From 79d54b249c176ba4abb9a580951400246dd974b1 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:03:59 +0200 Subject: uprobes: Do not leak UTASK_BP_HIT if find_active_uprobe() fails If handle_swbp()->find_active_uprobe() fails we return with utask->state = UTASK_BP_HIT. Change handle_swbp() to reset utask->state at the start. Note that we do this unconditionally, see the next patch(es). Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 912ef48..2c1ff05 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1468,6 +1468,10 @@ static void handle_swbp(struct pt_regs *regs) bp_vaddr = uprobe_get_swbp_addr(regs); uprobe = find_active_uprobe(bp_vaddr, &is_swbp); + utask = current->utask; + if (utask) + utask->state = UTASK_RUNNING; + if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ @@ -1486,7 +1490,6 @@ static void handle_swbp(struct pt_regs *regs) return; } - utask = current->utask; if (!utask) { utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ -- cgit v0.10.2 From 746a9e6ba24af2ccf03279c99d435a1b88ca5d17 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:23:51 +0200 Subject: uprobes: Do not setup ->active_uprobe/state prematurely handle_swbp() sets utask->active_uprobe before handler_chain(), and UTASK_SSTEP before pre_ssout(). This complicates the code for no reason, arch_ hooks or consumer->handler() should not (and can't) use this info. Change handle_swbp() to initialize them after pre_ssout(), and remove the no longer needed cleanup-utask code. Signed-off-by: Oleg Nesterov cked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 2c1ff05..41f048c 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1496,22 +1496,19 @@ static void handle_swbp(struct pt_regs *regs) if (!utask) goto cleanup_ret; } - utask->active_uprobe = uprobe; + handler_chain(uprobe, regs); if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs)) goto cleanup_ret; - utask->state = UTASK_SSTEP; if (!pre_ssout(uprobe, regs, bp_vaddr)) { arch_uprobe_enable_step(&uprobe->arch); + utask->active_uprobe = uprobe; + utask->state = UTASK_SSTEP; return; } cleanup_ret: - if (utask) { - utask->active_uprobe = NULL; - utask->state = UTASK_RUNNING; - } if (!(uprobe->flags & UPROBE_SKIP_SSTEP)) /* -- cgit v0.10.2 From 0578a97098dab967ece4b025fe5eb4984c4c86c0 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:31:23 +0200 Subject: uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp() If handle_swbp()->add_utask() fails but UPROBE_SKIP_SSTEP is set, cleanup_ret: path do not restart the insn, this is wrong. Remove this check and add the additional label for can_skip_sstep() = T case. Note also that UPROBE_SKIP_SSTEP can be false positive, we simply can not trust it unless arch_uprobe_skip_sstep() was already called. Also, move another UPROBE_SKIP_SSTEP check before can_skip_sstep() into this helper, this looks more clean and understandable. Note: probably we should rename "skip" to "emulate" and I think that "clear UPROBE_SKIP_SSTEP" should be moved to arch_can_skip. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 41f048c..d239296 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1389,10 +1389,11 @@ bool uprobe_deny_signal(void) */ static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs) { - if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) - return true; - - uprobe->flags &= ~UPROBE_SKIP_SSTEP; + if (uprobe->flags & UPROBE_SKIP_SSTEP) { + if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) + return true; + uprobe->flags &= ~UPROBE_SKIP_SSTEP; + } return false; } @@ -1494,12 +1495,12 @@ static void handle_swbp(struct pt_regs *regs) utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ if (!utask) - goto cleanup_ret; + goto restart; } handler_chain(uprobe, regs); - if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs)) - goto cleanup_ret; + if (can_skip_sstep(uprobe, regs)) + goto out; if (!pre_ssout(uprobe, regs, bp_vaddr)) { arch_uprobe_enable_step(&uprobe->arch); @@ -1508,15 +1509,13 @@ static void handle_swbp(struct pt_regs *regs) return; } -cleanup_ret: - if (!(uprobe->flags & UPROBE_SKIP_SSTEP)) - - /* - * cannot singlestep; cannot skip instruction; - * re-execute the instruction. - */ - instruction_pointer_set(regs, bp_vaddr); - +restart: + /* + * cannot singlestep; cannot skip instruction; + * re-execute the instruction. + */ + instruction_pointer_set(regs, bp_vaddr); +out: put_uprobe(uprobe); } -- cgit v0.10.2 From 1b08e907211cdc744f54871736005d9f3e7f182c Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:52:10 +0200 Subject: uprobes: Kill UTASK_BP_HIT state Kill UTASK_BP_HIT state, it buys nothing but complicates the code. It is only used in uprobe_notify_resume() to decide who should be called, we can check utask->active_uprobe != NULL instead. And this allows us to simplify handle_swbp(), no need to clear utask->state. Likewise we could kill UTASK_SSTEP, but UTASK_BP_HIT is worse and imho should die. The problem is, it creates the special case when task->utask is NULL, we can't distinguish RUNNING and BP_HIT. With this patch utask == NULL always means RUNNING. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index e6f0331..18d839d 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -59,7 +59,6 @@ struct uprobe_consumer { #ifdef CONFIG_UPROBES enum uprobe_task_state { UTASK_RUNNING, - UTASK_BP_HIT, UTASK_SSTEP, UTASK_SSTEP_ACK, UTASK_SSTEP_TRAPPED, diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index d239296..d3f5381 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1469,10 +1469,6 @@ static void handle_swbp(struct pt_regs *regs) bp_vaddr = uprobe_get_swbp_addr(regs); uprobe = find_active_uprobe(bp_vaddr, &is_swbp); - utask = current->utask; - if (utask) - utask->state = UTASK_RUNNING; - if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ @@ -1491,6 +1487,7 @@ static void handle_swbp(struct pt_regs *regs) return; } + utask = current->utask; if (!utask) { utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ @@ -1547,13 +1544,12 @@ static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs) } /* - * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag. (and on - * subsequent probe hits on the thread sets the state to UTASK_BP_HIT) and - * allows the thread to return from interrupt. + * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and + * allows the thread to return from interrupt. After that handle_swbp() + * sets utask->active_uprobe. * - * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag and - * also sets the state to UTASK_SSTEP_ACK and allows the thread to return from - * interrupt. + * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag + * and allows the thread to return from interrupt. * * While returning to userspace, thread notices the TIF_UPROBE flag and calls * uprobe_notify_resume(). @@ -1563,10 +1559,10 @@ void uprobe_notify_resume(struct pt_regs *regs) struct uprobe_task *utask; utask = current->utask; - if (!utask || utask->state == UTASK_BP_HIT) - handle_swbp(regs); - else + if (utask && utask->active_uprobe) handle_singlestep(utask, regs); + else + handle_swbp(regs); } /* @@ -1575,17 +1571,10 @@ void uprobe_notify_resume(struct pt_regs *regs) */ int uprobe_pre_sstep_notifier(struct pt_regs *regs) { - struct uprobe_task *utask; - if (!current->mm || !test_bit(MMF_HAS_UPROBES, ¤t->mm->flags)) return 0; - utask = current->utask; - if (utask) - utask->state = UTASK_BP_HIT; - set_thread_flag(TIF_UPROBE); - return 1; } -- cgit v0.10.2 From db023ea595015058270be6a62fe60a7b6b5c50d7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 19:05:46 +0200 Subject: uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume() Move clear_thread_flag(TIF_UPROBE) from do_notify_resume() to uprobe_notify_resume() for !CONFIG_UPROBES case. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index b280908..0041e5a 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -785,10 +785,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) mce_notify_process(); #endif /* CONFIG_X86_64 && CONFIG_X86_MCE */ - if (thread_info_flags & _TIF_UPROBE) { - clear_thread_flag(TIF_UPROBE); + if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); - } /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index d3f5381..198d732 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1558,6 +1558,8 @@ void uprobe_notify_resume(struct pt_regs *regs) { struct uprobe_task *utask; + clear_thread_flag(TIF_UPROBE); + utask = current->utask; if (utask && utask->active_uprobe) handle_singlestep(utask, regs); -- cgit v0.10.2 From 75ed82ea53bd0d2d8083261123576250f7ba851e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 17:20:06 +0200 Subject: uprobes: Change write_opcode() to use FOLL_FORCE write_opcode()->get_user_pages() needs FOLL_FORCE to ensure we can read the page even if the probed task did mprotect(PROT_NONE) after uprobe_register(). Without FOLL_WRITE, FOLL_FORCE doesn't have any side effect but allows to read the !VM_READ memory. Otherwiese the subsequent uprobe_unregister()->set_orig_insn() fails and we leak "int3". If that task does mprotect(PROT_READ | EXEC) and execute the probed insn later it will be killed. Note: in fact this is also needed for _register, see the next patch. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 198d732..80e8c7b 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -221,7 +221,7 @@ static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm, retry: /* Read the page with vaddr into memory */ - ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma); + ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &old_page, &vma); if (ret <= 0) return ret; -- cgit v0.10.2 From 78a320542e6cdb2800cd736b2d136e4261d34f43 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 19:07:41 +0200 Subject: uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC uprobe_register() or uprobe_mmap() requires VM_READ | VM_EXEC, this is not right. An apllication can do mprotect(PROT_EXEC) later and execute this code. Change valid_vma(is_register => true) to check VM_MAYEXEC instead. No need to check VM_MAYREAD, it is always set. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 80e8c7b..a9de408 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -106,8 +106,8 @@ static bool valid_vma(struct vm_area_struct *vma, bool is_register) if (!is_register) return true; - if ((vma->vm_flags & (VM_HUGETLB|VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)) - == (VM_READ|VM_EXEC)) + if ((vma->vm_flags & (VM_HUGETLB | VM_WRITE | VM_MAYEXEC | VM_SHARED)) + == VM_MAYEXEC) return true; return false; -- cgit v0.10.2 From e40cfce626a5537994058ee9a940dcfdc0f68ef0 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 19:31:39 +0200 Subject: uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas valid_vma(false) ignores ->vm_flags, this is not actually right. We should never try to write into MAP_SHARED mapping, this can confuse an apllication which actually writes to ->vm_file. With this patch valid_vma(false) ignores VM_WRITE only but checks other (immutable) bits checked by valid_vma(true). This can also speedup uprobe_munmap() and uprobe_unregister(). Note: even after this patch _unregister can confuse the probed application if it does mprotect(PROT_WRITE) after _register and installs "int3", but this is hardly possible to avoid and this doesn't differ from gdb case. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a9de408..8d182bd 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -100,17 +100,12 @@ struct uprobe { */ static bool valid_vma(struct vm_area_struct *vma, bool is_register) { - if (!vma->vm_file) - return false; - - if (!is_register) - return true; + vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_SHARED; - if ((vma->vm_flags & (VM_HUGETLB | VM_WRITE | VM_MAYEXEC | VM_SHARED)) - == VM_MAYEXEC) - return true; + if (is_register) + flags |= VM_WRITE; - return false; + return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC; } static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset) -- cgit v0.10.2 From e97f65a17deafacc360a4cb75ae944897ecea6d7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 19 Sep 2012 16:36:01 +0200 Subject: uprobes: Kill set_swbp()->is_swbp_at_addr() A separate patch for better documentation. set_swbp()->is_swbp_at_addr() is not needed for correctness, it is harmless to do the unnecessary __replace_page(old_page, new_page) when these 2 pages are identical. And it can not be counted as optimization. mmap/register races are very unlikely, while in the likely case is_swbp_at_addr() adds the extra get_user_pages() even if the caller is uprobe_mmap(current->mm) and returns false. Note also that the semantics/usage of is_swbp_at_addr() in uprobe.c is confusing. set_swbp() uses it to detect the case when this insn was already modified by uprobes, that is why it should always compare the opcode with UPROBE_SWBP_INSN even if the hardware (like powerpc) has other trap insns. It doesn't matter if this breakpoint was in fact installed by gdb or application itself, we are going to "steal" this breakpoint anyway and execute the original insn from vm_file even if it no longer matches the memory. OTOH, handle_swbp()->find_active_uprobe() uses is_swbp_at_addr() to figure out whether we need to send SIGTRAP or not if we can not find uprobe, so in this case it should return true for all trap variants, not only for UPROBE_SWBP_INSN. This patch removes set_swbp()->is_swbp_at_addr(), the next patches will remove it from set_orig_insn() which is similar to set_swbp() in this respect. So the only caller will be handle_swbp() and we can make its semantics clear. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 8d182bd..a4453d1 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -321,17 +321,6 @@ out: */ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - int result; - /* - * See the comment near uprobes_hash(). - */ - result = is_swbp_at_addr(mm, vaddr); - if (result == 1) - return 0; - - if (result) - return result; - return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN); } -- cgit v0.10.2 From cceb55aab73d2aea8f4d6f7414d2e1b647a3dacb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:10:18 +0200 Subject: uprobes: Introduce copy_opcode(), kill read_opcode() No functional changes, preparations. 1. Extract the kmap-and-memcpy code from read_opcode() into the new trivial helper, copy_opcode(). The next patch will add another user. 2. read_opcode() becomes really trivial, fold it into its single caller, is_swbp_at_addr(). 3. Remove "auprobe" argument from write_opcode(), it is not used since f403072c6. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a4453d1..b6f0f71 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -183,19 +183,25 @@ bool __weak is_swbp_insn(uprobe_opcode_t *insn) return *insn == UPROBE_SWBP_INSN; } +static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *opcode) +{ + void *kaddr = kmap_atomic(page); + memcpy(opcode, kaddr + (vaddr & ~PAGE_MASK), UPROBE_SWBP_INSN_SIZE); + kunmap_atomic(kaddr); +} + /* * NOTE: * Expect the breakpoint instruction to be the smallest size instruction for * the architecture. If an arch has variable length instruction and the * breakpoint instruction is not of the smallest length instruction - * supported by that architecture then we need to modify read_opcode / + * supported by that architecture then we need to modify is_swbp_at_addr and * write_opcode accordingly. This would never be a problem for archs that * have fixed length instructions. */ /* * write_opcode - write the opcode at a given virtual address. - * @auprobe: arch breakpointing information. * @mm: the probed process address space. * @vaddr: the virtual address to store the opcode. * @opcode: opcode to be written at @vaddr. @@ -206,8 +212,8 @@ bool __weak is_swbp_insn(uprobe_opcode_t *insn) * For mm @mm, write the opcode at @vaddr. * Return 0 (success) or a negative errno. */ -static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm, - unsigned long vaddr, uprobe_opcode_t opcode) +static int write_opcode(struct mm_struct *mm, unsigned long vaddr, + uprobe_opcode_t opcode) { struct page *old_page, *new_page; void *vaddr_old, *vaddr_new; @@ -253,40 +259,9 @@ put_old: return ret; } -/** - * read_opcode - read the opcode at a given virtual address. - * @mm: the probed process address space. - * @vaddr: the virtual address to read the opcode. - * @opcode: location to store the read opcode. - * - * Called with mm->mmap_sem held (for read and with a reference to - * mm. - * - * For mm @mm, read the opcode at @vaddr and store it in @opcode. - * Return 0 (success) or a negative errno. - */ -static int read_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t *opcode) -{ - struct page *page; - void *vaddr_new; - int ret; - - ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); - if (ret <= 0) - return ret; - - vaddr_new = kmap_atomic(page); - vaddr &= ~PAGE_MASK; - memcpy(opcode, vaddr_new + vaddr, UPROBE_SWBP_INSN_SIZE); - kunmap_atomic(vaddr_new); - - put_page(page); - - return 0; -} - static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) { + struct page *page; uprobe_opcode_t opcode; int result; @@ -300,14 +275,14 @@ static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) goto out; } - result = read_opcode(mm, vaddr, &opcode); - if (result) + result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); + if (result < 0) return result; -out: - if (is_swbp_insn(&opcode)) - return 1; - return 0; + copy_opcode(page, vaddr, &opcode); + put_page(page); + out: + return is_swbp_insn(&opcode); } /** @@ -321,7 +296,7 @@ out: */ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN); + return write_opcode(mm, vaddr, UPROBE_SWBP_INSN); } /** @@ -345,7 +320,7 @@ set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long v if (result != 1) return result; - return write_opcode(auprobe, mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); + return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); } static int match_uprobe(struct uprobe *l, struct uprobe *r) -- cgit v0.10.2 From ed6f6a50dc5f183c53e7b3b7fed4794bc50d9aa7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:30:44 +0200 Subject: uprobes: Kill set_orig_insn()->is_swbp_at_addr() Unlike set_swbp(), set_orig_insn()->is_swbp_at_addr() makes sense, although it can't prevent all confusions. But the usage of is_swbp_at_addr() is equally confusing, and it adds the extra get_user_pages() we can avoid. This patch removes set_orig_insn()->is_swbp_at_addr() but changes write_opcode() to do the necessary checks before replace_page(). Perhaps it also makes sense to ensure PAGE_MAPPING_ANON in unregister case. find_active_uprobe() becomes the only user of is_swbp_at_addr(), we can change its semantics. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index b6f0f71..9248ee7 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -190,6 +190,25 @@ static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t kunmap_atomic(kaddr); } +static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode) +{ + uprobe_opcode_t old_opcode; + bool is_swbp; + + copy_opcode(page, vaddr, &old_opcode); + is_swbp = is_swbp_insn(&old_opcode); + + if (is_swbp_insn(new_opcode)) { + if (is_swbp) /* register: already installed? */ + return 0; + } else { + if (!is_swbp) /* unregister: was it changed by us? */ + return -EINVAL; + } + + return 1; +} + /* * NOTE: * Expect the breakpoint instruction to be the smallest size instruction for @@ -226,6 +245,10 @@ retry: if (ret <= 0) return ret; + ret = verify_opcode(old_page, vaddr, &opcode); + if (ret <= 0) + goto put_old; + ret = -ENOMEM; new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr); if (!new_page) @@ -311,15 +334,6 @@ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned int __weak set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - int result; - - result = is_swbp_at_addr(mm, vaddr); - if (!result) - return -EINVAL; - - if (result != 1) - return result; - return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); } -- cgit v0.10.2 From ec75fba93ef0c00c91545b5e53841a80cffad0c4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:55:19 +0200 Subject: uprobes: Simplify is_swbp_at_addr(), remove stale comments After the previous change is_swbp_at_addr() is always called with current->mm. Remove this check and move it close to its single caller. Also, remove the obsolete comment about is_swbp_at_addr() and uprobe_state.count. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 9248ee7..6136854 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -282,32 +282,6 @@ put_old: return ret; } -static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) -{ - struct page *page; - uprobe_opcode_t opcode; - int result; - - if (current->mm == mm) { - pagefault_disable(); - result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr, - sizeof(opcode)); - pagefault_enable(); - - if (likely(result == 0)) - goto out; - } - - result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); - if (result < 0) - return result; - - copy_opcode(page, vaddr, &opcode); - put_page(page); - out: - return is_swbp_insn(&opcode); -} - /** * set_swbp - store breakpoint at a given address. * @auprobe: arch specific probepoint information. @@ -589,29 +563,6 @@ static int copy_insn(struct uprobe *uprobe, struct file *filp) return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset); } -/* - * How mm->uprobes_state.count gets updated - * uprobe_mmap() increments the count if - * - it successfully adds a breakpoint. - * - it cannot add a breakpoint, but sees that there is a underlying - * breakpoint (via a is_swbp_at_addr()). - * - * uprobe_munmap() decrements the count if - * - it sees a underlying breakpoint, (via is_swbp_at_addr) - * (Subsequent uprobe_unregister wouldnt find the breakpoint - * unless a uprobe_mmap kicks in, since the old vma would be - * dropped just after uprobe_munmap.) - * - * uprobe_register increments the count if: - * - it successfully adds a breakpoint. - * - * uprobe_unregister decrements the count if: - * - it sees a underlying breakpoint and removes successfully. - * (via is_swbp_at_addr) - * (Subsequent uprobe_munmap wouldnt find the breakpoint - * since there is no underlying breakpoint after the - * breakpoint removal.) - */ static int install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, struct vm_area_struct *vma, unsigned long vaddr) @@ -1389,6 +1340,30 @@ static void mmf_recalc_uprobes(struct mm_struct *mm) clear_bit(MMF_HAS_UPROBES, &mm->flags); } +static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) +{ + struct page *page; + uprobe_opcode_t opcode; + int result; + + pagefault_disable(); + result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr, + sizeof(opcode)); + pagefault_enable(); + + if (likely(result == 0)) + goto out; + + result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); + if (result < 0) + return result; + + copy_opcode(page, vaddr, &opcode); + put_page(page); + out: + return is_swbp_insn(&opcode); +} + static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp) { struct mm_struct *mm = current->mm; -- cgit v0.10.2 From 33766368f6532313571534f9112b1796d6651bbe Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 30 Sep 2012 19:47:40 +0300 Subject: mac80211: Fix FC masking in BIP AAD generation The bits used in the mask were off-by-one and ended up masking PwrMgt, MoreData, Protected fields instead of Retry, PwrMgt, MoreData. Fix this and to mask the correct fields. While doing so, convert the code to mask the full FC using IEEE80211_FCTL_* defines similarly to how CCMP AAD is built. Since BIP is used only with broadcast/multicast management frames, the Retry field is always 0 in these frames. The Protected field is also zero to maintain backwards compatibility. As such, the incorrect mask here does not really cause any problems for valid frames. In theory, an invalid BIP frame with Retry or Protected field set to 1 could be rejected because of BIP validation. However, no such frame should show up with standard compliant implementations, so this does not cause problems in normal BIP use. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e58bf3f 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -545,14 +545,19 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx) static void bip_aad(struct sk_buff *skb, u8 *aad) { + __le16 mask_fc; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + /* BIP AAD: FC(masked) || A1 || A2 || A3 */ /* FC type/subtype */ - aad[0] = skb->data[0]; /* Mask FC Retry, PwrMgt, MoreData flags to zero */ - aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6)); + mask_fc = hdr->frame_control; + mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM | + IEEE80211_FCTL_MOREDATA); + put_unaligned(mask_fc, (__le16 *) &aad[0]); /* A1 || A2 || A3 */ - memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN); + memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN); } -- cgit v0.10.2 From 60d4616f3dc63371b3dc367e5e88fd4b4f037f65 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Fri, 5 Oct 2012 11:32:02 -0400 Subject: ext4: serialize fallocate with ext4_convert_unwritten_extents Fallocate should wait for pended ext4_convert_unwritten_extents() otherwise following race may happen: ftruncate( ,12288); fallocate( ,0, 4096) io_sibmit( ,0, 4096); /* Write to fallocated area, split extent if needed */ fallocate( ,0, 8192); /* Grow extent and broke assumption about extent */ Later kwork completion will do: ->ext4_convert_unwritten_extents (0, 4096) ->ext4_map_blocks(handle, inode, &map, EXT4_GET_BLOCKS_IO_CONVERT_EXT); ->ext4_ext_map_blocks() /* Will find new extent: ex = [0,2] !!!!!! */ ->ext4_ext_handle_uninitialized_extents() ->ext4_convert_unwritten_extents_endio() /* convert [0,2] extent to initialized, but only[0,1] was written */ Signed-off-by: Dmitry Monakhov Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 1c94cca..c278927 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -4428,6 +4428,9 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len) */ if (len <= EXT_UNINIT_MAX_LEN << blkbits) flags |= EXT4_GET_BLOCKS_NO_NORMALIZE; + + /* Prevent race condition between unwritten */ + ext4_flush_unwritten_io(inode); retry: while (ret >= 0 && ret < max_blocks) { map.m_lblk = map.m_lblk + ret; -- cgit v0.10.2 From b64b9c937a533f0bfbfc9f6ac93d3c3e2f97ab02 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 29 Sep 2012 21:31:08 +0200 Subject: uprobes/x86: Only rep+nop can be emulated correctly __skip_sstep() correctly detects the "nontrivial" nop insns, but since it doesn't update regs->ip we can not really skip "0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0", the probed application is killed by SIGILL'ed handle_swbp(). Remove these additional checks. If we want to implement this correctly we need to know the full insn length to update ->ip. rep* + nop is fine even without updating ->ip. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 9538f00..aafa555 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -651,31 +651,19 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) /* * Skip these instructions as per the currently known x86 ISA. - * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 } + * rep=0x66*; nop=0x90 */ static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) { int i; for (i = 0; i < MAX_UINSN_BYTES; i++) { - if ((auprobe->insn[i] == 0x66)) + if (auprobe->insn[i] == 0x66) continue; if (auprobe->insn[i] == 0x90) return true; - if (i == (MAX_UINSN_BYTES - 1)) - break; - - if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f)) - return true; - - if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19)) - return true; - - if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0)) - return true; - break; } return false; -- cgit v0.10.2 From a5f658b71bc622b731961ea3addcf146ed3c599f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 18:21:09 +0200 Subject: uprobes: Don't return success if alloc_uprobe() fails If alloc_uprobe() fails uprobe_register() should return ENOMEM, not 0. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 6136854..588a557 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -813,7 +813,9 @@ int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer * mutex_lock(uprobes_hash(inode)); uprobe = alloc_uprobe(inode, offset); - if (uprobe && !consumer_add(uprobe, uc)) { + if (!uprobe) { + ret = -ENOMEM; + } else if (!consumer_add(uprobe, uc)) { ret = __uprobe_register(uprobe); if (ret) { uprobe->consumers = NULL; -- cgit v0.10.2 From 076a365b3da99b68c5d58e394714d0611f1fa002 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 18:54:53 +0200 Subject: uprobes: Do not delete uprobe if uprobe_unregister() fails delete_uprobe() must not be called if register_for_each_vma(false) fails to remove all breakpoints, __uprobe_unregister() is correct. The problem is that register_for_each_vma(false) always returns 0 and thus this logic does not work. 1. Change verify_opcode() to return 0 rather than -EINVAL when unregister detects the !is_swbp insn, we can treat this case as success and currently unregister paths ignore the error code anyway. 2. Change remove_breakpoint() to propagate the error code from write_opcode(). 3. Change register_for_each_vma(is_register => false) to remove as much breakpoints as possible but return non-zero if remove_breakpoint() fails at least once. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 588a557..a1b466d 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -203,7 +203,7 @@ static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t return 0; } else { if (!is_swbp) /* unregister: was it changed by us? */ - return -EINVAL; + return 0; } return 1; @@ -616,15 +616,15 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, return ret; } -static void +static int remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr) { /* can happen if uprobe_register() fails */ if (!test_bit(MMF_HAS_UPROBES, &mm->flags)) - return; + return 0; set_bit(MMF_RECALC_UPROBES, &mm->flags); - set_orig_insn(&uprobe->arch, mm, vaddr); + return set_orig_insn(&uprobe->arch, mm, vaddr); } /* @@ -740,7 +740,7 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register) struct mm_struct *mm = info->mm; struct vm_area_struct *vma; - if (err) + if (err && is_register) goto free; down_write(&mm->mmap_sem); @@ -756,7 +756,7 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register) if (is_register) err = install_breakpoint(uprobe, mm, vma, info->vaddr); else - remove_breakpoint(uprobe, mm, info->vaddr); + err |= remove_breakpoint(uprobe, mm, info->vaddr); unlock: up_write(&mm->mmap_sem); -- cgit v0.10.2 From 142b18ddc81439acda4bc4231b291e99fe67d507 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 29 Sep 2012 21:56:57 +0200 Subject: uprobes: Fix handle_swbp() vs unregister() + register() race Strictly speaking this race was added by me in 56bb4cf6. However I think that this bug is just another indication that we should move copy_insn/uprobe_analyze_insn code from install_breakpoint() to uprobe_register(), there are a lot of other reasons for that. Until then, add a hack to close the race. A task can hit uprobe U1, but before it calls find_uprobe() this uprobe can be unregistered *AND* another uprobe U2 can be added to uprobes_tree at the same inode/offset. In this case handle_swbp() will use the not-fully-initialized U2, in particular its arch.insn for xol. Add the additional !UPROBE_COPY_INSN check into handle_swbp(), if this flag is not set we simply restart as if the new uprobe was not inserted yet. This is not very nice, we need barriers, but we will remove this hack when we change uprobe_register(). Note: with or without this patch install_breakpoint() can race with itself, yet another reson to kill UPROBE_COPY_INSN altogether. And even the usage of uprobe->flags is not safe. See the next patches. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a1b466d..c718fef 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -596,6 +596,7 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, BUG_ON((uprobe->offset & ~PAGE_MASK) + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); + smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ uprobe->flags |= UPROBE_COPY_INSN; } @@ -1436,6 +1437,14 @@ static void handle_swbp(struct pt_regs *regs) } return; } + /* + * TODO: move copy_insn/etc into _register and remove this hack. + * After we hit the bp, _unregister + _register can install the + * new and not-yet-analyzed uprobe at the same address, restart. + */ + smp_rmb(); /* pairs with wmb() in install_breakpoint() */ + if (unlikely(!(uprobe->flags & UPROBE_COPY_INSN))) + goto restart; utask = current->utask; if (!utask) { -- cgit v0.10.2 From cb9a19fe4aa51afa34786bd383e6614fa0083d58 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 20:11:45 +0200 Subject: uprobes: Introduce prepare_uprobe() Preparation. Extract the copy_insn/arch_uprobe_analyze_insn code from install_breakpoint() into the new helper, prepare_uprobe(). And move uprobe->flags defines from uprobes.h to uprobes.c, nobody else can use them anyway. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index 18d839d..2459457 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -35,16 +35,6 @@ struct inode; # include #endif -/* flags that denote/change uprobes behaviour */ - -/* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 - -/* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 -/* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 - struct uprobe_consumer { int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs); /* diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index c718fef..4f315fa 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -78,6 +78,13 @@ static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ]; */ static atomic_t uprobe_events = ATOMIC_INIT(0); +/* Have a copy of original instruction */ +#define UPROBE_COPY_INSN 0x1 +/* Dont run handlers when first register/ last unregister in progress*/ +#define UPROBE_RUN_HANDLER 0x2 +/* Can skip singlestep */ +#define UPROBE_SKIP_SSTEP 0x4 + struct uprobe { struct rb_node rb_node; /* node in the rb tree */ atomic_t ref; @@ -563,6 +570,37 @@ static int copy_insn(struct uprobe *uprobe, struct file *filp) return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset); } +static int prepare_uprobe(struct uprobe *uprobe, struct file *file, + struct mm_struct *mm, unsigned long vaddr) +{ + int ret = 0; + + if (uprobe->flags & UPROBE_COPY_INSN) + return ret; + + ret = copy_insn(uprobe, file); + if (ret) + goto out; + + ret = -ENOTSUPP; + if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn)) + goto out; + + ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr); + if (ret) + goto out; + + /* write_opcode() assumes we don't cross page boundary */ + BUG_ON((uprobe->offset & ~PAGE_MASK) + + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); + + smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ + uprobe->flags |= UPROBE_COPY_INSN; + + out: + return ret; +} + static int install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, struct vm_area_struct *vma, unsigned long vaddr) @@ -580,25 +618,9 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, if (!uprobe->consumers) return 0; - if (!(uprobe->flags & UPROBE_COPY_INSN)) { - ret = copy_insn(uprobe, vma->vm_file); - if (ret) - return ret; - - if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn)) - return -ENOTSUPP; - - ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr); - if (ret) - return ret; - - /* write_opcode() assumes we don't cross page boundary */ - BUG_ON((uprobe->offset & ~PAGE_MASK) + - UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); - - smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ - uprobe->flags |= UPROBE_COPY_INSN; - } + ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr); + if (ret) + return ret; /* * set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(), -- cgit v0.10.2 From 4710f05fd146d4739e57a8832a3abc5bd3bf0997 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 20:31:41 +0200 Subject: uprobes: Fix prepare_uprobe() race with itself install_breakpoint() is called under mm->mmap_sem, this protects set_swbp() but not prepare_uprobe(). Two or more different tasks can call install_breakpoint()->prepare_uprobe() at the same time, this leads to numerous problems if UPROBE_COPY_INSN is not set. Just for example, the second copy_insn() can corrupt the already analyzed/fixuped uprobe->arch.insn and race with handle_swbp(). This patch simply adds uprobe->copy_mutex to serialize this code. We could probably reuse ->consumer_rwsem, but this would mean that consumer->handler() can not use mm->mmap_sem, not good. Note: this is another temporary ugly hack until we move this logic into uprobe_register(). Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 4f315fa..7f62b30 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -89,6 +89,7 @@ struct uprobe { struct rb_node rb_node; /* node in the rb tree */ atomic_t ref; struct rw_semaphore consumer_rwsem; + struct mutex copy_mutex; /* TODO: kill me and UPROBE_COPY_INSN */ struct list_head pending_list; struct uprobe_consumer *consumers; struct inode *inode; /* Also hold a ref to inode */ @@ -444,6 +445,7 @@ static struct uprobe *alloc_uprobe(struct inode *inode, loff_t offset) uprobe->inode = igrab(inode); uprobe->offset = offset; init_rwsem(&uprobe->consumer_rwsem); + mutex_init(&uprobe->copy_mutex); /* add to uprobes_tree, sorted on inode:offset */ cur_uprobe = insert_uprobe(uprobe); @@ -578,6 +580,10 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, if (uprobe->flags & UPROBE_COPY_INSN) return ret; + mutex_lock(&uprobe->copy_mutex); + if (uprobe->flags & UPROBE_COPY_INSN) + goto out; + ret = copy_insn(uprobe, file); if (ret) goto out; @@ -598,6 +604,8 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, uprobe->flags |= UPROBE_COPY_INSN; out: + mutex_unlock(&uprobe->copy_mutex); + return ret; } -- cgit v0.10.2 From 71434f2fcba5c22d6e0d51878ba8e241a5dea5fb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 21:12:44 +0200 Subject: uprobes: Fix the racy uprobe->flags manipulation Multiple threads can manipulate uprobe->flags, this is obviously unsafe. For example mmap can set UPROBE_COPY_INSN while register tries to set UPROBE_RUN_HANDLER, the latter can also race with can_skip_sstep() which clears UPROBE_SKIP_SSTEP. Change this code to use bitops. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 7f62b30..c92651d 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -79,11 +79,11 @@ static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ]; static atomic_t uprobe_events = ATOMIC_INIT(0); /* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 +#define UPROBE_COPY_INSN 0 /* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 +#define UPROBE_RUN_HANDLER 1 /* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 +#define UPROBE_SKIP_SSTEP 2 struct uprobe { struct rb_node rb_node; /* node in the rb tree */ @@ -94,7 +94,7 @@ struct uprobe { struct uprobe_consumer *consumers; struct inode *inode; /* Also hold a ref to inode */ loff_t offset; - int flags; + unsigned long flags; struct arch_uprobe arch; }; @@ -423,7 +423,7 @@ static struct uprobe *insert_uprobe(struct uprobe *uprobe) spin_unlock(&uprobes_treelock); /* For now assume that the instruction need not be single-stepped */ - uprobe->flags |= UPROBE_SKIP_SSTEP; + __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags); return u; } @@ -466,7 +466,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs) { struct uprobe_consumer *uc; - if (!(uprobe->flags & UPROBE_RUN_HANDLER)) + if (!test_bit(UPROBE_RUN_HANDLER, &uprobe->flags)) return; down_read(&uprobe->consumer_rwsem); @@ -577,11 +577,11 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, { int ret = 0; - if (uprobe->flags & UPROBE_COPY_INSN) + if (test_bit(UPROBE_COPY_INSN, &uprobe->flags)) return ret; mutex_lock(&uprobe->copy_mutex); - if (uprobe->flags & UPROBE_COPY_INSN) + if (test_bit(UPROBE_COPY_INSN, &uprobe->flags)) goto out; ret = copy_insn(uprobe, file); @@ -601,7 +601,7 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ - uprobe->flags |= UPROBE_COPY_INSN; + set_bit(UPROBE_COPY_INSN, &uprobe->flags); out: mutex_unlock(&uprobe->copy_mutex); @@ -852,7 +852,7 @@ int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer * uprobe->consumers = NULL; __uprobe_unregister(uprobe); } else { - uprobe->flags |= UPROBE_RUN_HANDLER; + set_bit(UPROBE_RUN_HANDLER, &uprobe->flags); } } @@ -885,7 +885,7 @@ void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consume if (consumer_del(uprobe, uc)) { if (!uprobe->consumers) { __uprobe_unregister(uprobe); - uprobe->flags &= ~UPROBE_RUN_HANDLER; + clear_bit(UPROBE_RUN_HANDLER, &uprobe->flags); } } @@ -1346,10 +1346,10 @@ bool uprobe_deny_signal(void) */ static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs) { - if (uprobe->flags & UPROBE_SKIP_SSTEP) { + if (test_bit(UPROBE_SKIP_SSTEP, &uprobe->flags)) { if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) return true; - uprobe->flags &= ~UPROBE_SKIP_SSTEP; + clear_bit(UPROBE_SKIP_SSTEP, &uprobe->flags); } return false; } @@ -1473,7 +1473,7 @@ static void handle_swbp(struct pt_regs *regs) * new and not-yet-analyzed uprobe at the same address, restart. */ smp_rmb(); /* pairs with wmb() in install_breakpoint() */ - if (unlikely(!(uprobe->flags & UPROBE_COPY_INSN))) + if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags))) goto restart; utask = current->utask; -- cgit v0.10.2 From 1d10ecf8371be22c68b2e52e7376c7075c97f656 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 27 Sep 2012 13:54:01 +0800 Subject: ARM: imx: fix return value check in imx3_init_l2x0() In case of error, the function ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843..b5deb05 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } -- cgit v0.10.2 From 964a4da327477c90aa764a1d986c58476502c0ff Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 14 Sep 2012 15:25:45 -0300 Subject: ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 On mx35pdk board there is an 8-bit microcontroller that controls several IOs, such as backlight enable pin, USB host VBUS, etc. Let it build by default. mx35pdk also needs CONFIG_LCD_PLATFORM to be selected to activate the display, so also make this the default. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3c9f32f..c80782b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -142,6 +142,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -158,6 +159,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y -- cgit v0.10.2 From e0654d0177a85490b3e61b080a09aace66805c0a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 21 Sep 2012 14:14:25 +0800 Subject: ARM: imx: fix the return value check in imx_clk_busy_divider() In case of error, the function clk_register() returns ERR_PTR() no NULL pointer. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd..1ab91b5 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; -- cgit v0.10.2 From b61a602ee6730150f4d0df730d9312ac4d820ceb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 13:04:34 +0900 Subject: ipvs: initialize returned data in do_ip_vs_get_ctl As reported by a gcc warning, the do_ip_vs_get_ctl does not initalize all the members of the ip_vs_timeout_user structure it returns if at least one of the TCP or UDP protocols is disabled for ipvs. This makes sure that the data is always initialized, before it is returned as a response to IPVS_CMD_GET_CONFIG or printed as a debug message in IPVS_CMD_SET_CONFIG. Without this patch, building ARM ixp4xx_defconfig results in: net/netfilter/ipvs/ip_vs_ctl.c: In function 'ip_vs_genl_set_cmd': net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.udp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.udp_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_fin_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_fin_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_timeout' was declared here Signed-off-by: Arnd Bergmann Acked-by: Julian Anastasov Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 7e7198b..c4ee437 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2589,6 +2589,8 @@ __ip_vs_get_timeouts(struct net *net, struct ip_vs_timeout_user *u) struct ip_vs_proto_data *pd; #endif + memset(u, 0, sizeof (*u)); + #ifdef CONFIG_IP_VS_PROTO_TCP pd = ip_vs_proto_data_get(net, IPPROTO_TCP); u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ; @@ -2766,7 +2768,6 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { struct ip_vs_timeout_user t; - memset(&t, 0, sizeof(t)); __ip_vs_get_timeouts(net, &t); if (copy_to_user(user, &t, sizeof(t)) != 0) ret = -EFAULT; -- cgit v0.10.2 From 3b4d6c8283bd676e4e8dc2c3c96d4a024ca2d7f3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 8 Oct 2012 23:20:00 -0300 Subject: ARM: imx: clk-imx27: Fix divider width field As per mx27 reference manual, H264DIV and SSI2DIV are 6-bit wide fields in register PCDR0. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index f69ca46..a85d330 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); -- cgit v0.10.2 From 10b3a979347d4aba7de19e8d33eb8b87fe2a11dd Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:47:06 +0100 Subject: UAPI: (Scripted) Disintegrate arch/m68k/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index bfe675f..e1d382f 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,5 +1,3 @@ -include include/asm-generic/Kbuild.asm -header-y += cachectl.h generic-y += bitsperlong.h generic-y += clkdev.h diff --git a/arch/m68k/include/asm/a.out.h b/arch/m68k/include/asm/a.out.h deleted file mode 100644 index 3885fe4..0000000 --- a/arch/m68k/include/asm/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __M68K_A_OUT_H__ -#define __M68K_A_OUT_H__ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __M68K_A_OUT_H__ */ diff --git a/arch/m68k/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h deleted file mode 100644 index 844d6d5..0000000 --- a/arch/m68k/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/arch/m68k/include/asm/byteorder.h b/arch/m68k/include/asm/byteorder.h deleted file mode 100644 index 31b260a..0000000 --- a/arch/m68k/include/asm/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_BYTEORDER_H -#define _M68K_BYTEORDER_H - -#include - -#endif /* _M68K_BYTEORDER_H */ diff --git a/arch/m68k/include/asm/cachectl.h b/arch/m68k/include/asm/cachectl.h deleted file mode 100644 index 525978e..0000000 --- a/arch/m68k/include/asm/cachectl.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _M68K_CACHECTL_H -#define _M68K_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ -#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ -#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ - -#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ -#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ -#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ - -#endif /* _M68K_CACHECTL_H */ diff --git a/arch/m68k/include/asm/fcntl.h b/arch/m68k/include/asm/fcntl.h deleted file mode 100644 index 1c369b2..0000000 --- a/arch/m68k/include/asm/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _M68K_FCNTL_H -#define _M68K_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif /* _M68K_FCNTL_H */ diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h deleted file mode 100644 index 1332bb4..0000000 --- a/arch/m68k/include/asm/ioctls.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ARCH_M68K_IOCTLS_H__ -#define __ARCH_M68K_IOCTLS_H__ - -#define FIOQSIZE 0x545E - -#include - -#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/arch/m68k/include/asm/msgbuf.h b/arch/m68k/include/asm/msgbuf.h deleted file mode 100644 index 243cb79..0000000 --- a/arch/m68k/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_MSGBUF_H -#define _M68K_MSGBUF_H - -/* - * The msqid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _M68K_MSGBUF_H */ diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h deleted file mode 100644 index 36265cc..0000000 --- a/arch/m68k/include/asm/param.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _M68K_PARAM_H -#define _M68K_PARAM_H - -#ifdef __uClinux__ -#define EXEC_PAGESIZE 4096 -#else -#define EXEC_PAGESIZE 8192 -#endif - -#include - -#endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/asm/poll.h b/arch/m68k/include/asm/poll.h deleted file mode 100644 index f080fcd..0000000 --- a/arch/m68k/include/asm/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __m68k_POLL_H -#define __m68k_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include - -#endif diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/asm/posix_types.h deleted file mode 100644 index cf4dbf7..0000000 --- a/arch/m68k/include/asm/posix_types.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ARCH_M68K_POSIX_TYPES_H -#define __ARCH_M68K_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -#define __kernel_uid_t __kernel_uid_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h index 65322b17..7b537cc 100644 --- a/arch/m68k/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace.h @@ -1,81 +1,12 @@ #ifndef _M68K_PTRACE_H #define _M68K_PTRACE_H -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 +#include #ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; #ifdef CONFIG_COLDFIRE - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ - unsigned short sr; - unsigned long pc; #else - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ #endif -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#define PTRACE_GET_THREAD_AREA 25 - -#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */ - -#ifdef __KERNEL__ #ifndef PS_S #define PS_S (0x2000) @@ -92,6 +23,5 @@ struct switch_stack { #define arch_has_block_step() (1) #endif -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _M68K_PTRACE_H */ diff --git a/arch/m68k/include/asm/sembuf.h b/arch/m68k/include/asm/sembuf.h deleted file mode 100644 index 2308052..0000000 --- a/arch/m68k/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_SEMBUF_H -#define _M68K_SEMBUF_H - -/* - * The semid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _M68K_SEMBUF_H */ diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h index 00c2c53..65e78a2d 100644 --- a/arch/m68k/include/asm/setup.h +++ b/arch/m68k/include/asm/setup.h @@ -19,33 +19,12 @@ ** Redesign of the boot information structure; moved boot information ** structure to bootinfo.h */ - #ifndef _M68K_SETUP_H #define _M68K_SETUP_H +#include - /* - * Linux/m68k Architectures - */ - -#define MACH_AMIGA 1 -#define MACH_ATARI 2 -#define MACH_MAC 3 -#define MACH_APOLLO 4 -#define MACH_SUN3 5 -#define MACH_MVME147 6 -#define MACH_MVME16x 7 -#define MACH_BVME6000 8 -#define MACH_HP300 9 -#define MACH_Q40 10 -#define MACH_SUN3X 11 -#define MACH_M54XX 12 - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - #define CL_SIZE COMMAND_LINE_SIZE #ifndef __ASSEMBLY__ @@ -194,63 +173,6 @@ extern unsigned long m68k_machtype; # define MACH_TYPE (m68k_machtype) #endif -#endif /* __KERNEL__ */ - - - /* - * CPU, FPU and MMU types - * - * Note: we may rely on the following equalities: - * - * CPU_68020 == MMU_68851 - * CPU_68030 == MMU_68030 - * CPU_68040 == FPU_68040 == MMU_68040 - * CPU_68060 == FPU_68060 == MMU_68060 - */ - -#define CPUB_68020 0 -#define CPUB_68030 1 -#define CPUB_68040 2 -#define CPUB_68060 3 -#define CPUB_COLDFIRE 4 - -#define CPU_68020 (1< +#include -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -20,92 +16,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ struct old_sigaction { __sighandler_t sa_handler; old_sigset_t sa_mask; @@ -123,31 +33,6 @@ struct sigaction { struct k_sigaction { struct sigaction sa; }; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include #ifndef CONFIG_CPU_HAS_NO_BITFIELDS @@ -208,5 +93,4 @@ struct pt_regs; extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); #endif /* __uClinux__ */ -#endif /* __KERNEL__ */ #endif /* _M68K_SIGNAL_H */ diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h deleted file mode 100644 index d1be684..0000000 --- a/arch/m68k/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/sockios.h b/arch/m68k/include/asm/sockios.h deleted file mode 100644 index c04a239..0000000 --- a/arch/m68k/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_M68K_SOCKIOS__ -#define __ARCH_M68K_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/arch/m68k/include/asm/stat.h b/arch/m68k/include/asm/stat.h deleted file mode 100644 index dd38bc2..0000000 --- a/arch/m68k/include/asm/stat.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68K_STAT_H -#define _M68K_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long __unused1; - unsigned long st_mtime; - unsigned long __unused2; - unsigned long st_ctime; - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad1[2]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[2]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif /* _M68K_STAT_H */ diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h deleted file mode 100644 index b7b37a4..0000000 --- a/arch/m68k/include/asm/swab.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _M68K_SWAB_H -#define _M68K_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("byterev %0" : "=d" (val) : "0" (val)); - return val; -} - -#define __arch_swab32 __arch_swab32 -#elif !defined(__mcoldfire__) - -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); - return val; -} -#define __arch_swab32 __arch_swab32 -#endif - -#endif /* _M68K_SWAB_H */ diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h deleted file mode 100644 index aea1e37..0000000 --- a/arch/m68k/include/asm/termbits.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef __ARCH_M68K_TERMBITS_H__ -#define __ARCH_M68K_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h index 0823032..ad8efb0 100644 --- a/arch/m68k/include/asm/termios.h +++ b/arch/m68k/include/asm/termios.h @@ -1,27 +1,8 @@ #ifndef _M68K_TERMIOS_H #define _M68K_TERMIOS_H -#include -#include +#include -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ /* intr=^C quit=^| erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 start=^Q stop=^S susp=^Z eol=\0 @@ -29,27 +10,6 @@ struct termio { eol2=\0 */ #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* * Translate a "termio" structure into a "termios". Ugh. @@ -87,6 +47,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _M68K_TERMIOS_H */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 045cfd6..3334300 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -1,359 +1,8 @@ #ifndef _ASM_M68K_UNISTD_H_ #define _ASM_M68K_UNISTD_H_ -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -/*#define __NR_break 17*/ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -/*#define __NR_stty 31*/ -/*#define __NR_gtty 32*/ -#define __NR_access 33 -#define __NR_nice 34 -/*#define __NR_ftime 35*/ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -/*#define __NR_prof 44*/ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -/*#define __NR_lock 53*/ -#define __NR_ioctl 54 -#define __NR_fcntl 55 -/*#define __NR_mpx 56*/ -#define __NR_setpgid 57 -/*#define __NR_ulimit 58*/ -/*#define __NR_oldolduname 59*/ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -/*#define __NR_profil 98*/ -#define __NR_statfs 99 -#define __NR_fstatfs 100 -/*#define __NR_ioperm 101*/ -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -/*#define __NR_olduname 109*/ -/*#define __NR_iopl 110*/ /* not supported */ -#define __NR_vhangup 111 -/*#define __NR_idle 112*/ /* Obsolete */ -/*#define __NR_vm86 113*/ /* not supported */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -/* 218*/ -/* 219*/ -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -/*#define __NR_vserver 278*/ -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 -#define __NR_preadv 329 -#define __NR_pwritev 330 -#define __NR_rt_tgsigqueueinfo 331 -#define __NR_perf_event_open 332 -#define __NR_get_thread_area 333 -#define __NR_set_thread_area 334 -#define __NR_atomic_cmpxchg_32 335 -#define __NR_atomic_barrier 336 -#define __NR_fanotify_init 337 -#define __NR_fanotify_mark 338 -#define __NR_prlimit64 339 -#define __NR_name_to_handle_at 340 -#define __NR_open_by_handle_at 341 -#define __NR_clock_adjtime 342 -#define __NR_syncfs 343 -#define __NR_setns 344 -#define __NR_process_vm_readv 345 -#define __NR_process_vm_writev 346 +#include -#ifdef __KERNEL__ #define NR_syscalls 347 @@ -391,5 +40,4 @@ */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif /* __KERNEL__ */ #endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild index baebb3d..972bce1 100644 --- a/arch/m68k/include/uapi/asm/Kbuild +++ b/arch/m68k/include/uapi/asm/Kbuild @@ -1,3 +1,26 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += a.out.h +header-y += auxvec.h +header-y += byteorder.h +header-y += cachectl.h +header-y += fcntl.h +header-y += ioctls.h +header-y += msgbuf.h +header-y += param.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += unistd.h diff --git a/arch/m68k/include/uapi/asm/a.out.h b/arch/m68k/include/uapi/asm/a.out.h new file mode 100644 index 0000000..3885fe4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __M68K_A_OUT_H__ +#define __M68K_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __M68K_A_OUT_H__ */ diff --git a/arch/m68k/include/uapi/asm/auxvec.h b/arch/m68k/include/uapi/asm/auxvec.h new file mode 100644 index 0000000..844d6d5 --- /dev/null +++ b/arch/m68k/include/uapi/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMm68k_AUXVEC_H +#define __ASMm68k_AUXVEC_H + +#endif diff --git a/arch/m68k/include/uapi/asm/byteorder.h b/arch/m68k/include/uapi/asm/byteorder.h new file mode 100644 index 0000000..31b260a --- /dev/null +++ b/arch/m68k/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _M68K_BYTEORDER_H +#define _M68K_BYTEORDER_H + +#include + +#endif /* _M68K_BYTEORDER_H */ diff --git a/arch/m68k/include/uapi/asm/cachectl.h b/arch/m68k/include/uapi/asm/cachectl.h new file mode 100644 index 0000000..525978e --- /dev/null +++ b/arch/m68k/include/uapi/asm/cachectl.h @@ -0,0 +1,14 @@ +#ifndef _M68K_CACHECTL_H +#define _M68K_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ +#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ +#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ + +#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ +#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ +#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ + +#endif /* _M68K_CACHECTL_H */ diff --git a/arch/m68k/include/uapi/asm/fcntl.h b/arch/m68k/include/uapi/asm/fcntl.h new file mode 100644 index 0000000..1c369b2 --- /dev/null +++ b/arch/m68k/include/uapi/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _M68K_FCNTL_H +#define _M68K_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include + +#endif /* _M68K_FCNTL_H */ diff --git a/arch/m68k/include/uapi/asm/ioctls.h b/arch/m68k/include/uapi/asm/ioctls.h new file mode 100644 index 0000000..1332bb4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/ioctls.h @@ -0,0 +1,8 @@ +#ifndef __ARCH_M68K_IOCTLS_H__ +#define __ARCH_M68K_IOCTLS_H__ + +#define FIOQSIZE 0x545E + +#include + +#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/arch/m68k/include/uapi/asm/msgbuf.h b/arch/m68k/include/uapi/asm/msgbuf.h new file mode 100644 index 0000000..243cb79 --- /dev/null +++ b/arch/m68k/include/uapi/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _M68K_MSGBUF_H +#define _M68K_MSGBUF_H + +/* + * The msqid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _M68K_MSGBUF_H */ diff --git a/arch/m68k/include/uapi/asm/param.h b/arch/m68k/include/uapi/asm/param.h new file mode 100644 index 0000000..36265cc --- /dev/null +++ b/arch/m68k/include/uapi/asm/param.h @@ -0,0 +1,12 @@ +#ifndef _M68K_PARAM_H +#define _M68K_PARAM_H + +#ifdef __uClinux__ +#define EXEC_PAGESIZE 4096 +#else +#define EXEC_PAGESIZE 8192 +#endif + +#include + +#endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/uapi/asm/poll.h b/arch/m68k/include/uapi/asm/poll.h new file mode 100644 index 0000000..f080fcd --- /dev/null +++ b/arch/m68k/include/uapi/asm/poll.h @@ -0,0 +1,9 @@ +#ifndef __m68k_POLL_H +#define __m68k_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include + +#endif diff --git a/arch/m68k/include/uapi/asm/posix_types.h b/arch/m68k/include/uapi/asm/posix_types.h new file mode 100644 index 0000000..cf4dbf7 --- /dev/null +++ b/arch/m68k/include/uapi/asm/posix_types.h @@ -0,0 +1,25 @@ +#ifndef __ARCH_M68K_POSIX_TYPES_H +#define __ARCH_M68K_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +#define __kernel_uid_t __kernel_uid_t + +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h new file mode 100644 index 0000000..caf92fd --- /dev/null +++ b/arch/m68k/include/uapi/asm/ptrace.h @@ -0,0 +1,79 @@ +#ifndef _UAPI_M68K_PTRACE_H +#define _UAPI_M68K_PTRACE_H + +#define PT_D1 0 +#define PT_D2 1 +#define PT_D3 2 +#define PT_D4 3 +#define PT_D5 4 +#define PT_D6 5 +#define PT_D7 6 +#define PT_A0 7 +#define PT_A1 8 +#define PT_A2 9 +#define PT_A3 10 +#define PT_A4 11 +#define PT_A5 12 +#define PT_A6 13 +#define PT_D0 14 +#define PT_USP 15 +#define PT_ORIG_D0 16 +#define PT_SR 17 +#define PT_PC 18 + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long d1; + long d2; + long d3; + long d4; + long d5; + long a0; + long a1; + long a2; + long d0; + long orig_d0; + long stkadj; +#ifdef CONFIG_COLDFIRE + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ + unsigned short sr; + unsigned long pc; +#else + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ +#endif +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long d6; + unsigned long d7; + unsigned long a3; + unsigned long a4; + unsigned long a5; + unsigned long a6; + unsigned long retpc; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +#define PTRACE_GET_THREAD_AREA 25 + +#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */ + +#endif /* __ASSEMBLY__ */ +#endif /* _UAPI_M68K_PTRACE_H */ diff --git a/arch/m68k/include/uapi/asm/sembuf.h b/arch/m68k/include/uapi/asm/sembuf.h new file mode 100644 index 0000000..2308052 --- /dev/null +++ b/arch/m68k/include/uapi/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _M68K_SEMBUF_H +#define _M68K_SEMBUF_H + +/* + * The semid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _M68K_SEMBUF_H */ diff --git a/arch/m68k/include/uapi/asm/setup.h b/arch/m68k/include/uapi/asm/setup.h new file mode 100644 index 0000000..85579bf --- /dev/null +++ b/arch/m68k/include/uapi/asm/setup.h @@ -0,0 +1,103 @@ +/* +** asm/setup.h -- Definition of the Linux/m68k setup information +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created 09/29/92 by Greg Harp +** +** 5/2/94 Roman Hodek: +** Added bi_atari part of the machine dependent union bi_un; for now it +** contains just a model field to distinguish between TT and Falcon. +** 26/7/96 Roman Zippel: +** Renamed to setup.h; added some useful macros to allow gcc some +** optimizations if possible. +** 5/10/96 Geert Uytterhoeven: +** Redesign of the boot information structure; moved boot information +** structure to bootinfo.h +*/ + +#ifndef _UAPI_M68K_SETUP_H +#define _UAPI_M68K_SETUP_H + + + + /* + * Linux/m68k Architectures + */ + +#define MACH_AMIGA 1 +#define MACH_ATARI 2 +#define MACH_MAC 3 +#define MACH_APOLLO 4 +#define MACH_SUN3 5 +#define MACH_MVME147 6 +#define MACH_MVME16x 7 +#define MACH_BVME6000 8 +#define MACH_HP300 9 +#define MACH_Q40 10 +#define MACH_SUN3X 11 +#define MACH_M54XX 12 + +#define COMMAND_LINE_SIZE 256 + + + + /* + * CPU, FPU and MMU types + * + * Note: we may rely on the following equalities: + * + * CPU_68020 == MMU_68851 + * CPU_68030 == MMU_68030 + * CPU_68040 == FPU_68040 == MMU_68040 + * CPU_68060 == FPU_68060 == MMU_68060 + */ + +#define CPUB_68020 0 +#define CPUB_68030 1 +#define CPUB_68040 2 +#define CPUB_68060 3 +#define CPUB_COLDFIRE 4 + +#define CPU_68020 (1< + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* _UAPI_M68K_SIGNAL_H */ diff --git a/arch/m68k/include/uapi/asm/socket.h b/arch/m68k/include/uapi/asm/socket.h new file mode 100644 index 0000000..d1be684 --- /dev/null +++ b/arch/m68k/include/uapi/asm/socket.h @@ -0,0 +1,72 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + +#define SO_RXQ_OVFL 40 + +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/uapi/asm/sockios.h b/arch/m68k/include/uapi/asm/sockios.h new file mode 100644 index 0000000..c04a239 --- /dev/null +++ b/arch/m68k/include/uapi/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_M68K_SOCKIOS__ +#define __ARCH_M68K_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/arch/m68k/include/uapi/asm/stat.h b/arch/m68k/include/uapi/asm/stat.h new file mode 100644 index 0000000..dd38bc2 --- /dev/null +++ b/arch/m68k/include/uapi/asm/stat.h @@ -0,0 +1,77 @@ +#ifndef _M68K_STAT_H +#define _M68K_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[2]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[2]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _M68K_STAT_H */ diff --git a/arch/m68k/include/uapi/asm/swab.h b/arch/m68k/include/uapi/asm/swab.h new file mode 100644 index 0000000..b7b37a4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/swab.h @@ -0,0 +1,27 @@ +#ifndef _M68K_SWAB_H +#define _M68K_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + __asm__("byterev %0" : "=d" (val) : "0" (val)); + return val; +} + +#define __arch_swab32 __arch_swab32 +#elif !defined(__mcoldfire__) + +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); + return val; +} +#define __arch_swab32 __arch_swab32 +#endif + +#endif /* _M68K_SWAB_H */ diff --git a/arch/m68k/include/uapi/asm/termbits.h b/arch/m68k/include/uapi/asm/termbits.h new file mode 100644 index 0000000..aea1e37 --- /dev/null +++ b/arch/m68k/include/uapi/asm/termbits.h @@ -0,0 +1,201 @@ +#ifndef __ARCH_M68K_TERMBITS_H__ +#define __ARCH_M68K_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/arch/m68k/include/uapi/asm/termios.h b/arch/m68k/include/uapi/asm/termios.h new file mode 100644 index 0000000..ce2142c --- /dev/null +++ b/arch/m68k/include/uapi/asm/termios.h @@ -0,0 +1,44 @@ +#ifndef _UAPI_M68K_TERMIOS_H +#define _UAPI_M68K_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_M68K_TERMIOS_H */ diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h new file mode 100644 index 0000000..fdeb341 --- /dev/null +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -0,0 +1,356 @@ +#ifndef _UAPI_ASM_M68K_UNISTD_H_ +#define _UAPI_ASM_M68K_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +/*#define __NR_break 17*/ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +/*#define __NR_stty 31*/ +/*#define __NR_gtty 32*/ +#define __NR_access 33 +#define __NR_nice 34 +/*#define __NR_ftime 35*/ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +/*#define __NR_prof 44*/ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +/*#define __NR_lock 53*/ +#define __NR_ioctl 54 +#define __NR_fcntl 55 +/*#define __NR_mpx 56*/ +#define __NR_setpgid 57 +/*#define __NR_ulimit 58*/ +/*#define __NR_oldolduname 59*/ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +/*#define __NR_profil 98*/ +#define __NR_statfs 99 +#define __NR_fstatfs 100 +/*#define __NR_ioperm 101*/ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +/*#define __NR_olduname 109*/ +/*#define __NR_iopl 110*/ /* not supported */ +#define __NR_vhangup 111 +/*#define __NR_idle 112*/ /* Obsolete */ +/*#define __NR_vm86 113*/ /* not supported */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +/* 218*/ +/* 219*/ +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +/*#define __NR_vserver 278*/ +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 +#define __NR_rt_tgsigqueueinfo 331 +#define __NR_perf_event_open 332 +#define __NR_get_thread_area 333 +#define __NR_set_thread_area 334 +#define __NR_atomic_cmpxchg_32 335 +#define __NR_atomic_barrier 336 +#define __NR_fanotify_init 337 +#define __NR_fanotify_mark 338 +#define __NR_prlimit64 339 +#define __NR_name_to_handle_at 340 +#define __NR_open_by_handle_at 341 +#define __NR_clock_adjtime 342 +#define __NR_syncfs 343 +#define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 + +#endif /* _UAPI_ASM_M68K_UNISTD_H_ */ -- cgit v0.10.2 From fc5a40a2301aa241eedb16caf9169ca5763707c1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:02 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/raid Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild index 2415a64..e69de29 100644 --- a/include/linux/raid/Kbuild +++ b/include/linux/raid/Kbuild @@ -1,2 +0,0 @@ -header-y += md_p.h -header-y += md_u.h diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h deleted file mode 100644 index ee75353..0000000 --- a/include/linux/raid/md_p.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - md_p.h : physical layout of Linux RAID devices - Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - You should have received a copy of the GNU General Public License - (for example /usr/src/linux/COPYING); if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _MD_P_H -#define _MD_P_H - -#include - -/* - * RAID superblock. - * - * The RAID superblock maintains some statistics on each RAID configuration. - * Each real device in the RAID set contains it near the end of the device. - * Some of the ideas are copied from the ext2fs implementation. - * - * We currently use 4096 bytes as follows: - * - * word offset function - * - * 0 - 31 Constant generic RAID device information. - * 32 - 63 Generic state information. - * 64 - 127 Personality specific information. - * 128 - 511 12 32-words descriptors of the disks in the raid set. - * 512 - 911 Reserved. - * 912 - 1023 Disk specific descriptor. - */ - -/* - * If x is the real device size in bytes, we return an apparent size of: - * - * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES - * - * and place the 4kB superblock at offset y. - */ -#define MD_RESERVED_BYTES (64 * 1024) -#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) - -#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) - -#define MD_SB_BYTES 4096 -#define MD_SB_WORDS (MD_SB_BYTES / 4) -#define MD_SB_SECTORS (MD_SB_BYTES / 512) - -/* - * The following are counted in 32-bit words - */ -#define MD_SB_GENERIC_OFFSET 0 -#define MD_SB_PERSONALITY_OFFSET 64 -#define MD_SB_DISKS_OFFSET 128 -#define MD_SB_DESCRIPTOR_OFFSET 992 - -#define MD_SB_GENERIC_CONSTANT_WORDS 32 -#define MD_SB_GENERIC_STATE_WORDS 32 -#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) -#define MD_SB_PERSONALITY_WORDS 64 -#define MD_SB_DESCRIPTOR_WORDS 32 -#define MD_SB_DISKS 27 -#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) - -/* - * Device "operational" state bits - */ -#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ -#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ -#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ -#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ - -#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. - * read requests will only be sent here in - * dire need - */ - -typedef struct mdp_device_descriptor_s { - __u32 number; /* 0 Device number in the entire set */ - __u32 major; /* 1 Device major number */ - __u32 minor; /* 2 Device minor number */ - __u32 raid_disk; /* 3 The role of the device in the raid set */ - __u32 state; /* 4 Operational state */ - __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; -} mdp_disk_t; - -#define MD_SB_MAGIC 0xa92b4efc - -/* - * Superblock state bits - */ -#define MD_SB_CLEAN 0 -#define MD_SB_ERRORS 1 - -#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ - -/* - * Notes: - * - if an array is being reshaped (restriped) in order to change the - * the number of active devices in the array, 'raid_disks' will be - * the larger of the old and new numbers. 'delta_disks' will - * be the "new - old". So if +ve, raid_disks is the new value, and - * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the - * old value and "raid_disks+delta_disks" is the new (smaller) value. - */ - - -typedef struct mdp_superblock_s { - /* - * Constant generic information - */ - __u32 md_magic; /* 0 MD identifier */ - __u32 major_version; /* 1 major version to which the set conforms */ - __u32 minor_version; /* 2 minor version ... */ - __u32 patch_version; /* 3 patchlevel version ... */ - __u32 gvalid_words; /* 4 Number of used words in this section */ - __u32 set_uuid0; /* 5 Raid set identifier */ - __u32 ctime; /* 6 Creation time */ - __u32 level; /* 7 Raid personality */ - __u32 size; /* 8 Apparent size of each individual disk */ - __u32 nr_disks; /* 9 total disks in the raid set */ - __u32 raid_disks; /* 10 disks in a fully functional raid set */ - __u32 md_minor; /* 11 preferred MD minor device number */ - __u32 not_persistent; /* 12 does it have a persistent superblock */ - __u32 set_uuid1; /* 13 Raid set identifier #2 */ - __u32 set_uuid2; /* 14 Raid set identifier #3 */ - __u32 set_uuid3; /* 15 Raid set identifier #4 */ - __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; - - /* - * Generic state information - */ - __u32 utime; /* 0 Superblock update time */ - __u32 state; /* 1 State bits (clean, ...) */ - __u32 active_disks; /* 2 Number of currently active disks */ - __u32 working_disks; /* 3 Number of working disks */ - __u32 failed_disks; /* 4 Number of failed disks */ - __u32 spare_disks; /* 5 Number of spare disks */ - __u32 sb_csum; /* 6 checksum of the whole superblock */ -#ifdef __BIG_ENDIAN - __u32 events_hi; /* 7 high-order of superblock update count */ - __u32 events_lo; /* 8 low-order of superblock update count */ - __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ - __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ -#else - __u32 events_lo; /* 7 low-order of superblock update count */ - __u32 events_hi; /* 8 high-order of superblock update count */ - __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ - __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ -#endif - __u32 recovery_cp; /* 11 recovery checkpoint sector count */ - /* There are only valid for minor_version > 90 */ - __u64 reshape_position; /* 12,13 next address in array-space for reshape */ - __u32 new_level; /* 14 new level we are reshaping to */ - __u32 delta_disks; /* 15 change in number of raid_disks */ - __u32 new_layout; /* 16 new layout */ - __u32 new_chunk; /* 17 new chunk size (bytes) */ - __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; - - /* - * Personality information - */ - __u32 layout; /* 0 the array's physical layout */ - __u32 chunk_size; /* 1 chunk size in bytes */ - __u32 root_pv; /* 2 LV root PV */ - __u32 root_block; /* 3 LV root block */ - __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; - - /* - * Disks information - */ - mdp_disk_t disks[MD_SB_DISKS]; - - /* - * Reserved - */ - __u32 reserved[MD_SB_RESERVED_WORDS]; - - /* - * Active descriptor - */ - mdp_disk_t this_disk; - -} mdp_super_t; - -static inline __u64 md_event(mdp_super_t *sb) { - __u64 ev = sb->events_hi; - return (ev<<32)| sb->events_lo; -} - -#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) - -/* - * The version-1 superblock : - * All numeric fields are little-endian. - * - * total size: 256 bytes plus 2 per device. - * 1K allows 384 devices. - */ -struct mdp_superblock_1 { - /* constant array information - 128 bytes */ - __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ - __le32 major_version; /* 1 */ - __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ - __le32 pad0; /* always set to 0 when writing */ - - __u8 set_uuid[16]; /* user-space generated. */ - char set_name[32]; /* set and interpreted by user-space */ - - __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ - __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ - __le32 layout; /* only for raid5 and raid10 currently */ - __le64 size; /* used size of component devices, in 512byte sectors */ - - __le32 chunksize; /* in 512byte sectors */ - __le32 raid_disks; - __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts - * NOTE: signed, so bitmap can be before superblock - * only meaningful of feature_map[0] is set. - */ - - /* These are only valid with feature bit '4' */ - __le32 new_level; /* new level we are reshaping to */ - __le64 reshape_position; /* next address in array-space for reshape */ - __le32 delta_disks; /* change in number of raid_disks */ - __le32 new_layout; /* new layout */ - __le32 new_chunk; /* new chunk size (512byte sectors) */ - __le32 new_offset; /* signed number to add to data_offset in new - * layout. 0 == no-change. This can be - * different on each device in the array. - */ - - /* constant this-device information - 64 bytes */ - __le64 data_offset; /* sector start of data, often 0 */ - __le64 data_size; /* sectors in this device that can be used for data */ - __le64 super_offset; /* sector start of this superblock */ - __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ - __le32 dev_number; /* permanent identifier of this device - not role in raid */ - __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ - __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ - __u8 devflags; /* per-device flags. Only one defined...*/ -#define WriteMostly1 1 /* mask for writemostly flag in above */ - /* Bad block log. If there are any bad blocks the feature flag is set. - * If offset and size are non-zero, that space is reserved and available - */ - __u8 bblog_shift; /* shift from sectors to block size */ - __le16 bblog_size; /* number of sectors reserved for list */ - __le32 bblog_offset; /* sector offset from superblock to bblog, - * signed - not unsigned */ - - /* array state information - 64 bytes */ - __le64 utime; /* 40 bits second, 24 bits microseconds */ - __le64 events; /* incremented when superblock updated */ - __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ - __le32 sb_csum; /* checksum up to devs[max_dev] */ - __le32 max_dev; /* size of devs[] array to consider */ - __u8 pad3[64-32]; /* set to 0 when writing */ - - /* device state information. Indexed by dev_number. - * 2 bytes per device - * Note there are no per-device state flags. State information is rolled - * into the 'roles' value. If a device is spare or faulty, then it doesn't - * have a meaningful role. - */ - __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ -}; - -/* feature_map bits */ -#define MD_FEATURE_BITMAP_OFFSET 1 -#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and - * must be honoured - */ -#define MD_FEATURE_RESHAPE_ACTIVE 4 -#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ -#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an - * active device with same 'role'. - * 'recovery_offset' is also set. - */ -#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number - * of devices, but is going - * backwards anyway. - */ -#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ -#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ - |MD_FEATURE_RECOVERY_OFFSET \ - |MD_FEATURE_RESHAPE_ACTIVE \ - |MD_FEATURE_BAD_BLOCKS \ - |MD_FEATURE_REPLACEMENT \ - |MD_FEATURE_RESHAPE_BACKWARDS \ - |MD_FEATURE_NEW_OFFSET \ - ) - -#endif diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h index fb1abb3..358c04b 100644 --- a/include/linux/raid/md_u.h +++ b/include/linux/raid/md_u.h @@ -11,149 +11,10 @@ (for example /usr/src/linux/COPYING); if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef _MD_U_H #define _MD_U_H -/* - * Different major versions are not compatible. - * Different minor versions are only downward compatible. - * Different patchlevel versions are downward and upward compatible. - */ -#define MD_MAJOR_VERSION 0 -#define MD_MINOR_VERSION 90 -/* - * MD_PATCHLEVEL_VERSION indicates kernel functionality. - * >=1 means different superblock formats are selectable using SET_ARRAY_INFO - * and major_version/minor_version accordingly - * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT - * in the super status byte - * >=3 means that bitmap superblock version 4 is supported, which uses - * little-ending representation rather than host-endian - */ -#define MD_PATCHLEVEL_VERSION 3 - -/* ioctls */ - -/* status */ -#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) -#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) -#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) -#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) -#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) -#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) - -/* configuration */ -#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) -#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) -#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) -#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) -#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) -#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) -#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) -#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) -#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) -#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) -#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) -#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) +#include -/* usage */ -#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) -/* 0x31 was START_ARRAY */ -#define STOP_ARRAY _IO (MD_MAJOR, 0x32) -#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) -#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) - -/* 63 partitions with the alternate major number (mdp) */ -#define MdpMinorShift 6 -#ifdef __KERNEL__ extern int mdp_major; -#endif - -typedef struct mdu_version_s { - int major; - int minor; - int patchlevel; -} mdu_version_t; - -typedef struct mdu_array_info_s { - /* - * Generic constant information - */ - int major_version; - int minor_version; - int patch_version; - int ctime; - int level; - int size; - int nr_disks; - int raid_disks; - int md_minor; - int not_persistent; - - /* - * Generic state information - */ - int utime; /* 0 Superblock update time */ - int state; /* 1 State bits (clean, ...) */ - int active_disks; /* 2 Number of currently active disks */ - int working_disks; /* 3 Number of working disks */ - int failed_disks; /* 4 Number of failed disks */ - int spare_disks; /* 5 Number of spare disks */ - - /* - * Personality information - */ - int layout; /* 0 the array's physical layout */ - int chunk_size; /* 1 chunk size in bytes */ - -} mdu_array_info_t; - -/* non-obvious values for 'level' */ -#define LEVEL_MULTIPATH (-4) -#define LEVEL_LINEAR (-1) -#define LEVEL_FAULTY (-5) - -/* we need a value for 'no level specified' and 0 - * means 'raid0', so we need something else. This is - * for internal use only - */ -#define LEVEL_NONE (-1000000) - -typedef struct mdu_disk_info_s { - /* - * configuration/status of one particular disk - */ - int number; - int major; - int minor; - int raid_disk; - int state; - -} mdu_disk_info_t; - -typedef struct mdu_start_info_s { - /* - * configuration/status of one particular disk - */ - int major; - int minor; - int raid_disk; - int state; - -} mdu_start_info_t; - -typedef struct mdu_bitmap_file_s -{ - char pathname[4096]; -} mdu_bitmap_file_t; - -typedef struct mdu_param_s -{ - int personality; /* 1,2,3,4 */ - int chunk_size; /* in bytes */ - int max_fault; /* unused for now */ -} mdu_param_t; - #endif - diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild index aafaa5a..e2c3d25 100644 --- a/include/uapi/linux/raid/Kbuild +++ b/include/uapi/linux/raid/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += md_p.h +header-y += md_u.h diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h new file mode 100644 index 0000000..ee75353 --- /dev/null +++ b/include/uapi/linux/raid/md_p.h @@ -0,0 +1,301 @@ +/* + md_p.h : physical layout of Linux RAID devices + Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _MD_P_H +#define _MD_P_H + +#include + +/* + * RAID superblock. + * + * The RAID superblock maintains some statistics on each RAID configuration. + * Each real device in the RAID set contains it near the end of the device. + * Some of the ideas are copied from the ext2fs implementation. + * + * We currently use 4096 bytes as follows: + * + * word offset function + * + * 0 - 31 Constant generic RAID device information. + * 32 - 63 Generic state information. + * 64 - 127 Personality specific information. + * 128 - 511 12 32-words descriptors of the disks in the raid set. + * 512 - 911 Reserved. + * 912 - 1023 Disk specific descriptor. + */ + +/* + * If x is the real device size in bytes, we return an apparent size of: + * + * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES + * + * and place the 4kB superblock at offset y. + */ +#define MD_RESERVED_BYTES (64 * 1024) +#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) + +#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) + +#define MD_SB_BYTES 4096 +#define MD_SB_WORDS (MD_SB_BYTES / 4) +#define MD_SB_SECTORS (MD_SB_BYTES / 512) + +/* + * The following are counted in 32-bit words + */ +#define MD_SB_GENERIC_OFFSET 0 +#define MD_SB_PERSONALITY_OFFSET 64 +#define MD_SB_DISKS_OFFSET 128 +#define MD_SB_DESCRIPTOR_OFFSET 992 + +#define MD_SB_GENERIC_CONSTANT_WORDS 32 +#define MD_SB_GENERIC_STATE_WORDS 32 +#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) +#define MD_SB_PERSONALITY_WORDS 64 +#define MD_SB_DESCRIPTOR_WORDS 32 +#define MD_SB_DISKS 27 +#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) + +/* + * Device "operational" state bits + */ +#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ +#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ +#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ +#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ + +#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. + * read requests will only be sent here in + * dire need + */ + +typedef struct mdp_device_descriptor_s { + __u32 number; /* 0 Device number in the entire set */ + __u32 major; /* 1 Device major number */ + __u32 minor; /* 2 Device minor number */ + __u32 raid_disk; /* 3 The role of the device in the raid set */ + __u32 state; /* 4 Operational state */ + __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; +} mdp_disk_t; + +#define MD_SB_MAGIC 0xa92b4efc + +/* + * Superblock state bits + */ +#define MD_SB_CLEAN 0 +#define MD_SB_ERRORS 1 + +#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ + +/* + * Notes: + * - if an array is being reshaped (restriped) in order to change the + * the number of active devices in the array, 'raid_disks' will be + * the larger of the old and new numbers. 'delta_disks' will + * be the "new - old". So if +ve, raid_disks is the new value, and + * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the + * old value and "raid_disks+delta_disks" is the new (smaller) value. + */ + + +typedef struct mdp_superblock_s { + /* + * Constant generic information + */ + __u32 md_magic; /* 0 MD identifier */ + __u32 major_version; /* 1 major version to which the set conforms */ + __u32 minor_version; /* 2 minor version ... */ + __u32 patch_version; /* 3 patchlevel version ... */ + __u32 gvalid_words; /* 4 Number of used words in this section */ + __u32 set_uuid0; /* 5 Raid set identifier */ + __u32 ctime; /* 6 Creation time */ + __u32 level; /* 7 Raid personality */ + __u32 size; /* 8 Apparent size of each individual disk */ + __u32 nr_disks; /* 9 total disks in the raid set */ + __u32 raid_disks; /* 10 disks in a fully functional raid set */ + __u32 md_minor; /* 11 preferred MD minor device number */ + __u32 not_persistent; /* 12 does it have a persistent superblock */ + __u32 set_uuid1; /* 13 Raid set identifier #2 */ + __u32 set_uuid2; /* 14 Raid set identifier #3 */ + __u32 set_uuid3; /* 15 Raid set identifier #4 */ + __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; + + /* + * Generic state information + */ + __u32 utime; /* 0 Superblock update time */ + __u32 state; /* 1 State bits (clean, ...) */ + __u32 active_disks; /* 2 Number of currently active disks */ + __u32 working_disks; /* 3 Number of working disks */ + __u32 failed_disks; /* 4 Number of failed disks */ + __u32 spare_disks; /* 5 Number of spare disks */ + __u32 sb_csum; /* 6 checksum of the whole superblock */ +#ifdef __BIG_ENDIAN + __u32 events_hi; /* 7 high-order of superblock update count */ + __u32 events_lo; /* 8 low-order of superblock update count */ + __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ + __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ +#else + __u32 events_lo; /* 7 low-order of superblock update count */ + __u32 events_hi; /* 8 high-order of superblock update count */ + __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ + __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ +#endif + __u32 recovery_cp; /* 11 recovery checkpoint sector count */ + /* There are only valid for minor_version > 90 */ + __u64 reshape_position; /* 12,13 next address in array-space for reshape */ + __u32 new_level; /* 14 new level we are reshaping to */ + __u32 delta_disks; /* 15 change in number of raid_disks */ + __u32 new_layout; /* 16 new layout */ + __u32 new_chunk; /* 17 new chunk size (bytes) */ + __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; + + /* + * Personality information + */ + __u32 layout; /* 0 the array's physical layout */ + __u32 chunk_size; /* 1 chunk size in bytes */ + __u32 root_pv; /* 2 LV root PV */ + __u32 root_block; /* 3 LV root block */ + __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; + + /* + * Disks information + */ + mdp_disk_t disks[MD_SB_DISKS]; + + /* + * Reserved + */ + __u32 reserved[MD_SB_RESERVED_WORDS]; + + /* + * Active descriptor + */ + mdp_disk_t this_disk; + +} mdp_super_t; + +static inline __u64 md_event(mdp_super_t *sb) { + __u64 ev = sb->events_hi; + return (ev<<32)| sb->events_lo; +} + +#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) + +/* + * The version-1 superblock : + * All numeric fields are little-endian. + * + * total size: 256 bytes plus 2 per device. + * 1K allows 384 devices. + */ +struct mdp_superblock_1 { + /* constant array information - 128 bytes */ + __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ + __le32 major_version; /* 1 */ + __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ + __le32 pad0; /* always set to 0 when writing */ + + __u8 set_uuid[16]; /* user-space generated. */ + char set_name[32]; /* set and interpreted by user-space */ + + __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ + __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ + __le32 layout; /* only for raid5 and raid10 currently */ + __le64 size; /* used size of component devices, in 512byte sectors */ + + __le32 chunksize; /* in 512byte sectors */ + __le32 raid_disks; + __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts + * NOTE: signed, so bitmap can be before superblock + * only meaningful of feature_map[0] is set. + */ + + /* These are only valid with feature bit '4' */ + __le32 new_level; /* new level we are reshaping to */ + __le64 reshape_position; /* next address in array-space for reshape */ + __le32 delta_disks; /* change in number of raid_disks */ + __le32 new_layout; /* new layout */ + __le32 new_chunk; /* new chunk size (512byte sectors) */ + __le32 new_offset; /* signed number to add to data_offset in new + * layout. 0 == no-change. This can be + * different on each device in the array. + */ + + /* constant this-device information - 64 bytes */ + __le64 data_offset; /* sector start of data, often 0 */ + __le64 data_size; /* sectors in this device that can be used for data */ + __le64 super_offset; /* sector start of this superblock */ + __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ + __le32 dev_number; /* permanent identifier of this device - not role in raid */ + __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ + __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ + __u8 devflags; /* per-device flags. Only one defined...*/ +#define WriteMostly1 1 /* mask for writemostly flag in above */ + /* Bad block log. If there are any bad blocks the feature flag is set. + * If offset and size are non-zero, that space is reserved and available + */ + __u8 bblog_shift; /* shift from sectors to block size */ + __le16 bblog_size; /* number of sectors reserved for list */ + __le32 bblog_offset; /* sector offset from superblock to bblog, + * signed - not unsigned */ + + /* array state information - 64 bytes */ + __le64 utime; /* 40 bits second, 24 bits microseconds */ + __le64 events; /* incremented when superblock updated */ + __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ + __le32 sb_csum; /* checksum up to devs[max_dev] */ + __le32 max_dev; /* size of devs[] array to consider */ + __u8 pad3[64-32]; /* set to 0 when writing */ + + /* device state information. Indexed by dev_number. + * 2 bytes per device + * Note there are no per-device state flags. State information is rolled + * into the 'roles' value. If a device is spare or faulty, then it doesn't + * have a meaningful role. + */ + __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ +}; + +/* feature_map bits */ +#define MD_FEATURE_BITMAP_OFFSET 1 +#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and + * must be honoured + */ +#define MD_FEATURE_RESHAPE_ACTIVE 4 +#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ +#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an + * active device with same 'role'. + * 'recovery_offset' is also set. + */ +#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number + * of devices, but is going + * backwards anyway. + */ +#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ +#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ + |MD_FEATURE_RECOVERY_OFFSET \ + |MD_FEATURE_RESHAPE_ACTIVE \ + |MD_FEATURE_BAD_BLOCKS \ + |MD_FEATURE_REPLACEMENT \ + |MD_FEATURE_RESHAPE_BACKWARDS \ + |MD_FEATURE_NEW_OFFSET \ + ) + +#endif diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h new file mode 100644 index 0000000..4133e74 --- /dev/null +++ b/include/uapi/linux/raid/md_u.h @@ -0,0 +1,155 @@ +/* + md_u.h : user <=> kernel API between Linux raidtools and RAID drivers + Copyright (C) 1998 Ingo Molnar + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _UAPI_MD_U_H +#define _UAPI_MD_U_H + +/* + * Different major versions are not compatible. + * Different minor versions are only downward compatible. + * Different patchlevel versions are downward and upward compatible. + */ +#define MD_MAJOR_VERSION 0 +#define MD_MINOR_VERSION 90 +/* + * MD_PATCHLEVEL_VERSION indicates kernel functionality. + * >=1 means different superblock formats are selectable using SET_ARRAY_INFO + * and major_version/minor_version accordingly + * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT + * in the super status byte + * >=3 means that bitmap superblock version 4 is supported, which uses + * little-ending representation rather than host-endian + */ +#define MD_PATCHLEVEL_VERSION 3 + +/* ioctls */ + +/* status */ +#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) +#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) +#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) +#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) +#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) +#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) + +/* configuration */ +#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) +#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) +#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) +#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) +#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) +#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) +#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) +#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) +#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) +#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) +#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) +#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) + +/* usage */ +#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) +/* 0x31 was START_ARRAY */ +#define STOP_ARRAY _IO (MD_MAJOR, 0x32) +#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) +#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) + +/* 63 partitions with the alternate major number (mdp) */ +#define MdpMinorShift 6 + +typedef struct mdu_version_s { + int major; + int minor; + int patchlevel; +} mdu_version_t; + +typedef struct mdu_array_info_s { + /* + * Generic constant information + */ + int major_version; + int minor_version; + int patch_version; + int ctime; + int level; + int size; + int nr_disks; + int raid_disks; + int md_minor; + int not_persistent; + + /* + * Generic state information + */ + int utime; /* 0 Superblock update time */ + int state; /* 1 State bits (clean, ...) */ + int active_disks; /* 2 Number of currently active disks */ + int working_disks; /* 3 Number of working disks */ + int failed_disks; /* 4 Number of failed disks */ + int spare_disks; /* 5 Number of spare disks */ + + /* + * Personality information + */ + int layout; /* 0 the array's physical layout */ + int chunk_size; /* 1 chunk size in bytes */ + +} mdu_array_info_t; + +/* non-obvious values for 'level' */ +#define LEVEL_MULTIPATH (-4) +#define LEVEL_LINEAR (-1) +#define LEVEL_FAULTY (-5) + +/* we need a value for 'no level specified' and 0 + * means 'raid0', so we need something else. This is + * for internal use only + */ +#define LEVEL_NONE (-1000000) + +typedef struct mdu_disk_info_s { + /* + * configuration/status of one particular disk + */ + int number; + int major; + int minor; + int raid_disk; + int state; + +} mdu_disk_info_t; + +typedef struct mdu_start_info_s { + /* + * configuration/status of one particular disk + */ + int major; + int minor; + int raid_disk; + int state; + +} mdu_start_info_t; + +typedef struct mdu_bitmap_file_s +{ + char pathname[4096]; +} mdu_bitmap_file_t; + +typedef struct mdu_param_s +{ + int personality; /* 1,2,3,4 */ + int chunk_size; /* in bytes */ + int max_fault; /* unused for now */ +} mdu_param_t; + +#endif /* _UAPI_MD_U_H */ -- cgit v0.10.2 From 5c5b06c3c09510a2e90f6453266823dc6f940c70 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:49:31 +0000 Subject: ARM: kprobes: make more tests conditional The mls instruction is not available in ARMv6K or below, so we should make the test conditional on at least ARMv7. ldrexd/strexd are available in ARMv6K or ARMv7, which we can test by checking the CONFIG_CPU_32v6K symbol. /tmp/ccuMTZ8D.s: Assembler messages: /tmp/ccuMTZ8D.s:22188: Error: selected processor does not support ARM mode `mls r0,r1,r2,r3' /tmp/ccuMTZ8D.s:22222: Error: selected processor does not support ARM mode `mlshi r7,r8,r9,r10' /tmp/ccuMTZ8D.s:22252: Error: selected processor does not support ARM mode `mls lr,r1,r2,r13' Signed-off-by: Arnd Bergmann Acked-by: Jon Medhurst Acked-by: Nicolas Pitre Cc: Russell King Cc: Leif Lindholm diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b..8393129 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") -- cgit v0.10.2 From 05c769823cd0648fc56c8f0289c5f14d465389a8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:49:26 +0000 Subject: ARM: export set_irq_flags The recently added Emma Mobile GPIO driver calls set_irq_flags and irq_set_chip_and_handler for the interrupts it exports and it can be built as a module, which currently fails with ERROR: "set_irq_flags" [drivers/gpio/gpio-em.ko] undefined! We either need to replace the call to set_irq_flags with something else or export that function. This patch does the latter. Signed-off-by: Arnd Bergmann Acked-by: Thomas Gleixner Cc: Magnus Damm Cc: Linus Walleij Cc: Rafael J. Wysocki Cc: Russell King diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb4..8961650 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { -- cgit v0.10.2 From 31d2a638a91340d00502d397e558271f516b4f17 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 7 Oct 2012 20:35:18 +0000 Subject: ARM: Fix another build warning in arch/arm/mm/alignment.c One such warning was recently fixed in a761cebf "ARM: Fix build warning in arch/arm/mm/alignment.c" but only for the thumb2 case, this fixes the other half. arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:327:15: error: 'offset.un' may be used uninitialized in this function arch/arm/mm/alignment.c:748:21: note: 'offset.un' was declared here Signed-off-by: Arnd Bergmann Cc: Russell King diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60eb..023f4437 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: -- cgit v0.10.2 From f3accb122f2c758494a6db3b9e9a8cd62aafcf83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 1 Oct 2012 14:47:31 +0000 Subject: ARM: export default read_current_timer read_current_timer is used by get_cycles since "ARM: 7538/1: delay: add registration mechanism for delay timer sources", and get_cycles can be used by device drivers in loadable modules, so it has to be exported. Without this patch, building imote2_defconfig fails with ERROR: "read_current_timer" [crypto/tcrypt.ko] undefined! Signed-off-by: Arnd Bergmann Cc: Stephen Boyd Cc: Jonathan Austin Cc: Will Deacon Cc: Russell King diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a300..0dc5385 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { -- cgit v0.10.2 From f880b67dcbdedb49453f88d2ccb1a0937b046d82 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 10:33:52 +0000 Subject: ARM: Xen: fix initial build problems * The XEN_BALLOON code requires the balloon infrastructure that is not getting built on ARM. * The tmem hypercall is not available on ARM * ARMv6 does not support cmpxchg on 16-bit words that are used in the Xen grant table code, so we must ensure that Xen support is only built on ARMv7-only kernels not combined ARMv6/v7 kernels. * sys-hypervisor.c needs to include linux/err.h in order to use the IS_ERR/PTR_ERR/ERR_PTR family of functions. Signed-off-by: Arnd Bergmann Acked-by: Ian Campbell Cc: Stefano Stabellini Cc: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge Cc: xen-devel@lists.xensource.com diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d2f7f5..e1d6ab2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1846,6 +1846,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index d4dffcd..126d8ce 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -3,6 +3,7 @@ menu "Xen driver support" config XEN_BALLOON bool "Xen memory balloon driver" + depends on !ARM default y help The balloon driver allows the Xen domain to request more memory from @@ -145,6 +146,7 @@ config SWIOTLB_XEN config XEN_TMEM bool + depends on !ARM default y if (CLEANCACHE || FRONTSWAP) help Shim to interface in-kernel Transcendent Memory hooks diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index 5e5ad7e2..66a0a14 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 91802a8ef410810db58907d2ea4c4adc00ef4688 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 10 Aug 2012 11:12:20 +0000 Subject: ARM: pass -marm to gcc by default for both C and assembler The Linaro cross toolchain and probably others nowadays default to building in THUMB2 mode. When building a kernel for a CPU that does not support THUMB2, the compiler complains about incorrect flags. We can work around this by setting -marm for all non-T2 builds. -marm was passed unconditionally for C files previously, but nothing was passed to the gcc frontend when processing .S files, resulting in a warning. The assembler never defaults to ARM unless -Wa,-mthumb is supplied explicitly, so the files were still assembled correctly. This patch makes sure that -marm is passed for .S files too, and also avoids the redundant gcc -marm -mthumb in Thumb kernels. Without this patch, building assabet_defconfig results in: usr/initramfs_data.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] arch/arm/nwfpe/entry.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] firmware/cis/PCMLM28.cis.gen.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] (and many more) Signed-off-by: Arnd Bergmann Acked-by: Nicolas Pitre Acked-by: Dave Martin Cc: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3a..5f914fc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ -- cgit v0.10.2 From edc88ceb0c7d285b9f58bc29a638cd8163b59989 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 12:16:16 +0000 Subject: ARM: be really quiet when building with 'make -s' Sometimes we want the kernel build process to only print messages on errors, e.g. in automated build testing. This uses the "kecho" macro that the build system provides to hide a few informational messages. Nothing changes for a regular "make" or "make V=1". Without this patch, building any ARM kernel results in: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Signed-off-by: Arnd Bergmann Acked-by: Nicolas Pitre Cc: Russell King Cc: Catalin Marinas Cc: Michal Marek diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab01..f2aa09e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + $(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb18..cd60a81 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + $(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } -- cgit v0.10.2 From f6d5d8a5ed60c726354605877e8f8214fb11cc02 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 13:18:37 +0000 Subject: ARM: binfmt_flat: unused variable 'persistent' The flat_get_addr_from_rp() macro does not use the 'persistent' argument on ARM, causing a harmless compiler warning. A cast to void removes that warning. Without this patch, building at91x40_defconfig results in: fs/binfmt_flat.c: In function 'load_flat_file': fs/binfmt_flat.c:746:17: warning: unused variable 'persistent' [-Wunused-variable] Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Cc: Russell King Cc: Bryan Wu diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4..e847d23 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 -- cgit v0.10.2 From 8e7fc18b5eacc37b6e6fcf486ec4eafbfef91738 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 13:18:46 +0000 Subject: ARM: warnings in arch/arm/include/asm/uaccess.h On NOMMU ARM, the __addr_ok() and __range_ok() macros do not evaluate their arguments, which may lead to harmless build warnings in some code where the variables are not used otherwise. Adding a cast to void gets rid of the warning and does not make any semantic changes. Without this patch, building at91x40_defconfig results in: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:684:9: warning: unused variable 'buf' [-Wunused-variable] Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Cc: Russell King diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f..7e1f760 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) -- cgit v0.10.2 From 588377d6199034c36d335e7df5818b731fea072c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 8 Oct 2012 20:37:30 -0700 Subject: rbd: reset BACKOFF if unable to re-queue If ceph_fault() is unable to queue work after a delay, it sets the BACKOFF connection flag so con_work() will attempt to do so. In con_work(), when BACKOFF is set, if queue_delayed_work() doesn't result in newly-queued work, it simply ignores this condition and proceeds as if no backoff delay were desired. There are two problems with this--one of which is a bug. The first problem is simply that the intended behavior is to back off, and if we aren't able queue the work item to run after a delay we're not doing that. The only reason queue_delayed_work() won't queue work is if the provided work item is already queued. In the messenger, this means that con_work() is already scheduled to be run again. So if we simply set the BACKOFF flag again when this occurs, we know the next con_work() call will again attempt to hold off activity on the connection until after the delay. The second problem--the bug--is a leak of a reference count. If queue_delayed_work() returns 0 in con_work(), con->ops->put() drops the connection reference held on entry to con_work(). However, processing is (was) allowed to continue, and at the end of the function a second con->ops->put() is called. This patch fixes both problems. Signed-off-by: Alex Elder Reviewed-by: Sage Weil diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 159aa8b..cad0d17 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -2300,10 +2300,11 @@ restart: mutex_unlock(&con->mutex); return; } else { - con->ops->put(con); dout("con_work %p FAILED to back off %lu\n", con, con->delay); + set_bit(CON_FLAG_BACKOFF, &con->flags); } + goto done; } if (con->state == CON_STATE_STANDBY) { -- cgit v0.10.2 From dee1f973ca341c266229faa5a1a5bb268bed3531 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 10 Oct 2012 01:04:58 -0400 Subject: ext4: race-condition protection for ext4_convert_unwritten_extents_endio We assumed that at the time we call ext4_convert_unwritten_extents_endio() extent in question is fully inside [map.m_lblk, map->m_len] because it was already split during submission. But this may not be true due to a race between writeback vs fallocate. If extent in question is larger than requested we will split it again. Special precautions should being done if zeroout required because [map.m_lblk, map->m_len] already contains valid data. Signed-off-by: Dmitry Monakhov Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index c278927..7011ac9 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -52,6 +52,9 @@ #define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */ #define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */ +#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */ +#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */ + static __le32 ext4_extent_block_csum(struct inode *inode, struct ext4_extent_header *eh) { @@ -2914,6 +2917,9 @@ static int ext4_split_extent_at(handle_t *handle, unsigned int ee_len, depth; int err = 0; + BUG_ON((split_flag & (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)) == + (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)); + ext_debug("ext4_split_extents_at: inode %lu, logical" "block %llu\n", inode->i_ino, (unsigned long long)split); @@ -2972,7 +2978,14 @@ static int ext4_split_extent_at(handle_t *handle, err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) { - err = ext4_ext_zeroout(inode, &orig_ex); + if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) { + if (split_flag & EXT4_EXT_DATA_VALID1) + err = ext4_ext_zeroout(inode, ex2); + else + err = ext4_ext_zeroout(inode, ex); + } else + err = ext4_ext_zeroout(inode, &orig_ex); + if (err) goto fix_extent_len; /* update the extent length and mark as initialized */ @@ -3025,12 +3038,13 @@ static int ext4_split_extent(handle_t *handle, uninitialized = ext4_ext_is_uninitialized(ex); if (map->m_lblk + map->m_len < ee_block + ee_len) { - split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ? - EXT4_EXT_MAY_ZEROOUT : 0; + split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT; flags1 = flags | EXT4_GET_BLOCKS_PRE_IO; if (uninitialized) split_flag1 |= EXT4_EXT_MARK_UNINIT1 | EXT4_EXT_MARK_UNINIT2; + if (split_flag & EXT4_EXT_DATA_VALID2) + split_flag1 |= EXT4_EXT_DATA_VALID1; err = ext4_split_extent_at(handle, inode, path, map->m_lblk + map->m_len, split_flag1, flags1); if (err) @@ -3043,8 +3057,8 @@ static int ext4_split_extent(handle_t *handle, return PTR_ERR(path); if (map->m_lblk >= ee_block) { - split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ? - EXT4_EXT_MAY_ZEROOUT : 0; + split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT | + EXT4_EXT_DATA_VALID2); if (uninitialized) split_flag1 |= EXT4_EXT_MARK_UNINIT1; if (split_flag & EXT4_EXT_MARK_UNINIT2) @@ -3323,26 +3337,47 @@ static int ext4_split_unwritten_extents(handle_t *handle, split_flag |= ee_block + ee_len <= eof_block ? EXT4_EXT_MAY_ZEROOUT : 0; split_flag |= EXT4_EXT_MARK_UNINIT2; - + if (flags & EXT4_GET_BLOCKS_CONVERT) + split_flag |= EXT4_EXT_DATA_VALID2; flags |= EXT4_GET_BLOCKS_PRE_IO; return ext4_split_extent(handle, inode, path, map, split_flag, flags); } static int ext4_convert_unwritten_extents_endio(handle_t *handle, - struct inode *inode, - struct ext4_ext_path *path) + struct inode *inode, + struct ext4_map_blocks *map, + struct ext4_ext_path *path) { struct ext4_extent *ex; + ext4_lblk_t ee_block; + unsigned int ee_len; int depth; int err = 0; depth = ext_depth(inode); ex = path[depth].p_ext; + ee_block = le32_to_cpu(ex->ee_block); + ee_len = ext4_ext_get_actual_len(ex); ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical" "block %llu, max_blocks %u\n", inode->i_ino, - (unsigned long long)le32_to_cpu(ex->ee_block), - ext4_ext_get_actual_len(ex)); + (unsigned long long)ee_block, ee_len); + + /* If extent is larger than requested then split is required */ + if (ee_block != map->m_lblk || ee_len > map->m_len) { + err = ext4_split_unwritten_extents(handle, inode, map, path, + EXT4_GET_BLOCKS_CONVERT); + if (err < 0) + goto out; + ext4_ext_drop_refs(path); + path = ext4_ext_find_extent(inode, map->m_lblk, path); + if (IS_ERR(path)) { + err = PTR_ERR(path); + goto out; + } + depth = ext_depth(inode); + ex = path[depth].p_ext; + } err = ext4_ext_get_access(handle, inode, path + depth); if (err) @@ -3652,7 +3687,7 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, } /* IO end_io complete, convert the filled extent to written */ if ((flags & EXT4_GET_BLOCKS_CONVERT)) { - ret = ext4_convert_unwritten_extents_endio(handle, inode, + ret = ext4_convert_unwritten_extents_endio(handle, inode, map, path); if (ret >= 0) { ext4_update_inode_fsync_trans(handle, inode, 1); -- cgit v0.10.2 From 06db49e68ae70cf16819b85a14057acb2820776a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 10 Oct 2012 01:06:58 -0400 Subject: ext4: fix metadata checksum calculation for the superblock The function ext4_handle_dirty_super() was calculating the superblock on the wrong block data. As a result, when the superblock is modified while it is mounted (most commonly, when inodes are added or removed from the orphan list), the superblock checksum would be wrong. We didn't notice because the superblock *was* being correctly calculated in ext4_commit_super(), and this would get called when the file system was unmounted. So the problem only became obvious if the system crashed while the file system was mounted. Fix this by removing the poorly designed function signature for ext4_superblock_csum_set(); if it only took a single argument, the pointer to a struct superblock, the ambiguity which caused this mistake would have been impossible. Reported-by: George Spelvin Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 3ab2539..78971cf 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2063,8 +2063,7 @@ extern int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count); extern int ext4_calculate_overhead(struct super_block *sb); extern int ext4_superblock_csum_verify(struct super_block *sb, struct ext4_super_block *es); -extern void ext4_superblock_csum_set(struct super_block *sb, - struct ext4_super_block *es); +extern void ext4_superblock_csum_set(struct super_block *sb); extern void *ext4_kvmalloc(size_t size, gfp_t flags); extern void *ext4_kvzalloc(size_t size, gfp_t flags); extern void ext4_kvfree(void *ptr); diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index bfa65b4..b4323ba 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -143,17 +143,13 @@ int __ext4_handle_dirty_super(const char *where, unsigned int line, struct buffer_head *bh = EXT4_SB(sb)->s_sbh; int err = 0; + ext4_superblock_csum_set(sb); if (ext4_handle_valid(handle)) { - ext4_superblock_csum_set(sb, - (struct ext4_super_block *)bh->b_data); err = jbd2_journal_dirty_metadata(handle, bh); if (err) ext4_journal_abort_handle(where, line, __func__, bh, handle, err); - } else { - ext4_superblock_csum_set(sb, - (struct ext4_super_block *)bh->b_data); + } else mark_buffer_dirty(bh); - } return err; } diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 982f6fc..5ededf1 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -143,9 +143,10 @@ int ext4_superblock_csum_verify(struct super_block *sb, return es->s_checksum == ext4_superblock_csum(sb, es); } -void ext4_superblock_csum_set(struct super_block *sb, - struct ext4_super_block *es) +void ext4_superblock_csum_set(struct super_block *sb) { + struct ext4_super_block *es = EXT4_SB(sb)->s_es; + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) return; @@ -4387,7 +4388,7 @@ static int ext4_commit_super(struct super_block *sb, int sync) cpu_to_le32(percpu_counter_sum_positive( &EXT4_SB(sb)->s_freeinodes_counter)); BUFFER_TRACE(sbh, "marking dirty"); - ext4_superblock_csum_set(sb, es); + ext4_superblock_csum_set(sb); mark_buffer_dirty(sbh); if (sync) { error = sync_dirty_buffer(sbh); -- cgit v0.10.2 From 973a6a76dc0b2a032b682ed7705828584bf87427 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 9 Oct 2012 16:25:13 -0300 Subject: ARM: mxc: platform-mxc-mmc: Fix register region size Do not hardcode the register region to SZ_4K as this is not correct for mx31. Use data->iosize instead which works for both mx27 and mx31 cases. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7..e7b920b 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, -- cgit v0.10.2 From a4bb8e69b17c59669c9480ee9c2e078b5e8a238e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 8 Oct 2012 08:46:06 +0200 Subject: ARM i.MX25: Fix lcdc_ipg_per parent clock It's per7, not per6. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d479..334c839 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,7 +127,7 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); -- cgit v0.10.2 From 1f441c435eb6967489860a590d4aa63828cab5e5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 9 Oct 2012 10:03:00 +0200 Subject: ARM i.MX25 clk: Fix nfc_ipg_per parent It's per8, there is no ipg_per clk. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 334c839..01e2f84 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -128,7 +128,7 @@ int __init mx25_clocks_init(void) clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); -- cgit v0.10.2 From 92063cee118655d25b50d04eb77b012f3287357a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 9 Oct 2012 10:04:04 +0200 Subject: ARM i.MX25: Fix PWM per clock lookups They are behind the gate pwm_ipg_per, not directly behind per10. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 01e2f84..840fdfa 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -203,13 +203,13 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.0"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.0"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.1"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.1"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.2"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0"); -- cgit v0.10.2 From 7386cdbf2f57ea8cff3c9fde93f206e58b9fe13f Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Wed, 10 Oct 2012 11:51:09 +0530 Subject: nohz: Fix idle ticks in cpu summary line of /proc/stat Git commit 09a1d34f8535ecf9 "nohz: Make idle/iowait counter update conditional" introduced a bug in regard to cpu hotplug. The effect is that the number of idle ticks in the cpu summary line in /proc/stat is still counting ticks for offline cpus. Reproduction is easy, just start a workload that keeps all cpus busy, switch off one or more cpus and then watch the idle field in top. On a dual-core with one cpu 100% busy and one offline cpu you will get something like this: %Cpu(s): 48.7 us, 1.3 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, %0.0 st The problem is that an offline cpu still has ts->idle_active == 1. To fix this we should make sure that the cpu is online when calling get_cpu_idle_time_us and get_cpu_iowait_time_us. [Srivatsa: Rebased to current mainline] Reported-by: Martin Schwidefsky Signed-off-by: Michal Hocko Reviewed-by: Srivatsa S. Bhat Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20121010061820.8999.57245.stgit@srivatsabhat.in.ibm.com Cc: deepthi@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 64c3b31..e296572 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -45,10 +45,13 @@ static cputime64_t get_iowait_time(int cpu) static u64 get_idle_time(int cpu) { - u64 idle, idle_time = get_cpu_idle_time_us(cpu, NULL); + u64 idle, idle_time = -1ULL; + + if (cpu_online(cpu)) + idle_time = get_cpu_idle_time_us(cpu, NULL); if (idle_time == -1ULL) - /* !NO_HZ so we can rely on cpustat.idle */ + /* !NO_HZ or cpu offline so we can rely on cpustat.idle */ idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE]; else idle = usecs_to_cputime64(idle_time); @@ -58,10 +61,13 @@ static u64 get_idle_time(int cpu) static u64 get_iowait_time(int cpu) { - u64 iowait, iowait_time = get_cpu_iowait_time_us(cpu, NULL); + u64 iowait, iowait_time = -1ULL; + + if (cpu_online(cpu)) + iowait_time = get_cpu_iowait_time_us(cpu, NULL); if (iowait_time == -1ULL) - /* !NO_HZ so we can rely on cpustat.iowait */ + /* !NO_HZ or cpu offline so we can rely on cpustat.iowait */ iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT]; else iowait = usecs_to_cputime64(iowait_time); -- cgit v0.10.2 From 8e49f418c9632790bf456634742d34d97120a784 Mon Sep 17 00:00:00 2001 From: Vaibhav Nagarnaik Date: Wed, 10 Oct 2012 16:40:27 -0700 Subject: ring-buffer: Check for uninitialized cpu buffer before resizing With a system where, num_present_cpus < num_possible_cpus, even if all CPUs are online, non-present CPUs don't have per_cpu buffers allocated. If per_cpu//buffer_size_kb is modified for such a CPU, it can cause a panic due to NULL dereference in ring_buffer_resize(). To fix this, resize operation is allowed only if the per-cpu buffer has been initialized. Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com Cc: stable@vger.kernel.org # 3.5+ Signed-off-by: Vaibhav Nagarnaik Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b32ed0e..b979426 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1567,6 +1567,10 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size, put_online_cpus(); } else { + /* Make sure this CPU has been intitialized */ + if (!cpumask_test_cpu(cpu_id, buffer->cpumask)) + goto out; + cpu_buffer = buffer->buffers[cpu_id]; if (nr_pages == cpu_buffer->nr_pages) -- cgit v0.10.2 From 065a13e2cc665f6547dc7e8a9d6b6565badf940a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 11 Oct 2012 16:26:06 +0200 Subject: Bluetooth: SMP: Fix setting unknown auth_req bits When sending a pairing request or response we should not just blindly copy the value that the remote device sent. Instead we should at least make sure to mask out any unknown bits. This is particularly critical from the upcoming LE Secure Connections feature perspective as incorrectly indicating support for it (by copying the remote value) would cause a failure to pair with devices that support it. Signed-off-by: Johan Hedberg Cc: stable@kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 8c225ef..2ac8d50 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -32,6 +32,8 @@ #define SMP_TIMEOUT msecs_to_jiffies(30000) +#define AUTH_REQ_MASK 0x07 + static inline void swap128(u8 src[16], u8 dst[16]) { int i; @@ -230,7 +232,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, req->max_key_size = SMP_MAX_ENC_KEY_SIZE; req->init_key_dist = 0; req->resp_key_dist = dist_keys; - req->auth_req = authreq; + req->auth_req = (authreq & AUTH_REQ_MASK); return; } @@ -239,7 +241,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE; rsp->init_key_dist = 0; rsp->resp_key_dist = req->resp_key_dist & dist_keys; - rsp->auth_req = authreq; + rsp->auth_req = (authreq & AUTH_REQ_MASK); } static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size) -- cgit v0.10.2 From 0153d5a810ab335aae86acfe69722a7efc1db536 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 11 Oct 2012 10:49:12 +0200 Subject: netfilter: xt_CT: fix timeout setting with IPv6 This patch fixes ip6tables and the CT target if it is used to set some custom conntrack timeout policy for IPv6. Use xt_ct_find_proto which already handles the ip6tables case for us. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 16c7125..ae7f5da 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -180,9 +180,9 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct ctnl_timeout *timeout; struct nf_conn_timeout *timeout_ext; - const struct ipt_entry *e = par->entryinfo; struct nf_conntrack_l4proto *l4proto; int ret = 0; + u8 proto; rcu_read_lock(); timeout_find_get = rcu_dereference(nf_ct_timeout_find_get_hook); @@ -192,9 +192,11 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, goto out; } - if (e->ip.invflags & IPT_INV_PROTO) { + proto = xt_ct_find_proto(par); + if (!proto) { ret = -EINVAL; - pr_info("You cannot use inversion on L4 protocol\n"); + pr_info("You must specify a L4 protocol, and not use " + "inversions on it.\n"); goto out; } @@ -214,7 +216,7 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, /* Make sure the timeout policy matches any existing protocol tracker, * otherwise default to generic. */ - l4proto = __nf_ct_l4proto_find(par->family, e->ip.proto); + l4proto = __nf_ct_l4proto_find(par->family, proto); if (timeout->l4proto->l4proto != l4proto->l4proto) { ret = -EINVAL; pr_info("Timeout policy `%s' can only be used by L4 protocol " -- cgit v0.10.2 From 939ccba437da1726a5c8a5b702a47d473da927ae Mon Sep 17 00:00:00 2001 From: Elison Niven Date: Mon, 15 Oct 2012 00:44:48 +0000 Subject: netfilter: xt_nat: fix incorrect hooks for SNAT and DNAT targets In (c7232c9 netfilter: add protocol independent NAT core), the hooks were accidentally modified: SNAT hooks are POST_ROUTING and LOCAL_IN (before it was LOCAL_OUT). DNAT hooks are PRE_ROUTING and LOCAL_OUT (before it was LOCAL_IN). Signed-off-by: Elison Niven Signed-off-by: Sanket Shah Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c index 81aafa8..bea7464 100644 --- a/net/netfilter/xt_nat.c +++ b/net/netfilter/xt_nat.c @@ -111,7 +111,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -123,7 +123,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, { @@ -133,7 +133,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -143,7 +143,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, }; -- cgit v0.10.2 From 44009105081b51417f311f4c3be0061870b6b8ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Oct 2012 10:18:35 +0300 Subject: oprofile, x86: Fix wrapping bug in op_x86_get_ctrl() The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by: Dan Carpenter Cc: v2.6.32.. Signed-off-by: Robert Richter diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 26b8a85..48768df 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -55,7 +55,7 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model, val |= counter_config->extra; event &= model->event_mask ? model->event_mask : 0xFF; val |= event & 0xFF; - val |= (event & 0x0F00) << 24; + val |= (u64)(event & 0x0F00) << 24; return val; } -- cgit v0.10.2 From 8fcdc31b3d09bc348ff9bf752ae1291828756cfa Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 12:26:04 -0400 Subject: NFSv4.1: Kill nfs4_ds_disconnect() There is nothing to prevent another thread from dereferencing ds->ds_clp during or after the call to nfs4_ds_disconnect(), and Oopsing due to the resulting NULL pointer. Instead, we should just rely on filelayout_mark_devid_invalid() to keep us out of trouble by avoiding that deviceid. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 52d8472..816c2d0 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -207,7 +207,6 @@ static int filelayout_async_handle_error(struct rpc_task *task, clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); _pnfs_return_layout(inode); rpc_wake_up(&tbl->slot_tbl_waitq); - nfs4_ds_disconnect(clp); /* fall through */ default: reset: diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h index dca47d78..8c07241 100644 --- a/fs/nfs/nfs4filelayout.h +++ b/fs/nfs/nfs4filelayout.h @@ -149,6 +149,5 @@ extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); extern void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); struct nfs4_file_layout_dsaddr * filelayout_get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags); -void nfs4_ds_disconnect(struct nfs_client *clp); #endif /* FS_NFS_NFS4FILELAYOUT_H */ diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 3336d5e..a8eaa9b 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -149,28 +149,6 @@ _data_server_lookup_locked(const struct list_head *dsaddrs) } /* - * Lookup DS by nfs_client pointer. Zero data server client pointer - */ -void nfs4_ds_disconnect(struct nfs_client *clp) -{ - struct nfs4_pnfs_ds *ds; - struct nfs_client *found = NULL; - - dprintk("%s clp %p\n", __func__, clp); - spin_lock(&nfs4_ds_cache_lock); - list_for_each_entry(ds, &nfs4_data_server_cache, ds_node) - if (ds->ds_clp && ds->ds_clp == clp) { - found = ds->ds_clp; - ds->ds_clp = NULL; - } - spin_unlock(&nfs4_ds_cache_lock); - if (found) { - set_bit(NFS_CS_STOP_RENEW, &clp->cl_res_state); - nfs_put_client(clp); - } -} - -/* * Create an rpc connection to the nfs4_pnfs_ds data server * Currently only supports IPv4 and IPv6 addresses */ -- cgit v0.10.2 From d527e5c15de8de813cd0a2ad0b769f68c6226938 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 13:43:38 -0400 Subject: NFSv4.1: Do not call pnfs_return_layout() from an rpciod context Move the call to pnfs_return_layout() to the read and write rpc_release() callbacks, so that it gets called from nfsiod, which is a more appropriate context. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 816c2d0..e7aee56 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -122,12 +122,21 @@ static void filelayout_reset_read(struct nfs_read_data *data) } } +static void filelayout_fenceme(struct inode *inode, struct pnfs_layout_hdr *lo) +{ + if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags)) + return; + clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); + pnfs_return_layout(inode); +} + static int filelayout_async_handle_error(struct rpc_task *task, struct nfs4_state *state, struct nfs_client *clp, struct pnfs_layout_segment *lseg) { - struct inode *inode = lseg->pls_layout->plh_inode; + struct pnfs_layout_hdr *lo = lseg->pls_layout; + struct inode *inode = lo->plh_inode; struct nfs_server *mds_server = NFS_SERVER(inode); struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg); struct nfs_client *mds_client = mds_server->nfs_client; @@ -204,8 +213,7 @@ static int filelayout_async_handle_error(struct rpc_task *task, dprintk("%s DS connection error %d\n", __func__, task->tk_status); nfs4_mark_deviceid_unavailable(devid); - clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); - _pnfs_return_layout(inode); + set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags); rpc_wake_up(&tbl->slot_tbl_waitq); /* fall through */ default: @@ -330,7 +338,9 @@ static void filelayout_read_count_stats(struct rpc_task *task, void *data) static void filelayout_read_release(void *data) { struct nfs_read_data *rdata = data; + struct pnfs_layout_hdr *lo = rdata->header->lseg->pls_layout; + filelayout_fenceme(lo->plh_inode, lo); nfs_put_client(rdata->ds_clp); rdata->header->mds_ops->rpc_release(data); } @@ -428,7 +438,9 @@ static void filelayout_write_count_stats(struct rpc_task *task, void *data) static void filelayout_write_release(void *data) { struct nfs_write_data *wdata = data; + struct pnfs_layout_hdr *lo = wdata->header->lseg->pls_layout; + filelayout_fenceme(lo->plh_inode, lo); nfs_put_client(wdata->ds_clp); wdata->header->mds_ops->rpc_release(data); } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 2d722db..dbf7bba 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -62,6 +62,7 @@ enum { NFS_LAYOUT_RW_FAILED, /* get rw layout failed stop trying */ NFS_LAYOUT_BULK_RECALL, /* bulk recall affecting layout */ NFS_LAYOUT_ROC, /* some lseg had roc bit set */ + NFS_LAYOUT_RETURN, /* Return this layout ASAP */ }; enum layoutdriver_policy_flags { -- cgit v0.10.2 From 1813badd98ce02e4b96d8997b68ddef4d4ad4ec5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 14:36:52 -0400 Subject: NFSv4.1: Use kcalloc() to allocate zeroed arrays instead of kzalloc() Don't circumvent the array size checks. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index e7aee56..2e45fd9 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -750,7 +750,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, goto out_err; if (fl->num_fh > 0) { - fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), + fl->fh_array = kcalloc(fl->num_fh, sizeof(fl->fh_array[0]), gfp_flags); if (!fl->fh_array) goto out_err; -- cgit v0.10.2 From 6863255bd0e48bc41ae5a066d5c771801e92735a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 15 Oct 2012 14:52:41 +0200 Subject: cfg80211/mac80211: avoid state mishmash on deauth Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b49890..f8cd4cf 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request { const u8 *ie; size_t ie_len; u16 reason_code; + bool local_state_change; }; /** diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e714ed8..e510a33 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3549,6 +3549,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx = !req->local_state_change; mutex_lock(&ifmgd->mtx); @@ -3565,12 +3566,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated && ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, frame_buf); + req->reason_code, tx, frame_buf); } else { drv_mgd_prepare_tx(sdata->local, sdata); ieee80211_send_deauth_disassoc(sdata, req->bssid, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, + req->reason_code, tx, frame_buf); } diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8016fee..904a7f3 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -457,20 +457,14 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, .reason_code = reason, .ie = ie, .ie_len = ie_len, + .local_state_change = local_state_change, }; ASSERT_WDEV_LOCK(wdev); - if (local_state_change) { - if (wdev->current_bss && - ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { - cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); - wdev->current_bss = NULL; - } - + if (local_state_change && (!wdev->current_bss || + !ether_addr_equal(wdev->current_bss->pub.bssid, bssid))) return 0; - } return rdev->ops->deauth(&rdev->wiphy, dev, &req); } -- cgit v0.10.2 From 76495ec1d47e1c0fe0673faf9179bda6bc8ab5c2 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 15 Oct 2012 12:56:49 -0400 Subject: ext4: fix undefined bit shift result in ext4_fill_flex_info The result of the bit shift expression in '1 << sbi->s_log_groups_per_flex' can be undefined in the case that s_log_groups_per_flex is 31 because the result of the shift is bigger than INT_MAX. In reality this probably should not cause much problems since we'll end up with INT_MIN which will then be converted into 'unsigned int' type, but nevertheless according to the ISO C99 the result is actually undefined. Fix this by changing the left operand to 'unsigned int' type. Note that the commit d50f2ab6f050311dbf7b8f5501b25f0bf64a439b already tried to fix the undefined behaviour, but this was missed. Thanks to Laszlo Ersek for pointing this out and suggesting the fix. Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" Reviewed-by: Carlos Maiolino Reported-by: Laszlo Ersek diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 5ededf1..8ab650b 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1970,7 +1970,7 @@ static int ext4_fill_flex_info(struct super_block *sb) sbi->s_log_groups_per_flex = 0; return 1; } - groups_per_flex = 1 << sbi->s_log_groups_per_flex; + groups_per_flex = 1U << sbi->s_log_groups_per_flex; err = ext4_alloc_flex_bg_array(sb, sbi->s_groups_count); if (err) -- cgit v0.10.2 From 4045f72bcf3c293c7c5932ef001742d8bb5ded76 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 2 Oct 2012 21:34:23 +0200 Subject: mac80211: check if key has TKIP type before updating IV This patch fix corruption which can manifest itself by following crash when switching on rfkill switch with rt2x00 driver: https://bugzilla.redhat.com/attachment.cgi?id=615362 Pointer key->u.ccmp.tfm of group key get corrupted in: ieee80211_rx_h_michael_mic_verify(): /* update IV in key information to be able to detect replays */ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP. We already check type of the key in different path in ieee80211_rx_h_michael_mic_verify() function, so adding additional check here is reasonable. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e72562a 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -106,7 +106,8 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) if (status->flag & RX_FLAG_MMIC_ERROR) goto mic_fail; - if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key) + if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key && + rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP) goto update_iv; return RX_CONTINUE; -- cgit v0.10.2 From e270b302e4771cde91e713ae17da31c1afc9a135 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 10 Oct 2012 11:13:06 -0700 Subject: brcmfmac: handle all exceptions as an error. in brcmf_usb_probe_cb only return code ENOLINK was seen as an error. This is wrong, all error codes should be returned to usb subsystem. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index a2b4b1e..7a6dfdc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1339,7 +1339,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo, } ret = brcmf_bus_start(dev); - if (ret == -ENOLINK) { + if (ret) { brcmf_dbg(ERROR, "dongle is not responding\n"); brcmf_detach(dev); goto fail; -- cgit v0.10.2 From a180b83bb1f036c587bdb93ac6171b94ff49133c Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:09 -0700 Subject: brcmfmac: use control channel in roamed status reporting Channel reported in scan results passed to cfg80211 is control channel. But chanspec is reported while notifying cfg80211 about roamed update. Cfg80211 complains because it could not find the bss in the list. Report control channel while calling cfg80211_roamed. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c1abaa6..48f08ae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4606,12 +4606,13 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, struct brcmf_cfg80211_profile *profile = cfg->profile; struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); struct wiphy *wiphy = cfg_to_wiphy(cfg); - struct brcmf_channel_info_le channel_le; - struct ieee80211_channel *notify_channel; + struct ieee80211_channel *notify_channel = NULL; struct ieee80211_supported_band *band; + struct brcmf_bss_info_le *bi; u32 freq; s32 err = 0; u32 target_channel; + u8 *buf; WL_TRACE("Enter\n"); @@ -4619,11 +4620,22 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, memcpy(profile->bssid, e->addr, ETH_ALEN); brcmf_update_bss_info(cfg); - brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le, - sizeof(channel_le)); + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto done; + } + + /* data sent to dongle has to be little endian */ + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX); + + if (err) + goto done; - target_channel = le32_to_cpu(channel_le.target_channel); - WL_CONN("Roamed to channel %d\n", target_channel); + bi = (struct brcmf_bss_info_le *)(buf + 4); + target_channel = bi->ctl_ch ? bi->ctl_ch : + CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec)); if (target_channel <= CH_MAX_2G_CHANNEL) band = wiphy->bands[IEEE80211_BAND_2GHZ]; @@ -4633,6 +4645,8 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, freq = ieee80211_channel_to_frequency(target_channel, band->band); notify_channel = ieee80211_get_channel(wiphy, freq); +done: + kfree(buf); cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid, conn_info->req_ie, conn_info->req_ie_len, conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL); -- cgit v0.10.2 From 5dd161ff7b46029c9da4f4ef8b214b8ba4316445 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:10 -0700 Subject: brcmfmac: set dongle mode accordingly when interface up The mode of WiFi dongle should be initialized in brcmf_cfg80211_up which get called when network interface is brought up. Otherwise brcmf_cfg80211_get_station would return error. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 48f08ae..2c66bae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -5200,41 +5200,6 @@ brcmf_cfg80211_event(struct net_device *ndev, schedule_work(&cfg->event_work); } -static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype) -{ - s32 infra = 0; - s32 err = 0; - - switch (iftype) { - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_WDS: - WL_ERR("type (%d) : currently we do not support this mode\n", - iftype); - err = -EINVAL; - return err; - case NL80211_IFTYPE_ADHOC: - infra = 0; - break; - case NL80211_IFTYPE_STATION: - infra = 1; - break; - case NL80211_IFTYPE_AP: - infra = 1; - break; - default: - err = -EINVAL; - WL_ERR("invalid type (%d)\n", iftype); - return err; - } - err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra); - if (err) { - WL_ERR("WLC_SET_INFRA error (%d)\n", err); - return err; - } - - return 0; -} - static s32 brcmf_dongle_eventmsg(struct net_device *ndev) { /* Room for "event_msgs" + '\0' + bitvec */ @@ -5453,7 +5418,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) WL_BEACON_TIMEOUT); if (err) goto default_conf_out; - err = brcmf_dongle_mode(ndev, wdev->iftype); + err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, + NULL, NULL); if (err && err != -EINPROGRESS) goto default_conf_out; err = brcmf_dongle_probecap(cfg); -- cgit v0.10.2 From 3e4f319dacc60c1b4537b85329d393ad18bf7501 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Oct 2012 11:13:12 -0700 Subject: brcmfmac: fix end of loop check (signedness bug) The problem here is that we loop until "remained_buf_len" is less than zero, but since it is unsigned, it never is. "remained_buf_len" has to be large enough to hold the value from "mgmt_ie_buf_len". That variable is type u32, but it only holds small values so I have changed to both variables to int. Also I removed the bogus initialization from "mgmt_ie_buf_len" so that GCC can detect if it is used unitialized. I moved the declaration of "remained_buf_len" closer to where it is used so it's easier to read. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Dan Carpenter Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2c66bae..411dfe7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3972,7 +3972,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, u8 *iovar_ie_buf; u8 *curr_ie_buf; u8 *mgmt_ie_buf = NULL; - u32 mgmt_ie_buf_len = 0; + int mgmt_ie_buf_len; u32 *mgmt_ie_len = 0; u32 del_add_ie_buf_len = 0; u32 total_ie_buf_len = 0; @@ -3982,7 +3982,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, struct parsed_vndr_ie_info *vndrie_info; s32 i; u8 *ptr; - u32 remained_buf_len; + int remained_buf_len; WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag); iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); -- cgit v0.10.2 From d4fa14cd62bd078c8e3ef39283b9f237e5b2ff0f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 10 Oct 2012 22:40:23 +0200 Subject: mac80211: use ieee80211_free_txskb in a few more places Free tx status skbs when draining power save buffers, pending frames, or when tearing down a vif. Fixes remaining conditions that can lead to hostapd/wpa_supplicant hangs when running out of socket write memory. