From 6a0bfff44e4aa4ee1721b3daa004d2039576c70d Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 27 Oct 2008 12:18:36 +0800 Subject: Blackfin arch: handle case of d_path() returning error in decode_address() d_path() can return an error. Most of its callers do something or other to make up something sane in that case. Do similar for blackfin's decode_address() call to d_path(). Signed-off-by: Tim Pepper Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 1aa2c78..0003616 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -147,9 +147,12 @@ static void decode_address(char *buf, unsigned long address) char *name = p->comm; struct file *file = vma->vm_file; - if (file) - name = d_path(&file->f_path, _tmpbuf, + if (file) { + char *d_name = d_path(&file->f_path, _tmpbuf, sizeof(_tmpbuf)); + if (!IS_ERR(d_name)) + name = d_name; + } /* FLAT does not have its text aligned to the start of * the map while FDPIC ELF does ... -- cgit v0.10.2 From 6776cf4476833df0f1e96bd9dba18c1ea4f582d5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 27 Oct 2008 18:12:53 +0800 Subject: Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch only if the cplb block overlapped with kernel area, this cplb need be locked Signed-off-by: Graf Yang Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 512f8c9..2debc90 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -188,10 +188,11 @@ static struct cplb_desc cplb_data[] = { static u16 __init lock_kernel_check(u32 start, u32 end) { - if ((end <= (u32) _end && end >= (u32)_stext) || - (start <= (u32) _end && start >= (u32)_stext)) - return IN_KERNEL; - return 0; + if (start >= (u32)_end || end <= (u32)_stext) + return 0; + + /* This cplb block overlapped with kernel area. */ + return IN_KERNEL; } static unsigned short __init -- cgit v0.10.2 From 3b1f26a50a2bfbd2825345b49b1d7f78432a7a4c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Oct 2008 18:21:43 +0800 Subject: Blackfin arch: don't copy bss when copying L1 when copying L1 regions, go to the start of bss rather than end since we have code to zero it out already Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 56dcb0a..7729566 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -101,7 +101,7 @@ extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], _ebss_l2[], _l2_lma_start[]; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 7f35d10..8337dc3 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -119,23 +119,23 @@ void __init bfin_relocate_l1_mem(void) /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); - l1_data_a_length = _ebss_l1 - _sdata_l1; + l1_data_a_length = _sbss_l1 - _sdata_l1; if (l1_data_a_length > L1_DATA_A_LENGTH) panic("L1 Data SRAM Bank A Overflow\n"); - /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ + /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); - l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; + l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; if (l1_data_b_length > L1_DATA_B_LENGTH) panic("L1 Data SRAM Bank B Overflow\n"); - /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ + /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); if (L2_LENGTH != 0) { - l2_length = _ebss_l2 - _stext_l2; + l2_length = _sbss_l2 - _stext_l2; if (l2_length > L2_LENGTH) panic("L2 SRAM Overflow\n"); -- cgit v0.10.2 From a8b56f296d7d977fea2512e353a131f8da490aa5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 27 Oct 2008 15:31:25 -0700 Subject: IB/ipath: Fix RDMA write with immediate copy of last packet When the last packet of a RDMA write with immediate is received, the next receive work queue entry ID should be used to generate a completion entry. The code was incorrectly resetting part of the state used to copy the last packet. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index fc0f6d9..2296832 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -156,7 +156,7 @@ bail: /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP - * @wr_id_only: update wr_id only, not SGEs + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge * * Return 0 if no RWQE is available, otherwise return 1. * @@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) u32 tail; int ret; - qp->r_sge.sg_list = qp->r_sg_list; - if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; @@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; - } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len, - &qp->r_sge)); + if (wr_id_only) + break; + qp->r_sge.sg_list = qp->r_sg_list; + } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; -- cgit v0.10.2 From 4ee1c45337e7b529eed644c6f62399d797dcbc10 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 28 Oct 2008 11:36:11 +0800 Subject: Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE Signed-off-by: Robin Getz Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 0003616..bef025b 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -59,7 +59,7 @@ #endif -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE #define verbose_printk(fmt, arg...) \ printk(fmt, ##arg) #else @@ -574,7 +574,7 @@ asmlinkage void trap_c(struct pt_regs *fp) #endif panic("Kernel exception"); } else { -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE unsigned long *stack; /* Dump the user space stack */ stack = (unsigned long *)rdusp(); -- cgit v0.10.2 From 2830c9fb8e66cee70b8bffdfb0de01c144c7e643 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Fri, 24 Oct 2008 11:00:35 -0700 Subject: i7300_idle: Kconfig, show menu only on x86_64 ...since today it contains only a single driver which is visible to just x86_64 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index 108264d..f15e90a 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -1,5 +1,6 @@ menu "Memory power savings" +depends on X86_64 config I7300_IDLE_IOAT_CHANNEL bool @@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL config I7300_IDLE tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 && EXPERIMENTAL + depends on EXPERIMENTAL help Enable memory power savings when idle with certain Intel server chipsets. The chipset must have I/O AT support, such as the -- cgit v0.10.2 From 39e96c8835c36b6867b4e18698b06746972cdfcc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - dmacopy test case fail on all platform The cache code I added flushes 1 line too little if the start address is not aligned to the cache size. Cache align the start address so that when we straddle cache aligns, we get the right count. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index db53218..d6780b4 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -25,9 +25,13 @@ */ .macro do_flush flushins:req optflushins optnopins label + R2 = -L1_CACHE_BYTES; + + /* start = (start & -L1_CACHE_BYTES) */ + R0 = R0 & R2; + /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */ R1 += -1; - R2 = -L1_CACHE_BYTES; R1 = R1 & R2; R1 += L1_CACHE_BYTES; -- cgit v0.10.2 From 7f6b2e7b1ff70bc60cedc9a00b01c1fad5c21371 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 12:29:26 +0800 Subject: Blackfin arch: fix bug - kernel build with write back policy fails to be booted up Make sure IFLUSH is not the last instruction in the hardware loop to avoid infinite core stall. The dcache/icache function that only gets used in writeback mode was putting IFLUSH as the last instruction in the hardware loop ... we know from design that this may often lead to inifite core stalling, so switch the FLUSH/IFLUSH order. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index d6780b4..a028e94 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -67,7 +67,7 @@ ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) - do_flush IFLUSH, FLUSH + do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) /* Throw away all D-cached data in specified region without any obligation to -- cgit v0.10.2 From bd2b064ecd5504a9e9eeaa5742b9f8bcc6d27637 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 16 Oct 2008 17:29:10 -0400 Subject: sony-laptop: Ignore missing _DIS method on pic device At least the Vaio VGN-Z540N doesn't have this method, so let's not fail to suspend just because it doesn't exist. Signed-off-by: Adam Jackson Acked-by: Mattia Dongili Signed-off-by: Len Brown diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 5a97d3a..f483c42 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -2315,8 +2315,10 @@ end: */ static int sony_pic_disable(struct acpi_device *device) { - if (ACPI_FAILURE(acpi_evaluate_object(device->handle, - "_DIS", NULL, NULL))) + acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL, + NULL); + + if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND) return -ENXIO; dprintk("Device disabled\n"); -- cgit v0.10.2 From b1b57fbe9bb10d94682a975456de7a727d1dbc84 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:04:53 +0800 Subject: ACPI: fix de-reference bug in power resource driver change state to *state in the function of acpi_power_get_state() Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e5..30d4a52 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -153,7 +153,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - acpi_ut_get_node_name(handle), state ? "on" : "off")); + acpi_ut_get_node_name(handle), + *state ? "on" : "off")); return 0; } -- cgit v0.10.2 From 676962dac6e267ce7c13f73962208f9124a084bb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:05:39 +0800 Subject: ACPI: fan: Delete the strict check in power transition On some laptops the Fan device is turned on/off by controlling the corresponding power resource. For example: If the power resource defined in _PR0 object is turned off, it indicates that the FAN device is in off state(the ACPI state is in D3 state). Maybe the device is already in D3 state and expected to be transited to D3 state. As there is no _PR3 object, the power transition can't be finished and it will be switched to the Unknown state. Maybe it is more reasonable that the strick check in power transistion is deleted. http://bugzilla.kernel.org/show_bug.cgi?id=9485 Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 30d4a52..89111cd 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -517,11 +517,6 @@ int acpi_power_transition(struct acpi_device *device, int state) cl = &device->power.states[device->power.state].resources; tl = &device->power.states[state].resources; - if (!cl->count && !tl->count) { - result = -ENODEV; - goto end; - } - /* TBD: Resources must be ordered. */ /* -- cgit v0.10.2 From ed206fac87d65917280b6c3edd3f01125d4095c9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Oct 2008 14:01:02 -0700 Subject: ACPI: bugfix reporting of event handler status Introduce a new flag showing whether the event has an event handler/method. For all the GPEs and Fixed Events, 1. ACPI_EVENT_FLAG_HANDLE is cleared, it's an "invalid" ACPI event. 2. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_DISABLE are set, it's "disabled". 3. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_ENABLE are set, it's "enabled". 4. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_WAKE_ENABLE are set, it's "wake_enabled". Among other things, this prevents incorrect reporting of ACPI events as being "invalid" when it's really just (temporarily) "disabled". Signed-off-by: Zhang Rui Signed-off-by: David Brownell Signed-off-by: Len Brown diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index f27be7d..e8ffc70 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -89,7 +89,7 @@ Description: error - an interrupt that can't be accounted for above. - invalid: it's either a wakeup GPE or a GPE/Fixed Event that + invalid: it's either a GPE or a Fixed Event that doesn't have an event handler. disable: the GPE/Fixed Event is valid but disabled. @@ -117,30 +117,30 @@ Description: and other user space applications so that the machine won't shutdown when pressing the power button. # cat ff_pwr_btn - 0 + 0 enabled # press the power button for 3 times; # cat ff_pwr_btn - 3 + 3 enabled # echo disable > ff_pwr_btn # cat ff_pwr_btn - disable + 3 disabled # press the power button for 3 times; # cat ff_pwr_btn - disable + 3 disabled # echo enable > ff_pwr_btn # cat ff_pwr_btn - 4 + 4 enabled /* * this is because the status bit is set even if the enable bit is cleared, * and it triggers an ACPI fixed event when the enable bit is set again */ # press the power button for 3 times; # cat ff_pwr_btn - 7 + 7 enabled # echo disable > ff_pwr_btn # press the power button for 3 times; # echo clear > ff_pwr_btn /* clear the status bit */ # echo disable > ff_pwr_btn # cat ff_pwr_btn - 7 + 7 enabled diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6b..211e93a 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -521,6 +521,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) if (value) *event_status |= ACPI_EVENT_FLAG_SET; + if (acpi_gbl_fixed_event_handlers[event].handler) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + return_ACPI_STATUS(status); } @@ -571,6 +574,9 @@ acpi_get_gpe_status(acpi_handle gpe_device, status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171..6d348dc 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -167,7 +167,6 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -#define ACPI_EVENT_VALID 0x01 struct event_counter { u32 count; u32 flags; @@ -312,12 +311,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); - /* - * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, - * check the status at runtime and mark it as valid once it's enabled - */ - if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) - all_counters[index].flags |= ACPI_EVENT_VALID; end: return result; } @@ -346,12 +339,14 @@ static ssize_t counter_show(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) - size += sprintf(buf + size, " invalid"); + if (!(status & ACPI_EVENT_FLAG_HANDLE)) + size += sprintf(buf + size, " invalid"); else if (status & ACPI_EVENT_FLAG_ENABLED) - size += sprintf(buf + size, " enable"); + size += sprintf(buf + size, " enabled"); + else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED) + size += sprintf(buf + size, " wake_enabled"); else - size += sprintf(buf + size, " disable"); + size += sprintf(buf + size, " disabled"); end: size += sprintf(buf + size, "\n"); @@ -385,7 +380,7 @@ static ssize_t counter_set(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + if (!(status & ACPI_EVENT_FLAG_HANDLE)) { printk(KERN_WARNING PREFIX "Can not change Invalid GPE/Fixed Event status\n"); return -EINVAL; diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index e8936ab..7220361 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -525,6 +525,7 @@ typedef u32 acpi_event_status; #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 +#define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 /* * General Purpose Events (GPE) -- cgit v0.10.2 From da986b9ffff79224417b69cf43506192bd9c29dc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 13:58:15 +0800 Subject: Blackfin arch: dont warn when running a kernel on the oldest supported silicon Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8337dc3..71a9a8c 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -827,7 +827,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", bfin_compiled_revid(), bfin_revid()); } - if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) + if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", CPU, bfin_revid()); } -- cgit v0.10.2 From a10101d5ff9e34c0a1a526725474eef84409529a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 28 Oct 2008 14:18:29 +0800 Subject: Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index c22c47b..dda5443 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -72,13 +72,13 @@ unsigned int __bfin_cycles_mod; /**************************************************************************/ -static unsigned int bfin_getfreq(unsigned int cpu) +static unsigned int bfin_getfreq_khz(unsigned int cpu) { /* The driver only support single cpu */ if (cpu != 0) return -1; - return get_cclk(); + return get_cclk() / 1000; } @@ -96,7 +96,7 @@ static int bfin_target(struct cpufreq_policy *policy, cclk_hz = bfin_freq_table[index].frequency; - freqs.old = bfin_getfreq(0); + freqs.old = bfin_getfreq_khz(0); freqs.new = cclk_hz; freqs.cpu = 0; @@ -137,8 +137,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -EINVAL; - cclk = get_cclk(); - sclk = get_sclk(); + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; #if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) min_cclk = sclk * 2; @@ -152,7 +152,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; - pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n", + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", bfin_freq_table[index].frequency, dpm_state_table[index].csel, dpm_state_table[index].tscale); @@ -173,7 +173,7 @@ static struct freq_attr *bfin_freq_attr[] = { static struct cpufreq_driver bfin_driver = { .verify = bfin_verify_speed, .target = bfin_target, - .get = bfin_getfreq, + .get = bfin_getfreq_khz, .init = __bfin_cpu_init, .name = "bfin cpufreq", .owner = THIS_MODULE, -- cgit v0.10.2 From 72edff8dd45fdee6e1a2bc431baefd8a5372f7cb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 15:42:13 +0800 Subject: Blackfin arch: fix incorrect limit check for bf54x check_gpio Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 6e08f42..5c0800a 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -218,7 +218,7 @@ inline int check_gpio(unsigned gpio) if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio > MAX_BLACKFIN_GPIOS) + || gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } -- cgit v0.10.2 From b2c2f30388c682520ae2d07c8852b4225dd4a4d7 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Tue, 28 Oct 2008 15:57:49 +0800 Subject: Blackfin arch: fix bug - shared lib function in L2 failed be called Allow user space to access L2 SRAM. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 77800dd..0c3ea11 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -351,10 +351,15 @@ int _access_ok(unsigned long addr, unsigned long size) return 1; #endif #if L1_DATA_B_LENGTH != 0 - if (addr >= L1_DATA_B_START + if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1) && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) return 1; #endif +#if L2_LENGTH != 0 + if (addr >= L2_START + (_ebss_l2 - _stext_l2) + && addr + size <= L2_START + L2_LENGTH) + return 1; +#endif return 0; } EXPORT_SYMBOL(_access_ok); diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 0f1ca69..cc6f336 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -183,10 +183,10 @@ static void __init l2_sram_init(void) return; } - free_l2_sram_head.next->paddr = (void *)L2_START + - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); - free_l2_sram_head.next->size = L2_LENGTH - - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->paddr = + (void *)L2_START + (_ebss_l2 - _stext_l2); + free_l2_sram_head.next->size = + L2_LENGTH - (_ebss_l2 - _stext_l2); free_l2_sram_head.next->pid = 0; free_l2_sram_head.next->next = NULL; -- cgit v0.10.2 From af2b0a1ec37c61513d83d2d123658b4ef69d2ce9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 1 Nov 2008 12:55:37 -0700 Subject: RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read() The array wqe->read.reserved has only two entries, but iwch_post_zb_read() sets [0], [1], and [2], which is one too many. This is harmless since it runs into the next field, rem_stag, which is initialized correctly immediately after, but we might as well get things right, especially since it makes the code smaller. This was spotted by the Coverity checker (CID 2475). Signed-off-by: Roland Dreier Acked-by: Steve Wise diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3e4585c..19661b2 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->read.rdmaop = T3_READ_REQ; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(1); wqe->read.rem_to = cpu_to_be64(1); wqe->read.local_stag = cpu_to_be32(1); -- cgit v0.10.2 From 60df3de8b1f5ce085049e9e3c83d96643c426158 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 30 Oct 2008 13:02:54 +0200 Subject: pcmcia: fix indentation & braces disagreement - add braces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broken by d8b0a49da4f2 (pcmcia: deprecate CS_BAD_VCC and CS_BAD_VPP). Signed-off-by: Ilpo Järvinen Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 76d4a98..f5d0ba8 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev, /* We only allow changing Vpp1 and Vpp2 to the same value */ if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) + if (mod->Vpp1 != mod->Vpp2) { ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n"); return -EINVAL; + } s->socket.Vpp = mod->Vpp1; if (s->ops->set_socket(s, &s->socket)) { dev_printk(KERN_WARNING, &s->dev, -- cgit v0.10.2 From 3e879f61434632ca099804713099f8f1627f929e Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 2 Nov 2008 19:33:24 +0900 Subject: pcmcia: setup resource information for pseudo multifunction devices. Setup "io" and "irq" for pseudo multifunction devices. Signed-off-by: Komuro Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7956602..00eee14 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -668,6 +668,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list) if (p_dev->func == tmp_dev->func) { p_dev->function_config = tmp_dev->function_config; + p_dev->io = tmp_dev->io; + p_dev->irq = tmp_dev->irq; kref_get(&p_dev->function_config->ref); } -- cgit v0.10.2 From 2509698687e2d8265a19d800f7daa6f87790a529 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 1 Nov 2008 11:46:06 +0100 Subject: pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() Signed-Off-By: Kay Sievers Acked-by: Greg Kroah-Hartman Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index c68c5d3..5d0e60e 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -226,7 +226,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) /* set proper values in socket->dev */ dev_set_drvdata(&socket->dev, socket); socket->dev.class = &pcmcia_socket_class; - snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); + dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock); /* base address = 0, map = 0 */ socket->cis_mem.flags = 0; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 00eee14..47cab31 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f { struct pcmcia_device *p_dev, *tmp_dev; unsigned long flags; - int bus_id_len; s = pcmcia_get_socket(s); if (!s) @@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f /* by default don't allow DMA */ p_dev->dma_mask = DMA_MASK_NONE; p_dev->dev.dma_mask = &p_dev->dma_mask; - bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no); - - p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL); + dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no); + if (!dev_name(&p_dev->dev)) + goto err_free; + p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev)); if (!p_dev->devname) goto err_free; - sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id); ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname); spin_lock_irqsave(&pcmcia_dev_list_lock, flags); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 17f4ecf..9ca22c7 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex); ======================================================================*/ static struct resource * -make_resource(resource_size_t b, resource_size_t n, int flags, char *name) +make_resource(resource_size_t b, resource_size_t n, int flags, const char *name) { struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); @@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star static struct resource *nonstatic_find_io_region(unsigned long base, int num, unsigned long align, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min = base; @@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num, static struct resource * nonstatic_find_mem_region(u_long base, u_long num, u_long align, int low, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min, max; -- cgit v0.10.2 From e689597fe890cf22e23195037aa668c39b25ae4b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 2 Nov 2008 19:55:45 +0100 Subject: pcmcia: add braces in error path Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index dcce9f5..4a110b7 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s) char *buf; buf = kmalloc(256, GFP_KERNEL); - if (buf == NULL) + if (buf == NULL) { dev_printk(KERN_WARNING, &s->dev, "no memory for verifying CIS\n"); return -ENOMEM; + } list_for_each_entry(cis, &s->cis_cache, node) { int len = cis->len; -- cgit v0.10.2 From 5880ff19fa29466cb9d7e293710e6aebecfecdd1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 30 Oct 2008 13:39:43 +0200 Subject: RDMA/nes: Reindent mis-indented spinlocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 932e56f..ffdd141 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; qsize = nesqp->hwqp.sq_tail; /* Check for SQ overflow */ if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) { - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return -EINVAL; } @@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, nes_write32(nesdev->regs+NES_WQE_ALLOC, (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id); - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return 0; } @@ -3212,7 +3212,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; @@ -3337,7 +3337,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3368,7 +3368,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.rq_head; @@ -3421,7 +3421,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3453,7 +3453,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "\n"); - spin_lock_irqsave(&nescq->lock, flags); + spin_lock_irqsave(&nescq->lock, flags); head = nescq->hw_cq.cq_head; cq_size = nescq->hw_cq.cq_size; @@ -3562,7 +3562,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n", cqe_count, nescq->hw_cq.cq_number); - spin_unlock_irqrestore(&nescq->lock, flags); + spin_unlock_irqrestore(&nescq->lock, flags); return cqe_count; } -- cgit v0.10.2 From 35c6d6942c966e6d74ea801d8b5007d7f900ce92 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:37:35 -0800 Subject: RDMA/nes: Correct handling of PBL resources * Roll back allocated structures on failures. * Use GFP_ATOMIC instead of GFP_KERNEL since we are holding a lock. * Acquire nesadapter->pbl_lock when modifying PBL counters. * Decrement PBL counters on deallocation. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index ffdd141..a8c2193 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used; } @@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used; } @@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, goto failed_vpbl_alloc; } - nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL); + nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; + nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC); if (!nesfmr->root_vpbl.leaf_vpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; goto failed_leaf_vpbl_alloc; } - nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p" " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n", nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl); @@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, nesfmr->root_vpbl.pbl_pbase); failed_vpbl_alloc: + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + else + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + +failed_vpbl_avail: kfree(nesfmr); failed_fmr_alloc: @@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, */ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) { + unsigned long flags; struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr); struct nes_fmr *nesfmr = to_nesfmr(nesmr); struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device); struct nes_device *nesdev = nesvnic->nesdev; - struct nes_mr temp_nesmr = *nesmr; + struct nes_adapter *nesadapter = nesdev->nesadapter; int i = 0; - temp_nesmr.ibmw.device = ibfmr->device; - temp_nesmr.ibmw.pd = ibfmr->pd; - temp_nesmr.ibmw.rkey = ibfmr->rkey; - temp_nesmr.ibmw.uobject = NULL; - /* free the resources */ if (nesfmr->leaf_pbl_cnt == 0) { /* single PBL case */ @@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase, nesfmr->root_vpbl.pbl_pbase); } + nesmr->ibmw.device = ibfmr->device; + nesmr->ibmw.pd = ibfmr->pd; + nesmr->ibmw.rkey = ibfmr->rkey; + nesmr->ibmw.uobject = NULL; + + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) { + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl); + } else { + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl); + } + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } - return nes_dealloc_mw(&temp_nesmr.ibmw); + return nes_dealloc_mw(&nesmr->ibmw); } -- cgit v0.10.2 From 2e369544ac14de7bd0d76b369c1f6110eefbea8a Mon Sep 17 00:00:00 2001 From: Vadim Makhervaks Date: Sun, 2 Nov 2008 21:39:17 -0800 Subject: RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps Fix CQ allocation for multicast receive queue applications. Before this patch, the CQ was not lined up with the right NIC. Signed-off-by: Vadim Makhervaks Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index a8c2193..d36c9a0 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1617,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_ucontext->mcrqf = req.mcrqf; if (nes_ucontext->mcrqf) { if (nes_ucontext->mcrqf & 0x80000000) - nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1; + nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1); else if (nes_ucontext->mcrqf & 0x40000000) nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else -- cgit v0.10.2 From 633693660045b3e46a63ed618eb38a54339fbcc0 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:40:55 -0800 Subject: RDMA/nes: Mitigate compatibility issue regarding PCIe write credits Under heavy load, there is an compatibility issue regarding PCIe write credits with certain chipsets. It can be mitigated by limiting read requests to 256 Bytes. This workaround is always enabled for Tbird2 on Gladius. We also add a module parameter to enable workaround for non-Gladius cards. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a2b04d6..aa1dc41 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); +static unsigned int limit_maxrdreqsz; +module_param(limit_maxrdreqsz, bool, 0644); +MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); + LIST_HEAD(nes_adapter_list); static LIST_HEAD(nes_dev_list); @@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i nesdev->nesadapter->port_count; } + if ((limit_maxrdreqsz || + ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) && + (hw_rev == NE020_REV1))) && + (pcie_get_readrq(pcidev) > 256)) { + if (pcie_set_readrq(pcidev, 256)) + printk(KERN_ERR PFX "Unable to set max read request" + " to 256 bytes\n"); + else + nes_debug(NES_DBG_INIT, "Max read request size set" + " to 256 bytes\n"); + } + tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev); /* bring up the Control QP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 610b9d8..bc0b4de 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -40,6 +40,7 @@ #define NES_PHY_TYPE_ARGUS 4 #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 +#define NES_PHY_TYPE_GLADIUS 7 #define NES_MULTICAST_PF_MAX 8 -- cgit v0.10.2 From c527c8a7ffa18400c2c1488f7ab5aff5e83f3c8e Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 3 Nov 2008 20:46:21 +0000 Subject: [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error When retrying kernel_recvmsg, reset iov_base and iov_len. Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv' It happens if the previous call fails with EAGAIN. If you want to call recvmsg() after EAGAIN failure, you need to reset iov." Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9f9248..c682be8 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -417,9 +417,14 @@ incomplete_rcv: msleep(1); /* minimum sleep to prevent looping allowing socket to clear and app threads to set tcpStatus CifsNeedReconnect if server hung */ - if (pdu_length < 4) + if (pdu_length < 4) { + iov.iov_base = (4 - pdu_length) + + (char *)smb_buffer; + iov.iov_len = pdu_length; + smb_msg.msg_control = NULL; + smb_msg.msg_controllen = 0; goto incomplete_rcv; - else + } else continue; } else if (length <= 0) { if (server->tcpStatus == CifsNew) { -- cgit v0.10.2 From c2d06fe338912ee56c2ddd7de5574d5396ed8050 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 11 Sep 2008 10:56:00 +0800 Subject: intel_menlow: don't set max_state a negative value max_state is unsigned long. don't set max_state a negative value Cc : Thomas Sujith Cc : Roel Kluin Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index e00a275..124b37d 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -71,6 +71,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, if (ACPI_FAILURE(status)) return -EFAULT; + if (!value) + return -EINVAL; + *max_state = value - 1; return 0; } @@ -121,7 +124,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, if (memory_get_int_max_bandwidth(cdev, &max_state)) return -EFAULT; - if (max_state < 0 || state > max_state) + if (state > max_state) return -EINVAL; arg_list.count = 1; -- cgit v0.10.2 From 7b0f5df4c88bac46fe749d36d905fc7ad0296587 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 11:18:56 -0800 Subject: mlx4_core: Fix unused variable warning Fix drivers/net/mlx4/profile.c:55: warning: 'res_name' defined but not used by making mlx4_dbg() always use all of its parameters, regardless of whether CONFIG_MLX4_DEBUG is set or not. Reported-by: Alexander Beregalov Signed-off-by: Roland Dreier diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fa..56a2e21 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ -- cgit v0.10.2 From 6b0eea21efed26f92e18741e54a3121cf5cd197e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 09:21:05 +0900 Subject: [SCSI] megaraid: fix mega_internal_command oops scsi_cmnd->cmnd was changed from a static array to a pointer post 2.6.25. It breaks mega_internal_command(): static int mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) { ... scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); scmd = &adapter->int_scmd; memset(scmd, 0, sizeof(Scsi_Cmnd)); sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; mega_internal_command() uses scsi_cmnd allocated internally so scmd->cmnd is NULL here. This patch adds a static array for cdb to adapter_t and uses it here. This also uses scsi_allocate_command/scsi_free_command, the recommended way to allocate struct scsi_cmnd since the driver might use sense_buffer in struct scsi_cmnd. Signed-off-by: FUJITA Tomonori Reviewed-by: Boaz Harrosh Tested-by: Pascal Terjan Reported-by: Pascal Terjan Acked-by: "Yang, Bo" Signed-off-by: James Bottomley diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 28c9da7..7dc62de 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb_t *scb; int rval; + scmd = scsi_allocate_command(GFP_KERNEL); + if (!scmd) + return -ENOMEM; + /* * The internal commands share one command id and hence are * serialized. This is so because we want to reserve maximum number of @@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); - scmd = &adapter->int_scmd; - memset(scmd, 0, sizeof(Scsi_Cmnd)); - sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; + memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); + scmd->cmnd = adapter->int_cdb; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; @@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) mutex_unlock(&adapter->int_mtx); + scsi_free_command(GFP_KERNEL, scmd); + return rval; } diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index ee70bd4..795201f 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -888,8 +888,8 @@ typedef struct { u8 sglen; /* f/w supported scatter-gather list length */ + unsigned char int_cdb[MAX_COMMAND_SIZE]; scb_t int_scb; - Scsi_Cmnd int_scmd; struct mutex int_mtx; /* To synchronize the internal commands */ struct completion int_waitq; /* wait queue for internal -- cgit v0.10.2 From 821b3996001508e872582dcafc7575021f122728 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Fri, 24 Oct 2008 15:13:44 -0700 Subject: [SCSI] qla2xxx: Correct Atmel flash-part handling. Use correct block size (4K) for erase command 0x20 for Atmel Flash. Use dword addresses for determining sector boundary. Cc: Stable Tree Signed-off-by: Lalit Chandivade Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f25f41a..b971940 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host { uint8_t fcode_revision[16]; uint32_t fw_revision[4]; - uint16_t fdt_odd_index; uint32_t fdt_wrt_disable; uint32_t fdt_erase_cmd; uint32_t fdt_block_size; diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 90a1321..e4af678 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -722,6 +722,7 @@ done: static void qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { +#define FLASH_BLK_SIZE_4K 0x1000 #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 const char *loc, *locations[] = { "MID", "FDT" }; @@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha) loc = locations[1]; mid = le16_to_cpu(fdt->man_id); fid = le16_to_cpu(fdt->id); - ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -788,8 +788,7 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; case 0x1f: /* Atmel 26DF081A. */ - ha->fdt_odd_index = 1; - ha->fdt_block_size = FLASH_BLK_SIZE_64K; + ha->fdt_block_size = FLASH_BLK_SIZE_4K; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320); ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339); ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336); @@ -801,9 +800,9 @@ no_flash_data: } done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, - ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, + ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable, ha->fdt_block_size)); } @@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - if (ha->fdt_odd_index) { - findex = faddr << 2; - fdata = findex & sec_mask; - } else { - findex = faddr; - fdata = (findex & sec_mask) << 2; - } + + findex = faddr; + fdata = (findex & sec_mask) << 2; /* Are we at the beginning of a sector? */ if ((findex & rest_addr) == 0) { -- cgit v0.10.2 From 737faece278ffec78612675bc378a4258d8293bb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:45 -0700 Subject: [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space. http://bugzilla.kernel.org/show_bug.cgi?id=9422 Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a470f2d..ecf91ad 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -140,7 +140,6 @@ int qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); pci_write_config_word(ha->pdev, PCI_COMMAND, w); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -174,7 +170,6 @@ int qla2300_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; uint32_t cnt; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -259,7 +251,6 @@ int qla24xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; @@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -306,7 +294,6 @@ int qla25xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; pci_set_master(ha->pdev); pci_try_set_mwi(ha->pdev); @@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; -- cgit v0.10.2 From 680d7db88ace53c673e1c437c9b6abcc053e8d6f Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Fri, 24 Oct 2008 15:13:46 -0700 Subject: [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below. For 23XX ISPs, max_vports may return an invalid value. Do not honour it. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index ecf91ad..4218f20 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -964,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_minor_version, &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); - qla2x00_resize_request_q(ha); ha->flags.npiv_supported = 0; if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA84XX(ha)) && @@ -976,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; } + qla2x00_resize_request_q(ha); if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 36bc685..3402746 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, *cur_iocb_cnt = mcp->mb[7]; if (orig_iocb_cnt) *orig_iocb_cnt = mcp->mb[10]; - if (max_npiv_vports) + if (ha->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; } -- cgit v0.10.2 From 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Fri, 24 Oct 2008 15:13:47 -0700 Subject: [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails. Mike Reed noted (https://bugzilla.novell.com/show_bug.cgi?id=421330) that the driver was incorrectly returning a SUCCESS status if the driver's request to the firmware to abort a command failed. By doing so, the mid-layer believed, incorrectly, that the command has completed and has been returned (ultimately clearing scsi_cmnd.request_buffer) yet the driver still has the command. What should correctly happen is a mid-layer escalation (device-reset, etc.) of recovery during which the driver will eventually return the outstanding commands to the mid-layer. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 21dd182..3556720 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); -- cgit v0.10.2 From 3869a1728808fc9e075d0091bb03826fa6ed58b0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:48 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k9. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index be5e299..eea6720 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k8" +#define QLA2XXX_VERSION "8.02.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v0.10.2 From 26816f1c2bf59a269917815adb1d972b9fb65e3a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:05 +0100 Subject: [SCSI] zfcp: Dont clear reference from SCSI device to unit It is possible that a remote port has a problem, the SCSI device gets deleted after the rport timeout and then the timeout for pending SCSI commands trigger an abort. For this case, don't delete the reference from the SCSI device to the zfcp unit, so that we can still have the reference to issue an abort request. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index ca8f85f..e46fd3e 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - WARN_ON(!unit); - if (unit) { - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); - sdpnt->hostdata = NULL; - unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); - zfcp_unit_put(unit); - } + atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); + unit->device = NULL; + zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_unit_put(unit); } static int zfcp_scsi_slave_configure(struct scsi_device *sdp) -- cgit v0.10.2 From 45316a86a67934ab499dcfac44c91aa8f39c4c78 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 4 Nov 2008 16:35:06 +0100 Subject: [SCSI] zfcp: fix req_list_locking. The per adapter req_list_lock must be held with interrupts disabled, otherwise we might end up with nice deadlocks as lockdep tells us (see below). zfcp 0.0.1804: QDIO problem occurred. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.27-rc8-00035-g4a77035-dirty #86 --------------------------------------------------------- swapper/0 just changed the state of lock: (&adapter->erp_lock){++..}, at: [<00000000002c82ae>] zfcp_erp_adapter_reopen+0x4e/0x8c but this lock took another, hard-irq-unsafe lock in the past: (&adapter->req_list_lock){-+..} and interrupts could create inverse lock ordering between them. [tons of backtraces, but only the interesting part follows] the second lock's dependencies: -> (&adapter->req_list_lock){-+..} ops: 2280627634176 { initial-use at: [<0000000000071f10>] __lock_acquire+0x504/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002cf684>] zfcp_fsf_req_dismiss_all+0x50/0x140 [<00000000002c87ee>] zfcp_erp_adapter_strategy_generic+0x66/0x3d0 [<00000000002c9498>] zfcp_erp_thread+0x88c/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc in-softirq-W at: [<0000000000072172>] __lock_acquire+0x766/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002ca73e>] zfcp_qdio_int_resp+0xbe/0x2ac [<000000000027a1d6>] qdio_kick_inbound_handler+0x82/0xa0 [<000000000027daba>] tiqdio_inbound_processing+0x62/0xf8 [<0000000000047ba4>] tasklet_action+0x100/0x1f4 [<0000000000048b5a>] __do_softirq+0xae/0x154 [<0000000000021e4a>] do_softirq+0xea/0xf0 [<00000000000485de>] irq_exit+0xde/0xe8 [<0000000000268c64>] do_IRQ+0x160/0x1fc [<00000000000261a2>] io_return+0x0/0x8 [<000000000001b8f8>] cpu_idle+0x17c/0x224 hardirq-on-W at: [<0000000000072190>] __lock_acquire+0x784/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d702c>] _spin_lock+0x5c/0x9c [<00000000002caff6>] zfcp_fsf_req_send+0x3e/0x158 [<00000000002ce7fe>] zfcp_fsf_exchange_config_data+0x106/0x124 [<00000000002c8948>] zfcp_erp_adapter_strategy_generic+0x1c0/0x3d0 [<00000000002c98ea>] zfcp_erp_thread+0xcde/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc } ... key at: [<0000000000e356c8>] __key.26629+0x0/0x8 Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5ae1d49..694d9c9 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,13 +770,14 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; struct zfcp_qdio_queue *req_q = &adapter->req_q; + unsigned long flags; int idx; /* put allocated FSF request into hash table */ - spin_lock(&adapter->req_list_lock); + spin_lock_irqsave(&adapter->req_list_lock, flags); idx = zfcp_reqlist_hash(req->req_id); list_add_tail(&req->list, &adapter->req_list[idx]); - spin_unlock(&adapter->req_list_lock); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); req->qdio_outb_usage = atomic_read(&req_q->count); req->issued = get_clock(); -- cgit v0.10.2 From 88f2a977870af655296a682fe2a58c822cd25bb2 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:07 +0100 Subject: [SCSI] zfcp: fix mempool usage for status_read requests When allocating fsf requests without qtcb, store the pointer to the mempool in the fsf requests for later call to mempool_free. This codepath is only used by the status_read requests. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 694d9c9..5e8517f 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool) if (!req) return NULL; memset(req, 0, sizeof(*req)); + req->pool = pool; return req; } -- cgit v0.10.2 From 3765138ae946e6e29b22bf15a9647c600c232639 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:08 +0100 Subject: [SCSI] zfcp: Fix request list handling in error path Fix the handling of the request list in the error path: - Use irqsave for the lock as in the good path. - Before removing the request, check if it is still in the list, a call to dismiss_all might have changed the list in between. - zfcp_qdio_send does not change the queue counters on failure, trying revert something is wrong, so remove this. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5e8517f..d024442 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,7 +770,6 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - struct zfcp_qdio_queue *req_q = &adapter->req_q; unsigned long flags; int idx; @@ -780,19 +779,15 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) list_add_tail(&req->list, &adapter->req_list[idx]); spin_unlock_irqrestore(&adapter->req_list_lock, flags); - req->qdio_outb_usage = atomic_read(&req_q->count); + req->qdio_outb_usage = atomic_read(&adapter->req_q.count); req->issued = get_clock(); if (zfcp_qdio_send(req)) { - /* Queues are down..... */ del_timer(&req->timer); - spin_lock(&adapter->req_list_lock); - zfcp_reqlist_remove(adapter, req); - spin_unlock(&adapter->req_list_lock); - /* undo changes in request queue made for this request */ - atomic_add(req->sbal_number, &req_q->count); - req_q->first -= req->sbal_number; - req_q->first += QDIO_MAX_BUFFERS_PER_Q; - req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + /* lookup request again, list might have changed */ + if (zfcp_reqlist_find_safe(adapter, req)) + zfcp_reqlist_remove(adapter, req); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_erp_adapter_reopen(adapter, 0, 116, req); return -EIO; } -- cgit v0.10.2 From adc90daffbb454eeae00df92855a88ba79b5b636 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:09 +0100 Subject: [SCSI] zfcp: Fix cast warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix leftover from last typecast patch: drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_port_enqueue’: drivers/s390/scsi/zfcp_aux.c:629: warning: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘u64’ Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 3b56220..3d4e3e3 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set(&port->refcount, 0); - dev_set_name(&port->sysfs_device, "0x%016llx", wwpn); + dev_set_name(&port->sysfs_device, "0x%016llx", + (unsigned long long)wwpn); port->sysfs_device.parent = &adapter->ccw_device->dev; port->sysfs_device.release = zfcp_sysfs_port_release; -- cgit v0.10.2 From 77fd9494bce3188c20d82e45464ed9b1be83bf98 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:10 +0100 Subject: [SCSI] zfcp: Wait for port scan to complete when setting adapter online Attaching a unit immediately after setting the adapter online should be possible. The problem right now is that the port_scan runs from a workqueue and has not finished when the set_online call returns and the sysfs structures for the ports are not available yet. Fix that by waiting for the port scan to complete. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index b04038c..951a8d4 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, NULL); zfcp_erp_wait(adapter); - goto out; + up(&zfcp_data.config_sema); + flush_work(&adapter->scan_work); + return 0; out_scsi_register: zfcp_erp_thread_kill(adapter); -- cgit v0.10.2 From 7ea633ffad0bcb0b3e0deee81997d07f292e7f44 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Tue, 4 Nov 2008 16:35:11 +0100 Subject: [SCSI] zfcp: fix erp timeout cleanup for port open requests If an open port fsf request times out (in erp) the corresponding erp_action member of the fsf request need to set to NULL. If the port structure will be removed later-on there will be still a reference in the fsf request to the non existing erp_action otherwise. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9040f73..35364f6 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_rec_dbf_event_action(142, act); + act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_rec_dbf_event_action(143, act); -- cgit v0.10.2 From d94ce6c6e99252ab2ba340b0398c8651713a9f05 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:12 +0100 Subject: [SCSI] zfcp: Fix hexdump data in s390dbf traces Fix multiple problems found in the hexdump data: - length calculation was wrong, traces were incomplete - FC payloads were dumped in different record than the output function tried to read - minor fixes in output - allow complete RSCN traces (up to 1024 bytes according to spec) Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 060f5f2..31012d5 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len, dump->offset = offset; dump->size = min(from_len - offset, room); memcpy(dump->data, from + offset, dump->size); - debug_event(dbf, level, dump, dump->size); + debug_event(dbf, level, dump, dump->size + sizeof(*dump)); } } @@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view, t.tv_sec, t.tv_nsec); zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid); } else { - zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset, + zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset, dump->total_size); if ((dump->offset + dump->size) == dump->total_size) p += sprintf(p, "\n"); @@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); + p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: @@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view, else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0) zfcp_hba_dbf_view_berr(&p, &r->u.berr); - p += sprintf(p, "\n"); + if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0) + p += sprintf(p, "\n"); return p - out_buf; } @@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->req); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) oct->options = hdr->options; oct->max_res_size = hdr->max_res_size; oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), oct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->resp); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) rct->expl = hdr->reason_code_expl; rct->vendor_unique = hdr->vendor_unique; rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), rct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level, rec->u.els.ls_code = ls_code; debug_event(adapter->san_dbf, level, rec, sizeof(*rec)); zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level, - buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD)); + buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD)); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, char *out_buf, const char *in_buf) { struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf; - char *buffer = NULL; - int buflen = 0, total = 0; char *p = out_buf; if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0) @@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype); zfcp_dbf_out(&p, "options", "0x%02x", ct->options); zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp; zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code); @@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code); zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl); zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_els *els = &r->u.els; zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code); - total = els->len; - buffer = els->payload; - buflen = min(total, ZFCP_DBF_ELS_PAYLOAD); } - - zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total); - if (buflen == total) - p += sprintf(p, "\n"); - return p - out_buf; } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index e8f4508..5d6b2df 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request { u8 options; u16 max_res_size; u32 len; -#define ZFCP_DBF_CT_PAYLOAD 24 - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_ct_response { @@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response { u8 expl; u8 vendor_unique; u32 len; - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_els { u8 ls_code; u32 len; -#define ZFCP_DBF_ELS_PAYLOAD 32 -#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024 - u8 payload[ZFCP_DBF_ELS_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record { @@ -196,6 +190,8 @@ struct zfcp_san_dbf_record { struct zfcp_san_dbf_record_ct_response ct_resp; struct zfcp_san_dbf_record_els els; } u; +#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024 + u8 payload[32]; } __attribute__ ((packed)); struct zfcp_scsi_dbf_record { -- cgit v0.10.2 From 939c2288c35132fe340b2694c7d02cacf7593723 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 4 Nov 2008 19:47:19 -0600 Subject: [SCSI] scsi_error regression: Fix idempotent command handling Drivers want to be able to return DID_TRANSPORT_DISRUPTED and have it do the right thing for commands like tape and passthrouh as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED was skipping that check so it could have caused a problem with tape commands. This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 94ed262..3863617 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1340,9 +1340,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * LLD/transport was disrupted during processing of the IO. * The transport class is now blocked/blocking, * and the transport will decide what to do with the IO - * based on its timers and recovery capablilities. + * based on its timers and recovery capablilities if + * there are enough retries. */ - return ADD_TO_MLQUEUE; + goto maybe_retry; case DID_TRANSPORT_FAILFAST: /* * The transport decided to failfast the IO (most likely -- cgit v0.10.2 From 7f3abf5c7c9a9febdd643b9d4005382144525475 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Wed, 5 Nov 2008 10:56:52 -0800 Subject: IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr() Set mr->umem to NULL in mlx4_ib_alloc_fast_reg_mr(). Otherwise ib_dereg_mr() may invoke ib_umem_release() on a random pointer value and get an oops. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 87f5c5a..8e4d26d 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, goto err_mr; mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + mr->umem = NULL; return &mr->ibmr; -- cgit v0.10.2 From 5704d626e7c770ef4a984a697bac7eff07420a39 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:42 -0700 Subject: ACPI: remove comments about debug layer/level to use I don't think there's any point in cluttering the code with these. Better to improve the documentation so *anybody* can figure out what layer & level to use. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1b8f67d2..642554b 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { - if (acpi_pci_disabled) return 0; - /* DEBUG: - acpi_dbg_layer = ACPI_PCI_COMPONENT; - acpi_dbg_level = 0xFFFFFFFF; - */ - if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0cc..bf0c26a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2094,12 +2094,6 @@ static int __init acpi_video_init(void) { int result = 0; - - /* - acpi_dbg_level = 0xFFFFFFFF; - acpi_dbg_layer = 0x08000000; - */ - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) return -ENODEV; -- cgit v0.10.2 From 5b881479af4352791e5004b74e3639f1416c5fe4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:47 -0700 Subject: ACPI: SBS: remove useless acpi_cm_sbs_init() initcall acpi_cm_sbs_init() doesn't do anything, so we can just remove it. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 4441e84..80d5c88 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -105,9 +105,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) return; } EXPORT_SYMBOL(acpi_unlock_battery_dir); - -static int __init acpi_cm_sbs_init(void) -{ - return 0; -} -subsys_initcall(acpi_cm_sbs_init); -- cgit v0.10.2 From fefe5ab3d67b0ade6200fec5ed6f2812cbcbb658 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:58 -0700 Subject: ACPI: remove CONFIG_ACPI_POWER Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f6329..4fa7866 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -341,10 +341,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_POWER - bool - default y - config ACPI_SYSTEM bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027..8017f63 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o -obj-$(CONFIG_ACPI_POWER) += power.o +obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c60..818215f 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -86,7 +86,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, Power Resource -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_POWER int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); @@ -94,7 +93,6 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; -#endif /* -------------------------------------------------------------------------- Embedded Controller -- cgit v0.10.2 From 8950d89acaa8c353869e681772479d7955ae6f7a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:18:03 -0700 Subject: ACPI: remove CONFIG_ACPI_EC Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 4fa7866..90cb2a8 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -324,14 +324,6 @@ config ACPI_DEBUG_FUNC_TRACE ACPI Debug Statements slow down ACPI processing. Function trace is about half of the penalty and is rarely useful. -config ACPI_EC - bool - default y - help - This driver is required on some systems for the proper operation of - the battery and thermal drivers. If you are compiling for a - mobile system, say Y. - config ACPI_PCI_SLOT tristate "PCI slot detection driver" default n diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 8017f63..fc62231 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -39,7 +39,7 @@ obj-y += sleep/ obj-y += bus.o glue.o obj-y += scan.o # Keep EC driver first. Initialization of others depend on it. -obj-$(CONFIG_ACPI_EC) += ec.o +obj-y += ec.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c797c64..765fd1c 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -774,7 +774,7 @@ static int __init acpi_bus_init(void) "Unable to initialize ACPI OS objects\n"); goto error1; } -#ifdef CONFIG_ACPI_EC + /* * ACPI 2.0 requires the EC driver to be loaded and work before * the EC device is found in the namespace (i.e. before acpi_initialize_objects() @@ -785,7 +785,6 @@ static int __init acpi_bus_init(void) */ status = acpi_ec_ecdt_probe(); /* Ignore result. Not having an ECDT is not fatal. */ -#endif status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); if (ACPI_FAILURE(status)) { diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb7..1b128d1 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 9494400..4494ad2 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -230,7 +230,7 @@ config HP_WMI config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR @@ -260,7 +260,7 @@ config PANASONIC_LAPTOP config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 818215f..b3c40dc 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -97,10 +97,8 @@ extern int acpi_power_nocheck; /* -------------------------------------------------------------------------- Embedded Controller -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_EC int acpi_ec_ecdt_probe(void); int acpi_boot_ec_enable(void); -#endif /* -------------------------------------------------------------------------- Processor diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452..d7846bd 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -163,8 +163,6 @@ struct acpi_pci_driver { int acpi_pci_register_driver(struct acpi_pci_driver *driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver); -#ifdef CONFIG_ACPI_EC - extern int ec_read(u8 addr, u8 *val); extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, @@ -172,8 +170,6 @@ extern int ec_transaction(u8 command, u8 *rdata, unsigned rdata_len, int force_poll); -#endif /*CONFIG_ACPI_EC*/ - #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) typedef void (*wmi_notify_handler) (u32 value, void *context); -- cgit v0.10.2 From ad93a765c1834db031b5bf1c2baf2a50d0462ca4 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:52:55 -0700 Subject: ACPI: Disambiguate processor declaration type Declaring processors in ACPI namespace can be done using either a "Processor" definition or a "Device" definition (see section 8.4 - Declaring Processors; "Advanced Configuration and Power Interface Specification", Revision 3.0b). Currently the two processor declaration types are conflated. This patch disambiguates the processor declaration's definition type enabling subsequent code to behave uniquely based explicitly on the declaration's type. Signed-off-by: Myron Stowe Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f..0c670dd 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -89,6 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, 0}, {ACPI_PROCESSOR_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e..3fb6e2d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1043,7 +1043,7 @@ static void acpi_device_set_id(struct acpi_device *device, hid = ACPI_POWER_HID; break; case ACPI_BUS_TYPE_PROCESSOR: - hid = ACPI_PROCESSOR_HID; + hid = ACPI_PROCESSOR_OBJECT_HID; break; case ACPI_BUS_TYPE_SYSTEM: hid = ACPI_SYSTEM_HID; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c60..7469ff3 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -41,6 +41,7 @@ */ #define ACPI_POWER_HID "LNXPOWER" +#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU" #define ACPI_PROCESSOR_HID "ACPI0007" #define ACPI_SYSTEM_HID "LNXSYSTM" #define ACPI_THERMAL_HID "LNXTHERM" -- cgit v0.10.2 From b26e9286fb438eb78bcdb68b67a3dbb8bc539125 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:00 -0700 Subject: ACPI: Behave uniquely based on processor declaration definition type Associating a Local SAPIC with a processor object is dependent upon the processor object's definition type. CPUs declared as "Processor" should use the Local SAPIC's 'processor_id', and CPUs declared as "Device" should use the 'uid'. Note that for "Processor" declarations, even if a '_UID' child object exists, it has no bearing with respect to mapping Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced Configuration and Power Interface Specification", Revision 3.0b). This patch changes the lsapic mapping logic to rely on the distinction of how the processor object was declared - the mapping can't just try both types of matches regardless of declaration type and rely on one failing as is currently being done. Signed-off-by: Myron Stowe Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 0c670dd..bc332fc 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -410,7 +410,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device) /* Use the acpiid in MADT to map cpus in case of SMP */ #ifndef CONFIG_SMP -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;} +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; } #else static struct acpi_table_madt *madt; @@ -429,27 +429,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, int *apic_id) { struct acpi_madt_local_sapic *lsapic = (struct acpi_madt_local_sapic *)entry; + u32 tmp = (lsapic->id << 8) | lsapic->eid; + /* Only check enabled APICs*/ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { - /* First check against id */ - if (lsapic->processor_id == acpi_id) { - *apic_id = (lsapic->id << 8) | lsapic->eid; - return 1; - /* Check against optional uid */ - } else if (entry->length >= 16 && - lsapic->uid == acpi_id) { - *apic_id = lsapic->uid; - return 1; - } - } + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED)) + return 0; + + /* Device statement declaration type */ + if (device_declaration) { + if (entry->length < 16) + printk(KERN_ERR PREFIX + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n", + tmp); + else if (lsapic->uid == acpi_id) + goto found; + /* Processor statement declaration type */ + } else if (lsapic->processor_id == acpi_id) + goto found; + return 0; +found: + *apic_id = tmp; + return 1; } -static int map_madt_entry(u32 acpi_id) +static int map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; int apic_id = -1; @@ -470,7 +478,7 @@ static int map_madt_entry(u32 acpi_id) if (map_lapic_id(header, acpi_id, &apic_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (map_lsapic_id(header, acpi_id, &apic_id)) + if (map_lsapic_id(header, type, acpi_id, &apic_id)) break; } entry += header->length; @@ -478,7 +486,7 @@ static int map_madt_entry(u32 acpi_id) return apic_id; } -static int map_mat_entry(acpi_handle handle, u32 acpi_id) +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; @@ -501,7 +509,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id) if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { map_lapic_id(header, acpi_id, &apic_id); } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - map_lsapic_id(header, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &apic_id); } exit: @@ -510,14 +518,14 @@ exit: return apic_id; } -static int get_cpu_id(acpi_handle handle, u32 acpi_id) +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { int i; int apic_id = -1; - apic_id = map_mat_entry(handle, acpi_id); + apic_id = map_mat_entry(handle, type, acpi_id); if (apic_id == -1) - apic_id = map_madt_entry(acpi_id); + apic_id = map_madt_entry(type, acpi_id); if (apic_id == -1) return apic_id; @@ -533,15 +541,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) Driver Interface -------------------------------------------------------------------------- */ -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) +static int acpi_processor_get_info(struct acpi_device *device) { acpi_status status = 0; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - int cpu_index; + struct acpi_processor *pr; + int cpu_index, device_declaration = 0; static int cpu0_initialized; - + pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -562,22 +571,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - /* Check if it is a Device with HID and UID */ - if (has_uid) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ unsigned long long value; status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, NULL, &value); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor _UID\n"); + printk(KERN_ERR PREFIX + "Evaluating processor _UID [%#x]\n", status); return -ENODEV; } + device_declaration = 1; pr->acpi_id = value; } else { - /* - * Evalute the processor object. Note that it is common on SMP to - * have the first (boot) processor with a valid PBLK address while - * all others have a NULL address. - */ + /* Declared with "Processor" statement; match ProcessorID */ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Evaluating processor object\n"); @@ -590,7 +600,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) */ pr->acpi_id = object.processor.proc_id; } - cpu_index = get_cpu_id(pr->handle, pr->acpi_id); + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); /* Handle UP system running SMP kernel, with no LAPIC in MADT */ if (!cpu0_initialized && (cpu_index == -1) && @@ -662,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr = acpi_driver_data(device); - result = acpi_processor_get_info(pr, device->flags.unique_id); + result = acpi_processor_get_info(device); if (result) { /* Processor is physically not present */ return 0; -- cgit v0.10.2 From 5b53ed69158eeff115004f246193d07a083445f6 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:05 -0700 Subject: ACPI: 80 column adherence and spelling fix (no functional change) Signed-off-by: Myron Stowe Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index bc332fc..b57b1f0 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -595,9 +595,10 @@ static int acpi_processor_get_info(struct acpi_device *device) } /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c - */ + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ pr->acpi_id = object.processor.proc_id; } cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); -- cgit v0.10.2 From d65dcdcf0cd55b4be1fd1f5025388e91042d63fc Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:13 +0530 Subject: intel_menlow: Add comment documenting legal GTHS values Signed-off-by: Sujith Thomas Signed-off-by: Len Brown diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index 124b37d..27b7662 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -52,6 +52,11 @@ MODULE_LICENSE("GPL"); #define MEMORY_ARG_CUR_BANDWIDTH 1 #define MEMORY_ARG_MAX_BANDWIDTH 0 +/* + * GTHS returning 'n' would mean that [0,n-1] states are supported + * In that case max_cstate would be n-1 + * GTHS returning '0' would mean that no bandwidth control states are supported + */ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, unsigned long *max_state) { -- cgit v0.10.2 From f4a9bc4c7de4cef83e86a7052eb2e88b193668e4 Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:31 +0530 Subject: intel_menlow: MAINTAINERS Signed-off-by: Sujith Thomas Signed-off-by: Len Brown diff --git a/MAINTAINERS b/MAINTAINERS index 16202c8..808bb85 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2178,6 +2178,13 @@ M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +INTEL MENLOW THERMAL DRIVER +P: Sujith Thomas +M: sujith.thomas@intel.com +L: linux-acpi@vger.kernel.org +W: http://www.lesswatts.org/projects/acpi/ +S: Supported + INTEL IA32 MICROCODE UPDATE SUPPORT P: Tigran Aivazian M: tigran@aivazian.fsnet.co.uk -- cgit v0.10.2 From d17cb18a07c587b8f9ff174a1bf6d03413eabe64 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 6 Nov 2008 20:51:59 -0500 Subject: Revert "ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanism" This reverts commit 8fd145917fb62368a9b80db59562c20576238f5a. http://bugzilla.kernel.org/show_bug.cgi?id=11942 Signed-off-by: Len Brown diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index 755baf2..a6b662c 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -15,28 +15,9 @@ void acpi_reboot(void) rr = &acpi_gbl_FADT.reset_register; - /* - * Is the ACPI reset register supported? - * - * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates - * whether the ACPI reset mechanism is supported. - * - * However, some boxes have this bit clear, yet a valid - * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only - * mechanism that works for them after S3. - * - * This suggests that other operating systems may not be checking - * the RESET_REG_SUP bit, and are using other means to decide - * whether to use the ACPI reboot mechanism or not. - * - * So when acpi reboot is requested, - * only the reset_register is checked. If the following - * conditions are met, it indicates that the reset register is supported. - * a. reset_register is not zero - * b. the access width is eight - * c. the bit_offset is zero - */ - if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0) + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) return; reset_value = acpi_gbl_FADT.reset_value; -- cgit v0.10.2 From 2d59f6a73e1cb4415cdd5a0083b1196cceffa275 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 1 Aug 2008 10:01:12 -0600 Subject: PNP: add Bjorn Helgaas as PNP co-maintainer Update Adam's email address and add myself as PNP co-maintainer. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/MAINTAINERS b/MAINTAINERS index 808bb85..5cf7492 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3336,7 +3336,9 @@ S: Maintained PNP SUPPORT P: Adam Belay -M: ambx1@neo.rr.com +M: abelay@mit.edu +P: Bjorn Helgaas +M: bjorn.helgaas@hp.com S: Maintained PNXxxxx I2C DRIVER -- cgit v0.10.2 From 0794469da3f7b2093575cbdfc1108308dd3641ce Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Oct 2008 01:18:59 +0100 Subject: ACPI: struct device - replace bus_id with dev_name(), dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: Len Brown diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6..2d46732 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -242,7 +242,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, (u32) ac->state); #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e8..e68f218 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -782,7 +782,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_batter_update could remove power_supply object */ diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f..cf7e885 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -761,20 +761,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: acpi_processor_cst_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_PROCESSOR_NOTIFY_THROTTLING: acpi_processor_tstate_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e..4dd1f31 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context) return 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Hot-removing device %s...\n", device->dev.bus_id)); - + "Hot-removing device %s...\n", dev_name(&device->dev))); if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX @@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device, acpi_device_bus_id->instance_no = 0; list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) { list_add_tail(&device->node, &device->parent->children); @@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device, result = acpi_device_setup_files(device); if(result) - printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", + dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 631ee2e..64e591b 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,8 +366,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - ldev->bus ? ldev->bus->name : "no-bus", - ldev->bus_id); + dev_name(ldev) ? ldev->bus->name : "no-bus", + dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae9..462b168 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -576,7 +576,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); @@ -605,7 +605,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); @@ -1592,14 +1592,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index 47cd7ba..8a8b377 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) wblock->handler(event, wblock->handler_data); acpi_bus_generate_netlink_event( - device->pnp.device_class, device->dev.bus_id, + device->pnp.device_class, dev_name(&device->dev), event, 0); break; } -- cgit v0.10.2 From afeb12b7478fee31888e7c34804bee2f658e7765 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 14:13:20 -0700 Subject: fujitsu-laptop: fix section mismatch warning Could fix a bug in a hotplug add scenario. WARNING: drivers/misc/fujitsu-laptop.o(.text+0xbde): Section mismatch in reference from the function acpi_fujitsu_add() to the variable .init.data:fujitsu_dmi_table The function acpi_fujitsu_add() references the variable __initdata fujitsu_dmi_table. This is often because acpi_fujitsu_add lacks a __initdata annotation or the annotation of fujitsu_dmi_table is wrong. Signed-off-by: Randy Dunlap Acked-by: Jonathan Woithe Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bf..9124fcd 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -473,7 +473,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id __initdata fujitsu_dmi_table[] = { +static struct dmi_system_id fujitsu_dmi_table[] = { { .ident = "Fujitsu Siemens S6410", .matches = { -- cgit v0.10.2 From 14a63ba821ac2a0f5166789b31241c0b7eb147d9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 29 Oct 2008 14:13:22 -0700 Subject: ACPI: use macro to replace hard number Impact: cleanup Use MACRO for rev 3 fadt id instead of 3 directly. Signed-off-by: Yinghai Lu Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 2c7885e..2817158 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void) * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at * offset 45, 55, 95, and the word located at offset 109, 110. */ - if (acpi_gbl_FADT.header.revision < 3) { + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; -- cgit v0.10.2 From 4feba70a2c1a1a0c96909f657f48b2e11e682370 Mon Sep 17 00:00:00 2001 From: Peter Gruber Date: Mon, 27 Oct 2008 23:59:36 -0400 Subject: ACPI: avoid empty file name in sysfs Since commit bc45b1d39a925b56796bebf8a397a0491489d85c acpi tables are allowed to have an empty signature and /sys/firmware/acpi/tables uses the signature as filename. Applications using naive recursion through /sys loop forever. A possible solution would be: (replacing the zero length filename with the string "NULL") http://bugzilla.kernel.org/show_bug.cgi?id=11539 Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171..62ec75e 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + char name[ACPI_NAME_SIZE]; + + if (strncmp(table_attr->name, "NULL", 4)) + memcpy(name, table_attr->name, ACPI_NAME_SIZE); + else + memcpy(name, "\0\0\0\0", 4); status = - acpi_get_table(table_attr->name, table_attr->instance, + acpi_get_table(name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; @@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; - memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); + if (table_header->signature[0] != '\0') + memcpy(table_attr->name, table_header->signature, + ACPI_NAME_SIZE); + else + memcpy(table_attr->name, "NULL", 4); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (!memcmp(table_header->signature, attr->name, - ACPI_NAME_SIZE)) + if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } table_attr->instance++; if (table_attr->instance > 1 || (table_attr->instance == 1 && - !acpi_get_table(table_header-> - signature, 2, - &header))) - sprintf(table_attr->name + 4, "%d", table_attr->instance); + !acpi_get_table + (table_header->signature, 2, &header))) + sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", + table_attr->instance); table_attr->attr.size = 0; table_attr->attr.read = acpi_table_show; -- cgit v0.10.2 From d21cf3c16b1191f3154a51e0b20c82bf851cc553 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 3 Nov 2008 14:26:40 -0500 Subject: ACPI EC: Fix regression due to use of uninitialized variable breakage introduced by following patch commit 27663c5855b10af9ec67bc7dfba001426ba21222 Author: Matthew Wilcox Date: Fri Oct 10 02:22:59 2008 -0400 acpi_evaluate_integer() does not clear passed variable if there is an error at evaluation. So if we ignore error, we must supply initialized variable. http://bugzilla.kernel.org/show_bug.cgi?id=11917 Signed-off-by: Alexey Starikovskiy Tested-by: Alan Jenkins Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316..523ac5b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -736,7 +736,7 @@ static acpi_status ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) { acpi_status status; - unsigned long long tmp; + unsigned long long tmp = 0; struct acpi_ec *ec = context; status = acpi_walk_resources(handle, METHOD_NAME__CRS, @@ -751,6 +751,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) return status; ec->gpe = tmp; /* Use the global lock for all EC transactions? */ + tmp = 0; acpi_evaluate_integer(handle, "_GLK", NULL, &tmp); ec->global_lock = tmp; ec->handle = handle; -- cgit v0.10.2 From 89595b8f2850a080d290bf778ec933ea1d99f78e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:45 -0700 Subject: ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6..5cdd713 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -37,7 +37,6 @@ #include #include -#define ACPI_AC_COMPONENT 0x00020000 #define ACPI_AC_CLASS "ac_adapter" #define ACPI_AC_DEVICE_NAME "AC Adapter" #define ACPI_AC_FILE_STATE "state" diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 71d21c5..63a17b5 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -32,7 +32,6 @@ #include #include -#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL #define ACPI_MEMORY_DEVICE_CLASS "memory" #define ACPI_MEMORY_DEVICE_HID "PNP0C80" #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e8..47f6e38 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -46,7 +46,6 @@ #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF -#define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BATTERY_CLASS "battery" #define ACPI_BATTERY_DEVICE_NAME "Battery" #define ACPI_BATTERY_NOTIFY_STATUS 0x80 diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3..fd7ca28 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -33,7 +33,6 @@ #include #include -#define ACPI_BUTTON_COMPONENT 0x00080000 #define ACPI_BUTTON_CLASS "button" #define ACPI_BUTTON_FILE_INFO "info" #define ACPI_BUTTON_FILE_STATE "state" diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 80d5c88..307963b 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -34,7 +34,6 @@ ACPI_MODULE_NAME("cm_sbs"); #define ACPI_AC_CLASS "ac_adapter" #define ACPI_BATTERY_CLASS "battery" -#define ACPI_SBS_COMPONENT 0x00080000 #define _COMPONENT ACPI_SBS_COMPONENT static struct proc_dir_entry *acpi_ac_dir; static struct proc_dir_entry *acpi_battery_dir; diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 134818b..17020c1 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -41,7 +41,6 @@ #define INSTALL_NOTIFY_HANDLER 1 #define UNINSTALL_NOTIFY_HANDLER 2 -#define ACPI_CONTAINER_COMPONENT 0x01000000 #define _COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MODULE_NAME("container"); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60d54d1..eaaee16 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -34,7 +34,6 @@ #include #include -#define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_FAN_CLASS "fan" #define ACPI_FAN_FILE_STATE "state" diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e5..81f583f 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -44,9 +44,8 @@ #include #include -#define _COMPONENT ACPI_POWER_COMPONENT +#define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("power"); -#define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_POWER_CLASS "power_resource" #define ACPI_POWER_DEVICE_NAME "Power Resource" #define ACPI_POWER_FILE_INFO "info" diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f..105e0ff 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 81b40ed..5f8d746 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dbcf260..0d7b772 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -44,9 +44,9 @@ #endif #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" #define _COMPONENT ACPI_PROCESSOR_COMPONENT diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index ef34b18..b1eb376 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -40,7 +40,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 3da2df9..a0c38c9 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -38,9 +38,9 @@ #include #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae9..a6da1d9 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -47,7 +47,6 @@ #include #include -#define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bf0c26a..a3aad30 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -41,7 +41,6 @@ #include #include -#define ACPI_VIDEO_COMPONENT 0x08000000 #define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index b3c40dc..8778a3a 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -32,7 +32,19 @@ #define ACPI_MAX_STRING 80 #define ACPI_BUS_COMPONENT 0x00010000 +#define ACPI_AC_COMPONENT 0x00020000 +#define ACPI_BATTERY_COMPONENT 0x00040000 +#define ACPI_BUTTON_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_FAN_COMPONENT 0x00200000 +#define ACPI_PCI_COMPONENT 0x00400000 +#define ACPI_POWER_COMPONENT 0x00800000 +#define ACPI_CONTAINER_COMPONENT 0x01000000 +#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 +#define ACPI_THERMAL_COMPONENT 0x04000000 +#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x08000000 /* * _HID definitions @@ -54,7 +66,6 @@ PCI -------------------------------------------------------------------------- */ -#define ACPI_PCI_COMPONENT 0x00400000 /* ACPI PCI Interrupt Link (pci_link.c) */ -- cgit v0.10.2 From 44342f9e8dfbe8c0fadf940bf6b5c2eaaffe6850 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:50 -0700 Subject: ACPI: fix conflicting component definitions Some of the component definitions that were previous scattered around the drivers conflict with each other. That doesn't hurt anything except that setting one bit in the debug_layer mask would turn on debugging in two different modules. This patch fixes the conflicts. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 8778a3a..414a6cc 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -35,16 +35,16 @@ #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BUTTON_COMPONENT 0x00080000 -#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00100000 #define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_PCI_COMPONENT 0x00400000 #define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_CONTAINER_COMPONENT 0x01000000 -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 #define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 -#define ACPI_VIDEO_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x10000000 +#define ACPI_PROCESSOR_COMPONENT 0x20000000 /* * _HID definitions -- cgit v0.10.2 From bdd7279919f682da8752fb47784a1ee302f8b7ea Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:55 -0700 Subject: ACPI: add driver component definitions to sysfs debug_layers /sys/module/acpi/parameters/debug_layers used to contain only the debug layers defined by the ACPI CA. This patch adds the additional layer definitions for ACPI drivers. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index abf36b4..c483968 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = { ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER), ACPI_DEBUG_INIT(ACPI_COMPILER), ACPI_DEBUG_INIT(ACPI_TOOLS), + + ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_AC_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT), + ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT), + ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT), + ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT), + ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT), }; static const struct acpi_dlevel acpi_debug_levels[] = { diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 414a6cc..e6e9020 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -31,6 +31,10 @@ #define ACPI_MAX_STRING 80 +/* + * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt + * if you add to this list. + */ #define ACPI_BUS_COMPONENT 0x00010000 #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 -- cgit v0.10.2 From 87b586088ef953c602680e5aff8ab83a2e299498 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:00 -0700 Subject: ACPI: turn off all debug output by default When CONFIG_ACPI_DEBUG=y, the default acpi_dbg_layer and acpi_dbg_level values built into the ACPI CA have some debug output enabled. We'd rather be quiet unless the user actually specified the acpi.debug_level argument. This enables distros to ship with CONFIG_ACPI_DEBUG=y without inundating users with debug output. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 765fd1c..7edf6d9 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,6 +688,14 @@ void __init acpi_early_init(void) if (acpi_disabled) return; + /* + * ACPI CA initializes acpi_dbg_level to non-zero, which means + * we get debug output merely by turning on CONFIG_ACPI_DEBUG. + * Turn it off so we don't get output unless the user specifies + * acpi.debug_level. + */ + acpi_dbg_level = 0; + printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ -- cgit v0.10.2 From a0d84a92df43b7206b9c1330a2cccf109cf0a41a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:05 -0700 Subject: ACPI: update debug parameter documentation Reformat acpi.debug_layer and acpi.debug_level documentation so it's more readable, add some clues about how to figure out the mask bits that enable a specific ACPI_DEBUG_PRINT statement, and include some useful examples. Move the list of masks to Documentation/acpi/debug.txt (these are copies of the authoritative values in acoutput.h and acpi_drivers.h). Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt new file mode 100644 index 0000000..65bf47c --- /dev/null +++ b/Documentation/acpi/debug.txt @@ -0,0 +1,148 @@ + ACPI Debug Output + + +The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug +output. This document describes how to use this facility. + +Compile-time configuration +-------------------------- + +ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG. If this config +option is turned off, the debug messages are not even built into the +kernel. + +Boot- and run-time configuration +-------------------------------- + +When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages +you're interested in. At boot-time, use the acpi.debug_layer and +acpi.debug_level kernel command line options. After boot, you can use the +debug_layer and debug_level files in /sys/module/acpi/parameters/ to control +the debug messages. + +debug_layer (component) +----------------------- + +The "debug_layer" is a mask that selects components of interest, e.g., a +specific driver or part of the ACPI interpreter. To build the debug_layer +bitmask, look for the "#define _COMPONENT" in an ACPI source file. + +You can set the debug_layer mask at boot-time using the acpi.debug_layer +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_layer. + +The possible components are defined in include/acpi/acoutput.h and +include/acpi/acpi_drivers.h. Reading /sys/module/acpi/parameters/debug_layer +shows the supported mask values, currently these: + + ACPI_UTILITIES 0x00000001 + ACPI_HARDWARE 0x00000002 + ACPI_EVENTS 0x00000004 + ACPI_TABLES 0x00000008 + ACPI_NAMESPACE 0x00000010 + ACPI_PARSER 0x00000020 + ACPI_DISPATCHER 0x00000040 + ACPI_EXECUTER 0x00000080 + ACPI_RESOURCES 0x00000100 + ACPI_CA_DEBUGGER 0x00000200 + ACPI_OS_SERVICES 0x00000400 + ACPI_CA_DISASSEMBLER 0x00000800 + ACPI_COMPILER 0x00001000 + ACPI_TOOLS 0x00002000 + ACPI_BUS_COMPONENT 0x00010000 + ACPI_AC_COMPONENT 0x00020000 + ACPI_BATTERY_COMPONENT 0x00040000 + ACPI_BUTTON_COMPONENT 0x00080000 + ACPI_SBS_COMPONENT 0x00100000 + ACPI_FAN_COMPONENT 0x00200000 + ACPI_PCI_COMPONENT 0x00400000 + ACPI_POWER_COMPONENT 0x00800000 + ACPI_CONTAINER_COMPONENT 0x01000000 + ACPI_SYSTEM_COMPONENT 0x02000000 + ACPI_THERMAL_COMPONENT 0x04000000 + ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 + ACPI_VIDEO_COMPONENT 0x10000000 + ACPI_PROCESSOR_COMPONENT 0x20000000 + +debug_level +----------- + +The "debug_level" is a mask that selects different types of messages, e.g., +those related to initialization, method execution, informational messages, etc. +To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT() +statement. + +The ACPI interpreter uses several different levels, but the Linux +ACPI core and ACPI drivers generally only use ACPI_LV_INFO. + +You can set the debug_level mask at boot-time using the acpi.debug_level +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_level. + +The possible levels are defined in include/acpi/acoutput.h. Reading +/sys/module/acpi/parameters/debug_level shows the supported mask values, +currently these: + + ACPI_LV_INIT 0x00000001 + ACPI_LV_DEBUG_OBJECT 0x00000002 + ACPI_LV_INFO 0x00000004 + ACPI_LV_INIT_NAMES 0x00000020 + ACPI_LV_PARSE 0x00000040 + ACPI_LV_LOAD 0x00000080 + ACPI_LV_DISPATCH 0x00000100 + ACPI_LV_EXEC 0x00000200 + ACPI_LV_NAMES 0x00000400 + ACPI_LV_OPREGION 0x00000800 + ACPI_LV_BFIELD 0x00001000 + ACPI_LV_TABLES 0x00002000 + ACPI_LV_VALUES 0x00004000 + ACPI_LV_OBJECTS 0x00008000 + ACPI_LV_RESOURCES 0x00010000 + ACPI_LV_USER_REQUESTS 0x00020000 + ACPI_LV_PACKAGE 0x00040000 + ACPI_LV_ALLOCATIONS 0x00100000 + ACPI_LV_FUNCTIONS 0x00200000 + ACPI_LV_OPTIMIZATIONS 0x00400000 + ACPI_LV_MUTEX 0x01000000 + ACPI_LV_THREADS 0x02000000 + ACPI_LV_IO 0x04000000 + ACPI_LV_INTERRUPTS 0x08000000 + ACPI_LV_AML_DISASSEMBLE 0x10000000 + ACPI_LV_VERBOSE_INFO 0x20000000 + ACPI_LV_FULL_TABLES 0x40000000 + ACPI_LV_EVENTS 0x80000000 + +Examples +-------- + +For example, drivers/acpi/bus.c contains this: + + #define _COMPONENT ACPI_BUS_COMPONENT + ... + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n")); + +To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer +and the ACPI_LV_INFO bit in acpi.debug_level. (The ACPI_DEBUG_PRINT +statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO +definition.) + +Enable all AML "Debug" output (stores to the Debug object while interpreting +AML) during boot: + + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + +Enable PCI and PCI interrupt routing debug messages: + + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + +Enable all ACPI hardware-related messages: + + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + +Enable all ACPI_DB_INFO messages after boot: + + # echo 0x4 > /sys/module/acpi/parameters/debug_level + +Show all valid component values: + + # cat /sys/module/acpi/parameters/debug_layer diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 343e0f0..e895111 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,59 +198,30 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET - acpi.debug_layer= [HW,ACPI] + acpi.debug_layer= [HW,ACPI,ACPI_DEBUG] + acpi.debug_level= [HW,ACPI,ACPI_DEBUG] Format: - Each bit of the indicates an ACPI debug layer, - 1: enable, 0: disable. It is useful for boot time - debugging. After system has booted up, it can be set - via /sys/module/acpi/parameters/debug_layer. - CONFIG_ACPI_DEBUG must be enabled for this to produce any output. - Available bits (add the numbers together) to enable debug output - for specific parts of the ACPI subsystem: - 0x01 utilities 0x02 hardware 0x04 events 0x08 tables - 0x10 namespace 0x20 parser 0x40 dispatcher - 0x80 executer 0x100 resources 0x200 acpica debugger - 0x400 os services 0x800 acpica disassembler. - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. - - acpi.debug_level= [HW,ACPI] - Format: - Each bit of the indicates an ACPI debug level, - which corresponds to the level in an ACPI_DEBUG_PRINT - statement. After system has booted up, this mask - can be set via /sys/module/acpi/parameters/debug_level. - - CONFIG_ACPI_DEBUG must be enabled for this to produce - any output. The number can be in decimal or prefixed - with 0x in hex. Some of these options produce so much - output that the system is unusable. - - The following global components are defined by the - ACPI CA: - 0x01 error - 0x02 warn - 0x04 init - 0x08 debug object - 0x10 info - 0x20 init names - 0x40 parse - 0x80 load - 0x100 dispatch - 0x200 execute - 0x400 names - 0x800 operation region - 0x1000 bfield - 0x2000 tables - 0x4000 values - 0x8000 objects - 0x10000 resources - 0x20000 user requests - 0x40000 package - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. + CONFIG_ACPI_DEBUG must be enabled to produce any ACPI + debug output. Bits in debug_layer correspond to a + _COMPONENT in an ACPI source file, e.g., + #define _COMPONENT ACPI_PCI_COMPONENT + Bits in debug_level correspond to a level in + ACPI_DEBUG_PRINT statements, e.g., + ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... + See Documentation/acpi/debug.txt for more information + about debug layers and levels. + + Enable AML "Debug" output, i.e., stores to the Debug + object while interpreting AML: + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + Enable all messages related to ACPI hardware: + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + + Some values produce so much output that the system is + unusable. The "log_buf_len" parameter may be useful + if you need to capture more output. acpi.power_nocheck= [HW,ACPI] Format: 1/0 enable/disable the check of power state. diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 90cb2a8..b0243fd 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -312,9 +312,13 @@ config ACPI_DEBUG bool "Debug Statements" default n help - The ACPI driver can optionally report errors with a great deal - of verbosity. Saying Y enables these statements. This will increase - your kernel size by around 50K. + The ACPI subsystem can produce debug output. Saying Y enables this + output and increases the kernel size by around 50K. + + Use the acpi.debug_layer and acpi.debug_level kernel command-line + parameters documented in Documentation/acpi/debug.txt and + Documentation/kernel-parameters.txt to control the type and + amount of debug output. config ACPI_DEBUG_FUNC_TRACE bool "Additionally enable ACPI function tracing" -- cgit v0.10.2 From a1a8d334f9e8c89a15bba8f34e443a37c29079c3 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 31 Jul 2008 23:02:28 +0200 Subject: Delete an unwanted return statement at evgpe.c Len's tree branch release-2.6.27, found an unwanted return statement at evgpe.c. (git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 release-2.6.27) Signed-of-by Lin Ming Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index c5e53aa..f45c74f 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); - - return_ACPI_STATUS(AE_OK); } /******************************************************************************* -- cgit v0.10.2 From 22c13f9d8179f4c9caecfcb60a95214562b9addc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:54 +0200 Subject: ACPI: video: Ignore devices that aren't present in hardware This is a reimplemention of commit 0119509c4fbc9adcef1472817fda295334612976 from Matthew Garrett This patch got removed because of a regression: ThinkPads with a Intel graphics card and an Integrated Graphics Device BIOS implementation stopped working. In fact, they only worked because the ACPI device of the discrete, the wrong one, got used (via int10). So ACPI functions were poking on the wrong hardware used which is a sever bug. The next patch provides support for above ThinkPads to be able to switch brightness via the legacy thinkpad_acpi driver and automatically detect when to use it. Original commit message from Matthew Garrett: Vendors often ship machines with a choice of integrated or discrete graphics, and use the same DSDT for both. As a result, the ACPI video module will locate devices that may not exist on this specific platform. Attempt to determine whether the device exists or not, and abort the device creation if it doesn't. http://bugzilla.kernel.org/show_bug.cgi?id=9614 Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 24649ad..adec3d1 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); +/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge + * This should work in general, but did not on a Lenovo T61 for the + * graphics card. But this must be fixed when the PCI device is + * bound and the kernel device struct is attached to the acpi device + * Note: A success call will increase reference count by one + * Do call put_device(dev) on the returned device then + */ +struct device *acpi_get_physical_pci_device(acpi_handle handle) +{ + struct device *dev; + long long device_id; + acpi_status status; + + status = + acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); + + if (ACPI_FAILURE(status)) + return NULL; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(handle, &phandle)) + return NULL; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return NULL; + return dev; +} +EXPORT_SYMBOL(acpi_get_physical_pci_device); + static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0cc..6597c2a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -842,11 +842,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + struct device *dev; if (!video) return -EINVAL; + dev = acpi_get_physical_pci_device(video->device->handle); + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 54a279e4..e9f6574 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -380,6 +380,8 @@ struct acpi_bus_type { int register_acpi_bus_type(struct acpi_bus_type *); int unregister_acpi_bus_type(struct acpi_bus_type *); struct device *acpi_get_physical_device(acpi_handle); +struct device *acpi_get_physical_pci_device(acpi_handle); + /* helper */ acpi_handle acpi_get_child(acpi_handle, acpi_integer); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); -- cgit v0.10.2 From c3d6de698c84efdbdd3781b7058bcc339ab43da8 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:55 +0200 Subject: ACPI video: if no ACPI backlight support, use vendor drivers If an ACPI graphics device supports backlight brightness functions (cmp. with latest ACPI spec Appendix B), let the ACPI video driver control backlight and switch backlight control off in vendor specific ACPI drivers (asus_acpi, thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi). Currently it is possible to load above drivers and let both poke on the brightness HW registers, the video and vendor specific ACPI drivers -> bad. This patch provides the basic support to check for BIOS capabilities before driver loading time. Driver specific modifications are in separate follow up patches. "acpi_backlight=vendor" Prever vendor driver over ACPI driver for backlight. "acpi_backlight=video" (default) Prever ACPI driver over vendor driver for backlight. Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c86c074..dd5013f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,6 +198,18 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET + acpi_backlight= [HW,ACPI] + acpi_backlight=vendor + acpi_backlight=video + If set to vendor, prefer vendor specific driver + (e.g. thinkpad_acpi, sony_acpi, etc.) instead + of the ACPI video.ko driver. + + acpi_display_output= [HW,ACPI] + acpi_display_output=vendor + acpi_display_output=video + See above. + acpi.debug_layer= [HW,ACPI] Format: Each bit of the indicates an ACPI debug layer, diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027..c03810a 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -46,6 +46,10 @@ obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_VIDEO) += video.o +ifdef CONFIG_ACPI_VIDEO +obj-y += video_detect.o +endif + obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e..556b182 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device, } } -static int -acpi_video_bus_match(struct acpi_device *device) -{ - acpi_handle h_dummy; - - if (!device) - return -EINVAL; - - /* Since there is no HID, CID for ACPI Video drivers, we have - * to check well known required nodes for each feature we support. - */ - - /* Does this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - return 0; - - /* Does this device able to retrieve a video ROM ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) - return 0; - - /* Does this device able to configure which video head to be POSTed ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) - return 0; - - return -ENODEV; -} - /* * acpi_bay_match - see if a device is an ejectable driver bay * @@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device, will get autoloaded and the device might still match against another driver. */ - if (ACPI_SUCCESS(acpi_video_bus_match(device))) + if (acpi_is_video_device(device)) cid_add = ACPI_VIDEO_HID; else if (ACPI_SUCCESS(acpi_bay_match(device))) cid_add = ACPI_BAY_HID; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6597c2a..2097c39 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -739,7 +739,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - max_level = acpi_video_init_brightness(device); + if (acpi_video_backlight_support()) + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; @@ -785,18 +786,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - if (device->cap._DCS && device->cap._DSS){ - static int count = 0; - char *name; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); - if (!name) - return; - sprintf(name, "acpi_video%d", count++); - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); + + if (acpi_video_display_switch_support()) { + + if (device->cap._DCS && device->cap._DSS) { + static int count; + char *name; + name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); + if (!name) + return; + sprintf(name, "acpi_video%d", count++); + device->output_dev = video_output_register(name, + NULL, device, &acpi_output_properties); + kfree(name); + } } - return; } /* diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c new file mode 100644 index 0000000..70b1e91a --- /dev/null +++ b/drivers/acpi/video_detect.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2008 SuSE Linux Products GmbH + * Thomas Renninger + * + * May be copied or modified under the terms of the GNU General Public License + * + * video_detect.c: + * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c + * There a Linux specific (Spec does not provide a HID for video devices) is + * assinged + * + * After PCI devices are glued with ACPI devices + * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * devices for which a real graphics card is plugged in + * + * Now acpi_video_get_capabilities() can be called to check which + * capabilities the graphics cards plugged in support. The check for general + * video capabilities will be triggered by the first caller of + * acpi_video_get_capabilities(NULL); which will happen when the first + * backlight (or display output) switching supporting driver calls: + * acpi_video_backlight_support(); + * + * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) + * are available, video.ko should be used to handle the device. + * + * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * sony_acpi,... can take care about backlight brightness and display output + * switching. + * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled, acpi_video_get_capabilities() and + * acpi_video_backlight_support() will always return 0 and vendor specific + * drivers always can handle backlight. + * + */ + +#include +#include + +ACPI_MODULE_NAME("video"); +#define ACPI_VIDEO_COMPONENT 0x08000000 +#define _COMPONENT ACPI_VIDEO_COMPONENT + +static long acpi_video_support; +static bool acpi_video_caps_checked; + +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **retyurn_value) +{ + long *cap = context; + acpi_handle h_dummy; + + if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the device is a video device which can be handled by + * video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(struct acpi_device *device) +{ + acpi_handle h_dummy; + long video_caps = 0; + + if (!device) + return 0; + + /* Does this device able to support video switching ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Does this device able to retrieve a video ROM ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Does this device able to configure which video head to be POSTed ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + +static acpi_status +find_video(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + long *cap = context; + struct device *dev; + struct acpi_device *acpi_dev; + + const struct acpi_device_id video_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, + }; + if (acpi_bus_get_device(handle, &acpi_dev)) + return AE_OK; + + if (!acpi_match_device_ids(acpi_dev, video_ids)) { + dev = acpi_get_physical_pci_device(handle); + if (!dev) + return AE_OK; + put_device(dev); + *cap |= acpi_is_video_device(acpi_dev); + } + return AE_OK; +} + +/* + * Returns the video capabilities of a specific ACPI graphics device + * + * if NULL is passed as argument all ACPI devices are enumerated and + * all graphics capabilities of physically present devices are + * summerized and returned. This is cached and done only once. + */ +long acpi_video_get_capabilities(acpi_handle graphics_handle) +{ + long caps = 0; + struct acpi_device *tmp_dev; + acpi_status status; + + if (acpi_video_caps_checked && graphics_handle == NULL) + return acpi_video_support; + + if (!graphics_handle) { + /* Only do the global walk through all graphics devices once */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + /* There might be boot param flags set already... */ + acpi_video_support |= caps; + acpi_video_caps_checked = 1; + /* Add blacklists here. Be careful to use the right *DMI* bits + * to still be able to override logic via boot params, e.g.: + * + * if (dmi_name_in_vendors("XY")) { + * acpi_video_support |= + * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; + * acpi_video_support |= + * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + *} + */ + } else { + status = acpi_bus_get_device(graphics_handle, &tmp_dev); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); + return 0; + } + acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", + graphics_handle ? caps : acpi_video_support, + graphics_handle ? "on device " : "in general", + graphics_handle ? acpi_device_bid(tmp_dev) : "")); + return caps; +} +EXPORT_SYMBOL(acpi_video_get_capabilities); + +/* Returns true if video.ko can do backlight switching */ +int acpi_video_backlight_support(void) +{ + /* + * We must check whether the ACPI graphics device is physically plugged + * in. Therefore this must be called after binding PCI and ACPI devices + */ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + /* First check for boot param -> highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) + return 1; + + /* Then check for DMI blacklist -> second highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) + return 1; + + /* Then go the default way */ + return acpi_video_support & ACPI_VIDEO_BACKLIGHT; +} +EXPORT_SYMBOL(acpi_video_backlight_support); + +/* + * Returns true if video.ko can do display output switching. + * This does not work well/at all with binary graphics drivers + * which disable system io ranges and do it on their own. + */ +int acpi_video_display_switch_support(void) +{ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) + return 1; + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) + return 1; + + return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; +} +EXPORT_SYMBOL(acpi_video_display_switch_support); + +/* + * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video + * To force that backlight or display output switching is processed by vendor + * specific acpi drivers or video.ko driver. + */ +int __init acpi_backlight(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_backlight=", acpi_backlight); + +int __init acpi_display_output(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_display_output=", acpi_display_output); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452..7f23761 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -194,6 +194,50 @@ extern bool wmi_has_guid(const char *guid); #endif /* CONFIG_ACPI_WMI */ +#define ACPI_VIDEO_OUTPUT_SWITCHING 0x0001 +#define ACPI_VIDEO_DEVICE_POSTING 0x0002 +#define ACPI_VIDEO_ROM_AVAILABLE 0x0004 +#define ACPI_VIDEO_BACKLIGHT 0x0008 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR 0x0010 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO 0x0020 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR 0x0040 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO 0x0080 +#define ACPI_VIDEO_BACKLIGHT_DMI_VENDOR 0x0100 +#define ACPI_VIDEO_BACKLIGHT_DMI_VIDEO 0x0200 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR 0x0400 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO 0x0800 + +#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) + +extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle); +extern long acpi_is_video_device(struct acpi_device *device); +extern int acpi_video_backlight_support(void); +extern int acpi_video_display_switch_support(void); + +#else + +static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle) +{ + return 0; +} + +static inline long acpi_is_video_device(struct acpi_device *device) +{ + return 0; +} + +static inline int acpi_video_backlight_support(void) +{ + return 0; +} + +static inline int acpi_video_display_switch_support(void) +{ + return 0; +} + +#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ + extern int acpi_blacklisted(void); #ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); -- cgit v0.10.2 From febf2d95a71cd594182e4b3defb0e0ffdfe61482 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:56 +0200 Subject: Acer-WMI: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Acked-by: Carlos Corbacho Signed-off-by: Len Brown diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 0532a2d..94c9f911 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void) set_quirks(); + if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + printk(ACER_INFO "Brightness must be controlled by " + "generic video driver\n"); + } + if (platform_driver_register(&acer_platform_driver)) { printk(ACER_ERR "Unable to register platform driver.\n"); goto error_platform_register; -- cgit v0.10.2 From 6766fec3669d5053b987e111afb348b885237bfc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:57 +0200 Subject: asus-acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index a9d5228..8fb8b35 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); - result = asus_backlight_init(dev); - if (result) - goto fail_backlight; + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); result = asus_led_init(dev); if (result) -- cgit v0.10.2 From 29454f17124c655236d2972dad21907e15ca294b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:58 +0200 Subject: compal: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 344b790..11003bb 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -326,12 +326,14 @@ static int __init compal_init(void) /* Register backlight stuff */ - compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, - &compalbl_ops); - if (IS_ERR(compalbl_device)) - return PTR_ERR(compalbl_device); + if (!acpi_video_backlight_support()) { + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); - compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&compal_driver); if (ret) -- cgit v0.10.2 From a2bf8c01048f855fbf65a8fc41460aef71ca39dc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:59 +0200 Subject: eeepc-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 9ef98b2..02fe2b8 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void) return -ENODEV; } dev = acpi_get_physical_device(ehotk->device->handle); - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(EEEPC_INFO "Backlight controlled by ACPI video " + "driver\n"); + result = eeepc_hwmon_init(dev); if (result) goto fail_hwmon; -- cgit v0.10.2 From 7d5c89a615c5dae039094a3cf4a56fe6aab81765 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:00 +0200 Subject: fujitsu-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bf..1070dc1 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -990,16 +990,16 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - max_brightness = fujitsu->max_brightness; - - fujitsu->bl_device->props.max_brightness = max_brightness - 1; - fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + if (!acpi_video_backlight_support()) { + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + max_brightness = fujitsu->max_brightness; + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + } ret = platform_driver_register(&fujitsupf_driver); if (ret) @@ -1035,7 +1035,8 @@ fail_hotkey: fail_backlight: - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); fail_platform_device2: @@ -1062,7 +1063,8 @@ static void __exit fujitsu_cleanup(void) &fujitsupf_attribute_group); platform_device_unregister(fujitsu->pf_device); platform_driver_unregister(&fujitsupf_driver); - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); acpi_bus_unregister_driver(&acpi_fujitsu_driver); -- cgit v0.10.2 From a598c82f39892069a8f6693459b1179fd9ef30e1 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:01 +0200 Subject: msi-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index de898c6..759763d 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -347,12 +347,16 @@ static int __init msi_init(void) /* Register backlight stuff */ - msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_ops); - if (IS_ERR(msibl_device)) - return PTR_ERR(msibl_device); - - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + if (acpi_video_backlight_support()) { + printk(KERN_INFO "MSI: Brightness ignored, must be controlled " + "by ACPI video driver\n"); + } else { + msibl_device = backlight_device_register("msi-laptop-bl", NULL, + NULL, &msibl_ops); + if (IS_ERR(msibl_device)) + return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&msipf_driver); if (ret) -- cgit v0.10.2 From 540b8bb9c33935183ceb5bed466a42ad72b2af56 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:02 +0200 Subject: sony-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 06f07e1..7bcb810 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { + if (!acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + "controlled by ACPI video driver\n"); + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", + &handle))) { sony_backlight_device = backlight_device_register("sony", NULL, NULL, &sony_backlight_ops); -- cgit v0.10.2 From 2dba1b5d87e08a294da5cdfa4d32908000e9b085 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:03 +0200 Subject: thinkpad_acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andi Kleen Signed-off-by: Len Brown diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4db1cf9..7a4a26b 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) */ b = tpacpi_check_std_acpi_brightness_support(); if (b > 0) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - printk(TPACPI_NOTICE - "Lenovo BIOS switched to ACPI backlight " - "control mode\n"); - } - if (brightness_enable > 1) { - printk(TPACPI_NOTICE - "standard ACPI backlight interface " - "available, not loading native one...\n"); - return 1; + + if (acpi_video_backlight_support()) { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface " + "available, not loading native one.\n"); + return 1; + } else if (brightness_enable == 1) { + printk(TPACPI_NOTICE + "Backlight control force enabled, even if standard " + "ACPI backlight interface is available\n"); + } + } else { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); + } } } -- cgit v0.10.2 From 72bc2b1ad62f4d2f0a51b35829093d41f55accce Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 8 Nov 2008 21:15:53 +0100 Subject: [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range Same fix as commit c7cf72dcadb: when 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. Cc: Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 13cdae8..80cd207 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -150,7 +150,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && end & (CACHE_LINE_SIZE - 1)) { l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); } @@ -158,7 +158,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { unsigned long range_end = calc_range_end(start, end); l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE); start = range_end; -- cgit v0.10.2 From 0fded351a7d03fc69484d5a9e655fbd15a8e7dab Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 19:14:56 +0000 Subject: [ARM] realview: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 3e706c5..3347c42 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -104,7 +104,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v0.10.2 From 7bfc0b2e266dd4cd3d3f27a3ad31bf79974190b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 20:12:36 +0000 Subject: [ARM] versatile: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index 9336508..58937f1 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -105,7 +105,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v0.10.2 From ebb4c65869db7213280ad9c510637683939b5ff8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 9 Nov 2008 11:18:36 +0000 Subject: [ARM] iop: iop3xx needs registers mapped uncached+unbuffered Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index cb1139a..39d949b 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -19,12 +19,13 @@ struct map_desc { }; /* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 +#define MT_UNCACHED 4 +#define MT_CACHECLEAN 5 +#define MT_MINICLEAN 6 +#define MT_LOW_VECTORS 7 +#define MT_HIGH_VECTORS 8 +#define MT_MEMORY 9 +#define MT_ROM 10 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e63db11..7f36c82 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -208,6 +208,12 @@ static struct mem_type mem_types[] = { .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, + [MT_UNCACHED] = { + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, + .domain = DOMAIN_IO, + }, [MT_CACHECLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 4689db6..9e573e7 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -16,14 +16,15 @@ #include /* - * Standard IO mapping for all IOP3xx based systems + * Standard IO mapping for all IOP3xx based systems. Note that + * the IOP3xx OCCDR must be mapped uncached and unbuffered. */ static struct map_desc iop3xx_std_desc[] __initdata = { { /* mem mapped registers */ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, - .type = MT_DEVICE, + .type = MT_UNCACHED, }, { /* PCI IO space */ .virtual = IOP3XX_PCI_LOWER_IO_VA, .