From a6fe3771d389cc660933509b7dfb945c596636f5 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:22:32 +0200 Subject: CLK: TI: DPLL: simplify autoidle register detection logic AMxxxx dpll_data previously had autoidle_mask set, even if these SoC:s don't have autoidle register. Remove the bit-field value as it is unused, also drop the unnecessary DPLL_HAS_AUTOIDLE flag passing during init, as we can just simply check against the contents of the autoidle_mask. Signed-off-by: Tero Kristo diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 7e498a4..dda262d 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -25,8 +25,6 @@ #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ -#define DPLL_HAS_AUTOIDLE 0x1 - #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ defined(CONFIG_SOC_DRA7XX) static const struct clk_ops dpll_m4xen_ck_ops = { @@ -193,14 +191,12 @@ static void ti_clk_register_dpll_x2(struct device_node *node, * @node: device node containing the DPLL info * @ops: ops for the DPLL * @ddt: DPLL data template to use - * @init_flags: flags for controlling init types * * Initializes a DPLL clock from device tree data. */ static void __init of_ti_dpll_setup(struct device_node *node, const struct clk_ops *ops, - const struct dpll_data *ddt, - u8 init_flags) + const struct dpll_data *ddt) { struct clk_hw_omap *clk_hw = NULL; struct clk_init_data *init = NULL; @@ -247,7 +243,7 @@ static void __init of_ti_dpll_setup(struct device_node *node, if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) goto cleanup; - if (init_flags & DPLL_HAS_AUTOIDLE) { + if (dd->autoidle_mask) { dd->autoidle_reg = ti_clk_get_reg_addr(node, 3); if (!dd->autoidle_reg) goto cleanup; @@ -310,7 +306,7 @@ static void __init of_ti_omap3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", of_ti_omap3_dpll_setup); @@ -329,7 +325,7 @@ static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) .freqsel_mask = 0xf0, }; - of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", of_ti_omap3_core_dpll_setup); @@ -349,7 +345,7 @@ static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", of_ti_omap3_per_dpll_setup); @@ -371,7 +367,7 @@ static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", of_ti_omap3_per_jtype_dpll_setup); @@ -391,7 +387,7 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); @@ -410,7 +406,7 @@ static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", of_ti_omap4_core_dpll_setup); @@ -433,7 +429,7 @@ static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", of_ti_omap4_m4xen_dpll_setup); @@ -454,7 +450,7 @@ static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd, DPLL_HAS_AUTOIDLE); + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); } CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", of_ti_omap4_jtype_dpll_setup); @@ -465,7 +461,6 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -474,7 +469,7 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", of_ti_am3_no_gate_dpll_setup); @@ -484,7 +479,6 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 4095, @@ -494,7 +488,7 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", of_ti_am3_jtype_dpll_setup); @@ -504,7 +498,6 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -514,7 +507,7 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, "ti,am3-dpll-no-gate-j-type-clock", @@ -525,7 +518,6 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -534,7 +526,7 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); @@ -543,7 +535,6 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) const struct dpll_data dd = { .idlest_mask = 0x1, .enable_mask = 0x7, - .autoidle_mask = 0x7, .mult_mask = 0x7ff << 8, .div1_mask = 0x7f, .max_multiplier = 2047, @@ -552,7 +543,7 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), }; - of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd, 0); + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); -- cgit v0.10.2 From aa76fcf473f6bfa839f37f77b6fdb71f0fb88d8f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:36:21 +0200 Subject: CLK: TI: DPLL: add support for omap2 core dpll OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 30bfdb7..50a1a42 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -30,6 +30,7 @@ Required properties: "ti,am3-dpll-clock", "ti,am3-dpll-core-clock", "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks, first entry lists reference clock @@ -41,6 +42,7 @@ Required properties: "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers Optional properties: - DPLL mode setting - defining any one or more of the following overrides @@ -73,3 +75,10 @@ Examples: clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x90>, <0x5c>, <0x68>; }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index bda767a..f6e9904 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -279,7 +279,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index 539dc08..45f41a4 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, - unsigned long parent_rate); -int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, - unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index dda262d..34e2339 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -35,21 +35,18 @@ static const struct clk_ops dpll_m4xen_ck_ops = { .set_rate = &omap3_noncore_dpll_set_rate, .get_parent = &omap2_init_dpll_parent, }; +#else +static const struct clk_ops dpll_m4xen_ck_ops = {}; #endif +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ + defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static const struct clk_ops dpll_core_ck_ops = { .recalc_rate = &omap3_dpll_recalc, .get_parent = &omap2_init_dpll_parent, }; -#ifdef CONFIG_ARCH_OMAP3 -static const struct clk_ops omap3_dpll_core_ck_ops = { - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, -}; -#endif - static const struct clk_ops dpll_ck_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, @@ -65,6 +62,33 @@ static const struct clk_ops dpll_no_gate_ck_ops = { .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; +#else +static const struct clk_ops dpll_core_ck_ops = {}; +static const struct clk_ops dpll_ck_ops = {}; +static const struct clk_ops dpll_no_gate_ck_ops = {}; +const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static const struct clk_ops omap2_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap2_dpllcore_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap2_reprogram_dpllcore, +}; +#else +static const struct clk_ops omap2_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#else +static const struct clk_ops omap3_dpll_core_ck_ops = {}; +#endif #ifdef CONFIG_ARCH_OMAP3 static const struct clk_ops omap3_dpll_ck_ops = { @@ -237,10 +261,27 @@ static void __init of_ti_dpll_setup(struct device_node *node, init->parent_names = parent_names; dd->control_reg = ti_clk_get_reg_addr(node, 0); - dd->idlest_reg = ti_clk_get_reg_addr(node, 1); - dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); - if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) + /* + * Special case for OMAP2 DPLL, register order is different due to + * missing idlest_reg, also clkhwops is different. Detected from + * missing idlest_mask. + */ + if (!dd->idlest_mask) { + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1); +#ifdef CONFIG_ARCH_OMAP2 + clk_hw->ops = &clkhwops_omap2xxx_dpll; + omap2xxx_clkt_dpllcore_init(&clk_hw->hw); +#endif + } else { + dd->idlest_reg = ti_clk_get_reg_addr(node, 1); + if (!dd->idlest_reg) + goto cleanup; + + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); + } + + if (!dd->control_reg || !dd->mult_div1_reg) goto cleanup; if (dd->autoidle_mask) { @@ -547,3 +588,18 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); + +static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .enable_mask = 0x3, + .mult_mask = 0x3ff << 12, + .div1_mask = 0xf << 8, + .max_divider = 16, + .min_divider = 1, + }; + + of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", + of_ti_omap2_core_dpll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 4a21a87..753878c 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -259,6 +259,11 @@ int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap3_clk_lock_dpll5(void); +unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); @@ -287,6 +292,7 @@ static inline void of_ti_clk_allow_autoidle_all(void) { } static inline void of_ti_clk_deny_autoidle_all(void) { } #endif +extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v0.10.2 From 4d008589e271e28eae728eef7f5fb1f658f12b9f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 16:06:34 +0200 Subject: CLK: TI: APLL: add support for omap2 aplls This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index 7faf5a6..ade4dd4 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that. [2] Documentation/devicetree/bindings/clock/ti/dpll.txt Required properties: -- compatible : shall be "ti,dra7-apll-clock" +- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks (clk-ref and clk-bypass) - reg : address and length of the register set for controlling the APLL. It contains the information of registers in the following order: - "control" - contains the control register base address - "idlest" - contains the idlest register base address + "control" - contains the control register offset + "idlest" - contains the idlest register offset + "autoidle" - contains the autoidle register offset (OMAP2 only) +- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) +- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) +- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) Examples: - apll_pcie_ck: apll_pcie_ck@4a008200 { + apll_pcie_ck: apll_pcie_ck { #clock-cells = <0>; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; - reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; + reg = <0x021c>, <0x0220>; compatible = "ti,dra7-apll-clock"; }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index f6e9904..eb441d1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -178,17 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -struct clk_hw_omap_ops { - void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); - void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, - u8 *other_bit); - void (*allow_idle)(struct clk_hw_omap *oclk); - void (*deny_idle)(struct clk_hw_omap *oclk); -}; - unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index b986f61..5428c9c 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -221,3 +221,184 @@ cleanup: kfree(init); } CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup); + +#define OMAP2_EN_APLL_LOCKED 0x3 +#define OMAP2_EN_APLL_STOPPED 0x0 + +static int omap2_apll_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ad->enable_mask; + + v >>= __ffs(ad->enable_mask); + + return v == OMAP2_EN_APLL_LOCKED ? 