From f915f2c66e8bccf9f4f886f4a49888acd6b0b6b2 Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Tue, 8 Jul 2014 17:56:23 -0700 Subject: Input: keyspan_remote - remove unnecessary break after goto Signed-off-by: Fabian Frederick Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index 01f3b5b..a3fe4a9 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -392,7 +392,6 @@ static void keyspan_irq_recv(struct urb *urb) default: goto resubmit; - break; } if (debug) -- cgit v0.10.2 From f69c6ec2837cf73bb8068b74edd17bfcfd7640b1 Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Wed, 9 Jul 2014 09:45:57 -0700 Subject: Input: edt-ft5x06 - remove unnecessary null test Fix checkpatch warning: "WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required" Signed-off-by: Fabian Frederick Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index d4f3399..5a6d50c 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -733,8 +733,7 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata, static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) { - if (tsdata->debug_dir) - debugfs_remove_recursive(tsdata->debug_dir); + debugfs_remove_recursive(tsdata->debug_dir); kfree(tsdata->raw_buffer); } -- cgit v0.10.2 From 128bb95debc8302a999a495dd21726ca422da12a Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 15 Jul 2014 09:47:52 -0700 Subject: Input: add driver for Microchip's CAP1106 This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel capacitive touch sensor. For now, only the capacitive buttons are supported, and no specific settings that can be tweaked for individual channels, except for the device-wide sensitivity gain. The defaults seem to work just fine out of the box, so I'll leave configurable parameters for someone who's in need of them and who can actually measure the impact. All registers are prepared, however. Many of them are just not used for now. The implementation does not make any attempt to be compatible to platform data driven boards, but fully depends on CONFIG_OF. Power management functions are also left for volounteers with the ability to actually test them. Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap1106.txt new file mode 100644 index 0000000..4b46390 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cap1106.txt @@ -0,0 +1,53 @@ +Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor + +The node for this driver must be a child of a I2C controller node, as the +device communication via I2C only. + +Required properties: + + compatible: Must be "microchip,cap1106" + + reg: The I2C slave address of the device. + Only 0x28 is valid. + + interrupts: Property describing the interrupt line the + device's ALERT#/CM_IRQ# pin is connected to. + The device only has one interrupt source. + +Optional properties: + + autorepeat: Enables the Linux input system's autorepeat + feature on the input device. + + microchip,sensor-gain: Defines the gain of the sensor circuitry. This + effectively controls the sensitivity, as a + smaller delta capacitance is required to + generate the same delta count values. + Valid values are 1, 2, 4, and 8. + By default, a gain of 1 is set. + + linux,keycodes: Specifies an array of numeric keycode values to + be used for the channels. If this property is + omitted, KEY_A, KEY_B, etc are used as + defaults. The array must have exactly six + entries. + +Example: + +i2c_controller { + cap1106@28 { + compatible = "microchip,cap1106"; + interrupt-parent = <&gpio1>; + interrupts = <0 0>; + reg = <0x28>; + autorepeat; + microchip,sensor-gain = <2>; + + linux,keycodes = <103 /* KEY_UP */ + 106 /* KEY_RIGHT */ + 108 /* KEY_DOWN */ + 105 /* KEY_LEFT */ + 109 /* KEY_PAGEDOWN */ + 104>; /* KEY_PAGEUP */ + }; +} diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 0f84f23..942338b 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -665,4 +665,14 @@ config KEYBOARD_CROS_EC To compile this driver as a module, choose M here: the module will be called cros_ec_keyb. +config KEYBOARD_CAP1106 + tristate "Microchip CAP1106 touch sensor" + depends on OF && I2C + select REGMAP_I2C + help + Say Y here to enable the CAP1106 touch sensor driver. + + To compile this driver as a module, choose M here: the + module will be called cap1106. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 7504ae1..0a33456 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c new file mode 100644 index 0000000..f7d7a0d --- /dev/null +++ b/drivers/input/keyboard/cap1106.c @@ -0,0 +1,335 @@ +/* + * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor + * + * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106 + * + * (c) 2014 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CAP1106_REG_MAIN_CONTROL 0x00 +#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP1106_REG_GENERAL_STATUS 0x02 +#define CAP1106_REG_SENSOR_INPUT 0x03 +#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a +#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f +#define CAP1106_REG_CONFIG 0x20 +#define CAP1106_REG_SENSOR_ENABLE 0x21 +#define CAP1106_REG_SENSOR_CONFIG 0x22 +#define CAP1106_REG_SENSOR_CONFIG2 0x23 +#define CAP1106_REG_SAMPLING_CONFIG 0x24 +#define CAP1106_REG_CALIBRATION 0x25 +#define CAP1106_REG_INT_ENABLE 0x26 +#define CAP1106_REG_REPEAT_RATE 0x28 +#define CAP1106_REG_MT_CONFIG 0x2a +#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b +#define CAP1106_REG_MT_PATTERN 0x2d +#define CAP1106_REG_RECALIB_CONFIG 0x2f +#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP1106_REG_STANDBY_CHANNEL 0x40 +#define CAP1106_REG_STANDBY_CONFIG 0x41 +#define CAP1106_REG_STANDBY_SENSITIVITY 0x42 +#define CAP1106_REG_STANDBY_THRESH 0x43 +#define CAP1106_REG_CONFIG2 0x44 +#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba +#define CAP1106_REG_PRODUCT_ID 0xfd +#define CAP1106_REG_MANUFACTURER_ID 0xfe +#define CAP1106_REG_REVISION 0xff + +#define CAP1106_NUM_CHN 6 +#define CAP1106_PRODUCT_ID 0x55 +#define CAP1106_MANUFACTURER_ID 0x5d + +struct cap1106_priv { + struct regmap *regmap; + struct input_dev *idev; + + /* config */ + unsigned int keycodes[CAP1106_NUM_CHN]; +}; + +static const struct reg_default cap1106_reg_defaults[] = { + { CAP1106_REG_MAIN_CONTROL, 0x00 }, + { CAP1106_REG_GENERAL_STATUS, 0x00 }, + { CAP1106_REG_SENSOR_INPUT, 0x00 }, + { CAP1106_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP1106_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP1106_REG_CONFIG, 0x20 }, + { CAP1106_REG_SENSOR_ENABLE, 0x3f }, + { CAP1106_REG_SENSOR_CONFIG, 0xa4 }, + { CAP1106_REG_SENSOR_CONFIG2, 0x07 }, + { CAP1106_REG_SAMPLING_CONFIG, 0x39 }, + { CAP1106_REG_CALIBRATION, 0x00 }, + { CAP1106_REG_INT_ENABLE, 0x3f }, + { CAP1106_REG_REPEAT_RATE, 0x3f }, + { CAP1106_REG_MT_CONFIG, 0x80 }, + { CAP1106_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP1106_REG_MT_PATTERN, 0x3f }, + { CAP1106_REG_RECALIB_CONFIG, 0x8a }, + { CAP1106_REG_SENSOR_THRESH(0), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(1), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(2), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(3), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(4), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(5), 0x40 }, + { CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP1106_REG_STANDBY_CHANNEL, 0x00 }, + { CAP1106_REG_STANDBY_CONFIG, 0x39 }, + { CAP1106_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP1106_REG_STANDBY_THRESH, 0x40 }, + { CAP1106_REG_CONFIG2, 0x40 }, + { CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap1106_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP1106_REG_MAIN_CONTROL: + case CAP1106_REG_SENSOR_INPUT: + case CAP1106_REG_SENOR_DELTA(0): + case CAP1106_REG_SENOR_DELTA(1): + case CAP1106_REG_SENOR_DELTA(2): + case CAP1106_REG_SENOR_DELTA(3): + case CAP1106_REG_SENOR_DELTA(4): + case CAP1106_REG_SENOR_DELTA(5): + case CAP1106_REG_PRODUCT_ID: + case CAP1106_REG_MANUFACTURER_ID: + case CAP1106_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap1106_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP1106_REG_REVISION, + .reg_defaults = cap1106_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap1106_volatile_reg, +}; + +static irqreturn_t cap1106_thread_func(int irq_num, void *data) +{ + struct cap1106_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < CAP1106_NUM_CHN; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep) +{ + return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, + CAP1106_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap1106_input_open(struct input_dev *idev) +{ + struct cap1106_priv *priv = input_get_drvdata(idev); + + return cap1106_set_sleep(priv, false); +} + +static void cap1106_input_close(struct input_dev *idev) +{ + struct cap1106_priv *priv = input_get_drvdata(idev); + + cap1106_set_sleep(priv, true); +} + +static int cap1106_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap1106_priv *priv; + struct device_node *node; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32, keycodes[CAP1106_NUM_CHN]; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != CAP1106_PRODUCT_ID) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, CAP1106_PRODUCT_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP1106_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP1106_MANUFACTURER_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev); + i2c_set_clientdata(i2c_client, priv); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); + + /* Provide some useful defaults */ + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + keycodes, ARRAY_SIZE(keycodes)); + + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + priv->keycodes[i] = keycodes[i]; + + error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, + CAP1106_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP1106 capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < CAP1106_NUM_CHN; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + priv->idev->id.vendor = CAP1106_MANUFACTURER_ID; + priv->idev->id.product = CAP1106_PRODUCT_ID; + priv->idev->id.version = rev; + + priv->idev->open = cap1106_input_open; + priv->idev->close = cap1106_input_close; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap1106_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap1106_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap1106_dt_ids); + +static const struct i2c_device_id cap1106_i2c_ids[] = { + { "cap1106", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids); + +static struct i2c_driver cap1106_i2c_driver = { + .driver = { + .name = "cap1106", + .owner = THIS_MODULE, + .of_match_table = cap1106_dt_ids, + }, + .id_table = cap1106_i2c_ids, + .probe = cap1106_i2c_probe, +}; + +module_i2c_driver(cap1106_i2c_driver); + +MODULE_ALIAS("platform:cap1106"); +MODULE_DESCRIPTION("Microchip CAP1106 driver"); +MODULE_AUTHOR("Daniel Mack "); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 997502f89346bb9b7002dc4f4003636245346e8f Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Sat, 19 Jul 2014 16:16:02 -0700 Subject: Input: max7359 - introduce the use of managed interfaces This patch introduces the use of managed interfaces like devm_kzalloc, devm_input_allocate_device, devm_request_threaded_irq etc. and does away with the calls to free the allocated memory. The remove function is no longer required and is completely done away with. Also, the labels in the probe function are removed. Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c index 430b545..faa6da5 100644 --- a/drivers/input/keyboard/max7359_keypad.c +++ b/drivers/input/keyboard/max7359_keypad.c @@ -203,12 +203,17 @@ static int max7359_probe(struct i2c_client *client, dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); - keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!keypad || !input_dev) { + keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad), + GFP_KERNEL); + if (!keypad) { dev_err(&client->dev, "failed to allocate memory\n"); - error = -ENOMEM; - goto failed_free_mem; + return -ENOMEM; + } + + input_dev = devm_input_allocate_device(&client->dev); + if (!input_dev) { + dev_err(&client->dev, "failed to allocate input device\n"); + return -ENOMEM; } keypad->client = client; @@ -230,19 +235,20 @@ static int max7359_probe(struct i2c_client *client, max7359_build_keycode(keypad, keymap_data); - error = request_threaded_irq(client->irq, NULL, max7359_interrupt, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - client->name, keypad); + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + max7359_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, keypad); if (error) { dev_err(&client->dev, "failed to register interrupt\n"); - goto failed_free_mem; + return error; } /* Register the input device */ error = input_register_device(input_dev); if (error) { dev_err(&client->dev, "failed to register input device\n"); - goto failed_free_irq; + return error; } /* Initialize MAX7359 */ @@ -252,24 +258,6 @@ static int max7359_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 1); return 0; - -failed_free_irq: - free_irq(client->irq, keypad); -failed_free_mem: - input_free_device(input_dev); - kfree(keypad); - return error; -} - -static int max7359_remove(struct i2c_client *client) -{ - struct max7359_keypad *keypad = i2c_get_clientdata(client); - - free_irq(client->irq, keypad); - input_unregister_device(keypad->input_dev); - kfree(keypad); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -313,7 +301,6 @@ static struct i2c_driver max7359_i2c_driver = { .pm = &max7359_pm, }, .probe = max7359_probe, - .remove = max7359_remove, .id_table = max7359_ids, }; -- cgit v0.10.2 From b4e05923f9c5bb65ac82988d7b53cfd7425e6f36 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 20 Jul 2014 13:35:44 -0700 Subject: Input: add support for Wacom protocol 4 serial tablets Recent version of xf86-input-wacom no longer support directly accessing serial tablets. Instead xf86-input-wacom now expects all wacom tablets to be driven by the kernel and to show up as evdev devices. This has caused old serial Wacom tablets to stop working for people who still have such tablets. Julian Squires has written a serio input driver to fix this: https://github.com/tokenrove/wacom-serial-iv This is a cleaned up version of this driver with improved Graphire support (I own an old Graphire myself). Signed-off-by: Julian Squires Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/MAINTAINERS b/MAINTAINERS index 51ebb77..c68bd8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9708,6 +9708,13 @@ M: Pierre Ossman S: Maintained F: drivers/mmc/host/wbsd.* +WACOM PROTOCOL 4 SERIAL TABLETS +M: Julian Squires +M: Hans de Goede +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/tablet/wacom_serial4.c + WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck L: linux-watchdog@vger.kernel.org diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index bed7cbf..a5121b0 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -89,4 +89,14 @@ config TABLET_USB_WACOM To compile this driver as a module, choose M here: the module will be called wacom. +config TABLET_SERIAL_WACOM4 + tristate "Wacom protocol 4 serial tablet support" + select SERIO + help + Say Y here if you want to use Wacom protocol 4 serial tablets. + E.g. serial versions of the Cintiq, Graphire or Penpartner. + + To compile this driver as a module, choose M here: the + module will be called wacom_serial4. + endif diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile index 3f6c252..4d9339f 100644 --- a/drivers/input/tablet/Makefile +++ b/drivers/input/tablet/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o +obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c new file mode 100644 index 0000000..d3d251e --- /dev/null +++ b/drivers/input/tablet/wacom_serial4.c @@ -0,0 +1,616 @@ +/* + * Wacom protocol 4 serial tablet driver + * + * Copyright 2014 Hans de Goede + * Copyright 2011-2012 Julian Squires + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version of 2 of the License, or (at your + * option) any later version. See the file COPYING in the main directory of + * this archive for more details. + * + * Many thanks to Bill Seremetis, without whom PenPartner support + * would not have been possible. Thanks to Patrick Mahoney. + * + * This driver was developed with reference to much code written by others, + * particularly: + * - elo, gunze drivers by Vojtech Pavlik ; + * - wacom_w8001 driver by Jaya Kumar ; + * - the USB wacom input driver, credited to many people + * (see drivers/input/tablet/wacom.h); + * - new and old versions of linuxwacom / xf86-input-wacom credited to + * Frederic Lepied, France. and + * Ping Cheng, Wacom. ; + * - and xf86wacom.c (a presumably ancient version of the linuxwacom code), + * by Frederic Lepied and Raph Levien . + * + * To do: + * - support pad buttons; (requires access to a model with pad buttons) + * - support (protocol 4-style) tilt (requires access to a > 1.4 rom model) + */ + +/* + * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code, + * protocol 4 uses 7 or 9 byte of data in the following format: + * + * Byte 1 + * bit 7 Sync bit always 1 + * bit 6 Pointing device detected + * bit 5 Cursor = 0 / Stylus = 1 + * bit 4 Reserved + * bit 3 1 if a button on the pointing device has been pressed + * bit 2 P0 (optional) + * bit 1 X15 + * bit 0 X14 + * + * Byte 2 + * bit 7 Always 0 + * bits 6-0 = X13 - X7 + * + * Byte 3 + * bit 7 Always 0 + * bits 6-0 = X6 - X0 + * + * Byte 4 + * bit 7 Always 0 + * bit 6 B3 + * bit 5 B2 + * bit 4 B1 + * bit 3 B0 + * bit 2 P1 (optional) + * bit 1 Y15 + * bit 0 Y14 + * + * Byte 5 + * bit 7 Always 0 + * bits 6-0 = Y13 - Y7 + * + * Byte 6 + * bit 7 Always 0 + * bits 6-0 = Y6 - Y0 + * + * Byte 7 + * bit 7 Always 0 + * bit 6 Sign of pressure data; or wheel-rel for cursor tool + * bit 5 P7; or REL1 for cursor tool + * bit 4 P6; or REL0 for cursor tool + * bit 3 P5 + * bit 2 P4 + * bit 1 P3 + * bit 0 P2 + * + * byte 8 and 9 are optional and present only + * in tilt mode. + * + * Byte 8 + * bit 7 Always 0 + * bit 6 Sign of tilt X + * bit 5 Xt6 + * bit 4 Xt5 + * bit 3 Xt4 + * bit 2 Xt3 + * bit 1 Xt2 + * bit 0 Xt1 + * + * Byte 9 + * bit 7 Always 0 + * bit 6 Sign of tilt Y + * bit 5 Yt6 + * bit 4 Yt5 + * bit 3 Yt4 + * bit 2 Yt3 + * bit 1 Yt2 + * bit 0 Yt1 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "wacom_wac.h" + +MODULE_AUTHOR("Julian Squires , Hans de Goede "); +MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver"); +MODULE_LICENSE("GPL"); + +#define REQUEST_MODEL_AND_ROM_VERSION "~#" +#define REQUEST_MAX_COORDINATES "~C\r" +#define REQUEST_CONFIGURATION_STRING "~R\r" +#define REQUEST_RESET_TO_PROTOCOL_IV "\r#" +/* + * Note: sending "\r$\r" causes at least the Digitizer II to send + * packets in ASCII instead of binary. "\r#" seems to undo that. + */ + +#define COMMAND_START_SENDING_PACKETS "ST\r" +#define COMMAND_STOP_SENDING_PACKETS "SP\r" +#define COMMAND_MULTI_MODE_INPUT "MU1\r" +#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r" +#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r" +#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r" +#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r" +#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r" +#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r" +#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r" +#define COMMAND_Z_FILTER "ZF1\r" + +/* Note that this is a protocol 4 packet without tilt information. */ +#define PACKET_LENGTH 7 +#define DATA_SIZE 32 + +/* flags */ +#define F_COVERS_SCREEN 0x01 +#define F_HAS_STYLUS2 0x02 +#define F_HAS_SCROLLWHEEL 0x04 + +enum { STYLUS = 1, ERASER, CURSOR }; + +static const struct { + int device_id; + int input_id; +} tools[] = { + { 0, 0 }, + { STYLUS_DEVICE_ID, BTN_TOOL_PEN }, + { ERASER_DEVICE_ID, BTN_TOOL_RUBBER }, + { CURSOR_DEVICE_ID, BTN_TOOL_MOUSE }, +}; + +struct wacom { + struct input_dev *dev; + struct completion cmd_done; + int result; + u8 expect; + u8 eraser_mask; + unsigned int extra_z_bits; + unsigned int flags; + unsigned int res_x, res_y; + unsigned int max_x, max_y; + unsigned int tool; + unsigned int idx; + u8 data[DATA_SIZE]; + char phys[32]; +}; + +enum { + MODEL_CINTIQ = 0x504C, /* PL */ + MODEL_CINTIQ2 = 0x4454, /* DT */ + MODEL_DIGITIZER_II = 0x5544, /* UD */ + MODEL_GRAPHIRE = 0x4554, /* ET */ + MODEL_PENPARTNER = 0x4354, /* CT */ +}; + +static void wacom_handle_model_response(struct wacom *wacom) +{ + int major_v, minor_v, r = 0; + char *p; + + p = strrchr(wacom->data, 'V'); + if (p) + r = sscanf(p + 1, "%u.%u", &major_v, &minor_v); + if (r != 2) + major_v = minor_v = 0; + + switch (wacom->data[2] << 8 | wacom->data[3]) { + case MODEL_CINTIQ: /* UNTESTED */ + case MODEL_CINTIQ2: + if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) { + wacom->dev->name = "Wacom Cintiq"; + wacom->dev->id.version = MODEL_CINTIQ; + } else { + wacom->dev->name = "Wacom Cintiq II"; + wacom->dev->id.version = MODEL_CINTIQ2; + } + wacom->res_x = 508; + wacom->res_y = 508; + + switch (wacom->data[5] << 8 | wacom->data[6]) { + case 0x3731: /* PL-710 */ + wacom->res_x = 2540; + wacom->res_y = 2540; + /* fall through */ + case 0x3535: /* PL-550 */ + case 0x3830: /* PL-800 */ + wacom->extra_z_bits = 2; + } + + wacom->flags = F_COVERS_SCREEN; + break; + + case MODEL_PENPARTNER: + wacom->dev->name = "Wacom Penpartner"; + wacom->dev->id.version = MODEL_PENPARTNER; + wacom->res_x = 1000; + wacom->res_y = 1000; + break; + + case MODEL_GRAPHIRE: + wacom->dev->name = "Wacom Graphire"; + wacom->dev->id.version = MODEL_GRAPHIRE; + wacom->res_x = 1016; + wacom->res_y = 1016; + wacom->max_x = 5103; + wacom->max_y = 3711; + wacom->extra_z_bits = 2; + wacom->eraser_mask = 0x08; + wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; + break; + + case MODEL_DIGITIZER_II: + wacom->dev->name = "Wacom Digitizer II"; + wacom->dev->id.version = MODEL_DIGITIZER_II; + if (major_v == 1 && minor_v <= 2) + wacom->extra_z_bits = 0; /* UNTESTED */ + break; + + default: + dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n", + wacom->data); + wacom->result = -ENODEV; + return; + } + + dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n", + wacom->dev->name, major_v, minor_v); +} + +static void wacom_handle_configuration_response(struct wacom *wacom) +{ + int r, skip; + + dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data); + r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip, + &wacom->res_x, &wacom->res_y); + if (r != 5) + dev_warn(&wacom->dev->dev, "could not get resolution\n"); +} + +static void wacom_handle_coordinates_response(struct wacom *wacom) +{ + int r; + + dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data); + r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y); + if (r != 2) + dev_warn(&wacom->dev->dev, "could not get max coordinates\n"); +} + +static void wacom_handle_response(struct wacom *wacom) +{ + if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) { + dev_err(&wacom->dev->dev, + "Wacom got an unexpected response: %s\n", wacom->data); + wacom->result = -EIO; + } else { + wacom->result = 0; + + switch (wacom->data[1]) { + case '#': + wacom_handle_model_response(wacom); + break; + case 'R': + wacom_handle_configuration_response(wacom); + break; + case 'C': + wacom_handle_coordinates_response(wacom); + break; + } + } + + complete(&wacom->cmd_done); +} + +static void wacom_handle_packet(struct wacom *wacom) +{ + u8 in_proximity_p, stylus_p, button; + unsigned int tool; + int x, y, z; + + in_proximity_p = wacom->data[0] & 0x40; + stylus_p = wacom->data[0] & 0x20; + button = (wacom->data[3] & 0x78) >> 3; + x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2]; + y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5]; + + if (in_proximity_p && stylus_p) { + z = wacom->data[6] & 0x7f; + if (wacom->extra_z_bits >= 1) + z = z << 1 | (wacom->data[3] & 0x4) >> 2; + if (wacom->extra_z_bits > 1) + z = z << 1 | (wacom->data[0] & 0x4) >> 2; + z = z ^ (0x40 << wacom->extra_z_bits); + } else { + z = -1; + } + + if (stylus_p) + tool = (button & wacom->eraser_mask) ? ERASER : STYLUS; + else + tool = CURSOR; + + if (tool != wacom->tool && wacom->tool != 0) { + input_report_key(wacom->dev, tools[wacom->tool].input_id, 0); + input_sync(wacom->dev); + } + wacom->tool = tool; + + input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p); + input_report_abs(wacom->dev, ABS_MISC, + in_proximity_p ? tools[tool].device_id : 0); + input_report_abs(wacom->dev, ABS_X, x); + input_report_abs(wacom->dev, ABS_Y, y); + input_report_abs(wacom->dev, ABS_PRESSURE, z); + if (stylus_p) { + input_report_key(wacom->dev, BTN_TOUCH, button & 1); + input_report_key(wacom->dev, BTN_STYLUS, button & 2); + input_report_key(wacom->dev, BTN_STYLUS2, button & 4); + } else { + input_report_key(wacom->dev, BTN_LEFT, button & 1); + input_report_key(wacom->dev, BTN_RIGHT, button & 2); + input_report_key(wacom->dev, BTN_MIDDLE, button & 4); + /* handle relative wheel for non-stylus device */ + z = (wacom->data[6] & 0x30) >> 4; + if (wacom->data[6] & 0x40) + z = -z; + input_report_rel(wacom->dev, REL_WHEEL, z); + } + input_sync(wacom->dev); +} + +static void wacom_clear_data_buf(struct wacom *wacom) +{ + memset(wacom->data, 0, DATA_SIZE); + wacom->idx = 0; +} + +static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct wacom *wacom = serio_get_drvdata(serio); + + if (data & 0x80) + wacom->idx = 0; + + /* + * We're either expecting a carriage return-terminated ASCII + * response string, or a seven-byte packet with the MSB set on + * the first byte. + * + * Note however that some tablets (the PenPartner, for + * example) don't send a carriage return at the end of a + * command. We handle these by waiting for timeout. + */ + if (data == '\r' && !(wacom->data[0] & 0x80)) { + wacom_handle_response(wacom); + wacom_clear_data_buf(wacom); + return IRQ_HANDLED; + } + + /* Leave place for 0 termination */ + if (wacom->idx > (DATA_SIZE - 2)) { + dev_dbg(&wacom->dev->dev, + "throwing away %d bytes of garbage\n", wacom->idx); + wacom_clear_data_buf(wacom); + } + wacom->data[wacom->idx++] = data; + + if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) { + wacom_handle_packet(wacom); + wacom_clear_data_buf(wacom); + } + + return IRQ_HANDLED; +} + +static void wacom_disconnect(struct serio *serio) +{ + struct wacom *wacom = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(wacom->dev); + kfree(wacom); +} + +static int wacom_send(struct serio *serio, const u8 *command) +{ + int err = 0; + + for (; !err && *command; command++) + err = serio_write(serio, *command); + + return err; +} + +static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio) +{ + const u8 *cmd; + + switch (wacom->dev->id.version) { + case MODEL_CINTIQ: /* UNTESTED */ + cmd = COMMAND_ORIGIN_IN_UPPER_LEFT + COMMAND_TRANSMIT_AT_MAX_RATE + COMMAND_ENABLE_CONTINUOUS_MODE + COMMAND_START_SENDING_PACKETS; + break; + + case MODEL_PENPARTNER: + cmd = COMMAND_ENABLE_PRESSURE_MODE + COMMAND_START_SENDING_PACKETS; + break; + + default: + cmd = COMMAND_MULTI_MODE_INPUT + COMMAND_ORIGIN_IN_UPPER_LEFT + COMMAND_ENABLE_ALL_MACRO_BUTTONS + COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS + COMMAND_TRANSMIT_AT_MAX_RATE + COMMAND_DISABLE_INCREMENTAL_MODE + COMMAND_ENABLE_CONTINUOUS_MODE + COMMAND_Z_FILTER + COMMAND_START_SENDING_PACKETS; + break; + } + + return wacom_send(serio, cmd); +} + +static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio, + const u8 *cmd, const char *desc) +{ + int err; + unsigned long u; + + wacom->expect = cmd[1]; + init_completion(&wacom->cmd_done); + + err = wacom_send(serio, cmd); + if (err) + return err; + + u = wait_for_completion_timeout(&wacom->cmd_done, HZ); + if (u == 0) { + /* Timeout, process what we've received. */ + wacom_handle_response(wacom); + } + + wacom->expect = 0; + return wacom->result; +} + +static int wacom_setup(struct wacom *wacom, struct serio *serio) +{ + int err; + + /* Note that setting the link speed is the job of inputattach. + * We assume that reset negotiation has already happened, + * here. */ + err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION, + "model and version"); + if (err) + return err; + + if (!(wacom->res_x && wacom->res_y)) { + err = wacom_send_and_wait(wacom, serio, + REQUEST_CONFIGURATION_STRING, + "configuration string"); + if (err) + return err; + } + + if (!(wacom->max_x && wacom->max_y)) { + err = wacom_send_and_wait(wacom, serio, + REQUEST_MAX_COORDINATES, + "coordinates string"); + if (err) + return err; + } + + return wacom_send_setup_string(wacom, serio); +} + +static int wacom_connect(struct serio *serio, struct serio_driver *drv) +{ + struct wacom *wacom; + struct input_dev *input_dev; + int err = -ENOMEM; + + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev) + goto free_device; + + wacom->dev = input_dev; + wacom->extra_z_bits = 1; + wacom->eraser_mask = 0x04; + wacom->tool = wacom->idx = 0; + snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys); + input_dev->phys = wacom->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_WACOM_IV; + input_dev->id.product = serio->id.extra; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = + BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL); + set_bit(ABS_MISC, input_dev->absbit); + set_bit(BTN_TOOL_PEN, input_dev->keybit); + set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_STYLUS, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); + set_bit(BTN_RIGHT, input_dev->keybit); + set_bit(BTN_MIDDLE, input_dev->keybit); + + serio_set_drvdata(serio, wacom); + + err = serio_open(serio, drv); + if (err) + goto free_device; + + err = wacom_setup(wacom, serio); + if (err) + goto close_serio; + + set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (!(wacom->flags & F_COVERS_SCREEN)) + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + if (wacom->flags & F_HAS_STYLUS2) + __set_bit(BTN_STYLUS2, input_dev->keybit); + + if (wacom->flags & F_HAS_SCROLLWHEEL) + __set_bit(REL_WHEEL, input_dev->relbit); + + input_abs_set_res(wacom->dev, ABS_X, wacom->res_x); + input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y); + input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0); + input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0); + input_set_abs_params(wacom->dev, ABS_PRESSURE, -1, + (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0); + + err = input_register_device(wacom->dev); + if (err) + goto close_serio; + + return 0; + +close_serio: + serio_close(serio); +free_device: + serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(wacom); + return err; +} + +static struct serio_device_id wacom_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_WACOM_IV, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, wacom_serio_ids); + +static struct serio_driver wacom_drv = { + .driver = { + .name = "wacom_serial4", + }, + .description = "Wacom protocol 4 serial tablet driver", + .id_table = wacom_serio_ids, + .interrupt = wacom_interrupt, + .connect = wacom_connect, + .disconnect = wacom_disconnect, +}; + +module_serio_driver(wacom_drv); diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h index 9f53fa7..becdd78 100644 --- a/include/uapi/linux/serio.h +++ b/include/uapi/linux/serio.h @@ -76,5 +76,6 @@ #define SERIO_HAMPSHIRE 0x3b #define SERIO_PS2MULT 0x3c #define SERIO_TSC40 0x3d +#define SERIO_WACOM_IV 0x3e #endif /* _UAPI_SERIO_H */ -- cgit v0.10.2 From 09c8fb63fb976f77af54f10a5ec2e3bb30dfc86f Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 8 Jul 2014 17:57:42 -0700 Subject: Input: s3c2410_ts - fix preparing/enabling clock Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick Reviewed-by: Tomasz Figa Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 19cb247..5a69ded 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -264,7 +264,7 @@ static int s3c2410ts_probe(struct platform_device *pdev) return -ENOENT; } - clk_enable(ts.clock); + clk_prepare_enable(ts.clock); dev_dbg(dev, "got and enabled clocks\n"); ts.irq_tc = ret = platform_get_irq(pdev, 0); @@ -369,7 +369,7 @@ static int s3c2410ts_remove(struct platform_device *pdev) free_irq(ts.irq_tc, ts.input); del_timer_sync(&touch_timer); - clk_disable(ts.clock); + clk_disable_unprepare(ts.clock); clk_put(ts.clock); input_unregister_device(ts.input); -- cgit v0.10.2 From 3974037039e925a9645e70e1dc91735d28faad95 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 21 Jul 2014 10:02:11 -0700 Subject: Input: zforce - add regulator handling It's possible that the controller has an individually switchable power supply. Therefore add support to control a supplying regulator. As this is not always the case, the regulator is requested as optional. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt index 2faf1f1..80c37df 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt @@ -9,6 +9,9 @@ Required properties: - x-size: horizontal resolution of touchscreen - y-size: vertical resolution of touchscreen +Optional properties: +- vdd-supply: Regulator controlling the controller supply + Example: i2c@00000000 { @@ -18,6 +21,7 @@ Example: compatible = "neonode,zforce"; reg = <0x50>; interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; gpios = <&gpio5 6 0>, /* INT */ <&gpio5 9 0>; /* RST */ diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index feea85b..8ba48f5 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -29,6 +29,8 @@ #include #include #include +#include +#include #include #include @@ -117,6 +119,8 @@ struct zforce_ts { const struct zforce_ts_platdata *pdata; char phys[32]; + struct regulator *reg_vdd; + bool suspending; bool suspended; bool boot_complete; @@ -690,6 +694,11 @@ static void zforce_reset(void *data) struct zforce_ts *ts = data; gpio_set_value(ts->pdata->gpio_rst, 0); + + udelay(10); + + if (!IS_ERR(ts->reg_vdd)) + regulator_disable(ts->reg_vdd); } static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) @@ -765,10 +774,32 @@ static int zforce_probe(struct i2c_client *client, return ret; } + ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd"); + if (IS_ERR(ts->reg_vdd)) { + ret = PTR_ERR(ts->reg_vdd); + if (ret == -EPROBE_DEFER) + return ret; + } else { + ret = regulator_enable(ts->reg_vdd); + if (ret) + return ret; + + /* + * according to datasheet add 100us grace time after regular + * regulator enable delay. + */ + udelay(100); + } + ret = devm_add_action(&client->dev, zforce_reset, ts); if (ret) { dev_err(&client->dev, "failed to register reset action, %d\n", ret); + + /* hereafter the regulator will be disabled by the action */ + if (!IS_ERR(ts->reg_vdd)) + regulator_disable(ts->reg_vdd); + return ret; } -- cgit v0.10.2 From bcb898e5873430d8121eb8df07d5fbfb49134167 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 20 Jul 2014 17:16:23 -0700 Subject: Input: uinput - uinput_validate_absbits() cleanup This moves basic checks and setup from uinput_setup_device() into uinput_validate_absbits() to make it easier to use. This way, we can call it from other places without copying the boilerplate code. Reviewed-by: Peter Hutterer Signed-off-by: David Herrmann Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 8569362..883f045 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -311,7 +311,14 @@ static int uinput_open(struct inode *inode, struct file *file) static int uinput_validate_absbits(struct input_dev *dev) { unsigned int cnt; - int retval = 0; + int nslot; + + if (!test_bit(EV_ABS, dev->evbit)) + return 0; + + /* + * Check if absmin/absmax/absfuzz/absflat are sane. + */ for (cnt = 0; cnt < ABS_CNT; cnt++) { int min, max; @@ -327,8 +334,7 @@ static int uinput_validate_absbits(struct input_dev *dev) UINPUT_NAME, cnt, input_abs_get_min(dev, cnt), input_abs_get_max(dev, cnt)); - retval = -EINVAL; - break; + return -EINVAL; } if (input_abs_get_flat(dev, cnt) > @@ -340,11 +346,18 @@ static int uinput_validate_absbits(struct input_dev *dev) input_abs_get_flat(dev, cnt), input_abs_get_min(dev, cnt), input_abs_get_max(dev, cnt)); - retval = -EINVAL; - break; + return -EINVAL; } } - return retval; + + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + input_mt_init_slots(dev, nslot, 0); + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } + + return 0; } static int uinput_allocate_device(struct uinput_device *udev) @@ -410,19 +423,9 @@ static int uinput_setup_device(struct uinput_device *udev, input_abs_set_flat(dev, i, user_dev->absflat[i]); } - /* check if absmin/absmax/absfuzz/absflat are filled as - * told in Documentation/input/input-programming.txt */ - if (test_bit(EV_ABS, dev->evbit)) { - retval = uinput_validate_absbits(dev); - if (retval < 0) - goto exit; - if (test_bit(ABS_MT_SLOT, dev->absbit)) { - int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; - input_mt_init_slots(dev, nslot, 0); - } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { - input_set_events_per_packet(dev, 60); - } - } + retval = uinput_validate_absbits(dev); + if (retval < 0) + goto exit; udev->state = UIST_SETUP_COMPLETE; retval = count; -- cgit v0.10.2 From ba4e9a61ad54c438d4c7b655e94e31f23a6fe13f Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sun, 20 Jul 2014 17:27:09 -0700 Subject: Input: uinput - add UI_GET_VERSION ioctl This ioctl is the counterpart to EVIOCGVERSION and returns the uinput-version the kernel was compiled with. Reviewed-by: Peter Hutterer Signed-off-by: David Herrmann Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 883f045..421e29e 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -723,6 +723,12 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, } switch (cmd) { + case UI_GET_VERSION: + if (put_user(UINPUT_VERSION, + (unsigned int __user *)p)) + retval = -EFAULT; + goto out; + case UI_DEV_CREATE: retval = uinput_create_device(udev); goto out; diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h index 0389b48..baeab83 100644 --- a/include/uapi/linux/uinput.h +++ b/include/uapi/linux/uinput.h @@ -84,6 +84,15 @@ struct uinput_ff_erase { */ #define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 300, len) +/** + * UI_GET_VERSION - Return version of uinput protocol + * + * This writes uinput protocol version implemented by the kernel into + * the integer pointed to by the ioctl argument. The protocol version + * is hard-coded in the kernel and is independent of the uinput device. + */ +#define UI_GET_VERSION _IOR(UINPUT_IOCTL_BASE, 301, unsigned int) + /* * To write a force-feedback-capable driver, the upload_effect * and erase_effect callbacks in input_dev must be implemented. -- cgit v0.10.2 From dd24dcf566d0787297953bcaa3a7739586535a33 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 11:25:55 -0700 Subject: Input: atmel_mxt_ts - initialise IRQ before probing The maXTouch chips use the CHG line to generate status events in bootloader mode, and during configuration download, before there is enough information to configure the input device. Therefore set up the interrupt handler earlier. However, this introduces states where parts of the interrupt processing must not run. Use data->object_table as a way to tell whether the chip information is valid, and data->input_dev as a way to tell whether it is valid to generate input report. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 6e0b4a2..02c374d 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -764,6 +764,12 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) if (status & MXT_T6_STATUS_RESET) complete(&data->reset_completion); + } else if (!data->input_dev) { + /* + * do not report events if input device + * is not yet registered + */ + mxt_dump_message(dev, &message); } else if (mxt_is_T9_message(data, &message)) { int id = reportid - data->T9_reportid_min; mxt_input_touchevent(data, &message, id); @@ -792,6 +798,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } + if (!data->object_table) + return IRQ_HANDLED; + return mxt_process_messages_until_invalid(data); } @@ -942,6 +951,19 @@ static int mxt_make_highchg(struct mxt_data *data) return 0; } +static int mxt_acquire_irq(struct mxt_data *data) +{ + int error; + + enable_irq(data->irq); + + error = mxt_make_highchg(data); + if (error) + return error; + + return 0; +} + static int mxt_get_info(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -960,20 +982,29 @@ static int mxt_get_object_table(struct mxt_data *data) { struct i2c_client *client = data->client; size_t table_size; + struct mxt_object *object_table; int error; int i; u8 reportid; table_size = data->info.object_num * sizeof(struct mxt_object); + object_table = kzalloc(table_size, GFP_KERNEL); + if (!object_table) { + dev_err(&data->client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + error = __mxt_read_reg(client, MXT_OBJECT_START, table_size, - data->object_table); - if (error) + object_table); + if (error) { + kfree(object_table); return error; + } /* Valid Report IDs start counting from 1 */ reportid = 1; for (i = 0; i < data->info.object_num; i++) { - struct mxt_object *object = data->object_table + i; + struct mxt_object *object = object_table + i; u8 min_id, max_id; le16_to_cpus(&object->start_address); @@ -1009,6 +1040,8 @@ static int mxt_get_object_table(struct mxt_data *data) } } + data->object_table = object_table; + return 0; } @@ -1080,21 +1113,17 @@ static int mxt_initialize(struct mxt_data *data) if (error) return error; - data->object_table = kcalloc(info->object_num, - sizeof(struct mxt_object), - GFP_KERNEL); - if (!data->object_table) { - dev_err(&client->dev, "Failed to allocate memory\n"); - return -ENOMEM; - } - /* Get object table information */ error = mxt_get_object_table(data); if (error) { dev_err(&client->dev, "Error %d reading object table\n", error); - goto err_free_object_table; + return error; } + mxt_acquire_irq(data); + if (error) + goto err_free_object_table; + /* Check register init values */ error = mxt_check_reg_init(data); if (error) { @@ -1345,11 +1374,7 @@ static ssize_t mxt_update_fw_store(struct device *dev, mxt_free_object_table(data); - mxt_initialize(data); - - enable_irq(data->irq); - - error = mxt_make_highchg(data); + error = mxt_initialize(data); if (error) return error; } @@ -1446,9 +1471,26 @@ static int mxt_probe(struct i2c_client *client, init_completion(&data->reset_completion); init_completion(&data->crc_completion); + error = request_threaded_irq(client->irq, NULL, mxt_interrupt, + pdata->irqflags | IRQF_ONESHOT, + client->name, data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + disable_irq(client->irq); + + error = input_register_device(input_dev); + if (error) { + dev_err(&client->dev, "Error %d registering input device\n", + error); + goto err_free_irq; + } + error = mxt_initialize(data); if (error) - goto err_free_mem; + goto err_unregister_device; __set_bit(EV_ABS, input_dev->evbit); __set_bit(EV_KEY, input_dev->evbit); @@ -1499,25 +1541,6 @@ static int mxt_probe(struct i2c_client *client, input_set_drvdata(input_dev, data); i2c_set_clientdata(client, data); - error = request_threaded_irq(client->irq, NULL, mxt_interrupt, - pdata->irqflags | IRQF_ONESHOT, - client->name, data); - if (error) { - dev_err(&client->dev, "Failed to register interrupt\n"); - goto err_free_object; - } - - error = mxt_make_highchg(data); - if (error) - goto err_free_irq; - - error = input_register_device(input_dev); - if (error) { - dev_err(&client->dev, "Error %d registering input device\n", - error); - goto err_free_irq; - } - error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group); if (error) { dev_err(&client->dev, "Failure %d creating sysfs group\n", @@ -1530,10 +1553,10 @@ static int mxt_probe(struct i2c_client *client, err_unregister_device: input_unregister_device(input_dev); input_dev = NULL; -err_free_irq: - free_irq(client->irq, data); err_free_object: kfree(data->object_table); +err_free_irq: + free_irq(client->irq, data); err_free_mem: input_free_device(input_dev); kfree(data); -- cgit v0.10.2 From 7a53d60926714541e2250b7c55100883cdcaf787 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:21:26 -0700 Subject: Input: atmel_mxt_ts - move input device init into separate function It is useful to initialise the input device later: - Screen parameters may not be not known yet, for instance if waiting for firmware loader to return. - Device may be in bootloader mode on probe (but could still be recovered by firmware download). In addition, later devices have a different touchscreen object (T100) which requires handling differently. This also reduces the complexity of the probe function. Signed-off-by: Nick Dyer Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 02c374d..a248414 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1047,6 +1047,9 @@ static int mxt_get_object_table(struct mxt_data *data) static void mxt_free_object_table(struct mxt_data *data) { + input_unregister_device(data->input_dev); + data->input_dev = NULL; + kfree(data->object_table); data->object_table = NULL; data->T6_reportid = 0; @@ -1103,6 +1106,102 @@ static int mxt_read_t9_resolution(struct mxt_data *data) return 0; } +static int mxt_input_open(struct input_dev *dev); +static void mxt_input_close(struct input_dev *dev); + +static int mxt_initialize_t9_input_device(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + const struct mxt_platform_data *pdata = data->pdata; + struct input_dev *input_dev; + int error; + unsigned int num_mt_slots; + unsigned int mt_flags = 0; + int i; + + error = mxt_read_t9_resolution(data); + if (error) + dev_warn(dev, "Failed to initialize T9 resolution\n"); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + input_dev->name = "Atmel maXTouch Touchscreen"; + input_dev->phys = data->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = dev; + input_dev->open = mxt_input_open; + input_dev->close = mxt_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + if (pdata->t19_num_keys) { + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + for (i = 0; i < pdata->t19_num_keys; i++) + if (pdata->t19_keymap[i] != KEY_RESERVED) + input_set_capability(input_dev, EV_KEY, + pdata->t19_keymap[i]); + + mt_flags |= INPUT_MT_POINTER; + + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + MXT_PIXELS_PER_MM); + + input_dev->name = "Atmel maXTouch Touchpad"; + } + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, 255, 0, 0); + + /* For multi touch */ + num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; + error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); + if (error) { + dev_err(dev, "Error %d initialising slots\n", error); + goto err_free_mem; + } + + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, MXT_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); + + input_set_drvdata(input_dev, data); + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Error %d registering input device\n", error); + goto err_free_mem; + } + + data->input_dev = input_dev; + + return 0; + +err_free_mem: + input_free_device(input_dev); + return error; +} + static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -1132,11 +1231,9 @@ static int mxt_initialize(struct mxt_data *data) goto err_free_object_table; } - error = mxt_read_t9_resolution(data); - if (error) { - dev_err(&client->dev, "Failed to initialize T9 resolution\n"); + error = mxt_initialize_t9_input_device(data); + if (error) goto err_free_object_table; - } dev_info(&client->dev, "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", @@ -1432,40 +1529,26 @@ static void mxt_input_close(struct input_dev *dev) static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev); struct mxt_data *data; - struct input_dev *input_dev; + const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev); int error; - unsigned int num_mt_slots; - unsigned int mt_flags = 0; - int i; if (!pdata) return -EINVAL; data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!data || !input_dev) { + if (!data) { dev_err(&client->dev, "Failed to allocate memory\n"); - error = -ENOMEM; - goto err_free_mem; + return -ENOMEM; } - input_dev->name = "Atmel maXTouch Touchscreen"; snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0", client->adapter->nr, client->addr); - input_dev->phys = data->phys; - - input_dev->id.bustype = BUS_I2C; - input_dev->dev.parent = &client->dev; - input_dev->open = mxt_input_open; - input_dev->close = mxt_input_close; - data->client = client; - data->input_dev = input_dev; data->pdata = pdata; data->irq = client->irq; + i2c_set_clientdata(client, data); init_completion(&data->bl_completion); init_completion(&data->reset_completion); @@ -1481,84 +1564,24 @@ static int mxt_probe(struct i2c_client *client, disable_irq(client->irq); - error = input_register_device(input_dev); - if (error) { - dev_err(&client->dev, "Error %d registering input device\n", - error); - goto err_free_irq; - } - error = mxt_initialize(data); if (error) - goto err_unregister_device; - - __set_bit(EV_ABS, input_dev->evbit); - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); - - if (pdata->t19_num_keys) { - __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); - - for (i = 0; i < pdata->t19_num_keys; i++) - if (pdata->t19_keymap[i] != KEY_RESERVED) - input_set_capability(input_dev, EV_KEY, - pdata->t19_keymap[i]); - - mt_flags |= INPUT_MT_POINTER; - - input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_X, - MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_Y, - MXT_PIXELS_PER_MM); - - input_dev->name = "Atmel maXTouch Touchpad"; - } - - /* For single touch */ - input_set_abs_params(input_dev, ABS_X, - 0, data->max_x, 0, 0); - input_set_abs_params(input_dev, ABS_Y, - 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, - 0, 255, 0, 0); - - /* For multi touch */ - num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; - error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); - if (error) - goto err_free_object; - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - 0, MXT_MAX_AREA, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_X, - 0, data->max_x, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, - 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_MT_PRESSURE, - 0, 255, 0, 0); - - input_set_drvdata(input_dev, data); - i2c_set_clientdata(client, data); + goto err_free_irq; error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group); if (error) { dev_err(&client->dev, "Failure %d creating sysfs group\n", error); - goto err_unregister_device; + goto err_free_object; } return 0; -err_unregister_device: - input_unregister_device(input_dev); - input_dev = NULL; err_free_object: kfree(data->object_table); err_free_irq: free_irq(client->irq, data); err_free_mem: - input_free_device(input_dev); kfree(data); return error; } -- cgit v0.10.2 From b735fbe064a0a64d848e3002f41b7e5f657d5665 Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Wed, 23 Jul 2014 12:22:27 -0700 Subject: Input: atmel_mxt_ts - set pointer emulation on touchpads Touchpads are pointers, so make sure to pass the correct values to input_mt_report_pointer_emulation(). Without this, tap-to-click doesn't work. Signed-off-by: Benson Leung Signed-off-by: Stephen Warren Signed-off-by: Nick Dyer Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index a248414..31113c3 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -654,10 +654,11 @@ static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) } } -static void mxt_input_sync(struct input_dev *input_dev) +static void mxt_input_sync(struct mxt_data *data) { - input_mt_report_pointer_emulation(input_dev, false); - input_sync(input_dev); + input_mt_report_pointer_emulation(data->input_dev, + data->pdata->t19_num_keys); + input_sync(data->input_dev); } static void mxt_input_touchevent(struct mxt_data *data, @@ -707,7 +708,7 @@ static void mxt_input_touchevent(struct mxt_data *data, if (status & MXT_T9_RELEASE) { input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0); - mxt_input_sync(input_dev); + mxt_input_sync(data); } /* Touch active */ @@ -783,7 +784,7 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) } while (reportid != 0xff); if (update_input) - mxt_input_sync(data->input_dev); + mxt_input_sync(data); return IRQ_HANDLED; } -- cgit v0.10.2 From 78188be3e5dd59cc2f67bf4cf573e579da186d39 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 23 Jul 2014 12:23:23 -0700 Subject: Input: atmel_mxt_ts - implement device tree support Signed-off-by: Stephen Warren Signed-off-by: Nick Dyer Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt new file mode 100644 index 0000000..baef432 --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -0,0 +1,25 @@ +Atmel maXTouch touchscreen/touchpad + +Required properties: +- compatible: + atmel,maxtouch + +- reg: The I2C address of the device + +- interrupts: The sink for the touchpad's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- linux,gpio-keymap: An array of up to 4 entries indicating the Linux + keycode generated by each GPIO. Linux keycodes are defined in + . + +Example: + + touch@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = ; + }; diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 31113c3..4317273 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -22,6 +22,7 @@ #include #include #include +#include #include /* Version */ @@ -1527,15 +1528,65 @@ static void mxt_input_close(struct input_dev *dev) mxt_stop(data); } -static int mxt_probe(struct i2c_client *client, - const struct i2c_device_id *id) +#ifdef CONFIG_OF +static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +{ + struct mxt_platform_data *pdata; + u32 *keymap; + u32 keycode; + int proplen, i, ret; + + if (!client->dev.of_node) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + if (of_find_property(client->dev.of_node, "linux,gpio-keymap", + &proplen)) { + pdata->t19_num_keys = proplen / sizeof(u32); + + keymap = devm_kzalloc(&client->dev, + pdata->t19_num_keys * sizeof(keymap[0]), + GFP_KERNEL); + if (!keymap) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < pdata->t19_num_keys; i++) { + ret = of_property_read_u32_index(client->dev.of_node, + "linux,gpio-keymap", i, &keycode); + if (ret) + keycode = KEY_RESERVED; + + keymap[i] = keycode; + } + + pdata->t19_keymap = keymap; + } + + return pdata; +} +#else +static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +{ + dev_dbg(&client->dev, "No platform data specified\n"); + return ERR_PTR(-EINVAL); +} +#endif + +static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct mxt_data *data; - const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev); + const struct mxt_platform_data *pdata; int error; - if (!pdata) - return -EINVAL; + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + pdata = mxt_parse_dt(client); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); if (!data) { @@ -1638,6 +1689,12 @@ static int mxt_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); +static const struct of_device_id mxt_of_match[] = { + { .compatible = "atmel,maxtouch", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mxt_of_match); + static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, @@ -1651,6 +1708,7 @@ static struct i2c_driver mxt_driver = { .driver = { .name = "atmel_mxt_ts", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mxt_of_match), .pm = &mxt_pm_ops, }, .probe = mxt_probe, -- cgit v0.10.2 From 50a77c658b80e7e3303e3bcec195b30e2b62d513 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:38:48 -0700 Subject: Input: atmel_mxt_ts - download device config using firmware loader The existing implementation which encodes the configuration as a binary blob in platform data is unsatisfactory since it requires a kernel recompile for the configuration to be changed, and it doesn't deal well with firmware changes that move values around on the chip. Atmel define an ASCII format for the configuration which can be exported from their tools. This patch implements a parser for that format which loads the configuration via the firmware loader and sends it to the MXT chip. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 4317273..c6b5e7d 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2,6 +2,7 @@ * Atmel maXTouch Touchscreen driver * * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Copyright (C) 2011-2014 Atmel Corporation * Copyright (C) 2012 Google, Inc. * * Author: Joonyoung Shim @@ -30,8 +31,10 @@ #define MXT_VER_21 21 #define MXT_VER_22 22 -/* Firmware */ +/* Firmware files */ #define MXT_FW_NAME "maxtouch.fw" +#define MXT_CFG_NAME "maxtouch.cfg" +#define MXT_CFG_MAGIC "OBP_RAW V1" /* Registers */ #define MXT_INFO 0x00 @@ -298,37 +301,6 @@ static bool mxt_object_readable(unsigned int type) } } -static bool mxt_object_writable(unsigned int type) -{ - switch (type) { - case MXT_GEN_COMMAND_T6: - case MXT_GEN_POWER_T7: - case MXT_GEN_ACQUIRE_T8: - case MXT_TOUCH_MULTI_T9: - case MXT_TOUCH_KEYARRAY_T15: - case MXT_TOUCH_PROXIMITY_T23: - case MXT_TOUCH_PROXKEY_T52: - case MXT_PROCI_GRIPFACE_T20: - case MXT_PROCG_NOISE_T22: - case MXT_PROCI_ONETOUCH_T24: - case MXT_PROCI_TWOTOUCH_T27: - case MXT_PROCI_GRIP_T40: - case MXT_PROCI_PALM_T41: - case MXT_PROCI_TOUCHSUPPRESSION_T42: - case MXT_PROCI_STYLUS_T47: - case MXT_PROCG_NOISESUPPRESSION_T48: - case MXT_SPT_COMMSCONFIG_T18: - case MXT_SPT_GPIOPWM_T19: - case MXT_SPT_SELFTEST_T25: - case MXT_SPT_CTECONFIG_T28: - case MXT_SPT_DIGITIZER_T43: - case MXT_SPT_CTECONFIG_T46: - return true; - default: - return false; - } -} - static void mxt_dump_message(struct device *dev, struct mxt_message *message) { @@ -606,7 +578,7 @@ mxt_get_object(struct mxt_data *data, u8 type) return object; } - dev_err(&data->client->dev, "Invalid object type T%u\n", type); + dev_warn(&data->client->dev, "Invalid object type T%u\n", type); return NULL; } @@ -877,58 +849,197 @@ static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value) mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT); } -static int mxt_check_reg_init(struct mxt_data *data) +/* + * mxt_update_cfg - download configuration to chip + * + * Atmel Raw Config File Format + * + * The first four lines of the raw config file contain: + * 1) Version + * 2) Chip ID Information (first 7 bytes of device memory) + * 3) Chip Information Block 24-bit CRC Checksum + * 4) Chip Configuration 24-bit CRC Checksum + * + * The rest of the file consists of one line per object instance: + * + * + * - 2-byte object type as hex + * - 2-byte object instance number as hex + * - 2-byte object size as hex + * - array of 1-byte hex values + */ +static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) { - const struct mxt_platform_data *pdata = data->pdata; - struct mxt_object *object; struct device *dev = &data->client->dev; - int index = 0; - int i, size; + struct mxt_info cfg_info; + struct mxt_object *object; int ret; + int offset; + int pos; + int i; + u32 info_crc, config_crc; + unsigned int type, instance, size; + u8 val; + u16 reg; - if (!pdata->config) { - dev_dbg(dev, "No cfg data defined, skipping reg init\n"); - return 0; + mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); + + if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) { + dev_err(dev, "Unrecognised config file\n"); + ret = -EINVAL; + goto release; } - mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); + pos = strlen(MXT_CFG_MAGIC); + + /* Load information block and check */ + for (i = 0; i < sizeof(struct mxt_info); i++) { + ret = sscanf(cfg->data + pos, "%hhx%n", + (unsigned char *)&cfg_info + i, + &offset); + if (ret != 1) { + dev_err(dev, "Bad format\n"); + ret = -EINVAL; + goto release; + } - if (data->config_crc == pdata->config_crc) { - dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc); - return 0; + pos += offset; + } + + if (cfg_info.family_id != data->info.family_id) { + dev_err(dev, "Family ID mismatch!\n"); + ret = -EINVAL; + goto release; } - dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n", - data->config_crc, pdata->config_crc); + if (cfg_info.variant_id != data->info.variant_id) { + dev_err(dev, "Variant ID mismatch!\n"); + ret = -EINVAL; + goto release; + } - for (i = 0; i < data->info.object_num; i++) { - object = data->object_table + i; + if (cfg_info.version != data->info.version) + dev_err(dev, "Warning: version mismatch!\n"); - if (!mxt_object_writable(object->type)) + if (cfg_info.build != data->info.build) + dev_err(dev, "Warning: build num mismatch!\n"); + + ret = sscanf(cfg->data + pos, "%x%n", &info_crc, &offset); + if (ret != 1) { + dev_err(dev, "Bad format: failed to parse Info CRC\n"); + ret = -EINVAL; + goto release; + } + pos += offset; + + /* Check config CRC */ + ret = sscanf(cfg->data + pos, "%x%n", &config_crc, &offset); + if (ret != 1) { + dev_err(dev, "Bad format: failed to parse Config CRC\n"); + ret = -EINVAL; + goto release; + } + pos += offset; + + if (data->config_crc == config_crc) { + dev_dbg(dev, "Config CRC 0x%06X: OK\n", config_crc); + ret = 0; + goto release; + } + + dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n", + data->config_crc, config_crc); + + while (pos < cfg->size) { + /* Read type, instance, length */ + ret = sscanf(cfg->data + pos, "%x %x %x%n", + &type, &instance, &size, &offset); + if (ret == 0) { + /* EOF */ + ret = 1; + goto release; + } else if (ret != 3) { + dev_err(dev, "Bad format: failed to parse object\n"); + ret = -EINVAL; + goto release; + } + pos += offset; + + object = mxt_get_object(data, type); + if (!object) { + /* Skip object */ + for (i = 0; i < size; i++) { + ret = sscanf(cfg->data + pos, "%hhx%n", + &val, + &offset); + pos += offset; + } continue; + } - size = mxt_obj_size(object) * mxt_obj_instances(object); - if (index + size > pdata->config_length) { - dev_err(dev, "Not enough config data!\n"); - return -EINVAL; + if (size > mxt_obj_size(object)) { + dev_err(dev, "Discarding %zu byte(s) in T%u\n", + size - mxt_obj_size(object), type); } - ret = __mxt_write_reg(data->client, object->start_address, - size, &pdata->config[index]); - if (ret) - return ret; - index += size; + if (instance >= mxt_obj_instances(object)) { + dev_err(dev, "Object instances exceeded!\n"); + ret = -EINVAL; + goto release; + } + + reg = object->start_address + mxt_obj_size(object) * instance; + + for (i = 0; i < size; i++) { + ret = sscanf(cfg->data + pos, "%hhx%n", + &val, + &offset); + if (ret != 1) { + dev_err(dev, "Bad format in T%d\n", type); + ret = -EINVAL; + goto release; + } + pos += offset; + + if (i > mxt_obj_size(object)) + continue; + + ret = mxt_write_reg(data->client, reg + i, val); + if (ret) + goto release; + + } + + /* + * If firmware is upgraded, new bytes may be added to end of + * objects. It is generally forward compatible to zero these + * bytes - previous behaviour will be retained. However + * this does invalidate the CRC and will force a config + * download every time until the configuration is updated. + */ + if (size < mxt_obj_size(object)) { + dev_info(dev, "Zeroing %zu byte(s) in T%d\n", + mxt_obj_size(object) - size, type); + + for (i = size + 1; i < mxt_obj_size(object); i++) { + ret = mxt_write_reg(data->client, reg + i, 0); + if (ret) + goto release; + } + } } mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE); ret = mxt_soft_reset(data); if (ret) - return ret; + goto release; dev_info(dev, "Config successfully updated\n"); - return 0; +release: + release_firmware(cfg); + return ret; } static int mxt_make_highchg(struct mxt_data *data) @@ -1204,10 +1315,17 @@ err_free_mem: return error; } +static int mxt_configure_objects(struct mxt_data *data, + const struct firmware *cfg); + +static void mxt_config_cb(const struct firmware *cfg, void *ctx) +{ + mxt_configure_objects(ctx, cfg); +} + static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; - struct mxt_info *info = &data->info; int error; error = mxt_get_info(data); @@ -1225,28 +1343,40 @@ static int mxt_initialize(struct mxt_data *data) if (error) goto err_free_object_table; - /* Check register init values */ - error = mxt_check_reg_init(data); - if (error) { - dev_err(&client->dev, "Error %d initializing configuration\n", - error); - goto err_free_object_table; + request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME, + &data->client->dev, GFP_KERNEL, data, + mxt_config_cb); + + return 0; + +err_free_object_table: + mxt_free_object_table(data); + return error; +} + +static int mxt_configure_objects(struct mxt_data *data, + const struct firmware *cfg) +{ + struct device *dev = &data->client->dev; + struct mxt_info *info = &data->info; + int error; + + if (cfg) { + error = mxt_update_cfg(data, cfg); + if (error) + dev_warn(dev, "Error %d updating config\n", error); } error = mxt_initialize_t9_input_device(data); if (error) - goto err_free_object_table; + return error; - dev_info(&client->dev, + dev_info(dev, "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", info->family_id, info->variant_id, info->version >> 4, info->version & 0xf, info->build, info->object_num); return 0; - -err_free_object_table: - mxt_free_object_table(data); - return error; } /* Firmware Version is returned as Major.Minor.Build */ diff --git a/drivers/platform/chrome/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c index 7f1a2e2..67b316b 100644 --- a/drivers/platform/chrome/chromeos_laptop.c +++ b/drivers/platform/chrome/chromeos_laptop.c @@ -97,8 +97,6 @@ static struct mxt_platform_data atmel_224s_tp_platform_data = { .irqflags = IRQF_TRIGGER_FALLING, .t19_num_keys = ARRAY_SIZE(mxt_t19_keys), .t19_keymap = mxt_t19_keys, - .config = NULL, - .config_length = 0, }; static struct i2c_board_info atmel_224s_tp_device = { @@ -109,8 +107,6 @@ static struct i2c_board_info atmel_224s_tp_device = { static struct mxt_platform_data atmel_1664s_platform_data = { .irqflags = IRQF_TRIGGER_FALLING, - .config = NULL, - .config_length = 0, }; static struct i2c_board_info atmel_1664s_device = { diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h index 3891dc1..02bf6ea 100644 --- a/include/linux/i2c/atmel_mxt_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -17,9 +17,6 @@ /* The platform data for the Atmel maXTouch touchscreen driver */ struct mxt_platform_data { - const u8 *config; - size_t config_length; - u32 config_crc; unsigned long irqflags; u8 t19_num_keys; const unsigned int *t19_keymap; -- cgit v0.10.2 From 4ce6fa017f48e892cc3465caa7fbb3dead5a6ca6 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:40:09 -0700 Subject: Input: atmel_mxt_ts - calculate and check CRC in config file By validating the checksum, we can identify if the configuration is corrupt. In addition, this patch writes the configuration in a short series of block writes rather than as many individual values. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index c6b5e7d..d2feb9c 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -48,6 +48,8 @@ #define MXT_OBJECT_START 0x07 #define MXT_OBJECT_SIZE 6 +#define MXT_INFO_CHECKSUM_SIZE 3 +#define MXT_MAX_BLOCK_WRITE 256 /* Object types */ #define MXT_DEBUG_DIAGNOSTIC_T37 37 @@ -238,12 +240,15 @@ struct mxt_data { unsigned int max_x; unsigned int max_y; bool in_bootloader; + u16 mem_size; u32 config_crc; + u32 info_crc; u8 bootloader_addr; /* Cached parameters from object table */ u8 T6_reportid; u16 T6_address; + u16 T7_address; u8 T9_reportid_min; u8 T9_reportid_max; u8 T19_reportid; @@ -849,6 +854,45 @@ static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value) mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT); } +static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte) +{ + static const unsigned int crcpoly = 0x80001B; + u32 result; + u32 data_word; + + data_word = (secondbyte << 8) | firstbyte; + result = ((*crc << 1) ^ data_word); + + if (result & 0x1000000) + result ^= crcpoly; + + *crc = result; +} + +static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off) +{ + u32 crc = 0; + u8 *ptr = base + start_off; + u8 *last_val = base + end_off - 1; + + if (end_off < start_off) + return -EINVAL; + + while (ptr < last_val) { + mxt_calc_crc24(&crc, *ptr, *(ptr + 1)); + ptr += 2; + } + + /* if len is odd, fill the last byte with 0 */ + if (ptr == last_val) + mxt_calc_crc24(&crc, *ptr, 0); + + /* Mask to 24-bit */ + crc &= 0x00FFFFFF; + + return crc; +} + /* * mxt_update_cfg - download configuration to chip * @@ -875,9 +919,13 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) struct mxt_object *object; int ret; int offset; - int pos; + int data_pos; + int byte_offset; int i; - u32 info_crc, config_crc; + int cfg_start_ofs; + u32 info_crc, config_crc, calculated_crc; + u8 *config_mem; + size_t config_mem_size; unsigned int type, instance, size; u8 val; u16 reg; @@ -890,11 +938,11 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) goto release; } - pos = strlen(MXT_CFG_MAGIC); + data_pos = strlen(MXT_CFG_MAGIC); /* Load information block and check */ for (i = 0; i < sizeof(struct mxt_info); i++) { - ret = sscanf(cfg->data + pos, "%hhx%n", + ret = sscanf(cfg->data + data_pos, "%hhx%n", (unsigned char *)&cfg_info + i, &offset); if (ret != 1) { @@ -903,7 +951,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) goto release; } - pos += offset; + data_pos += offset; } if (cfg_info.family_id != data->info.family_id) { @@ -918,125 +966,188 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) goto release; } - if (cfg_info.version != data->info.version) - dev_err(dev, "Warning: version mismatch!\n"); - - if (cfg_info.build != data->info.build) - dev_err(dev, "Warning: build num mismatch!\n"); - - ret = sscanf(cfg->data + pos, "%x%n", &info_crc, &offset); + /* Read CRCs */ + ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset); if (ret != 1) { dev_err(dev, "Bad format: failed to parse Info CRC\n"); ret = -EINVAL; goto release; } - pos += offset; + data_pos += offset; - /* Check config CRC */ - ret = sscanf(cfg->data + pos, "%x%n", &config_crc, &offset); + ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset); if (ret != 1) { dev_err(dev, "Bad format: failed to parse Config CRC\n"); ret = -EINVAL; goto release; } - pos += offset; + data_pos += offset; - if (data->config_crc == config_crc) { - dev_dbg(dev, "Config CRC 0x%06X: OK\n", config_crc); - ret = 0; - goto release; + /* + * The Info Block CRC is calculated over mxt_info and the object + * table. If it does not match then we are trying to load the + * configuration from a different chip or firmware version, so + * the configuration CRC is invalid anyway. + */ + if (info_crc == data->info_crc) { + if (config_crc == 0 || data->config_crc == 0) { + dev_info(dev, "CRC zero, attempting to apply config\n"); + } else if (config_crc == data->config_crc) { + dev_dbg(dev, "Config CRC 0x%06X: OK\n", + data->config_crc); + ret = 0; + goto release; + } else { + dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n", + data->config_crc, config_crc); + } + } else { + dev_warn(dev, + "Warning: Info CRC error - device=0x%06X file=0x%06X\n", + data->info_crc, info_crc); } - dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n", - data->config_crc, config_crc); + /* Malloc memory to store configuration */ + cfg_start_ofs = MXT_OBJECT_START + + data->info.object_num * sizeof(struct mxt_object) + + MXT_INFO_CHECKSUM_SIZE; + config_mem_size = data->mem_size - cfg_start_ofs; + config_mem = kzalloc(config_mem_size, GFP_KERNEL); + if (!config_mem) { + dev_err(dev, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto release; + } - while (pos < cfg->size) { + while (data_pos < cfg->size) { /* Read type, instance, length */ - ret = sscanf(cfg->data + pos, "%x %x %x%n", + ret = sscanf(cfg->data + data_pos, "%x %x %x%n", &type, &instance, &size, &offset); if (ret == 0) { /* EOF */ - ret = 1; - goto release; + break; } else if (ret != 3) { dev_err(dev, "Bad format: failed to parse object\n"); ret = -EINVAL; - goto release; + goto release_mem; } - pos += offset; + data_pos += offset; object = mxt_get_object(data, type); if (!object) { /* Skip object */ for (i = 0; i < size; i++) { - ret = sscanf(cfg->data + pos, "%hhx%n", + ret = sscanf(cfg->data + data_pos, "%hhx%n", &val, &offset); - pos += offset; + data_pos += offset; } continue; } if (size > mxt_obj_size(object)) { - dev_err(dev, "Discarding %zu byte(s) in T%u\n", - size - mxt_obj_size(object), type); + /* + * Either we are in fallback mode due to wrong + * config or config from a later fw version, + * or the file is corrupt or hand-edited. + */ + dev_warn(dev, "Discarding %zu byte(s) in T%u\n", + size - mxt_obj_size(object), type); + } else if (mxt_obj_size(object) > size) { + /* + * If firmware is upgraded, new bytes may be added to + * end of objects. It is generally forward compatible + * to zero these bytes - previous behaviour will be + * retained. However this does invalidate the CRC and + * will force fallback mode until the configuration is + * updated. We warn here but do nothing else - the + * malloc has zeroed the entire configuration. + */ + dev_warn(dev, "Zeroing %zu byte(s) in T%d\n", + mxt_obj_size(object) - size, type); } if (instance >= mxt_obj_instances(object)) { dev_err(dev, "Object instances exceeded!\n"); ret = -EINVAL; - goto release; + goto release_mem; } reg = object->start_address + mxt_obj_size(object) * instance; for (i = 0; i < size; i++) { - ret = sscanf(cfg->data + pos, "%hhx%n", + ret = sscanf(cfg->data + data_pos, "%hhx%n", &val, &offset); if (ret != 1) { dev_err(dev, "Bad format in T%d\n", type); ret = -EINVAL; - goto release; + goto release_mem; } - pos += offset; + data_pos += offset; if (i > mxt_obj_size(object)) continue; - ret = mxt_write_reg(data->client, reg + i, val); - if (ret) - goto release; + byte_offset = reg + i - cfg_start_ofs; + if ((byte_offset >= 0) + && (byte_offset <= config_mem_size)) { + *(config_mem + byte_offset) = val; + } else { + dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n", + reg, object->type, byte_offset); + ret = -EINVAL; + goto release_mem; + } } + } - /* - * If firmware is upgraded, new bytes may be added to end of - * objects. It is generally forward compatible to zero these - * bytes - previous behaviour will be retained. However - * this does invalidate the CRC and will force a config - * download every time until the configuration is updated. - */ - if (size < mxt_obj_size(object)) { - dev_info(dev, "Zeroing %zu byte(s) in T%d\n", - mxt_obj_size(object) - size, type); + /* Calculate crc of the received configs (not the raw config file) */ + if (data->T7_address < cfg_start_ofs) { + dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n", + data->T7_address, cfg_start_ofs); + ret = 0; + goto release_mem; + } - for (i = size + 1; i < mxt_obj_size(object); i++) { - ret = mxt_write_reg(data->client, reg + i, 0); - if (ret) - goto release; - } + calculated_crc = mxt_calculate_crc(config_mem, + data->T7_address - cfg_start_ofs, + config_mem_size); + + if (config_crc > 0 && (config_crc != calculated_crc)) + dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n", + calculated_crc, config_crc); + + /* Write configuration as blocks */ + byte_offset = 0; + while (byte_offset < config_mem_size) { + size = config_mem_size - byte_offset; + + if (size > MXT_MAX_BLOCK_WRITE) + size = MXT_MAX_BLOCK_WRITE; + + ret = __mxt_write_reg(data->client, + cfg_start_ofs + byte_offset, + size, config_mem + byte_offset); + if (ret != 0) { + dev_err(dev, "Config write error, ret=%d\n", ret); + goto release_mem; } + + byte_offset += size; } mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE); ret = mxt_soft_reset(data); if (ret) - goto release; + goto release_mem; dev_info(dev, "Config successfully updated\n"); +release_mem: + kfree(config_mem); release: release_firmware(cfg); return ret; @@ -1099,6 +1210,7 @@ static int mxt_get_object_table(struct mxt_data *data) int error; int i; u8 reportid; + u16 end_address; table_size = data->info.object_num * sizeof(struct mxt_object); object_table = kzalloc(table_size, GFP_KERNEL); @@ -1116,6 +1228,7 @@ static int mxt_get_object_table(struct mxt_data *data) /* Valid Report IDs start counting from 1 */ reportid = 1; + data->mem_size = 0; for (i = 0; i < data->info.object_num; i++) { struct mxt_object *object = object_table + i; u8 min_id, max_id; @@ -1143,6 +1256,9 @@ static int mxt_get_object_table(struct mxt_data *data) data->T6_reportid = min_id; data->T6_address = object->start_address; break; + case MXT_GEN_POWER_T7: + data->T7_address = object->start_address; + break; case MXT_TOUCH_MULTI_T9: data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; @@ -1151,6 +1267,12 @@ static int mxt_get_object_table(struct mxt_data *data) data->T19_reportid = min_id; break; } + + end_address = object->start_address + + mxt_obj_size(object) * mxt_obj_instances(object) - 1; + + if (end_address >= data->mem_size) + data->mem_size = end_address + 1; } data->object_table = object_table; -- cgit v0.10.2 From a9fdd1e6de62c3c13046c1424d5ed541d7ee745b Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:41:58 -0700 Subject: Input: atmel_mxt_ts - handle APP_CRC_FAIL on startup If the bootloader on the touchscreen controller fails to initialise the firmware image, it stays in bootloader mode and reports a failure. It is possible to reflash a working firmware image from this state. