->buffer_info) { - ret_val = 4; + ret_val = 5; goto err_nomem; } @@ -1077,7 +1081,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, GFP_KERNEL); if (!rxdr->desc) { - ret_val = 5; + ret_val = 6; goto err_nomem; } memset(rxdr->desc, 0, rxdr->size); @@ -1101,7 +1105,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); if (!skb) { - ret_val = 6; + ret_val = 7; goto err_nomem; } skb_reserve(skb, NET_IP_ALIGN); @@ -1110,6 +1114,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, E1000_RXBUFFER_2048, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) { + ret_val = 8; + goto err_nomem; + } rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); memset(skb->data, 0x00, skb->len); } -- cgit v0.10.2 From 065946c65a61943b4c609a0a1b1bac6742b3b593 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:41 +0000 Subject: ixgb: Add missing dma_mapping_error-call in ixgb_alloc_rx_buffers After dma_map_single, dma_mapping_error must be called. It seems safe to not free the skb allocated in this function, as the skb can be reused later. Additionally this patch fixes one coding-style error. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ea48083..b5f94ab 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -2159,6 +2159,10 @@ map_skb: skb->data, adapter->rx_buffer_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } rx_desc = IXGB_RX_DESC(*rx_ring, i); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); @@ -2168,7 +2172,8 @@ map_skb: rx_desc->status = 0; - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; buffer_info = &rx_ring->buffer_info[i]; } -- cgit v0.10.2 From 37287fae7e4506fb0822523587c769783164cdd6 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Wed, 20 Mar 2013 08:59:46 +0000 Subject: e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffers After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 948b86ff..7e615e2 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -848,11 +848,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); -- cgit v0.10.2 From f901b6bc404b67d96eca739857c097e022727b71 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 11:36:42 +0100 Subject: can: sja1000: fix define conflict on SH Thias patch fixes a define conflict between the SH architecture and the sja1000 driver: drivers/net/can/sja1000/sja1000.h:59:0: warning: "REG_SR" redefined [enabled by default] arch/sh/include/asm/ptrace_32.h:25:0: note: this is the location of the previous definition A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h. Cc: linux-stable Reported-by: Fengguang Wu Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index a042cdc..3c18d7d 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -348,7 +348,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) */ if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == REG_CR_BASICCAN_INITIAL && - (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) && + (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) && (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL)) flag = 1; @@ -360,7 +360,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) * See states on p. 23 of the Datasheet. */ if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL && - priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL && + priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL && priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL) return flag; diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index daf4013..e4df307 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -92,7 +92,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) */ spin_lock_irqsave(&priv->cmdreg_lock, flags); priv->write_reg(priv, REG_CMR, val); - priv->read_reg(priv, REG_SR); + priv->read_reg(priv, SJA1000_REG_SR); spin_unlock_irqrestore(&priv->cmdreg_lock, flags); } @@ -502,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) { n++; - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller due to hw unplug */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; @@ -530,7 +530,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) /* receive interrupt */ while (status & SR_RBS) { sja1000_rx(dev); - status = priv->read_reg(priv, REG_SR); + status = priv->read_reg(priv, SJA1000_REG_SR); /* check for absent controller */ if (status == 0xFF && sja1000_is_absent(priv)) return IRQ_NONE; diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h index afa9984..aa48e05 100644 --- a/drivers/net/can/sja1000/sja1000.h +++ b/drivers/net/can/sja1000/sja1000.h @@ -56,7 +56,7 @@ /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ #define REG_MOD 0x00 #define REG_CMR 0x01 -#define REG_SR 0x02 +#define SJA1000_REG_SR 0x02 #define REG_IR 0x03 #define REG_IER 0x04 #define REG_ALC 0x0B -- cgit v0.10.2 From 3fd33497f80aa528ded0db2851b48638635d5caa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 27 Mar 2013 12:47:13 +0100 Subject: can: sja1000: limit PEAK PCAN-PC Card to HAS_IOPORT This patch limits the PEAK PCAN-PC Card driver to systems with ioports. Fixes a compile time breakage on SH: drivers/net/can/sja1000/peak_pcmcia.c:626:2: error: implicit declaration of function 'ioport_unmap' Reported-by: Fengguang Wu Cc: Paul Mundt Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b39ca5b..ff2ba86 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -46,6 +46,7 @@ config CAN_EMS_PCI config CAN_PEAK_PCMCIA tristate "PEAK PCAN-PC Card" depends on PCMCIA + depends on HAS_IOPORT ---help--- This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) from PEAK-System (http://www.peak-system.com). To compile this -- cgit v0.10.2 From 54683441a92ebe20c5282465ea6f21e5e74d2974 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 Mar 2013 10:52:11 -0400 Subject: Revert "brcmsmac: support 4313iPA" This reverts commit b6fc28a158076ca2764edc9a6d1e1402f56e1c0c. This commit is reported to cause a regression in the support for some revisions of 4313 ePA devices. http://marc.info/?l=linux-wireless&m=136360340200943&w=2 Conflicts: drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c Reported-by: David Herrmann Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 21a8242..18d3764 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1137,9 +1137,8 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, gain0_15 = ((biq1 & 0xf) << 12) | ((tia & 0xf) << 8) | ((lna2 & 0x3) << 6) | - ((lna2 & 0x3) << 4) | - ((lna1 & 0x3) << 2) | - ((lna1 & 0x3) << 0); + ((lna2 & + 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0); mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0); mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0); @@ -1157,8 +1156,6 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, } mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0); - mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11); - mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3); } @@ -1331,43 +1328,6 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples) return (iq_est.i_pwr + iq_est.q_pwr) / nsamples; } -static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain, - u16 tia_gain, u16 lna2_gain) -{ - u32 i_thresh_l, q_thresh_l; - u32 i_thresh_h, q_thresh_h; - struct lcnphy_iq_est iq_est_h, iq_est_l; - - wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain, - lna2_gain, 0); - - wlc_lcnphy_rx_gain_override_enable(pi, true); - wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l)) - return false; - - wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0); - udelay(500); - write_radio_reg(pi, RADIO_2064_REG112, 0); - if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h)) - return false; - - i_thresh_l = (iq_est_l.i_pwr << 1); - i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr; - - q_thresh_l = (iq_est_l.q_pwr << 1); - q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr; - if ((iq_est_h.i_pwr > i_thresh_l) && - (iq_est_h.i_pwr < i_thresh_h) && - (iq_est_h.q_pwr > q_thresh_l) && - (iq_est_h.q_pwr < q_thresh_h)) - return true; - - return false; -} - static bool wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, const struct lcnphy_rx_iqcomp *iqcomp, @@ -1382,8 +1342,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old, rfoverride3_old, rfoverride3val_old, rfoverride4_old, rfoverride4val_old, afectrlovr_old, afectrlovrval_old; - int tia_gain, lna2_gain, biq1_gain; - bool set_gain; + int tia_gain; + u32 received_power, rx_pwr_threshold; u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl; u16 values_to_save[11]; s16 *ptr; @@ -1408,134 +1368,126 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, goto cal_done; } - WARN_ON(module != 1); - tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - - for (i = 0; i < 11; i++) - values_to_save[i] = - read_radio_reg(pi, rxiq_cal_rf_reg[i]); - Core1TxControl_old = read_phy_reg(pi, 0x631); - - or_phy_reg(pi, 0x631, 0x0015); - - RFOverride0_old = read_phy_reg(pi, 