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), -- cgit v0.10.2 From 980fc29f20f5cfb8cef29ddfccecb685f299ada4 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 6 Nov 2008 11:44:34 +0100 Subject: pcmcia: add another pata/ide ID Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat Signed-off-by: Dominik Brodowski CC: Alan Cox Date: Sun, 9 Nov 2008 21:47:47 +0100 Subject: pcmcia: ensure correct logging in do_io_probe Signed-off-by: Dominik Brodowski diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 5d0e60e..0660ad1 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) spin_lock_init(&socket->lock); - if (socket->resource_ops->init) { - ret = socket->resource_ops->init(socket); - if (ret) - return (ret); - } - /* try to obtain a socket number [yes, it gets ugly if we * register more than 2^sizeof(unsigned int) pcmcia * sockets... but the socket number is deprecated @@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) mutex_init(&socket->skt_mutex); spin_lock_init(&socket->thread_lock); + if (socket->resource_ops->init) { + ret = socket->resource_ops->init(socket); + if (ret) + goto err; + } + tsk = kthread_run(pccardd, socket, "pccardd"); if (IS_ERR(tsk)) { ret = PTR_ERR(tsk); -- cgit v0.10.2 From acca4f4d9bd657e8bc7e1665ba5077465138f133 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Nov 2008 20:00:45 +0900 Subject: sh: Handle fixmap TLB eviction more coherently. There was a race in the kmap_coherent() implementation. While we guarded against preemption, there was nothing preventing eviction of the pre-faulted fixmap entry from the UTLB. Under certain workloads this would result in the fixmap entries used for cache colouring being evicted from the UTLB in the midst of a copy_page(). In addition to pre-faulting, we also make sure to preserve the PTEs in the kernel page table and introduce a cached PTE for kmap_coherent() usage. This follows a similar change on MIPS ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"). Reported-by: Hideo Saito Reported-by: CHIKAMA Masaki Tested-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 52220d7..b517ae0 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -148,6 +148,12 @@ extern void paging_init(void); extern void page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd); +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_CPU_SH4) && defined(CONFIG_MMU) +extern void kmap_coherent_init(void); +#else +#define kmap_coherent_init() do { } while (0) +#endif + #include #endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4abf000..6cbef8c 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -137,6 +137,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end, void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; + unsigned long vaddr; int nid; /* We don't need to map the kernel through the TLB, as @@ -148,10 +149,15 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); - /* Populate the relevant portions of swapper_pg_dir so that + /* + * Populate the relevant portions of swapper_pg_dir so that * we can use the fixmap entries without calling kmalloc. - * pte's will be filled in by __set_fixmap(). */ - page_table_range_init(FIXADDR_START, FIXADDR_TOP, swapper_pg_dir); + * pte's will be filled in by __set_fixmap(). + */ + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; + page_table_range_init(vaddr, 0, swapper_pg_dir); + + kmap_coherent_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 38870e0..2fe14da 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -7,6 +7,7 @@ * Released under the terms of the GNU GPL v2.0. */ #include +#include #include #include #include @@ -16,6 +17,20 @@ #define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + +static pte_t *kmap_coherent_pte; + +void __init kmap_coherent_init(void) +{ + unsigned long vaddr; + + /* cache the first coherent kmap pte */ + vaddr = __fix_to_virt(FIX_CMAP_BEGIN); + kmap_coherent_pte = kmap_get_fixmap_pte(vaddr); +} + static inline void *kmap_coherent(struct page *page, unsigned long addr) { enum fixed_addresses idx; @@ -34,6 +49,8 @@ static inline void *kmap_coherent(struct page *page, unsigned long addr) update_mmu_cache(NULL, vaddr, pte); + set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte); + return (void *)vaddr; } -- cgit v0.10.2 From 8c2f5fa51e1b22db53acf4f3918b6f590b4a35a1 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 10 Nov 2008 13:58:41 +0100 Subject: myri10ge: fix stop/go ordering even more The doorbell writes may be seen out of order by the firmware if they are in WC memory since the tx spin(un)lock does not flush WC writes. Hence if the "stop" is written on a different CPU than the "go", it is possible that the stop will arrive after the go unless we add an explicit memory barrier (and mmiowb() is not enough). It fixes transmit hangs in multi tx queue mode. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428b..b378670 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; -- cgit v0.10.2 From 9f64306b8a3949b74cb11d3b2f613e8a2af20fa6 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:28 -0800 Subject: cxgb3 - eeprom read fixes Protect against invalid phy entries in the eeprom. Extend eeprom access timeout. Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64b..9a0898b 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) -- cgit v0.10.2 From f9ee3882969224aa9f086268020c31819be6ae99 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:33 -0800 Subject: cxgb3 - Limit multiqueue setting to msi-x Allow multiqueue setting in MSI-X mode only Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a..f66367e 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2699,7 +2699,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) -- cgit v0.10.2 From cf3760dad576c8dfb4fef4b8a8a08a027bf02583 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 6 Nov 2008 17:06:42 -0600 Subject: RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff980..160ef482 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index f66367e..2c341f8 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v0.10.2 From 347c8d83cd9f546a8357e1ab12fa6867707975d8 Mon Sep 17 00:00:00 2001 From: "Dasgupta, Romit" Date: Thu, 6 Nov 2008 15:46:18 +0530 Subject: [netdrvr] smc911x: fix for driver resume (and compilation warning) I am trying out suspend, resume on an OMAP3 based board. What I see during resume is that the SMC911x driver resume routing gets stuck after trying to transmit the packet out of the controller. Some debug messages below: --> smc911x_drv_resume eth0: --> smc911x_reset eth0: smc911x_reset timeout waiting for PM restore eth0: --> smc911x_enable eth0: --> smc911x_phy_configure() eth0: --> smc911x_phy_reset() eth0: phy caps=0x782d eth0: phy advertised caps=0x0de1 eth0: --> smc911x_phy_check_media smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 eth0: link down Restarting tasks ... eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt nfs: server 172.24.190.217 not responding, still trying nfs: server 172.24.190.217 not responding, still trying The following change makes it work fine: (The change within smc911x_drv_probe function was to get rid of a compilation warning). Signed-off-by: Romit Dasgupta Signed-off-by: Jeff Garzik diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554..1f26ab0 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } -- cgit v0.10.2 From 355a0ec471377a8a907b79c8fba3f0f09b44656e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:46:19 +0100 Subject: ALSA: hda - Add missing analog-mux mixer creation for STAC9200 The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index e608591..1627756 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3530,6 +3530,12 @@ static int stac9200_parse_auto_config(struct hda_codec *codec) if ((err = stac9200_auto_create_lfe_ctls(codec, &spec->autocfg)) < 0) return err; + if (spec->num_muxes > 0) { + err = stac92xx_auto_create_mux_input_ctls(codec); + if (err < 0) + return err; + } + if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = 0x05; if (spec->autocfg.dig_in_pin) -- cgit v0.10.2 From 4f1e6bc3646ab50b8181555ab7e6eeab68b8632a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:47:24 +0100 Subject: ALSA: hda - Fix input pin initialization for STAC/IDT codecs The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code. Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin. Reference: Novell bnc#443738 https://bugzilla.novell.com/show_bug.cgi?id=443738 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1627756..a511601 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3653,14 +3653,18 @@ static int stac92xx_init(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = cfg->input_pins[i]; if (nid) { - unsigned int pinctl = snd_hda_codec_read(codec, nid, - 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - /* if PINCTL already set then skip */ - if (pinctl & AC_PINCAP_IN) - continue; - pinctl = AC_PINCTL_IN_EN; - if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) - pinctl |= stac92xx_get_vref(codec, nid); + unsigned int pinctl; + if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) { + /* for mic pins, force to initialize */ + pinctl = stac92xx_get_vref(codec, nid); + } else { + pinctl = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + /* if PINCTL already set then skip */ + if (pinctl & AC_PINCTL_IN_EN) + continue; + } + pinctl |= AC_PINCTL_IN_EN; stac92xx_auto_set_pinctl(codec, nid, pinctl); } } -- cgit v0.10.2 From c41ef344de212bd918f7765af21b5008628c03e0 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 28 Oct 2008 18:16:58 -0200 Subject: KVM: MMU: increase per-vcpu rmap cache alloc size The page fault path can use two rmap_desc structures, if: - walk_addr's dirty pte update allocates one rmap_desc. - mmu_lock is dropped, sptes are zapped resulting in rmap_desc being freed. - fetch->mmu_set_spte allocates another rmap_desc. Increase to 4 for safety. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a5e648..f1983d9 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -314,7 +314,7 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu) if (r) goto out; r = mmu_topup_memory_cache(&vcpu->arch.mmu_rmap_desc_cache, - rmap_desc_cache, 1); + rmap_desc_cache, 4); if (r) goto out; r = mmu_topup_memory_cache_page(&vcpu->arch.mmu_page_cache, 8); -- cgit v0.10.2 From a2e4e28946c2c282a040ba4945c8f7288de69118 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Thu, 23 Oct 2008 15:02:52 +0800 Subject: KVM: ia64: Use guest signal mask when blocking Before a vcpu blocks, it should switch to the guest signal mask to allow signals to unblock it. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 3caac47..af1464f 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -673,16 +673,16 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu_load(vcpu); + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); + if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) { kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); - vcpu_put(vcpu); - return -EAGAIN; + r = -EAGAIN; + goto out; } - if (vcpu->sigset_active) - sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - if (vcpu->mmio_needed) { memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8); kvm_set_mmio_data(vcpu); @@ -690,7 +690,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu->mmio_needed = 0; } r = __vcpu_run(vcpu, kvm_run); - +out: if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &sigsaved, NULL); -- cgit v0.10.2 From a29a2af378f3f6362b68e126e2541c8bde885ead Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 29 Oct 2008 14:13:39 -0700 Subject: x86: KVM guest: fix section mismatch warning in kvmclock.c WARNING: arch/x86/kernel/built-in.o(.text+0x1722c): Section mismatch in reference from the function kvm_setup_secondary_clock() to the function .devinit.text:setup_secondary_APIC_clock() The function kvm_setup_secondary_clock() references the function __devinit setup_secondary_APIC_clock(). This is often because kvm_setup_secondary_clock lacks a __devinit annotation or the annotation of setup_secondary_APIC_clock is wrong. Signed-off-by: Md.Rakib H. Mullick Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Avi Kivity diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 774ac49..1c9cc43 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt) } #ifdef CONFIG_X86_LOCAL_APIC -static void kvm_setup_secondary_clock(void) +static void __devinit kvm_setup_secondary_clock(void) { /* * Now that the first cpu already had this clocksource initialized, -- cgit v0.10.2 From ca93e992fdfdc6569ac2845d7560eeb5de4a4e0b Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 4 Nov 2008 11:25:17 +0200 Subject: KVM: Require the PCI subsystem PCI device assignment makes calls to pci code, so require it to be built into the kernel. Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig index 8e99fed..f833a0b 100644 --- a/arch/ia64/kvm/Kconfig +++ b/arch/ia64/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM && EXPERIMENTAL + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select ANON_INODES ---help--- diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index ce3251c..b81125f 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select MMU_NOTIFIER select ANON_INODES -- cgit v0.10.2 From 928d4bf747e9c290b690ff515d8f81e8ee226d97 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 6 Nov 2008 14:55:45 +0800 Subject: KVM: VMX: Set IGMT bit in EPT entry There is a potential issue that, when guest using pagetable without vmexit when EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory, which would be inconsistent with host side and would cause host MCE due to inconsistent cache attribute. The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default memory type to protect host (notice that all memory mapped by KVM should be WB). Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2643b43..d06b4dc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3564,7 +3564,8 @@ static int __init vmx_init(void) bypass_guest_pf = 0; kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | VMX_EPT_WRITABLE_MASK | - VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); + VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT | + VMX_EPT_IGMT_BIT); kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull, VMX_EPT_EXECUTABLE_MASK); kvm_enable_tdp(); diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 3e010d2..ec5edc3 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -352,6 +352,7 @@ enum vmcs_field { #define VMX_EPT_READABLE_MASK 0x1ull #define VMX_EPT_WRITABLE_MASK 0x2ull #define VMX_EPT_EXECUTABLE_MASK 0x4ull +#define VMX_EPT_IGMT_BIT (1ull << 6) #define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul -- cgit v0.10.2 From c60ff51eb26dfcfb0bdc807b09a096aeadd01325 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Sat, 8 Nov 2008 15:46:59 +0800 Subject: KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP In the case of !CONFIG_SMP, raw_spinlock_t is empty and the spinlock functions don't build. Fix by defining spinlock functions for the uniprocessor case. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 341e3fe..e9b2a4e 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -384,6 +384,10 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define MODE_IND(psr) \ (((psr).it << 2) + ((psr).dt << 1) + (psr).rt) +#ifndef CONFIG_SMP +#define _vmm_raw_spin_lock(x) do {}while(0) +#define _vmm_raw_spin_unlock(x) do {}while(0) +#else #define _vmm_raw_spin_lock(x) \ do { \ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ @@ -403,6 +407,7 @@ static inline u64 __gpfn_is_io(u64 gpfn) do { barrier(); \ ((spinlock_t *)x)->raw_lock.lock = 0; } \ while (0) +#endif void vmm_spin_lock(spinlock_t *lock); void vmm_spin_unlock(spinlock_t *lock); -- cgit v0.10.2 From e17d1dc0863767bab8fde4ba9be92c7f79e7fe50 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 11 Nov 2008 13:09:36 +0200 Subject: KVM: Fix pit memory leak if unable to allocate irq source id MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-By: Daniel Marjamäki Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 8772dc9..59ebd37 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -548,8 +548,10 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm) mutex_lock(&kvm->lock); pit->irq_source_id = kvm_request_irq_source_id(kvm); mutex_unlock(&kvm->lock); - if (pit->irq_source_id < 0) + if (pit->irq_source_id < 0) { + kfree(pit); return NULL; + } mutex_init(&pit->pit_state.lock); mutex_lock(&pit->pit_state.lock); -- cgit v0.10.2 From a358324466b171e145df20bdb74fe81759906de6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 11 Nov 2008 15:01:42 -0500 Subject: ring-buffer: buffer record on/off switch Impact: enable/disable ring buffer recording API added Several kernel developers have requested that there be a way to stop recording into the ring buffers with a simple switch that can also be enabled from userspace. This patch addes a new kernel API to the ring buffers called: tracing_on() tracing_off() When tracing_off() is called, all ring buffers will not be able to record into their buffers. tracing_on() will enable the ring buffers again. These two act like an on/off switch. That is, there is no counting of the number of times tracing_off or tracing_on has been called. A new file is added to the debugfs/tracing directory called tracing_on This allows for userspace applications to also flip the switch. echo 0 > debugfs/tracing/tracing_on disables the tracing. echo 1 > /debugfs/tracing/tracing_on enables it. Note, this does not disable or enable any tracers. It only sets or clears a flag that needs to be set in order for the ring buffers to write to their buffers. It is a global flag, and affects all ring buffers. The buffers start out with tracing_on enabled. There are now three flags that control recording into the buffers: tracing_on: which affects all ring buffer tracers. buffer->record_disabled: which affects an allocated buffer, which may be set if an anomaly is detected, and tracing is disabled. cpu_buffer->record_disabled: which is set by tracing_stop() or if an anomaly is detected. tracing_start can not reenable this if an anomaly occurred. The userspace debugfs/tracing/tracing_enabled is implemented with tracing_stop() but the user space code can not enable it if the kernel called tracing_stop(). Userspace can enable the tracing_on even if the kernel disabled it. It is just a switch used to stop tracing if a condition was hit. tracing_on is not for protecting critical areas in the kernel nor is it for stopping tracing if an anomaly occurred. This is because userspace can reenable it at any time. Side effect: With this patch, I discovered a dead variable in ftrace.c called tracing_on. This patch removes it. Signed-off-by: Steven Rostedt diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 536b0ca..e097c2e 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -120,6 +120,9 @@ unsigned long ring_buffer_overruns(struct ring_buffer *buffer); u64 ring_buffer_time_stamp(int cpu); void ring_buffer_normalize_time_stamp(int cpu, u64 *ts); +void tracing_on(void); +void tracing_off(void); + enum ring_buffer_flags { RB_FL_OVERWRITE = 1 << 0, }; diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4a39d24..14fa522 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -185,7 +185,6 @@ enum { }; static int ftrace_filtered; -static int tracing_on; static LIST_HEAD(ftrace_new_addrs); @@ -506,13 +505,10 @@ static int __ftrace_modify_code(void *data) { int *command = data; - if (*command & FTRACE_ENABLE_CALLS) { + if (*command & FTRACE_ENABLE_CALLS) ftrace_replace_code(1); - tracing_on = 1; - } else if (*command & FTRACE_DISABLE_CALLS) { + else if (*command & FTRACE_DISABLE_CALLS) ftrace_replace_code(0); - tracing_on = 0; - } if (*command & FTRACE_UPDATE_TRACE_FUNC) ftrace_update_ftrace_func(ftrace_trace_function); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 2f76193..b08ee9f 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -16,6 +16,35 @@ #include #include +#include "trace.h" + +/* Global flag to disable all recording to ring buffers */ +static int ring_buffers_off __read_mostly; + +/** + * tracing_on - enable all tracing buffers + * + * This function enables all tracing buffers that may have been + * disabled with tracing_off. + */ +void tracing_on(void) +{ + ring_buffers_off = 0; +} + +/** + * tracing_off - turn off all tracing buffers + * + * This function stops all tracing buffers from recording data. + * It does not disable any overhead the tracers themselves may + * be causing. This function simply causes all recording to + * the ring buffers to fail. + */ +void tracing_off(void) +{ + ring_buffers_off = 1; +} + /* Up this if you want to test the TIME_EXTENTS and normalization */ #define DEBUG_SHIFT 0 @@ -1133,6 +1162,9 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, struct ring_buffer_event *event; int cpu, resched; + if (ring_buffers_off) + return NULL; + if (atomic_read(&buffer->record_disabled)) return NULL; @@ -1249,6 +1281,9 @@ int ring_buffer_write(struct ring_buffer *buffer, int ret = -EBUSY; int cpu, resched; + if (ring_buffers_off) + return -EBUSY; + if (atomic_read(&buffer->record_disabled)) return -EBUSY; @@ -2070,3 +2105,69 @@ int ring_buffer_swap_cpu(struct ring_buffer *buffer_a, return 0; } +static ssize_t +rb_simple_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + int r; + + /* !ring_buffers_off == tracing_on */ + r = sprintf(buf, "%d\n", !*p); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +rb_simple_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; + + /* !ring_buffers_off == tracing_on */ + *p = !val; + + (*ppos)++; + + return cnt; +} + +static struct file_operations rb_simple_fops = { + .open = tracing_open_generic, + .read = rb_simple_read, + .write = rb_simple_write, +}; + + +static __init int rb_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + + entry = debugfs_create_file("tracing_on", 0644, d_tracer, + &ring_buffers_off, &rb_simple_fops); + if (!entry) + pr_warning("Could not create debugfs 'tracing_on' entry\n"); + + return 0; +} + +fs_initcall(rb_init_debugfs); -- cgit v0.10.2 From 137cb55c6dcd56cb367285adaf15f808a2a9fec7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: add a dummy read to flush next descriptor update The current dummy read references the wrong address allowing the next descriptor address update to linger in the store buffer and get passed by an 'append' event. This issue was uncovered by the change from strongly-ordered to device memory for the adma registers. Signed-off-by: Dan Williams diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 71fba82..95f5a94 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) int slot_cnt; int slots_per_op; dma_cookie_t cookie; + dma_addr_t next_dma; grp_start = sw_desc->group_head; slot_cnt = grp_start->slot_cnt; @@ -425,11 +426,11 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) &old_chain_tail->chain_node); /* fix up the hardware chain */ - iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); + next_dma = grp_start->async_tx.phys; + iop_desc_set_next_desc(old_chain_tail, next_dma); + BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ - /* 1/ don't add pre-chained descriptors - * 2/ dummy read to flush next_desc write - */ + /* check for pre-chained descriptors */ BUG_ON(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots -- cgit v0.10.2 From 65e503814dec83c7b2ac955e75919d009109c919 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: use iop_paranoia() for debug BUG_ONs Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 87bff09..83e6ba3 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -730,7 +730,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, { /* hw_desc->next_desc is the same location for all channels */ union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - BUG_ON(hw_desc.dma->next_desc); + + iop_paranoia(hw_desc.dma->next_desc); hw_desc.dma->next_desc = next_desc_addr; } @@ -760,7 +761,7 @@ static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) struct iop3xx_desc_aau *hw_desc = desc->hw_desc; struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); + iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); return desc_ctrl.zero_result_err; } diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index cb7e361..385c6e8 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -23,6 +23,12 @@ #define IOP_ADMA_SLOT_SIZE 32 #define IOP_ADMA_THRESHOLD 4 +#ifdef DEBUG +#define IOP_PARANOIA 1 +#else +#define IOP_PARANOIA 0 +#endif +#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x)) /** * struct iop_adma_device - internal representation of an ADMA device diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index 60019c8..5722e86 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -404,7 +404,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, u32 next_desc_addr) { struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - BUG_ON(hw_desc->next_desc); + + iop_paranoia(hw_desc->next_desc); hw_desc->next_desc = next_desc_addr; } diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 95f5a94..c7a9306 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -431,7 +431,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ /* check for pre-chained descriptors */ - BUG_ON(iop_desc_get_next_desc(sw_desc)); + iop_paranoia(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots * memcpy operations have a 1:1 (slot:operation) relation -- cgit v0.10.2 From 06190d8415219d9eef7d8f04b52a109e34575a76 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: dmaengine: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Acked-by: Maciej Sosnowski Signed-off-by: Kay Sievers Signed-off-by: Dan Williams diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index dc003a3..5317e08 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device) chan->chan_id = chancnt++; chan->dev.class = &dma_devclass; chan->dev.parent = device->dev; - snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", - device->dev_id, chan->chan_id); + dev_set_name(&chan->dev, "dma%dchan%d", + device->dev_id, chan->chan_id); rc = device_register(&chan->dev); if (rc) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d1e381e..ed9636b 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); -static char test_channel[BUS_ID_SIZE]; +static char test_channel[20]; module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO); MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); -static char test_device[BUS_ID_SIZE]; +static char test_device[20]; module_param_string(device, test_device, sizeof(test_device), S_IRUGO); MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); @@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan) { if (test_channel[0] == '\0') return true; - return strcmp(chan->dev.bus_id, test_channel) == 0; + return strcmp(dev_name(&chan->dev), test_channel) == 0; } static bool dmatest_match_device(struct dma_device *device) { if (test_device[0] == '\0') return true; - return strcmp(device->dev->bus_id, test_device) == 0; + return strcmp(dev_name(device->dev), test_device) == 0; } static unsigned long dmatest_random(void) @@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { - pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); + pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev)); return DMA_NAK; } @@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); break; } thread->chan = dtc->chan; smp_wmb(); thread->task = kthread_run(dmatest_func, thread, "%s-test%u", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); if (IS_ERR(thread->task)) { pr_warning("dmatest: Failed to run thread %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); kfree(thread); break; } @@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) list_add_tail(&thread->node, &dtc->threads); } - pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id); + pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev)); list_add_tail(&dtc->node, &dmatest_channels); nr_channels++; @@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan) list_del(&dtc->node); dmatest_cleanup_channel(dtc); pr_debug("dmatest: lost channel %s\n", - chan->dev.bus_id); + dev_name(&chan->dev)); return DMA_ACK; } } @@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan, default: pr_info("dmatest: Unhandled event %u (%s)\n", - state, chan->dev.bus_id); + state, dev_name(&chan->dev)); break; } -- cgit v0.10.2 From 2485b8674bf5762822e14e1554938e36511c0ae4 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 10 Nov 2008 13:54:43 +0900 Subject: PCI: ignore bit0 of _OSC return code Currently acpi_run_osc() checks all the bits in _OSC result code (the first DWORD in the capabilities buffer) to see error condition. But the bit 0, which doesn't indicate any error, must be ignored. The bit 0 is used as the query flag at _OSC invocation time. Some platforms clear it during _OSC evaluation, but the others don't. On latter platforms, current acpi_run_osc() mis-detects error when _OSC is evaluated with query flag set because it doesn't ignore the bit 0. Because of this, the __acpi_query_osc() always fails on such platforms. And this is the cause of the problem that pci_osc_control_set() doesn't work since the commit 4e39432f4df544d3dfe4fc90a22d87de64d15815 which changed pci_osc_control_set() to use __acpi_query_osc(). Tested-by:"Tomasz Czernecki Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b3a63ed..ae5ec76 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; + u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *)out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) + /* Need to ignore the bit0 in result code */ + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + if (errors & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) + if (errors & OSC_INVALID_UUID_ERROR) printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) + if (errors & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { + if (errors & OSC_CAPABILITIES_MASK_ERROR) { if (flags & OSC_QUERY_ENABLE) goto out_success; printk(KERN_DEBUG "_OSC FW not grant req. control\n"); -- cgit v0.10.2 From 1cfe62c8010ac56e1bd3827e30386a87cc2f3594 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 28 Oct 2008 00:35:30 +0300 Subject: ACPI: EC: revert msleep patch With the better solution for EC interrupt storm issue, there is no need to use msleep over udelay. References: http://bugzilla.kernel.org/show_bug.cgi?id=11810 http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316..3ef5b79 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -239,10 +239,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); - msleep(1); + udelay(ACPI_EC_UDELAY); while (time_before(jiffies, delay)) { gpe_transaction(ec, acpi_ec_read_status(ec)); - msleep(1); + udelay(ACPI_EC_UDELAY); if (ec_transaction_done(ec)) return 0; } -- cgit v0.10.2 From f8248434e6a11d7cd314281be3b39bbcf82fc243 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sat, 1 Nov 2008 11:05:26 +0000 Subject: ACPI: EC: make kernel messages more useful when GPE storm is detected Make sure we can tell if the GPE storm workaround gets activated, and avoid flooding the logs afterwards. http://bugzilla.kernel.org/show_bug.cgi?id=11841 "plenty of line "ACPI: EC: non-query interrupt received, switching to interrupt mode" in dmesg" Signed-off-by: Alan Jenkins Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 3ef5b79..b340e08 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -286,7 +286,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_debug(PREFIX "GPE storm detected\n"); + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } return ret; @@ -566,9 +567,15 @@ static u32 acpi_ec_gpe_handler(void *data) if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) { /* this is non-query, must be confirmation */ - if (printk_ratelimit()) - pr_info(PREFIX "non-query interrupt received," + if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + } else { + /* hush, STORM switches the mode every transaction */ + pr_debug(PREFIX "non-query interrupt received," " switching to interrupt mode\n"); + } set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } return ACPI_INTERRUPT_HANDLED; -- cgit v0.10.2 From dd15f8c42af09031e27da5b4d697ce925511f2e1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Nov 2008 21:42:30 +0300 Subject: ACPI: EC: wait for last write gpe There is a possibility that EC might break if next command is issued within 1 us after write or burst-disable command. Suggestd-by: Zhao Yakui Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b340e08..cebd65d 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -102,6 +102,7 @@ struct transaction { u8 command; u8 wlen; u8 rlen; + bool done; }; static struct acpi_ec { @@ -178,7 +179,7 @@ static int ec_transaction_done(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->curr_lock, flags); - if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen)) + if (!ec->curr || ec->curr->done) ret = 1; spin_unlock_irqrestore(&ec->curr_lock, flags); return ret; @@ -195,17 +196,20 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status) acpi_ec_write_data(ec, *(ec->curr->wdata++)); --ec->curr->wlen; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - + goto err; } else if (ec->curr->rlen > 0) { if ((status & ACPI_EC_FLAG_OBF) == 1) { *(ec->curr->rdata++) = acpi_ec_read_data(ec); - --ec->curr->rlen; + if (--ec->curr->rlen == 0) + ec->curr->done = true; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - } + goto err; + } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + ec->curr->done = true; + goto unlock; +err: + /* false interrupt, state didn't change */ + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } @@ -265,6 +269,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ t->irq_count = 0; + t->done = false; ec->curr = t; acpi_ec_write_cmd(ec, ec->curr->command); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) -- cgit v0.10.2 From a2f93aeadf97e870ff385030633a73e21146815d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 12 Nov 2008 01:40:19 +0300 Subject: ACPI: EC: restart failed command Restart current transaction if we recieved unexpected GPEs instead of needed ones. http://bugzilla.kernel.org/show_bug.cgi?id=11896 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index cebd65d..34c67ca 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -100,6 +100,8 @@ struct transaction { u8 *rdata; unsigned short irq_count; u8 command; + u8 wi; + u8 ri; u8 wlen; u8 rlen; bool done; @@ -185,26 +187,34 @@ static int ec_transaction_done(struct acpi_ec *ec) return ret; } +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->done = false; + acpi_ec_write_cmd(ec, ec->curr->command); +} + static void gpe_transaction(struct acpi_ec *ec, u8 status) { unsigned long flags; spin_lock_irqsave(&ec->curr_lock, flags); if (!ec->curr) goto unlock; - if (ec->curr->wlen > 0) { - if ((status & ACPI_EC_FLAG_IBF) == 0) { - acpi_ec_write_data(ec, *(ec->curr->wdata++)); - --ec->curr->wlen; - } else + if (ec->curr->wlen > ec->curr->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, + ec->curr->wdata[ec->curr->wi++]); + else goto err; - } else if (ec->curr->rlen > 0) { + } else if (ec->curr->rlen > ec->curr->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { - *(ec->curr->rdata++) = acpi_ec_read_data(ec); - if (--ec->curr->rlen == 0) + ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec); + if (ec->curr->rlen == ec->curr->ri) ec->curr->done = true; } else goto err; - } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + } else if (ec->curr->wlen == ec->curr->wi && + (status & ACPI_EC_FLAG_IBF) == 0) ec->curr->done = true; goto unlock; err: @@ -219,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec) if (wait_event_timeout(ec->wait, ec_transaction_done(ec), msecs_to_jiffies(ACPI_EC_DELAY))) return 0; + /* try restart command if we get any false interrupts */ + if (ec->curr->irq_count && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + pr_debug(PREFIX "controller reset, restart transaction\n"); + start_transaction(ec); + if (wait_event_timeout(ec->wait, ec_transaction_done(ec), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + } /* missing GPEs, switch back to poll mode */ if (printk_ratelimit()) pr_info(PREFIX "missing confirmations, " @@ -268,10 +287,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ - t->irq_count = 0; - t->done = false; ec->curr = t; - acpi_ec_write_cmd(ec, ec->curr->command); + start_transaction(ec); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); -- cgit v0.10.2 From 0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 25 Oct 2008 21:48:46 +0400 Subject: ACPICA: Use spinlock for acpi_{en|dis}able_gpe Disabling gpe might interfere with gpe detection/handling, thus producing "interrupt not handled" errors. Ironically, disabling of GPE from interrupt context is already under spinlock, so only userspace needs to start using it. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3..eb6bf30 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -479,7 +479,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number, ACPI_NOT_ISR); + device->wakeup.gpe_number); device->wakeup.state.enabled = 1; } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 34c67ca..89d6d28 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -282,7 +282,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); } /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); @@ -305,7 +305,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* check if we received SCI during transaction */ ec_check_sci(ec, acpi_ec_read_status(ec)); /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { pr_info(PREFIX "GPE storm detected, " @@ -897,7 +897,7 @@ static int ec_install_handlers(struct acpi_ec *ec) if (ACPI_FAILURE(status)) return -ENODEV; acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -1036,7 +1036,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) /* Stop using GPE */ set_bit(EC_FLAGS_NO_GPE, &ec->flags); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); return 0; } @@ -1045,7 +1045,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); return 0; } diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6b..39db008 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_disable_gpe(gpe_event_info); - unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 38655eb..dea4c23 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state) spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } continue; @@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } @@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void) dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; spin_lock(&acpi_device_lock); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171..11995b6 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -394,10 +394,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_disable_gpe(handle, index); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_enable_gpe(handle, index); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 94d94e1..33bc0e3b1 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -252,9 +252,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); -- cgit v0.10.2 From 06cf7d3c7af902939cd1754abcafb2464060cba8 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sun, 9 Nov 2008 19:01:06 +0300 Subject: ACPI: EC: lower interrupt storm treshold http://bugzilla.kernel.org/show_bug.cgi?id=11892 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 89d6d28..ab84f99 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -70,7 +70,7 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */ -#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts +#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts per one transaction */ enum { -- cgit v0.10.2 From 8517934ef6aaa28d6e055b98df65b31cedbd1372 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 11 Nov 2008 12:54:11 +0300 Subject: ACPI: EC: Don't do transaction from GPE handler in poll mode. Referencies: http://bugzilla.kernel.org/show_bug.cgi?id=12004 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ab84f99..bd1af3e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -581,9 +581,12 @@ static u32 acpi_ec_gpe_handler(void *data) pr_debug(PREFIX "~~~> interrupt\n"); status = acpi_ec_read_status(ec); - gpe_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) - wake_up(&ec->wait); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) { + gpe_transaction(ec, status); + if (ec_transaction_done(ec) && + (status & ACPI_EC_FLAG_IBF) == 0) + wake_up(&ec->wait); + } ec_check_sci(ec, status); if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && -- cgit v0.10.2 From fad96ab62d38b94efbdb4c3c5fc55cb90d57937d Mon Sep 17 00:00:00 2001 From: Stefan Roscher Date: Tue, 11 Nov 2008 15:44:22 -0800 Subject: IB/ehca: Remove reference to special QP in case of port activation failure If the initialization of a special QP (e.g. AQP1) fails due to a software timeout, we have to remove the reference to that special QP struct from the port struct to stop the driver from accessing the QP, since it will be/has been destroyed by the caller, eg in this case ib_mad. Signed-off-by: Stefan Roscher Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index cb55be04..757035e 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num) *old_attr = new_attr; } +/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */ +static int replay_modify_qp(struct ehca_sport *sport) +{ + int aqp1_destroyed; + unsigned long flags; + + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + + aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI]; + + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!aqp1_destroyed) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + return aqp1_destroyed; +} + static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; struct ehca_sport *sport = &shca->sport[port - 1]; - unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - int suppress_event; - /* replay modify_qp for sqps */ - spin_lock_irqsave(&sport->mod_sqp_lock, flags); - suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; - if (sport->ibqp_sqp[IB_QPT_SMI]) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); - if (!suppress_event) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); - spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - - /* AQP1 was destroyed, ignore this event */ - if (suppress_event) - break; + /* only replay modify_qp calls in autodetect mode; + * if AQP1 was destroyed, the port is already down + * again and we can drop the event. + */ + if (ehca_nr_ports < 0) + if (replay_modify_qp(sport)) + break; sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); - ehca_query_sma_attr(shca, port, - &sport->saved_attr); + ehca_query_sma_attr(shca, port, &sport->saved_attr); } else { sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4d54b9f..9e05ee2 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp( if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + /* the QP pointer is no longer valid */ + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + NULL; ret = ehca2ib_return_code(h_ret); goto create_qp_exit6; } -- cgit v0.10.2 From 56960b546a88844a6f5295a9f81aab9e6b81edc9 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Sun, 9 Nov 2008 04:20:05 +0000 Subject: fujitsu-laptop: Add DMI callback for Lifebook S6420 The Lifebook S6420 is the ICH9M-based follow-up to the S6410. The application panel contains the following keys: lock, mobility center, eco, info. Whilst key 4 might be more appropriate for help then key 2, I've done things the S6410 way. I can confirm that backlight control is functional, and that the lock key activates the Gnome screensaver as expected. Signed-off-by: Tony Vroon Acked-by: Jonathan Woithe Signed-off-by: Len Brown diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 9124fcd..5ec77ae 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id) return 0; } +static int dmi_check_cb_s6420(const struct dmi_system_id *id) +{ + dmi_check_cb_common(id); + fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ + fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ + return 0; +} + static int dmi_check_cb_p8010(const struct dmi_system_id *id) { dmi_check_cb_common(id); @@ -482,6 +490,13 @@ static struct dmi_system_id fujitsu_dmi_table[] = { }, .callback = dmi_check_cb_s6410}, { + .ident = "Fujitsu Siemens S6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), + }, + .callback = dmi_check_cb_s6420}, + { .ident = "Fujitsu LifeBook P8010", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), -- cgit v0.10.2 From 32836259ff25ce97010569706cd33ba94de81d62 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:52 -0700 Subject: ACPI: pci_link: remove acpi_irq_balance_set() interface This removes the acpi_irq_balance_set() interface from the PCI interrupt link driver. x86 used acpi_irq_balance_set() to tell the PCI interrupt link driver to configure links to minimize IRQ sharing. But the link driver can easily figure out whether to turn on IRQ balancing based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of that external interface. It's better for the driver to figure this out at init-time. If we set it externally via the x86 code, the interface reduces modularity, and we depend on the fact that acpi_process_madt() happens before we process the kernel command line. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 8d676d8..9830681 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -113,7 +113,6 @@ static inline void acpi_disable_pci(void) acpi_pci_disabled = 1; acpi_noirq_set(); } -extern int acpi_irq_balance_set(char *str); /* routines for saving/restoring kernel state */ extern int acpi_save_state_mem(void); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8c1f76a..4c51a2f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1343,7 +1343,6 @@ static void __init acpi_process_madt(void) error = acpi_parse_madt_ioapic_entries(); if (!error) { acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; - acpi_irq_balance_set(NULL); acpi_ioapic = 1; smp_found_config = 1; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index fcfdef7..e52ad91 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void) return 0; } -static int acpi_irq_balance; /* 0: static, 1: balance */ +static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { @@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs); static int __init acpi_pci_link_init(void) { - if (acpi_noirq) return 0; + if (acpi_irq_balance == -1) { + /* no command line switch: enable balancing in IOAPIC mode */ + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + acpi_irq_balance = 1; + else + acpi_irq_balance = 0; + } + acpi_link.count = 0; INIT_LIST_HEAD(&acpi_link.entries); -- cgit v0.10.2 From 1a22f08dbd0e77c7cf45b5f527f93131d0b591b6 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:05 +0900 Subject: serial: sh-sci: fix cannot work SH7723 SCIFA SH7723 has SCIFA. This module is similer SCI register map, but it has FIFO. So this patch adds new type(PORT_SCIFA) and change some type checking. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5c0f32c7..518c032 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } @@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; @@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 6163a45..9f33b06 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -289,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e27f216..4e4f127 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -155,6 +155,9 @@ #define PORT_SC26XX 82 +/* SH-SCI */ +#define PORT_SCIFA 83 + #ifdef __KERNEL__ #include -- cgit v0.10.2 From 51ee3d92bfb983790b9ed576c22f59d42adff329 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:11 +0900 Subject: fix sci type for SH7723 This patch changes sci type of SH7723 from PORT_SCI to PORT_SCIFA. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a7412ce..6d9e697 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -119,17 +119,17 @@ static struct plat_sci_port sci_platform_data[] = { },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 56, 56, 56, 56 }, },{ .mapbase = 0xa4e40000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 88, 88, 88, 88 }, },{ .mapbase = 0xa4e50000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 109, 109, 109, 109 }, }, { .flags = 0, -- cgit v0.10.2 From ade7a9b4ccd20ab8159c77a0abd20552f2d6b06c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d879..2376f24 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v0.10.2 From 185aed75570fb4f78ef283dfa26cd9da5fa06a91 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 12 Nov 2008 12:53:48 +0900 Subject: sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. With the PMB enabled, only P1SEG and up are covered by the PMB mappings, meaning that situations where out-of-bounds physical addresses are read from will lead to TLB reset after the PMB miss, allowing for use cases like dd if=/dev/mem to reset the TLB. Fix this up to make sure the reference is between __MEMORY_START (phys) and __pa(high_memory). This is coherent across all variants of sh/sh64 with and without MMU, though the PMB bug itself is only applicable to SH-4A parts. Reported-by: Hideo Saito Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 436c285..65eaae3 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -293,6 +293,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) */ #define xlate_dev_kmem_ptr(p) p +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +int valid_phys_addr_range(unsigned long addr, size_t size); +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); + #endif /* __KERNEL__ */ #endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index 70e0906..f066e76 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o extable_32.o consistent.o +obj-y := init.o extable_32.o consistent.o mmap.o ifndef CONFIG_CACHE_OFF cache-$(CONFIG_CPU_SH2) := cache-sh2.o diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 index 0d92a8a..9481d0f 100644 --- a/arch/sh/mm/Makefile_64 +++ b/arch/sh/mm/Makefile_64 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o consistent.o +obj-y := init.o consistent.o mmap.o mmu-y := tlb-nommu.o pg-nommu.o extable_32.o mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \ diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c new file mode 100644 index 0000000..1f3cc3d --- /dev/null +++ b/arch/sh/mm/mmap.c @@ -0,0 +1,31 @@ +/* + * arch/sh/mm/mmap.c + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +/* + * You really shouldn't be using read() or write() on /dev/mem. This + * might go away in the future. + */ +int valid_phys_addr_range(unsigned long addr, size_t count) +{ + if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + return 0; + if (addr + count > __pa(high_memory)) + return 0; + + return 1; +} + +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) +{ + return 1; +} -- cgit v0.10.2 From 621a0d5207c18012cb39932f2d9830a11a6cb03d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 12 Nov 2008 09:36:35 +0100 Subject: hrtimer: clean up unused callback modes Impact: cleanup git grep HRTIMER_CB_IRQSAFE revealed half the callback modes are actually unused. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 07e510a..3eba438 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -46,9 +46,6 @@ enum hrtimer_restart { * hrtimer callback modes: * * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context - * HRTIMER_CB_IRQSAFE: Callback may run in hardirq context - * HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and - * does not restart the timer * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context * Special mode for tick emulation and * scheduler timer. Such timers are per @@ -61,8 +58,6 @@ enum hrtimer_restart { */ enum hrtimer_cb_mode { HRTIMER_CB_SOFTIRQ, - HRTIMER_CB_IRQSAFE, - HRTIMER_CB_IRQSAFE_NO_RESTART, HRTIMER_CB_IRQSAFE_PERCPU, HRTIMER_CB_IRQSAFE_UNLOCKED, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 95d3949..47e6334 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -664,14 +664,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, /* Timer is expired, act upon the callback mode */ switch(timer->cb_mode) { - case HRTIMER_CB_IRQSAFE_NO_RESTART: - debug_hrtimer_deactivate(timer); - /* - * We can call the callback from here. No restart - * happens, so no danger of recursion - */ - BUG_ON(timer->function(timer) != HRTIMER_NORESTART); - return 1; case HRTIMER_CB_IRQSAFE_PERCPU: case HRTIMER_CB_IRQSAFE_UNLOCKED: /* @@ -683,7 +675,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, */ debug_hrtimer_deactivate(timer); return 1; - case HRTIMER_CB_IRQSAFE: case HRTIMER_CB_SOFTIRQ: /* * Move everything else into the softirq pending list ! -- cgit v0.10.2 From d7a8943635485597ae7c6d554a8ccf3ce5a42d2d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 09:48:04 +0100 Subject: ALSA: hda - Fix IDT/STAC multiple HP detection Due to the recent change for multiple HP as line-out switch, only one of the multiple headphons (usually a wrong one) is toggled and the other pins are still disabled. This causes the silent output problem on some Dell laptops. Also, the hp_switch check is screwed up when a line-in or a mic-in jack exists. This is added as an additional output, but hp_switch check doesn't take it into account. This patch fixes these issues: simplify hp_switch check by using the NID instead of bool, and clean up / fix the toggle of HP pins in unsol event handler code. Reference: Novell bnc#443267 https://bugzilla.novell.com/show_bug.cgi?id=443267 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a511601..4300a67 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -212,7 +212,7 @@ struct sigmatel_spec { /* i/o switches */ unsigned int io_switch[2]; unsigned int clfe_swap; - unsigned int hp_switch; + unsigned int hp_switch; /* NID of HP as line-out */ unsigned int aloopback; struct hda_pcm pcm_rec[2]; /* PCM information */ @@ -2443,7 +2443,7 @@ static int stac92xx_hp_switch_get(struct snd_kcontrol *kcontrol, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - ucontrol->value.integer.value[0] = spec->hp_switch; + ucontrol->value.integer.value[0] = !!spec->hp_switch; return 0; } @@ -2452,8 +2452,9 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - - spec->hp_switch = ucontrol->value.integer.value[0]; + int nid = kcontrol->private_value; + + spec->hp_switch = ucontrol->value.integer.value[0] ? nid : 0; /* check to be sure that the ports are upto date with * switch changes @@ -2862,7 +2863,8 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, if (cfg->hp_outs > 1) { err = stac92xx_add_control(spec, STAC_CTL_WIDGET_HP_SWITCH, - "Headphone as Line Out Switch", 0); + "Headphone as Line Out Switch", + cfg->hp_pins[cfg->hp_outs - 1]); if (err < 0) return err; } @@ -3786,11 +3788,30 @@ static int get_hp_pin_presence(struct hda_codec *codec, hda_nid_t nid) return 0; } +/* return non-zero if the hp-pin of the given array index isn't + * a jack-detection target + */ +static int no_hp_sensing(struct sigmatel_spec *spec, int i) +{ + struct auto_pin_cfg *cfg = &spec->autocfg; + + /* ignore sensing of shared line and mic jacks */ + if (spec->line_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_LINE]) + return 1; + if (spec->mic_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_MIC]) + return 1; + /* ignore if the pin is set as line-out */ + if (cfg->hp_pins[i] == spec->hp_switch) + return 1; + return 0; +} + static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) { struct sigmatel_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; - int nid = cfg->hp_pins[cfg->hp_outs - 1]; int i, presence; presence = 0; @@ -3801,15 +3822,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->hp_outs; i++) { if (presence) break; - if (spec->hp_switch && cfg->hp_pins[i] == nid) - break; + if (no_hp_sensing(spec, i)) + continue; presence = get_hp_pin_presence(codec, cfg->hp_pins[i]); } if (presence) { - /* disable lineouts, enable hp */ + /* disable lineouts */ if (spec->hp_switch) - stac92xx_reset_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_reset_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_reset_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3821,9 +3843,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data & ~spec->eapd_mask); } else { - /* enable lineouts, disable hp */ + /* enable lineouts */ if (spec->hp_switch) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_set_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_set_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3835,8 +3858,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data | spec->eapd_mask); } - if (!spec->hp_switch && cfg->hp_outs > 1 && presence) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + /* toggle hp outs */ + for (i = 0; i < cfg->hp_outs; i++) { + unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN; + if (no_hp_sensing(spec, i)) + continue; + if (presence) + stac92xx_set_pinctl(codec, cfg->hp_pins[i], val); + else + stac92xx_reset_pinctl(codec, cfg->hp_pins[i], val); + } } static void stac92xx_pin_sense(struct hda_codec *codec, int idx) -- cgit v0.10.2 From 8f65b5354b1a34a536641bd915958662e8af5320 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Wed, 12 Nov 2008 01:41:09 -0800 Subject: tcp_htcp: last_cong bug fix This patch fixes a minor bug in tcp_htcp.c which has been highlighted by Lachlan Andrew and Lawrence Stewart. Currently, the time since the last congestion event, which is stored in variable last_cong, is reset whenever there is a state change into TCP_CA_Open. This includes transitions of the type TCP_CA_Open->TCP_CA_Disorder->TCP_CA_Open which are not associated with backoff of cwnd. The patch changes last_cong to be updated only on transitions into TCP_CA_Open that occur after experiencing the congestion-related states TCP_CA_Loss, TCP_CA_Recovery, TCP_CA_CWR. Signed-off-by: Doug Leith Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c index af99776..937549b 100644 --- a/net/ipv4/tcp_htcp.c +++ b/net/ipv4/tcp_htcp.c @@ -69,9 +69,12 @@ static u32 htcp_cwnd_undo(struct sock *sk) const struct tcp_sock *tp = tcp_sk(sk); struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = ca->undo_last_cong; - ca->maxRTT = ca->undo_maxRTT; - ca->old_maxB = ca->undo_old_maxB; + if (ca->undo_last_cong) { + ca->last_cong = ca->undo_last_cong; + ca->maxRTT = ca->undo_maxRTT; + ca->old_maxB = ca->undo_old_maxB; + ca->undo_last_cong = 0; + } return max(tp->snd_cwnd, (tp->snd_ssthresh << 7) / ca->beta); } @@ -268,7 +271,10 @@ static void htcp_state(struct sock *sk, u8 new_state) case TCP_CA_Open: { struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = jiffies; + if (ca->undo_last_cong) { + ca->last_cong = jiffies; + ca->undo_last_cong = 0; + } } break; case TCP_CA_CWR: -- cgit v0.10.2 From d35aac10eb7bcb3b80bef16b60844af0313f47f7 Mon Sep 17 00:00:00 2001 From: Patrick Ohly Date: Wed, 12 Nov 2008 01:54:56 -0800 Subject: net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change. Signed-off-by: Patrick Ohly Signed-off-by: David S. Miller diff --git a/net/compat.c b/net/compat.c index 67fb6a3..6ce1a1c 100644 --- a/net/compat.c +++ b/net/compat.c @@ -226,14 +226,14 @@ int put_cmsg_compat(struct msghdr *kmsg, int level, int type, int len, void *dat return 0; /* XXX: return error? check spec. */ } - if (level == SOL_SOCKET && type == SO_TIMESTAMP) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMP) { struct timeval *tv = (struct timeval *)data; ctv.tv_sec = tv->tv_sec; ctv.tv_usec = tv->tv_usec; data = &ctv; len = sizeof(ctv); } - if (level == SOL_SOCKET && type == SO_TIMESTAMPNS) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMPNS) { struct timespec *ts = (struct timespec *)data; cts.tv_sec = ts->tv_sec; cts.tv_nsec = ts->tv_nsec; -- cgit v0.10.2 From 47e74f2ba8fbf9fb1378e2524e6cfdc2fb37f160 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 12 Nov 2008 00:01:27 -0500 Subject: ring-buffer: no preempt for sched_clock() Impact: disable preemption when calling sched_clock() The ring_buffer_time_stamp still uses sched_clock as its counter. But it is a bug to call it with preemption enabled. This requirement should not be pushed to the ring_buffer_time_stamp callers, so the ring_buffer_time_stamp needs to disable preemption when calling sched_clock. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b08ee9f..231db20 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -51,8 +51,14 @@ void tracing_off(void) /* FIXME!!! */ u64 ring_buffer_time_stamp(int cpu) { + u64 time; + + preempt_disable_notrace(); /* shift to debug/test normalization and TIME_EXTENTS */ - return sched_clock() << DEBUG_SHIFT; + time = sched_clock() << DEBUG_SHIFT; + preempt_enable_notrace(); + + return time; } void ring_buffer_normalize_time_stamp(int cpu, u64 *ts) -- cgit v0.10.2 From a2d477778e82a60a0b7114cefdb70aa43af28782 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 12 Nov 2008 16:19:00 +0530 Subject: sched: fix stale value in average load per task Impact: fix load balancer load average calculation accuracy cpu_avg_load_per_task() returns a stale value when nr_running is 0. It returns an older stale (caculated when nr_running was non zero) value. This patch returns and sets rq->avg_load_per_task to zero when nr_running is 0. Compile and boot tested on a x86_64 box. Signed-off-by: Balbir Singh Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 50a21f9..3bafbe3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1456,6 +1456,8 @@ static unsigned long cpu_avg_load_per_task(int cpu) if (rq->nr_running) rq->avg_load_per_task = rq->load.weight / rq->nr_running; + else + rq->avg_load_per_task = 0; return rq->avg_load_per_task; } -- cgit v0.10.2 From b3e123cf65baadc0cc30a843fd48cfd6a4b2e1ca Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 12 Nov 2008 10:16:47 -0800 Subject: RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface) When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Acked-by: Divy Le Ray Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff980..160ef482 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a..5e663cc 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v0.10.2 From fe25c56190bbc0951d7c53b4ccd148e669d69938 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:36 -0800 Subject: IPoIB: Don't enable NAPI when it's already enabled If a P_Key is not present when an interface is created, ipoib_open() will return after doing napi_enable(). ipoib_open() will be called again from ipoib_pkey_poll() when the P_Key appears, after NAPI has already been enabled, and try to enable it again. This triggers a BUG_ON() in napi_enable(). Fix this by moving the call to napi_enable() to after the test for P_Key presence. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fddded7..b1eeb5a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - napi_enable(&priv->napi); set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; + napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) { napi_disable(&priv->napi); return -EINVAL; -- cgit v0.10.2 From 93a3ab939ba90e00e193f0bad98f43fbdfbd925d Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:38 -0800 Subject: IPoIB: Fix hang in ipoib_flush_paths() ipoib_flush_paths() can hang during an SM up/down loop: if path_rec_start() fails (for instance, because there is no sm_ah), the path is still added to the path list by neigh_add_path(). Then, ipoib_flush_paths() will wait for path->done, but it will never complete because the request was not issued at all. Fix this by completing path->done if issuing the query fails. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index b1eeb5a..0b2f601 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -547,6 +547,7 @@ static int path_rec_start(struct net_device *dev, if (path->query_id < 0) { ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id); path->query = NULL; + complete(&path->done); return path->query_id; } -- cgit v0.10.2 From ff79ae80837cf45cb703b34824dd3862d2ddcb24 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:39 -0800 Subject: IPoIB: Fix crash in path_rec_completion() Fix a crash in path_rec_completion() during an SM up/down loop. If more than one path record request is issued, the first completion releases path->done, allowing ipoib_flush_paths() to free the path, and thus corrupting it for the second completion. Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") added the field path->valid and changed the test "if (!path)" to "if (!path || !path->valid)". This change made it possible for a path with an outstanding query to pass the test and issue another query on the same path. Having two queries on the same path leads to a crash. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0b2f601..85257f6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -664,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); - if (path_rec_start(dev, path)) { + if (!path->query && path_rec_start(dev, path)) { spin_unlock_irqrestore(&priv->lock, flags); path_free(dev, path); return; -- cgit v0.10.2 From 1c1271850494f06b63ae6b485e2e1b9c27ffb2d1 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Wed, 12 Nov 2008 01:24:41 +0100 Subject: parisc: fix find_extend_vma() breakage The STACK_GROWSUP case of stack expansion was missing a test for 'prev', which got removed by commit cb8f488c33539f096580e202f5438a809195008f ("mmap.c: deinline a few functions") by mistake. I found my original email in "sent" folder. The patch in that mail does NOT remove !prev. That change had beed added by someone else. Ok, I think we are not much interested in who did it, let's fix it for good. [ "It looks like this was caused by me fixing rejects. That was the fancy include-lots-of-context-so-it-wont-apply patch." - akpm ] Reported-and-bisected-by: Helge Deller Signed-off-by: Denys Vlasenko Cc: Andrew Morton Cc: Jiri Kosina Signed-off-by: Linus Torvalds diff --git a/mm/mmap.c b/mm/mmap.c index de14ac2..d4855a68 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1704,7 +1704,7 @@ find_extend_vma(struct mm_struct *mm, unsigned long addr) vma = find_vma_prev(mm, addr, &prev); if (vma && (vma->vm_start <= addr)) return vma; - if (expand_stack(prev, addr)) + if (!prev || expand_stack(prev, addr)) return NULL; if (prev->vm_flags & VM_LOCKED) { if (mlock_vma_pages_range(prev, addr, prev->vm_end) < 0) -- cgit v0.10.2 From 31ea24bba77a16d3220b0822838785cbafb78175 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:34:59 +0000 Subject: MN10300: Clean up the misalignment handler a little Clean up the MN10300 misalignment handler a little by: (1) Use ilog2() rather than doing implementing log2() locally. (2) Make format_tbl[] const and static. (3) Making the debugging prints more consistent. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 32aa89d..416c43b 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -37,7 +37,7 @@ #include #if 0 -#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__) +#define kdebug(FMT, ...) printk(KERN_DEBUG "MISALIGN: "FMT"\n", ##__VA_ARGS__) #else #define kdebug(FMT, ...) do {} while (0) #endif @@ -50,14 +50,6 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned disp, unsigned long **_register); -static inline unsigned int_log2(unsigned x) -{ - unsigned y; - asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0)); - return y; -} -#define log2(x) int_log2(x) - static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -88,7 +80,7 @@ enum format_id { FMT_D9, }; -struct { +static const struct { u_int8_t opsz, dispsz; } format_tbl[16] = { [FMT_S0] = { 8, 0 }, @@ -273,7 +265,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop; - kdebug("MISALIGN at %lx\n", regs->pc); + kdebug("==>misalignment({pc=%lx})", regs->pc); if (in_interrupt()) die("Misalignment trap in interrupt context", regs, code); @@ -295,7 +287,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) noc = 8; for (pop = mn10300_opcodes; pop->name; pop++) { - npop = log2(pop->opcode | pop->opmask); + npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; npop = (npop + 8) & ~7; @@ -391,7 +383,7 @@ transfer_failed: /* we matched the opcode */ found_opcode: - kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n", + kdebug("%lx: %x==%x { %x, %x }", regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); tmp = format_tbl[pop->format].opsz; @@ -442,13 +434,13 @@ found_opcode: goto bad_reg_mode; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov (%p),DARn\n", address); + kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; if (pop->params[0] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu (%p),DARn\n", address); + kdebug("movhu (%p),DARn", address); data = 0; if (copy_from_user(&data, (void *) address, 2) != 0) goto transfer_failed; @@ -472,14 +464,13 @@ found_opcode: data = *store; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov %lx,(%p)\n", data, address); + kdebug("mov %lx,(%p)", data, address); if (copy_to_user((void *) address, &data, 4) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu %hx,(%p)\n", - (uint16_t) data, address); + kdebug("movhu %hx,(%p)", (uint16_t) data, address); if (copy_to_user((void *) address, &data, 2) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) -- cgit v0.10.2 From 9f55588968095306d52bd30564666d4fadce5e39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:04 +0000 Subject: MN10300: Add built-in testing for misalignment handler Add configurable built-in testing for the MN10300 misalignment handler. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug index 524e338..ff80e86 100644 --- a/arch/mn10300/Kconfig.debug +++ b/arch/mn10300/Kconfig.debug @@ -15,6 +15,15 @@ config DEBUG_DECOMPRESS_KERNEL decompressing Linux seeing "Uncompressing Linux... " and "Ok, booting the kernel.\n" on console. +config TEST_MISALIGNMENT_HANDLER + bool "Run tests on the misalignment handler" + depends on DEBUG_KERNEL + default n + help + If you say Y here the kernel will execute a list of misaligned memory + accesses to make sure the misalignment handler deals them with + correctly. If it does not, the kernel will throw a BUG. + config KPROBES bool "Kprobes" depends on DEBUG_KERNEL diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 416c43b..93e09c4 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -650,3 +650,164 @@ static int misalignment_reg(unsigned long *registers, unsigned params, return 1; } + +/* + * misalignment handler tests + */ +#ifdef CONFIG_TEST_MISALIGNMENT_HANDLER +static u8 __initdata testbuf[512] __attribute__((aligned(16))) = { + [257] = 0x11, + [258] = 0x22, + [259] = 0x33, + [260] = 0x44, +}; + +#define ASSERTCMP(X, OP, Y) \ +do { \ + if (unlikely(!((X) OP (Y)))) { \ + printk(KERN_ERR "\n"); \ + printk(KERN_ERR "MISALIGN: Assertion failed at line %u\n", \ + __LINE__); \ + printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ + (unsigned long)(X), (unsigned long)(Y)); \ + BUG(); \ + } \ +} while(0) + +static int __init test_misalignment(void) +{ + register void *r asm("e0"); + register u32 y asm("e1"); + void *p = testbuf, *q; + u32 tmp, tmp2, x; + + printk(KERN_NOTICE "==>test_misalignment() [testbuf=%p]\n", p); + p++; + + printk(KERN_NOTICE "___ MOV (Am),Dn ___\n"); + q = p + 256; + asm volatile("mov (%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p + 256); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (256,Am),Dn ___\n"); + q = p; + asm volatile("mov (256,%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Di,Am),Dn ___\n"); + tmp = 256; + q = p; + asm volatile("mov (%2,%0),%1" : "+a"(q), "=d"(x), "+d"(tmp)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + ASSERTCMP(tmp, ==, 256); + + printk(KERN_NOTICE "___ MOV (256,Rm),Rn ___\n"); + r = p; + asm volatile("mov (256,%0),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 4); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+,8),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+,8),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 8); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (7,SP),Rn ___\n"); + asm volatile( + "add -16,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(7,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(8,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(9,sp) \n" + "mov +0x44,%0 \n" + "movbu %0,(10,sp) \n" + "mov (7,sp),%1 \n" + "add +16,sp \n" + : "+a"(q), "=d"(x)); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (259,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(259,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(262,sp) \n" + "mov (259,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + printk(KERN_NOTICE "___ MOV (260,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(262,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(263,sp) \n" + "mov (260,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + + printk(KERN_NOTICE "___ MOV_LNE ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %2,%3 \n" + "mov %1,%2 \n" + "cmp +0,%1 \n" + "mov_lne (%0+,4),%1" + : "+r"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + ASSERTCMP(q, ==, p + 256 + 12); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV in SETLB ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %1,%3 \n" + "mov (%0+),%1 \n" + "cmp +0,%1 \n" + "lne " + : "+a"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + + ASSERTCMP(q, ==, p + 256 + 8); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "<==test_misalignment()\n"); + return 0; +} + +arch_initcall(test_misalignment); + +#endif /* CONFIG_TEST_MISALIGNMENT_HANDLER */ -- cgit v0.10.2 From ee6e740cf7e5605b353af539eb9a6e17948747b6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:09 +0000 Subject: MN10300: Add further misalignment fixups Add further misalignment fixup support to the MN10300 arch, notably for ABS32 and SP+disp addressing. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 93e09c4..ab03bac4 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -120,9 +120,14 @@ enum value_id { SD24, /* 24-bit signed displacement */ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */ SIMM8, /* 8-bit signed immediate */ + IMM8, /* 8-bit unsigned immediate */ + IMM16, /* 16-bit unsigned immediate */ IMM24, /* 24-bit unsigned immediate */ IMM32, /* 32-bit unsigned immediate */ - IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */ + IMM32_HIGH8, /* 32-bit unsigned immediate, LSB in opcode */ + + IMM32_MEM, /* 32-bit unsigned displacement */ + IMM32_HIGH8_MEM, /* 32-bit unsigned displacement, LSB in opcode */ DN0 = DM0, DN1 = DM1, @@ -177,6 +182,10 @@ struct mn10300_opcode { Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ static const struct mn10300_opcode mn10300_opcodes[] = { +{ "mov", 0x4200, 0xf300, 0, FMT_S1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "mov", 0x4300, 0xf300, 0, FMT_S1, 0, {AM1, MEM2(IMM8, SP)}}, +{ "mov", 0x5800, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), DN0}}, +{ "mov", 0x5c00, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), AN0}}, { "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}}, { "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}}, { "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}}, @@ -199,24 +208,46 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, { "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}}, { "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}}, +{ "mov", 0xfa900000, 0xfff30000, 0, FMT_D2, 0, {AM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfa910000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfab00000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), AN0}}, +{ "mov", 0xfab40000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, { "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, +{ "mov", 0xfb8a0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "mov", 0xfb9a0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, { "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}}, { "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}}, +{ "mov", 0xfc800000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc810000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc900000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfc910000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfca00000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), AN0}}, +{ "mov", 0xfca40000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "mov", 0xfcb00000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), AN0}}, +{ "mov", 0xfcb40000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, { "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, +{ "mov", 0xfd8a0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "mov", 0xfd9a0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, +{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, { "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "mov", 0xfe0e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, { "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, +{ "mov", 0xfe8a0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "mov", 0xfe9a0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}}, { "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}}, @@ -224,26 +255,42 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}}, { "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}}, { "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, +{ "movhu", 0xf89300, 0xfff300, 0, FMT_D1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "movhu", 0xf8bc00, 0xfffc00, 0, FMT_D1, 0, {MEM2(IMM8, SP), DN0}}, { "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, { "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}}, { "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}}, { "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, +{ "movhu", 0xfa930000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "movhu", 0xfabc0000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, +{ "movhu", 0xfbca0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "movhu", 0xfbda0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, { "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, +{ "movhu", 0xfc830000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "movhu", 0xfc930000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "movhu", 0xfcac0000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "movhu", 0xfcbc0000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, +{ "movhu", 0xfdca0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "movhu", 0xfdda0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, { "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, { "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "movhu", 0xfe4e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "movhu", 0xfe5e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, +{ "movhu", 0xfeca0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, { 0, 0, 0, 0, 0, 0, {0}}, @@ -552,6 +599,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]]; address += *postinc; break; + case SP: + address += registers[REG_SP >> 2]; + break; case SD8: case SIMM8: @@ -575,7 +625,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp & 0x00ffffff; break; case IMM32: + case IMM32_MEM: case IMM32_HIGH8: + case IMM32_HIGH8_MEM: address += disp; break; default: -- cgit v0.10.2 From b308bf3be1f75207c307eea9ada90e0b76194911 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:14 +0000 Subject: MN10300: Extract the displacement from an insn correctly in misalignment fixup Extract the displacement from an MN10300 instruction correctly in the misalignment fixup handler. The code should extract the displacement in LSB order, not MSB order. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index ab03bac4..614c32b 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -43,11 +43,11 @@ #endif static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc); static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register); static const unsigned Dreg_index[] = { @@ -304,13 +304,13 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc; + unsigned long data, *store, *postinc, disp; mm_segment_t seg; siginfo_t info; - uint32_t opcode, disp, noc, xo, xm; + uint32_t opcode, noc, xo, xm; uint8_t *pc, byte; void *address; - unsigned tmp, npop; + unsigned tmp, npop, dispsz, loop; kdebug("==>misalignment({pc=%lx})", regs->pc); @@ -445,17 +445,17 @@ found_opcode: /* grab the extra displacement (note it's LSB first) */ disp = 0; - tmp = format_tbl[pop->format].dispsz >> 3; - while (tmp > 0) { - tmp--; - disp <<= 8; - + dispsz = format_tbl[pop->format].dispsz; + for (loop = 0; loop < dispsz; loop += 8) { pc++; if (__get_user(byte, pc) != 0) goto fetch_error; - disp |= byte; + disp |= byte << loop; + kdebug("{%p} disp[%02x]=%02x", pc, loop, byte); } + kdebug("disp=%lx", disp); + set_fs(KERNEL_XDS); if (fixup || regs->epsw & EPSW_nSL) set_fs(seg); @@ -538,7 +538,7 @@ found_opcode: * determine the address that was being accessed */ static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc) { unsigned long *postinc = NULL, address = 0, tmp; @@ -644,7 +644,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, * determine the register that is acting as source/dest */ static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register) { params &= 0x7fffffff; -- cgit v0.10.2 From f911c685d65ea1855eb3f95b8eaf871e5d9342fa Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:20 +0000 Subject: MN10300: Fix register-postinc addressing misalignment handling Fix misalignment handling of operands with register postincrement addressing. The flag to indicate that postincrement is required should not be interpreted as an specification of a value to be added to the address. Also add BUGs to catch unimplemented parameter markings in the opcodes table. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 614c32b..066ddc6 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -543,7 +543,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, { unsigned long *postinc = NULL, address = 0, tmp; - params &= 0x7fffffff; + params &= 0x00ffffff; do { switch (params & 0xff) { @@ -631,6 +631,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp; break; default: + BUG(); return 0; } } while ((params >>= 8)); @@ -697,6 +698,7 @@ static int misalignment_reg(unsigned long *registers, unsigned params, break; default: + BUG(); return 0; } -- cgit v0.10.2 From aefefbbec1ad25bafa97a7a1db25313ce26563e2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:25 +0000 Subject: MN10300: Allow misalignment fixup in interrupt handling Allow misalignment fixup in interrupt handling in the MN10300 arch. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 066ddc6..05a3c2f 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -314,9 +314,6 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) kdebug("==>misalignment({pc=%lx})", regs->pc); - if (in_interrupt()) - die("Misalignment trap in interrupt context", regs, code); - if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); -- cgit v0.10.2 From ddb6d05cbaea76eddbee52585152ab801a8aedc7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:30 +0000 Subject: MN10300: Perform misalignment fixups of MOV_Lcc Perform misalignment fixups of the MOV_Lcc instructions (move postinc memory to register and conditionally loop). Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 05a3c2f..d5b45bb 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -50,6 +50,8 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, unsigned long **_register); +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode); + static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -78,6 +80,7 @@ enum format_id { FMT_D7, FMT_D8, FMT_D9, + FMT_D10, }; static const struct { @@ -95,6 +98,7 @@ static const struct { [FMT_D7] = { 24, 8 }, [FMT_D8] = { 24, 24 }, [FMT_D9] = { 24, 32 }, + [FMT_D10] = { 32, 0 }, }; enum value_id { @@ -293,6 +297,19 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, + +{ "mov_llt", 0xf7e00000, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lgt", 0xf7e00001, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lge", 0xf7e00002, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lle", 0xf7e00003, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcs", 0xf7e00004, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lhi", 0xf7e00005, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcc", 0xf7e00006, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lls", 0xf7e00007, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_leq", 0xf7e00008, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, + { 0, 0, 0, 0, 0, 0, {0}}, }; @@ -477,7 +494,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0) { + if (strcmp(pop->name, "mov") == 0 || + memcmp(pop->name, "mov_l", 5) == 0) { kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; @@ -495,6 +513,7 @@ found_opcode: } *store = data; + kdebug("loaded %lx", data); } else { /* move register to memory */ if (!misalignment_reg(registers, pop->params[0], opcode, disp, @@ -527,6 +546,11 @@ found_opcode: tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; regs->pc += tmp >> 3; + /* handle MOV_Lcc, which are currently the only FMT_D10 insns that + * access memory */ + if (pop->format == FMT_D10) + misalignment_MOV_Lcc(regs, opcode); + set_fs(seg); return; } @@ -703,6 +727,75 @@ static int misalignment_reg(unsigned long *registers, unsigned params, } /* + * handle the conditional loop part of the move-and-loop instructions + */ +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode) +{ + unsigned long epsw = regs->epsw; + unsigned long NxorV; + + kdebug("MOV_Lcc %x [flags=%lx]", opcode, epsw & 0xf); + + /* calculate N^V and shift onto the same bit position as Z */ + NxorV = ((epsw >> 3) ^ epsw >> 1) & 1; + + switch (opcode & 0xf) { + case 0x0: /* MOV_LLT: N^V */ + if (NxorV) + goto take_the_loop; + return; + case 0x1: /* MOV_LGT: ~(Z or (N^V))*/ + if (!((epsw & EPSW_FLAG_Z) | NxorV)) + goto take_the_loop; + return; + case 0x2: /* MOV_LGE: ~(N^V) */ + if (!NxorV) + goto take_the_loop; + return; + case 0x3: /* MOV_LLE: Z or (N^V) */ + if ((epsw & EPSW_FLAG_Z) | NxorV) + goto take_the_loop; + return; + + case 0x4: /* MOV_LCS: C */ + if (epsw & EPSW_FLAG_C) + goto take_the_loop; + return; + case 0x5: /* MOV_LHI: ~(C or Z) */ + if (!(epsw & (EPSW_FLAG_C | EPSW_FLAG_Z))) + goto take_the_loop; + return; + case 0x6: /* MOV_LCC: ~C */ + if (!(epsw & EPSW_FLAG_C)) + goto take_the_loop; + return; + case 0x7: /* MOV_LLS: C or Z */ + if (epsw & (EPSW_FLAG_C | EPSW_FLAG_Z)) + goto take_the_loop; + return; + + case 0x8: /* MOV_LEQ: Z */ + if (epsw & EPSW_FLAG_Z) + goto take_the_loop; + return; + case 0x9: /* MOV_LNE: ~Z */ + if (!(epsw & EPSW_FLAG_Z)) + goto take_the_loop; + return; + case 0xa: /* MOV_LRA: always */ + goto take_the_loop; + + default: + BUG(); + } + +take_the_loop: + /* wind the PC back to just after the SETLB insn */ + kdebug("loop LAR=%lx", regs->lar); + regs->pc = regs->lar - 4; +} + +/* * misalignment handler tests */ #ifdef CONFIG_TEST_MISALIGNMENT_HANDLER -- cgit v0.10.2 From 6d615c78fb92fbd80e52ba7acb2d4c4d503006c3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:35 +0000 Subject: MN10300: Handle misaligned postinc-with-imm addressing mode correctly Correctly handle misalignment in MOV instructions with postinc-with-immediate addressing mode operands. In these, the immediate value is the increment to be applied the address register, not the displacement to the address. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index d5b45bb..61e65ec 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -44,7 +44,8 @@ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc); + void **_address, unsigned long **_postinc, + unsigned long *_inc); static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, @@ -150,7 +151,7 @@ enum value_id { }; struct mn10300_opcode { - const char *name; + const char name[8]; u_int32_t opcode; u_int32_t opmask; unsigned exclusion; @@ -310,7 +311,7 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, { "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ 0, 0, 0, 0, 0, 0, {0}}, +{ "", 0, 0, 0, 0, 0, {0}}, }; /* @@ -321,11 +322,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp; + unsigned long data, *store, *postinc, disp, inc; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; - uint8_t *pc, byte; + uint8_t *pc, byte, datasz; void *address; unsigned tmp, npop, dispsz, loop; @@ -347,7 +348,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) opcode = byte; noc = 8; - for (pop = mn10300_opcodes; pop->name; pop++) { + for (pop = mn10300_opcodes; pop->name[0]; pop++) { npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; @@ -484,32 +485,31 @@ found_opcode: goto failed; } + /* determine the data transfer size of the move */ + if (pop->name[3] == 0 || /* "mov" */ + pop->name[4] == 'l') /* mov_lcc */ + inc = datasz = 4; + else if (pop->name[3] == 'h') /* movhu */ + inc = datasz = 2; + else + goto unsupported_instruction; + if (pop->params[0] & 0x80000000) { /* move memory to register */ if (!misalignment_addr(registers, pop->params[0], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; if (!misalignment_reg(registers, pop->params[1], opcode, disp, &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0 || - memcmp(pop->name, "mov_l", 5) == 0) { - kdebug("mov (%p),DARn", address); - if (copy_from_user(&data, (void *) address, 4) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu (%p),DARn", address); - data = 0; - if (copy_from_user(&data, (void *) address, 2) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; + kdebug("mov%u (%p),DARn", datasz, address); + if (copy_from_user(&data, (void *) address, datasz) != 0) + goto transfer_failed; + if (pop->params[0] & 0x1000000) { + kdebug("inc=%lx", inc); + *postinc += inc; } *store = data; @@ -521,26 +521,16 @@ found_opcode: goto bad_reg_mode; if (!misalignment_addr(registers, pop->params[1], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; data = *store; - if (strcmp(pop->name, "mov") == 0) { - kdebug("mov %lx,(%p)", data, address); - if (copy_to_user((void *) address, &data, 4) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu %hx,(%p)", (uint16_t) data, address); - if (copy_to_user((void *) address, &data, 2) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; - } + kdebug("mov%u %lx,(%p)", datasz, data, address); + if (copy_to_user((void *) address, &data, datasz) != 0) + goto transfer_failed; + if (pop->params[1] & 0x1000000) + *postinc += inc; } tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; @@ -560,10 +550,17 @@ found_opcode: */ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc) + void **_address, unsigned long **_postinc, + unsigned long *_inc) { unsigned long *postinc = NULL, address = 0, tmp; + if (!(params & 0x1000000)) { + kdebug("noinc"); + *_inc = 0; + _inc = NULL; + } + params &= 0x00ffffff; do { @@ -624,32 +621,40 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += registers[REG_SP >> 2]; break; + /* displacements are either to be added to the address + * before use, or, in the case of post-inc addressing, + * to be added into the base register after use */ case SD8: case SIMM8: - address += (int32_t) (int8_t) (disp & 0xff); - break; + disp = (long) (int8_t) (disp & 0xff); + goto displace_or_inc; case SD16: - address += (int32_t) (int16_t) (disp & 0xffff); - break; + disp = (long) (int16_t) (disp & 0xffff); + goto displace_or_inc; case SD24: tmp = disp << 8; asm("asr 8,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case SIMM4_2: tmp = opcode >> 4 & 0x0f; tmp <<= 28; asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case IMM24: - address += disp & 0x00ffffff; - break; + disp &= 0x00ffffff; + goto displace_or_inc; case IMM32: case IMM32_MEM: case IMM32_HIGH8: case IMM32_HIGH8_MEM: - address += disp; + displace_or_inc: + kdebug("%s %lx", _inc ? "incr" : "disp", disp); + if (!_inc) + address += disp; + else + *_inc = disp; break; default: BUG(); -- cgit v0.10.2 From 852c15b7362cf34e0d7949abefbfeeb0845d93b4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:40 +0000 Subject: MN10300: Fix misaligned index-register addressing handling Fix misalignment handling for an address calculated from the sum of two registers. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 61e65ec..a598368 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -570,11 +570,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case DM1: - postinc = ®isters[Dreg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Dreg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case DM2: - postinc = ®isters[Dreg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Dreg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case AM0: @@ -582,11 +582,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case AM1: - postinc = ®isters[Areg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Areg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case AM2: - postinc = ®isters[Areg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Areg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case RM0: -- cgit v0.10.2 From d3bd462865421dd8be310fac2d2f6da6069f9679 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:45 +0000 Subject: MN10300: Handle misaligned SP-based operands Support misalignment handling for instructions that have kernel SP-based address operands, including fixing those that include IMM8 or IMM16 displacements. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index a598368..e247a6e 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -42,8 +42,9 @@ #define kdebug(FMT, ...) do {} while (0) #endif -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc); @@ -322,7 +323,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp, inc; + unsigned long data, *store, *postinc, disp, inc, sp; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; @@ -330,7 +331,12 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; - kdebug("==>misalignment({pc=%lx})", regs->pc); + if (user_mode(regs)) + sp = regs->sp; + else + sp = (unsigned long) regs + sizeof(*regs); + + kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); @@ -496,7 +502,8 @@ found_opcode: if (pop->params[0] & 0x80000000) { /* move memory to register */ - if (!misalignment_addr(registers, pop->params[0], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[0], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -520,7 +527,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (!misalignment_addr(registers, pop->params[1], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[1], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -548,8 +556,9 @@ found_opcode: /* * determine the address that was being accessed */ -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc) { @@ -618,7 +627,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case SP: - address += registers[REG_SP >> 2]; + address += sp; break; /* displacements are either to be added to the address @@ -642,6 +651,12 @@ static int misalignment_addr(unsigned long *registers, unsigned params, asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); disp = (long) tmp; goto displace_or_inc; + case IMM8: + disp &= 0x000000ff; + goto displace_or_inc; + case IMM16: + disp &= 0x0000ffff; + goto displace_or_inc; case IMM24: disp &= 0x00ffffff; goto displace_or_inc; -- cgit v0.10.2 From bd9384a9fdd6c15da6b01b2844c3471d07a45d64 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:50 +0000 Subject: MN10300: Don't handle misaligned loading and storing of SP Don't handle the misaligned loading and storing of the SP register as in C code that's most certainly a compiler bug. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index e247a6e..7b670a3 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -204,8 +204,6 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, { "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}}, { "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}}, -{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}}, -{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}}, { "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, -- cgit v0.10.2 From 58a47481b6ecb6dd05ab4a788e1f2ae3c7c46f57 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:55 +0000 Subject: MN10300: Don't do misalignment handling for userspace Don't do misalignment handling for userspace misalignment faults: just generate an appropriate SIGBUS instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 7b670a3..94c4a43 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -329,10 +329,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; + /* we don't fix up userspace misalignment faults */ if (user_mode(regs)) - sp = regs->sp; - else - sp = (unsigned long) regs + sizeof(*regs); + goto bus_error; + + sp = (unsigned long) regs + sizeof(*regs); kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); @@ -386,15 +387,15 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) } /* didn't manage to find a fixup */ - if (!user_mode(regs)) - printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", - regs->pc, opcode); + printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", + regs->pc, opcode); failed: set_fs(seg); if (die_if_no_fixup("misalignment error", regs, code)) return; +bus_error: info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = BUS_ADRALN; @@ -404,31 +405,27 @@ failed: /* error reading opcodes */ fetch_error: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %p: fault whilst reading instruction data\n", - pc); + printk(KERN_CRIT + "MISALIGN: %p: fault whilst reading instruction data\n", + pc); goto failed; bad_addr_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported addressing mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported addressing mode %x\n", + regs->pc, opcode); goto failed; bad_reg_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported register mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported register mode %x\n", + regs->pc, opcode); goto failed; unsupported_instruction: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported instruction %x (%s)\n", - regs->pc, opcode, pop->name); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported instruction %x (%s)\n", + regs->pc, opcode, pop->name); goto failed; transfer_failed: @@ -476,16 +473,14 @@ found_opcode: kdebug("disp=%lx", disp); set_fs(KERNEL_XDS); - if (fixup || regs->epsw & EPSW_nSL) + if (fixup) set_fs(seg); tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000; if (!tmp) { - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx:" - " insn not move to/from memory %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: insn not move to/from memory %x\n", + regs->pc, opcode); goto failed; } @@ -548,7 +543,6 @@ found_opcode: misalignment_MOV_Lcc(regs, opcode); set_fs(seg); - return; } /* -- cgit v0.10.2 From 5cbd54ef470d880fc37fbe4b21eb514806d51e0d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 20:05:50 +0100 Subject: sched: fix init_idle()'s use of sched_clock() Maciej Rutecki reported: > I have this bug during suspend to disk: > > [ 188.592151] Enabling non-boot CPUs ... > [ 188.592151] SMP alternatives: switching to SMP code > [ 188.666058] BUG: using smp_processor_id() in preemptible > [00000000] > code: suspend_to_disk/2934 > [ 188.666064] caller is native_sched_clock+0x2b/0x80 Which, as noted by Linus, was caused by me, via: 7cbaef9c "sched: optimize sched_clock() a bit" Move the rq locking a bit earlier in the initialization sequence, that will make the sched_clock() call in init_idle() non-preemptible. Reported-by: Maciej Rutecki Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 3bafbe3..c94baf2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5870,6 +5870,8 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) struct rq *rq = cpu_rq(cpu); unsigned long flags; + spin_lock_irqsave(&rq->lock, flags); + __sched_fork(idle); idle->se.exec_start = sched_clock(); @@ -5877,7 +5879,6 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) idle->cpus_allowed = cpumask_of_cpu(cpu); __set_task_cpu(idle, cpu); - spin_lock_irqsave(&rq->lock, flags); rq->curr = rq->idle = idle; #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW) idle->oncpu = 1; -- cgit v0.10.2 From 8f7c41d4cec91cdbfa89b4a77d5a628938875366 Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Mon, 10 Nov 2008 19:39:25 -0600 Subject: rtl8187: Add Abocom USB ID Signed-off-by: Ivan Kuten Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c7..0ce9fb0 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; -- cgit v0.10.2 From db7fb86b0ca565cf3537401612581a8158025cc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Nov 2008 11:28:04 +0100 Subject: mac80211: fix notify_mac function The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which in turn calls ieee80211_set_disassoc() which calls a few functions that need to be able to sleep, so ieee80211_notify_mac() cannot use RCU locking for the interface list and must use rtnl locking instead. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 87665d7b..14d165f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2570,14 +2570,14 @@ void ieee80211_notify_mac(struct ieee80211_hw *hw, switch (notif_type) { case IEEE80211_NOTIFY_RE_ASSOC: - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { + rtnl_lock(); + list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type != NL80211_IFTYPE_STATION) continue; ieee80211_sta_req_auth(sdata, &sdata->u.sta); } - rcu_read_unlock(); + rtnl_unlock(); break; } } -- cgit v0.10.2 From f3c769185a28b7947d97b3552a977102c1fac3f2 Mon Sep 17 00:00:00 2001 From: Bob Jolliffe Date: Wed, 12 Nov 2008 20:16:59 +0000 Subject: rtl8187 : support for Sitecom WL-168 0001 v4 the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's RTL8187B and work fine with new 2.6.27 driver. Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ce9fb0..69eb013 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, /* Abocom */ {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} -- cgit v0.10.2 From f7cd168645dda3e9067f24fabbfa787f9a237488 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Nov 2008 16:54:22 -0500 Subject: hostap: pad the skb->cb usage in lieu of a proper fix Like mac80211 did, this driver makes 'clever' use of skb->cb to pass information along with an skb as it is requeued from the virtual device to the physical wireless device. Unfortunately, that trick no longer works... Unlike mac80211, code complexity and driver apathy makes this hack the best option we have in the short run. Hopefully someone will eventually be motivated to code a proper fix before all the effected hardware dies. (Above text by me. Johannes officially disavows all knowledge of this hack. -- JWL) Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf487..a68f97c 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) -- cgit v0.10.2 From e23a59e1ca6d177a57a7791b3629db93ff1d9813 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Nov 2008 14:32:54 -0800 Subject: niu: Fix readq implementation when architecture does not provide one. This fixes a TX hang reported by Jesper Dangaard Brouer. When an architecutre cannot provide a fully functional 64-bit atomic readq/writeq, the driver must implement it's own. This is because only the driver can say whether doing something like using two 32-bit reads to implement the full 64-bit read will actually work properly. In particular one of the issues is whether the top 32-bits or the bottom 32-bits of the 64-bit register should be read first. There could be side effects, and in fact that is exactly the problem here. The TX_CS register has counters in the upper 32-bits and state bits in the lower 32-bits. A read clears the state bits. We would read the counter half before the state bit half. That first read would clear the state bits, and then the driver thinks that no interrupts are pending because the interrupt indication state bits are seen clear every time. Fix this by reading the bottom half before the upper half. Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d7..d8463b1 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) -- cgit v0.10.2 From b2af2c1d3e4ddeea9d02c46d0df0c322cc7b7061 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 12 Nov 2008 16:23:44 -0800 Subject: bnx2: fix poll_controller to pass proper structures and check all rx queues Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by: Neil Horman Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430..d07e3f1 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7204,10 +7204,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif -- cgit v0.10.2 From 7526674de0c921e7f1e9b6f71a1f9d832557b554 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Wed, 12 Nov 2008 13:24:56 -0800 Subject: hugetlb: make unmap_ref_private multi-size-aware Oops. Part of the hugetlb private reservation code was not fully converted to use hstates. When a huge page must be unmapped from VMAs due to a failed COW, HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of the page size being used. This works if the VMA is using the default huge page size. Otherwise we might unmap too much, too little, or trigger a BUG_ON. Rare but serious -- fix it. Signed-off-by: Adam Litke Cc: Jon Tollefson Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d143ab6..6058b53 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1796,6 +1796,7 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, struct page *page, unsigned long address) { + struct hstate *h = hstate_vma(vma); struct vm_area_struct *iter_vma; struct address_space *mapping; struct prio_tree_iter iter; @@ -1805,7 +1806,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, * vm_pgoff is in PAGE_SIZE units, hence the different calculation * from page cache lookup which is in HPAGE_SIZE units. */ - address = address & huge_page_mask(hstate_vma(vma)); + address = address & huge_page_mask(h); pgoff = ((address - vma->vm_start) >> PAGE_SHIFT) + (vma->vm_pgoff >> PAGE_SHIFT); mapping = (struct address_space *)page_private(page); @@ -1824,7 +1825,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, */ if (!is_vma_resv_set(iter_vma, HPAGE_RESV_OWNER)) unmap_hugepage_range(iter_vma, - address, address + HPAGE_SIZE, + address, address + huge_page_size(h), page); } -- cgit v0.10.2 From 468cc0320ed083e26364d9febde2679d981ed6a6 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 12 Nov 2008 13:24:58 -0800 Subject: hwmon: applesmc: add support for Macbook 4 This patch adds accelerometer and temperature sensor support for Macbook 4. Signed-off-by: Henrik Rydberg Cc: Nicolas Boichat Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index be32859..488e45c 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1280,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 4 }, /* iMac: temperature set 5 */ { .accelerometer = 0, .light = 0, .temperature_set = 5 }, -/* MacBook3: accelerometer and temperature set 6 */ +/* MacBook3, MacBook4: accelerometer and temperature set 6 */ { .accelerometer = 1, .light = 0, .temperature_set = 6 }, /* MacBook Air: accelerometer, backlight and temperature set 7 */ { .accelerometer = 1, .light = 1, .temperature_set = 7 }, @@ -1329,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 4", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") }, + &applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, -- cgit v0.10.2 From 722faccc7eb0a9b248fba3e7020b1c3770c41aef Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Nov 2008 13:24:59 -0800 Subject: atmel_lcdfb: change irq_base definition to allow error reporting Changed because old the definition of unsigned long cannot be negative. Signed-off-by: Nicolas Ferre Reported-by: Roel Kluin Cc: Haavard Skinnemoen Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 6ad87f4..0c864db 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -38,7 +38,7 @@ struct atmel_lcdfb_info { spinlock_t lock; struct fb_info *info; void __iomem *mmio; - unsigned long irq_base; + int irq_base; struct work_struct task; unsigned int guard_time; -- cgit v0.10.2 From fe2d5ffc74a1de6a31e9fd65b65cce72d881edf7 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:00 -0800 Subject: Fix platform drivers that crash on suspend/resume It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by: Darrick J. Wong Acked-by: Corey Minyard Cc: Jean Delvare Cc: Kay Sievers Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa..7a88dfd 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf5..3000135 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 7b0ed5d..fe74609 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -88,9 +88,11 @@ static DEFINE_IDR(aem_idr); static DEFINE_SPINLOCK(aem_idr_lock); -static struct device_driver aem_driver = { - .name = DRVNAME, - .bus = &platform_bus_type, +static struct platform_driver aem_driver = { + .driver = { + .name = DRVNAME, + .bus = &platform_bus_type, + } }; struct aem_ipmi_data { @@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe, data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -1085,7 +1087,7 @@ static int __init aem_init(void) { int res; - res = driver_register(&aem_driver); + res = driver_register(&aem_driver.driver); if (res) { printk(KERN_ERR "Can't register aem driver\n"); return res; @@ -1097,7 +1099,7 @@ static int __init aem_init(void) return 0; ipmi_reg_err: - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); return res; } @@ -1107,7 +1109,7 @@ static void __exit aem_exit(void) struct aem_data *p1, *next1; ipmi_smi_watcher_unregister(&driver_data.bmc_events); - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) aem_delete(p1); } -- cgit v0.10.2 From f0f7e0dc7393268947dc3ed285defc3d375487b9 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:36 -0800 Subject: i5000-edac: hold reference to mci kobject It turns out that edac_mc_del_mc will kobject_put the last kref on the mci object. If the timing is just right, that means that the mci object is freed before before i5000_remove_one has a chance to free the resources associated with it, causing a null pointer exceptions when unloading the driver. Insert a kobject_{get,put} pair so that this doesn't happen. Signed-off-by: Darrick J. Wong Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index f0d9b41..d335086 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; + kobject_get(&mci->edac_mci_kobj); debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); mci->dev = &pdev->dev; /* record ptr to the generic device */ @@ -1453,6 +1454,7 @@ fail1: i5000_put_devices(mci); fail0: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); return -ENODEV; } @@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev) /* retrieve references to resources, and free those resources */ i5000_put_devices(mci); - + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); } -- cgit v0.10.2 From e33c3b5e172e2e45456f42fba47227d48745543f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 12 Nov 2008 13:25:37 -0800 Subject: cpusets: update mems allowed in page allocator If all allowable memory is unreclaimable, it is possible to loop forever in the page allocator for ~__GFP_NORETRY allocations. During this time, it is also possible for a task's cpuset to expand its set of allowable nodes so that it now includes free memory. The cached copy of this set, current->mems_allowed, is stale, however, since there has not been a subsequent call to cpuset_update_task_memory_state(). The cached copy of the set of allowable nodes is now updated in the page allocator's slow path so the additional memory is available to get_page_from_freelist(). [akpm@linux-foundation.org: add comment] Signed-off-by: David Rientjes Cc: Paul Menage Cc: Christoph Lameter Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 54069e6..d8ac014 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1561,6 +1561,10 @@ nofail_alloc: /* We now go into synchronous reclaim */ cpuset_memory_pressure_bump(); + /* + * The task's cpuset might have expanded its set of allowable nodes + */ + cpuset_update_task_memory_state(); p->flags |= PF_MEMALLOC; reclaim_state.reclaimed_slab = 0; p->reclaim_state = &reclaim_state; -- cgit v0.10.2 From 0bcb6069a6e1af5c114a2a8873ec43ada8933596 Mon Sep 17 00:00:00 2001 From: John Linn Date: Wed, 12 Nov 2008 13:25:38 -0800 Subject: GPIO: add new Xilinx driver for powerpc This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya Signed-off-by: John Linn Cc: David Brownell Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Kumar Gala Cc: "Grant Likely" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7f2ee27..48f49d9 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6aafdeb..49ac64e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 0000000..3c1177a --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,235 @@ +/* + * Xilinx gpio driver + * + * Copyright 2008 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + u32 gpio_state; /* GPIO state shadow register */ + u32 gpio_dir; /* GPIO direction shadow register */ + spinlock_t gpio_lock; /* Lock used for synchronization */ +}; + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. It returns 0 if + * the signal clear, 1 if signal is set or negative value on error. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1; +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function sets the direction of specified GPIO signal as input. + * It returns 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir |= (1 << gpio); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. If all + * GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir &= (~(1 << gpio)); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @np: pointer to device tree node + * + * This function probes the GPIO device in the device tree. It initializes the + * driver data structure. It returns 0, if the driver is bound to the GPIO + * device, or a negative value if there is an error. + */ +static int __devinit xgpio_of_probe(struct device_node *np) +{ + struct xgpio_instance *chip; + struct of_gpio_chip *ofchip; + int status = 0; + const u32 *tree_info; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + ofchip = &chip->mmchip.of_gc; + + /* Update GPIO state shadow register with default value */ + tree_info = of_get_property(np, "xlnx,dout-default", NULL); + if (tree_info) + chip->gpio_state = *tree_info; + + /* Update GPIO direction shadow register with default value */ + chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */ + tree_info = of_get_property(np, "xlnx,tri-default", NULL); + if (tree_info) + chip->gpio_dir = *tree_info; + + /* Check device node and parent device node for device width */ + ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */ + tree_info = of_get_property(np, "xlnx,gpio-width", NULL); + if (!tree_info) + tree_info = of_get_property(np->parent, + "xlnx,gpio-width", NULL); + if (tree_info) + ofchip->gc.ngpio = *tree_info; + + spin_lock_init(&chip->gpio_lock); + + ofchip->gpio_cells = 2; + ofchip->gc.direction_input = xgpio_dir_in; + ofchip->gc.direction_output = xgpio_dir_out; + ofchip->gc.get = xgpio_get; + ofchip->gc.set = xgpio_set; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add(np, &chip->mmchip); + if (status) { + kfree(chip); + pr_err("%s: error in probe function with status %d\n", + np->full_name, status); + return status; + } + pr_info("XGpio: %s: registered\n", np->full_name); + return 0; +} + +static struct of_device_id xgpio_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +static int __init xgpio_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, xgpio_of_match) + xgpio_of_probe(np); + + return 0; +} + +/* Make sure we get initialized before anyone else tries to use us */ +subsys_initcall(xgpio_init); +/* No exit call at the moment as we cannot unregister of GPIO chips */ + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 687446760bd008df96655cb8c5900f8e48a7118c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:49 -0800 Subject: freezer_cg: remove task_lock from freezer_fork() In theory the task can be moved to another cgroup and the freezer will be freed right after task_lock is dropped, so the lock results in zero protection. But in the case of freezer_fork() no lock is needed, since the task is not in tasklist yet so it won't be moved to another cgroup, so task->cgroups won't be changed or invalidated. Signed-off-by: Li Zefan Cc: Matt Helsley Cc: Cedric Le Goater Cc: "Serge E. Hallyn" Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 7fa476f..6605907 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -184,9 +184,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) { struct freezer *freezer; - task_lock(task); + /* + * No lock is needed, since the task isn't on tasklist yet, + * so it can't be moved to another cgroup, which means the + * freezer won't be removed and will be valid during this + * function call. + */ freezer = task_freezer(task); - task_unlock(task); spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); -- cgit v0.10.2 From 3b1b3f6e57064aa8f91c290fe51cda4c74642902 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:50 -0800 Subject: freezer_cg: disable writing freezer.state of root cgroup With this change, control file 'freezer.state' doesn't exist in root cgroup, making root cgroup unfreezable. I think it's reasonable to disallow freeze tasks in the root cgroup. And then we can avoid fork overhead when freezer subsystem is compiled but not used. Also make writing invalid value to freezer.state returns EINVAL rather than EIO. This is more consistent with other cgroup subsystem. Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: Cedric Le Goater Cc: Paul Menage Cc: Matt Helsley Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c50ab58..41f37fe 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -1,4 +1,4 @@ - The cgroup freezer is useful to batch job management system which start +The cgroup freezer is useful to batch job management system which start and stop sets of tasks in order to schedule the resources of a machine according to the desires of a system administrator. This sort of program is often used on HPC clusters to schedule access to the cluster as a @@ -6,7 +6,7 @@ whole. The cgroup freezer uses cgroups to describe the set of tasks to be started/stopped by the batch job management system. It also provides a means to start and stop the tasks composing the job. - The cgroup freezer will also be useful for checkpointing running groups +The cgroup freezer will also be useful for checkpointing running groups of tasks. The freezer allows the checkpoint code to obtain a consistent image of the tasks by attempting to force the tasks in a cgroup into a quiescent state. Once the tasks are quiescent another task can @@ -16,7 +16,7 @@ recoverable error occur. This also allows the checkpointed tasks to be migrated between nodes in a cluster by copying the gathered information to another node and restarting the tasks there. - Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping +Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping and resuming tasks in userspace. Both of these signals are observable from within the tasks we wish to freeze. While SIGSTOP cannot be caught, blocked, or ignored it can be seen by waiting or ptracing parent tasks. @@ -37,26 +37,29 @@ demonstrate this problem using nested bash shells: - This happens because bash can observe both signals and choose how it +This happens because bash can observe both signals and choose how it responds to them. - Another example of a program which catches and responds to these +Another example of a program which catches and responds to these signals is gdb. In fact any program designed to use ptrace is likely to have a problem with this method of stopping and resuming tasks. - In contrast, the cgroup freezer uses the kernel freezer code to +In contrast, the cgroup freezer uses the kernel freezer code to prevent the freeze/unfreeze cycle from becoming visible to the tasks being frozen. This allows the bash example above and gdb to run as expected. - The freezer subsystem in the container filesystem defines a file named +The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup. Reading will return the current state. +Note freezer.state doesn't exist in root cgroup, which means root cgroup +is non-freezable. + * Examples of usage : - # mkdir /containers/freezer + # mkdir /containers # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks @@ -94,6 +97,6 @@ things happens: the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal - and returns EIO) + and returns EINVAL) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 6605907..fb249e2 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -192,6 +192,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) */ freezer = task_freezer(task); + /* + * The root cgroup is non-freezable, so we can skip the + * following check. + */ + if (!freezer->css.cgroup->parent) + return; + spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); @@ -335,7 +342,7 @@ static int freezer_write(struct cgroup *cgroup, else if (strcmp(buffer, freezer_state_strs[CGROUP_FROZEN]) == 0) goal_state = CGROUP_FROZEN; else - return -EIO; + return -EINVAL; if (!cgroup_lock_live_group(cgroup)) return -ENODEV; @@ -354,6 +361,8 @@ static struct cftype files[] = { static int freezer_populate(struct cgroup_subsys *ss, struct cgroup *cgroup) { + if (!cgroup->parent) + return 0; return cgroup_add_files(cgroup, ss, files, ARRAY_SIZE(files)); } -- cgit v0.10.2 From a189d0350f387786b1fb5a5d19e3a5ab0bc0cceb Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 12 Nov 2008 13:26:51 -0800 Subject: kprobes: disable preempt for module_text_address() and kernel_text_address() __register_kprobe() can be preempted after checking probing address but before module_text_address() or try_module_get(), and in this interval the module can be unloaded. In that case, try_module_get(probed_mod) will access to invalid address, or kprobe will probe invalid address. This patch uses preempt_disable() to protect it and uses __module_text_address() and __kernel_text_address(). Signed-off-by: Lai Jiangshan Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Hiroshi Shimamoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 8b57a25..f83c5e4 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -613,30 +613,37 @@ static int __kprobes __register_kprobe(struct kprobe *p, return -EINVAL; p->addr = addr; - if (!kernel_text_address((unsigned long) p->addr) || - in_kprobes_functions((unsigned long) p->addr)) + preempt_disable(); + if (!__kernel_text_address((unsigned long) p->addr) || + in_kprobes_functions((unsigned long) p->addr)) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 0; /* * Check if are we probing a module. */ - probed_mod = module_text_address((unsigned long) p->addr); + probed_mod = __module_text_address((unsigned long) p->addr); if (probed_mod) { - struct module *calling_mod = module_text_address(called_from); + struct module *calling_mod; + calling_mod = __module_text_address(called_from); /* * We must allow modules to probe themself and in this case * avoid incrementing the module refcount, so as to allow * unloading of self probing modules. */ if (calling_mod && calling_mod != probed_mod) { - if (unlikely(!try_module_get(probed_mod))) + if (unlikely(!try_module_get(probed_mod))) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 1; } else probed_mod = NULL; } + preempt_enable(); p->nmissed = 0; INIT_LIST_HEAD(&p->list); @@ -718,6 +725,10 @@ static void __kprobes __unregister_kprobe_bottom(struct kprobe *p) struct kprobe *old_p; if (p->mod_refcounted) { + /* + * Since we've already incremented refcount, + * we don't need to disable preemption. + */ mod = module_text_address((unsigned long)p->addr); if (mod) module_put(mod); -- cgit v0.10.2 From 8891d6da17db0f9bb507d3a017f130b9970c3087 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Wed, 12 Nov 2008 13:26:53 -0800 Subject: mm: remove lru_add_drain_all() from the munlock path lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [] check_noncircular+0x82/0x110 [] might_fault+0x4a/0xa0 [] validate_chain+0xb11/0x1070 [] might_fault+0x4a/0xa0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [] might_fault+0x4a/0xa0 [] might_fault+0x7b/0xa0 [] might_fault+0x4a/0xa0 [] copy_to_user+0x30/0x60 [] filldir+0x7c/0xd0 [] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [] filldir+0x0/0xd0 [] filldir+0x0/0xd0 [] vfs_readdir+0x86/0xa0 (*) grab i_mutex [] sys_getdents+0x6b/0xc0 [] syscall_call+0x7/0xb [] 0xffffffff -> #2 (sysfs_mutex){--..