From 4a4b2d7684c66dbd8ed04eb284bc94a78e061d29 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 2 Jun 2009 14:47:50 +0200 Subject: cciss: factor out core of sendcmd() for a more sane interface Factor out the core of sendcmd() to provide a simpler interface which exposes all the error information to the caller and make the original sendcmd use this new function. Rationale: The SCSI error handling routines need to send commands with interrupts turned off, but they also need access to the full error information. Signed-off-by: Stephen M. Cameron Cc: Mike Miller Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 94474f5..8d0f893 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2373,41 +2373,21 @@ static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) return 0; } -/* - * Send a command to the controller, and wait for it to complete. - * Only used at init time. +/* Send command c to controller h and poll for it to complete. + * Turns interrupts off on the board. Used at driver init time + * and during SCSI error recovery. */ -static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, - __u8 page_code, unsigned char *scsi3addr, int cmd_type) +static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c) { - CommandList_struct *c; int i; unsigned long complete; - ctlr_info_t *info_p = hba[ctlr]; + int status = IO_ERROR; u64bit buff_dma_handle; - int status, done = 0; - if ((c = cmd_alloc(info_p, 1)) == NULL) { - printk(KERN_WARNING "cciss: unable to get memory"); - return IO_ERROR; - } - status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, scsi3addr, cmd_type); - if (status != IO_OK) { - cmd_free(info_p, c, 1); - return status; - } - resend_cmd1: - /* - * Disable interrupt - */ -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: turning intr off\n"); -#endif /* CCISS_DEBUG */ - info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF); +resend_cmd1: + + /* Disable interrupt on the board. */ + h->access.set_intr_mask(h, CCISS_INTR_OFF); /* Make sure there is room in the command FIFO */ /* Actually it should be completely empty at this time */ @@ -2415,21 +2395,15 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use /* tape side of the driver. */ for (i = 200000; i > 0; i--) { /* if fifo isn't full go */ - if (!(info_p->access.fifo_full(info_p))) { - + if (!(h->access.fifo_full(h))) break; - } udelay(10); printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," - " waiting!\n", ctlr); + " waiting!\n", h->ctlr); } - /* - * Send the cmd - */ - info_p->access.submit_command(info_p, c); - done = 0; + h->access.submit_command(h, c); /* Send the cmd */ do { - complete = pollcomplete(ctlr); + complete = pollcomplete(h->ctlr); #ifdef CCISS_DEBUG printk(KERN_DEBUG "cciss: command completed\n"); @@ -2438,97 +2412,116 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use if (complete == 1) { printk(KERN_WARNING "cciss cciss%d: SendCmd Timeout out, " - "No command list address returned!\n", ctlr); + "No command list address returned!\n", h->ctlr); status = IO_ERROR; - done = 1; break; } - /* This will need to change for direct lookup completions */ - if ((complete & CISS_ERROR_BIT) - && (complete & ~CISS_ERROR_BIT) == c->busaddr) { - /* if data overrun or underun on Report command - ignore it - */ - if (((c->Request.CDB[0] == CISS_REPORT_LOG) || - (c->Request.CDB[0] == CISS_REPORT_PHYS) || - (c->Request.CDB[0] == CISS_INQUIRY)) && - ((c->err_info->CommandStatus == - CMD_DATA_OVERRUN) || - (c->err_info->CommandStatus == CMD_DATA_UNDERRUN) - )) { - complete = c->busaddr; - } else { - if (c->err_info->CommandStatus == - CMD_UNSOLICITED_ABORT) { - printk(KERN_WARNING "cciss%d: " - "unsolicited abort %p\n", - ctlr, c); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying %p\n", - ctlr, c); - c->retry_count++; - /* erase the old error */ - /* information */ - memset(c->err_info, 0, - sizeof - (ErrorInfo_struct)); - goto resend_cmd1; - } else { - printk(KERN_WARNING - "cciss%d: retried %p too " - "many times\n", ctlr, c); - status = IO_ERROR; - goto cleanup1; - } - } else if (c->err_info->CommandStatus == - CMD_UNABORTABLE) { - printk(KERN_WARNING - "cciss%d: command could not be aborted.