0x44c); - RFOverrideVal0_old = read_phy_reg(pi, 0x44d); - rfoverride2_old = read_phy_reg(pi, 0x4b0); - rfoverride2val_old = read_phy_reg(pi, 0x4b1); - rfoverride3_old = read_phy_reg(pi, 0x4f9); - rfoverride3val_old = read_phy_reg(pi, 0x4fa); - rfoverride4_old = read_phy_reg(pi, 0x938); - rfoverride4val_old = read_phy_reg(pi, 0x939); - afectrlovr_old = read_phy_reg(pi, 0x43b); - afectrlovrval_old = read_phy_reg(pi, 0x43c); - old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); - old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); - - tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); - if (tx_gain_override_old) { - wlc_lcnphy_get_tx_gain(pi, &old_gains); - tx_gain_index_old = pi_lcn->lcnphy_current_index; - } - - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); + if (module == 1) { - mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); + tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); + wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); + for (i = 0; i < 11; i++) + values_to_save[i] = + read_radio_reg(pi, rxiq_cal_rf_reg[i]); + Core1TxControl_old = read_phy_reg(pi, 0x631); + + or_phy_reg(pi, 0x631, 0x0015); + + RFOverride0_old = read_phy_reg(pi, 0x44c); + RFOverrideVal0_old = read_phy_reg(pi, 0x44d); + rfoverride2_old = read_phy_reg(pi, 0x4b0); + rfoverride2val_old = read_phy_reg(pi, 0x4b1); + rfoverride3_old = read_phy_reg(pi, 0x4f9); + rfoverride3val_old = read_phy_reg(pi, 0x4fa); + rfoverride4_old = read_phy_reg(pi, 0x938); + rfoverride4val_old = read_phy_reg(pi, 0x939); + afectrlovr_old = read_phy_reg(pi, 0x43b); + afectrlovrval_old = read_phy_reg(pi, 0x43c); + old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); + old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); + + tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); + if (tx_gain_override_old) { + wlc_lcnphy_get_tx_gain(pi, &old_gains); + tx_gain_index_old = pi_lcn->lcnphy_current_index; + } - write_radio_reg(pi, RADIO_2064_REG116, 0x06); - write_radio_reg(pi, RADIO_2064_REG12C, 0x07); - write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); - write_radio_reg(pi, RADIO_2064_REG098, 0x03); - write_radio_reg(pi, RADIO_2064_REG00B, 0x7); - mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); - write_radio_reg(pi, RADIO_2064_REG01D, 0x01); - write_radio_reg(pi, RADIO_2064_REG114, 0x01); - write_radio_reg(pi, RADIO_2064_REG02E, 0x10); - write_radio_reg(pi, RADIO_2064_REG12A, 0x08); - - mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); - mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); - mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); - mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); - write_phy_reg(pi, 0x6da, 0xffff); - or_phy_reg(pi, 0x6db, 0x3); + mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); - wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); - set_gain = false; - - lna2_gain = 3; - while ((lna2_gain >= 0) && !set_gain) { - tia_gain = 4; - - while ((tia_gain >= 0) && !set_gain) { - biq1_gain = 6; - - while ((biq1_gain >= 0) && !set_gain) { - set_gain = wlc_lcnphy_rx_iq_cal_gain(pi, - (u16) - biq1_gain, - (u16) - tia_gain, - (u16) - lna2_gain); - biq1_gain -= 1; - } + write_radio_reg(pi, RADIO_2064_REG116, 0x06); + write_radio_reg(pi, RADIO_2064_REG12C, 0x07); + write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); + write_radio_reg(pi, RADIO_2064_REG098, 0x03); + write_radio_reg(pi, RADIO_2064_REG00B, 0x7); + mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); + write_radio_reg(pi, RADIO_2064_REG01D, 0x01); + write_radio_reg(pi, RADIO_2064_REG114, 0x01); + write_radio_reg(pi, RADIO_2064_REG02E, 0x10); + write_radio_reg(pi, RADIO_2064_REG12A, 0x08); + + mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); + mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); + + mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); + + wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); + write_phy_reg(pi, 0x6da, 0xffff); + or_phy_reg(pi, 0x6db, 0x3); + wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); + wlc_lcnphy_rx_gain_override_enable(pi, true); + + tia_gain = 8; + rx_pwr_threshold = 950; + while (tia_gain > 0) { tia_gain -= 1; + wlc_lcnphy_set_rx_gain_by_distribution(pi, + 0, 0, 2, 2, + (u16) + tia_gain, 1, 0); + udelay(500); + + received_power = + wlc_lcnphy_measure_digital_power(pi, 2000); + if (received_power < rx_pwr_threshold) + break; } - lna2_gain -= 1; - } + result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); - if (set_gain) - result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024); - else - result = false; + wlc_lcnphy_stop_tx_tone(pi); - wlc_lcnphy_stop_tx_tone(pi); + write_phy_reg(pi, 0x631, Core1TxControl_old); - write_phy_reg(pi, 0x631, Core1TxControl_old); - - write_phy_reg(pi, 0x44c, RFOverrideVal0_old); - write_phy_reg(pi, 0x44d, RFOverrideVal0_old); - write_phy_reg(pi, 0x4b0, rfoverride2_old); - write_phy_reg(pi, 0x4b1, rfoverride2val_old); - write_phy_reg(pi, 0x4f9, rfoverride3_old); - write_phy_reg(pi, 0x4fa, rfoverride3val_old); - write_phy_reg(pi, 0x938, rfoverride4_old); - write_phy_reg(pi, 0x939, rfoverride4val_old); - write_phy_reg(pi, 0x43b, afectrlovr_old); - write_phy_reg(pi, 0x43c, afectrlovrval_old); - write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); - write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); + write_phy_reg(pi, 0x44c, RFOverrideVal0_old); + write_phy_reg(pi, 0x44d, RFOverrideVal0_old); + write_phy_reg(pi, 0x4b0, rfoverride2_old); + write_phy_reg(pi, 0x4b1, rfoverride2val_old); + write_phy_reg(pi, 0x4f9, rfoverride3_old); + write_phy_reg(pi, 0x4fa, rfoverride3val_old); + write_phy_reg(pi, 0x938, rfoverride4_old); + write_phy_reg(pi, 0x939, rfoverride4val_old); + write_phy_reg(pi, 0x43b, afectrlovr_old); + write_phy_reg(pi, 0x43c, afectrlovrval_old); + write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); + write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); - wlc_lcnphy_clear_trsw_override(pi); + wlc_lcnphy_clear_trsw_override(pi); - mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); + mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); - for (i = 0; i < 11; i++) - write_radio_reg(pi, rxiq_cal_rf_reg[i], - values_to_save[i]); + for (i = 0; i < 11; i++) + write_radio_reg(pi, rxiq_cal_rf_reg[i], + values_to_save[i]); - if (tx_gain_override_old) - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); - else - wlc_lcnphy_disable_tx_gain_override(pi); + if (tx_gain_override_old) + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); + else + wlc_lcnphy_disable_tx_gain_override(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); - wlc_lcnphy_rx_gain_override_enable(pi, false); + wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); + wlc_lcnphy_rx_gain_override_enable(pi, false); + } cal_done: kfree(ptr); @@ -1829,17 +1781,6 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel) write_radio_reg(pi, RADIO_2064_REG038, 3); write_radio_reg(pi, RADIO_2064_REG091, 7); } - - if (!(pi->sh->boardflags & BFL_FEM)) { - u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc, - 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0}; - - write_radio_reg(pi, RADIO_2064_REG02A, 0xf); - write_radio_reg(pi, RADIO_2064_REG091, 0x3); - write_radio_reg(pi, RADIO_2064_REG038, 0x3); - - write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]); - } } static int @@ -2034,16 +1975,6 @@ wlc_lcnphy_set_tssi_mux(struct brcms_phy *pi, enum lcnphy_tssi_mode pos) } else { mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2); - mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77); - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1); - mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7); - mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1); - mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4); } } else { mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2); @@ -2130,14 +2061,12 @@ static void wlc_lcnphy_pwrctrl_rssiparams(struct brcms_phy *pi) (auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12)); mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5)); - mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0)); } static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) { struct phytbl_info tab; u32 rfseq, ind; - u8 tssi_sel; tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; @@ -2159,13 +2088,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4); - if (pi->sh->boardflags & BFL_FEM) { - tssi_sel = 0x1; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); - } else { - tssi_sel = 0xe; - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA); - } + wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14); mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15); @@ -2201,10 +2124,9 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0); if (LCNREV_IS(pi->pubpi.phy_rev, 2)) { - mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel); + mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe); mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4); } else { - mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1); mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3); } @@ -2251,10 +2173,6 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8); - mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0); - mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); - mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); - wlc_lcnphy_pwrctrl_rssiparams(pi); } @@ -2873,8 +2791,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) read_radio_reg(pi, RADIO_2064_REG007) & 1; u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10; u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4; - u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi); - idleTssi = read_phy_reg(pi, 0x4ab); suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) & MCTL_EN_MAC)); @@ -2892,12 +2808,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4); mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2); wlc_lcnphy_tssi_setup(pi); - - mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0)); - mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6)); - - wlc_lcnphy_set_bbmult(pi, 0x0); - wlc_phy_do_dummy_tx(pi, true, OFF); idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0)) >> 0); @@ -2919,7 +2829,6 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12); - wlc_lcnphy_set_bbmult(pi, SAVE_bbmult); wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old); wlc_lcnphy_set_tx_gain(pi, &old_gains); wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl); @@ -3133,11 +3042,6 @@ static void wlc_lcnphy_tx_pwr_ctrl_init(struct brcms_phy_pub *ppi) wlc_lcnphy_write_table(pi, &tab); tab.tbl_offset++; } - mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0); - mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8); - mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4); - mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2); mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7); @@ -3939,6 +3843,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) target_gains.pad_gain = 21; target_gains.dac_gain = 0; wlc_lcnphy_set_tx_gain(pi, &target_gains); + wlc_lcnphy_set_tx_pwr_by_index(pi, 16); if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) { @@ -3949,7 +3854,6 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) lcnphy_recal ? LCNPHY_CAL_RECAL : LCNPHY_CAL_FULL), false); } else { - wlc_lcnphy_set_tx_pwr_by_index(pi, 16); wlc_lcnphy_tx_iqlo_soft_cal_full(pi); } @@ -4374,22 +4278,17 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi, if (CHSPEC_IS5G(pi->radio_chanspec)) pa_gain = 0x70; else - pa_gain = 0x60; + pa_gain = 0x70; if (pi->sh->boardflags & BFL_FEM) pa_gain = 0x10; - tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; tab.tbl_len = 1; tab.tbl_ptr = &val; for (j = 0; j < 128; j++) { - if (pi->sh->boardflags & BFL_FEM) - gm_gain = gain_table[j].gm; - else - gm_gain = 15; - + gm_gain = gain_table[j].gm; val = (((u32) pa_gain << 24) | (gain_table[j].pad << 16) | (gain_table[j].pga << 8) | gm_gain); @@ -4600,10 +4499,7 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) write_phy_reg(pi, 0x4ea, 0x4688); - if (pi->sh->boardflags & BFL_FEM) - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); - else - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0); + mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6); @@ -4614,13 +4510,6 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) wlc_lcnphy_rcal(pi); wlc_lcnphy_rc_cal(pi); - - if (!(pi->sh->boardflags & BFL_FEM)) { - write_radio_reg(pi, RADIO_2064_REG032, 0x6f); - write_radio_reg(pi, RADIO_2064_REG033, 0x19); - write_radio_reg(pi, RADIO_2064_REG039, 0xe); - } - } static void wlc_lcnphy_radio_init(struct brcms_phy *pi) @@ -4650,20 +4539,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) wlc_lcnphy_write_table(pi, &tab); } - if (!(pi->sh->boardflags & BFL_FEM)) { - tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; - tab.tbl_width = 16; - tab.tbl_ptr = &val; - tab.tbl_len = 1; + tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; + tab.tbl_width = 16; + tab.tbl_ptr = &val; + tab.tbl_len = 1; - val = 150; - tab.tbl_offset = 0; - wlc_lcnphy_write_table(pi, &tab); + val = 114; + tab.tbl_offset = 0; + wlc_lcnphy_write_table(pi, &tab); - val = 220; - tab.tbl_offset = 1; - wlc_lcnphy_write_table(pi, &tab); - } + val = 130; + tab.tbl_offset = 1; + wlc_lcnphy_write_table(pi, &tab); + + val = 6; + tab.tbl_offset = 8; + wlc_lcnphy_write_table(pi, &tab); if (CHSPEC_IS2G(pi->radio_chanspec)) { if (pi->sh->boardflags & BFL_FEM) @@ -5055,7 +4946,6 @@ void wlc_phy_chanspec_set_lcnphy(struct brcms_phy *pi, u16 chanspec) wlc_lcnphy_load_tx_iir_filter(pi, true, 3); mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3); - wlc_lcnphy_tssi_setup(pi); } void wlc_phy_detach_lcnphy(struct brcms_phy *pi) @@ -5094,7 +4984,8 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi) if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) return false; - if (LCNREV_IS(pi->pubpi.phy_rev, 1)) { + if ((pi->sh->boardflags & BFL_FEM) && + (LCNREV_IS(pi->pubpi.phy_rev, 1))) { if (pi_lcn->lcnphy_tempsense_option == 3) { pi->hwpwrctrl = true; pi->hwpwrctrl_capable = true; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index b7e95ac..622c01c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -1992,70 +1992,70 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_epa_rev0[] = { }; static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = { - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, - 0x0009, 0x000a, - 0x0005, - 0x0006, 0x0009, - 0x000a, - 0x0005, 0x0006, - 0x0009, - 0x000a, 0x0005, - 0x0006, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, + 0x000a, 0x0009, + 0x0006, + 0x0005, 0x000a, + 0x0009, + 0x0006, 0x0005, + 0x000a, + 0x0009, 0x0006, + 0x0005, }; static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = { -- cgit v0.10.2 From e67dd874e60529dbd2e8232babb1e23479ba2ffa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 19 Mar 2013 07:52:48 +0100 Subject: b43: N-PHY: increase initial value of "mind" in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're using "mind" variable to find the VCM that got the best polling results. For each VCM we calculte "currd" which is compared to the "mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a value smaller than 40 makes no sense, so increase the initial value. This fixes a regression introduced in 3.4 by commit: e0c9a0219a8f542e3946fe972a68aacf8c3f906c (my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s) Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 3c35382..e014a7a 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1615,7 +1615,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) } for (i = 0; i < 4; i += 2) { s32 curr; - s32 mind = 40; + s32 mind = 0x100000; s32 minpoll = 249; u8 minvcm = 0; if (2 * core != i) @@ -1799,7 +1799,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) } for (i = 0; i < 4; i++) { - s32 mind = 40; + s32 mind = 0x100000; u8 minvcm = 0; s32 minpoll = 249; s32 curr; -- cgit v0.10.2 From b251412db99ccd4495ce372fec7daee27bf06923 Mon Sep 17 00:00:00 2001 From: "Iestyn C. Elfick" Date: Wed, 20 Mar 2013 14:02:31 -0500 Subject: b43: A fix for DMA transmission sequence errors Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 38bc5a7..1221469 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1487,8 +1487,12 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, const struct b43_dma_ops *ops; struct b43_dmaring *ring; struct b43_dmadesc_meta *meta; + static const struct b43_txstatus fake; /* filled with 0 */ + const struct b43_txstatus *txstat; int slot, firstused; bool frame_succeed; + int skip; + static u8 err_out1, err_out2; ring = parse_cookie(dev, status->cookie, &slot); if (unlikely(!ring)) @@ -1501,13 +1505,36 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, firstused = ring->current_slot - ring->used_slots + 1; if (firstused < 0) firstused = ring->nr_slots + firstused; + + skip = 0; if (unlikely(slot != firstused)) { /* This possibly is a firmware bug and will result in - * malfunction, memory leaks and/or stall of DMA functionality. */ - b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. " - "Expected %d, but got %d\n", - ring->index, firstused, slot); - return; + * malfunction, memory leaks and/or stall of DMA functionality. + */ + if (slot == next_slot(ring, next_slot(ring, firstused))) { + /* If a single header/data pair was missed, skip over + * the first two slots in an attempt to recover. + */ + slot = firstused; + skip = 2; + if (!err_out1) { + /* Report the error once. */ + b43dbg(dev->wl, + "Skip on DMA ring %d slot %d.