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index d2feb9c..95e3ef4 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -404,6 +404,30 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) return 0; } +static int mxt_probe_bootloader(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + u8 val; + bool crc_failure; + + ret = mxt_lookup_bootloader_address(data); + if (ret) + return ret; + + ret = mxt_bootloader_read(data, &val, 1); + if (ret) + return ret; + + /* Check app crc fail mode */ + crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL; + + dev_err(dev, "Detected bootloader, status:%02X%s\n", + val, crc_failure ? ", APP_CRC_FAIL" : ""); + + return 0; +} + static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) { struct device *dev = &data->client->dev; @@ -463,6 +487,7 @@ recheck: switch (state) { case MXT_WAITING_BOOTLOAD_CMD: case MXT_WAITING_FRAME_DATA: + case MXT_APP_CRC_FAIL: val &= ~MXT_BOOT_STATUS_MASK; break; case MXT_FRAME_CRC_PASS: @@ -1451,8 +1476,14 @@ static int mxt_initialize(struct mxt_data *data) int error; error = mxt_get_info(data); - if (error) - return error; + if (error) { + error = mxt_probe_bootloader(data); + if (error) + return error; + + data->in_bootloader = true; + return 0; + } /* Get object table information */ error = mxt_get_object_table(data); @@ -1630,15 +1661,19 @@ static int mxt_load_fw(struct device *dev, const char *fn) if (ret) goto release_firmware; - /* Change to the bootloader mode */ - data->in_bootloader = true; + if (!data->in_bootloader) { + /* Change to the bootloader mode */ + data->in_bootloader = true; - ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false); - if (ret) - goto release_firmware; + ret = mxt_t6_command(data, MXT_COMMAND_RESET, + MXT_BOOT_VALUE, false); + if (ret) + goto release_firmware; - msleep(MXT_RESET_TIME); + msleep(MXT_RESET_TIME); + } + mxt_free_object_table(data); reinit_completion(&data->bl_completion); ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD); @@ -1723,8 +1758,6 @@ static ssize_t mxt_update_fw_store(struct device *dev, } else { dev_info(dev, "The firmware update succeeded\n"); - mxt_free_object_table(data); - error = mxt_initialize(data); if (error) return error; -- cgit v0.10.2 From 385deb962aa26a324cad2e85352624b20c2ba52f Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:42:40 -0700 Subject: Input: atmel_mxt_ts - handle bootloader previously unlocked On a warm probe, the device might be in a state where an flash operation was not completed. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 95e3ef4..bc1d276 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -449,14 +449,15 @@ static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) } } -static int mxt_check_bootloader(struct mxt_data *data, unsigned int state) +static int mxt_check_bootloader(struct mxt_data *data, unsigned int state, + bool wait) { struct device *dev = &data->client->dev; u8 val; int ret; recheck: - if (state != MXT_WAITING_BOOTLOAD_CMD) { + if (wait) { /* * In application update mode, the interrupt * line signals state transitions. We must wait for the @@ -1676,15 +1677,23 @@ static int mxt_load_fw(struct device *dev, const char *fn) mxt_free_object_table(data); reinit_completion(&data->bl_completion); - ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD); - if (ret) - goto disable_irq; + ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false); + if (ret) { + /* Bootloader may still be unlocked from previous attempt */ + ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false); + if (ret) + goto disable_irq; + } else { + dev_info(dev, "Unlocking bootloader\n"); - /* Unlock bootloader */ - mxt_unlock_bootloader(data); + /* Unlock bootloader */ + ret = mxt_unlock_bootloader(data); + if (ret) + goto disable_irq; + } while (pos < fw->size) { - ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA); + ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true); if (ret) goto disable_irq; @@ -1698,7 +1707,7 @@ static int mxt_load_fw(struct device *dev, const char *fn) if (ret) goto disable_irq; - ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS); + ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true); if (ret) { retry++; -- cgit v0.10.2 From 44a0bab2154f07d6cb7ec6d929f6875a1f768f41 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:45:26 -0700 Subject: Input: atmel_mxt_ts - add bootloader addresses for new chips Later chips (for example mXT1664S) different mappings for bootloader addresses. This means that we must look at the family ID to determine which address to use. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index bc1d276..dc8133d 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -387,6 +387,12 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) switch (appmode) { case 0x4a: case 0x4b: + /* Chips after 1664S use different scheme */ + if (data->info.family_id >= 0xa2) { + bootloader = appmode - 0x24; + break; + } + /* Fall through for normal case */ case 0x4c: case 0x4d: case 0x5a: -- cgit v0.10.2 From 8efaa5e5a95170fa126798c7a48f0747fdb29862 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:45:49 -0700 Subject: Input: atmel_mxt_ts - recover from bootloader on probe The MXT device may be in bootloader mode on probe, due to: 1) APP CRC failure, either: a) flash corruption b) bad power or other intermittent problem while checking CRC 2) If the device has been reset 10 or more times without accessing comms 3) Warm probe, device was in bootloader mode already This code attempts to recover from 1(b) and 3. There is an additional complexity: we have to try two possible bootloader addresses because the mapping is not one-to-one and we don't know the exact model yet. Signed-off-by: Nick Dyer Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index dc8133d..869065c 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -379,7 +379,7 @@ static int mxt_bootloader_write(struct mxt_data *data, return ret; } -static int mxt_lookup_bootloader_address(struct mxt_data *data) +static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry) { u8 appmode = data->client->addr; u8 bootloader; @@ -388,7 +388,7 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) case 0x4a: case 0x4b: /* Chips after 1664S use different scheme */ - if (data->info.family_id >= 0xa2) { + if (retry || data->info.family_id >= 0xa2) { bootloader = appmode - 0x24; break; } @@ -410,14 +410,14 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) return 0; } -static int mxt_probe_bootloader(struct mxt_data *data) +static int mxt_probe_bootloader(struct mxt_data *data, bool retry) { struct device *dev = &data->client->dev; int ret; u8 val; bool crc_failure; - ret = mxt_lookup_bootloader_address(data); + ret = mxt_lookup_bootloader_address(data, retry); if (ret) return ret; @@ -518,13 +518,18 @@ recheck: return 0; } -static int mxt_unlock_bootloader(struct mxt_data *data) +static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock) { int ret; u8 buf[2]; - buf[0] = MXT_UNLOCK_CMD_LSB; - buf[1] = MXT_UNLOCK_CMD_MSB; + if (unlock) { + buf[0] = MXT_UNLOCK_CMD_LSB; + buf[1] = MXT_UNLOCK_CMD_MSB; + } else { + buf[0] = 0x01; + buf[1] = 0x01; + } ret = mxt_bootloader_write(data, buf, 2); if (ret) @@ -1481,15 +1486,40 @@ static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; int error; + bool alt_bootloader_addr = false; + bool retry = false; +retry_info: error = mxt_get_info(data); if (error) { - error = mxt_probe_bootloader(data); - if (error) - return error; +retry_bootloader: + error = mxt_probe_bootloader(data, alt_bootloader_addr); + if (error) { + if (alt_bootloader_addr) { + /* Chip is not in appmode or bootloader mode */ + return error; + } - data->in_bootloader = true; - return 0; + dev_info(&client->dev, "Trying alternate bootloader address\n"); + alt_bootloader_addr = true; + goto retry_bootloader; + } else { + if (retry) { + dev_err(&client->dev, "Could not recover from bootloader mode\n"); + /* + * We can reflash from this state, so do not + * abort init + */ + data->in_bootloader = true; + return 0; + } + + /* Attempt to exit bootloader into app mode */ + mxt_send_bootloader_cmd(data, false); + msleep(MXT_FW_RESET_TIME); + retry = true; + goto retry_info; + } } /* Get object table information */ @@ -1664,10 +1694,6 @@ static int mxt_load_fw(struct device *dev, const char *fn) if (ret) goto release_firmware; - ret = mxt_lookup_bootloader_address(data); - if (ret) - goto release_firmware; - if (!data->in_bootloader) { /* Change to the bootloader mode */ data->in_bootloader = true; @@ -1678,6 +1704,13 @@ static int mxt_load_fw(struct device *dev, const char *fn) goto release_firmware; msleep(MXT_RESET_TIME); + + /* Do not need to scan since we know family ID */ + ret = mxt_lookup_bootloader_address(data, 0); + if (ret) + goto release_firmware; + } else { + enable_irq(data->irq); } mxt_free_object_table(data); @@ -1693,7 +1726,7 @@ static int mxt_load_fw(struct device *dev, const char *fn) dev_info(dev, "Unlocking bootloader\n"); /* Unlock bootloader */ - ret = mxt_unlock_bootloader(data); + ret = mxt_send_bootloader_cmd(data, true); if (ret) goto disable_irq; } -- cgit v0.10.2 From 5f3f9bc2b1f3a09e732dfb5faad9cd3f42bd0328 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:46:55 -0700 Subject: Input: atmel_mxt_ts - add support for dynamic message size The T5 object may have various sizes depending on the objects used on the particular maXTouch chip and firmware version, therefore it can't be hardcoded in the driver. Allocate a buffer on probe instead. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 869065c..215ffe1 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -80,6 +80,9 @@ #define MXT_SPT_MESSAGECOUNT_T44 44 #define MXT_SPT_CTECONFIG_T46 46 +/* MXT_GEN_MESSAGE_T5 object */ +#define MXT_RPTID_NOMSG 0xff + /* MXT_GEN_COMMAND_T6 field */ #define MXT_COMMAND_RESET 0 #define MXT_COMMAND_BACKUPNV 1 @@ -223,11 +226,6 @@ struct mxt_object { u8 num_report_ids; } __packed; -struct mxt_message { - u8 reportid; - u8 message[7]; -}; - /* Each client has this additional data */ struct mxt_data { struct i2c_client *client; @@ -244,8 +242,10 @@ struct mxt_data { u32 config_crc; u32 info_crc; u8 bootloader_addr; + u8 *msg_buf; /* Cached parameters from object table */ + u8 T5_msg_size; u8 T6_reportid; u16 T6_address; u16 T7_address; @@ -306,11 +306,10 @@ static bool mxt_object_readable(unsigned int type) } } -static void mxt_dump_message(struct device *dev, - struct mxt_message *message) +static void mxt_dump_message(struct mxt_data *data, u8 *message) { - dev_dbg(dev, "reportid: %u\tmessage: %*ph\n", - message->reportid, 7, message->message); + dev_dbg(&data->client->dev, "message: %*ph\n", + data->T5_msg_size, message); } static int mxt_wait_for_completion(struct mxt_data *data, @@ -624,8 +623,7 @@ mxt_get_object(struct mxt_data *data, u8 type) return NULL; } -static int mxt_read_message(struct mxt_data *data, - struct mxt_message *message) +static int mxt_read_message(struct mxt_data *data, u8 *message) { struct mxt_object *object; u16 reg; @@ -636,7 +634,7 @@ static int mxt_read_message(struct mxt_data *data, reg = object->start_address; return __mxt_read_reg(data->client, reg, - sizeof(struct mxt_message), message); + data->T5_msg_size, message); } static int mxt_write_object(struct mxt_data *data, @@ -653,7 +651,7 @@ static int mxt_write_object(struct mxt_data *data, return mxt_write_reg(data->client, reg + offset, val); } -static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) +static void mxt_input_button(struct mxt_data *data, u8 *message) { struct input_dev *input = data->input_dev; const struct mxt_platform_data *pdata = data->pdata; @@ -664,7 +662,7 @@ static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) for (i = 0; i < pdata->t19_num_keys; i++) { if (pdata->t19_keymap[i] == KEY_RESERVED) continue; - button = !(message->message[0] & (1 << i)); + button = !(message[1] & (1 << i)); input_report_key(input, pdata->t19_keymap[i], button); } } @@ -676,19 +674,21 @@ static void mxt_input_sync(struct mxt_data *data) input_sync(data->input_dev); } -static void mxt_input_touchevent(struct mxt_data *data, - struct mxt_message *message, int id) +static void mxt_input_touchevent(struct mxt_data *data, u8 *message) { struct device *dev = &data->client->dev; - u8 status = message->message[0]; struct input_dev *input_dev = data->input_dev; + int id; + u8 status; int x; int y; int area; int amplitude; - x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf); - y = (message->message[2] << 4) | ((message->message[3] & 0xf)); + id = message[0] - data->T9_reportid_min; + status = message[1]; + x = (message[2] << 4) | ((message[4] >> 4) & 0xf); + y = (message[3] << 4) | ((message[4] & 0xf)); /* Handle 10/12 bit switching */ if (data->max_x < 1024) @@ -696,8 +696,8 @@ static void mxt_input_touchevent(struct mxt_data *data, if (data->max_y < 1024) y >>= 2; - area = message->message[4]; - amplitude = message->message[5]; + area = message[5]; + amplitude = message[6]; dev_dbg(dev, "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n", @@ -743,28 +743,28 @@ static u16 mxt_extract_T6_csum(const u8 *csum) return csum[0] | (csum[1] << 8) | (csum[2] << 16); } -static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg) +static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg) { - u8 id = msg->reportid; + u8 id = msg[0]; return (id >= data->T9_reportid_min && id <= data->T9_reportid_max); } static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) { - struct mxt_message message; - const u8 *payload = &message.message[0]; + u8 *message = &data->msg_buf[0]; + const u8 *payload = &data->msg_buf[1]; struct device *dev = &data->client->dev; u8 reportid; bool update_input = false; u32 crc; do { - if (mxt_read_message(data, &message)) { + if (mxt_read_message(data, message)) { dev_err(dev, "Failed to read message\n"); return IRQ_NONE; } - reportid = message.reportid; + reportid = message[0]; if (reportid == data->T6_reportid) { u8 status = payload[0]; @@ -785,18 +785,17 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) * do not report events if input device * is not yet registered */ - mxt_dump_message(dev, &message); - } else if (mxt_is_T9_message(data, &message)) { - int id = reportid - data->T9_reportid_min; - mxt_input_touchevent(data, &message, id); + mxt_dump_message(data, message); + } else if (mxt_is_T9_message(data, message)) { + mxt_input_touchevent(data, message); update_input = true; - } else if (message.reportid == data->T19_reportid) { - mxt_input_button(data, &message); + } else if (reportid == data->T19_reportid) { + mxt_input_button(data, message); update_input = true; } else { - mxt_dump_message(dev, &message); + mxt_dump_message(data, message); } - } while (reportid != 0xff); + } while (reportid != MXT_RPTID_NOMSG); if (update_input) mxt_input_sync(data); @@ -1193,16 +1192,15 @@ release: static int mxt_make_highchg(struct mxt_data *data) { struct device *dev = &data->client->dev; - struct mxt_message message; int count = 10; int error; /* Read dummy message to make high CHG pin */ do { - error = mxt_read_message(data, &message); + error = mxt_read_message(data, data->msg_buf); if (error) return error; - } while (message.reportid != 0xff && --count); + } while (data->msg_buf[0] != MXT_RPTID_NOMSG && --count); if (!count) { dev_err(dev, "CHG pin isn't cleared\n"); @@ -1239,6 +1237,23 @@ static int mxt_get_info(struct mxt_data *data) return 0; } +static void mxt_free_object_table(struct mxt_data *data) +{ + input_unregister_device(data->input_dev); + data->input_dev = NULL; + + kfree(data->object_table); + data->object_table = NULL; + kfree(data->msg_buf); + data->msg_buf = NULL; + data->T5_msg_size = 0; + data->T6_reportid = 0; + data->T7_address = 0; + data->T9_reportid_min = 0; + data->T9_reportid_max = 0; + data->T19_reportid = 0; +} + static int mxt_get_object_table(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -1289,6 +1304,9 @@ static int mxt_get_object_table(struct mxt_data *data) min_id, max_id); switch (object->type) { + case MXT_GEN_MESSAGE_T5: + /* CRC not enabled, therefore don't read last byte */ + data->T5_msg_size = mxt_obj_size(object) - 1; case MXT_GEN_COMMAND_T6: data->T6_reportid = min_id; data->T6_address = object->start_address; @@ -1312,22 +1330,20 @@ static int mxt_get_object_table(struct mxt_data *data) data->mem_size = end_address + 1; } + data->msg_buf = kzalloc(data->T5_msg_size, GFP_KERNEL); + if (!data->msg_buf) { + dev_err(&client->dev, "Failed to allocate message buffer\n"); + error = -ENOMEM; + goto free_object_table; + } + data->object_table = object_table; return 0; -} -static void mxt_free_object_table(struct mxt_data *data) -{ - input_unregister_device(data->input_dev); - data->input_dev = NULL; - - kfree(data->object_table); - data->object_table = NULL; - data->T6_reportid = 0; - data->T9_reportid_min = 0; - data->T9_reportid_max = 0; - data->T19_reportid = 0; +free_object_table: + mxt_free_object_table(data); + return error; } static int mxt_read_t9_resolution(struct mxt_data *data) @@ -1963,7 +1979,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; err_free_object: - kfree(data->object_table); + mxt_free_object_table(data); err_free_irq: free_irq(client->irq, data); err_free_mem: @@ -1978,7 +1994,7 @@ static int mxt_remove(struct i2c_client *client) sysfs_remove_group(&client->dev.kobj, &mxt_attr_group); free_irq(data->irq, data); input_unregister_device(data->input_dev); - kfree(data->object_table); + mxt_free_object_table(data); kfree(data); return 0; -- cgit v0.10.2 From 497767d158491521c706f9ae1b805eca2eceb434 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:47:50 -0700 Subject: Input: atmel_mxt_ts - decode T6 status messages By storing the previous T6 status byte multiple debug output of the same status can be suppressed (for example CFGERR). Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 215ffe1..c8c6ac1 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -92,6 +92,11 @@ /* Define for T6 status byte */ #define MXT_T6_STATUS_RESET (1 << 7) +#define MXT_T6_STATUS_OFL (1 << 6) +#define MXT_T6_STATUS_SIGERR (1 << 5) +#define MXT_T6_STATUS_CAL (1 << 4) +#define MXT_T6_STATUS_CFGERR (1 << 3) +#define MXT_T6_STATUS_COMSERR (1 << 2) /* MXT_GEN_POWER_T7 field */ #define MXT_POWER_IDLEACQINT 0 @@ -243,6 +248,7 @@ struct mxt_data { u32 info_crc; u8 bootloader_addr; u8 *msg_buf; + u8 t6_status; /* Cached parameters from object table */ u8 T5_msg_size; @@ -623,6 +629,39 @@ mxt_get_object(struct mxt_data *data, u8 type) return NULL; } +static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) +{ + struct device *dev = &data->client->dev; + u8 status = msg[1]; + u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16); + + complete(&data->crc_completion); + + if (crc != data->config_crc) { + data->config_crc = crc; + dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc); + } + + /* Detect reset */ + if (status & MXT_T6_STATUS_RESET) + complete(&data->reset_completion); + + /* Output debug if status has changed */ + if (status != data->t6_status) + dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n", + status, + status == 0 ? " OK" : "", + status & MXT_T6_STATUS_RESET ? " RESET" : "", + status & MXT_T6_STATUS_OFL ? " OFL" : "", + status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "", + status & MXT_T6_STATUS_CAL ? " CAL" : "", + status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "", + status & MXT_T6_STATUS_COMSERR ? " COMSERR" : ""); + + /* Save current status */ + data->t6_status = status; +} + static int mxt_read_message(struct mxt_data *data, u8 *message) { struct mxt_object *object; @@ -738,11 +777,6 @@ static void mxt_input_touchevent(struct mxt_data *data, u8 *message) } } -static u16 mxt_extract_T6_csum(const u8 *csum) -{ - return csum[0] | (csum[1] << 8) | (csum[2] << 16); -} - static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg) { u8 id = msg[0]; @@ -752,11 +786,9 @@ static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg) static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) { u8 *message = &data->msg_buf[0]; - const u8 *payload = &data->msg_buf[1]; struct device *dev = &data->client->dev; u8 reportid; bool update_input = false; - u32 crc; do { if (mxt_read_message(data, message)) { @@ -767,19 +799,7 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) reportid = message[0]; if (reportid == data->T6_reportid) { - u8 status = payload[0]; - - crc = mxt_extract_T6_csum(&payload[1]); - if (crc != data->config_crc) { - data->config_crc = crc; - complete(&data->crc_completion); - } - - dev_dbg(dev, "Status: %02x Config Checksum: %06x\n", - status, data->config_crc); - - if (status & MXT_T6_STATUS_RESET) - complete(&data->reset_completion); + mxt_proc_t6_messages(data, message); } else if (!data->input_dev) { /* * do not report events if input device -- cgit v0.10.2 From b9b05a89721f05e2db227283ec9f7af804830b01 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:48:13 -0700 Subject: Input: atmel_mxt_ts - split message handler into separate functions This is in preparation for support of the T44 message count object. Also, cache T5 address to avoid lookup on every interrupt cycle. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index c8c6ac1..699de55 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -249,8 +249,10 @@ struct mxt_data { u8 bootloader_addr; u8 *msg_buf; u8 t6_status; + bool update_input; /* Cached parameters from object table */ + u16 T5_address; u8 T5_msg_size; u8 T6_reportid; u16 T6_address; @@ -662,20 +664,6 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) data->t6_status = status; } -static int mxt_read_message(struct mxt_data *data, u8 *message) -{ - struct mxt_object *object; - u16 reg; - - object = mxt_get_object(data, MXT_GEN_MESSAGE_T5); - if (!object) - return -EINVAL; - - reg = object->start_address; - return __mxt_read_reg(data->client, reg, - data->T5_msg_size, message); -} - static int mxt_write_object(struct mxt_data *data, u8 type, u8 offset, u8 val) { @@ -713,7 +701,7 @@ static void mxt_input_sync(struct mxt_data *data) input_sync(data->input_dev); } -static void mxt_input_touchevent(struct mxt_data *data, u8 *message) +static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) { struct device *dev = &data->client->dev; struct input_dev *input_dev = data->input_dev; @@ -775,50 +763,67 @@ static void mxt_input_touchevent(struct mxt_data *data, u8 *message) /* Touch no longer active, close out slot */ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0); } + + data->update_input = true; } -static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg) +static int mxt_proc_message(struct mxt_data *data, u8 *message) { - u8 id = msg[0]; - return (id >= data->T9_reportid_min && id <= data->T9_reportid_max); + u8 report_id = message[0]; + + if (report_id == MXT_RPTID_NOMSG) + return 0; + + if (report_id == data->T6_reportid) { + mxt_proc_t6_messages(data, message); + } else if (!data->input_dev) { + /* + * Do not report events if input device + * is not yet registered. + */ + mxt_dump_message(data, message); + } else if (report_id >= data->T9_reportid_min + && report_id <= data->T9_reportid_max) { + mxt_proc_t9_message(data, message); + } else if (report_id == data->T19_reportid) { + mxt_input_button(data, message); + data->update_input = true; + } else { + mxt_dump_message(data, message); + } + + return 1; } -static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) +static int mxt_read_and_process_message(struct mxt_data *data) { - u8 *message = &data->msg_buf[0]; struct device *dev = &data->client->dev; - u8 reportid; - bool update_input = false; + int ret; - do { - if (mxt_read_message(data, message)) { - dev_err(dev, "Failed to read message\n"); - return IRQ_NONE; - } + ret = __mxt_read_reg(data->client, data->T5_address, + data->T5_msg_size, data->msg_buf); + if (ret) { + dev_err(dev, "Error %d reading message\n", ret); + return ret; + } - reportid = message[0]; + return mxt_proc_message(data, data->msg_buf); +} - if (reportid == data->T6_reportid) { - mxt_proc_t6_messages(data, message); - } else if (!data->input_dev) { - /* - * do not report events if input device - * is not yet registered - */ - mxt_dump_message(data, message); - } else if (mxt_is_T9_message(data, message)) { - mxt_input_touchevent(data, message); - update_input = true; - } else if (reportid == data->T19_reportid) { - mxt_input_button(data, message); - update_input = true; - } else { - mxt_dump_message(data, message); - } - } while (reportid != MXT_RPTID_NOMSG); +static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) +{ + int ret; + + do { + ret = mxt_read_and_process_message(data); + if (ret < 0) + return IRQ_NONE; + } while (ret > 0); - if (update_input) + if (data->update_input) { mxt_input_sync(data); + data->update_input = false; + } return IRQ_HANDLED; } @@ -1213,21 +1218,19 @@ static int mxt_make_highchg(struct mxt_data *data) { struct device *dev = &data->client->dev; int count = 10; - int error; + int ret; - /* Read dummy message to make high CHG pin */ + /* Read messages until we force an invalid */ do { - error = mxt_read_message(data, data->msg_buf); - if (error) - return error; - } while (data->msg_buf[0] != MXT_RPTID_NOMSG && --count); - - if (!count) { - dev_err(dev, "CHG pin isn't cleared\n"); - return -EBUSY; - } + ret = mxt_read_and_process_message(data); + if (ret == 0) + return 0; + else if (ret < 0) + return ret; + } while (--count); - return 0; + dev_err(dev, "CHG pin isn't cleared\n"); + return -EBUSY; } static int mxt_acquire_irq(struct mxt_data *data) @@ -1266,6 +1269,7 @@ static void mxt_free_object_table(struct mxt_data *data) data->object_table = NULL; kfree(data->msg_buf); data->msg_buf = NULL; + data->T5_address = 0; data->T5_msg_size = 0; data->T6_reportid = 0; data->T7_address = 0; @@ -1327,6 +1331,7 @@ static int mxt_get_object_table(struct mxt_data *data) case MXT_GEN_MESSAGE_T5: /* CRC not enabled, therefore don't read last byte */ data->T5_msg_size = mxt_obj_size(object) - 1; + data->T5_address = object->start_address; case MXT_GEN_COMMAND_T6: data->T6_reportid = min_id; data->T6_address = object->start_address; -- cgit v0.10.2 From 9d8dc3e529a19e427fd379118acd132520935c5d Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Wed, 23 Jul 2014 12:49:04 -0700 Subject: Input: atmel_mxt_ts - implement T44 message handling maXTouch chips allow the reading of multiple messages in a single I2C transaction, which reduces bus overhead and improves performance/latency. The number of messages available to be read is given by the value in the T44 object which is located directly before the T5 object. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 699de55..c6dfd0a 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -244,12 +244,15 @@ struct mxt_data { unsigned int max_y; bool in_bootloader; u16 mem_size; + u8 max_reportid; u32 config_crc; u32 info_crc; u8 bootloader_addr; u8 *msg_buf; u8 t6_status; bool update_input; + u8 last_message_count; + u8 num_touchids; /* Cached parameters from object table */ u16 T5_address; @@ -260,6 +263,7 @@ struct mxt_data { u8 T9_reportid_min; u8 T9_reportid_max; u8 T19_reportid; + u16 T44_address; /* for fw update in bootloader */ struct completion bl_completion; @@ -795,30 +799,142 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message) return 1; } -static int mxt_read_and_process_message(struct mxt_data *data) +static int mxt_read_and_process_messages(struct mxt_data *data, u8 count) { struct device *dev = &data->client->dev; int ret; + int i; + u8 num_valid = 0; + + /* Safety check for msg_buf */ + if (count > data->max_reportid) + return -EINVAL; + /* Process remaining messages if necessary */ ret = __mxt_read_reg(data->client, data->T5_address, - data->T5_msg_size, data->msg_buf); + data->T5_msg_size * count, data->msg_buf); if (ret) { - dev_err(dev, "Error %d reading message\n", ret); + dev_err(dev, "Failed to read %u messages (%d)\n", count, ret); return ret; } - return mxt_proc_message(data, data->msg_buf); + for (i = 0; i < count; i++) { + ret = mxt_proc_message(data, + data->msg_buf + data->T5_msg_size * i); + + if (ret == 1) + num_valid++; + } + + /* return number of messages read */ + return num_valid; } -static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) +static irqreturn_t mxt_process_messages_t44(struct mxt_data *data) { + struct device *dev = &data->client->dev; int ret; + u8 count, num_left; - do { - ret = mxt_read_and_process_message(data); + /* Read T44 and T5 together */ + ret = __mxt_read_reg(data->client, data->T44_address, + data->T5_msg_size + 1, data->msg_buf); + if (ret) { + dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret); + return IRQ_NONE; + } + + count = data->msg_buf[0]; + + if (count == 0) { + dev_warn(dev, "Interrupt triggered but zero messages\n"); + return IRQ_NONE; + } else if (count > data->max_reportid) { + dev_err(dev, "T44 count %d exceeded max report id\n", count); + count = data->max_reportid; + } + + /* Process first message */ + ret = mxt_proc_message(data, data->msg_buf + 1); + if (ret < 0) { + dev_warn(dev, "Unexpected invalid message\n"); + return IRQ_NONE; + } + + num_left = count - 1; + + /* Process remaining messages if necessary */ + if (num_left) { + ret = mxt_read_and_process_messages(data, num_left); if (ret < 0) + goto end; + else if (ret != num_left) + dev_warn(dev, "Unexpected invalid message\n"); + } + +end: + if (data->update_input) { + mxt_input_sync(data); + data->update_input = false; + } + + return IRQ_HANDLED; +} + +static int mxt_process_messages_until_invalid(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + int count, read; + u8 tries = 2; + + count = data->max_reportid; + + /* Read messages until we force an invalid */ + do { + read = mxt_read_and_process_messages(data, count); + if (read < count) + return 0; + } while (--tries); + + if (data->update_input) { + mxt_input_sync(data); + data->update_input = false; + } + + dev_err(dev, "CHG pin isn't cleared\n"); + return -EBUSY; +} + +static irqreturn_t mxt_process_messages(struct mxt_data *data) +{ + int total_handled, num_handled; + u8 count = data->last_message_count; + + if (count < 1 || count > data->max_reportid) + count = 1; + + /* include final invalid message */ + total_handled = mxt_read_and_process_messages(data, count + 1); + if (total_handled < 0) + return IRQ_NONE; + /* if there were invalid messages, then we are done */ + else if (total_handled <= count) + goto update_count; + + /* keep reading two msgs until one is invalid or reportid limit */ + do { + num_handled = mxt_read_and_process_messages(data, 2); + if (num_handled < 0) return IRQ_NONE; - } while (ret > 0); + + total_handled += num_handled; + + if (num_handled < 2) + break; + } while (total_handled < data->num_touchids); + +update_count: + data->last_message_count = total_handled; if (data->update_input) { mxt_input_sync(data); @@ -841,7 +957,11 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) if (!data->object_table) return IRQ_HANDLED; - return mxt_process_messages_until_invalid(data); + if (data->T44_address) { + return mxt_process_messages_t44(data); + } else { + return mxt_process_messages(data); + } } static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset, @@ -1214,32 +1334,13 @@ release: return ret; } -static int mxt_make_highchg(struct mxt_data *data) -{ - struct device *dev = &data->client->dev; - int count = 10; - int ret; - - /* Read messages until we force an invalid */ - do { - ret = mxt_read_and_process_message(data); - if (ret == 0) - return 0; - else if (ret < 0) - return ret; - } while (--count); - - dev_err(dev, "CHG pin isn't cleared\n"); - return -EBUSY; -} - static int mxt_acquire_irq(struct mxt_data *data) { int error; enable_irq(data->irq); - error = mxt_make_highchg(data); + error = mxt_process_messages_until_invalid(data); if (error) return error; @@ -1276,6 +1377,8 @@ static void mxt_free_object_table(struct mxt_data *data) data->T9_reportid_min = 0; data->T9_reportid_max = 0; data->T19_reportid = 0; + data->T44_address = 0; + data->max_reportid = 0; } static int mxt_get_object_table(struct mxt_data *data) @@ -1329,8 +1432,16 @@ static int mxt_get_object_table(struct mxt_data *data) switch (object->type) { case MXT_GEN_MESSAGE_T5: - /* CRC not enabled, therefore don't read last byte */ - data->T5_msg_size = mxt_obj_size(object) - 1; + if (data->info.family_id == 0x80) { + /* + * On mXT224 read and discard unused CRC byte + * otherwise DMA reads are misaligned + */ + data->T5_msg_size = mxt_obj_size(object); + } else { + /* CRC not enabled, so skip last byte */ + data->T5_msg_size = mxt_obj_size(object) - 1; + } data->T5_address = object->start_address; case MXT_GEN_COMMAND_T6: data->T6_reportid = min_id; @@ -1342,6 +1453,11 @@ static int mxt_get_object_table(struct mxt_data *data) case MXT_TOUCH_MULTI_T9: data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; + data->num_touchids = object->num_report_ids + * mxt_obj_instances(object); + break; + case MXT_SPT_MESSAGECOUNT_T44: + data->T44_address = object->start_address; break; case MXT_SPT_GPIOPWM_T19: data->T19_reportid = min_id; @@ -1355,7 +1471,18 @@ static int mxt_get_object_table(struct mxt_data *data) data->mem_size = end_address + 1; } - data->msg_buf = kzalloc(data->T5_msg_size, GFP_KERNEL); + /* Store maximum reportid */ + data->max_reportid = reportid; + + /* If T44 exists, T5 position has to be directly after */ + if (data->T44_address && (data->T5_address != data->T44_address + 1)) { + dev_err(&client->dev, "Invalid T44 position\n"); + error = -EINVAL; + goto free_object_table; + } + + data->msg_buf = kcalloc(data->max_reportid, + data->T5_msg_size, GFP_KERNEL); if (!data->msg_buf) { dev_err(&client->dev, "Failed to allocate message buffer\n"); error = -ENOMEM; -- cgit v0.10.2 From 3ea7e551424bca5d7bbfc664446d9d9daa7f62de Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Wed, 23 Jul 2014 09:56:01 -0700 Subject: Input: driver for touchscreen on iPaq h3xxx This adds a driver for the touchscreen connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH, with the bulk of the code for the new input architecture rewritten by Dmitry Atamonow, and the final polish by Linus Walleij. Signed-off-by: Alessandro GARDICH Signed-off-by: Dmitry Artamonow Signed-off-by: Linus Walleij Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a23a94b..6bb9a7d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -471,6 +471,18 @@ config TOUCHSCREEN_HP7XX To compile this driver as a module, choose M here: the module will be called jornada720_ts. +config TOUCHSCREEN_IPAQ_MICRO + tristate "HP iPAQ Atmel Micro ASIC touchscreen" + depends on MFD_IPAQ_MICRO + help + Say Y here to enable support for the touchscreen attached to + the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700 + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ipaq-micro-ts. + config TOUCHSCREEN_HTCPEN tristate "HTC Shift X9500 touchscreen" depends on ISA diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 126479d..4be94fc 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o +obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO) += ipaq-micro-ts.o obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c new file mode 100644 index 0000000..53fa5c3 --- /dev/null +++ b/drivers/input/touchscreen/ipaq-micro-ts.c @@ -0,0 +1,142 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * h3600 atmel micro companion support, touchscreen subdevice + * Author : Alessandro Gardich + * Author : Dmitry Artamonow + * Author : Linus Walleij + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct touchscreen_data { + struct input_dev *input; + struct ipaq_micro *micro; +}; + +static void micro_ts_receive(void *data, int len, unsigned char *msg) +{ + struct touchscreen_data *ts = data; + + if (len == 4) { + input_report_abs(ts->input, ABS_X, + be16_to_cpup((__be16 *) &msg[2])); + input_report_abs(ts->input, ABS_Y, + be16_to_cpup((__be16 *) &msg[0])); + input_report_key(ts->input, BTN_TOUCH, 1); + input_sync(ts->input); + } else if (len == 0) { + input_report_abs(ts->input, ABS_X, 0); + input_report_abs(ts->input, ABS_Y, 0); + input_report_key(ts->input, BTN_TOUCH, 0); + input_sync(ts->input); + } +} + +static int micro_ts_probe(struct platform_device *pdev) +{ + struct touchscreen_data *ts; + int ret; + + ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + ts->micro = dev_get_drvdata(pdev->dev.parent); + + platform_set_drvdata(pdev, ts); + + ts->input = devm_input_allocate_device(&pdev->dev); + if (!ts->input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input_set_capability(ts->input, EV_KEY, BTN_TOUCH); + input_set_capability(ts->input, EV_ABS, ABS_X); + input_set_capability(ts->input, EV_ABS, ABS_Y); + input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0); + + ts->input->name = "ipaq micro ts"; + + ret = input_register_device(ts->input); + if (ret) { + dev_err(&pdev->dev, "error registering touch input\n"); + return ret; + } + + spin_lock_irq(&ts->micro->lock); + ts->micro->ts = micro_ts_receive; + ts->micro->ts_data = ts; + spin_unlock_irq(&ts->micro->lock); + + dev_info(&pdev->dev, "iPAQ micro touchscreen\n"); + return 0; +} + +static int micro_ts_remove(struct platform_device *pdev) +{ + struct touchscreen_data *ts = platform_get_drvdata(pdev); + + spin_lock_irq(&ts->micro->lock); + ts->micro->ts = NULL; + ts->micro->ts_data = NULL; + spin_unlock_irq(&ts->micro->lock); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int micro_ts_suspend(struct device *dev) +{ + struct touchscreen_data *ts = dev_get_drvdata(dev); + + spin_lock_irq(&ts->micro->lock); + ts->micro->ts = NULL; + ts->micro->ts_data = NULL; + spin_unlock_irq(&ts->micro->lock); + return 0; +} + +static int micro_ts_resume(struct device *dev) +{ + struct touchscreen_data *ts = dev_get_drvdata(dev); + + spin_lock_irq(&ts->micro->lock); + ts->micro->ts = micro_ts_receive; + ts->micro->ts_data = ts; + spin_unlock_irq(&ts->micro->lock); + return 0; +} +#endif + +static const struct dev_pm_ops micro_ts_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume) +}; + +static struct platform_driver micro_ts_device_driver = { + .driver = { + .name = "ipaq-micro-ts", + .pm = µ_ts_dev_pm_ops, + }, + .probe = micro_ts_probe, + .remove = micro_ts_remove, +}; +module_platform_driver(micro_ts_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen"); +MODULE_ALIAS("platform:ipaq-micro-ts"); -- cgit v0.10.2 From f348f329562da89bcd9b6acc420bf69860019199 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Jul 2014 10:03:10 -0700 Subject: Input: ipaq-micro-ts - introduce open/close Wire up open/close so we do not try to send events until someone uses them; this also allows us to remove micro_ts_remove() and rely fully on managed resources. Acked-by: Linus Walleij Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c index 53fa5c3..62c8976 100644 --- a/drivers/input/touchscreen/ipaq-micro-ts.c +++ b/drivers/input/touchscreen/ipaq-micro-ts.c @@ -46,17 +46,50 @@ static void micro_ts_receive(void *data, int len, unsigned char *msg) } } +static void micro_ts_toggle_receive(struct touchscreen_data *ts, bool enable) +{ + struct ipaq_micro *micro = ts->micro; + + spin_lock_irq(µ->lock); + + if (enable) { + micro->ts = micro_ts_receive; + micro->ts_data = ts; + } else { + micro->ts = NULL; + micro->ts_data = NULL; + } + + spin_unlock_irq(&ts->micro->lock); +} + +static int micro_ts_open(struct input_dev *input) +{ + struct touchscreen_data *ts = input_get_drvdata(input); + + micro_ts_toggle_receive(ts, true); + + return 0; +} + +static void micro_ts_close(struct input_dev *input) +{ + struct touchscreen_data *ts = input_get_drvdata(input); + + micro_ts_toggle_receive(ts, false); +} + static int micro_ts_probe(struct platform_device *pdev) { + struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent); struct touchscreen_data *ts; - int ret; + int error; ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL); if (!ts) return -ENOMEM; - ts->micro = dev_get_drvdata(pdev->dev.parent); - platform_set_drvdata(pdev, ts); + ts->micro = micro; ts->input = devm_input_allocate_device(&pdev->dev); if (!ts->input) { @@ -64,37 +97,27 @@ static int micro_ts_probe(struct platform_device *pdev) return -ENOMEM; } + ts->input->name = "ipaq micro ts"; + ts->input->open = micro_ts_open; + ts->input->close = micro_ts_close; + + input_set_drvdata(ts->input, ts); + input_set_capability(ts->input, EV_KEY, BTN_TOUCH); input_set_capability(ts->input, EV_ABS, ABS_X); input_set_capability(ts->input, EV_ABS, ABS_Y); input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0); input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0); - ts->input->name = "ipaq micro ts"; - - ret = input_register_device(ts->input); - if (ret) { + error = input_register_device(ts->input); + if (error) { dev_err(&pdev->dev, "error registering touch input\n"); - return ret; + return error; } - spin_lock_irq(&ts->micro->lock); - ts->micro->ts = micro_ts_receive; - ts->micro->ts_data = ts; - spin_unlock_irq(&ts->micro->lock); + platform_set_drvdata(pdev, ts); dev_info(&pdev->dev, "iPAQ micro touchscreen\n"); - return 0; -} - -static int micro_ts_remove(struct platform_device *pdev) -{ - struct touchscreen_data *ts = platform_get_drvdata(pdev); - - spin_lock_irq(&ts->micro->lock); - ts->micro->ts = NULL; - ts->micro->ts_data = NULL; - spin_unlock_irq(&ts->micro->lock); return 0; } @@ -104,21 +127,23 @@ static int micro_ts_suspend(struct device *dev) { struct touchscreen_data *ts = dev_get_drvdata(dev); - spin_lock_irq(&ts->micro->lock); - ts->micro->ts = NULL; - ts->micro->ts_data = NULL; - spin_unlock_irq(&ts->micro->lock); + micro_ts_toggle_receive(ts, false); + return 0; } static int micro_ts_resume(struct device *dev) { struct touchscreen_data *ts = dev_get_drvdata(dev); + struct input_dev *input = ts->input; + + mutex_lock(&input->mutex); + + if (input->users) + micro_ts_toggle_receive(ts, true); + + mutex_unlock(&input->mutex); - spin_lock_irq(&ts->micro->lock); - ts->micro->ts = micro_ts_receive; - ts->micro->ts_data = ts; - spin_unlock_irq(&ts->micro->lock); return 0; } #endif @@ -133,7 +158,6 @@ static struct platform_driver micro_ts_device_driver = { .pm = µ_ts_dev_pm_ops, }, .probe = micro_ts_probe, - .remove = micro_ts_remove, }; module_platform_driver(micro_ts_device_driver); -- cgit v0.10.2 From 5e740ce6043da476f1ee61c18af7d1df40ecbb57 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 24 Jul 2014 13:27:18 -0700 Subject: Input: wacom_serial4 - prepare for wacom USB moving to HID wacom_wac.h will be moving to drivers/hid. Since we only need 3 definitions from it let's simply copy them over. Acked-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c index d3d251e..20ab802 100644 --- a/drivers/input/tablet/wacom_serial4.c +++ b/drivers/input/tablet/wacom_serial4.c @@ -113,7 +113,6 @@ #include #include #include -#include "wacom_wac.h" MODULE_AUTHOR("Julian Squires , Hans de Goede "); MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver"); @@ -149,6 +148,11 @@ MODULE_LICENSE("GPL"); #define F_HAS_STYLUS2 0x02 #define F_HAS_SCROLLWHEEL 0x04 +/* device IDs */ +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A + enum { STYLUS = 1, ERASER, CURSOR }; static const struct { -- cgit v0.10.2 From 3cb83157e83bf82883e136240c7e059b7d9e29d1 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:47:47 -0700 Subject: Input: Revert "wacom - testing result shows get_report is unnecessary." This reverts commit 1b2faaf7e219fc2905d75afcd4c815e5d39eda80. The Intuos4 series presents a bug in which it hangs if it receives a set feature command while switching to the enhanced mode. This bug is triggered when plugging an Intuos 4 while having a gnome user session up and running. Signed-off-by: Benjamin Tissoires Signed-off-by: Aristeu Rozanski Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c613cd..72b1724 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -536,6 +536,9 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, report_id, rep_data, length, 1); + if (error >= 0) + error = wacom_get_report(intf, WAC_HID_FEATURE_REPORT, + report_id, rep_data, length, 1); } while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES); kfree(rep_data); -- cgit v0.10.2 From 7097d4cb597d1d9fe5296082cc3f191db44ab349 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:48:06 -0700 Subject: Input: wacom - assign phys field from struct wacom into input_dev This field was not used for 9 years, it is time to assign it. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 72b1724..7cd0886 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1127,6 +1127,7 @@ static int wacom_register_input(struct wacom *wacom) } input_dev->name = wacom_wac->name; + input_dev->phys = wacom->phys; input_dev->dev.parent = &intf->dev; input_dev->open = wacom_open; input_dev->close = wacom_close; -- cgit v0.10.2 From d2d13f18aaa51af070c7b6f20606d5cfdb7e87c1 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:48:28 -0700 Subject: Input: wacom - create a separate input device for pads Currently, the pad events are sent through the stylus input device for the Intuos/Cintiqs, and through the touch input device for the Bamboos. To differentiate the buttons pressed on the pad from the ones pressed on the stylus, the Intuos/Cintiq uses MISC_SERIAL and ABS_MISC. This lead to a multiplexing of the events into one device, which are then splitted out in xf86-input-wacom. Bamboos are not using MISC events because the pad is attached to the touch interface, and only BTN_TOUCH is used for the finger (and DOUBLE_TAP, etc...). However, the user space driver still splits out the pad from the touch interface in the same way it does for the pro line devices. The other problem we can see with this fact is that some of the Intuos and Cintiq have a wheel, and the effective range of the reported values is [0..71]. Unfortunately, the airbrush stylus also sends wheel events (there is a small wheel on it), but in the range [0..1023]. From the user space point of view it is kind of difficult to understand that because the wheel on the pad are quite common, while the airbrush tool is not. A solution to fix all of these problems is to split out the pad device from the stylus/touch. This decision makes more sense because the pad is not linked to the absolute position of the finger or pen, and usually, the events from the pad are filtered out by the compositor, which then convert them into actions or keyboard shortcuts. For backward compatibility with current xf86-input-wacom, the pad devices still present the ABS_X, ABS_Y and ABS_MISC events, but they can be completely ignored in the new implementation. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 9ebf0ed..caa59ca 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -136,4 +136,6 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); void wacom_setup_device_quirks(struct wacom_features *features); int wacom_setup_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 7cd0886..b258485 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -135,6 +135,9 @@ static int wacom_open(struct input_dev *dev) mutex_lock(&wacom->lock); + if (wacom->open) + goto out; + if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { retval = -EIO; goto out; @@ -157,9 +160,14 @@ static void wacom_close(struct input_dev *dev) autopm_error = usb_autopm_get_interface(wacom->intf); mutex_lock(&wacom->lock); + if (!wacom->open) + goto out; + usb_kill_urb(wacom->irq); wacom->open = false; wacom->intf->needs_remote_wakeup = 0; + +out: mutex_unlock(&wacom->lock); if (!autopm_error) @@ -1112,19 +1120,16 @@ static void wacom_destroy_battery(struct wacom *wacom) } } -static int wacom_register_input(struct wacom *wacom) +static struct input_dev *wacom_allocate_input(struct wacom *wacom) { struct input_dev *input_dev; struct usb_interface *intf = wacom->intf; struct usb_device *dev = interface_to_usbdev(intf); struct wacom_wac *wacom_wac = &(wacom->wacom_wac); - int error; input_dev = input_allocate_device(); - if (!input_dev) { - error = -ENOMEM; - goto fail1; - } + if (!input_dev) + return NULL; input_dev->name = wacom_wac->name; input_dev->phys = wacom->phys; @@ -1134,21 +1139,59 @@ static int wacom_register_input(struct wacom *wacom) usb_to_input_id(dev, &input_dev->id); input_set_drvdata(input_dev, wacom); + return input_dev; +} + +static int wacom_register_input(struct wacom *wacom) +{ + struct input_dev *input_dev, *pad_input_dev; + struct wacom_wac *wacom_wac = &(wacom->wacom_wac); + int error; + + input_dev = wacom_allocate_input(wacom); + pad_input_dev = wacom_allocate_input(wacom); + if (!input_dev || !pad_input_dev) { + error = -ENOMEM; + goto fail1; + } + wacom_wac->input = input_dev; + wacom_wac->pad_input = pad_input_dev; + wacom_wac->pad_input->name = wacom_wac->pad_name; + error = wacom_setup_input_capabilities(input_dev, wacom_wac); if (error) - goto fail1; + goto fail2; error = input_register_device(input_dev); if (error) goto fail2; + error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac); + if (error) { + /* no pad in use on this interface */ + input_free_device(pad_input_dev); + wacom_wac->pad_input = NULL; + pad_input_dev = NULL; + } else { + error = input_register_device(pad_input_dev); + if (error) + goto fail3; + } + return 0; +fail3: + input_unregister_device(input_dev); + input_dev = NULL; fail2: - input_free_device(input_dev); wacom_wac->input = NULL; + wacom_wac->pad_input = NULL; fail1: + if (input_dev) + input_free_device(input_dev); + if (pad_input_dev) + input_free_device(pad_input_dev); return error; } @@ -1367,6 +1410,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom_calculate_res(features); strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); + snprintf(wacom_wac->pad_name, sizeof(wacom_wac->pad_name), + "%s Pad", features->name); if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { struct usb_device *other_dev; @@ -1441,6 +1486,8 @@ static void wacom_disconnect(struct usb_interface *intf) cancel_work_sync(&wacom->work); if (wacom->wacom_wac.input) input_unregister_device(wacom->wacom_wac.input); + if (wacom->wacom_wac.pad_input) + input_unregister_device(wacom->wacom_wac.pad_input); wacom_destroy_battery(wacom); wacom_destroy_leds(wacom); usb_free_urb(wacom->irq); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 977d05c..4b16a34 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1489,8 +1489,11 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) break; } - if (sync) + if (sync) { input_sync(wacom_wac->input); + if (wacom_wac->pad_input) + input_sync(wacom_wac->pad_input); + } } static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) @@ -1939,6 +1942,28 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, return 0; } +int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac) +{ + struct wacom_features *features = &wacom_wac->features; + + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + + /* kept for making legacy xf86-input-wacom working with the wheels */ + __set_bit(ABS_MISC, input_dev->absbit); + + /* kept for making legacy xf86-input-wacom accepting the pad */ + input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); + + switch (features->type) { + default: + /* no pad supported */ + return 1; + } + return 0; +} + static const struct wacom_features wacom_features_0x00 = { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, 0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index b2c9a9c..f48164c 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -150,6 +150,7 @@ struct wacom_shared { struct wacom_wac { char name[WACOM_NAME_MAX]; + char pad_name[WACOM_NAME_MAX]; unsigned char *data; int tool[2]; int id[2]; @@ -157,6 +158,7 @@ struct wacom_wac { struct wacom_features features; struct wacom_shared *shared; struct input_dev *input; + struct input_dev *pad_input; int pid; int battery_capacity; int num_contacts_left; -- cgit v0.10.2 From 10059cdc0ad0be9dc8f7df2fbf2e21b406a94539 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:49:08 -0700 Subject: Input: wacom - split out the pad device for Intuos/Cintiq MSC_SERIAL can be safely dropped for pad input devices. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 4b16a34..8807ab5 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -584,6 +584,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) /* pad packets. Works as a second tool and is always in prox */ if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) { + input = wacom->pad_input; if (features->type >= INTUOS4S && features->type <= INTUOS4L) { input_report_key(input, BTN_0, (data[2] & 0x01)); input_report_key(input, BTN_1, (data[3] & 0x01)); @@ -773,7 +774,6 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_abs(input, ABS_MISC, 0); } } - input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff); return 1; } @@ -1656,61 +1656,20 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, break; case WACOM_24HD: - __set_bit(BTN_A, input_dev->keybit); - __set_bit(BTN_B, input_dev->keybit); - __set_bit(BTN_C, input_dev->keybit); - __set_bit(BTN_X, input_dev->keybit); - __set_bit(BTN_Y, input_dev->keybit); - __set_bit(BTN_Z, input_dev->keybit); - - for (i = 6; i < 10; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - __set_bit(KEY_PROG1, input_dev->keybit); - __set_bit(KEY_PROG2, input_dev->keybit); - __set_bit(KEY_PROG3, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); /* fall through */ case DTK: - for (i = 0; i < 6; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); wacom_setup_cintiq(wacom_wac); break; case WACOM_22HD: - __set_bit(KEY_PROG1, input_dev->keybit); - __set_bit(KEY_PROG2, input_dev->keybit); - __set_bit(KEY_PROG3, input_dev->keybit); - /* fall through */ - case WACOM_21UX2: - __set_bit(BTN_A, input_dev->keybit); - __set_bit(BTN_B, input_dev->keybit); - __set_bit(BTN_C, input_dev->keybit); - __set_bit(BTN_X, input_dev->keybit); - __set_bit(BTN_Y, input_dev->keybit); - __set_bit(BTN_Z, input_dev->keybit); - __set_bit(BTN_BASE, input_dev->keybit); - __set_bit(BTN_BASE2, input_dev->keybit); - /* fall through */ - case WACOM_BEE: - __set_bit(BTN_8, input_dev->keybit); - __set_bit(BTN_9, input_dev->keybit); - /* fall through */ - case CINTIQ: - for (i = 0; i < 8; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); @@ -1719,9 +1678,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, break; case WACOM_13HD: - for (i = 0; i < 9; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); wacom_setup_cintiq(wacom_wac); @@ -1729,21 +1685,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case INTUOS3: case INTUOS3L: - __set_bit(BTN_4, input_dev->keybit); - __set_bit(BTN_5, input_dev->keybit); - __set_bit(BTN_6, input_dev->keybit); - __set_bit(BTN_7, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); - /* fall through */ - case INTUOS3S: - __set_bit(BTN_0, input_dev->keybit); - __set_bit(BTN_1, input_dev->keybit); - __set_bit(BTN_2, input_dev->keybit); - __set_bit(BTN_3, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); /* fall through */ @@ -1757,20 +1699,11 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case INTUOS5L: case INTUOSPM: case INTUOSPL: - if (features->device_type == BTN_TOOL_PEN) { - __set_bit(BTN_7, input_dev->keybit); - __set_bit(BTN_8, input_dev->keybit); - } - /* fall through */ - case INTUOS5S: case INTUOSPS: __set_bit(INPUT_PROP_POINTER, input_dev->propbit); if (features->device_type == BTN_TOOL_PEN) { - for (i = 0; i < 7; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, features->distance_max, 0, 0); @@ -1791,14 +1724,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case INTUOS4: case INTUOS4L: - __set_bit(BTN_7, input_dev->keybit); - __set_bit(BTN_8, input_dev->keybit); - /* fall through */ - case INTUOS4S: - for (i = 0; i < 7; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); @@ -1922,17 +1848,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, break; case CINTIQ_HYBRID: - __set_bit(BTN_1, input_dev->keybit); - __set_bit(BTN_2, input_dev->keybit); - __set_bit(BTN_3, input_dev->keybit); - __set_bit(BTN_4, input_dev->keybit); - - __set_bit(BTN_5, input_dev->keybit); - __set_bit(BTN_6, input_dev->keybit); - __set_bit(BTN_7, input_dev->keybit); - __set_bit(BTN_8, input_dev->keybit); - __set_bit(BTN_0, input_dev->keybit); - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); @@ -1946,6 +1861,7 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; + int i; input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); @@ -1957,6 +1873,126 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); switch (features->type) { + case WACOM_24HD: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + + for (i = 0; i < 10; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + break; + + case DTK: + for (i = 0; i < 6; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + break; + + case WACOM_22HD: + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + /* fall through */ + + case WACOM_21UX2: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + __set_bit(BTN_BASE, input_dev->keybit); + __set_bit(BTN_BASE2, input_dev->keybit); + /* fall through */ + + case WACOM_BEE: + __set_bit(BTN_8, input_dev->keybit); + __set_bit(BTN_9, input_dev->keybit); + /* fall through */ + + case CINTIQ: + for (i = 0; i < 8; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + break; + + case WACOM_13HD: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case INTUOS3: + case INTUOS3L: + __set_bit(BTN_4, input_dev->keybit); + __set_bit(BTN_5, input_dev->keybit); + __set_bit(BTN_6, input_dev->keybit); + __set_bit(BTN_7, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + /* fall through */ + + case INTUOS3S: + __set_bit(BTN_0, input_dev->keybit); + __set_bit(BTN_1, input_dev->keybit); + __set_bit(BTN_2, input_dev->keybit); + __set_bit(BTN_3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + break; + + case INTUOS5: + case INTUOS5L: + case INTUOSPM: + case INTUOSPL: + __set_bit(BTN_7, input_dev->keybit); + __set_bit(BTN_8, input_dev->keybit); + /* fall through */ + + case INTUOS5S: + case INTUOSPS: + /* touch interface does not have the pad device */ + if (features->device_type != BTN_TOOL_PEN) + return 1; + + for (i = 0; i < 7; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case INTUOS4: + case INTUOS4L: + __set_bit(BTN_7, input_dev->keybit); + __set_bit(BTN_8, input_dev->keybit); + /* fall through */ + + case INTUOS4S: + for (i = 0; i < 7; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case CINTIQ_HYBRID: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + break; + default: /* no pad supported */ return 1; -- cgit v0.10.2 From 3116871f427386933a1fcd87e831ea664cbd0bf2 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:50:10 -0700 Subject: Input: wacom - split out the pad device for Bamboos We rely on the return code of wacom_bpt*() to do the input_sync(). wacom_wac_irq() then properly sync the input devices. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 8807ab5..5aaa3d2 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1143,6 +1143,7 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; struct input_dev *input = wacom->input; + struct input_dev *pad_input = wacom->pad_input; unsigned char *data = wacom->data; int i; @@ -1177,14 +1178,12 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) input_mt_report_pointer_emulation(input, true); - input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); - input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); - input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); - input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); - - input_sync(input); + input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0); + input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0); + input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0); + input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0); - return 0; + return 1; } static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) @@ -1232,7 +1231,7 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) { - struct input_dev *input = wacom->input; + struct input_dev *input = wacom->pad_input; struct wacom_features *features = &wacom->features; if (features->type == INTUOSHT) { @@ -1269,9 +1268,7 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom) } input_mt_report_pointer_emulation(input, true); - input_sync(input); - - return 0; + return 1; } static int wacom_bpt_pen(struct wacom_wac *wacom) @@ -1806,11 +1803,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, if (features->device_type == BTN_TOOL_FINGER) { - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - if (features->touch_max) { /* touch interface */ unsigned int flags = INPUT_MT_POINTER; @@ -1993,6 +1985,21 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, break; + case INTUOSHT: + case BAMBOO_PT: + /* pad device is on the touch interface */ + if (features->device_type != BTN_TOOL_FINGER) + return 1; + + __clear_bit(ABS_MISC, input_dev->absbit); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + break; + default: /* no pad supported */ return 1; -- cgit v0.10.2 From 422b0314b9f29a2c61d426fdaf1864556809ac1c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:50:39 -0700 Subject: Input: wacom - split out the pad device for DTUS MSC_SERIAL can be safely removed from the pad device. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 5aaa3d2..d3aef3a 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -217,17 +217,13 @@ static int wacom_dtus_irq(struct wacom_wac *wacom) "%s: received unknown report #%d", __func__, data[0]); return 0; } else if (data[0] == WACOM_REPORT_DTUSPAD) { + input = wacom->pad_input; input_report_key(input, BTN_0, (data[1] & 0x01)); input_report_key(input, BTN_1, (data[1] & 0x02)); input_report_key(input, BTN_2, (data[1] & 0x04)); input_report_key(input, BTN_3, (data[1] & 0x08)); input_report_abs(input, ABS_MISC, data[1] & 0x0f ? PAD_DEVICE_ID : 0); - /* - * Serial number is required when expresskeys are - * reported through pen interface. - */ - input_event(input, EV_MSC, MSC_SERIAL, 0xf0); return 1; } else { prox = data[1] & 0x80; @@ -257,7 +253,6 @@ static int wacom_dtus_irq(struct wacom_wac *wacom) wacom->id[0] = 0; input_report_key(input, wacom->tool[0], prox); input_report_abs(input, ABS_MISC, wacom->id[0]); - input_event(input, EV_MSC, MSC_SERIAL, 1); return 1; } } @@ -1615,7 +1610,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; - int i; input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); @@ -1765,11 +1759,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, case DTUS: case PL: case DTU: - if (features->type == DTUS) { - input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - for (i = 0; i < 4; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - } __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); @@ -1985,6 +1974,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, break; + case DTUS: + for (i = 0; i < 4; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + break; + case INTUOSHT: case BAMBOO_PT: /* pad device is on the touch interface */ -- cgit v0.10.2 From 3813810c7103f90eb2a0ec43fbd637265360c618 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:51:03 -0700 Subject: Input: wacom - split out the pad device for Graphire G4 and MO MSC_SERIAL can be safely removed from pad devices. If it is not here, xf86-input-wacom correctly generates ones for its internal use. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index d3aef3a..f170277 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -262,6 +262,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; + struct input_dev *pad_input = wacom->pad_input; int prox; int rw = 0; int retval = 0; @@ -322,7 +323,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) wacom->id[0] = 0; input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_key(input, wacom->tool[0], prox); - input_event(input, EV_MSC, MSC_SERIAL, 1); input_sync(input); /* sync last event */ } @@ -332,14 +332,13 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) prox = data[7] & 0xf8; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; - input_report_key(input, BTN_BACK, (data[7] & 0x40)); - input_report_key(input, BTN_FORWARD, (data[7] & 0x80)); + input_report_key(pad_input, BTN_BACK, (data[7] & 0x40)); + input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80)); rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); - input_report_rel(input, REL_WHEEL, rw); + input_report_rel(pad_input, REL_WHEEL, rw); if (!prox) wacom->id[1] = 0; - input_report_abs(input, ABS_MISC, wacom->id[1]); - input_event(input, EV_MSC, MSC_SERIAL, 0xf0); + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); retval = 1; } break; @@ -348,15 +347,14 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) prox = (data[7] & 0xf8) || data[8]; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; - input_report_key(input, BTN_BACK, (data[7] & 0x08)); - input_report_key(input, BTN_LEFT, (data[7] & 0x20)); - input_report_key(input, BTN_FORWARD, (data[7] & 0x10)); - input_report_key(input, BTN_RIGHT, (data[7] & 0x40)); - input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f)); + input_report_key(pad_input, BTN_BACK, (data[7] & 0x08)); + input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20)); + input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10)); + input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40)); + input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f)); if (!prox) wacom->id[1] = 0; - input_report_abs(input, ABS_MISC, wacom->id[1]); - input_event(input, EV_MSC, MSC_SERIAL, 0xf0); + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); retval = 1; } break; @@ -1624,10 +1622,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, /* fall through */ case WACOM_G4: - input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); /* fall through */ case GRAPHIRE: @@ -1854,6 +1848,22 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); switch (features->type) { + case WACOM_MO: + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case WACOM_G4: + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + input_set_capability(input_dev, EV_REL, REL_WHEEL); + break; + case WACOM_24HD: __set_bit(BTN_A, input_dev->keybit); __set_bit(BTN_B, input_dev->keybit); -- cgit v0.10.2 From 008f4d9e3cd666c1c4f97b53c102a868a6041f64 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:51:26 -0700 Subject: Input: wacom - split out the pad device for the wireless receiver The Wireless Receiver should also behave in the same way than regular USB devices. To simplify the unregistering of the different devices, wacom_unregister_inputs() is introduced. For consistency, the function wacom_register_input() is renamed into wacom_register_inputs(). Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index b258485..dd0dbc2 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1142,7 +1142,17 @@ static struct input_dev *wacom_allocate_input(struct wacom *wacom) return input_dev; } -static int wacom_register_input(struct wacom *wacom) +static void wacom_unregister_inputs(struct wacom *wacom) +{ + if (wacom->wacom_wac.input) + input_unregister_device(wacom->wacom_wac.input); + if (wacom->wacom_wac.pad_input) + input_unregister_device(wacom->wacom_wac.pad_input); + wacom->wacom_wac.input = NULL; + wacom->wacom_wac.pad_input = NULL; +} + +static int wacom_register_inputs(struct wacom *wacom) { struct input_dev *input_dev, *pad_input_dev; struct wacom_wac *wacom_wac = &(wacom->wacom_wac); @@ -1214,16 +1224,12 @@ static void wacom_wireless_work(struct work_struct *work) /* Stylus interface */ wacom1 = usb_get_intfdata(usbdev->config->interface[1]); wacom_wac1 = &(wacom1->wacom_wac); - if (wacom_wac1->input) - input_unregister_device(wacom_wac1->input); - wacom_wac1->input = NULL; + wacom_unregister_inputs(wacom1); /* Touch interface */ wacom2 = usb_get_intfdata(usbdev->config->interface[2]); wacom_wac2 = &(wacom2->wacom_wac); - if (wacom_wac2->input) - input_unregister_device(wacom_wac2->input); - wacom_wac2->input = NULL; + wacom_unregister_inputs(wacom2); if (wacom_wac->pid == 0) { dev_info(&wacom->intf->dev, "wireless tablet disconnected\n"); @@ -1253,9 +1259,11 @@ static void wacom_wireless_work(struct work_struct *work) wacom_wac1->features.device_type = BTN_TOOL_PEN; snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen", wacom_wac1->features.name); + snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad", + wacom_wac1->features.name); wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max; wacom_wac1->shared->type = wacom_wac1->features.type; - error = wacom_register_input(wacom1); + error = wacom_register_inputs(wacom1); if (error) goto fail; @@ -1273,7 +1281,9 @@ static void wacom_wireless_work(struct work_struct *work) else snprintf(wacom_wac2->name, WACOM_NAME_MAX, "%s (WL) Pad",wacom_wac2->features.name); - error = wacom_register_input(wacom2); + snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX, + "%s (WL) Pad", wacom_wac2->features.name); + error = wacom_register_inputs(wacom2); if (error) goto fail; @@ -1290,15 +1300,8 @@ static void wacom_wireless_work(struct work_struct *work) return; fail: - if (wacom_wac2->input) { - input_unregister_device(wacom_wac2->input); - wacom_wac2->input = NULL; - } - - if (wacom_wac1->input) { - input_unregister_device(wacom_wac1->input); - wacom_wac1->input = NULL; - } + wacom_unregister_inputs(wacom1); + wacom_unregister_inputs(wacom2); return; } @@ -1444,7 +1447,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i goto fail4; if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { - error = wacom_register_input(wacom); + error = wacom_register_inputs(wacom); if (error) goto fail5; } @@ -1484,10 +1487,7 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); cancel_work_sync(&wacom->work); - if (wacom->wacom_wac.input) - input_unregister_device(wacom->wacom_wac.input); - if (wacom->wacom_wac.pad_input) - input_unregister_device(wacom->wacom_wac.pad_input); + wacom_unregister_inputs(wacom); wacom_destroy_battery(wacom); wacom_destroy_leds(wacom); usb_free_urb(wacom->irq); -- cgit v0.10.2 From f54bc61cf7236db84939ca8827ac89737d79ef24 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:52:00 -0700 Subject: Input: wacom - include and use linux/hid.h The current wacom code redefines constants that are already in linux/hid.h This patch includes the official implementation and use it accross the code. There is a conflict with HID_USAGE and others at the same level: - in the wacom.ko implementation, those are the #define regarding the value of the field in the report descriptor - in the hid.h, those are bitmask So add HDESC_ in their current definition. Also, the struct hid_descriptor slightly differs from the linux/hid.h point of view, so mark it as custom for this driver. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index dd0dbc2..c34791e 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -13,28 +13,19 @@ #include "wacom_wac.h" #include "wacom.h" +#include /* defines to get HID report descriptor */ #define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) #define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) -#define HID_USAGE_UNDEFINED 0x00 -#define HID_USAGE_PAGE 0x05 -#define HID_USAGE_PAGE_DIGITIZER 0x0d -#define HID_USAGE_PAGE_DESKTOP 0x01 -#define HID_USAGE 0x09 -#define HID_USAGE_X ((HID_USAGE_PAGE_DESKTOP << 16) | 0x30) -#define HID_USAGE_Y ((HID_USAGE_PAGE_DESKTOP << 16) | 0x31) -#define HID_USAGE_PRESSURE ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x30) -#define HID_USAGE_X_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3d) -#define HID_USAGE_Y_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3e) -#define HID_USAGE_FINGER ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x22) -#define HID_USAGE_STYLUS ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x20) -#define HID_USAGE_CONTACTMAX ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x55) -#define HID_COLLECTION 0xa1 -#define HID_COLLECTION_LOGICAL 0x02 -#define HID_COLLECTION_END 0xc0 - -struct hid_descriptor { +#define HID_HDESC_USAGE_UNDEFINED 0x00 +#define HID_HDESC_USAGE_PAGE 0x05 +#define HID_HDESC_USAGE 0x09 +#define HID_HDESC_COLLECTION 0xa1 +#define HID_HDESC_COLLECTION_LOGICAL 0x02 +#define HID_HDESC_COLLECTION_END 0xc0 + +struct wac_hid_descriptor { struct usb_descriptor_header header; __le16 bcdHID; u8 bCountryCode; @@ -301,7 +292,7 @@ static void wacom_retrieve_report_data(struct usb_interface *intf, * this after returning from this function. */ static int wacom_parse_hid(struct usb_interface *intf, - struct hid_descriptor *hid_desc, + struct wac_hid_descriptor *hid_desc, struct wacom_features *features) { struct usb_device *dev = interface_to_usbdev(intf); @@ -334,14 +325,14 @@ static int wacom_parse_hid(struct usb_interface *intf, for (i = 0; i < hid_desc->wDescriptorLength; i++) { switch (report[i]) { - case HID_USAGE_PAGE: + case HID_HDESC_USAGE_PAGE: page = report[i + 1]; i++; break; - case HID_USAGE: + case HID_HDESC_USAGE: switch (page << 16 | report[i + 1]) { - case HID_USAGE_X: + case HID_GD_X: if (finger) { features->device_type = BTN_TOOL_FINGER; /* touch device at least supports one touch point */ @@ -420,7 +411,7 @@ static int wacom_parse_hid(struct usb_interface *intf, } break; - case HID_USAGE_Y: + case HID_GD_Y: if (finger) { switch (features->type) { case TABLETPC2FG: @@ -472,7 +463,7 @@ static int wacom_parse_hid(struct usb_interface *intf, } break; - case HID_USAGE_FINGER: + case HID_DG_FINGER: finger = 1; i++; break; @@ -482,19 +473,19 @@ static int wacom_parse_hid(struct usb_interface *intf, * X/Y values and some cases of invalid Digitizer X/Y * values commonly reported. */ - case HID_USAGE_STYLUS: + case HID_DG_STYLUS: pen = 1; i++; break; - case HID_USAGE_CONTACTMAX: + case HID_DG_CONTACTMAX: /* leave touch_max as is if predefined */ if (!features->touch_max) wacom_retrieve_report_data(intf, features); i++; break; - case HID_USAGE_PRESSURE: + case HID_DG_TIPPRESSURE: if (pen) { features->pressure_max = get_unaligned_le16(&report[i + 3]); @@ -504,15 +495,15 @@ static int wacom_parse_hid(struct usb_interface *intf, } break; - case HID_COLLECTION_END: + case HID_HDESC_COLLECTION_END: /* reset UsagePage and Finger */ finger = page = 0; break; - case HID_COLLECTION: + case HID_HDESC_COLLECTION: i++; switch (report[i]) { - case HID_COLLECTION_LOGICAL: + case HID_HDESC_COLLECTION_LOGICAL: i += wacom_parse_logical_collection(&report[i], features); break; @@ -585,7 +576,7 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, { int error = 0; struct usb_host_interface *interface = intf->cur_altsetting; - struct hid_descriptor *hid_desc; + struct wac_hid_descriptor *hid_desc; /* default features */ features->device_type = BTN_TOOL_PEN; -- cgit v0.10.2 From 29b4739134c73a2873adec93346f09bb76d6a794 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:52:23 -0700 Subject: Input: wacom - switch from an USB driver to a HID driver All USB Wacom tablets are actually HID devices. For historical reasons, they are handled as plain USB devices. The current code makes more and more reference to the HID subsystem like implementing its own HID report descriptor parser to handle new devices. From the user point of view, we can transparently switch from this state to a driver handled in the HID subsystem and clean up a lot of USB specific code in the wacom.ko driver. The other benefit once the USB dependecies have been removed is that we can use a tool like uhid to make regression tests and allow further cleanup or new implementations without risking breaking current behaviors. To match the current handling of devices in wacom_wac.c, we rely on the hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the device is plain HID. There is thus a one to one matching between the list of supported devices before and after the switch from USB to HID. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8ed66fd..1ce751d 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -787,6 +787,15 @@ static int hid_scan_report(struct hid_device *hid) /* hid-rmi should take care of them, not hid-generic */ hid->group = HID_GROUP_RMI; + /* + * Vendor specific handlings + */ + switch (hid->vendor) { + case USB_VENDOR_ID_WACOM: + hid->group = HID_GROUP_WACOM; + break; + } + vfree(parser); return 0; } @@ -2339,7 +2348,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LCSPEC) }, - { HID_USB_DEVICE(USB_VENDOR_ID_WACOM, HID_ANY_ID) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) }, diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 902013e..4874f4e 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -960,7 +960,7 @@ static const struct hid_device_id wacom_devices[] = { MODULE_DEVICE_TABLE(hid, wacom_devices); static struct hid_driver wacom_driver = { - .name = "wacom", + .name = "hid-wacom", .id_table = wacom_devices, .probe = wacom_probe, .remove = wacom_remove, diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index caa59ca..b921239 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -106,14 +106,12 @@ MODULE_LICENSE(DRIVER_LICENSE); #define USB_VENDOR_ID_LENOVO 0x17ef struct wacom { - dma_addr_t data_dma; struct usb_device *usbdev; struct usb_interface *intf; - struct urb *irq; struct wacom_wac wacom_wac; + struct hid_device *hdev; struct mutex lock; struct work_struct work; - bool open; char phys[32]; struct wacom_led { u8 select[2]; /* status led selector (0..3) */ @@ -130,7 +128,7 @@ static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) schedule_work(&wacom->work); } -extern const struct usb_device_id wacom_ids[]; +extern const struct hid_device_id wacom_ids[]; void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); void wacom_setup_device_quirks(struct wacom_features *features); diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index c34791e..5ceeab6 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -83,86 +83,40 @@ static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id, return retval; } -static void wacom_sys_irq(struct urb *urb) +static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) { - struct wacom *wacom = urb->context; - struct device *dev = &wacom->intf->dev; - int retval; + struct wacom *wacom = hid_get_drvdata(hdev); - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dev_dbg(dev, "%s - urb shutting down with status: %d\n", - __func__, urb->status); - return; - default: - dev_dbg(dev, "%s - nonzero urb status received: %d\n", - __func__, urb->status); - goto exit; - } + if (size > WACOM_PKGLEN_MAX) + return 1; - wacom_wac_irq(&wacom->wacom_wac, urb->actual_length); + memcpy(wacom->wacom_wac.data, raw_data, size); - exit: - usb_mark_last_busy(wacom->usbdev); - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(dev, "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + wacom_wac_irq(&wacom->wacom_wac, size); + + return 0; } static int wacom_open(struct input_dev *dev) { struct wacom *wacom = input_get_drvdata(dev); - int retval = 0; - - if (usb_autopm_get_interface(wacom->intf) < 0) - return -EIO; + int retval; mutex_lock(&wacom->lock); - - if (wacom->open) - goto out; - - if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { - retval = -EIO; - goto out; - } - - wacom->open = true; - wacom->intf->needs_remote_wakeup = 1; - -out: + retval = hid_hw_open(wacom->hdev); mutex_unlock(&wacom->lock); - usb_autopm_put_interface(wacom->intf); + return retval; } static void wacom_close(struct input_dev *dev) { struct wacom *wacom = input_get_drvdata(dev); - int autopm_error; - - autopm_error = usb_autopm_get_interface(wacom->intf); mutex_lock(&wacom->lock); - if (!wacom->open) - goto out; - - usb_kill_urb(wacom->irq); - wacom->open = false; - wacom->intf->needs_remote_wakeup = 0; - -out: + hid_hw_close(wacom->hdev); mutex_unlock(&wacom->lock); - - if (!autopm_error) - usb_autopm_put_interface(wacom->intf); } /* @@ -807,7 +761,8 @@ out: static ssize_t wacom_led_select_store(struct device *dev, int set_id, const char *buf, size_t count) { - struct wacom *wacom = dev_get_drvdata(dev); + struct hid_device *hdev = dev_get_drvdata(dev); + struct wacom *wacom = hid_get_drvdata(hdev); unsigned int id; int err; @@ -834,7 +789,8 @@ static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \ static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ - struct wacom *wacom = dev_get_drvdata(dev); \ + struct hid_device *hdev = dev_get_drvdata(dev); \ + struct wacom *wacom = hid_get_drvdata(hdev); \ return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \ } \ static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \ @@ -868,7 +824,8 @@ static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest, static ssize_t wacom_##name##_luminance_store(struct device *dev, \ struct device_attribute *attr, const char *buf, size_t count) \ { \ - struct wacom *wacom = dev_get_drvdata(dev); \ + struct hid_device *hdev = dev_get_drvdata(dev); \ + struct wacom *wacom = hid_get_drvdata(hdev); \ \ return wacom_luminance_store(wacom, &wacom->led.field, \ buf, count); \ @@ -883,7 +840,8 @@ DEVICE_LUMINANCE_ATTR(buttons, img_lum); static ssize_t wacom_button_image_store(struct device *dev, int button_id, const char *buf, size_t count) { - struct wacom *wacom = dev_get_drvdata(dev); + struct hid_device *hdev = dev_get_drvdata(dev); + struct wacom *wacom = hid_get_drvdata(hdev); int err; if (count != 1024) @@ -1201,6 +1159,7 @@ static void wacom_wireless_work(struct work_struct *work) struct wacom *wacom = container_of(work, struct wacom, work); struct usb_device *usbdev = wacom->usbdev; struct wacom_wac *wacom_wac = &wacom->wacom_wac; + struct hid_device *hdev1, *hdev2; struct wacom *wacom1, *wacom2; struct wacom_wac *wacom_wac1, *wacom_wac2; int error; @@ -1213,32 +1172,34 @@ static void wacom_wireless_work(struct work_struct *work) wacom_destroy_battery(wacom); /* Stylus interface */ - wacom1 = usb_get_intfdata(usbdev->config->interface[1]); + hdev1 = usb_get_intfdata(usbdev->config->interface[1]); + wacom1 = hid_get_drvdata(hdev1); wacom_wac1 = &(wacom1->wacom_wac); wacom_unregister_inputs(wacom1); /* Touch interface */ - wacom2 = usb_get_intfdata(usbdev->config->interface[2]); + hdev2 = usb_get_intfdata(usbdev->config->interface[2]); + wacom2 = hid_get_drvdata(hdev2); wacom_wac2 = &(wacom2->wacom_wac); wacom_unregister_inputs(wacom2); if (wacom_wac->pid == 0) { dev_info(&wacom->intf->dev, "wireless tablet disconnected\n"); } else { - const struct usb_device_id *id = wacom_ids; + const struct hid_device_id *id = wacom_ids; dev_info(&wacom->intf->dev, "wireless tablet connected with PID %x\n", wacom_wac->pid); - while (id->match_flags) { - if (id->idVendor == USB_VENDOR_ID_WACOM && - id->idProduct == wacom_wac->pid) + while (id->bus) { + if (id->vendor == USB_VENDOR_ID_WACOM && + id->product == wacom_wac->pid) break; id++; } - if (!id->match_flags) { + if (!id->bus) { dev_info(&wacom->intf->dev, "ignoring unknown PID.\n"); return; @@ -1246,7 +1207,7 @@ static void wacom_wireless_work(struct work_struct *work) /* Stylus interface */ wacom_wac1->features = - *((struct wacom_features *)id->driver_info); + *((struct wacom_features *)id->driver_data); wacom_wac1->features.device_type = BTN_TOOL_PEN; snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen", wacom_wac1->features.name); @@ -1262,7 +1223,7 @@ static void wacom_wireless_work(struct work_struct *work) if (wacom_wac1->features.touch_max || wacom_wac1->features.type == INTUOSHT) { wacom_wac2->features = - *((struct wacom_features *)id->driver_info); + *((struct wacom_features *)id->driver_data); wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; wacom_wac2->features.device_type = BTN_TOOL_FINGER; wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096; @@ -1323,8 +1284,10 @@ static void wacom_calculate_res(struct wacom_features *features) features->unitExpo); } -static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) +static int wacom_probe(struct hid_device *hdev, + const struct hid_device_id *id) { + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; @@ -1332,34 +1295,29 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i struct wacom_features *features; int error; - if (!id->driver_info) + if (!id->driver_data) return -EINVAL; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); if (!wacom) return -ENOMEM; + hid_set_drvdata(hdev, wacom); + wacom->hdev = hdev; + wacom_wac = &wacom->wacom_wac; - wacom_wac->features = *((struct wacom_features *)id->driver_info); + wacom_wac->features = *((struct wacom_features *)id->driver_data); features = &wacom_wac->features; if (features->pktlen > WACOM_PKGLEN_MAX) { error = -EINVAL; goto fail1; } - wacom_wac->data = usb_alloc_coherent(dev, WACOM_PKGLEN_MAX, - GFP_KERNEL, &wacom->data_dma); - if (!wacom_wac->data) { - error = -ENOMEM; + if (features->check_for_hid_type && features->hid_type != hdev->type) { + error = -ENODEV; goto fail1; } - wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) { - error = -ENOMEM; - goto fail2; - } - wacom->usbdev = dev; wacom->intf = intf; mutex_init(&wacom->lock); @@ -1375,7 +1333,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i /* Retrieve the physical and logical size for touch devices */ error = wacom_retrieve_hid_descriptor(intf, features); if (error) - goto fail3; + goto fail1; /* * Intuos5 has no useful data about its touch interface in its @@ -1423,38 +1381,38 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i other_dev = dev; error = wacom_add_shared_data(wacom_wac, other_dev); if (error) - goto fail3; + goto fail1; } - usb_fill_int_urb(wacom->irq, dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - wacom_wac->data, features->pktlen, - wacom_sys_irq, wacom, endpoint->bInterval); - wacom->irq->transfer_dma = wacom->data_dma; - wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - error = wacom_initialize_leds(wacom); if (error) - goto fail4; + goto fail2; if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { error = wacom_register_inputs(wacom); if (error) - goto fail5; + goto fail3; } /* Note that if query fails it is not a hard failure */ wacom_query_tablet_data(intf, features); - usb_set_intfdata(intf, wacom); + /* Regular HID work starts now */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "parse failed\n"); + goto fail4; + } - if (features->quirks & WACOM_QUIRK_MONITOR) { - if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { - error = -EIO; - goto fail5; - } + error = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (error) { + hid_err(hdev, "hw start failed\n"); + goto fail4; } + if (features->quirks & WACOM_QUIRK_MONITOR) + error = hid_hw_open(hdev); + if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) { if (wacom_wac->features.device_type == BTN_TOOL_FINGER) wacom_wac->shared->touch_input = wacom_wac->input; @@ -1462,78 +1420,60 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i return 0; - fail5: wacom_destroy_leds(wacom); - fail4: wacom_remove_shared_data(wacom_wac); - fail3: usb_free_urb(wacom->irq); - fail2: usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma); + fail4: wacom_unregister_inputs(wacom); + fail3: wacom_destroy_leds(wacom); + fail2: wacom_remove_shared_data(wacom_wac); fail1: kfree(wacom); + hid_set_drvdata(hdev, NULL); return error; } -static void wacom_disconnect(struct usb_interface *intf) +static void wacom_remove(struct hid_device *hdev) { - struct wacom *wacom = usb_get_intfdata(intf); + struct wacom *wacom = hid_get_drvdata(hdev); - usb_set_intfdata(intf, NULL); + hid_hw_stop(hdev); - usb_kill_urb(wacom->irq); cancel_work_sync(&wacom->work); wacom_unregister_inputs(wacom); wacom_destroy_battery(wacom); wacom_destroy_leds(wacom); - usb_free_urb(wacom->irq); - usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX, - wacom->wacom_wac.data, wacom->data_dma); wacom_remove_shared_data(&wacom->wacom_wac); - kfree(wacom); -} - -static int wacom_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct wacom *wacom = usb_get_intfdata(intf); - - mutex_lock(&wacom->lock); - usb_kill_urb(wacom->irq); - mutex_unlock(&wacom->lock); - return 0; + hid_set_drvdata(hdev, NULL); + kfree(wacom); } -static int wacom_resume(struct usb_interface *intf) +static int wacom_resume(struct hid_device *hdev) { - struct wacom *wacom = usb_get_intfdata(intf); + struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_features *features = &wacom->wacom_wac.features; - int rv = 0; mutex_lock(&wacom->lock); /* switch to wacom mode first */ - wacom_query_tablet_data(intf, features); + wacom_query_tablet_data(wacom->intf, features); wacom_led_control(wacom); - if ((wacom->open || (features->quirks & WACOM_QUIRK_MONITOR)) && - usb_submit_urb(wacom->irq, GFP_NOIO) < 0) - rv = -EIO; - mutex_unlock(&wacom->lock); - return rv; + return 0; } -static int wacom_reset_resume(struct usb_interface *intf) +static int wacom_reset_resume(struct hid_device *hdev) { - return wacom_resume(intf); + return wacom_resume(hdev); } -static struct usb_driver wacom_driver = { +static struct hid_driver wacom_driver = { .name = "wacom", .id_table = wacom_ids, .probe = wacom_probe, - .disconnect = wacom_disconnect, - .suspend = wacom_suspend, + .remove = wacom_remove, +#ifdef CONFIG_PM .resume = wacom_resume, .reset_resume = wacom_reset_resume, - .supports_autosuspend = 1, +#endif + .raw_event = wacom_raw_event, }; - -module_usb_driver(wacom_driver); +module_hid_driver(wacom_driver); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index f170277..1c95ce7 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2197,15 +2197,18 @@ static const struct wacom_features wacom_features_0x2A = static const struct wacom_features wacom_features_0x314 = { "Wacom Intuos Pro S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, 63, INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x315 = { "Wacom Intuos Pro M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x317 = { "Wacom Intuos Pro L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xF4 = { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104280, 65400, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; @@ -2215,7 +2218,8 @@ static const struct wacom_features wacom_features_0xF8 = .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 }; + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; @@ -2233,7 +2237,8 @@ static const struct wacom_features wacom_features_0xC7 = 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xCE = { "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, - 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE }; static const struct wacom_features wacom_features_0xF0 = { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2249,7 +2254,8 @@ static const struct wacom_features wacom_features_0x59 = /* Pen */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D }; static const struct wacom_features wacom_features_0x5D = /* Touch */ { "Wacom DTH2242", .type = WACOM_24HDT, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10 }; + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xCC = { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87000, 65400, 2047, 63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; @@ -2262,7 +2268,8 @@ static const struct wacom_features wacom_features_0x5B = .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x90 = { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2400,14 +2407,17 @@ static const struct wacom_features wacom_features_0x301 = static const struct wacom_features wacom_features_0x302 = { "Wacom Intuos PT S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16 }; + .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x303 = { "Wacom Intuos PT M", WACOM_PKGLEN_BBPEN, 21600, 13500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16 }; + .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x30E = { "Wacom Intuos S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, - 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2417,22 +2427,18 @@ static const struct wacom_features wacom_features_0x0307 = .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; static const struct wacom_features wacom_features_0x0309 = { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10 }; - -#define USB_DEVICE_WACOM(prod) \ - USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ - .driver_info = (kernel_ulong_t)&wacom_features_##prod + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -#define USB_DEVICE_DETAILED(prod, class, sub, proto) \ - USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_WACOM, prod, class, \ - sub, proto), \ - .driver_info = (kernel_ulong_t)&wacom_features_##prod +#define USB_DEVICE_WACOM(prod) \ + HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ + .driver_data = (kernel_ulong_t)&wacom_features_##prod #define USB_DEVICE_LENOVO(prod) \ - USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ - .driver_info = (kernel_ulong_t)&wacom_features_##prod + HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ + .driver_data = (kernel_ulong_t)&wacom_features_##prod -const struct usb_device_id wacom_ids[] = { +const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x00) }, { USB_DEVICE_WACOM(0x10) }, { USB_DEVICE_WACOM(0x11) }, @@ -2478,9 +2484,9 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x45) }, { USB_DEVICE_WACOM(0x57) }, { USB_DEVICE_WACOM(0x59) }, - { USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x5D) }, { USB_DEVICE_WACOM(0x5B) }, - { USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x5E) }, { USB_DEVICE_WACOM(0xB0) }, { USB_DEVICE_WACOM(0xB1) }, { USB_DEVICE_WACOM(0xB2) }, @@ -2502,13 +2508,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xC5) }, { USB_DEVICE_WACOM(0xC6) }, { USB_DEVICE_WACOM(0xC7) }, - /* - * DTU-2231 has two interfaces on the same configuration, - * only one is used. - */ - { USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID, - USB_INTERFACE_SUBCLASS_BOOT, - USB_INTERFACE_PROTOCOL_MOUSE) }, + { USB_DEVICE_WACOM(0xCE) }, { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0xD0) }, { USB_DEVICE_WACOM(0xD1) }, @@ -2546,13 +2546,13 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x116) }, { USB_DEVICE_WACOM(0x300) }, { USB_DEVICE_WACOM(0x301) }, - { USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x302) }, + { USB_DEVICE_WACOM(0x303) }, + { USB_DEVICE_WACOM(0x30E) }, { USB_DEVICE_WACOM(0x304) }, - { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) }, - { USB_DEVICE_DETAILED(0x317, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x314) }, + { USB_DEVICE_WACOM(0x315) }, + { USB_DEVICE_WACOM(0x317) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, @@ -2560,12 +2560,12 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, { USB_DEVICE_WACOM(0xF8) }, - { USB_DEVICE_DETAILED(0xF6, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0xF6) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_WACOM(0xFB) }, { USB_DEVICE_WACOM(0x0307) }, - { USB_DEVICE_DETAILED(0x0309, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_WACOM(0x0309) }, { USB_DEVICE_LENOVO(0x6004) }, { } }; -MODULE_DEVICE_TABLE(usb, wacom_ids); +MODULE_DEVICE_TABLE(hid, wacom_ids); diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index f48164c..8821a51 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -137,6 +137,8 @@ struct wacom_features { unsigned touch_max; int oVid; int oPid; + bool check_for_hid_type; + int hid_type; }; struct wacom_shared { @@ -151,7 +153,7 @@ struct wacom_shared { struct wacom_wac { char name[WACOM_NAME_MAX]; char pad_name[WACOM_NAME_MAX]; - unsigned char *data; + unsigned char data[WACOM_PKGLEN_MAX]; int tool[2]; int id[2]; __u32 serial[2]; diff --git a/include/linux/hid.h b/include/linux/hid.h index 77632cf..07fa806 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -311,6 +311,11 @@ struct hid_item { #define HID_GROUP_RMI 0x0100 /* + * Vendor specific HID device groups + */ +#define HID_GROUP_WACOM 0x0101 + +/* * This is the global environment of the parser. This information is * persistent for main-items. The global environment can be saved and * restored with PUSH/POP statements. -- cgit v0.10.2 From 27b20a9dec0cb1a4cc0517b94302875800191e34 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:56:22 -0700 Subject: Input: wacom - use hid communication instead of plain usb Wacom.ko was a plain USB driver for a HID device. The communications from/to the devices can actually be replaced with the HID API. At the USB level, the reports are exactly the same. This will allow to use uhid virtual devices instead of true USB devices. This step is necessary to implement regression tests. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 5ceeab6..120ab1b 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -34,11 +34,6 @@ struct wac_hid_descriptor { __le16 wDescriptorLength; } __attribute__ ((packed)); -/* defines to get/set USB message */ -#define USB_REQ_GET_REPORT 0x01 -#define USB_REQ_SET_REPORT 0x09 - -#define WAC_HID_FEATURE_REPORT 0x03 #define WAC_MSG_RETRIES 5 #define WAC_CMD_LED_CONTROL 0x20 @@ -46,38 +41,27 @@ struct wac_hid_descriptor { #define WAC_CMD_ICON_XFER 0x23 #define WAC_CMD_RETRIES 10 -static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id, +static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id, void *buf, size_t size, unsigned int retries) { - struct usb_device *dev = interface_to_usbdev(intf); int retval; do { - retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - USB_REQ_GET_REPORT, - USB_DIR_IN | USB_TYPE_CLASS | - USB_RECIP_INTERFACE, - (type << 8) + id, - intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 100); + retval = hid_hw_raw_request(hdev, id, buf, size, type, + HID_REQ_GET_REPORT); } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); return retval; } -static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id, +static int wacom_set_report(struct hid_device *hdev, u8 type, u8 id, void *buf, size_t size, unsigned int retries) { - struct usb_device *dev = interface_to_usbdev(intf); int retval; do { - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, - intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 1000); + retval = hid_hw_raw_request(hdev, id, buf, size, type, + HID_REQ_SET_REPORT); } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); return retval; @@ -188,7 +172,7 @@ static int wacom_parse_logical_collection(unsigned char *report, return length; } -static void wacom_retrieve_report_data(struct usb_interface *intf, +static void wacom_retrieve_report_data(struct hid_device *hdev, struct wacom_features *features) { int result = 0; @@ -198,7 +182,7 @@ static void wacom_retrieve_report_data(struct usb_interface *intf, if (rep_data) { rep_data[0] = 12; - result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT, + result = wacom_get_report(hdev, HID_FEATURE_REPORT, rep_data[0], rep_data, 2, WAC_MSG_RETRIES); @@ -245,10 +229,12 @@ static void wacom_retrieve_report_data(struct usb_interface *intf, * Intuos5 touch interface does not contain useful data. We deal with * this after returning from this function. */ -static int wacom_parse_hid(struct usb_interface *intf, +static int wacom_parse_hid(struct hid_device *hdev, struct wac_hid_descriptor *hid_desc, struct wacom_features *features) { + struct wacom *wacom = hid_get_drvdata(hdev); + struct usb_interface *intf = wacom->intf; struct usb_device *dev = interface_to_usbdev(intf); char limit = 0; /* result has to be defined as int for some devices */ @@ -435,7 +421,7 @@ static int wacom_parse_hid(struct usb_interface *intf, case HID_DG_CONTACTMAX: /* leave touch_max as is if predefined */ if (!features->touch_max) - wacom_retrieve_report_data(intf, features); + wacom_retrieve_report_data(hdev, features); i++; break; @@ -474,7 +460,8 @@ static int wacom_parse_hid(struct usb_interface *intf, return result; } -static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int length, int mode) +static int wacom_set_device_mode(struct hid_device *hdev, int report_id, + int length, int mode) { unsigned char *rep_data; int error = -ENOMEM, limit = 0; @@ -487,10 +474,10 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int rep_data[0] = report_id; rep_data[1] = mode; - error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, + error = wacom_set_report(hdev, HID_FEATURE_REPORT, report_id, rep_data, length, 1); if (error >= 0) - error = wacom_get_report(intf, WAC_HID_FEATURE_REPORT, + error = wacom_get_report(hdev, HID_FEATURE_REPORT, report_id, rep_data, length, 1); } while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES); @@ -506,29 +493,32 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int * from the tablet, it is necessary to switch the tablet out of this * mode and into one which sends the full range of tablet data. */ -static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features) +static int wacom_query_tablet_data(struct hid_device *hdev, + struct wacom_features *features) { if (features->device_type == BTN_TOOL_FINGER) { if (features->type > TABLETPC) { /* MT Tablet PC touch */ - return wacom_set_device_mode(intf, 3, 4, 4); + return wacom_set_device_mode(hdev, 3, 4, 4); } else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) { - return wacom_set_device_mode(intf, 18, 3, 2); + return wacom_set_device_mode(hdev, 18, 3, 2); } } else if (features->device_type == BTN_TOOL_PEN) { if (features->type <= BAMBOO_PT && features->type != WIRELESS) { - return wacom_set_device_mode(intf, 2, 2, 2); + return wacom_set_device_mode(hdev, 2, 2, 2); } } return 0; } -static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, +static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, struct wacom_features *features) { int error = 0; + struct wacom *wacom = hid_get_drvdata(hdev); + struct usb_interface *intf = wacom->intf; struct usb_host_interface *interface = intf->cur_altsetting; struct wac_hid_descriptor *hid_desc; @@ -564,12 +554,12 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, error = usb_get_extra_descriptor(&interface->endpoint[0], HID_DEVICET_REPORT, &hid_desc); if (error) { - dev_err(&intf->dev, + hid_err(hdev, "can not retrieve extra class descriptor\n"); goto out; } } - error = wacom_parse_hid(intf, hid_desc, features); + error = wacom_parse_hid(hdev, hid_desc, features); out: return error; @@ -711,8 +701,8 @@ static int wacom_led_control(struct wacom *wacom) buf[4] = wacom->led.img_lum; } - retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL, - buf, 9, WAC_CMD_RETRIES); + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_LED_CONTROL, buf, 9, WAC_CMD_RETRIES); kfree(buf); return retval; @@ -730,8 +720,8 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *im /* Send 'start' command */ buf[0] = WAC_CMD_ICON_START; buf[1] = 1; - retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START, - buf, 2, WAC_CMD_RETRIES); + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_ICON_START, buf, 2, WAC_CMD_RETRIES); if (retval < 0) goto out; @@ -741,7 +731,8 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *im buf[2] = i; memcpy(buf + 3, img + i * 256, 256); - retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_XFER, + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_ICON_XFER, buf, 259, WAC_CMD_RETRIES); if (retval < 0) break; @@ -750,7 +741,7 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *im /* Send 'stop' */ buf[0] = WAC_CMD_ICON_START; buf[1] = 0; - wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START, + wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, WAC_CMD_ICON_START, buf, 2, WAC_CMD_RETRIES); out: @@ -1331,7 +1322,7 @@ static int wacom_probe(struct hid_device *hdev, wacom_set_default_phy(features); /* Retrieve the physical and logical size for touch devices */ - error = wacom_retrieve_hid_descriptor(intf, features); + error = wacom_retrieve_hid_descriptor(hdev, features); if (error) goto fail1; @@ -1395,7 +1386,7 @@ static int wacom_probe(struct hid_device *hdev, } /* Note that if query fails it is not a hard failure */ - wacom_query_tablet_data(intf, features); + wacom_query_tablet_data(hdev, features); /* Regular HID work starts now */ error = hid_parse(hdev); @@ -1452,7 +1443,7 @@ static int wacom_resume(struct hid_device *hdev) mutex_lock(&wacom->lock); /* switch to wacom mode first */ - wacom_query_tablet_data(wacom->intf, features); + wacom_query_tablet_data(hdev, features); wacom_led_control(wacom); mutex_unlock(&wacom->lock); -- cgit v0.10.2 From ba9a3541fba72e1532c8288a0775a211810280c1 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:58:45 -0700 Subject: Input: wacom - use HID core to actually fetch the report descriptor HID core already retrieves the report descritor. There is no need to ask ourself for one. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 120ab1b..2c0983b 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -15,9 +15,6 @@ #include "wacom.h" #include -/* defines to get HID report descriptor */ -#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) -#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) #define HID_HDESC_USAGE_UNDEFINED 0x00 #define HID_HDESC_USAGE_PAGE 0x05 #define HID_HDESC_USAGE 0x09 @@ -25,15 +22,6 @@ #define HID_HDESC_COLLECTION_LOGICAL 0x02 #define HID_HDESC_COLLECTION_END 0xc0 -struct wac_hid_descriptor { - struct usb_descriptor_header header; - __le16 bcdHID; - u8 bCountryCode; - u8 bNumDescriptors; - u8 bDescriptorType; - __le16 wDescriptorLength; -} __attribute__ ((packed)); - #define WAC_MSG_RETRIES 5 #define WAC_CMD_LED_CONTROL 0x20 @@ -230,39 +218,14 @@ static void wacom_retrieve_report_data(struct hid_device *hdev, * this after returning from this function. */ static int wacom_parse_hid(struct hid_device *hdev, - struct wac_hid_descriptor *hid_desc, struct wacom_features *features) { - struct wacom *wacom = hid_get_drvdata(hdev); - struct usb_interface *intf = wacom->intf; - struct usb_device *dev = interface_to_usbdev(intf); - char limit = 0; /* result has to be defined as int for some devices */ int result = 0, touch_max = 0; int i = 0, page = 0, finger = 0, pen = 0; - unsigned char *report; + unsigned char *report = hdev->rdesc; - report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); - if (!report) - return -ENOMEM; - - /* retrive report descriptors */ - do { - result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - USB_REQ_GET_DESCRIPTOR, - USB_RECIP_INTERFACE | USB_DIR_IN, - HID_DEVICET_REPORT << 8, - intf->altsetting[0].desc.bInterfaceNumber, /* interface */ - report, - hid_desc->wDescriptorLength, - 5000); /* 5 secs */ - } while (result < 0 && limit++ < WAC_MSG_RETRIES); - - /* No need to parse the Descriptor. It isn't an error though */ - if (result < 0) - goto out; - - for (i = 0; i < hid_desc->wDescriptorLength; i++) { + for (i = 0; i < hdev->rsize; i++) { switch (report[i]) { case HID_HDESC_USAGE_PAGE: @@ -452,11 +415,9 @@ static int wacom_parse_hid(struct hid_device *hdev, } } - out: if (!features->touch_max && touch_max) features->touch_max = touch_max; result = 0; - kfree(report); return result; } @@ -519,8 +480,6 @@ static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, int error = 0; struct wacom *wacom = hid_get_drvdata(hdev); struct usb_interface *intf = wacom->intf; - struct usb_host_interface *interface = intf->cur_altsetting; - struct wac_hid_descriptor *hid_desc; /* default features */ features->device_type = BTN_TOOL_PEN; @@ -549,17 +508,7 @@ static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, goto out; } - error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc); - if (error) { - error = usb_get_extra_descriptor(&interface->endpoint[0], - HID_DEVICET_REPORT, &hid_desc); - if (error) { - hid_err(hdev, - "can not retrieve extra class descriptor\n"); - goto out; - } - } - error = wacom_parse_hid(hdev, hid_desc, features); + error = wacom_parse_hid(hdev, features); out: return error; @@ -1296,6 +1245,13 @@ static int wacom_probe(struct hid_device *hdev, hid_set_drvdata(hdev, wacom); wacom->hdev = hdev; + /* ask for the report descriptor to be loaded by HID */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "parse failed\n"); + goto fail1; + } + wacom_wac = &wacom->wacom_wac; wacom_wac->features = *((struct wacom_features *)id->driver_data); features = &wacom_wac->features; @@ -1389,12 +1345,6 @@ static int wacom_probe(struct hid_device *hdev, wacom_query_tablet_data(hdev, features); /* Regular HID work starts now */ - error = hid_parse(hdev); - if (error) { - hid_err(hdev, "parse failed\n"); - goto fail4; - } - error = hid_hw_start(hdev, HID_CONNECT_HIDRAW); if (error) { hid_err(hdev, "hw start failed\n"); -- cgit v0.10.2 From 01c846f9539c194c7a6e34af036b1115b8ed822a Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:59:11 -0700 Subject: Input: wacom - compute the HID report size to get the actual packet size This removes an USB dependency and is more accurate: the computed pktlen is the actual maximum size of the reports forwarded by the device. Given that the pktlen is correctly computed/validated, we can store it now in the features struct instead of having a special handling in the rest of the code. Likewise, this information is not mandatory anymore in the description of devices in wacom_wac.c. They will be removed in a separate patch. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c0983b..ce76e1e 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -149,7 +149,6 @@ static int wacom_parse_logical_collection(unsigned char *report, if (features->type == BAMBOO_PT) { /* Logical collection is only used by 3rd gen Bamboo Touch */ - features->pktlen = WACOM_PKGLEN_BBTOUCH3; features->device_type = BTN_TOOL_FINGER; features->x_max = features->y_max = @@ -240,29 +239,6 @@ static int wacom_parse_hid(struct hid_device *hdev, features->device_type = BTN_TOOL_FINGER; /* touch device at least supports one touch point */ touch_max = 1; - switch (features->type) { - case TABLETPC2FG: - features->pktlen = WACOM_PKGLEN_TPC2FG; - break; - - case MTSCREEN: - case WACOM_24HDT: - features->pktlen = WACOM_PKGLEN_MTOUCH; - break; - - case MTTPC: - case MTTPC_B: - features->pktlen = WACOM_PKGLEN_MTTPC; - break; - - case BAMBOO_PT: - features->pktlen = WACOM_PKGLEN_BBTOUCH; - break; - - default: - features->pktlen = WACOM_PKGLEN_GRAPHIRE; - break; - } switch (features->type) { case BAMBOO_PT: @@ -305,8 +281,6 @@ static int wacom_parse_hid(struct hid_device *hdev, } } else if (pen) { /* penabled only accepts exact bytes of data */ - if (features->type >= TABLETPC) - features->pktlen = WACOM_PKGLEN_GRAPHIRE; features->device_type = BTN_TOOL_PEN; features->x_max = get_unaligned_le16(&report[i + 3]); @@ -1224,12 +1198,34 @@ static void wacom_calculate_res(struct wacom_features *features) features->unitExpo); } +static int wacom_hid_report_len(struct hid_report *report) +{ + /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ + return ((report->size - 1) >> 3) + 1 + (report->id > 0); +} + +static size_t wacom_compute_pktlen(struct hid_device *hdev) +{ + struct hid_report_enum *report_enum; + struct hid_report *report; + size_t size = 0; + + report_enum = hdev->report_enum + HID_INPUT_REPORT; + + list_for_each_entry(report, &report_enum->report_list, list) { + size_t report_size = wacom_hid_report_len(report); + if (report_size > size) + size = report_size; + } + + return size; +} + static int wacom_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; struct wacom_wac *wacom_wac; struct wacom_features *features; @@ -1255,6 +1251,7 @@ static int wacom_probe(struct hid_device *hdev, wacom_wac = &wacom->wacom_wac; wacom_wac->features = *((struct wacom_features *)id->driver_data); features = &wacom_wac->features; + features->pktlen = wacom_compute_pktlen(hdev); if (features->pktlen > WACOM_PKGLEN_MAX) { error = -EINVAL; goto fail1; @@ -1272,8 +1269,6 @@ static int wacom_probe(struct hid_device *hdev, usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - /* set the default size in case we do not get them from hid */ wacom_set_default_phy(features); @@ -1284,13 +1279,12 @@ static int wacom_probe(struct hid_device *hdev, /* * Intuos5 has no useful data about its touch interface in its - * HID descriptor. If this is the touch interface (wMaxPacketSize + * HID descriptor. If this is the touch interface (PacketSize * of WACOM_PKGLEN_BBTOUCH3), override the table values. */ if (features->type >= INTUOS5S && features->type <= INTUOSHT) { - if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) { + if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { features->device_type = BTN_TOOL_FINGER; - features->pktlen = WACOM_PKGLEN_BBTOUCH3; features->x_max = 4096; features->y_max = 4096; -- cgit v0.10.2 From c31a408f7a44cd5fd134a7f0c0d29744261de2d9 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 12:59:45 -0700 Subject: Input: wacom - install LED/OLED sysfs files in the HID device instead of USB Removes one more dependency over USB, but requires some changes in the user space to find the sysfs files correctly. This patch breaks the user space. However, the number of program accessing the LEDs is quite limited and we can easily patch them to handle the new HID behavior. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index ce76e1e..6e21064 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -675,7 +675,7 @@ out: static ssize_t wacom_led_select_store(struct device *dev, int set_id, const char *buf, size_t count) { - struct hid_device *hdev = dev_get_drvdata(dev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); struct wacom *wacom = hid_get_drvdata(hdev); unsigned int id; int err; @@ -703,7 +703,7 @@ static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \ static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ - struct hid_device *hdev = dev_get_drvdata(dev); \ + struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ struct wacom *wacom = hid_get_drvdata(hdev); \ return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \ } \ @@ -738,7 +738,7 @@ static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest, static ssize_t wacom_##name##_luminance_store(struct device *dev, \ struct device_attribute *attr, const char *buf, size_t count) \ { \ - struct hid_device *hdev = dev_get_drvdata(dev); \ + struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ struct wacom *wacom = hid_get_drvdata(hdev); \ \ return wacom_luminance_store(wacom, &wacom->led.field, \ @@ -754,7 +754,7 @@ DEVICE_LUMINANCE_ATTR(buttons, img_lum); static ssize_t wacom_button_image_store(struct device *dev, int button_id, const char *buf, size_t count) { - struct hid_device *hdev = dev_get_drvdata(dev); + struct hid_device *hdev = container_of(dev, struct hid_device, dev); struct wacom *wacom = hid_get_drvdata(hdev); int err; @@ -845,7 +845,7 @@ static int wacom_initialize_leds(struct wacom *wacom) wacom->led.llv = 10; wacom->led.hlv = 20; wacom->led.img_lum = 10; - error = sysfs_create_group(&wacom->intf->dev.kobj, + error = sysfs_create_group(&wacom->hdev->dev.kobj, &intuos4_led_attr_group); break; @@ -857,7 +857,7 @@ static int wacom_initialize_leds(struct wacom *wacom) wacom->led.hlv = 0; wacom->led.img_lum = 0; - error = sysfs_create_group(&wacom->intf->dev.kobj, + error = sysfs_create_group(&wacom->hdev->dev.kobj, &cintiq_led_attr_group); break; @@ -874,7 +874,7 @@ static int wacom_initialize_leds(struct wacom *wacom) wacom->led.hlv = 0; wacom->led.img_lum = 0; - error = sysfs_create_group(&wacom->intf->dev.kobj, + error = sysfs_create_group(&wacom->hdev->dev.kobj, &intuos5_led_attr_group); } else return 0; @@ -885,7 +885,7 @@ static int wacom_initialize_leds(struct wacom *wacom) } if (error) { - dev_err(&wacom->intf->dev, + hid_err(wacom->hdev, "cannot create sysfs group err: %d\n", error); return error; } @@ -900,13 +900,13 @@ static void wacom_destroy_leds(struct wacom *wacom) case INTUOS4S: case INTUOS4: case INTUOS4L: - sysfs_remove_group(&wacom->intf->dev.kobj, + sysfs_remove_group(&wacom->hdev->dev.kobj, &intuos4_led_attr_group); break; case WACOM_24HD: case WACOM_21UX2: - sysfs_remove_group(&wacom->intf->dev.kobj, + sysfs_remove_group(&wacom->hdev->dev.kobj, &cintiq_led_attr_group); break; @@ -917,7 +917,7 @@ static void wacom_destroy_leds(struct wacom *wacom) case INTUOSPM: case INTUOSPL: if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) - sysfs_remove_group(&wacom->intf->dev.kobj, + sysfs_remove_group(&wacom->hdev->dev.kobj, &intuos5_led_attr_group); break; } -- cgit v0.10.2 From b6c79f2ca1032e2da7ad8523b83f0cf5cc04dbc0 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:00:03 -0700 Subject: Input: wacom - register the input devices on top of the HID one Matches the current behavior of the HID subsystem and removes one more dependency over USB. The current user space clients which relies on this to fetch the LEDs path need an update. However, we already break them in the kernel v3.11 for the Bluetooth Wacom devices. They are going to be fixed soon. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index b921239..dd67b7d 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -112,7 +112,6 @@ struct wacom { struct hid_device *hdev; struct mutex lock; struct work_struct work; - char phys[32]; struct wacom_led { u8 select[2]; /* status led selector (0..3) */ u8 llv; /* status led brightness no button (1..127) */ diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 6e21064..2650443 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -986,8 +986,7 @@ static void wacom_destroy_battery(struct wacom *wacom) static struct input_dev *wacom_allocate_input(struct wacom *wacom) { struct input_dev *input_dev; - struct usb_interface *intf = wacom->intf; - struct usb_device *dev = interface_to_usbdev(intf); + struct hid_device *hdev = wacom->hdev; struct wacom_wac *wacom_wac = &(wacom->wacom_wac); input_dev = input_allocate_device(); @@ -995,11 +994,15 @@ static struct input_dev *wacom_allocate_input(struct wacom *wacom) return NULL; input_dev->name = wacom_wac->name; - input_dev->phys = wacom->phys; - input_dev->dev.parent = &intf->dev; + input_dev->phys = hdev->phys; + input_dev->dev.parent = &hdev->dev; input_dev->open = wacom_open; input_dev->close = wacom_close; - usb_to_input_id(dev, &input_dev->id); + input_dev->uniq = hdev->uniq; + input_dev->id.bustype = hdev->bus; + input_dev->id.vendor = hdev->vendor; + input_dev->id.product = hdev->product; + input_dev->id.version = hdev->version; input_set_drvdata(input_dev, wacom); return input_dev; @@ -1266,8 +1269,6 @@ static int wacom_probe(struct hid_device *hdev, wacom->intf = intf; mutex_init(&wacom->lock); INIT_WORK(&wacom->work, wacom_wireless_work); - usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); - strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); /* set the default size in case we do not get them from hid */ wacom_set_default_phy(features); -- cgit v0.10.2 From 4451e088cf01184379da1b212913fdde6e9943c5 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:01:05 -0700 Subject: Input: wacom - remove usb dependency for siblings devices Wacom tablets can share different physical sensors on one physical device. These are called siblings in the code. The current way of implementation relies on the USB topology to be able to share data amongs those sensors. We can replace the code to match a HID subsystem, without involving the USB topology: - the first probed sensor does not find any siblings in the list wacom_udev_list, so it creates its own wacom_hdev_data with its own struct hid_device - the other sensor checks the current list of siblings in wacom_hdev_data, and if there is a match, it associates itself to the matched device. To be sure that we are not associating different sensors from different physical devices, we also check for the phys path of the hid device which contains the USB topology. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2650443..8065bac 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -488,46 +488,48 @@ static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, return error; } -struct wacom_usbdev_data { +struct wacom_hdev_data { struct list_head list; struct kref kref; - struct usb_device *dev; + struct hid_device *dev; struct wacom_shared shared; }; static LIST_HEAD(wacom_udev_list); static DEFINE_MUTEX(wacom_udev_list_lock); -static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product) +static bool wacom_are_sibling(struct hid_device *hdev, + struct hid_device *sibling) { - int port1; - struct usb_device *sibling; - - if (vendor == 0 && product == 0) - return dev; + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + int vid = features->oVid; + int pid = features->oPid; + int n1,n2; - if (dev->parent == NULL) - return NULL; + if (vid == 0 && pid == 0) { + vid = hdev->vendor; + pid = hdev->product; + } - usb_hub_for_each_child(dev->parent, port1, sibling) { - struct usb_device_descriptor *d; - if (sibling == NULL) - continue; + if (vid != sibling->vendor || pid != sibling->product) + return false; - d = &sibling->descriptor; - if (d->idVendor == vendor && d->idProduct == product) - return sibling; - } + /* Compare the physical path. */ + n1 = strrchr(hdev->phys, '.') - hdev->phys; + n2 = strrchr(sibling->phys, '.') - sibling->phys; + if (n1 != n2 || n1 <= 0 || n2 <= 0) + return false; - return NULL; + return !strncmp(hdev->phys, sibling->phys, n1); } -static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev) +static struct wacom_hdev_data *wacom_get_hdev_data(struct hid_device *hdev) { - struct wacom_usbdev_data *data; + struct wacom_hdev_data *data; list_for_each_entry(data, &wacom_udev_list, list) { - if (data->dev == dev) { + if (wacom_are_sibling(hdev, data->dev)) { kref_get(&data->kref); return data; } @@ -536,28 +538,29 @@ static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev) return NULL; } -static int wacom_add_shared_data(struct wacom_wac *wacom, - struct usb_device *dev) +static int wacom_add_shared_data(struct hid_device *hdev) { - struct wacom_usbdev_data *data; + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_wac *wacom_wac = &wacom->wacom_wac; + struct wacom_hdev_data *data; int retval = 0; mutex_lock(&wacom_udev_list_lock); - data = wacom_get_usbdev_data(dev); + data = wacom_get_hdev_data(hdev); if (!data) { - data = kzalloc(sizeof(struct wacom_usbdev_data), GFP_KERNEL); + data = kzalloc(sizeof(struct wacom_hdev_data), GFP_KERNEL); if (!data) { retval = -ENOMEM; goto out; } kref_init(&data->kref); - data->dev = dev; + data->dev = hdev; list_add_tail(&data->list, &wacom_udev_list); } - wacom->shared = &data->shared; + wacom_wac->shared = &data->shared; out: mutex_unlock(&wacom_udev_list_lock); @@ -566,8 +569,8 @@ out: static void wacom_release_shared_data(struct kref *kref) { - struct wacom_usbdev_data *data = - container_of(kref, struct wacom_usbdev_data, kref); + struct wacom_hdev_data *data = + container_of(kref, struct wacom_hdev_data, kref); mutex_lock(&wacom_udev_list_lock); list_del(&data->list); @@ -578,10 +581,10 @@ static void wacom_release_shared_data(struct kref *kref) static void wacom_remove_shared_data(struct wacom_wac *wacom) { - struct wacom_usbdev_data *data; + struct wacom_hdev_data *data; if (wacom->shared) { - data = container_of(wacom->shared, struct wacom_usbdev_data, shared); + data = container_of(wacom->shared, struct wacom_hdev_data, shared); kref_put(&data->kref, wacom_release_shared_data); wacom->shared = NULL; } @@ -1308,8 +1311,6 @@ static int wacom_probe(struct hid_device *hdev, "%s Pad", features->name); if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { - struct usb_device *other_dev; - /* Append the device type to the name */ if (features->device_type != BTN_TOOL_FINGER) strlcat(wacom_wac->name, " Pen", WACOM_NAME_MAX); @@ -1318,10 +1319,7 @@ static int wacom_probe(struct hid_device *hdev, else strlcat(wacom_wac->name, " Pad", WACOM_NAME_MAX); - other_dev = wacom_get_sibling(dev, features->oVid, features->oPid); - if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL) - other_dev = dev; - error = wacom_add_shared_data(wacom_wac, other_dev); + error = wacom_add_shared_data(hdev); if (error) goto fail1; } -- cgit v0.10.2 From dd3181a70cb73c4f40cfe33ecdd6260ff3fbf8cc Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:01:40 -0700 Subject: Input: wacom - register power device at the HID level Use the HID device as the parent for the power device when dealing with a wireless receiver. Removes one more usb dependency and does not break user space. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 8065bac..b871059 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -966,12 +966,12 @@ static int wacom_initialize_battery(struct wacom *wacom) wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; wacom->battery.use_for_apm = 0; - error = power_supply_register(&wacom->usbdev->dev, + error = power_supply_register(&wacom->hdev->dev, &wacom->battery); if (!error) power_supply_powers(&wacom->battery, - &wacom->usbdev->dev); + &wacom->hdev->dev); } return error; -- cgit v0.10.2 From e2114ce1af0dd8c1e077b6d545e346e9ac4d137c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:01:56 -0700 Subject: Input: wacom - use hid_info instead of plain dev_info Removes one more need of usb and intf. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index b871059..2c1d984 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1104,12 +1104,11 @@ static void wacom_wireless_work(struct work_struct *work) wacom_unregister_inputs(wacom2); if (wacom_wac->pid == 0) { - dev_info(&wacom->intf->dev, "wireless tablet disconnected\n"); + hid_info(wacom->hdev, "wireless tablet disconnected\n"); } else { const struct hid_device_id *id = wacom_ids; - dev_info(&wacom->intf->dev, - "wireless tablet connected with PID %x\n", + hid_info(wacom->hdev, "wireless tablet connected with PID %x\n", wacom_wac->pid); while (id->bus) { @@ -1120,8 +1119,7 @@ static void wacom_wireless_work(struct work_struct *work) } if (!id->bus) { - dev_info(&wacom->intf->dev, - "ignoring unknown PID.\n"); + hid_info(wacom->hdev, "ignoring unknown PID.\n"); return; } -- cgit v0.10.2 From c669fb2b9ac47682b53f0a97d55c7ae4f2f3eaee Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:02:14 -0700 Subject: Input: wacom - use in-kernel HID parser HID already parses the report descriptor, so use it instead of implementing our own. The special case for Bamboo PT 3rd gen is also removed and handled in the same way Intuos 5 is treated, by hardcoding it in the driver. Last, the unit_exponent stored into the hid field already is signed, so there is no need to handle a two's complement anymore. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c1d984..ed27e7d 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -15,13 +15,6 @@ #include "wacom.h" #include -#define HID_HDESC_USAGE_UNDEFINED 0x00 -#define HID_HDESC_USAGE_PAGE 0x05 -#define HID_HDESC_USAGE 0x09 -#define HID_HDESC_COLLECTION 0xa1 -#define HID_HDESC_COLLECTION_LOGICAL 0x02 -#define HID_HDESC_COLLECTION_END 0xc0 - #define WAC_MSG_RETRIES 5 #define WAC_CMD_LED_CONTROL 0x20 @@ -96,19 +89,15 @@ static void wacom_close(struct input_dev *dev) * This function is little more than hidinput_calc_abs_res stripped down. */ static int wacom_calc_hid_res(int logical_extents, int physical_extents, - unsigned char unit, unsigned char exponent) + unsigned unit, int exponent) { - int prev, unit_exponent; + int prev; + int unit_exponent = exponent; /* Check if the extents are sane */ if (logical_extents <= 0 || physical_extents <= 0) return 0; - /* Get signed value of nybble-sized twos-compliment exponent */ - unit_exponent = exponent; - if (unit_exponent > 7) - unit_exponent -= 16; - /* Convert physical_extents to millimeters */ if (unit == 0x11) { /* If centimeters */ unit_exponent += 1; @@ -141,42 +130,18 @@ static int wacom_calc_hid_res(int logical_extents, int physical_extents, return logical_extents / physical_extents; } -static int wacom_parse_logical_collection(unsigned char *report, - struct wacom_features *features) -{ - int length = 0; - - if (features->type == BAMBOO_PT) { - - /* Logical collection is only used by 3rd gen Bamboo Touch */ - features->device_type = BTN_TOOL_FINGER; - - features->x_max = features->y_max = - get_unaligned_le16(&report[10]); - - length = 11; - } - return length; -} - -static void wacom_retrieve_report_data(struct hid_device *hdev, - struct wacom_features *features) +static void wacom_feature_mapping(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage) { - int result = 0; - unsigned char *rep_data; - - rep_data = kmalloc(2, GFP_KERNEL); - if (rep_data) { - - rep_data[0] = 12; - result = wacom_get_report(hdev, HID_FEATURE_REPORT, - rep_data[0], rep_data, 2, - WAC_MSG_RETRIES); - - if (result >= 0 && rep_data[1] > 2) - features->touch_max = rep_data[1]; + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; - kfree(rep_data); + switch (usage->hid) { + case HID_DG_CONTACTMAX: + /* leave touch_max as is if predefined */ + if (!features->touch_max) + features->touch_max = field->value[0]; + break; } } @@ -209,190 +174,96 @@ static void wacom_retrieve_report_data(struct hid_device *hdev, * interfaces haven't supported pressure or distance, this is enough * information to override invalid values in the wacom_features table. * - * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical - * Collection. Instead they define a Logical Collection with a single - * Logical Maximum for both X and Y. - * - * Intuos5 touch interface does not contain useful data. We deal with - * this after returning from this function. + * Intuos5 touch interface and 3rd gen Bamboo Touch do not contain useful + * data. We deal with them after returning from this function. */ -static int wacom_parse_hid(struct hid_device *hdev, - struct wacom_features *features) +static void wacom_usage_mapping(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage) { - /* result has to be defined as int for some devices */ - int result = 0, touch_max = 0; - int i = 0, page = 0, finger = 0, pen = 0; - unsigned char *report = hdev->rdesc; - - for (i = 0; i < hdev->rsize; i++) { - - switch (report[i]) { - case HID_HDESC_USAGE_PAGE: - page = report[i + 1]; - i++; - break; - - case HID_HDESC_USAGE: - switch (page << 16 | report[i + 1]) { - case HID_GD_X: - if (finger) { - features->device_type = BTN_TOOL_FINGER; - /* touch device at least supports one touch point */ - touch_max = 1; - - switch (features->type) { - case BAMBOO_PT: - features->x_phy = - get_unaligned_le16(&report[i + 5]); - features->x_max = - get_unaligned_le16(&report[i + 8]); - i += 15; - break; - - case WACOM_24HDT: - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 8]); - features->unit = report[i - 1]; - features->unitExpo = report[i - 3]; - i += 12; - break; - - case MTTPC_B: - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 6]); - features->unit = report[i - 5]; - features->unitExpo = report[i - 3]; - i += 9; - break; - - default: - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 6]); - features->unit = report[i + 9]; - features->unitExpo = report[i + 11]; - i += 12; - break; - } - } else if (pen) { - /* penabled only accepts exact bytes of data */ - features->device_type = BTN_TOOL_PEN; - features->x_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - } - break; - - case HID_GD_Y: - if (finger) { - switch (features->type) { - case TABLETPC2FG: - case MTSCREEN: - case MTTPC: - features->y_max = - get_unaligned_le16(&report[i + 3]); - features->y_phy = - get_unaligned_le16(&report[i + 6]); - i += 7; - break; - - case WACOM_24HDT: - features->y_max = - get_unaligned_le16(&report[i + 3]); - features->y_phy = - get_unaligned_le16(&report[i - 2]); - i += 7; - break; - - case BAMBOO_PT: - features->y_phy = - get_unaligned_le16(&report[i + 3]); - features->y_max = - get_unaligned_le16(&report[i + 6]); - i += 12; - break; - - case MTTPC_B: - features->y_max = - get_unaligned_le16(&report[i + 3]); - features->y_phy = - get_unaligned_le16(&report[i + 6]); - i += 9; - break; - - default: - features->y_max = - features->x_max; - features->y_phy = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; - } - } else if (pen) { - features->y_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - } - break; - - case HID_DG_FINGER: - finger = 1; - i++; - break; - - /* - * Requiring Stylus Usage will ignore boot mouse - * X/Y values and some cases of invalid Digitizer X/Y - * values commonly reported. - */ - case HID_DG_STYLUS: - pen = 1; - i++; - break; - - case HID_DG_CONTACTMAX: - /* leave touch_max as is if predefined */ - if (!features->touch_max) - wacom_retrieve_report_data(hdev, features); - i++; - break; + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + bool finger = (field->logical == HID_DG_FINGER) || + (field->physical == HID_DG_FINGER); + bool pen = (field->logical == HID_DG_STYLUS) || + (field->physical == HID_DG_STYLUS); - case HID_DG_TIPPRESSURE: - if (pen) { - features->pressure_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - } - break; + /* + * Requiring Stylus Usage will ignore boot mouse + * X/Y values and some cases of invalid Digitizer X/Y + * values commonly reported. + */ + if (!pen && !finger) + return; + + if (finger && !features->touch_max) + /* touch device at least supports one touch point */ + features->touch_max = 1; + + switch (usage->hid) { + case HID_GD_X: + features->x_max = field->logical_maximum; + if (finger) { + features->device_type = BTN_TOOL_FINGER; + features->x_phy = field->physical_maximum; + if (features->type != BAMBOO_PT) { + features->unit = field->unit; + features->unitExpo = field->unit_exponent; } - break; - - case HID_HDESC_COLLECTION_END: - /* reset UsagePage and Finger */ - finger = page = 0; - break; + } else { + features->device_type = BTN_TOOL_PEN; + } + break; + case HID_GD_Y: + features->y_max = field->logical_maximum; + if (finger) { + features->y_phy = field->physical_maximum; + if (features->type != BAMBOO_PT) { + features->unit = field->unit; + features->unitExpo = field->unit_exponent; + } + } + break; + case HID_DG_TIPPRESSURE: + if (pen) + features->pressure_max = field->logical_maximum; + break; + } +} - case HID_HDESC_COLLECTION: - i++; - switch (report[i]) { - case HID_HDESC_COLLECTION_LOGICAL: - i += wacom_parse_logical_collection(&report[i], - features); - break; +static void wacom_parse_hid(struct hid_device *hdev, + struct wacom_features *features) +{ + struct hid_report_enum *rep_enum; + struct hid_report *hreport; + int i, j; + + /* check features first */ + rep_enum = &hdev->report_enum[HID_FEATURE_REPORT]; + list_for_each_entry(hreport, &rep_enum->report_list, list) { + for (i = 0; i < hreport->maxfield; i++) { + /* Ignore if report count is out of bounds. */ + if (hreport->field[i]->report_count < 1) + continue; + + for (j = 0; j < hreport->field[i]->maxusage; j++) { + wacom_feature_mapping(hdev, hreport->field[i], + hreport->field[i]->usage + j); } - break; } } - if (!features->touch_max && touch_max) - features->touch_max = touch_max; - result = 0; - return result; + /* now check the input usages */ + rep_enum = &hdev->report_enum[HID_INPUT_REPORT]; + list_for_each_entry(hreport, &rep_enum->report_list, list) { + + if (!hreport->maxfield) + continue; + + for (i = 0; i < hreport->maxfield; i++) + for (j = 0; j < hreport->field[i]->maxusage; j++) + wacom_usage_mapping(hdev, hreport->field[i], + hreport->field[i]->usage + j); + } } static int wacom_set_device_mode(struct hid_device *hdev, int report_id, @@ -448,10 +319,9 @@ static int wacom_query_tablet_data(struct hid_device *hdev, return 0; } -static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, +static void wacom_retrieve_hid_descriptor(struct hid_device *hdev, struct wacom_features *features) { - int error = 0; struct wacom *wacom = hid_get_drvdata(hdev); struct usb_interface *intf = wacom->intf; @@ -478,14 +348,10 @@ static int wacom_retrieve_hid_descriptor(struct hid_device *hdev, } /* only devices that support touch need to retrieve the info */ - if (features->type < BAMBOO_PT) { - goto out; - } + if (features->type < BAMBOO_PT) + return; - error = wacom_parse_hid(hdev, features); - - out: - return error; + wacom_parse_hid(hdev, features); } struct wacom_hdev_data { @@ -1275,9 +1141,7 @@ static int wacom_probe(struct hid_device *hdev, wacom_set_default_phy(features); /* Retrieve the physical and logical size for touch devices */ - error = wacom_retrieve_hid_descriptor(hdev, features); - if (error) - goto fail1; + wacom_retrieve_hid_descriptor(hdev, features); /* * Intuos5 has no useful data about its touch interface in its @@ -1295,12 +1159,24 @@ static int wacom_probe(struct hid_device *hdev, } } + /* + * Same thing for Bamboo 3rd gen. + */ + if ((features->type == BAMBOO_PT) && + (features->pktlen == WACOM_PKGLEN_BBTOUCH3) && + (features->device_type == BTN_TOOL_PEN)) { + features->device_type = BTN_TOOL_FINGER; + + features->x_max = 4096; + features->y_max = 4096; + } + wacom_setup_device_quirks(features); /* set unit to "100th of a mm" for devices not reported by HID */ if (!features->unit) { features->unit = 0x11; - features->unitExpo = 16 - 3; + features->unitExpo = -3; } wacom_calculate_res(features); diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 8821a51..2a7612a 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -127,8 +127,8 @@ struct wacom_features { int device_type; int x_phy; int y_phy; - unsigned char unit; - unsigned char unitExpo; + unsigned unit; + int unitExpo; int x_fuzz; int y_fuzz; int pressure_fuzz; -- cgit v0.10.2 From 198fdee2829547ec4ff29bb56ea668790d23bc4b Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:03:05 -0700 Subject: Input: wacom - use hidinput_calc_abs_res instead of duplicating its code This may infer a small difference with the previous implementation due to the DIV_ROUND_CLOSEST() in the hid implementation. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index ed27e7d..06e304b 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -85,49 +85,19 @@ static void wacom_close(struct input_dev *dev) } /* - * Calculate the resolution of the X or Y axis, given appropriate HID data. - * This function is little more than hidinput_calc_abs_res stripped down. + * Calculate the resolution of the X or Y axis using hidinput_calc_abs_res. */ static int wacom_calc_hid_res(int logical_extents, int physical_extents, unsigned unit, int exponent) { - int prev; - int unit_exponent = exponent; - - /* Check if the extents are sane */ - if (logical_extents <= 0 || physical_extents <= 0) - return 0; - - /* Convert physical_extents to millimeters */ - if (unit == 0x11) { /* If centimeters */ - unit_exponent += 1; - } else if (unit == 0x13) { /* If inches */ - prev = physical_extents; - physical_extents *= 254; - if (physical_extents < prev) - return 0; - unit_exponent -= 1; - } else { - return 0; - } - - /* Apply negative unit exponent */ - for (; unit_exponent < 0; unit_exponent++) { - prev = logical_extents; - logical_extents *= 10; - if (logical_extents < prev) - return 0; - } - /* Apply positive unit exponent */ - for (; unit_exponent > 0; unit_exponent--) { - prev = physical_extents; - physical_extents *= 10; - if (physical_extents < prev) - return 0; - } - - /* Calculate resolution */ - return logical_extents / physical_extents; + struct hid_field field = { + .logical_maximum = logical_extents, + .physical_maximum = physical_extents, + .unit = unit, + .unit_exponent = exponent, + }; + + return hidinput_calc_abs_res(&field, ABS_X); } static void wacom_feature_mapping(struct hid_device *hdev, -- cgit v0.10.2 From 80befa93817b661193ba6423dfa9b69ffacd7e53 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:05:19 -0700 Subject: Input: wacom - remove field pktlen declaration in the list of devices pktlen is now overwritten by the driver directly by reading the hid report descriptor. There is no need to declare it statically. We also move down the position of the field in the struct so that we can keep the current declaration of Wacom devices. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 1c95ce7..15b0132 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2012,418 +2012,396 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, } static const struct wacom_features wacom_features_0x00 = - { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, - 0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; + { "Wacom Penpartner", 5040, 3780, 255, 0, + PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x10 = - { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire", 10206, 7422, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x11 = - { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x12 = - { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire2 5x7", 13918, 10206, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x13 = - { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire3", 10208, 7424, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x14 = - { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire3 6x8", 16704, 12064, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x15 = - { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, - 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire4 4x5", 10208, 7424, 511, 63, + WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x16 = - { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, - 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Graphire4 6x8", 16704, 12064, 511, 63, + WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x17 = - { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, - 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom BambooFun 4x5", 14760, 9225, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x18 = - { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, - 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom BambooFun 6x8", 21648, 13530, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x19 = - { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, - 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; + { "Wacom Bamboo1 Medium", 16704, 12064, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x60 = - { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, - 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; + { "Wacom Volito", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x61 = - { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, - 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; + { "Wacom PenStation2", 3250, 2320, 255, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x62 = - { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, - 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; + { "Wacom Volito2 4x5", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x63 = - { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, - 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; + { "Wacom Volito2 2x3", 3248, 2320, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x64 = - { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, - 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; + { "Wacom PenPartner2", 3250, 2320, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x65 = - { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, - 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo", 14760, 9225, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x69 = - { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, - 63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; + { "Wacom Bamboo1", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x6A = - { "Wacom Bamboo1 4x6", WACOM_PKGLEN_GRAPHIRE, 14760, 9225, 1023, - 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63, + GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x6B = - { "Wacom Bamboo1 5x8", WACOM_PKGLEN_GRAPHIRE, 21648, 13530, 1023, - 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63, + GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x20 = - { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos 4x5", 12700, 10600, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x21 = - { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x22 = - { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos 9x12", 30480, 24060, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x23 = - { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos 12x12", 30480, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x24 = - { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos 12x18", 45720, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x30 = - { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL400", 5408, 4056, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x31 = - { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL500", 6144, 4608, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x32 = - { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL600", 6126, 4604, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x33 = - { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL600SX", 6260, 5016, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x34 = - { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL550", 6144, 4608, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x35 = - { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL800", 7220, 5780, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x37 = - { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL700", 6758, 5406, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x38 = - { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom PL510", 6282, 4762, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x39 = - { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom DTU710", 34080, 27660, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC4 = - { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom DTF521", 6282, 4762, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC0 = - { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom DTF720", 6858, 5506, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC2 = - { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, - 0, PL, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom DTF720a", 6858, 5506, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x03 = - { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, - 0, PTU, WACOM_PL_RES, WACOM_PL_RES }; + { "Wacom Cintiq Partner", 20480, 15360, 511, 0, + PTU, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x41 = - { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 4x5", 12700, 10600, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x42 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x43 = - { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 9x12", 30480, 24060, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x44 = - { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 12x12", 30480, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x45 = - { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 12x18", 45720, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xB0 = - { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, - 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 4x5", 25400, 20320, 1023, 63, + INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB1 = - { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, - 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 6x8", 40640, 30480, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB2 = - { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, - 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 9x12", 60960, 45720, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB3 = - { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, - 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 12x12", 60960, 60960, 1023, 63, + INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB4 = - { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, - 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 12x19", 97536, 60960, 1023, 63, + INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB5 = - { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, - 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 6x11", 54204, 31750, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB7 = - { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, - 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos3 4x6", 31496, 19685, 1023, 63, + INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB8 = - { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, - 63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos4 4x6", 31496, 19685, 2047, 63, + INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB9 = - { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, - 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos4 6x9", 44704, 27940, 2047, 63, + INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBA = - { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, - 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos4 8x13", 65024, 40640, 2047, 63, + INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBB = - { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, - 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos4 12x19", 97536, 60960, 2047, 63, + INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBC = - { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40640, 25400, 2047, - 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, + INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x26 = - { "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, - 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + { "Wacom Intuos5 touch S", 31496, 19685, 2047, 63, + INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x27 = - { "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, - 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + { "Wacom Intuos5 touch M", 44704, 27940, 2047, 63, + INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x28 = - { "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, - 63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16 }; + { "Wacom Intuos5 touch L", 65024, 40640, 2047, 63, + INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x29 = - { "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, - 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos5 S", 31496, 19685, 2047, 63, + INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x2A = - { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, - 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Intuos5 M", 44704, 27940, 2047, 63, + INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x314 = - { "Wacom Intuos Pro S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, - 63, INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16, + { "Wacom Intuos Pro S", 31496, 19685, 2047, 63, + INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x315 = - { "Wacom Intuos Pro M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, - 63, INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16, + { "Wacom Intuos Pro M", 44704, 27940, 2047, 63, + INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x317 = - { "Wacom Intuos Pro L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, - 63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, - .touch_max = 16, + { "Wacom Intuos Pro L", 65024, 40640, 2047, 63, + INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xF4 = - { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104280, 65400, 2047, - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; + { "Wacom Cintiq 24HD", 104280, 65400, 2047, 63, + WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; static const struct wacom_features wacom_features_0xF8 = - { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104280, 65400, 2047, /* Pen */ - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + { "Wacom Cintiq 24HD touch", 104280, 65400, 2047, 63, /* Pen */ + WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x3F = - { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, - 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Cintiq 21UX", 87200, 65600, 1023, 63, + CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC5 = - { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, - 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63, + WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC6 = - { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, - 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Cintiq 12WX", 53020, 33440, 1023, 63, + WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x304 = - { "Wacom Cintiq 13HD", WACOM_PKGLEN_INTUOS, 59352, 33648, 1023, - 63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; + { "Wacom Cintiq 13HD", 59352, 33648, 1023, 63, + WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; static const struct wacom_features wacom_features_0xC7 = - { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, - 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom DTU1931", 37832, 30305, 511, 0, + PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xCE = - { "Wacom DTU2231", WACOM_PKGLEN_GRAPHIRE, 47864, 27011, 511, - 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + { "Wacom DTU2231", 47864, 27011, 511, 0, + DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE }; static const struct wacom_features wacom_features_0xF0 = - { "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511, - 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom DTU1631", 34623, 19553, 511, 0, + DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xFB = - { "Wacom DTU1031", WACOM_PKGLEN_DTUS, 22096, 13960, 511, - 0, DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom DTU1031", 22096, 13960, 511, 0, + DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x57 = - { "Wacom DTK2241", WACOM_PKGLEN_INTUOS, 95640, 54060, 2047, - 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; + { "Wacom DTK2241", 95640, 54060, 2047, 63, + DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; static const struct wacom_features wacom_features_0x59 = /* Pen */ - { "Wacom DTH2242", WACOM_PKGLEN_INTUOS, 95640, 54060, 2047, - 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + { "Wacom DTH2242", 95640, 54060, 2047, 63, + DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D }; static const struct wacom_features wacom_features_0x5D = /* Touch */ { "Wacom DTH2242", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xCC = - { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87000, 65400, 2047, - 63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; + { "Wacom Cintiq 21UX2", 87000, 65400, 2047, 63, + WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; static const struct wacom_features wacom_features_0xFA = - { "Wacom Cintiq 22HD", WACOM_PKGLEN_INTUOS, 95640, 54060, 2047, - 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; + { "Wacom Cintiq 22HD", 95640, 54060, 2047, 63, + WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; static const struct wacom_features wacom_features_0x5B = - { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95640, 54060, 2047, - 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + { "Wacom Cintiq 22HDT", 95640, 54060, 2047, 63, + WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x90 = - { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 90", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x93 = - { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 93", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x97 = - { "Wacom ISDv4 97", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 511, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 97", 26202, 16325, 511, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9A = - { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 9A", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9F = - { "Wacom ISDv4 9F", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 9F", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE2 = - { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom ISDv4 E2", 26202, 16325, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xE3 = - { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom ISDv4 E3", 26202, 16325, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xE5 = - { "Wacom ISDv4 E5", WACOM_PKGLEN_MTOUCH, 26202, 16325, 255, - 0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 E5", 26202, 16325, 255, 0, + MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE6 = - { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom ISDv4 E6", 27760, 15694, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = - { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 EC", 25710, 14500, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xED = - { "Wacom ISDv4 ED", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 ED", 26202, 16325, 255, 0, + TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xEF = - { "Wacom ISDv4 EF", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 EF", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x100 = - { "Wacom ISDv4 100", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 100", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x101 = - { "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 101", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10D = - { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 10D", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10E = - { "Wacom ISDv4 10E", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 10E", 27760, 15694, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10F = - { "Wacom ISDv4 10F", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 10F", 27760, 15694, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x116 = - { "Wacom ISDv4 116", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, - 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 116", 26202, 16325, 255, 0, + TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = - { "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, - 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 4001", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4004 = - { "Wacom ISDv4 4004", WACOM_PKGLEN_MTTPC, 11060, 6220, 255, - 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 4004", 11060, 6220, 255, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x5000 = - { "Wacom ISDv4 5000", WACOM_PKGLEN_MTTPC, 27848, 15752, 1023, - 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 5000", 27848, 15752, 1023, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x5002 = - { "Wacom ISDv4 5002", WACOM_PKGLEN_MTTPC, 29576, 16724, 1023, - 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom ISDv4 5002", 29576, 16724, 1023, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = - { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, - 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x84 = - { "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0, - 0, WIRELESS, 0, 0, .touch_max = 16 }; + { "Wacom Wireless Receiver", 0, 0, 0, 0, + WIRELESS, 0, 0, .touch_max = 16 }; static const struct wacom_features wacom_features_0xD0 = - { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo 2FG", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD1 = - { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD2 = - { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo Craft", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD3 = - { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD4 = - { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo Pen", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD5 = - { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = - { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD7 = - { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD8 = - { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDA = - { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDB = - { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + { "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDD = - { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo Connect", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xDE = - { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16 }; + { "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0xDF = - { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16 }; + { "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x300 = - { "Wacom Bamboo One S", WACOM_PKGLEN_BBPEN, 14720, 9225, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo One S", 14720, 9225, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x301 = - { "Wacom Bamboo One M", WACOM_PKGLEN_BBPEN, 21648, 13530, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "Wacom Bamboo One M", 21648, 13530, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x302 = - { "Wacom Intuos PT S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, - 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16, + { "Wacom Intuos PT S", 15200, 9500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x303 = - { "Wacom Intuos PT M", WACOM_PKGLEN_BBPEN, 21600, 13500, 1023, - 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 16, + { "Wacom Intuos PT M", 21600, 13500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x30E = - { "Wacom Intuos S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023, - 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + { "Wacom Intuos S", 15200, 9500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x6004 = - { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, - 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + { "ISD-V4", 12800, 8000, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x0307 = - { "Wacom ISDv5 307", WACOM_PKGLEN_INTUOS, 59352, 33648, 2047, - 63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + { "Wacom ISDv5 307", 59352, 33648, 2047, 63, + CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; static const struct wacom_features wacom_features_0x0309 = { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 2a7612a..4c59247 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -114,7 +114,6 @@ enum { struct wacom_features { const char *name; - int pktlen; int x_max; int y_max; int pressure_max; @@ -137,6 +136,7 @@ struct wacom_features { unsigned touch_max; int oVid; int oPid; + int pktlen; bool check_for_hid_type; int hid_type; }; -- cgit v0.10.2 From a3e6f6543d1969f1931b4f68fdd1a230b620ead8 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:05:49 -0700 Subject: Input: wacom - keep wacom_ids ordered No Functional changes, just some reordering. Signed-off-by: Benjamin Tissoires Reviewed-by: Jason Gerecke Tested-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 15b0132..cd91521 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2399,11 +2399,11 @@ static const struct wacom_features wacom_features_0x30E = static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x0307 = +static const struct wacom_features wacom_features_0x307 = { "Wacom ISDv5 307", 59352, 33648, 2047, 63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; -static const struct wacom_features wacom_features_0x0309 = +static const struct wacom_features wacom_features_0x309 = { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; @@ -2418,6 +2418,7 @@ static const struct wacom_features wacom_features_0x0309 = const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x00) }, + { USB_DEVICE_WACOM(0x03) }, { USB_DEVICE_WACOM(0x10) }, { USB_DEVICE_WACOM(0x11) }, { USB_DEVICE_WACOM(0x12) }, @@ -2428,20 +2429,16 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x17) }, { USB_DEVICE_WACOM(0x18) }, { USB_DEVICE_WACOM(0x19) }, - { USB_DEVICE_WACOM(0x60) }, - { USB_DEVICE_WACOM(0x61) }, - { USB_DEVICE_WACOM(0x62) }, - { USB_DEVICE_WACOM(0x63) }, - { USB_DEVICE_WACOM(0x64) }, - { USB_DEVICE_WACOM(0x65) }, - { USB_DEVICE_WACOM(0x69) }, - { USB_DEVICE_WACOM(0x6A) }, - { USB_DEVICE_WACOM(0x6B) }, { USB_DEVICE_WACOM(0x20) }, { USB_DEVICE_WACOM(0x21) }, { USB_DEVICE_WACOM(0x22) }, { USB_DEVICE_WACOM(0x23) }, { USB_DEVICE_WACOM(0x24) }, + { USB_DEVICE_WACOM(0x26) }, + { USB_DEVICE_WACOM(0x27) }, + { USB_DEVICE_WACOM(0x28) }, + { USB_DEVICE_WACOM(0x29) }, + { USB_DEVICE_WACOM(0x2A) }, { USB_DEVICE_WACOM(0x30) }, { USB_DEVICE_WACOM(0x31) }, { USB_DEVICE_WACOM(0x32) }, @@ -2451,20 +2448,33 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x37) }, { USB_DEVICE_WACOM(0x38) }, { USB_DEVICE_WACOM(0x39) }, - { USB_DEVICE_WACOM(0xC4) }, - { USB_DEVICE_WACOM(0xC0) }, - { USB_DEVICE_WACOM(0xC2) }, - { USB_DEVICE_WACOM(0x03) }, + { USB_DEVICE_WACOM(0x3F) }, { USB_DEVICE_WACOM(0x41) }, { USB_DEVICE_WACOM(0x42) }, { USB_DEVICE_WACOM(0x43) }, { USB_DEVICE_WACOM(0x44) }, { USB_DEVICE_WACOM(0x45) }, + { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0x57) }, { USB_DEVICE_WACOM(0x59) }, - { USB_DEVICE_WACOM(0x5D) }, { USB_DEVICE_WACOM(0x5B) }, + { USB_DEVICE_WACOM(0x5D) }, { USB_DEVICE_WACOM(0x5E) }, + { USB_DEVICE_WACOM(0x60) }, + { USB_DEVICE_WACOM(0x61) }, + { USB_DEVICE_WACOM(0x62) }, + { USB_DEVICE_WACOM(0x63) }, + { USB_DEVICE_WACOM(0x64) }, + { USB_DEVICE_WACOM(0x65) }, + { USB_DEVICE_WACOM(0x69) }, + { USB_DEVICE_WACOM(0x6A) }, + { USB_DEVICE_WACOM(0x6B) }, + { USB_DEVICE_WACOM(0x84) }, + { USB_DEVICE_WACOM(0x90) }, + { USB_DEVICE_WACOM(0x93) }, + { USB_DEVICE_WACOM(0x97) }, + { USB_DEVICE_WACOM(0x9A) }, + { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xB0) }, { USB_DEVICE_WACOM(0xB1) }, { USB_DEVICE_WACOM(0xB2) }, @@ -2477,17 +2487,14 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xBA) }, { USB_DEVICE_WACOM(0xBB) }, { USB_DEVICE_WACOM(0xBC) }, - { USB_DEVICE_WACOM(0x26) }, - { USB_DEVICE_WACOM(0x27) }, - { USB_DEVICE_WACOM(0x28) }, - { USB_DEVICE_WACOM(0x29) }, - { USB_DEVICE_WACOM(0x2A) }, - { USB_DEVICE_WACOM(0x3F) }, + { USB_DEVICE_WACOM(0xC0) }, + { USB_DEVICE_WACOM(0xC2) }, + { USB_DEVICE_WACOM(0xC4) }, { USB_DEVICE_WACOM(0xC5) }, { USB_DEVICE_WACOM(0xC6) }, { USB_DEVICE_WACOM(0xC7) }, + { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0xCE) }, - { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0xD0) }, { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, @@ -2502,13 +2509,6 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xDD) }, { USB_DEVICE_WACOM(0xDE) }, { USB_DEVICE_WACOM(0xDF) }, - { USB_DEVICE_WACOM(0xF0) }, - { USB_DEVICE_WACOM(0xCC) }, - { USB_DEVICE_WACOM(0x90) }, - { USB_DEVICE_WACOM(0x93) }, - { USB_DEVICE_WACOM(0x97) }, - { USB_DEVICE_WACOM(0x9A) }, - { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, { USB_DEVICE_WACOM(0xE5) }, @@ -2516,6 +2516,12 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0xED) }, { USB_DEVICE_WACOM(0xEF) }, + { USB_DEVICE_WACOM(0xF0) }, + { USB_DEVICE_WACOM(0xF4) }, + { USB_DEVICE_WACOM(0xF6) }, + { USB_DEVICE_WACOM(0xF8) }, + { USB_DEVICE_WACOM(0xFA) }, + { USB_DEVICE_WACOM(0xFB) }, { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, @@ -2526,8 +2532,10 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x301) }, { USB_DEVICE_WACOM(0x302) }, { USB_DEVICE_WACOM(0x303) }, - { USB_DEVICE_WACOM(0x30E) }, { USB_DEVICE_WACOM(0x304) }, + { USB_DEVICE_WACOM(0x307) }, + { USB_DEVICE_WACOM(0x309) }, + { USB_DEVICE_WACOM(0x30E) }, { USB_DEVICE_WACOM(0x314) }, { USB_DEVICE_WACOM(0x315) }, { USB_DEVICE_WACOM(0x317) }, @@ -2535,15 +2543,6 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, { USB_DEVICE_WACOM(0x5002) }, - { USB_DEVICE_WACOM(0x47) }, - { USB_DEVICE_WACOM(0xF4) }, - { USB_DEVICE_WACOM(0xF8) }, - { USB_DEVICE_WACOM(0xF6) }, - { USB_DEVICE_WACOM(0xFA) }, - { USB_DEVICE_WACOM(0xFB) }, - { USB_DEVICE_WACOM(0x0307) }, - { USB_DEVICE_WACOM(0x0309) }, - { USB_DEVICE_LENOVO(0x6004) }, { } }; MODULE_DEVICE_TABLE(hid, wacom_ids); -- cgit v0.10.2 From 471d17148c8b4174ac5f5283a73316d12c4379bc Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:10:09 -0700 Subject: Input: wacom - move the USB (now hid) Wacom driver in drivers/hid wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 5e79c6a..64366f1 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -755,6 +755,19 @@ config HID_WACOM ---help--- Support for Wacom Graphire Bluetooth and Intuos4 WL tablets. +config HID_USB_WACOM + tristate "Wacom Intuos/Graphire tablet support (USB)" + depends on HID + select POWER_SUPPLY + select NEW_LEDS + select LEDS_CLASS + help + Say Y here if you want to use the USB version of the Wacom Intuos + or Graphire tablet. + + To compile this driver as a module, choose M here: the + module will be called wacom. + config HID_WIIMOTE tristate "Nintendo Wii / Wii U peripherals" depends on HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index a6fa6ba..55b69ac 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -116,6 +116,9 @@ obj-$(CONFIG_HID_XINMO) += hid-xinmo.o obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o obj-$(CONFIG_HID_WACOM) += hid-wacom.o + +wacom-objs := wacom_wac.o wacom_sys.o +obj-$(CONFIG_HID_USB_WACOM) += wacom.o obj-$(CONFIG_HID_WALTOP) += hid-waltop.o obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o obj-$(CONFIG_HID_SENSOR_HUB) += hid-sensor-hub.o diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h new file mode 100644 index 0000000..dd67b7d --- /dev/null +++ b/drivers/hid/wacom.h @@ -0,0 +1,138 @@ +/* + * drivers/input/tablet/wacom.h + * + * USB Wacom tablet support + * + * Copyright (c) 2000-2004 Vojtech Pavlik + * Copyright (c) 2000 Andreas Bach Aaen + * Copyright (c) 2000 Clifford Wolf + * Copyright (c) 2000 Sam Mosel + * Copyright (c) 2000 James E. Blair + * Copyright (c) 2000 Daniel Egger + * Copyright (c) 2001 Frederic Lepied + * Copyright (c) 2004 Panagiotis Issaris + * Copyright (c) 2002-2011 Ping Cheng + * + * ChangeLog: + * v0.1 (vp) - Initial release + * v0.2 (aba) - Support for all buttons / combinations + * v0.3 (vp) - Support for Intuos added + * v0.4 (sm) - Support for more Intuos models, menustrip + * relative mode, proximity. + * v0.5 (vp) - Big cleanup, nifty features removed, + * they belong in userspace + * v1.8 (vp) - Submit URB only when operating, moved to CVS, + * use input_report_key instead of report_btn and + * other cleanups + * v1.11 (vp) - Add URB ->dev setting for new kernels + * v1.11 (jb) - Add support for the 4D Mouse & Lens + * v1.12 (de) - Add support for two more inking pen IDs + * v1.14 (vp) - Use new USB device id probing scheme. + * Fix Wacom Graphire mouse wheel + * v1.18 (vp) - Fix mouse wheel direction + * Make mouse relative + * v1.20 (fl) - Report tool id for Intuos devices + * - Multi tools support + * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) + * - Add PL models support + * - Fix Wacom Graphire mouse wheel again + * v1.21 (vp) - Removed protocol descriptions + * - Added MISC_SERIAL for tool serial numbers + * (gb) - Identify version on module load. + * v1.21.1 (fl) - added Graphire2 support + * v1.21.2 (fl) - added Intuos2 support + * - added all the PL ids + * v1.21.3 (fl) - added another eraser id from Neil Okamoto + * - added smooth filter for Graphire from Peri Hankey + * - added PenPartner support from Olaf van Es + * - new tool ids from Ole Martin Bjoerndalen + * v1.29 (pc) - Add support for more tablets + * - Fix pressure reporting + * v1.30 (vp) - Merge 2.4 and 2.5 drivers + * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse + * - Cleanups here and there + * v1.30.1 (pi) - Added Graphire3 support + * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... + * v1.43 (pc) - Added support for Cintiq 21UX + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs + * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 + * - Minor data report fix + * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, + * - where wacom_sys.c deals with system specific code, + * - and wacom_wac.c deals with Wacom specific code + * - Support Intuos3 4x6 + * v1.47 (pc) - Added support for Bamboo + * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX + * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 + * v1.51 (pc) - Added support for Intuos4 + * v1.52 (pc) - Query Wacom data upon system resume + * - add defines for features->type + * - add new devices (0x9F, 0xE2, and 0XE3) + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_H +#define WACOM_H +#include +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.53" +#define DRIVER_AUTHOR "Vojtech Pavlik " +#define DRIVER_DESC "USB Wacom tablet driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_WACOM 0x056a +#define USB_VENDOR_ID_LENOVO 0x17ef + +struct wacom { + struct usb_device *usbdev; + struct usb_interface *intf; + struct wacom_wac wacom_wac; + struct hid_device *hdev; + struct mutex lock; + struct work_struct work; + struct wacom_led { + u8 select[2]; /* status led selector (0..3) */ + u8 llv; /* status led brightness no button (1..127) */ + u8 hlv; /* status led brightness button pressed (1..127) */ + u8 img_lum; /* OLED matrix display brightness */ + } led; + struct power_supply battery; +}; + +static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) +{ + struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); + schedule_work(&wacom->work); +} + +extern const struct hid_device_id wacom_ids[]; + +void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); +void wacom_setup_device_quirks(struct wacom_features *features); +int wacom_setup_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac); +int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac); +#endif diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c new file mode 100644 index 0000000..06e304b --- /dev/null +++ b/drivers/hid/wacom_sys.c @@ -0,0 +1,1257 @@ +/* + * drivers/input/tablet/wacom_sys.c + * + * USB Wacom tablet support - system specific code + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "wacom_wac.h" +#include "wacom.h" +#include + +#define WAC_MSG_RETRIES 5 + +#define WAC_CMD_LED_CONTROL 0x20 +#define WAC_CMD_ICON_START 0x21 +#define WAC_CMD_ICON_XFER 0x23 +#define WAC_CMD_RETRIES 10 + +static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id, + void *buf, size_t size, unsigned int retries) +{ + int retval; + + do { + retval = hid_hw_raw_request(hdev, id, buf, size, type, + HID_REQ_GET_REPORT); + } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); + + return retval; +} + +static int wacom_set_report(struct hid_device *hdev, u8 type, u8 id, + void *buf, size_t size, unsigned int retries) +{ + int retval; + + do { + retval = hid_hw_raw_request(hdev, id, buf, size, type, + HID_REQ_SET_REPORT); + } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); + + return retval; +} + +static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + + if (size > WACOM_PKGLEN_MAX) + return 1; + + memcpy(wacom->wacom_wac.data, raw_data, size); + + wacom_wac_irq(&wacom->wacom_wac, size); + + return 0; +} + +static int wacom_open(struct input_dev *dev) +{ + struct wacom *wacom = input_get_drvdata(dev); + int retval; + + mutex_lock(&wacom->lock); + retval = hid_hw_open(wacom->hdev); + mutex_unlock(&wacom->lock); + + return retval; +} + +static void wacom_close(struct input_dev *dev) +{ + struct wacom *wacom = input_get_drvdata(dev); + + mutex_lock(&wacom->lock); + hid_hw_close(wacom->hdev); + mutex_unlock(&wacom->lock); +} + +/* + * Calculate the resolution of the X or Y axis using hidinput_calc_abs_res. + */ +static int wacom_calc_hid_res(int logical_extents, int physical_extents, + unsigned unit, int exponent) +{ + struct hid_field field = { + .logical_maximum = logical_extents, + .physical_maximum = physical_extents, + .unit = unit, + .unit_exponent = exponent, + }; + + return hidinput_calc_abs_res(&field, ABS_X); +} + +static void wacom_feature_mapping(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + + switch (usage->hid) { + case HID_DG_CONTACTMAX: + /* leave touch_max as is if predefined */ + if (!features->touch_max) + features->touch_max = field->value[0]; + break; + } +} + +/* + * Interface Descriptor of wacom devices can be incomplete and + * inconsistent so wacom_features table is used to store stylus + * device's packet lengths, various maximum values, and tablet + * resolution based on product ID's. + * + * For devices that contain 2 interfaces, wacom_features table is + * inaccurate for the touch interface. Since the Interface Descriptor + * for touch interfaces has pretty complete data, this function exists + * to query tablet for this missing information instead of hard coding in + * an additional table. + * + * A typical Interface Descriptor for a stylus will contain a + * boot mouse application collection that is not of interest and this + * function will ignore it. + * + * It also contains a digitizer application collection that also is not + * of interest since any information it contains would be duplicate + * of what is in wacom_features. Usually it defines a report of an array + * of bytes that could be used as max length of the stylus packet returned. + * If it happens to define a Digitizer-Stylus Physical Collection then + * the X and Y logical values contain valid data but it is ignored. + * + * A typical Interface Descriptor for a touch interface will contain a + * Digitizer-Finger Physical Collection which will define both logical + * X/Y maximum as well as the physical size of tablet. Since touch + * interfaces haven't supported pressure or distance, this is enough + * information to override invalid values in the wacom_features table. + * + * Intuos5 touch interface and 3rd gen Bamboo Touch do not contain useful + * data. We deal with them after returning from this function. + */ +static void wacom_usage_mapping(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + bool finger = (field->logical == HID_DG_FINGER) || + (field->physical == HID_DG_FINGER); + bool pen = (field->logical == HID_DG_STYLUS) || + (field->physical == HID_DG_STYLUS); + + /* + * Requiring Stylus Usage will ignore boot mouse + * X/Y values and some cases of invalid Digitizer X/Y + * values commonly reported. + */ + if (!pen && !finger) + return; + + if (finger && !features->touch_max) + /* touch device at least supports one touch point */ + features->touch_max = 1; + + switch (usage->hid) { + case HID_GD_X: + features->x_max = field->logical_maximum; + if (finger) { + features->device_type = BTN_TOOL_FINGER; + features->x_phy = field->physical_maximum; + if (features->type != BAMBOO_PT) { + features->unit = field->unit; + features->unitExpo = field->unit_exponent; + } + } else { + features->device_type = BTN_TOOL_PEN; + } + break; + case HID_GD_Y: + features->y_max = field->logical_maximum; + if (finger) { + features->y_phy = field->physical_maximum; + if (features->type != BAMBOO_PT) { + features->unit = field->unit; + features->unitExpo = field->unit_exponent; + } + } + break; + case HID_DG_TIPPRESSURE: + if (pen) + features->pressure_max = field->logical_maximum; + break; + } +} + +static void wacom_parse_hid(struct hid_device *hdev, + struct wacom_features *features) +{ + struct hid_report_enum *rep_enum; + struct hid_report *hreport; + int i, j; + + /* check features first */ + rep_enum = &hdev->report_enum[HID_FEATURE_REPORT]; + list_for_each_entry(hreport, &rep_enum->report_list, list) { + for (i = 0; i < hreport->maxfield; i++) { + /* Ignore if report count is out of bounds. */ + if (hreport->field[i]->report_count < 1) + continue; + + for (j = 0; j < hreport->field[i]->maxusage; j++) { + wacom_feature_mapping(hdev, hreport->field[i], + hreport->field[i]->usage + j); + } + } + } + + /* now check the input usages */ + rep_enum = &hdev->report_enum[HID_INPUT_REPORT]; + list_for_each_entry(hreport, &rep_enum->report_list, list) { + + if (!hreport->maxfield) + continue; + + for (i = 0; i < hreport->maxfield; i++) + for (j = 0; j < hreport->field[i]->maxusage; j++) + wacom_usage_mapping(hdev, hreport->field[i], + hreport->field[i]->usage + j); + } +} + +static int wacom_set_device_mode(struct hid_device *hdev, int report_id, + int length, int mode) +{ + unsigned char *rep_data; + int error = -ENOMEM, limit = 0; + + rep_data = kzalloc(length, GFP_KERNEL); + if (!rep_data) + return error; + + do { + rep_data[0] = report_id; + rep_data[1] = mode; + + error = wacom_set_report(hdev, HID_FEATURE_REPORT, + report_id, rep_data, length, 1); + if (error >= 0) + error = wacom_get_report(hdev, HID_FEATURE_REPORT, + report_id, rep_data, length, 1); + } while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES); + + kfree(rep_data); + + return error < 0 ? error : 0; +} + +/* + * Switch the tablet into its most-capable mode. Wacom tablets are + * typically configured to power-up in a mode which sends mouse-like + * reports to the OS. To get absolute position, pressure data, etc. + * from the tablet, it is necessary to switch the tablet out of this + * mode and into one which sends the full range of tablet data. + */ +static int wacom_query_tablet_data(struct hid_device *hdev, + struct wacom_features *features) +{ + if (features->device_type == BTN_TOOL_FINGER) { + if (features->type > TABLETPC) { + /* MT Tablet PC touch */ + return wacom_set_device_mode(hdev, 3, 4, 4); + } + else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) { + return wacom_set_device_mode(hdev, 18, 3, 2); + } + } else if (features->device_type == BTN_TOOL_PEN) { + if (features->type <= BAMBOO_PT && features->type != WIRELESS) { + return wacom_set_device_mode(hdev, 2, 2, 2); + } + } + + return 0; +} + +static void wacom_retrieve_hid_descriptor(struct hid_device *hdev, + struct wacom_features *features) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct usb_interface *intf = wacom->intf; + + /* default features */ + features->device_type = BTN_TOOL_PEN; + features->x_fuzz = 4; + features->y_fuzz = 4; + features->pressure_fuzz = 0; + features->distance_fuzz = 0; + + /* + * The wireless device HID is basic and layout conflicts with + * other tablets (monitor and touch interface can look like pen). + * Skip the query for this type and modify defaults based on + * interface number. + */ + if (features->type == WIRELESS) { + if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { + features->device_type = 0; + } else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) { + features->device_type = BTN_TOOL_FINGER; + features->pktlen = WACOM_PKGLEN_BBTOUCH3; + } + } + + /* only devices that support touch need to retrieve the info */ + if (features->type < BAMBOO_PT) + return; + + wacom_parse_hid(hdev, features); +} + +struct wacom_hdev_data { + struct list_head list; + struct kref kref; + struct hid_device *dev; + struct wacom_shared shared; +}; + +static LIST_HEAD(wacom_udev_list); +static DEFINE_MUTEX(wacom_udev_list_lock); + +static bool wacom_are_sibling(struct hid_device *hdev, + struct hid_device *sibling) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + int vid = features->oVid; + int pid = features->oPid; + int n1,n2; + + if (vid == 0 && pid == 0) { + vid = hdev->vendor; + pid = hdev->product; + } + + if (vid != sibling->vendor || pid != sibling->product) + return false; + + /* Compare the physical path. */ + n1 = strrchr(hdev->phys, '.') - hdev->phys; + n2 = strrchr(sibling->phys, '.') - sibling->phys; + if (n1 != n2 || n1 <= 0 || n2 <= 0) + return false; + + return !strncmp(hdev->phys, sibling->phys, n1); +} + +static struct wacom_hdev_data *wacom_get_hdev_data(struct hid_device *hdev) +{ + struct wacom_hdev_data *data; + + list_for_each_entry(data, &wacom_udev_list, list) { + if (wacom_are_sibling(hdev, data->dev)) { + kref_get(&data->kref); + return data; + } + } + + return NULL; +} + +static int wacom_add_shared_data(struct hid_device *hdev) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_wac *wacom_wac = &wacom->wacom_wac; + struct wacom_hdev_data *data; + int retval = 0; + + mutex_lock(&wacom_udev_list_lock); + + data = wacom_get_hdev_data(hdev); + if (!data) { + data = kzalloc(sizeof(struct wacom_hdev_data), GFP_KERNEL); + if (!data) { + retval = -ENOMEM; + goto out; + } + + kref_init(&data->kref); + data->dev = hdev; + list_add_tail(&data->list, &wacom_udev_list); + } + + wacom_wac->shared = &data->shared; + +out: + mutex_unlock(&wacom_udev_list_lock); + return retval; +} + +static void wacom_release_shared_data(struct kref *kref) +{ + struct wacom_hdev_data *data = + container_of(kref, struct wacom_hdev_data, kref); + + mutex_lock(&wacom_udev_list_lock); + list_del(&data->list); + mutex_unlock(&wacom_udev_list_lock); + + kfree(data); +} + +static void wacom_remove_shared_data(struct wacom_wac *wacom) +{ + struct wacom_hdev_data *data; + + if (wacom->shared) { + data = container_of(wacom->shared, struct wacom_hdev_data, shared); + kref_put(&data->kref, wacom_release_shared_data); + wacom->shared = NULL; + } +} + +static int wacom_led_control(struct wacom *wacom) +{ + unsigned char *buf; + int retval; + + buf = kzalloc(9, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (wacom->wacom_wac.features.type >= INTUOS5S && + wacom->wacom_wac.features.type <= INTUOSPL) { + /* + * Touch Ring and crop mark LED luminance may take on + * one of four values: + * 0 = Low; 1 = Medium; 2 = High; 3 = Off + */ + int ring_led = wacom->led.select[0] & 0x03; + int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03; + int crop_lum = 0; + + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led); + } + else { + int led = wacom->led.select[0] | 0x4; + + if (wacom->wacom_wac.features.type == WACOM_21UX2 || + wacom->wacom_wac.features.type == WACOM_24HD) + led |= (wacom->led.select[1] << 4) | 0x40; + + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = led; + buf[2] = wacom->led.llv; + buf[3] = wacom->led.hlv; + buf[4] = wacom->led.img_lum; + } + + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_LED_CONTROL, buf, 9, WAC_CMD_RETRIES); + kfree(buf); + + return retval; +} + +static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img) +{ + unsigned char *buf; + int i, retval; + + buf = kzalloc(259, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Send 'start' command */ + buf[0] = WAC_CMD_ICON_START; + buf[1] = 1; + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_ICON_START, buf, 2, WAC_CMD_RETRIES); + if (retval < 0) + goto out; + + buf[0] = WAC_CMD_ICON_XFER; + buf[1] = button_id & 0x07; + for (i = 0; i < 4; i++) { + buf[2] = i; + memcpy(buf + 3, img + i * 256, 256); + + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, + WAC_CMD_ICON_XFER, + buf, 259, WAC_CMD_RETRIES); + if (retval < 0) + break; + } + + /* Send 'stop' */ + buf[0] = WAC_CMD_ICON_START; + buf[1] = 0; + wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, WAC_CMD_ICON_START, + buf, 2, WAC_CMD_RETRIES); + +out: + kfree(buf); + return retval; +} + +static ssize_t wacom_led_select_store(struct device *dev, int set_id, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct wacom *wacom = hid_get_drvdata(hdev); + unsigned int id; + int err; + + err = kstrtouint(buf, 10, &id); + if (err) + return err; + + mutex_lock(&wacom->lock); + + wacom->led.select[set_id] = id & 0x3; + err = wacom_led_control(wacom); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_LED_SELECT_ATTR(SET_ID) \ +static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + return wacom_led_select_store(dev, SET_ID, buf, count); \ +} \ +static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ + struct wacom *wacom = hid_get_drvdata(hdev); \ + return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \ +} \ +static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \ + wacom_led##SET_ID##_select_show, \ + wacom_led##SET_ID##_select_store) + +DEVICE_LED_SELECT_ATTR(0); +DEVICE_LED_SELECT_ATTR(1); + +static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest, + const char *buf, size_t count) +{ + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + mutex_lock(&wacom->lock); + + *dest = value & 0x7f; + err = wacom_led_control(wacom); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_LUMINANCE_ATTR(name, field) \ +static ssize_t wacom_##name##_luminance_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ + struct wacom *wacom = hid_get_drvdata(hdev); \ + \ + return wacom_luminance_store(wacom, &wacom->led.field, \ + buf, count); \ +} \ +static DEVICE_ATTR(name##_luminance, S_IWUSR, \ + NULL, wacom_##name##_luminance_store) + +DEVICE_LUMINANCE_ATTR(status0, llv); +DEVICE_LUMINANCE_ATTR(status1, hlv); +DEVICE_LUMINANCE_ATTR(buttons, img_lum); + +static ssize_t wacom_button_image_store(struct device *dev, int button_id, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct wacom *wacom = hid_get_drvdata(hdev); + int err; + + if (count != 1024) + return -EINVAL; + + mutex_lock(&wacom->lock); + + err = wacom_led_putimage(wacom, button_id, buf); + + mutex_unlock(&wacom->lock); + + return err < 0 ? err : count; +} + +#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \ +static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + return wacom_button_image_store(dev, BUTTON_ID, buf, count); \ +} \ +static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR, \ + NULL, wacom_btnimg##BUTTON_ID##_store) + +DEVICE_BTNIMG_ATTR(0); +DEVICE_BTNIMG_ATTR(1); +DEVICE_BTNIMG_ATTR(2); +DEVICE_BTNIMG_ATTR(3); +DEVICE_BTNIMG_ATTR(4); +DEVICE_BTNIMG_ATTR(5); +DEVICE_BTNIMG_ATTR(6); +DEVICE_BTNIMG_ATTR(7); + +static struct attribute *cintiq_led_attrs[] = { + &dev_attr_status_led0_select.attr, + &dev_attr_status_led1_select.attr, + NULL +}; + +static struct attribute_group cintiq_led_attr_group = { + .name = "wacom_led", + .attrs = cintiq_led_attrs, +}; + +static struct attribute *intuos4_led_attrs[] = { + &dev_attr_status0_luminance.attr, + &dev_attr_status1_luminance.attr, + &dev_attr_status_led0_select.attr, + &dev_attr_buttons_luminance.attr, + &dev_attr_button0_rawimg.attr, + &dev_attr_button1_rawimg.attr, + &dev_attr_button2_rawimg.attr, + &dev_attr_button3_rawimg.attr, + &dev_attr_button4_rawimg.attr, + &dev_attr_button5_rawimg.attr, + &dev_attr_button6_rawimg.attr, + &dev_attr_button7_rawimg.attr, + NULL +}; + +static struct attribute_group intuos4_led_attr_group = { + .name = "wacom_led", + .attrs = intuos4_led_attrs, +}; + +static struct attribute *intuos5_led_attrs[] = { + &dev_attr_status0_luminance.attr, + &dev_attr_status_led0_select.attr, + NULL +}; + +static struct attribute_group intuos5_led_attr_group = { + .name = "wacom_led", + .attrs = intuos5_led_attrs, +}; + +static int wacom_initialize_leds(struct wacom *wacom) +{ + int error; + + /* Initialize default values */ + switch (wacom->wacom_wac.features.type) { + case INTUOS4S: + case INTUOS4: + case INTUOS4L: + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 10; + wacom->led.hlv = 20; + wacom->led.img_lum = 10; + error = sysfs_create_group(&wacom->hdev->dev.kobj, + &intuos4_led_attr_group); + break; + + case WACOM_24HD: + case WACOM_21UX2: + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 0; + wacom->led.hlv = 0; + wacom->led.img_lum = 0; + + error = sysfs_create_group(&wacom->hdev->dev.kobj, + &cintiq_led_attr_group); + break; + + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + case INTUOSPS: + case INTUOSPM: + case INTUOSPL: + if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) { + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 32; + wacom->led.hlv = 0; + wacom->led.img_lum = 0; + + error = sysfs_create_group(&wacom->hdev->dev.kobj, + &intuos5_led_attr_group); + } else + return 0; + break; + + default: + return 0; + } + + if (error) { + hid_err(wacom->hdev, + "cannot create sysfs group err: %d\n", error); + return error; + } + wacom_led_control(wacom); + + return 0; +} + +static void wacom_destroy_leds(struct wacom *wacom) +{ + switch (wacom->wacom_wac.features.type) { + case INTUOS4S: + case INTUOS4: + case INTUOS4L: + sysfs_remove_group(&wacom->hdev->dev.kobj, + &intuos4_led_attr_group); + break; + + case WACOM_24HD: + case WACOM_21UX2: + sysfs_remove_group(&wacom->hdev->dev.kobj, + &cintiq_led_attr_group); + break; + + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + case INTUOSPS: + case INTUOSPM: + case INTUOSPL: + if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) + sysfs_remove_group(&wacom->hdev->dev.kobj, + &intuos5_led_attr_group); + break; + } +} + +static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_CAPACITY +}; + +static int wacom_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wacom *wacom = container_of(psy, struct wacom, battery); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = + wacom->wacom_wac.battery_capacity * 100 / 31; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int wacom_initialize_battery(struct wacom *wacom) +{ + int error = 0; + + if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) { + wacom->battery.properties = wacom_battery_props; + wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); + wacom->battery.get_property = wacom_battery_get_property; + wacom->battery.name = "wacom_battery"; + wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; + wacom->battery.use_for_apm = 0; + + error = power_supply_register(&wacom->hdev->dev, + &wacom->battery); + + if (!error) + power_supply_powers(&wacom->battery, + &wacom->hdev->dev); + } + + return error; +} + +static void wacom_destroy_battery(struct wacom *wacom) +{ + if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR && + wacom->battery.dev) { + power_supply_unregister(&wacom->battery); + wacom->battery.dev = NULL; + } +} + +static struct input_dev *wacom_allocate_input(struct wacom *wacom) +{ + struct input_dev *input_dev; + struct hid_device *hdev = wacom->hdev; + struct wacom_wac *wacom_wac = &(wacom->wacom_wac); + + input_dev = input_allocate_device(); + if (!input_dev) + return NULL; + + input_dev->name = wacom_wac->name; + input_dev->phys = hdev->phys; + input_dev->dev.parent = &hdev->dev; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + input_dev->uniq = hdev->uniq; + input_dev->id.bustype = hdev->bus; + input_dev->id.vendor = hdev->vendor; + input_dev->id.product = hdev->product; + input_dev->id.version = hdev->version; + input_set_drvdata(input_dev, wacom); + + return input_dev; +} + +static void wacom_unregister_inputs(struct wacom *wacom) +{ + if (wacom->wacom_wac.input) + input_unregister_device(wacom->wacom_wac.input); + if (wacom->wacom_wac.pad_input) + input_unregister_device(wacom->wacom_wac.pad_input); + wacom->wacom_wac.input = NULL; + wacom->wacom_wac.pad_input = NULL; +} + +static int wacom_register_inputs(struct wacom *wacom) +{ + struct input_dev *input_dev, *pad_input_dev; + struct wacom_wac *wacom_wac = &(wacom->wacom_wac); + int error; + + input_dev = wacom_allocate_input(wacom); + pad_input_dev = wacom_allocate_input(wacom); + if (!input_dev || !pad_input_dev) { + error = -ENOMEM; + goto fail1; + } + + wacom_wac->input = input_dev; + wacom_wac->pad_input = pad_input_dev; + wacom_wac->pad_input->name = wacom_wac->pad_name; + + error = wacom_setup_input_capabilities(input_dev, wacom_wac); + if (error) + goto fail2; + + error = input_register_device(input_dev); + if (error) + goto fail2; + + error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac); + if (error) { + /* no pad in use on this interface */ + input_free_device(pad_input_dev); + wacom_wac->pad_input = NULL; + pad_input_dev = NULL; + } else { + error = input_register_device(pad_input_dev); + if (error) + goto fail3; + } + + return 0; + +fail3: + input_unregister_device(input_dev); + input_dev = NULL; +fail2: + wacom_wac->input = NULL; + wacom_wac->pad_input = NULL; +fail1: + if (input_dev) + input_free_device(input_dev); + if (pad_input_dev) + input_free_device(pad_input_dev); + return error; +} + +static void wacom_wireless_work(struct work_struct *work) +{ + struct wacom *wacom = container_of(work, struct wacom, work); + struct usb_device *usbdev = wacom->usbdev; + struct wacom_wac *wacom_wac = &wacom->wacom_wac; + struct hid_device *hdev1, *hdev2; + struct wacom *wacom1, *wacom2; + struct wacom_wac *wacom_wac1, *wacom_wac2; + int error; + + /* + * Regardless if this is a disconnect or a new tablet, + * remove any existing input and battery devices. + */ + + wacom_destroy_battery(wacom); + + /* Stylus interface */ + hdev1 = usb_get_intfdata(usbdev->config->interface[1]); + wacom1 = hid_get_drvdata(hdev1); + wacom_wac1 = &(wacom1->wacom_wac); + wacom_unregister_inputs(wacom1); + + /* Touch interface */ + hdev2 = usb_get_intfdata(usbdev->config->interface[2]); + wacom2 = hid_get_drvdata(hdev2); + wacom_wac2 = &(wacom2->wacom_wac); + wacom_unregister_inputs(wacom2); + + if (wacom_wac->pid == 0) { + hid_info(wacom->hdev, "wireless tablet disconnected\n"); + } else { + const struct hid_device_id *id = wacom_ids; + + hid_info(wacom->hdev, "wireless tablet connected with PID %x\n", + wacom_wac->pid); + + while (id->bus) { + if (id->vendor == USB_VENDOR_ID_WACOM && + id->product == wacom_wac->pid) + break; + id++; + } + + if (!id->bus) { + hid_info(wacom->hdev, "ignoring unknown PID.\n"); + return; + } + + /* Stylus interface */ + wacom_wac1->features = + *((struct wacom_features *)id->driver_data); + wacom_wac1->features.device_type = BTN_TOOL_PEN; + snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen", + wacom_wac1->features.name); + snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad", + wacom_wac1->features.name); + wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max; + wacom_wac1->shared->type = wacom_wac1->features.type; + error = wacom_register_inputs(wacom1); + if (error) + goto fail; + + /* Touch interface */ + if (wacom_wac1->features.touch_max || + wacom_wac1->features.type == INTUOSHT) { + wacom_wac2->features = + *((struct wacom_features *)id->driver_data); + wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; + wacom_wac2->features.device_type = BTN_TOOL_FINGER; + wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096; + if (wacom_wac2->features.touch_max) + snprintf(wacom_wac2->name, WACOM_NAME_MAX, + "%s (WL) Finger",wacom_wac2->features.name); + else + snprintf(wacom_wac2->name, WACOM_NAME_MAX, + "%s (WL) Pad",wacom_wac2->features.name); + snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX, + "%s (WL) Pad", wacom_wac2->features.name); + error = wacom_register_inputs(wacom2); + if (error) + goto fail; + + if (wacom_wac1->features.type == INTUOSHT && + wacom_wac1->features.touch_max) + wacom_wac->shared->touch_input = wacom_wac2->input; + } + + error = wacom_initialize_battery(wacom); + if (error) + goto fail; + } + + return; + +fail: + wacom_unregister_inputs(wacom1); + wacom_unregister_inputs(wacom2); + return; +} + +/* + * Not all devices report physical dimensions from HID. + * Compute the default from hardcoded logical dimension + * and resolution before driver overwrites them. + */ +static void wacom_set_default_phy(struct wacom_features *features) +{ + if (features->x_resolution) { + features->x_phy = (features->x_max * 100) / + features->x_resolution; + features->y_phy = (features->y_max * 100) / + features->y_resolution; + } +} + +static void wacom_calculate_res(struct wacom_features *features) +{ + features->x_resolution = wacom_calc_hid_res(features->x_max, + features->x_phy, + features->unit, + features->unitExpo); + features->y_resolution = wacom_calc_hid_res(features->y_max, + features->y_phy, + features->unit, + features->unitExpo); +} + +static int wacom_hid_report_len(struct hid_report *report) +{ + /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ + return ((report->size - 1) >> 3) + 1 + (report->id > 0); +} + +static size_t wacom_compute_pktlen(struct hid_device *hdev) +{ + struct hid_report_enum *report_enum; + struct hid_report *report; + size_t size = 0; + + report_enum = hdev->report_enum + HID_INPUT_REPORT; + + list_for_each_entry(report, &report_enum->report_list, list) { + size_t report_size = wacom_hid_report_len(report); + if (report_size > size) + size = report_size; + } + + return size; +} + +static int wacom_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom *wacom; + struct wacom_wac *wacom_wac; + struct wacom_features *features; + int error; + + if (!id->driver_data) + return -EINVAL; + + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + if (!wacom) + return -ENOMEM; + + hid_set_drvdata(hdev, wacom); + wacom->hdev = hdev; + + /* ask for the report descriptor to be loaded by HID */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "parse failed\n"); + goto fail1; + } + + wacom_wac = &wacom->wacom_wac; + wacom_wac->features = *((struct wacom_features *)id->driver_data); + features = &wacom_wac->features; + features->pktlen = wacom_compute_pktlen(hdev); + if (features->pktlen > WACOM_PKGLEN_MAX) { + error = -EINVAL; + goto fail1; + } + + if (features->check_for_hid_type && features->hid_type != hdev->type) { + error = -ENODEV; + goto fail1; + } + + wacom->usbdev = dev; + wacom->intf = intf; + mutex_init(&wacom->lock); + INIT_WORK(&wacom->work, wacom_wireless_work); + + /* set the default size in case we do not get them from hid */ + wacom_set_default_phy(features); + + /* Retrieve the physical and logical size for touch devices */ + wacom_retrieve_hid_descriptor(hdev, features); + + /* + * Intuos5 has no useful data about its touch interface in its + * HID descriptor. If this is the touch interface (PacketSize + * of WACOM_PKGLEN_BBTOUCH3), override the table values. + */ + if (features->type >= INTUOS5S && features->type <= INTUOSHT) { + if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { + features->device_type = BTN_TOOL_FINGER; + + features->x_max = 4096; + features->y_max = 4096; + } else { + features->device_type = BTN_TOOL_PEN; + } + } + + /* + * Same thing for Bamboo 3rd gen. + */ + if ((features->type == BAMBOO_PT) && + (features->pktlen == WACOM_PKGLEN_BBTOUCH3) && + (features->device_type == BTN_TOOL_PEN)) { + features->device_type = BTN_TOOL_FINGER; + + features->x_max = 4096; + features->y_max = 4096; + } + + wacom_setup_device_quirks(features); + + /* set unit to "100th of a mm" for devices not reported by HID */ + if (!features->unit) { + features->unit = 0x11; + features->unitExpo = -3; + } + wacom_calculate_res(features); + + strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); + snprintf(wacom_wac->pad_name, sizeof(wacom_wac->pad_name), + "%s Pad", features->name); + + if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { + /* Append the device type to the name */ + if (features->device_type != BTN_TOOL_FINGER) + strlcat(wacom_wac->name, " Pen", WACOM_NAME_MAX); + else if (features->touch_max) + strlcat(wacom_wac->name, " Finger", WACOM_NAME_MAX); + else + strlcat(wacom_wac->name, " Pad", WACOM_NAME_MAX); + + error = wacom_add_shared_data(hdev); + if (error) + goto fail1; + } + + error = wacom_initialize_leds(wacom); + if (error) + goto fail2; + + if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { + error = wacom_register_inputs(wacom); + if (error) + goto fail3; + } + + /* Note that if query fails it is not a hard failure */ + wacom_query_tablet_data(hdev, features); + + /* Regular HID work starts now */ + error = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (error) { + hid_err(hdev, "hw start failed\n"); + goto fail4; + } + + if (features->quirks & WACOM_QUIRK_MONITOR) + error = hid_hw_open(hdev); + + if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) { + if (wacom_wac->features.device_type == BTN_TOOL_FINGER) + wacom_wac->shared->touch_input = wacom_wac->input; + } + + return 0; + + fail4: wacom_unregister_inputs(wacom); + fail3: wacom_destroy_leds(wacom); + fail2: wacom_remove_shared_data(wacom_wac); + fail1: kfree(wacom); + hid_set_drvdata(hdev, NULL); + return error; +} + +static void wacom_remove(struct hid_device *hdev) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + + hid_hw_stop(hdev); + + cancel_work_sync(&wacom->work); + wacom_unregister_inputs(wacom); + wacom_destroy_battery(wacom); + wacom_destroy_leds(wacom); + wacom_remove_shared_data(&wacom->wacom_wac); + + hid_set_drvdata(hdev, NULL); + kfree(wacom); +} + +static int wacom_resume(struct hid_device *hdev) +{ + struct wacom *wacom = hid_get_drvdata(hdev); + struct wacom_features *features = &wacom->wacom_wac.features; + + mutex_lock(&wacom->lock); + + /* switch to wacom mode first */ + wacom_query_tablet_data(hdev, features); + wacom_led_control(wacom); + + mutex_unlock(&wacom->lock); + + return 0; +} + +static int wacom_reset_resume(struct hid_device *hdev) +{ + return wacom_resume(hdev); +} + +static struct hid_driver wacom_driver = { + .name = "wacom", + .id_table = wacom_ids, + .probe = wacom_probe, + .remove = wacom_remove, +#ifdef CONFIG_PM + .resume = wacom_resume, + .reset_resume = wacom_reset_resume, +#endif + .raw_event = wacom_raw_event, +}; +module_hid_driver(wacom_driver); diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c new file mode 100644 index 0000000..cd91521 --- /dev/null +++ b/drivers/hid/wacom_wac.c @@ -0,0 +1,2548 @@ +/* + * drivers/input/tablet/wacom_wac.c + * + * USB Wacom tablet support - Wacom specific code + * + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "wacom_wac.h" +#include "wacom.h" +#include +#include + +/* resolution for penabled devices */ +#define WACOM_PL_RES 20 +#define WACOM_PENPRTN_RES 40 +#define WACOM_VOLITO_RES 50 +#define WACOM_GRAPHIRE_RES 80 +#define WACOM_INTUOS_RES 100 +#define WACOM_INTUOS3_RES 200 + +/* Scale factor relating reported contact size to logical contact area. + * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo + */ +#define WACOM_CONTACT_AREA_SCALE 2607 + +static int wacom_penpartner_irq(struct wacom_wac *wacom) +{ + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + + switch (data[0]) { + case 1: + if (data[5] & 0x80) { + wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; + input_report_key(input, wacom->tool[0], 1); + input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ + input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); + input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); + input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); + input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127)); + input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); + } else { + input_report_key(input, wacom->tool[0], 0); + input_report_abs(input, ABS_MISC, 0); /* report tool id */ + input_report_abs(input, ABS_PRESSURE, -1); + input_report_key(input, BTN_TOUCH, 0); + } + break; + + case 2: + input_report_key(input, BTN_TOOL_PEN, 1); + input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ + input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); + input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); + input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); + input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); + input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); + break; + + default: + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); + return 0; + } + + return 1; +} + +static int wacom_pl_irq(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + int prox, pressure; + + if (data[0] != WACOM_REPORT_PENABLED) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); + return 0; + } + + prox = data[1] & 0x40; + + if (prox) { + wacom->id[0] = ERASER_DEVICE_ID; + pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); + if (features->pressure_max > 255) + pressure = (pressure << 1) | ((data[4] >> 6) & 1); + pressure += (features->pressure_max + 1) / 2; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (!wacom->tool[0]) { + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + } else { + /* was entered with stylus2 pressed */ + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { + /* report out proximity for previous tool */ + input_report_key(input, wacom->tool[1], 0); + input_sync(input); + wacom->tool[1] = BTN_TOOL_PEN; + return 0; + } + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */ + input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ + input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); + input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); + input_report_abs(input, ABS_PRESSURE, pressure); + + input_report_key(input, BTN_TOUCH, data[4] & 0x08); + input_report_key(input, BTN_STYLUS, data[4] & 0x10); + /* Only allow the stylus2 button to be reported for the pen tool. */ + input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); + } else { + /* report proximity-out of a (valid) tool */ + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + } + input_report_key(input, wacom->tool[1], prox); + } + + wacom->tool[0] = prox; /* Save proximity state */ + return 1; +} + +static int wacom_ptu_irq(struct wacom_wac *wacom) +{ + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + + if (data[0] != WACOM_REPORT_PENABLED) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); + return 0; + } + + if (data[1] & 0x04) { + input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20); + input_report_key(input, BTN_TOUCH, data[1] & 0x08); + wacom->id[0] = ERASER_DEVICE_ID; + } else { + input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20); + input_report_key(input, BTN_TOUCH, data[1] & 0x01); + wacom->id[0] = STYLUS_DEVICE_ID; + } + input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); + input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6])); + input_report_key(input, BTN_STYLUS, data[1] & 0x02); + input_report_key(input, BTN_STYLUS2, data[1] & 0x10); + return 1; +} + +static int wacom_dtu_irq(struct wacom_wac *wacom) +{ + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + int prox = data[1] & 0x20; + + dev_dbg(input->dev.parent, + "%s: received report #%d", __func__, data[0]); + + if (prox) { + /* Going into proximity select tool */ + wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[0] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + else + wacom->id[0] = ERASER_DEVICE_ID; + } + input_report_key(input, BTN_STYLUS, data[1] & 0x02); + input_report_key(input, BTN_STYLUS2, data[1] & 0x10); + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); + input_report_key(input, BTN_TOUCH, data[1] & 0x05); + if (!prox) /* out-prox */ + wacom->id[0] = 0; + input_report_key(input, wacom->tool[0], prox); + input_report_abs(input, ABS_MISC, wacom->id[0]); + return 1; +} + +static int wacom_dtus_irq(struct wacom_wac *wacom) +{ + char *data = wacom->data; + struct input_dev *input = wacom->input; + unsigned short prox, pressure = 0; + + if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d", __func__, data[0]); + return 0; + } else if (data[0] == WACOM_REPORT_DTUSPAD) { + input = wacom->pad_input; + input_report_key(input, BTN_0, (data[1] & 0x01)); + input_report_key(input, BTN_1, (data[1] & 0x02)); + input_report_key(input, BTN_2, (data[1] & 0x04)); + input_report_key(input, BTN_3, (data[1] & 0x08)); + input_report_abs(input, ABS_MISC, + data[1] & 0x0f ? PAD_DEVICE_ID : 0); + return 1; + } else { + prox = data[1] & 0x80; + if (prox) { + switch ((data[1] >> 3) & 3) { + case 1: /* Rubber */ + wacom->tool[0] = BTN_TOOL_RUBBER; + wacom->id[0] = ERASER_DEVICE_ID; + break; + + case 2: /* Pen */ + wacom->tool[0] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + break; + } + } + + input_report_key(input, BTN_STYLUS, data[1] & 0x20); + input_report_key(input, BTN_STYLUS2, data[1] & 0x40); + input_report_abs(input, ABS_X, get_unaligned_be16(&data[3])); + input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5])); + pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff); + input_report_abs(input, ABS_PRESSURE, pressure); + input_report_key(input, BTN_TOUCH, pressure > 10); + + if (!prox) /* out-prox */ + wacom->id[0] = 0; + input_report_key(input, wacom->tool[0], prox); + input_report_abs(input, ABS_MISC, wacom->id[0]); + return 1; + } +} + +static int wacom_graphire_irq(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + struct input_dev *pad_input = wacom->pad_input; + int prox; + int rw = 0; + int retval = 0; + + if (data[0] != WACOM_REPORT_PENABLED) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); + goto exit; + } + + prox = data[1] & 0x80; + if (prox || wacom->id[0]) { + if (prox) { + switch ((data[1] >> 5) & 3) { + + case 0: /* Pen */ + wacom->tool[0] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + break; + + case 1: /* Rubber */ + wacom->tool[0] = BTN_TOOL_RUBBER; + wacom->id[0] = ERASER_DEVICE_ID; + break; + + case 2: /* Mouse with wheel */ + input_report_key(input, BTN_MIDDLE, data[1] & 0x04); + /* fall through */ + + case 3: /* Mouse without wheel */ + wacom->tool[0] = BTN_TOOL_MOUSE; + wacom->id[0] = CURSOR_DEVICE_ID; + break; + } + } + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); + if (wacom->tool[0] != BTN_TOOL_MOUSE) { + input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); + input_report_key(input, BTN_TOUCH, data[1] & 0x01); + input_report_key(input, BTN_STYLUS, data[1] & 0x02); + input_report_key(input, BTN_STYLUS2, data[1] & 0x04); + } else { + input_report_key(input, BTN_LEFT, data[1] & 0x01); + input_report_key(input, BTN_RIGHT, data[1] & 0x02); + if (features->type == WACOM_G4 || + features->type == WACOM_MO) { + input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); + rw = (data[7] & 0x04) - (data[7] & 0x03); + } else { + input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); + rw = -(signed char)data[6]; + } + input_report_rel(input, REL_WHEEL, rw); + } + + if (!prox) + wacom->id[0] = 0; + input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ + input_report_key(input, wacom->tool[0], prox); + input_sync(input); /* sync last event */ + } + + /* send pad data */ + switch (features->type) { + case WACOM_G4: + prox = data[7] & 0xf8; + if (prox || wacom->id[1]) { + wacom->id[1] = PAD_DEVICE_ID; + input_report_key(pad_input, BTN_BACK, (data[7] & 0x40)); + input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80)); + rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); + input_report_rel(pad_input, REL_WHEEL, rw); + if (!prox) + wacom->id[1] = 0; + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); + retval = 1; + } + break; + + case WACOM_MO: + prox = (data[7] & 0xf8) || data[8]; + if (prox || wacom->id[1]) { + wacom->id[1] = PAD_DEVICE_ID; + input_report_key(pad_input, BTN_BACK, (data[7] & 0x08)); + input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20)); + input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10)); + input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40)); + input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f)); + if (!prox) + wacom->id[1] = 0; + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); + retval = 1; + } + break; + } +exit: + return retval; +} + +static int wacom_intuos_inout(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + int idx = 0; + + /* tool number */ + if (features->type == INTUOS) + idx = data[1] & 0x01; + + /* Enter report */ + if ((data[1] & 0xfc) == 0xc0) { + if (features->quirks & WACOM_QUIRK_MULTI_INPUT) + wacom->shared->stylus_in_proximity = true; + + /* serial number of the tool */ + wacom->serial[idx] = ((data[3] & 0x0f) << 28) + + (data[4] << 20) + (data[5] << 12) + + (data[6] << 4) + (data[7] >> 4); + + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | + ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); + + switch (wacom->id[idx]) { + case 0x812: /* Inking pen */ + case 0x801: /* Intuos3 Inking pen */ + case 0x120802: /* Intuos4/5 Inking Pen */ + case 0x012: + wacom->tool[idx] = BTN_TOOL_PENCIL; + break; + + case 0x822: /* Pen */ + case 0x842: + case 0x852: + case 0x823: /* Intuos3 Grip Pen */ + case 0x813: /* Intuos3 Classic Pen */ + case 0x885: /* Intuos3 Marker Pen */ + case 0x802: /* Intuos4/5 13HD/24HD General Pen */ + case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */ + case 0x022: + case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ + case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ + case 0x160802: /* Cintiq 13HD Pro Pen */ + case 0x180802: /* DTH2242 Pen */ + case 0x100802: /* Intuos4/5 13HD/24HD General Pen */ + wacom->tool[idx] = BTN_TOOL_PEN; + break; + + case 0x832: /* Stroke pen */ + case 0x032: + wacom->tool[idx] = BTN_TOOL_BRUSH; + break; + + case 0x007: /* Mouse 4D and 2D */ + case 0x09c: + case 0x094: + case 0x017: /* Intuos3 2D Mouse */ + case 0x806: /* Intuos4 Mouse */ + wacom->tool[idx] = BTN_TOOL_MOUSE; + break; + + case 0x096: /* Lens cursor */ + case 0x097: /* Intuos3 Lens cursor */ + case 0x006: /* Intuos4 Lens cursor */ + wacom->tool[idx] = BTN_TOOL_LENS; + break; + + case 0x82a: /* Eraser */ + case 0x85a: + case 0x91a: + case 0xd1a: + case 0x0fa: + case 0x82b: /* Intuos3 Grip Pen Eraser */ + case 0x81b: /* Intuos3 Classic Pen Eraser */ + case 0x91b: /* Intuos3 Airbrush Eraser */ + case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */ + case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */ + case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */ + case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ + case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ + case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ + case 0x18080a: /* DTH2242 Eraser */ + case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */ + wacom->tool[idx] = BTN_TOOL_RUBBER; + break; + + case 0xd12: + case 0x912: + case 0x112: + case 0x913: /* Intuos3 Airbrush */ + case 0x902: /* Intuos4/5 13HD/24HD Airbrush */ + case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */ + wacom->tool[idx] = BTN_TOOL_AIRBRUSH; + break; + + default: /* Unknown tool */ + wacom->tool[idx] = BTN_TOOL_PEN; + break; + } + return 1; + } + + /* older I4 styli don't work with new Cintiqs */ + if (!((wacom->id[idx] >> 20) & 0x01) && + (features->type == WACOM_21UX2)) + return 1; + + /* Range Report */ + if ((data[1] & 0xfe) == 0x20) { + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max); + if (features->quirks & WACOM_QUIRK_MULTI_INPUT) + wacom->shared->stylus_in_proximity = true; + } + + /* Exit report */ + if ((data[1] & 0xfe) == 0x80) { + if (features->quirks & WACOM_QUIRK_MULTI_INPUT) + wacom->shared->stylus_in_proximity = false; + + /* + * Reset all states otherwise we lose the initial states + * when in-prox next time + */ + input_report_abs(input, ABS_X, 0); + input_report_abs(input, ABS_Y, 0); + input_report_abs(input, ABS_DISTANCE, 0); + input_report_abs(input, ABS_TILT_X, 0); + input_report_abs(input, ABS_TILT_Y, 0); + if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { + input_report_key(input, BTN_LEFT, 0); + input_report_key(input, BTN_MIDDLE, 0); + input_report_key(input, BTN_RIGHT, 0); + input_report_key(input, BTN_SIDE, 0); + input_report_key(input, BTN_EXTRA, 0); + input_report_abs(input, ABS_THROTTLE, 0); + input_report_abs(input, ABS_RZ, 0); + } else { + input_report_abs(input, ABS_PRESSURE, 0); + input_report_key(input, BTN_STYLUS, 0); + input_report_key(input, BTN_STYLUS2, 0); + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_WHEEL, 0); + if (features->type >= INTUOS3S) + input_report_abs(input, ABS_Z, 0); + } + input_report_key(input, wacom->tool[idx], 0); + input_report_abs(input, ABS_MISC, 0); /* reset tool id */ + input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + wacom->id[idx] = 0; + return 2; + } + return 0; +} + +static void wacom_intuos_general(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + unsigned int t; + + /* general pen packet */ + if ((data[1] & 0xb8) == 0xa0) { + t = (data[6] << 2) | ((data[7] >> 6) & 3); + if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) { + t = (t << 1) | (data[1] & 1); + } + input_report_abs(input, ABS_PRESSURE, t); + input_report_abs(input, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); + input_report_key(input, BTN_STYLUS, data[1] & 2); + input_report_key(input, BTN_STYLUS2, data[1] & 4); + input_report_key(input, BTN_TOUCH, t > 10); + } + + /* airbrush second packet */ + if ((data[1] & 0xbc) == 0xb4) { + input_report_abs(input, ABS_WHEEL, + (data[6] << 2) | ((data[7] >> 6) & 3)); + input_report_abs(input, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); + } +} + +static int wacom_intuos_irq(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + unsigned int t; + int idx = 0, result; + + if (data[0] != WACOM_REPORT_PENABLED && + data[0] != WACOM_REPORT_INTUOSREAD && + data[0] != WACOM_REPORT_INTUOSWRITE && + data[0] != WACOM_REPORT_INTUOSPAD && + data[0] != WACOM_REPORT_INTUOS5PAD) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); + return 0; + } + + /* tool number */ + if (features->type == INTUOS) + idx = data[1] & 0x01; + + /* pad packets. Works as a second tool and is always in prox */ + if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) { + input = wacom->pad_input; + if (features->type >= INTUOS4S && features->type <= INTUOS4L) { + input_report_key(input, BTN_0, (data[2] & 0x01)); + input_report_key(input, BTN_1, (data[3] & 0x01)); + input_report_key(input, BTN_2, (data[3] & 0x02)); + input_report_key(input, BTN_3, (data[3] & 0x04)); + input_report_key(input, BTN_4, (data[3] & 0x08)); + input_report_key(input, BTN_5, (data[3] & 0x10)); + input_report_key(input, BTN_6, (data[3] & 0x20)); + if (data[1] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + if (features->type != INTUOS4S) { + input_report_key(input, BTN_7, (data[3] & 0x40)); + input_report_key(input, BTN_8, (data[3] & 0x80)); + } + if (data[1] | (data[2] & 0x01) | data[3]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } else if (features->type == DTK) { + input_report_key(input, BTN_0, (data[6] & 0x01)); + input_report_key(input, BTN_1, (data[6] & 0x02)); + input_report_key(input, BTN_2, (data[6] & 0x04)); + input_report_key(input, BTN_3, (data[6] & 0x08)); + input_report_key(input, BTN_4, (data[6] & 0x10)); + input_report_key(input, BTN_5, (data[6] & 0x20)); + if (data[6] & 0x3f) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } else if (features->type == WACOM_13HD) { + input_report_key(input, BTN_0, (data[3] & 0x01)); + input_report_key(input, BTN_1, (data[4] & 0x01)); + input_report_key(input, BTN_2, (data[4] & 0x02)); + input_report_key(input, BTN_3, (data[4] & 0x04)); + input_report_key(input, BTN_4, (data[4] & 0x08)); + input_report_key(input, BTN_5, (data[4] & 0x10)); + input_report_key(input, BTN_6, (data[4] & 0x20)); + input_report_key(input, BTN_7, (data[4] & 0x40)); + input_report_key(input, BTN_8, (data[4] & 0x80)); + if ((data[3] & 0x01) | data[4]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } else if (features->type == WACOM_24HD) { + input_report_key(input, BTN_0, (data[6] & 0x01)); + input_report_key(input, BTN_1, (data[6] & 0x02)); + input_report_key(input, BTN_2, (data[6] & 0x04)); + input_report_key(input, BTN_3, (data[6] & 0x08)); + input_report_key(input, BTN_4, (data[6] & 0x10)); + input_report_key(input, BTN_5, (data[6] & 0x20)); + input_report_key(input, BTN_6, (data[6] & 0x40)); + input_report_key(input, BTN_7, (data[6] & 0x80)); + input_report_key(input, BTN_8, (data[8] & 0x01)); + input_report_key(input, BTN_9, (data[8] & 0x02)); + input_report_key(input, BTN_A, (data[8] & 0x04)); + input_report_key(input, BTN_B, (data[8] & 0x08)); + input_report_key(input, BTN_C, (data[8] & 0x10)); + input_report_key(input, BTN_X, (data[8] & 0x20)); + input_report_key(input, BTN_Y, (data[8] & 0x40)); + input_report_key(input, BTN_Z, (data[8] & 0x80)); + + /* + * Three "buttons" are available on the 24HD which are + * physically implemented as a touchstrip. Each button + * is approximately 3 bits wide with a 2 bit spacing. + * The raw touchstrip bits are stored at: + * ((data[3] & 0x1f) << 8) | data[4]) + */ + input_report_key(input, KEY_PROG1, data[4] & 0x07); + input_report_key(input, KEY_PROG2, data[4] & 0xE0); + input_report_key(input, KEY_PROG3, data[3] & 0x1C); + + if (data[1] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + + if (data[2] & 0x80) { + input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f)); + } else { + /* Out of proximity, clear second wheel value. */ + input_report_abs(input, ABS_THROTTLE, 0); + } + + if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } else if (features->type == CINTIQ_HYBRID) { + /* + * Do not send hardware buttons under Android. They + * are already sent to the system through GPIO (and + * have different meaning). + */ + input_report_key(input, BTN_1, (data[4] & 0x01)); + input_report_key(input, BTN_2, (data[4] & 0x02)); + input_report_key(input, BTN_3, (data[4] & 0x04)); + input_report_key(input, BTN_4, (data[4] & 0x08)); + + input_report_key(input, BTN_5, (data[4] & 0x10)); /* Right */ + input_report_key(input, BTN_6, (data[4] & 0x20)); /* Up */ + input_report_key(input, BTN_7, (data[4] & 0x40)); /* Left */ + input_report_key(input, BTN_8, (data[4] & 0x80)); /* Down */ + input_report_key(input, BTN_0, (data[3] & 0x01)); /* Center */ + } else if (features->type >= INTUOS5S && features->type <= INTUOSPL) { + int i; + + /* Touch ring mode switch has no capacitive sensor */ + input_report_key(input, BTN_0, (data[3] & 0x01)); + + /* + * ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in + * addition to the mechanical switch. Switch data is + * stored in data[4], capacitive data in data[5]. + */ + for (i = 0; i < 8; i++) + input_report_key(input, BTN_1 + i, data[4] & (1 << i)); + + if (data[2] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + + if (data[2] | (data[3] & 0x01) | data[4] | data[5]) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } else { + if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) { + input_report_key(input, BTN_0, (data[5] & 0x01)); + input_report_key(input, BTN_1, (data[6] & 0x01)); + input_report_key(input, BTN_2, (data[6] & 0x02)); + input_report_key(input, BTN_3, (data[6] & 0x04)); + input_report_key(input, BTN_4, (data[6] & 0x08)); + input_report_key(input, BTN_5, (data[6] & 0x10)); + input_report_key(input, BTN_6, (data[6] & 0x20)); + input_report_key(input, BTN_7, (data[6] & 0x40)); + input_report_key(input, BTN_8, (data[6] & 0x80)); + input_report_key(input, BTN_9, (data[7] & 0x01)); + input_report_key(input, BTN_A, (data[8] & 0x01)); + input_report_key(input, BTN_B, (data[8] & 0x02)); + input_report_key(input, BTN_C, (data[8] & 0x04)); + input_report_key(input, BTN_X, (data[8] & 0x08)); + input_report_key(input, BTN_Y, (data[8] & 0x10)); + input_report_key(input, BTN_Z, (data[8] & 0x20)); + input_report_key(input, BTN_BASE, (data[8] & 0x40)); + input_report_key(input, BTN_BASE2, (data[8] & 0x80)); + + if (features->type == WACOM_22HD) { + input_report_key(input, KEY_PROG1, data[9] & 0x01); + input_report_key(input, KEY_PROG2, data[9] & 0x02); + input_report_key(input, KEY_PROG3, data[9] & 0x04); + } + } else { + input_report_key(input, BTN_0, (data[5] & 0x01)); + input_report_key(input, BTN_1, (data[5] & 0x02)); + input_report_key(input, BTN_2, (data[5] & 0x04)); + input_report_key(input, BTN_3, (data[5] & 0x08)); + input_report_key(input, BTN_4, (data[6] & 0x01)); + input_report_key(input, BTN_5, (data[6] & 0x02)); + input_report_key(input, BTN_6, (data[6] & 0x04)); + input_report_key(input, BTN_7, (data[6] & 0x08)); + input_report_key(input, BTN_8, (data[5] & 0x10)); + input_report_key(input, BTN_9, (data[6] & 0x10)); + } + input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); + input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); + + if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | + data[2] | (data[3] & 0x1f) | data[4] | data[8] | + (data[7] & 0x01)) { + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_abs(input, ABS_MISC, 0); + } + } + return 1; + } + + /* process in/out prox events */ + result = wacom_intuos_inout(wacom); + if (result) + return result - 1; + + /* don't proceed if we don't know the ID */ + if (!wacom->id[idx]) + return 0; + + /* Only large Intuos support Lense Cursor */ + if (wacom->tool[idx] == BTN_TOOL_LENS && + (features->type == INTUOS3 || + features->type == INTUOS3S || + features->type == INTUOS4 || + features->type == INTUOS4S || + features->type == INTUOS5 || + features->type == INTUOS5S || + features->type == INTUOSPM || + features->type == INTUOSPS)) { + + return 0; + } + + /* Cintiq doesn't send data when RDY bit isn't set */ + if (features->type == CINTIQ && !(data[1] & 0x40)) + return 0; + + if (features->type >= INTUOS3S) { + input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); + input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); + input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); + } else { + input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2])); + input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4])); + input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); + } + + /* process general packets */ + wacom_intuos_general(wacom); + + /* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */ + if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) { + + if (data[1] & 0x02) { + /* Rotation packet */ + if (features->type >= INTUOS3S) { + /* I3 marker pen rotation */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : + ((t-1) / 2 + 450)) : (450 - t / 2) ; + input_report_abs(input, ABS_Z, t); + } else { + /* 4D mouse rotation packet */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + input_report_abs(input, ABS_RZ, (data[7] & 0x20) ? + ((t - 1) / 2) : -t / 2); + } + + } else if (!