\n", - ctlr); - status = IO_ERROR; - goto cleanup1; - } - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " Error %x \n", ctlr, - c->err_info->CommandStatus); - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " offensive info\n" - " size %x\n num %x value %x\n", - ctlr, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_size, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_num, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_value); - status = IO_ERROR; - goto cleanup1; - } + /* If it's not the cmd we're looking for, save it for later */ + if ((complete & ~CISS_ERROR_BIT) != c->busaddr) { + if (add_sendcmd_reject(c->Request.CDB[0], + h->ctlr, complete) != 0) + BUG(); /* we are hosed if we get here. */ + continue; + } + + /* It is our command. If no error, we're done. */ + if (!(complete & CISS_ERROR_BIT)) { + status = IO_OK; + break; + } + + /* There is an error... */ + + /* if data overrun or underun on Report command ignore it */ + if (((c->Request.CDB[0] == CISS_REPORT_LOG) || + (c->Request.CDB[0] == CISS_REPORT_PHYS) || + (c->Request.CDB[0] == CISS_INQUIRY)) && + ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) || + (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) { + complete = c->busaddr; + status = IO_OK; + break; } - /* This will need changing for direct lookup completions */ - if (complete != c->busaddr) { - if (add_sendcmd_reject(cmd, ctlr, complete) != 0) { - BUG(); /* we are pretty much hosed if we get here. */ + + if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) { + printk(KERN_WARNING "cciss%d: unsolicited abort %p\n", + h->ctlr, c); + if (c->retry_count < MAX_CMD_RETRIES) { + printk(KERN_WARNING "cciss%d: retrying %p\n", + h->ctlr, c); + c->retry_count++; + /* erase the old error information */ + memset(c->err_info, 0, sizeof(c->err_info)); + goto resend_cmd1; } - continue; - } else - done = 1; - } while (!done); + printk(KERN_WARNING "cciss%d: retried %p too many " + "times\n", h->ctlr, c); + status = IO_ERROR; + goto cleanup1; + } + + if (c->err_info->CommandStatus == CMD_UNABORTABLE) { + printk(KERN_WARNING "cciss%d: command could not be " + "aborted.\n", h->ctlr); + status = IO_ERROR; + goto cleanup1; + } + + printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr); + printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n", + c->Request.CDB[0], c->err_info->CommandStatus); + if (c->err_info->CommandStatus == CMD_TARGET_STATUS) { + printk(KERN_WARNING "Target status = 0x%02x\n", + c->err_info->ScsiStatus); + if (c->err_info->ScsiStatus == 2) /* chk cond */ + printk(KERN_WARNING "Sense key = 0x%02x\n", + 0xf & c->err_info->SenseInfo[2]); + } + + status = IO_ERROR; + goto cleanup1; + + } while (1); - cleanup1: +cleanup1: /* unlock the data buffer from DMA */ buff_dma_handle.val32.lower = c->SG[0].Addr.lower; buff_dma_handle.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val, + pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); #ifdef CONFIG_CISS_SCSI_TAPE /* if we saved some commands for later, process them now. */ - if (info_p->scsi_rejects.ncompletions > 0) - do_cciss_intr(0, info_p); + if (h->scsi_rejects.ncompletions > 0) + do_cciss_intr(0, h); #endif - cmd_free(info_p, c, 1); + return status; +} + +/* + * Send a command to the controller, and wait for it to complete. + * Used at init time, and during SCSI error recovery. + */ +static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, + unsigned int use_unit_num,/* 0: address the controller, + 1: address logical volume log_unit, + 2: periph device address is scsi3addr */ + unsigned int log_unit, + __u8 page_code, unsigned char *scsi3addr, int cmd_type) +{ + CommandList_struct *c; + int status; + + c = cmd_alloc(hba[ctlr], 1); + if (!c) { + printk(KERN_WARNING "cciss: unable to get memory"); + return IO_ERROR; + } + status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, + log_unit, page_code, scsi3addr, cmd_type); + if (status == IO_OK) + status = sendcmd_core(hba[ctlr], c); + cmd_free(hba[ctlr], c, 1); return status; } -- cgit v0.10.2