\n", + ring->index, slot); + err_out1 = 1; + } + } else { + /* More than a single header/data pair were missed. + * Report this error once. + */ + if (!err_out2) + b43dbg(dev->wl, + "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n", + ring->index, firstused, slot); + err_out2 = 1; + return; + } } ops = ring->ops; @@ -1522,11 +1549,13 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, slot, firstused, ring->index); break; } + if (meta->skb) { struct b43_private_tx_info *priv_info = - b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); + b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); - unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1); + unmap_descbuffer(ring, meta->dmaaddr, + meta->skb->len, 1); kfree(priv_info->bouncebuffer); priv_info->bouncebuffer = NULL; } else { @@ -1538,8 +1567,9 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, struct ieee80211_tx_info *info; if (unlikely(!meta->skb)) { - /* This is a scatter-gather fragment of a frame, so - * the skb pointer must not be NULL. */ + /* This is a scatter-gather fragment of a frame, + * so the skb pointer must not be NULL. + */ b43dbg(dev->wl, "TX status unexpected NULL skb " "at slot %d (first=%d) on ring %d\n", slot, firstused, ring->index); @@ -1550,9 +1580,18 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* * Call back to inform the ieee80211 subsystem about - * the status of the transmission. + * the status of the transmission. When skipping over + * a missed TX status report, use a status structure + * filled with zeros to indicate that the frame was not + * sent (frame_count 0) and not acknowledged */ - frame_succeed = b43_fill_txstatus_report(dev, info, status); + if (unlikely(skip)) + txstat = &fake; + else + txstat = status; + + frame_succeed = b43_fill_txstatus_report(dev, info, + txstat); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; @@ -1580,12 +1619,14 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, /* Everything unmapped and free'd. So it's not used anymore. */ ring->used_slots--; - if (meta->is_last_fragment) { + if (meta->is_last_fragment && !skip) { /* This is the last scatter-gather * fragment of the frame. We are done. */ break; } slot = next_slot(ring, slot); + if (skip > 0) + --skip; } if (ring->stopped) { B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME); -- cgit v0.10.2 From 7fc0357479eeff4ca808c4d8c09bc7631f576b8d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 25 Mar 2013 11:27:46 -0700 Subject: ath9k: avoid queueing hw check work when suspended The following issue was reported. WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]() Hardware name: iMac12,1 queueing ieee80211 work while going to suspend Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1 Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] [] warn_slowpath_common+0x7f/0xc0 [] ? ath_start_rx_poll+0x70/0x70 [ath9k] ] warn_slowpath_fmt+0x46/0x50 [] ieee80211_can_queue_work.isra.7+0x32/0x40 Fix this by avoiding to queue the work if our device has already been marked as suspended or stopped. Reported-by: Parag Warudkar Tested-by: Parag Warudkar Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 39c84ec..7fdac6c 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -170,7 +170,8 @@ void ath_rx_poll(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; - ieee80211_queue_work(sc->hw, &sc->hw_check_work); + if (!test_bit(SC_OP_INVALID, &sc->sc_flags)) + ieee80211_queue_work(sc->hw, &sc->hw_check_work); } /* -- cgit v0.10.2 From ace5af39866da7d45f43774150dace19a73716d6 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 26 Mar 2013 17:35:23 +0000 Subject: iwlegacy: 4965-rs: avoid null pointer dereference error il4965_rs_initialize_lq checks to see if sta is null, however, before that check il4965_rs_use_green dereferences sta when intializing use_green. Avoid a potential null pointer dereference error by only calling il4965_rs_use_green after we are sure sta is not null. Smatch analysis: drivers/net/wireless/iwlegacy/4965-rs.c:2160 il4965_rs_initialize_lq() warn: variable dereferenced before check 'sta' (see line 2155) Signed-off-by: Colin Ian King Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index e8324b5..6c7493c 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2152,7 +2152,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, int rate_idx; int i; u32 rate; - u8 use_green = il4965_rs_use_green(il, sta); + u8 use_green; u8 active_tbl = 0; u8 valid_tx_ant; struct il_station_priv *sta_priv; @@ -2160,6 +2160,7 @@ il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf, if (!sta || !lq_sta) return; + use_green = il4965_rs_use_green(il, sta); sta_priv = (void *)sta->drv_priv; i = lq_sta->last_txrate_idx; -- cgit v0.10.2 From 8ac3e99e693cb876776646c07f0a954a17ee3017 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 26 Mar 2013 14:40:51 -0500 Subject: libertas: drop maintainership Would be better maintained by somebody who actualy has time for it. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/MAINTAINERS b/MAINTAINERS index 9561658..92efc74 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5043,9 +5043,8 @@ S: Maintained F: drivers/net/ethernet/marvell/sk* MARVELL LIBERTAS WIRELESS DRIVER -M: Dan Williams L: libertas-dev@lists.infradead.org -S: Maintained +S: Orphan F: drivers/net/wireless/libertas/ MARVELL MV643XX ETHERNET DRIVER -- cgit v0.10.2 From 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 27 Mar 2013 08:37:08 +0100 Subject: b43: N-PHY: use more bits for offset in RSSI calibration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When calculating "offset" for final RSSI calibration we're using numbers bigger than s8 can hold. We have for example: offset[j] = 232 - poll_results[j]; formula. If poll_results[j] is small enough (it usually is) we treat number's bit as a sign bit. For example 232 - 1 becomes: 0xE8 - 0x1 = 0xE7, which is not 231 but -25. This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c and caused stability regression on some cards, for ex. BCM4322. Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index e014a7a..e8486c1 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -1564,7 +1564,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev) u16 clip_off[2] = { 0xFFFF, 0xFFFF }; u8 vcm_final = 0; - s8 offset[4]; + s32 offset[4]; s32 results[8][4] = { }; s32 results_min[4] = { }; s32 poll_results[4] = { }; @@ -1732,7 +1732,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type) u8 regs_save_radio[2]; u16 regs_save_phy[2]; - s8 offset[4]; + s32 offset[4]; u8 core; u8 rail; -- cgit v0.10.2 From 14109a59caf93e6eae726a34bf2f0897508ec8c1 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Tue, 26 Mar 2013 16:12:03 +0000 Subject: enet: fec: fix fail resume from suspend state Without this patch 1. boot with nfs (no_console_suspend) 2. echo mem >/sys/power/state 3. wakeup by wakesource 4. print "eth0: tx queue full" This fix above problem by reinit bd queue at restart function Signed-off-by: Frank Li Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 911d025..f292c3a 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -345,6 +345,53 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +/* Init RX & TX buffer descriptors + */ +static void fec_enet_bd_init(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + struct bufdesc *bdp; + unsigned int i; + + /* Initialize the receive buffer descriptors. */ + bdp = fep->rx_bd_base; + for (i = 0; i < RX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + if (bdp->cbd_bufaddr) + bdp->cbd_sc = BD_ENET_RX_EMPTY; + else + bdp->cbd_sc = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + + fep->cur_rx = fep->rx_bd_base; + + /* ...and the same for transmit */ + bdp = fep->tx_bd_base; + fep->cur_tx = bdp; + for (i = 0; i < TX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. */ + bdp->cbd_sc = 0; + if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) { + dev_kfree_skb_any(fep->tx_skbuff[i]); + fep->tx_skbuff[i] = NULL; + } + bdp->cbd_bufaddr = 0; + bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); + } + + /* Set the last buffer to wrap */ + bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + bdp->cbd_sc |= BD_SC_WRAP; + fep->dirty_tx = bdp; +} + /* This function is called to start or restart the FEC during a link * change. This only happens when switching between half and full * duplex. @@ -388,6 +435,8 @@ fec_restart(struct net_device *ndev, int duplex) /* Set maximum receive buffer size. */ writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); + fec_enet_bd_init(ndev); + /* Set receive and transmit descriptor base. */ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); if (fep->bufdesc_ex) @@ -397,7 +446,6 @@ fec_restart(struct net_device *ndev, int