1 : 0; +} + +static unsigned long omap2_apll_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + if (omap2_apll_is_enabled(hw)) + return clk->fixed_rate; + + return 0; +} + +static int omap2_apll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + int i = 0; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_LOCKED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); + + while (1) { + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + if (v & ad->idlest_mask) + break; + if (i > MAX_APLL_WAIT_TRIES) + break; + i++; + udelay(1); + } + + if (i == MAX_APLL_WAIT_TRIES) { + pr_warn("%s failed to transition to locked\n", + __clk_get_name(clk->hw.clk)); + return -EBUSY; + } + + return 0; +} + +static void omap2_apll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_STOPPED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +static struct clk_ops omap2_apll_ops = { + .enable = &omap2_apll_enable, + .disable = &omap2_apll_disable, + .is_enabled = &omap2_apll_is_enabled, + .recalc_rate = &omap2_apll_recalc, +}; + +static void omap2_apll_set_autoidle(struct clk_hw_omap *clk, u32 val) +{ + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->autoidle_reg); + v &= ~ad->autoidle_mask; + v |= val << __ffs(ad->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +#define OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 +#define OMAP2_APLL_AUTOIDLE_DISABLE 0x0 + +static void omap2_apll_allow_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP); +} + +static void omap2_apll_deny_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_DISABLE); +} + +static struct clk_hw_omap_ops omap2_apll_hwops = { + .allow_idle = &omap2_apll_allow_idle, + .deny_idle = &omap2_apll_deny_idle, +}; + +static void __init of_omap2_apll_setup(struct device_node *node) +{ + struct dpll_data *ad = NULL; + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + struct clk *clk; + const char *parent_name; + u32 val; + + ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + + if (!ad || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = ad; + clk_hw->hw.init = init; + init->ops = &omap2_apll_ops; + init->name = node->name; + clk_hw->ops = &omap2_apll_hwops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents != 1) { + pr_err("%s must have one parent\n", node->name); + goto cleanup; + } + + parent_name = of_clk_get_parent_name(node, 0); + init->parent_names = &parent_name; + + if (of_property_read_u32(node, "ti,clock-frequency", &val)) { + pr_err("%s missing clock-frequency\n", node->name); + goto cleanup; + } + clk_hw->fixed_rate = val; + + if (of_property_read_u32(node, "ti,bit-shift", &val)) { + pr_err("%s missing bit-shift\n", node->name); + goto cleanup; + } + + clk_hw->enable_bit = val; + ad->enable_mask = 0x3 << val; + ad->autoidle_mask = 0x3 << val; + + if (of_property_read_u32(node, "ti,idlest-shift", &val)) { + pr_err("%s missing idlest-shift\n", node->name); + goto cleanup; + } + + ad->idlest_mask = 1 << val; + + ad->control_reg = ti_clk_get_reg_addr(node, 0); + ad->autoidle_reg = ti_clk_get_reg_addr(node, 1); + ad->idlest_reg = ti_clk_get_reg_addr(node, 2); + + if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg) + goto cleanup; + + clk = clk_register(NULL, &clk_hw->hw); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(init); + return; + } +cleanup: + kfree(ad); + kfree(clk_hw); + kfree(init); +} +CLK_OF_DECLARE(omap2_apll_clock, "ti,omap2-apll-clock", + of_omap2_apll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 753878c..44bf840 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -94,7 +94,26 @@ struct dpll_data { u8 flags; }; -struct clk_hw_omap_ops; +struct clk_hw_omap; + +/** + * struct clk_hw_omap_ops - OMAP clk ops + * @find_idlest: find idlest register information for a clock + * @find_companion: find companion clock register information for a clock, + * basically converts CM_ICLKEN* <-> CM_FCLKEN* + * @allow_idle: enables autoidle hardware functionality for a clock + * @deny_idle: prevent autoidle hardware functionality for a clock + */ +struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); + void (*find_companion)(struct clk_hw_omap *oclk, + void __iomem **other_reg, + u8 *other_bit); + void (*allow_idle)(struct clk_hw_omap *oclk); + void (*deny_idle)(struct clk_hw_omap *oclk); +}; /** * struct clk_hw_omap - OMAP struct clk -- cgit v0.10.2 From 9fa160cb9f2f51ef8274df7b4f390edf6ae491c3 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 27 Feb 2014 17:21:33 +0200 Subject: CLK: TI: gate: fixed DT binding documentation bugs ti,composite-gate-clock documentation was missing, also the register offset examples were wrong. Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 125281a..03f8fde 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -25,6 +25,11 @@ Required properties: to map clockdomains properly "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, required for a hardware errata + "ti,composite-gate-clock" - composite gate clock, to be part of composite + clock + "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait + for clock to be active before returning + from clk_enable() - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : offset for register controlling adjustable gate, not needed for @@ -41,7 +46,7 @@ Examples: #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&core_96m_fck>; - reg = <0x48004a00 0x4>; + reg = <0x0a00>; ti,bit-shift = <25>; }; @@ -57,7 +62,7 @@ Examples: #clock-cells = <0>; compatible = "ti,dss-gate-clock"; clocks = <&dpll4_m4x2_ck>; - reg = <0x48004e00 0x4>; + reg = <0x0e00>; ti,bit-shift = <0>; }; @@ -65,7 +70,7 @@ Examples: #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; - reg = <0x4800259c 0x4>; + reg = <0x059c>; ti,bit-shift = <1>; }; @@ -80,6 +85,22 @@ Examples: compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m2x2_mul_ck>; ti,bit-shift = <0x1b>; - reg = <0x48004d00 0x4>; + reg = <0x0d00>; ti,set-bit-to-disable; }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; -- cgit v0.10.2 From de742570745e12b53c70130ace958f2a60044000 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Feb 2014 19:16:07 +0200 Subject: CLK: TI: interface: add support for omap2430 specific interface clock OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 064e8ca..3111a40 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling + "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW + handling - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : base address for the control register diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index eb441d1..12f54d4 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -268,7 +268,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ extern const struct clksel_rate div_1_0_rates[]; diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c index 320a2b1..9c3e8c4 100644 --- a/drivers/clk/ti/interface.c +++ b/drivers/clk/ti/interface.c @@ -94,6 +94,7 @@ static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock", of_ti_no_wait_interface_clk_setup); +#ifdef CONFIG_ARCH_OMAP3 static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node) { _of_ti_interface_clk_setup(node, @@ -123,3 +124,13 @@ static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock", of_ti_am35xx_interface_clk_setup); +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static void __init of_ti_omap2430_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_omap2430_i2chs_wait); +} +CLK_OF_DECLARE(ti_omap2430_interface_clk, "ti,omap2430-interface-clock", + of_ti_omap2430_interface_clk_setup); +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 44bf840..a8390d4 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -312,6 +312,7 @@ static inline void of_ti_clk_deny_autoidle_all(void) { } #endif extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v0.10.2 From be67c3bf382c591d8267e0ef12d80041854731d9 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 17:52:57 +0200 Subject: CLK: TI: OMAP2: add clock init support Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4319d40..4afeaed 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -3,6 +3,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o +obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o clk-3xxx.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c new file mode 100644 index 0000000..f6400fb --- /dev/null +++ b/drivers/clk/ti/clk-2xxx.c @@ -0,0 +1,254 @@ +/* + * OMAP2 Clock init + * + * Copyright (C) 2013 Texas Instruments, Inc + * Tero Kristo (t-kristo@ti.