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 6f8a73c..7de7717 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -853,7 +853,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (info->control.vif == &sdata->vif) { __skb_unlink(skb, &local->pending[i]); - dev_kfree_skb_irq(skb); + ieee80211_free_txskb(&local->hw, skb); } } } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 797dd36..0a4e4c0 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -650,7 +650,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, */ if (!skb) break; - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* @@ -679,7 +679,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, local->total_ps_buffered--; ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", sta->sta.addr); - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 22ca350..94e5868 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -406,7 +406,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local, int queue = info->hw_queue; if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); return; } @@ -431,7 +431,7 @@ void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); continue; } -- cgit v0.10.2 From 1fffa905adffbf0d3767fc978ef09afb830275eb Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 11 Oct 2012 14:05:15 +0200 Subject: bcma: fix unregistration of cores When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka Reviewed-by: Arend Van Spriel Signed-off-by: Piotr Haber Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 432aeee..d865470 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -158,9 +158,10 @@ static int bcma_register_cores(struct bcma_bus *bus) static void bcma_unregister_cores(struct bcma_bus *bus) { - struct bcma_device *core; + struct bcma_device *core, *tmp; - list_for_each_entry(core, &bus->cores, list) { + list_for_each_entry_safe(core, tmp, &bus->cores, list) { + list_del(&core->list); if (core->dev_registered) device_unregister(&core->dev); } -- cgit v0.10.2 From bf11315eeda510ea4fc1a2bf972d8155d31d89b4 Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Mon, 15 Oct 2012 14:14:32 +0000 Subject: net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx() The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [] error_code+0x67/0x6c [67607.676067] [] ? skb_put+0x91/0xa0 [67607.676067] [] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 935120f..768bf61 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -10472,7 +10472,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv, } else len = src->len; - dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC); + dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC); if (!dst) continue; -- cgit v0.10.2 From d79550a7bc35c16476ebdc27c78378d8093390ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 11 Oct 2012 09:56:35 +0300 Subject: gpio-timberdale: fix a potential wrapping issue ->last_ier is an unsigned long but the high bits can't be used int the original code because the shift wraps. Cc: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c index 031c6ad..1a3e2b9 100644 --- a/drivers/gpio/gpio-timberdale.c +++ b/drivers/gpio/gpio-timberdale.c @@ -116,7 +116,7 @@ static void timbgpio_irq_disable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier &= ~(1 << offset); + tgpio->last_ier &= ~(1UL << offset); iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } @@ -128,7 +128,7 @@ static void timbgpio_irq_enable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier |= 1 << offset; + tgpio->last_ier |= 1UL << offset; iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } -- cgit v0.10.2 From 92f79db1af9ff8d525dc24fa43116bd2c70ef45b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 14 Oct 2012 12:11:55 +0200 Subject: m68k: Remove empty #ifdef/#else/#endif block Leftover from commit 10b3a979347d4aba7de19e8d33eb8b87fe2a11dd ("UAPI: (Scripted) Disintegrate arch/m68k/include/asm") Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h index 0f78ccd..0f71704 100644 --- a/arch/m68k/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace.h @@ -4,9 +4,6 @@ #include #ifndef __ASSEMBLY__ -#ifdef CONFIG_COLDFIRE -#else -#endif #ifndef PS_S #define PS_S (0x2000) -- cgit v0.10.2 From 39013bd60e79148961583402ed70bd105f95d260 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 15 Oct 2012 14:13:25 +0100 Subject: ASoC: Ux500: Dispose of device nodes correctly When of_parse_phandle() is used to find a device node, its reference count is incremented by the helper. Once we're finished with them, it's our responsibly to ensure they are freed in the correct manor. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Mark Brown diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 356611d..54f7e25 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -57,6 +57,20 @@ static struct snd_soc_card mop500_card = { .num_links = ARRAY_SIZE(mop500_dai_links), }; +static void mop500_of_node_put(void) +{ + int i; + + for (i = 0; i < 2; i++) { + if (mop500_dai_links[i].cpu_of_node) + of_node_put((struct device_node *) + mop500_dai_links[i].cpu_of_node); + if (mop500_dai_links[i].codec_of_node) + of_node_put((struct device_node *) + mop500_dai_links[i].codec_of_node); + } +} + static int __devinit mop500_of_probe(struct platform_device *pdev, struct device_node *np) { @@ -69,6 +83,7 @@ static int __devinit mop500_of_probe(struct platform_device *pdev, if (!(msp_np[0] && msp_np[1] && codec_np)) { dev_err(&pdev->dev, "Phandle missing or invalid\n"); + mop500_of_node_put(); return -EINVAL; } @@ -83,6 +98,7 @@ static int __devinit mop500_of_probe(struct platform_device *pdev, return 0; } + static int __devinit mop500_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -128,6 +144,7 @@ static int __devexit mop500_remove(struct platform_device *pdev) snd_soc_unregister_card(mop500_card); mop500_ab8500_remove(mop500_card); + mop500_of_node_put(); return 0; } -- cgit v0.10.2 From 05304949332c6d2c7b50f2d0f666a52369f09ced Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 15 Oct 2012 14:13:26 +0100 Subject: ASoC: ux500_msp_i2s: Fix devm_* and return code merge error Some ux500_msp_i2s patches clashed with: b18e93a493626c1446f9788ebd5844d008bbf71c ASoC: ux500_msp_i2s: better use devm functions and fix error return code ... leaving the driver uncompilable. This patch fixes the issues encountered. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Mark Brown diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index b7c996e..a26c6bf 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -697,14 +698,11 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, platform_data = devm_kzalloc(&pdev->dev, sizeof(struct msp_i2s_platform_data), GFP_KERNEL); if (!platform_data) - ret = -ENOMEM; + return -ENOMEM; } } else if (!platform_data) - ret = -EINVAL; - - if (ret) - goto err_res; + return -EINVAL; dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, pdev->name, platform_data->id); -- cgit v0.10.2 From 6478d414fe4ee3114e760fb6d6df0f8e2f66186a Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sun, 14 Oct 2012 16:33:11 +0200 Subject: DRM/i915: Don't delete DPLL Multiplier during DAC init. The DPLL multipiler is set up in intel_display.c:i9xx_update_pll() called from i9xx_crtc_mode_set(). There the DPLL multiplier is adjusted so that the SDVO gets a sufficient bus clock. When cloning a CRTC between an SDVO driven encoder and the standard DAC the DAC setup code reseted the multiplier value to 1 thus undoing the correct setup. There is no need to touch the multiplier in the DAC setup code: the correct value (i.e. 1 in case no SDVO encoder is used) is set by i9xx_update_pll() already. A comment at the code suggested that this code is a left over from the days when there was no setup for clone modes. Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index c42b980..ae3a3d5 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -220,20 +220,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, intel_encoder_to_crt(to_intel_encoder(encoder)); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_i915_private *dev_priv = dev->dev_private; - int dpll_md_reg; - u32 adpa, dpll_md; - - dpll_md_reg = DPLL_MD(intel_crtc->pipe); - - /* - * Disable separate mode multiplier used when cloning SDVO to CRT - * XXX this needs to be adjusted when we really are cloning - */ - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - dpll_md = I915_READ(dpll_md_reg); - I915_WRITE(dpll_md_reg, - dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); - } + u32 adpa; adpa = ADPA_HOTPLUG_BITS; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) -- cgit v0.10.2 From 5f85f176c2f1c9d2a23f60ca0b99e4d0aa5a26a7 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sun, 14 Oct 2012 15:46:38 +0200 Subject: DRM/i915: Add QUIRK_INVERT_BRIGHTNESS for NCR machines. NCR machines with LVDS panels using Intel chipsets need to have the QUIRK_INVERT_BRIGHTNESS bit set. Unfortunately NCR doesn't set a meaningful subvendor/subdevice ID, therefore we add a DMI dependent quirk list. Signed-off-by: Egbert Eich [danvet: fixup whitespace fail.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3511eff..68495da 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7892,6 +7892,34 @@ struct intel_quirk { void (*hook)(struct drm_device *dev); }; +/* For systems that don't have a meaningful PCI subdevice/subvendor ID */ +struct intel_dmi_quirk { + void (*hook)(struct drm_device *dev); + const struct dmi_system_id (*dmi_id_list)[]; +}; + +static int intel_dmi_reverse_brightness(const struct dmi_system_id *id) +{ + DRM_INFO("Backlight polarity reversed on %s\n", id->ident); + return 1; +} + +static const struct intel_dmi_quirk intel_dmi_quirks[] = { + { + .dmi_id_list = &(const struct dmi_system_id[]) { + { + .callback = intel_dmi_reverse_brightness, + .ident = "NCR Corporation", + .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, ""), + }, + }, + { } /* terminating entry */ + }, + .hook = quirk_invert_brightness, + }, +}; + static struct intel_quirk intel_quirks[] = { /* HP Mini needs pipe A force quirk (LP: #322104) */ { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, @@ -7931,6 +7959,10 @@ static void intel_init_quirks(struct drm_device *dev) q->subsystem_device == PCI_ANY_ID)) q->hook(dev); } + for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) { + if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0) + intel_dmi_quirks[i].hook(dev); + } } /* Disable the VGA plane that we never use */ -- cgit v0.10.2 From e3b86d6941c7e5f90be05d986fce1fcb40c68d6b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sat, 13 Oct 2012 14:30:15 +0200 Subject: DRM/i915: Don't clone SDVO LVDS with analog. SDVO LVDS are not clonable as the input mode gets adjusted by the LVDS encoder. Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 39c3198..3a7251a 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2278,10 +2278,8 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; } - /* SDVO LVDS is cloneable because the SDVO encoder does the upscaling, - * as opposed to native LVDS, where we upscale with the panel-fitter - * (and hence only the native LVDS resolution could be cloned). */ - intel_sdvo->base.cloneable = true; + /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */ + intel_sdvo->base.cloneable = false; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) -- cgit v0.10.2 From e751823da27d37d25e5543abef2dc031f8813bc8 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sat, 13 Oct 2012 14:29:31 +0200 Subject: DRM/i915: Restore sdvo_flags after dtd->mode->dtd Roundrtrip. For TV and LVDS encoders intel_sdvo_set_input_timings_for_mode() is called to pass a mode to the sdvo chip and retrieve a dtd containing information needed to calculate the adjusted_mode which is done by intel_sdvo_get_dtd_from_mode(). To set this adjusted_mode as input mode for the sdvo chip, a dtd is recalculated using intel_sdvo_get_mode_from_dtd(). During this round trip the sdvo_flags contained in the dtd obtained from the hardware are lost. Since these flags cannot be ignored in all cases this patch preserves and restores them. This regression has been introduced in commit 6651819b4b4fc3caa6964c5d825eb4bb996f3905 Author: Daniel Vetter Date: Sun Apr 1 19:16:18 2012 +0200 drm/i915: handle input/output sdvo timings separately in mode_set Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 3a7251a..d2e8c9f 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -140,6 +140,11 @@ struct intel_sdvo { /* DDC bus used by this SDVO encoder */ uint8_t ddc_bus; + + /* + * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd + */ + uint8_t dtd_sdvo_flags; }; struct intel_sdvo_connector { @@ -985,6 +990,7 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo, return false; intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags; return true; } @@ -1093,6 +1099,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, * adjusted_mode. */ intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) + input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags; if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd)) DRM_INFO("Setting input timings on %s failed\n", SDVO_NAME(intel_sdvo)); -- cgit v0.10.2 From b06fbda328490ec471e72659a9bf69f16a1c8dc9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 16 Oct 2012 09:50:25 +0200 Subject: Revert "drm/i915: Try harder to complete DP training pattern 1" This reverts commit 2477367083b3eaa97f87993ab26627a02f350551. If (for whatever reason) the DP sink device never asks for the maximal voltage level, we never don't hit the check that should bail us out after 5 retries of the same voltage. Which leads to an endless loop in the DP link training code, which hangs the driver. Now some more DP link training experiments on eDP panels seem to indicate that our training algorithm isn't robust enough anyway and needs more work. Hence for 3.7-fixes, let's just revert the regressing commit instead of trying to apply more duct-tape. Reported-by: Oleksij Rempel Acked-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index bd2c34a..e37ca2c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1798,7 +1798,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; if (i == intel_dp->lane_count && voltage_tries == 5) { - if (++loop_tries == 5) { + ++loop_tries; + if (loop_tries == 5) { DRM_DEBUG_KMS("too many full retries, give up\n"); break; } @@ -1808,11 +1809,15 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) } /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) { - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - voltage_tries = 0; - } else + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); + break; + } + } else + voltage_tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ intel_get_adjust_train(intel_dp, link_status); -- cgit v0.10.2 From 78bef24e8477653853eb028dfc18471f05e54955 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 8 Oct 2012 11:33:05 +0100 Subject: MAINTAINERS: Add EFI git repository location People keep asking for the whereabouts of this git tree, so add it to MAINTAINERS. Signed-off-by: Matt Fleming diff --git a/MAINTAINERS b/MAINTAINERS index e73060f..fe95ef1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2801,6 +2801,7 @@ F: sound/usb/misc/ua101.c EXTENSIBLE FIRMWARE INTERFACE (EFI) M: Matt Fleming L: linux-efi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git S: Maintained F: Documentation/x86/efi-stub.txt F: arch/ia64/kernel/efi.c -- cgit v0.10.2 From c2ff5cf5294bcbd7fa50f7d860e90a66db7e5059 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 16 Oct 2012 14:52:51 +0200 Subject: iommu/amd: Work around wrong IOAPIC device-id in IVRS table On some systems the BIOS puts the wrong device-id for the IO-APIC into the IVRS table. The result is that interrupt remapping is not working for the IO-APIC irqs. This usually means a kernel panic at boot because the timer is not working. Fix this kernel panic by disabling interrupt remapping if this problem is discovered in the IVRS table. Reported-by: Andrew Oakley Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 18b0d99..81837b0 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1599,21 +1599,46 @@ static void __init free_on_init_error(void) #endif } +/* SB IOAPIC is always on this device in AMD systems */ +#define IOAPIC_SB_DEVID ((0x00 << 8) | PCI_DEVFN(0x14, 0)) + static bool __init check_ioapic_information(void) { + bool ret, has_sb_ioapic; int idx; - for (idx = 0; idx < nr_ioapics; idx++) { - int id = mpc_ioapic_id(idx); + has_sb_ioapic = false; + ret = false; - if (get_ioapic_devid(id) < 0) { - pr_err(FW_BUG "AMD-Vi: IO-APIC[%d] not in IVRS table\n", id); - pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug\n"); - return false; + for (idx = 0; idx < nr_ioapics; idx++) { + int devid, id = mpc_ioapic_id(idx); + + devid = get_ioapic_devid(id); + if (devid < 0) { + pr_err(FW_BUG "AMD-Vi: IOAPIC[%d] not in IVRS table\n", id); + ret = false; + } else if (devid == IOAPIC_SB_DEVID) { + has_sb_ioapic = true; + ret = true; } } - return true; + if (!has_sb_ioapic) { + /* + * We expect the SB IOAPIC to be listed in the IVRS + * table. The system timer is connected to the SB IOAPIC + * and if we don't have it in the list the system will + * panic at boot time. This situation usually happens + * when the BIOS is buggy and provides us the wrong + * device id for the IOAPIC in the system. + */ + pr_err(FW_BUG "AMD-Vi: No southbridge IOAPIC found in IVRS table\n"); + } + + if (!ret) + pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug(s)\n"); + + return ret; } static void __init free_dma_resources(void) -- cgit v0.10.2 From 8f7b8db6e0557c8437adf9371e020cd89a7e85dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 25 Sep 2012 16:40:12 +0200 Subject: iwlwifi: fix 6000 series channel switch command The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 349c205..da58620 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -518,7 +518,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, * See iwlagn_mac_channel_switch. */ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; + struct iwl6000_channel_switch_cmd *cmd; u32 switch_time_in_usec, ucode_switch_time; u16 ch; u32 tsf_low; @@ -527,18 +527,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, struct ieee80211_vif *vif = ctx->vif; struct iwl_host_cmd hcmd = { .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, + .len = { sizeof(*cmd), }, .flags = CMD_SYNC, - .data = { &cmd, }, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, }; + int err; - cmd.band = priv->band == IEEE80211_BAND_2GHZ; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + hcmd.data[0] = cmd; + + cmd->band = priv->band == IEEE80211_BAND_2GHZ; ch = ch_switch->channel->hw_value; IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; + cmd->channel = cpu_to_le16(ch); + cmd->rxon_flags = ctx->staging.flags; + cmd->rxon_filter_flags = ctx->staging.filter_flags; switch_count = ch_switch->count; tsf_low = ch_switch->timestamp & 0x0ffffffff; /* @@ -554,23 +561,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, switch_count = 0; } if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time); else { switch_time_in_usec = vif->bss_conf.beacon_int * switch_count * TIME_UNIT; ucode_switch_time = iwl_usecs_to_beacons(priv, switch_time_in_usec, beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); + cmd->switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + cmd->switch_time); + cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; - return iwl_dvm_send_cmd(priv, &hcmd); + err = iwl_dvm_send_cmd(priv, &hcmd); + kfree(cmd); + return err; } struct iwl_lib_ops iwl6000_lib = { -- cgit v0.10.2 From d6aa6a81d41eb48125b4622306b61dd398923ad9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:32:24 -0400 Subject: NFSv4: fs/nfs/nfs4getroot.c needs to include "internal.h" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a warning about "no previous prototype for ‘nfs4_get_rootfh’" Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4getroot.c b/fs/nfs/nfs4getroot.c index 6a83780..549462e 100644 --- a/fs/nfs/nfs4getroot.c +++ b/fs/nfs/nfs4getroot.c @@ -5,6 +5,7 @@ #include #include "nfs4_fs.h" +#include "internal.h" #define NFSDBG_FACILITY NFSDBG_CLIENT -- cgit v0.10.2 From 2e928e4878fbc6328c2b1fc897d008db257bfbb0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:34:56 -0400 Subject: NFSv4.1: Declare osd_pri_2_pnfs_err(), objio_init_read/write to be static Signed-off-by: Trond Myklebust diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index be731e6..c6f9906 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -369,7 +369,7 @@ void objio_free_result(struct objlayout_io_res *oir) kfree(objios); } -enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep) +static enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep) { switch (oep) { case OSD_ERR_PRI_NO_ERROR: @@ -574,7 +574,7 @@ static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, (unsigned long)pgio->pg_layout_private; } -void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +static void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) { pnfs_generic_pg_init_read(pgio, req); if (unlikely(pgio->pg_lseg == NULL)) @@ -604,7 +604,7 @@ static bool aligned_on_raid_stripe(u64 offset, struct ore_layout *layout, return false; } -void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +static void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) { unsigned long stripe_end = 0; u64 wb_size; -- cgit v0.10.2 From e9b7e91745fa9df94900c8ab08e633f336686098 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:30:44 -0400 Subject: NFSv4: Fix the return value for nfs_callback_start_svc returning PTR_ERR(cb_info->task) just after we have set it to NULL looks like a typo... Signed-off-by: Trond Myklebust Cc: Stanislav Kinsbursky diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c index 9a521fb..5088b57 100644 --- a/fs/nfs/callback.c +++ b/fs/nfs/callback.c @@ -241,7 +241,7 @@ static int nfs_callback_start_svc(int minorversion, struct rpc_xprt *xprt, svc_exit_thread(cb_info->rqst); cb_info->rqst = NULL; cb_info->task = NULL; - return PTR_ERR(cb_info->task); + return ret; } dprintk("nfs_callback_up: service started\n"); return 0; -- cgit v0.10.2 From a48221a26e4914b7e2d8a1749b6115212bac8bee Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 16 Oct 2012 15:24:01 +0200 Subject: gpio-74x164: Fix buffer allocation size The new registers handling in the gpio-74x164 driver allocates chip->registers * 8 bytes where only one byte per register is necessary. This patch fixes this. Signed-off-by: Roland Stigge Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index ed3e551..f05e542 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -153,7 +153,7 @@ static int __devinit gen_74x164_probe(struct spi_device *spi) } chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL); + chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); if (!chip->buffer) { ret = -ENOMEM; goto exit_destroy; -- cgit v0.10.2 From 1f5320d5972aa50d3e8d2b227b636b370e608359 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 4 Oct 2012 16:37:16 +0900 Subject: cgroup: notify_on_release may not be triggered in some cases notify_on_release must be triggered when the last process in a cgroup is move to another. But if the first(and only) process in a cgroup is moved to another, notify_on_release is not triggered. # mkdir /cgroup/cpu/SRC # mkdir /cgroup/cpu/DST # # echo 1 >/cgroup/cpu/SRC/notify_on_release # echo 1 >/cgroup/cpu/DST/notify_on_release # # sleep 300 & [1] 8629 # # echo 8629 >/cgroup/cpu/SRC/tasks # echo 8629 >/cgroup/cpu/DST/tasks -> notify_on_release for /SRC must be triggered at this point, but it isn't. This is because put_css_set() is called before setting CGRP_RELEASABLE in cgroup_task_migrate(), and is a regression introduce by the commit:74a1166d(cgroups: make procs file writable), which was merged into v3.0. Cc: Ben Blum Cc: # v3.0.x and later Acked-by: Li Zefan Signed-off-by: Daisuke Nishimura Signed-off-by: Tejun Heo diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 13774b3..d1739fc 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1962,9 +1962,8 @@ static void cgroup_task_migrate(struct cgroup *cgrp, struct cgroup *oldcgrp, * trading it for newcg is protected by cgroup_mutex, we're safe to drop * it here; it will be freed under RCU. */ - put_css_set(oldcg); - set_bit(CGRP_RELEASABLE, &oldcgrp->flags); + put_css_set(oldcg); } /** -- cgit v0.10.2 From d856f1eb56ae3d935fb502441aa37b650aeba683 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 14 Oct 2012 04:32:55 +0200 Subject: spi: mxs: Assign message status after transfer finished In the current code implementing the MXS SPI driver, every transferred message had assigned status = 0, which is not correct. Properly assign status returned from the I/O functions. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index edf1360..5a63bcd 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -480,7 +480,7 @@ static int mxs_spi_transfer_one(struct spi_master *master, first = last = 0; } - m->status = 0; + m->status = status; spi_finalize_current_message(master); return status; -- cgit v0.10.2 From 44968466cfb969f960dbe422bbc785117f497729 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 14 Oct 2012 04:32:56 +0200 Subject: spi: mxs: Terminate DMA in case of DMA timeout In case the SPI DMA times out, the DMA might still be in some kind of inconsistent state. Issue dmaengine_terminate_all() on the particular channel to kill off all operations before continuing. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 5a63bcd..86dd04d 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -323,6 +323,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, if (!ret) { dev_err(ssp->dev, "DMA transfer timeout\n"); ret = -ETIMEDOUT; + dmaengine_terminate_all(ssp->dmach); goto err_vmalloc; } -- cgit v0.10.2 From 0243c53634987ce7a3d1e39ae55c17800d9436c8 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Thu, 2 Aug 2012 17:17:33 +0900 Subject: spi: spi-rspi: fix build error for the latest shdma driver Because the latest shdma driver changed, it caused build error in the spi-rspi driver. This patch fixed the build error. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 4894bde..30faf6d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -147,8 +147,6 @@ struct rspi_data { unsigned char spsr; /* for dmaengine */ - struct sh_dmae_slave dma_tx; - struct sh_dmae_slave dma_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; int irq; @@ -663,20 +661,16 @@ static irqreturn_t rspi_irq(int irq, void *_sr) return ret; } -static bool rspi_filter(struct dma_chan *chan, void *filter_param) -{ - chan->private = filter_param; - return true; -} - -static void __devinit rspi_request_dma(struct rspi_data *rspi, - struct platform_device *pdev) +static int __devinit rspi_request_dma(struct rspi_data *rspi, + struct platform_device *pdev) { struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; dma_cap_mask_t mask; + struct dma_slave_config cfg; + int ret; if (!rspi_pd) - return; + return 0; /* The driver assumes no error. */ rspi->dma_width_16bit = rspi_pd->dma_width_16bit; @@ -684,21 +678,35 @@ static void __devinit rspi_request_dma(struct rspi_data *rspi, if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_rx.slave_id = rspi_pd->dma_rx_id; - rspi->chan_rx = dma_request_channel(mask, rspi_filter, - &rspi->dma_rx); - if (rspi->chan_rx) - dev_info(&pdev->dev, "Use DMA when rx.\n"); + rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_rx_id); + if (rspi->chan_rx) { + cfg.slave_id = rspi_pd->dma_rx_id; + cfg.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(rspi->chan_rx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when rx.\n"); + else + return ret; + } } if (rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_tx.slave_id = rspi_pd->dma_tx_id; - rspi->chan_tx = dma_request_channel(mask, rspi_filter, - &rspi->dma_tx); - if (rspi->chan_tx) - dev_info(&pdev->dev, "Use DMA when tx\n"); + rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_tx_id); + if (rspi->chan_tx) { + cfg.slave_id = rspi_pd->dma_tx_id; + cfg.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(rspi->chan_tx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when tx\n"); + else + return ret; + } } + + return 0; } static void __devexit rspi_release_dma(struct rspi_data *rspi) @@ -788,7 +796,11 @@ static int __devinit rspi_probe(struct platform_device *pdev) } rspi->irq = irq; - rspi_request_dma(rspi, pdev); + ret = rspi_request_dma(rspi, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "rspi_request_dma failed.\n"); + goto error4; + } ret = spi_register_master(master); if (ret < 0) { -- cgit v0.10.2 From 2f5f1ce90a5fa097372bb895452a718e4d33e4e3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 17 Aug 2012 14:47:30 +0300 Subject: spi: tsc2005: delete soon-obsolete e-mail address Delete soon-obsolete e-mail address. Signed-off-by: Aaro Koskinen Signed-off-by: Mark Brown diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h index d9b0c84..8f721e4 100644 --- a/include/linux/spi/tsc2005.h +++ b/include/linux/spi/tsc2005.h @@ -3,8 +3,6 @@ * * Copyright (C) 2009-2010 Nokia Corporation * - * Contact: Aaro Koskinen - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or -- cgit v0.10.2 From 308b3afb97dc342e9c4f958d8b4c459ae0e22bd7 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 17 Oct 2012 16:47:11 +0900 Subject: ARM: SAMSUNG: Add naming of s3c64xx-spi devices Commit a5238e360b71 (spi: s3c64xx: move controller information into driver data) introduced separate device names for the different subtypes of the spi controller but forgot to set these in the relevant machines. To fix this introduce a s3c64xx_spi_setname function and populate all Samsung arches with the correct names. The function resides in a new header, as the s3c64xx-spi.h contains driver platform data and should therefore at some later point move out of the Samsung include dir. Tested on a s3c2416-based machine. Signed-off-by: Heiko Stuebner Cc: Stable Reviewed-by: Sylwester Nawrocki [s.nawrocki@samsung.com: tested on mach-exynos] Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690..1947be8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ec..77ee0b7 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include #include #include +#include static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad..165b6a6 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include #include #include +#include static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9..111e404 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 6219086..cc6e561 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e902..a0c50ef 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 0000000..0b9428a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ -- cgit v0.10.2 From 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 Oct 2012 22:33:29 +0000 Subject: netfilter: xt_TEE: don't use destination address found in header Torsten Luettgert bisected TEE regression starting with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the original destination address of the forwarded packet, not the address of the gateway. Fix this using FLOWI_FLAG_KNOWN_NH Julian added in commit c92b96553a80c1 (ipv4: Add FLOWI_FLAG_KNOWN_NH), so that known nexthop (info->gw.ip) has preference on resolving. Reported-by: Torsten Luettgert Bisected-by: Torsten Luettgert Tested-by: Torsten Luettgert Cc: Julian Anastasov Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c index ee2e5bc..bd93e51 100644 --- a/net/netfilter/xt_TEE.c +++ b/net/netfilter/xt_TEE.c @@ -70,6 +70,7 @@ tee_tg_route4(struct sk_buff *skb, const struct xt_tee_tginfo *info) fl4.daddr = info->gw.ip; fl4.flowi4_tos = RT_TOS(iph->tos); fl4.flowi4_scope = RT_SCOPE_UNIVERSE; + fl4.flowi4_flags = FLOWI_FLAG_KNOWN_NH; rt = ip_route_output_key(net, &fl4); if (IS_ERR(rt)) return false; -- cgit v0.10.2 From 59cf19a4fa2b8832f04f4c2b846c7cade52e475d Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 17 Oct 2012 18:10:34 +0900 Subject: ARM: dts: Split memory into 4 sections for exynos4210-trats Since the maximum section size on mach-exynos is set to 256MiB, boards with memory configuration defined using sections bigger than 256MiB will fail to boot with a kernel panic. This patch modifies the dts file of Samsung Trats board to define four sections of 256MiB instead of two of 512MiB to fix the boot problem. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b8..a21511c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { -- cgit v0.10.2 From a7c2e1aad6c846f316641bbaa54cf999aeaa7ebc Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 17 Oct 2012 11:17:16 +0200 Subject: drm/i915: shut up spurious WARN in the gtt fault handler -ENOSPC can happen if userspace is being simplistic and tries to map a too big object. To aid further spurious WARN debugging, also print out the error code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56017 Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index bb941f8..45888d2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1408,8 +1408,10 @@ out: return VM_FAULT_NOPAGE; case -ENOMEM: return VM_FAULT_OOM; + case -ENOSPC: + return VM_FAULT_SIGBUS; default: - WARN_ON_ONCE(ret); + WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret); return VM_FAULT_SIGBUS; } } -- cgit v0.10.2 From 3a40414f826a8f1096d9b94c4a53ef91b25ba28d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 1 Oct 2012 15:52:00 +0200 Subject: mac80211: connect with HT20 if HT40 is not permitted Some changes to fix issues with HT40 APs in Korea and follow-up changes to allow using HT40 even if the local regulatory database disallows it caused issues with iwlwifi (and could cause issues with other devices); iwlwifi firmware would assert if you tried to connect to an AP that has an invalid configuration (e.g. using HT40- on channel 140.) Fix this, while avoiding the "Korean AP" issue by disabling HT40 and advertising HT20 to the AP when connecting. Cc: stable@vger.kernel.org [3.6] Reported-by: Florian Reitmeir Tested-by: Florian Reitmeir Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e510a33..1b7eed2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3099,22 +3099,32 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ht_cfreq, ht_oper->primary_chan, cbss->channel->band); ht_oper = NULL; + } else { + channel_type = NL80211_CHAN_HT20; } } - if (ht_oper) { - channel_type = NL80211_CHAN_HT20; + if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + /* + * cfg80211 already verified that the channel itself can + * be used, but it didn't check that we can do the right + * HT type, so do that here as well. If HT40 isn't allowed + * on this channel, disable 40 MHz operation. + */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & - IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40PLUS; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40MINUS; - break; - } + break; } } -- cgit v0.10.2 From 5784ee4dcbb896f5367855540b264e21a0c33854 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Mon, 15 Oct 2012 15:50:25 +0800 Subject: regmap: select REGMAP if REGMAP_MMIO and REGMAP_IRQ enabled The regmap_mmio and regmap_irq depend on regmap core, if not select, we may not compile regmap core and meet compiling errors as follows if REGMAP_MMIO is selected by client drivers: drivers/mfd/syscon.c:94:15: error: variable 'syscon_regmap_config' has initializer but incomplete type drivers/mfd/syscon.c:95:2: error: unknown field 'reg_bits' specified in initializer drivers/mfd/syscon.c:95:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:95:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c:96:2: error: unknown field 'val_bits' specified in initializer drivers/mfd/syscon.c:96:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:96:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c:97:2: error: unknown field 'reg_stride' specified in initializer drivers/mfd/syscon.c:97:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:97:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c: In function 'syscon_probe': drivers/mfd/syscon.c:124:2: error: invalid use of undefined type 'struct regmap_config' drivers/mfd/syscon.c:125:2: error: implicit declaration of function 'devm_regmap_init_mmio' [-Werror=implicit-function-declaration] drivers/mfd/syscon.c:125:17: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors drivers/mfd/Kconfig: config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registers via regmap. Signed-off-by: Dong Aisheng Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 6be390b..f0d3054 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -3,7 +3,7 @@ # subsystems should select the appropriate symbols. config REGMAP - default y if (REGMAP_I2C || REGMAP_SPI) + default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_MMIO || REGMAP_IRQ) select LZO_COMPRESS select LZO_DECOMPRESS select IRQ_DOMAIN if REGMAP_IRQ -- cgit v0.10.2 From 4e7a4b01222343481d8ff084dbef9b80f7089a19 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Tue, 16 Oct 2012 11:38:06 +0200 Subject: jfs: Fix FITRIM argument handling Currently when 'range->start' is beyond the end of file system nothing is done and that fact is ignored, where in fact we should return EINVAL. The same problem is when 'range.len' is smaller than file system block. Fix this by adding check for such conditions and return EINVAL appropriately. Signed-off-by: Lukas Czerner Acked-by: Tino Reichardt Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/jfs_discard.c b/fs/jfs/jfs_discard.c index 9947563..dfcd503 100644 --- a/fs/jfs/jfs_discard.c +++ b/fs/jfs/jfs_discard.c @@ -83,7 +83,7 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range) struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap; struct super_block *sb = ipbmap->i_sb; int agno, agno_end; - s64 start, end, minlen; + u64 start, end, minlen; u64 trimmed = 0; /** @@ -93,15 +93,19 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range) * minlen: minimum extent length in Bytes */ start = range->start >> sb->s_blocksize_bits; - if (start < 0) - start = 0; end = start + (range->len >> sb->s_blocksize_bits) - 1; - if (end >= bmp->db_mapsize) - end = bmp->db_mapsize - 1; minlen = range->minlen >> sb->s_blocksize_bits; - if (minlen <= 0) + if (minlen == 0) minlen = 1; + if (minlen > bmp->db_agsize || + start >= bmp->db_mapsize || + range->len < sb->s_blocksize) + return -EINVAL; + + if (end >= bmp->db_mapsize) + end = bmp->db_mapsize - 1; + /** * we trim all ag's within the range */ -- cgit v0.10.2 From d6ec6b60a56a1e7d99da1fc69c031fa5ab54ba94 Mon Sep 17 00:00:00 2001 From: Pritesh Raithatha Date: Wed, 17 Oct 2012 17:07:00 +0530 Subject: dt: Document: correct tegra20/30 pinctrl slew-rate name change nvidia,slew_rate* to nvidia,slew-rate* Cc: stable@kernel.org Signed-off-by: Pritesh Raithatha Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt index c8e5782..683fde9 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -93,7 +93,7 @@ Valid values for pin and group names are: With some exceptions, these support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength, - nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling. + nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling. drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2, drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg, diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt index c275b70..6f426ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt @@ -83,7 +83,7 @@ Valid values for pin and group names are: drive groups: These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all + nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode. ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1, -- cgit v0.10.2 From 154f3ebf53edcfbe28728452b4ab37a118581125 Mon Sep 17 00:00:00 2001 From: Pritesh Raithatha Date: Wed, 17 Oct 2012 17:09:36 +0530 Subject: pinctrl: tegra: set low power mode bank width to 2 Cc: stable@kernel.org Signed-off-by: Pritesh Raithatha Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index 729b686..7da0b37 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -464,7 +464,7 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bank = g->drv_bank; *reg = g->drv_reg; *bit = g->lpmd_bit; - *width = 1; + *width = 2; break; case TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH: *bank = g->drv_bank; -- cgit v0.10.2 From a03690e44468dcd3088f6600ab036d17bd2130ff Mon Sep 17 00:00:00 2001 From: Pritesh Raithatha Date: Wed, 17 Oct 2012 11:51:37 +0530 Subject: pinctrl: tegra: correct bank for pingroup and drv pingroup Cc: stable@kernel.org Signed-off-by: Pritesh Raithatha Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-tegra30.c b/drivers/pinctrl/pinctrl-tegra30.c index 0386fdf..7894f14 100644 --- a/drivers/pinctrl/pinctrl-tegra30.c +++ b/drivers/pinctrl/pinctrl-tegra30.c @@ -3345,10 +3345,10 @@ static const struct tegra_function tegra30_functions[] = { FUNCTION(vi_alt3), }; -#define MUXCTL_REG_A 0x3000 -#define PINGROUP_REG_A 0x868 +#define DRV_PINGROUP_REG_A 0x868 /* bank 0 */ +#define PINGROUP_REG_A 0x3000 /* bank 1 */ -#define PINGROUP_REG_Y(r) ((r) - MUXCTL_REG_A) +#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_A) #define PINGROUP_REG_N(r) -1 #define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior) \ @@ -3364,25 +3364,25 @@ static const struct tegra_function tegra30_functions[] = { }, \ .func_safe = TEGRA_MUX_ ## f_safe, \ .mux_reg = PINGROUP_REG_Y(r), \ - .mux_bank = 0, \ + .mux_bank = 1, \ .mux_bit = 0, \ .pupd_reg = PINGROUP_REG_Y(r), \ - .pupd_bank = 0, \ + .pupd_bank = 1, \ .pupd_bit = 2, \ .tri_reg = PINGROUP_REG_Y(r), \ - .tri_bank = 0, \ + .tri_bank = 1, \ .tri_bit = 4, \ .einput_reg = PINGROUP_REG_Y(r), \ - .einput_bank = 0, \ + .einput_bank = 1, \ .einput_bit = 5, \ .odrain_reg = PINGROUP_REG_##od(r), \ - .odrain_bank = 0, \ + .odrain_bank = 1, \ .odrain_bit = 6, \ .lock_reg = PINGROUP_REG_Y(r), \ - .lock_bank = 0, \ + .lock_bank = 1, \ .lock_bit = 7, \ .ioreset_reg = PINGROUP_REG_##ior(r), \ - .ioreset_bank = 0, \ + .ioreset_bank = 1, \ .ioreset_bit = 8, \ .drv_reg = -1, \ } @@ -3401,8 +3401,8 @@ static const struct tegra_function tegra30_functions[] = { .odrain_reg = -1, \ .lock_reg = -1, \ .ioreset_reg = -1, \ - .drv_reg = ((r) - PINGROUP_REG_A), \ - .drv_bank = 1, \ + .drv_reg = ((r) - DRV_PINGROUP_REG_A), \ + .drv_bank = 0, \ .hsm_bit = hsm_b, \ .schmitt_bit = schmitt_b, \ .lpmd_bit = lpmd_b, \ -- cgit v0.10.2 From 0a3af268644e0217ea22d6899a76187f930e9590 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 15 Oct 2012 17:16:23 -0300 Subject: drm/i915: Insert i915_preliminary_hw_support variable. On the worst scenario, users with new hardwares and old kernel from enabling times can get black screens. So, from now on, this perliminary_hw_support module parameter shall be used by all upcoming platforms that are still under enabling. The second option would be to merge the pci ids after basic modeset works, but that makes testing and development while bringing up hw a rather tedious afair. Although it is uncomfortable for developers use this extra variable it brings more stability for end users. Signed-off-by: Rodrigo Vivi Reviewed-by: Dave Airlie [danvet: dropped the i915_ param prefix, i915.i915_ is just tedious.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index a7837e5..1656475 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -119,6 +119,13 @@ module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600); MODULE_PARM_DESC(i915_enable_ppgtt, "Enable PPGTT (default: true)"); +unsigned int i915_preliminary_hw_support __read_mostly = 0; +module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600); +MODULE_PARM_DESC(preliminary_hw_support, + "Enable preliminary hardware support. " + "Enable Haswell and ValleyView Support. " + "(default: false)"); + static struct drm_driver driver; extern int intel_agp_enabled; @@ -827,6 +834,12 @@ i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct intel_device_info *intel_info = (struct intel_device_info *) ent->driver_data; + if (intel_info->is_haswell || intel_info->is_valleyview) + if(!i915_preliminary_hw_support) { + DRM_ERROR("Preliminary hardware support disabled\n"); + return -ENODEV; + } + /* Only bind to function 0 of the device. Early generations * used function 1 as a placeholder for multi-head. This causes * us confusion instead, especially on the systems where both diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b84f786..f511fa2 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1217,6 +1217,7 @@ extern int i915_enable_rc6 __read_mostly; extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; extern int i915_enable_ppgtt __read_mostly; +extern unsigned int i915_preliminary_hw_support __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); -- cgit v0.10.2 From 2456f44dd7a9aaffc2cd21a13f78198b3d94da08 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 16 Oct 2012 19:35:14 +0100 Subject: ARM: 7555/1: kexec: fix segment memory addresses check Commit c564df4db85aac8d1d65a56176a0a25f46138064 (ARM: 7540/1: kexec: Check segment memory addresses) added a safety check with accidentally reversed condition, and broke kexec functionality on ARM. Fix this. Acked-by: Will Deacon Signed-off-by: Aaro Koskinen Signed-off-by: Russell King diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c333..8ef8c93 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) -- cgit v0.10.2 From 3581fe0ef37ce12ac7a4f74831168352ae848edc Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 17 Oct 2012 12:01:34 +0100 Subject: ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the sample period of a running perf_event. Consequently, when calculating the next event period, the new period will only be considered after the previous one has overflowed. This patch changes the calculation of the remaining event ticks so that they are offset if the period has changed. Cc: Peter Zijlstra Reported-by: Andreas Sandberg Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1..53c0304 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); -- cgit v0.10.2 From c4a9fafc77a5318f5ed26c509bbcddf03e18c201 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:56:19 +0200 Subject: cfg80211: fix antenna gain handling No driver initializes chan->max_antenna_gain to something sensible, and the only place where it is being used right now is inside ath9k. This leads to ath9k potentially using less tx power than it can use, which can decrease performance/range in some rare cases. Rather than going through every single driver, this patch initializes chan->orig_mag in wiphy_register(), ignoring whatever value the driver left in there. If a driver for some reason wishes to limit it independent from regulatory rulesets, it can do so internally. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 443d4d7..3f72530 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -526,8 +526,7 @@ int wiphy_register(struct wiphy *wiphy) for (i = 0; i < sband->n_channels; i++) { sband->channels[i].orig_flags = sband->channels[i].flags; - sband->channels[i].orig_mag = - sband->channels[i].max_antenna_gain; + sband->channels[i].orig_mag = INT_MAX; sband->channels[i].orig_mpwr = sband->channels[i].max_power; sband->channels[i].band = band; -- cgit v0.10.2 From 279f0f55249820d8129470c0e104084b252f26f3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:56:20 +0200 Subject: cfg80211: fix initialization of chan->max_reg_power A few places touch chan->max_power based on updated tx power rules, but forget to do the same to chan->max_reg_power. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 3b8cbbc..bcc7d7e 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -908,7 +908,7 @@ static void handle_channel(struct wiphy *wiphy, map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = chan->orig_mag = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_power = chan->orig_mpwr = + chan->max_reg_power = chan->max_power = chan->orig_mpwr = (int) MBM_TO_DBM(power_rule->max_eirp); return; } @@ -1331,7 +1331,8 @@ static void handle_channel_custom(struct wiphy *wiphy, chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); + chan->max_reg_power = chan->max_power = + (int) MBM_TO_DBM(power_rule->max_eirp); } static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, -- cgit v0.10.2 From 4e860696e050375ae7fbb06984c19e2bf6a322e0 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 11 Oct 2012 09:54:56 +0200 Subject: s390/chpid: make headers usable (again) Add back a hunk from "4dcc2a4 s390/chsc: make headers usable" which was lost during the merge of the UAPI patch. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/uapi/asm/chpid.h b/arch/s390/include/uapi/asm/chpid.h index 581992d..6b4fb29 100644 --- a/arch/s390/include/uapi/asm/chpid.h +++ b/arch/s390/include/uapi/asm/chpid.h @@ -1,5 +1,5 @@ /* - * Copyright IBM Corp. 2007 + * Copyright IBM Corp. 2007, 2012 * Author(s): Peter Oberparleiter */ @@ -12,10 +12,10 @@ #define __MAX_CHPID 255 struct chp_id { - u8 reserved1; - u8 cssid; - u8 reserved2; - u8 id; + __u8 reserved1; + __u8 cssid; + __u8 reserved2; + __u8 id; } __attribute__((packed)); -- cgit v0.10.2 From aa92b33c6b93b5ef4ccbaa72afa9c387a96c2ee2 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 12 Oct 2012 10:22:25 +0200 Subject: s390/cio: use generic bitmap functions Use generic bitmap functions in the subchannel id bitmap to simplify and de-bloat the code. Signed-off-by: Sebastian Ott Acked-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index e6d5f8c..f0973a0 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -1,9 +1,10 @@ /* - * Copyright IBM Corp. 2007 + * Copyright IBM Corp. 2007, 2012 * Author(s): Peter Oberparleiter */ #include +#include #include #include "idset.h" #include "css.h" @@ -111,20 +112,13 @@ int idset_sch_get_first(struct idset *set, struct subchannel_id *schid) int idset_is_empty(struct idset *set) { - int bitnum; - - bitnum = find_first_bit(set->bitmap, set->num_ssid * set->num_id); - if (bitnum >= set->num_ssid * set->num_id) - return 1; - return 0; + return bitmap_empty(set->bitmap, set->num_ssid * set->num_id); } void idset_add_set(struct idset *to, struct idset *from) { - unsigned long i, len; + int len = min(__BITOPS_WORDS(to->num_ssid * to->num_id), + __BITOPS_WORDS(from->num_ssid * from->num_id)); - len = min(__BITOPS_WORDS(to->num_ssid * to->num_id), - __BITOPS_WORDS(from->num_ssid * from->num_id)); - for (i = 0; i < len ; i++) - to->bitmap[i] |= from->bitmap[i]; + bitmap_or(to->bitmap, to->bitmap, from->bitmap, len); } -- cgit v0.10.2 From cec8546638dc634824b629e33968d6c68f8b07d6 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 15 Oct 2012 12:24:56 +0200 Subject: s390/css: stop stsch loop after cc 3 Receiving cc=3 from store subchannel means 2 things: * the subchannel is not provided * there are no further subchannels in this subchannel set With this patch we abort the store subchannel loop after cc=3 (or an exception) and clear the subsequent bits in the subchannel id set. Reported-by: Cornelia Huck Signed-off-by: Sebastian Ott Acked-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index b4d572f..fd00afd 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -377,7 +377,11 @@ static int css_evaluate_new_subchannel(struct subchannel_id schid, int slow) /* Will be done on the slow path. */ return -EAGAIN; } - if (stsch_err(schid, &schib) || !css_sch_is_valid(&schib)) { + if (stsch_err(schid, &schib)) { + /* Subchannel is not provided. */ + return -ENXIO; + } + if (!css_sch_is_valid(&schib)) { /* Unusable - ignore. */ return 0; } @@ -536,6 +540,7 @@ static int slow_eval_unknown_fn(struct subchannel_id schid, void *data) case -ENOMEM: case -EIO: /* These should abort looping */ + idset_sch_del_subseq(slow_subchannel_set, schid); break; default: rc = 0; diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index f0973a0..199bc67 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -90,6 +90,14 @@ void idset_sch_del(struct idset *set, struct subchannel_id schid) idset_del(set, schid.ssid, schid.sch_no); } +/* Clear ids starting from @schid up to end of subchannel set. */ +void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid) +{ + int pos = schid.ssid * set->num_id + schid.sch_no; + + bitmap_clear(set->bitmap, pos, set->num_id - schid.sch_no); +} + int idset_sch_contains(struct idset *set, struct subchannel_id schid) { return idset_contains(set, schid.ssid, schid.sch_no); diff --git a/drivers/s390/cio/idset.h b/drivers/s390/cio/idset.h index 3d943f0..06d3bc0 100644 --- a/drivers/s390/cio/idset.h +++ b/drivers/s390/cio/idset.h @@ -1,5 +1,5 @@ /* - * Copyright IBM Corp. 2007 + * Copyright IBM Corp. 2007, 2012 * Author(s): Peter Oberparleiter */ @@ -17,6 +17,7 @@ void idset_fill(struct idset *set); struct idset *idset_sch_new(void); void idset_sch_add(struct idset *set, struct subchannel_id id); void idset_sch_del(struct idset *set, struct subchannel_id id); +void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid); int idset_sch_contains(struct idset *set, struct subchannel_id id); int idset_sch_get_first(struct idset *set, struct subchannel_id *id); int idset_is_empty(struct idset *set); -- cgit v0.10.2 From f47586b24c43adadd19c7e3f532a601d6eed728d Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 15 Oct 2012 14:31:29 +0200 Subject: perf_cpum_cf: Add support for counters available with IBM zEC12 Increase the maximum number of available counters and check if the hardware supports the counter. Support is indicated by the version of the CPU-measurement counter facility. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h index 7941968..5f0173a 100644 --- a/arch/s390/include/asm/perf_event.h +++ b/arch/s390/include/asm/perf_event.h @@ -9,7 +9,7 @@ #include /* CPU-measurement counter facility */ -#define PERF_CPUM_CF_MAX_CTR 160 +#define PERF_CPUM_CF_MAX_CTR 256 /* Per-CPU flags for PMU states */ #define PMU_F_RESERVED 0x1000 diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 9871b19..c4e7269 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -94,7 +94,7 @@ static int get_counter_set(u64 event) set = CPUMF_CTR_SET_USER; else if (event < 128) set = CPUMF_CTR_SET_CRYPTO; - else if (event < 160) + else if (event < 256) set = CPUMF_CTR_SET_EXT; return set; @@ -138,6 +138,10 @@ static int validate_ctr_version(const struct hw_perf_event *hwc) case CPUMF_CTR_SET_EXT: if (cpuhw->info.csvn < 1) err = -EOPNOTSUPP; + if ((cpuhw->info.csvn == 1 && hwc->config > 159) || + (cpuhw->info.csvn == 2 && hwc->config > 175) || + (cpuhw->info.csvn > 2 && hwc->config > 255)) + err = -EOPNOTSUPP; break; } -- cgit v0.10.2 From 9db8c050f6d16d925298f13f2b468342b37d4eee Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 15 Oct 2012 15:09:08 +0200 Subject: s390/kdump: Use 64 bit mode for 0x10000 entry point The 0x10000 entry point can be called in z/Arch architecture and 64 bit addressing mode. Therefore this patch removes the unnecessary 31 bit switch code from the kdump startup function. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/head_kdump.S b/arch/s390/kernel/head_kdump.S index acaaaf4..085a95e 100644 --- a/arch/s390/kernel/head_kdump.S +++ b/arch/s390/kernel/head_kdump.S @@ -85,16 +85,10 @@ .align 2 startup_kdump_relocated: basr %r13,0 -0: - mvc 0(8,%r0),.Lrestart_psw-0b(%r13) # Setup restart PSW - sam31 # Switch to 31 bit addr mode - sr %r1,%r1 # Erase register r1 - sr %r2,%r2 # Erase register r2 - sigp %r1,%r2,SIGP_SET_ARCHITECTURE # Switch to 31 bit arch mode - lpsw 0 # Start new kernel... +0: lpswe .Lrestart_psw-0b(%r13) # Start new kernel... .align 8 .Lrestart_psw: - .long 0x00080000,0x80000000 + startup + .quad 0x0000000080000000,0x0000000000000000 + startup #else .align 2 .Lep_startup_kdump: -- cgit v0.10.2 From 0f58aac9af2e93a23cd5f33fed0388e350cf58b9 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 17 Oct 2012 16:10:23 +0200 Subject: s390/thp: select HAVE_ARCH_TRANSPARENT_HUGEPAGE Add missing select statement to arch/s390/Kconfig. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 3f3d9ca..5dba755 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -130,6 +130,7 @@ config S390 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE select HAVE_UID16 if 32BIT select ARCH_WANT_IPC_PARSE_VERSION + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL_OLD select GENERIC_CLOCKEVENTS -- cgit v0.10.2 From c985cb37f1b39c2c8035af741a2a0b79f1fbaca7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 18 Oct 2012 11:11:01 +0200 Subject: s390: fix linker script for 31 bit builds Because of a change in the s390 arch backend of binutils (commit 23ecd77 "Pick the default arch depending on the target size" in binutils repo) 31 bit builds will fail since the linker would now try to create 64 bit binary output. Fix this by setting OUTPUT_ARCH to s390:31-bit instead of s390. Thanks to Andreas Krebbel for figuring out the issue. Fixes this build error: LD init/built-in.o s390x-4.7.2-ld: s390:31-bit architecture of input file `arch/s390/kernel/head.o' is incompatible with s390:64-bit output Cc: Andreas Krebbel Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/boot/compressed/vmlinux.lds.S b/arch/s390/boot/compressed/vmlinux.lds.S index d80f79d..8e1fb82 100644 --- a/arch/s390/boot/compressed/vmlinux.lds.S +++ b/arch/s390/boot/compressed/vmlinux.lds.S @@ -5,7 +5,7 @@ OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390") OUTPUT_ARCH(s390:64-bit) #else OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390") -OUTPUT_ARCH(s390) +OUTPUT_ARCH(s390:31-bit) #endif ENTRY(startup) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index de8fa9b..79cb51a 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -8,7 +8,7 @@ #ifndef CONFIG_64BIT OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390") -OUTPUT_ARCH(s390) +OUTPUT_ARCH(s390:31-bit) ENTRY(startup) jiffies = jiffies_64 + 4; #else -- cgit v0.10.2 From d18f99c28bab882f42949363658da5cf1d2f624f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 18 Oct 2012 13:13:41 +0200 Subject: s390/cache: fix data/instruction cache output The sysfs and procfs output of the instruction and data caches were wrong: the output of the data cache provided that instruction cache values and vice versa. Fix this by using the correct type indication when issueing the ecag instruction. Reported-by: Andreas Krebbel Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c index 8df8d8a1..64b2465 100644 --- a/arch/s390/kernel/cache.c +++ b/arch/s390/kernel/cache.c @@ -59,8 +59,8 @@ enum { enum { CACHE_TI_UNIFIED = 0, - CACHE_TI_INSTRUCTION = 0, - CACHE_TI_DATA, + CACHE_TI_DATA = 0, + CACHE_TI_INSTRUCTION, }; struct cache_info { @@ -121,7 +121,10 @@ static int __init cache_add(int level, int private, int type) cache = kzalloc(sizeof(*cache), GFP_KERNEL); if (!cache) return -ENOMEM; - ti = type == CACHE_TYPE_DATA ? CACHE_TI_DATA : CACHE_TI_UNIFIED; + if (type == CACHE_TYPE_INSTRUCTION) + ti = CACHE_TI_INSTRUCTION; + else + ti = CACHE_TI_UNIFIED; cache->size = ecag(EXTRACT_SIZE, level, ti); cache->line_size = ecag(EXTRACT_LINE_SIZE, level, ti); cache->associativity = ecag(EXTRACT_ASSOCIATIVITY, level, ti); -- cgit v0.10.2 From 7f112af40fecf5399b61e69ffc6b55a9d82789f7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Oct 2012 14:53:04 +0200 Subject: batman-adv: Fix broadcast packet CRC calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far the crc16 checksum for a batman-adv broadcast data packet, received on a batman-adv hard interface, was calculated over zero bytes of its content leading to many incoming broadcast data packets wrongly being dropped (60-80% packet loss). This patch fixes this issue by calculating the crc16 over the actual, complete broadcast payload. The issue is a regression introduced by ("batman-adv: add broadcast duplicate check"). Signed-off-by: Linus Lüssing Acked-by: Simon Wunderlich Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 0a9084a..eebab20 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1210,8 +1210,8 @@ int batadv_bla_init(struct batadv_priv *bat_priv) /** * batadv_bla_check_bcast_duplist * @bat_priv: the bat priv with all the soft interface information - * @bcast_packet: originator mac address - * @hdr_size: maximum length of the frame + * @bcast_packet: encapsulated broadcast frame plus batman header + * @bcast_packet_len: length of encapsulated broadcast frame plus batman header * * check if it is on our broadcast list. Another gateway might * have sent the same packet because it is connected to the same backbone, @@ -1224,14 +1224,14 @@ int batadv_bla_init(struct batadv_priv *bat_priv) */ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, struct batadv_bcast_packet *bcast_packet, - int hdr_size) + int bcast_packet_len) { int i, length, curr; uint8_t *content; uint16_t crc; struct batadv_bcast_duplist_entry *entry; - length = hdr_size - sizeof(*bcast_packet); + length = bcast_packet_len - sizeof(*bcast_packet); content = (uint8_t *)bcast_packet; content += sizeof(*bcast_packet); diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 939fc01..376b4cc 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -1124,8 +1124,14 @@ int batadv_recv_bcast_packet(struct sk_buff *skb, spin_unlock_bh(&orig_node->bcast_seqno_lock); + /* keep skb linear for crc calculation */ + if (skb_linearize(skb) < 0) + goto out; + + bcast_packet = (struct batadv_bcast_packet *)skb->data; + /* check whether this has been sent by another originator before */ - if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, hdr_size)) + if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, skb->len)) goto out; /* rebroadcast packet */ -- cgit v0.10.2 From 7dac7b76b8db87fc79857a53a09730fb2148579b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Wed, 17 Oct 2012 14:53:05 +0200 Subject: batman-adv: Fix potential broadcast BLA-duplicate-check race condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Threads in the bottom half of batadv_bla_check_bcast_duplist() might otherwise for instance overwrite variables which other threads might be using/reading at the same time in the top half, potentially leading to messing up the bcast_duplist, possibly resulting in false bridge loop avoidance duplicate check decisions. Signed-off-by: Linus Lüssing Acked-by: Simon Wunderlich Signed-off-by: Marek Lindner diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index eebab20..fd8d5af 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1167,6 +1167,8 @@ int batadv_bla_init(struct batadv_priv *bat_priv) uint16_t crc; unsigned long entrytime; + spin_lock_init(&bat_priv->bla.bcast_duplist_lock); + batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla hash registering\n"); /* setting claim destination address */ @@ -1226,7 +1228,7 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, struct batadv_bcast_packet *bcast_packet, int bcast_packet_len) { - int i, length, curr; + int i, length, curr, ret = 0; uint8_t *content; uint16_t crc; struct batadv_bcast_duplist_entry *entry; @@ -1238,6 +1240,8 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, /* calculate the crc ... */ crc = crc16(0, content, length); + spin_lock_bh(&bat_priv->bla.bcast_duplist_lock); + for (i = 0; i < BATADV_DUPLIST_SIZE; i++) { curr = (bat_priv->bla.bcast_duplist_curr + i); curr %= BATADV_DUPLIST_SIZE; @@ -1259,9 +1263,12 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, /* this entry seems to match: same crc, not too old, * and from another gw. therefore return 1 to forbid it. */ - return 1; + ret = 1; + goto out; } - /* not found, add a new entry (overwrite the oldest entry) */ + /* not found, add a new entry (overwrite the oldest entry) + * and allow it, its the first occurence. + */ curr = (bat_priv->bla.bcast_duplist_curr + BATADV_DUPLIST_SIZE - 1); curr %= BATADV_DUPLIST_SIZE; entry = &bat_priv->bla.bcast_duplist[curr]; @@ -1270,8 +1277,10 @@ int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv, memcpy(entry->orig, bcast_packet->orig, ETH_ALEN); bat_priv->bla.bcast_duplist_curr = curr; - /* allow it, its the first occurence. */ - return 0; +out: + spin_unlock_bh(&bat_priv->bla.bcast_duplist_lock); + + return ret; } diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 2ed82ca..ac1e07a 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -205,6 +205,8 @@ struct batadv_priv_bla { struct batadv_hashtable *backbone_hash; struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE]; int bcast_duplist_curr; + /* protects bcast_duplist and bcast_duplist_curr */ + spinlock_t bcast_duplist_lock; struct batadv_bla_claim_dst claim_dest; struct delayed_work work; }; -- cgit v0.10.2 From 8a095030f7551d07860fd54890d1bcdc77630c29 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Wed, 17 Oct 2012 03:23:55 +0000 Subject: IB/mlx4: Fix build error on platforms where UL is not 64 bits Line 110 uses UL as a compiler cast for the 0x constant, but it's not large enough to hold a 64-bit value on a 32-bit arch. Signed-off-by: Doug Ledford [ Use "-1" instead of "FFFFFFFFFFFFFFFFULL". - Roland ] Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/alias_GUID.c b/drivers/infiniband/hw/mlx4/alias_GUID.c index d2fb38d..2f215b9 100644 --- a/drivers/infiniband/hw/mlx4/alias_GUID.c +++ b/drivers/infiniband/hw/mlx4/alias_GUID.c @@ -107,7 +107,7 @@ static __be64 get_cached_alias_guid(struct mlx4_ib_dev *dev, int port, int index { if (index >= NUM_ALIAS_GUID_PER_PORT) { pr_err("%s: ERROR: asked for index:%d\n", __func__, index); - return (__force __be64) ((u64) 0xFFFFFFFFFFFFFFFFUL); + return (__force __be64) -1; } return *(__be64 *)&dev->sriov.demux[port - 1].guid_cache[index]; } -- cgit v0.10.2 From 2c75d2ccb6e5ffb96ce8624ef4c1f7ba5bd96499 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 17 Oct 2012 16:42:58 +0000 Subject: IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF) In the MAD paravirtualization code, one of the checks performed when forwarding QP1 (GSI) packets from wire to slave was a P_Key check: the P_Key received in the MAD must be present in the guest's paravirtualized P_Key table, and at least one of the (packet P_Key, guest P_Key) must be a full-membership P_Key. However, if everyone involved has only limited membership in the default P_Key, then packets sent by full-member remote hosts arrive at the PPF but are not passed on to the VFs with the current P_Key1 check. Fix this as follows: 1. Don't care if P_Key received over wire is full or not. If it successfully passed HW checks on the real QP1, then simply pass it to guest regardless of whether the guest has full or limited membership in its P_Key table. 2. If the guest (including paravirtualized master) has both full and limited P_Key forms in its table, preferentially pass the paravirtualized P_Key index of the full P_Key form in the tunnel header. 3. In the multicast join flow (mlx4/mcg.c), use the index for the default P_Key (wherever it is located) in replies generated from within the mcg module (previously, P_Key index 0 was used in all cases). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index 21a7941..0a903c1 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -409,38 +409,45 @@ int mlx4_ib_find_real_gid(struct ib_device *ibdev, u8 port, __be64 guid) } -static int get_pkey_phys_indices(struct mlx4_ib_dev *ibdev, u8 port, u8 ph_pkey_ix, - u8 *full_pk_ix, u8 *partial_pk_ix, - int *is_full_member) +static int find_slave_port_pkey_ix(struct mlx4_ib_dev *dev, int slave, + u8 port, u16 pkey, u16 *ix) { - u16 search_pkey; - int fm; - int err = 0; - u16 pk; + int i, ret; + u8 unassigned_pkey_ix, pkey_ix, partial_ix = 0xFF; + u16 slot_pkey; - err = ib_get_cached_pkey(&ibdev->ib_dev, port, ph_pkey_ix, &search_pkey); - if (err) - return err; + if (slave == mlx4_master_func_num(dev->dev)) + return ib_find_cached_pkey(&dev->ib_dev, port, pkey, ix); - fm = (search_pkey & 0x8000) ? 1 : 0; - if (fm) { - *full_pk_ix = ph_pkey_ix; - search_pkey &= 0x7FFF; - } else { - *partial_pk_ix = ph_pkey_ix; - search_pkey |= 0x8000; - } + unassigned_pkey_ix = dev->dev->phys_caps.pkey_phys_table_len[port] - 1; - if (ib_find_exact_cached_pkey(&ibdev->ib_dev, port, search_pkey, &pk)) - pk = 0xFFFF; + for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) { + if (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == unassigned_pkey_ix) + continue; - if (fm) - *partial_pk_ix = (pk & 0xFF); - else - *full_pk_ix = (pk & 0xFF); + pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][i]; - *is_full_member = fm; - return err; + ret = ib_get_cached_pkey(&dev->ib_dev, port, pkey_ix, &slot_pkey); + if (ret) + continue; + if ((slot_pkey & 0x7FFF) == (pkey & 0x7FFF)) { + if (slot_pkey & 0x8000) { + *ix = (u16) pkey_ix; + return 0; + } else { + /* take first partial pkey index found */ + if (partial_ix == 0xFF) + partial_ix = pkey_ix; + } + } + } + + if (partial_ix < 0xFF) { + *ix = (u16) partial_ix; + return 0; + } + + return -EINVAL; } int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, @@ -458,10 +465,8 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, unsigned tun_tx_ix = 0; int dqpn; int ret = 0; - int i; - int is_full_member = 0; u16 tun_pkey_ix; - u8 ph_pkey_ix, full_pk_ix = 0, partial_pk_ix = 0; + u16 cached_pkey; if (dest_qpt > IB_QPT_GSI) return -EINVAL; @@ -481,27 +486,17 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port, else tun_qp = &tun_ctx->qp[1]; - /* compute pkey index for slave */ - /* get physical pkey -- virtualized Dom0 pkey to phys*/ + /* compute P_Key index to put in tunnel header for slave */ if (dest_qpt) { - ph_pkey_ix = - dev->pkeys.virt2phys_pkey[mlx4_master_func_num(dev->dev)][port - 1][wc->pkey_index]; - - /* now, translate this to the slave pkey index */ - ret = get_pkey_phys_indices(dev, port, ph_pkey_ix, &full_pk_ix, - &partial_pk_ix, &is_full_member); + u16 pkey_ix; + ret = ib_get_cached_pkey(&dev->ib_dev, port, wc->pkey_index, &cached_pkey); if (ret) return -EINVAL; - for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) { - if ((dev->pkeys.virt2phys_pkey[slave][port - 1][i] == full_pk_ix) || - (is_full_member && - (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == partial_pk_ix))) - break; - } - if (i == dev->dev->caps.pkey_table_len[port]) + ret = find_slave_port_pkey_ix(dev, slave, port, cached_pkey, &pkey_ix); + if (ret) return -EINVAL; - tun_pkey_ix = i; + tun_pkey_ix = pkey_ix; } else tun_pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][0]; diff --git a/drivers/infiniband/hw/mlx4/mcg.c b/drivers/infiniband/hw/mlx4/mcg.c index 3c3b54c..44ff480 100644 --- a/drivers/infiniband/hw/mlx4/mcg.c +++ b/drivers/infiniband/hw/mlx4/mcg.c @@ -233,7 +233,8 @@ static int send_mad_to_slave(int slave, struct mlx4_ib_demux_ctx *ctx, ib_query_ah(dev->sm_ah[ctx->port - 1], &ah_attr); - wc.pkey_index = 0; + if (ib_find_cached_pkey(&dev->ib_dev, ctx->port, IB_DEFAULT_PKEY_FULL, &wc.pkey_index)) + return -EINVAL; wc.sl = 0; wc.dlid_path_bits = 0; wc.port_num = ctx->port; -- cgit v0.10.2 From bef83ed92caca45a394344a14b0234aea977da6e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 17 Oct 2012 16:42:59 +0000 Subject: IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization A client re-register event invokes cleanup of all MCGs. This is required to protect against misbehaved guests leading to corruption of join/leave database. However, since cleaning up the MCGs is a heavy operation, it is pushed to a work queue for further processing. Client re-register is also propagated to ULPs (e.g IPoIB). However, since the cleanup is performed in a workqueue, the ULP could leave and re-join groups before the cleanup occurs. In this case, when the cleanup takes place, it prunes the (newly-joined) MCGs and the ULP is left without actual MCGs while believing it joined them. Fix this by setting the flushing flag before invoking the cleanup task and clearing it after flushing is complete. Signed-off-by: Eli Cohen Reviewed-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/mcg.c b/drivers/infiniband/hw/mlx4/mcg.c index 44ff480..25b2cdf 100644 --- a/drivers/infiniband/hw/mlx4/mcg.c +++ b/drivers/infiniband/hw/mlx4/mcg.c @@ -1075,10 +1075,6 @@ static void _mlx4_ib_mcg_port_cleanup(struct mlx4_ib_demux_ctx *ctx, int destroy unsigned long end; int count; - if (ctx->flushing) - return; - - ctx->flushing = 1; for (i = 0; i < MAX_VFS; ++i) clean_vf_mcast(ctx, i); @@ -1108,9 +1104,6 @@ static void _mlx4_ib_mcg_port_cleanup(struct mlx4_ib_demux_ctx *ctx, int destroy force_clean_group(group); } mutex_unlock(&ctx->mcg_table_lock); - - if (!destroy_wq) - ctx->flushing = 0; } struct clean_work { @@ -1124,6 +1117,7 @@ static void mcg_clean_task(struct work_struct *work) struct clean_work *cw = container_of(work, struct clean_work, work); _mlx4_ib_mcg_port_cleanup(cw->ctx, cw->destroy_wq); + cw->ctx->flushing = 0; kfree(cw); } @@ -1131,13 +1125,20 @@ void mlx4_ib_mcg_port_cleanup(struct mlx4_ib_demux_ctx *ctx, int destroy_wq) { struct clean_work *work; + if (ctx->flushing) + return; + + ctx->flushing = 1; + if (destroy_wq) { _mlx4_ib_mcg_port_cleanup(ctx, destroy_wq); + ctx->flushing = 0; return; } work = kmalloc(sizeof *work, GFP_KERNEL); if (!work) { + ctx->flushing = 0; mcg_warn("failed allocating work for cleanup\n"); return; } -- cgit v0.10.2 From 7ae9d71e8df27a3ab60a05ae3add08728debc09c Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 18 Oct 2012 17:07:01 +0800 Subject: pinctrl: remove mutex lock in groups show Mutex is locked duplicatly by pinconf_groups_show() and pin_config_group_get(). It results dead lock. So avoid to lock mutex in pinconf_groups_show(). Cc: stable@kernel.org Signed-off-by: Haojian Zhuang Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 43f474c..baee2cc 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -537,8 +537,6 @@ static int pinconf_groups_show(struct seq_file *s, void *what) seq_puts(s, "Pin config settings per pin group\n"); seq_puts(s, "Format: group (name): configs\n"); - mutex_lock(&pinctrl_mutex); - while (selector < ngroups) { const char *gname = pctlops->get_group_name(pctldev, selector); @@ -549,8 +547,6 @@ static int pinconf_groups_show(struct seq_file *s, void *what) selector++; } - mutex_unlock(&pinctrl_mutex); - return 0; } -- cgit v0.10.2 From af1b85e49089f945deb46258b0fc4bc9910afb22 Mon Sep 17 00:00:00 2001 From: Jay Purohit Date: Sun, 14 Oct 2012 07:07:21 +0000 Subject: usb/ipheth: Add iPhone 5 support I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit Acked-by: Valdis Kletnieks Signed-off-by: Jan Ceuleers Signed-off-by: David S. Miller diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index a28a983..534d8be 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -62,6 +62,7 @@ #define USB_PRODUCT_IPAD 0x129a #define USB_PRODUCT_IPHONE_4_VZW 0x129c #define USB_PRODUCT_IPHONE_4S 0x12a0 +#define USB_PRODUCT_IPHONE_5 0x12a8 #define IPHETH_USBINTF_CLASS 255 #define IPHETH_USBINTF_SUBCLASS 253 @@ -113,6 +114,10 @@ static struct usb_device_id ipheth_table[] = { USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, { } }; MODULE_DEVICE_TABLE(usb, ipheth_table); -- cgit v0.10.2 From 0ca7111a38f053ae7b8829ee32fca6f9ef47550a Mon Sep 17 00:00:00 2001 From: Matus Ujhelyi Date: Sun, 14 Oct 2012 19:07:16 +0000 Subject: phy: add AT803x driver This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi Signed-off-by: David S. Miller diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 983bbf4..961f0b2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -15,6 +15,11 @@ if PHYLIB comment "MII PHY device drivers" +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model + config AMD_PHY tristate "Drivers for the AMD PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 426674d..9645e38 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o +obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c new file mode 100644 index 0000000..45cbc10 --- /dev/null +++ b/drivers/net/phy/at803x.c @@ -0,0 +1,176 @@ +/* + * drivers/net/phy/at803x.c + * + * Driver for Atheros 803x PHY + * + * Author: Matus Ujhelyi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#define AT803X_INTR_ENABLE 0x12 +#define AT803X_INTR_STATUS 0x13 +#define AT803X_WOL_ENABLE 0x01 +#define AT803X_DEVICE_ADDR 0x03 +#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C +#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B +#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A +#define AT803X_MMD_ACCESS_CONTROL 0x0D +#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E +#define AT803X_FUNC_DATA 0x4003 + +MODULE_DESCRIPTION("Atheros 803x PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_LICENSE("GPL"); + +static void at803x_set_wol_mac_addr(struct phy_device *phydev) +{ + struct net_device *ndev = phydev->attached_dev; + const u8 *mac; + unsigned int i, offsets[] = { + AT803X_LOC_MAC_ADDR_32_47_OFFSET, + AT803X_LOC_MAC_ADDR_16_31_OFFSET, + AT803X_LOC_MAC_ADDR_0_15_OFFSET, + }; + + if (!ndev) + return; + + mac = (const u8 *) ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return; + + for (i = 0; i < 3; i++) { + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_DEVICE_ADDR); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + offsets[i]); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, + AT803X_FUNC_DATA); + phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, + mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); + } +} + +static int at803x_config_init(struct phy_device *phydev) +{ + int val; + u32 features; + int status; + + features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | + SUPPORTED_FIBRE | SUPPORTED_BNC; + + val = phy_read(phydev, MII_BMSR); + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + /* enable WOL */ + at803x_set_wol_mac_addr(phydev); + status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE); + status = phy_read(phydev, AT803X_INTR_STATUS); + + return 0; +} + +/* ATHEROS 8035 */ +static struct phy_driver at8035_driver = { + .phy_id = 0x004dd072, + .name = "Atheros 8035 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +/* ATHEROS 8030 */ +static struct phy_driver at8030_driver = { + .phy_id = 0x004dd076, + .name = "Atheros 8030 ethernet", + .phy_id_mask = 0xffffffef, + .config_init = at803x_config_init, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .driver = { + .owner = THIS_MODULE, + }, +}; + +static int __init atheros_init(void) +{ + int ret; + + ret = phy_driver_register(&at8035_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&at8030_driver); + if (ret) + goto err2; + + return 0; + +err2: + phy_driver_unregister(&at8035_driver); +err1: + return ret; +} + +static void __exit atheros_exit(void) +{ + phy_driver_unregister(&at8035_driver); + phy_driver_unregister(&at8030_driver); +} + +module_init(atheros_init); +module_exit(atheros_exit); + +static struct mdio_device_id __maybe_unused atheros_tbl[] = { + { 0x004dd076, 0xffffffef }, + { 0x004dd072, 0xffffffef }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, atheros_tbl); -- cgit v0.10.2 From 18c22a03a2187bcbda7d3a7fa1061584a6348e7b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 17 Oct 2012 01:37:36 +0000 Subject: vlan: allow to change type when no vlan device is hooked on netdev vlan_info might be present but still no vlan devices might be there. That is in case of vlan0 automatically added. So in that case, allow to change netdev type. Reported-by: Jon Stanley Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 9096bcb..ee07072 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -463,7 +463,9 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event, case NETDEV_PRE_TYPE_CHANGE: /* Forbid underlaying device to change its type. */ - return NOTIFY_BAD; + if (vlan_uses_dev(dev)) + return NOTIFY_BAD; + break; case NETDEV_NOTIFY_PEERS: case NETDEV_BONDING_FAILOVER: -- cgit v0.10.2 From 13d82bf50dce632355fcccafa4fe44a9b5e706d8 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 17 Oct 2012 21:17:44 +0000 Subject: ipv4: Fix flushing of cached routing informations Currently we can not flush cached pmtu/redirect informations via the ipv4_sysctl_rtcache_flush sysctl. We need to check the rt_genid of the old route and reset the nh exeption if the old route is expired when we bind a new route to a nh exeption. Signed-off-by: Steffen Klassert Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 432f4bb..a8c65121 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1163,8 +1163,12 @@ static bool rt_bind_exception(struct rtable *rt, struct fib_nh_exception *fnhe, spin_lock_bh(&fnhe_lock); if (daddr == fnhe->fnhe_daddr) { - struct rtable *orig; - + struct rtable *orig = rcu_dereference(fnhe->fnhe_rth); + if (orig && rt_is_expired(orig)) { + fnhe->fnhe_gw = 0; + fnhe->fnhe_pmtu = 0; + fnhe->fnhe_expires = 0; + } if (fnhe->fnhe_pmtu) { unsigned long expires = fnhe->fnhe_expires; unsigned long diff = expires - jiffies; @@ -1181,7 +1185,6 @@ static bool rt_bind_exception(struct rtable *rt, struct fib_nh_exception *fnhe, } else if (!rt->rt_gateway) rt->rt_gateway = daddr; - orig = rcu_dereference(fnhe->fnhe_rth); rcu_assign_pointer(fnhe->fnhe_rth, rt); if (orig) rt_free(orig); -- cgit v0.10.2 From 6d772ac5578f711d1ce7b03535d1c95bffb21dff Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 18 Oct 2012 03:21:55 +0000 Subject: netlink: use kfree_rcu() in netlink_release() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On some suspend/resume operations involving wimax device, we have noticed some intermittent memory corruptions in netlink code. Stéphane Marchesin tracked this corruption in netlink_update_listeners() and suggested a patch. It appears netlink_release() should use kfree_rcu() instead of kfree() for the listeners structure as it may be used by other cpus using RCU protection. netlink_release() must set to NULL the listeners pointer when it is about to be freed. Also have to protect netlink_update_listeners() and netlink_has_listeners() if listeners is NULL. Add a nl_deref_protected() lockdep helper to properly document which locks protects us. Reported-by: Jonathan Kliegman Signed-off-by: Eric Dumazet Cc: Stéphane Marchesin Cc: Sam Leffler Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 01e944a..4da797f 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -138,6 +138,8 @@ static int netlink_dump(struct sock *sk); static DEFINE_RWLOCK(nl_table_lock); static atomic_t nl_table_users = ATOMIC_INIT(0); +#define nl_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&nl_table_lock)); + static ATOMIC_NOTIFIER_HEAD(netlink_chain); static inline u32 netlink_group_mask(u32 group) @@ -345,6 +347,11 @@ netlink_update_listeners(struct sock *sk) struct hlist_node *node; unsigned long mask; unsigned int i; + struct listeners *listeners; + + listeners = nl_deref_protected(tbl->listeners); + if (!listeners) + return; for (i = 0; i < NLGRPLONGS(tbl->groups); i++) { mask = 0; @@ -352,7 +359,7 @@ netlink_update_listeners(struct sock *sk) if (i < NLGRPLONGS(nlk_sk(sk)->ngroups)) mask |= nlk_sk(sk)->groups[i]; } - tbl->listeners->masks[i] = mask; + listeners->masks[i] = mask; } /* this function is only called with the netlink table "grabbed", which * makes sure updates are visible before bind or setsockopt return. */ @@ -536,7 +543,11 @@ static int netlink_release(struct socket *sock) if (netlink_is_kernel(sk)) { BUG_ON(nl_table[sk->sk_protocol].registered == 0); if (--nl_table[sk->sk_protocol].registered == 0) { - kfree(nl_table[sk->sk_protocol].listeners); + struct listeners *old; + + old = nl_deref_protected(nl_table[sk->sk_protocol].listeners); + RCU_INIT_POINTER(nl_table[sk->sk_protocol].listeners, NULL); + kfree_rcu(old, rcu); nl_table[sk->sk_protocol].module = NULL; nl_table[sk->sk_protocol].bind = NULL; nl_table[sk->sk_protocol].flags = 0; @@ -982,7 +993,7 @@ int netlink_has_listeners(struct sock *sk, unsigned int group) rcu_read_lock(); listeners = rcu_dereference(nl_table[sk->sk_protocol].listeners); - if (group - 1 < nl_table[sk->sk_protocol].groups) + if (listeners && group - 1 < nl_table[sk->sk_protocol].groups) res = test_bit(group - 1, listeners->masks); rcu_read_unlock(); @@ -1625,7 +1636,7 @@ int __netlink_change_ngroups(struct sock *sk, unsigned int groups) new = kzalloc(sizeof(*new) + NLGRPSZ(groups), GFP_ATOMIC); if (!new) return -ENOMEM; - old = rcu_dereference_protected(tbl->listeners, 1); + old = nl_deref_protected(tbl->listeners); memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups)); rcu_assign_pointer(tbl->listeners, new); -- cgit v0.10.2 From c6846ee148e07e4cfae4de486532efb02d238938 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 18 Oct 2012 05:11:29 +0000 Subject: net: qmi_wwan: adding more ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 6883c37..9d23ba2 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -371,16 +371,57 @@ static const struct usb_device_id products[] = { }, /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0021, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0025, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0031, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0042, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0049, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0052, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0058, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0113, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0118, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0121, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0123, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0124, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0125, 6)}, + {QMI_FIXED_INTF(0x19d2, 0x0126, 5)}, + {QMI_FIXED_INTF(0x19d2, 0x0130, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0133, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0141, 5)}, {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ + {QMI_FIXED_INTF(0x19d2, 0x0158, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ + {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ + {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, + {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1012, 4)}, {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1021, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1245, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1247, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1252, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1254, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, + {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ -- cgit v0.10.2 From a3374c42aa5f7237e87ff3b0622018636b0c847e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 18 Oct 2012 09:14:12 +0000 Subject: tcp: fix FIONREAD/SIOCINQ tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by: Elliot Hughes Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Tom Herbert Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index f32c02e..b7c2f43 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -549,14 +549,12 @@ int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg) !tp->urg_data || before(tp->urg_seq, tp->copied_seq) || !before(tp->urg_seq, tp->rcv_nxt)) { - struct sk_buff *skb; answ = tp->rcv_nxt - tp->copied_seq; - /* Subtract 1, if FIN is in queue. */ - skb = skb_peek_tail(&sk->sk_receive_queue); - if (answ && skb) - answ -= tcp_hdr(skb)->fin; + /* Subtract 1, if FIN was received */ + if (answ && sock_flag(sk, SOCK_DONE)) + answ--; } else answ = tp->urg_seq - tp->copied_seq; release_sock(sk); -- cgit v0.10.2 From 7e3cdf242f6dfa8d66dac8e1a5167f3e3101d213 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 18 Oct 2012 17:58:12 +0100 Subject: UAPI: Make arch/ia64/include/asm/kvm_para.h generic Make arch/ia64/include/asm/kvm_para.h generic since it's the same as the asm-generic version. This deals with the problem when ia64 is compiled with allmodconfig you get: In file included from include/uapi/linux/kvm_para.h:26:0, from include/linux/kvm_para.h:4, from kernel/watchdog.c:28: arch/ia64/include/asm/kvm_para.h:24:28: error: redefinition of 'kvm_arch_para_features' include/asm-generic/kvm_para.h:16:28: note: previous definition of 'kvm_arch_para_features' was here arch/ia64/include/asm/kvm_para.h:29:20: error: redefinition of 'kvm_check_and_clear_guest_paused' include/asm-generic/kvm_para.h:11:20: note: previous definition of 'kvm_check_and_clear_guest_paused' was here This does not happen for ia64 defconfig. Reported-by: Yuanhan Liu Signed-off-by: David Howells cc: Yuanhan Liu cc: fengguang.wu@intel.com Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild index 4a159da..dd02f09 100644 --- a/arch/ia64/include/asm/Kbuild +++ b/arch/ia64/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += clkdev.h generic-y += exec.h +generic-y += kvm_para.h diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h deleted file mode 100644 index 47c00f9..0000000 --- a/arch/ia64/include/asm/kvm_para.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2007 Xiantao Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#ifndef __IA64_KVM_PARA_H -#define __IA64_KVM_PARA_H - -#include - - -static inline unsigned int kvm_arch_para_features(void) -{ - return 0; -} - -static inline bool kvm_check_and_clear_guest_paused(void) -{ - return false; -} - -#endif -- cgit v0.10.2 From ed7d132a634e7e4c3fa657363df5df39e7f768e4 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 14 Oct 2012 23:35:24 -0700 Subject: ARM: shmobile: r8a7779: I/O address abuse cleanup a2a47ca36642e3995e982957bc42678cf11ca6ac (ARM: __io abuse cleanup) cleanuped __io() -> IOMEM(), but setup-r8a7779.c was out of target, since it directly used (void __iomem __force *) instead of __io(). This patch cleanup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668..ebbffc2 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); -- cgit v0.10.2 From fd2c32a95b10f49d3099188d4d825d9a91e9fe05 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Oct 2012 10:11:36 +0200 Subject: s390,uapi: do not use uapi/asm-generic/kvm_para.h It turns out that S390 shouldn't use uapi/asm-generic/kvm_para.h since it defines the functions in its non-UAPI kvm_para.h file. #including will first pick up include/asm-generic/kvm_para.h, which defines conflicting functions. Instead, partially revert commit 0420c87e648a3b623ad925038a0bcff2ef5a4bc9, ungenericising this file and just inserting a comment to prevent the patch program from deleting it. cc: Yuanhan Liu cc: fengguang.wu@intel.com Reported-by: Yuanhan Liu Signed-off-by: David Howells Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild index 59b67ed..7bf68ff 100644 --- a/arch/s390/include/uapi/asm/Kbuild +++ b/arch/s390/include/uapi/asm/Kbuild @@ -1,8 +1,6 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -generic-y += kvm_para.h - header-y += auxvec.h header-y += bitsperlong.h header-y += byteorder.h diff --git a/arch/s390/include/uapi/asm/kvm_para.h b/arch/s390/include/uapi/asm/kvm_para.h new file mode 100644 index 0000000..ff1f4e7 --- /dev/null +++ b/arch/s390/include/uapi/asm/kvm_para.h @@ -0,0 +1,11 @@ +/* + * User API definitions for paravirtual devices on s390 + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Christian Borntraeger + */ -- cgit v0.10.2 From 9dbf8ccde1b810a59b684e1d1aec7f9d2d007162 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: iio: Add some helper macros for unit conversion Some datasheets use a different unit to specify the channel scale than what IIO expects it to be. This patch adds two helper macros which allow to convert units commonly used in datasheets to IIO units: * acceleration: g -> meter / second**2 * angular velocity: degree (/ second) -> rad (/ second) This makes it much more convenient to specify and also easier to verify a channel's scale attribute. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index c0ae76a..7806c24 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -618,4 +618,20 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) }; #endif +/** + * IIO_DEGREE_TO_RAD() - Convert degree to rad + * @deg: A value in degree + * + * Returns the given value converted from degree to rad + */ +#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL) + +/** + * IIO_G_TO_M_S_2() - Convert g to meter / second**2 + * @g: A value in g + * + * Returns the given value converted from g to meter / second**2 + */ +#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL) + #endif /* _INDUSTRIAL_IO_H_ */ -- cgit v0.10.2 From 8735cf94afc1a63526417762c288501fc239c12d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16201 channel offsets and scales Most of the channel offsets and scales in the adis16201 are incorrect: * Temperature scale is off by a factor of 1000 * Voltage scale is off by a factor of 1000 * Acceleration scale is in g instead of m/(s**2) * Temperature offset is completely wrong This patch fixes these issues. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c index 8e37d6e..b12ca68 100644 --- a/drivers/staging/iio/accel/adis16201_core.c +++ b/drivers/staging/iio/accel/adis16201_core.c @@ -310,30 +310,32 @@ static int adis16201_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: - *val = 0; - if (chan->channel == 0) - *val2 = 1220; - else - *val2 = 610; + if (chan->channel == 0) { + *val = 1; + *val2 = 220000; /* 1.22 mV */ + } else { + *val = 0; + *val2 = 610000; /* 0.610 mV */ + } return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = -470000; + *val = -470; /* 0.47 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = 0; - *val2 = 462500; - return IIO_VAL_INT_PLUS_MICRO; + *val2 = IIO_G_TO_M_S_2(462400); /* 0.4624 mg */ + return IIO_VAL_INT_PLUS_NANO; case IIO_INCLI: *val = 0; - *val2 = 100000; + *val2 = 100000; /* 0.1 degree */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } break; case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 25000 / -470 - 1278; /* 25 C = 1278 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: switch (chan->type) { -- cgit v0.10.2 From 10dda40fb605c6468045906b0bce08e2e12c0aca Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16203 channel offsets and scales Most of the channel offsets and scales in the adis16203 are incorrect: * Temperature scale is off by a factor of 1000 * Voltage scale is off by a factor of 1000 * Temperature offset is completely wrong This patch fixes these issues. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c index 002fa9d..e7b3441 100644 --- a/drivers/staging/iio/accel/adis16203_core.c +++ b/drivers/staging/iio/accel/adis16203_core.c @@ -316,25 +316,27 @@ static int adis16203_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: - *val = 0; - if (chan->channel == 0) - *val2 = 1220; - else - *val2 = 610; + if (chan->channel == 0) { + *val = 1; + *val2 = 220000; /* 1.22 mV */ + } else { + *val = 0; + *val2 = 610000; /* 0.61 mV */ + } return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = -470000; + *val = -470; /* -0.47 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_INCLI: *val = 0; - *val2 = 25000; + *val2 = 25000; /* 0.025 degree */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 25000 / -470 - 1278; /* 25 C = 1278 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: bits = 14; -- cgit v0.10.2 From 9cc19b81d7363f630593ad7ceab9fa12a105fc25 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16204 channel offsets and scales Most of the channel offsets and scales in the adis16204 are incorrect: * Temperature scale is off by a factor of 1000 * Voltage scale is off by a factor of 1000 * Acceleration is scale is in g instead of m/(s**2) * Temperature offset is completely wrong This patch fixes these issues. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c index 05bdb7c..c6234c2 100644 --- a/drivers/staging/iio/accel/adis16204_core.c +++ b/drivers/staging/iio/accel/adis16204_core.c @@ -317,26 +317,28 @@ static int adis16204_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: - *val = 0; - if (chan->channel == 0) - *val2 = 1220; - else - *val2 = 610; + if (chan->channel == 0) { + *val = 1; + *val2 = 220000; /* 1.22 mV */ + } else { + *val = 0; + *val2 = 610000; /* 0.61 mV */ + } return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = -470000; + *val = -470; /* 0.47 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = 0; switch (chan->channel2) { case IIO_MOD_X: case IIO_MOD_ROOT_SUM_SQUARED_X_Y: - *val2 = 17125; + *val2 = IIO_G_TO_M_S_2(17125); /* 17.125 mg */ break; case IIO_MOD_Y: case IIO_MOD_Z: - *val2 = 8407; + *val2 = IIO_G_TO_M_S_2(8407); /* 8.407 mg */ break; } return IIO_VAL_INT_PLUS_MICRO; @@ -345,7 +347,7 @@ static int adis16204_read_raw(struct iio_dev *indio_dev, } break; case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 25000 / -470 - 1278; /* 25 C = 1278 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: case IIO_CHAN_INFO_PEAK: -- cgit v0.10.2 From d5304b771203b62430776f3fca4823670282cbe4 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16209 channel offsets and scales Most of the channel offsets and scales in the adis16209 are incorrect: * Temperature scale is of by a factor of 1000 * Voltage scale is of by a factor of 1000 * Temperature offset is completely wrong * Rotational position scale is missing This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the acceleration scale since this makes it much easier to compare it with the value given in the datasheet. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c index b7333bf..7ee974b 100644 --- a/drivers/staging/iio/accel/adis16209_core.c +++ b/drivers/staging/iio/accel/adis16209_core.c @@ -343,28 +343,29 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, case IIO_VOLTAGE: *val = 0; if (chan->channel == 0) - *val2 = 305180; + *val2 = 305180; /* 0.30518 mV */ else - *val2 = 610500; + *val2 = 610500; /* 0.6105 mV */ return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = -470000; + *val = -470; /* -0.47 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = 0; - *val2 = 2394; - return IIO_VAL_INT_PLUS_MICRO; + *val2 = IIO_G_TO_M_S_2(244140); /* 0.244140 mg */ + return IIO_VAL_INT_PLUS_NANO; case IIO_INCLI: + case IIO_ROT: *val = 0; - *val2 = 436; + *val2 = 25000; /* 0.025 degree */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } break; case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 25000 / -470 - 0x4FE; /* 25 C = 0x4FE */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: switch (chan->type) { @@ -491,6 +492,7 @@ static const struct iio_chan_spec adis16209_channels[] = { .modified = 1, .channel2 = IIO_MOD_X, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = rot, .scan_index = ADIS16209_SCAN_ROT, .scan_type = { -- cgit v0.10.2 From 45240340568a799fa140645af2a45600dfe68694 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16220 channel offsets and scales Most of the channel offsets and scales in the adis16220 are incorrect: * Temperature scale is off by a factor of 1000 * Voltage scale is off by a factor of 1000 * Acceleration seems to have a typo "187042" since it should be instead of "1887042" * Temperature offset is completely wrong This patch fixes these issues. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c index c755089..eaadd9d 100644 --- a/drivers/staging/iio/accel/adis16220_core.c +++ b/drivers/staging/iio/accel/adis16220_core.c @@ -486,7 +486,7 @@ static int adis16220_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_OFFSET: if (chan->type == IIO_TEMP) { - *val = 25; + *val = 25000 / -470 - 1278; /* 25 C = 1278 */ return IIO_VAL_INT; } addrind = 1; @@ -495,19 +495,22 @@ static int adis16220_read_raw(struct iio_dev *indio_dev, addrind = 2; break; case IIO_CHAN_INFO_SCALE: - *val = 0; switch (chan->type) { case IIO_TEMP: - *val2 = -470000; + *val = -470; /* -0.47 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: - *val2 = 1887042; + *val2 = IIO_G_TO_M_S_2(19073); /* 19.073 g */ return IIO_VAL_INT_PLUS_MICRO; case IIO_VOLTAGE: - if (chan->channel == 0) - *val2 = 0012221; - else /* Should really be dependent on VDD */ - *val2 = 305; + if (chan->channel == 0) { + *val = 1; + *val2 = 220700; /* 1.2207 mV */ + } else { + /* Should really be dependent on VDD */ + *val2 = 305180; /* 305.18 uV */ + } return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; -- cgit v0.10.2 From acba41f81f4380ad24905df4c3c0ad7f272b338f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16240 channel offsets and scales Most of the channel offsets and scales in the adis16240 are incorrect: * Temperature scale is of by a factor of 1000 * Voltage scale is of by a factor of 1000 * Temperature offset is completely wrong * Peak scale is completely wrong This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the acceleration scale since this makes it much easier to compare it to the value given in the datasheet. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c index 0fc26a49..35e0939 100644 --- a/drivers/staging/iio/accel/adis16240_core.c +++ b/drivers/staging/iio/accel/adis16240_core.c @@ -373,30 +373,31 @@ static int adis16240_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: - *val = 0; - if (chan->channel == 0) - *val2 = 4880; - else + if (chan->channel == 0) { + *val = 4; + *val2 = 880000; /* 4.88 mV */ + return IIO_VAL_INT_PLUS_MICRO; + } else { return -EINVAL; - return IIO_VAL_INT_PLUS_MICRO; + } case IIO_TEMP: - *val = 0; - *val2 = 244000; + *val = 244; /* 0.244 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = 0; - *val2 = 504062; + *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } break; case IIO_CHAN_INFO_PEAK_SCALE: - *val = 6; - *val2 = 629295; + *val = 0; + *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */ return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 25000 / 244 - 0x133; /* 25 C = 0x133 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: bits = 10; -- cgit v0.10.2 From 7e72a54c08c3a3d296c11139774e13cc80424060 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16260 channel offsets and scales Most of the channel offsets and scales in the adis16260 are incorrect: * Temperature scale is off by a factor of 1000 * Voltage scale is off by a factor of 1000 * Temperature offset is completely wrong This patch fixes these issues. Also use the IIO_DEGREE_TO_RAD for the angle velocity since this makes it much easier to compare it to the value given in the datasheet. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index 9571c03..aa964a2 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -498,28 +498,33 @@ static int adis16260_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ANGL_VEL: *val = 0; - if (spi_get_device_id(st->us)->driver_data) - *val2 = 320; - else - *val2 = 1278; + if (spi_get_device_id(st->us)->driver_data) { + /* 0.01832 degree / sec */ + *val2 = IIO_DEGREE_TO_RAD(18320); + } else { + /* 0.07326 degree / sec */ + *val2 = IIO_DEGREE_TO_RAD(73260); + } return IIO_VAL_INT_PLUS_MICRO; case IIO_VOLTAGE: - *val = 0; - if (chan->channel == 0) - *val2 = 18315; - else - *val2 = 610500; + if (chan->channel == 0) { + *val = 1; + *val2 = 831500; /* 1.8315 mV */ + } else { + *val = 0; + *val2 = 610500; /* 610.5 uV */ + } return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = 145300; + *val = 145; + *val2 = 300000; /* 0.1453 C */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } break; case IIO_CHAN_INFO_OFFSET: - *val = 25; + *val = 250000 / 1453; /* 25 C = 0x00 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: switch (chan->type) { -- cgit v0.10.2 From 1cf8c97f94a07e6d6461ae81b62abc2134b52c24 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio: Fix adis16400 channel offsets and scales Most of the channel offsets and scales in the adis16400 are incorrect: * Voltage scale is off by a factor of 1000 * Temperature scale is off by a factor of 1000 * Temperature offset is completely wrong * Some of the acceleration scales are either completely wrong or have the wrong unit * Some of the angular velocity scale are either completely wrong or have the wrong unit This patch fixes these issues. For consistency it also converts scales which are correct to use the IIO_G_TO_M_S_2 and IIO_DEGREE_TO_RAD macro. This makes it much easier to compare it to the value given in the datasheet. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index b302c9b..dccea95 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -553,10 +553,13 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_MICRO; case IIO_VOLTAGE: *val = 0; - if (chan->channel == 0) - *val2 = 2418; - else - *val2 = 806; + if (chan->channel == 0) { + *val = 2; + *val2 = 418000; /* 2.418 mV */ + } else { + *val = 0; + *val2 = 805800; /* 805.8 uV */ + } return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = 0; @@ -564,11 +567,11 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_MICRO; case IIO_MAGN: *val = 0; - *val2 = 500; + *val2 = 500; /* 0.5 mgauss */ return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - *val2 = 140000; + *val = 140; /* 0.14 C */ + *val2 = 0; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; @@ -585,10 +588,8 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, *val = val16; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - /* currently only temperature */ - *val = 198; - *val2 = 160000; - return IIO_VAL_INT_PLUS_MICRO; + *val = 2500 / 14; /* 25 C = 0x00 */ + return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: mutex_lock(&indio_dev->mlock); /* Need both the number of taps and the sampling frequency */ @@ -1058,7 +1059,7 @@ static struct adis16400_chip_info adis16400_chips[] = { [ADIS16300] = { .channels = adis16300_channels, .num_channels = ARRAY_SIZE(adis16300_channels), - .gyro_scale_micro = 873, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = 5884, .default_scan_mask = (1 << ADIS16400_SCAN_SUPPLY) | (1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_ACC_X) | @@ -1070,8 +1071,8 @@ static struct adis16400_chip_info adis16400_chips[] = { [ADIS16334] = { .channels = adis16334_channels, .num_channels = ARRAY_SIZE(adis16334_channels), - .gyro_scale_micro = 873, - .accel_scale_micro = 981, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ .default_scan_mask = (1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_GYRO_Y) | (1 << ADIS16400_SCAN_GYRO_Z) | (1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) | @@ -1080,8 +1081,8 @@ static struct adis16400_chip_info adis16400_chips[] = { [ADIS16350] = { .channels = adis16350_channels, .num_channels = ARRAY_SIZE(adis16350_channels), - .gyro_scale_micro = 872664, - .accel_scale_micro = 24732, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(73260), /* 0.07326 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(2522), /* 0.002522 g */ .default_scan_mask = 0x7FF, .flags = ADIS16400_NO_BURST, }, @@ -1090,8 +1091,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16350_channels), .flags = ADIS16400_HAS_PROD_ID, .product_id = 0x3FE8, - .gyro_scale_micro = 1279, - .accel_scale_micro = 24732, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */ .default_scan_mask = 0x7FF, }, [ADIS16362] = { @@ -1099,8 +1100,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16350_channels), .flags = ADIS16400_HAS_PROD_ID, .product_id = 0x3FEA, - .gyro_scale_micro = 1279, - .accel_scale_micro = 24732, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */ .default_scan_mask = 0x7FF, }, [ADIS16364] = { @@ -1108,8 +1109,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16350_channels), .flags = ADIS16400_HAS_PROD_ID, .product_id = 0x3FEC, - .gyro_scale_micro = 1279, - .accel_scale_micro = 24732, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ .default_scan_mask = 0x7FF, }, [ADIS16365] = { @@ -1117,8 +1118,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16350_channels), .flags = ADIS16400_HAS_PROD_ID, .product_id = 0x3FED, - .gyro_scale_micro = 1279, - .accel_scale_micro = 24732, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ .default_scan_mask = 0x7FF, }, [ADIS16400] = { @@ -1126,8 +1127,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16400_channels), .flags = ADIS16400_HAS_PROD_ID, .product_id = 0x4015, - .gyro_scale_micro = 873, - .accel_scale_micro = 32656, + .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ + .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */ .default_scan_mask = 0xFFF, } }; -- cgit v0.10.2 From 760ebc0d2af519dde91e39d22927d2be1bc57190 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio:adis16400: Report correct temperature scale and offset Temperature scale and offset differ between the different devices supported by this driver. Right now the driver always reports the temperature scale and offset of the adis16400 regardless of which chip variant is used. This patch adds two new attributes to the chip_info struct, one for the temperature scale and one for the temperature offset. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h index d59d7ac..77c601d 100644 --- a/drivers/staging/iio/imu/adis16400.h +++ b/drivers/staging/iio/imu/adis16400.h @@ -139,6 +139,8 @@ struct adis16400_chip_info { const long flags; unsigned int gyro_scale_micro; unsigned int accel_scale_micro; + int temp_scale_nano; + int temp_offset; unsigned long default_scan_mask; }; diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index dccea95..eaed87f 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -570,8 +570,8 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, *val2 = 500; /* 0.5 mgauss */ return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 140; /* 0.14 C */ - *val2 = 0; + *val = st->variant->temp_scale_nano / 1000000; + *val2 = (st->variant->temp_scale_nano % 1000000); return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; @@ -588,7 +588,8 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, *val = val16; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = 2500 / 14; /* 25 C = 0x00 */ + /* currently only temperature */ + *val = st->variant->temp_offset; return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: mutex_lock(&indio_dev->mlock); @@ -1061,6 +1062,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16300_channels), .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = 5884, + .temp_scale_nano = 140000000, /* 0.14 C */ + .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */ .default_scan_mask = (1 << ADIS16400_SCAN_SUPPLY) | (1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) | (1 << ADIS16400_SCAN_ACC_Z) | @@ -1073,6 +1076,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16334_channels), .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ + .temp_scale_nano = 67850000, /* 0.06785 C */ + .temp_offset = 25000000 / 67850, /* 25 C = 0x00 */ .default_scan_mask = (1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_GYRO_Y) | (1 << ADIS16400_SCAN_GYRO_Z) | (1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) | @@ -1083,6 +1088,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .num_channels = ARRAY_SIZE(adis16350_channels), .gyro_scale_micro = IIO_DEGREE_TO_RAD(73260), /* 0.07326 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(2522), /* 0.002522 g */ + .temp_scale_nano = 145300000, /* 0.1453 C */ + .temp_offset = 25000000 / 145300, /* 25 C = 0x00 */ .default_scan_mask = 0x7FF, .flags = ADIS16400_NO_BURST, }, @@ -1093,6 +1100,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .product_id = 0x3FE8, .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */ + .temp_scale_nano = 136000000, /* 0.136 C */ + .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */ .default_scan_mask = 0x7FF, }, [ADIS16362] = { @@ -1102,6 +1111,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .product_id = 0x3FEA, .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */ + .temp_scale_nano = 136000000, /* 0.136 C */ + .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */ .default_scan_mask = 0x7FF, }, [ADIS16364] = { @@ -1111,6 +1122,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .product_id = 0x3FEC, .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ + .temp_scale_nano = 136000000, /* 0.136 C */ + .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */ .default_scan_mask = 0x7FF, }, [ADIS16365] = { @@ -1120,6 +1133,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .product_id = 0x3FED, .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */ + .temp_scale_nano = 136000000, /* 0.136 C */ + .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */ .default_scan_mask = 0x7FF, }, [ADIS16400] = { @@ -1130,6 +1145,8 @@ static struct adis16400_chip_info adis16400_chips[] = { .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */ .default_scan_mask = 0xFFF, + .temp_scale_nano = 140000000, /* 0.14 C */ + .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */ } }; -- cgit v0.10.2 From 2e132e4692d627fd8aa0a1833e647d517531cb99 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 15 Oct 2012 10:35:00 +0100 Subject: staging:iio:adis16400: Fixup adis16336 temp channel attributes The temperature channel has a calibbias attribute which it should not have, but the offset attribute is missing. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index eaed87f..3144a7b 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -1037,7 +1037,7 @@ static const struct iio_chan_spec adis16334_channels[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .address = temp0, .scan_index = ADIS16400_SCAN_TEMP, -- cgit v0.10.2 From 8a745ee13fbbbead62fd7d3a3c15a270b1901d63 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 23 Sep 2012 11:03:00 +0200 Subject: m68k: Wire up kcmp Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index c004dfd..5fc7f7b 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include -#define NR_syscalls 347 +#define NR_syscalls 348 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index fdeb341..b94bfbf 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -352,5 +352,6 @@ #define __NR_setns 344 #define __NR_process_vm_readv 345 #define __NR_process_vm_writev 346 +#define __NR_kcmp 347 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index ce827b3..4fc2e29 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -367,4 +367,5 @@ ENTRY(sys_call_table) .long sys_setns .long sys_process_vm_readv /* 345 */ .long sys_process_vm_writev + .long sys_kcmp -- cgit v0.10.2 From 98f9c3c137cea016c57c9fd60b3caf88eb34e4cd Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 17 Oct 2012 09:36:00 +0100 Subject: iio: Remove duplicates for light/ in Kconfig and Makefile Signed-off-by: Andreas Larsson Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 6e3f143..fc937ac 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -62,7 +62,6 @@ source "drivers/iio/frequency/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/common/Kconfig" source "drivers/iio/gyro/Kconfig" -source "drivers/iio/light/Kconfig" source "drivers/iio/magnetometer/Kconfig" endif # IIO diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index f7fa3c0..761f2b6 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -18,5 +18,4 @@ obj-y += frequency/ obj-y += dac/ obj-y += common/ obj-y += gyro/ -obj-y += light/ obj-y += magnetometer/ -- cgit v0.10.2 From c2103b7ef7ecb4d17138b6ced4aad1b576affc4e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 22:06:47 +0800 Subject: xen/x86: remove duplicated include from enlighten.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) CC: stable@vger.kernel.org Signed-off-by: Wei Yongjun Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4466feb..783522b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -81,8 +81,6 @@ #include "smp.h" #include "multicalls.h" -#include - EXPORT_SYMBOL_GPL(hypercall_page); DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); -- cgit v0.10.2 From e9d1aa05da264cf7e1906b81a90d6abfdbe3700b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 12 Oct 2012 14:36:56 -0400 Subject: xen/xenbus: Fix compile warning. We were missing the 'void' on the parameter arguments. Reported-by: Fengguang Wu Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index 48220e1..f5dda83 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -625,7 +625,7 @@ static struct xenbus_watch *find_watch(const char *token) * so if we are running on anything older than 4 do not attempt to read * control/platform-feature-xs_reset_watches. */ -static bool xen_strict_xenbus_quirk() +static bool xen_strict_xenbus_quirk(void) { uint32_t eax, ebx, ecx, edx, base; -- cgit v0.10.2 From 8a5248fe10b101104d92d01438f918e899414fd1 Mon Sep 17 00:00:00 2001 From: Laszlo Ersek Date: Wed, 17 Oct 2012 11:55:55 +0200 Subject: xen PV passthru: assign SR-IOV virtual functions to separate virtual slots VFs are reported as single-function devices in PCI_HEADER_TYPE, which causes pci_scan_slot() in the PV domU to skip all VFs beyond #0 in the pciback-provided slot. Avoid this by assigning each VF to a separate virtual slot. Acked-by: Jan Beulich Signed-off-by: Laszlo Ersek Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/vpci.c b/drivers/xen/xen-pciback/vpci.c index 46d140b..0f478ac 100644 --- a/drivers/xen/xen-pciback/vpci.c +++ b/drivers/xen/xen-pciback/vpci.c @@ -89,9 +89,15 @@ static int __xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev, mutex_lock(&vpci_dev->lock); - /* Keep multi-function devices together on the virtual PCI bus */ - for (slot = 0; slot < PCI_SLOT_MAX; slot++) { - if (!list_empty(&vpci_dev->dev_list[slot])) { + /* + * Keep multi-function devices together on the virtual PCI bus, except + * virtual functions. + */ + if (!dev->is_virtfn) { + for (slot = 0; slot < PCI_SLOT_MAX; slot++) { + if (list_empty(&vpci_dev->dev_list[slot])) + continue; + t = list_entry(list_first(&vpci_dev->dev_list[slot]), struct pci_dev_entry, list); @@ -116,7 +122,7 @@ static int __xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev, pci_name(dev), slot); list_add_tail(&dev_entry->list, &vpci_dev->dev_list[slot]); - func = PCI_FUNC(dev->devfn); + func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn); goto unlock; } } -- cgit v0.10.2 From 7644bdac7f4d3e5910f4d3f86f1f2b098d1212ca Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:08 +0100 Subject: xen: xenbus: quirk uses x86 specific cpuid This breaks on ARM. This quirk is not necessary on ARM because no hypervisors of that vintage exist for that architecture (port is too new). Signed-off-by: Ian Campbell [v1: Moved the ifdef inside the function per Jan Beulich suggestion] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index f5dda83..acedeab 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -627,6 +627,7 @@ static struct xenbus_watch *find_watch(const char *token) */ static bool xen_strict_xenbus_quirk(void) { +#ifdef CONFIG_X86 uint32_t eax, ebx, ecx, edx, base; base = xen_cpuid_base(); @@ -634,6 +635,7 @@ static bool xen_strict_xenbus_quirk(void) if ((eax >> 16) < 4) return true; +#endif return false; } -- cgit v0.10.2 From 609b0b8c4608d59be261dde748f1ff1eccd748ba Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:09 +0100 Subject: xen: sysfs: include err.h for PTR_ERR etc Fixes build error on ARM: drivers/xen/sys-hypervisor.c: In function 'uuid_show_fallback': drivers/xen/sys-hypervisor.c:127:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/xen/sys-hypervisor.c:128:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index 5e5ad7e2..66a0a14 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 37ea0fcb6a3f3318bf45888e624722a2945cec04 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:10 +0100 Subject: xen: sysfs: fix build warning. Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix: drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat] Ideally this would use PRIx64 on ARM but these (or equivalent) don't seem to be available in the kernel. Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56..62160f2 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -31,7 +31,9 @@ /* Explicitly size integers that represent pfns in the interface with * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h index 28fc6211..c5b13e7 100644 --- a/arch/x86/include/asm/xen/interface.h +++ b/arch/x86/include/asm/xen/interface.h @@ -51,7 +51,9 @@ * with Xen so that on ARM we can have one ABI that works for 32 and 64 * bit guests. */ typedef unsigned long xen_pfn_t; +#define PRI_xen_pfn "lx" typedef unsigned long xen_ulong_t; +#define PRI_xen_ulong "lx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index 66a0a14..96453f8 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -285,7 +285,8 @@ static ssize_t virtual_start_show(struct hyp_sysfs_attr *attr, char *buffer) ret = HYPERVISOR_xen_version(XENVER_platform_parameters, parms); if (!ret) - ret = sprintf(buffer, "%lx\n", parms->virt_start); + ret = sprintf(buffer, "%"PRI_xen_ulong"\n", + parms->virt_start); kfree(parms); } -- cgit v0.10.2 From e84fe8a138fb1aa7aec8ef2fafb312ea5eb0f3dd Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:13 +0100 Subject: xen: XENMEM_translate_gpfn_list was remove ages ago and is unused. Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index b66d04c..90712e2 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -179,28 +179,8 @@ struct xen_add_to_physmap { }; DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); -/* - * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error - * code on failure. This call only works for auto-translated guests. - */ -#define XENMEM_translate_gpfn_list 8 -struct xen_translate_gpfn_list { - /* Which domain to translate for? */ - domid_t domid; - - /* Length of list. */ - xen_ulong_t nr_gpfns; - - /* List of GPFNs to translate. */ - GUEST_HANDLE(ulong) gpfn_list; - - /* - * Output list to contain MFN translations. May be the same as the input - * list (in which case each input GPFN is overwritten with the output MFN). - */ - GUEST_HANDLE(ulong) mfn_list; -}; -DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list); +/*** REMOVED ***/ +/*#define XENMEM_translate_gpfn_list 8*/ /* * Returns the pseudo-physical memory map as it was when the domain -- cgit v0.10.2 From bf86ad8095d4684ada0d37bb1355ede2c88a5e4e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:12 +0100 Subject: xen: events: pirq_check_eoi_map is X86 specific On ARM I see: drivers/xen/events.c:280:13: warning: 'pirq_check_eoi_map' defined but not used [-Wunused-function] Signed-off-by: Ian Campbell Cc: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 59e10a1..912ac81 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -115,7 +115,9 @@ struct irq_info { #define PIRQ_SHAREABLE (1 << 1) static int *evtchn_to_irq; +#ifdef CONFIG_X86 static unsigned long *pirq_eoi_map; +#endif static bool (*pirq_needs_eoi)(unsigned irq); static DEFINE_PER_CPU(unsigned long [NR_EVENT_CHANNELS/BITS_PER_LONG], @@ -277,10 +279,12 @@ static unsigned int cpu_from_evtchn(unsigned int evtchn) return ret; } +#ifdef CONFIG_X86 static bool pirq_check_eoi_map(unsigned irq) { return test_bit(pirq_from_irq(irq), pirq_eoi_map); } +#endif static bool pirq_needs_eoi_flag(unsigned irq) { -- cgit v0.10.2 From ef32f89298c094b6ed76c0c4981b7a51e939cb71 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:14 +0100 Subject: xen: grant: use xen_pfn_t type for frame_list. This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 62160f2..1d6ef9c 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -37,10 +37,8 @@ typedef uint64_t xen_ulong_t; /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330..859a9bb 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include #include -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h index c5b13e7..ca9487d 100644 --- a/arch/x86/include/asm/xen/interface.h +++ b/arch/x86/include/asm/xen/interface.h @@ -57,10 +57,8 @@ typedef unsigned long xen_ulong_t; /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 3a567b1..39aefa8 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -84,7 +84,7 @@ struct gnttab_ops { * nr_gframes is the number of frames to map grant table. Returning * GNTST_okay means success and negative value means failure. */ - int (*map_frames)(unsigned long *frames, unsigned int nr_gframes); + int (*map_frames)(xen_pfn_t *frames, unsigned int nr_gframes); /* * Release a list of frames which are mapped in map_frames for grant * entry status. @@ -958,7 +958,7 @@ static unsigned nr_status_frames(unsigned nr_grant_frames) return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP; } -static int gnttab_map_frames_v1(unsigned long *frames, unsigned int nr_gframes) +static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) { int rc; @@ -975,7 +975,7 @@ static void gnttab_unmap_frames_v1(void) arch_gnttab_unmap(gnttab_shared.addr, nr_grant_frames); } -static int gnttab_map_frames_v2(unsigned long *frames, unsigned int nr_gframes) +static int gnttab_map_frames_v2(xen_pfn_t *frames, unsigned int nr_gframes) { uint64_t *sframes; unsigned int nr_sframes; @@ -1027,7 +1027,7 @@ static void gnttab_unmap_frames_v2(void) static int gnttab_map(unsigned int start_idx, unsigned int end_idx) { struct gnttab_setup_table setup; - unsigned long *frames; + xen_pfn_t *frames; unsigned int nr_gframes = end_idx + 1; int rc; diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index ba0d775..962b7df 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -170,7 +170,7 @@ gnttab_set_unmap_op(struct gnttab_unmap_grant_ref *unmap, phys_addr_t addr, unmap->dev_bus_addr = 0; } -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared); int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes, diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h index f9f8b97..e40fae9 100644 --- a/include/xen/interface/grant_table.h +++ b/include/xen/interface/grant_table.h @@ -310,7 +310,7 @@ struct gnttab_setup_table { uint32_t nr_frames; /* OUT parameters. */ int16_t status; /* GNTST_* */ - GUEST_HANDLE(ulong) frame_list; + GUEST_HANDLE(xen_pfn_t) frame_list; }; DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table); -- cgit v0.10.2 From ee678518eb386f513ac7fd374f7e8b8792ee79f8 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:15 +0100 Subject: xen: balloon: don't include e820.h This breaks on !X86 and AFAICT is not required on X86 either. Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 31ab82f..d7bd1b3 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -55,7 +55,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From ee7b5958e2494619ee3ff52de68580feed6906a2 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:17 +0100 Subject: xen: arm: make p2m operations NOPs This makes common code less ifdef-y and is consistent with PVHVM on x86. Also note that phys_to_machine_mapping_valid should take a pfn argument and make it do so. Add __set_phys_to_machine, make set_phys_to_machine a simple wrapper (on systems with non-nop implementations the outer one can allocate new p2m pages). Make __set_phys_to_machine check for identity mapping or invalid only. Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 1742023..c6b9096 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ -- cgit v0.10.2 From a349e23d1cf746f8bdc603dcc61fae9ee4a695f6 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 19 Oct 2012 17:29:07 +0100 Subject: xen/x86: don't corrupt %eip when returning from a signal handler In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by: David Vrabel Acked-by: Jan Beulich Acked-by: Ian Campbell Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 623f288..8f8e8ee 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1016,7 +1016,7 @@ ENTRY(xen_sysenter_target) ENTRY(xen_hypervisor_callback) CFI_STARTPROC - pushl_cfi $0 + pushl_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL TRACE_IRQS_OFF @@ -1058,14 +1058,16 @@ ENTRY(xen_failsafe_callback) 2: mov 8(%esp),%es 3: mov 12(%esp),%fs 4: mov 16(%esp),%gs + /* EAX == 0 => Category 1 (Bad segment) + EAX != 0 => Category 2 (Bad IRET) */ testl %eax,%eax popl_cfi %eax lea 16(%esp),%esp CFI_ADJUST_CFA_OFFSET -16 jz 5f addl $16,%esp - jmp iret_exc # EAX != 0 => Category 2 (Bad IRET) -5: pushl_cfi $0 # EAX == 0 => Category 1 (Bad segment) + jmp iret_exc +5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL jmp ret_from_exception CFI_ENDPROC diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 69babd8..dcdd0ea 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1363,7 +1363,7 @@ ENTRY(xen_failsafe_callback) CFI_RESTORE r11 addq $0x30,%rsp CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $0 + pushq_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL jmp error_exit CFI_ENDPROC -- cgit v0.10.2 From 965c0aaafe3e75d4e65cd4ec862915869bde3abd Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:16 +0100 Subject: xen: balloon: use correct type for frame_list This is now a xen_pfn_t. Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index d7bd1b3..d6886d9 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -87,7 +87,7 @@ struct balloon_stats balloon_stats; EXPORT_SYMBOL_GPL(balloon_stats); /* We increase/decrease in batches which fit in a page */ -static unsigned long frame_list[PAGE_SIZE / sizeof(unsigned long)]; +static xen_pfn_t frame_list[PAGE_SIZE / sizeof(unsigned long)]; #ifdef CONFIG_HIGHMEM #define inc_totalhigh_pages() (totalhigh_pages++) -- cgit v0.10.2 From 3ab0b83bf6a1e834f4b884150d8012990c75d25d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 18 Oct 2012 08:26:17 +0100 Subject: xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 1d6ef9c..5000397 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,7 +29,13 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; #define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; -- cgit v0.10.2 From 801e7fb738c1049d93417dd8c2c4bf9cf567b668 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 17 Oct 2012 09:39:11 +0100 Subject: xen: dbgp: Fix warning when CONFIG_PCI is not enabled. I saw this on ARM: linux/drivers/xen/dbgp.c:11:23: warning: unused variable 'ctrlr' [-Wunused-variable] Acked-by: Stefano Stabellini Signed-off-by: Ian Campbell Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/dbgp.c b/drivers/xen/dbgp.c index 42569c7..f3ccc80 100644 --- a/drivers/xen/dbgp.c +++ b/drivers/xen/dbgp.c @@ -8,7 +8,9 @@ static int xen_dbgp_op(struct usb_hcd *hcd, int op) { +#ifdef CONFIG_PCI const struct device *ctrlr = hcd_to_bus(hcd)->controller; +#endif struct physdev_dbgp_op dbgp; if (!xen_initial_domain()) -- cgit v0.10.2 From c31407a3672aaebb4acddf90944a114fa5c8af7b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 18 Oct 2012 21:07:01 +0100 Subject: drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-and-tested-by: Francois Tigeot Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55375 Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 40d72bd..224ae5f 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -778,6 +778,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "D525TUD"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Supermicro X7SPA-H", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"), + }, + }, { } /* terminating entry */ }; -- cgit v0.10.2 From 74ce6b6c63262defba91c4d790b3f91074793c0d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 19 Oct 2012 15:51:06 +0100 Subject: drm/i915: Initialize obj->pages before use by i915_gem_object_do_bit17_swizzle() If we leave obj->pages set to NULL before attempting to deswizzle them, then an OOPS is well deserved. Fixes regression introduced in commit 9da3da660d8c19a54f6e93361d147509be3fff84 Author: Chris Wilson Date: Fri Jun 1 15:20:22 2012 +0100 drm/i915: Replace the array of pages with a scatterlist Reported-and-tested-by: Krzysztof Kolasa Signed-off-by: Chris Wilson Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 45888d2..8bc7ba7 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1825,10 +1825,11 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) sg_set_page(sg, page, PAGE_SIZE, 0); } + obj->pages = st; + if (i915_gem_object_needs_bit17_swizzle(obj)) i915_gem_object_do_bit_17_swizzle(obj); - obj->pages = st; return 0; err_pages: -- cgit v0.10.2 From 84f98fdf7865fbd35b312eb39ea91e5618c514c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Stef=C3=A1n=20Freyr?= Date: Fri, 19 Oct 2012 22:46:00 +0200 Subject: ALSA: hda - add dock support for Thinkpad T430 I have a Lenovo ThinkPad T430 and an UltraBase Series 3 docking station. Without this patch, if I plug my headphones into the jack on the computer, everything works fine. The computer speakers mute and the audio is played in the headphones. However, if I plug into the docking station headphone jack the computer speakers are muted but there is no audio in the headphones. Addresses https://bugs.launchpad.net/bugs/1060372 Signed-off-by: Joseph Salisbury Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 48d9d60..2c62edd 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6188,6 +6188,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), -- cgit v0.10.2 From 9bb71308b8133d643648776243e4d5599b1c193d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 18 Oct 2012 17:52:07 -0700 Subject: Revert "cgroup: Drop task_lock(parent) on cgroup_fork()" This reverts commit 7e381b0eb1e1a9805c37335562e8dc02e7d7848c. The commit incorrectly assumed that fork path always performed threadgroup_change_begin/end() and depended on that for synchronization against task exit and cgroup migration paths instead of explicitly grabbing task_lock(). threadgroup_change is not locked when forking a new process (as opposed to a new thread in the same process) and even if it were it wouldn't be effective as different processes use different threadgroup locks. Revert the incorrect optimization. Signed-off-by: Tejun Heo LKML-Reference: <20121008020000.GB2575@localhost> Acked-by: Li Zefan Bitterly-Acked-by: Frederic Weisbecker Cc: stable@vger.kernel.org diff --git a/kernel/cgroup.c b/kernel/cgroup.c index d1739fc..75aec12 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -4814,31 +4814,20 @@ static const struct file_operations proc_cgroupstats_operations = { * * A pointer to the shared css_set was automatically copied in * fork.c by dup_task_struct(). However, we ignore that copy, since - * it was not made under the protection of RCU, cgroup_mutex or - * threadgroup_change_begin(), so it might no longer be a valid - * cgroup pointer. cgroup_attach_task() might have already changed - * current->cgroups, allowing the previously referenced cgroup - * group to be removed and freed. - * - * Outside the pointer validity we also need to process the css_set - * inheritance between threadgoup_change_begin() and - * threadgoup_change_end(), this way there is no leak in any process - * wide migration performed by cgroup_attach_proc() that could otherwise - * miss a thread because it is too early or too late in the fork stage. + * it was not made under the protection of RCU or cgroup_mutex, so + * might no longer be a valid cgroup pointer. cgroup_attach_task() might + * have already changed current->cgroups, allowing the previously + * referenced cgroup group to be removed and freed. * * At the point that cgroup_fork() is called, 'current' is the parent * task, and the passed argument 'child' points to the child task. */ void cgroup_fork(struct task_struct *child) { - /* - * We don't need to task_lock() current because current->cgroups - * can't be changed concurrently here. The parent obviously hasn't - * exited and called cgroup_exit(), and we are synchronized against - * cgroup migration through threadgroup_change_begin(). - */ + task_lock(current); child->cgroups = current->cgroups; get_css_set(child->cgroups); + task_unlock(current); INIT_LIST_HEAD(&child->cg_list); } -- cgit v0.10.2 From d87838321124061f6c935069d97f37010fa417e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 18 Oct 2012 17:40:30 -0700 Subject: Revert "cgroup: Remove task_lock() from cgroup_post_fork()" This reverts commit 7e3aa30ac8c904a706518b725c451bb486daaae9. The commit incorrectly assumed that fork path always performed threadgroup_change_begin/end() and depended on that for synchronization against task exit and cgroup migration paths instead of explicitly grabbing task_lock(). threadgroup_change is not locked when forking a new process (as opposed to a new thread in the same process) and even if it were it wouldn't be effective as different processes use different threadgroup locks. Revert the incorrect optimization. Signed-off-by: Tejun Heo LKML-Reference: <20121008020000.GB2575@localhost> Acked-by: Li Zefan Cc: Frederic Weisbecker Cc: stable@vger.kernel.org diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 75aec12..f24f724 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -4883,19 +4883,10 @@ void cgroup_post_fork(struct task_struct *child) */ if (use_task_css_set_links) { write_lock(&css_set_lock); - if (list_empty(&child->cg_list)) { - /* - * It's safe to use child->cgroups without task_lock() - * here because we are protected through - * threadgroup_change_begin() against concurrent - * css_set change in cgroup_task_migrate(). Also - * the task can't exit at that point until - * wake_up_new_task() is called, so we are protected - * against cgroup_exit() setting child->cgroup to - * init_css_set. - */ + task_lock(child); + if (list_empty(&child->cg_list)) list_add(&child->cg_list, &child->cgroups->tasks); - } + task_unlock(child); write_unlock(&css_set_lock); } } -- cgit v0.10.2 From a05123bdd1b9ba961ed262864924a5b3ee81afe8 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Tue, 21 Aug 2012 17:08:37 +0800 Subject: perf/x86: Disable uncore on virtualized CPUs Initializing uncore PMU on virtualized CPU may hang the kernel. This is because kvm does not emulate the entire hardware. Thers are lots of uncore related MSRs, making kvm enumerate them all is a non-trival task. So just disable uncore on virtualized CPU. Signed-off-by: Yan, Zheng Tested-by: Pekka Enberg Cc: a.p.zijlstra@chello.nl Cc: eranian@google.com Cc: andi@firstfloor.org Cc: avi@redhat.com Link: http://lkml.kernel.org/r/1345540117-14164-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 99d96a4..5df8d32 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -2926,6 +2926,9 @@ static int __init intel_uncore_init(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) return -ENODEV; + if (cpu_has_hypervisor) + return -ENODEV; + ret = uncore_pci_init(); if (ret) goto fail; -- cgit v0.10.2 From 41285a98f8f052b59f01bbbcb0064e5e41b0ca2d Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:22 +0200 Subject: ALSA: hdspm - Allow DDS/Varispeed to be set from userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DDS value is the actual physical sample rate. We set it indirectly when selecting 44100, 48000 and so on via snd_hdspm_hw_params or hdspm_set_clock_source. This commit now allows the DDS value to be altered at runtime, thus speeding up or slowing down the physical sample rate. This is required for MADI's varispeed that allows for ±12.5% speed adjustment from the "selected" rate (32kHz, 44100kHz, 48kHz and so on). Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index b12308b..742bd5e 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2003,8 +2003,10 @@ static int hdspm_get_system_sample_rate(struct hdspm *hdspm) { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ - .access = SNDRV_CTL_ELEM_ACCESS_READ, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\ + SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdspm_info_system_sample_rate, \ + .put = snd_hdspm_put_system_sample_rate, \ .get = snd_hdspm_get_system_sample_rate \ } @@ -2030,6 +2032,16 @@ static int snd_hdspm_get_system_sample_rate(struct snd_kcontrol *kcontrol, return 0; } +static int snd_hdspm_put_system_sample_rate(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value * + ucontrol) +{ + struct hdspm *hdspm = snd_kcontrol_chip(kcontrol); + + hdspm_set_dds_value(hdspm, ucontrol->value.enumerated.item[0]); + return 0; +} + /** * Returns the WordClock sample rate class for the given card. -- cgit v0.10.2 From 21a164df0c1c2e72d4bb78b2f67dc75a1c9d14fb Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:23 +0200 Subject: ALSA: hdspm - Report external rate in slave mode on PCI MADI As a follow-up to a97bda7d29d02a2e9c6609d0947b15e55f5200e5, report the external sample rate as system_sample_rate when in slave mode. For PCIe MADI cards, the DDS value automatically contains the external sample rate, but the PCI version needs this manual workaround. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 742bd5e..1131a8a 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -971,6 +971,7 @@ static inline void snd_hdspm_initialize_midi_flush(struct hdspm *hdspm); static int hdspm_update_simple_mixer_controls(struct hdspm *hdspm); static int hdspm_autosync_ref(struct hdspm *hdspm); static int snd_hdspm_set_defaults(struct hdspm *hdspm); +static int hdspm_system_clock_mode(struct hdspm *hdspm); static void hdspm_set_sgbuf(struct hdspm *hdspm, struct snd_pcm_substream *substream, unsigned int reg, int channels); @@ -1989,10 +1990,14 @@ static int hdspm_get_system_sample_rate(struct hdspm *hdspm) rate = hdspm_calc_dds_value(hdspm, period); if (rate > 207000) { - /* Unreasonable high sample rate as seen on PCI MADI cards. - * Use the cached value instead. - */ - rate = hdspm->system_sample_rate; + /* Unreasonable high sample rate as seen on PCI MADI cards. */ + if (0 == hdspm_system_clock_mode(hdspm)) { + /* master mode, return internal sample rate */ + rate = hdspm->system_sample_rate; + } else { + /* slave mode, return external sample rate */ + rate = hdspm_external_sample_rate(hdspm); + } } return rate; -- cgit v0.10.2 From fba30fd342beda8e7908f214d9e7f8a62dcdc57d Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:24 +0200 Subject: ALSA: hdspm - Fix sync check reporting on all RME HDSPM cards Due to missing breaks and the resulting fall-through, card subtype selection was effectively missing, thus causing the wrong sync check functions to be called. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 1131a8a..81d83fa 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -3959,6 +3959,7 @@ static int snd_hdspm_get_sync_check(struct snd_kcontrol *kcontrol, default: val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1); } + break; case AIO: switch (kcontrol->private_value) { @@ -3971,6 +3972,7 @@ static int snd_hdspm_get_sync_check(struct snd_kcontrol *kcontrol, default: val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1); } + break; case MADI: switch (kcontrol->private_value) { @@ -3983,6 +3985,7 @@ static int snd_hdspm_get_sync_check(struct snd_kcontrol *kcontrol, case 3: /* SYNC_IN */ val = hdspm_sync_in_sync_check(hdspm); break; } + break; case MADIface: val = hdspm_madi_sync_check(hdspm); /* MADI */ @@ -4000,6 +4003,7 @@ static int snd_hdspm_get_sync_check(struct snd_kcontrol *kcontrol, val = hdspm_aes_sync_check(hdspm, kcontrol->private_value-1); } + break; } -- cgit v0.10.2 From d681deaa74748ce1d4b1a862438c955b70f46690 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:25 +0200 Subject: ALSA: hdspm - Fix reported autosync_sample_rate Missing breaks lead to a fall-through, thus causing the wrong autosync_sample_rate to be reported. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 81d83fa..976e3a6 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2180,6 +2180,7 @@ static int snd_hdspm_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, hdspm_get_s1_sample_rate(hdspm, kcontrol->private_value-1); } + break; case AIO: switch (kcontrol->private_value) { @@ -2200,6 +2201,7 @@ static int snd_hdspm_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, hdspm_get_s1_sample_rate(hdspm, ucontrol->id.index-1); } + break; case AES32: @@ -2221,8 +2223,8 @@ static int snd_hdspm_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, hdspm_get_s1_sample_rate(hdspm, kcontrol->private_value-1); break; - } + break; default: break; } -- cgit v0.10.2 From b8812c55c5e59596bbf4b1d3e5b4b3ef50a89cad Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:26 +0200 Subject: ALSA: hdspm - Also report autosync_sample_rate on MADI and MADIface MADI and MADIface used to report the autosync_sample_rate. This functionality was lost in commit 0dca1793063c28dde8f6c49c9c72203fe5cb6efc, this commit now adds it back. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 976e3a6..5f243ae 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2225,6 +2225,21 @@ static int snd_hdspm_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, break; } break; + + case MADI: + case MADIface: + { + int rate = hdspm_external_sample_rate(hdspm); + int i, selected_rate = 0; + for (i = 1; i < 10; i++) + if (HDSPM_bit2freq(i) == rate) { + selected_rate = i; + break; + } + ucontrol->value.enumerated.item[0] = selected_rate; + } + break; + default: break; } @@ -4450,6 +4465,7 @@ static struct snd_kcontrol_new snd_hdspm_controls_madi[] = { HDSPM_PREF_SYNC_REF("Preferred Sync Reference", 0), HDSPM_AUTOSYNC_REF("AutoSync Reference", 0), HDSPM_SYSTEM_SAMPLE_RATE("System Sample Rate", 0), + HDSPM_AUTOSYNC_SAMPLE_RATE("External Rate", 0), HDSPM_SYNC_CHECK("WC SyncCheck", 0), HDSPM_SYNC_CHECK("MADI SyncCheck", 1), HDSPM_SYNC_CHECK("TCO SyncCHeck", 2), -- cgit v0.10.2 From 2e0452f544758d798ba76016c00783f654b43fe3 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:27 +0200 Subject: ALSA: hdspm - Fix sync_in reporting on RME MADI cards In contrast to AES32, MADI uses the first status register to report the sync_in status. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 5f243ae..5d70efe 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -3885,6 +3885,11 @@ static int hdspm_sync_in_sync_check(struct hdspm *hdspm) break; case MADI: + status = hdspm_read(hdspm, HDSPM_statusRegister); + lock = (status & HDSPM_syncInLock) ? 1 : 0; + sync = (status & HDSPM_syncInSync) ? 1 : 0; + break; + case AES32: status = hdspm_read(hdspm, HDSPM_statusRegister2); lock = (status & HDSPM_syncInLock) ? 1 : 0; -- cgit v0.10.2 From 9a215f47da029b04bf92f1f68abf978211155ceb Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:28 +0200 Subject: ALSA: hdspm - Fix sync_in detection on AES/AES32 According to the documentation, AES32 cards use a different bit position for reporting the sync_in status. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 5d70efe..b8b15ee 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -3892,8 +3892,8 @@ static int hdspm_sync_in_sync_check(struct hdspm *hdspm) case AES32: status = hdspm_read(hdspm, HDSPM_statusRegister2); - lock = (status & HDSPM_syncInLock) ? 1 : 0; - sync = (status & HDSPM_syncInSync) ? 1 : 0; + lock = (status & 0x100000) ? 1 : 0; + sync = (status & 0x200000) ? 