}: [] check_noncircular+0x82/0x110 [] sysfs_addrm_start+0x2c/0xc0 [] validate_chain+0xb11/0x1070 [] sysfs_addrm_start+0x2c/0xc0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [] sysfs_addrm_start+0x2c/0xc0 [] mutex_lock_nested+0xa5/0x2f0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] create_dir+0x3f/0x90 [] sysfs_create_dir+0x29/0x50 [] _spin_unlock+0x25/0x40 [] kobject_add_internal+0xcd/0x1a0 [] kobject_set_name_vargs+0x3a/0x50 [] kobject_init_and_add+0x2d/0x40 [] sysfs_slab_add+0xd2/0x180 [] sysfs_add_func+0x0/0x70 [] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [] run_workqueue+0x172/0x200 [] run_workqueue+0x10f/0x200 [] worker_thread+0x0/0xf0 [] worker_thread+0x9c/0xf0 [] autoremove_wake_function+0x0/0x50 [] worker_thread+0x0/0xf0 [] kthread+0x42/0x70 [] kthread+0x0/0x70 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #1 (slub_lock){----}: [] check_noncircular+0xd/0x110 [] slab_cpuup_callback+0x11f/0x1d0 [] validate_chain+0xb11/0x1070 [] slab_cpuup_callback+0x11f/0x1d0 [] mark_lock+0x35d/0xd00 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] slab_cpuup_callback+0x11f/0x1d0 [] down_read+0x43/0x80 [] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [] slab_cpuup_callback+0x11f/0x1d0 [] notifier_call_chain+0x3c/0x70 [] _cpu_up+0x84/0x110 [] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [] kernel_init+0x0/0x170 [] kernel_init+0xb5/0x170 [] kernel_init+0x0/0x170 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 (*) grab mmap_sem [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb [] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [] print_circular_bug_tail+0x7c/0xd0 [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb Signed-off-by: KOSAKI Motohiro Tested-by: Kamalesh Babulal Cc: Lee Schermerhorn Cc: Christoph Lameter Cc: Heiko Carstens Cc: Nick Piggin Cc: Hugh Dickins Cc: Rik van Riel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/mlock.c b/mm/mlock.c index 008ea70..a6da2ae 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -66,14 +66,10 @@ void __clear_page_mlock(struct page *page) putback_lru_page(page); } else { /* - * Page not on the LRU yet. Flush all pagevecs and retry. + * We lost the race. the page already moved to evictable list. */ - lru_add_drain_all(); - if (!isolate_lru_page(page)) - putback_lru_page(page); - else if (PageUnevictable(page)) + if (PageUnevictable(page)) count_vm_event(UNEVICTABLE_PGSTRANDED); - } } @@ -187,8 +183,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, if (vma->vm_flags & VM_WRITE) gup_flags |= GUP_FLAGS_WRITE; - lru_add_drain_all(); /* push cached pages to LRU */ - while (nr_pages > 0) { int i; @@ -251,8 +245,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, ret = 0; } - lru_add_drain_all(); /* to update stats */ - return ret; /* count entire vma as locked_vm */ } @@ -546,6 +538,8 @@ asmlinkage long sys_mlock(unsigned long start, size_t len) if (!can_do_mlock()) return -EPERM; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); len = PAGE_ALIGN(len + (start & ~PAGE_MASK)); start &= PAGE_MASK; @@ -612,6 +606,8 @@ asmlinkage long sys_mlockall(int flags) if (!can_do_mlock()) goto out; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur; -- cgit v0.10.2 From afef80b3d87cae574b8c6b763505f25b74d254ef Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 12 Nov 2008 13:26:54 -0800 Subject: vfs: fix shrink_submounts In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by: Eric W. Biederman Cc: Alexey Dobriyan Cc: Al Viro Signed-off-by: Linus Torvalds diff --git a/fs/namespace.c b/fs/namespace.c index cce4670..65b3dc8 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1815,8 +1815,8 @@ static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts) while (!list_empty(&graveyard)) { m = list_first_entry(&graveyard, struct vfsmount, mnt_expire); - touch_mnt_namespace(mnt->mnt_ns); - umount_tree(mnt, 1, umounts); + touch_mnt_namespace(m->mnt_ns); + umount_tree(m, 1, umounts); } } } -- cgit v0.10.2 From b76f90b526737070302a127c710263e2ac707676 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: remove ratelimt() It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 18a5b9b..00044b8 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -17,11 +17,4 @@ struct ratelimit_state { struct ratelimit_state name = {interval, burst,} extern int __ratelimit(struct ratelimit_state *rs); - -static inline int ratelimit(void) -{ - static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - return __ratelimit(&rs); -} #endif -- cgit v0.10.2 From b67ad18b06701b77ca8bfe9bb760c5c9e765e3cf Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: DOC: add printk-formats.txt Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. Signed-off-by: Randy Dunlap Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85c..50f99ea 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -290,6 +290,8 @@ powerpc/ - directory with info on using Linux with the PowerPC. preempt-locking.txt - info on locking under a preemptive kernel. +printk-formats.txt + - how to get printk format specifiers right prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. ramdisk.txt diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt new file mode 100644 index 0000000..1b5a5dd --- /dev/null +++ b/Documentation/printk-formats.txt @@ -0,0 +1,35 @@ +If variable is of Type, use printk format specifier: +--------------------------------------------------------- + int %d or %x + unsigned int %u or %x + long %ld or %lx + unsigned long %lu or %lx + long long %lld or %llx + unsigned long long %llu or %llx + size_t %zu or %zx + ssize_t %zd or %zx + +Raw pointer value SHOULD be printed with %p. + +u64 SHOULD be printed with %llu/%llx, (unsigned long long): + + printk("%llu", (unsigned long long)u64_var); + +s64 SHOULD be printed with %lld/%llx, (long long): + + printk("%lld", (long long)s64_var); + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent +for its size (e.g., tcflag_t), use a format specifier of its largest +possible type and explicitly cast to it. Example: + + printk("test: sector number/total blocks: %llu/%llu\n", + (unsigned long long)sector, (unsigned long long)blockcount); + +Reminder: sizeof() result is of type size_t. + +Thank you for your cooperation and attention. + + +By Randy Dunlap -- cgit v0.10.2 From 084c304980f05833bc8a91b856af7dc7a7bb7d60 Mon Sep 17 00:00:00 2001 From: Marco Stornelli Date: Wed, 12 Nov 2008 13:26:56 -0800 Subject: DOC: update xip method info xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by: Marco Stornelli Signed-off-by: Randy Dunlap Cc: Carsten Otte Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/filesystems/xip.txt b/Documentation/filesystems/xip.txt index 3cc4010..0466ee5 100644 --- a/Documentation/filesystems/xip.txt +++ b/Documentation/filesystems/xip.txt @@ -39,10 +39,11 @@ The block device operation is optional, these block devices support it as of today: - dcssblk: s390 dcss block device driver -An address space operation named get_xip_page is used to retrieve reference -to a struct page. To address the target page, a reference to an address_space, -and a sector number is provided. A 3rd argument indicates whether the -function should allocate blocks if needed. +An address space operation named get_xip_mem is used to retrieve references +to a page frame number and a kernel address. To obtain these values a reference +to an address_space is provided. This function assigns values to the kmem and +pfn parameters. The third argument indicates whether the function should allocate +blocks if needed. This address space operation is mutually exclusive with readpage&writepage that do page cache read/write operations. -- cgit v0.10.2 From 7e036d040a28bf95255d7eb9faf0ffbba3677e99 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: kernel/kprobes.c: don't pad kretprobe_table_locks[] on uniprocessor builds We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kprobes.c b/kernel/kprobes.c index f83c5e4..9f8a3f2 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -72,7 +72,7 @@ static bool kprobe_enabled; DEFINE_MUTEX(kprobe_mutex); /* Protects kprobe_table */ static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL; static struct { - spinlock_t lock ____cacheline_aligned; + spinlock_t lock ____cacheline_aligned_in_smp; } kretprobe_table_locks[KPROBE_TABLE_SIZE]; static spinlock_t *kretprobe_table_lock_ptr(unsigned long hash) -- cgit v0.10.2 From 05a9bd46e49a9cbb09a0c61c901642a9911bf56e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: adt7470: check input range when sysfs files are written Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f..1311a59 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7470_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; -- cgit v0.10.2 From 862343c4ea2ece307f25db1812637cff142d3263 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:58 -0800 Subject: adt7473: check inputs from sysfs writes Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index b9a8ea3..18aa308 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7473_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw) static u8 encode_temp(u8 twos_complement, int cooked) { - return twos_complement ? cooked & 0xFF : cooked + 64; + u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; + return SENSORS_LIMIT(ret, 0, 255); } static ssize_t show_temp_min(struct device *dev, @@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: -- cgit v0.10.2 From 79b92f2bab0dc5ac70e8391548f75ac3268426e4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:59 -0800 Subject: lm85: support adt7468 chips The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3ff0285..cfc1ee9 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -39,7 +39,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, + emc6d102); /* The LM85 registers */ @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 0x01 +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) + /* These are the recognized values for the above regs */ #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 @@ -306,6 +315,7 @@ struct lm85_data { u8 vid; /* Register value */ u8 vrm; /* VRM version */ u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; }; @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_ADT7463C: kind = adt7463; break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + kind = adt7468; + break; } } else if (company == LM85_COMPANY_SMSC) { switch (verstep) { @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind, case adt7463: type_name = "adt7463"; break; + case adt7468: + type_name = "adt7468"; + break; case emc6d100: type_name = "emc6d100"; break; @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client, if (err) goto err_kfree; - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(client, LM85_REG_VID); - if (!(data->type == adt7463 && (data->vid & 0x80))) + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto err_remove_files; @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if (data->type == adm1027 || data->type == adt7463) { + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); } + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN_MIN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in_min[4] = lm85_read_value(client, LM85_REG_IN_MIN(4)); data->in_max[4] = lm85_read_value(client, @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); data->zone[i].critical = lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); -- cgit v0.10.2 From 50d7d5bf3168db5d04566dd7ffb9a820e9fdf484 Mon Sep 17 00:00:00 2001 From: Jean-Christophe Lallemand Date: Wed, 12 Nov 2008 13:27:00 -0800 Subject: atmel_spi: work-around required for new HW bug in AT91SAM9263 Rev.B SPI controller We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 02f9320..8abae4a 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ clk_enable(clk); spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); spi_writel(as, CR, SPI_BIT(SPIEN)); @@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) out_reset_hw: spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable(clk); free_irq(irq, master); out_unmap_regs: @@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) spin_lock_irq(&as->lock); as->stopping = 1; spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); spin_unlock_irq(&as->lock); -- cgit v0.10.2 From 6cdfcc275e40b89fb020da1088ead86a61d33115 Mon Sep 17 00:00:00 2001 From: Theodore Tso Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: ext3: Clean up outdated and incorrect comment for ext3_write_super() Signed-off-by: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 5dec6d1..f6c94f2 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2375,12 +2375,9 @@ int ext3_force_commit(struct super_block *sb) /* * Ext3 always journals updates to the superblock itself, so we don't * have to propagate any other updates to the superblock on disk at this - * point. Just start an async writeback to get the buffers on their way - * to the disk. - * - * This implicitly triggers the writebehind on sync(). + * point. (We can probably nuke this function altogether, and remove + * any mention to sb->s_dirt in all of fs/ext3; eventual cleanup...) */ - static void ext3_write_super (struct super_block * sb) { if (mutex_trylock(&sb->s_lock) != 0) -- cgit v0.10.2 From 33c5d3d64589c5d379db5a5615735f6d08438369 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: memcg: bugfix for memory hotplug The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by: Badari Pulavarty Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index f59d797..1223d92 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -165,7 +165,7 @@ int online_page_cgroup(unsigned long start_pfn, unsigned long start, end, pfn; int fail = 0; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) { @@ -188,7 +188,7 @@ int offline_page_cgroup(unsigned long start_pfn, { unsigned long start, end, pfn; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) -- cgit v0.10.2 From 455fbdd376c3ed3a5be8c039348896fdd87e9930 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 12 Nov 2008 13:27:02 -0800 Subject: LIS3LV02Dx Accelerometer driver This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: Eric Piel Signed-off-by: Yan Burman Signed-off-by: Pavel Machek Cc: "Mark M. Hoffman" Signed-off-by: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d new file mode 100644 index 0000000..65dfb0c --- /dev/null +++ b/Documentation/hwmon/lis3lv02d @@ -0,0 +1,49 @@ +Kernel driver lis3lv02d +================== + +Supported chips: + + * STMicroelectronics LIS3LV02DL and LIS3LV02DQ + +Author: + Yan Burman + Eric Piel + + +Description +----------- + +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models +(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will +have their axis automatically oriented on standard way (eg: you can directly +play neverball). The accelerometer data is readable via +/sys/devices/platform/lis3lv02d. + +Sysfs attributes under /sys/devices/platform/lis3lv02d/: +position - 3D position that the accelerometer reports. Format: "(x,y,z)" +calibrate - read: values (x, y, z) that are used as the base for input class device operation. + write: forces the base to be recalibrated with the current position. +rate - reports the sampling rate of the accelerometer device in HZ + +This driver also provides an absolute input class device, allowing +the laptop to act as a pinball machine-esque joystick. + +Axes orientation +---------------- + +For better compatibility between the various laptops. The values reported by +the accelerometer are converted into a "standard" organisation of the axes +(aka "can play neverball out of the box"): + * When the laptop is horizontal the position reported is about 0 for X and Y +and a positive value for Z + * If the left side is elevated, X increases (becomes positive) + * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) + * If the laptop is put upside-down, Z becomes negative + +If your laptop model is not recognized (cf "dmesg"), you can send an email to the +authors to add it to the database. When reporting a new laptop, please include +the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position +in these four cases. + diff --git a/MAINTAINERS b/MAINTAINERS index 272d04e..8e0777f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2703,6 +2703,11 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +LIS3LV02D ACCELEROMETER DRIVER +P: Eric Piel +M: eric.piel@tremplin-utc.net +S: Maintained + LM83 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6de1e0f..1c44f5c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -825,6 +825,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 042d5a7..e0d90a6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c new file mode 100644 index 0000000..752b5c4 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.c @@ -0,0 +1,582 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" +#define ACPI_MDPS_CLASS "accelerometer" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because their are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +/* Maximum value our axis may get for the input device (signed 12 bits) */ +#define MDPS_MAX_VAL 2048 + +struct axis_conversion { + s8 x; + s8 y; + s8 z; +}; + +struct acpi_lis3lv02d { + struct acpi_device *device; /* The ACPI device */ + struct input_dev *idev; /* input device */ + struct task_struct *kthread; /* kthread for input */ + struct mutex lock; + struct platform_device *pdev; /* platform device */ + atomic_t count; /* interrupt count after last read */ + int xcalib; /* calibrated null value for x */ + int ycalib; /* calibrated null value for y */ + int zcalib; /* calibrated null value for z */ + unsigned char is_on; /* whether the device is on or off */ + unsigned char usage; /* usage counter */ + struct axis_conversion ac; /* hw -> logical axis */ +}; + +static struct acpi_lis3lv02d adev; + +static int lis3lv02d_remove_fs(void); +static int lis3lv02d_add_fs(struct acpi_device *device); + +/* For automatic insertion of the module */ +static struct acpi_device_id lis3lv02d_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); + +/** + * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * @handle: the handle of the device + * + * Returns AE_OK on success. + */ +static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle) +{ + return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL); +} + +/** + * lis3lv02d_acpi_read - ACPI ALRD method: read a register + * @handle: the handle of the device + * @reg: the register to read + * @ret: result of the operation + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret) +{ + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + unsigned long long lret; + acpi_status status; + + arg0.integer.value = reg; + + status = acpi_evaluate_integer(handle, "ALRD", &args, &lret); + *ret = lret; + return status; +} + +/** + * lis3lv02d_acpi_write - ACPI ALWR method: write to a register + * @handle: the handle of the device + * @reg: the register to write to + * @val: the value to write + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val) +{ + unsigned long long ret; /* Not used when writting */ + union acpi_object in_obj[2]; + struct acpi_object_list args = { 2, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = val; + + return acpi_evaluate_integer(handle, "ALWR", &args, &ret); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + lis3lv02d_acpi_read(handle, reg, &lo); + lis3lv02d_acpi_read(handle, reg + 1, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @handle: the handle to the device + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) +{ + int position[3]; + + position[0] = lis3lv02d_read_16(handle, OUTX_L); + position[1] = lis3lv02d_read_16(handle, OUTY_L); + position[2] = lis3lv02d_read_16(handle, OUTZ_L); + + *x = lis3lv02d_get_axis(adev.ac.x, position); + *y = lis3lv02d_get_axis(adev.ac.y, position); + *z = lis3lv02d_get_axis(adev.ac.z, position); +} + +static inline void lis3lv02d_poweroff(acpi_handle handle) +{ + adev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00); +} + +static void lis3lv02d_poweron(acpi_handle handle) +{ + u8 val; + + adev.is_on = 1; + lis3lv02d_acpi_init(handle); + lis3lv02d_acpi_write(handle, FF_WU_CFG, 0); + /* + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + * IEN: Interrupt for free-fall and DD, not for data-ready. + */ + lis3lv02d_acpi_read(handle, CTRL_REG2, &val); + val |= CTRL2_BDU | CTRL2_IEN; + lis3lv02d_acpi_write(handle, CTRL_REG2, val); +} + +#ifdef CONFIG_PM +static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) +{ + /* make sure the device is off when we suspend */ + lis3lv02d_poweroff(device->handle); + return 0; +} + +static int lis3lv02d_resume(struct acpi_device *device) +{ + /* put back the device in the right state (ACPI might turn it on) */ + mutex_lock(&adev.lock); + if (adev.usage > 0) + lis3lv02d_poweron(device->handle); + else + lis3lv02d_poweroff(device->handle); + mutex_unlock(&adev.lock); + return 0; +} +#else +#define lis3lv02d_suspend NULL +#define lis3lv02d_resume NULL +#endif + + +/* + * To be called before starting to use the device. It makes sure that the + * device will always be on until a call to lis3lv02d_decrease_use(). Not to be + * used from interrupt context. + */ +static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage++; + if (dev->usage == 1) { + if (!dev->is_on) + lis3lv02d_poweron(dev->device->handle); + } + mutex_unlock(&dev->lock); +} + +/* + * To be called whenever a usage of the device is stopped. + * It will make sure to turn off the device when there is not usage. + */ +static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage--; + if (dev->usage == 0) + lis3lv02d_poweroff(dev->device->handle); + mutex_unlock(&dev->lock); +} + +/** + * lis3lv02d_joystick_kthread - Kthread polling function + * @data: unused - here to conform to threadfn prototype + */ +static int lis3lv02d_joystick_kthread(void *data) +{ + int x, y, z; + + while (!kthread_should_stop()) { + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + input_report_abs(adev.idev, ABS_X, x - adev.xcalib); + input_report_abs(adev.idev, ABS_Y, y - adev.ycalib); + input_report_abs(adev.idev, ABS_Z, z - adev.zcalib); + + input_sync(adev.idev); + + try_to_freeze(); + msleep_interruptible(MDPS_POLL_INTERVAL); + } + + return 0; +} + +static int lis3lv02d_joystick_open(struct input_dev *input) +{ + lis3lv02d_increase_use(&adev); + adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); + if (IS_ERR(adev.kthread)) { + lis3lv02d_decrease_use(&adev); + return PTR_ERR(adev.kthread); + } + + return 0; +} + +static void lis3lv02d_joystick_close(struct input_dev *input) +{ + kthread_stop(adev.kthread); + lis3lv02d_decrease_use(&adev); +} + + +static inline void lis3lv02d_calibrate_joystick(void) +{ + lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); +} + +static int lis3lv02d_joystick_enable(void) +{ + int err; + + if (adev.idev) + return -EINVAL; + + adev.idev = input_allocate_device(); + if (!adev.idev) + return -ENOMEM; + + lis3lv02d_calibrate_joystick(); + + adev.idev->name = "ST LIS3LV02DL Accelerometer"; + adev.idev->phys = DRIVER_NAME "/input0"; + adev.idev->id.bustype = BUS_HOST; + adev.idev->id.vendor = 0; + adev.idev->dev.parent = &adev.pdev->dev; + adev.idev->open = lis3lv02d_joystick_open; + adev.idev->close = lis3lv02d_joystick_close; + + set_bit(EV_ABS, adev.idev->evbit); + input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + + err = input_register_device(adev.idev); + if (err) { + input_free_device(adev.idev); + adev.idev = NULL; + } + + return err; +} + +static void lis3lv02d_joystick_disable(void) +{ + if (!adev.idev) + return; + + input_unregister_device(adev.idev); + adev.idev = NULL; +} + + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independant of the bus system. + */ +static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) +{ + mutex_init(&dev->lock); + lis3lv02d_add_fs(dev->device); + lis3lv02d_increase_use(dev); + + if (lis3lv02d_joystick_enable()) + printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + + lis3lv02d_decrease_use(dev); + return 0; +} + +static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) +{ + adev.ac = *((struct axis_conversion *)dmi->driver_data); + printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident); + + return 1; +} + +/* Represents, for each axis seen by userspace, the corresponding hw axis (+1). + * If the value is negative, the opposite of the hw value is used. */ +static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; +static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; + +#define AXIS_DMI_MATCH(_ident, _name, _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_PRODUCT_NAME, _name) \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} +static struct dmi_system_id lis3lv02d_dmi_ids[] = { + /* product names are truncated to match all kinds of a same model */ + AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), + AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted), + AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), + AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), + AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), + AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + { NULL, } +/* Laptop models without axis info (yet): + * "NC651xx" "HP Compaq 651" + * "NC671xx" "HP Compaq 671" + * "NC6910" "HP Compaq 6910" + * HP Compaq 8710x Notebook PC / Mobile Workstation + * "NC2400" "HP Compaq nc2400" + * "NX74x0" "HP Compaq nx74" + * "NX6325" "HP Compaq nx6325" + * "NC4400" "HP Compaq nc4400" + */ +}; + +static int lis3lv02d_add(struct acpi_device *device) +{ + u8 val; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); + if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + printk(KERN_ERR DRIVER_NAME + ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + } + + /* If possible use a "standard" axes order */ + if (dmi_check_system(lis3lv02d_dmi_ids) == 0) { + printk(KERN_INFO DRIVER_NAME ": laptop model unknown, " + "using default axes configuration\n"); + adev.ac = lis3lv02d_axis_normal; + } + + return lis3lv02d_init_device(&adev); +} + +static int lis3lv02d_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(device->handle); + + return lis3lv02d_remove_fs(); +} + + +/* Sysfs stuff */ +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_increase_use(&adev); + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + lis3lv02d_decrease_use(&adev); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib); +} + +static ssize_t lis3lv02d_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + lis3lv02d_increase_use(&adev); + lis3lv02d_calibrate_joystick(); + lis3lv02d_decrease_use(&adev); + return count; +} + +/* conversion btw sampling rate and the register values */ +static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560}; +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 ctrl; + int val; + + lis3lv02d_increase_use(&adev); + lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl); + lis3lv02d_decrease_use(&adev); + val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; + return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); +} + +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show, + lis3lv02d_calibrate_store); +static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + +static int lis3lv02d_add_fs(struct acpi_device *device) +{ + adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(adev.pdev)) + return PTR_ERR(adev.pdev); + + return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +static int lis3lv02d_remove_fs(void) +{ + sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(adev.pdev); + return 0; +} + +/* For the HP MDPS aka 3D Driveguard */ +static struct acpi_driver lis3lv02d_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = lis3lv02d_device_ids, + .ops = { + .add = lis3lv02d_add, + .remove = lis3lv02d_remove, + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + } +}; + +static int __init lis3lv02d_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&lis3lv02d_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit lis3lv02d_exit_module(void) +{ + acpi_bus_unregister_driver(&lis3lv02d_driver); +} + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init_module); +module_exit(lis3lv02d_exit_module); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h new file mode 100644 index 0000000..330cfc6 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.h @@ -0,0 +1,149 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to + * be connected via SPI. There exists also several similar chips (such as LIS302DL or + * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * They can also be connected via I²C. + */ + +#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ +#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ + +enum lis3lv02d_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3lv02d_ctrl1 { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + -- cgit v0.10.2 From c0b4e3ab0c769913438aeb078535ff117eeba5fb Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:03 -0800 Subject: adt7462: new hwmon driver New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 new file mode 100644 index 0000000..ec660b3 --- /dev/null +++ b/Documentation/hwmon/adt7462 @@ -0,0 +1,67 @@ +Kernel driver adt7462 +====================== + +Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7462 chip family. + +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It +can also measure 13 voltages or 4 temperatures, or various combinations of the +two. See the chip documentation for more details about the exact set of +configurations. This driver does not allow one to configure the chip; that is +left to the system designer. + +A sophisticated control system for the PWM outputs is designed into the ADT7462 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7462 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7462 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7462 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7462 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +The driver will report sensor labels when it is able to determine that +information from the configuration registers. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7462 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 1c44f5c..c709e82 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e0d90a6..58fc5be 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 0000000..66107b4 --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2002 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + /* Only the MSB of the min fan period is stored... */ + temp = data->fan_min[attr->index]; + temp <<= 8; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + temp = SENSORS_LIMIT(temp, 1, 255); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 15); + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); -- cgit v0.10.2 From a412ae3fb90ab49072b82c8cfa1e3e60d2b27005 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: ics932s401: new clock generator chip driver The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/ics932s401 b/Documentation/ics932s401 new file mode 100644 index 0000000..07a739f --- /dev/null +++ b/Documentation/ics932s401 @@ -0,0 +1,31 @@ +Kernel driver ics932s401 +====================== + +Supported chips: + * IDT ICS932S401 + Prefix: 'ics932s401' + Addresses scanned: I2C 0x69 + Datasheet: Publically available at the IDT website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the IDT ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4494ad2..dcac7ca 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -227,6 +227,16 @@ config HP_WMI To compile this driver as a module, choose M here: the module will be called hp-wmi. +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 909e246..bb14633 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c new file mode 100644 index 0000000..6e43ab4 --- /dev/null +++ b/drivers/misc/ics932s401.c @@ -0,0 +1,515 @@ +/* + * A driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); +static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); +static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); +static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); +static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); +static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); +static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); +static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); +static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); + +static struct attribute *ics932s401_attr[] = +{ + &dev_attr_spread_enabled.attr, + &dev_attr_cpu_clock_selection.attr, + &dev_attr_cpu_clock.attr, + &dev_attr_src_clock_selection.attr, + &dev_attr_src_clock.attr, + &dev_attr_pci_clock_selection.attr, + &dev_attr_pci_clock.attr, + &dev_attr_usb_clock.attr, + &dev_attr_ref_clock.attr, + &dev_attr_cpu_spread.attr, + &dev_attr_src_spread.attr, + NULL +}; + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int x; + + if (devattr == &dev_attr_usb_clock) + x = 48000; + else if (devattr == &dev_attr_ref_clock) + x = BASE_CLOCK; + else + BUG(); + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + if (devattr == &dev_attr_src_spread) + reg = ICS932S401_REG_SRC_SPREAD1; + else if (devattr == &dev_attr_cpu_spread) + reg = ICS932S401_REG_CPU_SPREAD1; + else + BUG(); + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); -- cgit v0.10.2 From 077eaf5b40ecb2c345d82f02275c20e965dfa3e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: rtc: rtc-wm8350: add support for WM8350 RTC This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown Cc: Alessandro Zummo Cc: David Brownell Cc: Liam Girdwood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb20..7951ad2 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -468,6 +468,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474..7a41201 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -66,4 +66,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 0000000..5c5e3aa --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); diff --git a/include/linux/mfd/wm8350/rtc.h b/include/linux/mfd/wm8350/rtc.h index dfda69e..24add2b 100644 --- a/include/linux/mfd/wm8350/rtc.h +++ b/include/linux/mfd/wm8350/rtc.h @@ -261,6 +261,8 @@ struct wm8350_rtc { struct platform_device *pdev; + struct rtc_device *rtc; + int alarm_enabled; /* used over suspend/resume */ }; #endif -- cgit v0.10.2 From a7fa9851b6dd18824320c4129f26947b3cdb63d8 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 12 Nov 2008 13:27:06 -0800 Subject: rtc: basic implementation of Epson RX-8581 I2C Real Time Clock Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch Signed-off-by: Alessandro Zummo Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7951ad2..990020c 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 7a41201..1636860 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 0000000..c9522f3 --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include +#include +#include +#include +#include + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch "); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); -- cgit v0.10.2 From 06de18085122b873012cb23f043e2bdcf5f50923 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Wed, 12 Nov 2008 13:27:07 -0800 Subject: rtc: add Dallas DS1390/93/94 RTC chips Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 990020c..123092d 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -310,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 1636860..6e79c91 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 0000000..599e976 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include +#include +#include +#include + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson "); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 34e453d45584ea9dc1f62833ace17c79a379deb4 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:08 -0800 Subject: w1: export w1_read_8 function Export the w1_read_8 function for use of drivers. The OMAP HDQ driver(drivers/w1/masters/omap_hdq.c) uses this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index cdaa6ff..97304bd 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl); u8 w1_triplet(struct w1_master *dev, int bdir); void w1_write_8(struct w1_master *, u8); +u8 w1_read_8(struct w1_master *); int w1_reset_bus(struct w1_master *); u8 w1_calc_crc8(u8 *, int); void w1_write_block(struct w1_master *, const u8 *, int); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index f4f82f1..0d15b0e 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir) * @param dev the master device * @return the byte read */ -static u8 w1_read_8(struct w1_master * dev) +u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; @@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev) return res; } +EXPORT_SYMBOL_GPL(w1_read_8); /** * Writes a series of bytes. -- cgit v0.10.2 From 9f2bc79f7dd04adda1fc3be510c9b3d436f846c7 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:09 -0800 Subject: hdq driver for OMAP2430/3430 The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware protocol of the master functions of the Benchmark HDQ and the Dallas Semiconductor 1-Wire protocols. These protocols use a single wire for communication between the master (HDQ/1-Wire controller) and the slave (HDQ/1-Wire external compliant device). This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms. Signed-off-by: Madhusudhan Chikkature Acked-by: Felipe Balbi Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c449309..a14d5b6 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -52,5 +52,12 @@ config W1_MASTER_GPIO This support is also available as a module. If so, the module will be called w1-gpio.ko. +config HDQ_MASTER_OMAP + tristate "OMAP HDQ driver" + depends on ARCH_OMAP2430 || ARCH_OMAP34XX + help + Say Y here if you want support for the 1-wire or HDQ Interface + on an OMAP processor. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1420b5b..bc4714a 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o +obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c new file mode 100644 index 0000000..1295625 --- /dev/null +++ b/drivers/w1/masters/omap_hdq.c @@ -0,0 +1,725 @@ +/* + * drivers/w1/masters/omap_hdq.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "../w1.h" +#include "../w1_int.h" + +#define MOD_NAME "OMAP_HDQ:" + +#define OMAP_HDQ_REVISION 0x00 +#define OMAP_HDQ_TX_DATA 0x04 +#define OMAP_HDQ_RX_DATA 0x08 +#define OMAP_HDQ_CTRL_STATUS 0x0c +#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) +#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) +#define OMAP_HDQ_CTRL_STATUS_GO (1<<4) +#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) +#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) +#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) +#define OMAP_HDQ_INT_STATUS 0x10 +#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) +#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) +#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) +#define OMAP_HDQ_SYSCONFIG 0x14 +#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) +#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) +#define OMAP_HDQ_SYSSTATUS 0x18 +#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) + +#define OMAP_HDQ_FLAG_CLEAR 0 +#define OMAP_HDQ_FLAG_SET 1 +#define OMAP_HDQ_TIMEOUT (HZ/5) + +#define OMAP_HDQ_MAX_USER 4 + +static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); +static int w1_id; + +struct hdq_data { + struct device *dev; + void __iomem *hdq_base; + /* lock status update */ + struct mutex hdq_mutex; + int hdq_usecount; + struct clk *hdq_ick; + struct clk *hdq_fck; + u8 hdq_irqstatus; + /* device lock */ + spinlock_t hdq_spinlock; + /* + * Used to control the call to omap_hdq_get and omap_hdq_put. + * HDQ Protocol: Write the CMD|REG_address first, followed by + * the data wrire or read. + */ + int init_trans; +}; + +static int __init omap_hdq_probe(struct platform_device *pdev); +static int omap_hdq_remove(struct platform_device *pdev); + +static struct platform_driver omap_hdq_driver = { + .probe = omap_hdq_probe, + .remove = omap_hdq_remove, + .driver = { + .name = "omap_hdq", + }, +}; + +static u8 omap_w1_read_byte(void *_hdq); +static void omap_w1_write_byte(void *_hdq, u8 byte); +static u8 omap_w1_reset_bus(void *_hdq); +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found); + + +static struct w1_bus_master omap_w1_master = { + .read_byte = omap_w1_read_byte, + .write_byte = omap_w1_write_byte, + .reset_bus = omap_w1_reset_bus, + .search = omap_w1_search_bus, +}; + +/* HDQ register I/O routines */ +static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) +{ + return __raw_readb(hdq_data->hdq_base + offset); +} + +static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) +{ + __raw_writeb(val, hdq_data->hdq_base + offset); +} + +static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, + u8 val, u8 mask) +{ + u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask) + | (val & mask); + __raw_writeb(new_val, hdq_data->hdq_base + offset); + + return new_val; +} + +/* + * Wait for one or more bits in flag change. + * HDQ_FLAG_SET: wait until any bit in the flag is set. + * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. + * return 0 on success and -ETIMEDOUT in the case of timeout. + */ +static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, + u8 flag, u8 flag_set, u8 *status) +{ + int ret = 0; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + if (flag_set == OMAP_HDQ_FLAG_CLEAR) { + /* wait for the flag clear */ + while (((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (*status & flag) + ret = -ETIMEDOUT; + } else if (flag_set == OMAP_HDQ_FLAG_SET) { + /* wait for the flag set */ + while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (!(*status & flag)) + ret = -ETIMEDOUT; + } else + return -EINVAL; + + return ret; +} + +/* write out a byte and fill *status with HDQ_INT_STATUS */ +static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) +{ + int ret; + u8 tmp_status; + unsigned long irqflags; + + *status = 0; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); + + /* set the GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* wait for the TXCOMPLETE bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX wait elapsed\n"); + goto out; + } + + *status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "TXCOMPLETE/RXCOMPLETE, %x", *status); + ret = -ETIMEDOUT; + goto out; + } + + /* wait for the GO bit return to zero */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_FLAG_CLEAR, &tmp_status); + if (ret) { + dev_dbg(hdq_data->dev, "timeout waiting GO bit" + "return to zero, %x", tmp_status); + } + +out: + return ret; +} + +/* HDQ Interrupt service routine */ +static irqreturn_t hdq_isr(int irq, void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + unsigned long irqflags; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); + + if (hdq_data->hdq_irqstatus & + (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE + | OMAP_HDQ_INT_STATUS_TIMEOUT)) { + /* wake up sleeping process */ + wake_up(&hdq_wait_queue); + } + + return IRQ_HANDLED; +} + +/* HDQ Mode: always return success */ +static u8 omap_w1_reset_bus(void *_hdq) +{ + return 0; +} + +/* W1 search callback function */ +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found) +{ + u64 module_id, rn_le, cs, id; + + if (w1_id) + module_id = w1_id; + else + module_id = 0x1; + + rn_le = cpu_to_le64(module_id); + /* + * HDQ might not obey truly the 1-wire spec. + * So calculate CRC based on module parameter. + */ + cs = w1_calc_crc8((u8 *)&rn_le, 7); + id = (cs << 56) | module_id; + + slave_found(_hdq, id); +} + +static int _omap_hdq_reset(struct hdq_data *hdq_data) +{ + int ret; + u8 tmp_status; + + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); + /* + * Select HDQ mode & enable clocks. + * It is observed that INT flags can't be cleared via a read and GO/INIT + * won't return to zero if interrupt is disabled. So we always enable + * interrupt. + */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + + /* wait for reset to complete */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, + OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", + tmp_status); + else { + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + } + + return ret; +} + +/* Issue break pulse to the device */ +static int omap_hdq_break(struct hdq_data *hdq_data) +{ + int ret = 0; + u8 tmp_status; + unsigned long irqflags; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + ret = -EINTR; + goto rtn; + } + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + /* set the INIT and GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO); + + /* wait for the TIMEOUT bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "break wait elapsed\n"); + ret = -EINTR; + goto out; + } + + tmp_status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { + dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", + tmp_status); + ret = -ETIMEDOUT; + goto out; + } + /* + * wait for both INIT and GO bits rerurn to zero. + * zero wait time expected for interrupt mode. + */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, + &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" + "return to zero, %x", tmp_status); + +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) +{ + int ret = 0; + u8 status; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (!hdq_data->hdq_usecount) { + ret = -EINVAL; + goto out; + } + + if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* + * The RX comes immediately after TX. It + * triggers another interrupt before we + * sleep. So we have to wait for RXCOMPLETE bit. + */ + while (!(hdq_data->hdq_irqstatus + & OMAP_HDQ_INT_STATUS_RXCOMPLETE) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, + OMAP_HDQ_CTRL_STATUS_DIR); + status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "RXCOMPLETE, %x", status); + ret = -ETIMEDOUT; + goto out; + } + } + /* the data is ready. Read it in! */ + *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return 0; + +} + +/* Enable clocks and set the controller to HDQ mode */ +static int omap_hdq_get(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); + ret = -EINVAL; + goto out; + } else { + hdq_data->hdq_usecount++; + try_module_get(THIS_MODULE); + if (1 == hdq_data->hdq_usecount) { + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(hdq_data->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto clk_err; + } + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(hdq_data->dev, "Can not enable fck\n"); + clk_disable(hdq_data->hdq_ick); + ret = -ENODEV; + goto clk_err; + } + + /* make sure HDQ is out of reset */ + if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & + OMAP_HDQ_SYSSTATUS_RESETDONE)) { + ret = _omap_hdq_reset(hdq_data); + if (ret) + /* back up the count */ + hdq_data->hdq_usecount--; + } else { + /* select HDQ mode & enable clocks */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + } + } + } + +clk_err: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +/* Disable clocks to the module */ +static int omap_hdq_put(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) + return -EINTR; + + if (0 == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to decrement use count" + "when it is zero"); + ret = -EINVAL; + } else { + hdq_data->hdq_usecount--; + module_put(THIS_MODULE); + if (0 == hdq_data->hdq_usecount) { + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + } + } + mutex_unlock(&hdq_data->hdq_mutex); + + return ret; +} + +/* Read a byte of data from the device */ +static u8 omap_w1_read_byte(void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + u8 val = 0; + int ret; + + ret = hdq_read_byte(hdq_data, &val); + if (ret) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + return -1; + } + + /* Write followed by a read, release the module */ + if (hdq_data->init_trans) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + } + + return val; +} + +/* Write a byte of data to the device */ +static void omap_w1_write_byte(void *_hdq, u8 byte) +{ + struct hdq_data *hdq_data = _hdq; + int ret; + u8 status; + + /* First write to initialize the transfer */ + if (hdq_data->init_trans == 0) + omap_hdq_get(hdq_data); + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans++; + mutex_unlock(&hdq_data->hdq_mutex); + + ret = hdq_write_byte(hdq_data, byte, &status); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); + return; + } + + /* Second write, data transfered. Release the module */ + if (hdq_data->init_trans > 1) { + omap_hdq_put(hdq_data); + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + } + + return; +} + +static int __init omap_hdq_probe(struct platform_device *pdev) +{ + struct hdq_data *hdq_data; + struct resource *res; + int ret, irq; + u8 rev; + + hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL); + if (!hdq_data) { + dev_dbg(&pdev->dev, "unable to allocate memory\n"); + ret = -ENOMEM; + goto err_kmalloc; + } + + hdq_data->dev = &pdev->dev; + platform_set_drvdata(pdev, hdq_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "unable to get resource\n"); + ret = -ENXIO; + goto err_resource; + } + + hdq_data->hdq_base = ioremap(res->start, SZ_4K); + if (!hdq_data->hdq_base) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + ret = -EINVAL; + goto err_ioremap; + } + + /* get interface & functional clock objects */ + hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + + if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); + if (IS_ERR(hdq_data->hdq_ick)) { + ret = PTR_ERR(hdq_data->hdq_ick); + goto err_clk; + } + if (IS_ERR(hdq_data->hdq_fck)) { + ret = PTR_ERR(hdq_data->hdq_fck); + clk_put(hdq_data->hdq_ick); + goto err_clk; + } + } + + hdq_data->hdq_usecount = 0; + mutex_init(&hdq_data->hdq_mutex); + + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(&pdev->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto err_intfclk; + } + + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can not enable fck\n"); + ret = -ENODEV; + goto err_fnclk; + } + + rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); + dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", + (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); + + spin_lock_init(&hdq_data->hdq_spinlock); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto err_irq; + } + + ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data); + if (ret < 0) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_irq; + } + + omap_hdq_break(hdq_data); + + /* don't clock the HDQ until it is needed */ + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + + omap_w1_master.data = hdq_data; + + ret = w1_add_master_device(&omap_w1_master); + if (ret) { + dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); + goto err_w1; + } + + return 0; + +err_w1: +err_irq: + clk_disable(hdq_data->hdq_fck); + +err_fnclk: + clk_disable(hdq_data->hdq_ick); + +err_intfclk: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + +err_clk: + iounmap(hdq_data->hdq_base); + +err_ioremap: +err_resource: + platform_set_drvdata(pdev, NULL); + kfree(hdq_data); + +err_kmalloc: + return ret; + +} + +static int omap_hdq_remove(struct platform_device *pdev) +{ + struct hdq_data *hdq_data = platform_get_drvdata(pdev); + + mutex_lock(&hdq_data->hdq_mutex); + + if (hdq_data->hdq_usecount) { + dev_dbg(&pdev->dev, "removed when use count is not zero\n"); + return -EBUSY; + } + + mutex_unlock(&hdq_data->hdq_mutex); + + /* remove module dependency */ + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + free_irq(INT_24XX_HDQ_IRQ, hdq_data); + platform_set_drvdata(pdev, NULL); + iounmap(hdq_data->hdq_base); + kfree(hdq_data); + + return 0; +} + +static int __init +omap_hdq_init(void) +{ + return platform_driver_register(&omap_hdq_driver); +} +module_init(omap_hdq_init); + +static void __exit +omap_hdq_exit(void) +{ + platform_driver_unregister(&omap_hdq_driver); +} +module_exit(omap_hdq_exit); + +module_param(w1_id, int, S_IRUSR); +MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("HDQ driver Library"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From cfbc619033d3a2eee8f7aa9314e21b96cf34d399 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:11 -0800 Subject: hdq: bQ27000 HDQ Slave Interface Driver Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 3df29a1..8d0b1fb 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -44,4 +44,11 @@ config W1_SLAVE_DS2760 If you are unsure, say N. +config W1_SLAVE_BQ27000 + tristate "BQ27000 slave support" + depends on W1 + help + Say Y here if you want to use a hdq + bq27000 slave support. + endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index a8eb752..990f400 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o - +obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c new file mode 100644 index 0000000..8f4c91f --- /dev/null +++ b/drivers/w1/slaves/w1_bq27000.c @@ -0,0 +1,123 @@ +/* + * drivers/w1/slaves/w1_bq27000.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +#define HDQ_CMD_READ (0) +#define HDQ_CMD_WRITE (1<<7) + +static int F_ID; + +void w1_bq27000_write(struct device *dev, u8 buf, u8 reg) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) { + pr_info("Could not obtain slave dev ptr\n"); + return; + } + + w1_write_8(sl->master, HDQ_CMD_WRITE | reg); + w1_write_8(sl->master, buf); +} +EXPORT_SYMBOL(w1_bq27000_write); + +int w1_bq27000_read(struct device *dev, u8 reg) +{ + u8 val; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) + return 0; + + w1_write_8(sl->master, HDQ_CMD_READ | reg); + val = w1_read_8(sl->master); + + return val; +} +EXPORT_SYMBOL(w1_bq27000_read); + +static int w1_bq27000_add_slave(struct w1_slave *sl) +{ + int ret; + int id = 1; + struct platform_device *pdev; + + pdev = platform_device_alloc("bq27000-battery", id); + if (!pdev) { + ret = -ENOMEM; + return ret; + } + pdev->dev.parent = &sl->dev; + + ret = platform_device_add(pdev); + if (ret) + goto pdev_add_failed; + + dev_set_drvdata(&sl->dev, pdev); + + goto success; + +pdev_add_failed: + platform_device_unregister(pdev); +success: + return ret; +} + +static void w1_bq27000_remove_slave(struct w1_slave *sl) +{ + struct platform_device *pdev = dev_get_drvdata(&sl->dev); + + platform_device_unregister(pdev); +} + +static struct w1_family_ops w1_bq27000_fops = { + .add_slave = w1_bq27000_add_slave, + .remove_slave = w1_bq27000_remove_slave, +}; + +static struct w1_family w1_bq27000_family = { + .fid = 1, + .fops = &w1_bq27000_fops, +}; + +static int __init w1_bq27000_init(void) +{ + if (F_ID) + w1_bq27000_family.fid = F_ID; + + return w1_register_family(&w1_bq27000_family); +} + +static void __exit w1_bq27000_exit(void) +{ + w1_unregister_family(&w1_bq27000_family); +} + + +module_init(w1_bq27000_init); +module_exit(w1_bq27000_exit); + +module_param(F_ID, int, S_IRUSR); +MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Ltd"); +MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); -- cgit v0.10.2 From e0a29382c6f51c278a7e9a788917ff9182f3dba6 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: hdq: documentation for OMAP HDQ Add a brief document about omap2430/3430 HDQ/1-wire driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq new file mode 100644 index 0000000..ca722e0 --- /dev/null +++ b/Documentation/w1/masters/omap-hdq @@ -0,0 +1,46 @@ +Kernel driver for omap HDQ/1-wire module. +======================================== + +Supported chips: +================ + HDQ/1-wire controller on the TI OMAP 2430/3430 platforms. + +A useful link about HDQ basics: +=============================== +http://focus.ti.com/lit/an/slua408/slua408.pdf + +Description: +============ +The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware +protocol of the master functions of the Benchmark HDQ and the Dallas +Semiconductor 1-Wire protocols. These protocols use a single wire for +communication between the master (HDQ/1-Wire controller) and the slave +(HDQ/1-Wire external compliant device). + +A typical application of the HDQ/1-Wire module is the communication with battery +monitor (gas gauge) integrated circuits. + +The controller supports operation in both HDQ and 1-wire mode. The essential +difference between the HDQ and 1-wire mode is how the slave device responds to +initialization pulse.In HDQ mode, the firmware does not require the host to +create an initialization pulse to the slave.However, the slave can be reset by +using an initialization pulse (also referred to as a break pulse).The slave +does not respond with a presence pulse as it does in the 1-Wire protocol. + +Remarks: +======== +The driver (drivers/w1/masters/omap_hdq.c) supports the HDQ mode of the +controller. In this mode, as we can not read the ID which obeys the W1 +spec(family:id:crc), a module parameter can be passed to the driver which will +be used to calculate the CRC and pass back an appropriate slave ID to the W1 +core. + +By default the master driver and the BQ slave i/f +driver(drivers/w1/slaves/w1_bq27000.c) sets the ID to 1. +Please note to load both the modules with a different ID if required, but note +that the ID used should be same for both master and slave driver loading. + +e.g: +insmod omap_hdq.ko W1_ID=2 +inamod w1_bq27000.ko F_ID=2 + -- cgit v0.10.2 From 4e17e1db96474af5620e3259754df4cb1c46521c Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: Add c2 port support C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/ABI/testing/sysfs-c2port b/Documentation/ABI/testing/sysfs-c2port new file mode 100644 index 0000000..716cffc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-c2port @@ -0,0 +1,88 @@ +What: /sys/class/c2port/ +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/ directory will contain files and + directories that will provide a unified interface to + the C2 port interface. + +What: /sys/class/c2port/c2portX +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/ directory is related to X-th + C2 port into the system. Each directory will contain files to + manage and control its C2 port. + +What: /sys/class/c2port/c2portX/access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/access file enable the access + to the C2 port from the system. No commands can be sent + till this entry is set to 0. + +What: /sys/class/c2port/c2portX/dev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/dev_id file show the device ID + of the connected micro. + +What: /sys/class/c2port/c2portX/flash_access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_access file enable the + access to the on-board flash of the connected micro. + No commands can be sent till this entry is set to 0. + +What: /sys/class/c2port/c2portX/flash_block_size +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_block_size file show + the on-board flash block size of the connected micro. + +What: /sys/class/c2port/c2portX/flash_blocks_num +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_blocks_num file show + the on-board flash blocks number of the connected micro. + +What: /sys/class/c2port/c2portX/flash_data +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_data file export + the content of the on-board flash of the connected micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file execute + the "erase" command on the on-board flash of the connected + micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file show the + on-board flash size of the connected micro. + +What: /sys/class/c2port/c2portX/reset +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/reset file execute a "reset" + command on the connected micro. + +What: /sys/class/c2port/c2portX/rev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/rev_id file show the revision ID + of the connected micro. diff --git a/Documentation/c2port.txt b/Documentation/c2port.txt new file mode 100644 index 0000000..d9bf93e --- /dev/null +++ b/Documentation/c2port.txt @@ -0,0 +1,90 @@ + C2 port support + --------------- + +(C) Copyright 2007 Rodolfo Giometti + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + + + +Overview +-------- + +This driver implements the support for Linux of Silicon Labs (Silabs) +C2 Interface used for in-system programming of micro controllers. + +By using this driver you can reprogram the in-system flash without EC2 +or EC3 debug adapter. This solution is also useful in those systems +where the micro controller is connected via special GPIOs pins. + +References +---------- + +The C2 Interface main references are at (http://www.silabs.com) +Silicon Laboratories site], see: + +- AN127: FLASH Programming via the C2 Interface at +http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and + +- C2 Specification at +http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf, + +however it implements a two wire serial communication protocol (bit +banging) designed to enable in-system programming, debugging, and +boundary-scan testing on low pin-count Silicon Labs devices. Currently +this code supports only flash programming but extensions are easy to +add. + +Using the driver +---------------- + +Once the driver is loaded you can use sysfs support to get C2port's +info or read/write in-system flash. + +# ls /sys/class/c2port/c2port0/ +access flash_block_size flash_erase rev_id +dev_id flash_blocks_num flash_size subsystem/ +flash_access flash_data reset uevent + +Initially the C2port access is disabled since you hardware may have +such lines multiplexed with other devices so, to get access to the +C2port, you need the command: + +# echo 1 > /sys/class/c2port/c2port0/access + +after that you should read the device ID and revision ID of the +connected micro controller: + +# cat /sys/class/c2port/c2port0/dev_id +8 +# cat /sys/class/c2port/c2port0/rev_id +1 + +However, for security reasons, the in-system flash access in not +enabled yet, to do so you need the command: + +# echo 1 > /sys/class/c2port/c2port0/flash_access + +After that you can read the whole flash: + +# cat /sys/class/c2port/c2port0/flash_data > image + +erase it: + +# echo 1 > /sys/class/c2port/c2port0/flash_erase + +and write it: + +# cat image > /sys/class/c2port/c2port0/flash_data + +after writing you have to reset the device to execute the new code: + +# echo 1 > /sys/class/c2port/c2port0/reset diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index dcac7ca..fee7304 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -498,4 +498,6 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +source "drivers/misc/c2port/Kconfig" + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index bb14633..817f7f5 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o +obj-$(CONFIG_C2PORT) += c2port/ diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig new file mode 100644 index 0000000..f1bad2b --- /dev/null +++ b/drivers/misc/c2port/Kconfig @@ -0,0 +1,24 @@ +# +# C2 port devices +# + +menuconfig C2PORT + tristate "Silicon Labs C2 port support (EXPERIMENTAL)" + depends on EXPERIMENTAL + default no + help + This option enables support for Silicon Labs C2 port used to + program Silicon micro controller chips (and other 8051 compatible). + + If your board have no such micro controllers you don't need this + interface at all. + + To compile this driver as a module, choose M here: the module will + be called c2port_core. Note that you also need a client module + usually called c2port-*. + + If you are not sure, say N here. + +if C2PORT + +endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile new file mode 100644 index 0000000..3c610a2 --- /dev/null +++ b/drivers/misc/c2port/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_C2PORT) += core.o diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c new file mode 100644 index 0000000..976b35d --- /dev/null +++ b/drivers/misc/c2port/core.c @@ -0,0 +1,1002 @@ +/* + * Silicon Labs C2 port core Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "c2port" +#define DRIVER_VERSION "0.51.0" + +static DEFINE_SPINLOCK(c2port_idr_lock); +static DEFINE_IDR(c2port_idr); + +/* + * Local variables + */ + +static struct class *c2port_class; + +/* + * C2 registers & commands defines + */ + +/* C2 registers */ +#define C2PORT_DEVICEID 0x00 +#define C2PORT_REVID 0x01 +#define C2PORT_FPCTL 0x02 +#define C2PORT_FPDAT 0xB4 + +/* C2 interface commands */ +#define C2PORT_GET_VERSION 0x01 +#define C2PORT_DEVICE_ERASE 0x03 +#define C2PORT_BLOCK_READ 0x06 +#define C2PORT_BLOCK_WRITE 0x07 +#define C2PORT_PAGE_ERASE 0x08 + +/* C2 status return codes */ +#define C2PORT_INVALID_COMMAND 0x00 +#define C2PORT_COMMAND_FAILED 0x02 +#define C2PORT_COMMAND_OK 0x0d + +/* + * C2 port low level signal managements + */ + +static void c2port_reset(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* To reset the device we have to keep clock line low for at least + * 20us. + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(25); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +static void c2port_strobe_ck(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* During hi-low-hi transition we disable local IRQs to avoid + * interructions since C2 port specification says that it must be + * shorter than 5us, otherwise the microcontroller may consider + * it as a reset signal! + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(1); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +/* + * C2 port basic functions + */ + +static void c2port_write_ar(struct c2port_device *dev, u8 addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (11b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, addr & 0x01); + c2port_strobe_ck(dev); + + addr >>= 1; + } + + /* STOP field */ + ops->c2d_dir(dev, 1); + c2port_strobe_ck(dev); +} + +static int c2port_read_ar(struct c2port_device *dev, u8 *addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (10b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + ops->c2d_dir(dev, 1); + *addr = 0; + for (i = 0; i < 8; i++) { + *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *addr |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_write_dr(struct c2port_device *dev, u8 data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (01b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* DATA field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, data & 0x01); + c2port_strobe_ck(dev); + + data >>= 1; + } + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_read_dr(struct c2port_device *dev, u8 *data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (00b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* DATA field */ + *data = 0; + for (i = 0; i < 8; i++) { + *data >>= 1; /* shift in 8-bit DATA field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *data |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_poll_in_busy(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 20; + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (!(addr & 0x02)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +static int c2port_poll_out_ready(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 10000; /* erase flash needs long time... */ + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (addr & 0x01) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +/* + * sysfs methods + */ + +static ssize_t c2port_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", c2dev->name); +} + +static ssize_t c2port_show_flash_blocks_num(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num); +} + +static ssize_t c2port_show_flash_block_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->block_size); +} + +static ssize_t c2port_show_flash_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size); +} + +static ssize_t c2port_show_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->access); +} + +static ssize_t c2port_store_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + int status, ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + + c2dev->access = !!status; + + /* If access is "on" clock should be HIGH _before_ setting the line + * as output and data line should be set as INPUT anyway */ + if (c2dev->access) + ops->c2ck_set(c2dev, 1); + ops->access(c2dev, c2dev->access); + if (c2dev->access) + ops->c2d_dir(c2dev, 1); + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t c2port_store_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + + c2port_reset(c2dev); + c2dev->flash_access = 0; + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select DEVICEID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_DEVICEID); + + /* Read and return the device ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_dev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select REVID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_REVID); + + /* Read and return the revision ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_rev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_rev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t c2port_show_flash_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->flash_access); +} + +static ssize_t __c2port_store_flash_access(struct c2port_device *dev, + int status) +{ + int ret; + + /* Check the device access status */ + if (!dev->access) + return -EBUSY; + + dev->flash_access = !!status; + + /* If flash_access is off we have nothing to do... */ + if (dev->flash_access == 0) + return 0; + + /* Target the C2 flash programming control register for C2 data + * register access */ + c2port_write_ar(dev, C2PORT_FPCTL); + + /* Write the first keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x02); + if (ret < 0) + return ret; + + /* Write the second keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x01); + if (ret < 0) + return ret; + + /* Delay for at least 20ms to ensure the target is ready for + * C2 flash programming */ + mdelay(25); + + return 0; +} + +static ssize_t c2port_store_flash_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int status; + ssize_t ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + ret = __c2port_store_flash_access(c2dev, status); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot enable %s flash programming\n", + c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_write_flash_erase(struct c2port_device *dev) +{ + u8 status; + int ret; + + /* Target the C2 flash programming data register for C2 data register + * access. + */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send device erase command */ + c2port_write_dr(dev, C2PORT_DEVICE_ERASE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send a three-byte arming sequence to enable the device erase. + * If the sequence is not received correctly, the command will be + * ignored. + * Sequence is: 0xde, 0xad, 0xa5. + */ + c2port_write_dr(dev, 0xde); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xad); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xa5); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t c2port_store_flash_erase(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_erase(c2dev); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_read_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nread = 128; + int i, ret; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return 0; + + if (ops->block_size * ops->blocks_num - offset < nread) + nread = ops->block_size * ops->blocks_num - offset; + if (count < nread) + nread = count; + if (nread == 0) + return nread; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block read command */ + c2port_write_dr(dev, C2PORT_BLOCK_READ); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nread); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before reading FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Read flash block */ + for (i = 0; i < nread; i++) { + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + ret = c2port_read_dr(dev, buffer+i); + if (ret < 0) + return ret; + } + + return nread; +} + +static ssize_t c2port_read_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + ssize_t ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_read_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_write_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nwrite = 128; + int i, ret; + + if (nwrite > count) + nwrite = count; + if (ops->block_size * ops->blocks_num - offset < nwrite) + nwrite = ops->block_size * ops->blocks_num - offset; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return -EINVAL; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block write command */ + c2port_write_dr(dev, C2PORT_BLOCK_WRITE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nwrite); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before writing FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Write flash block */ + for (i = 0; i < nwrite; i++) { + ret = c2port_write_dr(dev, *(buffer+i)); + if (ret < 0) + return ret; + + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + } + + /* Wait for last flash write to complete */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return nwrite; +} + +static ssize_t c2port_write_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + int ret; + + /* Check the device access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name); + + return ret; +} + +/* + * Class attributes + */ + +static struct device_attribute c2port_attrs[] = { + __ATTR(name, 0444, c2port_show_name, NULL), + __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL), + __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL), + __ATTR(flash_size, 0444, c2port_show_flash_size, NULL), + __ATTR(access, 0644, c2port_show_access, c2port_store_access), + __ATTR(reset, 0200, NULL, c2port_store_reset), + __ATTR(dev_id, 0444, c2port_show_dev_id, NULL), + __ATTR(rev_id, 0444, c2port_show_rev_id, NULL), + + __ATTR(flash_access, 0644, c2port_show_flash_access, + c2port_store_flash_access), + __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase), + __ATTR_NULL, +}; + +static struct bin_attribute c2port_bin_attrs = { + .attr = { + .name = "flash_data", + .mode = 0644 + }, + .read = c2port_read_flash_data, + .write = c2port_write_flash_data, + /* .size is computed at run-time */ +}; + +/* + * Exported functions + */ + +struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata) +{ + struct c2port_device *c2dev; + int id, ret; + + if (unlikely(!ops) || unlikely(!ops->access) || \ + unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \ + unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set)) + return ERR_PTR(-EINVAL); + + c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + if (unlikely(!c2dev)) + return ERR_PTR(-ENOMEM); + + ret = idr_pre_get(&c2port_idr, GFP_KERNEL); + if (!ret) { + ret = -ENOMEM; + goto error_idr_get_new; + } + + spin_lock_irq(&c2port_idr_lock); + ret = idr_get_new(&c2port_idr, c2dev, &id); + spin_unlock_irq(&c2port_idr_lock); + + if (ret < 0) + goto error_idr_get_new; + c2dev->id = id; + + c2dev->dev = device_create(c2port_class, NULL, 0, c2dev, + "c2port%d", id); + if (unlikely(!c2dev->dev)) { + ret = -ENOMEM; + goto error_device_create; + } + dev_set_drvdata(c2dev->dev, c2dev); + + strncpy(c2dev->name, name, C2PORT_NAME_LEN); + c2dev->ops = ops; + mutex_init(&c2dev->mutex); + + /* Create binary file */ + c2port_bin_attrs.size = ops->blocks_num * ops->block_size; + ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs); + if (unlikely(ret)) + goto error_device_create_bin_file; + + /* By default C2 port access is off */ + c2dev->access = c2dev->flash_access = 0; + ops->access(c2dev, 0); + + dev_info(c2dev->dev, "C2 port %s added\n", name); + dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes " + "(%d bytes total)\n", + name, ops->blocks_num, ops->block_size, + ops->blocks_num * ops->block_size); + + return c2dev; + +error_device_create_bin_file: + device_destroy(c2port_class, 0); + +error_device_create: + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, id); + spin_unlock_irq(&c2port_idr_lock); + +error_idr_get_new: + kfree(c2dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(c2port_device_register); + +void c2port_device_unregister(struct c2port_device *c2dev) +{ + if (!c2dev) + return; + + dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); + + device_remove_bin_file(c2dev->dev, &c2port_bin_attrs); + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, c2dev->id); + spin_unlock_irq(&c2port_idr_lock); + + device_destroy(c2port_class, c2dev->id); + + kfree(c2dev); +} +EXPORT_SYMBOL(c2port_device_unregister); + +/* + * Module stuff + */ + +static int __init c2port_init(void) +{ + printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION + " - (C) 2007 Rodolfo Giometti\n"); + + c2port_class = class_create(THIS_MODULE, "c2port"); + if (!c2port_class) { + printk(KERN_ERR "c2port: failed to allocate class\n"); + return -ENOMEM; + } + c2port_class->dev_attrs = c2port_attrs; + + return 0; +} + +static void __exit c2port_exit(void) +{ + class_destroy(c2port_class); +} + +module_init(c2port_init); +module_exit(c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/include/linux/c2port.h b/include/linux/c2port.h new file mode 100644 index 0000000..7b5a238 --- /dev/null +++ b/include/linux/c2port.h @@ -0,0 +1,65 @@ +/* + * Silicon Labs C2 port Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include + +#define C2PORT_NAME_LEN 32 + +/* + * C2 port basic structs + */ + +/* Main struct */ +struct c2port_ops; +struct c2port_device { + unsigned int access:1; + unsigned int flash_access:1; + + int id; + char name[C2PORT_NAME_LEN]; + struct c2port_ops *ops; + struct mutex mutex; /* prevent races during read/write */ + + struct device *dev; + + void *private_data; +}; + +/* Basic operations */ +struct c2port_ops { + /* Flash layout */ + unsigned short block_size; /* flash block size in bytes */ + unsigned short blocks_num; /* flash blocks number */ + + /* Enable or disable the access to C2 port */ + void (*access)(struct c2port_device *dev, int status); + + /* Set C2D data line as input/output */ + void (*c2d_dir)(struct c2port_device *dev, int dir); + + /* Read/write C2D data line */ + int (*c2d_get)(struct c2port_device *dev); + void (*c2d_set)(struct c2port_device *dev, int status); + + /* Write C2CK clock line */ + void (*c2ck_set)(struct c2port_device *dev, int status); +}; + +/* + * Exported functions + */ + +#define to_class_dev(obj) container_of((obj), struct class_device, kobj) +#define to_c2port_device(obj) container_of((obj), struct c2port_device, class) + +extern struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata); +extern void c2port_device_unregister(struct c2port_device *dev); -- cgit v0.10.2 From 65131cd52b9e7c5814298e05c3b7843f13e78d24 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:14 -0800 Subject: c2port: add c2port support for Eurotech Duramar 2150 Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig index f1bad2b..e46af9a 100644 --- a/drivers/misc/c2port/Kconfig +++ b/drivers/misc/c2port/Kconfig @@ -21,4 +21,15 @@ menuconfig C2PORT if C2PORT +config C2PORT_DURAMAR_2150 + tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" + depends on X86 && C2PORT + default no + help + This option enables C2 support for the Eurotech's Duramar 2150 + on board micro controller. + + To compile this driver as a module, choose M here: the module will + be called c2port-duramar2150. + endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile index 3c610a2..3b2cf43 100644 --- a/drivers/misc/c2port/Makefile +++ b/drivers/misc/c2port/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_C2PORT) += core.o + +obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c new file mode 100644 index 0000000..338dcc1 --- /dev/null +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -0,0 +1,158 @@ +/* + * Silicon Labs C2 port Linux support for Eurotech Duramar 2150 + * + * Copyright (c) 2008 Rodolfo Giometti + * Copyright (c) 2008 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DATA_PORT 0x325 +#define DIR_PORT 0x326 +#define C2D (1 << 0) +#define C2CK (1 << 1) + +static DEFINE_MUTEX(update_lock); + +/* + * C2 port operations + */ + +static void duramar2150_c2port_access(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + /* 0 = input, 1 = output */ + if (status) + outb(v | (C2D | C2CK), DIR_PORT); + else + /* When access is "off" is important that both lines are set + * as inputs or hi-impedence */ + outb(v & ~(C2D | C2CK), DIR_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + if (dir) + outb(v & ~C2D, DIR_PORT); + else + outb(v | C2D, DIR_PORT); + + mutex_unlock(&update_lock); +} + +static int duramar2150_c2port_c2d_get(struct c2port_device *dev) +{ + return inb(DATA_PORT) & C2D; +} + +static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2D, DATA_PORT); + else + outb(v & ~C2D, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2CK, DATA_PORT); + else + outb(v & ~C2CK, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static struct c2port_ops duramar2150_c2port_ops = { + .block_size = 512, /* bytes */ + .blocks_num = 30, /* total flash size: 15360 bytes */ + + .access = duramar2150_c2port_access, + .c2d_dir = duramar2150_c2port_c2d_dir, + .c2d_get = duramar2150_c2port_c2d_get, + .c2d_set = duramar2150_c2port_c2d_set, + .c2ck_set = duramar2150_c2port_c2ck_set, +}; + +static struct c2port_device *duramar2150_c2port_dev; + +/* + * Module stuff + */ + +static int __init duramar2150_c2port_init(void) +{ + struct resource *res; + int ret = 0; + + res = request_region(0x325, 2, "c2port"); + if (!res) + return -EBUSY; + + duramar2150_c2port_dev = c2port_device_register("uc", + &duramar2150_c2port_ops, NULL); + if (!duramar2150_c2port_dev) { + ret = -ENODEV; + goto free_region; + } + + return 0; + +free_region: + release_region(0x325, 2); + return ret; +} + +static void __exit duramar2150_c2port_exit(void) +{ + /* Setup the GPIOs as input by default (access = 0) */ + duramar2150_c2port_access(duramar2150_c2port_dev, 0); + + c2port_device_unregister(duramar2150_c2port_dev); + + release_region(0x325, 2); +} + +module_init(duramar2150_c2port_init); +module_exit(duramar2150_c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From bff4056c8b868a4311d5ebd6cbbf09a2c10f4551 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:28:21 +0900 Subject: i2c: fix i2c-sh_mobile rx underrun Fix receive path underrun in i2c-sh_mobile driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb2..3384a71 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; -- cgit v0.10.2 From bfbedf787c6b77270679429caadb044b2d33c94c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:33:45 +0900 Subject: sh: early printk port type fix Add PORT_SCIF to unbreak the early printk code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 6b7d166..98a29a7 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -75,6 +75,7 @@ static struct console bios_console = { #endif static struct uart_port scif_port = { + .type = PORT_SCIF, .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; -- cgit v0.10.2 From 10840f034e2329150ce0e683e636ea13b268d333 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 15:38:02 +0900 Subject: sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index 1f3cc3d..8837d51 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -17,7 +17,7 @@ */ int valid_phys_addr_range(unsigned long addr, size_t count) { - if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + if (addr < __MEMORY_START) return 0; if (addr + count > __pa(high_memory)) return 0; -- cgit v0.10.2 From 6e093d9dfffc9a02cd54d36904c62f705f09900a Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Wed, 12 Nov 2008 22:59:21 -0800 Subject: ipv6: routing header fixes This patch fixes two bugs: 1. setsockopt() of anything but a Type 2 routing header should return EINVAL instead of EPERM. Noticed by Shan Wei (shanwei@cn.fujitsu.com). 2. setsockopt()/sendmsg() of a Type 2 routing header with invalid length or segments should return EINVAL. These values are statically fixed in RFC 3775, unlike the variable Type 0 was. Signed-off-by: Brian Haley Signed-off-by: David S. Miller diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 410046a..e44deb8 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -661,6 +661,11 @@ int datagram_send_ctl(struct net *net, switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) { + err = -EINVAL; + goto exit_f; + } break; #endif default: diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4e5eac3..2aa294b 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -366,11 +366,16 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, } /* routing header option needs extra check */ + retv = -EINVAL; if (optname == IPV6_RTHDR && opt && opt->srcrt) { struct ipv6_rt_hdr *rthdr = opt->srcrt; switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) + goto sticky_done; + break; #endif default: -- cgit v0.10.2 From 9c0188acf6dd6990bac9cd906cd554a1476c6d12 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 12 Nov 2008 23:23:51 -0800 Subject: net: shy netns_ok check Failure to pass netns_ok check is SILENT, except some MIB counter is incremented somewhere. And adding "netns_ok = 1" (after long head-scratching session) is usually the last step in making some protocol netns-ready... Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index 861978a..cfb38ac 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -209,9 +209,17 @@ static int ip_local_deliver_finish(struct sk_buff *skb) hash = protocol & (MAX_INET_PROTOS - 1); ipprot = rcu_dereference(inet_protos[hash]); - if (ipprot != NULL && (net == &init_net || ipprot->netns_ok)) { + if (ipprot != NULL) { int ret; + if (!net_eq(net, &init_net) && !ipprot->netns_ok) { + if (net_ratelimit()) + printk("%s: proto %d isn't netns-ready\n", + __func__, protocol); + kfree_skb(skb); + goto out; + } + if (!ipprot->no_policy) { if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) { kfree_skb(skb); -- cgit v0.10.2 From 1fa989e80a9a104bf3b81842a5f4c1867d7aa9c4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 11:05:17 +0000 Subject: 9p: restrict RDMA usage Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c4..0663f99 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v0.10.2 From 5acdc1fa2d9614ecd301f3d27f19bfeabe811ade Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 12 Nov 2008 23:48:40 -0800 Subject: sparc: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index 0837bd52e..0a83bd7 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -563,9 +563,9 @@ build_resources: op->dev.parent = parent; op->dev.bus = &of_platform_bus_type; if (!parent) - strcpy(op->dev.bus_id, "root"); + dev_set_name(&op->dev, "root"); else - sprintf(op->dev.bus_id, "%08x", dp->node); + dev_set_name(&op->dev, "%08x", dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", -- cgit v0.10.2 From e64ed0225bd82d4c108c9f78f46070cfade14fac Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Wed, 12 Nov 2008 23:51:54 -0800 Subject: sparc: Fix tty compile warnings. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes tty compile warnings as sugested by Alan Cox: CC drivers/char/n_tty.o drivers/char/n_tty.c: In function ‘normal_pollÂ’: drivers/char/n_tty.c:1555: warning: array subscript is above array bounds drivers/char/n_tty.c:1564: warning: array subscript is above array bounds drivers/char/n_tty.c: In function ‘read_chanÂ’: drivers/char/n_tty.c:1269: warning: array subscript is above array bounds CC drivers/char/tty_ioctl.o drivers/char/tty_ioctl.c: In function ‘set_termiosÂ’: drivers/char/tty_ioctl.c:533: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:537: warning: array subscript is above array bounds drivers/char/tty_ioctl.c: In function ‘tty_mode_ioctlÂ’: drivers/char/tty_ioctl.c:662: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:892: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:896: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:577: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:928: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:934: warning: array subscript is above array bounds Signed-off-by: Robert Reif Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h index d6ca3e2..d72dfed 100644 --- a/arch/sparc/include/asm/termbits.h +++ b/arch/sparc/include/asm/termbits.h @@ -29,10 +29,11 @@ struct termios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ +#ifndef __KERNEL__ cc_t c_cc[NCCS]; /* control characters */ -#ifdef __KERNEL__ +#else + cc_t c_cc[NCCS+2]; /* kernel needs 2 more to hold vmin/vtime */ #define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ #endif }; @@ -42,8 +43,7 @@ struct termios2 { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* padding to match ktermios */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; @@ -54,8 +54,7 @@ struct ktermios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; -- cgit v0.10.2 From 2fe401e38602e853e01376cdb670b0bc4d526a6d Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Wed, 12 Nov 2008 16:23:55 -0800 Subject: sched: correct sched-rt-group.txt pathname in init/Kconfig init/Kconfig directs the user to Documentation/sched-rt-group.txt, but the file is actually in Documentation/scheduler/sched-rt-group.txt. This patch corrects the pathname mentioned in init/Kconfig. Signed-off-by: Adrian Knoth Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/init/Kconfig b/init/Kconfig index 86b00c5..2f850d8 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -354,7 +354,7 @@ config RT_GROUP_SCHED setting below. If enabled, it will also make it impossible to schedule realtime tasks for non-root users until you allocate realtime bandwidth for them. - See Documentation/sched-rt-group.txt for more information. + See Documentation/scheduler/sched-rt-group.txt for more information. choice depends on GROUP_SCHED -- cgit v0.10.2 From 2cd0ebc83d771220eeddec91fd6d4cfefc2cc46e Mon Sep 17 00:00:00 2001 From: Francesco VIRLINZI Date: Wed, 15 Oct 2008 11:58:24 +0200 Subject: sh: Fixed the TMU0 reload value on resume This patch fixes the TMU0 interrupt frequency on suspend/resume. During the resume the kernel reprograms the TMU0.ClockEvent mode but if the mode is periodic than the TMU0.TCOR is updated with a random wrong value without taking care latest valid saved value. There was no problem with No_HZ system where TMU0.TCOR isn't used. Signed-off-by: Francesco M. Virlinzi Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index aaaf90d..3c61ddd 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -120,7 +120,7 @@ static void tmu_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - ctrl_outl(ctrl_inl(TMU0_TCNT), TMU0_TCOR); + ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR); break; case CLOCK_EVT_MODE_ONESHOT: ctrl_outl(0, TMU0_TCOR); -- cgit v0.10.2 From 5d52013cbb3d39bde9f5a6023193058eeb112e98 Mon Sep 17 00:00:00 2001 From: Stuart MENEFY Date: Fri, 10 Oct 2008 19:49:30 +0100 Subject: sh: __copy_user function can corrupt the stack in case of exception The __copy_user function can corrupt the stack in the case of a non-trivial length of data, and either of the first two move instructions cause an exception. This is because the fixup for these two instructions is mapped to the no_pop case, but these instructions execute after the stack is pushed. This change creates an explicit NO_POP exception mapping macro, and uses it for the two instructions executed in the trivial case where no stack pushes occur. More information at ST Linux bugzilla: https://bugzilla.stlinux.com/show_bug.cgi?id=4824 Signed-off-by: Dylan Reid Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S index 5d12e65..43de7e8 100644 --- a/arch/sh/lib/copy_page.S +++ b/arch/sh/lib/copy_page.S @@ -80,6 +80,11 @@ ENTRY(copy_page) .section __ex_table, "a"; \ .long 9999b, 6000f ; \ .previous +#define EX_NO_POP(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6005f ; \ + .previous ENTRY(__copy_user) ! Check if small number of bytes mov #11,r0 @@ -139,9 +144,9 @@ EX( mov.b r1,@r4 ) bt 1f 2: -EX( mov.b @r5+,r0 ) +EX_NO_POP( mov.b @r5+,r0 ) dt r6 -EX( mov.b r0,@r4 ) +EX_NO_POP( mov.b r0,@r4 ) bf/s 2b add #1,r4 @@ -150,7 +155,7 @@ EX( mov.b r0,@r4 ) # Exception handler: .section .fixup, "ax" -6000: +6005: mov.l 8000f,r1 mov r3,r0 jmp @r1 -- cgit v0.10.2 From 272966c070237c8cb540fe67e06df51bc6ea9cc2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 17:46:06 +0900 Subject: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. Under qemu there is a race between the TDxE read-and-clear and the SCxTDR write. While on hardware it can be gauranteed that the read-and-clear will happen prior to the character being written out, no such assumption can be made under emulation. As this path happens with IRQs off and the hardware itself doesn't care about the ordering, move the SCxTDR write until after the read-and-clear. Signed-off-by: Vladimir Prus Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 98a29a7..a952dcf 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -85,9 +85,9 @@ static void scif_sercon_putc(int c) while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) ; - sci_out(&scif_port, SCxTDR, c); sci_in(&scif_port, SCxSR); sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); + sci_out(&scif_port, SCxTDR, c); while ((sci_in(&scif_port, SCxSR) & 0x40) == 0) ; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 518c032..165fc01 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } -- cgit v0.10.2 From 7d672cd7506165818aacf97fdc448cffc72bde37 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 31 Oct 2008 00:07:23 +0100 Subject: HID: fix locking in hidraw_open() As open needs to sleep hidraw was wrong to call it with a spinlock held. Furthermore, open can of course fail which needs to be handled. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 894d52e..7685ae6 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -38,7 +38,7 @@ static int hidraw_major; static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; -static DEFINE_SPINLOCK(minors_lock); +static DEFINE_MUTEX(minors_lock); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file) struct hidraw_list *list; int err = 0; - lock_kernel(); if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) { err = -ENOMEM; goto out; } - spin_lock(&minors_lock); + lock_kernel(); + mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", minor); @@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file) file->private_data = list; dev = hidraw_table[minor]; - if (!dev->open++) - dev->hid->ll_driver->open(dev->hid); + if (!dev->open++) { + err = dev->hid->ll_driver->open(dev->hid); + if (err < 0) + dev->open--; + } out_unlock: - spin_unlock(&minors_lock); -out: + mutex_unlock(&minors_lock); unlock_kernel(); +out: return err; } @@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid) result = -EINVAL; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) { if (hidraw_table[minor]) @@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid) break; } - spin_unlock(&minors_lock); - if (result) { + mutex_unlock(&minors_lock); kfree(dev); goto out; } @@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid) NULL, "%s%d", "hidraw", minor); if (IS_ERR(dev->dev)) { - spin_lock(&minors_lock); hidraw_table[minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); result = PTR_ERR(dev->dev); kfree(dev); goto out; } + mutex_unlock(&minors_lock); init_waitqueue_head(&dev->wait); INIT_LIST_HEAD(&dev->list); @@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid) hidraw->exist = 0; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); hidraw_table[hidraw->minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); -- cgit v0.10.2 From a96d6ef34751093797c3a6c6080733dd7af23d35 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 20:03:45 +0100 Subject: HID: support for new unibody macbooks The unibody MacBook 5 and MacBook Pro 5 come with a new version of the bcm5974 trackpad. This patch adds the USB device ids and all the appropriate quirks, including hid_blacklist. Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index c6ab4ba..ce3c399 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -418,6 +418,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index d3671b4..4f0b92e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1250,6 +1250,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, @@ -1573,6 +1576,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f05bcbb..d70075d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -82,6 +82,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 -- cgit v0.10.2 From 437184ae8bd1ef923a40b009e37801deae66ad55 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 13:31:38 +0100 Subject: HID: map macbook keys for "Expose" and "Dashboard" On macbooks there are specific keys for the user-space functions Expose and Dashboard, which currently has no counterpart in input.h. This patch adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly. Acked-by: Dmitry Torokhov Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index ce3c399..9b97795 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -55,10 +55,11 @@ struct apple_key_translation { static struct apple_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, diff --git a/include/linux/input.h b/include/linux/input.h index b86fb55..5341e82 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -238,6 +238,7 @@ struct input_absinfo { #define KEY_KPEQUAL 117 #define KEY_KPPLUSMINUS 118 #define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ #define KEY_KPCOMMA 121 #define KEY_HANGEUL 122 @@ -322,6 +323,7 @@ struct input_absinfo { #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 -- cgit v0.10.2 From 43ff3a48c13f3ddc085271c2eea2985d28c8aa08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 10 Nov 2008 22:51:50 +0100 Subject: HID: use single threaded work queue for hid_compat Use single threaded work queue for hid_compat I doubt HID really needs to scale over multiple CPUs. So only use a single threaded workqueue for HID_COMPAT. This avoids some excessive thread use on systems with a larger number of CPUs. Signed-off-by: Andi Kleen Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4f0b92e..e158aa8 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1736,7 +1736,7 @@ static int __init hid_init(void) goto err_bus; #ifdef CONFIG_HID_COMPAT - hid_compat_wq = create_workqueue("hid_compat"); + hid_compat_wq = create_singlethread_workqueue("hid_compat"); if (!hid_compat_wq) { hidraw_exit(); goto err; -- cgit v0.10.2 From e3e14de50dff86331b8f0d701e910146c0049bf5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 1 Nov 2008 23:41:46 +0100 Subject: HID: fix start/stop cycle in usbhid driver `stop' left out usbhid->urb* pointers and so the next `start' thought it needs to allocate nothing and used the memory pointers previously pointed to. This led to memory corruption and device malfunction. Also don't forget to clear disconnect flag on start which was left set by the previous `stop'. This fixes echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind failures. Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 18e5ddd..f0339aef 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid) unsigned int n, insize = 0; int ret; + clear_bit(HID_DISCONNECTED, &usbhid->iofl); + usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -888,6 +890,9 @@ fail: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); + usbhid->urbin = NULL; + usbhid->urbout = NULL; + usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); mutex_unlock(&usbhid->setup); return ret; @@ -924,6 +929,9 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbctrl); usb_free_urb(usbhid->urbout); + usbhid->urbin = NULL; /* don't mess up next start */ + usbhid->urbctrl = NULL; + usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); mutex_unlock(&usbhid->setup); -- cgit v0.10.2 From c91c21c5a6facddce936d82e5bc0c655d04288aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 10:36:11 +0100 Subject: HID: fix kworld fm700 radio hidquirks This patch fixes kworld fm700 usb-radio hidqurks that handled by radio-si470x. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c The bug went in through the V4L/DVB tree by commit 6a13378a without HID maintainer being involved at all. Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e158aa8..4b33d14 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1268,7 +1268,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, @@ -1489,6 +1488,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, -- cgit v0.10.2 From 62a56582e01b1c5139b235004548e233201df9aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 05:44:50 +0300 Subject: HID: fix radio-mr800 hidquirks This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4b33d14..147ec59 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1255,7 +1255,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1411,6 +1410,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, -- cgit v0.10.2 From 4d4e9bb339cfcde7811af10859ba1ce2fe3d46b4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 16:45:04 +0100 Subject: ALSA: hda - Add digital beep playback switch for STAC/IDT codecs The digital beep widget may have no mute control, and always enabling the beep is ofen pretty annoying, especially on laptops. This patch adds a mixer control "PC Beep Playback Switch" when there is no mixer amp mute is found, and controls it on software. Reference: Novell bnc#444572 https://bugzilla.novell.com/show_bug.cgi?id=444572 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 9b77b3e..b1796ae 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -37,6 +37,9 @@ static void snd_hda_generate_beep(struct work_struct *work) container_of(work, struct hda_beep, beep_work); struct hda_codec *codec = beep->codec; + if (!beep->enabled) + return; + /* generate tone */ snd_hda_codec_write_cache(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); @@ -115,6 +118,7 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) beep->nid = nid; beep->dev = input_dev; beep->codec = codec; + beep->enabled = 1; codec->beep = beep; INIT_WORK(&beep->beep_work, &snd_hda_generate_beep); diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index de4036e..b9679f0 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -31,6 +31,7 @@ struct hda_beep { char phys[32]; int tone; int nid; + int enabled; struct work_struct beep_work; /* scheduled task for beep event */ }; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4300a67..1633ef2c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2587,8 +2587,10 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = { }; /* add dynamic controls */ -static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, - int idx, const char *name, unsigned long val) +static int stac92xx_add_control_temp(struct sigmatel_spec *spec, + struct snd_kcontrol_new *ktemp, + int idx, const char *name, + unsigned long val) { struct snd_kcontrol_new *knew; @@ -2607,20 +2609,29 @@ static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, } knew = &spec->kctl_alloc[spec->num_kctl_used]; - *knew = stac92xx_control_templates[type]; + *knew = *ktemp; knew->index = idx; knew->name = kstrdup(name, GFP_KERNEL); - if (! knew->name) + if (!knew->name) return -ENOMEM; knew->private_value = val; spec->num_kctl_used++; return 0; } +static inline int stac92xx_add_control_idx(struct sigmatel_spec *spec, + int type, int idx, const char *name, + unsigned long val) +{ + return stac92xx_add_control_temp(spec, + &stac92xx_control_templates[type], + idx, name, val); +} + /* add dynamic controls */ -static int stac92xx_add_control(struct sigmatel_spec *spec, int type, - const char *name, unsigned long val) +static inline int stac92xx_add_control(struct sigmatel_spec *spec, int type, + const char *name, unsigned long val) { return stac92xx_add_control_idx(spec, type, 0, name, val); } @@ -3062,6 +3073,43 @@ static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec, return 0; } +#ifdef CONFIG_SND_HDA_INPUT_BEEP +#define stac92xx_dig_beep_switch_info snd_ctl_boolean_mono_info + +static int stac92xx_dig_beep_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = codec->beep->enabled; + return 0; +} + +static int stac92xx_dig_beep_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + int enabled = !!ucontrol->value.integer.value[0]; + if (codec->beep->enabled != enabled) { + codec->beep->enabled = enabled; + return 1; + } + return 0; +} + +static struct snd_kcontrol_new stac92xx_dig_beep_ctrl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = stac92xx_dig_beep_switch_info, + .get = stac92xx_dig_beep_switch_get, + .put = stac92xx_dig_beep_switch_put, +}; + +static int stac92xx_beep_switch_ctl(struct hda_codec *codec) +{ + return stac92xx_add_control_temp(codec->spec, &stac92xx_dig_beep_ctrl, + 0, "PC Beep Playback Switch", 0); +} +#endif + static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; @@ -3368,6 +3416,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out #ifdef CONFIG_SND_HDA_INPUT_BEEP if (spec->digbeep_nid > 0) { hda_nid_t nid = spec->digbeep_nid; + unsigned int caps; err = stac92xx_auto_create_beep_ctls(codec, nid); if (err < 0) @@ -3375,6 +3424,14 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (codec->beep && + !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } #endif -- cgit v0.10.2 From 6a12afb5640217454cad21e8cf9a74b038fa3717 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 13 Nov 2008 13:08:56 +0100 Subject: ALSA: hda - Missing NULL check in hda_beep.c Added a NULL check of input_allocate_device() in hda_beep.c. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index b1796ae..3ecd7e7 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -88,6 +88,10 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) snprintf(beep->phys, sizeof(beep->phys), "card%d/codec#%d/beep0", codec->bus->card->number, codec->addr); input_dev = input_allocate_device(); + if (!input_dev) { + kfree(beep); + return -ENOMEM; + } /* setup digital beep device */ input_dev->name = "HDA Digital PCBeep"; -- cgit v0.10.2 From ee51a1de7e3837577412be269e0100038068e691 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 13 Nov 2008 14:58:31 +0100 Subject: tracing: fix mmiotrace resizing crash Pekka reported a crash when resizing the mmiotrace tracer (if only mmiotrace is enabled). This happens because in that case we do not allocate the max buffer, but we try to use it. Make ring_buffer_resize() idempotent against NULL buffers. Reported-by: Pekka Paalanen Signed-off-by: Ingo Molnar diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 231db20..036456c 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -538,6 +538,12 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size) LIST_HEAD(pages); int i, cpu; + /* + * Always succeed at resizing a non-existent buffer: + */ + if (!buffer) + return size; + size = DIV_ROUND_UP(size, BUF_PAGE_SIZE); size *= BUF_PAGE_SIZE; buffer_size = buffer->pages * BUF_PAGE_SIZE; -- cgit v0.10.2 From 9fa767928fe738aba8e99dae511e91f02fe20b28 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:33:51 +0000 Subject: [ARM] dma-mapping: fix compiler warning arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 1cb8602..4ed149c 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -256,8 +256,17 @@ int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); #else -#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir) (1) -#define dmabounce_sync_for_device(dev,dma,off,sz,dir) (1) +static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} + +static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} /** -- cgit v0.10.2 From 1e8b0416ca387d754410a4e5d6b92ad6e2fb00eb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:43:03 +0000 Subject: [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: Russell King diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 028b878..e00a262 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -408,27 +408,10 @@ #define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE /* - * Application Flash - * - */ -#define FLASH_BASE INTEGRATOR_FLASH_BASE -#define FLASH_SIZE INTEGRATOR_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE INTEGRATOR_BOOT_ROM_HI -#define EPROM_SIZE INTEGRATOR_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI /* * Timer definitions diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 4034b54..793a3a3 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -239,27 +239,10 @@ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ /* - * Application Flash - * - */ -#define FLASH_BASE REALVIEW_FLASH_BASE -#define FLASH_SIZE REALVIEW_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE REALVIEW_BOOT_ROM_HI -#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE REALVIEW_BOOT_ROM_HI /* * System controller bit assignment diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 27cbe6a..f91ba93 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -436,28 +436,12 @@ #define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1) #define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2) #define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3) -/* - * Application Flash - * - */ -#define FLASH_BASE VERSATILE_FLASH_BASE -#define FLASH_SIZE VERSATILE_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE VERSATILE_BOOT_ROM_HI -#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE VERSATILE_BOOT_ROM_HI /* * System controller bit assignment -- cgit v0.10.2 From d9a682a592ff5905d328c648fd30ee7fa12ce8ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:53:08 +0000 Subject: [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants Signed-off-by: Russell King diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 4c3e101..7cc675c 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -95,10 +95,6 @@ #include /* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - #define SRAM_START 0x60000000 #define SRAM_SIZE 0xc000 #define SRAM_WIDTH 4 diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index c3a33b8..7e247c0 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -275,9 +275,9 @@ static struct map_desc cl7500_io_desc[] __initdata = { .length = ISA_SIZE, .type = MT_DEVICE }, { /* Flash */ - .virtual = FLASH_BASE, - .pfn = __phys_to_pfn(FLASH_START), - .length = FLASH_SIZE, + .virtual = CLPS7500_FLASH_BASE, + .pfn = __phys_to_pfn(CLPS7500_FLASH_START), + .length = CLPS7500_FLASH_SIZE, .type = MT_DEVICE }, { /* LED */ .virtual = LED_BASE, diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h index d66578a..a6ad1d4 100644 --- a/arch/arm/mach-clps7500/include/mach/hardware.h +++ b/arch/arm/mach-clps7500/include/mach/hardware.h @@ -39,9 +39,9 @@ #define ISA_SIZE 0x00010000 #define ISA_BASE 0xe1000000 -#define FLASH_START 0x01000000 /* XXX */ -#define FLASH_SIZE 0x01000000 -#define FLASH_BASE 0xe2000000 +#define CLPS7500_FLASH_START 0x01000000 /* XXX */ +#define CLPS7500_FLASH_SIZE 0x01000000 +#define CLPS7500_FLASH_BASE 0xe2000000 #define LED_START 0x0302B000 #define LED_SIZE 0x00001000 diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h index 079b279..38b8e0d 100644 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ b/arch/arm/mach-h720x/include/mach/boards.h @@ -19,9 +19,9 @@ #ifdef CONFIG_ARCH_H7202 /* FLASH */ -#define FLASH_VIRT 0xd0000000 -#define FLASH_PHYS 0x00000000 -#define FLASH_SIZE 0x02000000 +#define H720X_FLASH_VIRT 0xd0000000 +#define H720X_FLASH_PHYS 0x00000000 +#define H720X_FLASH_SIZE 0x02000000 /* onboard LAN controller */ # define ETH0_PHYS 0x08000000 diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index e5059aa..d7bc429 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -15,7 +15,9 @@ #include - +#define FLASH_START 0x00000000 +#define FLASH_SIZE 0x800000 +#define FLASH_WIDTH 4 static struct mtd_info *flash_mtd; diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 35fef65..3b959fa 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -24,8 +24,8 @@ static struct mtd_info *mymtd; static struct map_info h720x_map = { .name = "H720X", .bankwidth = 4, - .size = FLASH_SIZE, - .phys = FLASH_PHYS, + .size = H720X_FLASH_SIZE, + .phys = H720X_FLASH_PHYS, }; static struct mtd_partition h720x_partitions[] = { @@ -70,7 +70,7 @@ int __init h720x_mtd_init(void) char *part_type = NULL; - h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE); + h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); if (!h720x_map.virt) { printk(KERN_ERR "H720x-MTD: ioremap failed\n"); -- cgit v0.10.2 From 8959dabdf2f8f9ce982a2c4cfe6d1652a2fb6320 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 15:02:41 +0000 Subject: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants Signed-off-by: Russell King diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 7cc675c..b3ebe9e 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -94,16 +94,6 @@ #include #include -/* dynamic ioremap() areas */ -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - /* static cdb89712_map_io() areas */ #define REGISTER_START 0x80000000 #define REGISTER_SIZE 0x4000 @@ -194,14 +184,6 @@ #define CEIVA_FLASH_SIZE 0x100000 #define CEIVA_FLASH_WIDTH 2 -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - /* * SED1355 LCD controller */ diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index d7bc429..8d92d8d 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -14,11 +14,20 @@ #include #include - +/* dynamic ioremap() areas */ #define FLASH_START 0x00000000 #define FLASH_SIZE 0x800000 #define FLASH_WIDTH 4 +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0xc000 +#define SRAM_WIDTH 4 + +#define BOOTROM_START 0x70000000 +#define BOOTROM_SIZE 0x80 +#define BOOTROM_WIDTH 4 + + static struct mtd_info *flash_mtd; struct map_info cdb89712_flash_map = { -- cgit v0.10.2 From 02f5621042e3f7e2fb6c741cbe5ee7c1f3caf354 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Wed, 5 Nov 2008 22:18:19 +0000 Subject: Kconfig: SLUB is the default slab allocator In 2007, a0acd820807680d2ccc4ef3448387fcdbf152c73 changed the default slab allocator to SLUB, but the SLAB help text still says SLAB is the default. This change fixes that. Signed-off-by: Simon Arlott Signed-off-by: Pekka Enberg diff --git a/init/Kconfig b/init/Kconfig index 86b00c5..226da27 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -771,8 +771,7 @@ config SLAB help The regular slab allocator that is established and known to work well in all environments. It organizes cache hot objects in - per cpu and per node queues. SLAB is the default choice for - a slab allocator. + per cpu and per node queues. config SLUB bool "SLUB (Unqueued Allocator)" @@ -781,7 +780,8 @@ config SLUB instead of managing queues of cached objects (SLAB approach). Per cpu caching is realized using slabs of objects instead of queues of objects. SLUB can use memory efficiently - and has enhanced diagnostics. + and has enhanced diagnostics. SLUB is the default choice for + a slab allocator. config SLOB depends on EMBEDDED -- cgit v0.10.2 From d7de4c1dc3a2faca0bf05d9e342f885cb2696766 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Nov 2008 20:40:12 +0200 Subject: slab: document SLAB_DESTROY_BY_RCU Explain this SLAB_DESTROY_BY_RCU thing... [hugh@veritas.com: add a pointer to comment in mm/slab.c] Signed-off-by: Peter Zijlstra Acked-by: Jens Axboe Acked-by: Paul E. McKenney Acked-by: Christoph Lameter Signed-off-by: Hugh Dickins Signed-off-by: Pekka Enberg diff --git a/include/linux/slab.h b/include/linux/slab.h index ba965c8..000da12 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -23,6 +23,34 @@ #define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ #define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ #define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */ +/* + * SLAB_DESTROY_BY_RCU - **WARNING** READ THIS! + * + * This delays freeing the SLAB page by a grace period, it does _NOT_ + * delay object freeing. This means that if you do kmem_cache_free() + * that memory location is free to be reused at any time. Thus it may + * be possible to see another object there in the same RCU grace period. + * + * This feature only ensures the memory location backing the object + * stays valid, the trick to using this is relying on an independent + * object validation pass. Something like: + * + * rcu_read_lock() + * again: + * obj = lockless_lookup(key); + * if (obj) { + * if (!try_get_ref(obj)) // might fail for free objects + * goto again; + * + * if (obj->key != key) { // not the object we expected + * put_ref(obj); + * goto again; + * } + * } + * rcu_read_unlock(); + * + * See also the comment on struct slab_rcu in mm/slab.c. + */ #define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ #define SLAB_TRACE 0x00200000UL /* Trace allocations and frees */ -- cgit v0.10.2 From 278afcbf4fe964230eba67f8fb8235e8b7e63ffb Mon Sep 17 00:00:00 2001 From: David Teigland Date: Thu, 13 Nov 2008 13:22:34 -0600 Subject: dlm: fix shutdown cleanup Fixes a regression from commit 0f8e0d9a317406612700426fad3efab0b7bbc467, "dlm: allow multiple lockspace creates". An extraneous 'else' slipped into a code fragment being moved from release_lockspace() to dlm_release_lockspace(). The result of the unwanted 'else' is that dlm threads and structures are not stopped and cleaned up when the final dlm lockspace is removed. Trying to create a new lockspace again afterward will fail with "kmem_cache_create: duplicate cache dlm_conn" because the cache was not previously destroyed. Signed-off-by: David Teigland diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index d910501..8d86b79 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -812,7 +812,7 @@ int dlm_release_lockspace(void *lockspace, int force) error = release_lockspace(ls, force); if (!error) ls_count--; - else if (!ls_count) + if (!ls_count) threads_stop(); mutex_unlock(&ls_lock); -- cgit v0.10.2 From 906bf113beb07a76b665c3863aa864acdc8f9950 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 13 Nov 2008 18:55:54 +0100 Subject: fix cpumask build breakage on parisc Commit 2d3854a37e8b767a51aba38ed6d22817b0631e33 ("cpumask: introduce new API, without changing anything") introduced a build breakage on parisc. This trivial patch fixes it. Signed-off-by: Helge Deller Cc: Rusty Russell Cc: Andrew Morton Cc: Kyle Mc Martin Signed-off-by: Linus Torvalds diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h index 398cdba..409e698 100644 --- a/arch/parisc/include/asm/smp.h +++ b/arch/parisc/include/asm/smp.h @@ -44,8 +44,6 @@ extern void arch_send_call_function_ipi(cpumask_t mask); #define PROC_CHANGE_PENALTY 15 /* Schedule penalty */ -extern unsigned long cpu_present_mask; - #define raw_smp_processor_id() (current_thread_info()->cpu) #else /* CONFIG_SMP */ -- cgit v0.10.2 From 3b7952109361c684caf0c50474da8662ecc81019 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 19:45:32 +0000 Subject: [CIFS] Fix cifs reconnection flags In preparation for Jeff's big umount/mount fixes to remove the possibility of various races in cifs mount and linked list handling of sessions, sockets and tree connections, this patch cleans up some repetitive code in cifs_mount, and addresses a problem with ses->status and tcon->tidStatus in which we were overloading the "need_reconnect" state with other status in that field. So the "need_reconnect" flag has been broken out from those two state fields (need reconnect was not mutually exclusive from some of the other possible tid and ses states). In addition, a few exit cases in cifs_mount were cleaned up, and a problem with a tcon flag (for lease support) was not being set consistently for the 2nd mount of the same share CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ac5915d..903bbd6 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1013,7 +1013,7 @@ static int cifs_oplock_thread(void *dummyarg) not bother sending an oplock release if session to server still is disconnected since oplock already released by the server in that case */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { rc = CIFSSMBLock(0, pTcon, netfid, 0 /* len */ , 0 /* offset */, 0, 0, LOCKING_ANDX_OPLOCK_RELEASE, diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 1cb1189..dc0aa14 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -122,6 +122,8 @@ struct cifs_cred { */ struct TCP_Server_Info { + struct list_head tcp_ses_list; + struct list_head smb_ses_list; /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -195,6 +197,7 @@ struct cifsUidInfo { */ struct cifsSesInfo { struct list_head cifsSessionList; + struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ @@ -216,6 +219,7 @@ struct cifsSesInfo { char userName[MAX_USERNAME_SIZE + 1]; char *domainName; char *password; + bool need_reconnect:1; /* connection reset, uid now invalid */ }; /* no more than one of the following three session flags may be set */ #define CIFS_SES_NT4 1 @@ -288,6 +292,7 @@ struct cifsTconInfo { bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol for this mount even if server would support */ bool local_lease:1; /* check leases (only) on local system not remote */ + bool need_reconnect:1; /* connection reset, tid now invalid */ /* BB add field for back pointer to sb struct(s)? */ }; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index d5eac48..7f0651b 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -190,10 +190,10 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -295,7 +295,7 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, check for tcp and smb session status done differently for those three - in the calling routine */ if (tcon) { - if (tcon->tidStatus == CifsExiting) { + if (tcon->need_reconnect) { /* only tree disconnect, open, and write, (and ulogoff which does not have tcon) are allowed as we start force umount */ @@ -337,10 +337,10 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -759,7 +759,7 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) /* No need to return error on this operation if tid invalidated and closed on server already e.g. due to tcp session crashing */ - if (tcon->tidStatus == CifsNeedReconnect) { + if (tcon->need_reconnect) { up(&tcon->tconSem); return 0; } @@ -806,32 +806,36 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) up(&ses->sesSem); return -EBUSY; } + + if (ses->server == NULL) + return -EIO; + + if (ses->need_reconnect) + goto session_already_dead; /* no need to send SMBlogoff if uid + already closed due to reconnect */ rc = small_smb_init(SMB_COM_LOGOFF_ANDX, 2, NULL, (void **)&pSMB); if (rc) { up(&ses->sesSem); return rc; } - if (ses->server) { - pSMB->hdr.Mid = GetNextMid(ses->server); + pSMB->hdr.Mid = GetNextMid(ses->server); - if (ses->server->secMode & + if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; - } pSMB->hdr.Uid = ses->Suid; pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); - if (ses->server) { - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; - } +session_already_dead: + atomic_dec(&ses->server->socketUseCount); + if (atomic_read(&ses->server->socketUseCount) == 0) { + spin_lock(&GlobalMid_Lock); + ses->server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); + rc = -ESHUTDOWN; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c682be8..c1cd121 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -149,7 +149,7 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); if (ses->server) { if (ses->server == server) { - ses->status = CifsNeedReconnect; + ses->need_reconnect = true; ses->ipc_tid = 0; } } @@ -158,7 +158,7 @@ cifs_reconnect(struct TCP_Server_Info *server) list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) - tcon->tidStatus = CifsNeedReconnect; + tcon->need_reconnect = true; } read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ @@ -1891,6 +1891,92 @@ kill_cifsd(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static void setup_cifs_sb(struct smb_vol *pvolume_info, + struct cifs_sb_info *cifs_sb) +{ + if (pvolume_info->rsize > CIFSMaxBufSize) { + cERROR(1, ("rsize %d too large, using MaxBufSize", + pvolume_info->rsize)); + cifs_sb->rsize = CIFSMaxBufSize; + } else if ((pvolume_info->rsize) && + (pvolume_info->rsize <= CIFSMaxBufSize)) + cifs_sb->rsize = pvolume_info->rsize; + else /* default */ + cifs_sb->rsize = CIFSMaxBufSize; + + if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { + cERROR(1, ("wsize %d too large, using 4096 instead", + pvolume_info->wsize)); + cifs_sb->wsize = 4096; + } else if (pvolume_info->wsize) + cifs_sb->wsize = pvolume_info->wsize; + else + cifs_sb->wsize = min_t(const int, + PAGEVEC_SIZE * PAGE_CACHE_SIZE, + 127*1024); + /* old default of CIFSMaxBufSize was too small now + that SMB Write2 can send multiple pages in kvec. + RFC1001 does not describe what happens when frame + bigger than 128K is sent so use that as max in + conjunction with 52K kvec constraint on arch with 4K + page size */ + + if (cifs_sb->rsize < 2048) { + cifs_sb->rsize = 2048; + /* Windows ME may prefer this */ + cFYI(1, ("readsize set to minimum: 2048")); + } + /* calculate prepath */ + cifs_sb->prepath = pvolume_info->prepath; + if (cifs_sb->prepath) { + cifs_sb->prepathlen = strlen(cifs_sb->prepath); + /* we can not convert the / to \ in the path + separators in the prefixpath yet because we do not + know (until reset_cifs_unix_caps is called later) + whether POSIX PATH CAP is available. We normalize + the / to \ after reset_cifs_unix_caps is called */ + pvolume_info->prepath = NULL; + } else + cifs_sb->prepathlen = 0; + cifs_sb->mnt_uid = pvolume_info->linux_uid; + cifs_sb->mnt_gid = pvolume_info->linux_gid; + cifs_sb->mnt_file_mode = pvolume_info->file_mode; + cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; + cFYI(1, ("file mode: 0x%x dir mode: 0x%x", + cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); + + if (pvolume_info->noperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; + if (pvolume_info->setuids) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; + if (pvolume_info->server_ino) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; + if (pvolume_info->remap) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; + if (pvolume_info->no_xattr) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; + if (pvolume_info->sfu_emul) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; + if (pvolume_info->nobrl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; + if (pvolume_info->cifs_acl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; + if (pvolume_info->override_uid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; + if (pvolume_info->override_gid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; + if (pvolume_info->dynperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; + if (pvolume_info->direct_io) { + cFYI(1, ("mounting share using direct i/o")); + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; + } + + if ((pvolume_info->cifs_acl) && (pvolume_info->dynperm)) + cERROR(1, ("mount option dynperm ignored if cifsacl " + "mount option supported")); +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data, const char *devname) @@ -1996,9 +2082,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, goto out; } - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (volume_info.port) sin_server.sin_port = htons(volume_info.port); else @@ -2074,7 +2158,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); down(&pSesInfo->sesSem); - if (pSesInfo->status == CifsNeedReconnect) { + if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); @@ -2124,146 +2208,59 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* search for existing tcon to this server share */ if (!rc) { - if (volume_info.rsize > CIFSMaxBufSize) { - cERROR(1, ("rsize %d too large, using MaxBufSize", - volume_info.rsize)); - cifs_sb->rsize = CIFSMaxBufSize; - } else if ((volume_info.rsize) && - (volume_info.rsize <= CIFSMaxBufSize)) - cifs_sb->rsize = volume_info.rsize; - else /* default */ - cifs_sb->rsize = CIFSMaxBufSize; - - if (volume_info.wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { - cERROR(1, ("wsize %d too large, using 4096 instead", - volume_info.wsize)); - cifs_sb->wsize = 4096; - } else if (volume_info.wsize) - cifs_sb->wsize = volume_info.wsize; - else - cifs_sb->wsize = - min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE, - 127*1024); - /* old default of CIFSMaxBufSize was too small now - that SMB Write2 can send multiple pages in kvec. - RFC1001 does not describe what happens when frame - bigger than 128K is sent so use that as max in - conjunction with 52K kvec constraint on arch with 4K - page size */ - - if (cifs_sb->rsize < 2048) { - cifs_sb->rsize = 2048; - /* Windows ME may prefer this */ - cFYI(1, ("readsize set to minimum: 2048")); - } - /* calculate prepath */ - cifs_sb->prepath = volume_info.prepath; - if (cifs_sb->prepath) { - cifs_sb->prepathlen = strlen(cifs_sb->prepath); - /* we can not convert the / to \ in the path - separators in the prefixpath yet because we do not - know (until reset_cifs_unix_caps is called later) - whether POSIX PATH CAP is available. We normalize - the / to \ after reset_cifs_unix_caps is called */ - volume_info.prepath = NULL; - } else - cifs_sb->prepathlen = 0; - cifs_sb->mnt_uid = volume_info.linux_uid; - cifs_sb->mnt_gid = volume_info.linux_gid; - cifs_sb->mnt_file_mode = volume_info.file_mode; - cifs_sb->mnt_dir_mode = volume_info.dir_mode; - cFYI(1, ("file mode: 0x%x dir mode: 0x%x", - cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); - - if (volume_info.noperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; - if (volume_info.setuids) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; - if (volume_info.server_ino) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; - if (volume_info.remap) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; - if (volume_info.no_xattr) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; - if (volume_info.sfu_emul) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; - if (volume_info.nobrl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; - if (volume_info.cifs_acl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; - if (volume_info.override_uid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; - if (volume_info.override_gid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; - if (volume_info.dynperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; - if (volume_info.direct_io) { - cFYI(1, ("mounting share using direct i/o")); - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; - } - - if ((volume_info.cifs_acl) && (volume_info.dynperm)) - cERROR(1, ("mount option dynperm ignored if cifsacl " - "mount option supported")); + setup_cifs_sb(&volume_info, cifs_sb); tcon = find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); - /* we can have only one retry value for a connection - to a share so for resources mounted more than once - to the same server share the last value passed in - for the retry flag is used */ - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->local_lease = volume_info.local_lease; if (tcon->seal != volume_info.seal) cERROR(1, ("transport encryption setting " "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); - if (tcon == NULL) + if (tcon == NULL) { rc = -ENOMEM; - else { - /* check for null share name ie connecting to - * dfs root */ - - /* BB check if this works for exactly length - * three strings */ - if ((strchr(volume_info.UNC + 3, '\\') == NULL) - && (strchr(volume_info.UNC + 3, '/') == - NULL)) { -/* rc = connect_to_dfs_path(xid, pSesInfo, - "", cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR);*/ - cFYI(1, ("DFS root not supported")); - rc = -ENODEV; - goto out; - } else { - /* BB Do we need to wrap sesSem around - * this TCon call and Unix SetFS as - * we do on SessSetup and reconnect? */ - rc = CIFSTCon(xid, pSesInfo, - volume_info.UNC, - tcon, cifs_sb->local_nls); - cFYI(1, ("CIFS Tcon rc = %d", rc)); - if (volume_info.nodfs) { - tcon->Flags &= - ~SMB_SHARE_IS_IN_DFS; - cFYI(1, ("DFS disabled (%d)", - tcon->Flags)); - } - } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->seal = volume_info.seal; + goto mount_fail_check; + } + + /* check for null share name ie connect to dfs root */ + + /* BB check if works for exactly length 3 strings */ + if ((strchr(volume_info.UNC + 3, '\\') == NULL) + && (strchr(volume_info.UNC + 3, '/') == NULL)) { + /* rc = connect_to_dfs_path(...) */ + cFYI(1, ("DFS root not supported")); + rc = -ENODEV; + goto mount_fail_check; + } else { + /* BB Do we need to wrap sesSem around + * this TCon call and Unix SetFS as + * we do on SessSetup and reconnect? */ + rc = CIFSTCon(xid, pSesInfo, volume_info.UNC, + tcon, cifs_sb->local_nls); + cFYI(1, ("CIFS Tcon rc = %d", rc)); + if (volume_info.nodfs) { + tcon->Flags &= ~SMB_SHARE_IS_IN_DFS; + cFYI(1, ("DFS disabled (%d)", + tcon->Flags)); } } + if (!rc) { + atomic_inc(&pSesInfo->inUse); + tcon->seal = volume_info.seal; + } else + goto mount_fail_check; } + + /* we can have only one retry value for a connection + to a share so for resources mounted more than once + to the same server share the last value passed in + for the retry flag is used */ + tcon->retry = volume_info.retry; + tcon->nocase = volume_info.nocase; + tcon->local_lease = volume_info.local_lease; } if (pSesInfo) { if (pSesInfo->capabilities & CAP_LARGE_FILES) { @@ -2276,6 +2273,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sb->s_time_gran = 100; /* on error free sesinfo and tcon struct if needed */ +mount_fail_check: if (rc) { /* if session setup failed, use count is zero but we still need to free cifsd thread */ @@ -3518,6 +3516,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, /* above now done in SendReceive */ if ((rc == 0) && (tcon != NULL)) { tcon->tidStatus = CifsGood; + tcon->need_reconnect = false; tcon->tid = smb_buffer_response->Tid; bcc_ptr = pByteArea(smb_buffer_response); length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2); @@ -3746,6 +3745,7 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, cFYI(1, ("CIFS Session Established successfully")); spin_lock(&GlobalMid_Lock); pSesInfo->status = CifsGood; + pSesInfo->need_reconnect = false; spin_unlock(&GlobalMid_Lock); } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index ead1a3b..1540ada 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -493,7 +493,7 @@ int cifs_close(struct inode *inode, struct file *file) if (pTcon) { /* no sense reconnecting to close a file that is already closed */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { timeout = 2; while ((atomic_read(&pSMBFile->wrtPending) != 0) && (timeout <= 2048)) { -- cgit v0.10.2 From fb396016647ae9de5b3bd8c4ee4f7b9cc7148bd5 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 20:04:07 +0000 Subject: [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix Also adds two lines missing from the previous patch (for the need reconnect flag in the /proc/fs/cifs/DebugData handling) The new global_cifs_sock_list is added, and initialized in init_cifs but not used yet. Jeff Layton will be adding code in to use that and to remove the GlobalTcon and GlobalSMBSession lists. CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 69a12aa..ba8723d 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -204,7 +204,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) else seq_printf(m, " type: %d ", dev_type); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); } read_unlock(&GlobalSMBSeslock); @@ -311,7 +311,7 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) i++; tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", atomic_read(&tcon->num_smbs_sent), diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 903bbd6..af16a24 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,9 +1059,9 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); -/* INIT_LIST_HEAD(&GlobalServerList);*/ /* BB not implemented yet */ - INIT_LIST_HEAD(&GlobalSMBSessionList); - INIT_LIST_HEAD(&GlobalTreeConnectionList); + INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ + INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index dc0aa14..d6357dc 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -592,22 +592,15 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif -/* - * The list of servers that did not respond with NT LM 0.12. - * This list helps improve performance and eliminate the messages indicating - * that we had a communications error talking to the server in this list. - */ -/* Feature not supported */ -/* GLOBAL_EXTERN struct servers_not_supported *NotSuppList; */ - -/* - * The following is a hash table of all the users we know about. - */ -GLOBAL_EXTERN struct smbUidInfo *GlobalUidList[UID_HASH]; -/* GLOBAL_EXTERN struct list_head GlobalServerList; BB not implemented yet */ -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; +/* the list of TCP_Server_Info structures, ie each of the sockets + * connecting our client to a distinct server (ip address), is + * chained together by global_cifs_sock_list. The list of all our SMB + * sessions (and from that the tree connections) can be found + * by iterating over global_cifs_sock_list */ +GLOBAL_EXTERN struct list_head global_cifs_sock_list; +GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ +GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; -- cgit v0.10.2 From 6c5ab376b0b579cf58f9217dcd7a94d817f7a043 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 31 Oct 2008 10:09:57 -0700 Subject: USB: vstusb: fix compiler warning on x86-64 This fixes a reported compiler warning. