From f37fbd36c5f9fe716ddf783415a67de03fb0dc3d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 3 Sep 2012 20:29:34 +0200 Subject: Crypto: CESA: Add support for DT based instantiation. Based on work by Michael Walle and Jason Cooper. Added support for getting the interrupt number and address of SRAM from DT. Signed-off-by: Andrew Lunn Tested-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper Conflicts: arch/arm/mach-kirkwood/board-dt.c diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 0000000..47229b1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,20 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible : should be "marvell,orion-crypto" +- reg : base physical address of the engine and length of memory mapped + region, followed by base physical address of sram and its memory + length +- reg-names : "regs" , "sram"; +- interrupts : interrupt number + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0x4000000 0x800>; + reg-names = "regs" , "sram"; + interrupts = <22>; + status = "okay"; + }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cef9616..4e5b815 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -14,7 +14,8 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -105,5 +106,14 @@ clock-frequency = <100000>; status = "disabled"; }; + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xf5000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450..0d51901 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL), {}, }; @@ -60,7 +61,6 @@ static void __init kirkwood_dt_init(void) /* internal devices that every board has */ kirkwood_xor0_init(); kirkwood_xor1_init(); - kirkwood_crypto_init(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 21c1a87..24ccae4 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -19,6 +19,9 @@ #include #include #include +#include +#include +#include #include "mv_cesa.h" @@ -1062,7 +1065,10 @@ static int mv_probe(struct platform_device *pdev) goto err_unmap_reg; } - irq = platform_get_irq(pdev, 0); + if (pdev->dev.of_node) + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + else + irq = platform_get_irq(pdev, 0); if (irq < 0 || irq == NO_IRQ) { ret = irq; goto err_unmap_sram; @@ -1170,12 +1176,19 @@ static int mv_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id mv_cesa_of_match_table[] = { + { .compatible = "marvell,orion-crypto", }, + {} +}; +MODULE_DEVICE_TABLE(of, mv_cesa_of_match_table); + static struct platform_driver marvell_crypto = { .probe = mv_probe, - .remove = mv_remove, + .remove = __devexit_p(mv_remove), .driver = { .owner = THIS_MODULE, .name = "mv_crypto", + .of_match_table = of_match_ptr(mv_cesa_of_match_table), }, }; MODULE_ALIAS("platform:mv_crypto"); -- cgit v0.10.2