(data[1] & 0x10) && features->type < INTUOS3S) { + /* 4D mouse packet */ + input_report_key(input, BTN_LEFT, data[8] & 0x01); + input_report_key(input, BTN_MIDDLE, data[8] & 0x02); + input_report_key(input, BTN_RIGHT, data[8] & 0x04); + + input_report_key(input, BTN_SIDE, data[8] & 0x20); + input_report_key(input, BTN_EXTRA, data[8] & 0x10); + t = (data[6] << 2) | ((data[7] >> 6) & 3); + input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); + + } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { + /* I4 mouse */ + if (features->type >= INTUOS4S && features->type <= INTUOSPL) { + input_report_key(input, BTN_LEFT, data[6] & 0x01); + input_report_key(input, BTN_MIDDLE, data[6] & 0x02); + input_report_key(input, BTN_RIGHT, data[6] & 0x04); + input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7) + - ((data[7] & 0x40) >> 6)); + input_report_key(input, BTN_SIDE, data[6] & 0x08); + input_report_key(input, BTN_EXTRA, data[6] & 0x10); + + input_report_abs(input, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); + } else { + /* 2D mouse packet */ + input_report_key(input, BTN_LEFT, data[8] & 0x04); + input_report_key(input, BTN_MIDDLE, data[8] & 0x08); + input_report_key(input, BTN_RIGHT, data[8] & 0x10); + input_report_rel(input, REL_WHEEL, (data[8] & 0x01) + - ((data[8] & 0x02) >> 1)); + + /* I3 2D mouse side buttons */ + if (features->type >= INTUOS3S && features->type <= INTUOS3L) { + input_report_key(input, BTN_SIDE, data[8] & 0x40); + input_report_key(input, BTN_EXTRA, data[8] & 0x20); + } + } + } else if ((features->type < INTUOS3S || features->type == INTUOS3L || + features->type == INTUOS4L || features->type == INTUOS5L || + features->type == INTUOSPL) && + wacom->tool[idx] == BTN_TOOL_LENS) { + /* Lens cursor packets */ + input_report_key(input, BTN_LEFT, data[8] & 0x01); + input_report_key(input, BTN_MIDDLE, data[8] & 0x02); + input_report_key(input, BTN_RIGHT, data[8] & 0x04); + input_report_key(input, BTN_SIDE, data[8] & 0x10); + input_report_key(input, BTN_EXTRA, data[8] & 0x08); + } + } + + input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */ + input_report_key(input, wacom->tool[idx], 1); + input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 1; +} + +static int int_dist(int x1, int y1, int x2, int y2) +{ + int x = x2 - x1; + int y = y2 - y1; + + return int_sqrt(x*x + y*y); +} + +static int wacom_24hdt_irq(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int i; + int current_num_contacts = data[61]; + int contacts_to_send = 0; + + /* + * First packet resets the counter since only the first + * packet in series will have non-zero current_num_contacts. + */ + if (current_num_contacts) + wacom->num_contacts_left = current_num_contacts; + + /* There are at most 4 contacts per packet */ + contacts_to_send = min(4, wacom->num_contacts_left); + + for (i = 0; i < contacts_to_send; i++) { + int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1; + bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity; + int slot = input_mt_get_slot_by_key(input, data[offset + 1]); + + if (slot < 0) + continue; + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + + if (touch) { + int t_x = get_unaligned_le16(&data[offset + 2]); + int c_x = get_unaligned_le16(&data[offset + 4]); + int t_y = get_unaligned_le16(&data[offset + 6]); + int c_y = get_unaligned_le16(&data[offset + 8]); + int w = get_unaligned_le16(&data[offset + 10]); + int h = get_unaligned_le16(&data[offset + 12]); + + input_report_abs(input, ABS_MT_POSITION_X, t_x); + input_report_abs(input, ABS_MT_POSITION_Y, t_y); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h)); + input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y)); + input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h)); + input_report_abs(input, ABS_MT_ORIENTATION, w > h); + } + } + input_mt_report_pointer_emulation(input, true); + + wacom->num_contacts_left -= contacts_to_send; + if (wacom->num_contacts_left <= 0) + wacom->num_contacts_left = 0; + + return 1; +} + +static int wacom_mt_touch(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int i; + int current_num_contacts = data[2]; + int contacts_to_send = 0; + int x_offset = 0; + + /* MTTPC does not support Height and Width */ + if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B) + x_offset = -4; + + /* + * First packet resets the counter since only the first + * packet in series will have non-zero current_num_contacts. + */ + if (current_num_contacts) + wacom->num_contacts_left = current_num_contacts; + + /* There are at most 5 contacts per packet */ + contacts_to_send = min(5, wacom->num_contacts_left); + + for (i = 0; i < contacts_to_send; i++) { + int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3; + bool touch = data[offset] & 0x1; + int id = get_unaligned_le16(&data[offset + 1]); + int slot = input_mt_get_slot_by_key(input, id); + + if (slot < 0) + continue; + + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + int x = get_unaligned_le16(&data[offset + x_offset + 7]); + int y = get_unaligned_le16(&data[offset + x_offset + 9]); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + input_mt_report_pointer_emulation(input, true); + + wacom->num_contacts_left -= contacts_to_send; + if (wacom->num_contacts_left < 0) + wacom->num_contacts_left = 0; + + return 1; +} + +static int wacom_tpc_mt_touch(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int contact_with_no_pen_down_count = 0; + int i; + + for (i = 0; i < 2; i++) { + int p = data[1] & (1 << i); + bool touch = p && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff; + int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff; + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + contact_with_no_pen_down_count++; + } + } + input_mt_report_pointer_emulation(input, true); + + /* keep touch state for pen event */ + wacom->shared->touch_down = (contact_with_no_pen_down_count > 0); + + return 1; +} + +static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) +{ + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + bool prox; + int x = 0, y = 0; + + if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG) + return 0; + + if (!wacom->shared->stylus_in_proximity) { + if (len == WACOM_PKGLEN_TPC1FG) { + prox = data[0] & 0x01; + x = get_unaligned_le16(&data[1]); + y = get_unaligned_le16(&data[3]); + } else if (len == WACOM_PKGLEN_TPC1FG_B) { + prox = data[2] & 0x01; + x = get_unaligned_le16(&data[3]); + y = get_unaligned_le16(&data[5]); + } else { + prox = data[1] & 0x01; + x = le16_to_cpup((__le16 *)&data[2]); + y = le16_to_cpup((__le16 *)&data[4]); + } + } else + /* force touch out when pen is in prox */ + prox = 0; + + if (prox) { + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } + input_report_key(input, BTN_TOUCH, prox); + + /* keep touch state for pen events */ + wacom->shared->touch_down = prox; + + return 1; +} + +static int wacom_tpc_pen(struct wacom_wac *wacom) +{ + unsigned char *data = wacom->data; + struct input_dev *input = wacom->input; + bool prox = data[1] & 0x20; + + if (!wacom->shared->stylus_in_proximity) /* first in prox */ + /* Going into proximity select tool */ + wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + + /* keep pen state for touch events */ + wacom->shared->stylus_in_proximity = prox; + + /* send pen events only when touch is up or forced out */ + if (!wacom->shared->touch_down) { + input_report_key(input, BTN_STYLUS, data[1] & 0x02); + input_report_key(input, BTN_STYLUS2, data[1] & 0x10); + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]); + input_report_key(input, BTN_TOUCH, data[1] & 0x05); + input_report_key(input, wacom->tool[0], prox); + return 1; + } + + return 0; +} + +static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) +{ + unsigned char *data = wacom->data; + + dev_dbg(wacom->input->dev.parent, + "%s: received report #%d\n", __func__, data[0]); + + switch (len) { + case WACOM_PKGLEN_TPC1FG: + return wacom_tpc_single_touch(wacom, len); + + case WACOM_PKGLEN_TPC2FG: + return wacom_tpc_mt_touch(wacom); + + case WACOM_PKGLEN_PENABLED: + return wacom_tpc_pen(wacom); + + default: + switch (data[0]) { + case WACOM_REPORT_TPC1FG: + case WACOM_REPORT_TPCHID: + case WACOM_REPORT_TPCST: + case WACOM_REPORT_TPC1FGE: + return wacom_tpc_single_touch(wacom, len); + + case WACOM_REPORT_TPCMT: + case WACOM_REPORT_TPCMT2: + return wacom_mt_touch(wacom); + + case WACOM_REPORT_PENABLED: + return wacom_tpc_pen(wacom); + } + } + + return 0; +} + +static int wacom_bpt_touch(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + struct input_dev *input = wacom->input; + struct input_dev *pad_input = wacom->pad_input; + unsigned char *data = wacom->data; + int i; + + if (data[0] != 0x02) + return 0; + + for (i = 0; i < 2; i++) { + int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); + bool touch = data[offset + 3] & 0x80; + + /* + * Touch events need to be disabled while stylus is + * in proximity because user's hand is resting on touchpad + * and sending unwanted events. User expects tablet buttons + * to continue working though. + */ + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; + if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { + x <<= 5; + y <<= 5; + } + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + + input_mt_report_pointer_emulation(input, true); + + input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0); + input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0); + input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0); + input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0); + + return 1; +} + +static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) +{ + struct wacom_features *features = &wacom->features; + struct input_dev *input = wacom->input; + bool touch = data[1] & 0x80; + int slot = input_mt_get_slot_by_key(input, data[0]); + + if (slot < 0) + return; + + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + + if (touch) { + int x = (data[2] << 4) | (data[4] >> 4); + int y = (data[3] << 4) | (data[4] & 0x0f); + int width, height; + + if (features->type >= INTUOSPS && features->type <= INTUOSPL) { + width = data[5] * 100; + height = data[6] * 100; + } else { + /* + * "a" is a scaled-down area which we assume is + * roughly circular and which can be described as: + * a=(pi*r^2)/C. + */ + int a = data[5]; + int x_res = input_abs_get_res(input, ABS_X); + int y_res = input_abs_get_res(input, ABS_Y); + width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE); + height = width * y_res / x_res; + } + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, width); + input_report_abs(input, ABS_MT_TOUCH_MINOR, height); + } +} + +static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) +{ + struct input_dev *input = wacom->pad_input; + struct wacom_features *features = &wacom->features; + + if (features->type == INTUOSHT) { + input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0); + input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0); + } else { + input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); + input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); + } + input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); + input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); +} + +static int wacom_bpt3_touch(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int count = data[1] & 0x07; + int i; + + if (data[0] != 0x02) + return 0; + + /* data has up to 7 fixed sized 8-byte messages starting at data[2] */ + for (i = 0; i < count; i++) { + int offset = (8 * i) + 2; + int msg_id = data[offset]; + + if (msg_id >= 2 && msg_id <= 17) + wacom_bpt3_touch_msg(wacom, data + offset); + else if (msg_id == 128) + wacom_bpt3_button_msg(wacom, data + offset); + + } + input_mt_report_pointer_emulation(input, true); + + return 1; +} + +static int wacom_bpt_pen(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; + + if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB) + return 0; + + if (data[0] == WACOM_REPORT_USB) { + if (features->type == INTUOSHT && features->touch_max) { + input_report_switch(wacom->shared->touch_input, + SW_MUTE_DEVICE, data[8] & 0x40); + input_sync(wacom->shared->touch_input); + } + return 0; + } + + prox = (data[1] & 0x20) == 0x20; + + /* + * All reports shared between PEN and RUBBER tool must be + * forced to a known starting value (zero) when transitioning to + * out-of-prox. + * + * If not reset then, to userspace, it will look like lost events + * if new tool comes in-prox with same values as previous tool sent. + * + * Hardware does report zero in most out-of-prox cases but not all. + */ + if (prox) { + if (!wacom->shared->stylus_in_proximity) { + if (data[1] & 0x08) { + wacom->tool[0] = BTN_TOOL_RUBBER; + wacom->id[0] = ERASER_DEVICE_ID; + } else { + wacom->tool[0] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom->shared->stylus_in_proximity = true; + } + x = le16_to_cpup((__le16 *)&data[2]); + y = le16_to_cpup((__le16 *)&data[4]); + p = le16_to_cpup((__le16 *)&data[6]); + /* + * Convert distance from out prox to distance from tablet. + * distance will be greater than distance_max once + * touching and applying pressure; do not report negative + * distance. + */ + if (data[8] <= features->distance_max) + d = features->distance_max - data[8]; + + pen = data[1] & 0x01; + btn1 = data[1] & 0x02; + btn2 = data[1] & 0x04; + } + + input_report_key(input, BTN_TOUCH, pen); + input_report_key(input, BTN_STYLUS, btn1); + input_report_key(input, BTN_STYLUS2, btn2); + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, p); + input_report_abs(input, ABS_DISTANCE, d); + + if (!prox) { + wacom->id[0] = 0; + wacom->shared->stylus_in_proximity = false; + } + + input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ + input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ + + return 1; +} + +static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) +{ + if (len == WACOM_PKGLEN_BBTOUCH) + return wacom_bpt_touch(wacom); + else if (len == WACOM_PKGLEN_BBTOUCH3) + return wacom_bpt3_touch(wacom); + else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN) + return wacom_bpt_pen(wacom); + + return 0; +} + +static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) +{ + unsigned char *data = wacom->data; + int connected; + + if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL) + return 0; + + connected = data[1] & 0x01; + if (connected) { + int pid, battery; + + if ((wacom->shared->type == INTUOSHT) && + wacom->shared->touch_max) { + input_report_switch(wacom->shared->touch_input, + SW_MUTE_DEVICE, data[5] & 0x40); + input_sync(wacom->shared->touch_input); + } + + pid = get_unaligned_be16(&data[6]); + battery = data[5] & 0x3f; + if (wacom->pid != pid) { + wacom->pid = pid; + wacom_schedule_work(wacom); + } + wacom->battery_capacity = battery; + } else if (wacom->pid != 0) { + /* disconnected while previously connected */ + wacom->pid = 0; + wacom_schedule_work(wacom); + wacom->battery_capacity = 0; + } + + return 0; +} + +void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) +{ + bool sync; + + switch (wacom_wac->features.type) { + case PENPARTNER: + sync = wacom_penpartner_irq(wacom_wac); + break; + + case PL: + sync = wacom_pl_irq(wacom_wac); + break; + + case WACOM_G4: + case GRAPHIRE: + case WACOM_MO: + sync = wacom_graphire_irq(wacom_wac); + break; + + case PTU: + sync = wacom_ptu_irq(wacom_wac); + break; + + case DTU: + sync = wacom_dtu_irq(wacom_wac); + break; + + case DTUS: + sync = wacom_dtus_irq(wacom_wac); + break; + + case INTUOS: + case INTUOS3S: + case INTUOS3: + case INTUOS3L: + case INTUOS4S: + case INTUOS4: + case INTUOS4L: + case CINTIQ: + case WACOM_BEE: + case WACOM_13HD: + case WACOM_21UX2: + case WACOM_22HD: + case WACOM_24HD: + case DTK: + case CINTIQ_HYBRID: + sync = wacom_intuos_irq(wacom_wac); + break; + + case WACOM_24HDT: + sync = wacom_24hdt_irq(wacom_wac); + break; + + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + case INTUOSPS: + case INTUOSPM: + case INTUOSPL: + if (len == WACOM_PKGLEN_BBTOUCH3) + sync = wacom_bpt3_touch(wacom_wac); + else + sync = wacom_intuos_irq(wacom_wac); + break; + + case TABLETPC: + case TABLETPCE: + case TABLETPC2FG: + case MTSCREEN: + case MTTPC: + case MTTPC_B: + sync = wacom_tpc_irq(wacom_wac, len); + break; + + case BAMBOO_PT: + case INTUOSHT: + sync = wacom_bpt_irq(wacom_wac, len); + break; + + case WIRELESS: + sync = wacom_wireless_irq(wacom_wac, len); + break; + + default: + sync = false; + break; + } + + if (sync) { + input_sync(wacom_wac->input); + if (wacom_wac->pad_input) + input_sync(wacom_wac->pad_input); + } +} + +static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) +{ + struct input_dev *input_dev = wacom_wac->input; + + input_set_capability(input_dev, EV_MSC, MSC_SERIAL); + + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_BRUSH, input_dev->keybit); + __set_bit(BTN_TOOL_PENCIL, input_dev->keybit); + __set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_DISTANCE, + 0, wacom_wac->features.distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); +} + +static void wacom_setup_intuos(struct wacom_wac *wacom_wac) +{ + struct input_dev *input_dev = wacom_wac->input; + + input_set_capability(input_dev, EV_REL, REL_WHEEL); + + wacom_setup_cintiq(wacom_wac); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + __set_bit(BTN_SIDE, input_dev->keybit); + __set_bit(BTN_EXTRA, input_dev->keybit); + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + __set_bit(BTN_TOOL_LENS, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); +} + +void wacom_setup_device_quirks(struct wacom_features *features) +{ + + /* touch device found but size is not defined. use default */ + if (features->device_type == BTN_TOOL_FINGER && !features->x_max) { + features->x_max = 1023; + features->y_max = 1023; + } + + /* these device have multiple inputs */ + if (features->type >= WIRELESS || + (features->type >= INTUOS5S && features->type <= INTUOSHT) || + (features->oVid && features->oPid)) + features->quirks |= WACOM_QUIRK_MULTI_INPUT; + + /* quirk for bamboo touch with 2 low res touches */ + if (features->type == BAMBOO_PT && + features->pktlen == WACOM_PKGLEN_BBTOUCH) { + features->x_max <<= 5; + features->y_max <<= 5; + features->x_fuzz <<= 5; + features->y_fuzz <<= 5; + features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; + } + + if (features->type == WIRELESS) { + + /* monitor never has input and pen/touch have delayed create */ + features->quirks |= WACOM_QUIRK_NO_INPUT; + + /* must be monitor interface if no device_type set */ + if (!features->device_type) + features->quirks |= WACOM_QUIRK_MONITOR; + } +} + +static void wacom_abs_set_axis(struct input_dev *input_dev, + struct wacom_wac *wacom_wac) +{ + struct wacom_features *features = &wacom_wac->features; + + if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_X, features->x_min, + features->x_max, features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_Y, features->y_min, + features->y_max, features->y_fuzz, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, + features->pressure_max, features->pressure_fuzz, 0); + + /* penabled devices have fixed resolution for each model */ + input_abs_set_res(input_dev, ABS_X, features->x_resolution); + input_abs_set_res(input_dev, ABS_Y, features->y_resolution); + } else { + if (features->touch_max <= 2) { + input_set_abs_params(input_dev, ABS_X, 0, + features->x_max, features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + features->y_max, features->y_fuzz, 0); + input_abs_set_res(input_dev, ABS_X, + features->x_resolution); + input_abs_set_res(input_dev, ABS_Y, + features->y_resolution); + } + + if (features->touch_max > 1) { + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, + features->x_max, features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, + features->y_max, features->y_fuzz, 0); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + features->x_resolution); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + features->y_resolution); + } + } +} + +int wacom_setup_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac) +{ + struct wacom_features *features = &wacom_wac->features; + + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(ABS_MISC, input_dev->absbit); + + wacom_abs_set_axis(input_dev, wacom_wac); + + switch (features->type) { + case WACOM_MO: + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + /* fall through */ + + case WACOM_G4: + /* fall through */ + + case GRAPHIRE: + input_set_capability(input_dev, EV_REL, REL_WHEEL); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + + case WACOM_24HD: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + /* fall through */ + + case DTK: + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + wacom_setup_cintiq(wacom_wac); + break; + + case WACOM_22HD: + case WACOM_21UX2: + case WACOM_BEE: + case CINTIQ: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + wacom_setup_cintiq(wacom_wac); + break; + + case WACOM_13HD: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); + break; + + case INTUOS3: + case INTUOS3L: + case INTUOS3S: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + /* fall through */ + + case INTUOS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + wacom_setup_intuos(wacom_wac); + break; + + case INTUOS5: + case INTUOS5L: + case INTUOSPM: + case INTUOSPL: + case INTUOS5S: + case INTUOSPS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + wacom_setup_intuos(wacom_wac); + } else if (features->device_type == BTN_TOOL_FINGER) { + __clear_bit(ABS_MISC, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, + 0, features->y_max, 0, 0); + input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER); + } + break; + + case INTUOS4: + case INTUOS4L: + case INTUOS4S: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + wacom_setup_intuos(wacom_wac); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + + case WACOM_24HDT: + if (features->device_type == BTN_TOOL_FINGER) { + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + } + /* fall through */ + + case MTSCREEN: + case MTTPC: + case MTTPC_B: + case TABLETPC2FG: + if (features->device_type == BTN_TOOL_FINGER) { + unsigned int flags = INPUT_MT_DIRECT; + + if (wacom_wac->features.type == TABLETPC2FG) + flags = 0; + + input_mt_init_slots(input_dev, features->touch_max, flags); + } + /* fall through */ + + case TABLETPC: + case TABLETPCE: + __clear_bit(ABS_MISC, input_dev->absbit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + if (features->device_type != BTN_TOOL_PEN) + break; /* no need to process stylus stuff */ + + /* fall through */ + + case DTUS: + case PL: + case DTU: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + break; + + case PTU: + __set_bit(BTN_STYLUS2, input_dev->keybit); + /* fall through */ + + case PENPARTNER: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + + case INTUOSHT: + if (features->touch_max && + features->device_type == BTN_TOOL_FINGER) { + input_dev->evbit[0] |= BIT_MASK(EV_SW); + __set_bit(SW_MUTE_DEVICE, input_dev->swbit); + } + /* fall through */ + + case BAMBOO_PT: + __clear_bit(ABS_MISC, input_dev->absbit); + + if (features->device_type == BTN_TOOL_FINGER) { + + if (features->touch_max) { + /* touch interface */ + unsigned int flags = INPUT_MT_POINTER; + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { + input_set_abs_params(input_dev, + ABS_MT_TOUCH_MAJOR, + 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, + ABS_MT_TOUCH_MINOR, + 0, features->y_max, 0, 0); + } else { + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + flags = 0; + } + input_mt_init_slots(input_dev, features->touch_max, flags); + } else { + /* buttons/keys only interface */ + __clear_bit(ABS_X, input_dev->absbit); + __clear_bit(ABS_Y, input_dev->absbit); + __clear_bit(BTN_TOUCH, input_dev->keybit); + } + } else if (features->device_type == BTN_TOOL_PEN) { + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); + } + break; + + case CINTIQ_HYBRID: + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + wacom_setup_cintiq(wacom_wac); + break; + } + return 0; +} + +int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac) +{ + struct wacom_features *features = &wacom_wac->features; + int i; + + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + + /* kept for making legacy xf86-input-wacom working with the wheels */ + __set_bit(ABS_MISC, input_dev->absbit); + + /* kept for making legacy xf86-input-wacom accepting the pad */ + input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); + + switch (features->type) { + case WACOM_MO: + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case WACOM_G4: + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + input_set_capability(input_dev, EV_REL, REL_WHEEL); + break; + + case WACOM_24HD: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + + for (i = 0; i < 10; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + break; + + case DTK: + for (i = 0; i < 6; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + break; + + case WACOM_22HD: + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + /* fall through */ + + case WACOM_21UX2: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + __set_bit(BTN_BASE, input_dev->keybit); + __set_bit(BTN_BASE2, input_dev->keybit); + /* fall through */ + + case WACOM_BEE: + __set_bit(BTN_8, input_dev->keybit); + __set_bit(BTN_9, input_dev->keybit); + /* fall through */ + + case CINTIQ: + for (i = 0; i < 8; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + break; + + case WACOM_13HD: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case INTUOS3: + case INTUOS3L: + __set_bit(BTN_4, input_dev->keybit); + __set_bit(BTN_5, input_dev->keybit); + __set_bit(BTN_6, input_dev->keybit); + __set_bit(BTN_7, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + /* fall through */ + + case INTUOS3S: + __set_bit(BTN_0, input_dev->keybit); + __set_bit(BTN_1, input_dev->keybit); + __set_bit(BTN_2, input_dev->keybit); + __set_bit(BTN_3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + break; + + case INTUOS5: + case INTUOS5L: + case INTUOSPM: + case INTUOSPL: + __set_bit(BTN_7, input_dev->keybit); + __set_bit(BTN_8, input_dev->keybit); + /* fall through */ + + case INTUOS5S: + case INTUOSPS: + /* touch interface does not have the pad device */ + if (features->device_type != BTN_TOOL_PEN) + return 1; + + for (i = 0; i < 7; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case INTUOS4: + case INTUOS4L: + __set_bit(BTN_7, input_dev->keybit); + __set_bit(BTN_8, input_dev->keybit); + /* fall through */ + + case INTUOS4S: + for (i = 0; i < 7; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); + break; + + case CINTIQ_HYBRID: + for (i = 0; i < 9; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + break; + + case DTUS: + for (i = 0; i < 4; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + break; + + case INTUOSHT: + case BAMBOO_PT: + /* pad device is on the touch interface */ + if (features->device_type != BTN_TOOL_FINGER) + return 1; + + __clear_bit(ABS_MISC, input_dev->absbit); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + break; + + default: + /* no pad supported */ + return 1; + } + return 0; +} + +static const struct wacom_features wacom_features_0x00 = + { "Wacom Penpartner", 5040, 3780, 255, 0, + PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; +static const struct wacom_features wacom_features_0x10 = + { "Wacom Graphire", 10206, 7422, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x11 = + { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x12 = + { "Wacom Graphire2 5x7", 13918, 10206, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x13 = + { "Wacom Graphire3", 10208, 7424, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x14 = + { "Wacom Graphire3 6x8", 16704, 12064, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x15 = + { "Wacom Graphire4 4x5", 10208, 7424, 511, 63, + WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x16 = + { "Wacom Graphire4 6x8", 16704, 12064, 511, 63, + WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x17 = + { "Wacom BambooFun 4x5", 14760, 9225, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x18 = + { "Wacom BambooFun 6x8", 21648, 13530, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x19 = + { "Wacom Bamboo1 Medium", 16704, 12064, 511, 63, + GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x60 = + { "Wacom Volito", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; +static const struct wacom_features wacom_features_0x61 = + { "Wacom PenStation2", 3250, 2320, 255, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; +static const struct wacom_features wacom_features_0x62 = + { "Wacom Volito2 4x5", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; +static const struct wacom_features wacom_features_0x63 = + { "Wacom Volito2 2x3", 3248, 2320, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; +static const struct wacom_features wacom_features_0x64 = + { "Wacom PenPartner2", 3250, 2320, 511, 63, + GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; +static const struct wacom_features wacom_features_0x65 = + { "Wacom Bamboo", 14760, 9225, 511, 63, + WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x69 = + { "Wacom Bamboo1", 5104, 3712, 511, 63, + GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; +static const struct wacom_features wacom_features_0x6A = + { "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63, + GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x6B = + { "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63, + GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x20 = + { "Wacom Intuos 4x5", 12700, 10600, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x21 = + { "Wacom Intuos 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x22 = + { "Wacom Intuos 9x12", 30480, 24060, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x23 = + { "Wacom Intuos 12x12", 30480, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x24 = + { "Wacom Intuos 12x18", 45720, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x30 = + { "Wacom PL400", 5408, 4056, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x31 = + { "Wacom PL500", 6144, 4608, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x32 = + { "Wacom PL600", 6126, 4604, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x33 = + { "Wacom PL600SX", 6260, 5016, 255, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x34 = + { "Wacom PL550", 6144, 4608, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x35 = + { "Wacom PL800", 7220, 5780, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x37 = + { "Wacom PL700", 6758, 5406, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x38 = + { "Wacom PL510", 6282, 4762, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x39 = + { "Wacom DTU710", 34080, 27660, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0xC4 = + { "Wacom DTF521", 6282, 4762, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0xC0 = + { "Wacom DTF720", 6858, 5506, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0xC2 = + { "Wacom DTF720a", 6858, 5506, 511, 0, + PL, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x03 = + { "Wacom Cintiq Partner", 20480, 15360, 511, 0, + PTU, WACOM_PL_RES, WACOM_PL_RES }; +static const struct wacom_features wacom_features_0x41 = + { "Wacom Intuos2 4x5", 12700, 10600, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x42 = + { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x43 = + { "Wacom Intuos2 9x12", 30480, 24060, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x44 = + { "Wacom Intuos2 12x12", 30480, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x45 = + { "Wacom Intuos2 12x18", 45720, 31680, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xB0 = + { "Wacom Intuos3 4x5", 25400, 20320, 1023, 63, + INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB1 = + { "Wacom Intuos3 6x8", 40640, 30480, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB2 = + { "Wacom Intuos3 9x12", 60960, 45720, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB3 = + { "Wacom Intuos3 12x12", 60960, 60960, 1023, 63, + INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB4 = + { "Wacom Intuos3 12x19", 97536, 60960, 1023, 63, + INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB5 = + { "Wacom Intuos3 6x11", 54204, 31750, 1023, 63, + INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB7 = + { "Wacom Intuos3 4x6", 31496, 19685, 1023, 63, + INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB8 = + { "Wacom Intuos4 4x6", 31496, 19685, 2047, 63, + INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xB9 = + { "Wacom Intuos4 6x9", 44704, 27940, 2047, 63, + INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xBA = + { "Wacom Intuos4 8x13", 65024, 40640, 2047, 63, + INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xBB = + { "Wacom Intuos4 12x19", 97536, 60960, 2047, 63, + INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xBC = + { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, + INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x26 = + { "Wacom Intuos5 touch S", 31496, 19685, 2047, 63, + INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; +static const struct wacom_features wacom_features_0x27 = + { "Wacom Intuos5 touch M", 44704, 27940, 2047, 63, + INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; +static const struct wacom_features wacom_features_0x28 = + { "Wacom Intuos5 touch L", 65024, 40640, 2047, 63, + INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; +static const struct wacom_features wacom_features_0x29 = + { "Wacom Intuos5 S", 31496, 19685, 2047, 63, + INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x2A = + { "Wacom Intuos5 M", 44704, 27940, 2047, 63, + INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x314 = + { "Wacom Intuos Pro S", 31496, 19685, 2047, 63, + INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x315 = + { "Wacom Intuos Pro M", 44704, 27940, 2047, 63, + INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x317 = + { "Wacom Intuos Pro L", 65024, 40640, 2047, 63, + INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0xF4 = + { "Wacom Cintiq 24HD", 104280, 65400, 2047, 63, + WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; +static const struct wacom_features wacom_features_0xF8 = + { "Wacom Cintiq 24HD touch", 104280, 65400, 2047, 63, /* Pen */ + WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; +static const struct wacom_features wacom_features_0xF6 = + { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x3F = + { "Wacom Cintiq 21UX", 87200, 65600, 1023, 63, + CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xC5 = + { "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63, + WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xC6 = + { "Wacom Cintiq 12WX", 53020, 33440, 1023, 63, + WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x304 = + { "Wacom Cintiq 13HD", 59352, 33648, 1023, 63, + WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; +static const struct wacom_features wacom_features_0xC7 = + { "Wacom DTU1931", 37832, 30305, 511, 0, + PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xCE = + { "Wacom DTU2231", 47864, 27011, 511, 0, + DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE }; +static const struct wacom_features wacom_features_0xF0 = + { "Wacom DTU1631", 34623, 19553, 511, 0, + DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xFB = + { "Wacom DTU1031", 22096, 13960, 511, 0, + DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x57 = + { "Wacom DTK2241", 95640, 54060, 2047, 63, + DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; +static const struct wacom_features wacom_features_0x59 = /* Pen */ + { "Wacom DTH2242", 95640, 54060, 2047, 63, + DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D }; +static const struct wacom_features wacom_features_0x5D = /* Touch */ + { "Wacom DTH2242", .type = WACOM_24HDT, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0xCC = + { "Wacom Cintiq 21UX2", 87000, 65400, 2047, 63, + WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; +static const struct wacom_features wacom_features_0xFA = + { "Wacom Cintiq 22HD", 95640, 54060, 2047, 63, + WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; +static const struct wacom_features wacom_features_0x5B = + { "Wacom Cintiq 22HDT", 95640, 54060, 2047, 63, + WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; +static const struct wacom_features wacom_features_0x5E = + { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x90 = + { "Wacom ISDv4 90", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x93 = + { "Wacom ISDv4 93", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x97 = + { "Wacom ISDv4 97", 26202, 16325, 511, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x9A = + { "Wacom ISDv4 9A", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x9F = + { "Wacom ISDv4 9F", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xE2 = + { "Wacom ISDv4 E2", 26202, 16325, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xE3 = + { "Wacom ISDv4 E3", 26202, 16325, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xE5 = + { "Wacom ISDv4 E5", 26202, 16325, 255, 0, + MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xE6 = + { "Wacom ISDv4 E6", 27760, 15694, 255, 0, + TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xEC = + { "Wacom ISDv4 EC", 25710, 14500, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xED = + { "Wacom ISDv4 ED", 26202, 16325, 255, 0, + TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xEF = + { "Wacom ISDv4 EF", 26202, 16325, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x100 = + { "Wacom ISDv4 100", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x101 = + { "Wacom ISDv4 101", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10D = + { "Wacom ISDv4 10D", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10E = + { "Wacom ISDv4 10E", 27760, 15694, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10F = + { "Wacom ISDv4 10F", 27760, 15694, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x116 = + { "Wacom ISDv4 116", 26202, 16325, 255, 0, + TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x4001 = + { "Wacom ISDv4 4001", 26202, 16325, 255, 0, + MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x4004 = + { "Wacom ISDv4 4004", 11060, 6220, 255, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x5000 = + { "Wacom ISDv4 5000", 27848, 15752, 1023, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x5002 = + { "Wacom ISDv4 5002", 29576, 16724, 1023, 0, + MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x47 = + { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, + INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x84 = + { "Wacom Wireless Receiver", 0, 0, 0, 0, + WIRELESS, 0, 0, .touch_max = 16 }; +static const struct wacom_features wacom_features_0xD0 = + { "Wacom Bamboo 2FG", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD1 = + { "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD2 = + { "Wacom Bamboo Craft", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD3 = + { "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD4 = + { "Wacom Bamboo Pen", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xD5 = + { "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xD6 = + { "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD7 = + { "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xD8 = + { "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xDA = + { "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xDB = + { "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; +static const struct wacom_features wacom_features_0xDD = + { "Wacom Bamboo Connect", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xDE = + { "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; +static const struct wacom_features wacom_features_0xDF = + { "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; +static const struct wacom_features wacom_features_0x300 = + { "Wacom Bamboo One S", 14720, 9225, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x301 = + { "Wacom Bamboo One M", 21648, 13530, 1023, 31, + BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x302 = + { "Wacom Intuos PT S", 15200, 9500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x303 = + { "Wacom Intuos PT M", 21600, 13500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x30E = + { "Wacom Intuos S", 15200, 9500, 1023, 31, + INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; +static const struct wacom_features wacom_features_0x6004 = + { "ISD-V4", 12800, 8000, 255, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x307 = + { "Wacom ISDv5 307", 59352, 33648, 2047, 63, + CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; +static const struct wacom_features wacom_features_0x309 = + { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10, + .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; + +#define USB_DEVICE_WACOM(prod) \ + HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ + .driver_data = (kernel_ulong_t)&wacom_features_##prod + +#define USB_DEVICE_LENOVO(prod) \ + HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ + .driver_data = (kernel_ulong_t)&wacom_features_##prod + +const struct hid_device_id wacom_ids[] = { + { USB_DEVICE_WACOM(0x00) }, + { USB_DEVICE_WACOM(0x03) }, + { USB_DEVICE_WACOM(0x10) }, + { USB_DEVICE_WACOM(0x11) }, + { USB_DEVICE_WACOM(0x12) }, + { USB_DEVICE_WACOM(0x13) }, + { USB_DEVICE_WACOM(0x14) }, + { USB_DEVICE_WACOM(0x15) }, + { USB_DEVICE_WACOM(0x16) }, + { USB_DEVICE_WACOM(0x17) }, + { USB_DEVICE_WACOM(0x18) }, + { USB_DEVICE_WACOM(0x19) }, + { USB_DEVICE_WACOM(0x20) }, + { USB_DEVICE_WACOM(0x21) }, + { USB_DEVICE_WACOM(0x22) }, + { USB_DEVICE_WACOM(0x23) }, + { USB_DEVICE_WACOM(0x24) }, + { USB_DEVICE_WACOM(0x26) }, + { USB_DEVICE_WACOM(0x27) }, + { USB_DEVICE_WACOM(0x28) }, + { USB_DEVICE_WACOM(0x29) }, + { USB_DEVICE_WACOM(0x2A) }, + { USB_DEVICE_WACOM(0x30) }, + { USB_DEVICE_WACOM(0x31) }, + { USB_DEVICE_WACOM(0x32) }, + { USB_DEVICE_WACOM(0x33) }, + { USB_DEVICE_WACOM(0x34) }, + { USB_DEVICE_WACOM(0x35) }, + { USB_DEVICE_WACOM(0x37) }, + { USB_DEVICE_WACOM(0x38) }, + { USB_DEVICE_WACOM(0x39) }, + { USB_DEVICE_WACOM(0x3F) }, + { USB_DEVICE_WACOM(0x41) }, + { USB_DEVICE_WACOM(0x42) }, + { USB_DEVICE_WACOM(0x43) }, + { USB_DEVICE_WACOM(0x44) }, + { USB_DEVICE_WACOM(0x45) }, + { USB_DEVICE_WACOM(0x47) }, + { USB_DEVICE_WACOM(0x57) }, + { USB_DEVICE_WACOM(0x59) }, + { USB_DEVICE_WACOM(0x5B) }, + { USB_DEVICE_WACOM(0x5D) }, + { USB_DEVICE_WACOM(0x5E) }, + { USB_DEVICE_WACOM(0x60) }, + { USB_DEVICE_WACOM(0x61) }, + { USB_DEVICE_WACOM(0x62) }, + { USB_DEVICE_WACOM(0x63) }, + { USB_DEVICE_WACOM(0x64) }, + { USB_DEVICE_WACOM(0x65) }, + { USB_DEVICE_WACOM(0x69) }, + { USB_DEVICE_WACOM(0x6A) }, + { USB_DEVICE_WACOM(0x6B) }, + { USB_DEVICE_WACOM(0x84) }, + { USB_DEVICE_WACOM(0x90) }, + { USB_DEVICE_WACOM(0x93) }, + { USB_DEVICE_WACOM(0x97) }, + { USB_DEVICE_WACOM(0x9A) }, + { USB_DEVICE_WACOM(0x9F) }, + { USB_DEVICE_WACOM(0xB0) }, + { USB_DEVICE_WACOM(0xB1) }, + { USB_DEVICE_WACOM(0xB2) }, + { USB_DEVICE_WACOM(0xB3) }, + { USB_DEVICE_WACOM(0xB4) }, + { USB_DEVICE_WACOM(0xB5) }, + { USB_DEVICE_WACOM(0xB7) }, + { USB_DEVICE_WACOM(0xB8) }, + { USB_DEVICE_WACOM(0xB9) }, + { USB_DEVICE_WACOM(0xBA) }, + { USB_DEVICE_WACOM(0xBB) }, + { USB_DEVICE_WACOM(0xBC) }, + { USB_DEVICE_WACOM(0xC0) }, + { USB_DEVICE_WACOM(0xC2) }, + { USB_DEVICE_WACOM(0xC4) }, + { USB_DEVICE_WACOM(0xC5) }, + { USB_DEVICE_WACOM(0xC6) }, + { USB_DEVICE_WACOM(0xC7) }, + { USB_DEVICE_WACOM(0xCC) }, + { USB_DEVICE_WACOM(0xCE) }, + { USB_DEVICE_WACOM(0xD0) }, + { USB_DEVICE_WACOM(0xD1) }, + { USB_DEVICE_WACOM(0xD2) }, + { USB_DEVICE_WACOM(0xD3) }, + { USB_DEVICE_WACOM(0xD4) }, + { USB_DEVICE_WACOM(0xD5) }, + { USB_DEVICE_WACOM(0xD6) }, + { USB_DEVICE_WACOM(0xD7) }, + { USB_DEVICE_WACOM(0xD8) }, + { USB_DEVICE_WACOM(0xDA) }, + { USB_DEVICE_WACOM(0xDB) }, + { USB_DEVICE_WACOM(0xDD) }, + { USB_DEVICE_WACOM(0xDE) }, + { USB_DEVICE_WACOM(0xDF) }, + { USB_DEVICE_WACOM(0xE2) }, + { USB_DEVICE_WACOM(0xE3) }, + { USB_DEVICE_WACOM(0xE5) }, + { USB_DEVICE_WACOM(0xE6) }, + { USB_DEVICE_WACOM(0xEC) }, + { USB_DEVICE_WACOM(0xED) }, + { USB_DEVICE_WACOM(0xEF) }, + { USB_DEVICE_WACOM(0xF0) }, + { USB_DEVICE_WACOM(0xF4) }, + { USB_DEVICE_WACOM(0xF6) }, + { USB_DEVICE_WACOM(0xF8) }, + { USB_DEVICE_WACOM(0xFA) }, + { USB_DEVICE_WACOM(0xFB) }, + { USB_DEVICE_WACOM(0x100) }, + { USB_DEVICE_WACOM(0x101) }, + { USB_DEVICE_WACOM(0x10D) }, + { USB_DEVICE_WACOM(0x10E) }, + { USB_DEVICE_WACOM(0x10F) }, + { USB_DEVICE_WACOM(0x116) }, + { USB_DEVICE_WACOM(0x300) }, + { USB_DEVICE_WACOM(0x301) }, + { USB_DEVICE_WACOM(0x302) }, + { USB_DEVICE_WACOM(0x303) }, + { USB_DEVICE_WACOM(0x304) }, + { USB_DEVICE_WACOM(0x307) }, + { USB_DEVICE_WACOM(0x309) }, + { USB_DEVICE_WACOM(0x30E) }, + { USB_DEVICE_WACOM(0x314) }, + { USB_DEVICE_WACOM(0x315) }, + { USB_DEVICE_WACOM(0x317) }, + { USB_DEVICE_WACOM(0x4001) }, + { USB_DEVICE_WACOM(0x4004) }, + { USB_DEVICE_WACOM(0x5000) }, + { USB_DEVICE_WACOM(0x5002) }, + { } +}; +MODULE_DEVICE_TABLE(hid, wacom_ids); diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h new file mode 100644 index 0000000..4c59247 --- /dev/null +++ b/drivers/hid/wacom_wac.h @@ -0,0 +1,169 @@ +/* + * drivers/input/tablet/wacom_wac.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_WAC_H +#define WACOM_WAC_H + +#include + +/* maximum packet length for USB devices */ +#define WACOM_PKGLEN_MAX 68 + +#define WACOM_NAME_MAX 64 + +/* packet length for individual models */ +#define WACOM_PKGLEN_PENPRTN 7 +#define WACOM_PKGLEN_GRAPHIRE 8 +#define WACOM_PKGLEN_BBFUN 9 +#define WACOM_PKGLEN_INTUOS 10 +#define WACOM_PKGLEN_TPC1FG 5 +#define WACOM_PKGLEN_TPC1FG_B 10 +#define WACOM_PKGLEN_TPC2FG 14 +#define WACOM_PKGLEN_BBTOUCH 20 +#define WACOM_PKGLEN_BBTOUCH3 64 +#define WACOM_PKGLEN_BBPEN 10 +#define WACOM_PKGLEN_WIRELESS 32 +#define WACOM_PKGLEN_MTOUCH 62 +#define WACOM_PKGLEN_MTTPC 40 +#define WACOM_PKGLEN_DTUS 68 +#define WACOM_PKGLEN_PENABLED 8 + +/* wacom data size per MT contact */ +#define WACOM_BYTES_PER_MT_PACKET 11 +#define WACOM_BYTES_PER_24HDT_PACKET 14 + +/* device IDs */ +#define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A +#define PAD_DEVICE_ID 0x0F + +/* wacom data packet report IDs */ +#define WACOM_REPORT_PENABLED 2 +#define WACOM_REPORT_INTUOSREAD 5 +#define WACOM_REPORT_INTUOSWRITE 6 +#define WACOM_REPORT_INTUOSPAD 12 +#define WACOM_REPORT_INTUOS5PAD 3 +#define WACOM_REPORT_DTUSPAD 21 +#define WACOM_REPORT_TPC1FG 6 +#define WACOM_REPORT_TPC2FG 13 +#define WACOM_REPORT_TPCMT 13 +#define WACOM_REPORT_TPCMT2 3 +#define WACOM_REPORT_TPCHID 15 +#define WACOM_REPORT_TPCST 16 +#define WACOM_REPORT_DTUS 17 +#define WACOM_REPORT_TPC1FGE 18 +#define WACOM_REPORT_24HDT 1 +#define WACOM_REPORT_WL 128 +#define WACOM_REPORT_USB 192 + +/* device quirks */ +#define WACOM_QUIRK_MULTI_INPUT 0x0001 +#define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 +#define WACOM_QUIRK_NO_INPUT 0x0004 +#define WACOM_QUIRK_MONITOR 0x0008 + +enum { + PENPARTNER = 0, + GRAPHIRE, + WACOM_G4, + PTU, + PL, + DTU, + DTUS, + INTUOS, + INTUOS3S, + INTUOS3, + INTUOS3L, + INTUOS4S, + INTUOS4, + INTUOS4L, + INTUOS5S, + INTUOS5, + INTUOS5L, + INTUOSPS, + INTUOSPM, + INTUOSPL, + INTUOSHT, + WACOM_21UX2, + WACOM_22HD, + DTK, + WACOM_24HD, + CINTIQ_HYBRID, + CINTIQ, + WACOM_BEE, + WACOM_13HD, + WACOM_MO, + WIRELESS, + BAMBOO_PT, + WACOM_24HDT, + TABLETPC, /* add new TPC below */ + TABLETPCE, + TABLETPC2FG, + MTSCREEN, + MTTPC, + MTTPC_B, + MAX_TYPE +}; + +struct wacom_features { + const char *name; + int x_max; + int y_max; + int pressure_max; + int distance_max; + int type; + int x_resolution; + int y_resolution; + int x_min; + int y_min; + int device_type; + int x_phy; + int y_phy; + unsigned unit; + int unitExpo; + int x_fuzz; + int y_fuzz; + int pressure_fuzz; + int distance_fuzz; + unsigned quirks; + unsigned touch_max; + int oVid; + int oPid; + int pktlen; + bool check_for_hid_type; + int hid_type; +}; + +struct wacom_shared { + bool stylus_in_proximity; + bool touch_down; + /* for wireless device to access USB interfaces */ + unsigned touch_max; + int type; + struct input_dev *touch_input; +}; + +struct wacom_wac { + char name[WACOM_NAME_MAX]; + char pad_name[WACOM_NAME_MAX]; + unsigned char data[WACOM_PKGLEN_MAX]; + int tool[2]; + int id[2]; + __u32 serial[2]; + struct wacom_features features; + struct wacom_shared *shared; + struct input_dev *input; + struct input_dev *pad_input; + int pid; + int battery_capacity; + int num_contacts_left; +}; + +#endif diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index bed7cbf..cd9c79e 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -73,20 +73,4 @@ config TABLET_USB_KBTAB To compile this driver as a module, choose M here: the module will be called kbtab. -config TABLET_USB_WACOM - tristate "Wacom Intuos/Graphire tablet support (USB)" - depends on USB_ARCH_HAS_HCD - select POWER_SUPPLY - select USB - select NEW_LEDS - select LEDS_CLASS - help - Say Y here if you want to use the USB version of the Wacom Intuos - or Graphire tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called wacom. - endif diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile index 3f6c252..cc3bc17 100644 --- a/drivers/input/tablet/Makefile +++ b/drivers/input/tablet/Makefile @@ -2,12 +2,9 @@ # Makefile for the tablet drivers # -# Multipart objects. -wacom-objs := wacom_wac.o wacom_sys.o obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o -obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h deleted file mode 100644 index dd67b7d..0000000 --- a/drivers/input/tablet/wacom.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * drivers/input/tablet/wacom.h - * - * USB Wacom tablet support - * - * Copyright (c) 2000-2004 Vojtech Pavlik - * Copyright (c) 2000 Andreas Bach Aaen - * Copyright (c) 2000 Clifford Wolf - * Copyright (c) 2000 Sam Mosel - * Copyright (c) 2000 James E. Blair - * Copyright (c) 2000 Daniel Egger - * Copyright (c) 2001 Frederic Lepied - * Copyright (c) 2004 Panagiotis Issaris - * Copyright (c) 2002-2011 Ping Cheng - * - * ChangeLog: - * v0.1 (vp) - Initial release - * v0.2 (aba) - Support for all buttons / combinations - * v0.3 (vp) - Support for Intuos added - * v0.4 (sm) - Support for more Intuos models, menustrip - * relative mode, proximity. - * v0.5 (vp) - Big cleanup, nifty features removed, - * they belong in userspace - * v1.8 (vp) - Submit URB only when operating, moved to CVS, - * use input_report_key instead of report_btn and - * other cleanups - * v1.11 (vp) - Add URB ->dev setting for new kernels - * v1.11 (jb) - Add support for the 4D Mouse & Lens - * v1.12 (de) - Add support for two more inking pen IDs - * v1.14 (vp) - Use new USB device id probing scheme. - * Fix Wacom Graphire mouse wheel - * v1.18 (vp) - Fix mouse wheel direction - * Make mouse relative - * v1.20 (fl) - Report tool id for Intuos devices - * - Multi tools support - * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) - * - Add PL models support - * - Fix Wacom Graphire mouse wheel again - * v1.21 (vp) - Removed protocol descriptions - * - Added MISC_SERIAL for tool serial numbers - * (gb) - Identify version on module load. - * v1.21.1 (fl) - added Graphire2 support - * v1.21.2 (fl) - added Intuos2 support - * - added all the PL ids - * v1.21.3 (fl) - added another eraser id from Neil Okamoto - * - added smooth filter for Graphire from Peri Hankey - * - added PenPartner support from Olaf van Es - * - new tool ids from Ole Martin Bjoerndalen - * v1.29 (pc) - Add support for more tablets - * - Fix pressure reporting - * v1.30 (vp) - Merge 2.4 and 2.5 drivers - * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse - * - Cleanups here and there - * v1.30.1 (pi) - Added Graphire3 support - * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... - * v1.43 (pc) - Added support for Cintiq 21UX - * - Fixed a Graphire bug - * - Merged wacom_intuos3_irq into wacom_intuos_irq - * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. - * - Report Device IDs - * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 - * - Minor data report fix - * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, - * - where wacom_sys.c deals with system specific code, - * - and wacom_wac.c deals with Wacom specific code - * - Support Intuos3 4x6 - * v1.47 (pc) - Added support for Bamboo - * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX - * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) - * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 - * v1.51 (pc) - Added support for Intuos4 - * v1.52 (pc) - Query Wacom data upon system resume - * - add defines for features->type - * - add new devices (0x9F, 0xE2, and 0XE3) - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef WACOM_H -#define WACOM_H -#include -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v1.53" -#define DRIVER_AUTHOR "Vojtech Pavlik " -#define DRIVER_DESC "USB Wacom tablet driver" -#define DRIVER_LICENSE "GPL" - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -#define USB_VENDOR_ID_WACOM 0x056a -#define USB_VENDOR_ID_LENOVO 0x17ef - -struct wacom { - struct usb_device *usbdev; - struct usb_interface *intf; - struct wacom_wac wacom_wac; - struct hid_device *hdev; - struct mutex lock; - struct work_struct work; - struct wacom_led { - u8 select[2]; /* status led selector (0..3) */ - u8 llv; /* status led brightness no button (1..127) */ - u8 hlv; /* status led brightness button pressed (1..127) */ - u8 img_lum; /* OLED matrix display brightness */ - } led; - struct power_supply battery; -}; - -static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) -{ - struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); - schedule_work(&wacom->work); -} - -extern const struct hid_device_id wacom_ids[]; - -void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); -void wacom_setup_device_quirks(struct wacom_features *features); -int wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac); -int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac); -#endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c deleted file mode 100644 index 06e304b..0000000 --- a/drivers/input/tablet/wacom_sys.c +++ /dev/null @@ -1,1257 +0,0 @@ -/* - * drivers/input/tablet/wacom_sys.c - * - * USB Wacom tablet support - system specific code - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include "wacom_wac.h" -#include "wacom.h" -#include - -#define WAC_MSG_RETRIES 5 - -#define WAC_CMD_LED_CONTROL 0x20 -#define WAC_CMD_ICON_START 0x21 -#define WAC_CMD_ICON_XFER 0x23 -#define WAC_CMD_RETRIES 10 - -static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id, - void *buf, size_t size, unsigned int retries) -{ - int retval; - - do { - retval = hid_hw_raw_request(hdev, id, buf, size, type, - HID_REQ_GET_REPORT); - } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); - - return retval; -} - -static int wacom_set_report(struct hid_device *hdev, u8 type, u8 id, - void *buf, size_t size, unsigned int retries) -{ - int retval; - - do { - retval = hid_hw_raw_request(hdev, id, buf, size, type, - HID_REQ_SET_REPORT); - } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); - - return retval; -} - -static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - - if (size > WACOM_PKGLEN_MAX) - return 1; - - memcpy(wacom->wacom_wac.data, raw_data, size); - - wacom_wac_irq(&wacom->wacom_wac, size); - - return 0; -} - -static int wacom_open(struct input_dev *dev) -{ - struct wacom *wacom = input_get_drvdata(dev); - int retval; - - mutex_lock(&wacom->lock); - retval = hid_hw_open(wacom->hdev); - mutex_unlock(&wacom->lock); - - return retval; -} - -static void wacom_close(struct input_dev *dev) -{ - struct wacom *wacom = input_get_drvdata(dev); - - mutex_lock(&wacom->lock); - hid_hw_close(wacom->hdev); - mutex_unlock(&wacom->lock); -} - -/* - * Calculate the resolution of the X or Y axis using hidinput_calc_abs_res. - */ -static int wacom_calc_hid_res(int logical_extents, int physical_extents, - unsigned unit, int exponent) -{ - struct hid_field field = { - .logical_maximum = logical_extents, - .physical_maximum = physical_extents, - .unit = unit, - .unit_exponent = exponent, - }; - - return hidinput_calc_abs_res(&field, ABS_X); -} - -static void wacom_feature_mapping(struct hid_device *hdev, - struct hid_field *field, struct hid_usage *usage) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_features *features = &wacom->wacom_wac.features; - - switch (usage->hid) { - case HID_DG_CONTACTMAX: - /* leave touch_max as is if predefined */ - if (!features->touch_max) - features->touch_max = field->value[0]; - break; - } -} - -/* - * Interface Descriptor of wacom devices can be incomplete and - * inconsistent so wacom_features table is used to store stylus - * device's packet lengths, various maximum values, and tablet - * resolution based on product ID's. - * - * For devices that contain 2 interfaces, wacom_features table is - * inaccurate for the touch interface. Since the Interface Descriptor - * for touch interfaces has pretty complete data, this function exists - * to query tablet for this missing information instead of hard coding in - * an additional table. - * - * A typical Interface Descriptor for a stylus will contain a - * boot mouse application collection that is not of interest and this - * function will ignore it. - * - * It also contains a digitizer application collection that also is not - * of interest since any information it contains would be duplicate - * of what is in wacom_features. Usually it defines a report of an array - * of bytes that could be used as max length of the stylus packet returned. - * If it happens to define a Digitizer-Stylus Physical Collection then - * the X and Y logical values contain valid data but it is ignored. - * - * A typical Interface Descriptor for a touch interface will contain a - * Digitizer-Finger Physical Collection which will define both logical - * X/Y maximum as well as the physical size of tablet. Since touch - * interfaces haven't supported pressure or distance, this is enough - * information to override invalid values in the wacom_features table. - * - * Intuos5 touch interface and 3rd gen Bamboo Touch do not contain useful - * data. We deal with them after returning from this function. - */ -static void wacom_usage_mapping(struct hid_device *hdev, - struct hid_field *field, struct hid_usage *usage) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_features *features = &wacom->wacom_wac.features; - bool finger = (field->logical == HID_DG_FINGER) || - (field->physical == HID_DG_FINGER); - bool pen = (field->logical == HID_DG_STYLUS) || - (field->physical == HID_DG_STYLUS); - - /* - * Requiring Stylus Usage will ignore boot mouse - * X/Y values and some cases of invalid Digitizer X/Y - * values commonly reported. - */ - if (!pen && !finger) - return; - - if (finger && !features->touch_max) - /* touch device at least supports one touch point */ - features->touch_max = 1; - - switch (usage->hid) { - case HID_GD_X: - features->x_max = field->logical_maximum; - if (finger) { - features->device_type = BTN_TOOL_FINGER; - features->x_phy = field->physical_maximum; - if (features->type != BAMBOO_PT) { - features->unit = field->unit; - features->unitExpo = field->unit_exponent; - } - } else { - features->device_type = BTN_TOOL_PEN; - } - break; - case HID_GD_Y: - features->y_max = field->logical_maximum; - if (finger) { - features->y_phy = field->physical_maximum; - if (features->type != BAMBOO_PT) { - features->unit = field->unit; - features->unitExpo = field->unit_exponent; - } - } - break; - case HID_DG_TIPPRESSURE: - if (pen) - features->pressure_max = field->logical_maximum; - break; - } -} - -static void wacom_parse_hid(struct hid_device *hdev, - struct wacom_features *features) -{ - struct hid_report_enum *rep_enum; - struct hid_report *hreport; - int i, j; - - /* check features first */ - rep_enum = &hdev->report_enum[HID_FEATURE_REPORT]; - list_for_each_entry(hreport, &rep_enum->report_list, list) { - for (i = 0; i < hreport->maxfield; i++) { - /* Ignore if report count is out of bounds. */ - if (hreport->field[i]->report_count < 1) - continue; - - for (j = 0; j < hreport->field[i]->maxusage; j++) { - wacom_feature_mapping(hdev, hreport->field[i], - hreport->field[i]->usage + j); - } - } - } - - /* now check the input usages */ - rep_enum = &hdev->report_enum[HID_INPUT_REPORT]; - list_for_each_entry(hreport, &rep_enum->report_list, list) { - - if (!hreport->maxfield) - continue; - - for (i = 0; i < hreport->maxfield; i++) - for (j = 0; j < hreport->field[i]->maxusage; j++) - wacom_usage_mapping(hdev, hreport->field[i], - hreport->field[i]->usage + j); - } -} - -static int wacom_set_device_mode(struct hid_device *hdev, int report_id, - int length, int mode) -{ - unsigned char *rep_data; - int error = -ENOMEM, limit = 0; - - rep_data = kzalloc(length, GFP_KERNEL); - if (!rep_data) - return error; - - do { - rep_data[0] = report_id; - rep_data[1] = mode; - - error = wacom_set_report(hdev, HID_FEATURE_REPORT, - report_id, rep_data, length, 1); - if (error >= 0) - error = wacom_get_report(hdev, HID_FEATURE_REPORT, - report_id, rep_data, length, 1); - } while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES); - - kfree(rep_data); - - return error < 0 ? error : 0; -} - -/* - * Switch the tablet into its most-capable mode. Wacom tablets are - * typically configured to power-up in a mode which sends mouse-like - * reports to the OS. To get absolute position, pressure data, etc. - * from the tablet, it is necessary to switch the tablet out of this - * mode and into one which sends the full range of tablet data. - */ -static int wacom_query_tablet_data(struct hid_device *hdev, - struct wacom_features *features) -{ - if (features->device_type == BTN_TOOL_FINGER) { - if (features->type > TABLETPC) { - /* MT Tablet PC touch */ - return wacom_set_device_mode(hdev, 3, 4, 4); - } - else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) { - return wacom_set_device_mode(hdev, 18, 3, 2); - } - } else if (features->device_type == BTN_TOOL_PEN) { - if (features->type <= BAMBOO_PT && features->type != WIRELESS) { - return wacom_set_device_mode(hdev, 2, 2, 2); - } - } - - return 0; -} - -static void wacom_retrieve_hid_descriptor(struct hid_device *hdev, - struct wacom_features *features) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct usb_interface *intf = wacom->intf; - - /* default features */ - features->device_type = BTN_TOOL_PEN; - features->x_fuzz = 4; - features->y_fuzz = 4; - features->pressure_fuzz = 0; - features->distance_fuzz = 0; - - /* - * The wireless device HID is basic and layout conflicts with - * other tablets (monitor and touch interface can look like pen). - * Skip the query for this type and modify defaults based on - * interface number. - */ - if (features->type == WIRELESS) { - if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { - features->device_type = 0; - } else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) { - features->device_type = BTN_TOOL_FINGER; - features->pktlen = WACOM_PKGLEN_BBTOUCH3; - } - } - - /* only devices that support touch need to retrieve the info */ - if (features->type < BAMBOO_PT) - return; - - wacom_parse_hid(hdev, features); -} - -struct wacom_hdev_data { - struct list_head list; - struct kref kref; - struct hid_device *dev; - struct wacom_shared shared; -}; - -static LIST_HEAD(wacom_udev_list); -static DEFINE_MUTEX(wacom_udev_list_lock); - -static bool wacom_are_sibling(struct hid_device *hdev, - struct hid_device *sibling) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_features *features = &wacom->wacom_wac.features; - int vid = features->oVid; - int pid = features->oPid; - int n1,n2; - - if (vid == 0 && pid == 0) { - vid = hdev->vendor; - pid = hdev->product; - } - - if (vid != sibling->vendor || pid != sibling->product) - return false; - - /* Compare the physical path. */ - n1 = strrchr(hdev->phys, '.') - hdev->phys; - n2 = strrchr(sibling->phys, '.') - sibling->phys; - if (n1 != n2 || n1 <= 0 || n2 <= 0) - return false; - - return !strncmp(hdev->phys, sibling->phys, n1); -} - -static struct wacom_hdev_data *wacom_get_hdev_data(struct hid_device *hdev) -{ - struct wacom_hdev_data *data; - - list_for_each_entry(data, &wacom_udev_list, list) { - if (wacom_are_sibling(hdev, data->dev)) { - kref_get(&data->kref); - return data; - } - } - - return NULL; -} - -static int wacom_add_shared_data(struct hid_device *hdev) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_wac *wacom_wac = &wacom->wacom_wac; - struct wacom_hdev_data *data; - int retval = 0; - - mutex_lock(&wacom_udev_list_lock); - - data = wacom_get_hdev_data(hdev); - if (!data) { - data = kzalloc(sizeof(struct wacom_hdev_data), GFP_KERNEL); - if (!data) { - retval = -ENOMEM; - goto out; - } - - kref_init(&data->kref); - data->dev = hdev; - list_add_tail(&data->list, &wacom_udev_list); - } - - wacom_wac->shared = &data->shared; - -out: - mutex_unlock(&wacom_udev_list_lock); - return retval; -} - -static void wacom_release_shared_data(struct kref *kref) -{ - struct wacom_hdev_data *data = - container_of(kref, struct wacom_hdev_data, kref); - - mutex_lock(&wacom_udev_list_lock); - list_del(&data->list); - mutex_unlock(&wacom_udev_list_lock); - - kfree(data); -} - -static void wacom_remove_shared_data(struct wacom_wac *wacom) -{ - struct wacom_hdev_data *data; - - if (wacom->shared) { - data = container_of(wacom->shared, struct wacom_hdev_data, shared); - kref_put(&data->kref, wacom_release_shared_data); - wacom->shared = NULL; - } -} - -static int wacom_led_control(struct wacom *wacom) -{ - unsigned char *buf; - int retval; - - buf = kzalloc(9, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (wacom->wacom_wac.features.type >= INTUOS5S && - wacom->wacom_wac.features.type <= INTUOSPL) { - /* - * Touch Ring and crop mark LED luminance may take on - * one of four values: - * 0 = Low; 1 = Medium; 2 = High; 3 = Off - */ - int ring_led = wacom->led.select[0] & 0x03; - int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03; - int crop_lum = 0; - - buf[0] = WAC_CMD_LED_CONTROL; - buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led); - } - else { - int led = wacom->led.select[0] | 0x4; - - if (wacom->wacom_wac.features.type == WACOM_21UX2 || - wacom->wacom_wac.features.type == WACOM_24HD) - led |= (wacom->led.select[1] << 4) | 0x40; - - buf[0] = WAC_CMD_LED_CONTROL; - buf[1] = led; - buf[2] = wacom->led.llv; - buf[3] = wacom->led.hlv; - buf[4] = wacom->led.img_lum; - } - - retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_LED_CONTROL, buf, 9, WAC_CMD_RETRIES); - kfree(buf); - - return retval; -} - -static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img) -{ - unsigned char *buf; - int i, retval; - - buf = kzalloc(259, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - /* Send 'start' command */ - buf[0] = WAC_CMD_ICON_START; - buf[1] = 1; - retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_ICON_START, buf, 2, WAC_CMD_RETRIES); - if (retval < 0) - goto out; - - buf[0] = WAC_CMD_ICON_XFER; - buf[1] = button_id & 0x07; - for (i = 0; i < 4; i++) { - buf[2] = i; - memcpy(buf + 3, img + i * 256, 256); - - retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_ICON_XFER, - buf, 259, WAC_CMD_RETRIES); - if (retval < 0) - break; - } - - /* Send 'stop' */ - buf[0] = WAC_CMD_ICON_START; - buf[1] = 0; - wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, WAC_CMD_ICON_START, - buf, 2, WAC_CMD_RETRIES); - -out: - kfree(buf); - return retval; -} - -static ssize_t wacom_led_select_store(struct device *dev, int set_id, - const char *buf, size_t count) -{ - struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct wacom *wacom = hid_get_drvdata(hdev); - unsigned int id; - int err; - - err = kstrtouint(buf, 10, &id); - if (err) - return err; - - mutex_lock(&wacom->lock); - - wacom->led.select[set_id] = id & 0x3; - err = wacom_led_control(wacom); - - mutex_unlock(&wacom->lock); - - return err < 0 ? err : count; -} - -#define DEVICE_LED_SELECT_ATTR(SET_ID) \ -static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \ - struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return wacom_led_select_store(dev, SET_ID, buf, count); \ -} \ -static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ - struct wacom *wacom = hid_get_drvdata(hdev); \ - return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \ -} \ -static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \ - wacom_led##SET_ID##_select_show, \ - wacom_led##SET_ID##_select_store) - -DEVICE_LED_SELECT_ATTR(0); -DEVICE_LED_SELECT_ATTR(1); - -static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest, - const char *buf, size_t count) -{ - unsigned int value; - int err; - - err = kstrtouint(buf, 10, &value); - if (err) - return err; - - mutex_lock(&wacom->lock); - - *dest = value & 0x7f; - err = wacom_led_control(wacom); - - mutex_unlock(&wacom->lock); - - return err < 0 ? err : count; -} - -#define DEVICE_LUMINANCE_ATTR(name, field) \ -static ssize_t wacom_##name##_luminance_store(struct device *dev, \ - struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct hid_device *hdev = container_of(dev, struct hid_device, dev);\ - struct wacom *wacom = hid_get_drvdata(hdev); \ - \ - return wacom_luminance_store(wacom, &wacom->led.field, \ - buf, count); \ -} \ -static DEVICE_ATTR(name##_luminance, S_IWUSR, \ - NULL, wacom_##name##_luminance_store) - -DEVICE_LUMINANCE_ATTR(status0, llv); -DEVICE_LUMINANCE_ATTR(status1, hlv); -DEVICE_LUMINANCE_ATTR(buttons, img_lum); - -static ssize_t wacom_button_image_store(struct device *dev, int button_id, - const char *buf, size_t count) -{ - struct hid_device *hdev = container_of(dev, struct hid_device, dev); - struct wacom *wacom = hid_get_drvdata(hdev); - int err; - - if (count != 1024) - return -EINVAL; - - mutex_lock(&wacom->lock); - - err = wacom_led_putimage(wacom, button_id, buf); - - mutex_unlock(&wacom->lock); - - return err < 0 ? err : count; -} - -#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \ -static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \ - struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return wacom_button_image_store(dev, BUTTON_ID, buf, count); \ -} \ -static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR, \ - NULL, wacom_btnimg##BUTTON_ID##_store) - -DEVICE_BTNIMG_ATTR(0); -DEVICE_BTNIMG_ATTR(1); -DEVICE_BTNIMG_ATTR(2); -DEVICE_BTNIMG_ATTR(3); -DEVICE_BTNIMG_ATTR(4); -DEVICE_BTNIMG_ATTR(5); -DEVICE_BTNIMG_ATTR(6); -DEVICE_BTNIMG_ATTR(7); - -static struct attribute *cintiq_led_attrs[] = { - &dev_attr_status_led0_select.attr, - &dev_attr_status_led1_select.attr, - NULL -}; - -static struct attribute_group cintiq_led_attr_group = { - .name = "wacom_led", - .attrs = cintiq_led_attrs, -}; - -static struct attribute *intuos4_led_attrs[] = { - &dev_attr_status0_luminance.attr, - &dev_attr_status1_luminance.attr, - &dev_attr_status_led0_select.attr, - &dev_attr_buttons_luminance.attr, - &dev_attr_button0_rawimg.attr, - &dev_attr_button1_rawimg.attr, - &dev_attr_button2_rawimg.attr, - &dev_attr_button3_rawimg.attr, - &dev_attr_button4_rawimg.attr, - &dev_attr_button5_rawimg.attr, - &dev_attr_button6_rawimg.attr, - &dev_attr_button7_rawimg.attr, - NULL -}; - -static struct attribute_group intuos4_led_attr_group = { - .name = "wacom_led", - .attrs = intuos4_led_attrs, -}; - -static struct attribute *intuos5_led_attrs[] = { - &dev_attr_status0_luminance.attr, - &dev_attr_status_led0_select.attr, - NULL -}; - -static struct attribute_group intuos5_led_attr_group = { - .name = "wacom_led", - .attrs = intuos5_led_attrs, -}; - -static int wacom_initialize_leds(struct wacom *wacom) -{ - int error; - - /* Initialize default values */ - switch (wacom->wacom_wac.features.type) { - case INTUOS4S: - case INTUOS4: - case INTUOS4L: - wacom->led.select[0] = 0; - wacom->led.select[1] = 0; - wacom->led.llv = 10; - wacom->led.hlv = 20; - wacom->led.img_lum = 10; - error = sysfs_create_group(&wacom->hdev->dev.kobj, - &intuos4_led_attr_group); - break; - - case WACOM_24HD: - case WACOM_21UX2: - wacom->led.select[0] = 0; - wacom->led.select[1] = 0; - wacom->led.llv = 0; - wacom->led.hlv = 0; - wacom->led.img_lum = 0; - - error = sysfs_create_group(&wacom->hdev->dev.kobj, - &cintiq_led_attr_group); - break; - - case INTUOS5S: - case INTUOS5: - case INTUOS5L: - case INTUOSPS: - case INTUOSPM: - case INTUOSPL: - if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) { - wacom->led.select[0] = 0; - wacom->led.select[1] = 0; - wacom->led.llv = 32; - wacom->led.hlv = 0; - wacom->led.img_lum = 0; - - error = sysfs_create_group(&wacom->hdev->dev.kobj, - &intuos5_led_attr_group); - } else - return 0; - break; - - default: - return 0; - } - - if (error) { - hid_err(wacom->hdev, - "cannot create sysfs group err: %d\n", error); - return error; - } - wacom_led_control(wacom); - - return 0; -} - -static void wacom_destroy_leds(struct wacom *wacom) -{ - switch (wacom->wacom_wac.features.type) { - case INTUOS4S: - case INTUOS4: - case INTUOS4L: - sysfs_remove_group(&wacom->hdev->dev.kobj, - &intuos4_led_attr_group); - break; - - case WACOM_24HD: - case WACOM_21UX2: - sysfs_remove_group(&wacom->hdev->dev.kobj, - &cintiq_led_attr_group); - break; - - case INTUOS5S: - case INTUOS5: - case INTUOS5L: - case INTUOSPS: - case INTUOSPM: - case INTUOSPL: - if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) - sysfs_remove_group(&wacom->hdev->dev.kobj, - &intuos5_led_attr_group); - break; - } -} - -static enum power_supply_property wacom_battery_props[] = { - POWER_SUPPLY_PROP_SCOPE, - POWER_SUPPLY_PROP_CAPACITY -}; - -static int wacom_battery_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct wacom *wacom = container_of(psy, struct wacom, battery); - int ret = 0; - - switch (psp) { - case POWER_SUPPLY_PROP_SCOPE: - val->intval = POWER_SUPPLY_SCOPE_DEVICE; - break; - case POWER_SUPPLY_PROP_CAPACITY: - val->intval = - wacom->wacom_wac.battery_capacity * 100 / 31; - break; - default: - ret = -EINVAL; - break; - } - - return ret; -} - -static int wacom_initialize_battery(struct wacom *wacom) -{ - int error = 0; - - if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) { - wacom->battery.properties = wacom_battery_props; - wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); - wacom->battery.get_property = wacom_battery_get_property; - wacom->battery.name = "wacom_battery"; - wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; - wacom->battery.use_for_apm = 0; - - error = power_supply_register(&wacom->hdev->dev, - &wacom->battery); - - if (!error) - power_supply_powers(&wacom->battery, - &wacom->hdev->dev); - } - - return error; -} - -static void wacom_destroy_battery(struct wacom *wacom) -{ - if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR && - wacom->battery.dev) { - power_supply_unregister(&wacom->battery); - wacom->battery.dev = NULL; - } -} - -static struct input_dev *wacom_allocate_input(struct wacom *wacom) -{ - struct input_dev *input_dev; - struct hid_device *hdev = wacom->hdev; - struct wacom_wac *wacom_wac = &(wacom->wacom_wac); - - input_dev = input_allocate_device(); - if (!input_dev) - return NULL; - - input_dev->name = wacom_wac->name; - input_dev->phys = hdev->phys; - input_dev->dev.parent = &hdev->dev; - input_dev->open = wacom_open; - input_dev->close = wacom_close; - input_dev->uniq = hdev->uniq; - input_dev->id.bustype = hdev->bus; - input_dev->id.vendor = hdev->vendor; - input_dev->id.product = hdev->product; - input_dev->id.version = hdev->version; - input_set_drvdata(input_dev, wacom); - - return input_dev; -} - -static void wacom_unregister_inputs(struct wacom *wacom) -{ - if (wacom->wacom_wac.input) - input_unregister_device(wacom->wacom_wac.input); - if (wacom->wacom_wac.pad_input) - input_unregister_device(wacom->wacom_wac.pad_input); - wacom->wacom_wac.input = NULL; - wacom->wacom_wac.pad_input = NULL; -} - -static int wacom_register_inputs(struct wacom *wacom) -{ - struct input_dev *input_dev, *pad_input_dev; - struct wacom_wac *wacom_wac = &(wacom->wacom_wac); - int error; - - input_dev = wacom_allocate_input(wacom); - pad_input_dev = wacom_allocate_input(wacom); - if (!input_dev || !pad_input_dev) { - error = -ENOMEM; - goto fail1; - } - - wacom_wac->input = input_dev; - wacom_wac->pad_input = pad_input_dev; - wacom_wac->pad_input->name = wacom_wac->pad_name; - - error = wacom_setup_input_capabilities(input_dev, wacom_wac); - if (error) - goto fail2; - - error = input_register_device(input_dev); - if (error) - goto fail2; - - error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac); - if (error) { - /* no pad in use on this interface */ - input_free_device(pad_input_dev); - wacom_wac->pad_input = NULL; - pad_input_dev = NULL; - } else { - error = input_register_device(pad_input_dev); - if (error) - goto fail3; - } - - return 0; - -fail3: - input_unregister_device(input_dev); - input_dev = NULL; -fail2: - wacom_wac->input = NULL; - wacom_wac->pad_input = NULL; -fail1: - if (input_dev) - input_free_device(input_dev); - if (pad_input_dev) - input_free_device(pad_input_dev); - return error; -} - -static void wacom_wireless_work(struct work_struct *work) -{ - struct wacom *wacom = container_of(work, struct wacom, work); - struct usb_device *usbdev = wacom->usbdev; - struct wacom_wac *wacom_wac = &wacom->wacom_wac; - struct hid_device *hdev1, *hdev2; - struct wacom *wacom1, *wacom2; - struct wacom_wac *wacom_wac1, *wacom_wac2; - int error; - - /* - * Regardless if this is a disconnect or a new tablet, - * remove any existing input and battery devices. - */ - - wacom_destroy_battery(wacom); - - /* Stylus interface */ - hdev1 = usb_get_intfdata(usbdev->config->interface[1]); - wacom1 = hid_get_drvdata(hdev1); - wacom_wac1 = &(wacom1->wacom_wac); - wacom_unregister_inputs(wacom1); - - /* Touch interface */ - hdev2 = usb_get_intfdata(usbdev->config->interface[2]); - wacom2 = hid_get_drvdata(hdev2); - wacom_wac2 = &(wacom2->wacom_wac); - wacom_unregister_inputs(wacom2); - - if (wacom_wac->pid == 0) { - hid_info(wacom->hdev, "wireless tablet disconnected\n"); - } else { - const struct hid_device_id *id = wacom_ids; - - hid_info(wacom->hdev, "wireless tablet connected with PID %x\n", - wacom_wac->pid); - - while (id->bus) { - if (id->vendor == USB_VENDOR_ID_WACOM && - id->product == wacom_wac->pid) - break; - id++; - } - - if (!id->bus) { - hid_info(wacom->hdev, "ignoring unknown PID.