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static struct ti_dt_clk omap2xxx_clks[] = { + DT_CLK(NULL, "func_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"), + DT_CLK(NULL, "virt_12m_ck", "virt_12m_ck"), + DT_CLK(NULL, "virt_13m_ck", "virt_13m_ck"), + DT_CLK(NULL, "virt_19200000_ck", "virt_19200000_ck"), + DT_CLK(NULL, "virt_26m_ck", "virt_26m_ck"), + DT_CLK(NULL, "aplls_clkin_ck", "aplls_clkin_ck"), + DT_CLK(NULL, "aplls_clkin_x2_ck", "aplls_clkin_x2_ck"), + DT_CLK(NULL, "osc_ck", "osc_ck"), + DT_CLK(NULL, "sys_ck", "sys_ck"), + DT_CLK(NULL, "alt_ck", "alt_ck"), + DT_CLK(NULL, "mcbsp_clks", "mcbsp_clks"), + DT_CLK(NULL, "dpll_ck", "dpll_ck"), + DT_CLK(NULL, "apll96_ck", "apll96_ck"), + DT_CLK(NULL, "apll54_ck", "apll54_ck"), + DT_CLK(NULL, "func_54m_ck", "func_54m_ck"), + DT_CLK(NULL, "core_ck", "core_ck"), + DT_CLK(NULL, "func_96m_ck", "func_96m_ck"), + DT_CLK(NULL, "func_48m_ck", "func_48m_ck"), + DT_CLK(NULL, "func_12m_ck", "func_12m_ck"), + DT_CLK(NULL, "sys_clkout_src", "sys_clkout_src"), + DT_CLK(NULL, "sys_clkout", "sys_clkout"), + DT_CLK(NULL, "emul_ck", "emul_ck"), + DT_CLK(NULL, "mpu_ck", "mpu_ck"), + DT_CLK(NULL, "dsp_fck", "dsp_fck"), + DT_CLK(NULL, "gfx_3d_fck", "gfx_3d_fck"), + DT_CLK(NULL, "gfx_2d_fck", "gfx_2d_fck"), + DT_CLK(NULL, "gfx_ick", "gfx_ick"), + DT_CLK("omapdss_dss", "ick", "dss_ick"), + DT_CLK(NULL, "dss_ick", "dss_ick"), + DT_CLK(NULL, "dss1_fck", "dss1_fck"), + DT_CLK(NULL, "dss2_fck", "dss2_fck"), + DT_CLK(NULL, "dss_54m_fck", "dss_54m_fck"), + DT_CLK(NULL, "core_l3_ck", "core_l3_ck"), + DT_CLK(NULL, "ssi_fck", "ssi_ssr_sst_fck"), + DT_CLK(NULL, "usb_l4_ick", "usb_l4_ick"), + DT_CLK(NULL, "l4_ck", "l4_ck"), + DT_CLK(NULL, "ssi_l4_ick", "ssi_l4_ick"), + DT_CLK(NULL, "gpt1_ick", "gpt1_ick"), + DT_CLK(NULL, "gpt1_fck", "gpt1_fck"), + DT_CLK(NULL, "gpt2_ick", "gpt2_ick"), + DT_CLK(NULL, "gpt2_fck", "gpt2_fck"), + DT_CLK(NULL, "gpt3_ick", "gpt3_ick"), + DT_CLK(NULL, "gpt3_fck", "gpt3_fck"), + DT_CLK(NULL, "gpt4_ick", "gpt4_ick"), + DT_CLK(NULL, "gpt4_fck", "gpt4_fck"), + DT_CLK(NULL, "gpt5_ick", "gpt5_ick"), + DT_CLK(NULL, "gpt5_fck", "gpt5_fck"), + DT_CLK(NULL, "gpt6_ick", "gpt6_ick"), + DT_CLK(NULL, "gpt6_fck", "gpt6_fck"), + DT_CLK(NULL, "gpt7_ick", "gpt7_ick"), + DT_CLK(NULL, "gpt7_fck", "gpt7_fck"), + DT_CLK(NULL, "gpt8_ick", "gpt8_ick"), + DT_CLK(NULL, "gpt8_fck", "gpt8_fck"), + DT_CLK(NULL, "gpt9_ick", "gpt9_ick"), + DT_CLK(NULL, "gpt9_fck", "gpt9_fck"), + DT_CLK(NULL, "gpt10_ick", "gpt10_ick"), + DT_CLK(NULL, "gpt10_fck", "gpt10_fck"), + DT_CLK(NULL, "gpt11_ick", "gpt11_ick"), + DT_CLK(NULL, "gpt11_fck", "gpt11_fck"), + DT_CLK(NULL, "gpt12_ick", "gpt12_ick"), + DT_CLK(NULL, "gpt12_fck", "gpt12_fck"), + DT_CLK("omap-mcbsp.1", "ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_ick", "mcbsp1_ick"), + DT_CLK(NULL, "mcbsp1_fck", "mcbsp1_fck"), + DT_CLK("omap-mcbsp.2", "ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_ick", "mcbsp2_ick"), + DT_CLK(NULL, "mcbsp2_fck", "mcbsp2_fck"), + DT_CLK("omap2_mcspi.1", "ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_ick", "mcspi1_ick"), + DT_CLK(NULL, "mcspi1_fck", "mcspi1_fck"), + DT_CLK("omap2_mcspi.2", "ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_ick", "mcspi2_ick"), + DT_CLK(NULL, "mcspi2_fck", "mcspi2_fck"), + DT_CLK(NULL, "uart1_ick", "uart1_ick"), + DT_CLK(NULL, "uart1_fck", "uart1_fck"), + DT_CLK(NULL, "uart2_ick", "uart2_ick"), + DT_CLK(NULL, "uart2_fck", "uart2_fck"), + DT_CLK(NULL, "uart3_ick", "uart3_ick"), + DT_CLK(NULL, "uart3_fck", "uart3_fck"), + DT_CLK(NULL, "gpios_ick", "gpios_ick"), + DT_CLK(NULL, "gpios_fck", "gpios_fck"), + DT_CLK("omap_wdt", "ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_ick", "mpu_wdt_ick"), + DT_CLK(NULL, "mpu_wdt_fck", "mpu_wdt_fck"), + DT_CLK(NULL, "sync_32k_ick", "sync_32k_ick"), + DT_CLK(NULL, "wdt1_ick", "wdt1_ick"), + DT_CLK(NULL, "omapctrl_ick", "omapctrl_ick"), + DT_CLK("omap24xxcam", "fck", "cam_fck"), + DT_CLK(NULL, "cam_fck", "cam_fck"), + DT_CLK("omap24xxcam", "ick", "cam_ick"), + DT_CLK(NULL, "cam_ick", "cam_ick"), + DT_CLK(NULL, "mailboxes_ick", "mailboxes_ick"), + DT_CLK(NULL, "wdt4_ick", "wdt4_ick"), + DT_CLK(NULL, "wdt4_fck", "wdt4_fck"), + DT_CLK(NULL, "mspro_ick", "mspro_ick"), + DT_CLK(NULL, "mspro_fck", "mspro_fck"), + DT_CLK(NULL, "fac_ick", "fac_ick"), + DT_CLK(NULL, "fac_fck", "fac_fck"), + DT_CLK("omap_hdq.0", "ick", "hdq_ick"), + DT_CLK(NULL, "hdq_ick", "hdq_ick"), + DT_CLK("omap_hdq.0", "fck", "hdq_fck"), + DT_CLK(NULL, "hdq_fck", "hdq_fck"), + DT_CLK("omap_i2c.1", "ick", "i2c1_ick"), + DT_CLK(NULL, "i2c1_ick", "i2c1_ick"), + DT_CLK("omap_i2c.2", "ick", "i2c2_ick"), + DT_CLK(NULL, "i2c2_ick", "i2c2_ick"), + DT_CLK(NULL, "gpmc_fck", "gpmc_fck"), + DT_CLK(NULL, "sdma_fck", "sdma_fck"), + DT_CLK(NULL, "sdma_ick", "sdma_ick"), + DT_CLK(NULL, "sdrc_ick", "sdrc_ick"), + DT_CLK(NULL, "des_ick", "des_ick"), + DT_CLK("omap-sham", "ick", "sha_ick"), + DT_CLK(NULL, "sha_ick", "sha_ick"), + DT_CLK("omap_rng", "ick", "rng_ick"), + DT_CLK(NULL, "rng_ick", "rng_ick"), + DT_CLK("omap-aes", "ick", "aes_ick"), + DT_CLK(NULL, "aes_ick", "aes_ick"), + DT_CLK(NULL, "pka_ick", "pka_ick"), + DT_CLK(NULL, "usb_fck", "usb_fck"), + DT_CLK(NULL, "timer_32k_ck", "func_32k_ck"), + DT_CLK(NULL, "timer_sys_ck", "sys_ck"), + DT_CLK(NULL, "timer_ext_ck", "alt_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2420_clks[] = { + DT_CLK(NULL, "sys_clkout2_src", "sys_clkout2_src"), + DT_CLK(NULL, "sys_clkout2", "sys_clkout2"), + DT_CLK(NULL, "dsp_ick", "dsp_ick"), + DT_CLK(NULL, "iva1_ifck", "iva1_ifck"), + DT_CLK(NULL, "iva1_mpu_int_ifck", "iva1_mpu_int_ifck"), + DT_CLK(NULL, "wdt3_ick", "wdt3_ick"), + DT_CLK(NULL, "wdt3_fck", "wdt3_fck"), + DT_CLK("mmci-omap.0", "ick", "mmc_ick"), + DT_CLK(NULL, "mmc_ick", "mmc_ick"), + DT_CLK("mmci-omap.0", "fck", "mmc_fck"), + DT_CLK(NULL, "mmc_fck", "mmc_fck"), + DT_CLK(NULL, "eac_ick", "eac_ick"), + DT_CLK(NULL, "eac_fck", "eac_fck"), + DT_CLK(NULL, "i2c1_fck", "i2c1_fck"), + DT_CLK(NULL, "i2c2_fck", "i2c2_fck"), + DT_CLK(NULL, "vlynq_ick", "vlynq_ick"), + DT_CLK(NULL, "vlynq_fck", "vlynq_fck"), + DT_CLK("musb-hdrc", "fck", "osc_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap2430_clks[] = { + DT_CLK("twl", "fck", "osc_ck"), + DT_CLK(NULL, "iva2_1_ick", "iva2_1_ick"), + DT_CLK(NULL, "mdm_ick", "mdm_ick"), + DT_CLK(NULL, "mdm_osc_ck", "mdm_osc_ck"), + DT_CLK("omap-mcbsp.3", "ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_ick", "mcbsp3_ick"), + DT_CLK(NULL, "mcbsp3_fck", "mcbsp3_fck"), + DT_CLK("omap-mcbsp.4", "ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_ick", "mcbsp4_ick"), + DT_CLK(NULL, "mcbsp4_fck", "mcbsp4_fck"), + DT_CLK("omap-mcbsp.5", "ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_ick", "mcbsp5_ick"), + DT_CLK(NULL, "mcbsp5_fck", "mcbsp5_fck"), + DT_CLK("omap2_mcspi.3", "ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_ick", "mcspi3_ick"), + DT_CLK(NULL, "mcspi3_fck", "mcspi3_fck"), + DT_CLK(NULL, "icr_ick", "icr_ick"), + DT_CLK(NULL, "i2chs1_fck", "i2chs1_fck"), + DT_CLK(NULL, "i2chs2_fck", "i2chs2_fck"), + DT_CLK("musb-omap2430", "ick", "usbhs_ick"), + DT_CLK(NULL, "usbhs_ick", "usbhs_ick"), + DT_CLK("omap_hsmmc.0", "ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_ick", "mmchs1_ick"), + DT_CLK(NULL, "mmchs1_fck", "mmchs1_fck"), + DT_CLK("omap_hsmmc.1", "ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_ick", "mmchs2_ick"), + DT_CLK(NULL, "mmchs2_fck", "mmchs2_fck"), + DT_CLK(NULL, "gpio5_ick", "gpio5_ick"), + DT_CLK(NULL, "gpio5_fck", "gpio5_fck"), + DT_CLK(NULL, "mdm_intc_ick", "mdm_intc_ick"), + DT_CLK("omap_hsmmc.0", "mmchsdb_fck", "mmchsdb1_fck"), + DT_CLK(NULL, "mmchsdb1_fck", "mmchsdb1_fck"), + DT_CLK("omap_hsmmc.1", "mmchsdb_fck", "mmchsdb2_fck"), + DT_CLK(NULL, "mmchsdb2_fck", "mmchsdb2_fck"), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { + "apll96_ck", + "apll54_ck", + "sync_32k_ick", + "omapctrl_ick", + "gpmc_fck", + "sdrc_ick", +}; + +enum { + OMAP2_SOC_OMAP2420, + OMAP2_SOC_OMAP2430, +}; + +static int __init omap2xxx_dt_clk_init(int soc_type) +{ + ti_dt_clocks_register(omap2xxx_clks); + + if (soc_type == OMAP2_SOC_OMAP2420) + ti_dt_clocks_register(omap2420_clks); + else + ti_dt_clocks_register(omap2430_clks); + + omap2_clk_disable_autoidle_all(); + + omap2_clk_enable_init_clocks(enable_init_clks, + ARRAY_SIZE(enable_init_clks)); + + pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n", + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "sys_ck")) / 100000) % 10, + (clk_get_rate(clk_get_sys(NULL, "dpll_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "mpu_ck")) / 1000000)); + + return 0; +} + +int __init omap2420_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2420); +} + +int __init omap2430_dt_clk_init(void) +{ + return omap2xxx_dt_clk_init(OMAP2_SOC_OMAP2430); +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index a8390d4..188f0cb 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -302,6 +302,8 @@ int omap5xxx_dt_clk_init(void); int dra7xx_dt_clk_init(void); int am33xx_dt_clk_init(void); int am43xx_dt_clk_init(void); +int omap2420_dt_clk_init(void); +int omap2430_dt_clk_init(void); #ifdef CONFIG_OF void of_ti_clk_allow_autoidle_all(void); -- cgit v0.10.2 From 61f25ca76ccc7b63371a7a6b0b8b9a8a46745b79 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 18:49:35 +0200 Subject: ARM: OMAP2: clock: add DT boot support for cpufreq_ck The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index b935ed2..85e0b0c0 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -208,3 +208,56 @@ void omap2xxx_clkt_vps_late_init(void) clk_put(c); } } + +#ifdef CONFIG_OF +#include +#include + +static const struct clk_ops virt_prcm_set_ops = { + .recalc_rate = &omap2_table_mpu_recalc, + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +/** + * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock + * + * Does a manual init for the virtual prcm DVFS clock for OMAP2. This + * function is called only from omap2 DT clock init, as the virtual + * node is not modelled in the DT clock data. + */ +void omap2xxx_clkt_vps_init(void) +{ + struct clk_init_data init = { NULL }; + struct clk_hw_omap *hw = NULL; + struct clk *clk; + const char *parent_name = "mpu_ck"; + struct clk_lookup *lookup = NULL; + + omap2xxx_clkt_vps_late_init(); + omap2xxx_clkt_vps_check_bootloader_rates(); + + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + lookup = kzalloc(sizeof(*lookup), GFP_KERNEL); + if (!hw || !lookup) + goto cleanup; + init.name = "virt_prcm_set"; + init.ops = &virt_prcm_set_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + hw->hw.init = &init; + + clk = clk_register(NULL, &hw->hw); + + lookup->dev_id = NULL; + lookup->con_id = "cpufreq_ck"; + lookup->clk = clk; + + clkdev_add(lookup); + return; +cleanup: + kfree(hw); + kfree(lookup); +} +#endif diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c index f6400fb..c808ab3 100644 --- a/drivers/clk/ti/clk-2xxx.c +++ b/drivers/clk/ti/clk-2xxx.c @@ -229,6 +229,8 @@ static int __init omap2xxx_dt_clk_init(int soc_type) else ti_dt_clocks_register(omap2430_clks); + omap2xxx_clkt_vps_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 188f0cb..4231c41 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -283,6 +283,7 @@ unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); +void omap2xxx_clkt_vps_init(void); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); -- cgit v0.10.2 From b3654d703de2ddf5651d2fa959879d586e685376 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 5 Mar 2014 10:03:38 +0200 Subject: CLK: TI: gate: add composite interface clock to OMAP2 only build Composite interface clock is needed by OMAP2, but it was only built in for OMAP3. Fixed the conditional build flag checks for this. Signed-off-by: Tero Kristo diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c index 3e2999d..474c171 100644 --- a/drivers/clk/ti/gate.c +++ b/drivers/clk/ti/gate.c @@ -185,7 +185,7 @@ of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", of_ti_composite_no_wait_gate_clk_setup); -#ifdef CONFIG_ARCH_OMAP3 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static void __init of_ti_composite_interface_clk_setup(struct device_node *node) { _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); -- cgit v0.10.2 From 0cccd9190009aa6c037aa88a85f2a1b72a6a7963 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:45 +0300 Subject: ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock To allign the name with the other atl clock names: atlclkin3_ck -> atl_clkin3_ck Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc7..3016034 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -26,7 +26,7 @@ clock-frequency = <0>; }; - atlclkin3_ck: atlclkin3_ck { + atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -730,7 +730,7 @@ mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x0550>; }; @@ -738,7 +738,7 @@ mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x0550>; }; @@ -1631,7 +1631,7 @@ mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <28>; reg = <0x1860>; }; @@ -1639,7 +1639,7 @@ mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1860>; }; @@ -1655,7 +1655,7 @@ mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1868>; }; @@ -1671,7 +1671,7 @@ mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1898>; }; @@ -1687,7 +1687,7 @@ mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1878>; }; @@ -1703,7 +1703,7 @@ mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1904>; }; @@ -1719,7 +1719,7 @@ mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1908>; }; @@ -1735,7 +1735,7 @@ mcasp8_ahclk_mux: mcasp8_ahclk_mux { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; + clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <22>; reg = <0x1890>; }; diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index f7e4073..e158133 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -24,7 +24,7 @@ static struct ti_dt_clk dra7xx_clks[] = { DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"), DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"), DT_CLK(NULL, "atl_clkin2_ck", "atl_clkin2_ck"), - DT_CLK(NULL, "atlclkin3_ck", "atlclkin3_ck"), + DT_CLK(NULL, "atl_clkin3_ck", "atl_clkin3_ck"), DT_CLK(NULL, "hdmi_clkin_ck", "hdmi_clkin_ck"), DT_CLK(NULL, "mlb_clkin_ck", "mlb_clkin_ck"), DT_CLK(NULL, "mlbp_clkin_ck", "mlbp_clkin_ck"), -- cgit v0.10.2 From 2d5e447914722f3c79103ad54baa1170661ac553 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:46 +0300 Subject: dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt new file mode 100644 index 0000000..585e8c1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -0,0 +1,96 @@ +Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC. + +The ATL IP is used to generate clock to be used to synchronize baseband and +audio codec. A single ATL IP provides four ATL clock instances sharing the same +functional clock but can be configured to provide different clocks. +ATL can maintain a clock averages to some desired frequency based on the bws/aws +signals - can compensate the drift between the two ws signal. + +In order to provide the support for ATL and it's output clocks (which can be used +internally within the SoC or external components) two sets of bindings is needed: + +Clock tree binding: +This binding uses the common clock binding[1]. +To be able to integrate the ATL clocks with DT clock tree. +Provides ccf level representation of the ATL clocks to be used by drivers. +Since the clock instances are part of a single IP this binding is used as a node +for the DT clock tree, the IP driver is needed to handle the actual configuration +of the IP. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dra7-atl-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles to functional clock of ATL + +Binding for the IP driver: +This binding is used to configure the IP driver which is going to handle the +configuration of the IP for the ATL clock instances. + +Required properties: +- compatible : shall be "ti,dra7-atl" +- reg : base address for the ATL IP +- ti,provided-clocks : List of phandles to the clocks associated with the ATL +- clocks : link phandles to functional clock of ATL +- clock-names : Shall be set to "fck" +- ti,hwmods : Shall be set to "atl" + +Optional properties: +Configuration of ATL instances: +- atl{0/1/2/3} { + - bws : Baseband word select signal selection + - aws : Audio word select signal selection +}; + +For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include +file. + +Examples: +/* clock bindings for atl provided clocks */ +atl_clkin0_ck: atl_clkin0_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin1_ck: atl_clkin1_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin2_ck: atl_clkin2_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin3_ck: atl_clkin3_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +/* binding for the IP */ +atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; +}; + +#include + +&atl { + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; diff --git a/include/dt-bindings/clk/ti-dra7-atl.h b/include/dt-bindings/clk/ti-dra7-atl.h new file mode 100644 index 0000000..42dd416 --- /dev/null +++ b/include/dt-bindings/clk/ti-dra7-atl.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for DRA7 ATL (Audio Tracking Logic) + * + * The constants defined in this header are used in dts files + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_DRA7_ATL_H +#define _DT_BINDINGS_CLK_DRA7_ATL_H + +#define DRA7_ATL_WS_MCASP1_FSR 0 +#define DRA7_ATL_WS_MCASP1_FSX 1 +#define DRA7_ATL_WS_MCASP2_FSR 2 +#define DRA7_ATL_WS_MCASP2_FSX 3 +#define DRA7_ATL_WS_MCASP3_FSX 4 +#define DRA7_ATL_WS_MCASP4_FSX 5 +#define DRA7_ATL_WS_MCASP5_FSX 6 +#define DRA7_ATL_WS_MCASP6_FSX 7 +#define DRA7_ATL_WS_MCASP7_FSX 8 +#define DRA7_ATL_WS_MCASP8_FSX 9 +#define DRA7_ATL_WS_MCASP8_AHCLKX 10 +#define DRA7_ATL_WS_XREF_CLK3 11 +#define DRA7_ATL_WS_XREF_CLK0 12 +#define DRA7_ATL_WS_XREF_CLK1 13 +#define DRA7_ATL_WS_XREF_CLK2 14 +#define DRA7_ATL_WS_OSC1_X1 15 + +#endif -- cgit v0.10.2 From 9ac33b0ce81fa48dd39e7ddfc1bf4519052181dd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:47 +0300 Subject: CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4afeaed..ed4d0aa 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o clk-3xxx.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o -obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o +obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \ + clk-dra7-atl.o obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o endif diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c new file mode 100644 index 0000000..4a65b41 --- /dev/null +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -0,0 +1,312 @@ +/* + * DRA7 ATL (Audio Tracking Logic) clock driver + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRA7_ATL_INSTANCES 4 + +#define DRA7_ATL_PPMR_REG(id) (0x200 + (id * 0x80)) +#define DRA7_ATL_BBSR_REG(id) (0x204 + (id * 0x80)) +#define DRA7_ATL_ATLCR_REG(id) (0x208 + (id * 0x80)) +#define DRA7_ATL_SWEN_REG(id) (0x210 + (id * 0x80)) +#define DRA7_ATL_BWSMUX_REG(id) (0x214 + (id * 0x80)) +#define DRA7_ATL_AWSMUX_REG(id) (0x218 + (id * 0x80)) +#define DRA7_ATL_PCLKMUX_REG(id) (0x21c + (id * 0x80)) + +#define DRA7_ATL_SWEN BIT(0) +#define DRA7_ATL_DIVIDER_MASK (0x1f) +#define DRA7_ATL_PCLKMUX BIT(0) +struct dra7_atl_clock_info; + +struct dra7_atl_desc { + struct clk *clk; + struct clk_hw hw; + struct dra7_atl_clock_info *cinfo; + int id; + + bool probed; /* the driver for the IP has been loaded */ + bool valid; /* configured */ + bool enabled; + u32 bws; /* Baseband Word Select Mux */ + u32 aws; /* Audio Word Select Mux */ + u32 divider; /* Cached divider value */ +}; + +struct dra7_atl_clock_info { + struct device *dev; + void __iomem *iobase; + + struct dra7_atl_desc *cdesc; +}; + +#define to_atl_desc(_hw) container_of(_hw, struct dra7_atl_desc, hw) + +static