1 : 0; break; case MADIface: -- cgit v0.10.2 From 930f4ff078b9c4484b0e9383fc17a04d4f9253bf Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:29 +0200 Subject: ALSA: hdspm - Fix typo in kcontrol element on RME MADI cards Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index b8b15ee..0965804 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -4473,7 +4473,7 @@ static struct snd_kcontrol_new snd_hdspm_controls_madi[] = { HDSPM_AUTOSYNC_SAMPLE_RATE("External Rate", 0), HDSPM_SYNC_CHECK("WC SyncCheck", 0), HDSPM_SYNC_CHECK("MADI SyncCheck", 1), - HDSPM_SYNC_CHECK("TCO SyncCHeck", 2), + HDSPM_SYNC_CHECK("TCO SyncCheck", 2), HDSPM_SYNC_CHECK("SYNC IN SyncCheck", 3), HDSPM_LINE_OUT("Line Out", 0), HDSPM_TX_64("TX 64 channels mode", 0), -- cgit v0.10.2 From f27a64f9973ff932ece576793c195de60c1c6c9b Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Fri, 19 Oct 2012 17:42:30 +0200 Subject: ALSA: hdspm - Fix coding style in CTL_ELEM macros checkpatch.pl discourages the use of spaces at the beginning of lines. Some of the CTL_ELEM defines were not properly indented. This patch replaces the leading spaces by tabs. No functionality is changed, the commit is purely cosmetic. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 0965804..f1cd1e3 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2005,14 +2005,14 @@ static int hdspm_get_system_sample_rate(struct hdspm *hdspm) #define HDSPM_SYSTEM_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\ - SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ - .info = snd_hdspm_info_system_sample_rate, \ - .put = snd_hdspm_put_system_sample_rate, \ - .get = snd_hdspm_get_system_sample_rate \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\ + SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ + .info = snd_hdspm_info_system_sample_rate, \ + .put = snd_hdspm_put_system_sample_rate, \ + .get = snd_hdspm_get_system_sample_rate \ } static int snd_hdspm_info_system_sample_rate(struct snd_kcontrol *kcontrol, @@ -2464,7 +2464,7 @@ static int snd_hdspm_put_clock_source(struct snd_kcontrol *kcontrol, #define HDSPM_PREF_SYNC_REF(xname, xindex) \ -{.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\ @@ -2800,12 +2800,12 @@ static int snd_hdspm_put_pref_sync_ref(struct snd_kcontrol *kcontrol, #define HDSPM_AUTOSYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .access = SNDRV_CTL_ELEM_ACCESS_READ, \ - .info = snd_hdspm_info_autosync_ref, \ - .get = snd_hdspm_get_autosync_ref, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .access = SNDRV_CTL_ELEM_ACCESS_READ, \ + .info = snd_hdspm_info_autosync_ref, \ + .get = snd_hdspm_get_autosync_ref, \ } static int hdspm_autosync_ref(struct hdspm *hdspm) @@ -2889,12 +2889,12 @@ static int snd_hdspm_get_autosync_ref(struct snd_kcontrol *kcontrol, #define HDSPM_LINE_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_line_out, \ - .get = snd_hdspm_get_line_out, \ - .put = snd_hdspm_put_line_out \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_line_out, \ + .get = snd_hdspm_get_line_out, \ + .put = snd_hdspm_put_line_out \ } static int hdspm_line_out(struct hdspm * hdspm) @@ -2946,12 +2946,12 @@ static int snd_hdspm_put_line_out(struct snd_kcontrol *kcontrol, #define HDSPM_TX_64(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_tx_64, \ - .get = snd_hdspm_get_tx_64, \ - .put = snd_hdspm_put_tx_64 \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_tx_64, \ + .get = snd_hdspm_get_tx_64, \ + .put = snd_hdspm_put_tx_64 \ } static int hdspm_tx_64(struct hdspm * hdspm) @@ -3002,12 +3002,12 @@ static int snd_hdspm_put_tx_64(struct snd_kcontrol *kcontrol, #define HDSPM_C_TMS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_c_tms, \ - .get = snd_hdspm_get_c_tms, \ - .put = snd_hdspm_put_c_tms \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_c_tms, \ + .get = snd_hdspm_get_c_tms, \ + .put = snd_hdspm_put_c_tms \ } static int hdspm_c_tms(struct hdspm * hdspm) @@ -3058,12 +3058,12 @@ static int snd_hdspm_put_c_tms(struct snd_kcontrol *kcontrol, #define HDSPM_SAFE_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_safe_mode, \ - .get = snd_hdspm_get_safe_mode, \ - .put = snd_hdspm_put_safe_mode \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_safe_mode, \ + .get = snd_hdspm_get_safe_mode, \ + .put = snd_hdspm_put_safe_mode \ } static int hdspm_safe_mode(struct hdspm * hdspm) @@ -3114,12 +3114,12 @@ static int snd_hdspm_put_safe_mode(struct snd_kcontrol *kcontrol, #define HDSPM_EMPHASIS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_emphasis, \ - .get = snd_hdspm_get_emphasis, \ - .put = snd_hdspm_put_emphasis \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_emphasis, \ + .get = snd_hdspm_get_emphasis, \ + .put = snd_hdspm_put_emphasis \ } static int hdspm_emphasis(struct hdspm * hdspm) @@ -3170,12 +3170,12 @@ static int snd_hdspm_put_emphasis(struct snd_kcontrol *kcontrol, #define HDSPM_DOLBY(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_dolby, \ - .get = snd_hdspm_get_dolby, \ - .put = snd_hdspm_put_dolby \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_dolby, \ + .get = snd_hdspm_get_dolby, \ + .put = snd_hdspm_put_dolby \ } static int hdspm_dolby(struct hdspm * hdspm) @@ -3226,12 +3226,12 @@ static int snd_hdspm_put_dolby(struct snd_kcontrol *kcontrol, #define HDSPM_PROFESSIONAL(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_professional, \ - .get = snd_hdspm_get_professional, \ - .put = snd_hdspm_put_professional \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_professional, \ + .get = snd_hdspm_get_professional, \ + .put = snd_hdspm_put_professional \ } static int hdspm_professional(struct hdspm * hdspm) @@ -3281,12 +3281,12 @@ static int snd_hdspm_put_professional(struct snd_kcontrol *kcontrol, } #define HDSPM_INPUT_SELECT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_input_select, \ - .get = snd_hdspm_get_input_select, \ - .put = snd_hdspm_put_input_select \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_input_select, \ + .get = snd_hdspm_get_input_select, \ + .put = snd_hdspm_put_input_select \ } static int hdspm_input_select(struct hdspm * hdspm) @@ -3353,12 +3353,12 @@ static int snd_hdspm_put_input_select(struct snd_kcontrol *kcontrol, #define HDSPM_DS_WIRE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_ds_wire, \ - .get = snd_hdspm_get_ds_wire, \ - .put = snd_hdspm_put_ds_wire \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_ds_wire, \ + .get = snd_hdspm_get_ds_wire, \ + .put = snd_hdspm_put_ds_wire \ } static int hdspm_ds_wire(struct hdspm * hdspm) @@ -3425,12 +3425,12 @@ static int snd_hdspm_put_ds_wire(struct snd_kcontrol *kcontrol, #define HDSPM_QS_WIRE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = xname, \ - .index = xindex, \ - .info = snd_hdspm_info_qs_wire, \ - .get = snd_hdspm_get_qs_wire, \ - .put = snd_hdspm_put_qs_wire \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_hdspm_info_qs_wire, \ + .get = snd_hdspm_get_qs_wire, \ + .put = snd_hdspm_put_qs_wire \ } static int hdspm_qs_wire(struct hdspm * hdspm) @@ -3597,15 +3597,15 @@ static int snd_hdspm_put_madi_speedmode(struct snd_kcontrol *kcontrol, } #define HDSPM_MIXER(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ - .name = xname, \ - .index = xindex, \ - .device = 0, \ - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ - SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ - .info = snd_hdspm_info_mixer, \ - .get = snd_hdspm_get_mixer, \ - .put = snd_hdspm_put_mixer \ +{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ + .name = xname, \ + .index = xindex, \ + .device = 0, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ + SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ + .info = snd_hdspm_info_mixer, \ + .get = snd_hdspm_get_mixer, \ + .put = snd_hdspm_put_mixer \ } static int snd_hdspm_info_mixer(struct snd_kcontrol *kcontrol, @@ -3704,12 +3704,12 @@ static int snd_hdspm_put_mixer(struct snd_kcontrol *kcontrol, */ #define HDSPM_PLAYBACK_MIXER \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \ - SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ - .info = snd_hdspm_info_playback_mixer, \ - .get = snd_hdspm_get_playback_mixer, \ - .put = snd_hdspm_put_playback_mixer \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \ + SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ + .info = snd_hdspm_info_playback_mixer, \ + .get = snd_hdspm_get_playback_mixer, \ + .put = snd_hdspm_put_playback_mixer \ } static int snd_hdspm_info_playback_mixer(struct snd_kcontrol *kcontrol, -- cgit v0.10.2 From cb766404e6b8c566569eb9ada02ea45d28729864 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 20 Oct 2012 10:55:21 +0200 Subject: ALSA: hda - Fix silent headphone output from Toshiba P200 By some reason, Toshiba laptop doesn't like the EAPD turned up for the headphone pin. Add a fix up code to force to turn down EAPD for NID 0x15. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=569991 Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2c62edd..f7397ad 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5677,6 +5677,7 @@ static const struct hda_verb alc268_beep_init_verbs[] = { enum { ALC268_FIXUP_INV_DMIC, + ALC268_FIXUP_HP_EAPD, }; static const struct alc_fixup alc268_fixups[] = { @@ -5684,10 +5685,26 @@ static const struct alc_fixup alc268_fixups[] = { .type = ALC_FIXUP_FUNC, .v.func = alc_fixup_inv_dmic_0x12, }, + [ALC268_FIXUP_HP_EAPD] = { + .type = ALC_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0}, + {} + } + }, }; static const struct alc_model_fixup alc268_fixup_models[] = { {.id = ALC268_FIXUP_INV_DMIC, .name = "inv-dmic"}, + {.id = ALC268_FIXUP_HP_EAPD, .name = "hp-eapd"}, + {} +}; + +static const struct snd_pci_quirk alc268_fixup_tbl[] = { + /* below is codec SSID since multiple Toshiba laptops have the + * same PCI SSID 1179:ff00 + */ + SND_PCI_QUIRK(0x1179, 0xff06, "Toshiba P200", ALC268_FIXUP_HP_EAPD), {} }; @@ -5722,7 +5739,7 @@ static int patch_alc268(struct hda_codec *codec) spec = codec->spec; - alc_pick_fixup(codec, alc268_fixup_models, NULL, alc268_fixups); + alc_pick_fixup(codec, alc268_fixup_models, alc268_fixup_tbl, alc268_fixups); alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); /* automatic parse from the BIOS config */ -- cgit v0.10.2 From edb66893860dbc0631afc2807efdb209a03d57a2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 21 Oct 2012 12:52:03 +0200 Subject: ALSA: sound/isa/opti9xx/miro.c: eliminate possible double free snd_miro_probe is a static function that is only called twice in the file that defines it. At each call site, its argument is freed using snd_card_free. Thus, there is no need for snd_miro_probe to call snd_card_free on its argument on any of its error exit paths. Because snd_card_free both reads the fields of its argument and kfrees its argments, the results of the second snd_card_free should be unpredictable. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f,free,a; parameter list[n] ps; type T; expression e; @@ f(ps,T a,...) { ... when any when != a = e if(...) { ... free(a); ... return ...; } ... when any } @@ identifier r.f,r.free; expression x,a; expression list[r.n] xs; @@ * x = f(xs,a,...); if (...) { ... free(a); ... return ...; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 3d1afb6..4a7ff4e 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -1286,7 +1286,6 @@ static int __devinit snd_miro_probe(struct snd_card *card) error = snd_card_miro_aci_detect(card, miro); if (error < 0) { - snd_card_free(card); snd_printk(KERN_ERR "unable to detect aci chip\n"); return -ENODEV; } -- cgit v0.10.2 From fd0587339d80dd2fea5ead7f734676c9c618eace Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 21 Oct 2012 12:05:51 +0200 Subject: Documentation: Reflect the new location of the NMI watchdog info Commit 9919cba7 ("watchdog: Update documentation") moved the NMI watchdog documentation from nmi_watchdog.txt to lockup-watchdogs.txt. Update the index file accordingly. Signed-off-by: Jean Delvare Cc: Fernando Luis Vazquez Cao Cc: Randy Dunlap Cc: Don Zickus Link: http://lkml.kernel.org/r/20121021120551.4656d99b@endymion.delvare Signed-off-by: Ingo Molnar diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 49c0513..fec55dc 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -210,6 +210,8 @@ local_ops.txt - semantics and behavior of local atomic operations. lockdep-design.txt - documentation on the runtime locking correctness validator. +lockup-watchdogs.txt + - info on soft and hard lockup detectors (aka nmi_watchdog). logo.gif - full colour GIF image of Linux logo (penguin - Tux). logo.txt @@ -240,8 +242,6 @@ netlabel/ - directory with information on the NetLabel subsystem. networking/ - directory with info on various aspects of networking with Linux. -nmi_watchdog.txt - - info on NMI watchdog for SMP systems. nommu-mmap.txt - documentation about no-mmu memory mapping support. numastat.txt -- cgit v0.10.2 From 61ef3c0bd3ccc9552ea4e54f5003a21ba45ceb44 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 22 Oct 2012 08:16:44 +0900 Subject: ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt This patch adds missing initializer of .smp field of machine descriptor of EXYNOS 4 DT machine. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786..eadf4b5 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, -- cgit v0.10.2 From 0be1fecd7ee61b5a6d2b2e94b052b8a070b946ef Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 22 Oct 2012 10:44:55 +1100 Subject: md faulty: use disk_stack_limits() in: fe86cdce block: do not artificially constrain max_sectors for stacking drivers max_sectors defaults to UINT_MAX. md faulty wasn't using disk_stack_limits(), so inherited this large value as well. This triggered a bug in XFS when stressed over md_faulty, when a very large bio_alloc() failed. That was on an older kernel, and I can't reproduce exactly the same thing upstream, but I think the fix is appropriate in any case. Thanks to Mike Snitzer for pointing out the problem. Signed-off-by: Eric Sandeen Signed-off-by: NeilBrown diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 45135f6..5e7dc77 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -315,8 +315,11 @@ static int run(struct mddev *mddev) } conf->nfaults = 0; - rdev_for_each(rdev, mddev) + rdev_for_each(rdev, mddev) { conf->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); + } md_set_array_sectors(mddev, faulty_size(mddev, 0, 0)); mddev->private = conf; -- cgit v0.10.2 From 9a4da2cd99e4edfee1e48c5e2b4928eaefb56006 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Fri, 19 Oct 2012 02:09:53 +0000 Subject: cxgb4: Remove unnecessary #ifdef condition This patch also fixes the build failure caused due to removal of #ifdef CONFIG_CHELSIO_T4_OFFLOAD condition Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index a4da893..378988b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -251,6 +251,8 @@ struct adapter_params { unsigned char rev; /* chip revision */ unsigned char offload; + unsigned char bypass; + unsigned int ofldq_wr_cred; }; @@ -642,6 +644,23 @@ extern int dbfifo_int_thresh; #define for_each_port(adapter, iter) \ for (iter = 0; iter < (adapter)->params.nports; ++iter) +static inline int is_bypass(struct adapter *adap) +{ + return adap->params.bypass; +} + +static inline int is_bypass_device(int device) +{ + /* this should be set based upon device capabilities */ + switch (device) { + case 0x440b: + case 0x440c: + return 1; + default: + return 0; + } +} + static inline unsigned int core_ticks_per_usec(const struct adapter *adap) { return adap->params.vpd.cclk / 1000; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 604f4f8..c1cde11 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3513,18 +3513,6 @@ static int adap_init0_no_config(struct adapter *adapter, int reset) if (ret < 0) goto bye; -#ifndef CONFIG_CHELSIO_T4_OFFLOAD - /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.ofldcaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; -#endif - if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { if (!vf_acls) caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); @@ -3745,6 +3733,7 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; + struct fw_caps_config_cmd caps_cmd; int reset = 1, j; /* @@ -3898,6 +3887,9 @@ static int adap_init0(struct adapter *adap) goto bye; } + if (is_bypass_device(adap->pdev->device)) + adap->params.bypass = 1; + /* * Grab some of our basic fundamental operating parameters. */ @@ -3940,13 +3932,12 @@ static int adap_init0(struct adapter *adap) adap->tids.aftid_end = val[1]; } -#ifdef CONFIG_CHELSIO_T4_OFFLOAD /* * Get device capabilities so we can determine what resources we need * to manage. */ memset(&caps_cmd, 0, sizeof(caps_cmd)); - caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | FW_CMD_REQUEST | FW_CMD_READ); caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), @@ -3991,15 +3982,6 @@ static int adap_init0(struct adapter *adap) adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; - params[0] = FW_PARAM_PFVF(ETHOFLD_START); - params[1] = FW_PARAM_PFVF(ETHOFLD_END); - ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, - params, val); - if ((val[0] != val[1]) && (ret >= 0)) { - adap->tids.uotid_base = val[0]; - adap->tids.nuotids = val[1] - val[0] + 1; - } - adap->params.offload = 1; } if (caps_cmd.rdmacaps) { @@ -4048,7 +4030,6 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV -#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ /* * These are finalized by FW initialization, load their values now. diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index 1b899fe..39bec73 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -102,6 +102,9 @@ struct tid_info { unsigned int ftid_base; unsigned int aftid_base; unsigned int aftid_end; + /* Server filter region */ + unsigned int sftid_base; + unsigned int nsftids; spinlock_t atid_lock ____cacheline_aligned_in_smp; union aopen_entry *afree; -- cgit v0.10.2 From 3a531260a14631ae8d231279b8738884bf808e7b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 20 Oct 2012 12:39:03 -0300 Subject: perf trace: Validate syscall id before growing syscall table In some cases the ID for a syscall read thru the raw_syscalls tracepoint is bogus, still needs to be investigated why, but to make the tool more robust first try to resolve the ID to a name via libaudit and if it fails, don't grow the table. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-0lsokw3xor7c4ijo45u6bauh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index dec8ced..83c6515 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -56,6 +56,10 @@ static int trace__read_syscall_info(struct trace *trace, int id) { char tp_name[128]; struct syscall *sc; + const char *name = audit_syscall_to_name(id, trace->audit_machine); + + if (name == NULL) + return -1; if (id > trace->syscalls.max) { struct syscall *nsyscalls = realloc(trace->syscalls.table, (id + 1) * sizeof(*sc)); @@ -75,11 +79,8 @@ static int trace__read_syscall_info(struct trace *trace, int id) } sc = trace->syscalls.table + id; - sc->name = audit_syscall_to_name(id, trace->audit_machine); - if (sc->name == NULL) - return -1; - - sc->fmt = syscall_fmt__find(sc->name); + sc->name = name; + sc->fmt = syscall_fmt__find(sc->name); snprintf(tp_name, sizeof(tp_name), "sys_enter_%s", sc->name); sc->tp_format = event_format__new("syscalls", tp_name); -- cgit v0.10.2 From fc551f8d4427150da1ee7cbb0f53525c49ef4bca Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 20 Oct 2012 13:08:46 -0300 Subject: perf trace: Check if sample raw_data field is set Sometimes we're segfaulting because we were expecting that the perf_sample.raw_data field was set as requested, but in some cases that needs further investigation, that field can be NULL, leading to segfaults. Make the tool more robust by checking that before calling any per event handlers that may try to use that field. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-g1fmodl6ys4lq8honbj1igoi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index 83c6515..7aaee39 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -268,6 +268,13 @@ again: if (evlist->threads->map[0] == -1 || evlist->threads->nr > 1) printf("%d ", sample.tid); + if (sample.raw_data == NULL) { + printf("%s sample with no payload for tid: %d, cpu %d, raw_size=%d, skipping...\n", + perf_evsel__name(evsel), sample.tid, + sample.cpu, sample.raw_size); + continue; + } + handler = evsel->handler.func; handler(trace, evsel, &sample); } -- cgit v0.10.2 From 2c14575f99ddd5b8384c5b460687ceba181900d8 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 5 Oct 2012 12:26:32 +0200 Subject: drm/nouveau: handle same-fb page flips It's questionable use case, but weston/wayland already relies on this behaviour, and other drivers don't care about it, so it's a matter of compatibility. Without it, process invoking such page flip hangs in unkillable state, trying to reserve the same buffer twice. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 61f370d..53ee303 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -530,9 +530,11 @@ nouveau_page_flip_reserve(struct nouveau_bo *old_bo, if (ret) goto fail; - ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0); - if (ret) - goto fail_unreserve; + if (likely(old_bo != new_bo)) { + ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0); + if (ret) + goto fail_unreserve; + } return 0; @@ -551,8 +553,10 @@ nouveau_page_flip_unreserve(struct nouveau_bo *old_bo, nouveau_bo_fence(new_bo, fence); ttm_bo_unreserve(&new_bo->bo); - nouveau_bo_fence(old_bo, fence); - ttm_bo_unreserve(&old_bo->bo); + if (likely(old_bo != new_bo)) { + nouveau_bo_fence(old_bo, fence); + ttm_bo_unreserve(&old_bo->bo); + } nouveau_bo_unpin(old_bo); } -- cgit v0.10.2 From 90e2889c4e24e2bde8f226402b46c66e18162860 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Sat, 20 Oct 2012 11:03:36 +0200 Subject: drm/nouveau/bios: improve error handling when reading the vbios from ACPI Reported-by: Pawel Sikora Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index dcb5c2b..f65bfed 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -188,8 +188,10 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) int ret, cnt, i; u8 data[3]; - if (!nouveau_acpi_rom_supported(pdev)) + if (!nouveau_acpi_rom_supported(pdev)) { + bios->data = NULL; return; + } bios->size = 0; if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3) -- cgit v0.10.2 From 92485cef52c2de0f98efdf527ea39cef2b9fc416 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 22 Oct 2012 00:20:32 +0200 Subject: drm/nouveau: fix nouveau_mm/nouveau_mm_node leak v2: use already existing parent Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/core/gpuobj.c b/drivers/gpu/drm/nouveau/core/core/gpuobj.c index 1f34549..70586fd 100644 --- a/drivers/gpu/drm/nouveau/core/core/gpuobj.c +++ b/drivers/gpu/drm/nouveau/core/core/gpuobj.c @@ -39,6 +39,11 @@ nouveau_gpuobj_destroy(struct nouveau_gpuobj *gpuobj) nv_wo32(gpuobj, i, 0x00000000); } + if (gpuobj->node) { + nouveau_mm_free(&nv_gpuobj(gpuobj->parent)->heap, + &gpuobj->node); + } + if (gpuobj->heap.block_size) nouveau_mm_fini(&gpuobj->heap); -- cgit v0.10.2 From 0bab097a9b18d7ad1a65c9263b3f896fc1f4b6ff Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 22 Oct 2012 00:21:39 +0200 Subject: drm/nouveau: warn when trying to free mm which is still in use Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/core/mm.c b/drivers/gpu/drm/nouveau/core/core/mm.c index bfddf87..4d62064 100644 --- a/drivers/gpu/drm/nouveau/core/core/mm.c +++ b/drivers/gpu/drm/nouveau/core/core/mm.c @@ -236,7 +236,7 @@ nouveau_mm_fini(struct nouveau_mm *mm) int nodes = 0; list_for_each_entry(node, &mm->nodes, nl_entry) { - if (nodes++ == mm->heap_nodes) + if (WARN_ON(nodes++ == mm->heap_nodes)) return -EBUSY; } -- cgit v0.10.2 From 00e4845bad84689fbaacc86bc54a0b99d5d3c1fc Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 22 Oct 2012 09:59:20 +1000 Subject: drm/nouveau: validate vbios size Without checking, we could detect vbios size as 0, allocate 0-byte array (kmalloc returns invalid pointer for such allocation) and crash in nouveau_bios_score while checking for vbios signature. Reported-by: Heinz Diehl Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index f65bfed..3a84ad4 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -72,7 +72,7 @@ nouveau_bios_shadow_of(struct nouveau_bios *bios) } data = of_get_property(dn, "NVDA,BMP", &size); - if (data) { + if (data && size) { bios->size = size; bios->data = kmalloc(bios->size, GFP_KERNEL); if (bios->data) @@ -104,6 +104,9 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios) goto out; bios->size = nv_rd08(bios, 0x700002) * 512; + if (!bios->size) + goto out; + bios->data = kmalloc(bios->size, GFP_KERNEL); if (bios->data) { for (i = 0; i < bios->size; i++) @@ -155,6 +158,9 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios) /* read entire bios image to system memory */ bios->size = nv_rd08(bios, 0x300002) * 512; + if (!bios->size) + goto out; + bios->data = kmalloc(bios->size, GFP_KERNEL); if (bios->data) { for (i = 0; i < bios->size; i++) @@ -196,6 +202,8 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) bios->size = 0; if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3) bios->size = data[2] * 512; + if (!bios->size) + return; bios->data = kmalloc(bios->size, GFP_KERNEL); for (i = 0; bios->data && i < bios->size; i += cnt) { @@ -231,12 +239,14 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios) static int nouveau_bios_score(struct nouveau_bios *bios, const bool writeable) { - if (!bios->data || bios->data[0] != 0x55 || bios->data[1] != 0xAA) { + if (bios->size < 3 || !bios->data || bios->data[0] != 0x55 || + bios->data[1] != 0xAA) { nv_info(bios, "... signature not found\n"); return 0; } - if (nvbios_checksum(bios->data, bios->data[2] * 512)) { + if (nvbios_checksum(bios->data, + min_t(u32, bios->data[2] * 512, bios->size))) { nv_info(bios, "... checksum invalid\n"); /* if a ro image is somewhat bad, it's probably all rubbish */ return writeable ? 2 : 1; -- cgit v0.10.2 From 8dee001d98813c4cfa0be92ae3da7cabdc954c63 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 14:46:32 +0530 Subject: extcon: Remove duplicate inclusion of extcon.h header file extcon.h header file was included twice. Signed-off-by: Sachin Kamat Signed-off-by: Sachin Kamat Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 3cc152e..71d3ab7 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 3cafbd4e5005dbef78b32f2e0fe3ab00a955c6c1 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Fri, 31 Aug 2012 14:00:19 +0530 Subject: extcon-max8997: remove usage of ret in max8997_muic_handle_charger_type_detach actually we can do returns with error or success with out ret in this function, so remove the ret variable, and reduce a very little (4byte) space on stack of this function Signed-off-by: Devendra Naga Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index ef9090a..77b66b0 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -271,8 +271,6 @@ out: static int max8997_muic_handle_charger_type_detach( struct max8997_muic_info *info) { - int ret = 0; - switch (info->pre_charger_type) { case MAX8997_CHARGER_TYPE_USB: extcon_set_cable_state(info->edev, "USB", false); @@ -290,11 +288,11 @@ static int max8997_muic_handle_charger_type_detach( extcon_set_cable_state(info->edev, "Fast-charger", false); break; default: - ret = -EINVAL; + return -EINVAL; break; } - return ret; + return 0; } static int max8997_muic_handle_charger_type(struct max8997_muic_info *info, -- cgit v0.10.2 From 0cf6ad8a18f7f7bdbb81975188d9e0656ef277dd Mon Sep 17 00:00:00 2001 From: anish kumar Date: Thu, 30 Aug 2012 00:35:09 +0530 Subject: extcon: standard cable names definition and declaration changed With this change now individual drivers can use standard cable names as below: static const char *arizona_cable[] = { extcon_cable_name[EXTCON_USB], extcon_cable_name[EXTCON_USB_HOST], "CUSTOM_CABLE" NULL, } Signed-off-by: anish kumar Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 946a318..1e1a3f1 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -41,7 +41,7 @@ * every single port-type of the following cable names. Please choose cable * names that are actually used in your extcon device. */ -const char *extcon_cable_name[] = { +const char extcon_cable_name[][CABLE_NAME_MAX + 1] = { [EXTCON_USB] = "USB", [EXTCON_USB_HOST] = "USB-Host", [EXTCON_TA] = "TA", @@ -62,8 +62,6 @@ const char *extcon_cable_name[] = { [EXTCON_VIDEO_IN] = "Video-in", [EXTCON_VIDEO_OUT] = "Video-out", [EXTCON_MECHANICAL] = "Mechanical", - - NULL, }; static struct class *extcon_class; diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 7443a56..2c26c14 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -68,7 +68,7 @@ enum extcon_cable_name { EXTCON_VIDEO_OUT, EXTCON_MECHANICAL, }; -extern const char *extcon_cable_name[]; +extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; struct extcon_cable; -- cgit v0.10.2 From 28c0ada62d39eaafef03d88a4e6f4c5bcb6e1b6c Mon Sep 17 00:00:00 2001 From: anish kumar Date: Thu, 30 Aug 2012 00:35:10 +0530 Subject: extcon: optimising the check_mutually_exclusive function Rather than re-inventing the wheel we can use the hamming function to calculate the number of bits set to check for violation of exclusivity. Signed-off-by: anish kumar Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 1e1a3f1..1ce76a8 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -89,17 +89,13 @@ static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state) return 0; for (i = 0; edev->mutually_exclusive[i]; i++) { - int count = 0, j; + int weight; u32 correspondants = new_state & edev->mutually_exclusive[i]; - u32 exp = 1; - - for (j = 0; j < 32; j++) { - if (exp & correspondants) - count++; - if (count > 1) - return i + 1; - exp <<= 1; - } + + /* calculate the total number of bits set */ + weight = hweight32(correspondants); + if (weight > 1) + return i + 1; } return 0; -- cgit v0.10.2 From d1626a965141b1e600efad29947b6c36dab183c3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Oct 2012 10:08:19 +1000 Subject: drm/nouveau/bios: fetch full 4KiB block to determine ACPI ROM image size Buggy firmware leads to bad things happening otherwise.. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index 3a84ad4..70ca7d5a 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -192,7 +192,6 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) { struct pci_dev *pdev = nv_device(bios)->pdev; int ret, cnt, i; - u8 data[3]; if (!nouveau_acpi_rom_supported(pdev)) { bios->data = NULL; @@ -200,8 +199,13 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios) } bios->size = 0; - if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3) - bios->size = data[2] * 512; + bios->data = kmalloc(4096, GFP_KERNEL); + if (bios->data) { + if (nouveau_acpi_get_bios_chunk(bios->data, 0, 4096) == 4096) + bios->size = bios->data[2] * 512; + kfree(bios->data); + } + if (!bios->size) return; -- cgit v0.10.2 From 4bf24c02150a4c5e31d397342b1157496f1881ee Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Oct 2012 10:56:07 +1000 Subject: drm/nv41/vm: don't init hw pciegart on boards with agp bridge Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c index 0203e1e..49050d9 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c +++ b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c @@ -92,7 +92,8 @@ nv41_vmmgr_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nv04_vmmgr_priv *priv; int ret; - if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) { + if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) || + !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) { return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass, data, size, pobject); } diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c b/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c index 0ac18d0..aa81314 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c +++ b/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c @@ -163,7 +163,8 @@ nv44_vmmgr_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nv04_vmmgr_priv *priv; int ret; - if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) { + if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) || + !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) { return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass, data, size, pobject); } -- cgit v0.10.2 From 2c25b7399570ebdcf737c5af67c9d26a1771c002 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Oct 2012 13:40:36 +1000 Subject: drm/nouveau/fb: fix reporting of memory type on GF8+ IGPs Purely a cosmetic issue at this point. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 42d7539..27fb1af 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -237,6 +237,7 @@ nv50_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine, return ret; priv->base.ram.stolen = (u64)nv_rd32(priv, 0x100e10) << 12; + priv->base.ram.type = NV_MEM_TYPE_STOLEN; break; default: ret = nouveau_mm_init(&priv->base.vram, rsvd_head, size, -- cgit v0.10.2 From 79f1ba49569e5aec919b653c55b03274c2331701 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 22 Oct 2012 00:34:32 -0400 Subject: ext4: Checksum the block bitmap properly with bigalloc enabled In mke2fs, we only checksum the whole bitmap block and it is right. While in the kernel, we use EXT4_BLOCKS_PER_GROUP to indicate the size of the checksumed bitmap which is wrong when we enable bigalloc. The right size should be EXT4_CLUSTERS_PER_GROUP and this patch fixes it. Also as every caller of ext4_block_bitmap_csum_set and ext4_block_bitmap_csum_verify pass in EXT4_BLOCKS_PER_GROUP(sb)/8, we'd better removes this parameter and sets it in the function itself. Signed-off-by: Tao Ma Signed-off-by: "Theodore Ts'o" Reviewed-by: Lukas Czerner Cc: stable@vger.kernel.org diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 1b50890..cf18217 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -174,8 +174,7 @@ void ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, ext4_free_inodes_set(sb, gdp, 0); ext4_itable_unused_set(sb, gdp, 0); memset(bh->b_data, 0xff, sb->s_blocksize); - ext4_block_bitmap_csum_set(sb, block_group, gdp, bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, block_group, gdp, bh); return; } memset(bh->b_data, 0, sb->s_blocksize); @@ -212,8 +211,7 @@ void ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, */ ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group), sb->s_blocksize * 8, bh->b_data); - ext4_block_bitmap_csum_set(sb, block_group, gdp, bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, block_group, gdp, bh); ext4_group_desc_csum_set(sb, block_group, gdp); } @@ -350,7 +348,7 @@ void ext4_validate_block_bitmap(struct super_block *sb, return; } if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group, - desc, bh, EXT4_BLOCKS_PER_GROUP(sb) / 8))) { + desc, bh))) { ext4_unlock_group(sb, block_group); ext4_error(sb, "bg %u: bad block bitmap checksum", block_group); return; diff --git a/fs/ext4/bitmap.c b/fs/ext4/bitmap.c index 5c2d181..3285aa5 100644 --- a/fs/ext4/bitmap.c +++ b/fs/ext4/bitmap.c @@ -58,11 +58,12 @@ void ext4_inode_bitmap_csum_set(struct super_block *sb, ext4_group_t group, int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, struct ext4_group_desc *gdp, - struct buffer_head *bh, int sz) + struct buffer_head *bh) { __u32 hi; __u32 provided, calculated; struct ext4_sb_info *sbi = EXT4_SB(sb); + int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8; if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) @@ -84,8 +85,9 @@ int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group, struct ext4_group_desc *gdp, - struct buffer_head *bh, int sz) + struct buffer_head *bh) { + int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8; __u32 csum; struct ext4_sb_info *sbi = EXT4_SB(sb); diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 78971cf..3c20de1 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1882,10 +1882,10 @@ int ext4_inode_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, struct buffer_head *bh, int sz); void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group, struct ext4_group_desc *gdp, - struct buffer_head *bh, int sz); + struct buffer_head *bh); int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, struct ext4_group_desc *gdp, - struct buffer_head *bh, int sz); + struct buffer_head *bh); /* balloc.c */ extern void ext4_validate_block_bitmap(struct super_block *sb, diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index fa36372..4facdd2 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -762,9 +762,7 @@ got: ext4_free_group_clusters_set(sb, gdp, ext4_free_clusters_after_init(sb, group, gdp)); ext4_block_bitmap_csum_set(sb, group, gdp, - block_bitmap_bh, - EXT4_BLOCKS_PER_GROUP(sb) / - 8); + block_bitmap_bh); ext4_group_desc_csum_set(sb, group, gdp); } ext4_unlock_group(sb, group); diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a415465..eb1e385 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2805,8 +2805,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, } len = ext4_free_group_clusters(sb, gdp) - ac->ac_b_ex.fe_len; ext4_free_group_clusters_set(sb, gdp, len); - ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh); ext4_group_desc_csum_set(sb, ac->ac_b_ex.fe_group, gdp); ext4_unlock_group(sb, ac->ac_b_ex.fe_group); @@ -4666,8 +4665,7 @@ do_more: ret = ext4_free_group_clusters(sb, gdp) + count_clusters; ext4_free_group_clusters_set(sb, gdp, ret); - ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh); ext4_group_desc_csum_set(sb, block_group, gdp); ext4_unlock_group(sb, block_group); percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters); @@ -4811,8 +4809,7 @@ int ext4_group_add_blocks(handle_t *handle, struct super_block *sb, mb_free_blocks(NULL, &e4b, bit, count); blk_free_count = blocks_freed + ext4_free_group_clusters(sb, desc); ext4_free_group_clusters_set(sb, desc, blk_free_count); - ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh); ext4_group_desc_csum_set(sb, block_group, desc); ext4_unlock_group(sb, block_group); percpu_counter_add(&sbi->s_freeclusters_counter, diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 7a75e10..47bf06a 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1212,8 +1212,7 @@ static int ext4_set_bitmap_checksums(struct super_block *sb, bh = ext4_get_bitmap(sb, group_data->block_bitmap); if (!bh) return -EIO; - ext4_block_bitmap_csum_set(sb, group, gdp, bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8); + ext4_block_bitmap_csum_set(sb, group, gdp, bh); brelse(bh); return 0; -- cgit v0.10.2 From 5e5a195ecc8cc0280d169d6da33c959df6336e9f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Oct 2012 14:10:16 +1000 Subject: drm/nouveau/clock: fix missing pll type/addr when matching default entry This issue is a regression from 70790f4f819875e8f390871fd15bbbf823f28e1b, and causes us to miss a special-case for C51 (NV4E) chipsets and return the wrong reference frequency for the VPLLs. Should fix fdo#56202 Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c index 5e5f4cd..f835501 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c @@ -157,11 +157,10 @@ pll_map_reg(struct nouveau_bios *bios, u32 reg, u32 *type, u8 *ver, u8 *len) while (map->reg) { if (map->reg == reg && *ver >= 0x20) { u16 addr = (data += hdr); + *type = map->type; while (cnt--) { - if (nv_ro32(bios, data) == map->reg) { - *type = map->type; + if (nv_ro32(bios, data) == map->reg) return data; - } data += *len; } return addr; @@ -200,11 +199,10 @@ pll_map_type(struct nouveau_bios *bios, u8 type, u32 *reg, u8 *ver, u8 *len) while (map->reg) { if (map->type == type && *ver >= 0x20) { u16 addr = (data += hdr); + *reg = map->reg; while (cnt--) { - if (nv_ro32(bios, data) == map->reg) { - *reg = map->reg; + if (nv_ro32(bios, data) == map->reg) return data; - } data += *len; } return addr; -- cgit v0.10.2 From 2f0157f13f42800aa3d9017ebb0fb80a65f7b2de Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 21 Oct 2012 17:57:19 -0700 Subject: char_dev: pin parent kobject In certain cases (for example when a cdev structure is embedded into another object whose lifetime is controlled by a separate kobject) it is beneficial to tie lifetime of another object to the lifetime of character device so that related object is not freed until after char_dev object is freed. To achieve this let's pin kobject's parent when doing cdev_add() and unpin when last reference to cdev structure is being released. Signed-off-by: Dmitry Torokhov Acked-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/fs/char_dev.c b/fs/char_dev.c index 3f152b9..afc2bb6 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -471,9 +471,19 @@ static int exact_lock(dev_t dev, void *data) */ int cdev_add(struct cdev *p, dev_t dev, unsigned count) { + int error; + p->dev = dev; p->count = count; - return kobj_map(cdev_map, dev, count, NULL, exact_match, exact_lock, p); + + error = kobj_map(cdev_map, dev, count, NULL, + exact_match, exact_lock, p); + if (error) + return error; + + kobject_get(p->kobj.parent); + + return 0; } static void cdev_unmap(dev_t dev, unsigned count) @@ -498,14 +508,20 @@ void cdev_del(struct cdev *p) static void cdev_default_release(struct kobject *kobj) { struct cdev *p = container_of(kobj, struct cdev, kobj); + struct kobject *parent = kobj->parent; + cdev_purge(p); + kobject_put(parent); } static void cdev_dynamic_release(struct kobject *kobj) { struct cdev *p = container_of(kobj, struct cdev, kobj); + struct kobject *parent = kobj->parent; + cdev_purge(p); kfree(p); + kobject_put(parent); } static struct kobj_type ktype_cdev_default = { -- cgit v0.10.2 From 4a215aade0baa0487d4644d7aef6f166c84c516e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 21 Oct 2012 17:57:20 -0700 Subject: Input: fix use-after-free introduced with dynamic minor changes Commit 7f8d4cad1e4e ("Input: extend the number of event (and other) devices") made evdev, joydev and mousedev to embed struct cdev into their respective structures representing input devices. Unfortunately character device structure may outlive the parent structure unless we do not set it up as parent of character device so that it will stay pinned until character device is freed. Also, now that parent structure is pinned while character device exists we do not need to pin and unpin it every time user opens or closes it. Reported-by: Dave Jones Signed-off-by: Dmitry Torokhov Acked-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 6ae2ac4..f0f8928 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -292,7 +292,6 @@ static int evdev_release(struct inode *inode, struct file *file) kfree(client); evdev_close_device(evdev); - put_device(&evdev->dev); return 0; } @@ -331,7 +330,6 @@ static int evdev_open(struct inode *inode, struct file *file) file->private_data = client; nonseekable_open(inode, file); - get_device(&evdev->dev); return 0; err_free_client: @@ -1001,6 +999,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, goto err_free_evdev; cdev_init(&evdev->cdev, &evdev_fops); + evdev->cdev.kobj.parent = &evdev->dev.kobj; error = cdev_add(&evdev->cdev, evdev->dev.devt, 1); if (error) goto err_unregister_handle; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index b62b589..f362883 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -243,7 +243,6 @@ static int joydev_release(struct inode *inode, struct file *file) kfree(client); joydev_close_device(joydev); - put_device(&joydev->dev); return 0; } @@ -270,7 +269,6 @@ static int joydev_open(struct inode *inode, struct file *file) file->private_data = client; nonseekable_open(inode, file); - get_device(&joydev->dev); return 0; err_free_client: @@ -858,6 +856,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, goto err_free_joydev; cdev_init(&joydev->cdev, &joydev_fops); + joydev->cdev.kobj.parent = &joydev->dev.kobj; error = cdev_add(&joydev->cdev, joydev->dev.devt, 1); if (error) goto err_unregister_handle; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index a1b4c37..8f02e3d 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -523,7 +523,6 @@ static int mousedev_release(struct inode *inode, struct file *file) kfree(client); mousedev_close_device(mousedev); - put_device(&mousedev->dev); return 0; } @@ -558,7 +557,6 @@ static int mousedev_open(struct inode *inode, struct file *file) file->private_data = client; nonseekable_open(inode, file); - get_device(&mousedev->dev); return 0; err_free_client: @@ -892,6 +890,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev, } cdev_init(&mousedev->cdev, &mousedev_fops); + mousedev->cdev.kobj.parent = &mousedev->dev.kobj; error = cdev_add(&mousedev->cdev, mousedev->dev.devt, 1); if (error) goto err_unregister_handle; -- cgit v0.10.2 From 0390c8835690506802fd5d54ea5444f0b9b1708b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 20 Oct 2012 18:59:31 -0700 Subject: module_signing: fix printk format warning Fix the warning: kernel/module_signing.c:195:2: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t' by using the proper 'z' modifier for printing a size_t. Signed-off-by: Randy Dunlap Cc: David Howells Signed-off-by: Linus Torvalds diff --git a/kernel/module_signing.c b/kernel/module_signing.c index d492a23..ea1b1df 100644 --- a/kernel/module_signing.c +++ b/kernel/module_signing.c @@ -192,7 +192,7 @@ int mod_verify_sig(const void *mod, unsigned long *_modlen) size_t modlen = *_modlen, sig_len; int ret; - pr_devel("==>%s(,%lu)\n", __func__, modlen); + pr_devel("==>%s(,%zu)\n", __func__, modlen); if (modlen <= sizeof(ms)) return -EBADMSG; -- cgit v0.10.2 From bbb5823cf742a7e955f35c7d891e4e936944c33a Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Tue, 9 Oct 2012 13:00:47 +0000 Subject: netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d51) we should properly match the nexthop when destinations are directly connected because rt_gateway can be 0. The rt_gateway checks in H.323 helper try to avoid the creation of an unnecessary expectation in this call-forwarding case: http://people.netfilter.org/zhaojingmin/h323_conntrack_nat_helper/#_Toc133598073 However, the existing code fails to avoid that in many cases, see this thread: http://marc.info/?l=linux-netdev&m=135043175028620&w=2 It seems it is not trivial to know from the kernel if two hosts have to go through the firewall to communicate each other, which is the main point of the call-forwarding filter code to avoid creating unnecessary expectations. So this patch just gets things the way they were as before commit f8126f1d51. Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 1b30b0d..962795e 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -753,7 +753,8 @@ static int callforward_do_filter(const union nf_inet_addr *src, flowi4_to_flowi(&fl1), false)) { if (!afinfo->route(&init_net, (struct dst_entry **)&rt2, flowi4_to_flowi(&fl2), false)) { - if (rt1->rt_gateway == rt2->rt_gateway && + if (rt_nexthop(rt1, fl1.daddr) == + rt_nexthop(rt2, fl2.daddr) && rt1->dst.dev == rt2->dst.dev) ret = 1; dst_release(&rt2->dst); -- cgit v0.10.2 From 21b3de881b38a84002c07b1b4bfb91892644e83f Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Mon, 22 Oct 2012 17:05:53 +0400 Subject: ALSA: als3000: check for the kzalloc return value Signed-off-by: Denis Kirjanov Signed-off-by: Takashi Iwai diff --git a/sound/pci/als300.c b/sound/pci/als300.c index 00f157a..5af3cb6 100644 --- a/sound/pci/als300.c +++ b/sound/pci/als300.c @@ -394,6 +394,8 @@ static int snd_als300_playback_open(struct snd_pcm_substream *substream) struct snd_als300_substream_data *data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; snd_als300_dbgcallenter(); chip->playback_substream = substream; runtime->hw = snd_als300_playback_hw; @@ -425,6 +427,8 @@ static int snd_als300_capture_open(struct snd_pcm_substream *substream) struct snd_als300_substream_data *data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; snd_als300_dbgcallenter(); chip->capture_substream = substream; runtime->hw = snd_als300_capture_hw; -- cgit v0.10.2 From 5f40b909728ad784eb43aa309d3c4e9bdf050781 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 19 Oct 2012 17:53:01 +0100 Subject: ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count When booting a secondary CPU, the primary CPU hands two sets of page tables via the secondary_data struct: (1) swapper_pg_dir: a normal, cacheable, shared (if SMP) mapping of the kernel image (i.e. the tables used by init_mm). (2) idmap_pgd: an uncached mapping of the .idmap.text ELF section. The idmap is generally used when enabling and disabling the MMU, which includes early CPU boot. In this case, the secondary CPU switches to swapper as soon as it enters C code: struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); cpu_switch_mm(mm->pgd, mm); This causes a problem on ARMv7, where the identity mapping is treated as strongly-ordered leading to architecturally UNPREDICTABLE behaviour of exclusive accesses, such as those used by atomic_inc. This patch re-orders the secondary_start_kernel function so that we switch to swapper before performing any exclusive accesses. Cc: Cc: David McKay Reported-by: Gilles Chanteperdrix Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754d..fbc8b26 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); -- cgit v0.10.2 From ad17a26e2273d18d27fcbb4a8d8a341ebb2d721f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 22 Oct 2012 10:17:24 +0100 Subject: ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode The periodic mode is currently calculated by a simple division but we should pay more attention to our integer arithmetics. Also delete a comment that does not make any sense. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f9069..b22d700 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ -- cgit v0.10.2 From 670ab5d21c7e168c89a36fdd2c69fb7af63d35a1 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 22 Oct 2012 16:12:23 +0900 Subject: perf help: Fix --help for builtins It seems that commit cc5848213329 ("perf help: Remove use of die and handle errors") caused the problem - it changed the initial value of 'help_format' from HELP_FORMAT_MAN to HELP_FORMAT_NONE. This broke the --help option for all builtins, that would produce no output, while 'man perf-top' would work it MANPATH is properly setup. Reported-by: Stephane Eranian Signed-off-by: Namhyung Kim Tested-by: David Ahern Acked-by: David Ahern Cc: David Ahern Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/87r4orj7zc.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c index 411ee56..178b88a 100644 --- a/tools/perf/builtin-help.c +++ b/tools/perf/builtin-help.c @@ -414,7 +414,7 @@ static int show_html_page(const char *perf_cmd) int cmd_help(int argc, const char **argv, const char *prefix __maybe_unused) { bool show_all = false; - enum help_format help_format = HELP_FORMAT_NONE; + enum help_format help_format = HELP_FORMAT_MAN; struct option builtin_help_options[] = { OPT_BOOLEAN('a', "all", &show_all, "print all available commands"), OPT_SET_UINT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN), -- cgit v0.10.2 From 373304fe10fc46e68815c7116709ad292695dfd1 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 9 Oct 2012 12:01:01 +0800 Subject: firmware loader: cancel uncache work before caching firmware Under 'Opportunistic sleep' situation, system sleep might be triggered very frequently, so the uncahce work may not be completed before caching firmware during next suspend. This patch cancels the uncache work before caching firmware to fix the problem above. Also this patch optimizes the cacheing firmware mechanism a bit by only storing one firmware cache entry for one firmware image. So if the firmware is still cached during suspend, it doesn't need to be loaded from user space any more. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 8154145..d06a8d0 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -1142,17 +1142,27 @@ exit: return fce; } -static int fw_cache_piggyback_on_request(const char *name) +static int __fw_entry_found(const char *name) { struct firmware_cache *fwc = &fw_cache; struct fw_cache_entry *fce; - int ret = 0; - spin_lock(&fwc->name_lock); list_for_each_entry(fce, &fwc->fw_names, list) { if (!strcmp(fce->name, name)) - goto found; + return 1; } + return 0; +} + +static int fw_cache_piggyback_on_request(const char *name) +{ + struct firmware_cache *fwc = &fw_cache; + struct fw_cache_entry *fce; + int ret = 0; + + spin_lock(&fwc->name_lock); + if (__fw_entry_found(name)) + goto found; fce = alloc_fw_cache_entry(name); if (fce) { @@ -1229,11 +1239,19 @@ static void dev_cache_fw_image(struct device *dev, void *data) list_del(&fce->list); spin_lock(&fwc->name_lock); - fwc->cnt++; - list_add(&fce->list, &fwc->fw_names); + /* only one cache entry for one firmware */ + if (!__fw_entry_found(fce->name)) { + fwc->cnt++; + list_add(&fce->list, &fwc->fw_names); + } else { + free_fw_cache_entry(fce); + fce = NULL; + } spin_unlock(&fwc->name_lock); - async_schedule(__async_dev_cache_fw_image, (void *)fce); + if (fce) + async_schedule(__async_dev_cache_fw_image, + (void *)fce); } } @@ -1275,6 +1293,9 @@ static void device_cache_fw_images(void) pr_debug("%s\n", __func__); + /* cancel uncache work */ + cancel_delayed_work_sync(&fwc->work); + /* * use small loading timeout for caching devices' firmware * because all these firmware images have been loaded -- cgit v0.10.2 From 253c9240ee09fd2a05d315ea44ac037a893d8981 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 9 Oct 2012 12:01:02 +0800 Subject: firmware loader: fix one reqeust_firmware race Several loading requests may be pending on one same firmware buf, and this patch moves fw_map_pages_buf() before complete_all(&fw_buf->completion) and let all requests see the mapped 'buf->data' once the loading is completed. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index d06a8d0..f288251 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -423,6 +423,18 @@ static void firmware_free_data(const struct firmware *fw) #ifndef PAGE_KERNEL_RO #define PAGE_KERNEL_RO PAGE_KERNEL #endif + +/* one pages buffer should be mapped/unmapped only once */ +static int fw_map_pages_buf(struct firmware_buf *buf) +{ + if (buf->data) + vunmap(buf->data); + buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO); + if (!buf->data) + return -ENOMEM; + return 0; +} + /** * firmware_loading_store - set value in the 'loading' control file * @dev: device pointer @@ -467,6 +479,14 @@ static ssize_t firmware_loading_store(struct device *dev, if (test_bit(FW_STATUS_LOADING, &fw_buf->status)) { set_bit(FW_STATUS_DONE, &fw_buf->status); clear_bit(FW_STATUS_LOADING, &fw_buf->status); + + /* + * Several loading requests may be pending on + * one same firmware buf, so let all requests + * see the mapped 'buf->data' once the loading + * is completed. + * */ + fw_map_pages_buf(fw_buf); complete_all(&fw_buf->completion); break; } @@ -670,15 +690,6 @@ exit: return fw_priv; } -/* one pages buffer is mapped/unmapped only once */ -static int fw_map_pages_buf(struct firmware_buf *buf) -{ - buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO); - if (!buf->data) - return -ENOMEM; - return 0; -} - /* store the pages buffer info firmware from buf */ static void fw_set_page_data(struct firmware_buf *buf, struct firmware *fw) { @@ -884,9 +895,6 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, if (!retval && f_dev->parent) fw_add_devm_name(f_dev->parent, buf->fw_id); - if (!retval) - retval = fw_map_pages_buf(buf); - /* * After caching firmware image is started, let it piggyback * on request firmware. -- cgit v0.10.2 From 746058f4304343507e48d39f80d7a3b0d8550e3a Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 9 Oct 2012 12:01:03 +0800 Subject: firmware loader: let direct loading back on 'firmware_buf' Firstly 'firmware_buf' is introduced to make all loading requests to share one firmware kernel buffer, so firmware_buf should be used in direct loading for saving memory and speedup firmware loading. Secondly, the commit below abb139e75c2cdbb955e840d6331cb5863e409d0e(firmware:teach the kernel to load firmware files directly from the filesystem) introduces direct loading for fixing udev regression, but it bypasses the firmware cache meachnism, so this patch enables caching firmware for direct loading case since it is still needed to solve drivers' dependency during system resume. Cc: Linus Torvalds Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index f288251..a095d84 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -36,68 +36,6 @@ MODULE_AUTHOR("Manuel Estrada Sainz"); MODULE_DESCRIPTION("Multi purpose firmware loading support"); MODULE_LICENSE("GPL"); -static const char *fw_path[] = { - "/lib/firmware/updates/" UTS_RELEASE, - "/lib/firmware/updates", - "/lib/firmware/" UTS_RELEASE, - "/lib/firmware" -}; - -/* Don't inline this: 'struct kstat' is biggish */ -static noinline long fw_file_size(struct file *file) -{ - struct kstat st; - if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st)) - return -1; - if (!S_ISREG(st.mode)) - return -1; - if (st.size != (long)st.size) - return -1; - return st.size; -} - -static bool fw_read_file_contents(struct file *file, struct firmware *fw) -{ - long size; - char *buf; - - size = fw_file_size(file); - if (size < 0) - return false; - buf = vmalloc(size); - if (!buf) - return false; - if (kernel_read(file, 0, buf, size) != size) { - vfree(buf); - return false; - } - fw->data = buf; - fw->size = size; - return true; -} - -static bool fw_get_filesystem_firmware(struct firmware *fw, const char *name) -{ - int i; - bool success = false; - char *path = __getname(); - - for (i = 0; i < ARRAY_SIZE(fw_path); i++) { - struct file *file; - snprintf(path, PATH_MAX, "%s/%s", fw_path[i], name); - - file = filp_open(path, O_RDONLY, 0); - if (IS_ERR(file)) - continue; - success = fw_read_file_contents(file, fw); - fput(file); - if (success) - break; - } - __putname(path); - return success; -} - /* Builtin firmware support */ #ifdef CONFIG_FW_LOADER @@ -150,6 +88,11 @@ enum { FW_STATUS_ABORT, }; +enum fw_buf_fmt { + VMALLOC_BUF, /* used in direct loading */ + PAGE_BUF, /* used in loading via userspace */ +}; + static int loading_timeout = 60; /* In seconds */ static inline long firmware_loading_timeout(void) @@ -187,6 +130,7 @@ struct firmware_buf { struct completion completion; struct firmware_cache *fwc; unsigned long status; + enum fw_buf_fmt fmt; void *data; size_t size; struct page **pages; @@ -240,6 +184,7 @@ static struct firmware_buf *__allocate_fw_buf(const char *fw_name, strcpy(buf->fw_id, fw_name); buf->fwc = fwc; init_completion(&buf->completion); + buf->fmt = VMALLOC_BUF; pr_debug("%s: fw-%s buf=%p\n", __func__, fw_name, buf); @@ -307,10 +252,14 @@ static void __fw_free_buf(struct kref *ref) list_del(&buf->list); spin_unlock(&fwc->lock); - vunmap(buf->data); - for (i = 0; i < buf->nr_pages; i++) - __free_page(buf->pages[i]); - kfree(buf->pages); + + if (buf->fmt == PAGE_BUF) { + vunmap(buf->data); + for (i = 0; i < buf->nr_pages; i++) + __free_page(buf->pages[i]); + kfree(buf->pages); + } else + vfree(buf->data); kfree(buf); } @@ -319,6 +268,69 @@ static void fw_free_buf(struct firmware_buf *buf) kref_put(&buf->ref, __fw_free_buf); } +/* direct firmware loading support */ +static const char *fw_path[] = { + "/lib/firmware/updates/" UTS_RELEASE, + "/lib/firmware/updates", + "/lib/firmware/" UTS_RELEASE, + "/lib/firmware" +}; + +/* Don't inline this: 'struct kstat' is biggish */ +static noinline long fw_file_size(struct file *file) +{ + struct kstat st; + if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st)) + return -1; + if (!S_ISREG(st.mode)) + return -1; + if (st.size != (long)st.size) + return -1; + return st.size; +} + +static bool fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf) +{ + long size; + char *buf; + + size = fw_file_size(file); + if (size < 0) + return false; + buf = vmalloc(size); + if (!buf) + return false; + if (kernel_read(file, 0, buf, size) != size) { + vfree(buf); + return false; + } + fw_buf->data = buf; + fw_buf->size = size; + return true; +} + +static bool fw_get_filesystem_firmware(struct firmware_buf *buf) +{ + int i; + bool success = false; + char *path = __getname(); + + for (i = 0; i < ARRAY_SIZE(fw_path); i++) { + struct file *file; + snprintf(path, PATH_MAX, "%s/%s", fw_path[i], buf->fw_id); + + file = filp_open(path, O_RDONLY, 0); + if (IS_ERR(file)) + continue; + success = fw_read_file_contents(file, buf); + fput(file); + if (success) + break; + } + __putname(path); + return success; +} + static struct firmware_priv *to_firmware_priv(struct device *dev) { return container_of(dev, struct firmware_priv, dev); @@ -427,6 +439,9 @@ static void firmware_free_data(const struct firmware *fw) /* one pages buffer should be mapped/unmapped only once */ static int fw_map_pages_buf(struct firmware_buf *buf) { + if (buf->fmt != PAGE_BUF) + return 0; + if (buf->data) vunmap(buf->data); buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO); @@ -789,11 +804,6 @@ _request_firmware_prepare(const struct firmware **firmware_p, const char *name, return NULL; } - if (fw_get_filesystem_firmware(firmware, name)) { - dev_dbg(device, "firmware: direct-loading firmware %s\n", name); - return NULL; - } - ret = fw_lookup_and_allocate_buf(name, &fw_cache, &buf); if (!ret) fw_priv = fw_create_instance(firmware, name, device, @@ -843,6 +853,21 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, struct device *f_dev = &fw_priv->dev; struct firmware_buf *buf = fw_priv->buf; struct firmware_cache *fwc = &fw_cache; + int direct_load = 0; + + /* try direct loading from fs first */ + if (fw_get_filesystem_firmware(buf)) { + dev_dbg(f_dev->parent, "firmware: direct-loading" + " firmware %s\n", buf->fw_id); + + set_bit(FW_STATUS_DONE, &buf->status); + complete_all(&buf->completion); + direct_load = 1; + goto handle_fw; + } + + /* fall back on userspace loading */ + buf->fmt = PAGE_BUF; dev_set_uevent_suppress(f_dev, true); @@ -881,6 +906,7 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, del_timer_sync(&fw_priv->timeout); +handle_fw: mutex_lock(&fw_lock); if (!buf->size || test_bit(FW_STATUS_ABORT, &buf->status)) retval = -ENOENT; @@ -910,6 +936,9 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, fw_priv->buf = NULL; mutex_unlock(&fw_lock); + if (direct_load) + goto err_put_dev; + device_remove_file(f_dev, &dev_attr_loading); err_del_bin_attr: device_remove_bin_file(f_dev, &firmware_attr_data); -- cgit v0.10.2 From d28d3882bd1fdb88ae4e02f11b091a92b0e5068b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 9 Oct 2012 12:01:04 +0800 Subject: firmware loader: sync firmware cache by async_synchronize_full_domain async.c has provided synchronization mechanism on async_schedule_*, so use async_synchronize_full_domain to sync caching firmware instead of reinventing the wheel. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index a095d84..8945f4e 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -116,8 +116,6 @@ struct firmware_cache { spinlock_t name_lock; struct list_head fw_names; - wait_queue_head_t wait_queue; - int cnt; struct delayed_work work; struct notifier_block pm_notify; @@ -1166,6 +1164,8 @@ int uncache_firmware(const char *fw_name) } #ifdef CONFIG_PM_SLEEP +static ASYNC_DOMAIN_EXCLUSIVE(fw_cache_domain); + static struct fw_cache_entry *alloc_fw_cache_entry(const char *name) { struct fw_cache_entry *fce; @@ -1232,12 +1232,6 @@ static void __async_dev_cache_fw_image(void *fw_entry, free_fw_cache_entry(fce); } - - spin_lock(&fwc->name_lock); - fwc->cnt--; - spin_unlock(&fwc->name_lock); - - wake_up(&fwc->wait_queue); } /* called with dev->devres_lock held */ @@ -1278,7 +1272,6 @@ static void dev_cache_fw_image(struct device *dev, void *data) spin_lock(&fwc->name_lock); /* only one cache entry for one firmware */ if (!__fw_entry_found(fce->name)) { - fwc->cnt++; list_add(&fce->list, &fwc->fw_names); } else { free_fw_cache_entry(fce); @@ -1287,8 +1280,9 @@ static void dev_cache_fw_image(struct device *dev, void *data) spin_unlock(&fwc->name_lock); if (fce) - async_schedule(__async_dev_cache_fw_image, - (void *)fce); + async_schedule_domain(__async_dev_cache_fw_image, + (void *)fce, + &fw_cache_domain); } } @@ -1350,21 +1344,7 @@ static void device_cache_fw_images(void) mutex_unlock(&fw_lock); /* wait for completion of caching firmware for all devices */ - spin_lock(&fwc->name_lock); - for (;;) { - prepare_to_wait(&fwc->wait_queue, &wait, - TASK_UNINTERRUPTIBLE); - if (!fwc->cnt) - break; - - spin_unlock(&fwc->name_lock); - - schedule(); - - spin_lock(&fwc->name_lock); - } - spin_unlock(&fwc->name_lock); - finish_wait(&fwc->wait_queue, &wait); + async_synchronize_full_domain(&fw_cache_domain); loading_timeout = old_timeout; } @@ -1452,9 +1432,7 @@ static void __init fw_cache_init(void) #ifdef CONFIG_PM_SLEEP spin_lock_init(&fw_cache.name_lock); INIT_LIST_HEAD(&fw_cache.fw_names); - fw_cache.cnt = 0; - init_waitqueue_head(&fw_cache.wait_queue); INIT_DELAYED_WORK(&fw_cache.work, device_uncache_fw_images_work); -- cgit v0.10.2 From 9fdbf671ba7e8adb2cbb93d716232ebcab55f6bd Mon Sep 17 00:00:00 2001 From: Luigi Semenzato Date: Tue, 21 Aug 2012 14:52:20 -0700 Subject: perf tools: do not flush maps on COMM for perf report This fixes a long-standing bug caused by the lack of separate COMM and EXEC record types, which makes "perf report" lose track of symbols when a process renames itself. With this fix (suggested by Stephane Eranian), a COMM (rename) no longer flushes the maps, which is the correct behavior. An EXEC also no longer flushes the maps, but this doesn't matter because as new mappings are created (for the executable and the libraries) the old mappings are automatically removed. This is not by accident: the functionality is necessary because DLLs can be explicitly loaded at any time with dlopen(), possibly on top of existing text, so "perf report" handles correctly the clobbering of new mappings on top of old ones. An alternative patch (which I proposed earlier) would be to introduce a separate PERF_RECORD_EXEC type, but it is a much larger change (about 300 lines) and is not necessary. Signed-off-by: Luigi Semenzato Tested-by: Stephane Eranian Acked-by: Stephane Eranian Cc: "Eric W. Biederman" Cc: "Rafael J. Wysocki" Cc: Alexander Viro Cc: Andi Kleen Cc: Andrew Morton Cc: David Ahern Cc: Frederic Weisbecker Cc: Greg Kroah-Hartman Cc: Ingo Molnar Cc: Lucas De Marchi Cc: Namhyung Kim Cc: Oleg Nesterov Cc: Olof Johansson Cc: Paul Gortmaker Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Robert Richter Cc: Sonny Rao Cc: Stephane Eranian Cc: Stephen Wilson Cc: Tejun Heo Cc: Vasiliy Kulikov Link: http://lkml.kernel.org/r/1345585940-6497-1-git-send-email-semenzato@chromium.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c index fb4b7ea..8b3e593 100644 --- a/tools/perf/util/thread.c +++ b/tools/perf/util/thread.c @@ -39,7 +39,6 @@ int thread__set_comm(struct thread *self, const char *comm) err = self->comm == NULL ? -ENOMEM : 0; if (!err) { self->comm_set = true; - map_groups__flush(&self->mg); } return err; } -- cgit v0.10.2 From 42be73989c18931a394515b83aeae9246aa8b7b9 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sat, 20 Oct 2012 18:29:34 +0200 Subject: perf test: Fix exclude_guest parse events tests Event parsing tests are broken by following commit: perf tool: Precise mode requires exclude_guest commit 1342798cc13e3b48d9b5738f0c8fa812ccea8101 Author: David Ahern Date: Thu Sep 13 14:59:13 2012 -0600 which enables 'exclude_guest' modifier any time the 'precise' modifier is detected. Fixing related tests and adding special comment. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Jiri Olsa Tested-by: David Ahern Acked-by: David Ahern Cc: David Ahern Cc: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c index 28c18d1..516ecd9 100644 --- a/tools/perf/util/parse-events-test.c +++ b/tools/perf/util/parse-events-test.c @@ -513,7 +513,8 @@ static int test__group1(struct perf_evlist *evlist) TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user); TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel); TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv); - TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + /* use of precise requires exclude_guest */ + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2); TEST_ASSERT_VAL("wrong leader", evsel->leader == leader); @@ -599,7 +600,8 @@ static int test__group3(struct perf_evlist *evlist __maybe_unused) TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user); TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel); TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv); - TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + /* use of precise requires exclude_guest */ + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 3); TEST_ASSERT_VAL("wrong leader", evsel->leader == leader); @@ -662,7 +664,8 @@ static int test__group4(struct perf_evlist *evlist __maybe_unused) TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user); TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel); TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv); - TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + /* use of precise requires exclude_guest */ + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 1); TEST_ASSERT_VAL("wrong group name", !evsel->group_name); @@ -676,7 +679,8 @@ static int test__group4(struct perf_evlist *evlist __maybe_unused) TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user); TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel); TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv); - TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + /* use of precise requires exclude_guest */ + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2); TEST_ASSERT_VAL("wrong leader", evsel->leader == leader); -- cgit v0.10.2 From f3ac1a4b667eeffcedf779f45529c95d66ddc71a Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Tue, 16 Oct 2012 20:07:03 +0800 Subject: KVM: MMU: fix release noslot pfn We can not directly call kvm_release_pfn_clean to release the pfn since we can meet noslot pfn which is used to cache mmio info into spte Signed-off-by: Xiao Guangrong Cc: stable@vger.kernel.org Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index d289fee..6f85fe0 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2497,8 +2497,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, } } - if (!is_error_pfn(pfn)) - kvm_release_pfn_clean(pfn); + kvm_release_pfn_clean(pfn); } static void nonpaging_new_cr3(struct kvm_vcpu *vcpu) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index c353b45..a65bc02 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1322,9 +1322,7 @@ EXPORT_SYMBOL_GPL(kvm_release_page_clean); void kvm_release_pfn_clean(pfn_t pfn) { - WARN_ON(is_error_pfn(pfn)); - - if (!kvm_is_mmio_pfn(pfn)) + if (!is_error_pfn(pfn) && !kvm_is_mmio_pfn(pfn)) put_page(pfn_to_page(pfn)); } EXPORT_SYMBOL_GPL(kvm_release_pfn_clean); -- cgit v0.10.2 From 7f46ddbd487e0d0528d89534fdfb31d885977804 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Sun, 14 Oct 2012 13:08:58 +0200 Subject: KVM: apic: fix LDR calculation in x2apic mode Signed-off-by: Gleb Natapov Reviewed-by: Chegu Vinod Tested-by: Chegu Vinod Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index c6e6b72..43e9fad 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1311,7 +1311,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value) vcpu->arch.apic_base = value; if (apic_x2apic_mode(apic)) { u32 id = kvm_apic_id(apic); - u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf)); + u32 ldr = ((id >> 4) << 16) | (1 << (id & 0xf)); kvm_apic_set_ldr(apic, ldr); } apic->base_address = apic->vcpu->arch.apic_base & -- cgit v0.10.2 From c5e015d4949aa665c486cae6884beb00b97e3dea Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Fri, 19 Oct 2012 12:11:55 -0400 Subject: KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT KVM_PV_REASON_PAGE_NOT_PRESENT kicks cpu out of idleness, but we haven't marked that spot as an exit from idleness. Not doing so can cause RCU warnings such as: [ 732.788386] =============================== [ 732.789803] [ INFO: suspicious RCU usage. ] [ 732.790032] 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 Tainted: G W [ 732.790032] ------------------------------- [ 732.790032] include/linux/rcupdate.h:738 rcu_read_lock() used illegally while idle! [ 732.790032] [ 732.790032] other info that might help us debug this: [ 732.790032] [ 732.790032] [ 732.790032] RCU used illegally from idle CPU! [ 732.790032] rcu_scheduler_active = 1, debug_locks = 1 [ 732.790032] RCU used illegally from extended quiescent state! [ 732.790032] 2 locks held by trinity-child31/8252: [ 732.790032] #0: (&rq->lock){-.-.-.}, at: [] __schedule+0x178/0x8f0 [ 732.790032] #1: (rcu_read_lock){.+.+..}, at: [] cpuacct_charge+0xe/0x200 [ 732.790032] [ 732.790032] stack backtrace: [ 732.790032] Pid: 8252, comm: trinity-child31 Tainted: G W 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 [ 732.790032] Call Trace: [ 732.790032] [] lockdep_rcu_suspicious+0x10b/0x120 [ 732.790032] [] cpuacct_charge+0x90/0x200 [ 732.790032] [] ? cpuacct_charge+0xe/0x200 [ 732.790032] [] update_curr+0x1a3/0x270 [ 732.790032] [] dequeue_entity+0x2a/0x210 [ 732.790032] [] dequeue_task_fair+0x45/0x130 [ 732.790032] [] dequeue_task+0x89/0xa0 [ 732.790032] [] deactivate_task+0x1e/0x20 [ 732.790032] [] __schedule+0x879/0x8f0 [ 732.790032] [] ? trace_hardirqs_off+0xd/0x10 [ 732.790032] [] ? kvm_async_pf_task_wait+0x1d5/0x2b0 [ 732.790032] [] schedule+0x55/0x60 [ 732.790032] [] kvm_async_pf_task_wait+0x1f4/0x2b0 [ 732.790032] [] ? abort_exclusive_wait+0xb0/0xb0 [ 732.790032] [] ? prepare_to_wait+0x25/0x90 [ 732.790032] [] do_async_page_fault+0x56/0xa0 [ 732.790032] [] async_page_fault+0x28/0x30 Signed-off-by: Sasha Levin Acked-by: Gleb Natapov Acked-by: Paul E. McKenney Signed-off-by: Avi Kivity diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index b3e5e51..4180a87 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -247,7 +247,10 @@ do_async_page_fault(struct pt_regs *regs, unsigned long error_code) break; case KVM_PV_REASON_PAGE_NOT_PRESENT: /* page is swapped out by the host. */ + rcu_irq_enter(); + exit_idle(); kvm_async_pf_task_wait((u32)read_cr2()); + rcu_irq_exit(); break; case KVM_PV_REASON_PAGE_READY: rcu_irq_enter(); -- cgit v0.10.2 From 32c631f9f2566d09d32abc2f4c7aa24c6d8b5641 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 12 Oct 2012 21:10:11 +0000 Subject: RDMA/cxgb4: Don't free chunk that we have failed to allocate In the error path of registering memory when there's a failure to allocate a chunk from the memory pool, we try to free the same chunk we just failed to allocate, which will BUG(). Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 57e07c6..afd8179 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -468,7 +468,7 @@ struct ib_mr *c4iw_register_phys_mem(struct ib_pd *pd, ret = alloc_pbl(mhp, npages); if (ret) { kfree(page_list); - goto err_pbl; + goto err; } ret = write_pbl(&mhp->rhp->rdev, page_list, mhp->attr.pbl_addr, -- cgit v0.10.2 From 3b6054da68f9b0d5ed6a7ed0f42a79e61904352c Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Mon, 1 Oct 2012 22:21:12 +0300 Subject: usb hub: send clear_tt_buffer_complete events when canceling TT clear work There is a race condition in the USB hub code with regard to handling TT clear requests that can get the HCD driver in a deadlock. Usually when an TT clear request is scheduled it will be executed immediately: <7>[ 6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 6.078299] hub_tt_work:731 <7>[ 9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us] <7>[ 9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule <7>[ 9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us] <7>[ 9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us] <7>[ 10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 10.116537] hub_tt_work:731 However, if a suspend operation is triggered before hub_tt_work is scheduled, hub_quiesce will cancel the work without notifying the HCD driver: <3>[ 35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80 <5>[ 35.034022] sd 0:0:0:0: [sda] Stopping disk <7>[ 35.034039] hub 2-1:1.0: hub_suspend <7>[ 35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us] <7>[ 35.035085] hub 1-0:1.0: hub_suspend <7>[ 35.035102] usb usb1: bus suspend, wakeup 0 <7>[ 35.035106] ehci_hcd 0000:00:1a.0: suspend root hub <7>[ 35.035298] hub 2-0:1.0: hub_suspend <7>[ 35.035313] usb usb2: bus suspend, wakeup 0 <7>[ 35.035315] ehci_hcd 0000:00:1d.0: suspend root hub <6>[ 35.250017] PM: suspend of devices complete after 216.979 msecs <6>[ 35.250822] PM: late suspend of devices complete after 0.799 msecs <7>[ 35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1 <7>[ 35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot <7>[ 35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1 <7>[ 35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot <6>[ 35.274254] PM: noirq suspend of devices complete after 23.442 msecs <6>[ 35.274975] ACPI: Preparing to enter system sleep state S3 <6>[ 35.292666] PM: Saving platform NVS memory <7>[ 35.295030] Disabling non-boot CPUs ... <6>[ 35.297351] CPU 1 is now offline <6>[ 35.300345] CPU 2 is now offline <6>[ 35.303929] CPU 3 is now offline <7>[ 35.303931] lockdep: fixing up alternatives. <6>[ 35.304825] Extended CMOS year: 2000 When the device will resume the EHCI driver will get stuck in ehci_endpoint_disable waiting for the tt_clearing flag to reset: <0>[ 47.610967] usb 2-1.3: **** DPM device timeout **** <7>[ 47.610972] f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0 <7>[ 47.610983] 15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30 <7>[ 47.610993] c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001 <7>[ 47.611004] Call Trace: <7>[ 47.611006] [] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611019] [] ? lock_release_holdtime.part.22+0x88/0xf0 <7>[ 47.611026] [] ? lock_timer_base.isra.35+0x26/0x50 <7>[ 47.611034] [] ? schedule_timeout+0x133/0x290 <7>[ 47.611044] [] schedule+0x1e/0x50 <7>[ 47.611051] [] schedule_timeout+0x138/0x290 <7>[ 47.611057] [] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611063] [] ? usleep_range+0x40/0x40 <7>[ 47.611070] [] schedule_timeout_uninterruptible+0x15/0x20 <7>[ 47.611077] [] ehci_endpoint_disable+0x64/0x160 <7>[ 47.611084] [] ? usb_hcd_flush_endpoint+0x10e/0x1d0 <7>[ 47.611092] [] ? sysfs_add_file+0x13/0x20 <7>[ 47.611100] [] usb_hcd_disable_endpoint+0x29/0x40 <7>[ 47.611107] [] usb_disable_endpoint+0x5c/0x80 <7>[ 47.611111] [] usb_disable_interface+0x37/0x50 <7>[ 47.611116] [] usb_reset_and_verify_device+0x4b0/0x640 <7>[ 47.611122] [] ? hub_port_status+0xb5/0x100 <7>[ 47.611129] [] usb_port_resume+0xd5/0x220 <7>[ 47.611136] [] generic_resume+0xf/0x30 <7>[ 47.611142] [] usb_resume+0x133/0x180 <7>[ 47.611147] [] ? usb_dev_thaw+0x10/0x10 <7>[ 47.611152] [] usb_dev_resume+0xd/0x10 <7>[ 47.611157] [] dpm_run_callback+0x40/0xb0 <7>[ 47.611164] [] ? pm_runtime_enable+0x43/0x70 <7>[ 47.611171] [] device_resume+0x1a6/0x2c0 <7>[ 47.611177] [] ? dpm_show_time+0xe0/0xe0 <7>[ 47.611183] [] async_resume+0x19/0x40 <7>[ 47.611189] [] async_run_entry_fn+0x64/0x160 <7>[ 47.611196] [] ? process_one_work+0x104/0x480 <7>[ 47.611203] [] ? process_one_work+0x10c/0x480 <7>[ 47.611209] [] process_one_work+0x180/0x480 <7>[ 47.611215] [] ? process_one_work+0x104/0x480 <7>[ 47.611220] [] ? async_schedule+0x10/0x10 <7>[ 47.611226] [] worker_thread+0x11c/0x2f0 <7>[ 47.611233] [] ? manage_workers.isra.27+0x1f0/0x1f0 <7>[ 47.611239] [] kthread+0x78/0x80 <7>[ 47.611244] [] ? timer_cpu_notify+0xd6/0x20d <7>[ 47.611253] [] ? __init_kthread_worker+0x60/0x60 <7>[ 47.611258] [] kernel_thread_helper+0x6/0xd <7>[ 47.611283] ------------[ cut here ]------------ This patch changes hub_quiesce behavior to flush the TT clear work instead of canceling it, to make sure that no TT clear request remains uncompleted before suspend. Signed-off-by: Octavian Purdila Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 64854d7..1181e91 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -739,13 +739,16 @@ static void hub_tt_work(struct work_struct *work) int limit = 100; spin_lock_irqsave (&hub->tt.lock, flags); - while (--limit && !list_empty (&hub->tt.clear_list)) { + while (!list_empty(&hub->tt.clear_list)) { struct list_head *next; struct usb_tt_clear *clear; struct usb_device *hdev = hub->hdev; const struct hc_driver *drv; int status; + if (!hub->quiescing && --limit < 0) + break; + next = hub->tt.clear_list.next; clear = list_entry (next, struct usb_tt_clear, clear_list); list_del (&clear->clear_list); @@ -1210,7 +1213,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); if (hub->tt.hub) - cancel_work_sync(&hub->tt.clear_work); + flush_work_sync(&hub->tt.clear_work); } /* caller has locked the hub device */ -- cgit v0.10.2 From 6681e63399926651cc29bcb9d92229b6f1cf1daa Mon Sep 17 00:00:00 2001 From: Fred Brooks Date: Tue, 2 Oct 2012 11:10:26 +0100 Subject: staging: comedi: ni_daq_700: fix dio subdevice regression Here is a small patch to fix a problem caused by a previous patch that removed the callback function. The callback remove patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1de02225358988e8fd48d1dc3fd12336bbae258a I finally booted my dev machine on the latest kernel (running Debian here so it's still on 3.2 normally) to test the ni_daq_700 driver with my test program and noticed this bug. Shift the DIO_R read result to bits 8..15 Digital direction configuration: channels 0-7 output, 8-15 input (8225 device emu as port A output, port B input, port C N/A). Cc: # 3.6.x Signed-off-by: Fred Brooks Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 2ba0ade..68d7c6a 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -95,7 +95,7 @@ static int daq700_dio_insn_bits(struct comedi_device *dev, } data[1] = s->state & 0xff; - data[1] |= inb(dev->iobase + DIO_R); + data[1] |= inb(dev->iobase + DIO_R) << 8; return insn->n; } -- cgit v0.10.2 From f4dd2367f3ad276fe49c89a522267ea5ccb6bf80 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:15 +0100 Subject: staging: comedi: 8255_pci: fix possible NULL deref during detach `pci_8255_detach()` will be called by the comedi core if `pci_8255_attach_pci()` returns an error. It currently assumes that both `board` (assigned from the return value of `comedi_board(dev)`) and `devpriv` (assigned from `dev->private`) are non-null, but they might be null, leading to a null pointer dereference. `pci_8255_detach()` doesn't need to do anything if either `board` or `devpriv` are null, so just return early in this case. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c index 7dff3c0..d00aff6 100644 --- a/drivers/staging/comedi/drivers/8255_pci.c +++ b/drivers/staging/comedi/drivers/8255_pci.c @@ -289,6 +289,8 @@ static void pci_8255_detach(struct comedi_device *dev) struct comedi_subdevice *s; int i; + if (!board || !devpriv) + return; if (dev->subdevices) { for (i = 0; i < board->n_8255; i++) { s = &dev->subdevices[i]; -- cgit v0.10.2 From dfb2540e91e1f63765bc3ff497ad0b714d774261 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:16 +0100 Subject: staging: comedi: amplc_dio200: fix possible NULL deref during detach `dio200_detach()` is called by the comedi core to clean up if either `dio200_attach()` or `dio200_attach_pci()` return an error. It assigns `thisboard` to the return value of `comedi_board(dev)` and assumes it is non-null. In the case of a previous call to `dio200_attach()` it won't be `NULL` because the comedi core will have pointed it to one of the elements of `dio200_boards[]`, but in the case of a previous call to `dio200_attach_pci()` it could be `NULL`, leading to a null pointer dereference. Check that `thisboard` is valid at the top of `dio200_detach()` and return early if it is `NULL`. This is okay because the only other thing that could have been allocated is `dev->private` and that is freed by the comedi core, not by this function. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 08f3052..29eb52d 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -1410,6 +1410,8 @@ static void dio200_detach(struct comedi_device *dev) const struct dio200_layout_struct *layout; unsigned n; + if (!thisboard) + return; if (dev->irq) free_irq(dev->irq, dev); if (dev->subdevices) { -- cgit v0.10.2 From aaeb61a97b7159ebe30b18a422d04eeabfa8790b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:17 +0100 Subject: staging: comedi: amplc_pc236: fix invalid register access during detach `pc236_detach()` is called by the comedi core if it attempted to attach a device and failed. `pc236_detach()` calls `pc236_intr_disable()` if the comedi device private data pointer (`devpriv`) is non-null. This test is insufficient as `pc236_intr_disable()` accesses hardware registers and the attach routine may have failed before it has saved their I/O base addresses. Fix it by checking `dev->iobase` is non-zero before calling `pc236_intr_disable()` as that means the I/O base addresses have been saved and the hardware registers can be accessed. It also implies the comedi device private data pointer is valid, so there is no need to check it. Cc: # 3.5.x, 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index eacb5e4..36768b2 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -573,9 +573,8 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev, static void pc236_detach(struct comedi_device *dev) { const struct pc236_board *thisboard = comedi_board(dev); - struct pc236_private *devpriv = dev->private; - if (devpriv) + if (dev->iobase) pc236_intr_disable(dev); if (dev->irq) free_irq(dev->irq, dev); -- cgit v0.10.2 From 2db012bd40b889d8e5483d3daa07af04c4c109d8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:18 +0100 Subject: staging: comedi: amplc_pc236: fix possible NULL deref during detach `pc236_detach()` is called by the comedi core to clean up if either `pc236_attach()` or `pc236_attach_pci()` returns an error. It sets `thisboard` to the return value of `comedi_board(dev)` and assumes it is non-null. This is a valid assumption if `pc236_attach()` fails, but not if `pc236_attach_pci()` fails, leading to a possible NULL pointer dereference. Check `thisboard` at the top of `pc236_detach()` and return early if it is `NULL`. This is okay because the only other thing that could have been allocated is `dev->private` and that is freed by the comedi core, not by this function. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index 36768b2..4e4f3c1 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -574,6 +574,8 @@ static void pc236_detach(struct comedi_device *dev) { const struct pc236_board *thisboard = comedi_board(dev); + if (!thisboard) + return; if (dev->iobase) pc236_intr_disable(dev); if (dev->irq) -- cgit v0.10.2 From 1d1171ffda585c1cab7bd7cf4bd8f8fd5923fb4a Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:19 +0100 Subject: staging: comedi: amplc_pc263: fix possible NULL deref during detach `pc263_detach()` is called by the comedi core to clean up if either `pc263_attach()` or `pc263_attach_pci()` returns an error. It sets `thisboard` to the return value of `comedi_board(dev)` and assumes it is non-null. This is a valid assumption if `pc263_attach()` fails, but not if `pc263_attach_pci()` fails, leading to a possible NULL pointer dereference. Check `thisboard` at the top of `pc263_detach()` and return early if it is `NULL`. This is okay because no other resources need cleaning up in this case. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c index 60830cc..d0a4c44 100644 --- a/drivers/staging/comedi/drivers/amplc_pc263.c +++ b/drivers/staging/comedi/drivers/amplc_pc263.c @@ -323,6 +323,8 @@ static void pc263_detach(struct comedi_device *dev) { const struct pc263_board *thisboard = comedi_board(dev); + if (!thisboard) + return; if (is_isa_board(thisboard)) { if (dev->iobase) release_region(dev->iobase, PC263_IO_SIZE); -- cgit v0.10.2 From ee280d134f2e05e0172369a53fbe202dbfc527fa Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:20 +0100 Subject: staging: comedi: das08: fix possible NULL deref during detach `das08_detach()` is called by the comedi core to clean up if either `das08_attach()` or `das08_attach_pci()` returns an error. It sets `thisboard` to the return value of `comedi_board(dev)` and assumes it is non-null. This is a valid assumption if `das08_attach()` fails, but not if `das08_attach_pci()` fails, leading to a possible NULL pointer dereference. Check `thisboard` at the top of `das08_detach()` and return early if it is `NULL`. This is okay because the only other thing that could have been allocated is `dev->private` and that is freed by the comedi core, not by this function. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index 5fd21fa..c304528 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -846,6 +846,8 @@ static void __maybe_unused das08_detach(struct comedi_device *dev) { const struct das08_board_struct *thisboard = comedi_board(dev); + if (!thisboard) + return; das08_common_detach(dev); if (is_isa_board(thisboard)) { if (dev->iobase) -- cgit v0.10.2 From 922b67c1ac53014d80649a961a2fde700cd065d8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 3 Oct 2012 16:25:21 +0100 Subject: staging: comedi: ni_labpc: fix possible NULL deref during detach `labpc_common_detach()` is called by the comedi core to clean up if either `labpc_attach()` (including the one in the "ni_labpc_cs" module) or `labpc_attach_pci()` returns an error. It assumes the `thisboard` macro (expanding to `((struct labpc_board_struct *)dev->board_ptr)`) is non-null. This is a valid assumption if `labpc_attach()` fails, but not if `labpc_attach_pci()` fails, leading to a possible NULL pointer dereference. Check `thisboard` at the top of `labpc_common_detach()` and return early if it is `NULL`. This is okay because the only other thing that could have been allocated is `dev->private` and that is freed by the comedi core, not by this function. Cc: # 3.6.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 28b91a6..b5a19a0 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -772,6 +772,8 @@ void labpc_common_detach(struct comedi_device *dev) { struct comedi_subdevice *s; + if (!thisboard) + return; if (dev->subdevices) { s = &dev->subdevices[2]; subdev_8255_cleanup(dev, s); -- cgit v0.10.2 From 6f73601efb35c7003f5c58c2bc6fd08f3652169c Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Fri, 19 Oct 2012 15:14:44 +0000 Subject: tcp: add SYN/data info to TCP_INFO Add a bit TCPI_OPT_SYN_DATA (32) to the socket option TCP_INFO:tcpi_options. It's set if the data in SYN (sent or received) is acked by SYN-ACK. Server or client application can use this information to check Fast Open success rate. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8a7fc4b..60b7aac 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -191,7 +191,8 @@ struct tcp_sock { u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ early_retrans_delayed:1, /* Delayed ER timer installed */ syn_data:1, /* SYN includes data */ - syn_fastopen:1; /* SYN includes Fast Open option */ + syn_fastopen:1, /* SYN includes Fast Open option */ + syn_data_acked:1;/* data in SYN is acked by SYN-ACK */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index c4b89a5..e962faa 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -130,6 +130,7 @@ enum { #define TCPI_OPT_WSCALE 4 #define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ #define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ +#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ enum tcp_ca_state { TCP_CA_Open = 0, diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index b7c2f43..197c000 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2764,6 +2764,8 @@ void tcp_get_info(const struct sock *sk, struct tcp_info *info) info->tcpi_options |= TCPI_OPT_ECN; if (tp->ecn_flags & TCP_ECN_SEEN) info->tcpi_options |= TCPI_OPT_ECN_SEEN; + if (tp->syn_data_acked) + info->tcpi_options |= TCPI_OPT_SYN_DATA; info->tcpi_rto = jiffies_to_usecs(icsk->icsk_rto); info->tcpi_ato = jiffies_to_usecs(icsk->icsk_ack.ato); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 432c366..036f857 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5646,6 +5646,7 @@ static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack, tcp_rearm_rto(sk); return true; } + tp->syn_data_acked = tp->syn_data; return false; } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index ef998b0..0c4a643 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1461,6 +1461,7 @@ static int tcp_v4_conn_req_fastopen(struct sock *sk, skb_set_owner_r(skb, child); __skb_queue_tail(&child->sk_receive_queue, skb); tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq; + tp->syn_data_acked = 1; } sk->sk_data_ready(sk, 0); bh_unlock_sock(child); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 27536ba..a7302d9 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -510,6 +510,7 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, newtp->rx_opt.mss_clamp = req->mss; TCP_ECN_openreq_child(newtp, req); newtp->fastopen_rsk = NULL; + newtp->syn_data_acked = 0; TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_PASSIVEOPENS); } -- cgit v0.10.2 From 8a6e29d6d037de0dd62fe6648ba9b29866db5416 Mon Sep 17 00:00:00 2001 From: Joe Jin Date: Sun, 21 Oct 2012 14:40:36 +0000 Subject: qla3xxx: Ensure request/response queue addr writes to the registers Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin Cc: Jitendra Kalsaria Cc: Ron Mercer Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index df09b1c..6407d0d 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -2525,6 +2525,13 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev) qdev->req_q_size = (u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req)); + qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb); + + /* The barrier is required to ensure request and response queue + * addr writes to the registers. + */ + wmb(); + qdev->req_q_virt_addr = pci_alloc_consistent(qdev->pdev, (size_t) qdev->req_q_size, @@ -2536,8 +2543,6 @@ static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev) return -ENOMEM; } - qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb); - qdev->rsp_q_virt_addr = pci_alloc_consistent(qdev->pdev, (size_t) qdev->rsp_q_size, -- cgit v0.10.2 From 3d861f661006606bf159fd6bd973e83dbf21d0f9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 22 Oct 2012 09:03:40 +0000 Subject: net: fix secpath kmemleak Mike Kazantsev found 3.5 kernels and beyond were leaking memory, and tracked the faulty commit to a1c7fff7e18f59e ("net: netdev_alloc_skb() use build_skb()") While this commit seems fine, it uncovered a bug introduced in commit bad43ca8325 ("net: introduce skb_try_coalesce()), in function kfree_skb_partial()"): If head is stolen, we free the sk_buff, without removing references on secpath (skb->sp). So IPsec + IP defrag/reassembly (using skb coalescing), or TCP coalescing could leak secpath objects. Fix this bug by calling skb_release_head_state(skb) to properly release all possible references to linked objects. Reported-by: Mike Kazantsev Signed-off-by: Eric Dumazet Bisected-by: Mike Kazantsev Tested-by: Mike Kazantsev Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 6e04b1f..4007c14 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3379,10 +3379,12 @@ EXPORT_SYMBOL(__skb_warn_lro_forwarding); void kfree_skb_partial(struct sk_buff *skb, bool head_stolen) { - if (head_stolen) + if (head_stolen) { + skb_release_head_state(skb); kmem_cache_free(skbuff_head_cache, skb); - else + } else { __kfree_skb(skb); + } } EXPORT_SYMBOL(kfree_skb_partial); -- cgit v0.10.2 From 65635cbc37e011e71b208257a25e7c1078cd039b Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Wed, 17 Oct 2012 17:45:36 +0900 Subject: blkcg: Fix use-after-free of q->root_blkg and q->root_rl.blkg blk_put_rl() does not call blkg_put() for q->root_rl because we don't take request list reference on q->root_blkg. However, if root_blkg is once attached then detached (freed), blk_put_rl() is confused by the bogus pointer in q->root_blkg. For example, with !CONFIG_BLK_DEV_THROTTLING && CONFIG_CFQ_GROUP_IOSCHED, switching IO scheduler from cfq to deadline will cause system stall after the following warning with 3.6: > WARNING: at /work/build/linux/block/blk-cgroup.h:250 > blk_put_rl+0x4d/0x95() > Modules linked in: bridge stp llc sunrpc acpi_cpufreq freq_table mperf > ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 > Pid: 0, comm: swapper/0 Not tainted 3.6.0 #1 > Call Trace: > [] warn_slowpath_common+0x85/0x9d > [] warn_slowpath_null+0x1a/0x1c > [] blk_put_rl+0x4d/0x95 > [] __blk_put_request+0xc3/0xcb > [] blk_finish_request+0x232/0x23f > [] ? blk_end_bidi_request+0x34/0x5d > [] blk_end_bidi_request+0x42/0x5d > [] blk_end_request+0x10/0x12 > [] scsi_io_completion+0x207/0x4d5 > [] scsi_finish_command+0xfa/0x103 > [] scsi_softirq_done+0xff/0x108 > [] blk_done_softirq+0x8d/0xa1 > [] ? > generic_smp_call_function_single_interrupt+0x9f/0xd7 > [] __do_softirq+0x102/0x213 > [] ? lock_release_holdtime+0xb6/0xbb > [] ? raise_softirq_irqoff+0x9/0x3d > [] call_softirq+0x1c/0x30 > [] do_softirq+0x4b/0xa3 > [] irq_exit+0x53/0xd5 > [] smp_call_function_single_interrupt+0x34/0x36 > [] call_function_single_interrupt+0x6f/0x80 > [] ? mwait_idle+0x94/0xcd > [] ? mwait_idle+0x8b/0xcd > [] cpu_idle+0xbb/0x114 > [] rest_init+0xc1/0xc8 > [] ? csum_partial_copy_generic+0x16c/0x16c > [] start_kernel+0x3d4/0x3e1 > [] ? kernel_init+0x1f7/0x1f7 > [] x86_64_start_reservations+0xb8/0xbd > [] x86_64_start_kernel+0x101/0x110 This patch clears q->root_blkg and q->root_rl.blkg when root blkg is destroyed. Signed-off-by: Jun'ichi Nomura Acked-by: Vivek Goyal Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index cafcd74..3ad5e3f 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -285,6 +285,13 @@ static void blkg_destroy_all(struct request_queue *q) blkg_destroy(blkg); spin_unlock(&blkcg->lock); } + + /* + * root blkg is destroyed. Just clear the pointer since + * root_rl does not take reference on root blkg. + */ + q->root_blkg = NULL; + q->root_rl.blkg = NULL; } static void blkg_rcu_free(struct rcu_head *rcu_head) -- cgit v0.10.2 From 65c77fd9e8a1c8c3da0bbbea6b7efa3d6ef265f8 Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Mon, 22 Oct 2012 10:15:37 +0900 Subject: blkcg: stop iteration early if root_rl is the only request list __blk_queue_next_rl() finds next request list based on blkg_list while skipping root_blkg in the list. OTOH, root_rl is special as it may exist even without root_blkg. Though the later part of the function handles such a case correctly, exiting early is good for readability of the code. Signed-off-by: Jun'ichi Nomura Cc: Tejun Heo Acked-by: Vivek Goyal Signed-off-by: Jens Axboe diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 3ad5e3f..d0b7703 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -333,6 +333,9 @@ struct request_list *__blk_queue_next_rl(struct request_list *rl, */ if (rl == &q->root_rl) { ent = &q->blkg_list; + /* There are no more block groups, hence no request lists */ + if (list_empty(ent)) + return NULL; } else { blkg = container_of(rl, struct blkcg_gq, rl); ent = &blkg->q_node; -- cgit v0.10.2 From 386bc35a2d548c28a5083b2e162a20251b37cab5 Mon Sep 17 00:00:00 2001 From: Anna Leuschner Date: Mon, 22 Oct 2012 21:53:36 +0200 Subject: vfs: fix: don't increase bio_slab_max if krealloc() fails Without the patch, bio_slab_max, representing bio_slabs capacity, is increased before krealloc() of bio_slabs. If krealloc() fails, bio_slab_max is too high. Fix that by only updating bio_slab_max if krealloc() is successful. Signed-off-by: Anna Leuschner Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 9298c65..b96fc6c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -75,6 +75,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) unsigned int sz = sizeof(struct bio) + extra_size; struct kmem_cache *slab = NULL; struct bio_slab *bslab, *new_bio_slabs; + unsigned int new_bio_slab_max; unsigned int i, entry = -1; mutex_lock(&bio_slab_lock); @@ -97,12 +98,13 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) goto out_unlock; if (bio_slab_nr == bio_slab_max && entry == -1) { - bio_slab_max <<= 1; + new_bio_slab_max = bio_slab_max << 1; new_bio_slabs = krealloc(bio_slabs, - bio_slab_max * sizeof(struct bio_slab), + new_bio_slab_max * sizeof(struct bio_slab), GFP_KERNEL); if (!new_bio_slabs) goto out_unlock; + bio_slab_max = new_bio_slab_max; bio_slabs = new_bio_slabs; } if (entry == -1) -- cgit v0.10.2 From 675d66b0ed5fd170d6a44cf8dbb3fa56a5347bdb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Tue, 16 Oct 2012 15:29:54 -0700 Subject: Staging: android: binder: Fix memory leak on thread/process exit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a thread or process exited while a reply, one-way transaction or death notification was pending, the struct holding the pending work was leaked. Signed-off-by: Arve Hjønnevåg Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 7b0ba92..db6c4c5 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -2419,14 +2419,38 @@ static void binder_release_work(struct list_head *list) struct binder_transaction *t; t = container_of(w, struct binder_transaction, work); - if (t->buffer->target_node && !(t->flags & TF_ONE_WAY)) + if (t->buffer->target_node && + !(t->flags & TF_ONE_WAY)) { binder_send_failed_reply(t, BR_DEAD_REPLY); + } else { + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, + "binder: undelivered transaction %d\n", + t->debug_id); + t->buffer->transaction = NULL; + kfree(t); + binder_stats_deleted(BINDER_STAT_TRANSACTION); + } } break; case BINDER_WORK_TRANSACTION_COMPLETE: { + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, + "binder: undelivered TRANSACTION_COMPLETE\n"); kfree(w); binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE); } break; + case BINDER_WORK_DEAD_BINDER_AND_CLEAR: + case BINDER_WORK_CLEAR_DEATH_NOTIFICATION: { + struct binder_ref_death *death; + + death = container_of(w, struct binder_ref_death, work); + binder_debug(BINDER_DEBUG_DEAD_TRANSACTION, + "binder: undelivered death notification, %p\n", + death->cookie); + kfree(death); + binder_stats_deleted(BINDER_STAT_DEATH); + } break; default: + pr_err("binder: unexpected work type, %d, not freed\n", + w->type); break; } } @@ -2899,6 +2923,7 @@ static void binder_deferred_release(struct binder_proc *proc) nodes++; rb_erase(&node->rb_node, &proc->nodes); list_del_init(&node->work.entry); + binder_release_work(&node->async_todo); if (hlist_empty(&node->refs)) { kfree(node); binder_stats_deleted(BINDER_STAT_NODE); @@ -2937,6 +2962,7 @@ static void binder_deferred_release(struct binder_proc *proc) binder_delete_ref(ref); } binder_release_work(&proc->todo); + binder_release_work(&proc->delivered_death); buffers = 0; while ((n = rb_first(&proc->allocated_buffers))) { -- cgit v0.10.2 From 585650dcec88e704a19bb226a34b6a7166111623 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Tue, 16 Oct 2012 15:29:55 -0700 Subject: Staging: android: binder: Allow using highmem for binder buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The default kernel mapping for the pages allocated for the binder buffers is never used. Set the __GFP_HIGHMEM flag when allocating these pages so we don't needlessly use low memory pages that may be required elsewhere. Signed-off-by: Arve Hjønnevåg Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index db6c4c5..5d4610b 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -567,7 +567,7 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate, page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE]; BUG_ON(*page); - *page = alloc_page(GFP_KERNEL | __GFP_ZERO); + *page = alloc_page(GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO); if (*page == NULL) { pr_err("binder: %d: binder_alloc_buf failed " "for page at %p\n", proc->pid, page_addr); -- cgit v0.10.2 From 170ed807340b4db0a5e010c2e4da43cf5a2c9a29 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 15 Oct 2012 15:38:34 +0800 Subject: usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource and checking the existence of port's power resource When setting usb port's acpi power resource, there will be some xhci hub requests. This will cause dead lock since xhci->lock has been held before setting acpi power resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might fall into sleep so release xhci->lock before invoking it. Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index aa90ad4..65d416c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -809,11 +809,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); + spin_unlock_irqrestore(&xhci->lock, flags); temp = usb_acpi_power_manageable(hcd->self.root_hub, wIndex); if (temp) usb_acpi_set_power_state(hcd->self.root_hub, wIndex, true); + spin_lock_irqsave(&xhci->lock, flags); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); @@ -917,11 +919,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_writel(xhci, temp & ~PORT_POWER, port_array[wIndex]); + spin_unlock_irqrestore(&xhci->lock, flags); temp = usb_acpi_power_manageable(hcd->self.root_hub, wIndex); if (temp) usb_acpi_set_power_state(hcd->self.root_hub, wIndex, false); + spin_lock_irqsave(&xhci->lock, flags); break; default: goto error; -- cgit v0.10.2 From 27c411c95a8e9ed92be658abf1d63e22873a3a66 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Mon, 15 Oct 2012 15:38:35 +0800 Subject: usb/xhci: Remove (__force__ __u16) before assigning DeviceRemovable and assign directly. Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16 and (__force__ __u16) doesn't need. Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 65d416c..a686cf4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -151,9 +151,8 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } - memset(&desc->u.ss.DeviceRemovable, - (__force __u16) cpu_to_le16(port_removable), - sizeof(__u16)); + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); } static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, -- cgit v0.10.2 From 856c3c5b28597f70068984d036bcee1d342ddb69 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 16 Oct 2012 00:08:53 -0600 Subject: ARM: OMAP3: PM: apply part of the erratum i582 workaround On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if, upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be unusable. This is erratum i582 in the OMAP36xx Silicon Errata document. This patch implements one of several parts of the workaround: the addition of the wakeup dependency between the PER and WKUP clockdomains, such that PER will wake up at the same time CORE_L3 does. This is not a complete workaround. For it to be complete: 1. the PER powerdomain's next power state must not be set to OSWR or OFF if the CORE powerdomain's next power state is set to CSWR or ON; 2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that PER went OFF while CORE stayed on. If loopback tests fail, then those devices will be unusable until PER and CORE can undergo a transition from ON to OSWR/OFF and back ON. Signed-off-by: Paul Walmsley Cc: Tero Kristo Cc: Kevin Hilman Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d..67d6613 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db..3a904de 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,14 +652,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +714,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +732,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = -- cgit v0.10.2 From 44b1d42a60f9daeb0070f7766d11711d1be06a8b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 15 Oct 2012 15:19:34 -0700 Subject: ARM: OMAP2: UART: fix console UART mismatched runtime PM status The runtime PM framework assumes that the hardware state of devices when initialized is disabled. For all omap_devices, we idle/disable device by default. However, the console uart uses a "no idle" option during omap_device init in order to allow earlyprintk usage to work seamlessly during boot. Because the hardware is left partially enabled after init (whatever the bootloader settings were), the omap_device should later be fully initialized (including mux) and the runtime PM framework should be told that the device is active, and not disabled so that the hardware state is in sync with runtime PM state. To fix, after the device has been created/registered, call omap_device_enable() to finialize init and use pm_runtime_set_active() to tell the runtime PM core the device is enabled. Tested on 2420/n810, 3530/Overo, 3530/Beagle, 3730/OveroSTORM, 3730/Beagle-xM, 4460/PandaES. Suggested-by: Russell King Cc: Felipe Balbi Cc: Sourav Poddar Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c81..a507cd6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) -- cgit v0.10.2 From eef6fcaa4295168e6eab2cce564ea258155e1bd7 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 18 Oct 2012 11:25:07 +0200 Subject: ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio Fixes the following errors: [ 2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel [ 2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel Which is because we failed to link the sidetone hwmod for McBSP2/3. The missing sidetone hwmod link will prevent omap_device_alloc() to append the DMA resources since we - accidentally - end up having the same number of resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports without the ST resources. Signed-off-by: Peter Ujfalusi Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea87..696e929 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { -- cgit v0.10.2 From 24942e8af19e5090374776a57db97b350ffd0fa6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Oct 2012 13:29:19 -0700 Subject: ARM: OMAP2+: Fix location of select PINCTRL Commit 8f31cefe (ARM: OMAP2+: select PINCTRL in Kconfig) added select PINCTRL, but accdentally added it to a wrong location. We want to select if for ARCH_OMAP2PLUS, not for ARCH_OMAP2PLUS_TYPICAL. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898..d669e22 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed..82fcb20 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF -- cgit v0.10.2 From 1d8643dd0548e8cb9114e53c353b09da016a72fb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 22 Oct 2012 13:30:03 -0700 Subject: ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. On n900 uart1 pins are not not used for uart, instead they are used to connect to a cell modem over ssi. Looks like we're currently missing these signal names for 3430 for some reason, and only have some of them listed for 3630. Obviously the signals are there for 3430 if n900 is using them and they are documented in some TRMs. Note that these will eventually be replaced by device tree based pinctrl-single.c driver. But for now these are needed to verify the SSI pins for devices like Nokia N900. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4..c47140b 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, -- cgit v0.10.2 From c8f2f0db1d0294aaf37e8a85bea9bbc4aaf5c0fe Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Wed, 10 Oct 2012 17:42:18 -0700 Subject: staging: zram: Fix handling of incompressible pages Change 130f315a (staging: zram: remove special handle of uncompressed page) introduced a bug in the handling of incompressible pages which resulted in memory allocation failure for such pages. When a page expands on compression, say from 4K to 4K+30, we were trying to do zsmalloc(pool, 4K+30). However, the maximum size which zsmalloc can allocate is PAGE_SIZE (for obvious reasons), so such allocation requests always return failure (0). For a page that has compressed size larger than the original size (this may happen with already compressed or random data), there is no point storing the compressed version as that would take more space and would also require time for decompression when needed again. So, the fix is to store any page, whose compressed size exceeds a threshold (max_zpage_size), as-it-is i.e. without compression. Memory required for storing this uncompressed page can then be requested from zsmalloc which supports PAGE_SIZE sized allocations. Lastly, the fix checks that we do not attempt to "decompress" the page which we stored in the uncompressed form -- we just memcpy() out such pages. Signed-off-by: Nitin Gupta Reported-by: viechweg@gmail.com Reported-by: paerley@gmail.com Reported-by: wu.tommy@gmail.com Acked-by: Minchan Kim Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c index 653b074..6edefde 100644 --- a/drivers/staging/zram/zram_drv.c +++ b/drivers/staging/zram/zram_drv.c @@ -223,8 +223,13 @@ static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec, cmem = zs_map_object(zram->mem_pool, zram->table[index].handle, ZS_MM_RO); - ret = lzo1x_decompress_safe(cmem, zram->table[index].size, + if (zram->table[index].size == PAGE_SIZE) { + memcpy(uncmem, cmem, PAGE_SIZE); + ret = LZO_E_OK; + } else { + ret = lzo1x_decompress_safe(cmem, zram->table[index].size, uncmem, &clen); + } if (is_partial_io(bvec)) { memcpy(user_mem + bvec->bv_offset, uncmem + offset, @@ -342,8 +347,11 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index, goto out; } - if (unlikely(clen > max_zpage_size)) + if (unlikely(clen > max_zpage_size)) { zram_stat_inc(&zram->stats.bad_compress); + src = uncmem; + clen = PAGE_SIZE; + } handle = zs_malloc(zram->mem_pool, clen); if (!handle) { -- cgit v0.10.2 From 00b7dede8bc3881b29f2efbcae1355fc769252ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 22 Oct 2012 22:54:30 +0100 Subject: ARM: drop experimental status for hotplug and Thumb2 Both these features have been around for a long time now, and haven't had any recent issues brought up. So lets drop their experimental status. In any case, hotplugis selected by other non-experimental options which then cause a Kconfig warning. Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..35a26d4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1603,8 +1603,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1645,8 +1645,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND -- cgit v0.10.2 From 5de35e8d5c02d271c20e18337e01bc20e6ef472e Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 22 Oct 2012 18:01:19 -0400 Subject: ext4: Avoid underflow in ext4_trim_fs() Currently if len argument in ext4_trim_fs() is smaller than one block, the 'end' variable underflow. Avoid that by returning EINVAL if len is smaller than file system block. Also remove useless unlikely(). Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index eb1e385..f05d08e 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4990,8 +4990,9 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range) minlen = EXT4_NUM_B2C(EXT4_SB(sb), range->minlen >> sb->s_blocksize_bits); - if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) || - unlikely(start >= max_blks)) + if (minlen > EXT4_CLUSTERS_PER_GROUP(sb) || + start >= max_blks || + range->len < sb->s_blocksize) return -EINVAL; if (end >= max_blks) end = max_blks - 1; -- cgit v0.10.2 From 23d84ed9c81b6f09c270da00b00e8582fab7ca70 Mon Sep 17 00:00:00 2001 From: Vincent Penquerc'h Date: Tue, 9 Oct 2012 19:40:39 +0100 Subject: staging: omapdrm: fix allocation size for page addresses array Signed-off-by: Rob Clark Signed-off-by: Vincent Penquerc'h Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c index 3434e6e..66e2c2f 100644 --- a/drivers/staging/omapdrm/omap_gem.c +++ b/drivers/staging/omapdrm/omap_gem.c @@ -246,7 +246,7 @@ static int omap_gem_attach_pages(struct drm_gem_object *obj) * DSS, GPU, etc. are not cache coherent: */ if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) { - addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL); + addrs = kmalloc(npages * sizeof(*addrs), GFP_KERNEL); if (!addrs) { ret = -ENOMEM; goto free_pages; @@ -257,7 +257,7 @@ static int omap_gem_attach_pages(struct drm_gem_object *obj) 0, PAGE_SIZE, DMA_BIDIRECTIONAL); } } else { - addrs = kzalloc(npages * sizeof(addrs), GFP_KERNEL); + addrs = kzalloc(npages * sizeof(*addrs), GFP_KERNEL); if (!addrs) { ret = -ENOMEM; goto free_pages; -- cgit v0.10.2 From b3ca610a22c6f4708783b918ddbc22f4cb74589f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 11 Oct 2012 09:34:11 -0700 Subject: staging: ramster: depends on NET ramster uses network interfaces that are only present when CONFIG_NET is enabled, so it should depend on NET. Fixes these build errors: drivers/built-in.o: In function `sc_kref_release': tcp.c:(.text+0x24b9af): undefined reference to `sock_release' drivers/built-in.o: In function `r2net_open_listening_sock': tcp.c:(.text+0x24ca2b): undefined reference to `sock_create' tcp.c:(.text+0x24cb91): undefined reference to `sock_release' drivers/built-in.o: In function `r2net_recv_tcp_msg': tcp.c:(.text+0x24cdbd): undefined reference to `sock_recvmsg' drivers/built-in.o: In function `r2net_send_tcp_msg': tcp.c:(.text+0x24d341): undefined reference to `sock_sendmsg' drivers/built-in.o: In function `r2net_start_connect': tcp.c:(.text+0x24d8fa): undefined reference to `sock_create' drivers/built-in.o: In function `r2net_shutdown_sc': tcp.c:(.text+0x24e30c): undefined reference to `kernel_sock_shutdown' drivers/built-in.o: In function `r2net_accept_one': tcp.c:(.text+0x24f392): undefined reference to `sock_create_lite' tcp.c:(.text+0x24f3c3): undefined reference to `sock_release' drivers/built-in.o: In function `r2net_stop_listening': (.text+0x250f63): undefined reference to `sock_release' Signed-off-by: Randy Dunlap Cc: konrad.wilk@oracle.com Acked-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ramster/Kconfig b/drivers/staging/ramster/Kconfig index 843c541..3abf661 100644 --- a/drivers/staging/ramster/Kconfig +++ b/drivers/staging/ramster/Kconfig @@ -18,6 +18,7 @@ config ZCACHE2 config RAMSTER bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem" depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE2=y + depends on NET # must ensure struct page is 8-byte aligned select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT default n -- cgit v0.10.2 From 2978af545b9a1ed221e23fb24ae4559bec6ad70d Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 23 Oct 2012 00:53:58 +0200 Subject: ACPI: Fix memory leak in acpi_bind_one() Memory is allocated with kzalloc() and assigned to 'physical_node'. Then 'physical_node->node_id' is initialized with a call to 'find_first_zero_bit()', if that results in a value greater than ACPI_MAX_PHYSICAL_NODE we'll end up jumping to the 'err:' label and there leave the function and let 'physical_node' go out of scope and leak the memory we allocated. This patch fixes the leak by simply freeing the unused/unneeded memory pointed to by 'physical_node' just before we jump to 'err:'. [rjw: The problem has been introduced by commit 1033f90 (ACPI: Allow ACPI binding with USB-3.0 hub), which is new in 3.7-rc.] Signed-off-by: Jesper Juhl Reviewed-by: Toshi Kani Reviewed-by: Yasuaki Ishimatsu Acked-by: David Rientjes Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index d1a2d74..0837308 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -159,6 +159,7 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) { retval = -ENOSPC; mutex_unlock(&acpi_dev->physical_node_lock); + kfree(physical_node); goto err; } -- cgit v0.10.2 From debe081aaa4d247b9957ac2336d84deab32d9909 Mon Sep 17 00:00:00 2001 From: "jhbird.choi@samsung.com" Date: Tue, 23 Oct 2012 00:54:38 +0200 Subject: PM / Domains: Fix memory leak on error path in pm_genpd_attach_cpuidle If pm_genpd_attach_cpudidle failed we leak memory stored in 'cpu_data'. Signed-off-by: Jonghwan Choi Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index c22b869..96b71b6 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -1862,7 +1862,7 @@ int pm_genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state) cpuidle_drv = cpuidle_driver_ref(); if (!cpuidle_drv) { ret = -ENODEV; - goto out; + goto err_drv; } if (cpuidle_drv->state_count <= state) { ret = -EINVAL; @@ -1884,6 +1884,9 @@ int pm_genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state) err: cpuidle_driver_unref(); + + err_drv: + kfree(cpu_data); goto out; } -- cgit v0.10.2 From e4df1cbcc1f329e53a1fff7450b2229e0addff20 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 23 Oct 2012 00:55:10 +0200 Subject: cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code Commit 6889125b8b4e09c5e53e6ecab3433bed1ce198c9 (cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU) causes powernow-k8 to trigger a preempt warning, e.g.: BUG: using smp_processor_id() in preemptible [00000000] code: cpufreq/3776 caller is powernowk8_target+0x20/0x49 Pid: 3776, comm: cpufreq Not tainted 3.6.0 #9 Call Trace: [] debug_smp_processor_id+0xc7/0xe0 [] powernowk8_target+0x20/0x49 [] __cpufreq_driver_target+0x82/0x8a [] cpufreq_governor_performance+0x4e/0x54 [] __cpufreq_governor+0x8c/0xc9 [] __cpufreq_set_policy+0x1a9/0x21e [] store_scaling_governor+0x16f/0x19b [] ? cpufreq_update_policy+0x124/0x124 [] ? _raw_spin_unlock_irqrestore+0x2c/0x49 [] store+0x60/0x88 [] sysfs_write_file+0xf4/0x130 [] vfs_write+0xb5/0x151 [] sys_write+0x4a/0x71 [] system_call_fastpath+0x16/0x1b Fix this by by always using work_on_cpu(). Signed-off-by: Andreas Herrmann Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 129e80b..c16a3a5 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1052,14 +1052,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, .relation = relation }; - /* - * Must run on @pol->cpu. cpufreq core is responsible for ensuring - * that we're bound to the current CPU and pol->cpu stays online. - */ - if (smp_processor_id() == pol->cpu) - return powernowk8_target_fn(&pta); - else - return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); } /* Driver entry point to verify the policy and range of frequencies */ -- cgit v0.10.2 From 65bf7ca0005d7d827596d5df28583c83c9158da6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 22 Oct 2012 11:08:27 -0700 Subject: ARM: OMAP3: Beagle: fix OPP customization and initcall ordering After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+: PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered using an existing CPU device, not the omap_device for MPU-SS. First, fix the board file to use get_cpu_device() as required by the above commit, otherwise custom OPPs will be added to the wrong device. Second, the board files OPP init is called from the its init_machine method, and the generic CPU devices are not yet created when init_machine is run. Therefore OPP initialization will fail. To fix, use a device_initcall() for the board file's OPP customization, and make the device_initcall board-specific by using a machine_is check. Reported-by: Paul Walmsley Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431..d41ab98 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") -- cgit v0.10.2 From e37736777254ce1abc85493a5cacbefe5983b896 Mon Sep 17 00:00:00 2001 From: "Tu, Xiaobing" Date: Tue, 23 Oct 2012 01:03:00 +0200 Subject: Fix memory leak in cpufreq stats. When system enters sleep, non-boot CPUs will be disabled. Cpufreq stats sysfs is created when the CPU is up, but it is not freed when the CPU is going down. This will cause memory leak. Signed-off-by: xiaobing tu Signed-off-by: guifang tang Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index b40ee14..3998316 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -328,6 +328,7 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, cpufreq_update_policy(cpu); break; case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: cpufreq_stats_free_sysfs(cpu); break; case CPU_DEAD: -- cgit v0.10.2 From e0d78d08e3c06ebe2eb45b4d84f8cd5d1b13d371 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Sat, 20 Oct 2012 10:32:46 +0000 Subject: drm: fb: cma: Fix typo in debug message The debug message showing the resolution of a framebuffer to be allocated is missing a closing parenthesis. Signed-off-by: Thierry Reding Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c index 09e11a5..d6c80a3 100644 --- a/drivers/gpu/drm/drm_fb_cma_helper.c +++ b/drivers/gpu/drm/drm_fb_cma_helper.c @@ -206,7 +206,7 @@ static int drm_fbdev_cma_create(struct drm_fb_helper *helper, size_t size; int ret; - DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d\n", + DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n", sizes->surface_width, sizes->surface_height, sizes->surface_bpp); -- cgit v0.10.2 From 028132451667ffd25b6814d47a622ec03cb8cba7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Sat, 20 Oct 2012 10:32:47 +0000 Subject: drm: fb: cma: Fail gracefully on allocation failure The drm_gem_cma_create() function never returns NULL but rather an error encoded in the return value using the ERR_PTR() macro. Callers therefore need to check for errors using the IS_ERR() macro. This change allows drivers to handle contiguous DMA allocation failures gracefully. Signed-off-by: Thierry Reding Acked-by: Sascha Hauer Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c index d6c80a3..fd9d0af 100644 --- a/drivers/gpu/drm/drm_fb_cma_helper.c +++ b/drivers/gpu/drm/drm_fb_cma_helper.c @@ -220,7 +220,7 @@ static int drm_fbdev_cma_create(struct drm_fb_helper *helper, size = mode_cmd.pitches[0] * mode_cmd.height; obj = drm_gem_cma_create(dev, size); - if (!obj) + if (IS_ERR(obj)) return -ENOMEM; fbi = framebuffer_alloc(0, dev->dev); -- cgit v0.10.2 From 08bce0ac3bdc9d8e57d3f4b8edf3e787e623eccc Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 16 Oct 2012 21:47:35 +0000 Subject: drm/debugfs: remove redundant info from gem_names It's a relic of "drm: Convert proc files to seq_file and introduce debugfs", which wrongly converted DRM_INFO + sprintf to 2 seq_printfs. Signed-off-by: Marcin Slusarz Cc: Ben Gamari Cc: Eric Anholt Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c index 441ebc1..d4b20ce 100644 --- a/drivers/gpu/drm/drm_info.c +++ b/drivers/gpu/drm/drm_info.c @@ -205,8 +205,6 @@ static int drm_gem_one_name_info(int id, void *ptr, void *data) struct drm_gem_object *obj = ptr; struct seq_file *m = data; - seq_printf(m, "name %d size %zd\n", obj->name, obj->size); - seq_printf(m, "%6d %8zd %7d %8d\n", obj->name, obj->size, atomic_read(&obj->handle_count), -- cgit v0.10.2 From a16d4f86019a72b3e8cbb89abff769b25b53ab69 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 15 Oct 2012 18:03:42 +0000 Subject: drm: platform: Don't initialize driver-private data Platform device drivers usually use the driver-private data for their own purposes. Having it overwritten by drm_platform_init() is confusing and error-prone. Signed-off-by: Thierry Reding Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c index aaeb6f8..b8a282e 100644 --- a/drivers/gpu/drm/drm_platform.c +++ b/drivers/gpu/drm/drm_platform.c @@ -64,7 +64,6 @@ int drm_get_platform_dev(struct platform_device *platdev, } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - dev_set_drvdata(&platdev->dev, dev); ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL); if (ret) goto err_g1; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c index c71d493..1c350fc 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.c @@ -201,6 +201,8 @@ static int shmob_drm_load(struct drm_device *dev, unsigned long flags) goto done; } + platform_set_drvdata(pdev, sdev); + done: if (ret) shmob_drm_unload(dev); @@ -299,11 +301,9 @@ static struct drm_driver shmob_drm_driver = { #if CONFIG_PM_SLEEP static int shmob_drm_pm_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct drm_device *ddev = platform_get_drvdata(pdev); - struct shmob_drm_device *sdev = ddev->dev_private; + struct shmob_drm_device *sdev = dev_get_drvdata(dev); - drm_kms_helper_poll_disable(ddev); + drm_kms_helper_poll_disable(sdev->ddev); shmob_drm_crtc_suspend(&sdev->crtc); return 0; @@ -311,9 +311,7 @@ static int shmob_drm_pm_suspend(struct device *dev) static int shmob_drm_pm_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct drm_device *ddev = platform_get_drvdata(pdev); - struct shmob_drm_device *sdev = ddev->dev_private; + struct shmob_drm_device *sdev = dev_get_drvdata(dev); mutex_lock(&sdev->ddev->mode_config.mutex); shmob_drm_crtc_resume(&sdev->crtc); -- cgit v0.10.2 From 7bc17a7837bf4ec8fd2d63438c0b6b0160c454c1 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 22 Oct 2012 12:51:25 +0000 Subject: drm/ttm: Fix a theoretical race The ttm_mem_evict_first function could theoretically drop the lru lock without retrying if a reservation from off the LRU list ended up waiting. However, since currently there are no users that could cause a wait in that situation so this is not suitable for stable Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 402ab69..d42631c 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -817,11 +817,11 @@ retry: goto retry; } - ret = ttm_bo_reserve_locked(bo, false, no_wait_reserve, false, 0); + ret = ttm_bo_reserve_locked(bo, false, true, false, 0); if (unlikely(ret == -EBUSY)) { spin_unlock(&glob->lru_lock); - if (likely(!no_wait_gpu)) + if (likely(!no_wait_reserve)) ret = ttm_bo_wait_unreserved(bo, interruptible); kref_put(&bo->list_kref, ttm_bo_release_list); -- cgit v0.10.2 From b8e902f24fdd16c4373ddc37a4e150c4afe9c6db Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 22 Oct 2012 12:51:26 +0000 Subject: drm/ttm: Fix a theoretical race in ttm_bo_cleanup_refs() In theory, that function could release the lru lock between checking for bo on ddestroy list and a successful reserve if the bo was already reserved, and the function was called with waiting reserves allowed. However, all current reservers of a bo on the ddestroy list would atomically take the bo off the list after a successful reserve so this race should not have been hit, so no need to backport for stable. This patch also fixes a case found by Maarten Lankhorst where ttm_mem_evict_first called with no_wait_gpu would incorrectly spin waiting for bo idle if trying to evict a busy buffer that also sits on the ddestroy list. Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index d42631c..bf6e4b5 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -580,6 +580,7 @@ retry: if (unlikely(ret != 0)) return ret; +retry_reserve: spin_lock(&glob->lru_lock); if (unlikely(list_empty(&bo->ddestroy))) { @@ -587,14 +588,20 @@ retry: return 0; } - ret = ttm_bo_reserve_locked(bo, interruptible, - no_wait_reserve, false, 0); + ret = ttm_bo_reserve_locked(bo, false, true, false, 0); - if (unlikely(ret != 0)) { + if (unlikely(ret == -EBUSY)) { spin_unlock(&glob->lru_lock); - return ret; + if (likely(!no_wait_reserve)) + ret = ttm_bo_wait_unreserved(bo, interruptible); + if (unlikely(ret != 0)) + return ret; + + goto retry_reserve; } + BUG_ON(ret != 0); + /** * We can re-check for sync object without taking * the bo::lock since setting the sync object requires @@ -811,10 +818,7 @@ retry: no_wait_reserve, no_wait_gpu); kref_put(&bo->list_kref, ttm_bo_release_list); - if (likely(ret == 0 || ret == -ERESTARTSYS)) - return ret; - - goto retry; + return ret; } ret = ttm_bo_reserve_locked(bo, false, true, false, 0); -- cgit v0.10.2 From e408a9ff3c7c371d0e2a47a9eb8fa3de48fea30d Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:23 +0000 Subject: pch_gbe: create functions for MAC_RX {en,dis}able Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index b2a94d0..d5190bf 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -420,6 +420,22 @@ static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) return; } +static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw) +{ + u32 rctl; + /* Disables Receive MAC */ + rctl = ioread32(&hw->reg->MAC_RX_EN); + iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); +} + +static void pch_gbe_enable_mac_rx(struct pch_gbe_hw *hw) +{ + u32 rctl; + /* Enables Receive MAC */ + rctl = ioread32(&hw->reg->MAC_RX_EN); + iowrite32((rctl | PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); +} + /** * pch_gbe_mac_init_rx_addrs - Initialize receive address's * @hw: Pointer to the HW structure @@ -913,7 +929,7 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter) static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) { struct pch_gbe_hw *hw = &adapter->hw; - u32 rdba, rdlen, rctl, rxdma; + u32 rdba, rdlen, rxdma; pr_debug("dma adr = 0x%08llx size = 0x%08x\n", (unsigned long long)adapter->rx_ring->dma, @@ -921,9 +937,7 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) pch_gbe_mac_force_mac_fc(hw); - /* Disables Receive MAC */ - rctl = ioread32(&hw->reg->MAC_RX_EN); - iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); + pch_gbe_disable_mac_rx(hw); /* Disables Receive DMA */ rxdma = ioread32(&hw->reg->DMA_CTRL); @@ -1355,8 +1369,8 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw) rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma |= PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Enables Receive */ - iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); + + pch_gbe_enable_mac_rx(hw); return; } -- cgit v0.10.2 From 9c0314e111a540620441b27aeedb55f572f812f5 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:24 +0000 Subject: pch_gbe: don't re-set RX_FIFO_ERR flag in napi_poll If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index d5190bf..4ffad78 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -2419,7 +2419,6 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) int work_done = 0; bool poll_end_flag = false; bool cleaned = false; - u32 int_en; pr_debug("budget : %d\n", budget); @@ -2436,19 +2435,13 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (poll_end_flag) { napi_complete(napi); - if (adapter->rx_stop_flag) { - adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); - } pch_gbe_irq_enable(adapter); - } else - if (adapter->rx_stop_flag) { - adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); - int_en = ioread32(&adapter->hw.reg->INT_EN); - iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR), - &adapter->hw.reg->INT_EN); - } + } + + if (adapter->rx_stop_flag) { + adapter->rx_stop_flag = false; + pch_gbe_start_receive(&adapter->hw); + } pr_debug("poll_end_flag : %d work_done : %d budget : %d\n", poll_end_flag, work_done, budget); -- cgit v0.10.2 From a35279f002c5843c2b2faaa4538963c8eb18446c Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 22 Oct 2012 04:43:25 +0000 Subject: pch_gbe: don't reset MAC_RX on FIFO overflow Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 4ffad78..a8854d0 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -339,26 +339,6 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit) } /** - * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context - * @reg: Pointer of register - * @busy: Busy bit - */ -static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit) -{ - u32 tmp; - int ret = -1; - /* wait busy */ - tmp = 20; - while ((ioread32(reg) & bit) && --tmp) - udelay(5); - if (!tmp) - pr_err("Error: busy bit is not cleared\n"); - else - ret = 0; - return ret; -} - -/** * pch_gbe_mac_mar_set - Set MAC address register * @hw: Pointer to the HW structure * @addr: Pointer to the MAC address @@ -409,17 +389,6 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) return; } -static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) -{ - /* Read the MAC addresses. and store to the private data */ - pch_gbe_mac_read_mac_addr(hw); - iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); - pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); - /* Setup the MAC addresses */ - pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); - return; -} - static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw) { u32 rctl; @@ -1330,38 +1299,17 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } -static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter) +static void pch_gbe_disable_dma_rx(struct pch_gbe_hw *hw) { - struct pch_gbe_hw *hw = &adapter->hw; u32 rxdma; - u16 value; - int ret; /* Disable Receive DMA */ rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma &= ~PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Wait Rx DMA BUS is IDLE */ - ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK); - if (ret) { - /* Disable Bus master */ - pci_read_config_word(adapter->pdev, PCI_COMMAND, &value); - value &= ~PCI_COMMAND_MASTER; - pci_write_config_word(adapter->pdev, PCI_COMMAND, value); - /* Stop Receive */ - pch_gbe_mac_reset_rx(hw); - /* Enable Bus master */ - value |= PCI_COMMAND_MASTER; - pci_write_config_word(adapter->pdev, PCI_COMMAND, value); - } else { - /* Stop Receive */ - pch_gbe_mac_reset_rx(hw); - } - /* reprogram multicast address register after reset */ - pch_gbe_set_multi(adapter->netdev); } -static void pch_gbe_start_receive(struct pch_gbe_hw *hw) +static void pch_gbe_enable_dma_rx(struct pch_gbe_hw *hw) { u32 rxdma; @@ -1369,9 +1317,6 @@ static void pch_gbe_start_receive(struct pch_gbe_hw *hw) rxdma = ioread32(&hw->reg->DMA_CTRL); rxdma |= PCH_GBE_RX_DMA_EN; iowrite32(rxdma, &hw->reg->DMA_CTRL); - - pch_gbe_enable_mac_rx(hw); - return; } /** @@ -1407,7 +1352,7 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) int_en = ioread32(&hw->reg->INT_EN); iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR), &hw->reg->INT_EN); - pch_gbe_stop_receive(adapter); + pch_gbe_disable_dma_rx(&adapter->hw); int_st |= ioread32(&hw->reg->INT_ST); int_st = int_st & ioread32(&hw->reg->INT_EN); } @@ -2014,7 +1959,8 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); adapter->tx_queue_len = netdev->tx_queue_len; - pch_gbe_start_receive(&adapter->hw); + pch_gbe_enable_dma_rx(&adapter->hw); + pch_gbe_enable_mac_rx(&adapter->hw); mod_timer(&adapter->watchdog_timer, jiffies); @@ -2440,7 +2386,7 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (adapter->rx_stop_flag) { adapter->rx_stop_flag = false; - pch_gbe_start_receive(&adapter->hw); + pch_gbe_enable_dma_rx(&adapter->hw); } pr_debug("poll_end_flag : %d work_done : %d budget : %d\n", -- cgit v0.10.2 From 0b63bf1fe6f9ed1ec4148e8896f4522e08476b80 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 18 Oct 2012 22:11:38 +0200 Subject: MAINTAINERS: NETWORKING DRIVERS matches too much File pattern include/linux/*device.h matches too much, including completely unrelated files. Replace it with an explicit list of network device-related header files. Signed-off-by: Jean Delvare Cc: Joe Perches Acked-by: David S. Miller Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 41c5349..8184adb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5060,7 +5060,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git S: Odd Fixes F: drivers/net/ F: include/linux/if_* -F: include/linux/*device.h +F: include/linux/netdevice.h +F: include/linux/arcdevice.h +F: include/linux/etherdevice.h +F: include/linux/fcdevice.h +F: include/linux/fddidevice.h +F: include/linux/hippidevice.h +F: include/linux/inetdevice.h NETXEN (1/10) GbE SUPPORT M: Sony Chacko -- cgit v0.10.2 From ca749b2a2e72b39b3a46d1e4d096e338bf714a3c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 17 Oct 2012 22:17:35 +0200 Subject: usb: musb: dsps: fix res_name length The res_name is used for the name construction of a DT property as follows: sprintf(res_name, "port%d-mode", id); Hence, res_name must be at least 11 characters long in order to store the name including the terminating '\0'. While at it, use to snprintf() rather than sprintf() when accessing this buffer. Reported-by: David Binderman Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 444346e..ff5f112 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -458,11 +458,11 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct platform_device *musb; struct resource *res; struct resource resources[2]; - char res_name[10]; + char res_name[11]; int ret, musbid; /* get memory resource */ - sprintf(res_name, "musb%d", id); + snprintf(res_name, sizeof(res_name), "musb%d", id); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); if (!res) { dev_err(dev, "%s get mem resource failed\n", res_name); @@ -473,7 +473,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) resources[0] = *res; /* get irq resource */ - sprintf(res_name, "musb%d-irq", id); + snprintf(res_name, sizeof(res_name), "musb%d-irq", id); res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name); if (!res) { dev_err(dev, "%s get irq resource failed\n", res_name); @@ -530,7 +530,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); - sprintf(res_name, "port%d-mode", id); + snprintf(res_name, sizeof(res_name), "port%d-mode", id); of_property_read_u32(np, res_name, (u32 *)&pdata->mode); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); -- cgit v0.10.2 From 000b7f5127900f695668191353a3291832c1914e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 22 Oct 2012 13:51:11 +0800 Subject: usb: gadget: net2272: fix missing unlock on error in net2272_irq() Add the missing unlock on the error handle path in function net2272_irq(). Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 43ac748..c009263 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -2069,8 +2069,10 @@ static irqreturn_t net2272_irq(int irq, void *_dev) #if defined(PLX_PCI_RDK2) /* see if PCI int for us by checking irqstat */ intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); - if (!intcsr & (1 << NET2272_PCI_IRQ)) + if (!intcsr & (1 << NET2272_PCI_IRQ)) { + spin_unlock(&dev->lock); return IRQ_NONE; + } /* check dma interrupts */ #endif /* Platform/devcice interrupt handler */ -- cgit v0.10.2 From 37561f68bd527ec39076e32effdc7b1dcdfb17ea Mon Sep 17 00:00:00 2001 From: Jerry Chu Date: Mon, 22 Oct 2012 11:26:36 +0000 Subject: tcp: Reject invalid ack_seq to Fast Open sockets A packet with an invalid ack_seq may cause a TCP Fast Open socket to switch to the unexpected TCP_CLOSING state, triggering a BUG_ON kernel panic. When a FIN packet with an invalid ack_seq# arrives at a socket in the TCP_FIN_WAIT1 state, rather than discarding the packet, the current code will accept the FIN, causing state transition to TCP_CLOSING. This may be a small deviation from RFC793, which seems to say that the packet should be dropped. Unfortunately I did not expect this case for Fast Open hence it will trigger a BUG_ON panic. It turns out there is really nothing bad about a TFO socket going into TCP_CLOSING state so I could just remove the BUG_ON statements. But after some thought I think it's better to treat this case like TCP_SYN_RECV and return a RST to the confused peer who caused the unacceptable ack_seq to be generated in the first place. Signed-off-by: H.K. Jerry Chu Cc: Neal Cardwell Cc: Yuchung Cheng Acked-by: Yuchung Cheng Acked-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 036f857..1db6639 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5964,7 +5964,7 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, req = tp->fastopen_rsk; if (req != NULL) { - BUG_ON(sk->sk_state != TCP_SYN_RECV && + WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV && sk->sk_state != TCP_FIN_WAIT1); if (tcp_check_req(sk, skb, req, NULL, true) == NULL) @@ -6053,7 +6053,15 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, * ACK we have received, this would have acknowledged * our SYNACK so stop the SYNACK timer. */ - if (acceptable && req != NULL) { + if (req != NULL) { + /* Return RST if ack_seq is invalid. + * Note that RFC793 only says to generate a + * DUPACK for it but for TCP Fast Open it seems + * better to treat this case like TCP_SYN_RECV + * above. + */ + if (!acceptable) + return 1; /* We no longer need the request sock. */ reqsk_fastopen_remove(sk, req, false); tcp_rearm_rto(sk); diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index fc04711..d47c1b4 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -347,8 +347,8 @@ void tcp_retransmit_timer(struct sock *sk) return; } if (tp->fastopen_rsk) { - BUG_ON(sk->sk_state != TCP_SYN_RECV && - sk->sk_state != TCP_FIN_WAIT1); + WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV && + sk->sk_state != TCP_FIN_WAIT1); tcp_fastopen_synack_timer(sk); /* Before we receive ACK to our SYN-ACK don't retransmit * anything else (e.g., data or FIN segments). -- cgit v0.10.2 From 4f053a24eca933ec10ce68eef61d38d179f34e50 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 Oct 2012 23:31:33 -0700 Subject: usb: renesas_usbhs: fixup: avoid NULL access on error case pipe detach If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause, urb->ep will be NULL by usb time out. Then, host mode will access to it and crash kernel. This patch fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 9b69a13..069cd76 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -334,6 +334,11 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv, struct device *dev = usbhs_priv_to_dev(priv); unsigned long flags; + if (unlikely(!uep)) { + dev_err(dev, "no uep\n"); + return; + } + /******************** spin lock ********************/ usbhs_lock(priv, flags); -- cgit v0.10.2 From 1cb60156defa4f23d5318ea1ddd400f25b2d0ce5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 16 Oct 2012 23:33:30 -0700 Subject: usb: renesas_usbhs: fixup dma transfer stall renesas_usbhs driver can switch DMA/PIO transfer by using handler, and each handler have push/pop direction. But unfortunately, current dma push handler didn't a path which calls usbhs_pipe_enable(). Thus, dma transfer never happened. this patch fixes it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 143c4e9..c021b20 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -795,6 +795,7 @@ static void xfer_work(struct work_struct *work) dev_dbg(dev, " %s %d (%d/ %d)\n", fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); + usbhs_pipe_enable(pipe); usbhsf_dma_start(pipe, fifo); dma_async_issue_pending(chan); } -- cgit v0.10.2 From 0dc77b6dabec8fd298392018cc0de5214af2dc43 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 24 Sep 2012 15:32:31 +0900 Subject: extcon: Unregister compat class at module unload to fix oops If you compile extcon with CONFIG_ANDROID and then load and unload the module you get a simple oops as the driver does not unregister its compat class and thus cannot register it again. Full trace: root@(none):~# modprobe extcon_class root@(none):~# rmmod extcon_class root@(none):~# modprobe extcon_class ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100() sysfs: cannot create duplicate filename '/class/switch' Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451a00: [<602a58bc>] printk+0x0/0xa8 9f451a18: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451a28: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451a50: [<601d3d90>] strcat+0x0/0x40 9f451a68: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451a90: [<6002fe32>] unblock_signals+0x0/0x84 9f451ab0: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451ac0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ae8: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b00: [<601d3d90>] strcat+0x0/0x40 9f451b18: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b48: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451b78: [<6012c96f>] create_dir+0x8f/0x100 9f451bc0: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf396>] kobject_add_internal+0x96/0x280 9f451c60: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c367 ]--- ------------[ cut here ]------------ WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280() kobject_add_internal failed for switch with -EEXIST, don't try to register things with the same name in the same directory. Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451ad0: [<602a58bc>] printk+0x0/0xa8 9f451ae8: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451af8: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451b18: [<601cf140>] kobject_put+0x0/0x70 9f451b20: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451b38: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451b88: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451bc0: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451c60: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c368 ]--- kobject_create_and_add: kobject_add error: -17 ------------[ cut here ]------------ WARNING: at drivers/extcon/extcon_class.c:545 create_extcon_class+0xbc/0xd0 [extcon_class]() cannot allocate Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451c80: [<602a58bc>] printk+0x0/0xa8 9f451c98: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451ca0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ca8: [] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451cd0: [] extcon_class_init+0x0/0x12 [extcon_class] 9f451ce8: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451d20: [<6002fe32>] unblock_signals+0x0/0x84 9f451d28: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451d48: [<6002fffc>] set_signals+0x29/0x3f 9f451d58: [<601cf172>] kobject_put+0x32/0x70 9f451d78: [<600c22c3>] kfree+0xb3/0x100 9f451da8: [<601fbe9a>] class_compat_register+0x7a/0x80 9f451dc8: [] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451de8: [] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c369 ]--- FATAL: Error inserting extcon_class (/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko): Cannot allocate memory This patch fixes this. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 1ce76a8..63715cd 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -819,6 +819,9 @@ module_init(extcon_class_init); static void __exit extcon_class_exit(void) { +#if defined(CONFIG_ANDROID) + class_compat_unregister(switch_class); +#endif class_destroy(extcon_class); } module_exit(extcon_class_exit); -- cgit v0.10.2 From 824a1bc045cef278aec15bef35d8d0b59ce77856 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 24 Sep 2012 15:36:24 +0900 Subject: extcon: unregister compat link on cleanup Since extcon registers this compat link at device registration (extcon_dev_register), we should probably remove them at deregistration/cleanup. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 63715cd..54dc00b 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -570,6 +570,10 @@ static void extcon_cleanup(struct extcon_dev *edev, bool skip) kfree(edev->cables); } +#if defined(CONFIG_ANDROID) + if (switch_class) + class_compat_remove_link(switch_class, edev->dev, NULL); +#endif device_unregister(edev->dev); put_device(edev->dev); } -- cgit v0.10.2 From 5cd3c277ebc64e4bc30c5eb6412edd43b5730a4f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 26 Sep 2012 08:10:03 +0900 Subject: extcon: Fix return value in extcon_register_interest() Propagate the value returned from extcon_find_cable_index() instead of -ENODEV. For readability, -EINVAL is returned in place of the variable. Signed-off-by: Sachin Kamat Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 54dc00b..79f5dba 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -469,7 +469,7 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj, obj->cable_index = extcon_find_cable_index(obj->edev, cable_name); if (obj->cable_index < 0) - return -ENODEV; + return -EINVAL; obj->user_nb = nb; -- cgit v0.10.2 From 03019759b98de92b5507c8c2f6e253a35d59c868 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 2 Oct 2012 09:14:59 +0900 Subject: extcon: adc-jack: Fix checking return value of request_any_context_irq On failure, request_any_context_irq() returns a negative value. On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. Also ensure adc_jack_probe() return 0 on success. Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index 725eb5a..2cc6bec 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -161,13 +161,12 @@ static int __devinit adc_jack_probe(struct platform_device *pdev) err = request_any_context_irq(data->irq, adc_jack_irq_thread, pdata->irq_flags, pdata->name, data); - if (err) { + if (err < 0) { dev_err(&pdev->dev, "error: irq %d\n", data->irq); - err = -EINVAL; goto err_irq; } - goto out; + return 0; err_irq: extcon_dev_unregister(&data->edev); -- cgit v0.10.2 From d9310e35a8d5aefad73b2f2387503082da0bea04 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 2 Oct 2012 09:16:53 +0900 Subject: extcon: adc-jack: Add missing MODULE_LICENSE This driver can be built as a module, add MODULE_LICENSE for it. For completeness, also adds MODULE_AUTHOR and MODULE_DESCRIPTION. Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index 2cc6bec..e87196f 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -14,6 +14,7 @@ * */ +#include #include #include #include @@ -195,3 +196,7 @@ static struct platform_driver adc_jack_driver = { }; module_platform_driver(adc_jack_driver); + +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_DESCRIPTION("ADC Jack extcon driver"); +MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 909f9ec0a42eeff94dbcac226664d225a11f10d6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 4 Oct 2012 09:53:45 +0900 Subject: extcon: Fix kerneldoc for extcon_set_cable_state and extcon_set_cable_state_ Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 79f5dba..c27d58d 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -356,7 +356,7 @@ int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name) EXPORT_SYMBOL_GPL(extcon_get_cable_state); /** - * extcon_get_cable_state_() - Set the status of a specific cable. + * extcon_set_cable_state_() - Set the status of a specific cable. * @edev: the extcon device that has the cable. * @index: cable index that can be retrieved by extcon_find_cable_index(). * @cable_state: the new cable status. The default semantics is @@ -376,7 +376,7 @@ int extcon_set_cable_state_(struct extcon_dev *edev, EXPORT_SYMBOL_GPL(extcon_set_cable_state_); /** - * extcon_get_cable_state() - Set the status of a specific cable. + * extcon_set_cable_state() - Set the status of a specific cable. * @edev: the extcon device that has the cable. * @cable_name: cable name. * @cable_state: the new cable status. The default semantics is -- cgit v0.10.2 From bf2627d66d416ff438f37643d32866aa93947be6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 4 Oct 2012 09:55:23 +0900 Subject: extcon: max77693: Use max77693_update_reg for rmw operations This simplifies the code. Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index e21387e..e0ed622 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -239,25 +239,19 @@ const char *max77693_extcon_cable[] = { static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, enum max77693_muic_adc_debounce_time time) { - int ret = 0; - u8 ctrl3; + int ret; switch (time) { case ADC_DEBOUNCE_TIME_5MS: case ADC_DEBOUNCE_TIME_10MS: case ADC_DEBOUNCE_TIME_25MS: case ADC_DEBOUNCE_TIME_38_62MS: - ret = max77693_read_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL3, &ctrl3); - ctrl3 &= ~CONTROL3_ADCDBSET_MASK; - ctrl3 |= (time << CONTROL3_ADCDBSET_SHIFT); - - ret = max77693_write_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL3, ctrl3); - if (ret) { + ret = max77693_update_reg(info->max77693->regmap_muic, + MAX77693_MUIC_REG_CTRL3, + time << CONTROL3_ADCDBSET_SHIFT, + CONTROL3_ADCDBSET_MASK); + if (ret) dev_err(info->dev, "failed to set ADC debounce time\n"); - ret = -EINVAL; - } break; default: dev_err(info->dev, "invalid ADC debounce time\n"); -- cgit v0.10.2 From f8457d574f680a98c77846a15df13086ab1ab426 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 8 Oct 2012 14:41:49 +0900 Subject: extcon: MAX77693: Add platform data for MUIC device to initialize registers This patch add platform data for MUIC device to initialize register on probe() call because it should unmask interrupt mask register and initialize some register related to MUIC device. Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index e0ed622..cffeab6 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -651,6 +651,8 @@ out: static int __devinit max77693_muic_probe(struct platform_device *pdev) { struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); + struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev); + struct max77693_muic_platform_data *muic_pdata = pdata->muic_data; struct max77693_muic_info *info; int ret, i; u8 id; @@ -721,6 +723,31 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev) goto err_extcon; } + /* Initialize MUIC register by using platform data */ + for (i = 0 ; i < muic_pdata->num_init_data ; i++) { + enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR; + + max77693_write_reg(info->max77693->regmap_muic, + muic_pdata->init_data[i].addr, + muic_pdata->init_data[i].data); + + switch (muic_pdata->init_data[i].addr) { + case MAX77693_MUIC_REG_INTMASK1: + irq_src = MUIC_INT1; + break; + case MAX77693_MUIC_REG_INTMASK2: + irq_src = MUIC_INT2; + break; + case MAX77693_MUIC_REG_INTMASK3: + irq_src = MUIC_INT3; + break; + } + + if (irq_src < MAX77693_IRQ_GROUP_NR) + info->max77693->irq_masks_cur[irq_src] + = muic_pdata->init_data[i].data; + } + /* Check revision number of MUIC device*/ ret = max77693_read_reg(info->max77693->regmap_muic, MAX77693_MUIC_REG_ID, &id); diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index 1d28ae9..fe03b2d 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -30,7 +30,20 @@ #ifndef __LINUX_MFD_MAX77693_H #define __LINUX_MFD_MAX77693_H +struct max77693_reg_data { + u8 addr; + u8 data; +}; + +struct max77693_muic_platform_data { + struct max77693_reg_data *init_data; + int num_init_data; +}; + struct max77693_platform_data { int wakeup; + + /* muic data */ + struct max77693_muic_platform_data *muic_data; }; #endif /* __LINUX_MFD_MAX77693_H */ -- cgit v0.10.2 From 57e7cd37059bb00cd56b60b95b8799af0db91e18 Mon Sep 17 00:00:00 2001 From: anish kumar Date: Mon, 22 Oct 2012 09:43:33 +0900 Subject: extcon: driver model release call not needed There was a case where free and list_del can be called twice on the same pointer.So fixed it by re-arranging the code and removing a function which was not needed. Signed-off-by: anish kumar Signed-off-by: Chanwoo Choi Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index c27d58d..39d3e4d 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -545,47 +545,9 @@ static int create_extcon_class(void) return 0; } -static void extcon_cleanup(struct extcon_dev *edev, bool skip) -{ - mutex_lock(&extcon_dev_list_lock); - list_del(&edev->entry); - mutex_unlock(&extcon_dev_list_lock); - - if (!skip && get_device(edev->dev)) { - int index; - - if (edev->mutually_exclusive && edev->max_supported) { - for (index = 0; edev->mutually_exclusive[index]; - index++) - kfree(edev->d_attrs_muex[index].attr.name); - kfree(edev->d_attrs_muex); - kfree(edev->attrs_muex); - } - - for (index = 0; index < edev->max_supported; index++) - kfree(edev->cables[index].attr_g.name); - - if (edev->max_supported) { - kfree(edev->extcon_dev_type.groups); - kfree(edev->cables); - } - -#if defined(CONFIG_ANDROID) - if (switch_class) - class_compat_remove_link(switch_class, edev->dev, NULL); -#endif - device_unregister(edev->dev); - put_device(edev->dev); - } - - kfree(edev->dev); -} - static void extcon_dev_release(struct device *dev) { - struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev); - - extcon_cleanup(edev, true); + kfree(dev); } static const char *muex_name = "mutually_exclusive"; @@ -811,7 +773,40 @@ EXPORT_SYMBOL_GPL(extcon_dev_register); */ void extcon_dev_unregister(struct extcon_dev *edev) { - extcon_cleanup(edev, false); + int index; + + mutex_lock(&extcon_dev_list_lock); + list_del(&edev->entry); + mutex_unlock(&extcon_dev_list_lock); + + if (IS_ERR_OR_NULL(get_device(edev->dev))) { + dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n", + dev_name(edev->dev)); + return; + } + + if (edev->mutually_exclusive && edev->max_supported) { + for (index = 0; edev->mutually_exclusive[index]; + index++) + kfree(edev->d_attrs_muex[index].attr.name); + kfree(edev->d_attrs_muex); + kfree(edev->attrs_muex); + } + + for (index = 0; index < edev->max_supported; index++) + kfree(edev->cables[index].attr_g.name); + + if (edev->max_supported) { + kfree(edev->extcon_dev_type.groups); + kfree(edev->cables); + } + +#if defined(CONFIG_ANDROID) + if (switch_class) + class_compat_remove_link(switch_class, edev->dev, NULL); +#endif + device_unregister(edev->dev); + put_device(edev->dev); } EXPORT_SYMBOL_GPL(extcon_dev_unregister); -- cgit v0.10.2 From 44b7bccf7c5372eab3408593ab2142a5dcde03f6 Mon Sep 17 00:00:00 2001 From: anish kumar Date: Mon, 22 Oct 2012 10:11:43 +0900 Subject: extcon: trivial: kfree missed from remove path Extcon core doesn't free the memory when we do unregister. Kfree is added in the remove path as it was missing. Signed-off-by: anish kumar Signed-off-by: Chanwoo Choi Signed-off-by: MyungJoo Ham diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index cffeab6..a17d0d9 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -783,6 +783,7 @@ static int __devexit max77693_muic_remove(struct platform_device *pdev) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); extcon_dev_unregister(info->edev); + kfree(info->edev); kfree(info); return 0; -- cgit v0.10.2 From 4f2de3bf177e57417963eec6a131a7bb2d2b660d Mon Sep 17 00:00:00 2001 From: Jenny TC Date: Thu, 18 Oct 2012 21:00:32 +0900 Subject: extcon : register for cable interest by cable name There are some scnearios where a driver/framework needs to register interest for a particular cable without specifying the extcon device name. One such scenario is charger notifications. The platform will have charger cabel which will be bound to any extcon device. It's not mandatory for the charger driver to know which extcon device it should use. This patch enables the support for registering interest for a cable just by cable name wihtout specifying the extcon device name Signed-off-by: Jenny TC Signed-off-by: MyungJoo Ham Tested-by: Chanwoo Choi -- Kernel-doc comment added by MyungJoo Ham diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 39d3e4d..d398821 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -441,6 +441,8 @@ static int _call_per_cable(struct notifier_block *nb, unsigned long val, * extcon device. * @obj: an empty extcon_specific_cable_nb object to be returned. * @extcon_name: the name of extcon device. + * if NULL, extcon_register_interest will register + * every cable with the target cable_name given. * @cable_name: the target cable name. * @nb: the notifier block to get notified. * @@ -460,22 +462,44 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj, const char *extcon_name, const char *cable_name, struct notifier_block *nb) { - if (!obj || !extcon_name || !cable_name || !nb) + if (!obj || !cable_name || !nb) return -EINVAL; - obj->edev = extcon_get_extcon_dev(extcon_name); - if (!obj->edev) - return -ENODEV; + if (extcon_name) { + obj->edev = extcon_get_extcon_dev(extcon_name); + if (!obj->edev) + return -ENODEV; - obj->cable_index = extcon_find_cable_index(obj->edev, cable_name); - if (obj->cable_index < 0) - return -EINVAL; + obj->cable_index = extcon_find_cable_index(obj->edev, cable_name); + if (obj->cable_index < 0) + return -ENODEV; - obj->user_nb = nb; + obj->user_nb = nb; - obj->internal_nb.notifier_call = _call_per_cable; + obj->internal_nb.notifier_call = _call_per_cable; - return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb); + return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb); + } else { + struct class_dev_iter iter; + struct extcon_dev *extd; + struct device *dev; + + if (!extcon_class) + return -ENODEV; + class_dev_iter_init(&iter, extcon_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + extd = (struct extcon_dev *)dev_get_drvdata(dev); + + if (extcon_find_cable_index(extd, cable_name) < 0) + continue; + + class_dev_iter_exit(&iter); + return extcon_register_interest(obj, extd->name, + cable_name, nb); + } + + return -ENODEV; + } } /** -- cgit v0.10.2 From 268300be0e1a0b06582af55251294b268c3d4654 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 19 Oct 2012 17:06:54 +0200 Subject: pinctrl/nomadik: use irq_create_mapping() Since in the DT case, the linear domain path will not allocate descriptors for the IRQs, we need to use irq_create_mapping() for mapping hwirqs to Linux IRQs, so these descriptors get created on-the-fly in this case. ChangeLog v1->v2: - Just use irq_create_mapping() in the .to_irq function since this is called before unmasking or enabling any interrupt lines, so irq_find_mapping() should be sufficient for the IRQ handler function. Cc: Lee Jones Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 01aea1c..db5e0b3 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1056,7 +1056,7 @@ static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - return irq_find_mapping(nmk_chip->domain, offset); + return irq_create_mapping(nmk_chip->domain, offset); } #ifdef CONFIG_DEBUG_FS -- cgit v0.10.2 From b4dd784ba8af03bf1f9ee5118c792d7abd4919bd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 22 Oct 2012 12:58:09 +0800 Subject: pinctrl: fix missing unlock on error in pinctrl_groups_show() Add the missing unlock on the error handle path in function pinctrl_groups_show(). Cc: stable@kernel.org Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 0f1ec9e..2e39c04 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1061,8 +1061,10 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) seq_printf(s, "group: %s\n", gname); for (i = 0; i < num_pins; i++) { pname = pin_get_name(pctldev, pins[i]); - if (WARN_ON(!pname)) + if (WARN_ON(!pname)) { + mutex_unlock(&pinctrl_mutex); return -EINVAL; + } seq_printf(s, "pin %d (%s)\n", pins[i], pname); } seq_puts(s, "\n"); -- cgit v0.10.2 From 832b6cdf72fdc32cacba242a749402d28f4648f0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 23 Oct 2012 09:50:17 +0200 Subject: pinctrl/nomadik: use zero as default irq_start The irqdomain semantics were supposed to be such that a linear domain would be used if the passed first_irq was zero or negative, but I got it wrong so only passing zero as first_irq will work properly. Well, zero is NO_IRQ these days so let's pass zero. The semantics of irqdomain_add_simple() will be fixed in a separate patch. Acked-by: Lee Jones Reported-by: Rikard Olsson Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index db5e0b3..8bfbad6 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1281,7 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; - int irq_start = -1; + int irq_start = 0; int irq; int ret; -- cgit v0.10.2 From 38843e29217bc6b6fce80a5bf19d1636ee337c77 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 23 Oct 2012 11:44:42 +0200 Subject: pinctrl/nomadik: pass DT node to the irqdomain When creating the simple irqdomain, pass the DT node pointer along, as is apropriate. Acked-by: Lee Jones Reported-by: Gabriel Fernandez Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 8bfbad6..cf82d9c 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1387,7 +1387,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) if (!np) irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); - nmk_chip->domain = irq_domain_add_simple(NULL, + nmk_chip->domain = irq_domain_add_simple(np, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { -- cgit v0.10.2 From a9193983f4f292a82a00c72971c17ec0ee8c6c15 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 22 Oct 2012 12:55:55 +0200 Subject: drm/i915: fix overlay on i830M MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827 Cc: stable@vger.kernel.org Tested-by: Rhys Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index 4956259..d7bc817 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -341,9 +341,17 @@ static int intel_overlay_off(struct intel_overlay *overlay) intel_ring_emit(ring, flip_addr); intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); /* turn overlay off */ - intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); - intel_ring_emit(ring, flip_addr); - intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + if (IS_I830(dev)) { + /* Workaround: Don't disable the overlay fully, since otherwise + * it dies on the next OVERLAY_ON cmd. */ + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + } else { + intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); + intel_ring_emit(ring, flip_addr); + intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + } intel_ring_advance(ring); return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); -- cgit v0.10.2 From 7f6658ef35a470cd641ea35a1da409c4bc5bae1e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 23:26:29 +0200 Subject: drm/i915: VGA needs to be on pipe A on i830M The bit doesn't stick, and the output is always cloned from pipe A, even when it's supposed to scan out from pipe B. Shuts up annoying warnings from the modeset-rework, too. I've noticed that with this patch we know get and unknown connection state since the code can't find a suitable pipe for load detection. But that beats the previous state of affairs, where it tried to use pipe B, actually used pipe A and concluded that something is connected (although it's the LVDS on pipe A and nothing on the VGA connector on pipe B). I've tried to make load detect work by remapping the pipe->planes stuff, so that crtc 0 will use pipe B and hence we still have something left for load-detect on pipe A. But alas, that upset the hw a bit. So there's still some things to figure out, but this here will at least paper over some of the problems. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Acked-by: Chris Wilson [danvet: extend the commit message a bit with recent observations.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index f78061a..b726b47 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -729,7 +729,7 @@ void intel_crt_init(struct drm_device *dev) crt->base.type = INTEL_OUTPUT_ANALOG; crt->base.cloneable = true; - if (IS_HASWELL(dev)) + if (IS_HASWELL(dev) || IS_I830(dev)) crt->base.crtc_mask = (1 << 0); else crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); -- cgit v0.10.2 From 446c82fc44da5ae24a205d7130571614dc6969d3 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 18 Oct 2012 09:29:44 +0200 Subject: drivers: dma-contiguous: Don't redefine SZ_1M Use the definition from linux/sizes.h instead. Signed-off-by: Laurent Pinchart Signed-off-by: Marek Szyprowski diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 9a14694..612afcc 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -27,15 +27,12 @@ #include #include #include +#include #include #include #include #include -#ifndef SZ_1M -#define SZ_1M (1 << 20) -#endif - struct cma { unsigned long base_pfn; unsigned long count; -- cgit v0.10.2 From ba4d93bc9ea4510a145161f0af3537b4f380af01 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 18 Oct 2012 09:29:44 +0200 Subject: drivers: dma-coherent: Fix typo in dma_mmap_from_coherent documentation The function documentation incorrectly references dma_release_coherent. Fix it. Don't mention a specific function name as dma_mmap_from_coherent as multiple callers. Signed-off-by: Laurent Pinchart Signed-off-by: Marek Szyprowski diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c index 560a717..bc256b6 100644 --- a/drivers/base/dma-coherent.c +++ b/drivers/base/dma-coherent.c @@ -191,9 +191,8 @@ EXPORT_SYMBOL(dma_release_from_coherent); * This checks whether the memory was allocated from the per-device * coherent memory pool and if so, maps that memory to the provided vma. * - * Returns 1 if we correctly mapped the memory, or 0 if - * dma_release_coherent() should proceed with mapping memory from - * generic pools. + * Returns 1 if we correctly mapped the memory, or 0 if the caller should + * proceed with mapping memory from generic pools. */ int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma, void *vaddr, size_t size, int *ret) -- cgit v0.10.2 From 5e97f3f918c27c68c092bdca7917266615aec62f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 18 Oct 2012 09:29:44 +0200 Subject: drivers: cma: Fix wrong CMA selected region size default value Kconfig lists CMA_SIZE_SEL_ABSOLUTE as the default value fo the CMA selected region size, but that option isn't available in the defined choices. Set the default to CMA_SIZE_SEL_MBYTES instead. Signed-off-by: Laurent Pinchart Signed-off-by: Marek Szyprowski diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 08b4c52..b34b5cd 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -236,7 +236,7 @@ config CMA_SIZE_PERCENTAGE choice prompt "Selected region size" - default CMA_SIZE_SEL_ABSOLUTE + default CMA_SIZE_SEL_MBYTES config CMA_SIZE_SEL_MBYTES bool "Use mega bytes value only" -- cgit v0.10.2 From a1f102136538553a9488c713a336065ebb567542 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Tue, 23 Oct 2012 14:45:57 +0800 Subject: mm: cma: alloc_contig_range: return early for err path If start_isolate_page_range() failed, unset_migratetype_isolate() has been done inside it. Signed-off-by: Bob Liu Signed-off-by: Marek Szyprowski diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bb90971..b0012ab 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5825,7 +5825,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, ret = start_isolate_page_range(pfn_max_align_down(start), pfn_max_align_up(end), migratetype); if (ret) - goto done; + return ret; ret = __alloc_contig_migrate_range(&cc, start, end); if (ret) -- cgit v0.10.2 From 871ae57adc5ed092c1341f411514d0e8482e2611 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 22 Oct 2012 20:44:03 +0800 Subject: ARM: dma-mapping: support debug_dma_mapping_error Without the patch, kind of below warning will be dumped if DMA-API debug is enabled: [ 11.069763] ------------[ cut here ]------------ [ 11.074645] WARNING: at lib/dma-debug.c:948 check_unmap+0x770/0x860() [ 11.081420] ehci-omap ehci-omap.0: DMA-API: device driver failed to check map error[device address=0x0000000 0adb78e80] [size=8 bytes] [mapped as single] [ 11.095611] Modules linked in: Cc: Russell King Cc: Marek Szyprowski Signed-off-by: Ming Lei Signed-off-by: Marek Szyprowski diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2300484..78d8e9b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -91,6 +91,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { + debug_dma_mapping_error(dev, dma_addr); return dma_addr == DMA_ERROR_CODE; } -- cgit v0.10.2 From 213d27a42ce1646989966011d2af8563feac5635 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 5 Oct 2012 17:51:11 +0200 Subject: spi/pl022: Revert recent runtime PM changes [Originally sent by Ulf as two changes, squashed down into one with a redone changelog, thanks to Russell King for analysis. -- broonie] This reverts commit 688723 (spi/pl022: enable runtime PM) and commit 2fb30d (spi/pl022: fix spi-pl022 pm enable at probe). Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it interacted badly with the work Russell King had done to move core runtime PM handling into the bus. Due to that commit, "spi/pl022: fix spi-pl022 pm enable at probe" was merged to fix part of those issues. Instead of adding another fix, let's clean up and revert everything back to when it was already fine. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij Signed-off-by: Mark Brown Revert "spi/pl022: enable runtime PM" Conflicts: drivers/spi/spi-pl022.c diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 9194641..a1db91a 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2186,8 +2186,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); - pm_runtime_resume(dev); - pl022->clk = devm_clk_get(&adev->dev, NULL); if (IS_ERR(pl022->clk)) { status = PTR_ERR(pl022->clk); @@ -2292,7 +2290,6 @@ pl022_remove(struct amba_device *adev) clk_disable(pl022->clk); clk_unprepare(pl022->clk); - pm_runtime_disable(&adev->dev); amba_release_regions(adev); tasklet_disable(&pl022->pump_transfers); spi_unregister_master(pl022->master); -- cgit v0.10.2 From 57911b8ba814fae01306376a0d02bc7cdc88dc94 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 19 Oct 2012 09:22:03 +0200 Subject: Btrfs: don't put removals from push_node_left into tree mod log twice Independant of the check (push_items < src_items) tree_mod_log_eb_copy did log the removal of the old data entries from the source buffer. Therefore, we must not call tree_mod_log_eb_move if the check evaluates to true, as that would log the removal twice, finally resulting in (rewinded) buffers with wrong values for header_nritems. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index b334362..44a7e25 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1225,6 +1225,8 @@ tree_mod_log_rewind(struct btrfs_fs_info *fs_info, struct extent_buffer *eb, free_extent_buffer(eb); __tree_mod_log_rewind(eb_rewin, time_seq, tm); + WARN_ON(btrfs_header_nritems(eb_rewin) > + BTRFS_NODEPTRS_PER_BLOCK(fs_info->fs_root)); return eb_rewin; } @@ -1280,6 +1282,7 @@ get_old_root(struct btrfs_root *root, u64 time_seq) else WARN_ON(btrfs_header_level(eb) != 0); extent_buffer_get(eb); + WARN_ON(btrfs_header_nritems(eb) > BTRFS_NODEPTRS_PER_BLOCK(root)); return eb; } @@ -2970,8 +2973,10 @@ static int push_node_left(struct btrfs_trans_handle *trans, push_items * sizeof(struct btrfs_key_ptr)); if (push_items < src_nritems) { - tree_mod_log_eb_move(root->fs_info, src, 0, push_items, - src_nritems - push_items); + /* + * don't call tree_mod_log_eb_move here, key removal was already + * fully logged by tree_mod_log_eb_copy above. + */ memmove_extent_buffer(src, btrfs_node_key_ptr_offset(0), btrfs_node_key_ptr_offset(push_items), (src_nritems - push_items) * -- cgit v0.10.2 From ba1bfbd592c1adddd5d0005f587a6e308e25c949 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Mon, 22 Oct 2012 20:02:56 +0200 Subject: Btrfs: fix a tree mod logging issue for root replacement operations Avoid the implicit free by tree_mod_log_set_root_pointer, which is wrong in two places. Where needed, we call tree_mod_log_free_eb explicitly now. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 44a7e25..e6b75cc 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -647,8 +647,6 @@ tree_mod_log_insert_root(struct btrfs_fs_info *fs_info, if (tree_mod_dont_log(fs_info, NULL)) return 0; - __tree_mod_log_free_eb(fs_info, old_root); - ret = tree_mod_alloc(fs_info, flags, &tm); if (ret < 0) goto out; @@ -926,12 +924,7 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans, ret = btrfs_dec_ref(trans, root, buf, 1, 1); BUG_ON(ret); /* -ENOMEM */ } - /* - * don't log freeing in case we're freeing the root node, this - * is done by tree_mod_log_set_root_pointer later - */ - if (buf != root->node && btrfs_header_level(buf) != 0) - tree_mod_log_free_eb(root->fs_info, buf); + tree_mod_log_free_eb(root->fs_info, buf); clean_tree_block(trans, root, buf); *last_ref = 1; } @@ -1728,6 +1721,7 @@ static noinline int balance_level(struct btrfs_trans_handle *trans, goto enospc; } + tree_mod_log_free_eb(root->fs_info, root->node); tree_mod_log_set_root_pointer(root, child); rcu_assign_pointer(root->node, child); -- cgit v0.10.2 From 627072b06c362bbe7dc256f618aaa63351f0cfe6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 19 Oct 2012 11:43:11 -0400 Subject: arch/tile: avoid generating .eh_frame information in modules The tile tool chain uses the .eh_frame information for backtracing. The vmlinux build drops any .eh_frame sections at link time, but when present in kernel modules, it causes a module load failure due to the presence of unsupported pc-relative relocations. When compiling to use compiler feedback support, the compiler by default omits .eh_frame information, so we don't see this problem. But when not using feedback, we need to explicitly suppress the .eh_frame. Signed-off-by: Chris Metcalf Cc: stable@vger.kernel.org diff --git a/arch/tile/Makefile b/arch/tile/Makefile index 55640cf..3d15364 100644 --- a/arch/tile/Makefile +++ b/arch/tile/Makefile @@ -26,6 +26,10 @@ $(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH)) endif endif +# The tile compiler may emit .eh_frame information for backtracing. +# In kernel modules, this causes load failures due to unsupported relocations. +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables + ifneq ($(CONFIG_DEBUG_EXTRA_FLAGS),"") KBUILD_CFLAGS += $(CONFIG_DEBUG_EXTRA_FLAGS) endif -- cgit v0.10.2 From 7805963387ddd7c48bed8c87b6a5de26ac79299f Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 19 Oct 2012 16:29:43 -0400 Subject: arch/tile: avoid build warnings from duplicate ELF_R_xxx #defines These are now provided in , so clean up warnings by not re-defining them in module.c. Signed-off-by: Chris Metcalf Acked-by: Rusty Russell diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c index 001cbfa..243ffeb 100644 --- a/arch/tile/kernel/module.c +++ b/arch/tile/kernel/module.c @@ -24,16 +24,6 @@ #include #include -#ifdef __tilegx__ -# define Elf_Rela Elf64_Rela -# define ELF_R_SYM ELF64_R_SYM -# define ELF_R_TYPE ELF64_R_TYPE -#else -# define Elf_Rela Elf32_Rela -# define ELF_R_SYM ELF32_R_SYM -# define ELF_R_TYPE ELF32_R_TYPE -#endif - #ifdef MODULE_DEBUG #define DEBUGP printk #else -- cgit v0.10.2 From b6aa22db7857ab7ed042d6c56b800bfc727cfdff Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 16 Oct 2012 12:51:45 -0400 Subject: drm/radeon: add some new SI PCI ids Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c78bb99..af1cbaf 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -205,6 +205,8 @@ {0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ @@ -217,6 +219,7 @@ {0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ -- cgit v0.10.2 From 1518d7fb5d42aec6ec7349b3be8712af132b46fa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 17 Oct 2012 12:42:13 -0400 Subject: drm/radeon: fix sparse warning Reported-by: Fengguang Wu Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a7677dd..4f6b09e 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -577,7 +577,7 @@ void radeon_vm_manager_fini(struct radeon_device *rdev) * * Global and local mutex must be locked! */ -int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) +static int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) { struct radeon_vm *vm_evict; -- cgit v0.10.2 From 614499b4d844dcceae5ae2f1e53a2963789a8933 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 17 Oct 2012 17:20:24 -0400 Subject: drm/radeon: give each backlight a unique id In cases where we have multiple radeons with backlight controls. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=48941 Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 49cbb37..ba498f8 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -184,6 +184,7 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, struct radeon_backlight_privdata *pdata; struct radeon_encoder_atom_dig *dig; u8 backlight_level; + char bl_name[16]; if (!radeon_encoder->enc_priv) return; @@ -203,7 +204,9 @@ void radeon_atom_backlight_init(struct radeon_encoder *radeon_encoder, memset(&props, 0, sizeof(props)); props.max_brightness = RADEON_MAX_BL_LEVEL; props.type = BACKLIGHT_RAW; - bd = backlight_device_register("radeon_bl", &drm_connector->kdev, + snprintf(bl_name, sizeof(bl_name), + "radeon_bl%d", dev->primary->index); + bd = backlight_device_register(bl_name, &drm_connector->kdev, pdata, &radeon_atom_backlight_ops, &props); if (IS_ERR(bd)) { DRM_ERROR("Backlight registration failed\n"); diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index a13ad9d..0063df9 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -370,6 +370,7 @@ void radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder, struct backlight_properties props; struct radeon_backlight_privdata *pdata; uint8_t backlight_level; + char bl_name[16]; if (!radeon_encoder->enc_priv) return; @@ -389,7 +390,9 @@ void radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder, memset(&props, 0, sizeof(props)); props.max_brightness = RADEON_MAX_BL_LEVEL; props.type = BACKLIGHT_RAW; - bd = backlight_device_register("radeon_bl", &drm_connector->kdev, + snprintf(bl_name, sizeof(bl_name), + "radeon_bl%d", dev->primary->index); + bd = backlight_device_register(bl_name, &drm_connector->kdev, pdata, &radeon_backlight_ops, &props); if (IS_ERR(bd)) { DRM_ERROR("Backlight registration failed\n"); -- cgit v0.10.2 From c71721324c612f7f040657ce9917d87f530f9784 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Oct 2012 13:27:04 -0400 Subject: drm/radeon: add error output if VM CS fails on cayman So we know why the CS was rejected. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 573ed1b..30271b64 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -2829,6 +2829,7 @@ static bool evergreen_vm_reg_valid(u32 reg) case CAYMAN_SQ_EX_ALLOC_TABLE_SLOTS: return true; default: + DRM_ERROR("Invalid register 0x%x in CS\n", reg); return false; } } -- cgit v0.10.2 From 58f8cf56f937840aa3c1416eed29f595159c60a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 22 Oct 2012 17:42:35 +0200 Subject: drm/radeon: fix PFP sync in vm_flush MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise the next IB might start reading commands with the page table still invalid. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 8c74c72..19b7fe1 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1586,4 +1586,8 @@ void cayman_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) /* bits 0-7 are the VM contexts0-7 */ radeon_ring_write(ring, PACKET0(VM_INVALIDATE_REQUEST, 0)); radeon_ring_write(ring, 1 << vm->id); + + /* sync PFP to ME, otherwise we might get invalid PFP reads */ + radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0)); + radeon_ring_write(ring, 0x0); } diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index 2423d1b..cbef681 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -502,6 +502,7 @@ #define PACKET3_MPEG_INDEX 0x3A #define PACKET3_WAIT_REG_MEM 0x3C #define PACKET3_MEM_WRITE 0x3D +#define PACKET3_PFP_SYNC_ME 0x42 #define PACKET3_SURFACE_SYNC 0x43 # define PACKET3_CB0_DEST_BASE_ENA (1 << 6) # define PACKET3_CB1_DEST_BASE_ENA (1 << 7) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index df8dd77..da184de 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2868,6 +2868,10 @@ void si_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2); radeon_ring_write(ring, 0); radeon_ring_write(ring, 1 << vm->id); + + /* sync PFP to ME, otherwise we might get invalid PFP reads */ + radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0)); + radeon_ring_write(ring, 0x0); } /* -- cgit v0.10.2 From f9fdffa51dff6744726507c641d8151fadbc7cd7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 22 Oct 2012 17:42:36 +0200 Subject: drm/radeon: fix cayman_vm_set_page v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Handle requests that won't fit into a single packet. v2: pe needs to increase as well. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 19b7fe1..81e6a56 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1538,26 +1538,31 @@ void cayman_vm_set_page(struct radeon_device *rdev, uint64_t pe, { struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index]; uint32_t r600_flags = cayman_vm_page_flags(rdev, flags); - int i; - radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, 1 + count * 2)); - radeon_ring_write(ring, pe); - radeon_ring_write(ring, upper_32_bits(pe) & 0xff); - for (i = 0; i < count; ++i) { - uint64_t value = 0; - if (flags & RADEON_VM_PAGE_SYSTEM) { - value = radeon_vm_map_gart(rdev, addr); - value &= 0xFFFFFFFFFFFFF000ULL; - addr += incr; - - } else if (flags & RADEON_VM_PAGE_VALID) { - value = addr; - addr += incr; - } + while (count) { + unsigned ndw = 1 + count * 2; + if (ndw > 0x3FFF) + ndw = 0x3FFF; + + radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, ndw)); + radeon_ring_write(ring, pe); + radeon_ring_write(ring, upper_32_bits(pe) & 0xff); + for (; ndw > 1; ndw -= 2, --count, pe += 8) { + uint64_t value = 0; + if (flags & RADEON_VM_PAGE_SYSTEM) { + value = radeon_vm_map_gart(rdev, addr); + value &= 0xFFFFFFFFFFFFF000ULL; + addr += incr; + + } else if (flags & RADEON_VM_PAGE_VALID) { + value = addr; + addr += incr; + } - value |= r600_flags; - radeon_ring_write(ring, value); - radeon_ring_write(ring, upper_32_bits(value)); + value |= r600_flags; + radeon_ring_write(ring, value); + radeon_ring_write(ring, upper_32_bits(value)); + } } } -- cgit v0.10.2 From d7025d893897da3e2c26943c57e40d2296146f82 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 22 Oct 2012 17:42:37 +0200 Subject: drm/radeon: fix si_set_page v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Handle requests that won't fit into a single packet. v2: pe needs to increase as well. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index da184de..b0db712 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2808,26 +2808,31 @@ void si_vm_set_page(struct radeon_device *rdev, uint64_t pe, { struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index]; uint32_t r600_flags = cayman_vm_page_flags(rdev, flags); - int i; - uint64_t value; - radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 2 + count * 2)); - radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) | - WRITE_DATA_DST_SEL(1))); - radeon_ring_write(ring, pe); - radeon_ring_write(ring, upper_32_bits(pe)); - for (i = 0; i < count; ++i) { - if (flags & RADEON_VM_PAGE_SYSTEM) { - value = radeon_vm_map_gart(rdev, addr); - value &= 0xFFFFFFFFFFFFF000ULL; - } else if (flags & RADEON_VM_PAGE_VALID) - value = addr; - else - value = 0; - addr += incr; - value |= r600_flags; - radeon_ring_write(ring, value); - radeon_ring_write(ring, upper_32_bits(value)); + while (count) { + unsigned ndw = 2 + count * 2; + if (ndw > 0x3FFE) + ndw = 0x3FFE; + + radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, ndw)); + radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) | + WRITE_DATA_DST_SEL(1))); + radeon_ring_write(ring, pe); + radeon_ring_write(ring, upper_32_bits(pe)); + for (; ndw > 2; ndw -= 2, --count, pe += 8) { + uint64_t value; + if (flags & RADEON_VM_PAGE_SYSTEM) { + value = radeon_vm_map_gart(rdev, addr); + value &= 0xFFFFFFFFFFFFF000ULL; + } else if (flags & RADEON_VM_PAGE_VALID) + value = addr; + else + value = 0; + addr += incr; + value |= r600_flags; + radeon_ring_write(ring, value); + radeon_ring_write(ring, upper_32_bits(value)); + } } } -- cgit v0.10.2 From 204a393c5b88106d7485e20ec834add1013e410a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 22 Oct 2012 17:42:38 +0200 Subject: drm/radeon: remove set_page check from VM code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's better to handle this in the chipset specific code. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 4f6b09e..926dc9d 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -1036,8 +1036,7 @@ static void radeon_vm_update_ptes(struct radeon_device *rdev, pte = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]); pte += (addr & mask) * 8; - if (((last_pte + 8 * count) != pte) || - ((count + nptes) > 1 << 11)) { + if ((last_pte + 8 * count) != pte) { if (count) { radeon_asic_vm_set_page(rdev, last_pte, -- cgit v0.10.2 From 08eda32b13c045b6219464764d6028d86d3c58a8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 22 Oct 2012 17:42:39 +0200 Subject: drm/radeon: fix header size estimation in VM code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only NI uses 3dw headers, SI uses 4dw headers. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 926dc9d..e9e8953 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -1147,17 +1147,17 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, if (RADEON_VM_BLOCK_SIZE > 11) /* reserve space for one header for every 2k dwords */ - ndw += (nptes >> 11) * 3; + ndw += (nptes >> 11) * 4; else /* reserve space for one header for every (1 << BLOCK_SIZE) entries */ - ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 3; + ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 4; /* reserve space for pte addresses */ ndw += nptes * 2; /* reserve space for one header for every 2k dwords */ - ndw += (npdes >> 11) * 3; + ndw += (npdes >> 11) * 4; /* reserve space for pde addresses */ ndw += npdes * 2; -- cgit v0.10.2 From 3cf164c8dee834cef9dac4e7325f89a207339ac8 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 21 Oct 2012 14:59:22 +0000 Subject: mlx4_core: Remove annoying debug messages from SR-IOV flow These debug prints left behind by commits c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests"), 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") and 993c401e2079 ("mlx4_core: Add IB port-state machine and port mgmt event propagation") make it pretty hard to actually use the mlx4_core debug messages when running in SRIOV/IB mode -- for example, the module load sequence of a device with one VF yielded 631 debug prints, with 408 of them being from this set. Let's just remove them. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 51c7649..194221b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -329,9 +329,6 @@ int set_and_calc_slave_port_state(struct mlx4_dev *dev, int slave, ctx = &priv->mfunc.master.slave_state[slave]; spin_lock_irqsave(&ctx->lock, flags); - mlx4_dbg(dev, "%s: slave: %d, current state: %d new event :%d\n", - __func__, slave, cur_state, event); - switch (cur_state) { case SLAVE_PORT_DOWN: if (MLX4_PORT_STATE_DEV_EVENT_PORT_UP == event) @@ -366,9 +363,6 @@ int set_and_calc_slave_port_state(struct mlx4_dev *dev, int slave, goto out; } ret = mlx4_get_slave_port_state(dev, slave, port); - mlx4_dbg(dev, "%s: slave: %d, current state: %d new event" - " :%d gen_event: %d\n", - __func__, slave, cur_state, event, *gen_event); out: spin_unlock_irqrestore(&ctx->lock, flags); diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 926c911..b05705f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -330,9 +330,6 @@ static void update_pkey_index(struct mlx4_dev *dev, int slave, new_index = priv->virt2phys_pkey[slave][port - 1][orig_index]; *(u8 *)(inbox->buf + 35) = new_index; - - mlx4_dbg(dev, "port = %d, orig pkey index = %d, " - "new pkey index = %d\n", port, orig_index, new_index); } static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox, @@ -351,9 +348,6 @@ static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox, if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) qp_ctx->alt_path.mgid_index = slave & 0x7F; } - - mlx4_dbg(dev, "slave %d, new gid index: 0x%x ", - slave, qp_ctx->pri_path.mgid_index); } static int mpt_mask(struct mlx4_dev *dev) -- cgit v0.10.2 From 41929ed2656bab8af1734bf5d0088385e72e294f Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Sun, 21 Oct 2012 14:59:23 +0000 Subject: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails Fixed the resource cleanup to act correctly and prevent a kernel oops when mlx4_QUERY_ADAPTER() fails. Signed-off-by: Dotan Barak Reviewed-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 80df2ab..2aa80af 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1405,7 +1405,10 @@ unmap_bf: unmap_bf_area(dev); err_close: - mlx4_close_hca(dev); + if (mlx4_is_slave(dev)) + mlx4_slave_exit(dev); + else + mlx4_CLOSE_HCA(dev, 0); err_free_icm: if (!mlx4_is_slave(dev)) -- cgit v0.10.2 From bb698ca41ba574b3066ebbc5766e5980ae0051ca Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Wed, 10 Oct 2012 21:10:42 +0200 Subject: can: flexcan: disable bus error interrupts for the i.MX6q This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang Cc: Shawn Guo Signed-off-by: Wolfgang Grandegger [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index c78ecfc..a412bf6 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -144,9 +144,22 @@ #define FLEXCAN_MB_CODE_MASK (0xf0ffffff) -/* FLEXCAN hardware feature flags */ +/* + * FLEXCAN hardware feature flags + * + * Below is some version info we got: + * SOC Version IP-Version Glitch- [TR]WRN_INT + * Filter? connected? + * MX25 FlexCAN2 03.00.00.00 no no + * MX28 FlexCAN2 03.00.04.00 yes yes + * MX35 FlexCAN2 03.00.00.00 no no + * MX53 FlexCAN2 03.00.00.00 yes no + * MX6s FlexCAN3 10.00.12.00 yes yes + * + * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. + */ #define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */ -#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* Broken error state handling */ +#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */ /* Structure of the message buffer */ struct flexcan_mb { @@ -205,7 +218,7 @@ static struct flexcan_devtype_data fsl_p1010_devtype_data = { }; static struct flexcan_devtype_data fsl_imx28_devtype_data; static struct flexcan_devtype_data fsl_imx6q_devtype_data = { - .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_BROKEN_ERR_STATE, + .features = FLEXCAN_HAS_V10_FEATURES, }; static const struct can_bittiming_const flexcan_bittiming_const = { -- cgit v0.10.2 From 8e42e0a23d30ba84d8e946042ee82aac4934048a Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 13:01:46 -0700 Subject: block: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Jens Axboe Signed-off-by: Kees Cook Signed-off-by: Jens Axboe diff --git a/block/Kconfig b/block/Kconfig index 09acf1b..a7e40a7 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -89,7 +89,7 @@ config BLK_DEV_INTEGRITY config BLK_DEV_THROTTLING bool "Block layer bio throttling support" - depends on BLK_CGROUP=y && EXPERIMENTAL + depends on BLK_CGROUP=y default n ---help--- Block layer bio throttling support. It can be used to limit -- cgit v0.10.2 From b8977285ecb0033b0bd9a99d4355f9c0bc8708f1 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 14:01:51 -0600 Subject: drivers/block: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Greg Kroah-Hartman CC: Asai Thambi S P CC: Pete Zaitcev CC: Cong Wang CC: Jens Axboe Signed-off-by: Kees Cook Signed-off-by: Jens Axboe diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index f529407..6983a65 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -166,8 +166,8 @@ config BLK_DEV_DAC960 module will be called DAC960. config BLK_DEV_UMEM - tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + tristate "Micro Memory MM5415 Battery Backed RAM support" + depends on PCI ---help--- Saying Y here will include support for the MM5415 family of battery backed (Non-volatile) RAM cards. @@ -430,8 +430,8 @@ config CDROM_PKTCDVD_BUFFERS a disc is opened for writing. config CDROM_PKTCDVD_WCACHE - bool "Enable write caching (EXPERIMENTAL)" - depends on CDROM_PKTCDVD && EXPERIMENTAL + bool "Enable write caching" + depends on CDROM_PKTCDVD help If enabled, write caching will be set for the CD-R/W device. For now this option is dangerous unless the CD-RW media is known good, as we @@ -508,8 +508,8 @@ config XEN_BLKDEV_BACKEND config VIRTIO_BLK - tristate "Virtio block driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && VIRTIO + tristate "Virtio block driver" + depends on VIRTIO ---help--- This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. @@ -528,7 +528,7 @@ config BLK_DEV_HD config BLK_DEV_RBD tristate "Rados block device (RBD)" - depends on INET && EXPERIMENTAL && BLOCK + depends on INET && BLOCK select CEPH_LIB select LIBCRC32C select CRYPTO_AES -- cgit v0.10.2 From 966e7a854177097083683176ced871558b631a12 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 17 Oct 2012 12:17:50 +0200 Subject: xhci: endianness xhci_calculate_intel_u2_timeout An le16 is accessed without conversion. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum Signed-off-by: Sarah Sharp CC: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7d462bf..8d3c454 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4142,7 +4142,7 @@ static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev, (xhci_service_interval_to_ns(desc) > timeout_ns)) timeout_ns = xhci_service_interval_to_ns(desc); - u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000; + u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL; if (u2_del_ns > timeout_ns) timeout_ns = u2_del_ns; -- cgit v0.10.2 From 16b45fdf9c4e82f5d3bc53aa70737650e7c8d5ed Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 17 Oct 2012 10:16:16 +0200 Subject: xhci: fix integer overflow xhci_service_interval_to_ns() returns long long to avoid an overflow. However, the type cast happens too late. The fix is to force ULL from the beginning. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum Signed-off-by: Sarah Sharp CC: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8d3c454..9ec9396 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4021,7 +4021,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) static unsigned long long xhci_service_interval_to_ns( struct usb_endpoint_descriptor *desc) { - return (1 << (desc->bInterval - 1)) * 125 * 1000; + return (1ULL << (desc->bInterval - 1)) * 125 * 1000; } static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, -- cgit v0.10.2 From 12ac7f9e117facfe128d6e569953fa73d2d676b3 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 23 Oct 2012 18:58:21 -0700 Subject: ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 Add dmtimer clock aliases for AM33XX devices so that the parent clock for the dmtimer can be set correctly by the dmtimer driver. Without these clock aliases the dmtimer driver will fail to find the parent clocks for the dmtimer. Verified that DMTIMERs can be successfully requested on AM335x beagle bone. Original patch was provided by Vaibhav Hiremath [1]. Changelog and additional verification performed by Jon Hunter. [1] http://marc.info/?l=linux-omap&m=134693631608018&w=2 Signed-off-by: Vaibhav Hiremath Signed-off-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b..1a45d6b 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) -- cgit v0.10.2 From 3185bd26188223195dc2e659a3d00219cad71a0f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 20 Oct 2012 15:52:23 +0100 Subject: alpha: separate thread-synchronous flags ... and fix the race in updating unaligned control ones Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 4554ecb..1f8c729 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -7,6 +7,7 @@ #include #include #include +#include #endif #ifndef __ASSEMBLY__ @@ -21,6 +22,7 @@ struct thread_info { mm_segment_t addr_limit; /* thread address space */ unsigned cpu; /* current CPU */ int preempt_count; /* 0 => preemptable, <0 => BUG */ + unsigned int status; /* thread-synchronous flags */ int bpt_nsaved; unsigned long bpt_addr[2]; /* breakpoint handling */ @@ -63,8 +65,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); * - these are process state flags and used from assembly * - pending work-to-be-done flags come first and must be assigned to be * within bits 0 to 7 to fit in and immediate operand. - * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned - * control flags. * * TIF_SYSCALL_TRACE is known to be 0 via blbs. */ @@ -72,18 +72,12 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ #define TIF_SIGPENDING 2 /* signal pending */ #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */ #define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ -#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */ -#define TIF_UAC_NOFIX 11 /* ! flags as they match */ -#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ -#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define _TIF_SYSCALL_TRACE (1<flags = ((task_thread_info(task)->flags & \ - ~ALPHA_UAC_MASK) \ - | (((value) << ALPHA_UAC_SHIFT) & (1<status & TS_POLLING) + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags)); +} +static inline void clear_restore_sigmask(void) +{ + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; +} +static inline bool test_restore_sigmask(void) +{ + return current_thread_info()->status & TS_RESTORE_SIGMASK; +} +static inline bool test_and_clear_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + if (!(ti->status & TS_RESTORE_SIGMASK)) + return false; + ti->status &= ~TS_RESTORE_SIGMASK; + return true; +} +#endif + +#define SET_UNALIGN_CTL(task,value) ({ \ + __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \ + if (value & PR_UNALIGN_NOPRINT) \ + status |= TS_UAC_NOPRINT; \ + if (value & PR_UNALIGN_SIGBUS) \ + status |= TS_UAC_SIGBUS; \ + if (value & 4) /* alpha-specific */ \ + status |= TS_UAC_NOFIX; \ + task_thread_info(task)->status = status; \ 0; }) #define GET_UNALIGN_CTL(task,value) ({ \ - put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\ - >> ALPHA_UAC_SHIFT \ - | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\ - >> (ALPHA_UAC_SHIFT + 1) \ - | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\ - >> (ALPHA_UAC_SHIFT - 1), \ - (int __user *)(value)); \ + __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \ + __u32 res = 0; \ + if (status & TS_UAC_NOPRINT) \ + res |= PR_UNALIGN_NOPRINT; \ + if (status & TS_UAC_SIGBUS) \ + res |= PR_UNALIGN_SIGBUS; \ + if (status & TS_UAC_NOFIX) \ + res |= 4; \ + put_user(res, (int __user *)(value)); \ }) -#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG) - #endif /* __KERNEL__ */ #endif /* _ALPHA_THREAD_INFO_H */ diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 9eb0905..1e6956a 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -793,8 +793,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, case GSI_UACPROC: if (nbytes < sizeof(unsigned int)) return -EINVAL; - w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) & - UAC_BITMASK; + w = current_thread_info()->status & UAC_BITMASK; if (put_user(w, (unsigned int __user *)buffer)) return -EFAULT; return 1; @@ -904,24 +903,20 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, break; case SSI_NVPAIRS: { - unsigned long v, w, i; - unsigned int old, new; + unsigned __user *p = buffer; + unsigned i; - for (i = 0; i < nbytes; ++i) { + for (i = 0, p = buffer; i < nbytes; ++i, p += 2) { + unsigned v, w, status; - if (get_user(v, 2*i + (unsigned int __user *)buffer)) - return -EFAULT; - if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer)) + if (get_user(v, p) || get_user(w, p + 1)) return -EFAULT; switch (v) { case SSIN_UACPROC: - again: - old = current_thread_info()->flags; - new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT); - new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT; - if (cmpxchg(¤t_thread_info()->flags, - old, new) != old) - goto again; + w &= UAC_BITMASK; + status = current_thread_info()->status; + status = (status & ~UAC_BITMASK) | w; + current_thread_info()->status = status; break; default: diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 4054e0f..51987dc 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -49,7 +49,7 @@ EXPORT_SYMBOL(pm_power_off); void cpu_idle(void) { - set_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status |= TS_POLLING; while (1) { /* FIXME -- EV6 and LCA45 know how to power down diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index 80d987c..272666d 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -780,17 +780,17 @@ do_entUnaUser(void __user * va, unsigned long opcode, /* Check the UAC bits to decide what the user wants us to do with the unaliged access. */ - if (!test_thread_flag (TIF_UAC_NOPRINT)) { + if (!(current_thread_info()->status & TS_UAC_NOPRINT)) { if (__ratelimit(&ratelimit)) { printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n", current->comm, task_pid_nr(current), regs->pc - 4, va, opcode, reg); } } - if (test_thread_flag (TIF_UAC_SIGBUS)) + if ((current_thread_info()->status & TS_UAC_SIGBUS)) goto give_sigbus; /* Not sure why you'd want to use this, but... */ - if (test_thread_flag (TIF_UAC_NOFIX)) + if ((current_thread_info()->status & TS_UAC_NOFIX)) return; /* Don't bother reading ds in the access check since we already -- cgit v0.10.2 From 197ef5ef37d91686545872703bb6d756a53898ea Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 23 Oct 2012 20:29:15 -0400 Subject: USB: Add missing license tag to ezusb driver. ezusb: module license 'unspecified' taints kernel Signed-off-by: Dave Jones Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c index 4223d76..6589268 100644 --- a/drivers/usb/misc/ezusb.c +++ b/drivers/usb/misc/ezusb.c @@ -158,3 +158,4 @@ int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, } EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 036546bf950b7916dcc051eb0d450e23028b487a Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Tue, 23 Oct 2012 11:33:12 +0300 Subject: usb hub: use flush_work instead of flush_work_sync flush_work_sync and flush_work are now the same and flush_work_sync has been deprecated. This fixes the following warning: drivers/usb/core/hub.c: In function hub_quiesce: drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations] Reported-by: Fengguang Wu Signed-off-by: Octavian Purdila Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1181e91..1af04bd 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1213,7 +1213,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); if (hub->tt.hub) - flush_work_sync(&hub->tt.clear_work); + flush_work(&hub->tt.clear_work); } /* caller has locked the hub device */ -- cgit v0.10.2 From 720dfd250e48a8c7fd1b2b8645955413989c4ee0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 21 Oct 2012 19:58:30 +0800 Subject: dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc() Add the missing unlock on the error handling path in function imxdma_xfer_desc(). Signed-off-by: Wei Yongjun Cc: stable Signed-off-by: Vinod Koul diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index f11b5b2..7d9554c 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -474,8 +474,10 @@ static int imxdma_xfer_desc(struct imxdma_desc *d) slot = i; break; } - if (slot < 0) + if (slot < 0) { + spin_unlock_irqrestore(&imxdma->lock, flags); return -EBUSY; + } imxdma->slots_2d[slot].xsr = d->x; imxdma->slots_2d[slot].ysr = d->y; -- cgit v0.10.2 From c57d75c099e55500b620f50a207e61b9e20ecd29 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 23 Oct 2012 10:17:05 +0200 Subject: gpio: mvebu: correctly set the value in direction_output() The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 902af43..1bb43e3 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -244,6 +244,8 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, if (ret) return ret; + mvebu_gpio_set(chip, pin, value); + spin_lock_irqsave(&mvchip->lock, flags); u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)); u &= ~(1 << pin); -- cgit v0.10.2 From 3dd7ea922051e68854e016cfd2992226cfb5bb43 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 24 Oct 2012 14:09:14 +0900 Subject: ARM: dma-mapping: fix build warning in __dma_alloc() Fix build warning in __dma_alloc() as below: arch/arm/mm/dma-mapping.c: In function '__dma_alloc': arch/arm/mm/dma-mapping.c:653:29: warning: 'page' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Jingoo Han Signed-off-by: Marek Szyprowski diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d2..58bc3e4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG -- cgit v0.10.2 From 4e85fb831aa210fd1c5e2cb7909ac203c1f5b67f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 18 Oct 2012 09:29:44 +0200 Subject: ARM: mm: Remove unused arm_vmregion priv field Commit e9da6e9905e639b0f842a244bc770b48ad0523e9 ("ARM: dma-mapping: remove custom consistent dma region") removed the last users of the field. Remove it. Signed-off-by: Laurent Pinchart Signed-off-by: Marek Szyprowski diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c3..0f5a5f2 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; -- cgit v0.10.2 From bffd5fc26043cce33158d4e027576e79fab2f7bb Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 9 Oct 2012 17:38:35 +0200 Subject: x86/perf: Fix virtualization sanity check In check_hw_exists() we try to detect non-emulated MSR accesses by writing an arbitrary value into one of the PMU registers and check if it's value after a readout is still the same. This algorithm silently assumes that the register does not contain the magic value already, which is wrong in at least one situation. Fix the algorithm to really do a read-modify-write cycle. This fixes a warning under Xen under some circumstances on AMD family 10h CPUs. The reasons in more details actually sound like a story from Believe It or Not!: First you need an AMD family 10h/12h CPU. These do not reset the PERF_CTR registers on a reboot. Now you boot bare metal Linux, which goes successfully through this check, but leaves the magic value of 0xabcd in the register. You don't use the performance counters, but do a reboot (warm reset). Then you choose to boot Xen. The check will be triggered with a recent Linux kernel as Dom0 again, trying to write 0xabcd into the MSR. Xen silently drops the write (expected), but the subsequent read will return the value in the register, which just happens to be the expected magic value. Thus the test misleadingly succeeds, leaving the kernel in the belief that the PMU is available. This will trigger the following message: [ 0.020294] ------------[ cut here ]------------ [ 0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17() [ 0.020318] Hardware name: empty [ 0.020323] Modules linked in: [ 0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7 [ 0.020340] Call Trace: [ 0.020354] [] warn_slowpath_common+0x80/0x98 [ 0.020369] [] warn_slowpath_null+0x15/0x17 [ 0.020378] [] xen_apic_write+0x15/0x17 [ 0.020392] [] perf_events_lapic_init+0x2e/0x30 [ 0.020410] [] init_hw_perf_events+0x250/0x407 [ 0.020419] [] ? check_bugs+0x2d/0x2d [ 0.020430] [] do_one_initcall+0x7a/0x131 [ 0.020444] [] kernel_init+0x91/0x15d [ 0.020456] [] kernel_thread_helper+0x4/0x10 [ 0.020471] [] ? retint_restore_args+0x5/0x6 [ 0.020481] [] ? gs_change+0x13/0x13 [ 0.020500] ---[ end trace a7919e7f17c0a725 ]--- The new code will change every of the 16 low bits read from the register and tries to write and read-back that modified number from the MSR. Signed-off-by: Andre Przywara Signed-off-by: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Avi Kivity Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 3373f84..4a3374e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -208,12 +208,14 @@ static bool check_hw_exists(void) } /* - * Now write a value and read it back to see if it matches, - * this is needed to detect certain hardware emulators (qemu/kvm) - * that don't trap on the MSR access and always return 0s. + * Read the current value, change it and read it back to see if it + * matches, this is needed to detect certain hardware emulators + * (qemu/kvm) that don't trap on the MSR access and always return 0s. */ - val = 0xabcdUL; reg = x86_pmu_event_addr(0); + if (rdmsrl_safe(reg, &val)) + goto msr_fail; + val ^= 0xffffUL; ret = wrmsrl_safe(reg, val); ret |= rdmsrl_safe(reg, &val_new); if (ret || val != val_new) -- cgit v0.10.2 From 7b16bbf97375d9fb7fc107b3f80afeb94a204e44 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Thu, 18 Oct 2012 14:33:23 +0800 Subject: Revert "x86/mm: Fix the size calculation of mapping tables" Commit: 722bc6b16771 x86/mm: Fix the size calculation of mapping tables Tried to address the issue that the first 2/4M should use 4k pages if PSE enabled, but extra counts should only be valid for x86_32. This commit caused a kdump regression: the kdump kernel hangs. Work is in progress to fundamentally fix the various page table initialization issues that we have, via the design suggested by H. Peter Anvin, but it's not ready yet to be merged. So, to get a working kdump revert to the last known working version, which is the revert of this commit and of a followup fix (which was incomplete): bd2753b2dda7 x86/mm: Only add extra pages count for the first memory range during pre-allocation Tested kdump on physical and virtual machines. Signed-off-by: Dave Young Acked-by: Yinghai Lu Acked-by: Cong Wang Acked-by: Flavio Leitner Tested-by: Flavio Leitner Cc: Dan Carpenter Cc: Cong Wang Cc: Flavio Leitner Cc: Tejun Heo Cc: ianfang.cn@gmail.com Cc: Vivek Goyal Cc: Linus Torvalds Cc: Andrew Morton Cc: Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index ab1f6a9..8653b3a 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -29,14 +29,8 @@ int direct_gbpages #endif ; -struct map_range { - unsigned long start; - unsigned long end; - unsigned page_size_mask; -}; - -static void __init find_early_table_space(struct map_range *mr, unsigned long end, - int use_pse, int use_gbpages) +static void __init find_early_table_space(unsigned long end, int use_pse, + int use_gbpages) { unsigned long puds, pmds, ptes, tables, start = 0, good_end = end; phys_addr_t base; @@ -61,10 +55,6 @@ static void __init find_early_table_space(struct map_range *mr, unsigned long en #ifdef CONFIG_X86_32 extra += PMD_SIZE; #endif - /* The first 2/4M doesn't use large pages. */ - if (mr->start < PMD_SIZE) - extra += mr->end - mr->start; - ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; } else ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT; @@ -95,6 +85,12 @@ void __init native_pagetable_reserve(u64 start, u64 end) memblock_reserve(start, end - start); } +struct map_range { + unsigned long start; + unsigned long end; + unsigned page_size_mask; +}; + #ifdef CONFIG_X86_32 #define NR_RANGE_MR 3 #else /* CONFIG_X86_64 */ @@ -267,7 +263,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, * nodes are discovered. */ if (!after_bootmem) - find_early_table_space(&mr[0], end, use_pse, use_gbpages); + find_early_table_space(end, use_pse, use_gbpages); for (i = 0; i < nr_range; i++) ret = kernel_physical_mapping_init(mr[i].start, mr[i].end, -- cgit v0.10.2 From 6760bca9fd16256210f4922a3e9f067d2c7017d7 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 16 Oct 2012 13:28:10 +0530 Subject: perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled The CPU_STARTING notifiers are supposed to be run with irqs disabled. But the perf_cpu_notifier() macro invokes them without doing that. Fix it. Signed-off-by: Srivatsa S. Bhat Reviewed-by: Paul E. McKenney Cc: peterz@infradead.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/20121016075809.3572.47848.stgit@srivatsabhat.in.ibm.com Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 2e90235..0647805 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -803,10 +803,13 @@ static inline void perf_event_task_tick(void) { } do { \ static struct notifier_block fn##_nb __cpuinitdata = \ { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ + unsigned long flags; \ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ (void *)(unsigned long)smp_processor_id()); \ + local_irq_save(flags); \ fn(&fn##_nb, (unsigned long)CPU_STARTING, \ (void *)(unsigned long)smp_processor_id()); \ + local_irq_restore(flags); \ fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ (void *)(unsigned long)smp_processor_id()); \ register_cpu_notifier(&fn##_nb); \ -- cgit v0.10.2 From c13d38e4a1fd5dd07135403c613c8091af444169 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 16 Oct 2012 13:28:17 +0530 Subject: perf, cpu hotplug: Use cached value of smp_processor_id() The perf_cpu_notifier() macro invokes smp_processor_id() multiple times. Optimize it by using a local variable. Signed-off-by: Srivatsa S. Bhat Reviewed-by: Paul E. McKenney Cc: peterz@infradead.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/20121016075817.3572.76733.stgit@srivatsabhat.in.ibm.com Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 0647805..6bfb2faa 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -803,15 +803,16 @@ static inline void perf_event_task_tick(void) { } do { \ static struct notifier_block fn##_nb __cpuinitdata = \ { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ + unsigned long cpu = smp_processor_id(); \ unsigned long flags; \ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ local_irq_save(flags); \ fn(&fn##_nb, (unsigned long)CPU_STARTING, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ local_irq_restore(flags); \ fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ register_cpu_notifier(&fn##_nb); \ } while (0) -- cgit v0.10.2 From 7991c9ca40d3127dd2ffa3a9c1e33f7d4005495a Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Fri, 19 Oct 2012 17:30:01 -0400 Subject: perf/x86: Fix P6 FP_ASSIST event constraint According to Intel SDM Volume 3B, FP_ASSIST is limited to Counter 1 only, not Counter 0. Tested on a Pentium II. Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191728570.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index e4dd0f7..0ff5f7f 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -34,7 +34,7 @@ static struct event_constraint p6_event_constraints[] = { INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FLOPS */ INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */ - INTEL_EVENT_CONSTRAINT(0x11, 0x1), /* FP_ASSIST */ + INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */ INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */ INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */ -- cgit v0.10.2 From e09df47885d767e418902067ce1885aafa3b27db Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Fri, 19 Oct 2012 17:31:54 -0400 Subject: perf/x86: Update/fix generic events on P6 PMU This patch updates the generic events on p6, including some new extended cache events. Values for these events were taken from the equivelant PAPI predefined events. Tested on a Pentium II. Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191730080.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index 0ff5f7f..9582fcb 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -8,13 +8,106 @@ */ static const u64 p6_perfmon_event_map[] = { - [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, - [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, - [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, - [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, - [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, - [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, + [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, /* CPU_CLK_UNHALTED */ + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, /* INST_RETIRED */ + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, /* L2_RQSTS:M:E:S:I */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, /* L2_RQSTS:I */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, /* BR_INST_RETIRED */ + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, /* BR_MISS_PRED_RETIRED */ + [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, /* BUS_DRDY_CLOCKS */ + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00a2, /* RESOURCE_STALLS */ + +}; + +static __initconst u64 p6_hw_cache_event_ids + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = +{ + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */ + [ C(RESULT_MISS) ] = 0x0045, /* DCU_LINES_IN */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0x0f29, /* L2_LD:M:E:S:I */ + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(L1I ) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */ + [ C(RESULT_MISS) ] = 0x0f28, /* L2_IFETCH:M:E:S:I */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(LL ) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0x0025, /* L2_M_LINES_INM */ + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */ + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */ + [ C(RESULT_MISS) ] = 0x0085, /* ITLB_MISS */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(BPU ) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED */ + [ C(RESULT_MISS) ] = 0x00c5, /* BR_MISS_PRED_RETIRED */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, }; static u64 p6_pmu_event_map(int hw_event) @@ -158,5 +251,9 @@ __init int p6_pmu_init(void) x86_pmu = p6_pmu; + memcpy(hw_cache_event_ids, p6_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + + return 0; } -- cgit v0.10.2 From 58e9eaf06f5476cb2192ec1d012674ce5e79dd21 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Fri, 19 Oct 2012 17:33:38 -0400 Subject: perf/x86: Remove P6 cpuc->enabled check Between 2.6.33 and 2.6.34 the PMU code was made modular. The x86_pmu_enable() call was extended to disable cpuc->enabled and iterate the counters, enabling one at a time, before calling enable_all() at the end, followed by re-enabling cpuc->enabled. Since cpuc->enabled was set to 0, that change effectively caused the "val |= ARCH_PERFMON_EVENTSEL_ENABLE;" code in p6_pmu_enable_event() and p6_pmu_disable_event() to be dead code that was never called. This change removes this code (which was confusing) and adds some extra commentary to make it more clear what is going on. Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191732000.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index 9582fcb..7d0270b 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -157,25 +157,25 @@ static void p6_pmu_enable_all(int added) static inline void p6_pmu_disable_event(struct perf_event *event) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; u64 val = P6_NOP_EVENT; - if (cpuc->enabled) - val |= ARCH_PERFMON_EVENTSEL_ENABLE; - (void)wrmsrl_safe(hwc->config_base, val); } static void p6_pmu_enable_event(struct perf_event *event) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; u64 val; val = hwc->config; - if (cpuc->enabled) - val |= ARCH_PERFMON_EVENTSEL_ENABLE; + + /* + * p6 only has a global event enable, set on PerfEvtSel0 + * We "disable" events by programming P6_NOP_EVENT + * and we rely on p6_pmu_enable_all() being called + * to actually enable the events. + */ (void)wrmsrl_safe(hwc->config_base, val); } -- cgit v0.10.2 From 876ee61aadf01aa0db981b5d249cbdd53dc28b5e Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 4 Oct 2012 14:48:10 +0100 Subject: x86-64: Fix page table accounting Commit 20167d3421a089a1bf1bd680b150dc69c9506810 ("x86-64: Fix accounting in kernel_physical_mapping_init()") went a little too far by entirely removing the counting of pre-populated page tables: this should be done at boot time (to cover the page tables set up in early boot code), but shouldn't be done during memory hot add. Hence, re-add the removed increments of "pages", but make them and the one in phys_pte_init() conditional upon !after_bootmem. Reported-Acked-and-Tested-by: Hugh Dickins Signed-off-by: Jan Beulich Cc: Link: http://lkml.kernel.org/r/506DAFBA020000780009FA8C@nat28.tlf.novell.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 2b6b4a3..3baff25 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -386,7 +386,8 @@ phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end, * these mappings are more intelligent. */ if (pte_val(*pte)) { - pages++; + if (!after_bootmem) + pages++; continue; } @@ -451,6 +452,8 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end, * attributes. */ if (page_size_mask & (1 << PG_LEVEL_2M)) { + if (!after_bootmem) + pages++; last_map_addr = next; continue; } @@ -526,6 +529,8 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end, * attributes. */ if (page_size_mask & (1 << PG_LEVEL_1G)) { + if (!after_bootmem) + pages++; last_map_addr = next; continue; } -- cgit v0.10.2 From fc09e3672ed623f9c8e73ded3cbcd2cfcf304aac Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Tue, 23 Oct 2012 12:37:17 +0200 Subject: can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boards This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean Acked-by: Oliver Hartkopp Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index f5b82ae..6525dbc 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -30,9 +30,10 @@ #include "sja1000.h" -MODULE_AUTHOR("Wolfgang Grandegger "); +MODULE_AUTHOR("Stephane Grosjean "); MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards"); MODULE_LICENSE("GPL v2"); #define DRV_NAME "peak_pci" @@ -64,7 +65,11 @@ struct peak_pci_chan { #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ -#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */ +#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ +#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ +#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ +#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ #define PEAK_PCI_CHAN_MAX 4 @@ -76,6 +81,10 @@ static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = { {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, #ifdef CONFIG_CAN_PEAK_PCIEC {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, #endif -- cgit v0.10.2 From 032c3851f51141e30de02ed0bc50a7743dfd776d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 24 Oct 2012 16:42:20 +0800 Subject: perf/x86/uncore: Handle pci_read_config_dword() errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This, beyond handling corner cases, also fixes some build warnings: arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_disable_box’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:124:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized] arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_enable_box’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:135:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized] arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_read_counter’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:164:2: warning: ‘count’ is used uninitialized in this function [-Wuninitialized] Signed-off-by: Yan, Zheng Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1351068140-13456-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 5df8d32..6f87477 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -118,22 +118,24 @@ static void snbep_uncore_pci_disable_box(struct intel_uncore_box *box) { struct pci_dev *pdev = box->pci_dev; int box_ctl = uncore_pci_box_ctl(box); - u32 config; + u32 config = 0; - pci_read_config_dword(pdev, box_ctl, &config); - config |= SNBEP_PMON_BOX_CTL_FRZ; - pci_write_config_dword(pdev, box_ctl, config); + if (!pci_read_config_dword(pdev, box_ctl, &config)) { + config |= SNBEP_PMON_BOX_CTL_FRZ; + pci_write_config_dword(pdev, box_ctl, config); + } } static void snbep_uncore_pci_enable_box(struct intel_uncore_box *box) { struct pci_dev *pdev = box->pci_dev; int box_ctl = uncore_pci_box_ctl(box); - u32 config; + u32 config = 0; - pci_read_config_dword(pdev, box_ctl, &config); - config &= ~SNBEP_PMON_BOX_CTL_FRZ; - pci_write_config_dword(pdev, box_ctl, config); + if (!pci_read_config_dword(pdev, box_ctl, &config)) { + config &= ~SNBEP_PMON_BOX_CTL_FRZ; + pci_write_config_dword(pdev, box_ctl, config); + } } static void snbep_uncore_pci_enable_event(struct intel_uncore_box *box, struct perf_event *event) @@ -156,7 +158,7 @@ static u64 snbep_uncore_pci_read_counter(struct intel_uncore_box *box, struct pe { struct pci_dev *pdev = box->pci_dev; struct hw_perf_event *hwc = &event->hw; - u64 count; + u64 count = 0; pci_read_config_dword(pdev, hwc->event_base, (u32 *)&count); pci_read_config_dword(pdev, hwc->event_base + 4, (u32 *)&count + 1); @@ -603,11 +605,12 @@ static struct pci_driver snbep_uncore_pci_driver = { /* * build pci bus to socket mapping */ -static void snbep_pci2phy_map_init(void) +static int snbep_pci2phy_map_init(void) { struct pci_dev *ubox_dev = NULL; int i, bus, nodeid; - u32 config; + int err = 0; + u32 config = 0; while (1) { /* find the UBOX device */ @@ -618,10 +621,14 @@ static void snbep_pci2phy_map_init(void) break; bus = ubox_dev->bus->number; /* get the Node ID of the local register */ - pci_read_config_dword(ubox_dev, 0x40, &config); + err = pci_read_config_dword(ubox_dev, 0x40, &config); + if (err) + break; nodeid = config; /* get the Node ID mapping */ - pci_read_config_dword(ubox_dev, 0x54, &config); + err = pci_read_config_dword(ubox_dev, 0x54, &config); + if (err) + break; /* * every three bits in the Node ID mapping register maps * to a particular node. @@ -633,7 +640,11 @@ static void snbep_pci2phy_map_init(void) } } }; - return; + + if (ubox_dev) + pci_dev_put(ubox_dev); + + return err ? pcibios_err_to_errno(err) : 0; } /* end of Sandy Bridge-EP uncore support */ @@ -2578,9 +2589,11 @@ static int __init uncore_pci_init(void) switch (boot_cpu_data.x86_model) { case 45: /* Sandy Bridge-EP */ + ret = snbep_pci2phy_map_init(); + if (ret) + return ret; pci_uncores = snbep_pci_uncores; uncore_pci_driver = &snbep_uncore_pci_driver; - snbep_pci2phy_map_init(); break; default: return 0; -- cgit v0.10.2 From ae5ba47a990a18c869d66916fd72fb334c45cf91 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Wed, 17 Oct 2012 13:03:21 -0400 Subject: perf/x86: Make Intel KNC use full 40-bit width of counters Early versions of Intel KNC chips have a bug where bits above 32 were not properly set. We worked around this by only using the bottom 32 bits (out of 40 that should be available). It turns out this workaround breaks overflow handling. The buggy silicon will in theory never be used in production systems, so remove this workaround so we get proper overflow support. Signed-off-by: Vince Weaver Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: eranian@gmail.com Cc: Meadows Lawrence F Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171302140.23243@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c index 7c46bfd..73bcfbd 100644 --- a/arch/x86/kernel/cpu/perf_event_knc.c +++ b/arch/x86/kernel/cpu/perf_event_knc.c @@ -226,12 +226,11 @@ static __initconst struct x86_pmu knc_pmu = { .event_map = knc_pmu_event_map, .max_events = ARRAY_SIZE(knc_perfmon_event_map), .apic = 1, - .max_period = (1ULL << 31) - 1, + .max_period = (1ULL << 39) - 1, .version = 0, .num_counters = 2, - /* in theory 40 bits, early silicon is buggy though */ - .cntval_bits = 32, - .cntval_mask = (1ULL << 32) - 1, + .cntval_bits = 40, + .cntval_mask = (1ULL << 40) - 1, .get_event_constraints = x86_get_event_constraints, .event_constraints = knc_event_constraints, .format_attrs = intel_knc_formats_attr, -- cgit v0.10.2 From 7d011962afbaa6e572cd8e0dbb7abf773e166e64 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Wed, 17 Oct 2012 13:04:33 -0400 Subject: perf/x86: Remove cpuc->enable check on Intl KNC event enable/disable x86_pmu.enable() is called from x86_pmu_enable() with cpuc->enabled set to 0. This means we weren't re-enabling the counters after a context switch. This patch just removes the check, as it should't be necessary (and the equivelent x86_ generic code does not have the checks). The origin of this problem is the KNC driver being based on the P6 one. The P6 driver also has this issue, but works anyway due to various lucky accidents. Signed-off-by: Vince Weaver Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: eranian@gmail.com Cc: Meadows Cc: Lawrence F Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171303290.23243@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c index 73bcfbd..f3a2af4 100644 --- a/arch/x86/kernel/cpu/perf_event_knc.c +++ b/arch/x86/kernel/cpu/perf_event_knc.c @@ -173,26 +173,22 @@ static void knc_pmu_enable_all(int added) static inline void knc_pmu_disable_event(struct perf_event *event) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; u64 val; val = hwc->config; - if (cpuc->enabled) - val &= ~ARCH_PERFMON_EVENTSEL_ENABLE; + val &= ~ARCH_PERFMON_EVENTSEL_ENABLE; (void)wrmsrl_safe(hwc->config_base + hwc->idx, val); } static void knc_pmu_enable_event(struct perf_event *event) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct hw_perf_event *hwc = &event->hw; u64 val; val = hwc->config; - if (cpuc->enabled) - val |= ARCH_PERFMON_EVENTSEL_ENABLE; + val |= ARCH_PERFMON_EVENTSEL_ENABLE; (void)wrmsrl_safe(hwc->config_base + hwc->idx, val); } -- cgit v0.10.2 From e4074b3049f99c6ad6e1a33e6d93d8ec0652e2c1 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Wed, 17 Oct 2012 13:05:45 -0400 Subject: perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq() Although based on the Intel P6 design, the interrupt mechnanism for KNC more closely resembles the Intel architectural perfmon one. We can't just re-use that code though, because KNC has different MSR numbers for the status and ack registers. In this case we just cut-and paste from perf_event_intel.c with some minor changes, as it looks like it would not be worth the trouble to change that code to be MSR-configurable. Signed-off-by: Vince Weaver Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: eranian@gmail.com Cc: Meadows Lawrence F Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171304410.23243@vincent-weaver-1.um.maine.edu [ Small stylistic edits. ] Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c index f3a2af4..4b7731b 100644 --- a/arch/x86/kernel/cpu/perf_event_knc.c +++ b/arch/x86/kernel/cpu/perf_event_knc.c @@ -3,6 +3,8 @@ #include #include +#include + #include "perf_event.h" static const u64 knc_perfmon_event_map[] = @@ -193,6 +195,80 @@ static void knc_pmu_enable_event(struct perf_event *event) (void)wrmsrl_safe(hwc->config_base + hwc->idx, val); } +static inline u64 knc_pmu_get_status(void) +{ + u64 status; + + rdmsrl(MSR_KNC_IA32_PERF_GLOBAL_STATUS, status); + + return status; +} + +static inline void knc_pmu_ack_status(u64 ack) +{ + wrmsrl(MSR_KNC_IA32_PERF_GLOBAL_OVF_CONTROL, ack); +} + +static int knc_pmu_handle_irq(struct pt_regs *regs) +{ + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + int handled = 0; + int bit, loops; + u64 status; + + cpuc = &__get_cpu_var(cpu_hw_events); + + knc_pmu_disable_all(); + + status = knc_pmu_get_status(); + if (!status) { + knc_pmu_enable_all(0); + return handled; + } + + loops = 0; +again: + knc_pmu_ack_status(status); + if (++loops > 100) { + WARN_ONCE(1, "perf: irq loop stuck!\n"); + perf_event_print_debug(); + goto done; + } + + inc_irq_stat(apic_perf_irqs); + + for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) { + struct perf_event *event = cpuc->events[bit]; + + handled++; + + if (!test_bit(bit, cpuc->active_mask)) + continue; + + if (!intel_pmu_save_and_restart(event)) + continue; + + perf_sample_data_init(&data, 0, event->hw.last_period); + + if (perf_event_overflow(event, &data, regs)) + x86_pmu_stop(event, 0); + } + + /* + * Repeat if there is more work to be done: + */ + status = knc_pmu_get_status(); + if (status) + goto again; + +done: + knc_pmu_enable_all(0); + + return handled; +} + + PMU_FORMAT_ATTR(event, "config:0-7" ); PMU_FORMAT_ATTR(umask, "config:8-15" ); PMU_FORMAT_ATTR(edge, "config:18" ); @@ -210,7 +286,7 @@ static struct attribute *intel_knc_formats_attr[] = { static __initconst struct x86_pmu knc_pmu = { .name = "knc", - .handle_irq = x86_pmu_handle_irq, + .handle_irq = knc_pmu_handle_irq, .disable_all = knc_pmu_disable_all, .enable_all = knc_pmu_enable_all, .enable = knc_pmu_enable_event, -- cgit v0.10.2 From 834328a8493079d15f30866ace42489463f52571 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Tue, 23 Oct 2012 11:27:33 +0200 Subject: Btrfs: tree mod log's old roots could still be part of the tree Tree mod log treated old root buffers as always empty buffers when starting the rewind operations. However, the old root may still be part of the current tree at a lower level, with still some valid entries. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index e6b75cc..d9308c38 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1239,6 +1239,7 @@ get_old_root(struct btrfs_root *root, u64 time_seq) struct tree_mod_root *old_root = NULL; u64 old_generation = 0; u64 logical; + u32 blocksize; eb = btrfs_read_lock_root_node(root); tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq); @@ -1254,12 +1255,28 @@ get_old_root(struct btrfs_root *root, u64 time_seq) } tm = tree_mod_log_search(root->fs_info, logical, time_seq); - if (old_root) + if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) { + btrfs_tree_read_unlock(root->node); + free_extent_buffer(root->node); + blocksize = btrfs_level_size(root, old_root->level); + eb = read_tree_block(root, logical, blocksize, 0); + if (!eb) { + pr_warn("btrfs: failed to read tree block %llu from get_old_root\n", + logical); + WARN_ON(1); + } else { + eb = btrfs_clone_extent_buffer(eb); + } + } else if (old_root) { + btrfs_tree_read_unlock(root->node); + free_extent_buffer(root->node); eb = alloc_dummy_extent_buffer(logical, root->nodesize); - else + } else { eb = btrfs_clone_extent_buffer(root->node); - btrfs_tree_read_unlock(root->node); - free_extent_buffer(root->node); + btrfs_tree_read_unlock(root->node); + free_extent_buffer(root->node); + } + if (!eb) return NULL; btrfs_tree_read_lock(eb); -- cgit v0.10.2 From 5b6602e762cae17c8891d19698afea451e9c1d95 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Tue, 23 Oct 2012 11:28:27 +0200 Subject: Btrfs: determine level of old roots In btrfs_find_all_roots' termination condition, we compare the level of the old buffer we got from btrfs_search_old_slot to the level of the current root node. We'd better compare it to the level of the rewinded root node. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index f318793..65608fb 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -283,9 +283,7 @@ static int __resolve_indirect_ref(struct btrfs_fs_info *fs_info, goto out; } - rcu_read_lock(); - root_level = btrfs_header_level(root->node); - rcu_read_unlock(); + root_level = btrfs_old_root_level(root, time_seq); if (root_level + 1 == level) goto out; diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index d9308c38..ef68c33 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1297,6 +1297,23 @@ get_old_root(struct btrfs_root *root, u64 time_seq) return eb; } +int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq) +{ + struct tree_mod_elem *tm; + int level; + + tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq); + if (tm && tm->op == MOD_LOG_ROOT_REPLACE) { + level = tm->old_root.level; + } else { + rcu_read_lock(); + level = btrfs_header_level(root->node); + rcu_read_unlock(); + } + + return level; +} + static inline int should_cow_block(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *buf) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 1630be8..34c5a44 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3120,6 +3120,7 @@ static inline u64 btrfs_inc_tree_mod_seq(struct btrfs_fs_info *fs_info) { return atomic_inc_return(&fs_info->tree_mod_seq); } +int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq); /* root-item.c */ int btrfs_find_root_ref(struct btrfs_root *tree_root, -- cgit v0.10.2 From d638108484d186bf97a838d037f165d9b404e6ee Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Tue, 23 Oct 2012 14:21:05 +0200 Subject: Btrfs: fix extent buffer reference for tree mod log roots In get_old_root we grab a lock on the extent buffer before we obtain a reference on that buffer. That order is changed now. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index ef68c33..f673990 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1279,6 +1279,7 @@ get_old_root(struct btrfs_root *root, u64 time_seq) if (!eb) return NULL; + extent_buffer_get(eb); btrfs_tree_read_lock(eb); if (old_root) { btrfs_set_header_bytenr(eb, eb->start); @@ -1291,7 +1292,6 @@ get_old_root(struct btrfs_root *root, u64 time_seq) __tree_mod_log_rewind(eb, time_seq, tm); else WARN_ON(btrfs_header_level(eb) != 0); - extent_buffer_get(eb); WARN_ON(btrfs_header_nritems(eb) > BTRFS_NODEPTRS_PER_BLOCK(root)); return eb; -- cgit v0.10.2 From 01763a2e37425ae3f37a3dc051e0703fdade5956 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Tue, 23 Oct 2012 15:02:12 +0200 Subject: Btrfs: comment for loop in tree_mod_log_insert_move Emphasis the way tree_mod_log_insert_move avoids adding MOD_LOG_KEY_REMOVE_WHILE_MOVING operations, depending on the direction of the move operation. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index f673990..eba44b0 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -596,6 +596,11 @@ tree_mod_log_insert_move(struct btrfs_fs_info *fs_info, if (tree_mod_dont_log(fs_info, eb)) return 0; + /* + * When we override something during the move, we log these removals. + * This can only happen when we move towards the beginning of the + * buffer, i.e. dst_slot < src_slot. + */ for (i = 0; i + dst_slot < src_slot && i < nr_items; i++) { ret = tree_mod_log_insert_key_locked(fs_info, eb, i + dst_slot, MOD_LOG_KEY_REMOVE_WHILE_MOVING); -- cgit v0.10.2 From 3e8fa263a97079c74880675c451587bb6899e661 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 19 Oct 2012 13:25:46 +0100 Subject: x86/efi: Fix oops caused by incorrect set_memory_uc() usage Calling __pa() with an ioremap'd address is invalid. If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this results in the following oops: BUG: unable to handle kernel paging request at f7f22280 IP: [] reserve_ram_pages_type+0x89/0x210 *pdpt = 0000000001978001 *pde = 0000000001ffb067 *pte = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: Pid: 0, comm: swapper Not tainted 3.0.0-acpi-efi-0805 #3 EIP: 0060:[] EFLAGS: 00010202 CPU: 0 EIP is at reserve_ram_pages_type+0x89/0x210 EAX: 0070e280 EBX: 38714000 ECX: f7814000 EDX: 00000000 ESI: 00000000 EDI: 38715000 EBP: c189fef0 ESP: c189fea8 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c189e000 task=c18bbe60 task.ti=c189e000) Stack: 80000200 ff108000 00000000 c189ff00 00038714 00000000 00000000 c189fed0 c104f8ca 00038714 00000000 00038715 00000000 00000000 00038715 00000000 00000010 38715000 c189ff48 c1025aff 38715000 00000000 00000010 00000000 Call Trace: [] ? page_is_ram+0x1a/0x40 [] reserve_memtype+0xdf/0x2f0 [] set_memory_uc+0x49/0xa0 [] efi_enter_virtual_mode+0x1c2/0x3aa [] start_kernel+0x291/0x2f2 [] ? loglevel+0x1b/0x1b [] i386_start_kernel+0xbf/0xc8 The only time we can call set_memory_uc() for a memory region is when it is part of the direct kernel mapping. For the case where we ioremap a memory region we must leave it alone. This patch reimplements the fix from e8c7106280a3 ("x86, efi: Calling __pa() with an ioremap()ed address is invalid") which was reverted in e1ad783b12ec because it caused a regression on some MacBooks (they hung at boot). The regression was caused because the commit only marked EFI_RUNTIME_SERVICES_DATA as E820_RESERVED_EFI, when it should have marked all regions that have the EFI_MEMORY_RUNTIME attribute. Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because of the way that the memory map might be configured as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 e.g. some of the EFI memory regions *need* to be mapped as part of the direct kernel mapping. Signed-off-by: Matt Fleming Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Keith Packard Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1350649546-23541-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index c9dcc18..36ff332 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -35,7 +35,7 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) +#define efi_ioremap(addr, size, type, attr) ioremap_cache(addr, size) #else /* !CONFIG_X86_32 */ @@ -89,7 +89,7 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, - u32 type); + u32 type, u64 attribute); #endif /* CONFIG_X86_32 */ @@ -98,6 +98,7 @@ extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern int efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); extern void efi_call_phys_epilog(void); +extern void efi_memory_uc(u64 addr, unsigned long size); #ifndef CONFIG_EFI /* diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index aded2a9..cb34839 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -810,6 +810,16 @@ void __iomem *efi_lookup_mapped_addr(u64 phys_addr) return NULL; } +void efi_memory_uc(u64 addr, unsigned long size) +{ + unsigned long page_shift = 1UL << EFI_PAGE_SHIFT; + u64 npages; + + npages = round_up(size, page_shift) / page_shift; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); +} + /* * This function will switch the EFI runtime services to virtual mode. * Essentially, look through the EFI memmap and map every region that @@ -823,7 +833,7 @@ void __init efi_enter_virtual_mode(void) efi_memory_desc_t *md, *prev_md = NULL; efi_status_t status; unsigned long size; - u64 end, systab, addr, npages, end_pfn; + u64 end, systab, end_pfn; void *p, *va, *new_memmap = NULL; int count = 0; @@ -879,10 +889,14 @@ void __init efi_enter_virtual_mode(void) end_pfn = PFN_UP(end); if (end_pfn <= max_low_pfn_mapped || (end_pfn > (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) + && end_pfn <= max_pfn_mapped)) { va = __va(md->phys_addr); - else - va = efi_ioremap(md->phys_addr, size, md->type); + + if (!(md->attribute & EFI_MEMORY_WB)) + efi_memory_uc((u64)(unsigned long)va, size); + } else + va = efi_ioremap(md->phys_addr, size, + md->type, md->attribute); md->virt_addr = (u64) (unsigned long) va; @@ -892,13 +906,6 @@ void __init efi_enter_virtual_mode(void) continue; } - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac3aa54..95fd505 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -82,7 +82,7 @@ void __init efi_call_phys_epilog(void) } void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, - u32 type) + u32 type, u64 attribute) { unsigned long last_map_pfn; @@ -92,8 +92,11 @@ void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { unsigned long top = last_map_pfn << PAGE_SHIFT; - efi_ioremap(top, size - (top - phys_addr), type); + efi_ioremap(top, size - (top - phys_addr), type, attribute); } + if (!(attribute & EFI_MEMORY_WB)) + efi_memory_uc((u64)(unsigned long)__va(phys_addr), size); + return (void __iomem *)__va(phys_addr); } -- cgit v0.10.2 From 64dfab8e83644902ad2fd559a56c411b47e3ef3c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 22 Oct 2012 16:51:38 +0800 Subject: perf/x86: Remove unused variable in nhmex_rbox_alter_er() The variable port is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Cc: Yan, Zheng Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8NZkYSkZm22FpZxiEh6HcA0q-V%3D29vdnheiDhgrJZ%2Byw@mail.gmail.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 6f87477..3cf3d97 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -1558,7 +1558,6 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; - int port; /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { @@ -1570,7 +1569,6 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) } /* adjust extra register config */ - port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { case 2: /* shift the 8~15 bits to the 0~7 bits */ -- cgit v0.10.2 From 94777fc51b3ad85ff9f705ddf7cdd0eb3bbad5a6 Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Tue, 16 Oct 2012 07:50:21 -0500 Subject: x86/irq/ioapic: Check for valid irq_cfg pointer in smp_irq_move_cleanup_interrupt Posting this patch to fix an issue concerning sparse irq's that I raised a while back. There was discussion about adding refcounting to sparse irqs (to fix other potential race conditions), but that does not appear to have been addressed yet. This covers the only issue of this type that I've encountered in this area. A NULL pointer dereference can occur in smp_irq_move_cleanup_interrupt() if we haven't yet setup the irq_cfg pointer in the irq_desc.irq_data.chip_data. In create_irq_nr() there is a window where we have set vector_irq in __assign_irq_vector(), but not yet called irq_set_chip_data() to set the irq_cfg pointer. Should an IRQ_MOVE_CLEANUP_VECTOR hit the cpu in question during this time, smp_irq_move_cleanup_interrupt() will attempt to process the aforementioned irq, but panic when accessing irq_cfg. Only continue processing the irq if irq_cfg is non-NULL. Signed-off-by: Dimitri Sivanich Cc: Suresh Siddha Cc: Joerg Roedel Cc: Yinghai Lu Cc: Alexander Gordeev Link: http://lkml.kernel.org/r/20121016125021.GA22935@sgi.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index c265593..1817fa9 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2257,6 +2257,9 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void) continue; cfg = irq_cfg(irq); + if (!cfg) + continue; + raw_spin_lock(&desc->lock); /* -- cgit v0.10.2 From 5997e089e4c3a7f0958a8fb0a54ec2b5a6f06168 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 27 Sep 2012 16:35:38 +0800 Subject: dmaengine: sirf: fix a typo in dma_prep_interleaved either DEV_TO_MEM or MEM_TO_DEV is supported, so change OR to AND. Signed-off-by: Barry Song Cc: stable Signed-off-by: Vinod Koul diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 64385cd..649fd6c 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -428,7 +428,7 @@ static struct dma_async_tx_descriptor *sirfsoc_dma_prep_interleaved( unsigned long iflags; int ret; - if ((xt->dir != DMA_MEM_TO_DEV) || (xt->dir != DMA_DEV_TO_MEM)) { + if ((xt->dir != DMA_MEM_TO_DEV) && (xt->dir != DMA_DEV_TO_MEM)) { ret = -EINVAL; goto err_dir; } -- cgit v0.10.2 From 26fd12209c08fe947be1828896ef4ffc5bd0e6df Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 27 Sep 2012 16:36:10 +0800 Subject: dmaengine: sirf: fix a typo in moving running dma_desc to active queue list_move_tail(&schan->queued, &schan->active) makes the list_empty(schan->queued) undefined, we either should change it to: list_move_tail(schan->queued.next, &schan->active) or list_move_tail(&sdesc->node, &schan->active) Signed-off-by: Barry Song Cc: stable Signed-off-by: Vinod Koul diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 649fd6c..d451caa 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -109,7 +109,7 @@ static void sirfsoc_dma_execute(struct sirfsoc_dma_chan *schan) sdesc = list_first_entry(&schan->queued, struct sirfsoc_dma_desc, node); /* Move the first queued descriptor to active list */ - list_move_tail(&schan->queued, &schan->active); + list_move_tail(&sdesc->node, &schan->active); /* Start the DMA transfer */ writel_relaxed(sdesc->width, sdma->base + SIRFSOC_DMA_WIDTH_0 + -- cgit v0.10.2 From 79748cdb39dbf914bc5f26c75cfd5f91d84d82c9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 1 Oct 2012 15:28:30 +0100 Subject: ASoC: wm8994: Only enable extra BCLK cycles when required Rather than always assuming the maximum possible BCLK rate will be required generate BCLKs for stereo if either one or two channels is enabled. In order to support this we also need to ensure that only the relevant channels are enabled. Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 2b2dadc..3fddc7a 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1045,6 +1045,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); struct wm8994 *control = codec->control_data; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; int i; @@ -1063,6 +1064,10 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_PRE_PMU: + /* Don't enable timeslot 2 if not in use */ + if (wm8994->channels[0] <= 2) + mask &= ~(WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA); + val = snd_soc_read(codec, WM8994_AIF1_CONTROL_1); if ((val & WM8994_AIF1ADCL_SRC) && (val & WM8994_AIF1ADCR_SRC)) @@ -2687,7 +2692,7 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - bclk_rate = params_rate(params) * 4; + bclk_rate = params_rate(params); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: bclk_rate *= 16; @@ -2708,6 +2713,17 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + wm8994->channels[id] = params_channels(params); + switch (params_channels(params)) { + case 1: + case 2: + bclk_rate *= 2; + break; + default: + bclk_rate *= 4; + break; + } + /* Try to find an appropriate sample rate; look for an exact match. */ for (i = 0; i < ARRAY_SIZE(srs); i++) if (srs[i].rate == params_rate(params)) diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h index f142ec1..ccbce57 100644 --- a/sound/soc/codecs/wm8994.h +++ b/sound/soc/codecs/wm8994.h @@ -77,6 +77,7 @@ struct wm8994_priv { int sysclk_rate[2]; int mclk[2]; int aifclk[2]; + int channels[2]; struct wm8994_fll_config fll[2], fll_suspend[2]; struct completion fll_locked[2]; bool fll_locked_irq; -- cgit v0.10.2 From b6e0e543f75729f207b9c72b0162ae61170635b2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 12:52:39 +0200 Subject: drm/i915: clear the entire sdvo infoframe buffer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like in the case of native hdmi, which is fixed already in commit adf00b26d18e1b3570451296e03bcb20e4798cdd Author: Paulo Zanoni Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by: Jürg Billeter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: stable@vger.kernel.org Cc: Paulo Zanoni Cc: Ben Hutchings Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index c01d97d..79d308d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -894,6 +894,45 @@ static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo) } #endif +static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo, + unsigned if_index, uint8_t tx_rate, + uint8_t *data, unsigned length) +{ + uint8_t set_buf_index[2] = { if_index, 0 }; + uint8_t hbuf_size, tmp[8]; + int i; + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2)) + return false; + + if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO, + &hbuf_size, 1)) + return false; + + /* Buffer size is 0 based, hooray! */ + hbuf_size++; + + DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n", + if_index, length, hbuf_size); + + for (i = 0; i < hbuf_size; i += 8) { + memset(tmp, 0, 8); + if (i < length) + memcpy(tmp, data + i, min_t(unsigned, 8, length - i)); + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_DATA, + tmp, 8)) + return false; + } + + return intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_TXRATE, + &tx_rate, 1); +} + static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) { struct dip_infoframe avi_if = { @@ -901,11 +940,7 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) .ver = DIP_VERSION_AVI, .len = DIP_LEN_AVI, }; - uint8_t tx_rate = SDVO_HBUF_TX_VSYNC; - uint8_t set_buf_index[2] = { 1, 0 }; uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)]; - uint64_t *data = (uint64_t *)sdvo_data; - unsigned i; intel_dip_infoframe_csum(&avi_if); @@ -915,22 +950,9 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) sdvo_data[3] = avi_if.checksum; memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi)); - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_INDEX, - set_buf_index, 2)) - return false; - - for (i = 0; i < sizeof(sdvo_data); i += 8) { - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_DATA, - data, 8)) - return false; - data++; - } - - return intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_TXRATE, - &tx_rate, 1); + return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF, + SDVO_HBUF_TX_VSYNC, + sdvo_data, sizeof(sdvo_data)); } static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo) diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 9d03014..770bdd6 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -708,6 +708,8 @@ struct intel_sdvo_enhancements_arg { #define SDVO_CMD_SET_AUDIO_STAT 0x91 #define SDVO_CMD_GET_AUDIO_STAT 0x92 #define SDVO_CMD_SET_HBUF_INDEX 0x93 + #define SDVO_HBUF_INDEX_ELD 0 + #define SDVO_HBUF_INDEX_AVI_IF 1 #define SDVO_CMD_GET_HBUF_INDEX 0x94 #define SDVO_CMD_GET_HBUF_INFO 0x95 #define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 -- cgit v0.10.2 From 168bfeef7bba3f9784f7540b053e4ac72b769ce9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 23 Oct 2012 14:09:39 -0700 Subject: amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[] If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by: Denis Kirjanov Cc: stable@vger.kernel.org Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Borislav Petkov diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 5a297a2..cc8e7c7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -170,8 +170,11 @@ static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) * memory controller and apply to register. Search for the first * bandwidth entry that is greater or equal than the setting requested * and program that. If at last entry, turn off DRAM scrubbing. + * + * If no suitable bandwidth is found, turn off DRAM scrubbing entirely + * by falling back to the last element in scrubrates[]. */ - for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { + for (i = 0; i < ARRAY_SIZE(scrubrates) - 1; i++) { /* * skip scrub rates which aren't recommended * (see F10 BKDG, F3x58) @@ -181,12 +184,6 @@ static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) if (scrubrates[i].bandwidth <= new_bw) break; - - /* - * if no suitable bandwidth found, turn off DRAM scrubbing - * entirely by falling back to the last element in the - * scrubrates array. - */ } scrubval = scrubrates[i].scrubval; -- cgit v0.10.2 From d0bea455dd48da1ecbd04fedf00eb89437455fdc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 23 Oct 2012 11:35:47 -0400 Subject: SUNRPC: Clear the connect flag when socket state is TCP_CLOSE_WAIT This is needed to ensure that we call xprt_connect() upon the next call to call_connect(). Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org Tested-by: Chris Perl diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index aaaadfb..6e6967d 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1516,6 +1516,7 @@ static void xs_tcp_state_change(struct sock *sk) case TCP_CLOSE_WAIT: /* The server initiated a shutdown of the socket */ xprt->connect_cookie++; + clear_bit(XPRT_CONNECTED, &xprt->state); xs_tcp_force_close(xprt); case TCP_CLOSING: /* -- cgit v0.10.2 From b9d2bb2ee537424a7f855e1f93eed44eb9ee0854 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 23 Oct 2012 11:40:02 -0400 Subject: Revert "SUNRPC: Ensure we close the socket on EPIPE errors too..." This reverts commit 55420c24a0d4d1fce70ca713f84aa00b6b74a70e. Now that we clear the connected flag when entering TCP_CLOSE_WAIT, the deadlock described in this commit is no longer possible. Instead, the resulting call to xs_tcp_shutdown() can interfere with pending reconnection attempts. Reported-by: Chris Perl Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org Tested-by: Chris Perl diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 6e6967d..7e2dd0d 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -737,10 +737,10 @@ static int xs_tcp_send_request(struct rpc_task *task) dprintk("RPC: sendmsg returned unrecognized error %d\n", -status); case -ECONNRESET: - case -EPIPE: xs_tcp_shutdown(xprt); case -ECONNREFUSED: case -ENOTCONN: + case -EPIPE: clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags); } -- cgit v0.10.2 From 4bc1e68ed6a8b59be8a79eb719be515a55c7bc68 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 23 Oct 2012 17:50:07 -0400 Subject: SUNRPC: Prevent races in xs_abort_connection() The call to xprt_disconnect_done() that is triggered by a successful connection reset will trigger another automatic wakeup of all tasks on the xprt->pending rpc_wait_queue. In particular it will cause an early wake up of the task that called xprt_connect(). All we really want to do here is clear all the socket-specific state flags, so we split that functionality out of xs_sock_mark_closed() into a helper that can be called by xs_abort_connection() Reported-by: Chris Perl Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org Tested-by: Chris Perl diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 7e2dd0d..1f105c2 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1453,7 +1453,7 @@ static void xs_tcp_cancel_linger_timeout(struct rpc_xprt *xprt) xprt_clear_connecting(xprt); } -static void xs_sock_mark_closed(struct rpc_xprt *xprt) +static void xs_sock_reset_connection_flags(struct rpc_xprt *xprt) { smp_mb__before_clear_bit(); clear_bit(XPRT_CONNECTION_ABORT, &xprt->state); @@ -1461,6 +1461,11 @@ static void xs_sock_mark_closed(struct rpc_xprt *xprt) clear_bit(XPRT_CLOSE_WAIT, &xprt->state); clear_bit(XPRT_CLOSING, &xprt->state); smp_mb__after_clear_bit(); +} + +static void xs_sock_mark_closed(struct rpc_xprt *xprt) +{ + xs_sock_reset_connection_flags(xprt); /* Mark transport as closed and wake up all pending tasks */ xprt_disconnect_done(xprt); } @@ -2051,10 +2056,8 @@ static void xs_abort_connection(struct sock_xprt *transport) any.sa_family = AF_UNSPEC; result = kernel_connect(transport->sock, &any, sizeof(any), 0); if (!result) - xs_sock_mark_closed(&transport->xprt); - else - dprintk("RPC: AF_UNSPEC connect return code %d\n", - result); + xs_sock_reset_connection_flags(&transport->xprt); + dprintk("RPC: AF_UNSPEC connect return code %d\n", result); } static void xs_tcp_reuse_connection(struct sock_xprt *transport) -- cgit v0.10.2 From f878b657ce8e7d3673afe48110ec208a29e38c4a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Oct 2012 17:14:36 -0400 Subject: SUNRPC: Get rid of the xs_error_report socket callback Chris Perl reports that we're seeing races between the wakeup call in xs_error_report and the connect attempts. Basically, Chris has shown that in certain circumstances, the call to xs_error_report causes the rpc_task that is responsible for reconnecting to wake up early, thus triggering a disconnect and retry. Since the sk->sk_error_report() calls in the socket layer are always followed by a tcp_done() in the cases where we care about waking up the rpc_tasks, just let the state_change callbacks take responsibility for those wake ups. Reported-by: Chris Perl Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org Tested-by: Chris Perl diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 1f105c2..75853ca 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -254,7 +254,6 @@ struct sock_xprt { void (*old_data_ready)(struct sock *, int); void (*old_state_change)(struct sock *); void (*old_write_space)(struct sock *); - void (*old_error_report)(struct sock *); }; /* @@ -781,7 +780,6 @@ static void xs_save_old_callbacks(struct sock_xprt *transport, struct sock *sk) transport->old_data_ready = sk->sk_data_ready; transport->old_state_change = sk->sk_state_change; transport->old_write_space = sk->sk_write_space; - transport->old_error_report = sk->sk_error_report; } static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *sk) @@ -789,7 +787,6 @@ static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *s sk->sk_data_ready = transport->old_data_ready; sk->sk_state_change = transport->old_state_change; sk->sk_write_space = transport->old_write_space; - sk->sk_error_report = transport->old_error_report; } static void xs_reset_transport(struct sock_xprt *transport) @@ -1546,25 +1543,6 @@ static void xs_tcp_state_change(struct sock *sk) read_unlock_bh(&sk->sk_callback_lock); } -/** - * xs_error_report - callback mainly for catching socket errors - * @sk: socket - */ -static void xs_error_report(struct sock *sk) -{ - struct rpc_xprt *xprt; - - read_lock_bh(&sk->sk_callback_lock); - if (!(xprt = xprt_from_sock(sk))) - goto out; - dprintk("RPC: %s client %p...\n" - "RPC: error %d\n", - __func__, xprt, sk->sk_err); - xprt_wake_pending_tasks(xprt, -EAGAIN); -out: - read_unlock_bh(&sk->sk_callback_lock); -} - static void xs_write_space(struct sock *sk) { struct socket *sock; @@ -1864,7 +1842,6 @@ static int xs_local_finish_connecting(struct rpc_xprt *xprt, sk->sk_user_data = xprt; sk->sk_data_ready = xs_local_data_ready; sk->sk_write_space = xs_udp_write_space; - sk->sk_error_report = xs_error_report; sk->sk_allocation = GFP_ATOMIC; xprt_clear_connected(xprt); @@ -1989,7 +1966,6 @@ static void xs_udp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) sk->sk_user_data = xprt; sk->sk_data_ready = xs_udp_data_ready; sk->sk_write_space = xs_udp_write_space; - sk->sk_error_report = xs_error_report; sk->sk_no_check = UDP_CSUM_NORCV; sk->sk_allocation = GFP_ATOMIC; @@ -2102,7 +2078,6 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) sk->sk_data_ready = xs_tcp_data_ready; sk->sk_state_change = xs_tcp_state_change; sk->sk_write_space = xs_tcp_write_space; - sk->sk_error_report = xs_error_report; sk->sk_allocation = GFP_ATOMIC; /* socket options */ -- cgit v0.10.2 From a4ee8d978e47e79d536226dccb48991f70091168 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 23 Oct 2012 13:51:58 -0400 Subject: LOCKD: fix races in nsm_client_get Commit e9406db20fecbfcab646bad157b4cfdc7cadddfb (lockd: per-net NSM client creation and destruction helpers introduced) contains a nasty race on initialisation of the per-net NSM client because it doesn't check whether or not the client is set after grabbing the nsm_create_mutex. Reported-by: Nix Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c index e4fb3ba..fe69560 100644 --- a/fs/lockd/mon.c +++ b/fs/lockd/mon.c @@ -85,29 +85,38 @@ static struct rpc_clnt *nsm_create(struct net *net) return rpc_create(&args); } +static struct rpc_clnt *nsm_client_set(struct lockd_net *ln, + struct rpc_clnt *clnt) +{ + spin_lock(&ln->nsm_clnt_lock); + if (ln->nsm_users == 0) { + if (clnt == NULL) + goto out; + ln->nsm_clnt = clnt; + } + clnt = ln->nsm_clnt; + ln->nsm_users++; +out: + spin_unlock(&ln->nsm_clnt_lock); + return clnt; +} + static struct rpc_clnt *nsm_client_get(struct net *net) { - static DEFINE_MUTEX(nsm_create_mutex); - struct rpc_clnt *clnt; + struct rpc_clnt *clnt, *new; struct lockd_net *ln = net_generic(net, lockd_net_id); - spin_lock(&ln->nsm_clnt_lock); - if (ln->nsm_users) { - ln->nsm_users++; - clnt = ln->nsm_clnt; - spin_unlock(&ln->nsm_clnt_lock); + clnt = nsm_client_set(ln, NULL); + if (clnt != NULL) goto out; - } - spin_unlock(&ln->nsm_clnt_lock); - mutex_lock(&nsm_create_mutex); - clnt = nsm_create(net); - if (!IS_ERR(clnt)) { - ln->nsm_clnt = clnt; - smp_wmb(); - ln->nsm_users = 1; - } - mutex_unlock(&nsm_create_mutex); + clnt = new = nsm_create(net); + if (IS_ERR(clnt)) + goto out; + + clnt = nsm_client_set(ln, new); + if (clnt != new) + rpc_shutdown_client(new); out: return clnt; } -- cgit v0.10.2 From e498daa81295d02f7359af313c2b7f87e1062207 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 24 Oct 2012 08:53:35 -0400 Subject: LOCKD: Clear ln->nsm_clnt only when ln->nsm_users is zero The current code is clearing it in all cases _except_ when zero. Reported-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c index fe69560..3d7e09b 100644 --- a/fs/lockd/mon.c +++ b/fs/lockd/mon.c @@ -124,18 +124,16 @@ out: static void nsm_client_put(struct net *net) { struct lockd_net *ln = net_generic(net, lockd_net_id); - struct rpc_clnt *clnt = ln->nsm_clnt; - int shutdown = 0; + struct rpc_clnt *clnt = NULL; spin_lock(&ln->nsm_clnt_lock); - if (ln->nsm_users) { - if (--ln->nsm_users) - ln->nsm_clnt = NULL; - shutdown = !ln->nsm_users; + ln->nsm_users--; + if (ln->nsm_users == 0) { + clnt = ln->nsm_clnt; + ln->nsm_clnt = NULL; } spin_unlock(&ln->nsm_clnt_lock); - - if (shutdown) + if (clnt != NULL) rpc_shutdown_client(clnt); } -- cgit v0.10.2 From d0078e72314df2e5ede03f2102cddde06767c374 Mon Sep 17 00:00:00 2001 From: Hiro Sugawara Date: Thu, 18 Oct 2012 08:35:10 +0300 Subject: iommu/tegra: smmu: Fix deadly typo Fix a deadly typo in macro definition. Cc: stable@vger.kernel.org Signed-off-by: Hiro Sugawara Signed-off-by: Hiroshi Doyu Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 0b4d62e..a649f14 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -200,7 +200,7 @@ enum { #define SMMU_ADDR_TO_PFN(addr) ((addr) >> 12) #define SMMU_ADDR_TO_PDN(addr) ((addr) >> 22) -#define SMMU_PDN_TO_ADDR(addr) ((pdn) << 22) +#define SMMU_PDN_TO_ADDR(pdn) ((pdn) << 22) #define _READABLE (1 << SMMU_PTB_DATA_ASID_READABLE_SHIFT) #define _WRITABLE (1 << SMMU_PTB_DATA_ASID_WRITABLE_SHIFT) -- cgit v0.10.2 From 2e680dd61e80592385338bfbeb86833d1c60546c Mon Sep 17 00:00:00 2001 From: John Johansen Date: Wed, 24 Oct 2012 06:27:32 -0700 Subject: apparmor: fix IRQ stack overflow during free_profile BugLink: http://bugs.launchpad.net/bugs/1056078 Profile replacement can cause long chains of profiles to build up when the profile being replaced is pinned. When the pinned profile is finally freed, it puts the reference to its replacement, which may in turn nest another call to free_profile on the stack. Because this may happen for each profile in the replacedby chain this can result in a recusion that causes the stack to overflow. Break this nesting by directly walking the chain of replacedby profiles (ie. use iteration instead of recursion to free the list). This results in at most 2 levels of free_profile being called, while freeing a replacedby chain. Signed-off-by: John Johansen Signed-off-by: James Morris diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c index cf5fd22..8132003 100644 --- a/security/apparmor/policy.c +++ b/security/apparmor/policy.c @@ -724,6 +724,8 @@ fail: */ static void free_profile(struct aa_profile *profile) { + struct aa_profile *p; + AA_DEBUG("%s(%p)\n", __func__, profile); if (!profile) @@ -751,7 +753,27 @@ static void free_profile(struct aa_profile *profile) aa_put_dfa(profile->xmatch); aa_put_dfa(profile->policy.dfa); - aa_put_profile(profile->replacedby); + /* put the profile reference for replacedby, but not via + * put_profile(kref_put). + * replacedby can form a long chain that can result in cascading + * frees that blows the stack because kref_put makes a nested fn + * call (it looks like recursion, with free_profile calling + * free_profile) for each profile in the chain lp#1056078. + */ + for (p = profile->replacedby; p; ) { + if (atomic_dec_and_test(&p->base.count.refcount)) { + /* no more refs on p, grab its replacedby */ + struct aa_profile *next = p->replacedby; + /* break the chain */ + p->replacedby = NULL; + /* now free p, chain is broken */ + free_profile(p); + + /* follow up with next profile in the chain */ + p = next; + } else + break; + } kzfree(profile); } -- cgit v0.10.2 From 9690fb169b433a66485c808e4fc352b8a0f8d866 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Oct 2012 14:19:53 +0200 Subject: mac80211: use blacklist for duplicate IE check Instead of the current whitelist which accepts duplicates only for the quiet and vendor IEs, use a blacklist of all IEs (that we currently parse) that can't be duplicated. This avoids detecting a beacon as corrupt in the future when new IEs are added that can be duplicated. Cc: stable@vger.kernel.org Signed-off-by: Paul Stewart Signed-off-by: Johannes Berg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 22ca350..e6e4bda 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -643,13 +643,41 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, break; } - if (id != WLAN_EID_VENDOR_SPECIFIC && - id != WLAN_EID_QUIET && - test_bit(id, seen_elems)) { - elems->parse_error = true; - left -= elen; - pos += elen; - continue; + switch (id) { + case WLAN_EID_SSID: + case WLAN_EID_SUPP_RATES: + case WLAN_EID_FH_PARAMS: + case WLAN_EID_DS_PARAMS: + case WLAN_EID_CF_PARAMS: + case WLAN_EID_TIM: + case WLAN_EID_IBSS_PARAMS: + case WLAN_EID_CHALLENGE: + case WLAN_EID_RSN: + case WLAN_EID_ERP_INFO: + case WLAN_EID_EXT_SUPP_RATES: + case WLAN_EID_HT_CAPABILITY: + case WLAN_EID_HT_OPERATION: + case WLAN_EID_VHT_CAPABILITY: + case WLAN_EID_VHT_OPERATION: + case WLAN_EID_MESH_ID: + case WLAN_EID_MESH_CONFIG: + case WLAN_EID_PEER_MGMT: + case WLAN_EID_PREQ: + case WLAN_EID_PREP: + case WLAN_EID_PERR: + case WLAN_EID_RANN: + case WLAN_EID_CHANNEL_SWITCH: + case WLAN_EID_EXT_CHANSWITCH_ANN: + case WLAN_EID_COUNTRY: + case WLAN_EID_PWR_CONSTRAINT: + case WLAN_EID_TIMEOUT_INTERVAL: + if (test_bit(id, seen_elems)) { + elems->parse_error = true; + left -= elen; + pos += elen; + continue; + } + break; } if (calc_crc && id < 64 && (filter & (1ULL << id))) -- cgit v0.10.2 From 1bcb04f758c7d3ab9a454525c004bdb8c0fccd98 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 23 Oct 2012 15:53:16 +0200 Subject: drm/radeon: fix and simplify pot argument checks v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GART and VRAM size limits need to be a power of two. Fix values greater than 1GB and simplify those checks a bit. v2: also fix radeon_vram_limit usage, and simplify test even more. v3: agd5f: fix spelling as noticed by Klaus Schnass Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index bd13ca0..e2f5f88 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -355,6 +355,8 @@ int radeon_wb_init(struct radeon_device *rdev) */ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 base) { + uint64_t limit = (uint64_t)radeon_vram_limit << 20; + mc->vram_start = base; if (mc->mc_vram_size > (0xFFFFFFFF - base + 1)) { dev_warn(rdev->dev, "limiting VRAM to PCI aperture size\n"); @@ -368,8 +370,8 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 mc->mc_vram_size = mc->aper_size; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; - if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size) - mc->real_vram_size = radeon_vram_limit; + if (limit && limit < mc->real_vram_size) + mc->real_vram_size = limit; dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n", mc->mc_vram_size >> 20, mc->vram_start, mc->vram_end, mc->real_vram_size >> 20); @@ -835,6 +837,19 @@ static unsigned int radeon_vga_set_decode(void *cookie, bool state) } /** + * radeon_check_pot_argument - check that argument is a power of two + * + * @arg: value to check + * + * Validates that a certain argument is a power of two (all asics). + * Returns true if argument is valid. + */ +static bool radeon_check_pot_argument(int arg) +{ + return (arg & (arg - 1)) == 0; +} + +/** * radeon_check_arguments - validate module params * * @rdev: radeon_device pointer @@ -845,52 +860,25 @@ static unsigned int radeon_vga_set_decode(void *cookie, bool state) static void radeon_check_arguments(struct radeon_device *rdev) { /* vramlimit must be a power of two */ - switch (radeon_vram_limit) { - case 0: - case 4: - case 8: - case 16: - case 32: - case 64: - case 128: - case 256: - case 512: - case 1024: - case 2048: - case 4096: - break; - default: + if (!radeon_check_pot_argument(radeon_vram_limit)) { dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n", radeon_vram_limit); radeon_vram_limit = 0; - break; } - radeon_vram_limit = radeon_vram_limit << 20; + /* gtt size must be power of two and greater or equal to 32M */ - switch (radeon_gart_size) { - case 4: - case 8: - case 16: + if (radeon_gart_size < 32) { dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n", radeon_gart_size); radeon_gart_size = 512; - break; - case 32: - case 64: - case 128: - case 256: - case 512: - case 1024: - case 2048: - case 4096: - break; - default: + + } else if (!radeon_check_pot_argument(radeon_gart_size)) { dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n", radeon_gart_size); radeon_gart_size = 512; - break; } - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + rdev->mc.gtt_size = (uint64_t)radeon_gart_size << 20; + /* AGP mode can only be -1, 1, 2, 4, 8 */ switch (radeon_agpmode) { case -1: -- cgit v0.10.2 From 59240ee3e8f0dbd3d35db90cc4960143cb14be85 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 23 Oct 2012 15:53:17 +0200 Subject: drm/radeon: use vzalloc for gart pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When allocating more than 2GB of GART the array of pages gets to big for kzalloc, use vzalloc instead. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index e9e8953..4debd60 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -355,14 +355,13 @@ int radeon_gart_init(struct radeon_device *rdev) DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n", rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages); /* Allocate pages table */ - rdev->gart.pages = kzalloc(sizeof(void *) * rdev->gart.num_cpu_pages, - GFP_KERNEL); + rdev->gart.pages = vzalloc(sizeof(void *) * rdev->gart.num_cpu_pages); if (rdev->gart.pages == NULL) { radeon_gart_fini(rdev); return -ENOMEM; } - rdev->gart.pages_addr = kzalloc(sizeof(dma_addr_t) * - rdev->gart.num_cpu_pages, GFP_KERNEL); + rdev->gart.pages_addr = vzalloc(sizeof(dma_addr_t) * + rdev->gart.num_cpu_pages); if (rdev->gart.pages_addr == NULL) { radeon_gart_fini(rdev); return -ENOMEM; @@ -388,8 +387,8 @@ void radeon_gart_fini(struct radeon_device *rdev) radeon_gart_unbind(rdev, 0, rdev->gart.num_cpu_pages); } rdev->gart.ready = false; - kfree(rdev->gart.pages); - kfree(rdev->gart.pages_addr); + vfree(rdev->gart.pages); + vfree(rdev->gart.pages_addr); rdev->gart.pages = NULL; rdev->gart.pages_addr = NULL; -- cgit v0.10.2 From 6c0d112f1fb4abba724065daa8ffbc9f0e171dc1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 23 Oct 2012 15:53:18 +0200 Subject: drm/radeon: move size limits to gem_object_create. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver internal users shouldn't be limited in their allocation size. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index f38fbcc..dfee7bb 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -53,6 +53,7 @@ int radeon_gem_object_create(struct radeon_device *rdev, int size, struct drm_gem_object **obj) { struct radeon_bo *robj; + unsigned long max_size; int r; *obj = NULL; @@ -60,6 +61,15 @@ int radeon_gem_object_create(struct radeon_device *rdev, int size, if (alignment < PAGE_SIZE) { alignment = PAGE_SIZE; } + + /* maximun bo size is the minimun btw visible vram and gtt size */ + max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size); + if (size > max_size) { + printk(KERN_WARNING "%s:%d alloc size %dMb bigger than %ldMb limit\n", + __func__, __LINE__, size >> 20, max_size >> 20); + return -ENOMEM; + } + r = radeon_bo_create(rdev, size, alignment, kernel, initial_domain, NULL, &robj); if (r) { if (r != -ERESTARTSYS) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 8b27dd6..f404944 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -105,7 +105,6 @@ int radeon_bo_create(struct radeon_device *rdev, struct radeon_bo *bo; enum ttm_bo_type type; unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT; - unsigned long max_size = 0; size_t acc_size; int r; @@ -121,14 +120,6 @@ int radeon_bo_create(struct radeon_device *rdev, } *bo_ptr = NULL; - /* maximun bo size is the minimun btw visible vram and gtt size */ - max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size); - if ((page_align << PAGE_SHIFT) >= max_size) { - printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n", - __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20); - return -ENOMEM; - } - acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size, sizeof(struct radeon_bo)); -- cgit v0.10.2 From 0fe7158c8a61ffdd71789de054fbee257c34d054 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 23 Oct 2012 15:53:19 +0200 Subject: drm/radeon: move the retry to gem_object_create MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When internal users want VRAM we shouldn't return GART memory instead. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index dfee7bb..fe5c1f6 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -70,11 +70,17 @@ int radeon_gem_object_create(struct radeon_device *rdev, int size, return -ENOMEM; } +retry: r = radeon_bo_create(rdev, size, alignment, kernel, initial_domain, NULL, &robj); if (r) { - if (r != -ERESTARTSYS) + if (r != -ERESTARTSYS) { + if (initial_domain == RADEON_GEM_DOMAIN_VRAM) { + initial_domain |= RADEON_GEM_DOMAIN_GTT; + goto retry; + } DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n", size, initial_domain, alignment, r); + } return r; } *obj = &robj->gem_base; diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index f404944..b91118c 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -123,7 +123,6 @@ int radeon_bo_create(struct radeon_device *rdev, acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size, sizeof(struct radeon_bo)); -retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) return -ENOMEM; @@ -145,15 +144,6 @@ retry: acc_size, sg, &radeon_ttm_bo_destroy); up_read(&rdev->pm.mclk_lock); if (unlikely(r != 0)) { - if (r != -ERESTARTSYS) { - if (domain == RADEON_GEM_DOMAIN_VRAM) { - domain |= RADEON_GEM_DOMAIN_GTT; - goto retry; - } - dev_err(rdev->dev, - "object_init failed for (%lu, 0x%08X)\n", - size, domain); - } return r; } *bo_ptr = bo; -- cgit v0.10.2 From c9bd773c6dd4a52f32e64af5dbbf9b3834f8569a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 23 Oct 2012 12:42:42 -0400 Subject: drm/radeon: fix ATPX function documentation The ATPX code no longer handles ATRM. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 1aa3f91..5c5e5bb 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -373,11 +373,11 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, } /** - * radeon_atpx_pci_probe_handle - look up the ATRM and ATPX handles + * radeon_atpx_pci_probe_handle - look up the ATPX handle * * @pdev: pci device * - * Look up the ATPX and ATRM handles (all asics). + * Look up the ATPX handles (all asics). * Returns true if the handles are found, false if not. */ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) -- cgit v0.10.2 From 0b90365e7a32317b948583c4b5c2712d84610b08 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 23 Oct 2012 17:57:54 -0400 Subject: drm/radeon: fix ATPX regression in acpi rework Copy and paste typo in the apci rework. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=49351 Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 5c5e5bb..37f6a90 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -87,7 +87,7 @@ static union acpi_object *radeon_atpx_call(acpi_handle handle, int function, atpx_arg_elements[1].integer.value = 0; } - status = acpi_evaluate_object(handle, "ATPX", &atpx_arg, &buffer); + status = acpi_evaluate_object(handle, NULL, &atpx_arg, &buffer); /* Fail only if calling the method fails and ATPX is supported */ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { -- cgit v0.10.2 From 11930c530f3edf81160e4962e363d579f5cdce7e Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Fri, 14 Sep 2012 17:01:29 +0800 Subject: ARM: at91/tc: fix typo in the DT document Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.4] diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index ecc81e3..d187e9f 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -8,7 +8,7 @@ PIT Timer required properties: shared across all System Controller members. TC/TCLIB Timer required properties: -- compatible: Should be "atmel,-pit". +- compatible: Should be "atmel,-tcb". can be "at91rm9200" or "at91sam9x5" - reg: Should contain registers location and length - interrupts: Should contain all interrupts for the TC block -- cgit v0.10.2 From 3d9a0183dd3423353e9e363bcc261c1220d05f9f Mon Sep 17 00:00:00 2001 From: Ivan Shugov Date: Wed, 24 Oct 2012 11:02:44 +0200 Subject: ARM: at91: at91sam9g10: fix SOC type detection Newer at91sam9g10 SoC revision can't be detected, so the kernel can't boot with this kind of kernel panic: "AT91: Impossible to detect the SOC type" CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Atmel AT91SAM9G10-EK Ignoring tag cmdline (using the default kernel command line) bootconsole [earlycon0] enabled Memory policy: ECC disabled, Data cache writeback Kernel panic - not syncing: AT91: Impossible to detect the SOC type [] (unwind_backtrace+0x0/0xe0) from [] (panic+0x78/0x1cc) [] (panic+0x78/0x1cc) from [] (at91_map_io+0x90/0xc8) [] (at91_map_io+0x90/0xc8) from [] (paging_init+0x564/0x6d0) [] (paging_init+0x564/0x6d0) from [] (setup_arch+0x464/0x704) [] (setup_arch+0x464/0x704) from [] (start_kernel+0x6c/0x2d4) [] (start_kernel+0x6c/0x2d4) from [<20008040>] (0x20008040) The reason for this is that the Debug Unit Chip ID Register has changed between Engineering Sample and definitive revision of the SoC. Changing the check of cidr to socid will address the problem. We do not integrate this check to the list just above because we also have to make sure that the extended id is disregarded. Signed-off-by: Ivan Shugov [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.1] # since commit 8c3583b6 diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b..6a3d4bb 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } -- cgit v0.10.2 From 738a0fd752dc60e20beeda6f2f0f62e58dc0e344 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 24 Oct 2012 16:09:57 +0200 Subject: ARM: at91: fix external interrupts in non-DT case Management of external interrupts has changed but the non-DT code has not integrated these changes. Add a mask to pass external irq specification from SoC specific code to the at91_aic_init() function. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [v3.6] diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f496506..b62f560e 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e..febc2ee 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 6a3d4bb..0b32c81 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); -- cgit v0.10.2 From 69e7ea04c9365626c0963ff09bbaa3a1b49e293a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 24 Oct 2012 16:19:47 +0200 Subject: ARM: at91: fix external interrupt specification in board code Since the switch to sparse irq, we have to add the NR_IRQS_LEGACY offset to static irq numbers. It has been forgotten on these SPI irq definitions in board code. