From 98fd485795db064d0885150e2c0c7f296d8fe06e Mon Sep 17 00:00:00 2001 From: Jacob Schloss Date: Sun, 9 Dec 2012 20:18:25 -0300 Subject: [media] gspca_kinect: add Kinect for Windows USB id Add the USB ID for the Kinect for Windows RGB camera so it can be used with the gspca_kinect driver. Signed-off-by: Jacob Schloss Signed-off-by: Antonio Ospite Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/kinect.c b/drivers/media/usb/gspca/kinect.c index 40ad668..3773a8a 100644 --- a/drivers/media/usb/gspca/kinect.c +++ b/drivers/media/usb/gspca/kinect.c @@ -381,6 +381,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x045e, 0x02ae)}, + {USB_DEVICE(0x045e, 0x02bf)}, {} }; -- cgit v0.10.2 From 2756442e48ab5012b135b9304133d4bc0ebffb17 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 08:08:47 -0300 Subject: [media] gspca_sonixb: Properly wait between i2c writes We must wait for the previous i2c write to complete before starting a new one. Sofar we were getting away with this, but it seems that some parts of the usb-subsystem has been sped up making us go to fast :) This fixes streaming on sn9c103 based cams not working with an "i2c_w error" error. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 70511d5..1220340 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -496,7 +496,7 @@ static void reg_w(struct gspca_dev *gspca_dev, } } -static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) +static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buf) { int retry = 60; @@ -504,16 +504,19 @@ static void i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) return; /* is i2c ready */ - reg_w(gspca_dev, 0x08, buffer, 8); + reg_w(gspca_dev, 0x08, buf, 8); while (retry--) { if (gspca_dev->usb_err < 0) return; - msleep(10); + msleep(1); reg_r(gspca_dev, 0x08); if (gspca_dev->usb_buf[0] & 0x04) { if (gspca_dev->usb_buf[0] & 0x08) { dev_err(gspca_dev->v4l2_dev.dev, - "i2c write error\n"); + "i2c error writing %02x %02x %02x %02x" + " %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); gspca_dev->usb_err = -EIO; } return; @@ -530,7 +533,7 @@ static void i2c_w_vector(struct gspca_dev *gspca_dev, for (;;) { if (gspca_dev->usb_err < 0) return; - reg_w(gspca_dev, 0x08, *buffer, 8); + i2c_w(gspca_dev, *buffer); len -= 8; if (len <= 0) break; -- cgit v0.10.2 From 38e91c6b1279b8ba5e798d35d5647b38f3ae66ea Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Dec 2012 11:17:42 -0300 Subject: [media] gspca_sonixj: Add a small delay after i2c_w1 We already have the same delay in i2c_w8, but it was missing from i2c_w1, adding this delay fixes the Microsoft VX-3000 camera often (but not always) streaming video data with a very green-ish tint. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c index 5a86047..36307a9 100644 --- a/drivers/media/usb/gspca/sonixj.c +++ b/drivers/media/usb/gspca/sonixj.c @@ -1550,6 +1550,7 @@ static void i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) 0, gspca_dev->usb_buf, 8, 500); + msleep(2); if (ret < 0) { pr_err("i2c_w1 err %d\n", ret); gspca_dev->usb_err = ret; -- cgit v0.10.2 From 4a09ab6771276a7fd3f80be4250a0fd0ba5114ad Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Dec 2012 18:27:33 +0100 Subject: m68k: Provide dma_alloc_attrs()/dma_free_attrs() Since commit 0049fb2603b7afb1080776ee691dfa5a3d282357 ("OMAPFB: use dma_alloc_attrs to allocate memory") we have one non-arch user of dma_{alloc,free}_attrs(). Hence provide these functions, as wrappers around dma_{alloc,free}_coherent(). Note that most architectures do it the other way around. But as so far m68k doesn't support the attributes at all, our solution should generate smaller code. Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h index 17f7a45..3e6b844 100644 --- a/arch/m68k/include/asm/dma-mapping.h +++ b/arch/m68k/include/asm/dma-mapping.h @@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t, extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} + static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t flag) { -- cgit v0.10.2 From aaf4f97f267aa0dbc42f089b33325e61aac8622e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Dec 2012 18:27:33 +0100 Subject: asm-generic/dma-mapping-broken.h: Provide dma_alloc_attrs()/dma_free_attrs() Since commit 0049fb2603b7afb1080776ee691dfa5a3d282357 ("OMAPFB: use dma_alloc_attrs to allocate memory") we have one non-arch user of dma_{alloc,free}_attrs(). Hence provide these functions, as wrappers around dma_{alloc,free}_coherent(). Note that most architectures do it the other way around. But as these are dummy functions, we don't care. Signed-off-by: Geert Uytterhoeven Acked-by: Arnd Bergmann diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h index ccf7b4f..6c32af9 100644 --- a/include/asm-generic/dma-mapping-broken.h +++ b/include/asm-generic/dma-mapping-broken.h @@ -16,6 +16,22 @@ extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle); +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + return dma_alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + /* attrs is not supported and ignored */ + dma_free_coherent(dev, size, cpu_addr, dma_handle); +} + #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -- cgit v0.10.2 From e7e29b4cf3c4f2acb2433c45b29d1c7881321d36 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 23 Dec 2012 10:28:00 +0100 Subject: m68k: Wire up finit_module Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 847994c..f9337f6 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include -#define NR_syscalls 348 +#define NR_syscalls 349 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index b94bfbf..625f321 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -353,5 +353,6 @@ #define __NR_process_vm_readv 345 #define __NR_process_vm_writev 346 #define __NR_kcmp 347 +#define __NR_finit_module 348 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c30da5b..3f04ea0 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -368,4 +368,5 @@ ENTRY(sys_call_table) .long sys_process_vm_readv /* 345 */ .long sys_process_vm_writev .long sys_kcmp + .long sys_finit_module -- cgit v0.10.2 From f80b0c904da93b9ad7db2fd9823dd701932df779 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 21 Dec 2012 12:25:44 +0530 Subject: Ensure that kernel_init_freeable() is not inlined into non __init code Commit d6b2123802d "make sure that we always have a return path from kernel_execve()" reshuffled kernel_init()/init_post() to ensure that kernel_execve() has a caller to return to. It removed __init annotation for kernel_init() and introduced/calls a new routine kernel_init_freeable(). Latter however is inlined by any reasonable compiler (ARC gcc 4.4 in this case), causing slight code bloat. This patch forces kernel_init_freeable() as noinline reducing the .text bloat-o-meter vmlinux vmlinux_new add/remove: 1/0 grow/shrink: 0/1 up/down: 374/-334 (40) function old new delta kernel_init_freeable - 374 +374 (.init.text) kernel_init 628 294 -334 (.text) Signed-off-by: Al Viro diff --git a/init/main.c b/init/main.c index 85d69df..92d728a 100644 --- a/init/main.c +++ b/init/main.c @@ -802,7 +802,7 @@ static int run_init_process(const char *init_filename) (const char __user *const __user *)envp_init); } -static void __init kernel_init_freeable(void); +static noinline void __init kernel_init_freeable(void); static int __ref kernel_init(void *unused) { @@ -845,7 +845,7 @@ static int __ref kernel_init(void *unused) "See Linux Documentation/init.txt for guidance."); } -static void __init kernel_init_freeable(void) +static noinline void __init kernel_init_freeable(void) { /* * Wait until kthreadd is all set-up. -- cgit v0.10.2 From f13a3664e4d1de8adc1fc82b981ba4699a731fa1 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 24 Dec 2012 10:51:36 +0530 Subject: CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h Saner transition plan for GENERIC_SIGALTSTACK conversion - instead of adding #define sys_sigaltstack sys_sigaltstack in asm/syscalls.h of architecture if it's pulls asm-generic/syscalls.h, only to have those defines removed once all architectures are converted, make the declaration in said asm-generic/syscalls.h conditional on the lack of GENERIC_SIGALTSTACK. Less messy in intermediate stages that way... Signed-off-by: Vineet Gupta Acked-by: Al Viro Cc: james.hogan@imgtec.com Cc: arnd@arndb.de Cc: torvalds@linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Signed-off-by: Al Viro diff --git a/include/asm-generic/syscalls.h b/include/asm-generic/syscalls.h index 58f466f..1db51b8 100644 --- a/include/asm-generic/syscalls.h +++ b/include/asm-generic/syscalls.h @@ -21,10 +21,12 @@ asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long fd, off_t pgoff); #endif +#ifndef CONFIG_GENERIC_SIGALTSTACK #ifndef sys_sigaltstack asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *, struct pt_regs *); #endif +#endif #ifndef sys_rt_sigreturn asmlinkage long sys_rt_sigreturn(struct pt_regs *regs); -- cgit v0.10.2 From 90228fc110303549aa1d4d86083bf585df8624c3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 03:33:38 -0500 Subject: switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE Makes sigaltstack conversion easier to split into per-architecture parts. Signed-off-by: Al Viro diff --git a/kernel/signal.c b/kernel/signal.c index 7aaa51d..00b4a6d 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -3119,8 +3119,9 @@ int __save_altstack(stack_t __user *uss, unsigned long sp) #ifdef CONFIG_COMPAT #ifdef CONFIG_GENERIC_SIGALTSTACK -asmlinkage long compat_sys_sigaltstack(const compat_stack_t __user *uss_ptr, - compat_stack_t __user *uoss_ptr) +COMPAT_SYSCALL_DEFINE2(sigaltstack, + const compat_stack_t __user *, uss_ptr, + compat_stack_t __user *, uoss_ptr) { stack_t uss, uoss; int ret; -- cgit v0.10.2 From 8d9807b109497ca41d363dc7b6ff2bb6c0d52524 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 14:56:40 -0500 Subject: switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE Strictly speaking, ppc64 needs it for C ABI compliance. Realistically I would be very surprised if e.g. passing 0xffffffff as 'options' argument to waitid() from 32bit task would cause problems, but yes, it puts us into undefined behaviour territory. ppc64 expects int argument to be passed in 64bit register with bits 31..63 containing the same value. SYSCALL_DEFINE on ppc provides a wrapper that normalizes the value passed from userland; so does COMPAT_SYSCALL_DEFINE. Plain declaration of compat_sys_something() with an int argument obviously doesn't. Again, for wait4 and waitid I would be extremely surprised if gcc started to produce code depending on that value having been properly sign-extended - the argument(s) in question end up passed blindly to sys_wait4 and sys_waitid resp. and normalization for native syscalls takes care of their use there. Still, better to use COMPAT_SYSCALL_DEFINE here than worry about nasal daemons... Signed-off-by: Al Viro diff --git a/kernel/compat.c b/kernel/compat.c index f6150e9..0770ac5 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -535,9 +535,11 @@ asmlinkage long compat_sys_getrusage(int who, struct compat_rusage __user *ru) return 0; } -asmlinkage long -compat_sys_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options, - struct compat_rusage __user *ru) +COMPAT_SYSCALL_DEFINE4(wait4, + compat_pid_t, pid, + compat_uint_t __user *, stat_addr, + int, options, + struct compat_rusage __user *, ru) { if (!ru) { return sys_wait4(pid, stat_addr, options, NULL); @@ -564,9 +566,10 @@ compat_sys_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options, } } -asmlinkage long compat_sys_waitid(int which, compat_pid_t pid, - struct compat_siginfo __user *uinfo, int options, - struct compat_rusage __user *uru) +COMPAT_SYSCALL_DEFINE5(waitid, + int, which, compat_pid_t, pid, + struct compat_siginfo __user *, uinfo, int, options, + struct compat_rusage __user *, uru) { siginfo_t info; struct rusage ru; -- cgit v0.10.2 From a566c288826ad4502e43b59570214f18173d7744 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 23 Dec 2012 23:14:49 -0500 Subject: x32: fix waitid() It needs 64bit rusage and 32bit siginfo. glibc never calls it with non-NULL rusage pointer, or we would've seen breakage already... Signed-off-by: Al Viro diff --git a/kernel/compat.c b/kernel/compat.c index 0770ac5..e5cc33c 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -587,7 +587,11 @@ COMPAT_SYSCALL_DEFINE5(waitid, return ret; if (uru) { - ret = put_compat_rusage(&ru, uru); + /* sys_waitid() overwrites everything in ru */ + if (COMPAT_USE_64BIT_TIME) + ret = copy_to_user(uru, &ru, sizeof(ru)); + else + ret = put_compat_rusage(&ru, uru); if (ret) return ret; } -- cgit v0.10.2 From b2ddedcd21f44a5873ee3d6ff6118a2318e01e18 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 24 Dec 2012 12:31:00 -0500 Subject: x32: fix sigtimedwait It needs 64bit timespec. As it is, we end up truncating the timeout to whole seconds; usually it doesn't matter, but for having all sub-second timeouts truncated to one jiffy is visibly wrong. Signed-off-by: Al Viro diff --git a/kernel/compat.c b/kernel/compat.c index e5cc33c..36700e9 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -1001,7 +1001,7 @@ compat_sys_rt_sigtimedwait (compat_sigset_t __user *uthese, sigset_from_compat(&s, &s32); if (uts) { - if (get_compat_timespec(&t, uts)) + if (compat_get_timespec(&t, uts)) return -EFAULT; } -- cgit v0.10.2 From d9699088e4bfaff1778d26192756a5894c3f947b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 31 Dec 2012 08:26:33 -0300 Subject: [media] [FOR,v3.8] omap3isp: Don't include deleted OMAP plat/ header files The plat/iommu.h, plat/iovmm.h and plat/omap-pm.h have been deleted. Don't include them. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index 8759247..b4e81ce 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -34,9 +34,6 @@ #include #include #include -#include -#include -#include #include "ispvideo.h" #include "isp.h" -- cgit v0.10.2 From f4953fe6c4aeada2d5cafd78aa97587a46d2d8f9 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Wed, 2 Jan 2013 15:37:17 +1030 Subject: virtio-blk: Don't free ida when disk is in use When a file system is mounted on a virtio-blk disk, we then remove it and then reattach it, the reattached disk gets the same disk name and ids as the hot removed one. This leads to very nasty effects - mostly rendering the newly attached device completely unusable. Trying what happens when I do the same thing with a USB device, I saw that the sd node simply doesn't get free'd when a device gets forcefully removed. Imitate the same behavior for vd devices. This way broken vd devices simply are never free'd and newly attached ones keep working just fine. Signed-off-by: Alexander Graf Signed-off-by: Rusty Russell Cc: stable@kernel.org diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 0bdde8f..07a18e2 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -889,6 +889,7 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv; int index = vblk->index; + int refc; /* Prevent config work handler from accessing the device. */ mutex_lock(&vblk->config_lock); @@ -903,11 +904,15 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) flush_work(&vblk->config_work); + refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount); put_disk(vblk->disk); mempool_destroy(vblk->pool); vdev->config->del_vqs(vdev); kfree(vblk); - ida_simple_remove(&vd_index_ida, index); + + /* Only free device id if we don't have any users */ + if (refc == 1) + ida_simple_remove(&vd_index_ida, index); } #ifdef CONFIG_PM -- cgit v0.10.2 From 52441fa8f2f1ccc9fa97607c6ccf8b46b9fd15ae Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 3 Jan 2013 11:09:53 +1030 Subject: module: prevent warning when finit_module a 0 sized file If we try to finit_module on a file sized 0 bytes vmalloc will scream and spit out a warning. Since modules have to be bigger than 0 bytes anyways we can just check that beforehand and avoid the warning. Signed-off-by: Sasha Levin Signed-off-by: Rusty Russell diff --git a/kernel/module.c b/kernel/module.c index 250092c..41bc118 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2527,6 +2527,13 @@ static int copy_module_from_fd(int fd, struct load_info *info) err = -EFBIG; goto out; } + + /* Don't hand 0 to vmalloc, it whines. */ + if (stat.size == 0) { + err = -EINVAL; + goto out; + } + info->hdr = vmalloc(stat.size); if (!info->hdr) { err = -ENOMEM; -- cgit v0.10.2 From a07ef784356cf9157bd9bed5254cbb9a82d33722 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:52:05 +0900 Subject: f2fs: introduce f2fs_msg to ease adding information prints Introduced f2fs_msg function to differentiate f2fs specific messages in the log. And, added few informative prints in the mount path, to convey proper error in case of mount failure. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 13c6dfb..8199ee9 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -877,6 +877,8 @@ bool f2fs_empty_dir(struct inode *); * super.c */ int f2fs_sync_fs(struct super_block *, int); +extern __printf(3, 4) +void f2fs_msg(struct super_block *, const char *, const char *, ...); /* * hash.c diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 08a94c8..afa7ef0 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -53,6 +53,18 @@ static match_table_t f2fs_tokens = { {Opt_err, NULL}, }; +void f2fs_msg(struct super_block *sb, const char *level, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + vaf.fmt = fmt; + vaf.va = &args; + printk("%sF2FS-fs (%s): %pV\n", level, sb->s_id, &vaf); + va_end(args); +} + static void init_once(void *foo) { struct f2fs_inode_info *fi = (struct f2fs_inode_info *) foo; @@ -247,7 +259,8 @@ static const struct export_operations f2fs_export_ops = { .get_parent = f2fs_get_parent, }; -static int parse_options(struct f2fs_sb_info *sbi, char *options) +static int parse_options(struct super_block *sb, struct f2fs_sb_info *sbi, + char *options) { substring_t args[MAX_OPT_ARGS]; char *p; @@ -286,7 +299,8 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) break; #else case Opt_nouser_xattr: - pr_info("nouser_xattr options not supported\n"); + f2fs_msg(sb, KERN_INFO, + "nouser_xattr options not supported"); break; #endif #ifdef CONFIG_F2FS_FS_POSIX_ACL @@ -295,7 +309,7 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) break; #else case Opt_noacl: - pr_info("noacl options not supported\n"); + f2fs_msg(sb, KERN_INFO, "noacl options not supported"); break; #endif case Opt_active_logs: @@ -309,8 +323,9 @@ static int parse_options(struct f2fs_sb_info *sbi, char *options) set_opt(sbi, DISABLE_EXT_IDENTIFY); break; default: - pr_err("Unrecognized mount option \"%s\" or missing value\n", - p); + f2fs_msg(sb, KERN_ERR, + "Unrecognized mount option \"%s\" or missing value", + p); return -EINVAL; } } @@ -337,23 +352,36 @@ static loff_t max_file_size(unsigned bits) return result; } -static int sanity_check_raw_super(struct f2fs_super_block *raw_super) +static int sanity_check_raw_super(struct super_block *sb, + struct f2fs_super_block *raw_super) { unsigned int blocksize; - if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) + if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) { + f2fs_msg(sb, KERN_INFO, + "Magic Mismatch, valid(0x%x) - read(0x%x)", + F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic)); return 1; + } /* Currently, support only 4KB block size */ blocksize = 1 << le32_to_cpu(raw_super->log_blocksize); - if (blocksize != PAGE_CACHE_SIZE) + if (blocksize != PAGE_CACHE_SIZE) { + f2fs_msg(sb, KERN_INFO, + "Invalid blocksize (%u), supports only 4KB\n", + blocksize); return 1; + } if (le32_to_cpu(raw_super->log_sectorsize) != - F2FS_LOG_SECTOR_SIZE) + F2FS_LOG_SECTOR_SIZE) { + f2fs_msg(sb, KERN_INFO, "Invalid log sectorsize"); return 1; + } if (le32_to_cpu(raw_super->log_sectors_per_block) != - F2FS_LOG_SECTORS_PER_BLOCK) + F2FS_LOG_SECTORS_PER_BLOCK) { + f2fs_msg(sb, KERN_INFO, "Invalid log sectors per block"); return 1; + } return 0; } @@ -414,13 +442,16 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; /* set a temporary block size */ - if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) + if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) { + f2fs_msg(sb, KERN_ERR, "unable to set blocksize"); goto free_sbi; + } /* read f2fs raw super block */ raw_super_buf = sb_bread(sb, 0); if (!raw_super_buf) { err = -EIO; + f2fs_msg(sb, KERN_ERR, "unable to read superblock"); goto free_sbi; } raw_super = (struct f2fs_super_block *) @@ -438,12 +469,14 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) set_opt(sbi, POSIX_ACL); #endif /* parse mount options */ - if (parse_options(sbi, (char *)data)) + if (parse_options(sb, sbi, (char *)data)) goto free_sb_buf; /* sanity checking of raw super */ - if (sanity_check_raw_super(raw_super)) + if (sanity_check_raw_super(sb, raw_super)) { + f2fs_msg(sb, KERN_ERR, "Can't find a valid F2FS filesystem"); goto free_sb_buf; + } sb->s_maxbytes = max_file_size(le32_to_cpu(raw_super->log_blocksize)); sb->s_max_links = F2FS_LINK_MAX; @@ -477,18 +510,23 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* get an inode for meta space */ sbi->meta_inode = f2fs_iget(sb, F2FS_META_INO(sbi)); if (IS_ERR(sbi->meta_inode)) { + f2fs_msg(sb, KERN_ERR, "Failed to read F2FS meta data inode"); err = PTR_ERR(sbi->meta_inode); goto free_sb_buf; } err = get_valid_checkpoint(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, "Failed to get valid F2FS checkpoint"); goto free_meta_inode; + } /* sanity checking of checkpoint */ err = -EINVAL; - if (sanity_check_ckpt(raw_super, sbi->ckpt)) + if (sanity_check_ckpt(raw_super, sbi->ckpt)) { + f2fs_msg(sb, KERN_ERR, "Invalid F2FS checkpoint"); goto free_cp; + } sbi->total_valid_node_count = le32_to_cpu(sbi->ckpt->valid_node_count); @@ -510,17 +548,24 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* setup f2fs internal modules */ err = build_segment_manager(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, + "Failed to initialize F2FS segment manager"); goto free_sm; + } err = build_node_manager(sbi); - if (err) + if (err) { + f2fs_msg(sb, KERN_ERR, + "Failed to initialize F2FS node manager"); goto free_nm; + } build_gc_manager(sbi); /* get an inode for node space */ sbi->node_inode = f2fs_iget(sb, F2FS_NODE_INO(sbi)); if (IS_ERR(sbi->node_inode)) { + f2fs_msg(sb, KERN_ERR, "Failed to read node inode"); err = PTR_ERR(sbi->node_inode); goto free_nm; } @@ -533,6 +578,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) /* read root inode and dentry */ root = f2fs_iget(sb, F2FS_ROOT_INO(sbi)); if (IS_ERR(root)) { + f2fs_msg(sb, KERN_ERR, "Failed to read root inode"); err = PTR_ERR(root); goto free_node_inode; } -- cgit v0.10.2 From 3af60a49fd2edfe9c5a06bc84d4832450895be96 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:52:37 +0900 Subject: f2fs: fix time update in case of f2fs fallocate After doing a punch hole or expanding inode doing fallocation. The change and modification time are not update for the file. So, update time after no issue is observed in fallocate. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 7f9ea92..88593c5 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -545,6 +545,11 @@ static long f2fs_fallocate(struct file *file, int mode, else ret = expand_inode_data(inode, offset, len, mode); + if (!ret) { + inode->i_mtime = inode->i_ctime = CURRENT_TIME; + mark_inode_dirty(inode); + } + f2fs_balance_fs(sbi); return ret; } -- cgit v0.10.2 From 24c366a9ea256b86426b42e75f764495a2558861 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sun, 30 Dec 2012 14:53:08 +0900 Subject: f2fs: remove unneeded INIT_LIST_HEAD at few places While creating a new entry for addition to the list(orphan inode list and fsync inode entry list), there is no need to call HEAD initialization for these entries. So, remove that init part. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index 6ef36c3..d75c86a 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -214,7 +214,6 @@ retry: goto retry; } new->ino = ino; - INIT_LIST_HEAD(&new->list); /* add new_oentry into list which is sorted by inode number */ if (orphan) { diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index b571fee..502c63d 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -151,7 +151,6 @@ static int find_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head) goto out; } - INIT_LIST_HEAD(&entry->list); list_add_tail(&entry->list, head); entry->blkaddr = blkaddr; } -- cgit v0.10.2 From 9268cc3523c120eed04a6ad980753d6e7b82d071 Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Mon, 31 Dec 2012 13:59:04 +0800 Subject: f2fs: update f2fs document to reflect SIT/NAT layout correctly document to reflect the layout generated by mkfs.f2fs . Signed-off-by: Huajun Li Signed-off-by: Jaegeuk Kim diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 8fbd8b4..dcf338e 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -175,9 +175,9 @@ consists of multiple segments as described below. align with the zone size <-| |-> align with the segment size _________________________________________________________________________ - | | | Node | Segment | Segment | | - | Superblock | Checkpoint | Address | Info. | Summary | Main | - | (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | | + | | | Segment | Node | Segment | | + | Superblock | Checkpoint | Info. | Address | Summary | Main | + | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | |____________|_____2______|______N______|______N______|______N_____|__N___| . . . . @@ -200,14 +200,14 @@ consists of multiple segments as described below. : It contains file system information, bitmaps for valid NAT/SIT sets, orphan inode lists, and summary entries of current active segments. -- Node Address Table (NAT) - : It is composed of a block address table for all the node blocks stored in - Main area. - - Segment Information Table (SIT) : It contains segment information such as valid block count and bitmap for the validity of all the blocks. +- Node Address Table (NAT) + : It is composed of a block address table for all the node blocks stored in + Main area. + - Segment Summary Area (SSA) : It contains summary entries which contains the owner information of all the data and node blocks stored in Main area. @@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are valid, as shown as below. +--------+----------+---------+ - | CP | NAT | SIT | + | CP | SIT | NAT | +--------+----------+---------+ . . . . . . . . . . . . +-------+-------+--------+--------+--------+--------+ - | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 | + | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | +-------+-------+--------+--------+--------+--------+ | ^ ^ | | | -- cgit v0.10.2 From 7880ceedec55fbc3997d80e68670d03395225367 Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Mon, 31 Dec 2012 13:59:09 +0800 Subject: f2fs: update f2fs partition info about SIT/NAT layout Update partition info output under debug FS to reflect segment layout correctly. Signed-off-by: Huajun Li Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index 0e0380a..b8ed7a7 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -190,8 +190,8 @@ static int stat_show(struct seq_file *s, void *v) update_general_status(si->sbi); seq_printf(s, "\n=====[ partition info. #%d ]=====\n", i++); - seq_printf(s, "[SB: 1] [CP: 2] [NAT: %d] [SIT: %d] ", - si->nat_area_segs, si->sit_area_segs); + seq_printf(s, "[SB: 1] [CP: 2] [SIT: %d] [NAT: %d] ", + si->sit_area_segs, si->nat_area_segs); seq_printf(s, "[SSA: %d] [MAIN: %d", si->ssa_area_segs, si->main_area_segs); seq_printf(s, "(OverProv:%d Resv:%d)]\n\n", -- cgit v0.10.2 From d66d1f76878fcb1e78592fe8aecd13f438d6c0d7 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 08:57:21 +0900 Subject: f2fs: initialize newly allocated dnode structure This patch resolves Coverity #753112. In practical, the existing code flow does not fall into the reported errorneous path. But, anyway, let's avoid this for future. Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 8199ee9..2807132 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -211,11 +211,11 @@ struct dnode_of_data { static inline void set_new_dnode(struct dnode_of_data *dn, struct inode *inode, struct page *ipage, struct page *npage, nid_t nid) { + memset(dn, 0, sizeof(*dn)); dn->inode = inode; dn->inode_page = ipage; dn->node_page = npage; dn->nid = nid; - dn->inode_page_locked = 0; } /* -- cgit v0.10.2 From c1b75eabec4eddce55ebb078f84481f58272878f Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 09:24:28 +0900 Subject: f2fs: avoid null dereference in f2fs_acl_from_disk This patch resolves Coverity #751303: >>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null >>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)", which dereferences it. [Error path] - value = NULL; - retval = 0 by f2fs_getxattr(); - f2fs_acl_from_disk(value:NULL, ...); Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/acl.c b/fs/f2fs/acl.c index e95b949..137af42 100644 --- a/fs/f2fs/acl.c +++ b/fs/f2fs/acl.c @@ -191,15 +191,14 @@ struct posix_acl *f2fs_get_acl(struct inode *inode, int type) retval = f2fs_getxattr(inode, name_index, "", value, retval); } - if (retval < 0) { - if (retval == -ENODATA) - acl = NULL; - else - acl = ERR_PTR(retval); - } else { + if (retval > 0) acl = f2fs_acl_from_disk(value, retval); - } + else if (retval == -ENODATA) + acl = NULL; + else + acl = ERR_PTR(retval); kfree(value); + if (!IS_ERR(acl)) set_cached_acl(inode, type, acl); -- cgit v0.10.2 From c335a86930b4841c11df12e1fdfd8345e0ebce84 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 09:33:20 +0900 Subject: f2fs: check return value during recovery This patch resolves Coverity #753102: >>> No check of the return value of "f2fs_add_link(&dent, inode)". Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index 502c63d..6cc046d 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -67,7 +67,7 @@ static int recover_dentry(struct page *ipage, struct inode *inode) kunmap(page); f2fs_put_page(page, 0); } else { - f2fs_add_link(&dent, inode); + err = f2fs_add_link(&dent, inode); } iput(dir); out: -- cgit v0.10.2 From ac706bf75cb99b91bf2792c52ab5b2e4b94560a1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 17 Dec 2012 07:38:16 -0300 Subject: [media] v4l: vb2: Set data_offset to 0 for single-plane output buffers Single-planar V4L2 buffers are converted to multi-planar vb2 buffers with a single plane when queued. The plane data_offset field is not available in the single-planar API and must be set to 0 for all output buffers. Signed-off-by: Laurent Pinchart Acked-by: Marek Szyprowski Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 9f81be2..e02c479 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -921,8 +921,10 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb, const struct v4l2_buffer *b * In videobuf we use our internal V4l2_planes struct for * single-planar buffers as well, for simplicity. */ - if (V4L2_TYPE_IS_OUTPUT(b->type)) + if (V4L2_TYPE_IS_OUTPUT(b->type)) { v4l2_planes[0].bytesused = b->bytesused; + v4l2_planes[0].data_offset = 0; + } if (b->memory == V4L2_MEMORY_USERPTR) { v4l2_planes[0].m.userptr = b->m.userptr; -- cgit v0.10.2 From 12861dc659c7181e0b52facd97df70c6dd326106 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 12:49:12 -0300 Subject: [media] m5mols: Fix typo in get_fmt callback The check of return value from __find_format() was inverted by mistake. This patch fixes regression introduced in commit 5565a2ad47 [media] m5mols: Protect driver data with a mutex Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index 8131d65..b9b4485 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -556,7 +556,7 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, mutex_lock(&info->lock); format = __find_format(info, fh, fmt->which, info->res_type); - if (!format) + if (format) fmt->format = *format; else ret = -EINVAL; -- cgit v0.10.2 From a26860bdbd632278bbbcc2261b4c28f965472741 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Dec 2012 13:43:05 -0300 Subject: [media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links() Make sure 'ret' is not used uninitialized. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 1bd5678..3b74c4a 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -593,7 +593,7 @@ static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) { struct media_entity *source, *sink; unsigned int flags = MEDIA_LNK_FL_ENABLED; - int i, ret; + int i, ret = 0; for (i = 0; i < FIMC_LITE_MAX_DEVS; i++) { struct fimc_lite *fimc = fmd->fimc_lite[i]; -- cgit v0.10.2 From 7296e25f6e76bedc96cb1f16c200e9ac7a87323b Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Fri, 21 Dec 2012 05:32:59 -0300 Subject: [media] s5p-mfc: Fix interrupt error handling routine New context states were added but handling in s5p_mfc_handle_error for these states was not. After this patch these states are be handled correctly. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 3afe879..5448ad1 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -412,62 +412,48 @@ leave_handle_frame: } /* Error handling for interrupt */ -static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx, - unsigned int reason, unsigned int err) +static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev, + struct s5p_mfc_ctx *ctx, unsigned int reason, unsigned int err) { - struct s5p_mfc_dev *dev; unsigned long flags; - /* If no context is available then all necessary - * processing has been done. */ - if (ctx == NULL) - return; - - dev = ctx->dev; mfc_err("Interrupt Error: %08x\n", err); - s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); - wake_up_dev(dev, reason, err); - /* Error recovery is dependent on the state of context */ - switch (ctx->state) { - case MFCINST_INIT: - /* This error had to happen while acquireing instance */ - case MFCINST_GOT_INST: - /* This error had to happen while parsing the header */ - case MFCINST_HEAD_PARSED: - /* This error had to happen while setting dst buffers */ - case MFCINST_RETURN_INST: - /* This error had to happen while releasing instance */ - clear_work_bit(ctx); - wake_up_ctx(ctx, reason, err); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - ctx->state = MFCINST_ERROR; - break; - case MFCINST_FINISHING: - case MFCINST_FINISHED: - case MFCINST_RUNNING: - /* It is higly probable that an error occured - * while decoding a frame */ - clear_work_bit(ctx); - ctx->state = MFCINST_ERROR; - /* Mark all dst buffers as having an error */ - spin_lock_irqsave(&dev->irqlock, flags); - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->dst_queue, - &ctx->vq_dst); - /* Mark all src buffers as having an error */ - s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, &ctx->src_queue, - &ctx->vq_src); - spin_unlock_irqrestore(&dev->irqlock, flags); - if (test_and_clear_bit(0, &dev->hw_lock) == 0) - BUG(); - s5p_mfc_clock_off(); - break; - default: - mfc_err("Encountered an error interrupt which had not been handled\n"); - break; + if (ctx != NULL) { + /* Error recovery is dependent on the state of context */ + switch (ctx->state) { + case MFCINST_RES_CHANGE_INIT: + case MFCINST_RES_CHANGE_FLUSH: + case MFCINST_RES_CHANGE_END: + case MFCINST_FINISHING: + case MFCINST_FINISHED: + case MFCINST_RUNNING: + /* It is higly probable that an error occured + * while decoding a frame */ + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + /* Mark all dst buffers as having an error */ + spin_lock_irqsave(&dev->irqlock, flags); + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->dst_queue, &ctx->vq_dst); + /* Mark all src buffers as having an error */ + s5p_mfc_hw_call(dev->mfc_ops, cleanup_queue, + &ctx->src_queue, &ctx->vq_src); + spin_unlock_irqrestore(&dev->irqlock, flags); + wake_up_ctx(ctx, reason, err); + break; + default: + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + wake_up_ctx(ctx, reason, err); + break; + } } + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); + s5p_mfc_clock_off(); + wake_up_dev(dev, reason, err); return; } @@ -632,7 +618,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) dev->warn_start) s5p_mfc_handle_frame(ctx, reason, err); else - s5p_mfc_handle_error(ctx, reason, err); + s5p_mfc_handle_error(dev, ctx, reason, err); clear_bit(0, &dev->enter_suspend); break; -- cgit v0.10.2 From 216c82c6aba63eeb49d7654b448e0d47bea255bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 3 Jan 2013 17:23:24 -0300 Subject: [media] omap3isp: Don't include The plat/*.h headers are not available to drivers in multiplatform kernels. As the header isn't needed, just remove it. Signed-off-by: Laurent Pinchart Acked-by: Tony Lindgren Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index b34bf92..48182e6 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -70,8 +70,6 @@ #include #include -#include - #include "isp.h" #include "ispreg.h" #include "ispccdc.h" -- cgit v0.10.2 From ac4989874af56435c308bdde9ad9c837a26f8b23 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 25 Oct 2012 10:22:32 -0600 Subject: ioat: Fix DMA memory sync direction correct flag ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug. Fixed the dma_sync_single_for_device() call to use the correct direction. [ 226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550() [ 226.288948] Hardware name: ProLiant DL380p Gen8 [ 226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE] [ 226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 226.288967] Pid: 1055, comm: work_for_cpu Tainted: G W 3.3.0-0.20.el7.x86_64 #1 [ 226.288968] Call Trace: [ 226.288974] [] warn_slowpath_common+0x7f/0xc0 [ 226.288977] [] warn_slowpath_fmt+0x46/0x50 [ 226.288980] [] check_sync+0x132/0x550 [ 226.288983] [] debug_dma_sync_single_for_device+0x3f/0x50 [ 226.288988] [] ? wait_for_common+0x72/0x180 [ 226.288995] [] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma] [ 226.288999] [] ? kfree+0x259/0x270 [ 226.289004] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289008] [] ioat_probe+0x2f8/0x348 [ioatdma] [ 226.289011] [] ioat3_dma_probe+0x1d5/0x2aa [ioatdma] [ 226.289016] [] ioat_pci_probe+0x139/0x17c [ioatdma] [ 226.289020] [] local_pci_probe+0x5c/0xd0 [ 226.289023] [] ? destroy_work_on_stack+0x20/0x20 [ 226.289025] [] do_work_for_cpu+0x18/0x30 [ 226.289029] [] kthread+0xb7/0xc0 [ 226.289033] [] kernel_thread_helper+0x4/0x10 [ 226.289036] [] ? _raw_spin_unlock_irq+0x30/0x50 [ 226.289038] [] ? retint_restore_args+0x13/0x13 [ 226.289041] [] ? kthread_worker_fn+0x1a0/0x1a0 [ 226.289044] [] ? gs_change+0x13/0x13 [ 226.289045] ---[ end trace e1618afc7a606089 ]--- [ 226.289047] Mapped at: [ 226.289048] [] debug_dma_map_page+0x87/0x150 [ 226.289050] [] dma_map_page.constprop.18+0x70/0xb34 [ioatdma] [ 226.289054] [] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma] [ 226.289058] [] ioat3_dma_self_test+0x1b/0x20 [ioatdma] [ 226.289061] [] ioat_probe+0x2f8/0x348 [ioatdma] Signed-off-by: Shuah Khan CC: Signed-off-by: Vinod Koul diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f7f1dc6..ed0e8b7 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -951,7 +951,7 @@ static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device) goto free_resources; } } - dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE); + dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE); /* skip validate if the capability is not present */ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask)) -- cgit v0.10.2 From 14c9bc6fba3f44e89f8bb66b0290dbcf36832607 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 22 Oct 2012 15:34:41 +1000 Subject: m68knommu: add KMAP definitions for non-MMU definitions To be consistent with the set of MMU definitions we should define KMAP_START and KMAP_END. Future common m68k code will use their values. Signed-off-by: Greg Ungerer Acked-by: Geert Uytterhoeven diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h index bf86b29..037028f 100644 --- a/arch/m68k/include/asm/pgtable_no.h +++ b/arch/m68k/include/asm/pgtable_no.h @@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp); */ #define VMALLOC_START 0 #define VMALLOC_END 0xffffffff +#define KMAP_START 0 +#define KMAP_END 0xffffffff #include -- cgit v0.10.2 From d6fccc756328441511c2b752d394a2b3dae4ec31 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Jan 2013 16:13:04 +1000 Subject: m68k: fix conditional use of init_pointer_table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling 3.8-rc1 fails for some m68k targets (the non-mmu ones) with: CC arch/m68k/mm/init.o arch/m68k/mm/init.c: In function ‘mem_init’: arch/m68k/mm/init.c:191:2: error: implicit declaration of function ‘init_pointer_table’ arch/m68k/mm/init.c:191:36: error: ‘kernel_pg_dir’ undeclared (first use in this function) arch/m68k/mm/init.c:191:36: note: each undeclared identifier is reported only once for each function it appears in arch/m68k/mm/init.c:192:18: error: ‘PTRS_PER_PGD’ undeclared (first use in this function) arch/m68k/mm/init.c:194:4: error: implicit declaration of function ‘__pgd_page’ arch/m68k/mm/init.c:198:6: error: ‘zero_pgtable’ undeclared (first use in this function) make[2]: *** [arch/m68k/mm/init.o] Error 1 make[1]: *** [arch/m68k/mm] Error 2 make[1]: Leaving directory `/home/gerg/new-wave.git/linux-3.x' make: *** [linux] Error 1 Change the conditions that define init_pointer_table so that it matches what actually uses it. Signed-off-by: Greg Ungerer diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index f0e05bc..afd8106f 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -39,6 +39,11 @@ void *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); +#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) +extern void init_pointer_table(unsigned long ptable); +extern pmd_t *zero_pgtable; +#endif + #ifdef CONFIG_MMU pg_data_t pg_data_map[MAX_NUMNODES]; @@ -69,9 +74,6 @@ void __init m68k_setup_node(int node) node_set_online(node); } -extern void init_pointer_table(unsigned long ptable); -extern pmd_t *zero_pgtable; - #else /* CONFIG_MMU */ /* -- cgit v0.10.2 From cabd91c3bb74a5bc43c3192126af752891d11d77 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 1 Apr 2012 12:57:18 -0400 Subject: parisc: avoid undefined shift in cnv_float.h The attached change fixes a float conversion problem found running the GCC testsuite with GCC configured with --with-arch=2.0. The actual problem occurs for an exponent value of 63. This is the maximum exponent value that can be passed. This causes a left shift by 32 in the else hunk of the macro. This causes undefined behavior and the wrong value is returned for dresultB. The fix is the check "exponent <= 62". If the exponent is 63, dresultB is set to 0. The patch also optimizes the operation a bit by copying "Sall(sgl_value) << SGL_EXP_LENGTH" to val, so that sgl_value is not modified. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/math-emu/cnv_float.h b/arch/parisc/math-emu/cnv_float.h index 9071e09..933423f 100644 --- a/arch/parisc/math-emu/cnv_float.h +++ b/arch/parisc/math-emu/cnv_float.h @@ -347,16 +347,15 @@ Sgl_isinexact_to_fix(sgl_value,exponent) #define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \ - {Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \ + {unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH; \ if (exponent <= 31) { \ - Dintp1(dresultA) = 0; \ - Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \ + Dintp1(dresultA) = 0; \ + Dintp2(dresultB) = val >> (31 - exponent); \ } \ else { \ - Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \ - Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \ + Dintp1(dresultA) = val >> (63 - exponent); \ + Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0; \ } \ - Sall(sgl_value) >>= SGL_EXP_LENGTH; /* return to original */ \ } #define Duint_setzero(dresultA,dresultB) \ -- cgit v0.10.2 From cac1f12b9f7409510a5abcf3eaecc2c56b75242a Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 12 Jun 2011 01:46:41 +0000 Subject: parisc: don't claim cpu irqs more than once The CPU irqs (timer and IPI) are not shared and only need to be claimed once. A mismatch error occurs if they are claimed more than once. Signed-off-by: John David Anglin Cc: Kyle McMartin Cc: Helge Deller Cc: "James E.J. Bottomley" Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index c0b1aff..0299d63 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -410,11 +410,13 @@ void __init init_IRQ(void) { local_irq_disable(); /* PARANOID - should already be disabled */ mtctl(~0UL, 23); /* EIRR : clear all pending external intr */ - claim_cpu_irqs(); #ifdef CONFIG_SMP - if (!cpu_eiem) + if (!cpu_eiem) { + claim_cpu_irqs(); cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ); + } #else + claim_cpu_irqs(); cpu_eiem = EIEM_MASK(TIMER_IRQ); #endif set_eiem(cpu_eiem); /* EIEM : enable all external intr */ -- cgit v0.10.2 From 34360f080cb5848990576e1465d2d01a3c261762 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Dec 2012 23:18:01 +0000 Subject: parisc: improve ptrace support for gdb single-step Various GCC tests use gdb to simulate a multithreaded application. Many of these tests have been failing on parisc linux. GCC does this by using gdb to single-step the application, then gdb is used to call other test specific code. Where this fails is when the application is stepped into the delay slot of a taken branch. This sets the PSW B bit. When the test specific code is executed, this usually clears the PSW B bit. Currently, gdb is not allowed to set the B bit. So, the code falls through what should be a taken branch. The attached patch adds the PSW B bit to the set of bits that gdb is allowed to set. In order to set the B bit, the trace system call must return using an interrupt restore. The patch also modifies this code to use the saved IAOQ values when they are saved by a ptrace syscall or interruption. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index bfb4424..eb7850b 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -1865,7 +1865,7 @@ syscall_restore: /* Are we being ptraced? */ ldw TASK_FLAGS(%r1),%r19 - ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2 + ldi _TIF_SYSCALL_TRACE_MASK,%r2 and,COND(=) %r19,%r2,%r0 b,n syscall_restore_rfi @@ -1978,15 +1978,23 @@ syscall_restore_rfi: /* sr2 should be set to zero for userspace syscalls */ STREG %r0,TASK_PT_SR2(%r1) -pt_regs_ok: LDREG TASK_PT_GR31(%r1),%r2 - depi 3,31,2,%r2 /* ensure return to user mode. */ - STREG %r2,TASK_PT_IAOQ0(%r1) + depi 3,31,2,%r2 /* ensure return to user mode. */ + STREG %r2,TASK_PT_IAOQ0(%r1) ldo 4(%r2),%r2 STREG %r2,TASK_PT_IAOQ1(%r1) + b intr_restore copy %r25,%r16 + +pt_regs_ok: + LDREG TASK_PT_IAOQ0(%r1),%r2 + depi 3,31,2,%r2 /* ensure return to user mode. */ + STREG %r2,TASK_PT_IAOQ0(%r1) + LDREG TASK_PT_IAOQ1(%r1),%r2 + depi 3,31,2,%r2 + STREG %r2,TASK_PT_IAOQ1(%r1) b intr_restore - nop + copy %r25,%r16 .import schedule,code syscall_do_resched: diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 857c2f5..534abd4 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -26,7 +26,7 @@ #include /* PSW bits we allow the debugger to modify */ -#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB) +#define USER_PSW_BITS (PSW_N | PSW_B | PSW_V | PSW_CB) /* * Called by kernel/ptrace.c when detaching.. -- cgit v0.10.2 From ad30f3ff3deb4037f2beea15812d01d795f8b3cc Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sun, 25 Nov 2012 21:39:00 +0000 Subject: parisc: sigaltstack doesn't round ss.ss_sp as required On 24-Nov-12, at 10:05 AM, John David Anglin wrote: > In trying to build the debian libsigsegv2 package, I found that sigaltstack > doesn't round ss.ss_sp. The tests intentionally pass an unaligned pointer. > This results in the two stack overflow tests failing. The attached patch fixes this issue. Signed-off-by: John David Anglin Signed-off-by: Helge Deller diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 5379969..fd05170 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n", (unsigned long)ka, sp, frame_size); + /* Align alternate stack and reserve 64 bytes for the signal + handler's frame marker. */ if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) - sp = current->sas_ss_sp; /* Stacks grow up! */ + sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */ DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp); return (void __user *) sp; /* Stacks grow up. Fun. */ -- cgit v0.10.2 From e909c682d04e55e77a3c9d158e7dc36027195493 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 7 Jan 2013 10:57:14 +0100 Subject: [media] coda: Fix build due to iram.h rename commit c045e3f13 (ARM: imx: include iram.h rather than mach/iram.h) changed the location of iram.h, which causes the following build error when building the coda driver: drivers/media/platform/coda.c:27:23: error: mach/iram.h: No such file or directory drivers/media/platform/coda.c: In function 'coda_probe': drivers/media/platform/coda.c:2000: error: implicit declaration of function 'iram_alloc' drivers/media/platform/coda.c:2001: warning: assignment makes pointer from integer without a cast drivers/media/platform/coda.c: In function 'coda_remove': drivers/media/platform/coda.c:2024: error: implicit declaration of function 'iram_free' Since the content of iram.h is not imx specific, move it to include/linux/platform_data/imx-iram.h instead. This is an intermediate solution until the i.MX iram allocator is converted to the generic SRAM allocator. Signed-off-by: Sascha Hauer Acked-by: Mauro Carvalho Chehab diff --git a/arch/arm/mach-imx/iram.h b/arch/arm/mach-imx/iram.h deleted file mode 100644 index 022690c..0000000 --- a/arch/arm/mach-imx/iram.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#include - -#ifdef CONFIG_IRAM_ALLOC - -int __init iram_init(unsigned long base, unsigned long size); -void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); -void iram_free(unsigned long dma_addr, unsigned int size); - -#else - -static inline int __init iram_init(unsigned long base, unsigned long size) -{ - return -ENOMEM; -} - -static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) -{ - return NULL; -} - -static inline void iram_free(unsigned long base, unsigned long size) {} - -#endif diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 6c80424..e05cf40 100644 --- a/arch/arm/mach-imx/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,8 +22,7 @@ #include #include #include - -#include "iram.h" +#include "linux/platform_data/imx-iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c index 7b8b547..afadd3a 100644 --- a/drivers/media/platform/coda.c +++ b/drivers/media/platform/coda.c @@ -23,8 +23,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/include/linux/platform_data/imx-iram.h b/include/linux/platform_data/imx-iram.h new file mode 100644 index 0000000..022690c --- /dev/null +++ b/include/linux/platform_data/imx-iram.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include + +#ifdef CONFIG_IRAM_ALLOC + +int __init iram_init(unsigned long base, unsigned long size); +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); +void iram_free(unsigned long dma_addr, unsigned int size); + +#else + +static inline int __init iram_init(unsigned long base, unsigned long size) +{ + return -ENOMEM; +} + +static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + return NULL; +} + +static inline void iram_free(unsigned long base, unsigned long size) {} + +#endif -- cgit v0.10.2 From 5f79c651e81e7731e9f252ac420bd81e144199d6 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 7 Jan 2013 17:26:58 +0100 Subject: arm: mvebu: use global interrupts for GPIOs on Armada XP The Armada XP GPIO controller has two ways of notifying interrupts: using global interrupts or using per-CPU interrupts. In an attempt to use the best available features, the 'marvell,armadaxp-gpio' compatible string selects a variant of the gpio-mvebu driver that makes use of the per-CPU interrupts. Unfortunately, this doesn't work properly in a SMP context, because we fall into cases where the GPIO interrupt is enabled on CPU X at the GPIO controller level, but on CPU Y at the interrupt controller level. It is not yet clear how to fix that easily. So for 3.8, our approach is to switch to global interrupts for GPIOs, so that we do not fall into this per-CPU interrupts problem. This patch therefore fixes GPIO interrupts on Armada XP platforms. Without this patch, GPIO interrupts simply do not work reliably, because their proper operation depends on which CPU the code requesting the interrupt is running. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a..e041f42 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937d..9e23bd8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3..9659661 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { -- cgit v0.10.2 From bef2a8d3f6cb91bc8743bdd63d3eb6a37bf27b12 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Tue, 30 Oct 2012 15:58:50 +0000 Subject: dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin Signed-off-by: Vinod Koul diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index dbf0e6f..a7dcf78 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -684,9 +684,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - imxdmac->hw_chaining = 1; - if (!imxdma_hw_chain(imxdmac)) - return -EINVAL; + imxdmac->hw_chaining = 0; + imxdmac->ccr_from_device = (mode | IMX_DMA_TYPE_FIFO) | ((IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) << 2) | CCR_REN; -- cgit v0.10.2 From b9bb37f5486ba05d2b557dbf1aeb754fef618985 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 9 Jan 2013 15:26:22 +0530 Subject: dma: tegra: implement flags parameters for cyclic transfer The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan CC: Signed-off-by: Vinod Koul diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index efdfffa..bf58bb8 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get( if (async_tx_test_ack(&dma_desc->txd)) { list_del(&dma_desc->node); spin_unlock_irqrestore(&tdc->lock, flags); + dma_desc->txd.flags = 0; return dma_desc; } } @@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT; ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32; - csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC; + csr |= TEGRA_APBDMA_CSR_FLOW; + if (flags & DMA_PREP_INTERRUPT) + csr |= TEGRA_APBDMA_CSR_IE_EOC; csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT; apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1; @@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( mem += len; } sg_req->last_sg = true; - dma_desc->txd.flags = 0; + if (flags & DMA_CTRL_ACK) + dma_desc->txd.flags = DMA_CTRL_ACK; /* * Make sure that mode should not be conflicting with currently -- cgit v0.10.2 From 7b7a4efe76a8a96b20f7ac8047869f43e65b10e4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 23:05:17 -0200 Subject: iio: mxs-lradc: indexes are unsigned Fix the following warning when building with W=1 option: drivers/staging/iio/adc/mxs-lradc.c: In function 'mxs_lradc_trigger_handler': drivers/staging/iio/adc/mxs-lradc.c:244:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index fb31b45..c5ceb9d 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -239,7 +239,7 @@ static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) struct mxs_lradc *lradc = iio_priv(iio); const uint32_t chan_value = LRADC_CH_ACCUMULATE | ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - int i, j = 0; + unsigned int i, j = 0; for_each_set_bit(i, iio->active_scan_mask, iio->masklength) { lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); -- cgit v0.10.2 From a02a8c42b588059aa06dff6f614a7afcba12df69 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 9 Jan 2013 14:01:00 +0000 Subject: staging:iio:adis16080: Perform sign extension The adis16080 reports sample values in twos complement. So we need to perform a sign extension on the result, otherwise negative values will be reported incorrectly as large positive values. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 3525a68..41d7350 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -69,7 +69,7 @@ static int adis16080_spi_read(struct iio_dev *indio_dev, ret = spi_read(st->us, st->buf, 2); if (ret == 0) - *val = ((st->buf[0] & 0xF) << 8) | st->buf[1]; + *val = sign_extend32(((st->buf[0] & 0xF) << 8) | st->buf[1], 11); mutex_unlock(&st->buf_lock); return ret; -- cgit v0.10.2 From 408e9375610cca6d54e9c654cbe05a647687e12e Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 3 Jan 2013 17:55:52 +0900 Subject: f2fs: revisit the f2fs_gc flow I'd like to revisit the f2fs_gc flow and rewrite as follows. 1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's remove it. 2. Background GC marks victim blocks as dirty one at a time. 3. Foreground GC should do cleaning job until acquiring enough free sections. Afterwards, it needs to do checkpoint. Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 2807132..285e43d 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -986,7 +986,7 @@ int do_write_data_page(struct page *); int start_gc_thread(struct f2fs_sb_info *); void stop_gc_thread(struct f2fs_sb_info *); block_t start_bidx_of_node(unsigned int); -int f2fs_gc(struct f2fs_sb_info *, int); +int f2fs_gc(struct f2fs_sb_info *); void build_gc_manager(struct f2fs_sb_info *); int create_gc_caches(void); void destroy_gc_caches(void); diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index b0ec721..b4dd90c 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -78,7 +78,7 @@ static int gc_thread_func(void *data) sbi->bg_gc++; - if (f2fs_gc(sbi, 1) == GC_NONE) + if (f2fs_gc(sbi) == GC_NONE) wait_ms = GC_THREAD_NOGC_SLEEP_TIME; else if (wait_ms == GC_THREAD_NOGC_SLEEP_TIME) wait_ms = GC_THREAD_MAX_SLEEP_TIME; @@ -651,62 +651,44 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi, unsigned int segno, return ret; } -int f2fs_gc(struct f2fs_sb_info *sbi, int nGC) +int f2fs_gc(struct f2fs_sb_info *sbi) { - unsigned int segno; - int old_free_secs, cur_free_secs; - int gc_status, nfree; struct list_head ilist; + unsigned int segno, i; int gc_type = BG_GC; + int gc_status = GC_NONE; INIT_LIST_HEAD(&ilist); gc_more: - nfree = 0; - gc_status = GC_NONE; + if (!(sbi->sb->s_flags & MS_ACTIVE)) + goto stop; if (has_not_enough_free_secs(sbi)) - old_free_secs = reserved_sections(sbi); - else - old_free_secs = free_sections(sbi); - - while (sbi->sb->s_flags & MS_ACTIVE) { - int i; - if (has_not_enough_free_secs(sbi)) - gc_type = FG_GC; + gc_type = FG_GC; - cur_free_secs = free_sections(sbi) + nfree; + if (!__get_victim(sbi, &segno, gc_type, NO_CHECK_TYPE)) + goto stop; - /* We got free space successfully. */ - if (nGC < cur_free_secs - old_free_secs) - break; - - if (!__get_victim(sbi, &segno, gc_type, NO_CHECK_TYPE)) + for (i = 0; i < sbi->segs_per_sec; i++) { + /* + * do_garbage_collect will give us three gc_status: + * GC_ERROR, GC_DONE, and GC_BLOCKED. + * If GC is finished uncleanly, we have to return + * the victim to dirty segment list. + */ + gc_status = do_garbage_collect(sbi, segno + i, &ilist, gc_type); + if (gc_status != GC_DONE) break; - - for (i = 0; i < sbi->segs_per_sec; i++) { - /* - * do_garbage_collect will give us three gc_status: - * GC_ERROR, GC_DONE, and GC_BLOCKED. - * If GC is finished uncleanly, we have to return - * the victim to dirty segment list. - */ - gc_status = do_garbage_collect(sbi, segno + i, - &ilist, gc_type); - if (gc_status != GC_DONE) - goto stop; - nfree++; - } } -stop: - if (has_not_enough_free_secs(sbi) || gc_status == GC_BLOCKED) { + if (has_not_enough_free_secs(sbi)) { write_checkpoint(sbi, (gc_status == GC_BLOCKED), false); - if (nfree) + if (has_not_enough_free_secs(sbi)) goto gc_more; } +stop: mutex_unlock(&sbi->gc_mutex); put_gc_inode(&ilist); - BUG_ON(!list_empty(&ilist)); return gc_status; } diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index de62409..4b00990 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -31,7 +31,7 @@ void f2fs_balance_fs(struct f2fs_sb_info *sbi) */ if (has_not_enough_free_secs(sbi)) { mutex_lock(&sbi->gc_mutex); - f2fs_gc(sbi, 1); + f2fs_gc(sbi); } } -- cgit v0.10.2 From 4ea931e07d7708bdf42cff31e27dcc5d307ab6f7 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 8 Jan 2013 15:36:18 +0100 Subject: ARM: Kirkwood: fix ns2 gpios by converting to pinctrl Note that the pinctrl conversion also fixes GPIO support for ns2 boards. Since commit f9e75922: "ARM: Kirkwood: Make use of mvebu pincltl and gpio", the mvbu_gpio driver is used for DT boards. As mvbu_gpio relies on the pinctrl driver, then a pinctrl definition must be given to allow the GPIO configuration. Signed-off-by: Simon Guinot Acked-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785..77d21ab 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index 8821720..f4632a8 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -18,47 +18,11 @@ #include #include #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ns2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ - MPP33_GPO, /* Fan speed (bit 2) */ - 0 -}; - #define NS2_GPIO_POWER_OFF 31 static void ns2_power_off(void) @@ -71,8 +35,6 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ns2_mpp_config); - if (of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); -- cgit v0.10.2 From 9e1c96ed82562c05c89ee3eedee8d980e5c0d865 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 18 Dec 2012 01:24:29 +0100 Subject: ARM: Dove: add Cubox sdhci card detect gpio Card detect for sdhci on Cubox is connected to the wrong pin (sdio1_cd instead of sdio0_cd). With support for cd-gpios and pinctrl add the corresponding properties to DT for Cubox. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index fed7d3f..cdee96f 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; -- cgit v0.10.2 From 9b89cb8172f2ddd5a0aab74f20155036065956ac Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 2 Jan 2013 14:23:38 -0800 Subject: gpio: samsung: remove inclusion The is not needed for gpio-samsung. Cc: Linus Walleij Cc: Grant Likely Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 01f7fe9..9070f86 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -32,7 +32,6 @@ #include #include -#include #include #include -- cgit v0.10.2 From a706d965dcfdff73bf2bad1c300f8119900714c7 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Fri, 28 Dec 2012 19:56:07 -0700 Subject: perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side This patch is brought to you by the letter 'H'. Commit 20b279 breaks compatiblity with older perf binaries when run with precise modifier (:p or :pp) by requiring the exclude_guest attribute to be set. Older binaries default exclude_guest to 0 (ie., wanting guest-based samples) unless host only profiling is requested (:H modifier). The workaround for older binaries is to add H to the modifier list (e.g., -e cycles:ppH - toggles exclude_guest to 1). This was deemed unacceptable by Linus: https://lkml.org/lkml/2012/12/12/570 Between family in town and the fresh snow in Breckenridge there is no time left to be working on the proper fix for this over the holidays. In the New Year I have more pressing problems to resolve -- like some memory leaks in perf which are proving to be elusive -- although the aforementioned snow is probably why they are proving to be elusive. Either way I do not have any spare time to work on this and from the time I have managed to spend on it the solution is more difficult than just moving to a new exclude_guest flag (does not work) or flipping the logic to include_guest (which is not as trivial as one would think). So, two options: silently force exclude_guest on as suggested by Gleb which means no impact to older perf binaries or revert the original patch which caused the breakage. This patch does the latter -- reverts the original patch that introduced the regression. The problem can be revisited in the future as time allows. Signed-off-by: David Ahern Cc: Avi Kivity Cc: Gleb Natapov Cc: Ingo Molnar Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Robert Richter Link: http://lkml.kernel.org/r/1356749767-17322-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4428fd1..6774c17 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -340,9 +340,6 @@ int x86_setup_perfctr(struct perf_event *event) /* BTS is currently only allowed for user-mode. */ if (!attr->exclude_kernel) return -EOPNOTSUPP; - - if (!attr->exclude_guest) - return -EOPNOTSUPP; } hwc->config |= config; @@ -385,9 +382,6 @@ int x86_pmu_hw_config(struct perf_event *event) if (event->attr.precise_ip) { int precise = 0; - if (!event->attr.exclude_guest) - return -EOPNOTSUPP; - /* Support for constant skid */ if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) { precise++; -- cgit v0.10.2 From acb8fb04b74e1c26117b89945dc058b52b28ccb9 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 8 Jan 2013 15:08:54 +0100 Subject: perf tools: Fix building from 'make perf-*-src-pkg' tarballs Thanks (mostly) to uapi the package created from perf-*-src-pkg FTBFS: | CC perf.o |In file included from util/../perf.h:8:0, | from util/cache.h:7, | from perf.c:12: |arch/x86/include/asm/unistd.h:4:29: fatal error: uapi/asm/unistd.h: No such file or directory | | CC perf.o |In file included from util/../perf.h:106:0, | from util/cache.h:7, | from perf.c:12: |include/linux/perf_event.h:17:35: fatal error: uapi/linux/perf_event.h: No such file or directory | | CC perf.o |In file included from include/uapi/linux/perf_event.h:19:0, | from util/../perf.h:106, | from util/cache.h:7, | from perf.c:12: |util/include/asm/byteorder.h:2:49: fatal error: ../../../../include/uapi/linux/swab.h: No such file or directory | | CC perf.o |In file included from util/include/../../../../include/linux/list.h:7:0, | from util/include/linux/list.h:4, | from util/parse-events.h:7, | from perf.c:15: |util/include/linux/const.h:1:50: fatal error: ../../../../include/uapi/linux/const.h: No such file or directory | |In file included from builtin-kvm.c:26:0: |arch/x86/include/asm/svm.h:4:26: fatal error: uapi/asm/svm.h: No such file or directory | |In file included from util/evsel.c:21:0: |include/linux/hw_breakpoint.h:5:38: fatal error: uapi/linux/hw_breakpoint.h: No such file or directory | | CC util/evsel.o |In file included from util/perf_regs.h:5:0, | from util/evsel.c:23: |arch/x86/include/perf_regs.h:6:27: fatal error: asm/perf_regs.h: No such file or directory | | CC util/rbtree.o |In file included from ../../lib/rbtree.c:24:0: |util/include/linux/rbtree_augmented.h:2:56: fatal error: ../../../../include/linux/rbtree_augmented.h: No such file or directory This patch adds the missing files. Signed-off-by: Sebastian Andrzej Siewior Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1357654134-28538-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/MANIFEST b/tools/perf/MANIFEST index 80db3f4..39d4106 100644 --- a/tools/perf/MANIFEST +++ b/tools/perf/MANIFEST @@ -11,11 +11,21 @@ lib/rbtree.c include/linux/swab.h arch/*/include/asm/unistd*.h arch/*/include/asm/perf_regs.h +arch/*/include/uapi/asm/unistd*.h +arch/*/include/uapi/asm/perf_regs.h arch/*/lib/memcpy*.S arch/*/lib/memset*.S include/linux/poison.h include/linux/magic.h include/linux/hw_breakpoint.h +include/linux/rbtree_augmented.h +include/uapi/linux/perf_event.h +include/uapi/linux/const.h +include/uapi/linux/swab.h +include/uapi/linux/hw_breakpoint.h arch/x86/include/asm/svm.h arch/x86/include/asm/vmx.h arch/x86/include/asm/kvm_host.h +arch/x86/include/uapi/asm/svm.h +arch/x86/include/uapi/asm/vmx.h +arch/x86/include/uapi/asm/kvm.h -- cgit v0.10.2 From 11d5993df2e1f65e3acfeb92a3febe88803b3e7f Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 10 Jan 2013 13:15:14 +0100 Subject: arm: mvebu: Fix memory size for Armada 370 DB Actually the Armada 370 DB (aka DB-88F6710-BP-DDR3) come with 1GB and not 512MB. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 0004402..9b82fac 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { -- cgit v0.10.2 From a4a12e008e292a81d312659529b71be2026ab355 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 30 Nov 2012 11:56:05 +0000 Subject: ARM: virt: Avoid bx instruction for compatibility with <=ARMv4 Non-T variants of ARMv4 do not support the bx instruction. However, __hyp_stub_install is always called from the same instruction set used to build the bulk of the kernel, so bx should not be necessary. This patch uses the traditional "mov pc" instead of bx. Cc: Signed-off-by: Dave Martin [will: fixed up remaining bx instruction] Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 65b2417..3c60256 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - bxne lr + movne pc, lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - bxne lr @ give up if the CPU is not in HYP mode + movne pc, lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -200,7 +200,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - bx lr + mov pc, lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE -- cgit v0.10.2 From 6e484be1ccca3ea495db45900fd42aac8d49d754 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 4 Jan 2013 17:44:14 +0000 Subject: ARM: virt: boot secondary CPUs through the right entry point Secondary CPUs should use the __hyp_stub_install_secondary entry point, so boot mode inconsistencies can be detected. Cc: Acked-by: Dave Martin Reported-by: Ian Molton Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4eee351..16abc83 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -331,7 +331,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ #ifdef CONFIG_ARM_VIRT_EXT - bl __hyp_stub_install + bl __hyp_stub_install_secondary #endif safe_svcmode_maskall r9 -- cgit v0.10.2 From d01723479e6a6c70c83295f7847477a016d5e14a Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 4 Jan 2013 17:44:15 +0000 Subject: ARM: virt: simplify __hyp_stub_install epilog __hyp_stub_install duplicates quite a bit of safe_svcmode_maskall by forcing the CPU back to SVC. This is unnecessary, as safe_svcmode_maskall is called just after. Furthermore, the way we build SPSR_hyp is buggy as we fail to mask the interrupts, leading to interesting behaviours on TC2 + UEFI. The fix is to simply remove this code and rely on safe_svcmode_maskall to do the right thing. Cc: Reviewed-by: Dave Martin Reported-by: Harry Liebel Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 3c60256..1315c4c 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary) * Eventually, CPU-specific code might be needed -- assume not for now * * This code relies on the "eret" instruction to synchronize the - * various coprocessor accesses. + * various coprocessor accesses. This is done when we switch to SVC + * (see safe_svcmode_maskall). */ @ Now install the hypervisor stub: adr r7, __hyp_stub_vectors @@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 1: #endif - bic r7, r4, #MODE_MASK - orr r7, r7, #SVC_MODE -THUMB( orr r7, r7, #PSR_T_BIT ) - msr spsr_cxsf, r7 @ This is SPSR_hyp. - - __MSR_ELR_HYP(14) @ msr elr_hyp, lr - __ERET @ return, switching to SVC mode - @ The boot CPU mode is left in r4. + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: -- cgit v0.10.2 From 7d82db83165dbac8c3f6d47b73c84f38e3996e30 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 11 Jan 2013 13:10:49 +0900 Subject: f2fs: add f2fs_balance_fs in several interfaces The f2fs_balance_fs() is to check the number of free sections and decide whether it needs to conduct cleaning or not. If there are not enough free sections, the cleaning job should be started. In order to control an amount of free sections even under high utilization, f2fs should call f2fs_balance_fs at all the VFS interfaces that are able to produce dirty pages. This patch adds the function calls in the missing interfaces as follows. 1. f2fs_setxattr() The f2fs_setxattr() produces dirty node pages so that we should call f2fs_balance_fs() either likewise doing in other VFS interfaces such as f2fs_lookup(), f2fs_mkdir(), and so on. 2. f2fs_sync_file() We should guarantee serving free sections for syncing metadata during fsync. Previously, there is no space check before triggering checkpoint and sync_node_pages. Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization, f2fs is able to be faced with no free sections, resulting in BUG_ON(). 3. f2fs_sync_fs() Before calling write_checkpoint(), we should guarantee that there are minimum free sections. 4. f2fs_write_inode() f2fs_write_inode() is also able to produce dirty node pages. Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 88593c5..7354c2d 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -137,6 +137,9 @@ int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) if (ret) return ret; + /* guarantee free sections for fsync */ + f2fs_balance_fs(sbi); + mutex_lock(&inode->i_mutex); if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index bf20b4d..7942417 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -217,6 +217,9 @@ int f2fs_write_inode(struct inode *inode, struct writeback_control *wbc) inode->i_ino == F2FS_META_INO(sbi)) return 0; + if (wbc) + f2fs_balance_fs(sbi); + node_page = get_node_page(sbi, inode->i_ino); if (IS_ERR(node_page)) return PTR_ERR(node_page); diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index afa7ef0..0f2b2eb 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -137,6 +137,8 @@ int f2fs_sync_fs(struct super_block *sb, int sync) if (sync) write_checkpoint(sbi, false, false); + else + f2fs_balance_fs(sbi); return 0; } diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c index 940136a..8038c04 100644 --- a/fs/f2fs/xattr.c +++ b/fs/f2fs/xattr.c @@ -318,6 +318,8 @@ int f2fs_setxattr(struct inode *inode, int name_index, const char *name, if (name_len > 255 || value_len > MAX_VALUE_LEN) return -ERANGE; + f2fs_balance_fs(sbi); + mutex_lock_op(sbi, NODE_NEW); if (!fi->i_xattr_nid) { /* Allocate new attribute block */ -- cgit v0.10.2 From 9eaeba701386037cdd2ccd8bf8650feb2e2cec31 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 11 Jan 2013 14:09:38 +0900 Subject: f2fs: move f2fs_balance_fs to punch_hole The f2fs_fallocate() has two operations: punch_hole and expand_size. Only in the case of punch_hole, dirty node pages can be produced, so let's trigger f2fs_balance_fs() in this case only. Furthermore, let's trigger it at every data truncation routine. Signed-off-by: Namjae Jeon Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 7354c2d..819de7f 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -410,6 +410,8 @@ int truncate_hole(struct inode *inode, pgoff_t pg_start, pgoff_t pg_end) struct dnode_of_data dn; struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); + f2fs_balance_fs(sbi); + mutex_lock_op(sbi, DATA_TRUNC); set_new_dnode(&dn, inode, NULL, NULL, 0); err = get_dnode_of_data(&dn, index, RDONLY_NODE); @@ -537,7 +539,6 @@ static long f2fs_fallocate(struct file *file, int mode, loff_t offset, loff_t len) { struct inode *inode = file->f_path.dentry->d_inode; - struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb); long ret; if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE)) @@ -552,8 +553,6 @@ static long f2fs_fallocate(struct file *file, int mode, inode->i_mtime = inode->i_ctime = CURRENT_TIME; mark_inode_dirty(inode); } - - f2fs_balance_fs(sbi); return ret; } -- cgit v0.10.2 From aec99b7bda06436cd95229fe4841aeef29112e11 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Jan 2013 22:08:27 +0800 Subject: ARM: imx: fix build error with !CONFIG_SMP Commit 68b2532 (ARM: imx: select HAVE_IMX_SRC when SMP is enabled) introduces a build error with imx_v6_v7_defconfig when CONFIG_SMP is deselected. LINK vmlinux LD vmlinux.o MODPOST vmlinux.o GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o arch/arm/mach-imx/built-in.o: In function `imx6q_restart': platform-ahci-imx.c:(.text+0x448c): undefined reference to `imx_src_prepare_restart' arch/arm/mach-imx/built-in.o: In function `imx6q_pm_enter': platform-ahci-imx.c:(.text+0x4544): undefined reference to `imx_set_cpu_jump' arch/arm/mach-imx/built-in.o: In function `imx6q_init_irq': platform-ahci-imx.c:(.init.text+0xbef0): undefined reference to `imx_src_init' make[1]: *** [vmlinux] Error 1 While the commit adds 'def_bool y if SMP' for HAVE_IMX_SRC, it should not remove 'select HAVE_IMX_SRC' from SOC_IMX6Q, as the IMX6Q UP build also needs HAVE_IMX_SRC. Add the HAVE_IMX_SRC select back for SOC_IMX6Q to fix above build error. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 1ad0d76..8e2f292 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -853,6 +853,7 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC + select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL -- cgit v0.10.2 From 9bf42300e672fb1b5587d1da5486f8b144e74598 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 28 Aug 2012 18:38:58 -0300 Subject: [media] uvcvideo: Return -EACCES when trying to set a read-only control Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") also reverted part of commit 30ecb936cbcd83e3735625ac63e1b4466546f5fe ("uvcvideo: Return -EACCES when trying to access a read/write-only control") by mistake. Fix it. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index 2bb7613..d5baab1 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -1431,8 +1431,10 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, int ret; ctrl = uvc_find_control(chain, xctrl->id, &mapping); - if (ctrl == NULL || (ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR) == 0) + if (ctrl == NULL) return -EINVAL; + if (!(ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR)) + return -EACCES; /* Clamp out of range values. */ switch (mapping->v4l2_type) { -- cgit v0.10.2 From 29005c09f41d459c458eb8761a54703b56afb16a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:32:04 -0300 Subject: [media] uvcvideo: Cleanup leftovers of partial revert Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") missed two modifications. Clean them up. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index f2ee8c6..5eb8989 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -657,8 +657,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_get(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = ret == -ENOENT - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } @@ -686,9 +685,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = (ret == -ENOENT && - cmd == VIDIOC_S_EXT_CTRLS) - ? ctrls->count : i; + ctrls->error_idx = i; return ret; } } -- cgit v0.10.2 From 68d6f84ba0c47e658beff3a4bf0c43acee4b4690 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 11 Jan 2013 09:42:00 -0300 Subject: [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures The uvc_set_ctrl() calls don't write to the hardware. A failure at that point thus leaves the device in a clean state, with no control modified. Set the error_idx field to the count value to reflect that, as per the V4L2 specification. TRY_EXT_CTRLS is unchanged and the error_idx field must always be set to the failed control index in that case. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 5eb8989..68d59b5 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -685,7 +685,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) ret = uvc_ctrl_set(chain, ctrl); if (ret < 0) { uvc_ctrl_rollback(handle); - ctrls->error_idx = i; + ctrls->error_idx = cmd == VIDIOC_S_EXT_CTRLS + ? ctrls->count : i; return ret; } } -- cgit v0.10.2 From 30d4b180e20c081f435143f8bc211c66a930608a Mon Sep 17 00:00:00 2001 From: Tamas Lengyel Date: Mon, 31 Dec 2012 15:44:30 -0500 Subject: xen/privcmd: Relax access control in privcmd_ioctl_mmap In the privcmd Linux driver two checks in the functions privcmd_ioctl_mmap and privcmd_ioctl_mmap_batch are not needed as they are trying to enforce hypervisor-level access control. They should be removed as they break secondary control domains when performing dom0 disaggregation. Xen itself provides adequate security controls around these hypercalls and these checks prevent those controls from functioning as intended. Signed-off-by: Tamas K Lengyel Cc: Daniel De Graaf [v1: Fixed up the patch and commit description] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index b9d0898..f631612 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -199,9 +199,6 @@ static long privcmd_ioctl_mmap(void __user *udata) LIST_HEAD(pagelist); struct mmap_mfn_state state; - if (!xen_initial_domain()) - return -EPERM; - /* We only support privcmd_ioctl_mmap_batch for auto translated. */ if (xen_feature(XENFEAT_auto_translated_physmap)) return -ENOSYS; @@ -360,9 +357,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) int *err_array = NULL; struct mmap_batch_state state; - if (!xen_initial_domain()) - return -EPERM; - switch (version) { case 1: if (copy_from_user(&m, udata, sizeof(struct privcmd_mmapbatch))) -- cgit v0.10.2 From 67c6b2ef2662b17cc2174f2bdc22a7cb818a8376 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Jan 2013 10:18:49 +0100 Subject: ARM: integrator: move syscon remap for AP PCIv3 The Integrator/AP syscon remapping was done in the .setup() function rather than .preinit() which is wrong - .preinit() is called before .setup() and the former also use the syscon base and cause a crash since it was not yet remapped. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index be50e79..e7fcea7 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + if (!ap_syscon_base) + return -EINVAL; + if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) - return -EINVAL; } return ret; @@ -497,6 +496,13 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + pr_err("unable to remap the AP syscon for PCIv3\n"); + return; + } + pcibios_min_mem = 0x00100000; /* -- cgit v0.10.2 From 72533b77d30c2be02672e26b5dde1263d7b4c2be Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Jan 2013 12:05:31 -0800 Subject: arm: mvebu: Fix compile for multiplatform when ARMv6 is selected Some systems compile in both ARMv6 and ARMv7 into multiplatform configurations. This means the default compiler flags are for ARMv6, and we will get: arch/arm/mach-mvebu/coherency_ll.S: Assembler messages: arch/arm/mach-mvebu/coherency_ll.S:45: Error: selected processor does not support `dsb' Fix this by specifying ARMv7 flags for coherency_ll.o. Signed-off-by: Tony Lindgren Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 5dcb369..99df4df 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,6 +1,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include +AFLAGS_coherency_ll.o := -Wa,-march=armv7-a + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -- cgit v0.10.2 From 0d21b0e3477395e7ff2acc269f15df6e6a8d356d Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 12 Jan 2013 11:38:44 +1030 Subject: module: add new state MODULE_STATE_UNFORMED. You should never look at such a module, so it's excised from all paths which traverse the modules list. We add the state at the end, to avoid gratuitous ABI break (ksplice). Signed-off-by: Rusty Russell diff --git a/include/linux/module.h b/include/linux/module.h index 7760c6d..1375ee3 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -199,11 +199,11 @@ struct module_use { struct module *source, *target; }; -enum module_state -{ - MODULE_STATE_LIVE, - MODULE_STATE_COMING, - MODULE_STATE_GOING, +enum module_state { + MODULE_STATE_LIVE, /* Normal state. */ + MODULE_STATE_COMING, /* Full formed, running module_init. */ + MODULE_STATE_GOING, /* Going away. */ + MODULE_STATE_UNFORMED, /* Still setting it up. */ }; /** diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 4d5f8d5..8875254 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1970,6 +1970,8 @@ static int kdb_lsmod(int argc, const char **argv) kdb_printf("Module Size modstruct Used by\n"); list_for_each_entry(mod, kdb_modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; kdb_printf("%-20s%8u 0x%p ", mod->name, mod->core_size, (void *)mod); diff --git a/kernel/module.c b/kernel/module.c index 41bc118..c3a2ee8 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -188,6 +188,7 @@ struct load_info { ongoing or failed initialization etc. */ static inline int strong_try_module_get(struct module *mod) { + BUG_ON(mod && mod->state == MODULE_STATE_UNFORMED); if (mod && mod->state == MODULE_STATE_COMING) return -EBUSY; if (try_module_get(mod)) @@ -343,6 +344,9 @@ bool each_symbol_section(bool (*fn)(const struct symsearch *arr, #endif }; + if (mod->state == MODULE_STATE_UNFORMED) + continue; + if (each_symbol_in_section(arr, ARRAY_SIZE(arr), mod, fn, data)) return true; } @@ -450,16 +454,24 @@ const struct kernel_symbol *find_symbol(const char *name, EXPORT_SYMBOL_GPL(find_symbol); /* Search for module by name: must hold module_mutex. */ -struct module *find_module(const char *name) +static struct module *find_module_all(const char *name, + bool even_unformed) { struct module *mod; list_for_each_entry(mod, &modules, list) { + if (!even_unformed && mod->state == MODULE_STATE_UNFORMED) + continue; if (strcmp(mod->name, name) == 0) return mod; } return NULL; } + +struct module *find_module(const char *name) +{ + return find_module_all(name, false); +} EXPORT_SYMBOL_GPL(find_module); #ifdef CONFIG_SMP @@ -525,6 +537,8 @@ bool is_module_percpu_address(unsigned long addr) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (!mod->percpu_size) continue; for_each_possible_cpu(cpu) { @@ -1048,6 +1062,8 @@ static ssize_t show_initstate(struct module_attribute *mattr, case MODULE_STATE_GOING: state = "going"; break; + default: + BUG(); } return sprintf(buffer, "%s\n", state); } @@ -1786,6 +1802,8 @@ void set_all_modules_text_rw(void) mutex_lock(&module_mutex); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((mod->module_core) && (mod->core_text_size)) { set_page_attributes(mod->module_core, mod->module_core + mod->core_text_size, @@ -1807,6 +1825,8 @@ void set_all_modules_text_ro(void) mutex_lock(&module_mutex); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((mod->module_core) && (mod->core_text_size)) { set_page_attributes(mod->module_core, mod->module_core + mod->core_text_size, @@ -2998,7 +3018,8 @@ static bool finished_loading(const char *name) mutex_lock(&module_mutex); mod = find_module(name); - ret = !mod || mod->state != MODULE_STATE_COMING; + ret = !mod || mod->state == MODULE_STATE_LIVE + || mod->state == MODULE_STATE_GOING; mutex_unlock(&module_mutex); return ret; @@ -3361,6 +3382,8 @@ const char *module_address_lookup(unsigned long addr, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { if (modname) @@ -3384,6 +3407,8 @@ int lookup_module_symbol_name(unsigned long addr, char *symname) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { const char *sym; @@ -3408,6 +3433,8 @@ int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_init(addr, mod) || within_module_core(addr, mod)) { const char *sym; @@ -3435,6 +3462,8 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type, preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (symnum < mod->num_symtab) { *value = mod->symtab[symnum].st_value; *type = mod->symtab[symnum].st_info; @@ -3477,9 +3506,12 @@ unsigned long module_kallsyms_lookup_name(const char *name) ret = mod_find_symname(mod, colon+1); *colon = ':'; } else { - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if ((ret = mod_find_symname(mod, name)) != 0) break; + } } preempt_enable(); return ret; @@ -3494,6 +3526,8 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *, int ret; list_for_each_entry(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; for (i = 0; i < mod->num_symtab; i++) { ret = fn(data, mod->strtab + mod->symtab[i].st_name, mod, mod->symtab[i].st_value); @@ -3509,6 +3543,7 @@ static char *module_flags(struct module *mod, char *buf) { int bx = 0; + BUG_ON(mod->state == MODULE_STATE_UNFORMED); if (mod->taints || mod->state == MODULE_STATE_GOING || mod->state == MODULE_STATE_COMING) { @@ -3550,6 +3585,10 @@ static int m_show(struct seq_file *m, void *p) struct module *mod = list_entry(p, struct module, list); char buf[8]; + /* We always ignore unformed modules. */ + if (mod->state == MODULE_STATE_UNFORMED) + return 0; + seq_printf(m, "%s %u", mod->name, mod->init_size + mod->core_size); print_unload_info(m, mod); @@ -3610,6 +3649,8 @@ const struct exception_table_entry *search_module_extables(unsigned long addr) preempt_disable(); list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (mod->num_exentries == 0) continue; @@ -3658,10 +3699,13 @@ struct module *__module_address(unsigned long addr) if (addr < module_addr_min || addr > module_addr_max) return NULL; - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; if (within_module_core(addr, mod) || within_module_init(addr, mod)) return mod; + } return NULL; } EXPORT_SYMBOL_GPL(__module_address); @@ -3714,8 +3758,11 @@ void print_modules(void) printk(KERN_DEFAULT "Modules linked in:"); /* Most callers should already have preempt disabled, but make sure */ preempt_disable(); - list_for_each_entry_rcu(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) { + if (mod->state == MODULE_STATE_UNFORMED) + continue; printk(" %s%s", mod->name, module_flags(mod, buf)); + } preempt_enable(); if (last_unloaded_module[0]) printk(" [last unloaded: %s]", last_unloaded_module); -- cgit v0.10.2 From 1fb9341ac34825aa40354e74d9a2c69df7d2c304 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 12 Jan 2013 13:27:34 +1030 Subject: module: put modules in list much earlier. Prarit's excellent bug report: > In recent Fedora releases (F17 & F18) some users have reported seeing > messages similar to > > [ 15.478160] kvm: Could not allocate 304 bytes percpu data > [ 15.478174] PERCPU: allocation failed, size=304 align=32, alloc from > reserved chunk failed > > during system boot. In some cases, users have also reported seeing this > message along with a failed load of other modules. > > What is happening is systemd is loading an instance of the kvm module for > each cpu found (see commit e9bda3b). When the module load occurs the kernel > currently allocates the modules percpu data area prior to checking to see > if the module is already loaded or is in the process of being loaded. If > the module is already loaded, or finishes load, the module loading code > releases the current instance's module's percpu data. Now we have a new state MODULE_STATE_UNFORMED, we can insert the module into the list (and thus guarantee its uniqueness) before we allocate the per-cpu region. Reported-by: Prarit Bhargava Signed-off-by: Rusty Russell Tested-by: Prarit Bhargava diff --git a/kernel/module.c b/kernel/module.c index c3a2ee8..ec535aa 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3017,7 +3017,7 @@ static bool finished_loading(const char *name) bool ret; mutex_lock(&module_mutex); - mod = find_module(name); + mod = find_module_all(name, true); ret = !mod || mod->state == MODULE_STATE_LIVE || mod->state == MODULE_STATE_GOING; mutex_unlock(&module_mutex); @@ -3141,6 +3141,32 @@ static int load_module(struct load_info *info, const char __user *uargs, goto free_copy; } + /* + * We try to place it in the list now to make sure it's unique + * before we dedicate too many resources. In particular, + * temporary percpu memory exhaustion. + */ + mod->state = MODULE_STATE_UNFORMED; +again: + mutex_lock(&module_mutex); + if ((old = find_module_all(mod->name, true)) != NULL) { + if (old->state == MODULE_STATE_COMING + || old->state == MODULE_STATE_UNFORMED) { + /* Wait in case it fails to load. */ + mutex_unlock(&module_mutex); + err = wait_event_interruptible(module_wq, + finished_loading(mod->name)); + if (err) + goto free_module; + goto again; + } + err = -EEXIST; + mutex_unlock(&module_mutex); + goto free_module; + } + list_add_rcu(&mod->list, &modules); + mutex_unlock(&module_mutex); + #ifdef CONFIG_MODULE_SIG mod->sig_ok = info->sig_ok; if (!mod->sig_ok) @@ -3150,7 +3176,7 @@ static int load_module(struct load_info *info, const char __user *uargs, /* Now module is in final location, initialize linked lists, etc. */ err = module_unload_init(mod); if (err) - goto free_module; + goto unlink_mod; /* Now we've got everything in the final locations, we can * find optional sections. */ @@ -3185,54 +3211,33 @@ static int load_module(struct load_info *info, const char __user *uargs, goto free_arch_cleanup; } - /* Mark state as coming so strong_try_module_get() ignores us. */ - mod->state = MODULE_STATE_COMING; - - /* Now sew it into the lists so we can get lockdep and oops - * info during argument parsing. No one should access us, since - * strong_try_module_get() will fail. - * lockdep/oops can run asynchronous, so use the RCU list insertion - * function to insert in a way safe to concurrent readers. - * The mutex protects against concurrent writers. - */ -again: - mutex_lock(&module_mutex); - if ((old = find_module(mod->name)) != NULL) { - if (old->state == MODULE_STATE_COMING) { - /* Wait in case it fails to load. */ - mutex_unlock(&module_mutex); - err = wait_event_interruptible(module_wq, - finished_loading(mod->name)); - if (err) - goto free_arch_cleanup; - goto again; - } - err = -EEXIST; - goto unlock; - } - - /* This has to be done once we're sure module name is unique. */ dynamic_debug_setup(info->debug, info->num_debug); - /* Find