inline void atl_write(struct dra7_atl_clock_info *cinfo, u32 reg, + u32 val) +{ + __raw_writel(val, cinfo->iobase + reg); +} + +static inline int atl_read(struct dra7_atl_clock_info *cinfo, u32 reg) +{ + return __raw_readl(cinfo->iobase + reg); +} + +static int atl_clk_enable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + if (unlikely(!cdesc->valid)) + dev_warn(cdesc->cinfo->dev, "atl%d has not been configured\n", + cdesc->id); + pm_runtime_get_sync(cdesc->cinfo->dev); + + atl_write(cdesc->cinfo, DRA7_ATL_ATLCR_REG(cdesc->id), + cdesc->divider - 1); + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), DRA7_ATL_SWEN); + +out: + cdesc->enabled = true; + + return 0; +} + +static void atl_clk_disable(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + if (!cdesc->probed) + goto out; + + atl_write(cdesc->cinfo, DRA7_ATL_SWEN_REG(cdesc->id), 0); + pm_runtime_put_sync(cdesc->cinfo->dev); + +out: + cdesc->enabled = false; +} + +static int atl_clk_is_enabled(struct clk_hw *hw) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return cdesc->enabled; +} + +static unsigned long atl_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + + return parent_rate / cdesc->divider; +} + +static long atl_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned divider; + + divider = (*parent_rate + rate / 2) / rate; + if (divider > DRA7_ATL_DIVIDER_MASK + 1) + divider = DRA7_ATL_DIVIDER_MASK + 1; + + return *parent_rate / divider; +} + +static int atl_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct dra7_atl_desc *cdesc = to_atl_desc(hw); + u32 divider; + + divider = ((parent_rate + rate / 2) / rate) - 1; + if (divider > DRA7_ATL_DIVIDER_MASK) + divider = DRA7_ATL_DIVIDER_MASK; + + cdesc->divider = divider + 1; + + return 0; +} + +const struct clk_ops atl_clk_ops = { + .enable = atl_clk_enable, + .disable = atl_clk_disable, + .is_enabled = atl_clk_is_enabled, + .recalc_rate = atl_clk_recalc_rate, + .round_rate = atl_clk_round_rate, + .set_rate = atl_clk_set_rate, +}; + +static void __init of_dra7_atl_clock_setup(struct device_node *node) +{ + struct dra7_atl_desc *clk_hw = NULL; + struct clk_init_data init = { 0 }; + const char **parent_names = NULL; + struct clk *clk; + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) { + pr_err("%s: could not allocate dra7_atl_desc\n", __func__); + return; + } + + clk_hw->hw.init = &init; + clk_hw->divider = 1; + init.name = node->name; + init.ops = &atl_clk_ops; + init.flags = CLK_IGNORE_UNUSED; + init.num_parents = of_clk_get_parent_count(node); + + if (init.num_parents != 1) { + pr_err("%s: atl clock %s must have 1 parent\n", __func__, + node->name); + goto cleanup; + } + + parent_names = kzalloc(sizeof(char *), GFP_KERNEL); + + if (!parent_names) + goto cleanup; + + parent_names[0] = of_clk_get_parent_name(node, 0); + + init.parent_names = parent_names; + + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } +cleanup: + kfree(parent_names); + kfree(clk_hw); +} +CLK_OF_DECLARE(dra7_atl_clock, "ti,dra7-atl-clock", of_dra7_atl_clock_setup); + +static int of_dra7_atl_clk_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct dra7_atl_clock_info *cinfo; + int i; + int ret = 0; + + if (!node) + return -ENODEV; + + cinfo = devm_kzalloc(&pdev->dev, sizeof(*cinfo), GFP_KERNEL); + if (!cinfo) + return -ENOMEM; + + cinfo->iobase = of_iomap(node, 0); + cinfo->dev = &pdev->dev; + pm_runtime_enable(cinfo->dev); + + pm_runtime_get_sync(cinfo->dev); + atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX); + + for (i = 0; i < DRA7_ATL_INSTANCES; i++) { + struct device_node *cfg_node; + char prop[5]; + struct dra7_atl_desc *cdesc; + struct of_phandle_args clkspec; + struct clk *clk; + int rc; + + rc = of_parse_phandle_with_args(node, "ti,provided-clocks", + NULL, i, &clkspec); + + if (rc) { + pr_err("%s: failed to lookup atl clock %d\n", __func__, + i); + return -EINVAL; + } + + clk = of_clk_get_from_provider(&clkspec); + + cdesc = to_atl_desc(__clk_get_hw(clk)); + cdesc->cinfo = cinfo; + cdesc->id = i; + + /* Get configuration for the ATL instances */ + snprintf(prop, sizeof(prop), "atl%u", i); + cfg_node = of_find_node_by_name(node, prop); + if (cfg_node) { + ret = of_property_read_u32(cfg_node, "bws", + &cdesc->bws); + ret |= of_property_read_u32(cfg_node, "aws", + &cdesc->aws); + if (!ret) { + cdesc->valid = true; + atl_write(cinfo, DRA7_ATL_BWSMUX_REG(i), + cdesc->bws); + atl_write(cinfo, DRA7_ATL_AWSMUX_REG(i), + cdesc->aws); + } + } + + cdesc->probed = true; + /* + * Enable the clock if it has been asked prior to loading the + * hw driver + */ + if (cdesc->enabled) + atl_clk_enable(__clk_get_hw(clk)); + } + pm_runtime_put_sync(cinfo->dev); + + return ret; +} + +static int of_dra7_atl_clk_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static struct of_device_id of_dra7_atl_clk_match_tbl[] = { + { .compatible = "ti,dra7-atl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_dra7_atl_clk_match_tbl); + +static struct platform_driver dra7_atl_clk_driver = { + .driver = { + .name = "dra7-atl", + .owner = THIS_MODULE, + .of_match_table = of_dra7_atl_clk_match_tbl, + }, + .probe = of_dra7_atl_clk_probe, + .remove = of_dra7_atl_clk_remove, +}; + +module_platform_driver(dra7_atl_clk_driver); + +MODULE_DESCRIPTION("Clock driver for DRA7 Audio Tracking Logic"); +MODULE_ALIAS("platform:dra7-atl-clock"); +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 81c7e03acbcb68274be770134f8f04f270ffa859 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 30 Apr 2014 14:39:37 +0300 Subject: CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck In order to get correct clock dividers for AESS/ABE we need to set the dpll_abe_m2x2_ck rate to be double of dpll_abe_ck. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 08f3d1b..5e18399 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -240,6 +240,12 @@ int __init omap5xxx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + abe_dpll = clk_get_sys(NULL, "dpll_abe_m2x2_ck"); + if (!rc) + rc = clk_set_rate(abe_dpll, OMAP5_DPLL_ABE_DEFFREQ * 2); + if (rc) + pr_err("%s: failed to configure ABE m2x2 DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); if (rc) -- cgit v0.10.2 From ce369a545aac3da653dd95d8117093a862bf94d3 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Fri, 16 May 2014 05:45:58 -0500 Subject: ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) Duty Cycle Correction(DCC) needs to be enabled if the MPU is to run at frequencies beyond 1.4GHz for OMAP5, DRA75x, DRA72x. MPU DPLL has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). For further information, See the note on OMAP5432 Technical Reference Manual(SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and also the "OMAP543x ES2.0 DM Operating Conditions Addendum v0.5" chapter 2.1 "Micro Processor Unit (MPU)". Equivalent information is present in relevant DRA75x, 72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Andrii Tseglytskyi Signed-off-by: Taras Kondratiuk Signed-off-by: J Keerthy Signed-off-by: Nishanth Menon [t-kristo@ti.com: added TRM / DM references for DCC clock rate] Signed-off-by: Tero Kristo diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index fcd8036..6d7ba37 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -319,6 +319,15 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) /* Set DPLL multiplier, divider */ v = omap2_clk_readl(clk, dd->mult_div1_reg); + + /* Handle Duty Cycle Correction */ + if (dd->dcc_mask) { + if (dd->last_rounded_rate >= dd->dcc_rate) + v |= dd->dcc_mask; /* Enable DCC */ + else + v &= ~dd->dcc_mask; /* Disable DCC */ + } + v &= ~(dd->mult_mask | dd->div1_mask); v |= dd->last_rounded_m << __ffs(dd->mult_mask); v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 4231c41..e8d8a35 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -41,6 +41,8 @@ * @idlest_reg: register containing the DPLL idle status bitfield * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg + * @dcc_rate: rate atleast which DCC @dcc_mask must be set * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg @@ -86,6 +88,8 @@ struct dpll_data { u32 idlest_mask; u32 dco_mask; u32 sddiv_mask; + u32 dcc_mask; + unsigned long dcc_rate; u32 lpmode_mask; u32 m4xen_mask; u8 auto_recal_bit; -- cgit v0.10.2 From b4be018921879ba7452379af8fb7320833a12bd4 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 05:45:59 -0500 Subject: CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 50a1a42..df57009 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -24,6 +24,7 @@ Required properties: "ti,omap4-dpll-core-clock", "ti,omap4-dpll-m4xen-clock", "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", "ti,am3-dpll-no-gate-clock", "ti,am3-dpll-j-type-clock", "ti,am3-dpll-no-gate-j-type-clock", diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 34e2339..abd956d 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -433,6 +433,27 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) { const struct dpll_data dd = { -- cgit v0.10.2 From 7e148070001ae82df08966199580a29b934e3bf3 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 05:46:00 -0500 Subject: ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies OMAP5432, DRA75x and DRA72x have MPU DPLLs that need Duty Cycle Correction(DCC) to operate safely at frequencies >= 1.4GHz. Switch to "ti,omap5-mpu-dpll-clock" compatible property which provides this support. Signed-off-by: Nishanth Menon Signed-off-by: Tero Kristo diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 3016034..264b9ca 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -277,7 +277,7 @@ dpll_mpu_ck: dpll_mpu_ck { #clock-cells = <0>; - compatible = "ti,omap4-dpll-clock"; + compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index d487fda..465505c 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -362,7 +362,7 @@ dpll_mpu_ck: dpll_mpu_ck { #clock-cells = <0>; - compatible = "ti,omap4-dpll-clock"; + compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; -- cgit v0.10.2 From e0e7943c55984e7dbae3d7d4c65f6b7ca2e61b81 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 13 May 2014 17:44:15 +0200 Subject: clk: sunxi: Implement A31 USB clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The A31 USB clock slightly differ from its older counterparts, mostly because it has a different gate for each PHY, while the older one had a single gate for all the phy. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 4264834..bf5075e 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1009,6 +1009,11 @@ static const struct gates_data sun5i_a13_usb_gates_data __initconst = { .reset_mask = 0x03, }; +static const struct gates_data sun6i_a31_usb_gates_data __initconst = { + .mask = { BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8) }, + .reset_mask = BIT(2) | BIT(1) | BIT(0), +}; + static void __init sunxi_gates_clk_setup(struct device_node *node, struct gates_data *data) { @@ -1304,6 +1309,7 @@ static const struct of_device_id clk_gates_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,}, {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,}, {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,}, + {.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,}, {} }; -- cgit v0.10.2 From 6d1d14d5ce3e7880f91e7cfbdeca88128fe741ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Tue, 13 May 2014 13:29:26 -0300 Subject: clk: sunxi: document new A31 USB clock compatible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Support for the USB gates and resets on A31 has been recently added using a new compatible, so let's document it here. Signed-off-by: Emilio López diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index a5160d8..1f6d3f4 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -41,6 +41,7 @@ Required properties: "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 + "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 Required properties for all clocks: - reg : shall be the control register address for the clock. -- cgit v0.10.2 From 2c6fba1038f2b27fffe7ab0ddd42f9f283128105 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:36 -0500 Subject: clk: sunxi: Remove calls to clk_put MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Callers of clk_put must disable the clock first. This also means that as long as the clock is enabled the driver should hold a reference to that clock. Hence, the call to clk_put here are bogus and should be removed. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index bf5075e..9bfa21a 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1339,17 +1339,13 @@ static void __init sunxi_clock_protect(void) /* memory bus clock - sun5i+ */ clk = clk_get(NULL, "mbus"); - if (!IS_ERR(clk)) { + if (!IS_ERR(clk)) clk_prepare_enable(clk); - clk_put(clk); - } /* DDR clock - sun4i+ */ clk = clk_get(NULL, "pll5_ddr"); - if (!IS_ERR(clk)) { + if (!IS_ERR(clk)) clk_prepare_enable(clk); - clk_put(clk); - } } static void __init sunxi_init_clocks(struct device_node *np) -- cgit v0.10.2 From ff01df28e558c194836121c6d45954eaa4bcf93d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:37 -0500 Subject: clk: sunxi: Move the 24M oscillator to a file of its own MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The main oscillator is pretty easy to deal with, since it's pretty much isolated. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index b5bac91..2c3d2fe 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -3,3 +3,4 @@ # obj-y += clk-sunxi.o clk-factors.o +obj-y += clk-a10-hosc.o \ No newline at end of file diff --git a/drivers/clk/sunxi/clk-a10-hosc.c b/drivers/clk/sunxi/clk-a10-hosc.c new file mode 100644 index 0000000..0481d5d --- /dev/null +++ b/drivers/clk/sunxi/clk-a10-hosc.c @@ -0,0 +1,73 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#define SUNXI_OSC24M_GATE 0 + +static DEFINE_SPINLOCK(hosc_lock); + +static void __init sun4i_osc_clk_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_fixed_rate *fixed; + struct clk_gate *gate; + const char *clk_name = node->name; + u32 rate; + + if (of_property_read_u32(node, "clock-frequency", &rate)) + return; + + /* allocate fixed-rate and gate clock structs */ + fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); + if (!fixed) + return; + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) + goto err_free_fixed; + + of_property_read_string(node, "clock-output-names", &clk_name); + + /* set up gate and fixed rate properties */ + gate->reg = of_iomap(node, 0); + gate->bit_idx = SUNXI_OSC24M_GATE; + gate->lock = &hosc_lock; + fixed->fixed_rate = rate; + + clk = clk_register_composite(NULL, clk_name, + NULL, 0, + NULL, NULL, + &fixed->hw, &clk_fixed_rate_ops, + &gate->hw, &clk_gate_ops, + CLK_IS_ROOT); + + if (IS_ERR(clk)) + goto err_free_gate; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + + return; + +err_free_gate: + kfree(gate); +err_free_fixed: + kfree(fixed); +} +CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 9bfa21a..4a8294d 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -28,63 +28,6 @@ static DEFINE_SPINLOCK(clk_lock); #define SUNXI_MAX_PARENTS 5 /** - * sun4i_osc_clk_setup() - Setup function for gatable oscillator - */ - -#define SUNXI_OSC24M_GATE 0 - -static void __init sun4i_osc_clk_setup(struct device_node *node) -{ - struct clk *clk; - struct clk_fixed_rate *fixed; - struct clk_gate *gate; - const char *clk_name = node->name; - u32 rate; - - if (of_property_read_u32(node, "clock-frequency", &rate)) - return; - - /* allocate fixed-rate and gate clock structs */ - fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); - if (!fixed) - return; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) - goto err_free_fixed; - - of_property_read_string(node, "clock-output-names", &clk_name); - - /* set up gate and fixed rate properties */ - gate->reg = of_iomap(node, 0); - gate->bit_idx = SUNXI_OSC24M_GATE; - gate->lock = &clk_lock; - fixed->fixed_rate = rate; - - clk = clk_register_composite(NULL, clk_name, - NULL, 0, - NULL, NULL, - &fixed->hw, &clk_fixed_rate_ops, - &gate->hw, &clk_gate_ops, - CLK_IS_ROOT); - - if (IS_ERR(clk)) - goto err_free_gate; - - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - - return; - -err_free_gate: - kfree(gate); -err_free_fixed: - kfree(fixed); -} -CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup); - - - -/** * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1 * PLL1 rate is calculated as follows * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); -- cgit v0.10.2 From 59cb10e32a60533865e26dc9a8303306ba972a70 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:38 -0500 Subject: clk: sunxi: Move the GMAC clock to a file of its own MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The gmac clock is pretty easy to deal with, since it's pretty much isolated and doesn't have any dependency on the other clocks. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 2c3d2fe..839029e 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -3,4 +3,5 @@ # obj-y += clk-sunxi.o clk-factors.o -obj-y += clk-a10-hosc.o \ No newline at end of file +obj-y += clk-a10-hosc.o +obj-y += clk-a20-gmac.o diff --git a/drivers/clk/sunxi/clk-a20-gmac.c b/drivers/clk/sunxi/clk-a20-gmac.c new file mode 100644 index 0000000..633ddc4 --- /dev/null +++ b/drivers/clk/sunxi/clk-a20-gmac.c @@ -0,0 +1,119 @@ +/* + * Copyright 2013 Emilio López + * Emilio López + * + * Copyright 2013 Chen-Yu Tsai + * Chen-Yu Tsai + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(gmac_lock); + +/** + * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module + * + * This clock looks something like this + * ________________________ + * MII TX clock from PHY >-----|___________ _________|----> to GMAC core + * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY + * Ext. 125MHz RGMII TX clk >--|__divider__/ | + * |________________________| + * + * The external 125 MHz reference is optional, i.e. GMAC can use its + * internal TX clock just fine. The A31 GMAC clock module does not have + * the divider controls for the external reference. + * + * To keep it simple, let the GMAC use either the MII TX clock for MII mode, + * and its internal TX clock for GMII and RGMII modes. The GMAC driver should + * select the appropriate source and gate/ungate the output to the PHY. + * + * Only the GMAC should use this clock. Altering the clock so that it doesn't + * match the GMAC's operation parameters will result in the GMAC not being + * able to send traffic out. The GMAC driver should set the clock rate and + * enable/disable this clock to configure the required state. The clock + * driver then responds by auto-reparenting the clock. + */ + +#define SUN7I_A20_GMAC_GPIT 2 +#define SUN7I_A20_GMAC_MASK 0x3 +#define SUN7I_A20_GMAC_PARENTS 2 + +static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_mux *mux; + struct clk_gate *gate; + const char *clk_name = node->name; + const char *parents[SUN7I_A20_GMAC_PARENTS]; + void *reg; + + if (of_property_read_string(node, "clock-output-names", &clk_name)) + return; + + /* allocate mux and gate clock structs */ + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) + return; + + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) + goto free_mux; + + /* gmac clock requires exactly 2 parents */ + parents[0] = of_clk_get_parent_name(node, 0); + parents[1] = of_clk_get_parent_name(node, 1); + if (!parents[0] || !parents[1]) + goto free_gate; + + reg = of_iomap(node, 0); + if (!reg) + goto free_gate; + + /* set up gate and fixed rate properties */ + gate->reg = reg; + gate->bit_idx = SUN7I_A20_GMAC_GPIT; + gate->lock = &gmac_lock; + mux->reg = reg; + mux->mask = SUN7I_A20_GMAC_MASK; + mux->flags = CLK_MUX_INDEX_BIT; + mux->lock = &gmac_lock; + + clk = clk_register_composite(NULL, clk_name, + parents, SUN7I_A20_GMAC_PARENTS, + &mux->hw, &clk_mux_ops, + NULL, NULL, + &gate->hw, &clk_gate_ops, + 0); + + if (IS_ERR(clk)) + goto iounmap_reg; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + + return; + +iounmap_reg: + iounmap(reg); +free_gate: + kfree(gate); +free_mux: + kfree(mux); +} +CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", + sun7i_a20_gmac_clk_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 4a8294d..8800950 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -351,104 +351,6 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, *p = calcp; } - - -/** - * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module - * - * This clock looks something like this - * ________________________ - * MII TX clock from PHY >-----|___________ _________|----> to GMAC core - * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY - * Ext. 125MHz RGMII TX clk >--|__divider__/ | - * |________________________| - * - * The external 125 MHz reference is optional, i.e. GMAC can use its - * internal TX clock just fine. The A31 GMAC clock module does not have - * the divider controls for the external reference. - * - * To keep it simple, let the GMAC use either the MII TX clock for MII mode, - * and its internal TX clock for GMII and RGMII modes. The GMAC driver should - * select the appropriate source and gate/ungate the output to the PHY. - * - * Only the GMAC should use this clock. Altering the clock so that it doesn't - * match the GMAC's operation parameters will result in the GMAC not being - * able to send traffic out. The GMAC driver should set the clock rate and - * enable/disable this clock to configure the required state. The clock - * driver then responds by auto-reparenting the clock. - */ - -#define SUN7I_A20_GMAC_GPIT 2 -#define SUN7I_A20_GMAC_MASK 0x3 -#define SUN7I_A20_GMAC_PARENTS 2 - -static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) -{ - struct clk *clk; - struct clk_mux *mux; - struct clk_gate *gate; - const char *clk_name = node->name; - const char *parents[SUN7I_A20_GMAC_PARENTS]; - void *reg; - - if (of_property_read_string(node, "clock-output-names", &clk_name)) - return; - - /* allocate mux and gate clock structs */ - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) - return; - - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) - goto free_mux; - - /* gmac clock requires exactly 2 parents */ - parents[0] = of_clk_get_parent_name(node, 0); - parents[1] = of_clk_get_parent_name(node, 1); - if (!parents[0] || !parents[1]) - goto free_gate; - - reg = of_iomap(node, 0); - if (!reg) - goto free_gate; - - /* set up gate and fixed rate properties */ - gate->reg = reg; - gate->bit_idx = SUN7I_A20_GMAC_GPIT; - gate->lock = &clk_lock; - mux->reg = reg; - mux->mask = SUN7I_A20_GMAC_MASK; - mux->flags = CLK_MUX_INDEX_BIT; - mux->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, SUN7I_A20_GMAC_PARENTS, - &mux->hw, &clk_mux_ops, - NULL, NULL, - &gate->hw, &clk_gate_ops, - 0); - - if (IS_ERR(clk)) - goto iounmap_reg; - - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - - return; - -iounmap_reg: - iounmap(reg); -free_gate: - kfree(gate); -free_mux: - kfree(mux); -} -CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", - sun7i_a20_gmac_clk_setup); - - - /** * clk_sunxi_mmc_phase_control() - configures MMC clock phase control */ -- cgit v0.10.2 From 134a6690a3caf6d52d0bc1b643650c6051c791d2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:39 -0500 Subject: clk: sunxi: Rework clock protection code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since we start to have a lot of clocks to protect, some of them in a few SoCs only, it becomes difficult to handle the clock protection without having to add per machine exceptions. Add per-SoC data to tell which clock to leave enabled. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 8800950..4e8ff45 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1172,29 +1172,10 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat } } -/** - * System clock protection - * - * By enabling these critical clocks, we prevent their accidental gating - * by the framework - */ -static void __init sunxi_clock_protect(void) +static void __init sunxi_init_clocks(const char *clocks[], int nclocks) { - struct clk *clk; - - /* memory bus clock - sun5i+ */ - clk = clk_get(NULL, "mbus"); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - /* DDR clock - sun4i+ */ - clk = clk_get(NULL, "pll5_ddr"); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} + unsigned int i; -static void __init sunxi_init_clocks(struct device_node *np) -{ /* Register factor clocks */ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); @@ -1210,11 +1191,46 @@ static void __init sunxi_init_clocks(struct device_node *np) /* Register gate clocks */ of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); - /* Enable core system clocks */ - sunxi_clock_protect(); + /* Protect the clocks that needs to stay on */ + for (i = 0; i < nclocks; i++) { + struct clk *clk = clk_get(NULL, clocks[i]); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); + } +} + +static const char *sun4i_a10_critical_clocks[] __initdata = { + "pll5_ddr", +}; + +static void __init sun4i_a10_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun4i_a10_critical_clocks, + ARRAY_SIZE(sun4i_a10_critical_clocks)); +} +CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); + +static const char *sun5i_critical_clocks[] __initdata = { + "mbus", + "pll5_ddr", +}; + +static void __init sun5i_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun5i_critical_clocks, + ARRAY_SIZE(sun5i_critical_clocks)); +} +CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks); +CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks); +CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks); + +static const char *sun6i_critical_clocks[] __initdata = { +}; + +static void __init sun6i_init_clocks(struct device_node *node) +{ + sunxi_init_clocks(sun6i_critical_clocks, + ARRAY_SIZE(sun6i_critical_clocks)); } -CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); -CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); -CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks); -CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks); -CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks); +CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks); -- cgit v0.10.2 From 2df73f40dc5af46eabcc3f144d19842cd69361cd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:40 -0500 Subject: clk: sun6i: Protect CPU clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Right now, AHB is an indirect child clock of the CPU clock. If that happens to change, since the CPU clock has no other consumers declared in Linux, it would be shut down, which is not really a good idea. Prevent this by forcing it enabled. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 4e8ff45..f76f232 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1226,6 +1226,7 @@ CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks); CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks); static const char *sun6i_critical_clocks[] __initdata = { + "cpu", }; static void __init sun6i_init_clocks(struct device_node *node) -- cgit v0.10.2 From efb3184c08927c54ed984c85f69f54ff1dbd2c37 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 9 May 2014 22:33:41 -0500 Subject: clk: sun6i: Protect SDRAM gating bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prevent the SDRAM controller from being gated by force-enabling it in the machine code. Signed-off-by: Maxime Ripard Acked-by: Mike Turquette Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index f76f232..fb2ce84 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -1227,6 +1227,7 @@ CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks); static const char *sun6i_critical_clocks[] __initdata = { "cpu", + "ahb1_sdram", }; static void __init sun6i_init_clocks(struct device_node *node) -- cgit v0.10.2 From c8a76cac19eebf65f629e3676e57743f9dfeea8f Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 15 May 2014 10:55:11 +0200 Subject: clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PRCM (Power/Reset/Clock Management) unit provides several clock devices: - AR100 clk: used to clock the Power Management co-processor - AHB0 clk: used to clock the AHB0 bus - APB0 clk and gates: used to clk peripherals connected to the APB0 bus Add support for these clks in a separate driver so that they can be probed as platform devices instead of registered during early init. This is needed to be able to probe PRCM MFD subdevices. Signed-off-by: Boris BREZILLON Acked-by: Maxime Ripard Signed-off-by: Emilio López diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 839029e..762fd64 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -5,3 +5,5 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o + +obj-$(CONFIG_MFD_SUN6I_PRCM) += clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c new file mode 100644 index 0000000..44cd27c --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON + * + * Allwinner A31 APB0 clock gates driver + * + */ + +#include +#include +#include +#include + +#define SUN6I_APB0_GATES_MAX_SIZE 32 + +static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct clk_onecell_data *clk_data; + const char *clk_parent; + const char *clk_name; + struct resource *r; + void __iomem *reg; + int gate_id; + int ngates; + int i; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, r); + if (!reg) + return PTR_ERR(reg); + + clk_parent = of_clk_get_parent_name(np, 0); + if (!clk_parent) + return -EINVAL; + + ngates = of_property_count_strings(np, "clock-output-names"); + if (ngates < 0) + return ngates; + + if (!ngates || ngates > SUN6I_APB0_GATES_MAX_SIZE) + return -EINVAL; + + clk_data = devm_kzalloc(&pdev->dev, sizeof(struct clk_onecell_data), + GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + clk_data->clks = devm_kzalloc(&pdev->dev, + SUN6I_APB0_GATES_MAX_SIZE * + sizeof(struct clk *), + GFP_KERNEL); + if (!clk_data->clks) + return -ENOMEM; + + for (i = 0; i < ngates; i++) { + of_property_read_string_index(np, "clock-output-names", + i, &clk_name); + + gate_id = i; + of_property_read_u32_index(np, "clock-indices", i, &gate_id); + + WARN_ON(gate_id >= SUN6I_APB0_GATES_MAX_SIZE); + if (gate_id >= SUN6I_APB0_GATES_MAX_SIZE) + continue; + + clk_data->clks[gate_id] = clk_register_gate(&pdev->dev, + clk_name, + clk_parent, 0, + reg, gate_id, + 0, NULL); + WARN_ON(IS_ERR(clk_data->clks[gate_id])); + } + + clk_data->clk_num = ngates; + + return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); +} + +const struct of_device_id sun6i_a31_apb0_gates_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-apb0-gates-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_apb0_gates_clk_driver = { + .driver = { + .name = "sun6i-a31-apb0-gates-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids, + }, + .probe = sun6i_a31_apb0_gates_clk_probe, +}; +module_platform_driver(sun6i_a31_apb0_gates_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON "); +MODULE_DESCRIPTION("Allwinner A31 APB0 gate clocks driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c new file mode 100644 index 0000000..11f17c3 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-apb0.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON + * + * Allwinner A31 APB0 clock driver + * + */ + +#include +#include +#include +#include + +/* + * The APB0 clk has a configurable divisor. + * + * We must use a clk_div_table and not a regular power of 2 + * divisor here, because the first 2 values divide the clock + * by 2. + */ +static const struct clk_div_table sun6i_a31_apb0_divs[] = { + { .val = 0, .div = 2, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 4, }, + { .val = 3, .div = 8, }, + { /* sentinel */ }, +}; + +static int sun6i_a31_apb0_clk_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const char *clk_name = np->name; + const char *clk_parent; + struct resource *r; + void __iomem *reg; + struct clk *clk; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + clk_parent = of_clk_get_parent_name(np, 0); + if (!clk_parent) + return -EINVAL; + + of_property_read_string(np, "clock-output-names", &clk_name); + + clk = clk_register_divider_table(&pdev->dev, clk_name, clk_parent, + 0, reg, 0, 2, 0, sun6i_a31_apb0_divs, + NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-apb0-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_apb0_clk_driver = { + .driver = { + .name = "sun6i-a31-apb0-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_apb0_clk_dt_ids, + }, + .probe = sun6i_a31_apb0_clk_probe, +}; +module_platform_driver(sun6i_a31_apb0_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON "); +MODULE_DESCRIPTION("Allwinner A31 APB0 clock Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c new file mode 100644 index 0000000..f73cc05 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c @@ -0,0 +1,233 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * License Terms: GNU General Public License v2 + * Author: Boris BREZILLON + * + * Allwinner A31 AR100 clock driver + * + */ + +#include +#include +#include +#include + +#define SUN6I_AR100_MAX_PARENTS 4 +#define SUN6I_AR100_SHIFT_MASK 0x3 +#define SUN6I_AR100_SHIFT_MAX SUN6I_AR100_SHIFT_MASK +#define SUN6I_AR100_SHIFT_SHIFT 4 +#define SUN6I_AR100_DIV_MASK 0x1f +#define SUN6I_AR100_DIV_MAX (SUN6I_AR100_DIV_MASK + 1) +#define SUN6I_AR100_DIV_SHIFT 8 +#define SUN6I_AR100_MUX_MASK 0x3 +#define SUN6I_AR100_MUX_SHIFT 16 + +struct ar100_clk { + struct clk_hw hw; + void __iomem *reg; +}; + +static inline struct ar100_clk *to_ar100_clk(struct clk_hw *hw) +{ + return container_of(hw, struct ar100_clk, hw); +} + +static unsigned long ar100_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + int shift = (val >> SUN6I_AR100_SHIFT_SHIFT) & SUN6I_AR100_SHIFT_MASK; + int div = (val >> SUN6I_AR100_DIV_SHIFT) & SUN6I_AR100_DIV_MASK; + + return (parent_rate >> shift) / (div + 1); +} + +static long ar100_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) +{ + int nparents = __clk_get_num_parents(hw->clk); + long best_rate = -EINVAL; + int i; + + *best_parent_clk = NULL; + + for (i = 0; i < nparents; i++) { + unsigned long parent_rate; + unsigned long tmp_rate; + struct clk *parent; + unsigned long div; + int shift; + + parent = clk_get_parent_by_index(hw->clk, i); + parent_rate = __clk_get_rate(parent); + div = DIV_ROUND_UP(parent_rate, rate); + + /* + * The AR100 clk contains 2 divisors: + * - one power of 2 divisor + * - one regular divisor + * + * First check if we can safely shift (or divide by a power + * of 2) without losing precision on the requested rate. + */ + shift = ffs(div) - 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + shift = SUN6I_AR100_SHIFT_MAX; + + div >>= shift; + + /* + * Then if the divisor is still bigger than what the HW + * actually supports, use a bigger shift (or power of 2 + * divider) value and accept to lose some precision. + */ + while (div > SUN6I_AR100_DIV_MAX) { + shift++; + div >>= 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + break; + } + + /* + * If the shift value (or power of 2 divider) is bigger + * than what the HW actually support, skip this parent. + */ + if (shift > SUN6I_AR100_SHIFT_MAX) + continue; + + tmp_rate = (parent_rate >> shift) / div; + if (!*best_parent_clk || tmp_rate > best_rate) { + *best_parent_clk = parent; + *best_parent_rate = parent_rate; + best_rate = tmp_rate; + } + } + + return best_rate; +} + +static int ar100_set_parent(struct clk_hw *hw, u8 index) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + + if (index >= SUN6I_AR100_MAX_PARENTS) + return -EINVAL; + + val &= ~(SUN6I_AR100_MUX_MASK << SUN6I_AR100_MUX_SHIFT); + val |= (index << SUN6I_AR100_MUX_SHIFT); + writel(val, clk->reg); + + return 0; +} + +static u8 ar100_get_parent(struct clk_hw *hw) +{ + struct ar100_clk *clk = to_ar100_clk(hw); + return (readl(clk->reg) >> SUN6I_AR100_MUX_SHIFT) & + SUN6I_AR100_MUX_MASK; +} + +static int ar100_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + unsigned long div = parent_rate / rate; + struct ar100_clk *clk = to_ar100_clk(hw); + u32 val = readl(clk->reg); + int shift; + + if (parent_rate % rate) + return -EINVAL; + + shift = ffs(div) - 1; + if (shift > SUN6I_AR100_SHIFT_MAX) + shift = SUN6I_AR100_SHIFT_MAX; + + div >>= shift; + + if (div > SUN6I_AR100_DIV_MAX) + return -EINVAL; + + val &= ~((SUN6I_AR100_SHIFT_MASK << SUN6I_AR100_SHIFT_SHIFT) | + (SUN6I_AR100_DIV_MASK << SUN6I_AR100_DIV_SHIFT)); + val |= (shift << SUN6I_AR100_SHIFT_SHIFT) | + (div << SUN6I_AR100_DIV_SHIFT); + writel(val, clk->reg); + + return 0; +} + +struct clk_ops ar100_ops = { + .recalc_rate = ar100_recalc_rate, + .determine_rate = ar100_determine_rate, + .set_parent = ar100_set_parent, + .get_parent = ar100_get_parent, + .set_rate = ar100_set_rate, +}; + +static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev) +{ + const char *parents[SUN6I_AR100_MAX_PARENTS]; + struct device_node *np = pdev->dev.of_node; + const char *clk_name = np->name; + struct clk_init_data init; + struct ar100_clk *ar100; + struct resource *r; + struct clk *clk; + int nparents; + int i; + + ar100 = devm_kzalloc(&pdev->dev, sizeof(*ar100), GFP_KERNEL); + if (!ar100) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ar100->reg = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ar100->reg)) + return PTR_ERR(ar100->reg); + + nparents = of_clk_get_parent_count(np); + if (nparents > SUN6I_AR100_MAX_PARENTS) + nparents = SUN6I_AR100_MAX_PARENTS; + + for (i = 0; i < nparents; i++) + parents[i] = of_clk_get_parent_name(np, i); + + of_property_read_string(np, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = &ar100_ops; + init.parent_names = parents; + init.num_parents = nparents; + init.flags = 0; + + ar100->hw.init = &init; + + clk = clk_register(&pdev->dev, &ar100->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = { + { .compatible = "allwinner,sun6i-a31-ar100-clk" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_a31_ar100_clk_driver = { + .driver = { + .name = "sun6i-a31-ar100-clk", + .owner = THIS_MODULE, + .of_match_table = sun6i_a31_ar100_clk_dt_ids, + }, + .probe = sun6i_a31_ar100_clk_probe, +}; +module_platform_driver(sun6i_a31_ar100_clk_driver); + +MODULE_AUTHOR("Boris BREZILLON "); +MODULE_DESCRIPTION("Allwinner A31 AR100 clock Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 5c89a8b65760a60eea38e0b172d04152ec03a067 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 15 May 2014 10:55:12 +0200 Subject: clk: sunxi: document PRCM clock compatible strings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Document new compatible strings for clock provided by the PRCM (Power/Reset/Clock Management) unit. Signed-off-by: Boris BREZILLON Signed-off-by: Emilio López diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 1f6d3f4..b9ec668 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,12 +20,15 @@ Required properties: "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 + "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31 "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock + "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s + "allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31 "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing -- cgit v0.10.2