duplex) writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); - fep->cur_rx = fep->rx_bd_base; for (i = 0; i <= TX_RING_MOD_MASK; i++) { if (fep->tx_skbuff[i]) { @@ -1597,8 +1645,6 @@ static int fec_enet_init(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); struct bufdesc *cbd_base; - struct bufdesc *bdp; - unsigned int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, @@ -1608,6 +1654,7 @@ static int fec_enet_init(struct net_device *ndev) return -ENOMEM; } + memset(cbd_base, 0, PAGE_SIZE); spin_lock_init(&fep->hw_lock); fep->netdev = ndev; @@ -1631,35 +1678,6 @@ static int fec_enet_init(struct net_device *ndev) writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); - /* Initialize the receive buffer descriptors. */ - bdp = fep->rx_bd_base; - for (i = 0; i < RX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmit */ - bdp = fep->tx_bd_base; - fep->cur_tx = bdp; - for (i = 0; i < TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); - } - - /* Set the last buffer to wrap */ - bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); - bdp->cbd_sc |= BD_SC_WRAP; - fep->dirty_tx = bdp; - fec_restart(ndev, 0); return 0; -- cgit v0.10.2 From fcca143d696092110ae1e361866576804fe887f3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 27 Mar 2013 03:22:45 +0000 Subject: rtnetlink: fix error return code in rtnl_link_fill() Fix to return a negative error code from the error handling case instead of 0(possible overwrite to 0 by ops->fill_xstats call), as returned elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 5fb8d7e..b65441d 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -496,8 +496,10 @@ static int rtnl_link_fill(struct sk_buff *skb, const struct net_device *dev) } if (ops->fill_info) { data = nla_nest_start(skb, IFLA_INFO_DATA); - if (data == NULL) + if (data == NULL) { + err = -EMSGSIZE; goto err_cancel_link; + } err = ops->fill_info(skb, dev); if (err < 0) goto err_cancel_data; -- cgit v0.10.2 From b56d6b3fca6d1214dbc9c5655f26e5d4ec04afc8 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:41:59 +0000 Subject: drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index df32a09..80cad06 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -436,7 +436,7 @@ void cpsw_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); cpts_tx_timestamp(priv->cpts, skb); priv->stats.tx_packets++; priv->stats.tx_bytes += len; -- cgit v0.10.2 From 7e51cde276ca820d526c6c21cf8147df595a36bf Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 27 Mar 2013 04:42:00 +0000 Subject: drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index ae1b77a..72300bc 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1053,7 +1053,7 @@ static void emac_tx_handler(void *token, int len, int status) * queue is stopped then start the queue as we have free desc for tx */ if (unlikely(netif_queue_stopped(ndev))) - netif_start_queue(ndev); + netif_wake_queue(ndev); ndev->stats.tx_packets++; ndev->stats.tx_bytes += len; dev_kfree_skb_any(skb); -- cgit v0.10.2 From ea872d7712528ad991bdabb63515bc00ee10993e Mon Sep 17 00:00:00 2001 From: Sergey Popovich Date: Wed, 27 Mar 2013 05:41:59 +0000 Subject: sch: add missing u64 in psched_ratecfg_precompute() It seems that commit commit 292f1c7ff6cc10516076ceeea45ed11833bb71c7 Author: Jiri Pirko Date: Tue Feb 12 00:12:03 2013 +0000 sch: make htb_rate_cfg and functions around that generic adds little regression. Before: # tc qdisc add dev eth0 root handle 1: htb default ffff # tc class add dev eth0 classid 1:ffff htb rate 5Gbit # tc -s class show dev eth0 class htb 1:ffff root prio 0 rate 5000Mbit ceil 5000Mbit burst 625b cburst 625b Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 lended: 0 borrowed: 0 giants: 0 tokens: 31 ctokens: 31 After: # tc qdisc add dev eth0 root handle 1: htb default ffff # tc class add dev eth0 classid 1:ffff htb rate 5Gbit # tc -s class show dev eth0 class htb 1:ffff root prio 0 rate 1544Mbit ceil 1544Mbit burst 625b cburst 625b Sent 5073 bytes 41 pkt (dropped 0, overlimits 0 requeues 0) rate 1976bit 2pps backlog 0b 0p requeues 0 lended: 41 borrowed: 0 giants: 0 tokens: 1802 ctokens: 1802 This probably due to lost u64 cast of rate parameter in psched_ratecfg_precompute() (net/sched/sch_generic.c). Signed-off-by: Sergey Popovich Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index ffad481..eac7e0e 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -904,7 +904,7 @@ void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) u64 mult; int shift; - r->rate_bps = rate << 3; + r->rate_bps = (u64)rate << 3; r->shift = 0; r->mult = 1; /* -- cgit v0.10.2 From 715230a44310a8cf66fbfb5a46f9a62a9b2de424 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 27 Mar 2013 06:40:50 +0000 Subject: tg3: fix length overflow in VPD firmware parsing Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow. Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct. http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf Signed-off-by: Kees Cook Reported-by: Oded Horovitz Reported-by: Brad Spengler Cc: stable@vger.kernel.org Cc: Matt Carlson Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 67d2663..17a9727 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14604,8 +14604,11 @@ static void tg3_read_vpd(struct tg3 *tp) if (j + len > block_end) goto partno; - memcpy(tp->fw_ver, &vpd_data[j], len); - strncat(tp->fw_ver, " bc ", vpdlen - len - 1); + if (len >= sizeof(tp->fw_ver)) + len = sizeof(tp->fw_ver) - 1; + memset(tp->fw_ver, 0, sizeof(tp->fw_ver)); + snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len, + &vpd_data[j]); } partno: -- cgit v0.10.2 From 24f11a5cf538a8fcc10d61f457e9a2094fb965b4 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 27 Mar 2013 06:54:00 +0000 Subject: line up comment for ndo_bridge_getlink Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b3d00fa..8bfa956 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -895,7 +895,7 @@ struct netdev_fcoe_hbainfo { * * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh) * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, - * struct net_device *dev) + * struct net_device *dev, u32 filter_mask) * * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier); * Called to change device carrier. Soft-devices (like dummy, team, etc) -- cgit v0.10.2 From 91c5746425aed8f7188a351f1224a26aa232e4b3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 27 Mar 2013 18:28:41 +0000 Subject: aoe: reserve enough headroom on skbs Some network drivers use a non default hard_header_len Transmitted skb should take into account dev->hard_header_len, or risk crashes or expensive reallocations. In the case of aoe, lets reserve MAX_HEADER bytes. David reported a crash in defxx driver, solved by this patch. Reported-by: David Oostdyk Tested-by: David Oostdyk Signed-off-by: Eric Dumazet Cc: Ed Cashin Signed-off-by: David S. Miller diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 25ef5c0..92b6d7c 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -51,8 +51,9 @@ new_skb(ulong len) { struct sk_buff *skb; - skb = alloc_skb(len, GFP_ATOMIC); + skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC); if (skb) { + skb_reserve(skb, MAX_HEADER); skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->protocol = __constant_htons(ETH_P_AOE); -- cgit v0.10.2 From 9cfe8b156c21cf340b3a10ecb3022fbbc1c39185 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:35 +0000 Subject: sky2: Receive Overflows not counted The sky2 driver doesn't count the Receive Overflows because the MAC interrupt for this event is not set in the MAC's interrupt mask. The MAC's interrupt mask is set only for Transmit FIFO Underruns. Fix: The correct setting should be (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) Otherwise the Receive Overflow event will not generate any interrupt. The Receive Overflow interrupt is handled correctly Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index 615ac63..ec6dcd8 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2074,7 +2074,7 @@ enum { GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ -#define GMAC_DEF_MSK GM_IS_TX_FF_UR +#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) }; /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ -- cgit v0.10.2 From 74f9f42c1c1650e74fb464f76644c9041f996851 Mon Sep 17 00:00:00 2001 From: Mirko Lindner Date: Tue, 26 Mar 2013 06:38:42 +0000 Subject: sky2: Threshold for Pause Packet is set wrong The sky2 driver sets the Rx Upper Threshold for Pause Packet generation to a wrong value which leads to only 2kB of RAM remaining space. This can lead to Rx overflow errors even with activated flow-control. Fix: We should increase the value to 8192/8 Signed-off-by: Mirko Lindner Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index fc07ca3..6a0e671 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1067,7 +1067,7 