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 8648470c..63dff9b 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) __func__); retval = -EFAULT; } else { - dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", __func__, usb_data.count, usb_data.pipe); } -- cgit v0.10.2 From 0047ca0a45c6a481abd467fb52d2a480ffc8c6b9 Mon Sep 17 00:00:00 2001 From: Paul Ready Date: Wed, 29 Oct 2008 14:25:50 -0700 Subject: USB: add Nikon D300 camera to unusual_devs Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fb9e20e..f379291 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -418,6 +418,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by paul ready */ +UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", -- cgit v0.10.2 From 352d026338378b1f13f044e33c1047da6e470056 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 29 Oct 2008 15:16:58 -0400 Subject: USB: don't register endpoints for interfaces that are going away This patch (as1155) fixes a bug in usbcore. When interfaces are deleted, either because the device was disconnected or because of a configuration change, the extra attribute files and child endpoint devices may get left behind. This is because the core removes them before calling device_del(). But during device_del(), after the driver is unbound the core will reinstall altsetting 0 and recreate those extra attributes and children. The patch prevents this by adding a flag to record when the interface is in the midst of being unregistered. When the flag is set, the attribute files and child devices will not be created. Signed-off-by: Alan Stern Cc: stable [2.6.27, 2.6.26, 2.6.25] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 8877385..6d1048f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); + interface->unregistering = 1; usb_remove_sysfs_intf_files(interface); device_del(&interface->dev); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f66fba1..4fb65fd 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; - if (intf->sysfs_files_created) + if (intf->sysfs_files_created || intf->unregistering) return 0; /* The interface string may be present in some altsettings diff --git a/include/linux/usb.h b/include/linux/usb.h index 8fa973b..f72aa51 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -108,6 +108,7 @@ enum usb_interface_condition { * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. * @sysfs_files_created: sysfs attributes exist + * @unregistering: flag set when the interface is being unregistered * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @needs_altsetting0: flag set when a set-interface request for altsetting 0 @@ -163,6 +164,7 @@ struct usb_interface { enum usb_interface_condition condition; /* state of binding */ unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ + unsigned unregistering:1; /* unregistration is in progress */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ -- cgit v0.10.2 From f82a689faeb328ba7c194782f42cc438519d508e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:31 +0200 Subject: usb: musb: Fix for isochronous IN transfer Fixes blurred capture images in dma mode. Isochronous error field in urb and source data buffer pointer were not updated properly in dma mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990..981d497 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1507,10 +1507,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1566,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1580,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1620,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1663,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1681,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; -- cgit v0.10.2 From 14a2c96f72e0939cb817b6624346b0161b5603db Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:36 +0200 Subject: usb: musb: tusb6010: kill compile warning Add an errno to failing case. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b73b036..ee8fca9 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) if (musb->board_mode != MUSB_OTG) { ERR("Changing mode currently only supported in OTG mode\n"); - return; + return -EINVAL; } otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); -- cgit v0.10.2 From eef767b761bdd08200fbbfc910ab815d03787326 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:38 +0200 Subject: usb: musb: Removes compilation warning in gadget mode Fixes compilation warning when musb is configured in gadget mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 9d2dcb1..ce6c162 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; unsigned long flags; +#ifdef CONFIG_USB_MUSB_HDRC_HCD u8 power; +#endif u8 devctl; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); -- cgit v0.10.2 From b60c72abdbd44ed2a63fa80455d0b7f18ce76d2b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:39 +0200 Subject: usb: musb: fix debug global variable name In order to avoid namespace conflicts, add a prefix to our kernel-wise symbol. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a35745..5280dba 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -114,8 +114,8 @@ -unsigned debug; -module_param(debug, uint, S_IRUGO | S_IWUSR); +unsigned musb_debug; +module_param(musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2248,7 +2248,7 @@ static int __init musb_init(void) "host" #endif ", debug=%d\n", - musb_driver_name, debug); + musb_driver_name, musb_debug); return platform_driver_probe(&musb_driver, musb_probe); } diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 4d27944..9fc1db4 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,11 @@ __func__, __LINE__ , ## args); \ } } while (0) -extern unsigned debug; +extern unsigned musb_debug; static inline int _dbg_level(unsigned l) { - return debug >= l; + return musb_debug >= l; } #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args) -- cgit v0.10.2 From 23d15e070c2fe5d341ca04275f6ea1b5a5fcb26f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:35 +0200 Subject: usb: musb: fix BULK request on different available endpoints Fixes co-working issue of usb serial device with usb/net devices while oter endpoints are free and can be used.This patch implements the policy that if endpoint resources are available then different BULK request goes to different endpoint otherwise they are multiplexed to one reserved endpoint as currently done. Switch statement case is reordered in musb_giveback() to take care of bulk request both in multiplex scenario and otherwise. NAK limit scheme has to be added for multiplexed BULK request scenario to avoid endpoint starvation due to usb/net devices. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 981d497..e45e70b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1708,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1762,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2052,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2104,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 77bcdb9..0b7fbcd 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -53,6 +53,7 @@ struct musb_qh { struct list_head ring; /* of musb_qh */ /* struct musb_qh *next; */ /* for periodic tree */ + u8 mux; /* qh multiplexed to hw_ep */ unsigned offset; /* in urb->transfer_buffer */ unsigned segsize; /* current xfer fragment */ -- cgit v0.10.2 From c6206faa4f18bcc837a12552b8c184ab1668fdea Mon Sep 17 00:00:00 2001 From: Leslie Watter Date: Wed, 12 Nov 2008 15:10:07 -0200 Subject: USB: Add YISO u893 usb modem vendor and product IDs to option driver This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd07eaa..6fa1ec4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -160,6 +160,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_VENDOR_ID 0x1410 +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + /* MERLIN EVDO PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_V640 0x1100 #define NOVATELWIRELESS_PRODUCT_V620 0x1110 @@ -408,6 +413,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, -- cgit v0.10.2 From 2870fde780bbdf6442e9efe7ca5fc11bcdd2a09a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 9 Nov 2008 11:40:30 +0530 Subject: USB: mention URB_FREE_BUFFER in usb_free_urb documentation The usb_free_urb comment says that the transfer buffer will not be freed, but this is not the case when URB_FREE_BUFFER is set. Signed-off-by: Rabin Vincent Acked-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 4342bd9..1f68af9 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb); * Must be called when a user of a urb is finished with it. When the last user * of the urb calls this function, the memory of the urb is freed. * - * Note: The transfer buffer associated with the urb is not freed, that must be - * done elsewhere. + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. */ void usb_free_urb(struct urb *urb) { -- cgit v0.10.2 From 881e3c9867c585e632dfa4ccb0848b62debc64c7 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 9 Nov 2008 20:17:54 +0000 Subject: USB: CP2101 Add device ID for AMB2560 This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 8008d0b..f073b58 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ -- cgit v0.10.2 From ad0b65efd12d020b046cde8d6f474e37bb98dd73 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Thu, 6 Nov 2008 11:19:11 -0800 Subject: USB: cdc-acm.c: fix recursive lock in acm_start_wb error path Fixes an obvious bug in cdc-acm by avoiding a recursive lock on acm_start_wb()'s error path. Should apply towards 2.6.27 stable and 2.6.28. ============================================= [ INFO: possible recursive locking detected ] 2.6.27-2-pae #109 --------------------------------------------- python/31449 is trying to acquire lock: (&acm->write_lock){++..}, at: [] acm_start_wb+0x5c/0x7b [cdc_acm] but task is already holding lock: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] other info that might help us debug this: 2 locks held by python/31449: #0: (&tty->atomic_write_lock){--..}, at: [] tty_write_lock+0x14/0x3b #1: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] stack backtrace: Pid: 31449, comm: python Not tainted 2.6.27-2-pae #109 [] ? printk+0xf/0x18 [] __lock_acquire+0xc7b/0x1316 [] lock_acquire+0x70/0x97 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] _spin_lock_irqsave+0x37/0x47 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_tty_write+0x143/0x167 [cdc_acm] [] write_chan+0x1cd/0x297 [] ? default_wake_function+0x0/0xd [] tty_write+0x149/0x1b9 [] ? write_chan+0x0/0x297 [] ? rw_verify_area+0x76/0x98 [] ? tty_write+0x0/0x1b9 [] vfs_write+0x8c/0x136 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x3f ======================= Signed-off-by: Brandon Philips Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 2010444..d50a99f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm) } /* - * Finish write. + * Finish write. Caller must hold acm->write_lock */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - unsigned long flags; - - spin_lock_irqsave(&acm->write_lock, flags); wb->use = 0; acm->transmitting--; - spin_unlock_irqrestore(&acm->write_lock, flags); } /* @@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb) { struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; + unsigned long flags; if (verbose || urb->status || (urb->actual_length != urb->transfer_buffer_length)) @@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb) urb->transfer_buffer_length, urb->status); + spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); if (ACM_READY(acm)) schedule_work(&acm->work); else -- cgit v0.10.2 From 8010e06cc90367b4d3fba3b0ec3ced32360ac890 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 4 Nov 2008 11:33:35 -0500 Subject: USB: unusual_devs entry for Argosy USB mass-storage interface This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by: Alan Stern Tested-by: Luciano Rocha Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f379291..b2ec152 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1265,6 +1265,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Reported by Luciano Rocha */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with -- cgit v0.10.2 From ddcb01ff9bf49c4dbbb058423559f7bc90b89374 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 31 Oct 2008 13:52:54 -0700 Subject: USB: Fix PS3 USB shutdown problems Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 0eba894..9c9da35 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; + ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2089d8a..3c1a3b5 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -192,7 +192,7 @@ fail_start: return result; } -static int ps3_ohci_remove (struct ps3_system_bus_device *dev) +static int ps3_ohci_remove(struct ps3_system_bus_device *dev) { unsigned int tmp; struct usb_hcd *hcd = @@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev) tmp = hcd->irq; + ohci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); -- cgit v0.10.2 From 659d643462fba8187f90f7604a9e0be144e242bc Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 30 Oct 2008 08:42:43 -0700 Subject: USB: storage: adjust comment in Kconfig Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 3d92496..c68b738 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" +comment "see USB_STORAGE Help for more information" depends on USB config USB_STORAGE -- cgit v0.10.2 From 9a18e75fc443d24d25ee0fcf892a64a9741f6294 Mon Sep 17 00:00:00 2001 From: Damir N Abdullin Date: Thu, 30 Oct 2008 13:52:38 -0700 Subject: + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index f073b58..9035d72 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,6 +67,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ -- cgit v0.10.2 From ff30bf1ca4b548c0928dae6bfce89458b95e5bf4 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 2 Nov 2008 15:25:42 +0100 Subject: USB: remove optional bus bindings in isp1760, fixing runtime warning Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [] kmem_cache_create+0xc9/0x3a3 | [] free_pages_bulk+0x16c/0x1c9 | [] isp1760_init+0x0/0xb [isp1760] | [] init_kmem_once+0x18/0x5f [isp1760] | [] isp1760_init+0x5/0xb [isp1760] | [] _stext+0x4d/0x148 | [] load_module+0x12cd/0x142e | [] kmem_cache_destroy+0x0/0xd7 | [] sys_init_module+0x87/0x176 | [] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing Signed-off-by: Sebastian Andrzej Siewior a Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 56f592d..f3a75a9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,29 +110,18 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB && EXPERIMENTAL && (PCI || PPC_OF) ---help--- The ISP1760 chip is a USB 2.0 host controller. This driver does not support isochronous transfers or OTG. + This USB controller is usually attached to a non-DMA-Master + capable bus. NXP's eval kit brings this chip on PCI card + where the chip itself is behind a PLB to simulate such + a bus. To compile this driver as a module, choose M here: the - module will be called isp1760-hcd. - -config USB_ISP1760_PCI - bool "Support for the PCI bus" - depends on USB_ISP1760_HCD && PCI - ---help--- - Enables support for the device present on the PCI bus. - This should only be required if you happen to have the eval kit from - NXP and you are going to test it. - -config USB_ISP1760_OF - bool "Support for the OF platform bus" - depends on USB_ISP1760_HCD && PPC_OF - ---help--- - Enables support for the device present on the PowerPC - OpenFirmware platform bus. + module will be called isp1760. config USB_OHCI_HCD tristate "OHCI HCD support" diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index af849f5..b87ca7c 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -14,16 +14,16 @@ #include "../core/hcd.h" #include "isp1760-hcd.h" -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF #include #include #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI #include #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF static int of_isp1760_probe(struct of_device *dev, const struct of_device_id *match) { @@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = { }; #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; @@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = { static int __init isp1760_init(void) { - int ret = -ENODEV; + int ret; init_kmem_once(); -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); if (ret) { deinit_kmem_cache(); return ret; } #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); if (ret) goto unreg_of; #endif return ret; -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI unreg_of: #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif deinit_kmem_cache(); @@ -319,10 +319,10 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); #endif deinit_kmem_cache(); -- cgit v0.10.2 From ed4103b3fcf38985995e732dab6c3e2b9693f6cb Mon Sep 17 00:00:00 2001 From: Ricky Wong Date: Tue, 4 Nov 2008 19:13:45 +0800 Subject: usb: unusual devs patch for Nokia 7610 Supernova Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b2ec152..d4e5fc8 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -253,6 +253,14 @@ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Submitted by Ricky Wong Yung Fei */ +/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */ +UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470, + "Nokia", + "7610 Supernova", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v0.10.2 From 859ff4072027ea7741121b902c59763f090e00c2 Mon Sep 17 00:00:00 2001 From: Albert Comerma Date: Tue, 4 Nov 2008 10:44:01 -0800 Subject: USB: SISUSB2VGA driver: add 0x0711, 0x0903 Signed-off-by: Albert Comerma Cc: Alan Cox Cc: David Brownell Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 69c34a5..b4ec716 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, -- cgit v0.10.2 From d73b7aff28bc53c04e1f2e5ccaa5ea43089fb4a4 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 10 Nov 2008 21:11:11 -0700 Subject: ub: stub pre_reset and post_reset to fix oops Due to recent changes to usb_reset_device, the following hang occurs: events/0 D 0000000000000000 0 6 2 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00 Call Trace: [] try_to_del_timer_sync+0x52/0x5b [] dma_pool_free+0x1a7/0x1ec [] ub_disconnect+0x8e/0x1ad [ub] [] autoremove_wake_function+0x0/0x2e [] usb_unbind_interface+0x5c/0xb7 [] __device_release_driver+0x95/0xbd [] device_release_driver+0x21/0x2d [] usb_driver_release_interface+0x44/0x83 [] usb_forced_unbind_intf+0x17/0x1d [] usb_reset_device+0x7d/0x114 [] ub_reset_task+0x0/0x293 [ub] [] ub_reset_task+0x1c4/0x293 [ub] [] flush_to_ldisc+0x0/0x1cd [] ub_reset_task+0x0/0x293 [ub] [] run_workqueue+0x87/0x114 [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x60 [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 This is because usb_reset_device now unbinds, and that calls disconnect, which in case of ub waits until the reset completes... which deadlocks. Worse, this deadlocks keventd and this takes whole box down. I'm going to fix this properly later, but let's unbreak the driver quickly for non-composite devices at least. Signed-off-by: Pete Zaitcev Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/block/ub.c b/drivers/block/ub.c index fccac18..048d71d 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management - * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. - * XXX Make usb_sync_reset asynchronous. */ static void ub_reset_enter(struct ub_dev *sc, int try) @@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work) } /* + * XXX Reset brackets are too much hassle to implement, so just stub them + * in order to prevent forced unbinding (which deadlocks solid when our + * ->disconnect method waits for the reset to complete and this kills keventd). + * + * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, + * or else the post_reset is invoked, and restats I/O on a locked device. + */ +static int ub_pre_reset(struct usb_interface *iface) { + return 0; +} + +static int ub_post_reset(struct usb_interface *iface) { + return 0; +} + +/* * This is called from a process context. */ static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) @@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = { .probe = ub_probe, .disconnect = ub_disconnect, .id_table = ub_usb_ids, + .pre_reset = ub_pre_reset, + .post_reset = ub_post_reset, }; static int __init ub_init(void) -- cgit v0.10.2 From 5863964608489f6dbf4b5f3118b45b3750a8274d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d879..2376f24 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v0.10.2 From 67b2e029743a52670d77864723b4d0d40f7733b5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:04:53 -0500 Subject: USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern Cc: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15a803b..4725d15 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0, cmd; + u32 status, masked_status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } - status &= INTR_MASK; - if (!status) { /* irq sharing? */ + masked_status = status & INTR_MASK; + if (!masked_status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ - ehci_writel(ehci, status, &ehci->regs->status); + ehci_writel(ehci, masked_status, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; @@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { + ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - if (status & STS_HALT) { - ehci_err (ehci, "fatal error\n"); + ehci_halt(ehci); dead: - ehci_reset (ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; - } + ehci_reset(ehci); + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + /* generic layer kills/unlinks all urbs, then + * uses ehci_stop to clean up the rest + */ + bh = 1; } if (bh) -- cgit v0.10.2 From 372dd6e8ed924e876f3beb598721e813ad7fa323 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:02:57 -0500 Subject: USB: EHCI: fix divide-by-zero bug This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern Cc: David Brownell Cc: Stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4a0c5a7..a081ee6 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -918,7 +918,7 @@ iso_stream_init ( */ stream->usecs = HS_USECS_ISO (maxp); bandwidth = stream->usecs * 8; - bandwidth /= 1 << (interval - 1); + bandwidth /= interval; } else { u32 addr; @@ -951,7 +951,7 @@ iso_stream_init ( } else stream->raw_mask = smask_out [hs_transfers - 1]; bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= 1 << (interval + 2); + bandwidth /= interval << 3; /* stream->splits gets created from raw_mask later */ stream->address = cpu_to_hc32(ehci, addr); -- cgit v0.10.2 From e50ae572b33646656fa7037541613834dcadedfb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 12 Nov 2008 11:35:13 -0800 Subject: USB: gadget: cdc-acm deadlock fix This fixes a deadlock appearing with some USB peripheral drivers when running CDC ACM gadget code. The newish (2.6.27) CDC ACM event notification mechanism sends messages (IN to the host) which are short enough to fit in most FIFOs. That means that with some peripheral controller drivers (evidently not the ones used to verify the notification code!!) the completion callback can be issued before queue() returns. The deadlock would come because the completion callback and the event-issuing code shared a spinlock. Fix is trivial: drop that lock while queueing the message. Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 5ee1590..c1d34df 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, notify->wLength = cpu_to_le16(length); memcpy(buf, data, length); + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + if (status < 0) { ERROR(acm->port.func.config->cdev, "acm ttyGS%d can't notify serial state, %d\n", -- cgit v0.10.2 From ccf95402d0ae6f433f29ce88cfd589cec8fc81ad Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 11 Nov 2008 13:02:53 -0500 Subject: USB: net: asix: add support for Cables-to-Go USB Ethernet adapter Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf84..e12cdb4 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1444,6 +1444,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v0.10.2 From 18776c7316545482a02bfaa2629a2aa1afc48357 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:38:52 +0000 Subject: dm raid1: flush workqueue before destruction We queue work on keventd queue --- so this queue must be flushed in the destructor. Otherwise, keventd could access mirror_set after it was freed. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon Cc: stable@kernel.org diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9d7b53e..ec43f9f 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); + flush_scheduled_work(); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); -- cgit v0.10.2 From 6edebdee48729ab4ba564bbfcb8dbf6a6cd68a39 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Thu, 13 Nov 2008 23:38:56 +0000 Subject: dm stripe: fix init failure Don't proceed if dm_stripe_init() fails to register itself as a dm target. Signed-off-by: Heinz Mauelshagen Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index a2d068d..9e4ef88 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,8 +320,10 @@ int __init dm_stripe_init(void) int r; r = dm_register_target(&stripe_target); - if (r < 0) + if (r < 0) { DMWARN("target registration failed"); + return r; + } kstriped = create_singlethread_workqueue("kstriped"); if (!kstriped) { -- cgit v0.10.2 From b81aa1c79201cb424114fd198607951900babe18 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:00 +0000 Subject: dm mpath: avoid attempting to activate null path Path activation code is called even when the pgpath is NULL. This could lead to a panic in activate_path(). Such a panic is seen in -rt kernel. This problem has been there before the pg_init() was moved to a workqueue. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4840733..58b1015 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; - m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) must_queue = 0; - if (m->pg_init_required && !m->pg_init_in_progress) { + if (m->pg_init_required && !m->pg_init_in_progress && pgpath) { + m->pgpath_to_activate = pgpath; m->pg_init_count++; m->pg_init_required = 0; m->pg_init_in_progress = 1; -- cgit v0.10.2 From 14e98c5ca8bed825f65cbf11cb0ffd2c09dac2f4 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:06 +0000 Subject: dm mpath: warn if args ignored Currently dm ignores the parameters provided to hardware handlers without providing any notifications to the user. This patch just prints a warning message so that the user knows that the arguments are ignored. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 58b1015..3d7f492 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) m->hw_handler_name = NULL; return -EINVAL; } + + if (hw_argc > 1) + DMWARN("Ignoring user-specified arguments for " + "hardware handler \"%s\"", m->hw_handler_name); consume(as, hw_argc - 1); return 0; -- cgit v0.10.2 From d221d2e77696e70e94b13989ea15db2ba5b34f8e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:39:10 +0000 Subject: dm: move pending queue wake_up end_io_acct This doesn't fix any bug, just moves wake_up immediately after decrementing md->pending, for better code readability. It must be clear to anyone manipulating md->pending to wake up the queue if md->pending reaches zero, so move the wakeup as close to the decrementing as possible. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6963ad1..dc25d8a 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); } -static int end_io_acct(struct dm_io *io) +static void end_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; struct bio *bio = io->bio; @@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); - return !pending; + /* nudge anyone waiting on suspend queue */ + if (!pending) + wake_up(&md->wait); } /* @@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error) spin_unlock_irqrestore(&io->md->pushback_lock, flags); } - if (end_io_acct(io)) - /* nudge anyone waiting on suspend queue */ - wake_up(&io->md->wait); + end_io_acct(io); if (io->error != DM_ENDIO_REQUEUE) { blk_add_trace_bio(io->md->queue, io->bio, -- cgit v0.10.2 From 8a57dfc6f943c92b861c9a19b0c86ddcb2aba768 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:14 +0000 Subject: dm: avoid destroying table in dm_any_congested dm_any_congested() just checks for the DMF_BLOCK_IO and has no code to make sure that suspend waits for dm_any_congested() to complete. This patch adds such a check. Without it, a race can occur with dm_table_put() attempting to destroying the table in the wrong thread, the one running dm_any_congested() which is meant to be quick and return immediately. Two examples of problems: 1. Sleeping functions called from congested code, the caller of which holds a spin lock. 2. An ABBA deadlock between pdflush and multipathd. The two locks in contention are inode lock and kernel lock. Signed-off-by: Chandra Seetharaman Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm.c b/drivers/md/dm.c index dc25d8a..c99e4728 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q) static int dm_any_congested(void *congested_data, int bdi_bits) { - int r; - struct mapped_device *md = (struct mapped_device *) congested_data; - struct dm_table *map = dm_get_table(md); + int r = bdi_bits; + struct mapped_device *md = congested_data; + struct dm_table *map; - if (!map || test_bit(DMF_BLOCK_IO, &md->flags)) - r = bdi_bits; - else - r = dm_table_any_congested(map, bdi_bits); + atomic_inc(&md->pending); + + if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + map = dm_get_table(md); + if (map) { + r = dm_table_any_congested(map, bdi_bits); + dm_table_put(map); + } + } + + if (!atomic_dec_return(&md->pending)) + /* nudge anyone waiting on suspend queue */ + wake_up(&md->wait); - dm_table_put(map); return r; } -- cgit v0.10.2 From 3ec332ef7a38c2327e18d087d4120a8e3bd3dc6e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 14 Nov 2008 03:35:10 +0000 Subject: [CIFS] clean up server protocol handling We're currently declaring both a sockaddr_in and sockaddr6_in on the stack, but we really only need storage for one of them. Declare a sockaddr struct and cast it to the proper type. Also, eliminate the protocolType field in the TCP_Server_Info struct. It's redundant since we have a sa_family field in the sockaddr anyway. We may need to revisit this if SCTP is ever implemented, but for now this will simplify the code. CIFS over IPv6 also has a number of problems currently. This fixes all of them that I found. Eventually, it would be nice to move more of the code to be protocol independent, but this is a start. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index fcee929..0ab2fb5 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -73,8 +73,8 @@ struct key_type cifs_spnego_key_type = { * strlen(";sec=ntlmsspi") */ #define MAX_MECH_STR_LEN 13 -/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */ -#define MAX_IPV6_ADDR_LEN 42 +/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/128 */ +#define MAX_IPV6_ADDR_LEN 43 /* strlen of "host=" */ #define HOST_KEY_LEN 5 diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index d6357dc..13dc484 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -85,8 +85,7 @@ enum securityEnum { }; enum protocolEnum { - IPV4 = 0, - IPV6, + TCP = 0, SCTP /* Netbios frames protocol not supported at this time */ }; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c1cd121..30ab8dc 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -193,7 +193,7 @@ cifs_reconnect(struct TCP_Server_Info *server) while ((server->tcpStatus != CifsExiting) && (server->tcpStatus != CifsGood)) { try_to_freeze(); - if (server->protocolType == IPV6) { + if (server->addr.sockAddr6.sin6_family == AF_INET6) { rc = ipv6_connect(&server->addr.sockAddr6, &server->ssocket, server->noautotune); } else { @@ -1983,10 +1983,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, { int rc = 0; int xid; - int address_type = AF_INET; struct socket *csocket = NULL; - struct sockaddr_in sin_server; - struct sockaddr_in6 sin_server6; + struct sockaddr addr; + struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; + struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; struct cifsSesInfo *existingCifsSes = NULL; @@ -1997,6 +1997,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* cFYI(1, ("Entering cifs_mount. Xid: %d with: %s", xid, mount_data)); */ + memset(&addr, 0, sizeof(struct sockaddr)); memset(&volume_info, 0, sizeof(struct smb_vol)); if (cifs_parse_mount_options(mount_data, devname, &volume_info)) { rc = -EINVAL; @@ -2019,16 +2020,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (volume_info.UNCip && volume_info.UNC) { rc = cifs_inet_pton(AF_INET, volume_info.UNCip, - &sin_server.sin_addr.s_addr); + &sin_server->sin_addr.s_addr); if (rc <= 0) { /* not ipv4 address, try ipv6 */ rc = cifs_inet_pton(AF_INET6, volume_info.UNCip, - &sin_server6.sin6_addr.in6_u); + &sin_server6->sin6_addr.in6_u); if (rc > 0) - address_type = AF_INET6; + addr.sa_family = AF_INET6; } else { - address_type = AF_INET; + addr.sa_family = AF_INET; } if (rc <= 0) { @@ -2068,39 +2069,38 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (address_type == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server.sin_addr, + if (addr.sa_family == AF_INET) + existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, NULL /* no ipv6 addr */, volume_info.username, &srvTcp); - else if (address_type == AF_INET6) { + else if (addr.sa_family == AF_INET6) { cFYI(1, ("looking for ipv6 address")); existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6.sin6_addr, + &sin_server6->sin6_addr, volume_info.username, &srvTcp); } else { rc = -EINVAL; goto out; } - if (!srvTcp) { /* create socket */ - if (volume_info.port) - sin_server.sin_port = htons(volume_info.port); - else - sin_server.sin_port = 0; - if (address_type == AF_INET6) { + if (!srvTcp) { + if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ - rc = ipv6_connect(&sin_server6, &csocket, + sin_server6->sin6_port = htons(volume_info.port); + rc = ipv6_connect(sin_server6, &csocket, volume_info.noblocksnd); - } else - rc = ipv4_connect(&sin_server, &csocket, + } else { + sin_server->sin_port = htons(volume_info.port); + rc = ipv4_connect(sin_server, &csocket, volume_info.source_rfc1001_name, volume_info.target_rfc1001_name, volume_info.noblocksnd, volume_info.noautotune); + } if (rc < 0) { - cERROR(1, ("Error connecting to IPv4 socket. " + cERROR(1, ("Error connecting to socket. " "Aborting operation")); if (csocket != NULL) sock_release(csocket); @@ -2115,12 +2115,15 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else { srvTcp->noblocksnd = volume_info.noblocksnd; srvTcp->noautotune = volume_info.noautotune; - memcpy(&srvTcp->addr.sockAddr, &sin_server, - sizeof(struct sockaddr_in)); + if (addr.sa_family == AF_INET6) + memcpy(&srvTcp->addr.sockAddr6, sin_server6, + sizeof(struct sockaddr_in6)); + else + memcpy(&srvTcp->addr.sockAddr, sin_server, + sizeof(struct sockaddr_in)); atomic_set(&srvTcp->inFlight, 0); /* BB Add code for ipv6 case too */ srvTcp->ssocket = csocket; - srvTcp->protocolType = IPV4; srvTcp->hostname = extract_hostname(volume_info.UNC); if (IS_ERR(srvTcp->hostname)) { rc = PTR_ERR(srvTcp->hostname); @@ -2172,7 +2175,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, else { pSesInfo->server = srvTcp; sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server.sin_addr.s_addr)); + NIPQUAD(sin_server->sin_addr.s_addr)); } if (!rc) { @@ -2211,7 +2214,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, setup_cifs_sb(&volume_info, cifs_sb); tcon = - find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, + find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); -- cgit v0.10.2 From e8f6fbf62de37cbc2e179176ac7010d5f4396b67 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 01:38:36 +0000 Subject: lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix this warning: net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used this is a lockdep macro problem in the !LOCKDEP case. We cannot convert it to an inline because the macro works on multiple types, but we can mark the parameter used. [ also clean up a misaligned tab in sock_lock_init_class_and_name() ] [ also remove #ifdefs from around af_family_clock_key strings - which were certainly added to get rid of the ugly build warnings. ] Signed-off-by: Ingo Molnar Signed-off-by: David S. Miller diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 331e5f1..29aec6e 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -331,10 +331,11 @@ static inline void lockdep_on(void) # define lock_set_subclass(l, s, i) do { } while (0) # define lockdep_init() do { } while (0) # define lockdep_info() do { } while (0) -# define lockdep_init_map(lock, name, key, sub) do { (void)(key); } while (0) +# define lockdep_init_map(lock, name, key, sub) \ + do { (void)(name); (void)(key); } while (0) # define lockdep_set_class(lock, key) do { (void)(key); } while (0) # define lockdep_set_class_and_name(lock, key, name) \ - do { (void)(key); } while (0) + do { (void)(key); (void)(name); } while (0) #define lockdep_set_class_and_subclass(lock, key, sub) \ do { (void)(key); } while (0) #define lockdep_set_subclass(lock, sub) do { } while (0) diff --git a/include/net/sock.h b/include/net/sock.h index c04f9e1..2f47107 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -815,7 +815,7 @@ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb) */ #define sock_lock_init_class_and_name(sk, sname, skey, name, key) \ do { \ - sk->sk_lock.owned = 0; \ + sk->sk_lock.owned = 0; \ init_waitqueue_head(&sk->sk_lock.wq); \ spin_lock_init(&(sk)->sk_lock.slock); \ debug_check_no_locks_freed((void *)&(sk)->sk_lock, \ diff --git a/net/core/sock.c b/net/core/sock.c index 5e2a313..341e394 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -136,7 +136,6 @@ static struct lock_class_key af_family_keys[AF_MAX]; static struct lock_class_key af_family_slock_keys[AF_MAX]; -#ifdef CONFIG_DEBUG_LOCK_ALLOC /* * Make lock validator output more readable. (we pre-construct these * strings build-time, so that runtime initialization of socket @@ -187,7 +186,6 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_MAX" }; -#endif /* * sk_callback_lock locking rules are per-address-family, -- cgit v0.10.2 From 131d3a7a009d56a96cc7117b4e9d0c90c2e2a1dc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 14 Nov 2008 12:03:47 +0100 Subject: HID: don't grab devices with no input Some devices have no input interrupt endpoint. These won't be handled by usbhid, but currently they are not refused and reside on hid bus. Perform this checking earlier so that we refuse to control such a device early enough (and not pass it to the hid bus at all). Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index f0339aef..d746bf8 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -849,12 +849,6 @@ static int usbhid_start(struct hid_device *hid) } } - if (!usbhid->urbin) { - err_hid("couldn't find an input interrupt endpoint"); - ret = -ENODEV; - goto fail; - } - init_waitqueue_head(&usbhid->wait); INIT_WORK(&usbhid->reset_work, hid_reset); setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); @@ -948,15 +942,26 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); struct usbhid_device *usbhid; struct hid_device *hid; + unsigned int n, has_in = 0; size_t len; int ret; dbg_hid("HID probe called for ifnum %d\n", intf->altsetting->desc.bInterfaceNumber); + for (n = 0; n < interface->desc.bNumEndpoints; n++) + if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) + has_in++; + if (!has_in) { + dev_err(&intf->dev, "couldn't find an input interrupt " + "endpoint\n"); + return -ENODEV; + } + hid = hid_allocate_device(); if (IS_ERR(hid)) return PTR_ERR(hid); -- cgit v0.10.2 From 5c6533510335ab291dcc0e9cdb98e67b50f6b2e9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:06:33 -0300 Subject: V4L/DVB (9613): tvaudio: fix a memory leak Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index b59e472..3332df8 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1481,6 +1481,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } if (desc->name == NULL) { v4l_dbg(1, debug, client, "no matching chip description found\n"); + kfree(chip); return -EIO; } v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); -- cgit v0.10.2 From 04e6f99025475a8cf2ccf2e39ffa48a6194a3b47 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:10:11 -0300 Subject: V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZE Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 3332df8..cb8bf6d 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -777,7 +777,7 @@ static struct tda9874a_MODES { char *name; audiocmd cmd; } tda9874a_modelist[9] = { - { "A2, B/G", + { "A2, B/G", /* default */ { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, { "A2, M (Korea)", { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, @@ -791,7 +791,7 @@ static struct tda9874a_MODES { { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, { "NICAM, B/G", { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, - { "NICAM, D/K", /* default */ + { "NICAM, D/K", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, { "NICAM, L", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } @@ -981,7 +981,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) { if (tda9874a_SIF > 2) tda9874a_SIF = 1; - if (tda9874a_STD > 8) + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) tda9874a_STD = 0; if(tda9874a_AMSEL > 1) tda9874a_AMSEL = 0; -- cgit v0.10.2 From af1a9951fc5c89518c25c4d9f2c4b391b2e72b83 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:14:15 -0300 Subject: V4L/DVB (9616): tvaudio: cleanup - group all callbacks together Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index cb8bf6d..1fa481c 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1260,6 +1260,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, @@ -1270,13 +1271,14 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9873h", - .checkit = tda9873_checkit, .insmodopt = &tda9873, .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, .flags = CHIP_HAS_INPUTSEL, + /* callbacks */ + .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, .checkmode = generic_checkmode, @@ -1290,12 +1292,13 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9874h/a", - .checkit = tda9874a_checkit, - .initialize = tda9874a_initialize, .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, .checkmode = generic_checkmode, @@ -1324,10 +1327,11 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA9855_VR, .bassreg = TDA9855_BA, .treblereg = TDA9855_TR, + + /* callbacks */ .volfunc = tda9855_volume, .bassfunc = tda9855_bass, .treblefunc = tda9855_treble, - .getmode = tda985x_getmode, .setmode = tda985x_setmode, @@ -1348,6 +1352,8 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6300_VL, .bassreg = TEA6300_BA, .treblereg = TEA6300_TR, + + /* callbacks */ .volfunc = tea6300_shift10, .bassfunc = tea6300_shift12, .treblefunc = tea6300_shift12, @@ -1358,7 +1364,6 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tea6320", - .initialize = tea6320_initialize, .insmodopt = &tea6320, .addr_lo = I2C_ADDR_TEA6300 >> 1, .addr_hi = I2C_ADDR_TEA6300 >> 1, @@ -1369,6 +1374,9 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6320_V, .bassreg = TEA6320_BA, .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, .volfunc = tea6320_volume, .bassfunc = tea6320_shift11, .treblefunc = tea6320_shift11, @@ -1401,16 +1409,18 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA8425_VR, .bassreg = TDA8425_BA, .treblereg = TDA8425_TR, + + /* callbacks */ + .initialize = tda8425_initialize, .volfunc = tda8425_shift10, .bassfunc = tda8425_shift12, .treblefunc = tda8425_shift12, + .setmode = tda8425_setmode, .inputreg = TDA8425_S1, .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, .inputmute = TDA8425_S1_OFF, - .setmode = tda8425_setmode, - .initialize = tda8425_initialize, }, { .name = "pic16c54 (PV951)", @@ -1435,6 +1445,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, .checkmode = generic_checkmode, -- cgit v0.10.2 From dd03e970a18f266faf120e47355349d224f64e3f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:55:39 -0300 Subject: V4L/DVB (9617): tvtime: remove generic_checkmode callback generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1fa481c..1387c54 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -58,7 +58,6 @@ typedef int (*checkit)(struct CHIPSTATE*); typedef int (*initialize)(struct CHIPSTATE*); typedef int (*getmode)(struct CHIPSTATE*); typedef void (*setmode)(struct CHIPSTATE*, int mode); -typedef void (*checkmode)(struct CHIPSTATE*); /* i2c command */ typedef struct AUDIOCMD { @@ -79,6 +78,7 @@ struct CHIPDESC { #define CHIP_HAS_VOLUME 1 #define CHIP_HAS_BASSTREBLE 2 #define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 /* various i2c command sequences */ audiocmd init; @@ -96,9 +96,6 @@ struct CHIPDESC { getmode getmode; setmode setmode; - /* check / autoswitch audio after channel switches */ - checkmode checkmode; - /* input switch register + values for v4l inputs */ int inputreg; int inputmap[4]; @@ -264,6 +261,7 @@ static int chip_thread(void *data) { struct CHIPSTATE *chip = data; struct CHIPDESC *desc = chiplist + chip->type; + int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); set_freezable(); @@ -282,7 +280,26 @@ static int chip_thread(void *data) continue; /* have a look what's going on */ - desc->checkmode(chip); + mode = desc->getmode(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", + chip->c->name); + + chip->prevmode = mode; + + if (mode & V4L2_TUNER_MODE_STEREO) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + if (mode & V4L2_TUNER_MODE_LANG1_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + else if (mode & V4L2_TUNER_MODE_LANG1) + desc->setmode(chip, V4L2_TUNER_MODE_LANG1); + else if (mode & V4L2_TUNER_MODE_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_LANG2); + else + desc->setmode(chip, V4L2_TUNER_MODE_MONO); /* schedule next check */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); @@ -292,29 +309,6 @@ static int chip_thread(void *data) return 0; } -static void generic_checkmode(struct CHIPSTATE *chip) -{ - struct CHIPDESC *desc = chiplist + chip->type; - int mode = desc->getmode(chip); - - if (mode == chip->prevmode) - return; - - v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name); - chip->prevmode = mode; - - if (mode & V4L2_TUNER_MODE_STEREO) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - if (mode & V4L2_TUNER_MODE_LANG1_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - else if (mode & V4L2_TUNER_MODE_LANG1) - desc->setmode(chip,V4L2_TUNER_MODE_LANG1); - else if (mode & V4L2_TUNER_MODE_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_LANG2); - else - desc->setmode(chip,V4L2_TUNER_MODE_MONO); -} - /* ---------------------------------------------------------------------- */ /* audio chip descriptions - defines+functions for tda9840 */ @@ -1259,12 +1253,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, - .checkmode = generic_checkmode, .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } @@ -1275,13 +1269,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, - .flags = CHIP_HAS_INPUTSEL, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, - .checkmode = generic_checkmode, .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, @@ -1295,13 +1288,13 @@ static struct CHIPDESC chiplist[] = { .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .initialize = tda9874a_initialize, .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, - .checkmode = generic_checkmode, }, { .name = "tda9850", @@ -1444,11 +1437,11 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, - .checkmode = generic_checkmode, .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, @@ -1531,7 +1524,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } chip->thread = NULL; - if (desc->checkmode) { + if (desc->flags & CHIP_NEED_CHECKMODE) { /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; @@ -1804,12 +1797,18 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode && desc->setmode) { + + /* For chips that provide getmode, setmode and checkmode, + a kthread is created to automatically to set the audio + standard. In this case, start with MONO and wait 2 seconds + for the decoding to stablize. Then, run kthread to change + to stereo, if carrier detected. + */ + if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); - /* the thread will call checkmode() later */ } break; -- cgit v0.10.2 From 099b7fcc770764ec06441066fddd90b97d868e11 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:01:15 -0300 Subject: V4L/DVB (9618): tvaudio: add additional logic to avoid OOPS This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1387c54..6c920bf7 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1511,20 +1511,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) chip_cmd(chip,"init",&desc->init); if (desc->flags & CHIP_HAS_VOLUME) { - chip->left = desc->leftinit ? desc->leftinit : 65535; - chip->right = desc->rightinit ? desc->rightinit : 65535; - chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); - chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l_info(chip->c, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } } if (desc->flags & CHIP_HAS_BASSTREBLE) { - chip->treble = desc->trebleinit ? desc->trebleinit : 32768; - chip->bass = desc->bassinit ? desc->bassinit : 32768; - chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); - chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l_info(chip->c, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } } chip->thread = NULL; if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getmode || !desc->setmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l_info(chip->c, "set/get mode callbacks undefined!\n"); + return 0; + } /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; -- cgit v0.10.2 From b4ab114cf750a49d91fc292439f8ef69a35a0fab Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:07:54 -0300 Subject: V4L/DVB (9619): tvaudio: update initial comments A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 6c920bf7..ee6aca4 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1,5 +1,5 @@ /* - * experimental driver for simple i2c audio chips. + * Driver for simple i2c audio chips. * * Copyright (c) 2000 Gerd Knorr * based on code by: @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * * This code is placed under the terms of the GNU General Public License * * OPTIONS: -- cgit v0.10.2 From 81cb5c4f7fbe6971d9c61401bc47193290fd59b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 16:22:53 -0300 Subject: V4L/DVB (9620): tvaudio: use a direct reference for chip description Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index ee6aca4..5ec369d 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -112,8 +112,9 @@ static struct CHIPDESC chiplist[]; struct CHIPSTATE { struct i2c_client *c; - /* index into CHIPDESC array */ - int type; + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; /* shadow register set */ audiocmd shadow; @@ -264,7 +265,7 @@ static void chip_thread_wake(unsigned long data) static int chip_thread(void *data) { struct CHIPSTATE *chip = data; - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); @@ -1087,7 +1088,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; @@ -1503,7 +1504,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) /* fill required data structures */ if (!id) strlcpy(client->name, desc->name, I2C_NAME_SIZE); - chip->type = desc-chiplist; + chip->desc = desc; chip->shadow.count = desc->registers+1; chip->prevmode = -1; chip->audmode = V4L2_TUNER_MODE_LANG1; @@ -1590,7 +1591,7 @@ static int chip_remove(struct i2c_client *client) static int tvaudio_get_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1630,7 +1631,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1706,7 +1707,7 @@ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct CHIPSTATE *chip = i2c_get_clientdata(client); - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); -- cgit v0.10.2 From 494264379d186bf806613d27aafb7d88d42f4212 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:03:28 -0300 Subject: V4L/DVB (9621): Avoid writing outside shadow.bytes[] array There were no check about the limits of shadow.bytes array. This offers a risk of writing values outside the limits, overriding other data areas. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 5ec369d..55b39b9 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -154,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) { unsigned char buffer[2]; - if (-1 == subaddr) { + if (subaddr < 0) { v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n", chip->c->name, val); chip->shadow.bytes[1] = val; @@ -165,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return -1; } } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n", chip->c->name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; @@ -179,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return 0; } -static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask) +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) { if (mask != 0) { - if (-1 == subaddr) { + if (subaddr < 0) { val = (chip->shadow.bytes[1] & ~mask) | (val & mask); } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); } } @@ -230,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) if (0 == cmd->count) return 0; + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + /* update our shadow register set; print bytes if (debug > 0) */ v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:", chip->c->name, name,cmd->bytes[0]); -- cgit v0.10.2 From 41f5230f3fc6296d0d88ab9f4c3c07fcbbe53e59 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:25:04 -0300 Subject: V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototype Some comments are not clear enough. Improve it to allow a better understanding of the driver behavior. While there, remove an unneeded struct prototype. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 55b39b9..779ce7f 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -106,7 +106,6 @@ struct CHIPDESC { int inputmute; int inputmask; }; -static struct CHIPDESC chiplist[]; /* current state of the chip */ struct CHIPSTATE { @@ -1856,11 +1855,13 @@ static int chip_command(struct i2c_client *client, case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - /* For chips that provide getmode, setmode and checkmode, - a kthread is created to automatically to set the audio - standard. In this case, start with MONO and wait 2 seconds - for the decoding to stablize. Then, run kthread to change - to stereo, if carrier detected. + /* For chips that provide getmode and setmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. */ if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); @@ -1905,9 +1906,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .legacy_probe = chip_legacy_probe, .id_table = chip_id, }; - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ -- cgit v0.10.2 From c6241b6c64dbe759e0eccaee913bdcf4d7960367 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 18:12:43 -0300 Subject: V4L/DVB (9623): tvaudio: Improve debug msg by printing something more human Before the patch, the used ioctl were printed as an hexadecimal code, hard to be understand without consulting the way _IO macros work. Instead, use the V4L default handler for printing such errors into a way that would be easier to understand. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 779ce7f..fb46ce4 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -34,6 +34,7 @@ #include #include +#include #include #include @@ -1732,7 +1733,10 @@ static int chip_command(struct i2c_client *client, struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chip->desc; - v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); + if (debug > 0) { + v4l_i2c_print_ioctl(chip->c, cmd); + printk("\n"); + } switch (cmd) { case AUDC_SET_RADIO: -- cgit v0.10.2 From 01a1a3cc1e3fbe718bd06a2a5d4d1a2d0fb4d7d9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Nov 2008 10:46:59 -0300 Subject: V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/treble This bug were supposed to be fixed by 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1, where a call to NULL happens. Not all tvaudio chips allow controlling bass/treble. So, the driver has a table with a flag to indicate if the chip does support it. Unfortunately, the handling of this logic were broken for a very long time (probably since the first module version). Due to that, an OOPS were generated for devices that don't support bass/treble. This were the resulting OOPS message before the patch, with debug messages enabled: tvaudio' 1-005b: VIDIOC_S_CTRL BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 22fda067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_hwdep snd soundcore tuner_simple tuner_types tea5767 tuner tvaudio bttv bridgebnep rfcomm l2cap bluetooth it87 hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirrordm_multipath dm_mod configfs videodev v4l1_compat ir_common 8139cp compat_ioctl32 v4l2_common 8139too videobuf_dma_sg videobuf_core mii btcx_risc tveeprom i915 button snd_page_alloc serio_raw drm pcspkr i2c_algo_bit i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support sr_mod cdrom sg ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbdmbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: soundcore] Pid: 15413, comm: qv4l2 Not tainted (2.6.25.14-108.fc9.i686 #1) EIP: 0060:[<00000000>] EFLAGS: 00210246 CPU: 0 EIP is at 0x0 EAX: 00008000 EBX: ebd21600 ECX: e2fd9ec4 EDX: 00200046 ESI: f8c0f0c4 EDI: f8c0f0c4 EBP: e2fd9d50 ESP: e2fd9d2c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process qv4l2 (pid: 15413, ti=e2fd9000 task=ebe44000 task.ti=e2fd9000) Stack: f8c0c6ae e2ff2a00 00000d00 e2fd9ec4 ebc4e000 e2fd9d5c f8c0c448 00000000 f899c12a e2fd9d5c f899c154 e2fd9d68 e2fd9d80 c0560185 e2fd9d88 f8f3e1d8 f8f3e1dc ebc4e034 f8f3e18c e2fd9ec4 00000000 e2fd9d90 f899c286 c008561c Call Trace: [] ? chip_command+0x266/0x4b6 [tvaudio] [] ? chip_command+0x0/0x4b6 [tvaudio] [] ? i2c_cmd+0x0/0x2f [i2c_core] [] ? i2c_cmd+0x2a/0x2f [i2c_core] [] ? device_for_each_child+0x21/0x49 [] ? i2c_clients_command+0x1c/0x1e [i2c_core] [] ? bttv_call_i2c_clients+0x14/0x16 [bttv] [] ? bttv_s_ctrl+0x1bc/0x313 [bttv] [] ? bttv_s_ctrl+0x0/0x313 [bttv] [] ? __video_do_ioctl+0x1f84/0x3726 [videodev] [] ? sock_aio_write+0x100/0x10d [] ? kmap_atomic_prot+0x1dd/0x1df [] ? enqueue_hrtimer+0xc2/0xcd [] ? copy_from_user+0x39/0x121 [] ? __video_ioctl2+0x1aa/0x24a [videodev] [] ? do_notify_resume+0x768/0x795 [] ? getnstimeofday+0x34/0xd1 [] ? autoremove_wake_function+0x0/0x33 [] ? video_ioctl2+0xf/0x13 [videodev] [] ? vfs_ioctl+0x50/0x69 [] ? do_vfs_ioctl+0x239/0x24c [] ? sys_ioctl+0x40/0x5b [] ? syscall_call+0x7/0xb [] ? cpuid4_cache_sysfs_exit+0x3d/0x69 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e2fd9d2c Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index fb46ce4..3720f0e 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1639,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; ctrl->value = chip->bass; return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; ctrl->value = chip->treble; return 0; } @@ -1705,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; chip->bass = ctrl->value; chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; - + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; chip->treble = ctrl->value; chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); @@ -1761,7 +1760,7 @@ static int chip_command(struct i2c_client *client, break; case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) return -EINVAL; break; default: -- cgit v0.10.2 From fb2e7c5e33b341699f139b2ed972dca0a463a670 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 14 Nov 2008 18:18:00 +0100 Subject: [S390] Fix range for add_active_range() in setup_memory() add_active_range() expects start_pfn + size as end_pfn value, i.e. not the pfn of the last page frame but the one behind that. We used the pfn of the last page frame so far, which can lead to a BUG_ON in move_freepages(), when the kernelcore parameter is specified (page_zone(start_page) != page_zone(end_page)). Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 62122ba..400b040 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -604,13 +604,13 @@ setup_memory(void) if (memory_chunk[i].type != CHUNK_READ_WRITE) continue; start_chunk = PFN_DOWN(memory_chunk[i].addr); - end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; + end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); end_chunk = min(end_chunk, end_pfn); if (start_chunk >= end_chunk) continue; add_active_range(0, start_chunk, end_chunk); pfn = max(start_chunk, start_pfn); - for (; pfn <= end_chunk; pfn++) + for (; pfn < end_chunk; pfn++) page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); } -- cgit v0.10.2 From 675be97a32a5f12650b86391b7431f1e10811f1e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:01 +0100 Subject: [S390] sclp: emit error message if assign storage fails Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index eb5f1b8..ec9c0bc 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) case 0x0120: break; default: + pr_warning("assign storage failed (cmd=0x%08x, " + "response=0x%04x, rn=0x%04x)\n", cmd, + sccb->header.response_code, rn); rc = -EIO; break; } -- cgit v0.10.2 From cc835f7872adef35076e4a3b6632ef79bb4805be Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 14 Nov 2008 18:18:02 +0100 Subject: [S390] kvm_s390: Fix oops in virtio device detection with "mem=" The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index ff4a693..3d44244 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -322,13 +322,13 @@ static int __init kvm_devices_init(void) return rc; } - rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE); + rc = vmem_add_mapping(real_memory_size, PAGE_SIZE); if (rc) { s390_root_dev_unregister(kvm_root); return rc; } - kvm_devices = (void *) PFN_PHYS(max_pfn); + kvm_devices = (void *) real_memory_size; ctl_set_bit(0, 9); register_external_interrupt(0x2603, kvm_extint_handler); -- cgit v0.10.2 From af4c68740e848019d8d14c52704ed8eacceddac6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:03 +0100 Subject: [S390] lockdep: fix compile bug arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn': mem_detect.c:(.text+0x10592): undefined reference to `lockdep_sys_exit' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index ed500ef..5f0c4fb 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -1116,6 +1116,8 @@ cleanup_io_leave_insn: .Ltrace_irq_on: .long trace_hardirqs_on .Ltrace_irq_off: .long trace_hardirqs_off +#endif +#ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: .long lockdep_sys_exit #endif -- cgit v0.10.2 From 632448f65001c4935ed0d3bb362017d773da2eca Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:04 +0100 Subject: [S390] ftrace: disable tracing on idle psw Disable tracing on idle psw. Otherwise it would give us huge preempt off times for idle. Which is rather pointless. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3e2c05c..04f8c67 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -136,9 +136,12 @@ static void default_idle(void) return; } trace_hardirqs_on(); + /* Don't trace preempt off for idle. */ + stop_critical_timings(); /* Wait for external, I/O or machine check interrupt. */ __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT); + start_critical_timings(); } void cpu_idle(void) -- cgit v0.10.2 From 50bec4ce5d36ebf96189dcc54e20c7fce4bf61bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:05 +0100 Subject: [S390] ftrace: fix kernel stack backchain walking With CONFIG_IRQSOFF_TRACER the trace_hardirqs_off() function includes a call to __builtin_return_address(1). But we calltrace_hardirqs_off() from early entry code. There we have just a single stack frame. So this results in a kernel stack backchain walk that would walk beyond the kernel stack. Following the NULL terminated backchain this results in a lowcore read access. To fix this we simply call trace_hardirqs_off_caller() and pass the current instruction pointer. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 5f0c4fb..08844fc 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -61,22 +61,25 @@ STACK_SIZE = 1 << STACK_SHIFT #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - l %r1,BASED(.Ltrace_irq_on) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_OFF - l %r1,BASED(.Ltrace_irq_off) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - l %r1,BASED(.Ltrace_irq_on) + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 j 1f -0: l %r1,BASED(.Ltrace_irq_off) +0: l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 1: .endm @@ -1113,9 +1116,10 @@ cleanup_io_leave_insn: .Lschedtail: .long schedule_tail .Lsysc_table: .long sys_call_table #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on: .long trace_hardirqs_on -.Ltrace_irq_off: - .long trace_hardirqs_off +.Ltrace_irq_on_caller: + .long trace_hardirqs_on_caller +.Ltrace_irq_off_caller: + .long trace_hardirqs_off_caller #endif #ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index d7ce150..41aca06 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -61,19 +61,22 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - brasl %r14,trace_hardirqs_on + basr %r2,%r0 + brasl %r14,trace_hardirqs_on_caller .endm .macro TRACE_IRQS_OFF - brasl %r14,trace_hardirqs_off + basr %r2,%r0 + brasl %r14,trace_hardirqs_off_caller .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - brasl %r14,trace_hardirqs_on + brasl %r14,trace_hardirqs_on_caller j 1f -0: brasl %r14,trace_hardirqs_off +0: brasl %r14,trace_hardirqs_off_caller 1: .endm #else -- cgit v0.10.2 From 85acc407bf1c49fb40b8f461c2c7526af736d87e Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 14 Nov 2008 18:18:06 +0100 Subject: [S390] cio: Fix refcount after moving devices. In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 4e78c82..4e40083 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work) replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev); if (replacing_cdev) { sch_attach_disconnected_device(sch, replacing_cdev); + /* Release reference from get_disc_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id); if (replacing_cdev) { sch_attach_orphaned_device(sch, replacing_cdev); + /* Release reference from get_orphaned_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } sch_create_and_recog_new_device(sch); -- cgit v0.10.2 From 74af283102b358b0da545460d0d176f473e110f6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:07 +0100 Subject: [S390] cpu topology: fix locking cpu_coregroup_map used to grab a mutex on s390 since it was only called from process context. Since c7c22e4d5c1fdebfac4dba76de7d0338c2b0d832 "block: add support for IO CPU affinity" this is not true anymore. It now also gets called from softirq context. To prevent possible deadlocks change this in architecture code and use a spinlock instead of a mutex. Cc: stable@kernel.org Cc: Jens Axboe Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 632b13e..a947899 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -65,18 +65,21 @@ static int machine_has_topology_irq; static struct timer_list topology_timer; static void set_topology_timer(void); static DECLARE_WORK(topology_work, topology_work_fn); +/* topology_lock protects the core linked list */ +static DEFINE_SPINLOCK(topology_lock); cpumask_t cpu_core_map[NR_CPUS]; cpumask_t cpu_coregroup_map(unsigned int cpu) { struct core_info *core = &core_info; + unsigned long flags; cpumask_t mask; cpus_clear(mask); if (!machine_has_topology) return cpu_present_map; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irqsave(&topology_lock, flags); while (core) { if (cpu_isset(cpu, core->mask)) { mask = core->mask; @@ -84,7 +87,7 @@ cpumask_t cpu_coregroup_map(unsigned int cpu) } core = core->next; } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irqrestore(&topology_lock, flags); if (cpus_empty(mask)) mask = cpumask_of_cpu(cpu); return mask; @@ -133,7 +136,7 @@ static void tl_to_cores(struct tl_info *info) union tl_entry *tle, *end; struct core_info *core = &core_info; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irq(&topology_lock); clear_cores(); tle = info->tle; end = (union tl_entry *)((unsigned long)info + info->length); @@ -157,7 +160,7 @@ static void tl_to_cores(struct tl_info *info) } tle = next_tle(tle); } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irq(&topology_lock); } static void topology_update_polarization_simple(void) -- cgit v0.10.2 From a9cffb227d59db526286cc9f84bf258e68a97470 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 14 Nov 2008 18:18:08 +0100 Subject: [S390] dasd: log sense for fatal errors The logging of sense data for fatal errors was accidentally removed during Hyper PAV implementation. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4b76fca..363bd13 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1746,6 +1746,11 @@ restart: goto restart; } + /* log sense for fatal error */ + if (cqr->status == DASD_CQR_FAILED) { + dasd_log_sense(cqr, &cqr->irb); + } + /* First of all call extended error reporting. */ if (dasd_eer_enabled(base) && cqr->status == DASD_CQR_FAILED) { -- cgit v0.10.2 From d2f019fe40e8fecd822f87bc759f74925a5c31d6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Nov 2008 18:18:09 +0100 Subject: [S390] fix s390x_newuname The uname system call for 64 bit compares current->personality without masking the upper 16 bits. If e.g. READ_IMPLIES_EXEC is set the result of a uname system call will always be s390x even if the process uses the s390 personality. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index 5fdb799..4fe952e 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -198,7 +198,7 @@ asmlinkage long s390x_newuname(struct new_utsname __user *name) { int ret = sys_newuname(name); - if (current->personality == PER_LINUX32 && !ret) { + if (personality(current->personality) == PER_LINUX32 && !ret) { ret = copy_to_user(name->machine, "s390\0\0\0\0", 8); if (ret) ret = -EFAULT; } -- cgit v0.10.2 From 31c00fc15ebd35c1647775dbfc167a15d46657fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 13 Nov 2008 21:33:24 +0000 Subject: Create/use more directory structure in the Documentation/ tree. Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85c..2f969e2 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -42,14 +42,8 @@ IRQ.txt - description of what an IRQ is. ManagementStyle - how to (attempt to) manage kernel hackers. -MSI-HOWTO.txt - - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. RCU/ - directory with info on RCU (read-copy update). -README.DAC960 - - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. -README.cycladesZ - - info on Cyclades-Z firmware loading. SAK.txt - info on Secure Attention Keys. SM501.txt @@ -86,20 +80,16 @@ blackfin/ - directory with documentation for the Blackfin arch. block/ - info on the Block I/O (BIO) layer. +blockdev/ + - info on block devices & drivers cachetlb.txt - describes the cache/TLB flushing interfaces Linux uses. -cciss.txt - - info, major/minor #'s for Compaq's SMART Array Controllers. cdrom/ - directory with information on the CD-ROM drivers that Linux has. -computone.txt - - info on Computone Intelliport II/Plus Multiport Serial Driver. connector/ - docs on the netlink based userspace<->kernel space communication mod. console/ - documentation on Linux console drivers. -cpqarray.txt - - info on using Compaq's SMART2 Intelligent Disk Array Controllers. cpu-freq/ - info on CPU frequency and voltage scaling. cpu-hotplug.txt @@ -126,8 +116,6 @@ device-mapper/ - directory with info on Device Mapper. devices.txt - plain ASCII listing of all the nodes in /dev/ with major minor #'s. -digiepca.txt - - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. dontdiff - file containing a list of files that should never be diff'ed. driver-model/ @@ -152,14 +140,10 @@ filesystems/ - info on the vfs and the various filesystems that Linux supports. firmware_class/ - request_firmware() hotplug interface info. -floppy.txt - - notes and driver options for the floppy disk driver. frv/ - Fujitsu FR-V Linux documentation. gpio.txt - overview of GPIO (General Purpose Input/Output) access conventions. -hayes-esp.txt - - info on using the Hayes ESP serial driver. highuid.txt - notes on the change from 16 bit to 32 bit user/group IDs. timers/ @@ -186,8 +170,6 @@ io_ordering.txt - info on ordering I/O writes to memory-mapped addresses. ioctl/ - directory with documents describing various IOCTL calls. -ioctl-number.txt - - how to implement and register device/driver ioctl calls. iostats.txt - info on I/O statistics Linux kernel provides. irqflags-tracing.txt @@ -250,14 +232,10 @@ mips/ - directory with info about Linux on MIPS architecture. mono.txt - how to execute Mono-based .NET binaries with the help of BINFMT_MISC. -moxa-smartio - - file with info on installing/using Moxa multiport serial driver. mutex-design.txt - info on the generic mutex subsystem. namespaces/ - directory with various information about namespaces -nbd.txt - - info on a TCP implementation of a network block device. netlabel/ - directory with information on the NetLabel subsystem. networking/ @@ -270,8 +248,6 @@ numastat.txt - info on how to read Numa policy hit/miss statistics in sysfs. oops-tracing.txt - how to decode those nasty internal kernel error dump messages. -paride.txt - - information about the parallel port IDE subsystem. parisc/ - directory with info on using Linux on PA-RISC architecture. parport.txt @@ -292,18 +268,12 @@ preempt-locking.txt - info on locking under a preemptive kernel. prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. -ramdisk.txt - - short guide on how to set up and use the RAM disk. rbtree.txt - info on what red-black trees are and what they are for. -riscom8.txt - - notes on using the RISCom/8 multi-port serial driver. robust-futex-ABI.txt - documentation of the robust futex ABI. robust-futexes.txt - a description of what robust futexes are. -rocket.txt - - info on the Comtrol RocketPort multiport serial driver. rt-mutex-design.txt - description of the RealTime mutex implementation design. rt-mutex.txt @@ -332,8 +302,6 @@ sparc/ - directory with info on using Linux on Sparc architecture. sparse.txt - info on how to obtain and use the sparse tool for typechecking. -specialix.txt - - info on hardware/driver for specialix IO8+ multiport serial card. spi/ - overview of Linux kernel Serial Peripheral Interface (SPI) support. spinlocks.txt @@ -342,14 +310,10 @@ stable_api_nonsense.txt - info on why the kernel does not have a stable in-kernel api or abi. stable_kernel_rules.txt - rules and procedures for the -stable kernel releases. -stallion.txt - - info on using the Stallion multiport serial driver. svga.txt - short guide on selecting video modes at boot via VGA BIOS. sysfs-rules.txt - How not to use sysfs. -sx.txt - - info on the Specialix SX/SI multiport serial driver. sysctl/ - directory with info on the /proc/sys/* files. sysrq.txt @@ -358,8 +322,6 @@ telephony/ - directory with info on telephony (e.g. voice over IP) support. time_interpolators.txt - info on time interpolators. -tty.txt - - guide to the locking policies of the tty layer. uml/ - directory with information about User Mode Linux. unicode.txt diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt deleted file mode 100644 index 256defd7..0000000 --- a/Documentation/MSI-HOWTO.txt +++ /dev/null @@ -1,509 +0,0 @@ - The MSI Driver Guide HOWTO - Tom L Nguyen tom.l.nguyen@intel.com - 10/03/2003 - Revised Feb 12, 2004 by Martine Silbermann - email: Martine.Silbermann@hp.com - Revised Jun 25, 2004 by Tom L Nguyen - -1. About this guide - -This guide describes the basics of Message Signaled Interrupts (MSI), -the advantages of using MSI over traditional interrupt mechanisms, -and how to enable your driver to use MSI or MSI-X. Also included is -a Frequently Asked Questions (FAQ) section. - -1.1 Terminology - -PCI devices can be single-function or multi-function. In either case, -when this text talks about enabling or disabling MSI on a "device -function," it is referring to one specific PCI device and function and -not to all functions on a PCI device (unless the PCI device has only -one function). - -2. Copyright 2003 Intel Corporation - -3. What is MSI/MSI-X? - -Message Signaled Interrupt (MSI), as described in the PCI Local Bus -Specification Revision 2.3 or later, is an optional feature, and a -required feature for PCI Express devices. MSI enables a device function -to request service by sending an Inbound Memory Write on its PCI bus to -the FSB as a Message Signal Interrupt transaction. Because MSI is -generated in the form of a Memory Write, all transaction conditions, -such as a Retry, Master-Abort, Target-Abort or normal completion, are -supported. - -A PCI device that supports MSI must also support pin IRQ assertion -interrupt mechanism to provide backward compatibility for systems that -do not support MSI. In systems which support MSI, the bus driver is -responsible for initializing the message address and message data of -the device function's MSI/MSI-X capability structure during device -initial configuration. - -An MSI capable device function indicates MSI support by implementing -the MSI/MSI-X capability structure in its PCI capability list. The -device function may implement both the MSI capability structure and -the MSI-X capability structure; however, the bus driver should not -enable both. - -The MSI capability structure contains Message Control register, -Message Address register and Message Data register. These registers -provide the bus driver control over MSI. The Message Control register -indicates the MSI capability supported by the device. The Message -Address register specifies the target address and the Message Data -register specifies the characteristics of the message. To request -service, the device function writes the content of the Message Data -register to the target address. The device and its software driver -are prohibited from writing to these registers. - -The MSI-X capability structure is an optional extension to MSI. It -uses an independent and separate capability structure. There are -some key advantages to implementing the MSI-X capability structure -over the MSI capability structure as described below. - - - Support a larger maximum number of vectors per function. - - - Provide the ability for system software to configure - each vector with an independent message address and message - data, specified by a table that resides in Memory Space. - - - MSI and MSI-X both support per-vector masking. Per-vector - masking is an optional extension of MSI but a required - feature for MSI-X. Per-vector masking provides the kernel the - ability to mask/unmask a single MSI while running its - interrupt service routine. If per-vector masking is - not supported, then the device driver should provide the - hardware/software synchronization to ensure that the device - generates MSI when the driver wants it to do so. - -4. Why use MSI? - -As a benefit to the simplification of board design, MSI allows board -designers to remove out-of-band interrupt routing. MSI is another -step towards a legacy-free environment. - -Due to increasing pressure on chipset and processor packages to -reduce pin count, the need for interrupt pins is expected to -diminish over time. Devices, due to pin constraints, may implement -messages to increase performance. - -PCI Express endpoints uses INTx emulation (in-band messages) instead -of IRQ pin assertion. Using INTx emulation requires interrupt -sharing among devices connected to the same node (PCI bridge) while -MSI is unique (non-shared) and does not require BIOS configuration -support. As a result, the PCI Express technology requires MSI -support for better interrupt performance. - -Using MSI enables the device functions to support two or more -vectors, which can be configured to target different CPUs to -increase scalability. - -5. Configuring a driver to use MSI/MSI-X - -By default, the kernel will not enable MSI/MSI-X on all devices that -support this capability. The CONFIG_PCI_MSI kernel option -must be selected to enable MSI/MSI-X support. - -5.1 Including MSI/MSI-X support into the kernel - -To allow MSI/MSI-X capable device drivers to selectively enable -MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described -below), the VECTOR based scheme needs to be enabled by setting -CONFIG_PCI_MSI during kernel config. - -Since the target of the inbound message is the local APIC, providing -CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. - -5.2 Configuring for MSI support - -Due to the non-contiguous fashion in vector assignment of the -existing Linux kernel, this version does not support multiple -messages regardless of a device function is capable of supporting -more than one vector. To enable MSI on a device function's MSI -capability structure requires a device driver to call the function -pci_enable_msi() explicitly. - -5.2.1 API pci_enable_msi - -int pci_enable_msi(struct pci_dev *dev) - -With this new API, a device driver that wants to have MSI -enabled on its device function must call this API to enable MSI. -A successful call will initialize the MSI capability structure -with ONE vector, regardless of whether a device function is -capable of supporting multiple messages. This vector replaces the -pre-assigned dev->irq with a new MSI vector. To avoid a conflict -of the new assigned vector with existing pre-assigned vector requires -a device driver to call this API before calling request_irq(). - -5.2.2 API pci_disable_msi - -void pci_disable_msi(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msi() -when a device driver is unloading. This API restores dev->irq with -the pre-assigned IOAPIC vector and switches a device's interrupt -mode to PCI pin-irq assertion/INTx emulation mode. - -Note that a device driver should always call free_irq() on the MSI vector -that it has done request_irq() on before calling this API. Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. - -5.2.3 MSI mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-capable device function between MSI mode and -PIN-IRQ assertion mode. - - ------------ pci_enable_msi ------------------------ - | | <=============== | | - | MSI MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msi ------------------------ - - -Figure 1. MSI Mode vs. Legacy Mode - -In Figure 1, a device operates by default in legacy mode. Legacy -in this context means PCI pin-irq assertion or PCI-Express INTx -emulation. A successful MSI request (using pci_enable_msi()) switches -a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem and a new -assigned MSI vector will replace dev->irq. - -To return back to its default mode, a device driver should always call -pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a -device driver should always call free_irq() on the MSI vector it has -done request_irq() on before calling pci_disable_msi(). Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. Otherwise, the PCI subsystem restores a device's -dev->irq with a pre-assigned IOAPIC vector and marks the released -MSI vector as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve this MSI vector for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, this MSI may be re-assigned. - -For the case where the PCI subsystem re-assigns this MSI vector to -another driver, a request to switch back to MSI mode may result -in being assigned a different MSI vector or a failure if no more -vectors are available. - -5.3 Configuring for MSI-X support - -Due to the ability of the system software to configure each vector of -the MSI-X capability structure with an independent message address -and message data, the non-contiguous fashion in vector assignment of -the existing Linux kernel has no impact on supporting multiple -messages on an MSI-X capable device functions. To enable MSI-X on -a device function's MSI-X capability structure requires its device -driver to call the function pci_enable_msix() explicitly. - -The function pci_enable_msix(), once invoked, enables either -all or nothing, depending on the current availability of PCI vector -resources. If the PCI vector resources are available for the number -of vectors requested by a device driver, this function will configure -the MSI-X table of the MSI-X capability structure of a device with -requested messages. To emphasize this reason, for example, a device -may be capable for supporting the maximum of 32 vectors while its -software driver usually may request 4 vectors. It is recommended -that the device driver should call this function once during the -initialization phase of the device driver. - -Unlike the function pci_enable_msi(), the function pci_enable_msix() -does not replace the pre-assigned IOAPIC dev->irq with a new MSI -vector because the PCI subsystem writes the 1:1 vector-to-entry mapping -into the field vector of each element contained in a second argument. -Note that the pre-assigned IOAPIC dev->irq is valid only if the device -operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at -using dev->irq by the device driver to request for interrupt service -may result in unpredictable behavior. - -For each MSI-X vector granted, a device driver is responsible for calling -other functions like request_irq(), enable_irq(), etc. to enable -this vector with its corresponding interrupt service handler. It is -a device driver's choice to assign all vectors with the same -interrupt service handler or each vector with a unique interrupt -service handler. - -5.3.1 Handling MMIO address space of MSI-X Table - -The PCI 3.0 specification has implementation notes that MMIO address -space for a device's MSI-X structure should be isolated so that the -software system can set different pages for controlling accesses to the -MSI-X structure. The implementation of MSI support requires the PCI -subsystem, not a device driver, to maintain full control of the MSI-X -table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X -table/MSI-X PBA. A device driver should not access the MMIO address -space of the MSI-X table/MSI-X PBA. - -5.3.2 API pci_enable_msix - -int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) - -This API enables a device driver to request the PCI subsystem -to enable MSI-X messages on its hardware device. Depending on -the availability of PCI vectors resources, the PCI subsystem enables -either all or none of the requested vectors. - -Argument 'dev' points to the device (pci_dev) structure. - -Argument 'entries' is a pointer to an array of msix_entry structs. -The number of entries is indicated in argument 'nvec'. -struct msix_entry is defined in /driver/pci/msi.h: - -struct msix_entry { - u16 vector; /* kernel uses to write alloc vector */ - u16 entry; /* driver uses to specify entry */ -}; - -A device driver is responsible for initializing the field 'entry' of -each element with a unique entry supported by MSI-X table. Otherwise, --EINVAL will be returned as a result. A successful return of zero -indicates the PCI subsystem completed initializing each of the requested -entries of the MSI-X table with message address and message data. -Last but not least, the PCI subsystem will write the 1:1 -vector-to-entry mapping into the field 'vector' of each element. A -device driver is responsible for keeping track of allocated MSI-X -vectors in its internal data structure. - -A return of zero indicates that the number of MSI-X vectors was -successfully allocated. A return of greater than zero indicates -MSI-X vector shortage. Or a return of less than zero indicates -a failure. This failure may be a result of duplicate entries -specified in second argument, or a result of no available vector, -or a result of failing to initialize MSI-X table entries. - -5.3.3 API pci_disable_msix - -void pci_disable_msix(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msix() -when a device driver is unloading. Note that a device driver should -always call free_irq() on all MSI-X vectors it has done request_irq() -on before calling this API. Failure to do so results in a BUG_ON() and -a device will be left with MSI-X enabled and leaks its vectors. - -5.3.4 MSI-X mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-X capable device function between MSI-X mode and -PIN-IRQ assertion mode (legacy). - - ------------ pci_enable_msix(,,n) ------------------------ - | | <=============== | | - | MSI-X MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msix ------------------------ - -Figure 2. MSI-X Mode vs. Legacy Mode - -In Figure 2, a device operates by default in legacy mode. A -successful MSI-X request (using pci_enable_msix()) switches a -device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem; however, -unlike MSI mode, the PCI subsystem will not replace dev->irq with -assigned MSI-X vector because the PCI subsystem already writes the 1:1 -vector-to-entry mapping into the field 'vector' of each element -specified in second argument. - -To return back to its default mode, a device driver should always call -pci_disable_msix() to undo the effect of pci_enable_msix(). Note that -a device driver should always call free_irq() on all MSI-X vectors it -has done request_irq() on before calling pci_disable_msix(). Failure -to do so results in a BUG_ON() and a device will be left with MSI-X -enabled and leaks its vectors. Otherwise, the PCI subsystem switches a -device function's interrupt mode from MSI-X mode to legacy mode and -marks all allocated MSI-X vectors as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve these MSI-X vectors for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, these MSI-X vectors may be -re-assigned. - -For the case where the PCI subsystem re-assigned these MSI-X vectors -to other drivers, a request to switch back to MSI-X mode may result -being assigned with another set of MSI-X vectors or a failure if no -more vectors are available. - -5.4 Handling function implementing both MSI and MSI-X capabilities - -For the case where a function implements both MSI and MSI-X -capabilities, the PCI subsystem enables a device to run either in MSI -mode or MSI-X mode but not both. A device driver determines whether it -wants MSI or MSI-X enabled on its hardware device. Once a device -driver requests for MSI, for example, it is prohibited from requesting -MSI-X; in other words, a device driver is not permitted to ping-pong -between MSI mod MSI-X mode during a run-time. - -5.5 Hardware requirements for MSI/MSI-X support - -MSI/MSI-X support requires support from both system hardware and -individual hardware device functions. - -5.5.1 Required x86 hardware support - -Since the target of MSI address is the local APIC CPU, enabling -MSI/MSI-X support in the Linux kernel is dependent on whether existing -system hardware supports local APIC. Users should verify that their -system supports local APIC operation by testing that it runs when -CONFIG_X86_LOCAL_APIC=y. - -In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; -however, in UP environment, users must manually set -CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting -CONFIG_PCI_MSI enables the VECTOR based scheme and the option for -MSI-capable device drivers to selectively enable MSI/MSI-X. - -Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X -vector is allocated new during runtime and MSI/MSI-X support does not -depend on BIOS support. This key independency enables MSI/MSI-X -support on future IOxAPIC free platforms. - -5.5.2 Device hardware support - -The hardware device function supports MSI by indicating the -MSI/MSI-X capability structure on its PCI capability list. By -default, this capability structure will not be initialized by -the kernel to enable MSI during the system boot. In other words, -the device function is running on its default pin assertion mode. -Note that in many cases the hardware supporting MSI have bugs, -which may result in system hangs. The software driver of specific -MSI-capable hardware is responsible for deciding whether to call -pci_enable_msi or not. A return of zero indicates the kernel -successfully initialized the MSI/MSI-X capability structure of the -device function. The device function is now running on MSI/MSI-X mode. - -5.6 How to tell whether MSI/MSI-X is enabled on device function - -At the driver level, a return of zero from the function call of -pci_enable_msi()/pci_enable_msix() indicates to a device driver that -its device function is initialized successfully and ready to run in -MSI/MSI-X mode. - -At the user level, users can use the command 'cat /proc/interrupts' -to display the vectors allocated for devices and their interrupt -MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is -enabled on a SCSI Adaptec 39320D Ultra320 controller. - - CPU0 CPU1 - 0: 324639 0 IO-APIC-edge timer - 1: 1186 0 IO-APIC-edge i8042 - 2: 0 0 XT-PIC cascade - 12: 2797 0 IO-APIC-edge i8042 - 14: 6543 0 IO-APIC-edge ide0 - 15: 1 0 IO-APIC-edge ide1 -169: 0 0 IO-APIC-level uhci-hcd -185: 0 0 IO-APIC-level uhci-hcd -193: 138 10 PCI-MSI aic79xx -201: 30 0 PCI-MSI aic79xx -225: 30 0 IO-APIC-level aic7xxx -233: 30 0 IO-APIC-level aic7xxx -NMI: 0 0 -LOC: 324553 325068 -ERR: 0 -MIS: 0 - -6. MSI quirks - -Several PCI chipsets or devices are known to not support MSI. -The PCI stack provides 3 possible levels of MSI disabling: -* on a single device -* on all devices behind a specific bridge -* globally - -6.1. Disabling MSI on a single device - -Under some circumstances it might be required to disable MSI on a -single device. This may be achieved by either not calling pci_enable_msi() -or all, or setting the pci_dev->no_msi flag before (most of the time -in a quirk). - -6.2. Disabling MSI below a bridge - -The vast majority of MSI quirks are required by PCI bridges not -being able to route MSI between busses. In this case, MSI have to be -disabled on all devices behind this bridge. It is achieves by setting -the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge -subordinate bus. There is no need to set the same flag on bridges that -are below the broken bridge. When pci_enable_msi() is called to enable -MSI on a device, pci_msi_supported() takes care of checking the NO_MSI -flag in all parent busses of the device. - -Some bridges actually support dynamic MSI support enabling/disabling -by changing some bits in their PCI configuration space (especially -the Hypertransport chipsets such as the nVidia nForce and Serverworks -HT2000). It may then be required to update the NO_MSI flag on the -corresponding devices in the sysfs hierarchy. To enable MSI support -on device "0000:00:0e", do: - - echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus - -To disable MSI support, echo 0 instead of 1. Note that it should be -used with caution since changing this value might break interrupts. - -6.3. Disabling MSI globally - -Some extreme cases may require to disable MSI globally on the system. -For now, the only known case is a Serverworks PCI-X chipsets (MSI are -not supported on several busses that are not all connected to the -chipset in the Linux PCI hierarchy). In the vast majority of other -cases, disabling only behind a specific bridge is enough. - -For debugging purpose, the user may also pass pci=nomsi on the kernel -command-line to explicitly disable MSI globally. But, once the appro- -priate quirks are added to the kernel, this option should not be -required anymore. - -6.4. Finding why MSI cannot be enabled on a device - -Assuming that MSI are not enabled on a device, you should look at -dmesg to find messages that quirks may output when disabling MSI -on some devices, some bridges or even globally. -Then, lspci -t gives the list of bridges above a device. Reading -/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI -are enabled (1) or disabled (0). In 0 is found in a single bridge -msi_bus file above the device, MSI cannot be enabled. - -7. FAQ - -Q1. Are there any limitations on using the MSI? - -A1. If the PCI device supports MSI and conforms to the -specification and the platform supports the APIC local bus, -then using MSI should work. - -Q2. Will it work on all the Pentium processors (P3, P4, Xeon, -AMD processors)? In P3 IPI's are transmitted on the APIC local -bus and in P4 and Xeon they are transmitted on the system -bus. Are there any implications with this? - -A2. MSI support enables a PCI device sending an inbound -memory write (0xfeexxxxx as target address) on its PCI bus -directly to the FSB. Since the message address has a -redirection hint bit cleared, it should work. - -Q3. The target address 0xfeexxxxx will be translated by the -Host Bridge into an interrupt message. Are there any -limitations on the chipsets such as Intel 8xx, Intel e7xxx, -or VIA? - -A3. If these chipsets support an inbound memory write with -target address set as 0xfeexxxxx, as conformed to PCI -specification 2.3 or latest, then it should work. - -Q4. From the driver point of view, if the MSI is lost because -of errors occurring during inbound memory write, then it may -wait forever. Is there a mechanism for it to recover? - -A4. Since the target of the transaction is an inbound memory -write, all transaction termination conditions (Retry, -Master-Abort, Target-Abort, or normal completion) are -supported. A device sending an MSI must abide by all the PCI -rules and conditions regarding that inbound memory write. So, -if a retry is signaled it must retry, etc... We believe that -the recommendation for Abort is also a retry (refer to PCI -specification 2.3 or latest). diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX index 49f4394..812b17f 100644 --- a/Documentation/PCI/00-INDEX +++ b/Documentation/PCI/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file +MSI-HOWTO.txt + - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. PCI-DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms PCIEBUS-HOWTO.txt diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt new file mode 100644 index 0000000..256defd7 --- /dev/null +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -0,0 +1,509 @@ + The MSI Driver Guide HOWTO + Tom L Nguyen tom.l.nguyen@intel.com + 10/03/2003 + Revised Feb 12, 2004 by Martine Silbermann + email: Martine.Silbermann@hp.com + Revised Jun 25, 2004 by Tom L Nguyen + +1. About this guide + +This guide describes the basics of Message Signaled Interrupts (MSI), +the advantages of using MSI over traditional interrupt mechanisms, +and how to enable your driver to use MSI or MSI-X. Also included is +a Frequently Asked Questions (FAQ) section. + +1.1 Terminology + +PCI devices can be single-function or multi-function. In either case, +when this text talks about enabling or disabling MSI on a "device +function," it is referring to one specific PCI device and function and +not to all functions on a PCI device (unless the PCI device has only +one function). + +2. Copyright 2003 Intel Corporation + +3. What is MSI/MSI-X? + +Message Signaled Interrupt (MSI), as described in the PCI Local Bus +Specification Revision 2.3 or later, is an optional feature, and a +required feature for PCI Express devices. MSI enables a device function +to request service by sending an Inbound Memory Write on its PCI bus to +the FSB as a Message Signal Interrupt transaction. Because MSI is +generated in the form of a Memory Write, all transaction conditions, +such as a Retry, Master-Abort, Target-Abort or normal completion, are +supported. + +A PCI device that supports MSI must also support pin IRQ assertion +interrupt mechanism to provide backward compatibility for systems that +do not support MSI. In systems which support MSI, the bus driver is +responsible for initializing the message address and message data of +the device function's MSI/MSI-X capability structure during device +initial configuration. + +An MSI capable device function indicates MSI support by implementing +the MSI/MSI-X capability structure in its PCI capability list. The +device function may implement both the MSI capability structure and +the MSI-X capability structure; however, the bus driver should not +enable both. + +The MSI capability structure contains Message Control register, +Message Address register and Message Data register. These registers +provide the bus driver control over MSI. The Message Control register +indicates the MSI capability supported by the device. The Message +Address register specifies the target address and the Message Data +register specifies the characteristics of the message. To request +service, the device function writes the content of the Message Data +register to the target address. The device and its software driver +are prohibited from writing to these registers. + +The MSI-X capability structure is an optional extension to MSI. It +uses an independent and separate capability structure. There are +some key advantages to implementing the MSI-X capability structure +over the MSI capability structure as described below. + + - Support a larger maximum number of vectors per function. + + - Provide the ability for system software to configure + each vector with an independent message address and message + data, specified by a table that resides in Memory Space. + + - MSI and MSI-X both support per-vector masking. Per-vector + masking is an optional extension of MSI but a required + feature for MSI-X. Per-vector masking provides the kernel the + ability to mask/unmask a single MSI while running its + interrupt service routine. If per-vector masking is + not supported, then the device driver should provide the + hardware/software synchronization to ensure that the device + generates MSI when the driver wants it to do so. + +4. Why use MSI? + +As a benefit to the simplification of board design, MSI allows board +designers to remove out-of-band interrupt routing. MSI is another +step towards a legacy-free environment. + +Due to increasing pressure on chipset and processor packages to +reduce pin count, the need for interrupt pins is expected to +diminish over time. Devices, due to pin constraints, may implement +messages to increase performance. + +PCI Express endpoints uses INTx emulation (in-band messages) instead +of IRQ pin assertion. Using INTx emulation requires interrupt +sharing among devices connected to the same node (PCI bridge) while +MSI is unique (non-shared) and does not require BIOS configuration +support. As a result, the PCI Express technology requires MSI +support for better interrupt performance. + +Using MSI enables the device functions to support two or more +vectors, which can be configured to target different CPUs to +increase scalability. + +5. Configuring a driver to use MSI/MSI-X + +By default, the kernel will not enable MSI/MSI-X on all devices that +support this capability. The CONFIG_PCI_MSI kernel option +must be selected to enable MSI/MSI-X support. + +5.1 Including MSI/MSI-X support into the kernel + +To allow MSI/MSI-X capable device drivers to selectively enable +MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described +below), the VECTOR based scheme needs to be enabled by setting +CONFIG_PCI_MSI during kernel config. + +Since the target of the inbound message is the local APIC, providing +CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. + +5.2 Configuring for MSI support + +Due to the non-contiguous fashion in vector assignment of the +existing Linux kernel, this version does not support multiple +messages regardless of a device function is capable of supporting +more than one vector. To enable MSI on a device function's MSI +capability structure requires a device driver to call the function +pci_enable_msi() explicitly. + +5.2.1 API pci_enable_msi + +int pci_enable_msi(struct pci_dev *dev) + +With this new API, a device driver that wants to have MSI +enabled on its device function must call this API to enable MSI. +A successful call will initialize the MSI capability structure +with ONE vector, regardless of whether a device function is +capable of supporting multiple messages. This vector replaces the +pre-assigned dev->irq with a new MSI vector. To avoid a conflict +of the new assigned vector with existing pre-assigned vector requires +a device driver to call this API before calling request_irq(). + +5.2.2 API pci_disable_msi + +void pci_disable_msi(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msi() +when a device driver is unloading. This API restores dev->irq with +the pre-assigned IOAPIC vector and switches a device's interrupt +mode to PCI pin-irq assertion/INTx emulation mode. + +Note that a device driver should always call free_irq() on the MSI vector +that it has done request_irq() on before calling this API. Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. + +5.2.3 MSI mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-capable device function between MSI mode and +PIN-IRQ assertion mode. + + ------------ pci_enable_msi ------------------------ + | | <=============== | | + | MSI MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msi ------------------------ + + +Figure 1. MSI Mode vs. Legacy Mode + +In Figure 1, a device operates by default in legacy mode. Legacy +in this context means PCI pin-irq assertion or PCI-Express INTx +emulation. A successful MSI request (using pci_enable_msi()) switches +a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem and a new +assigned MSI vector will replace dev->irq. + +To return back to its default mode, a device driver should always call +pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a +device driver should always call free_irq() on the MSI vector it has +done request_irq() on before calling pci_disable_msi(). Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. Otherwise, the PCI subsystem restores a device's +dev->irq with a pre-assigned IOAPIC vector and marks the released +MSI vector as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve this MSI vector for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, this MSI may be re-assigned. + +For the case where the PCI subsystem re-assigns this MSI vector to +another driver, a request to switch back to MSI mode may result +in being assigned a different MSI vector or a failure if no more +vectors are available. + +5.3 Configuring for MSI-X support + +Due to the ability of the system software to configure each vector of +the MSI-X capability structure with an independent message address +and message data, the non-contiguous fashion in vector assignment of +the existing Linux kernel has no impact on supporting multiple +messages on an MSI-X capable device functions. To enable MSI-X on +a device function's MSI-X capability structure requires its device +driver to call the function pci_enable_msix() explicitly. + +The function pci_enable_msix(), once invoked, enables either +all or nothing, depending on the current availability of PCI vector +resources. If the PCI vector resources are available for the number +of vectors requested by a device driver, this function will configure +the MSI-X table of the MSI-X capability structure of a device with +requested messages. To emphasize this reason, for example, a device +may be capable for supporting the maximum of 32 vectors while its +software driver usually may request 4 vectors. It is recommended +that the device driver should call this function once during the +initialization phase of the device driver. + +Unlike the function pci_enable_msi(), the function pci_enable_msix() +does not replace the pre-assigned IOAPIC dev->irq with a new MSI +vector because the PCI subsystem writes the 1:1 vector-to-entry mapping +into the field vector of each element contained in a second argument. +Note that the pre-assigned IOAPIC dev->irq is valid only if the device +operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at +using dev->irq by the device driver to request for interrupt service +may result in unpredictable behavior. + +For each MSI-X vector granted, a device driver is responsible for calling +other functions like request_irq(), enable_irq(), etc. to enable +this vector with its corresponding interrupt service handler. It is +a device driver's choice to assign all vectors with the same +interrupt service handler or each vector with a unique interrupt +service handler. + +5.3.1 Handling MMIO address space of MSI-X Table + +The PCI 3.0 specification has implementation notes that MMIO address +space for a device's MSI-X structure should be isolated so that the +software system can set different pages for controlling accesses to the +MSI-X structure. The implementation of MSI support requires the PCI +subsystem, not a device driver, to maintain full control of the MSI-X +table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X +table/MSI-X PBA. A device driver should not access the MMIO address +space of the MSI-X table/MSI-X PBA. + +5.3.2 API pci_enable_msix + +int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) + +This API enables a device driver to request the PCI subsystem +to enable MSI-X messages on its hardware device. Depending on +the availability of PCI vectors resources, the PCI subsystem enables +either all or none of the requested vectors. + +Argument 'dev' points to the device (pci_dev) structure. + +Argument 'entries' is a pointer to an array of msix_entry structs. +The number of entries is indicated in argument 'nvec'. +struct msix_entry is defined in /driver/pci/msi.h: + +struct msix_entry { + u16 vector; /* kernel uses to write alloc vector */ + u16 entry; /* driver uses to specify entry */ +}; + +A device driver is responsible for initializing the field 'entry' of +each element with a unique entry supported by MSI-X table. Otherwise, +-EINVAL will be returned as a result. A successful return of zero +indicates the PCI subsystem completed initializing each of the requested +entries of the MSI-X table with message address and message data. +Last but not least, the PCI subsystem will write the 1:1 +vector-to-entry mapping into the field 'vector' of each element. A +device driver is responsible for keeping track of allocated MSI-X +vectors in its internal data structure. + +A return of zero indicates that the number of MSI-X vectors was +successfully allocated. A return of greater than zero indicates +MSI-X vector shortage. Or a return of less than zero indicates +a failure. This failure may be a result of duplicate entries +specified in second argument, or a result of no available vector, +or a result of failing to initialize MSI-X table entries. + +5.3.3 API pci_disable_msix + +void pci_disable_msix(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msix() +when a device driver is unloading. Note that a device driver should +always call free_irq() on all MSI-X vectors it has done request_irq() +on before calling this API. Failure to do so results in a BUG_ON() and +a device will be left with MSI-X enabled and leaks its vectors. + +5.3.4 MSI-X mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-X capable device function between MSI-X mode and +PIN-IRQ assertion mode (legacy). + + ------------ pci_enable_msix(,,n) ------------------------ + | | <=============== | | + | MSI-X MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msix ------------------------ + +Figure 2. MSI-X Mode vs. Legacy Mode + +In Figure 2, a device operates by default in legacy mode. A +successful MSI-X request (using pci_enable_msix()) switches a +device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem; however, +unlike MSI mode, the PCI subsystem will not replace dev->irq with +assigned MSI-X vector because the PCI subsystem already writes the 1:1 +vector-to-entry mapping into the field 'vector' of each element +specified in second argument. + +To return back to its default mode, a device driver should always call +pci_disable_msix() to undo the effect of pci_enable_msix(). Note that +a device driver should always call free_irq() on all MSI-X vectors it +has done request_irq() on before calling pci_disable_msix(). Failure +to do so results in a BUG_ON() and a device will be left with MSI-X +enabled and leaks its vectors. Otherwise, the PCI subsystem switches a +device function's interrupt mode from MSI-X mode to legacy mode and +marks all allocated MSI-X vectors as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve these MSI-X vectors for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, these MSI-X vectors may be +re-assigned. + +For the case where the PCI subsystem re-assigned these MSI-X vectors +to other drivers, a request to switch back to MSI-X mode may result +being assigned with another set of MSI-X vectors or a failure if no +more vectors are available. + +5.4 Handling function implementing both MSI and MSI-X capabilities + +For the case where a function implements both MSI and MSI-X +capabilities, the PCI subsystem enables a device to run either in MSI +mode or MSI-X mode but not both. A device driver determines whether it +wants MSI or MSI-X enabled on its hardware device. Once a device +driver requests for MSI, for example, it is prohibited from requesting +MSI-X; in other words, a device driver is not permitted to ping-pong +between MSI mod MSI-X mode during a run-time. + +5.5 Hardware requirements for MSI/MSI-X support + +MSI/MSI-X support requires support from both system hardware and +individual hardware device functions. + +5.5.1 Required x86 hardware support + +Since the target of MSI address is the local APIC CPU, enabling +MSI/MSI-X support in the Linux kernel is dependent on whether existing +system hardware supports local APIC. Users should verify that their +system supports local APIC operation by testing that it runs when +CONFIG_X86_LOCAL_APIC=y. + +In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; +however, in UP environment, users must manually set +CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting +CONFIG_PCI_MSI enables the VECTOR based scheme and the option for +MSI-capable device drivers to selectively enable MSI/MSI-X. + +Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X +vector is allocated new during runtime and MSI/MSI-X support does not +depend on BIOS support. This key independency enables MSI/MSI-X +support on future IOxAPIC free platforms. + +5.5.2 Device hardware support + +The hardware device function supports MSI by indicating the +MSI/MSI-X capability structure on its PCI capability list. By +default, this capability structure will not be initialized by +the kernel to enable MSI during the system boot. In other words, +the device function is running on its default pin assertion mode. +Note that in many cases the hardware supporting MSI have bugs, +which may result in system hangs. The software driver of specific +MSI-capable hardware is responsible for deciding whether to call +pci_enable_msi or not. A return of zero indicates the kernel +successfully initialized the MSI/MSI-X capability structure of the +device function. The device function is now running on MSI/MSI-X mode. + +5.6 How to tell whether MSI/MSI-X is enabled on device function + +At the driver level, a return of zero from the function call of +pci_enable_msi()/pci_enable_msix() indicates to a device driver that +its device function is initialized successfully and ready to run in +MSI/MSI-X mode. + +At the user level, users can use the command 'cat /proc/interrupts' +to display the vectors allocated for devices and their interrupt +MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is +enabled on a SCSI Adaptec 39320D Ultra320 controller. + + CPU0 CPU1 + 0: 324639 0 IO-APIC-edge timer + 1: 1186 0 IO-APIC-edge i8042 + 2: 0 0 XT-PIC cascade + 12: 2797 0 IO-APIC-edge i8042 + 14: 6543 0 IO-APIC-edge ide0 + 15: 1 0 IO-APIC-edge ide1 +169: 0 0 IO-APIC-level uhci-hcd +185: 0 0 IO-APIC-level uhci-hcd +193: 138 10 PCI-MSI aic79xx +201: 30 0 PCI-MSI aic79xx +225: 30 0 IO-APIC-level aic7xxx +233: 30 0 IO-APIC-level aic7xxx +NMI: 0 0 +LOC: 324553 325068 +ERR: 0 +MIS: 0 + +6. MSI quirks + +Several PCI chipsets or devices are known to not support MSI. +The PCI stack provides 3 possible levels of MSI disabling: +* on a single device +* on all devices behind a specific bridge +* globally + +6.1. Disabling MSI on a single device + +Under some circumstances it might be required to disable MSI on a +single device. This may be achieved by either not calling pci_enable_msi() +or all, or setting the pci_dev->no_msi flag before (most of the time +in a quirk). + +6.2. Disabling MSI below a bridge + +The vast majority of MSI quirks are required by PCI bridges not +being able to route MSI between busses. In this case, MSI have to be +disabled on all devices behind this bridge. It is achieves by setting +the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge +subordinate bus. There is no need to set the same flag on bridges that +are below the broken bridge. When pci_enable_msi() is called to enable +MSI on a device, pci_msi_supported() takes care of checking the NO_MSI +flag in all parent busses of the device. + +Some bridges actually support dynamic MSI support enabling/disabling +by changing some bits in their PCI configuration space (especially +the Hypertransport chipsets such as the nVidia nForce and Serverworks +HT2000). It may then be required to update the NO_MSI flag on the +corresponding devices in the sysfs hierarchy. To enable MSI support +on device "0000:00:0e", do: + + echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus + +To disable MSI support, echo 0 instead of 1. Note that it should be +used with caution since changing this value might break interrupts. + +6.3. Disabling MSI globally + +Some extreme cases may require to disable MSI globally on the system. +For now, the only known case is a Serverworks PCI-X chipsets (MSI are +not supported on several busses that are not all connected to the +chipset in the Linux PCI hierarchy). In the vast majority of other +cases, disabling only behind a specific bridge is enough. + +For debugging purpose, the user may also pass pci=nomsi on the kernel +command-line to explicitly disable MSI globally. But, once the appro- +priate quirks are added to the kernel, this option should not be +required anymore. + +6.4. Finding why MSI cannot be enabled on a device + +Assuming that MSI are not enabled on a device, you should look at +dmesg to find messages that quirks may output when disabling MSI +on some devices, some bridges or even globally. +Then, lspci -t gives the list of bridges above a device. Reading +/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI +are enabled (1) or disabled (0). In 0 is found in a single bridge +msi_bus file above the device, MSI cannot be enabled. + +7. FAQ + +Q1. Are there any limitations on using the MSI? + +A1. If the PCI device supports MSI and conforms to the +specification and the platform supports the APIC local bus, +then using MSI should work. + +Q2. Will it work on all the Pentium processors (P3, P4, Xeon, +AMD processors)? In P3 IPI's are transmitted on the APIC local +bus and in P4 and Xeon they are transmitted on the system +bus. Are there any implications with this? + +A2. MSI support enables a PCI device sending an inbound +memory write (0xfeexxxxx as target address) on its PCI bus +directly to the FSB. Since the message address has a +redirection hint bit cleared, it should work. + +Q3. The target address 0xfeexxxxx will be translated by the +Host Bridge into an interrupt message. Are there any +limitations on the chipsets such as Intel 8xx, Intel e7xxx, +or VIA? + +A3. If these chipsets support an inbound memory write with +target address set as 0xfeexxxxx, as conformed to PCI +specification 2.3 or latest, then it should work. + +Q4. From the driver point of view, if the MSI is lost because +of errors occurring during inbound memory write, then it may +wait forever. Is there a mechanism for it to recover? + +A4. Since the target of the transaction is an inbound memory +write, all transaction termination conditions (Retry, +Master-Abort, Target-Abort, or normal completion) are +supported. A device sending an MSI must abide by all the PCI +rules and conditions regarding that inbound memory write. So, +if a retry is signaled it must retry, etc... We believe that +the recommendation for Abort is also a retry (refer to PCI +specification 2.3 or latest). diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960 deleted file mode 100644 index 0e8f618..0000000 --- a/Documentation/README.DAC960 +++ /dev/null @@ -1,756 +0,0 @@ - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Version 2.2.11 for Linux 2.2.19 - Version 2.4.11 for Linux 2.4.12 - - PRODUCTION RELEASE - - 11 October 2001 - - Leonard N. Zubkoff - Dandelion Digital - lnz@dandelion.com - - Copyright 1998-2001 by Leonard N. Zubkoff - - - INTRODUCTION - -Mylex, Inc. designs and manufactures a variety of high performance PCI RAID -controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, -California 94555, USA and can be reached at 510.796.6100 or on the World Wide -Web at http://www.mylex.com. Mylex Technical Support can be reached by -electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at -510.745.7715. Contact information for offices in Europe and Japan is available -on their Web site. - -The latest information on Linux support for DAC960 PCI RAID Controllers, as -well as the most recent release of this driver, will always be available from -my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 -driver supports all current Mylex PCI RAID controllers including the new -eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely -new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, -and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as -minimum firmware version requirements. For simplicity, in most places this -documentation refers to DAC960 generically rather than explicitly listing all -the supported models. - -Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". -Please include with the bug report the complete configuration messages reported -by the driver at startup, along with any subsequent system messages relevant to -the controller's operation, and a detailed description of your system's -hardware configuration. Driver bugs are actually quite rare; if you encounter -problems with disks being marked offline, for example, please contact Mylex -Technical Support as the problem is related to the hardware configuration -rather than the Linux driver. - -Please consult the RAID controller documentation for detailed information -regarding installation and configuration of the controllers. This document -primarily provides information specific to the Linux support. - - - DRIVER FEATURES - -The DAC960 RAID controllers are supported solely as high performance RAID -controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 -driver operates at the block device level, the same level as the SCSI and IDE -drivers. Unlike other RAID controllers currently supported on Linux, the -DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the -complexity and unnecessary code that would be associated with an implementation -as a SCSI driver. The DAC960 driver is designed for as high a performance as -possible with no compromises or extra code for compatibility with lower -performance devices. The DAC960 driver includes extensive error logging and -online configuration management capabilities. Except for initial configuration -of the controller and adding new disk drives, most everything can be handled -from Linux while the system is operational. - -The DAC960 driver is architected to support up to 8 controllers per system. -Each DAC960 parallel SCSI controller can support up to 15 disk drives per -channel, for a maximum of 60 drives on a four channel controller; the fibre -channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for -a total of 250 drives. The drives installed on a controller are divided into -one or more "Drive Groups", and then each Drive Group is subdivided further -into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level -and caching policy associated with it, and it appears to Linux as a single -block device. Logical Drives are further subdivided into up to 7 partitions -through the normal Linux and PC disk partitioning schemes. Logical Drives are -also known as "System Drives", and Drive Groups are also called "Packs". Both -terms are in use in the Mylex documentation; I have chosen to standardize on -the more generic "Logical Drive" and "Drive Group". - -DAC960 RAID disk devices are named in the style of the obsolete Device File -System (DEVFS). The device corresponding to Logical Drive D on Controller C -is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 -through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on -Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI -disks the device names will not change in the event of a disk drive failure. -The DAC960 driver is assigned major numbers 48 - 55 with one major number per -controller. The 8 bits of minor number are divided into 5 bits for the Logical -Drive and 3 bits for the partition. - - - SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS - -The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID -PCI RAID Controllers as of the date of this document. It is recommended that -anyone purchasing a Mylex PCI RAID Controller not in the following table -contact the author beforehand to verify that it is or will be supported. - -eXtremeRAID 3000 - 1 Wide Ultra-2/LVD SCSI channel - 2 External Fibre FC-AL channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -eXtremeRAID 2000 - 4 Wide Ultra-160 LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 352 - 2 Wide Ultra-160 LVD SCSI channels - 100MHz Intel i960RN RISC Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 170 - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RM RISC Processor - 16MB/32MB/64MB ECC SDRAM Memory - -AcceleRAID 160 (AcceleRAID 170LP) - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RS RISC Processor - Built in 16M ECC SDRAM Memory - PCI Low Profile Form Factor - fit for 2U height - -eXtremeRAID 1100 (DAC1164P) - 3 Wide Ultra-2/LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup - -AcceleRAID 250 (DAC960PTL1) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 200 (DAC960PTL0) - Uses onboard Symbios SCSI chips on certain motherboards - Includes no onboard SCSI Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 150 (DAC960PRL) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 33MHz Intel i960RP RISC Processor - 4MB Parity EDO Memory - -DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels - 33MHz Intel i960RP RISC Processor - 4MB/8MB ECC EDO Memory - -DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PD 1/2/3 Wide Fast SCSI-2 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PL 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960P 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version -6.00-01 or above is required. - -For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. - -For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is -required. - -For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. - -For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version -3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware -version 2.73-0-00 or above is required (for single Flash ROM controllers) - -Please note that not all SCSI disk drives are suitable for use with DAC960 -controllers, and only particular firmware versions of any given model may -actually function correctly. Similarly, not all motherboards have a BIOS that -properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, -DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. -If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to -verify compatibility. Mylex makes available a hard disk compatibility list at -http://www.mylex.com/support/hdcomp/hd-lists.html. - - - DRIVER INSTALLATION - -This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. - -To install the DAC960 RAID driver, you may use the following commands, -replacing "/usr/src" with wherever you keep your Linux kernel source tree: - - cd /usr/src - tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) - mv README.DAC960 linux/Documentation - mv DAC960.[ch] linux/drivers/block - patch -p0 < DAC960.patch (if DAC960.patch is included) - cd linux - make config - make bzImage (or zImage) - -Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your -standard kernel, run lilo if appropriate, and reboot. - -To create the necessary devices in /dev, the "make_rd" script included in -"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. -LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive -are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with -statically linked executables of LILO and FDISK. This modified version of LILO -will allow booting from a DAC960 controller and/or mounting the root file -system from a DAC960. - -Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID -controllers. Installing directly onto a DAC960 may be problematic from other -Linux distributions until their installation utilities are updated. - - - INSTALLATION NOTES - -Before installing Linux or adding DAC960 logical drives to an existing Linux -system, the controller must first be configured to provide one or more logical -drives using the BIOS Configuration Utility or DACCF. Please note that since -there are only at most 6 usable partitions on each logical drive, systems -requiring more partitions should subdivide a drive group into multiple logical -drives, each of which can have up to 6 usable partitions. Also, note that with -large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) -rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do -will cause the logical drive geometry to have more than 65535 cylinders which -will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry -can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M -during the BIOS initialization sequence. - -For maximum performance and the most efficient E2FSCK performance, it is -recommended that EXT2 file systems be built with a 4KB block size and 16 block -stride to match the DAC960 controller's 64KB default stripe size. The command -"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a -large number of small files on the file systems, it is also beneficial to add -the "-i 16384" option to increase the bytes per inode parameter thereby -reducing the file system metadata. Finally, on systems that will only be run -with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks -with the "-s 1" option. - - - DAC960 ANNOUNCEMENTS MAILING LIST - -The DAC960 Announcements Mailing List provides a forum for informing Linux -users of new driver releases and other announcements regarding Linux support -for DAC960 PCI RAID Controllers. To join the mailing list, send a message to -"dac960-announce-request@dandelion.com" with the line "subscribe" in the -message body. - - - CONTROLLER CONFIGURATION AND STATUS MONITORING - -The DAC960 RAID controllers running firmware 4.06 or above include a Background -Initialization facility so that system downtime is minimized both for initial -installation and subsequent configuration of additional storage. The BIOS -Configuration Utility (accessible via Alt-R during the BIOS initialization -sequence) is used to quickly configure the controller, and then the logical -drives that have been created are available for immediate use even while they -are still being initialized by the controller. The primary need for online -configuration and status monitoring is then to avoid system downtime when disk -drives fail and must be replaced. Mylex's online monitoring and configuration -utilities are being ported to Linux and will become available at some point in -the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) -enclosure, the controller is able to rebuild failed drives automatically as -soon as a drive replacement is made available. - -The primary interfaces for controller configuration and status monitoring are -special files created in the /proc/rd/... hierarchy along with the normal -system console logging mechanism. Whenever the system is operating, the DAC960 -driver queries each controller for status information every 10 seconds, and -checks for additional conditions every 60 seconds. The initial status of each -controller is always available for controller N in /proc/rd/cN/initial_status, -and the current status as of the last status monitoring query is available in -/proc/rd/cN/current_status. In addition, status changes are also logged by the -driver to the system console and will appear in the log files maintained by -syslog. The progress of asynchronous rebuild or consistency check operations -is also available in /proc/rd/cN/current_status, and progress messages are -logged to the system console at most every 60 seconds. - -Starting with the 2.2.3/2.0.3 versions of the driver, the status information -available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been -augmented to include the vendor, model, revision, and serial number (if -available) for each physical device found connected to the controller: - -***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PRL PCI RAID Controller - Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB - PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned - PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - SAF-TE Enclosure Management Enabled - Physical Devices: - 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68016775HA - Disk Status: Online, 17928192 blocks - 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68004E53HA - Disk Status: Online, 17928192 blocks - 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13013935HA - Disk Status: Online, 17928192 blocks - 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13016897HA - Disk Status: Online, 17928192 blocks - 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68019905HA - Disk Status: Online, 17928192 blocks - 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68012753HA - Disk Status: Online, 17928192 blocks - 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -To simplify the monitoring process for custom software, the special file -/proc/rd/status returns "OK" when all DAC960 controllers in the system are -operating normally and no failures have occurred, or "ALERT" if any logical -drives are offline or critical or any non-standby physical drives are dead. - -Configuration commands for controller N are available via the special file -/proc/rd/cN/user_command. A human readable command can be written to this -special file to initiate a configuration operation, and the results of the -operation can then be read back from the special file in addition to being -logged to the system console. The shell command sequence - - echo "" > /proc/rd/c0/user_command - cat /proc/rd/c0/user_command - -is typically used to execute configuration commands. The configuration -commands are: - - flush-cache - - The "flush-cache" command flushes the controller's cache. The system - automatically flushes the cache at shutdown or if the driver module is - unloaded, so this command is only needed to be certain a write back cache - is flushed to disk before the system is powered off by a command to a UPS. - Note that the flush-cache command also stops an asynchronous rebuild or - consistency check, so it should not be used except when the system is being - halted. - - kill : - - The "kill" command marks the physical drive : as DEAD. - This command is provided primarily for testing, and should not be used - during normal system operation. - - make-online : - - The "make-online" command changes the physical drive : - from status DEAD to status ONLINE. In cases where multiple physical drives - have been killed simultaneously, this command may be used to bring all but - one of them back online, after which a rebuild to the final drive is - necessary. - - Warning: make-online should only be used on a dead physical drive that is - an active part of a drive group, never on a standby drive. The command - should never be used on a dead drive that is part of a critical logical - drive; rebuild should be used if only a single drive is dead. - - make-standby : - - The "make-standby" command changes physical drive : - from status DEAD to status STANDBY. It should only be used in cases where - a dead drive was replaced after an automatic rebuild was performed onto a - standby drive. It cannot be used to add a standby drive to the controller - configuration if one was not created initially; the BIOS Configuration - Utility must be used for that currently. - - rebuild : - - The "rebuild" command initiates an asynchronous rebuild onto physical drive - :. It should only be used when a dead drive has been - replaced. - - check-consistency - - The "check-consistency" command initiates an asynchronous consistency check - of with automatic restoration. It can be used - whenever it is desired to verify the consistency of the redundancy - information. - - cancel-rebuild - cancel-consistency-check - - The "cancel-rebuild" and "cancel-consistency-check" commands cancel any - rebuild or consistency check operations previously initiated. - - - EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group without a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:1 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages indicating that Logical -Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:1 is now DEAD -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -The Sense Keys logged here are just Check Condition / Unit Attention conditions -arising from a SCSI bus reset that is forced by the controller during its error -recovery procedures. Concurrently with the above, the driver status available -from /proc/rd also reflects the drive failure. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Dead, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -Since there are no standby drives configured, the system can continue to access -the logical drives in a performance degraded mode until the failed drive is -replaced and a rebuild operation completed to restore the redundancy of the -logical drives. Once Physical Drive 1:1 is replaced with a properly -functioning drive, or if the physical drive was killed without having failed -(e.g., due to electrical problems on the SCSI bus), the user can instruct the -controller to initiate a rebuild operation onto the newly replaced drive: - -gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Rebuild of Physical Drive 1:1 Initiated - -The echo command instructs the controller to initiate an asynchronous rebuild -operation onto Physical Drive 1:1, and the status message that results from the -operation is then available for reading from /proc/rd/c0/user_command, as well -as being logged to the console by the driver. - -Within 10 seconds of this command the driver logs the initiation of the -asynchronous rebuild operation: - -DAC960#0: Rebuild of Physical Drive 1:1 Initiated -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:1 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed - -and every minute a progress message is logged to the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:1 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - - - EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group with a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Standby, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:2 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages: - -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:2 is now DEAD -DAC960#0: Physical Drive 1:2 killed because it was removed -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -Since a standby drive is configured, the controller automatically begins -rebuilding onto the standby drive: - -DAC960#0: Physical Drive 1:3 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -Concurrently with the above, the driver status available from /proc/rd also -reflects the drive failure and automatic rebuild. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed - -and every minute a progress message is logged on the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:3 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -Note that the absence of a viable standby drive does not create an "ALERT" -status. Once dead Physical Drive 1:2 has been replaced, the controller must be -told that this has occurred and that the newly replaced drive should become the -new standby drive: - -gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Make Standby of Physical Drive 1:2 Succeeded - -The echo command instructs the controller to make Physical Drive 1:2 into a -standby drive, and the status message that results from the operation is then -available for reading from /proc/rd/c0/user_command, as well as being logged to -the console by the driver. Within 60 seconds of this command the driver logs: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:2 is now STANDBY -DAC960#0: Make Standby of Physical Drive 1:2 Succeeded - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Standby, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully diff --git a/Documentation/README.cycladesZ b/Documentation/README.cycladesZ deleted file mode 100644 index 024a694..0000000 --- a/Documentation/README.cycladesZ +++ /dev/null @@ -1,8 +0,0 @@ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ - diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX new file mode 100644 index 0000000..86f054c --- /dev/null +++ b/Documentation/blockdev/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - this file +README.DAC960 + - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. +cciss.txt + - info, major/minor #'s for Compaq's SMART Array Controllers. +cpqarray.txt + - info on using Compaq's SMART2 Intelligent Disk Array Controllers. +floppy.txt + - notes and driver options for the floppy disk driver. +nbd.txt + - info on a TCP implementation of a network block device. +paride.txt + - information about the parallel port IDE subsystem. +ramdisk.txt + - short guide on how to set up and use the RAM disk. diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 new file mode 100644 index 0000000..0e8f618 --- /dev/null +++ b/Documentation/blockdev/README.DAC960 @@ -0,0 +1,756 @@ + Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers + + Version 2.2.11 for Linux 2.2.19 + Version 2.4.11 for Linux 2.4.12 + + PRODUCTION RELEASE + + 11 October 2001 + + Leonard N. Zubkoff + Dandelion Digital + lnz@dandelion.com + + Copyright 1998-2001 by Leonard N. Zubkoff + + + INTRODUCTION + +Mylex, Inc. designs and manufactures a variety of high performance PCI RAID +controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, +California 94555, USA and can be reached at 510.796.6100 or on the World Wide +Web at http://www.mylex.com. Mylex Technical Support can be reached by +electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at +510.745.7715. Contact information for offices in Europe and Japan is available +on their Web site. + +The latest information on Linux support for DAC960 PCI RAID Controllers, as +well as the most recent release of this driver, will always be available from +my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 +driver supports all current Mylex PCI RAID controllers including the new +eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely +new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, +and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as +minimum firmware version requirements. For simplicity, in most places this +documentation refers to DAC960 generically rather than explicitly listing all +the supported models. + +Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". +Please include with the bug report the complete configuration messages reported +by the driver at startup, along with any subsequent system messages relevant to +the controller's operation, and a detailed description of your system's +hardware configuration. Driver bugs are actually quite rare; if you encounter +problems with disks being marked offline, for example, please contact Mylex +Technical Support as the problem is related to the hardware configuration +rather than the Linux driver. + +Please consult the RAID controller documentation for detailed information +regarding installation and configuration of the controllers. This document +primarily provides information specific to the Linux support. + + + DRIVER FEATURES + +The DAC960 RAID controllers are supported solely as high performance RAID +controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 +driver operates at the block device level, the same level as the SCSI and IDE +drivers. Unlike other RAID controllers currently supported on Linux, the +DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the +complexity and unnecessary code that would be associated with an implementation +as a SCSI driver. The DAC960 driver is designed for as high a performance as +possible with no compromises or extra code for compatibility with lower +performance devices. The DAC960 driver includes extensive error logging and +online configuration management capabilities. Except for initial configuration +of the controller and adding new disk drives, most everything can be handled +from Linux while the system is operational. + +The DAC960 driver is architected to support up to 8 controllers per system. +Each DAC960 parallel SCSI controller can support up to 15 disk drives per +channel, for a maximum of 60 drives on a four channel controller; the fibre +channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for +a total of 250 drives. The drives installed on a controller are divided into +one or more "Drive Groups", and then each Drive Group is subdivided further +into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level +and caching policy associated with it, and it appears to Linux as a single +block device. Logical Drives are further subdivided into up to 7 partitions +through the normal Linux and PC disk partitioning schemes. Logical Drives are +also known as "System Drives", and Drive Groups are also called "Packs". Both +terms are in use in the Mylex documentation; I have chosen to standardize on +the more generic "Logical Drive" and "Drive Group". + +DAC960 RAID disk devices are named in the style of the obsolete Device File +System (DEVFS). The device corresponding to Logical Drive D on Controller C +is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 +through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on +Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI +disks the device names will not change in the event of a disk drive failure. +The DAC960 driver is assigned major numbers 48 - 55 with one major number per +controller. The 8 bits of minor number are divided into 5 bits for the Logical +Drive and 3 bits for the partition. + + + SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS + +The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID +PCI RAID Controllers as of the date of this document. It is recommended that +anyone purchasing a Mylex PCI RAID Controller not in the following table +contact the author beforehand to verify that it is or will be supported. + +eXtremeRAID 3000 + 1 Wide Ultra-2/LVD SCSI channel + 2 External Fibre FC-AL channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +eXtremeRAID 2000 + 4 Wide Ultra-160 LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 352 + 2 Wide Ultra-160 LVD SCSI channels + 100MHz Intel i960RN RISC Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 170 + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RM RISC Processor + 16MB/32MB/64MB ECC SDRAM Memory + +AcceleRAID 160 (AcceleRAID 170LP) + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RS RISC Processor + Built in 16M ECC SDRAM Memory + PCI Low Profile Form Factor - fit for 2U height + +eXtremeRAID 1100 (DAC1164P) + 3 Wide Ultra-2/LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup + +AcceleRAID 250 (DAC960PTL1) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 200 (DAC960PTL0) + Uses onboard Symbios SCSI chips on certain motherboards + Includes no onboard SCSI Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 150 (DAC960PRL) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 33MHz Intel i960RP RISC Processor + 4MB Parity EDO Memory + +DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels + 33MHz Intel i960RP RISC Processor + 4MB/8MB ECC EDO Memory + +DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PD 1/2/3 Wide Fast SCSI-2 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PL 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960P 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version +6.00-01 or above is required. + +For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. + +For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is +required. + +For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. + +For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version +3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware +version 2.73-0-00 or above is required (for single Flash ROM controllers) + +Please note that not all SCSI disk drives are suitable for use with DAC960 +controllers, and only particular firmware versions of any given model may +actually function correctly. Similarly, not all motherboards have a BIOS that +properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, +DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. +If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to +verify compatibility. Mylex makes available a hard disk compatibility list at +http://www.mylex.com/support/hdcomp/hd-lists.html. + + + DRIVER INSTALLATION + +This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. + +To install the DAC960 RAID driver, you may use the following commands, +replacing "/usr/src" with wherever you keep your Linux kernel source tree: + + cd /usr/src + tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) + mv README.DAC960 linux/Documentation + mv DAC960.[ch] linux/drivers/block + patch -p0 < DAC960.patch (if DAC960.patch is included) + cd linux + make config + make bzImage (or zImage) + +Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your +standard kernel, run lilo if appropriate, and reboot. + +To create the necessary devices in /dev, the "make_rd" script included in +"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. +LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive +are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with +statically linked executables of LILO and FDISK. This modified version of LILO +will allow booting from a DAC960 controller and/or mounting the root file +system from a DAC960. + +Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID +controllers. Installing directly onto a DAC960 may be problematic from other +Linux distributions until their installation utilities are updated. + + + INSTALLATION NOTES + +Before installing Linux or adding DAC960 logical drives to an existing Linux +system, the controller must first be configured to provide one or more logical +drives using the BIOS Configuration Utility or DACCF. Please note that since +there are only at most 6 usable partitions on each logical drive, systems +requiring more partitions should subdivide a drive group into multiple logical +drives, each of which can have up to 6 usable partitions. Also, note that with +large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) +rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do +will cause the logical drive geometry to have more than 65535 cylinders which +will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry +can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M +during the BIOS initialization sequence. + +For maximum performance and the most efficient E2FSCK performance, it is +recommended that EXT2 file systems be built with a 4KB block size and 16 block +stride to match the DAC960 controller's 64KB default stripe size. The command +"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a +large number of small files on the file systems, it is also beneficial to add +the "-i 16384" option to increase the bytes per inode parameter thereby +reducing the file system metadata. Finally, on systems that will only be run +with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks +with the "-s 1" option. + + + DAC960 ANNOUNCEMENTS MAILING LIST + +The DAC960 Announcements Mailing List provides a forum for informing Linux +users of new driver releases and other announcements regarding Linux support +for DAC960 PCI RAID Controllers. To join the mailing list, send a message to +"dac960-announce-request@dandelion.com" with the line "subscribe" in the +message body. + + + CONTROLLER CONFIGURATION AND STATUS MONITORING + +The DAC960 RAID controllers running firmware 4.06 or above include a Background +Initialization facility so that system downtime is minimized both for initial +installation and subsequent configuration of additional storage. The BIOS +Configuration Utility (accessible via Alt-R during the BIOS initialization +sequence) is used to quickly configure the controller, and then the logical +drives that have been created are available for immediate use even while they +are still being initialized by the controller. The primary need for online +configuration and status monitoring is then to avoid system downtime when disk +drives fail and must be replaced. Mylex's online monitoring and configuration +utilities are being ported to Linux and will become available at some point in +the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) +enclosure, the controller is able to rebuild failed drives automatically as +soon as a drive replacement is made available. + +The primary interfaces for controller configuration and status monitoring are +special files created in the /proc/rd/... hierarchy along with the normal +system console logging mechanism. Whenever the system is operating, the DAC960 +driver queries each controller for status information every 10 seconds, and +checks for additional conditions every 60 seconds. The initial status of each +controller is always available for controller N in /proc/rd/cN/initial_status, +and the current status as of the last status monitoring query is available in +/proc/rd/cN/current_status. In addition, status changes are also logged by the +driver to the system console and will appear in the log files maintained by +syslog. The progress of asynchronous rebuild or consistency check operations +is also available in /proc/rd/cN/current_status, and progress messages are +logged to the system console at most every 60 seconds. + +Starting with the 2.2.3/2.0.3 versions of the driver, the status information +available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been +augmented to include the vendor, model, revision, and serial number (if +available) for each physical device found connected to the controller: + +***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PRL PCI RAID Controller + Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB + PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned + PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + SAF-TE Enclosure Management Enabled + Physical Devices: + 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68016775HA + Disk Status: Online, 17928192 blocks + 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68004E53HA + Disk Status: Online, 17928192 blocks + 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13013935HA + Disk Status: Online, 17928192 blocks + 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13016897HA + Disk Status: Online, 17928192 blocks + 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68019905HA + Disk Status: Online, 17928192 blocks + 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68012753HA + Disk Status: Online, 17928192 blocks + 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +To simplify the monitoring process for custom software, the special file +/proc/rd/status returns "OK" when all DAC960 controllers in the system are +operating normally and no failures have occurred, or "ALERT" if any logical +drives are offline or critical or any non-standby physical drives are dead. + +Configuration commands for controller N are available via the special file +/proc/rd/cN/user_command. A human readable command can be written to this +special file to initiate a configuration operation, and the results of the +operation can then be read back from the special file in addition to being +logged to the system console. The shell command sequence + + echo "" > /proc/rd/c0/user_command + cat /proc/rd/c0/user_command + +is typically used to execute configuration commands. The configuration +commands are: + + flush-cache + + The "flush-cache" command flushes the controller's cache. The system + automatically flushes the cache at shutdown or if the driver module is + unloaded, so this command is only needed to be certain a write back cache + is flushed to disk before the system is powered off by a command to a UPS. + Note that the flush-cache command also stops an asynchronous rebuild or + consistency check, so it should not be used except when the system is being + halted. + + kill : + + The "kill" command marks the physical drive : as DEAD. + This command is provided primarily for testing, and should not be used + during normal system operation. + + make-online : + + The "make-online" command changes the physical drive : + from status DEAD to status ONLINE. In cases where multiple physical drives + have been killed simultaneously, this command may be used to bring all but + one of them back online, after which a rebuild to the final drive is + necessary. + + Warning: make-online should only be used on a dead physical drive that is + an active part of a drive group, never on a standby drive. The command + should never be used on a dead drive that is part of a critical logical + drive; rebuild should be used if only a single drive is dead. + + make-standby : + + The "make-standby" command changes physical drive : + from status DEAD to status STANDBY. It should only be used in cases where + a dead drive was replaced after an automatic rebuild was performed onto a + standby drive. It cannot be used to add a standby drive to the controller + configuration if one was not created initially; the BIOS Configuration + Utility must be used for that currently. + + rebuild : + + The "rebuild" command initiates an asynchronous rebuild onto physical drive + :. It should only be used when a dead drive has been + replaced. + + check-consistency + + The "check-consistency" command initiates an asynchronous consistency check + of with automatic restoration. It can be used + whenever it is desired to verify the consistency of the redundancy + information. + + cancel-rebuild + cancel-consistency-check + + The "cancel-rebuild" and "cancel-consistency-check" commands cancel any + rebuild or consistency check operations previously initiated. + + + EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group without a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:1 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages indicating that Logical +Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:1 is now DEAD +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +The Sense Keys logged here are just Check Condition / Unit Attention conditions +arising from a SCSI bus reset that is forced by the controller during its error +recovery procedures. Concurrently with the above, the driver status available +from /proc/rd also reflects the drive failure. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Dead, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +Since there are no standby drives configured, the system can continue to access +the logical drives in a performance degraded mode until the failed drive is +replaced and a rebuild operation completed to restore the redundancy of the +logical drives. Once Physical Drive 1:1 is replaced with a properly +functioning drive, or if the physical drive was killed without having failed +(e.g., due to electrical problems on the SCSI bus), the user can instruct the +controller to initiate a rebuild operation onto the newly replaced drive: + +gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Rebuild of Physical Drive 1:1 Initiated + +The echo command instructs the controller to initiate an asynchronous rebuild +operation onto Physical Drive 1:1, and the status message that results from the +operation is then available for reading from /proc/rd/c0/user_command, as well +as being logged to the console by the driver. + +Within 10 seconds of this command the driver logs the initiation of the +asynchronous rebuild operation: + +DAC960#0: Rebuild of Physical Drive 1:1 Initiated +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:1 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed + +and every minute a progress message is logged to the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:1 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + + + EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group with a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Standby, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:2 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages: + +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:2 is now DEAD +DAC960#0: Physical Drive 1:2 killed because it was removed +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +Since a standby drive is configured, the controller automatically begins +rebuilding onto the standby drive: + +DAC960#0: Physical Drive 1:3 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +Concurrently with the above, the driver status available from /proc/rd also +reflects the drive failure and automatic rebuild. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed + +and every minute a progress message is logged on the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:3 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +Note that the absence of a viable standby drive does not create an "ALERT" +status. Once dead Physical Drive 1:2 has been replaced, the controller must be +told that this has occurred and that the newly replaced drive should become the +new standby drive: + +gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Make Standby of Physical Drive 1:2 Succeeded + +The echo command instructs the controller to make Physical Drive 1:2 into a +standby drive, and the status message that results from the operation is then +available for reading from /proc/rd/c0/user_command, as well as being logged to +the console by the driver. Within 60 seconds of this command the driver logs: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:2 is now STANDBY +DAC960#0: Make Standby of Physical Drive 1:2 Succeeded + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Standby, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt new file mode 100644 index 0000000..89698e8 --- /dev/null +++ b/Documentation/blockdev/cciss.txt @@ -0,0 +1,171 @@ +This driver is for Compaq's SMART Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SA 5300 + * SA 5i + * SA 532 + * SA 5312 + * SA 641 + * SA 642 + * SA 6400 + * SA 6400 U320 Expansion Module + * SA 6i + * SA P600 + * SA P800 + * SA E400 + * SA P400i + * SA E200 + * SA E200i + * SA E500 + * SA P700m + * SA P212 + * SA P410 + * SA P410i + * SA P411 + * SA P812 + * SA P712m + * SA P711m + +Detecting drive failures: +------------------------- + +To get the status of logical volumes and to detect physical drive +failures, you can use the cciss_vol_status program found here: +http://cciss.sourceforge.net/#cciss_utils + +Device Naming: +-------------- + +If nodes are not already created in the /dev/cciss directory, run as root: + +# cd /dev +# ./MAKEDEV cciss + +You need some entries in /dev for the cciss device. The MAKEDEV script +can make device nodes for you automatically. Currently the device setup +is as follows: + +Major numbers: + 104 cciss0 + 105 cciss1 + 106 cciss2 + 105 cciss3 + 108 cciss4 + 109 cciss5 + 110 cciss6 + 111 cciss7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/cciss/c0d0 Controller 0, disk 0, whole device +/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 +/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 +/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/cciss/c1d1 Controller 1, disk 1, whole device +/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 +/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 +/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 + +SCSI tape drive and medium changer support +------------------------------------------ + +SCSI sequential access devices and medium changer devices are supported and +appropriate device nodes are automatically created. (e.g. +/dev/st0, /dev/st1, etc. See the "st" man page for more details.) +You must enable "SCSI tape drive support for Smart Array 5xxx" and +"SCSI support" in your kernel configuration to be able to use SCSI +tape drives with your Smart Array 5xxx controller. + +Additionally, note that the driver will not engage the SCSI core at init +time. The driver must be directed to dynamically engage the SCSI core via +the /proc filesystem entry which the "block" side of the driver creates as +/proc/driver/cciss/cciss* at runtime. This is because at driver init time, +the SCSI core may not yet be initialized (because the driver is a block +driver) and attempting to register it with the SCSI core in such a case +would cause a hang. This is best done via an initialization script +(typically in /etc/init.d, but could vary depending on distribution). +For example: + + for x in /proc/driver/cciss/cciss[0-9]* + do + echo "engage scsi" > $x + done + +Once the SCSI core is engaged by the driver, it cannot be disengaged +(except by unloading the driver, if it happens to be linked as a module.) + +Note also that if no sequential access devices or medium changers are +detected, the SCSI core will not be engaged by the action of the above +script. + +Hot plug support for SCSI tape drives +------------------------------------- + +Hot plugging of SCSI tape drives is supported, with some caveats. +The cciss driver must be informed that changes to the SCSI bus +have been made. This may be done via the /proc filesystem. +For example: + + echo "rescan" > /proc/scsi/cciss0/1 + +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the +driver to make note of any new or removed sequential access devices +or medium changers. The driver will output messages indicating what +devices have been added or removed and the controller, bus, target and +lun used to address the device. It then notifies the SCSI mid layer +of these changes. + +Note that the naming convention of the /proc filesystem entries +contains a number in addition to the driver name. (E.g. "cciss0" +instead of just "cciss" which you might expect.) + +Note: ONLY sequential access devices and medium changers are presented +as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, +physical SCSI disk drives are NOT presented to the SCSI mid layer. The +physical SCSI disk drives are controlled directly by the array controller +hardware and it is important to prevent the kernel from attempting to directly +access these devices too, as if the array controller were merely a SCSI +controller in the same way that we are allowing it to access SCSI tape drives. + +SCSI error handling for tape drives and medium changers +------------------------------------------------------- + +The linux SCSI mid layer provides an error handling protocol which +kicks into gear whenever a SCSI command fails to complete within a +certain amount of time (which can vary depending on the command). +The cciss driver participates in this protocol to some extent. The +normal protocol is a four step process. First the device is told +to abort the command. If that doesn't work, the device is reset. +If that doesn't work, the SCSI bus is reset. If that doesn't work +the host bus adapter is reset. Because the cciss driver is a block +driver as well as a SCSI driver and only the tape drives and medium +changers are presented to the SCSI mid layer, and unlike more +straightforward SCSI drivers, disk i/o continues through the block +side during the SCSI error recovery process, the cciss driver only +implements the first two of these actions, aborting the command, and +resetting the device. Additionally, most tape drives will not oblige +in aborting commands, and sometimes it appears they will not even +obey a reset command, though in most circumstances they will. In +the case that the command cannot be aborted and the device cannot be +reset, the device will be set offline. + +In the event the error handling code is triggered and a tape drive is +successfully reset or the tardy command is successfully aborted, the +tape drive may still not allow i/o to continue until some command +is issued which positions the tape to a known position. Typically you +must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) +before i/o can proceed again to a tape drive which was reset. + diff --git a/Documentation/blockdev/cpqarray.txt b/Documentation/blockdev/cpqarray.txt new file mode 100644 index 0000000..c7154e2 --- /dev/null +++ b/Documentation/blockdev/cpqarray.txt @@ -0,0 +1,93 @@ +This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SMART (EISA) + * SMART-2/E (EISA) + * SMART-2/P + * SMART-2DH + * SMART-2SL + * SMART-221 + * SMART-3100ES + * SMART-3200 + * Integrated Smart Array Controller + * SA 4200 + * SA 4250ES + * SA 431 + * RAID LC2 Controller + +It should also work with some really old Disk array adapters, but I am +unable to test against these cards: + + * IDA + * IDA-2 + * IAES + + +EISA Controllers: +----------------- + +If you want to use an EISA controller you'll have to supply some +modprobe/lilo parameters. If the driver is compiled into the kernel, must +give it the controller's IO port address at boot time (it is not +necessary to specify the IRQ). For example, if you had two SMART-2/E +controllers, in EISA slots 1 and 2 you'd give it a boot argument like +this: + + smart2=0x1000,0x2000 + +If you were loading the driver as a module, you'd give load it like this: + + modprobe cpqarray eisa=0x1000,0x2000 + +You can use EISA and PCI adapters at the same time. + + +Device Naming: +-------------- + +You need some entries in /dev for the ida device. MAKEDEV in the /dev +directory can make device nodes for you automatically. The device setup is +as follows: + +Major numbers: + 72 ida0 + 73 ida1 + 74 ida2 + 75 ida3 + 76 ida4 + 77 ida5 + 78 ida6 + 79 ida7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/ida/c0d0 Controller 0, disk 0, whole device +/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 +/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 +/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/ida/c1d1 Controller 1, disk 1, whole device +/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 +/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 +/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 + + +Changelog: +========== + +10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. + James Nelson + + +1999 : Original Document diff --git a/Documentation/blockdev/floppy.txt b/Documentation/blockdev/floppy.txt new file mode 100644 index 0000000..6ccab88 --- /dev/null +++ b/Documentation/blockdev/floppy.txt @@ -0,0 +1,245 @@ +This file describes the floppy driver. + +FAQ list: +========= + + A FAQ list may be found in the fdutils package (see below), and also +at . + + +LILO configuration options (Thinkpad users, read this) +====================================================== + + The floppy driver is configured using the 'floppy=' option in +lilo. This option can be typed at the boot prompt, or entered in the +lilo configuration file. + + Example: If your kernel is called linux-2.6.9, type the following line +at the lilo boot prompt (if you have a thinkpad): + + linux-2.6.9 floppy=thinkpad + +You may also enter the following line in /etc/lilo.conf, in the description +of linux-2.6.9: + + append = "floppy=thinkpad" + + Several floppy related options may be given, example: + + linux-2.6.9 floppy=daring floppy=two_fdc + append = "floppy=daring floppy=two_fdc" + + If you give options both in the lilo config file and on the boot +prompt, the option strings of both places are concatenated, the boot +prompt options coming last. That's why there are also options to +restore the default behavior. + + +Module configuration options +============================ + + If you use the floppy driver as a module, use the following syntax: +modprobe floppy + +Example: + modprobe floppy omnibook messages + + If you need certain options enabled every time you load the floppy driver, +you can put: + + options floppy omnibook messages + +in /etc/modprobe.conf. + + + The floppy driver related options are: + + floppy=asus_pci + Sets the bit mask to allow only units 0 and 1. (default) + + floppy=daring + Tells the floppy driver that you have a well behaved floppy controller. + This allows more efficient and smoother operation, but may fail on + certain controllers. This may speed up certain operations. + + floppy=0,daring + Tells the floppy driver that your floppy controller should be used + with caution. + + floppy=one_fdc + Tells the floppy driver that you have only one floppy controller. + (default) + + floppy=two_fdc + floppy=
,two_fdc + Tells the floppy driver that you have two floppy controllers. + The second floppy controller is assumed to be at
. + This option is not needed if the second controller is at address + 0x370, and if you use the 'cmos' option. + + floppy=thinkpad + Tells the floppy driver that you have a Thinkpad. Thinkpads use an + inverted convention for the disk change line. + + floppy=0,thinkpad + Tells the floppy driver that you don't have a Thinkpad. + + floppy=omnibook + floppy=nodma + Tells the floppy driver not to use Dma for data transfers. + This is needed on HP Omnibooks, which don't have a workable + DMA channel for the floppy driver. This option is also useful + if you frequently get "Unable to allocate DMA memory" messages. + Indeed, dma memory needs to be continuous in physical memory, + and is thus harder to find, whereas non-dma buffers may be + allocated in virtual memory. However, I advise against this if + you have an FDC without a FIFO (8272A or 82072). 82072A and + later are OK. You also need at least a 486 to use nodma. + If you use nodma mode, I suggest you also set the FIFO + threshold to 10 or lower, in order to limit the number of data + transfer interrupts. + + If you have a FIFO-able FDC, the floppy driver automatically + falls back on non DMA mode if no DMA-able memory can be found. + If you want to avoid this, explicitly ask for 'yesdma'. + + floppy=yesdma + Tells the floppy driver that a workable DMA channel is available. + (default) + + floppy=nofifo + Disables the FIFO entirely. This is needed if you get "Bus + master arbitration error" messages from your Ethernet card (or + from other devices) while accessing the floppy. + + floppy=usefifo + Enables the FIFO. (default) + + floppy=,fifo_depth + Sets the FIFO threshold. This is mostly relevant in DMA + mode. If this is higher, the floppy driver tolerates more + interrupt latency, but it triggers more interrupts (i.e. it + imposes more load on the rest of the system). If this is + lower, the interrupt latency should be lower too (faster + processor). The benefit of a lower threshold is less + interrupts. + + To tune the fifo threshold, switch on over/underrun messages + using 'floppycontrol --messages'. Then access a floppy + disk. If you get a huge amount of "Over/Underrun - retrying" + messages, then the fifo threshold is too low. Try with a + higher value, until you only get an occasional Over/Underrun. + It is a good idea to compile the floppy driver as a module + when doing this tuning. Indeed, it allows to try different + fifo values without rebooting the machine for each test. Note + that you need to do 'floppycontrol --messages' every time you + re-insert the module. + + Usually, tuning the fifo threshold should not be needed, as + the default (0xa) is reasonable. + + floppy=,,cmos + Sets the CMOS type of to . This is mandatory if + you have more than two floppy drives (only two can be + described in the physical CMOS), or if your BIOS uses + non-standard CMOS types. The CMOS types are: + + 0 - Use the value of the physical CMOS + 1 - 5 1/4 DD + 2 - 5 1/4 HD + 3 - 3 1/2 DD + 4 - 3 1/2 HD + 5 - 3 1/2 ED + 6 - 3 1/2 ED + 16 - unknown or not installed + + (Note: there are two valid types for ED drives. This is because 5 was + initially chosen to represent floppy *tapes*, and 6 for ED drives. + AMI ignored this, and used 5 for ED drives. That's why the floppy + driver handles both.) + + floppy=unexpected_interrupts + Print a warning message when an unexpected interrupt is received. + (default) + + floppy=no_unexpected_interrupts + floppy=L40SX + Don't print a message when an unexpected interrupt is received. This + is needed on IBM L40SX laptops in certain video modes. (There seems + to be an interaction between video and floppy. The unexpected + interrupts affect only performance, and can be safely ignored.) + + floppy=broken_dcl + Don't use the disk change line, but assume that the disk was + changed whenever the device node is reopened. Needed on some + boxes where the disk change line is broken or unsupported. + This should be regarded as a stopgap measure, indeed it makes + floppy operation less efficient due to unneeded cache + flushings, and slightly more unreliable. Please verify your + cable, connection and jumper settings if you have any DCL + problems. However, some older drives, and also some laptops + are known not to have a DCL. + + floppy=debug + Print debugging messages. + + floppy=messages + Print informational messages for some operations (disk change + notifications, warnings about over and underruns, and about + autodetection). + + floppy=silent_dcl_clear + Uses a less noisy way to clear the disk change line (which + doesn't involve seeks). Implied by 'daring' option. + + floppy=,irq + Sets the floppy IRQ to instead of 6. + + floppy=,dma + Sets the floppy DMA channel to instead of 2. + + floppy=slow + Use PS/2 stepping rate: + " PS/2 floppies have much slower step rates than regular floppies. + It's been recommended that take about 1/4 of the default speed + in some more extreme cases." + + +Supporting utilities and additional documentation: +================================================== + + Additional parameters of the floppy driver can be configured at +runtime. Utilities which do this can be found in the fdutils package. +This package also contains a new version of mtools which allows to +access high capacity disks (up to 1992K on a high density 3 1/2 disk!). +It also contains additional documentation about the floppy driver. + +The latest version can be found at fdutils homepage: + http://fdutils.linux.lu + +The fdutils releases can be found at: + http://fdutils.linux.lu/download.html + http://www.tux.org/pub/knaff/fdutils/ + ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ + +Reporting problems about the floppy driver +========================================== + + If you have a question or a bug report about the floppy driver, mail +me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use +comp.os.linux.hardware. As the volume in these groups is rather high, +be sure to include the word "floppy" (or "FLOPPY") in the subject +line. If the reported problem happens when mounting floppy disks, be +sure to mention also the type of the filesystem in the subject line. + + Be sure to read the FAQ before mailing/posting any bug reports! + + Alain + +Changelog +========= + +10-30-2004 : Cleanup, updating, add reference to module configuration. + James Nelson + +6-3-2000 : Original Document diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt new file mode 100644 index 0000000..aeb93ff --- /dev/null +++ b/Documentation/blockdev/nbd.txt @@ -0,0 +1,47 @@ + Network Block Device (TCP version) + + What is it: With this compiled in the kernel (or as a module), Linux + can use a remote server as one of its block devices. So every time + the client computer wants to read, e.g., /dev/nb0, it sends a + request over TCP to the server, which will reply with the data read. + This can be used for stations with low disk space (or even diskless - + if you boot from floppy) to borrow disk space from another computer. + Unlike NFS, it is possible to put any filesystem on it, etc. It should + even be possible to use NBD as a root filesystem (I've never tried), + but it requires a user-level program to be in the initrd to start. + It also allows you to run block-device in user land (making server + and client physically the same computer, communicating using loopback). + + Current state: It currently works. Network block device is stable. + I originally thought that it was impossible to swap over TCP. It + turned out not to be true - swapping over TCP now works and seems + to be deadlock-free, but it requires heavy patches into Linux's + network layer. + + For more information, or to download the nbd-client and nbd-server + tools, go to http://nbd.sf.net/. + + Howto: To setup nbd, you can simply do the following: + + First, serve a device or file from a remote server: + + nbd-server + + e.g., + root@server1 # nbd-server 1234 /dev/sdb1 + + (serves sdb1 partition on TCP port 1234) + + Then, on the local (client) system: + + nbd-client /dev/nb[0-n] + + e.g., + root@client1 # nbd-client server1 1234 /dev/nb0 + + (creates the nb0 device on client1) + + The nbd kernel module need only be installed on the client + system, as the nbd-server is completely in userspace. In fact, + the nbd-server has been successfully ported to other operating + systems, including Windows. diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt new file mode 100644 index 0000000..e431267 --- /dev/null +++ b/Documentation/blockdev/paride.txt @@ -0,0 +1,417 @@ + + Linux and parallel port IDE devices + +PARIDE v1.03 (c) 1997-8 Grant Guenther + +1. Introduction + +Owing to the simplicity and near universality of the parallel port interface +to personal computers, many external devices such as portable hard-disk, +CD-ROM, LS-120 and tape drives use the parallel port to connect to their +host computer. While some devices (notably scanners) use ad-hoc methods +to pass commands and data through the parallel port interface, most +external devices are actually identical to an internal model, but with +a parallel-port adapter chip added in. Some of the original parallel port +adapters were little more than mechanisms for multiplexing a SCSI bus. +(The Iomega PPA-3 adapter used in the ZIP drives is an example of this +approach). Most current designs, however, take a different approach. +The adapter chip reproduces a small ISA or IDE bus in the external device +and the communication protocol provides operations for reading and writing +device registers, as well as data block transfer functions. Sometimes, +the device being addressed via the parallel cable is a standard SCSI +controller like an NCR 5380. The "ditto" family of external tape +drives use the ISA replicator to interface a floppy disk controller, +which is then connected to a floppy-tape mechanism. The vast majority +of external parallel port devices, however, are now based on standard +IDE type devices, which require no intermediate controller. If one +were to open up a parallel port CD-ROM drive, for instance, one would +find a standard ATAPI CD-ROM drive, a power supply, and a single adapter +that interconnected a standard PC parallel port cable and a standard +IDE cable. It is usually possible to exchange the CD-ROM device with +any other device using the IDE interface. + +The document describes the support in Linux for parallel port IDE +devices. It does not cover parallel port SCSI devices, "ditto" tape +drives or scanners. Many different devices are supported by the +parallel port IDE subsystem, including: + + MicroSolutions backpack CD-ROM + MicroSolutions backpack PD/CD + MicroSolutions backpack hard-drives + MicroSolutions backpack 8000t tape drive + SyQuest EZ-135, EZ-230 & SparQ drives + Avatar Shark + Imation Superdisk LS-120 + Maxell Superdisk LS-120 + FreeCom Power CD + Hewlett-Packard 5GB and 8GB tape drives + Hewlett-Packard 7100 and 7200 CD-RW drives + +as well as most of the clone and no-name products on the market. + +To support such a wide range of devices, PARIDE, the parallel port IDE +subsystem, is actually structured in three parts. There is a base +paride module which provides a registry and some common methods for +accessing the parallel ports. The second component is a set of +high-level drivers for each of the different types of supported devices: + + pd IDE disk + pcd ATAPI CD-ROM + pf ATAPI disk + pt ATAPI tape + pg ATAPI generic + +(Currently, the pg driver is only used with CD-R drives). + +The high-level drivers function according to the relevant standards. +The third component of PARIDE is a set of low-level protocol drivers +for each of the parallel port IDE adapter chips. Thanks to the interest +and encouragement of Linux users from many parts of the world, +support is available for almost all known adapter protocols: + + aten ATEN EH-100 (HK) + bpck Microsolutions backpack (US) + comm DataStor (old-type) "commuter" adapter (TW) + dstr DataStor EP-2000 (TW) + epat Shuttle EPAT (UK) + epia Shuttle EPIA (UK) + fit2 FIT TD-2000 (US) + fit3 FIT TD-3000 (US) + friq Freecom IQ cable (DE) + frpw Freecom Power (DE) + kbic KingByte KBIC-951A and KBIC-971A (TW) + ktti KT Technology PHd adapter (SG) + on20 OnSpec 90c20 (US) + on26 OnSpec 90c26 (US) + + +2. Using the PARIDE subsystem + +While configuring the Linux kernel, you may choose either to build +the PARIDE drivers into your kernel, or to build them as modules. + +In either case, you will need to select "Parallel port IDE device support" +as well as at least one of the high-level drivers and at least one +of the parallel port communication protocols. If you do not know +what kind of parallel port adapter is used in your drive, you could +begin by checking the file names and any text files on your DOS +installation floppy. Alternatively, you can look at the markings on +the adapter chip itself. That's usually sufficient to identify the +correct device. + +You can actually select all the protocol modules, and allow the PARIDE +subsystem to try them all for you. + +For the "brand-name" products listed above, here are the protocol +and high-level drivers that you would use: + + Manufacturer Model Driver Protocol + + MicroSolutions CD-ROM pcd bpck + MicroSolutions PD drive pf bpck + MicroSolutions hard-drive pd bpck + MicroSolutions 8000t tape pt bpck + SyQuest EZ, SparQ pd epat + Imation Superdisk pf epat + Maxell Superdisk pf friq + Avatar Shark pd epat + FreeCom CD-ROM pcd frpw + Hewlett-Packard 5GB Tape pt epat + Hewlett-Packard 7200e (CD) pcd epat + Hewlett-Packard 7200e (CD-R) pg epat + +2.1 Configuring built-in drivers + +We recommend that you get to know how the drivers work and how to +configure them as loadable modules, before attempting to compile a +kernel with the drivers built-in. + +If you built all of your PARIDE support directly into your kernel, +and you have just a single parallel port IDE device, your kernel should +locate it automatically for you. If you have more than one device, +you may need to give some command line options to your bootloader +(eg: LILO), how to do that is beyond the scope of this document. + +The high-level drivers accept a number of command line parameters, all +of which are documented in the source files in linux/drivers/block/paride. +By default, each driver will automatically try all parallel ports it +can find, and all protocol types that have been installed, until it finds +a parallel port IDE adapter. Once it finds one, the probe stops. So, +if you have more than one device, you will need to tell the drivers +how to identify them. This requires specifying the port address, the +protocol identification number and, for some devices, the drive's +chain ID. While your system is booting, a number of messages are +displayed on the console. Like all such messages, they can be +reviewed with the 'dmesg' command. Among those messages will be +some lines like: + + paride: bpck registered as protocol 0 + paride: epat registered as protocol 1 + +The numbers will always be the same until you build a new kernel with +different protocol selections. You should note these numbers as you +will need them to identify the devices. + +If you happen to be using a MicroSolutions backpack device, you will +also need to know the unit ID number for each drive. This is usually +the last two digits of the drive's serial number (but read MicroSolutions' +documentation about this). + +As an example, let's assume that you have a MicroSolutions PD/CD drive +with unit ID number 36 connected to the parallel port at 0x378, a SyQuest +EZ-135 connected to the chained port on the PD/CD drive and also an +Imation Superdisk connected to port 0x278. You could give the following +options on your boot command: + + pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 + +In the last option, pf.drive1 configures device /dev/pf1, the 0x378 +is the parallel port base address, the 0 is the protocol registration +number and 36 is the chain ID. + +Please note: while PARIDE will work both with and without the +PARPORT parallel port sharing system that is included by the +"Parallel port support" option, PARPORT must be included and enabled +if you want to use chains of devices on the same parallel port. + +2.2 Loading and configuring PARIDE as modules + +It is much faster and simpler to get to understand the PARIDE drivers +if you use them as loadable kernel modules. + +Note 1: using these drivers with the "kerneld" automatic module loading +system is not recommended for beginners, and is not documented here. + +Note 2: if you build PARPORT support as a loadable module, PARIDE must +also be built as loadable modules, and PARPORT must be loaded before the +PARIDE modules. + +To use PARIDE, you must begin by + + insmod paride + +this loads a base module which provides a registry for the protocols, +among other tasks. + +Then, load as many of the protocol modules as you think you might need. +As you load each module, it will register the protocols that it supports, +and print a log message to your kernel log file and your console. For +example: + + # insmod epat + paride: epat registered as protocol 0 + # insmod kbic + paride: k951 registered as protocol 1 + paride: k971 registered as protocol 2 + +Finally, you can load high-level drivers for each kind of device that +you have connected. By default, each driver will autoprobe for a single +device, but you can support up to four similar devices by giving their +individual co-ordinates when you load the driver. + +For example, if you had two no-name CD-ROM drives both using the +KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc +you could give the following command: + + # insmod pcd drive0=0x378,1 drive1=0x3bc,1 + +For most adapters, giving a port address and protocol number is sufficient, +but check the source files in linux/drivers/block/paride for more +information. (Hopefully someone will write some man pages one day !). + +As another example, here's what happens when PARPORT is installed, and +a SyQuest EZ-135 is attached to port 0x378: + + # insmod paride + paride: version 1.0 installed + # insmod epat + paride: epat registered as protocol 0 + # insmod pd + pd: pd version 1.0, major 45, cluster 64, nice 0 + pda: Sharing parport1 at 0x378 + pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 + pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media + pda: pda1 + +Note that the last line is the output from the generic partition table +scanner - in this case it reports that it has found a disk with one partition. + +2.3 Using a PARIDE device + +Once the drivers have been loaded, you can access PARIDE devices in the +same way as their traditional counterparts. You will probably need to +create the device "special files". Here is a simple script that you can +cut to a file and execute: + +#!/bin/bash +# +# mkd -- a script to create the device special files for the PARIDE subsystem +# +function mkdev { + mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 +} +# +function pd { + D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) + mkdev pd$D b 45 $[ $1 * 16 ] + for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] + done +} +# +cd /dev +# +for u in 0 1 2 3 ; do pd $u ; done +for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done +for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done +for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done +for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done +for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done +# +# end of mkd + +With the device files and drivers in place, you can access PARIDE devices +like any other Linux device. For example, to mount a CD-ROM in pcd0, use: + + mount /dev/pcd0 /cdrom + +If you have a fresh Avatar Shark cartridge, and the drive is pda, you +might do something like: + + fdisk /dev/pda -- make a new partition table with + partition 1 of type 83 + + mke2fs /dev/pda1 -- to build the file system + + mkdir /shark -- make a place to mount the disk + + mount /dev/pda1 /shark + +Devices like the Imation superdisk work in the same way, except that +they do not have a partition table. For example to make a 120MB +floppy that you could share with a DOS system: + + mkdosfs /dev/pf0 + mount /dev/pf0 /mnt + + +2.4 The pf driver + +The pf driver is intended for use with parallel port ATAPI disk +devices. The most common devices in this category are PD drives +and LS-120 drives. Traditionally, media for these devices are not +partitioned. Consequently, the pf driver does not support partitioned +media. This may be changed in a future version of the driver. + +2.5 Using the pt driver + +The pt driver for parallel port ATAPI tape drives is a minimal driver. +It does not yet support many of the standard tape ioctl operations. +For best performance, a block size of 32KB should be used. You will +probably want to set the parallel port delay to 0, if you can. + +2.6 Using the pg driver + +The pg driver can be used in conjunction with the cdrecord program +to create CD-ROMs. Please get cdrecord version 1.6.1 or later +from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media +your parallel port should ideally be set to EPP mode, and the "port delay" +should be set to 0. With those settings it is possible to record at 2x +speed without any buffer underruns. If you cannot get the driver to work +in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. + + +3. Troubleshooting + +3.1 Use EPP mode if you can + +The most common problems that people report with the PARIDE drivers +concern the parallel port CMOS settings. At this time, none of the +PARIDE protocol modules support ECP mode, or any ECP combination modes. +If you are able to do so, please set your parallel port into EPP mode +using your CMOS setup procedure. + +3.2 Check the port delay + +Some parallel ports cannot reliably transfer data at full speed. To +offset the errors, the PARIDE protocol modules introduce a "port +delay" between each access to the i/o ports. Each protocol sets +a default value for this delay. In most cases, the user can override +the default and set it to 0 - resulting in somewhat higher transfer +rates. In some rare cases (especially with older 486 systems) the +default delays are not long enough. if you experience corrupt data +transfers, or unexpected failures, you may wish to increase the +port delay. The delay can be programmed using the "driveN" parameters +to each of the high-level drivers. Please see the notes above, or +read the comments at the beginning of the driver source files in +linux/drivers/block/paride. + +3.3 Some drives need a printer reset + +There appear to be a number of "noname" external drives on the market +that do not always power up correctly. We have noticed this with some +drives based on OnSpec and older Freecom adapters. In these rare cases, +the adapter can often be reinitialised by issuing a "printer reset" on +the parallel port. As the reset operation is potentially disruptive in +multiple device environments, the PARIDE drivers will not do it +automatically. You can however, force a printer reset by doing: + + insmod lp reset=1 + rmmod lp + +If you have one of these marginal cases, you should probably build +your paride drivers as modules, and arrange to do the printer reset +before loading the PARIDE drivers. + +3.4 Use the verbose option and dmesg if you need help + +While a lot of testing has gone into these drivers to make them work +as smoothly as possible, problems will arise. If you do have problems, +please check all the obvious things first: does the drive work in +DOS with the manufacturer's drivers ? If that doesn't yield any useful +clues, then please make sure that only one drive is hooked to your system, +and that either (a) PARPORT is enabled or (b) no other device driver +is using your parallel port (check in /proc/ioports). Then, load the +appropriate drivers (you can load several protocol modules if you want) +as in: + + # insmod paride + # insmod epat + # insmod bpck + # insmod kbic + ... + # insmod pd verbose=1 + +(using the correct driver for the type of device you have, of course). +The verbose=1 parameter will cause the drivers to log a trace of their +activity as they attempt to locate your drive. + +Use 'dmesg' to capture a log of all the PARIDE messages (any messages +beginning with paride:, a protocol module's name or a driver's name) and +include that with your bug report. You can submit a bug report in one +of two ways. Either send it directly to the author of the PARIDE suite, +by e-mail to grant@torque.net, or join the linux-parport mailing list +and post your report there. + +3.5 For more information or help + +You can join the linux-parport mailing list by sending a mail message +to + linux-parport-request@torque.net + +with the single word + + subscribe + +in the body of the mail message (not in the subject line). Please be +sure that your mail program is correctly set up when you do this, as +the list manager is a robot that will subscribe you using the reply +address in your mail headers. REMOVE any anti-spam gimmicks you may +have in your mail headers, when sending mail to the list server. + +You might also find some useful information on the linux-parport +web pages (although they are not always up to date) at + + http://www.torque.net/parport/ + + diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt new file mode 100644 index 0000000..6c820ba --- /dev/null +++ b/Documentation/blockdev/ramdisk.txt @@ -0,0 +1,165 @@ +Using the RAM disk block device with Linux +------------------------------------------ + +Contents: + + 1) Overview + 2) Kernel Command Line Parameters + 3) Using "rdev -r" + 4) An Example of Creating a Compressed RAM Disk + + +1) Overview +----------- + +The RAM disk driver is a way to use main system memory as a block device. It +is required for initrd, an initial filesystem used if you need to load modules +in order to access the root filesystem (see Documentation/initrd.txt). It can +also be used for a temporary filesystem for crypto work, since the contents +are erased on reboot. + +The RAM disk dynamically grows as more space is required. It does this by using +RAM from the buffer cache. The driver marks the buffers it is using as dirty +so that the VM subsystem does not try to reclaim them later. + +The RAM disk supports up to 16 RAM disks by default, and can be reconfigured +to support an unlimited number of RAM disks (at your own risk). Just change +the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu +and (re)build the kernel. + +To use RAM disk support with your system, run './MAKEDEV ram' from the /dev +directory. RAM disks are all major number 1, and start with minor number 0 +for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. + +The new RAM disk also has the ability to load compressed RAM disk images, +allowing one to squeeze more programs onto an average installation or +rescue floppy disk. + + +2) Kernel Command Line Parameters +--------------------------------- + + ramdisk_size=N + ============== + +This parameter tells the RAM disk driver to set up RAM disks of N k size. The +default is 4096 (4 MB) (8192 (8 MB) on S390). + + ramdisk_blocksize=N + =================== + +This parameter tells the RAM disk driver how many bytes to use per block. The +default is 1024 (BLOCK_SIZE). + + +3) Using "rdev -r" +------------------ + +The usage of the word (two bytes) that "rdev -r" sets in the kernel image is +as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up +to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit +14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a +prompt/wait sequence is to be given before trying to read the RAM disk. Since +the RAM disk dynamically grows as data is being written into it, a size field +is not required. Bits 11 to 13 are not currently used and may as well be zero. +These numbers are no magical secrets, as seen below: + +./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF +./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 +./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 + +Consider a typical two floppy disk setup, where you will have the +kernel on disk one, and have already put a RAM disk image onto disk #2. + +Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk +starts at an offset of 0 kB from the beginning of the floppy. +The command line equivalent is: "ramdisk_start=0" + +You want bit 14 as one, indicating that a RAM disk is to be loaded. +The command line equivalent is: "load_ramdisk=1" + +You want bit 15 as one, indicating that you want a prompt/keypress +sequence so that you have a chance to switch floppy disks. +The command line equivalent is: "prompt_ramdisk=1" + +Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. +So to create disk one of the set, you would do: + + /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 + /usr/src/linux# rdev /dev/fd0 /dev/fd0 + /usr/src/linux# rdev -r /dev/fd0 49152 + +If you make a boot disk that has LILO, then for the above, you would use: + append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" +Since the default start = 0 and the default prompt = 1, you could use: + append = "load_ramdisk=1" + + +4) An Example of Creating a Compressed RAM Disk +---------------------------------------------- + +To create a RAM disk image, you will need a spare block device to +construct it on. This can be the RAM disk device itself, or an +unused disk partition (such as an unmounted swap partition). For this +example, we will use the RAM disk device, "/dev/ram0". + +Note: This technique should not be done on a machine with less than 8 MB +of RAM. If using a spare disk partition instead of /dev/ram0, then this +restriction does not apply. + +a) Decide on the RAM disk size that you want. Say 2 MB for this example. + Create it by writing to the RAM disk device. (This step is not currently + required, but may be in the future.) It is wise to zero out the + area (esp. for disks) so that maximal compression is achieved for + the unused blocks of the image that you are about to create. + + dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 + +b) Make a filesystem on it. Say ext2fs for this example. + + mke2fs -vm0 /dev/ram0 2048 + +c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) + and unmount it again. + +d) Compress the contents of the RAM disk. The level of compression + will be approximately 50% of the space used by the files. Unused + space on the RAM disk will compress to almost nothing. + + dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz + +e) Put the kernel onto the floppy + + dd if=zImage of=/dev/fd0 bs=1k + +f) Put the RAM disk image onto the floppy, after the kernel. Use an offset + that is slightly larger than the kernel, so that you can put another + (possibly larger) kernel onto the same floppy later without overlapping + the RAM disk image. An offset of 400 kB for kernels about 350 kB in + size would be reasonable. Make sure offset+size of ram_image.gz is + not larger than the total space on your floppy (usually 1440 kB). + + dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 + +g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. + For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would + have 2^15 + 2^14 + 400 = 49552. + + rdev /dev/fd0 /dev/fd0 + rdev -r /dev/fd0 49552 + +That is it. You now have your boot/root compressed RAM disk floppy. Some +users may wish to combine steps (d) and (f) by using a pipe. + +-------------------------------------------------------------------------- + Paul Gortmaker 12/95 + +Changelog: +---------- + +10-22-04 : Updated to reflect changes in command line options, remove + obsolete references, general cleanup. + James Nelson (james4765@gmail.com) + + +12-95 : Original Document diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt deleted file mode 100644 index 89698e8..0000000 --- a/Documentation/cciss.txt +++ /dev/null @@ -1,171 +0,0 @@ -This driver is for Compaq's SMART Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SA 5300 - * SA 5i - * SA 532 - * SA 5312 - * SA 641 - * SA 642 - * SA 6400 - * SA 6400 U320 Expansion Module - * SA 6i - * SA P600 - * SA P800 - * SA E400 - * SA P400i - * SA E200 - * SA E200i - * SA E500 - * SA P700m - * SA P212 - * SA P410 - * SA P410i - * SA P411 - * SA P812 - * SA P712m - * SA P711m - -Detecting drive failures: -------------------------- - -To get the status of logical volumes and to detect physical drive -failures, you can use the cciss_vol_status program found here: -http://cciss.sourceforge.net/#cciss_utils - -Device Naming: --------------- - -If nodes are not already created in the /dev/cciss directory, run as root: - -# cd /dev -# ./MAKEDEV cciss - -You need some entries in /dev for the cciss device. The MAKEDEV script -can make device nodes for you automatically. Currently the device setup -is as follows: - -Major numbers: - 104 cciss0 - 105 cciss1 - 106 cciss2 - 105 cciss3 - 108 cciss4 - 109 cciss5 - 110 cciss6 - 111 cciss7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 - -SCSI tape drive and medium changer support ------------------------------------------- - -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created. (e.g. -/dev/st0, /dev/st1, etc. See the "st" man page for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. - -Additionally, note that the driver will not engage the SCSI core at init -time. The driver must be directed to dynamically engage the SCSI core via -the /proc filesystem entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distribution). -For example: - - for x in /proc/driver/cciss/cciss[0-9]* - do - echo "engage scsi" > $x - done - -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) - -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. - -Hot plug support for SCSI tape drives -------------------------------------- - -Hot plugging of SCSI tape drives is supported, with some caveats. -The cciss driver must be informed that changes to the SCSI bus -have been made. This may be done via the /proc filesystem. -For example: - - echo "rescan" > /proc/scsi/cciss0/1 - -This causes the driver to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the -driver to make note of any new or removed sequential access devices -or medium changers. The driver will output messages indicating what -devices have been added or removed and the controller, bus, target and -lun used to address the device. It then notifies the SCSI mid layer -of these changes. - -Note that the naming convention of the /proc filesystem entries -contains a number in addition to the driver name. (E.g. "cciss0" -instead of just "cciss" which you might expect.) - -Note: ONLY sequential access devices and medium changers are presented -as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, -physical SCSI disk drives are NOT presented to the SCSI mid layer. The -physical SCSI disk drives are controlled directly by the array controller -hardware and it is important to prevent the kernel from attempting to directly -access these devices too, as if the array controller were merely a SCSI -controller in the same way that we are allowing it to access SCSI tape drives. - -SCSI error handling for tape drives and medium changers -------------------------------------------------------- - -The linux SCSI mid layer provides an error handling protocol which -kicks into gear whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The cciss driver participates in this protocol to some extent. The -normal protocol is a four step process. First the device is told -to abort the command. If that doesn't work, the device is reset. -If that doesn't work, the SCSI bus is reset. If that doesn't work -the host bus adapter is reset. Because the cciss driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI mid layer, and unlike more -straightforward SCSI drivers, disk i/o continues through the block -side during the SCSI error recovery process, the cciss driver only -implements the first two of these actions, aborting the command, and -resetting the device. Additionally, most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. In -the case that the command cannot be aborted and the device cannot be -reset, the device will be set offline. - -In the event the error handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow i/o to continue until some command -is issued which positions the tape to a known position. Typically you -must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) -before i/o can proceed again to a tape drive which was reset. - diff --git a/Documentation/computone.txt b/Documentation/computone.txt deleted file mode 100644 index 5e2a0c7..0000000 --- a/Documentation/computone.txt +++ /dev/null @@ -1,522 +0,0 @@ -NOTE: This is an unmaintained driver. It is not guaranteed to work due to -changes made in the tty layer in 2.6. If you wish to take over maintenance of -this driver, contact Michael Warfield . - -Changelog: ----------- -11-01-2001: Original Document - -10-29-2004: Minor misspelling & format fix, update status of driver. - James Nelson - -Computone Intelliport II/Plus Multiport Serial Driver ------------------------------------------------------ - -Release Notes For Linux Kernel 2.2 and higher. -These notes are for the drivers which have already been integrated into the -kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. - -Version: 1.2.14 -Date: 11/01/2001 -Historical Author: Andrew Manison -Primary Author: Doug McNash -Support: support@computone.com -Fixes and Updates: Mike Warfield - -This file assumes that you are using the Computone drivers which are -integrated into the kernel sources. For updating the drivers or installing -drivers into kernels which do not already have Computone drivers, please -refer to the instructions in the README.computone file in the driver patch. - - -1. INTRODUCTION - -This driver supports the entire family of Intelliport II/Plus controllers -with the exception of the MicroChannel controllers. It does not support -products previous to the Intelliport II. - -This driver was developed on the v2.0.x Linux tree and has been tested up -to v2.4.14; it will probably not work with earlier v1.X kernels,. - - -2. QUICK INSTALLATION - -Hardware - If you have an ISA card, find a free interrupt and io port. - List those in use with `cat /proc/interrupts` and - `cat /proc/ioports`. Set the card dip switches to a free - address. You may need to configure your BIOS to reserve an - irq for an ISA card. PCI and EISA parameters are set - automagically. Insert card into computer with the power off - before or after drivers installation. - - Note the hardware address from the Computone ISA cards installed into - the system. These are required for editing ip2.c or editing - /etc/modprobe.conf, or for specification on the modprobe - command line. - - Note that the /etc/modules.conf should be used for older (pre-2.6) - kernels. - -Software - - -Module installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (m) module for CONFIG_COMPUTONE under character - devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c if needed - or - edit /etc/modprobe.conf if needed (module). - or both to match this setting. -d) Run "make modules" -e) Run "make modules_install" -f) Run "/sbin/depmod -a" -g) install driver using `modprobe ip2 ` (options listed below) -h) run ip2mkdev (either the script below or the binary version) - - -Kernel installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (y) kernel for CONFIG_COMPUTONE under character - devices. CONFIG_PCI may need to be set if you have PCI bus. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c - (Optional - may be specified on kernel command line now) -d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. -f) Add new config for this kernel into /etc/lilo.conf, run "lilo" - or copy to a floppy disk and boot from that floppy disk. -g) Reboot using this kernel -h) run ip2mkdev (either the script below or the binary version) - -Kernel command line options: - -When compiling the driver into the kernel, io and irq may be -compiled into the driver by editing ip2.c and setting the values for -io and irq in the appropriate array. An alternative is to specify -a command line parameter to the kernel at boot up. - - ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - -Note that this order is very different from the specifications for the -modload parameters which have separate IRQ and IO specifiers. - -The io port also selects PCI (1) and EISA (2) boards. - - io=0 No board - io=1 PCI board - io=2 EISA board - else ISA board io address - -You only need to specify the boards which are present. - - Examples: - - 2 PCI boards: - - ip2=1,0,1,0 - - 1 ISA board at 0x310 irq 5: - - ip2=0x310,5 - -This can be added to and "append" option in lilo.conf similar to this: - - append="ip2=1,0,1,0" - - -3. INSTALLATION - -Previously, the driver sources were packaged with a set of patch files -to update the character drivers' makefile and configuration file, and other -kernel source files. A build script (ip2build) was included which applies -the patches if needed, and build any utilities needed. -What you receive may be a single patch file in conventional kernel -patch format build script. That form can also be applied by -running patch -p1 < ThePatchFile. Otherwise run ip2build. - -The driver can be installed as a module (recommended) or built into the -kernel. This is selected as for other drivers through the `make config` -command from the root of the Linux source tree. If the driver is built -into the kernel you will need to edit the file ip2.c to match the boards -you are installing. See that file for instructions. If the driver is -installed as a module the configuration can also be specified on the -modprobe command line as follows: - - modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 - -where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, -12,15) and addr1-4 are the base addresses for up to four controllers. If -the irqs are not specified the driver uses the default in ip2.c (which -selects polled mode). If no base addresses are specified the defaults in -ip2.c are used. If you are autoloading the driver module with kerneld or -kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.conf or both. -The options line is equivalent to the command line and takes precedence over -what is in ip2.c. - -/etc/modprobe.conf sample: - options ip2 io=1,0x328 irq=1,10 - alias char-major-71 ip2 - alias char-major-72 ip2 - alias char-major-73 ip2 - -The equivalent in ip2.c: - -static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; - -The equivalent for the kernel command line (in lilo.conf): - - append="ip2=1,1,0x328,10" - - -Note: Both io and irq should be updated to reflect YOUR system. An "io" - address of 1 or 2 indicates a PCI or EISA card in the board table. - The PCI or EISA irq will be assigned automatically. - -Specifying an invalid or in-use irq will default the driver into -running in polled mode for that card. If all irq entries are 0 then -all cards will operate in polled mode. - -If you select the driver as part of the kernel run : - - make zlilo (or whatever you do to create a bootable kernel) - -If you selected a module run : - - make modules && make modules_install - -The utility ip2mkdev (see 5 and 7 below) creates all the device nodes -required by the driver. For a device to be created it must be configured -in the driver and the board must be installed. Only devices corresponding -to real IntelliPort II ports are created. With multiple boards and expansion -boxes this will leave gaps in the sequence of device names. ip2mkdev uses -Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and -cuf0 - cuf255 for callout devices. - - -4. USING THE DRIVERS - -As noted above, the driver implements the ports in accordance with Linux -conventions, and the devices should be interchangeable with the standard -serial devices. (This is a key point for problem reporting: please make -sure that what you are trying do works on the ttySx/cuax ports first; then -tell us what went wrong with the ip2 ports!) - -Higher speeds can be obtained using the setserial utility which remaps -38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. -Intelliport II installations using the PowerPort expansion module can -use the custom speed setting to select the highest speeds: 153,600 bps, -230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for -custom baud rate configuration is fixed at 921,600 for cards/expansion -modules with ST654's and 115200 for those with Cirrus CD1400's. This -corresponds to the maximum bit rates those chips are capable. -For example if the baud base is 921600 and the baud divisor is 18 then -the custom rate is 921600/18 = 51200 bps. See the setserial man page for -complete details. Of course if stty accepts the higher rates now you can -use that as well as the standard ioctls(). - - -5. ip2mkdev and assorted utilities... - -Several utilities, including the source for a binary ip2mkdev utility are -available under .../drivers/char/ip2. These can be build by changing to -that directory and typing "make" after the kernel has be built. If you do -not wish to compile the binary utilities, the shell script below can be -cut out and run as "ip2mkdev" to create the necessary device files. To -use the ip2mkdev script, you must have procfs enabled and the proc file -system mounted on /proc. - - -6. NOTES - -This is a release version of the driver, but it is impossible to test it -in all configurations of Linux. If there is any anomalous behaviour that -does not match the standard serial port's behaviour please let us know. - - -7. ip2mkdev shell script - -Previously, this script was simply attached here. It is now attached as a -shar archive to make it easier to extract the script from the documentation. -To create the ip2mkdev shell script change to a convenient directory (/tmp -works just fine) and run the following command: - - unshar Documentation/computone.txt - (This file) - -You should now have a file ip2mkdev in your current working directory with -permissions set to execute. Running that script with then create the -necessary devices for the Computone boards, interfaces, and ports which -are present on you system at the time it is run. - - -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2.1). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 2001-10-29 10:32 EST by . -# Source directory was `/home2/src/tmp'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 4251 -rwxr-xr-x ip2mkdev -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then - shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' -elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' -elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$2 "$8"' -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch -# -if mkdir _sh17581; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= ip2mkdev ============== -if test -f 'ip2mkdev' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' -else - $echo 'x -' extracting 'ip2mkdev' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && -#!/bin/sh - -# -# ip2mkdev -# -# Make or remove devices as needed for Computone Intelliport drivers -# -# First rule! If the dev file exists and you need it, don't mess -# with it. That prevents us from screwing up open ttys, ownership -# and permissions on a running system! -# -# This script will NOT remove devices that no longer exist if their -# board or interface box has been removed. If you want to get rid -# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" -# before running this script. Running this script will then recreate -# all the valid devices. -# -# Michael H. Warfield -# /\/\|=mhw=|\/\/ -# mhw@wittsend.com -# -# Updated 10/29/2000 for version 1.2.13 naming convention -# under devfs. /\/\|=mhw=|\/\/ -# -# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ -# -X -if test -d /dev/ip2 ; then -# This is devfs mode... We don't do anything except create symlinks -# from the real devices to the old names! -X cd /dev -X echo "Creating symbolic links to devfs devices" -X for i in `ls ip2` ; do -X if test ! -L ip2$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f ip2$i -X ln -s ip2/$i ip2$i -X fi -X done -X for i in `( cd tts ; ls F* )` ; do -X if test ! -L tty$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f tty$i -X ln -s tts/$i tty$i -X fi -X done -X for i in `( cd cua ; ls F* )` ; do -X DEVNUMBER=`expr $i : 'F\(.*\)'` -X if test ! -L cuf$DEVNUMBER ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f cuf$DEVNUMBER -X ln -s cua/$i cuf$DEVNUMBER -X fi -X done -X exit 0 -fi -X -if test ! -f /proc/tty/drivers -then -X echo "\ -Unable to check driver status. -Make sure proc file system is mounted." -X -X exit 255 -fi -X -if test ! -f /proc/tty/driver/ip2 -then -X echo "\ -Unable to locate ip2 proc file. -Attempting to load driver" -X -X if /sbin/insmod ip2 -X then -X if test ! -f /proc/tty/driver/ip2 -X then -X echo "\ -Unable to locate ip2 proc file after loading driver. -Driver initialization failure or driver version error. -" -X exit 255 -X fi -X else -X echo "Unable to load ip2 driver." -X exit 255 -X fi -fi -X -# Ok... So we got the driver loaded and we can locate the procfs files. -# Next we need our major numbers. -X -TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` -X -echo "\ -TTYMAJOR = $TTYMAJOR -CUAMAJOR = $CUAMAJOR -BRDMAJOR = $BRDMAJOR -" -X -# Ok... Now we should know our major numbers, if appropriate... -# Now we need our boards and start the device loops. -X -grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest -do -X # The test for blank "type" will catch the stats lead-in lines -X # if they exist in the file -X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" -X then -X continue -X fi -X -X BOARDNO=`expr "$number" : '\([0-9]\):'` -X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` -X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` -X -X if test "$BOARDNO" = "" -o "$PORTS" = "" -X then -# This may be a bug. We should at least get this much information -X echo "Unable to process board line" -X continue -X fi -X -X if test "$MINORS" = "" -X then -# Silently skip this one. This board seems to have no boxes -X continue -X fi -X -X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" -X -X if test "$BRDMAJOR" != "" -X then -X BRDMINOR=`expr $BOARDNO \* 4` -X STSMINOR=`expr $BRDMINOR + 1` -X if test ! -c /dev/ip2ipl$BOARDNO ; then -X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR -X fi -X if test ! -c /dev/ip2stat$BOARDNO ; then -X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR -X fi -X fi -X -X if test "$TTYMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/ttyF$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO -X fi -X done -X fi -X -X if test "$CUAMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/cuf$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO -X fi -X done -X fi -done -X -Xexit 0 -SHAR_EOF - (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && - chmod 0755 'ip2mkdev' || - $echo 'restore of' 'ip2mkdev' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'ip2mkdev:' 'MD5 check failed' -cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" - test 4251 -eq "$shar_count" || - $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh17581 -exit 0 diff --git a/Documentation/cpqarray.txt b/Documentation/cpqarray.txt deleted file mode 100644 index c7154e2..0000000 --- a/Documentation/cpqarray.txt +++ /dev/null @@ -1,93 +0,0 @@ -This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SMART (EISA) - * SMART-2/E (EISA) - * SMART-2/P - * SMART-2DH - * SMART-2SL - * SMART-221 - * SMART-3100ES - * SMART-3200 - * Integrated Smart Array Controller - * SA 4200 - * SA 4250ES - * SA 431 - * RAID LC2 Controller - -It should also work with some really old Disk array adapters, but I am -unable to test against these cards: - - * IDA - * IDA-2 - * IAES - - -EISA Controllers: ------------------ - -If you want to use an EISA controller you'll have to supply some -modprobe/lilo parameters. If the driver is compiled into the kernel, must -give it the controller's IO port address at boot time (it is not -necessary to specify the IRQ). For example, if you had two SMART-2/E -controllers, in EISA slots 1 and 2 you'd give it a boot argument like -this: - - smart2=0x1000,0x2000 - -If you were loading the driver as a module, you'd give load it like this: - - modprobe cpqarray eisa=0x1000,0x2000 - -You can use EISA and PCI adapters at the same time. - - -Device Naming: --------------- - -You need some entries in /dev for the ida device. MAKEDEV in the /dev -directory can make device nodes for you automatically. The device setup is -as follows: - -Major numbers: - 72 ida0 - 73 ida1 - 74 ida2 - 75 ida3 - 76 ida4 - 77 ida5 - 78 ida6 - 79 ida7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/ida/c0d0 Controller 0, disk 0, whole device -/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 -/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 -/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/ida/c1d1 Controller 1, disk 1, whole device -/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 -/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 -/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 - - -Changelog: -========== - -10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. - James Nelson - - -1999 : Original Document diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt deleted file mode 100644 index f2560e2..0000000 --- a/Documentation/digiepca.txt +++ /dev/null @@ -1,98 +0,0 @@ -NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at -http://www.digi.com for PCI cards. They no longer maintain this driver, -and have no 2.6 driver for ISA cards. - -This driver requires a number of user-space tools. They can be acquired from -http://www.digi.com, but only works with 2.4 kernels. - - -The Digi Intl. epca driver. ----------------------------- -The Digi Intl. epca driver for Linux supports the following boards: - -Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve -Digi EISA/Xem, PCI/Xem, PCI/Xr - -Limitations: ------------- -Currently the driver only autoprobes for supported PCI boards. - -The Linux MAKEDEV command does not support generating the Digiboard -Devices. Users executing digiConfig to setup EISA and PC series cards -will have their device nodes automatically constructed (cud?? for ~CLOCAL, -and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO -prompt, or those users booting PCI cards may use buildDIGI to construct -the necessary nodes. - -Notes: ------- -This driver may be configured via LILO. For users who have already configured -their driver using digiConfig, configuring from LILO will override previous -settings. Multiple boards may be configured by issuing multiple LILO command -lines. For examples see the bottom of this document. - -Device names start at 0 and continue up. Beware of this as previous Digi -drivers started device names with 1. - -PCI boards are auto-detected and configured by the driver. PCI boards will -be allocated device numbers (internally) beginning with the lowest PCI slot -first. In other words a PCI card in slot 3 will always have higher device -nodes than a PCI card in slot 1. - -LILO config examples: ---------------------- -Using LILO's APPEND command, a string of comma separated identifiers or -integers can be used to configure supported boards. The six values in order -are: - - Enable/Disable this card or Override, - Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), - EISA/Xem (3), PC/64Xe (4), PC/Xi (5), - Enable/Disable alternate pin arrangement, - Number of ports on this card, - I/O Port where card is configured (in HEX if using string identifiers), - Base of memory window (in HEX if using string identifiers), - -NOTE : PCI boards are auto-detected and configured. Do not attempt to -configure PCI boards with the LILO append command. If you wish to override -previous configuration data (As set by digiConfig), but you do not wish to -configure any specific card (Example if there are PCI cards in the system) -the following override command will accomplish this: --> append="digi=2" - -Samples: - append="digiepca=E,PC/Xe,D,16,200,D0000" - or - append="digi=1,0,0,16,512,851968" - -Supporting Tools: ------------------ -Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See -drivers/char/README.epca for more details. Note, -this driver REQUIRES that digiDload be executed prior to it being used. -Failure to do this will result in an ENODEV error. - -Documentation: --------------- -Complete documentation for this product may be found in the tool package. - -Sources of information and support: ------------------------------------ -Digi Intl. support site for this product: - --> http://www.digi.com - -Acknowledgments: ----------------- -Much of this work (And even text) was derived from a similar document -supporting the original public domain DigiBoard driver Copyright (C) -1994,1995 Troy De Jongh. Many thanks to Christoph Lameter -(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored -and contributed to the original document. - -Changelog: ----------- -10-29-04: Update status of driver, remove dead links in document - James Nelson - -2000 (?) Original Document diff --git a/Documentation/floppy.txt b/Documentation/floppy.txt deleted file mode 100644 index 6ccab88..0000000 --- a/Documentation/floppy.txt +++ /dev/null @@ -1,245 +0,0 @@ -This file describes the floppy driver. - -FAQ list: -========= - - A FAQ list may be found in the fdutils package (see below), and also -at . - - -LILO configuration options (Thinkpad users, read this) -====================================================== - - The floppy driver is configured using the 'floppy=' option in -lilo. This option can be typed at the boot prompt, or entered in the -lilo configuration file. - - Example: If your kernel is called linux-2.6.9, type the following line -at the lilo boot prompt (if you have a thinkpad): - - linux-2.6.9 floppy=thinkpad - -You may also enter the following line in /etc/lilo.conf, in the description -of linux-2.6.9: - - append = "floppy=thinkpad" - - Several floppy related options may be given, example: - - linux-2.6.9 floppy=daring floppy=two_fdc - append = "floppy=daring floppy=two_fdc" - - If you give options both in the lilo config file and on the boot -prompt, the option strings of both places are concatenated, the boot -prompt options coming last. That's why there are also options to -restore the default behavior. - - -Module configuration options -============================ - - If you use the floppy driver as a module, use the following syntax: -modprobe floppy - -Example: - modprobe floppy omnibook messages - - If you need certain options enabled every time you load the floppy driver, -you can put: - - options floppy omnibook messages - -in /etc/modprobe.conf. - - - The floppy driver related options are: - - floppy=asus_pci - Sets the bit mask to allow only units 0 and 1. (default) - - floppy=daring - Tells the floppy driver that you have a well behaved floppy controller. - This allows more efficient and smoother operation, but may fail on - certain controllers. This may speed up certain operations. - - floppy=0,daring - Tells the floppy driver that your floppy controller should be used - with caution. - - floppy=one_fdc - Tells the floppy driver that you have only one floppy controller. - (default) - - floppy=two_fdc - floppy=
,two_fdc - Tells the floppy driver that you have two floppy controllers. - The second floppy controller is assumed to be at
