From 4711244c764da806fc9d14793c0664f3709ef17d Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 15 Dec 2011 15:46:47 +0100 Subject: arm/dts: twl6030: Add DTS file for twl6030 PMIC Add a dedicated DTS file for the twl6030 Power IC. This chip is a big SoC that will be reused in a lot of various OMAP4+ boards. Note: This file is supposed to be included in a board DTS that will create the twl node in order to allow the &twl reference to work. Exmaple: ... &i2c1 { twl: twl@48 { reg = <0x48>; interrupts = <0 7 4>; interrupt-controller; interrupt-parent = <&gic>; }; }; /include/ "twl6030.dtsi" ... Signed-off-by: Benoit Cousson Acked-by: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi new file mode 100644 index 0000000..b7b4e5e --- /dev/null +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ +&twl { + compatible = "ti,twl6030"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; +}; -- cgit v0.10.2 From dce90d596de288ebb9d2a4e01f996b599c3ed3ff Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 15 Dec 2011 15:47:41 +0100 Subject: arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC Add a dedicated DTS file for the twl4030/5030 Power + Audio IC. This chip is a big SoC that will be reused in a lot of various OMAP3 boards. Signed-off-by: Benoit Cousson Acked-by: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi new file mode 100644 index 0000000..8be5223 --- /dev/null +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + */ +&twl { + compatible = "ti,twl4030"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; +}; -- cgit v0.10.2 From 898ee397c31a4f057c2f3a200784d62bd64e83b0 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 17 Aug 2011 18:42:25 +0530 Subject: arm/dts: omap4-panda: Add twl6030 and i2c EEPROM Update pandaboard dts file with required clock frequencies for the i2c client devices existing on pandaboard. Add the twl6030 node in i2c1 controller. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add a generic i2c EEPROM entry. Signed-off-by: Benoit Cousson Acked-by: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9755ad5..29646dc 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -18,3 +18,37 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; }; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; -- cgit v0.10.2 From 33632ae75080762b577a89952105245897e1c834 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 23 Aug 2011 17:17:46 +0200 Subject: arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices Update DTS file with required clock frequencies for the i2c client devices existing on sdp4430. Add the twl6030 node inside the i2c1 controller node. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add the RTC submodule inside the twl node. Add tmp105 temperature sensor in i2c3 Add bh1780 Ambient Light Sensor in i2c3 Add hmc5843 3-Axis Digital Compass in i2c4 Signed-off-by: Benoit Cousson Acked-by: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 63c6b2b..01db8b7 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -18,3 +18,55 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; }; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + }; + + /* + * Ambient Light Sensor + * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf + */ + bh1780@29 { + compatible = "rohm,bh1780"; + reg = <0x29>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* + * 3-Axis Digital Compass + * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf + */ + hmc5843@1e { + compatible = "honeywell,hmc5843"; + reg = <0x1e>; + }; +}; -- cgit v0.10.2 From 5340b51d78a245e01a890e85f4f0159593f90153 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 14 Jul 2011 01:44:54 +0530 Subject: arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM Add required clock frequencies for the i2c client devices existing on beagle board. Add the twl4030 basic description with only the twl_rtc module. Add the EEPROM node. Based on original patch from Manju: http://www.spinics.net/lists/linux-omap/msg55831.html Signed-off-by: Benoit Cousson Acked-by: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 9f72cd4..714ba5d 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -18,3 +18,32 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; -- cgit v0.10.2 From 93651b85bbd1479321af1de0d14ca95c231e538a Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 23 Sep 2011 13:51:57 +0200 Subject: ARM: OMAP2+: board-generic: Remove i2c static init This mainly reverts the commit that was adding the i2c static init. Since the i2c and twl nodes are now present, there is no need for the static initialization anymore. Signed-off-by: Benoit Cousson Cc: Tony Lindgren Acked-by: Rob Herring Acked-by: Grant Likely diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687..7302ba7 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -95,22 +94,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, -}; - -static void __init omap3_i2c_init(void) -{ - omap3_pmic_init("twl4030", &beagle_twldata); -} - -static void __init omap3_init(void) -{ - omap3_i2c_init(); - omap_generic_init(); -} - static const char *omap3_boards_compat[] __initdata = { "ti,omap3", NULL, @@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_irq = omap_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = omap3_init, + .