From 84fb029faa05e1de229a68829cca5dcf85c79894 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Fri, 27 Sep 2013 14:36:04 +0200 Subject: hwmon: Correct some typos Signed-off-by: LABBE Corentin Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 2ebd6ce..9c8a6ba 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -164,7 +164,7 @@ static const u8 abituguru_bank2_max_threshold = 50; static const int abituguru_pwm_settings_multiplier[5] = { 0, 1, 1, 1000, 1000 }; /* * Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a - * special case the minium allowed pwm% setting for this is 30% (77) on + * special case the minimum allowed pwm% setting for this is 30% (77) on * some MB's this special case is handled in the code! */ static const u8 abituguru_pwm_min[5] = { 0, 170, 170, 25, 25 }; @@ -517,7 +517,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr); /* - * Volt sensor test, enable volt low alarm, set min value ridicously + * Volt sensor test, enable volt low alarm, set min value ridiculously * high, or vica versa if the reading is very high. If its a volt * sensor this should always give us an alarm. */ @@ -564,7 +564,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, /* * Temp sensor test, enable sensor as a temp sensor, set beep value - * ridicously low (but not too low, otherwise uguru ignores it). + * ridiculously low (but not too low, otherwise uguru ignores it). * If its a temp sensor this should always give us an alarm. */ buf[0] = ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE; diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 0cac8c0..4ae74aa8 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -176,7 +176,7 @@ struct abituguru3_data { /* * The abituguru3 supports up to 48 sensors, and thus has registers - * sets for 48 sensors, for convienence reasons / simplicity of the + * sets for 48 sensors, for convenience reasons / simplicity of the * code we always read and store all registers for all 48 sensors */ diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index b25c643..1d7ff46 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -119,7 +119,7 @@ struct atk_data { acpi_handle rtmp_handle; acpi_handle rvlt_handle; acpi_handle rfan_handle; - /* new inteface */ + /* new interface */ acpi_handle enumerate_handle; acpi_handle read_handle; acpi_handle write_handle; diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 3c16cbd..0cafc39 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -660,7 +660,7 @@ static int max6650_init_client(struct i2c_client *client) /* * If mode is set to "full off", we change it to "open loop" and * set DAC to 255, which has the same effect. We do this because - * there's no "full off" mode defined in hwmon specifcations. + * there's no "full off" mode defined in hwmon specifications. */ if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) { diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 7f9ce32..3cbf66e 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(pmbus_write_byte); /* * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if - * a device specific mapping funcion exists and calls it if necessary. + * a device specific mapping function exists and calls it if necessary. */ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value) { diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index a3feee3..bdcf2dc 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -1043,7 +1043,7 @@ static struct sensor_device_attribute sda_temp_alarm[] = { SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), }; -/* get reatime status of all sensors items: voltage, temp, fan */ +/* get realtime status of all sensors items: voltage, temp, fan */ static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) { diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 5febb43..df58580 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -579,7 +579,7 @@ static ssize_t store_temp23(struct device *dev, struct device_attribute *attr, return count; } -/* get reatime status of all sensors items: voltage, temp, fan */ +/* get realtime status of all sensors items: voltage, temp, fan */ static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) { diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index b0c30a5..b6470ec 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -808,7 +808,7 @@ show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf) if (nr == TEMP_FAN_MAP) { val = data->temp_fan_map[index]; } else if (nr == TEMP_PWM_ENABLE) { - /* +2 to transfrom into 2 and 3 to conform with sysfs intf */ + /* +2 to transform into 2 and 3 to conform with sysfs intf */ val = ((data->pwm_enable >> index) & 0x01) + 2; } else if (nr == TEMP_CRUISE) { val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f); -- cgit v0.10.2