\n"); - return; - } - - /* Stylus interface */ - wacom_wac1->features = - *((struct wacom_features *)id->driver_data); - wacom_wac1->features.device_type = BTN_TOOL_PEN; - snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen", - wacom_wac1->features.name); - snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad", - wacom_wac1->features.name); - wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max; - wacom_wac1->shared->type = wacom_wac1->features.type; - error = wacom_register_inputs(wacom1); - if (error) - goto fail; - - /* Touch interface */ - if (wacom_wac1->features.touch_max || - wacom_wac1->features.type == INTUOSHT) { - wacom_wac2->features = - *((struct wacom_features *)id->driver_data); - wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; - wacom_wac2->features.device_type = BTN_TOOL_FINGER; - wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096; - if (wacom_wac2->features.touch_max) - snprintf(wacom_wac2->name, WACOM_NAME_MAX, - "%s (WL) Finger",wacom_wac2->features.name); - else - snprintf(wacom_wac2->name, WACOM_NAME_MAX, - "%s (WL) Pad",wacom_wac2->features.name); - snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX, - "%s (WL) Pad", wacom_wac2->features.name); - error = wacom_register_inputs(wacom2); - if (error) - goto fail; - - if (wacom_wac1->features.type == INTUOSHT && - wacom_wac1->features.touch_max) - wacom_wac->shared->touch_input = wacom_wac2->input; - } - - error = wacom_initialize_battery(wacom); - if (error) - goto fail; - } - - return; - -fail: - wacom_unregister_inputs(wacom1); - wacom_unregister_inputs(wacom2); - return; -} - -/* - * Not all devices report physical dimensions from HID. - * Compute the default from hardcoded logical dimension - * and resolution before driver overwrites them. - */ -static void wacom_set_default_phy(struct wacom_features *features) -{ - if (features->x_resolution) { - features->x_phy = (features->x_max * 100) / - features->x_resolution; - features->y_phy = (features->y_max * 100) / - features->y_resolution; - } -} - -static void wacom_calculate_res(struct wacom_features *features) -{ - features->x_resolution = wacom_calc_hid_res(features->x_max, - features->x_phy, - features->unit, - features->unitExpo); - features->y_resolution = wacom_calc_hid_res(features->y_max, - features->y_phy, - features->unit, - features->unitExpo); -} - -static int wacom_hid_report_len(struct hid_report *report) -{ - /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ - return ((report->size - 1) >> 3) + 1 + (report->id > 0); -} - -static size_t wacom_compute_pktlen(struct hid_device *hdev) -{ - struct hid_report_enum *report_enum; - struct hid_report *report; - size_t size = 0; - - report_enum = hdev->report_enum + HID_INPUT_REPORT; - - list_for_each_entry(report, &report_enum->report_list, list) { - size_t report_size = wacom_hid_report_len(report); - if (report_size > size) - size = report_size; - } - - return size; -} - -static int wacom_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - struct usb_interface *intf = to_usb_interface(hdev->dev.parent); - struct usb_device *dev = interface_to_usbdev(intf); - struct wacom *wacom; - struct wacom_wac *wacom_wac; - struct wacom_features *features; - int error; - - if (!id->driver_data) - return -EINVAL; - - wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); - if (!wacom) - return -ENOMEM; - - hid_set_drvdata(hdev, wacom); - wacom->hdev = hdev; - - /* ask for the report descriptor to be loaded by HID */ - error = hid_parse(hdev); - if (error) { - hid_err(hdev, "parse failed\n"); - goto fail1; - } - - wacom_wac = &wacom->wacom_wac; - wacom_wac->features = *((struct wacom_features *)id->driver_data); - features = &wacom_wac->features; - features->pktlen = wacom_compute_pktlen(hdev); - if (features->pktlen > WACOM_PKGLEN_MAX) { - error = -EINVAL; - goto fail1; - } - - if (features->check_for_hid_type && features->hid_type != hdev->type) { - error = -ENODEV; - goto fail1; - } - - wacom->usbdev = dev; - wacom->intf = intf; - mutex_init(&wacom->lock); - INIT_WORK(&wacom->work, wacom_wireless_work); - - /* set the default size in case we do not get them from hid */ - wacom_set_default_phy(features); - - /* Retrieve the physical and logical size for touch devices */ - wacom_retrieve_hid_descriptor(hdev, features); - - /* - * Intuos5 has no useful data about its touch interface in its - * HID descriptor. If this is the touch interface (PacketSize - * of WACOM_PKGLEN_BBTOUCH3), override the table values. - */ - if (features->type >= INTUOS5S && features->type <= INTUOSHT) { - if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { - features->device_type = BTN_TOOL_FINGER; - - features->x_max = 4096; - features->y_max = 4096; - } else { - features->device_type = BTN_TOOL_PEN; - } - } - - /* - * Same thing for Bamboo 3rd gen. - */ - if ((features->type == BAMBOO_PT) && - (features->pktlen == WACOM_PKGLEN_BBTOUCH3) && - (features->device_type == BTN_TOOL_PEN)) { - features->device_type = BTN_TOOL_FINGER; - - features->x_max = 4096; - features->y_max = 4096; - } - - wacom_setup_device_quirks(features); - - /* set unit to "100th of a mm" for devices not reported by HID */ - if (!features->unit) { - features->unit = 0x11; - features->unitExpo = -3; - } - wacom_calculate_res(features); - - strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); - snprintf(wacom_wac->pad_name, sizeof(wacom_wac->pad_name), - "%s Pad", features->name); - - if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { - /* Append the device type to the name */ - if (features->device_type != BTN_TOOL_FINGER) - strlcat(wacom_wac->name, " Pen", WACOM_NAME_MAX); - else if (features->touch_max) - strlcat(wacom_wac->name, " Finger", WACOM_NAME_MAX); - else - strlcat(wacom_wac->name, " Pad", WACOM_NAME_MAX); - - error = wacom_add_shared_data(hdev); - if (error) - goto fail1; - } - - error = wacom_initialize_leds(wacom); - if (error) - goto fail2; - - if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { - error = wacom_register_inputs(wacom); - if (error) - goto fail3; - } - - /* Note that if query fails it is not a hard failure */ - wacom_query_tablet_data(hdev, features); - - /* Regular HID work starts now */ - error = hid_hw_start(hdev, HID_CONNECT_HIDRAW); - if (error) { - hid_err(hdev, "hw start failed\n"); - goto fail4; - } - - if (features->quirks & WACOM_QUIRK_MONITOR) - error = hid_hw_open(hdev); - - if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) { - if (wacom_wac->features.device_type == BTN_TOOL_FINGER) - wacom_wac->shared->touch_input = wacom_wac->input; - } - - return 0; - - fail4: wacom_unregister_inputs(wacom); - fail3: wacom_destroy_leds(wacom); - fail2: wacom_remove_shared_data(wacom_wac); - fail1: kfree(wacom); - hid_set_drvdata(hdev, NULL); - return error; -} - -static void wacom_remove(struct hid_device *hdev) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - - hid_hw_stop(hdev); - - cancel_work_sync(&wacom->work); - wacom_unregister_inputs(wacom); - wacom_destroy_battery(wacom); - wacom_destroy_leds(wacom); - wacom_remove_shared_data(&wacom->wacom_wac); - - hid_set_drvdata(hdev, NULL); - kfree(wacom); -} - -static int wacom_resume(struct hid_device *hdev) -{ - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_features *features = &wacom->wacom_wac.features; - - mutex_lock(&wacom->lock); - - /* switch to wacom mode first */ - wacom_query_tablet_data(hdev, features); - wacom_led_control(wacom); - - mutex_unlock(&wacom->lock); - - return 0; -} - -static int wacom_reset_resume(struct hid_device *hdev) -{ - return wacom_resume(hdev); -} - -static struct hid_driver wacom_driver = { - .name = "wacom", - .id_table = wacom_ids, - .probe = wacom_probe, - .remove = wacom_remove, -#ifdef CONFIG_PM - .resume = wacom_resume, - .reset_resume = wacom_reset_resume, -#endif - .raw_event = wacom_raw_event, -}; -module_hid_driver(wacom_driver); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c deleted file mode 100644 index cd91521..0000000 --- a/drivers/input/tablet/wacom_wac.c +++ /dev/null @@ -1,2548 +0,0 @@ -/* - * drivers/input/tablet/wacom_wac.c - * - * USB Wacom tablet support - Wacom specific code - * - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include "wacom_wac.h" -#include "wacom.h" -#include -#include - -/* resolution for penabled devices */ -#define WACOM_PL_RES 20 -#define WACOM_PENPRTN_RES 40 -#define WACOM_VOLITO_RES 50 -#define WACOM_GRAPHIRE_RES 80 -#define WACOM_INTUOS_RES 100 -#define WACOM_INTUOS3_RES 200 - -/* Scale factor relating reported contact size to logical contact area. - * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo - */ -#define WACOM_CONTACT_AREA_SCALE 2607 - -static int wacom_penpartner_irq(struct wacom_wac *wacom) -{ - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - - switch (data[0]) { - case 1: - if (data[5] & 0x80) { - wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; - input_report_key(input, wacom->tool[0], 1); - input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ - input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); - input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); - input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); - input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127)); - input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); - } else { - input_report_key(input, wacom->tool[0], 0); - input_report_abs(input, ABS_MISC, 0); /* report tool id */ - input_report_abs(input, ABS_PRESSURE, -1); - input_report_key(input, BTN_TOUCH, 0); - } - break; - - case 2: - input_report_key(input, BTN_TOOL_PEN, 1); - input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ - input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); - input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); - input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); - input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); - input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); - break; - - default: - dev_dbg(input->dev.parent, - "%s: received unknown report #%d\n", __func__, data[0]); - return 0; - } - - return 1; -} - -static int wacom_pl_irq(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - int prox, pressure; - - if (data[0] != WACOM_REPORT_PENABLED) { - dev_dbg(input->dev.parent, - "%s: received unknown report #%d\n", __func__, data[0]); - return 0; - } - - prox = data[1] & 0x40; - - if (prox) { - wacom->id[0] = ERASER_DEVICE_ID; - pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); - if (features->pressure_max > 255) - pressure = (pressure << 1) | ((data[4] >> 6) & 1); - pressure += (features->pressure_max + 1) / 2; - - /* - * if going from out of proximity into proximity select between the eraser - * and the pen based on the state of the stylus2 button, choose eraser if - * pressed else choose pen. if not a proximity change from out to in, send - * an out of proximity for previous tool then a in for new tool. - */ - if (!wacom->tool[0]) { - /* Eraser bit set for DTF */ - if (data[1] & 0x10) - wacom->tool[1] = BTN_TOOL_RUBBER; - else - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - } else { - /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { - /* report out proximity for previous tool */ - input_report_key(input, wacom->tool[1], 0); - input_sync(input); - wacom->tool[1] = BTN_TOOL_PEN; - return 0; - } - } - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - wacom->id[0] = STYLUS_DEVICE_ID; - } - input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */ - input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ - input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); - input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); - input_report_abs(input, ABS_PRESSURE, pressure); - - input_report_key(input, BTN_TOUCH, data[4] & 0x08); - input_report_key(input, BTN_STYLUS, data[4] & 0x10); - /* Only allow the stylus2 button to be reported for the pen tool. */ - input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); - } else { - /* report proximity-out of a (valid) tool */ - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - } - input_report_key(input, wacom->tool[1], prox); - } - - wacom->tool[0] = prox; /* Save proximity state */ - return 1; -} - -static int wacom_ptu_irq(struct wacom_wac *wacom) -{ - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - - if (data[0] != WACOM_REPORT_PENABLED) { - dev_dbg(input->dev.parent, - "%s: received unknown report #%d\n", __func__, data[0]); - return 0; - } - - if (data[1] & 0x04) { - input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20); - input_report_key(input, BTN_TOUCH, data[1] & 0x08); - wacom->id[0] = ERASER_DEVICE_ID; - } else { - input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20); - input_report_key(input, BTN_TOUCH, data[1] & 0x01); - wacom->id[0] = STYLUS_DEVICE_ID; - } - input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6])); - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, data[1] & 0x10); - return 1; -} - -static int wacom_dtu_irq(struct wacom_wac *wacom) -{ - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - int prox = data[1] & 0x20; - - dev_dbg(input->dev.parent, - "%s: received report #%d", __func__, data[0]); - - if (prox) { - /* Going into proximity select tool */ - wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - if (wacom->tool[0] == BTN_TOOL_PEN) - wacom->id[0] = STYLUS_DEVICE_ID; - else - wacom->id[0] = ERASER_DEVICE_ID; - } - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, data[1] & 0x10); - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); - input_report_key(input, BTN_TOUCH, data[1] & 0x05); - if (!prox) /* out-prox */ - wacom->id[0] = 0; - input_report_key(input, wacom->tool[0], prox); - input_report_abs(input, ABS_MISC, wacom->id[0]); - return 1; -} - -static int wacom_dtus_irq(struct wacom_wac *wacom) -{ - char *data = wacom->data; - struct input_dev *input = wacom->input; - unsigned short prox, pressure = 0; - - if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) { - dev_dbg(input->dev.parent, - "%s: received unknown report #%d", __func__, data[0]); - return 0; - } else if (data[0] == WACOM_REPORT_DTUSPAD) { - input = wacom->pad_input; - input_report_key(input, BTN_0, (data[1] & 0x01)); - input_report_key(input, BTN_1, (data[1] & 0x02)); - input_report_key(input, BTN_2, (data[1] & 0x04)); - input_report_key(input, BTN_3, (data[1] & 0x08)); - input_report_abs(input, ABS_MISC, - data[1] & 0x0f ? PAD_DEVICE_ID : 0); - return 1; - } else { - prox = data[1] & 0x80; - if (prox) { - switch ((data[1] >> 3) & 3) { - case 1: /* Rubber */ - wacom->tool[0] = BTN_TOOL_RUBBER; - wacom->id[0] = ERASER_DEVICE_ID; - break; - - case 2: /* Pen */ - wacom->tool[0] = BTN_TOOL_PEN; - wacom->id[0] = STYLUS_DEVICE_ID; - break; - } - } - - input_report_key(input, BTN_STYLUS, data[1] & 0x20); - input_report_key(input, BTN_STYLUS2, data[1] & 0x40); - input_report_abs(input, ABS_X, get_unaligned_be16(&data[3])); - input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5])); - pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff); - input_report_abs(input, ABS_PRESSURE, pressure); - input_report_key(input, BTN_TOUCH, pressure > 10); - - if (!prox) /* out-prox */ - wacom->id[0] = 0; - input_report_key(input, wacom->tool[0], prox); - input_report_abs(input, ABS_MISC, wacom->id[0]); - return 1; - } -} - -static int wacom_graphire_irq(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - struct input_dev *pad_input = wacom->pad_input; - int prox; - int rw = 0; - int retval = 0; - - if (data[0] != WACOM_REPORT_PENABLED) { - dev_dbg(input->dev.parent, - "%s: received unknown report #%d\n", __func__, data[0]); - goto exit; - } - - prox = data[1] & 0x80; - if (prox || wacom->id[0]) { - if (prox) { - switch ((data[1] >> 5) & 3) { - - case 0: /* Pen */ - wacom->tool[0] = BTN_TOOL_PEN; - wacom->id[0] = STYLUS_DEVICE_ID; - break; - - case 1: /* Rubber */ - wacom->tool[0] = BTN_TOOL_RUBBER; - wacom->id[0] = ERASER_DEVICE_ID; - break; - - case 2: /* Mouse with wheel */ - input_report_key(input, BTN_MIDDLE, data[1] & 0x04); - /* fall through */ - - case 3: /* Mouse without wheel */ - wacom->tool[0] = BTN_TOOL_MOUSE; - wacom->id[0] = CURSOR_DEVICE_ID; - break; - } - } - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); - input_report_key(input, BTN_TOUCH, data[1] & 0x01); - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, data[1] & 0x04); - } else { - input_report_key(input, BTN_LEFT, data[1] & 0x01); - input_report_key(input, BTN_RIGHT, data[1] & 0x02); - if (features->type == WACOM_G4 || - features->type == WACOM_MO) { - input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); - rw = (data[7] & 0x04) - (data[7] & 0x03); - } else { - input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); - rw = -(signed char)data[6]; - } - input_report_rel(input, REL_WHEEL, rw); - } - - if (!prox) - wacom->id[0] = 0; - input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ - input_report_key(input, wacom->tool[0], prox); - input_sync(input); /* sync last event */ - } - - /* send pad data */ - switch (features->type) { - case WACOM_G4: - prox = data[7] & 0xf8; - if (prox || wacom->id[1]) { - wacom->id[1] = PAD_DEVICE_ID; - input_report_key(pad_input, BTN_BACK, (data[7] & 0x40)); - input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80)); - rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); - input_report_rel(pad_input, REL_WHEEL, rw); - if (!prox) - wacom->id[1] = 0; - input_report_abs(pad_input, ABS_MISC, wacom->id[1]); - retval = 1; - } - break; - - case WACOM_MO: - prox = (data[7] & 0xf8) || data[8]; - if (prox || wacom->id[1]) { - wacom->id[1] = PAD_DEVICE_ID; - input_report_key(pad_input, BTN_BACK, (data[7] & 0x08)); - input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20)); - input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10)); - input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40)); - input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f)); - if (!prox) - wacom->id[1] = 0; - input_report_abs(pad_input, ABS_MISC, wacom->id[1]); - retval = 1; - } - break; - } -exit: - return retval; -} - -static int wacom_intuos_inout(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - int idx = 0; - - /* tool number */ - if (features->type == INTUOS) - idx = data[1] & 0x01; - - /* Enter report */ - if ((data[1] & 0xfc) == 0xc0) { - if (features->quirks & WACOM_QUIRK_MULTI_INPUT) - wacom->shared->stylus_in_proximity = true; - - /* serial number of the tool */ - wacom->serial[idx] = ((data[3] & 0x0f) << 28) + - (data[4] << 20) + (data[5] << 12) + - (data[6] << 4) + (data[7] >> 4); - - wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | - ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); - - switch (wacom->id[idx]) { - case 0x812: /* Inking pen */ - case 0x801: /* Intuos3 Inking pen */ - case 0x120802: /* Intuos4/5 Inking Pen */ - case 0x012: - wacom->tool[idx] = BTN_TOOL_PENCIL; - break; - - case 0x822: /* Pen */ - case 0x842: - case 0x852: - case 0x823: /* Intuos3 Grip Pen */ - case 0x813: /* Intuos3 Classic Pen */ - case 0x885: /* Intuos3 Marker Pen */ - case 0x802: /* Intuos4/5 13HD/24HD General Pen */ - case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */ - case 0x022: - case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ - case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ - case 0x160802: /* Cintiq 13HD Pro Pen */ - case 0x180802: /* DTH2242 Pen */ - case 0x100802: /* Intuos4/5 13HD/24HD General Pen */ - wacom->tool[idx] = BTN_TOOL_PEN; - break; - - case 0x832: /* Stroke pen */ - case 0x032: - wacom->tool[idx] = BTN_TOOL_BRUSH; - break; - - case 0x007: /* Mouse 4D and 2D */ - case 0x09c: - case 0x094: - case 0x017: /* Intuos3 2D Mouse */ - case 0x806: /* Intuos4 Mouse */ - wacom->tool[idx] = BTN_TOOL_MOUSE; - break; - - case 0x096: /* Lens cursor */ - case 0x097: /* Intuos3 Lens cursor */ - case 0x006: /* Intuos4 Lens cursor */ - wacom->tool[idx] = BTN_TOOL_LENS; - break; - - case 0x82a: /* Eraser */ - case 0x85a: - case 0x91a: - case 0xd1a: - case 0x0fa: - case 0x82b: /* Intuos3 Grip Pen Eraser */ - case 0x81b: /* Intuos3 Classic Pen Eraser */ - case 0x91b: /* Intuos3 Airbrush Eraser */ - case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */ - case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */ - case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ - case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */ - case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ - case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ - case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ - case 0x18080a: /* DTH2242 Eraser */ - case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */ - wacom->tool[idx] = BTN_TOOL_RUBBER; - break; - - case 0xd12: - case 0x912: - case 0x112: - case 0x913: /* Intuos3 Airbrush */ - case 0x902: /* Intuos4/5 13HD/24HD Airbrush */ - case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */ - wacom->tool[idx] = BTN_TOOL_AIRBRUSH; - break; - - default: /* Unknown tool */ - wacom->tool[idx] = BTN_TOOL_PEN; - break; - } - return 1; - } - - /* older I4 styli don't work with new Cintiqs */ - if (!((wacom->id[idx] >> 20) & 0x01) && - (features->type == WACOM_21UX2)) - return 1; - - /* Range Report */ - if ((data[1] & 0xfe) == 0x20) { - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max); - if (features->quirks & WACOM_QUIRK_MULTI_INPUT) - wacom->shared->stylus_in_proximity = true; - } - - /* Exit report */ - if ((data[1] & 0xfe) == 0x80) { - if (features->quirks & WACOM_QUIRK_MULTI_INPUT) - wacom->shared->stylus_in_proximity = false; - - /* - * Reset all states otherwise we lose the initial states - * when in-prox next time - */ - input_report_abs(input, ABS_X, 0); - input_report_abs(input, ABS_Y, 0); - input_report_abs(input, ABS_DISTANCE, 0); - input_report_abs(input, ABS_TILT_X, 0); - input_report_abs(input, ABS_TILT_Y, 0); - if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { - input_report_key(input, BTN_LEFT, 0); - input_report_key(input, BTN_MIDDLE, 0); - input_report_key(input, BTN_RIGHT, 0); - input_report_key(input, BTN_SIDE, 0); - input_report_key(input, BTN_EXTRA, 0); - input_report_abs(input, ABS_THROTTLE, 0); - input_report_abs(input, ABS_RZ, 0); - } else { - input_report_abs(input, ABS_PRESSURE, 0); - input_report_key(input, BTN_STYLUS, 0); - input_report_key(input, BTN_STYLUS2, 0); - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_WHEEL, 0); - if (features->type >= INTUOS3S) - input_report_abs(input, ABS_Z, 0); - } - input_report_key(input, wacom->tool[idx], 0); - input_report_abs(input, ABS_MISC, 0); /* reset tool id */ - input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - wacom->id[idx] = 0; - return 2; - } - return 0; -} - -static void wacom_intuos_general(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - unsigned int t; - - /* general pen packet */ - if ((data[1] & 0xb8) == 0xa0) { - t = (data[6] << 2) | ((data[7] >> 6) & 3); - if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) { - t = (t << 1) | (data[1] & 1); - } - input_report_abs(input, ABS_PRESSURE, t); - input_report_abs(input, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); - input_report_key(input, BTN_STYLUS, data[1] & 2); - input_report_key(input, BTN_STYLUS2, data[1] & 4); - input_report_key(input, BTN_TOUCH, t > 10); - } - - /* airbrush second packet */ - if ((data[1] & 0xbc) == 0xb4) { - input_report_abs(input, ABS_WHEEL, - (data[6] << 2) | ((data[7] >> 6) & 3)); - input_report_abs(input, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); - } -} - -static int wacom_intuos_irq(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - unsigned int t; - int idx = 0, result; - - if (data[0] != WACOM_REPORT_PENABLED && - data[0] != WACOM_REPORT_INTUOSREAD && - data[0] != WACOM_REPORT_INTUOSWRITE && - data[0] != WACOM_REPORT_INTUOSPAD && - data[0] != WACOM_REPORT_INTUOS5PAD) { - dev_dbg(input->dev.parent, - "%s: received unknown report #%d\n", __func__, data[0]); - return 0; - } - - /* tool number */ - if (features->type == INTUOS) - idx = data[1] & 0x01; - - /* pad packets. Works as a second tool and is always in prox */ - if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) { - input = wacom->pad_input; - if (features->type >= INTUOS4S && features->type <= INTUOS4L) { - input_report_key(input, BTN_0, (data[2] & 0x01)); - input_report_key(input, BTN_1, (data[3] & 0x01)); - input_report_key(input, BTN_2, (data[3] & 0x02)); - input_report_key(input, BTN_3, (data[3] & 0x04)); - input_report_key(input, BTN_4, (data[3] & 0x08)); - input_report_key(input, BTN_5, (data[3] & 0x10)); - input_report_key(input, BTN_6, (data[3] & 0x20)); - if (data[1] & 0x80) { - input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); - } else { - /* Out of proximity, clear wheel value. */ - input_report_abs(input, ABS_WHEEL, 0); - } - if (features->type != INTUOS4S) { - input_report_key(input, BTN_7, (data[3] & 0x40)); - input_report_key(input, BTN_8, (data[3] & 0x80)); - } - if (data[1] | (data[2] & 0x01) | data[3]) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } else if (features->type == DTK) { - input_report_key(input, BTN_0, (data[6] & 0x01)); - input_report_key(input, BTN_1, (data[6] & 0x02)); - input_report_key(input, BTN_2, (data[6] & 0x04)); - input_report_key(input, BTN_3, (data[6] & 0x08)); - input_report_key(input, BTN_4, (data[6] & 0x10)); - input_report_key(input, BTN_5, (data[6] & 0x20)); - if (data[6] & 0x3f) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } else if (features->type == WACOM_13HD) { - input_report_key(input, BTN_0, (data[3] & 0x01)); - input_report_key(input, BTN_1, (data[4] & 0x01)); - input_report_key(input, BTN_2, (data[4] & 0x02)); - input_report_key(input, BTN_3, (data[4] & 0x04)); - input_report_key(input, BTN_4, (data[4] & 0x08)); - input_report_key(input, BTN_5, (data[4] & 0x10)); - input_report_key(input, BTN_6, (data[4] & 0x20)); - input_report_key(input, BTN_7, (data[4] & 0x40)); - input_report_key(input, BTN_8, (data[4] & 0x80)); - if ((data[3] & 0x01) | data[4]) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } else if (features->type == WACOM_24HD) { - input_report_key(input, BTN_0, (data[6] & 0x01)); - input_report_key(input, BTN_1, (data[6] & 0x02)); - input_report_key(input, BTN_2, (data[6] & 0x04)); - input_report_key(input, BTN_3, (data[6] & 0x08)); - input_report_key(input, BTN_4, (data[6] & 0x10)); - input_report_key(input, BTN_5, (data[6] & 0x20)); - input_report_key(input, BTN_6, (data[6] & 0x40)); - input_report_key(input, BTN_7, (data[6] & 0x80)); - input_report_key(input, BTN_8, (data[8] & 0x01)); - input_report_key(input, BTN_9, (data[8] & 0x02)); - input_report_key(input, BTN_A, (data[8] & 0x04)); - input_report_key(input, BTN_B, (data[8] & 0x08)); - input_report_key(input, BTN_C, (data[8] & 0x10)); - input_report_key(input, BTN_X, (data[8] & 0x20)); - input_report_key(input, BTN_Y, (data[8] & 0x40)); - input_report_key(input, BTN_Z, (data[8] & 0x80)); - - /* - * Three "buttons" are available on the 24HD which are - * physically implemented as a touchstrip. Each button - * is approximately 3 bits wide with a 2 bit spacing. - * The raw touchstrip bits are stored at: - * ((data[3] & 0x1f) << 8) | data[4]) - */ - input_report_key(input, KEY_PROG1, data[4] & 0x07); - input_report_key(input, KEY_PROG2, data[4] & 0xE0); - input_report_key(input, KEY_PROG3, data[3] & 0x1C); - - if (data[1] & 0x80) { - input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); - } else { - /* Out of proximity, clear wheel value. */ - input_report_abs(input, ABS_WHEEL, 0); - } - - if (data[2] & 0x80) { - input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f)); - } else { - /* Out of proximity, clear second wheel value. */ - input_report_abs(input, ABS_THROTTLE, 0); - } - - if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } else if (features->type == CINTIQ_HYBRID) { - /* - * Do not send hardware buttons under Android. They - * are already sent to the system through GPIO (and - * have different meaning). - */ - input_report_key(input, BTN_1, (data[4] & 0x01)); - input_report_key(input, BTN_2, (data[4] & 0x02)); - input_report_key(input, BTN_3, (data[4] & 0x04)); - input_report_key(input, BTN_4, (data[4] & 0x08)); - - input_report_key(input, BTN_5, (data[4] & 0x10)); /* Right */ - input_report_key(input, BTN_6, (data[4] & 0x20)); /* Up */ - input_report_key(input, BTN_7, (data[4] & 0x40)); /* Left */ - input_report_key(input, BTN_8, (data[4] & 0x80)); /* Down */ - input_report_key(input, BTN_0, (data[3] & 0x01)); /* Center */ - } else if (features->type >= INTUOS5S && features->type <= INTUOSPL) { - int i; - - /* Touch ring mode switch has no capacitive sensor */ - input_report_key(input, BTN_0, (data[3] & 0x01)); - - /* - * ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in - * addition to the mechanical switch. Switch data is - * stored in data[4], capacitive data in data[5]. - */ - for (i = 0; i < 8; i++) - input_report_key(input, BTN_1 + i, data[4] & (1 << i)); - - if (data[2] & 0x80) { - input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f)); - } else { - /* Out of proximity, clear wheel value. */ - input_report_abs(input, ABS_WHEEL, 0); - } - - if (data[2] | (data[3] & 0x01) | data[4] | data[5]) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } else { - if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) { - input_report_key(input, BTN_0, (data[5] & 0x01)); - input_report_key(input, BTN_1, (data[6] & 0x01)); - input_report_key(input, BTN_2, (data[6] & 0x02)); - input_report_key(input, BTN_3, (data[6] & 0x04)); - input_report_key(input, BTN_4, (data[6] & 0x08)); - input_report_key(input, BTN_5, (data[6] & 0x10)); - input_report_key(input, BTN_6, (data[6] & 0x20)); - input_report_key(input, BTN_7, (data[6] & 0x40)); - input_report_key(input, BTN_8, (data[6] & 0x80)); - input_report_key(input, BTN_9, (data[7] & 0x01)); - input_report_key(input, BTN_A, (data[8] & 0x01)); - input_report_key(input, BTN_B, (data[8] & 0x02)); - input_report_key(input, BTN_C, (data[8] & 0x04)); - input_report_key(input, BTN_X, (data[8] & 0x08)); - input_report_key(input, BTN_Y, (data[8] & 0x10)); - input_report_key(input, BTN_Z, (data[8] & 0x20)); - input_report_key(input, BTN_BASE, (data[8] & 0x40)); - input_report_key(input, BTN_BASE2, (data[8] & 0x80)); - - if (features->type == WACOM_22HD) { - input_report_key(input, KEY_PROG1, data[9] & 0x01); - input_report_key(input, KEY_PROG2, data[9] & 0x02); - input_report_key(input, KEY_PROG3, data[9] & 0x04); - } - } else { - input_report_key(input, BTN_0, (data[5] & 0x01)); - input_report_key(input, BTN_1, (data[5] & 0x02)); - input_report_key(input, BTN_2, (data[5] & 0x04)); - input_report_key(input, BTN_3, (data[5] & 0x08)); - input_report_key(input, BTN_4, (data[6] & 0x01)); - input_report_key(input, BTN_5, (data[6] & 0x02)); - input_report_key(input, BTN_6, (data[6] & 0x04)); - input_report_key(input, BTN_7, (data[6] & 0x08)); - input_report_key(input, BTN_8, (data[5] & 0x10)); - input_report_key(input, BTN_9, (data[6] & 0x10)); - } - input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); - input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); - - if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | - data[2] | (data[3] & 0x1f) | data[4] | data[8] | - (data[7] & 0x01)) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - } else { - input_report_abs(input, ABS_MISC, 0); - } - } - return 1; - } - - /* process in/out prox events */ - result = wacom_intuos_inout(wacom); - if (result) - return result - 1; - - /* don't proceed if we don't know the ID */ - if (!wacom->id[idx]) - return 0; - - /* Only large Intuos support Lense Cursor */ - if (wacom->tool[idx] == BTN_TOOL_LENS && - (features->type == INTUOS3 || - features->type == INTUOS3S || - features->type == INTUOS4 || - features->type == INTUOS4S || - features->type == INTUOS5 || - features->type == INTUOS5S || - features->type == INTUOSPM || - features->type == INTUOSPS)) { - - return 0; - } - - /* Cintiq doesn't send data when RDY bit isn't set */ - if (features->type == CINTIQ && !(data[1] & 0x40)) - return 0; - - if (features->type >= INTUOS3S) { - input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); - input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); - input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); - } else { - input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2])); - input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4])); - input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); - } - - /* process general packets */ - wacom_intuos_general(wacom); - - /* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */ - if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) { - - if (data[1] & 0x02) { - /* Rotation packet */ - if (features->type >= INTUOS3S) { - /* I3 marker pen rotation */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : - ((t-1) / 2 + 450)) : (450 - t / 2) ; - input_report_abs(input, ABS_Z, t); - } else { - /* 4D mouse rotation packet */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - input_report_abs(input, ABS_RZ, (data[7] & 0x20) ? - ((t - 1) / 2) : -t / 2); - } - - } else if (!(data[1] & 0x10) && features->type < INTUOS3S) { - /* 4D mouse packet */ - input_report_key(input, BTN_LEFT, data[8] & 0x01); - input_report_key(input, BTN_MIDDLE, data[8] & 0x02); - input_report_key(input, BTN_RIGHT, data[8] & 0x04); - - input_report_key(input, BTN_SIDE, data[8] & 0x20); - input_report_key(input, BTN_EXTRA, data[8] & 0x10); - t = (data[6] << 2) | ((data[7] >> 6) & 3); - input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); - - } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { - /* I4 mouse */ - if (features->type >= INTUOS4S && features->type <= INTUOSPL) { - input_report_key(input, BTN_LEFT, data[6] & 0x01); - input_report_key(input, BTN_MIDDLE, data[6] & 0x02); - input_report_key(input, BTN_RIGHT, data[6] & 0x04); - input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7) - - ((data[7] & 0x40) >> 6)); - input_report_key(input, BTN_SIDE, data[6] & 0x08); - input_report_key(input, BTN_EXTRA, data[6] & 0x10); - - input_report_abs(input, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f); - } else { - /* 2D mouse packet */ - input_report_key(input, BTN_LEFT, data[8] & 0x04); - input_report_key(input, BTN_MIDDLE, data[8] & 0x08); - input_report_key(input, BTN_RIGHT, data[8] & 0x10); - input_report_rel(input, REL_WHEEL, (data[8] & 0x01) - - ((data[8] & 0x02) >> 1)); - - /* I3 2D mouse side buttons */ - if (features->type >= INTUOS3S && features->type <= INTUOS3L) { - input_report_key(input, BTN_SIDE, data[8] & 0x40); - input_report_key(input, BTN_EXTRA, data[8] & 0x20); - } - } - } else if ((features->type < INTUOS3S || features->type == INTUOS3L || - features->type == INTUOS4L || features->type == INTUOS5L || - features->type == INTUOSPL) && - wacom->tool[idx] == BTN_TOOL_LENS) { - /* Lens cursor packets */ - input_report_key(input, BTN_LEFT, data[8] & 0x01); - input_report_key(input, BTN_MIDDLE, data[8] & 0x02); - input_report_key(input, BTN_RIGHT, data[8] & 0x04); - input_report_key(input, BTN_SIDE, data[8] & 0x10); - input_report_key(input, BTN_EXTRA, data[8] & 0x08); - } - } - - input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */ - input_report_key(input, wacom->tool[idx], 1); - input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - return 1; -} - -static int int_dist(int x1, int y1, int x2, int y2) -{ - int x = x2 - x1; - int y = y2 - y1; - - return int_sqrt(x*x + y*y); -} - -static int wacom_24hdt_irq(struct wacom_wac *wacom) -{ - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int i; - int current_num_contacts = data[61]; - int contacts_to_send = 0; - - /* - * First packet resets the counter since only the first - * packet in series will have non-zero current_num_contacts. - */ - if (current_num_contacts) - wacom->num_contacts_left = current_num_contacts; - - /* There are at most 4 contacts per packet */ - contacts_to_send = min(4, wacom->num_contacts_left); - - for (i = 0; i < contacts_to_send; i++) { - int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1; - bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity; - int slot = input_mt_get_slot_by_key(input, data[offset + 1]); - - if (slot < 0) - continue; - input_mt_slot(input, slot); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - - if (touch) { - int t_x = get_unaligned_le16(&data[offset + 2]); - int c_x = get_unaligned_le16(&data[offset + 4]); - int t_y = get_unaligned_le16(&data[offset + 6]); - int c_y = get_unaligned_le16(&data[offset + 8]); - int w = get_unaligned_le16(&data[offset + 10]); - int h = get_unaligned_le16(&data[offset + 12]); - - input_report_abs(input, ABS_MT_POSITION_X, t_x); - input_report_abs(input, ABS_MT_POSITION_Y, t_y); - input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h)); - input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y)); - input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h)); - input_report_abs(input, ABS_MT_ORIENTATION, w > h); - } - } - input_mt_report_pointer_emulation(input, true); - - wacom->num_contacts_left -= contacts_to_send; - if (wacom->num_contacts_left <= 0) - wacom->num_contacts_left = 0; - - return 1; -} - -static int wacom_mt_touch(struct wacom_wac *wacom) -{ - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int i; - int current_num_contacts = data[2]; - int contacts_to_send = 0; - int x_offset = 0; - - /* MTTPC does not support Height and Width */ - if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B) - x_offset = -4; - - /* - * First packet resets the counter since only the first - * packet in series will have non-zero current_num_contacts. - */ - if (current_num_contacts) - wacom->num_contacts_left = current_num_contacts; - - /* There are at most 5 contacts per packet */ - contacts_to_send = min(5, wacom->num_contacts_left); - - for (i = 0; i < contacts_to_send; i++) { - int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3; - bool touch = data[offset] & 0x1; - int id = get_unaligned_le16(&data[offset + 1]); - int slot = input_mt_get_slot_by_key(input, id); - - if (slot < 0) - continue; - - input_mt_slot(input, slot); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - if (touch) { - int x = get_unaligned_le16(&data[offset + x_offset + 7]); - int y = get_unaligned_le16(&data[offset + x_offset + 9]); - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); - } - } - input_mt_report_pointer_emulation(input, true); - - wacom->num_contacts_left -= contacts_to_send; - if (wacom->num_contacts_left < 0) - wacom->num_contacts_left = 0; - - return 1; -} - -static int wacom_tpc_mt_touch(struct wacom_wac *wacom) -{ - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int contact_with_no_pen_down_count = 0; - int i; - - for (i = 0; i < 2; i++) { - int p = data[1] & (1 << i); - bool touch = p && !wacom->shared->stylus_in_proximity; - - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - if (touch) { - int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff; - int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff; - - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); - contact_with_no_pen_down_count++; - } - } - input_mt_report_pointer_emulation(input, true); - - /* keep touch state for pen event */ - wacom->shared->touch_down = (contact_with_no_pen_down_count > 0); - - return 1; -} - -static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) -{ - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - bool prox; - int x = 0, y = 0; - - if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG) - return 0; - - if (!wacom->shared->stylus_in_proximity) { - if (len == WACOM_PKGLEN_TPC1FG) { - prox = data[0] & 0x01; - x = get_unaligned_le16(&data[1]); - y = get_unaligned_le16(&data[3]); - } else if (len == WACOM_PKGLEN_TPC1FG_B) { - prox = data[2] & 0x01; - x = get_unaligned_le16(&data[3]); - y = get_unaligned_le16(&data[5]); - } else { - prox = data[1] & 0x01; - x = le16_to_cpup((__le16 *)&data[2]); - y = le16_to_cpup((__le16 *)&data[4]); - } - } else - /* force touch out when pen is in prox */ - prox = 0; - - if (prox) { - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); - } - input_report_key(input, BTN_TOUCH, prox); - - /* keep touch state for pen events */ - wacom->shared->touch_down = prox; - - return 1; -} - -static int wacom_tpc_pen(struct wacom_wac *wacom) -{ - unsigned char *data = wacom->data; - struct input_dev *input = wacom->input; - bool prox = data[1] & 0x20; - - if (!wacom->shared->stylus_in_proximity) /* first in prox */ - /* Going into proximity select tool */ - wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - - /* keep pen state for touch events */ - wacom->shared->stylus_in_proximity = prox; - - /* send pen events only when touch is up or forced out */ - if (!wacom->shared->touch_down) { - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, data[1] & 0x10); - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]); - input_report_key(input, BTN_TOUCH, data[1] & 0x05); - input_report_key(input, wacom->tool[0], prox); - return 1; - } - - return 0; -} - -static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) -{ - unsigned char *data = wacom->data; - - dev_dbg(wacom->input->dev.parent, - "%s: received report #%d\n", __func__, data[0]); - - switch (len) { - case WACOM_PKGLEN_TPC1FG: - return wacom_tpc_single_touch(wacom, len); - - case WACOM_PKGLEN_TPC2FG: - return wacom_tpc_mt_touch(wacom); - - case WACOM_PKGLEN_PENABLED: - return wacom_tpc_pen(wacom); - - default: - switch (data[0]) { - case WACOM_REPORT_TPC1FG: - case WACOM_REPORT_TPCHID: - case WACOM_REPORT_TPCST: - case WACOM_REPORT_TPC1FGE: - return wacom_tpc_single_touch(wacom, len); - - case WACOM_REPORT_TPCMT: - case WACOM_REPORT_TPCMT2: - return wacom_mt_touch(wacom); - - case WACOM_REPORT_PENABLED: - return wacom_tpc_pen(wacom); - } - } - - return 0; -} - -static int wacom_bpt_touch(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; - struct input_dev *pad_input = wacom->pad_input; - unsigned char *data = wacom->data; - int i; - - if (data[0] != 0x02) - return 0; - - for (i = 0; i < 2; i++) { - int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); - bool touch = data[offset + 3] & 0x80; - - /* - * Touch events need to be disabled while stylus is - * in proximity because user's hand is resting on touchpad - * and sending unwanted events. User expects tablet buttons - * to continue working though. - */ - touch = touch && !wacom->shared->stylus_in_proximity; - - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - if (touch) { - int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; - if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { - x <<= 5; - y <<= 5; - } - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); - } - } - - input_mt_report_pointer_emulation(input, true); - - input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0); - input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0); - input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0); - input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0); - - return 1; -} - -static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) -{ - struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; - bool touch = data[1] & 0x80; - int slot = input_mt_get_slot_by_key(input, data[0]); - - if (slot < 0) - return; - - touch = touch && !wacom->shared->stylus_in_proximity; - - input_mt_slot(input, slot); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - - if (touch) { - int x = (data[2] << 4) | (data[4] >> 4); - int y = (data[3] << 4) | (data[4] & 0x0f); - int width, height; - - if (features->type >= INTUOSPS && features->type <= INTUOSPL) { - width = data[5] * 100; - height = data[6] * 100; - } else { - /* - * "a" is a scaled-down area which we assume is - * roughly circular and which can be described as: - * a=(pi*r^2)/C. - */ - int a = data[5]; - int x_res = input_abs_get_res(input, ABS_X); - int y_res = input_abs_get_res(input, ABS_Y); - width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE); - height = width * y_res / x_res; - } - - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); - input_report_abs(input, ABS_MT_TOUCH_MAJOR, width); - input_report_abs(input, ABS_MT_TOUCH_MINOR, height); - } -} - -static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) -{ - struct input_dev *input = wacom->pad_input; - struct wacom_features *features = &wacom->features; - - if (features->type == INTUOSHT) { - input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0); - input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0); - } else { - input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); - input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); - } - input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); - input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); -} - -static int wacom_bpt3_touch(struct wacom_wac *wacom) -{ - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int count = data[1] & 0x07; - int i; - - if (data[0] != 0x02) - return 0; - - /* data has up to 7 fixed sized 8-byte messages starting at data[2] */ - for (i = 0; i < count; i++) { - int offset = (8 * i) + 2; - int msg_id = data[offset]; - - if (msg_id >= 2 && msg_id <= 17) - wacom_bpt3_touch_msg(wacom, data + offset); - else if (msg_id == 128) - wacom_bpt3_button_msg(wacom, data + offset); - - } - input_mt_report_pointer_emulation(input, true); - - return 1; -} - -static int wacom_bpt_pen(struct wacom_wac *wacom) -{ - struct wacom_features *features = &wacom->features; - struct input_dev *input = wacom->input; - unsigned char *data = wacom->data; - int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; - - if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB) - return 0; - - if (data[0] == WACOM_REPORT_USB) { - if (features->type == INTUOSHT && features->touch_max) { - input_report_switch(wacom->shared->touch_input, - SW_MUTE_DEVICE, data[8] & 0x40); - input_sync(wacom->shared->touch_input); - } - return 0; - } - - prox = (data[1] & 0x20) == 0x20; - - /* - * All reports shared between PEN and RUBBER tool must be - * forced to a known starting value (zero) when transitioning to - * out-of-prox. - * - * If not reset then, to userspace, it will look like lost events - * if new tool comes in-prox with same values as previous tool sent. - * - * Hardware does report zero in most out-of-prox cases but not all. - */ - if (prox) { - if (!wacom->shared->stylus_in_proximity) { - if (data[1] & 0x08) { - wacom->tool[0] = BTN_TOOL_RUBBER; - wacom->id[0] = ERASER_DEVICE_ID; - } else { - wacom->tool[0] = BTN_TOOL_PEN; - wacom->id[0] = STYLUS_DEVICE_ID; - } - wacom->shared->stylus_in_proximity = true; - } - x = le16_to_cpup((__le16 *)&data[2]); - y = le16_to_cpup((__le16 *)&data[4]); - p = le16_to_cpup((__le16 *)&data[6]); - /* - * Convert distance from out prox to distance from tablet. - * distance will be greater than distance_max once - * touching and applying pressure; do not report negative - * distance. - */ - if (data[8] <= features->distance_max) - d = features->distance_max - data[8]; - - pen = data[1] & 0x01; - btn1 = data[1] & 0x02; - btn2 = data[1] & 0x04; - } - - input_report_key(input, BTN_TOUCH, pen); - input_report_key(input, BTN_STYLUS, btn1); - input_report_key(input, BTN_STYLUS2, btn2); - - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); - input_report_abs(input, ABS_PRESSURE, p); - input_report_abs(input, ABS_DISTANCE, d); - - if (!prox) { - wacom->id[0] = 0; - wacom->shared->stylus_in_proximity = false; - } - - input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ - input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ - - return 1; -} - -static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) -{ - if (len == WACOM_PKGLEN_BBTOUCH) - return wacom_bpt_touch(wacom); - else if (len == WACOM_PKGLEN_BBTOUCH3) - return wacom_bpt3_touch(wacom); - else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN) - return wacom_bpt_pen(wacom); - - return 0; -} - -static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) -{ - unsigned char *data = wacom->data; - int connected; - - if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL) - return 0; - - connected = data[1] & 0x01; - if (connected) { - int pid, battery; - - if ((wacom->shared->type == INTUOSHT) && - wacom->shared->touch_max) { - input_report_switch(wacom->shared->touch_input, - SW_MUTE_DEVICE, data[5] & 0x40); - input_sync(wacom->shared->touch_input); - } - - pid = get_unaligned_be16(&data[6]); - battery = data[5] & 0x3f; - if (wacom->pid != pid) { - wacom->pid = pid; - wacom_schedule_work(wacom); - } - wacom->battery_capacity = battery; - } else if (wacom->pid != 0) { - /* disconnected while previously connected */ - wacom->pid = 0; - wacom_schedule_work(wacom); - wacom->battery_capacity = 0; - } - - return 0; -} - -void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) -{ - bool sync; - - switch (wacom_wac->features.type) { - case PENPARTNER: - sync = wacom_penpartner_irq(wacom_wac); - break; - - case PL: - sync = wacom_pl_irq(wacom_wac); - break; - - case WACOM_G4: - case GRAPHIRE: - case WACOM_MO: - sync = wacom_graphire_irq(wacom_wac); - break; - - case PTU: - sync = wacom_ptu_irq(wacom_wac); - break; - - case DTU: - sync = wacom_dtu_irq(wacom_wac); - break; - - case DTUS: - sync = wacom_dtus_irq(wacom_wac); - break; - - case INTUOS: - case INTUOS3S: - case INTUOS3: - case INTUOS3L: - case INTUOS4S: - case INTUOS4: - case INTUOS4L: - case CINTIQ: - case WACOM_BEE: - case WACOM_13HD: - case WACOM_21UX2: - case WACOM_22HD: - case WACOM_24HD: - case DTK: - case CINTIQ_HYBRID: - sync = wacom_intuos_irq(wacom_wac); - break; - - case WACOM_24HDT: - sync = wacom_24hdt_irq(wacom_wac); - break; - - case INTUOS5S: - case INTUOS5: - case INTUOS5L: - case INTUOSPS: - case INTUOSPM: - case INTUOSPL: - if (len == WACOM_PKGLEN_BBTOUCH3) - sync = wacom_bpt3_touch(wacom_wac); - else - sync = wacom_intuos_irq(wacom_wac); - break; - - case TABLETPC: - case TABLETPCE: - case TABLETPC2FG: - case MTSCREEN: - case MTTPC: - case MTTPC_B: - sync = wacom_tpc_irq(wacom_wac, len); - break; - - case BAMBOO_PT: - case INTUOSHT: - sync = wacom_bpt_irq(wacom_wac, len); - break; - - case WIRELESS: - sync = wacom_wireless_irq(wacom_wac, len); - break; - - default: - sync = false; - break; - } - - if (sync) { - input_sync(wacom_wac->input); - if (wacom_wac->pad_input) - input_sync(wacom_wac->pad_input); - } -} - -static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) -{ - struct input_dev *input_dev = wacom_wac->input; - - input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_TOOL_BRUSH, input_dev->keybit); - __set_bit(BTN_TOOL_PENCIL, input_dev->keybit); - __set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); - __set_bit(BTN_STYLUS2, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_DISTANCE, - 0, wacom_wac->features.distance_max, 0, 0); - input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); -} - -static void wacom_setup_intuos(struct wacom_wac *wacom_wac) -{ - struct input_dev *input_dev = wacom_wac->input; - - input_set_capability(input_dev, EV_REL, REL_WHEEL); - - wacom_setup_cintiq(wacom_wac); - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - __set_bit(BTN_MIDDLE, input_dev->keybit); - __set_bit(BTN_SIDE, input_dev->keybit); - __set_bit(BTN_EXTRA, input_dev->keybit); - __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); - __set_bit(BTN_TOOL_LENS, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); -} - -void wacom_setup_device_quirks(struct wacom_features *features) -{ - - /* touch device found but size is not defined. use default */ - if (features->device_type == BTN_TOOL_FINGER && !features->x_max) { - features->x_max = 1023; - features->y_max = 1023; - } - - /* these device have multiple inputs */ - if (features->type >= WIRELESS || - (features->type >= INTUOS5S && features->type <= INTUOSHT) || - (features->oVid && features->oPid)) - features->quirks |= WACOM_QUIRK_MULTI_INPUT; - - /* quirk for bamboo touch with 2 low res touches */ - if (features->type == BAMBOO_PT && - features->pktlen == WACOM_PKGLEN_BBTOUCH) { - features->x_max <<= 5; - features->y_max <<= 5; - features->x_fuzz <<= 5; - features->y_fuzz <<= 5; - features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; - } - - if (features->type == WIRELESS) { - - /* monitor never has input and pen/touch have delayed create */ - features->quirks |= WACOM_QUIRK_NO_INPUT; - - /* must be monitor interface if no device_type set */ - if (!features->device_type) - features->quirks |= WACOM_QUIRK_MONITOR; - } -} - -static void wacom_abs_set_axis(struct input_dev *input_dev, - struct wacom_wac *wacom_wac) -{ - struct wacom_features *features = &wacom_wac->features; - - if (features->device_type == BTN_TOOL_PEN) { - input_set_abs_params(input_dev, ABS_X, features->x_min, - features->x_max, features->x_fuzz, 0); - input_set_abs_params(input_dev, ABS_Y, features->y_min, - features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, - features->pressure_max, features->pressure_fuzz, 0); - - /* penabled devices have fixed resolution for each model */ - input_abs_set_res(input_dev, ABS_X, features->x_resolution); - input_abs_set_res(input_dev, ABS_Y, features->y_resolution); - } else { - if (features->touch_max <= 2) { - input_set_abs_params(input_dev, ABS_X, 0, - features->x_max, features->x_fuzz, 0); - input_set_abs_params(input_dev, ABS_Y, 0, - features->y_max, features->y_fuzz, 0); - input_abs_set_res(input_dev, ABS_X, - features->x_resolution); - input_abs_set_res(input_dev, ABS_Y, - features->y_resolution); - } - - if (features->touch_max > 1) { - input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, - features->x_max, features->x_fuzz, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, - features->y_max, features->y_fuzz, 0); - input_abs_set_res(input_dev, ABS_MT_POSITION_X, - features->x_resolution); - input_abs_set_res(input_dev, ABS_MT_POSITION_Y, - features->y_resolution); - } - } -} - -int wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac) -{ - struct wacom_features *features = &wacom_wac->features; - - input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - - __set_bit(BTN_TOUCH, input_dev->keybit); - __set_bit(ABS_MISC, input_dev->absbit); - - wacom_abs_set_axis(input_dev, wacom_wac); - - switch (features->type) { - case WACOM_MO: - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - /* fall through */ - - case WACOM_G4: - /* fall through */ - - case GRAPHIRE: - input_set_capability(input_dev, EV_REL, REL_WHEEL); - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - __set_bit(BTN_MIDDLE, input_dev->keybit); - - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); - __set_bit(BTN_STYLUS2, input_dev->keybit); - - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - break; - - case WACOM_24HD: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); - /* fall through */ - - case DTK: - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - - wacom_setup_cintiq(wacom_wac); - break; - - case WACOM_22HD: - case WACOM_21UX2: - case WACOM_BEE: - case CINTIQ: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - - wacom_setup_cintiq(wacom_wac); - break; - - case WACOM_13HD: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - wacom_setup_cintiq(wacom_wac); - break; - - case INTUOS3: - case INTUOS3L: - case INTUOS3S: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - /* fall through */ - - case INTUOS: - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - - wacom_setup_intuos(wacom_wac); - break; - - case INTUOS5: - case INTUOS5L: - case INTUOSPM: - case INTUOSPL: - case INTUOS5S: - case INTUOSPS: - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - - if (features->device_type == BTN_TOOL_PEN) { - input_set_abs_params(input_dev, ABS_DISTANCE, 0, - features->distance_max, - 0, 0); - - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - - wacom_setup_intuos(wacom_wac); - } else if (features->device_type == BTN_TOOL_FINGER) { - __clear_bit(ABS_MISC, input_dev->absbit); - - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - 0, features->x_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, - 0, features->y_max, 0, 0); - input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER); - } - break; - - case INTUOS4: - case INTUOS4L: - case INTUOS4S: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - wacom_setup_intuos(wacom_wac); - - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - break; - - case WACOM_24HDT: - if (features->device_type == BTN_TOOL_FINGER) { - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); - } - /* fall through */ - - case MTSCREEN: - case MTTPC: - case MTTPC_B: - case TABLETPC2FG: - if (features->device_type == BTN_TOOL_FINGER) { - unsigned int flags = INPUT_MT_DIRECT; - - if (wacom_wac->features.type == TABLETPC2FG) - flags = 0; - - input_mt_init_slots(input_dev, features->touch_max, flags); - } - /* fall through */ - - case TABLETPC: - case TABLETPCE: - __clear_bit(ABS_MISC, input_dev->absbit); - - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - - if (features->device_type != BTN_TOOL_PEN) - break; /* no need to process stylus stuff */ - - /* fall through */ - - case DTUS: - case PL: - case DTU: - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); - __set_bit(BTN_STYLUS2, input_dev->keybit); - - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - break; - - case PTU: - __set_bit(BTN_STYLUS2, input_dev->keybit); - /* fall through */ - - case PENPARTNER: - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); - - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - break; - - case INTUOSHT: - if (features->touch_max && - features->device_type == BTN_TOOL_FINGER) { - input_dev->evbit[0] |= BIT_MASK(EV_SW); - __set_bit(SW_MUTE_DEVICE, input_dev->swbit); - } - /* fall through */ - - case BAMBOO_PT: - __clear_bit(ABS_MISC, input_dev->absbit); - - if (features->device_type == BTN_TOOL_FINGER) { - - if (features->touch_max) { - /* touch interface */ - unsigned int flags = INPUT_MT_POINTER; - - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { - input_set_abs_params(input_dev, - ABS_MT_TOUCH_MAJOR, - 0, features->x_max, 0, 0); - input_set_abs_params(input_dev, - ABS_MT_TOUCH_MINOR, - 0, features->y_max, 0, 0); - } else { - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - flags = 0; - } - input_mt_init_slots(input_dev, features->touch_max, flags); - } else { - /* buttons/keys only interface */ - __clear_bit(ABS_X, input_dev->absbit); - __clear_bit(ABS_Y, input_dev->absbit); - __clear_bit(BTN_TOUCH, input_dev->keybit); - } - } else if (features->device_type == BTN_TOOL_PEN) { - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); - __set_bit(BTN_STYLUS2, input_dev->keybit); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, - features->distance_max, - 0, 0); - } - break; - - case CINTIQ_HYBRID: - input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - - wacom_setup_cintiq(wacom_wac); - break; - } - return 0; -} - -int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac) -{ - struct wacom_features *features = &wacom_wac->features; - int i; - - input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - - /* kept for making legacy xf86-input-wacom working with the wheels */ - __set_bit(ABS_MISC, input_dev->absbit); - - /* kept for making legacy xf86-input-wacom accepting the pad */ - input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); - - switch (features->type) { - case WACOM_MO: - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - break; - - case WACOM_G4: - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - input_set_capability(input_dev, EV_REL, REL_WHEEL); - break; - - case WACOM_24HD: - __set_bit(BTN_A, input_dev->keybit); - __set_bit(BTN_B, input_dev->keybit); - __set_bit(BTN_C, input_dev->keybit); - __set_bit(BTN_X, input_dev->keybit); - __set_bit(BTN_Y, input_dev->keybit); - __set_bit(BTN_Z, input_dev->keybit); - - for (i = 0; i < 10; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - __set_bit(KEY_PROG1, input_dev->keybit); - __set_bit(KEY_PROG2, input_dev->keybit); - __set_bit(KEY_PROG3, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); - break; - - case DTK: - for (i = 0; i < 6; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - break; - - case WACOM_22HD: - __set_bit(KEY_PROG1, input_dev->keybit); - __set_bit(KEY_PROG2, input_dev->keybit); - __set_bit(KEY_PROG3, input_dev->keybit); - /* fall through */ - - case WACOM_21UX2: - __set_bit(BTN_A, input_dev->keybit); - __set_bit(BTN_B, input_dev->keybit); - __set_bit(BTN_C, input_dev->keybit); - __set_bit(BTN_X, input_dev->keybit); - __set_bit(BTN_Y, input_dev->keybit); - __set_bit(BTN_Z, input_dev->keybit); - __set_bit(BTN_BASE, input_dev->keybit); - __set_bit(BTN_BASE2, input_dev->keybit); - /* fall through */ - - case WACOM_BEE: - __set_bit(BTN_8, input_dev->keybit); - __set_bit(BTN_9, input_dev->keybit); - /* fall through */ - - case CINTIQ: - for (i = 0; i < 8; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); - break; - - case WACOM_13HD: - for (i = 0; i < 9; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - break; - - case INTUOS3: - case INTUOS3L: - __set_bit(BTN_4, input_dev->keybit); - __set_bit(BTN_5, input_dev->keybit); - __set_bit(BTN_6, input_dev->keybit); - __set_bit(BTN_7, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); - /* fall through */ - - case INTUOS3S: - __set_bit(BTN_0, input_dev->keybit); - __set_bit(BTN_1, input_dev->keybit); - __set_bit(BTN_2, input_dev->keybit); - __set_bit(BTN_3, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - break; - - case INTUOS5: - case INTUOS5L: - case INTUOSPM: - case INTUOSPL: - __set_bit(BTN_7, input_dev->keybit); - __set_bit(BTN_8, input_dev->keybit); - /* fall through */ - - case INTUOS5S: - case INTUOSPS: - /* touch interface does not have the pad device */ - if (features->device_type != BTN_TOOL_PEN) - return 1; - - for (i = 0; i < 7; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - break; - - case INTUOS4: - case INTUOS4L: - __set_bit(BTN_7, input_dev->keybit); - __set_bit(BTN_8, input_dev->keybit); - /* fall through */ - - case INTUOS4S: - for (i = 0; i < 7; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); - break; - - case CINTIQ_HYBRID: - for (i = 0; i < 9; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - - break; - - case DTUS: - for (i = 0; i < 4; i++) - __set_bit(BTN_0 + i, input_dev->keybit); - break; - - case INTUOSHT: - case BAMBOO_PT: - /* pad device is on the touch interface */ - if (features->device_type != BTN_TOOL_FINGER) - return 1; - - __clear_bit(ABS_MISC, input_dev->absbit); - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_FORWARD, input_dev->keybit); - __set_bit(BTN_BACK, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - - break; - - default: - /* no pad supported */ - return 1; - } - return 0; -} - -static const struct wacom_features wacom_features_0x00 = - { "Wacom Penpartner", 5040, 3780, 255, 0, - PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; -static const struct wacom_features wacom_features_0x10 = - { "Wacom Graphire", 10206, 7422, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x11 = - { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x12 = - { "Wacom Graphire2 5x7", 13918, 10206, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x13 = - { "Wacom Graphire3", 10208, 7424, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x14 = - { "Wacom Graphire3 6x8", 16704, 12064, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x15 = - { "Wacom Graphire4 4x5", 10208, 7424, 511, 63, - WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x16 = - { "Wacom Graphire4 6x8", 16704, 12064, 511, 63, - WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x17 = - { "Wacom BambooFun 4x5", 14760, 9225, 511, 63, - WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x18 = - { "Wacom BambooFun 6x8", 21648, 13530, 511, 63, - WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x19 = - { "Wacom Bamboo1 Medium", 16704, 12064, 511, 63, - GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; -static const struct wacom_features wacom_features_0x60 = - { "Wacom Volito", 5104, 3712, 511, 63, - GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; -static const struct wacom_features wacom_features_0x61 = - { "Wacom PenStation2", 3250, 2320, 255, 63, - GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; -static const struct wacom_features wacom_features_0x62 = - { "Wacom Volito2 4x5", 5104, 3712, 511, 63, - GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; -static const struct wacom_features wacom_features_0x63 = - { "Wacom Volito2 2x3", 3248, 2320, 511, 63, - GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; -static const struct wacom_features wacom_features_0x64 = - { "Wacom PenPartner2", 3250, 2320, 511, 63, - GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; -static const struct wacom_features wacom_features_0x65 = - { "Wacom Bamboo", 14760, 9225, 511, 63, - WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x69 = - { "Wacom Bamboo1", 5104, 3712, 511, 63, - GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; -static const struct wacom_features wacom_features_0x6A = - { "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63, - GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x6B = - { "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63, - GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x20 = - { "Wacom Intuos 4x5", 12700, 10600, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x21 = - { "Wacom Intuos 6x8", 20320, 16240, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x22 = - { "Wacom Intuos 9x12", 30480, 24060, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x23 = - { "Wacom Intuos 12x12", 30480, 31680, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x24 = - { "Wacom Intuos 12x18", 45720, 31680, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x30 = - { "Wacom PL400", 5408, 4056, 255, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x31 = - { "Wacom PL500", 6144, 4608, 255, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x32 = - { "Wacom PL600", 6126, 4604, 255, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x33 = - { "Wacom PL600SX", 6260, 5016, 255, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x34 = - { "Wacom PL550", 6144, 4608, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x35 = - { "Wacom PL800", 7220, 5780, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x37 = - { "Wacom PL700", 6758, 5406, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x38 = - { "Wacom PL510", 6282, 4762, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x39 = - { "Wacom DTU710", 34080, 27660, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0xC4 = - { "Wacom DTF521", 6282, 4762, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0xC0 = - { "Wacom DTF720", 6858, 5506, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0xC2 = - { "Wacom DTF720a", 6858, 5506, 511, 0, - PL, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x03 = - { "Wacom Cintiq Partner", 20480, 15360, 511, 0, - PTU, WACOM_PL_RES, WACOM_PL_RES }; -static const struct wacom_features wacom_features_0x41 = - { "Wacom Intuos2 4x5", 12700, 10600, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x42 = - { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x43 = - { "Wacom Intuos2 9x12", 30480, 24060, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x44 = - { "Wacom Intuos2 12x12", 30480, 31680, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x45 = - { "Wacom Intuos2 12x18", 45720, 31680, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xB0 = - { "Wacom Intuos3 4x5", 25400, 20320, 1023, 63, - INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB1 = - { "Wacom Intuos3 6x8", 40640, 30480, 1023, 63, - INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB2 = - { "Wacom Intuos3 9x12", 60960, 45720, 1023, 63, - INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB3 = - { "Wacom Intuos3 12x12", 60960, 60960, 1023, 63, - INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB4 = - { "Wacom Intuos3 12x19", 97536, 60960, 1023, 63, - INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB5 = - { "Wacom Intuos3 6x11", 54204, 31750, 1023, 63, - INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB7 = - { "Wacom Intuos3 4x6", 31496, 19685, 1023, 63, - INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB8 = - { "Wacom Intuos4 4x6", 31496, 19685, 2047, 63, - INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xB9 = - { "Wacom Intuos4 6x9", 44704, 27940, 2047, 63, - INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xBA = - { "Wacom Intuos4 8x13", 65024, 40640, 2047, 63, - INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xBB = - { "Wacom Intuos4 12x19", 97536, 60960, 2047, 63, - INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xBC = - { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, - INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0x26 = - { "Wacom Intuos5 touch S", 31496, 19685, 2047, 63, - INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; -static const struct wacom_features wacom_features_0x27 = - { "Wacom Intuos5 touch M", 44704, 27940, 2047, 63, - INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; -static const struct wacom_features wacom_features_0x28 = - { "Wacom Intuos5 touch L", 65024, 40640, 2047, 63, - INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; -static const struct wacom_features wacom_features_0x29 = - { "Wacom Intuos5 S", 31496, 19685, 2047, 63, - INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0x2A = - { "Wacom Intuos5 M", 44704, 27940, 2047, 63, - INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0x314 = - { "Wacom Intuos Pro S", 31496, 19685, 2047, 63, - INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x315 = - { "Wacom Intuos Pro M", 44704, 27940, 2047, 63, - INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x317 = - { "Wacom Intuos Pro L", 65024, 40640, 2047, 63, - INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0xF4 = - { "Wacom Cintiq 24HD", 104280, 65400, 2047, 63, - WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; -static const struct wacom_features wacom_features_0xF8 = - { "Wacom Cintiq 24HD touch", 104280, 65400, 2047, 63, /* Pen */ - WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; -static const struct wacom_features wacom_features_0xF6 = - { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x3F = - { "Wacom Cintiq 21UX", 87200, 65600, 1023, 63, - CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xC5 = - { "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63, - WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0xC6 = - { "Wacom Cintiq 12WX", 53020, 33440, 1023, 63, - WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; -static const struct wacom_features wacom_features_0x304 = - { "Wacom Cintiq 13HD", 59352, 33648, 1023, 63, - WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; -static const struct wacom_features wacom_features_0xC7 = - { "Wacom DTU1931", 37832, 30305, 511, 0, - PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xCE = - { "Wacom DTU2231", 47864, 27011, 511, 0, - DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE }; -static const struct wacom_features wacom_features_0xF0 = - { "Wacom DTU1631", 34623, 19553, 511, 0, - DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xFB = - { "Wacom DTU1031", 22096, 13960, 511, 0, - DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x57 = - { "Wacom DTK2241", 95640, 54060, 2047, 63, - DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; -static const struct wacom_features wacom_features_0x59 = /* Pen */ - { "Wacom DTH2242", 95640, 54060, 2047, 63, - DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D }; -static const struct wacom_features wacom_features_0x5D = /* Touch */ - { "Wacom DTH2242", .type = WACOM_24HDT, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0xCC = - { "Wacom Cintiq 21UX2", 87000, 65400, 2047, 63, - WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; -static const struct wacom_features wacom_features_0xFA = - { "Wacom Cintiq 22HD", 95640, 54060, 2047, 63, - WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 }; -static const struct wacom_features wacom_features_0x5B = - { "Wacom Cintiq 22HDT", 95640, 54060, 2047, 63, - WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; -static const struct wacom_features wacom_features_0x5E = - { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x90 = - { "Wacom ISDv4 90", 26202, 16325, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x93 = - { "Wacom ISDv4 93", 26202, 16325, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x97 = - { "Wacom ISDv4 97", 26202, 16325, 511, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x9A = - { "Wacom ISDv4 9A", 26202, 16325, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x9F = - { "Wacom ISDv4 9F", 26202, 16325, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xE2 = - { "Wacom ISDv4 E2", 26202, 16325, 255, 0, - TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xE3 = - { "Wacom ISDv4 E3", 26202, 16325, 255, 0, - TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xE5 = - { "Wacom ISDv4 E5", 26202, 16325, 255, 0, - MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xE6 = - { "Wacom ISDv4 E6", 27760, 15694, 255, 0, - TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xEC = - { "Wacom ISDv4 EC", 25710, 14500, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xED = - { "Wacom ISDv4 ED", 26202, 16325, 255, 0, - TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xEF = - { "Wacom ISDv4 EF", 26202, 16325, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x100 = - { "Wacom ISDv4 100", 26202, 16325, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x101 = - { "Wacom ISDv4 101", 26202, 16325, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x10D = - { "Wacom ISDv4 10D", 26202, 16325, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x10E = - { "Wacom ISDv4 10E", 27760, 15694, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x10F = - { "Wacom ISDv4 10F", 27760, 15694, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x116 = - { "Wacom ISDv4 116", 26202, 16325, 255, 0, - TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x4001 = - { "Wacom ISDv4 4001", 26202, 16325, 255, 0, - MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x4004 = - { "Wacom ISDv4 4004", 11060, 6220, 255, 0, - MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x5000 = - { "Wacom ISDv4 5000", 27848, 15752, 1023, 0, - MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x5002 = - { "Wacom ISDv4 5002", 29576, 16724, 1023, 0, - MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x47 = - { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, - INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x84 = - { "Wacom Wireless Receiver", 0, 0, 0, 0, - WIRELESS, 0, 0, .touch_max = 16 }; -static const struct wacom_features wacom_features_0xD0 = - { "Wacom Bamboo 2FG", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD1 = - { "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD2 = - { "Wacom Bamboo Craft", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD3 = - { "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD4 = - { "Wacom Bamboo Pen", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xD5 = - { "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xD6 = - { "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD7 = - { "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xD8 = - { "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xDA = - { "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xDB = - { "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; -static const struct wacom_features wacom_features_0xDD = - { "Wacom Bamboo Connect", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0xDE = - { "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; -static const struct wacom_features wacom_features_0xDF = - { "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; -static const struct wacom_features wacom_features_0x300 = - { "Wacom Bamboo One S", 14720, 9225, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x301 = - { "Wacom Bamboo One M", 21648, 13530, 1023, 31, - BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x302 = - { "Wacom Intuos PT S", 15200, 9500, 1023, 31, - INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x303 = - { "Wacom Intuos PT M", 21600, 13500, 1023, 31, - INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x30E = - { "Wacom Intuos S", 15200, 9500, 1023, 31, - INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; -static const struct wacom_features wacom_features_0x6004 = - { "ISD-V4", 12800, 8000, 255, 0, - TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -static const struct wacom_features wacom_features_0x307 = - { "Wacom ISDv5 307", 59352, 33648, 2047, 63, - CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200, - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; -static const struct wacom_features wacom_features_0x309 = - { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ - .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10, - .