From 038b892aa925cd0530472284c7b4b3f32e2b1f56 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Mon, 13 Oct 2014 15:52:44 -0700 Subject: clk: RK808: add clkout driver for RK808 This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Signed-off-by: Chris Zhong Reviewed-by: Doug Anderson Tested-by: Doug Anderson Tested-by: Heiko Stuebner Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Samuel Ortiz says: Cc: Alessandro Zummo Cc: Olof Johansson Cc: Dmitry Torokhov Cc: Javier Martinez Canillas Cc: Kever Yang Cc: Li Zhong Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index cfd3af7..84e0590 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_RK808 + tristate "Clock driver for RK808" + depends on MFD_RK808 + ---help--- + This driver supports RK808 crystal oscillator clock. These + multi-function devices have two fixed-rate oscillators, + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off + by control register. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f537a0b..99f53d5 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o +obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c new file mode 100644 index 0000000..83902b9 --- /dev/null +++ b/drivers/clk/clk-rk808.c @@ -0,0 +1,170 @@ +/* + * Clkout driver for Rockchip RK808 + * + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * Author:Chris Zhong + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RK808_NR_OUTPUT 2 + +struct rk808_clkout { + struct rk808 *rk808; + struct clk_onecell_data clk_data; + struct clk_hw clkout1_hw; + struct clk_hw clkout2_hw; +}; + +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 32768; +} + +static int rk808_clkout2_enable(struct clk_hw *hw, bool enable) +{ + struct rk808_clkout *rk808_clkout = container_of(hw, + struct rk808_clkout, + clkout2_hw); + struct rk808 *rk808 = rk808_clkout->rk808; + + return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG, + CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0); +} + +static int rk808_clkout2_prepare(struct clk_hw *hw) +{ + return rk808_clkout2_enable(hw, true); +} + +static void rk808_clkout2_unprepare(struct clk_hw *hw) +{ + rk808_clkout2_enable(hw, false); +} + +static int rk808_clkout2_is_prepared(struct clk_hw *hw) +{ + struct rk808_clkout *rk808_clkout = container_of(hw, + struct rk808_clkout, + clkout2_hw); + struct rk808 *rk808 = rk808_clkout->rk808; + uint32_t val; + + int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val); + + if (ret < 0) + return ret; + + return (val & CLK32KOUT2_EN) ? 1 : 0; +} + +static const struct clk_ops rk808_clkout1_ops = { + .recalc_rate = rk808_clkout_recalc_rate, +}; + +static const struct clk_ops rk808_clkout2_ops = { + .prepare = rk808_clkout2_prepare, + .unprepare = rk808_clkout2_unprepare, + .is_prepared = rk808_clkout2_is_prepared, + .recalc_rate = rk808_clkout_recalc_rate, +}; + +static int rk808_clkout_probe(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct i2c_client *client = rk808->i2c; + struct device_node *node = client->dev.of_node; + struct clk_init_data init = {}; + struct clk **clk_table; + struct rk808_clkout *rk808_clkout; + + rk808_clkout = devm_kzalloc(&client->dev, + sizeof(*rk808_clkout), GFP_KERNEL); + if (!rk808_clkout) + return -ENOMEM; + + rk808_clkout->rk808 = rk808; + + clk_table = devm_kcalloc(&client->dev, RK808_NR_OUTPUT, + sizeof(struct clk *), GFP_KERNEL); + if (!clk_table) + return -ENOMEM; + + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + init.name = "rk808-clkout1"; + init.ops = &rk808_clkout1_ops; + rk808_clkout->clkout1_hw.init = &init; + + /* optional override of the clockname */ + of_property_read_string_index(node, "clock-output-names", + 0, &init.name); + + clk_table[0] = devm_clk_register(&client->dev, + &rk808_clkout->clkout1_hw); + if (IS_ERR(clk_table[0])) + return PTR_ERR(clk_table[0]); + + init.name = "rk808-clkout2"; + init.ops = &rk808_clkout2_ops; + rk808_clkout->clkout2_hw.init = &init; + + /* optional override of the clockname */ + of_property_read_string_index(node, "clock-output-names", + 1, &init.name); + + clk_table[1] = devm_clk_register(&client->dev, + &rk808_clkout->clkout2_hw); + if (IS_ERR(clk_table[1])) + return PTR_ERR(clk_table[1]); + + rk808_clkout->clk_data.clks = clk_table; + rk808_clkout->clk_data.clk_num = RK808_NR_OUTPUT; + + return of_clk_add_provider(node, of_clk_src_onecell_get, + &rk808_clkout->clk_data); +} + +static int rk808_clkout_remove(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct i2c_client *client = rk808->i2c; + struct device_node *node = client->dev.of_node; + + of_clk_del_provider(node); + + return 0; +} + +static struct platform_driver rk808_clkout_driver = { + .probe = rk808_clkout_probe, + .remove = rk808_clkout_remove, + .driver = { + .name = "rk808-clkout", + }, +}; + +module_platform_driver(rk808_clkout_driver); + +MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs"); +MODULE_AUTHOR("Chris Zhong "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rk808-clkout"); -- cgit v0.10.2