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, .restart = omap_prcm_restart, @@ -130,22 +113,6 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, -}; - -static void __init omap4_i2c_init(void) -{ - omap4_pmic_init("twl6030", &sdp4430_twldata); -} - -static void __init omap4_init(void) -{ - omap4_i2c_init(); - omap_generic_init(); -} - static const char *omap4_boards_compat[] __initdata = { "ti,omap4", NULL, @@ -157,7 +124,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_early = omap4430_init_early, .init_irq = omap_init_irq, .handle_irq = gic_handle_irq, - .init_machine = omap4_init, + .init_machine = omap_generic_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, .restart = omap_prcm_restart, -- cgit v0.10.2 From e3e5a92db430689fe918041e99cb04b8761f5a50 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 16 Aug 2011 11:51:54 +0200 Subject: arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson Cc: Grant Likely diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3d35559..7f8463b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -104,6 +104,60 @@ <0x48240100 0x0100>; }; + gpio1: gpio@4a310000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 8cbfbc2..8412746 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -122,7 +123,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) */ static int __init omap2_gpio_init(void) { - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, - NULL); + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + + return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); } postcore_initcall(omap2_gpio_init); -- cgit v0.10.2 From 385a64bbc2d2c3ef864190b010c74afc5b850195 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 16 Aug 2011 11:51:54 +0200 Subject: arm/dts: OMAP3: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP3. Signed-off-by: Benoit Cousson Cc: Grant Likely diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index c612135..4615ebb 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -69,6 +69,60 @@ reg = <0x48200000 0x1000>; }; + gpio1: gpio@48310000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@49050000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@49052000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@49054000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@49056000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@49058000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + uart1: serial@4806a000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; -- cgit v0.10.2 From efcf1e502012cc2cc9ee8165fa0a7679725c525c Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 20 Jan 2012 14:15:58 +0100 Subject: arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson Cc: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7f8463b..6c58453 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -209,5 +209,37 @@ #size-cells = <0>; ti,hwmods = "i2c4"; }; + + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + }; }; }; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 283d11e..8a489ba 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -725,7 +725,9 @@ static int __init omap2_init_devices(void) omap_init_dmic(); omap_init_camera(); omap_init_mbox(); - omap_init_mcspi(); + /* If dtb is there, the devices will be created dynamically */ + if (!of_have_populated_dt()) + omap_init_mcspi(); omap_init_pmu(); omap_hdq_init(); omap_init_sti(); -- cgit v0.10.2 From fc72d248d01a3bfef4cde6fe642536c94bee1306 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 20 Jan 2012 14:15:58 +0100 Subject: arm/dts: OMAP3: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP3 device. Signed-off-by: Benoit Cousson Cc: Grant Likely Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4615ebb..dc9425c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -167,5 +167,37 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + mcspi1: spi@48098000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap2-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + }; }; }; -- cgit v0.10.2 From e7c64db9f50d6523e20bc5b8f042645612e37b74 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 20 Jan 2012 14:17:00 +0100 Subject: arm/dts: omap4-sdp: Add ks8851 ethernet SPI device Add an ethernet SPI chip in the OMAP4 SDP/Blaze board DTS file. Add a fixed regulator node controlled by a GPIO line to supply the ethernet chip. Based on original code from Rajendra. Signed-off-by: Benoit Cousson Signed-off-by: Rajendra Nayak Acked-by: Rob Herring diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 01db8b7..31938c1 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -17,6 +17,16 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 16 0>; /* gpio line 48 */ + enable-active-high; + regulator-boot-on; + }; }; &i2c1 { @@ -70,3 +80,14 @@ reg = <0x1e>; }; }; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <2>; /* gpio line 34 */ + vdd-supply = <&vdd_eth>; + }; +}; -- cgit v0.10.2 From ecc7b060a76d2b454be79abe2c6b934dee850413 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 8 Feb 2012 15:50:12 -0800 Subject: arm/dts: twl: Pass regulator data from dt Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 714ba5d..54556b1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -26,6 +26,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + vsim: regulator@10 { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; }; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 8be5223..a94654c 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -18,4 +18,22 @@ compatible = "ti,twl4030-rtc"; interrupts = <11>; }; + + vdac: regulator@0 { + compatible = "ti,twl4030-vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpll2: regulator@1 { + compatible = "ti,twl4030-vpll2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vmmc1: regulator@2 { + compatible = "ti,twl4030-vmmc1"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index