From f008db8c00c18d3125ca551e6961e7bd9aba6503 Mon Sep 17 00:00:00 2001 From: Jens Kuske Date: Wed, 6 May 2015 11:31:31 +0200 Subject: dmaengine: sun6i: Add support for Allwinner H3 (sun8i) variant The H3 SoC has the same dma engine as the A31 (sun6i), with a reduced amount of endpoints and physical channels. Add the proper config data and compatible string to support it. Signed-off-by: Jens Kuske Acked-by: Maxime Ripard Signed-off-by: Vinod Koul diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 9cdcba24d..d13c136 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -4,7 +4,10 @@ This driver follows the generic DMA bindings defined in dma.txt. Required properties: -- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma" +- compatible: Must be one of + "allwinner,sun6i-a31-dma" + "allwinner,sun8i-a23-dma" + "allwinner,sun8i-h3-dma" - reg: Should contain the registers base address and length - interrupts: Should contain a reference to the interrupt used by this device - clocks: Should contain a reference to the parent AHB clock diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index 11e5365..842ff97 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -891,9 +891,21 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = { .nr_max_vchans = 37, }; +/* + * The H3 has 12 physical channels, a maximum DRQ port id of 27, + * and a total of 34 usable source and destination endpoints. + */ + +static struct sun6i_dma_config sun8i_h3_dma_cfg = { + .nr_max_channels = 12, + .nr_max_requests = 27, + .nr_max_vchans = 34, +}; + static const struct of_device_id sun6i_dma_match[] = { { .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg }, { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg }, + { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg }, { /* sentinel */ } }; -- cgit v0.10.2