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); - tp = space - 2048/8; + tp = space - 8192/8; sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); } else { -- cgit v0.10.2 From 1c4a154e5253687c51123956dfcee9e9dfa8542d Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 26 Mar 2013 08:13:34 +0000 Subject: ipv6: don't accept node local multicast traffic from the wire Erik Hugne's errata proposal (Errata ID: 3480) to RFC4291 has been verified: http://www.rfc-editor.org/errata_search.php?eid=3480 We have to check for pkt_type and loopback flag because either the packets are allowed to travel over the loopback interface (in which case pkt_type is PACKET_HOST and IFF_LOOPBACK flag is set) or they travel over a non-loopback interface back to us (in which case PACKET_TYPE is PACKET_LOOPBACK and IFF_LOOPBACK flag is not set). Cc: Erik Hugne Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index e33fe0a..2bab2aa 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -118,6 +118,18 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt ipv6_addr_loopback(&hdr->daddr)) goto err; + /* RFC4291 Errata ID: 3480 + * Interface-Local scope spans only a single interface on a + * node and is useful only for loopback transmission of + * multicast. Packets with interface-local scope received + * from another node must be discarded. + */ + if (!(skb->pkt_type == PACKET_LOOPBACK || + dev->flags & IFF_LOOPBACK) && + ipv6_addr_is_multicast(&hdr->daddr) && + IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1) + goto err; + /* RFC4291 2.7 * Nodes must not originate a packet to a multicast address whose scope * field contains the reserved value 0; if such a packet is received, it -- cgit v0.10.2 From 1bc7db16782c2a581fb4d53ca853631050f31611 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 27 Mar 2013 03:32:41 +0000 Subject: bonding: fix disabling of arp_interval and miimon Currently if either arp_interval or miimon is disabled, they both get disabled, and upon disabling they get executed once more which is not the proper behaviour. Also when doing a no-op and disabling an already disabled one, the other again gets disabled. Also fix the error messages with the proper valid ranges, and a small typo fix in the up delay error message (outputting "down delay", instead of "up delay"). Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index db103e0..ea7a388 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -527,7 +527,7 @@ static ssize_t bonding_store_arp_interval(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n", + pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n", bond->dev->name, new_value, INT_MAX); ret = -EINVAL; goto out; @@ -542,14 +542,15 @@ static ssize_t bonding_store_arp_interval(struct device *d, pr_info("%s: Setting ARP monitoring interval to %d.\n", bond->dev->name, new_value); bond->params.arp_interval = new_value; - if (bond->params.miimon) { - pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", - bond->dev->name, bond->dev->name); - bond->params.miimon = 0; - } - if (!bond->params.arp_targets[0]) { - pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", - bond->dev->name); + if (new_value) { + if (bond->params.miimon) { + pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", + bond->dev->name, bond->dev->name); + bond->params.miimon = 0; + } + if (!bond->params.arp_targets[0]) + pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", + bond->dev->name); } if (bond->dev->flags & IFF_UP) { /* If the interface is up, we may need to fire off @@ -557,10 +558,13 @@ static ssize_t bonding_store_arp_interval(struct device *d, * timer will get fired off when the open function * is called. */ - cancel_delayed_work_sync(&bond->mii_work); - queue_delayed_work(bond->wq, &bond->arp_work, 0); + if (!new_value) { + cancel_delayed_work_sync(&bond->arp_work); + } else { + cancel_delayed_work_sync(&bond->mii_work); + queue_delayed_work(bond->wq, &bond->arp_work, 0); + } } - out: rtnl_unlock(); return ret; @@ -702,7 +706,7 @@ static ssize_t bonding_store_downdelay(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -757,8 +761,8 @@ static ssize_t bonding_store_updelay(struct device *d, goto out; } if (new_value < 0) { - pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; } else { @@ -968,37 +972,37 @@ static ssize_t bonding_store_miimon(struct device *d, } if (new_value < 0) { pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n", - bond->dev->name, new_value, 1, INT_MAX); + bond->dev->name, new_value, 0, INT_MAX); ret = -EINVAL; goto out; - } else { - pr_info("%s: Setting MII monitoring interval to %d.\n", - bond->dev->name, new_value); - bond->params.miimon = new_value; - if (bond->params.updelay) - pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.updelay * bond->params.miimon); - if (bond->params.downdelay) - pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", - bond->dev->name, - bond->params.downdelay * bond->params.miimon); - if (bond->params.arp_interval) { - pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", - bond->dev->name); - bond->params.arp_interval = 0; - if (bond->params.arp_validate) { - bond->params.arp_validate = - BOND_ARP_VALIDATE_NONE; - } - } - - if (bond->dev->flags & IFF_UP) { - /* If the interface is up, we may need to fire off - * the MII timer. If the interface is down, the - * timer will get fired off when the open function - * is called. - */ + } + pr_info("%s: Setting MII monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.miimon = new_value; + if (bond->params.updelay) + pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.updelay * bond->params.miimon); + if (bond->params.downdelay) + pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.downdelay * bond->params.miimon); + if (new_value && bond->params.arp_interval) { + pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n", + bond->dev->name); + bond->params.arp_interval = 0; + if (bond->params.arp_validate) + bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; + } + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the MII timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (!new_value) { + cancel_delayed_work_sync(&bond->mii_work); + } else { cancel_delayed_work_sync(&bond->arp_work); queue_delayed_work(bond->wq, &bond->mii_work, 0); } -- cgit v0.10.2 From 50eab0503a7579ada512e4968738b7c9737cf36e Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Wed, 27 Mar 2013 23:42:41 +0000 Subject: net: fix the use of this_cpu_ptr flush_tasklet is not percpu var, and percpu is percpu var, and this_cpu_ptr(&info->cache->percpu->flush_tasklet) is not equal to &this_cpu_ptr(info->cache->percpu)->flush_tasklet 1f743b076(use this_cpu_ptr per-cpu helper) introduced this bug. Signed-off-by: Li RongQing Signed-off-by: David S. Miller diff --git a/net/core/flow.c b/net/core/flow.c index c56ea6f..2bfd081 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -328,7 +328,7 @@ static void flow_cache_flush_per_cpu(void *data) struct flow_flush_info *info = data; struct tasklet_struct *tasklet; - tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet); + tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet; tasklet->data = (unsigned long)info; tasklet_schedule(tasklet); } -- cgit v0.10.2 From 4c51e53689569398d656e631c17308d9b8e84650 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 28 Mar 2013 02:34:41 +0000 Subject: smsc75xx: fix jumbo frame support This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 9abe517..1a15ec1 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -914,8 +914,12 @@ static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) { struct usbnet *dev = netdev_priv(netdev); + int ret; + + if (new_mtu > MAX_SINGLE_PACKET_SIZE) + return -EINVAL; - int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); + ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set mac rx frame length\n"); return ret; @@ -1324,7 +1328,7 @@ static int smsc75xx_reset(struct usbnet *dev) netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf); - ret = smsc75xx_set_rx_max_frame_length(dev, 1514); + ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN); if (ret < 0) { netdev_warn(dev->net, "Failed to set max rx frame length\n"); return ret; @@ -2134,8 +2138,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) dev->net->stats.rx_frame_errors++; } else { - /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ - if (unlikely(size > (ETH_FRAME_LEN + 12))) { + /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */ + if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) { netif_dbg(dev, rx_err, dev->net, "size err rx_cmd_a=0x%08x\n", rx_cmd_a); -- cgit v0.10.2 From a561cf7edf9863198bfccecfc5cfe26d951ebd20 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 27 Mar 2013 23:13:26 +0000 Subject: net: core: Remove redundant call to 'nf_reset' in 'dev_forward_skb' 