b7b4e5e..3b2f351 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -19,4 +19,68 @@ compatible = "ti,twl4030-rtc"; interrupts = <11>; }; + + vaux1: regulator@0 { + compatible = "ti,twl6030-vaux1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vaux2: regulator@1 { + compatible = "ti,twl6030-vaux2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + }; + + vaux3: regulator@2 { + compatible = "ti,twl6030-vaux3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; + + vmmc: regulator@3 { + compatible = "ti,twl6030-vmmc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + }; + + vpp: regulator@4 { + compatible = "ti,twl6030-vpp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + }; + + vusim: regulator@5 { + compatible = "ti,twl6030-vusim"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2900000>; + }; + + vdac: regulator@6 { + compatible = "ti,twl6030-vdac"; + }; + + vana: regulator@7 { + compatible = "ti,twl6030-vana"; + }; + + vcxio: regulator@8 { + compatible = "ti,twl6030-vcxio"; + }; + + vusb: regulator@9 { + compatible = "ti,twl6030-vusb"; + }; + + v1v8: regulator@10 { + compatible = "ti,twl6030-v1v8"; + }; + + v2v1: regulator@11 { + compatible = "ti,twl6030-v2v1"; + }; + + clk32kg: regulator@12 { + compatible = "ti,twl6030-clk32kg"; + }; }; -- cgit v0.10.2 From 7498176803ca57200ce658da3850abcabb5cff84 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 4 Oct 2011 17:10:27 +0530 Subject: arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 29646dc..ea6f5bb 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -52,3 +52,25 @@ &i2c4 { clock-frequency = <400000>; }; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; +}; + +&mmc2 { + status = "disable"; +}; + +&mmc3 { + status = "disable"; +}; + +&mmc4 { + status = "disable"; +}; + +&mmc5 { + ti,non-removable; + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 31938c1..67b2e98 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -91,3 +91,27 @@ vdd-supply = <&vdd_eth>; }; }; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&vaux1>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + status = "disable"; +}; + +&mmc4 { + status = "disable"; +}; + +&mmc5 { + ti,bus-width = <4>; + ti,non-removable; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 6c58453..359c497 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -241,5 +241,36 @@ ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; }; }; -- cgit v0.10.2 From b3431f5ba402a98a89b78a9408b4972d8870df4d Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 22 Feb 2012 17:42:27 +0530 Subject: arm/dts: OMAP3: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP3. Currenly limited to only omap3-beagle board. Signed-off-by: Rajendra Nayak Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 54556b1..8c756be 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -53,3 +53,17 @@ reg = <0x50>; }; }; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + ti,bus-width = <8>; +}; + +&mmc2 { + status = "disable"; +}; + +&mmc3 { + status = "disable"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index dc9425c..99474fa 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -199,5 +199,21 @@ ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + }; }; }; -- cgit v0.10.2 From 7f217794ffa72f208a250b79ab0b7ea3de19677f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 13 May 2012 00:14:24 -0400 Subject: mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball Signed-off-by: Arnd Bergmann diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 64bcb8b..0d93b4b 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -11,9 +11,11 @@ Required properties: - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; + reports inverted write-protect state; New devices should use + the generic "wp-inverted" property. - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. + only handle 1-bit data transfers. New devices should use the + generic "bus-width = <1>" property. - sdhci,auto-cmd12: (optional) specifies that a controller can only handle auto CMD12. diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index ab22fe6..c7e404b 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts : Should contain eSDHC interrupt Optional properties: -- fsl,card-wired : Indicate the card is wired to host permanently +- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection - cd-gpios : Specify GPIOs for card detection diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 89a0084..d64aea5 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -10,7 +10,8 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historic reasons. - interrupts : the interrupt of a card detect interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 0000000..6e70dcd --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,27 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Required properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- cd-gpios : Specify GPIOs for card detection, see gpio binding +- wp-gpios : Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the wp gpio line is inverted +- wp-inverted: when present, polarity on the wp gpio line is inverted +- non-removable: non-removable slot (like eMMC) +- max-frequency: maximum operating clock frequency + +Example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; +} diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index 7e51154..f77c303 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -7,12 +7,12 @@ Required properties: - compatible : Should be "nvidia,-sdhci" - reg : Should contain SD/MMC registers location and length - interrupts : Should contain SD/MMC interrupt +- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control -- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -23,5 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ - support-8bit; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index dbd4368..8a53958 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -15,7 +15,7 @@ Optional properties: ti,dual-volt: boolean, supports dual voltage cards -supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +bus-width: Number of data lines, default assumed is 1 if the property is missing. cd-gpios: GPIOs for card detection wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) @@ -27,7 +27,7 @@ Example: reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; ti,dual-volt; - ti,bus-width = <4>; + bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index c7ee86c..139138a 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -35,7 +35,7 @@ }; esdhc@50008000 { /* ESDHC2 */ - fsl,card-wired; + non-removable; status = "okay"; }; @@ -76,7 +76,7 @@ }; esdhc@50020000 { /* ESDHC3 */ - fsl,card-wired; + non-removable; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index ce1c823..d2eaf52 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -41,7 +41,7 @@ }; usdhc@0219c000 { /* uSDHC4 */ - fsl,card-wired; + non-removable; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8c756be..5b4506c 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -57,7 +57,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index ea6f5bb..31fb421 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -55,7 +55,7 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { @@ -72,5 +72,5 @@ &mmc5 { ti,non-removable; - ti,bus-width = <4>; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 67b2e98..a1dd873 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -94,12 +94,12 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { vmmc-supply = <&vaux1>; - ti,bus-width = <8>; + bus-width = <8>; ti,non-removable; }; @@ -112,6 +112,6 @@ }; &mmc5 { - ti,bus-width = <4>; + bus-width = <4>; ti,non-removable; }; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index ac3fb75..67c6511 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -54,6 +54,7 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; }; sdhci@78000200 { @@ -66,5 +67,6 @@ sdhci@78000400 { support-8bit; + bus-width = <8>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 6e8447d..e9cae68 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -100,6 +100,7 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; }; sdhci@c8000400 { @@ -111,5 +112,6 @@ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ support-8bit; + bus-width = <8>; }; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 6c02abb..03d3d79 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -97,6 +97,7 @@ cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; }; sdhci@c8000200 { @@ -109,6 +110,7 @@ sdhci@c8000600 { support-8bit; + bus-width = <8>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index dbf1c5a..8decf72 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -104,10 +104,12 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; }; usb@c5000000 { diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index 2dcff87..29e54c7 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -100,9 +100,11 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 7e283c8..fe0d609 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -119,6 +119,7 @@ sdhc@2e000 { status = "disabled"; sdhci,1-bit-only; + bus-width = <1>; }; par_io@e0100 { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 56d4499..33e81c2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1766,7 +1766,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) pdata->slots[0].nonremovable = true; pdata->slots[0].no_regulator_off_init = true; } - of_property_read_u32(np, "ti,bus-width", &bus_width); + of_property_read_u32(np, "bus-width", &bus_width); if (bus_width == 4) pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA; else if (bus_width == 8) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 8abdaf6..0d2b082 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -402,7 +402,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (!np) return -ENODEV; - if (of_get_property(np, "fsl,card-wired", NULL)) + if (of_get_property(np, "non-removable", NULL)) boarddata->cd_type = ESDHC_CD_PERMANENT; if (of_get_property(np, "fsl,cd-controller", NULL)) diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index c5c2a48..d9a4ef4 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -42,7 +42,8 @@ static struct sdhci_ops sdhci_pltfm_ops = { #ifdef CONFIG_OF static bool sdhci_of_wp_inverted(struct device_node *np) { - if (of_get_property(np, "sdhci,wp-inverted", NULL)) + if (of_get_property(np, "sdhci,wp-inverted", NULL) || + of_get_property(np, "wp-inverted", NULL)) return true; /* Old device trees don't have the wp-inverted property. */ @@ -59,13 +60,16 @@ void sdhci_get_of_property(struct platform_device *pdev) struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); const __be32 *clk; + u32 bus_width; int size; if (of_device_is_available(np)) { if (of_get_property(np, "sdhci,auto-cmd12", NULL)) host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; - if (of_get_property(np, "sdhci,1-bit-only", NULL)) + if (of_get_property(np, "sdhci,1-bit-only", NULL) || + (of_property_read_u32(np, "bus-width", &bus_width) == 0 && + bus_width == 1)) host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; if (sdhci_of_wp_inverted(np)) -- cgit v0.10.2