duplicate symbols */ + mutex_lock(&module_mutex); + /* Find duplicate symbols (must be called under lock). */ err = verify_export_symbols(mod); if (err < 0) - goto ddebug; + goto ddebug_cleanup; + /* This relies on module_mutex for list integrity. */ module_bug_finalize(info->hdr, info->sechdrs, mod); - list_add_rcu(&mod->list, &modules); + + /* Mark state as coming so strong_try_module_get() ignores us, + * but kallsyms etc. can see us. */ + mod->state = MODULE_STATE_COMING; + mutex_unlock(&module_mutex); /* Module is ready to execute: parsing args may do that. */ err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, -32768, 32767, &ddebug_dyndbg_module_param_cb); if (err < 0) - goto unlink; + goto bug_cleanup; /* Link in to syfs. */ err = mod_sysfs_setup(mod, info, mod->kp, mod->num_kp); if (err < 0) - goto unlink; + goto bug_cleanup; /* Get rid of temporary copy. */ free_copy(info); @@ -3242,16 +3247,13 @@ again: return do_init_module(mod); - unlink: + bug_cleanup: + /* module_bug_cleanup needs module_mutex protection */ mutex_lock(&module_mutex); - /* Unlink carefully: kallsyms could be walking list. */ - list_del_rcu(&mod->list); module_bug_cleanup(mod); - wake_up_all(&module_wq); - ddebug: - dynamic_debug_remove(info->debug); - unlock: mutex_unlock(&module_mutex); + ddebug_cleanup: + dynamic_debug_remove(info->debug); synchronize_sched(); kfree(mod->args); free_arch_cleanup: @@ -3260,6 +3262,12 @@ again: free_modinfo(mod); free_unload: module_unload_free(mod); + unlink_mod: + mutex_lock(&module_mutex); + /* Unlink carefully: kallsyms could be walking list. */ + list_del_rcu(&mod->list); + wake_up_all(&module_wq); + mutex_unlock(&module_mutex); free_module: module_deallocate(mod, info); free_copy: diff --git a/lib/bug.c b/lib/bug.c index a28c141..d0cdf14 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -55,6 +55,7 @@ static inline unsigned long bug_addr(const struct bug_entry *bug) } #ifdef CONFIG_MODULES +/* Updates are protected by module mutex */ static LIST_HEAD(module_bug_list); static const struct bug_entry *module_find_bug(unsigned long bugaddr) -- cgit v0.10.2 From c2be6f93b383c873a4f9d521afa49b1b67d06085 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Fri, 11 Jan 2013 10:15:54 +0800 Subject: PCI: pciehp: Use per-slot workqueues to avoid deadlock When we have a hotplug-capable PCIe port with a second hotplug-capable PCIe port below it, removing the device below the upstream port causes a deadlock. The deadlock happens because we use the pciehp_wq workqueue to run pciehp_power_thread(), which uses pciehp_disable_slot() to remove devices below the upstream port. When we remove the downstream PCIe port, we call pciehp_remove(), the pciehp driver's .remove() method. That calls flush_workqueue(pciehp_wq), which deadlocks because the pciehp_power_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every PCIe port and removing the single shared workqueue. Here's the call path that leads to the deadlock: pciehp_queue_pushbutton_work queue_work(pciehp_wq) # queue pciehp_power_thread ... pciehp_power_thread pciehp_disable_slot remove_board pciehp_unconfigure_device pci_stop_and_remove_bus_device ... pciehp_remove # pciehp driver .remove method pciehp_release_ctrl pcie_cleanup_slot flush_workqueue(pciehp_wq) This is fairly urgent because it can be caused by simply unplugging a Thunderbolt adapter, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2ssiRgcTD1bej2tkUUfsWmpL5eNtPcNif9va2-Gzb2u8nQ@mail.gmail.com Reported-and-tested-by: Daniel J Blueman Reviewed-by: Kenji Kaneshige Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 26ffd3e..2c113de 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -44,7 +44,6 @@ extern bool pciehp_poll_mode; extern int pciehp_poll_time; extern bool pciehp_debug; extern bool pciehp_force; -extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ do { \ @@ -78,6 +77,7 @@ struct slot { struct hotplug_slot *hotplug_slot; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; }; struct event_info { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 916bf4f..939bd1d 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -42,7 +42,6 @@ bool pciehp_debug; bool pciehp_poll_mode; int pciehp_poll_time; bool pciehp_force; -struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -340,18 +339,13 @@ static int __init pcied_init(void) { int retval = 0; - pciehp_wq = alloc_workqueue("pciehp", 0, 0); - if (!pciehp_wq) - return -ENOMEM; - pciehp_firmware_init(); retval = pcie_port_service_register(&hpdriver_portdrv); dbg("pcie_port_service_register = %d\n", retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(pciehp_wq); + if (retval) dbg("Failure to register service\n"); - } + return retval; } @@ -359,7 +353,6 @@ static void __exit pcied_cleanup(void) { dbg("unload_pciehpd()\n"); pcie_port_service_unregister(&hpdriver_portdrv); - destroy_workqueue(pciehp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 27f4429..38f0186 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -49,7 +49,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -344,7 +344,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -377,7 +377,7 @@ static void handle_button_press_event(struct slot *p_slot) if (ATTN_LED(ctrl)) pciehp_set_attention_status(p_slot, 0); - queue_delayed_work(pciehp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: @@ -439,7 +439,7 @@ static void handle_surprise_event(struct slot *p_slot) else p_slot->state = POWERON_STATE; - queue_work(pciehp_wq, &info->work); + queue_work(p_slot->wq, &info->work); } static void interrupt_event_handler(struct work_struct *work) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 13b2eaf..5127f3f 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -773,23 +773,32 @@ static void pcie_shutdown_notification(struct controller *ctrl) static int pcie_init_slot(struct controller *ctrl) { struct slot *slot; + char name[32]; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) return -ENOMEM; + snprintf(name, sizeof(name), "pciehp-%u", PSN(ctrl)); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) + goto abort; + slot->ctrl = ctrl; mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); ctrl->slot = slot; return 0; +abort: + kfree(slot); + return -ENOMEM; } static void pcie_cleanup_slot(struct controller *ctrl) { struct slot *slot = ctrl->slot; cancel_delayed_work(&slot->work); - flush_workqueue(pciehp_wq); + destroy_workqueue(slot->wq); kfree(slot); } -- cgit v0.10.2 From a82b6af37d20bfe6e99a4d890f1cf1d89059929f Mon Sep 17 00:00:00 2001 From: Betty Dall Date: Sun, 13 Jan 2013 15:46:18 -0700 Subject: PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() The function aer_recover_queue() calls pci_get_domain_bus_and_slot(), which requires that the caller decrement the reference count with pci_dev_put(). This patch adds the missing call to pci_dev_put(). Signed-off-by: Betty Dall Signed-off-by: Bjorn Helgaas Reviewed-by: Shuah Khan CC: stable@vger.kernel.org diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 421bbc5..564d97f 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -630,6 +630,7 @@ static void aer_recover_work_func(struct work_struct *work) continue; } do_recovery(pdev, entry.severity); + pci_dev_put(pdev); } } #endif -- cgit v0.10.2 From 10959d72d401cec2781ca636b07d692c625e1c91 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 15:30:52 -0700 Subject: PCI: shpchp: Make shpchp_wq non-ordered e24dcbef93 ("shpchp: update workqueue usage") was described as adding non-ordered shpchp_wq, but it actually made it an *ordered* workqueue. This patch changes shpchp_wq to be non-ordered, as described in the e24dcbef93 commit log and as was done for pciehp by a827ea307b ("pciehp: update workqueue usage"). Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index b6de307..59ca86c 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -366,7 +366,7 @@ static int __init shpcd_init(void) { int retval = 0; - shpchp_wq = alloc_ordered_workqueue("shpchp", 0); + shpchp_wq = alloc_workqueue("shpchp", 0, 0); if (!shpchp_wq) return -ENOMEM; -- cgit v0.10.2 From 006e792ba5f60c59d8bc5ac5628c54e021e8580f Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sun, 13 Jan 2013 16:56:42 +0100 Subject: ARM: imx: platform-imx-fb: modifies platform device name Framebuffer platform device is now identified by a device id (imx1-fb or imx21-fb) instead of by driver name (imx-fb). Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 10b0ed3..25a47c6 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("imx-fb", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } -- cgit v0.10.2 From afc10301f70350b490ca518ceb793928854b5453 Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sun, 13 Jan 2013 16:56:43 +0100 Subject: video: imxfb: fix imxfb_info configuration order The devtype field for fbi (struct imxfb_info) must be set after memset call to avoid some wrong behaviour (pixel size). Signed-off-by: Gwenhael Goavec-Merou Signed-off-by: Shawn Guo diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index e501dbc..8435c5d 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -729,6 +729,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev) memset(fbi, 0, sizeof(struct imxfb_info)); + fbi->devtype = pdev->id_entry->driver_data; + strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); info->fix.type = FB_TYPE_PACKED_PIXELS; @@ -789,7 +791,6 @@ static int __init imxfb_probe(struct platform_device *pdev) return -ENOMEM; fbi = info->par; - fbi->devtype = pdev->id_entry->driver_data; if (!fb_mode) fb_mode = pdata->mode[0].mode.name; -- cgit v0.10.2 From ff9234ad4e974768455071c91bd76402e4af8a28 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jan 2013 14:41:13 +0900 Subject: f2fs: remove redundant call to set_blocksize in f2fs_fill_super Since, f2fs supports only 4KB blocksize, which is set at the beginning in f2fs_fill_super. So, we do not need to again check this blocksize setting in such case. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 0f2b2eb..ac127fd 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -443,7 +443,7 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) if (!sbi) return -ENOMEM; - /* set a temporary block size */ + /* set a block size */ if (!sb_set_blocksize(sb, F2FS_BLKSIZE)) { f2fs_msg(sb, KERN_ERR, "unable to set blocksize"); goto free_sbi; @@ -542,10 +542,6 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent) INIT_LIST_HEAD(&sbi->dir_inode_list); spin_lock_init(&sbi->dir_inode_lock); - /* init super block */ - if (!sb_set_blocksize(sb, sbi->blocksize)) - goto free_cp; - init_orphan_info(sbi); /* setup f2fs internal modules */ -- cgit v0.10.2 From 163799872b65b0cbf0091d82971233cc3d2425d3 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Sat, 12 Jan 2013 14:41:33 +0900 Subject: f2fs: avoid redundant time update for parent directory in f2fs_delete_entry In call to f2fs_delete_entry, 'dir' time modification code is put at two places. So, remove the redundant code for timing update. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index 951ed52..989980e 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -503,7 +503,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page, } if (inode) { - inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME; + inode->i_ctime = CURRENT_TIME; drop_nlink(inode); if (S_ISDIR(inode->i_mode)) { drop_nlink(inode); -- cgit v0.10.2 From 837576642167d701f983e4def0d3936b514a28ae Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 14 Jan 2013 14:08:50 +0800 Subject: ARM: imx: disable cpu in .cpu_kill hook It's buggy to disable the cpu that is being hot-unplugged in .cpu_die hook which runs on the cpu itself. Instead, it should be done in .cpu_kill which runs on the thread (another cpu) that asks for shutting down the cpu. Move imx_enable_cpu(cpu, false) call into .cpu_kill hook, and leave the cpu to be hot-unplugged in WFI within .cpu_die, so that we can get a more stable cpu hot-plug operation. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 7191ab4..fa36fb8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); +extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3dec962..7bc5fe1 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - imx_enable_cpu(cpu, false); + cpu_do_idle(); +} - /* spin here until hardware takes it down */ - while (1) - ; +int imx_cpu_kill(unsigned int cpu) +{ + imx_enable_cpu(cpu, false); + return 1; } diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 3777b80..66fae88 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, #endif }; -- cgit v0.10.2 From 83ae20981ae924c37d02a42c829155fc3851260c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 14 Jan 2013 21:11:10 +0800 Subject: ARM: imx: correct low-power mode setting The hardware reset value of bit CCM_CLPCR_LPM enables WAIT mode (WAIT_UNCLOCKED) by default. However this is undesirable because WAIT mode should only be enabled when there is a driver managing ARM clock gating. Correct the initial power mode to WAIT_CLOCKED (disable WAIT mode). While at it, the power mode after resuming is also set back to WAIT_CLOCKED from STOP_POWER_OFF. Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7f2c10c..c0c4e72 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index a17543d..ee42d20 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state) cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); imx_gpc_post_resume(); + imx6q_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; -- cgit v0.10.2 From d347e75847c1fb299c97736638f45e6ea39702d4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:07:22 -0700 Subject: PCI: shpchp: Handle push button event asynchronously Use non-ordered workqueue for attention button events. Attention button events on each slot can be handled asynchronously. So we should use non-ordered workqueue. This patch also removes ordered workqueue in shpchp as a result. 486b10b9f4 ("PCI: pciehp: Handle push button event asynchronously") made the same change to pciehp. I split this out from a patch by Yijing Wang so we fix one thing at a time and to make the shpchp history correspond more closely with the pciehp history. Signed-off-by: Bjorn Helgaas CC: Kenji Kaneshige diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index ca64932..1b69d95 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -47,7 +47,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; extern struct workqueue_struct *shpchp_wq; -extern struct workqueue_struct *shpchp_ordered_wq; #define dbg(format, arg...) \ do { \ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 59ca86c..3774e0d 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -40,7 +40,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; struct workqueue_struct *shpchp_wq; -struct workqueue_struct *shpchp_ordered_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -181,7 +180,6 @@ void cleanup_slots(struct controller *ctrl) list_del(&slot->slot_list); cancel_delayed_work(&slot->work); flush_workqueue(shpchp_wq); - flush_workqueue(shpchp_ordered_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -370,17 +368,10 @@ static int __init shpcd_init(void) if (!shpchp_wq) return -ENOMEM; - shpchp_ordered_wq = alloc_ordered_workqueue("shpchp_ordered", 0); - if (!shpchp_ordered_wq) { - destroy_workqueue(shpchp_wq); - return -ENOMEM; - } - retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); if (retval) { - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); } return retval; @@ -390,7 +381,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_ordered_wq); destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index f9b5a52..fd2cae9 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_ordered_wq, &info->work); + queue_work(shpchp_wq, &info->work); out: mutex_unlock(&p_slot->lock); } -- cgit v0.10.2 From f652e7d2916fe2fcf9e7d709aa5b7476b431e2dd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 11 Jan 2013 12:21:15 -0700 Subject: PCI: shpchp: Use per-slot workqueues to avoid deadlock When we have an SHPC-capable bridge with a second SHPC-capable bridge below it, pushing the upstream bridge's attention button causes a deadlock. The deadlock happens because we use the shpchp_wq workqueue to run shpchp_pushbutton_thread(), which uses shpchp_disable_slot() to remove devices below the upstream bridge. When we remove the downstream bridge, we call shpc_remove(), the shpchp driver's .remove() method. That calls flush_workqueue(shpchp_wq), which deadlocks because the shpchp_pushbutton_thread() work item is still running. This patch avoids the deadlock by creating a workqueue for every slot and removing the single shared workqueue. Here's the call path that leads to the deadlock: shpchp_queue_pushbutton_work queue_work(shpchp_wq) # shpchp_pushbutton_thread ... shpchp_pushbutton_thread shpchp_disable_slot remove_board shpchp_unconfigure_device pci_stop_and_remove_bus_device ... shpc_remove # shpchp driver .remove method hpc_release_ctlr cleanup_slots flush_workqueue(shpchp_wq) This change is based on code inspection, since we don't have hardware with this topology. Based-on-patch-by: Yijing Wang Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 1b69d95..b849f995 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -46,7 +46,6 @@ extern bool shpchp_poll_mode; extern int shpchp_poll_time; extern bool shpchp_debug; -extern struct workqueue_struct *shpchp_wq; #define dbg(format, arg...) \ do { \ @@ -90,6 +89,7 @@ struct slot { struct list_head slot_list; struct delayed_work work; /* work for button event */ struct mutex lock; + struct workqueue_struct *wq; u8 hp_slot; }; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 3774e0d..3100c52 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ bool shpchp_debug; bool shpchp_poll_mode; int shpchp_poll_time; -struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -128,6 +127,14 @@ static int init_slots(struct controller *ctrl) slot->device = ctrl->slot_device_offset + i; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot + (ctrl->slot_num_inc * i); + + snprintf(name, sizeof(name), "shpchp-%d", slot->number); + slot->wq = alloc_workqueue(name, 0, 0); + if (!slot->wq) { + retval = -ENOMEM; + goto error_info; + } + mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, shpchp_queue_pushbutton_work); @@ -147,7 +154,7 @@ static int init_slots(struct controller *ctrl) if (retval) { ctrl_err(ctrl, "pci_hp_register failed with error %d\n", retval); - goto error_info; + goto error_slotwq; } get_power_status(hotplug_slot, &info->power_status); @@ -159,6 +166,8 @@ static int init_slots(struct controller *ctrl) } return 0; +error_slotwq: + destroy_workqueue(slot->wq); error_info: kfree(info); error_hpslot: @@ -179,7 +188,7 @@ void cleanup_slots(struct controller *ctrl) slot = list_entry(tmp, struct slot, slot_list); list_del(&slot->slot_list); cancel_delayed_work(&slot->work); - flush_workqueue(shpchp_wq); + destroy_workqueue(slot->wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -362,18 +371,12 @@ static struct pci_driver shpc_driver = { static int __init shpcd_init(void) { - int retval = 0; - - shpchp_wq = alloc_workqueue("shpchp", 0, 0); - if (!shpchp_wq) - return -ENOMEM; + int retval; retval = pci_register_driver(&shpc_driver); dbg("%s: pci_register_driver = %d\n", __func__, retval); info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - if (retval) { - destroy_workqueue(shpchp_wq); - } + return retval; } @@ -381,7 +384,6 @@ static void __exit shpcd_cleanup(void) { dbg("unload_shpchpd()\n"); pci_unregister_driver(&shpc_driver); - destroy_workqueue(shpchp_wq); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index fd2cae9..5849927 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -51,7 +51,7 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) info->p_slot = p_slot; INIT_WORK(&info->work, interrupt_event_handler); - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); return 0; } @@ -453,7 +453,7 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) kfree(info); goto out; } - queue_work(shpchp_wq, &info->work); + queue_work(p_slot->wq, &info->work); out: mutex_unlock(&p_slot->lock); } @@ -501,7 +501,7 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->green_led_blink(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); - queue_delayed_work(shpchp_wq, &p_slot->work, 5*HZ); + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); break; case BLINKINGOFF_STATE: case BLINKINGON_STATE: -- cgit v0.10.2 From 1eaca39a84170b369fe61fb1da3c1e8606859e99 Mon Sep 17 00:00:00 2001 From: Bian Yu Date: Wed, 12 Dec 2012 22:26:58 -0500 Subject: [libata] ahci: Fix lack of command retry after a success error handler. It should be a mistake introduced by commit 8d899e70c1b3afff. qc->flags can't be set AC_ERR_* Signed-off-by: Bian Yu Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index bf039b0..bcf4437 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, */ static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc) { - if (qc->flags & AC_ERR_MEDIA) + if (qc->err_mask & AC_ERR_MEDIA) return 0; /* don't retry media errors */ if (qc->flags & ATA_QCFLAG_IO) return 1; /* otherwise retry anything from fs stack */ -- cgit v0.10.2 From 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 Mon Sep 17 00:00:00 2001 From: Hugh Daschbach Date: Fri, 4 Jan 2013 14:39:09 -0800 Subject: [libata] ahci: Add support for Enmotus Bobcat device. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by: Hugh Daschbach Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7862d17..4979127 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* Enmotus */ + { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* The Connext uses non-standard BAR */ + /* Both Connext and Enmotus devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; + else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) + ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; /* acquire resources */ rc = pcim_enable_device(pdev); -- cgit v0.10.2 From 803739d25c2343da6d2f95eebdcbc08bf67097d4 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Mon, 17 Dec 2012 23:18:59 +0800 Subject: [libata] replace sata_settings with devslp_timing NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov Signed-off-by: Shane Huang Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 320712a..6cd7805 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) /* Use the nominal value 10 ms if the read MDAT is zero, * the nominal value of DETO is 20 ms. */ - if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] & + if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] & ATA_LOG_DEVSLP_VALID_MASK) { - mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] & + mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] & ATA_LOG_DEVSLP_MDAT_MASK; if (!mdat) mdat = 10; - deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO]; + deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO]; if (!deto) deto = 20; } else { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9e8b99a..46cd3f4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev) } } - /* check and mark DevSlp capability */ - if (ata_id_has_devslp(dev->id)) - dev->flags |= ATA_DFLAG_DEVSLP; - - /* Obtain SATA Settings page from Identify Device Data Log, - * which contains DevSlp timing variables etc. - * Exclude old devices with ata_id_has_ncq() + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. */ - if (ata_id_has_ncq(dev->id)) { + if (ata_id_has_devslp(dev->id)) { + u8 sata_setting[ATA_SECT_SIZE]; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, ATA_LOG_SATA_SETTINGS, - dev->sata_settings, + sata_setting, 1); if (err_mask) ata_dev_dbg(dev, "failed to get Identify Device Data, Emask 0x%x\n", err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } } dev->cdb_len = 16; diff --git a/include/linux/ata.h b/include/linux/ata.h index 408da95..8f7a3d6 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -297,10 +297,12 @@ enum { ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_SATA_ID_DEV_DATA = 0x30, ATA_LOG_SATA_SETTINGS = 0x08, - ATA_LOG_DEVSLP_MDAT = 0x30, + ATA_LOG_DEVSLP_OFFSET = 0x30, + ATA_LOG_DEVSLP_SIZE = 0x08, + ATA_LOG_DEVSLP_MDAT = 0x00, ATA_LOG_DEVSLP_MDAT_MASK = 0x1F, - ATA_LOG_DEVSLP_DETO = 0x31, - ATA_LOG_DEVSLP_VALID = 0x37, + ATA_LOG_DEVSLP_DETO = 0x01, + ATA_LOG_DEVSLP_VALID = 0x07, ATA_LOG_DEVSLP_VALID_MASK = 0x80, /* READ/WRITE LONG (obsolete) */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 83ba0ab..649e5f8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -652,8 +652,8 @@ struct ata_device { u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; - /* Identify Device Data Log (30h), SATA Settings (page 08h) */ - u8 sata_settings[ATA_SECT_SIZE]; + /* DEVSLP Timing Variables from Identify Device Data Log */ + u8 devslp_timing[ATA_LOG_DEVSLP_SIZE]; /* error history */ int spdn_cnt; -- cgit v0.10.2 From cfa7a9ccda711ac6ab8f0d17c3a9b540092d305a Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Mon, 17 Dec 2012 06:38:51 +0000 Subject: Btrfs: fix memory leak in name_cache_insert() We should free name_cache_entry before returning from the error handling code. Signed-off-by: Tsutomu Itoh diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 5445454..321b7fb 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -1814,8 +1814,10 @@ static int name_cache_insert(struct send_ctx *sctx, (unsigned long)nce->ino); if (!nce_head) { nce_head = kmalloc(sizeof(*nce_head), GFP_NOFS); - if (!nce_head) + if (!nce_head) { + kfree(nce); return -ENOMEM; + } INIT_LIST_HEAD(nce_head); ret = radix_tree_insert(&sctx->name_cache, nce->ino, nce_head); -- cgit v0.10.2 From cc975eb4605c5765a5d5e7a51d24ba5a1cda269e Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Fri, 7 Dec 2012 10:09:19 +0000 Subject: btrfs: get the device in write mode when deleting it When we're deleting the device we should get it in write mode since we're going to re-write the super block magic on that device. And it should fail if the device is read-only. Signed-off-by: Lukas Czerner diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 5cce6aa..86279c3 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1431,7 +1431,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } } else { ret = btrfs_get_bdev_and_sb(device_path, - FMODE_READ | FMODE_EXCL, + FMODE_WRITE | FMODE_EXCL, root->fs_info->bdev_holder, 0, &bdev, &bh); if (ret) -- cgit v0.10.2 From d86e56cf7d3669dd292012ac82b986bd1573b6cc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 15 Nov 2012 11:35:41 +0000 Subject: Btrfs: disable qgroup id 0 Qgroup id 0 is a special number, we should set the id of a qgroup to 0. Fix it. Signed-off-by: Miao Xie diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 7624212..dd8e344 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3698,6 +3698,11 @@ static long btrfs_ioctl_qgroup_create(struct file *file, void __user *arg) goto drop_write; } + if (!sa->qgroupid) { + ret = -EINVAL; + goto out; + } + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) { ret = PTR_ERR(trans); -- cgit v0.10.2 From 5c39da5b6ca23e68e7acea7f4c01470383475214 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Mon, 22 Oct 2012 11:39:53 +0000 Subject: Btrfs: do not delete a subvolume which is in a R/O subvolume Step to reproduce: # mkfs.btrfs # mount # btrfs sub create /subv0 # btrfs sub snap /subv0/snap0 # change /subv0 from R/W to R/O # btrfs sub del /subv0/snap0 We deleted the snapshot successfully. I think we should not be able to delete the snapshot since the parent subvolume is R/O. Signed-off-by: Miao Xie diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index dd8e344..5a72896 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2095,13 +2095,13 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file, err = inode_permission(inode, MAY_WRITE | MAY_EXEC); if (err) goto out_dput; - - /* check if subvolume may be deleted by a non-root user */ - err = btrfs_may_delete(dir, dentry, 1); - if (err) - goto out_dput; } + /* check if subvolume may be deleted by a user */ + err = btrfs_may_delete(dir, dentry, 1); + if (err) + goto out_dput; + if (btrfs_ino(inode) != BTRFS_FIRST_FREE_OBJECTID) { err = -EINVAL; goto out_dput; -- cgit v0.10.2 From dba60f3f5d564167118cad151a7d41dfe8d2a5f7 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 21 Dec 2012 09:19:51 +0000 Subject: Btrfs: fix resize a readonly device We should not resize a readonly device, fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5a72896..0de2121 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1362,6 +1362,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, printk(KERN_INFO "btrfs: resizing devid %llu\n", (unsigned long long)devid); } + device = btrfs_find_device(root->fs_info, devid, NULL, NULL); if (!device) { printk(KERN_INFO "btrfs: resizer unable to find device %llu\n", @@ -1369,9 +1370,10 @@ static noinline int btrfs_ioctl_resize(struct file *file, ret = -EINVAL; goto out_free; } - if (device->fs_devices && device->fs_devices->seeding) { + + if (!device->writeable) { printk(KERN_INFO "btrfs: resizer unable to apply on " - "seeding device %llu\n", + "readonly device %llu\n", (unsigned long long)devid); ret = -EINVAL; goto out_free; -- cgit v0.10.2 From 97547676570b3bd908560741315bf4b7d635bcf5 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 21 Dec 2012 10:38:50 +0000 Subject: Btrfs: fix missing write access release in btrfs_ioctl_resize() We forget to give up the write access after we find some device operation is going on. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 0de2121..982c0b9 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1339,6 +1339,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + mnt_drop_write_file(file); return -EINPROGRESS; } -- cgit v0.10.2 From 72bcd99d450cb1dde8bf13c3b65fc5883b2a3893 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 18 Dec 2012 15:16:34 -0500 Subject: Btrfs: set flushing if we're limited flushing We still need to say we're flushing if we're limit flushing to keep somebody from coming in and stealing our reservation. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index d133edf..61fefda 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3997,7 +3997,7 @@ again: * We make the other tasks wait for the flush only when we can flush * all things. */ - if (ret && flush == BTRFS_RESERVE_FLUSH_ALL) { + if (ret && flush != BTRFS_RESERVE_NO_FLUSH) { flushing = true; space_info->flush = 1; } -- cgit v0.10.2 From f3fe820c20a1a36c790545184e734e78d61cd68d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 7 Jan 2013 17:03:21 -0500 Subject: Btrfs: add orphan before truncating pagecache Running xfstests 83 in a loop would sometimes fail the fsck. This happens because if we invalidate a page that already has an ordered extent setup for it we will complete the ordered extent ourselves, assuming that the truncate will clean everything up. The problem with this is there is plenty of time for the truncate to fail after we've done this work. So to fix this we need to add the orphan item first to make sure the cleanup gets done properly, and then we can truncate the pagecache and all that stuff and be safe. This fixes the btrfsck failures I was seeing while running 83 in a loop. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 67ed24a..4ddcf79 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2478,6 +2478,18 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) continue; } nr_truncate++; + + /* 1 for the orphan item deletion. */ + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + goto out; + } + ret = btrfs_orphan_add(trans, inode); + btrfs_end_transaction(trans, root); + if (ret) + goto out; + ret = btrfs_truncate(inode); } else { nr_unlink++; @@ -3783,9 +3795,34 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) set_bit(BTRFS_INODE_ORDERED_DATA_CLOSE, &BTRFS_I(inode)->runtime_flags); + /* + * 1 for the orphan item we're going to add + * 1 for the orphan item deletion. + */ + trans = btrfs_start_transaction(root, 2); + if (IS_ERR(trans)) + return PTR_ERR(trans); + + /* + * We need to do this in case we fail at _any_ point during the + * actual truncate. Once we do the truncate_setsize we could + * invalidate pages which forces any outstanding ordered io to + * be instantly completed which will give us extents that need + * to be truncated. If we fail to get an orphan inode down we + * could have left over extents that were never meant to live, + * so we need to garuntee from this point on that everything + * will be consistent. + */ + ret = btrfs_orphan_add(trans, inode); + btrfs_end_transaction(trans, root); + if (ret) + return ret; + /* we don't support swapfiles, so vmtruncate shouldn't fail */ truncate_setsize(inode, newsize); ret = btrfs_truncate(inode); + if (ret && inode->i_nlink) + btrfs_orphan_del(NULL, inode); } return ret; @@ -6929,11 +6966,9 @@ static int btrfs_truncate(struct inode *inode) /* * 1 for the truncate slack space - * 1 for the orphan item we're going to add - * 1 for the orphan item deletion * 1 for updating the inode. */ - trans = btrfs_start_transaction(root, 4); + trans = btrfs_start_transaction(root, 2); if (IS_ERR(trans)) { err = PTR_ERR(trans); goto out; @@ -6944,12 +6979,6 @@ static int btrfs_truncate(struct inode *inode) min_size); BUG_ON(ret); - ret = btrfs_orphan_add(trans, inode); - if (ret) { - btrfs_end_transaction(trans, root); - goto out; - } - /* * setattr is responsible for setting the ordered_data_close flag, * but that is only tested during the last file release. That @@ -7018,12 +7047,6 @@ static int btrfs_truncate(struct inode *inode) ret = btrfs_orphan_del(trans, inode); if (ret) err = ret; - } else if (ret && inode->i_nlink > 0) { - /* - * Failed to do the truncate, remove us from the in memory - * orphan list. - */ - ret = btrfs_orphan_del(NULL, inode); } if (trans) { -- cgit v0.10.2 From ac5c93005b7073732e268606688fb6c821d5310e Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 27 Dec 2012 09:01:24 +0000 Subject: Btrfs: let allocation start from the right raid type This'd avoid us empty looping. Say we have only one disk and the metadata raid type will be defaultly DUP, and we do not need to start from index=0(RAID10) and get over two empty loops to index=2(DUP). Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 61fefda..aeba531 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5560,7 +5560,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, int empty_cluster = 2 * 1024 * 1024; struct btrfs_space_info *space_info; int loop = 0; - int index = 0; + int index = __get_raid_index(data); int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ? RESERVE_ALLOC_NO_ACCOUNT : RESERVE_ALLOC; bool found_uncached_bg = false; -- cgit v0.10.2 From 3268a2468eb6a31af89930cbae58a62fe6ca6d2d Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Fri, 28 Dec 2012 09:33:19 +0000 Subject: Btrfs: reset path lock state to zero We forgot to reset the path lock state to zero after we unlock the path block, and this can lead to the ASSERT checker in tree unlock API. Reported-by: Slava Barinov Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index aeba531..85b8454 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6788,11 +6788,13 @@ static noinline int walk_up_proc(struct btrfs_trans_handle *trans, &wc->flags[level]); if (ret < 0) { btrfs_tree_unlock_rw(eb, path->locks[level]); + path->locks[level] = 0; return ret; } BUG_ON(wc->refs[level] == 0); if (wc->refs[level] == 1) { btrfs_tree_unlock_rw(eb, path->locks[level]); + path->locks[level] = 0; return 1; } } -- cgit v0.10.2 From 1214b53f90131fee1f950010c43e92455fe598ab Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 7 Jan 2013 03:53:08 +0000 Subject: Btrfs: fix off-by-one in lseek Lock end is inclusive. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 20452c1..fa48051 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2242,6 +2242,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) if (lockend <= lockstart) lockend = lockstart + root->sectorsize; + lockend--; len = lockend - lockstart + 1; len = max_t(u64, len, root->sectorsize); -- cgit v0.10.2 From f9e4fb53938de5db01950c9dfe479703b2f5c964 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Mon, 7 Jan 2013 10:10:12 +0000 Subject: Btrfs: fix a bug when llseek for delalloc bytes behind prealloc extents xfstests case 285 complains. It it because btrfs did not try to find unwritten delalloc bytes(only dirty pages, not yet writeback) behind prealloc extents, it ends up finding nothing while we're with SEEK_DATA. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index fa48051..841cfe3 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2309,9 +2309,12 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) } } - *offset = start; - free_extent_map(em); - break; + if (!test_bit(EXTENT_FLAG_PREALLOC, + &em->flags)) { + *offset = start; + free_extent_map(em); + break; + } } } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4ddcf79..ac98384 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5623,10 +5623,13 @@ struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *pag return em; if (em) { /* - * if our em maps to a hole, there might - * actually be delalloc bytes behind it + * if our em maps to + * - a hole or + * - a pre-alloc extent, + * there might actually be delalloc bytes behind it. */ - if (em->block_start != EXTENT_MAP_HOLE) + if (em->block_start != EXTENT_MAP_HOLE && + !test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) return em; else hole_em = em; @@ -5708,6 +5711,8 @@ struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *pag */ em->block_start = hole_em->block_start; em->block_len = hole_len; + if (test_bit(EXTENT_FLAG_PREALLOC, &hole_em->flags)) + set_bit(EXTENT_FLAG_PREALLOC, &em->flags); } else { em->start = range_start; em->len = found; -- cgit v0.10.2 From f276795627045a3c599a60b476767861e4318c7d Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Tue, 8 Jan 2013 19:37:58 +0000 Subject: btrfs: fix btrfs_cont_expand() freeing IS_ERR em btrfs_cont_expand() tries to free an IS_ERR em as it gets an error from btrfs_get_extent() and breaks out of its loop. An instance of -EEXIST was reported in the wild: https://bugzilla.redhat.com/show_bug.cgi?id=874407 I have no idea if that -EEXIST is surprising, or not. Regardless, this error handling should be cleaned up to handle other reasonable errors (ENOMEM, EIO; whatever). This seemed to be the only buggy freeing of the relatively rare IS_ERR em so I opted to fix the caller rather than teach free_extent_map() to use IS_ERR_OR_NULL(). Signed-off-by: Zach Brown Reviewed-by: Eric Sandeen Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index ac98384..3d2c64d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3677,6 +3677,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) block_end - cur_offset, 0); if (IS_ERR(em)) { err = PTR_ERR(em); + em = NULL; break; } last_byte = min(extent_map_end(em), block_end); -- cgit v0.10.2 From 3972f2603d8570effaf633cea52b12c7c2773c11 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 12 Jan 2013 02:57:22 +0000 Subject: btrfs: update timestamps on truncate() truncate() vs. ftruncate() differ in the VFS; truncate() doesn't set (ATTR_CTIME | ATTR_MTIME), and it's up to the fs to do the timestamp updates if the size changes. Signed-off-by: Eric Sandeen Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3d2c64d..9bc6c40 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -88,7 +88,7 @@ static unsigned char btrfs_type_by_mode[S_IFMT >> S_SHIFT] = { [S_IFLNK >> S_SHIFT] = BTRFS_FT_SYMLINK, }; -static int btrfs_setsize(struct inode *inode, loff_t newsize); +static int btrfs_setsize(struct inode *inode, struct iattr *attr); static int btrfs_truncate(struct inode *inode); static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent); static noinline int cow_file_range(struct inode *inode, @@ -3761,16 +3761,27 @@ next: return err; } -static int btrfs_setsize(struct inode *inode, loff_t newsize) +static int btrfs_setsize(struct inode *inode, struct iattr *attr) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_trans_handle *trans; loff_t oldsize = i_size_read(inode); + loff_t newsize = attr->ia_size; + int mask = attr->ia_valid; int ret; if (newsize == oldsize) return 0; + /* + * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a + * special case where we need to update the times despite not having + * these flags set. For all other operations the VFS set these flags + * explicitly if it wants a timestamp update. + */ + if (newsize != oldsize && (!(mask & (ATTR_CTIME | ATTR_MTIME)))) + inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); + if (newsize > oldsize) { truncate_pagecache(inode, oldsize, newsize); ret = btrfs_cont_expand(inode, oldsize, newsize); @@ -3843,7 +3854,7 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) return err; if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) { - err = btrfs_setsize(inode, attr->ia_size); + err = btrfs_setsize(inode, attr); if (err) return err; } -- cgit v0.10.2 From 9e16721498b0c3d3ebfa0b503c63d35c0a4c0642 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 27 Nov 2012 14:09:40 +0000 Subject: PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported Right now using pcie_aspm=force will not enable ASPM if the FADT indicates ASPM is unsupported. However, the semantics of force should probably allow for this, especially as they did before 3c076351c4 ("PCI: Rework ASPM disable code") This patch just skips the clearing of any ASPM setup that the firmware has carried out on this bus if pcie_aspm=force is being used. Reference: http://bugs.launchpad.net/bugs/962038 Signed-off-by: Colin Ian King Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index b52630b..8474b6a 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -771,6 +771,9 @@ void pcie_clear_aspm(struct pci_bus *bus) { struct pci_dev *child; + if (aspm_force) + return; + /* * Clear any ASPM setup that the firmware has carried out on this bus */ -- cgit v0.10.2 From fa9150a84ca333f68127097c4fa1eda4b3913a22 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 15 Jan 2013 16:45:24 +0900 Subject: f2fs: remove the blk_plug usage in f2fs_write_data_pages Let's consider the usage of blk_plug in f2fs_write_data_pages(). We can come up with the two issues: lock contention and task awareness. 1. Merging bios prior to grabing "queue lock" The f2fs merges consecutive IOs in the file system level before submitting any bios, which is similar with the back merge by the plugging mechanism in attempt_plug_merge(). Both of them need to acquire no queue lock. 2. Merging policy with respect to tasks The f2fs merges IOs as much as possible regardless of tasks, while blk-plugging is conducted on a basis of tasks. As we can understand there are trade-offs, f2fs tries to maximize the write performance with well-merged bios. As a result, if f2fs produces many consecutive but separated bios in writepages(), it would be good to use blk-plugging since f2fs would be able to avoid queue lock contention in the block layer by merging them. But, f2fs merges IOs and submit one bio, which means that there are not much chances to merge bios by attempt_plug_merge(). However, f2fs has already been used blk_plug by triggering generic_writepages() in f2fs_write_data_pages(). So to make the overall code consistency, I'd like to remove blk_plug there. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 3aa5ce7..b1347fc 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -547,6 +547,15 @@ redirty_out: #define MAX_DESIRED_PAGES_WP 4096 +static int __f2fs_writepage(struct page *page, struct writeback_control *wbc, + void *data) +{ + struct address_space *mapping = data; + int ret = mapping->a_ops->writepage(page, wbc); + mapping_set_error(mapping, ret); + return ret; +} + static int f2fs_write_data_pages(struct address_space *mapping, struct writeback_control *wbc) { @@ -563,7 +572,7 @@ static int f2fs_write_data_pages(struct address_space *mapping, if (!S_ISDIR(inode->i_mode)) mutex_lock(&sbi->writepages); - ret = generic_writepages(mapping, wbc); + ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping); if (!S_ISDIR(inode->i_mode)) mutex_unlock(&sbi->writepages); f2fs_submit_bio(sbi, DATA, (wbc->sync_mode == WB_SYNC_ALL)); -- cgit v0.10.2 From 66af62ce7588736ae65edfdb1c0df597775c4d21 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Mon, 14 Jan 2013 20:08:16 +0800 Subject: f2fs: add global mutex_lock to protect f2fs_stat_list There is an race condition between umounting f2fs and reading f2fs/status, which results in oops. Fox example: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { list_for_each_entry_safe(&f2fs_stat_list) list_del(&si->stat_list); mutex_lock(&si->stat_lock); si->sbi = NULL; mutex_unlock(&si->stat_lock); kfree(sbi->stat_info); } mutex_lock(&si->stat_lock) <- si is gone. ... } Solution with a global lock: f2fs_stat_mutex: Thread A Thread B umount f2fs cat f2fs/status f2fs_destroy_stats() { stat_show() { mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); mutex_unlock(&f2fs_stat_mutex); kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex); } list_for_each_entry_safe(&f2fs_stat_list) ... mutex_unlock(&f2fs_stat_mutex); } Signed-off-by: Jianpeng Ma [jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock] Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index b8ed7a7..73f034a 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -26,6 +26,7 @@ static LIST_HEAD(f2fs_stat_list); static struct dentry *debugfs_root; +static DEFINE_MUTEX(f2fs_stat_mutex); static void update_general_status(struct f2fs_sb_info *sbi) { @@ -180,13 +181,9 @@ static int stat_show(struct seq_file *s, void *v) int i = 0; int j; + mutex_lock(&f2fs_stat_mutex); list_for_each_entry_safe(si, next, &f2fs_stat_list, stat_list) { - mutex_lock(&si->stat_lock); - if (!si->sbi) { - mutex_unlock(&si->stat_lock); - continue; - } update_general_status(si->sbi); seq_printf(s, "\n=====[ partition info. #%d ]=====\n", i++); @@ -286,8 +283,8 @@ static int stat_show(struct seq_file *s, void *v) seq_printf(s, "\nMemory: %u KB = static: %u + cached: %u\n", (si->base_mem + si->cache_mem) >> 10, si->base_mem >> 10, si->cache_mem >> 10); - mutex_unlock(&si->stat_lock); } + mutex_unlock(&f2fs_stat_mutex); return 0; } @@ -313,9 +310,6 @@ static int init_stats(struct f2fs_sb_info *sbi) return -ENOMEM; si = sbi->stat_info; - mutex_init(&si->stat_lock); - list_add_tail(&si->stat_list, &f2fs_stat_list); - si->all_area_segs = le32_to_cpu(raw_super->segment_count); si->sit_area_segs = le32_to_cpu(raw_super->segment_count_sit); si->nat_area_segs = le32_to_cpu(raw_super->segment_count_nat); @@ -325,6 +319,11 @@ static int init_stats(struct f2fs_sb_info *sbi) si->main_area_zones = si->main_area_sections / le32_to_cpu(raw_super->secs_per_zone); si->sbi = sbi; + + mutex_lock(&f2fs_stat_mutex); + list_add_tail(&si->stat_list, &f2fs_stat_list); + mutex_unlock(&f2fs_stat_mutex); + return 0; } @@ -347,10 +346,10 @@ void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { struct f2fs_stat_info *si = sbi->stat_info; + mutex_lock(&f2fs_stat_mutex); list_del(&si->stat_list); - mutex_lock(&si->stat_lock); - si->sbi = NULL; - mutex_unlock(&si->stat_lock); + mutex_unlock(&f2fs_stat_mutex); + kfree(sbi->stat_info); } -- cgit v0.10.2 From 4589d25d015c2d02bb5f7075d0cbf6dcf23a33c0 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 15 Jan 2013 19:58:47 +0900 Subject: f2fs: fix the debugfs entry creation path As the "status" debugfs entry will be maintained for entire F2FS filesystem irrespective of the number of partitions. So, we can move the initialization to the init part of the f2fs and destroy will be done from exit part. After making changes, for individual partition mount - entry creation code will not be executed. Signed-off-by: Jianpeng Ma Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/debug.c b/fs/f2fs/debug.c index 73f034a..c8c3730 100644 --- a/fs/f2fs/debug.c +++ b/fs/f2fs/debug.c @@ -300,7 +300,7 @@ static const struct file_operations stat_fops = { .release = single_release, }; -static int init_stats(struct f2fs_sb_info *sbi) +int f2fs_build_stats(struct f2fs_sb_info *sbi) { struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi); struct f2fs_stat_info *si; @@ -327,21 +327,6 @@ static int init_stats(struct f2fs_sb_info *sbi) return 0; } -int f2fs_build_stats(struct f2fs_sb_info *sbi) -{ - int retval; - - retval = init_stats(sbi); - if (retval) - return retval; - - if (!debugfs_root) - debugfs_root = debugfs_create_dir("f2fs", NULL); - - debugfs_create_file("status", S_IRUGO, debugfs_root, NULL, &stat_fops); - return 0; -} - void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { struct f2fs_stat_info *si = sbi->stat_info; @@ -353,7 +338,15 @@ void f2fs_destroy_stats(struct f2fs_sb_info *sbi) kfree(sbi->stat_info); } -void destroy_root_stats(void) +void __init f2fs_create_root_stats(void) +{ + debugfs_root = debugfs_create_dir("f2fs", NULL); + if (debugfs_root) + debugfs_create_file("status", S_IRUGO, debugfs_root, + NULL, &stat_fops); +} + +void f2fs_destroy_root_stats(void) { debugfs_remove_recursive(debugfs_root); debugfs_root = NULL; diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 285e43d..976325d 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -1060,7 +1060,8 @@ struct f2fs_stat_info { int f2fs_build_stats(struct f2fs_sb_info *); void f2fs_destroy_stats(struct f2fs_sb_info *); -void destroy_root_stats(void); +void f2fs_create_root_stats(void); +void f2fs_destroy_root_stats(void); #else #define stat_inc_call_count(si) #define stat_inc_seg_count(si, type) @@ -1070,7 +1071,8 @@ void destroy_root_stats(void); static inline int f2fs_build_stats(struct f2fs_sb_info *sbi) { return 0; } static inline void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { } -static inline void destroy_root_stats(void) { } +static inline void f2fs_create_root_stats(void) { } +static inline void f2fs_destroy_root_stats(void) { } #endif extern const struct file_operations f2fs_dir_operations; diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index ac127fd..d551a72 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -675,14 +675,17 @@ static int __init init_f2fs_fs(void) err = create_checkpoint_caches(); if (err) goto fail; - return register_filesystem(&f2fs_fs_type); + err = register_filesystem(&f2fs_fs_type); + if (err) + goto fail; + f2fs_create_root_stats(); fail: return err; } static void __exit exit_f2fs_fs(void) { - destroy_root_stats(); + f2fs_destroy_root_stats(); unregister_filesystem(&f2fs_fs_type); destroy_checkpoint_caches(); destroy_gc_caches(); -- cgit v0.10.2 From 0f3b6849dd55943d915f4b461d7db5e8308d4083 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 12:05:55 +0000 Subject: drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state These are useful for investigating hangs involving WAIT_FOR_EVENT. Signed-off-by: Chris Wilson [danvet: Apply a droplet of Future-Proof in the if-ladder.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index e6a11ca8..7944d3015 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -641,6 +641,7 @@ static void i915_ring_error_state(struct seq_file *m, seq_printf(m, "%s command stream:\n", ring_str(ring)); seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]); seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]); + seq_printf(m, " CTL: 0x%08x\n", error->ctl[ring]); seq_printf(m, " ACTHD: 0x%08x\n", error->acthd[ring]); seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir[ring]); seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr[ring]); @@ -693,6 +694,8 @@ static int i915_error_state(struct seq_file *m, void *unused) seq_printf(m, "EIR: 0x%08x\n", error->eir); seq_printf(m, "IER: 0x%08x\n", error->ier); seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake); + seq_printf(m, "DERRMR: 0x%08x\n", error->derrmr); seq_printf(m, "CCID: 0x%08x\n", error->ccid); for (i = 0; i < dev_priv->num_fence_regs; i++) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ed30595..12ab3bd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -188,10 +188,13 @@ struct drm_i915_error_state { u32 pgtbl_er; u32 ier; u32 ccid; + u32 derrmr; + u32 forcewake; bool waiting[I915_NUM_RINGS]; u32 pipestat[I915_MAX_PIPES]; u32 tail[I915_NUM_RINGS]; u32 head[I915_NUM_RINGS]; + u32 ctl[I915_NUM_RINGS]; u32 ipeir[I915_NUM_RINGS]; u32 ipehr[I915_NUM_RINGS]; u32 instdone[I915_NUM_RINGS]; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 2220dec..fe84338 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1157,6 +1157,7 @@ static void i915_record_ring_state(struct drm_device *dev, error->acthd[ring->id] = intel_ring_get_active_head(ring); error->head[ring->id] = I915_READ_HEAD(ring); error->tail[ring->id] = I915_READ_TAIL(ring); + error->ctl[ring->id] = I915_READ_CTL(ring); error->cpu_ring_head[ring->id] = ring->head; error->cpu_ring_tail[ring->id] = ring->tail; @@ -1251,6 +1252,16 @@ static void i915_capture_error_state(struct drm_device *dev) else error->ier = I915_READ(IER); + if (INTEL_INFO(dev)->gen >= 6) + error->derrmr = I915_READ(DERRMR); + + if (IS_VALLEYVIEW(dev)) + error->forcewake = I915_READ(FORCEWAKE_VLV); + else if (INTEL_INFO(dev)->gen >= 7) + error->forcewake = I915_READ(FORCEWAKE_MT); + else if (INTEL_INFO(dev)->gen == 6) + error->forcewake = I915_READ(FORCEWAKE); + for_each_pipe(pipe) error->pipestat[pipe] = I915_READ(PIPESTAT(pipe)); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 186ee5c..b401788 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -512,6 +512,8 @@ #define GEN7_ERR_INT 0x44040 #define ERR_INT_MMIO_UNCLAIMED (1<<13) +#define DERRMR 0x44050 + /* GM45+ chicken bits -- debug workaround bits that may be required * for various sorts of correct behavior. The top 16 bits of each are * the enables for writing to the corresponding low bit. -- cgit v0.10.2 From 19fc42ed9950d5fe17089c0a928121047c882092 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 14 Jan 2013 11:04:39 -0500 Subject: drm/radeon: clear reset flags if engines are idle Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e0d14e9948e0b1529883a776758117d6f "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html Reported-by: Eldad Zack Tested-by: Eldad Zack Acked-by: Paul Menzel Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 061fa0a..4d0e60a 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2401,6 +2401,12 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 896f1cb..59acabb 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1409,6 +1409,12 @@ static int cayman_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 537e259..3cb9d60 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1378,6 +1378,12 @@ static int r600_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct rv515_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 3240a3d..ae8b482 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2215,6 +2215,12 @@ static int si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) { struct evergreen_mc_save save; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + reset_mask &= ~(RADEON_RESET_GFX | RADEON_RESET_COMPUTE); + + if (RREG32(DMA_STATUS_REG) & DMA_IDLE) + reset_mask &= ~RADEON_RESET_DMA; + if (reset_mask == 0) return 0; -- cgit v0.10.2 From c18b1170493de637eea58671da7df5689ce13491 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sat, 12 Jan 2013 04:19:37 +0100 Subject: drm/radeon: allow FP16 color clear registers on r500 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dff6cf7..d9bf96e 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -69,9 +69,10 @@ * 2.26.0 - r600-eg: fix htile size computation * 2.27.0 - r600-SI: Add CS ioctl support for async DMA * 2.28.0 - r600-eg: Add MEM_WRITE packet support + * 2.29.0 - R500 FP16 color clear registers */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 28 +#define KMS_DRIVER_MINOR 29 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515 index 911a8fb..78d5e99 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/rv515 +++ b/drivers/gpu/drm/radeon/reg_srcs/rv515 @@ -324,6 +324,8 @@ rv515 0x6d40 0x46AC US_OUT_FMT_2 0x46B0 US_OUT_FMT_3 0x46B4 US_W_FMT +0x46C0 RB3D_COLOR_CLEAR_VALUE_AR +0x46C4 RB3D_COLOR_CLEAR_VALUE_GB 0x4BC0 FG_FOG_BLEND 0x4BC4 FG_FOG_FACTOR 0x4BC8 FG_FOG_COLOR_R -- cgit v0.10.2 From 5f0839c11e17d8d942ab02626752f95e30a02a4c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 11 Jan 2013 15:19:43 -0500 Subject: drm/radeon: improve semaphore debugging on lockup Signed-off-by: Jerome Glisse Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 34e5230..768e8fe 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -654,6 +654,8 @@ struct radeon_ring { u32 ptr_reg_mask; u32 nop; u32 idx; + u64 last_semaphore_signal_addr; + u64 last_semaphore_wait_addr; }; /* diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 141f2b6..2430d80 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -784,6 +784,8 @@ static int radeon_debugfs_ring_info(struct seq_file *m, void *data) } seq_printf(m, "driver's copy of the wptr: 0x%08x [%5d]\n", ring->wptr, ring->wptr); seq_printf(m, "driver's copy of the rptr: 0x%08x [%5d]\n", ring->rptr, ring->rptr); + seq_printf(m, "last semaphore signal addr : 0x%016llx\n", ring->last_semaphore_signal_addr); + seq_printf(m, "last semaphore wait addr : 0x%016llx\n", ring->last_semaphore_wait_addr); seq_printf(m, "%u free dwords in ring\n", ring->ring_free_dw); seq_printf(m, "%u dwords in ring\n", count); /* print 8 dw before current rptr as often it's the last executed diff --git a/drivers/gpu/drm/radeon/radeon_semaphore.c b/drivers/gpu/drm/radeon/radeon_semaphore.c index 97f3ece..8dcc20f 100644 --- a/drivers/gpu/drm/radeon/radeon_semaphore.c +++ b/drivers/gpu/drm/radeon/radeon_semaphore.c @@ -95,6 +95,10 @@ int radeon_semaphore_sync_rings(struct radeon_device *rdev, /* we assume caller has already allocated space on waiters ring */ radeon_semaphore_emit_wait(rdev, waiter, semaphore); + /* for debugging lockup only, used by sysfs debug files */ + rdev->ring[signaler].last_semaphore_signal_addr = semaphore->gpu_addr; + rdev->ring[waiter].last_semaphore_wait_addr = semaphore->gpu_addr; + return 0; } -- cgit v0.10.2 From ec1287e511320a2c9a02640b7ac02d5d79f56f08 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 15 Jan 2013 10:45:26 -0700 Subject: vfio-pci: Fix buffer overfill A read from a range hidden from the user (ex. MSI-X vector table) attempts to fill the user buffer up to the end of the excluded range instead of up to the requested count. Fix it. Signed-off-by: Alex Williamson Cc: stable@vger.kernel.org diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c index 4362d9e..f72323e 100644 --- a/drivers/vfio/pci/vfio_pci_rdwr.c +++ b/drivers/vfio/pci/vfio_pci_rdwr.c @@ -240,17 +240,17 @@ ssize_t vfio_pci_mem_readwrite(struct vfio_pci_device *vdev, char __user *buf, filled = 1; } else { /* Drop writes, fill reads with FF */ + filled = min((size_t)(x_end - pos), count); if (!iswrite) { char val = 0xFF; size_t i; - for (i = 0; i < x_end - pos; i++) { + for (i = 0; i < filled; i++) { if (put_user(val, buf + i)) goto out; } } - filled = x_end - pos; } count -= filled; -- cgit v0.10.2 From 6337a23992826e68257fba51267cb6996439520d Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Thu, 22 Nov 2012 10:20:23 +0800 Subject: x86/xen : Fix the wrong check in pciback Fix the wrong check in pciback. Signed-off-by: Yang Zhang Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h index a7def01..f72af87 100644 --- a/drivers/xen/xen-pciback/pciback.h +++ b/drivers/xen/xen-pciback/pciback.h @@ -124,7 +124,7 @@ static inline int xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev, static inline void xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev, struct pci_dev *dev) { - if (xen_pcibk_backend && xen_pcibk_backend->free) + if (xen_pcibk_backend && xen_pcibk_backend->release) return xen_pcibk_backend->release(pdev, dev); } -- cgit v0.10.2 From d0b4d64aadb9f4a90669848de9ef3819050a98cd Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Tue, 15 Jan 2013 13:21:27 +0000 Subject: xen/grant-table: correctly initialize grant table version 1 Commit 85ff6acb075a484780b3d763fdf41596d8fc0970 (xen/granttable: Grant tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from a constant to a conditional expression. The expression depends on grant_table_version being appropriately set. Unfortunately, at init time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME conditional expression checks for "grant_table_version == 1", and therefore returns the number of grant references per frame for v2. This causes gnttab_init() to allocate fewer pages for gnttab_list, as a frame can old half the number of v2 entries than v1 entries. After gnttab_resume() is called, grant_table_version is appropriately set. nr_init_grefs will then be miscalculated and gnttab_free_count will hold a value larger than the actual number of free gref entries. If a guest is heavily utilizing improperly initialized v1 grant tables, memory corruption can occur. One common manifestation is corruption of the vmalloc list, resulting in a poisoned pointer derefrence when accessing /proc/meminfo or /proc/vmallocinfo: [ 40.770064] BUG: unable to handle kernel paging request at 0000200200001407 [ 40.770083] IP: [] get_vmalloc_info+0x70/0x110 [ 40.770102] PGD 0 [ 40.770107] Oops: 0000 [#1] SMP [ 40.770114] CPU 10 This patch introduces a static variable, grefs_per_grant_frame, to cache the calculated value. gnttab_init() now calls gnttab_request_version() early so that grant_table_version and grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have been added to prevent this type of bug from reoccurring in the future. Signed-off-by: Matt Wilson Reviewed-and-Tested-by: Steven Noonan Acked-by: Ian Campbell Cc: Konrad Rzeszutek Wilk Cc: Annie Li Cc: xen-devel@lists.xen.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.3 and newer Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index b91f14e..95ce9d0 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -56,10 +56,6 @@ /* External tools reserve first few grant table entries. */ #define NR_RESERVED_ENTRIES 8 #define GNTTAB_LIST_END 0xffffffff -#define GREFS_PER_GRANT_FRAME \ -(grant_table_version == 1 ? \ -(PAGE_SIZE / sizeof(struct grant_entry_v1)) : \ -(PAGE_SIZE / sizeof(union grant_entry_v2))) static grant_ref_t **gnttab_list; static unsigned int nr_grant_frames; @@ -154,6 +150,7 @@ static struct gnttab_ops *gnttab_interface; static grant_status_t *grstatus; static int grant_table_version; +static int grefs_per_grant_frame; static struct gnttab_free_callback *gnttab_free_callback_list; @@ -767,12 +764,14 @@ static int grow_gnttab_list(unsigned int more_frames) unsigned int new_nr_grant_frames, extra_entries, i; unsigned int nr_glist_frames, new_nr_glist_frames; + BUG_ON(grefs_per_grant_frame == 0); + new_nr_grant_frames = nr_grant_frames + more_frames; - extra_entries = more_frames * GREFS_PER_GRANT_FRAME; + extra_entries = more_frames * grefs_per_grant_frame; - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; new_nr_glist_frames = - (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + (new_nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = nr_glist_frames; i < new_nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC); if (!gnttab_list[i]) @@ -780,12 +779,12 @@ static int grow_gnttab_list(unsigned int more_frames) } - for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames; - i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++) + for (i = grefs_per_grant_frame * nr_grant_frames; + i < grefs_per_grant_frame * new_nr_grant_frames - 1; i++) gnttab_entry(i) = i + 1; gnttab_entry(i) = gnttab_free_head; - gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames; + gnttab_free_head = grefs_per_grant_frame * nr_grant_frames; gnttab_free_count += extra_entries; nr_grant_frames = new_nr_grant_frames; @@ -957,7 +956,8 @@ EXPORT_SYMBOL_GPL(gnttab_unmap_refs); static unsigned nr_status_frames(unsigned nr_grant_frames) { - return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP; + BUG_ON(grefs_per_grant_frame == 0); + return (nr_grant_frames * grefs_per_grant_frame + SPP - 1) / SPP; } static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes) @@ -1115,6 +1115,7 @@ static void gnttab_request_version(void) rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1); if (rc == 0 && gsv.version == 2) { grant_table_version = 2; + grefs_per_grant_frame = PAGE_SIZE / sizeof(union grant_entry_v2); gnttab_interface = &gnttab_v2_ops; } else if (grant_table_version == 2) { /* @@ -1127,17 +1128,17 @@ static void gnttab_request_version(void) panic("we need grant tables version 2, but only version 1 is available"); } else { grant_table_version = 1; + grefs_per_grant_frame = PAGE_SIZE / sizeof(struct grant_entry_v1); gnttab_interface = &gnttab_v1_ops; } printk(KERN_INFO "Grant tables using version %d layout.\n", grant_table_version); } -int gnttab_resume(void) +static int gnttab_setup(void) { unsigned int max_nr_gframes; - gnttab_request_version(); max_nr_gframes = gnttab_max_grant_frames(); if (max_nr_gframes < nr_grant_frames) return -ENOSYS; @@ -1160,6 +1161,12 @@ int gnttab_resume(void) return 0; } +int gnttab_resume(void) +{ + gnttab_request_version(); + return gnttab_setup(); +} + int gnttab_suspend(void) { gnttab_interface->unmap_frames(); @@ -1171,9 +1178,10 @@ static int gnttab_expand(unsigned int req_entries) int rc; unsigned int cur, extra; + BUG_ON(grefs_per_grant_frame == 0); cur = nr_grant_frames; - extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) / - GREFS_PER_GRANT_FRAME); + extra = ((req_entries + (grefs_per_grant_frame-1)) / + grefs_per_grant_frame); if (cur + extra > gnttab_max_grant_frames()) return -ENOSPC; @@ -1191,21 +1199,23 @@ int gnttab_init(void) unsigned int nr_init_grefs; int ret; + gnttab_request_version(); nr_grant_frames = 1; boot_max_nr_grant_frames = __max_nr_grant_frames(); /* Determine the maximum number of frames required for the * grant reference free list on the current hypervisor. */ + BUG_ON(grefs_per_grant_frame == 0); max_nr_glist_frames = (boot_max_nr_grant_frames * - GREFS_PER_GRANT_FRAME / RPP); + grefs_per_grant_frame / RPP); gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *), GFP_KERNEL); if (gnttab_list == NULL) return -ENOMEM; - nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP; for (i = 0; i < nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL); if (gnttab_list[i] == NULL) { @@ -1214,12 +1224,12 @@ int gnttab_init(void) } } - if (gnttab_resume() < 0) { + if (gnttab_setup() < 0) { ret = -ENODEV; goto ini_nomem; } - nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME; + nr_init_grefs = nr_grant_frames * grefs_per_grant_frame; for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++) gnttab_entry(i) = i + 1; -- cgit v0.10.2 From e5c702d3b268066dc70d619ecff06a08065f343f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 15 Jan 2013 13:31:43 +0000 Subject: Xen: properly bound buffer access when parsing cpu/*/availability At the same time reduce the local buffers to 16 bytes each. Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c index 4dcfced..084041d 100644 --- a/drivers/xen/cpu_hotplug.c +++ b/drivers/xen/cpu_hotplug.c @@ -25,10 +25,10 @@ static void disable_hotplug_cpu(int cpu) static int vcpu_online(unsigned int cpu) { int err; - char dir[32], state[32]; + char dir[16], state[16]; sprintf(dir, "cpu/%u", cpu); - err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state); + err = xenbus_scanf(XBT_NIL, dir, "availability", "%15s", state); if (err != 1) { if (!xen_initial_domain()) printk(KERN_ERR "XENBUS: Unable to read cpu state\n"); -- cgit v0.10.2 From 99beae6cb8f4dd5dab81a370b79c3b1085848d89 Mon Sep 17 00:00:00 2001 From: Andres Lagar-Cavilla Date: Mon, 14 Jan 2013 22:35:40 -0500 Subject: xen/privcmd: Fix mmap batch ioctl. 1. If any individual mapping error happens, the V1 case will mark *all* operations as failed. Fixed. 2. The err_array was allocated with kcalloc, resulting in potentially O(n) page allocations. Refactor code to not use this array. Signed-off-by: Andres Lagar-Cavilla Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 421375a..ca2b00e 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -258,11 +258,12 @@ struct mmap_batch_state { * -ENOENT if at least 1 -ENOENT has happened. */ int global_error; - /* An array for individual errors */ - int *err; + int version; /* User-space mfn array to store errors in the second pass for V1. */ xen_pfn_t __user *user_mfn; + /* User-space int array to store errors in the second pass for V2. */ + int __user *user_err; }; /* auto translated dom0 note: if domU being created is PV, then mfn is @@ -285,7 +286,19 @@ static int mmap_batch_fn(void *data, void *state) &cur_page); /* Store error code for second pass. */ - *(st->err++) = ret; + if (st->version == 1) { + if (ret < 0) { + /* + * V1 encodes the error codes in the 32bit top nibble of the + * mfn (with its known limitations vis-a-vis 64 bit callers). + */ + *mfnp |= (ret == -ENOENT) ? + PRIVCMD_MMAPBATCH_PAGED_ERROR : + PRIVCMD_MMAPBATCH_MFN_ERROR; + } + } else { /* st->version == 2 */ + *((int *) mfnp) = ret; + } /* And see if it affects the global_error. */ if (ret < 0) { @@ -302,20 +315,25 @@ static int mmap_batch_fn(void *data, void *state) return 0; } -static int mmap_return_errors_v1(void *data, void *state) +static int mmap_return_errors(void *data, void *state) { - xen_pfn_t *mfnp = data; struct mmap_batch_state *st = state; - int err = *(st->err++); - /* - * V1 encodes the error codes in the 32bit top nibble of the - * mfn (with its known limitations vis-a-vis 64 bit callers). - */ - *mfnp |= (err == -ENOENT) ? - PRIVCMD_MMAPBATCH_PAGED_ERROR : - PRIVCMD_MMAPBATCH_MFN_ERROR; - return __put_user(*mfnp, st->user_mfn++); + if (st->version == 1) { + xen_pfn_t mfnp = *((xen_pfn_t *) data); + if (mfnp & PRIVCMD_MMAPBATCH_MFN_ERROR) + return __put_user(mfnp, st->user_mfn++); + else + st->user_mfn++; + } else { /* st->version == 2 */ + int err = *((int *) data); + if (err) + return __put_user(err, st->user_err++); + else + st->user_err++; + } + + return 0; } /* Allocate pfns that are then mapped with gmfns from foreign domid. Update @@ -354,7 +372,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) struct vm_area_struct *vma; unsigned long nr_pages; LIST_HEAD(pagelist); - int *err_array = NULL; struct mmap_batch_state state; switch (version) { @@ -390,10 +407,12 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) goto out; } - err_array = kcalloc(m.num, sizeof(int), GFP_KERNEL); - if (err_array == NULL) { - ret = -ENOMEM; - goto out; + if (version == 2) { + /* Zero error array now to only copy back actual errors. */ + if (clear_user(m.err, sizeof(int) * m.num)) { + ret = -EFAULT; + goto out; + } } down_write(&mm->mmap_sem); @@ -421,7 +440,7 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) state.va = m.addr; state.index = 0; state.global_error = 0; - state.err = err_array; + state.version = version; /* mmap_batch_fn guarantees ret == 0 */ BUG_ON(traverse_pages(m.num, sizeof(xen_pfn_t), @@ -429,21 +448,14 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) up_write(&mm->mmap_sem); - if (version == 1) { - if (state.global_error) { - /* Write back errors in second pass. */ - state.user_mfn = (xen_pfn_t *)m.arr; - state.err = err_array; - ret = traverse_pages(m.num, sizeof(xen_pfn_t), - &pagelist, mmap_return_errors_v1, &state); - } else - ret = 0; - - } else if (version == 2) { - ret = __copy_to_user(m.err, err_array, m.num * sizeof(int)); - if (ret) - ret = -EFAULT; - } + if (state.global_error) { + /* Write back errors in second pass. */ + state.user_mfn = (xen_pfn_t *)m.arr; + state.user_err = m.err; + ret = traverse_pages(m.num, sizeof(xen_pfn_t), + &pagelist, mmap_return_errors, &state); + } else + ret = 0; /* If we have not had any EFAULT-like global errors then set the global * error to -ENOENT if necessary. */ @@ -451,7 +463,6 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) ret = -ENOENT; out: - kfree(err_array); free_page_list(&pagelist); return ret; -- cgit v0.10.2 From 2512f298cb9886e06938e761c9e924c8448d9ab8 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:11 +0000 Subject: xen/gntdev: fix unsafe vma access In gntdev_ioctl_get_offset_for_vaddr, we need to hold mmap_sem while calling find_vma() to avoid potentially having the result freed out from under us. Similarly, the MMU notifier functions need to synchronize with gntdev_vma_close to avoid map->vma being freed during their iteration. Signed-off-by: Daniel De Graaf Reported-by: Al Viro Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 2e22df2..cca62cc8 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -378,7 +378,20 @@ static void gntdev_vma_close(struct vm_area_struct *vma) struct grant_map *map = vma->vm_private_data; pr_debug("gntdev_vma_close %p\n", vma); - map->vma = NULL; + if (use_ptemod) { + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; + /* It is possible that an mmu notifier could be running + * concurrently, so take priv->lock to ensure that the vma won't + * vanishing during the unmap_grant_pages call, since we will + * spin here until that completes. Such a concurrent call will + * not do any unmapping, since that has been done prior to + * closing the vma, but it may still iterate the unmap_ops list. + */ + spin_lock(&priv->lock); + map->vma = NULL; + spin_unlock(&priv->lock); + } vma->vm_private_data = NULL; gntdev_put_map(map); } @@ -579,25 +592,31 @@ static long gntdev_ioctl_get_offset_for_vaddr(struct gntdev_priv *priv, struct ioctl_gntdev_get_offset_for_vaddr op; struct vm_area_struct *vma; struct grant_map *map; + int rv = -EINVAL; if (copy_from_user(&op, u, sizeof(op)) != 0) return -EFAULT; pr_debug("priv %p, offset for vaddr %lx\n", priv, (unsigned long)op.vaddr); + down_read(¤t->mm->mmap_sem); vma = find_vma(current->mm, op.vaddr); if (!vma || vma->vm_ops != &gntdev_vmops) - return -EINVAL; + goto out_unlock; map = vma->vm_private_data; if (!map) - return -EINVAL; + goto out_unlock; op.offset = map->index << PAGE_SHIFT; op.count = map->count; + rv = 0; - if (copy_to_user(u, &op, sizeof(op)) != 0) + out_unlock: + up_read(¤t->mm->mmap_sem); + + if (rv == 0 && copy_to_user(u, &op, sizeof(op)) != 0) return -EFAULT; - return 0; + return rv; } static long gntdev_ioctl_notify(struct gntdev_priv *priv, void __user *u) -- cgit v0.10.2 From 16a1d0225e22e4e273e6b60a21db95decde666c2 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 22:57:12 +0000 Subject: xen/gntdev: correctly unmap unlinked maps in mmu notifier If gntdev_ioctl_unmap_grant_ref is called on a range before unmapping it, the entry is removed from priv->maps and the later call to mn_invl_range_start won't find it to do the unmapping. Fix this by creating another list of freeable maps that the mmu notifier can search and use to unmap grants. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index cca62cc8..9be3e5e 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -56,10 +56,15 @@ MODULE_PARM_DESC(limit, "Maximum number of grants that may be mapped by " static atomic_t pages_mapped = ATOMIC_INIT(0); static int use_ptemod; +#define populate_freeable_maps use_ptemod struct gntdev_priv { + /* maps with visible offsets in the file descriptor */ struct list_head maps; - /* lock protects maps from concurrent changes */ + /* maps that are not visible; will be freed on munmap. + * Only populated if populate_freeable_maps == 1 */ + struct list_head freeable_maps; + /* lock protects maps and freeable_maps */ spinlock_t lock; struct mm_struct *mm; struct mmu_notifier mn; @@ -193,7 +198,7 @@ static struct grant_map *gntdev_find_map_index(struct gntdev_priv *priv, return NULL; } -static void gntdev_put_map(struct grant_map *map) +static void gntdev_put_map(struct gntdev_priv *priv, struct grant_map *map) { if (!map) return; @@ -208,6 +213,12 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } + if (populate_freeable_maps && priv) { + spin_lock(&priv->lock); + list_del(&map->next); + spin_unlock(&priv->lock); + } + if (map->pages && !use_ptemod) unmap_grant_pages(map, 0, map->count); gntdev_free_map(map); @@ -376,11 +387,11 @@ static void gntdev_vma_open(struct vm_area_struct *vma) static void gntdev_vma_close(struct vm_area_struct *vma) { struct grant_map *map = vma->vm_private_data; + struct file *file = vma->vm_file; + struct gntdev_priv *priv = file->private_data; pr_debug("gntdev_vma_close %p\n", vma); if (use_ptemod) { - struct file *file = vma->vm_file; - struct gntdev_priv *priv = file->private_data; /* It is possible that an mmu notifier could be running * concurrently, so take priv->lock to ensure that the vma won't * vanishing during the unmap_grant_pages call, since we will @@ -393,7 +404,7 @@ static void gntdev_vma_close(struct vm_area_struct *vma) spin_unlock(&priv->lock); } vma->vm_private_data = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); } static struct vm_operations_struct gntdev_vmops = { @@ -403,33 +414,43 @@ static struct vm_operations_struct gntdev_vmops = { /* ------------------------------------------------------------------ */ +static void unmap_if_in_range(struct grant_map *map, + unsigned long start, unsigned long end) +{ + unsigned long mstart, mend; + int err; + + if (!map->vma) + return; + if (map->vma->vm_start >= end) + return; + if (map->vma->vm_end <= start) + return; + mstart = max(start, map->vma->vm_start); + mend = min(end, map->vma->vm_end); + pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end, + start, end, mstart, mend); + err = unmap_grant_pages(map, + (mstart - map->vma->vm_start) >> PAGE_SHIFT, + (mend - mstart) >> PAGE_SHIFT); + WARN_ON(err); +} + static void mn_invl_range_start(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long start, unsigned long end) { struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn); struct grant_map *map; - unsigned long mstart, mend; - int err; spin_lock(&priv->lock); list_for_each_entry(map, &priv->maps, next) { - if (!map->vma) - continue; - if (map->vma->vm_start >= end) - continue; - if (map->vma->vm_end <= start) - continue; - mstart = max(start, map->vma->vm_start); - mend = min(end, map->vma->vm_end); - pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", - map->index, map->count, - map->vma->vm_start, map->vma->vm_end, - start, end, mstart, mend); - err = unmap_grant_pages(map, - (mstart - map->vma->vm_start) >> PAGE_SHIFT, - (mend - mstart) >> PAGE_SHIFT); - WARN_ON(err); + unmap_if_in_range(map, start, end); + } + list_for_each_entry(map, &priv->freeable_maps, next) { + unmap_if_in_range(map, start, end); } spin_unlock(&priv->lock); } @@ -458,6 +479,15 @@ static void mn_release(struct mmu_notifier *mn, err = unmap_grant_pages(map, /* offset */ 0, map->count); WARN_ON(err); } + list_for_each_entry(map, &priv->freeable_maps, next) { + if (!map->vma) + continue; + pr_debug("map %d+%d (%lx %lx)\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end); + err = unmap_grant_pages(map, /* offset */ 0, map->count); + WARN_ON(err); + } spin_unlock(&priv->lock); } @@ -479,6 +509,7 @@ static int gntdev_open(struct inode *inode, struct file *flip) return -ENOMEM; INIT_LIST_HEAD(&priv->maps); + INIT_LIST_HEAD(&priv->freeable_maps); spin_lock_init(&priv->lock); if (use_ptemod) { @@ -513,8 +544,9 @@ static int gntdev_release(struct inode *inode, struct file *flip) while (!list_empty(&priv->maps)) { map = list_entry(priv->maps.next, struct grant_map, next); list_del(&map->next); - gntdev_put_map(map); + gntdev_put_map(NULL /* already removed */, map); } + WARN_ON(!list_empty(&priv->freeable_maps)); if (use_ptemod) mmu_notifier_unregister(&priv->mn, priv->mm); @@ -542,14 +574,14 @@ static long gntdev_ioctl_map_grant_ref(struct gntdev_priv *priv, if (unlikely(atomic_add_return(op.count, &pages_mapped) > limit)) { pr_debug("can't map: over limit\n"); - gntdev_put_map(map); + gntdev_put_map(NULL, map); return err; } if (copy_from_user(map->grants, &u->refs, sizeof(map->grants[0]) * op.count) != 0) { - gntdev_put_map(map); - return err; + gntdev_put_map(NULL, map); + return -EFAULT; } spin_lock(&priv->lock); @@ -578,11 +610,13 @@ static long gntdev_ioctl_unmap_grant_ref(struct gntdev_priv *priv, map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count); if (map) { list_del(&map->next); + if (populate_freeable_maps) + list_add_tail(&map->next, &priv->freeable_maps); err = 0; } spin_unlock(&priv->lock); if (map) - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } @@ -797,7 +831,7 @@ out_unlock_put: out_put_map: if (use_ptemod) map->vma = NULL; - gntdev_put_map(map); + gntdev_put_map(priv, map); return err; } -- cgit v0.10.2 From 1affa98d23c0188fdd4433512489be753a25bb23 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 2 Jan 2013 17:57:13 -0500 Subject: xen/gntdev: remove erronous use of copy_to_user Since there is now a mapping of granted pages in kernel address space in both PV and HVM, use it for UNMAP_NOTIFY_CLEAR_BYTE instead of accessing memory via copy_to_user and triggering sleep-in-atomic warnings. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 9be3e5e..3c8803f 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -312,17 +312,10 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) { int pgno = (map->notify.addr >> PAGE_SHIFT); - if (pgno >= offset && pgno < offset + pages && use_ptemod) { - void __user *tmp = (void __user *) - map->vma->vm_start + map->notify.addr; - err = copy_to_user(tmp, &err, 1); - if (err) - return -EFAULT; - map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; - } else if (pgno >= offset && pgno < offset + pages) { - uint8_t *tmp = kmap(map->pages[pgno]); + if (pgno >= offset && pgno < offset + pages) { + /* No need for kmap, pages are in lowmem */ + uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno])); tmp[map->notify.addr & (PAGE_SIZE-1)] = 0; - kunmap(map->pages[pgno]); map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE; } } -- cgit v0.10.2 From a6833214cfc6fa8a7c59426af77794cc190c6cfc Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Thu, 13 Dec 2012 14:27:43 +0100 Subject: mxs: uart: fix setting RTS from software With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the mainline mxs-uart driver now sets RTSEN only when hardware flow control is enabled via software. It is not possible any longer to set RTS manually via software. However, the manual modification is a valid operation. Regain the possibility to set RTS via software and only set RTSEN when hardware flow control is explicitly enabled via settermios cflag CRTSCTS. Signed-off-by: Steffen Trumtrar Cc: stable Reviewed-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6db23b0..9f63f88 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTSEN; + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { if (tty_port_cts_enabled(&u->state->port)) ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; } s->ctrl = mctrl; -- cgit v0.10.2 From 87b8bed2ce9394870a87e4fb2aef6752b2bd837d Mon Sep 17 00:00:00 2001 From: "fabio.estevam@freescale.com" Date: Mon, 7 Jan 2013 23:11:06 -0200 Subject: serial: mxs-auart: Index is unsigned Fix the following warning when building with W=1 option: drivers/tty/serial/mxs-auart.c: In function 'mxs_auart_tx_chars': drivers/tty/serial/mxs-auart.c:272:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 9f63f88..e55615e 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) struct circ_buf *xmit = &s->port.state->xmit; if (auart_dma_enabled(s)) { - int i = 0; + u32 i = 0; int size; void *buffer = s->tx_dma_buf; -- cgit v0.10.2 From a6dd114e16cbc4410049a90a8a67b967333d108d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Dec 2012 05:10:44 -0500 Subject: tty: serial: vt8500: fix return value check in vt8500_serial_probe() In case of error, function of_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Acked-by: Tony Prisk Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 8fd1814..d5ed9f6 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); - if (vt8500_port->clk) { + if (!IS_ERR(vt8500_port->clk)) { vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); } else { /* use the default of 24Mhz if not specified and warn */ -- cgit v0.10.2 From 4f7d67d0de0f0728ed258426a62ab555191cdfc8 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:58 -0600 Subject: tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26b9dc0..bf2f1a0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2246,7 +2246,7 @@ static struct pciserial_board pci_boards[] = { [pbn_b0_8_1152000_200] = { .flags = FL_BASE0, - .num_ports = 2, + .num_ports = 8, .base_baud = 1152000, .uart_offset = 0x200, }, -- cgit v0.10.2 From b7b9041b208d09c114d9d30ff1b7f860b7765f45 Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Thu, 6 Dec 2012 22:19:59 -0600 Subject: tty/8250: The correct device id for this card is 0x0022 The correct device id for this card is 0x0022 Signed-off-by: Matt Schulte Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index bf2f1a0..8a2c3d9 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1301,9 +1301,9 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 #define PCI_VENDOR_ID_ASIX 0x9710 -#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019 #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ -- cgit v0.10.2 From 014b9b4ce84281ccb3d723c792bed19815f3571a Mon Sep 17 00:00:00 2001 From: chao bi Date: Wed, 12 Dec 2012 11:40:56 +0800 Subject: serial:ifx6x60:Delete SPI timer when shut down port When shut down SPI port, it's possible that MRDY has been asserted and a SPI timer was activated waiting for SRDY assert, in the case, it needs to delete this timer. Signed-off-by: Chen Jun Signed-off-by: channing Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 675d94a..7eed323 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port) clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); mrdy_set_low(ifx_dev); + del_timer(&ifx_dev->spi_timer); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); tasklet_kill(&ifx_dev->io_work_tasklet); } -- cgit v0.10.2 From d55bf532d72b3cfdfe84e696ace995067324c96c Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 15 Jan 2013 22:40:26 -0500 Subject: Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic." This reverts commit 41bd956de3dfdc3a43708fe2e0c8096c69064a1e. The fix is incorrect and not appropiate for the latest kernels. In fact it _causes_ the BUG: scheduling while atomic while doing vCPU hotplug. Suggested-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 4f7d259..34bc4ce 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -432,13 +432,6 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); cpu_bringup(); - /* - * Balance out the preempt calls - as we are running in cpu_idle - * loop which has been called at bootup from cpu_bringup_and_idle. - * The cpucpu_bringup_and_idle called cpu_bringup which made a - * preempt_disable() So this preempt_enable will balance it out. - */ - preempt_enable(); } #else /* !CONFIG_HOTPLUG_CPU */ -- cgit v0.10.2 From 2eaa865ffd66ca2e5a841e8c756d75f89e3482ae Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Mon, 31 Dec 2012 13:42:45 -0800 Subject: serial: samsung: remove redundant setting of line config during port reset The setting of uart line control configuration in s3c24xx_serial_resetport is can be removed since the 'set_termios' call will overwrite any ULCON register setting which s3c24xx_serial_resetport does. Acked-by: Kukjin Kim Signed-off-by: Thomas Abraham Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12e5249..e514b3a 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); -- cgit v0.10.2 From 68e56cb3a068f9c30971c6117fbbd1e32918e49e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jan 2013 20:09:26 +0100 Subject: tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler Signed-off-by: Maxime Ripard Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1d0dba2..096d2ef 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p) } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { /* Clear the USR and write the LCR again. */ (void)p->serial_in(p, UART_USR); - p->serial_out(p, d->last_lcr, UART_LCR); + p->serial_out(p, UART_LCR, d->last_lcr); return 1; } -- cgit v0.10.2 From 5dd070d21e2cb34b4162d564d73cca3591f94389 Mon Sep 17 00:00:00 2001 From: channing Date: Wed, 16 Jan 2013 13:14:20 +0800 Subject: serial:ifx6x60:Keep word size accordance with SPI controller As protocol driver, IFX SPI driver initiate to setup SPI master with default SPI word size as 16 bit/word, however, SPI master may not adopt this default value due to SPI controller's capability, it might choose an available value by itself and set it to spi_device.bits_per_word. In order to keep align with Controller, IFX driver should make use of this value during SPI transfer, but the default one. Signed-off-by: Chen Jun Signed-off-by: channing Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 7eed323..8cb6d8d 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -811,7 +811,8 @@ static void ifx_spi_io(unsigned long data) ifx_dev->spi_xfer.cs_change = 0; ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_bpw; + ifx_dev->spi_xfer.bits_per_word = + ifx_dev->spi_dev->bits_per_word; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; -- cgit v0.10.2 From f30d26e468322b50d5e376bec40658683aff8ece Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 16 Jan 2013 10:53:40 +0200 Subject: drm/i915/eDP: do not write power sequence registers for ghost eDP Some machines detect an eDP port even if it's not really there, and eDP initialization has a fail path for this. Typically such machines have an LVDS display instead. A regression introduced in commit 82ed61fa1a4e08d5f9e86fb1b715b50ed678b6ac Author: Daniel Vetter Date: Sat Oct 20 20:57:41 2012 +0200 drm/i915: make edp panel power sequence setup more robust updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS, and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display. Split the power sequencer initialization into two, delaying the register updates until after we know the eDP is real. Note: Keep the PP_CONTROL unlocking in the first part, even if it does not update registers, per the commit message of the above mentioned commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601 Reported-and-tested-by: Ryan Coe Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1b63d55..fb3715b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2579,7 +2579,8 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, - struct intel_dp *intel_dp) + struct intel_dp *intel_dp, + struct edp_power_seq *out) { struct drm_i915_private *dev_priv = dev->dev_private; struct edp_power_seq cur, vbt, spec, final; @@ -2650,16 +2651,35 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, intel_dp->panel_power_cycle_delay = get_delay(t11_t12); #undef get_delay + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + if (out) + *out = final; +} + +static void +intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, + struct intel_dp *intel_dp, + struct edp_power_seq *seq) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_on, pp_off, pp_div; + /* And finally store the new values in the power sequencer. */ - pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | - (final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT); - pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | - (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT); + pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | + (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); /* Compute the divisor for the pp clock, simply match the Bspec * formula. */ pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; - pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000) + pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) << PANEL_POWER_CYCLE_DELAY_SHIFT); /* Haswell doesn't have any port selection bits for the panel @@ -2675,14 +2695,6 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, I915_WRITE(PCH_PP_OFF_DELAYS, pp_off); I915_WRITE(PCH_PP_DIVISOR, pp_div); - - DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", - intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, - intel_dp->panel_power_cycle_delay); - - DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", - intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", I915_READ(PCH_PP_ON_DELAYS), I915_READ(PCH_PP_OFF_DELAYS), @@ -2699,6 +2711,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; + struct edp_power_seq power_seq = { 0 }; enum port port = intel_dig_port->port; const char *name = NULL; int type; @@ -2771,7 +2784,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, } if (is_edp(intel_dp)) - intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); intel_dp_i2c_init(intel_dp, intel_connector, name); @@ -2798,6 +2811,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, return; } + /* We now know it's not a ghost, init power sequence regs. */ + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + ironlake_edp_panel_vdd_on(intel_dp); edid = drm_get_edid(connector, &intel_dp->adapter); if (edid) { -- cgit v0.10.2 From 262b6d363fcff16359c93bd58c297f961f6e6273 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 15 Jan 2013 16:17:54 +0000 Subject: drm/i915: Invalidate the relocation presumed_offsets along the slow path In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4 Author: Chris Wilson Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index d6a994a..26d08bb 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -539,6 +539,8 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, total = 0; for (i = 0; i < count; i++) { struct drm_i915_gem_relocation_entry __user *user_relocs; + u64 invalid_offset = (u64)-1; + int j; user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr; @@ -549,6 +551,25 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, goto err; } + /* As we do not update the known relocation offsets after + * relocating (due to the complexities in lock handling), + * we need to mark them as invalid now so that we force the + * relocation processing next time. Just in case the target + * object is evicted and then rebound into its old + * presumed_offset before the next execbuffer - if that + * happened we would make the mistake of assuming that the + * relocations were valid. + */ + for (j = 0; j < exec[i].relocation_count; j++) { + if (copy_to_user(&user_relocs[j].presumed_offset, + &invalid_offset, + sizeof(invalid_offset))) { + ret = -EFAULT; + mutex_lock(&dev->struct_mutex); + goto err; + } + } + reloc_offset[i] = total; total += exec[i].relocation_count; } -- cgit v0.10.2 From f32ca3db7f0b05a88edf37ccb00e262290a213e7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 17 Jan 2013 00:33:36 +0900 Subject: regmap: debugfs: Fix seeking from the cache We don't want to bomb out early if we failed to get the cache any more, just soldier on instead and we won't get confused and always return the first block. Reported-by: Philipp Zabel diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 46a213a..d9a6c94 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -121,8 +121,6 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map, c->max = p - 1; list_add_tail(&c->list, &map->debugfs_off_cache); - } else { - return base; } /* -- cgit v0.10.2 From 568dca15aa2a0f4ddee255894ec393a159f13147 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 14 Jan 2013 19:50:42 +0100 Subject: ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone Patrik Kluba reports that the preempt count becomes invalid due to the preempt_enable() call being unbalanced with a preempt_disable() call in the vfp assembly routines. This happens because preempt_enable() and preempt_disable() update preempt counts under PREEMPT_COUNT=y but the vfp assembly routines do so under PREEMPT=y. In a configuration where PREEMPT=n and DEBUG_ATOMIC_SLEEP=y, PREEMPT_COUNT=y and so the preempt_enable() call in VFP_bounce() keeps subtracting from the preempt count until it goes negative. Fix this by always using PREEMPT_COUNT to decided when to update preempt counts in the ARM assembly code. Signed-off-by: Stephen Boyd Reported-by: Patrik Kluba Tested-by: Patrik Kluba Cc: # 2.6.30 Signed-off-by: Russell King diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index cc926c9..323ce1a 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,7 +22,7 @@ @ IRQs disabled. @ ENTRY(do_vfp) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT ldr r4, [r10, #TI_PREEMPT] @ get preempt count add r11, r4, #1 @ increment it str r11, [r10, #TI_PREEMPT] @@ -35,7 +35,7 @@ ENTRY(do_vfp) ENDPROC(do_vfp) ENTRY(vfp_null_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry) __INIT ENTRY(vfp_testing_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index ea0349f..dd5e56f 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -168,7 +168,7 @@ vfp_hw_state_valid: @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -192,7 +192,7 @@ look_for_VFP_exceptions: @ not recognised by VFP DBGSTR "not VFP" -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it -- cgit v0.10.2 From 6f16f4998f98e42e3f2dedf663cfb691ff0324af Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 15 Jan 2013 18:51:32 +0100 Subject: ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area We currently use a temporary 1MB section aligned to a 1MB boundary for mapping the provided device tree until the final page table is created. However, if the device tree happens to cross that 1MB boundary, the end of it remains unmapped and the kernel crashes when it attempts to access it. Given no restriction on the location of that DTB, it could end up with only a few bytes mapped at the end of a section. Solve this issue by mapping two consecutive sections. Signed-off-by: Nicolas Pitre Tested-by: Sascha Hauer Tested-by: Tomasz Figa Cc: stable@vger.kernel.org Signed-off-by: Russell King diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4eee351..61fcb18 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -246,6 +246,7 @@ __create_page_tables: /* * Then map boot params address in r2 if specified. + * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -253,6 +254,8 @@ __create_page_tables: addne r3, r3, #PAGE_OFFSET addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orrne r6, r7, r0 + strne r6, [r3], #1 << PMD_ORDER + addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] #ifdef CONFIG_DEBUG_LL -- cgit v0.10.2 From 1bea07f16da0d77689cda7abe73939dd1dfdea22 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 14 Jan 2013 19:53:54 +0100 Subject: ARM: sunxi: Use the Synosys APB UART instead of ns8250 The UART controller used in the A10/A13 is the Synopsys DesignWare 8250. The wrong use of a regular 8250 driver may lead to a oops during kernel boot with "irq 17: nobody cared", because the apb UART as an extra interrupt that gets raised when writing to the LCR when busy. Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bf..8b36abe 100644 --- a/arch/arm/boot/dts/sunxi.dtsi +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; -- cgit v0.10.2 From 9174adbee4a9a49d0139f5d71969852b36720809 Mon Sep 17 00:00:00 2001 From: Andrew Cooper Date: Wed, 16 Jan 2013 12:00:55 +0000 Subject: xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. This fixes CVE-2013-0190 / XSA-40 There has been an error on the xen_failsafe_callback path for failed iret, which causes the stack pointer to be wrong when entering the iret_exc error path. This can result in the kernel crashing. In the classic kernel case, the relevant code looked a little like: popl %eax # Error code from hypervisor jz 5f addl $16,%esp jmp iret_exc # Hypervisor said iret fault 5: addl $16,%esp # Hypervisor said segment selector fault Here, there are two identical addls on either option of a branch which appears to have been optimised by hoisting it above the jz, and converting it to an lea, which leaves the flags register unaffected. In the PVOPS case, the code looks like: popl_cfi %eax # Error from the hypervisor lea 16(%esp),%esp # Add $16 before choosing fault path CFI_ADJUST_CFA_OFFSET -16 jz 5f addl $16,%esp # Incorrectly adjust %esp again jmp iret_exc It is possible unprivileged userspace applications to cause this behaviour, for example by loading an LDT code selector, then changing the code selector to be not-present. At this point, there is a race condition where it is possible for the hypervisor to return back to userspace from an interrupt, fault on its own iret, and inject a failsafe_callback into the kernel. This bug has been present since the introduction of Xen PVOPS support in commit 5ead97c84 (xen: Core Xen implementation), in 2.6.23. Signed-off-by: Frediano Ziglio Signed-off-by: Andrew Cooper Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 88b725a..cf8639b 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1084,7 +1084,6 @@ ENTRY(xen_failsafe_callback) lea 16(%esp),%esp CFI_ADJUST_CFA_OFFSET -16 jz 5f - addl $16,%esp jmp iret_exc 5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL -- cgit v0.10.2 From a73b59c51ab288d81b515b504790267f594884b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 16 Jan 2013 15:32:06 +0100 Subject: ARM: compile fix for DEBUG_LL=y && MMU=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König Reviewed-by: Stephen Warren Acked-by: Rob Herring Signed-off-by: Olof Johansson diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 6809200..14f7c3b 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else -- cgit v0.10.2 From c0d6cfd3007c16f03b74bfc5ab80d8ab47402fff Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 9 Jan 2013 17:13:23 -0800 Subject: ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 7feb426..d2e1a16 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void) for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++) pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false); +#ifdef CONFIG_S3C_DEV_FB if (dev_get_platdata(&s3c_device_fb.dev)) pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev); +#endif return 0; } -- cgit v0.10.2 From 753bd6ddf4802ce4b985890fb70ff4997a70afb8 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Wed, 16 Jan 2013 15:41:01 -0800 Subject: ARM: dts: correct the dw-mshc timing properties as per binding As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar Tested-by: Doug Anderson Acked-by: Doug Anderson Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index fddd174..46c0980 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d576..e05b18f 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; -- cgit v0.10.2 From b86dc0d8c12bbb9fed3f392c284bdc7114ce00c1 Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Wed, 16 Jan 2013 15:49:53 -0800 Subject: ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 553059f..755c0bb 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = S3C_EINT(5), + .irq = S3C_EINT(4), .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, -- cgit v0.10.2 From e6b267ce14f61d9da0151b97ee26ab4d38055567 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 16 Jan 2013 10:58:41 -0200 Subject: video: imxfb: Do not crash on reboot Issuing a "reboot" command after the LCD times out causes the following warnings: Requesting system reboot ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_disable+0x24/0x50) [] (clk_disable+0x24/0x50) from [] (imxfb_disable_controller+0x48/0x7c) [] (imxfb_disable_controller+0x48/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c854f ]--- ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (clk_unprepare+0x1c/0x2c) [] (clk_unprepare+0x1c/0x2c) from [] (imxfb_disable_controller+0x50/0x7c) [] (imxfb_disable_controller+0x50/0x7c) from [] (platform_drv_shutdown+0x18/0x1c) [] (platform_drv_shutdown+0x18/0x1c) from [] (device_shutdown+0x48/0x14c) [] (device_shutdown+0x48/0x14c) from [] (kernel_restart_prepare+0x2c/0x3c) [] (kernel_restart_prepare+0x2c/0x3c) from [] (kernel_restart+0xc/0x48) [] (kernel_restart+0xc/0x48) from [] (sys_reboot+0xc0/0x1bc) [] (sys_reboot+0xc0/0x1bc) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c8550 ]--- ------------[ cut here ]------------ This happens because "reboot" triggers imxfb_shutdown(), which calls imxfb_disable_controller with the clocks already disabled. To prevent this, add a clock enabled status so that we can check if the clocks are enabled before disabling them. Acked-by: Sascha Hauer Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 8435c5d..609f4e9 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -139,6 +139,7 @@ struct imxfb_info { struct clk *clk_ahb; struct clk *clk_per; enum imxfb_type devtype; + bool enabled; /* * These are the addresses we mapped @@ -536,6 +537,10 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi) static void imxfb_enable_controller(struct imxfb_info *fbi) { + + if (fbi->enabled) + return; + pr_debug("Enabling LCD controller\n"); writel(fbi->screen_dma, fbi->regs + LCDC_SSA); @@ -556,6 +561,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) clk_prepare_enable(fbi->clk_ipg); clk_prepare_enable(fbi->clk_ahb); clk_prepare_enable(fbi->clk_per); + fbi->enabled = true; if (fbi->backlight_power) fbi->backlight_power(1); @@ -565,6 +571,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) static void imxfb_disable_controller(struct imxfb_info *fbi) { + if (!fbi->enabled) + return; + pr_debug("Disabling LCD controller\n"); if (fbi->backlight_power) @@ -575,6 +584,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) clk_disable_unprepare(fbi->clk_per); clk_disable_unprepare(fbi->clk_ipg); clk_disable_unprepare(fbi->clk_ahb); + fbi->enabled = false; writel(0, fbi->regs + LCDC_RMCR); } -- cgit v0.10.2 From e4a5da51daddf104183b42995411e2496832de1d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:11:10 -0800 Subject: gpio: samsung: fix pinctrl condition for exynos and exynos5440 Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG, it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work for supporting pinctrl on most Samsung SoCs including S3C, S5P as well except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 9070f86..713ec8c 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3009,7 +3009,7 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#ifdef CONFIG_PINCTRL_SAMSUNG +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) /* * This gpio driver includes support for device tree support and there * are platforms using it. In order to maintain compatibility with those -- cgit v0.10.2 From dcb9c3491acd63396f51dd1daf29851a5f92f632 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 27 Dec 2012 10:12:30 -0800 Subject: gpio: samsung: silent build warning for EXYNOS5 SoCs This patch fixes following warning: drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable] Because current gpio-samsung is valid only on EXYNOS5250. Cc: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 713ec8c..c1f6bc2 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -445,7 +445,7 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { }; #endif -#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_SOC_EXYNOS5250) static struct samsung_gpio_cfg exynos_gpio_cfg = { .set_pull = exynos_gpio_setpull, .get_pull = exynos_gpio_getpull, @@ -2445,7 +2445,7 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_1[] = { { .chip = { @@ -2613,7 +2613,7 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_2[] = { { .chip = { @@ -2674,7 +2674,7 @@ static struct samsung_gpio_chip exynos5_gpios_2[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_3[] = { { .chip = { @@ -2710,7 +2710,7 @@ static struct samsung_gpio_chip exynos5_gpios_3[] = { }; #endif -#ifdef CONFIG_ARCH_EXYNOS5 +#ifdef CONFIG_SOC_EXYNOS5250 static struct samsung_gpio_chip exynos5_gpios_4[] = { { .chip = { -- cgit v0.10.2 From b514407547890686572606c9dfa4b7f832db9958 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 17 Jan 2013 10:24:09 +0200 Subject: drm/i915: fix FORCEWAKE posting reads We stopped reading FORCEWAKE for posting reads in commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd Author: Ben Widawsky Date: Sat Sep 1 22:59:50 2012 -0700 drm/i915: Never read FORCEWAKE and started using something from the same cacheline instead. On the bug reporter's machine this broke entering rc6 states after a suspend/resume cycle. It turns out reading ECOBUS as posting read worked fine, while GTFIFODBG did not, preventing RC6 states after suspend/resume per the bug report referenced below. It's not entirely clear why, but clearly GTFIFODBG was nowhere near the same cacheline or address range as FORCEWAKE. Trying out various registers for posting reads showed that all tested registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true work. Conversely, most (but not quite all) registers for which NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced bug. Based on the above, add posting reads on ECOBUS where GTFIFODBG was previously relied on. In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same address range as FORCEWAKE_VLV. v2: Add more details to the commit message. No functional changes. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411 Reported-and-tested-by: Alexander Bersenev CC: Ben Widawsky Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: add cc: stable and make the commit message a bit clearer that this is a regression fix and what exactly broke.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e83a117..3280cff 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4250,7 +4250,8 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_mt_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(0xffff)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); } static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) @@ -4267,7 +4268,8 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL)); - POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1), FORCEWAKE_ACK_TIMEOUT_MS)) @@ -4304,14 +4306,16 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_MT */ + POSTING_READ(ECOBUS); gen6_gt_check_fifodbg(dev_priv); } @@ -4351,6 +4355,8 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) static void vlv_force_wake_reset(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(0xffff)); + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); } static void vlv_force_wake_get(struct drm_i915_private *dev_priv) @@ -4371,7 +4377,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv) static void vlv_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL)); - /* The below doubles as a POSTING_READ */ + /* something from same cacheline, but !FORCEWAKE_VLV */ + POSTING_READ(FORCEWAKE_ACK_VLV); gen6_gt_check_fifodbg(dev_priv); } -- cgit v0.10.2 From 6948ce588bd765352df6f6b866f2151e26489ef1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 20 Dec 2012 11:08:57 -0800 Subject: gpio: samsung: skip gpio lib registration for EXYNOS5440 Since exynos5440 can support pinctrl so skip the legacy gpiolib registration. If not, happens following. WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c() Unknown SoC in gpio-samsung, no GPIOs added Acked-by: Thomas Abraham Signed-off-by: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index c1f6bc2..76be7ee 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3025,6 +3025,7 @@ static __init int samsung_gpiolib_init(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,pinctrl-exynos4210", }, { .compatible = "samsung,pinctrl-exynos4x12", }, + { .compatible = "samsung,pinctrl-exynos5440", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) if (pctrl_np && of_device_is_available(pctrl_np)) -- cgit v0.10.2 From 11c0ceec073cb35a1bedfdece701351cfc1da5b7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 14 Jan 2013 11:53:20 +0100 Subject: gpio: mvebu: Don't free chip label memory The gpio_chip.label field is a const char * and assigned the value of a call to dev_name(). Memory obtained from dev_name() should not be freed by drivers. Acked-by: Grant Likely Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 7d9bd94..6819d63 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -547,7 +547,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -557,14 +556,12 @@ static int mvebu_gpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (! res) { dev_err(&pdev->dev, "Cannot get memory resource\n"); - kfree(mvchip->chip.label); return -ENODEV; } mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res); if (! mvchip->percpu_membase) { dev_err(&pdev->dev, "Cannot ioremap\n"); - kfree(mvchip->chip.label); return -ENOMEM; } } @@ -625,7 +622,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { dev_err(&pdev->dev, "no irqs\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -633,7 +629,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->membase, handle_level_irq); if (! gc) { dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); - kfree(mvchip->chip.label); return -ENOMEM; } @@ -668,7 +663,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); kfree(gc); - kfree(mvchip->chip.label); return -ENODEV; } -- cgit v0.10.2 From 8ce03fd76d323526a693d05d85296ef07a387a9f Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 17 Nov 2012 12:45:47 +0100 Subject: cuse: use mutex as registration lock instead of spinlocks We need to check for name-collisions during cuse-device registration. To avoid race-conditions, this needs to be protected during the whole device registration. Therefore, replace the spinlocks by mutexes first so we can safely extend the locked regions to include more expensive or sleeping code paths. Signed-off-by: David Herrmann Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index ee8d550..048e89f 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include @@ -63,7 +62,7 @@ struct cuse_conn { bool unrestricted_ioctl; }; -static DEFINE_SPINLOCK(cuse_lock); /* protects cuse_conntbl */ +static DEFINE_MUTEX(cuse_lock); /* protects registration */ static struct list_head cuse_conntbl[CUSE_CONNTBL_LEN]; static struct class *cuse_class; @@ -114,14 +113,14 @@ static int cuse_open(struct inode *inode, struct file *file) int rc; /* look up and get the connection */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_for_each_entry(pos, cuse_conntbl_head(devt), list) if (pos->dev->devt == devt) { fuse_conn_get(&pos->fc); cc = pos; break; } - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* dead? */ if (!cc) @@ -377,9 +376,9 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) cc->cdev = cdev; /* make the device available */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_add(&cc->list, cuse_conntbl_head(devt)); - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* announce device availability */ dev_set_uevent_suppress(dev, 0); @@ -520,9 +519,9 @@ static int cuse_channel_release(struct inode *inode, struct file *file) int rc; /* remove from the conntbl, no more access from this point on */ - spin_lock(&cuse_lock); + mutex_lock(&cuse_lock); list_del_init(&cc->list); - spin_unlock(&cuse_lock); + mutex_unlock(&cuse_lock); /* remove device */ if (cc->dev) -- cgit v0.10.2 From 30783587b0f318b9e2e165f34cf5dfd9425a4904 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Sat, 17 Nov 2012 12:45:48 +0100 Subject: cuse: do not register multiple devices with identical names Sysfs doesn't allow two devices with the same name, but we register a sysfs entry for each cuse device without checking for name collisions. This extends the registration to first check whether the name was already registered. To avoid race-conditions between the name-check and linking the device, we need to protect the whole registration with a mutex. Signed-off-by: David Herrmann Acked-by: Tejun Heo Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index 048e89f..2a2797e 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -304,14 +304,14 @@ static void cuse_gendev_release(struct device *dev) */ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) { - struct cuse_conn *cc = fc_to_cc(fc); + struct cuse_conn *cc = fc_to_cc(fc), *pos; struct cuse_init_out *arg = req->out.args[0].value; struct page *page = req->pages[0]; struct cuse_devinfo devinfo = { }; struct device *dev; struct cdev *cdev; dev_t devt; - int rc; + int rc, i; if (req->out.h.error || arg->major != FUSE_KERNEL_VERSION || arg->minor < 11) { @@ -355,15 +355,24 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) dev_set_drvdata(dev, cc); dev_set_name(dev, "%s", devinfo.name); + mutex_lock(&cuse_lock); + + /* make sure the device-name is unique */ + for (i = 0; i < CUSE_CONNTBL_LEN; ++i) { + list_for_each_entry(pos, &cuse_conntbl[i], list) + if (!strcmp(dev_name(pos->dev), dev_name(dev))) + goto err_unlock; + } + rc = device_add(dev); if (rc) - goto err_device; + goto err_unlock; /* register cdev */ rc = -ENOMEM; cdev = cdev_alloc(); if (!cdev) - goto err_device; + goto err_unlock; cdev->owner = THIS_MODULE; cdev->ops = &cuse_frontend_fops; @@ -376,7 +385,6 @@ static void cuse_process_init_reply(struct fuse_conn *fc, struct fuse_req *req) cc->cdev = cdev; /* make the device available */ - mutex_lock(&cuse_lock); list_add(&cc->list, cuse_conntbl_head(devt)); mutex_unlock(&cuse_lock); @@ -390,7 +398,8 @@ out: err_cdev: cdev_del(cdev); -err_device: +err_unlock: + mutex_unlock(&cuse_lock); put_device(dev); err_region: unregister_chrdev_region(devt, 1); -- cgit v0.10.2 From e2560362cc2b39a0567cab510121a7e93dfbe797 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 15 Jan 2013 12:24:46 +0100 Subject: cuse: fix uninitialized variable warnings Fix the following compiler warnings: fs/fuse/cuse.c: In function 'cuse_process_init_reply': fs/fuse/cuse.c:288:24: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:14: note: 'val' was declared here fs/fuse/cuse.c:284:10: warning: 'key' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:8: note: 'key' was declared here Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index 2a2797e..e397b67 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -266,7 +266,7 @@ static int cuse_parse_one(char **pp, char *end, char **keyp, char **valp) static int cuse_parse_devinfo(char *p, size_t len, struct cuse_devinfo *devinfo) { char *end = p + len; - char *key, *val; + char *uninitialized_var(key), *uninitialized_var(val); int rc; while (true) { -- cgit v0.10.2 From 807185eb3e7271d7a1f2c08f3aa1b63dba547d07 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 29 Aug 2012 17:51:51 -0400 Subject: fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig Given that CUSE depends on FUSE, it only makes sense to move its Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical and semantic touchups. Signed-off-by: Robert P. J. Day Signed-off-by: Miklos Szeredi diff --git a/fs/Kconfig b/fs/Kconfig index cfe512f..780725a 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -68,16 +68,6 @@ source "fs/quota/Kconfig" source "fs/autofs4/Kconfig" source "fs/fuse/Kconfig" -config CUSE - tristate "Character device in Userspace support" - depends on FUSE_FS - help - This FUSE extension allows character devices to be - implemented in userspace. - - If you want to develop or use userspace character device - based on CUSE, answer Y or M. - config GENERIC_ACL bool select FS_POSIX_ACL diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig index 0cf160a..1b2f6c2 100644 --- a/fs/fuse/Kconfig +++ b/fs/fuse/Kconfig @@ -4,12 +4,24 @@ config FUSE_FS With FUSE it is possible to implement a fully functional filesystem in a userspace program. - There's also companion library: libfuse. This library along with - utilities is available from the FUSE homepage: + There's also a companion library: libfuse2. This library is available + from the FUSE homepage: + although chances are your distribution already has that library + installed if you've installed the "fuse" package itself. See for more information. See for needed library/utility version. If you want to develop a userspace FS, or if you want to use a filesystem based on FUSE, answer Y or M. + +config CUSE + tristate "Character device in Userspace support" + depends on FUSE_FS + help + This FUSE extension allows character devices to be + implemented in userspace. + + If you want to develop or use a userspace character device + based on CUSE, answer Y or M. -- cgit v0.10.2 From cdadb11cef1802c1b0228976f08647d276711086 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Sat, 10 Nov 2012 16:55:56 +0100 Subject: fuse: make fuse_file_fallocate() static Fix the following sparse warning: fs/fuse/file.c:2249:6: warning: symbol 'fuse_file_fallocate' was not declared. Should it be static? Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e21d4d8..f3ab824 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2177,8 +2177,8 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, return ret; } -long fuse_file_fallocate(struct file *file, int mode, loff_t offset, - loff_t length) +static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, + loff_t length) { struct fuse_file *ff = file->private_data; struct fuse_conn *fc = ff->fc; @@ -2213,7 +2213,6 @@ long fuse_file_fallocate(struct file *file, int mode, loff_t offset, return err; } -EXPORT_SYMBOL_GPL(fuse_file_fallocate); static const struct file_operations fuse_file_operations = { .llseek = fuse_file_llseek, -- cgit v0.10.2 From 8f706111a860c026bcb0abe0c5936f59c31e5c87 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 18 Oct 2012 22:51:25 +0800 Subject: fuse: remove unused variable in fuse_try_move_page() The variables mapping,index are initialized but never used otherwise, so remove the unused variables. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index c163353..e83351a 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -692,8 +692,6 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) struct page *oldpage = *pagep; struct page *newpage; struct pipe_buffer *buf = cs->pipebufs; - struct address_space *mapping; - pgoff_t index; unlock_request(cs->fc, cs->req); fuse_copy_finish(cs); @@ -724,9 +722,6 @@ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) if (fuse_check_page(newpage) != 0) goto out_fallback_unlock; - mapping = oldpage->mapping; - index = oldpage->index; - /* * This is a new and locked page, it shouldn't be mapped or * have any special flags on it -- cgit v0.10.2 From 20707874fd4fd37e09513f508e642fa8bd06365a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 17 Jan 2013 13:10:50 -0500 Subject: Revert "drm/radeon: do not move bo to different placement at each cs" This reverts commit d025e9e2b890db679f1246037bf65bd4be512627. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 768e8fe..a08f657 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -324,7 +324,6 @@ struct radeon_bo { struct list_head list; /* Protected by tbo.reserved */ u32 placements[3]; - u32 busy_placements[3]; struct ttm_placement placement; struct ttm_buffer_object tbo; struct ttm_bo_kmap_obj kmap; diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 883c95d..d3aface 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -84,6 +84,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) rbo->placement.fpfn = 0; rbo->placement.lpfn = 0; rbo->placement.placement = rbo->placements; + rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM; @@ -104,14 +105,6 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) if (!c) rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM; rbo->placement.num_placement = c; - - c = 0; - rbo->placement.busy_placement = rbo->busy_placements; - if (rbo->rdev->flags & RADEON_IS_AGP) { - rbo->busy_placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT; - } else { - rbo->busy_placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT; - } rbo->placement.num_busy_placement = c; } @@ -357,6 +350,7 @@ int radeon_bo_list_validate(struct list_head *head) { struct radeon_bo_list *lobj; struct radeon_bo *bo; + u32 domain; int r; r = ttm_eu_reserve_buffers(head); @@ -366,9 +360,17 @@ int radeon_bo_list_validate(struct list_head *head) list_for_each_entry(lobj, head, tv.head) { bo = lobj->bo; if (!bo->pin_count) { + domain = lobj->wdomain ? lobj->wdomain : lobj->rdomain; + + retry: + radeon_ttm_placement_from_domain(bo, domain); r = ttm_bo_validate(&bo->tbo, &bo->placement, true, false); if (unlikely(r)) { + if (r != -ERESTARTSYS && domain == RADEON_GEM_DOMAIN_VRAM) { + domain |= RADEON_GEM_DOMAIN_GTT; + goto retry; + } return r; } } -- cgit v0.10.2 From 6427a0d771dbf2a5cfbbed00caffbf1d11f4ae0b Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 6 Dec 2012 11:06:54 -0800 Subject: Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg There is bug in the definition of struct dm_info_msg. This patch fixes the definition of this structure and makes the corresponding adjustments. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index f6c0011..b9bb8f4 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -403,7 +403,7 @@ struct dm_info_header { */ struct dm_info_msg { - struct dm_info_header header; + struct dm_header hdr; __u32 reserved; __u32 info_size; __u8 info[]; @@ -503,13 +503,17 @@ static void hot_add_req(struct hv_dynmem_device *dm, struct dm_hot_add *msg) static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg) { - switch (msg->header.type) { + struct dm_info_header *info_hdr; + + info_hdr = (struct dm_info_header *)msg->info; + + switch (info_hdr->type) { case INFO_TYPE_MAX_PAGE_CNT: pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n"); - pr_info("Data Size is %d\n", msg->header.data_size); + pr_info("Data Size is %d\n", info_hdr->data_size); break; default: - pr_info("Received Unknown type: %d\n", msg->header.type); + pr_info("Received Unknown type: %d\n", info_hdr->type); } } -- cgit v0.10.2 From 33080c1cda280b918349c676cb75bedb6db4a772 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 11 Dec 2012 11:07:17 -0800 Subject: Drivers: hv: balloon: Fix a memory leak The send buffer was being leaked; fix it. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reported-by: Jason Wang Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index b9bb8f4..dd289fd 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -883,7 +883,7 @@ static int balloon_probe(struct hv_device *dev, balloon_onchannelcallback, dev); if (ret) - return ret; + goto probe_error0; dm_device.dev = dev; dm_device.state = DM_INITIALIZING; @@ -895,7 +895,7 @@ static int balloon_probe(struct hv_device *dev, kthread_run(dm_thread_func, &dm_device, "hv_balloon"); if (IS_ERR(dm_device.thread)) { ret = PTR_ERR(dm_device.thread); - goto probe_error0; + goto probe_error1; } hv_set_drvdata(dev, &dm_device); @@ -918,12 +918,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -932,7 +932,7 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* * Now submit our capabilities to the host. @@ -965,12 +965,12 @@ static int balloon_probe(struct hv_device *dev, VM_PKT_DATA_INBAND, VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret) - goto probe_error1; + goto probe_error2; t = wait_for_completion_timeout(&dm_device.host_event, 5*HZ); if (t == 0) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } /* @@ -979,18 +979,20 @@ static int balloon_probe(struct hv_device *dev, */ if (dm_device.state == DM_INIT_ERROR) { ret = -ETIMEDOUT; - goto probe_error1; + goto probe_error2; } dm_device.state = DM_INITIALIZED; return 0; -probe_error1: +probe_error2: kthread_stop(dm_device.thread); -probe_error0: +probe_error1: vmbus_close(dev->channel); +probe_error0: + kfree(send_buffer); return ret; } @@ -1003,6 +1005,7 @@ static int balloon_remove(struct hv_device *dev) vmbus_close(dev->channel); kthread_stop(dm->thread); + kfree(send_buffer); return 0; } -- cgit v0.10.2 From 1ee4c55fc9620451b2a825d793042a7e0775391b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 14 Jan 2013 01:29:17 +0000 Subject: staging: vt6656: Fix inconsistent structure packing vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb56ecd ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by: Malcolm Priestley Signed-off-by: Ben Hutchings Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/bssdb.h b/drivers/staging/vt6656/bssdb.h index 6b2ec39..806cbf7 100644 --- a/drivers/staging/vt6656/bssdb.h +++ b/drivers/staging/vt6656/bssdb.h @@ -90,7 +90,6 @@ typedef struct tagSRSNCapObject { } SRSNCapObject, *PSRSNCapObject; // BSS info(AP) -#pragma pack(1) typedef struct tagKnownBSS { // BSS info BOOL bActive; diff --git a/drivers/staging/vt6656/int.h b/drivers/staging/vt6656/int.h index 5d8faf9..e0d2b07 100644 --- a/drivers/staging/vt6656/int.h +++ b/drivers/staging/vt6656/int.h @@ -34,7 +34,6 @@ #include "device.h" /*--------------------- Export Definitions -------------------------*/ -#pragma pack(1) typedef struct tagSINTData { BYTE byTSR0; BYTE byPkt0; diff --git a/drivers/staging/vt6656/iocmd.h b/drivers/staging/vt6656/iocmd.h index 22710ce..ae6e2d2 100644 --- a/drivers/staging/vt6656/iocmd.h +++ b/drivers/staging/vt6656/iocmd.h @@ -95,13 +95,12 @@ typedef enum tagWZONETYPE { // Ioctl interface structure // Command structure // -#pragma pack(1) typedef struct tagSCmdRequest { u8 name[16]; void *data; u16 wResult; u16 wCmdCode; -} SCmdRequest, *PSCmdRequest; +} __packed SCmdRequest, *PSCmdRequest; // // Scan @@ -111,7 +110,7 @@ typedef struct tagSCmdScan { u8 ssid[SSID_MAXLEN + 2]; -} SCmdScan, *PSCmdScan; +} __packed SCmdScan, *PSCmdScan; // // BSS Join @@ -126,7 +125,7 @@ typedef struct tagSCmdBSSJoin { BOOL bPSEnable; BOOL bShareKeyAuth; -} SCmdBSSJoin, *PSCmdBSSJoin; +} __packed SCmdBSSJoin, *PSCmdBSSJoin; // // Zonetype Setting @@ -137,7 +136,7 @@ typedef struct tagSCmdZoneTypeSet { BOOL bWrite; WZONETYPE ZoneType; -} SCmdZoneTypeSet, *PSCmdZoneTypeSet; +} __packed SCmdZoneTypeSet, *PSCmdZoneTypeSet; typedef struct tagSWPAResult { char ifname[100]; @@ -145,7 +144,7 @@ typedef struct tagSWPAResult { u8 key_mgmt; u8 eap_type; BOOL authenticated; -} SWPAResult, *PSWPAResult; +} __packed SWPAResult, *PSWPAResult; typedef struct tagSCmdStartAP { @@ -157,7 +156,7 @@ typedef struct tagSCmdStartAP { BOOL bShareKeyAuth; u8 byBasicRate; -} SCmdStartAP, *PSCmdStartAP; +} __packed SCmdStartAP, *PSCmdStartAP; typedef struct tagSCmdSetWEP { @@ -167,7 +166,7 @@ typedef struct tagSCmdSetWEP { BOOL bWepKeyAvailable[WEP_NKEYS]; u32 auWepKeyLength[WEP_NKEYS]; -} SCmdSetWEP, *PSCmdSetWEP; +} __packed SCmdSetWEP, *PSCmdSetWEP; typedef struct tagSBSSIDItem { @@ -180,14 +179,14 @@ typedef struct tagSBSSIDItem { BOOL bWEPOn; u32 uRSSI; -} SBSSIDItem; +} __packed SBSSIDItem; typedef struct tagSBSSIDList { u32 uItem; SBSSIDItem sBSSIDList[0]; -} SBSSIDList, *PSBSSIDList; +} __packed SBSSIDList, *PSBSSIDList; typedef struct tagSNodeItem { @@ -208,7 +207,7 @@ typedef struct tagSNodeItem { u32 uTxAttempts; u16 wFailureRatio; -} SNodeItem; +} __packed SNodeItem; typedef struct tagSNodeList { @@ -216,7 +215,7 @@ typedef struct tagSNodeList { u32 uItem; SNodeItem sNodeList[0]; -} SNodeList, *PSNodeList; +} __packed SNodeList, *PSNodeList; typedef struct tagSCmdLinkStatus { @@ -229,7 +228,7 @@ typedef struct tagSCmdLinkStatus { u32 uChannel; u32 uLinkRate; -} SCmdLinkStatus, *PSCmdLinkStatus; +} __packed SCmdLinkStatus, *PSCmdLinkStatus; // // 802.11 counter @@ -247,7 +246,7 @@ typedef struct tagSDot11MIBCount { u32 ReceivedFragmentCount; u32 MulticastReceivedFrameCount; u32 FCSErrorCount; -} SDot11MIBCount, *PSDot11MIBCount; +} __packed SDot11MIBCount, *PSDot11MIBCount; @@ -355,13 +354,13 @@ typedef struct tagSStatMIBCount { u32 ullTxBroadcastBytes[2]; u32 ullTxMulticastBytes[2]; u32 ullTxDirectedBytes[2]; -} SStatMIBCount, *PSStatMIBCount; +} __packed SStatMIBCount, *PSStatMIBCount; typedef struct tagSCmdValue { u32 dwValue; -} SCmdValue, *PSCmdValue; +} __packed SCmdValue, *PSCmdValue; // // hostapd & viawget ioctl related @@ -431,7 +430,7 @@ struct viawget_hostapd_param { u8 ssid[32]; } scan_req; } u; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ diff --git a/drivers/staging/vt6656/iowpa.h b/drivers/staging/vt6656/iowpa.h index 959c886..2522dde 100644 --- a/drivers/staging/vt6656/iowpa.h +++ b/drivers/staging/vt6656/iowpa.h @@ -67,12 +67,11 @@ enum { -#pragma pack(1) typedef struct viawget_wpa_header { u8 type; u16 req_ie_len; u16 resp_ie_len; -} viawget_wpa_header; +} __packed viawget_wpa_header; struct viawget_wpa_param { u32 cmd; @@ -113,9 +112,8 @@ struct viawget_wpa_param { u8 *buf; } scan_results; } u; -}; +} __packed; -#pragma pack(1) struct viawget_scan_result { u8 bssid[6]; u8 ssid[32]; @@ -130,7 +128,7 @@ struct viawget_scan_result { int noise; int level; int maxrate; -}; +} __packed; /*--------------------- Export Classes ----------------------------*/ -- cgit v0.10.2 From ded2f295a36d17838fe97e80d7b6ea83381474f8 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 11 Jan 2013 12:06:27 +0100 Subject: pty: return EINVAL for TIOCGPTN for BSD ptys Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up ENOIOCTLCMD error handling) changed the default return value from tty ioctl to be ENOTTY and not EINVAL. This is appropriate. But in case of TIOCGPTN for the old BSD ptys glibc started failing because it expects EINVAL to be returned. Only then it continues to obtain the pts name the other way around. So fix this case by explicit return of EINVAL in this case. Signed-off-by: Jiri Slaby Reported-by: Florian Westphal Cc: Alan Cox Cc: stable # 3.7+ Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index be6a373..79ff3a5 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -441,6 +441,8 @@ static int pty_bsd_ioctl(struct tty_struct *tty, return pty_get_pktmode(tty, (int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); + case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */ + return -EINVAL; } return -ENOIOCTLCMD; } -- cgit v0.10.2 From ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 Mon Sep 17 00:00:00 2001 From: Stephen Hurd Date: Thu, 17 Jan 2013 14:14:53 -0800 Subject: 8250/16?50: Add support for Broadcom TruManage redirected serial port Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd Signed-off-by: Michael Chan Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a..f932043 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, [PORT_8250_CIR] = { .name = "CIR port" } @@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up) port->icount.tx++; if (uart_circ_empty(xmit)) break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 3b4ea84..12caa12 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -40,6 +40,7 @@ struct serial8250_config { #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8a2c3d9..a27a98e 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv, return setup_port(priv, port, 2, idx * 8, 0); } +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1304,6 +1316,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ @@ -1954,6 +1967,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_xr17v35x_setup, }, /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + + /* * Default "match everything" terminator entry */ { @@ -2148,6 +2172,7 @@ enum pci_board_num_t { pbn_ce4100_1_115200, pbn_omegapci, pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, }; /* @@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = { .num_ports = 2, .base_baud = 115200, }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id blacklist[] = { @@ -4471,6 +4502,13 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_omegapci }, /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + + /* * AgeStar as-prs2-009 */ { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 78f99d9..2c6c85f 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -50,7 +50,8 @@ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ #define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ -#define PORT_MAX_8250 24 /* max port ID */ +#define PORT_BRCM_TRUMANAGE 24 +#define PORT_MAX_8250 25 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed -- cgit v0.10.2 From 444ee9bd3d0fa78317c6127c961af5accf50038b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 16 Jan 2013 18:53:48 -0800 Subject: PCI: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook Signed-off-by: Bjorn Helgaas diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 6c8bc58..fde4a32 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -82,4 +82,4 @@ endchoice config PCIE_PME def_bool y - depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI + depends on PCIEPORTBUS && PM_RUNTIME && ACPI -- cgit v0.10.2 From d3286144c92ec876da9e30320afa875699b7e0f1 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Thu, 17 Jan 2013 13:50:25 +0100 Subject: KVM: PPC: Emulate dcbf Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins Signed-off-by: Alexander Graf Tested-by: Ben Collins CC: stable@vger.kernel.org diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index b0855e5..9d9cddc 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -39,6 +39,7 @@ #define OP_31_XOP_TRAP 4 #define OP_31_XOP_LWZX 23 #define OP_31_XOP_TRAP_64 68 +#define OP_31_XOP_DCBF 86 #define OP_31_XOP_LBZX 87 #define OP_31_XOP_STWX 151 #define OP_31_XOP_STBX 215 @@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs); break; + case OP_31_XOP_DCBF: case OP_31_XOP_DCBI: /* Do nothing. The guest is performing dcbi because * hardware DMA is not snooped by the dcache, but -- cgit v0.10.2 From 811a37effdb11e54e1ff1ddaa944286c88f58487 Mon Sep 17 00:00:00 2001 From: Tormod Volden Date: Wed, 9 Jan 2013 22:23:32 +0100 Subject: staging: wlan-ng: Fix clamping of returned SSID length Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501 Signed-off-by: Tormod Volden Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c index 4efa9bc..89bfd85 100644 --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -406,7 +406,7 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp) /* SSID */ req->ssid.status = P80211ENUM_msgitem_status_data_ok; req->ssid.data.len = le16_to_cpu(item->ssid.len); - req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_BSSID_LEN); + req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN); memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len); /* supported rates */ -- cgit v0.10.2 From 7dfc8331781f954bbea5c59d4411acf3b28530c1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Jan 2013 20:17:01 -0500 Subject: staging/sb105x: PARPORT config is not good enough must use PARPORT_PC The sb105x driver calls parport_pc_probe_port() which isn't defined if PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good enough, must protect it with CONFIG_PARPORT_PC. Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index 131afd0c..9464f38 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -3054,7 +3054,7 @@ static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); } break; -#ifdef CONFIG_PARPORT +#ifdef CONFIG_PARPORT_PC case PCI_DEVICE_ID_MP2S1P : sbdev->nr_ports = 2; -- cgit v0.10.2 From 2291dff02e5f8c708a46a7c4c888f2c467e26642 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 17 Jan 2013 15:14:22 +0100 Subject: USB: option: blacklist network interface on ONDA MT8205 4G LTE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 478adcf..25724f6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -930,7 +930,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, -- cgit v0.10.2 From 99beb2e9687ffd61c92a9875141eabe6f57a71b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 15 Jan 2013 10:29:49 +0100 Subject: USB: option: add TP-LINK HSUPA Modem MA180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 25724f6..0d9dac9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -449,6 +449,10 @@ static void option_instat_callback(struct urb *urb); #define PETATEL_VENDOR_ID 0x1ff4 #define PETATEL_PRODUCT_NP10T 0x600e +/* TP-LINK Incorporated products */ +#define TPLINK_VENDOR_ID 0x2357 +#define TPLINK_PRODUCT_MA180 0x0201 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1312,6 +1316,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v0.10.2 From 1ee0a224bc9aad1de496c795f96bc6ba2c394811 Mon Sep 17 00:00:00 2001 From: Wolfgang Frisch Date: Thu, 17 Jan 2013 01:07:02 +0100 Subject: USB: io_ti: Fix NULL dereference in chase_port() The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[] [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [] ? add_wait_queue+0x12/0x3c [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? chase_port+0x84/0x2d6 [ 56.283512] [] ? try_to_wake_up+0x199/0x199 [ 56.283512] [] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [] ? edge_close+0x64/0x129 [ 56.283512] [] ? __wake_up+0x35/0x46 [ 56.283512] [] ? should_resched+0x5/0x23 [ 56.283512] [] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [] ? __tty_hangup+0x307/0x351 [ 56.283512] [] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [] ? device_release_driver+0x1a/0x25 [ 56.283512] [] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [] ? device_del+0x119/0x167 [ 56.283512] [] ? usb_disable_device+0x6a/0x180 [ 56.283512] [] ? usb_disconnect+0x81/0xe6 [ 56.283512] [] ? hub_thread+0x577/0xe82 [ 56.283512] [] ? __schedule+0x490/0x4be [ 56.283512] [] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [] ? kthread+0x81/0x89 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 58184f3..82afc4d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -530,6 +530,9 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, wait_queue_t wait; unsigned long flags; + if (!tty) + return; + if (!timeout) timeout = (HZ * EDGE_CLOSING_WAIT)/100; -- cgit v0.10.2 From e04340375a314166e14519fca9e5b9e9394b2d7a Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 18 Jan 2013 12:00:47 +0100 Subject: ALSA: hda - Fix mute led for another HP machine This machine also has the "HP_Mute_LED_0_A" string in DMI information. Cc: BugLink: https://bugs.launchpad.net/bugs/1096789 Tested-by: Tammy Yang Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f519627..6369b23 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6251,6 +6251,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0349, "Acer AOD260", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_MIC2_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x1972, "HP Pavilion 17", ALC269_FIXUP_MIC1_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x1977, "HP Pavilion 14", ALC269_FIXUP_MIC1_MUTE_LED), SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), -- cgit v0.10.2 From 091a62c9b3d899d99dbf4e3dbebc8dfa3edbccdd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 14 Dec 2012 21:30:27 +0300 Subject: usb: musb: cppi_dma: drop '__init' annotation This patch fixes the following: WARNING: vmlinux.o(.text+0x1e709c): Section mismatch in reference from the funct ion dma_controller_create() to the function .init.text:cppi_controller_start() The function dma_controller_create() references the function __init cppi_controller_start(). This is often because dma_controller_create lacks a __init annotation or the annotation of cppi_controller_start is wrong. This warning is there due to the deficiency in the commit 07a67bbb (usb: musb: Make dma_controller_create __devinit). Since the start() method is only called from musb_init_controller() which is not annotated, drop '__init' annotation from cppi_controller_start() and also cppi_pool_init() since it gets called from that function, to avoid another section mismatch warning... Signed-off-by: Sergei Shtylyov Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 0968dd7..f522000 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -105,7 +105,7 @@ static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr) musb_writel(&tx->tx_complete, 0, ptr); } -static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) +static void cppi_pool_init(struct cppi *cppi, struct cppi_channel *c) { int j; @@ -150,7 +150,7 @@ static void cppi_pool_free(struct cppi_channel *c) c->last_processed = NULL; } -static int __init cppi_controller_start(struct dma_controller *c) +static int cppi_controller_start(struct dma_controller *c) { struct cppi *controller; void __iomem *tibase; -- cgit v0.10.2 From f0ea8834df058371d1e59012d4a67488429fb4a2 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:15 +0800 Subject: usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6277baf..9bd5777 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan( #include struct imx_fsl_usb2_udc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 37e4439..3c06bd9 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -11,35 +11,36 @@ #include "../hardware.h" #include "devices-common.h" -#define imx_fsl_usb2_udc_data_entry_single(soc) \ +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _USB_OTG_BASE_ADDR, \ .irq = soc ## _INT_USB_OTG, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25); + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27); + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31); + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35); + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX51); + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51"); #endif struct platform_device *__init imx_add_fsl_usb2_udc( @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + return imx_add_platform_device_dmamask(data->devid, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 1b0f086..de851e5 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,8 +18,6 @@ #include #include -#include - static struct clk *mxc_ahb_clk; static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; @@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) clk_prepare_enable(mxc_per_clk); /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!cpu_is_mx51()) { + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { @@ -82,17 +80,15 @@ eclkrate: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - } + unsigned int v; + + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + writel(v | USBPHYCTRL_EVDO, + MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); } /* ULPI transceivers don't need usbpll */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c19f7f1..5fc1d72 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) unsigned int i; u32 dccparams; - if (strcmp(pdev->name, driver_name)) { - VDBG("Wrong device"); - return -ENODEV; - } - udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); if (udc_controller == NULL) { ERR("malloc udc failed\n"); @@ -2756,22 +2752,32 @@ static int fsl_udc_otg_resume(struct device *dev) return fsl_udc_resume(NULL); } - /*------------------------------------------------------------------------- Register entry point for the peripheral controller driver --------------------------------------------------------------------------*/ - +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "imx-udc-mx27", + }, { + .name = "imx-udc-mx51", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = __exit_p(fsl_udc_remove), + /* Just for FSL i.mx SoC currently */ + .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ - .suspend = fsl_udc_suspend, - .resume = fsl_udc_resume, - .driver = { - .name = (char *)driver_name, - .owner = THIS_MODULE, - /* udc suspend/resume called from OTG driver */ - .suspend = fsl_udc_otg_suspend, - .resume = fsl_udc_otg_resume, + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, }, }; -- cgit v0.10.2 From c2c9caa94748657ac8b47428ef4e95ccb646cea7 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:16 +0800 Subject: usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index de851e5..d3bd7b0 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -23,7 +23,8 @@ static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -77,25 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - unsigned int v; + int ret = 0; /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; + } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5fc1d72..667275c 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967..c6703bb 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { -- cgit v0.10.2 From 61c4b560e9a42cbc4ce1b95a1bd59b01d449168d Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 17 Jan 2013 18:03:17 +0800 Subject: ARM: i.MX clock: Change the connection-id for fsl-usb2-udc As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen Acked-by: Shawn Guo Signed-off-by: Felipe Balbi diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index b197aa7..2c570cd 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -254,9 +254,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 4c1d1e4..1ffe3b534 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8be64e0..16ccbd4 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); /* i.mx31 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 66f3d65..f0727e8 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -251,9 +251,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 579023f..fb7cb84 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51"); clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); -- cgit v0.10.2 From 6048e4c69d80600baba35856651056860d5d8f5a Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 18 Jan 2013 16:53:56 +0530 Subject: usb: dwc3: gadget: fix ep->maxburst for ep0 dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by default initialize ep->maxburst to 1 for ep0. Cc: Signed-off-by: Pratyush Anand Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2e43b33..2fdd767 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1605,6 +1605,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) if (epnum == 0 || epnum == 1) { dep->endpoint.maxpacket = 512; + dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!epnum) dwc->gadget.ep0 = &dep->endpoint; -- cgit v0.10.2 From b810075002c9f25a6da83cecda39d789000a04a9 Mon Sep 17 00:00:00 2001 From: Benoit Goby Date: Tue, 8 Jan 2013 19:57:09 -0800 Subject: usb: gadget: FunctionFS: Fix missing braces in parse_opts Add missing braces around an if block in ffs_fs_parse_opts. This broke parsing the uid/gid mount options and causes mount to fail when using uid/gid. This has been introduced by commit b9b73f7c (userns: Convert usb functionfs to use kuid/kgid where appropriate) in 3.7. Cc: Signed-off-by: Benoit Goby Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 4a6961c..8c2f251 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1153,15 +1153,15 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - } - else if (!memcmp(opts, "gid", 3)) + } else if (!memcmp(opts, "gid", 3)) { data->perms.gid = make_kgid(current_user_ns(), value); if (!gid_valid(data->perms.gid)) { pr_err("%s: unmapped value: %lu\n", opts, value); return -EINVAL; } - else + } else { goto invalid; + } break; default: -- cgit v0.10.2 From 6f8c2e7933679f54b6478945dc72e59ef9a3d5e0 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:01 +0100 Subject: intel_idle: Don't register CPU notifier if we are not running. The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [] ? collect_cpu_info_local+0x30/0x30 [] ? __might_sleep+0xe7/0x100 [] cpuidle_register_device+0x32/0x70 [] intel_idle_cpu_init+0xad/0x110 [] cpu_hotplug_notify+0x68/0x80 [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 [] vfs_write+0xb4/0x130 [] sys_write+0x5a/0xa0 [] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [] __cpuidle_register_device+0x1c/0x120 RSP This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Srivatsa S. Bhat Cc: 3.6+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 4ba384f..2df9414 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -448,8 +448,6 @@ static int intel_idle_probe(void) else on_each_cpu(__setup_broadcast_timer, (void *)true, 1); - register_cpu_notifier(&cpu_hotplug_notifier); - pr_debug(PREFIX "v" INTEL_IDLE_VERSION " model 0x%X\n", boot_cpu_data.x86_model); @@ -612,6 +610,7 @@ static int __init intel_idle_init(void) return retval; } } + register_cpu_notifier(&cpu_hotplug_notifier); return 0; } -- cgit v0.10.2 From b88a634a903d9670aa5f2f785aa890628ce0dece Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Jan 2013 23:40:07 +0100 Subject: ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled If cpuidle is disabled, that means that: per_cpu(acpi_cpuidle_device, pr->id) is set to NULL as the acpi_processor_power_init ends up failing at retval = cpuidle_register_driver(&acpi_idle_driver) (in acpi_processor_power_init) and never sets the per_cpu idle device. So when acpi_processor_hotplug on CPU online notification tries to reference said device it crashes: cpu 3 spinlock event irq 62 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 PGD a259b067 PUD ab38b067 PMD 0 Oops: 0002 [#1] SMP odules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c nouveau mxm_wmi wmi radeon ttm sg sr_mod sd_mod cdrom ata_generic ata_piix libata crc32c_intel scsi_mod atl1c i915 fbcon tileblit font bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 1 Pid: 3047, comm: bash Not tainted 3.8.0-rc3upstream-00250-g165c029 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[] [] acpi_processor_setup_cpuidle_cx+0x3f/0x105 RSP: e02b:ffff88001742dca8 EFLAGS: 00010202 RAX: 0000000000010be9 RBX: ffff8800a0a61800 RCX: ffff880105380000 RDX: 0000000000000003 RSI: 0000000000000200 RDI: ffff8800a0a61800 RBP: ffff88001742dce8 R08: ffffffff81812360 R09: 0000000000000200 R10: aaaaaaaaaaaaaaaa R11: 0000000000000001 R12: ffff8800a0a61800 R13: 00000000ffffff01 R14: 0000000000000000 R15: ffffffff81a907a0 FS: 00007fd6942f7700(0000) GS:ffff880105280000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000000a6773000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 3047, threadinfo ffff88001742c000, task ffff880017944000) Stack: 0000000000000150 ffff880100f59e00 ffff88001742dcd8 ffff8800a0a61800 0000000000000000 00000000ffffff01 0000000000000000 ffffffff81a907a0 ffff88001742dd18 ffffffff813815b1 ffff88001742dd08 ffffffff810ae336 Call Trace: [] acpi_processor_hotplug+0x7c/0x9f [] ? schedule_delayed_work_on+0x16/0x20 [] acpi_cpu_soft_notify+0x90/0xca [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0x9/0x10 [] __cpu_notify+0x1b/0x30 [] _cpu_up+0x103/0x14b [] cpu_up+0xd9/0xec [] store_online+0x94/0xd0 [] dev_attr_store+0x1b/0x20 [] sysfs_write_file+0xf4/0x170 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk Cc: Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f1a5da4..fea6f8d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr) return -EINVAL; } + if (!dev) + return -EINVAL; + dev->cpu = pr->id; if (max_cstate == 0) -- cgit v0.10.2 From 631e8ac18fd59722e7ceb15fceeef3f368c250f9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 18 Jan 2013 00:19:37 +0100 Subject: powernow-k8: Add a kconfig dependency on acpi-cpufreq Andreas reports in https://bugzilla.kernel.org/show_bug.cgi?id=51741 that with his Gentoo config, acpi-cpufreq wasn't enabled and powernow-k8 couldn't handoff properly to acpi-cpufreq leading to running without P-state support (i.e., cores are constantly in P0). To alleaviate that, we need to make powernow-k8 depend on acpi-cpufreq so that acpi-cpufreq is always present. References: https://bugzilla.kernel.org/show_bug.cgi?id=51741 Reported-by: Andreas Signed-off-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 934854a..7227cd7 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ help This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. Support for K10 and newer processors is now in acpi-cpufreq. -- cgit v0.10.2 From 2f91ec8cc456d6e57db3ebced34a9e96a356168f Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Wed, 26 Dec 2012 03:19:55 +0300 Subject: asm-generic, mm: pgtable: convert my_zero_pfn() to macros to fix build Commit 816422ad7647 ("asm-generic, mm: pgtable: consolidate zero page helpers") broke the compile on MIPS if SPARSEMEM is enabled. We get this: In file included from arch/mips/include/asm/pgtable.h:552, from include/linux/mm.h:44, from arch/mips/kernel/asm-offsets.c:14: include/asm-generic/pgtable.h: In function 'my_zero_pfn': include/asm-generic/pgtable.h:466: error: implicit declaration of function 'page_to_section' In file included from arch/mips/kernel/asm-offsets.c:14: include/linux/mm.h: At top level: include/linux/mm.h:738: error: conflicting types for 'page_to_section' include/asm-generic/pgtable.h:466: note: previous implicit declaration of 'page_to_section' was here Due header files inter-dependencies, the only way I see to fix it is convert my_zero_pfn() for __HAVE_COLOR_ZERO_PAGE to macros. Signed-off-by: Kirill A. Shutemov Tested-by: Aaro Koskinen Acked-by: David Daney Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 701beab..5cf680a9 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -461,10 +461,8 @@ static inline int is_zero_pfn(unsigned long pfn) return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT); } -static inline unsigned long my_zero_pfn(unsigned long addr) -{ - return page_to_pfn(ZERO_PAGE(addr)); -} +#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr)) + #else static inline int is_zero_pfn(unsigned long pfn) { -- cgit v0.10.2 From f427e5f1cf75bba84cccdac1d8a90552d9ae1065 Mon Sep 17 00:00:00 2001 From: Thomas Schlichter Date: Sat, 19 Jan 2013 00:28:22 +0100 Subject: ACPI / processor: Get power info before updating the C-states acpi_processor_get_power_info() has to be called before acpi_processor_setup_cpuidle_states() to have the latest information available. This fixes the missing C-state information after AC-->DC transition. Signed-off-by: Thomas Schlichter Cc: Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fea6f8d..ed9a1cc 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1152,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) } /* Populate Updated C-state information */ + acpi_processor_get_power_info(pr); acpi_processor_setup_cpuidle_states(pr); /* Enable all cpuidle devices */ -- cgit v0.10.2 From 981827a2b7f896de1bdf6c2e185bed4fc1a5200f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 18 Jan 2013 16:48:15 -0700 Subject: ARM: OMAP4: clock data: Lock ABE DPLL on all revisions To avoid issues with audio caused by non locked ABE DPLL we should make sure it is locked in all OMAP4 revisions. Signed-off-by: Peter Ujfalusi Acked-by: Jon Hunter [paul@pwsan.com: cleaned up patch description] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 5789a5e..a2cc046 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void) * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by * locking the ABE DPLL on boot. + * Lock the ABE DPLL in any case to avoid issues with audio. */ - if (cpu_is_omap446x()) { - rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); - if (!rc) - rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); - } + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); return 0; } -- cgit v0.10.2 From 12d82e4b0aa6c71f38b668a372f9a13f243207da Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 18 Jan 2013 16:48:16 -0700 Subject: ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi [paul@pwsan.com: copy patch description into hwmod data comments] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 129d508..793f54a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { * currently reset very early during boot, before I2C is * available, so it doesn't seem that we have any choice in * the kernel other than to avoid resetting it. + * + * Also, McPDM needs to be configured to NO_IDLE mode when it + * is in used otherwise vital clocks will be gated which + * results 'slow motion' audio playback. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", -- cgit v0.10.2 From bdcc61275232db897ba831f87a16df98ab248571 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 18 Jan 2013 16:48:16 -0700 Subject: ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls During the migration to the common clock framework, calls to the functions omap2xxx_clkt_vps_late_init() were not preserved for OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the following error message to be displayed because the appropriate MPU clock frequency (derived from sys_ck_rate) cannot be found. "Could not set MPU rate to 4294MHz" Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the OMAP2420 and OMAP2430 clock initialisation code. Signed-off-by: Jon Hunter [paul@pwsan.com: dropped the duplicated call to omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon; updated patch description] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 7e5febe..ab7e952 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index eda079b..eb3dab6 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, -- cgit v0.10.2 From 25216865392a6e1f3032855aee7407de1fe0b70c Mon Sep 17 00:00:00 2001 From: Lans Zhang Date: Wed, 16 Jan 2013 09:03:29 +0000 Subject: ACPI, APEI: Fixup incorrect 64-bit access width firmware bug The bit width check was introduced by 15afae60 (ACPI, APEI: Fix incorrect APEI register bit width check and usage), and a fixup for incorrect 32-bit width memory address was given by f712c71 (ACPI, APEI: Fixup common access width firmware bug). Now there is a similar symptom: [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0] Another bogus BIOS reports an incorrect 64-bit width in trigger table. Thus, apply to a similar workaround for 64-bit width memory address. Signed-off-by: Lans Zhang Acked-by: Gary Hade Acked-by: Myron Stowe Acked-by: Jean Delvare Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 00a7836..46f80e2 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 && *access_bit_width < 32) *access_bit_width = 32; + else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 && + *access_bit_width < 64) + *access_bit_width = 64; if ((bit_width + bit_offset) > *access_bit_width) { pr_warning(FW_BUG APEI_PFX -- cgit v0.10.2 From 15653371c67c3fbe359ae37b720639dd4c7b42c5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 19 Jan 2013 11:05:57 +0000 Subject: ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem Subhash Jadavani reported this partial backtrace: Now consider this call stack from MMC block driver (this is on the ARMv7 based board): [] (v7_dma_inv_range+0x30/0x48) from [] (dma_cache_maint_page+0x1c4/0x24c) [] (dma_cache_maint_page+0x1c4/0x24c) from [] (___dma_page_cpu_to_dev+0x14/0x1c) [] (___dma_page_cpu_to_dev+0x14/0x1c) from [] (dma_map_sg+0x3c/0x114) This is caused by incrementing the struct page pointer, and running off the end of the sparsemem page array. Fix this by incrementing by pfn instead, and convert the pfn to a struct page. Cc: Suggested-by: James Bottomley Tested-by: Subhash Jadavani Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 6b2fb87..076c26d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) { + unsigned long pfn; + size_t left = size; + + pfn = page_to_pfn(page) + offset / PAGE_SIZE; + offset %= PAGE_SIZE; + /* * A single sg entry may refer to multiple physically contiguous * pages. But we still need to process highmem pages individually. * If highmem is not configured then the bulk of this loop gets * optimized out. */ - size_t left = size; do { size_t len = left; void *vaddr; + page = pfn_to_page(pfn); + if (PageHighMem(page)) { - if (len + offset > PAGE_SIZE) { - if (offset >= PAGE_SIZE) { - page += offset / PAGE_SIZE; - offset %= PAGE_SIZE; - } + if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; - } vaddr = kmap_high_get(page); if (vaddr) { vaddr += offset; @@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); } offset = 0; - page++; + pfn++; left -= len; } while (left); } -- cgit v0.10.2 From ec50b4cea63fdcd1f1c428b93a47986d74c244b8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 19 Jan 2013 12:17:54 +0100 Subject: ALSA: hda - Add fixup for Acer AO725 laptop Acer AO725 needs the same fixup as AO756. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6369b23..cf38861 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6266,6 +6266,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), + SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), -- cgit v0.10.2 From 93d5bf073a1e01035be66dc41860b9ae9aa9ccfa Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 17 Jan 2013 07:18:04 +0100 Subject: ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO Commit 8fb54284ba6a {ARM: mm: Add strongly ordered descriptor support} added XN flag at section level but missed it at PTE level. Fix it by adding the L_PTE_XN to MT_MEMORY_SO PTE descriptor. Reported-by: Richard Woodruff Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9f06102..ce328c7 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -283,7 +283,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_SO] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_MT_UNCACHED, + L_PTE_MT_UNCACHED | L_PTE_XN, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S | PMD_SECT_UNCACHED | PMD_SECT_XN, -- cgit v0.10.2 From 43b16820249396aea7eb57c747106e211e54bed5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Jan 2013 13:29:54 -0500 Subject: make sure that /linuxrc has std{in,out,err} Signed-off-by: Al Viro diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index 5e4ded5..f9acf71 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -36,6 +36,10 @@ __setup("noinitrd", no_initrd); static int init_linuxrc(struct subprocess_info *info, struct cred *new) { sys_unshare(CLONE_FS | CLONE_FILES); + /* stdin/stdout/stderr for /linuxrc */ + sys_open("/dev/console", O_RDWR, 0); + sys_dup(0); + sys_dup(0); /* move initrd over / and chdir/chroot in initrd root */ sys_chdir("/root"); sys_mount(".", "/", NULL, MS_MOVE, NULL); -- cgit v0.10.2 From b1e0318b8cd4bdbb0fbc48967b0350483ad9bd69 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 19 Jan 2013 22:13:34 -0500 Subject: sys_clone() needs asmlinkage_protect Cc: stable@vger.kernel.org Signed-off-by: Al Viro diff --git a/kernel/fork.c b/kernel/fork.c index a31b823..e05cff2 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1660,8 +1660,10 @@ SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp, int, tls_val) #endif { - return do_fork(clone_flags, newsp, 0, - parent_tidptr, child_tidptr); + long ret = do_fork(clone_flags, newsp, 0, parent_tidptr, child_tidptr); + asmlinkage_protect(5, ret, clone_flags, newsp, + parent_tidptr, child_tidptr, tls_val); + return ret; } #endif -- cgit v0.10.2 From ed0fb78fb6aa294a719f8f5654fdff0ec8bc00bc Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: Btrfs: bring back balance pause/resume logic Balance pause/resume logic got broken by 5ac00add (went in into 3.8-rc1 as part of dev-replace merge). Offending commit took a stab at making mutually exclusive volume operations (add_dev, rm_dev, resize, balance, replace_dev) not block behind volume_mutex if another such operation is in progress and instead return an error right away. Balancing front-end relied on the blocking behaviour, so the fix is ugly, but short of a complete rework, it's the best we can do. Reported-by: Liu Bo Signed-off-by: Ilya Dryomov diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 982c0b9..77d8273 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3440,8 +3440,8 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) struct btrfs_fs_info *fs_info = root->fs_info; struct btrfs_ioctl_balance_args *bargs; struct btrfs_balance_control *bctl; + bool need_unlock; /* for mut. excl. ops lock */ int ret; - int need_to_clear_lock = 0; if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -3450,14 +3450,61 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) if (ret) return ret; - mutex_lock(&fs_info->volume_mutex); +again: + if (!atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)) { + mutex_lock(&fs_info->volume_mutex); + mutex_lock(&fs_info->balance_mutex); + need_unlock = true; + goto locked; + } + + /* + * mut. excl. ops lock is locked. Three possibilites: + * (1) some other op is running + * (2) balance is running + * (3) balance is paused -- special case (think resume) + */ mutex_lock(&fs_info->balance_mutex); + if (fs_info->balance_ctl) { + /* this is either (2) or (3) */ + if (!atomic_read(&fs_info->balance_running)) { + mutex_unlock(&fs_info->balance_mutex); + if (!mutex_trylock(&fs_info->volume_mutex)) + goto again; + mutex_lock(&fs_info->balance_mutex); + + if (fs_info->balance_ctl && + !atomic_read(&fs_info->balance_running)) { + /* this is (3) */ + need_unlock = false; + goto locked; + } + + mutex_unlock(&fs_info->balance_mutex); + mutex_unlock(&fs_info->volume_mutex); + goto again; + } else { + /* this is (2) */ + mutex_unlock(&fs_info->balance_mutex); + ret = -EINPROGRESS; + goto out; + } + } else { + /* this is (1) */ + mutex_unlock(&fs_info->balance_mutex); + pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + ret = -EINVAL; + goto out; + } + +locked: + BUG_ON(!atomic_read(&fs_info->mutually_exclusive_operation_running)); if (arg) { bargs = memdup_user(arg, sizeof(*bargs)); if (IS_ERR(bargs)) { ret = PTR_ERR(bargs); - goto out; + goto out_unlock; } if (bargs->flags & BTRFS_BALANCE_RESUME) { @@ -3477,13 +3524,10 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) bargs = NULL; } - if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, - 1)) { - pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + if (fs_info->balance_ctl) { ret = -EINPROGRESS; goto out_bargs; } - need_to_clear_lock = 1; bctl = kzalloc(sizeof(*bctl), GFP_NOFS); if (!bctl) { @@ -3504,11 +3548,17 @@ static long btrfs_ioctl_balance(struct file *file, void __user *arg) } do_balance: - ret = btrfs_balance(bctl, bargs); /* - * bctl is freed in __cancel_balance or in free_fs_info if - * restriper was paused all the way until unmount + * Ownership of bctl and mutually_exclusive_operation_running + * goes to to btrfs_balance. bctl is freed in __cancel_balance, + * or, if restriper was paused all the way until unmount, in + * free_fs_info. mutually_exclusive_operation_running is + * cleared in __cancel_balance. */ + need_unlock = false; + + ret = btrfs_balance(bctl, bargs); + if (arg) { if (copy_to_user(arg, bargs, sizeof(*bargs))) ret = -EFAULT; @@ -3516,12 +3566,12 @@ do_balance: out_bargs: kfree(bargs); -out: - if (need_to_clear_lock) - atomic_set(&root->fs_info->mutually_exclusive_operation_running, - 0); +out_unlock: mutex_unlock(&fs_info->balance_mutex); mutex_unlock(&fs_info->volume_mutex); + if (need_unlock) + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); +out: mnt_drop_write_file(file); return ret; } diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 86279c3..9c84dbe 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2959,6 +2959,8 @@ static void __cancel_balance(struct btrfs_fs_info *fs_info) unset_balance_control(fs_info); ret = del_balance_item(fs_info->tree_root); BUG_ON(ret); + + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); } void update_ioctl_balance_args(struct btrfs_fs_info *fs_info, int lock, @@ -3138,8 +3140,10 @@ int btrfs_balance(struct btrfs_balance_control *bctl, out: if (bctl->flags & BTRFS_BALANCE_RESUME) __cancel_balance(fs_info); - else + else { kfree(bctl); + atomic_set(&fs_info->mutually_exclusive_operation_running, 0); + } return ret; } @@ -3156,7 +3160,6 @@ static int balance_kthread(void *data) ret = btrfs_balance(fs_info->balance_ctl, NULL); } - atomic_set(&fs_info->mutually_exclusive_operation_running, 0); mutex_unlock(&fs_info->balance_mutex); mutex_unlock(&fs_info->volume_mutex); @@ -3179,7 +3182,6 @@ int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info) return 0; } - WARN_ON(atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)); tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance"); if (IS_ERR(tsk)) return PTR_ERR(tsk); @@ -3233,6 +3235,8 @@ int btrfs_recover_balance(struct btrfs_fs_info *fs_info) btrfs_balance_sys(leaf, item, &disk_bargs); btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs); + WARN_ON(atomic_xchg(&fs_info->mutually_exclusive_operation_running, 1)); + mutex_lock(&fs_info->volume_mutex); mutex_lock(&fs_info->balance_mutex); -- cgit v0.10.2 From 2c0c9da02a2c4289350da6e54202a86602c0f926 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: Btrfs: fix "mutually exclusive op is running" error code The error code that is returned in response to starting a mutually exclusive operation when there is one already running got silently changed from EINVAL to EINPROGRESS by 5ac00add. Returning EINPROGRESS to, say, add_dev, when rm_dev is running is misleading. Furthermore, the operation itself may want to use EINPROGRESS for other purposes. Signed-off-by: Ilya Dryomov diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 77d8273..259dd52 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1340,7 +1340,7 @@ static noinline int btrfs_ioctl_resize(struct file *file, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); mnt_drop_write_file(file); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); @@ -2192,7 +2192,7 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); - return -EINPROGRESS; + return -EINVAL; } ret = mnt_want_write_file(file); if (ret) { @@ -2266,7 +2266,7 @@ static long btrfs_ioctl_add_dev(struct btrfs_root *root, void __user *arg) if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); @@ -2303,7 +2303,7 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg) 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); mnt_drop_write_file(file); - return -EINPROGRESS; + return -EINVAL; } mutex_lock(&root->fs_info->volume_mutex); -- cgit v0.10.2 From 18f39c416d18d74ac11d157e44247253d3fa30ae Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: Btrfs: fix unlock order in btrfs_ioctl_resize Fix unlock order in btrfs_ioctl_resize(). Signed-off-by: Ilya Dryomov diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 259dd52..fcf1b1b 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1446,8 +1446,8 @@ out_free: kfree(vol_args); out: mutex_unlock(&root->fs_info->volume_mutex); - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } -- cgit v0.10.2 From 4ac20c70b0734b65662ded735e5f6ba0415bdb71 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: Btrfs: fix unlock order in btrfs_ioctl_rm_dev Fix unlock order in btrfs_ioctl_rm_dev(). Signed-off-by: Ilya Dryomov diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index fcf1b1b..f5c1c15 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2319,8 +2319,8 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg) kfree(vol_args); out: mutex_unlock(&root->fs_info->volume_mutex); - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } -- cgit v0.10.2 From 25122d15e21cf252e91e4cad7cea760f97df29f1 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sun, 20 Jan 2013 15:57:57 +0200 Subject: Btrfs: reorder locks and sanity checks in btrfs_ioctl_defrag Operation-specific check (whether subvol is readonly or not) should go after the mutual exclusiveness check. Signed-off-by: Ilya Dryomov diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f5c1c15..afbf3ac 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2186,19 +2186,20 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) struct btrfs_ioctl_defrag_range_args *range; int ret; - if (btrfs_root_readonly(root)) - return -EROFS; + ret = mnt_want_write_file(file); + if (ret) + return ret; if (atomic_xchg(&root->fs_info->mutually_exclusive_operation_running, 1)) { pr_info("btrfs: dev add/delete/balance/replace/resize operation in progress\n"); + mnt_drop_write_file(file); return -EINVAL; } - ret = mnt_want_write_file(file); - if (ret) { - atomic_set(&root->fs_info->mutually_exclusive_operation_running, - 0); - return ret; + + if (btrfs_root_readonly(root)) { + ret = -EROFS; + goto out; } switch (inode->i_mode & S_IFMT) { @@ -2250,8 +2251,8 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) ret = -EINVAL; } out: - mnt_drop_write_file(file); atomic_set(&root->fs_info->mutually_exclusive_operation_running, 0); + mnt_drop_write_file(file); return ret; } -- cgit v0.10.2 From edea0d03ee5f0ae0051b6adb6681ebdf976b1ca4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 20 Jan 2013 20:25:47 +0100 Subject: ia64: kill thread_matches(), unexport ptrace_check_attach() The ia64 function "thread_matches()" has no users since commit e868a55c2a8c ("[IA64] remove find_thread_for_addr()"). Remove it. This allows us to make ptrace_check_attach() static to kernel/ptrace.c, which is good since we'll need to change the semantics of it and fix up all the callers. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 4265ff6..b7a5fff 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) read_unlock(&tasklist_lock); } -static inline int -thread_matches (struct task_struct *thread, unsigned long addr) -{ - unsigned long thread_rbs_end; - struct pt_regs *thread_regs; - - if (ptrace_check_attach(thread, 0) < 0) - /* - * If the thread is not in an attachable state, we'll - * ignore it. The net effect is that if ADDR happens - * to overlap with the portion of the thread's - * register backing store that is currently residing - * on the thread's kernel stack, then ptrace() may end - * up accessing a stale value. But if the thread - * isn't stopped, that's a problem anyhow, so we're - * doing as well as we can... - */ - return 0; - - thread_regs = task_pt_regs(thread); - thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL); - if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end)) - return 0; - - return 1; /* looks like we've got a winner */ -} - /* * Write f32-f127 back to task->thread.fph if it has been modified. */ diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 1693775..89573a3 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -45,7 +45,6 @@ extern long arch_ptrace(struct task_struct *child, long request, extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len); extern void ptrace_disable(struct task_struct *); -extern int ptrace_check_attach(struct task_struct *task, bool ignore_state); extern int ptrace_request(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern void ptrace_notify(int exit_code); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 1599157..612a561 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -139,7 +139,7 @@ void __ptrace_unlink(struct task_struct *child) * RETURNS: * 0 on success, -ESRCH if %child is not ready. */ -int ptrace_check_attach(struct task_struct *child, bool ignore_state) +static int ptrace_check_attach(struct task_struct *child, bool ignore_state) { int ret = -ESRCH; -- cgit v0.10.2 From 630541863b29f88c7ab34e647758344e4cd1eafd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 14:25:44 +1000 Subject: ttm: don't destroy old mm_node on memcpy failure When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index d73d6e3..44420fc 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -344,8 +344,12 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, if (ttm->state == tt_unpopulated) { ret = ttm->bdev->driver->ttm_tt_populate(ttm); - if (ret) + if (ret) { + /* if we fail here don't nuke the mm node + * as the bo still owns it */ + old_copy.mm_node = NULL; goto out1; + } } add = 0; @@ -371,8 +375,11 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo, prot); } else ret = ttm_copy_io_page(new_iomap, old_iomap, page); - if (ret) + if (ret) { + /* failing here, means keep old copy as-is */ + old_copy.mm_node = NULL; goto out1; + } } mb(); out2: -- cgit v0.10.2 From 014b34409fb2015f63663b6cafdf557fdf289628 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 16 Jan 2013 15:58:34 +1000 Subject: ttm: on move memory failure don't leave a node dangling if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 33d20be..52b20b1 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -434,6 +434,7 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, bo->mem = tmp_mem; bdev->driver->move_notify(bo, mem); bo->mem = *mem; + *mem = tmp_mem; } goto out_err; -- cgit v0.10.2 From ee61abb3223e28a1a14a8429c0319755d20d3e40 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Jan 2013 20:22:58 -0800 Subject: module: fix missing module_mutex unlock Commit 1fb9341ac348 ("module: put modules in list much earlier") moved some of the module initialization code around, and in the process changed the exit paths too. But for the duplicate export symbol error case the change made the ddebug_cleanup path jump to after the module mutex unlock, even though it happens with the mutex held. Rusty has some patches to split this function up into some helper functions, hopefully the mess of complex goto targets will go away eventually. Reported-by: Dan Carpenter Cc: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/kernel/module.c b/kernel/module.c index d25e359..eab0827 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3274,8 +3274,8 @@ again: /* module_bug_cleanup needs module_mutex protection */ mutex_lock(&module_mutex); module_bug_cleanup(mod); - mutex_unlock(&module_mutex); ddebug_cleanup: + mutex_unlock(&module_mutex); dynamic_debug_remove(info->debug); synchronize_sched(); kfree(mod->args); -- cgit v0.10.2 From e3e2775cedc9d6294b7bc7cbe9f59c62f9472871 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Wed, 16 Jan 2013 21:36:17 -0500 Subject: cifs: fix srcip_matches() for ipv6 srcip_matches() previously had code like this: srcip_matches(..., struct sockaddr *rhs) { /* ... */ struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs; return ipv6_addr_equal(..., &vaddr6->sin6_addr); } which interpreted the values on the stack after the 'rhs' pointer as an ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'. Signed-off-by: Nickolai Zeldovich Reviewed-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 17c3643..12b3da3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1917,7 +1917,7 @@ srcip_matches(struct sockaddr *srcaddr, struct sockaddr *rhs) } case AF_INET6: { struct sockaddr_in6 *saddr6 = (struct sockaddr_in6 *)srcaddr; - struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *)&rhs; + struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *)rhs; return ipv6_addr_equal(&saddr6->sin6_addr, &vaddr6->sin6_addr); } default: -- cgit v0.10.2 From a67adb997419fb53540d4a4f79c6471c60bc69b6 Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Fri, 18 Jan 2013 23:56:39 +0200 Subject: evm: checking if removexattr is not a NULL The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [] notify_change+0x25f/0x281 [ 139.924982] [] chmod_common+0x59/0x76 [ 139.924982] [] ? put_unused_fd+0x33/0x33 [ 139.924982] [] sys_fchmod+0x39/0x5c [ 139.924982] [] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by: Dmitry Kasatkin Signed-off-by: Mimi Zohar Cc: stable@vger.kernel.org Signed-off-by: James Morris diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index dfb2691..7dd538e 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -205,9 +205,9 @@ int evm_update_evmxattr(struct dentry *dentry, const char *xattr_name, rc = __vfs_setxattr_noperm(dentry, XATTR_NAME_EVM, &xattr_data, sizeof(xattr_data), 0); - } - else if (rc == -ENODATA) + } else if (rc == -ENODATA && inode->i_op->removexattr) { rc = inode->i_op->removexattr(dentry, XATTR_NAME_EVM); + } return rc; } -- cgit v0.10.2 From 103a197c0c4ec936f5a243b5b092e4e49213f569 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Thu, 17 Jan 2013 01:04:14 -0700 Subject: security/device_cgroup: lock assert fails in dev_exception_clean() devcgroup_css_free() calls dev_exception_clean() without the devcgroup_mutex being locked. Shutting down a kvm virt was giving me the following trace: [36280.732764] ------------[ cut here ]------------ [36280.732778] WARNING: at /home/snits/dev/linux/security/device_cgroup.c:172 dev_exception_clean+0xa9/0xc0() [36280.732782] Hardware name: Studio XPS 8100 [36280.732785] Modules linked in: xt_REDIRECT fuse ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_CHECKSUM iptable_mangle bridge stp llc nf_conntrack_ipv4 ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 ip6table_filter it87 hwmon_vid xt_state nf_conntrack ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq coretemp snd_seq_device crc32c_intel snd_pcm snd_page_alloc snd_timer snd broadcom tg3 serio_raw i7core_edac edac_core ptp pps_core lpc_ich pcspkr mfd_core soundcore microcode i2c_i801 nfsd auth_rpcgss nfs_acl lockd vhost_net sunrpc tun macvtap macvlan kvm_intel kvm uinput binfmt_misc autofs4 usb_storage firewire_ohci firewire_core crc_itu_t radeon drm_kms_helper ttm [36280.732921] Pid: 933, comm: libvirtd Tainted: G W 3.8.0-rc3-00307-g4c217de #1 [36280.732922] Call Trace: [36280.732927] [] warn_slowpath_common+0x93/0xc0 [36280.732930] [] warn_slowpath_null+0x1a/0x20 [36280.732932] [] dev_exception_clean+0xa9/0xc0 [36280.732934] [] devcgroup_css_free+0x1a/0x30 [36280.732938] [] cgroup_diput+0x76/0x210 [36280.732941] [] d_delete+0x120/0x180 [36280.732943] [] vfs_rmdir+0xef/0x130 [36280.732945] [] do_rmdir+0x107/0x1c0 [36280.732949] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [36280.732951] [] sys_rmdir+0x16/0x20 [36280.732954] [] system_call_fastpath+0x16/0x1b [36280.732956] ---[ end trace ca39dced899a7d9f ]--- Signed-off-by: Jerry Snitselaar Cc: stable@kernel.org Signed-off-by: James Morris diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 19ecc8d..d794abc 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -215,7 +215,9 @@ static void devcgroup_css_free(struct cgroup *cgroup) struct dev_cgroup *dev_cgroup; dev_cgroup = cgroup_to_devcgroup(cgroup); + mutex_lock(&devcgroup_mutex); dev_exception_clean(dev_cgroup); + mutex_unlock(&devcgroup_mutex); kfree(dev_cgroup); } -- cgit v0.10.2 From 85de7fac3990cf0c0736edc83856add2e648c76a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Nov 2012 06:19:06 +0100 Subject: i2c: mxs: Fix misuse init_completion The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1b1a936..977c4d5 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -316,7 +316,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (msg->len == 0) return -EINVAL; - init_completion(&i2c->cmd_complete); + INIT_COMPLETION(i2c->cmd_complete); i2c->cmd_err = 0; ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -473,6 +473,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) i2c->dev = dev; i2c->speed = &mxs_i2c_95kHz_config; + init_completion(&i2c->cmd_complete); + if (dev->of_node) { err = mxs_i2c_get_ofdata(i2c); if (err) -- cgit v0.10.2 From 42c364ace52ae6b4699105b39f2559c256b6cd4c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 21 Jan 2013 16:53:37 +0100 Subject: ALSA: hda - Add Conexant CX20755/20756/20757 codec IDs These are just compatible with other CX2075x codecs. Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index dd798c3..009b77a 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -4636,6 +4636,12 @@ static const struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_conexant_auto }, { .id = 0x14f15111, .name = "CX20753/4", .patch = patch_conexant_auto }, + { .id = 0x14f15113, .name = "CX20755", + .patch = patch_conexant_auto }, + { .id = 0x14f15114, .name = "CX20756", + .patch = patch_conexant_auto }, + { .id = 0x14f15115, .name = "CX20757", + .patch = patch_conexant_auto }, {} /* terminator */ }; @@ -4659,6 +4665,9 @@ MODULE_ALIAS("snd-hda-codec-id:14f150b9"); MODULE_ALIAS("snd-hda-codec-id:14f1510f"); MODULE_ALIAS("snd-hda-codec-id:14f15110"); MODULE_ALIAS("snd-hda-codec-id:14f15111"); +MODULE_ALIAS("snd-hda-codec-id:14f15113"); +MODULE_ALIAS("snd-hda-codec-id:14f15114"); +MODULE_ALIAS("snd-hda-codec-id:14f15115"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Conexant HD-audio codec"); -- cgit v0.10.2 From c1bf08ac26e92122faab9f6c32ea8aba94612dae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 14 Dec 2012 09:48:15 -0500 Subject: ftrace: Be first to run code modification on modules If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] ? __probe_kernel_read+0x46/0x70 [] ? 0xffffffffa017ffff [] ? 0xffffffffa017ffff [] warn_slowpath_null+0x1a/0x20 [] ftrace_bug+0x239/0x280 [] ftrace_process_locs+0x376/0x520 [] ftrace_module_notify+0x47/0x50 [] notifier_call_chain+0x4d/0x70 [] __blocking_notifier_call_chain+0x58/0x80 [] blocking_notifier_call_chain+0x16/0x20 [] sys_init_module+0x73/0x220 [] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu Reported-by: Frank Ch. Eigler Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 3ffe4c5..41473b4 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3998,7 +3998,7 @@ static int ftrace_module_notify(struct notifier_block *self, struct notifier_block ftrace_module_nb = { .notifier_call = ftrace_module_notify, - .priority = 0, + .priority = INT_MAX, /* Run before anything that can use kprobes */ }; extern unsigned long __start_mcount_loc[]; -- cgit v0.10.2 From 81f3ae0671dcd70b5d076d899d299c9cf33f3345 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 20 Jan 2013 09:37:23 -0600 Subject: ARM: OMAP2+: fix build break for omapdrm Fixes compile break with 3.8-rc4. Signed-off-by: Rob Clark Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 4c7566c..2a2cfa8 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -25,6 +25,7 @@ #include #include +#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -56,7 +57,7 @@ static int __init omap_init_drm(void) oh->name); } - platform_data.omaprev = GET_OMAP_REVISION(); + platform_data.omaprev = GET_OMAP_TYPE; return platform_device_register(&omap_drm_device); -- cgit v0.10.2 From e407ee099a1d3d80b63123491c81ca7de9d77ad9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 21 Jan 2013 10:17:03 -0800 Subject: ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() Otherwise we will get: WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the function omap_init_ocp2scp() to the function .init.text:omap_device_build() The function omap_init_ocp2scp() references the function __init omap_device_build(). This is often because omap_init_ocp2scp lacks a __init annotation or the annotation of omap_device_build is wrong. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5e304d0..626f3ea 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) return cnt; } -static void omap_init_ocp2scp(void) +static void __init omap_init_ocp2scp(void) { struct omap_hwmod *oh; struct platform_device *pdev; -- cgit v0.10.2 From 034bf091b7a5f02e63409b0b5b6dad1101d70144 Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Tue, 8 Jan 2013 15:31:42 +0200 Subject: ARM: OMAP2+: DT node Timer iteration fix The iterator correctly handles of_node_put() calls. Remove it before continue'ing the loop. Without this patch you get the following with CONFIG_OF_DYNAMIC set: ERROR: Bad of_node_put() on /ocp/timer@44e31000! [] (unwind_backtrace+0x0/0xe0) from [] (of_node_release+0x2c/0xa0)! [] (of_node_release+0x2c/0xa0) from [] (of_find_matching_node_and_match+0x78/0x90)! [] (of_find_matching_node_and_match+0x78/0x90) from [] (omap_get_timer_dt+0x78/0x90)! [] (omap_get_timer_dt+0x78/0x90) from [] (omap_dm_timer_init_one.clone.2+0x34/0x2bc)! [] (omap_dm_timer_init_one.clone.2+0x34/0x2bc) from [] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8)! [] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8) from [] (time_init+0x20/0x30)! [] (time_init+0x20/0x30) from [] (start_kernel+0x1a8/0x2fc)! Signed-off-by: Pantelis Antoniou Acked-by: Jon Hunter [tony@atomide.com: updated description per Jon] Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 691aa67..b8ad6e6 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, struct device_node *np; for_each_matching_node(np, match) { - if (!of_device_is_available(np)) { - of_node_put(np); + if (!of_device_is_available(np)) continue; - } - if (property && !of_get_property(np, property, NULL)) { - of_node_put(np); + if (property && !of_get_property(np, property, NULL)) continue; - } of_add_property(np, &device_disabled); return np; -- cgit v0.10.2 From 7662a9c60fee25d7234da4be6d8eab2b2ac88448 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 21 Jan 2013 13:14:12 +0200 Subject: ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable [3.7] Signed-off-by: Luciano Coelho Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 5c8e9ce..769c1fe 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; -- cgit v0.10.2 From ff24858c65d9c518af41aad22fb964685351051a Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 17 Jan 2013 01:22:08 -0700 Subject: Btrfs: ignore orphan qgroup relations If a qgroup that has still assignments is deleted by the user, the corresponding relations are left in the tree. This leads to an unmountable filesystem. With this patch, those relations are simple ignored. Reported-by: Eric Hopper Signed-off-by: Arne Jansen Signed-off-by: Chris Mason diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index fe9d02c..28f2b39 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -379,6 +379,13 @@ next1: ret = add_relation_rb(fs_info, found_key.objectid, found_key.offset); + if (ret == -ENOENT) { + printk(KERN_WARNING + "btrfs: orphan qgroup relation 0x%llx->0x%llx\n", + (unsigned long long)found_key.objectid, + (unsigned long long)found_key.offset); + ret = 0; /* ignore the error */ + } if (ret) goto out; next2: -- cgit v0.10.2 From 2cf687039676c2b6e1ee96b0b89090aca94babcd Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 17 Jan 2013 01:22:09 -0700 Subject: Btrfs: prevent qgroup destroy when there are still relations Currently you can just destroy a qgroup even though it is in use by other qgroups or has qgroups assigned to it. This patch prevents destruction of qgroups unless they are completely unused. Otherwise destroy will return EBUSY. Reported-by: Eric Hopper Signed-off-by: Arne Jansen Signed-off-by: Chris Mason diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 28f2b39..a5c8562 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -963,17 +963,28 @@ int btrfs_remove_qgroup(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 qgroupid) { struct btrfs_root *quota_root; + struct btrfs_qgroup *qgroup; int ret = 0; quota_root = fs_info->quota_root; if (!quota_root) return -EINVAL; + /* check if there are no relations to this qgroup */ + spin_lock(&fs_info->qgroup_lock); + qgroup = find_qgroup_rb(fs_info, qgroupid); + if (qgroup) { + if (!list_empty(&qgroup->groups) || !list_empty(&qgroup->members)) { + spin_unlock(&fs_info->qgroup_lock); + return -EBUSY; + } + } + spin_unlock(&fs_info->qgroup_lock); + ret = del_qgroup_item(trans, quota_root, qgroupid); spin_lock(&fs_info->qgroup_lock); del_qgroup_rb(quota_root->fs_info, qgroupid); - spin_unlock(&fs_info->qgroup_lock); return ret; -- cgit v0.10.2 From a105bb88f46b60de2adf1ee98745bd59362b09ab Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 21 Jan 2013 15:15:56 +0200 Subject: Btrfs: fix a regression in balance usage filter Commit 3fed40cc ("Btrfs: cleanup duplicated division functions"), which was merged into 3.8-rc1, has introduced a regression by removing logic that was guarding us against bad user input. Bring it back. Signed-off-by: Ilya Dryomov Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 9c84dbe..4696098 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2614,7 +2614,14 @@ static int chunk_usage_filter(struct btrfs_fs_info *fs_info, u64 chunk_offset, cache = btrfs_lookup_block_group(fs_info, chunk_offset); chunk_used = btrfs_block_group_used(&cache->item); - user_thresh = div_factor_fine(cache->key.offset, bargs->usage); + if (bargs->usage == 0) + user_thresh = 0; + else if (bargs->usage > 100) + user_thresh = cache->key.offset; + else + user_thresh = div_factor_fine(cache->key.offset, + bargs->usage); + if (chunk_used < user_thresh) ret = 0; -- cgit v0.10.2 From 6e6093a8f144414d904575da5fdea40cf14fb63e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 17 Jan 2013 00:08:30 +0900 Subject: f2fs: add __init to functions in init_f2fs_fs Add __init to functions in init_f2fs_fs for code consistency. Signed-off-by: Namjae Jeon Signed-off-by: Amit Sahrawat Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index d75c86a..ff3c843 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -771,7 +771,7 @@ void init_orphan_info(struct f2fs_sb_info *sbi) sbi->n_orphans = 0; } -int create_checkpoint_caches(void) +int __init create_checkpoint_caches(void) { orphan_entry_slab = f2fs_kmem_cache_create("f2fs_orphan_entry", sizeof(struct orphan_inode_entry), NULL); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 976325d..c8e2d75 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -914,7 +914,7 @@ int restore_node_summary(struct f2fs_sb_info *, unsigned int, void flush_nat_entries(struct f2fs_sb_info *); int build_node_manager(struct f2fs_sb_info *); void destroy_node_manager(struct f2fs_sb_info *); -int create_node_manager_caches(void); +int __init create_node_manager_caches(void); void destroy_node_manager_caches(void); /* @@ -966,7 +966,7 @@ void sync_dirty_dir_inodes(struct f2fs_sb_info *); void block_operations(struct f2fs_sb_info *); void write_checkpoint(struct f2fs_sb_info *, bool, bool); void init_orphan_info(struct f2fs_sb_info *); -int create_checkpoint_caches(void); +int __init create_checkpoint_caches(void); void destroy_checkpoint_caches(void); /* @@ -988,7 +988,7 @@ void stop_gc_thread(struct f2fs_sb_info *); block_t start_bidx_of_node(unsigned int); int f2fs_gc(struct f2fs_sb_info *); void build_gc_manager(struct f2fs_sb_info *); -int create_gc_caches(void); +int __init create_gc_caches(void); void destroy_gc_caches(void); /* @@ -1060,7 +1060,7 @@ struct f2fs_stat_info { int f2fs_build_stats(struct f2fs_sb_info *); void f2fs_destroy_stats(struct f2fs_sb_info *); -void f2fs_create_root_stats(void); +void __init f2fs_create_root_stats(void); void f2fs_destroy_root_stats(void); #else #define stat_inc_call_count(si) @@ -1071,7 +1071,7 @@ void f2fs_destroy_root_stats(void); static inline int f2fs_build_stats(struct f2fs_sb_info *sbi) { return 0; } static inline void f2fs_destroy_stats(struct f2fs_sb_info *sbi) { } -static inline void f2fs_create_root_stats(void) { } +static inline void __init f2fs_create_root_stats(void) { } static inline void f2fs_destroy_root_stats(void) { } #endif diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index b4dd90c..809cfec 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -697,7 +697,7 @@ void build_gc_manager(struct f2fs_sb_info *sbi) DIRTY_I(sbi)->v_ops = &default_v_ops; } -int create_gc_caches(void) +int __init create_gc_caches(void) { winode_slab = f2fs_kmem_cache_create("f2fs_gc_inodes", sizeof(struct inode_entry), NULL); diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 5066bfd..f177c01 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1732,7 +1732,7 @@ void destroy_node_manager(struct f2fs_sb_info *sbi) kfree(nm_i); } -int create_node_manager_caches(void) +int __init create_node_manager_caches(void) { nat_entry_slab = f2fs_kmem_cache_create("nat_entry", sizeof(struct nat_entry), NULL); diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index d551a72..37fad04 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -640,7 +640,7 @@ static struct file_system_type f2fs_fs_type = { .fs_flags = FS_REQUIRES_DEV, }; -static int init_inodecache(void) +static int __init init_inodecache(void) { f2fs_inode_cachep = f2fs_kmem_cache_create("f2fs_inode_cache", sizeof(struct f2fs_inode_info), NULL); -- cgit v0.10.2 From 692bb55d1ab5b278181ff2e65f09eb0be6d50669 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 17 Jan 2013 18:37:41 +0900 Subject: f2fs: add remap_pages as generic_file_remap_pages This was added for all the file systems before. See the following commit. commit id: 0b173bc4daa8f8ec03a85abf5e47b23502ff80af [PATCH] mm: kill vma flag VM_CAN_NONLINEAR This patch moves actual ptes filling for non-linear file mappings into special vma operation: ->remap_pages(). File system must implement this method to get non-linear mappings support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support." Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 819de7f..3191b52 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -96,8 +96,9 @@ out: } static const struct vm_operations_struct f2fs_file_vm_ops = { - .fault = filemap_fault, - .page_mkwrite = f2fs_vm_page_mkwrite, + .fault = filemap_fault, + .page_mkwrite = f2fs_vm_page_mkwrite, + .remap_pages = generic_file_remap_pages, }; static int need_to_sync_dir(struct f2fs_sb_info *sbi, struct inode *inode) -- cgit v0.10.2 From c01e54b770e69c65525295eb2668be3dc0822406 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 17 Jan 2013 20:30:23 +0900 Subject: f2fs: support swapfile This patch adds f2fs_bmap operation to the data address space. This enables f2fs to support swapfile. Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index b1347fc..7bd22a2 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -698,6 +698,11 @@ static int f2fs_set_data_page_dirty(struct page *page) return 0; } +static sector_t f2fs_bmap(struct address_space *mapping, sector_t block) +{ + return generic_block_bmap(mapping, block, get_data_block_ro); +} + const struct address_space_operations f2fs_dblock_aops = { .readpage = f2fs_read_data_page, .readpages = f2fs_read_data_pages, @@ -709,4 +714,5 @@ const struct address_space_operations f2fs_dblock_aops = { .invalidatepage = f2fs_invalidate_data_page, .releasepage = f2fs_release_data_page, .direct_IO = f2fs_direct_IO, + .bmap = f2fs_bmap, }; -- cgit v0.10.2 From a7fdffbd3ea4b3cc2993af006bde38a423b38b72 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 18 Jan 2013 14:54:13 +0900 Subject: f2fs: avoid issuing small bios due to several dirty node pages If some small bios of dirty node pages are supposed to be issued during the sequential data writes, there-in well-produced consecutive data bios are able to be split by the small node bios, resulting in performance degradation. So, let's collect a number of dirty node pages until reaching a threshold. And, by default, I set the threshold as 2MB, a segment size. This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as follows. Before: 231 MB/s -> After: 255 MB/s Signed-off-by: Jaegeuk Kim Reviewed-by: Namjae Jeon diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index f177c01..9bda63c 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1124,6 +1124,12 @@ static int f2fs_write_node_page(struct page *page, return 0; } +/* + * It is very important to gather dirty pages and write at once, so that we can + * submit a big bio without interfering other data writes. + * Be default, 512 pages (2MB), a segment size, is quite reasonable. + */ +#define COLLECT_DIRTY_NODES 512 static int f2fs_write_node_pages(struct address_space *mapping, struct writeback_control *wbc) { @@ -1131,17 +1137,16 @@ static int f2fs_write_node_pages(struct address_space *mapping, struct block_device *bdev = sbi->sb->s_bdev; long nr_to_write = wbc->nr_to_write; - if (wbc->for_kupdate) - return 0; - - if (get_pages(sbi, F2FS_DIRTY_NODES) == 0) - return 0; - + /* First check balancing cached NAT entries */ if (try_to_free_nats(sbi, NAT_ENTRY_PER_BLOCK)) { write_checkpoint(sbi, false, false); return 0; } + /* collect a number of dirty node pages and write together */ + if (get_pages(sbi, F2FS_DIRTY_NODES) < COLLECT_DIRTY_NODES) + return 0; + /* if mounting is failed, skip writing node pages */ wbc->nr_to_write = bio_get_nr_vecs(bdev); sync_node_pages(sbi, 0, wbc); -- cgit v0.10.2 From 9af45ef5ab8ce4a13c553200dc15509441fbd68f Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Mon, 21 Jan 2013 17:34:21 +0900 Subject: f2fs: add comments of start_bidx_of_node The caller of start_bidx_of_node() should give proper node offsets which point only direct node blocks. Otherwise, it is a caller's bug. This patch adds comments to make it clear. Reported-by: Dan Carpenter Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index 809cfec..c386910 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -424,7 +424,11 @@ next_step: } /* - * Calculate start block index that this node page contains + * Calculate start block index indicating the given node offset. + * Be careful, caller should give this node offset only indicating direct node + * blocks. If any node offsets, which point the other types of node blocks such + * as indirect or double indirect node blocks, are given, it must be a caller's + * bug. */ block_t start_bidx_of_node(unsigned int node_ofs) { -- cgit v0.10.2 From d8b79b2f94600262fcfbffbe3df7fd3c83c6c51b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Jan 2013 18:02:58 +0300 Subject: f2fs: use _safe() version of list_for_each This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Torokhov Signed-off-by: Jaegeuk Kim diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index 6cc046d..f42e406 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -173,10 +173,9 @@ out: static void destroy_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head) { - struct list_head *this; - struct fsync_inode_entry *entry; - list_for_each(this, head) { - entry = list_entry(this, struct fsync_inode_entry, list); + struct fsync_inode_entry *entry, *tmp; + + list_for_each_entry_safe(entry, tmp, head, list) { iput(entry->inode); list_del(&entry->list); kmem_cache_free(fsync_entry_slab, entry); -- cgit v0.10.2 From 31b35e9edd51cab96d880248206c90b7177e3e5c Mon Sep 17 00:00:00 2001 From: Nestor Ovroy Date: Fri, 18 Jan 2013 16:51:03 +0100 Subject: regmap: fix small typo in regmap_bulk_write comment Signed-off-by: Nestor Ovroy Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 42d5cb0..f00b059 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1106,7 +1106,7 @@ EXPORT_SYMBOL_GPL(regmap_raw_write); * @val_count: Number of registers to write * * This function is intended to be used for writing a large block of - * data to be device either in single transfer or multiple transfer. + * data to the device either in single transfer or multiple transfer. * * A value of zero will be returned on success, a negative errno will * be returned in error cases. -- cgit v0.10.2 From 0f40cbc4f85e13b1a42ae2f41231645a14965872 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Jan 2013 22:32:06 -0200 Subject: i2c: mxs: Fix type of error code cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 977c4d5..d6abaf2 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -127,7 +127,7 @@ struct mxs_i2c_dev { struct device *dev; void __iomem *regs; struct completion cmd_complete; - u32 cmd_err; + int cmd_err; struct i2c_adapter adapter; const struct mxs_i2c_speed_config *speed; -- cgit v0.10.2 From bfd059da9503e0091541285cb0481f66b95c0296 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 26 Dec 2012 10:30:16 +0800 Subject: i2c: sirf: register i2c_client from dt child-nodes in probe entry in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 3f1818b..e03381a 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -328,6 +329,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->algo = &i2c_sirfsoc_algo; adap->algo_data = siic; + adap->dev.of_node = pdev->dev.of_node; adap->dev.parent = &pdev->dev; adap->nr = pdev->id; @@ -371,6 +373,8 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) clk_disable(clk); + of_i2c_register_devices(adap); + dev_info(&pdev->dev, " I2C adapter ready to operate\n"); return 0; -- cgit v0.10.2 From 43a2bd42d077de6ad40b00a2abfc4677e24d239c Mon Sep 17 00:00:00 2001 From: Laurent Navet Date: Tue, 8 Jan 2013 14:40:09 +0100 Subject: i2c: muxes: fix wrong use of sizeof(ptr) sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet Acked-by: Jean Delvare Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 1e44d04..a43c0ce 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -167,7 +167,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) } mux->busses = devm_kzalloc(&pdev->dev, - sizeof(mux->busses) * mux->pdata->bus_count, + sizeof(*mux->busses) * mux->pdata->bus_count, GFP_KERNEL); if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); -- cgit v0.10.2 From f44d188acdca1a34e4439ca6a173f85086e0e655 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:32 +0000 Subject: cpufreq: OMAP: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Alexander Holler Tested-by: Alexander Holler Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 1f3417a..97102b0 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy, freq = ret; if (mpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(mpu_dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", __func__, freqs.new); return -EINVAL; } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * OPP_TOLERANCE / 100; volt_old = regulator_get_voltage(mpu_reg); } -- cgit v0.10.2 From 78e8eb8feab7d85f4cc215afe1457a228bf4eed9 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:33 +0000 Subject: cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Jack Mitchell Tested-by: Alexander Holler Tested-by: Jack Mitchell Acked-by: Alexander Holler Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 52bf36d..debc5a7 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } if (cpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("failed to find OPP for %ld\n", freq_Hz); return PTR_ERR(opp); } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); } @@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void) */ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) ; + rcu_read_lock(); opp = opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); min_uV = opp_get_voltage(opp); opp = opp_find_freq_exact(cpu_dev, freq_table[i-1].frequency * 1000, true); max_uV = opp_get_voltage(opp); + rcu_read_unlock(); ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) transition_latency += ret * 1000; -- cgit v0.10.2 From bcb27549f4185ca7d0168e201931613706ef2b83 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:34 +0000 Subject: PM / devfreq: add locking documentation for recommended_opp OPP pointers are protected by RCU locks, the pointer validity is permissible only under the section of rcu_read_lock to rcu_read_unlock Add documentation to the effect. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 53766f3..3b36797 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -994,6 +994,11 @@ module_exit(devfreq_exit); * @freq: The frequency given to target function * @flags: Flags handed from devfreq framework. * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) -- cgit v0.10.2 From 8fa938acb318378463987b04be083dc2467e0480 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Jan 2013 19:52:35 +0000 Subject: PM / devfreq: exynos4_bus: honor RCU lock usage OPP pointers cannot be expected to be valid beyond the boundary of rcu_read_lock and rcu_read_unlock. Unfortunately, the current exynos4 busfreq driver does not honor the usage constraint and stores the OPP pointer in struct busfreq_data. This could potentially become invalid later such as: across devfreq opp change decisions, resulting in unpredictable behavior. To fix this, we introduce a busfreq specific busfreq_opp_info structure which is used to handle OPP information. OPP information is de-referenced to voltage and frequency pairs as needed into busfreq_opp_info structure and used as needed. Signed-off-by: Nishanth Menon Signed-off-by: Rafael J. Wysocki diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 80c745e..46d94e9 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -73,6 +73,16 @@ enum busclk_level_idx { #define EX4210_LV_NUM (LV_2 + 1) #define EX4x12_LV_NUM (LV_4 + 1) +/** + * struct busfreq_opp_info - opp information for bus + * @rate: Frequency in hertz + * @volt: Voltage in microvolts corresponding to this OPP + */ +struct busfreq_opp_info { + unsigned long rate; + unsigned long volt; +}; + struct busfreq_data { enum exynos4_busf_type type; struct device *dev; @@ -80,7 +90,7 @@ struct busfreq_data { bool disabled; struct regulator *vdd_int; struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct opp *curr_opp; + struct busfreq_opp_info curr_oppinfo; struct exynos4_ppmu dmc[2]; struct notifier_block pm_notifier; @@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = { }; -static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4210_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4210_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk) + if (oppi->rate == exynos4210_busclk_table[index].clk) break; if (index == EX4210_LV_NUM) @@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) return 0; } -static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4x12_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk) + if (oppi->rate == exynos4x12_mifclk_table[index].clk) break; if (index == EX4x12_LV_NUM) @@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk) return -EINVAL; } -static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, - struct opp *oldopp) +static int exynos4_bus_setvolt(struct busfreq_data *data, + struct busfreq_opp_info *oppi, + struct busfreq_opp_info *oldoppi) { int err = 0, tmp; - unsigned long volt = opp_get_voltage(opp); + unsigned long volt = oppi->volt; switch (data->type) { case TYPE_BUSF_EXYNOS4210: @@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, if (err) break; - tmp = exynos4x12_get_intspec(opp_get_freq(opp)); + tmp = exynos4x12_get_intspec(oppi->rate); if (tmp < 0) { err = tmp; regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; } @@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, /* Try to recover */ if (err) regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; default: @@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp = devfreq_recommended_opp(dev, _freq, flags); - unsigned long freq = opp_get_freq(opp); - unsigned long old_freq = opp_get_freq(data->curr_opp); + struct opp *opp; + unsigned long freq; + unsigned long old_freq = data->curr_oppinfo.rate; + struct busfreq_opp_info new_oppinfo; - if (IS_ERR(opp)) + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + freq = new_oppinfo.rate; if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp)); + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); @@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq < freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; if (old_freq != freq) { switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq > freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; out: mutex_unlock(&data->lock); return err; @@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev, exynos4_read_ppmu(data); busier_dmc = exynos4_get_busier_dmc(data); - stat->current_frequency = opp_get_freq(data->curr_opp); + stat->current_frequency = data->curr_oppinfo.rate; if (busier_dmc) addr = S5P_VA_DMC1; @@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, struct busfreq_data *data = container_of(this, struct busfreq_data, pm_notifier); struct opp *opp; + struct busfreq_opp_info new_oppinfo; unsigned long maxfreq = ULONG_MAX; int err = 0; @@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, data->disabled = true; + rcu_read_lock(); opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(data->dev, "%s: unable to find a min freq\n", + __func__); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto unlock; switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, if (err) goto unlock; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; unlock: mutex_unlock(&data->lock); if (err) @@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev) } } + rcu_read_lock(); opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(dev, "Invalid initial frequency %lu kHz.\n", exynos4_devfreq_profile.initial_freq); return PTR_ERR(opp); } - data->curr_opp = opp; + data->curr_oppinfo.rate = opp_get_freq(opp); + data->curr_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); platform_set_drvdata(pdev, data); -- cgit v0.10.2 From 9855d8ce41a7801548a05d844db2f46c3e810166 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Tue, 22 Jan 2013 13:37:21 +0100 Subject: ACPI: Check MSR valid bit before using P-state frequencies To fix incorrect P-state frequencies which can happen on some AMD systems f594065faf4f9067c2283a34619fc0714e79a98d "ACPI: Add fixups for AMD P-state figures" introduced a quirk to obtain the correct values by reading from AMD specific MSRs. This did cause a regression when running a kernel using that quirk under Xen which does (currently) not pass through MSR reads to the HW. Instead the guest gets a 0 in return. And this seems to cause a failure to initialize the ondemand governour (hard to say for sure as all P-states appear to run at the same frequency). While this should also be fixed in the hypervisor (to allow a guest to read that MSR), this patch is intended to work around the issue in the meantime. In discussion it turned out that indeed real HW/BIOSes may choose to not set the valid bit and thus mark the P-state as invalid. So this could be considered a fix for broken BIOSes that also works around the issue on Xen. Signed-off-by: Stefan Bader Cc: 3.7+ Acked-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 836bfe0..53e7ac9 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i) if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) || boot_cpu_data.x86 == 0x11) { rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); + /* + * MSR C001_0064+: + * Bit 63: PstateEn. Read-write. If set, the P-state is valid. + */ + if (!(hi & BIT(31))) + return; + fid = lo & 0x3f; did = (lo >> 6) & 7; if (boot_cpu_data.x86 == 0x10) -- cgit v0.10.2 From 2c5de558cd228e6d9ae633fb318f18942c7248f1 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 02:32:58 +0200 Subject: i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 20d41bf..832f16e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -803,7 +803,7 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) if (stat & OMAP_I2C_STAT_AL) { dev_err(dev->dev, "Arbitration lost\n"); dev->cmd_err |= OMAP_I2C_STAT_AL; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); } return -EIO; -- cgit v0.10.2 From 9eb13cf3ecf67a0ff3114d6b66878a1149f96b7d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 20 Jan 2013 20:37:02 +0200 Subject: i2c: omap: fix draining irq handling Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen Acked-by: Felipe Balbi Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 832f16e..4cc2f05 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -963,7 +963,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) i2c_omap_errata_i207(dev, stat); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); - break; + continue; } if (stat & OMAP_I2C_STAT_RRDY) { @@ -989,7 +989,7 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) break; omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); - break; + continue; } if (stat & OMAP_I2C_STAT_XRDY) { -- cgit v0.10.2 From 9dd3162deb67e9d2dc08af8bedea61c41fae85a8 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 17 Jan 2013 12:31:04 +0200 Subject: i2c-designware: add missing MODULE_LICENSE The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index cbba7db..f5258c2 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -34,6 +34,7 @@ #include #include #include +#include #include "i2c-designware-core.h" /* @@ -725,3 +726,6 @@ u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) return dw_readl(dev, DW_IC_COMP_PARAM_1); } EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); + +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 910ffdb18a6408e14febbb6e4b6840fd2c928c82 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:47:41 +0100 Subject: ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up() Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/include/linux/sched.h b/include/linux/sched.h index 6fc8f45..d2112477 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2714,7 +2714,16 @@ static inline void thread_group_cputime_init(struct signal_struct *sig) extern void recalc_sigpending_and_wake(struct task_struct *t); extern void recalc_sigpending(void); -extern void signal_wake_up(struct task_struct *t, int resume_stopped); +extern void signal_wake_up_state(struct task_struct *t, unsigned int state); + +static inline void signal_wake_up(struct task_struct *t, bool resume) +{ + signal_wake_up_state(t, resume ? TASK_WAKEKILL : 0); +} +static inline void ptrace_signal_wake_up(struct task_struct *t, bool resume) +{ + signal_wake_up_state(t, resume ? __TASK_TRACED : 0); +} /* * Wrappers for p->thread_info->cpu access. No-op on UP. diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 612a561..62f7c27 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -117,7 +117,7 @@ void __ptrace_unlink(struct task_struct *child) * TASK_KILLABLE sleeps. */ if (child->jobctl & JOBCTL_STOP_PENDING || task_is_traced(child)) - signal_wake_up(child, task_is_traced(child)); + ptrace_signal_wake_up(child, true); spin_unlock(&child->sighand->siglock); } @@ -317,7 +317,7 @@ static int ptrace_attach(struct task_struct *task, long request, */ if (task_is_stopped(task) && task_set_jobctl_pending(task, JOBCTL_TRAP_STOP | JOBCTL_TRAPPING)) - signal_wake_up(task, 1); + signal_wake_up_state(task, __TASK_STOPPED); spin_unlock(&task->sighand->siglock); @@ -737,7 +737,7 @@ int ptrace_request(struct task_struct *child, long request, * tracee into STOP. */ if (likely(task_set_jobctl_pending(child, JOBCTL_TRAP_STOP))) - signal_wake_up(child, child->jobctl & JOBCTL_LISTENING); + ptrace_signal_wake_up(child, child->jobctl & JOBCTL_LISTENING); unlock_task_sighand(child, &flags); ret = 0; @@ -763,7 +763,7 @@ int ptrace_request(struct task_struct *child, long request, * start of this trap and now. Trigger re-trap. */ if (child->jobctl & JOBCTL_TRAP_NOTIFY) - signal_wake_up(child, true); + ptrace_signal_wake_up(child, true); ret = 0; } unlock_task_sighand(child, &flags); diff --git a/kernel/signal.c b/kernel/signal.c index 53cd5c4..6e97aa6 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -680,23 +680,17 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) * No need to set need_resched since signal event passing * goes through ->blocked */ -void signal_wake_up(struct task_struct *t, int resume) +void signal_wake_up_state(struct task_struct *t, unsigned int state) { - unsigned int mask; - set_tsk_thread_flag(t, TIF_SIGPENDING); - /* - * For SIGKILL, we want to wake it up in the stopped/traced/killable + * TASK_WAKEKILL also means wake it up in the stopped/traced/killable * case. We don't check t->state here because there is a race with it * executing another processor and just now entering stopped state. * By using wake_up_state, we ensure the process will wake up and * handle its death signal. */ - mask = TASK_INTERRUPTIBLE; - if (resume) - mask |= TASK_WAKEKILL; - if (!wake_up_state(t, mask)) + if (!wake_up_state(t, state | TASK_INTERRUPTIBLE)) kick_process(t); } @@ -844,7 +838,7 @@ static void ptrace_trap_notify(struct task_struct *t) assert_spin_locked(&t->sighand->siglock); task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY); - signal_wake_up(t, t->jobctl & JOBCTL_LISTENING); + ptrace_signal_wake_up(t, t->jobctl & JOBCTL_LISTENING); } /* -- cgit v0.10.2 From 0f815a0a700bc10547449bde6c106051a035a1b9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 11:37:35 -0500 Subject: USB: UHCI: fix IRQ race during initialization This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern Reported-by: Don Zickus Tested-by: "Huang, Adrian (ISS Linux TW)" Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4b9e9ab..4f64d24 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -447,6 +447,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) return IRQ_NONE; uhci_writew(uhci, status, USBSTS); /* Clear it */ + spin_lock(&uhci->lock); + if (unlikely(!uhci->is_initialized)) /* not yet configured */ + goto done; + if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { if (status & USBSTS_HSE) dev_err(uhci_dev(uhci), "host system error, " @@ -455,7 +459,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " @@ -473,15 +476,15 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock(&uhci->lock); } } - if (status & USBSTS_RD) + if (status & USBSTS_RD) { + spin_unlock(&uhci->lock); usb_hcd_poll_rh_status(hcd); - else { - spin_lock(&uhci->lock); + } else { uhci_scan_schedule(uhci); + done: spin_unlock(&uhci->lock); } @@ -662,9 +665,9 @@ static int uhci_start(struct usb_hcd *hcd) */ mb(); + spin_lock_irq(&uhci->lock); configure_hc(uhci); uhci->is_initialized = 1; - spin_lock_irq(&uhci->lock); start_rh(uhci); spin_unlock_irq(&uhci->lock); return 0; -- cgit v0.10.2 From 9ec6e9d3cb5192b11074f8adcedc10a6d410528a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 22 Jan 2013 11:59:58 -0500 Subject: USB: EHCI: Move definition of EHCI_STATS to ehci.h Without this, platform drivers e.g. ehci-omap.c will see a different version of struct ehci_hcd than ehci-hcd.c and break reference to 'debug_dir' and 'priv' members when CONFIG_USB_DEBUG is enabled. Signed-off-by: Roger Quadros Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c97503b..104d6348 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -74,10 +74,6 @@ static const char hcd_name [] = "ehci_hcd"; #undef VERBOSE_DEBUG #undef EHCI_URB_TRACE -#ifdef DEBUG -#define EHCI_STATS -#endif - /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9dadc71..88f0142 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -38,6 +38,10 @@ typedef __u16 __bitwise __hc16; #endif /* statistics can be kept for tuning/monitoring */ +#ifdef DEBUG +#define EHCI_STATS +#endif + struct ehci_stats { /* irq usage */ unsigned long normal; -- cgit v0.10.2 From 9ce45ef86c4c861841ba68b24341dbd9d6834c98 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:12 -0500 Subject: USB: EHCI: fix incorrect configuration test This patch (as1641) fixes a minor bug in ehci-hcd left over from when the Chipidea driver was converted to the "ehci-hcd is a library" scheme. The test for whether the Chipidea platform driver is active should be IS_ENABLED(), not defined(). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 104d6348..d09ff8f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1348,7 +1348,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ - !defined(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ -- cgit v0.10.2 From 9debc1793b36124b9304255d2e8b5b6d8b491793 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Jan 2013 12:00:26 -0500 Subject: USB: EHCI: add a name for the platform-private field This patch (as1642) adds an ehci->priv field for private use by EHCI platform drivers. The space was provided some time ago, but it didn't have a name. Until now none of the platform drivers has used this private space, but that's about to change in the next patch of this series. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 88f0142..36c3a82 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -225,6 +225,9 @@ struct ehci_hcd { /* one per controller */ #ifdef DEBUG struct dentry *debug_dir; #endif + + /* platform-specific data -- must come last */ + unsigned long priv[0] __aligned(sizeof(s64)); }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ -- cgit v0.10.2 From 9cf2b72b25f3f6a5a1a46a4f36037e66de52465c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 22 Jan 2013 15:34:40 +0000 Subject: arm64: elf: fix core dumping to match what glibc expects The kernel's internal definition of ELF_NGREG uses struct pt_regs, which means that we disagree with userspace on the size of coredumps since glibc correctly uses the user-visible struct user_pt_regs. This patch fixes our ELF_NGREG definition to use struct user_pt_regs and introduces our own ELF_CORE_COPY_REGS to convert between the user and kernel structure definitions. Cc: Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 07fea29..fe32c0e 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -26,7 +26,10 @@ typedef unsigned long elf_greg_t; -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t)) +#define ELF_CORE_COPY_REGS(dest, regs) \ + *(struct user_pt_regs *)&(dest) = (regs)->user_regs; + typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_fpsimd_state elf_fpregset_t; -- cgit v0.10.2 From f1b99392caf120d7533da260318fae0eb5053737 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Jan 2013 19:00:47 +0000 Subject: arm64: makefile: fix uname munging when setting ARCH on native machine By popular demand, arch/aarch64 is now known as arch/arm64. However, uname -m (and indeed the GNU triplet) still use aarch64 as the machine string. This patch fixes native builds of both the kernel and perf tools by updating the relevant Makefiles to munge the output of uname -m and set the ARCH variable appropriately. Cc: Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas diff --git a/Makefile b/Makefile index 253a455..2cd4c6b 100644 --- a/Makefile +++ b/Makefile @@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 891bc77..8ab05e5 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -58,7 +58,7 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) NO_PERF_REGS := 1 CC = $(CROSS_COMPILE)gcc -- cgit v0.10.2 From 9899d11f654474d2d54ea52ceaa2a1f4db3abd68 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:48:00 +0100 Subject: ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by: Salman Qazi Reported-by: Suleiman Souhlal Suggested-by: Linus Torvalds Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index cd3b243..9b4d51d 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -165,10 +165,11 @@ void set_task_blockstep(struct task_struct *task, bool on) * Ensure irq/preemption can't change debugctl in between. * Note also that both TIF_BLOCKSTEP and debugctl should * be changed atomically wrt preemption. - * FIXME: this means that set/clear TIF_BLOCKSTEP is simply - * wrong if task != current, SIGKILL can wakeup the stopped - * tracee and set/clear can play with the running task, this - * can confuse the next __switch_to_xtra(). + * + * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if + * task is current or it can't be running, otherwise we can race + * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but + * PTRACE_KILL is not safe. */ local_irq_disable(); debugctl = get_debugctlmsr(); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 62f7c27..6cbeaae 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -122,6 +122,40 @@ void __ptrace_unlink(struct task_struct *child) spin_unlock(&child->sighand->siglock); } +/* Ensure that nothing can wake it up, even SIGKILL */ +static bool ptrace_freeze_traced(struct task_struct *task) +{ + bool ret = false; + + /* Lockless, nobody but us can set this flag */ + if (task->jobctl & JOBCTL_LISTENING) + return ret; + + spin_lock_irq(&task->sighand->siglock); + if (task_is_traced(task) && !__fatal_signal_pending(task)) { + task->state = __TASK_TRACED; + ret = true; + } + spin_unlock_irq(&task->sighand->siglock); + + return ret; +} + +static void ptrace_unfreeze_traced(struct task_struct *task) +{ + if (task->state != __TASK_TRACED) + return; + + WARN_ON(!task->ptrace || task->parent != current); + + spin_lock_irq(&task->sighand->siglock); + if (__fatal_signal_pending(task)) + wake_up_state(task, __TASK_TRACED); + else + task->state = TASK_TRACED; + spin_unlock_irq(&task->sighand->siglock); +} + /** * ptrace_check_attach - check whether ptracee is ready for ptrace operation * @child: ptracee to check for @@ -151,24 +185,29 @@ static int ptrace_check_attach(struct task_struct *child, bool ignore_state) * be changed by us so it's not changing right after this. */ read_lock(&tasklist_lock); - if ((child->ptrace & PT_PTRACED) && child->parent == current) { + if (child->ptrace && child->parent == current) { + WARN_ON(child->state == __TASK_TRACED); /* * child->sighand can't be NULL, release_task() * does ptrace_unlink() before __exit_signal(). */ - spin_lock_irq(&child->sighand->siglock); - WARN_ON_ONCE(task_is_stopped(child)); - if (ignore_state || (task_is_traced(child) && - !(child->jobctl & JOBCTL_LISTENING))) + if (ignore_state || ptrace_freeze_traced(child)) ret = 0; - spin_unlock_irq(&child->sighand->siglock); } read_unlock(&tasklist_lock); - if (!ret && !ignore_state) - ret = wait_task_inactive(child, TASK_TRACED) ? 0 : -ESRCH; + if (!ret && !ignore_state) { + if (!wait_task_inactive(child, __TASK_TRACED)) { + /* + * This can only happen if may_ptrace_stop() fails and + * ptrace_stop() changes ->state back to TASK_RUNNING, + * so we should not worry about leaking __TASK_TRACED. + */ + WARN_ON(child->state == __TASK_TRACED); + ret = -ESRCH; + } + } - /* All systems go.. */ return ret; } @@ -900,6 +939,8 @@ SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr, goto out_put_task_struct; ret = arch_ptrace(child, request, addr, data); + if (ret || request != PTRACE_DETACH) + ptrace_unfreeze_traced(child); out_put_task_struct: put_task_struct(child); @@ -1039,8 +1080,11 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid, ret = ptrace_check_attach(child, request == PTRACE_KILL || request == PTRACE_INTERRUPT); - if (!ret) + if (!ret) { ret = compat_arch_ptrace(child, request, addr, data); + if (ret || request != PTRACE_DETACH) + ptrace_unfreeze_traced(child); + } out_put_task_struct: put_task_struct(child); diff --git a/kernel/signal.c b/kernel/signal.c index 6e97aa6..3d09cf6 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1794,6 +1794,10 @@ static inline int may_ptrace_stop(void) * If SIGKILL was already sent before the caller unlocked * ->siglock we must see ->core_state != NULL. Otherwise it * is safe to enter schedule(). + * + * This is almost outdated, a task with the pending SIGKILL can't + * block in TASK_TRACED. But PTRACE_EVENT_EXIT can be reported + * after SIGKILL was already dequeued. */ if (unlikely(current->mm->core_state) && unlikely(current->mm == current->parent->mm)) @@ -1919,6 +1923,7 @@ static void ptrace_stop(int exit_code, int why, int clear_code, siginfo_t *info) if (gstop_done) do_notify_parent_cldstop(current, false, why); + /* tasklist protects us from ptrace_freeze_traced() */ __set_current_state(TASK_RUNNING); if (clear_code) current->exit_code = 0; -- cgit v0.10.2 From 9067ac85d533651b98c2ff903182a20cbb361fcb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 21 Jan 2013 20:48:17 +0100 Subject: wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task wake_up_process() should never wakeup a TASK_STOPPED/TRACED task. Change it to use TASK_NORMAL and add the WARN_ON(). TASK_ALL has no other users, probably can be killed. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..26058d0 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1523,7 +1523,8 @@ out: */ int wake_up_process(struct task_struct *p) { - return try_to_wake_up(p, TASK_ALL, 0); + WARN_ON(task_is_stopped_or_traced(p)); + return try_to_wake_up(p, TASK_NORMAL, 0); } EXPORT_SYMBOL(wake_up_process); -- cgit v0.10.2 From efa17194581bdfca0986dabc178908bd7c21ba00 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 22 Jan 2013 22:33:46 +0100 Subject: cpufreq: Add module aliases for acpi-cpufreq The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett Tested-by: Leonid Isaev Acked-by: Borislav Petkov Cc: 3.7+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 0d048f6..7b0d49d 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict, late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); +static const struct x86_cpu_id acpi_cpufreq_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_ACPI), + X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + MODULE_ALIAS("acpi"); -- cgit v0.10.2 From f56c3196f251012de9b3ebaff55732a9074fdaae Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Jan 2013 16:15:15 -0800 Subject: async: fix __lowest_in_progress() Commit 083b804c4d3e ("async: use workqueue for worker pool") made it possible that async jobs are moved from pending to running out-of-order. While pending async jobs will be queued and dispatched for execution in the same order, nothing guarantees they'll enter "1) move self to the running queue" of async_run_entry_fn() in the same order. Before the conversion, async implemented its own worker pool. An async worker, upon being woken up, fetches the first item from the pending list, which kept the executing lists sorted. The conversion to workqueue was done by adding work_struct to each async_entry and async just schedules the work item. The queueing and dispatching of such work items are still in order but now each worker thread is associated with a specific async_entry and moves that specific async_entry to the executing list. So, depending on which worker reaches that point earlier, which is non-deterministic, we may end up moving an async_entry with larger cookie before one with smaller one. This broke __lowest_in_progress(). running->domain may not be properly sorted and is not guaranteed to contain lower cookies than pending list when not empty. Fix it by ensuring sort-inserting to the running list and always looking at both pending and running when trying to determine the lowest cookie. Over time, the async synchronization implementation became quite messy. We better restructure it such that each async_entry is linked to two lists - one global and one per domain - and not move it when execution starts. There's no reason to distinguish pending and running. They behave the same for synchronization purposes. Signed-off-by: Tejun Heo Cc: Arjan van de Ven Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/kernel/async.c b/kernel/async.c index a1d585c..6f34904 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -86,18 +86,27 @@ static atomic_t entry_count; */ static async_cookie_t __lowest_in_progress(struct async_domain *running) { + async_cookie_t first_running = next_cookie; /* infinity value */ + async_cookie_t first_pending = next_cookie; /* ditto */ struct async_entry *entry; + /* + * Both running and pending lists are sorted but not disjoint. + * Take the first cookies from both and return the min. + */ if (!list_empty(&running->domain)) { entry = list_first_entry(&running->domain, typeof(*entry), list); - return entry->cookie; + first_running = entry->cookie; } - list_for_each_entry(entry, &async_pending, list) - if (entry->running == running) - return entry->cookie; + list_for_each_entry(entry, &async_pending, list) { + if (entry->running == running) { + first_pending = entry->cookie; + break; + } + } - return next_cookie; /* "infinity" value */ + return min(first_running, first_pending); } static async_cookie_t lowest_in_progress(struct async_domain *running) @@ -118,13 +127,17 @@ static void async_run_entry_fn(struct work_struct *work) { struct async_entry *entry = container_of(work, struct async_entry, work); + struct async_entry *pos; unsigned long flags; ktime_t uninitialized_var(calltime), delta, rettime; struct async_domain *running = entry->running; - /* 1) move self to the running queue */ + /* 1) move self to the running queue, make sure it stays sorted */ spin_lock_irqsave(&async_lock, flags); - list_move_tail(&entry->list, &running->domain); + list_for_each_entry_reverse(pos, &running->domain, list) + if (entry->cookie < pos->cookie) + break; + list_move_tail(&entry->list, &pos->list); spin_unlock_irqrestore(&async_lock, flags); /* 2) run (and print duration) */ -- cgit v0.10.2 From d6f620a457aa4c5c2e8d1a079a1236216c445aba Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 15 Jan 2013 19:44:26 +0100 Subject: clk: mvebu/clk-cpu.c: fix memory leakage the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding Acked-by: Jason Cooper Acked-by: Gregory CLEMENT Acked-by: Mike Turquette Signed-off-by: Jason Cooper diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index ff004578..9dd2551 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node) clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); if (WARN_ON(!clks)) - return; + goto clks_out; for_each_node_by_type(dn, "cpu") { struct clk_init_data init; @@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node) int cpu, err; if (WARN_ON(!clk_name)) - return; + goto bail_out; err = of_property_read_u32(dn, "reg", &cpu); if (WARN_ON(err)) - return; + goto bail_out; sprintf(clk_name, "cpu%d", cpu); parent_clk = of_clk_get(node, 0); @@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node) return; bail_out: kfree(clks); + while(ncpus--) + kfree(cpuclk[ncpus].clk_name); +clks_out: kfree(cpuclk); } -- cgit v0.10.2 From f42abc72da2e77efefd547562a92ddd18926b48b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 16 Jan 2013 14:13:56 +0100 Subject: mmc: mvsdio: use devm_ API to simplify/correct error paths. There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index de4c20b..f8dd361 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -50,8 +50,6 @@ struct mvsd_host { struct timer_list timer; struct mmc_host *mmc; struct device *dev; - struct resource *res; - int irq; struct clk *clk; int gpio_card_detect; int gpio_write_protect; @@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev) if (!r || irq < 0 || !mvsd_data) return -ENXIO; - r = request_mem_region(r->start, SZ_1K, DRIVER_NAME); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; @@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->res = r; host->base_clock = mvsd_data->clock / 2; + host->clk = ERR_PTR(-EINVAL); mmc->ops = &mvsd_ops; @@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = ioremap(r->start, SZ_4K); + host->base = devm_request_and_ioremap(&pdev->dev, r); if (!host->base) { ret = -ENOMEM; goto out; @@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev) mvsd_power_down(host); - ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host); if (ret) { pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq); goto out; - } else - host->irq = irq; + } /* Not all platforms can gate the clock, so it is not an error if the clock does not exists. */ - host->clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) { + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) clk_prepare_enable(host->clk); - } if (mvsd_data->gpio_card_detect) { - ret = gpio_request(mvsd_data->gpio_card_detect, - DRIVER_NAME " cd"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_card_detect, + GPIOF_IN, DRIVER_NAME " cd"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_card_detect); irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = request_irq(irq, mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); + ret = devm_request_irq(&pdev->dev, irq, + mvsd_card_detect_irq, + IRQ_TYPE_EDGE_RISING | + IRQ_TYPE_EDGE_FALLING, + DRIVER_NAME " cd", host); if (ret == 0) host->gpio_card_detect = mvsd_data->gpio_card_detect; else - gpio_free(mvsd_data->gpio_card_detect); + devm_gpio_free(&pdev->dev, + mvsd_data->gpio_card_detect); } } if (!host->gpio_card_detect) mmc->caps |= MMC_CAP_NEEDS_POLL; if (mvsd_data->gpio_write_protect) { - ret = gpio_request(mvsd_data->gpio_write_protect, - DRIVER_NAME " wp"); + ret = devm_gpio_request_one(&pdev->dev, + mvsd_data->gpio_write_protect, + GPIOF_IN, DRIVER_NAME " wp"); if (ret == 0) { - gpio_direction_input(mvsd_data->gpio_write_protect); host->gpio_write_protect = mvsd_data->gpio_write_protect; } @@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev) return 0; out: - if (host) { - if (host->irq) - free_irq(host->irq, host); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - if (host->base) - iounmap(host->base); - } - if (r) - release_resource(r); - if (mmc) - if (!IS_ERR_OR_NULL(host->clk)) { + if (mmc) { + if (!IS_ERR(host->clk)) clk_disable_unprepare(host->clk); - clk_put(host->clk); - } mmc_free_host(mmc); + } return ret; } @@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); - if (mmc) { - struct mvsd_host *host = mmc_priv(mmc); + struct mvsd_host *host = mmc_priv(mmc); - if (host->gpio_card_detect) { - free_irq(gpio_to_irq(host->gpio_card_detect), host); - gpio_free(host->gpio_card_detect); - } - mmc_remove_host(mmc); - free_irq(host->irq, host); - if (host->gpio_write_protect) - gpio_free(host->gpio_write_protect); - del_timer_sync(&host->timer); - mvsd_power_down(host); - iounmap(host->base); - release_resource(host->res); + mmc_remove_host(mmc); + del_timer_sync(&host->timer); + mvsd_power_down(host); + + if (!IS_ERR(host->clk)) + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); - if (!IS_ERR(host->clk)) { - clk_disable_unprepare(host->clk); - clk_put(host->clk); - } - mmc_free_host(mmc); - } platform_set_drvdata(pdev, NULL); return 0; } -- cgit v0.10.2 From 09d75bc7d217bd8868899028a98b53423e6b3324 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 22 Jan 2013 20:46:33 +0100 Subject: ARM: kirkwood: fix missing #interrupt-cells property The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 110d6cb..d6ab442 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; -- cgit v0.10.2 From a7e2ca17039edb5f782be519eaf9d8ea500ba7cc Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 21 Jan 2013 13:12:42 +0200 Subject: Revert "drivers/misc/ti-st: remove gpio handling" This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable [3.7] Acked-by: Tony Lindgren Signed-off-by: Luciano Coelho Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 9ff942a..83269f1 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -468,6 +468,11 @@ long st_kim_start(void *kim_data) if (pdata->chip_enable) pdata->chip_enable(kim_gdata); + /* Configure BT nShutdown to HIGH state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(5); /* FIXME: a proper toggle */ + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(100); /* re-initialize the completion */ INIT_COMPLETION(kim_gdata->ldisc_installed); /* send notification to UIM */ @@ -509,7 +514,8 @@ long st_kim_start(void *kim_data) * (b) upon failure to either install ldisc or download firmware. * The function is responsible to (a) notify UIM about un-installation, * (b) flush UART if the ldisc was installed. - * (c) invoke platform's chip disabling routine. + * (c) reset BT_EN - pull down nshutdown at the end. + * (d) invoke platform's chip disabling routine. */ long st_kim_stop(void *kim_data) { @@ -541,6 +547,13 @@ long st_kim_stop(void *kim_data) err = -ETIMEDOUT; } + /* By default configure BT nShutdown to LOW state */ + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(1); + gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + /* platform specific disable */ if (pdata->chip_disable) pdata->chip_disable(kim_gdata); @@ -733,6 +746,20 @@ static int kim_probe(struct platform_device *pdev) /* refer to itself */ kim_gdata->core_data->kim_data = kim_gdata; + /* Claim the chip enable nShutdown gpio from the system */ + kim_gdata->nshutdown = pdata->nshutdown_gpio; + err = gpio_request(kim_gdata->nshutdown, "kim"); + if (unlikely(err)) { + pr_err(" gpio %ld request failed ", kim_gdata->nshutdown); + return err; + } + + /* Configure nShutdown GPIO as output=0 */ + err = gpio_direction_output(kim_gdata->nshutdown, 0); + if (unlikely(err)) { + pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown); + return err; + } /* get reference of pdev for request_firmware */ kim_gdata->kim_pdev = pdev; @@ -779,10 +806,18 @@ err_core_init: static int kim_remove(struct platform_device *pdev) { + /* free the GPIOs requested */ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; struct kim_data_s *kim_gdata; kim_gdata = dev_get_drvdata(&pdev->dev); + /* Free the Bluetooth/FM/GPIO + * nShutdown gpio from the system + */ + gpio_free(pdata->nshutdown_gpio); + pr_info("nshutdown GPIO Freed"); + debugfs_remove_recursive(kim_debugfs_dir); sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp); pr_info("sysfs entries removed"); -- cgit v0.10.2 From 10b8c7dff5d3633b69e77f57d404dab54ead3787 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 22 Jan 2013 19:20:58 -0500 Subject: fs/cifs/cifs_dfs_ref.c: fix potential memory leakage When it goes to error through line 144, the memory allocated to *devname is not freed, and the caller doesn't free it either in line 250. So we free the memroy of *devname in function cifs_compose_mount_options() when it goes to error. Signed-off-by: Cong Ding CC: stable Reviewed-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index ce5cbd7..210fce2 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -226,6 +226,8 @@ compose_mount_options_out: compose_mount_options_err: kfree(mountdata); mountdata = ERR_PTR(rc); + kfree(*devname); + *devname = NULL; goto compose_mount_options_out; } -- cgit v0.10.2 From 45976c01b7be338efc9d3c911293491a981ed87a Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:38:43 +0000 Subject: ARM: at91/at91-pinctrl documentation: fix typo and add some details The relation between PIN_BANK numbers and pio letters wasn't made very clear. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3a26812..bc50899 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,7 +81,8 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = . - The PERIPH 0 means gpio. + The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... + PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -126,7 +127,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + 1 15 0x1 0x1>; /* PB15 periph A with pullup */ }; }; }; -- cgit v0.10.2 From c89cec3a4037f4aebf948d0f9c984c4823478c66 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:41:21 +0000 Subject: ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3a47cf9..e9c4290 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -154,12 +154,12 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 27 0x3 0x0>; /* PC27 periph C */ + <2 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 28 0x3 0x0>; /* PC28 periph C */ + <2 28 0x3 0x0>; /* PC28 periph C */ }; }; @@ -172,46 +172,46 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 0 0x2 0x0>; /* PB0 periph B */ + <1 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 1 0x2 0x0>; /* PB1 periph B */ + <1 1 0x2 0x0>; /* PB1 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <3 23 0x2 0x1 /* PC22 periph B with pullup */ - 3 23 0x2 0x0>; /* PC23 periph B */ + <2 23 0x2 0x1 /* PC22 periph B with pullup */ + 2 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 24 0x2 0x0>; /* PC24 periph B */ + <2 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 25 0x2 0x0>; /* PC25 periph B */ + <2 25 0x2 0x0>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <3 8 0x3 0x0 /* PC8 periph C */ - 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + <2 8 0x3 0x0 /* PC8 periph C */ + 2 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <3 16 0x3 0x0 /* PC16 periph C */ - 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + <2 16 0x3 0x0 /* PC16 periph C */ + 2 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; -- cgit v0.10.2 From 1bab02ec1b9353ac928b8fe57d8e26012930c8b2 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 18 Jan 2013 16:42:28 +0000 Subject: ARM: at91/at91sam9x5 DTS: add SCK USART pins The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e9c4290..cb711a5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -143,6 +143,11 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; }; usart1 { @@ -161,6 +166,11 @@ atmel,pins = <2 28 0x3 0x0>; /* PC28 periph C */ }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <2 28 0x3 0x0>; /* PC29 periph C */ + }; }; usart2 { @@ -179,6 +189,11 @@ atmel,pins = <1 1 0x2 0x0>; /* PB1 periph B */ }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <1 2 0x2 0x0>; /* PB2 periph B */ + }; }; usart3 { @@ -197,6 +212,11 @@ atmel,pins = <2 25 0x2 0x0>; /* PC25 periph B */ }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <2 26 0x2 0x0>; /* PC26 periph B */ + }; }; uart0 { -- cgit v0.10.2 From 334c9e8d6d05be132792a855dcc637773d44cad3 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 4 Dec 2012 18:10:56 +0000 Subject: ARM: at91: fix gpios on i2c-gpio for RM9200 DT Signed-off-by: Joachim Eastwood Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index e154f24..222047f 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 25 0 /* sda */ + &pioA 26 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; -- cgit v0.10.2 From 36224d0fe0f34cdde66a381708853ebadeac799c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 23 Dec 2012 18:07:49 +0000 Subject: ARM: at91: rm9200: remake the BGA as default version Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772 (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.3] Signed-off-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 9ee866c..4b67847 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; -- cgit v0.10.2 From b45c998ea79224b5f8ac718d9be55cacd17fab18 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 13 Dec 2012 14:03:08 +0000 Subject: ARM: at91/dts: add macb mii pinctrl config for kizbox This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index e8814fe..b4dc3ed 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -48,6 +48,8 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; -- cgit v0.10.2 From 2e06e92c758b768baaacc061aafa7f710b74ea02 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 23 Jan 2013 10:03:23 +0100 Subject: ARM: at91/at91_dt_defconfig: remove memory specification to cmdline No need for this cmdline option as we are using DT. Moreover this defconfig is targeted to multiple SoC/boards: this option was nonsense. Reported-by: Josh Wu Signed-off-by: Nicolas Ferre diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index b175577..a353ff6 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -31,7 +31,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -- cgit v0.10.2 From 581d6299746ed264bcddc48a611343cedd10ba77 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 23 Jan 2013 10:06:46 +0100 Subject: ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig Reported-by: Josh Wu Signed-off-by: Nicolas Ferre diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index a353ff6..1ea9590 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y +CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 -- cgit v0.10.2 From 8461c2f6fdd3ef0b26f931d561435df8cae2a9a5 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Wed, 23 Jan 2013 09:50:02 +0100 Subject: ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cb711a5..8ecca69 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -260,14 +260,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PA8 periph A */ - 1 11 0x1 0x0 /* PA11 periph A */ - 1 12 0x1 0x0 /* PA12 periph A */ - 1 13 0x1 0x0 /* PA13 periph A */ - 1 14 0x1 0x0 /* PA14 periph A */ - 1 15 0x1 0x0 /* PA15 periph A */ - 1 16 0x1 0x0 /* PA16 periph A */ - 1 17 0x1 0x0>; /* PA17 periph A */ + <1 8 0x1 0x0 /* PB8 periph A */ + 1 11 0x1 0x0 /* PB11 periph A */ + 1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ }; }; -- cgit v0.10.2 From 31614bb89b102570367fc7428dc029b8d7fc615a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 23 Jan 2013 15:58:40 +0100 Subject: ALSA: hda - Fix inconsistent pin states after resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit [26a6cb6c: ALSA: hda - Implement a poll loop for jacks as a module parameter] introduced the polling jack detection code, but it also moved the call of snd_hda_jack_set_dirty_all() in the resume path after resume/init ops call. This caused a regression when the jack state has been changed during power-down (e.g. in the power save mode). Since the driver doesn't probe the new jack state but keeps using the cached value due to no dirty flag, the pin state remains also as if the jack is still plugged. The fix is simply moving snd_hda_jack_set_dirty_all() to the original position. Reported-by: Manolo Díaz Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index b8fb0a5..822df97 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3654,6 +3654,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) hda_set_power_state(codec, AC_PWRST_D0); restore_shutup_pins(codec); hda_exec_init_verbs(codec); + snd_hda_jack_set_dirty_all(codec); if (codec->patch_ops.resume) codec->patch_ops.resume(codec); else { @@ -3665,10 +3666,8 @@ static void hda_call_codec_resume(struct hda_codec *codec) if (codec->jackpoll_interval) hda_jackpoll_work(&codec->jackpoll_work.work); - else { - snd_hda_jack_set_dirty_all(codec); + else snd_hda_jack_report_sync(codec); - } codec->in_pm = 0; snd_hda_power_down(codec); /* flag down before returning */ -- cgit v0.10.2 From 6d26b3a187467299851e758f60121a2a71a7962d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 23 Jan 2013 14:38:16 +0000 Subject: MAINTAINERS: remove me Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 3105c48..4e734ed 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6585,9 +6585,7 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS -M: Alan Cox L: linux-serial@vger.kernel.org -S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -- cgit v0.10.2 From dba63b2f733ebfd89bbb15e8fe8ca10fd3871a7f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Jan 2013 13:26:15 -0500 Subject: USB: EHCI: fix build error in ehci-mxc This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d6bb128..3a21c5d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -148,7 +148,7 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale i.MX on-chip EHCI USB controller" + tristate "Support for Freescale i.MX on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1eb4c30..001fbff 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d09ff8f..09537b2 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1246,11 +1246,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_fsl_driver #endif -#ifdef CONFIG_USB_EHCI_MXC -#include "ehci-mxc.c" -#define PLATFORM_DRIVER ehci_mxc_driver -#endif - #ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver @@ -1349,6 +1344,7 @@ MODULE_LICENSE ("GPL"); #if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \ !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index ec7f5d2..dedb80b 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -17,75 +17,38 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include +#include +#include #include #include #include #include #include #include +#include +#include #include #include +#include "ehci.h" + +#define DRIVER_DESC "Freescale On-Chip EHCI Host driver" + +static const char hcd_name[] = "ehci-mxc"; + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { struct clk *usbclk, *ahbclk, *phyclk; - struct usb_hcd *hcd; }; -/* called during probe() after chip reset completes */ -static int ehci_mxc_setup(struct usb_hcd *hcd) -{ - hcd->has_tt = 1; - - return ehci_setup(hcd); -} +static struct hc_driver __read_mostly ehci_mxc_hc_driver; -static const struct hc_driver ehci_mxc_hc_driver = { - .description = hcd_name, - .product_desc = "Freescale On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ehci_mxc_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { + .extra_priv_size = sizeof(struct ehci_mxc_priv), }; static int ehci_mxc_drv_probe(struct platform_device *pdev) @@ -112,12 +75,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto err_alloc; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Found HC with no register addr. Check setup!\n"); @@ -135,6 +92,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) goto err_alloc; } + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + priv = (struct ehci_mxc_priv *) ehci->priv; + /* enable clocks */ priv->usbclk = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(priv->usbclk)) { @@ -169,8 +130,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) mdelay(10); } - ehci = hcd_to_ehci(hcd); - /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; ehci->regs = hcd->regs + 0x100 + @@ -198,8 +157,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } } - priv->hcd = hcd; - platform_set_drvdata(pdev, priv); + platform_set_drvdata(pdev, hcd); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) @@ -244,8 +202,11 @@ err_alloc: static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv; + + usb_remove_hcd(hcd); if (pdata && pdata->exit) pdata->exit(pdev); @@ -253,23 +214,20 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) if (pdata->otg) usb_phy_shutdown(pdata->otg); - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - clk_disable_unprepare(priv->usbclk); clk_disable_unprepare(priv->ahbclk); if (priv->phyclk) clk_disable_unprepare(priv->phyclk); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); return 0; } static void ehci_mxc_drv_shutdown(struct platform_device *pdev) { - struct ehci_mxc_priv *priv = platform_get_drvdata(pdev); - struct usb_hcd *hcd = priv->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -279,9 +237,31 @@ MODULE_ALIAS("platform:mxc-ehci"); static struct platform_driver ehci_mxc_driver = { .probe = ehci_mxc_drv_probe, - .remove = __exit_p(ehci_mxc_drv_remove), + .remove = ehci_mxc_drv_remove, .shutdown = ehci_mxc_drv_shutdown, .driver = { .name = "mxc-ehci", }, }; + +static int __init ehci_mxc_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides); + return platform_driver_register(&ehci_mxc_driver); +} +module_init(ehci_mxc_init); + +static void __exit ehci_mxc_cleanup(void) +{ + platform_driver_unregister(&ehci_mxc_driver); +} +module_exit(ehci_mxc_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Sascha Hauer"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 5e30bbb723415fb94a098e314d1908a39a7e50a2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 23 Jan 2013 15:45:23 -0800 Subject: MAINTAINERS: Someone needs to watch over the serial drivers Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 4e734ed..8ae709e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6585,7 +6585,9 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS +M: Greg Kroah-Hartman L: linux-serial@vger.kernel.org +S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -- cgit v0.10.2 From 1585defb4ceca98b12bd6fba6802c22e77e172bb Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 22 Jan 2013 10:56:40 +0000 Subject: ARM: vexpress: extend the MPIDR range used for pen release check In ARM multi-cluster systems the MPIDR affinity level 0 cannot be used as a single cpu identifier, affinity levels 1 and 2 must be taken into account as well. This patch extends the MPIDR usage to affinity levels 1 and 2 in versatile secondary cores start up code in order to compare the passed pen_release value with the full-blown affinity mask. Signed-off-by: Lorenzo Pieralisi Signed-off-by: Liviu Dudau Acked-by: Nicolas Pitre Signed-off-by: Pawel Moll diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index dd703ef..b178d44 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -20,7 +20,7 @@ */ ENTRY(versatile_secondary_startup) mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 + bic r0, #0xff000000 adr r4, 1f ldmia r4, {r5, r6} sub r4, r4, r5 -- cgit v0.10.2 From ab838bc9c2b9b3afc64d92928dfae9e09fa5b467 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Thu, 24 Jan 2013 11:48:54 +0000 Subject: ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree As the kernel is able to cope with multiple clusters, uncomment the A7 cores in the Device Tree for V2P-CA15_A7 tile, making all 5 cores available to the user. Signed-off-by: Pawel Moll diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1fc405a..cf8071a 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,7 +45,6 @@ reg = <1>; }; -/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -63,7 +62,6 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; -*/ }; memory@80000000 { -- cgit v0.10.2 From 52666298aebe5e9ab28a773ee61d2ce81fa097bb Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 27 Nov 2012 16:48:50 +0000 Subject: mfd: vexpress-sysreg: Don't skip initialization on probe The vexpress-sysreg driver does not have to be initialized early, when the platform doesn't require this. Unfortunately in such case it wasn't initialized correctly - master site lookup and config bridge registration were missing. Fixed now. Signed-off-by: Pawel Moll diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index e5d8f63..77048b1 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -313,19 +313,11 @@ static void vexpress_sysreg_config_complete(unsigned long data) } -void __init vexpress_sysreg_early_init(void __iomem *base) +void __init vexpress_sysreg_setup(struct device_node *node) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); - - if (node) - base = of_iomap(node, 0); - - if (WARN_ON(!base)) + if (WARN_ON(!vexpress_sysreg_base)) return; - vexpress_sysreg_base = base; - if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE) vexpress_master_site = VEXPRESS_SITE_DB2; else @@ -336,9 +328,23 @@ void __init vexpress_sysreg_early_init(void __iomem *base) WARN_ON(!vexpress_sysreg_config_bridge); } +void __init vexpress_sysreg_early_init(void __iomem *base) +{ + vexpress_sysreg_base = base; + vexpress_sysreg_setup(NULL); +} + void __init vexpress_sysreg_of_early_init(void) { - vexpress_sysreg_early_init(NULL); + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + if (node) { + vexpress_sysreg_base = of_iomap(node, 0); + vexpress_sysreg_setup(node); + } else { + pr_info("vexpress-sysreg: No Device Tree node found."); + } } @@ -426,9 +432,11 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return -EBUSY; } - if (!vexpress_sysreg_base) + if (!vexpress_sysreg_base) { vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + vexpress_sysreg_setup(pdev->dev.of_node); + } if (!vexpress_sysreg_base) { dev_err(&pdev->dev, "Failed to obtain base address!\n"); -- cgit v0.10.2 From 201a90389424d6771d24fc5d72f7e34cb4a8f967 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 24 Jan 2013 12:02:07 -0500 Subject: Btrfs: do not allow logged extents to be merged or removed We drop the extent map tree lock while we're logging extents, so somebody could come in and merge another extent into this one and screw up our logging, or they could even remove us from the list which would keep us from logging the extent or freeing our ref on it, so we need to make sure to not clear LOGGING until after the extent is logged, and then we can merge it to adjacent extents. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index fff2c28..ed88f5e 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -171,6 +171,10 @@ static int mergable_maps(struct extent_map *prev, struct extent_map *next) if (test_bit(EXTENT_FLAG_COMPRESSED, &prev->flags)) return 0; + if (test_bit(EXTENT_FLAG_LOGGING, &prev->flags) || + test_bit(EXTENT_FLAG_LOGGING, &next->flags)) + return 0; + if (extent_map_end(prev) == next->start && prev->flags == next->flags && prev->bdev == next->bdev && @@ -256,7 +260,8 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len, if (!em) goto out; - list_move(&em->list, &tree->modified_extents); + if (!test_bit(EXTENT_FLAG_LOGGING, &em->flags)) + list_move(&em->list, &tree->modified_extents); em->generation = gen; clear_bit(EXTENT_FLAG_PINNED, &em->flags); em->mod_start = em->start; @@ -281,6 +286,12 @@ out: } +void clear_em_logging(struct extent_map_tree *tree, struct extent_map *em) +{ + clear_bit(EXTENT_FLAG_LOGGING, &em->flags); + try_merge_map(tree, em); +} + /** * add_extent_mapping - add new extent map to the extent tree * @tree: tree to insert new map in diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 922943c..c6598c8 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -69,6 +69,7 @@ void free_extent_map(struct extent_map *em); int __init extent_map_init(void); void extent_map_exit(void); int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len, u64 gen); +void clear_em_logging(struct extent_map_tree *tree, struct extent_map *em); struct extent_map *search_extent_mapping(struct extent_map_tree *tree, u64 start, u64 len); #endif diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 83186c7..de8899b 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3410,13 +3410,13 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans, em = list_entry(extents.next, struct extent_map, list); list_del_init(&em->list); - clear_bit(EXTENT_FLAG_LOGGING, &em->flags); /* * If we had an error we just need to delete everybody from our * private list. */ if (ret) { + clear_em_logging(tree, em); free_extent_map(em); continue; } @@ -3424,8 +3424,9 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans, write_unlock(&tree->lock); ret = log_one_extent(trans, inode, root, em, path); - free_extent_map(em); write_lock(&tree->lock); + clear_em_logging(tree, em); + free_extent_map(em); } WARN_ON(!list_empty(&extents)); write_unlock(&tree->lock); -- cgit v0.10.2 From b0175117b9376a69978bbe80af26fb95dddbd53e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 18 Dec 2012 11:39:19 -0500 Subject: Btrfs: fix panic when recovering tree log A user reported a BUG_ON(ret) that occured during tree log replay. Ret was -EAGAIN, so what I think happened is that we removed an extent that covered a bitmap entry and an extent entry. We remove the part from the bitmap and return -EAGAIN and then search for the next piece we want to remove, which happens to be an entire extent entry, so we just free the sucker and return. The problem is ret is still set to -EAGAIN so we trip the BUG_ON(). The user used btrfs-zero-log so I'm not 100% sure this is what happened so I've added a WARN_ON() to catch the other possibility. Thanks, Reported-by: Jan Steffens Signed-off-by: Josef Bacik diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 59ea2e4..0be7a87 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1862,11 +1862,13 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; - int ret = 0; + int ret; + bool re_search = false; spin_lock(&ctl->tree_lock); again: + ret = 0; if (!bytes) goto out_lock; @@ -1879,17 +1881,17 @@ again: info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { - /* the tree logging code might be calling us before we - * have fully loaded the free space rbtree for this - * block group. So it is possible the entry won't - * be in the rbtree yet at all. The caching code - * will make sure not to put it in the rbtree if - * the logging code has pinned it. + /* + * If we found a partial bit of our free space in a + * bitmap but then couldn't find the other part this may + * be a problem, so WARN about it. */ + WARN_ON(re_search); goto out_lock; } } + re_search = false; if (!info->bitmap) { unlink_free_space(ctl, info); if (offset == info->offset) { @@ -1935,8 +1937,10 @@ again: } ret = remove_from_bitmap(ctl, info, &offset, &bytes); - if (ret == -EAGAIN) + if (ret == -EAGAIN) { + re_search = true; goto again; + } BUG_ON(ret); /* logic error */ out_lock: spin_unlock(&ctl->tree_lock); -- cgit v0.10.2 From 192000dda22e02225772e862b92e7c09e5a17d08 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Sun, 6 Jan 2013 03:38:22 +0000 Subject: Btrfs: use right range to find checksum for compressed extents For compressed extents, the range of checksum is covered by disk length, and the disk length is different with ram length, so we need to use disk length instead to get us the right checksum. Signed-off-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index de8899b..9027bb1 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3357,6 +3357,11 @@ static int log_one_extent(struct btrfs_trans_handle *trans, if (skip_csum) return 0; + if (em->compress_type) { + csum_offset = 0; + csum_len = block_len; + } + /* block start is already adjusted for the file extent offset. */ ret = btrfs_lookup_csums_range(log->fs_info->csum_root, em->block_start + csum_offset, -- cgit v0.10.2 From e58dd74bccb4317e39e4b675bf9c6cd133608fac Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 22 Jan 2013 15:43:09 -0500 Subject: Btrfs: put csums on the right ordered extent I noticed a WARN_ON going off when adding csums because we were going over the amount of csum bytes that should have been allowed for an ordered extent. This is a leftover from when we used to hold the csums privately for direct io, but now we use the normal ordered sum stuff so we need to make sure and check if we've moved on to another extent so that the csums are added to the right extent. Without this we could end up with csums for bytenrs that don't have extents to cover them yet. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index bd38cef..94aa53b 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -460,8 +460,8 @@ int btrfs_csum_one_bio(struct btrfs_root *root, struct inode *inode, if (!contig) offset = page_offset(bvec->bv_page) + bvec->bv_offset; - if (!contig && (offset >= ordered->file_offset + ordered->len || - offset < ordered->file_offset)) { + if (offset >= ordered->file_offset + ordered->len || + offset < ordered->file_offset) { unsigned long bytes_left; sums->len = this_sum_bytes; this_sum_bytes = 0; -- cgit v0.10.2 From 8d25a086eb104297e3ba1fdd180b04cfaaa84797 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Jan 2013 06:27:25 +0000 Subject: Btrfs: Add ACCESS_ONCE() to transaction->abort accesses We may access and update transaction->aborted on the different CPUs without lock, so we need ACCESS_ONCE() wrapper to prevent the compiler from creating unsolicited accesses and make sure we can get the right value. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 99545df..d8982e9 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -267,7 +267,7 @@ void __btrfs_abort_transaction(struct btrfs_trans_handle *trans, function, line, errstr); return; } - trans->transaction->aborted = errno; + ACCESS_ONCE(trans->transaction->aborted) = errno; __btrfs_std_error(root->fs_info, function, line, errno, NULL); } /* diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 87fac9a..0ef2961 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1468,7 +1468,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, goto cleanup_transaction; } - if (cur_trans->aborted) { + /* Stop the commit early if ->aborted is set */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { ret = cur_trans->aborted; goto cleanup_transaction; } -- cgit v0.10.2 From 2cba30f172afdfa00f3e844f42f21eb3b972d01c Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 15 Jan 2013 06:29:12 +0000 Subject: Btrfs: fix missed transaction->aborted check First, though the current transaction->aborted check can stop the commit early and avoid unnecessary operations, it is too early, and some transaction handles don't end, those handles may set transaction->aborted after the check. Second, when we commit the transaction, we will wake up some worker threads to flush the space cache and inode cache. Those threads also allocate some transaction handles and may set transaction->aborted if some serious error happens. So we need more check for ->aborted when committing the transaction. Fix it. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 0ef2961..f154946 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1575,6 +1575,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, wait_event(cur_trans->writer_wait, atomic_read(&cur_trans->num_writers) == 1); + /* ->aborted might be set after the previous check, so check it */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { + ret = cur_trans->aborted; + goto cleanup_transaction; + } /* * the reloc mutex makes sure that we stop * the balancing code from coming in and moving @@ -1658,6 +1663,17 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, goto cleanup_transaction; } + /* + * The tasks which save the space cache and inode cache may also + * update ->aborted, check it. + */ + if (unlikely(ACCESS_ONCE(cur_trans->aborted))) { + ret = cur_trans->aborted; + mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); + goto cleanup_transaction; + } + btrfs_prepare_extent_commit(trans, root); cur_trans = root->fs_info->running_transaction; -- cgit v0.10.2 From c9f01bfe0ca411b4751d7fdbb9d602035ba52f75 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 16 Jan 2013 11:27:17 +0000 Subject: Btrfs: fix wrong max device number for single profile The max device number of single profile is 1, not 0 (0 means 'as many as possible'). Fix it. Cc: Liu Bo Signed-off-by: Miao Xie Reviewed-by: Liu Bo Signed-off-by: Josef Bacik diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 4696098..15f6efd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3507,7 +3507,7 @@ struct btrfs_raid_attr btrfs_raid_array[BTRFS_NR_RAID_TYPES] = { { 1, 1, 2, 2, 2, 2 /* raid1 */ }, { 1, 2, 1, 1, 1, 2 /* dup */ }, { 1, 1, 0, 2, 1, 1 /* raid0 */ }, - { 1, 1, 0, 1, 1, 1 /* single */ }, + { 1, 1, 1, 1, 1, 1 /* single */ }, }; static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, -- cgit v0.10.2 From 1eafa6c73791e4f312324ddad9cbcaf6a1b6052b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 22 Jan 2013 10:49:00 +0000 Subject: Btrfs: fix repeated delalloc work allocation btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/ btrfs_queue_worker for this inode, and then it locks the list, checks the head of the list again. But because we don't delete the first inode that it deals with before, it will fetch the same inode. As a result, this function allocates a huge amount of btrfs_delalloc_work structures, and OOM happens. Fix this problem by splice this delalloc list. Reported-by: Alex Lyakas Signed-off-by: Miao Xie Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 9bc6c40..ca7ace7 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7585,41 +7585,61 @@ void btrfs_wait_and_free_delalloc_work(struct btrfs_delalloc_work *work) */ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) { - struct list_head *head = &root->fs_info->delalloc_inodes; struct btrfs_inode *binode; struct inode *inode; struct btrfs_delalloc_work *work, *next; struct list_head works; + struct list_head splice; int ret = 0; if (root->fs_info->sb->s_flags & MS_RDONLY) return -EROFS; INIT_LIST_HEAD(&works); - + INIT_LIST_HEAD(&splice); +again: spin_lock(&root->fs_info->delalloc_lock); - while (!list_empty(head)) { - binode = list_entry(head->next, struct btrfs_inode, + list_splice_init(&root->fs_info->delalloc_inodes, &splice); + while (!list_empty(&splice)) { + binode = list_entry(splice.next, struct btrfs_inode, delalloc_inodes); + + list_del_init(&binode->delalloc_inodes); + inode = igrab(&binode->vfs_inode); if (!inode) - list_del_init(&binode->delalloc_inodes); + continue; + + list_add_tail(&binode->delalloc_inodes, + &root->fs_info->delalloc_inodes); spin_unlock(&root->fs_info->delalloc_lock); - if (inode) { - work = btrfs_alloc_delalloc_work(inode, 0, delay_iput); - if (!work) { - ret = -ENOMEM; - goto out; - } - list_add_tail(&work->list, &works); - btrfs_queue_worker(&root->fs_info->flush_workers, - &work->work); + + work = btrfs_alloc_delalloc_work(inode, 0, delay_iput); + if (unlikely(!work)) { + ret = -ENOMEM; + goto out; } + list_add_tail(&work->list, &works); + btrfs_queue_worker(&root->fs_info->flush_workers, + &work->work); + cond_resched(); spin_lock(&root->fs_info->delalloc_lock); } spin_unlock(&root->fs_info->delalloc_lock); + list_for_each_entry_safe(work, next, &works, list) { + list_del_init(&work->list); + btrfs_wait_and_free_delalloc_work(work); + } + + spin_lock(&root->fs_info->delalloc_lock); + if (!list_empty(&root->fs_info->delalloc_inodes)) { + spin_unlock(&root->fs_info->delalloc_lock); + goto again; + } + spin_unlock(&root->fs_info->delalloc_lock); + /* the filemap_flush will queue IO into the worker threads, but * we have to make sure the IO is actually started and that * ordered extents get created before we return @@ -7632,11 +7652,18 @@ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) atomic_read(&root->fs_info->async_delalloc_pages) == 0)); } atomic_dec(&root->fs_info->async_submit_draining); + return 0; out: list_for_each_entry_safe(work, next, &works, list) { list_del_init(&work->list); btrfs_wait_and_free_delalloc_work(work); } + + if (!list_empty_careful(&splice)) { + spin_lock(&root->fs_info->delalloc_lock); + list_splice_tail(&splice, &root->fs_info->delalloc_inodes); + spin_unlock(&root->fs_info->delalloc_lock); + } return ret; } -- cgit v0.10.2 From 949db153b6466c6f7cad5a427ecea94985927311 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 25 Jan 2013 11:57:28 -0800 Subject: Linux 3.8-rc5 diff --git a/Makefile b/Makefile index 2cd4c6b..2d3c92c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v0.10.2