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [v3.6] diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd..6960778 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1..a9167dd 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e174..b87dbe2 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; -- cgit v0.10.2 From b6edfbeacd5804038ea7ea8821a83ad704c107cc Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Mon, 1 Oct 2012 22:46:09 +0200 Subject: ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. Signed-off-by: Marek Belisko Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db..e6391a4 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; -- cgit v0.10.2 From 7840487cd6298f9f931103b558290d8d98d41c49 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 15 Oct 2012 17:30:27 +0800 Subject: ARM: at91/i2c: change id to let i2c-gpio work The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen Acked-by: Jean Delvare Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [very long time] diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189..7cd8053 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b868..44385a4 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17..0256a00 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220..23b6384 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca054..3d2c81d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; -- cgit v0.10.2 From 302090a66b85bb82023b07a715f9c9a347be2ac8 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 15 Oct 2012 17:30:28 +0800 Subject: ARM: at91/i2c: change id to let i2c-at91 work The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565..5269825 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7cd8053..1e122bc 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93..f820261 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 44385a4..aa1e587 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb..04295c0 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 0256a00..b948769 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d03..d6f9c23 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 23b6384..cb85da2 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 3d2c81d..5047bdc 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; -- cgit v0.10.2 From 08d04a135a1c2e24c4d4bc7bbafee5e0e58f80c6 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 17 Oct 2012 15:41:31 +0200 Subject: ARM: at91: drop duplicated config SOC_AT91SAM9 entry Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b142071..0436242 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T -- cgit v0.10.2 From 0c7e92075f6e61bfc90ec2664c034b04bc157315 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 14 Oct 2012 22:15:48 +0200 Subject: rtlwifi: pass rx setup error code to caller If _rtl_usb_receive fails, the device is probably not ready. Hence the error code should be passed to the caller, so it can react accordingly and notify the user. Signed-off-by: Christian Lamparter Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 030beb4..e3ea4b3 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -673,7 +673,7 @@ static int rtl_usb_start(struct ieee80211_hw *hw) set_hal_start(rtlhal); /* Start bulk IN */ - _rtl_usb_receive(hw); + err = _rtl_usb_receive(hw); } return err; -- cgit v0.10.2 From 761ce8c41ed20ee3af77f2df527edc3f92e6f3bf Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 16 Oct 2012 14:34:12 +0200 Subject: rt2x00: usb: fix reset resume Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann Reported-and-tested-by: Stephen Boyd Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index a12e84f..6b2e1e43 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1988,6 +1988,7 @@ static struct usb_driver rt2500usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index c9e9370..3b8fb5a 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1282,6 +1282,7 @@ static struct usb_driver rt2800usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index e5eb43b..24eec66 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2535,6 +2535,7 @@ static struct usb_driver rt73usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .reset_resume = rt2x00usb_resume, .disable_hub_initiated_lpm = 1, }; -- cgit v0.10.2 From 763cbac07674a648f1377b21ca66f577c103fa9a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 16 Oct 2012 21:31:49 +0530 Subject: ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter. One has an internal antenna, the other has an external antenna and name suffix EXT. They have separate USB ids and in distribution openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows: 0cf3 Atheros Communications, Inc. ... b002 Ubiquiti WiFiStation 802.11n [Atheros AR9271] b003 Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271] Add b002 Ubiquiti WiFiStation in the PID/VID list. Reported-by: Roger Price Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 924c461..f5dda84 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -38,6 +38,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x040D, 0x3801) }, /* VIA */ { USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */ + { USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */ { USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */ { USB_DEVICE(0x0cf3, 0x7015), -- cgit v0.10.2 From 73b26df5fa1a6245d6fc982362518b620bc7c2fe Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:50:43 +0200 Subject: Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd. This commit is reducing tx power by at least 10 db on some devices, e.g. the Buffalo WZR-HP-G450H. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 89bf94d..6f7cf49 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -534,107 +534,107 @@ static const u32 ar9300_2p2_baseband_core[][2] = { static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, - {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, - {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, - {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, - {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, - {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, - {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, - {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, - {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, - {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, - {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, - {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, - {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, - {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, - {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, - {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, - {0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83}, - {0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84}, - {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, - {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, - {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, - {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, - {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, - {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400}, + {0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402}, + {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec}, {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002}, {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004}, {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200}, - {0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202}, - {0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400}, - {0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402}, - {0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404}, - {0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603}, - {0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02}, - {0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04}, - {0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20}, - {0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20}, - {0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22}, - {0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24}, - {0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640}, - {0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660}, - {0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861}, - {0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81}, - {0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83}, - {0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84}, - {0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3}, - {0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5}, - {0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9}, - {0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb}, - {0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, - {0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec}, + {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400}, + {0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402}, + {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660}, + {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861}, + {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81}, + {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83}, + {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84}, + {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3}, + {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5}, + {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9}, + {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb}, + {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, + {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, - {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, - {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, - {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, - {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, - {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, - {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, - {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, - {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000}, + {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501}, + {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, - {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, - {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, - {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, - {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001}, {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, }; -- cgit v0.10.2 From 9495b31ad7e2b479501abb36a62789d59ee406fc Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Thu, 18 Oct 2012 18:10:56 +0800 Subject: brcmfmac: fix potential NULL dereference Fix a samtch warnings catched by Fengguang's 0-DAY system: + drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571) Cc: John W. Linville Signed-off-by: Yuanhan Liu Acked-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 411dfe7..a6f1e81 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3569,7 +3569,7 @@ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy, if (!request || !request->n_ssids || !request->n_match_sets) { WL_ERR("Invalid sched scan req!! n_ssids:%d\n", - request->n_ssids); + request ? request->n_ssids : 0); return -EINVAL; } -- cgit v0.10.2 From dcd5c79c9a3a7ac08bdce089fec810677ce6efe8 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 19 Oct 2012 19:01:59 -0700 Subject: mwifiex: return -EBUSY if specific scan request cannot be honored Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Reviewed-by: Ryan Cairns Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 00b658d..9171aae 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1843,21 +1843,18 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv, struct cfg80211_ssid *req_ssid) { struct mwifiex_adapter *adapter = priv->adapter; - int ret = 0; + int ret; struct mwifiex_user_scan_cfg *scan_cfg; - if (!req_ssid) - return -1; - if (adapter->scan_processing) { - dev_dbg(adapter->dev, "cmd: Scan already in process...\n"); - return ret; + dev_err(adapter->dev, "cmd: Scan already in process...\n"); + return -EBUSY; } if (priv->scan_block) { - dev_dbg(adapter->dev, + dev_err(adapter->dev, "cmd: Scan is blocked during association...\n"); - return ret; + return -EBUSY; } scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); -- cgit v0.10.2 From 6fcf2b10533bf51c67f0286ddba16e958e7ed972 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 19 Oct 2012 19:02:00 -0700 Subject: mwifiex: clean up scan state on error De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Tested-by: Paul Stewart Reviewed-by: Ryan Cairns Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 0679458..780d3e1 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1825,8 +1825,6 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, return -EBUSY; } - priv->scan_request = request; - priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); if (!priv->user_scan_cfg) { @@ -1834,6 +1832,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, return -ENOMEM; } + priv->scan_request = request; + priv->user_scan_cfg->num_ssids = request->n_ssids; priv->user_scan_cfg->ssid_list = request->ssids; @@ -1870,6 +1870,9 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, ret = mwifiex_scan_networks(priv, priv->user_scan_cfg); if (ret) { dev_err(priv->adapter->dev, "scan failed: %d\n", ret); + priv->scan_request = NULL; + kfree(priv->user_scan_cfg); + priv->user_scan_cfg = NULL; return ret; } -- cgit v0.10.2 From f89ff6441df06abc2d95f3ef67525923032d6283 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 24 Oct 2012 08:57:16 -0500 Subject: b43: Fix oops on unload when firmware not found When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger Tested-by: Markus Kanet Cc: Stable [V3.3.0+ (the patch will need to be refactored)] Cc: Markus Kanet Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 73730e9..c5a99c8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -5404,6 +5404,8 @@ static void b43_bcma_remove(struct bcma_device *core) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ if (wl->current_dev == wldev && wl->hw_registred) { b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); @@ -5478,6 +5480,8 @@ static void b43_ssb_remove(struct ssb_device *sdev) cancel_work_sync(&wldev->restart_work); B43_WARN_ON(!wl); + if (!wldev->fw.ucode.data) + return; /* NULL if firmware never loaded */ if (wl->current_dev == wldev && wl->hw_registred) { b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); -- cgit v0.10.2 From f7bc5051667b74c3861f79eed98c60d5c3b883f7 Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Wed, 24 Oct 2012 10:23:09 -0400 Subject: USB: serial: Fix memory leak in sierra_release() I found a memory leak in sierra_release() (well sierra_probe() I guess) that looses 8 bytes each time the driver releases a device. Signed-off-by: Len Sorensen Acked-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 01d882c..76ef95b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -959,6 +959,7 @@ static void sierra_release(struct usb_serial *serial) continue; kfree(portdata); } + kfree(serial->private); } #ifdef CONFIG_PM -- cgit v0.10.2 From 6ede1fd3cb404c0016de6ac529df46d561bd558b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 22 Oct 2012 16:35:18 -0700 Subject: x86, mm: Trim memory in memblock to be page aligned We will not map partial pages, so need to make sure memblock allocation will not allocate those bytes out. Also we will use for_each_mem_pfn_range() to loop to map memory range to keep them consistent. Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin Signed-off-by: H. Peter Anvin Cc: diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ed858e9..df06ade 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1077,6 +1077,9 @@ void __init memblock_x86_fill(void) memblock_add(ei->addr, ei->size); } + /* throw away partial pages */ + memblock_trim_memory(PAGE_SIZE); + memblock_dump_all(); } diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 569d67d..d452ee1 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -57,6 +57,7 @@ int memblock_add(phys_addr_t base, phys_addr_t size); int memblock_remove(phys_addr_t base, phys_addr_t size); int memblock_free(phys_addr_t base, phys_addr_t size); int memblock_reserve(phys_addr_t base, phys_addr_t size); +void memblock_trim_memory(phys_addr_t align); #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, diff --git a/mm/memblock.c b/mm/memblock.c index 931eef1..6259055 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -930,6 +930,30 @@ int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t si return memblock_overlaps_region(&memblock.reserved, base, size) >= 0; } +void __init_memblock memblock_trim_memory(phys_addr_t align) +{ + int i; + phys_addr_t start, end, orig_start, orig_end; + struct memblock_type *mem = &memblock.memory; + + for (i = 0; i < mem->cnt; i++) { + orig_start = mem->regions[i].base; + orig_end = mem->regions[i].base + mem->regions[i].size; + start = round_up(orig_start, align); + end = round_down(orig_end, align); + + if (start == orig_start && end == orig_end) + continue; + + if (start < end) { + mem->regions[i].base = start; + mem->regions[i].size = end - start; + } else { + memblock_remove_region(mem, i); + i--; + } + } +} void __init_memblock memblock_set_current_limit(phys_addr_t limit) { -- cgit v0.10.2 From 1f2ff682ac951ed82cc043cf140d2851084512df Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 22 Oct 2012 16:35:18 -0700 Subject: x86, mm: Use memblock memory loop instead of e820_RAM We need to handle E820_RAM and E820_RESERVED_KERNEL at the same time. Also memblock has page aligned range for ram, so we could avoid mapping partial pages. Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin Signed-off-by: H. Peter Anvin Cc: diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 468e98d..5d888af 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -921,18 +921,19 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_64 if (max_pfn > max_low_pfn) { int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; + unsigned long start, end; + unsigned long start_pfn, end_pfn; - if (ei->addr + ei->size <= 1UL << 32) - continue; + for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, + NULL) { - if (ei->type == E820_RESERVED) + end = PFN_PHYS(end_pfn); + if (end <= (1UL<<32)) continue; + start = PFN_PHYS(start_pfn); max_pfn_mapped = init_memory_mapping( - ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr, - ei->addr + ei->size); + max((1UL<<32), start), end); } /* can we preseve max_low_pfn ?*/ -- cgit v0.10.2 From a4f743851f74fc3e0cc40c13082e65c24139f481 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 16 Oct 2012 17:09:22 +0300 Subject: Revert "serial: omap: fix software flow control" This reverts commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 (serial: omap: fix software flow control). As Russell has pointed out, that commit isn't fixing Software Flow Control at all, and it actually makes it even more broken. It was agreed to revert this commit and use Russell's latest UART patches instead. Cc: Russell King Signed-off-by: Felipe Balbi Acked-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd0..1957a85 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 6ede6fd..6d3d26a 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -671,19 +671,19 @@ serial_omap_configure_xonxoff /* * IXON Flag: - * Flow control for OMAP.TX - * OMAP.RX should listen for XON/XOFF + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXON) - up->efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_TX; /* * IXOFF Flag: - * Flow control for OMAP.RX - * OMAP.TX should send XON/XOFF + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. */ if (termios->c_iflag & IXOFF) - up->efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_RX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); -- cgit v0.10.2 From c0158ca64da5732dfb86a3f28944e9626776692f Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Thu, 18 Oct 2012 16:31:37 -0700 Subject: workqueue: cancel_delayed_work() should return %false if work item is idle 57b30ae77b ("workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()") made cancel_delayed_work() always return %true unless someone else is also trying to cancel the work item, which is broken - if the target work item is idle, the return value should be %false. try_to_grab_pending() indicates that the target work item was idle by zero return value. Use it for return. Note that this brings cancel_delayed_work() in line with __cancel_work_timer() in return value handling. Signed-off-by: Dan Magenheimer Signed-off-by: Tejun Heo LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default> diff --git a/kernel/workqueue.c b/kernel/workqueue.c index d951daa..042d221 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2982,7 +2982,7 @@ bool cancel_delayed_work(struct delayed_work *dwork) set_work_cpu_and_clear_pending(&dwork->work, work_cpu(&dwork->work)); local_irq_restore(flags); - return true; + return ret; } EXPORT_SYMBOL(cancel_delayed_work); -- cgit v0.10.2 From 844ab6f993b1d32eb40512503d35ff6ad0c57030 Mon Sep 17 00:00:00 2001 From: Jacob Shin Date: Wed, 24 Oct 2012 14:24:44 -0500 Subject: x86, mm: Find_early_table_space based on ranges that are actually being mapped Current logic finds enough space for direct mapping page tables from 0 to end. Instead, we only need to find enough space to cover mr[0].start to mr[nr_range].end -- the range that is actually being mapped by init_memory_mapping() This is needed after 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a, to address the panic reported here: https://lkml.org/lkml/2012/10/20/160 https://lkml.org/lkml/2012/10/21/157 Signed-off-by: Jacob Shin Link: http://lkml.kernel.org/r/20121024195311.GB11779@jshin-Toonie Tested-by: Tom Rini Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 8653b3a..bc287d6 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -29,36 +29,54 @@ int direct_gbpages #endif ; -static void __init find_early_table_space(unsigned long end, int use_pse, - int use_gbpages) +struct map_range { + unsigned long start; + unsigned long end; + unsigned page_size_mask; +}; + +/* + * First calculate space needed for kernel direct mapping page tables to cover + * mr[0].start to mr[nr_range - 1].end, while accounting for possible 2M and 1GB + * pages. Then find enough contiguous space for those page tables. + */ +static void __init find_early_table_space(struct map_range *mr, int nr_range) { - unsigned long puds, pmds, ptes, tables, start = 0, good_end = end; + int i; + unsigned long puds = 0, pmds = 0, ptes = 0, tables; + unsigned long start = 0, good_end; phys_addr_t base; - puds = (end + PUD_SIZE - 1) >> PUD_SHIFT; - tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); + for (i = 0; i < nr_range; i++) { + unsigned long range, extra; - if (use_gbpages) { - unsigned long extra; + range = mr[i].end - mr[i].start; + puds += (range + PUD_SIZE - 1) >> PUD_SHIFT; - extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT); - pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT; - } else - pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT; - - tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE); + if (mr[i].page_size_mask & (1 << PG_LEVEL_1G)) { + extra = range - ((range >> PUD_SHIFT) << PUD_SHIFT); + pmds += (extra + PMD_SIZE - 1) >> PMD_SHIFT; + } else { + pmds += (range + PMD_SIZE - 1) >> PMD_SHIFT; + } - if (use_pse) { - unsigned long extra; - - extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT); + if (mr[i].page_size_mask & (1 << PG_LEVEL_2M)) { + extra = range - ((range >> PMD_SHIFT) << PMD_SHIFT); #ifdef CONFIG_X86_32 - extra += PMD_SIZE; + extra += PMD_SIZE; #endif - ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; - } else - ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT; + /* The first 2/4M doesn't use large pages. */ + if (mr[i].start < PMD_SIZE) + extra += range; + + ptes += (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; + } else { + ptes += (range + PAGE_SIZE - 1) >> PAGE_SHIFT; + } + } + tables = roundup(puds * sizeof(pud_t), PAGE_SIZE); + tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE); tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE); #ifdef CONFIG_X86_32 @@ -76,7 +94,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse, pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT); printk(KERN_DEBUG "kernel direct mapping tables up to %#lx @ [mem %#010lx-%#010lx]\n", - end - 1, pgt_buf_start << PAGE_SHIFT, + mr[nr_range - 1].end - 1, pgt_buf_start << PAGE_SHIFT, (pgt_buf_top << PAGE_SHIFT) - 1); } @@ -85,12 +103,6 @@ void __init native_pagetable_reserve(u64 start, u64 end) memblock_reserve(start, end - start); } -struct map_range { - unsigned long start; - unsigned long end; - unsigned page_size_mask; -}; - #ifdef CONFIG_X86_32 #define NR_RANGE_MR 3 #else /* CONFIG_X86_64 */ @@ -263,7 +275,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, * nodes are discovered. */ if (!after_bootmem) - find_early_table_space(end, use_pse, use_gbpages); + find_early_table_space(mr, nr_range); for (i = 0; i < nr_range; i++) ret = kernel_physical_mapping_init(mr[i].start, mr[i].end, -- cgit v0.10.2 From d7870af7e2e3a91b462075ec1ca669b482215187 Mon Sep 17 00:00:00 2001 From: Michael Shigorin Date: Mon, 22 Oct 2012 12:18:56 +0300 Subject: usb-storage: add unusual_devs entry for Casio EX-N1 digital camera This commit sets removable subclass for Casio EX-N1 digital camera. The patch has been tested within an ALT Linux kernel: http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7 See also https://bugzilla.kernel.org/show_bug.cgi?id=49221 Signed-off-by: Oleksandr Chumachenko Signed-off-by: Michael Shigorin Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 779cd95..d305a5a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1004,6 +1004,12 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, USB_SC_8070, USB_PR_CB, NULL, US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), +/* Submitted by Oleksandr Chumachenko */ +UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100, + "Casio", + "EX-N1 DigitalCamera", + USB_SC_8070, USB_PR_DEVICE, NULL, 0), + /* Submitted by Hartmut Wahl */ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, "Samsung", -- cgit v0.10.2 From e297da6e0e39b81d1abd156c5b60321b2097fb1b Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Wed, 24 Oct 2012 13:43:47 +0300 Subject: staging: ipack: add missing include (implicit declaration of function 'kfree') MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On ARCH=alpha make allmodconfig: linux-2.6/drivers/staging/ipack/bridges/tpci200.c: In function 'tpci200_free_irq': linux-2.6/drivers/staging/ipack/bridges/tpci200.c:188:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] linux-2.6/drivers/staging/ipack/bridges/tpci200.c: In function 'tpci200_request_irq': linux-2.6/drivers/staging/ipack/bridges/tpci200.c:215:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] Fixed by adding header CC: Greg Kroah-Hartman CC: Samuel Iglesias Gonsalvez CC: Jens Taprogge CC: "Miguel Gómez" CC: devel@driverdev.osuosl.org Signed-off-by: Sergei Trofimovich Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c index bb8aa70..46d6657 100644 --- a/drivers/staging/ipack/bridges/tpci200.c +++ b/drivers/staging/ipack/bridges/tpci200.c @@ -12,6 +12,7 @@ */ #include +#include #include "tpci200.h" static u16 tpci200_status_timeout[] = { -- cgit v0.10.2 From 1392550240aaa72ce3a094a38bd23525cd67ce60 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 12 Oct 2012 13:22:42 -0700 Subject: Drivers: hv: Cleanup error handling in vmbus_open() Fix a memory leak in the error handling path in the function vmbus_open(). Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reported-by: Jason Wang Cc: Stable Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 4065374..f4c3d28 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -146,14 +146,14 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, if (ret != 0) { err = ret; - goto errorout; + goto error0; } ret = hv_ringbuffer_init( &newchannel->inbound, in, recv_ringbuffer_size); if (ret != 0) { err = ret; - goto errorout; + goto error0; } @@ -168,7 +168,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, if (ret != 0) { err = ret; - goto errorout; + goto error0; } /* Create and init the channel open message */ @@ -177,7 +177,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, GFP_KERNEL); if (!open_info) { err = -ENOMEM; - goto errorout; + goto error0; } init_completion(&open_info->waitevent); @@ -193,7 +193,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, if (userdatalen > MAX_USER_DEFINED_BYTES) { err = -EINVAL; - goto errorout; + goto error0; } if (userdatalen) @@ -208,19 +208,18 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, sizeof(struct vmbus_channel_open_channel)); if (ret != 0) - goto cleanup; + goto error1; t = wait_for_completion_timeout(&open_info->waitevent, 5*HZ); if (t == 0) { err = -ETIMEDOUT; - goto errorout; + goto error1; } if (open_info->response.open_result.status) err = open_info->response.open_result.status; -cleanup: spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); list_del(&open_info->msglistentry); spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); @@ -228,9 +227,12 @@ cleanup: kfree(open_info); return err; -errorout: - hv_ringbuffer_cleanup(&newchannel->outbound); - hv_ringbuffer_cleanup(&newchannel->inbound); +error1: + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); + list_del(&open_info->msglistentry); + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); + +error0: free_pages((unsigned long)out, get_order(send_ringbuffer_size + recv_ringbuffer_size)); kfree(open_info); -- cgit v0.10.2 From c0d2af637863940b1a4fb208224ca7acb905c39f Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 18 Oct 2012 12:07:03 -0700 Subject: dynamic_debug: Remove unnecessary __used The __used attribute prevents gcc from eliminating unnecessary, otherwise optimized away, metadata for debugging logging messages. Remove the __used attribute. Signed-off-by: Joe Perches Acked-by: Jason Baron Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index c18257b..6dd4787 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -61,7 +61,7 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor, const char *fmt, ...); #define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \ - static struct _ddebug __used __aligned(8) \ + static struct _ddebug __aligned(8) \ __attribute__((section("__verbose"))) name = { \ .modname = KBUILD_MODNAME, \ .function = __func__, \ -- cgit v0.10.2 From 66081a72517a131430dcf986775f3268aafcb546 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 29 Sep 2012 22:23:19 +0200 Subject: sysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat() The warning check for duplicate sysfs entries can cause a buffer overflow when printing the warning, as strcat() doesn't check buffer sizes. Use strlcat() instead. Since strlcat() doesn't return a pointer to the passed buffer, unlike strcat(), I had to convert the nested concatenation in sysfs_add_one() to an admittedly more obscure comma operator construct, to avoid emitting code for the concatenation if CONFIG_BUG is disabled. Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 6b0bb00..2fbdff6 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -485,20 +485,18 @@ int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) /** * sysfs_pathname - return full path to sysfs dirent * @sd: sysfs_dirent whose path we want - * @path: caller allocated buffer + * @path: caller allocated buffer of size PATH_MAX * * Gives the name "/" to the sysfs_root entry; any path returned * is relative to wherever sysfs is mounted. - * - * XXX: does no error checking on @path size */ static char *sysfs_pathname(struct sysfs_dirent *sd, char *path) { if (sd->s_parent) { sysfs_pathname(sd->s_parent, path); - strcat(path, "/"); + strlcat(path, "/", PATH_MAX); } - strcat(path, sd->s_name); + strlcat(path, sd->s_name, PATH_MAX); return path; } @@ -531,9 +529,11 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) char *path = kzalloc(PATH_MAX, GFP_KERNEL); WARN(1, KERN_WARNING "sysfs: cannot create duplicate filename '%s'\n", - (path == NULL) ? sd->s_name : - strcat(strcat(sysfs_pathname(acxt->parent_sd, path), "/"), - sd->s_name)); + (path == NULL) ? sd->s_name + : (sysfs_pathname(acxt->parent_sd, path), + strlcat(path, "/", PATH_MAX), + strlcat(path, sd->s_name, PATH_MAX), + path)); kfree(path); } -- cgit v0.10.2 From 9bd952615a42d7e2ce3fa2c632e808e804637a1a Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 24 Oct 2012 16:12:58 -0700 Subject: libceph: avoid NULL kref_put when osd reset races with alloc_msg The ceph_on_in_msg_alloc() method drops con->mutex while it allocates a message. If that races with a timeout that resends a zillion messages and resets the connection, and the ->alloc_msg() method returns a NULL message, it will call ceph_msg_put(NULL) and BUG. Fix by only calling put if msg is non-NULL. Fixes http://tracker.newdream.net/issues/3142 Signed-off-by: Sage Weil diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index cad0d17..3ef1759 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -2750,7 +2750,8 @@ static int ceph_con_in_msg_alloc(struct ceph_connection *con, int *skip) msg = con->ops->alloc_msg(con, hdr, skip); mutex_lock(&con->mutex); if (con->state != CON_STATE_OPEN) { - ceph_msg_put(msg); + if (msg) + ceph_msg_put(msg); return -EAGAIN; } con->in_msg = msg; -- cgit v0.10.2 From b8cac0bbed33065ac42b3791efefec5dc233f7c1 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:15 -0500 Subject: staging: tidspbridge: request the right irq for mmu Requested irq for mmu is currently conflicting with a DMA irq due to recent changes to irq header files, now the offset for the start of the interrupt controller numbering has changed. This should be removed during a future migration to omap-iommu, for now it is hardcoded. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h index ed00d3d..5e2f4d8 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h +++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h @@ -47,8 +47,8 @@ #include #include -/* TODO -- Remove, once BP defines them */ -#define INT_DSP_MMU_IRQ 28 +/* TODO -- Remove, once omap-iommu is used */ +#define INT_DSP_MMU_IRQ (28 + NR_IRQS) #define PRCM_VDD1 1 -- cgit v0.10.2 From 53e3e3f19f3a0c4c38e28eb4af7acfee325db375 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:16 -0500 Subject: staging: tidspbridge: drop const from custom mmu implementation Custom mmu functions receive a 'const void __iomem *', all the callers pass a 'void __iomem *', so drop the const to fix the warnings like: warning: passing argument 2 of '__raw_writel' discards qualifiers from pointer target type ../io.h:88: note: expected 'volatile void *' but argument is of type 'const void *' Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c index 71cb822..a159450 100644 --- a/drivers/staging/tidspbridge/hw/hw_mmu.c +++ b/drivers/staging/tidspbridge/hw/hw_mmu.c @@ -78,7 +78,7 @@ static hw_status mmu_flush_entry(const void __iomem *base_address); * INPUTS: * * Identifier : base_address - * TypE : const u32 + * Type : void __iomem * * Description : Base Address of instance of MMU module * * Identifier : page_sz @@ -112,7 +112,7 @@ static hw_status mmu_flush_entry(const void __iomem *base_address); * * METHOD: : Check the Input parameters and set the CAM entry. */ -static hw_status mmu_set_cam_entry(const void __iomem *base_address, +static hw_status mmu_set_cam_entry(void __iomem *base_address, const u32 page_sz, const u32 preserved_bit, const u32 valid_bit, @@ -124,7 +124,7 @@ static hw_status mmu_set_cam_entry(const void __iomem *base_address, * INPUTS: * * Identifier : base_address - * Type : const u32 + * Type : void __iomem * * Description : Base Address of instance of MMU module * * Identifier : physical_addr @@ -157,7 +157,7 @@ static hw_status mmu_set_cam_entry(const void __iomem *base_address, * * METHOD: : Check the Input parameters and set the RAM entry. */ -static hw_status mmu_set_ram_entry(const void __iomem *base_address, +static hw_status mmu_set_ram_entry(void __iomem *base_address, const u32 physical_addr, enum hw_endianism_t endianism, enum hw_element_size_t element_size, @@ -165,7 +165,7 @@ static hw_status mmu_set_ram_entry(const void __iomem *base_address, /* HW FUNCTIONS */ -hw_status hw_mmu_enable(const void __iomem *base_address) +hw_status hw_mmu_enable(void __iomem *base_address) { hw_status status = 0; @@ -174,7 +174,7 @@ hw_status hw_mmu_enable(const void __iomem *base_address) return status; } -hw_status hw_mmu_disable(const void __iomem *base_address) +hw_status hw_mmu_disable(void __iomem *base_address) { hw_status status = 0; @@ -183,7 +183,7 @@ hw_status hw_mmu_disable(const void __iomem *base_address) return status; } -hw_status hw_mmu_num_locked_set(const void __iomem *base_address, +hw_status hw_mmu_num_locked_set(void __iomem *base_address, u32 num_locked_entries) { hw_status status = 0; @@ -193,7 +193,7 @@ hw_status hw_mmu_num_locked_set(const void __iomem *base_address, return status; } -hw_status hw_mmu_victim_num_set(const void __iomem *base_address, +hw_status hw_mmu_victim_num_set(void __iomem *base_address, u32 victim_entry_num) { hw_status status = 0; @@ -203,7 +203,7 @@ hw_status hw_mmu_victim_num_set(const void __iomem *base_address, return status; } -hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask) +hw_status hw_mmu_event_ack(void __iomem *base_address, u32 irq_mask) { hw_status status = 0; @@ -212,7 +212,7 @@ hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask) return status; } -hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask) +hw_status hw_mmu_event_disable(void __iomem *base_address, u32 irq_mask) { hw_status status = 0; u32 irq_reg; @@ -224,7 +224,7 @@ hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask) return status; } -hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask) +hw_status hw_mmu_event_enable(void __iomem *base_address, u32 irq_mask) { hw_status status = 0; u32 irq_reg; @@ -236,7 +236,7 @@ hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask) return status; } -hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask) +hw_status hw_mmu_event_status(void __iomem *base_address, u32 *irq_mask) { hw_status status = 0; @@ -245,7 +245,7 @@ hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask) return status; } -hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr) +hw_status hw_mmu_fault_addr_read(void __iomem *base_address, u32 *addr) { hw_status status = 0; @@ -255,7 +255,7 @@ hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr) return status; } -hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr) +hw_status hw_mmu_ttb_set(void __iomem *base_address, u32 ttb_phys_addr) { hw_status status = 0; u32 load_ttb; @@ -267,7 +267,7 @@ hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr) return status; } -hw_status hw_mmu_twl_enable(const void __iomem *base_address) +hw_status hw_mmu_twl_enable(void __iomem *base_address) { hw_status status = 0; @@ -276,7 +276,7 @@ hw_status hw_mmu_twl_enable(const void __iomem *base_address) return status; } -hw_status hw_mmu_twl_disable(const void __iomem *base_address) +hw_status hw_mmu_twl_disable(void __iomem *base_address) { hw_status status = 0; @@ -323,7 +323,7 @@ hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr, return status; } -hw_status hw_mmu_tlb_add(const void __iomem *base_address, +hw_status hw_mmu_tlb_add(void __iomem *base_address, u32 physical_addr, u32 virtual_addr, u32 page_sz, @@ -516,7 +516,7 @@ static hw_status mmu_flush_entry(const void __iomem *base_address) } /* mmu_set_cam_entry */ -static hw_status mmu_set_cam_entry(const void __iomem *base_address, +static hw_status mmu_set_cam_entry(void __iomem *base_address, const u32 page_sz, const u32 preserved_bit, const u32 valid_bit, @@ -536,7 +536,7 @@ static hw_status mmu_set_cam_entry(const void __iomem *base_address, } /* mmu_set_ram_entry */ -static hw_status mmu_set_ram_entry(const void __iomem *base_address, +static hw_status mmu_set_ram_entry(void __iomem *base_address, const u32 physical_addr, enum hw_endianism_t endianism, enum hw_element_size_t element_size, @@ -556,7 +556,7 @@ static hw_status mmu_set_ram_entry(const void __iomem *base_address, } -void hw_mmu_tlb_flush_all(const void __iomem *base) +void hw_mmu_tlb_flush_all(void __iomem *base) { __raw_writel(1, base + MMU_GFLUSH); } diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h index 1458a2c..1cdd082 100644 --- a/drivers/staging/tidspbridge/hw/hw_mmu.h +++ b/drivers/staging/tidspbridge/hw/hw_mmu.h @@ -42,44 +42,44 @@ struct hw_mmu_map_attrs_t { bool donotlockmpupage; }; -extern hw_status hw_mmu_enable(const void __iomem *base_address); +extern hw_status hw_mmu_enable(void __iomem *base_address); -extern hw_status hw_mmu_disable(const void __iomem *base_address); +extern hw_status hw_mmu_disable(void __iomem *base_address); -extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address, +extern hw_status hw_mmu_num_locked_set(void __iomem *base_address, u32 num_locked_entries); -extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address, +extern hw_status hw_mmu_victim_num_set(void __iomem *base_address, u32 victim_entry_num); /* For MMU faults */ -extern hw_status hw_mmu_event_ack(const void __iomem *base_address, +extern hw_status hw_mmu_event_ack(void __iomem *base_address, u32 irq_mask); -extern hw_status hw_mmu_event_disable(const void __iomem *base_address, +extern hw_status hw_mmu_event_disable(void __iomem *base_address, u32 irq_mask); -extern hw_status hw_mmu_event_enable(const void __iomem *base_address, +extern hw_status hw_mmu_event_enable(void __iomem *base_address, u32 irq_mask); -extern hw_status hw_mmu_event_status(const void __iomem *base_address, +extern hw_status hw_mmu_event_status(void __iomem *base_address, u32 *irq_mask); -extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, +extern hw_status hw_mmu_fault_addr_read(void __iomem *base_address, u32 *addr); /* Set the TT base address */ -extern hw_status hw_mmu_ttb_set(const void __iomem *base_address, +extern hw_status hw_mmu_ttb_set(void __iomem *base_address, u32 ttb_phys_addr); -extern hw_status hw_mmu_twl_enable(const void __iomem *base_address); +extern hw_status hw_mmu_twl_enable(void __iomem *base_address); -extern hw_status hw_mmu_twl_disable(const void __iomem *base_address); +extern hw_status hw_mmu_twl_disable(void __iomem *base_address); extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr, u32 page_sz); -extern hw_status hw_mmu_tlb_add(const void __iomem *base_address, +extern hw_status hw_mmu_tlb_add(void __iomem *base_address, u32 physical_addr, u32 virtual_addr, u32 page_sz, @@ -97,7 +97,7 @@ extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va, extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size); -void hw_mmu_tlb_flush_all(const void __iomem *base); +void hw_mmu_tlb_flush_all(void __iomem *base); static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va) { -- cgit v0.10.2 From 3c8676967bce1c9b8723129625a2125b7704674f Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:17 -0500 Subject: staging: tidspbridge: change type to __iomem for per and core addresses Currently per_pm_base and core_pm_base are declared as u32, however _raw_* changed the data type, since: 195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors This should fix warnings for per and core accesses: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast ../io.h:88: note: expected 'volatile void *' but argument is of type 'u32' Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h index 60a2781..b32c756 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h +++ b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h @@ -53,8 +53,8 @@ struct cfg_hostres { u32 chnl_buf_size; u32 num_chnls; void __iomem *per_base; - u32 per_pm_base; - u32 core_pm_base; + void __iomem *per_pm_base; + void __iomem *core_pm_base; void __iomem *dmmu_base; }; diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c index 6795205..db1da28 100644 --- a/drivers/staging/tidspbridge/rmgr/drv.c +++ b/drivers/staging/tidspbridge/rmgr/drv.c @@ -667,10 +667,10 @@ int drv_request_bridge_res_dsp(void **phost_resources) OMAP_DSP_MEM3_SIZE); host_res->per_base = ioremap(OMAP_PER_CM_BASE, OMAP_PER_CM_SIZE); - host_res->per_pm_base = (u32) ioremap(OMAP_PER_PRM_BASE, - OMAP_PER_PRM_SIZE); - host_res->core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE, - OMAP_CORE_PRM_SIZE); + host_res->per_pm_base = ioremap(OMAP_PER_PRM_BASE, + OMAP_PER_PRM_SIZE); + host_res->core_pm_base = ioremap(OMAP_CORE_PRM_BASE, + OMAP_CORE_PRM_SIZE); host_res->dmmu_base = ioremap(OMAP_DMMU_BASE, OMAP_DMMU_SIZE); -- cgit v0.10.2 From 7de8a0cf48a023058642c69145630d51709aa174 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:18 -0500 Subject: staging: tidspbridge: ioremap dsp sync addr Change the type of sync_addr to 'void __iomem *' and ioremap the physical address in the shared memory so we can access it using _raw_*. While at it, drop 'dw_' prefix. Fix the warning associated with dsp's sync_addr: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast ../io.h:88: note: expected 'volatile void *' but argument is of type 'u32' Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index 066a3ce..f619fb3 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -126,7 +126,8 @@ static int mem_map_vmalloc(struct bridge_dev_context *dev_context, u32 ul_num_bytes, struct hw_mmu_map_attrs_t *hw_attrs); -bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr); +bool wait_for_start(struct bridge_dev_context *dev_context, + void __iomem *sync_addr); /* ----------------------------------- Globals */ @@ -363,10 +364,11 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, { int status = 0; struct bridge_dev_context *dev_context = dev_ctxt; - u32 dw_sync_addr = 0; + void __iomem *sync_addr; u32 ul_shm_base; /* Gpp Phys SM base addr(byte) */ u32 ul_shm_base_virt; /* Dsp Virt SM base addr */ u32 ul_tlb_base_virt; /* Base of MMU TLB entry */ + u32 shm_sync_pa; /* Offset of shm_base_virt from tlb_base_virt */ u32 ul_shm_offset_virt; s32 entry_ndx; @@ -397,15 +399,22 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Kernel logical address */ ul_shm_base = dev_context->atlb_entry[0].gpp_va + ul_shm_offset_virt; + /* SHM physical sync address */ + shm_sync_pa = dev_context->atlb_entry[0].gpp_pa + ul_shm_offset_virt + + SHMSYNCOFFSET; + /* 2nd wd is used as sync field */ - dw_sync_addr = ul_shm_base + SHMSYNCOFFSET; + sync_addr = ioremap(shm_sync_pa, SZ_32); + if (!sync_addr) + return -ENOMEM; + /* Write a signature into the shm base + offset; this will * get cleared when the DSP program starts. */ if ((ul_shm_base_virt == 0) || (ul_shm_base == 0)) { pr_err("%s: Illegal SM base\n", __func__); status = -EPERM; } else - __raw_writel(0xffffffff, dw_sync_addr); + __raw_writel(0xffffffff, sync_addr); if (!status) { resources = dev_context->resources; @@ -419,8 +428,10 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, * function is made available. */ void __iomem *ctrl = ioremap(0x48002000, SZ_4K); - if (!ctrl) + if (!ctrl) { + iounmap(sync_addr); return -ENOMEM; + } (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, @@ -588,15 +599,15 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); - dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", dw_sync_addr); + dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", *(u32 *)sync_addr); dev_dbg(bridge, "DSP c_int00 Address = 0x%x\n", dsp_addr); if (dsp_debug) - while (__raw_readw(dw_sync_addr)) + while (__raw_readw(sync_addr)) ; /* Wait for DSP to clear word in shared memory */ /* Read the Location */ - if (!wait_for_start(dev_context, dw_sync_addr)) + if (!wait_for_start(dev_context, sync_addr)) status = -ETIMEDOUT; dev_get_symbol(dev_context->dev_obj, "_WDT_enable", &wdt_en); @@ -612,7 +623,7 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Write the synchronization bit to indicate the * completion of OPP table update to DSP */ - __raw_writel(0XCAFECAFE, dw_sync_addr); + __raw_writel(0XCAFECAFE, sync_addr); /* update board state */ dev_context->brd_state = BRD_RUNNING; @@ -621,6 +632,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, dev_context->brd_state = BRD_UNKNOWN; } } + + iounmap(sync_addr); + return status; } @@ -1796,12 +1810,13 @@ static int mem_map_vmalloc(struct bridge_dev_context *dev_context, * ======== wait_for_start ======== * Wait for the singal from DSP that it has started, or time out. */ -bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr) +bool wait_for_start(struct bridge_dev_context *dev_context, + void __iomem *sync_addr) { u16 timeout = TIHELEN_ACKTIMEOUT; /* Wait for response from board */ - while (__raw_readw(dw_sync_addr) && --timeout) + while (__raw_readw(sync_addr) && --timeout) udelay(10); /* If timed out: return false */ -- cgit v0.10.2 From 5ae4fd94a3b2d2b285cff294a5a23c52e21db208 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:19 -0500 Subject: staging: tidspbridge: ioremap physical address of the stack segment in shm Due to data type change, readl can no longer receive a u32. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c index c2fc613..294e9b4 100644 --- a/drivers/staging/tidspbridge/rmgr/node.c +++ b/drivers/staging/tidspbridge/rmgr/node.c @@ -304,8 +304,7 @@ int node_allocate(struct proc_object *hprocessor, u32 pul_value; u32 dynext_base; u32 off_set = 0; - u32 ul_stack_seg_addr, ul_stack_seg_val; - u32 ul_gpp_mem_base; + u32 ul_stack_seg_val; struct cfg_hostres *host_res; struct bridge_dev_context *pbridge_context; u32 mapped_addr = 0; @@ -581,6 +580,9 @@ func_cont: if (strcmp((char *) pnode->dcd_props.obj_data.node_obj.ndb_props. stack_seg_name, STACKSEGLABEL) == 0) { + void __iomem *stack_seg; + u32 stack_seg_pa; + status = hnode_mgr->nldr_fxns. get_fxn_addr(pnode->nldr_node_obj, "DYNEXT_BEG", @@ -608,14 +610,21 @@ func_cont: goto func_end; } - ul_gpp_mem_base = (u32) host_res->mem_base[1]; off_set = pul_value - dynext_base; - ul_stack_seg_addr = ul_gpp_mem_base + off_set; - ul_stack_seg_val = readl(ul_stack_seg_addr); + stack_seg_pa = host_res->mem_phys[1] + off_set; + stack_seg = ioremap(stack_seg_pa, SZ_32); + if (!stack_seg) { + status = -ENOMEM; + goto func_end; + } + + ul_stack_seg_val = readl(stack_seg); + + iounmap(stack_seg); dev_dbg(bridge, "%s: StackSegVal = 0x%x, StackSegAddr =" " 0x%x\n", __func__, ul_stack_seg_val, - ul_stack_seg_addr); + host_res->mem_base[1] + off_set); pnode->create_args.asa.task_arg_obj.stack_seg = ul_stack_seg_val; -- cgit v0.10.2 From 4d3f120ae7473b96f114b187856e89e08571fc83 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Oct 2012 17:09:20 -0500 Subject: staging: tidspbridge: delete unused mmu functions This should get rid of warnings of the type: warning: passing argument 1 of '' discards qualifiers from pointer target type note: expected 'void *' but argument is of type 'const void *' Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c index a159450..50244a4 100644 --- a/drivers/staging/tidspbridge/hw/hw_mmu.c +++ b/drivers/staging/tidspbridge/hw/hw_mmu.c @@ -48,31 +48,6 @@ enum hw_mmu_page_size_t { }; /* - * FUNCTION : mmu_flush_entry - * - * INPUTS: - * - * Identifier : base_address - * Type : const u32 - * Description : Base Address of instance of MMU module - * - * RETURNS: - * - * Type : hw_status - * Description : 0 -- No errors occurred - * RET_BAD_NULL_PARAM -- A Pointer - * Parameter was set to NULL - * - * PURPOSE: : Flush the TLB entry pointed by the - * lock counter register - * even if this entry is set protected - * - * METHOD: : Check the Input parameter and Flush a - * single entry in the TLB. - */ -static hw_status mmu_flush_entry(const void __iomem *base_address); - -/* * FUNCTION : mmu_set_cam_entry * * INPUTS: @@ -285,44 +260,6 @@ hw_status hw_mmu_twl_disable(void __iomem *base_address) return status; } -hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr, - u32 page_sz) -{ - hw_status status = 0; - u32 virtual_addr_tag; - enum hw_mmu_page_size_t pg_size_bits; - - switch (page_sz) { - case HW_PAGE_SIZE4KB: - pg_size_bits = HW_MMU_SMALL_PAGE; - break; - - case HW_PAGE_SIZE64KB: - pg_size_bits = HW_MMU_LARGE_PAGE; - break; - - case HW_PAGE_SIZE1MB: - pg_size_bits = HW_MMU_SECTION; - break; - - case HW_PAGE_SIZE16MB: - pg_size_bits = HW_MMU_SUPERSECTION; - break; - - default: - return -EINVAL; - } - - /* Generate the 20-bit tag from virtual address */ - virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12); - - mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag); - - mmu_flush_entry(base_address); - - return status; -} - hw_status hw_mmu_tlb_add(void __iomem *base_address, u32 physical_addr, u32 virtual_addr, @@ -503,18 +440,6 @@ hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size) return status; } -/* mmu_flush_entry */ -static hw_status mmu_flush_entry(const void __iomem *base_address) -{ - hw_status status = 0; - u32 flush_entry_data = 0x1; - - /* write values to register */ - MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data); - - return status; -} - /* mmu_set_cam_entry */ static hw_status mmu_set_cam_entry(void __iomem *base_address, const u32 page_sz, diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h index 1cdd082..1c50bb3 100644 --- a/drivers/staging/tidspbridge/hw/hw_mmu.h +++ b/drivers/staging/tidspbridge/hw/hw_mmu.h @@ -76,9 +76,6 @@ extern hw_status hw_mmu_twl_enable(void __iomem *base_address); extern hw_status hw_mmu_twl_disable(void __iomem *base_address); -extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address, - u32 virtual_addr, u32 page_sz); - extern hw_status hw_mmu_tlb_add(void __iomem *base_address, u32 physical_addr, u32 virtual_addr, -- cgit v0.10.2 From a2fc66ce9f4669daeebc03d6891917b894c752a8 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Tue, 23 Oct 2012 04:54:34 +0000 Subject: pch_gbe: fix error handling in pch_gbe_up() If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index a8854d0..4c4fe5b 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1930,12 +1930,12 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) struct net_device *netdev = adapter->netdev; struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring; struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; - int err; + int err = -EINVAL; /* Ensure we have a valid MAC */ if (!is_valid_ether_addr(adapter->hw.mac.addr)) { pr_err("Error: Invalid MAC address\n"); - return -EINVAL; + goto out; } /* hardware has been reset, we need to reload some things */ @@ -1948,13 +1948,13 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) err = pch_gbe_request_irq(adapter); if (err) { - pr_err("Error: can't bring device up\n"); - return err; + pr_err("Error: can't bring device up - irq request failed\n"); + goto out; } err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count); if (err) { - pr_err("Error: can't bring device up\n"); - return err; + pr_err("Error: can't bring device up - alloc rx buffers pool failed\n"); + goto freeirq; } pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); @@ -1969,6 +1969,11 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) netif_start_queue(adapter->netdev); return 0; + +freeirq: + pch_gbe_free_irq(adapter); +out: + return err; } /** -- cgit v0.10.2 From b2b3392cfc0f5af0f621b3d95aba459f2d5c0e28 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 23 Oct 2012 12:11:55 +0000 Subject: NET_VENDOR_TI: make available for am33xx as well The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI visible for it as well. Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index b26cbda..2c41894 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_TI bool "Texas Instruments (TI) devices" default y - depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3)) + depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX)) ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from -- cgit v0.10.2 From 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Wed, 24 Oct 2012 14:01:18 +0800 Subject: ipv6: Set default hoplimit as zero. Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the hoplimit checking condition and default value in ip6_dst_hoplimit, not zeros all hoplimit default value. Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as const, cause as a37e6e344910(net: force dst_default_metrics to const section) Signed-off-by: Li RongQing Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7c7e963..b1e6cf0 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -219,7 +219,7 @@ static struct dst_ops ip6_dst_blackhole_ops = { }; static const u32 ip6_template_metrics[RTAX_MAX] = { - [RTAX_HOPLIMIT - 1] = 255, + [RTAX_HOPLIMIT - 1] = 0, }; static const struct rt6_info ip6_null_entry_template = { @@ -1232,7 +1232,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, rt->rt6i_dst.addr = fl6->daddr; rt->rt6i_dst.plen = 128; rt->rt6i_idev = idev; - dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255); + dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 0); spin_lock_bh(&icmp6_dst_lock); rt->dst.next = icmp6_dst_gc_list; -- cgit v0.10.2 From 2b9c128e9580e79db48bd3aacb2b4873544e01e8 Mon Sep 17 00:00:00 2001 From: Wei Yang Date: Wed, 24 Oct 2012 05:21:36 +0000 Subject: gianfar_ptp: use iomem, not ioports resource tree in probe When using a 36 bit dtb file, the driver complains "resource busy". Investigating the source of the message leads one to the gianfar_ptp_probe function. Since the type of the device resource requested in this function is IORESOURCE_MEM, it should use "iomem_resource" instead of "ioports_resource". Signed-off-by: Wei Yang Cc: Claudiu Manoil Cc: Timur Tabi Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index b9db0e0..2e5daee 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -478,7 +478,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) pr_err("no resource\n"); goto no_resource; } - if (request_resource(&ioport_resource, etsects->rsrc)) { + if (request_resource(&iomem_resource, etsects->rsrc)) { pr_err("resource busy\n"); goto no_resource; } -- cgit v0.10.2 From 910a578f7e9400a78a3b13aba0b4d2df16a2cb05 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 24 Oct 2012 20:37:51 +0200 Subject: vhost: fix mergeable bufs on BE hosts We copy head count to a 16 bit field, this works by chance on LE but on BE guest gets 0. Fix it up. Signed-off-by: Michael S. Tsirkin Tested-by: Alexander Graf Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 072cbba..7f93f34 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -379,7 +379,8 @@ static void handle_rx(struct vhost_net *net) .hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE }; size_t total_len = 0; - int err, headcount, mergeable; + int err, mergeable; + s16 headcount; size_t vhost_hlen, sock_hlen; size_t vhost_len, sock_len; /* TODO: check that we are running from vhost_worker? */ -- cgit v0.10.2 From ae495e844a77344fdaedbb2ad97d925d096e9f0d Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Thu, 25 Oct 2012 00:38:01 -0700 Subject: Input: egalax_ts - get gpio from devicetree The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing Reviewed-by: Shawn Guo Signed-off-by: Hui Wang Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt new file mode 100644 index 0000000..df70318 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -0,0 +1,19 @@ +* EETI eGalax Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,egalax_ts" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- wakeup-gpios: the gpio pin to be used for waking up the controller + as well as uased as irq pin + +Example: + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1ba232c..f7668b2 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index c1e3460..13fa62f 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); + struct device_node *np = client->dev.of_node; + int gpio; int ret; + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "wakeup-gpios", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; + ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { dev_err(&client->dev, @@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + error = egalax_wake_up_device(client); + if (error) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) { @@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); +static struct of_device_id egalax_ts_dt_ids[] = { + { .compatible = "eeti,egalax_ts" }, + { /* sentinel */ } +}; + static struct i2c_driver egalax_ts_driver = { .driver = { .name = "egalax_ts", .owner = THIS_MODULE, .pm = &egalax_ts_pm_ops, + .of_match_table = of_match_ptr(egalax_ts_dt_ids), }, .id_table = egalax_ts_id, .probe = egalax_ts_probe, -- cgit v0.10.2 From 88fd449e734a4264347e12b8ff74ccb33a9b9a35 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Wed, 24 Oct 2012 23:53:02 -0700 Subject: Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c3468c8..c30d4c9 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1449,6 +1449,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; -- cgit v0.10.2 From 1ae325574ce4c5fe5792b33cef95793e01af6c46 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 23 Oct 2012 15:55:05 +0100 Subject: ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes the build error below: arch/arm/mach-ux500/cpu.c: In function ‘ux500_init_irq’: arch/arm/mach-ux500/cpu.c:55:2: error: invalid use of undefined type ‘struct irq_chip’ arch/arm/mach-ux500/cpu.c:55:24: error: ‘IRQCHIP_SKIP_SET_WAKE’ undeclared (first use in this function) arch/arm/mach-ux500/cpu.c:55:24: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-ux500/cpu.c:55:48: error: ‘IRQCHIP_MASK_ON_SUSPEND’ undeclared (first use in this function) Acked-by: Linus Walleij Signed-off-by: Lee Jones diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd..1f3fbc2 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 35b33d230f7a621abf4d77b635d13061f08fd7a5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 24 Oct 2012 11:07:02 +0100 Subject: ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij Signed-off-by: Lee Jones diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7a..28dccd6 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; -- cgit v0.10.2 From 76ff4e434734f7772d1a592cc9fe1d9921a3ec40 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 24 Oct 2012 11:10:05 +0100 Subject: ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij Signed-off-by: Lee Jones diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 28dccd6..4b0e0ca 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -583,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; -- cgit v0.10.2 From 555cb715be8ef98b8ec362b23dfc254d432a35b1 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Wed, 24 Oct 2012 12:43:30 -0700 Subject: mac80211: Only process mesh config header on frames that RA_MATCH Doing otherwise is wrong, and may wreak havoc on the mpp tables, specially if the frame is encrypted. Cc: stable@vger.kernel.org Reported-by: Chaoxing Lin Signed-off-by: Javier Cardona Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 61c621e..1222127 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1897,7 +1897,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata)) return RX_DROP_MONITOR; - if (!ieee80211_is_data(hdr->frame_control)) + if (!ieee80211_is_data(hdr->frame_control) || + !(status->rx_flags & IEEE80211_RX_RA_MATCH)) return RX_CONTINUE; if (!mesh_hdr->ttl) @@ -1941,9 +1942,6 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) } skb_set_queue_mapping(skb, q); - if (!(status->rx_flags & IEEE80211_RX_RA_MATCH)) - goto out; - if (!--mesh_hdr->ttl) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl); return RX_DROP_MONITOR; -- cgit v0.10.2 From 2ac64cd17f9af6d6adaa921bd9846a3c9bb9235c Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Wed, 24 Oct 2012 12:43:31 -0700 Subject: mac80211: Don't drop frames received with mesh ttl == 1 Prior this fix, those frames were not received, nor forwarded. Fix this to receive and not forward. Signed-off-by: Javier Cardona Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1222127..f73e0dd 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1944,7 +1944,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (!--mesh_hdr->ttl) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl); - return RX_DROP_MONITOR; + goto out; } if (!ifmsh->mshcfg.dot11MeshForwarding) -- cgit v0.10.2 From b6442559952ccd931415923b4a5866f5c0e7e781 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 10 Oct 2012 18:27:09 +0800 Subject: ARM: dts: mxs: add the "clock-names" for gpmi-nand The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand. So the gpmi-nand driver could not find the proper clock. This patch fixes this issue. Signed-off-by: Huang Shijie Reviewed-by: Marek Vasut Acked-by: Shawn Guo Signed-off-by: Arnd Bergmann diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca7..6d31aa3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d631..55c57ea 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; -- cgit v0.10.2 From d323c243d9e6d9bab8b69ee44bfc2ebba11b9786 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 24 Oct 2012 11:00:29 -0700 Subject: MAINTAINERS: Add arm-soc tree entry Document the arm-soc tree in the maintainers file so that developers know how arm SoC development is structured. Signed-off-by: Stephen Boyd Signed-off-by: Arnd Bergmann diff --git a/MAINTAINERS b/MAINTAINERS index 027ec2b..56eac7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -637,6 +637,13 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/ +ARM SUB-ARCHITECTURES +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: MAINTAINED +F: arch/arm/mach-*/ +F: arch/arm/plat-*/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git + ARM PRIMECELL AACI PL041 DRIVER M: Russell King S: Maintained -- cgit v0.10.2 From 5e3059b2cb6fb412415da08b213549a6aed65d36 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 25 Oct 2012 16:34:18 +0200 Subject: ARM: SPEAr: Remove unused empty files Few empty files (spear1310_misc_regs.h and spear1340_misc_regs.h) are created by commit b31e23726 "SPEAr13xx: Add header files". Don't know how they got added, obviously my fault :) But nobody could even catch them in reviews. Remove them. Signed-off-by: Viresh Kumar Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29..0000000 diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29..0000000 -- cgit v0.10.2 From ef3f94412a4d7e107392e7c7cfc3e2d0668aa1aa Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 17 Oct 2012 20:16:48 +0200 Subject: ARM: socfpga: Fix socfpga compilation with early_printk() enabled This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: Pavel Machek Acked-by: Dinh Nguyen Acked-by: Jamie Iles Signed-off-by: Arnd Bergmann diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 0000000..8db01ee --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb..bc1f07c 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d2..966b2f9 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + -- cgit v0.10.2 From 50dde8686eec41bf3d7cbec7a6f76c073ab01903 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:28:59 +0200 Subject: USB: metro-usb: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the call to metrousb_clean (close) in shutdown was redundant. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 0b257dd..25cb97c 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -271,51 +271,27 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr return retval; } -static void metrousb_shutdown(struct usb_serial *serial) +static int metrousb_port_probe(struct usb_serial_port *port) { - int i = 0; + struct metrousb_private *metro_priv; - dev_dbg(&serial->dev->dev, "%s\n", __func__); + metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL); + if (!metro_priv) + return -ENOMEM; - /* Stop reading and writing on all ports. */ - for (i = 0; i < serial->num_ports; ++i) { - /* Close any open urbs. */ - metrousb_cleanup(serial->port[i]); + spin_lock_init(&metro_priv->lock); - /* Free memory. */ - kfree(usb_get_serial_port_data(serial->port[i])); - usb_set_serial_port_data(serial->port[i], NULL); + usb_set_serial_port_data(port, metro_priv); - dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n", - __func__, serial->port[i]->number); - } + return 0; } -static int metrousb_startup(struct usb_serial *serial) +static int metrousb_port_remove(struct usb_serial_port *port) { struct metrousb_private *metro_priv; - struct usb_serial_port *port; - int i = 0; - - dev_dbg(&serial->dev->dev, "%s\n", __func__); - /* Loop through the serial ports setting up the private structures. - * Currently we only use one port. */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - - /* Declare memory. */ - metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL); - if (!metro_priv) - return -ENOMEM; - - /* Initialize memory. */ - spin_lock_init(&metro_priv->lock); - usb_set_serial_port_data(port, metro_priv); - - dev_dbg(&serial->dev->dev, "%s - port number=%d\n ", - __func__, port->number); - } + metro_priv = usb_get_serial_port_data(port); + kfree(metro_priv); return 0; } @@ -414,8 +390,8 @@ static struct usb_serial_driver metrousb_device = { .close = metrousb_cleanup, .read_int_callback = metrousb_read_int_callback, .write_int_callback = metrousb_write_int_callback, - .attach = metrousb_startup, - .release = metrousb_shutdown, + .port_probe = metrousb_port_probe, + .port_remove = metrousb_port_remove, .throttle = metrousb_throttle, .unthrottle = metrousb_unthrottle, .tiocmget = metrousb_tiocmget, -- cgit v0.10.2 From 2ee44fbeac92c36e53779a57ee84cfee1affe418 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:00 +0200 Subject: USB: metro-usb: fix io after disconnect Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 25cb97c..6f29c74 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -179,16 +179,13 @@ static void metrousb_cleanup(struct usb_serial_port *port) { dev_dbg(&port->dev, "%s\n", __func__); - if (port->serial->dev) { - /* Shutdown any interrupt in urbs. */ - if (port->interrupt_in_urb) { - usb_unlink_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_in_urb); - } - - /* Send deactivate cmd to device */ + usb_unlink_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); - } + mutex_unlock(&port->serial->disc_mutex); } static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) -- cgit v0.10.2 From c129197c99550d356cf5f69b046994dd53cd1b9d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:01 +0200 Subject: USB: whiteheat: fix memory leak in error path Make sure command buffer is deallocated in case of errors during attach. Cc: Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 346c7ef..cfd155e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -333,6 +333,7 @@ no_firmware: "%s: please contact support@connecttech.com\n", serial->type->description); kfree(result); + kfree(command); return -ENODEV; no_command_private: -- cgit v0.10.2 From c467206ed6bcce26c83d0435612cc4fee2527305 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:02 +0200 Subject: USB: whiteheat: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the fifth port (command port) is never registered as a port device and thus should be handled in attach and release. Compile-only tested. Cc: Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cfd155e..b9fca35 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -83,6 +83,8 @@ static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static int whiteheat_port_remove(struct usb_serial_port *port); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); @@ -117,6 +119,8 @@ static struct usb_serial_driver whiteheat_device = { .num_ports = 4, .attach = whiteheat_attach, .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, .open = whiteheat_open, .close = whiteheat_close, .ioctl = whiteheat_ioctl, @@ -218,15 +222,12 @@ static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - struct usb_serial_port *port; - struct whiteheat_private *info; struct whiteheat_hw_info *hw_info; int pipe; int ret; int alen; __u8 *command; __u8 *result; - int i; command_port = serial->port[COMMAND_PORT]; @@ -285,22 +286,6 @@ static int whiteheat_attach(struct usb_serial *serial) serial->type->description, hw_info->sw_major_rev, hw_info->sw_minor_rev); - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - - info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); - if (info == NULL) { - dev_err(&port->dev, - "%s: Out of memory for port structures\n", - serial->type->description); - goto no_private; - } - - info->mcr = 0; - - usb_set_serial_port_data(port, info); - } - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { @@ -337,13 +322,6 @@ no_firmware: return -ENODEV; no_command_private: - for (i = serial->num_ports - 1; i >= 0; i--) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - kfree(info); -no_private: - ; - } kfree(result); no_result_buffer: kfree(command); @@ -351,21 +329,36 @@ no_command_buffer: return -ENOMEM; } - static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; - struct whiteheat_private *info; - int i; /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; kfree(usb_get_serial_port_data(command_port)); +} - for (i = 0; i < serial->num_ports; i++) { - info = usb_get_serial_port_data(serial->port[i]); - kfree(info); - } +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); + + return 0; +} + +static int whiteheat_port_remove(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = usb_get_serial_port_data(port); + kfree(info); + + return 0; } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) -- cgit v0.10.2 From 456c5be56ed070a4d883c60b587bcc1c97a8cf3e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:03 +0200 Subject: USB: ch341: fix port-data memory leak Fix port-data memory leak by moving port data allocation to port_probe and actually implementing deallocation. Note that this driver has never even bothered to try to deallocate it's port data... Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index e9c7046..d255f66 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -242,13 +242,11 @@ out: kfree(buffer); return r; } -/* allocate private data */ -static int ch341_attach(struct usb_serial *serial) +static int ch341_port_probe(struct usb_serial_port *port) { struct ch341_private *priv; int r; - /* private data */ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -258,17 +256,27 @@ static int ch341_attach(struct usb_serial *serial) priv->baud_rate = DEFAULT_BAUD_RATE; priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; - r = ch341_configure(serial->dev, priv); + r = ch341_configure(port->serial->dev, priv); if (r < 0) goto error; - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); return 0; error: kfree(priv); return r; } +static int ch341_port_remove(struct usb_serial_port *port) +{ + struct ch341_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + static int ch341_carrier_raised(struct usb_serial_port *port) { struct ch341_private *priv = usb_get_serial_port_data(port); @@ -304,7 +312,7 @@ static void ch341_close(struct usb_serial_port *port) static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); + struct ch341_private *priv = usb_get_serial_port_data(port); int r; priv->baud_rate = DEFAULT_BAUD_RATE; @@ -608,7 +616,8 @@ static struct usb_serial_driver ch341_device = { .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, .read_int_callback = ch341_read_int_callback, - .attach = ch341_attach, + .port_probe = ch341_port_probe, + .port_remove = ch341_port_remove, .reset_resume = ch341_reset_resume, }; -- cgit v0.10.2 From fb44ff854e148bc5c5982dad32da98b7a0989d2d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:04 +0200 Subject: USB: digi_acceleport: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the oob port is never registered as a port device and should thus be handled in attach and release. Compile-only tested. Cc: Peter Berger Cc: Al Borchers Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index c86f68c..b50fa1c 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -244,6 +244,8 @@ static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_disconnect(struct usb_serial *serial); static void digi_release(struct usb_serial *serial); +static int digi_port_probe(struct usb_serial_port *port); +static int digi_port_remove(struct usb_serial_port *port); static void digi_read_bulk_callback(struct urb *urb); static int digi_read_inb_callback(struct urb *urb); static int digi_read_oob_callback(struct urb *urb); @@ -294,6 +296,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .attach = digi_startup, .disconnect = digi_disconnect, .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, }; static struct usb_serial_driver digi_acceleport_4_device = { @@ -320,6 +324,8 @@ static struct usb_serial_driver digi_acceleport_4_device = { .attach = digi_startup, .disconnect = digi_disconnect, .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -1240,59 +1246,50 @@ static int digi_startup_device(struct usb_serial *serial) return ret; } - -static int digi_startup(struct usb_serial *serial) +static int digi_port_init(struct usb_serial_port *port, unsigned port_num) { - - int i; struct digi_port *priv; - struct digi_serial *serial_priv; - /* allocate the private data structures for all ports */ - /* number of regular ports + 1 for the out-of-band port */ - for (i = 0; i < serial->type->num_ports + 1; i++) { - /* allocate port private structure */ - priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL); - if (priv == NULL) { - while (--i >= 0) - kfree(usb_get_serial_port_data(serial->port[i])); - return 1; /* error */ - } + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - /* initialize port private structure */ - spin_lock_init(&priv->dp_port_lock); - priv->dp_port_num = i; - priv->dp_out_buf_len = 0; - priv->dp_write_urb_in_use = 0; - priv->dp_modem_signals = 0; - init_waitqueue_head(&priv->dp_modem_change_wait); - priv->dp_transmit_idle = 0; - init_waitqueue_head(&priv->dp_transmit_idle_wait); - priv->dp_throttled = 0; - priv->dp_throttle_restart = 0; - init_waitqueue_head(&priv->dp_flush_wait); - init_waitqueue_head(&priv->dp_close_wait); - INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); - priv->dp_port = serial->port[i]; - /* initialize write wait queue for this port */ - init_waitqueue_head(&serial->port[i]->write_wait); - - usb_set_serial_port_data(serial->port[i], priv); - } + spin_lock_init(&priv->dp_port_lock); + priv->dp_port_num = port_num; + init_waitqueue_head(&priv->dp_modem_change_wait); + init_waitqueue_head(&priv->dp_transmit_idle_wait); + init_waitqueue_head(&priv->dp_flush_wait); + init_waitqueue_head(&priv->dp_close_wait); + INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); + priv->dp_port = port; - /* allocate serial private structure */ - serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL); - if (serial_priv == NULL) { - for (i = 0; i < serial->type->num_ports + 1; i++) - kfree(usb_get_serial_port_data(serial->port[i])); - return 1; /* error */ - } + init_waitqueue_head(&port->write_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int digi_startup(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + int ret; + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; - /* initialize serial private structure */ spin_lock_init(&serial_priv->ds_serial_lock); serial_priv->ds_oob_port_num = serial->type->num_ports; serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; - serial_priv->ds_device_started = 0; + + ret = digi_port_init(serial_priv->ds_oob_port, + serial_priv->ds_oob_port_num); + if (ret) { + kfree(serial_priv); + return ret; + } + usb_set_serial_data(serial, serial_priv); return 0; @@ -1313,15 +1310,35 @@ static void digi_disconnect(struct usb_serial *serial) static void digi_release(struct usb_serial *serial) { - int i; + struct digi_serial *serial_priv; + struct digi_port *priv; + + serial_priv = usb_get_serial_data(serial); + + priv = usb_get_serial_port_data(serial_priv->ds_oob_port); + kfree(priv); - /* free the private data structures for all ports */ - /* number of regular ports + 1 for the out-of-band port */ - for (i = 0; i < serial->type->num_ports + 1; i++) - kfree(usb_get_serial_port_data(serial->port[i])); - kfree(usb_get_serial_data(serial)); + kfree(serial_priv); } +static int digi_port_probe(struct usb_serial_port *port) +{ + unsigned port_num; + + port_num = port->number - port->serial->minor; + + return digi_port_init(port, port_num); +} + +static int digi_port_remove(struct usb_serial_port *port) +{ + struct digi_port *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} static void digi_read_bulk_callback(struct urb *urb) { -- cgit v0.10.2 From 4230af572f95b3115bba1ee6fb95681f3851ab26 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:05 +0200 Subject: USB: mos7720: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this patch also fixes a second port-data memory leak in the error path of attach, should parallel-port initialisation fail. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 1bf1ad0..7526742 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1966,9 +1966,7 @@ static int mos7720_ioctl(struct tty_struct *tty, static int mos7720_startup(struct usb_serial *serial) { - struct moschip_port *mos7720_port; struct usb_device *dev; - int i; char data; u16 product; int ret_val; @@ -1999,29 +1997,6 @@ static int mos7720_startup(struct usb_serial *serial) serial->port[1]->interrupt_in_buffer = NULL; } - - /* set up serial port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7720_port == NULL) { - dev_err(&dev->dev, "%s - Out of memory\n", __func__); - return -ENOMEM; - } - - /* Initialize all port interrupt end point to port 0 int - * endpoint. Our device has only one interrupt endpoint - * common to all ports */ - serial->port[i]->interrupt_in_endpointAddress = - serial->port[0]->interrupt_in_endpointAddress; - - mos7720_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], mos7720_port); - - dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number); - dev_dbg(&dev->dev, "serial number is %d\n", serial->minor); - } - - /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); @@ -2049,8 +2024,6 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { - int i; - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2089,9 +2062,36 @@ static void mos7720_release(struct usb_serial *serial) kref_put(&mos_parport->ref_count, destroy_mos_parport); } #endif - /* free private structure allocated for serial port */ - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); +} + +static int mos7720_port_probe(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); + if (!mos7720_port) + return -ENOMEM; + + /* Initialize all port interrupt end point to port 0 int endpoint. + * Our device has only one interrupt endpoint common to all ports. + */ + port->interrupt_in_endpointAddress = + port->serial->port[0]->interrupt_in_endpointAddress; + mos7720_port->port = port; + + usb_set_serial_port_data(port, mos7720_port); + + return 0; +} + +static int mos7720_port_remove(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + kfree(mos7720_port); + + return 0; } static struct usb_serial_driver moschip7720_2port_driver = { @@ -2109,6 +2109,8 @@ static struct usb_serial_driver moschip7720_2port_driver = { .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, + .port_probe = mos7720_port_probe, + .port_remove = mos7720_port_remove, .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, -- cgit v0.10.2 From feffa7ca6008ab859dd7ab7448a5a899bf0aa98f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:06 +0200 Subject: USB: omninet: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6def58b..9ab73d2 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -44,8 +44,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); -static void omninet_release(struct usb_serial *serial); -static int omninet_attach(struct usb_serial *serial); +static int omninet_port_probe(struct usb_serial_port *port); +static int omninet_port_remove(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, @@ -62,7 +62,8 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, - .attach = omninet_attach, + .port_probe = omninet_port_probe, + .port_remove = omninet_port_remove, .open = omninet_open, .close = omninet_close, .write = omninet_write, @@ -70,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = { .read_bulk_callback = omninet_read_bulk_callback, .write_bulk_callback = omninet_write_bulk_callback, .disconnect = omninet_disconnect, - .release = omninet_release, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -112,18 +112,26 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; -static int omninet_attach(struct usb_serial *serial) +static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; - struct usb_serial_port *port = serial->port[0]; od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); - if (!od) { - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", - __func__, sizeof(struct omninet_data)); + if (!od) return -ENOMEM; - } + usb_set_serial_port_data(port, od); + + return 0; +} + +static int omninet_port_remove(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = usb_get_serial_port_data(port); + kfree(od); + return 0; } @@ -279,14 +287,6 @@ static void omninet_disconnect(struct usb_serial *serial) usb_kill_urb(wport->write_urb); } - -static void omninet_release(struct usb_serial *serial) -{ - struct usb_serial_port *port = serial->port[0]; - - kfree(usb_get_serial_port_data(port)); -} - module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); -- cgit v0.10.2 From b8a0055050b6294826171641b182c09f78f4cc63 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:07 +0200 Subject: USB: quatech2: fix memory leak in error path Fix memory leak in attach error path where the read urb was never freed. Cc: Bill Pemberton Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 2cdfdcc..5adb742 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -823,6 +823,7 @@ static int qt2_setup_urbs(struct usb_serial *serial) if (status != 0) { dev_err(&serial->dev->dev, "%s - submit read urb failed %i\n", __func__, status); + usb_free_urb(serial_priv->read_urb); return status; } -- cgit v0.10.2 From 40d04738491d7ac1aa708ba434ff3480ec9e1b96 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:08 +0200 Subject: USB: quatech2: fix port-data memory leaks Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this also fixes memory leaks in the error path of attach where the write urbs were not freed on errors. Make sure all interface-data deallocation is done in release by moving the read urb deallocation from disconnect. Note that the write urb is killed during close so that the call in disconnect was superfluous. Compile-only tested. Cc: Bill Pemberton Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 5adb742..8d0c4a0 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -143,12 +143,12 @@ static void qt2_read_bulk_callback(struct urb *urb); static void qt2_release(struct usb_serial *serial) { - int i; + struct qt2_serial_private *serial_priv; - kfree(usb_get_serial_data(serial)); + serial_priv = usb_get_serial_data(serial); - for (i = 0; i < serial->num_ports; i++) - kfree(usb_get_serial_port_data(serial->port[i])); + usb_free_urb(serial_priv->read_urb); + kfree(serial_priv); } static inline int calc_baud_divisor(int baudrate) @@ -464,21 +464,9 @@ static void qt2_close(struct usb_serial_port *port) static void qt2_disconnect(struct usb_serial *serial) { struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); - struct qt2_port_private *port_priv; - int i; if (serial_priv->read_urb->status == -EINPROGRESS) usb_kill_urb(serial_priv->read_urb); - - usb_free_urb(serial_priv->read_urb); - - for (i = 0; i < serial->num_ports; i++) { - port_priv = usb_get_serial_port_data(serial->port[i]); - - if (port_priv->write_urb->status == -EINPROGRESS) - usb_kill_urb(port_priv->write_urb); - usb_free_urb(port_priv->write_urb); - } } static int get_serial_info(struct usb_serial_port *port, @@ -773,11 +761,9 @@ static void qt2_read_bulk_callback(struct urb *urb) static int qt2_setup_urbs(struct usb_serial *serial) { - struct usb_serial_port *port; struct usb_serial_port *port0; struct qt2_serial_private *serial_priv; - struct qt2_port_private *port_priv; - int pcount, status; + int status; port0 = serial->port[0]; @@ -795,30 +781,6 @@ static int qt2_setup_urbs(struct usb_serial *serial) sizeof(serial_priv->read_buffer), qt2_read_bulk_callback, serial); - /* setup write_urb for each port */ - for (pcount = 0; pcount < serial->num_ports; pcount++) { - - port = serial->port[pcount]; - port_priv = usb_get_serial_port_data(port); - - port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port_priv->write_urb) { - dev_err(&serial->dev->dev, - "failed to alloc write_urb for port %i\n", - pcount); - return -ENOMEM; - } - - usb_fill_bulk_urb(port_priv->write_urb, - serial->dev, - usb_sndbulkpipe(serial->dev, - port0-> - bulk_out_endpointAddress), - port_priv->write_buffer, - sizeof(port_priv->write_buffer), - qt2_write_bulk_callback, port); - } - status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL); if (status != 0) { dev_err(&serial->dev->dev, @@ -828,14 +790,12 @@ static int qt2_setup_urbs(struct usb_serial *serial) } return 0; - } static int qt2_attach(struct usb_serial *serial) { struct qt2_serial_private *serial_priv; - struct qt2_port_private *port_priv; - int status, pcount; + int status; /* power on unit */ status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -855,26 +815,6 @@ static int qt2_attach(struct usb_serial *serial) usb_set_serial_data(serial, serial_priv); - for (pcount = 0; pcount < serial->num_ports; pcount++) { - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); - if (!port_priv) { - dev_err(&serial->dev->dev, - "%s- kmalloc(%Zd) failed.\n", __func__, - sizeof(*port_priv)); - pcount--; - status = -ENOMEM; - goto attach_failed; - } - - spin_lock_init(&port_priv->lock); - spin_lock_init(&port_priv->urb_lock); - init_waitqueue_head(&port_priv->delta_msr_wait); - - port_priv->port = serial->port[pcount]; - - usb_set_serial_port_data(serial->port[pcount], port_priv); - } - status = qt2_setup_urbs(serial); if (status != 0) goto attach_failed; @@ -882,14 +822,53 @@ static int qt2_attach(struct usb_serial *serial) return 0; attach_failed: - for (/* empty */; pcount >= 0; pcount--) { - port_priv = usb_get_serial_port_data(serial->port[pcount]); - kfree(port_priv); - } kfree(serial_priv); return status; } +static int qt2_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct qt2_port_private *port_priv; + u8 bEndpointAddress; + + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); + if (!port_priv) + return -ENOMEM; + + spin_lock_init(&port_priv->lock); + spin_lock_init(&port_priv->urb_lock); + init_waitqueue_head(&port_priv->delta_msr_wait); + port_priv->port = port; + + port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port_priv->write_urb) { + kfree(port_priv); + return -ENOMEM; + } + bEndpointAddress = serial->port[0]->bulk_out_endpointAddress; + usb_fill_bulk_urb(port_priv->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, bEndpointAddress), + port_priv->write_buffer, + sizeof(port_priv->write_buffer), + qt2_write_bulk_callback, port); + + usb_set_serial_port_data(port, port_priv); + + return 0; +} + +static int qt2_port_remove(struct usb_serial_port *port) +{ + struct qt2_port_private *port_priv; + + port_priv = usb_get_serial_port_data(port); + usb_free_urb(port_priv->write_urb); + kfree(port_priv); + + return 0; +} + static int qt2_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1128,6 +1107,8 @@ static struct usb_serial_driver qt2_device = { .attach = qt2_attach, .release = qt2_release, .disconnect = qt2_disconnect, + .port_probe = qt2_port_probe, + .port_remove = qt2_port_remove, .dtr_rts = qt2_dtr_rts, .break_ctl = qt2_break_ctl, .tiocmget = qt2_tiocmget, -- cgit v0.10.2 From 8e512ab0b675da20e023439a5811e3f2554e6852 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:09 +0200 Subject: USB: quatech2: fix close and disconnect urb handling Kill urbs unconditionally at close and disconnect. Note that URB status is not valid outside of completion handler. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 8d0c4a0..7e8d8f3 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -423,8 +423,7 @@ static void qt2_close(struct usb_serial_port *port) port_priv->is_open = false; spin_lock_irqsave(&port_priv->urb_lock, flags); - if (port_priv->write_urb->status == -EINPROGRESS) - usb_kill_urb(port_priv->write_urb); + usb_kill_urb(port_priv->write_urb); port_priv->urb_in_use = false; spin_unlock_irqrestore(&port_priv->urb_lock, flags); @@ -465,8 +464,7 @@ static void qt2_disconnect(struct usb_serial *serial) { struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); - if (serial_priv->read_urb->status == -EINPROGRESS) - usb_kill_urb(serial_priv->read_urb); + usb_kill_urb(serial_priv->read_urb); } static int get_serial_info(struct usb_serial_port *port, -- cgit v0.10.2 From 2f0295adf6438188c4cd0868f2b1976a2b034e1d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:10 +0200 Subject: USB: quatech2: fix io after disconnect Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 7e8d8f3..ffcfc96 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -427,6 +427,12 @@ static void qt2_close(struct usb_serial_port *port) port_priv->urb_in_use = false; spin_unlock_irqrestore(&port_priv->urb_lock, flags); + mutex_lock(&port->serial->disc_mutex); + if (port->serial->disconnected) { + mutex_unlock(&port->serial->disc_mutex); + return; + } + /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -458,6 +464,7 @@ static void qt2_close(struct usb_serial_port *port) dev_err(&port->dev, "%s - close port failed %i\n", __func__, i); + mutex_unlock(&port->serial->disc_mutex); } static void qt2_disconnect(struct usb_serial *serial) -- cgit v0.10.2 From ea0dbebffe118724cd4df7d9b071ea8ee48d48f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:11 +0200 Subject: USB: opticon: fix DMA from stack Make sure to allocate the control-message buffer dynamically as some platforms cannot do DMA from stack. Note that only the first byte of the old buffer was used. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 41b1647..459c288 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -155,7 +155,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, { struct usb_serial *serial = port->serial; int retval; - u8 buffer[2]; + u8 *buffer; + + buffer = kzalloc(1, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = val; /* Send the message to the vendor control endpoint @@ -164,6 +168,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, requesttype, USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 0, 0, buffer, 1, 0); + kfree(buffer); return retval; } -- cgit v0.10.2 From acbf0e5263de563e25f7c104868e4490b9e72b13 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:12 +0200 Subject: USB: opticon: fix memory leak in error path Fix memory leak in write error path. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 459c288..6aba731 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -286,7 +286,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, if (!dr) { dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; - goto error; + goto error_no_dr; } dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; @@ -316,6 +316,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, return count; error: + kfree(dr); +error_no_dr: usb_free_urb(urb); error_no_urb: kfree(buffer); -- cgit v0.10.2 From a8f2ae7a3aa59079d7e7e1ddf5007f03532f458c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:13 +0200 Subject: USB: mct_u232: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index f394771..a8bce13 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -49,7 +49,8 @@ * Function prototypes */ static int mct_u232_startup(struct usb_serial *serial); -static void mct_u232_release(struct usb_serial *serial); +static int mct_u232_port_probe(struct usb_serial_port *port); +static int mct_u232_port_remove(struct usb_serial_port *remove); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); static void mct_u232_close(struct usb_serial_port *port); static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); @@ -99,7 +100,8 @@ static struct usb_serial_driver mct_u232_device = { .tiocmget = mct_u232_tiocmget, .tiocmset = mct_u232_tiocmset, .attach = mct_u232_startup, - .release = mct_u232_release, + .port_probe = mct_u232_port_probe, + .port_remove = mct_u232_port_remove, .ioctl = mct_u232_ioctl, .get_icount = mct_u232_get_icount, }; @@ -388,18 +390,8 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port, static int mct_u232_startup(struct usb_serial *serial) { - struct mct_u232_private *priv; struct usb_serial_port *port, *rport; - priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL); - if (!priv) - return -ENOMEM; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->msr_wait); - usb_set_serial_port_data(serial->port[0], priv); - - init_waitqueue_head(&serial->port[0]->write_wait); - /* Puh, that's dirty */ port = serial->port[0]; rport = serial->port[1]; @@ -412,18 +404,31 @@ static int mct_u232_startup(struct usb_serial *serial) return 0; } /* mct_u232_startup */ +static int mct_u232_port_probe(struct usb_serial_port *port) +{ + struct mct_u232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; -static void mct_u232_release(struct usb_serial *serial) + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int mct_u232_port_remove(struct usb_serial_port *port) { struct mct_u232_private *priv; - int i; - for (i = 0; i < serial->num_ports; ++i) { - /* My special items, the standard routines free my urbs */ - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } -} /* mct_u232_release */ + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) { -- cgit v0.10.2 From 5260e458f5eff269a43e4f1e9c47186c57b88ddb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:14 +0200 Subject: USB: mct_u232: fix broken close Make sure generic close is called at close. The driver relies on the generic write implementation but did not call generic close. Note that the call to kill the read urb is not redundant, as mct_u232 uses an interrupt urb from the second port as the read urb and that generic close therefore fails to kill it. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a8bce13..8a20810 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -520,12 +520,14 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) static void mct_u232_close(struct usb_serial_port *port) { - if (port->serial->dev) { - /* shutdown our urbs */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - } + /* + * Must kill the read urb as it is actually an interrupt urb, which + * generic close thus fails to kill. + */ + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + usb_serial_generic_close(port); } /* mct_u232_close */ -- cgit v0.10.2 From f79b2d0fe81eecb412dc48e87a119afc690da8e9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:15 +0200 Subject: USB: keyspan: fix NULL-pointer dereferences and memory leaks Fix NULL-pointer dereference at release by moving port data allocation and deallocation to port_probe and port_remove. Fix NULL-pointer dereference at disconnect by stopping port urbs at port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer accessible at disconnect or release. Note that this patch also fixes port and interface-data memory leaks in the error path of attach should port initialisation fail for any port. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 29c943d..7179b0c 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1374,13 +1374,9 @@ static struct callbacks { data in device_details */ static void keyspan_setup_urbs(struct usb_serial *serial) { - int i, j; struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - struct usb_serial_port *port; - struct keyspan_port_private *p_priv; struct callbacks *cback; - int endp; s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -1404,45 +1400,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial) (serial, d_details->glocont_endpoint, USB_DIR_OUT, serial, s_priv->glocont_buf, GLOCONT_BUFLEN, cback->glocont_callback); - - /* Setup endpoints for each port specific thing */ - for (i = 0; i < d_details->num_ports; i++) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - - /* Do indat endpoints first, once for each flip */ - endp = d_details->indat_endpoints[i]; - for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) { - p_priv->in_urbs[j] = keyspan_setup_urb - (serial, endp, USB_DIR_IN, port, - p_priv->in_buffer[j], 64, - cback->indat_callback); - } - for (; j < 2; ++j) - p_priv->in_urbs[j] = NULL; - - /* outdat endpoints also have flip */ - endp = d_details->outdat_endpoints[i]; - for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) { - p_priv->out_urbs[j] = keyspan_setup_urb - (serial, endp, USB_DIR_OUT, port, - p_priv->out_buffer[j], 64, - cback->outdat_callback); - } - for (; j < 2; ++j) - p_priv->out_urbs[j] = NULL; - - /* inack endpoint */ - p_priv->inack_urb = keyspan_setup_urb - (serial, d_details->inack_endpoints[i], USB_DIR_IN, - port, p_priv->inack_buffer, 1, cback->inack_callback); - - /* outcont endpoint */ - p_priv->outcont_urb = keyspan_setup_urb - (serial, d_details->outcont_endpoints[i], USB_DIR_OUT, - port, p_priv->outcont_buffer, 64, - cback->outcont_callback); - } } /* usa19 function doesn't require prescaler */ @@ -2407,9 +2364,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) static int keyspan_startup(struct usb_serial *serial) { int i, err; - struct usb_serial_port *port; struct keyspan_serial_private *s_priv; - struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) @@ -2432,19 +2387,6 @@ static int keyspan_startup(struct usb_serial *serial) s_priv->device_details = d_details; usb_set_serial_data(serial, s_priv); - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - p_priv = kzalloc(sizeof(struct keyspan_port_private), - GFP_KERNEL); - if (!p_priv) { - dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i); - return 1; - } - p_priv->device_details = d_details; - usb_set_serial_port_data(port, p_priv); - } - keyspan_setup_urbs(serial); if (s_priv->instat_urb != NULL) { @@ -2463,59 +2405,112 @@ static int keyspan_startup(struct usb_serial *serial) static void keyspan_disconnect(struct usb_serial *serial) { - int i, j; - struct usb_serial_port *port; - struct keyspan_serial_private *s_priv; - struct keyspan_port_private *p_priv; + struct keyspan_serial_private *s_priv; s_priv = usb_get_serial_data(serial); - /* Stop reading/writing urbs */ stop_urb(s_priv->instat_urb); stop_urb(s_priv->glocont_urb); stop_urb(s_priv->indat_urb); - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - stop_urb(p_priv->inack_urb); - stop_urb(p_priv->outcont_urb); - for (j = 0; j < 2; j++) { - stop_urb(p_priv->in_urbs[j]); - stop_urb(p_priv->out_urbs[j]); - } - } +} + +static void keyspan_release(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); - /* Now free them */ usb_free_urb(s_priv->instat_urb); usb_free_urb(s_priv->indat_urb); usb_free_urb(s_priv->glocont_urb); - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - p_priv = usb_get_serial_port_data(port); - usb_free_urb(p_priv->inack_urb); - usb_free_urb(p_priv->outcont_urb); - for (j = 0; j < 2; j++) { - usb_free_urb(p_priv->in_urbs[j]); - usb_free_urb(p_priv->out_urbs[j]); - } - } + + kfree(s_priv); } -static void keyspan_release(struct usb_serial *serial) +static int keyspan_port_probe(struct usb_serial_port *port) { - int i; - struct usb_serial_port *port; - struct keyspan_serial_private *s_priv; + struct usb_serial *serial = port->serial; + struct keyspan_port_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + int endp; + int port_num; + int i; s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; - kfree(s_priv); + p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); + if (!p_priv) + return -ENOMEM; - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); + s_priv = usb_get_serial_data(port->serial); + p_priv->device_details = d_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + port_num = port->number - port->serial->minor; + + /* Do indat endpoints first, once for each flip */ + endp = d_details->indat_endpoints[port_num]; + for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { + p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_IN, port, + p_priv->in_buffer[i], 64, + cback->indat_callback); + } + /* outdat endpoints also have flip */ + endp = d_details->outdat_endpoints[port_num]; + for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { + p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_OUT, port, + p_priv->out_buffer[i], 64, + cback->outdat_callback); + } + /* inack endpoint */ + p_priv->inack_urb = keyspan_setup_urb(serial, + d_details->inack_endpoints[port_num], + USB_DIR_IN, port, + p_priv->inack_buffer, 1, + cback->inack_callback); + /* outcont endpoint */ + p_priv->outcont_urb = keyspan_setup_urb(serial, + d_details->outcont_endpoints[port_num], + USB_DIR_OUT, port, + p_priv->outcont_buffer, 64, + cback->outcont_callback); + + usb_set_serial_port_data(port, p_priv); + + return 0; +} + +static int keyspan_port_remove(struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + int i; + + p_priv = usb_get_serial_port_data(port); + + stop_urb(p_priv->inack_urb); + stop_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); + } + + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + usb_free_urb(p_priv->in_urbs[i]); + usb_free_urb(p_priv->out_urbs[i]); } + + kfree(p_priv); + + return 0; } MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 0a8a40b..0273dda 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -42,6 +42,8 @@ static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); static void keyspan_disconnect (struct usb_serial *serial); static void keyspan_release (struct usb_serial *serial); +static int keyspan_port_probe(struct usb_serial_port *port); +static int keyspan_port_remove(struct usb_serial_port *port); static int keyspan_write_room (struct tty_struct *tty); static int keyspan_write (struct tty_struct *tty, @@ -567,6 +569,8 @@ static struct usb_serial_driver keyspan_1port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_2port_device = { @@ -589,6 +593,8 @@ static struct usb_serial_driver keyspan_2port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_4port_device = { @@ -611,6 +617,8 @@ static struct usb_serial_driver keyspan_4port_device = { .attach = keyspan_startup, .disconnect = keyspan_disconnect, .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v0.10.2 From b8f0e82044c9ba40e92340c8a6d47d6bd6d819bc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:16 +0200 Subject: USB: usb-wwan: fix multiple memory leaks in error paths Fix port-data memory leak in usb-serial probe error path by moving port data allocation to port_probe. Since commit a1028f0abf ("usb: usb_wwan: replace release and disconnect with a port_remove hook") port data is deallocated in port_remove. This leaves a possibility for memory leaks if usb-serial probe fails after attach but before the port in question has been successfully registered. Note that this patch also fixes two additional memory leaks in the error path of attach should port initialisation fail for any port as the urbs were never freed and neither was the data of any of the successfully initialised ports. Compile-only tested. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 20a132e..add45b7 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -304,8 +304,8 @@ static struct usb_serial_driver ipw_device = { .open = ipw_open, .close = ipw_close, .probe = ipw_probe, - .attach = usb_wwan_startup, .release = ipw_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 54d4148..eb4bdd4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1288,8 +1288,8 @@ static struct usb_serial_driver option_1port_device = { .tiocmget = usb_wwan_tiocmget, .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, - .attach = usb_wwan_startup, .release = option_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index c3ddb65..8dd2280 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -285,8 +285,8 @@ static struct usb_serial_driver qcdevice = { .write = usb_wwan_write, .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, - .attach = usb_wwan_startup, .release = qc_release, + .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 1f034d2..684739b 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -8,7 +8,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); -extern int usb_wwan_startup(struct usb_serial *serial); +extern int usb_wwan_port_probe(struct usb_serial_port *port); extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index e42aa39..61a73ad 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -447,10 +447,12 @@ void usb_wwan_close(struct usb_serial_port *port) EXPORT_SYMBOL(usb_wwan_close); /* Helper functions used by usb_wwan_setup_urbs */ -static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, +static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, + int endpoint, int dir, void *ctx, char *buf, int len, void (*callback) (struct urb *)) { + struct usb_serial *serial = port->serial; struct urb *urb; if (endpoint == -1) @@ -472,101 +474,75 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint, return urb; } -/* Setup urbs */ -static void usb_wwan_setup_urbs(struct usb_serial *serial) +int usb_wwan_port_probe(struct usb_serial_port *port) { - int i, j; - struct usb_serial_port *port; struct usb_wwan_port_private *portdata; + struct urb *urb; + u8 *buffer; + int err; + int i; - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; - /* Do indat endpoints first */ - for (j = 0; j < N_IN_URB; ++j) { - portdata->in_urbs[j] = usb_wwan_setup_urb(serial, - port-> - bulk_in_endpointAddress, - USB_DIR_IN, - port, - portdata-> - in_buffer[j], - IN_BUFLEN, - usb_wwan_indat_callback); - } + init_usb_anchor(&portdata->delayed); - /* outdat endpoints */ - for (j = 0; j < N_OUT_URB; ++j) { - portdata->out_urbs[j] = usb_wwan_setup_urb(serial, - port-> - bulk_out_endpointAddress, - USB_DIR_OUT, - port, - portdata-> - out_buffer - [j], - OUT_BUFLEN, - usb_wwan_outdat_callback); - } + for (i = 0; i < N_IN_URB; i++) { + buffer = (u8 *)__get_free_page(GFP_KERNEL); + if (!buffer) + goto bail_out_error; + portdata->in_buffer[i] = buffer; + + urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, + USB_DIR_IN, port, + buffer, IN_BUFLEN, + usb_wwan_indat_callback); + portdata->in_urbs[i] = urb; } -} - -int usb_wwan_startup(struct usb_serial *serial) -{ - int i, j, err; - struct usb_serial_port *port; - struct usb_wwan_port_private *portdata; - u8 *buffer; - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); - if (!portdata) { - dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n", - __func__, i); - return 1; - } - init_usb_anchor(&portdata->delayed); + for (i = 0; i < N_OUT_URB; i++) { + if (port->bulk_out_endpointAddress == -1) + continue; - for (j = 0; j < N_IN_URB; j++) { - buffer = (u8 *) __get_free_page(GFP_KERNEL); - if (!buffer) - goto bail_out_error; - portdata->in_buffer[j] = buffer; - } + buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); + if (!buffer) + goto bail_out_error2; + portdata->out_buffer[i] = buffer; - for (j = 0; j < N_OUT_URB; j++) { - buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); - if (!buffer) - goto bail_out_error2; - portdata->out_buffer[j] = buffer; - } + urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, + USB_DIR_OUT, port, + buffer, OUT_BUFLEN, + usb_wwan_outdat_callback); + portdata->out_urbs[i] = urb; + } - usb_set_serial_port_data(port, portdata); + usb_set_serial_port_data(port, portdata); - if (!port->interrupt_in_urb) - continue; + if (port->interrupt_in_urb) { err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", __func__, err); } - usb_wwan_setup_urbs(serial); + return 0; bail_out_error2: - for (j = 0; j < N_OUT_URB; j++) - kfree(portdata->out_buffer[j]); + for (i = 0; i < N_OUT_URB; i++) { + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); + } bail_out_error: - for (j = 0; j < N_IN_URB; j++) - if (portdata->in_buffer[j]) - free_page((unsigned long)portdata->in_buffer[j]); + for (i = 0; i < N_IN_URB; i++) { + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } kfree(portdata); - return 1; + + return -ENOMEM; } -EXPORT_SYMBOL(usb_wwan_startup); +EXPORT_SYMBOL_GPL(usb_wwan_port_probe); int usb_wwan_port_remove(struct usb_serial_port *port) { -- cgit v0.10.2 From 7e41f9bcdd2e813ea2a3c40db291d87ea06b559f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:17 +0200 Subject: USB: sierra: fix memory leak in attach error path Make sure port private data is deallocated on errors in attach. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 76ef95b..2cb27e4 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -905,7 +905,7 @@ static int sierra_startup(struct usb_serial *serial) dev_dbg(&port->dev, "%s: kmalloc for " "sierra_port_private (%d) failed!\n", __func__, i); - return -ENOMEM; + goto err; } spin_lock_init(&portdata->lock); init_usb_anchor(&portdata->active); @@ -942,6 +942,13 @@ static int sierra_startup(struct usb_serial *serial) } return 0; +err: + for (--i; i >= 0; --i) { + portdata = usb_get_serial_port_data(serial->port[i]); + kfree(portdata); + } + + return -ENOMEM; } static void sierra_release(struct usb_serial *serial) -- cgit v0.10.2 From 084817d79399ab5ccab2f90a148b0369912a8369 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:18 +0200 Subject: USB: sierra: fix memory leak in probe error path Move interface data allocation to attach so that it is deallocated on errors in usb-serial probe. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 2cb27e4..bb2ecaf 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -161,7 +161,6 @@ static int sierra_probe(struct usb_serial *serial, { int result = 0; struct usb_device *udev; - struct sierra_intf_private *data; u8 ifnum; udev = serial->dev; @@ -188,11 +187,6 @@ static int sierra_probe(struct usb_serial *serial, return -ENODEV; } - data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); - if (!data) - return -ENOMEM; - spin_lock_init(&data->susp_lock); - return result; } @@ -885,11 +879,20 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on) static int sierra_startup(struct usb_serial *serial) { struct usb_serial_port *port; + struct sierra_intf_private *intfdata; struct sierra_port_private *portdata; struct sierra_iface_info *himemoryp = NULL; int i; u8 ifnum; + intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL); + if (!intfdata) + return -ENOMEM; + + spin_lock_init(&intfdata->susp_lock); + + usb_set_serial_data(serial, intfdata); + /* Set Device mode to D0 */ sierra_set_power_state(serial->dev, 0x0000); @@ -947,6 +950,7 @@ err: portdata = usb_get_serial_port_data(serial->port[i]); kfree(portdata); } + kfree(intfdata); return -ENOMEM; } -- cgit v0.10.2 From f525c05babc7938cc1d4236550fd8a659fb05960 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 10:29:19 +0200 Subject: USB: sierra: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note also that urb-count for multi-port interfaces has not been changed even though the usb-serial port number is now determined from the port and interface minor numbers. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index bb2ecaf..270860f 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -878,12 +878,7 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on) static int sierra_startup(struct usb_serial *serial) { - struct usb_serial_port *port; struct sierra_intf_private *intfdata; - struct sierra_port_private *portdata; - struct sierra_iface_info *himemoryp = NULL; - int i; - u8 ifnum; intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL); if (!intfdata) @@ -900,77 +895,71 @@ static int sierra_startup(struct usb_serial *serial) if (nmea) sierra_vsc_set_nmea(serial->dev, 1); - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); - if (!portdata) { - dev_dbg(&port->dev, "%s: kmalloc for " - "sierra_port_private (%d) failed!\n", - __func__, i); - goto err; - } - spin_lock_init(&portdata->lock); - init_usb_anchor(&portdata->active); - init_usb_anchor(&portdata->delayed); - ifnum = i; - /* Assume low memory requirements */ - portdata->num_out_urbs = N_OUT_URB; - portdata->num_in_urbs = N_IN_URB; - - /* Determine actual memory requirements */ - if (serial->num_ports == 1) { - /* Get interface number for composite device */ - ifnum = sierra_calc_interface(serial); - himemoryp = - (struct sierra_iface_info *)&typeB_interface_list; - if (is_himemory(ifnum, himemoryp)) { - portdata->num_out_urbs = N_OUT_URB_HM; - portdata->num_in_urbs = N_IN_URB_HM; - } - } - else { - himemoryp = - (struct sierra_iface_info *)&typeA_interface_list; - if (is_himemory(i, himemoryp)) { - portdata->num_out_urbs = N_OUT_URB_HM; - portdata->num_in_urbs = N_IN_URB_HM; - } - } - dev_dbg(&serial->dev->dev, - "Memory usage (urbs) interface #%d, in=%d, out=%d\n", - ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); - /* Set the port private data pointer */ - usb_set_serial_port_data(port, portdata); + return 0; +} + +static void sierra_release(struct usb_serial *serial) +{ + struct sierra_intf_private *intfdata; + + intfdata = usb_get_serial_data(serial); + kfree(intfdata); +} + +static int sierra_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + const struct sierra_iface_info *himemoryp; + u8 ifnum; + + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; + + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); + + /* Assume low memory requirements */ + portdata->num_out_urbs = N_OUT_URB; + portdata->num_in_urbs = N_IN_URB; + + /* Determine actual memory requirements */ + if (serial->num_ports == 1) { + /* Get interface number for composite device */ + ifnum = sierra_calc_interface(serial); + himemoryp = &typeB_interface_list; + } else { + /* This is really the usb-serial port number of the interface + * rather than the interface number. + */ + ifnum = port->number - serial->minor; + himemoryp = &typeA_interface_list; } - return 0; -err: - for (--i; i >= 0; --i) { - portdata = usb_get_serial_port_data(serial->port[i]); - kfree(portdata); + if (is_himemory(ifnum, himemoryp)) { + portdata->num_out_urbs = N_OUT_URB_HM; + portdata->num_in_urbs = N_IN_URB_HM; } - kfree(intfdata); - return -ENOMEM; + dev_dbg(&port->dev, + "Memory usage (urbs) interface #%d, in=%d, out=%d\n", + ifnum, portdata->num_in_urbs, portdata->num_out_urbs); + + usb_set_serial_port_data(port, portdata); + + return 0; } -static void sierra_release(struct usb_serial *serial) +static int sierra_port_remove(struct usb_serial_port *port) { - int i; - struct usb_serial_port *port; struct sierra_port_private *portdata; - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - if (!port) - continue; - portdata = usb_get_serial_port_data(port); - if (!portdata) - continue; - kfree(portdata); - } - kfree(serial->private); + portdata = usb_get_serial_port_data(port); + kfree(portdata); + + return 0; } #ifdef CONFIG_PM @@ -1074,6 +1063,8 @@ static struct usb_serial_driver sierra_device = { .tiocmset = sierra_tiocmset, .attach = sierra_startup, .release = sierra_release, + .port_probe = sierra_port_probe, + .port_remove = sierra_port_remove, .suspend = sierra_suspend, .resume = sierra_resume, .read_int_callback = sierra_instat_callback, -- cgit v0.10.2 From 65a4cdbb170e4ec1a7fa0e94936d47e24a17b0e8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 13:35:09 +0200 Subject: USB: mos7840: fix urb leak at release Make sure control urb is freed at release. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index d6d4eec..35ad3f5 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2645,6 +2645,7 @@ static void mos7840_release(struct usb_serial *serial) del_timer_sync(&mos7840_port->led_timer1); del_timer_sync(&mos7840_port->led_timer2); } + usb_free_urb(mos7840_port->control_urb); kfree(mos7840_port->ctrl_buf); kfree(mos7840_port->dr); kfree(mos7840_port); -- cgit v0.10.2 From 3eb55cc4ed88eee3b5230f66abcdbd2a91639eda Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 13:35:10 +0200 Subject: USB: mos7840: fix port-device leak in error path The driver set the usb-serial port pointers to NULL on errors in attach, effectively preventing usb-serial core from decrementing the port ref counters and releasing the port devices and associated data. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 35ad3f5..c5e5a6c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2587,7 +2587,6 @@ error: kfree(mos7840_port->ctrl_buf); usb_free_urb(mos7840_port->control_urb); kfree(mos7840_port); - serial->port[i] = NULL; } return status; } -- cgit v0.10.2 From a997448c89905b80aa4022f734f03685e733d711 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 15:42:39 +0200 Subject: USB: ipw: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index add45b7..4264821 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -203,8 +203,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } -/* fake probe - only to allocate data structures */ -static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id) +static int ipw_attach(struct usb_serial *serial) { struct usb_wwan_intf_private *data; @@ -303,7 +302,7 @@ static struct usb_serial_driver ipw_device = { .num_ports = 1, .open = ipw_open, .close = ipw_close, - .probe = ipw_probe, + .attach = ipw_attach, .release = ipw_release, .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, -- cgit v0.10.2 From c2dd4a8eac7821fed2c2d19e4607d0986b53b0fe Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 15:42:40 +0200 Subject: USB: option: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Note that the usb device id is stored at probe so that it can be used in attach to determine send-setup blacklisting. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index eb4bdd4..5dee7d6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -47,6 +47,7 @@ /* Function prototypes */ static int option_probe(struct usb_serial *serial, const struct usb_device_id *id); +static int option_attach(struct usb_serial *serial); static void option_release(struct usb_serial *serial); static int option_send_setup(struct usb_serial_port *port); static void option_instat_callback(struct urb *urb); @@ -1288,6 +1289,7 @@ static struct usb_serial_driver option_1port_device = { .tiocmget = usb_wwan_tiocmget, .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, + .attach = option_attach, .release = option_release, .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, @@ -1335,8 +1337,6 @@ static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason, static int option_probe(struct usb_serial *serial, const struct usb_device_id *id) { - struct usb_wwan_intf_private *data; - struct option_private *priv; struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; @@ -1374,6 +1374,19 @@ static int option_probe(struct usb_serial *serial, iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) return -ENODEV; + /* Store device id so we can use it during attach. */ + usb_set_serial_data(serial, (void *)id); + + return 0; +} + +static int option_attach(struct usb_serial *serial) +{ + struct usb_interface_descriptor *iface_desc; + const struct usb_device_id *id; + struct usb_wwan_intf_private *data; + struct option_private *priv; + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) return -ENOMEM; @@ -1384,6 +1397,10 @@ static int option_probe(struct usb_serial *serial, return -ENOMEM; } + /* Retrieve device id stored at probe. */ + id = usb_get_serial_data(serial); + iface_desc = &serial->interface->cur_altsetting->desc; + priv->bInterfaceNumber = iface_desc->bInterfaceNumber; data->private = priv; -- cgit v0.10.2 From 961be09e1ead58509ed4bed0d5819a15d8613d8d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 15:42:41 +0200 Subject: USB: qcserial: fix interface-data memory leak in error path Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8dd2280..aa148c2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -138,7 +138,6 @@ MODULE_DEVICE_TABLE(usb, id_table); static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { - struct usb_wwan_intf_private *data; struct usb_host_interface *intf = serial->interface->cur_altsetting; struct device *dev = &serial->dev->dev; int retval = -ENODEV; @@ -154,13 +153,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) ifnum = intf->desc.bInterfaceNumber; dev_dbg(dev, "This Interface = %d\n", ifnum); - data = kzalloc(sizeof(struct usb_wwan_intf_private), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - spin_lock_init(&data->susp_lock); - if (nintf == 1) { /* QDL mode */ /* Gobi 2000 has a single altsetting, older ones have two */ @@ -253,20 +245,28 @@ done: } } - /* Set serial->private if not returning error */ - if (retval == 0) - usb_set_serial_data(serial, data); - else - kfree(data); - return retval; } +static int qc_attach(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + + usb_set_serial_data(serial, data); + + return 0; +} + static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -285,6 +285,7 @@ static struct usb_serial_driver qcdevice = { .write = usb_wwan_write, .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, + .attach = qc_attach, .release = qc_release, .port_probe = usb_wwan_port_probe, .port_remove = usb_wwan_port_remove, -- cgit v0.10.2 From 5189c2a7c7769ee9d037d76c1a7b8550ccf3481c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 24 Oct 2012 10:00:44 -0700 Subject: x86: efi: Turn off efi_enabled after setup on mixed fw/kernel When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off efi_enabled once setup is done. Beyond setup, it is normally used to determine if runtime services are available and we will have none. This will resolve issues stemming from efivars modprobe panicking on a 32/64-bit setup, as well as some reboot issues on similar setups. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991 Reported-by: Marko Kohtala Reported-by: Maxim Kammerer Signed-off-by: Olof Johansson Acked-by: Maarten Lankhorst Cc: stable@kernel.org # 3.4 - 3.6 Cc: Matthew Garrett Signed-off-by: Matt Fleming diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index c9dcc18..029189db 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -98,6 +98,7 @@ extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern int efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); extern void efi_call_phys_epilog(void); +extern void efi_unmap_memmap(void); #ifndef CONFIG_EFI /* diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a2bb18e..6fd7752 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1035,6 +1035,18 @@ void __init setup_arch(char **cmdline_p) arch_init_ideal_nops(); register_refined_jiffies(CLOCK_TICK_RATE); + +#ifdef CONFIG_EFI + /* Once setup is done above, disable efi_enabled on mismatched + * firmware/kernel archtectures since there is no support for + * runtime services. + */ + if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) { + pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n"); + efi_unmap_memmap(); + efi_enabled = 0; + } +#endif } #ifdef CONFIG_X86_32 diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index aded2a9..9bae3b7 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -70,11 +70,15 @@ EXPORT_SYMBOL(efi); struct efi_memory_map memmap; bool efi_64bit; -static bool efi_native; static struct efi efi_phys __initdata; static efi_system_table_t efi_systab __initdata; +static inline bool efi_is_native(void) +{ + return IS_ENABLED(CONFIG_X86_64) == efi_64bit; +} + static int __init setup_noefi(char *arg) { efi_enabled = 0; @@ -420,7 +424,7 @@ void __init efi_reserve_boot_services(void) } } -static void __init efi_unmap_memmap(void) +void __init efi_unmap_memmap(void) { if (memmap.map) { early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size); @@ -432,7 +436,7 @@ void __init efi_free_boot_services(void) { void *p; - if (!efi_native) + if (!efi_is_native()) return; for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { @@ -684,12 +688,10 @@ void __init efi_init(void) return; } efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab; - efi_native = !efi_64bit; #else efi_phys.systab = (efi_system_table_t *) (boot_params.efi_info.efi_systab | ((__u64)boot_params.efi_info.efi_systab_hi<<32)); - efi_native = efi_64bit; #endif if (efi_systab_init(efi_phys.systab)) { @@ -723,7 +725,7 @@ void __init efi_init(void) * that doesn't match the kernel 32/64-bit mode. */ - if (!efi_native) + if (!efi_is_native()) pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n"); else if (efi_runtime_init()) { efi_enabled = 0; @@ -735,7 +737,7 @@ void __init efi_init(void) return; } #ifdef CONFIG_X86_32 - if (efi_native) { + if (efi_is_native()) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } @@ -834,7 +836,7 @@ void __init efi_enter_virtual_mode(void) * non-native EFI */ - if (!efi_native) { + if (!efi_is_native()) { efi_unmap_memmap(); return; } -- cgit v0.10.2 From 28c3ae9a8cf45f439c9a0779ebd0256e2ae72813 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 18:56:32 +0200 Subject: USB: mos7840: remove NULL-urb submission The private int_urb is never allocated so the submission from the control completion handler will always fail. Remove this odd piece of broken code. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c5e5a6c..f2c4bb7 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -218,7 +218,6 @@ struct moschip_port { int port_num; /*Actual port number in the device(1,2,etc) */ struct urb *write_urb; /* write URB for this port */ struct urb *read_urb; /* read URB for this port */ - struct urb *int_urb; __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ char open; @@ -478,7 +477,6 @@ static void mos7840_control_callback(struct urb *urb) struct moschip_port *mos7840_port; struct device *dev = &urb->dev->dev; __u8 regval = 0x0; - int result = 0; int status = urb->status; mos7840_port = urb->context; @@ -495,7 +493,7 @@ static void mos7840_control_callback(struct urb *urb) return; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - goto exit; + return; } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); @@ -508,16 +506,6 @@ static void mos7840_control_callback(struct urb *urb) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) mos7840_handle_new_lsr(mos7840_port, regval); - -exit: - spin_lock(&mos7840_port->pool_lock); - if (!mos7840_port->zombie) - result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); - spin_unlock(&mos7840_port->pool_lock); - if (result) { - dev_err(dev, "%s - Error %d submitting interrupt urb\n", - __func__, result); - } } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, -- cgit v0.10.2 From e681b66f2e19fadbe8a7e2a17900978cb6bc921f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 18:56:33 +0200 Subject: USB: mos7840: remove invalid disconnect handling Remove private zombie flag used to signal disconnect and to prevent control urb from being submitted from interrupt urb completion handler. The control urb will not be re-submitted as both the control urb and the interrupt urb is killed on disconnect. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index f2c4bb7..84f8c10 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -222,7 +222,6 @@ struct moschip_port { __u8 shadowMCR; /* last MCR value received */ char open; char open_ports; - char zombie; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ int delta_msr_cond; @@ -674,14 +673,7 @@ static void mos7840_interrupt_callback(struct urb *urb) wreg = MODEM_STATUS_REGISTER; break; } - spin_lock(&mos7840_port->pool_lock); - if (!mos7840_port->zombie) { - rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); - } else { - spin_unlock(&mos7840_port->pool_lock); - return; - } - spin_unlock(&mos7840_port->pool_lock); + rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); } } } @@ -2598,9 +2590,6 @@ static void mos7840_disconnect(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); if (mos7840_port) { - spin_lock_irqsave(&mos7840_port->pool_lock, flags); - mos7840_port->zombie = 1; - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); usb_kill_urb(mos7840_port->control_urb); } } -- cgit v0.10.2 From 80c00750f0c9867a65b30a17880939b6bc660a77 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 18:56:34 +0200 Subject: USB: mos7840: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the indentation was kept intact using a do-while(0) in order to facilitate review. A follow-up patch will remove it. Compile-only tested. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 84f8c10..bc3df86 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2327,49 +2327,45 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } -/**************************************************************************** - * mos7840_startup - ****************************************************************************/ - -static int mos7840_startup(struct usb_serial *serial) +static int mos7840_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct moschip_port *mos7840_port; - struct usb_device *dev; - int i, status; + int status; + int pnum; __u16 Data; - dev = serial->dev; - /* we set up the pointers to the endpoints in the mos7840_open * * function, as the structures aren't created yet. */ - /* set up port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i); + pnum = port->number - serial->minor; + + /* FIXME: remove do-while(0) loop used to keep stable patch minimal. + */ + do { + dev_dbg(&port->dev, "mos7840_startup: configuring port %d............\n", pnum); mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { - dev_err(&dev->dev, "%s - Out of memory\n", __func__); - status = -ENOMEM; - i--; /* don't follow NULL pointer cleaning up */ - goto error; + dev_err(&port->dev, "%s - Out of memory\n", __func__); + return -ENOMEM; } /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt end point * common to all port */ - mos7840_port->port = serial->port[i]; - mos7840_set_port_private(serial->port[i], mos7840_port); + mos7840_port->port = port; + mos7840_set_port_private(port, mos7840_port); spin_lock_init(&mos7840_port->pool_lock); /* minor is not initialised until later by * usb-serial.c:get_free_serial() and cannot therefore be used * to index device instances */ - mos7840_port->port_num = i + 1; - dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number); - dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor); - dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); - dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor); + mos7840_port->port_num = pnum + 1; + dev_dbg(&port->dev, "port->number = %d\n", port->number); + dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); + dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2396,115 +2392,115 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->ControlRegOffset = 0xd; mos7840_port->DcrRegOffset = 0x1c; } - mos7840_dump_serial_port(serial->port[i], mos7840_port); - mos7840_set_port_private(serial->port[i], mos7840_port); + mos7840_dump_serial_port(port, mos7840_port); + mos7840_set_port_private(port, mos7840_port); /* enable rx_disable bit in control register */ - status = mos7840_get_reg_sync(serial->port[i], + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); if (status < 0) { - dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status); + dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); + dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); Data |= 0x08; /* setting driver done bit */ Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */ /* Data |= 0x20; //rx_disable bit */ - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); + dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status); + dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 */ Data = 0x01; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, (__u16) (mos7840_port->DcrRegOffset + 0), Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status); + dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); Data = 0x05; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, (__u16) (mos7840_port->DcrRegOffset + 1), Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status); + dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); Data = 0x24; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, (__u16) (mos7840_port->DcrRegOffset + 2), Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status); + dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); /* write values in clkstart0x0 and clkmulti 0x20 */ Data = 0x0; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); + dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); goto error; } else - dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); + dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); /* write value 0x0 to scratchpad register */ Data = 0x00; - status = mos7840_set_uart_reg(serial->port[i], + status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); if (status < 0) { - dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); + dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); break; } else - dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); /* Zero Length flag register */ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { Data = 0xff; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num)), Data); - dev_dbg(&dev->dev, "ZLIP offset %x\n", + dev_dbg(&port->dev, "ZLIP offset %x\n", (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); break; } else - dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status); + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); } else { Data = 0xff; - status = mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(port, (__u16) (ZLP_REG1 + ((__u16)mos7840_port->port_num) - 0x1), Data); - dev_dbg(&dev->dev, "ZLIP offset %x\n", + dev_dbg(&port->dev, "ZLIP offset %x\n", (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status); + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); break; } else - dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status); + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); } mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2541,92 +2537,56 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->led_flag = false; /* Turn off LED */ - mos7840_set_led_sync(serial->port[i], + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); } - } + } while (0); - /* Zero Length flag enable */ - Data = 0x0f; - status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); - if (status < 0) { - dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); - goto error; - } else - dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); + if (pnum == serial->num_ports - 1) { + /* Zero Length flag enable */ + Data = 0x0f; + status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x03, 0x00, 0x01, 0x00, NULL, 0x00, + MOS_WDR_TIMEOUT); + } return 0; error: - for (/* nothing */; i >= 0; i--) { - mos7840_port = mos7840_get_port_private(serial->port[i]); + kfree(mos7840_port->dr); + kfree(mos7840_port->ctrl_buf); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port); - kfree(mos7840_port->dr); - kfree(mos7840_port->ctrl_buf); - usb_free_urb(mos7840_port->control_urb); - kfree(mos7840_port); - } return status; } -/**************************************************************************** - * mos7840_disconnect - * This function is called whenever the device is removed from the usb bus. - ****************************************************************************/ - -static void mos7840_disconnect(struct usb_serial *serial) +static int mos7840_port_remove(struct usb_serial_port *port) { - int i; - unsigned long flags; struct moschip_port *mos7840_port; - /* check for the ports to be closed,close the ports and disconnect */ + mos7840_port = mos7840_get_port_private(port); - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ + if (mos7840_port->has_led) { + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); - for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = mos7840_get_port_private(serial->port[i]); - if (mos7840_port) { - usb_kill_urb(mos7840_port->control_urb); - } + del_timer_sync(&mos7840_port->led_timer1); + del_timer_sync(&mos7840_port->led_timer2); } -} - -/**************************************************************************** - * mos7840_release - * This function is called when the usb_serial structure is freed. - ****************************************************************************/ - -static void mos7840_release(struct usb_serial *serial) -{ - int i; - struct moschip_port *mos7840_port; + usb_kill_urb(mos7840_port->control_urb); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); - /* check for the ports to be closed,close the ports and disconnect */ - - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ - - for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = mos7840_get_port_private(serial->port[i]); - if (mos7840_port) { - if (mos7840_port->has_led) { - /* Turn off LED */ - mos7840_set_led_sync(mos7840_port->port, - MODEM_CONTROL_REGISTER, 0x0300); - - del_timer_sync(&mos7840_port->led_timer1); - del_timer_sync(&mos7840_port->led_timer2); - } - usb_free_urb(mos7840_port->control_urb); - kfree(mos7840_port->ctrl_buf); - kfree(mos7840_port->dr); - kfree(mos7840_port); - } - } + return 0; } static struct usb_serial_driver moschip7840_4port_device = { @@ -2654,9 +2614,8 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmget = mos7840_tiocmget, .tiocmset = mos7840_tiocmset, .get_icount = mos7840_get_icount, - .attach = mos7840_startup, - .disconnect = mos7840_disconnect, - .release = mos7840_release, + .port_probe = mos7840_port_probe, + .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, .read_int_callback = mos7840_interrupt_callback, }; -- cgit v0.10.2 From ae685effe70cbe11fc269741629022f76005ea99 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Oct 2012 18:56:35 +0200 Subject: USB: mos7840: fix port_probe flow Remove temporary do-while(0) loop used to keep changes minimal. Fixup indentation, remove some line breaks, and replace break with goto to maintain flow. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index bc3df86..1cf3375 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2340,208 +2340,191 @@ static int mos7840_port_probe(struct usb_serial_port *port) pnum = port->number - serial->minor; - /* FIXME: remove do-while(0) loop used to keep stable patch minimal. - */ - do { - dev_dbg(&port->dev, "mos7840_startup: configuring port %d............