'nf_reset' is called just prior calling 'netif_rx'. No need to call it twice. Reported-by: Igor Michailov Signed-off-by: Shmulik Ladkani Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index b13e5c7..6591440 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1624,7 +1624,6 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) } skb_orphan(skb); - nf_reset(skb); if (unlikely(!is_skb_forwardable(dev, skb))) { atomic_long_inc(&dev->rx_dropped); -- cgit v0.10.2 From dc574f1d52d893f516f3786ff7635450bac00eef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:44 +0000 Subject: net: calxedaxgmac: fix rx ring handling when OOM If skb allocation for the rx ring fails repeatedly, we can reach a point were the ring is empty. In this condition, the driver is out of sync with the h/w. While this has always been possible, the removal of the skb recycling seems to have made triggering this problem easier. Signed-off-by: Rob Herring Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index a170065..bb1e80b 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1141,6 +1141,9 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit) struct sk_buff *skb; int frame_len; + if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ)) + break; + entry = priv->rx_tail; p = priv->dma_rx + entry; if (desc_get_owner(p)) -- cgit v0.10.2 From e6c3827dcfe53dd78b824d2ee4007a216ada739e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 28 Mar 2013 11:32:45 +0000 Subject: net: calxedaxgmac: Wake-on-LAN fixes WOL is broken because the magic packet status bit is getting set rather than the enable bit. The PMT interrupt is not getting serviced because the PMT interrupt is also enabled on the global interrupt, but not cleared by the global interrupt and the global interrupt is higher priority. This fixes both of these issues to get WOL working. There's still a problem with receive after resume, but at least now we can wake-up. Signed-off-by: Rob Herring Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index bb1e80b..b0ebc9f 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -163,6 +163,7 @@ #define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ /* XGMAC_INT_STAT reg */ +#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */ #define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */ #define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */ @@ -960,6 +961,9 @@ static int xgmac_hw_init(struct net_device *dev) writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS); writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA); + /* Mask power mgt interrupt */ + writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT); + /* XGMAC requires AXI bus init. This is a 'magic number' for now */ writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS); @@ -1828,7 +1832,7 @@ static void xgmac_pmt(void __iomem *ioaddr, unsigned long mode) unsigned int pmt = 0; if (mode & WAKE_MAGIC) - pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT; + pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN; if (mode & WAKE_UCAST) pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST; -- cgit v0.10.2 From cd68ddd4c29ab523440299f24ff2417fe7a0dca6 Mon Sep 17 00:00:00 2001 From: Vijay Subramanian Date: Thu, 28 Mar 2013 13:52:00 +0000 Subject: net: fq_codel: Fix off-by-one error Currently, we hold a max of sch->limit -1 number of packets instead of sch->limit packets. Fix this off-by-one error. Signed-off-by: Vijay Subramanian Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 4e606fc..5578628 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -195,7 +195,7 @@ static int fq_codel_enqueue(struct sk_buff *skb, struct Qdisc *sch) flow->deficit = q->quantum; flow->dropped = 0; } - if (++sch->q.qlen < sch->limit) + if (++sch->q.qlen <= sch->limit) return NET_XMIT_SUCCESS; q->drop_overlimit++; -- cgit v0.10.2 From 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Thu, 28 Mar 2013 18:10:50 +0000 Subject: atl1e: drop pci-msi support because of packet corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by: rebelyouth Cc: Huang, Xiong Tested-by: Christian Sünkenberg Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index 829b5ad..edfdf6b 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -438,7 +438,6 @@ struct atl1e_adapter { struct atl1e_hw hw; struct atl1e_hw_stats hw_stats; - bool have_msi; u32 wol; u16 link_speed; u16 link_duplex; diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 92f4734..f73d560 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -1849,34 +1849,19 @@ static void atl1e_free_irq(struct atl1e_adapter *adapter) struct net_device *netdev = adapter->netdev; free_irq(adapter->pdev->irq, netdev); - - if (adapter->have_msi) - pci_disable_msi(adapter->pdev); } static int atl1e_request_irq(struct atl1e_adapter *adapter) { struct pci_dev *pdev = adapter->pdev; struct net_device *netdev = adapter->netdev; - int flags = 0; int err = 0; - adapter->have_msi = true; - err = pci_enable_msi(pdev); - if (err) { - netdev_dbg(netdev, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = false; - } - - if (!adapter->have_msi) - flags |= IRQF_SHARED; - err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev); + err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name, + netdev); if (err) { netdev_dbg(adapter->netdev, "Unable to allocate interrupt Error: %d\n", err); - if (adapter->have_msi) - pci_disable_msi(pdev); return err; } netdev_dbg(netdev, "atl1e_request_irq OK\n"); -- cgit v0.10.2 From 8622315e0142eba78ec0a8075b5a6fd481a059a4 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 28 Mar 2013 23:54:08 +0000 Subject: MAINTAINERS: Update netxen_nic maintainers list o Add myself to netxen_nic maintainers list Signed-off-by: Manish Chopra Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 457ff5c..6e6d606 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5562,6 +5562,7 @@ F: include/uapi/linux/if_* F: include/uapi/linux/netdevice.h NETXEN (1/10) GbE SUPPORT +M: Manish Chopra M: Sony Chacko M: Rajesh Borundia L: netdev@vger.kernel.org -- cgit v0.10.2 From 00cfec37484761a44a3b6f4675a54caa618210ae Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Mar 2013 03:01:22 +0000 Subject: net: add a synchronize_net() in netdev_rx_handler_unregister() commit 35d48903e97819 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis : I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline. In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do. But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here: slave = bond_slave_get_rcu(skb->dev); bond = slave->bond; <--- BUG the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference. Looking at the code that unregisters the handler: void netdev_rx_handler_unregister(struct net_device *dev) { ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } Which is basically: dev->rx_handler = NULL; dev->rx_handler_data = NULL; And looking at __netif_receive_skb() we have: rx_handler = rcu_dereference(skb->dev->rx_handler); if (rx_handler) { if (pt_prev) { ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = NULL; } switch (rx_handler(&skb)) { My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this: CPU0 CPU1 ---- ---- rx_handler = skb->dev->rx_handler netdev_rx_handler_unregister() { dev->rx_handler = NULL; dev->rx_handler_data = NULL; rx_handler() bond_handle_frame() { slave = skb->dev->rx_handler; bond = slave->bond; <-- NULL pointer dereference!!! What protection am I missing in the bond release handler that would prevent the above from happening? We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL. A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data. The second way is better as it avoids an extra test in fast path. Reported-by: Steven Rostedt Signed-off-by: Eric Dumazet Cc: Jiri Pirko Cc: Paul E. McKenney Acked-by: Steven Rostedt Reviewed-by: Paul E. McKenney Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 6591440..13e6447 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3313,6 +3313,7 @@ int netdev_rx_handler_register(struct net_device *dev, if (dev->rx_handler) return -EBUSY; + /* Note: rx_handler_data must be set before rx_handler */ rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); rcu_assign_pointer(dev->rx_handler, rx_handler); @@ -3333,6 +3334,11 @@ void netdev_rx_handler_unregister(struct net_device *dev) ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); + /* a reader seeing a non NULL rx_handler in a rcu_read_lock() + * section has a guarantee to see a non NULL rx_handler_data + * as well. + */ + synchronize_net(); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister); -- cgit v0.10.2 From 14bc435ea54cb888409efb54fc6b76c13ef530e9 Mon Sep 17 00:00:00 2001 From: "Max.Nekludov@us.elster.com" Date: Fri, 29 Mar 2013 05:27:36 +0000 Subject: ks8851: Fix interpretation of rxlen