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; - -#define USB_DEVICE_WACOM(prod) \ - HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ - .driver_data = (kernel_ulong_t)&wacom_features_##prod - -#define USB_DEVICE_LENOVO(prod) \ - HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ - .driver_data = (kernel_ulong_t)&wacom_features_##prod - -const struct hid_device_id wacom_ids[] = { - { USB_DEVICE_WACOM(0x00) }, - { USB_DEVICE_WACOM(0x03) }, - { USB_DEVICE_WACOM(0x10) }, - { USB_DEVICE_WACOM(0x11) }, - { USB_DEVICE_WACOM(0x12) }, - { USB_DEVICE_WACOM(0x13) }, - { USB_DEVICE_WACOM(0x14) }, - { USB_DEVICE_WACOM(0x15) }, - { USB_DEVICE_WACOM(0x16) }, - { USB_DEVICE_WACOM(0x17) }, - { USB_DEVICE_WACOM(0x18) }, - { USB_DEVICE_WACOM(0x19) }, - { USB_DEVICE_WACOM(0x20) }, - { USB_DEVICE_WACOM(0x21) }, - { USB_DEVICE_WACOM(0x22) }, - { USB_DEVICE_WACOM(0x23) }, - { USB_DEVICE_WACOM(0x24) }, - { USB_DEVICE_WACOM(0x26) }, - { USB_DEVICE_WACOM(0x27) }, - { USB_DEVICE_WACOM(0x28) }, - { USB_DEVICE_WACOM(0x29) }, - { USB_DEVICE_WACOM(0x2A) }, - { USB_DEVICE_WACOM(0x30) }, - { USB_DEVICE_WACOM(0x31) }, - { USB_DEVICE_WACOM(0x32) }, - { USB_DEVICE_WACOM(0x33) }, - { USB_DEVICE_WACOM(0x34) }, - { USB_DEVICE_WACOM(0x35) }, - { USB_DEVICE_WACOM(0x37) }, - { USB_DEVICE_WACOM(0x38) }, - { USB_DEVICE_WACOM(0x39) }, - { USB_DEVICE_WACOM(0x3F) }, - { USB_DEVICE_WACOM(0x41) }, - { USB_DEVICE_WACOM(0x42) }, - { USB_DEVICE_WACOM(0x43) }, - { USB_DEVICE_WACOM(0x44) }, - { USB_DEVICE_WACOM(0x45) }, - { USB_DEVICE_WACOM(0x47) }, - { USB_DEVICE_WACOM(0x57) }, - { USB_DEVICE_WACOM(0x59) }, - { USB_DEVICE_WACOM(0x5B) }, - { USB_DEVICE_WACOM(0x5D) }, - { USB_DEVICE_WACOM(0x5E) }, - { USB_DEVICE_WACOM(0x60) }, - { USB_DEVICE_WACOM(0x61) }, - { USB_DEVICE_WACOM(0x62) }, - { USB_DEVICE_WACOM(0x63) }, - { USB_DEVICE_WACOM(0x64) }, - { USB_DEVICE_WACOM(0x65) }, - { USB_DEVICE_WACOM(0x69) }, - { USB_DEVICE_WACOM(0x6A) }, - { USB_DEVICE_WACOM(0x6B) }, - { USB_DEVICE_WACOM(0x84) }, - { USB_DEVICE_WACOM(0x90) }, - { USB_DEVICE_WACOM(0x93) }, - { USB_DEVICE_WACOM(0x97) }, - { USB_DEVICE_WACOM(0x9A) }, - { USB_DEVICE_WACOM(0x9F) }, - { USB_DEVICE_WACOM(0xB0) }, - { USB_DEVICE_WACOM(0xB1) }, - { USB_DEVICE_WACOM(0xB2) }, - { USB_DEVICE_WACOM(0xB3) }, - { USB_DEVICE_WACOM(0xB4) }, - { USB_DEVICE_WACOM(0xB5) }, - { USB_DEVICE_WACOM(0xB7) }, - { USB_DEVICE_WACOM(0xB8) }, - { USB_DEVICE_WACOM(0xB9) }, - { USB_DEVICE_WACOM(0xBA) }, - { USB_DEVICE_WACOM(0xBB) }, - { USB_DEVICE_WACOM(0xBC) }, - { USB_DEVICE_WACOM(0xC0) }, - { USB_DEVICE_WACOM(0xC2) }, - { USB_DEVICE_WACOM(0xC4) }, - { USB_DEVICE_WACOM(0xC5) }, - { USB_DEVICE_WACOM(0xC6) }, - { USB_DEVICE_WACOM(0xC7) }, - { USB_DEVICE_WACOM(0xCC) }, - { USB_DEVICE_WACOM(0xCE) }, - { USB_DEVICE_WACOM(0xD0) }, - { USB_DEVICE_WACOM(0xD1) }, - { USB_DEVICE_WACOM(0xD2) }, - { USB_DEVICE_WACOM(0xD3) }, - { USB_DEVICE_WACOM(0xD4) }, - { USB_DEVICE_WACOM(0xD5) }, - { USB_DEVICE_WACOM(0xD6) }, - { USB_DEVICE_WACOM(0xD7) }, - { USB_DEVICE_WACOM(0xD8) }, - { USB_DEVICE_WACOM(0xDA) }, - { USB_DEVICE_WACOM(0xDB) }, - { USB_DEVICE_WACOM(0xDD) }, - { USB_DEVICE_WACOM(0xDE) }, - { USB_DEVICE_WACOM(0xDF) }, - { USB_DEVICE_WACOM(0xE2) }, - { USB_DEVICE_WACOM(0xE3) }, - { USB_DEVICE_WACOM(0xE5) }, - { USB_DEVICE_WACOM(0xE6) }, - { USB_DEVICE_WACOM(0xEC) }, - { USB_DEVICE_WACOM(0xED) }, - { USB_DEVICE_WACOM(0xEF) }, - { USB_DEVICE_WACOM(0xF0) }, - { USB_DEVICE_WACOM(0xF4) }, - { USB_DEVICE_WACOM(0xF6) }, - { USB_DEVICE_WACOM(0xF8) }, - { USB_DEVICE_WACOM(0xFA) }, - { USB_DEVICE_WACOM(0xFB) }, - { USB_DEVICE_WACOM(0x100) }, - { USB_DEVICE_WACOM(0x101) }, - { USB_DEVICE_WACOM(0x10D) }, - { USB_DEVICE_WACOM(0x10E) }, - { USB_DEVICE_WACOM(0x10F) }, - { USB_DEVICE_WACOM(0x116) }, - { USB_DEVICE_WACOM(0x300) }, - { USB_DEVICE_WACOM(0x301) }, - { USB_DEVICE_WACOM(0x302) }, - { USB_DEVICE_WACOM(0x303) }, - { USB_DEVICE_WACOM(0x304) }, - { USB_DEVICE_WACOM(0x307) }, - { USB_DEVICE_WACOM(0x309) }, - { USB_DEVICE_WACOM(0x30E) }, - { USB_DEVICE_WACOM(0x314) }, - { USB_DEVICE_WACOM(0x315) }, - { USB_DEVICE_WACOM(0x317) }, - { USB_DEVICE_WACOM(0x4001) }, - { USB_DEVICE_WACOM(0x4004) }, - { USB_DEVICE_WACOM(0x5000) }, - { USB_DEVICE_WACOM(0x5002) }, - { } -}; -MODULE_DEVICE_TABLE(hid, wacom_ids); diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h deleted file mode 100644 index 4c59247..0000000 --- a/drivers/input/tablet/wacom_wac.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * drivers/input/tablet/wacom_wac.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef WACOM_WAC_H -#define WACOM_WAC_H - -#include - -/* maximum packet length for USB devices */ -#define WACOM_PKGLEN_MAX 68 - -#define WACOM_NAME_MAX 64 - -/* packet length for individual models */ -#define WACOM_PKGLEN_PENPRTN 7 -#define WACOM_PKGLEN_GRAPHIRE 8 -#define WACOM_PKGLEN_BBFUN 9 -#define WACOM_PKGLEN_INTUOS 10 -#define WACOM_PKGLEN_TPC1FG 5 -#define WACOM_PKGLEN_TPC1FG_B 10 -#define WACOM_PKGLEN_TPC2FG 14 -#define WACOM_PKGLEN_BBTOUCH 20 -#define WACOM_PKGLEN_BBTOUCH3 64 -#define WACOM_PKGLEN_BBPEN 10 -#define WACOM_PKGLEN_WIRELESS 32 -#define WACOM_PKGLEN_MTOUCH 62 -#define WACOM_PKGLEN_MTTPC 40 -#define WACOM_PKGLEN_DTUS 68 -#define WACOM_PKGLEN_PENABLED 8 - -/* wacom data size per MT contact */ -#define WACOM_BYTES_PER_MT_PACKET 11 -#define WACOM_BYTES_PER_24HDT_PACKET 14 - -/* device IDs */ -#define STYLUS_DEVICE_ID 0x02 -#define TOUCH_DEVICE_ID 0x03 -#define CURSOR_DEVICE_ID 0x06 -#define ERASER_DEVICE_ID 0x0A -#define PAD_DEVICE_ID 0x0F - -/* wacom data packet report IDs */ -#define WACOM_REPORT_PENABLED 2 -#define WACOM_REPORT_INTUOSREAD 5 -#define WACOM_REPORT_INTUOSWRITE 6 -#define WACOM_REPORT_INTUOSPAD 12 -#define WACOM_REPORT_INTUOS5PAD 3 -#define WACOM_REPORT_DTUSPAD 21 -#define WACOM_REPORT_TPC1FG 6 -#define WACOM_REPORT_TPC2FG 13 -#define WACOM_REPORT_TPCMT 13 -#define WACOM_REPORT_TPCMT2 3 -#define WACOM_REPORT_TPCHID 15 -#define WACOM_REPORT_TPCST 16 -#define WACOM_REPORT_DTUS 17 -#define WACOM_REPORT_TPC1FGE 18 -#define WACOM_REPORT_24HDT 1 -#define WACOM_REPORT_WL 128 -#define WACOM_REPORT_USB 192 - -/* device quirks */ -#define WACOM_QUIRK_MULTI_INPUT 0x0001 -#define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 -#define WACOM_QUIRK_NO_INPUT 0x0004 -#define WACOM_QUIRK_MONITOR 0x0008 - -enum { - PENPARTNER = 0, - GRAPHIRE, - WACOM_G4, - PTU, - PL, - DTU, - DTUS, - INTUOS, - INTUOS3S, - INTUOS3, - INTUOS3L, - INTUOS4S, - INTUOS4, - INTUOS4L, - INTUOS5S, - INTUOS5, - INTUOS5L, - INTUOSPS, - INTUOSPM, - INTUOSPL, - INTUOSHT, - WACOM_21UX2, - WACOM_22HD, - DTK, - WACOM_24HD, - CINTIQ_HYBRID, - CINTIQ, - WACOM_BEE, - WACOM_13HD, - WACOM_MO, - WIRELESS, - BAMBOO_PT, - WACOM_24HDT, - TABLETPC, /* add new TPC below */ - TABLETPCE, - TABLETPC2FG, - MTSCREEN, - MTTPC, - MTTPC_B, - MAX_TYPE -}; - -struct wacom_features { - const char *name; - int x_max; - int y_max; - int pressure_max; - int distance_max; - int type; - int x_resolution; - int y_resolution; - int x_min; - int y_min; - int device_type; - int x_phy; - int y_phy; - unsigned unit; - int unitExpo; - int x_fuzz; - int y_fuzz; - int pressure_fuzz; - int distance_fuzz; - unsigned quirks; - unsigned touch_max; - int oVid; - int oPid; - int pktlen; - bool check_for_hid_type; - int hid_type; -}; - -struct wacom_shared { - bool stylus_in_proximity; - bool touch_down; - /* for wireless device to access USB interfaces */ - unsigned touch_max; - int type; - struct input_dev *touch_input; -}; - -struct wacom_wac { - char name[WACOM_NAME_MAX]; - char pad_name[WACOM_NAME_MAX]; - unsigned char data[WACOM_PKGLEN_MAX]; - int tool[2]; - int id[2]; - __u32 serial[2]; - struct wacom_features features; - struct wacom_shared *shared; - struct input_dev *input; - struct input_dev *pad_input; - int pid; - int battery_capacity; - int num_contacts_left; -}; - -#endif -- cgit v0.10.2 From 0b335cad73c800717856f8f5a5509d367c38b61d Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Thu, 24 Jul 2014 13:15:31 -0700 Subject: Input: wacom - support up to 2048 pressure levels with ISDv4 Signed-off-by: Jason Gerecke Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index cd91521..2f3a3a7 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1086,7 +1086,7 @@ static int wacom_tpc_pen(struct wacom_wac *wacom) input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); - input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]); + input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x07) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); input_report_key(input, wacom->tool[0], prox); return 1; -- cgit v0.10.2 From c757cbafd6afe8e47d12320aa05edcd1b1d97186 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 24 Jul 2014 13:16:17 -0700 Subject: Input: wacom - put a flag when the led are initialized This solves a bug with the wireless receiver: - at plug, the wireless receiver does not know which Wacom device it is connected to, so it does not actually creates all the LEDs - when the tablet connects, wacom->wacom_wac.features.type is set to the proper device so that wacom_wac can understand the packets - when the receiver is unplugged, it detects that a LED should have been created (based on wacom->wacom_wac.features.type) and tries to remove it: crash when removing the sysfs group. Side effect, we can now safely call several times wacom_destroy_leds(). Signed-off-by: Benjamin Tissoires Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index dd67b7d..a678f82 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -118,6 +118,7 @@ struct wacom { u8 hlv; /* status led brightness button pressed (1..127) */ u8 img_lum; /* OLED matrix display brightness */ } led; + bool led_initialized; struct power_supply battery; }; diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 06e304b..f1c6d3d 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -729,12 +729,18 @@ static int wacom_initialize_leds(struct wacom *wacom) return error; } wacom_led_control(wacom); + wacom->led_initialized = true; return 0; } static void wacom_destroy_leds(struct wacom *wacom) { + if (!wacom->led_initialized) + return; + + wacom->led_initialized = false; + switch (wacom->wacom_wac.features.type) { case INTUOS4S: case INTUOS4: -- cgit v0.10.2 From ac8d10101b0e3a0a1478f8bb51bbbb0a56fe0956 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 25 Jul 2014 17:29:48 -0700 Subject: Input: wacom - enhance Wireless Receiver battery reporting - Reports the current status of the battery (discharging, charging, full). - Also notify the upower daemon when there is a change in the battery value. - keep the battery value as a percentage, not the raw value - add WACOM_QUIRK_BATTERY to easily add a battery to a device (required for Bluetooth devices) Signed-off-by: Benjamin Tissoires Acked-by: Przemo Firszt Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index a678f82..98cb93f 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -128,6 +128,13 @@ static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) schedule_work(&wacom->work); } +static inline void wacom_notify_battery(struct wacom_wac *wacom_wac) +{ + struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); + + power_supply_changed(&wacom->battery); +} + extern const struct hid_device_id wacom_ids[]; void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index f1c6d3d..f8744c4 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -769,6 +769,7 @@ static void wacom_destroy_leds(struct wacom *wacom) } static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_CAPACITY }; @@ -786,7 +787,16 @@ static int wacom_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_CAPACITY: val->intval = - wacom->wacom_wac.battery_capacity * 100 / 31; + wacom->wacom_wac.battery_capacity; + break; + case POWER_SUPPLY_PROP_STATUS: + if (wacom->wacom_wac.bat_charging) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (wacom->wacom_wac.battery_capacity == 100 && + wacom->wacom_wac.ps_connected) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; break; default: ret = -EINVAL; @@ -800,7 +810,7 @@ static int wacom_initialize_battery(struct wacom *wacom) { int error = 0; - if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) { + if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) { wacom->battery.properties = wacom_battery_props; wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); wacom->battery.get_property = wacom_battery_get_property; @@ -821,8 +831,8 @@ static int wacom_initialize_battery(struct wacom *wacom) static void wacom_destroy_battery(struct wacom *wacom) { - if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR && - wacom->battery.dev) { + if ((wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) && + wacom->battery.dev) { power_supply_unregister(&wacom->battery); wacom->battery.dev = NULL; } @@ -947,6 +957,7 @@ static void wacom_wireless_work(struct work_struct *work) if (wacom_wac->pid == 0) { hid_info(wacom->hdev, "wireless tablet disconnected\n"); + wacom_wac1->shared->type = 0; } else { const struct hid_device_id *id = wacom_ids; diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 2f3a3a7..cfd2ae1 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1365,7 +1365,7 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) connected = data[1] & 0x01; if (connected) { - int pid, battery; + int pid, battery, ps_connected; if ((wacom->shared->type == INTUOSHT) && wacom->shared->touch_max) { @@ -1375,17 +1375,29 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) } pid = get_unaligned_be16(&data[6]); - battery = data[5] & 0x3f; + battery = (data[5] & 0x3f) * 100 / 31; + ps_connected = !!(data[5] & 0x80); if (wacom->pid != pid) { wacom->pid = pid; wacom_schedule_work(wacom); } - wacom->battery_capacity = battery; + + if (wacom->shared->type && + (battery != wacom->battery_capacity || + ps_connected != wacom->ps_connected)) { + wacom->battery_capacity = battery; + wacom->ps_connected = ps_connected; + wacom->bat_charging = ps_connected && + wacom->battery_capacity < 100; + wacom_notify_battery(wacom); + } } else if (wacom->pid != 0) { /* disconnected while previously connected */ wacom->pid = 0; wacom_schedule_work(wacom); wacom->battery_capacity = 0; + wacom->bat_charging = 0; + wacom->ps_connected = 0; } return 0; @@ -1558,8 +1570,10 @@ void wacom_setup_device_quirks(struct wacom_features *features) features->quirks |= WACOM_QUIRK_NO_INPUT; /* must be monitor interface if no device_type set */ - if (!features->device_type) + if (!features->device_type) { features->quirks |= WACOM_QUIRK_MONITOR; + features->quirks |= WACOM_QUIRK_BATTERY; + } } } diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 4c59247..8a042ac 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -68,6 +68,7 @@ #define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 #define WACOM_QUIRK_NO_INPUT 0x0004 #define WACOM_QUIRK_MONITOR 0x0008 +#define WACOM_QUIRK_BATTERY 0x0010 enum { PENPARTNER = 0, @@ -164,6 +165,8 @@ struct wacom_wac { int pid; int battery_capacity; int num_contacts_left; + int bat_charging; + int ps_connected; }; #endif -- cgit v0.10.2 From d70420b914c98a3758674c6e9858810e0ab4ea30 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 25 Jul 2014 17:31:51 -0700 Subject: Input: wacom - use a uniq name for the battery device The current implementation uses "wacom_battery" as a generic name for batteries. This prevents us to have two Wacom devices with a battery attached as the power system will complain about the name which is already registered. Use an incremental name for each battery attached. Related bug: https://sourceforge.net/p/linuxwacom/bugs/248/ Signed-off-by: Benjamin Tissoires Acked-by: Przemo Firszt Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index f8744c4..a27404d 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -809,12 +809,16 @@ static int wacom_battery_get_property(struct power_supply *psy, static int wacom_initialize_battery(struct wacom *wacom) { int error = 0; + static atomic_t battery_no = ATOMIC_INIT(0); + unsigned long n; if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) { + n = atomic_inc_return(&battery_no) - 1; wacom->battery.properties = wacom_battery_props; wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); wacom->battery.get_property = wacom_battery_get_property; - wacom->battery.name = "wacom_battery"; + sprintf(wacom->wacom_wac.bat_name, "wacom_battery_%ld", n); + wacom->battery.name = wacom->wacom_wac.bat_name; wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; wacom->battery.use_for_apm = 0; diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 8a042ac..6cdf707 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -154,6 +154,7 @@ struct wacom_shared { struct wacom_wac { char name[WACOM_NAME_MAX]; char pad_name[WACOM_NAME_MAX]; + char bat_name[WACOM_NAME_MAX]; unsigned char data[WACOM_PKGLEN_MAX]; int tool[2]; int id[2]; -- cgit v0.10.2 From 7dbd229e10603b3759f366007df2068dc2acfe46 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 25 Jul 2014 17:32:41 -0700 Subject: Input: wacom - register an ac power supply for wireless devices This is used by HID Bluetooth devices but also add some more information to the USB Wireless Receiver. We are just porting the bits from hid-wacom.c to the common driver here. Signed-off-by: Benjamin Tissoires Acked-by: Przemo Firszt Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index 98cb93f..0b89ee7 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -120,6 +120,7 @@ struct wacom { } led; bool led_initialized; struct power_supply battery; + struct power_supply ac; }; static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index a27404d..37888c3 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -774,6 +774,12 @@ static enum power_supply_property wacom_battery_props[] = { POWER_SUPPLY_PROP_CAPACITY }; +static enum power_supply_property wacom_ac_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_SCOPE, +}; + static int wacom_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -806,14 +812,38 @@ static int wacom_battery_get_property(struct power_supply *psy, return ret; } +static int wacom_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wacom *wacom = container_of(psy, struct wacom, ac); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + /* fall through */ + case POWER_SUPPLY_PROP_ONLINE: + val->intval = wacom->wacom_wac.ps_connected; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + static int wacom_initialize_battery(struct wacom *wacom) { - int error = 0; static atomic_t battery_no = ATOMIC_INIT(0); + int error; unsigned long n; if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) { n = atomic_inc_return(&battery_no) - 1; + wacom->battery.properties = wacom_battery_props; wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); wacom->battery.get_property = wacom_battery_get_property; @@ -822,15 +852,31 @@ static int wacom_initialize_battery(struct wacom *wacom) wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; wacom->battery.use_for_apm = 0; + wacom->ac.properties = wacom_ac_props; + wacom->ac.num_properties = ARRAY_SIZE(wacom_ac_props); + wacom->ac.get_property = wacom_ac_get_property; + sprintf(wacom->wacom_wac.ac_name, "wacom_ac_%ld", n); + wacom->ac.name = wacom->wacom_wac.ac_name; + wacom->ac.type = POWER_SUPPLY_TYPE_MAINS; + wacom->ac.use_for_apm = 0; + error = power_supply_register(&wacom->hdev->dev, &wacom->battery); + if (error) + return error; + + power_supply_powers(&wacom->battery, &wacom->hdev->dev); + + error = power_supply_register(&wacom->hdev->dev, &wacom->ac); + if (error) { + power_supply_unregister(&wacom->battery); + return error; + } - if (!error) - power_supply_powers(&wacom->battery, - &wacom->hdev->dev); + power_supply_powers(&wacom->ac, &wacom->hdev->dev); } - return error; + return 0; } static void wacom_destroy_battery(struct wacom *wacom) @@ -839,6 +885,8 @@ static void wacom_destroy_battery(struct wacom *wacom) wacom->battery.dev) { power_supply_unregister(&wacom->battery); wacom->battery.dev = NULL; + power_supply_unregister(&wacom->ac); + wacom->ac.dev = NULL; } } diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 6cdf707..3433a0e 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -155,6 +155,7 @@ struct wacom_wac { char name[WACOM_NAME_MAX]; char pad_name[WACOM_NAME_MAX]; char bat_name[WACOM_NAME_MAX]; + char ac_name[WACOM_NAME_MAX]; unsigned char data[WACOM_PKGLEN_MAX]; int tool[2]; int id[2]; -- cgit v0.10.2 From 91cf07cdaedbc29d03f572a1b0e5cf41ee6febab Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Fri, 25 Jul 2014 18:41:39 -0700 Subject: Input: soc_button_array - add missing memory allocation check Signed-off-by: Pramod Gurav Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 5a6334b..e34dfc2 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -83,6 +83,9 @@ soc_button_device_create(struct pnp_dev *pdev, sizeof(*gpio_keys_pdata) + sizeof(*gpio_keys) * MAX_NBUTTONS, GFP_KERNEL); + if (!gpio_keys_pdata) + return ERR_PTR(-ENOMEM); + gpio_keys = (void *)(gpio_keys_pdata + 1); for (info = button_info; info->name; info++) { -- cgit v0.10.2 From f105e34a4e3ff073b0d96d5f91eb3c6e8dffaa4c Mon Sep 17 00:00:00 2001 From: Yunkang Tang Date: Fri, 25 Jul 2014 22:29:24 -0700 Subject: Input: alps - fix rushmore packet decoding Signed-off-by: Yunkang Tang Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index fb15c64..e15daea 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -559,6 +559,9 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, { alps_decode_pinnacle(f, p, psmouse); + /* Rushmore's packet decode has a bit difference with Pinnacle's */ + f->is_mp = !!(p[5] & 0x40); + f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1; f->x_map |= (p[5] & 0x10) << 11; f->y_map |= (p[5] & 0x20) << 6; } -- cgit v0.10.2 From 20bea68bd1a5c783a23ad9e9de15ffb1b036f3a4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:33:33 -0700 Subject: Input: alps - improve 2-finger reporting on v3 models V3 models only report mt bitmap data when there are 2 or more fingers on the touchpad. So always generate 2 positions in alps_process_bitmap, and for v3 models only fall back to st data when there was no mt data in a mt packet (which should never happen). This fixes 2 finger scrolling not working when using 2 fingers close to each other. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index e15daea..cc197d7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -407,23 +407,20 @@ static int alps_process_bitmap(struct alps_data *priv, fingers = max(fingers_x, fingers_y); /* - * If total fingers is > 1 but either axis reports only a single - * contact, we have overlapping or adjacent fingers. For the - * purposes of creating a bounding box, divide the single contact - * (roughly) equally between the two points. + * If an axis reports only a single contact, we have overlapping or + * adjacent fingers. Divide the single contact between the two points. */ - if (fingers > 1) { - if (fingers_x == 1) { - i = x_low.num_bits / 2; - x_low.num_bits = x_low.num_bits - i; - x_high.start_bit = x_low.start_bit + i; - x_high.num_bits = max(i, 1); - } else if (fingers_y == 1) { - i = y_low.num_bits / 2; - y_low.num_bits = y_low.num_bits - i; - y_high.start_bit = y_low.start_bit + i; - y_high.num_bits = max(i, 1); - } + if (fingers_x == 1) { + i = x_low.num_bits / 2; + x_low.num_bits = x_low.num_bits - i; + x_high.start_bit = x_low.start_bit + i; + x_high.num_bits = max(i, 1); + } + if (fingers_y == 1) { + i = y_low.num_bits / 2; + y_low.num_bits = y_low.num_bits - i; + y_high.start_bit = y_low.start_bit + i; + y_high.num_bits = max(i, 1); } *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / @@ -431,14 +428,12 @@ static int alps_process_bitmap(struct alps_data *priv, *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / (2 * (priv->y_bits - 1)); - if (fingers > 1) { - *x2 = (priv->x_max * - (2 * x_high.start_bit + x_high.num_bits - 1)) / - (2 * (priv->x_bits - 1)); - *y2 = (priv->y_max * - (2 * y_high.start_bit + y_high.num_bits - 1)) / - (2 * (priv->y_bits - 1)); - } + *x2 = (priv->x_max * + (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + *y2 = (priv->y_max * + (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (priv->y_bits - 1)); return fingers; } @@ -607,8 +602,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; - int x1 = 0, y1 = 0, x2 = 0, y2 = 0; - int fingers = 0, bmap_fn; + int x1 = 0, y1 = 0, x2 = 0, y2 = 0, fingers = 0; struct alps_fields f = {0}; priv->decode_fields(&f, packet, psmouse); @@ -629,16 +623,10 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) if (f.is_mp) { fingers = f.fingers; if (priv->proto_version == ALPS_PROTO_V3) { - bmap_fn = alps_process_bitmap(priv, f.x_map, - f.y_map, &x1, &y1, - &x2, &y2); - - /* - * We shouldn't report more than one finger if - * we don't have two coordinates. - */ - if (fingers > 1 && bmap_fn < 2) - fingers = bmap_fn; + if (alps_process_bitmap(priv, f.x_map, + f.y_map, &x1, &y1, + &x2, &y2) == 0) + fingers = 0; /* Use st data */ /* Now process position packet */ priv->decode_fields(&f, priv->multi_data, -- cgit v0.10.2 From 40e8f53bffe074e6cd409cf484e4b55c114c93d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:37:15 -0700 Subject: Input: alps - process_bitmap: don't invert the Y-axis on Rushmore Rushmore models don't have the Y-axis data in the bitmap inverted. Since we now have 2 different Y orientations, make the Y bitmap data processing use a forward loop like the X bitmap data processing, unifying the 2, and invert the data later, except on Rushmore. So far no-one has noticed this because the synaptics driver only uses the non mt coordinates (except on clickpads, and there are no alps clickpads using process_bitmap). Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cc197d7..abe9f9b 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -99,6 +99,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = { #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */ #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with 6-byte ALPS packet */ +#define ALPS_IS_RUSHMORE 0x100 /* device is a rushmore */ static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ @@ -376,15 +377,10 @@ static int alps_process_bitmap(struct alps_data *priv, prev_bit = bit; } - /* - * y bitmap is reversed for what we need (lower positions are in - * higher bits), so we process from the top end. - */ - y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits); prev_bit = 0; point = &y_low; - for (i = 0; y_map != 0; i++, y_map <<= 1) { - bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); + for (i = 0; y_map != 0; i++, y_map >>= 1) { + bit = y_map & 1; if (bit) { if (!prev_bit) { point->start_bit = i; @@ -435,6 +431,12 @@ static int alps_process_bitmap(struct alps_data *priv, (2 * y_high.start_bit + y_high.num_bits - 1)) / (2 * (priv->y_bits - 1)); + /* y-bitmap order is reversed, except on rushmore */ + if (!(priv->flags & ALPS_IS_RUSHMORE)) { + *y1 = priv->y_max - *y1; + *y2 = priv->y_max - *y2; + } + return fingers; } @@ -1981,6 +1983,7 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) priv->decode_fields = alps_decode_rushmore; priv->x_bits = 16; priv->y_bits = 12; + priv->flags |= ALPS_IS_RUSHMORE; /* hack to make addr_command, nibble_command available */ psmouse->private = priv; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 03f88b6..6d2666c 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -46,7 +46,7 @@ struct alps_model_info { unsigned char command_mode_resp; unsigned char proto_version; unsigned char byte0, mask0; - unsigned char flags; + int flags; }; /** @@ -142,7 +142,7 @@ struct alps_data { int addr_command; unsigned char proto_version; unsigned char byte0, mask0; - unsigned char flags; + int flags; int x_max; int y_max; int x_bits; -- cgit v0.10.2 From 036e6c7b541a9a57b4e294ee4727045d81f68ca0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:38:51 -0700 Subject: Input: alps - process_bitmap: add alps_get_bitmap_points() helper function Factor out the identical code for getting the bitmap points for x and y into a helper function. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index abe9f9b..c6af590 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -328,6 +328,33 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, } } +static void alps_get_bitmap_points(unsigned int map, + struct alps_bitmap_point *low, + struct alps_bitmap_point *high, + int *fingers) +{ + struct alps_bitmap_point *point; + int i, bit, prev_bit = 0; + + point = low; + for (i = 0; map != 0; i++, map >>= 1) { + bit = map & 1; + if (bit) { + if (!prev_bit) { + point->start_bit = i; + (*fingers)++; + } + point->num_bits++; + } else { + if (prev_bit) + point = high; + else + point->num_bits = 0; + } + prev_bit = bit; + } +} + /* * Process bitmap data from v3 and v4 protocols. Returns the number of * fingers detected. A return value of 0 means at least one of the @@ -342,59 +369,17 @@ static int alps_process_bitmap(struct alps_data *priv, unsigned int x_map, unsigned int y_map, int *x1, int *y1, int *x2, int *y2) { - struct alps_bitmap_point { - int start_bit; - int num_bits; - }; - - int fingers_x = 0, fingers_y = 0, fingers; - int i, bit, prev_bit; + int i, fingers_x = 0, fingers_y = 0, fingers; struct alps_bitmap_point x_low = {0,}, x_high = {0,}; struct alps_bitmap_point y_low = {0,}, y_high = {0,}; - struct alps_bitmap_point *point; if (!x_map || !y_map) return 0; *x1 = *y1 = *x2 = *y2 = 0; - prev_bit = 0; - point = &x_low; - for (i = 0; x_map != 0; i++, x_map >>= 1) { - bit = x_map & 1; - if (bit) { - if (!prev_bit) { - point->start_bit = i; - fingers_x++; - } - point->num_bits++; - } else { - if (prev_bit) - point = &x_high; - else - point->num_bits = 0; - } - prev_bit = bit; - } - - prev_bit = 0; - point = &y_low; - for (i = 0; y_map != 0; i++, y_map >>= 1) { - bit = y_map & 1; - if (bit) { - if (!prev_bit) { - point->start_bit = i; - fingers_y++; - } - point->num_bits++; - } else { - if (prev_bit) - point = &y_high; - else - point->num_bits = 0; - } - prev_bit = bit; - } + alps_get_bitmap_points(x_map, &x_low, &x_high, &fingers_x); + alps_get_bitmap_points(y_map, &y_low, &y_high, &fingers_y); /* * Fingers can overlap, so we use the maximum count of fingers diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 6d2666c..e900a08 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -65,6 +65,11 @@ struct alps_nibble_commands { unsigned char data; }; +struct alps_bitmap_point { + int start_bit; + int num_bits; +}; + /** * struct alps_fields - decoded version of the report packet * @x_map: Bitmap of active X positions for MT. -- cgit v0.10.2 From 105affbfd588d5aec4171234051f7d589f7e62c1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:41:51 -0700 Subject: Input: alps - process_bitmap: fix counting of high point bits alps_process_bitmap was resetting the point bit-count as soon as it saw 2 0 bits in a row. This means that unless the high point actually is at the end of the bitmap, it would always get its num_bits set to 0. Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers we only count the number of bits occupied by the highest finger. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index c6af590..5b35f4f 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -342,14 +342,13 @@ static void alps_get_bitmap_points(unsigned int map, if (bit) { if (!prev_bit) { point->start_bit = i; + point->num_bits = 0; (*fingers)++; } point->num_bits++; } else { if (prev_bit) point = high; - else - point->num_bits = 0; } prev_bit = bit; } -- cgit v0.10.2 From 28835f4540564e6319028c9c1aeadf16604bed9c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:42:53 -0700 Subject: Input: alps - process_bitmap: round down when spreading adjescent fingers over 2 points This fixes 2 fingers at the same height or width on the touchpad getting reported at different y / x coordinates. Note num_bits is always at least 1. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 5b35f4f..1c99178 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -391,13 +391,13 @@ static int alps_process_bitmap(struct alps_data *priv, * adjacent fingers. Divide the single contact between the two points. */ if (fingers_x == 1) { - i = x_low.num_bits / 2; + i = (x_low.num_bits - 1) / 2; x_low.num_bits = x_low.num_bits - i; x_high.start_bit = x_low.start_bit + i; x_high.num_bits = max(i, 1); } if (fingers_y == 1) { - i = y_low.num_bits / 2; + i = (y_low.num_bits - 1) / 2; y_low.num_bits = y_low.num_bits - i; y_high.start_bit = y_low.start_bit + i; y_high.num_bits = max(i, 1); -- cgit v0.10.2 From 02d04254a5dfb8de1459805c3433cd0e9e4853d7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:43:35 -0700 Subject: Input: alps - use struct input_mt_pos to track coordinates This is a preparation patch for switching the DIY mt handling to using input_mt_assign_slots && input_mt_sync_frame. struct alps_fields is quite large, so while making changes to almost all uses of it lets put it in our priv data instead of on the stack. Having it in our priv data also allows using it directly for storing values which need to be cached, rather then having separate x, y, z, fingers, etc. copies in our priv data. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 1c99178..8c3017a 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -282,11 +282,10 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) * * The bitmaps don't have enough data to track fingers, so this function * only generates points representing a bounding box of at most two contacts. - * These two points are returned in x1, y1, x2, and y2. + * These two points are returned in fields->mt. */ static void alps_process_bitmap_dolphin(struct alps_data *priv, - struct alps_fields *fields, - int *x1, int *y1, int *x2, int *y2) + struct alps_fields *fields) { int box_middle_x, box_middle_y; unsigned int x_map, y_map; @@ -309,8 +308,6 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, if (x_msb > priv->x_bits || y_msb > priv->y_bits) return; - *x1 = *y1 = *x2 = *y2 = 0; - if (fields->fingers > 1) { start_bit = priv->x_bits - x_msb; end_bit = priv->x_bits - x_lsb; @@ -321,10 +318,9 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, end_bit = y_msb - 1; box_middle_y = (priv->y_max * (start_bit + end_bit)) / (2 * (priv->y_bits - 1)); - *x1 = fields->x; - *y1 = fields->y; - *x2 = 2 * box_middle_x - *x1; - *y2 = 2 * box_middle_y - *y1; + fields->mt[0] = fields->st; + fields->mt[1].x = 2 * box_middle_x - fields->mt[0].x; + fields->mt[1].y = 2 * box_middle_y - fields->mt[0].y; } } @@ -361,24 +357,21 @@ static void alps_get_bitmap_points(unsigned int map, * * The bitmaps don't have enough data to track fingers, so this function * only generates points representing a bounding box of all contacts. - * These points are returned in x1, y1, x2, and y2 when the return value + * These points are returned in fields->mt when the return value * is greater than 0. */ static int alps_process_bitmap(struct alps_data *priv, - unsigned int x_map, unsigned int y_map, - int *x1, int *y1, int *x2, int *y2) + struct alps_fields *fields) { int i, fingers_x = 0, fingers_y = 0, fingers; struct alps_bitmap_point x_low = {0,}, x_high = {0,}; struct alps_bitmap_point y_low = {0,}, y_high = {0,}; - if (!x_map || !y_map) + if (!fields->x_map || !fields->y_map) return 0; - *x1 = *y1 = *x2 = *y2 = 0; - - alps_get_bitmap_points(x_map, &x_low, &x_high, &fingers_x); - alps_get_bitmap_points(y_map, &y_low, &y_high, &fingers_y); + alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x); + alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y); /* * Fingers can overlap, so we use the maximum count of fingers @@ -403,22 +396,24 @@ static int alps_process_bitmap(struct alps_data *priv, y_high.num_bits = max(i, 1); } - *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / - (2 * (priv->x_bits - 1)); - *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / - (2 * (priv->y_bits - 1)); + fields->mt[0].x = + (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + fields->mt[0].y = + (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / + (2 * (priv->y_bits - 1)); - *x2 = (priv->x_max * - (2 * x_high.start_bit + x_high.num_bits - 1)) / - (2 * (priv->x_bits - 1)); - *y2 = (priv->y_max * - (2 * y_high.start_bit + y_high.num_bits - 1)) / - (2 * (priv->y_bits - 1)); + fields->mt[1].x = + (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + fields->mt[1].y = + (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (priv->y_bits - 1)); /* y-bitmap order is reversed, except on rushmore */ if (!(priv->flags & ALPS_IS_RUSHMORE)) { - *y1 = priv->y_max - *y1; - *y2 = priv->y_max - *y2; + fields->mt[0].y = priv->y_max - fields->mt[0].y; + fields->mt[1].y = priv->y_max - fields->mt[1].y; } return fingers; @@ -435,11 +430,14 @@ static void alps_set_slot(struct input_dev *dev, int slot, bool active, } } -static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, - int x1, int y1, int x2, int y2) +static void alps_report_semi_mt_data(struct psmouse *psmouse, int num_fingers) { - alps_set_slot(dev, 0, num_fingers != 0, x1, y1); - alps_set_slot(dev, 1, num_fingers == 2, x2, y2); + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + alps_set_slot(dev, 0, num_fingers != 0, f->mt[0].x, f->mt[0].y); + alps_set_slot(dev, 1, num_fingers == 2, f->mt[1].x, f->mt[1].y); } static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) @@ -527,10 +525,10 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, ((p[2] & 0x7f) << 1) | (p[4] & 0x01); - f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | + f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | ((p[0] & 0x30) >> 4); - f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); - f->z = p[5] & 0x7f; + f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); + f->pressure = p[5] & 0x7f; alps_decode_buttons_v3(f, p); } @@ -557,9 +555,9 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, f->is_mp = !!(p[0] & 0x20); if (!f->is_mp) { - f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); - f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); - f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; + f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); + f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); + f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f; alps_decode_buttons_v3(f, p); } else { f->fingers = ((p[0] & 0x6) >> 1 | @@ -588,10 +586,12 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; - int x1 = 0, y1 = 0, x2 = 0, y2 = 0, fingers = 0; - struct alps_fields f = {0}; + struct alps_fields *f = &priv->f; + int fingers = 0; + + memset(f, 0, sizeof(*f)); - priv->decode_fields(&f, packet, psmouse); + priv->decode_fields(f, packet, psmouse); /* * There's no single feature of touchpad position and bitmap packets @@ -606,16 +606,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * packet. Check for this, and when it happens process the * position packet as usual. */ - if (f.is_mp) { - fingers = f.fingers; + if (f->is_mp) { + fingers = f->fingers; if (priv->proto_version == ALPS_PROTO_V3) { - if (alps_process_bitmap(priv, f.x_map, - f.y_map, &x1, &y1, - &x2, &y2) == 0) + if (alps_process_bitmap(priv, f) == 0) fingers = 0; /* Use st data */ /* Now process position packet */ - priv->decode_fields(&f, priv->multi_data, + priv->decode_fields(f, priv->multi_data, psmouse); } else { /* @@ -624,15 +622,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * calculate Pt2, so we need to do position * packet decode first. */ - priv->decode_fields(&f, priv->multi_data, + priv->decode_fields(f, priv->multi_data, psmouse); /* * Since Dolphin's finger number is reliable, * there is no need to compare with bmap_fn. */ - alps_process_bitmap_dolphin(priv, &f, &x1, &y1, - &x2, &y2); + alps_process_bitmap_dolphin(priv, f); } } else { priv->multi_packet = 0; @@ -647,10 +644,10 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * out misidentified bitmap packets, we reject anything with this * bit set. */ - if (f.is_mp) + if (f->is_mp) return; - if (!priv->multi_packet && f.first_mp) { + if (!priv->multi_packet && f->first_mp) { priv->multi_packet = 1; memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); return; @@ -664,7 +661,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * with x, y, and z all zero, so these seem to be flukes. * Ignore them. */ - if (f.x && f.y && !f.z) + if (f->st.x && f->st.y && !f->pressure) return; /* @@ -672,36 +669,36 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * to rely on ST data. */ if (!fingers) { - x1 = f.x; - y1 = f.y; - fingers = f.z > 0 ? 1 : 0; + f->mt[0].x = f->st.x; + f->mt[0].y = f->st.y; + fingers = f->pressure > 0 ? 1 : 0; } - if (f.z >= 64) + if (f->pressure >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); - alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + alps_report_semi_mt_data(psmouse, fingers); input_mt_report_finger_count(dev, fingers); - input_report_key(dev, BTN_LEFT, f.left); - input_report_key(dev, BTN_RIGHT, f.right); - input_report_key(dev, BTN_MIDDLE, f.middle); + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); - if (f.z > 0) { - input_report_abs(dev, ABS_X, f.x); - input_report_abs(dev, ABS_Y, f.y); + if (f->pressure > 0) { + input_report_abs(dev, ABS_X, f->st.x); + input_report_abs(dev, ABS_Y, f->st.y); } - input_report_abs(dev, ABS_PRESSURE, f.z); + input_report_abs(dev, ABS_PRESSURE, f->pressure); input_sync(dev); if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { - input_report_key(dev2, BTN_LEFT, f.ts_left); - input_report_key(dev2, BTN_RIGHT, f.ts_right); - input_report_key(dev2, BTN_MIDDLE, f.ts_middle); + input_report_key(dev2, BTN_LEFT, f->ts_left); + input_report_key(dev2, BTN_RIGHT, f->ts_right); + input_report_key(dev2, BTN_MIDDLE, f->ts_middle); input_sync(dev2); } } @@ -801,12 +798,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse) struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; - int offset; - int x, y, z; - int left, right; - int x1, y1, x2, y2; - int fingers = 0; - unsigned int x_bitmap, y_bitmap; + struct alps_fields *f = &priv->f; + int offset, fingers = 0; /* * v4 has a 6-byte encoding for bitmap data, but this data is @@ -828,67 +821,55 @@ static void alps_process_packet_v4(struct psmouse *psmouse) if (++priv->multi_packet > 2) { priv->multi_packet = 0; - x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | + f->x_map = ((priv->multi_data[2] & 0x1f) << 10) | ((priv->multi_data[3] & 0x60) << 3) | ((priv->multi_data[0] & 0x3f) << 2) | ((priv->multi_data[1] & 0x60) >> 5); - y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | + f->y_map = ((priv->multi_data[5] & 0x01) << 10) | ((priv->multi_data[3] & 0x1f) << 5) | (priv->multi_data[1] & 0x1f); - fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap, - &x1, &y1, &x2, &y2); - - /* Store MT data.*/ - priv->fingers = fingers; - priv->x1 = x1; - priv->x2 = x2; - priv->y1 = y1; - priv->y2 = y2; + f->fingers = alps_process_bitmap(priv, f); } - left = packet[4] & 0x01; - right = packet[4] & 0x02; + f->left = packet[4] & 0x01; + f->right = packet[4] & 0x02; - x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | - ((packet[0] & 0x30) >> 4); - y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); - z = packet[5] & 0x7f; + f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | + ((packet[0] & 0x30) >> 4); + f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); + f->pressure = packet[5] & 0x7f; /* * If there were no contacts in the bitmap, use ST * points in MT reports. * If there were two contacts or more, report MT data. */ - if (priv->fingers < 2) { - x1 = x; - y1 = y; - fingers = z > 0 ? 1 : 0; + if (f->fingers < 2) { + f->mt[0].x = f->st.x; + f->mt[0].y = f->st.y; + fingers = f->pressure > 0 ? 1 : 0; } else { - fingers = priv->fingers; - x1 = priv->x1; - x2 = priv->x2; - y1 = priv->y1; - y2 = priv->y2; + fingers = f->fingers; } - if (z >= 64) + if (f->pressure >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); - alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + alps_report_semi_mt_data(psmouse, fingers); input_mt_report_finger_count(dev, fingers); - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); - if (z > 0) { - input_report_abs(dev, ABS_X, x); - input_report_abs(dev, ABS_Y, y); + if (f->pressure > 0) { + input_report_abs(dev, ABS_X, f->st.x); + input_report_abs(dev, ABS_Y, f->st.y); } - input_report_abs(dev, ABS_PRESSURE, z); + input_report_abs(dev, ABS_PRESSURE, f->pressure); input_sync(dev); } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index e900a08..ee841e5 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -12,6 +12,8 @@ #ifndef _ALPS_H #define _ALPS_H +#include + #define ALPS_PROTO_V1 1 #define ALPS_PROTO_V2 2 #define ALPS_PROTO_V3 3 @@ -19,6 +21,8 @@ #define ALPS_PROTO_V5 5 #define ALPS_PROTO_V6 6 +#define MAX_TOUCHES 2 + #define DOLPHIN_COUNT_PER_ELECTRODE 64 #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ @@ -75,9 +79,9 @@ struct alps_bitmap_point { * @x_map: Bitmap of active X positions for MT. * @y_map: Bitmap of active Y positions for MT. * @fingers: Number of fingers for MT. - * @x: X position for ST. - * @y: Y position for ST. - * @z: Z position for ST. + * @pressure: Pressure. + * @st: position for ST. + * @mt: position for MT. * @first_mp: Packet is the first of a multi-packet report. * @is_mp: Packet is part of a multi-packet report. * @left: Left touchpad button is active. @@ -91,9 +95,11 @@ struct alps_fields { unsigned int x_map; unsigned int y_map; unsigned int fingers; - unsigned int x; - unsigned int y; - unsigned int z; + + int pressure; + struct input_mt_pos st; + struct input_mt_pos mt[MAX_TOUCHES]; + unsigned int first_mp:1; unsigned int is_mp:1; @@ -130,11 +136,7 @@ struct alps_fields { * @prev_fin: Finger bit from previous packet. * @multi_packet: Multi-packet data in progress. * @multi_data: Saved multi-packet data. - * @x1: First X coordinate from last MT report. - * @x2: Second X coordinate from last MT report. - * @y1: First Y coordinate from last MT report. - * @y2: Second Y coordinate from last MT report. - * @fingers: Number of fingers from last MT report. + * @f: Decoded packet data fields. * @quirks: Bitmap of ALPS_QUIRK_*. * @timer: Timer for flushing out the final report packet in the stream. */ @@ -162,8 +164,7 @@ struct alps_data { int prev_fin; int multi_packet; unsigned char multi_data[6]; - int x1, x2, y1, y2; - int fingers; + struct alps_fields f; u8 quirks; struct timer_list timer; }; -- cgit v0.10.2 From cdf333efdcad9891e7f9c26e9ece67776af13ae2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:44:42 -0700 Subject: Input: alps - use standard contact tracking instead of DIY When there are 2 fingers on the pad we don't know which one is which, so use input_mt_assign_slots to make sure the right set of coordinates ends up in the right slot. Besides ensuring things end up in the right slot, this also results in a nice cleanup, since sync_frame also handles non mt position and btn_touch reporting. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 8c3017a..8c2de01 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -419,25 +419,26 @@ static int alps_process_bitmap(struct alps_data *priv, return fingers; } -static void alps_set_slot(struct input_dev *dev, int slot, bool active, - int x, int y) +static void alps_set_slot(struct input_dev *dev, int slot, int x, int y) { input_mt_slot(dev, slot); - input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); - if (active) { - input_report_abs(dev, ABS_MT_POSITION_X, x); - input_report_abs(dev, ABS_MT_POSITION_Y, y); - } + input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); } -static void alps_report_semi_mt_data(struct psmouse *psmouse, int num_fingers) +static void alps_report_mt_data(struct psmouse *psmouse, int n) { struct alps_data *priv = psmouse->private; struct input_dev *dev = psmouse->dev; struct alps_fields *f = &priv->f; + int i, slot[MAX_TOUCHES]; + + input_mt_assign_slots(dev, slot, f->mt, n); + for (i = 0; i < n; i++) + alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y); - alps_set_slot(dev, 0, num_fingers != 0, f->mt[0].x, f->mt[0].y); - alps_set_slot(dev, 1, num_fingers == 2, f->mt[1].x, f->mt[1].y); + input_mt_sync_frame(dev); } static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) @@ -674,12 +675,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) fingers = f->pressure > 0 ? 1 : 0; } - if (f->pressure >= 64) - input_report_key(dev, BTN_TOUCH, 1); - else - input_report_key(dev, BTN_TOUCH, 0); - - alps_report_semi_mt_data(psmouse, fingers); + alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); input_mt_report_finger_count(dev, fingers); @@ -687,10 +683,6 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) input_report_key(dev, BTN_RIGHT, f->right); input_report_key(dev, BTN_MIDDLE, f->middle); - if (f->pressure > 0) { - input_report_abs(dev, ABS_X, f->st.x); - input_report_abs(dev, ABS_Y, f->st.y); - } input_report_abs(dev, ABS_PRESSURE, f->pressure); input_sync(dev); @@ -853,22 +845,13 @@ static void alps_process_packet_v4(struct psmouse *psmouse) fingers = f->fingers; } - if (f->pressure >= 64) - input_report_key(dev, BTN_TOUCH, 1); - else - input_report_key(dev, BTN_TOUCH, 0); - - alps_report_semi_mt_data(psmouse, fingers); + alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); input_mt_report_finger_count(dev, fingers); input_report_key(dev, BTN_LEFT, f->left); input_report_key(dev, BTN_RIGHT, f->right); - if (f->pressure > 0) { - input_report_abs(dev, ABS_X, f->st.x); - input_report_abs(dev, ABS_Y, f->st.y); - } input_report_abs(dev, ABS_PRESSURE, f->pressure); input_sync(dev); @@ -2003,17 +1986,14 @@ static void alps_set_abs_params_st(struct alps_data *priv, static void alps_set_abs_params_mt(struct alps_data *priv, struct input_dev *dev1) { - set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); - input_mt_init_slots(dev1, 2, 0); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); - set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER | + INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); - - input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); } int alps_init(struct psmouse *psmouse) -- cgit v0.10.2 From c38a448a237534aecc40bd826c55132c479f4c42 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:46:53 -0700 Subject: Input: alps - use single touch data when v3 mt data contains only one finger For v3 protocol devices, use the more accurate single touch data when the mt data contains only one finger. Note the mt data reporting a finger count of 1 should never happen, but better safe then sorry. This brings the v3 bitmap handling in line with what the v4 code does, allowing to factor out the common bits into a helper function. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 8c2de01..9a5f08d 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -669,7 +669,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * If we don't have MT data or the bitmaps were empty, we have * to rely on ST data. */ - if (!fingers) { + if (fingers < 2) { f->mt[0].x = f->st.x; f->mt[0].y = f->st.y; fingers = f->pressure > 0 ? 1 : 0; -- cgit v0.10.2 From 68c21870179d78ab7375da432e8dd753d4dc2ba0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:47:25 -0700 Subject: Input: alps - add an alps_report_semi_mt_data function Move all the semi-mt specific handling shared between the v3 and v4 handling code to a common helper function. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 9a5f08d..f16fe7c 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -441,6 +441,32 @@ static void alps_report_mt_data(struct psmouse *psmouse, int n) input_mt_sync_frame(dev); } +static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers) +{ + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + /* Use st data when we don't have mt data */ + if (fingers < 2) { + f->mt[0].x = f->st.x; + f->mt[0].y = f->st.y; + fingers = f->pressure > 0 ? 1 : 0; + } + + alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); + + input_report_abs(dev, ABS_PRESSURE, f->pressure); + + input_sync(dev); +} + static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -585,7 +611,6 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; struct alps_fields *f = &priv->f; int fingers = 0; @@ -665,27 +690,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) if (f->st.x && f->st.y && !f->pressure) return; - /* - * If we don't have MT data or the bitmaps were empty, we have - * to rely on ST data. - */ - if (fingers < 2) { - f->mt[0].x = f->st.x; - f->mt[0].y = f->st.y; - fingers = f->pressure > 0 ? 1 : 0; - } - - alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); - - input_mt_report_finger_count(dev, fingers); - - input_report_key(dev, BTN_LEFT, f->left); - input_report_key(dev, BTN_RIGHT, f->right); - input_report_key(dev, BTN_MIDDLE, f->middle); - - input_report_abs(dev, ABS_PRESSURE, f->pressure); - - input_sync(dev); + alps_report_semi_mt_data(psmouse, fingers); if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { input_report_key(dev2, BTN_LEFT, f->ts_left); @@ -789,9 +794,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; struct alps_fields *f = &priv->f; - int offset, fingers = 0; + int offset; /* * v4 has a 6-byte encoding for bitmap data, but this data is @@ -832,29 +836,7 @@ static void alps_process_packet_v4(struct psmouse *psmouse) f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); f->pressure = packet[5] & 0x7f; - /* - * If there were no contacts in the bitmap, use ST - * points in MT reports. - * If there were two contacts or more, report MT data. - */ - if (f->fingers < 2) { - f->mt[0].x = f->st.x; - f->mt[0].y = f->st.y; - fingers = f->pressure > 0 ? 1 : 0; - } else { - fingers = f->fingers; - } - - alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); - - input_mt_report_finger_count(dev, fingers); - - input_report_key(dev, BTN_LEFT, f->left); - input_report_key(dev, BTN_RIGHT, f->right); - - input_report_abs(dev, ABS_PRESSURE, f->pressure); - - input_sync(dev); + alps_report_semi_mt_data(psmouse, f->fingers); } static void alps_report_bare_ps2_packet(struct psmouse *psmouse, -- cgit v0.10.2 From 99d9996c5c3b47c14c8717c7dd4692a25b83b3f7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:48:02 -0700 Subject: Input: alps - report 2 touches when we've > 2 fingers If we detect more then 2 fingers report 2 touches, rather then only reporting the upper left corner of the bounding box. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index f16fe7c..5026600 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -454,7 +454,7 @@ static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers) fingers = f->pressure > 0 ? 1 : 0; } - alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 1); + alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 2); input_mt_report_finger_count(dev, fingers); -- cgit v0.10.2 From 38c11eaaab0cf8ef6004aa704f1bb2ff5e6bc1b0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:48:44 -0700 Subject: Input: alps - change decode function prototype to return an int So that decode functions can return a failure when appropriate. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 5026600..8f79491 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -538,7 +538,7 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) f->ts_middle = !!(p[3] & 0x40); } -static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, +static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { f->first_mp = !!(p[4] & 0x40); @@ -558,9 +558,11 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, f->pressure = p[5] & 0x7f; alps_decode_buttons_v3(f, p); + + return 0; } -static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, +static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { alps_decode_pinnacle(f, p, psmouse); @@ -570,9 +572,11 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1; f->x_map |= (p[5] & 0x10) << 11; f->y_map |= (p[5] & 0x20) << 6; + + return 0; } -static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, +static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { u64 palm_data = 0; @@ -605,6 +609,8 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, f->x_map = (palm_data >> priv->y_bits) & (BIT(priv->x_bits) - 1); } + + return 0; } static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index ee841e5..17e3ae3 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -157,7 +157,7 @@ struct alps_data { int (*hw_init)(struct psmouse *psmouse); void (*process_packet)(struct psmouse *psmouse); - void (*decode_fields)(struct alps_fields *f, unsigned char *p, + int (*decode_fields)(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse); void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); -- cgit v0.10.2 From c0cd17f6dc7342a81b61017e6b84e363f86081c6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 25 Jul 2014 22:49:14 -0700 Subject: Input: alps - cache firmware version Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 8f79491..31b963d 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1901,6 +1901,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) alps_exit_command_mode(psmouse)) return -EIO; + /* Save the Firmware version */ + memcpy(priv->fw_ver, ec, 3); + if (alps_match_table(psmouse, priv, e7, ec) == 0) { return 0; } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 17e3ae3..e3d0f09 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -124,6 +124,7 @@ struct alps_fields { * known format for this model. The first byte of the report, ANDed with * mask0, should match byte0. * @mask0: The mask used to check the first byte of the report. + * @fw_ver: cached copy of firmware version (EC report) * @flags: Additional device capabilities (passthrough port, trackstick, etc.). * @x_max: Largest possible X position value. * @y_max: Largest possible Y position value. @@ -149,6 +150,7 @@ struct alps_data { int addr_command; unsigned char proto_version; unsigned char byte0, mask0; + unsigned char fw_ver[3]; int flags; int x_max; int y_max; -- cgit v0.10.2 From 3808843cf10e4a696d942359d99822eff1a2de8e Mon Sep 17 00:00:00 2001 From: Yunkang Tang Date: Sat, 26 Jul 2014 13:51:41 -0700 Subject: Input: alps - add support for v7 devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 31b963d..76d372f 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -100,6 +100,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = { #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with 6-byte ALPS packet */ #define ALPS_IS_RUSHMORE 0x100 /* device is a rushmore */ +#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */ static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ @@ -845,6 +846,185 @@ static void alps_process_packet_v4(struct psmouse *psmouse) alps_report_semi_mt_data(psmouse, f->fingers); } +static bool alps_is_valid_package_v7(struct psmouse *psmouse) +{ + switch (psmouse->pktcnt) { + case 3: + return (psmouse->packet[2] & 0x40) == 0x40; + case 4: + return (psmouse->packet[3] & 0x48) == 0x48; + case 6: + return (psmouse->packet[5] & 0x40) == 0x00; + } + return true; +} + +static unsigned char alps_get_packet_id_v7(char *byte) +{ + unsigned char packet_id; + + if (byte[4] & 0x40) + packet_id = V7_PACKET_ID_TWO; + else if (byte[4] & 0x01) + packet_id = V7_PACKET_ID_MULTI; + else if ((byte[0] & 0x10) && !(byte[4] & 0x43)) + packet_id = V7_PACKET_ID_NEW; + else if (byte[1] == 0x00 && byte[4] == 0x00) + packet_id = V7_PACKET_ID_IDLE; + else + packet_id = V7_PACKET_ID_UNKNOWN; + + return packet_id; +} + +static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, + unsigned char *pkt, + unsigned char pkt_id) +{ + mt[0].x = ((pkt[2] & 0x80) << 4); + mt[0].x |= ((pkt[2] & 0x3F) << 5); + mt[0].x |= ((pkt[3] & 0x30) >> 1); + mt[0].x |= (pkt[3] & 0x07); + mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07); + + mt[1].x = ((pkt[3] & 0x80) << 4); + mt[1].x |= ((pkt[4] & 0x80) << 3); + mt[1].x |= ((pkt[4] & 0x3F) << 4); + mt[1].y = ((pkt[5] & 0x80) << 3); + mt[1].y |= ((pkt[5] & 0x3F) << 4); + + switch (pkt_id) { + case V7_PACKET_ID_TWO: + mt[1].x &= ~0x000F; + mt[1].y |= 0x000F; + break; + + case V7_PACKET_ID_MULTI: + mt[1].x &= ~0x003F; + mt[1].y &= ~0x0020; + mt[1].y |= ((pkt[4] & 0x02) << 4); + mt[1].y |= 0x001F; + break; + + case V7_PACKET_ID_NEW: + mt[1].x &= ~0x003F; + mt[1].x |= (pkt[0] & 0x20); + mt[1].y |= 0x000F; + break; + } + + mt[0].y = 0x7FF - mt[0].y; + mt[1].y = 0x7FF - mt[1].y; +} + +static int alps_get_mt_count(struct input_mt_pos *mt) +{ + int i; + + for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++) + /* empty */; + + return i; +} + +static int alps_decode_packet_v7(struct alps_fields *f, + unsigned char *p, + struct psmouse *psmouse) +{ + unsigned char pkt_id; + + pkt_id = alps_get_packet_id_v7(p); + if (pkt_id == V7_PACKET_ID_IDLE) + return 0; + if (pkt_id == V7_PACKET_ID_UNKNOWN) + return -1; + + alps_get_finger_coordinate_v7(f->mt, p, pkt_id); + + if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) { + f->left = (p[0] & 0x80) >> 7; + f->right = (p[0] & 0x20) >> 5; + f->middle = (p[0] & 0x10) >> 4; + } + + if (pkt_id == V7_PACKET_ID_TWO) + f->fingers = alps_get_mt_count(f->mt); + else if (pkt_id == V7_PACKET_ID_MULTI) + f->fingers = 3 + (p[5] & 0x03); + + return 0; +} + +static void alps_process_trackstick_packet_v7(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev2 = priv->dev2; + int x, y, z, left, right, middle; + + /* + * b7 b6 b5 b4 b3 b2 b1 b0 + * Byte0 0 1 0 0 1 0 0 0 + * Byte1 1 1 * * 1 M R L + * Byte2 X7 1 X5 X4 X3 X2 X1 X0 + * Byte3 Z6 1 Y6 X6 1 Y2 Y1 Y0 + * Byte4 Y7 0 Y5 Y4 Y3 1 1 0 + * Byte5 T&P 0 Z5 Z4 Z3 Z2 Z1 Z0 + * M / R / L: Middle / Right / Left button + */ + + x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2); + y = (packet[3] & 0x07) | (packet[4] & 0xb8) | + ((packet[3] & 0x20) << 1); + z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1); + + left = (packet[1] & 0x01); + right = (packet[1] & 0x02) >> 1; + middle = (packet[1] & 0x04) >> 2; + + /* Divide 2 since trackpoint's speed is too fast */ + input_report_rel(dev2, REL_X, (char)x / 2); + input_report_rel(dev2, REL_Y, -((char)y / 2)); + + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + input_report_key(dev2, BTN_MIDDLE, middle); + + input_sync(dev2); +} + +static void alps_process_touchpad_packet_v7(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + memset(f, 0, sizeof(*f)); + + if (priv->decode_fields(f, psmouse->packet, psmouse)) + return; + + alps_report_mt_data(psmouse, alps_get_mt_count(f->mt)); + + input_mt_report_finger_count(dev, f->fingers); + + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); + + input_sync(dev); +} + +static void alps_process_packet_v7(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06) + alps_process_trackstick_packet_v7(psmouse); + else + alps_process_touchpad_packet_v7(psmouse); +} + static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) @@ -1009,6 +1189,14 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } + if (priv->proto_version == ALPS_PROTO_V7 && + !alps_is_valid_package_v7(psmouse)) { + psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", + psmouse->pktcnt - 1, + psmouse->packet[psmouse->pktcnt - 1]); + return PSMOUSE_BAD_DATA; + } + if (psmouse->pktcnt == psmouse->pktsize) { priv->process_packet(psmouse); return PSMOUSE_FULL_PACKET; @@ -1121,6 +1309,22 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, return 0; } +static bool alps_check_valid_firmware_id(unsigned char id[]) +{ + if (id[0] == 0x73) + return true; + + if (id[0] == 0x88 && + (id[1] == 0x07 || + id[1] == 0x08 || + (id[1] & 0xf0) == 0xb0 || + (id[1] & 0xf0) == 0xc0)) { + return true; + } + + return false; +} + static int alps_enter_command_mode(struct psmouse *psmouse) { unsigned char param[4]; @@ -1130,8 +1334,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse) return -1; } - if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && - param[0] != 0x73) { + if (!alps_check_valid_firmware_id(param)) { psmouse_dbg(psmouse, "unknown response while entering command mode\n"); return -1; @@ -1785,6 +1988,32 @@ static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) return 0; } +static int alps_hw_init_v7(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val, ret = -1; + + if (alps_enter_command_mode(psmouse) || + alps_command_mode_read_reg(psmouse, 0xc2d9) == -1) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) + goto error; + + alps_exit_command_mode(psmouse); + return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + +error: + alps_exit_command_mode(psmouse); + return ret; +} + static void alps_set_defaults(struct alps_data *priv) { priv->byte0 = 0x8f; @@ -1843,6 +2072,21 @@ static void alps_set_defaults(struct alps_data *priv) priv->x_max = 2047; priv->y_max = 1535; break; + case ALPS_PROTO_V7: + priv->hw_init = alps_hw_init_v7; + priv->process_packet = alps_process_packet_v7; + priv->decode_fields = alps_decode_packet_v7; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + priv->x_max = 0xfff; + priv->y_max = 0x7ff; + priv->byte0 = 0x48; + priv->mask0 = 0x48; + + if (priv->fw_ver[1] != 0xba) + priv->flags |= ALPS_BUTTONPAD; + break; } } @@ -1914,6 +2158,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) return -EIO; else return 0; + } else if (ec[0] == 0x88 && + ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) { + priv->proto_version = ALPS_PROTO_V7; + alps_set_defaults(priv); + + return 0; } else if (ec[0] == 0x88 && ec[1] == 0x08) { priv->proto_version = ALPS_PROTO_V3; alps_set_defaults(priv); @@ -1985,6 +2235,10 @@ static void alps_set_abs_params_mt(struct alps_data *priv, set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); + + /* V7 is real multi-touch */ + if (priv->proto_version == ALPS_PROTO_V7) + clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit); } int alps_init(struct psmouse *psmouse) @@ -2030,7 +2284,9 @@ int alps_init(struct psmouse *psmouse) dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); priv->set_abs_params(priv, dev1); - input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + /* No pressure on V7 */ + if (priv->proto_version != ALPS_PROTO_V7) + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); @@ -2047,6 +2303,9 @@ int alps_init(struct psmouse *psmouse) dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); + } else if (priv->flags & ALPS_BUTTONPAD) { + set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit); + clear_bit(BTN_RIGHT, dev1->keybit); } else { dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE); } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index e3d0f09..a98ac9b 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -20,6 +20,7 @@ #define ALPS_PROTO_V4 4 #define ALPS_PROTO_V5 5 #define ALPS_PROTO_V6 6 +#define ALPS_PROTO_V7 7 /* t3btl t4s */ #define MAX_TOUCHES 2 @@ -27,6 +28,23 @@ #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ +/* + * enum V7_PACKET_ID - defines the packet type for V7 + * V7_PACKET_ID_IDLE: There's no finger and no button activity. + * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad + * or there's button activities. + * V7_PACKET_ID_MULTI: There are at least three non-resting fingers. + * V7_PACKET_ID_NEW: The finger position in slot is not continues from + * previous packet. +*/ +enum V7_PACKET_ID { + V7_PACKET_ID_IDLE, + V7_PACKET_ID_TWO, + V7_PACKET_ID_MULTI, + V7_PACKET_ID_NEW, + V7_PACKET_ID_UNKNOWN, +}; + /** * struct alps_model_info - touchpad ID table * @signature: E7 response string to match. -- cgit v0.10.2 From 62e65b7e85471d54693a4999e36b2632d5648f43 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 28 Jul 2014 09:58:54 -0700 Subject: Input: pixcir_i2c_ts - use Type-B Multi-Touch protocol Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg Signed-off-by: Roger Quadros Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 19c6c0f..0b01681 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -23,9 +23,12 @@ #include #include #include +#include #include #include +#define PIXCIR_MAX_SLOTS 2 + struct pixcir_i2c_ts_data { struct i2c_client *client; struct input_dev *input; @@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data { bool running; }; -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +struct pixcir_touch { + int x; + int y; +}; + +struct pixcir_report_data { + int num_touches; + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; +}; + +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, + struct pixcir_report_data *report) { - struct pixcir_i2c_ts_data *tsdata = data; u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 *bufptr; u8 touch; - int ret; + int ret, i; + + memset(report, 0, sizeof(struct pixcir_report_data)); ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); if (ret != sizeof(wrbuf)) { @@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) return; } - touch = rdbuf[0]; - if (touch) { - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; - - input_report_key(tsdata->input, BTN_TOUCH, 1); - input_report_abs(tsdata->input, ABS_X, posx1); - input_report_abs(tsdata->input, ABS_Y, posy1); - - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); - input_mt_sync(tsdata->input); - - if (touch == 2) { - input_report_abs(tsdata->input, - ABS_MT_POSITION_X, posx2); - input_report_abs(tsdata->input, - ABS_MT_POSITION_Y, posy2); - input_mt_sync(tsdata->input); - } - } else { - input_report_key(tsdata->input, BTN_TOUCH, 0); + touch = rdbuf[0] & 0x7; + if (touch > PIXCIR_MAX_SLOTS) + touch = PIXCIR_MAX_SLOTS; + + report->num_touches = touch; + bufptr = &rdbuf[2]; + + for (i = 0; i < touch; i++) { + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; + + bufptr = bufptr + 4; } +} + +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, + struct pixcir_report_data *report) +{ + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; + int slots[PIXCIR_MAX_SLOTS]; + struct pixcir_touch *touch; + int n, i, slot; + struct device *dev = &ts->client->dev; + + n = report->num_touches; + if (n > PIXCIR_MAX_SLOTS) + n = PIXCIR_MAX_SLOTS; - input_sync(tsdata->input); + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + pos[i].x = touch->x; + pos[i].y = touch->y; + } + + input_mt_assign_slots(ts->input, slots, pos, n); + + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + slot = slots[i]; + + input_mt_slot(ts->input, slot); + input_mt_report_slot_state(ts->input, + MT_TOOL_FINGER, true); + + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); + + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", + i, slot, touch->x, touch->y); + } + + input_mt_sync_frame(ts->input); + input_sync(ts->input); } static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) { struct pixcir_i2c_ts_data *tsdata = dev_id; const struct pixcir_ts_platform_data *pdata = tsdata->chip; + struct pixcir_report_data report; while (tsdata->running) { - pixcir_ts_poscheck(tsdata); - - if (gpio_get_value(pdata->gpio_attb)) + /* parse packet */ + pixcir_ts_parse(tsdata, &report); + + /* report it */ + pixcir_ts_report(tsdata, &report); + + if (gpio_get_value(pdata->gpio_attb)) { + if (report.num_touches) { + /* + * Last report with no finger up? + * Do it now then. + */ + input_mt_sync_frame(tsdata->input); + input_sync(tsdata->input); + } break; + } msleep(20); } @@ -371,6 +427,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "Error initializing Multi-Touch slots\n"); + return error; + } + input_set_drvdata(input, tsdata); error = devm_gpio_request_one(dev, pdata->gpio_attb, -- cgit v0.10.2 From 36874c7e219fa080141d49fd7bb9bbbdad0507c5 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 28 Jul 2014 10:01:07 -0700 Subject: Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 0b01681..eddda52 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -27,18 +27,20 @@ #include #include -#define PIXCIR_MAX_SLOTS 2 +#define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ struct pixcir_i2c_ts_data { struct i2c_client *client; struct input_dev *input; - const struct pixcir_ts_platform_data *chip; + const struct pixcir_ts_platform_data *pdata; bool running; + int max_fingers; /* Max fingers supported in this instance */ }; struct pixcir_touch { int x; int y; + int id; }; struct pixcir_report_data { @@ -49,13 +51,21 @@ struct pixcir_report_data { static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, struct pixcir_report_data *report) { - u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5]; + u8 wrbuf[1] = { 0 }; u8 *bufptr; u8 touch; int ret, i; + int readsize; + const struct pixcir_i2c_chip_data *chip = &tsdata->pdata->chip; memset(report, 0, sizeof(struct pixcir_report_data)); + i = chip->has_hw_ids ? 1 : 0; + readsize = 2 + tsdata->max_fingers * (4 + i); + if (readsize > sizeof(rdbuf)) + readsize = sizeof(rdbuf); + ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); if (ret != sizeof(wrbuf)) { dev_err(&tsdata->client->dev, @@ -64,7 +74,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, return; } - ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf)); + ret = i2c_master_recv(tsdata->client, rdbuf, readsize); if (ret != sizeof(rdbuf)) { dev_err(&tsdata->client->dev, "%s: i2c_master_recv failed(), ret=%d\n", @@ -73,8 +83,8 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, } touch = rdbuf[0] & 0x7; - if (touch > PIXCIR_MAX_SLOTS) - touch = PIXCIR_MAX_SLOTS; + if (touch > tsdata->max_fingers) + touch = tsdata->max_fingers; report->num_touches = touch; bufptr = &rdbuf[2]; @@ -83,7 +93,12 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; - bufptr = bufptr + 4; + if (chip->has_hw_ids) { + report->touches[i].id = bufptr[4]; + bufptr = bufptr + 5; + } else { + bufptr = bufptr + 4; + } } } @@ -95,22 +110,35 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, struct pixcir_touch *touch; int n, i, slot; struct device *dev = &ts->client->dev; + const struct pixcir_i2c_chip_data *chip = &ts->pdata->chip; n = report->num_touches; if (n > PIXCIR_MAX_SLOTS) n = PIXCIR_MAX_SLOTS; - for (i = 0; i < n; i++) { - touch = &report->touches[i]; - pos[i].x = touch->x; - pos[i].y = touch->y; - } + if (!chip->has_hw_ids) { + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + pos[i].x = touch->x; + pos[i].y = touch->y; + } - input_mt_assign_slots(ts->input, slots, pos, n); + input_mt_assign_slots(ts->input, slots, pos, n); + } for (i = 0; i < n; i++) { touch = &report->touches[i]; - slot = slots[i]; + + if (chip->has_hw_ids) { + slot = input_mt_get_slot_by_key(ts->input, touch->id); + if (slot < 0) { + dev_dbg(dev, "no free slot for id 0x%x\n", + touch->id); + continue; + } + } else { + slot = slots[i]; + } input_mt_slot(ts->input, slot); input_mt_report_slot_state(ts->input, @@ -130,7 +158,7 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) { struct pixcir_i2c_ts_data *tsdata = dev_id; - const struct pixcir_ts_platform_data *pdata = tsdata->chip; + const struct pixcir_ts_platform_data *pdata = tsdata->pdata; struct pixcir_report_data report; while (tsdata->running) { @@ -399,6 +427,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return -EINVAL; } + if (!pdata->chip.max_fingers) { + dev_err(dev, "Invalid max_fingers in pdata\n"); + return -EINVAL; + } + tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL); if (!tsdata) return -ENOMEM; @@ -411,7 +444,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, tsdata->client = client; tsdata->input = input; - tsdata->chip = pdata; + tsdata->pdata = pdata; input->name = client->name; input->id.bustype = BUS_I2C; @@ -427,7 +460,14 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); - error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, + tsdata->max_fingers = tsdata->pdata->chip.max_fingers; + if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) { + tsdata->max_fingers = PIXCIR_MAX_SLOTS; + dev_info(dev, "Limiting maximum fingers to %d\n", + tsdata->max_fingers); + } + + error = input_mt_init_slots(input, tsdata->max_fingers, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { dev_err(dev, "Error initializing Multi-Touch slots\n"); diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h index 160cf35..7bae83b 100644 --- a/include/linux/input/pixcir_ts.h +++ b/include/linux/input/pixcir_ts.h @@ -43,10 +43,22 @@ enum pixcir_int_mode { #define PIXCIR_INT_ENABLE (1UL << 3) #define PIXCIR_INT_POL_HIGH (1UL << 2) +/** + * struct pixcir_irc_chip_data - chip related data + * @max_fingers: Max number of fingers reported simultaneously by h/w + * @has_hw_ids: Hardware supports finger tracking IDs + * + */ +struct pixcir_i2c_chip_data { + u8 max_fingers; + bool has_hw_ids; +}; + struct pixcir_ts_platform_data { int x_max; int y_max; int gpio_attb; /* GPIO connected to ATTB line */ + struct pixcir_i2c_chip_data chip; }; #endif -- cgit v0.10.2 From a4054596e93048d50502f6c31c853bfeba5acb8e Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 28 Jul 2014 10:05:39 -0700 Subject: Input: pixcir_i2c_ts - add device tree support Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt new file mode 100644 index 0000000..6e55109 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt @@ -0,0 +1,26 @@ +* Pixcir I2C touchscreen controllers + +Required properties: +- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected +- attb-gpio: GPIO connected to the ATTB line of the chip +- touchscreen-size-x: horizontal resolution of touchscreen (in pixels) +- touchscreen-size-y: vertical resolution of touchscreen (in pixels) + +Example: + + i2c@00000000 { + /* ... */ + + pixcir_ts@5c { + compatible = "pixcir,pixcir_ts"; + reg = <0x5c>; + interrupts = <2 0>; + attb-gpio = <&gpf 2 0 2>; + touchscreen-size-x = <800>; + touchscreen-size-y = <600>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 46a311e..91bd228 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -99,6 +99,7 @@ panasonic Panasonic Corporation phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. +pixcir PIXCIR MICROELECTRONICS Co., Ltd powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index eddda52..fc49c75 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -26,6 +26,9 @@ #include #include #include +#include +#include +#include #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ @@ -407,16 +410,69 @@ unlock: static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); +#ifdef CONFIG_OF +static const struct of_device_id pixcir_of_match[]; + +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) +{ + struct pixcir_ts_platform_data *pdata; + struct device_node *np = dev->of_node; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(pixcir_of_match), dev); + if (!match) + return ERR_PTR(-EINVAL); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data; + + pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); + /* gpio_attb validity is checked in probe */ + + if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) { + dev_err(dev, "Failed to get touchscreen-size-x property\n"); + return ERR_PTR(-EINVAL); + } + pdata->x_max -= 1; + + if (of_property_read_u32(np, "touchscreen-size-y", &pdata->y_max)) { + dev_err(dev, "Failed to get touchscreen-size-y property\n"); + return ERR_PTR(-EINVAL); + } + pdata->y_max -= 1; + + dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, + pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); + + return pdata; +} +#else +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int pixcir_i2c_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { const struct pixcir_ts_platform_data *pdata = dev_get_platdata(&client->dev); struct device *dev = &client->dev; + struct device_node *np = dev->of_node; struct pixcir_i2c_ts_data *tsdata; struct input_dev *input; int error; + if (np && !pdata) { + pdata = pixcir_parse_dt(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + if (!pdata) { dev_err(&client->dev, "platform data not defined\n"); return -EINVAL; @@ -522,15 +578,36 @@ static int pixcir_i2c_ts_remove(struct i2c_client *client) static const struct i2c_device_id pixcir_i2c_ts_id[] = { { "pixcir_ts", 0 }, + { "pixcir_tangoc", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); +#ifdef CONFIG_OF +static const struct pixcir_i2c_chip_data pixcir_ts_data = { + .max_fingers = 2, + /* no hw id support */ +}; + +static const struct pixcir_i2c_chip_data pixcir_tangoc_data = { + .max_fingers = 5, + .has_hw_ids = true, +}; + +static const struct of_device_id pixcir_of_match[] = { + { .