From 1f61cab8a729e00af77b51b44c3a8dc8ef3b3eb9 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 8 Jun 2015 11:15:23 -0700 Subject: hwmon: (pmbus) Add support for MAX20751 MAX20751 is a multiphase power controller with internal buck converter. It uses VR12.0 to report the output voltage. This requires an explicit driver, since the VR version can not be auto-detected. The chip supports a manufacturer specific command to fine-tune the output voltage. This command is not currently supported. Signed-off-by: Guenter Roeck diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751 new file mode 100644 index 0000000..f9fa25e --- /dev/null +++ b/Documentation/hwmon/max20751 @@ -0,0 +1,77 @@ +Kernel driver max20751 +====================== + +Supported chips: + * maxim MAX20751 + Prefix: 'max20751' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf + Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf + +Author: Guenter Roeck + + +Description +----------- + +This driver supports MAX20751 Multiphase Master with PMBus Interface +and Internal Buck Converter. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. + +in1_label "vin1" +in1_input Measured voltage. +in1_min Minimum input voltage. +in1_max Maximum input voltage. +in1_lcrit Critical minimum input voltage. +in1_crit Critical maximum input voltage. +in1_min_alarm Input voltage low alarm. +in1_lcrit_alarm Input voltage critical low alarm. +in1_min_alarm Input voltage low alarm. +in1_max_alarm Input voltage high alarm. + +in2_label "vout1" +in2_input Measured voltage. +in2_min Minimum output voltage. +in2_max Maximum output voltage. +in2_lcrit Critical minimum output voltage. +in2_crit Critical maximum output voltage. +in2_min_alarm Output voltage low alarm. +in2_lcrit_alarm Output voltage critical low alarm. +in2_min_alarm Output voltage low alarm. +in2_max_alarm Output voltage high alarm. + +curr1_input Measured output current. +curr1_label "iout1" +curr1_max Maximum output current. +curr1_alarm Current high alarm. + +temp1_input Measured temperature. +temp1_max Maximum temperature. +temp1_crit Critical high temperature. +temp1_max_alarm Chip temperature high alarm. +temp1_crit_alarm Chip temperature critical high alarm. + +power1_input Output power. +power1_label "pout1" diff --git a/MAINTAINERS b/MAINTAINERS index a9ae6c1..6a406b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6539,6 +6539,13 @@ S: Maintained F: Documentation/hwmon/max16065 F: drivers/hwmon/max16065.c +MAX20751 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/max20751 +F: drivers/hwmon/max20751.c + MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER M: "Hans J. Koch" L: lm-sensors@lm-sensors.org diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 67901cb..6e1e6fe 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -73,6 +73,16 @@ config SENSORS_MAX16064 This driver can also be built as a module. If so, the module will be called max16064. +config SENSORS_MAX20751 + tristate "Maxim MAX20751" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX20751. + + This driver can also be built as a module. If so, the module will + be called max20751. + config SENSORS_MAX34440 tristate "Maxim MAX34440 and compatibles" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 1454293..bce046d 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o +obj-$(CONFIG_SENSORS_MAX20751) += max20751.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c new file mode 100644 index 0000000..ab74aea --- /dev/null +++ b/drivers/hwmon/pmbus/max20751.c @@ -0,0 +1,64 @@ +/* + * Hardware monitoring driver for Maxim MAX20751 + * + * Copyright (c) 2015 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "pmbus.h" + +static struct pmbus_driver_info max20751_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = vid, + .vrm_version = vr12, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_POUT, +}; + +static int max20751_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &max20751_info); +} + +static const struct i2c_device_id max20751_id[] = { + {"max20751", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, max20751_id); + +static struct i2c_driver max20751_driver = { + .driver = { + .name = "max20751", + }, + .probe = max20751_probe, + .remove = pmbus_do_remove, + .id_table = max20751_id, +}; + +module_i2c_driver(max20751_driver); + +MODULE_AUTHOR("Guenter Roeck "); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2