. - This option is not needed if the second controller is at address - 0x370, and if you use the 'cmos' option. - - floppy=thinkpad - Tells the floppy driver that you have a Thinkpad. Thinkpads use an - inverted convention for the disk change line. - - floppy=0,thinkpad - Tells the floppy driver that you don't have a Thinkpad. - - floppy=omnibook - floppy=nodma - Tells the floppy driver not to use Dma for data transfers. - This is needed on HP Omnibooks, which don't have a workable - DMA channel for the floppy driver. This option is also useful - if you frequently get "Unable to allocate DMA memory" messages. - Indeed, dma memory needs to be continuous in physical memory, - and is thus harder to find, whereas non-dma buffers may be - allocated in virtual memory. However, I advise against this if - you have an FDC without a FIFO (8272A or 82072). 82072A and - later are OK. You also need at least a 486 to use nodma. - If you use nodma mode, I suggest you also set the FIFO - threshold to 10 or lower, in order to limit the number of data - transfer interrupts. - - If you have a FIFO-able FDC, the floppy driver automatically - falls back on non DMA mode if no DMA-able memory can be found. - If you want to avoid this, explicitly ask for 'yesdma'. - - floppy=yesdma - Tells the floppy driver that a workable DMA channel is available. - (default) - - floppy=nofifo - Disables the FIFO entirely. This is needed if you get "Bus - master arbitration error" messages from your Ethernet card (or - from other devices) while accessing the floppy. - - floppy=usefifo - Enables the FIFO. (default) - - floppy=,fifo_depth - Sets the FIFO threshold. This is mostly relevant in DMA - mode. If this is higher, the floppy driver tolerates more - interrupt latency, but it triggers more interrupts (i.e. it - imposes more load on the rest of the system). If this is - lower, the interrupt latency should be lower too (faster - processor). The benefit of a lower threshold is less - interrupts. - - To tune the fifo threshold, switch on over/underrun messages - using 'floppycontrol --messages'. Then access a floppy - disk. If you get a huge amount of "Over/Underrun - retrying" - messages, then the fifo threshold is too low. Try with a - higher value, until you only get an occasional Over/Underrun. - It is a good idea to compile the floppy driver as a module - when doing this tuning. Indeed, it allows to try different - fifo values without rebooting the machine for each test. Note - that you need to do 'floppycontrol --messages' every time you - re-insert the module. - - Usually, tuning the fifo threshold should not be needed, as - the default (0xa) is reasonable. - - floppy=,,cmos - Sets the CMOS type of to . This is mandatory if - you have more than two floppy drives (only two can be - described in the physical CMOS), or if your BIOS uses - non-standard CMOS types. The CMOS types are: - - 0 - Use the value of the physical CMOS - 1 - 5 1/4 DD - 2 - 5 1/4 HD - 3 - 3 1/2 DD - 4 - 3 1/2 HD - 5 - 3 1/2 ED - 6 - 3 1/2 ED - 16 - unknown or not installed - - (Note: there are two valid types for ED drives. This is because 5 was - initially chosen to represent floppy *tapes*, and 6 for ED drives. - AMI ignored this, and used 5 for ED drives. That's why the floppy - driver handles both.) - - floppy=unexpected_interrupts - Print a warning message when an unexpected interrupt is received. - (default) - - floppy=no_unexpected_interrupts - floppy=L40SX - Don't print a message when an unexpected interrupt is received. This - is needed on IBM L40SX laptops in certain video modes. (There seems - to be an interaction between video and floppy. The unexpected - interrupts affect only performance, and can be safely ignored.) - - floppy=broken_dcl - Don't use the disk change line, but assume that the disk was - changed whenever the device node is reopened. Needed on some - boxes where the disk change line is broken or unsupported. - This should be regarded as a stopgap measure, indeed it makes - floppy operation less efficient due to unneeded cache - flushings, and slightly more unreliable. Please verify your - cable, connection and jumper settings if you have any DCL - problems. However, some older drives, and also some laptops - are known not to have a DCL. - - floppy=debug - Print debugging messages. - - floppy=messages - Print informational messages for some operations (disk change - notifications, warnings about over and underruns, and about - autodetection). - - floppy=silent_dcl_clear - Uses a less noisy way to clear the disk change line (which - doesn't involve seeks). Implied by 'daring' option. - - floppy=,irq - Sets the floppy IRQ to instead of 6. - - floppy=,dma - Sets the floppy DMA channel to instead of 2. - - floppy=slow - Use PS/2 stepping rate: - " PS/2 floppies have much slower step rates than regular floppies. - It's been recommended that take about 1/4 of the default speed - in some more extreme cases." - - -Supporting utilities and additional documentation: -================================================== - - Additional parameters of the floppy driver can be configured at -runtime. Utilities which do this can be found in the fdutils package. -This package also contains a new version of mtools which allows to -access high capacity disks (up to 1992K on a high density 3 1/2 disk!). -It also contains additional documentation about the floppy driver. - -The latest version can be found at fdutils homepage: - http://fdutils.linux.lu - -The fdutils releases can be found at: - http://fdutils.linux.lu/download.html - http://www.tux.org/pub/knaff/fdutils/ - ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ - -Reporting problems about the floppy driver -========================================== - - If you have a question or a bug report about the floppy driver, mail -me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use -comp.os.linux.hardware. As the volume in these groups is rather high, -be sure to include the word "floppy" (or "FLOPPY") in the subject -line. If the reported problem happens when mounting floppy disks, be -sure to mention also the type of the filesystem in the subject line. - - Be sure to read the FAQ before mailing/posting any bug reports! - - Alain - -Changelog -========= - -10-30-2004 : Cleanup, updating, add reference to module configuration. - James Nelson - -6-3-2000 : Original Document diff --git a/Documentation/hayes-esp.txt b/Documentation/hayes-esp.txt deleted file mode 100644 index 09b5d58..0000000 --- a/Documentation/hayes-esp.txt +++ /dev/null @@ -1,154 +0,0 @@ -HAYES ESP DRIVER VERSION 2.1 - -A big thanks to the people at Hayes, especially Alan Adamson. Their support -has enabled me to provide enhancements to the driver. - -Please report your experiences with this driver to me (arobinso@nyx.net). I -am looking for both positive and negative feedback. - -*** IMPORTANT CHANGES FOR 2.1 *** -Support for PIO mode. Five situations will cause PIO mode to be used: -1) A multiport card is detected. PIO mode will always be used. (8 port cards -do not support DMA). -2) The DMA channel is set to an invalid value (anything other than 1 or 3). -3) The DMA buffer/channel could not be allocated. The port will revert to PIO -mode until it is reopened. -4) Less than a specified number of bytes need to be transferred to/from the -FIFOs. PIO mode will be used for that transfer only. -5) A port needs to do a DMA transfer and another port is already using the -DMA channel. PIO mode will be used for that transfer only. - -Since the Hayes ESP seems to conflict with other cards (notably sound cards) -when using DMA, DMA is turned off by default. To use DMA, it must be turned -on explicitly, either with the "dma=" option described below or with -setserial. A multiport card can be forced into DMA mode by using setserial; -however, most multiport cards don't support DMA. - -The latest version of setserial allows the enhanced configuration of the ESP -card to be viewed and modified. -*** - -This package contains the files needed to compile a module to support the Hayes -ESP card. The drivers are basically a modified version of the serial drivers. - -Features: - -- Uses the enhanced mode of the ESP card, allowing a wider range of - interrupts and features than compatibility mode -- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, - reducing CPU load -- Supports primary and secondary ports - - -If the driver is compiled as a module, the IRQs to use can be specified by -using the irq= option. The format is: - -irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] - -The address in brackets is the base address of the card. The IRQ of -nonexistent cards can be set to 0. If an IRQ of a card that does exist is set -to 0, the driver will attempt to guess at the correct IRQ. For example, to set -the IRQ of the card at address 0x300 to 12, the insmod command would be: - -insmod esp irq=0,0,0,0,0,0,12,0 - -The custom divisor can be set by using the divisor= option. The format is the -same as for the irq= option. Each divisor value is a series of hex digits, -with each digit representing the divisor to use for a corresponding port. The -divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value -will automatically set the spd_cust flag. To calculate the divisor to use for -a certain baud rate, divide the port's base baud (generally 921600) by the -desired rate. For example, to set the divisor of the primary port at 0x300 to -4 and the divisor of the secondary port at 0x308 to 8, the insmod command would -be: - -insmod esp divisor=0,0,0,0,0,0,0x84,0 - -The dma= option can be used to set the DMA channel. The channel can be either -1 or 3. Specifying any other value will force the driver to use PIO mode. -For example, to set the DMA channel to 3, the insmod command would be: - -insmod esp dma=3 - -The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger -levels. They specify when the ESP card should send an interrupt. Larger -values will decrease the number of interrupts; however, a value too high may -result in data loss. Valid values are 1 through 1023, with 768 being the -default. For example, to set the receive trigger level to 512 bytes and the -transmit trigger level to 700 bytes, the insmod command would be: - -insmod esp rx_trigger=512 tx_trigger=700 - -The flow_off= and flow_on= options can be used to set the hardware flow off/ -flow on levels. The flow on level must be lower than the flow off level, and -the flow off level should be higher than rx_trigger. Valid values are 1 -through 1023, with 1016 being the default flow off level and 944 being the -default flow on level. For example, to set the flow off level to 1000 bytes -and the flow on level to 935 bytes, the insmod command would be: - -insmod esp flow_off=1000 flow_on=935 - -The rx_timeout= option can be used to set the receive timeout value. This -value indicates how long after receiving the last character that the ESP card -should wait before signalling an interrupt. Valid values are 0 though 255, -with 128 being the default. A value too high will increase latency, and a -value too low will cause unnecessary interrupts. For example, to set the -receive timeout to 255, the insmod command would be: - -insmod esp rx_timeout=255 - -The pio_threshold= option sets the threshold (in number of characters) for -using PIO mode instead of DMA mode. For example, if this value is 32, -transfers of 32 bytes or less will always use PIO mode. - -insmod esp pio_threshold=32 - -Multiple options can be listed on the insmod command line by separating each -option with a space. For example: - -insmod esp dma=3 trigger=512 - -The esp module can be automatically loaded when needed. To cause this to -happen, add the following lines to /etc/modprobe.conf (replacing the last line -with options for your configuration): - -alias char-major-57 esp -alias char-major-58 esp -options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 - -You may also need to run 'depmod -a'. - -Devices must be created manually. To create the devices, note the output from -the module after it is inserted. The output will appear in the location where -kernel messages usually appear (usually /var/adm/messages). Create two devices -for each 'tty' mentioned, one with major of 57 and the other with major of 58. -The minor number should be the same as the tty number reported. The commands -would be (replace ? with the tty number): - -mknod /dev/ttyP? c 57 ? -mknod /dev/cup? c 58 ? - -For example, if the following line appears: - -Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port - -...two devices should be created: - -mknod /dev/ttyP8 c 57 8 -mknod /dev/cup8 c 58 8 - -You may need to set the permissions on the devices: - -chmod 666 /dev/ttyP* -chmod 666 /dev/cup* - -The ESP module and the serial module should not conflict (they can be used at -the same time). After the ESP module has been loaded the ports on the ESP card -will no longer be accessible by the serial driver. - -If I/O errors are experienced when accessing the port, check for IRQ and DMA -conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and -DMAs currently in use). - -Enjoy! -Andrew J. Robinson diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt deleted file mode 100644 index b880ce5..0000000 --- a/Documentation/ioctl-number.txt +++ /dev/null @@ -1,201 +0,0 @@ -Ioctl Numbers -19 October 1999 -Michael Elizabeth Chastain - - -If you are adding new ioctl's to the kernel, you should use the _IO -macros defined in : - - _IO an ioctl with no parameters - _IOW an ioctl with write parameters (copy_from_user) - _IOR an ioctl with read parameters (copy_to_user) - _IOWR an ioctl with both write and read parameters. - -'Write' and 'read' are from the user's point of view, just like the -system calls 'write' and 'read'. For example, a SET_FOO ioctl would -be _IOW, although the kernel would actually read data from user space; -a GET_FOO ioctl would be _IOR, although the kernel would actually write -data to user space. - -The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter -or number from the table below. Because of the large number of drivers, -many drivers share a partial letter with other drivers. - -If you are writing a driver for a new device and need a letter, pick an -unused block with enough room for expansion: 32 to 256 ioctl commands. -You can register the block by patching this file and submitting the -patch to Linus Torvalds. Or you can e-mail me at and -I'll register one for you. - -The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number -to distinguish ioctls from each other. The third argument to _IOW, -_IOR, or _IOWR is the type of the data going into the kernel or coming -out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use -sizeof(arg) as the third argument as this results in your ioctl thinking -it passes an argument of type size_t. - -Some devices use their major number as the identifier; this is OK, as -long as it is unique. Some devices are irregular and don't follow any -convention at all. - -Following this convention is good because: - -(1) Keeping the ioctl's globally unique helps error checking: - if a program calls an ioctl on the wrong device, it will get an - error rather than some unexpected behaviour. - -(2) The 'strace' build procedure automatically finds ioctl numbers - defined with _IO, _IOW, _IOR, or _IOWR. - -(3) 'strace' can decode numbers back into useful names when the - numbers are unique. - -(4) People looking for ioctls can grep for them more easily when - this convention is used to define the ioctl numbers. - -(5) When following the convention, the driver code can use generic - code to copy the parameters between user and kernel space. - -This table lists ioctls visible from user land for Linux/i386. It contains -most drivers up to 2.3.14, but I know I am missing some. - -Code Seq# Include File Comments -======================================================== -0x00 00-1F linux/fs.h conflict! -0x00 00-1F scsi/scsi_ioctl.h conflict! -0x00 00-1F linux/fb.h conflict! -0x00 00-1F linux/wavefront.h conflict! -0x02 all linux/fd.h -0x03 all linux/hdreg.h -0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. -0x06 all linux/lp.h -0x09 all linux/md.h -0x12 all linux/fs.h - linux/blkpg.h -0x1b all InfiniBand Subsystem -0x20 all drivers/cdrom/cm206.h -0x22 all scsi/sg.h -'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem -'1' 00-1F PPS kit from Ulrich Windl - -'8' all SNP8023 advanced NIC card - -'A' 00-1F linux/apm_bios.h -'B' C0-FF advanced bbus - -'C' all linux/soundcard.h -'D' all asm-s390/dasd.h -'E' all linux/input.h -'F' all linux/fb.h -'H' all linux/hiddev.h -'I' all linux/isdn.h -'J' 00-1F drivers/scsi/gdth_ioctl.h -'K' all linux/kd.h -'L' 00-1F linux/loop.h -'L' 20-2F driver/usb/misc/vstusb.h -'L' E0-FF linux/ppdd.h encrypted disk device driver - -'M' all linux/soundcard.h -'N' 00-1F drivers/usb/scanner.h -'P' all linux/soundcard.h -'Q' all linux/soundcard.h -'R' 00-1F linux/random.h -'S' all linux/cdrom.h conflict! -'S' 80-81 scsi/scsi_ioctl.h conflict! -'S' 82-FF scsi/scsi.h conflict! -'T' all linux/soundcard.h conflict! -'T' all asm-i386/ioctls.h conflict! -'U' 00-EF linux/drivers/usb/usb.h -'V' all linux/vt.h -'W' 00-1F linux/watchdog.h conflict! -'W' 00-1F linux/wanrouter.h conflict! -'X' all linux/xfs_fs.h -'Y' all linux/cyclades.h -'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices - -'a' all ATM on linux - -'b' 00-FF bit3 vme host bridge - -'c' 00-7F linux/comstats.h conflict! -'c' 00-7F linux/coda.h conflict! -'c' 80-9F asm-s390/chsc.h -'d' 00-FF linux/char/drm/drm/h conflict! -'d' 00-DF linux/video_decoder.h conflict! -'d' F0-FF linux/digi1.h -'e' all linux/digi1.h conflict! -'e' 00-1F linux/video_encoder.h conflict! -'e' 00-1F net/irda/irtty.h conflict! -'f' 00-1F linux/ext2_fs.h -'h' 00-7F Charon filesystem - -'i' 00-3F linux/i2o.h -'j' 00-3F linux/joystick.h -'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system - -'l' 40-7F linux/udf_fs_i.h in development: - -'m' all linux/mtio.h conflict! -'m' all linux/soundcard.h conflict! -'m' all linux/synclink.h conflict! -'m' 00-1F net/irda/irmod.h conflict! -'n' 00-7F linux/ncp_fs.h -'n' E0-FF video/matrox.h matroxfb -'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 -'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) -'p' 00-3F linux/mc146818rtc.h conflict! -'p' 40-7F linux/nvram.h -'p' 80-9F user-space parport - -'q' 00-1F linux/serio.h -'q' 80-FF Internet PhoneJACK, Internet LineJACK - -'r' 00-1F linux/msdos_fs.h -'s' all linux/cdk.h -'t' 00-7F linux/if_ppp.h -'t' 80-8F linux/isdn_ppp.h -'u' 00-1F linux/smb_fs.h -'v' 00-1F linux/ext2_fs.h conflict! -'v' all linux/videodev.h conflict! -'w' all CERN SCI driver -'y' 00-1F packet based user level communications - -'z' 00-3F CAN bus card - -'z' 40-7F CAN bus card - -0x80 00-1F linux/fb.h -0x81 00-1F linux/videotext.h -0x89 00-06 asm-i386/sockios.h -0x89 0B-DF linux/sockios.h -0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range -0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range -0x8B all linux/wireless.h -0x8C 00-3F WiNRADiO driver - -0x90 00 drivers/cdrom/sbpcd.h -0x93 60-7F linux/auto_fs.h -0x99 00-0F 537-Addinboard driver - -0xA0 all linux/sdp/sdp.h Industrial Device Project - -0xA3 80-8F Port ACL in development: - -0xA3 90-9F linux/dtlk.h -0xAB 00-1F linux/nbd.h -0xAC 00-1F linux/raw.h -0xAD 00 Netfilter device in development: - -0xAE all linux/kvm.h Kernel-based Virtual Machine - -0xB0 all RATIO devices in development: - -0xB1 00-1F PPPoX -0xCB 00-1F CBM serial IEC bus in development: - -0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ - -0xF3 00-3F video/sisfb.h sisfb (in development) - -0xF4 00-1F video/mbxfb.h mbxfb - diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX new file mode 100644 index 0000000..d2fe4d4 --- /dev/null +++ b/Documentation/ioctl/00-INDEX @@ -0,0 +1,10 @@ +00-INDEX + - this file +cdrom.txt + - summary of CDROM ioctl calls +hdio.txt + - summary of HDIO_ ioctl calls +ioctl-decoding.txt + - how to decode the bits of an IOCTL code +ioctl-number.txt + - how to implement and register device/driver ioctl calls diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt new file mode 100644 index 0000000..b880ce5 --- /dev/null +++ b/Documentation/ioctl/ioctl-number.txt @@ -0,0 +1,201 @@ +Ioctl Numbers +19 October 1999 +Michael Elizabeth Chastain + + +If you are adding new ioctl's to the kernel, you should use the _IO +macros defined in : + + _IO an ioctl with no parameters + _IOW an ioctl with write parameters (copy_from_user) + _IOR an ioctl with read parameters (copy_to_user) + _IOWR an ioctl with both write and read parameters. + +'Write' and 'read' are from the user's point of view, just like the +system calls 'write' and 'read'. For example, a SET_FOO ioctl would +be _IOW, although the kernel would actually read data from user space; +a GET_FOO ioctl would be _IOR, although the kernel would actually write +data to user space. + +The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter +or number from the table below. Because of the large number of drivers, +many drivers share a partial letter with other drivers. + +If you are writing a driver for a new device and need a letter, pick an +unused block with enough room for expansion: 32 to 256 ioctl commands. +You can register the block by patching this file and submitting the +patch to Linus Torvalds. Or you can e-mail me at and +I'll register one for you. + +The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number +to distinguish ioctls from each other. The third argument to _IOW, +_IOR, or _IOWR is the type of the data going into the kernel or coming +out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use +sizeof(arg) as the third argument as this results in your ioctl thinking +it passes an argument of type size_t. + +Some devices use their major number as the identifier; this is OK, as +long as it is unique. Some devices are irregular and don't follow any +convention at all. + +Following this convention is good because: + +(1) Keeping the ioctl's globally unique helps error checking: + if a program calls an ioctl on the wrong device, it will get an + error rather than some unexpected behaviour. + +(2) The 'strace' build procedure automatically finds ioctl numbers + defined with _IO, _IOW, _IOR, or _IOWR. + +(3) 'strace' can decode numbers back into useful names when the + numbers are unique. + +(4) People looking for ioctls can grep for them more easily when + this convention is used to define the ioctl numbers. + +(5) When following the convention, the driver code can use generic + code to copy the parameters between user and kernel space. + +This table lists ioctls visible from user land for Linux/i386. It contains +most drivers up to 2.3.14, but I know I am missing some. + +Code Seq# Include File Comments +======================================================== +0x00 00-1F linux/fs.h conflict! +0x00 00-1F scsi/scsi_ioctl.h conflict! +0x00 00-1F linux/fb.h conflict! +0x00 00-1F linux/wavefront.h conflict! +0x02 all linux/fd.h +0x03 all linux/hdreg.h +0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. +0x06 all linux/lp.h +0x09 all linux/md.h +0x12 all linux/fs.h + linux/blkpg.h +0x1b all InfiniBand Subsystem +0x20 all drivers/cdrom/cm206.h +0x22 all scsi/sg.h +'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem +'1' 00-1F PPS kit from Ulrich Windl + +'8' all SNP8023 advanced NIC card + +'A' 00-1F linux/apm_bios.h +'B' C0-FF advanced bbus + +'C' all linux/soundcard.h +'D' all asm-s390/dasd.h +'E' all linux/input.h +'F' all linux/fb.h +'H' all linux/hiddev.h +'I' all linux/isdn.h +'J' 00-1F drivers/scsi/gdth_ioctl.h +'K' all linux/kd.h +'L' 00-1F linux/loop.h +'L' 20-2F driver/usb/misc/vstusb.h +'L' E0-FF linux/ppdd.h encrypted disk device driver + +'M' all linux/soundcard.h +'N' 00-1F drivers/usb/scanner.h +'P' all linux/soundcard.h +'Q' all linux/soundcard.h +'R' 00-1F linux/random.h +'S' all linux/cdrom.h conflict! +'S' 80-81 scsi/scsi_ioctl.h conflict! +'S' 82-FF scsi/scsi.h conflict! +'T' all linux/soundcard.h conflict! +'T' all asm-i386/ioctls.h conflict! +'U' 00-EF linux/drivers/usb/usb.h +'V' all linux/vt.h +'W' 00-1F linux/watchdog.h conflict! +'W' 00-1F linux/wanrouter.h conflict! +'X' all linux/xfs_fs.h +'Y' all linux/cyclades.h +'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices + +'a' all ATM on linux + +'b' 00-FF bit3 vme host bridge + +'c' 00-7F linux/comstats.h conflict! +'c' 00-7F linux/coda.h conflict! +'c' 80-9F asm-s390/chsc.h +'d' 00-FF linux/char/drm/drm/h conflict! +'d' 00-DF linux/video_decoder.h conflict! +'d' F0-FF linux/digi1.h +'e' all linux/digi1.h conflict! +'e' 00-1F linux/video_encoder.h conflict! +'e' 00-1F net/irda/irtty.h conflict! +'f' 00-1F linux/ext2_fs.h +'h' 00-7F Charon filesystem + +'i' 00-3F linux/i2o.h +'j' 00-3F linux/joystick.h +'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system + +'l' 40-7F linux/udf_fs_i.h in development: + +'m' all linux/mtio.h conflict! +'m' all linux/soundcard.h conflict! +'m' all linux/synclink.h conflict! +'m' 00-1F net/irda/irmod.h conflict! +'n' 00-7F linux/ncp_fs.h +'n' E0-FF video/matrox.h matroxfb +'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 +'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) +'p' 00-3F linux/mc146818rtc.h conflict! +'p' 40-7F linux/nvram.h +'p' 80-9F user-space parport + +'q' 00-1F linux/serio.h +'q' 80-FF Internet PhoneJACK, Internet LineJACK + +'r' 00-1F linux/msdos_fs.h +'s' all linux/cdk.h +'t' 00-7F linux/if_ppp.h +'t' 80-8F linux/isdn_ppp.h +'u' 00-1F linux/smb_fs.h +'v' 00-1F linux/ext2_fs.h conflict! +'v' all linux/videodev.h conflict! +'w' all CERN SCI driver +'y' 00-1F packet based user level communications + +'z' 00-3F CAN bus card + +'z' 40-7F CAN bus card + +0x80 00-1F linux/fb.h +0x81 00-1F linux/videotext.h +0x89 00-06 asm-i386/sockios.h +0x89 0B-DF linux/sockios.h +0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range +0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range +0x8B all linux/wireless.h +0x8C 00-3F WiNRADiO driver + +0x90 00 drivers/cdrom/sbpcd.h +0x93 60-7F linux/auto_fs.h +0x99 00-0F 537-Addinboard driver + +0xA0 all linux/sdp/sdp.h Industrial Device Project + +0xA3 80-8F Port ACL in development: + +0xA3 90-9F linux/dtlk.h +0xAB 00-1F linux/nbd.h +0xAC 00-1F linux/raw.h +0xAD 00 Netfilter device in development: + +0xAE all linux/kvm.h Kernel-based Virtual Machine + +0xB0 all RATIO devices in development: + +0xB1 00-1F PPPoX +0xCB 00-1F CBM serial IEC bus in development: + +0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ + +0xF3 00-3F video/sisfb.h sisfb (in development) + +0xF4 00-1F video/mbxfb.h mbxfb + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c600c4f..9fa6508 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -629,7 +629,7 @@ and is between 256 and 4096 characters. It is defined in the file digiepca= [HW,SERIAL] See drivers/char/README.epca and - Documentation/digiepca.txt. + Documentation/serial/digiepca.txt. disable_mtrr_cleanup [X86] enable_mtrr_cleanup [X86] @@ -740,7 +740,7 @@ and is between 256 and 4096 characters. It is defined in the file See header of drivers/scsi/fdomain.c. floppy= [HW] - See Documentation/floppy.txt. + See Documentation/blockdev/floppy.txt. force_pal_cache_flush [IA-64] Avoid check_sal_cache_flush which may hang on @@ -1101,7 +1101,7 @@ and is between 256 and 4096 characters. It is defined in the file the same attribute, the last one is used. load_ramdisk= [RAM] List of ramdisks to load from floppy - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. lockd.nlm_grace_period=P [NFS] Assign grace period. Format: @@ -1596,7 +1596,7 @@ and is between 256 and 4096 characters. It is defined in the file pcd. [PARIDE] See header of drivers/block/paride/pcd.c. - See also Documentation/paride.txt. + See also Documentation/blockdev/paride.txt. pci=option[,option...] [PCI] various PCI subsystem options: off [X86] don't probe for the PCI bus @@ -1697,7 +1697,7 @@ and is between 256 and 4096 characters. It is defined in the file pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at boot time. @@ -1705,10 +1705,10 @@ and is between 256 and 4096 characters. It is defined in the file See arch/parisc/kernel/pdc_chassis.c pf. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pg. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pirq= [SMP,APIC] Manual mp-table setup See Documentation/x86/i386/IO-APIC.txt. @@ -1778,7 +1778,7 @@ and is between 256 and 4096 characters. It is defined in the file prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). @@ -1798,7 +1798,7 @@ and is between 256 and 4096 characters. It is defined in the file ,,,,, pt. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pty.legacy_count= [KNL] Number of legacy pty's. Overwrites compiled-in @@ -1812,10 +1812,10 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/md.txt. ramdisk_blocksize= [RAM] - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. ramdisk_size= [RAM] Sizes of RAM disks in kilobytes - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. rcupdate.blimit= [KNL,BOOT] Set maximum number of finished RCU callbacks to process @@ -2147,7 +2147,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter - See Documentation/specialix.txt. + See Documentation/serial/specialix.txt. spia_io_base= [HW,MTD] spia_fio_base= diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio deleted file mode 100644 index 5337e80..0000000 --- a/Documentation/moxa-smartio +++ /dev/null @@ -1,523 +0,0 @@ -============================================================================= - MOXA Smartio/Industio Family Device Driver Installation Guide - for Linux Kernel 2.4.x, 2.6.x - Copyright (C) 2008, Moxa Inc. -============================================================================= -Date: 01/21/2008 - -Content - -1. Introduction -2. System Requirement -3. Installation - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation -4. Utilities -5. Setserial -6. Troubleshooting - ------------------------------------------------------------------------------ -1. Introduction - - The Smartio/Industio/UPCI family Linux driver supports following multiport - boards. - - - 2 ports multiport board - CP-102U, CP-102UL, CP-102UF - CP-132U-I, CP-132UL, - CP-132, CP-132I, CP132S, CP-132IS, - CI-132, CI-132I, CI-132IS, - (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) - - - 4 ports multiport board - CP-104EL, - CP-104UL, CP-104JU, - CP-134U, CP-134U-I, - C104H/PCI, C104HS/PCI, - CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, - C104H, C104HS, - CI-104J, CI-104JS, - CI-134, CI-134I, CI-134IS, - (C114HI, CT-114I, C104P) - POS-104UL, - CB-114, - CB-134I - - - 8 ports multiport board - CP-118EL, CP-168EL, - CP-118U, CP-168U, - C168H/PCI, - C168H, C168HS, - (C168P), - CB-108 - - This driver and installation procedure have been developed upon Linux Kernel - 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order - to maintain compatibility, this version has also been properly tested with - RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem - occurs, please contact Moxa at support@moxa.com.tw. - - In addition to device driver, useful utilities are also provided in this - version. They are - - msdiag Diagnostic program for displaying installed Moxa - Smartio/Industio boards. - - msmon Monitor program to observe data count and line status signals. - - msterm A simple terminal program which is useful in testing serial - ports. - - io-irq.exe Configuration program to setup ISA boards. Please note that - this program can only be executed under DOS. - - All the drivers and utilities are published in form of source code under - GNU General Public License in this version. Please refer to GNU General - Public License announcement in each source code file for more detail. - - In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. - - This version of driver can be installed as Loadable Module (Module driver) - or built-in into kernel (Static driver). You may refer to following - installation procedure for suitable one. Before you install the driver, - please refer to hardware installation procedure in the User's Manual. - - We assume the user should be familiar with following documents. - - Serial-HOWTO - - Kernel-HOWTO - ------------------------------------------------------------------------------ -2. System Requirement - - Hardware platform: Intel x86 machine - - Kernel version: 2.4.x or 2.6.x - - gcc version 2.72 or later - - Maximum 4 boards can be installed in combination - ------------------------------------------------------------------------------ -3. Installation - - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation - - - 3.1 Hardware installation - - There are two types of buses, ISA and PCI, for Smartio/Industio - family multiport board. - - ISA board - --------- - You'll have to configure CAP address, I/O address, Interrupt Vector - as well as IRQ before installing this driver. Please refer to hardware - installation procedure in User's Manual before proceed any further. - Please make sure the JP1 is open after the ISA board is set properly. - - PCI/UPCI board - -------------- - You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict - with other ISA devices. Please refer to hardware installation - procedure in User's Manual in advance. - - PCI IRQ Sharing - ----------- - Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio/Industio PCI Family multiport boards can be installed - together on one system and they can share the same IRQ. - - - 3.2 Driver files - - The driver file may be obtained from ftp, CD-ROM or floppy disk. The - first step, anyway, is to copy driver file "mxser.tgz" into specified - directory. e.g. /moxa. The execute commands as below. - - # cd / - # mkdir moxa - # cd /moxa - # tar xvf /dev/fd0 - - or - - # cd / - # mkdir moxa - # cd /moxa - # cp /mnt/cdrom//mxser.tgz . - # tar xvfz mxser.tgz - - - 3.3 Device naming convention - - You may find all the driver and utilities files in /moxa/mxser. - Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.4. - If static driver is required, please refer to 3.5. - - Dialin and callout port - ----------------------- - This driver remains traditional serial device properties. There are - two special file name for each serial port. One is dial-in port - which is named "ttyMxx". For callout port, the naming convention - is "cumxx". - - Device naming when more than 2 boards installed - ----------------------------------------------- - Naming convention for each Smartio/Industio multiport board is - pre-defined as below. - - Board Num. Dial-in Port Callout port - 1st board ttyM0 - ttyM7 cum0 - cum7 - 2nd board ttyM8 - ttyM15 cum8 - cum15 - 3rd board ttyM16 - ttyM23 cum16 - cum23 - 4th board ttyM24 - ttym31 cum24 - cum31 - - - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* - device instead. - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - - Board sequence - -------------- - This driver will activate ISA boards according to the parameter set - in the driver. After all specified ISA board activated, PCI board - will be installed in the system automatically driven. - Therefore the board number is sorted by the CAP address of ISA boards. - For PCI boards, their sequence will be after ISA boards and C168H/PCI - has higher priority than C104H/PCI boards. - - 3.4 Module driver configuration - Module driver is easiest way to install. If you prefer static driver - installation, please skip this paragraph. - - - ------------- Prepare to use the MOXA driver-------------------- - 3.4.1 Create tty device with correct major number - Before using MOXA driver, your system must have the tty devices - which are created with driver's major number. We offer one shell - script "msmknod" to simplify the procedure. - This step is only needed to be executed once. But you still - need to do this procedure when: - a. You change the driver's major number. Please refer the "3.7" - section. - b. Your total installed MOXA boards number is changed. Maybe you - add/delete one MOXA board. - c. You want to change the tty name. This needs to modify the - shell script "msmknod" - - The procedure is: - # cd /moxa/mxser/driver - # ./msmknod - - This shell script will require the major number for dial-in - device and callout device to create tty device. You also need - to specify the total installed MOXA board number. Default major - numbers for dial-in device and callout device are 30, 35. If - you need to change to other number, please refer section "3.7" - for more detailed procedure. - Msmknod will delete any special files occupying the same device - naming. - - 3.4.2 Build the MOXA driver and utilities - Before using the MOXA driver and utilities, you need compile the - all the source code. This step is only need to be executed once. - But you still re-compile the source code if you modify the source - code. For example, if you change the driver's major number (see - "3.7" section), then you need to do this step again. - - Find "Makefile" in /moxa/mxser, then run - - # make clean; make install - - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: - # make clean; make installsp1 - - For Red Hat Enterprise Linux AS4/ES4/WS4: - # make clean; make installsp2 - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively. - - ------------- Load MOXA driver-------------------- - 3.4.3 Load the MOXA driver - - # modprobe mxser - - will activate the module driver. You may run "lsmod" to check - if "mxser" is activated. If the MOXA board is ISA board, the - is needed. Please refer to section "3.4.5" for more - information. - - - ------------- Load MOXA driver on boot -------------------- - 3.4.4 For the above description, you may manually execute - "modprobe mxser" to activate this driver and run - "rmmod mxser" to remove it. - However, it's better to have a boot time configuration to - eliminate manual operation. Boot time configuration can be - achieved by rc file. We offer one "rc.mxser" file to simplify - the procedure under "moxa/mxser/driver". - - But if you use ISA board, please modify the "modprobe ..." command - to add the argument (see "3.4.5" section). After modifying the - rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" - manually to make sure the modification is ok. If any error - encountered, please try to modify again. If the modification is - completed, follow the below step. - - Run following command for setting rc files. - - # cd /moxa/mxser/driver - # cp ./rc.mxser /etc/rc.d - # cd /etc/rc.d - - Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, - create it by vi, run "chmod 755 rc.serial" to change the permission. - Add "/etc/rc.d/rc.mxser" in last line, - - Reboot and check if moxa.o activated by "lsmod" command. - - 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, - you'll have to add parameter to specify CAP address of given - board while activating "mxser.o". The format for parameters are - as follows. - - modprobe mxser ioaddr=0x???,0x???,0x???,0x??? - | | | | - | | | +- 4th ISA board - | | +------ 3rd ISA board - | +------------ 2nd ISA board - +------------------- 1st ISA board - - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x - - Note: To use static driver, you must install the linux kernel - source package. - - 3.5.1 Backup the built-in driver in the kernel. - # cd /usr/src/linux/drivers/char - # mv mxser.c mxser.c.old - - For Red Hat 7.x user, you need to create link: - # cd /usr/src - # ln -s linux-2.4 linux - - 3.5.2 Create link - # cd /usr/src/linux/drivers/char - # ln -s /moxa/mxser/driver/mxser.c mxser.c - - 3.5.3 Add CAP address list for ISA boards. For PCI boards user, - please skip this step. - - In module mode, the CAP address for ISA board is given by - parameter. In static driver configuration, you'll have to - assign it within driver's source code. If you will not - install any ISA boards, you may skip to next portion. - The instructions to modify driver source code are as - below. - a. # cd /moxa/mxser/driver - # vi mxser.c - b. Find the array mxserBoardCAP[] as below. - - static int mxserBoardCAP[] - = {0x00, 0x00, 0x00, 0x00}; - - c. Change the address within this array using vi. For - example, to driver 2 ISA boards with CAP address - 0x280 and 0x180 as 1st and 2nd board. Just to change - the source code as follows. - - static int mxserBoardCAP[] - = {0x280, 0x180, 0x00, 0x00}; - - 3.5.4 Setup kernel configuration - - Configure the kernel: - - # cd /usr/src/linux - # make menuconfig - - You will go into a menu-driven system. Please select [Character - devices][Non-standard serial port support], enable the [Moxa - SmartIO support] driver with "[*]" for built-in (not "[M]"), then - select [Exit] to exit this program. - - 3.5.5 Rebuild kernel - The following are for Linux kernel rebuilding, for your - reference only. - For appropriate details, please refer to the Linux document. - - a. cd /usr/src/linux - b. make clean /* take a few minutes */ - c. make dep /* take a few minutes */ - d. make bzImage /* take probably 10-20 minutes */ - e. make install /* copy boot image to correct position */ - f. Please make sure the boot kernel (vmlinuz) is in the - correct position. - g. If you use 'lilo' utility, you should check /etc/lilo.conf - 'image' item specified the path which is the 'vmlinuz' path, - or you will load wrong (or old) boot kernel image (vmlinuz). - After checking /etc/lilo.conf, please run "lilo". - - Note that if the result of "make bzImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make menuconfig" in - directory /usr/src/linux. - - - 3.5.6 Make tty device and special file - # cd /moxa/mxser/driver - # ./msmknod - - 3.5.7 Make utility - # cd /moxa/mxser/utility - # make clean; make install - - 3.5.8 Reboot - - - - 3.6 Custom configuration - Although this driver already provides you default configuration, you - still can change the device name and major number. The instruction to - change these parameters are shown as below. - - Change Device name - ------------------ - If you'd like to use other device names instead of default naming - convention, all you have to do is to modify the internal code - within the shell script "msmknod". First, you have to open "msmknod" - by vi. Locate each line contains "ttyM" and "cum" and change them - to the device name you desired. "msmknod" creates the device names - you need next time executed. - - Change Major number - ------------------- - If major number 30 and 35 had been occupied, you may have to select - 2 free major numbers for this driver. There are 3 steps to change - major numbers. - - 3.6.1 Find free major numbers - In /proc/devices, you may find all the major numbers occupied - in the system. Please select 2 major numbers that are available. - e.g. 40, 45. - 3.6.2 Create special files - Run /moxa/mxser/driver/msmknod to create special files with - specified major numbers. - 3.6.3 Modify driver with new major number - Run vi to open /moxa/mxser/driver/mxser.c. Locate the line - contains "MXSERMAJOR". Change the content as below. - #define MXSERMAJOR 40 - #define MXSERCUMAJOR 45 - 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - - 3.7 Verify driver installation - You may refer to /var/log/messages to check the latest status - log reported by this driver whenever it's activated. - ------------------------------------------------------------------------------ -4. Utilities - There are 3 utilities contained in this driver. They are msdiag, msmon and - msterm. These 3 utilities are released in form of source code. They should - be compiled into executable file and copied into /usr/bin. - - Before using these utilities, please load driver (refer 3.4 & 3.5) and - make sure you had run the "msmknod" utility. - - msdiag - Diagnostic - -------------------- - This utility provides the function to display what Moxa Smartio/Industio - board found by driver in the system. - - msmon - Port Monitoring - ----------------------- - This utility gives the user a quick view about all the MOXA ports' - activities. One can easily learn each port's total received/transmitted - (Rx/Tx) character count since the time when the monitoring is started. - Rx/Tx throughputs per second are also reported in interval basis (e.g. - the last 5 seconds) and in average basis (since the time the monitoring - is started). You can reset all ports' count by key. <+> <-> - (plus/minus) keys to change the displaying time interval. Press - on the port, that cursor stay, to view the port's communication - parameters, signal status, and input/output queue. - - msterm - Terminal Emulation - --------------------------- - This utility provides data sending and receiving ability of all tty ports, - especially for MOXA ports. It is quite useful for testing simple - application, for example, sending AT command to a modem connected to the - port or used as a terminal for login purpose. Note that this is only a - dumb terminal emulation without handling full screen operation. - ------------------------------------------------------------------------------ -5. Setserial - - Supported Setserial parameters are listed as below. - - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) - close_delay set the amount of time(in 1/100 of a second) that DTR - should be kept low while being closed. - closing_wait set the amount of time(in 1/100 of a second) that the - serial port should wait for data to be drained while - being closed, before the receiver is disable. - spd_hi Use 57.6kb when the application requests 38.4kb. - spd_vhi Use 115.2kb when the application requests 38.4kb. - spd_shi Use 230.4kb when the application requests 38.4kb. - spd_warp Use 460.8kb when the application requests 38.4kb. - spd_normal Use 38.4kb when the application requests 38.4kb. - spd_cust Use the custom divisor to set the speed when the - application requests 38.4kb. - divisor This option set the custom divison. - baud_base This option set the base baud rate. - ------------------------------------------------------------------------------ -6. Troubleshooting - - The boot time error messages and solutions are stated as clearly as - possible. If all the possible solutions fail, please contact our technical - support team to get more help. - - - Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board - and after are ignored. - Solution: - To avoid this problem, please unplug fifth and after board, because Moxa - driver supports up to 4 boards. - - Error msg: Request_irq fail, IRQ(?) may be conflict with another device. - Solution: - Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation, please check /proc/interrupts to find - free IRQ and simply change another free IRQ for Moxa board. - - Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. - Solution: - Each port within the same multiport board shares the same IRQ. Please set - one IRQ (IRQ doesn't equal to zero) for one Moxa board. - - Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). - Solution: - Moxa ISA board needs an interrupt vector.Please refer to user's manual - "Hardware Installation" chapter to set interrupt vector. - - Error msg: Couldn't install MOXA Smartio/Industio family driver! - Solution: - Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.7 to change a free major number for - Moxa driver. - - Error msg: Couldn't install MOXA Smartio/Industio family callout driver! - Solution: - Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.7 to - change a free callout device major number for Moxa driver. - - ------------------------------------------------------------------------------ - diff --git a/Documentation/nbd.txt b/Documentation/nbd.txt deleted file mode 100644 index aeb93ff..0000000 --- a/Documentation/nbd.txt +++ /dev/null @@ -1,47 +0,0 @@ - Network Block Device (TCP version) - - What is it: With this compiled in the kernel (or as a module), Linux - can use a remote server as one of its block devices. So every time - the client computer wants to read, e.g., /dev/nb0, it sends a - request over TCP to the server, which will reply with the data read. - This can be used for stations with low disk space (or even diskless - - if you boot from floppy) to borrow disk space from another computer. - Unlike NFS, it is possible to put any filesystem on it, etc. It should - even be possible to use NBD as a root filesystem (I've never tried), - but it requires a user-level program to be in the initrd to start. - It also allows you to run block-device in user land (making server - and client physically the same computer, communicating using loopback). - - Current state: It currently works. Network block device is stable. - I originally thought that it was impossible to swap over TCP. It - turned out not to be true - swapping over TCP now works and seems - to be deadlock-free, but it requires heavy patches into Linux's - network layer. - - For more information, or to download the nbd-client and nbd-server - tools, go to http://nbd.sf.net/. - - Howto: To setup nbd, you can simply do the following: - - First, serve a device or file from a remote server: - - nbd-server - - e.g., - root@server1 # nbd-server 1234 /dev/sdb1 - - (serves sdb1 partition on TCP port 1234) - - Then, on the local (client) system: - - nbd-client /dev/nb[0-n] - - e.g., - root@client1 # nbd-client server1 1234 /dev/nb0 - - (creates the nb0 device on client1) - - The nbd kernel module need only be installed on the client - system, as the nbd-server is completely in userspace. In fact, - the nbd-server has been successfully ported to other operating - systems, including Windows. diff --git a/Documentation/paride.txt b/Documentation/paride.txt deleted file mode 100644 index e431267..0000000 --- a/Documentation/paride.txt +++ /dev/null @@ -1,417 +0,0 @@ - - Linux and parallel port IDE devices - -PARIDE v1.03 (c) 1997-8 Grant Guenther - -1. Introduction - -Owing to the simplicity and near universality of the parallel port interface -to personal computers, many external devices such as portable hard-disk, -CD-ROM, LS-120 and tape drives use the parallel port to connect to their -host computer. While some devices (notably scanners) use ad-hoc methods -to pass commands and data through the parallel port interface, most -external devices are actually identical to an internal model, but with -a parallel-port adapter chip added in. Some of the original parallel port -adapters were little more than mechanisms for multiplexing a SCSI bus. -(The Iomega PPA-3 adapter used in the ZIP drives is an example of this -approach). Most current designs, however, take a different approach. -The adapter chip reproduces a small ISA or IDE bus in the external device -and the communication protocol provides operations for reading and writing -device registers, as well as data block transfer functions. Sometimes, -the device being addressed via the parallel cable is a standard SCSI -controller like an NCR 5380. The "ditto" family of external tape -drives use the ISA replicator to interface a floppy disk controller, -which is then connected to a floppy-tape mechanism. The vast majority -of external parallel port devices, however, are now based on standard -IDE type devices, which require no intermediate controller. If one -were to open up a parallel port CD-ROM drive, for instance, one would -find a standard ATAPI CD-ROM drive, a power supply, and a single adapter -that interconnected a standard PC parallel port cable and a standard -IDE cable. It is usually possible to exchange the CD-ROM device with -any other device using the IDE interface. - -The document describes the support in Linux for parallel port IDE -devices. It does not cover parallel port SCSI devices, "ditto" tape -drives or scanners. Many different devices are supported by the -parallel port IDE subsystem, including: - - MicroSolutions backpack CD-ROM - MicroSolutions backpack PD/CD - MicroSolutions backpack hard-drives - MicroSolutions backpack 8000t tape drive - SyQuest EZ-135, EZ-230 & SparQ drives - Avatar Shark - Imation Superdisk LS-120 - Maxell Superdisk LS-120 - FreeCom Power CD - Hewlett-Packard 5GB and 8GB tape drives - Hewlett-Packard 7100 and 7200 CD-RW drives - -as well as most of the clone and no-name products on the market. - -To support such a wide range of devices, PARIDE, the parallel port IDE -subsystem, is actually structured in three parts. There is a base -paride module which provides a registry and some common methods for -accessing the parallel ports. The second component is a set of -high-level drivers for each of the different types of supported devices: - - pd IDE disk - pcd ATAPI CD-ROM - pf ATAPI disk - pt ATAPI tape - pg ATAPI generic - -(Currently, the pg driver is only used with CD-R drives). - -The high-level drivers function according to the relevant standards. -The third component of PARIDE is a set of low-level protocol drivers -for each of the parallel port IDE adapter chips. Thanks to the interest -and encouragement of Linux users from many parts of the world, -support is available for almost all known adapter protocols: - - aten ATEN EH-100 (HK) - bpck Microsolutions backpack (US) - comm DataStor (old-type) "commuter" adapter (TW) - dstr DataStor EP-2000 (TW) - epat Shuttle EPAT (UK) - epia Shuttle EPIA (UK) - fit2 FIT TD-2000 (US) - fit3 FIT TD-3000 (US) - friq Freecom IQ cable (DE) - frpw Freecom Power (DE) - kbic KingByte KBIC-951A and KBIC-971A (TW) - ktti KT Technology PHd adapter (SG) - on20 OnSpec 90c20 (US) - on26 OnSpec 90c26 (US) - - -2. Using the PARIDE subsystem - -While configuring the Linux kernel, you may choose either to build -the PARIDE drivers into your kernel, or to build them as modules. - -In either case, you will need to select "Parallel port IDE device support" -as well as at least one of the high-level drivers and at least one -of the parallel port communication protocols. If you do not know -what kind of parallel port adapter is used in your drive, you could -begin by checking the file names and any text files on your DOS -installation floppy. Alternatively, you can look at the markings on -the adapter chip itself. That's usually sufficient to identify the -correct device. - -You can actually select all the protocol modules, and allow the PARIDE -subsystem to try them all for you. - -For the "brand-name" products listed above, here are the protocol -and high-level drivers that you would use: - - Manufacturer Model Driver Protocol - - MicroSolutions CD-ROM pcd bpck - MicroSolutions PD drive pf bpck - MicroSolutions hard-drive pd bpck - MicroSolutions 8000t tape pt bpck - SyQuest EZ, SparQ pd epat - Imation Superdisk pf epat - Maxell Superdisk pf friq - Avatar Shark pd epat - FreeCom CD-ROM pcd frpw - Hewlett-Packard 5GB Tape pt epat - Hewlett-Packard 7200e (CD) pcd epat - Hewlett-Packard 7200e (CD-R) pg epat - -2.1 Configuring built-in drivers - -We recommend that you get to know how the drivers work and how to -configure them as loadable modules, before attempting to compile a -kernel with the drivers built-in. - -If you built all of your PARIDE support directly into your kernel, -and you have just a single parallel port IDE device, your kernel should -locate it automatically for you. If you have more than one device, -you may need to give some command line options to your bootloader -(eg: LILO), how to do that is beyond the scope of this document. - -The high-level drivers accept a number of command line parameters, all -of which are documented in the source files in linux/drivers/block/paride. -By default, each driver will automatically try all parallel ports it -can find, and all protocol types that have been installed, until it finds -a parallel port IDE adapter. Once it finds one, the probe stops. So, -if you have more than one device, you will need to tell the drivers -how to identify them. This requires specifying the port address, the -protocol identification number and, for some devices, the drive's -chain ID. While your system is booting, a number of messages are -displayed on the console. Like all such messages, they can be -reviewed with the 'dmesg' command. Among those messages will be -some lines like: - - paride: bpck registered as protocol 0 - paride: epat registered as protocol 1 - -The numbers will always be the same until you build a new kernel with -different protocol selections. You should note these numbers as you -will need them to identify the devices. - -If you happen to be using a MicroSolutions backpack device, you will -also need to know the unit ID number for each drive. This is usually -the last two digits of the drive's serial number (but read MicroSolutions' -documentation about this). - -As an example, let's assume that you have a MicroSolutions PD/CD drive -with unit ID number 36 connected to the parallel port at 0x378, a SyQuest -EZ-135 connected to the chained port on the PD/CD drive and also an -Imation Superdisk connected to port 0x278. You could give the following -options on your boot command: - - pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 - -In the last option, pf.drive1 configures device /dev/pf1, the 0x378 -is the parallel port base address, the 0 is the protocol registration -number and 36 is the chain ID. - -Please note: while PARIDE will work both with and without the -PARPORT parallel port sharing system that is included by the -"Parallel port support" option, PARPORT must be included and enabled -if you want to use chains of devices on the same parallel port. - -2.2 Loading and configuring PARIDE as modules - -It is much faster and simpler to get to understand the PARIDE drivers -if you use them as loadable kernel modules. - -Note 1: using these drivers with the "kerneld" automatic module loading -system is not recommended for beginners, and is not documented here. - -Note 2: if you build PARPORT support as a loadable module, PARIDE must -also be built as loadable modules, and PARPORT must be loaded before the -PARIDE modules. - -To use PARIDE, you must begin by - - insmod paride - -this loads a base module which provides a registry for the protocols, -among other tasks. - -Then, load as many of the protocol modules as you think you might need. -As you load each module, it will register the protocols that it supports, -and print a log message to your kernel log file and your console. For -example: - - # insmod epat - paride: epat registered as protocol 0 - # insmod kbic - paride: k951 registered as protocol 1 - paride: k971 registered as protocol 2 - -Finally, you can load high-level drivers for each kind of device that -you have connected. By default, each driver will autoprobe for a single -device, but you can support up to four similar devices by giving their -individual co-ordinates when you load the driver. - -For example, if you had two no-name CD-ROM drives both using the -KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc -you could give the following command: - - # insmod pcd drive0=0x378,1 drive1=0x3bc,1 - -For most adapters, giving a port address and protocol number is sufficient, -but check the source files in linux/drivers/block/paride for more -information. (Hopefully someone will write some man pages one day !). - -As another example, here's what happens when PARPORT is installed, and -a SyQuest EZ-135 is attached to port 0x378: - - # insmod paride - paride: version 1.0 installed - # insmod epat - paride: epat registered as protocol 0 - # insmod pd - pd: pd version 1.0, major 45, cluster 64, nice 0 - pda: Sharing parport1 at 0x378 - pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 - pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media - pda: pda1 - -Note that the last line is the output from the generic partition table -scanner - in this case it reports that it has found a disk with one partition. - -2.3 Using a PARIDE device - -Once the drivers have been loaded, you can access PARIDE devices in the -same way as their traditional counterparts. You will probably need to -create the device "special files". Here is a simple script that you can -cut to a file and execute: - -#!/bin/bash -# -# mkd -- a script to create the device special files for the PARIDE subsystem -# -function mkdev { - mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 -} -# -function pd { - D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) - mkdev pd$D b 45 $[ $1 * 16 ] - for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 - do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] - done -} -# -cd /dev -# -for u in 0 1 2 3 ; do pd $u ; done -for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done -for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done -for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done -for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done -for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done -# -# end of mkd - -With the device files and drivers in place, you can access PARIDE devices -like any other Linux device. For example, to mount a CD-ROM in pcd0, use: - - mount /dev/pcd0 /cdrom - -If you have a fresh Avatar Shark cartridge, and the drive is pda, you -might do something like: - - fdisk /dev/pda -- make a new partition table with - partition 1 of type 83 - - mke2fs /dev/pda1 -- to build the file system - - mkdir /shark -- make a place to mount the disk - - mount /dev/pda1 /shark - -Devices like the Imation superdisk work in the same way, except that -they do not have a partition table. For example to make a 120MB -floppy that you could share with a DOS system: - - mkdosfs /dev/pf0 - mount /dev/pf0 /mnt - - -2.4 The pf driver - -The pf driver is intended for use with parallel port ATAPI disk -devices. The most common devices in this category are PD drives -and LS-120 drives. Traditionally, media for these devices are not -partitioned. Consequently, the pf driver does not support partitioned -media. This may be changed in a future version of the driver. - -2.5 Using the pt driver - -The pt driver for parallel port ATAPI tape drives is a minimal driver. -It does not yet support many of the standard tape ioctl operations. -For best performance, a block size of 32KB should be used. You will -probably want to set the parallel port delay to 0, if you can. - -2.6 Using the pg driver - -The pg driver can be used in conjunction with the cdrecord program -to create CD-ROMs. Please get cdrecord version 1.6.1 or later -from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media -your parallel port should ideally be set to EPP mode, and the "port delay" -should be set to 0. With those settings it is possible to record at 2x -speed without any buffer underruns. If you cannot get the driver to work -in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. - - -3. Troubleshooting - -3.1 Use EPP mode if you can - -The most common problems that people report with the PARIDE drivers -concern the parallel port CMOS settings. At this time, none of the -PARIDE protocol modules support ECP mode, or any ECP combination modes. -If you are able to do so, please set your parallel port into EPP mode -using your CMOS setup procedure. - -3.2 Check the port delay - -Some parallel ports cannot reliably transfer data at full speed. To -offset the errors, the PARIDE protocol modules introduce a "port -delay" between each access to the i/o ports. Each protocol sets -a default value for this delay. In most cases, the user can override -the default and set it to 0 - resulting in somewhat higher transfer -rates. In some rare cases (especially with older 486 systems) the -default delays are not long enough. if you experience corrupt data -transfers, or unexpected failures, you may wish to increase the -port delay. The delay can be programmed using the "driveN" parameters -to each of the high-level drivers. Please see the notes above, or -read the comments at the beginning of the driver source files in -linux/drivers/block/paride. - -3.3 Some drives need a printer reset - -There appear to be a number of "noname" external drives on the market -that do not always power up correctly. We have noticed this with some -drives based on OnSpec and older Freecom adapters. In these rare cases, -the adapter can often be reinitialised by issuing a "printer reset" on -the parallel port. As the reset operation is potentially disruptive in -multiple device environments, the PARIDE drivers will not do it -automatically. You can however, force a printer reset by doing: - - insmod lp reset=1 - rmmod lp - -If you have one of these marginal cases, you should probably build -your paride drivers as modules, and arrange to do the printer reset -before loading the PARIDE drivers. - -3.4 Use the verbose option and dmesg if you need help - -While a lot of testing has gone into these drivers to make them work -as smoothly as possible, problems will arise. If you do have problems, -please check all the obvious things first: does the drive work in -DOS with the manufacturer's drivers ? If that doesn't yield any useful -clues, then please make sure that only one drive is hooked to your system, -and that either (a) PARPORT is enabled or (b) no other device driver -is using your parallel port (check in /proc/ioports). Then, load the -appropriate drivers (you can load several protocol modules if you want) -as in: - - # insmod paride - # insmod epat - # insmod bpck - # insmod kbic - ... - # insmod pd verbose=1 - -(using the correct driver for the type of device you have, of course). -The verbose=1 parameter will cause the drivers to log a trace of their -activity as they attempt to locate your drive. - -Use 'dmesg' to capture a log of all the PARIDE messages (any messages -beginning with paride:, a protocol module's name or a driver's name) and -include that with your bug report. You can submit a bug report in one -of two ways. Either send it directly to the author of the PARIDE suite, -by e-mail to grant@torque.net, or join the linux-parport mailing list -and post your report there. - -3.5 For more information or help - -You can join the linux-parport mailing list by sending a mail message -to - linux-parport-request@torque.net - -with the single word - - subscribe - -in the body of the mail message (not in the subject line). Please be -sure that your mail program is correctly set up when you do this, as -the list manager is a robot that will subscribe you using the reply -address in your mail headers. REMOVE any anti-spam gimmicks you may -have in your mail headers, when sending mail to the list server. - -You might also find some useful information on the linux-parport -web pages (although they are not always up to date) at - - http://www.torque.net/parport/ - - diff --git a/Documentation/ramdisk.txt b/Documentation/ramdisk.txt deleted file mode 100644 index 6c820ba..0000000 --- a/Documentation/ramdisk.txt +++ /dev/null @@ -1,165 +0,0 @@ -Using the RAM disk block device with Linux ------------------------------------------- - -Contents: - - 1) Overview - 2) Kernel Command Line Parameters - 3) Using "rdev -r" - 4) An Example of Creating a Compressed RAM Disk - - -1) Overview ------------ - -The RAM disk driver is a way to use main system memory as a block device. It -is required for initrd, an initial filesystem used if you need to load modules -in order to access the root filesystem (see Documentation/initrd.txt). It can -also be used for a temporary filesystem for crypto work, since the contents -are erased on reboot. - -The RAM disk dynamically grows as more space is required. It does this by using -RAM from the buffer cache. The driver marks the buffers it is using as dirty -so that the VM subsystem does not try to reclaim them later. - -The RAM disk supports up to 16 RAM disks by default, and can be reconfigured -to support an unlimited number of RAM disks (at your own risk). Just change -the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu -and (re)build the kernel. - -To use RAM disk support with your system, run './MAKEDEV ram' from the /dev -directory. RAM disks are all major number 1, and start with minor number 0 -for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. - -The new RAM disk also has the ability to load compressed RAM disk images, -allowing one to squeeze more programs onto an average installation or -rescue floppy disk. - - -2) Kernel Command Line Parameters ---------------------------------- - - ramdisk_size=N - ============== - -This parameter tells the RAM disk driver to set up RAM disks of N k size. The -default is 4096 (4 MB) (8192 (8 MB) on S390). - - ramdisk_blocksize=N - =================== - -This parameter tells the RAM disk driver how many bytes to use per block. The -default is 1024 (BLOCK_SIZE). - - -3) Using "rdev -r" ------------------- - -The usage of the word (two bytes) that "rdev -r" sets in the kernel image is -as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up -to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit -14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a -prompt/wait sequence is to be given before trying to read the RAM disk. Since -the RAM disk dynamically grows as data is being written into it, a size field -is not required. Bits 11 to 13 are not currently used and may as well be zero. -These numbers are no magical secrets, as seen below: - -./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF -./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 -./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 - -Consider a typical two floppy disk setup, where you will have the -kernel on disk one, and have already put a RAM disk image onto disk #2. - -Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk -starts at an offset of 0 kB from the beginning of the floppy. -The command line equivalent is: "ramdisk_start=0" - -You want bit 14 as one, indicating that a RAM disk is to be loaded. -The command line equivalent is: "load_ramdisk=1" - -You want bit 15 as one, indicating that you want a prompt/keypress -sequence so that you have a chance to switch floppy disks. -The command line equivalent is: "prompt_ramdisk=1" - -Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. -So to create disk one of the set, you would do: - - /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 - /usr/src/linux# rdev /dev/fd0 /dev/fd0 - /usr/src/linux# rdev -r /dev/fd0 49152 - -If you make a boot disk that has LILO, then for the above, you would use: - append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" -Since the default start = 0 and the default prompt = 1, you could use: - append = "load_ramdisk=1" - - -4) An Example of Creating a Compressed RAM Disk ----------------------------------------------- - -To create a RAM disk image, you will need a spare block device to -construct it on. This can be the RAM disk device itself, or an -unused disk partition (such as an unmounted swap partition). For this -example, we will use the RAM disk device, "/dev/ram0". - -Note: This technique should not be done on a machine with less than 8 MB -of RAM. If using a spare disk partition instead of /dev/ram0, then this -restriction does not apply. - -a) Decide on the RAM disk size that you want. Say 2 MB for this example. - Create it by writing to the RAM disk device. (This step is not currently - required, but may be in the future.) It is wise to zero out the - area (esp. for disks) so that maximal compression is achieved for - the unused blocks of the image that you are about to create. - - dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 - -b) Make a filesystem on it. Say ext2fs for this example. - - mke2fs -vm0 /dev/ram0 2048 - -c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) - and unmount it again. - -d) Compress the contents of the RAM disk. The level of compression - will be approximately 50% of the space used by the files. Unused - space on the RAM disk will compress to almost nothing. - - dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz - -e) Put the kernel onto the floppy - - dd if=zImage of=/dev/fd0 bs=1k - -f) Put the RAM disk image onto the floppy, after the kernel. Use an offset - that is slightly larger than the kernel, so that you can put another - (possibly larger) kernel onto the same floppy later without overlapping - the RAM disk image. An offset of 400 kB for kernels about 350 kB in - size would be reasonable. Make sure offset+size of ram_image.gz is - not larger than the total space on your floppy (usually 1440 kB). - - dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 - -g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. - For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would - have 2^15 + 2^14 + 400 = 49552. - - rdev /dev/fd0 /dev/fd0 - rdev -r /dev/fd0 49552 - -That is it. You now have your boot/root compressed RAM disk floppy. Some -users may wish to combine steps (d) and (f) by using a pipe. - --------------------------------------------------------------------------- - Paul Gortmaker 12/95 - -Changelog: ----------- - -10-22-04 : Updated to reflect changes in command line options, remove - obsolete references, general cleanup. - James Nelson (james4765@gmail.com) - - -12-95 : Original Document diff --git a/Documentation/riscom8.txt b/Documentation/riscom8.txt deleted file mode 100644 index 14f61fd..0000000 --- a/Documentation/riscom8.txt +++ /dev/null @@ -1,36 +0,0 @@ -* NOTE - this is an unmaintained driver. The original author cannot be located. - -SDL Communications is now SBS Technologies, and does not have any -information on these ancient ISA cards on their website. - -James Nelson - 12-12-2004 - - This is the README for RISCom/8 multi-port serial driver - (C) 1994-1996 D.Gorodchanin - See file LICENSE for terms and conditions. - -NOTE: English is not my native language. - I'm sorry for any mistakes in this text. - -Misc. notes for RISCom/8 serial driver, in no particular order :) - -1) This driver can support up to 4 boards at time. - Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for - setting I/O base addresses for boards. If you compile driver - as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." - -2) The driver partially supports famous 'setserial' program, you can use almost - any of its options, excluding port & irq settings. - -3) There are some misc. defines at the beginning of riscom8.c, please read the - comments and try to change some of them in case of problems. - -4) I consider the current state of the driver as BETA. - -5) SDL Communications WWW page is http://www.sdlcomm.com. - -6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. - -7) Minor numbers for first board are 0-7, for second 8-15, etc. - -22 Apr 1996. diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt deleted file mode 100644 index 1d85829..0000000 --- a/Documentation/rocket.txt +++ /dev/null @@ -1,189 +0,0 @@ -Comtrol(tm) RocketPort(R)/RocketModem(TM) Series -Device Driver for the Linux Operating System - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -PRODUCT OVERVIEW ----------------- - -This driver provides a loadable kernel driver for the Comtrol RocketPort -and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 -high-speed serial ports or modems. This driver supports up to a combination -of four RocketPort or RocketModems boards in one machine simultaneously. -This file assumes that you are using the RocketPort driver which is -integrated into the kernel sources. - -The driver can also be installed as an external module using the usual -"make;make install" routine. This external module driver, obtainable -from the Comtrol website listed below, is useful for updating the driver -or installing it into kernels which do not have the driver configured -into them. Installations instructions for the external module -are in the included README and HW_INSTALL files. - -RocketPort ISA and RocketModem II PCI boards currently are only supported by -this driver in module form. - -The RocketPort ISA board requires I/O ports to be configured by the DIP -switches on the board. See the section "ISA Rocketport Boards" below for -information on how to set the DIP switches. - -You pass the I/O port to the driver using the following module parameters: - -board1 : I/O port for the first ISA board -board2 : I/O port for the second ISA board -board3 : I/O port for the third ISA board -board4 : I/O port for the fourth ISA board - -There is a set of utilities and scripts provided with the external driver -( downloadable from http://www.comtrol.com ) that ease the configuration and -setup of the ISA cards. - -The RocketModem II PCI boards require firmware to be loaded into the card -before it will function. The driver has only been tested as a module for this -board. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -INSTALLATION PROCEDURES ------------------------ - -RocketPort/RocketModem PCI cards require no driver configuration, they are -automatically detected and configured. - -The RocketPort driver can be installed as a module (recommended) or built -into the kernel. This is selected, as for other drivers, through the `make config` -command from the root of the Linux source tree during the kernel build process. - -The RocketPort/RocketModem serial ports installed by this driver are assigned -device major number 46, and will be named /dev/ttyRx, where x is the port number -starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards -installed in the system, the mapping of port names to serial ports is displayed -in the system log at /var/log/messages. - -If installed as a module, the module must be loaded. This can be done -manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit the /etc/modprobe.conf file and add the line -"alias char-major-46 rocket". - -In order to use the ports, their device names (nodes) must be created with mknod. -This is only required once, the system will retain the names once created. To -create the RocketPort/RocketModem device names, use the command -"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: - ->mknod /dev/ttyR0 c 46 0 ->mknod /dev/ttyR1 c 46 1 ->mknod /dev/ttyR2 c 46 2 - -The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) -for you: - ->/dev/MAKEDEV ttyR - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -ISA Rocketport Boards ---------------------- - -You must assign and configure the I/O addresses used by the ISA Rocketport -card before installing and using it. This is done by setting a set of DIP -switches on the Rocketport board. - - -SETTING THE I/O ADDRESS ------------------------ - -Before installing RocketPort(R) or RocketPort RA boards, you must find -a range of I/O addresses for it to use. The first RocketPort card -requires a 68-byte contiguous block of I/O addresses, starting at one -of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, -0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switches of *all* of the Rocketport cards. - -The second, third, and fourth RocketPort cards require a 64-byte -contiguous block of I/O addresses, starting at one of the following -I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, -0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the -second, third, and fourth Rocketport cards (if present) are set via -software control. The DIP switch settings for the I/O address must be -set to the value of the first Rocketport cards. - -In order to distinguish each of the card from the others, each card -must have a unique board ID set on the dip switches. The first -Rocketport board must be set with the DIP switches corresponding to -the first board, the second board must be set with the DIP switches -corresponding to the second board, etc. IMPORTANT: The board ID is -the only place where the DIP switch settings should differ between the -various Rocketport boards in a system. - -The I/O address range used by any of the RocketPort cards must not -conflict with any other cards in the system, including other -RocketPort cards. Below, you will find a list of commonly used I/O -address ranges which may be in use by other devices in your system. -On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devices on your -system. - -Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it -for 0x100, it will occupy 0x100 to 0x143. This would mean that you -CAN NOT set the second, third or fourth board for address 0x140 since -the first 4 bytes of that range are used by the first board. You would -need to set the second, third, or fourth board to one of the next available -blocks such as 0x180. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -RocketPort and RocketPort RA SW1 Settings: - - +-------------------------------+ - | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | - +-------+-------+---------------+ - | Unused| Card | I/O Port Block| - +-------------------------------+ - -DIP Switches DIP Switches -7 8 6 5 -=================== =================== -On On UNUSED, MUST BE ON. On On First Card <==== Default - On Off Second Card - Off On Third Card - Off Off Fourth Card - -DIP Switches I/O Address Range -4 3 2 1 Used by the First Card -===================================== -On Off On Off 100-143 -On Off Off On 140-183 -On Off Off Off 180-1C3 <==== Default -Off On On Off 200-243 -Off On Off On 240-283 -Off On Off Off 280-2C3 -Off Off On Off 300-343 -Off Off Off On 340-383 -Off Off Off Off 380-3C3 - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -REPORTING BUGS --------------- - -For technical support, please provide the following -information: Driver version, kernel release, distribution of -kernel, and type of board you are using. Error messages and log -printouts port configuration details are especially helpful. - -USA - Phone: (612) 494-4100 - FAX: (612) 494-4199 - email: support@comtrol.com - -Comtrol Europe - Phone: +44 (0) 1 869 323-220 - FAX: +44 (0) 1 869 323-211 - email: support@comtrol.co.uk - -Web: http://www.comtrol.com -FTP: ftp.comtrol.com - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX new file mode 100644 index 0000000..07dcdb0 --- /dev/null +++ b/Documentation/serial/00-INDEX @@ -0,0 +1,24 @@ +00-INDEX + - this file. +README.cycladesZ + - info on Cyclades-Z firmware loading. +computone.txt + - info on Computone Intelliport II/Plus Multiport Serial Driver. +digiepca.txt + - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. +hayes-esp.txt + - info on using the Hayes ESP serial driver. +moxa-smartio + - file with info on installing/using Moxa multiport serial driver. +riscom8.txt + - notes on using the RISCom/8 multi-port serial driver. +rocket.txt + - info on the Comtrol RocketPort multiport serial driver. +specialix.txt + - info on hardware/driver for specialix IO8+ multiport serial card. +stallion.txt + - info on using the Stallion multiport serial driver. +sx.txt + - info on the Specialix SX/SI multiport serial driver. +tty.txt + - guide to the locking policies of the tty layer. diff --git a/Documentation/serial/README.cycladesZ b/Documentation/serial/README.cycladesZ new file mode 100644 index 0000000..024a694 --- /dev/null +++ b/Documentation/serial/README.cycladesZ @@ -0,0 +1,8 @@ + +The Cyclades-Z must have firmware loaded onto the card before it will +operate. This operation should be performed during system startup, + +The firmware, loader program and the latest device driver code are +available from Cyclades at + ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ + diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt new file mode 100644 index 0000000..c57ea47 --- /dev/null +++ b/Documentation/serial/computone.txt @@ -0,0 +1,522 @@ +NOTE: This is an unmaintained driver. It is not guaranteed to work due to +changes made in the tty layer in 2.6. If you wish to take over maintenance of +this driver, contact Michael Warfield . + +Changelog: +---------- +11-01-2001: Original Document + +10-29-2004: Minor misspelling & format fix, update status of driver. + James Nelson + +Computone Intelliport II/Plus Multiport Serial Driver +----------------------------------------------------- + +Release Notes For Linux Kernel 2.2 and higher. +These notes are for the drivers which have already been integrated into the +kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. + +Version: 1.2.14 +Date: 11/01/2001 +Historical Author: Andrew Manison +Primary Author: Doug McNash +Support: support@computone.com +Fixes and Updates: Mike Warfield + +This file assumes that you are using the Computone drivers which are +integrated into the kernel sources. For updating the drivers or installing +drivers into kernels which do not already have Computone drivers, please +refer to the instructions in the README.computone file in the driver patch. + + +1. INTRODUCTION + +This driver supports the entire family of Intelliport II/Plus controllers +with the exception of the MicroChannel controllers. It does not support +products previous to the Intelliport II. + +This driver was developed on the v2.0.x Linux tree and has been tested up +to v2.4.14; it will probably not work with earlier v1.X kernels,. + + +2. QUICK INSTALLATION + +Hardware - If you have an ISA card, find a free interrupt and io port. + List those in use with `cat /proc/interrupts` and + `cat /proc/ioports`. Set the card dip switches to a free + address. You may need to configure your BIOS to reserve an + irq for an ISA card. PCI and EISA parameters are set + automagically. Insert card into computer with the power off + before or after drivers installation. + + Note the hardware address from the Computone ISA cards installed into + the system. These are required for editing ip2.c or editing + /etc/modprobe.conf, or for specification on the modprobe + command line. + + Note that the /etc/modules.conf should be used for older (pre-2.6) + kernels. + +Software - + +Module installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (m) module for CONFIG_COMPUTONE under character + devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c if needed + or + edit /etc/modprobe.conf if needed (module). + or both to match this setting. +d) Run "make modules" +e) Run "make modules_install" +f) Run "/sbin/depmod -a" +g) install driver using `modprobe ip2 ` (options listed below) +h) run ip2mkdev (either the script below or the binary version) + + +Kernel installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (y) kernel for CONFIG_COMPUTONE under character + devices. CONFIG_PCI may need to be set if you have PCI bus. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c + (Optional - may be specified on kernel command line now) +d) Run "make zImage" or whatever target you prefer. +e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. +f) Add new config for this kernel into /etc/lilo.conf, run "lilo" + or copy to a floppy disk and boot from that floppy disk. +g) Reboot using this kernel +h) run ip2mkdev (either the script below or the binary version) + +Kernel command line options: + +When compiling the driver into the kernel, io and irq may be +compiled into the driver by editing ip2.c and setting the values for +io and irq in the appropriate array. An alternative is to specify +a command line parameter to the kernel at boot up. + + ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + +Note that this order is very different from the specifications for the +modload parameters which have separate IRQ and IO specifiers. + +The io port also selects PCI (1) and EISA (2) boards. + + io=0 No board + io=1 PCI board + io=2 EISA board + else ISA board io address + +You only need to specify the boards which are present. + + Examples: + + 2 PCI boards: + + ip2=1,0,1,0 + + 1 ISA board at 0x310 irq 5: + + ip2=0x310,5 + +This can be added to and "append" option in lilo.conf similar to this: + + append="ip2=1,0,1,0" + + +3. INSTALLATION + +Previously, the driver sources were packaged with a set of patch files +to update the character drivers' makefile and configuration file, and other +kernel source files. A build script (ip2build) was included which applies +the patches if needed, and build any utilities needed. +What you receive may be a single patch file in conventional kernel +patch format build script. That form can also be applied by +running patch -p1 < ThePatchFile. Otherwise run ip2build. + +The driver can be installed as a module (recommended) or built into the +kernel. This is selected as for other drivers through the `make config` +command from the root of the Linux source tree. If the driver is built +into the kernel you will need to edit the file ip2.c to match the boards +you are installing. See that file for instructions. If the driver is +installed as a module the configuration can also be specified on the +modprobe command line as follows: + + modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 + +where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, +12,15) and addr1-4 are the base addresses for up to four controllers. If +the irqs are not specified the driver uses the default in ip2.c (which +selects polled mode). If no base addresses are specified the defaults in +ip2.c are used. If you are autoloading the driver module with kerneld or +kmod the base addresses and interrupt number must also be set in ip2.c +and recompile or just insert and options line in /etc/modprobe.conf or both. +The options line is equivalent to the command line and takes precedence over +what is in ip2.c. + +/etc/modprobe.conf sample: + options ip2 io=1,0x328 irq=1,10 + alias char-major-71 ip2 + alias char-major-72 ip2 + alias char-major-73 ip2 + +The equivalent in ip2.c: + +static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; + +The equivalent for the kernel command line (in lilo.conf): + + append="ip2=1,1,0x328,10" + + +Note: Both io and irq should be updated to reflect YOUR system. An "io" + address of 1 or 2 indicates a PCI or EISA card in the board table. + The PCI or EISA irq will be assigned automatically. + +Specifying an invalid or in-use irq will default the driver into +running in polled mode for that card. If all irq entries are 0 then +all cards will operate in polled mode. + +If you select the driver as part of the kernel run : + + make zlilo (or whatever you do to create a bootable kernel) + +If you selected a module run : + + make modules && make modules_install + +The utility ip2mkdev (see 5 and 7 below) creates all the device nodes +required by the driver. For a device to be created it must be configured +in the driver and the board must be installed. Only devices corresponding +to real IntelliPort II ports are created. With multiple boards and expansion +boxes this will leave gaps in the sequence of device names. ip2mkdev uses +Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and +cuf0 - cuf255 for callout devices. + + +4. USING THE DRIVERS + +As noted above, the driver implements the ports in accordance with Linux +conventions, and the devices should be interchangeable with the standard +serial devices. (This is a key point for problem reporting: please make +sure that what you are trying do works on the ttySx/cuax ports first; then +tell us what went wrong with the ip2 ports!) + +Higher speeds can be obtained using the setserial utility which remaps +38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. +Intelliport II installations using the PowerPort expansion module can +use the custom speed setting to select the highest speeds: 153,600 bps, +230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for +custom baud rate configuration is fixed at 921,600 for cards/expansion +modules with ST654's and 115200 for those with Cirrus CD1400's. This +corresponds to the maximum bit rates those chips are capable. +For example if the baud base is 921600 and the baud divisor is 18 then +the custom rate is 921600/18 = 51200 bps. See the setserial man page for +complete details. Of course if stty accepts the higher rates now you can +use that as well as the standard ioctls(). + + +5. ip2mkdev and assorted utilities... + +Several utilities, including the source for a binary ip2mkdev utility are +available under .../drivers/char/ip2. These can be build by changing to +that directory and typing "make" after the kernel has be built. If you do +not wish to compile the binary utilities, the shell script below can be +cut out and run as "ip2mkdev" to create the necessary device files. To +use the ip2mkdev script, you must have procfs enabled and the proc file +system mounted on /proc. + + +6. NOTES + +This is a release version of the driver, but it is impossible to test it +in all configurations of Linux. If there is any anomalous behaviour that +does not match the standard serial port's behaviour please let us know. + + +7. ip2mkdev shell script + +Previously, this script was simply attached here. It is now attached as a +shar archive to make it easier to extract the script from the documentation. +To create the ip2mkdev shell script change to a convenient directory (/tmp +works just fine) and run the following command: + + unshar Documentation/serial/computone.txt + (This file) + +You should now have a file ip2mkdev in your current working directory with +permissions set to execute. Running that script with then create the +necessary devices for the Computone boards, interfaces, and ports which +are present on you system at the time it is run. + + +#!/bin/sh +# This is a shell archive (produced by GNU sharutils 4.2.1). +# To extract the files from this archive, save it to some FILE, remove +# everything before the `!/bin/sh' line above, then type `sh FILE'. +# +# Made on 2001-10-29 10:32 EST by . +# Source directory was `/home2/src/tmp'. +# +# Existing files will *not* be overwritten unless `-c' is specified. +# +# This shar contains: +# length mode name +# ------ ---------- ------------------------------------------ +# 4251 -rwxr-xr-x ip2mkdev +# +save_IFS="${IFS}" +IFS="${IFS}:" +gettext_dir=FAILED +locale_dir=FAILED +first_param="$1" +for dir in $PATH +do + if test "$gettext_dir" = FAILED && test -f $dir/gettext \ + && ($dir/gettext --version >/dev/null 2>&1) + then + set `$dir/gettext --version 2>&1` + if test "$3" = GNU + then + gettext_dir=$dir + fi + fi + if test "$locale_dir" = FAILED && test -f $dir/shar \ + && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) + then + locale_dir=`$dir/shar --print-text-domain-dir` + fi +done +IFS="$save_IFS" +if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED +then + echo=echo +else + TEXTDOMAINDIR=$locale_dir + export TEXTDOMAINDIR + TEXTDOMAIN=sharutils + export TEXTDOMAIN + echo="$gettext_dir/gettext -s" +fi +if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then + shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' +elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' +elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$2 "$8"' +else + shar_touch=: + echo + $echo 'WARNING: not restoring timestamps. Consider getting and' + $echo "installing GNU \`touch', distributed in GNU File Utilities..." + echo +fi +rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch +# +if mkdir _sh17581; then + $echo 'x -' 'creating lock directory' +else + $echo 'failed to create lock directory' + exit 1 +fi +# ============= ip2mkdev ============== +if test -f 'ip2mkdev' && test "$first_param" != -c; then + $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' +else + $echo 'x -' extracting 'ip2mkdev' '(text)' + sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && +#!/bin/sh - +# +# ip2mkdev +# +# Make or remove devices as needed for Computone Intelliport drivers +# +# First rule! If the dev file exists and you need it, don't mess +# with it. That prevents us from screwing up open ttys, ownership +# and permissions on a running system! +# +# This script will NOT remove devices that no longer exist if their +# board or interface box has been removed. If you want to get rid +# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" +# before running this script. Running this script will then recreate +# all the valid devices. +# +# Michael H. Warfield +# /\/\|=mhw=|\/\/ +# mhw@wittsend.com +# +# Updated 10/29/2000 for version 1.2.13 naming convention +# under devfs. /\/\|=mhw=|\/\/ +# +# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ +# +X +if test -d /dev/ip2 ; then +# This is devfs mode... We don't do anything except create symlinks +# from the real devices to the old names! +X cd /dev +X echo "Creating symbolic links to devfs devices" +X for i in `ls ip2` ; do +X if test ! -L ip2$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f ip2$i +X ln -s ip2/$i ip2$i +X fi +X done +X for i in `( cd tts ; ls F* )` ; do +X if test ! -L tty$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f tty$i +X ln -s tts/$i tty$i +X fi +X done +X for i in `( cd cua ; ls F* )` ; do +X DEVNUMBER=`expr $i : 'F\(.*\)'` +X if test ! -L cuf$DEVNUMBER ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f cuf$DEVNUMBER +X ln -s cua/$i cuf$DEVNUMBER +X fi +X done +X exit 0 +fi +X +if test ! -f /proc/tty/drivers +then +X echo "\ +Unable to check driver status. +Make sure proc file system is mounted." +X +X exit 255 +fi +X +if test ! -f /proc/tty/driver/ip2 +then +X echo "\ +Unable to locate ip2 proc file. +Attempting to load driver" +X +X if /sbin/insmod ip2 +X then +X if test ! -f /proc/tty/driver/ip2 +X then +X echo "\ +Unable to locate ip2 proc file after loading driver. +Driver initialization failure or driver version error. +" +X exit 255 +X fi +X else +X echo "Unable to load ip2 driver." +X exit 255 +X fi +fi +X +# Ok... So we got the driver loaded and we can locate the procfs files. +# Next we need our major numbers. +X +TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` +X +echo "\ +TTYMAJOR = $TTYMAJOR +CUAMAJOR = $CUAMAJOR +BRDMAJOR = $BRDMAJOR +" +X +# Ok... Now we should know our major numbers, if appropriate... +# Now we need our boards and start the device loops. +X +grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest +do +X # The test for blank "type" will catch the stats lead-in lines +X # if they exist in the file +X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" +X then +X continue +X fi +X +X BOARDNO=`expr "$number" : '\([0-9]\):'` +X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` +X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` +X +X if test "$BOARDNO" = "" -o "$PORTS" = "" +X then +# This may be a bug. We should at least get this much information +X echo "Unable to process board line" +X continue +X fi +X +X if test "$MINORS" = "" +X then +# Silently skip this one. This board seems to have no boxes +X continue +X fi +X +X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" +X +X if test "$BRDMAJOR" != "" +X then +X BRDMINOR=`expr $BOARDNO \* 4` +X STSMINOR=`expr $BRDMINOR + 1` +X if test ! -c /dev/ip2ipl$BOARDNO ; then +X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR +X fi +X if test ! -c /dev/ip2stat$BOARDNO ; then +X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR +X fi +X fi +X +X if test "$TTYMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/ttyF$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO +X fi +X done +X fi +X +X if test "$CUAMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/cuf$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO +X fi +X done +X fi +done +X +Xexit 0 +SHAR_EOF + (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && + chmod 0755 'ip2mkdev' || + $echo 'restore of' 'ip2mkdev' 'failed' + if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ + && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then + md5sum -c << SHAR_EOF >/dev/null 2>&1 \ + || $echo 'ip2mkdev:' 'MD5 check failed' +cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev +SHAR_EOF + else + shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" + test 4251 -eq "$shar_count" || + $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" + fi +fi +rm -fr _sh17581 +exit 0 diff --git a/Documentation/serial/digiepca.txt b/Documentation/serial/digiepca.txt new file mode 100644 index 0000000..f2560e2 --- /dev/null +++ b/Documentation/serial/digiepca.txt @@ -0,0 +1,98 @@ +NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at +http://www.digi.com for PCI cards. They no longer maintain this driver, +and have no 2.6 driver for ISA cards. + +This driver requires a number of user-space tools. They can be acquired from +http://www.digi.com, but only works with 2.4 kernels. + + +The Digi Intl. epca driver. +---------------------------- +The Digi Intl. epca driver for Linux supports the following boards: + +Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve +Digi EISA/Xem, PCI/Xem, PCI/Xr + +Limitations: +------------ +Currently the driver only autoprobes for supported PCI boards. + +The Linux MAKEDEV command does not support generating the Digiboard +Devices. Users executing digiConfig to setup EISA and PC series cards +will have their device nodes automatically constructed (cud?? for ~CLOCAL, +and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO +prompt, or those users booting PCI cards may use buildDIGI to construct +the necessary nodes. + +Notes: +------ +This driver may be configured via LILO. For users who have already configured +their driver using digiConfig, configuring from LILO will override previous +settings. Multiple boards may be configured by issuing multiple LILO command +lines. For examples see the bottom of this document. + +Device names start at 0 and continue up. Beware of this as previous Digi +drivers started device names with 1. + +PCI boards are auto-detected and configured by the driver. PCI boards will +be allocated device numbers (internally) beginning with the lowest PCI slot +first. In other words a PCI card in slot 3 will always have higher device +nodes than a PCI card in slot 1. + +LILO config examples: +--------------------- +Using LILO's APPEND command, a string of comma separated identifiers or +integers can be used to configure supported boards. The six values in order +are: + + Enable/Disable this card or Override, + Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), + EISA/Xem (3), PC/64Xe (4), PC/Xi (5), + Enable/Disable alternate pin arrangement, + Number of ports on this card, + I/O Port where card is configured (in HEX if using string identifiers), + Base of memory window (in HEX if using string identifiers), + +NOTE : PCI boards are auto-detected and configured. Do not attempt to +configure PCI boards with the LILO append command. If you wish to override +previous configuration data (As set by digiConfig), but you do not wish to +configure any specific card (Example if there are PCI cards in the system) +the following override command will accomplish this: +-> append="digi=2" + +Samples: + append="digiepca=E,PC/Xe,D,16,200,D0000" + or + append="digi=1,0,0,16,512,851968" + +Supporting Tools: +----------------- +Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See +drivers/char/README.epca for more details. Note, +this driver REQUIRES that digiDload be executed prior to it being used. +Failure to do this will result in an ENODEV error. + +Documentation: +-------------- +Complete documentation for this product may be found in the tool package. + +Sources of information and support: +----------------------------------- +Digi Intl. support site for this product: + +-> http://www.digi.com + +Acknowledgments: +---------------- +Much of this work (And even text) was derived from a similar document +supporting the original public domain DigiBoard driver Copyright (C) +1994,1995 Troy De Jongh. Many thanks to Christoph Lameter +(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored +and contributed to the original document. + +Changelog: +---------- +10-29-04: Update status of driver, remove dead links in document + James Nelson + +2000 (?) Original Document diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt new file mode 100644 index 0000000..09b5d58 --- /dev/null +++ b/Documentation/serial/hayes-esp.txt @@ -0,0 +1,154 @@ +HAYES ESP DRIVER VERSION 2.1 + +A big thanks to the people at Hayes, especially Alan Adamson. Their support +has enabled me to provide enhancements to the driver. + +Please report your experiences with this driver to me (arobinso@nyx.net). I +am looking for both positive and negative feedback. + +*** IMPORTANT CHANGES FOR 2.1 *** +Support for PIO mode. Five situations will cause PIO mode to be used: +1) A multiport card is detected. PIO mode will always be used. (8 port cards +do not support DMA). +2) The DMA channel is set to an invalid value (anything other than 1 or 3). +3) The DMA buffer/channel could not be allocated. The port will revert to PIO +mode until it is reopened. +4) Less than a specified number of bytes need to be transferred to/from the +FIFOs. PIO mode will be used for that transfer only. +5) A port needs to do a DMA transfer and another port is already using the +DMA channel. PIO mode will be used for that transfer only. + +Since the Hayes ESP seems to conflict with other cards (notably sound cards) +when using DMA, DMA is turned off by default. To use DMA, it must be turned +on explicitly, either with the "dma=" option described below or with +setserial. A multiport card can be forced into DMA mode by using setserial; +however, most multiport cards don't support DMA. + +The latest version of setserial allows the enhanced configuration of the ESP +card to be viewed and modified. +*** + +This package contains the files needed to compile a module to support the Hayes +ESP card. The drivers are basically a modified version of the serial drivers. + +Features: + +- Uses the enhanced mode of the ESP card, allowing a wider range of + interrupts and features than compatibility mode +- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, + reducing CPU load +- Supports primary and secondary ports + + +If the driver is compiled as a module, the IRQs to use can be specified by +using the irq= option. The format is: + +irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] + +The address in brackets is the base address of the card. The IRQ of +nonexistent cards can be set to 0. If an IRQ of a card that does exist is set +to 0, the driver will attempt to guess at the correct IRQ. For example, to set +the IRQ of the card at address 0x300 to 12, the insmod command would be: + +insmod esp irq=0,0,0,0,0,0,12,0 + +The custom divisor can be set by using the divisor= option. The format is the +same as for the irq= option. Each divisor value is a series of hex digits, +with each digit representing the divisor to use for a corresponding port. The +divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value +will automatically set the spd_cust flag. To calculate the divisor to use for +a certain baud rate, divide the port's base baud (generally 921600) by the +desired rate. For example, to set the divisor of the primary port at 0x300 to +4 and the divisor of the secondary port at 0x308 to 8, the insmod command would +be: + +insmod esp divisor=0,0,0,0,0,0,0x84,0 + +The dma= option can be used to set the DMA channel. The channel can be either +1 or 3. Specifying any other value will force the driver to use PIO mode. +For example, to set the DMA channel to 3, the insmod command would be: + +insmod esp dma=3 + +The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger +levels. They specify when the ESP card should send an interrupt. Larger +values will decrease the number of interrupts; however, a value too high may +result in data loss. Valid values are 1 through 1023, with 768 being the +default. For example, to set the receive trigger level to 512 bytes and the +transmit trigger level to 700 bytes, the insmod command would be: + +insmod esp rx_trigger=512 tx_trigger=700 + +The flow_off= and flow_on= options can be used to set the hardware flow off/ +flow on levels. The flow on level must be lower than the flow off level, and +the flow off level should be higher than rx_trigger. Valid values are 1 +through 1023, with 1016 being the default flow off level and 944 being the +default flow on level. For example, to set the flow off level to 1000 bytes +and the flow on level to 935 bytes, the insmod command would be: + +insmod esp flow_off=1000 flow_on=935 + +The rx_timeout= option can be used to set the receive timeout value. This +value indicates how long after receiving the last character that the ESP card +should wait before signalling an interrupt. Valid values are 0 though 255, +with 128 being the default. A value too high will increase latency, and a +value too low will cause unnecessary interrupts. For example, to set the +receive timeout to 255, the insmod command would be: + +insmod esp rx_timeout=255 + +The pio_threshold= option sets the threshold (in number of characters) for +using PIO mode instead of DMA mode. For example, if this value is 32, +transfers of 32 bytes or less will always use PIO mode. + +insmod esp pio_threshold=32 + +Multiple options can be listed on the insmod command line by separating each +option with a space. For example: + +insmod esp dma=3 trigger=512 + +The esp module can be automatically loaded when needed. To cause this to +happen, add the following lines to /etc/modprobe.conf (replacing the last line +with options for your configuration): + +alias char-major-57 esp +alias char-major-58 esp +options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 + +You may also need to run 'depmod -a'. + +Devices must be created manually. To create the devices, note the output from +the module after it is inserted. The output will appear in the location where +kernel messages usually appear (usually /var/adm/messages). Create two devices +for each 'tty' mentioned, one with major of 57 and the other with major of 58. +The minor number should be the same as the tty number reported. The commands +would be (replace ? with the tty number): + +mknod /dev/ttyP? c 57 ? +mknod /dev/cup? c 58 ? + +For example, if the following line appears: + +Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port + +...two devices should be created: + +mknod /dev/ttyP8 c 57 8 +mknod /dev/cup8 c 58 8 + +You may need to set the permissions on the devices: + +chmod 666 /dev/ttyP* +chmod 666 /dev/cup* + +The ESP module and the serial module should not conflict (they can be used at +the same time). After the ESP module has been loaded the ports on the ESP card +will no longer be accessible by the serial driver. + +If I/O errors are experienced when accessing the port, check for IRQ and DMA +conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and +DMAs currently in use). + +Enjoy! +Andrew J. Robinson diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio new file mode 100644 index 0000000..5337e80 --- /dev/null +++ b/Documentation/serial/moxa-smartio @@ -0,0 +1,523 @@ +============================================================================= + MOXA Smartio/Industio Family Device Driver Installation Guide + for Linux Kernel 2.4.x, 2.6.x + Copyright (C) 2008, Moxa Inc. +============================================================================= +Date: 01/21/2008 + +Content + +1. Introduction +2. System Requirement +3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation +4. Utilities +5. Setserial +6. Troubleshooting + +----------------------------------------------------------------------------- +1. Introduction + + The Smartio/Industio/UPCI family Linux driver supports following multiport + boards. + + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P) + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 + + This driver and installation procedure have been developed upon Linux Kernel + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. + + In addition to device driver, useful utilities are also provided in this + version. They are + - msdiag Diagnostic program for displaying installed Moxa + Smartio/Industio boards. + - msmon Monitor program to observe data count and line status signals. + - msterm A simple terminal program which is useful in testing serial + ports. + - io-irq.exe Configuration program to setup ISA boards. Please note that + this program can only be executed under DOS. + + All the drivers and utilities are published in form of source code under + GNU General Public License in this version. Please refer to GNU General + Public License announcement in each source code file for more detail. + + In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. + + This version of driver can be installed as Loadable Module (Module driver) + or built-in into kernel (Static driver). You may refer to following + installation procedure for suitable one. Before you install the driver, + please refer to hardware installation procedure in the User's Manual. + + We assume the user should be familiar with following documents. + - Serial-HOWTO + - Kernel-HOWTO + +----------------------------------------------------------------------------- +2. System Requirement + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x + - gcc version 2.72 or later + - Maximum 4 boards can be installed in combination + +----------------------------------------------------------------------------- +3. Installation + + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation + + + 3.1 Hardware installation + + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. + + ISA board + --------- + You'll have to configure CAP address, I/O address, Interrupt Vector + as well as IRQ before installing this driver. Please refer to hardware + installation procedure in User's Manual before proceed any further. + Please make sure the JP1 is open after the ISA board is set properly. + + PCI/UPCI board + -------------- + You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict + with other ISA devices. Please refer to hardware installation + procedure in User's Manual in advance. + + PCI IRQ Sharing + ----------- + Each port within the same multiport board shares the same IRQ. Up to + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. + + + 3.2 Driver files + + The driver file may be obtained from ftp, CD-ROM or floppy disk. The + first step, anyway, is to copy driver file "mxser.tgz" into specified + directory. e.g. /moxa. The execute commands as below. + + # cd / + # mkdir moxa + # cd /moxa + # tar xvf /dev/fd0 + + or + + # cd / + # mkdir moxa + # cd /moxa + # cp /mnt/cdrom//mxser.tgz . + # tar xvfz mxser.tgz + + + 3.3 Device naming convention + + You may find all the driver and utilities files in /moxa/mxser. + Following installation procedure depends on the model you'd like to + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. + + Dialin and callout port + ----------------------- + This driver remains traditional serial device properties. There are + two special file name for each serial port. One is dial-in port + which is named "ttyMxx". For callout port, the naming convention + is "cumxx". + + Device naming when more than 2 boards installed + ----------------------------------------------- + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. + + Board Num. Dial-in Port Callout port + 1st board ttyM0 - ttyM7 cum0 - cum7 + 2nd board ttyM8 - ttyM15 cum8 - cum15 + 3rd board ttyM16 - ttyM23 cum16 - cum23 + 4th board ttyM24 - ttym31 cum24 - cum31 + + + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* + device instead. + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + + Board sequence + -------------- + This driver will activate ISA boards according to the parameter set + in the driver. After all specified ISA board activated, PCI board + will be installed in the system automatically driven. + Therefore the board number is sorted by the CAP address of ISA boards. + For PCI boards, their sequence will be after ISA boards and C168H/PCI + has higher priority than C104H/PCI boards. + + 3.4 Module driver configuration + Module driver is easiest way to install. If you prefer static driver + installation, please skip this paragraph. + + + ------------- Prepare to use the MOXA driver-------------------- + 3.4.1 Create tty device with correct major number + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" + + The procedure is: + # cd /moxa/mxser/driver + # ./msmknod + + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. + + 3.4.2 Build the MOXA driver and utilities + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + + The driver files "mxser.o" and utilities will be properly compiled + and copied to system directories respectively. + + ------------- Load MOXA driver-------------------- + 3.4.3 Load the MOXA driver + + # modprobe mxser + + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + + + ------------- Load MOXA driver on boot -------------------- + 3.4.4 For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". + + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. + + Run following command for setting rc files. + + # cd /moxa/mxser/driver + # cp ./rc.mxser /etc/rc.d + # cd /etc/rc.d + + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + Add "/etc/rc.d/rc.mxser" in last line, + + Reboot and check if moxa.o activated by "lsmod" command. + + 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows. + + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? + | | | | + | | | +- 4th ISA board + | | +------ 3rd ISA board + | +------------ 2nd ISA board + +------------------- 1st ISA board + + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x + + Note: To use static driver, you must install the linux kernel + source package. + + 3.5.1 Backup the built-in driver in the kernel. + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux + + 3.5.2 Create link + # cd /usr/src/linux/drivers/char + # ln -s /moxa/mxser/driver/mxser.c mxser.c + + 3.5.3 Add CAP address list for ISA boards. For PCI boards user, + please skip this step. + + In module mode, the CAP address for ISA board is given by + parameter. In static driver configuration, you'll have to + assign it within driver's source code. If you will not + install any ISA boards, you may skip to next portion. + The instructions to modify driver source code are as + below. + a. # cd /moxa/mxser/driver + # vi mxser.c + b. Find the array mxserBoardCAP[] as below. + + static int mxserBoardCAP[] + = {0x00, 0x00, 0x00, 0x00}; + + c. Change the address within this array using vi. For + example, to driver 2 ISA boards with CAP address + 0x280 and 0x180 as 1st and 2nd board. Just to change + the source code as follows. + + static int mxserBoardCAP[] + = {0x280, 0x180, 0x00, 0x00}; + + 3.5.4 Setup kernel configuration + + Configure the kernel: + + # cd /usr/src/linux + # make menuconfig + + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. + + 3.5.5 Rebuild kernel + The following are for Linux kernel rebuilding, for your + reference only. + For appropriate details, please refer to the Linux document. + + a. cd /usr/src/linux + b. make clean /* take a few minutes */ + c. make dep /* take a few minutes */ + d. make bzImage /* take probably 10-20 minutes */ + e. make install /* copy boot image to correct position */ + f. Please make sure the boot kernel (vmlinuz) is in the + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". + + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. + + + 3.5.6 Make tty device and special file + # cd /moxa/mxser/driver + # ./msmknod + + 3.5.7 Make utility + # cd /moxa/mxser/utility + # make clean; make install + + 3.5.8 Reboot + + + + 3.6 Custom configuration + Although this driver already provides you default configuration, you + still can change the device name and major number. The instruction to + change these parameters are shown as below. + + Change Device name + ------------------ + If you'd like to use other device names instead of default naming + convention, all you have to do is to modify the internal code + within the shell script "msmknod". First, you have to open "msmknod" + by vi. Locate each line contains "ttyM" and "cum" and change them + to the device name you desired. "msmknod" creates the device names + you need next time executed. + + Change Major number + ------------------- + If major number 30 and 35 had been occupied, you may have to select + 2 free major numbers for this driver. There are 3 steps to change + major numbers. + + 3.6.1 Find free major numbers + In /proc/devices, you may find all the major numbers occupied + in the system. Please select 2 major numbers that are available. + e.g. 40, 45. + 3.6.2 Create special files + Run /moxa/mxser/driver/msmknod to create special files with + specified major numbers. + 3.6.3 Modify driver with new major number + Run vi to open /moxa/mxser/driver/mxser.c. Locate the line + contains "MXSERMAJOR". Change the content as below. + #define MXSERMAJOR 40 + #define MXSERCUMAJOR 45 + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. + + 3.7 Verify driver installation + You may refer to /var/log/messages to check the latest status + log reported by this driver whenever it's activated. + +----------------------------------------------------------------------------- +4. Utilities + There are 3 utilities contained in this driver. They are msdiag, msmon and + msterm. These 3 utilities are released in form of source code. They should + be compiled into executable file and copied into /usr/bin. + + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + + msdiag - Diagnostic + -------------------- + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. + + msmon - Port Monitoring + ----------------------- + This utility gives the user a quick view about all the MOXA ports' + activities. One can easily learn each port's total received/transmitted + (Rx/Tx) character count since the time when the monitoring is started. + Rx/Tx throughputs per second are also reported in interval basis (e.g. + the last 5 seconds) and in average basis (since the time the monitoring + is started). You can reset all ports' count by key. <+> <-> + (plus/minus) keys to change the displaying time interval. Press + on the port, that cursor stay, to view the port's communication + parameters, signal status, and input/output queue. + + msterm - Terminal Emulation + --------------------------- + This utility provides data sending and receiving ability of all tty ports, + especially for MOXA ports. It is quite useful for testing simple + application, for example, sending AT command to a modem connected to the + port or used as a terminal for login purpose. Note that this is only a + dumb terminal emulation without handling full screen operation. + +----------------------------------------------------------------------------- +5. Setserial + + Supported Setserial parameters are listed as below. + + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + close_delay set the amount of time(in 1/100 of a second) that DTR + should be kept low while being closed. + closing_wait set the amount of time(in 1/100 of a second) that the + serial port should wait for data to be drained while + being closed, before the receiver is disable. + spd_hi Use 57.6kb when the application requests 38.4kb. + spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. + spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom divison. + baud_base This option set the base baud rate. + +----------------------------------------------------------------------------- +6. Troubleshooting + + The boot time error messages and solutions are stated as clearly as + possible. If all the possible solutions fail, please contact our technical + support team to get more help. + + + Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. + Solution: + To avoid this problem, please unplug fifth and after board, because Moxa + driver supports up to 4 boards. + + Error msg: Request_irq fail, IRQ(?) may be conflict with another device. + Solution: + Other PCI or ISA devices occupy the assigned IRQ. If you are not sure + which device causes the situation, please check /proc/interrupts to find + free IRQ and simply change another free IRQ for Moxa board. + + Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. + Solution: + Each port within the same multiport board shares the same IRQ. Please set + one IRQ (IRQ doesn't equal to zero) for one Moxa board. + + Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). + Solution: + Moxa ISA board needs an interrupt vector.Please refer to user's manual + "Hardware Installation" chapter to set interrupt vector. + + Error msg: Couldn't install MOXA Smartio/Industio family driver! + Solution: + Load Moxa driver fail, the major number may conflict with other devices. + Please refer to previous section 3.7 to change a free major number for + Moxa driver. + + Error msg: Couldn't install MOXA Smartio/Industio family callout driver! + Solution: + Load Moxa callout driver fail, the callout device major number may + conflict with other devices. Please refer to previous section 3.7 to + change a free callout device major number for Moxa driver. + + +----------------------------------------------------------------------------- + diff --git a/Documentation/serial/riscom8.txt b/Documentation/serial/riscom8.txt new file mode 100644 index 0000000..14f61fd --- /dev/null +++ b/Documentation/serial/riscom8.txt @@ -0,0 +1,36 @@ +* NOTE - this is an unmaintained driver. The original author cannot be located. + +SDL Communications is now SBS Technologies, and does not have any +information on these ancient ISA cards on their website. + +James Nelson - 12-12-2004 + + This is the README for RISCom/8 multi-port serial driver + (C) 1994-1996 D.Gorodchanin + See file LICENSE for terms and conditions. + +NOTE: English is not my native language. + I'm sorry for any mistakes in this text. + +Misc. notes for RISCom/8 serial driver, in no particular order :) + +1) This driver can support up to 4 boards at time. + Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for + setting I/O base addresses for boards. If you compile driver + as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." + +2) The driver partially supports famous 'setserial' program, you can use almost + any of its options, excluding port & irq settings. + +3) There are some misc. defines at the beginning of riscom8.c, please read the + comments and try to change some of them in case of problems. + +4) I consider the current state of the driver as BETA. + +5) SDL Communications WWW page is http://www.sdlcomm.com. + +6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. + +7) Minor numbers for first board are 0-7, for second 8-15, etc. + +22 Apr 1996. diff --git a/Documentation/serial/rocket.txt b/Documentation/serial/rocket.txt new file mode 100644 index 0000000..1d85829 --- /dev/null +++ b/Documentation/serial/rocket.txt @@ -0,0 +1,189 @@ +Comtrol(tm) RocketPort(R)/RocketModem(TM) Series +Device Driver for the Linux Operating System + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +PRODUCT OVERVIEW +---------------- + +This driver provides a loadable kernel driver for the Comtrol RocketPort +and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 +high-speed serial ports or modems. This driver supports up to a combination +of four RocketPort or RocketModems boards in one machine simultaneously. +This file assumes that you are using the RocketPort driver which is +integrated into the kernel sources. + +The driver can also be installed as an external module using the usual +"make;make install" routine. This external module driver, obtainable +from the Comtrol website listed below, is useful for updating the driver +or installing it into kernels which do not have the driver configured +into them. Installations instructions for the external module +are in the included README and HW_INSTALL files. + +RocketPort ISA and RocketModem II PCI boards currently are only supported by +this driver in module form. + +The RocketPort ISA board requires I/O ports to be configured by the DIP +switches on the board. See the section "ISA Rocketport Boards" below for +information on how to set the DIP switches. + +You pass the I/O port to the driver using the following module parameters: + +board1 : I/O port for the first ISA board +board2 : I/O port for the second ISA board +board3 : I/O port for the third ISA board +board4 : I/O port for the fourth ISA board + +There is a set of utilities and scripts provided with the external driver +( downloadable from http://www.comtrol.com ) that ease the configuration and +setup of the ISA cards. + +The RocketModem II PCI boards require firmware to be loaded into the card +before it will function. The driver has only been tested as a module for this +board. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +INSTALLATION PROCEDURES +----------------------- + +RocketPort/RocketModem PCI cards require no driver configuration, they are +automatically detected and configured. + +The RocketPort driver can be installed as a module (recommended) or built +into the kernel. This is selected, as for other drivers, through the `make config` +command from the root of the Linux source tree during the kernel build process. + +The RocketPort/RocketModem serial ports installed by this driver are assigned +device major number 46, and will be named /dev/ttyRx, where x is the port number +starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards +installed in the system, the mapping of port names to serial ports is displayed +in the system log at /var/log/messages. + +If installed as a module, the module must be loaded. This can be done +manually by entering "modprobe rocket". To have the module loaded automatically +upon system boot, edit the /etc/modprobe.conf file and add the line +"alias char-major-46 rocket". + +In order to use the ports, their device names (nodes) must be created with mknod. +This is only required once, the system will retain the names once created. To +create the RocketPort/RocketModem device names, use the command +"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: + +>mknod /dev/ttyR0 c 46 0 +>mknod /dev/ttyR1 c 46 1 +>mknod /dev/ttyR2 c 46 2 + +The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) +for you: + +>/dev/MAKEDEV ttyR + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +ISA Rocketport Boards +--------------------- + +You must assign and configure the I/O addresses used by the ISA Rocketport +card before installing and using it. This is done by setting a set of DIP +switches on the Rocketport board. + + +SETTING THE I/O ADDRESS +----------------------- + +Before installing RocketPort(R) or RocketPort RA boards, you must find +a range of I/O addresses for it to use. The first RocketPort card +requires a 68-byte contiguous block of I/O addresses, starting at one +of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, +0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP +switches of *all* of the Rocketport cards. + +The second, third, and fourth RocketPort cards require a 64-byte +contiguous block of I/O addresses, starting at one of the following +I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, +0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the +second, third, and fourth Rocketport cards (if present) are set via +software control. The DIP switch settings for the I/O address must be +set to the value of the first Rocketport cards. + +In order to distinguish each of the card from the others, each card +must have a unique board ID set on the dip switches. The first +Rocketport board must be set with the DIP switches corresponding to +the first board, the second board must be set with the DIP switches +corresponding to the second board, etc. IMPORTANT: The board ID is +the only place where the DIP switch settings should differ between the +various Rocketport boards in a system. + +The I/O address range used by any of the RocketPort cards must not +conflict with any other cards in the system, including other +RocketPort cards. Below, you will find a list of commonly used I/O +address ranges which may be in use by other devices in your system. +On a Linux system, "cat /proc/ioports" will also be helpful in +identifying what I/O addresses are being used by devices on your +system. + +Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it +for 0x100, it will occupy 0x100 to 0x143. This would mean that you +CAN NOT set the second, third or fourth board for address 0x140 since +the first 4 bytes of that range are used by the first board. You would +need to set the second, third, or fourth board to one of the next available +blocks such as 0x180. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +RocketPort and RocketPort RA SW1 Settings: + + +-------------------------------+ + | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | + +-------+-------+---------------+ + | Unused| Card | I/O Port Block| + +-------------------------------+ + +DIP Switches DIP Switches +7 8 6 5 +=================== =================== +On On UNUSED, MUST BE ON. On On First Card <==== Default + On Off Second Card + Off On Third Card + Off Off Fourth Card + +DIP Switches I/O Address Range +4 3 2 1 Used by the First Card +===================================== +On Off On Off 100-143 +On Off Off On 140-183 +On Off Off Off 180-1C3 <==== Default +Off On On Off 200-243 +Off On Off On 240-283 +Off On Off Off 280-2C3 +Off Off On Off 300-343 +Off Off Off On 340-383 +Off Off Off Off 380-3C3 + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +REPORTING BUGS +-------------- + +For technical support, please provide the following +information: Driver version, kernel release, distribution of +kernel, and type of board you are using. Error messages and log +printouts port configuration details are especially helpful. + +USA + Phone: (612) 494-4100 + FAX: (612) 494-4199 + email: support@comtrol.com + +Comtrol Europe + Phone: +44 (0) 1 869 323-220 + FAX: +44 (0) 1 869 323-211 + email: support@comtrol.co.uk + +Web: http://www.comtrol.com +FTP: ftp.comtrol.com + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + + diff --git a/Documentation/serial/specialix.txt b/Documentation/serial/specialix.txt new file mode 100644 index 0000000..6eb6f3a --- /dev/null +++ b/Documentation/serial/specialix.txt @@ -0,0 +1,383 @@ + + specialix.txt -- specialix IO8+ multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact io8-linux@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + This code is firmly based on the riscom/8 serial driver, + written by Dmitry Gorodchanin. The specialix IO8+ card + programming information was obtained from the CL-CD1865 Data + Book, and Specialix document number 6200059: IO8+ Hardware + Functional Specification, augmented by document number 6200088: + Merak Hardware Functional Specification. (IO8+/PCI is also + called Merak) + + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + +Intro +===== + + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Addresses and interrupts +======================== + +Address dip switch settings: +The dip switch sets bits 2-9 of the IO address. + + 9 8 7 6 5 4 3 2 + +-----------------+ + 0 | X X X X X X X | + | | = IoBase = 0x100 + 1 | X | + +-----------------+ ------ RS232 connectors ----> + + | | | + edge connector + | | | + V V V + +Base address 0x100 caused a conflict in one of my computers once. I +haven't the foggiest why. My Specialix card is now at 0x180. My +other computer runs just fine with the Specialix card at 0x100.... +The card occupies 4 addresses, but actually only two are really used. + +The PCI version doesn't have any dip switches. The BIOS assigns +an IO address. + +The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If +that causes trouble for you, please report that. I'll remove +autoprobing then. + +The driver will tell the card what IRQ to use, so you don't have to +change any jumpers to change the IRQ. Just use a command line +argument (irq=xx) to the insmod program to set the interrupt. + +The BIOS assigns the IRQ on the PCI version. You have no say in what +IRQ to use in that case. + +If your specialix cards are not at the default locations, you can use +the kernel command line argument "specialix=io0,irq0,io1,irq1...". +Here "io0" is the io address for the first card, and "irq0" is the +irq line that the first card should use. And so on. + +Examples. + +You use the driver as a module and have three cards at 0x100, 0x250 +and 0x180. And some way or another you want them detected in that +order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). + + insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 + +The same three cards, but now in the kernel would require you to +add + + specialix=0x100,9,0x250,11,0x180,15 + +to the command line. This would become + + append="specialix=0x100,9,0x250,11,0x180,15" + +in your /etc/lilo.conf file if you use lilo. + +The Specialix driver is slightly odd: It allows you to have the second +or third card detected without having a first card. This has +advantages and disadvantages. A slot that isn't filled by an ISA card, +might be filled if a PCI card is detected. Thus if you have an ISA +card at 0x250 and a PCI card, you would get: + +sx0: specialix IO8+ Board at 0x100 not found. +sx1: specialix IO8+ Board at 0x180 not found. +sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. +sx3: specialix IO8+ Board at 0x260 not found. +sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +This would happen if you don't give any probe hints to the driver. +If you would specify: + + specialix=0x250,11 + +you'd get the following messages: + +sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. +sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +ISA probing is aborted after the IO address you gave is exhausted, and +the PCI card is now detected as the second card. The ISA card is now +also forced to IRQ11.... + + +Baud rates +========== + +The rev 1.2 and below boards use a CL-CD1864. These chips can only +do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips +are officially capable of 115k2. + +The Specialix card uses a 25MHz crystal (in times two mode, which in +fact is a divided by two mode). This is not enough to reach the rated +115k2 on all ports at the same time. With this clock rate you can only +do 37% of this rate. This means that at 115k2 on all ports you are +going to lose characters (The chip cannot handle that many incoming +bits at this clock rate.) (Yes, you read that correctly: there is a +limit to the number of -=bits=- per second that the chip can handle.) + +If you near the "limit" you will first start to see a graceful +degradation in that the chip cannot keep the transmitter busy at all +times. However with a central clock this slow, you can also get it to +miss incoming characters. The driver will print a warning message when +you are outside the official specs. The messages usually show up in +the file /var/log/messages . + +The specialix card cannot reliably do 115k2. If you use it, you have +to do "extensive testing" (*) to verify if it actually works. + +When "mgetty" communicates with my modem at 115k2 it reports: +got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] + ^^^^ ^^^^ ^^^^ + +The three characters that have the "^^^" under them have suffered a +bit error in the highest bit. In conclusion: I've tested it, and found +that it simply DOESN'T work for me. I also suspect that this is also +caused by the baud rate being just a little bit out of tune. + +I upgraded the crystal to 66Mhz on one of my Specialix cards. Works +great! Contact me for details. (Voids warranty, requires a steady hand +and more such restrictions....) + + +(*) Cirrus logic CD1864 databook, page 40. + + +Cables for the Specialix IO8+ +============================= + +The pinout of the connectors on the IO8+ is: + + pin short direction long name + name + Pin 1 DCD input Data Carrier Detect + Pin 2 RXD input Receive + Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send + Pin 4 GND - Ground + Pin 5 TXD output Transmit + Pin 6 CTS input Clear To Send + + + -- 6 5 4 3 2 1 -- + | | + | | + | | + | | + +----- -----+ + |__________| + clip + + Front view of an RJ12 connector. Cable moves "into" the paper. + (the plug is ready to plug into your mouth this way...) + + + NULL cable. I don't know who is going to use these except for + testing purposes, but I tested the cards with this cable. (It + took quite a while to figure out, so I'm not going to delete + it. So there! :-) + + + This end goes This end needs + straight into the some twists in + RJ12 plug. the wiring. + IO8+ RJ12 IO8+ RJ12 + 1 DCD white - + - - 1 DCD + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + 4 GND green 4 GND + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + + + Same NULL cable, but now sorted on the second column. + + 1 DCD white - + - - 1 DCD + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + 4 GND green 4 GND + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + + + + This is a modem cable usable for hardware handshaking: + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 4 RTS 7 RTS + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 20 DTR 4 DTR + + This is a modem cable usable for software handshaking: + It allows you to reset the modem using the DTR ioctls. + I (REW) have never tested this, "but xxxxxxxxxxxxx + says that it works." If you test this, please + tell me and I'll fill in your name on the xxx's. + + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 20 DTR 4 DTR + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 4 RTS 7 RTS + + I bought a 6 wire flat cable. It was colored as indicated. + Check that yours is the same before you trust me on this. + + +Hardware handshaking issues. +============================ + +The driver can be told to operate in two different ways. The default +behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when +hardware handshaking is off. It behaves as the RTS hardware +handshaking signal when hardware handshaking is selected. + +When you use this, you have to use the appropriate cable. The +cable will either be compatible with hardware handshaking or with +software handshaking. So switching on the fly is not really an +option. + +I actually prefer to use the "specialix.sx_rtscts=1" option. +This makes the DTR/RTS pin always an RTS pin, and ioctls to +change DTR are always ignored. I have a cable that is configured +for this. + + +Ports and devices +================= + +Port 0 is the one furthest from the card-edge connector. + +Devices: + +You should make the devices as follows: + +bash +cd /dev +for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ + 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 +do + echo -n "$i " + mknod /dev/ttyW$i c 75 $i + mknod /dev/cuw$i c 76 $i +done +echo "" + +If your system doesn't come with these devices preinstalled, bug your +linux-vendor about this. They have had ample time to get this +implemented by now. + +You cannot have more than 4 boards in one computer. The card only +supports 4 different interrupts. If you really want this, contact me +about this and I'll give you a few tips (requires soldering iron).... + +If you have enough PCI slots, you can probably use more than 4 PCI +versions of the card though.... + +The PCI version of the card cannot adhere to the mechanical part of +the PCI spec because the 8 serial connectors are simply too large. If +it doesn't fit in your computer, bring back the card. + + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - During initialization, interrupts are blindly turned on. + Having a shadow variable would cause an extra memory + access on every IO instruction. + - The interrupt (on the card) should be disabled when we + don't allocate the Linux end of the interrupt. This allows + a different driver/card to use it while all ports are not in + use..... (a la standard serial port) + == An extra _off variant of the sx_in and sx_out macros are + now available. They don't set the interrupt enable bit. + These are used during initialization. Normal operation uses + the old variant which enables the interrupt line. + - RTS/DTR issue needs to be implemented according to + specialix' spec. + I kind of like the "determinism" of the current + implementation. Compile time flag? + == Ok. Compile time flag! Default is how Specialix likes it. + == Now a config time flag! Gets saved in your config file. Neat! + - Can you set the IO address from the lilo command line? + If you need this, bug me about it, I'll make it. + == Hah! No bugging needed. Fixed! :-) + - Cirrus logic hasn't gotten back to me yet why the CD1865 can + and the CD1864 can't do 115k2. I suspect that this is + because the CD1864 is not rated for 33MHz operation. + Therefore the CD1864 versions of the card can't do 115k2 on + all ports just like the CD1865 versions. The driver does + not block 115k2 on CD1864 cards. + == I called the Cirrus Logic representative here in Holland. + The CD1864 databook is identical to the CD1865 databook, + except for an extra warning at the end. Similar Bit errors + have been observed in testing at 115k2 on both an 1865 and + a 1864 chip. I see no reason why I would prohibit 115k2 on + 1864 chips and not do it on 1865 chips. Actually there is + reason to prohibit it on BOTH chips. I print a warning. + If you use 115k2, you're on your own. + - A spiky CD may send spurious HUPs. Also in CLOCAL??? + -- A fix for this turned out to be counter productive. + Different fix? Current behaviour is acceptable? + -- Maybe the current implementation is correct. If anybody + gets bitten by this, please report, and it will get fixed. + + -- Testing revealed that when in CLOCAL, the problem doesn't + occur. As warned for in the CD1865 manual, the chip may + send modem intr's on a spike. We could filter those out, + but that would be a cludge anyway (You'd still risk getting + a spurious HUP when two spikes occur.)..... + + + + Bugs & restrictions: + - This is a difficult card to autoprobe. + You have to WRITE to the address register to even + read-probe a CD186x register. Disable autodetection? + -- Specialix: any suggestions? + + diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt new file mode 100644 index 0000000..5c4902d --- /dev/null +++ b/Documentation/serial/stallion.txt @@ -0,0 +1,392 @@ +* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion +technologies, is not active in driver maintenance, and they have no information +on when or if they will have a 2.6 driver. + +James Nelson - 12-12-2004 + +Stallion Multiport Serial Driver Readme +--------------------------------------- + +Copyright (C) 1994-1999, Stallion Technologies. + +Version: 5.5.1 +Date: 28MAR99 + + + +1. INTRODUCTION + +There are two drivers that work with the different families of Stallion +multiport serial boards. One is for the Stallion smart boards - that is +EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for +the true Stallion intelligent multiport boards - EasyConnection 8/64 +(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. + +If you are using any of the Stallion intelligent multiport boards (Brumby, +ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with +Linux you will need to get the driver utility package. This contains a +firmware loader and the firmware images necessary to make the devices operate. + +The Stallion Technologies ftp site, ftp.stallion.com, will always have +the latest version of the driver utility package. + +ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz + +As of the printing of this document the latest version of the driver +utility package is 5.5.0. If a later version is now available then you +should use the latest version. + +If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI +boards then you don't need this package, although it does have a serial stats +display program. + +If you require DIP switch settings, EISA or MCA configuration files, or any +other information related to Stallion boards then have a look at Stallion's +web pages at http://www.stallion.com. + + + +2. INSTALLATION + +The drivers can be used as loadable modules or compiled into the kernel. +You can choose which when doing a "config" on the kernel. + +All ISA, EISA and MCA boards that you want to use need to be configured into +the driver(s). All PCI boards will be automatically detected when you load +the driver - so they do not need to be entered into the driver(s) +configuration structure. Note that kernel PCI support is required to use PCI +boards. + +There are two methods of configuring ISA, EISA and MCA boards into the drivers. +If using the driver as a loadable module then the simplest method is to pass +the driver configuration as module arguments. The other method is to modify +the driver source to add configuration lines for each board in use. + +If you have pre-built Stallion driver modules then the module argument +configuration method should be used. A lot of Linux distributions come with +pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. +That makes things pretty simple to get going. + + +2.1 MODULE DRIVER CONFIGURATION: + +The simplest configuration for modules is to use the module load arguments +to configure any ISA, EISA or MCA boards. PCI boards are automatically +detected, so do not need any additional configuration at all. + +If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI +boards then use the "stallion" driver module, Otherwise if you are using +an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, +Brumby or original Stallion board then use the "istallion" driver module. + +Typically to load up the smart board driver use: + + modprobe stallion + +This will load the EasyIO and EasyConnection 8/32 driver. It will output a +message to say that it loaded and print the driver version number. It will +also print out whether it found the configured boards or not. These messages +may not appear on the console, but typically are always logged to +/var/adm/messages or /var/log/syslog files - depending on how the klogd and +syslogd daemons are setup on your system. + +To load the intelligent board driver use: + + modprobe istallion + +It will output similar messages to the smart board driver. + +If not using an auto-detectable board type (that is a PCI board) then you +will also need to supply command line arguments to the modprobe command +when loading the driver. The general form of the configuration argument is + + board?=[,[,][,]] + +where: + + board? -- specifies the arbitrary board number of this board, + can be in the range 0 to 3. + + name -- textual name of this board. The board name is the common + board name, or any "shortened" version of that. The board + type number may also be used here. + + ioaddr -- specifies the I/O address of this board. This argument is + optional, but should generally be specified. + + addr -- optional second address argument. Some board types require + a second I/O address, some require a memory address. The + exact meaning of this argument depends on the board type. + + irq -- optional IRQ line used by this board. + +Up to 4 board configuration arguments can be specified on the load line. +Here is some examples: + + modprobe stallion board0=easyio,0x2a0,5 + +This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. + + modprobe istallion board3=ec8/64,0x2c0,0xcc000 + +This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at +memory address 0xcc000. + + modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 + +This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, +secondary address 0x280 and IRQ 10. + +You will probably want to enter this module load and configuration information +into your system startup scripts so that the drivers are loaded and configured +on each system boot. Typically the start up script would be something like +/etc/modprobe.conf. + + +2.2 STATIC DRIVER CONFIGURATION: + +For static driver configuration you need to modify the driver source code. +Entering ISA, EISA and MCA boards into the driver(s) configuration structure +involves editing the driver(s) source file. It's pretty easy if you follow +the instructions below. Both drivers can support up to 4 boards. The smart +card driver (the stallion.c driver) supports any combination of EasyIO and +EasyConnection 8/32 boards (up to a total of 4). The intelligent driver +supports any combination of ONboards, Brumbys, Stallions and EasyConnection +8/64 (ISA and EISA) boards (up to a total of 4). + +To set up the driver(s) for the boards that you want to use you need to +edit the appropriate driver file and add configuration entries. + +If using EasyIO or EasyConnection 8/32 ISA or MCA boards, + In drivers/char/stallion.c: + - find the definition of the stl_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) +boards, + In drivers/char/istallion.c: + - find the definition of the stli_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +Once you have set up the board configurations then you are ready to build +the kernel or modules. + +When the new kernel is booted, or the loadable module loaded then the +driver will emit some kernel trace messages about whether the configured +boards were detected or not. Depending on how your system logger is set +up these may come out on the console, or just be logged to +/var/adm/messages or /var/log/syslog. You should check the messages to +confirm that all is well. + + +2.3 SHARING INTERRUPTS + +It is possible to share interrupts between multiple EasyIO and +EasyConnection 8/32 boards in an EISA system. To do this you must be using +static driver configuration, modifying the driver source code to add driver +configuration. Then a couple of extra things are required: + +1. When entering the board resources into the stallion.c file you need to + mark the boards as using level triggered interrupts. Do this by replacing + the "0" entry at field position 6 (the last field) in the board + configuration structure with a "1". (This is the structure that defines + the board type, I/O locations, etc. for each board). All boards that are + sharing an interrupt must be set this way, and each board should have the + same interrupt number specified here as well. Now build the module or + kernel as you would normally. + +2. When physically installing the boards into the system you must enter + the system EISA configuration utility. You will need to install the EISA + configuration files for *all* the EasyIO and EasyConnection 8/32 boards + that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 + EISA configuration files required are supplied by Stallion Technologies + on the EASY Utilities floppy diskette (usually supplied in the box with + the board when purchased. If not, you can pick it up from Stallion's FTP + site, ftp.stallion.com). You will need to edit the board resources to + choose level triggered interrupts, and make sure to set each board's + interrupt to the same IRQ number. + +You must complete both the above steps for this to work. When you reboot +or load the driver your EasyIO and EasyConnection 8/32 boards will be +sharing interrupts. + + +2.4 USING HIGH SHARED MEMORY + +The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of +using shared memory addresses above the usual 640K - 1Mb range. The ONboard +ISA and the Stallion boards can be programmed to use memory addresses up to +16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and +ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus +addressing limit). + +The higher than 1Mb memory addresses are fully supported by this driver. +Just enter the address as you normally would for a lower than 1Mb address +(in the driver's board configuration structure). + + + +2.5 TROUBLE SHOOTING + +If a board is not found by the driver but is actually in the system then the +most likely problem is that the I/O address is wrong. Change the module load +argument for the loadable module form. Or change it in the driver stallion.c +or istallion.c configuration structure and rebuild the kernel or modules, or +change it on the board. + +On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so +if there is a conflict you may need to change the IRQ used for a board. There +are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 +(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and +ONboard boards is software programmable, but not on the Brumby boards. + + + +3. USING THE DRIVERS + +3.1 INTELLIGENT DRIVER OPERATION + +The intelligent boards also need to have their "firmware" code downloaded +to them. This is done via a user level application supplied in the driver +utility package called "stlload". Compile this program wherever you dropped +the package files, by typing "make". In its simplest form you can then type + + ./stlload -i cdk.sys + +in this directory and that will download board 0 (assuming board 0 is an +EasyConnection 8/64 or EasyConnection/RA board). To download to an +ONboard, Brumby or Stallion do: + + ./stlload -i 2681.sys + +Normally you would want all boards to be downloaded as part of the standard +system startup. To achieve this, add one of the lines above into the +/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add +the "-b " option to the line. You will need to download code for +every board. You should probably move the stlload program into a system +directory, such as /usr/sbin. Also, the default location of the cdk.sys image +file in the stlload down-loader is /usr/lib/stallion. Create that directory +and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put +them anyway). As an example your /etc/rc.d/rc.S file might have the +following lines added to it (if you had 3 boards): + + /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys + /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys + /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys + +The image files cdk.sys and 2681.sys are specific to the board types. The +cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly +the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. +If you load the wrong image file into a board it will fail to start up, and +of course the ports will not be operational! + +If you are using the modularized version of the driver you might want to put +the modprobe calls in the startup script as well (before the download lines +obviously). + + +3.2 USING THE SERIAL PORTS + +Once the driver is installed you will need to setup some device nodes to +access the serial ports. The simplest method is to use the /dev/MAKEDEV program. +It will automatically create device entries for Stallion boards. This will +create the normal serial port devices as /dev/ttyE# where# is the port number +starting from 0. A bank of 64 minor device numbers is allocated to each board, +so the first port on the second board is port 64,etc. A set of callout type +devices may also be created. They are created as the devices /dev/cue# where # +is the same as for the ttyE devices. + +For the most part the Stallion driver tries to emulate the standard PC system +COM ports and the standard Linux serial driver. The idea is that you should +be able to use Stallion board ports and COM ports interchangeably without +modifying anything but the device name. Anything that doesn't work like that +should be considered a bug in this driver! + +If you look at the driver code you will notice that it is fairly closely +based on the Linux serial driver (linux/drivers/char/serial.c). This is +intentional, obviously this is the easiest way to emulate its behavior! + +Since this driver tries to emulate the standard serial ports as much as +possible, most system utilities should work as they do for the standard +COM ports. Most importantly "stty" works as expected and "setserial" can +also be used (excepting the ability to auto-configure the I/O and IRQ +addresses of boards). Higher baud rates are supported in the usual fashion +through setserial or using the CBAUDEX extensions. Note that the EasyIO and +EasyConnection (all types) support at least 57600 and 115200 baud. The newer +EasyConnection XP modules and new EasyIO boards support 230400 and 460800 +baud as well. The older boards including ONboard and Brumby support a +maximum baud rate of 38400. + +If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO +by Greg Hankins. It will explain everything you need to know! + + + +4. NOTES + +You can use both drivers at once if you have a mix of board types installed +in a system. However to do this you will need to change the major numbers +used by one of the drivers. Currently both drivers use major numbers 24, 25 +and 28 for their devices. Change one driver to use some other major numbers, +and then modify the mkdevnods script to make device nodes based on those new +major numbers. For example, you could change the istallion.c driver to use +major numbers 60, 61 and 62. You will also need to create device nodes with +different names for the ports, for example ttyF# and cuf#. + +The original Stallion board is no longer supported by Stallion Technologies. +Although it is known to work with the istallion driver. + +Finding a free physical memory address range can be a problem. The older +boards like the Stallion and ONboard need large areas (64K or even 128K), so +they can be very difficult to get into a system. If you have 16 Mb of RAM +then you have no choice but to put them somewhere in the 640K -> 1Mb range. +ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some +systems. If you have an original Stallion board, "V4.0" or Rev.O, then you +need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. +Older Stallion boards are a much bigger problem. They need 128K of address +space and must be on a 128K boundary. If you don't have a VGA card then +0xc0000 might be usable - there is really no other place you can put them +below 1Mb. + +Both the ONboard and old Stallion boards can use higher memory addresses as +well, but you must have less than 16Mb of RAM to be able to use them. Usual +high memory addresses used include 0xec0000 and 0xf00000. + +The Brumby boards only require 16Kb of address space, so you can usually +squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in +the 0xd0000 range. EasyConnection 8/64 boards are even better, they only +require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 +are good. + +If you are using an EasyConnection 8/64-EI or ONboard/E then usually the +0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of +them can be used then the high memory support to use the really high address +ranges is the best option. Typically the 2Gb range is convenient for them, +and gets them well out of the way. + +The ports of the EasyIO-8M board do not have DCD or DTR signals. So these +ports cannot be used as real modem devices. Generally, when using these +ports you should only use the cueX devices. + +The driver utility package contains a couple of very useful programs. One +is a serial port statistics collection and display program - very handy +for solving serial port problems. The other is an extended option setting +program that works with the intelligent boards. + + + +5. DISCLAIMER + +The information contained in this document is believed to be accurate and +reliable. However, no responsibility is assumed by Stallion Technologies +Pty. Ltd. for its use, nor any infringements of patents or other rights +of third parties resulting from its use. Stallion Technologies reserves +the right to modify the design of its products and will endeavour to change +the information in manuals and accompanying documentation accordingly. + diff --git a/Documentation/serial/sx.txt b/Documentation/serial/sx.txt new file mode 100644 index 0000000..cb4efa0 --- /dev/null +++ b/Documentation/serial/sx.txt @@ -0,0 +1,294 @@ + + sx.txt -- specialix SX/SI multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact support@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + (History) + There used to be an SI driver by Simon Allan. This is a complete + rewrite from scratch. Just a few lines-of-code have been snatched. + + (Sources) + Specialix document number 6210028: SX Host Card and Download Code + Software Functional Specification. + + (Copying) + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + (Addendum) + I'd appreciate it that if you have fixes, that you send them + to me first. + + +Introduction +============ + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Theory of operation +=================== + +An important thing to know is that the driver itself doesn't have the +firmware for the card. This means that you need the separate package +"sx_firmware". For now you can get the source at + + ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz + +The firmware load needs a "misc" device, so you'll need to enable the +"Support for user misc device modules" in your kernel configuration. +The misc device needs to be called "/dev/specialix_sxctl". It needs +misc major 10, and minor number 167 (assigned by HPA). The section +on creating device files below also creates this device. + +After loading the sx.o module into your kernel, the driver will report +the number of cards detected, but because it doesn't have any +firmware, it will not be able to determine the number of ports. Only +when you then run "sx_firmware" will the firmware be downloaded and +the rest of the driver initialized. At that time the sx_firmware +program will report the number of ports installed. + +In contrast with many other multi port serial cards, some of the data +structures are only allocated when the card knows the number of ports +that are connected. This means we won't waste memory for 120 port +descriptor structures when you only have 8 ports. If you experience +problems due to this, please report them: I haven't seen any. + + +Interrupts +========== + +A multi port serial card, would generate a horrendous amount of +interrupts if it would interrupt the CPU for every received +character. Even more than 10 years ago, the trick not to use +interrupts but to poll the serial cards was invented. + +The SX card allow us to do this two ways. First the card limits its +own interrupt rate to a rate that won't overwhelm the CPU. Secondly, +we could forget about the cards interrupt completely and use the +internal timer for this purpose. + +Polling the card can take up to a few percent of your CPU. Using the +interrupts would be better if you have most of the ports idle. Using +timer-based polling is better if your card almost always has work to +do. You save the separate interrupt in that case. + +In any case, it doesn't really matter all that much. + +The most common problem with interrupts is that for ISA cards in a PCI +system the BIOS has to be told to configure that interrupt as "legacy +ISA". Otherwise the card can pull on the interrupt line all it wants +but the CPU won't see this. + +If you can't get the interrupt to work, remember that polling mode is +more efficient (provided you actually use the card intensively). + + +Allowed Configurations +====================== + +Some configurations are disallowed. Even though at a glance they might +seem to work, they are known to lockup the bus between the host card +and the device concentrators. You should respect the drivers decision +not to support certain configurations. It's there for a reason. + +Warning: Seriously technical stuff ahead. Executive summary: Don't use +SX cards except configured at a 64k boundary. Skip the next paragraph. + +The SX cards can theoretically be placed at a 32k boundary. So for +instance you can put an SX card at 0xc8000-0xd7fff. This is not a +"recommended configuration". ISA cards have to tell the bus controller +how they like their timing. Due to timing issues they have to do this +based on which 64k window the address falls into. This means that the +32k window below and above the SX card have to use exactly the same +timing as the SX card. That reportedly works for other SX cards. But +you're still left with two useless 32k windows that should not be used +by anybody else. + + +Configuring the driver +====================== + +PCI cards are always detected. The driver auto-probes for ISA cards at +some sensible addresses. Please report if the auto-probe causes trouble +in your system, or when a card isn't detected. + +I'm afraid I haven't implemented "kernel command line parameters" yet. +This means that if the default doesn't work for you, you shouldn't use +the compiled-into-the-kernel version of the driver. Use a module +instead. If you convince me that you need this, I'll make it for +you. Deal? + +I'm afraid that the module parameters are a bit clumsy. If you have a +better idea, please tell me. + +You can specify several parameters: + + sx_poll: number of jiffies between timer-based polls. + + Set this to "0" to disable timer based polls. + Initialization of cards without a working interrupt + will fail. + + Set this to "1" if you want a polling driver. + (on Intel: 100 polls per second). If you don't use + fast baud rates, you might consider a value like "5". + (If you don't know how to do the math, use 1). + + sx_slowpoll: Number of jiffies between timer-based polls. + Set this to "100" to poll once a second. + This should get the card out of a stall if the driver + ever misses an interrupt. I've never seen this happen, + and if it does, that's a bug. Tell me. + + sx_maxints: Number of interrupts to request from the card. + The card normally limits interrupts to about 100 per + second to offload the host CPU. You can increase this + number to reduce latency on the card a little. + Note that if you give a very high number you can overload + your CPU as well as the CPU on the host card. This setting + is inaccurate and not recommended for SI cards (But it + works). + + sx_irqmask: The mask of allowable IRQs to use. I suggest you set + this to 0 (disable IRQs all together) and use polling if + the assignment of IRQs becomes problematic. This is defined + as the sum of (1 << irq) 's that you want to allow. So + sx_irqmask of 8 (1 << 3) specifies that only irq 3 may + be used by the SX driver. If you want to specify to the + driver: "Either irq 11 or 12 is ok for you to use", then + specify (1 << 11) | (1 << 12) = 0x1800 . + + sx_debug: You can enable different sorts of debug traces with this. + At "-1" all debugging traces are active. You'll get several + times more debugging output than you'll get characters + transmitted. + + +Baud rates +========== + +Theoretically new SXDCs should be capable of more than 460k +baud. However the line drivers usually give up before that. Also the +CPU on the card may not be able to handle 8 channels going at full +blast at that speed. Moreover, the buffers are not large enough to +allow operation with 100 interrupts per second. You'll have to realize +that the card has a 256 byte buffer, so you'll have to increase the +number of interrupts per second if you have more than 256*100 bytes +per second to transmit. If you do any performance testing in this +area, I'd be glad to hear from you... + +(Psst Linux users..... I think the Linux driver is more efficient than +the driver for other OSes. If you can and want to benchmark them +against each other, be my guest, and report your findings...... :-) + + +Ports and devices +================= + +Port 0 is the top connector on the module closest to the host +card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 +instead of from 0 to 7, as they are numbered by linux. I'm stubborn in +this: I know for sure that I wouldn't be able to calculate which port +is which anymore if I would change that.... + + +Devices: + +You should make the device files as follows: + +#!/bin/sh +# (I recommend that you cut-and-paste this into a file and run that) +cd /dev +t=0 +mknod specialix_sxctl c 10 167 +while [ $t -lt 64 ] + do + echo -n "$t " + mknod ttyX$t c 32 $t + mknod cux$t c 33 $t + t=`expr $t + 1` +done +echo "" +rm /etc/psdevtab +ps > /dev/null + + +This creates 64 devices. If you have more, increase the constant on +the line with "while". The devices start at 0, as is customary on +Linux. Specialix seems to like starting the numbering at 1. + +If your system doesn't come with these devices pre-installed, bug your +linux-vendor about this. They should have these devices +"pre-installed" before the new millennium. The "ps" stuff at the end +is to "tell" ps that the new devices exist. + +Officially the maximum number of cards per computer is 4. This driver +however supports as many cards in one machine as you want. You'll run +out of interrupts after a few, but you can switch to polled operation +then. At about 256 ports (More than 8 cards), we run out of minor +device numbers. Sorry. I suggest you buy a second computer.... (Or +switch to RIO). + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - Hangup processing. + -- Done. + + - the write path in generic_serial (lockup / oops). + -- Done (Ugly: not the way I want it. Copied from serial.c). + + - write buffer isn't flushed at close. + -- Done. I still seem to lose a few chars at close. + Sorry. I think that this is a firmware issue. (-> Specialix) + + - drain hardware before changing termios + - Change debug on the fly. + - ISA free irq -1. (no firmware loaded). + - adding c8000 as a probe address. Added warning. + - Add a RAMtest for the RAM on the card.c + - Crash when opening a port "way" of the number of allowed ports. + (for example opening port 60 when there are only 24 ports attached) + - Sometimes the use-count strays a bit. After a few hours of + testing the use count is sometimes "3". If you are not like + me and can remember what you did to get it that way, I'd + appreciate an Email. Possibly fixed. Tell me if anyone still + sees this. + - TAs don't work right if you don't connect all the modem control + signals. SXDCs do. T225 firmware problem -> Specialix. + (Mostly fixed now, I think. Tell me if you encounter this!) + + Bugs & restrictions: + + - Arbitrary baud rates. Requires firmware update. (-> Specialix) + + - Low latency (mostly firmware, -> Specialix) + + + diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt new file mode 100644 index 0000000..8e65c44 --- /dev/null +++ b/Documentation/serial/tty.txt @@ -0,0 +1,292 @@ + + The Lockronomicon + +Your guide to the ancient and twisted locking policies of the tty layer and +the warped logic behind them. Beware all ye who read on. + +FIXME: still need to work out the full set of BKL assumptions and document +them so they can eventually be killed off. + + +Line Discipline +--------------- + +Line disciplines are registered with tty_register_ldisc() passing the +discipline number and the ldisc structure. At the point of registration the +discipline must be ready to use and it is possible it will get used before +the call returns success. If the call returns an error then it won't get +called. Do not re-use ldisc numbers as they are part of the userspace ABI +and writing over an existing ldisc will cause demons to eat your computer. +After the return the ldisc data has been copied so you may free your own +copy of the structure. You must not re-register over the top of the line +discipline even with the same data or your computer again will be eaten by +demons. + +In order to remove a line discipline call tty_unregister_ldisc(). +In ancient times this always worked. In modern times the function will +return -EBUSY if the ldisc is currently in use. Since the ldisc referencing +code manages the module counts this should not usually be a concern. + +Heed this warning: the reference count field of the registered copies of the +tty_ldisc structure in the ldisc table counts the number of lines using this +discipline. The reference count of the tty_ldisc structure within a tty +counts the number of active users of the ldisc at this instant. In effect it +counts the number of threads of execution within an ldisc method (plus those +about to enter and exit although this detail matters not). + +Line Discipline Methods +----------------------- + +TTY side interfaces: + +open() - Called when the line discipline is attached to + the terminal. No other call into the line + discipline for this tty will occur until it + completes successfully. Can sleep. + +close() - This is called on a terminal when the line + discipline is being unplugged. At the point of + execution no further users will enter the + ldisc code for this tty. Can sleep. + +hangup() - Called when the tty line is hung up. + The line discipline should cease I/O to the tty. + No further calls into the ldisc code will occur. + Can sleep. + +write() - A process is writing data through the line + discipline. Multiple write calls are serialized + by the tty layer for the ldisc. May sleep. + +flush_buffer() - (optional) May be called at any point between + open and close, and instructs the line discipline + to empty its input buffer. + +chars_in_buffer() - (optional) Report the number of bytes in the input + buffer. + +set_termios() - (optional) Called on termios structure changes. + The caller passes the old termios data and the + current data is in the tty. Called under the + termios semaphore so allowed to sleep. Serialized + against itself only. + +read() - Move data from the line discipline to the user. + Multiple read calls may occur in parallel and the + ldisc must deal with serialization issues. May + sleep. + +poll() - Check the status for the poll/select calls. Multiple + poll calls may occur in parallel. May sleep. + +ioctl() - Called when an ioctl is handed to the tty layer + that might be for the ldisc. Multiple ioctl calls + may occur in parallel. May sleep. + +Driver Side Interfaces: + +receive_buf() - Hand buffers of bytes from the driver to the ldisc + for processing. Semantics currently rather + mysterious 8( + +write_wakeup() - May be called at any point between open and close. + The TTY_DO_WRITE_WAKEUP flag indicates if a call + is needed but always races versus calls. Thus the + ldisc must be careful about setting order and to + handle unexpected calls. Must not sleep. + + The driver is forbidden from calling this directly + from the ->write call from the ldisc as the ldisc + is permitted to call the driver write method from + this function. In such a situation defer it. + + +Driver Access + +Line discipline methods can call the following methods of the underlying +hardware driver through the function pointers within the tty->driver +structure: + +write() Write a block of characters to the tty device. + Returns the number of characters accepted. The + character buffer passed to this method is already + in kernel space. + +put_char() Queues a character for writing to the tty device. + If there is no room in the queue, the character is + ignored. + +flush_chars() (Optional) If defined, must be called after + queueing characters with put_char() in order to + start transmission. + +write_room() Returns the numbers of characters the tty driver + will accept for queueing to be written. + +ioctl() Invoke device specific ioctl. + Expects data pointers to refer to userspace. + Returns ENOIOCTLCMD for unrecognized ioctl numbers. + +set_termios() Notify the tty driver that the device's termios + settings have changed. New settings are in + tty->termios. Previous settings should be passed in + the "old" argument. + + The API is defined such that the driver should return + the actual modes selected. This means that the + driver function is responsible for modifying any + bits in the request it cannot fulfill to indicate + the actual modes being used. A device with no + hardware capability for change (eg a USB dongle or + virtual port) can provide NULL for this method. + +throttle() Notify the tty driver that input buffers for the + line discipline are close to full, and it should + somehow signal that no more characters should be + sent to the tty. + +unthrottle() Notify the tty driver that characters can now be + sent to the tty without fear of overrunning the + input buffers of the line disciplines. + +stop() Ask the tty driver to stop outputting characters + to the tty device. + +start() Ask the tty driver to resume sending characters + to the tty device. + +hangup() Ask the tty driver to hang up the tty device. + +break_ctl() (Optional) Ask the tty driver to turn on or off + BREAK status on the RS-232 port. If state is -1, + then the BREAK status should be turned on; if + state is 0, then BREAK should be turned off. + If this routine is not implemented, use ioctls + TIOCSBRK / TIOCCBRK instead. + +wait_until_sent() Waits until the device has written out all of the + characters in its transmitter FIFO. + +send_xchar() Send a high-priority XON/XOFF character to the device. + + +Flags + +Line discipline methods have access to tty->flags field containing the +following interesting flags: + +TTY_THROTTLED Driver input is throttled. The ldisc should call + tty->driver->unthrottle() in order to resume + reception when it is ready to process more data. + +TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's + write_wakeup() method in order to resume + transmission when it can accept more data + to transmit. + +TTY_IO_ERROR If set, causes all subsequent userspace read/write + calls on the tty to fail, returning -EIO. + +TTY_OTHER_CLOSED Device is a pty and the other side has closed. + +TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into + smaller chunks. + + +Locking + +Callers to the line discipline functions from the tty layer are required to +take line discipline locks. The same is true of calls from the driver side +but not yet enforced. + +Three calls are now provided + + ldisc = tty_ldisc_ref(tty); + +takes a handle to the line discipline in the tty and returns it. If no ldisc +is currently attached or the ldisc is being closed and re-opened at this +point then NULL is returned. While this handle is held the ldisc will not +change or go away. + + tty_ldisc_deref(ldisc) + +Returns the ldisc reference and allows the ldisc to be closed. Returning the +reference takes away your right to call the ldisc functions until you take +a new reference. + + ldisc = tty_ldisc_ref_wait(tty); + +Performs the same function as tty_ldisc_ref except that it will wait for an +ldisc change to complete and then return a reference to the new ldisc. + +While these functions are slightly slower than the old code they should have +minimal impact as most receive logic uses the flip buffers and they only +need to take a reference when they push bits up through the driver. + +A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc +functions are called with the ldisc unavailable. Thus tty_ldisc_ref will +fail in this situation if used within these functions. Ldisc and driver +code calling its own functions must be careful in this case. + + +Driver Interface +---------------- + +open() - Called when a device is opened. May sleep + +close() - Called when a device is closed. At the point of + return from this call the driver must make no + further ldisc calls of any kind. May sleep + +write() - Called to write bytes to the device. May not + sleep. May occur in parallel in special cases. + Because this includes panic paths drivers generally + shouldn't try and do clever locking here. + +put_char() - Stuff a single character onto the queue. The + driver is guaranteed following up calls to + flush_chars. + +flush_chars() - Ask the kernel to write put_char queue + +write_room() - Return the number of characters tht can be stuffed + into the port buffers without overflow (or less). + The ldisc is responsible for being intelligent + about multi-threading of write_room/write calls + +ioctl() - Called when an ioctl may be for the driver + +set_termios() - Called on termios change, serialized against + itself by a semaphore. May sleep. + +set_ldisc() - Notifier for discipline change. At the point this + is done the discipline is not yet usable. Can now + sleep (I think) + +throttle() - Called by the ldisc to ask the driver to do flow + control. Serialization including with unthrottle + is the job of the ldisc layer. + +unthrottle() - Called by the ldisc to ask the driver to stop flow + control. + +stop() - Ldisc notifier to the driver to stop output. As with + throttle the serializations with start() are down + to the ldisc layer. + +start() - Ldisc notifier to the driver to start output. + +hangup() - Ask the tty driver to cause a hangup initiated + from the host side. [Can sleep ??] + +break_ctl() - Send RS232 break. Can sleep. Can get called in + parallel, driver must serialize (for now), and + with write calls. + +wait_until_sent() - Wait for characters to exit the hardware queue + of the driver. Can sleep + +send_xchar() - Send XON/XOFF and if possible jump the queue with + it in order to get fast flow control responses. + Cannot sleep ?? + diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt deleted file mode 100644 index 6eb6f3a..0000000 --- a/Documentation/specialix.txt +++ /dev/null @@ -1,383 +0,0 @@ - - specialix.txt -- specialix IO8+ multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact io8-linux@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - This code is firmly based on the riscom/8 serial driver, - written by Dmitry Gorodchanin. The specialix IO8+ card - programming information was obtained from the CL-CD1865 Data - Book, and Specialix document number 6200059: IO8+ Hardware - Functional Specification, augmented by document number 6200088: - Merak Hardware Functional Specification. (IO8+/PCI is also - called Merak) - - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - -Intro -===== - - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Addresses and interrupts -======================== - -Address dip switch settings: -The dip switch sets bits 2-9 of the IO address. - - 9 8 7 6 5 4 3 2 - +-----------------+ - 0 | X X X X X X X | - | | = IoBase = 0x100 - 1 | X | - +-----------------+ ------ RS232 connectors ----> - - | | | - edge connector - | | | - V V V - -Base address 0x100 caused a conflict in one of my computers once. I -haven't the foggiest why. My Specialix card is now at 0x180. My -other computer runs just fine with the Specialix card at 0x100.... -The card occupies 4 addresses, but actually only two are really used. - -The PCI version doesn't have any dip switches. The BIOS assigns -an IO address. - -The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If -that causes trouble for you, please report that. I'll remove -autoprobing then. - -The driver will tell the card what IRQ to use, so you don't have to -change any jumpers to change the IRQ. Just use a command line -argument (irq=xx) to the insmod program to set the interrupt. - -The BIOS assigns the IRQ on the PCI version. You have no say in what -IRQ to use in that case. - -If your specialix cards are not at the default locations, you can use -the kernel command line argument "specialix=io0,irq0,io1,irq1...". -Here "io0" is the io address for the first card, and "irq0" is the -irq line that the first card should use. And so on. - -Examples. - -You use the driver as a module and have three cards at 0x100, 0x250 -and 0x180. And some way or another you want them detected in that -order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). - - insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 - -The same three cards, but now in the kernel would require you to -add - - specialix=0x100,9,0x250,11,0x180,15 - -to the command line. This would become - - append="specialix=0x100,9,0x250,11,0x180,15" - -in your /etc/lilo.conf file if you use lilo. - -The Specialix driver is slightly odd: It allows you to have the second -or third card detected without having a first card. This has -advantages and disadvantages. A slot that isn't filled by an ISA card, -might be filled if a PCI card is detected. Thus if you have an ISA -card at 0x250 and a PCI card, you would get: - -sx0: specialix IO8+ Board at 0x100 not found. -sx1: specialix IO8+ Board at 0x180 not found. -sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. -sx3: specialix IO8+ Board at 0x260 not found. -sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -This would happen if you don't give any probe hints to the driver. -If you would specify: - - specialix=0x250,11 - -you'd get the following messages: - -sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. -sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -ISA probing is aborted after the IO address you gave is exhausted, and -the PCI card is now detected as the second card. The ISA card is now -also forced to IRQ11.... - - -Baud rates -========== - -The rev 1.2 and below boards use a CL-CD1864. These chips can only -do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips -are officially capable of 115k2. - -The Specialix card uses a 25MHz crystal (in times two mode, which in -fact is a divided by two mode). This is not enough to reach the rated -115k2 on all ports at the same time. With this clock rate you can only -do 37% of this rate. This means that at 115k2 on all ports you are -going to lose characters (The chip cannot handle that many incoming -bits at this clock rate.) (Yes, you read that correctly: there is a -limit to the number of -=bits=- per second that the chip can handle.) - -If you near the "limit" you will first start to see a graceful -degradation in that the chip cannot keep the transmitter busy at all -times. However with a central clock this slow, you can also get it to -miss incoming characters. The driver will print a warning message when -you are outside the official specs. The messages usually show up in -the file /var/log/messages . - -The specialix card cannot reliably do 115k2. If you use it, you have -to do "extensive testing" (*) to verify if it actually works. - -When "mgetty" communicates with my modem at 115k2 it reports: -got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] - ^^^^ ^^^^ ^^^^ - -The three characters that have the "^^^" under them have suffered a -bit error in the highest bit. In conclusion: I've tested it, and found -that it simply DOESN'T work for me. I also suspect that this is also -caused by the baud rate being just a little bit out of tune. - -I upgraded the crystal to 66Mhz on one of my Specialix cards. Works -great! Contact me for details. (Voids warranty, requires a steady hand -and more such restrictions....) - - -(*) Cirrus logic CD1864 databook, page 40. - - -Cables for the Specialix IO8+ -============================= - -The pinout of the connectors on the IO8+ is: - - pin short direction long name - name - Pin 1 DCD input Data Carrier Detect - Pin 2 RXD input Receive - Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send - Pin 4 GND - Ground - Pin 5 TXD output Transmit - Pin 6 CTS input Clear To Send - - - -- 6 5 4 3 2 1 -- - | | - | | - | | - | | - +----- -----+ - |__________| - clip - - Front view of an RJ12 connector. Cable moves "into" the paper. - (the plug is ready to plug into your mouth this way...) - - - NULL cable. I don't know who is going to use these except for - testing purposes, but I tested the cards with this cable. (It - took quite a while to figure out, so I'm not going to delete - it. So there! :-) - - - This end goes This end needs - straight into the some twists in - RJ12 plug. the wiring. - IO8+ RJ12 IO8+ RJ12 - 1 DCD white - - - - 1 DCD - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - 4 GND green 4 GND - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - - - Same NULL cable, but now sorted on the second column. - - 1 DCD white - - - - 1 DCD - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - 4 GND green 4 GND - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - - - - This is a modem cable usable for hardware handshaking: - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 4 RTS 7 RTS - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 20 DTR 4 DTR - - This is a modem cable usable for software handshaking: - It allows you to reset the modem using the DTR ioctls. - I (REW) have never tested this, "but xxxxxxxxxxxxx - says that it works." If you test this, please - tell me and I'll fill in your name on the xxx's. - - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 20 DTR 4 DTR - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 4 RTS 7 RTS - - I bought a 6 wire flat cable. It was colored as indicated. - Check that yours is the same before you trust me on this. - - -Hardware handshaking issues. -============================ - -The driver can be told to operate in two different ways. The default -behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when -hardware handshaking is off. It behaves as the RTS hardware -handshaking signal when hardware handshaking is selected. - -When you use this, you have to use the appropriate cable. The -cable will either be compatible with hardware handshaking or with -software handshaking. So switching on the fly is not really an -option. - -I actually prefer to use the "specialix.sx_rtscts=1" option. -This makes the DTR/RTS pin always an RTS pin, and ioctls to -change DTR are always ignored. I have a cable that is configured -for this. - - -Ports and devices -================= - -Port 0 is the one furthest from the card-edge connector. - -Devices: - -You should make the devices as follows: - -bash -cd /dev -for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ - 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -do - echo -n "$i " - mknod /dev/ttyW$i c 75 $i - mknod /dev/cuw$i c 76 $i -done -echo "" - -If your system doesn't come with these devices preinstalled, bug your -linux-vendor about this. They have had ample time to get this -implemented by now. - -You cannot have more than 4 boards in one computer. The card only -supports 4 different interrupts. If you really want this, contact me -about this and I'll give you a few tips (requires soldering iron).... - -If you have enough PCI slots, you can probably use more than 4 PCI -versions of the card though.... - -The PCI version of the card cannot adhere to the mechanical part of -the PCI spec because the 8 serial connectors are simply too large. If -it doesn't fit in your computer, bring back the card. - - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - During initialization, interrupts are blindly turned on. - Having a shadow variable would cause an extra memory - access on every IO instruction. - - The interrupt (on the card) should be disabled when we - don't allocate the Linux end of the interrupt. This allows - a different driver/card to use it while all ports are not in - use..... (a la standard serial port) - == An extra _off variant of the sx_in and sx_out macros are - now available. They don't set the interrupt enable bit. - These are used during initialization. Normal operation uses - the old variant which enables the interrupt line. - - RTS/DTR issue needs to be implemented according to - specialix' spec. - I kind of like the "determinism" of the current - implementation. Compile time flag? - == Ok. Compile time flag! Default is how Specialix likes it. - == Now a config time flag! Gets saved in your config file. Neat! - - Can you set the IO address from the lilo command line? - If you need this, bug me about it, I'll make it. - == Hah! No bugging needed. Fixed! :-) - - Cirrus logic hasn't gotten back to me yet why the CD1865 can - and the CD1864 can't do 115k2. I suspect that this is - because the CD1864 is not rated for 33MHz operation. - Therefore the CD1864 versions of the card can't do 115k2 on - all ports just like the CD1865 versions. The driver does - not block 115k2 on CD1864 cards. - == I called the Cirrus Logic representative here in Holland. - The CD1864 databook is identical to the CD1865 databook, - except for an extra warning at the end. Similar Bit errors - have been observed in testing at 115k2 on both an 1865 and - a 1864 chip. I see no reason why I would prohibit 115k2 on - 1864 chips and not do it on 1865 chips. Actually there is - reason to prohibit it on BOTH chips. I print a warning. - If you use 115k2, you're on your own. - - A spiky CD may send spurious HUPs. Also in CLOCAL??? - -- A fix for this turned out to be counter productive. - Different fix? Current behaviour is acceptable? - -- Maybe the current implementation is correct. If anybody - gets bitten by this, please report, and it will get fixed. - - -- Testing revealed that when in CLOCAL, the problem doesn't - occur. As warned for in the CD1865 manual, the chip may - send modem intr's on a spike. We could filter those out, - but that would be a cludge anyway (You'd still risk getting - a spurious HUP when two spikes occur.)..... - - - - Bugs & restrictions: - - This is a difficult card to autoprobe. - You have to WRITE to the address register to even - read-probe a CD186x register. Disable autodetection? - -- Specialix: any suggestions? - - diff --git a/Documentation/stallion.txt b/Documentation/stallion.txt deleted file mode 100644 index 5c4902d..0000000 --- a/Documentation/stallion.txt +++ /dev/null @@ -1,392 +0,0 @@ -* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion -technologies, is not active in driver maintenance, and they have no information -on when or if they will have a 2.6 driver. - -James Nelson - 12-12-2004 - -Stallion Multiport Serial Driver Readme ---------------------------------------- - -Copyright (C) 1994-1999, Stallion Technologies. - -Version: 5.5.1 -Date: 28MAR99 - - - -1. INTRODUCTION - -There are two drivers that work with the different families of Stallion -multiport serial boards. One is for the Stallion smart boards - that is -EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for -the true Stallion intelligent multiport boards - EasyConnection 8/64 -(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. - -If you are using any of the Stallion intelligent multiport boards (Brumby, -ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with -Linux you will need to get the driver utility package. This contains a -firmware loader and the firmware images necessary to make the devices operate. - -The Stallion Technologies ftp site, ftp.stallion.com, will always have -the latest version of the driver utility package. - -ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz - -As of the printing of this document the latest version of the driver -utility package is 5.5.0. If a later version is now available then you -should use the latest version. - -If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI -boards then you don't need this package, although it does have a serial stats -display program. - -If you require DIP switch settings, EISA or MCA configuration files, or any -other information related to Stallion boards then have a look at Stallion's -web pages at http://www.stallion.com. - - - -2. INSTALLATION - -The drivers can be used as loadable modules or compiled into the kernel. -You can choose which when doing a "config" on the kernel. - -All ISA, EISA and MCA boards that you want to use need to be configured into -the driver(s). All PCI boards will be automatically detected when you load -the driver - so they do not need to be entered into the driver(s) -configuration structure. Note that kernel PCI support is required to use PCI -boards. - -There are two methods of configuring ISA, EISA and MCA boards into the drivers. -If using the driver as a loadable module then the simplest method is to pass -the driver configuration as module arguments. The other method is to modify -the driver source to add configuration lines for each board in use. - -If you have pre-built Stallion driver modules then the module argument -configuration method should be used. A lot of Linux distributions come with -pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. -That makes things pretty simple to get going. - - -2.1 MODULE DRIVER CONFIGURATION: - -The simplest configuration for modules is to use the module load arguments -to configure any ISA, EISA or MCA boards. PCI boards are automatically -detected, so do not need any additional configuration at all. - -If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI -boards then use the "stallion" driver module, Otherwise if you are using -an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, -Brumby or original Stallion board then use the "istallion" driver module. - -Typically to load up the smart board driver use: - - modprobe stallion - -This will load the EasyIO and EasyConnection 8/32 driver. It will output a -message to say that it loaded and print the driver version number. It will -also print out whether it found the configured boards or not. These messages -may not appear on the console, but typically are always logged to -/var/adm/messages or /var/log/syslog files - depending on how the klogd and -syslogd daemons are setup on your system. - -To load the intelligent board driver use: - - modprobe istallion - -It will output similar messages to the smart board driver. - -If not using an auto-detectable board type (that is a PCI board) then you -will also need to supply command line arguments to the modprobe command -when loading the driver. The general form of the configuration argument is - - board?=[,[,][,]] - -where: - - board? -- specifies the arbitrary board number of this board, - can be in the range 0 to 3. - - name -- textual name of this board. The board name is the common - board name, or any "shortened" version of that. The board - type number may also be used here. - - ioaddr -- specifies the I/O address of this board. This argument is - optional, but should generally be specified. - - addr -- optional second address argument. Some board types require - a second I/O address, some require a memory address. The - exact meaning of this argument depends on the board type. - - irq -- optional IRQ line used by this board. - -Up to 4 board configuration arguments can be specified on the load line. -Here is some examples: - - modprobe stallion board0=easyio,0x2a0,5 - -This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. - - modprobe istallion board3=ec8/64,0x2c0,0xcc000 - -This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at -memory address 0xcc000. - - modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 - -This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, -secondary address 0x280 and IRQ 10. - -You will probably want to enter this module load and configuration information -into your system startup scripts so that the drivers are loaded and configured -on each system boot. Typically the start up script would be something like -/etc/modprobe.conf. - - -2.2 STATIC DRIVER CONFIGURATION: - -For static driver configuration you need to modify the driver source code. -Entering ISA, EISA and MCA boards into the driver(s) configuration structure -involves editing the driver(s) source file. It's pretty easy if you follow -the instructions below. Both drivers can support up to 4 boards. The smart -card driver (the stallion.c driver) supports any combination of EasyIO and -EasyConnection 8/32 boards (up to a total of 4). The intelligent driver -supports any combination of ONboards, Brumbys, Stallions and EasyConnection -8/64 (ISA and EISA) boards (up to a total of 4). - -To set up the driver(s) for the boards that you want to use you need to -edit the appropriate driver file and add configuration entries. - -If using EasyIO or EasyConnection 8/32 ISA or MCA boards, - In drivers/char/stallion.c: - - find the definition of the stl_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) -boards, - In drivers/char/istallion.c: - - find the definition of the stli_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -Once you have set up the board configurations then you are ready to build -the kernel or modules. - -When the new kernel is booted, or the loadable module loaded then the -driver will emit some kernel trace messages about whether the configured -boards were detected or not. Depending on how your system logger is set -up these may come out on the console, or just be logged to -/var/adm/messages or /var/log/syslog. You should check the messages to -confirm that all is well. - - -2.3 SHARING INTERRUPTS - -It is possible to share interrupts between multiple EasyIO and -EasyConnection 8/32 boards in an EISA system. To do this you must be using -static driver configuration, modifying the driver source code to add driver -configuration. Then a couple of extra things are required: - -1. When entering the board resources into the stallion.c file you need to - mark the boards as using level triggered interrupts. Do this by replacing - the "0" entry at field position 6 (the last field) in the board - configuration structure with a "1". (This is the structure that defines - the board type, I/O locations, etc. for each board). All boards that are - sharing an interrupt must be set this way, and each board should have the - same interrupt number specified here as well. Now build the module or - kernel as you would normally. - -2. When physically installing the boards into the system you must enter - the system EISA configuration utility. You will need to install the EISA - configuration files for *all* the EasyIO and EasyConnection 8/32 boards - that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 - EISA configuration files required are supplied by Stallion Technologies - on the EASY Utilities floppy diskette (usually supplied in the box with - the board when purchased. If not, you can pick it up from Stallion's FTP - site, ftp.stallion.com). You will need to edit the board resources to - choose level triggered interrupts, and make sure to set each board's - interrupt to the same IRQ number. - -You must complete both the above steps for this to work. When you reboot -or load the driver your EasyIO and EasyConnection 8/32 boards will be -sharing interrupts. - - -2.4 USING HIGH SHARED MEMORY - -The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of -using shared memory addresses above the usual 640K - 1Mb range. The ONboard -ISA and the Stallion boards can be programmed to use memory addresses up to -16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and -ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus -addressing limit). - -The higher than 1Mb memory addresses are fully supported by this driver. -Just enter the address as you normally would for a lower than 1Mb address -(in the driver's board configuration structure). - - - -2.5 TROUBLE SHOOTING - -If a board is not found by the driver but is actually in the system then the -most likely problem is that the I/O address is wrong. Change the module load -argument for the loadable module form. Or change it in the driver stallion.c -or istallion.c configuration structure and rebuild the kernel or modules, or -change it on the board. - -On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so -if there is a conflict you may need to change the IRQ used for a board. There -are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 -(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and -ONboard boards is software programmable, but not on the Brumby boards. - - - -3. USING THE DRIVERS - -3.1 INTELLIGENT DRIVER OPERATION - -The intelligent boards also need to have their "firmware" code downloaded -to them. This is done via a user level application supplied in the driver -utility package called "stlload". Compile this program wherever you dropped -the package files, by typing "make". In its simplest form you can then type - - ./stlload -i cdk.sys - -in this directory and that will download board 0 (assuming board 0 is an -EasyConnection 8/64 or EasyConnection/RA board). To download to an -ONboard, Brumby or Stallion do: - - ./stlload -i 2681.sys - -Normally you would want all boards to be downloaded as part of the standard -system startup. To achieve this, add one of the lines above into the -/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add -the "-b " option to the line. You will need to download code for -every board. You should probably move the stlload program into a system -directory, such as /usr/sbin. Also, the default location of the cdk.sys image -file in the stlload down-loader is /usr/lib/stallion. Create that directory -and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put -them anyway). As an example your /etc/rc.d/rc.S file might have the -following lines added to it (if you had 3 boards): - - /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys - /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys - /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys - -The image files cdk.sys and 2681.sys are specific to the board types. The -cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly -the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. -If you load the wrong image file into a board it will fail to start up, and -of course the ports will not be operational! - -If you are using the modularized version of the driver you might want to put -the modprobe calls in the startup script as well (before the download lines -obviously). - - -3.2 USING THE SERIAL PORTS - -Once the driver is installed you will need to setup some device nodes to -access the serial ports. The simplest method is to use the /dev/MAKEDEV program. -It will automatically create device entries for Stallion boards. This will -create the normal serial port devices as /dev/ttyE# where# is the port number -starting from 0. A bank of 64 minor device numbers is allocated to each board, -so the first port on the second board is port 64,etc. A set of callout type -devices may also be created. They are created as the devices /dev/cue# where # -is the same as for the ttyE devices. - -For the most part the Stallion driver tries to emulate the standard PC system -COM ports and the standard Linux serial driver. The idea is that you should -be able to use Stallion board ports and COM ports interchangeably without -modifying anything but the device name. Anything that doesn't work like that -should be considered a bug in this driver! - -If you look at the driver code you will notice that it is fairly closely -based on the Linux serial driver (linux/drivers/char/serial.c). This is -intentional, obviously this is the easiest way to emulate its behavior! - -Since this driver tries to emulate the standard serial ports as much as -possible, most system utilities should work as they do for the standard -COM ports. Most importantly "stty" works as expected and "setserial" can -also be used (excepting the ability to auto-configure the I/O and IRQ -addresses of boards). Higher baud rates are supported in the usual fashion -through setserial or using the CBAUDEX extensions. Note that the EasyIO and -EasyConnection (all types) support at least 57600 and 115200 baud. The newer -EasyConnection XP modules and new EasyIO boards support 230400 and 460800 -baud as well. The older boards including ONboard and Brumby support a -maximum baud rate of 38400. - -If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO -by Greg Hankins. It will explain everything you need to know! - - - -4. NOTES - -You can use both drivers at once if you have a mix of board types installed -in a system. However to do this you will need to change the major numbers -used by one of the drivers. Currently both drivers use major numbers 24, 25 -and 28 for their devices. Change one driver to use some other major numbers, -and then modify the mkdevnods script to make device nodes based on those new -major numbers. For example, you could change the istallion.c driver to use -major numbers 60, 61 and 62. You will also need to create device nodes with -different names for the ports, for example ttyF# and cuf#. - -The original Stallion board is no longer supported by Stallion Technologies. -Although it is known to work with the istallion driver. - -Finding a free physical memory address range can be a problem. The older -boards like the Stallion and ONboard need large areas (64K or even 128K), so -they can be very difficult to get into a system. If you have 16 Mb of RAM -then you have no choice but to put them somewhere in the 640K -> 1Mb range. -ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some -systems. If you have an original Stallion board, "V4.0" or Rev.O, then you -need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. -Older Stallion boards are a much bigger problem. They need 128K of address -space and must be on a 128K boundary. If you don't have a VGA card then -0xc0000 might be usable - there is really no other place you can put them -below 1Mb. - -Both the ONboard and old Stallion boards can use higher memory addresses as -well, but you must have less than 16Mb of RAM to be able to use them. Usual -high memory addresses used include 0xec0000 and 0xf00000. - -The Brumby boards only require 16Kb of address space, so you can usually -squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in -the 0xd0000 range. EasyConnection 8/64 boards are even better, they only -require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 -are good. - -If you are using an EasyConnection 8/64-EI or ONboard/E then usually the -0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of -them can be used then the high memory support to use the really high address -ranges is the best option. Typically the 2Gb range is convenient for them, -and gets them well out of the way. - -The ports of the EasyIO-8M board do not have DCD or DTR signals. So these -ports cannot be used as real modem devices. Generally, when using these -ports you should only use the cueX devices. - -The driver utility package contains a couple of very useful programs. One -is a serial port statistics collection and display program - very handy -for solving serial port problems. The other is an extended option setting -program that works with the intelligent boards. - - - -5. DISCLAIMER - -The information contained in this document is believed to be accurate and -reliable. However, no responsibility is assumed by Stallion Technologies -Pty. Ltd. for its use, nor any infringements of patents or other rights -of third parties resulting from its use. Stallion Technologies reserves -the right to modify the design of its products and will endeavour to change -the information in manuals and accompanying documentation accordingly. - diff --git a/Documentation/sx.txt b/Documentation/sx.txt deleted file mode 100644 index cb4efa0..0000000 --- a/Documentation/sx.txt +++ /dev/null @@ -1,294 +0,0 @@ - - sx.txt -- specialix SX/SI multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact support@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - (History) - There used to be an SI driver by Simon Allan. This is a complete - rewrite from scratch. Just a few lines-of-code have been snatched. - - (Sources) - Specialix document number 6210028: SX Host Card and Download Code - Software Functional Specification. - - (Copying) - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - (Addendum) - I'd appreciate it that if you have fixes, that you send them - to me first. - - -Introduction -============ - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Theory of operation -=================== - -An important thing to know is that the driver itself doesn't have the -firmware for the card. This means that you need the separate package -"sx_firmware". For now you can get the source at - - ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz - -The firmware load needs a "misc" device, so you'll need to enable the -"Support for user misc device modules" in your kernel configuration. -The misc device needs to be called "/dev/specialix_sxctl". It needs -misc major 10, and minor number 167 (assigned by HPA). The section -on creating device files below also creates this device. - -After loading the sx.o module into your kernel, the driver will report -the number of cards detected, but because it doesn't have any -firmware, it will not be able to determine the number of ports. Only -when you then run "sx_firmware" will the firmware be downloaded and -the rest of the driver initialized. At that time the sx_firmware -program will report the number of ports installed. - -In contrast with many other multi port serial cards, some of the data -structures are only allocated when the card knows the number of ports -that are connected. This means we won't waste memory for 120 port -descriptor structures when you only have 8 ports. If you experience -problems due to this, please report them: I haven't seen any. - - -Interrupts -========== - -A multi port serial card, would generate a horrendous amount of -interrupts if it would interrupt the CPU for every received -character. Even more than 10 years ago, the trick not to use -interrupts but to poll the serial cards was invented. - -The SX card allow us to do this two ways. First the card limits its -own interrupt rate to a rate that won't overwhelm the CPU. Secondly, -we could forget about the cards interrupt completely and use the -internal timer for this purpose. - -Polling the card can take up to a few percent of your CPU. Using the -interrupts would be better if you have most of the ports idle. Using -timer-based polling is better if your card almost always has work to -do. You save the separate interrupt in that case. - -In any case, it doesn't really matter all that much. - -The most common problem with interrupts is that for ISA cards in a PCI -system the BIOS has to be told to configure that interrupt as "legacy -ISA". Otherwise the card can pull on the interrupt line all it wants -but the CPU won't see this. - -If you can't get the interrupt to work, remember that polling mode is -more efficient (provided you actually use the card intensively). - - -Allowed Configurations -====================== - -Some configurations are disallowed. Even though at a glance they might -seem to work, they are known to lockup the bus between the host card -and the device concentrators. You should respect the drivers decision -not to support certain configurations. It's there for a reason. - -Warning: Seriously technical stuff ahead. Executive summary: Don't use -SX cards except configured at a 64k boundary. Skip the next paragraph. - -The SX cards can theoretically be placed at a 32k boundary. So for -instance you can put an SX card at 0xc8000-0xd7fff. This is not a -"recommended configuration". ISA cards have to tell the bus controller -how they like their timing. Due to timing issues they have to do this -based on which 64k window the address falls into. This means that the -32k window below and above the SX card have to use exactly the same -timing as the SX card. That reportedly works for other SX cards. But -you're still left with two useless 32k windows that should not be used -by anybody else. - - -Configuring the driver -====================== - -PCI cards are always detected. The driver auto-probes for ISA cards at -some sensible addresses. Please report if the auto-probe causes trouble -in your system, or when a card isn't detected. - -I'm afraid I haven't implemented "kernel command line parameters" yet. -This means that if the default doesn't work for you, you shouldn't use -the compiled-into-the-kernel version of the driver. Use a module -instead. If you convince me that you need this, I'll make it for -you. Deal? - -I'm afraid that the module parameters are a bit clumsy. If you have a -better idea, please tell me. - -You can specify several parameters: - - sx_poll: number of jiffies between timer-based polls. - - Set this to "0" to disable timer based polls. - Initialization of cards without a working interrupt - will fail. - - Set this to "1" if you want a polling driver. - (on Intel: 100 polls per second). If you don't use - fast baud rates, you might consider a value like "5". - (If you don't know how to do the math, use 1). - - sx_slowpoll: Number of jiffies between timer-based polls. - Set this to "100" to poll once a second. - This should get the card out of a stall if the driver - ever misses an interrupt. I've never seen this happen, - and if it does, that's a bug. Tell me. - - sx_maxints: Number of interrupts to request from the card. - The card normally limits interrupts to about 100 per - second to offload the host CPU. You can increase this - number to reduce latency on the card a little. - Note that if you give a very high number you can overload - your CPU as well as the CPU on the host card. This setting - is inaccurate and not recommended for SI cards (But it - works). - - sx_irqmask: The mask of allowable IRQs to use. I suggest you set - this to 0 (disable IRQs all together) and use polling if - the assignment of IRQs becomes problematic. This is defined - as the sum of (1 << irq) 's that you want to allow. So - sx_irqmask of 8 (1 << 3) specifies that only irq 3 may - be used by the SX driver. If you want to specify to the - driver: "Either irq 11 or 12 is ok for you to use", then - specify (1 << 11) | (1 << 12) = 0x1800 . - - sx_debug: You can enable different sorts of debug traces with this. - At "-1" all debugging traces are active. You'll get several - times more debugging output than you'll get characters - transmitted. - - -Baud rates -========== - -Theoretically new SXDCs should be capable of more than 460k -baud. However the line drivers usually give up before that. Also the -CPU on the card may not be able to handle 8 channels going at full -blast at that speed. Moreover, the buffers are not large enough to -allow operation with 100 interrupts per second. You'll have to realize -that the card has a 256 byte buffer, so you'll have to increase the -number of interrupts per second if you have more than 256*100 bytes -per second to transmit. If you do any performance testing in this -area, I'd be glad to hear from you... - -(Psst Linux users..... I think the Linux driver is more efficient than -the driver for other OSes. If you can and want to benchmark them -against each other, be my guest, and report your findings...... :-) - - -Ports and devices -================= - -Port 0 is the top connector on the module closest to the host -card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 -instead of from 0 to 7, as they are numbered by linux. I'm stubborn in -this: I know for sure that I wouldn't be able to calculate which port -is which anymore if I would change that.... - - -Devices: - -You should make the device files as follows: - -#!/bin/sh -# (I recommend that you cut-and-paste this into a file and run that) -cd /dev -t=0 -mknod specialix_sxctl c 10 167 -while [ $t -lt 64 ] - do - echo -n "$t " - mknod ttyX$t c 32 $t - mknod cux$t c 33 $t - t=`expr $t + 1` -done -echo "" -rm /etc/psdevtab -ps > /dev/null - - -This creates 64 devices. If you have more, increase the constant on -the line with "while". The devices start at 0, as is customary on -Linux. Specialix seems to like starting the numbering at 1. - -If your system doesn't come with these devices pre-installed, bug your -linux-vendor about this. They should have these devices -"pre-installed" before the new millennium. The "ps" stuff at the end -is to "tell" ps that the new devices exist. - -Officially the maximum number of cards per computer is 4. This driver -however supports as many cards in one machine as you want. You'll run -out of interrupts after a few, but you can switch to polled operation -then. At about 256 ports (More than 8 cards), we run out of minor -device numbers. Sorry. I suggest you buy a second computer.... (Or -switch to RIO). - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - Hangup processing. - -- Done. - - - the write path in generic_serial (lockup / oops). - -- Done (Ugly: not the way I want it. Copied from serial.c). - - - write buffer isn't flushed at close. - -- Done. I still seem to lose a few chars at close. - Sorry. I think that this is a firmware issue. (-> Specialix) - - - drain hardware before changing termios - - Change debug on the fly. - - ISA free irq -1. (no firmware loaded). - - adding c8000 as a probe address. Added warning. - - Add a RAMtest for the RAM on the card.c - - Crash when opening a port "way" of the number of allowed ports. - (for example opening port 60 when there are only 24 ports attached) - - Sometimes the use-count strays a bit. After a few hours of - testing the use count is sometimes "3". If you are not like - me and can remember what you did to get it that way, I'd - appreciate an Email. Possibly fixed. Tell me if anyone still - sees this. - - TAs don't work right if you don't connect all the modem control - signals. SXDCs do. T225 firmware problem -> Specialix. - (Mostly fixed now, I think. Tell me if you encounter this!) - - Bugs & restrictions: - - - Arbitrary baud rates. Requires firmware update. (-> Specialix) - - - Low latency (mostly firmware, -> Specialix) - - - diff --git a/Documentation/tty.txt b/Documentation/tty.txt deleted file mode 100644 index 8e65c44..0000000 --- a/Documentation/tty.txt +++ /dev/null @@ -1,292 +0,0 @@ - - The Lockronomicon - -Your guide to the ancient and twisted locking policies of the tty layer and -the warped logic behind them. Beware all ye who read on. - -FIXME: still need to work out the full set of BKL assumptions and document -them so they can eventually be killed off. - - -Line Discipline ---------------- - -Line disciplines are registered with tty_register_ldisc() passing the -discipline number and the ldisc structure. At the point of registration the -discipline must be ready to use and it is possible it will get used before -the call returns success. If the call returns an error then it won't get -called. Do not re-use ldisc numbers as they are part of the userspace ABI -and writing over an existing ldisc will cause demons to eat your computer. -After the return the ldisc data has been copied so you may free your own -copy of the structure. You must not re-register over the top of the line -discipline even with the same data or your computer again will be eaten by -demons. - -In order to remove a line discipline call tty_unregister_ldisc(). -In ancient times this always worked. In modern times the function will -return -EBUSY if the ldisc is currently in use. Since the ldisc referencing -code manages the module counts this should not usually be a concern. - -Heed this warning: the reference count field of the registered copies of the -tty_ldisc structure in the ldisc table counts the number of lines using this -discipline. The reference count of the tty_ldisc structure within a tty -counts the number of active users of the ldisc at this instant. In effect it -counts the number of threads of execution within an ldisc method (plus those -about to enter and exit although this detail matters not). - -Line Discipline Methods ------------------------ - -TTY side interfaces: - -open() - Called when the line discipline is attached to - the terminal. No other call into the line - discipline for this tty will occur until it - completes successfully. Can sleep. - -close() - This is called on a terminal when the line - discipline is being unplugged. At the point of - execution no further users will enter the - ldisc code for this tty. Can sleep. - -hangup() - Called when the tty line is hung up. - The line discipline should cease I/O to the tty. - No further calls into the ldisc code will occur. - Can sleep. - -write() - A process is writing data through the line - discipline. Multiple write calls are serialized - by the tty layer for the ldisc. May sleep. - -flush_buffer() - (optional) May be called at any point between - open and close, and instructs the line discipline - to empty its input buffer. - -chars_in_buffer() - (optional) Report the number of bytes in the input - buffer. - -set_termios() - (optional) Called on termios structure changes. - The caller passes the old termios data and the - current data is in the tty. Called under the - termios semaphore so allowed to sleep. Serialized - against itself only. - -read() - Move data from the line discipline to the user. - Multiple read calls may occur in parallel and the - ldisc must deal with serialization issues. May - sleep. - -poll() - Check the status for the poll/select calls. Multiple - poll calls may occur in parallel. May sleep. - -ioctl() - Called when an ioctl is handed to the tty layer - that might be for the ldisc. Multiple ioctl calls - may occur in parallel. May sleep. - -Driver Side Interfaces: - -receive_buf() - Hand buffers of bytes from the driver to the ldisc - for processing. Semantics currently rather - mysterious 8( - -write_wakeup() - May be called at any point between open and close. - The TTY_DO_WRITE_WAKEUP flag indicates if a call - is needed but always races versus calls. Thus the - ldisc must be careful about setting order and to - handle unexpected calls. Must not sleep. - - The driver is forbidden from calling this directly - from the ->write call from the ldisc as the ldisc - is permitted to call the driver write method from - this function. In such a situation defer it. - - -Driver Access - -Line discipline methods can call the following methods of the underlying -hardware driver through the function pointers within the tty->driver -structure: - -write() Write a block of characters to the tty device. - Returns the number of characters accepted. The - character buffer passed to this method is already - in kernel space. - -put_char() Queues a character for writing to the tty device. - If there is no room in the queue, the character is - ignored. - -flush_chars() (Optional) If defined, must be called after - queueing characters with put_char() in order to - start transmission. - -write_room() Returns the numbers of characters the tty driver - will accept for queueing to be written. - -ioctl() Invoke device specific ioctl. - Expects data pointers to refer to userspace. - Returns ENOIOCTLCMD for unrecognized ioctl numbers. - -set_termios() Notify the tty driver that the device's termios - settings have changed. New settings are in - tty->termios. Previous settings should be passed in - the "old" argument. - - The API is defined such that the driver should return - the actual modes selected. This means that the - driver function is responsible for modifying any - bits in the request it cannot fulfill to indicate - the actual modes being used. A device with no - hardware capability for change (eg a USB dongle or - virtual port) can provide NULL for this method. - -throttle() Notify the tty driver that input buffers for the - line discipline are close to full, and it should - somehow signal that no more characters should be - sent to the tty. - -unthrottle() Notify the tty driver that characters can now be - sent to the tty without fear of overrunning the - input buffers of the line disciplines. - -stop() Ask the tty driver to stop outputting characters - to the tty device. - -start() Ask the tty driver to resume sending characters - to the tty device. - -hangup() Ask the tty driver to hang up the tty device. - -break_ctl() (Optional) Ask the tty driver to turn on or off - BREAK status on the RS-232 port. If state is -1, - then the BREAK status should be turned on; if - state is 0, then BREAK should be turned off. - If this routine is not implemented, use ioctls - TIOCSBRK / TIOCCBRK instead. - -wait_until_sent() Waits until the device has written out all of the - characters in its transmitter FIFO. - -send_xchar() Send a high-priority XON/XOFF character to the device. - - -Flags - -Line discipline methods have access to tty->flags field containing the -following interesting flags: - -TTY_THROTTLED Driver input is throttled. The ldisc should call - tty->driver->unthrottle() in order to resume - reception when it is ready to process more data. - -TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's - write_wakeup() method in order to resume - transmission when it can accept more data - to transmit. - -TTY_IO_ERROR If set, causes all subsequent userspace read/write - calls on the tty to fail, returning -EIO. - -TTY_OTHER_CLOSED Device is a pty and the other side has closed. - -TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into - smaller chunks. - - -Locking - -Callers to the line discipline functions from the tty layer are required to -take line discipline locks. The same is true of calls from the driver side -but not yet enforced. - -Three calls are now provided - - ldisc = tty_ldisc_ref(tty); - -takes a handle to the line discipline in the tty and returns it. If no ldisc -is currently attached or the ldisc is being closed and re-opened at this -point then NULL is returned. While this handle is held the ldisc will not -change or go away. - - tty_ldisc_deref(ldisc) - -Returns the ldisc reference and allows the ldisc to be closed. Returning the -reference takes away your right to call the ldisc functions until you take -a new reference. - - ldisc = tty_ldisc_ref_wait(tty); - -Performs the same function as tty_ldisc_ref except that it will wait for an -ldisc change to complete and then return a reference to the new ldisc. - -While these functions are slightly slower than the old code they should have -minimal impact as most receive logic uses the flip buffers and they only -need to take a reference when they push bits up through the driver. - -A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc -functions are called with the ldisc unavailable. Thus tty_ldisc_ref will -fail in this situation if used within these functions. Ldisc and driver -code calling its own functions must be careful in this case. - - -Driver Interface ----------------- - -open() - Called when a device is opened. May sleep - -close() - Called when a device is closed. At the point of - return from this call the driver must make no - further ldisc calls of any kind. May sleep - -write() - Called to write bytes to the device. May not - sleep. May occur in parallel in special cases. - Because this includes panic paths drivers generally - shouldn't try and do clever locking here. - -put_char() - Stuff a single character onto the queue. The - driver is guaranteed following up calls to - flush_chars. - -flush_chars() - Ask the kernel to write put_char queue - -write_room() - Return the number of characters tht can be stuffed - into the port buffers without overflow (or less). - The ldisc is responsible for being intelligent - about multi-threading of write_room/write calls - -ioctl() - Called when an ioctl may be for the driver - -set_termios() - Called on termios change, serialized against - itself by a semaphore. May sleep. - -set_ldisc() - Notifier for discipline change. At the point this - is done the discipline is not yet usable. Can now - sleep (I think) - -throttle() - Called by the ldisc to ask the driver to do flow - control. Serialization including with unthrottle - is the job of the ldisc layer. - -unthrottle() - Called by the ldisc to ask the driver to stop flow - control. - -stop() - Ldisc notifier to the driver to stop output. As with - throttle the serializations with start() are down - to the ldisc layer. - -start() - Ldisc notifier to the driver to start output. - -hangup() - Ask the tty driver to cause a hangup initiated - from the host side. [Can sleep ??] - -break_ctl() - Send RS232 break. Can sleep. Can get called in - parallel, driver must serialize (for now), and - with write calls. - -wait_until_sent() - Wait for characters to exit the hardware queue - of the driver. Can sleep - -send_xchar() - Send XON/XOFF and if possible jump the queue with - it in order to get fast flow control responses. - Cannot sleep ?? - diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 61ad8d6..0344a8a 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -21,7 +21,8 @@ config BLK_DEV_FD ---help--- If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM - Thinkpad users, is contained in . + Thinkpad users, is contained in + . That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. @@ -76,7 +77,7 @@ config PARIDE your computer's parallel port. Most of them are actually IDE devices using a parallel port IDE adapter. This option enables the PARIDE subsystem which contains drivers for many of these external drives. - Read for more information. + Read for more information. If you have said Y to the "Parallel-port support" configuration option, you may share a single port between your printer and other @@ -114,9 +115,9 @@ config BLK_CPQ_DA help This is the driver for Compaq Smart Array controllers. Everyone using these boards should say Y here. See the file - for the current list of boards - supported by this driver, and for further information on the use of - this driver. + for the current list of + boards supported by this driver, and for further information on the + use of this driver. config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" @@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. - See for the current list of + See for the current list of boards supported by this driver, and for further information on the use of this driver. @@ -135,7 +136,7 @@ config CISS_SCSI_TAPE help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See for more details.) + controller. (See for more details.) "SCSI support" and "SCSI tape support" must also be enabled for this option to work. @@ -149,8 +150,8 @@ config BLK_DEV_DAC960 help This driver adds support for the Mylex DAC960, AcceleRAID, and eXtremeRAID PCI RAID controllers. See the file - for further information about - this driver. + for further information + about this driver. To compile this driver as a module, choose M here: the module will be called DAC960. @@ -278,9 +279,9 @@ config BLK_DEV_NBD userland (making server and client physically the same computer, communicating using the loopback network device). - Read for more information, especially - about where to find the server code, which runs in user space and - does not need special kernel support. + Read for more information, + especially about where to find the server code, which runs in user + space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. @@ -321,8 +322,8 @@ config BLK_DEV_RAM store a copy of a minimal root file system off of a floppy into RAM during the initial install of Linux. - Note that the kernel command line option "ramdisk=XX" is now - obsolete. For details, read . + Note that the kernel command line option "ramdisk=XX" is now obsolete. + For details, read . To compile this driver as a module, choose M here: the module will be called rd. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 14db747..cf29cc4 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str) printk("\n"); } else DPRINT("botched floppy option\n"); - DPRINT("Read Documentation/floppy.txt\n"); + DPRINT("Read Documentation/blockdev/floppy.txt\n"); return 0; } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 43b35d0..43d6ba8 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read . + Y here and read . To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read . + and this driver read . To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - . + . To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - . + . To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file . + say Y here and read the file . Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - . Also it's possible to say M here - and compile this driver as kernel loadable module which will be + . Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file for details. + Please read the file for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called istallion. diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46..a16b94f 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include -- cgit v0.10.2 From 4ff429e658c00bcf5101eabbebd4f711572a64cb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:05:17 -0800 Subject: 9p: restrict RDMA usage linux-next: Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: Eric Van Hensbergen diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c4..0663f99 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v0.10.2 From e3e081e1d5c4791f4416ed57b7a2f143ab9e5b09 Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 14 Nov 2008 14:44:08 -0800 Subject: NIU: Add Sun CP3260 ATCA blade support This patch adds support for the Sun CP3260 ATCA blade which is a N2 based ATCA blade with 2 NIU ports. The NIU ports do not have on-board PHY. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller diff --git a/drivers/net/niu.c b/drivers/net/niu.c index d8463b1..be6b4d7 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1998,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883..180ca8a 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 -- cgit v0.10.2 From d8c3e23d06c1020f38b7b6290135a9522a2e3052 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Nov 2008 14:47:29 -0800 Subject: niu: Bump driver version and release date. This driver is pretty mature, and the worst of the known problems has been fixed (the 32-bit failures due to readq implementation). So let's finally give it a version of 1.0 Signed-off-by: David S. Miller diff --git a/drivers/net/niu.c b/drivers/net/niu.c index be6b4d7..1b6f548 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -- cgit v0.10.2 From 5421ae0153b4ba0469967cfd8de96144e3bf3979 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 14 Nov 2008 14:51:45 -0800 Subject: scm: fix scm_fp_list->list initialization made in wrong place This is the next page of the scm recursion story (the commit f8d570a4 net: Fix recursive descent in __scm_destroy()). In function scm_fp_dup(), the INIT_LIST_HEAD(&fpl->list) of newly created fpl is done *before* the subsequent memcpy from the old structure and thus the freshly initialized list is overwritten. But that's OK, since this initialization is not required at all, since the fpl->list is list_add-ed at the destruction time in any case (and is unused in other code), so I propose to drop both initializations, rather than moving it after the memcpy. Please, correct me if I miss something significant. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/core/scm.c b/net/core/scm.c index ab242cc..b12303d 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,7 +75,6 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; - INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -301,7 +300,6 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { - INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); -- cgit v0.10.2 From 18acfa2597d57c19249346d130fc3334244557b4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 21:26:27 +0300 Subject: net/ucc_geth: Fix oops in uec_get_ethtool_stats() p_{tx,rx}_fw_statistics_pram are special: they're available only when a device is open. If the device is closed, we should just fill the data with zeroes. Fixes the following oops: root@b1:~# ifconfig eth1 down root@b1:~# ethtool -S eth1 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01e1dcc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124 LR [c0287cc8] ethtool_get_stats+0xfc/0x23c Call Trace: [cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable) [cfaade20] [c0288340] dev_ethtool+0x2fc/0x588 [cfaade50] [c0285648] dev_ioctl+0x290/0x33c [cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec [cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0 [cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c [cfaadf10] [c00b617c] sys_ioctl+0x40/0x74 [cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38 [...] ---[ end trace b941007b2dfb9759 ]--- Segmentation fault p.s. While at it, also remove u64 casts, they aren't needed. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b..68a7f54 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } -- cgit v0.10.2 From 81183059e89c36f9b4c41f9332d642c2e0bff971 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 12 Nov 2008 10:07:11 -0600 Subject: gianfar: Fix DMA unmap invocations We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6..c4af949 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v0.10.2 From 7ee0fddfe05f105d3346aa8774695e7130697836 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Tue, 11 Nov 2008 16:21:48 -0600 Subject: atl1e: fix broken multicast by removing unnecessary crc inversion Inverting the crc after calling ether_crc_le() is unnecessary and breaks multicast. Remove it. Tested-by: David Madore Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b5..4a77006 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); -- cgit v0.10.2 From 3b259e365998291a02488225e32b9f2b73723b3e Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sun, 9 Nov 2008 15:05:30 -0600 Subject: atl1: Do not enumerate options unsupported by chip Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b..aef403d 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; -- cgit v0.10.2 From 3e44017b589f001941723dfdfede2ca6284dddce Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 9 Nov 2008 05:34:47 +0100 Subject: phylib: fix premature freeing of struct mii_bus Commit 46abc02175b3c246dd5141d878f565a8725060c9 ("phylib: give mdio buses a device tree presence") added a call to device_unregister() in a situation where the caller did not intend for the device to be freed yet, but apart from just unregistering the device from the system, device_unregister() does an additional put_device() that is intended to free it. The right function to use in this situation is device_del(), which unregisters the device from the system like device_unregister() does, but without dropping the reference count an additional time. Bug report from Bryan Wu . Signed-off-by: Lennert Buytenhek Tested-by: Bryan Wu Signed-off-by: Jeff Garzik diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef..536bda1 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); -- cgit v0.10.2 From e7ddee9037e7dd43de1ad08b51727e552aedd836 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:44:38 -0500 Subject: cifs: disable sharing session and tcon and add new TCP sharing code The code that allows these structs to be shared is extremely racy. Disable the sharing of SMB and tcon structs for now until we can come up with a way to do this that's race free. We want to continue to share TCP sessions, however since they are required for multiuser mounts. For that, implement a new (hopefully race-free) scheme. Add a new global list of TCP sessions, and take care to get a reference to it whenever we're dealing with one. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index ba8723d..40b5108 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -144,7 +144,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "TCP status: %d\n\tLocal Users To " "Server: %d SecMode: 0x%x Req On Wire: %d", ses->server->tcpStatus, - atomic_read(&ses->server->socketUseCount), + ses->server->srv_count, ses->server->secMode, atomic_read(&ses->server->inFlight)); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index af16a24..2946dab 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,7 +1059,7 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); - INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&cifs_tcp_ses_list); INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); @@ -1089,6 +1089,7 @@ init_cifs(void) GlobalMaxActiveXid = 0; memset(Local_System_Name, 0, 15); rwlock_init(&GlobalSMBSeslock); + rwlock_init(&cifs_tcp_ses_lock); spin_lock_init(&GlobalMid_Lock); if (cifs_max_pending < 2) { diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 13dc484..313f7bf 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -123,6 +123,7 @@ struct cifs_cred { struct TCP_Server_Info { struct list_head tcp_ses_list; struct list_head smb_ses_list; + int srv_count; /* reference counter */ /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -144,7 +145,6 @@ struct TCP_Server_Info { bool svlocal:1; /* local server or remote */ bool noblocksnd; /* use blocking sendmsg */ bool noautotune; /* do not autotune send buf sizes */ - atomic_t socketUseCount; /* number of open cifs sessions on socket */ atomic_t inFlight; /* number of requests on the wire to server */ #ifdef CONFIG_CIFS_STATS2 atomic_t inSend; /* requests trying to send */ @@ -591,13 +591,18 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif - -/* the list of TCP_Server_Info structures, ie each of the sockets +/* + * the list of TCP_Server_Info structures, ie each of the sockets * connecting our client to a distinct server (ip address), is - * chained together by global_cifs_sock_list. The list of all our SMB + * chained together by cifs_tcp_ses_list. The list of all our SMB * sessions (and from that the tree connections) can be found - * by iterating over global_cifs_sock_list */ -GLOBAL_EXTERN struct list_head global_cifs_sock_list; + * by iterating over cifs_tcp_ses_list + */ +GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; + +/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; + GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6f21ecb..0250a99 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,6 +102,7 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); +extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 7f0651b..cd9e9a1 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -664,8 +664,9 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) rc = -EIO; goto neg_err_exit; } - - if (server->socketUseCount.counter > 1) { + read_lock(&cifs_tcp_ses_lock); + if (server->srv_count > 1) { + read_unlock(&cifs_tcp_ses_lock); if (memcmp(server->server_GUID, pSMBr->u.extended_response. GUID, 16) != 0) { @@ -674,9 +675,11 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) pSMBr->u.extended_response.GUID, 16); } - } else + } else { + read_unlock(&cifs_tcp_ses_lock); memcpy(server->server_GUID, pSMBr->u.extended_response.GUID, 16); + } if (count == 16) { server->secType = RawNTLMSSP; @@ -830,12 +833,9 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; + if (ses->server) { + cifs_put_tcp_session(ses->server); + rc = 0; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 30ab8dc..a031425 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -659,6 +659,11 @@ multi_t2_fnd: } } /* end while !EXITING */ + /* take it off the list, if it's not already */ + write_lock(&cifs_tcp_ses_lock); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); + spin_lock(&GlobalMid_Lock); server->tcpStatus = CifsExiting; spin_unlock(&GlobalMid_Lock); @@ -1357,92 +1362,66 @@ cifs_parse_mount_options(char *options, const char *devname, return 0; } -static struct cifsSesInfo * -cifs_find_tcp_session(struct in_addr *target_ip_addr, - struct in6_addr *target_ip6_addr, - char *userName, struct TCP_Server_Info **psrvTcp) +static struct TCP_Server_Info * +cifs_find_tcp_session(struct sockaddr *addr) { struct list_head *tmp; - struct cifsSesInfo *ses; - - *psrvTcp = NULL; - - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (!ses->server) + struct TCP_Server_Info *server; + struct sockaddr_in *addr4 = (struct sockaddr_in *) addr; + struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + + /* + * the demux thread can exit on its own while still in CifsNew + * so don't accept any sockets in that state. Since the + * tcpStatus never changes back to CifsNew it's safe to check + * for this without a lock. + */ + if (server->tcpStatus == CifsNew) continue; - if (target_ip_addr && - ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr) - continue; - else if (target_ip6_addr && - memcmp(&ses->server->addr.sockAddr6.sin6_addr, - target_ip6_addr, sizeof(*target_ip6_addr))) - continue; - /* BB lock server and tcp session; increment use count here?? */ - - /* found a match on the TCP session */ - *psrvTcp = ses->server; + if (addr->sa_family == AF_INET && + (addr4->sin_addr.s_addr != + server->addr.sockAddr.sin_addr.s_addr)) + continue; + else if (addr->sa_family == AF_INET6 && + memcmp(&server->addr.sockAddr6.sin6_addr, + &addr6->sin6_addr, sizeof(addr6->sin6_addr))) + continue; - /* BB check if reconnection needed */ - if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) { - read_unlock(&GlobalSMBSeslock); - /* Found exact match on both TCP and - SMB sessions */ - return ses; - } - /* else tcp and smb sessions need reconnection */ + ++server->srv_count; + write_unlock(&cifs_tcp_ses_lock); + return server; } - read_unlock(&GlobalSMBSeslock); - + write_unlock(&cifs_tcp_ses_lock); return NULL; } -static struct cifsTconInfo * -find_unc(__be32 new_target_ip_addr, char *uncName, char *userName) +void +cifs_put_tcp_session(struct TCP_Server_Info *server) { - struct list_head *tmp; - struct cifsTconInfo *tcon; - __be32 old_ip; - - read_lock(&GlobalSMBSeslock); - - list_for_each(tmp, &GlobalTreeConnectionList) { - cFYI(1, ("Next tcon")); - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if (!tcon->ses || !tcon->ses->server) - continue; - - old_ip = tcon->ses->server->addr.sockAddr.sin_addr.s_addr; - cFYI(1, ("old ip addr: %x == new ip %x ?", - old_ip, new_target_ip_addr)); - - if (old_ip != new_target_ip_addr) - continue; - - /* BB lock tcon, server, tcp session and increment use count? */ - /* found a match on the TCP session */ - /* BB check if reconnection needed */ - cFYI(1, ("IP match, old UNC: %s new: %s", - tcon->treeName, uncName)); + struct task_struct *task; - if (strncmp(tcon->treeName, uncName, MAX_TREE_SIZE)) - continue; + write_lock(&cifs_tcp_ses_lock); + if (--server->srv_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } - cFYI(1, ("and old usr: %s new: %s", - tcon->treeName, uncName)); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); - if (strncmp(tcon->ses->userName, userName, MAX_USERNAME_SIZE)) - continue; - - /* matched smb session (user name) */ - read_unlock(&GlobalSMBSeslock); - return tcon; - } + spin_lock(&GlobalMid_Lock); + server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); - return NULL; + task = xchg(&server->tsk, NULL); + if (task) + force_sig(SIGKILL, task); } int @@ -1881,16 +1860,6 @@ convert_delimiter(char *path, char delim) } } -static void -kill_cifsd(struct TCP_Server_Info *server) -{ - struct task_struct *task; - - task = xchg(&server->tsk, NULL); - if (task) - force_sig(SIGKILL, task); -} - static void setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb) { @@ -2069,21 +2038,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (addr.sa_family == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, - NULL /* no ipv6 addr */, - volume_info.username, &srvTcp); - else if (addr.sa_family == AF_INET6) { - cFYI(1, ("looking for ipv6 address")); - existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6->sin6_addr, - volume_info.username, &srvTcp); - } else { - rc = -EINVAL; - goto out; - } - - if (!srvTcp) { + srvTcp = cifs_find_tcp_session(&addr); + if (srvTcp) { + cFYI(1, ("Existing tcp session with server found")); + } else { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2153,6 +2111,12 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, memcpy(srvTcp->server_RFC1001_name, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; + INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + ++srvTcp->srv_count; + write_lock(&cifs_tcp_ses_lock); + list_add(&srvTcp->tcp_ses_list, + &cifs_tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); } } @@ -2204,8 +2168,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); up(&pSesInfo->sesSem); - if (!rc) - atomic_inc(&srvTcp->socketUseCount); } } @@ -2213,9 +2175,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); - tcon = - find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, - volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); if (tcon->seal != volume_info.seal) @@ -2278,35 +2237,21 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* on error free sesinfo and tcon struct if needed */ mount_fail_check: if (rc) { - /* if session setup failed, use count is zero but - we still need to free cifsd thread */ - if (atomic_read(&srvTcp->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(srvTcp); - } - /* If find_unc succeeded then rc == 0 so we can not end */ - if (tcon) /* up accidently freeing someone elses tcon struct */ + /* If find_unc succeeded then rc == 0 so we can not end */ + /* up accidently freeing someone elses tcon struct */ + if (tcon) tconInfoFree(tcon); + if (existingCifsSes == NULL) { if (pSesInfo) { if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) { - int temp_rc; - temp_rc = CIFSSMBLogoff(xid, pSesInfo); - /* if the socketUseCount is now zero */ - if ((temp_rc == -ESHUTDOWN) && - (pSesInfo->server)) - kill_cifsd(pSesInfo->server); - } else { + (pSesInfo->status == CifsGood)) + CIFSSMBLogoff(xid, pSesInfo); + else { cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(pSesInfo->server); - } + if (pSesInfo->server) + cifs_put_tcp_session( + pSesInfo->server); } sesInfoFree(pSesInfo); /* pSesInfo = NULL; */ @@ -3613,13 +3558,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) if (rc == -EBUSY) { FreeXid(xid); return 0; - } else if (rc == -ESHUTDOWN) { - cFYI(1, ("Waking up socket by sending signal")); - if (ses->server) - kill_cifsd(ses->server); - rc = 0; - } /* else - we have an smb session - left on this socket do not kill cifsd */ + } } else cFYI(1, ("No session or bad tcon")); } -- cgit v0.10.2 From 6a6b97d360702b98c02c7fca4c4e088dcf3a2985 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Nov 2008 10:04:46 +0900 Subject: libata: improve phantom device detection Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 4b47394..9033d16 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1227,10 +1227,19 @@ fsm_start: /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) + if (likely(status & (ATA_ERR | ATA_DF))) { /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else { + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. -- cgit v0.10.2 From 14fbf50d695207754daeb96270b3027a3821121f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:53:46 -0500 Subject: cifs: reinstate sharing of SMB sessions sans races We do this by abandoning the global list of SMB sessions and instead moving to a per-server list. This entails adding a new list head to the TCP_Server_Info struct. The refcounting for the cifsSesInfo is moved to a non-atomic variable. We have to protect it by a lock anyway, so there's no benefit to making it an atomic. The list and refcount are protected by the global cifs_tcp_ses_lock. The patch also adds a new routines to find and put SMB sessions and that properly take and put references under the lock. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 40b5108..59841a6 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,9 +107,9 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp2, *tmp3; struct mid_q_entry *mid_entry; + struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; int i; @@ -122,43 +122,45 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "Servers:"); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); i++; - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || - (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); - } else { - seq_printf(m, + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + if ((ses->serverDomain == NULL) || + (ses->serverOS == NULL) || + (ses->serverNOS == NULL)) { + seq_printf(m, "\nentry for %s not fully " + "displayed\n\t", ses->serverName); + } else { + seq_printf(m, "\n%d) Name: %s Domain: %s Mounts: %d OS:" " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, - atomic_read(&ses->inUse), - ses->serverOS, ses->serverNOS, + ses->ses_count, ses->serverOS, ses->serverNOS, ses->capabilities, ses->status); - } - if (ses->server) { + } seq_printf(m, "TCP status: %d\n\tLocal Users To " - "Server: %d SecMode: 0x%x Req On Wire: %d", - ses->server->tcpStatus, - ses->server->srv_count, - ses->server->secMode, - atomic_read(&ses->server->inFlight)); + "Server: %d SecMode: 0x%x Req On Wire: %d", + server->tcpStatus, server->srv_count, + server->secMode, + atomic_read(&server->inFlight)); #ifdef CONFIG_CIFS_STATS2 seq_printf(m, " In Send: %d In MaxReq Wait: %d", - atomic_read(&ses->server->inSend), - atomic_read(&ses->server->num_waiters)); + atomic_read(&server->inSend), + atomic_read(&server->num_waiters)); #endif seq_puts(m, "\nMIDs:\n"); spin_lock(&GlobalMid_Lock); - list_for_each(tmp1, &ses->server->pending_mid_q) { - mid_entry = list_entry(tmp1, struct + list_for_each(tmp3, &server->pending_mid_q) { + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); seq_printf(m, "State: %d com: %d pid:" @@ -171,9 +173,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) } spin_unlock(&GlobalMid_Lock); } - } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); seq_puts(m, "Shares:"); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 2946dab..a1e9662 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1031,24 +1031,24 @@ static int cifs_oplock_thread(void *dummyarg) static int cifs_dnotify_thread(void *dummyarg) { struct list_head *tmp; - struct cifsSesInfo *ses; + struct TCP_Server_Info *server; do { if (try_to_freeze()) continue; set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(15*HZ); - read_lock(&GlobalSMBSeslock); /* check if any stuck requests that need to be woken up and wakeq so the thread can wake up and error out */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server && atomic_read(&ses->server->inFlight)) - wake_up_all(&ses->server->response_q); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + if (atomic_read(&server->inFlight)) + wake_up_all(&server->response_q); } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } while (!kthread_should_stop()); return 0; @@ -1060,7 +1060,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 313f7bf..631a99f 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -195,14 +195,14 @@ struct cifsUidInfo { * Session structure. One of these for each uid session with a particular host */ struct cifsSesInfo { - struct list_head cifsSessionList; + struct list_head smb_ses_list; struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ #endif struct TCP_Server_Info *server; /* pointer to server info */ - atomic_t inUse; /* # of mounts (tree connections) on this ses */ + int ses_count; /* reference counter */ enum statusEnum status; unsigned overrideSecFlg; /* if non-zero override global sec flags */ __u16 ipc_tid; /* special tid for connection to IPC share */ @@ -602,8 +602,6 @@ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; /* protects cifs_tcp_ses_list and srv_count for each tcp session */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; - -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0250a99..6f21ecb 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,7 +102,6 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); -extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index cd9e9a1..9c95617 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -799,20 +799,16 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) int rc = 0; cFYI(1, ("In SMBLogoff for session disconnect")); - if (ses) - down(&ses->sesSem); - else - return -EIO; - - atomic_dec(&ses->inUse); - if (atomic_read(&ses->inUse) > 0) { - up(&ses->sesSem); - return -EBUSY; - } - if (ses->server == NULL) + /* + * BB: do we need to check validity of ses and server? They should + * always be valid since we have an active reference. If not, that + * should probably be a BUG() + */ + if (!ses || !ses->server) return -EIO; + down(&ses->sesSem); if (ses->need_reconnect) goto session_already_dead; /* no need to send SMBlogoff if uid already closed due to reconnect */ @@ -833,10 +829,6 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - if (ses->server) { - cifs_put_tcp_session(ses->server); - rc = 0; - } up(&ses->sesSem); /* if session dead then we do not need to do ulogoff, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a031425..44130e0 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -144,23 +144,18 @@ cifs_reconnect(struct TCP_Server_Info *server) /* before reconnecting the tcp session, mark the smb session (uid) and the tid bad so they are not used until reconnected */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (ses->server) { - if (ses->server == server) { - ses->need_reconnect = true; - ses->ipc_tid = 0; - } - } - /* else tcp and smb sessions need reconnection */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->need_reconnect = true; + ses->ipc_tid = 0; } + read_unlock(&cifs_tcp_ses_lock); list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) tcon->need_reconnect = true; } - read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -696,29 +691,29 @@ multi_t2_fnd: if (smallbuf) /* no sense logging a debug message if NULL */ cifs_small_buf_release(smallbuf); - read_lock(&GlobalSMBSeslock); + /* + * BB: we shouldn't have to do any of this. It shouldn't be + * possible to exit from the thread with active SMB sessions + */ + read_lock(&cifs_tcp_ses_lock); if (list_empty(&server->pending_mid_q)) { /* loop through server session structures attached to this and mark them dead */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = - list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) { - ses->status = CifsExiting; - ses->server = NULL; - } + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, + smb_ses_list); + ses->status = CifsExiting; + ses->server = NULL; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } else { /* although we can not zero the server struct pointer yet, since there are active requests which may depnd on them, mark the corresponding SMB sessions as exiting too */ - list_for_each(tmp, &GlobalSMBSessionList) { + list_for_each(tmp, &server->smb_ses_list) { ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->status = CifsExiting; + smb_ses_list); + ses->status = CifsExiting; } spin_lock(&GlobalMid_Lock); @@ -733,7 +728,7 @@ multi_t2_fnd: } } spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); /* 1/8th of sec is more than enough time for them to exit */ msleep(125); } @@ -755,14 +750,13 @@ multi_t2_fnd: if there are any pointing to this (e.g if a crazy root user tried to kill cifsd kernel thread explicitly this might happen) */ - write_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->server = NULL; + /* BB: This shouldn't be necessary, see above */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->server = NULL; } - write_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); kfree(server->hostname); task_to_wake = xchg(&server->tsk, NULL); @@ -1401,7 +1395,7 @@ cifs_find_tcp_session(struct sockaddr *addr) return NULL; } -void +static void cifs_put_tcp_session(struct TCP_Server_Info *server) { struct task_struct *task; @@ -1424,6 +1418,50 @@ cifs_put_tcp_session(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static struct cifsSesInfo * +cifs_find_smb_ses(struct TCP_Server_Info *server, char *username) +{ + struct list_head *tmp; + struct cifsSesInfo *ses; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + if (strncmp(ses->userName, username, MAX_USERNAME_SIZE)) + continue; + + ++ses->ses_count; + write_unlock(&cifs_tcp_ses_lock); + return ses; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_smb_ses(struct cifsSesInfo *ses) +{ + int xid; + struct TCP_Server_Info *server = ses->server; + + write_lock(&cifs_tcp_ses_lock); + if (--ses->ses_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&ses->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + if (ses->status == CifsGood) { + xid = GetXid(); + CIFSSMBLogoff(xid, ses); + _FreeXid(xid); + } + sesInfoFree(ses); + cifs_put_tcp_session(server); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -1958,7 +1996,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; - struct cifsSesInfo *existingCifsSes = NULL; struct cifsTconInfo *tcon = NULL; struct TCP_Server_Info *srvTcp = NULL; @@ -2112,6 +2149,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + INIT_LIST_HEAD(&srvTcp->smb_ses_list); ++srvTcp->srv_count; write_lock(&cifs_tcp_ses_lock); list_add(&srvTcp->tcp_ses_list, @@ -2120,10 +2158,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (existingCifsSes) { - pSesInfo = existingCifsSes; + pSesInfo = cifs_find_smb_ses(srvTcp, volume_info.username); + if (pSesInfo) { cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); + /* + * The existing SMB session already has a reference to srvTcp, + * so we can put back the extra one we got before + */ + cifs_put_tcp_session(srvTcp); + down(&pSesInfo->sesSem); if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); @@ -2134,41 +2178,44 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else if (!rc) { cFYI(1, ("Existing smb sess not found")); pSesInfo = sesInfoAlloc(); - if (pSesInfo == NULL) + if (pSesInfo == NULL) { rc = -ENOMEM; - else { - pSesInfo->server = srvTcp; - sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server->sin_addr.s_addr)); + goto mount_fail_check; } - if (!rc) { - /* volume_info.password freed at unmount */ - if (volume_info.password) { - pSesInfo->password = volume_info.password; - /* set to NULL to prevent freeing on exit */ - volume_info.password = NULL; - } - if (volume_info.username) - strncpy(pSesInfo->userName, - volume_info.username, - MAX_USERNAME_SIZE); - if (volume_info.domainname) { - int len = strlen(volume_info.domainname); - pSesInfo->domainName = - kmalloc(len + 1, GFP_KERNEL); - if (pSesInfo->domainName) - strcpy(pSesInfo->domainName, - volume_info.domainname); - } - pSesInfo->linux_uid = volume_info.linux_uid; - pSesInfo->overrideSecFlg = volume_info.secFlg; - down(&pSesInfo->sesSem); - /* BB FIXME need to pass vol->secFlgs BB */ - rc = cifs_setup_session(xid, pSesInfo, - cifs_sb->local_nls); - up(&pSesInfo->sesSem); - } + /* new SMB session uses our srvTcp ref */ + pSesInfo->server = srvTcp; + sprintf(pSesInfo->serverName, "%u.%u.%u.%u", + NIPQUAD(sin_server->sin_addr.s_addr)); + + write_lock(&cifs_tcp_ses_lock); + list_add(&pSesInfo->smb_ses_list, &srvTcp->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + /* volume_info.password freed at unmount */ + if (volume_info.password) { + pSesInfo->password = volume_info.password; + /* set to NULL to prevent freeing on exit */ + volume_info.password = NULL; + } + if (volume_info.username) + strncpy(pSesInfo->userName, volume_info.username, + MAX_USERNAME_SIZE); + if (volume_info.domainname) { + int len = strlen(volume_info.domainname); + pSesInfo->domainName = kmalloc(len + 1, GFP_KERNEL); + if (pSesInfo->domainName) + strcpy(pSesInfo->domainName, + volume_info.domainname); + } + pSesInfo->linux_uid = volume_info.linux_uid; + pSesInfo->overrideSecFlg = volume_info.secFlg; + down(&pSesInfo->sesSem); + + /* BB FIXME need to pass vol->secFlgs BB */ + rc = cifs_setup_session(xid, pSesInfo, + cifs_sb->local_nls); + up(&pSesInfo->sesSem); } /* search for existing tcon to this server share */ @@ -2209,11 +2256,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, tcon->Flags)); } } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->seal = volume_info.seal; - } else + if (rc) goto mount_fail_check; + tcon->seal = volume_info.seal; } /* we can have only one retry value for a connection @@ -2234,29 +2279,19 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; -/* on error free sesinfo and tcon struct if needed */ mount_fail_check: + /* on error free sesinfo and tcon struct if needed */ if (rc) { /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) tconInfoFree(tcon); - if (existingCifsSes == NULL) { - if (pSesInfo) { - if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) - CIFSSMBLogoff(xid, pSesInfo); - else { - cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) - cifs_put_tcp_session( - pSesInfo->server); - } - sesInfoFree(pSesInfo); - /* pSesInfo = NULL; */ - } - } + /* should also end up putting our tcp session ref if needed */ + if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + else + cifs_put_tcp_session(srvTcp); } else { atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; @@ -3551,16 +3586,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) } DeleteTconOplockQEntries(cifs_sb->tcon); tconInfoFree(cifs_sb->tcon); - if ((ses) && (ses->server)) { - /* save off task so we do not refer to ses later */ - cFYI(1, ("About to do SMBLogoff ")); - rc = CIFSSMBLogoff(xid, ses); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - } else - cFYI(1, ("No session or bad tcon")); + cifs_put_smb_ses(ses); } cifs_sb->tcon = NULL; @@ -3568,8 +3594,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepathlen = 0; cifs_sb->prepath = NULL; kfree(tmp); - if (ses) - sesInfoFree(ses); FreeXid(xid); return rc; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 88786ba..46c8c7b 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -75,12 +75,11 @@ sesInfoAlloc(void) ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&sesInfoAllocCount); ret_buf->status = CifsNew; - list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList); + ++ret_buf->ses_count; + INIT_LIST_HEAD(&ret_buf->smb_ses_list); init_MUTEX(&ret_buf->sesSem); - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -93,10 +92,7 @@ sesInfoFree(struct cifsSesInfo *buf_to_free) return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&sesInfoAllocCount); - list_del(&buf_to_free->cifsSessionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->serverOS); kfree(buf_to_free->serverDomain); kfree(buf_to_free->serverNOS); @@ -350,9 +346,9 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , if (current->fsuid != treeCon->ses->linux_uid) { cFYI(1, ("Multiuser mode and UID " "did not match tcon uid")); - read_lock(&GlobalSMBSeslock); - list_for_each(temp_item, &GlobalSMBSessionList) { - ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList); + read_lock(&cifs_tcp_ses_lock); + list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { + ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list); if (ses->linux_uid == current->fsuid) { if (ses->server == treeCon->ses->server) { cFYI(1, ("found matching uid substitute right smb_uid")); @@ -364,7 +360,7 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , } } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } } } -- cgit v0.10.2 From d82c2df54e2f7e447476350848d8eccc8d2fe46a Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 15 Nov 2008 00:07:26 +0000 Subject: [CIFS] minor cleanup to cifs_mount Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 44130e0..a3dc0d7 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1368,7 +1368,6 @@ cifs_find_tcp_session(struct sockaddr *addr) list_for_each(tmp, &cifs_tcp_ses_list) { server = list_entry(tmp, struct TCP_Server_Info, tcp_ses_list); - /* * the demux thread can exit on its own while still in CifsNew * so don't accept any sockets in that state. Since the @@ -1389,6 +1388,7 @@ cifs_find_tcp_session(struct sockaddr *addr) ++server->srv_count; write_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("Existing tcp session with server found")); return server; } write_unlock(&cifs_tcp_ses_lock); @@ -2076,9 +2076,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } srvTcp = cifs_find_tcp_session(&addr); - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2292,45 +2290,41 @@ mount_fail_check: cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); - } else { - atomic_inc(&tcon->useCount); - cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; - - /* do not care if following two calls succeed - informational */ - if (!tcon->ipc) { - CIFSSMBQFSDeviceInfo(xid, tcon); - CIFSSMBQFSAttributeInfo(xid, tcon); - } - - /* tell server which Unix caps we support */ - if (tcon->ses->capabilities & CAP_UNIX) - /* reset of caps checks mount to see if unix extensions - disabled for just this mount */ - reset_cifs_unix_caps(xid, tcon, sb, &volume_info); - else - tcon->unix_ext = 0; /* server does not support them */ - - /* convert forward to back slashes in prepath here if needed */ - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) - convert_delimiter(cifs_sb->prepath, - CIFS_DIR_SEP(cifs_sb)); + goto out; + } + atomic_inc(&tcon->useCount); + cifs_sb->tcon = tcon; + tcon->ses = pSesInfo; - if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { - cifs_sb->rsize = 1024 * 127; - cFYI(DBG2, - ("no very large read support, rsize now 127K")); - } - if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) - cifs_sb->wsize = min(cifs_sb->wsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); - if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) - cifs_sb->rsize = min(cifs_sb->rsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); + /* do not care if following two calls succeed - informational */ + if (!tcon->ipc) { + CIFSSMBQFSDeviceInfo(xid, tcon); + CIFSSMBQFSAttributeInfo(xid, tcon); } + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + /* reset of caps checks mount to see if unix extensions + disabled for just this mount */ + reset_cifs_unix_caps(xid, tcon, sb, &volume_info); + else + tcon->unix_ext = 0; /* server does not support them */ + + /* convert forward to back slashes in prepath here if needed */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) + convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb)); + + if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { + cifs_sb->rsize = 1024 * 127; + cFYI(DBG2, ("no very large read support, rsize now 127K")); + } + if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) + cifs_sb->wsize = min(cifs_sb->wsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) + cifs_sb->rsize = min(cifs_sb->rsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + /* volume_info.password is freed above when existing session found (in which case it is not needed anymore) but when new sesion is created the password ptr is put in the new session structure (in which case the -- cgit v0.10.2 From cecf61bdee426a3e0a014f7e26990d09c71ed458 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Fri, 14 Nov 2008 16:37:54 -0800 Subject: rtc: rtc-sun4v fixes, revised - simplified code - use platform_driver_probe - removed locking: it's provided by rtc subsystem Signed-off-by: Alessandro Zummo Signed-off-by: David S. Miller diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccb..5b22610 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller */ @@ -7,21 +7,11 @@ #include #include #include -#include #include #include #include -MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller "); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From df81d2371aeca0f7474f197a3090830899016e39 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Wed, 5 Nov 2008 00:09:12 +0100 Subject: [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which should contain the length in bytes of the transferred data. This would be correct if reply was a u32 *. However it is a void * here, so we need to read the value at (reply+20) instead. The value at (reply+5) is usually 0xff0000, which is apparently 'large enough' and didn't cause any trouble until 2.6.27 where commit 427e59f09fdba387547106de7bab980b7fff77be Author: James Bottomley Date: Sat Mar 8 18:24:17 2008 -0600 [SCSI] make use of the residue value caused this to become visible through e.g. iostat -x . Signed-off-by: Miquel van Smoorenburg Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8aba4fd..6194ed5 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) hba_status = detailed_status >> 8; // calculate resid for sg - scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5)); + scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20)); pHba = (adpt_hba*) cmd->device->host->hostdata[0]; @@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) case I2O_SCSI_DSC_SUCCESS: cmd->result = (DID_OK << 16); // handle underflow - if(readl(reply+5) < cmd->underflow ) { + if (readl(reply+20) < cmd->underflow) { cmd->result = (DID_ERROR <<16); printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); } -- cgit v0.10.2 From c39555d6edd0142972f577405d5259879ecc1635 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Fri, 14 Nov 2008 17:46:22 -0500 Subject: ALSA: hda: STAC_VREF_EVENT value change Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the unsol response value is only 6-bits width and the former value was 1<<6 which is an overrun. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1633ef2c..f205570 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -36,9 +36,11 @@ #include "hda_beep.h" #define NUM_CONTROL_ALLOC 32 + +#define STAC_VREF_EVENT 0x00 +#define STAC_INSERT_EVENT 0x10 #define STAC_PWR_EVENT 0x20 #define STAC_HP_EVENT 0x30 -#define STAC_VREF_EVENT 0x40 enum { STAC_REF, -- cgit v0.10.2 From d6f35e3f0da14a5eb02114708d88ae2f59dc8283 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 Nov 2008 19:08:18 +0100 Subject: ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device Error handling code following a kzalloc should free the allocated data. The error handling code is adjusted to call pci_disable_device(pci); as well, as done later in the function The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 0e06c6c..73de6e9 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -1229,8 +1229,11 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id return -ENOMEM; } - if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) + if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) { + kfree(mgr); + pci_disable_device(pci); return -ENODEV; + } card_name = pcxhr_board_params[pci_id->driver_data].board_name; mgr->playback_chips = pcxhr_board_params[pci_id->driver_data].playback_chips; mgr->capture_chips = pcxhr_board_params[pci_id->driver_data].capture_chips; -- cgit v0.10.2 From 8141c7f3e7aee618312fa1c15109e1219de784a7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 10:20:36 -0800 Subject: Move "exit_robust_list" into mm_release() We don't want to get rid of the futexes just at exit() time, we want to drop them when doing an execve() too, since that gets rid of the previous VM image too. Doing it at mm_release() time means that we automatically always do it when we disassociate a VM map from the task. Reported-by: pageexec@freemail.hu Cc: Andrew Morton Cc: Nick Piggin Cc: Hugh Dickins Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Brad Spengler Cc: Alex Efros Cc: Peter Zijlstra Cc: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/exit.c b/kernel/exit.c index ae2b92b..2d8be7e 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include /* for audit_free() */ #include @@ -1059,14 +1058,6 @@ NORET_TYPE void do_exit(long code) exit_itimers(tsk->signal); } acct_collect(code, group_dead); -#ifdef CONFIG_FUTEX - if (unlikely(tsk->robust_list)) - exit_robust_list(tsk); -#ifdef CONFIG_COMPAT - if (unlikely(tsk->compat_robust_list)) - compat_exit_robust_list(tsk); -#endif -#endif if (group_dead) tty_audit_exit(); if (unlikely(tsk->audit_context)) diff --git a/kernel/fork.c b/kernel/fork.c index f608356..2a372a0 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -519,6 +520,16 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) { struct completion *vfork_done = tsk->vfork_done; + /* Get rid of any futexes when releasing the mm */ +#ifdef CONFIG_FUTEX + if (unlikely(tsk->robust_list)) + exit_robust_list(tsk); +#ifdef CONFIG_COMPAT + if (unlikely(tsk->compat_robust_list)) + compat_exit_robust_list(tsk); +#endif +#endif + /* Get rid of any cached register state */ deactivate_mm(tsk, mm); -- cgit v0.10.2 From 8e5f262bfcd90c041160a491a238661ebbb584a4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 15 Nov 2008 19:28:54 +0100 Subject: ALSA: hda - Check model type instead of SSID in patch_92hd71bxx() Check board preset model instead of codec->subsystem_id in patch_92hd71bxx() so that other hardwares configured via the model option work like the given model. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f205570..0df6f97 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4488,8 +4488,8 @@ again: codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; break; case 0x111d7608: /* 5 Port with Analog Mixer */ - switch (codec->subsystem_id) { - case 0x103c361a: + switch (spec->board_config) { + case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); -- cgit v0.10.2 From 27123cbc264de89ce6951b1b4c84c223eb0f1702 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:10:19 +0100 Subject: m68k: Fix off-by-one in m68k_setup_user_interrupt() commit 69961c375288bdab7604e0bb1c8d22999bb8a347 ("[PATCH] m68k/Atari: Interrupt updates") added a BUG_ON() with an incorrect upper bound comparison, which causes an early crash on VME boards, where IRQ_USER is 8, cnt is 192 and NR_IRQS is 200. Reported-by: Stephen N Chivers Tested-by: Kars de Jong Signed-off-by: Geert Uytterhoeven Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 7e8a0d3..761ee04 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -133,7 +133,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, { int i; - BUG_ON(IRQ_USER + cnt >= NR_IRQS); + BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) irq_controller[IRQ_USER + i] = &user_irq_controller; -- cgit v0.10.2 From fb75109834ca5c5e2f0f17f0c9e20182ea55b65f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:54:46 +0100 Subject: misc: C2port needs m68k allmodconfig: | drivers/misc/c2port/core.c: In function 'c2port_reset': | drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type | drivers/misc/c2port/core.c: In function 'c2port_strobe_ck': | drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type Include to fix it, as m68k's local_irq_enable() needs to know about struct task_struct. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 976b35d..0207dd5 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -18,6 +18,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From 748f1a2ed7a68e15b28a1da3559afbebba121772 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 14 Nov 2008 16:25:01 +0900 Subject: mm: remove unevictable's show_page_path Hugh Dickins reported show_page_path() is buggy and unsafe because - lack dput() against d_find_alias() - don't concern vma->vm_mm->owner == NULL - lack lock_page() it was only for debugging, so rather than trying to fix it, just remove it now. Reported-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: KOSAKI Motohiro CC: Lee Schermerhorn CC: Rik van Riel Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 3b58602..c141b3e 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2368,39 +2368,6 @@ int page_evictable(struct page *page, struct vm_area_struct *vma) return 1; } -static void show_page_path(struct page *page) -{ - char buf[256]; - if (page_is_file_cache(page)) { - struct address_space *mapping = page->mapping; - struct dentry *dentry; - pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); - - spin_lock(&mapping->i_mmap_lock); - dentry = d_find_alias(mapping->host); - printk(KERN_INFO "rescued: %s %lu\n", - dentry_path(dentry, buf, 256), pgoff); - spin_unlock(&mapping->i_mmap_lock); - } else { -#if defined(CONFIG_MM_OWNER) && defined(CONFIG_MMU) - struct anon_vma *anon_vma; - struct vm_area_struct *vma; - - anon_vma = page_lock_anon_vma(page); - if (!anon_vma) - return; - - list_for_each_entry(vma, &anon_vma->head, anon_vma_node) { - printk(KERN_INFO "rescued: anon %s\n", - vma->vm_mm->owner->comm); - break; - } - page_unlock_anon_vma(anon_vma); -#endif - } -} - - /** * check_move_unevictable_page - check page for evictability and move to appropriate zone lru list * @page: page to check evictability and move to appropriate lru list @@ -2421,8 +2388,6 @@ retry: if (page_evictable(page, NULL)) { enum lru_list l = LRU_INACTIVE_ANON + page_is_file_cache(page); - show_page_path(page); - __dec_zone_state(zone, NR_UNEVICTABLE); list_move(&page->lru, &zone->lru[l].list); __inc_zone_state(zone, NR_INACTIVE_ANON + l); -- cgit v0.10.2 From 52168e60f7d86d83124903098ac8c2dba93cd1c4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 14 Nov 2008 13:47:31 +0000 Subject: Revert "x86: blacklist DMAR on Intel G31/G33 chipsets" This reverts commit e51af6630848406fc97adbd71443818cdcda297b, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba898647aeb4ee770b803c922f595e97731 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index e4a552d..0b500c5 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -6,7 +6,6 @@ extern void no_iommu_init(void); extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; -extern int dmar_disabled; extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 3ce029f..1b894b7 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -188,20 +188,6 @@ static void __init ati_bugs_contd(int num, int slot, int func) } #endif -#ifdef CONFIG_DMAR -static void __init intel_g33_dmar(int num, int slot, int func) -{ - struct acpi_table_header *dmar_tbl; - acpi_status status; - - status = acpi_get_table(ACPI_SIG_DMAR, 0, &dmar_tbl); - if (ACPI_SUCCESS(status)) { - printk(KERN_INFO "BIOS BUG: DMAR advertised on Intel G31/G33 chipset -- ignoring\n"); - dmar_disabled = 1; - } -} -#endif - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -225,10 +211,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, -#ifdef CONFIG_DMAR - { PCI_VENDOR_ID_INTEL, 0x29c0, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar }, -#endif {} }; -- cgit v0.10.2 From d091c2f58ba32029495a933b721e8e02fbd12caa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 12 Nov 2008 21:16:43 +0100 Subject: Add 'pr_fmt()' format modifier to pr_xyz macros. A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky Signed-off-by: Linus Torvalds diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fba141d..dc7e0d0 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -318,32 +318,36 @@ static inline char *pack_hex_byte(char *buf, u8 byte) return buf; } -#define pr_emerg(fmt, arg...) \ - printk(KERN_EMERG fmt, ##arg) -#define pr_alert(fmt, arg...) \ - printk(KERN_ALERT fmt, ##arg) -#define pr_crit(fmt, arg...) \ - printk(KERN_CRIT fmt, ##arg) -#define pr_err(fmt, arg...) \ - printk(KERN_ERR fmt, ##arg) -#define pr_warning(fmt, arg...) \ - printk(KERN_WARNING fmt, ##arg) -#define pr_notice(fmt, arg...) \ - printk(KERN_NOTICE fmt, ##arg) -#define pr_info(fmt, arg...) \ - printk(KERN_INFO fmt, ##arg) +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) /* If you are writing a driver, please use dev_dbg instead */ #if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) #define pr_debug(fmt, ...) do { \ - dynamic_pr_debug(fmt, ##__VA_ARGS__); \ + dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \ } while (0) #elif defined(DEBUG) -#define pr_debug(fmt, arg...) \ - printk(KERN_DEBUG fmt, ##arg) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else -#define pr_debug(fmt, arg...) \ - ({ if (0) printk(KERN_DEBUG fmt, ##arg); 0; }) +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) #endif /* -- cgit v0.10.2 From 0d3b71009737511ea937ac405205fd8214b898bb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 13 Nov 2008 20:14:17 +0800 Subject: LIS3LV02Dx: remove unused #include The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 752b5c4..c002144 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 8f7b0ba1c853919b85b54774775f567f30006107 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 15 Nov 2008 01:15:43 +0000 Subject: Fix inotify watch removal/umount races Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro Acked-by: Greg KH Signed-off-by: Linus Torvalds diff --git a/fs/inotify.c b/fs/inotify.c index 690e725..7bbed1b 100644 --- a/fs/inotify.c +++ b/fs/inotify.c @@ -106,6 +106,20 @@ void get_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(get_inotify_watch); +int pin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + atomic_inc(&watch->count); + return 1; + } + spin_unlock(&sb_lock); + return 0; +} + /** * put_inotify_watch - decrements the ref count on a given watch. cleans up * watch references if the count reaches zero. inotify_watch is freed by @@ -124,6 +138,13 @@ void put_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(put_inotify_watch); +void unpin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + deactivate_super(sb); +} + /* * inotify_handle_get_wd - returns the next WD for use by the given handle * @@ -479,6 +500,112 @@ void inotify_init_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(inotify_init_watch); +/* + * Watch removals suck violently. To kick the watch out we need (in this + * order) inode->inotify_mutex and ih->mutex. That's fine if we have + * a hold on inode; however, for all other cases we need to make damn sure + * we don't race with umount. We can *NOT* just grab a reference to a + * watch - inotify_unmount_inodes() will happily sail past it and we'll end + * with reference to inode potentially outliving its superblock. Ideally + * we just want to grab an active reference to superblock if we can; that + * will make sure we won't go into inotify_umount_inodes() until we are + * done. Cleanup is just deactivate_super(). However, that leaves a messy + * case - what if we *are* racing with umount() and active references to + * superblock can't be acquired anymore? We can bump ->s_count, grab + * ->s_umount, which will almost certainly wait until the superblock is shut + * down and the watch in question is pining for fjords. That's fine, but + * there is a problem - we might have hit the window between ->s_active + * getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock + * is past the point of no return and is heading for shutdown) and the + * moment when deactivate_super() acquires ->s_umount. We could just do + * drop_super() yield() and retry, but that's rather antisocial and this + * stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having + * found that we'd got there first (i.e. that ->s_root is non-NULL) we know + * that we won't race with inotify_umount_inodes(). So we could grab a + * reference to watch and do the rest as above, just with drop_super() instead + * of deactivate_super(), right? Wrong. We had to drop ih->mutex before we + * could grab ->s_umount. So the watch could've been gone already. + * + * That still can be dealt with - we need to save watch->wd, do idr_find() + * and compare its result with our pointer. If they match, we either have + * the damn thing still alive or we'd lost not one but two races at once, + * the watch had been killed and a new one got created with the same ->wd + * at the same address. That couldn't have happened in inotify_destroy(), + * but inotify_rm_wd() could run into that. Still, "new one got created" + * is not a problem - we have every right to kill it or leave it alone, + * whatever's more convenient. + * + * So we can use idr_find(...) == watch && watch->inode->i_sb == sb as + * "grab it and kill it" check. If it's been our original watch, we are + * fine, if it's a newcomer - nevermind, just pretend that we'd won the + * race and kill the fscker anyway; we are safe since we know that its + * superblock won't be going away. + * + * And yes, this is far beyond mere "not very pretty"; so's the entire + * concept of inotify to start with. + */ + +/** + * pin_to_kill - pin the watch down for removal + * @ih: inotify handle + * @watch: watch to kill + * + * Called with ih->mutex held, drops it. Possible return values: + * 0 - nothing to do, it has died + * 1 - remove it, drop the reference and deactivate_super() + * 2 - remove it, drop the reference and drop_super(); we tried hard to avoid + * that variant, since it involved a lot of PITA, but that's the best that + * could've been done. + */ +static int pin_to_kill(struct inotify_handle *ih, struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + s32 wd = watch->wd; + + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 1; /* the best outcome */ + } + sb->s_count++; + spin_unlock(&sb_lock); + mutex_unlock(&ih->mutex); /* can't grab ->s_umount under it */ + down_read(&sb->s_umount); + if (likely(!sb->s_root)) { + /* fs is already shut down; the watch is dead */ + drop_super(sb); + return 0; + } + /* raced with the final deactivate_super() */ + mutex_lock(&ih->mutex); + if (idr_find(&ih->idr, wd) != watch || watch->inode->i_sb != sb) { + /* the watch is dead */ + mutex_unlock(&ih->mutex); + drop_super(sb); + return 0; + } + /* still alive or freed and reused with the same sb and wd; kill */ + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 2; +} + +static void unpin_and_kill(struct inotify_watch *watch, int how) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + switch (how) { + case 1: + deactivate_super(sb); + break; + case 2: + drop_super(sb); + } +} + /** * inotify_destroy - clean up and destroy an inotify instance * @ih: inotify handle @@ -490,11 +617,15 @@ void inotify_destroy(struct inotify_handle *ih) * pretty. We cannot do a simple iteration over the list, because we * do not know the inode until we iterate to the watch. But we need to * hold inode->inotify_mutex before ih->mutex. The following works. + * + * AV: it had to become even uglier to start working ;-/ */ while (1) { struct inotify_watch *watch; struct list_head *watches; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watches = &ih->watches; @@ -503,8 +634,10 @@ void inotify_destroy(struct inotify_handle *ih) break; } watch = list_first_entry(watches, struct inotify_watch, h_list); - get_inotify_watch(watch); - mutex_unlock(&ih->mutex); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + continue; inode = watch->inode; mutex_lock(&inode->inotify_mutex); @@ -518,7 +651,7 @@ void inotify_destroy(struct inotify_handle *ih) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); } /* free this handle: the put matching the get in inotify_init() */ @@ -719,7 +852,9 @@ void inotify_evict_watch(struct inotify_watch *watch) int inotify_rm_wd(struct inotify_handle *ih, u32 wd) { struct inotify_watch *watch; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watch = idr_find(&ih->idr, wd); @@ -727,9 +862,12 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); return -EINVAL; } - get_inotify_watch(watch); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + return 0; + inode = watch->inode; - mutex_unlock(&ih->mutex); mutex_lock(&inode->inotify_mutex); mutex_lock(&ih->mutex); @@ -740,7 +878,7 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); return 0; } diff --git a/include/linux/inotify.h b/include/linux/inotify.h index bd57857..37ea289 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -134,6 +134,8 @@ extern void inotify_remove_watch_locked(struct inotify_handle *, struct inotify_watch *); extern void get_inotify_watch(struct inotify_watch *); extern void put_inotify_watch(struct inotify_watch *); +extern int pin_inotify_watch(struct inotify_watch *); +extern void unpin_inotify_watch(struct inotify_watch *); #else @@ -228,6 +230,15 @@ static inline void put_inotify_watch(struct inotify_watch *watch) { } +extern inline int pin_inotify_watch(struct inotify_watch *watch) +{ + return 0; +} + +extern inline void unpin_inotify_watch(struct inotify_watch *watch) +{ +} + #endif /* CONFIG_INOTIFY */ #endif /* __KERNEL __ */ diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 8ba0e0d..8b50944 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -24,6 +24,7 @@ struct audit_chunk { struct list_head trees; /* with root here */ int dead; int count; + atomic_long_t refs; struct rcu_head head; struct node { struct list_head list; @@ -56,7 +57,8 @@ static LIST_HEAD(prune_list); * tree is refcounted; one reference for "some rules on rules_list refer to * it", one for each chunk with pointer to it. * - * chunk is refcounted by embedded inotify_watch. + * chunk is refcounted by embedded inotify_watch + .refs (non-zero refcount + * of watch contributes 1 to .refs). * * node.index allows to get from node.list to containing chunk. * MSB of that sucker is stolen to mark taggings that we might have to @@ -121,6 +123,7 @@ static struct audit_chunk *alloc_chunk(int count) INIT_LIST_HEAD(&chunk->hash); INIT_LIST_HEAD(&chunk->trees); chunk->count = count; + atomic_long_set(&chunk->refs, 1); for (i = 0; i < count; i++) { INIT_LIST_HEAD(&chunk->owners[i].list); chunk->owners[i].index = i; @@ -129,9 +132,8 @@ static struct audit_chunk *alloc_chunk(int count) return chunk; } -static void __free_chunk(struct rcu_head *rcu) +static void free_chunk(struct audit_chunk *chunk) { - struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); int i; for (i = 0; i < chunk->count; i++) { @@ -141,14 +143,16 @@ static void __free_chunk(struct rcu_head *rcu) kfree(chunk); } -static inline void free_chunk(struct audit_chunk *chunk) +void audit_put_chunk(struct audit_chunk *chunk) { - call_rcu(&chunk->head, __free_chunk); + if (atomic_long_dec_and_test(&chunk->refs)) + free_chunk(chunk); } -void audit_put_chunk(struct audit_chunk *chunk) +static void __put_chunk(struct rcu_head *rcu) { - put_inotify_watch(&chunk->watch); + struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); + audit_put_chunk(chunk); } enum {HASH_SIZE = 128}; @@ -176,7 +180,7 @@ struct audit_chunk *audit_tree_lookup(const struct inode *inode) list_for_each_entry_rcu(p, list, hash) { if (p->watch.inode == inode) { - get_inotify_watch(&p->watch); + atomic_long_inc(&p->refs); return p; } } @@ -194,17 +198,49 @@ int audit_tree_match(struct audit_chunk *chunk, struct audit_tree *tree) /* tagging and untagging inodes with trees */ -static void untag_chunk(struct audit_chunk *chunk, struct node *p) +static struct audit_chunk *find_chunk(struct node *p) +{ + int index = p->index & ~(1U<<31); + p -= index; + return container_of(p, struct audit_chunk, owners[0]); +} + +static void untag_chunk(struct node *p) { + struct audit_chunk *chunk = find_chunk(p); struct audit_chunk *new; struct audit_tree *owner; int size = chunk->count - 1; int i, j; + if (!pin_inotify_watch(&chunk->watch)) { + /* + * Filesystem is shutting down; all watches are getting + * evicted, just take it off the node list for this + * tree and let the eviction logics take care of the + * rest. + */ + owner = p->owner; + if (owner->root == chunk) { + list_del_init(&owner->same_root); + owner->root = NULL; + } + list_del_init(&p->list); + p->owner = NULL; + put_tree(owner); + return; + } + + spin_unlock(&hash_lock); + + /* + * pin_inotify_watch() succeeded, so the watch won't go away + * from under us. + */ mutex_lock(&chunk->watch.inode->inotify_mutex); if (chunk->dead) { mutex_unlock(&chunk->watch.inode->inotify_mutex); - return; + goto out; } owner = p->owner; @@ -221,7 +257,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; } new = alloc_chunk(size); @@ -263,7 +299,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; Fallback: // do the best we can @@ -277,6 +313,9 @@ Fallback: put_tree(owner); spin_unlock(&hash_lock); mutex_unlock(&chunk->watch.inode->inotify_mutex); +out: + unpin_inotify_watch(&chunk->watch); + spin_lock(&hash_lock); } static int create_chunk(struct inode *inode, struct audit_tree *tree) @@ -387,13 +426,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) return 0; } -static struct audit_chunk *find_chunk(struct node *p) -{ - int index = p->index & ~(1U<<31); - p -= index; - return container_of(p, struct audit_chunk, owners[0]); -} - static void kill_rules(struct audit_tree *tree) { struct audit_krule *rule, *next; @@ -431,17 +463,10 @@ static void prune_one(struct audit_tree *victim) spin_lock(&hash_lock); while (!list_empty(&victim->chunks)) { struct node *p; - struct audit_chunk *chunk; p = list_entry(victim->chunks.next, struct node, list); - chunk = find_chunk(p); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, p); - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(p); } spin_unlock(&hash_lock); put_tree(victim); @@ -469,7 +494,6 @@ static void trim_marked(struct audit_tree *tree) while (!list_empty(&tree->chunks)) { struct node *node; - struct audit_chunk *chunk; node = list_entry(tree->chunks.next, struct node, list); @@ -477,14 +501,7 @@ static void trim_marked(struct audit_tree *tree) if (!(node->index & (1U<<31))) break; - chunk = find_chunk(node); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, node); - - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(node); } if (!tree->root && !tree->goner) { tree->goner = 1; @@ -878,7 +895,7 @@ static void handle_event(struct inotify_watch *watch, u32 wd, u32 mask, static void destroy_watch(struct inotify_watch *watch) { struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch); - free_chunk(chunk); + call_rcu(&chunk->head, __put_chunk); } static const struct inotify_operations rtree_inotify_ops = { diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index b7d354e..9fd85a4 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1094,8 +1094,8 @@ static void audit_inotify_unregister(struct list_head *in_list) list_for_each_entry_safe(p, n, in_list, ilist) { list_del(&p->ilist); inotify_rm_watch(audit_ih, &p->wdata); - /* the put matching the get in audit_do_del_rule() */ - put_inotify_watch(&p->wdata); + /* the unpin matching the pin in audit_do_del_rule() */ + unpin_inotify_watch(&p->wdata); } } @@ -1389,9 +1389,13 @@ static inline int audit_del_rule(struct audit_entry *entry, /* Put parent on the inotify un-registration * list. Grab a reference before releasing * audit_filter_mutex, to be released in - * audit_inotify_unregister(). */ - list_add(&parent->ilist, &inotify_list); - get_inotify_watch(&parent->wdata); + * audit_inotify_unregister(). + * If filesystem is going away, just leave + * the sucker alone, eviction will take + * care of it. + */ + if (pin_inotify_watch(&parent->wdata)) + list_add(&parent->ilist, &inotify_list); } } } -- cgit v0.10.2 From 9bf1a2445f3c569098b8de7097ca324e65abecc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 13:42:56 -0800 Subject: Linux 2.6.28-rc5 diff --git a/Makefile b/Makefile index 7f9ff9b..a9ae5dc 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v0.10.2 From d53b93f2603554c3420e301bd13ee2c354a15ceb Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 04:48:36 +0000 Subject: mlx4_en: Pause parameters per port Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f7324..96e709d 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1..95706ee 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c..98ddc08 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; -- cgit v0.10.2 From 605f196efbf8dcbb3581e76ddd0573899dffcf1f Mon Sep 17 00:00:00 2001 From: Ron Madrid Date: Thu, 6 Nov 2008 09:05:26 +0000 Subject: phy: Add support for Marvell 88E1118 PHY This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid Signed-off-by: David S. Miller diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa5479..eb6411c 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, + { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, .name = "Marvell 88E1145", -- cgit v0.10.2 From 29d7b90c15035741d15421b36000509212b3e135 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:07:15 +0100 Subject: sched: fix kernel warning on /proc/sched_debug access Luis Henriques reported that with CONFIG_PREEMPT=y + CONFIG_PREEMPT_DEBUG=y + CONFIG_SCHED_DEBUG=y + CONFIG_LATENCYTOP=y enabled, the following warning triggers when using latencytop: > [ 775.663239] BUG: using smp_processor_id() in preemptible [00000000] code: latencytop/6585 > [ 775.663303] caller is native_sched_clock+0x3a/0x80 > [ 775.663314] Pid: 6585, comm: latencytop Tainted: G W 2.6.28-rc4-00355-g9c7c354 #1 > [ 775.663322] Call Trace: > [ 775.663343] [] debug_smp_processor_id+0xe4/0xf0 > [ 775.663356] [] native_sched_clock+0x3a/0x80 > [ 775.663368] [] sched_clock+0x9/0x10 > [ 775.663381] [] proc_sched_show_task+0x8bd/0x10e0 > [ 775.663395] [] sched_show+0x3e/0x80 > [ 775.663408] [] seq_read+0xdb/0x350 > [ 775.663421] [] ? security_file_permission+0x16/0x20 > [ 775.663435] [] vfs_read+0xc8/0x170 > [ 775.663447] [] sys_read+0x55/0x90 > [ 775.663460] [] system_call_fastpath+0x16/0x1b > ... This breakage was caused by me via: 7cbaef9: sched: optimize sched_clock() a bit Change the calls to cpu_clock(). Reported-by: Luis Henriques diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 48ecc51..26ed8e3 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -423,10 +423,11 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m) #undef __P { + unsigned int this_cpu = raw_smp_processor_id(); u64 t0, t1; - t0 = sched_clock(); - t1 = sched_clock(); + t0 = cpu_clock(this_cpu); + t1 = cpu_clock(this_cpu); SEQ_printf(m, "%-35s:%21Ld\n", "clock-delta", (long long)(t1-t0)); } -- cgit v0.10.2 From e47411b1f4456480d6c60ebdc7a733e81ccd5d66 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:27:53 +0100 Subject: MAINTAINERS: remove me as RAID maintainer Neil has been the maintainer of the RAID/MD code for a long time, remove me as a co-maintainer. Signed-off-by: Ingo Molnar diff --git a/MAINTAINERS b/MAINTAINERS index 8e0777f..627e4c89 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3928,8 +3928,6 @@ M: bootc@bootc.net S: Maintained SOFTWARE RAID (Multiple Disks) SUPPORT -P: Ingo Molnar -M: mingo@redhat.com P: Neil Brown M: neilb@suse.de L: linux-raid@vger.kernel.org -- cgit v0.10.2 From 5821e1b74f0d08952cb5da4bfd2d9a388d8df58e Mon Sep 17 00:00:00 2001 From: walimis Date: Sat, 15 Nov 2008 15:19:06 +0800 Subject: function tracing: fix wrong pos computing when read buffer has been fulfilled Impact: make output of available_filter_functions complete phenomenon: The first value of dyn_ftrace_total_info is not equal with `cat available_filter_functions | wc -l`, but they should be equal. root cause: When printing functions with seq_printf in t_show, if the read buffer is just overflowed by current function record, then this function won't be printed to user space through read buffer, it will just be dropped. So we can't see this function printing. So, every time the last function to fill the read buffer, if overflowed, will be dropped. This also applies to set_ftrace_filter if set_ftrace_filter has more bytes than read buffer. fix: Through checking return value of seq_printf, if less than 0, we know this function doesn't be printed. Then we decrease position to force this function to be printed next time, in next read buffer. Another little fix is to show correct allocating pages count. Signed-off-by: walimis Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 14fa522..e602057 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -673,7 +673,7 @@ static int __init ftrace_dyn_table_alloc(unsigned long num_to_init) cnt = num_to_init / ENTRIES_PER_PAGE; pr_info("ftrace: allocating %ld entries in %d pages\n", - num_to_init, cnt); + num_to_init, cnt + 1); for (i = 0; i < cnt; i++) { pg->next = (void *)get_zeroed_page(GFP_KERNEL); @@ -753,13 +753,11 @@ static void *t_start(struct seq_file *m, loff_t *pos) void *p = NULL; loff_t l = -1; - if (*pos != iter->pos) { - for (p = t_next(m, p, &l); p && l < *pos; p = t_next(m, p, &l)) - ; - } else { - l = *pos; - p = t_next(m, p, &l); - } + if (*pos > iter->pos) + *pos = iter->pos; + + l = *pos; + p = t_next(m, p, &l); return p; } @@ -770,15 +768,21 @@ static void t_stop(struct seq_file *m, void *p) static int t_show(struct seq_file *m, void *v) { + struct ftrace_iterator *iter = m->private; struct dyn_ftrace *rec = v; char str[KSYM_SYMBOL_LEN]; + int ret = 0; if (!rec) return 0; kallsyms_lookup(rec->ip, NULL, NULL, NULL, str); - seq_printf(m, "%s\n", str); + ret = seq_printf(m, "%s\n", str); + if (ret < 0) { + iter->pos--; + iter->idx--; + } return 0; } @@ -804,7 +808,7 @@ ftrace_avail_open(struct inode *inode, struct file *file) return -ENOMEM; iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; ret = seq_open(file, &show_ftrace_seq_ops); if (!ret) { @@ -891,7 +895,7 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable) if (file->f_mode & FMODE_READ) { iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; iter->flags = enable ? FTRACE_ITER_FILTER : FTRACE_ITER_NOTRACE; -- cgit v0.10.2 From 5f5c4bdb144bf285727867bbd75c13c5a99150c9 Mon Sep 17 00:00:00 2001 From: Joey Zhuo Date: Sun, 16 Nov 2008 00:39:35 -0800 Subject: via-velocity: enable perfect filtering for multicast packets Signed-off-by: Joey Zhuo Acked-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5..11cb3e5 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; -- cgit v0.10.2 From 6ff68026f4757d68461b7fbeca5c944e1f5f8b44 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Wed, 12 Nov 2008 09:52:32 +0000 Subject: e1000e: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c8..62421ce 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b..2c8dffd 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4970,6 +4970,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); -- cgit v0.10.2 From de1264896c8012a261c1cba17e6a61199c276ad3 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:19 +0000 Subject: e1000: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893a..c854c96 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac8215..872799b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", -- cgit v0.10.2 From e1b86d8479f90aadee57a3d07d8e61c815c202d9 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:37 +0000 Subject: igb: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c9..89964fa 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd..0a98015 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1244,6 +1244,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); -- cgit v0.10.2 From 0f807044980dd51fdf9aa2df8d503d4757501b20 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Tue, 11 Nov 2008 07:54:54 +0000 Subject: qla3xxx: Cleanup: Fix link print statements. Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c..508452c 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); -- cgit v0.10.2 From ac450208dea8cf1b9aa8feabd06a7209a282d749 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 06:20:10 +0000 Subject: igb: use dev_printk instead of printk Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 0a98015..1cbae85 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; -- cgit v0.10.2 From 773c9c1f77174429ad2feb1735a3beb33ff3b6c0 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 14 Nov 2008 13:51:54 +0000 Subject: e100: fix dma error in direction for mapping The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae..e8bfcce 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) -- cgit v0.10.2 From 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Thu, 13 Nov 2008 21:53:13 +0000 Subject: phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti Signed-off-by: David S. Miller diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b..8fb1fac 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v0.10.2 From 77fb61a04a0483ad274ce5c51b02c46c12db3693 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Nov 2008 10:09:34 -0800 Subject: acpi: fix oops in acpi_system_wakeup_device_seq_show MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prémont Cc: Kay Sievers Cc: Len Brown Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 64e591b..4dbc227 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,7 +366,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - dev_name(ldev) ? ldev->bus->name : "no-bus", + ldev->bus ? ldev->bus->name : "no-bus", dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); -- cgit v0.10.2 From b1ccbdc4a2af5ffcd6082c3a7a6fbd0e134031f2 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 8 Nov 2008 01:28:19 +0100 Subject: mfd: fix event masking for da9030 Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index b57326a..0b5bd85 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) { uint8_t v[3]; - chip->events_mask &= ~events; + chip->events_mask |= events; v[0] = (chip->events_mask & 0xff); v[1] = (chip->events_mask >> 8) & 0xff; -- cgit v0.10.2 From 898d8054ec0cb5ba0ec1b15c78042a23ed103c02 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 17:34:02 +0100 Subject: mfd: Correct WM8350 I2C return code usage The vendor BSP used for the WM8350 development provided an I2C driver which incorrectly returned zero on succesful sends rather than the number of transmitted bytes, an error which was then propagated into the WM8350 I2C accessors. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 8dfe21b..3e0ce0e 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, ret = i2c_master_send(wm8350->i2c_client, ®, 1); if (ret < 0) return ret; - return i2c_master_recv(wm8350->i2c_client, dest, bytes); + ret = i2c_master_recv(wm8350->i2c_client, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; } static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, @@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, { /* we add 1 byte for device register */ u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + int ret; if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) return -EINVAL; msg[0] = reg; memcpy(&msg[1], src, bytes); - return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; } static int wm8350_i2c_probe(struct i2c_client *i2c, -- cgit v0.10.2 From 5c06fe772da43db63b053addcd2c267f76d0be91 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Nov 2008 22:19:10 +0000 Subject: Fix broken ownership of /proc/sys/ files D'oh... Signed-off-by: Al Viro Reported-and-tested-by: Peter Palfrader Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index 94fcfff..06ed10b 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -31,6 +31,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb, inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */ inode->i_mode = table->mode; + inode->i_uid = inode->i_gid = 0; if (!table->child) { inode->i_mode |= S_IFREG; inode->i_op = &proc_sys_inode_operations; -- cgit v0.10.2 From e14c8bf86350f6c39186a139c5c584a6111b2f01 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 17 Nov 2008 08:22:18 +1030 Subject: stop_machine: fix race with return value (fixes Bug #11989) Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell Tested-by: "Rafael J. Wysocki" Signed-off-by: Linus Torvalds diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 9bc4c00..24e8cea 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -112,7 +112,7 @@ static int chill(void *unused) int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) { struct work_struct *sm_work; - int i; + int i, ret; /* Set up initial state. */ mutex_lock(&lock); @@ -137,8 +137,9 @@ int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) /* This will release the thread on our CPU. */ put_cpu(); flush_workqueue(stop_machine_wq); + ret = active.fnret; mutex_unlock(&lock); - return active.fnret; + return ret; } int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) -- cgit v0.10.2 From 72eb8c6747b49e41fd2b042510f03ac7c13426fc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 17 Nov 2008 00:30:57 +0100 Subject: unitialized return value in mm/mlock.c: __mlock_vma_pages_range() Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds diff --git a/mm/mlock.c b/mm/mlock.c index a6da2ae..1ada366 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -162,7 +162,7 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, unsigned long addr = start; struct page *pages[16]; /* 16 gives a reasonable batch */ int nr_pages = (end - start) / PAGE_SIZE; - int ret; + int ret = 0; int gup_flags = 0; VM_BUG_ON(start & ~PAGE_MASK); -- cgit v0.10.2 From e82f54ba030b429c06b5240cbe7eeaaa03a8db11 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:07 +0000 Subject: e1000e: fix warn_on reload after phy_id error If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2c8dffd..f6ebebb 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5009,6 +5009,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: -- cgit v0.10.2 From eb7c3adb1ca92450870dbb0d347fc986cd5e2af4 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:23 +0000 Subject: e1000e: fix IPMI traffic Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c..c55fd6f 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f6ebebb..91795f7 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d72..e909f96 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, -- cgit v0.10.2 From f1987b44f642e96176adc88b7ce23a1d74806f89 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 15 Nov 2008 11:12:47 -0500 Subject: cifs: reinstate sharing of tree connections Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 59841a6..1d6dfa8 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,12 +107,13 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp, *tmp2, *tmp3; + struct list_head *tmp1, *tmp2, *tmp3; struct mid_q_entry *mid_entry; struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; - int i; + int i, j; + __u32 dev_type; seq_puts(m, "Display Internal CIFS Data Structures for Debugging\n" @@ -123,8 +124,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) i = 0; read_lock(&cifs_tcp_ses_lock); - list_for_each(tmp, &cifs_tcp_ses_list) { - server = list_entry(tmp, struct TCP_Server_Info, + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); i++; list_for_each(tmp2, &server->smb_ses_list) { @@ -133,12 +134,12 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); + seq_printf(m, "\n%d) entry for %s not fully " + "displayed\n\t", i, ses->serverName); } else { seq_printf(m, - "\n%d) Name: %s Domain: %s Mounts: %d OS:" - " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" + "\n%d) Name: %s Domain: %s Uses: %d OS:" + " %s\n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, ses->ses_count, ses->serverOS, ses->serverNOS, @@ -156,14 +157,44 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) atomic_read(&server->num_waiters)); #endif - seq_puts(m, "\nMIDs:\n"); + seq_puts(m, "\n\tShares:"); + j = 0; + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, struct cifsTconInfo, + tcon_list); + ++j; + dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); + seq_printf(m, "\n\t%d) %s Mounts: %d ", j, + tcon->treeName, tcon->tc_count); + if (tcon->nativeFileSystem) { + seq_printf(m, "Type: %s ", + tcon->nativeFileSystem); + } + seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" + "\nPathComponentMax: %d Status: 0x%d", + le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), + le32_to_cpu(tcon->fsAttrInfo.Attributes), + le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), + tcon->tidStatus); + if (dev_type == FILE_DEVICE_DISK) + seq_puts(m, " type: DISK "); + else if (dev_type == FILE_DEVICE_CD_ROM) + seq_puts(m, " type: CDROM "); + else + seq_printf(m, " type: %d ", dev_type); + + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_putc(m, '\n'); + } + + seq_puts(m, "\n\tMIDs:\n"); spin_lock(&GlobalMid_Lock); list_for_each(tmp3, &server->pending_mid_q) { - mid_entry = list_entry(tmp3, struct - mid_q_entry, + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); - seq_printf(m, "State: %d com: %d pid:" + seq_printf(m, "\tState: %d com: %d pid:" " %d tsk: %p mid %d\n", mid_entry->midState, (int)mid_entry->command, @@ -177,41 +208,6 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); - seq_puts(m, "Shares:"); - - i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - __u32 dev_type; - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); - seq_printf(m, "\n%d) %s Uses: %d ", i, - tcon->treeName, atomic_read(&tcon->useCount)); - if (tcon->nativeFileSystem) { - seq_printf(m, "Type: %s ", - tcon->nativeFileSystem); - } - seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" - "\nPathComponentMax: %d Status: %d", - le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), - le32_to_cpu(tcon->fsAttrInfo.Attributes), - le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), - tcon->tidStatus); - if (dev_type == FILE_DEVICE_DISK) - seq_puts(m, " type: DISK "); - else if (dev_type == FILE_DEVICE_CD_ROM) - seq_puts(m, " type: CDROM "); - else - seq_printf(m, " type: %d ", dev_type); - - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - } - read_unlock(&GlobalSMBSeslock); - - seq_putc(m, '\n'); - /* BB add code to dump additional info such as TCP session info now */ return 0; } @@ -235,7 +231,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, { char c; int rc; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; rc = get_user(c, buffer); @@ -243,33 +241,42 @@ static ssize_t cifs_stats_proc_write(struct file *file, return rc; if (c == '1' || c == 'y' || c == 'Y' || c == '0') { - read_lock(&GlobalSMBSeslock); #ifdef CONFIG_CIFS_STATS2 atomic_set(&totBufAllocCount, 0); atomic_set(&totSmBufAllocCount, 0); #endif /* CONFIG_CIFS_STATS2 */ - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, - cifsConnectionList); - atomic_set(&tcon->num_smbs_sent, 0); - atomic_set(&tcon->num_writes, 0); - atomic_set(&tcon->num_reads, 0); - atomic_set(&tcon->num_oplock_brks, 0); - atomic_set(&tcon->num_opens, 0); - atomic_set(&tcon->num_closes, 0); - atomic_set(&tcon->num_deletes, 0); - atomic_set(&tcon->num_mkdirs, 0); - atomic_set(&tcon->num_rmdirs, 0); - atomic_set(&tcon->num_renames, 0); - atomic_set(&tcon->num_t2renames, 0); - atomic_set(&tcon->num_ffirst, 0); - atomic_set(&tcon->num_fnext, 0); - atomic_set(&tcon->num_fclose, 0); - atomic_set(&tcon->num_hardlinks, 0); - atomic_set(&tcon->num_symlinks, 0); - atomic_set(&tcon->num_locks, 0); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_session_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_session_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + atomic_set(&tcon->num_smbs_sent, 0); + atomic_set(&tcon->num_writes, 0); + atomic_set(&tcon->num_reads, 0); + atomic_set(&tcon->num_oplock_brks, 0); + atomic_set(&tcon->num_opens, 0); + atomic_set(&tcon->num_closes, 0); + atomic_set(&tcon->num_deletes, 0); + atomic_set(&tcon->num_mkdirs, 0); + atomic_set(&tcon->num_rmdirs, 0); + atomic_set(&tcon->num_renames, 0); + atomic_set(&tcon->num_t2renames, 0); + atomic_set(&tcon->num_ffirst, 0); + atomic_set(&tcon->num_fnext, 0); + atomic_set(&tcon->num_fclose, 0); + atomic_set(&tcon->num_hardlinks, 0); + atomic_set(&tcon->num_symlinks, 0); + atomic_set(&tcon->num_locks, 0); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } return count; @@ -278,7 +285,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, static int cifs_stats_proc_show(struct seq_file *m, void *v) { int i; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; seq_printf(m, @@ -307,44 +316,55 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) GlobalCurrentXid, GlobalMaxActiveXid); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", - atomic_read(&tcon->num_smbs_sent), - atomic_read(&tcon->num_oplock_brks)); - seq_printf(m, "\nReads: %d Bytes: %lld", - atomic_read(&tcon->num_reads), - (long long)(tcon->bytes_read)); - seq_printf(m, "\nWrites: %d Bytes: %lld", - atomic_read(&tcon->num_writes), - (long long)(tcon->bytes_written)); - seq_printf(m, - "\nLocks: %d HardLinks: %d Symlinks: %d", - atomic_read(&tcon->num_locks), - atomic_read(&tcon->num_hardlinks), - atomic_read(&tcon->num_symlinks)); - - seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d", - atomic_read(&tcon->num_opens), - atomic_read(&tcon->num_closes), - atomic_read(&tcon->num_deletes)); - seq_printf(m, "\nMkdirs: %d Rmdirs: %d", - atomic_read(&tcon->num_mkdirs), - atomic_read(&tcon->num_rmdirs)); - seq_printf(m, "\nRenames: %d T2 Renames %d", - atomic_read(&tcon->num_renames), - atomic_read(&tcon->num_t2renames)); - seq_printf(m, "\nFindFirst: %d FNext %d FClose %d", - atomic_read(&tcon->num_ffirst), - atomic_read(&tcon->num_fnext), - atomic_read(&tcon->num_fclose)); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + i++; + seq_printf(m, "\n%d) %s", i, tcon->treeName); + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", + atomic_read(&tcon->num_smbs_sent), + atomic_read(&tcon->num_oplock_brks)); + seq_printf(m, "\nReads: %d Bytes: %lld", + atomic_read(&tcon->num_reads), + (long long)(tcon->bytes_read)); + seq_printf(m, "\nWrites: %d Bytes: %lld", + atomic_read(&tcon->num_writes), + (long long)(tcon->bytes_written)); + seq_printf(m, "\nLocks: %d HardLinks: %d " + "Symlinks: %d", + atomic_read(&tcon->num_locks), + atomic_read(&tcon->num_hardlinks), + atomic_read(&tcon->num_symlinks)); + seq_printf(m, "\nOpens: %d Closes: %d" + "Deletes: %d", + atomic_read(&tcon->num_opens), + atomic_read(&tcon->num_closes), + atomic_read(&tcon->num_deletes)); + seq_printf(m, "\nMkdirs: %d Rmdirs: %d", + atomic_read(&tcon->num_mkdirs), + atomic_read(&tcon->num_rmdirs)); + seq_printf(m, "\nRenames: %d T2 Renames %d", + atomic_read(&tcon->num_renames), + atomic_read(&tcon->num_t2renames)); + seq_printf(m, "\nFindFirst: %d FNext %d " + "FClose %d", + atomic_read(&tcon->num_ffirst), + atomic_read(&tcon->num_fnext), + atomic_read(&tcon->num_fclose)); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); return 0; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index a1e9662..d9cf467 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -514,10 +514,11 @@ static void cifs_umount_begin(struct super_block *sb) tcon = cifs_sb->tcon; if (tcon == NULL) return; - down(&tcon->tconSem); - if (atomic_read(&tcon->useCount) == 1) + + read_lock(&cifs_tcp_ses_lock); + if (tcon->tc_count == 1) tcon->tidStatus = CifsExiting; - up(&tcon->tconSem); + read_unlock(&cifs_tcp_ses_lock); /* cancel_brl_requests(tcon); */ /* BB mark all brl mids as exiting */ /* cancel_notify_requests(tcon); */ @@ -1060,7 +1061,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 631a99f..f1ae1f5 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -233,16 +233,15 @@ struct cifsSesInfo { * session */ struct cifsTconInfo { - struct list_head cifsConnectionList; + struct list_head tcon_list; + int tc_count; struct list_head openFileList; - struct semaphore tconSem; struct cifsSesInfo *ses; /* pointer to session associated with */ char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource in ASCII */ char *nativeFileSystem; __u16 tid; /* The 2 byte tree id */ __u16 Flags; /* optional support bits */ enum statusEnum tidStatus; - atomic_t useCount; /* how many explicit/implicit mounts to share */ #ifdef CONFIG_CIFS_STATS atomic_t num_smbs_sent; atomic_t num_writes; @@ -600,9 +599,13 @@ require use of the stronger protocol */ */ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; -/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +/* + * This lock protects the cifs_tcp_ses_list, the list of smb sessions per + * tcp session, and the list of tcon's per smb session. It also protects + * the reference counters for the server, smb session, and tcon. Finally, + * changes to the tcon->tidStatus should be done while holding this lock. + */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9c95617..e6bb2d9 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -742,50 +742,31 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) int rc = 0; cFYI(1, ("In tree disconnect")); - /* - * If last user of the connection and - * connection alive - disconnect it - * If this is the last connection on the server session disconnect it - * (and inside session disconnect we should check if tcp socket needs - * to be freed and kernel thread woken up). - */ - if (tcon) - down(&tcon->tconSem); - else - return -EIO; - atomic_dec(&tcon->useCount); - if (atomic_read(&tcon->useCount) > 0) { - up(&tcon->tconSem); - return -EBUSY; - } + /* BB: do we need to check this? These should never be NULL. */ + if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) + return -EIO; - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ - if (tcon->need_reconnect) { - up(&tcon->tconSem); + /* + * No need to return error on this operation if tid invalidated and + * closed on server already e.g. due to tcp session crashing. Also, + * the tcon is no longer on the list, so no need to take lock before + * checking this. + */ + if (tcon->need_reconnect) return 0; - } - if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) { - up(&tcon->tconSem); - return -EIO; - } rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon, (void **)&smb_buffer); - if (rc) { - up(&tcon->tconSem); + if (rc) return rc; - } rc = SendReceiveNoRsp(xid, tcon->ses, smb_buffer, 0); if (rc) cFYI(1, ("Tree disconnect failed %d", rc)); - up(&tcon->tconSem); - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ + closed on server already e.g. due to tcp session crashing */ if (rc == -EAGAIN) rc = 0; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a3dc0d7..2f2be8f 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -124,7 +124,7 @@ static int cifs_reconnect(struct TCP_Server_Info *server) { int rc = 0; - struct list_head *tmp; + struct list_head *tmp, *tmp2; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; struct mid_q_entry *mid_entry; @@ -149,13 +149,12 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); ses->need_reconnect = true; ses->ipc_tid = 0; - } - read_unlock(&cifs_tcp_ses_lock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->ses) && (tcon->ses->server == server)) + list_for_each(tmp2, &ses->tcon_list) { + tcon = list_entry(tmp2, struct cifsTconInfo, tcon_list); tcon->need_reconnect = true; + } } + read_unlock(&cifs_tcp_ses_lock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -1462,6 +1461,52 @@ cifs_put_smb_ses(struct cifsSesInfo *ses) cifs_put_tcp_session(server); } +static struct cifsTconInfo * +cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) +{ + struct list_head *tmp; + struct cifsTconInfo *tcon; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &ses->tcon_list) { + tcon = list_entry(tmp, struct cifsTconInfo, tcon_list); + if (tcon->tidStatus == CifsExiting) + continue; + if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE)) + continue; + + ++tcon->tc_count; + write_unlock(&cifs_tcp_ses_lock); + return tcon; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_tcon(struct cifsTconInfo *tcon) +{ + int xid; + struct cifsSesInfo *ses = tcon->ses; + + write_lock(&cifs_tcp_ses_lock); + if (--tcon->tc_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&tcon->tcon_list); + write_unlock(&cifs_tcp_ses_lock); + + xid = GetXid(); + CIFSSMBTDis(xid, tcon); + _FreeXid(xid); + + DeleteTconOplockQEntries(tcon); + tconInfoFree(tcon); + cifs_put_smb_ses(ses); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -2220,11 +2265,11 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); + tcon = cifs_find_tcon(pSesInfo, volume_info.UNC); if (tcon) { cFYI(1, ("Found match on UNC path")); - if (tcon->seal != volume_info.seal) - cERROR(1, ("transport encryption setting " - "conflicts with existing tid")); + /* existing tcon already has a reference */ + cifs_put_smb_ses(pSesInfo); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { @@ -2257,6 +2302,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; + tcon->ses = pSesInfo; + write_lock(&cifs_tcp_ses_lock); + list_add(&tcon->tcon_list, &pSesInfo->tcon_list); + write_unlock(&cifs_tcp_ses_lock); } /* we can have only one retry value for a connection @@ -2283,18 +2332,14 @@ mount_fail_check: /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) - tconInfoFree(tcon); - - /* should also end up putting our tcp session ref if needed */ - if (pSesInfo) + cifs_put_tcon(tcon); + else if (pSesInfo) cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); goto out; } - atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; /* do not care if following two calls succeed - informational */ if (!tcon->ipc) { @@ -3565,23 +3610,10 @@ int cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) { int rc = 0; - int xid; - struct cifsSesInfo *ses = NULL; char *tmp; - xid = GetXid(); - - if (cifs_sb->tcon) { - ses = cifs_sb->tcon->ses; /* save ptr to ses before delete tcon!*/ - rc = CIFSSMBTDis(xid, cifs_sb->tcon); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - DeleteTconOplockQEntries(cifs_sb->tcon); - tconInfoFree(cifs_sb->tcon); - cifs_put_smb_ses(ses); - } + if (cifs_sb->tcon) + cifs_put_tcon(cifs_sb->tcon); cifs_sb->tcon = NULL; tmp = cifs_sb->prepath; @@ -3589,7 +3621,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepath = NULL; kfree(tmp); - FreeXid(xid); return rc; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 46c8c7b..addd1dc 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -79,6 +79,7 @@ sesInfoAlloc(void) ret_buf->status = CifsNew; ++ret_buf->ses_count; INIT_LIST_HEAD(&ret_buf->smb_ses_list); + INIT_LIST_HEAD(&ret_buf->tcon_list); init_MUTEX(&ret_buf->sesSem); } return ret_buf; @@ -107,17 +108,14 @@ tconInfoAlloc(void) struct cifsTconInfo *ret_buf; ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&tconInfoAllocCount); - list_add(&ret_buf->cifsConnectionList, - &GlobalTreeConnectionList); ret_buf->tidStatus = CifsNew; + ++ret_buf->tc_count; INIT_LIST_HEAD(&ret_buf->openFileList); - init_MUTEX(&ret_buf->tconSem); + INIT_LIST_HEAD(&ret_buf->tcon_list); #ifdef CONFIG_CIFS_STATS spin_lock_init(&ret_buf->stat_lock); #endif - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -129,10 +127,7 @@ tconInfoFree(struct cifsTconInfo *buf_to_free) cFYI(1, ("Null buffer passed to tconInfoFree")); return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&tconInfoAllocCount); - list_del(&buf_to_free->cifsConnectionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->nativeFileSystem); kfree(buf_to_free); } @@ -493,9 +488,10 @@ bool is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) { struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf; - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp1, *tmp2; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; + struct cifsInodeInfo *pCifsInode; struct cifsFileInfo *netfile; cFYI(1, ("Checking for oplock break or dnotify response")); @@ -550,42 +546,42 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) return false; /* look up tcon based on tid & uid */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &srv->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + list_for_each(tmp1, &ses->tcon_list) { + tcon = list_entry(tmp1, struct cifsTconInfo, tcon_list); + if (tcon->tid != buf->Tid) + continue; + cifs_stats_inc(&tcon->num_oplock_brks); - list_for_each(tmp1, &tcon->openFileList) { - netfile = list_entry(tmp1, struct cifsFileInfo, + list_for_each(tmp2, &tcon->openFileList) { + netfile = list_entry(tmp2, struct cifsFileInfo, tlist); - if (pSMB->Fid == netfile->netfid) { - struct cifsInodeInfo *pCifsInode; - read_unlock(&GlobalSMBSeslock); - cFYI(1, - ("file id match, oplock break")); - pCifsInode = - CIFS_I(netfile->pInode); - pCifsInode->clientCanCacheAll = false; - if (pSMB->OplockLevel == 0) - pCifsInode->clientCanCacheRead - = false; - pCifsInode->oplockPending = true; - AllocOplockQEntry(netfile->pInode, - netfile->netfid, - tcon); - cFYI(1, - ("about to wake up oplock thread")); - if (oplockThread) - wake_up_process(oplockThread); - return true; - } + if (pSMB->Fid != netfile->netfid) + continue; + + read_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("file id match, oplock break")); + pCifsInode = CIFS_I(netfile->pInode); + pCifsInode->clientCanCacheAll = false; + if (pSMB->OplockLevel == 0) + pCifsInode->clientCanCacheRead = false; + pCifsInode->oplockPending = true; + AllocOplockQEntry(netfile->pInode, + netfile->netfid, tcon); + cFYI(1, ("about to wake up oplock thread")); + if (oplockThread) + wake_up_process(oplockThread); + + return true; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("No matching file for oplock break")); return true; } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("Can not process oplock break for non-existent connection")); return true; } -- cgit v0.10.2 From ebfe92ca65c780334bdf847ddc4eca15835bd9c0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Sun, 16 Nov 2008 19:48:49 -0800 Subject: Phonet: refuse to send bigger than MTU packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index defeb7a..7ab30f6 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -144,8 +144,8 @@ static int pn_send(struct sk_buff *skb, struct net_device *dev, struct phonethdr *ph; int err; - if (skb->len + 2 > 0xffff) { - /* Phonet length field would overflow */ + if (skb->len + 2 > 0xffff /* Phonet length field limit */ || + skb->len + sizeof(struct phonethdr) > dev->mtu) { err = -EMSGSIZE; goto drop; } -- cgit v0.10.2 From c2b3382cd4d6c6adef1347e81f20e16c93a39feb Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 03:57:13 +0000 Subject: [CIFS] Fix build break Signed-off-by: Steve French diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 1d6dfa8..490e34b 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -249,9 +249,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, list_for_each(tmp1, &cifs_tcp_ses_list) { server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); - list_for_each(tmp2, &server->smb_session_list) { + list_for_each(tmp2, &server->smb_ses_list) { ses = list_entry(tmp2, struct cifsSesInfo, - smb_session_list); + smb_ses_list); list_for_each(tmp3, &ses->tcon_list) { tcon = list_entry(tmp3, struct cifsTconInfo, -- cgit v0.10.2 From 584c650b4e6fa16f9ab45d382f86ad6d9c625227 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 16 Nov 2008 23:03:45 -0800 Subject: isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0..1bfc55d 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); -- cgit v0.10.2 From 5f9021cfdc3524a4c5e3d7ae2d049eb7adcd6776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 16 Nov 2008 23:20:31 -0800 Subject: rtnetlink: propagate error from dev_change_flags in do_setlink() Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy Tested-by: Johannes Berg Signed-off-by: Johannes Berg Signed-off-by: David S. Miller diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 31f29d2..4dfb6b4 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -878,7 +878,9 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, if (ifm->ifi_change) flags = (flags & ifm->ifi_change) | (dev->flags & ~ifm->ifi_change); - dev_change_flags(dev, flags); + err = dev_change_flags(dev, flags); + if (err < 0) + goto errout; } if (tb[IFLA_TXQLEN]) -- cgit v0.10.2 From 1e74f3000b86969de421ca0da08f42e7d21cbd99 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 17 Nov 2008 16:24:34 +0900 Subject: swiotlb: use coherent_dma_mask in alloc_coherent Impact: fix DMA buffer allocation coherency bug in certain configs This patch fixes swiotlb to use dev->coherent_dma_mask in swiotlb_alloc_coherent(). coherent_dma_mask is a subset of dma_mask (equal to it most of the time), enumerating the address range that a given device is able to DMA to/from in a cache-coherent way. But currently, swiotlb uses dev->dma_mask in alloc_coherent() implicitly via address_needs_mapping(), but alloc_coherent is really supposed to use coherent_dma_mask. This bug could break drivers that uses smaller coherent_dma_mask than dma_mask (though the current code works for the majority that use the same mask for coherent_dma_mask and dma_mask). Signed-off-by: FUJITA Tomonori Cc: tony.luck@intel.com Signed-off-by: Ingo Molnar diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 78330c3..5f6c629 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -467,9 +467,13 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t dev_addr; void *ret; int order = get_order(size); + u64 dma_mask = DMA_32BIT_MASK; + + if (hwdev && hwdev->coherent_dma_mask) + dma_mask = hwdev->coherent_dma_mask; ret = (void *)__get_free_pages(flags, order); - if (ret && address_needs_mapping(hwdev, virt_to_bus(ret), size)) { + if (ret && !is_buffer_dma_capable(dma_mask, virt_to_bus(ret), size)) { /* * The allocated memory isn't reachable by the device. * Fall back on swiotlb_map_single(). @@ -493,9 +497,9 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dev_addr = virt_to_bus(ret); /* Confirm address can be DMA'd by device */ - if (address_needs_mapping(hwdev, dev_addr, size)) { + if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) { printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n", - (unsigned long long)*hwdev->dma_mask, + (unsigned long long)dma_mask, (unsigned long long)dev_addr); /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ -- cgit v0.10.2 From ad133ba3dc283300e5b62b5b7211d2f39fbf6ee7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 17 Nov 2008 15:39:47 +0100 Subject: sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers Impact: fix potential NULL dereference Contrary to ad474caca3e2a0550b7ce0706527ad5ab389a4d4 changelog, other acct_group_xxx() helpers can be called after exit_notify() by timer tick. Thanks to Roland for pointing out this. Somehow I missed this simple fact when I read the original patch, and I am afraid I confused Frank during the discussion. Sorry. Fortunately, these helpers work with current, we can check ->exit_state to ensure that ->signal can't go away under us. Also, add the comment and compiler barrier to account_group_exec_runtime(), to make sure we load ->signal only once. Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 153dcb2..895337b 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1308,9 +1308,10 @@ static inline int task_cputime_expired(const struct task_cputime *sample, */ static inline int fastpath_timer_check(struct task_struct *tsk) { - struct signal_struct *sig = tsk->signal; + struct signal_struct *sig; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal/sighand */ + if (unlikely(tsk->exit_state)) return 0; if (!task_cputime_zero(&tsk->cputime_expires)) { @@ -1323,6 +1324,8 @@ static inline int fastpath_timer_check(struct task_struct *tsk) if (task_cputime_expired(&task_sample, &tsk->cputime_expires)) return 1; } + + sig = tsk->signal; if (!task_cputime_zero(&sig->cputime_expires)) { struct task_cputime group_sample; diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index ee71bec..7dbf72a 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -298,9 +298,11 @@ static inline void account_group_user_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -325,9 +327,11 @@ static inline void account_group_system_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -353,8 +357,11 @@ static inline void account_group_exec_runtime(struct task_struct *tsk, struct signal_struct *sig; sig = tsk->signal; + /* see __exit_signal()->task_rq_unlock_wait() */ + barrier(); if (unlikely(!sig)) return; + if (sig->cputime.totals) { struct task_cputime *times; -- cgit v0.10.2 From ab3f992983062440b4f37c666dac66d987902d91 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 16:03:00 +0000 Subject: [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2f2be8f..c7d3417 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2270,16 +2270,18 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Found match on UNC path")); /* existing tcon already has a reference */ cifs_put_smb_ses(pSesInfo); + if (tcon->seal != volume_info.seal) + cERROR(1, ("transport encryption setting " + "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { rc = -ENOMEM; goto mount_fail_check; } + tcon->ses = pSesInfo; /* check for null share name ie connect to dfs root */ - - /* BB check if works for exactly length 3 strings */ if ((strchr(volume_info.UNC + 3, '\\') == NULL) && (strchr(volume_info.UNC + 3, '/') == NULL)) { /* rc = connect_to_dfs_path(...) */ @@ -2302,7 +2304,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; - tcon->ses = pSesInfo; write_lock(&cifs_tcp_ses_lock); list_add(&tcon->tcon_list, &pSesInfo->tcon_list); write_unlock(&cifs_tcp_ses_lock); -- cgit v0.10.2 From 65ecc14a30ad21bed9aabdfd6a2ae1a1aaaa6a00 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 15 Nov 2008 12:02:34 -0600 Subject: Remove -mno-spe flags as they dont belong For some unknown reason at Steven Rostedt added in disabling of the SPE instruction generation for e500 based PPC cores in commit 6ec562328fda585be2d7f472cfac99d3b44d362a. We are removing it because: 1. It generates e500 kernels that don't work 2. its not the correct set of flags to do this 3. we handle this in the arch/powerpc/Makefile already 4. its unknown in talking to Steven why he did this Signed-off-by: Kumar Gala Tested-and-Acked-by: Steven Rostedt Signed-off-by: Linus Torvalds diff --git a/kernel/Makefile b/kernel/Makefile index 9a3ec66..19fad00 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,8 +11,6 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o -CFLAGS_REMOVE_sched.o = -mno-spe - ifdef CONFIG_FUNCTION_TRACER # Do not trace debug files and internal ftrace files CFLAGS_REMOVE_lockdep.o = -pg @@ -21,7 +19,7 @@ CFLAGS_REMOVE_mutex-debug.o = -pg CFLAGS_REMOVE_rtmutex-debug.o = -pg CFLAGS_REMOVE_cgroup-debug.o = -pg CFLAGS_REMOVE_sched_clock.o = -pg -CFLAGS_REMOVE_sched.o = -mno-spe -pg +CFLAGS_REMOVE_sched.o = -pg endif obj-$(CONFIG_FREEZER) += freezer.o -- cgit v0.10.2 From 2c55608f28444c3f33b10312881384c470ceed56 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Thu, 23 Oct 2008 13:58:42 +0400 Subject: Fixed parsing of mount options when doing DFS submount Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton Signed-off-by: Igor Mammedov Signed-off-by: Steve French diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d2c8eef..e1c1836 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -106,7 +106,8 @@ static char *cifs_get_share_name(const char *node_name) /** * compose_mount_options - creates mount options for refferral * @sb_mountdata: parent/root DFS mount options (template) - * @ref_unc: refferral server UNC + * @dentry: point where we are going to mount + * @ref: server's referral * @devname: pointer for saving device name * * creates mount options for submount based on template options sb_mountdata @@ -116,7 +117,8 @@ static char *cifs_get_share_name(const char *node_name) * Caller is responcible for freeing retunrned value if it is not error. */ static char *compose_mount_options(const char *sb_mountdata, - const char *ref_unc, + struct dentry *dentry, + const struct dfs_info3_param *ref, char **devname) { int rc; @@ -126,11 +128,12 @@ static char *compose_mount_options(const char *sb_mountdata, char *srvIP = NULL; char sep = ','; int off, noff; + char *fullpath; if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref_unc); + *devname = cifs_get_share_name(ref->node_name); rc = dns_resolve_server_name_to_ip(*devname, &srvIP); if (rc != 0) { cERROR(1, ("%s: Failed to resolve server part of %s to IP", @@ -138,7 +141,12 @@ static char *compose_mount_options(const char *sb_mountdata, mountdata = ERR_PTR(rc); goto compose_mount_options_out; } - md_len = strlen(sb_mountdata) + strlen(srvIP) + strlen(ref_unc) + 3; + /* md_len = strlen(...) + 12 for 'sep+prefixpath=' + * assuming that we have 'unc=' and 'ip=' in + * the original sb_mountdata + */ + md_len = strlen(sb_mountdata) + strlen(srvIP) + + strlen(ref->node_name) + 12; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { mountdata = ERR_PTR(-ENOMEM); @@ -152,41 +160,56 @@ static char *compose_mount_options(const char *sb_mountdata, strncpy(mountdata, sb_mountdata, 5); off += 5; } - while ((tkn_e = strchr(sb_mountdata+off, sep))) { - noff = (tkn_e - (sb_mountdata+off)) + 1; - if (strnicmp(sb_mountdata+off, "unc=", 4) == 0) { + + do { + tkn_e = strchr(sb_mountdata + off, sep); + if (tkn_e == NULL) + noff = strlen(sb_mountdata + off); + else + noff = tkn_e - (sb_mountdata + off) + 1; + + if (strnicmp(sb_mountdata + off, "unc=", 4) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "ip=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "ip=", 3) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "prefixpath=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "prefixpath=", 11) == 0) { off += noff; continue; } - strncat(mountdata, sb_mountdata+off, noff); + strncat(mountdata, sb_mountdata + off, noff); off += noff; - } - strcat(mountdata, sb_mountdata+off); + } while (tkn_e); + strcat(mountdata, sb_mountdata + off); mountdata[md_len] = '\0'; /* copy new IP and ref share name */ - strcat(mountdata, ",ip="); + if (mountdata[strlen(mountdata) - 1] != sep) + strncat(mountdata, &sep, 1); + strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strcat(mountdata, ",unc="); + strncat(mountdata, &sep, 1); + strcat(mountdata, "unc="); strcat(mountdata, *devname); /* find & copy prefixpath */ - tkn_e = strchr(ref_unc+2, '\\'); - if (tkn_e) { - tkn_e = strchr(tkn_e+1, '\\'); - if (tkn_e) { - strcat(mountdata, ",prefixpath="); - strcat(mountdata, tkn_e+1); - } + tkn_e = strchr(ref->node_name + 2, '\\'); + if (tkn_e == NULL) /* invalid unc, missing share name*/ + goto compose_mount_options_out; + + fullpath = build_path_from_dentry(dentry); + tkn_e = strchr(tkn_e + 1, '\\'); + if (tkn_e || strlen(fullpath) - (ref->path_consumed)) { + strncat(mountdata, &sep, 1); + strcat(mountdata, "prefixpath="); + if (tkn_e) + strcat(mountdata, tkn_e + 1); + strcat(mountdata, fullpath + (ref->path_consumed)); } + kfree(fullpath); /*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/ /*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/ @@ -198,7 +221,7 @@ compose_mount_options_out: static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, - struct dentry *dentry, char *ref_unc) + struct dentry *dentry, const struct dfs_info3_param *ref) { struct cifs_sb_info *cifs_sb; struct vfsmount *mnt; @@ -207,7 +230,7 @@ static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, cifs_sb = CIFS_SB(dentry->d_inode->i_sb); mountdata = compose_mount_options(cifs_sb->mountdata, - ref_unc, &devname); + dentry, ref, &devname); if (IS_ERR(mountdata)) return (struct vfsmount *)mountdata; @@ -310,7 +333,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) } mnt = cifs_dfs_do_refmount(nd->path.mnt, nd->path.dentry, - referrals[i].node_name); + referrals + i); cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__, referrals[i].node_name, mnt)); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index e6bb2d9..bdda46d 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3899,6 +3899,27 @@ GetInodeNumOut: return rc; } +/* computes length of UCS string converted to host codepage + * @src: UCS string + * @maxlen: length of the input string in UCS characters + * (not in bytes) + * + * return: size of input string in host codepage + */ +static int hostlen_fromUCS(const __le16 *src, const int maxlen, + const struct nls_table *nls_codepage) { + int i; + int hostlen = 0; + char to[4]; + int charlen; + for (i = 0; (i < maxlen) && src[i]; ++i) { + charlen = nls_codepage->uni2char(le16_to_cpu(src[i]), + to, NLS_MAX_CHARSET_SIZE); + hostlen += charlen > 0 ? charlen : 1; + } + return hostlen; +} + /* parses DFS refferal V3 structure * caller is responsible for freeing target_nodes * returns: @@ -3909,7 +3930,8 @@ static int parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, unsigned int *num_of_nodes, struct dfs_info3_param **target_nodes, - const struct nls_table *nls_codepage) + const struct nls_table *nls_codepage, int remap, + const char *searchName) { int i, rc = 0; char *data_end; @@ -3960,7 +3982,17 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, struct dfs_info3_param *node = (*target_nodes)+i; node->flags = le16_to_cpu(pSMBr->DFSFlags); - node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + if (is_unicode) { + __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL); + cifsConvertToUCS((__le16 *) tmp, searchName, + PATH_MAX, nls_codepage, remap); + node->path_consumed = hostlen_fromUCS(tmp, + le16_to_cpu(pSMBr->PathConsumed)/2, + nls_codepage); + kfree(tmp); + } else + node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + node->server_type = le16_to_cpu(ref->ServerType); node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags); @@ -4093,7 +4125,8 @@ getDFSRetry: /* parse returned result into more usable form */ rc = parse_DFS_referrals(pSMBr, num_of_nodes, - target_nodes, nls_codepage); + target_nodes, nls_codepage, remap, + searchName); GetDFSRefExit: cifs_buf_release(pSMB); -- cgit v0.10.2 From b066a48c9532243894f93a06ca5a0ee2cc21a8dc Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 18 Nov 2008 03:49:05 +0000 Subject: prevent cifs_writepages() from skipping unwritten pages Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp Acked-by: Jeff Layton Cc: Shirish S Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 1540ada..6449e1a 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1404,7 +1404,10 @@ retry: if ((wbc->nr_to_write -= n_iov) <= 0) done = 1; index = next; - } + } else + /* Need to re-find the pages we skipped */ + index = pvec.pages[0]->index + 1; + pagevec_release(&pvec); } if (!scanned && !done) { -- cgit v0.10.2 From 700018e0a77b4113172257fcdaa1c58e27a5074f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 18 Nov 2008 14:02:03 +0800 Subject: cpuset: fix regression when failed to generate sched domains Impact: properly rebuild sched-domains on kmalloc() failure When cpuset failed to generate sched domains due to kmalloc() failure, the scheduler should fallback to the single partition 'fallback_doms' and rebuild sched domains, but now it only destroys but not rebuilds sched domains. The regression was introduced by: | commit dfb512ec4834116124da61d6c1ee10fd0aa32bd6 | Author: Max Krasnyansky | Date: Fri Aug 29 13:11:41 2008 -0700 | | sched: arch_reinit_sched_domains() must destroy domains to force rebuild After the above commit, partition_sched_domains(0, NULL, NULL) will only destroy sched domains and partition_sched_domains(1, NULL, NULL) will create the default sched domain. Signed-off-by: Li Zefan Cc: Max Krasnyansky Cc: Signed-off-by: Ingo Molnar diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 3e00526..81fc679 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -587,7 +587,6 @@ static int generate_sched_domains(cpumask_t **domains, int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - ndoms = 0; doms = NULL; dattr = NULL; csa = NULL; @@ -674,10 +673,8 @@ restart: * Convert to and populate cpu masks. */ doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL); - if (!doms) { - ndoms = 0; + if (!doms) goto done; - } /* * The rest of the code, including the scheduler, can deal with @@ -732,6 +729,13 @@ restart: done: kfree(csa); + /* + * Fallback to the default domain if kmalloc() failed. + * See comments in partition_sched_domains(). + */ + if (doms == NULL) + ndoms = 1; + *domains = doms; *attributes = dattr; return ndoms; diff --git a/kernel/sched.c b/kernel/sched.c index c94baf2..9b1e793 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7789,13 +7789,14 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur, * * The passed in 'doms_new' should be kmalloc'd. This routine takes * ownership of it and will kfree it when done with it. If the caller - * failed the kmalloc call, then it can pass in doms_new == NULL, - * and partition_sched_domains() will fallback to the single partition - * 'fallback_doms', it also forces the domains to be rebuilt. + * failed the kmalloc call, then it can pass in doms_new == NULL && + * ndoms_new == 1, and partition_sched_domains() will fallback to + * the single partition 'fallback_doms', it also forces the domains + * to be rebuilt. * - * If doms_new==NULL it will be replaced with cpu_online_map. - * ndoms_new==0 is a special case for destroying existing domains. - * It will not create the default domain. + * If doms_new == NULL it will be replaced with cpu_online_map. + * ndoms_new == 0 is a special case for destroying existing domains, + * and it will not create the default domain. * * Call with hotplug lock held */ -- cgit v0.10.2 From e270219f4372b58bd3eeac12bd9f7edc592b8f6b Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Tue, 18 Nov 2008 10:15:24 +0600 Subject: kernel/profile.c: fix section mismatch warning Impact: fix section mismatch warning in kernel/profile.c Here, profile_nop function has been called from a non-init function create_hash_tables(void). Which generetes a section mismatch warning. Previously, create_hash_tables(void) was a init function. So, removing __init from create_hash_tables(void) requires profile_nop to be non-init. This patch makes profile_nop function inline and fixes the following warning: WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from the function create_hash_tables() to the function .init.text:profile_nop() The function create_hash_tables() references the function __init profile_nop(). This is often because create_hash_tables lacks a __init annotation or the annotation of profile_nop is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar diff --git a/kernel/profile.c b/kernel/profile.c index 9830a03..5b7d1ac 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -544,7 +544,7 @@ static const struct file_operations proc_profile_operations = { }; #ifdef CONFIG_SMP -static void __init profile_nop(void *unused) +static inline void profile_nop(void *unused) { } -- cgit v0.10.2 From 41c3b648bd4cdc34fd1918e288f8afe78903432e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:45:15 +0100 Subject: ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx() Fixed the GPIO mask and co initialization in patch_stac92hd71bxx() so that the gpio_maks for HP_M4 model is set properly. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0df6f97..b254e90 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4478,6 +4478,13 @@ again: stac92xx_set_config_regs(codec); } + if (spec->board_config > STAC_92HD71BXX_REF) { + /* GPIO0 = EAPD */ + spec->gpio_mask = 0x01; + spec->gpio_dir = 0x01; + spec->gpio_data = 0x01; + } + switch (codec->vendor_id) { case 0x111d76b6: /* 4 Port without Analog Mixer */ case 0x111d76b7: @@ -4537,13 +4544,6 @@ again: spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; - if (spec->board_config > STAC_92HD71BXX_REF) { - /* GPIO0 = EAPD */ - spec->gpio_mask = 0x01; - spec->gpio_dir = 0x01; - spec->gpio_data = 0x01; - } - spec->powerdown_adcs = 1; spec->digbeep_nid = 0x26; spec->mux_nids = stac92hd71bxx_mux_nids; -- cgit v0.10.2 From 4213cb64004e38b3e78424f30e1e638f8004c7a8 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash Signed-off-by: Graf Yang Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index c13fa8d..bde6dc4 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -277,7 +277,7 @@ ENTRY(_bfin_return_from_exception) p5.h = hi(ILAT); r6 = [p5]; r7 = 0x20; /* Did I just cause anther HW error? */ - r7 = r7 & r1; + r6 = r7 & r6; CC = R7 == R6; if CC JUMP _double_fault; #endif -- cgit v0.10.2 From 62273eeb6ac516ab0abf49417378726ad8875b03 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix a broken define in dma-mapping dma_mapping_error is an actual function, so fix broken define with a real inline stub Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index ede748d..d7d9148 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -15,7 +15,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_mapping_error +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} /* * Map a single buffer of the indicated size for DMA in streaming mode. -- cgit v0.10.2 From 80bf272468a8b63f5550304363e55c1ba06c13db Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:48:41 +0100 Subject: ALSA: hda - Add quirks for HP Pavilion DV models Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4. Reference: Novell bnc#445321, bnc#445161 https://bugzilla.novell.com/show_bug.cgi?id=445321 https://bugzilla.novell.com/show_bug.cgi?id=445161 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b254e90..25d4bf8 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1688,6 +1688,10 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2, + "HP dv5", STAC_HP_M4), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, + "HP dv7", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a, "unknown HP", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, -- cgit v0.10.2 From c5d08bb567874e410210cf7d21a25f28fcceb0a7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:55:36 +0100 Subject: ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT Use cached write for setting the GPIO unsolicited event mask to be restored properly at resume. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 25d4bf8..9563b5b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4502,7 +4502,7 @@ again: switch (spec->board_config) { case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, @@ -4895,7 +4895,7 @@ static int patch_stac9205(struct hda_codec *codec) stac92xx_set_config_reg(codec, 0x20, 0x1c410030); /* Enable unsol response for GPIO4/Dock HP connection */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x10); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, -- cgit v0.10.2 From eb60fa1066622ddb2278732cf61e0c4544e82c6f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:28:59 +0900 Subject: block: fix add_partition() error path Partition stats structure was not freed on devt allocation failure path. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 633f7a0..90bcf136 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -395,7 +395,7 @@ int add_partition(struct gendisk *disk, int partno, err = blk_alloc_devt(p, &devt); if (err) - goto out_free; + goto out_free_stats; pdev->devt = devt; /* delay uevent until 'holders' subdir is created */ @@ -426,6 +426,8 @@ int add_partition(struct gendisk *disk, int partno, return 0; +out_free_stats: + free_part_stats(p); out_free: kfree(p); return err; -- cgit v0.10.2 From ba32929a91fe2c0628f5be62d1597b379c8d3062 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:29:58 +0900 Subject: block: make add_partition() return pointer to hd_struct Make add_partition() return pointer to the new hd_struct on success and ERR_PTR() value on failure. This change will be used to fix md autodetection bug. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe diff --git a/block/ioctl.c b/block/ioctl.c index c832d63..d03985b 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -18,7 +18,6 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user struct disk_part_iter piter; long long start, length; int partno; - int err; if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -61,10 +60,10 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user disk_part_iter_exit(&piter); /* all seems OK */ - err = add_partition(disk, partno, start, length, - ADDPART_FLAG_NONE); + part = add_partition(disk, partno, start, length, + ADDPART_FLAG_NONE); mutex_unlock(&bdev->bd_mutex); - return err; + return IS_ERR(part) ? PTR_ERR(part) : 0; case BLKPG_DEL_PARTITION: part = disk_get_part(disk, partno); if (!part) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 90bcf136..6330253 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -348,8 +348,8 @@ static ssize_t whole_disk_show(struct device *dev, static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH, whole_disk_show, NULL); -int add_partition(struct gendisk *disk, int partno, - sector_t start, sector_t len, int flags) +struct hd_struct *add_partition(struct gendisk *disk, int partno, + sector_t start, sector_t len, int flags) { struct hd_struct *p; dev_t devt = MKDEV(0, 0); @@ -361,15 +361,15 @@ int add_partition(struct gendisk *disk, int partno, err = disk_expand_part_tbl(disk, partno); if (err) - return err; + return ERR_PTR(err); ptbl = disk->part_tbl; if (ptbl->part[partno]) - return -EBUSY; + return ERR_PTR(-EBUSY); p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) - return -ENOMEM; + return ERR_PTR(-EBUSY); if (!init_part_stats(p)) { err = -ENOMEM; @@ -424,20 +424,20 @@ int add_partition(struct gendisk *disk, int partno, if (!ddev->uevent_suppress) kobject_uevent(&pdev->kobj, KOBJ_ADD); - return 0; + return p; out_free_stats: free_part_stats(p); out_free: kfree(p); - return err; + return ERR_PTR(err); out_del: kobject_put(p->holder_dir); device_del(pdev); out_put: put_device(pdev); blk_free_devt(devt); - return err; + return ERR_PTR(err); } /* Not exported, helper to add_disk(). */ @@ -568,10 +568,11 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) disk->disk_name, p, (unsigned long long) size); size = get_capacity(disk) - from; } - res = add_partition(disk, p, from, size, state->parts[p].flags); - if (res) { - printk(KERN_ERR " %s: p%d could not be added: %d\n", - disk->disk_name, p, -res); + part = add_partition(disk, p, from, size, + state->parts[p].flags); + if (IS_ERR(part)) { + printk(KERN_ERR " %s: p%d could not be added: %ld\n", + disk->disk_name, p, -PTR_ERR(part)); continue; } #ifdef CONFIG_BLK_DEV_MD diff --git a/include/linux/genhd.h b/include/linux/genhd.h index e439e6a..3df7742 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -522,7 +522,9 @@ extern char *disk_name (struct gendisk *hd, int partno, char *buf); extern int disk_expand_part_tbl(struct gendisk *disk, int target); extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev); -extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int); +extern struct hd_struct * __must_check add_partition(struct gendisk *disk, + int partno, sector_t start, + sector_t len, int flags); extern void delete_partition(struct gendisk *, int); extern void printk_all_partitions(void); -- cgit v0.10.2 From 55e8e30c382d25c34f8aafcc78efec948571a941 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:30:47 +0900 Subject: block/md: fix md autodetection Block ext devt conversion missed md_autodetect_dev() call in rescan_partitions() leaving md autodetect unable to see partitions. Fix it. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 6330253..6d5b213 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -577,7 +577,7 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) } #ifdef CONFIG_BLK_DEV_MD if (state->parts[p].flags & ADDPART_FLAG_RAID) - md_autodetect_dev(bdev->bd_dev+p); + md_autodetect_dev(part_to_dev(part)->devt); #endif } kfree(state); -- cgit v0.10.2 From 561ec68e4de7947167937c49c451728e6b19e63b Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Fri, 14 Nov 2008 08:26:30 +0100 Subject: block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash We run into system boot failure with kernel 2.6.28-rc. We found it on a couple of machines, including T61 notebook, nehalem machine, and another HPC NX6325 notebook. All the machines use FedoraCore 8 or FedoraCore 9. With kernel prior to 2.6.28-rc, system boot doesn't fail. I debug it and locate the root cause. Pls. see http://bugzilla.kernel.org/show_bug.cgi?id=11899 https://bugzilla.redhat.com/show_bug.cgi?id=471517 As a matter of fact, there are 2 bugs. 1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times and fails once. nash has a bug. Some of its functions misuse return value 0. Sometimes, 0 means timeout and no uevent available. Sometimes, 0 means nash gets an uevent, but the uevent isn't block-related (for exmaple, usb). If by coincidence, kernel tells nash that uevents are available, but kernel also set timeout, nash might stops collecting other uevents in queue if current uevent isn't block-related. I work out a patch for nash to fix it. http://bugzilla.kernel.org/attachment.cgi?id=18858 2) root=LABEL=/, system always can't boot. initrd init reports switchroot fails. Here is an executation branch of nash when booting: (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop) (2) nash query /proc/devices with the major number; It found line "8 sd"; (3) nash use 'sd' to search its own probe table to find device (DISK) type for the device and add it to its own list; (4) Later on, it probes all devices in its list to get filesystem labels; scsi register "8 sd" always. When major is 259, nash fails to find the device(DISK) type. I enables CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up for device /dev/sda1, which causes nash to fail to find device (DISK) type. To fixing issue 2), I create a patch for nash and another patch for kernel. http://bugzilla.kernel.org/attachment.cgi?id=18859 http://bugzilla.kernel.org/attachment.cgi?id=18837 Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new block device in proc/devices. With 2 patches on nash and 1 patch on kernel, I boot my machines for dozens of times without failure. Signed-off-by Zhang Yanmin Acked-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index 4e5e749..27549e4 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -768,6 +768,8 @@ static int __init genhd_device_init(void) bdev_map = kobj_map_init(base_probe, &block_class_lock); blk_dev_init(); + register_blkdev(BLOCK_EXT_MAJOR, "blkext"); + #ifndef CONFIG_SYSFS_DEPRECATED /* create top-level block dir */ block_depr = kobject_create_and_add("block", NULL); -- cgit v0.10.2 From 68aee07f9bad2c830a898cf6d6bfc11ea24efc40 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 14 Nov 2008 09:44:33 +0100 Subject: Release old elevator on change elevator We should release old elevator when change to use a new one. Signed-off-by: Zhao Lei Signed-off-by: Jens Axboe diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b220c68..2d19f0c 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -338,12 +338,18 @@ wait: static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) { struct request_queue *rq; + elevator_t *old_e; rq = blk_init_queue(do_blkif_request, &blkif_io_lock); if (rq == NULL) return -1; - elevator_init(rq, "noop"); + old_e = rq->elevator; + if (IS_ERR_VALUE(elevator_init(rq, "noop"))) + printk(KERN_WARNING + "blkfront: Switch elevator failed, use default\n"); + else + elevator_exit(old_e); /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_hardsect_size(rq, sector_size); -- cgit v0.10.2 From 98ba4031ab2adc8b394295e68aa4c8fe9d5060db Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Fri, 14 Nov 2008 10:44:59 +0100 Subject: relay: fix cpu offline problem relay_open() will close allocated buffers when failed. but if cpu offlined, some buffer will not be closed. this patch fixed it. and did cleanup for relay_reset() too. Signed-off-by: Lai Jiangshan Signed-off-by: Jens Axboe diff --git a/kernel/relay.c b/kernel/relay.c index 8d13a78..32b0bef 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -400,7 +400,7 @@ void relay_reset(struct rchan *chan) } mutex_lock(&relay_channels_mutex); - for_each_online_cpu(i) + for_each_possible_cpu(i) if (chan->buf[i]) __relay_reset(chan->buf[i], 0); mutex_unlock(&relay_channels_mutex); @@ -611,10 +611,9 @@ struct rchan *relay_open(const char *base_filename, return chan; free_bufs: - for_each_online_cpu(i) { - if (!chan->buf[i]) - break; - relay_close_buf(chan->buf[i]); + for_each_possible_cpu(i) { + if (chan->buf[i]) + relay_close_buf(chan->buf[i]); } kref_put(&chan->kref, relay_destroy_channel); -- cgit v0.10.2 From c26156b2534c75bb3cdedf76f6ad1340971cf5bd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 18 Nov 2008 15:07:05 +0100 Subject: block: hold extra reference to bio in blk_rq_map_user_iov() If the size passed in is OK but we end up mapping too many segments, we call the unmap path directly like from IO completion. But from IO completion we have an extra reference to the bio, so this error case goes OOPS when it attempts to free and already free bio. Fix it by getting an extra reference to the bio before calling the unmap failure case. Reported-by: Petr Vandrovec Signed-off-by: Jens Axboe diff --git a/block/blk-map.c b/block/blk-map.c index 4849fa3..0f4b4b8 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -217,6 +217,12 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, return PTR_ERR(bio); if (bio->bi_size != len) { + /* + * Grab an extra reference to this bio, as bio_unmap_user() + * expects to be able to drop it twice as it happens on the + * normal IO completion path + */ + bio_get(bio); bio_endio(bio, 0); bio_unmap_user(bio); return -EINVAL; -- cgit v0.10.2 From a6a0c4ca7edb378a8a7332501f097089cb1051c4 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 18 Nov 2008 06:56:51 -0800 Subject: suspend: use WARN not WARN_ON to print the message By using WARN(), kerneloops.org can collect which component is causing the delay and make statistics about that. suspend_test_finish() is currently the number 2 item but unless we can collect who's causing it we're not going to be able to fix the hot topic ones.. Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds diff --git a/kernel/power/main.c b/kernel/power/main.c index 19122cf..b8f7ce9 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -174,7 +174,7 @@ static void suspend_test_finish(const char *label) * has some performance issues. The stack dump of a WARN_ON * is more likely to get the right attention than a printk... */ - WARN_ON(msec > (TEST_SUSPEND_SECONDS * 1000)); + WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label); } #else -- cgit v0.10.2