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data }, + { .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data }, + { } +}; +MODULE_DEVICE_TABLE(of, pixcir_of_match); +#endif + static struct i2c_driver pixcir_i2c_ts_driver = { .driver = { .owner = THIS_MODULE, .name = "pixcir_ts", .pm = &pixcir_dev_pm_ops, + .of_match_table = of_match_ptr(pixcir_of_match), }, .probe = pixcir_i2c_ts_probe, .remove = pixcir_i2c_ts_remove, -- cgit v0.10.2 From 342666ceb2f14eea4edd62d187458a8bb0f5a854 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 28 Jul 2014 10:10:58 -0700 Subject: ARM: dts: am43x-epos-evm: Update binding for touchscreen size Update the bindings for touchscreen size. Signed-off-by: Roger Quadros Acked-by: Tony Lindgren Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 90098f9..b742200 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -344,8 +344,8 @@ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; -- cgit v0.10.2 From f048615efc34035e217af148ebdde8ce6efd8af9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 28 Jul 2014 10:11:37 -0700 Subject: ARM: dts: am437x-gp-evm: Update binding for touchscreen size Update the bindings for touchscreen size. Signed-off-by: Roger Quadros Acked-by: Tony Lindgren Signed-off-by: Dmitry Torokhov diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 003766c..2674132 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -277,8 +277,8 @@ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; -- cgit v0.10.2 From 9d469d033d135d80742a4e39e6bbb4519dd5eee1 Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Mon, 28 Jul 2014 10:14:34 -0700 Subject: Input: atmel_mxt_ts - use deep sleep mode when stopped By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index c6dfd0a..03b8571 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -99,9 +99,13 @@ #define MXT_T6_STATUS_COMSERR (1 << 2) /* MXT_GEN_POWER_T7 field */ -#define MXT_POWER_IDLEACQINT 0 -#define MXT_POWER_ACTVACQINT 1 -#define MXT_POWER_ACTV2IDLETO 2 +struct t7_config { + u8 idle; + u8 active; +} __packed; + +#define MXT_POWER_CFG_RUN 0 +#define MXT_POWER_CFG_DEEPSLEEP 1 /* MXT_GEN_ACQUIRE_T8 field */ #define MXT_ACQUIRE_CHRGTIME 0 @@ -113,7 +117,6 @@ #define MXT_ACQUIRE_ATCHCALSTHR 7 /* MXT_TOUCH_MULTI_T9 field */ -#define MXT_TOUCH_CTRL 0 #define MXT_T9_ORIENT 9 #define MXT_T9_RANGE 18 @@ -253,6 +256,7 @@ struct mxt_data { bool update_input; u8 last_message_count; u8 num_touchids; + struct t7_config t7_cfg; /* Cached parameters from object table */ u16 T5_address; @@ -668,20 +672,6 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) data->t6_status = status; } -static int mxt_write_object(struct mxt_data *data, - u8 type, u8 offset, u8 val) -{ - struct mxt_object *object; - u16 reg; - - object = mxt_get_object(data, type); - if (!object || offset >= mxt_obj_size(object)) - return -EINVAL; - - reg = object->start_address; - return mxt_write_reg(data->client, reg + offset, val); -} - static void mxt_input_button(struct mxt_data *data, u8 *message) { struct input_dev *input = data->input_dev; @@ -1712,6 +1702,60 @@ err_free_object_table: return error; } +static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep) +{ + struct device *dev = &data->client->dev; + int error; + struct t7_config *new_config; + struct t7_config deepsleep = { .active = 0, .idle = 0 }; + + if (sleep == MXT_POWER_CFG_DEEPSLEEP) + new_config = &deepsleep; + else + new_config = &data->t7_cfg; + + error = __mxt_write_reg(data->client, data->T7_address, + sizeof(data->t7_cfg), new_config); + if (error) + return error; + + dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n", + new_config->active, new_config->idle); + + return 0; +} + +static int mxt_init_t7_power_cfg(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + int error; + bool retry = false; + +recheck: + error = __mxt_read_reg(data->client, data->T7_address, + sizeof(data->t7_cfg), &data->t7_cfg); + if (error) + return error; + + if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) { + if (!retry) { + dev_dbg(dev, "T7 cfg zero, resetting\n"); + mxt_soft_reset(data); + retry = true; + goto recheck; + } else { + dev_dbg(dev, "T7 cfg zero after reset, overriding\n"); + data->t7_cfg.active = 20; + data->t7_cfg.idle = 100; + return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); + } + } + + dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n", + data->t7_cfg.active, data->t7_cfg.idle); + return 0; +} + static int mxt_configure_objects(struct mxt_data *data, const struct firmware *cfg) { @@ -1725,6 +1769,12 @@ static int mxt_configure_objects(struct mxt_data *data, dev_warn(dev, "Error %d updating config\n", error); } + error = mxt_init_t7_power_cfg(data); + if (error) { + dev_err(dev, "Failed to initialize power cfg\n"); + return error; + } + error = mxt_initialize_t9_input_device(data); if (error) return error; @@ -2001,16 +2051,15 @@ static const struct attribute_group mxt_attr_group = { static void mxt_start(struct mxt_data *data) { - /* Touch enable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); + mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); + + /* Recalibrate since chip has been in deep sleep */ + mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false); } static void mxt_stop(struct mxt_data *data) { - /* Touch disable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); + mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP); } static int mxt_input_open(struct input_dev *dev) @@ -2175,8 +2224,6 @@ static int mxt_resume(struct device *dev) struct mxt_data *data = i2c_get_clientdata(client); struct input_dev *input_dev = data->input_dev; - mxt_soft_reset(data); - mutex_lock(&input_dev->mutex); if (input_dev->users) -- cgit v0.10.2 From aeaf50d4e7d29d9a5f6da45fdcd9fb118f70fb93 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Mon, 28 Jul 2014 10:53:16 -0700 Subject: Input: wacom - add support for 0x12C ISDv4 sensor Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index cfd2ae1..71646b3 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -2332,6 +2332,9 @@ static const struct wacom_features wacom_features_0x10F = static const struct wacom_features wacom_features_0x116 = { "Wacom ISDv4 116", 26202, 16325, 255, 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x12C = + { "Wacom ISDv4 12C", 27848, 15752, 2047, 0, + TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = { "Wacom ISDv4 4001", 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2542,6 +2545,7 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x10E) }, { USB_DEVICE_WACOM(0x10F) }, { USB_DEVICE_WACOM(0x116) }, + { USB_DEVICE_WACOM(0x12C) }, { USB_DEVICE_WACOM(0x300) }, { USB_DEVICE_WACOM(0x301) }, { USB_DEVICE_WACOM(0x302) }, -- cgit v0.10.2 From a1cd3fd09a9b7de710d705127aa616946b567d72 Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Wed, 30 Jul 2014 22:48:24 -0700 Subject: Input: ads7846 - release resources on failure for clean exit Input device must be released(input_free_device) when ads7846_probe_dt fails. This fixes the same by releasing resources on failure. Signed-off-by: Pramod Gurav Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index da201b8..e57ba52 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1302,8 +1302,10 @@ static int ads7846_probe(struct spi_device *spi) pdata = dev_get_platdata(&spi->dev); if (!pdata) { pdata = ads7846_probe_dt(&spi->dev); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); + if (IS_ERR(pdata)) { + err = PTR_ERR(pdata); + goto err_free_mem; + } } ts->model = pdata->model ? : 7846; -- cgit v0.10.2 From f1e31b02b95a70c0770bf91ec440ae242432f4b7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 30 Jul 2014 11:34:31 -0700 Subject: Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are seen: drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function] static int mcs5000_ts_suspend(struct device *dev) ^ drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function] static int mcs5000_ts_resume(struct device *dev) Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these build warnings. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 00510a9..1fb760c 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -248,7 +248,7 @@ static int mcs5000_ts_probe(struct i2c_client *client, return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int mcs5000_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); -- cgit v0.10.2 From 9634c152aa085cb738c7238b14cbe138b4ceb148 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 30 Jul 2014 11:34:49 -0700 Subject: Input: mcs5000_ts - remove ifdef around power management methods We can annonate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 1fb760c..8b47e1f 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -248,8 +248,7 @@ static int mcs5000_ts_probe(struct i2c_client *client, return 0; } -#ifdef CONFIG_PM_SLEEP -static int mcs5000_ts_suspend(struct device *dev) +static int __maybe_unused mcs5000_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -259,7 +258,7 @@ static int mcs5000_ts_suspend(struct device *dev) return 0; } -static int mcs5000_ts_resume(struct device *dev) +static int __maybe_unused mcs5000_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct mcs5000_ts_data *data = i2c_get_clientdata(client); @@ -269,7 +268,6 @@ static int mcs5000_ts_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume); -- cgit v0.10.2 From f3f33c6776997db9d377ff3f1b759869f988d25e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 29 Jul 2014 11:22:07 -0700 Subject: Input: alps - Rushmore and v7 resolution support Add support for querying the physical size from the touchpad for Rushmore and v7 touchpads, and use that to tell userspace the device resolution. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 76d372f..a59a1a6 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1792,6 +1792,45 @@ error: return -1; } +static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch) +{ + int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys; + struct alps_data *priv = psmouse->private; + + reg = alps_command_mode_read_reg(psmouse, reg_pitch); + if (reg < 0) + return reg; + + x_pitch = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ + x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */ + + y_pitch = (char)reg >> 4; /* sign extend upper 4 bits */ + y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */ + + reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1); + if (reg < 0) + return reg; + + x_electrode = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ + x_electrode = 17 + x_electrode; + + y_electrode = (char)reg >> 4; /* sign extend upper 4 bits */ + y_electrode = 13 + y_electrode; + + x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */ + y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */ + + priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */ + priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */ + + psmouse_dbg(psmouse, + "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n", + x_pitch, y_pitch, x_electrode, y_electrode, + x_phys / 10, y_phys / 10, priv->x_res, priv->y_res); + + return 0; +} + static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -1812,6 +1851,9 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) goto error; + if (alps_get_v3_v7_resolution(psmouse, 0xc2da)) + goto error; + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); if (reg_val == -1) goto error; @@ -1997,6 +2039,9 @@ static int alps_hw_init_v7(struct psmouse *psmouse) alps_command_mode_read_reg(psmouse, 0xc2d9) == -1) goto error; + if (alps_get_v3_v7_resolution(psmouse, 0xc397)) + goto error; + if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) goto error; @@ -2230,6 +2275,9 @@ static void alps_set_abs_params_mt(struct alps_data *priv, input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); + input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res); + input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res); + input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT); diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index a98ac9b..66240b4 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -174,6 +174,8 @@ struct alps_data { int y_max; int x_bits; int y_bits; + unsigned int x_res; + unsigned int y_res; int (*hw_init)(struct psmouse *psmouse); void (*process_packet)(struct psmouse *psmouse); -- cgit v0.10.2 From 4b080e3b2fda181817059dde10622e7cb4f85b02 Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Wed, 30 Jul 2014 22:13:58 -0700 Subject: Input: jornada720_ts - switch to using managed resources This switches the driver to using managed resources to simplify error handling and to do away with remove function. Signed-off-by: Pramod Gurav Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 7324c5c..62af48b 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -104,13 +104,13 @@ static int jornada720_ts_probe(struct platform_device *pdev) struct input_dev *input_dev; int error; - jornada_ts = kzalloc(sizeof(struct jornada_ts), GFP_KERNEL); - input_dev = input_allocate_device(); + jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL); + if (!jornada_ts) + return -ENOMEM; - if (!jornada_ts || !input_dev) { - error = -ENOMEM; - goto fail1; - } + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) + return -ENOMEM; platform_set_drvdata(pdev, jornada_ts); @@ -126,36 +126,18 @@ static int jornada720_ts_probe(struct platform_device *pdev) input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); - error = request_irq(IRQ_GPIO9, - jornada720_ts_interrupt, - IRQF_TRIGGER_RISING, - "HP7XX Touchscreen driver", pdev); + error = devm_request_irq(&pdev->dev, IRQ_GPIO9, + jornada720_ts_interrupt, + IRQF_TRIGGER_RISING, + "HP7XX Touchscreen driver", pdev); if (error) { - printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n"); - goto fail1; + dev_err(&pdev->dev, "HP7XX TS : Unable to acquire irq!\n"); + return error; } error = input_register_device(jornada_ts->dev); if (error) - goto fail2; - - return 0; - - fail2: - free_irq(IRQ_GPIO9, pdev); - fail1: - input_free_device(input_dev); - kfree(jornada_ts); - return error; -} - -static int jornada720_ts_remove(struct platform_device *pdev) -{ - struct jornada_ts *jornada_ts = platform_get_drvdata(pdev); - - free_irq(IRQ_GPIO9, pdev); - input_unregister_device(jornada_ts->dev); - kfree(jornada_ts); + return error; return 0; } @@ -165,7 +147,6 @@ MODULE_ALIAS("platform:jornada_ts"); static struct platform_driver jornada720_ts_driver = { .probe = jornada720_ts_probe, - .remove = jornada720_ts_remove, .driver = { .name = "jornada_ts", .owner = THIS_MODULE, -- cgit v0.10.2 From fe96244b6e0105126ae18e9727b295ca49a13f01 Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Wed, 30 Jul 2014 22:14:46 -0700 Subject: Input: jornada720_ts - get rid of space indentation and use tab Signed-off-by: Pramod Gurav Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 62af48b..651ec71 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -36,22 +36,21 @@ struct jornada_ts { static void jornada720_ts_collect_data(struct jornada_ts *jornada_ts) { + /* 3 low word X samples */ + jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY); - /* 3 low word X samples */ - jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY); - jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY); - jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY); + /* 3 low word Y samples */ + jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY); - /* 3 low word Y samples */ - jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY); - jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY); - jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY); + /* combined x samples bits */ + jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY); - /* combined x samples bits */ - jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY); - - /* combined y samples bits */ - jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY); + /* combined y samples bits */ + jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY); } static int jornada720_ts_average(int coords[4]) -- cgit v0.10.2 From e179d5fa8d6dd0df62bc7ba2a6ee777f7d1142b5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 31 Jul 2014 11:57:08 -0700 Subject: Input: imx_keypad - remove ifdef round PM methods We can annotate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 8280cb1..20a99c3 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -531,8 +531,7 @@ static int imx_keypad_probe(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int imx_kbd_suspend(struct device *dev) +static int __maybe_unused imx_kbd_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct imx_keypad *kbd = platform_get_drvdata(pdev); @@ -552,7 +551,7 @@ static int imx_kbd_suspend(struct device *dev) return 0; } -static int imx_kbd_resume(struct device *dev) +static int __maybe_unused imx_kbd_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct imx_keypad *kbd = platform_get_drvdata(pdev); @@ -575,7 +574,6 @@ err_clk: return ret; } -#endif static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume); -- cgit v0.10.2 From 62238f3aadc9bc56da70100e19ec61b9f8d72a5f Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 6 Aug 2014 13:33:54 -0700 Subject: Input: hyperv-keyboard - register as a wakeup source With this patch, we can press a key to wake up the VM after the VM executes "echo freeze > /sys/power/state". Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c index 6132619..e74e5d6 100644 --- a/drivers/input/serio/hyperv-keyboard.c +++ b/drivers/input/serio/hyperv-keyboard.c @@ -170,6 +170,15 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev, serio_interrupt(kbd_dev->hv_serio, scan_code, 0); } spin_unlock_irqrestore(&kbd_dev->lock, flags); + + /* + * Only trigger a wakeup on key down, otherwise + * "echo freeze > /sys/power/state" can't really enter the + * state because the Enter-UP can trigger a wakeup at once. + */ + if (!(info & IS_BREAK)) + pm_wakeup_event(&hv_dev->device, 0); + break; default: @@ -376,6 +385,9 @@ static int hv_kbd_probe(struct hv_device *hv_dev, goto err_close_vmbus; serio_register_port(kbd_dev->hv_serio); + + device_init_wakeup(&hv_dev->device, true); + return 0; err_close_vmbus: @@ -390,6 +402,7 @@ static int hv_kbd_remove(struct hv_device *hv_dev) { struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev); + device_init_wakeup(&hv_dev->device, false); serio_unregister_port(kbd_dev->hv_serio); vmbus_close(hv_dev->channel); kfree(kbd_dev); -- cgit v0.10.2 From f81a1295cd9b6d3d3d7d7126e522d80917134b41 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 13:48:01 -0700 Subject: Input: wacom - prepare the driver to include BT devices Now that wacom is a hid driver, there is no point in having a separate driver for bluetooth devices. This patch prepares the common paths of Bluetooth devices in the common wacom driver. It also adds the sysfs file "speed" used by Bluetooth devices. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 37888c3..18154a5 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -262,6 +262,12 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, return error < 0 ? error : 0; } +static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, + struct wacom_features *features) +{ + return 0; +} + /* * Switch the tablet into its most-capable mode. Wacom tablets are * typically configured to power-up in a mode which sends mouse-like @@ -272,6 +278,9 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, static int wacom_query_tablet_data(struct hid_device *hdev, struct wacom_features *features) { + if (hdev->bus == BUS_BLUETOOTH) + return wacom_bt_query_tablet_data(hdev, 1, features); + if (features->device_type == BTN_TOOL_FINGER) { if (features->type > TABLETPC) { /* MT Tablet PC touch */ @@ -890,6 +899,38 @@ static void wacom_destroy_battery(struct wacom *wacom) } } +static ssize_t wacom_show_speed(struct device *dev, + struct device_attribute + *attr, char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct wacom *wacom = hid_get_drvdata(hdev); + + return snprintf(buf, PAGE_SIZE, "%i\n", wacom->wacom_wac.bt_high_speed); +} + +static ssize_t wacom_store_speed(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct wacom *wacom = hid_get_drvdata(hdev); + u8 new_speed; + + if (kstrtou8(buf, 0, &new_speed)) + return -EINVAL; + + if (new_speed != 0 && new_speed != 1) + return -EINVAL; + + wacom_bt_query_tablet_data(hdev, new_speed, &wacom->wacom_wac.features); + + return count; +} + +static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP, + wacom_show_speed, wacom_store_speed); + static struct input_dev *wacom_allocate_input(struct wacom *wacom) { struct input_dev *input_dev; @@ -1210,6 +1251,9 @@ static int wacom_probe(struct hid_device *hdev, features->y_max = 4096; } + if (hdev->bus == BUS_BLUETOOTH) + features->quirks |= WACOM_QUIRK_BATTERY; + wacom_setup_device_quirks(features); /* set unit to "100th of a mm" for devices not reported by HID */ @@ -1241,10 +1285,25 @@ static int wacom_probe(struct hid_device *hdev, if (error) goto fail2; + if (!(features->quirks & WACOM_QUIRK_MONITOR) && + (features->quirks & WACOM_QUIRK_BATTERY)) { + error = wacom_initialize_battery(wacom); + if (error) + goto fail3; + } + if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { error = wacom_register_inputs(wacom); if (error) - goto fail3; + goto fail4; + } + + if (hdev->bus == BUS_BLUETOOTH) { + error = device_create_file(&hdev->dev, &dev_attr_speed); + if (error) + hid_warn(hdev, + "can't create sysfs speed attribute err: %d\n", + error); } /* Note that if query fails it is not a hard failure */ @@ -1254,7 +1313,7 @@ static int wacom_probe(struct hid_device *hdev, error = hid_hw_start(hdev, HID_CONNECT_HIDRAW); if (error) { hid_err(hdev, "hw start failed\n"); - goto fail4; + goto fail5; } if (features->quirks & WACOM_QUIRK_MONITOR) @@ -1267,7 +1326,10 @@ static int wacom_probe(struct hid_device *hdev, return 0; - fail4: wacom_unregister_inputs(wacom); + fail5: if (hdev->bus == BUS_BLUETOOTH) + device_remove_file(&hdev->dev, &dev_attr_speed); + wacom_unregister_inputs(wacom); + fail4: wacom_destroy_battery(wacom); fail3: wacom_destroy_leds(wacom); fail2: wacom_remove_shared_data(wacom_wac); fail1: kfree(wacom); @@ -1283,6 +1345,8 @@ static void wacom_remove(struct hid_device *hdev) cancel_work_sync(&wacom->work); wacom_unregister_inputs(wacom); + if (hdev->bus == BUS_BLUETOOTH) + device_remove_file(&hdev->dev, &dev_attr_speed); wacom_destroy_battery(wacom); wacom_destroy_leds(wacom); wacom_remove_shared_data(&wacom->wacom_wac); diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 3433a0e..6cefa1e 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -169,6 +169,8 @@ struct wacom_wac { int num_contacts_left; int bat_charging; int ps_connected; + u8 bt_features; + u8 bt_high_speed; }; #endif -- cgit v0.10.2 From 387142bb8fcb263771e1fa6b1a96e6a7ca36e820 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 13:52:56 -0700 Subject: Input: wacom - handle Graphire BT tablets in wacom.ko First, merge the Graphire BT tablet. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1ce751d..cbabd87 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1942,7 +1942,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 4874f4e..967c457 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev) } static const struct hid_device_id wacom_devices[] = { - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { } diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 18154a5..c21e58b 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -265,6 +265,39 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, struct wacom_features *features) { + struct wacom *wacom = hid_get_drvdata(hdev); + int ret; + u8 rep_data[2]; + + switch (features->type) { + case GRAPHIRE_BT: + rep_data[0] = 0x03; + rep_data[1] = 0x00; + ret = wacom_set_report(hdev, HID_FEATURE_REPORT, + rep_data[0], rep_data, 2, 3); + + if (ret >= 0) { + rep_data[0] = speed == 0 ? 0x05 : 0x06; + rep_data[1] = 0x00; + + ret = wacom_set_report(hdev, HID_FEATURE_REPORT, + rep_data[0], rep_data, 2, 3); + + if (ret >= 0) { + wacom->wacom_wac.bt_high_speed = speed; + return 0; + } + } + + /* + * Note that if the raw queries fail, it's not a hard failure + * and it is safe to continue + */ + hid_warn(hdev, "failed to poke device, command %d, err %d\n", + rep_data[0], ret); + break; + } + return 0; } diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 71646b3..fa16a5b 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -25,11 +25,18 @@ #define WACOM_INTUOS_RES 100 #define WACOM_INTUOS3_RES 200 -/* Scale factor relating reported contact size to logical contact area. +/* + * Scale factor relating reported contact size to logical contact area. * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo */ #define WACOM_CONTACT_AREA_SCALE 2607 +/* + * Percent of battery capacity for Graphire. + * 8th value means AC online and show 100% capacity. + */ +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; + static int wacom_penpartner_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; @@ -263,11 +270,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) unsigned char *data = wacom->data; struct input_dev *input = wacom->input; struct input_dev *pad_input = wacom->pad_input; + int battery_capacity, ps_connected; int prox; int rw = 0; int retval = 0; - if (data[0] != WACOM_REPORT_PENABLED) { + if (features->type == GRAPHIRE_BT) { + if (data[0] != WACOM_REPORT_PENABLED_BT) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, + data[0]); + goto exit; + } + } else if (data[0] != WACOM_REPORT_PENABLED) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); goto exit; @@ -301,7 +316,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); + if (features->type == GRAPHIRE_BT) + input_report_abs(input, ABS_PRESSURE, data[6] | + (((__u16) (data[1] & 0x08)) << 5)); + else + input_report_abs(input, ABS_PRESSURE, data[6] | + ((data[7] & 0x03) << 8)); input_report_key(input, BTN_TOUCH, data[1] & 0x01); input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x04); @@ -312,6 +332,20 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) features->type == WACOM_MO) { input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); rw = (data[7] & 0x04) - (data[7] & 0x03); + } else if (features->type == GRAPHIRE_BT) { + /* Compute distance between mouse and tablet */ + rw = 44 - (data[6] >> 2); + rw = clamp_val(rw, 0, 31); + input_report_abs(input, ABS_DISTANCE, rw); + if (((data[1] >> 5) & 3) == 2) { + /* Mouse with wheel */ + input_report_key(input, BTN_MIDDLE, + data[1] & 0x04); + rw = (data[6] & 0x01) ? -1 : + (data[6] & 0x02) ? 1 : 0; + } else { + rw = 0; + } } else { input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); rw = -(signed char)data[6]; @@ -358,6 +392,31 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) retval = 1; } break; + case GRAPHIRE_BT: + prox = data[7] & 0x03; + if (prox || wacom->id[1]) { + wacom->id[1] = PAD_DEVICE_ID; + input_report_key(pad_input, BTN_0, (data[7] & 0x02)); + input_report_key(pad_input, BTN_1, (data[7] & 0x01)); + if (!prox) + wacom->id[1] = 0; + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); + retval = 1; + } + break; + } + + /* Store current battery capacity and power supply state */ + if (features->type == GRAPHIRE_BT) { + rw = (data[7] >> 2 & 0x07); + battery_capacity = batcap_gr[rw]; + ps_connected = rw == 7; + if ((wacom->battery_capacity != battery_capacity) || + (wacom->ps_connected != ps_connected)) { + wacom->battery_capacity = battery_capacity; + wacom->ps_connected = ps_connected; + wacom_notify_battery(wacom); + } } exit: return retval; @@ -1418,6 +1477,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case WACOM_G4: case GRAPHIRE: + case GRAPHIRE_BT: case WACOM_MO: sync = wacom_graphire_irq(wacom_wac); break; @@ -1654,6 +1714,27 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; + case GRAPHIRE_BT: + __clear_bit(ABS_MISC, input_dev->absbit); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); + + input_set_capability(input_dev, EV_REL, REL_WHEEL); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + case WACOM_24HD: input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); @@ -1862,6 +1943,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); switch (features->type) { + case GRAPHIRE_BT: + __set_bit(BTN_0, input_dev->keybit); + __set_bit(BTN_1, input_dev->keybit); + break; + case WACOM_MO: __set_bit(BTN_BACK, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); @@ -2031,6 +2117,9 @@ static const struct wacom_features wacom_features_0x00 = static const struct wacom_features wacom_features_0x10 = { "Wacom Graphire", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x81 = + { "Wacom Graphire BT", 16704, 12064, 511, 32, + GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x11 = { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; @@ -2429,6 +2518,10 @@ static const struct wacom_features wacom_features_0x309 = HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ .driver_data = (kernel_ulong_t)&wacom_features_##prod +#define BT_DEVICE_WACOM(prod) \ + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ + .driver_data = (kernel_ulong_t)&wacom_features_##prod + #define USB_DEVICE_LENOVO(prod) \ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ .driver_data = (kernel_ulong_t)&wacom_features_##prod @@ -2486,6 +2579,7 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x69) }, { USB_DEVICE_WACOM(0x6A) }, { USB_DEVICE_WACOM(0x6B) }, + { BT_DEVICE_WACOM(0x81) }, { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0x90) }, { USB_DEVICE_WACOM(0x93) }, diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 6cefa1e..4f0178b 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -46,6 +46,7 @@ /* wacom data packet report IDs */ #define WACOM_REPORT_PENABLED 2 +#define WACOM_REPORT_PENABLED_BT 3 #define WACOM_REPORT_INTUOSREAD 5 #define WACOM_REPORT_INTUOSWRITE 6 #define WACOM_REPORT_INTUOSPAD 12 @@ -73,6 +74,7 @@ enum { PENPARTNER = 0, GRAPHIRE, + GRAPHIRE_BT, WACOM_G4, PTU, PL, -- cgit v0.10.2 From 81af7e61a774e687ed4a7f37992ef75da57c5ddf Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 13:55:56 -0700 Subject: Input: wacom - handle Intuos 4 BT in wacom.ko A good point of this change is that now, the Intuos4 bluetooth can handle the different tools (artpen, airbrush, mice), and we get a common interface between USB and BT for accessing the LEDs/OLEDs. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index cbabd87..b3181ea 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1942,7 +1942,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_Q_PAD) }, diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 967c457..db2d07d 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev) } static const struct hid_device_id wacom_devices[] = { - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { } }; diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index c21e58b..f5c9c56 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -296,6 +296,20 @@ static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, hid_warn(hdev, "failed to poke device, command %d, err %d\n", rep_data[0], ret); break; + case INTUOS4WL: + if (speed == 1) + wacom->wacom_wac.bt_features &= ~0x20; + else + wacom->wacom_wac.bt_features |= 0x20; + + rep_data[0] = 0x03; + rep_data[1] = wacom->wacom_wac.bt_features; + + ret = wacom_set_report(hdev, HID_FEATURE_REPORT, + rep_data[0], rep_data, 2, 1); + if (ret >= 0) + wacom->wacom_wac.bt_high_speed = speed; + break; } return 0; @@ -720,6 +734,7 @@ static int wacom_initialize_leds(struct wacom *wacom) switch (wacom->wacom_wac.features.type) { case INTUOS4S: case INTUOS4: + case INTUOS4WL: case INTUOS4L: wacom->led.select[0] = 0; wacom->led.select[1] = 0; @@ -786,6 +801,7 @@ static void wacom_destroy_leds(struct wacom *wacom) switch (wacom->wacom_wac.features.type) { case INTUOS4S: case INTUOS4: + case INTUOS4WL: case INTUOS4L: sysfs_remove_group(&wacom->hdev->dev.kobj, &intuos4_led_attr_group); diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index fa16a5b..d4a2d53 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -37,6 +37,11 @@ */ static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; +/* + * Percent of battery capacity for Intuos4 WL, AC has a separate bit. + */ +static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 }; + static int wacom_penpartner_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; @@ -953,6 +958,58 @@ static int int_dist(int x1, int y1, int x2, int y2) return int_sqrt(x*x + y*y); } +static void wacom_intuos_bt_process_data(struct wacom_wac *wacom, + unsigned char *data) +{ + memcpy(wacom->data, data, 10); + wacom_intuos_irq(wacom); + + input_sync(wacom->input); + if (wacom->pad_input) + input_sync(wacom->pad_input); +} + +static int wacom_intuos_bt_irq(struct wacom_wac *wacom, size_t len) +{ + unsigned char data[WACOM_PKGLEN_MAX]; + int i = 1; + unsigned power_raw, battery_capacity, bat_charging, ps_connected; + + memcpy(data, wacom->data, len); + + switch (data[0]) { + case 0x04: + wacom_intuos_bt_process_data(wacom, data + i); + i += 10; + /* fall through */ + case 0x03: + wacom_intuos_bt_process_data(wacom, data + i); + i += 10; + wacom_intuos_bt_process_data(wacom, data + i); + i += 10; + power_raw = data[i]; + bat_charging = (power_raw & 0x08) ? 1 : 0; + ps_connected = (power_raw & 0x10) ? 1 : 0; + battery_capacity = batcap_i4[power_raw & 0x07]; + if ((wacom->battery_capacity != battery_capacity) || + (wacom->bat_charging != bat_charging) || + (wacom->ps_connected != ps_connected)) { + wacom->battery_capacity = battery_capacity; + wacom->bat_charging = bat_charging; + wacom->ps_connected = ps_connected; + wacom_notify_battery(wacom); + } + + break; + default: + dev_dbg(wacom->input->dev.parent, + "Unknown report: %d,%d size:%zu\n", + data[0], data[1], len); + return 0; + } + return 0; +} + static int wacom_24hdt_irq(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; @@ -1512,6 +1569,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) sync = wacom_intuos_irq(wacom_wac); break; + case INTUOS4WL: + sync = wacom_intuos_bt_irq(wacom_wac, len); + break; + case WACOM_24HDT: sync = wacom_24hdt_irq(wacom_wac); break; @@ -1803,6 +1864,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, break; case INTUOS4: + case INTUOS4WL: case INTUOS4L: case INTUOS4S: input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); @@ -2065,6 +2127,15 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); break; + case INTUOS4WL: + /* + * For Bluetooth devices, the udev rule does not work correctly + * for pads unless we add a stylus capability, which forces + * ID_INPUT_TABLET to be set. + */ + __set_bit(BTN_STYLUS, input_dev->keybit); + /* fall through */ + case INTUOS4: case INTUOS4L: __set_bit(BTN_7, input_dev->keybit); @@ -2279,6 +2350,9 @@ static const struct wacom_features wacom_features_0xBB = static const struct wacom_features wacom_features_0xBC = { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xBD = + { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, + INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x26 = { "Wacom Intuos5 touch S", 31496, 19685, 2047, 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; @@ -2598,6 +2672,7 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xBA) }, { USB_DEVICE_WACOM(0xBB) }, { USB_DEVICE_WACOM(0xBC) }, + { BT_DEVICE_WACOM(0xBD) }, { USB_DEVICE_WACOM(0xC0) }, { USB_DEVICE_WACOM(0xC2) }, { USB_DEVICE_WACOM(0xC4) }, diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 4f0178b..339ab5d 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -86,6 +86,7 @@ enum { INTUOS3L, INTUOS4S, INTUOS4, + INTUOS4WL, INTUOS4L, INTUOS5S, INTUOS5, -- cgit v0.10.2 From 849e2f06781a0c73573024bdaea0babc0c4e31af Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 13:58:25 -0700 Subject: Input: wacom - check for bluetooth protocol while setting OLEDs Bluetooth Intuos 4 use 1-bit definition while the USB ones use a 4-bits definition. This changes the size of the raw image we receive, and thus the kernel will only accept 1-bit images for Bluetooth and 4-bits for USB. Signed-off-by: Benjamin Tissoires Signed-off-by: Przemo Firszt Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index f5c9c56..a12cd9c 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -20,6 +20,7 @@ #define WAC_CMD_LED_CONTROL 0x20 #define WAC_CMD_ICON_START 0x21 #define WAC_CMD_ICON_XFER 0x23 +#define WAC_CMD_ICON_BT_XFER 0x26 #define WAC_CMD_RETRIES 10 static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id, @@ -526,12 +527,14 @@ static int wacom_led_control(struct wacom *wacom) return retval; } -static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img) +static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id, + const unsigned len, const void *img) { unsigned char *buf; int i, retval; + const unsigned chunk_len = len / 4; /* 4 chunks are needed to be sent */ - buf = kzalloc(259, GFP_KERNEL); + buf = kzalloc(chunk_len + 3 , GFP_KERNEL); if (!buf) return -ENOMEM; @@ -543,15 +546,15 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *im if (retval < 0) goto out; - buf[0] = WAC_CMD_ICON_XFER; + buf[0] = xfer_id; buf[1] = button_id & 0x07; for (i = 0; i < 4; i++) { buf[2] = i; - memcpy(buf + 3, img + i * 256, 256); + memcpy(buf + 3, img + i * chunk_len, chunk_len); retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_ICON_XFER, - buf, 259, WAC_CMD_RETRIES); + xfer_id, buf, chunk_len + 3, + WAC_CMD_RETRIES); if (retval < 0) break; } @@ -652,13 +655,23 @@ static ssize_t wacom_button_image_store(struct device *dev, int button_id, struct hid_device *hdev = container_of(dev, struct hid_device, dev); struct wacom *wacom = hid_get_drvdata(hdev); int err; + unsigned len; + u8 xfer_id; - if (count != 1024) + if (hdev->bus == BUS_BLUETOOTH) { + len = 256; + xfer_id = WAC_CMD_ICON_BT_XFER; + } else { + len = 1024; + xfer_id = WAC_CMD_ICON_XFER; + } + + if (count != len) return -EINVAL; mutex_lock(&wacom->lock); - err = wacom_led_putimage(wacom, button_id, buf); + err = wacom_led_putimage(wacom, button_id, xfer_id, len, buf); mutex_unlock(&wacom->lock); -- cgit v0.10.2 From 296b737874b8a671a8f9ee5a64602f15c06ae937 Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Wed, 6 Aug 2014 14:00:38 -0700 Subject: Input: wacom - remove passing id for wacom_set_report Every call of wacom_set_report was passing "id" as a separate parameter and buffer also passed the same information. We can use first u8 of the buffer instead of "id" Signed-off-by: Przemo Firszt Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index a12cd9c..6e0c191 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -36,13 +36,13 @@ static int wacom_get_report(struct hid_device *hdev, u8 type, u8 id, return retval; } -static int wacom_set_report(struct hid_device *hdev, u8 type, u8 id, - void *buf, size_t size, unsigned int retries) +static int wacom_set_report(struct hid_device *hdev, u8 type, u8 *buf, + size_t size, unsigned int retries) { int retval; do { - retval = hid_hw_raw_request(hdev, id, buf, size, type, + retval = hid_hw_raw_request(hdev, buf[0], buf, size, type, HID_REQ_SET_REPORT); } while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries); @@ -251,8 +251,8 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, rep_data[0] = report_id; rep_data[1] = mode; - error = wacom_set_report(hdev, HID_FEATURE_REPORT, - report_id, rep_data, length, 1); + error = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, + length, 1); if (error >= 0) error = wacom_get_report(hdev, HID_FEATURE_REPORT, report_id, rep_data, length, 1); @@ -274,15 +274,15 @@ static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, case GRAPHIRE_BT: rep_data[0] = 0x03; rep_data[1] = 0x00; - ret = wacom_set_report(hdev, HID_FEATURE_REPORT, - rep_data[0], rep_data, 2, 3); + ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2, + 3); if (ret >= 0) { rep_data[0] = speed == 0 ? 0x05 : 0x06; rep_data[1] = 0x00; ret = wacom_set_report(hdev, HID_FEATURE_REPORT, - rep_data[0], rep_data, 2, 3); + rep_data, 2, 3); if (ret >= 0) { wacom->wacom_wac.bt_high_speed = speed; @@ -306,8 +306,8 @@ static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, rep_data[0] = 0x03; rep_data[1] = wacom->wacom_wac.bt_features; - ret = wacom_set_report(hdev, HID_FEATURE_REPORT, - rep_data[0], rep_data, 2, 1); + ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2, + 1); if (ret >= 0) wacom->wacom_wac.bt_high_speed = speed; break; @@ -520,8 +520,8 @@ static int wacom_led_control(struct wacom *wacom) buf[4] = wacom->led.img_lum; } - retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_LED_CONTROL, buf, 9, WAC_CMD_RETRIES); + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 9, + WAC_CMD_RETRIES); kfree(buf); return retval; @@ -541,8 +541,8 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id, /* Send 'start' command */ buf[0] = WAC_CMD_ICON_START; buf[1] = 1; - retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - WAC_CMD_ICON_START, buf, 2, WAC_CMD_RETRIES); + retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2, + WAC_CMD_RETRIES); if (retval < 0) goto out; @@ -553,8 +553,7 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id, memcpy(buf + 3, img + i * chunk_len, chunk_len); retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, - xfer_id, buf, chunk_len + 3, - WAC_CMD_RETRIES); + buf, chunk_len + 3, WAC_CMD_RETRIES); if (retval < 0) break; } @@ -562,8 +561,8 @@ static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id, /* Send 'stop' */ buf[0] = WAC_CMD_ICON_START; buf[1] = 0; - wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, WAC_CMD_ICON_START, - buf, 2, WAC_CMD_RETRIES); + wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2, + WAC_CMD_RETRIES); out: kfree(buf); -- cgit v0.10.2 From 1c3c52354046bae6d2b596d3ae9ff67be4e78250 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 14:04:23 -0700 Subject: Input: wacom - add copyright note and bump version to 2.0 Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index 0b89ee7..8cc4406 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -12,6 +12,7 @@ * Copyright (c) 2001 Frederic Lepied * Copyright (c) 2004 Panagiotis Issaris * Copyright (c) 2002-2011 Ping Cheng + * Copyright (c) 2014 Benjamin Tissoires * * ChangeLog: * v0.1 (vp) - Initial release @@ -72,6 +73,8 @@ * v1.52 (pc) - Query Wacom data upon system resume * - add defines for features->type * - add new devices (0x9F, 0xE2, and 0XE3) + * v2.00 (bt) - conversion to a HID driver + * - integration of the Bluetooth devices */ /* @@ -93,7 +96,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.53" +#define DRIVER_VERSION "v2.00" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom tablet driver" #define DRIVER_LICENSE "GPL" -- cgit v0.10.2 From 7403a6a448c3ed96221bb46c9da75254fd87b520 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 14:06:26 -0700 Subject: Input: HID - remove hid-wacom Bluetooth driver Bluetooth Wacom tablets are now handled by the regular wacom.ko driver. Remove the now useless hid-wacom driver. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Tested-by: Przemo Firszt Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 64366f1..4ed682c 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -748,21 +748,13 @@ config THRUSTMASTER_FF Rumble Force or Force Feedback Wheel. config HID_WACOM - tristate "Wacom Bluetooth devices support" - depends on HID - depends on LEDS_CLASS - select POWER_SUPPLY - ---help--- - Support for Wacom Graphire Bluetooth and Intuos4 WL tablets. - -config HID_USB_WACOM tristate "Wacom Intuos/Graphire tablet support (USB)" depends on HID select POWER_SUPPLY select NEW_LEDS select LEDS_CLASS help - Say Y here if you want to use the USB version of the Wacom Intuos + Say Y here if you want to use the USB or BT version of the Wacom Intuos or Graphire tablet. To compile this driver as a module, choose M here: the diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 55b69ac..e38c772 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -115,10 +115,9 @@ obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o obj-$(CONFIG_HID_XINMO) += hid-xinmo.o obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o -obj-$(CONFIG_HID_WACOM) += hid-wacom.o wacom-objs := wacom_wac.o wacom_sys.o -obj-$(CONFIG_HID_USB_WACOM) += wacom.o +obj-$(CONFIG_HID_WACOM) += wacom.o obj-$(CONFIG_HID_WALTOP) += hid-waltop.o obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o obj-$(CONFIG_HID_SENSOR_HUB) += hid-sensor-hub.o diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c deleted file mode 100644 index db2d07d..0000000 --- a/drivers/hid/hid-wacom.c +++ /dev/null @@ -1,971 +0,0 @@ -/* - * Bluetooth Wacom Tablet support - * - * Copyright (c) 1999 Andreas Gal - * Copyright (c) 2000-2005 Vojtech Pavlik - * Copyright (c) 2005 Michael Haboustak for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina - * Copyright (c) 2008 Jiri Slaby - * Copyright (c) 2006 Andrew Zabolotny - * Copyright (c) 2009 Bastien Nocera - * Copyright (c) 2011 Przemysław Firszt - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include - -#include "hid-ids.h" - -#define PAD_DEVICE_ID 0x0F - -#define WAC_CMD_LED_CONTROL 0x20 -#define WAC_CMD_ICON_START_STOP 0x21 -#define WAC_CMD_ICON_TRANSFER 0x26 - -struct wacom_data { - __u16 tool; - __u16 butstate; - __u8 whlstate; - __u8 features; - __u32 id; - __u32 serial; - unsigned char high_speed; - __u8 battery_capacity; - __u8 power_raw; - __u8 ps_connected; - __u8 bat_charging; - struct power_supply battery; - struct power_supply ac; - __u8 led_selector; - struct led_classdev *leds[4]; -}; - -/*percent of battery capacity for Graphire - 8th value means AC online and show 100% capacity */ -static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; -/*percent of battery capacity for Intuos4 WL, AC has a separate bit*/ -static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 }; - -static enum power_supply_property wacom_battery_props[] = { - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_CAPACITY, - POWER_SUPPLY_PROP_SCOPE, - POWER_SUPPLY_PROP_STATUS, -}; - -static enum power_supply_property wacom_ac_props[] = { - POWER_SUPPLY_PROP_PRESENT, - POWER_SUPPLY_PROP_ONLINE, - POWER_SUPPLY_PROP_SCOPE, -}; - -static void wacom_scramble(__u8 *image) -{ - __u16 mask; - __u16 s1; - __u16 s2; - __u16 r1 ; - __u16 r2 ; - __u16 r; - __u8 buf[256]; - int i, w, x, y, z; - - for (x = 0; x < 32; x++) { - for (y = 0; y < 8; y++) - buf[(8 * x) + (7 - y)] = image[(8 * x) + y]; - } - - /* Change 76543210 into GECA6420 as required by Intuos4 WL - * HGFEDCBA HFDB7531 - */ - for (x = 0; x < 4; x++) { - for (y = 0; y < 4; y++) { - for (z = 0; z < 8; z++) { - mask = 0x0001; - r1 = 0; - r2 = 0; - i = (x << 6) + (y << 4) + z; - s1 = buf[i]; - s2 = buf[i+8]; - for (w = 0; w < 8; w++) { - r1 |= (s1 & mask); - r2 |= (s2 & mask); - s1 <<= 1; - s2 <<= 1; - mask <<= 2; - } - r = r1 | (r2 << 1); - i = (x << 6) + (y << 4) + (z << 1); - image[i] = 0xFF & r; - image[i+1] = (0xFF00 & r) >> 8; - } - } - } -} - -static void wacom_set_image(struct hid_device *hdev, const char *image, - __u8 icon_no) -{ - __u8 rep_data[68]; - __u8 p[256]; - int ret, i, j; - - for (i = 0; i < 256; i++) - p[i] = image[i]; - - rep_data[0] = WAC_CMD_ICON_START_STOP; - rep_data[1] = 0; - ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, - HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - if (ret < 0) - goto err; - - rep_data[0] = WAC_CMD_ICON_TRANSFER; - rep_data[1] = icon_no & 0x07; - - wacom_scramble(p); - - for (i = 0; i < 4; i++) { - for (j = 0; j < 64; j++) - rep_data[j + 3] = p[(i << 6) + j]; - - rep_data[2] = i; - ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 67, - HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - } - - rep_data[0] = WAC_CMD_ICON_START_STOP; - rep_data[1] = 0; - - ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, - HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - -err: - return; -} - -static void wacom_leds_set_brightness(struct led_classdev *led_dev, - enum led_brightness value) -{ - struct device *dev = led_dev->dev->parent; - struct hid_device *hdev; - struct wacom_data *wdata; - unsigned char *buf; - __u8 led = 0; - int i; - - hdev = container_of(dev, struct hid_device, dev); - wdata = hid_get_drvdata(hdev); - for (i = 0; i < 4; ++i) { - if (wdata->leds[i] == led_dev) - wdata->led_selector = i; - } - - led = wdata->led_selector | 0x04; - buf = kzalloc(9, GFP_KERNEL); - if (buf) { - buf[0] = WAC_CMD_LED_CONTROL; - buf[1] = led; - buf[2] = value >> 2; - buf[3] = value; - /* use fixed brightness for OLEDs */ - buf[4] = 0x08; - hid_hw_raw_request(hdev, buf[0], buf, 9, HID_FEATURE_REPORT, - HID_REQ_SET_REPORT); - kfree(buf); - } - - return; -} - -static enum led_brightness wacom_leds_get_brightness(struct led_classdev *led_dev) -{ - struct wacom_data *wdata; - struct device *dev = led_dev->dev->parent; - int value = 0; - int i; - - wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); - - for (i = 0; i < 4; ++i) { - if (wdata->leds[i] == led_dev) { - value = wdata->leds[i]->brightness; - break; - } - } - - return value; -} - - -static int wacom_initialize_leds(struct hid_device *hdev) -{ - struct wacom_data *wdata = hid_get_drvdata(hdev); - struct led_classdev *led; - struct device *dev = &hdev->dev; - size_t namesz = strlen(dev_name(dev)) + 12; - char *name; - int i, ret; - - wdata->led_selector = 0; - - for (i = 0; i < 4; i++) { - led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL); - if (!led) { - hid_warn(hdev, - "can't allocate memory for LED selector\n"); - ret = -ENOMEM; - goto err; - } - - name = (void *)&led[1]; - snprintf(name, namesz, "%s:selector:%d", dev_name(dev), i); - led->name = name; - led->brightness = 0; - led->max_brightness = 127; - led->brightness_get = wacom_leds_get_brightness; - led->brightness_set = wacom_leds_set_brightness; - - wdata->leds[i] = led; - - ret = led_classdev_register(dev, wdata->leds[i]); - - if (ret) { - wdata->leds[i] = NULL; - kfree(led); - hid_warn(hdev, "can't register LED\n"); - goto err; - } - } - -err: - return ret; -} - -static void wacom_destroy_leds(struct hid_device *hdev) -{ - struct wacom_data *wdata = hid_get_drvdata(hdev); - struct led_classdev *led; - int i; - - for (i = 0; i < 4; ++i) { - if (wdata->leds[i]) { - led = wdata->leds[i]; - wdata->leds[i] = NULL; - led_classdev_unregister(led); - kfree(led); - } - } - -} - -static int wacom_battery_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct wacom_data *wdata = container_of(psy, - struct wacom_data, battery); - int ret = 0; - - switch (psp) { - case POWER_SUPPLY_PROP_PRESENT: - val->intval = 1; - break; - case POWER_SUPPLY_PROP_SCOPE: - val->intval = POWER_SUPPLY_SCOPE_DEVICE; - break; - case POWER_SUPPLY_PROP_CAPACITY: - val->intval = wdata->battery_capacity; - break; - case POWER_SUPPLY_PROP_STATUS: - if (wdata->bat_charging) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else - if (wdata->battery_capacity == 100 && wdata->ps_connected) - val->intval = POWER_SUPPLY_STATUS_FULL; - else - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - break; - default: - ret = -EINVAL; - break; - } - return ret; -} - -static int wacom_ac_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct wacom_data *wdata = container_of(psy, struct wacom_data, ac); - int ret = 0; - - switch (psp) { - case POWER_SUPPLY_PROP_PRESENT: - /* fall through */ - case POWER_SUPPLY_PROP_ONLINE: - val->intval = wdata->ps_connected; - break; - case POWER_SUPPLY_PROP_SCOPE: - val->intval = POWER_SUPPLY_SCOPE_DEVICE; - break; - default: - ret = -EINVAL; - break; - } - return ret; -} - -static void wacom_set_features(struct hid_device *hdev, u8 speed) -{ - struct wacom_data *wdata = hid_get_drvdata(hdev); - int limit, ret; - __u8 rep_data[2]; - - switch (hdev->product) { - case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: - rep_data[0] = 0x03 ; rep_data[1] = 0x00; - limit = 3; - do { - ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, - HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - } while (ret < 0 && limit-- > 0); - - if (ret >= 0) { - if (speed == 0) - rep_data[0] = 0x05; - else - rep_data[0] = 0x06; - - rep_data[1] = 0x00; - limit = 3; - do { - ret = hid_hw_raw_request(hdev, rep_data[0], - rep_data, 2, HID_FEATURE_REPORT, - HID_REQ_SET_REPORT); - } while (ret < 0 && limit-- > 0); - - if (ret >= 0) { - wdata->high_speed = speed; - return; - } - } - - /* - * Note that if the raw queries fail, it's not a hard failure - * and it is safe to continue - */ - hid_warn(hdev, "failed to poke device, command %d, err %d\n", - rep_data[0], ret); - break; - case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: - if (speed == 1) - wdata->features &= ~0x20; - else - wdata->features |= 0x20; - - rep_data[0] = 0x03; - rep_data[1] = wdata->features; - - ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, - HID_FEATURE_REPORT, HID_REQ_SET_REPORT); - if (ret >= 0) - wdata->high_speed = speed; - break; - } - - return; -} - -static ssize_t wacom_show_speed(struct device *dev, - struct device_attribute - *attr, char *buf) -{ - struct wacom_data *wdata = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed); -} - -static ssize_t wacom_store_speed(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct hid_device *hdev = container_of(dev, struct hid_device, dev); - int new_speed; - - if (sscanf(buf, "%1d", &new_speed ) != 1) - return -EINVAL; - - if (new_speed == 0 || new_speed == 1) { - wacom_set_features(hdev, new_speed); - return strnlen(buf, PAGE_SIZE); - } else - return -EINVAL; -} - -static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP, - wacom_show_speed, wacom_store_speed); - -#define WACOM_STORE(OLED_ID) \ -static ssize_t wacom_oled##OLED_ID##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct hid_device *hdev = container_of(dev, struct hid_device, \ - dev); \ - \ - if (count != 256) \ - return -EINVAL; \ - \ - wacom_set_image(hdev, buf, OLED_ID); \ - \ - return count; \ -} \ - \ -static DEVICE_ATTR(oled##OLED_ID##_img, S_IWUSR | S_IWGRP, NULL, \ - wacom_oled##OLED_ID##_store) - -WACOM_STORE(0); -WACOM_STORE(1); -WACOM_STORE(2); -WACOM_STORE(3); -WACOM_STORE(4); -WACOM_STORE(5); -WACOM_STORE(6); -WACOM_STORE(7); - -static int wacom_gr_parse_report(struct hid_device *hdev, - struct wacom_data *wdata, - struct input_dev *input, unsigned char *data) -{ - int tool, x, y, rw; - - tool = 0; - /* Get X & Y positions */ - x = le16_to_cpu(*(__le16 *) &data[2]); - y = le16_to_cpu(*(__le16 *) &data[4]); - - /* Get current tool identifier */ - if (data[1] & 0x90) { /* If pen is in the in/active area */ - switch ((data[1] >> 5) & 3) { - case 0: /* Pen */ - tool = BTN_TOOL_PEN; - break; - - case 1: /* Rubber */ - tool = BTN_TOOL_RUBBER; - break; - - case 2: /* Mouse with wheel */ - case 3: /* Mouse without wheel */ - tool = BTN_TOOL_MOUSE; - break; - } - - /* Reset tool if out of active tablet area */ - if (!(data[1] & 0x10)) - tool = 0; - } - - /* If tool changed, notify input subsystem */ - if (wdata->tool != tool) { - if (wdata->tool) { - /* Completely reset old tool state */ - if (wdata->tool == BTN_TOOL_MOUSE) { - input_report_key(input, BTN_LEFT, 0); - input_report_key(input, BTN_RIGHT, 0); - input_report_key(input, BTN_MIDDLE, 0); - input_report_abs(input, ABS_DISTANCE, - input_abs_get_max(input, ABS_DISTANCE)); - } else { - input_report_key(input, BTN_TOUCH, 0); - input_report_key(input, BTN_STYLUS, 0); - input_report_key(input, BTN_STYLUS2, 0); - input_report_abs(input, ABS_PRESSURE, 0); - } - input_report_key(input, wdata->tool, 0); - input_sync(input); - } - wdata->tool = tool; - if (tool) - input_report_key(input, tool, 1); - } - - if (tool) { - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); - - switch ((data[1] >> 5) & 3) { - case 2: /* Mouse with wheel */ - input_report_key(input, BTN_MIDDLE, data[1] & 0x04); - rw = (data[6] & 0x01) ? -1 : - (data[6] & 0x02) ? 1 : 0; - input_report_rel(input, REL_WHEEL, rw); - /* fall through */ - - case 3: /* Mouse without wheel */ - input_report_key(input, BTN_LEFT, data[1] & 0x01); - input_report_key(input, BTN_RIGHT, data[1] & 0x02); - /* Compute distance between mouse and tablet */ - rw = 44 - (data[6] >> 2); - if (rw < 0) - rw = 0; - else if (rw > 31) - rw = 31; - input_report_abs(input, ABS_DISTANCE, rw); - break; - - default: - input_report_abs(input, ABS_PRESSURE, - data[6] | (((__u16) (data[1] & 0x08)) << 5)); - input_report_key(input, BTN_TOUCH, data[1] & 0x01); - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04); - break; - } - - input_sync(input); - } - - /* Report the state of the two buttons at the top of the tablet - * as two extra fingerpad keys (buttons 4 & 5). */ - rw = data[7] & 0x03; - if (rw != wdata->butstate) { - wdata->butstate = rw; - input_report_key(input, BTN_0, rw & 0x02); - input_report_key(input, BTN_1, rw & 0x01); - input_report_key(input, BTN_TOOL_FINGER, 0xf0); - input_event(input, EV_MSC, MSC_SERIAL, 0xf0); - input_sync(input); - } - - /* Store current battery capacity and power supply state*/ - rw = (data[7] >> 2 & 0x07); - if (rw != wdata->power_raw) { - wdata->power_raw = rw; - wdata->battery_capacity = batcap_gr[rw]; - if (rw == 7) - wdata->ps_connected = 1; - else - wdata->ps_connected = 0; - } - return 1; -} - -static void wacom_i4_parse_button_report(struct wacom_data *wdata, - struct input_dev *input, unsigned char *data) -{ - __u16 new_butstate; - __u8 new_whlstate; - __u8 sync = 0; - - new_whlstate = data[1]; - if (new_whlstate != wdata->whlstate) { - wdata->whlstate = new_whlstate; - if (new_whlstate & 0x80) { - input_report_key(input, BTN_TOUCH, 1); - input_report_abs(input, ABS_WHEEL, (new_whlstate & 0x7f)); - input_report_key(input, BTN_TOOL_FINGER, 1); - } else { - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_WHEEL, 0); - input_report_key(input, BTN_TOOL_FINGER, 0); - } - sync = 1; - } - - new_butstate = (data[3] << 1) | (data[2] & 0x01); - if (new_butstate != wdata->butstate) { - wdata->butstate = new_butstate; - input_report_key(input, BTN_0, new_butstate & 0x001); - input_report_key(input, BTN_1, new_butstate & 0x002); - input_report_key(input, BTN_2, new_butstate & 0x004); - input_report_key(input, BTN_3, new_butstate & 0x008); - input_report_key(input, BTN_4, new_butstate & 0x010); - input_report_key(input, BTN_5, new_butstate & 0x020); - input_report_key(input, BTN_6, new_butstate & 0x040); - input_report_key(input, BTN_7, new_butstate & 0x080); - input_report_key(input, BTN_8, new_butstate & 0x100); - input_report_key(input, BTN_TOOL_FINGER, 1); - sync = 1; - } - - if (sync) { - input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); - input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff); - input_sync(input); - } -} - -static void wacom_i4_parse_pen_report(struct wacom_data *wdata, - struct input_dev *input, unsigned char *data) -{ - __u16 x, y, pressure; - __u8 distance; - __u8 tilt_x, tilt_y; - - switch (data[1]) { - case 0x80: /* Out of proximity report */ - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_report_key(input, BTN_STYLUS, 0); - input_report_key(input, BTN_STYLUS2, 0); - input_report_key(input, wdata->tool, 0); - input_report_abs(input, ABS_MISC, 0); - input_event(input, EV_MSC, MSC_SERIAL, wdata->serial); - wdata->tool = 0; - input_sync(input); - break; - case 0xC2: /* Tool report */ - wdata->id = ((data[2] << 4) | (data[3] >> 4) | - ((data[7] & 0x0f) << 20) | - ((data[8] & 0xf0) << 12)); - wdata->serial = ((data[3] & 0x0f) << 28) + - (data[4] << 20) + (data[5] << 12) + - (data[6] << 4) + (data[7] >> 4); - - switch (wdata->id) { - case 0x100802: - wdata->tool = BTN_TOOL_PEN; - break; - case 0x10080A: - wdata->tool = BTN_TOOL_RUBBER; - break; - } - break; - default: /* Position/pressure report */ - x = data[2] << 9 | data[3] << 1 | ((data[9] & 0x02) >> 1); - y = data[4] << 9 | data[5] << 1 | (data[9] & 0x01); - pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5) - | (data[1] & 0x01); - distance = (data[9] >> 2) & 0x3f; - tilt_x = ((data[7] << 1) & 0x7e) | (data[8] >> 7); - tilt_y = data[8] & 0x7f; - - input_report_key(input, BTN_TOUCH, pressure > 1); - - input_report_key(input, BTN_STYLUS, data[1] & 0x02); - input_report_key(input, BTN_STYLUS2, data[1] & 0x04); - input_report_key(input, wdata->tool, 1); - input_report_abs(input, ABS_X, x); - input_report_abs(input, ABS_Y, y); - input_report_abs(input, ABS_PRESSURE, pressure); - input_report_abs(input, ABS_DISTANCE, distance); - input_report_abs(input, ABS_TILT_X, tilt_x); - input_report_abs(input, ABS_TILT_Y, tilt_y); - input_report_abs(input, ABS_MISC, wdata->id); - input_event(input, EV_MSC, MSC_SERIAL, wdata->serial); - input_report_key(input, wdata->tool, 1); - input_sync(input); - break; - } - - return; -} - -static void wacom_i4_parse_report(struct hid_device *hdev, - struct wacom_data *wdata, - struct input_dev *input, unsigned char *data) -{ - switch (data[0]) { - case 0x00: /* Empty report */ - break; - case 0x02: /* Pen report */ - wacom_i4_parse_pen_report(wdata, input, data); - break; - case 0x03: /* Features Report */ - wdata->features = data[2]; - break; - case 0x0C: /* Button report */ - wacom_i4_parse_button_report(wdata, input, data); - break; - default: - hid_err(hdev, "Unknown report: %d,%d\n", data[0], data[1]); - break; - } -} - -static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ - struct wacom_data *wdata = hid_get_drvdata(hdev); - struct hid_input *hidinput; - struct input_dev *input; - unsigned char *data = (unsigned char *) raw_data; - int i; - __u8 power_raw; - - if (!(hdev->claimed & HID_CLAIMED_INPUT)) - return 0; - - hidinput = list_entry(hdev->inputs.next, struct hid_input, list); - input = hidinput->input; - - switch (hdev->product) { - case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: - if (data[0] == 0x03) { - return wacom_gr_parse_report(hdev, wdata, input, data); - } else { - hid_err(hdev, "Unknown report: %d,%d size:%d\n", - data[0], data[1], size); - return 0; - } - break; - case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: - i = 1; - - switch (data[0]) { - case 0x04: - wacom_i4_parse_report(hdev, wdata, input, data + i); - i += 10; - /* fall through */ - case 0x03: - wacom_i4_parse_report(hdev, wdata, input, data + i); - i += 10; - wacom_i4_parse_report(hdev, wdata, input, data + i); - power_raw = data[i+10]; - if (power_raw != wdata->power_raw) { - wdata->power_raw = power_raw; - wdata->battery_capacity = batcap_i4[power_raw & 0x07]; - wdata->bat_charging = (power_raw & 0x08) ? 1 : 0; - wdata->ps_connected = (power_raw & 0x10) ? 1 : 0; - } - - break; - default: - hid_err(hdev, "Unknown report: %d,%d size:%d\n", - data[0], data[1], size); - return 0; - } - } - return 1; -} - -static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, unsigned long **bit, - int *max) -{ - struct input_dev *input = hi->input; - - __set_bit(INPUT_PROP_POINTER, input->propbit); - - /* Basics */ - input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); - - __set_bit(REL_WHEEL, input->relbit); - - __set_bit(BTN_TOOL_PEN, input->keybit); - __set_bit(BTN_TOUCH, input->keybit); - __set_bit(BTN_STYLUS, input->keybit); - __set_bit(BTN_STYLUS2, input->keybit); - __set_bit(BTN_LEFT, input->keybit); - __set_bit(BTN_RIGHT, input->keybit); - __set_bit(BTN_MIDDLE, input->keybit); - - /* Pad */ - input_set_capability(input, EV_MSC, MSC_SERIAL); - - __set_bit(BTN_0, input->keybit); - __set_bit(BTN_1, input->keybit); - __set_bit(BTN_TOOL_FINGER, input->keybit); - - /* Distance, rubber and mouse */ - __set_bit(BTN_TOOL_RUBBER, input->keybit); - __set_bit(BTN_TOOL_MOUSE, input->keybit); - - switch (hdev->product) { - case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH: - input_set_abs_params(input, ABS_X, 0, 16704, 4, 0); - input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0); - input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0); - break; - case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: - __set_bit(ABS_WHEEL, input->absbit); - __set_bit(ABS_MISC, input->absbit); - __set_bit(BTN_2, input->keybit); - __set_bit(BTN_3, input->keybit); - __set_bit(BTN_4, input->keybit); - __set_bit(BTN_5, input->keybit); - __set_bit(BTN_6, input->keybit); - __set_bit(BTN_7, input->keybit); - __set_bit(BTN_8, input->keybit); - input_set_abs_params(input, ABS_WHEEL, 0, 71, 0, 0); - input_set_abs_params(input, ABS_X, 0, 40640, 4, 0); - input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0); - input_set_abs_params(input, ABS_DISTANCE, 0, 63, 0, 0); - input_set_abs_params(input, ABS_TILT_X, 0, 127, 0, 0); - input_set_abs_params(input, ABS_TILT_Y, 0, 127, 0, 0); - break; - } - - return 0; -} - -static int wacom_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - struct wacom_data *wdata; - int ret; - - wdata = kzalloc(sizeof(*wdata), GFP_KERNEL); - if (wdata == NULL) { - hid_err(hdev, "can't alloc wacom descriptor\n"); - return -ENOMEM; - } - - hid_set_drvdata(hdev, wdata); - - /* Parse the HID report now */ - ret = hid_parse(hdev); - if (ret) { - hid_err(hdev, "parse failed\n"); - goto err_free; - } - - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - if (ret) { - hid_err(hdev, "hw start failed\n"); - goto err_free; - } - - ret = device_create_file(&hdev->dev, &dev_attr_speed); - if (ret) - hid_warn(hdev, - "can't create sysfs speed attribute err: %d\n", ret); - -#define OLED_INIT(OLED_ID) \ - do { \ - ret = device_create_file(&hdev->dev, \ - &dev_attr_oled##OLED_ID##_img); \ - if (ret) \ - hid_warn(hdev, \ - "can't create sysfs oled attribute, err: %d\n", ret);\ - } while (0) - -OLED_INIT(0); -OLED_INIT(1); -OLED_INIT(2); -OLED_INIT(3); -OLED_INIT(4); -OLED_INIT(5); -OLED_INIT(6); -OLED_INIT(7); - - wdata->features = 0; - wacom_set_features(hdev, 1); - - if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) { - sprintf(hdev->name, "%s", "Wacom Intuos4 WL"); - ret = wacom_initialize_leds(hdev); - if (ret) - hid_warn(hdev, - "can't create led attribute, err: %d\n", ret); - } - - wdata->battery.properties = wacom_battery_props; - wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props); - wdata->battery.get_property = wacom_battery_get_property; - wdata->battery.name = "wacom_battery"; - wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY; - wdata->battery.use_for_apm = 0; - - - ret = power_supply_register(&hdev->dev, &wdata->battery); - if (ret) { - hid_err(hdev, "can't create sysfs battery attribute, err: %d\n", - ret); - goto err_battery; - } - - power_supply_powers(&wdata->battery, &hdev->dev); - - wdata->ac.properties = wacom_ac_props; - wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props); - wdata->ac.get_property = wacom_ac_get_property; - wdata->ac.name = "wacom_ac"; - wdata->ac.type = POWER_SUPPLY_TYPE_MAINS; - wdata->ac.use_for_apm = 0; - - ret = power_supply_register(&hdev->dev, &wdata->ac); - if (ret) { - hid_err(hdev, - "can't create ac battery attribute, err: %d\n", ret); - goto err_ac; - } - - power_supply_powers(&wdata->ac, &hdev->dev); - return 0; - -err_ac: - power_supply_unregister(&wdata->battery); -err_battery: - wacom_destroy_leds(hdev); - device_remove_file(&hdev->dev, &dev_attr_oled0_img); - device_remove_file(&hdev->dev, &dev_attr_oled1_img); - device_remove_file(&hdev->dev, &dev_attr_oled2_img); - device_remove_file(&hdev->dev, &dev_attr_oled3_img); - device_remove_file(&hdev->dev, &dev_attr_oled4_img); - device_remove_file(&hdev->dev, &dev_attr_oled5_img); - device_remove_file(&hdev->dev, &dev_attr_oled6_img); - device_remove_file(&hdev->dev, &dev_attr_oled7_img); - device_remove_file(&hdev->dev, &dev_attr_speed); - hid_hw_stop(hdev); -err_free: - kfree(wdata); - return ret; -} - -static void wacom_remove(struct hid_device *hdev) -{ - struct wacom_data *wdata = hid_get_drvdata(hdev); - - wacom_destroy_leds(hdev); - device_remove_file(&hdev->dev, &dev_attr_oled0_img); - device_remove_file(&hdev->dev, &dev_attr_oled1_img); - device_remove_file(&hdev->dev, &dev_attr_oled2_img); - device_remove_file(&hdev->dev, &dev_attr_oled3_img); - device_remove_file(&hdev->dev, &dev_attr_oled4_img); - device_remove_file(&hdev->dev, &dev_attr_oled5_img); - device_remove_file(&hdev->dev, &dev_attr_oled6_img); - device_remove_file(&hdev->dev, &dev_attr_oled7_img); - device_remove_file(&hdev->dev, &dev_attr_speed); - hid_hw_stop(hdev); - - power_supply_unregister(&wdata->battery); - power_supply_unregister(&wdata->ac); - kfree(hid_get_drvdata(hdev)); -} - -static const struct hid_device_id wacom_devices[] = { - - { } -}; -MODULE_DEVICE_TABLE(hid, wacom_devices); - -static struct hid_driver wacom_driver = { - .name = "hid-wacom", - .id_table = wacom_devices, - .probe = wacom_probe, - .remove = wacom_remove, - .raw_event = wacom_raw_event, - .input_mapped = wacom_input_mapped, -}; -module_hid_driver(wacom_driver); - -MODULE_DESCRIPTION("Driver for Wacom Graphire Bluetooth and Wacom Intuos4 WL"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From f2e0a7d4a0b94b4274e3b7e15bf650d45a866f3c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 6 Aug 2014 14:07:49 -0700 Subject: Input: wacom - only register once the MODULE_* macros Putting the various MODULE_* makes them appear several times in modinfo because wacom.h is used both in wacom_sys.c and wacom_wac.h. Having the macros near the module declaration makes them appear only once. Add also MODULE_VERSION(DRIVER_VERSION) to export the current version number. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index 8cc4406..64bc1b2 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -101,10 +101,6 @@ #define DRIVER_DESC "USB Wacom tablet driver" #define DRIVER_LICENSE "GPL" -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - #define USB_VENDOR_ID_WACOM 0x056a #define USB_VENDOR_ID_LENOVO 0x17ef diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 6e0c191..3e388ec 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -1449,3 +1449,8 @@ static struct hid_driver wacom_driver = { .raw_event = wacom_raw_event, }; module_hid_driver(wacom_driver); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); -- cgit v0.10.2 From c704b4ef1a819b053fd33617e861da1932077314 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 7 Aug 2014 23:22:37 -0700 Subject: Input: wacom - update the ABI doc according to latest changes Now the devices show up under hid no matter the connection (for USB and Bluetooth, not serial nor i2c). The USB devices can now be easily found under /sys/bus/hid/devices/::. The Bluetooth devices could also be found under this path since their inclusion (April 2010), so this patch fixes the non-precise "hidraw*" path for them. The ABI has been unified while setting the LEDs and OLEDs. So Bluetooth devices lost their own LED selector but use the USB sysfs attribute. For OLEDs, Bluetooth devices handle only 1-bit images instead of 4 for USB. The documentation has been updated to match this. Signed-off-by: Benjamin Tissoires Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 7fc7810..c4f0fed 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -1,48 +1,27 @@ -WWhat: /sys/class/hidraw/hidraw*/device/oled*_img -Date: June 2012 -Contact: linux-bluetooth@vger.kernel.org -Description: - The /sys/class/hidraw/hidraw*/device/oled*_img files control - OLED mocro displays on Intuos4 Wireless tablet. Accepted image - has to contain 256 bytes (64x32 px 1 bit colour). The format - is the same as PBM image 62x32px without header (64 bits per - horizontal line, 32 lines). An example of setting OLED No. 0: - dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img - The attribute is read only and no local copy of the image is - stored. - -What: /sys/class/hidraw/hidraw*/device/speed +What: /sys/bus/hid/devices/::./speed Date: April 2010 Kernel Version: 2.6.35 Contact: linux-bluetooth@vger.kernel.org Description: - The /sys/class/hidraw/hidraw*/device/speed file controls - reporting speed of Wacom bluetooth tablet. Reading from - this file returns 1 if tablet reports in high speed mode + The /sys/bus/hid/devices/::./speed file + controls reporting speed of Wacom bluetooth tablet. Reading + from this file returns 1 if tablet reports in high speed mode or 0 otherwise. Writing to this file one of these values switches reporting speed. -What: /sys/class/leds/0005\:056A\:00BD.0001\:selector\:*/ -Date: May 2012 -Kernel Version: 3.5 -Contact: linux-bluetooth@vger.kernel.org -Description: - LED selector for Intuos4 WL. There are 4 leds, but only one LED - can be lit at a time. Max brightness is 127. - -What: /sys/bus/usb/devices/-:./wacom_led/led -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/led +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Attribute group for control of the status LEDs and the OLEDs. This attribute group is only available for Intuos 4 M, L, - and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq - 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence - implicitly signifies the presence of said LEDs and OLEDs on the - tablet device. + and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only), + Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD + (LEDs only). Therefore its presence implicitly signifies the + presence of said LEDs and OLEDs on the tablet device. -What: /sys/bus/usb/devices/-:./wacom_led/status0_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status0_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the status LED luminance (1..127) @@ -50,16 +29,16 @@ Description: button is pressed on the stylus. This luminance level is normally lower than the level when a button is pressed. -What: /sys/bus/usb/devices/-:./wacom_led/status1_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status1_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the status LED luminance (1..127) when the stylus touches the tablet surface, or any button is pressed on the stylus. -What: /sys/bus/usb/devices/-:./wacom_led/status_led0_select -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status_led0_select +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets which one of the four (for Intuos 4 @@ -67,23 +46,23 @@ Description: 24HD) status LEDs is active (0..3). The other three LEDs on the same side are always inactive. -What: /sys/bus/usb/devices/-:./wacom_led/status_led1_select -Date: September 2011 +What: /sys/bus/hid/devices/::./wacom_led/status_led1_select +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets which one of the left four (for Cintiq 21UX2 and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on the left are always inactive. -What: /sys/bus/usb/devices/-:./wacom_led/buttons_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/buttons_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the overall luminance level (0..15) of all eight button OLED displays. -What: /sys/bus/usb/devices/-:./wacom_led/button_rawimg -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/button_rawimg +Date: August 2014 Contact: linux-input@vger.kernel.org Description: When writing a 1024 byte raw image in Wacom Intuos 4 @@ -93,3 +72,8 @@ Description: byte chunk encodes the image data for two consecutive lines on the display. The low nibble of each byte contains the first line, and the high nibble contains the second line. + When the Wacom Intuos 4 is connected over Bluetooth, the + image has to contain 256 bytes (64x32 px 1 bit colour). + The format is also scrambled, like in the USB mode, and it can + be summarized by converting 76543210 into GECA6420. + HGFEDCBA HFDB7531 -- cgit v0.10.2