\n", pnum); - mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7840_port == NULL) { - dev_err(&port->dev, "%s - Out of memory\n", __func__); - return -ENOMEM; - } - - /* Initialize all port interrupt end point to port 0 int - * endpoint. Our device has only one interrupt end point - * common to all port */ - - mos7840_port->port = port; - mos7840_set_port_private(port, mos7840_port); - spin_lock_init(&mos7840_port->pool_lock); - - /* minor is not initialised until later by - * usb-serial.c:get_free_serial() and cannot therefore be used - * to index device instances */ - mos7840_port->port_num = pnum + 1; - dev_dbg(&port->dev, "port->number = %d\n", port->number); - dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); - dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); - dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); - - if (mos7840_port->port_num == 1) { - mos7840_port->SpRegOffset = 0x0; - mos7840_port->ControlRegOffset = 0x1; - mos7840_port->DcrRegOffset = 0x4; - } else if ((mos7840_port->port_num == 2) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0x8; - mos7840_port->ControlRegOffset = 0x9; - mos7840_port->DcrRegOffset = 0x16; - } else if ((mos7840_port->port_num == 2) - && (serial->num_ports == 2)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 3) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 4) - && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xc; - mos7840_port->ControlRegOffset = 0xd; - mos7840_port->DcrRegOffset = 0x1c; - } - mos7840_dump_serial_port(port, mos7840_port); - mos7840_set_port_private(port, mos7840_port); + dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (mos7840_port == NULL) { + dev_err(&port->dev, "%s - Out of memory\n", __func__); + return -ENOMEM; + } - /* enable rx_disable bit in control register */ - status = mos7840_get_reg_sync(port, - mos7840_port->ControlRegOffset, &Data); - if (status < 0) { - dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); - break; - } else - dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); - Data |= 0x08; /* setting driver done bit */ - Data |= 0x04; /* sp1_bit to have cts change reflect in - modem status reg */ + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt end point + * common to all port */ + + mos7840_port->port = port; + mos7840_set_port_private(port, mos7840_port); + spin_lock_init(&mos7840_port->pool_lock); + + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = pnum + 1; + dev_dbg(&port->dev, "port->number = %d\n", port->number); + dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); + dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); + + if (mos7840_port->port_num == 1) { + mos7840_port->SpRegOffset = 0x0; + mos7840_port->ControlRegOffset = 0x1; + mos7840_port->DcrRegOffset = 0x4; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0x8; + mos7840_port->ControlRegOffset = 0x9; + mos7840_port->DcrRegOffset = 0x16; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xc; + mos7840_port->ControlRegOffset = 0xd; + mos7840_port->DcrRegOffset = 0x1c; + } + mos7840_dump_serial_port(port, mos7840_port); + mos7840_set_port_private(port, mos7840_port); + + /* enable rx_disable bit in control register */ + status = mos7840_get_reg_sync(port, + mos7840_port->ControlRegOffset, &Data); + if (status < 0) { + dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); + Data |= 0x08; /* setting driver done bit */ + Data |= 0x04; /* sp1_bit to have cts change reflect in + modem status reg */ + + /* Data |= 0x20; //rx_disable bit */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); + + /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 + and 0x24 in DCR3 */ + Data = 0x01; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 0), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); - /* Data |= 0x20; //rx_disable bit */ - status = mos7840_set_reg_sync(port, - mos7840_port->ControlRegOffset, Data); - if (status < 0) { - dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); - break; - } else - dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); + Data = 0x05; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 1), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); - /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 - and 0x24 in DCR3 */ - Data = 0x01; - status = mos7840_set_reg_sync(port, - (__u16) (mos7840_port->DcrRegOffset + 0), Data); - if (status < 0) { - dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); - break; - } else - dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); + Data = 0x24; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 2), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); - Data = 0x05; - status = mos7840_set_reg_sync(port, - (__u16) (mos7840_port->DcrRegOffset + 1), Data); - if (status < 0) { - dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); - break; - } else - dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); + /* write values in clkstart0x0 and clkmulti 0x20 */ + Data = 0x0; + status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); - Data = 0x24; - status = mos7840_set_reg_sync(port, - (__u16) (mos7840_port->DcrRegOffset + 2), Data); - if (status < 0) { - dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); - break; - } else - dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); + Data = 0x20; + status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); - /* write values in clkstart0x0 and clkmulti 0x20 */ - Data = 0x0; + /* write value 0x0 to scratchpad register */ + Data = 0x00; + status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + + /* Zero Length flag register */ + if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { + Data = 0xff; status = mos7840_set_reg_sync(port, - CLK_START_VALUE_REGISTER, Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num)), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); if (status < 0) { - dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); - break; + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); + goto out; } else - dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); - - Data = 0x20; + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); + } else { + Data = 0xff; status = mos7840_set_reg_sync(port, - CLK_MULTI_REGISTER, Data); - if (status < 0) { - dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); - goto error; - } else - dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); - - /* write value 0x0 to scratchpad register */ - Data = 0x00; - status = mos7840_set_uart_reg(port, - SCRATCH_PAD_REGISTER, Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num) - 0x1), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); if (status < 0) { - dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); - break; + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); + goto out; } else - dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); - /* Zero Length flag register */ - if ((mos7840_port->port_num != 1) - && (serial->num_ports == 2)) { - - Data = 0xff; - status = mos7840_set_reg_sync(port, - (__u16) (ZLP_REG1 + - ((__u16)mos7840_port->port_num)), Data); - dev_dbg(&port->dev, "ZLIP offset %x\n", - (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); - if (status < 0) { - dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); - break; - } else - dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); - } else { - Data = 0xff; - status = mos7840_set_reg_sync(port, - (__u16) (ZLP_REG1 + - ((__u16)mos7840_port->port_num) - 0x1), Data); - dev_dbg(&port->dev, "ZLIP offset %x\n", - (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); - if (status < 0) { - dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); - break; - } else - dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); - - } - mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); - mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), - GFP_KERNEL); - if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || - !mos7840_port->dr) { - status = -ENOMEM; - goto error; - } - - mos7840_port->has_led = false; + } + mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || + !mos7840_port->dr) { + status = -ENOMEM; + goto error; + } - /* Initialize LED timers */ - if (device_type == MOSCHIP_DEVICE_ID_7810) { - mos7840_port->has_led = true; + mos7840_port->has_led = false; - init_timer(&mos7840_port->led_timer1); - mos7840_port->led_timer1.function = mos7840_led_off; - mos7840_port->led_timer1.expires = - jiffies + msecs_to_jiffies(LED_ON_MS); - mos7840_port->led_timer1.data = - (unsigned long)mos7840_port; + /* Initialize LED timers */ + if (device_type == MOSCHIP_DEVICE_ID_7810) { + mos7840_port->has_led = true; - init_timer(&mos7840_port->led_timer2); - mos7840_port->led_timer2.function = - mos7840_led_flag_off; - mos7840_port->led_timer2.expires = - jiffies + msecs_to_jiffies(LED_OFF_MS); - mos7840_port->led_timer2.data = - (unsigned long)mos7840_port; + init_timer(&mos7840_port->led_timer1); + mos7840_port->led_timer1.function = mos7840_led_off; + mos7840_port->led_timer1.expires = + jiffies + msecs_to_jiffies(LED_ON_MS); + mos7840_port->led_timer1.data = (unsigned long)mos7840_port; - mos7840_port->led_flag = false; + init_timer(&mos7840_port->led_timer2); + mos7840_port->led_timer2.function = mos7840_led_flag_off; + mos7840_port->led_timer2.expires = + jiffies + msecs_to_jiffies(LED_OFF_MS); + mos7840_port->led_timer2.data = (unsigned long)mos7840_port; - /* Turn off LED */ - mos7840_set_led_sync(port, - MODEM_CONTROL_REGISTER, 0x0300); - } - } while (0); + mos7840_port->led_flag = false; + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); + } +out: if (pnum == serial->num_ports - 1) { /* Zero Length flag enable */ Data = 0x0f; -- cgit v0.10.2 From c323dc023b9501e5d09582ec7efd1d40a9001d99 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Tue, 9 Oct 2012 12:22:36 +0200 Subject: ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions BIOS vendors keep changing the BIOS versions. Only match the beginning of the string to match all Lucid tablets with board name M11JB. Signed-off-by: Anisse Astier Cc: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 966d148..ead4525 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -545,7 +545,7 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { /* Pegatron Lucid (Ordissimo AIRIS) */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "M11JB"), - DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"), + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), }, }, { } -- cgit v0.10.2 From 8daf8b6086f9d575200cd0aa3797e26137255609 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Tue, 9 Oct 2012 12:22:37 +0200 Subject: ehci: Add yet-another Lucid nohandoff pci quirk Board name changed on another shipping Lucid tablet. Signed-off-by: Anisse Astier Cc: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ead4525..39f9e4a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -548,6 +548,13 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), }, }, + { + /* Pegatron Lucid (Ordissimo) */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"), + DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), + }, + }, { } }; -- cgit v0.10.2 From 10bd4c7572b6c6eb97f1c15dedd2d36c63907f91 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 24 Oct 2012 10:49:33 +0800 Subject: firmware loader: document kernel direct loading This patch adds description on recently introduced direct firmware loading by Linus. Cc: Linus Torvalds Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README index 7eceaff..815b711 100644 --- a/Documentation/firmware_class/README +++ b/Documentation/firmware_class/README @@ -18,32 +18,40 @@ High level behavior (mixed): ============================ - kernel(driver): calls request_firmware(&fw_entry, $FIRMWARE, device) - - userspace: + 1), kernel(driver): + - calls request_firmware(&fw_entry, $FIRMWARE, device) + - kernel searchs the fimware image with name $FIRMWARE directly + in the below search path of root filesystem: + "/lib/firmware/updates/" UTS_RELEASE, + "/lib/firmware/updates", + "/lib/firmware/" UTS_RELEASE, + "/lib/firmware" + - If found, goto 7), else goto 2) + + 2), userspace: - /sys/class/firmware/xxx/{loading,data} appear. - hotplug gets called with a firmware identifier in $FIRMWARE and the usual hotplug environment. - hotplug: echo 1 > /sys/class/firmware/xxx/loading - kernel: Discard any previous partial load. + 3), kernel: Discard any previous partial load. - userspace: + 4), userspace: - hotplug: cat appropriate_firmware_image > \ /sys/class/firmware/xxx/data - kernel: grows a buffer in PAGE_SIZE increments to hold the image as it + 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it comes in. - userspace: + 6), userspace: - hotplug: echo 0 > /sys/class/firmware/xxx/loading - kernel: request_firmware() returns and the driver has the firmware + 7), kernel: request_firmware() returns and the driver has the firmware image in fw_entry->{data,size}. If something went wrong request_firmware() returns non-zero and fw_entry is set to NULL. - kernel(driver): Driver code calls release_firmware(fw_entry) releasing + 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing the firmware image and any related resource. High level behavior (driver code): -- cgit v0.10.2 From b5416d32a6f1a4cd4e399654b4bac7f558ab237e Mon Sep 17 00:00:00 2001 From: Tekkaman Ninja Date: Thu, 27 Sep 2012 23:36:33 +0800 Subject: Documentation:Chinese translation of Documentation/IRQ.txt This is a Chinese translated version of Documentation/IRQ.txt Signed-off-by: Fu Wei Acked-by: Harry Wei Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/zh_CN/IRQ.txt b/Documentation/zh_CN/IRQ.txt new file mode 100644 index 0000000..956026d --- /dev/null +++ b/Documentation/zh_CN/IRQ.txt @@ -0,0 +1,39 @@ +Chinese translated version of Documentation/IRQ.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Eric W. Biederman +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/IRQ.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 +英文版维护者： Eric W. Biederman +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + + +以下为正文 +--------------------------------------------------------------------- +何为 IRQ? + +一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚， +或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。 + +一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个 +全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现， +具体的细节是体系结构特定的。 + +一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是 +该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况， +枚举的是在两个 i8259 中断控制器中 16 个输入引脚。 + +架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下， +是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。 -- cgit v0.10.2 From 4bdac7b668d29dcaa53b72921b7f6a51d0f80b9b Mon Sep 17 00:00:00 2001 From: Tekkaman Ninja Date: Wed, 24 Oct 2012 23:56:47 +0800 Subject: Documentation:Chinese translation of Documentation/arm64/booting.txt This is a Chinese translated version of Documentation/arm64/booting.txt Signed-off-by: Fu Wei Acked-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt new file mode 100644 index 0000000..28fa325 --- /dev/null +++ b/Documentation/zh_CN/arm64/booting.txt @@ -0,0 +1,156 @@ +Chinese translated version of Documentation/arm64/booting.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Will Deacon +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/arm64/booting.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +英文版维护者： Will Deacon +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + +以下为正文 +--------------------------------------------------------------------- + 启动 AArch64 Linux + ================== + +作者: Will Deacon +日期: 2012 年 09 月 07 日 + +本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的 +AArch64 Linux 内核代码。 + +AArch64 异常模型由多个异常级别（EL0 - EL3）组成，对于 EL0 和 EL1 +异常级有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于 +非安全模式下。EL3 是最高特权级，且仅存在于安全模式下。 + +基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’） +这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。 +这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动 +环境的指令。 + +基本上，引导装载程序（至少）应实现以下操作： + +1、设置和初始化 RAM +2、设置设备树数据 +3、解压内核映像 +4、调用内核映像 + + +1、设置和初始化 RAM +----------------- + +必要性: 强制 + +引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。 +这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有 +RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序 +设计者想到的匹配方法。） + + +2、设置设备树数据 +--------------- + +必要性: 强制 + +设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个 +512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来 +映射此数据块。 + + +3、解压内核映像 +------------- + +必要性: 可选 + +AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件 +（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。 +若引导装载程序没有实现这个需求，就要使用非压缩内核映像文件。 + + +4、调用内核映像 +------------- + +必要性: 强制 + +已解压的内核映像包含一个 32 字节的头，内容如下： + + u32 magic = 0x14000008; /* 跳转到 stext, 小端 */ + u32 res0 = 0; /* 保留 */ + u64 text_offset; /* 映像装载偏移 */ + u64 res1 = 0; /* 保留 */ + u64 res2 = 0; /* 保留 */ + +映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM +的起始地址必须是以 2MB 对齐的。 + +在跳转入内核前，必须符合以下状态： + +- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而 + 被破坏。这可能可以节省你许多的调试时间。 + +- 主 CPU 通用寄存器设置 + x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。 + x1 = 0 (保留，将来可能使用) + x2 = 0 (保留，将来可能使用) + x3 = 0 (保留，将来可能使用) + +- CPU 模式 + 所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ + 和 FIQ）。 + CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。 + +- 高速缓存、MMU + MMU 必须关闭。 + 指令缓存开启或关闭都可以。 + 数据缓存必须关闭且无效。 + 外部高速缓存（如果存在）必须配置并禁用。 + +- 架构计时器 + CNTFRQ 必须设定为计时器的频率。 + 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0) + 必须置位。 + +- 一致性 + 通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。 + 这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的 + 接收。 + +- 系统寄存器 + 在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件 + 在一个更高的异常级别下初始化，以防止在 未知 状态下运行。 + +引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口： + +- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树 + 数据块必须在每个 CPU 节点中包含以下内容： + + 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。 + + 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。 + + 引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入 + 数据块。 + +- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递 + 给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须 + 包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将 + 发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值 + 时，CPU 必须直接跳入此值所指向的地址。 + +- 辅助 CPU 通用寄存器设置 + x0 = 0 (保留，将来可能使用) + x1 = 0 (保留，将来可能使用) + x2 = 0 (保留，将来可能使用) + x3 = 0 (保留，将来可能使用) -- cgit v0.10.2 From bf34be058158fd30622601346819d098dc5d623f Mon Sep 17 00:00:00 2001 From: Tekkaman Ninja Date: Thu, 25 Oct 2012 00:02:53 +0800 Subject: Documentation:Chinese translation of Documentation/arm64/memory.txt This is a Chinese translated version of Documentation/arm64/memory.txt Signed-off-by: Fu Wei Acked-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt new file mode 100644 index 0000000..83b5193 --- /dev/null +++ b/Documentation/zh_CN/arm64/memory.txt @@ -0,0 +1,93 @@ +Chinese translated version of Documentation/arm64/memory.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Catalin Marinas +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/arm64/memory.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +英文版维护者： Catalin Marinas +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + +以下为正文 +--------------------------------------------------------------------- + Linux 在 AArch64 中的内存布局 + =========================== + +作者: Catalin Marinas +日期: 2012 年 02 月 20 日 + +本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现 +页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。 + +AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和内核 +都有 39-bit (512GB) 的虚拟地址空间。对于页大小为 64KB的配置，仅 +使用 2 级转换表，但内存布局相同。 + +用户地址空间的 63:39 位为 0，而内核地址空间的相应位为 1。TTBRx 的 +选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射， +而用户 pgd 仅包含用户（非全局）映射。swapper_pgd_dir 地址被写入 +TTBR1 中，且从不写入 TTBR0。 + + +AArch64 Linux 内存布局： + +起始地址 结束地址 大小 用途 +----------------------------------------------------------------------- +0000000000000000 0000007fffffffff 512GB 用户空间 + +ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc + +ffffffbbfffd0000 ffffffbcfffdffff 64KB [防护页] + +ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O 空间 + +ffffffbbffff0000 ffffffbcffffffff 64KB [防护页] + +ffffffbc00000000 ffffffbdffffffff 8GB vmemmap + +ffffffbe00000000 ffffffbffbffffff ~8GB [防护页，未来用于 vmmemap] + +ffffffbffc000000 ffffffbfffffffff 64MB 模块 + +ffffffc000000000 ffffffffffffffff 256GB 内存空间 + + +4KB 页大小的转换表查找： + ++--------+--------+--------+--------+--------+--------+--------+--------+ +|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| ++--------+--------+--------+--------+--------+--------+--------+--------+ + | | | | | | + | | | | | v + | | | | | [11:0] 页内偏移 + | | | | +-> [20:12] L3 索引 + | | | +-----------> [29:21] L2 索引 + | | +---------------------> [38:30] L1 索引 + | +-------------------------------> [47:39] L0 索引 (未使用) + +-------------------------------------------------> [63] TTBR0/1 + + +64KB 页大小的转换表查找： + ++--------+--------+--------+--------+--------+--------+--------+--------+ +|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| ++--------+--------+--------+--------+--------+--------+--------+--------+ + | | | | | + | | | | v + | | | | [15:0] 页内偏移 + | | | +----------> [28:16] L3 索引 + | | +--------------------------> [41:29] L2 索引 (仅使用 38:29 ) + | +-------------------------------> [47:42] L1 索引 (未使用) + +-------------------------------------------------> [63] TTBR0/1 -- cgit v0.10.2 From 2cb55a2f47a3c695a0105b7fc04a3b70c3bc4e4f Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Tue, 16 Oct 2012 22:59:04 +0800 Subject: sonypi: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP This will fix warnings like following when CONFIG_PM_SLEEP is not set: warning: 'xxx_suspend' defined but not used [-Wunused-function] warning: 'xxx_resume' defined but not used [-Wunused-function] Because SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM). Cc: Mattia Dongili Cc: Arnd Bergmann Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Yuanhan Liu Signed-off-by: Fengguang Wu Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 320debb..9b4f011 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1456,7 +1456,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int old_camera_power; static int sonypi_suspend(struct device *dev) -- cgit v0.10.2 From 661bec6ba884b86517ef5ea529aabb281a7198d9 Mon Sep 17 00:00:00 2001 From: Gabriel de Perthuis Date: Wed, 10 Oct 2012 08:50:47 -0600 Subject: Fix a sign bug causing invalid memory access in the ino_paths ioctl. To see the problem, create many hardlinks to the same file (120 should do it), then look up paths by inode with: ls -i btrfs inspect inode-resolve -v $ino /mnt/btrfs I noticed the memory layout of the fspath->val data had some irregularities (some unnecessary gaps that stop appearing about halfway), so I'm not sure there aren't any bugs left in it. diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index f318793..2bcbea3 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1186,7 +1186,7 @@ static char *ref_to_path(struct btrfs_root *fs_root, int slot; u64 next_inum; int ret; - s64 bytes_left = size - 1; + s64 bytes_left = ((s64)size) - 1; struct extent_buffer *eb = eb_in; struct btrfs_key found_key; int leave_spinning = path->leave_spinning; -- cgit v0.10.2 From 84167d190569eedcdb24bf2499bdda437e442962 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 11 Oct 2012 07:25:16 -0600 Subject: Btrfs: Fix wrong error handling code gcc says "warning: comparison of unsigned expression >= 0 is always true" because i is an unsigned long. And gcc is right this time. Signed-off-by: Stefan Behrens diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 64dc93f..a32ebfe 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4104,8 +4104,8 @@ struct extent_buffer *alloc_dummy_extent_buffer(u64 start, unsigned long len) return eb; err: - for (i--; i >= 0; i--) - __free_page(eb->pages[i]); + for (; i > 0; i--) + __free_page(eb->pages[i - 1]); __free_extent_buffer(eb); return NULL; } -- cgit v0.10.2 From 96b5bd777118bb673b458b41bbefc7f0f31d65c9 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Mon, 15 Oct 2012 08:30:45 +0000 Subject: Btrfs: extended inode refs support for send mechanism This adds support for the new extended inode refs to btrfs send. Signed-off-by: Jan Schmidt diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 2bcbea3..b8b6926 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1177,11 +1177,10 @@ int btrfs_find_one_extref(struct btrfs_root *root, u64 inode_objectid, return ret; } -static char *ref_to_path(struct btrfs_root *fs_root, - struct btrfs_path *path, - u32 name_len, unsigned long name_off, - struct extent_buffer *eb_in, u64 parent, - char *dest, u32 size) +char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, + u32 name_len, unsigned long name_off, + struct extent_buffer *eb_in, u64 parent, + char *dest, u32 size) { int slot; u64 next_inum; @@ -1266,10 +1265,10 @@ char *btrfs_iref_to_path(struct btrfs_root *fs_root, struct extent_buffer *eb_in, u64 parent, char *dest, u32 size) { - return ref_to_path(fs_root, path, - btrfs_inode_ref_name_len(eb_in, iref), - (unsigned long)(iref + 1), - eb_in, parent, dest, size); + return btrfs_ref_to_path(fs_root, path, + btrfs_inode_ref_name_len(eb_in, iref), + (unsigned long)(iref + 1), + eb_in, parent, dest, size); } /* @@ -1715,9 +1714,8 @@ static int inode_to_path(u64 inum, u32 name_len, unsigned long name_off, ipath->fspath->bytes_left - s_ptr : 0; fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr; - fspath = ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len, - name_off, eb, inum, fspath_min, - bytes_left); + fspath = btrfs_ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len, + name_off, eb, inum, fspath_min, bytes_left); if (IS_ERR(fspath)) return PTR_ERR(fspath); diff --git a/fs/btrfs/backref.h b/fs/btrfs/backref.h index e755330..d61feca7 100644 --- a/fs/btrfs/backref.h +++ b/fs/btrfs/backref.h @@ -62,6 +62,10 @@ int btrfs_find_all_roots(struct btrfs_trans_handle *trans, char *btrfs_iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, struct btrfs_inode_ref *iref, struct extent_buffer *eb, u64 parent, char *dest, u32 size); +char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, + u32 name_len, unsigned long name_off, + struct extent_buffer *eb_in, u64 parent, + char *dest, u32 size); struct btrfs_data_container *init_data_container(u32 total_bytes); struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root, diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index c7beb54..4f20c49 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -745,31 +745,36 @@ typedef int (*iterate_inode_ref_t)(int num, u64 dir, int index, void *ctx); /* - * Helper function to iterate the entries in ONE btrfs_inode_ref. + * Helper function to iterate the entries in ONE btrfs_inode_ref or + * btrfs_inode_extref. * The iterate callback may return a non zero value to stop iteration. This can * be a negative value for error codes or 1 to simply stop it. * - * path must point to the INODE_REF when called. + * path must point to the INODE_REF or INODE_EXTREF when called. */ static int iterate_inode_ref(struct send_ctx *sctx, struct btrfs_root *root, struct btrfs_path *path, struct btrfs_key *found_key, int resolve, iterate_inode_ref_t iterate, void *ctx) { - struct extent_buffer *eb; + struct extent_buffer *eb = path->nodes[0]; struct btrfs_item *item; struct btrfs_inode_ref *iref; + struct btrfs_inode_extref *extref; struct btrfs_path *tmp_path; struct fs_path *p; - u32 cur; - u32 len; + u32 cur = 0; u32 total; - int slot; + int slot = path->slots[0]; u32 name_len; char *start; int ret = 0; - int num; + int num = 0; int index; + u64 dir; + unsigned long name_off; + unsigned long elem_size; + unsigned long ptr; p = fs_path_alloc_reversed(sctx); if (!p) @@ -781,24 +786,40 @@ static int iterate_inode_ref(struct send_ctx *sctx, return -ENOMEM; } - eb = path->nodes[0]; - slot = path->slots[0]; - item = btrfs_item_nr(eb, slot); - iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref); - cur = 0; - len = 0; - total = btrfs_item_size(eb, item); - num = 0; + if (found_key->type == BTRFS_INODE_REF_KEY) { + ptr = (unsigned long)btrfs_item_ptr(eb, slot, + struct btrfs_inode_ref); + item = btrfs_item_nr(eb, slot); + total = btrfs_item_size(eb, item); + elem_size = sizeof(*iref); + } else { + ptr = btrfs_item_ptr_offset(eb, slot); + total = btrfs_item_size_nr(eb, slot); + elem_size = sizeof(*extref); + } + while (cur < total) { fs_path_reset(p); - name_len = btrfs_inode_ref_name_len(eb, iref); - index = btrfs_inode_ref_index(eb, iref); + if (found_key->type == BTRFS_INODE_REF_KEY) { + iref = (struct btrfs_inode_ref *)(ptr + cur); + name_len = btrfs_inode_ref_name_len(eb, iref); + name_off = (unsigned long)(iref + 1); + index = btrfs_inode_ref_index(eb, iref); + dir = found_key->offset; + } else { + extref = (struct btrfs_inode_extref *)(ptr + cur); + name_len = btrfs_inode_extref_name_len(eb, extref); + name_off = (unsigned long)&extref->name; + index = btrfs_inode_extref_index(eb, extref); + dir = btrfs_inode_extref_parent(eb, extref); + } + if (resolve) { - start = btrfs_iref_to_path(root, tmp_path, iref, eb, - found_key->offset, p->buf, - p->buf_len); + start = btrfs_ref_to_path(root, tmp_path, name_len, + name_off, eb, dir, + p->buf, p->buf_len); if (IS_ERR(start)) { ret = PTR_ERR(start); goto out; @@ -809,9 +830,10 @@ static int iterate_inode_ref(struct send_ctx *sctx, p->buf_len + p->buf - start); if (ret < 0) goto out; - start = btrfs_iref_to_path(root, tmp_path, iref, - eb, found_key->offset, p->buf, - p->buf_len); + start = btrfs_ref_to_path(root, tmp_path, + name_len, name_off, + eb, dir, + p->buf, p->buf_len); if (IS_ERR(start)) { ret = PTR_ERR(start); goto out; @@ -820,21 +842,16 @@ static int iterate_inode_ref(struct send_ctx *sctx, } p->start = start; } else { - ret = fs_path_add_from_extent_buffer(p, eb, - (unsigned long)(iref + 1), name_len); + ret = fs_path_add_from_extent_buffer(p, eb, name_off, + name_len); if (ret < 0) goto out; } - - len = sizeof(*iref) + name_len; - iref = (struct btrfs_inode_ref *)((char *)iref + len); - cur += len; - - ret = iterate(num, found_key->offset, index, p, ctx); + cur += elem_size + name_len; + ret = iterate(num, dir, index, p, ctx); if (ret) goto out; - num++; } @@ -998,7 +1015,8 @@ static int get_inode_path(struct send_ctx *sctx, struct btrfs_root *root, } btrfs_item_key_to_cpu(p->nodes[0], &found_key, p->slots[0]); if (found_key.objectid != ino || - found_key.type != BTRFS_INODE_REF_KEY) { + (found_key.type != BTRFS_INODE_REF_KEY && + found_key.type != BTRFS_INODE_EXTREF_KEY)) { ret = -ENOENT; goto out; } @@ -1551,8 +1569,8 @@ static int get_first_ref(struct send_ctx *sctx, struct btrfs_key key; struct btrfs_key found_key; struct btrfs_path *path; - struct btrfs_inode_ref *iref; int len; + u64 parent_dir; path = alloc_path_for_send(); if (!path) @@ -1568,27 +1586,41 @@ static int get_first_ref(struct send_ctx *sctx, if (!ret) btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]); - if (ret || found_key.objectid != key.objectid || - found_key.type != key.type) { + if (ret || found_key.objectid != ino || + (found_key.type != BTRFS_INODE_REF_KEY && + found_key.type != BTRFS_INODE_EXTREF_KEY)) { ret = -ENOENT; goto out; } - iref = btrfs_item_ptr(path->nodes[0], path->slots[0], - struct btrfs_inode_ref); - len = btrfs_inode_ref_name_len(path->nodes[0], iref); - ret = fs_path_add_from_extent_buffer(name, path->nodes[0], - (unsigned long)(iref + 1), len); + if (key.type == BTRFS_INODE_REF_KEY) { + struct btrfs_inode_ref *iref; + iref = btrfs_item_ptr(path->nodes[0], path->slots[0], + struct btrfs_inode_ref); + len = btrfs_inode_ref_name_len(path->nodes[0], iref); + ret = fs_path_add_from_extent_buffer(name, path->nodes[0], + (unsigned long)(iref + 1), + len); + parent_dir = found_key.offset; + } else { + struct btrfs_inode_extref *extref; + extref = btrfs_item_ptr(path->nodes[0], path->slots[0], + struct btrfs_inode_extref); + len = btrfs_inode_extref_name_len(path->nodes[0], extref); + ret = fs_path_add_from_extent_buffer(name, path->nodes[0], + (unsigned long)&extref->name, len); + parent_dir = btrfs_inode_extref_parent(path->nodes[0], extref); + } if (ret < 0) goto out; btrfs_release_path(path); - ret = get_inode_info(root, found_key.offset, NULL, dir_gen, NULL, NULL, + ret = get_inode_info(root, parent_dir, NULL, dir_gen, NULL, NULL, NULL, NULL); if (ret < 0) goto out; - *dir = found_key.offset; + *dir = parent_dir; out: btrfs_free_path(path); @@ -3226,7 +3258,8 @@ static int process_all_refs(struct send_ctx *sctx, btrfs_item_key_to_cpu(eb, &found_key, slot); if (found_key.objectid != key.objectid || - found_key.type != key.type) + (found_key.type != BTRFS_INODE_REF_KEY && + found_key.type != BTRFS_INODE_EXTREF_KEY)) break; ret = iterate_inode_ref(sctx, root, path, &found_key, 0, cb, @@ -3987,7 +4020,7 @@ static int process_recorded_refs_if_needed(struct send_ctx *sctx, int at_end) if (sctx->cur_ino == 0) goto out; if (!at_end && sctx->cur_ino == sctx->cmp_key->objectid && - sctx->cmp_key->type <= BTRFS_INODE_REF_KEY) + sctx->cmp_key->type <= BTRFS_INODE_EXTREF_KEY) goto out; if (list_empty(&sctx->new_refs) && list_empty(&sctx->deleted_refs)) goto out; @@ -4335,7 +4368,8 @@ static int changed_cb(struct btrfs_root *left_root, if (key->type == BTRFS_INODE_ITEM_KEY) ret = changed_inode(sctx, result); - else if (key->type == BTRFS_INODE_REF_KEY) + else if (key->type == BTRFS_INODE_REF_KEY || + key->type == BTRFS_INODE_EXTREF_KEY) ret = changed_ref(sctx, result); else if (key->type == BTRFS_XATTR_ITEM_KEY) ret = changed_xattr(sctx, result); -- cgit v0.10.2 From d79e50433b2bea09eb680ed5fae15e8a12356353 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Mon, 15 Oct 2012 18:28:46 +0000 Subject: Btrfs: send correct rdev and mode in btrfs-send When sending a device file, the stream was missing the mode. Also the rdev was encoded wrongly. Signed-off-by: Arne Jansen diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 4f20c49..97cc539 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -2462,7 +2462,8 @@ verbose_printk("btrfs: send_create_inode %llu\n", ino); TLV_PUT_PATH(sctx, BTRFS_SEND_A_PATH_LINK, p); } else if (S_ISCHR(mode) || S_ISBLK(mode) || S_ISFIFO(mode) || S_ISSOCK(mode)) { - TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, rdev); + TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, new_encode_dev(rdev)); + TLV_PUT_U64(sctx, BTRFS_SEND_A_MODE, mode); } ret = send_cmd(sctx); -- cgit v0.10.2 From 5b7ff5b3c4468780b15c6b20cd0567cd9f2aa626 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Tue, 16 Oct 2012 05:44:21 +0000 Subject: Btrfs: fix memory leak in btrfs_quota_enable() We should free quota_root before returning from the error handling code. Signed-off-by: Tsutomu Itoh diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 5039686..fe9d02c 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -790,8 +790,10 @@ int btrfs_quota_enable(struct btrfs_trans_handle *trans, } path = btrfs_alloc_path(); - if (!path) - return -ENOMEM; + if (!path) { + ret = -ENOMEM; + goto out_free_root; + } key.objectid = 0; key.type = BTRFS_QGROUP_STATUS_KEY; @@ -800,7 +802,7 @@ int btrfs_quota_enable(struct btrfs_trans_handle *trans, ret = btrfs_insert_empty_item(trans, quota_root, path, &key, sizeof(*ptr)); if (ret) - goto out; + goto out_free_path; leaf = path->nodes[0]; ptr = btrfs_item_ptr(leaf, path->slots[0], @@ -818,8 +820,15 @@ int btrfs_quota_enable(struct btrfs_trans_handle *trans, fs_info->quota_root = quota_root; fs_info->pending_quota_state = 1; spin_unlock(&fs_info->qgroup_lock); -out: +out_free_path: btrfs_free_path(path); +out_free_root: + if (ret) { + free_extent_buffer(quota_root->node); + free_extent_buffer(quota_root->commit_root); + kfree(quota_root); + } +out: return ret; } -- cgit v0.10.2 From e515c18bfef718a7900924d50198d968565dd60e Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Tue, 16 Oct 2012 09:34:36 +0000 Subject: btrfs: Return EINVAL when length to trim is less than FSB Currently if len argument in btrfs_ioctl_fitrim() is smaller than one FSB we will continue and finally return 0 bytes discarded. However if the length to discard is smaller then file system block we should really return EINVAL. Signed-off-by: Lukas Czerner diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f5a2e6c..da518de 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -343,7 +343,8 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg) return -EOPNOTSUPP; if (copy_from_user(&range, arg, sizeof(range))) return -EFAULT; - if (range.start > total_bytes) + if (range.start > total_bytes || + range.len < fs_info->sb->s_blocksize) return -EINVAL; range.len = min(range.len, total_bytes - range.start); -- cgit v0.10.2 From 671415b7db49f62896f0b6d50fc4f312a0512983 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 16 Oct 2012 11:26:46 +0000 Subject: Btrfs: fix deadlock caused by the nested chunk allocation Steps to reproduce: # mkfs.btrfs -m raid1 # btrfstune -S 1 # mount # btrfs device add # mount -o remount,rw # dd if=/dev/zero of=/tmpfile bs=1M count=1 Deadlock happened. It is because of the nested chunk allocation. When we wrote the data into the filesystem, we would allocate the data chunk because there was no data chunk in the filesystem. At the end of the data chunk allocation, we should insert the metadata of the data chunk into the extent tree, but there was no raid1 chunk, so we tried to lock the chunk allocation mutex to allocate the new chunk, but we had held the mutex, the deadlock happened. By rights, we would allocate the raid1 chunk when we added the second device because the profile of the seed filesystem is raid1 and we had two devices. But we didn't do that in fact. It is because the last step of the first device insertion didn't commit the transaction. So when we added the second device, we didn't cow the tree, and just inserted the relative metadata into the leaves which were generated by the first device insertion, and its profile was dup. So, I fix this problem by commiting the transaction at the end of the first device insertion. Signed-off-by: Miao Xie diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 029b903..0f5ebb7 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1819,6 +1819,13 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) "Failed to relocate sys chunks after " "device initialization. This can be fixed " "using the \"btrfs balance\" command."); + trans = btrfs_attach_transaction(root); + if (IS_ERR(trans)) { + if (PTR_ERR(trans) == -ENOENT) + return 0; + return PTR_ERR(trans); + } + ret = btrfs_commit_transaction(trans, root); } return ret; -- cgit v0.10.2 From e2d044fe77f8e845333bb1bd29587dc08a4346a0 Mon Sep 17 00:00:00 2001 From: Alex Lyakas Date: Wed, 17 Oct 2012 13:52:47 +0000 Subject: Btrfs: Send: preserve ownership (uid and gid) also for symlinks. This patch also requires a change in the user-space part of "receive". We need to use "lchown" instead of "chown". We will do this in the following patch. Signed-off-by: Alex Lyakas if (S_ISREG(sctx->cur_inode_mode)) { diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 97cc539..e78b297 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -4067,22 +4067,21 @@ static int finish_inode_if_needed(struct send_ctx *sctx, int at_end) if (ret < 0) goto out; - if (!S_ISLNK(sctx->cur_inode_mode)) { - if (!sctx->parent_root || sctx->cur_inode_new) { + if (!sctx->parent_root || sctx->cur_inode_new) { + need_chown = 1; + if (!S_ISLNK(sctx->cur_inode_mode)) need_chmod = 1; - need_chown = 1; - } else { - ret = get_inode_info(sctx->parent_root, sctx->cur_ino, - NULL, NULL, &right_mode, &right_uid, - &right_gid, NULL); - if (ret < 0) - goto out; + } else { + ret = get_inode_info(sctx->parent_root, sctx->cur_ino, + NULL, NULL, &right_mode, &right_uid, + &right_gid, NULL); + if (ret < 0) + goto out; - if (left_uid != right_uid || left_gid != right_gid) - need_chown = 1; - if (left_mode != right_mode) - need_chmod = 1; - } + if (left_uid != right_uid || left_gid != right_gid) + need_chown = 1; + if (!S_ISLNK(sctx->cur_inode_mode) && left_mode != right_mode) + need_chmod = 1; } if (S_ISREG(sctx->cur_inode_mode)) { -- cgit v0.10.2 From be6aef604920406b348acf3be6e6e8db55696386 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 22 Oct 2012 15:43:12 -0400 Subject: Btrfs: Use btrfs_update_inode_fallback when creating a snapshot On a really full file system I was getting ENOSPC back from btrfs_update_inode when trying to update the parent inode when creating a snapshot. Just use the fallback method so we can update the inode and not have to worry about having a delayed ref. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 1630be8..8a92ab1 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3338,6 +3338,8 @@ struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page, int btrfs_update_inode(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode); +int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode); int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode); int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode); int btrfs_orphan_cleanup(struct btrfs_root *root); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f92def2..5fc0990 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -94,8 +94,6 @@ static noinline int cow_file_range(struct inode *inode, struct page *locked_page, u64 start, u64 end, int *page_started, unsigned long *nr_written, int unlock); -static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode); static int btrfs_init_inode_security(struct btrfs_trans_handle *trans, struct inode *inode, struct inode *dir, @@ -2746,8 +2744,9 @@ noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, return btrfs_update_inode_item(trans, root, inode); } -static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct inode *inode) +noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct inode *inode) { int ret; diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 77db875..04bbfb1 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1200,7 +1200,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_i_size_write(parent_inode, parent_inode->i_size + dentry->d_name.len * 2); parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME; - ret = btrfs_update_inode(trans, parent_root, parent_inode); + ret = btrfs_update_inode_fallback(trans, parent_root, parent_inode); if (ret) btrfs_abort_transaction(trans, root, ret); fail: -- cgit v0.10.2 From f7fbf70ee9db6da6033ae50d100e017ac1f26555 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 25 Oct 2012 11:10:18 -0700 Subject: mac80211: don't inspect Sequence Control field on control frames Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is not present in control frames. We noticed this problem when processing Block Ack Requests. Cc: stable@vger.kernel.org Signed-off-by: Javier Cardona Signed-off-by: Javier Lopez Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index f73e0dd..c6865f2 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1462,6 +1462,10 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) hdr = (struct ieee80211_hdr *)rx->skb->data; fc = hdr->frame_control; + + if (ieee80211_is_ctl(fc)) + return RX_CONTINUE; + sc = le16_to_cpu(hdr->seq_ctrl); frag = sc & IEEE80211_SCTL_FRAG; -- cgit v0.10.2 From 7bfdcf7fbad56c0f1fc3e2d26431bed72bdcce2d Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 25 Oct 2012 07:30:19 -0600 Subject: Btrfs: fix memory leak when cloning root's node After cloning root's node, we forgot to dec the src's ref which can lead to a memory leak. Signed-off-by: Liu Bo Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index eba44b0..cdfb4c4 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1241,6 +1241,7 @@ get_old_root(struct btrfs_root *root, u64 time_seq) { struct tree_mod_elem *tm; struct extent_buffer *eb; + struct extent_buffer *old; struct tree_mod_root *old_root = NULL; u64 old_generation = 0; u64 logical; @@ -1264,13 +1265,14 @@ get_old_root(struct btrfs_root *root, u64 time_seq) btrfs_tree_read_unlock(root->node); free_extent_buffer(root->node); blocksize = btrfs_level_size(root, old_root->level); - eb = read_tree_block(root, logical, blocksize, 0); - if (!eb) { + old = read_tree_block(root, logical, blocksize, 0); + if (!old) { pr_warn("btrfs: failed to read tree block %llu from get_old_root\n", logical); WARN_ON(1); } else { - eb = btrfs_clone_extent_buffer(eb); + eb = btrfs_clone_extent_buffer(old); + free_extent_buffer(old); } } else if (old_root) { btrfs_tree_read_unlock(root->node); -- cgit v0.10.2 From 975927b942c932bd839ed07e5d40b4037d816844 Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Thu, 25 Oct 2012 21:58:17 +0200 Subject: block: Add blk_rq_pos(rq) to sort rq when plushing My workload is a raid5 which had 16 disks. And used our filesystem to write using direct-io mode. I used the blktrace to find those message: 8,16 0 6647 2.453665504 2579 M W 7493152 + 8 [md0_raid5] 8,16 0 6648 2.453672411 2579 Q W 7493160 + 8 [md0_raid5] 8,16 0 6649 2.453672606 2579 M W 7493160 + 8 [md0_raid5] 8,16 0 6650 2.453679255 2579 Q W 7493168 + 8 [md0_raid5] 8,16 0 6651 2.453679441 2579 M W 7493168 + 8 [md0_raid5] 8,16 0 6652 2.453685948 2579 Q W 7493176 + 8 [md0_raid5] 8,16 0 6653 2.453686149 2579 M W 7493176 + 8 [md0_raid5] 8,16 0 6654 2.453693074 2579 Q W 7493184 + 8 [md0_raid5] 8,16 0 6655 2.453693254 2579 M W 7493184 + 8 [md0_raid5] 8,16 0 6656 2.453704290 2579 Q W 7493192 + 8 [md0_raid5] 8,16 0 6657 2.453704482 2579 M W 7493192 + 8 [md0_raid5] 8,16 0 6658 2.453715016 2579 Q W 7493200 + 8 [md0_raid5] 8,16 0 6659 2.453715247 2579 M W 7493200 + 8 [md0_raid5] 8,16 0 6660 2.453721730 2579 Q W 7493208 + 8 [md0_raid5] 8,16 0 6661 2.453721974 2579 M W 7493208 + 8 [md0_raid5] 8,16 0 6662 2.453728202 2579 Q W 7493216 + 8 [md0_raid5] 8,16 0 6663 2.453728436 2579 M W 7493216 + 8 [md0_raid5] 8,16 0 6664 2.453734782 2579 Q W 7493224 + 8 [md0_raid5] 8,16 0 6665 2.453735019 2579 M W 7493224 + 8 [md0_raid5] 8,16 0 6666 2.453741401 2579 Q W 7493232 + 8 [md0_raid5] 8,16 0 6667 2.453741632 2579 M W 7493232 + 8 [md0_raid5] 8,16 0 6668 2.453748148 2579 Q W 7493240 + 8 [md0_raid5] 8,16 0 6669 2.453748386 2579 M W 7493240 + 8 [md0_raid5] 8,16 0 6670 2.453851843 2579 I W 7493144 + 104 [md0_raid5] 8,16 0 0 2.453853661 0 m N cfq2579 insert_request 8,16 0 6671 2.453854064 2579 I W 7493120 + 24 [md0_raid5] 8,16 0 0 2.453854439 0 m N cfq2579 insert_request 8,16 0 6672 2.453854793 2579 U N [md0_raid5] 2 8,16 0 0 2.453855513 0 m N cfq2579 Not idling.st->count:1 8,16 0 0 2.453855927 0 m N cfq2579 dispatch_insert 8,16 0 0 2.453861771 0 m N cfq2579 dispatched a request 8,16 0 0 2.453862248 0 m N cfq2579 activate rq,drv=1 8,16 0 6673 2.453862332 2579 D W 7493120 + 24 [md0_raid5] 8,16 0 0 2.453865957 0 m N cfq2579 Not idling.st->count:1 8,16 0 0 2.453866269 0 m N cfq2579 dispatch_insert 8,16 0 0 2.453866707 0 m N cfq2579 dispatched a request 8,16 0 0 2.453867061 0 m N cfq2579 activate rq,drv=2 8,16 0 6674 2.453867145 2579 D W 7493144 + 104 [md0_raid5] 8,16 0 6675 2.454147608 0 C W 7493120 + 24 [0] 8,16 0 0 2.454149357 0 m N cfq2579 complete rqnoidle 0 8,16 0 6676 2.454791505 0 C W 7493144 + 104 [0] 8,16 0 0 2.454794803 0 m N cfq2579 complete rqnoidle 0 8,16 0 0 2.454795160 0 m N cfq schedule dispatch From above messages,we can find rq[W 7493144 + 104] and rq[W 7493120 + 24] do not merge. Because the bio order is: 8,16 0 6638 2.453619407 2579 Q W 7493144 + 8 [md0_raid5] 8,16 0 6639 2.453620460 2579 G W 7493144 + 8 [md0_raid5] 8,16 0 6640 2.453639311 2579 Q W 7493120 + 8 [md0_raid5] 8,16 0 6641 2.453639842 2579 G W 7493120 + 8 [md0_raid5] The bio(7493144) first and bio(7493120) later.So the subsequent bios will be divided into two parts. When flushing plug-list,because elv_attempt_insert_merge only support backmerge,not supporting frontmerge. So rq[7493120 + 24] can't merge with rq[7493144 + 104]. From my test,i found those situation can count 25% in our system. Using this patch, there is no this situation. Signed-off-by: Jianpeng Ma CC:Shaohua Li Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index a33870b..3c95c4d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2868,7 +2868,8 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b) struct request *rqa = container_of(a, struct request, queuelist); struct request *rqb = container_of(b, struct request, queuelist); - return !(rqa->q <= rqb->q); + return !(rqa->q < rqb->q || + (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb))); } /* -- cgit v0.10.2 From c37b2b6269ee4637fb7cdb5da0d1e47215d57ce2 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 22 Oct 2012 15:51:44 -0400 Subject: Btrfs: do not bug when we fail to commit the transaction We BUG if we fail to commit the transaction when creating a snapshot, which is just obnoxious. Remove the BUG_ON(). Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index da518de..84bb4de 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -571,7 +571,8 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, ret = btrfs_commit_transaction(trans, root->fs_info->extent_root); } - BUG_ON(ret); + if (ret) + goto fail; ret = pending_snapshot->error; if (ret) -- cgit v0.10.2 From 43a09f7fb01fa1e091416a2aa49b6c666458c1ee Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 16 Oct 2012 13:17:43 -0700 Subject: xhci: Fix potential NULL ptr deref in command cancellation. The command cancellation code doesn't check whether find_trb_seg() couldn't find the segment that contains the TRB to be canceled. This could cause a NULL pointer deference later in the function when next_trb is called. It's unlikely to happen unless something is wrong with the command ring pointers, so add some debugging in case it happens. This patch should be backported to stable kernels as old as 3.0, that contain the commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d "xHCI: handle command after aborting the command ring". Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c6ebb17..4e1a894 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1228,6 +1228,17 @@ static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, xhci->cmd_ring->dequeue, &cycle_state); + if (!cur_seg) { + xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n", + xhci->cmd_ring->dequeue, + (unsigned long long) + xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, + xhci->cmd_ring->dequeue)); + xhci_debug_ring(xhci, xhci->cmd_ring); + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); + return; + } + /* find the command trb matched by cd from command ring */ for (cmd_trb = xhci->cmd_ring->dequeue; cmd_trb != xhci->cmd_ring->enqueue; -- cgit v0.10.2 From b80313422a1551cc1d4f3e2d532fe633154ae5dd Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 16 Oct 2012 13:26:22 -0700 Subject: xhci: Fix missing break in xhci_evaluate_context_result. Coverity complains that xhci_evaluate_context_result() is missing a break statement after the COMP_EBADSLT switch case. It's not a big deal, since we wanted to return the same error code as the case statement below it does. The end result would be one that a Slot Disabled error completion code would also print the warning message associated with a Context State error code. No other bad behavior would result. It's not worth backporting to stable kernels, since it only fixes an issue with too much debugging. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9ec9396..ffe2e2e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1817,6 +1817,8 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, case COMP_EBADSLT: dev_warn(&udev->dev, "WARN: slot not enabled for" "evaluate context command.\n"); + ret = -EINVAL; + break; case COMP_CTX_STATE: dev_warn(&udev->dev, "WARN: invalid context state for " "evaluate context command.\n"); -- cgit v0.10.2 From 7e5f77f9bc30cb5338802df184b26d1365afca09 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 16 Oct 2012 13:33:45 -0700 Subject: xhci: trivial: Remove assigned but unused slot_ctx. Remove the variable slot_ctx from xhci_dbg_ctx(), since it is assigned but unused. Caught by Coverity. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 4b436f5..5f3a7c7 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -544,7 +544,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, int i; /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; - struct xhci_slot_ctx *slot_ctx; dma_addr_t dma = ctx->dma; int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); @@ -570,7 +569,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma); } - slot_ctx = xhci_get_slot_ctx(xhci, ctx); xhci_dbg_slot_ctx(xhci, ctx); xhci_dbg_ep_ctx(xhci, ctx, last_ep); } -- cgit v0.10.2 From df0379065b3850cd42447b59578a2f9362047487 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 16 Oct 2012 13:33:45 -0700 Subject: xhci: trivial: Remove assigned but unused ep_ctx. Remove the variable ep_ctx from xhci_add_endpoint(), since it is assigned but unused. Caught by Coverity. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ffe2e2e..c9e419f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1627,7 +1627,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_hcd *xhci; struct xhci_container_ctx *in_ctx, *out_ctx; unsigned int ep_index; - struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u32 added_ctxs; @@ -1663,7 +1662,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, out_ctx = virt_dev->out_ctx; ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); /* If this endpoint is already in use, and the upper layers are trying * to add it again without dropping it, reject the addition. -- cgit v0.10.2 From b40a79591ca918e7b91b0d9b6abd5d00f2e88c19 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 25 Oct 2012 22:28:12 +0200 Subject: freezer: exec should clear PF_NOFREEZE along with PF_KTHREAD flush_old_exec() clears PF_KTHREAD but forgets about PF_NOFREEZE. Signed-off-by: Oleg Nesterov Acked-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/fs/exec.c b/fs/exec.c index 8b9011b..0039055 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1083,7 +1083,8 @@ int flush_old_exec(struct linux_binprm * bprm) bprm->mm = NULL; /* We're using it now */ set_fs(USER_DS); - current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD); + current->flags &= + ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD | PF_NOFREEZE); flush_thread(); current->personality &= ~bprm->per_clear; -- cgit v0.10.2 From ef5d437f71afdf4afdbab99213add99f4b1318fd Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 25 Oct 2012 13:37:31 -0700 Subject: mm: fix XFS oops due to dirty pages without buffers on s390 On s390 any write to a page (even from kernel itself) sets architecture specific page dirty bit. Thus when a page is written to via buffered write, HW dirty bit gets set and when we later map and unmap the page, page_remove_rmap() finds the dirty bit and calls set_page_dirty(). Dirtying of a page which shouldn't be dirty can cause all sorts of problems to filesystems. The bug we observed in practice is that buffers from the page get freed, so when the page gets later marked as dirty and writeback writes it, XFS crashes due to an assertion BUG_ON(!PagePrivate(page)) in page_buffers() called from xfs_count_page_state(). Similar problem can also happen when zero_user_segment() call from xfs_vm_writepage() (or block_write_full_page() for that matter) set the hardware dirty bit during writeback, later buffers get freed, and then page unmapped. Fix the issue by ignoring s390 HW dirty bit for page cache pages of mappings with mapping_cap_account_dirty(). This is safe because for such mappings when a page gets marked as writeable in PTE it is also marked dirty in do_wp_page() or do_page_fault(). When the dirty bit is cleared by clear_page_dirty_for_io(), the page gets writeprotected in page_mkclean(). So pagecache page is writeable if and only if it is dirty. Thanks to Hugh Dickins for pointing out mapping has to have mapping_cap_account_dirty() for things to work and proposing a cleaned up variant of the patch. The patch has survived about two hours of running fsx-linux on tmpfs while heavily swapping and several days of running on out build machines where the original problem was triggered. Signed-off-by: Jan Kara Cc: Martin Schwidefsky Cc: Mel Gorman Cc: Hugh Dickins Cc: Heiko Carstens Cc: [3.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index 7df7984..2ee1ef0 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -56,6 +56,7 @@ #include #include #include +#include #include @@ -926,11 +927,8 @@ int page_mkclean(struct page *page) if (page_mapped(page)) { struct address_space *mapping = page_mapping(page); - if (mapping) { + if (mapping) ret = page_mkclean_file(mapping, page); - if (page_test_and_clear_dirty(page_to_pfn(page), 1)) - ret = 1; - } } return ret; @@ -1116,6 +1114,7 @@ void page_add_file_rmap(struct page *page) */ void page_remove_rmap(struct page *page) { + struct address_space *mapping = page_mapping(page); bool anon = PageAnon(page); bool locked; unsigned long flags; @@ -1138,8 +1137,19 @@ void page_remove_rmap(struct page *page) * this if the page is anon, so about to be freed; but perhaps * not if it's in swapcache - there might be another pte slot * containing the swap entry, but page not yet written to swap. + * + * And we can skip it on file pages, so long as the filesystem + * participates in dirty tracking; but need to catch shm and tmpfs + * and ramfs pages which have been modified since creation by read + * fault. + * + * Note that mapping must be decided above, before decrementing + * mapcount (which luckily provides a barrier): once page is unmapped, + * it could be truncated and page->mapping reset to NULL at any moment. + * Note also that we are relying on page_mapping(page) to set mapping + * to &swapper_space when PageSwapCache(page). */ - if ((!anon || PageSwapCache(page)) && + if (mapping && !mapping_cap_account_dirty(mapping) && page_test_and_clear_dirty(page_to_pfn(page), 1)) set_page_dirty(page); /* -- cgit v0.10.2 From 8c9506d16925f1b1314d93af383ca3134eb534d8 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 25 Oct 2012 13:37:34 -0700 Subject: cgroup: fix invalid rcu dereference Commit ad676077a2ae ("device_cgroup: convert device_cgroup internally to policy + exceptions") removed rcu locks which are needed in task_devcgroup called in this chain: devcgroup_inode_mknod OR __devcgroup_inode_permission -> __devcgroup_inode_permission -> task_devcgroup -> task_subsys_state -> task_subsys_state_check. Change the code so that task_devcgroup is safely called with rcu read lock held. =============================== [ INFO: suspicious RCU usage. ] 3.6.0-rc5-next-20120913+ #42 Not tainted ------------------------------- include/linux/cgroup.h:553 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by kdevtmpfs/23: #0: (sb_writers){.+.+.+}, at: [] mnt_want_write+0x1f/0x50 #1: (&sb->s_type->i_mutex_key#3/1){+.+.+.}, at: [] kern_path_create+0x7f/0x170 stack backtrace: Pid: 23, comm: kdevtmpfs Not tainted 3.6.0-rc5-next-20120913+ #42 Call Trace: lockdep_rcu_suspicious+0xfd/0x130 devcgroup_inode_mknod+0x19d/0x240 vfs_mknod+0x71/0xf0 handle_create.isra.2+0x72/0x200 devtmpfsd+0x114/0x140 ? handle_create.isra.2+0x200/0x200 kthread+0xd6/0xe0 kernel_thread_helper+0x4/0x10 Signed-off-by: Jiri Slaby Cc: Dave Jones Cc: Tejun Heo Cc: Li Zefan Cc: James Morris Cc: Pavel Emelyanov Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 44dfc41..46d01fc 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -533,10 +533,10 @@ struct cgroup_subsys devices_subsys = { * * returns 0 on success, -EPERM case the operation is not permitted */ -static int __devcgroup_check_permission(struct dev_cgroup *dev_cgroup, - short type, u32 major, u32 minor, +static int __devcgroup_check_permission(short type, u32 major, u32 minor, short access) { + struct dev_cgroup *dev_cgroup; struct dev_exception_item ex; int rc; @@ -547,6 +547,7 @@ static int __devcgroup_check_permission(struct dev_cgroup *dev_cgroup, ex.access = access; rcu_read_lock(); + dev_cgroup = task_devcgroup(current); rc = may_access(dev_cgroup, &ex); rcu_read_unlock(); @@ -558,7 +559,6 @@ static int __devcgroup_check_permission(struct dev_cgroup *dev_cgroup, int __devcgroup_inode_permission(struct inode *inode, int mask) { - struct dev_cgroup *dev_cgroup = task_devcgroup(current); short type, access = 0; if (S_ISBLK(inode->i_mode)) @@ -570,13 +570,12 @@ int __devcgroup_inode_permission(struct inode *inode, int mask) if (mask & MAY_READ) access |= ACC_READ; - return __devcgroup_check_permission(dev_cgroup, type, imajor(inode), - iminor(inode), access); + return __devcgroup_check_permission(type, imajor(inode), iminor(inode), + access); } int devcgroup_inode_mknod(int mode, dev_t dev) { - struct dev_cgroup *dev_cgroup = task_devcgroup(current); short type; if (!S_ISBLK(mode) && !S_ISCHR(mode)) @@ -587,7 +586,7 @@ int devcgroup_inode_mknod(int mode, dev_t dev) else type = DEV_CHAR; - return __devcgroup_check_permission(dev_cgroup, type, MAJOR(dev), - MINOR(dev), ACC_MKNOD); + return __devcgroup_check_permission(type, MAJOR(dev), MINOR(dev), + ACC_MKNOD); } -- cgit v0.10.2 From 5b7aa7d5bb2c5cf7fc05aaa41561af321706ab5f Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 25 Oct 2012 13:37:38 -0700 Subject: device_cgroup: rename deny_all to behavior This was done in a v2 patch but v1 ended up being committed. The variable name is less confusing and stores the default behavior when no matching exception exists. Signed-off-by: Aristeu Rozanski Cc: Dave Jones Cc: Tejun Heo Cc: Li Zefan Cc: James Morris Cc: Pavel Emelyanov Acked-by: Serge Hallyn Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 46d01fc..76503df 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -42,7 +42,10 @@ struct dev_exception_item { struct dev_cgroup { struct cgroup_subsys_state css; struct list_head exceptions; - bool deny_all; + enum { + DEVCG_DEFAULT_ALLOW, + DEVCG_DEFAULT_DENY, + } behavior; }; static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s) @@ -182,13 +185,13 @@ static struct cgroup_subsys_state *devcgroup_create(struct cgroup *cgroup) parent_cgroup = cgroup->parent; if (parent_cgroup == NULL) - dev_cgroup->deny_all = false; + dev_cgroup->behavior = DEVCG_DEFAULT_ALLOW; else { parent_dev_cgroup = cgroup_to_devcgroup(parent_cgroup); mutex_lock(&devcgroup_mutex); ret = dev_exceptions_copy(&dev_cgroup->exceptions, &parent_dev_cgroup->exceptions); - dev_cgroup->deny_all = parent_dev_cgroup->deny_all; + dev_cgroup->behavior = parent_dev_cgroup->behavior; mutex_unlock(&devcgroup_mutex); if (ret) { kfree(dev_cgroup); @@ -260,7 +263,7 @@ static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft, * - List the exceptions in case the default policy is to deny * This way, the file remains as a "whitelist of devices" */ - if (devcgroup->deny_all == false) { + if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) { set_access(acc, ACC_MASK); set_majmin(maj, ~0); set_majmin(min, ~0); @@ -314,12 +317,12 @@ static int may_access(struct dev_cgroup *dev_cgroup, * In two cases we'll consider this new exception valid: * - the dev cgroup has its default policy to allow + exception list: * the new exception should *not* match any of the exceptions - * (!deny_all, !match) + * (behavior == DEVCG_DEFAULT_ALLOW, !match) * - the dev cgroup has its default policy to deny + exception list: * the new exception *should* match the exceptions - * (deny_all, match) + * (behavior == DEVCG_DEFAULT_DENY, match) */ - if (dev_cgroup->deny_all == match) + if ((dev_cgroup->behavior == DEVCG_DEFAULT_DENY) == match) return 1; return 0; } @@ -375,11 +378,11 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, if (!parent_has_perm(devcgroup, &ex)) return -EPERM; dev_exception_clean(devcgroup); - devcgroup->deny_all = false; + devcgroup->behavior = DEVCG_DEFAULT_ALLOW; break; case DEVCG_DENY: dev_exception_clean(devcgroup); - devcgroup->deny_all = true; + devcgroup->behavior = DEVCG_DEFAULT_DENY; break; default: return -EINVAL; @@ -452,7 +455,7 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, * an matching exception instead. And be silent about it: we * don't want to break compatibility */ - if (devcgroup->deny_all == false) { + if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) { dev_exception_rm(devcgroup, &ex); return 0; } @@ -463,7 +466,7 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, * an matching exception instead. And be silent about it: we * don't want to break compatibility */ - if (devcgroup->deny_all == true) { + if (devcgroup->behavior == DEVCG_DEFAULT_DENY) { dev_exception_rm(devcgroup, &ex); return 0; } -- cgit v0.10.2 From 26fd8405dd470cb8b54cb96859b7dd437e5e1391 Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 25 Oct 2012 13:37:41 -0700 Subject: device_cgroup: stop using simple_strtoul() Convert the code to use kstrtou32() instead of simple_strtoul() which is deprecated. The real size of the variables are u32, so use kstrtou32 instead of kstrtoul Signed-off-by: Aristeu Rozanski Cc: Dave Jones Cc: Tejun Heo Cc: Li Zefan Cc: James Morris Cc: Pavel Emelyanov Acked-by: Serge Hallyn Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 76503df..4fbae8d 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -361,8 +361,8 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, int filetype, const char *buffer) { const char *b; - char *endp; - int count; + char temp[12]; /* 11 + 1 characters needed for a u32 */ + int count, rc; struct dev_exception_item ex; if (!capable(CAP_SYS_ADMIN)) @@ -405,8 +405,16 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, ex.major = ~0; b++; } else if (isdigit(*b)) { - ex.major = simple_strtoul(b, &endp, 10); - b = endp; + memset(temp, 0, sizeof(temp)); + for (count = 0; count < sizeof(temp) - 1; count++) { + temp[count] = *b; + b++; + if (!isdigit(*b)) + break; + } + rc = kstrtou32(temp, 10, &ex.major); + if (rc) + return -EINVAL; } else { return -EINVAL; } @@ -419,8 +427,16 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, ex.minor = ~0; b++; } else if (isdigit(*b)) { - ex.minor = simple_strtoul(b, &endp, 10); - b = endp; + memset(temp, 0, sizeof(temp)); + for (count = 0; count < sizeof(temp) - 1; count++) { + temp[count] = *b; + b++; + if (!isdigit(*b)) + break; + } + rc = kstrtou32(temp, 10, &ex.minor); + if (rc) + return -EINVAL; } else { return -EINVAL; } -- cgit v0.10.2 From 4cef7299b4786879a3e113e84084a72b24590c5b Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 25 Oct 2012 13:37:45 -0700 Subject: device_cgroup: add proper checking when changing default behavior Before changing a group's default behavior to ALLOW, we must check if its parent's behavior is also ALLOW. Signed-off-by: Aristeu Rozanski Cc: Tejun Heo Cc: Li Zefan Cc: James Morris Cc: Pavel Emelyanov Acked-by: Serge Hallyn Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 4fbae8d..842c254 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -344,6 +344,17 @@ static int parent_has_perm(struct dev_cgroup *childcg, return may_access(parent, ex); } +/** + * may_allow_all - checks if it's possible to change the behavior to + * allow based on parent's rules. + * @parent: device cgroup's parent + * returns: != 0 in case it's allowed, 0 otherwise + */ +static inline int may_allow_all(struct dev_cgroup *parent) +{ + return parent->behavior == DEVCG_DEFAULT_ALLOW; +} + /* * Modify the exception list using allow/deny rules. * CAP_SYS_ADMIN is needed for this. It's at least separate from CAP_MKNOD @@ -364,6 +375,8 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, char temp[12]; /* 11 + 1 characters needed for a u32 */ int count, rc; struct dev_exception_item ex; + struct cgroup *p = devcgroup->css.cgroup; + struct dev_cgroup *parent = cgroup_to_devcgroup(p->parent); if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -375,9 +388,13 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, case 'a': switch (filetype) { case DEVCG_ALLOW: - if (!parent_has_perm(devcgroup, &ex)) + if (!may_allow_all(parent)) return -EPERM; dev_exception_clean(devcgroup); + rc = dev_exceptions_copy(&devcgroup->exceptions, + &parent->exceptions); + if (rc) + return rc; devcgroup->behavior = DEVCG_DEFAULT_ALLOW; break; case DEVCG_DENY: -- cgit v0.10.2 From fd6de5300e6fcad5621ef7e78eb227de9d4c8b79 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 25 Oct 2012 13:37:48 -0700 Subject: backlight: ili9320: add missing SPI dependency Add this missing SPI dependency and prevent the driver from building without SPI, because functions of the spi driver are used in this driver. drivers/video/backlight/ili9320.c:51: undefined reference to `spi_sync' Also, a prompt string for CONFIG_LCD_ILI9320 is added for explicit selection. Signed-off-by: Jingoo Han Cc: Richard Purdie Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c101697..765a945 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -60,7 +60,8 @@ config LCD_LTV350QV The LTV350QV panel is present on all ATSTK1000 boards. config LCD_ILI9320 - tristate + tristate "ILI Technology ILI9320 controller support" + depends on SPI help If you have a panel based on the ILI9320 controller chip then say y to include a power driver for it. -- cgit v0.10.2 From eedce141cd2dad8d0cefc5468ef41898949a7031 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 25 Oct 2012 13:37:51 -0700 Subject: genalloc: stop crashing the system when destroying a pool The genalloc code uses the bitmap API from include/linux/bitmap.h and lib/bitmap.c, which is based on long values. Both bitmap_set from lib/bitmap.c and bitmap_set_ll, which is the lockless version from genalloc.c, use BITMAP_LAST_WORD_MASK to set the first bits in a long in the bitmap. That one uses (1 << bits) - 1, 0b111, if you are setting the first three bits. This means that the API counts from the least significant bits (LSB from now on) to the MSB. The LSB in the first long is bit 0, then. The same works for the lookup functions. The genalloc code uses longs for the bitmap, as it should. In include/linux/genalloc.h, struct gen_pool_chunk has unsigned long bits[0] as its last member. When allocating the struct, genalloc should reserve enough space for the bitmap. This should be a proper number of longs that can fit the amount of bits in the bitmap. However, genalloc allocates an integer number of bytes that fit the amount of bits, but may not be an integer amount of longs. 9 bytes, for example, could be allocated for 70 bits. This is a problem in itself if the Least Significat Bit in a long is in the byte with the largest address, which happens in Big Endian machines. This means genalloc is not allocating the byte in which it will try to set or check for a bit. This may end up in memory corruption, where genalloc will try to set the bits it has not allocated. In fact, genalloc may not set these bits because it may find them already set, because they were not zeroed since they were not allocated. And that's what causes a BUG when gen_pool_destroy is called and check for any set bits. What really happens is that genalloc uses kmalloc_node with __GFP_ZERO on gen_pool_add_virt. With SLAB and SLUB, this means the whole slab will be cleared, not only the requested bytes. Since struct gen_pool_chunk has a size that is a multiple of 8, and slab sizes are multiples of 8, we get lucky and allocate and clear the right amount of bytes. Hower, this is not the case with SLOB or with older code that did memset after allocating instead of using __GFP_ZERO. So, a simple module as this (running 3.6.0), will cause a crash when rmmod'ed. [root@phantom-lp2 foo]# cat foo.c #include #include #include #include MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); static struct gen_pool *foo_pool; static __init int foo_init(void) { int ret; foo_pool = gen_pool_create(10, -1); if (!foo_pool) return -ENOMEM; ret = gen_pool_add(foo_pool, 0xa0000000, 32 << 10, -1); if (ret) { gen_pool_destroy(foo_pool); return ret; } return 0; } static __exit void foo_exit(void) { gen_pool_destroy(foo_pool); } module_init(foo_init); module_exit(foo_exit); [root@phantom-lp2 foo]# zcat /proc/config.gz | grep SLOB CONFIG_SLOB=y [root@phantom-lp2 foo]# insmod ./foo.ko [root@phantom-lp2 foo]# rmmod foo ------------[ cut here ]------------ kernel BUG at lib/genalloc.c:243! cpu 0x4: Vector: 700 (Program Check) at [c0000000bb0e7960] pc: c0000000003cb50c: .gen_pool_destroy+0xac/0x110 lr: c0000000003cb4fc: .gen_pool_destroy+0x9c/0x110 sp: c0000000bb0e7be0 msr: 8000000000029032 current = 0xc0000000bb0e0000 paca = 0xc000000006d30e00 softe: 0 irq_happened: 0x01 pid = 13044, comm = rmmod kernel BUG at lib/genalloc.c:243! [c0000000bb0e7ca0] d000000004b00020 .foo_exit+0x20/0x38 [foo] [c0000000bb0e7d20] c0000000000dff98 .SyS_delete_module+0x1a8/0x290 [c0000000bb0e7e30] c0000000000097d4 syscall_exit+0x0/0x94 --- Exception: c00 (System Call) at 000000800753d1a0 SP (fffd0b0e640) is in userspace Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Paul Gortmaker Cc: Benjamin Gaignard Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/genalloc.c b/lib/genalloc.c index ca208a9..5492043 100644 --- a/lib/genalloc.c +++ b/lib/genalloc.c @@ -178,7 +178,7 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy struct gen_pool_chunk *chunk; int nbits = size >> pool->min_alloc_order; int nbytes = sizeof(struct gen_pool_chunk) + - (nbits + BITS_PER_BYTE - 1) / BITS_PER_BYTE; + BITS_TO_LONGS(nbits) * sizeof(long); chunk = kmalloc_node(nbytes, GFP_KERNEL | __GFP_ZERO, nid); if (unlikely(chunk == NULL)) -- cgit v0.10.2 From 29fc7c5a4f516d388fb6e1f6d24bfb04b8093e54 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 25 Oct 2012 13:37:53 -0700 Subject: rbtree: include linux/compiler.h for definition of __always_inline rb_erase_augmented() is a static function annotated with __always_inline. This causes a compile failure when attempting to use the rbtree implementation as a library (e.g. kvm tool): rbtree_augmented.h:125:24: error: expected `=', `,', `;', `asm' or `__attribute__' before `void' Include linux/compiler.h in rbtree_augmented.h so that the __always_inline macro is resolved correctly. Signed-off-by: Will Deacon Cc: Pekka Enberg Reviewed-by: Michel Lespinasse Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h index 214caa3..2ac60c9 100644 --- a/include/linux/rbtree_augmented.h +++ b/include/linux/rbtree_augmented.h @@ -24,6 +24,7 @@ #ifndef _LINUX_RBTREE_AUGMENTED_H #define _LINUX_RBTREE_AUGMENTED_H +#include #include /* -- cgit v0.10.2 From 86a595f961360c9c31d00fb111dd09e5d5ba9a40 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Thu, 25 Oct 2012 13:37:56 -0700 Subject: mm/page_alloc.c:alloc_contig_range(): return early for err path If start_isolate_page_range() failed, unset_migratetype_isolate() has been done inside it. Signed-off-by: Bob Liu Cc: Ni zhan Chen Cc: Marek Szyprowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bb90971..b0012ab 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5825,7 +5825,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, ret = start_isolate_page_range(pfn_max_align_down(start), pfn_max_align_up(end), migratetype); if (ret) - goto done; + return ret; ret = __alloc_contig_migrate_range(&cc, start, end); if (ret) -- cgit v0.10.2 From 59ce8764bdfe8f3c6c02d3215741584dbb43409d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 25 Oct 2012 13:37:57 -0700 Subject: UAPI: fix tools/vm/page-types.c Fix tools/vm/page-types.c to use the UAPI variant of linux/kernel-page-flags.h lest the following error appear: In file included from page-types.c:38:0: ../../include/linux/kernel-page-flags.h:4:42: fatal error: uapi/linux/kernel-page-flags.h: No such file or directory Reported-by: Daniel Hazelton Signed-off-by: David Howells Reviewed-by: Fengguang Wu Tested-by: Daniel Hazelton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c index cd1b03e..b76edf2 100644 --- a/tools/vm/page-types.c +++ b/tools/vm/page-types.c @@ -35,7 +35,7 @@ #include #include #include "../../include/uapi/linux/magic.h" -#include "../../include/linux/kernel-page-flags.h" +#include "../../include/uapi/linux/kernel-page-flags.h" #ifndef MAX_PATH -- cgit v0.10.2 From fc314d0a4a933603f521de343634910a4ed9b37b Mon Sep 17 00:00:00 2001 From: Daniel Hazelton Date: Thu, 25 Oct 2012 13:37:59 -0700 Subject: tools/testing/selftests/epoll/test_epoll.c: fix build Latest Linus head run of "make selftests" in the tools directory failed with references to undefined variables. Reference was to 'write_thread_data' which is the name of a struct that is being used, not the variable itself. Change reference so it points to the variable. Signed-off-by: Daniel Hazelton Cc: "Paton J. Lewis" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/tools/testing/selftests/epoll/test_epoll.c b/tools/testing/selftests/epoll/test_epoll.c index e0fcff1e..f752539 100644 --- a/tools/testing/selftests/epoll/test_epoll.c +++ b/tools/testing/selftests/epoll/test_epoll.c @@ -162,14 +162,14 @@ void *write_thread_function(void *function_data) int index; struct write_thread_data *thread_data = (struct write_thread_data *)function_data; - while (!write_thread_data->stop) + while (!thread_data->stop) for (index = 0; !thread_data->stop && (index < thread_data->n_fds); ++index) if ((write(thread_data->fds[index], &data, 1) < 1) && (errno != EAGAIN) && (errno != EWOULDBLOCK)) { - write_thread_data->status = errno; + thread_data->status = errno; return; } } -- cgit v0.10.2 From 35cfa2b0b491c37e23527822bf365610dbb188e5 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 25 Oct 2012 13:38:01 -0700 Subject: mm/mmu_notifier: allocate mmu_notifier in advance While allocating mmu_notifier with parameter GFP_KERNEL, swap would start to work in case of tight available memory. Eventually, that would lead to a deadlock while the swap deamon swaps anonymous pages. It was caused by commit e0f3c3f78da29b ("mm/mmu_notifier: init notifier if necessary"). ================================= [ INFO: inconsistent lock state ] 3.7.0-rc1+ #518 Not tainted --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/35 [HC0[0]:SC0[0]:HE1:SE1] takes: (&mapping->i_mmap_mutex){+.+.?.}, at: page_referenced+0x9c/0x2e0 {RECLAIM_FS-ON-W} state was registered at: mark_held_locks+0x86/0x150 lockdep_trace_alloc+0x67/0xc0 kmem_cache_alloc_trace+0x33/0x230 do_mmu_notifier_register+0x87/0x180 mmu_notifier_register+0x13/0x20 kvm_dev_ioctl+0x428/0x510 do_vfs_ioctl+0x98/0x570 sys_ioctl+0x91/0xb0 system_call_fastpath+0x16/0x1b irq event stamp: 825 hardirqs last enabled at (825): _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (824): _raw_spin_lock_irq+0x19/0x80 softirqs last enabled at (0): copy_process+0x630/0x17c0 softirqs last disabled at (0): (null) ... Simply back out the above commit, which was a small performance optimization. Signed-off-by: Gavin Shan Reported-by: Andrea Righi Tested-by: Andrea Righi Cc: Wanpeng Li Cc: Andrea Arcangeli Cc: Avi Kivity Cc: Hugh Dickins Cc: Marcelo Tosatti Cc: Xiao Guangrong Cc: Sagi Grimberg Cc: Haggai Eran Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c index 479a1e7..8a5ac8c 100644 --- a/mm/mmu_notifier.c +++ b/mm/mmu_notifier.c @@ -196,28 +196,28 @@ static int do_mmu_notifier_register(struct mmu_notifier *mn, BUG_ON(atomic_read(&mm->mm_users) <= 0); /* - * Verify that mmu_notifier_init() already run and the global srcu is - * initialized. - */ + * Verify that mmu_notifier_init() already run and the global srcu is + * initialized. + */ BUG_ON(!srcu.per_cpu_ref); + ret = -ENOMEM; + mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL); + if (unlikely(!mmu_notifier_mm)) + goto out; + if (take_mmap_sem) down_write(&mm->mmap_sem); ret = mm_take_all_locks(mm); if (unlikely(ret)) - goto out; + goto out_clean; if (!mm_has_notifiers(mm)) { - mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), - GFP_KERNEL); - if (unlikely(!mmu_notifier_mm)) { - ret = -ENOMEM; - goto out_of_mem; - } INIT_HLIST_HEAD(&mmu_notifier_mm->list); spin_lock_init(&mmu_notifier_mm->lock); mm->mmu_notifier_mm = mmu_notifier_mm; + mmu_notifier_mm = NULL; } atomic_inc(&mm->mm_count); @@ -233,12 +233,12 @@ static int do_mmu_notifier_register(struct mmu_notifier *mn, hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list); spin_unlock(&mm->mmu_notifier_mm->lock); -out_of_mem: mm_drop_all_locks(mm); -out: +out_clean: if (take_mmap_sem) up_write(&mm->mmap_sem); - + kfree(mmu_notifier_mm); +out: BUG_ON(atomic_read(&mm->mm_users) <= 0); return ret; } -- cgit v0.10.2 From d5ea7b5ec1ee4dac868143806c0bd94855754677 Mon Sep 17 00:00:00 2001 From: Hein Tibosch Date: Thu, 25 Oct 2012 13:38:05 -0700 Subject: drivers/dma/dw_dmac: make driver's endianness configurable The dw_dmac driver was originally developed for avr32 to be used with the Synopsys DesignWare AHB DMA controller. Starting from 2.6.38, access to the device's i/o memory was done with the little-endian readl/writel functions(1) This broke the driver for the avr32 platform, because it needs big (native) endian accessors. This patch makes the endianness configurable using 'DW_DMAC_BIG_ENDIAN_IO', which will default be true for AVR32 I submitted this patch before(2) but then waited for Andy to finish other changes to the same module(3). (1) https://patchwork.kernel.org/patch/608211 (2) https://lkml.org/lkml/2012/8/26/148 (3) https://lkml.org/lkml/2012/9/21/173 Signed-off-by: Hein Tibosch Acked-by: Arnd Bergmann Cc: Andy Shevchenko Acked-by: Viresh Kumar Cc: Hans-Christian Egtvedt Cc: Ludovic Desroches Cc: Havard Skinnemoen Cc: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 677cd6e..d4c1218 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -90,6 +90,17 @@ config DW_DMAC Support the Synopsys DesignWare AHB DMA controller. This can be integrated in chips such as the Atmel AT32ap7000. +config DW_DMAC_BIG_ENDIAN_IO + bool "Use big endian I/O register access" + default y if AVR32 + depends on DW_DMAC + help + Say yes here to use big endian I/O access when reading and writing + to the DMA controller registers. This is needed on some platforms, + like the Atmel AVR32 architecture. + + If unsure, use the default setting. + config AT_HDMAC tristate "Atmel AHB DMA support" depends on ARCH_AT91 diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index ff39fa6..8896559 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -98,9 +98,17 @@ struct dw_dma_regs { u32 DW_PARAMS; }; +#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO +#define dma_readl_native ioread32be +#define dma_writel_native iowrite32be +#else +#define dma_readl_native readl +#define dma_writel_native writel +#endif + /* To access the registers in early stage of probe */ #define dma_read_byaddr(addr, name) \ - readl((addr) + offsetof(struct dw_dma_regs, name)) + dma_readl_native((addr) + offsetof(struct dw_dma_regs, name)) /* Bitfields in DW_PARAMS */ #define DW_PARAMS_NR_CHAN 8 /* number of channels */ @@ -216,9 +224,9 @@ __dwc_regs(struct dw_dma_chan *dwc) } #define channel_readl(dwc, name) \ - readl(&(__dwc_regs(dwc)->name)) + dma_readl_native(&(__dwc_regs(dwc)->name)) #define channel_writel(dwc, name, val) \ - writel((val), &(__dwc_regs(dwc)->name)) + dma_writel_native((val), &(__dwc_regs(dwc)->name)) static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan) { @@ -246,9 +254,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw) } #define dma_readl(dw, name) \ - readl(&(__dw_regs(dw)->name)) + dma_readl_native(&(__dw_regs(dw)->name)) #define dma_writel(dw, name, val) \ - writel((val), &(__dw_regs(dw)->name)) + dma_writel_native((val), &(__dw_regs(dw)->name)) #define channel_set_bit(dw, reg, mask) \ dma_writel(dw, reg, ((mask) << 8) | (mask)) -- cgit v0.10.2 From f2302505775fd13ba93f034206f1e2a587017929 Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Thu, 25 Oct 2012 13:38:07 -0700 Subject: pidns: limit the nesting depth of pid namespaces 'struct pid' is a "variable sized struct" - a header with an array of upids at the end. The size of the array depends on a level (depth) of pid namespaces. Now a level of pidns is not limited, so 'struct pid' can be more than one page. Looks reasonable, that it should be less than a page. MAX_PIS_NS_LEVEL is not calculated from PAGE_SIZE, because in this case it depends on architectures, config options and it will be reduced, if someone adds a new fields in struct pid or struct upid. I suggest to set MAX_PIS_NS_LEVEL = 32, because it saves ability to expand "struct pid" and it's more than enough for all known for me use-cases. When someone finds a reasonable use case, we can add a config option or a sysctl parameter. In addition it will reduce the effect of another problem, when we have many nested namespaces and the oldest one starts dying. zap_pid_ns_processe will be called for each namespace and find_vpid will be called for each process in a namespace. find_vpid will be called minimum max_level^2 / 2 times. The reason of that is that when we found a bit in pidmap, we can't determine this pidns is top for this process or it isn't. vpid is a heavy operation, so a fork bomb, which create many nested namespace, can make a system inaccessible for a long time. For example my system becomes inaccessible for a few minutes with 4000 processes. [akpm@linux-foundation.org: return -EINVAL in response to excessive nesting, not -ENOMEM] Signed-off-by: Andrew Vagin Acked-by: Oleg Nesterov Cc: Cyrill Gorcunov Cc: "Eric W. Biederman" Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index eb00be2..7b07cc0 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -71,12 +71,22 @@ err_alloc: return NULL; } +/* MAX_PID_NS_LEVEL is needed for limiting size of 'struct pid' */ +#define MAX_PID_NS_LEVEL 32 + static struct pid_namespace *create_pid_namespace(struct pid_namespace *parent_pid_ns) { struct pid_namespace *ns; unsigned int level = parent_pid_ns->level + 1; - int i, err = -ENOMEM; + int i; + int err; + + if (level > MAX_PID_NS_LEVEL) { + err = -EINVAL; + goto out; + } + err = -ENOMEM; ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL); if (ns == NULL) goto out; -- cgit v0.10.2 From 6b187d0260b6cd1d0904309f32659b7ed5948af8 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 25 Oct 2012 13:38:08 -0700 Subject: mm, numa: avoid setting zone_reclaim_mode unless a node is sufficiently distant Commit 957f822a0ab9 ("mm, numa: reclaim from all nodes within reclaim distance") caused zone_reclaim_mode to be set for all systems where two nodes are within RECLAIM_DISTANCE of each other. This is the opposite of what we actually want: zone_reclaim_mode should be set if two nodes are sufficiently distant. Signed-off-by: David Rientjes Reported-by: Julian Wollrath Tested-by: Julian Wollrath Cc: Hugh Dickins Cc: Patrik Kullman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b0012ab..5b74de6 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1809,10 +1809,10 @@ static void __paginginit init_zone_allows_reclaim(int nid) int i; for_each_online_node(i) - if (node_distance(nid, i) <= RECLAIM_DISTANCE) { + if (node_distance(nid, i) <= RECLAIM_DISTANCE) node_set(i, NODE_DATA(nid)->reclaim_nodes); + else zone_reclaim_mode = 1; - } } #else /* CONFIG_NUMA */ -- cgit v0.10.2 From fee0de7791f967c2c5f0d43eb7b7261761b45e64 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Thu, 25 Oct 2012 13:38:11 -0700 Subject: drivers/rtc/rtc-imxdi.c: add missing spin lock initialization Signed-off-by: Jan Luebbe Cc: Alessandro Zummo Cc: Roland Stigge Cc: Grant Likely Tested-by: Roland Stigge Cc: Sascha Hauer Cc: Russell King Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index 891cd6c..4eed510 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -392,6 +392,8 @@ static int dryice_rtc_probe(struct platform_device *pdev) if (imxdi->ioaddr == NULL) return -ENOMEM; + spin_lock_init(&imxdi->irq_lock); + imxdi->irq = platform_get_irq(pdev, 0); if (imxdi->irq < 0) return imxdi->irq; -- cgit v0.10.2 From 20f1de659b77364d55d4e7fad2ef657e7730323f Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 25 Oct 2012 13:38:14 -0700 Subject: gen_init_cpio: avoid stack overflow when expanding Fix possible overflow of the buffer used for expanding environment variables when building file list. In the extremely unlikely case of an attacker having control over the environment variables visible to gen_init_cpio, control over the contents of the file gen_init_cpio parses, and gen_init_cpio was built without compiler hardening, the attacker can gain arbitrary execution control via a stack buffer overflow. $ cat usr/crash.list file foo ${BIG}${BIG}${BIG}${BIG}${BIG}${BIG} 0755 0 0 $ BIG=$(perl -e 'print "A" x 4096;') ./usr/gen_init_cpio usr/crash.list *** buffer overflow detected ***: ./usr/gen_init_cpio terminated This also replaces the space-indenting with tabs. Patch based on existing fix extracted from grsecurity. Signed-off-by: Kees Cook Cc: Michal Marek Cc: Brad Spengler Cc: PaX Team Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c index af0f22f..aca6edc 100644 --- a/usr/gen_init_cpio.c +++ b/usr/gen_init_cpio.c @@ -303,7 +303,7 @@ static int cpio_mkfile(const char *name, const char *location, int retval; int rc = -1; int namesize; - int i; + unsigned int i; mode |= S_IFREG; @@ -381,25 +381,28 @@ error: static char *cpio_replace_env(char *new_location) { - char expanded[PATH_MAX + 1]; - char env_var[PATH_MAX + 1]; - char *start; - char *end; - - for (start = NULL; (start = strstr(new_location, "${")); ) { - end = strchr(start, '}'); - if (start < end) { - *env_var = *expanded = '\0'; - strncat(env_var, start + 2, end - start - 2); - strncat(expanded, new_location, start - new_location); - strncat(expanded, getenv(env_var), PATH_MAX); - strncat(expanded, end + 1, PATH_MAX); - strncpy(new_location, expanded, PATH_MAX); - } else - break; - } - - return new_location; + char expanded[PATH_MAX + 1]; + char env_var[PATH_MAX + 1]; + char *start; + char *end; + + for (start = NULL; (start = strstr(new_location, "${")); ) { + end = strchr(start, '}'); + if (start < end) { + *env_var = *expanded = '\0'; + strncat(env_var, start + 2, end - start - 2); + strncat(expanded, new_location, start - new_location); + strncat(expanded, getenv(env_var), + PATH_MAX - strlen(expanded)); + strncat(expanded, end + 1, + PATH_MAX - strlen(expanded)); + strncpy(new_location, expanded, PATH_MAX); + new_location[PATH_MAX] = 0; + } else + break; + } + + return new_location; } -- cgit v0.10.2 From 12176503366885edd542389eed3aaf94be163fdb Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 25 Oct 2012 13:38:16 -0700 Subject: fs/compat_ioctl.c: VIDEO_SET_SPU_PALETTE missing error check The compat ioctl for VIDEO_SET_SPU_PALETTE was missing an error check while converting ioctl arguments. This could lead to leaking kernel stack contents into userspace. Patch extracted from existing fix in grsecurity. Signed-off-by: Kees Cook Cc: David Miller Cc: Brad Spengler Cc: PaX Team Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index f505402..4c6285f 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -210,6 +210,8 @@ static int do_video_set_spu_palette(unsigned int fd, unsigned int cmd, err = get_user(palp, &up->palette); err |= get_user(length, &up->length); + if (err) + return -EFAULT; up_native = compat_alloc_user_space(sizeof(struct video_spu_palette)); err = put_user(compat_ptr(palp), &up_native->palette); -- cgit v0.10.2 From 2f72d4f6a29cf84c40fc05c76020b347b4774393 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 23 Oct 2012 20:17:05 -0700 Subject: xtensa: allow multi-inclusion for uapi/unistd.h Xtensa implements a method that allows to generate a arbitrary output for each system call by defining the __SYSCALL(number, function, num_args). This usually requires to include uapi/unistd.h twice. Instead of removing the guard agains multiple inclusion entirely, allow to include unistd.h again only if __SYSCALL is defined. Note that __SYSCALL gets always undefined at the end of the file. Signed-off-by: Chris Zankel diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 9ef1c31..d9fa52d 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -1,16 +1,8 @@ -/* - * include/asm-xtensa/unistd.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ +#ifndef _XTENSA_UNISTD_H +#define _XTENSA_UNISTD_H #include - /* * "Conditional" syscalls * @@ -37,3 +29,5 @@ #define __IGNORE_mmap /* use mmap2 */ #define __IGNORE_vfork /* use clone */ #define __IGNORE_fadvise64 /* use fadvise64_64 */ + +#endif /* _XTENSA_UNISTD_H */ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 479abae..1fd157f 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -1,14 +1,4 @@ -/* - * include/asm-xtensa/unistd.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2012 Tensilica Inc. - */ - -#ifndef _UAPI_XTENSA_UNISTD_H +#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL) #define _UAPI_XTENSA_UNISTD_H #ifndef __SYSCALL @@ -759,4 +749,6 @@ __SYSCALL(331, sys_kcmp, 5) #define SYS_XTENSA_COUNT 5 /* count */ +#undef __SYSCALL + #endif /* _UAPI_XTENSA_UNISTD_H */ diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index a5c01e7..5702065 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -32,10 +32,8 @@ typedef void (*syscall_t)(void); syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { [0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall, -#undef __SYSCALL #define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol, -#undef __KERNEL_SYSCALLS__ -#include +#include }; asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) @@ -49,7 +47,8 @@ asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) return (long)ret; } -asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len) +asmlinkage long xtensa_fadvise64_64(int fd, int advice, + unsigned long long offset, unsigned long long len) { return sys_fadvise64_64(fd, offset, len, advice); } -- cgit v0.10.2 From cddfcbcd05851a3b720055d40fc61c63ea1c2bd1 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 23 Oct 2012 20:25:37 -0700 Subject: xtensa: use physical addresses for bus addresses Define virt_to_bus and bus_to_virt as virt_to_phys, and phys_to_virt, respectively. Signed-off-by: Chris Zankel diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index e6be5b9..700c2e6 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -62,6 +62,10 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size) static inline void iounmap(volatile void __iomem *addr) { } + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + #endif /* CONFIG_MMU */ /* -- cgit v0.10.2 From 6ebe7da25b7879194fdb5c43ea67b383dd9014d6 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Wed, 24 Oct 2012 13:15:21 -0700 Subject: xtensa: reset windowbase/windowstart when cloning the VM When we copy a user thread with CLONE_VM, we also have to reset windowbase and windowstart to start a pristine stack frame. Otherwise, overflows can happen using the address 0 as the stack pointer. Also add a special case for vfork, which continues on the parent stack until it calls execve. Because this could be a call8, we need to spill the stack pointer of the previus frame (if still 'live' in the register file). Signed-off-by: Chris Zankel diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 1908f66..341c151 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -220,8 +220,32 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, if (user_mode(regs)) { childregs->areg[1] = usp; + + /* When sharing memory with the parent thread, the child + usually starts on a pristine stack, so we have to reset + windowbase, windowstart and wmask. + (Note that such a new thread is required to always create + an initial call4 frame) + The exception is vfork, where the new thread continues to + run on the parent's stack until it calls execve. This could + be a call8 or call12, which requires a legal stack frame + of the previous caller for the overflow handlers to work. + (Note that it's always legal to overflow live registers). + In this case, ensure to spill at least the stack pointer + of that frame. */ + if (clone_flags & CLONE_VM) { - childregs->wmask = 1; /* can't share live windows */ + /* check that caller window is live and same stack */ + int len = childregs->wmask & ~0xf; + if (regs->areg[1] == usp && len != 0) { + int callinc = (regs->areg[0] >> 30) & 3; + int caller_ars = XCHAL_NUM_AREGS - callinc * 4; + put_user(regs->areg[caller_ars+1], + (unsigned __user*)(usp - 12)); + } + childregs->wmask = 1; + childregs->windowstart = 1; + childregs->windowbase = 0; } else { int len = childregs->wmask & ~0xf; memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], -- cgit v0.10.2 From 3306a72669a2af23b324540b08e68e82ac5b7dab Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:50 +0400 Subject: xtensa: switch to generic kernel_thread() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index cdcb48a..9525b70 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -13,6 +13,7 @@ config XTENSA select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP + select GENERIC_KERNEL_THREAD select ARCH_WANT_OPTIONAL_GPIOLIB help Xtensa processors are 32-bit RISC machines designed by Tensilica diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index 5c371d8..2d630e7 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -152,6 +152,7 @@ struct thread_struct { /* Clearing a0 terminates the backtrace. */ #define start_thread(regs, new_pc, new_sp) \ + memset(regs, 0, sizeof(*regs)); \ regs->pc = new_pc; \ regs->ps = USER_PS_VALUE; \ regs->areg[1] = new_sp; \ @@ -168,9 +169,6 @@ struct mm_struct; /* Free all resources held by a thread. */ #define release_thread(thread) do { } while(0) -/* Create a kernel thread without removing it from tasklists */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - /* Copy and release all segment info associated with a VM */ #define copy_segments(p, mm) do { } while(0) #define release_segments(mm) do { } while(0) diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 18453067..d4ec138 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1833,34 +1833,6 @@ ENTRY(system_call) /* - * Create a kernel thread - * - * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) - * a2 a2 a3 a4 - */ - -ENTRY(kernel_thread) - entry a1, 16 - - mov a5, a2 # preserve fn over syscall - mov a7, a3 # preserve args over syscall - - movi a3, _CLONE_VM | _CLONE_UNTRACED - movi a2, __NR_clone - or a6, a4, a3 # arg0: flags - mov a3, a1 # arg1: sp - syscall - - beq a3, a1, 1f # branch if parent - mov a6, a7 # args - callx4 a5 # fn(args) - - movi a2, __NR_exit - syscall # return value of fn(args) still in a6 - -1: retw - -/* * Do a system call from kernel instead of calling sys_execve, so we end up * with proper pt_regs. * @@ -1958,3 +1930,16 @@ ENTRY(ret_from_fork) j common_exception_return +/* + * Kernel thread creation helper + * On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg + * left from _switch_to: a6 = prev + */ +ENTRY(ret_from_kernel_thread) + + call4 schedule_tail + mov a6, a3 + callx4 a2 + call4 do_exit + +ENDPROC(ret_from_kernel_thread) diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 341c151..be52fe4 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -45,6 +45,7 @@ #include extern void ret_from_fork(void); +extern void ret_from_kernel_thread(void); struct task_struct *current_set[NR_CPUS] = {&init_task, }; @@ -158,18 +159,30 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) /* * Copy thread. * + * There are two modes in which this function is called: + * 1) Userspace thread creation, + * regs != NULL, usp_thread_fn is userspace stack pointer. + * It is expected to copy parent regs (in case CLONE_VM is not set + * in the clone_flags) and set up passed usp in the childregs. + * 2) Kernel thread creation, + * regs == NULL, usp_thread_fn is the function to run in the new thread + * and thread_fn_arg is its parameter. + * childregs are not used for the kernel threads. + * * The stack layout for the new thread looks like this: * - * +------------------------+ <- sp in childregs (= tos) + * +------------------------+ * | childregs | * +------------------------+ <- thread.sp = sp in dummy-frame * | dummy-frame | (saved in dummy-frame spill-area) * +------------------------+ * - * We create a dummy frame to return to ret_from_fork: - * a0 points to ret_from_fork (simulating a call4) + * We create a dummy frame to return to either ret_from_fork or + * ret_from_kernel_thread: + * a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4) * sp points to itself (thread.sp) - * a2, a3 are unused. + * a2, a3 are unused for userspace threads, + * a2 points to thread_fn, a3 holds thread_fn arg for kernel threads. * * Note: This is a pristine frame, so we don't need any spill region on top of * childregs. @@ -185,41 +198,37 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) * involved. Much simpler to just not copy those live frames across. */ -int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long unused, - struct task_struct * p, struct pt_regs * regs) +int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn, + unsigned long thread_fn_arg, + struct task_struct *p, struct pt_regs *unused) { - struct pt_regs *childregs; - unsigned long tos; - int user_mode = user_mode(regs); + struct pt_regs *childregs = task_pt_regs(p); #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) struct thread_info *ti; #endif - /* Set up new TSS. */ - tos = (unsigned long)task_stack_page(p) + THREAD_SIZE; - if (user_mode) - childregs = (struct pt_regs*)(tos - PT_USER_SIZE); - else - childregs = (struct pt_regs*)tos - 1; - - /* This does not copy all the regs. In a bout of brilliance or madness, - ARs beyond a0-a15 exist past the end of the struct. */ - *childregs = *regs; - /* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */ *((int*)childregs - 3) = (unsigned long)childregs; *((int*)childregs - 4) = 0; - childregs->areg[2] = 0; - p->set_child_tid = p->clear_child_tid = NULL; - p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1); p->thread.sp = (unsigned long)childregs; - if (user_mode(regs)) { + if (!(p->flags & PF_KTHREAD)) { + struct pt_regs *regs = current_pt_regs(); + unsigned long usp = usp_thread_fn ? + usp_thread_fn : regs->areg[1]; + + p->thread.ra = MAKE_RA_FOR_CALL( + (unsigned long)ret_from_fork, 0x1); + /* This does not copy all the regs. + * In a bout of brilliance or madness, + * ARs beyond a0-a15 exist past the end of the struct. + */ + *childregs = *regs; childregs->areg[1] = usp; + childregs->areg[2] = 0; /* When sharing memory with the parent thread, the child usually starts on a pristine stack, so we have to reset @@ -254,11 +263,19 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, // FIXME: we need to set THREADPTR in thread_info... if (clone_flags & CLONE_SETTLS) childregs->areg[2] = childregs->areg[6]; - } else { - /* In kernel space, we start a new thread with a new stack. */ - childregs->wmask = 1; - childregs->areg[1] = tos; + p->thread.ra = MAKE_RA_FOR_CALL( + (unsigned long)ret_from_kernel_thread, 1); + + /* pass parameters to ret_from_kernel_thread: + * a2 = thread_fn, a3 = thread_fn arg + */ + *((int *)childregs - 1) = thread_fn_arg; + *((int *)childregs - 2) = usp_thread_fn; + + /* Childregs are only used when we're going to userspace + * in which case start_thread will set them up. + */ } #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) @@ -354,8 +371,6 @@ long xtensa_clone(unsigned long clone_flags, unsigned long newsp, void __user *child_tid, long a5, struct pt_regs *regs) { - if (!newsp) - newsp = regs->areg[1]; return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); } diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index a8b9f1f..afe058b 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -43,7 +43,6 @@ EXPORT_SYMBOL(__strncpy_user); EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(empty_zero_page); /* -- cgit v0.10.2 From f0a1bf0859ffa059f9009d6a17e8d46241fb2161 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:51 +0400 Subject: xtensa: switch to generic kernel_execve() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 9525b70..0d1f36a 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -14,6 +14,7 @@ config XTENSA select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE select ARCH_WANT_OPTIONAL_GPIOLIB help Xtensa processors are 32-bit RISC machines designed by Tensilica diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index d4ec138..90bfc1d 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1833,22 +1833,6 @@ ENTRY(system_call) /* - * Do a system call from kernel instead of calling sys_execve, so we end up - * with proper pt_regs. - * - * int kernel_execve(const char *fname, char *const argv[], charg *const envp[]) - * a2 a2 a3 a4 - */ - -ENTRY(kernel_execve) - entry a1, 16 - mov a6, a2 # arg0 is in a6 - movi a2, __NR_execve - syscall - - retw - -/* * Task switch. * * struct task* _switch_to (struct task* prev, struct task* next) @@ -1940,6 +1924,6 @@ ENTRY(ret_from_kernel_thread) call4 schedule_tail mov a6, a3 callx4 a2 - call4 do_exit + j common_exception_return ENDPROC(ret_from_kernel_thread) -- cgit v0.10.2 From dc241f2c1761bfdec85915f4bbf7e750663f3442 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:52 +0400 Subject: xtensa: switch to generic sys_execve() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index c1dacca..124aeee 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -10,7 +10,7 @@ struct pt_regs; struct sigaction; -asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); +asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*); asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); asmlinkage long xtensa_ptrace(long, long, long, long); asmlinkage long xtensa_sigreturn(struct pt_regs*); diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index d9fa52d..f4e6eaa 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -1,6 +1,7 @@ #ifndef _XTENSA_UNISTD_H #define _XTENSA_UNISTD_H +#define __ARCH_WANT_SYS_EXECVE #include /* diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 1fd157f..9f36d0e 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -262,7 +262,7 @@ __SYSCALL(115, sys_sendmmsg, 4) #define __NR_clone 116 __SYSCALL(116, xtensa_clone, 5) #define __NR_execve 117 -__SYSCALL(117, xtensa_execve, 3) +__SYSCALL(117, sys_execve, 3) #define __NR_exit 118 __SYSCALL(118, sys_exit, 1) #define __NR_exit_group 119 diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index be52fe4..09ae7bf 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -373,28 +373,3 @@ long xtensa_clone(unsigned long clone_flags, unsigned long newsp, { return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); } - -/* - * xtensa_execve() executes a new program. - */ - -asmlinkage -long xtensa_execve(const char __user *name, - const char __user *const __user *argv, - const char __user *const __user *envp, - long a3, long a4, long a5, - struct pt_regs *regs) -{ - long error; - struct filename *filename; - - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename->name, argv, envp, regs); - putname(filename); -out: - return error; -} - -- cgit v0.10.2 From f82f64dd9f485e13f29f369772d4a0e868e5633a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 25 Oct 2012 15:45:26 -0700 Subject: x86, mm: Undo incorrect revert in arch/x86/mm/init.c Commit 844ab6f9 x86, mm: Find_early_table_space based on ranges that are actually being mapped added back some lines back wrongly that has been removed in commit 7b16bbf97 Revert "x86/mm: Fix the size calculation of mapping tables" remove them again. Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQW_vuaYQbmagVnxT2DGsYc=9tNeAbdBq53sYkitPOwxSQ@mail.gmail.com Acked-by: Jacob Shin Signed-off-by: H. Peter Anvin diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index bc287d6..d7aea41 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -65,10 +65,6 @@ static void __init find_early_table_space(struct map_range *mr, int nr_range) #ifdef CONFIG_X86_32 extra += PMD_SIZE; #endif - /* The first 2/4M doesn't use large pages. */ - if (mr[i].start < PMD_SIZE) - extra += range; - ptes += (extra + PAGE_SIZE - 1) >> PAGE_SHIFT; } else { ptes += (range + PAGE_SIZE - 1) >> PAGE_SHIFT; -- cgit v0.10.2 From 2008713c7174e5c0f207bac684c6df0939047009 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 24 Oct 2012 14:11:48 -0700 Subject: Makefile: Documentation for external tool should be correct If one includes documentation for an external tool, it should be correct. This is not: 1. Overriding the input to rngd should typically be neither necessary nor desired. This is especially so since newer versions of rngd support a number of different *types* of sources. 2. The default kernel-exported device is called /dev/hwrng not /dev/hwrandom nor /dev/hw_random (both of which were used in the past; however, kernel and udev seem to have converged on /dev/hwrng.) Overall it is better if the documentation for rngd is kept with rngd rather than in a kernel Makefile. Signed-off-by: H. Peter Anvin Cc: David Howells Cc: Jeff Garzik Signed-off-by: Linus Torvalds diff --git a/kernel/Makefile b/kernel/Makefile index 0dfeca4..86e3285 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -174,10 +174,8 @@ signing_key.priv signing_key.x509: x509.genkey @echo "###" @echo "### If this takes a long time, you might wish to run rngd in the" @echo "### background to keep the supply of entropy topped up. It" - @echo "### needs to be run as root, and should use a hardware random" - @echo "### number generator if one is available, eg:" - @echo "###" - @echo "### rngd -r /dev/hwrandom" + @echo "### needs to be run as root, and uses a hardware random" + @echo "### number generator if one is available." @echo "###" openssl req -new -nodes -utf8 $(sign_key_with_hash) -days 36500 -batch \ -x509 -config x509.genkey \ -- cgit v0.10.2 From aea2bf6a57a9e4596bfad164f986ba10ddc6adf3 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sun, 21 Oct 2012 00:38:03 -0700 Subject: Input: wacom - handle split-sensor devices with internal hubs Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 9edf980..8b89e15 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -613,6 +613,30 @@ struct wacom_usbdev_data { static LIST_HEAD(wacom_udev_list); static DEFINE_MUTEX(wacom_udev_list_lock); +static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product) +{ + int port1; + struct usb_device *sibling; + + if (vendor == 0 && product == 0) + return dev; + + if (dev->parent == NULL) + return NULL; + + usb_hub_for_each_child(dev->parent, port1, sibling) { + struct usb_device_descriptor *d; + if (sibling == NULL) + continue; + + d = &sibling->descriptor; + if (d->idVendor == vendor && d->idProduct == product) + return sibling; + } + + return NULL; +} + static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev) { struct wacom_usbdev_data *data; @@ -1257,13 +1281,19 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { + struct usb_device *other_dev; + /* Append the device type to the name */ strlcat(wacom_wac->name, features->device_type == BTN_TOOL_PEN ? " Pen" : " Finger", sizeof(wacom_wac->name)); - error = wacom_add_shared_data(wacom_wac, dev); + + other_dev = wacom_get_sibling(dev, features->oVid, features->oPid); + if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL) + other_dev = dev; + error = wacom_add_shared_data(wacom_wac, other_dev); if (error) goto fail3; } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c3468c8..21d1f4e 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1340,7 +1340,8 @@ void wacom_setup_device_quirks(struct wacom_features *features) /* these device have multiple inputs */ if (features->type >= WIRELESS || - (features->type >= INTUOS5S && features->type <= INTUOS5L)) + (features->type >= INTUOS5S && features->type <= INTUOS5L) || + (features->oVid && features->oPid)) features->quirks |= WACOM_QUIRK_MULTI_INPUT; /* quirk for bamboo touch with 2 low res touches */ diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 96c185c..3f926ec 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -109,6 +109,8 @@ struct wacom_features { int distance_fuzz; unsigned quirks; unsigned touch_max; + int oVid; + int oPid; }; struct wacom_shared { -- cgit v0.10.2 From b1e4279e4ef5549bf6ebf8f6f17dd26f0af8e8a2 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Sun, 21 Oct 2012 00:38:04 -0700 Subject: Input: wacom - add touch sensor support for Cintiq 24HD touch Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 8b89e15..2c1e12b 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf, features->pktlen = WACOM_PKGLEN_TPC2FG; } - if (features->type == MTSCREEN) + if (features->type == MTSCREEN || WACOM_24HDT) features->pktlen = WACOM_PKGLEN_MTOUCH; if (features->type == BAMBOO_PT) { @@ -402,6 +402,14 @@ static int wacom_parse_hid(struct usb_interface *intf, features->x_max = get_unaligned_le16(&report[i + 8]); i += 15; + } else if (features->type == WACOM_24HDT) { + features->x_max = + get_unaligned_le16(&report[i + 3]); + features->x_phy = + get_unaligned_le16(&report[i + 8]); + features->unit = report[i - 1]; + features->unitExpo = report[i - 3]; + i += 12; } else { features->x_max = get_unaligned_le16(&report[i + 3]); @@ -434,6 +442,12 @@ static int wacom_parse_hid(struct usb_interface *intf, features->y_phy = get_unaligned_le16(&report[i + 6]); i += 7; + } else if (type == WACOM_24HDT) { + features->y_max = + get_unaligned_le16(&report[i + 3]); + features->y_phy = + get_unaligned_le16(&report[i - 2]); + i += 7; } else if (type == BAMBOO_PT) { features->y_phy = get_unaligned_le16(&report[i + 3]); @@ -541,6 +555,9 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat /* MT Tablet PC touch */ return wacom_set_device_mode(intf, 3, 4, 4); } + else if (features->type == WACOM_24HDT) { + return wacom_set_device_mode(intf, 18, 3, 2); + } } else if (features->device_type == BTN_TOOL_PEN) { if (features->type <= BAMBOO_PT && features->type != WIRELESS) { return wacom_set_device_mode(intf, 2, 2, 2); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 21d1f4e..aa60101 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -806,6 +806,70 @@ static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid) return -1; } +static int int_dist(int x1, int y1, int x2, int y2) +{ + int x = x2 - x1; + int y = y2 - y1; + + return int_sqrt(x*x + y*y); +} + +static int wacom_24hdt_irq(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + char *data = wacom->data; + int i; + int current_num_contacts = data[61]; + int contacts_to_send = 0; + + /* + * First packet resets the counter since only the first + * packet in series will have non-zero current_num_contacts. + */ + if (current_num_contacts) + wacom->num_contacts_left = current_num_contacts; + + /* There are at most 4 contacts per packet */ + contacts_to_send = min(4, wacom->num_contacts_left); + + for (i = 0; i < contacts_to_send; i++) { + int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1; + bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity; + int id = data[offset + 1]; + int slot = find_slot_from_contactid(wacom, id); + + if (slot < 0) + continue; + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + + if (touch) { + int t_x = le16_to_cpup((__le16 *)&data[offset + 2]); + int c_x = le16_to_cpup((__le16 *)&data[offset + 4]); + int t_y = le16_to_cpup((__le16 *)&data[offset + 6]); + int c_y = le16_to_cpup((__le16 *)&data[offset + 8]); + int w = le16_to_cpup((__le16 *)&data[offset + 10]); + int h = le16_to_cpup((__le16 *)&data[offset + 12]); + + input_report_abs(input, ABS_MT_POSITION_X, t_x); + input_report_abs(input, ABS_MT_POSITION_Y, t_y); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h)); + input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y)); + input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h)); + input_report_abs(input, ABS_MT_ORIENTATION, w > h); + } + wacom->slots[slot] = touch ? id : -1; + } + + input_mt_report_pointer_emulation(input, true); + + wacom->num_contacts_left -= contacts_to_send; + if (wacom->num_contacts_left <= 0) + wacom->num_contacts_left = 0; + + return 1; +} + static int wacom_mt_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; @@ -1255,6 +1319,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) sync = wacom_intuos_irq(wacom_wac); break; + case WACOM_24HDT: + sync = wacom_24hdt_irq(wacom_wac); + break; + case INTUOS5S: case INTUOS5: case INTUOS5L: @@ -1576,6 +1644,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; + case WACOM_24HDT: + if (features->device_type == BTN_TOOL_FINGER) { + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + } + /* fall through */ + case MTSCREEN: if (features->device_type == BTN_TOOL_FINGER) { wacom_wac->slots = kmalloc(features->touch_max * @@ -1870,8 +1947,11 @@ static const struct wacom_features wacom_features_0xF4 = { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF8 = - { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; + { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */ + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; +static const struct wacom_features wacom_features_0xF6 = + { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; @@ -2114,6 +2194,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, { USB_DEVICE_WACOM(0xF8) }, + { USB_DEVICE_WACOM(0xF6) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_LENOVO(0x6004) }, { } diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 3f926ec..345f1e7 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -29,6 +29,7 @@ /* wacom data size per MT contact */ #define WACOM_BYTES_PER_MT_PACKET 11 +#define WACOM_BYTES_PER_24HDT_PACKET 14 /* device IDs */ #define STYLUS_DEVICE_ID 0x02 @@ -49,6 +50,7 @@ #define WACOM_REPORT_TPCHID 15 #define WACOM_REPORT_TPCST 16 #define WACOM_REPORT_TPC1FGE 18 +#define WACOM_REPORT_24HDT 1 /* device quirks */ #define WACOM_QUIRK_MULTI_INPUT 0x0001 @@ -81,6 +83,7 @@ enum { WACOM_MO, WIRELESS, BAMBOO_PT, + WACOM_24HDT, TABLETPC, /* add new TPC below */ TABLETPCE, TABLETPC2FG, -- cgit v0.10.2 From 879dca019dc43a1622edca3e7dde644b14b5acc5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 26 Oct 2012 01:05:56 +0200 Subject: ACPI: missing break We handle NOTIFY_THROTTLING so don't then fall through to unsupported event. Signed-off-by: Alan Cox Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index e78c2a5..bd4e5dc 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -409,6 +409,7 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event) acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, dev_name(&device->dev), event, 0); + break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); -- cgit v0.10.2 From 8bc5e4ea3ea0e24142db2dc941233eab2a223ed4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 26 Oct 2012 00:10:32 -0400 Subject: ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA In order to decide if ktest should bother installing modules on the target box, it checks if the config file has CONFIG_MODULES=y. But it also checks if the '=y' part exists. It only will install modules if the config exists and is set with '=y'. But as the regex that was used tests: /^CONFIG_MODULES(=y)?/ this will also match: CONFIG_MODULES_USE_ELF_RELA as the '=y' part was optional and it did not test the rest of the line. When this happens, ktest will stop checking the rest of the configs but it will also think that no modules are needed to be installed. What it should do is only jump out of the loop if it actually found a CONFIG_MODULES that is set to true. Otherwise, ktest wont install the necessary modules needed for proper booting of the test target. Signed-off-by: Steven Rostedt diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index b51d787..c7ba761 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1740,8 +1740,10 @@ sub install { open(IN, "$output_config") or dodie("Can't read config file"); while () { if (/CONFIG_MODULES(=y)?/) { - $install_mods = 1 if (defined($1)); - last; + if (defined($1)) { + $install_mods = 1; + last; + } } } close(IN); -- cgit v0.10.2 From 697575896670ba9e76760ce8bbc1f5a3001967d6 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 26 Oct 2012 07:39:13 +0200 Subject: Revert "ARM: dma-mapping: support debug_dma_mapping_error" This reverts commit 871ae57adc5ed092c1341f411514d0e8482e2611, which is scheduled for v3.8 and accidently got into v3.7-rc series. Signed-off-by: Marek Szyprowski diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 78d8e9b..2300484 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -91,7 +91,6 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - debug_dma_mapping_error(dev, dma_addr); return dma_addr == DMA_ERROR_CODE; } -- cgit v0.10.2 From c6fdd8e5d0c65bb8821dc6da26ee1a2ddd58b3cc Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Wed, 24 Oct 2012 08:44:32 +0000 Subject: bas_gigaset: fix pre_reset handling The delayed work function int_in_work() may call usb_reset_device() and thus, indirectly, the driver's pre_reset method. Trying to cancel the work synchronously in that situation would deadlock. Fix by avoiding cancel_work_sync() in the pre_reset method. If the reset was NOT initiated by int_in_work() this might cause int_in_work() to run after the post_reset method, with urb_int_in already resubmitted, so handle that case gracefully. Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index 5275887..c44950d 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -617,7 +617,13 @@ static void int_in_work(struct work_struct *work) if (rc == 0) /* success, resubmit interrupt read URB */ rc = usb_submit_urb(urb, GFP_ATOMIC); - if (rc != 0 && rc != -ENODEV) { + + switch (rc) { + case 0: /* success */ + case -ENODEV: /* device gone */ + case -EINVAL: /* URB already resubmitted, or terminal badness */ + break; + default: /* failure: try to recover by resetting the device */ dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc)); rc = usb_lock_device_for_reset(ucs->udev, ucs->interface); if (rc == 0) { @@ -2442,7 +2448,9 @@ static void gigaset_disconnect(struct usb_interface *interface) } /* gigaset_suspend - * This function is called before the USB connection is suspended. + * This function is called before the USB connection is suspended + * or before the USB device is reset. + * In the latter case, message == PMSG_ON. */ static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) { @@ -2498,7 +2506,12 @@ static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) del_timer_sync(&ucs->timer_atrdy); del_timer_sync(&ucs->timer_cmd_in); del_timer_sync(&ucs->timer_int_in); - cancel_work_sync(&ucs->int_in_wq); + + /* don't try to cancel int_in_wq from within reset as it + * might be the one requesting the reset + */ + if (message.event != PM_EVENT_ON) + cancel_work_sync(&ucs->int_in_wq); gig_dbg(DEBUG_SUSPEND, "suspend complete"); return 0; -- cgit v0.10.2 From ad2fab36d7922401c4576fb7ea9b21a47a29a17f Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 25 Oct 2012 14:03:03 +0300 Subject: gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios gpios requested with invalid numbers, or gpios requested from userspace via sysfs should not try to be deferred on failure. Cc: stable@kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5d6c71e..1c8d9e3 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -623,9 +623,11 @@ static ssize_t export_store(struct class *class, */ status = gpio_request(gpio, "sysfs"); - if (status < 0) + if (status < 0) { + if (status == -EPROBE_DEFER) + status = -ENODEV; goto done; - + } status = gpio_export(gpio, true); if (status < 0) gpio_free(gpio); @@ -1191,8 +1193,10 @@ int gpio_request(unsigned gpio, const char *label) spin_lock_irqsave(&gpio_lock, flags); - if (!gpio_is_valid(gpio)) + if (!gpio_is_valid(gpio)) { + status = -EINVAL; goto done; + } desc = &gpio_desc[gpio]; chip = desc->chip; if (chip == NULL) -- cgit v0.10.2 From 7208ca300725ebc1dd4c60511ed67a69c684eb91 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 25 Oct 2012 01:12:47 +0000 Subject: net/mlx4_en: Fix double-release-range in tx-rings The QP range is reserved as a single block. However, when freeing the en resources, the tx-ring QPs are released both in mlx4_en_destroy_tx_ring (one at a time) and in mlx4_en_free_resources (as a block release). Fix by eliminating the one-at-a-time release in mlx4_en_destroy_tx_ring. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index c10e3a6..0a51095 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -143,7 +143,6 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, mlx4_bf_free(mdev->dev, &ring->bf); mlx4_qp_remove(mdev->dev, &ring->qp); mlx4_qp_free(mdev->dev, &ring->qp); - mlx4_qp_release_range(mdev->dev, ring->qpn, 1); mlx4_en_unmap_buffer(&ring->wqres.buf); mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); kfree(ring->bounce_buf); -- cgit v0.10.2 From 2b39a06198a0fbaf44a69f435c5d2b4280a0c10e Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Thu, 25 Oct 2012 01:12:48 +0000 Subject: net/mlx4_en: Don't use vlan tag value as an indication for vlan presence The vlan tag can be zero. This is why it can't serve as an indication that packet requires VLAN header in the TX flow. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 0a51095..b35094c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -711,7 +711,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) if (bounce) tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size); - if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) { + if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) { *(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn); op_own |= htonl((bf_index & 0xffff) << 8); /* Ensure new descirptor hits memory -- cgit v0.10.2 From bfc0d8c3de31a51e671e2c1564fd194fa6b00179 Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Thu, 25 Oct 2012 01:12:49 +0000 Subject: net/mlx4_core: Unmap UAR also in the case of error flow If a failure takes place during the EQ creation, we need to unmap the UAR memory block too. Signed-off-by: Dotan Barak Signed-off-by: Uri Habusha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 51c7649..083767b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -843,6 +843,18 @@ static void __iomem *mlx4_get_eq_uar(struct mlx4_dev *dev, struct mlx4_eq *eq) return priv->eq_table.uar_map[index] + 0x800 + 8 * (eq->eqn % 4); } +static void mlx4_unmap_uar(struct mlx4_dev *dev) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + int i; + + for (i = 0; i < mlx4_num_eq_uar(dev); ++i) + if (priv->eq_table.uar_map[i]) { + iounmap(priv->eq_table.uar_map[i]); + priv->eq_table.uar_map[i] = NULL; + } +} + static int mlx4_create_eq(struct mlx4_dev *dev, int nent, u8 intr, struct mlx4_eq *eq) { @@ -1207,6 +1219,7 @@ err_out_unmap: mlx4_free_irqs(dev); err_out_bitmap: + mlx4_unmap_uar(dev); mlx4_bitmap_cleanup(&priv->eq_table.bitmap); err_out_free: @@ -1231,10 +1244,7 @@ void mlx4_cleanup_eq_table(struct mlx4_dev *dev) if (!mlx4_is_slave(dev)) mlx4_unmap_clr_int(dev); - for (i = 0; i < mlx4_num_eq_uar(dev); ++i) - if (priv->eq_table.uar_map[i]) - iounmap(priv->eq_table.uar_map[i]); - + mlx4_unmap_uar(dev); mlx4_bitmap_cleanup(&priv->eq_table.bitmap); kfree(priv->eq_table.uar_map); -- cgit v0.10.2 From 39707c2a3ba5011038b363f84d37c8a98d2d9db1 Mon Sep 17 00:00:00 2001 From: Hemant Kumar Date: Thu, 25 Oct 2012 18:17:54 +0000 Subject: net: usb: Fix memory leak on Tx data path Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar Acked-by: Oliver Neukum Signed-off-by: David S. Miller diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f9819d1..cb04f90 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1158,6 +1158,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, usb_anchor_urb(urb, &dev->deferred); /* no use to process more packets */ netif_stop_queue(net); + usb_put_urb(urb); spin_unlock_irqrestore(&dev->txq.lock, flags); netdev_dbg(dev->net, "Delaying transmission for resumption\n"); goto deferred; @@ -1310,6 +1311,8 @@ void usbnet_disconnect (struct usb_interface *intf) cancel_work_sync(&dev->kevent); + usb_scuttle_anchored_urbs(&dev->deferred); + if (dev->driver_info->unbind) dev->driver_info->unbind (dev, intf); -- cgit v0.10.2 From f8295ec22cb0f1ee6849b862addbfa3ea9320755 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 24 Oct 2012 12:10:34 +0000 Subject: qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman Acked-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index a03de71..d012982 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -592,6 +592,32 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Novatel USB551L and MC551 - handled by qmi_wwan */ +{ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = NOVATEL_VENDOR_ID, + .idProduct = 0xB001, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = 0, +}, + +/* Novatel E362 - handled by qmi_wwan */ +{ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = NOVATEL_VENDOR_ID, + .idProduct = 0x9010, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = 0, +}, + /* * WHITELIST!!! * @@ -604,21 +630,6 @@ static const struct usb_device_id products [] = { * because of bugs/quirks in a given product (like Zaurus, above). */ { - /* Novatel USB551L */ - /* This match must come *before* the generic CDC-ETHER match so that - * we get FLAG_WWAN set on the device, since it's descriptors are - * generic CDC-ETHER. - */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR - | USB_DEVICE_ID_MATCH_PRODUCT - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = NOVATEL_VENDOR_ID, - .idProduct = 0xB001, - .bInterfaceClass = USB_CLASS_COMM, - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, - .bInterfaceProtocol = USB_CDC_PROTO_NONE, - .driver_info = (unsigned long)&wwan_info, -}, { /* ZTE (Vodafone) K3805-Z */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 9d23ba2..3b566fa 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -369,6 +369,20 @@ static const struct usb_device_id products[] = { USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), .driver_info = (unsigned long)&qmi_wwan_info, }, + { /* Novatel USB551L and MC551 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* Novatel E362 */ + USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, + USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&qmi_wwan_info, + }, /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, -- cgit v0.10.2 From 3da3fff8006c608f19a51859d44ba47ca8b41461 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 25 Oct 2012 07:25:20 +0000 Subject: tilegx: fix some issues in the SW TSO support This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf Cc: stable@vger.kernel.org [v3.6] Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 4e2a162..4e98100 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -1334,11 +1334,11 @@ static int tso_count_edescs(struct sk_buff *skb) { struct skb_shared_info *sh = skb_shinfo(skb); unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned int p_len = sh->gso_size; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ long n; /* size of the current piece of payload */ int num_edescs = 0; int segment; @@ -1353,7 +1353,7 @@ static int tso_count_edescs(struct sk_buff *skb) /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; + f_size = skb_frag_size(&sh->frags[f_id]); f_used = 0; } @@ -1384,13 +1384,13 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, struct iphdr *ih; struct tcphdr *th; unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned char *data = skb->data; unsigned int ih_off, th_off, p_len; unsigned int isum_seed, tsum_seed, id, seq; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ long n; /* size of the current piece of payload */ int segment; @@ -1405,7 +1405,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, isum_seed = ((0xFFFF - ih->check) + (0xFFFF - ih->tot_len) + (0xFFFF - ih->id)); - tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len)); + tsum_seed = th->check + (0xFFFF ^ htons(skb->len)); id = ntohs(ih->id); seq = ntohl(th->seq); @@ -1444,7 +1444,7 @@ static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers, /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; + f_size = skb_frag_size(&sh->frags[f_id]); f_used = 0; } @@ -1478,14 +1478,14 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, struct tile_net_priv *priv = netdev_priv(dev); struct skb_shared_info *sh = skb_shinfo(skb); unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - unsigned int data_len = skb->data_len + skb->hdr_len - sh_len; + unsigned int data_len = skb->len - sh_len; unsigned int p_len = sh->gso_size; gxio_mpipe_edesc_t edesc_head = { { 0 } }; gxio_mpipe_edesc_t edesc_body = { { 0 } }; long f_id = -1; /* id of the current fragment */ - long f_size = skb->hdr_len; /* size of the current fragment */ - long f_used = sh_len; /* bytes used from the current fragment */ - void *f_data = skb->data; + long f_size = skb_headlen(skb) - sh_len; /* current fragment size */ + long f_used = 0; /* bytes used from the current fragment */ + void *f_data = skb->data + sh_len; long n; /* size of the current piece of payload */ unsigned long tx_packets = 0, tx_bytes = 0; unsigned int csum_start; @@ -1516,15 +1516,18 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, /* Egress the payload. */ while (p_used < p_len) { + void *va; /* Advance as needed. */ while (f_used >= f_size) { f_id++; - f_size = sh->frags[f_id].size; - f_used = 0; + f_size = skb_frag_size(&sh->frags[f_id]); f_data = tile_net_frag_buf(&sh->frags[f_id]); + f_used = 0; } + va = f_data + f_used; + /* Use bytes from the current fragment. */ n = p_len - p_used; if (n > f_size - f_used) @@ -1533,7 +1536,7 @@ static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue, p_used += n; /* Egress a piece of the payload. */ - edesc_body.va = va_to_tile_io_addr(f_data) + f_used; + edesc_body.va = va_to_tile_io_addr(va); edesc_body.xfer_size = n; edesc_body.bound = !(p_used < p_len); gxio_mpipe_equeue_put_at(equeue, edesc_body, slot); -- cgit v0.10.2 From 5afc13af36d2fdaa48bc54386c6ad43590d88be5 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Fri, 26 Oct 2012 12:51:53 -0200 Subject: ALSA: hda - Fix mute-LED setup for HP dv5 laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The BIOS on HP dv5 doesn't have the DMI string to guide the setup of mute led GPIO and polarity. Associate this laptop with the hp-inv-led model. Signed-off-by: Gustavo Maciel Dias Vieira Tested-by: Vinícius Angiolucci Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 770013f..9ba8af0 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1763,6 +1763,8 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "HP", STAC_HP_ZEPHYR), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3660, "HP Mini", STAC_92HD83XXX_HP_LED), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x144E, + "HP Pavilion dv5", STAC_92HD83XXX_HP_INV_LED), {} /* terminator */ }; -- cgit v0.10.2 From e86b618547bb0c7db96aa70491112f032b3bec1c Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 25 Oct 2012 10:57:38 +0300 Subject: drm/i915: be less verbose about inability to provide vendor backlight commit 28dcc2d60cb570d9f549c329b2f51400553412a1 Author: Jani Nikula Date: Mon Sep 3 16:25:12 2012 +0300 drm/i915: do not expose a dysfunctional backlight interface to userspace prevents backlight interface creation if the BIOS has not set the backlight PWM CTL registers that contain the max PWM value. It's apparently normal on those machines, so demote the message about it to debug level. Reported-by: Orion Poplawski Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56330 Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index e019b23..e2aacd3 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -435,7 +435,7 @@ int intel_panel_setup_backlight(struct drm_device *dev) props.type = BACKLIGHT_RAW; props.max_brightness = _intel_panel_get_max_backlight(dev); if (props.max_brightness == 0) { - DRM_ERROR("Failed to get maximum backlight value\n"); + DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n"); return -ENODEV; } dev_priv->backlight = -- cgit v0.10.2 From 1623392af9da983f3ad088a75076c9da05e5600d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Oct 2012 12:06:41 +0100 Subject: drm/i915: Only kick out vesafb if we takeover the fbcon with KMS Otherwise we may remove the only console for a nomodeset system. We became more aggressive in our kicking with commit e188719a2891f01b3100dca4ae3a055fb5a7ab52 Author: Daniel Vetter Date: Tue Jun 12 11:28:17 2012 +0200 drm/i915: kick any firmware framebuffers before claiming the gtt Reported-and-tested-by: monnier@iro.umontreal.ca Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54615 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org # v3.6 Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c9bfd83..61ae104 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1505,7 +1505,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto put_gmch; } - i915_kick_out_firmware_fb(dev_priv); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + i915_kick_out_firmware_fb(dev_priv); pci_set_master(dev->pdev); -- cgit v0.10.2 From 561ec64ae67ef25cac8d72bb9c4bfc955edfd415 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 26 Oct 2012 10:05:07 -0700 Subject: VFS: don't do protected {sym,hard}links by default In commit 800179c9b8a1 ("This adds symlink and hardlink restrictions to the Linux VFS"), the new link protections were enabled by default, in the hope that no actual application would care, despite it being technically against legacy UNIX (and documented POSIX) behavior. However, it does turn out to break some applications. It's rare, and it's unfortunate, but it's unacceptable to break existing systems, so we'll have to default to legacy behavior. In particular, it has broken the way AFD distributes files, see http://www.dwd.de/AFD/ along with some legacy scripts. Distributions can end up setting this at initrd time or in system scripts: if you have security problems due to link attacks during your early boot sequence, you have bigger problems than some kernel sysctl setting. Do: echo 1 > /proc/sys/fs/protected_symlinks echo 1 > /proc/sys/fs/protected_hardlinks to re-enable the link protections. Alternatively, we may at some point introduce a kernel config option that sets these kinds of "more secure but not traditional" behavioural options automatically. Reported-by: Nick Bowler Reported-by: Holger Kiehl Cc: Kees Cook Cc: Ingo Molnar Cc: Andrew Morton Cc: Al Viro Cc: Alan Cox Cc: Theodore Ts'o Cc: stable@kernel.org # v3.6 Signed-off-by: Linus Torvalds diff --git a/fs/namei.c b/fs/namei.c index d1895f3..937f9d5 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -705,8 +705,8 @@ static inline void put_link(struct nameidata *nd, struct path *link, void *cooki path_put(link); } -int sysctl_protected_symlinks __read_mostly = 1; -int sysctl_protected_hardlinks __read_mostly = 1; +int sysctl_protected_symlinks __read_mostly = 0; +int sysctl_protected_hardlinks __read_mostly = 0; /** * may_follow_link - Check symlink following for unsafe situations -- cgit v0.10.2 From 29c08cdabd323adf7fcc0d26077383d4daf7b09a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 9 Oct 2012 12:12:14 -0700 Subject: qla2xxx: Add missing ->vport_slock while calling qlt_update_vp_map All other callers of qlt_update_vp_map() already hold ->vport_slock while updating the vp target map, so go ahead and add the missing ->vport_slock within qla24xx_disable_vp() code. Cc: Saurav Kashyap Cc: Chad Dupuis Cc: Arun Easi Cc: Andrew Vasquez Cc: Jiri Kosina Cc: Roland Dreier Acked-by: Saurav Kashyap Signed-off-by: Nicholas Bellinger diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index bd4708a..20fd974 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -149,6 +149,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha) int qla24xx_disable_vp(scsi_qla_host_t *vha) { + unsigned long flags; int ret; ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); @@ -156,7 +157,9 @@ qla24xx_disable_vp(scsi_qla_host_t *vha) atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); /* Remove port id from vp target map */ + spin_lock_irqsave(&vha->hw->vport_slock, flags); qlt_update_vp_map(vha, RESET_AL_PA); + spin_unlock_irqrestore(&vha->hw->vport_slock, flags); qla2x00_mark_vp_devices_dead(vha); atomic_set(&vha->vp_state, VP_FAILED); -- cgit v0.10.2 From c046aa0f0f47719a38854fc6383216392b130704 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:31 -0700 Subject: tcm_qla2xxx: Format VPD page 83h SCSI name string according to SPC My draft of SPC-4 says the following about the SCSI name string in inquiry VPD page 83h: The SCSI NAME STRING field starts with either: a) the four UTF-8 characters 'eui.' concatenated with 16, 24, or 32 hexadecimal digits (i.e., the UTF-8 characters 0 through 9 and A through F) for an EUI-64 based identifier (see 7.8.6.5). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the EUI-64 based identifier; b) the four UTF-8 characters 'naa.' concatenated with 16 or 32 hexadecimal digits for an NAA identifier (see 7.8.6.6). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the NAA identifier; or c) the four UTF-8 characters 'iqn.' concatenated with an iSCSI Name for an iSCSI-name based identifier (see iSCSI). However, the .tpg_get_wwn method for tcm_qla2xxx formats the WWN so the SCSI name string looks like "52:4a:93:7d:24:5f:b2:12,t,0x0001". This patch corrects the code so that VPD 83h gives a SPC-compliant SCSI name string like "naa.524a937d245fb212,t,0x0001" while leavig other uses alone (so configfs will still work with ':' separated WWNs). Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Signed-off-by: Nicholas Bellinger diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 2358c16..d8211cc 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -237,7 +237,7 @@ static char *tcm_qla2xxx_get_fabric_wwn(struct se_portal_group *se_tpg) struct tcm_qla2xxx_tpg, se_tpg); struct tcm_qla2xxx_lport *lport = tpg->lport; - return &lport->lport_name[0]; + return lport->lport_naa_name; } static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg) @@ -1534,6 +1534,7 @@ static struct se_wwn *tcm_qla2xxx_make_lport( lport->lport_wwpn = wwpn; tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN, wwpn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn); ret = tcm_qla2xxx_init_lport(lport); if (ret != 0) @@ -1601,6 +1602,7 @@ static struct se_wwn *tcm_qla2xxx_npiv_make_lport( lport->lport_npiv_wwnn = npiv_wwnn; tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0], TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn); /* FIXME: tcm_qla2xxx_npiv_make_lport */ ret = -ENOSYS; diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 8254981..9ba075f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -61,6 +61,8 @@ struct tcm_qla2xxx_lport { u64 lport_npiv_wwnn; /* ASCII formatted WWPN for FC Target Lport */ char lport_name[TCM_QLA2XXX_NAMELEN]; + /* ASCII formatted naa WWPN for VPD page 83 etc */ + char lport_naa_name[TCM_QLA2XXX_NAMELEN]; /* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */ char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN]; /* map for fc_port pointers in 24-bit FC Port ID space */ -- cgit v0.10.2 From c8292d1da53fa60c7516ab03a9d83f7ea266d335 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:32 -0700 Subject: qla2xxx: Update target lookup session tables when a target session changes It is possible for the target code to change the loop_id or s_id of a target session in reaction to an FC fabric change. However, the session structures are stored in tables that are indexed by these two keys, and if we just change the session structure but leave the pointers to it in the old places in the table, havoc can ensue. For example, a new session might come along that should go in the old slot in the table and overwrite the old session pointer. To handle this, add a new tgt_ops->update_sess() method that also updates the "by loop_id" and "by s_id" lookup tables when a session changes, so that the keys where a session pointer is stored in these tables always matches the keys in the session structure itself. (nab: Drop unnecessary double inversion with FCF_CONF_COMP_SUPPORTED usage) Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0e09d8f..62aa558 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -557,6 +557,7 @@ static bool qlt_check_fcport_exist(struct scsi_qla_host *vha, int pmap_len; fc_port_t *fcport; int global_resets; + unsigned long flags; retry: global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count); @@ -625,10 +626,10 @@ retry: sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain, fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + spin_unlock_irqrestore(&ha->hardware_lock, flags); res = true; @@ -740,10 +741,9 @@ static struct qla_tgt_sess *qlt_create_sess( qlt_undelete_sess(sess); kref_get(&sess->se_sess->sess_kref); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + if (sess->local && !local) sess->local = 0; spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -796,8 +796,7 @@ static struct qla_tgt_sess *qlt_create_sess( */ kref_get(&sess->se_sess->sess_kref); - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED); BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name)); memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name)); @@ -869,10 +868,8 @@ void qlt_fc_port_added(struct scsi_qla_host *vha, fc_port_t *fcport) ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007, "Reappeared sess %p\n", sess); } - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); } if (sess && sess->local) { diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 170af15..bad7495 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -648,6 +648,7 @@ struct qla_tgt_func_tmpl { int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *, void *, uint8_t *, uint16_t); + void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool); struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *, const uint16_t); struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *, diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d8211cc..3d74f2f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1457,6 +1457,78 @@ static int tcm_qla2xxx_check_initiator_node_acl( return 0; } +static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id, + uint16_t loop_id, bool conf_compl_supported) +{ + struct qla_tgt *tgt = sess->tgt; + struct qla_hw_data *ha = tgt->ha; + struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr; + struct se_node_acl *se_nacl = sess->se_sess->se_node_acl; + struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl, + struct tcm_qla2xxx_nacl, se_node_acl); + u32 key; + + + if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24) + pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n", + sess, + sess->port_name[0], sess->port_name[1], + sess->port_name[2], sess->port_name[3], + sess->port_name[4], sess->port_name[5], + sess->port_name[6], sess->port_name[7], + sess->loop_id, loop_id, + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa, + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + + if (sess->loop_id != loop_id) { + /* + * Because we can shuffle loop IDs around and we + * update different sessions non-atomically, we might + * have overwritten this session's old loop ID + * already, and we might end up overwriting some other + * session that will be updated later. So we have to + * be extra careful and we can't warn about those things... + */ + if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl) + lport->lport_loopid_map[sess->loop_id].se_nacl = NULL; + + lport->lport_loopid_map[loop_id].se_nacl = se_nacl; + + sess->loop_id = loop_id; + } + + if (sess->s_id.b24 != s_id.b24) { + key = (((u32) sess->s_id.b.domain << 16) | + ((u32) sess->s_id.b.area << 8) | + ((u32) sess->s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) + WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl, + "Found wrong se_nacl when updating s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + else + WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + + key = (((u32) s_id.b.domain << 16) | + ((u32) s_id.b.area << 8) | + ((u32) s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) { + WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n", + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + btree_update32(&lport->lport_fcport_map, key, se_nacl); + } else { + btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC); + } + + sess->s_id = s_id; + nacl->nport_id = key; + } + + sess->conf_compl_supported = conf_compl_supported; +} + /* * Calls into tcm_qla2xxx used by qla2xxx LLD I/O path. */ @@ -1467,6 +1539,7 @@ static struct qla_tgt_func_tmpl tcm_qla2xxx_template = { .free_cmd = tcm_qla2xxx_free_cmd, .free_mcmd = tcm_qla2xxx_free_mcmd, .free_session = tcm_qla2xxx_free_session, + .update_sess = tcm_qla2xxx_update_sess, .check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl, .find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id, .find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id, -- cgit v0.10.2 From badecb001a310408d3473b1fc2ed5aefd0bc92a9 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 26 Oct 2012 18:54:25 +0200 Subject: mac80211: fix SSID copy on IBSS JOIN The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and its length is likely to be less than IEEE80211_MAX_SSID_LEN most of the time. This patch fixes the ssid copy in ieee80211_ibss_join() by using the SSID length to prevent it from reading beyond the string. Cc: stable@vger.kernel.org Signed-off-by: Antonio Quartulli [rewrapped commit message, small rewording] Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5f3620f..bf87c70 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1108,7 +1108,7 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; sdata->u.ibss.ibss_join_req = jiffies; - memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN); + memcpy(sdata->u.ibss.ssid, params->ssid, params->ssid_len); sdata->u.ibss.ssid_len = params->ssid_len; mutex_unlock(&sdata->u.ibss.mtx); -- cgit v0.10.2 From 7dd111e8ee10cc6816669eabcad3334447673236 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Oct 2012 21:51:59 +0200 Subject: wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index ef35f4e..45a09de 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -312,18 +312,15 @@ EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) { int ae = meshhdr->flags & MESH_FLAGS_AE; - /* 7.1.3.5a.2 */ + /* 802.11-2012, 8.2.4.7.3 */ switch (ae) { + default: case 0: return 6; case MESH_FLAGS_AE_A4: return 12; case MESH_FLAGS_AE_A5_A6: return 18; - case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6): - return 24; - default: - return 6; } } @@ -373,6 +370,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, /* make sure meshdr->flags is on the linear part */ if (!pskb_may_pull(skb, hdrlen + 1)) return -1; + if (meshdr->flags & MESH_FLAGS_AE_A4) + return -1; if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { skb_copy_bits(skb, hdrlen + offsetof(struct ieee80211s_hdr, eaddr1), @@ -397,6 +396,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, /* make sure meshdr->flags is on the linear part */ if (!pskb_may_pull(skb, hdrlen + 1)) return -1; + if (meshdr->flags & MESH_FLAGS_AE_A5_A6) + return -1; if (meshdr->flags & MESH_FLAGS_AE_A4) skb_copy_bits(skb, hdrlen + offsetof(struct ieee80211s_hdr, eaddr1), -- cgit v0.10.2 From 4a4f1a5808c8bb0b72a4f6e5904c53fb8c9cd966 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:33:36 +0200 Subject: mac80211: check management frame header length Due to pskb_may_pull() checking the skb length, all non-management frames are checked on input whether their 802.11 header is fully present. Also add that check for management frames and remove a check that is now duplicate. This prevents accessing skb data beyond the frame end. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c6865f2..99cdee1 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1470,7 +1470,6 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) frag = sc & IEEE80211_SCTL_FRAG; if (likely((!ieee80211_has_morefrags(fc) && frag == 0) || - (rx->skb)->len < 24 || is_multicast_ether_addr(hdr->addr1))) { /* not fragmented */ goto out; @@ -2915,10 +2914,15 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc)) local->dot11ReceivedFragmentCount++; - if (ieee80211_is_mgmt(fc)) - err = skb_linearize(skb); - else + if (ieee80211_is_mgmt(fc)) { + /* drop frame if too short for header */ + if (skb->len < ieee80211_hdrlen(fc)) + err = -ENOBUFS; + else + err = skb_linearize(skb); + } else { err = !pskb_may_pull(skb, ieee80211_hdrlen(fc)); + } if (err) { dev_kfree_skb(skb); -- cgit v0.10.2 From 9b395bc3be1cebf0144a127c7e67d56dbdac0930 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:36:40 +0200 Subject: mac80211: verify that skb data is present A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f8cd4cf..7d5b600 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2652,6 +2652,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); /** + * ieee80211_get_mesh_hdrlen - get mesh extension header length + * @meshhdr: the mesh extension header, only the flags field + * (first byte) will be accessed + * Returns the length of the extension header, which is always at + * least 6 bytes and at most 18 if address 5 and 6 are present. + */ +unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); + +/** * DOC: Data path helpers * * In addition to generic utilities, cfg80211 also offers diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 99cdee1..265a032d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -531,6 +531,11 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) if (ieee80211_is_action(hdr->frame_control)) { u8 category; + + /* make sure category field is present */ + if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE) + return RX_DROP_MONITOR; + mgmt = (struct ieee80211_mgmt *)hdr; category = mgmt->u.action.category; if (category != WLAN_CATEGORY_MESH_ACTION && @@ -1892,6 +1897,20 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) hdr = (struct ieee80211_hdr *) skb->data; hdrlen = ieee80211_hdrlen(hdr->frame_control); + + /* make sure fixed part of mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, hdrlen + 6)) + return RX_DROP_MONITOR; + + mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen); + + /* make sure full mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, + hdrlen + ieee80211_get_mesh_hdrlen(mesh_hdr))) + return RX_DROP_MONITOR; + + /* reload pointers */ + hdr = (struct ieee80211_hdr *) skb->data; mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen); /* frame is in RMC, don't forward */ @@ -1915,9 +1934,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (is_multicast_ether_addr(hdr->addr1)) { mpp_addr = hdr->addr3; proxied_addr = mesh_hdr->eaddr1; - } else { + } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) { + /* has_a4 already checked in ieee80211_rx_mesh_check */ mpp_addr = hdr->addr4; proxied_addr = mesh_hdr->eaddr2; + } else { + return RX_DROP_MONITOR; } rcu_read_lock(); @@ -2354,6 +2376,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; case WLAN_CATEGORY_SELF_PROTECTED: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.self_prot.action_code))) + break; + switch (mgmt->u.action.u.self_prot.action_code) { case WLAN_SP_MESH_PEERING_OPEN: case WLAN_SP_MESH_PEERING_CLOSE: @@ -2372,6 +2398,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; case WLAN_CATEGORY_MESH_ACTION: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.mesh_action.action_code))) + break; + if (!ieee80211_vif_is_mesh(&sdata->vif)) break; if (mesh_action_is_path_sel(mgmt) && diff --git a/net/wireless/util.c b/net/wireless/util.c index 45a09de..2762e83 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -309,7 +309,7 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) } EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); -static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) +unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) { int ae = meshhdr->flags & MESH_FLAGS_AE; /* 802.11-2012, 8.2.4.7.3 */ @@ -323,6 +323,7 @@ static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) return 18; } } +EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype) -- cgit v0.10.2 From 6dbda2d00d466225f9db1dc695ff852443f28832 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:41:23 +0200 Subject: mac80211: make sure data is accessible in EAPOL check The code to allow EAPOL frames even when the station isn't yet marked associated needs to check that the incoming frame is long enough and due to paged RX it also can't assume skb->data contains the right data, it must use skb_copy_bits(). Fix this to avoid using data that doesn't really exist. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 265a032d..00ade7f 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -888,14 +888,16 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx) */ if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION && ieee80211_is_data_present(hdr->frame_control)) { - u16 ethertype; - u8 *payload; - - payload = rx->skb->data + - ieee80211_hdrlen(hdr->frame_control); - ethertype = (payload[6] << 8) | payload[7]; - if (cpu_to_be16(ethertype) == - rx->sdata->control_port_protocol) + unsigned int hdrlen; + __be16 ethertype; + + hdrlen = ieee80211_hdrlen(hdr->frame_control); + + if (rx->skb->len < hdrlen + 8) + return RX_DROP_MONITOR; + + skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2); + if (ethertype == rx->sdata->control_port_protocol) return RX_CONTINUE; } -- cgit v0.10.2 From e13d5fef88c40b87c8430f8274c3a9ca32ef90bc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 26 Oct 2012 15:35:45 -0700 Subject: target: Fix double-free of se_cmd in target_complete_tmr_failure Fabric drivers currently expect to internally release se_cmd in the event of a TMR failure during target_submit_tmr(), which means the immediate call to transport_generic_free_cmd() after TFO->queue_tm_rsp() from within target_complete_tmr_failure() workqueue context is wrong. This is done as some fabrics expect TMR operations to be acknowledged before releasing the descriptor, so the assumption that core is releasing se_cmd associated TMR memory is incorrect. This fixes a OOPs where transport_generic_free_cmd() was being called more than once. This bug was originally observed with tcm_qla2xxx fabric ports. Cc: Christoph Hellwig Cc: Roland Dreier Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c33baff..9097155 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1616,7 +1616,6 @@ static void target_complete_tmr_failure(struct work_struct *work) se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST; se_cmd->se_tfo->queue_tm_rsp(se_cmd); - transport_generic_free_cmd(se_cmd, 0); } /** -- cgit v0.10.2 From 1a1ff38c4cebf23be8bf0009a76b082a13bd25cb Mon Sep 17 00:00:00 2001 From: Bernhard Kohl Date: Wed, 24 Oct 2012 15:53:58 +0200 Subject: target: reintroduce some obsolete SCSI-2 commands With kernel 3.6 some obsolete SCSI-2 commands including SEEK_10 have have been removed by commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f "target: move code for CDB emulation". There are still clients out there which use these old SCSI-2 commands. This mainly happens when running VMs with legacy guest systems, connected via SCSI command pass-through to iSCSI targets. Make them happy and return status GOOD. Many real SCSI disks or external iSCSI storage devices still support these old commands. So let's make LIO backward compatible as well. This patch adds support for the previously removed SEEK_10 and additionally the SEEK_6 and REZERO_UNIT commands. Signed-off-by: Bernhard Kohl Reviewed-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 868f8aa..a6e27d9 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -135,6 +135,12 @@ static int sbc_emulate_verify(struct se_cmd *cmd) return 0; } +static int sbc_emulate_noop(struct se_cmd *cmd) +{ + target_complete_cmd(cmd, GOOD); + return 0; +} + static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors) { return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors; @@ -531,6 +537,18 @@ int sbc_parse_cdb(struct se_cmd *cmd, struct spc_ops *ops) size = 0; cmd->execute_cmd = sbc_emulate_verify; break; + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + /* + * There are still clients out there which use these old SCSI-2 + * commands. This mainly happens when running VMs with legacy + * guest systems, connected via SCSI command pass-through to + * iSCSI targets. Make them happy and return status GOOD. + */ + size = 0; + cmd->execute_cmd = sbc_emulate_noop; + break; default: ret = spc_parse_cdb(cmd, &size); if (ret) -- cgit v0.10.2 From 0654f4ab2baa6100dc6b0b26f4f1fa3f02d10245 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 26 Oct 2012 22:49:09 +0200 Subject: ARM: at91: fix at91x40 build patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: Arnd Bergmann Acked-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300..bb7f544 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } -- cgit v0.10.2 From e09348c7570656c4d4a60e1e168ac5febe9b3f11 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 23 Oct 2012 10:17:49 +0200 Subject: ARM: mvebu: update defconfig with 3.7 changes The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850..3458752 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -- cgit v0.10.2 From 5b627ba0f549856486e8fd8e924ded8290e894f4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 26 Oct 2012 23:06:43 +0200 Subject: ARM: versatile: fix versatile_defconfig With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: Arnd Bergmann diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2b..2ba9e63 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -- cgit v0.10.2 From 943bb48755a7f70ee36e029904ed8b679bb1da58 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 27 Oct 2012 17:41:13 +0200 Subject: Revert "ARM i.MX25: Fix PWM per clock lookups" This reverts commit 92063cee118655d25b50d04eb77b012f3287357a, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 840fdfa..01e2f84 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -203,13 +203,13 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0"); - clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.0"); + clk_register_clkdev(clk[per10], "per", "mxc_pwm.0"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1"); - clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.1"); + clk_register_clkdev(clk[per10], "per", "mxc_pwm.1"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2"); - clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.2"); + clk_register_clkdev(clk[per10], "per", "mxc_pwm.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3"); - clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.3"); + clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0"); -- cgit v0.10.2 From c9c55d9211150b589d2d39a45cf5f96c70a51a47 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 26 Oct 2012 14:26:04 -0500 Subject: gpio/omap: fix off-mode bug: clear debounce settings on free/reset This change was originally titled "gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset". The title has been updated slightly to reflect (what should be) the final fix. When a GPIO is freed or shutdown, we need to ensure that any debounce settings are cleared and if the GPIO is the only GPIO in the bank that is currently using debounce, then disable the debounce clock as well to save power. Currently, the debounce settings are not cleared on a GPIO free or shutdown and so during a context restore on subsequent off-mode transition, the previous debounce values are restored from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix this, introduce a new function called _clear_gpio_debounce() to clear any debounce settings when the GPIO is freed or shutdown. If this GPIO is the last debounce-enabled GPIO in the bank, the debounce will also be cut. Please note that we cannot use _gpio_dbck_disable() to disable the debounce clock because this has been specifically created for the gpio suspend path and is intended to shutdown the debounce clock while debounce is enabled. Special thanks to Kevin Hilman for root causing the bug. This fix is a collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and Santosh Shilimkar. Testing: - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio, enabling debounce and then freeing the gpio and checking the register contents, the saved register context and the debounce clock state. - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the ads7846 touchscreen in its board file using the above sequence, and so was failing off-mode tests in dynamic idle. Verified that off-mode tests are passing with this patch. V5 changes: - Corrected author Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Cc: Jon Hunter Signed-off-by: Jon Hunter Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc84..d335af1 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, } } +/** + * _clear_gpio_debounce - clear debounce settings for a gpio + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * + * If a gpio is using debounce, then clear the debounce enable bit and if + * this is the only gpio in this bank using debounce, then clear the debounce + * time too. The debounce clock will also be disabled when calling this function + * if this is the only gpio in the bank using debounce. + */ +static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio) +{ + u32 gpio_bit = GPIO_BIT(bank, gpio); + + if (!bank->dbck_flag) + return; + + if (!(bank->dbck_enable_mask & gpio_bit)) + return; + + bank->dbck_enable_mask &= ~gpio_bit; + bank->context.debounce_en &= ~gpio_bit; + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + + if (!bank->dbck_enable_mask) { + bank->context.debounce = 0; + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, unsigned trigger) { @@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + _clear_gpio_debounce(bank, gpio); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -- cgit v0.10.2 From 257d36fd696d76b622539c26af652d2a8a931ce9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Oct 2012 09:31:02 -0700 Subject: ASoC: zoom2: Fix compile error by including correct header files Also drop the includes that are no longer needed and just cause problems for the ARM common zImage. Acked-by: Peter Ujfalusi Signed-off-by: Tim Gardner [tony@atomide.com: updated to drop unneeded headers] Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index 677b567..1ff6bb9 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -21,15 +21,14 @@ #include #include +#include #include #include #include #include -#include -#include -#include #include +#include /* Register descriptions for twl4030 codec part */ #include -- cgit v0.10.2 From 19118eb8dc3cd6bb1b1fdf0e4ad62070c6683158 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 26 Oct 2012 12:33:08 +0200 Subject: ASoC: omap-dmic: Correct functional clock name We should really use "fck" when asking for the functional clock and not "dmic_fck". This way we can ensure that multiple dmic modules can exist in the system. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c index 68f2cd1..5a6aeaf 100644 --- a/sound/soc/omap/omap-dmic.c +++ b/sound/soc/omap/omap-dmic.c @@ -464,9 +464,9 @@ static __devinit int asoc_dmic_probe(struct platform_device *pdev) mutex_init(&dmic->mutex); - dmic->fclk = clk_get(dmic->dev, "dmic_fck"); + dmic->fclk = clk_get(dmic->dev, "fck"); if (IS_ERR(dmic->fclk)) { - dev_err(dmic->dev, "cant get dmic_fck\n"); + dev_err(dmic->dev, "cant get fck\n"); return -ENODEV; } -- cgit v0.10.2 From 5c1eabe68501d1e1b1586c7f4c46cc531828c4ab Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Mon, 22 Oct 2012 19:37:47 -0400 Subject: percpu-rw-semaphores: use light/heavy barriers This patch introduces new barrier pair light_mb() and heavy_mb() for percpu rw semaphores. This patch fixes a bug in percpu-rw-semaphores where a barrier was missing in percpu_up_write. This patch improves performance on the read path of percpu-rw-semaphores: on non-x86 cpus, there was a smp_mb() in percpu_up_read. This patch changes it to a compiler barrier and removes the "#if defined(X86) ..." condition. From: Lai Jiangshan Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index cf80f7e..18f35b5 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -12,6 +12,9 @@ struct percpu_rw_semaphore { struct mutex mtx; }; +#define light_mb() barrier() +#define heavy_mb() synchronize_sched() + static inline void percpu_down_read(struct percpu_rw_semaphore *p) { rcu_read_lock(); @@ -24,22 +27,12 @@ static inline void percpu_down_read(struct percpu_rw_semaphore *p) } this_cpu_inc(*p->counters); rcu_read_unlock(); + light_mb(); /* A, between read of p->locked and read of data, paired with D */ } static inline void percpu_up_read(struct percpu_rw_semaphore *p) { - /* - * On X86, write operation in this_cpu_dec serves as a memory unlock - * barrier (i.e. memory accesses may be moved before the write, but - * no memory accesses are moved past the write). - * On other architectures this may not be the case, so we need smp_mb() - * there. - */ -#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE)) - barrier(); -#else - smp_mb(); -#endif + light_mb(); /* B, between read of the data and write to p->counter, paired with C */ this_cpu_dec(*p->counters); } @@ -61,11 +54,12 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p) synchronize_rcu(); while (__percpu_count(p->counters)) msleep(1); - smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */ + heavy_mb(); /* C, between read of p->counter and write to data, paired with B */ } static inline void percpu_up_write(struct percpu_rw_semaphore *p) { + heavy_mb(); /* D, between write to data and write to p->locked, paired with A */ p->locked = false; mutex_unlock(&p->mtx); } -- cgit v0.10.2 From 1bf11c53535ab87e3bf14ecdf6747bf46f601c5d Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Mon, 22 Oct 2012 19:39:16 -0400 Subject: percpu-rw-semaphores: use rcu_read_lock_sched Use rcu_read_lock_sched / rcu_read_unlock_sched / synchronize_sched instead of rcu_read_lock / rcu_read_unlock / synchronize_rcu. This is an optimization. The RCU-protected region is very small, so there will be no latency problems if we disable preempt in this region. So we use rcu_read_lock_sched / rcu_read_unlock_sched that translates to preempt_disable / preempt_disable. It is smaller (and supposedly faster) than preemptible rcu_read_lock / rcu_read_unlock. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index 18f35b5..250a4ac 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -17,16 +17,16 @@ struct percpu_rw_semaphore { static inline void percpu_down_read(struct percpu_rw_semaphore *p) { - rcu_read_lock(); + rcu_read_lock_sched(); if (unlikely(p->locked)) { - rcu_read_unlock(); + rcu_read_unlock_sched(); mutex_lock(&p->mtx); this_cpu_inc(*p->counters); mutex_unlock(&p->mtx); return; } this_cpu_inc(*p->counters); - rcu_read_unlock(); + rcu_read_unlock_sched(); light_mb(); /* A, between read of p->locked and read of data, paired with D */ } @@ -51,7 +51,7 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p) { mutex_lock(&p->mtx); p->locked = true; - synchronize_rcu(); + synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */ while (__percpu_count(p->counters)) msleep(1); heavy_mb(); /* C, between read of p->counter and write to data, paired with B */ -- cgit v0.10.2 From 1a25b1c4ce189e3926f2981f3302352a930086db Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Mon, 15 Oct 2012 17:20:17 -0400 Subject: Lock splice_read and splice_write functions Functions generic_file_splice_read and generic_file_splice_write access the pagecache directly. For block devices these functions must be locked so that block size is not changed while they are in progress. This patch is an additional fix for commit b87570f5d349 ("Fix a crash when block device is read and block size is changed at the same time") that locked aio_read, aio_write and mmap against block size change. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index b3c1d3d..1a1e5e3 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1661,6 +1661,39 @@ static int blkdev_mmap(struct file *file, struct vm_area_struct *vma) return ret; } +static ssize_t blkdev_splice_read(struct file *file, loff_t *ppos, + struct pipe_inode_info *pipe, size_t len, + unsigned int flags) +{ + ssize_t ret; + struct block_device *bdev = I_BDEV(file->f_mapping->host); + + percpu_down_read(&bdev->bd_block_size_semaphore); + + ret = generic_file_splice_read(file, ppos, pipe, len, flags); + + percpu_up_read(&bdev->bd_block_size_semaphore); + + return ret; +} + +static ssize_t blkdev_splice_write(struct pipe_inode_info *pipe, + struct file *file, loff_t *ppos, size_t len, + unsigned int flags) +{ + ssize_t ret; + struct block_device *bdev = I_BDEV(file->f_mapping->host); + + percpu_down_read(&bdev->bd_block_size_semaphore); + + ret = generic_file_splice_write(pipe, file, ppos, len, flags); + + percpu_up_read(&bdev->bd_block_size_semaphore); + + return ret; +} + + /* * Try to release a page associated with block device when the system * is under memory pressure. @@ -1699,8 +1732,8 @@ const struct file_operations def_blk_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = compat_blkdev_ioctl, #endif - .splice_read = generic_file_splice_read, - .splice_write = generic_file_splice_write, + .splice_read = blkdev_splice_read, + .splice_write = blkdev_splice_write, }; int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg) -- cgit v0.10.2 From 8f0d8163b50e01f398b14bcd4dc039ac5ab18d64 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 28 Oct 2012 12:24:48 -0700 Subject: Linux 3.7-rc3 diff --git a/Makefile b/Makefile index 14c93b3..42d0e56 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v0.10.2 From 31d178bffcff4c468c8c65bc42d9f4c0a7b8e3ec Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:00 +0100 Subject: i2c-stub: Move to drivers/i2c Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry. This is less confusing that way. I also fixed all checkpatch warnings and errors. Signed-off-by: Jean Delvare Cc: Peter Huewe diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index beee6b2..1722f50 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o obj-y += algos/ busses/ muxes/ +obj-$(CONFIG_I2C_STUB) += i2c-stub.o ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG CFLAGS_i2c-core.o := -Wno-deprecated-declarations diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2d33d62..395b516 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o -obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c deleted file mode 100644 index b1b34479..0000000 --- a/drivers/i2c/busses/i2c-stub.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - i2c-stub.c - I2C/SMBus chip emulator - - Copyright (c) 2004 Mark M. Hoffman - Copyright (C) 2007 Jean Delvare - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG 1 - -#include -#include -#include -#include -#include -#include - -#define MAX_CHIPS 10 -#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK) - -static unsigned short chip_addr[MAX_CHIPS]; -module_param_array(chip_addr, ushort, NULL, S_IRUGO); -MODULE_PARM_DESC(chip_addr, - "Chip addresses (up to 10, between 0x03 and 0x77)"); - -static unsigned long functionality = STUB_FUNC; -module_param(functionality, ulong, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(functionality, "Override functionality bitfield"); - -struct stub_chip { - u8 pointer; - u16 words[256]; /* Byte operations use the LSB as per SMBus - specification */ -}; - -static struct stub_chip *stub_chips; - -/* Return negative errno on error. */ -static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) -{ - s32 ret; - int i, len; - struct stub_chip *chip = NULL; - - /* Search for the right chip */ - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (addr == chip_addr[i]) { - chip = stub_chips + i; - break; - } - } - if (!chip) - return -ENODEV; - - switch (size) { - - case I2C_SMBUS_QUICK: - dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); - ret = 0; - break; - - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_WRITE) { - chip->pointer = command; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "wrote 0x%02x.\n", - addr, command); - } else { - data->byte = chip->words[chip->pointer++] & 0xff; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "read 0x%02x.\n", - addr, data->byte); - } - - ret = 0; - break; - - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] &= 0xff00; - chip->words[command] |= data->byte; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "wrote 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } else { - data->byte = chip->words[command] & 0xff; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "read 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } - chip->pointer = command + 1; - - ret = 0; - break; - - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] = data->word; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "wrote 0x%04x at 0x%02x.\n", - addr, data->word, command); - } else { - data->word = chip->words[command]; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "read 0x%04x at 0x%02x.\n", - addr, data->word, command); - } - - ret = 0; - break; - - case I2C_SMBUS_I2C_BLOCK_DATA: - len = data->block[0]; - if (read_write == I2C_SMBUS_WRITE) { - for (i = 0; i < len; i++) { - chip->words[command + i] &= 0xff00; - chip->words[command + i] |= data->block[1 + i]; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "wrote %d bytes at 0x%02x.\n", - addr, len, command); - } else { - for (i = 0; i < len; i++) { - data->block[1 + i] = - chip->words[command + i] & 0xff; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "read %d bytes at 0x%02x.\n", - addr, len, command); - } - - ret = 0; - break; - - default: - dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); - ret = -EOPNOTSUPP; - break; - } /* switch (size) */ - - return ret; -} - -static u32 stub_func(struct i2c_adapter *adapter) -{ - return STUB_FUNC & functionality; -} - -static const struct i2c_algorithm smbus_algorithm = { - .functionality = stub_func, - .smbus_xfer = stub_xfer, -}; - -static struct i2c_adapter stub_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, - .name = "SMBus stub driver", -}; - -static int __init i2c_stub_init(void) -{ - int i, ret; - - if (!chip_addr[0]) { - printk(KERN_ERR "i2c-stub: Please specify a chip address\n"); - return -ENODEV; - } - - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { - printk(KERN_ERR "i2c-stub: Invalid chip address " - "0x%02x\n", chip_addr[i]); - return -EINVAL; - } - - printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", - chip_addr[i]); - } - - /* Allocate memory for all chips at once */ - stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); - if (!stub_chips) { - printk(KERN_ERR "i2c-stub: Out of memory\n"); - return -ENOMEM; - } - - ret = i2c_add_adapter(&stub_adapter); - if (ret) - kfree(stub_chips); - return ret; -} - -static void __exit i2c_stub_exit(void) -{ - i2c_del_adapter(&stub_adapter); - kfree(stub_chips); -} - -MODULE_AUTHOR("Mark M. Hoffman "); -MODULE_DESCRIPTION("I2C stub driver"); -MODULE_LICENSE("GPL"); - -module_init(i2c_stub_init); -module_exit(i2c_stub_exit); - diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c new file mode 100644 index 0000000..d0a9c59 --- /dev/null +++ b/drivers/i2c/i2c-stub.c @@ -0,0 +1,220 @@ +/* + i2c-stub.c - I2C/SMBus chip emulator + + Copyright (c) 2004 Mark M. Hoffman + Copyright (C) 2007, 2012 Jean Delvare + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define DEBUG 1 + +#include +#include +#include +#include +#include +#include + +#define MAX_CHIPS 10 +#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK) + +static unsigned short chip_addr[MAX_CHIPS]; +module_param_array(chip_addr, ushort, NULL, S_IRUGO); +MODULE_PARM_DESC(chip_addr, + "Chip addresses (up to 10, between 0x03 and 0x77)"); + +static unsigned long functionality = STUB_FUNC; +module_param(functionality, ulong, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(functionality, "Override functionality bitfield"); + +struct stub_chip { + u8 pointer; + u16 words[256]; /* Byte operations use the LSB as per SMBus + specification */ +}; + +static struct stub_chip *stub_chips; + +/* Return negative errno on error. */ +static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data *data) +{ + s32 ret; + int i, len; + struct stub_chip *chip = NULL; + + /* Search for the right chip */ + for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { + if (addr == chip_addr[i]) { + chip = stub_chips + i; + break; + } + } + if (!chip) + return -ENODEV; + + switch (size) { + + case I2C_SMBUS_QUICK: + dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); + ret = 0; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) { + chip->pointer = command; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, wrote 0x%02x.\n", + addr, command); + } else { + data->byte = chip->words[chip->pointer++] & 0xff; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, read 0x%02x.\n", + addr, data->byte); + } + + ret = 0; + break; + + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_WRITE) { + chip->words[command] &= 0xff00; + chip->words[command] |= data->byte; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } else { + data->byte = chip->words[command] & 0xff; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } + chip->pointer = command + 1; + + ret = 0; + break; + + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_WRITE) { + chip->words[command] = data->word; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n", + addr, data->word, command); + } else { + data->word = chip->words[command]; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n", + addr, data->word, command); + } + + ret = 0; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + len = data->block[0]; + if (read_write == I2C_SMBUS_WRITE) { + for (i = 0; i < len; i++) { + chip->words[command + i] &= 0xff00; + chip->words[command + i] |= data->block[1 + i]; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n", + addr, len, command); + } else { + for (i = 0; i < len; i++) { + data->block[1 + i] = + chip->words[command + i] & 0xff; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n", + addr, len, command); + } + + ret = 0; + break; + + default: + dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); + ret = -EOPNOTSUPP; + break; + } /* switch (size) */ + + return ret; +} + +static u32 stub_func(struct i2c_adapter *adapter) +{ + return STUB_FUNC & functionality; +} + +static const struct i2c_algorithm smbus_algorithm = { + .functionality = stub_func, + .smbus_xfer = stub_xfer, +}; + +static struct i2c_adapter stub_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .algo = &smbus_algorithm, + .name = "SMBus stub driver", +}; + +static int __init i2c_stub_init(void) +{ + int i, ret; + + if (!chip_addr[0]) { + pr_err("i2c-stub: Please specify a chip address\n"); + return -ENODEV; + } + + for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { + if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { + pr_err("i2c-stub: Invalid chip address 0x%02x\n", + chip_addr[i]); + return -EINVAL; + } + + pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]); + } + + /* Allocate memory for all chips at once */ + stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); + if (!stub_chips) { + pr_err("i2c-stub: Out of memory\n"); + return -ENOMEM; + } + + ret = i2c_add_adapter(&stub_adapter); + if (ret) + kfree(stub_chips); + return ret; +} + +static void __exit i2c_stub_exit(void) +{ + i2c_del_adapter(&stub_adapter); + kfree(stub_chips); +} + +MODULE_AUTHOR("Mark M. Hoffman "); +MODULE_DESCRIPTION("I2C stub driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_stub_init); +module_exit(i2c_stub_exit); -- cgit v0.10.2 From 79e3e5b894926d3c7b1efc69e0c5be723ceb88bd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: i2c-i801: Simplify dependency towards GPIOLIB Arbitrarily selecting GPIOLIB causes trouble on some architectures, so don't do that. Instead, just make the optional multiplexing code depend on CONFIG_I2C_MUX_GPIO instead of CONFIG_I2C_MUX for now. We can revisit if the i2c-i801 driver ever supports other multiplexing flavors. Also make that optional code depend on DMI, as it won't do anything without that. Signed-off-by: Jean Delvare Cc: Fengguang Wu diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 65dd599..e9df461 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -81,7 +81,6 @@ config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI select CHECK_SIGNATURE if X86 && DMI - select GPIOLIB if I2C_MUX help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3779315..3bc3f73 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -82,7 +82,8 @@ #include #include -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI #include #include #include @@ -192,7 +193,8 @@ struct i801_priv { int len; u8 *data; -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI const struct i801_mux_config *mux_drvdata; struct platform_device *mux_pdev; #endif @@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {} static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} #endif /* CONFIG_X86 && CONFIG_DMI */ -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI static struct i801_mux_config i801_mux_config_asus_z8_d12 = { .gpio_chip = "gpio_ich", .values = { 0x02, 0x03 }, -- cgit v0.10.2 From 28901f579486a69cfdf7f294a3b5a97b173fb74a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: i2c-i801: Fix comment Signed-off-by: Jean Delvare diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3bc3f73..6abc00d 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1062,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv) id = dmi_first_match(mux_dmi_table); if (id) { - /* Remove from branch classes from trunk */ + /* Remove branch classes from trunk */ mux_config = id->driver_data; for (i = 0; i < mux_config->n_values; i++) class &= ~mux_config->classes[i]; -- cgit v0.10.2 From 38fe36a248ec3228f8e6507955d7ceb0432d2000 Mon Sep 17 00:00:00 2001 From: Ulrich Weber Date: Thu, 25 Oct 2012 05:34:45 +0000 Subject: netfilter: nf_nat: don't check for port change on ICMP tuples ICMP tuples have id in src and type/code in dst. So comparing src.u.all with dst.u.all will always fail here and ip_xfrm_me_harder() is called for every ICMP packet, even if there was no NAT. Signed-off-by: Ulrich Weber Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/iptable_nat.c b/net/ipv4/netfilter/iptable_nat.c index 9e0ffaf..a820472 100644 --- a/net/ipv4/netfilter/iptable_nat.c +++ b/net/ipv4/netfilter/iptable_nat.c @@ -184,7 +184,8 @@ nf_nat_ipv4_out(unsigned int hooknum, if ((ct->tuplehash[dir].tuple.src.u3.ip != ct->tuplehash[!dir].tuple.dst.u3.ip) || - (ct->tuplehash[dir].tuple.src.u.all != + (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP && + ct->tuplehash[dir].tuple.src.u.all != ct->tuplehash[!dir].tuple.dst.u.all)) if (nf_xfrm_me_harder(skb, AF_INET) < 0) ret = NF_DROP; @@ -221,6 +222,7 @@ nf_nat_ipv4_local_fn(unsigned int hooknum, } #ifdef CONFIG_XFRM else if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) && + ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP && ct->tuplehash[dir].tuple.dst.u.all != ct->tuplehash[!dir].tuple.src.u.all) if (nf_xfrm_me_harder(skb, AF_INET) < 0) diff --git a/net/ipv6/netfilter/ip6table_nat.c b/net/ipv6/netfilter/ip6table_nat.c index e418bd6..d57dab1 100644 --- a/net/ipv6/netfilter/ip6table_nat.c +++ b/net/ipv6/netfilter/ip6table_nat.c @@ -186,7 +186,8 @@ nf_nat_ipv6_out(unsigned int hooknum, if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3) || - (ct->tuplehash[dir].tuple.src.u.all != + (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 && + ct->tuplehash[dir].tuple.src.u.all != ct->tuplehash[!dir].tuple.dst.u.all)) if (nf_xfrm_me_harder(skb, AF_INET6) < 0) ret = NF_DROP; @@ -222,6 +223,7 @@ nf_nat_ipv6_local_fn(unsigned int hooknum, } #ifdef CONFIG_XFRM else if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) && + ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 && ct->tuplehash[dir].tuple.dst.u.all != ct->tuplehash[!dir].tuple.src.u.all) if (nf_xfrm_me_harder(skb, AF_INET6)) -- cgit v0.10.2 From f1df1374dc83d62588667e566e959df384718ad1 Mon Sep 17 00:00:00 2001 From: Hein Tibosch Date: Fri, 26 Oct 2012 23:49:26 +0000 Subject: netfilter: nf_defrag_ipv6: solve section mismatch in nf_conntrack_reasm WARNING: net/ipv6/netfilter/nf_defrag_ipv6.o(.text+0xe0): Section mismatch in reference from the function nf_ct_net_init() to the function .init.text:nf_ct_frag6_sysctl_register() The function nf_ct_net_init() references the function __init nf_ct_frag6_sysctl_register(). In case nf_conntrack_ipv6 is compiled as a module, nf_ct_net_init could be called after the init code and data are unloaded. Therefore remove the "__net_init" annotation from nf_ct_frag6_sysctl_register(). Signed-off-by: Hein Tibosch Acked-by: Cong Wang Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 18bd9bb..22c8ea9 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -85,7 +85,7 @@ static struct ctl_table nf_ct_frag6_sysctl_table[] = { { } }; -static int __net_init nf_ct_frag6_sysctl_register(struct net *net) +static int nf_ct_frag6_sysctl_register(struct net *net) { struct ctl_table *table; struct ctl_table_header *hdr; @@ -127,7 +127,7 @@ static void __net_exit nf_ct_frags6_sysctl_unregister(struct net *net) } #else -static int __net_init nf_ct_frag6_sysctl_register(struct net *net) +static int nf_ct_frag6_sysctl_register(struct net *net) { return 0; } -- cgit v0.10.2 From ffb5387e85d528fb6d0d924abfa3fbf0fc484071 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sun, 28 Oct 2012 22:24:57 -0400 Subject: ext4: fix unjournaled inode bitmap modification commit 119c0d4460b001e44b41dcf73dc6ee794b98bd31 changed ext4_new_inode() such that the inode bitmap was being modified outside a transaction, which could lead to corruption, and was discovered when journal_checksum found a bad checksum in the journal during log replay. Nix ran into this when using the journal_async_commit mount option, which enables journal checksumming. The ensuing journal replay failures due to the bad checksums led to filesystem corruption reported as the now infamous "Apparent serious progressive ext4 data corruption bug" [ Changed by tytso to only call ext4_journal_get_write_access() only when we're fairly certain that we're going to allocate the inode. ] I've tested this by mounting with journal_checksum and running fsstress then dropping power; I've also tested by hacking DM to create snapshots w/o first quiescing, which allows me to test journal replay repeatedly w/o actually power-cycling the box. Without the patch I hit a journal checksum error every time. With this fix it survives many iterations. Reported-by: Nix Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 4facdd2..3a100e7 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -725,6 +725,10 @@ repeat_in_this_group: "inode=%lu", ino + 1); continue; } + BUFFER_TRACE(inode_bitmap_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, inode_bitmap_bh); + if (err) + goto fail; ext4_lock_group(sb, group); ret2 = ext4_test_and_set_bit(ino, inode_bitmap_bh->b_data); ext4_unlock_group(sb, group); @@ -738,6 +742,11 @@ repeat_in_this_group: goto out; got: + BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh); + if (err) + goto fail; + /* We may have to initialize the block bitmap if it isn't already */ if (ext4_has_group_desc_csum(sb) && gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { @@ -771,11 +780,6 @@ got: goto fail; } - BUFFER_TRACE(inode_bitmap_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, inode_bitmap_bh); - if (err) - goto fail; - BUFFER_TRACE(group_desc_bh, "get_write_access"); err = ext4_journal_get_write_access(handle, group_desc_bh); if (err) @@ -823,11 +827,6 @@ got: } ext4_unlock_group(sb, group); - BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata"); - err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh); - if (err) - goto fail; - BUFFER_TRACE(group_desc_bh, "call ext4_handle_dirty_metadata"); err = ext4_handle_dirty_metadata(handle, NULL, group_desc_bh); if (err) -- cgit v0.10.2 From 52eb5a900a9863a8b77a895f770e5d825c8e02c6 Mon Sep 17 00:00:00 2001 From: David Zafman Date: Thu, 18 Oct 2012 14:01:43 -0700 Subject: ceph: fix dentry reference leak in encode_fh() Call to d_find_alias() needs a corresponding dput() This fixes http://tracker.newdream.net/issues/3271 Signed-off-by: David Zafman Reviewed-by: Sage Weil diff --git a/fs/ceph/export.c b/fs/ceph/export.c index 8e1b60e..8628870 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -90,6 +90,8 @@ static int ceph_encode_fh(struct inode *inode, u32 *rawfh, int *max_len, *max_len = handle_length; type = 255; } + if (dentry) + dput(dentry); return type; } -- cgit v0.10.2 From 5a8095e9d02da19f3bab738e82c0520ecd62d6af Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 11 Sep 2012 11:01:59 -0500 Subject: ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9f..e69c921 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76..3705a81 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 0000000..f624dc8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ff00017..c5337d4 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,12 @@ regulator-max-microvolt = <3150000>; }; + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; -- cgit v0.10.2 From efeedcf2a9137c9be0b833cb76b05315fe231197 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Fri, 31 Aug 2012 15:07:20 +0530 Subject: ARM: dts: AM33XX: Add device tree OPP table Add DT OPP table for AM33XX family of devices. This data is decoded by OF with of_init_opp_table() helper function. Also adds cpu0 supply name to the corresponding dts files. cpu0-supply name is used by cpufreq-cpu0 driver to get the regulator pointer for voltage modifications. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..91eee97 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -13,6 +13,12 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d632..4707cda 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -13,6 +13,12 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff..b4e3e47 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -25,6 +25,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; -- cgit v0.10.2 From b552dfc44bf4a34196b949bc81e937de461f4898 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Thu, 20 Sep 2012 02:49:26 +0530 Subject: ARM: dts: AM33XX: Add basic pinctrl device tree data Adds basic pinctrl device tree data for AM33XX family of devices. This patch is based on the pinctrl-single driver. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index b4e3e47..894fec6 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -55,6 +55,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since -- cgit v0.10.2 From 059b185d5345825519ee9fd4afcb349856c34363 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Thu, 20 Sep 2012 02:49:27 +0530 Subject: ARM: dts: AM33XX: Add D_CAN device tree data Add Bosch D_CAN controller device tree data to AM33XX dtsi file by adding d_can device nodes with all the necessary parameters. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 894fec6..64c2efe 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -234,5 +234,23 @@ interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; }; }; -- cgit v0.10.2 From 492dd024e49e92c9bdbaa9c9b5564f1a505687a0 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Thu, 20 Sep 2012 02:49:29 +0530 Subject: ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evm Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM lis331dlh accelerometer is connected to I2C2 bus. So this patch change the status of I2C2 node to "okay" to use I2C2 bus. Also added all the required platform data to am335x-evm. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 4707cda..d25d1b3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -37,6 +37,39 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <400000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; }; vbat: fixedregulator@0 { @@ -46,6 +79,12 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; }; /include/ "tps65910.dtsi" -- cgit v0.10.2 From bf078553e049b8874d3e26fc36e1e2cc14614187 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Thu, 20 Sep 2012 02:49:30 +0530 Subject: ARM: dts: AM33XX: Add temperature sensor device tree data to am335x-evm Add temperature sensor DT data to am335x-evm.dts. In AM335x EVM tmp275 temperature sensor is connected to I2C2 bus. So this patch adds child node inside i2c2 node with i2c slave address. This patch is tested on AM335x EVM. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d25d1b3..a5c4c62 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -69,6 +69,11 @@ st,max-limit-y = <550>; st,max-limit-z = <750>; }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; }; }; -- cgit v0.10.2 From cd5cfac26d00b4e00f785ee22dc54fb3ea203f6f Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Fri, 21 Sep 2012 21:19:11 +0530 Subject: ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT data In AM335x EVM tsl2550 ambient light sensor is connected to I2C2 bus. Add child node inside i2c2 node with i2c slave address. TAOS tsl2550 sensor is using a two-wire SMBus serial interface. Reduce I2C2 clock frequency to 100kHz from 400kHz because the maximum clock frequency of SMBus is 100kHz. Signed-off-by: AnilKumar Ch [b-cousson@ti.com: Clean the changelog] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a5c4c62..513284f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -40,7 +40,7 @@ i2c2: i2c@4802a000 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; lis331dlh: lis331dlh@18 { compatible = "st,lis331dlh", "st,lis3lv02d"; @@ -70,6 +70,11 @@ st,max-limit-z = <750>; }; + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + tmp275: tmp275@48 { compatible = "ti,tmp275"; reg = <0x48>; -- cgit v0.10.2 From 571ccb280a73dc39a5571f90ca5b845539d63950 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Mon, 15 Oct 2012 18:05:39 +0530 Subject: ARM: dts: Add am335x-evmsk.dts Add AM335X EVM-SK device tree source (am335x-sk.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Also adds support for tps65910 regulator and lis331dlh accelerometer. Following drivers/functionality were tested on AM335x-EVM-SK. * I2C * TPS65910 regulators * lis331dlh accelerometer AM335x EVM Starter Kit details can be accessed from: http://www.ti.com/tool/tmdssk3358 Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 0000000..6f53879 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; -- cgit v0.10.2 From 1c48ddbaa61aa017fefacac1bce233227933d18e Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Fri, 19 Oct 2012 12:28:56 +0530 Subject: Documentation: dt: i2c: Update trivial-devices list Update i2c trivial-devices list by adding the description for ti,tmp275 temperature sensor and taos,tsl2550 ambient light sensor. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 2f5322b..446859f 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -55,5 +55,7 @@ st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS +taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface +ti,tmp275 Digital Temperature Sensor -- cgit v0.10.2 From 6ff862f6a8bd54184f81fa36b9231b641607d2c0 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 19 Sep 2012 15:02:06 +0530 Subject: ARM: dts: Add twl6030-usb data Add twl6030-usb data node in twl6030 device tree file. twl6030-usb is the comparator driver for USB that detects VBUS and ID events. The dt data is comprised of two interrupts, one for ID and one for VBUS and a phandle to the regulator. Acked-by: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e8f927c..32baf65 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -184,3 +184,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04f..0f57bdf 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -406,3 +406,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 123e2c4..9996cfc 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; -- cgit v0.10.2 From c8de91a24d66507f7ed81d4077c27014d91ed4c6 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 19 Sep 2012 15:02:07 +0530 Subject: ARM: dts: Add twl4030-usb data Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index c5337d4..63411b0 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,18 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; @@ -50,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; -- cgit v0.10.2 From 3ce0a99cd4c23762441f0efb18c0e0ef1e9d8bfc Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 19 Sep 2012 16:02:51 +0530 Subject: ARM: dts: OMAP4: add *reg* property for ocp2scp *reg* property for ocp2scp was previously obtained from ti,hwmods property. But that is now explicitly added to the dt node. Also updated the documentation with *reg* info. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt index d2fe064..63dd805 100644 --- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -2,9 +2,27 @@ properties: - compatible : Should be "ti,omap-ocp2scp" +- reg : Address and length of the register set for the device - #address-cells, #size-cells : Must be present if the device has sub-nodes - ranges : the child address space are mapped 1:1 onto the parent address space - ti,hwmods : must be "ocp2scp_usb_phy" Sub-nodes: All the devices connected to ocp2scp are described using sub-node to ocp2scp + +ocp2scp@4a0ad000 { + compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + + subnode1 { + ... + }; + + subnode2 { + ... + }; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3883f94..812461e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -431,8 +431,9 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; -- cgit v0.10.2 From 4c94ac29b5c1f0cef2281df97609f2cbcc09cf9c Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 24 Oct 2012 10:47:52 +0200 Subject: ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplication The interrupt-parent attribute does not have to be added in each node since the fmwk will check for the parent as well to get it. Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the attributes from every nodes that were using it. Signed-off-by: Benoit Cousson Cc: Vaibhav Hiremath Cc: Peter Ujfalusi Cc: Sebastien Guiriec diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 64c2efe..4709269 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -94,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -106,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -118,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -130,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -139,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -149,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -159,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -169,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -179,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -189,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -200,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -211,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -222,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -231,7 +219,6 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; @@ -240,7 +227,6 @@ ti,hwmods = "d_can0"; reg = <0x481cc000 0x2000>; interrupts = <52>; - interrupt-parent = <&intc>; status = "disabled"; }; @@ -249,7 +235,6 @@ ti,hwmods = "d_can1"; reg = <0x481d0000 0x2000>; interrupts = <55>; - interrupt-parent = <&intc>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 581cb08..f366482 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index bfd76b4..4d5ce91 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -30,7 +30,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,7 +40,6 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 4565d97..fa84532 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -32,7 +32,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +44,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +56,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +68,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,7 +80,6 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 696e929..fa15541 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -240,7 +241,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,7 +255,6 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; @@ -270,7 +269,6 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; @@ -283,7 +281,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,7 +293,6 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 812461e..2ab6e68 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -340,7 +340,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +349,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +359,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +370,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +381,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +391,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 42c78be..61a4f2e 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -287,7 +287,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +296,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +306,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +317,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,7 +328,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; -- cgit v0.10.2 From fab8ad0b2b5f2b6d25c6020a61bf3339e53fec61 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 19 Oct 2012 09:59:00 -0500 Subject: ARM: dts: OMAP: Add timer nodes Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter Acked-Reviewed-&-Tested-By: Vaibhav Hiremath Signed-off-by: Benoit Cousson diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt new file mode 100644 index 0000000..8732d4d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/timer.txt @@ -0,0 +1,31 @@ +OMAP Timer bindings + +Required properties: +- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers. +- reg: Contains timer register address range (base address and + length). +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the OMAP device uses. +- ti,hwmods: Name of the hwmod associated to the timer, "timer", + where is the instance number of the timer from the + HW spec. + +Optional properties: +- ti,timer-alwon: Indicates the timer is in an alway-on power domain. +- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in + addition to the ARM CPU. +- ti,timer-pwm: Indicates the timer can generate a PWM output. +- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device + and therefore cannot be used by the kernel. + +Example: + +timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12" + ti,timer-alwon; + ti,timer-secure; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 4709269..70d24b8 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -237,5 +237,59 @@ interrupts = <55>; status = "disabled"; }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f366482..761c4b6 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -66,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 4d5ce91..af5ee26 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -42,5 +42,13 @@ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index fa84532..6887298 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -83,5 +83,13 @@ ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index fa15541..af9b182 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -296,5 +296,100 @@ ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2ab6e68..d3a82e0 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -433,5 +433,91 @@ ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; -- cgit v0.10.2 From 510c0ffdd408ced2654f073d0397f0fec410a235 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 25 Oct 2012 14:24:14 -0500 Subject: ARM: dts: OMAP: Add counter-32k nodes Adds the counter-32k timers nodes present in OMAP2/3/4 devices and device-tree binding documentation for OMAP counter-32k. Signed-off-by: Jon Hunter Signed-off-by: Benoit Cousson diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt new file mode 100644 index 0000000..5bd8aa0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/counter.txt @@ -0,0 +1,15 @@ +OMAP Counter-32K bindings + +Required properties: +- compatible: Must be "ti,omap-counter32k" for OMAP controllers +- reg: Contains timer register address range (base address and length) +- ti,hwmods: Name of the hwmod associated to the counter, which is typically + "counter_32k" + +Example: + +counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index af5ee26..af65609 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 6887298..c392445 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index af9b182..1acc261 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -61,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index d3a82e0..23ee149 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; -- cgit v0.10.2 From f4b224f2b48e3a5203a25fe64ef46cc5c54e1604 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 23 Oct 2012 10:37:09 +0200 Subject: ARM: dts: omap5: Update GPIO with address space and interrupts Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 61a4f2e..4cd8acf 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -104,6 +104,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +115,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +126,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +137,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +148,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +159,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +170,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +181,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; -- cgit v0.10.2 From d7118bbd5095982ddc179387e9fd7d0524fdcf10 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 23 Oct 2012 10:37:10 +0200 Subject: ARM: dts: omap5: Update I2C with address space and interrupts Add base address and interrupt line inside Device Tree data for OMAP5 Signed-off-by: Sebastien Guiriec Reviewed-by: Shubhrajyoti D Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4cd8acf..9abcff7 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -192,6 +192,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -199,6 +201,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -206,20 +210,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; -- cgit v0.10.2 From 8e80f66069d54fd22e1a8e452a760f511f501b48 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 23 Oct 2012 10:37:11 +0200 Subject: ARM: dts: omap5: Update UART with address space and interrupts Add base address and interrupt line inside Device Tree data for OMAP5. Fix as well the wrong compatible string on UART5 & 6. Signed-off-by: Sebastien Guiriec Reviewed-by: Shubhrajyoti D [b-cousson@ti.com: Update the changelog to reflect the fixes done in the patch] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 9abcff7..7cc47ad 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -237,36 +237,48 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; -- cgit v0.10.2 From 9a6423621df893512fd3aeb0e11ca9015c8fba15 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 23 Oct 2012 10:37:12 +0200 Subject: ARM: dts: omap5: Update MMC with address space and interrupts Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cc47ad..930dbfe 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -285,6 +285,8 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -292,24 +294,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; -- cgit v0.10.2 From 00cbdce75b62a56bf3e6baca68b5ddb5474495a2 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 24 Oct 2012 12:31:34 +0200 Subject: ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e69c921..634bd42 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -68,8 +68,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts new file mode 100644 index 0000000..d4ba43a --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts deleted file mode 100644 index d4ba43a..0000000 --- a/arch/arm/boot/dts/omap4-pandaES.dts +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/include/ "omap4-panda.dts" - -/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ -&sound { - ti,model = "PandaBoardES"; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "AFML", "Line In", - "AFMR", "Line In"; -}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts new file mode 100644 index 0000000..6601e6a --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "Variscite OMAP4 SOM"; + compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11>; /* gpio line 171 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts deleted file mode 100644 index 6601e6a..0000000 --- a/arch/arm/boot/dts/omap4-var_som.dts +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -/include/ "omap4.dtsi" - -/ { - model = "Variscite OMAP4 SOM"; - compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - vdd_eth: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_ETH"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - regulator-boot-on; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf - */ - tmp105@49 { - compatible = "ti,tmp105"; - reg = <0x49>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mcspi1 { - eth@0 { - compatible = "ks8851"; - spi-max-frequency = <24000000>; - reg = <0>; - interrupt-parent = <&gpio6>; - interrupts = <11>; /* gpio line 171 */ - vdd-supply = <&vdd_eth>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - ti,bus-width = <8>; - ti,non-removable; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,bus-width = <4>; -}; -- cgit v0.10.2 From 8c6e30936a7893a85f6222084f0f26aceb81137a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 26 Oct 2012 00:31:11 +0200 Subject: ath9k: fix stale pointers potentially causing access to free'd skbs bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 378bd70..1ffca75 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -312,6 +312,7 @@ static struct ath_buf *ath_tx_get_buffer(struct ath_softc *sc) } bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list); + bf->bf_next = NULL; list_del(&bf->list); spin_unlock_bh(&sc->tx.txbuflock); @@ -1774,6 +1775,7 @@ static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, list_add_tail(&bf->list, &bf_head); bf->bf_state.bf_type = 0; + bf->bf_next = NULL; bf->bf_lastbf = bf; ath_tx_fill_desc(sc, bf, txq, fi->framelen); ath_tx_txqaddbuf(sc, txq, &bf_head, false); -- cgit v0.10.2 From d034fbf08b6fe86271d0d0bd332edabeb5749fd6 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 29 Oct 2012 18:50:47 +0100 Subject: hwmon, fam15h_power: Change email address, MAINTAINERS entry Signed-off-by: Andreas Herrmann Signed-off-by: Guenter Roeck diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index a92918e..8065481 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -10,7 +10,7 @@ Supported chips: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors (not yet published) -Author: Andreas Herrmann +Author: Andreas Herrmann Description ----------- diff --git a/MAINTAINERS b/MAINTAINERS index 1fa9074..a4e8136 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -503,7 +503,7 @@ F: include/linux/altera_uart.h F: include/linux/altera_jtaguart.h AMD FAM15H PROCESSOR POWER MONITORING DRIVER -M: Andreas Herrmann +M: Andreas Herrmann L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/fam15h_power diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 68ad7d2..4f41104 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -2,7 +2,7 @@ * fam15h_power.c - AMD Family 15h processor power monitoring * * Copyright (c) 2011 Advanced Micro Devices, Inc. - * Author: Andreas Herrmann + * Author: Andreas Herrmann * * * This driver is free software; you can redistribute it and/or @@ -28,7 +28,7 @@ #include MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor"); -MODULE_AUTHOR("Andreas Herrmann "); +MODULE_AUTHOR("Andreas Herrmann "); MODULE_LICENSE("GPL"); /* D18F3 */ -- cgit v0.10.2 From b216e12d062d060f2c7b1a49b4b6a6a442cae79c Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Mon, 29 Oct 2012 23:45:30 -0700 Subject: Input: wacom - correct bad Cintiq 24HD check Signed-off-by: Fengguang Wu Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c1e12b..858ad44 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf, features->pktlen = WACOM_PKGLEN_TPC2FG; } - if (features->type == MTSCREEN || WACOM_24HDT) + if (features->type == MTSCREEN || features->type == WACOM_24HDT) features->pktlen = WACOM_PKGLEN_MTOUCH; if (features->type == BAMBOO_PT) { -- cgit v0.10.2 From 904adede088f2a6976e417d1d5cf72c9fe686814 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 29 Oct 2012 23:45:09 -0700 Subject: Input: pxa27x_keypad - clear pending interrupts on keypad config Bootloader can leave interrupt bit pending, and it confuses driver. Signed-off-by: Vasily Khoruzhick Acked-by: Robert Jarzmik Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 803ff6f..cad9d5d 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) unsigned int mask = 0, direct_key_num = 0; unsigned long kpc = 0; + /* clear pending interrupt bit */ + keypad_readl(KPC); + /* enable matrix keys with automatic scan */ if (pdata->matrix_key_rows && pdata->matrix_key_cols) { kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; -- cgit v0.10.2 From e07577e1ddf6d2d31961df897e7ff05c0aeb8d0f Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 29 Oct 2012 22:30:56 -0700 Subject: Input: lpc32xx-keys - select INPUT_MATRIXKMAP This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP, as the other drivers are doing in this regard. This fixes the following compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not: drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to `matrix_keypad_build_keymap' Signed-off-by: Roland Stigge Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4b65af..de08740 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO config KEYBOARD_LPC32XX tristate "LPC32XX matrix key scanner support" depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP help Say Y here if you want to use NXP LPC32XX SoC key scanner interface, connected to a key matrix. -- cgit v0.10.2 From 2911758f14e36a7cd5c7367f951dcb8817552f71 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 13 Aug 2012 10:53:17 -0400 Subject: xen/blkback: Fix compile warning drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static? drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static? Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 4f66171..d0fed55 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -196,7 +196,7 @@ static void xen_blkif_disconnect(struct xen_blkif *blkif) } } -void xen_blkif_free(struct xen_blkif *blkif) +static void xen_blkif_free(struct xen_blkif *blkif) { if (!atomic_dec_and_test(&blkif->refcnt)) BUG(); @@ -257,7 +257,7 @@ static struct attribute_group xen_vbdstat_group = { VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor); VBD_SHOW(mode, "%s\n", be->mode); -int xenvbd_sysfs_addif(struct xenbus_device *dev) +static int xenvbd_sysfs_addif(struct xenbus_device *dev) { int error; @@ -281,7 +281,7 @@ fail1: device_remove_file(&dev->dev, &dev_attr_physical_device); return error; } -void xenvbd_sysfs_delif(struct xenbus_device *dev) +static void xenvbd_sysfs_delif(struct xenbus_device *dev) { sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group); device_remove_file(&dev->dev, &dev_attr_mode); -- cgit v0.10.2 From b54e1f88897bcacc2cd359f48ea3b39eaf55f084 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:51 -0300 Subject: floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop Since commit 070ad7e ("floppy: convert to delayed work and single-thread wq"), we end up calling alloc_ordered_workqueue multiple times inside the loop, which shouldn't be intended. Besides the leak, other side effect in the current code is if blk_init_queue fails, we would end up calling unregister_blkdev even if we didn't call yet register_blkdev. Just moved the allocation of floppy_wq before the loop, and adjusted the code accordingly. Cc: stable@vger.kernel.org # 3.5+ Acked-by: Vivek Goyal Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 17c675c..83112f0 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4137,6 +4137,10 @@ static int __init do_floppy_init(void) raw_cmd = NULL; + floppy_wq = alloc_ordered_workqueue("floppy", 0); + if (!floppy_wq) + return -ENOMEM; + for (dr = 0; dr < N_DRIVE; dr++) { disks[dr] = alloc_disk(1); if (!disks[dr]) { @@ -4144,16 +4148,10 @@ static int __init do_floppy_init(void) goto out_put_disk; } - floppy_wq = alloc_ordered_workqueue("floppy", 0); - if (!floppy_wq) { - err = -ENOMEM; - goto out_put_disk; - } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { err = -ENOMEM; - goto out_destroy_workq; + goto out_put_disk; } blk_queue_max_hw_sectors(disks[dr]->queue, 64); @@ -4317,8 +4315,6 @@ out_release_dma: out_unreg_region: blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); platform_driver_unregister(&floppy_driver); -out_destroy_workq: - destroy_workqueue(floppy_wq); out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: @@ -4334,6 +4330,7 @@ out_put_disk: } put_disk(disks[dr]); } + destroy_workqueue(floppy_wq); return err; } -- cgit v0.10.2 From 238ab78469c6ab7845b43d5061cd3c92331b2452 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:52 -0300 Subject: floppy: do put_disk on current dr if blk_init_queue fails If blk_init_queue fails, we do not call put_disk on the current dr (dr is decremented first in the error handling loop). Cc: stable@vger.kernel.org Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 83112f0..9a558b6 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4150,6 +4150,7 @@ static int __init do_floppy_init(void) disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { + put_disk(disks[dr]); err = -ENOMEM; goto out_put_disk; } -- cgit v0.10.2 From d60e7ec18c3fb2cbf90969ccd42889eb2d03aef9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:54 -0300 Subject: floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9a558b6..2c72573 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4292,7 +4292,7 @@ static int __init do_floppy_init(void) err = platform_device_register(&floppy_device[drive]); if (err) - goto out_release_dma; + goto out_remove_drives; err = device_create_file(&floppy_device[drive].dev, &dev_attr_cmos); @@ -4310,6 +4310,15 @@ static int __init do_floppy_init(void) out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); +out_remove_drives: + while (drive--) { + if ((allowed_drive_mask & (1 << drive)) && + fdc_state[FDC(drive)].version != FDC_NONE) { + del_gendisk(disks[drive]); + device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); + platform_device_unregister(&floppy_device[drive]); + } + } out_release_dma: if (atomic_read(&usage_count)) floppy_release_irq_and_dma(); -- cgit v0.10.2 From 8d3ab4ebfd7435bc248873de47d0ca23076c4973 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:55 -0300 Subject: floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 2c72573..d54b234 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4109,12 +4109,19 @@ static struct platform_driver floppy_driver = { static struct platform_device floppy_device[N_DRIVE]; +static bool floppy_available(int drive) +{ + if (!(allowed_drive_mask & (1 << drive))) + return false; + if (fdc_state[FDC(drive)].version == FDC_NONE) + return false; + return true; +} + static struct kobject *floppy_find(dev_t dev, int *part, void *data) { int drive = (*part & 3) | ((*part & 0x80) >> 5); - if (drive >= N_DRIVE || - !(allowed_drive_mask & (1 << drive)) || - fdc_state[FDC(drive)].version == FDC_NONE) + if (drive >= N_DRIVE || !floppy_available(drive)) return NULL; if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type)) return NULL; @@ -4281,9 +4288,7 @@ static int __init do_floppy_init(void) } for (drive = 0; drive < N_DRIVE; drive++) { - if (!(allowed_drive_mask & (1 << drive))) - continue; - if (fdc_state[FDC(drive)].version == FDC_NONE) + if (!floppy_available(drive)) continue; floppy_device[drive].name = floppy_device_name; @@ -4312,8 +4317,7 @@ out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); out_remove_drives: while (drive--) { - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); @@ -4558,8 +4562,7 @@ static void __exit floppy_module_exit(void) for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); -- cgit v0.10.2 From 1a4ae43e4feb570901667782678772fd31c1b125 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 30 Oct 2012 08:36:07 +0100 Subject: floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index d54b234..1c49d71 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4131,8 +4131,7 @@ static struct kobject *floppy_find(dev_t dev, int *part, void *data) static int __init do_floppy_init(void) { - int i, unit, drive; - int err, dr; + int i, unit, drive, err; set_debugt(); interruptjiffies = resultjiffies = jiffies; @@ -4148,29 +4147,28 @@ static int __init do_floppy_init(void) if (!floppy_wq) return -ENOMEM; - for (dr = 0; dr < N_DRIVE; dr++) { - disks[dr] = alloc_disk(1); - if (!disks[dr]) { + for (drive = 0; drive < N_DRIVE; drive++) { + disks[drive] = alloc_disk(1); + if (!disks[drive]) { err = -ENOMEM; goto out_put_disk; } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); - if (!disks[dr]->queue) { - put_disk(disks[dr]); + disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock); + if (!disks[drive]->queue) { err = -ENOMEM; goto out_put_disk; } - blk_queue_max_hw_sectors(disks[dr]->queue, 64); - disks[dr]->major = FLOPPY_MAJOR; - disks[dr]->first_minor = TOMINOR(dr); - disks[dr]->fops = &floppy_fops; - sprintf(disks[dr]->disk_name, "fd%d", dr); + blk_queue_max_hw_sectors(disks[drive]->queue, 64); + disks[drive]->major = FLOPPY_MAJOR; + disks[drive]->first_minor = TOMINOR(drive); + disks[drive]->fops = &floppy_fops; + sprintf(disks[drive]->disk_name, "fd%d", drive); - init_timer(&motor_off_timer[dr]); - motor_off_timer[dr].data = dr; - motor_off_timer[dr].function = motor_off_callback; + init_timer(&motor_off_timer[drive]); + motor_off_timer[drive].data = drive; + motor_off_timer[drive].function = motor_off_callback; } err = register_blkdev(FLOPPY_MAJOR, "fd"); @@ -4332,17 +4330,15 @@ out_unreg_region: out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: - while (dr--) { - del_timer_sync(&motor_off_timer[dr]); - if (disks[dr]->queue) { - blk_cleanup_queue(disks[dr]->queue); - /* - * put_disk() is not paired with add_disk() and - * will put queue reference one extra time. fix it. - */ - disks[dr]->queue = NULL; + for (drive = 0; drive < N_DRIVE; drive++) { + if (!disks[drive]) + break; + if (disks[drive]->queue) { + del_timer_sync(&motor_off_timer[drive]); + blk_cleanup_queue(disks[drive]->queue); + disks[drive]->queue = NULL; } - put_disk(disks[dr]); + put_disk(disks[drive]); } destroy_workqueue(floppy_wq); return err; -- cgit v0.10.2 From dbd4713348b6b7e4ce707060d1b92a457ab2e5fb Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 4 Sep 2012 11:07:38 +0200 Subject: pktcdvd: update MAINTAINERS Peter is not going to maintain the driver any more. I have the hardware. Acked-by: Peter Osterlund Signed-off-by: Jiri Kosina diff --git a/MAINTAINERS b/MAINTAINERS index 027ec2b..17f2e1c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5633,7 +5633,7 @@ S: Maintained F: drivers/pinctrl/spear/ PKTCDVD DRIVER -M: Peter Osterlund +M: Jiri Kosina S: Maintained F: drivers/block/pktcdvd.c F: include/linux/pktcdvd.h -- cgit v0.10.2 From 654dbef2146d6bc56886495d44b661148f016e62 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Aug 2012 12:28:57 +0800 Subject: xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index d0fed55..f58434c 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -105,11 +105,10 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid) { struct xen_blkif *blkif; - blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL); + blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL); if (!blkif) return ERR_PTR(-ENOMEM); - memset(blkif, 0, sizeof(*blkif)); blkif->domid = domid; spin_lock_init(&blkif->blk_ring_lock); atomic_set(&blkif->refcnt, 1); -- cgit v0.10.2 From 2541aa799ff711fdd85dfbced58ea815a5968674 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 9 Sep 2012 12:40:50 +0200 Subject: cciss: remove unneeded memset() The memory return by kzalloc() or kmem_cache_zalloc() has already be set to zero, so remove useless memset(0). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Cc: Mike Miller Cc: Jens Axboe Cc: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index b0f553b..ca83f96 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -5205,7 +5205,6 @@ static void cciss_shutdown(struct pci_dev *pdev) return; } /* write all data in the battery backed cache to disk */ - memset(flush_buf, 0, 4); return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf, 4, 0, CTLR_LUNID, TYPE_CMD); kfree(flush_buf); -- cgit v0.10.2 From b7010ede4342d3ab9f9a0c51c1aa50139aacadaf Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 9 Sep 2012 12:47:47 +0200 Subject: cciss: select CONFIG_CHECK_SIGNATURE The patch cciss-use-check_signature.patch in -mm tree introduced a build error: drivers/built-in.o: In function `CISS_signature_present': drivers/block/cciss.c:4270: undefined reference to `check_signature' Add missing CONFIG_CHECK_SIGNATURE to fix this issue. Reported-by: Fengguang Wu Signed-off-by: Akinobu Mita Cc: Fengguang Wu Cc: Mike Miller Cc: Jens Axboe Acked-by: "Stephen M. Cameron" Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6983a65..824e09c 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -131,6 +131,7 @@ config BLK_CPQ_DA config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" depends on PCI + select CHECK_SIGNATURE help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. -- cgit v0.10.2 From 1f999572f244f266c5b1b855025723541b0b475d Mon Sep 17 00:00:00 2001 From: Oliver Chick Date: Fri, 21 Sep 2012 10:04:18 +0100 Subject: xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool Changing the type of bdev parameters to be unsigned int :1, rather than bool. This is more consistent with the types of other features in the block drivers. Signed-off-by: Oliver Chick Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jens Axboe diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9ad3b5e..9a54623 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -158,8 +158,8 @@ struct xen_vbd { struct block_device *bdev; /* Cached size parameter. */ sector_t size; - bool flush_support; - bool discard_secure; + unsigned int flush_support:1; + unsigned int discard_secure:1; }; struct backend_info; -- cgit v0.10.2 From 4453bc88f0f7be6d84b50b2e1c1ed239c45fb14a Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Thu, 27 Sep 2012 14:36:43 +0200 Subject: mtip32xx:Added appropriate timeout value for secure erase Added appropriate timeout value for secure erase based on identify device data Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index f946d31..adc6f36 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2035,8 +2035,9 @@ static unsigned int implicit_sector(unsigned char command, } return rv; } - -static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) +static void mtip_set_timeout(struct driver_data *dd, + struct host_to_dev_fis *fis, + unsigned int *timeout, u8 erasemode) { switch (fis->command) { case ATA_CMD_DOWNLOAD_MICRO: @@ -2044,7 +2045,10 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) break; case ATA_CMD_SEC_ERASE_UNIT: case 0xFC: - *timeout = 240000; /* 4 minutes */ + if (erasemode) + *timeout = ((*(dd->port->identify + 90) * 2) * 60000); + else + *timeout = ((*(dd->port->identify + 89) * 2) * 60000); break; case ATA_CMD_STANDBYNOW1: *timeout = 120000; /* 2 minutes */ @@ -2087,6 +2091,7 @@ static int exec_drive_taskfile(struct driver_data *dd, unsigned int transfer_size; unsigned long task_file_data; int intotal = outtotal + req_task->out_size; + int erasemode = 0; taskout = req_task->out_size; taskin = req_task->in_size; @@ -2212,7 +2217,13 @@ static int exec_drive_taskfile(struct driver_data *dd, fis.lba_hi, fis.device); - mtip_set_timeout(&fis, &timeout); + /* check for erase mode support during secure erase.*/ + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) + && (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + erasemode = 1; + } + + mtip_set_timeout(dd, &fis, &timeout, erasemode); /* Determine the correct transfer size.*/ if (force_single_sector) diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 18627a1..5f4a917 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -33,6 +33,9 @@ /* offset of Device Control register in PCIe extended capabilites space */ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 +/* check for erase mode support during secure erase */ +#define MTIP_SEC_ERASE_MODE 0x3 + /* # of times to retry timed out/failed IOs */ #define MTIP_MAX_RETRIES 2 -- cgit v0.10.2 From a1ecac3b0656a68259927c234e505804d33a7b83 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 28 Sep 2012 10:42:23 +0200 Subject: loop: Make explicit loop device destruction lazy xfstests has always had random failures of tests due to loop devices failing to be torn down and hence leaving filesytems that cannot be unmounted. This causes test runs to immediately stop. Over the past 6 or 7 years we've added hacks like explicit unmount -d commands for loop mounts, losetup -d after unmount -d fails, etc, but still the problems persist. Recently, the frequency of loop related failures increased again to the point that xfstests 259 will reliably fail with a stray loop device that was not torn down. That is despite the fact the test is above as simple as it gets - loop 5 or 6 times running mkfs.xfs with different paramters: lofile=$(losetup -f) losetup $lofile "$testfile" "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!" sync losetup -d $lofile And losteup -d $lofile is failing with EBUSY on 1-3 of these loops every time the test is run. Turns out that blkid is running simultaneously with losetup -d, and so it sees an elevated reference count and returns EBUSY. But why is blkid running? It's obvious, isn't it? udev has decided to try and find out what is on the block device as a result of a creation notification. And it is racing with mkfs, so might still be scanning the device when mkfs finishes and we try to tear it down. So, make losetup -d force autoremove behaviour. That is, when the last reference goes away, tear down the device. xfstests wants it *gone*, not causing random teardown failures when we know that all the operations the tests have specifically run on the device have completed and are no longer referencing the loop device. Signed-off-by: Dave Chinner Signed-off-by: Jens Axboe diff --git a/drivers/block/loop.c b/drivers/block/loop.c index e9d594f..54046e5 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -976,8 +976,21 @@ static int loop_clr_fd(struct loop_device *lo) if (lo->lo_state != Lo_bound) return -ENXIO; - if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */ - return -EBUSY; + /* + * If we've explicitly asked to tear down the loop device, + * and it has an elevated reference count, set it for auto-teardown when + * the last reference goes away. This stops $!~#$@ udev from + * preventing teardown because it decided that it needs to run blkid on + * the loopback device whenever they appear. xfstests is notorious for + * failing tests because blkid via udev races with a losetup + * /do something like mkfs/losetup -d causing the losetup -d + * command to fail with EBUSY. + */ + if (lo->lo_refcnt > 1) { + lo->lo_flags |= LO_FLAGS_AUTOCLEAR; + mutex_unlock(&lo->lo_ctl_mutex); + return 0; + } if (filp == NULL) return -EINVAL; -- cgit v0.10.2 From 9b0573c07f278e9888c352aa9724035c75784ea0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 15:07:34 +0200 Subject: ALSA: PCM: Fix some races at disconnection Fix races at PCM disconnection: - while a PCM device is being opened or closed - while the PCM state is being changed without lock in prepare, hw_params, hw_free ops Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/pcm.c b/sound/core/pcm.c index f299194..993b240 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -1086,11 +1086,15 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) if (list_empty(&pcm->list)) goto unlock; + mutex_lock(&pcm->open_mutex); list_del_init(&pcm->list); for (cidx = 0; cidx < 2; cidx++) - for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) + for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) { + snd_pcm_stream_lock_irq(substream); if (substream->runtime) substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED; + snd_pcm_stream_unlock_irq(substream); + } list_for_each_entry(notify, &snd_pcm_notify_list, list) { notify->n_disconnect(pcm); } @@ -1110,6 +1114,7 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) pcm->streams[cidx].chmap_kctl = NULL; } } + mutex_unlock(&pcm->open_mutex); unlock: mutex_unlock(®ister_mutex); return 0; diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 5e12e5b..8753c89 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -369,6 +369,14 @@ static int period_to_usecs(struct snd_pcm_runtime *runtime) return usecs; } +static void snd_pcm_set_state(struct snd_pcm_substream *substream, int state) +{ + snd_pcm_stream_lock_irq(substream); + if (substream->runtime->status->state != SNDRV_PCM_STATE_DISCONNECTED) + substream->runtime->status->state = state; + snd_pcm_stream_unlock_irq(substream); +} + static int snd_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -452,7 +460,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, runtime->boundary *= 2; snd_pcm_timer_resolution_change(substream); - runtime->status->state = SNDRV_PCM_STATE_SETUP; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP); if (pm_qos_request_active(&substream->latency_pm_qos_req)) pm_qos_remove_request(&substream->latency_pm_qos_req); @@ -464,7 +472,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, /* hardware might be unusable from this time, so we force application to retry to set the correct hardware parameter settings */ - runtime->status->state = SNDRV_PCM_STATE_OPEN; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); return err; @@ -512,7 +520,7 @@ static int snd_pcm_hw_free(struct snd_pcm_substream *substream) return -EBADFD; if (substream->ops->hw_free) result = substream->ops->hw_free(substream); - runtime->status->state = SNDRV_PCM_STATE_OPEN; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); pm_qos_remove_request(&substream->latency_pm_qos_req); return result; } @@ -1320,7 +1328,7 @@ static void snd_pcm_post_prepare(struct snd_pcm_substream *substream, int state) { struct snd_pcm_runtime *runtime = substream->runtime; runtime->control->appl_ptr = runtime->status->hw_ptr; - runtime->status->state = SNDRV_PCM_STATE_PREPARED; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_PREPARED); } static struct action_ops snd_pcm_action_prepare = { -- cgit v0.10.2 From 978520b75f0a1ce82b17e1e8186417250de6d545 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 15:12:55 +0200 Subject: ALSA: usb-audio: Fix races at disconnection Close some races at disconnection of a USB audio device by adding the chip->shutdown_mutex and chip->shutdown check at appropriate places. The spots to put bandaids are: - PCM prepare, hw_params and hw_free - where the usb device is accessed for communication or get speed, in mixer.c and others; the device speed is now cached in subs->speed instead of accessing to chip->dev The accesses in PCM open and close don't need the mutex protection because these are already handled in the core PCM disconnection code. The autosuspend/autoresume codes are still uncovered by this patch because of possible mutex deadlocks. They'll be covered by the upcoming change to rwsem. Also the mixer codes are untouched, too. These will be fixed in another patch, too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/card.h b/sound/usb/card.h index afa4f9e..814cb35 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -126,6 +126,7 @@ struct snd_usb_substream { struct snd_usb_endpoint *sync_endpoint; unsigned long flags; bool need_setup_ep; /* (re)configure EP at prepare? */ + unsigned int speed; /* USB_SPEED_XXX */ u64 formats; /* format bitmasks (all or'ed) */ unsigned int num_formats; /* number of supported audio formats (list) */ diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index fe56c9d..c2ef11c 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -287,25 +287,32 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v unsigned char buf[2]; int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; int timeout = 10; - int err; + int idx = 0, err; err = snd_usb_autoresume(cval->mixer->chip); if (err < 0) return -EIO; + mutex_lock(&chip->shutdown_mutex); while (timeout-- > 0) { + if (chip->shutdown) + break; + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, val_len) >= val_len) { + validx, idx, buf, val_len) >= val_len) { *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); - snd_usb_autosuspend(cval->mixer->chip); - return 0; + err = 0; + goto out; } } - snd_usb_autosuspend(cval->mixer->chip); snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); - return -EINVAL; + request, validx, idx, cval->val_type); + err = -EINVAL; + + out: + mutex_unlock(&chip->shutdown_mutex); + snd_usb_autosuspend(cval->mixer->chip); + return err; } static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret) @@ -313,7 +320,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v struct snd_usb_audio *chip = cval->mixer->chip; unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */ unsigned char *val; - int ret, size; + int idx = 0, ret, size; __u8 bRequest; if (request == UAC_GET_CUR) { @@ -330,16 +337,22 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v if (ret) goto error; - ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest, + mutex_lock(&chip->shutdown_mutex); + if (chip->shutdown) + ret = -ENODEV; + else { + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); + ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, size); + validx, idx, buf, size); + } + mutex_unlock(&chip->shutdown_mutex); snd_usb_autosuspend(chip); if (ret < 0) { error: snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); + request, validx, idx, cval->val_type); return ret; } @@ -417,7 +430,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, { struct snd_usb_audio *chip = cval->mixer->chip; unsigned char buf[2]; - int val_len, err, timeout = 10; + int idx = 0, val_len, err, timeout = 10; if (cval->mixer->protocol == UAC_VERSION_1) { val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; @@ -440,19 +453,27 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = snd_usb_autoresume(chip); if (err < 0) return -EIO; - while (timeout-- > 0) + mutex_lock(&chip->shutdown_mutex); + while (timeout-- > 0) { + if (chip->shutdown) + break; + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); if (snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, val_len) >= 0) { - snd_usb_autosuspend(chip); - return 0; + validx, idx, buf, val_len) >= 0) { + err = 0; + goto out; } - snd_usb_autosuspend(chip); + } snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]); - return -EINVAL; + request, validx, idx, cval->val_type, buf[0], buf[1]); + err = -EINVAL; + + out: + mutex_unlock(&chip->shutdown_mutex); + snd_usb_autosuspend(chip); + return err; } static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 55e19e1..55e741c 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -71,6 +71,8 @@ static snd_pcm_uframes_t snd_usb_pcm_pointer(struct snd_pcm_substream *substream unsigned int hwptr_done; subs = (struct snd_usb_substream *)substream->runtime->private_data; + if (subs->stream->chip->shutdown) + return SNDRV_PCM_POS_XRUN; spin_lock(&subs->lock); hwptr_done = subs->hwptr_done; substream->runtime->delay = snd_usb_pcm_delay(subs, @@ -444,7 +446,6 @@ static int configure_endpoint(struct snd_usb_substream *subs) { int ret; - mutex_lock(&subs->stream->chip->shutdown_mutex); /* format changed */ stop_endpoints(subs, 0, 0, 0); ret = snd_usb_endpoint_set_params(subs->data_endpoint, @@ -455,7 +456,7 @@ static int configure_endpoint(struct snd_usb_substream *subs) subs->cur_audiofmt, subs->sync_endpoint); if (ret < 0) - goto unlock; + return ret; if (subs->sync_endpoint) ret = snd_usb_endpoint_set_params(subs->data_endpoint, @@ -465,9 +466,6 @@ static int configure_endpoint(struct snd_usb_substream *subs) subs->cur_rate, subs->cur_audiofmt, NULL); - -unlock: - mutex_unlock(&subs->stream->chip->shutdown_mutex); return ret; } @@ -505,7 +503,13 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - if ((ret = set_format(subs, fmt)) < 0) + mutex_lock(&subs->stream->chip->shutdown_mutex); + if (subs->stream->chip->shutdown) + ret = -ENODEV; + else + ret = set_format(subs, fmt); + mutex_unlock(&subs->stream->chip->shutdown_mutex); + if (ret < 0) return ret; subs->interface = fmt->iface; @@ -528,8 +532,10 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->cur_rate = 0; subs->period_bytes = 0; mutex_lock(&subs->stream->chip->shutdown_mutex); - stop_endpoints(subs, 0, 1, 1); - deactivate_endpoints(subs); + if (!subs->stream->chip->shutdown) { + stop_endpoints(subs, 0, 1, 1); + deactivate_endpoints(subs); + } mutex_unlock(&subs->stream->chip->shutdown_mutex); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -552,12 +558,19 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) return -ENXIO; } - if (snd_BUG_ON(!subs->data_endpoint)) - return -EIO; + mutex_lock(&subs->stream->chip->shutdown_mutex); + if (subs->stream->chip->shutdown) { + ret = -ENODEV; + goto unlock; + } + if (snd_BUG_ON(!subs->data_endpoint)) { + ret = -EIO; + goto unlock; + } ret = set_format(subs, subs->cur_audiofmt); if (ret < 0) - return ret; + goto unlock; iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface); alts = &iface->altsetting[subs->cur_audiofmt->altset_idx]; @@ -567,12 +580,12 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->cur_audiofmt, subs->cur_rate); if (ret < 0) - return ret; + goto unlock; if (subs->need_setup_ep) { ret = configure_endpoint(subs); if (ret < 0) - return ret; + goto unlock; subs->need_setup_ep = false; } @@ -592,9 +605,11 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) - return start_endpoints(subs, 1); + ret = start_endpoints(subs, 1); - return 0; + unlock: + mutex_unlock(&subs->stream->chip->shutdown_mutex); + return ret; } static struct snd_pcm_hardware snd_usb_hardware = @@ -647,7 +662,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, return 0; } /* check whether the period time is >= the data packet interval */ - if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) { + if (subs->speed != USB_SPEED_FULL) { ptime = 125 * (1 << fp->datainterval); if (ptime > pt->max || (ptime == pt->max && pt->openmax)) { hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max); @@ -925,7 +940,7 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre return err; param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) + if (subs->speed == USB_SPEED_FULL) /* full speed devices have fixed data packet interval */ ptmin = 1000; if (ptmin == 1000) diff --git a/sound/usb/proc.c b/sound/usb/proc.c index ebc1a5b..d218f76 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -108,7 +108,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s } snd_iprintf(buffer, "\n"); } - if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) + if (subs->speed != USB_SPEED_FULL) snd_iprintf(buffer, " Data packet interval: %d us\n", 125 * (1 << fp->datainterval)); // snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize); @@ -124,7 +124,7 @@ static void proc_dump_ep_status(struct snd_usb_substream *subs, return; snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize); snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n", - snd_usb_get_speed(subs->dev) == USB_SPEED_FULL + subs->speed == USB_SPEED_FULL ? get_full_speed_hz(ep->freqm) : get_high_speed_hz(ep->freqm), ep->freqm >> 16, ep->freqm & 0xffff); diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 083ed81..1de0c8c 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -90,6 +90,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as, subs->direction = stream; subs->dev = as->chip->dev; subs->txfr_quirk = as->chip->txfr_quirk; + subs->speed = snd_usb_get_speed(subs->dev); snd_usb_set_pcm_ops(as->pcm, stream); -- cgit v0.10.2 From 34f3c89fda4fba9fe689db22253ca8db2f5e6386 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Oct 2012 12:16:02 +0200 Subject: ALSA: usb-audio: Use rwsem for disconnect protection Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/card.c b/sound/usb/card.c index 561bb74..282f0fc 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -339,7 +339,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, } mutex_init(&chip->mutex); - mutex_init(&chip->shutdown_mutex); + init_rwsem(&chip->shutdown_rwsem); chip->index = idx; chip->dev = dev; chip->card = card; @@ -560,7 +560,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, card = chip->card; mutex_lock(®ister_mutex); - mutex_lock(&chip->shutdown_mutex); + down_write(&chip->shutdown_rwsem); chip->shutdown = 1; chip->num_interfaces--; if (chip->num_interfaces <= 0) { @@ -582,11 +582,11 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, snd_usb_mixer_disconnect(p); } usb_chip[chip->index] = NULL; - mutex_unlock(&chip->shutdown_mutex); + up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); snd_card_free_when_closed(card); } else { - mutex_unlock(&chip->shutdown_mutex); + up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); } } @@ -618,16 +618,20 @@ int snd_usb_autoresume(struct snd_usb_audio *chip) { int err = -ENODEV; + down_read(&chip->shutdown_rwsem); if (!chip->shutdown && !chip->probing) err = usb_autopm_get_interface(chip->pm_intf); + up_read(&chip->shutdown_rwsem); return err; } void snd_usb_autosuspend(struct snd_usb_audio *chip) { + down_read(&chip->shutdown_rwsem); if (!chip->shutdown && !chip->probing) usb_autopm_put_interface(chip->pm_intf); + up_read(&chip->shutdown_rwsem); } static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c2ef11c..298070e 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -292,7 +292,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v err = snd_usb_autoresume(cval->mixer->chip); if (err < 0) return -EIO; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); while (timeout-- > 0) { if (chip->shutdown) break; @@ -310,7 +310,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v err = -EINVAL; out: - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(cval->mixer->chip); return err; } @@ -337,7 +337,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v if (ret) goto error; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); if (chip->shutdown) ret = -ENODEV; else { @@ -346,7 +346,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, idx, buf, size); } - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(chip); if (ret < 0) { @@ -453,7 +453,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = snd_usb_autoresume(chip); if (err < 0) return -EIO; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); while (timeout-- > 0) { if (chip->shutdown) break; @@ -471,7 +471,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = -EINVAL; out: - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(chip); return err; } diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 55e741c..37428f7 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -503,12 +503,12 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (subs->stream->chip->shutdown) ret = -ENODEV; else ret = set_format(subs, fmt); - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); if (ret < 0) return ret; @@ -531,12 +531,12 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->cur_audiofmt = NULL; subs->cur_rate = 0; subs->period_bytes = 0; - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (!subs->stream->chip->shutdown) { stop_endpoints(subs, 0, 1, 1); deactivate_endpoints(subs); } - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -558,7 +558,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) return -ENXIO; } - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (subs->stream->chip->shutdown) { ret = -ENODEV; goto unlock; @@ -608,7 +608,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) ret = start_endpoints(subs, 1); unlock: - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); return ret; } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index b8233eb..ef42797 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -37,7 +37,7 @@ struct snd_usb_audio { struct usb_interface *pm_intf; u32 usb_id; struct mutex mutex; - struct mutex shutdown_mutex; + struct rw_semaphore shutdown_rwsem; unsigned int shutdown:1; unsigned int probing:1; unsigned int autosuspended:1; -- cgit v0.10.2 From 888ea7d5ac6815ba16b3b3a20f665a92c7af6724 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Oct 2012 12:40:37 +0200 Subject: ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c Similar like the previous commit, cover with chip->shutdown_rwsem and chip->shutdown checks. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 690000d..ae2b714 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -283,6 +283,11 @@ static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e if (value > 1) return -EINVAL; changed = value != mixer->audigy2nx_leds[index]; + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) { + err = -ENODEV; + goto out; + } if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042)) err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), 0x24, @@ -299,6 +304,8 @@ static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e usb_sndctrlpipe(mixer->chip->dev, 0), 0x24, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, value, index + 2, NULL, 0); + out: + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; mixer->audigy2nx_leds[index] = value; @@ -392,11 +399,16 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, for (i = 0; jacks[i].name; ++i) { snd_iprintf(buffer, "%s: ", jacks[i].name); - err = snd_usb_ctl_msg(mixer->chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = 0; + else + err = snd_usb_ctl_msg(mixer->chip->dev, usb_rcvctrlpipe(mixer->chip->dev, 0), UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, jacks[i].unitid << 8, buf, 3); + up_read(&mixer->chip->shutdown_rwsem); if (err == 3 && (buf[0] == 3 || buf[0] == 6)) snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]); else @@ -426,10 +438,15 @@ static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol, else new_status = old_status & ~0x02; changed = new_status != old_status; - err = snd_usb_ctl_msg(mixer->chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), 0x08, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, 50, 0, &new_status, 1); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; mixer->xonar_u1_status = new_status; @@ -468,11 +485,17 @@ static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol, u8 bRequest = (kcontrol->private_value >> 16) & 0xff; u16 wIndex = kcontrol->private_value & 0xffff; u8 tmp; + int ret; - int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + ret = -ENODEV; + else + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0, cpu_to_le16(wIndex), &tmp, sizeof(tmp), 1000); + up_read(&mixer->chip->shutdown_rwsem); if (ret < 0) { snd_printk(KERN_ERR @@ -493,11 +516,17 @@ static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol, u8 bRequest = (kcontrol->private_value >> 16) & 0xff; u16 wIndex = kcontrol->private_value & 0xffff; u16 wValue = ucontrol->value.integer.value[0]; + int ret; - int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + ret = -ENODEV; + else + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, cpu_to_le16(wValue), cpu_to_le16(wIndex), NULL, 0, 1000); + up_read(&mixer->chip->shutdown_rwsem); if (ret < 0) { snd_printk(KERN_ERR @@ -656,11 +685,16 @@ static int snd_ftu_eff_switch_get(struct snd_kcontrol *kctl, return -EINVAL; - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; @@ -703,11 +737,16 @@ static int snd_ftu_eff_switch_put(struct snd_kcontrol *kctl, if (!pval->is_cached) { /* Read current value */ - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; @@ -719,11 +758,16 @@ static int snd_ftu_eff_switch_put(struct snd_kcontrol *kctl, if (cur_val != new_val) { value[0] = new_val; value[1] = 0; - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; -- cgit v0.10.2 From a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 13:05:59 +0200 Subject: ALSA: Add a reference counter to card instance For more strict protection for wild disconnections, a refcount is introduced to the card instance, and let it up/down when an object is referred via snd_lookup_*() in the open ops. The free-after-last-close check is also changed to check this refcount instead of the empty list, too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai diff --git a/include/sound/core.h b/include/sound/core.h index bc05668..93896ad 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -132,6 +132,7 @@ struct snd_card { int shutdown; /* this card is going down */ int free_on_last_close; /* free in context of file_release */ wait_queue_head_t shutdown_sleep; + atomic_t refcount; /* refcount for disconnection */ struct device *dev; /* device assigned to this card */ struct device *card_dev; /* cardX object for sysfs */ @@ -189,6 +190,7 @@ struct snd_minor { const struct file_operations *f_ops; /* file operations */ void *private_data; /* private data for f_ops->open */ struct device *dev; /* device for sysfs */ + struct snd_card *card_ptr; /* assigned card instance */ }; /* return a device pointer linked to each sound device as a parent */ @@ -295,6 +297,7 @@ int snd_card_info_done(void); int snd_component_add(struct snd_card *card, const char *component); int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); +void snd_card_unref(struct snd_card *card); #define snd_card_set_dev(card, devptr) ((card)->dev = (devptr)) diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index c40ae57..ad11dc9 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -100,12 +100,15 @@ static int snd_compr_open(struct inode *inode, struct file *f) if (dirn != compr->direction) { pr_err("this device doesn't support this direction\n"); + snd_card_unref(compr->card); return -EINVAL; } data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) + if (!data) { + snd_card_unref(compr->card); return -ENOMEM; + } data->stream.ops = compr->ops; data->stream.direction = dirn; data->stream.private_data = compr->private_data; @@ -113,6 +116,7 @@ static int snd_compr_open(struct inode *inode, struct file *f) runtime = kzalloc(sizeof(*runtime), GFP_KERNEL); if (!runtime) { kfree(data); + snd_card_unref(compr->card); return -ENOMEM; } runtime->state = SNDRV_PCM_STATE_OPEN; @@ -126,7 +130,8 @@ static int snd_compr_open(struct inode *inode, struct file *f) kfree(runtime); kfree(data); } - return ret; + snd_card_unref(compr->card); + return 0; } static int snd_compr_free(struct inode *inode, struct file *f) diff --git a/sound/core/control.c b/sound/core/control.c index 7e86a5b..9768a39 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -86,6 +86,7 @@ static int snd_ctl_open(struct inode *inode, struct file *file) write_lock_irqsave(&card->ctl_files_rwlock, flags); list_add_tail(&ctl->list, &card->ctl_files); write_unlock_irqrestore(&card->ctl_files_rwlock, flags); + snd_card_unref(card); return 0; __error: @@ -93,6 +94,8 @@ static int snd_ctl_open(struct inode *inode, struct file *file) __error2: snd_card_file_remove(card, file); __error1: + if (card) + snd_card_unref(card); return err; } diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 75ea16f..53a6ba5 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -100,8 +100,10 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) if (hw == NULL) return -ENODEV; - if (!try_module_get(hw->card->module)) + if (!try_module_get(hw->card->module)) { + snd_card_unref(hw->card); return -EFAULT; + } init_waitqueue_entry(&wait, current); add_wait_queue(&hw->open_wait, &wait); @@ -148,6 +150,7 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) mutex_unlock(&hw->open_mutex); if (err < 0) module_put(hw->card->module); + snd_card_unref(hw->card); return err; } diff --git a/sound/core/init.c b/sound/core/init.c index d8ec849..7b012d1 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -213,6 +213,7 @@ int snd_card_create(int idx, const char *xid, spin_lock_init(&card->files_lock); INIT_LIST_HEAD(&card->files_list); init_waitqueue_head(&card->shutdown_sleep); + atomic_set(&card->refcount, 0); #ifdef CONFIG_PM mutex_init(&card->power_lock); init_waitqueue_head(&card->power_sleep); @@ -446,21 +447,36 @@ static int snd_card_do_free(struct snd_card *card) return 0; } +/** + * snd_card_unref - release the reference counter + * @card: the card instance + * + * Decrements the reference counter. When it reaches to zero, wake up + * the sleeper and call the destructor if needed. + */ +void snd_card_unref(struct snd_card *card) +{ + if (atomic_dec_and_test(&card->refcount)) { + wake_up(&card->shutdown_sleep); + if (card->free_on_last_close) + snd_card_do_free(card); + } +} +EXPORT_SYMBOL(snd_card_unref); + int snd_card_free_when_closed(struct snd_card *card) { - int free_now = 0; - int ret = snd_card_disconnect(card); - if (ret) - return ret; + int ret; - spin_lock(&card->files_lock); - if (list_empty(&card->files_list)) - free_now = 1; - else - card->free_on_last_close = 1; - spin_unlock(&card->files_lock); + atomic_inc(&card->refcount); + ret = snd_card_disconnect(card); + if (ret) { + atomic_dec(&card->refcount); + return ret; + } - if (free_now) + card->free_on_last_close = 1; + if (atomic_dec_and_test(&card->refcount)) snd_card_do_free(card); return 0; } @@ -474,7 +490,7 @@ int snd_card_free(struct snd_card *card) return ret; /* wait, until all devices are ready for the free operation */ - wait_event(card->shutdown_sleep, list_empty(&card->files_list)); + wait_event(card->shutdown_sleep, !atomic_read(&card->refcount)); snd_card_do_free(card); return 0; } @@ -886,6 +902,7 @@ int snd_card_file_add(struct snd_card *card, struct file *file) return -ENODEV; } list_add(&mfile->list, &card->files_list); + atomic_inc(&card->refcount); spin_unlock(&card->files_lock); return 0; } @@ -908,7 +925,6 @@ EXPORT_SYMBOL(snd_card_file_add); int snd_card_file_remove(struct snd_card *card, struct file *file) { struct snd_monitor_file *mfile, *found = NULL; - int last_close = 0; spin_lock(&card->files_lock); list_for_each_entry(mfile, &card->files_list, list) { @@ -923,19 +939,13 @@ int snd_card_file_remove(struct snd_card *card, struct file *file) break; } } - if (list_empty(&card->files_list)) - last_close = 1; spin_unlock(&card->files_lock); - if (last_close) { - wake_up(&card->shutdown_sleep); - if (card->free_on_last_close) - snd_card_do_free(card); - } if (!found) { snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file); return -ENOENT; } kfree(found); + snd_card_unref(card); return 0; } diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c index 29f6ded..a9a2e63 100644 --- a/sound/core/oss/mixer_oss.c +++ b/sound/core/oss/mixer_oss.c @@ -52,14 +52,19 @@ static int snd_mixer_oss_open(struct inode *inode, struct file *file) SNDRV_OSS_DEVICE_TYPE_MIXER); if (card == NULL) return -ENODEV; - if (card->mixer_oss == NULL) + if (card->mixer_oss == NULL) { + snd_card_unref(card); return -ENODEV; + } err = snd_card_file_add(card, file); - if (err < 0) + if (err < 0) { + snd_card_unref(card); return err; + } fmixer = kzalloc(sizeof(*fmixer), GFP_KERNEL); if (fmixer == NULL) { snd_card_file_remove(card, file); + snd_card_unref(card); return -ENOMEM; } fmixer->card = card; @@ -68,6 +73,7 @@ static int snd_mixer_oss_open(struct inode *inode, struct file *file) if (!try_module_get(card->module)) { kfree(fmixer); snd_card_file_remove(card, file); + snd_card_unref(card); return -EFAULT; } return 0; diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 08fde00..2529e01 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -2457,6 +2457,8 @@ static int snd_pcm_oss_open(struct inode *inode, struct file *file) __error2: snd_card_file_remove(pcm->card, file); __error1: + if (pcm) + snd_card_unref(pcm->card); return err; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 8753c89..48c6a70 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1642,6 +1642,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) write_unlock_irq(&snd_pcm_link_rwlock); up_write(&snd_pcm_link_rwsem); _nolock: + snd_card_unref(substream1->pcm->card); fput_light(file, fput_needed); if (res < 0) kfree(group); @@ -2116,7 +2117,9 @@ static int snd_pcm_playback_open(struct inode *inode, struct file *file) return err; pcm = snd_lookup_minor_data(iminor(inode), SNDRV_DEVICE_TYPE_PCM_PLAYBACK); - return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK); + err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK); + snd_card_unref(pcm->card); + return err; } static int snd_pcm_capture_open(struct inode *inode, struct file *file) @@ -2127,7 +2130,9 @@ static int snd_pcm_capture_open(struct inode *inode, struct file *file) return err; pcm = snd_lookup_minor_data(iminor(inode), SNDRV_DEVICE_TYPE_PCM_CAPTURE); - return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE); + err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE); + snd_card_unref(pcm->card); + return err; } static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index ebf6e49..7d4f62a 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -379,8 +379,10 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) if (rmidi == NULL) return -ENODEV; - if (!try_module_get(rmidi->card->module)) + if (!try_module_get(rmidi->card->module)) { + snd_card_unref(rmidi->card); return -ENXIO; + } mutex_lock(&rmidi->open_mutex); card = rmidi->card; @@ -440,6 +442,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) #endif file->private_data = rawmidi_file; mutex_unlock(&rmidi->open_mutex); + snd_card_unref(rmidi->card); return 0; __error: @@ -447,6 +450,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) __error_card: mutex_unlock(&rmidi->open_mutex); module_put(rmidi->card->module); + snd_card_unref(rmidi->card); return err; } diff --git a/sound/core/sound.c b/sound/core/sound.c index 6439760..89780c3 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -98,6 +98,10 @@ static void snd_request_other(int minor) * * Checks that a minor device with the specified type is registered, and returns * its user data pointer. + * + * This function increments the reference counter of the card instance + * if an associated instance with the given minor number and type is found. + * The caller must call snd_card_unref() appropriately later. */ void *snd_lookup_minor_data(unsigned int minor, int type) { @@ -108,9 +112,11 @@ void *snd_lookup_minor_data(unsigned int minor, int type) return NULL; mutex_lock(&sound_mutex); mreg = snd_minors[minor]; - if (mreg && mreg->type == type) + if (mreg && mreg->type == type) { private_data = mreg->private_data; - else + if (mreg->card_ptr) + atomic_inc(&mreg->card_ptr->refcount); + } else private_data = NULL; mutex_unlock(&sound_mutex); return private_data; @@ -275,6 +281,7 @@ int snd_register_device_for_dev(int type, struct snd_card *card, int dev, preg->device = dev; preg->f_ops = f_ops; preg->private_data = private_data; + preg->card_ptr = card; mutex_lock(&sound_mutex); #ifdef CONFIG_SND_DYNAMIC_MINORS minor = snd_find_free_minor(type); diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index e952833..e1d79ee 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -40,6 +40,9 @@ static struct snd_minor *snd_oss_minors[SNDRV_OSS_MINORS]; static DEFINE_MUTEX(sound_oss_mutex); +/* NOTE: This function increments the refcount of the associated card like + * snd_lookup_minor_data(); the caller must call snd_card_unref() appropriately + */ void *snd_lookup_oss_minor_data(unsigned int minor, int type) { struct snd_minor *mreg; @@ -49,9 +52,11 @@ void *snd_lookup_oss_minor_data(unsigned int minor, int type) return NULL; mutex_lock(&sound_oss_mutex); mreg = snd_oss_minors[minor]; - if (mreg && mreg->type == type) + if (mreg && mreg->type == type) { private_data = mreg->private_data; - else + if (mreg->card_ptr) + atomic_inc(&mreg->card_ptr->refcount); + } else private_data = NULL; mutex_unlock(&sound_oss_mutex); return private_data; @@ -123,6 +128,7 @@ int snd_register_oss_device(int type, struct snd_card *card, int dev, preg->device = dev; preg->f_ops = f_ops; preg->private_data = private_data; + preg->card_ptr = card; mutex_lock(&sound_oss_mutex); snd_oss_minors[minor] = preg; minor_unit = SNDRV_MINOR_OSS_DEVICE(minor); -- cgit v0.10.2 From 0914f7961babbf28aaa2f19b453951fb4841c03f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 16:43:39 +0200 Subject: ALSA: Avoid endless sleep after disconnect When disconnect callback is called, each component should wake up sleepers and check card->shutdown flag for avoiding the endless sleep blocking the proper resource release. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/control.c b/sound/core/control.c index 9768a39..8c7c2c9 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -1437,6 +1437,8 @@ static ssize_t snd_ctl_read(struct file *file, char __user *buffer, spin_unlock_irq(&ctl->read_lock); schedule(); remove_wait_queue(&ctl->change_sleep, &wait); + if (ctl->card->shutdown) + return -ENODEV; if (signal_pending(current)) return -ERESTARTSYS; spin_lock_irq(&ctl->read_lock); diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 53a6ba5..3f7f662 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -131,6 +131,10 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) mutex_unlock(&hw->open_mutex); schedule(); mutex_lock(&hw->open_mutex); + if (hw->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; @@ -462,12 +466,15 @@ static int snd_hwdep_dev_disconnect(struct snd_device *device) mutex_unlock(®ister_mutex); return -EINVAL; } + mutex_lock(&hwdep->open_mutex); + wake_up(&hwdep->open_wait); #ifdef CONFIG_SND_OSSEMUL if (hwdep->ossreg) snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device); #endif snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device); list_del_init(&hwdep->list); + mutex_unlock(&hwdep->open_mutex); mutex_unlock(®ister_mutex); return 0; } diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 2529e01..f337b66 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -2441,6 +2441,10 @@ static int snd_pcm_oss_open(struct inode *inode, struct file *file) mutex_unlock(&pcm->open_mutex); schedule(); mutex_lock(&pcm->open_mutex); + if (pcm->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 993b240..030102c 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -1087,12 +1087,16 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) goto unlock; mutex_lock(&pcm->open_mutex); + wake_up(&pcm->open_wait); list_del_init(&pcm->list); for (cidx = 0; cidx < 2; cidx++) for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) { snd_pcm_stream_lock_irq(substream); - if (substream->runtime) + if (substream->runtime) { substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED; + wake_up(&substream->runtime->sleep); + wake_up(&substream->runtime->tsleep); + } snd_pcm_stream_unlock_irq(substream); } list_for_each_entry(notify, &snd_pcm_notify_list, list) { diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 48c6a70..6e8872d 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1518,6 +1518,10 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, down_read(&snd_pcm_link_rwsem); snd_pcm_stream_lock_irq(substream); remove_wait_queue(&to_check->sleep, &wait); + if (card->shutdown) { + result = -ENODEV; + break; + } if (tout == 0) { if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) result = -ESTRPIPE; @@ -2169,6 +2173,10 @@ static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream) mutex_unlock(&pcm->open_mutex); schedule(); mutex_lock(&pcm->open_mutex); + if (pcm->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 7d4f62a..1bb95ae 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -424,6 +424,10 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) mutex_unlock(&rmidi->open_mutex); schedule(); mutex_lock(&rmidi->open_mutex); + if (rmidi->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; @@ -995,6 +999,8 @@ static ssize_t snd_rawmidi_read(struct file *file, char __user *buf, size_t coun spin_unlock_irq(&runtime->lock); schedule(); remove_wait_queue(&runtime->sleep, &wait); + if (rfile->rmidi->card->shutdown) + return -ENODEV; if (signal_pending(current)) return result > 0 ? result : -ERESTARTSYS; if (!runtime->avail) @@ -1238,6 +1244,8 @@ static ssize_t snd_rawmidi_write(struct file *file, const char __user *buf, spin_unlock_irq(&runtime->lock); timeout = schedule_timeout(30 * HZ); remove_wait_queue(&runtime->sleep, &wait); + if (rfile->rmidi->card->shutdown) + return -ENODEV; if (signal_pending(current)) return result > 0 ? result : -ERESTARTSYS; if (!runtime->avail && !timeout) @@ -1613,9 +1621,20 @@ static int snd_rawmidi_dev_register(struct snd_device *device) static int snd_rawmidi_dev_disconnect(struct snd_device *device) { struct snd_rawmidi *rmidi = device->device_data; + int dir; mutex_lock(®ister_mutex); + mutex_lock(&rmidi->open_mutex); + wake_up(&rmidi->open_wait); list_del_init(&rmidi->list); + for (dir = 0; dir < 2; dir++) { + struct snd_rawmidi_substream *s; + list_for_each_entry(s, &rmidi->streams[dir].substreams, list) { + if (s->runtime) + wake_up(&s->runtime->sleep); + } + } + #ifdef CONFIG_SND_OSSEMUL if (rmidi->ossreg) { if ((int)rmidi->device == midi_map[rmidi->card->number]) { @@ -1630,6 +1649,7 @@ static int snd_rawmidi_dev_disconnect(struct snd_device *device) } #endif /* CONFIG_SND_OSSEMUL */ snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device); + mutex_unlock(&rmidi->open_mutex); mutex_unlock(®ister_mutex); return 0; } -- cgit v0.10.2 From b6514633bdc6a511f7c44b3ecb86d6071374239d Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 25 Oct 2012 11:00:24 +0200 Subject: x86: remove obsolete comment from asm/xen/hypervisor.h Signed-off-by: Olaf Hering Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h index 66d0fff..125f344 100644 --- a/arch/x86/include/asm/xen/hypervisor.h +++ b/arch/x86/include/asm/xen/hypervisor.h @@ -33,7 +33,6 @@ #ifndef _ASM_X86_XEN_HYPERVISOR_H #define _ASM_X86_XEN_HYPERVISOR_H -/* arch/i386/kernel/setup.c */ extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; -- cgit v0.10.2 From a67baeb77375199bbd842fa308cb565164dd1f19 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 24 Oct 2012 12:39:02 +0100 Subject: xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF map->kmap_ops allocated in gntdev_alloc_map() wasn't freed by gntdev_put_map(). Add a gntdev_free_map() helper function to free everything allocated by gntdev_alloc_map(). Signed-off-by: David Vrabel Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 610bfc6be..2e22df2 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -105,6 +105,21 @@ static void gntdev_print_maps(struct gntdev_priv *priv, #endif } +static void gntdev_free_map(struct grant_map *map) +{ + if (map == NULL) + return; + + if (map->pages) + free_xenballooned_pages(map->count, map->pages); + kfree(map->pages); + kfree(map->grants); + kfree(map->map_ops); + kfree(map->unmap_ops); + kfree(map->kmap_ops); + kfree(map); +} + static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) { struct grant_map *add; @@ -142,12 +157,7 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) return add; err: - kfree(add->pages); - kfree(add->grants); - kfree(add->map_ops); - kfree(add->unmap_ops); - kfree(add->kmap_ops); - kfree(add); + gntdev_free_map(add); return NULL; } @@ -198,17 +208,9 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } - if (map->pages) { - if (!use_ptemod) - unmap_grant_pages(map, 0, map->count); - - free_xenballooned_pages(map->count, map->pages); - } - kfree(map->pages); - kfree(map->grants); - kfree(map->map_ops); - kfree(map->unmap_ops); - kfree(map); + if (map->pages && !use_ptemod) + unmap_grant_pages(map, 0, map->count); + gntdev_free_map(map); } /* ------------------------------------------------------------------ */ -- cgit v0.10.2 From 01bc825f6311ba2878ae353418eee575d3051594 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:37 +0100 Subject: xen-fbfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Florian Tobias Schandinat Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index b7f5173..917bb56 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -641,7 +641,6 @@ static void xenfb_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -670,6 +669,10 @@ InitWait: info->feature_resize = val; break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; -- cgit v0.10.2 From 2ebb939ab9c6a2484866c5eae4184c83c2b21af8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:38 +0100 Subject: xen-kbdfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Dmitry Torokhov Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 02ca868..6f7d990 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -311,7 +311,6 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -350,6 +349,10 @@ InitWait: break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; -- cgit v0.10.2 From 1bcaba51eba549748917f7d6eb41900ff9ee3d5f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 17 Oct 2012 13:14:09 -0400 Subject: xen/xenbus: fix overflow check in xenbus_file_write() Acked-by: Ian Campbell Reported-by: Dan Carpenter Signed-off-by: Jan Beulich [v1: Rebased on upstream] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index 89f7625..ac72702 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -458,7 +458,7 @@ static ssize_t xenbus_file_write(struct file *filp, goto out; /* Can't write a xenbus message larger we can buffer */ - if ((len + u->len) > sizeof(u->u.buffer)) { + if (len > sizeof(u->u.buffer) - u->len) { /* On error, dump existing buffer */ u->len = 0; rc = -EINVAL; -- cgit v0.10.2 From c8d258a7b2b6633b79cad4464e8dfb3dc328d897 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 24 Oct 2012 16:26:08 +0100 Subject: xen/arm: use the __HVC macro Use the new __HVC macro in hypercall.S. Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed..71f7239 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include #include +#include #include -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); -- cgit v0.10.2 From bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 25 Oct 2012 09:51:39 +0200 Subject: rt2800: validate step value for temperature compensation Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 01dc889..59474ae 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2449,7 +2449,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) /* * Check if temperature compensation is supported. */ - if (tssi_bounds[4] == 0xff) + if (tssi_bounds[4] == 0xff || step == 0xff) return 0; /* -- cgit v0.10.2 From 6fe7cc71bbf3a0bc28c9cec3c00bc11e81344412 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 29 Oct 2012 13:25:20 +0100 Subject: ath9k: Test for TID only in BlockAcks while checking tx status The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Cc: stable@vger.kernel.org Acked-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 1ffca75..741918a 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -394,7 +394,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first; u32 ba[WME_BA_BMP_SIZE >> 5]; int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0; - bool rc_update = true; + bool rc_update = true, isba; struct ieee80211_tx_rate rates[4]; struct ath_frame_info *fi; int nframes; @@ -438,13 +438,17 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; tid = ATH_AN_2_TID(an, tidno); seq_first = tid->seq_start; + isba = ts->ts_flags & ATH9K_TX_BA; /* * The hardware occasionally sends a tx status for the wrong TID. * In this case, the BA status cannot be considered valid and all * subframes need to be retransmitted + * + * Only BlockAcks have a TID and therefore normal Acks cannot be + * checked */ - if (tidno != ts->tid) + if (isba && tidno != ts->tid) txok = false; isaggr = bf_isaggr(bf); -- cgit v0.10.2 From 8fcff5f13773aa3898df1d13a1615d468079cb15 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 27 Oct 2012 15:28:58 +0200 Subject: GPIO: mvebu-gpio: Don't initialize the mask_cache Due to the SMP nature of some of the chips, which have per CPU registers, the driver does not use the generic irq_gc_mask_set_bit() & irq_gc_mask_clr_bit() functions, which only support a single register. The driver has its own implementation of these functions, which can pick the correct register depending on the CPU being used. The functions do however use the gc->mask_cache value. The call to irq_setup_generic_chip() was passing IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be initialized to the contents of some random register. This resulted in unexpected interrupts been delivered from random GPIO lines. Signed-off-by: Andrew Lunn Tested-by: Jamie Lentin Acked-by: Thomas Petazzoni Tested-by: Michael Walle Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 1bb43e3..fec421f 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -643,7 +643,7 @@ static int __devinit mvebu_gpio_probe(struct platform_device *pdev) ct->handler = handle_edge_irq; ct->chip.name = mvchip->chip.label; - irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE, + irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); /* Setup irq domain on top of the generic chip. */ -- cgit v0.10.2 From 02b898f2f04e418094f0093a3ad0b415bcdbe8eb Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 31 Oct 2012 11:42:03 +1100 Subject: md/raid1: Fix assembling of arrays containing Replacements. setup_conf in raid1.c uses conf->raid_disks before assigning a value. It is used when including 'Replacement' devices. The consequence is that assembling an array which contains a replacement will misbehave and either not include the replacement, or not include the device being replaced. Though this doesn't lead directly to data corruption, it could lead to reduced data safety. So use mddev->raid_disks, which is initialised, instead. Bug was introduced by commit c19d57980b38a5bb613a898937a1cf85f422fb9b md/raid1: recognise replacements when assembling arrays. in 3.3, so fix is suitable for 3.3.y thru 3.6.y. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 8034fbd..636bae0 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2710,7 +2710,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) || disk_idx < 0) continue; if (test_bit(Replacement, &rdev->flags)) - disk = conf->mirrors + conf->raid_disks + disk_idx; + disk = conf->mirrors + mddev->raid_disks + disk_idx; else disk = conf->mirrors + disk_idx; -- cgit v0.10.2 From ed30be077e705e0dff53bfc51d23feb8aeeab78f Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Wed, 31 Oct 2012 11:42:30 +1100 Subject: MD RAID10: Fix oops when creating RAID10 arrays via dm-raid.c Commit 2863b9eb didn't take into account the changes to add TRIM support to RAID10 (commit 532a2a3fb). That is, when using dm-raid.c to create the RAID10 arrays, there is no mddev->gendisk or mddev->queue. The code added to support TRIM simply assumes that mddev->queue is available without checking. The result is an oops any time dm-raid.c attempts to create a RAID10 device. Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 906ccbd..d1295af 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1783,7 +1783,7 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); - if (blk_queue_discard(bdev_get_queue(rdev->bdev))) + if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev))) queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); print_conf(conf); @@ -3613,11 +3613,14 @@ static int run(struct mddev *mddev) discard_supported = true; } - if (discard_supported) - queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - else - queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - + if (mddev->queue) { + if (discard_supported) + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + else + queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + } /* need to check that every block has at least one working mirror */ if (!enough(conf, -1)) { printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n", -- cgit v0.10.2 From cee59f15a60cc6269a25e3f6fbf1a577d6ab8115 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 29 Oct 2012 09:03:07 +1000 Subject: drm/nouveau: silence modesetting spam on pre-gf8 chipsets Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index 347a3bd..64f7020 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -220,7 +220,7 @@ out: NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode); if (blue == 0x18) { - NV_INFO(drm, "Load detected on head A\n"); + NV_DEBUG(drm, "Load detected on head A\n"); return connector_status_connected; } @@ -338,8 +338,8 @@ nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) if (nv17_dac_sample_load(encoder) & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) { - NV_INFO(drm, "Load detected on output %c\n", - '@' + ffs(dcb->or)); + NV_DEBUG(drm, "Load detected on output %c\n", + '@' + ffs(dcb->or)); return connector_status_connected; } else { return connector_status_disconnected; @@ -413,9 +413,9 @@ static void nv04_dac_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable) @@ -461,8 +461,8 @@ static void nv04_dac_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON); } diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index da55d76..184cdf8 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -476,9 +476,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode) @@ -520,8 +520,8 @@ static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", + mode, nv_encoder->dcb->index); if (was_powersaving && is_powersaving_dpms(mode)) return; @@ -565,8 +565,8 @@ static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dfp_update_backlight(encoder, mode); nv04_dfp_update_fp_control(encoder, mode); diff --git a/drivers/gpu/drm/nouveau/nv04_tv.c b/drivers/gpu/drm/nouveau/nv04_tv.c index 099fbed..62e826a 100644 --- a/drivers/gpu/drm/nouveau/nv04_tv.c +++ b/drivers/gpu/drm/nouveau/nv04_tv.c @@ -75,8 +75,8 @@ static void nv04_tv_dpms(struct drm_encoder *encoder, int mode) struct nv04_mode_state *state = &nv04_display(dev)->mode_reg; uint8_t crtc1A; - NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n", + mode, nv_encoder->dcb->index); state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK); @@ -167,9 +167,8 @@ static void nv04_tv_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, - '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_tv_destroy(struct drm_encoder *encoder) -- cgit v0.10.2 From 1249ac592a2f995fef977be33abf077bdb57b3aa Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 30 Oct 2012 15:07:58 +1000 Subject: drm/nouveau/i2c: fix typo when checking nvio i2c port validity Reported-by: Mathieu Chouquet-Stringer Tested-by: Mathieu Chouquet-Stringer Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c index 3d2c883..dbfc2abf 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c @@ -292,7 +292,7 @@ nouveau_i2c_ctor(struct nouveau_object *parent, struct nouveau_object *engine, case DCB_I2C_NVIO_BIT: port->drive = info.drive & 0x0f; if (device->card_type < NV_D0) { - if (info.drive >= ARRAY_SIZE(nv50_i2c_port)) + if (port->drive >= ARRAY_SIZE(nv50_i2c_port)) break; port->drive = nv50_i2c_port[port->drive]; port->sense = port->drive; -- cgit v0.10.2 From a7dbf00433fa9dc6f4a3828a17d56a9df2bd06b1 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 11:19:40 +1000 Subject: drm/nouveau: allow creation of zero-sized mm Useful for places where a given chipset may or may not have a given resource, and we want to avoid having to spray checks for the mm's existance around everywhere. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/core/mm.c b/drivers/gpu/drm/nouveau/core/core/mm.c index 4d62064..a6d3cd6 100644 --- a/drivers/gpu/drm/nouveau/core/core/mm.c +++ b/drivers/gpu/drm/nouveau/core/core/mm.c @@ -218,13 +218,16 @@ nouveau_mm_init(struct nouveau_mm *mm, u32 offset, u32 length, u32 block) node = kzalloc(sizeof(*node), GFP_KERNEL); if (!node) return -ENOMEM; - node->offset = roundup(offset, mm->block_size); - node->length = rounddown(offset + length, mm->block_size) - node->offset; + + if (length) { + node->offset = roundup(offset, mm->block_size); + node->length = rounddown(offset + length, mm->block_size); + node->length -= node->offset; + } list_add_tail(&node->nl_entry, &mm->nodes); list_add_tail(&node->fl_entry, &mm->free); mm->heap_nodes++; - mm->heap_size += length; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/include/core/mm.h b/drivers/gpu/drm/nouveau/core/include/core/mm.h index 9ee9bf4..975137b 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/mm.h +++ b/drivers/gpu/drm/nouveau/core/include/core/mm.h @@ -19,7 +19,6 @@ struct nouveau_mm { u32 block_size; int heap_nodes; - u32 heap_size; }; int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block); -- cgit v0.10.2 From 5cad16acd25b16681a060d28d10eeacf98d07701 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 10:51:00 +1000 Subject: drm/nv50/fb: prevent oops on chipsets without compression tags Unconditionally create the tagram mm, even if there's zero tags. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 27fb1af..5f570806 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -219,13 +219,11 @@ nv50_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine, ((priv->base.ram.size & 0x000000ff) << 32); tags = nv_rd32(priv, 0x100320); - if (tags) { - ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); - if (ret) - return ret; + ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); + if (ret) + return ret; - nv_debug(priv, "%d compression tags\n", tags); - } + nv_debug(priv, "%d compression tags\n", tags); size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail; switch (device->chipset) { -- cgit v0.10.2 From 9430738d80223a1cd791a2baa74fa170d3df1262 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:11:15 +1000 Subject: drm/nouveau: resurrect headless mode since rework Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index d2f8ffe..0185837 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -360,23 +360,26 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nv_device(drm->device)->card_type < NV_50) - ret = nv04_display_create(dev); - else - if (nv_device(drm->device)->card_type < NV_D0) - ret = nv50_display_create(dev); - else - ret = nvd0_display_create(dev); - if (ret) - goto disp_create_err; - - if (dev->mode_config.num_crtc) { - ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (nouveau_modeset == 1) { + if (nv_device(drm->device)->card_type < NV_50) + ret = nv04_display_create(dev); + else + if (nv_device(drm->device)->card_type < NV_D0) + ret = nv50_display_create(dev); + else + ret = nvd0_display_create(dev); if (ret) - goto vblank_err; + goto disp_create_err; + + if (dev->mode_config.num_crtc) { + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (ret) + goto vblank_err; + } + + nouveau_backlight_init(dev); } - nouveau_backlight_init(dev); return 0; vblank_err: @@ -395,7 +398,8 @@ nouveau_display_destroy(struct drm_device *dev) nouveau_backlight_exit(dev); drm_vblank_cleanup(dev); - disp->dtor(dev); + if (disp->dtor) + disp->dtor(dev); drm_kms_helper_poll_fini(dev); drm_mode_config_cleanup(dev); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index ccae8c2..9cc83f1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -63,8 +63,9 @@ MODULE_PARM_DESC(noaccel, "disable kernel/abi16 acceleration"); static int nouveau_noaccel = 0; module_param_named(noaccel, nouveau_noaccel, int, 0400); -MODULE_PARM_DESC(modeset, "enable driver"); -static int nouveau_modeset = -1; +MODULE_PARM_DESC(modeset, "enable driver (default: auto, " + "0 = disabled, 1 = enabled, 2 = headless)"); +int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); static struct drm_driver driver; @@ -363,7 +364,8 @@ nouveau_drm_unload(struct drm_device *dev) nouveau_pm_fini(dev); - nouveau_display_fini(dev); + if (dev->mode_config.num_crtc) + nouveau_display_fini(dev); nouveau_display_destroy(dev); nouveau_irq_fini(dev); @@ -403,13 +405,15 @@ nouveau_drm_suspend(struct pci_dev *pdev, pm_message_t pm_state) pm_state.event == PM_EVENT_PRETHAW) return 0; - NV_INFO(drm, "suspending fbcon...\n"); - nouveau_fbcon_set_suspend(dev, 1); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "suspending fbcon...\n"); + nouveau_fbcon_set_suspend(dev, 1); - NV_INFO(drm, "suspending display...\n"); - ret = nouveau_display_suspend(dev); - if (ret) - return ret; + NV_INFO(drm, "suspending display...\n"); + ret = nouveau_display_suspend(dev); + if (ret) + return ret; + } NV_INFO(drm, "evicting buffers...\n"); ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM); @@ -445,8 +449,10 @@ fail_client: nouveau_client_init(&cli->base); } - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return ret; } @@ -486,8 +492,10 @@ nouveau_drm_resume(struct pci_dev *pdev) nouveau_irq_postinstall(dev); nouveau_pm_resume(dev); - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h index 8194712..a101699 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.h +++ b/drivers/gpu/drm/nouveau/nouveau_drm.h @@ -141,4 +141,6 @@ int nouveau_drm_resume(struct pci_dev *); nv_info((cli), fmt, ##args); \ } while (0) +extern int nouveau_modeset; + #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 9ca8afd..1d8cb50 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -61,13 +61,15 @@ nouveau_irq_handler(DRM_IRQ_ARGS) nv_subdev(pmc)->intr(nv_subdev(pmc)); - if (device->card_type >= NV_D0) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nvd0_display_intr(dev); - } else - if (device->card_type >= NV_50) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nv50_display_intr(dev); + if (dev->mode_config.num_crtc) { + if (device->card_type >= NV_D0) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nvd0_display_intr(dev); + } else + if (device->card_type >= NV_50) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nv50_display_intr(dev); + } } return IRQ_HANDLED; -- cgit v0.10.2 From e412e95a268fa8544858ebfe066826b290430d51 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:16:06 +1000 Subject: drm/nouveau: headless mode by default if pci class != vga display This is to prevent nouveau from taking over the console on headless boards such as Tesla. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 0185837..86124b1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -290,6 +290,7 @@ nouveau_display_create(struct drm_device *dev) struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_disp *pdisp = nouveau_disp(drm->device); struct nouveau_display *disp; + u32 pclass = dev->pdev->class >> 8; int ret, gen; disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL); @@ -360,7 +361,8 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nouveau_modeset == 1) { + if (nouveau_modeset == 1 || + (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) { if (nv_device(drm->device)->card_type < NV_50) ret = nv04_display_create(dev); else diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 9cc83f1..0910125 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -670,9 +670,7 @@ nouveau_drm_init(void) #ifdef CONFIG_VGA_CONSOLE if (vgacon_text_force()) nouveau_modeset = 0; - else #endif - nouveau_modeset = 1; } if (!nouveau_modeset) -- cgit v0.10.2 From 08f05c49749ee655bef921d12160960a273aad47 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 31 Oct 2012 03:37:48 +0000 Subject: Return the right error value when dup[23]() newfd argument is too large Jack Lin reports that the error return from dup3() for the RLIMIT_NOFILE case changed incorrectly after 3.6. The culprit is commit f33ff9927f42 ("take rlimit check to callers of expand_files()") which when it moved the "return -EMFILE" out to the caller, didn't notice that the dup3() had special code to turn the EMFILE return into EBADF. The replace_fd() helper that got added later then inherited the bug too. Reported-by: Jack Lin Signed-off-by: Al Viro [ Noted more bugs, wrote proper changelog, fixed up typos - Linus ] Signed-off-by: Linus Torvalds diff --git a/fs/file.c b/fs/file.c index d3b5fa8..708d997 100644 --- a/fs/file.c +++ b/fs/file.c @@ -900,7 +900,7 @@ int replace_fd(unsigned fd, struct file *file, unsigned flags) return __close_fd(files, fd); if (fd >= rlimit(RLIMIT_NOFILE)) - return -EMFILE; + return -EBADF; spin_lock(&files->file_lock); err = expand_files(files, fd); @@ -926,7 +926,7 @@ SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags) return -EINVAL; if (newfd >= rlimit(RLIMIT_NOFILE)) - return -EMFILE; + return -EBADF; spin_lock(&files->file_lock); err = expand_files(files, newfd); -- cgit v0.10.2 From 32ed1911fc79908d704023317d4ddeb3883fd07e Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Tue, 30 Oct 2012 23:39:10 -0700 Subject: Input: tsc40 - remove wrong announcement of pressure support The tsc40 driver announces it supports the pressure event, but will never send one. The announcement will cause tslib to wait for such events and sending all touch events with a pressure of 0. Removing the announcement will make tslib fall back to emulating the pressure on touch events so everything works as expected. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c index 63209aa..eb96f16 100644 --- a/drivers/input/touchscreen/tsc40.c +++ b/drivers/input/touchscreen/tsc40.c @@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv) __set_bit(BTN_TOUCH, input_dev->keybit); input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); - input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); serio_set_drvdata(serio, ptsc); -- cgit v0.10.2 From 16c2e1fae8d60a9d6d16e009a76ba3472568e094 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 31 Oct 2012 07:41:42 +0100 Subject: ALSA: ice1724: Fix rate setup after resume The rate isn't restored properly after resume since it's only set up in hw_params, and not in prepare callback. For fixing it, put the corresponding call to resume callback as well. Reported-and-tested-by: Ondrej Zary Signed-off-by: Takashi Iwai diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 3050a52..245d874 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -2859,7 +2859,12 @@ static int snd_vt1724_resume(struct device *dev) ice->set_spdif_clock(ice, 0); } else { /* internal on-card clock */ - snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1); + int rate; + if (ice->cur_rate) + rate = ice->cur_rate; + else + rate = ice->pro_rate_default; + snd_vt1724_set_pro_rate(ice, rate, 1); } update_spdif_bits(ice, ice->pm_saved_spdif_ctrl); -- cgit v0.10.2 From 3ccc60f9d8c39180c205dba1a020735bda1b2491 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Oct 2012 13:28:46 +0200 Subject: HID: microsoft: fix invalid rdesc for 3k kbd Microsoft Digital Media Keyboard 3000 has two interfaces, and the second one has a report descriptor with a bug. The second collection says: 05 01 -- global; usage page -- 01 -- Generic Desktop Controls 09 80 -- local; usage -- 80 -- System Control a1 01 -- main; collection -- 01 -- application 85 03 -- global; report ID -- 03 19 00 -- local; Usage Minimum -- 00 29 ff -- local; Usage Maximum -- ff 15 00 -- global; Logical Minimum -- 0 26 ff 00 -- global; Logical Maximum -- ff 81 00 -- main; input c0 -- main; End Collection I.e. it makes us think that there are all kinds of usages of system control. That the keyboard is a not only a keyboard, but also a joystick, mouse, gamepad, keypad, etc. The same as for the Wireless Desktop Receiver, this should be Physical Min/Max. So fix that appropriately. References: https://bugzilla.novell.com/show_bug.cgi?id=776834 Cc: Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 3acdcfc..f676c01 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -28,22 +28,30 @@ #define MS_RDESC 0x08 #define MS_NOGET 0x10 #define MS_DUPLICATE_USAGES 0x20 +#define MS_RDESC_3K 0x40 -/* - * Microsoft Wireless Desktop Receiver (Model 1028) has - * 'Usage Min/Max' where it ought to have 'Physical Min/Max' - */ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); + /* + * Microsoft Wireless Desktop Receiver (Model 1028) has + * 'Usage Min/Max' where it ought to have 'Physical Min/Max' + */ if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n"); rdesc[557] = 0x35; rdesc[559] = 0x45; } + /* the same as above (s/usage/physical/) */ + if ((quirks & MS_RDESC_3K) && *rsize == 106 && + !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, + &rdesc[94], 4)) { + rdesc[94] = 0x35; + rdesc[96] = 0x45; + } return rdesc; } @@ -192,7 +200,7 @@ static const struct hid_device_id ms_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB), .driver_data = MS_PRESENTER }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K), - .driver_data = MS_ERGONOMY }, + .driver_data = MS_ERGONOMY | MS_RDESC_3K }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0), .driver_data = MS_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500), -- cgit v0.10.2 From 65b258e9b57980c8241342928d5cd717ee11a68b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 25 Oct 2012 15:35:25 +0100 Subject: HID: multitouch: put the case in the right switch statement Signed-off-by: Alan Cox Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 3eb02b9..c97011c 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -421,11 +421,11 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, * contact max are global to the report */ td->last_field_index = field->index; return -1; - } case HID_DG_TOUCH: /* Legacy devices use TIPSWITCH and not TOUCH. * Let's just ignore this field. */ return -1; + } /* let hid-input decide for the others */ return 0; -- cgit v0.10.2 From 58ad34bf62b9fc52c04e6aabe3ad5a47e4a00dc1 Mon Sep 17 00:00:00 2001 From: Xianhan Yu Date: Mon, 29 Oct 2012 23:04:37 +0800 Subject: HID: multitouch: fix maxcontacts problem on GeneralTouch Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen. Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We fix the device that driver can get maxcontact from our device, hence it doesn't need .maxcontact=10. Now there is just one device class can fix all our PWT touchscreen. Signed-off-by: Xianhan Yu Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index c97011c..7867d69 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -210,8 +210,7 @@ static struct mt_class mt_classes[] = { }, { .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | - MT_QUIRK_SLOT_IS_CONTACTNUMBER, - .maxcontacts = 10 + MT_QUIRK_SLOT_IS_CONTACTNUMBER }, { .name = MT_CLS_FLATFROG, -- cgit v0.10.2 From 8d80da90f53d37cf6caefc61353e1cc3a145b9e0 Mon Sep 17 00:00:00 2001 From: Dirk Hohndel Date: Tue, 30 Oct 2012 11:11:48 -0700 Subject: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 06ebdbb..fd7722a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -522,6 +522,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index bd3971b..f4109fd 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1532,6 +1532,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, @@ -2139,6 +2142,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 269b509..9d7a428 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -118,6 +118,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a #define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3a78f23..2baff1b 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -84,6 +84,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 #define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 +/* MacbookPro10,2 (unibody, October 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -137,6 +141,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), + /* MacbookPro10,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), /* Terminating entry */ {} }; @@ -379,6 +387,19 @@ static const struct bcm5974_config bcm5974_config_table[] = { { SN_COORD, -150, 6730 }, { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, {} }; -- cgit v0.10.2 From 0d935c16b779db481715b9885f2fd3d20a70bf79 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 30 Oct 2012 15:04:01 +0530 Subject: ARM: dts: AM33XX: Add rtc node Add am33xx rtc node. Signed-off-by: Afzal Mohammed [b-cousson@ti.com: Update the subject] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 70d24b8..97a7bd3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -291,5 +291,13 @@ ti,hwmods = "timer7"; ti,timer-pwm; }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; }; }; -- cgit v0.10.2 From 44c91697fb1add76f9f8c28c0d21b82b05b5d4cb Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Thu, 18 Oct 2012 18:59:55 +0900 Subject: drm/exynos: fix display on issue When crtc_funcs->dpms callback is called, exynos_crtc->dpms and exynos_encoder->dpms are changed to new mode. But if user requests dpms mode operation, OFF -> ON, when crtc's dpms callback is called, exynos_encoder->dpms is also changed to ON. This makes encoder's dpms callback call be ignored so display power couldn't become on again. This patch removes exynos_encoder->dpms changing and adds 'updated' variable to exynos_drm_encoder structure to avoid duplicated overlay updating. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 18c2718..0f68a28 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -374,6 +374,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, exynos_connector->encoder_id = encoder->base.id; exynos_connector->manager = manager; exynos_connector->dpms = DRM_MODE_DPMS_OFF; + connector->dpms = DRM_MODE_DPMS_OFF; connector->encoder = encoder; err = drm_mode_connector_attach_encoder(connector, encoder); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index e51503f..241ad1e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -43,12 +43,14 @@ * @manager: specific encoder has its own manager to control a hardware * appropriately and we can access a hardware drawing on this manager. * @dpms: store the encoder dpms value. + * @updated: indicate whether overlay data updating is needed or not. */ struct exynos_drm_encoder { struct drm_crtc *old_crtc; struct drm_encoder drm_encoder; struct exynos_drm_manager *manager; - int dpms; + int dpms; + bool updated; }; static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode) @@ -85,7 +87,9 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: if (manager_ops && manager_ops->apply) - manager_ops->apply(manager->dev); + if (!exynos_encoder->updated) + manager_ops->apply(manager->dev); + exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; break; @@ -94,6 +98,7 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_OFF: exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; + exynos_encoder->updated = false; break; default: DRM_ERROR("unspecified mode %d\n", mode); @@ -205,13 +210,22 @@ static void exynos_drm_encoder_prepare(struct drm_encoder *encoder) static void exynos_drm_encoder_commit(struct drm_encoder *encoder) { - struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); + struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder); + struct exynos_drm_manager *manager = exynos_encoder->manager; struct exynos_drm_manager_ops *manager_ops = manager->ops; DRM_DEBUG_KMS("%s\n", __FILE__); if (manager_ops && manager_ops->commit) manager_ops->commit(manager->dev); + + /* + * this will avoid one issue that overlay data is updated to + * real hardware two times. + * And this variable will be used to check if the data was + * already updated or not by exynos_drm_encoder_dpms function. + */ + exynos_encoder->updated = true; } static void exynos_drm_encoder_disable(struct drm_encoder *encoder) @@ -401,19 +415,6 @@ void exynos_drm_encoder_crtc_dpms(struct drm_encoder *encoder, void *data) manager_ops->dpms(manager->dev, mode); /* - * set current mode to new one so that data aren't updated into - * registers by drm_helper_connector_dpms two times. - * - * in case that drm_crtc_helper_set_mode() is called, - * overlay_ops->commit() and manager_ops->commit() callbacks - * can be called two times, first at drm_crtc_helper_set_mode() - * and second at drm_helper_connector_dpms(). - * so with this setting, when drm_helper_connector_dpms() is called - * encoder->funcs->dpms() will be ignored. - */ - exynos_encoder->dpms = mode; - - /* * if this condition is ok then it means that the crtc is already * detached from encoder and last function for detaching is properly * done, so clear pipe from manager to prevent repeated call. -- cgit v0.10.2 From 25a5803037cbe4dedd96011293c94982860785fc Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 30 Oct 2012 16:08:05 +0900 Subject: MAINTAINERS: Add git repository for Exynos DRM Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/MAINTAINERS b/MAINTAINERS index 1fa9074..a6391ce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2507,6 +2507,7 @@ M: Joonyoung Shim M: Seung-Woo Kim M: Kyungmin Park L: dri-devel@lists.freedesktop.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* -- cgit v0.10.2 From 9eb3e9e6f3cface0d2ffa8d889f44af27dcbce7b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 29 Oct 2012 09:31:13 +0100 Subject: drm/exynos: add support for ARCH_MULTIPLATFORM Exynos does not seem to have any dependency on anything from platform headers so just needs Kconfig updated to build in ARCH_MULTIPLATFORM builds. Signed-off-by: Rob Clark Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 59a26e5..fc345d4 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -1,6 +1,6 @@ config DRM_EXYNOS tristate "DRM Support for Samsung SoC EXYNOS Series" - depends on DRM && PLAT_SAMSUNG + depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM) select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA -- cgit v0.10.2 From 2cdc53b355873ab54b6a348ee5bf022967fb4159 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Wed, 31 Oct 2012 09:36:26 +0530 Subject: drm: exynos: removed warning due to missing typecast for mixer driver data Removing the warning by adding proper type casting where local pointer variable of type mixer driver data is assigned with void pointer. Signed-off-by: Rahul Sharma Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 614b2e9..e7fbb82 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1142,7 +1142,7 @@ static int __devinit mixer_probe(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), pdev->dev.of_node); - drv = match->data; + drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; -- cgit v0.10.2 From 95a7d76897c1e7243d4137037c66d15cbf2cce76 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 31 Oct 2012 12:38:31 -0400 Subject: xen/mmu: Use Xen specific TLB flush instead of the generic one. As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by: Jingjie Jiang Suggested-by: Mukesh Rathor Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 6226c99..dcf5f2d 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1288,6 +1288,25 @@ unsigned long xen_read_cr2_direct(void) return this_cpu_read(xen_vcpu_info.arch.cr2); } +void xen_flush_tlb_all(void) +{ + struct mmuext_op *op; + struct multicall_space mcs; + + trace_xen_mmu_flush_tlb_all(0); + + preempt_disable(); + + mcs = xen_mc_entry(sizeof(*op)); + + op = mcs.args; + op->cmd = MMUEXT_TLB_FLUSH_ALL; + MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); + + xen_mc_issue(PARAVIRT_LAZY_MMU); + + preempt_enable(); +} static void xen_flush_tlb(void) { struct mmuext_op *op; @@ -2518,7 +2537,7 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma, err = 0; out: - flush_tlb_all(); + xen_flush_tlb_all(); return err; } diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h index 15ba03b..d06b6da 100644 --- a/include/trace/events/xen.h +++ b/include/trace/events/xen.h @@ -377,6 +377,14 @@ DECLARE_EVENT_CLASS(xen_mmu_pgd, DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin); DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin); +TRACE_EVENT(xen_mmu_flush_tlb_all, + TP_PROTO(int x), + TP_ARGS(x), + TP_STRUCT__entry(__array(char, x, 0)), + TP_fast_assign((void)x), + TP_printk("%s", "") + ); + TRACE_EVENT(xen_mmu_flush_tlb, TP_PROTO(int x), TP_ARGS(x), -- cgit v0.10.2 From 399f11c3d872bd748e1575574de265a6304c7c43 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Tue, 30 Oct 2012 16:06:35 -0400 Subject: NFS: Wait for session recovery to finish before returning Currently, we will schedule session recovery and then return to the caller of nfs4_handle_exception. This works for most cases, but causes a hang on the following test case: Client Server ------ ------ Open file over NFS v4.1 Write to file Expire client Try to lock file The server will return NFS4ERR_BADSESSION, prompting the client to schedule recovery. However, the client will continue placing lock attempts and the open recovery never seems to be scheduled. The simplest solution is to wait for session recovery to run before retrying the lock. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 68b21d8..d5fbf1f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -339,8 +339,7 @@ static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struc dprintk("%s ERROR: %d Reset session\n", __func__, errorcode); nfs4_schedule_session_recovery(clp->cl_session, errorcode); - exception->retry = 1; - break; + goto wait_on_recovery; #endif /* defined(CONFIG_NFS_V4_1) */ case -NFS4ERR_FILE_OPEN: if (exception->timeout > HZ) { -- cgit v0.10.2 From 3c172868cbbe3eb138fd57bb346c77dffb22b182 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 26 Oct 2012 06:24:34 +0000 Subject: vxlan: don't expire permanent entries VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 607976c..7b4adde 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -816,7 +816,7 @@ static void vxlan_cleanup(unsigned long arg) = container_of(p, struct vxlan_fdb, hlist); unsigned long timeout; - if (f->state == NUD_PERMANENT) + if (f->state & NUD_PERMANENT) continue; timeout = f->used + vxlan->age_interval * HZ; -- cgit v0.10.2 From 2240a9e2d013d8269ea425b73e1d7a54c7bc141f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 18:37:40 -0400 Subject: NFSv4.1: We must release the sequence id when we fail to get a session slot If we do not release the sequence id in cases where we fail to get a session slot, then we can deadlock if we hit a recovery scenario. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index d5fbf1f..e0423bb 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1571,9 +1571,11 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) data->timestamp = jiffies; if (nfs4_setup_sequence(data->o_arg.server, &data->o_arg.seq_args, - &data->o_res.seq_res, task)) - return; - rpc_call_start(task); + &data->o_res.seq_res, + task) != 0) + nfs_release_seqid(data->o_arg.seqid); + else + rpc_call_start(task); return; unlock_no_action: rcu_read_unlock(); @@ -2295,9 +2297,10 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) if (nfs4_setup_sequence(NFS_SERVER(inode), &calldata->arg.seq_args, &calldata->res.seq_res, - task)) - goto out; - rpc_call_start(task); + task) != 0) + nfs_release_seqid(calldata->arg.seqid); + else + rpc_call_start(task); out: dprintk("%s: done!\n", __func__); } @@ -4544,9 +4547,11 @@ static void nfs4_locku_prepare(struct rpc_task *task, void *data) calldata->timestamp = jiffies; if (nfs4_setup_sequence(calldata->server, &calldata->arg.seq_args, - &calldata->res.seq_res, task)) - return; - rpc_call_start(task); + &calldata->res.seq_res, + task) != 0) + nfs_release_seqid(calldata->arg.seqid); + else + rpc_call_start(task); } static const struct rpc_call_ops nfs4_locku_ops = { @@ -4691,7 +4696,7 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata) /* Do we need to do an open_to_lock_owner? */ if (!(data->arg.lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)) { if (nfs_wait_on_sequence(data->arg.open_seqid, task) != 0) - return; + goto out_release_lock_seqid; data->arg.open_stateid = &state->stateid; data->arg.new_lock_owner = 1; data->res.open_seqid = data->arg.open_seqid; @@ -4700,10 +4705,15 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata) data->timestamp = jiffies; if (nfs4_setup_sequence(data->server, &data->arg.seq_args, - &data->res.seq_res, task)) + &data->res.seq_res, + task) == 0) { + rpc_call_start(task); return; - rpc_call_start(task); - dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status); + } + nfs_release_seqid(data->arg.open_seqid); +out_release_lock_seqid: + nfs_release_seqid(data->arg.lock_seqid); + dprintk("%s: done!, ret = %d\n", __func__, task->tk_status); } static void nfs4_recover_lock_prepare(struct rpc_task *task, void *calldata) -- cgit v0.10.2 From 2b1bc308f492589f7d49012ed24561534ea2be8c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 18:53:23 -0400 Subject: NFSv4: nfs4_locku_done must release the sequence id If the state recovery machinery is triggered by the call to nfs4_async_handle_error() then we can deadlock. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index e0423bb..1465364 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4531,6 +4531,7 @@ static void nfs4_locku_done(struct rpc_task *task, void *data) if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN) rpc_restart_call_prepare(task); } + nfs_release_seqid(calldata->arg.seqid); } static void nfs4_locku_prepare(struct rpc_task *task, void *data) -- cgit v0.10.2 From 29c4bcddaa62e2b9fd2ba85668f6718b0b43f0e3 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 31 Oct 2012 00:30:38 +0100 Subject: cpufreq / powernow-k8: Change maintainer's email address Change the Andreas' email address in drivers/cpufreq/powernow-k8.c. Signed-off-by: Andreas Herrmann Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c16a3a5..e3ebb4f 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -5,7 +5,7 @@ * http://www.gnu.org/licenses/gpl.html * * Maintainer: - * Andreas Herrmann + * Andreas Herrmann * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones on behalf of SuSE Labs -- cgit v0.10.2 From 8d96b10639fb402357b75b055b1e82a65ff95050 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 31 Oct 2012 12:16:01 +1100 Subject: NFS: fix bug in legacy DNS resolver. The DNS resolver's use of the sunrpc cache involves a 'ttl' number (relative) rather that a timeout (absolute). This confused me when I wrote commit c5b29f885afe890f953f7f23424045cdad31d3e4 "sunrpc: use seconds since boot in expiry cache" and I managed to break it. The effect is that any TTL is interpreted as 0, and nothing useful gets into the cache. This patch removes the use of get_expiry() - which really expects an expiry time - and uses get_uint() instead, treating the int correctly as a ttl. This fixes a regression that has been present since 2.6.37, causing certain NFS accesses in certain environments to incorrectly fail. Reported-by: Chuck Lever Tested-by: Chuck Lever Cc: stable@vger.kernel.org Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c index 31c26c4..ca4b11e 100644 --- a/fs/nfs/dns_resolve.c +++ b/fs/nfs/dns_resolve.c @@ -217,7 +217,7 @@ static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen) { char buf1[NFS_DNS_HOSTNAME_MAXLEN+1]; struct nfs_dns_ent key, *item; - unsigned long ttl; + unsigned int ttl; ssize_t len; int ret = -EINVAL; @@ -240,7 +240,8 @@ static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen) key.namelen = len; memset(&key.h, 0, sizeof(key.h)); - ttl = get_expiry(&buf); + if (get_uint(&buf, &ttl) < 0) + goto out; if (ttl == 0) goto out; key.h.expiry_time = ttl + seconds_since_boot(); -- cgit v0.10.2 From 7175fe90153e6375082d65884fbb41ab3bbb4901 Mon Sep 17 00:00:00 2001 From: Yanchuan Nian Date: Wed, 31 Oct 2012 16:05:48 +0800 Subject: nfs: Check whether a layout pointer is NULL before free it The new layout pointer in pnfs_find_alloc_layout() may be NULL because of out of memory. we must do some check work, otherwise pnfs_free_layout_hdr() will go wrong because it can not deal with a NULL pointer. Signed-off-by: Yanchuan Nian Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index fe624c9..2878f97 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -925,8 +925,8 @@ pnfs_find_alloc_layout(struct inode *ino, if (likely(nfsi->layout == NULL)) { /* Won the race? */ nfsi->layout = new; return new; - } - pnfs_free_layout_hdr(new); + } else if (new != NULL) + pnfs_free_layout_hdr(new); out_existing: pnfs_get_layout_hdr(nfsi->layout); return nfsi->layout; -- cgit v0.10.2 From acce94e68a0f346115fd41cdc298197d2d5a59ad Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Tue, 16 Oct 2012 13:22:19 -0400 Subject: nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts In very busy v3 environment, rpc.mountd can respond to the NULL procedure but not the MNT procedure in a timely manner causing the MNT procedure to time out. The problem is the mount system call returns EIO which causes the mount to fail, instead of ETIMEDOUT, which would cause the mount to be retried. This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to the rpc_call_sync() call in nfs_mount() which causes ETIMEDOUT to be returned on timed out connections. Signed-off-by: Steve Dickson Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c index 8e65c7f..015f71f 100644 --- a/fs/nfs/mount_clnt.c +++ b/fs/nfs/mount_clnt.c @@ -181,7 +181,7 @@ int nfs_mount(struct nfs_mount_request *info) else msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT]; - status = rpc_call_sync(mnt_clnt, &msg, 0); + status = rpc_call_sync(mnt_clnt, &msg, RPC_TASK_SOFT|RPC_TASK_TIMEOUT); rpc_shutdown_client(mnt_clnt); if (status < 0) -- cgit v0.10.2 From 97a54868262da1629a3e65121e65b8e8c4419d9f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 21 Oct 2012 19:23:52 +0100 Subject: nfs: Show original device name verbatim in /proc/*/mount{s,info} Since commit c7f404b ('vfs: new superblock methods to override /proc/*/mount{s,info}'), nfs_path() is used to generate the mounted device name reported back to userland. nfs_path() always generates a trailing slash when the given dentry is the root of an NFS mount, but userland may expect the original device name to be returned verbatim (as it used to be). Make this canonicalisation optional and change the callers accordingly. [jrnieder@gmail.com: use flag instead of bool argument] Reported-and-tested-by: Chris Hiestand Reference: http://bugs.debian.org/669314 Signed-off-by: Ben Hutchings Cc: # v2.6.39+ Signed-off-by: Jonathan Nieder Signed-off-by: Trond Myklebust diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 59b133c..a54fe51 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -353,8 +353,9 @@ extern void nfs_sb_active(struct super_block *sb); extern void nfs_sb_deactive(struct super_block *sb); /* namespace.c */ +#define NFS_PATH_CANONICAL 1 extern char *nfs_path(char **p, struct dentry *dentry, - char *buffer, ssize_t buflen); + char *buffer, ssize_t buflen, unsigned flags); extern struct vfsmount *nfs_d_automount(struct path *path); struct vfsmount *nfs_submount(struct nfs_server *, struct dentry *, struct nfs_fh *, struct nfs_fattr *); @@ -498,7 +499,7 @@ static inline char *nfs_devname(struct dentry *dentry, char *buffer, ssize_t buflen) { char *dummy; - return nfs_path(&dummy, dentry, buffer, buflen); + return nfs_path(&dummy, dentry, buffer, buflen, NFS_PATH_CANONICAL); } /* diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 6559253..dd057bc 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -33,6 +33,7 @@ int nfs_mountpoint_expiry_timeout = 500 * HZ; * @dentry - pointer to dentry * @buffer - result buffer * @buflen - length of buffer + * @flags - options (see below) * * Helper function for constructing the server pathname * by arbitrary hashed dentry. @@ -40,8 +41,14 @@ int nfs_mountpoint_expiry_timeout = 500 * HZ; * This is mainly for use in figuring out the path on the * server side when automounting on top of an existing partition * and in generating /proc/mounts and friends. + * + * Supported flags: + * NFS_PATH_CANONICAL: ensure there is exactly one slash after + * the original device (export) name + * (if unset, the original name is returned verbatim) */ -char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen) +char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen, + unsigned flags) { char *end; int namelen; @@ -74,7 +81,7 @@ rename_retry: rcu_read_unlock(); goto rename_retry; } - if (*end != '/') { + if ((flags & NFS_PATH_CANONICAL) && *end != '/') { if (--buflen < 0) { spin_unlock(&dentry->d_lock); rcu_read_unlock(); @@ -91,9 +98,11 @@ rename_retry: return end; } namelen = strlen(base); - /* Strip off excess slashes in base string */ - while (namelen > 0 && base[namelen - 1] == '/') - namelen--; + if (flags & NFS_PATH_CANONICAL) { + /* Strip off excess slashes in base string */ + while (namelen > 0 && base[namelen - 1] == '/') + namelen--; + } buflen -= namelen; if (buflen < 0) { spin_unlock(&dentry->d_lock); diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 79fbb61..1e09eb7 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -81,7 +81,8 @@ static char *nfs_path_component(const char *nfspath, const char *end) static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen) { char *limit; - char *path = nfs_path(&limit, dentry, buffer, buflen); + char *path = nfs_path(&limit, dentry, buffer, buflen, + NFS_PATH_CANONICAL); if (!IS_ERR(path)) { char *path_component = nfs_path_component(path, limit); if (path_component) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index e831bce..13c2a5b 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -771,7 +771,7 @@ int nfs_show_devname(struct seq_file *m, struct dentry *root) int err = 0; if (!page) return -ENOMEM; - devname = nfs_path(&dummy, root, page, PAGE_SIZE); + devname = nfs_path(&dummy, root, page, PAGE_SIZE, 0); if (IS_ERR(devname)) err = PTR_ERR(devname); else -- cgit v0.10.2 From 324d003b0cd82151adbaecefef57b73f7959a469 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Tue, 30 Oct 2012 17:01:39 -0400 Subject: NFS: add nfs_sb_deactive_async to avoid deadlock Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue context. This avoids a deadlock where rpc_shutdown_client loops forever in a workqueue kworker context, trying to kill all RPC tasks associated with the client, while one or more of these tasks have already been assigned to the same kworker (and will never run rpc_exit_task). This approach is needed because RPC tasks that have already been assigned to a kworker by queue_work cannot be canceled, as explained in the comment for workqueue.c:insert_wq_barrier. Signed-off-by: Weston Andros Adamson [Trond: add module_get/put.] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 5c7325c..6fa01ae 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -685,7 +685,10 @@ static void __put_nfs_open_context(struct nfs_open_context *ctx, int is_sync) if (ctx->cred != NULL) put_rpccred(ctx->cred); dput(ctx->dentry); - nfs_sb_deactive(sb); + if (is_sync) + nfs_sb_deactive(sb); + else + nfs_sb_deactive_async(sb); kfree(ctx->mdsthreshold); kfree(ctx); } diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index a54fe51..05521ca 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -351,6 +351,7 @@ extern int __init register_nfs_fs(void); extern void __exit unregister_nfs_fs(void); extern void nfs_sb_active(struct super_block *sb); extern void nfs_sb_deactive(struct super_block *sb); +extern void nfs_sb_deactive_async(struct super_block *sb); /* namespace.c */ #define NFS_PATH_CANONICAL 1 diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1465364..8cfbac1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2197,7 +2197,7 @@ static void nfs4_free_closedata(void *data) nfs4_put_open_state(calldata->state); nfs_free_seqid(calldata->arg.seqid); nfs4_put_state_owner(sp); - nfs_sb_deactive(sb); + nfs_sb_deactive_async(sb); kfree(calldata); } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 13c2a5b..652d3f7 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -54,6 +54,7 @@ #include #include #include +#include #include @@ -415,6 +416,54 @@ void nfs_sb_deactive(struct super_block *sb) } EXPORT_SYMBOL_GPL(nfs_sb_deactive); +static int nfs_deactivate_super_async_work(void *ptr) +{ + struct super_block *sb = ptr; + + deactivate_super(sb); + module_put_and_exit(0); + return 0; +} + +/* + * same effect as deactivate_super, but will do final unmount in kthread + * context + */ +static void nfs_deactivate_super_async(struct super_block *sb) +{ + struct task_struct *task; + char buf[INET6_ADDRSTRLEN + 1]; + struct nfs_server *server = NFS_SB(sb); + struct nfs_client *clp = server->nfs_client; + + if (!atomic_add_unless(&sb->s_active, -1, 1)) { + rcu_read_lock(); + snprintf(buf, sizeof(buf), + rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR)); + rcu_read_unlock(); + + __module_get(THIS_MODULE); + task = kthread_run(nfs_deactivate_super_async_work, sb, + "%s-deactivate-super", buf); + if (IS_ERR(task)) { + pr_err("%s: kthread_run: %ld\n", + __func__, PTR_ERR(task)); + /* make synchronous call and hope for the best */ + deactivate_super(sb); + module_put(THIS_MODULE); + } + } +} + +void nfs_sb_deactive_async(struct super_block *sb) +{ + struct nfs_server *server = NFS_SB(sb); + + if (atomic_dec_and_test(&server->active)) + nfs_deactivate_super_async(sb); +} +EXPORT_SYMBOL_GPL(nfs_sb_deactive_async); + /* * Deliver file system statistics to userspace */ diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c index 13cea63..3f79c77 100644 --- a/fs/nfs/unlink.c +++ b/fs/nfs/unlink.c @@ -95,7 +95,7 @@ static void nfs_async_unlink_release(void *calldata) nfs_dec_sillycount(data->dir); nfs_free_unlinkdata(data); - nfs_sb_deactive(sb); + nfs_sb_deactive_async(sb); } static void nfs_unlink_prepare(struct rpc_task *task, void *calldata) -- cgit v0.10.2 From 87da7e66a40532b743cd50972fcf85a1f15b14ea Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 24 Oct 2012 14:07:59 +0800 Subject: KVM: x86: fix vcpu->mmio_fragments overflow After commit b3356bf0dbb349 (KVM: emulator: optimize "rep ins" handling), the pieces of io data can be collected and write them to the guest memory or MMIO together Unfortunately, kvm splits the mmio access into 8 bytes and store them to vcpu->mmio_fragments. If the guest uses "rep ins" to move large data, it will cause vcpu->mmio_fragments overflow The bug can be exposed by isapc (-M isapc): [23154.818733] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ ......] [23154.858083] Call Trace: [23154.859874] [] kvm_get_cr8+0x1d/0x28 [kvm] [23154.861677] [] kvm_arch_vcpu_ioctl_run+0xcda/0xe45 [kvm] [23154.863604] [] ? kvm_arch_vcpu_load+0x17b/0x180 [kvm] Actually, we can use one mmio_fragment to store a large mmio access then split it when we pass the mmio-exit-info to userspace. After that, we only need two entries to store mmio info for the cross-mmio pages access Signed-off-by: Xiao Guangrong Signed-off-by: Marcelo Tosatti diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 1eefebe..224a7e7 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3779,7 +3779,7 @@ static int write_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa, { struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0]; - memcpy(vcpu->run->mmio.data, frag->data, frag->len); + memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len)); return X86EMUL_CONTINUE; } @@ -3832,18 +3832,11 @@ mmio: bytes -= handled; val += handled; - while (bytes) { - unsigned now = min(bytes, 8U); - - frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++]; - frag->gpa = gpa; - frag->data = val; - frag->len = now; - - gpa += now; - val += now; - bytes -= now; - } + WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS); + frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++]; + frag->gpa = gpa; + frag->data = val; + frag->len = bytes; return X86EMUL_CONTINUE; } @@ -3890,7 +3883,7 @@ int emulator_read_write(struct x86_emulate_ctxt *ctxt, unsigned long addr, vcpu->mmio_needed = 1; vcpu->mmio_cur_fragment = 0; - vcpu->run->mmio.len = vcpu->mmio_fragments[0].len; + vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len); vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write; vcpu->run->exit_reason = KVM_EXIT_MMIO; vcpu->run->mmio.phys_addr = gpa; @@ -5522,28 +5515,44 @@ static int complete_emulated_pio(struct kvm_vcpu *vcpu) * * read: * for each fragment - * write gpa, len - * exit - * copy data + * for each mmio piece in the fragment + * write gpa, len + * exit + * copy data * execute insn * * write: * for each fragment - * write gpa, len - * copy data - * exit + * for each mmio piece in the fragment + * write gpa, len + * copy data + * exit */ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) { struct kvm_run *run = vcpu->run; struct kvm_mmio_fragment *frag; + unsigned len; BUG_ON(!vcpu->mmio_needed); /* Complete previous fragment */ - frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++]; + frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment]; + len = min(8u, frag->len); if (!vcpu->mmio_is_write) - memcpy(frag->data, run->mmio.data, frag->len); + memcpy(frag->data, run->mmio.data, len); + + if (frag->len <= 8) { + /* Switch to the next fragment. */ + frag++; + vcpu->mmio_cur_fragment++; + } else { + /* Go forward to the next mmio piece. */ + frag->data += len; + frag->gpa += len; + frag->len -= len; + } + if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) { vcpu->mmio_needed = 0; if (vcpu->mmio_is_write) @@ -5551,13 +5560,12 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) vcpu->mmio_read_completed = 1; return complete_emulated_io(vcpu); } - /* Initiate next fragment */ - ++frag; + run->exit_reason = KVM_EXIT_MMIO; run->mmio.phys_addr = frag->gpa; if (vcpu->mmio_is_write) - memcpy(run->mmio.data, frag->data, frag->len); - run->mmio.len = frag->len; + memcpy(run->mmio.data, frag->data, min(8u, frag->len)); + run->mmio.len = min(8u, frag->len); run->mmio.is_write = vcpu->mmio_is_write; vcpu->arch.complete_userspace_io = complete_emulated_mmio; return 0; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 93bfc9f..ecc5543 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -42,19 +42,8 @@ */ #define KVM_MEMSLOT_INVALID (1UL << 16) -/* - * If we support unaligned MMIO, at most one fragment will be split into two: - */ -#ifdef KVM_UNALIGNED_MMIO -# define KVM_EXTRA_MMIO_FRAGMENTS 1 -#else -# define KVM_EXTRA_MMIO_FRAGMENTS 0 -#endif - -#define KVM_USER_MMIO_SIZE 8 - -#define KVM_MAX_MMIO_FRAGMENTS \ - (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS) +/* Two fragments for cross MMIO pages. */ +#define KVM_MAX_MMIO_FRAGMENTS 2 /* * For the normal pfn, the highest 12 bits should be zero, -- cgit v0.10.2 From dea5f0998aa82bdeca260b87c653db11e91329b2 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 31 Oct 2012 22:04:26 -0700 Subject: target: Re-add explict zeroing of INQUIRY bounce buffer memory This patch fixes a regression in spc_emulate_inquiry() code where the local scope bounce buffer was no longer getting it's memory zeroed, causing various problems with SCSI initiators that depend upon areas of INQUIRY EVPD=0x83 payload having been zeroed. This bug was introduced with the following v3.7-rc1 patch + CC'ed stable commit: commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 Author: Paolo Bonzini Date: Fri Sep 7 17:30:38 2012 +0200 target: support zero allocation length in INQUIRY Go ahead and re-add the missing memset of bounce buffer memory to be copied into the outgoing se_cmd descriptor kmapped SGL payload. Reported-by: Kelsey Prantis Cc: Kelsey Prantis Cc: Paolo Bonzini Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 9229bd9..6fd434d 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -605,6 +605,8 @@ static int spc_emulate_inquiry(struct se_cmd *cmd) unsigned char buf[SE_INQUIRY_BUF]; int p, ret; + memset(buf, 0, SE_INQUIRY_BUF); + if (dev == tpg->tpg_virt_lun0.lun_se_dev) buf[0] = 0x3f; /* Not connected */ else -- cgit v0.10.2 From 0d0f9dfb31e0a6c92063e235417b42df185b3275 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:44 -0700 Subject: target: Don't return success from module_init() if setup fails If the call to core_dev_release_virtual_lun0() fails, then nothing sets ret to anything other than 0, so even though everything is torn down and freed, target_core_init_configfs() will seem to succeed and the module will be loaded. Fix this by passing the return value on up the chain. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 015f5be..c123327 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -3206,7 +3206,8 @@ static int __init target_core_init_configfs(void) if (ret < 0) goto out; - if (core_dev_setup_virtual_lun0() < 0) + ret = core_dev_setup_virtual_lun0(); + if (ret < 0) goto out; return 0; -- cgit v0.10.2 From 3e03989b5868acf69a391a424dc71fcd6cc48167 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:45 -0700 Subject: target: Avoid integer overflow in se_dev_align_max_sectors() The expression (max_sectors * block_size) might overflow a u32 (indeed, since iblock sets max_hw_sectors to UINT_MAX, it is guaranteed to overflow and end up with a much-too-small result in many common cases). Fix this by doing an equivalent calculation that doesn't require multiplication. While we're touching this code, avoid splitting a printk format across two lines and use pr_info(...) instead of printk(KERN_INFO ...). Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8d774da..9abef9f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -850,20 +850,20 @@ int se_dev_check_shutdown(struct se_device *dev) static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size) { - u32 tmp, aligned_max_sectors; + u32 aligned_max_sectors; + u32 alignment; /* * Limit max_sectors to a PAGE_SIZE aligned value for modern * transport_allocate_data_tasks() operation. */ - tmp = rounddown((max_sectors * block_size), PAGE_SIZE); - aligned_max_sectors = (tmp / block_size); - if (max_sectors != aligned_max_sectors) { - printk(KERN_INFO "Rounding down aligned max_sectors from %u" - " to %u\n", max_sectors, aligned_max_sectors); - return aligned_max_sectors; - } + alignment = max(1ul, PAGE_SIZE / block_size); + aligned_max_sectors = rounddown(max_sectors, alignment); + + if (max_sectors != aligned_max_sectors) + pr_info("Rounding down aligned max_sectors from %u to %u\n", + max_sectors, aligned_max_sectors); - return max_sectors; + return aligned_max_sectors; } void se_dev_set_default_attribs( -- cgit v0.10.2 From d5627acba9ae584cf4928af19f7ddf5f6837de32 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:46 -0700 Subject: iscsi-target: Fix missed wakeup race in TX thread The sleeping code in iscsi_target_tx_thread() is susceptible to the classic missed wakeup race: - TX thread finishes handle_immediate_queue() and handle_response_queue(), thinks both queues are empty. - Another thread adds a queue entry and does wake_up_process(), which does nothing because the TX thread is still awake. - TX thread does schedule_timeout() and sleeps forever. In practice this can kill an iSCSI connection if for example an initiator does single-threaded writes and the target misses the wakeup window when queueing an R2T; in this case the connection will be stuck until the initiator loses patience and does some task management operation (or kills the connection entirely). Fix this by converting to wait_event_interruptible(), which does not suffer from this sort of race. Signed-off-by: Roland Dreier Cc: Andy Grover Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index d6ce218..035c2c7 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3719,7 +3719,9 @@ restart: */ iscsit_thread_check_cpumask(conn, current, 1); - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); + wait_event_interruptible(conn->queues_wq, + !iscsit_conn_all_queues_empty(conn) || + ts->status == ISCSI_THREAD_SET_RESET); if ((ts->status == ISCSI_THREAD_SET_RESET) || signal_pending(current)) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 2ba9f9b..21048db 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -486,6 +486,7 @@ struct iscsi_tmr_req { }; struct iscsi_conn { + wait_queue_head_t queues_wq; /* Authentication Successful for this connection */ u8 auth_complete; /* State connection is currently in */ diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index cdc8a10..f8dbec0 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -41,6 +41,7 @@ static int iscsi_login_init_conn(struct iscsi_conn *conn) { + init_waitqueue_head(&conn->queues_wq); INIT_LIST_HEAD(&conn->conn_list); INIT_LIST_HEAD(&conn->conn_cmd_list); INIT_LIST_HEAD(&conn->immed_queue_list); diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index afd98cc..1a91195 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -488,7 +488,7 @@ void iscsit_add_cmd_to_immediate_queue( atomic_set(&conn->check_immediate_queue, 1); spin_unlock_bh(&conn->immed_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn) @@ -562,7 +562,7 @@ void iscsit_add_cmd_to_response_queue( atomic_inc(&cmd->response_queue_count); spin_unlock_bh(&conn->response_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn) @@ -616,6 +616,24 @@ static void iscsit_remove_cmd_from_response_queue( } } +bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn) +{ + bool empty; + + spin_lock_bh(&conn->immed_queue_lock); + empty = list_empty(&conn->immed_queue_list); + spin_unlock_bh(&conn->immed_queue_lock); + + if (!empty) + return empty; + + spin_lock_bh(&conn->response_queue_lock); + empty = list_empty(&conn->response_queue_list); + spin_unlock_bh(&conn->response_queue_lock); + + return empty; +} + void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) { struct iscsi_queue_req *qr, *qr_tmp; diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 44054bd3..894d0f8 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -25,6 +25,7 @@ extern struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_ extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8); extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *); extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *); +extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); extern void iscsit_free_cmd(struct iscsi_cmd *); -- cgit v0.10.2 From ab74b3d62f05192bf8fb8f169e7999d1183b2e08 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Wed, 31 Oct 2012 10:24:02 -0700 Subject: target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock around se_cmd->t_state_lock while spin_lock_irqsave is held via se_sess->sess_cmd_lock. Signed-off-by: Steve Hodgson Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 1c59a3c..be75c43 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -140,15 +140,15 @@ void core_tmr_abort_task( printk("ABORT_TASK: Found referenced %s task_tag: %u\n", se_cmd->se_tfo->get_fabric_name(), ref_tag); - spin_lock_irq(&se_cmd->t_state_lock); + spin_lock(&se_cmd->t_state_lock); if (se_cmd->transport_state & CMD_T_COMPLETE) { printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag); - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); goto out; } se_cmd->transport_state |= CMD_T_ABORTED; - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); list_del_init(&se_cmd->se_cmd_list); kref_get(&se_cmd->cmd_kref); -- cgit v0.10.2 From 9fd3c748aac9418cd377249ca463050783d2198f Mon Sep 17 00:00:00 2001 From: "Philip, Avinash" Date: Wed, 31 Oct 2012 16:21:09 +0530 Subject: ARM: dts: AM33XX: Add SPI node Add McSPI data node to AM33XX device tree file. The McSPI module (and so as the driver) is reused from OMAP4. Signed-off-by: Philip, Avinash Tested-by: Matt Porter [b-cousson@ti.com: Remove interrupt-parent] Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 97a7bd3..5dfd682 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -299,5 +299,27 @@ 76>; ti,hwmods = "rtc"; }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; }; }; -- cgit v0.10.2 From 83325d072185899b706de2956170b246585aaec9 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:29:49 +0200 Subject: DRM/Radeon: Fix Load Detection on legacy primary DAC. An uninitialized variable led to broken load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 0063df9..f278f20 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -671,6 +671,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN; WREG32(RADEON_DAC_CNTL, tmp); + tmp = dac_macro_cntl; tmp &= ~(RADEON_DAC_PDWN_R | RADEON_DAC_PDWN_G | RADEON_DAC_PDWN_B); -- cgit v0.10.2 From 9c50b1d937cc9656100ba10d9f57484c6d173936 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:31:19 +0200 Subject: DRM/Radeon: Fix primary DAC Load Detection for RV100 chips. For Radeon 7500 ATI recommends a DAC_FORCE value of 0x1ac. This value works better on ES1000 (RV100) chips, too, as it doesn't produce any false positives on any cards I have tested. Therefore let's assume that this value is good for all RV100 and RV200 chipset generations. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index f278f20..5fdc67b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -662,6 +662,8 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc if (ASIC_IS_R300(rdev)) tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT); + else if (ASIC_IS_RV100(rdev)) + tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT); else tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT); -- cgit v0.10.2 From fc87f13b8dc73706ae06caf229a336965e9b44a6 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:32:52 +0200 Subject: DRM/Radeon: On DVI-I use Load Detection when EDID is bogus. The Radeon driver uses the analog/digital flag to determine if the DAC or the TMDS encoder should be enabled on a DVI-I connector. If the EDID is bogus this flag is no longer reliable. This fix adds a fallback to DAC load detection to determine if anything is connected to the DAC. If not and a (bogus) EDID is found it assumes a digital display is connected. This works around problems with some crappy IPMI devices using Radeon ES1000. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 67cfc17..b884c36 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -941,7 +941,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) struct drm_mode_object *obj; int i; enum drm_connector_status ret = connector_status_disconnected; - bool dret = false; + bool dret = false, broken_edid = false; if (!force && radeon_check_hpd_status_unchanged(connector)) return connector->status; @@ -965,6 +965,9 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) ret = connector_status_disconnected; DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector)); radeon_connector->ddc_bus = NULL; + } else { + ret = connector_status_connected; + broken_edid = true; /* defer use_digital to later */ } } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -1047,13 +1050,24 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) encoder_funcs = encoder->helper_private; if (encoder_funcs->detect) { - if (ret != connector_status_connected) { - ret = encoder_funcs->detect(encoder, connector); - if (ret == connector_status_connected) { - radeon_connector->use_digital = false; + if (!broken_edid) { + if (ret != connector_status_connected) { + /* deal with analog monitors without DDC */ + ret = encoder_funcs->detect(encoder, connector); + if (ret == connector_status_connected) { + radeon_connector->use_digital = false; + } + if (ret != connector_status_disconnected) + radeon_connector->detected_by_load = true; } - if (ret != connector_status_disconnected) - radeon_connector->detected_by_load = true; + } else { + enum drm_connector_status lret; + /* assume digital unless load detected otherwise */ + radeon_connector->use_digital = true; + lret = encoder_funcs->detect(encoder, connector); + DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret); + if (lret == connector_status_connected) + radeon_connector->use_digital = false; } break; } -- cgit v0.10.2 From 74e4ca32a406a15efb24a6a6ecf84b4cdabfd4e7 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Wed, 24 Oct 2012 16:42:26 +0200 Subject: drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // Signed-off-by: Peter Senna Tschudin Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 30271b64..95e6318 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -264,7 +264,7 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p, /* macro tile width & height */ palign = (8 * surf->bankw * track->npipes) * surf->mtilea; halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea; - mtileb = (palign / 8) * (halign / 8) * tileb;; + mtileb = (palign / 8) * (halign / 8) * tileb; mtile_pr = surf->nbx / palign; mtile_ps = (mtile_pr * surf->nby) / halign; surf->layer_size = mtile_ps * mtileb * slice_pt; -- cgit v0.10.2 From dfdcbebc548ff14fd1a7029c95d060e0dd466469 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Thu, 25 Oct 2012 17:09:00 +0400 Subject: drm/radeon: fix ATPX function documentation Fix a copy&pasted documentation. Signed-off-by: Igor Murzov Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 37f6a90..15f5ded 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -352,9 +352,9 @@ static int radeon_atpx_switchto(enum vga_switcheroo_client_id id) } /** - * radeon_atpx_switchto - switch to the requested GPU + * radeon_atpx_power_state - power down/up the requested GPU * - * @id: GPU to switch to + * @id: GPU to power down/up * @state: requested power state (0 = off, 1 = on) * * Execute the necessary ATPX function to power down/up the discrete GPU -- cgit v0.10.2 From d038db86984977646815fff54c1be11bff6b9f5b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:26 +0100 Subject: DRM/Radeon: Clean up code in TV DAC load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 5fdc67b..85a7307 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1425,7 +1425,8 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; - uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp; + uint32_t gpiopad_a = 0, pixclks_cntl, tmp; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1464,9 +1465,12 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0; - disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0; - disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); @@ -1476,16 +1480,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - if (ASIC_IS_R300(rdev)) - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; tmp |= RADEON_CRTC2_CRT2_ON | (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); @@ -1541,6 +1542,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder } else { WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); } + WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); return found; -- cgit v0.10.2 From 701337dc2711096e5288430599dcf07aac5876ab Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:27 +0100 Subject: DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips. The RN50 has a TV DAC but only a single CRTC. For load detection this DAC is controlled by the primary CRTC. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 85a7307..3afed70 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1424,9 +1424,9 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder { struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; + uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl; uint32_t gpiopad_a = 0, pixclks_cntl, tmp; - uint32_t disp_output_cntl = 0, disp_hw_debug = 0; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1465,13 +1465,18 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - if (ASIC_IS_R300(rdev)) { - gpiopad_a = RREG32(RADEON_GPIOPAD_A); - disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + + if (rdev->flags & RADEON_SINGLE_CRTC) { + crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); } else { - disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); } - crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); dac_cntl2 = RREG32(RADEON_DAC_CNTL2); @@ -1480,19 +1485,24 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; - tmp |= RADEON_CRTC2_CRT2_ON | - (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); - - if (ASIC_IS_R300(rdev)) { - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; - tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; - WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + if (rdev->flags & RADEON_SINGLE_CRTC) { + tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON; + WREG32(RADEON_CRTC_EXT_CNTL, tmp); } else { - tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; - WREG32(RADEON_DISP_HW_DEBUG, tmp); + tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; + tmp |= RADEON_CRTC2_CRT2_ON | + (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); + WREG32(RADEON_CRTC2_GEN_CNTL, tmp); + + if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); + tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; + tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; + WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + } else { + tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; + WREG32(RADEON_DISP_HW_DEBUG, tmp); + } } tmp = RADEON_TV_DAC_NBLANK | @@ -1534,13 +1544,17 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder WREG32(RADEON_DAC_CNTL2, dac_cntl2); WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); - WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); - if (ASIC_IS_R300(rdev)) { - WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); - WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + if (rdev->flags & RADEON_SINGLE_CRTC) { + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); } else { - WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + if (ASIC_IS_R300(rdev)) { + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + } else { + WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + } } WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); -- cgit v0.10.2 From f8c4d701ae3477f41fdc95592caa476617988a53 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Mon, 29 Oct 2012 13:46:48 +0100 Subject: DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms(). On all dual CRTC GPUs the CRTC_CRT_ON in the RADEON_CRTC_EXT_CNTL register controls the CRTC of the primary DAC. Therefore it is set in the DAC DMPS function. This is different for GPU's with a single CRTC but a primary and a TV DAC: here it controls the single CRTC no matter where it is routed. Therefore we set it here. This avoids an elaborate on/off state tracking since both primary_dac_dpms() and tv_dac_dpms() functions would have to touch this bit. On single CRTC GPUs with just one DAC it's irrelevant where this bit is handled. agd5f: fix warning Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 5677a42..6857cb4 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -295,6 +295,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; + uint32_t crtc_ext_cntl = 0; uint32_t mask; if (radeon_crtc->crtc_id) @@ -307,6 +308,16 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) RADEON_CRTC_VSYNC_DIS | RADEON_CRTC_HSYNC_DIS); + /* + * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC. + * Therefore it is set in the DAC DMPS function. + * This is different for GPU's with a single CRTC but a primary and a + * TV DAC: here it controls the single CRTC no matter where it is + * routed. Therefore we set it here. + */ + if (rdev->flags & RADEON_SINGLE_CRTC) + crtc_ext_cntl = RADEON_CRTC_CRT_ON; + switch (mode) { case DRM_MODE_DPMS_ON: radeon_crtc->enabled = true; @@ -317,7 +328,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl)); } drm_vblank_post_modeset(dev, radeon_crtc->crtc_id); radeon_crtc_load_lut(crtc); @@ -331,7 +342,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl)); } radeon_crtc->enabled = false; /* adjust pm to dpms changes AFTER disabling crtcs */ diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3afed70..817392f 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -537,7 +537,9 @@ static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode break; } - WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); + /* handled in radeon_crtc_dpms() */ + if (!(rdev->flags & RADEON_SINGLE_CRTC)) + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); WREG32(RADEON_DAC_CNTL, dac_cntl); WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl); @@ -1095,7 +1097,8 @@ static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode) } else { if (is_tv) WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl); - else + /* handled in radeon_crtc_dpms() */ + else if (!(rdev->flags & RADEON_SINGLE_CRTC)) WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); } -- cgit v0.10.2 From 6d9cdfc27115b5d4a32906b25a6b2f89920b0366 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Oct 2012 11:51:03 -0400 Subject: drm/radeon: add load detection support for ext DAC on R200 (v2) The R200 asics use an external DAC for the secondary DAC. The current KMS code tries to use code for the integrated TV DAC for R200 which leads to unpredictable results since R200 does not have an integrated TV DAC. This patch ports the external DAC load detection support from the UMS driver to KMS. v2: fix typo in loop break logic Signed-off-by: Alex Deucher Reviewed-by: Egbert Eich diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 817392f..f5ba224 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1422,6 +1422,96 @@ static bool radeon_legacy_tv_detect(struct drm_encoder *encoder, return found; } +static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl; + uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c; + uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f; + uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp; + uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid; + bool found = false; + int i; + + /* save the regs we need */ + gpio_monid = RREG32(RADEON_GPIO_MONID); + fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); + disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A); + disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B); + disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C); + disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D); + disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E); + disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F); + crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP); + crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP); + crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID); + crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID); + + tmp = RREG32(RADEON_GPIO_MONID); + tmp &= ~RADEON_GPIO_A_0; + WREG32(RADEON_GPIO_MONID, tmp); + + WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON | + RADEON_FP2_PANEL_FORMAT | + R200_FP2_SOURCE_SEL_TRANS_UNIT | + RADEON_FP2_DVO_EN | + R200_FP2_DVO_RATE_SEL_SDR)); + + WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX | + RADEON_DISP_TRANS_MATRIX_GRAPHICS)); + + WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN | + RADEON_CRTC2_DISP_REQ_EN_B)); + + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0); + + WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080); + + for (i = 0; i < 200; i++) { + tmp = RREG32(RADEON_GPIO_MONID); + if (tmp & RADEON_GPIO_Y_0) + found = true; + + if (found) + break; + + if (!drm_can_sleep()) + mdelay(1); + else + msleep(1); + } + + /* restore the regs we used */ + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f); + WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl); + WREG32(RADEON_GPIO_MONID, gpio_monid); + + return found; +} + static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { @@ -1466,6 +1556,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder return connector_status_disconnected; } + /* R200 uses an external DAC for secondary DAC */ + if (rdev->family == CHIP_R200) { + if (radeon_legacy_ext_dac_detect(encoder, connector)) + found = connector_status_connected; + return found; + } + /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); -- cgit v0.10.2 From 50f8d35de8ba4af311ea1176c534e8b73bb198e5 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 31 Oct 2012 22:30:54 +0000 Subject: ixgbe: PTP get_ts_info missing software support This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller CC: Stable [3.5] Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 56b20d1..116f0e9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2673,6 +2673,9 @@ static int ixgbe_get_ts_info(struct net_device *dev, case ixgbe_mac_X540: case ixgbe_mac_82599EB: info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_HARDWARE | SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; -- cgit v0.10.2 From b457bcb97212c38154d941d88c13f5f63f3620d0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:52 +0000 Subject: bnx2x: Fix 57810 1G-KR link against certain switches. Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index e2e45ee..290e12a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3545,12 +3545,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i; + u16 val16 = 0, lane, i, cl72_ctrl; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, @@ -3565,6 +3564,13 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); + cl72_ctrl &= 0xf8ff; + cl72_ctrl |= 0x3800; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); + /* Check adding advertisement for 1G KX */ if (((vars->line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || -- cgit v0.10.2 From a75bb0010026f39910cd01d33a5baa47191539a0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:53 +0000 Subject: bnx2x: Fix link down in 57712 following LFA In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 290e12a..f2436ea 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3295,6 +3295,21 @@ static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) DEFAULT_PHY_DEV_ADDR); } +static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + /* Set correct devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, + phy->def_md_devad); + break; + } +} + static void bnx2x_xgxs_deassert(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -3309,10 +3324,8 @@ static void bnx2x_xgxs_deassert(struct link_params *params) REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); udelay(500); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - params->phy[INT_PHY].def_md_devad); + bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params, + PHY_INIT); } static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, @@ -10999,7 +11012,7 @@ static struct bnx2x_phy phy_xgxs = { .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL + .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func }; static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, -- cgit v0.10.2 From cd1a26a3bbc797100c55594bac0546204ccb1107 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:54 +0000 Subject: bnx2x: Restore global registers back to default. Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index f2436ea..5e8f7b7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3558,13 +3558,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i, cl72_ctrl; + u16 lane, i, cl72_ctrl, an_adv = 0; + u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, @@ -3589,7 +3587,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || (vars->line_speed == SPEED_1000)) { u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; - val16 |= (1<<5); + an_adv |= (1<<5); /* Enable CL37 1G Parallel Detect */ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1); @@ -3599,11 +3597,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || (vars->line_speed == SPEED_10000)) { /* Check adding advertisement for 10G KR */ - val16 |= (1<<7); + an_adv |= (1<<7); /* Enable 10G Parallel Detect */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 1); - + bnx2x_set_aer_mmd(params, phy); DP(NETIF_MSG_LINK, "Advertize 10G\n"); } @@ -3623,7 +3624,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertised speeds */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv); /* Advertised and set FEC (Forward Error Correction) */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, @@ -3647,9 +3648,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 */ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &val16); - if (val16 < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around\n"); + MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); + if (ucode_ver < 0xd108) { + DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", + ucode_ver); vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; } bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, @@ -3670,21 +3672,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u16 i; + u16 val16, i, lane; static struct bnx2x_reg_set reg_set[] = { /* Disable Autoneg */ {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0x3f00}, {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0}, {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, - /* Disable CL36 PCS Tx */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0}, - /* Double Wide Single Data Rate @ pll rate */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF}, /* Leave cl72 training enable, needed for KR */ {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, @@ -3695,11 +3692,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); - /* Leave CL72 enabled */ - bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - 0x3800); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Global registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 &= ~(0x0011 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 |= (0x0303 << (lane << 1)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); /* Set speed via PMA/PMD register */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); @@ -4322,7 +4332,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u16 val16; + u16 val16, lane; bnx2x_sfp_e3_set_transmitter(params, phy, 0); bnx2x_set_mdio_clk(bp, params->chip_id, params->port); bnx2x_set_aer_mmd(params, phy); @@ -4359,6 +4369,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16 & 0xff00); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 |= (0x11 << lane); + if (phy->flags & FLAGS_WC_DUAL_MODE) + val16 |= (0x22 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 &= ~(0x0303 << (lane << 1)); + val16 |= (0x0101 << (lane << 1)); + if (phy->flags & FLAGS_WC_DUAL_MODE) { + val16 &= ~(0x0c0c << (lane << 1)); + val16 |= (0x0404 << (lane << 1)); + } + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); + } static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, -- cgit v0.10.2 From 4978140c38958b15b3b95a49bda688723fa014eb Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:55 +0000 Subject: bnx2x: Fix potential incorrect link speed provision Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 5e8f7b7..308ba42 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -137,7 +137,16 @@ #define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD #define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD - +#define LINK_UPDATE_MASK \ + (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \ + LINK_STATUS_LINK_UP | \ + LINK_STATUS_PHYSICAL_LINK_FLAG | \ + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \ + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \ + LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \ + LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) #define SFP_EEPROM_CON_TYPE_ADDR 0x2 #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 @@ -6349,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params, vars->mac_type = MAC_TYPE_NONE; /* Update shared memory */ - vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | - LINK_STATUS_LINK_UP | - LINK_STATUS_PHYSICAL_LINK_FLAG | - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | - LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | - LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | - LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE); + vars->link_status &= ~LINK_UPDATE_MASK; vars->line_speed = 0; bnx2x_update_mng(params, vars->link_status); @@ -6505,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; u8 active_external_phy = INT_PHY; vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_UPDATE_MASK; for (phy_index = INT_PHY; phy_index < params->num_phys; phy_index++) { phy_vars[phy_index].flow_ctrl = 0; -- cgit v0.10.2 From e82041df5d0a85457880fbbe00da057443b3fcc0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:56 +0000 Subject: bnx2x: Fix unrecognized SFP+ module after driver is loaded When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 308ba42..679d45e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -7634,7 +7634,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params, static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, - u8 *o_buf) + u8 *o_buf, u8 is_init) { int rc = 0; u8 i, j = 0, cnt = 0; @@ -7651,10 +7651,10 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { - if (cnt == I2C_WA_PWR_ITER) { + if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) { bnx2x_warpcore_power_module(params, phy, 0); /* Note that 100us are not enough here */ - usleep_range(1000,1000); + usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, phy, 1); } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, @@ -7774,7 +7774,7 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); + byte_cnt, o_buf, 0); break; } return rc; @@ -7978,6 +7978,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, { u8 val; + int rc; struct bnx2x *bp = params->bp; u16 timeout; /* Initialization time after hot-plug may take up to 300ms for @@ -7985,8 +7986,14 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, */ for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) - == 0) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, + params, 1, + 1, &val, 1); + else + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, + &val); + if (rc == 0) { DP(NETIF_MSG_LINK, "SFP+ module initialization took %d ms\n", timeout * 5); @@ -7994,7 +8001,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, } usleep_range(5000, 10000); } - return -EINVAL; + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val); + return rc; } static void bnx2x_8727_power_module(struct bnx2x *bp, -- cgit v0.10.2 From 03c31488a084b344cd04bb853db97706143327b9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:57 +0000 Subject: bnx2x: Fix no link on 577xx 10G-baseT Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 679d45e..6dd0dd0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -11528,6 +11528,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_BASE_T; break; case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); phy->media_type = ETH_PHY_XFP_FIBER; break; case PORT_HW_CFG_NET_SERDES_IF_SFI: -- cgit v0.10.2 From 477864ddd36510e9802c2adb6d9445c2d7783fe5 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 31 Oct 2012 05:46:58 +0000 Subject: bnx2x: Disable FCoE for 57840 since not yet supported by FW Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d5648fc..f23e8c0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11902,7 +11902,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, /* disable FCOE L2 queue for E1x */ if (CHIP_IS_E1x(bp)) bp->flags |= NO_FCOE_FLAG; - + /* disable FCOE for 57840 device, until FW supports it */ + switch (ent->driver_data) { + case BCM57840_O: + case BCM57840_4_10: + case BCM57840_2_20: + case BCM57840_MFO: + case BCM57840_MF: + bp->flags |= NO_FCOE_FLAG; + } #endif -- cgit v0.10.2 From d24bab93e42b1f90d89c86b3edbb81ec34bb9474 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Thu, 1 Nov 2012 11:21:53 -0400 Subject: SUNRPC: return proper errno from backchannel_rqst The one and only caller (in fs/nfs/nfs4client.c) uses the result as an errno and would have interpreted an error as EPERM. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c index 5a3d675..a9c0bbc 100644 --- a/net/sunrpc/backchannel_rqst.c +++ b/net/sunrpc/backchannel_rqst.c @@ -172,7 +172,7 @@ out_free: xprt_free_allocation(req); dprintk("RPC: setup backchannel transport failed\n"); - return -1; + return -ENOMEM; } EXPORT_SYMBOL_GPL(xprt_setup_backchannel); -- cgit v0.10.2 From eb6e98a1b25fb0f347fece9814257a9e1cb537c8 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 04:42:51 +0000 Subject: bonding: fix off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary; Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index dc15d24..238d9b3 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1060,7 +1060,7 @@ static ssize_t bonding_store_primary(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing primary */ if (!strlen(ifname) || buf[0] == '\n') { -- cgit v0.10.2 From c84e1590d149cfc885062e938944941f33e69f38 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 06:03:52 +0000 Subject: bonding: fix second off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave; Signed-off-by: Nikolay Aleksandrov Note: Sorry for the second patch but I missed this one while checking the file. You can squash them into one patch. Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 238d9b3..ef8d2a0 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1237,7 +1237,7 @@ static ssize_t bonding_store_active_slave(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing active */ if (!strlen(ifname) || buf[0] == '\n') { -- cgit v0.10.2 From d3e9a1dc7c34c3c5a253091289a54883bf27f6ba Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 31 Oct 2012 05:48:19 +0000 Subject: net: sctp: Fix typo in net/sctp Correct spelling typo in net/sctp/socket.c Signed-off-by: Masanari Iida Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 59d16ea..a60d1f8 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -974,7 +974,7 @@ SCTP_STATIC int sctp_setsockopt_bindx(struct sock* sk, void *addr_buf; struct sctp_af *af; - SCTP_DEBUG_PRINTK("sctp_setsocktopt_bindx: sk %p addrs %p" + SCTP_DEBUG_PRINTK("sctp_setsockopt_bindx: sk %p addrs %p" " addrs_size %d opt %d\n", sk, addrs, addrs_size, op); if (unlikely(addrs_size <= 0)) -- cgit v0.10.2 From 8f363b77ee4fbf7c3bbcf5ec2c5ca482d396d664 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Wed, 31 Oct 2012 02:45:32 +0000 Subject: net: fix divide by zero in tcp algorithm illinois Reading TCP stats when using TCP Illinois congestion control algorithm can cause a divide by zero kernel oops. The division by zero occur in tcp_illinois_info() at: do_div(t, ca->cnt_rtt); where ca->cnt_rtt can become zero (when rtt_reset is called) Steps to Reproduce: 1. Register tcp_illinois: # sysctl -w net.ipv4.tcp_congestion_control=illinois 2. Monitor internal TCP information via command "ss -i" # watch -d ss -i 3. Establish new TCP conn to machine Either it fails at the initial conn, or else it needs to wait for a loss or a reset. This is only related to reading stats. The function avg_delay() also performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its calling point in update_params(). Thus, simply fix tcp_illinois_info(). Function tcp_illinois_info() / get_info() is called without socket lock. Thus, eliminate any race condition on ca->cnt_rtt by using a local stack variable. Simply reuse info.tcpv_rttcnt, as its already set to ca->cnt_rtt. Function avg_delay() is not affected by this race condition, as its called with the socket lock. Cc: Petr Matousek Signed-off-by: Jesper Dangaard Brouer Acked-by: Eric Dumazet Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c index 813b43a..834857f 100644 --- a/net/ipv4/tcp_illinois.c +++ b/net/ipv4/tcp_illinois.c @@ -313,11 +313,13 @@ static void tcp_illinois_info(struct sock *sk, u32 ext, .tcpv_rttcnt = ca->cnt_rtt, .tcpv_minrtt = ca->base_rtt, }; - u64 t = ca->sum_rtt; - do_div(t, ca->cnt_rtt); - info.tcpv_rtt = t; + if (info.tcpv_rttcnt > 0) { + u64 t = ca->sum_rtt; + do_div(t, info.tcpv_rttcnt); + info.tcpv_rtt = t; + } nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); } } -- cgit v0.10.2 From 2c42a3fb30845867bfcaf0747ff50c1375884ff2 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Tue, 30 Oct 2012 12:03:09 +0000 Subject: tcp: Fix double sizeof in new tcp_metrics code Fix double sizeof when parsing IPv6 address from user space because it breaks get/del by specific IPv6 address. Problem noticed by David Binderman: https://bugzilla.kernel.org/show_bug.cgi?id=49171 Signed-off-by: Julian Anastasov Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c index 4c752a6..53bc584 100644 --- a/net/ipv4/tcp_metrics.c +++ b/net/ipv4/tcp_metrics.c @@ -864,7 +864,7 @@ static int parse_nl_addr(struct genl_info *info, struct inetpeer_addr *addr, } a = info->attrs[TCP_METRICS_ATTR_ADDR_IPV6]; if (a) { - if (nla_len(a) != sizeof(sizeof(struct in6_addr))) + if (nla_len(a) != sizeof(struct in6_addr)) return -EINVAL; addr->family = AF_INET6; memcpy(addr->addr.a6, nla_data(a), sizeof(addr->addr.a6)); -- cgit v0.10.2 From f9b1ef5f06d65a01952169b67d474f7f0dcb0206 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 16:48:40 -0400 Subject: NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctly Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8cfbac1..091baab 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5677,7 +5677,7 @@ static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl, tbl->slots = new; tbl->max_slots = max_slots; } - tbl->highest_used_slotid = -1; /* no slot is currently used */ + tbl->highest_used_slotid = NFS4_NO_SLOT; for (i = 0; i < tbl->max_slots; i++) tbl->slots[i].seq_nr = ivalue; spin_unlock(&tbl->slot_tbl_lock); -- cgit v0.10.2 From d03a93bbec5edfe33f09d629d27c1afd50f043aa Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 1 Nov 2012 08:57:08 -0500 Subject: ARM: dts: OMAP4: Update timer addresses For OMAP4 devices, timers 5-8 have both a L3 bus address and a Cortex-A9 private bus address. Currently the device-tree source only contains the L3 bus address for these timers. Update these timers to include the Cortex-A9 private address and make the default address the Cortex-A9 private bus address to match the current HWMOD implementation. Signed-off-by: Jon Hunter Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 23ee149..739bb79 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -469,33 +469,37 @@ ti,hwmods = "timer4"; }; - timer5: timer@49038000 { + timer5: timer@40138000 { compatible = "ti,omap2-timer"; - reg = <0x49038000 0x80>; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; }; - timer6: timer@4903a000 { + timer6: timer@4013a000 { compatible = "ti,omap2-timer"; - reg = <0x4903a000 0x80>; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; interrupts = <0 42 0x4>; ti,hwmods = "timer6"; ti,timer-dsp; }; - timer7: timer@4903c000 { + timer7: timer@4013c000 { compatible = "ti,omap2-timer"; - reg = <0x4903c000 0x80>; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; interrupts = <0 43 0x4>; ti,hwmods = "timer7"; ti,timer-dsp; }; - timer8: timer@4903e000 { + timer8: timer@4013e000 { compatible = "ti,omap2-timer"; - reg = <0x4903e000 0x80>; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; interrupts = <0 44 0x4>; ti,hwmods = "timer8"; ti,timer-pwm; -- cgit v0.10.2 From df692a925185b08ab5e792d163ee997bd773cdb9 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 1 Nov 2012 09:09:51 -0500 Subject: ARM: dts: OMAP5: Add timer nodes Add the 11 timer nodes for OMAP5 devices. Signed-off-by: Jon Hunter Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 930dbfe..c8954f1 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -379,5 +379,94 @@ ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; -- cgit v0.10.2 From 3b3132f7e80e3d786f8ad5d5b97d4b6122be9aaa Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 1 Nov 2012 09:12:23 -0500 Subject: ARM: dts: OMAP5: Add counter node Add the 32kHz counter node for OMAP5 devices. Signed-off-by: Jon Hunter Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index c8954f1..ead74c8 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; -- cgit v0.10.2 From eaa7cc60f7dff5e74ef387ace8228235fab8241b Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 1 Nov 2012 23:55:43 +0000 Subject: hwmon: Only include of_match_table with CONFIG_OF_GPIO The following fixes build errors on sparc. Without any DT support, of_match_ptr is NULL and the below is a no-op. However, if just CONFIG_OF is defined then so is of_match_ptr. All useful parts of the gpio-fan DT support rely on CONFIG_OF_GPIO anyway, so of_match_table should too. Signed-off-by: Jamie Lentin Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 36509ae..1381a2e 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -630,7 +630,9 @@ static struct platform_driver gpio_fan_driver = { .driver = { .name = "gpio-fan", .pm = GPIO_FAN_PM, +#ifdef CONFIG_OF_GPIO .of_match_table = of_match_ptr(of_gpio_fan_match), +#endif }, }; -- cgit v0.10.2 From 3916e1d71b62b120888aa50bcc8d9a6200fc19a7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 1 Nov 2012 13:47:09 +1000 Subject: drm/udl: fix stride issues scanning out stride != width*bpp When buffer sharing with the i915 and using a 1680x1050 monitor, the i915 gives is a 6912 buffer for the 6720 width, the code doesn't render this properly as it uses one value to set the base address for reading from the vmap and for where to start on the device. This fixes it by calculating the values correctly for the device and for the pixmap. No idea how I haven't seen this before now. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h index fccd361..87aa5f5 100644 --- a/drivers/gpu/drm/udl/udl_drv.h +++ b/drivers/gpu/drm/udl/udl_drv.h @@ -104,7 +104,7 @@ udl_fb_user_fb_create(struct drm_device *dev, int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, u32 byte_width, int *ident_ptr, int *sent_ptr); int udl_dumb_create(struct drm_file *file_priv, diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index 69a2b16..d4ab3be 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -114,9 +114,10 @@ static void udlfb_dpy_deferred_io(struct fb_info *info, list_for_each_entry(cur, &fbdefio->pagelist, lru) { if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8), - &urb, (char *) info->fix.smem_start, - &cmd, cur->index << PAGE_SHIFT, - PAGE_SIZE, &bytes_identical, &bytes_sent)) + &urb, (char *) info->fix.smem_start, + &cmd, cur->index << PAGE_SHIFT, + cur->index << PAGE_SHIFT, + PAGE_SIZE, &bytes_identical, &bytes_sent)) goto error; bytes_rendered += PAGE_SIZE; } @@ -187,10 +188,11 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, for (i = y; i < y + height ; i++) { const int line_offset = fb->base.pitches[0] * i; const int byte_offset = line_offset + (x * bpp); - + const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp); if (udl_render_hline(dev, bpp, &urb, (char *) fb->obj->vmapping, - &cmd, byte_offset, width * bpp, + &cmd, byte_offset, dev_byte_offset, + width * bpp, &bytes_identical, &bytes_sent)) goto error; } diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c index dc09552..142fee5 100644 --- a/drivers/gpu/drm/udl/udl_transfer.c +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -213,11 +213,12 @@ static void udl_compress_hline16( */ int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, + u32 byte_width, int *ident_ptr, int *sent_ptr) { const u8 *line_start, *line_end, *next_pixel; - u32 base16 = 0 + (byte_offset / bpp) * 2; + u32 base16 = 0 + (device_byte_offset / bpp) * 2; struct urb *urb = *urb_ptr; u8 *cmd = *urb_buf_ptr; u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length; -- cgit v0.10.2 From 82fa63bd6b87969dfde0139dbede243380b087d6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Oct 2012 11:55:16 +0100 Subject: i2c: mxs: remove broken PIOQUEUE support This I2C master can do DMA and PIOQUEUE (PIO with FIFO). Originally, only PIOQUEUE was supported and it had issues, then DMA support was added this cycle. The original intention was to keep PIOQUEUE since it has less overhead what is nice for small transfers. However, runtime switching between PIOQEUE and DMA depending on the transfer size never worked despite a lot of trying. Since PIOQUEUE mode itself was flaky (polling at places where interrupts failed to work) and the implementation also imposed a size limit for transfers, it is best to remove the support, so users don't fall over its limitations. It also makes the driver a lot cleaner and more robust. If somebody really wants less overhead, plain PIO mode could still be implemented with the addidtional advantage that this mode is also available on MX23, too. Signed-off-by: Wolfram Sang Reviewed-by: Marek Vasut diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1f58197..286ca19 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -1,7 +1,7 @@ /* * Freescale MXS I2C bus driver * - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K. * * based on a (non-working) driver which was: * @@ -35,10 +35,6 @@ #define DRIVER_NAME "mxs-i2c" -static bool use_pioqueue; -module_param(use_pioqueue, bool, 0); -MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); - #define MXS_I2C_CTRL0 (0x00) #define MXS_I2C_CTRL0_SET (0x04) @@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ MXS_I2C_CTRL1_SLAVE_IRQ) -#define MXS_I2C_QUEUECTRL (0x60) -#define MXS_I2C_QUEUECTRL_SET (0x64) -#define MXS_I2C_QUEUECTRL_CLR (0x68) - -#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 -#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 - -#define MXS_I2C_QUEUESTAT (0x70) -#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 -#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F - -#define MXS_I2C_QUEUECMD (0x80) - -#define MXS_I2C_QUEUEDATA (0x90) - -#define MXS_I2C_DATA (0xa0) - #define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ MXS_I2C_CTRL0_PRE_SEND_START | \ @@ -153,7 +132,6 @@ struct mxs_i2c_dev { const struct mxs_i2c_speed_config *speed; /* DMA support components */ - bool dma_mode; int dma_channel; struct dma_chan *dmach; struct mxs_dma_data dma_data; @@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - if (i2c->dma_mode) - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); - else - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); -} - -static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, - int flags) -{ - u32 data; - - writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); - - data = (addr << 1) | I2C_SMBUS_READ; - writel(data, i2c->regs + MXS_I2C_DATA); - - data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); -} - -static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, - u8 addr, u8 *buf, int len, int flags) -{ - u32 data; - int i, shifts_left; - - data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); - - /* - * We have to copy the slave address (u8) and buffer (arbitrary number - * of u8) into the data register (u32). To achieve that, the u8 are put - * into the MSBs of 'data' which is then shifted for the next u8. When - * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 - * looks like this: - * - * 3 2 1 0 - * 10987654|32109876|54321098|76543210 - * --------+--------+--------+-------- - * buffer+2|buffer+1|buffer+0|slave_addr - */ - - data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; - - for (i = 0; i < len; i++) { - data >>= 8; - data |= buf[i] << 24; - if ((i & 3) == 2) - writel(data, i2c->regs + MXS_I2C_DATA); - } - - /* Write out the remaining bytes if any */ - shifts_left = 24 - (i & 3) * 8; - if (shifts_left) - writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); -} - -/* - * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the - * rd_threshold to 1). Couldn't get this to work, though. - */ -static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - - while (readl(i2c->regs + MXS_I2C_QUEUESTAT) - & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { - if (time_after(jiffies, timeout)) - return -ETIMEDOUT; - cond_resched(); - } - - return 0; -} - -static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) -{ - u32 uninitialized_var(data); - int i; - - for (i = 0; i < len; i++) { - if ((i & 3) == 0) { - if (mxs_i2c_wait_for_data(i2c)) - return -ETIMEDOUT; - data = readl(i2c->regs + MXS_I2C_QUEUEDATA); - } - buf[i] = data & 0xff; - data >>= 8; - } - - return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - if (i2c->dma_mode) { - ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); - if (ret) - return ret; - } else { - if (msg->flags & I2C_M_RD) { - mxs_i2c_pioq_setup_read(i2c, msg->addr, - msg->len, flags); - } else { - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, - msg->len, flags); - } - - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_SET); - } + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return ret; ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { - ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); - if (ret) - goto timeout; - } - if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); - else - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); - if (i2c->dma_mode) - mxs_i2c_dma_finish(i2c); + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; - bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - if (!i2c->dma_mode) { - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); - } - writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); return IRQ_HANDLED; @@ -556,23 +409,14 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) int ret; /* - * The MXS I2C DMA mode is prefered and enabled by default. - * The PIO mode is still supported, but should be used only - * for debuging purposes etc. - */ - i2c->dma_mode = !use_pioqueue; - if (!i2c->dma_mode) - dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n"); - - /* * TODO: This is a temporary solution and should be changed * to use generic DMA binding later when the helpers get in. */ ret = of_property_read_u32(node, "fsl,i2c-dma-channel", &i2c->dma_channel); if (ret) { - dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n"); - i2c->dma_mode = 0; + dev_err(dev, "Failed to get DMA channel!\n"); + return -ENODEV; } ret = of_property_read_u32(node, "clock-frequency", &speed); @@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - if (i2c->dma_mode) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - i2c->dma_data.chan_irq = dmairq; - i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); - if (!i2c->dmach) { - dev_err(dev, "Failed to request dma\n"); - return -ENODEV; - } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; } platform_set_drvdata(pdev, i2c); -- cgit v0.10.2 From 817315f57408b1a9c78cbc7ff2bf186da45ddcc1 Mon Sep 17 00:00:00 2001 From: Philippe Begnic Date: Wed, 10 Oct 2012 13:02:26 +0200 Subject: i2c-nomadik: Fixup clock handling Make sure to clk_prepare as well as clk_enable. Signed-off-by: Philippe Begnic Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 698d7ac..02c3115 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, pm_runtime_get_sync(&dev->adev->dev); - clk_enable(dev->clk); + status = clk_prepare_enable(dev->clk); + if (status) { + dev_err(&dev->adev->dev, "can't prepare_enable clock\n"); + goto out_clk; + } status = init_hw(dev); if (status) @@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, } out: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); +out_clk: pm_runtime_put_sync(&dev->adev->dev); dev->busy = false; -- cgit v0.10.2 From 91b370a0dbda5de92c2cf4c3bc0d18d6bf08f05f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 1 Nov 2012 22:08:14 +0530 Subject: i2c: tegra: set irq name as device name When watching the irqs name of tegra i2c, all instances irq name shows as tegra_i2c. Passing the device name properly to have the irq names with instance like tegra-i2c.0, tegra-i2c.1 etc. Signed-off-by: Laxman Dewangan Acked-by: Jean Delvare Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index f981ac4..dcea77b 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, - tegra_i2c_isr, 0, pdev->name, i2c_dev); + tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); return ret; -- cgit v0.10.2 From a5788caa269e446201018bb8879a1dd90f41d32b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: FRV: Add missing linux/export.h #inclusions Add missing linux/export.h #inclusions to the FRV arch. Signed-off-by: David Howells diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index e47857f..b99c2a7 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From 5f0231d97b2d361292b090b81479a68123010376 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: FRV: Don't objcopy the GNU build_id note Don't let objcopy transfer the GNU build_id note into the loadable image as it is located at address 0 and the image ends up >3G in size. Signed-off-by: David Howells diff --git a/arch/frv/boot/Makefile b/arch/frv/boot/Makefile index 6ae3254..636d5bb 100644 --- a/arch/frv/boot/Makefile +++ b/arch/frv/boot/Makefile @@ -17,6 +17,8 @@ PARAMS_PHYS = 0x0207c000 INITRD_PHYS = 0x02180000 INITRD_VIRT = 0x02180000 +OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment + # # If you don't define ZRELADDR above, # then it defaults to ZTEXTADDR @@ -32,18 +34,18 @@ Image: $(obj)/Image targets: $(obj)/Image $(obj)/Image: vmlinux FORCE - $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@ #$(obj)/Image: $(CONFIGURE) $(SYSTEM) -# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@ +# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@ bzImage: zImage zImage: $(CONFIGURE) compressed/$(LINUX) - $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@ bootpImage: bootp/bootp - $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@ compressed/$(LINUX): $(LINUX) dep @$(MAKE) -C compressed $(LINUX) -- cgit v0.10.2 From eded09ccf58ab00474ccde547dd525c75dbc28fd Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: FRV: gcc-4.1.2 also inlines weak functions gcc-4.1.2 inlines weak functions, which causes FRV to fail when the dummy thread_info_cache_init() gets inlined into start_kernel(). Signed-off-by: David Howells diff --git a/init/main.c b/init/main.c index 9cf77ab..e33e09d 100644 --- a/init/main.c +++ b/init/main.c @@ -442,9 +442,11 @@ void __init __weak smp_setup_processor_id(void) { } +# if THREAD_SIZE >= PAGE_SIZE void __init __weak thread_info_cache_init(void) { } +#endif /* * Set up kernel memory allocators -- cgit v0.10.2 From 1ee6f5669a7eaba0e2f4e0dd0599b56eb8a9a090 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: FRV: Fix the preemption handling Fix the preemption handling in FRV code where the PREEMPT_ACTIVE value is incorrectly loaded into the threadinfo flags rather than the threadinfo preemption count. Unfortunately, the code cannot be simply converted to use preempt_schedule_irq() as is because FRV uses virtual interrupt disablement to cut down on the cost of actually disabling interrupts and thus local_irq_enable() doesn't actually enable interrupts. Reported-by: Al Viro Signed-off-by: David Howells cc: Al Viro diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index ee0beb3..d64c526 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1086,7 +1086,7 @@ __entry_preempt_need_resched: beq icc0,#1,__entry_return_direct setlos #PREEMPT_ACTIVE,gr5 - sti gr5,@(gr15,#TI_FLAGS) + sti gr5,@(gr15,#TI_PRE_COUNT) andi gr23,#~PSR_PIL,gr23 movgs gr23,psr -- cgit v0.10.2 From e7aa51b2e52274b13be3209e2787d1b2ce9624fd Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:43 +0000 Subject: FRV: Fix the new-style kernel_thread() stuff The kernel_thread() changes for FRV don't work, and FRV fails to boot, starting with: commit 02ce496f152df87be081a64796498942c433a2fd Author: Al Viro Date: Tue Sep 18 22:18:51 2012 -0400 Subject: frv: split ret_from_fork, simplify kernel_thread() a lot The problem is that the userspace registers are completely cleared when a kernel thread is created and all subsequent user threads are then copied from that. Unfortunately, however, the TBR and PSR registers are restored from the pt_regs and the values they should be set to are clobbered by the memset. Instead, copy across the old user registers as normal, and then merely alter GR8 and GR9 in it if we're going to execute a kernel thread. Signed-off-by: David Howells diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index e1e3aa1..7e33215 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags, childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE); + /* set up the userspace frame (the only place that the USP is stored) */ + *childregs = *__kernel_frame0_ptr; + p->set_child_tid = p->clear_child_tid = NULL; p->thread.frame = childregs; @@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags, p->thread.frame0 = childregs; if (unlikely(!regs)) { - memset(childregs, 0, sizeof(struct pt_regs)); childregs->gr9 = usp; /* function */ childregs->gr8 = arg; - childregs->psr = PSR_S; p->thread.pc = (unsigned long) ret_from_kernel_thread; save_user_regs(p->thread.user); return 0; -- cgit v0.10.2 From 7b7ade117951dcc5ec947595ea7ff622fa56895e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 15 Oct 2012 10:53:17 -0400 Subject: frv: switch to saner kernel_execve() semantics Signed-off-by: Al Viro diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index b741250..df2eb4b 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -13,6 +13,7 @@ config FRV select GENERIC_CPU_DEVICES select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE config ZONE_DMA bool diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 266a5b2..2358634 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -30,7 +30,6 @@ #define __ARCH_WANT_SYS_RT_SIGACTION #define __ARCH_WANT_SYS_RT_SIGSUSPEND #define __ARCH_WANT_SYS_EXECVE -#define __ARCH_WANT_KERNEL_EXECVE /* * "Conditional" syscalls diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index d64c526..b1cd7e8 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -869,11 +869,6 @@ ret_from_kernel_thread: call schedule_tail calll.p @(gr21,gr0) or gr20,gr20,gr8 - bra sys_exit - - .globl ret_from_kernel_execve -ret_from_kernel_execve: - ori gr28,0,sp bra __syscall_exit ################################################################################################### -- cgit v0.10.2 From 1d72d9f83df057e71c7951def41138a0230bf737 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 2 Nov 2012 12:05:44 -0400 Subject: frv: fix the broken preempt Just get %icc2 into the state we would have after local_irq_disable() and physical IRQ having happened since then. Then we can simply use preempt_schedule_irq() and be done with the whole mess. Acked-by: David Howells Signed-off-by: Al Viro diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index b1cd7e8..dfcd263 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1075,27 +1075,10 @@ __entry_return_from_kernel_interrupt: subicc gr5,#0,gr0,icc0 beq icc0,#0,__entry_return_direct -__entry_preempt_need_resched: - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0 - beq icc0,#1,__entry_return_direct - - setlos #PREEMPT_ACTIVE,gr5 - sti gr5,@(gr15,#TI_PRE_COUNT) - - andi gr23,#~PSR_PIL,gr23 - movgs gr23,psr - - call schedule - sti gr0,@(gr15,#TI_PRE_COUNT) - - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - bra __entry_preempt_need_resched -#else - bra __entry_return_direct + subcc gr0,gr0,gr0,icc2 /* set Z and clear C */ + call preempt_schedule_irq #endif + bra __entry_return_direct ############################################################################### -- cgit v0.10.2 From ad24bde8f1025da014108493b595bed22d989efb Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 20 Jun 2012 15:55:24 -0500 Subject: ARM: OMAP3: Dynamically disable secure timer nodes for secure devices OMAP3 devices may or may not have security features enabled. Security enabled devices are known as high-secure (HS) and devices without security are known as general purpose (GP). For OMAP3 devices there are 12 general purpose timers available. On secure devices the 12th timer is reserved for secure usage and so cannot be used by the kernel, where as for a GP device it is available. We can detect the OMAP device type, secure or GP, at runtime via an on-chip register. Today, when not using DT, we do not register the 12th timer as a linux device if the device is secure. When using device tree, device tree is going to register all the timer devices it finds in the device tree blob. To prevent device tree from registering 12th timer on a secure OMAP3 device we can add a status property to the timer binding with the value "disabled" at boot time. Note that timer 12 on a OMAP3 device has a property "ti,timer-secure" to indicate that it will not be available on a secure device and so for secure OMAP3 devices, we search for timers with this property and then disable them. Using the prom_add_property() function to dynamically add a property was a recommended approach suggested by Rob Herring [1]. I have tested this on an OMAP3 GP device and faking it to pretend to be a secure device to ensure that any timers marked with "ti,timer-secure" are not registered on boot. I have also made sure that all timers are registered as expected on a GP device by default. [1] http://comments.gmane.org/gmane.linux.ports.arm.omap/79203 Signed-off-by: Jon Hunter diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 69e4663..def9a0e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -144,6 +144,41 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + for_each_matching_node(np, omap_timer_match) { + if (of_get_property(np, "ti,timer-secure", NULL)) + prom_add_property(np, &device_disabled); + } + } +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, const char *fck_source) @@ -437,6 +472,7 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src) \ static void __init omap##name##_timer_init(void) \ { \ + omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src); \ omap2_clocksource_init((clksrc_nr), clksrc_src); \ } -- cgit v0.10.2 From 373fe0bdf9911c4362942162a2b4d20e6f74da5b Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 6 Sep 2012 15:28:00 -0500 Subject: ARM: OMAP: Add function to request a timer by capability Currently OMAP timers can be requested by requesting any available or by a numerical device ID. If a specific timer is required because it has a particular capability, such as can interrupt the on-chip DSP in addition to the ARM CPU, then the user needs to know the device ID of the timer with this feature. Therefore, add a new API called omap_dm_timer_request_by_cap() that allows drivers to request a timer by capability. Signed-off-by: Jon Hunter diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 938b50a..2574b86 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -237,6 +237,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); +/** + * omap_dm_timer_request_by_cap - Request a timer by capability + * @cap: Bit mask of capabilities to match + * + * Find a timer based upon capabilities bit mask. Callers of this function + * should use the definitions found in the plat/dmtimer.h file under the + * comment "timer capabilities used in hwmod database". Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) +{ + struct omap_dm_timer *timer = NULL, *t; + unsigned long flags; + + if (!cap) + return NULL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(t, &omap_timer_list, node) { + if ((!t->reserved) && ((t->capability & cap) == cap)) { + /* + * If timer is not NULL, we have already found one timer + * but it was not an exact match because it had more + * capabilites that what was required. Therefore, + * unreserve the last timer found and see if this one + * is a better match. + */ + if (timer) + timer->reserved = 0; + + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + break; + } + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; + } + + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); + + return timer; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); + int omap_dm_timer_free(struct omap_dm_timer *timer) { if (unlikely(!timer)) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e9..348f855 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -99,6 +99,7 @@ struct dmtimer_platform_data { int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); -- cgit v0.10.2 From 7dd9d502b6cb9f82c9726ea601276b666a93e95d Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 12 Sep 2012 11:40:58 -0500 Subject: ARM: OMAP3: Add generic machine descriptor for boards with OMAP3 GP devices OMAP3 devices may or may not have security features enabled. Security enabled devices are known as high-secure (HS) and devices without security are known as general purpose (GP). Some OMAP3 boards, such as the OMAP3 beagle board, only use GP devices and for GP devices there is a 12th timer available on-chip that can operate at 32kHz. The clock for 12th timer is generated by an internal oscillator and is unique this timer. Boards such as the beagle board use this timer as a 32kHz based clock-events timer because early versions of the board had a hardware problem preventing them from using other on-chip timers clocked by a external 32kHz clock. When booting with device-tree all OMAP3 devices use timer 1 by default for the clock-events timer. Therefore, add a generic machine descriptor for boards with OMAP3 GP devices so that they can use the 12th timer as the clock-events timer instead of the default. Signed-off-by: Jon Hunter diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdf..d690180 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -97,6 +97,23 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .dt_compat = omap3_boards_compat, .restart = omap_prcm_restart, MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap_prcm_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX -- cgit v0.10.2 From 9725f4451a9ccd159b1d13f63e05896cd9bce07d Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 14 May 2012 10:41:37 -0500 Subject: ARM: OMAP: Add DT support for timer driver In order to add device-tree support to the timer driver the following changes were made ... 1. Allocate system timers (used for clock-events and clock-source) based upon timer properties rather than using an hard-coded timer instance ID. To allow this a new helper function called omap_dmtimer_find_by_property() has been added for finding a timer with the particular properties in the device-tree blob. Please note that this is an internal helper function for system timers only to find a timer in the device-tree blob. This cannot be used by device drivers, another API has been added for that (see below). Timers that are allocated for system timers are dynamically disabled at boot time by adding a status property with the value "disabled" to the timer's device-tree node. Please note that when allocating system timers we now pass a timer ID and timer property. The timer ID is only be used for allocating a timer when booting without device-tree. Once device-tree migration is complete, all the timer ID references will be removed. 2. System timer resources (memory and interrupts) are directly obtained from the device-tree timer node when booting with device-tree, so that system timers are no longer reliant upon the OMAP HWMOD framework to provide these resources. 3. If DT blob is present, then let device-tree create the timer devices dynamically. 4. When device-tree is present the "id" field in the platform_device structure (pdev->id) is initialised to -1 and hence cannot be used to identify a timer instance. Due to this the following changes were made ... a). The API omap_dm_timer_request_specific() is not supported when using device-tree, because it uses the device ID to request a specific timer. This function will return an error if called when device-tree is present. Users of this API should use omap_dm_timer_request_by_cap() instead. b). When removing the DMTIMER driver, the timer "id" was used to identify the timer instance. The remove function has been modified to use the device name instead of the "id". 5. When device-tree is present the platform_data structure will be NULL and so check for this. 6. The OMAP timer device tree binding has the following optional parameters ... a). ti,timer-alwon --> Timer is in an always-on power domain b). ti,timer-dsp --> Timer can generate an interrupt to the on-chip DSP c). ti,timer-pwm --> Timer can generate a PWM output d). ti,timer-secure --> Timer is reserved on a secure OMAP device Search for the above parameters and set the appropriate timer attribute flags. Signed-off-by: Jon Hunter diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index def9a0e..92447cd 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include #include #include @@ -66,11 +68,13 @@ #define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE #define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE #define OMAP3_SECURE_TIMER 12 +#define TIMER_PROP_SECURE "ti,timer-secure" #else #define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE #define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE #define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE #define OMAP3_SECURE_TIMER 1 +#define TIMER_PROP_SECURE "ti,timer-alwon" #endif #define REALTIME_COUNTER_BASE 0x48243200 @@ -156,6 +160,40 @@ static struct of_device_id omap_timer_match[] __initdata = { }; /** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** * omap_dmtimer_init - initialisation function when device tree is used * * For secure OMAP3 devices, timers with device type "timer-secure" cannot @@ -172,43 +210,74 @@ void __init omap_dmtimer_init(void) /* If we are a secure device, remove any secure timer nodes */ if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { - for_each_matching_node(np, omap_timer_match) { - if (of_get_property(np, "ti,timer-secure", NULL)) - prom_add_property(np, &device_disabled); - } + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); } } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; struct resource irq_rsrc, mem_rsrc; size_t size; int res = 0; int r; - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + omap_hwmod_setup_one(oh_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; - - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq_rsrc); + if (r) + return -ENXIO; + timer->irq = irq_rsrc.start; + + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem_rsrc); + if (r) + return -ENXIO; + timer->phys_base = mem_rsrc.start; + size = mem_rsrc.end - mem_rsrc.start; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -219,9 +288,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, omap_hwmod_enable(oh); - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; @@ -231,8 +298,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, } else { res = __omap_dm_timer_set_source(timer->fclk, src); if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } @@ -248,11 +315,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -356,7 +424,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, @@ -468,12 +536,12 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ static void __init omap##name##_timer_init(void) \ { \ omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_clocksource_init((clksrc_nr), clksrc_src); \ } @@ -483,20 +551,23 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3) OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) + TIMER_PROP_SECURE, 2, OMAP3_MPU_SOURCE) OMAP_SYS_TIMER(3_secure) #endif #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) +OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE) OMAP_SYS_TIMER(3_am33xx) #endif @@ -508,7 +579,7 @@ static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, static void __init omap4_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon"); omap2_clocksource_init(2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS /* Local timers are not supprted on OMAP4430 ES1.0 */ @@ -534,7 +605,7 @@ static void __init omap5_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon"); omap2_clocksource_init(2, OMAP4_MPU_SOURCE); realtime_counter_init(); @@ -619,6 +690,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 2574b86..b09e556 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -40,6 +40,8 @@ #include #include #include +#include +#include #include #include @@ -212,6 +214,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) unsigned long flags; int ret = 0; + /* Requesting timer by ID is not supported when device tree is used */ + if (of_have_populated_dt()) { + pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + __func__); + return NULL; + } + spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->pdev->id == id && !t->reserved) { @@ -466,7 +475,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * use the clock framework to set the parent clock. To be removed * once OMAP1 migrated to using clock framework for dmtimers */ - if (pdata->set_timer_src) + if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); fclk = clk_get(&timer->pdev->dev, "fck"); @@ -747,7 +756,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!pdata) { + if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } @@ -776,11 +785,23 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->id = pdev->id; + if (dev->of_node) { + if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) + timer->capability |= OMAP_TIMER_ALWON; + if (of_find_property(dev->of_node, "ti,timer-dsp", NULL)) + timer->capability |= OMAP_TIMER_HAS_DSP_IRQ; + if (of_find_property(dev->of_node, "ti,timer-pwm", NULL)) + timer->capability |= OMAP_TIMER_HAS_PWM; + if (of_find_property(dev->of_node, "ti,timer-secure", NULL)) + timer->capability |= OMAP_TIMER_SECURE; + } else { + timer->id = pdev->id; + timer->capability = pdata->timer_capability; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + } + timer->irq = irq->start; - timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { @@ -820,7 +841,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(timer, &omap_timer_list, node) - if (timer->pdev->id == pdev->id) { + if (!strcmp(dev_name(&timer->pdev->dev), + dev_name(&pdev->dev))) { list_del(&timer->node); ret = 0; break; @@ -830,11 +852,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct of_device_id omap_timer_match[] = { + { .compatible = "ti,omap2-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_timer_match); + static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", + .of_match_table = of_match_ptr(omap_timer_match), }, }; -- cgit v0.10.2 From 9883f7c8dd21acb90697582ca331f3f8a66ac054 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 9 Oct 2012 14:12:26 -0500 Subject: ARM: OMAP2+: Add device-tree support for 32kHz counter For OMAP devices, the 32kHz counter is the default clock-source for the kernel. However, this is not the only possible clock-source the kernel can use for OMAP devices. When booting with device-tree, if the 32kHz counter is the desired clock-source for the kernel, then parse the device-tree blob to ensure that the counter is present and if so map memory for the counter using the device-tree of_iomap() function so we are no longer reliant on the OMAP HWMOD framework to do this for us. Signed-off-by: Jon Hunter diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 92447cd..0758bae 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -159,6 +159,11 @@ static struct of_device_id omap_timer_match[] __initdata = { { } }; +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + /** * omap_get_timer_dt - get a timer using device-tree * @match - device-tree match structure for matching a device type @@ -377,11 +382,26 @@ static u32 notrace dmtimer_read_sched_clock(void) static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -390,7 +410,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; -- cgit v0.10.2 From d9b482c8ba1973a189f2d4c8175d405b87fbf2d7 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 30 Oct 2012 14:45:57 -0400 Subject: hashtable: introduce a small and naive hashtable This hashtable implementation is using hlist buckets to provide a simple hashtable to prevent it from getting reimplemented all over the kernel. Signed-off-by: Sasha Levin [ Merging this now, so that subsystems can start applying Sasha's patches that use this - Linus ] Signed-off-by: Linus Torvalds diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h new file mode 100644 index 0000000..227c624 --- /dev/null +++ b/include/linux/hashtable.h @@ -0,0 +1,192 @@ +/* + * Statically sized hash table implementation + * (C) 2012 Sasha Levin + */ + +#ifndef _LINUX_HASHTABLE_H +#define _LINUX_HASHTABLE_H + +#include +#include +#include +#include +#include + +#define DEFINE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] = \ + { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT } + +#define DECLARE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] + +#define HASH_SIZE(name) (ARRAY_SIZE(name)) +#define HASH_BITS(name) ilog2(HASH_SIZE(name)) + +/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */ +#define hash_min(val, bits) \ + (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)) + +static inline void __hash_init(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + INIT_HLIST_HEAD(&ht[i]); +} + +/** + * hash_init - initialize a hash table + * @hashtable: hashtable to be initialized + * + * Calculates the size of the hashtable from the given parameter, otherwise + * same as hash_init_size. + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_add - add an object to a hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add(hashtable, node, key) \ + hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_add_rcu - add an object to a rcu enabled hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add_rcu(hashtable, node, key) \ + hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_hashed - check whether an object is in any hashtable + * @node: the &struct hlist_node of the object to be checked + */ +static inline bool hash_hashed(struct hlist_node *node) +{ + return !hlist_unhashed(node); +} + +static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + if (!hlist_empty(&ht[i])) + return false; + + return true; +} + +/** + * hash_empty - check whether a hashtable is empty + * @hashtable: hashtable to check + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_del - remove an object from a hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del(struct hlist_node *node) +{ + hlist_del_init(node); +} + +/** + * hash_del_rcu - remove an object from a rcu enabled hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del_rcu(struct hlist_node *node) +{ + hlist_del_init_rcu(node); +} + +/** + * hash_for_each - iterate over a hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry(obj, node, &name[bkt], member) + +/** + * hash_for_each_rcu - iterate over a rcu enabled hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_rcu(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_rcu(obj, node, &name[bkt], member) + +/** + * hash_for_each_safe - iterate over a hashtable safe against removal of + * hash entry + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member) + +/** + * hash_for_each_possible - iterate over all possible objects hashing to the + * same bucket + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible(name, obj, node, member, key) \ + hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_rcu - iterate over all possible objects hashing to the + * same bucket in an rcu enabled hashtable + * in a rcu enabled hashtable + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_rcu(name, obj, node, member, key) \ + hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_safe - iterate over all possible objects hashing to the + * same bucket safe against removals + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \ + hlist_for_each_entry_safe(obj, node, tmp, \ + &name[hash_min(key, HASH_BITS(name))], member) + + +#endif -- cgit v0.10.2 From 998f40b550f257e436485291802fa938e4cf580f Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 2 Nov 2012 18:00:56 -0400 Subject: NFS4: nfs4_opendata_access should return errno Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 091baab..5eec442 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1749,7 +1749,7 @@ static int nfs4_opendata_access(struct rpc_cred *cred, /* even though OPEN succeeded, access is denied. Close the file */ nfs4_close_state(state, fmode); - return -NFS4ERR_ACCESS; + return -EACCES; } /* -- cgit v0.10.2 From 2b674047bef23d49a7ca8ec32f4b9e4e12588621 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 28 Oct 2012 21:59:04 +0000 Subject: bnx2x: fix HW initialization using fw 7.8.x Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f23e8c0..bd1fd3d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { - bnx2x_init_block(bp, BLOCK_BRB1, init_phase); if (IS_MF(bp)) low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); -- cgit v0.10.2 From 57c10b61c84bfed68b1b317d6f507a392724b9c4 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:00 +0000 Subject: drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Tested-by: Roland Stigge Tested-by: Alexandre Pereira da Silva Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 53743f7..af8b414 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1524,6 +1524,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) pldat->dma_buff_base_p); free_irq(ndev->irq, ndev); iounmap(pldat->net_base); + mdiobus_unregister(pldat->mii_bus); mdiobus_free(pldat->mii_bus); clk_disable(pldat->clk); clk_put(pldat->clk); -- cgit v0.10.2 From aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:01 +0000 Subject: drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Signed-off-by: David S. Miller diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index daec9b0..6428fcb 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,6 +234,7 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); + mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); -- cgit v0.10.2 From e3c98512780ae2cfb90be2152ab35294439bb7bb Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 29 Oct 2012 02:02:36 +0000 Subject: cxgb4: Fix unable to get UP event from the LLD If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c1cde11..0df1284 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3416,16 +3416,6 @@ static int adap_init0_config(struct adapter *adapter, int reset) finicsum, cfcsum); /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.ofldcaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; - - /* * And now tell the firmware to use the configuration we just loaded. */ caps_cmd.op_to_write = -- cgit v0.10.2 From 608f62b996c6e140ff7515abe75305aed4726b33 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Wed, 31 Oct 2012 17:46:10 +0900 Subject: thermal: solve compilation errors in rcar_thermal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit following were the errors reported drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’: drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default] include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’ drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’ include/linux/thermal.h:166:29: note: declared here make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1 make: *** [drivers/thermal/rcar_thermal.o] Error 2 with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Signed-off-by: Devendra Naga Signed-off-by: Kuninori Morimoto Signed-off-by: Zhang Rui diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index d445271..f7a1b57 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -210,7 +210,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_free_priv; } - zone = thermal_zone_device_register("rcar_thermal", 0, priv, + zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv, &rcar_thermal_zone_ops, 0, 0); if (IS_ERR(zone)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); -- cgit v0.10.2 From fba4e087361605d1eed63343bb08811f097c83ee Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Sat, 13 Oct 2012 04:41:25 +0400 Subject: ACPI video: Ignore errors after _DOD evaluation. There are systems where video module known to work fine regardless of broken _DOD and ignoring returned value here doesn't cause any issues later. This should fix brightness controls on some laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47861 Signed-off-by: Igor Murzov Reviewed-by: Sergey V Signed-off-by: Zhang Rui diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index f94d4c8..0230cb6 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1345,12 +1345,15 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status; + int status = 0; struct acpi_device *dev; - status = acpi_video_device_enumerate(video); - if (status) - return status; + /* + * There are systems where video module known to work fine regardless + * of broken _DOD and ignoring returned value here doesn't cause + * any issues later. + */ + acpi_video_device_enumerate(video); list_for_each_entry(dev, &device->children, node) { -- cgit v0.10.2 From 3ae53b1e13e1ca7928a3dd2d51ea5417b618560c Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Tue, 23 Oct 2012 14:54:42 +0800 Subject: exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. Signed-off-by: Jonghwan Choi Reviewed-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index fd03e85..6dd29e4 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -815,7 +815,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { }, { }, }; -MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids); +MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids); static inline struct exynos_tmu_platform_data *exynos_get_driver_data( struct platform_device *pdev) -- cgit v0.10.2 From 789336360e0a2aeb9750c16ab704a02cbe035e9e Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Mon, 29 Oct 2012 23:41:48 +0000 Subject: l2tp: fix oops in l2tp_eth_create() error path When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by: Tom Parkin Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index 37b8b8b..76125c5 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -291,6 +291,7 @@ static int l2tp_eth_create(struct net *net, u32 tunnel_id, u32 session_id, u32 p out_del_dev: free_netdev(dev); + spriv->dev = NULL; out_del_session: l2tp_session_delete(session); out: -- cgit v0.10.2 From a4d7e485bca65bd516fced77b03f92419308df72 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 29 Oct 2012 07:30:49 +0000 Subject: vmxnet3: must split too big fragments vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: Eric Dumazet Reported-by: jongman heo Tested-by: jongman heo Cc: Shreyas Bhatewara Reviewed-by: Bhavesh Davda Signed-off-by: Shreyas Bhatewara Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index ce9d4f2..0ae1bcc 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -744,28 +744,43 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + u32 buf_size; - tbi = tq->buf_info + tq->tx_ring.next2fill; - tbi->map_type = VMXNET3_MAP_PAGE; - tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, - 0, skb_frag_size(frag), - DMA_TO_DEVICE); + buf_offset = 0; + len = skb_frag_size(frag); + while (len) { + tbi = tq->buf_info + tq->tx_ring.next2fill; + if (len < VMXNET3_MAX_TX_BUF_SIZE) { + buf_size = len; + dw2 |= len; + } else { + buf_size = VMXNET3_MAX_TX_BUF_SIZE; + /* spec says that for TxDesc.len, 0 == 2^14 */ + } + tbi->map_type = VMXNET3_MAP_PAGE; + tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, + buf_offset, buf_size, + DMA_TO_DEVICE); - tbi->len = skb_frag_size(frag); + tbi->len = buf_size; - gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; - BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); - gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); - gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag)); - gdesc->dword[3] = 0; + gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); + gdesc->dword[2] = cpu_to_le32(dw2); + gdesc->dword[3] = 0; - dev_dbg(&adapter->netdev->dev, - "txd[%u]: 0x%llu %u %u\n", - tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), - le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); - vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); - dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", + tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), + le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + + len -= buf_size; + buf_offset += buf_size; + } } ctx->eop_txd = gdesc; @@ -886,6 +901,18 @@ vmxnet3_prepare_tso(struct sk_buff *skb, } } +static int txd_estimate(const struct sk_buff *skb) +{ + int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1; + int i; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + + count += VMXNET3_TXD_NEEDED(skb_frag_size(frag)); + } + return count; +} /* * Transmits a pkt thru a given tq @@ -914,9 +941,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, union Vmxnet3_GenericDesc tempTxDesc; #endif - /* conservatively estimate # of descriptors to use */ - count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + - skb_shinfo(skb)->nr_frags + 1; + count = txd_estimate(skb); ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP)); -- cgit v0.10.2 From c454e6111d1ef4268fe98e87087216e51c2718c3 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 29 Oct 2012 05:05:33 +0000 Subject: tcp-repair: Handle zero-length data put in rcv queue When sending data into a tcp socket in repair state we should check for the amount of data being 0 explicitly. Otherwise we'll have an skb with seq == end_seq in rcv queue, but tcp doesn't expect this to happen (in particular a warn_on in tcp_recvmsg shoots). Signed-off-by: Pavel Emelyanov Reported-by: Giorgos Mavrikas Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 1db6639..2c2b13a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4529,6 +4529,9 @@ int tcp_send_rcvq(struct sock *sk, struct msghdr *msg, size_t size) struct tcphdr *th; bool fragstolen; + if (size == 0) + return 0; + skb = alloc_skb(size + sizeof(*th), sk->sk_allocation); if (!skb) goto err; -- cgit v0.10.2 From 3d70f8c617a436c7146ecb81df2265b4626dfe89 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Nov 2012 11:07:39 -0800 Subject: Linux 3.7-rc4 diff --git a/Makefile b/Makefile index 42d0e56..a1ccf22 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v0.10.2 From 45cbe6ca07c649fef67c550a84af6fd492d77893 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 5 Nov 2012 18:22:50 +0530 Subject: ARM: dts: omap5-evm: Fix size of memory defined for EVM Memory present for OMAP5-evm is 2GB. But in dts file it is specified as 1GB. Correcting the same. Signed-off-by: Lokesh Vutla Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index c663eba..88d3d9b8 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -15,7 +15,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { -- cgit v0.10.2 From e6900ddf615438edbc53df4d35a37147459d4cd8 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 5 Nov 2012 18:22:51 +0530 Subject: ARM: dts: omap5: EMIF device tree data for OMAP5 boards Adding EMIF device tree data for OMAP5 boards. Signed-off-by: Lokesh Vutla Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ead74c8..790bb2a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -474,5 +474,27 @@ ti,hwmods = "timer11"; ti,timer-pwm; }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; -- cgit v0.10.2 From 4d2750f31935719453ac65829a09766cb22f9943 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 5 Nov 2012 18:22:52 +0530 Subject: ARM: dts: omap5-evm: LPDDR2 memory device details for EVM Samsung's K3PE0E000B memory part is used in OMAP5-evm board. Adding timings and geometry details for Samsung's memory part and attaching the same to device-handle of EMIF1/2. Signed-off-by: Lokesh Vutla Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 88d3d9b8..8722c15 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 0000000..9657a5c --- /dev/null +++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; -- cgit v0.10.2 From 5d9b66f278cb1f137dc6126ed461e747870d9058 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:29 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM Add pinmux configurations for gpio matrix keypad. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 513284f..9199456 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -24,6 +24,21 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; -- cgit v0.10.2 From 2ca1d317aa78492f206d3e325965a990aa33a226 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:30 +0530 Subject: ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm Add matrix keypad device tree data to am335x-evm by adding all the necessary parameters like keymap, row & column gpios and etc. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9199456..8076e66 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -110,6 +110,26 @@ regulator-name = "lis3_reg"; regulator-boot-on; }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; }; /include/ "tps65910.dtsi" -- cgit v0.10.2 From 404aa0d71ddd82189ef3680d6c41f127dc89d29f Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:31 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM Add pinmux configurations for gpio volume keys. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 8076e66..e087b87 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -26,7 +26,7 @@ am33xx_pinmux: pinmux@44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&matrix_keypad_s0>; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; matrix_keypad_s0: matrix_keypad_s0 { pinctrl-single,pins = < @@ -37,6 +37,13 @@ 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ >; }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; }; ocp { -- cgit v0.10.2 From 822c99367ead1e2fa2ba03d42d10aa7c5a84190b Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:32 +0530 Subject: ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm Add gpio based volume keys device tree data to am335x-evm by adding all the required parameters like keycode, gpios and etc. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e087b87..9f65f17 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -137,6 +137,27 @@ 0x0101001c /* ENTER */ 0x0201006c>; /* DOWN */ }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" -- cgit v0.10.2 From 7e782c41da0148af457e474b8744e002af869227 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:33 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE Add pinmux configurations for gpio based user-keys to am335x-bone. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 91eee97..1aac58b 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,6 +24,20 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; -- cgit v0.10.2 From 5d4e17063fa8d0af63e356089a321c482cbd7603 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:34 +0530 Subject: ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone Add gpio-leds device tree data to am335x-bone device to enable gpio based user-leds (USR0, USR1, USR2 and USR3) present on BeagleBone. [koen@dominion.thruhere.net: led0, led1 suggested by koen] Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 1aac58b..2c33888 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -53,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" -- cgit v0.10.2 From 2647dd10fcd85aa1404878e8692a1cab928d3ec7 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:35 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK Add pinmux configurations for gpio based volume keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 6f53879..659ec5b 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -30,6 +30,20 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; -- cgit v0.10.2 From 29b0b84381221e94063ceb4129f4e4bc1bce1215 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:36 +0530 Subject: ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk Add gpio-leds device tree data to am335x-evmsk device to enable gpio based user-leds (USR0, USR1, USR2 and USR3) present on am335x starter kit. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 659ec5b..7262fa8 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -100,6 +100,36 @@ regulator-name = "lis3_reg"; regulator-boot-on; }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; /include/ "tps65910.dtsi" -- cgit v0.10.2 From d98258b81721d452d2da98e9fc83c57e6ef70667 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:37 +0530 Subject: ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK Add pinmux configurations for gpio based keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 7262fa8..0f825dd 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -32,7 +32,7 @@ am33xx_pinmux: pinmux@44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < @@ -42,6 +42,15 @@ 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ >; }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; }; ocp { -- cgit v0.10.2 From 00834b783ee3029a96489fae0c2eb3b1a198205d Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 6 Nov 2012 19:18:38 +0530 Subject: ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk Add gpio based push buttons device tree data to am335x-evmsk device by adding all the necessary parameters like key-code, gpios and etc. Signed-off-by: AnilKumar Ch Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0f825dd..f5a6162 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -139,6 +139,37 @@ default-state = "off"; }; }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; }; /include/ "tps65910.dtsi" -- cgit v0.10.2 From 35b47fbb12b42e6c577716b67a9172fe46e2f9b0 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 6 Nov 2012 19:59:38 +0530 Subject: ARM: dts: AM33XX: Add usbss node Device tree node for usbss on AM33XX. There are two musb controllers on am33xx platform so have port0-mode and port1-mode data. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Santhapuri, Damodar Signed-off-by: Ravi Babu [afzal@ti.com: reg & interrupt property addition] Signed-off-by: Afzal Mohammed Reviewed-by: Felipe Balbi Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5dfd682..20a3f29 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -321,5 +321,22 @@ ti,hwmods = "spi1"; status = "disabled"; }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; -- cgit v0.10.2 From 7340dd530c5f72e63201953677b42c9e5fdb2b3d Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 6 Nov 2012 15:52:23 +0100 Subject: ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 634bd42..2458b69 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb -- cgit v0.10.2 From 0d9250c4cb2387436c0ccc7a580f6cb4f3544e40 Mon Sep 17 00:00:00 2001 From: Ricardo Neri Date: Mon, 5 Nov 2012 15:14:14 +0200 Subject: ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri Signed-off-by: Tomi Valkeinen Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 0000000..75466d2 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a..73bc1a6 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 32baf65..4122efe 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { -- cgit v0.10.2 From 347bf48f2b5d2b45a4e42b89dd61b27ca8baced4 Mon Sep 17 00:00:00 2001 From: Ricardo Neri Date: Mon, 5 Nov 2012 15:14:15 +0200 Subject: ARM: dts: omap4-sdp: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri Signed-off-by: Tomi Valkeinen Signed-off-by: Benoit Cousson diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 0000000..b4a40ff --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 0f57bdf..43e5258 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { -- cgit v0.10.2 From 5a2bc4c6607c709aa69f508502e33aebbf32f1f5 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Tue, 6 Nov 2012 19:26:06 +0530 Subject: usb: musb: dsps: dt binding - add resources, example OMAP2+ family of devices are now obtaining resources via DT, earlier it was obtained from hwmod. Update binding document accrodingly, while at it add example. Signed-off-by: Afzal Mohammed Reviewed-by: Felipe Balbi Signed-off-by: Benoit Cousson diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ca8fa56..707c1a2 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -1,5 +1,7 @@ AM33XX MUSB GLUE - compatible : Should be "ti,musb-am33xx" + - reg : offset and length of register sets, first usbss, then for musb instances + - interrupts : usbss, musb instance interrupts in order - ti,hwmods : must be "usb_otg_hs" - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. @@ -12,3 +14,22 @@ AM33XX MUSB GLUE represents PERIPHERAL. - power : Should be "250". This signifies the controller can supply upto 500mA when operating in host mode. + +Example: + +usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; +}; -- cgit v0.10.2