field. According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: Max Nekludov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 33bcb63..8fb4812 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -528,7 +528,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) for (; rxfc != 0; rxfc--) { rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; - rxlen = rxh >> 16; + rxlen = (rxh >> 16) & 0xfff; netif_dbg(ks, rx_status, ks->netdev, "rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen); -- cgit v0.10.2 From 1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:50:07 +0000 Subject: sh_eth: fix handling of no LINK signal The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bf5e3cf..1ca8b2b 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1216,10 +1216,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) if (felic_stat & ECSR_LCHNG) { /* Link Changed */ if (mdp->cd->no_psr || mdp->no_ether_link) { - if (mdp->link == PHY_DOWN) - link_stat = 0; - else - link_stat = PHY_ST_LINK; + goto ignore_link; } else { link_stat = (sh_eth_read(ndev, PSR)); if (mdp->ether_link_active_low) @@ -1242,6 +1239,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) } } +ignore_link: if (intr_status & EESR_TWB) { /* Write buck end. unused write back interrupt */ if (intr_status & EESR_TABT) /* Transmit Abort int */ @@ -1392,12 +1390,16 @@ static void sh_eth_adjust_link(struct net_device *ndev) (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_enable(ndev); } } else if (mdp->link) { new_state = 1; mdp->link = PHY_DOWN; mdp->speed = 0; mdp->duplex = -1; + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_disable(ndev); } if (new_state && netif_msg_link(mdp)) -- cgit v0.10.2 From 3893b27345ac0ff13c1b9ec20ad50966b810997e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 09:54:20 +0000 Subject: sh_eth: workaround for spurious ECI interrupt At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov Reviewed-by: Max Filippov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1ca8b2b..44f7904 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1324,12 +1324,18 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_cpu_data *cd = mdp->cd; irqreturn_t ret = IRQ_NONE; - u32 intr_status = 0; + unsigned long intr_status; spin_lock(&mdp->lock); - /* Get interrpt stat */ + /* Get interrupt status */ intr_status = sh_eth_read(ndev, EESR); + /* Mask it with the interrupt mask, forcing ECI interrupt to be always + * enabled since it's the one that comes thru regardless of the mask, + * and we need to fully handle it in sh_eth_error() in order to quench + * it as it doesn't get cleared by just writing 1 to the ECI bit... + */ + intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI; /* Clear interrupt */ if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF | EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF | -- cgit v0.10.2 From 3340d2aae3433ad9147f6bf0adc452b324e31591 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 31 Mar 2013 10:11:04 +0000 Subject: sh_eth: make 'link' field of 'struct sh_eth_private' *int* The 'link' field of 'struct sh_eth_private' has type 'enum phy_state' while the 'link' field of 'struct phy_device' is merely *int* (having values 0 and 1) and the former field gets assigned from the latter. Make the field match, getting rid of incorrectly used PHY_DOWN value in assignments/comparisons. Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 44f7904..6ed333f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1377,7 +1377,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) struct phy_device *phydev = mdp->phydev; int new_state = 0; - if (phydev->link != PHY_DOWN) { + if (phydev->link) { if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; @@ -1391,7 +1391,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (mdp->cd->set_rate) mdp->cd->set_rate(ndev); } - if (mdp->link == PHY_DOWN) { + if (!mdp->link) { sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; @@ -1401,7 +1401,7 @@ static void sh_eth_adjust_link(struct net_device *ndev) } } else if (mdp->link) { new_state = 1; - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; if (mdp->cd->no_psr || mdp->no_ether_link) @@ -1422,7 +1422,7 @@ static int sh_eth_phy_init(struct net_device *ndev) snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, mdp->mii_bus->id , mdp->phy_id); - mdp->link = PHY_DOWN; + mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index e665567..828be45 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -723,7 +723,7 @@ struct sh_eth_private { u32 phy_id; /* PHY ID */ struct mii_bus *mii_bus; /* MDIO bus control */ struct phy_device *phydev; /* PHY device control */ - enum phy_state link; + int link; phy_interface_t phy_interface; int msg_enable; int speed; -- cgit v0.10.2 From 6741f40d198c6a5feb23653a1efd4ca47f93d83d Mon Sep 17 00:00:00 2001 From: Joseph CHANG Date: Thu, 28 Mar 2013 23:13:42 +0000 Subject: DM9000B: driver initialization upgrade Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 8cdf025..9eada8e 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count) tmp = readl(reg); } +/* + * Sleep, either by using msleep() or if we are suspending, then + * use mdelay() to sleep. + */ +static void dm9000_msleep(board_info_t *db, unsigned int ms) +{ + if (db->in_suspend) + mdelay(ms); + else + msleep(ms); +} + +/* Read a word from phyxcer */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_save; + int ret; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Issue phyxcer read command */ + iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait read complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); + + dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); + return ret; +} + +/* Write a word to phyxcer */ +static void +dm9000_phy_write(struct net_device *dev, + int phyaddr_unused, int reg, int value) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned long reg_save; + + dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, value); + iow(db, DM9000_EPDRH, value >> 8); + + /* Issue phyxcer write command */ + iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait write complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + mutex_unlock(&db->addr_lock); +} + /* dm9000_set_io * * select the specified set of io routines to use with the @@ -795,6 +896,9 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; /* if wol is needed, then always set NCR_WAKEEN otherwise we end @@ -1201,109 +1305,6 @@ dm9000_open(struct net_device *dev) return 0; } -/* - * Sleep, either by using msleep() or if we are suspending, then - * use mdelay() to sleep. - */ -static void dm9000_msleep(board_info_t *db, unsigned int ms) -{ - if (db->in_suspend) - mdelay(ms); - else - msleep(ms); -} - -/* - * Read a word from phyxcer - */ -static int -dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned int reg_save; - int ret; - - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - dm9000_msleep(db, 1); /* Wait read complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ - - /* The read data keeps on REG_0D & REG_0E */ - ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - mutex_unlock(&db->addr_lock); - - dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); - return ret; -} - -/* - * Write a word to phyxcer - */ -static void -dm9000_phy_write(struct net_device *dev, - int phyaddr_unused, int reg, int value) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned long reg_save; - - dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - /* Fill the written data into REG_0D & REG_0E */ - iow(db, DM9000_EPDRL, value); - iow(db, DM9000_EPDRH, value >> 8); - - iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock, flags); - - dm9000_msleep(db, 1); /* Wait write complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - - spin_unlock_irqrestore(&db->lock, flags); - mutex_unlock(&db->addr_lock); -} - static void dm9000_shutdown(struct net_device *dev) { @@ -1502,7 +1503,12 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - dm9000_reset(db); + /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), + * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo + * while probe stage. + */ + + iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h index 55688bd..9ce058a 100644 --- a/drivers/net/ethernet/davicom/dm9000.h +++ b/drivers/net/ethernet/davicom/dm9000.h @@ -69,7 +69,9 @@ #define NCR_WAKEEN (1<<6) #define NCR_FCOL (1<<4) #define NCR_FDX (1<<3) -#define NCR_LBK (3<<1) + +#define NCR_RESERVED (3<<1) +#define NCR_MAC_LBK (1<<1) #define NCR_RST (1<<0) #define NSR_SPEED (1<<7) @@ -167,5 +169,12 @@ #define ISR_LNKCHNG (1<<5) #define ISR_UNDERRUN (1<<4) +/* Davicom MII registers. + */ + +#define MII_DM_DSPCR 0x1b /* DSP Control Register */ + +#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */ + #endif /* _DM9000X_H_ */ -- cgit v0.10.2